From 871480933a1c28f8a9fed4c4d34d06c439a7a422 Mon Sep 17 00:00:00 2001 From: Srikant Patnaik Date: Sun, 11 Jan 2015 12:28:04 +0530 Subject: Moved, renamed, and deleted files The original directory structure was scattered and unorganized. Changes are basically to make it look like kernel structure. --- Makefile | 1604 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 1576 insertions(+), 28 deletions(-) mode change 100755 => 100644 Makefile (limited to 'Makefile') diff --git a/Makefile b/Makefile old mode 100755 new mode 100644 index 68595966..c5a95e5a --- a/Makefile +++ b/Makefile @@ -1,28 +1,1576 @@ - -all: ubin - -menuconfig: - make -C ANDROID_3.4.5 menuconfig - -ubin: - make -C ANDROID_3.4.5 ubin -j12 - -Android_defconfig: - make -C ANDROID_3.4.5 Android_defconfig - -modules: - make -C ANDROID_3.4.5 modules - #mkdir modules - #find ANDROID_3.4.5 -name "*.ko" | xargs -i cp {} `pwd`/modules/ - -modules_install: - make -C ANDROID_3.4.5 modules_install - -clean: - make -C ANDROID_3.4.5 clean - #rm -rf modules - cp ANDROID_3.4.5_Driver_Obj/* ANDROID_3.4.5/. -arf - find ANDROID_3.4.5 -name "built-in.o" -exec rm -rf {} \; - find ANDROID_3.4.5 -name ".*.o.cmd" -exec rm -rf {} \; - - +VERSION = 3 +PATCHLEVEL = 4 +SUBLEVEL = 5 +EXTRAVERSION = +NAME = Saber-toothed Squirrel + +# *DOCUMENTATION* +# To see a list of typical targets execute "make help" +# More info can be located in ./README +# Comments in this file are targeted only to the developer, do not +# expect to learn how to build the kernel reading this file. + +# Do not: +# o use make's built-in rules and variables +# (this increases performance and avoids hard-to-debug behaviour); +# o print "Entering directory ..."; +MAKEFLAGS += -rR --no-print-directory + +# Avoid funny character set dependencies +unexport LC_ALL +LC_COLLATE=C +LC_NUMERIC=C +export LC_COLLATE LC_NUMERIC + +# We are using a recursive build, so we need to do a little thinking +# to get the ordering right. +# +# Most importantly: sub-Makefiles should only ever modify files in +# their own directory. If in some directory we have a dependency on +# a file in another dir (which doesn't happen often, but it's often +# unavoidable when linking the built-in.o targets which finally +# turn into vmlinux), we will call a sub make in that other dir, and +# after that we are sure that everything which is in that other dir +# is now up to date. +# +# The only cases where we need to modify files which have global +# effects are thus separated out and done before the recursive +# descending is started. They are now explicitly listed as the +# prepare rule. + +# To put more focus on warnings, be less verbose as default +# Use 'make V=1' to see the full commands + +ifeq ("$(origin V)", "command line") + KBUILD_VERBOSE = $(V) +endif +ifndef KBUILD_VERBOSE + KBUILD_VERBOSE = 0 +endif + +# Call a source code checker (by default, "sparse") as part of the +# C compilation. +# +# Use 'make C=1' to enable checking of only re-compiled files. +# Use 'make C=2' to enable checking of *all* source files, regardless +# of whether they are re-compiled or not. +# +# See the file "Documentation/sparse.txt" for more details, including +# where to get the "sparse" utility. + +ifeq ("$(origin C)", "command line") + KBUILD_CHECKSRC = $(C) +endif +ifndef KBUILD_CHECKSRC + KBUILD_CHECKSRC = 0 +endif + +# Use make M=dir to specify directory of external module to build +# Old syntax make ... SUBDIRS=$PWD is still supported +# Setting the environment variable KBUILD_EXTMOD take precedence +ifdef SUBDIRS + KBUILD_EXTMOD ?= $(SUBDIRS) +endif + +ifeq ("$(origin M)", "command line") + KBUILD_EXTMOD := $(M) +endif + +# kbuild supports saving output files in a separate directory. +# To locate output files in a separate directory two syntaxes are supported. +# In both cases the working directory must be the root of the kernel src. +# 1) O= +# Use "make O=dir/to/store/output/files/" +# +# 2) Set KBUILD_OUTPUT +# Set the environment variable KBUILD_OUTPUT to point to the directory +# where the output files shall be placed. +# export KBUILD_OUTPUT=dir/to/store/output/files/ +# make +# +# The O= assignment takes precedence over the KBUILD_OUTPUT environment +# variable. + + +# KBUILD_SRC is set on invocation of make in OBJ directory +# KBUILD_SRC is not intended to be used by the regular user (for now) +ifeq ($(KBUILD_SRC),) + +# OK, Make called in directory where kernel src resides +# Do we want to locate output files in a separate directory? +ifeq ("$(origin O)", "command line") + KBUILD_OUTPUT := $(O) +endif + +ifeq ("$(origin W)", "command line") + export KBUILD_ENABLE_EXTRA_GCC_CHECKS := $(W) +endif + +# That's our default target when none is given on the command line +PHONY := _all +_all: + +# Cancel implicit rules on top Makefile +$(CURDIR)/Makefile Makefile: ; + +ifneq ($(KBUILD_OUTPUT),) +# Invoke a second make in the output directory, passing relevant variables +# check that the output directory actually exists +saved-output := $(KBUILD_OUTPUT) +KBUILD_OUTPUT := $(shell cd $(KBUILD_OUTPUT) && /bin/pwd) +$(if $(KBUILD_OUTPUT),, \ + $(error output directory "$(saved-output)" does not exist)) + +PHONY += $(MAKECMDGOALS) sub-make + +$(filter-out _all sub-make $(CURDIR)/Makefile, $(MAKECMDGOALS)) _all: sub-make + $(Q)@: + +sub-make: FORCE + $(if $(KBUILD_VERBOSE:1=),@)$(MAKE) -C $(KBUILD_OUTPUT) \ + KBUILD_SRC=$(CURDIR) \ + KBUILD_EXTMOD="$(KBUILD_EXTMOD)" -f $(CURDIR)/Makefile \ + $(filter-out _all sub-make,$(MAKECMDGOALS)) + +# Leave processing to above invocation of make +skip-makefile := 1 +endif # ifneq ($(KBUILD_OUTPUT),) +endif # ifeq ($(KBUILD_SRC),) + +# We process the rest of the Makefile if this is the final invocation of make +ifeq ($(skip-makefile),) + +# If building an external module we do not care about the all: rule +# but instead _all depend on modules +PHONY += all +ifeq ($(KBUILD_EXTMOD),) +_all: all +else +_all: modules +endif + +srctree := $(if $(KBUILD_SRC),$(KBUILD_SRC),$(CURDIR)) +objtree := $(CURDIR) +src := $(srctree) +obj := $(objtree) + +VPATH := $(srctree)$(if $(KBUILD_EXTMOD),:$(KBUILD_EXTMOD)) + +export srctree objtree VPATH + + +# SUBARCH tells the usermode build what the underlying arch is. That is set +# first, and if a usermode build is happening, the "ARCH=um" on the command +# line overrides the setting of ARCH below. If a native build is happening, +# then ARCH is assigned, getting whatever value it gets normally, and +# SUBARCH is subsequently ignored. + +SUBARCH := $(shell uname -m | sed -e s/i.86/i386/ -e s/sun4u/sparc64/ \ + -e s/arm.*/arm/ -e s/sa110/arm/ \ + -e s/s390x/s390/ -e s/parisc64/parisc/ \ + -e s/ppc.*/powerpc/ -e s/mips.*/mips/ \ + -e s/sh[234].*/sh/ ) + +# Cross compiling and selecting different set of gcc/bin-utils +# --------------------------------------------------------------------------- +# +# When performing cross compilation for other architectures ARCH shall be set +# to the target architecture. (See arch/* for the possibilities). +# ARCH can be set during invocation of make: +# make ARCH=ia64 +# Another way is to have ARCH set in the environment. +# The default ARCH is the host where make is executed. + +# CROSS_COMPILE specify the prefix used for all executables used +# during compilation. Only gcc and related bin-utils executables +# are prefixed with $(CROSS_COMPILE). +# CROSS_COMPILE can be set on the command line +# make CROSS_COMPILE=ia64-linux- +# Alternatively CROSS_COMPILE can be set in the environment. +# A third alternative is to store a setting in .config so that plain +# "make" in the configured kernel build directory always uses that. +# Default value for CROSS_COMPILE is not to prefix executables +# Note: Some architectures assign CROSS_COMPILE in their arch/*/Makefile +export KBUILD_BUILDHOST := $(SUBARCH) +ARCH ?= arm +CROSS_COMPILE ?= $(CONFIG_CROSS_COMPILE:"%"=%) + +# Architecture as present in compile.h +UTS_MACHINE := $(ARCH) +SRCARCH := $(ARCH) + +# Additional ARCH settings for x86 +ifeq ($(ARCH),i386) + SRCARCH := x86 +endif +ifeq ($(ARCH),x86_64) + SRCARCH := x86 +endif + +# Additional ARCH settings for sparc +ifeq ($(ARCH),sparc32) + SRCARCH := sparc +endif +ifeq ($(ARCH),sparc64) + SRCARCH := sparc +endif + +# Additional ARCH settings for sh +ifeq ($(ARCH),sh64) + SRCARCH := sh +endif + +# Additional ARCH settings for tile +ifeq ($(ARCH),tilepro) + SRCARCH := tile +endif +ifeq ($(ARCH),tilegx) + SRCARCH := tile +endif + +# Where to locate arch specific headers +hdr-arch := $(SRCARCH) + +ifeq ($(ARCH),m68knommu) + hdr-arch := m68k +endif + +KCONFIG_CONFIG ?= .config +export KCONFIG_CONFIG + +# SHELL used by kbuild +CONFIG_SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \ + else if [ -x /bin/bash ]; then echo /bin/bash; \ + else echo sh; fi ; fi) + +HOSTCC = gcc +HOSTCXX = g++ +HOSTCFLAGS = -Wall -Wmissing-prototypes -Wstrict-prototypes -O2 -fomit-frame-pointer +HOSTCXXFLAGS = -O2 + +# Decide whether to build built-in, modular, or both. +# Normally, just do built-in. + +KBUILD_MODULES := +KBUILD_BUILTIN := 1 + +# If we have only "make modules", don't compile built-in objects. +# When we're building modules with modversions, we need to consider +# the built-in objects during the descend as well, in order to +# make sure the checksums are up to date before we record them. + +ifeq ($(MAKECMDGOALS),modules) + KBUILD_BUILTIN := $(if $(CONFIG_MODVERSIONS),1) +endif + +# If we have "make modules", compile modules +# in addition to whatever we do anyway. +# Just "make" or "make all" shall build modules as well + +ifneq ($(filter all _all modules,$(MAKECMDGOALS)),) + KBUILD_MODULES := 1 +endif + +ifeq ($(MAKECMDGOALS),) + KBUILD_MODULES := 1 +endif + +export KBUILD_MODULES KBUILD_BUILTIN +export KBUILD_CHECKSRC KBUILD_SRC KBUILD_EXTMOD + +# Beautify output +# --------------------------------------------------------------------------- +# +# Normally, we echo the whole command before executing it. By making +# that echo $($(quiet)$(cmd)), we now have the possibility to set +# $(quiet) to choose other forms of output instead, e.g. +# +# quiet_cmd_cc_o_c = Compiling $(RELDIR)/$@ +# cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $< +# +# If $(quiet) is empty, the whole command will be printed. +# If it is set to "quiet_", only the short version will be printed. +# If it is set to "silent_", nothing will be printed at all, since +# the variable $(silent_cmd_cc_o_c) doesn't exist. +# +# A simple variant is to prefix commands with $(Q) - that's useful +# for commands that shall be hidden in non-verbose mode. +# +# $(Q)ln $@ :< +# +# If KBUILD_VERBOSE equals 0 then the above command will be hidden. +# If KBUILD_VERBOSE equals 1 then the above command is displayed. + +ifeq ($(KBUILD_VERBOSE),1) + quiet = + Q = +else + quiet=quiet_ + Q = @ +endif + +# If the user is running make -s (silent mode), suppress echoing of +# commands + +ifneq ($(filter s% -s%,$(MAKEFLAGS)),) + quiet=silent_ +endif + +export quiet Q KBUILD_VERBOSE + + +# Look for make include files relative to root of kernel src +MAKEFLAGS += --include-dir=$(srctree) + +# We need some generic definitions (do not try to remake the file). +$(srctree)/scripts/Kbuild.include: ; +include $(srctree)/scripts/Kbuild.include + +# Make variables (CC, etc...) + +AS = $(CROSS_COMPILE)as +LD = $(CROSS_COMPILE)ld +CC = $(CROSS_COMPILE)gcc +CPP = $(CC) -E +AR = $(CROSS_COMPILE)ar +NM = $(CROSS_COMPILE)nm +STRIP = $(CROSS_COMPILE)strip +OBJCOPY = $(CROSS_COMPILE)objcopy +OBJDUMP = $(CROSS_COMPILE)objdump +AWK = awk +GENKSYMS = scripts/genksyms/genksyms +INSTALLKERNEL := installkernel +DEPMOD = /sbin/depmod +KALLSYMS = scripts/kallsyms +PERL = perl +CHECK = sparse + +CHECKFLAGS := -D__linux__ -Dlinux -D__STDC__ -Dunix -D__unix__ \ + -Wbitwise -Wno-return-void $(CF) +CFLAGS_MODULE = +AFLAGS_MODULE = +LDFLAGS_MODULE = +CFLAGS_KERNEL = +AFLAGS_KERNEL = +CFLAGS_GCOV = -fprofile-arcs -ftest-coverage + + +# Use LINUXINCLUDE when you must reference the include/ directory. +# Needed to be compatible with the O= option +LINUXINCLUDE := -I$(srctree)/arch/$(hdr-arch)/include \ + -Iarch/$(hdr-arch)/include/generated -Iinclude \ + $(if $(KBUILD_SRC), -I$(srctree)/include) \ + -include $(srctree)/include/linux/kconfig.h + +KBUILD_CPPFLAGS := -D__KERNEL__ + +KBUILD_CFLAGS := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \ + -fno-strict-aliasing -fno-common \ + -Werror-implicit-function-declaration \ + -Wno-format-security \ + -fno-delete-null-pointer-checks +KBUILD_AFLAGS_KERNEL := +KBUILD_CFLAGS_KERNEL := +KBUILD_AFLAGS := -D__ASSEMBLY__ +KBUILD_AFLAGS_MODULE := -DMODULE +KBUILD_CFLAGS_MODULE := -DMODULE +KBUILD_LDFLAGS_MODULE := -T $(srctree)/scripts/module-common.lds + +# Read KERNELRELEASE from include/config/kernel.release (if it exists) +KERNELRELEASE = $(shell cat include/config/kernel.release 2> /dev/null) +KERNELVERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(SUBLEVEL)))$(EXTRAVERSION) + +export VERSION PATCHLEVEL SUBLEVEL KERNELRELEASE KERNELVERSION +export ARCH SRCARCH CONFIG_SHELL HOSTCC HOSTCFLAGS CROSS_COMPILE AS LD CC +export CPP AR NM STRIP OBJCOPY OBJDUMP +export MAKE AWK GENKSYMS INSTALLKERNEL PERL UTS_MACHINE +export HOSTCXX HOSTCXXFLAGS LDFLAGS_MODULE CHECK CHECKFLAGS + +export KBUILD_CPPFLAGS NOSTDINC_FLAGS LINUXINCLUDE OBJCOPYFLAGS LDFLAGS +export KBUILD_CFLAGS CFLAGS_KERNEL CFLAGS_MODULE CFLAGS_GCOV +export KBUILD_AFLAGS AFLAGS_KERNEL AFLAGS_MODULE +export KBUILD_AFLAGS_MODULE KBUILD_CFLAGS_MODULE KBUILD_LDFLAGS_MODULE +export KBUILD_AFLAGS_KERNEL KBUILD_CFLAGS_KERNEL +export KBUILD_ARFLAGS + +# When compiling out-of-tree modules, put MODVERDIR in the module +# tree rather than in the kernel tree. The kernel tree might +# even be read-only. +export MODVERDIR := $(if $(KBUILD_EXTMOD),$(firstword $(KBUILD_EXTMOD))/).tmp_versions + +# Files to ignore in find ... statements + +RCS_FIND_IGNORE := \( -name SCCS -o -name BitKeeper -o -name .svn -o -name CVS -o -name .pc -o -name .hg -o -name .git \) -prune -o +export RCS_TAR_IGNORE := --exclude SCCS --exclude BitKeeper --exclude .svn --exclude CVS --exclude .pc --exclude .hg --exclude .git + +# =========================================================================== +# Rules shared between *config targets and build targets + +# Basic helpers built in scripts/ +PHONY += scripts_basic +scripts_basic: + $(Q)$(MAKE) $(build)=scripts/basic + $(Q)rm -f .tmp_quiet_recordmcount + +# To avoid any implicit rule to kick in, define an empty command. +scripts/basic/%: scripts_basic ; + +PHONY += outputmakefile +# outputmakefile generates a Makefile in the output directory, if using a +# separate output directory. This allows convenient use of make in the +# output directory. +outputmakefile: +ifneq ($(KBUILD_SRC),) + $(Q)ln -fsn $(srctree) source + $(Q)$(CONFIG_SHELL) $(srctree)/scripts/mkmakefile \ + $(srctree) $(objtree) $(VERSION) $(PATCHLEVEL) +endif + +# Support for using generic headers in asm-generic +PHONY += asm-generic +asm-generic: + $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.asm-generic \ + obj=arch/$(SRCARCH)/include/generated/asm + +# To make sure we do not include .config for any of the *config targets +# catch them early, and hand them over to scripts/kconfig/Makefile +# It is allowed to specify more targets when calling make, including +# mixing *config targets and build targets. +# For example 'make oldconfig all'. +# Detect when mixed targets is specified, and make a second invocation +# of make so .config is not included in this case either (for *config). + +no-dot-config-targets := clean mrproper distclean \ + cscope gtags TAGS tags help %docs check% coccicheck \ + include/linux/version.h headers_% archheaders archscripts \ + kernelversion %src-pkg + +config-targets := 0 +mixed-targets := 0 +dot-config := 1 + +ifneq ($(filter $(no-dot-config-targets), $(MAKECMDGOALS)),) + ifeq ($(filter-out $(no-dot-config-targets), $(MAKECMDGOALS)),) + dot-config := 0 + endif +endif + +ifeq ($(KBUILD_EXTMOD),) + ifneq ($(filter config %config,$(MAKECMDGOALS)),) + config-targets := 1 + ifneq ($(filter-out config %config,$(MAKECMDGOALS)),) + mixed-targets := 1 + endif + endif +endif + +ifeq ($(mixed-targets),1) +# =========================================================================== +# We're called with mixed targets (*config and build targets). +# Handle them one by one. + +%:: FORCE + $(Q)$(MAKE) -C $(srctree) KBUILD_SRC= $@ + +else +ifeq ($(config-targets),1) +# =========================================================================== +# *config targets only - make sure prerequisites are updated, and descend +# in scripts/kconfig to make the *config target + +# Read arch specific Makefile to set KBUILD_DEFCONFIG as needed. +# KBUILD_DEFCONFIG may point out an alternative default configuration +# used for 'make defconfig' +include $(srctree)/arch/$(SRCARCH)/Makefile +export KBUILD_DEFCONFIG KBUILD_KCONFIG + +config: scripts_basic outputmakefile FORCE + $(Q)mkdir -p include/linux include/config + $(Q)$(MAKE) $(build)=scripts/kconfig $@ + +%config: scripts_basic outputmakefile FORCE + $(Q)mkdir -p include/linux include/config + $(Q)$(MAKE) $(build)=scripts/kconfig $@ + +else +# =========================================================================== +# Build targets only - this includes vmlinux, arch specific targets, clean +# targets and others. In general all targets except *config targets. + +ifeq ($(KBUILD_EXTMOD),) +# Additional helpers built in scripts/ +# Carefully list dependencies so we do not try to build scripts twice +# in parallel +PHONY += scripts +scripts: scripts_basic include/config/auto.conf include/config/tristate.conf + $(Q)$(MAKE) $(build)=$(@) + +# Objects we will link into vmlinux / subdirs we need to visit +init-y := init/ +drivers-y := drivers/ sound/ firmware/ +net-y := net/ +libs-y := lib/ +core-y := usr/ +endif # KBUILD_EXTMOD + +ifeq ($(dot-config),1) +# Read in config +-include include/config/auto.conf + +ifeq ($(KBUILD_EXTMOD),) +# Read in dependencies to all Kconfig* files, make sure to run +# oldconfig if changes are detected. +-include include/config/auto.conf.cmd + +# To avoid any implicit rule to kick in, define an empty command +$(KCONFIG_CONFIG) include/config/auto.conf.cmd: ; + +# If .config is newer than include/config/auto.conf, someone tinkered +# with it and forgot to run make oldconfig. +# if auto.conf.cmd is missing then we are probably in a cleaned tree so +# we execute the config step to be sure to catch updated Kconfig files +include/config/%.conf: $(KCONFIG_CONFIG) include/config/auto.conf.cmd + $(Q)$(MAKE) -f $(srctree)/Makefile silentoldconfig +else +# external modules needs include/generated/autoconf.h and include/config/auto.conf +# but do not care if they are up-to-date. Use auto.conf to trigger the test +PHONY += include/config/auto.conf + +include/config/auto.conf: + $(Q)test -e include/generated/autoconf.h -a -e $@ || ( \ + echo; \ + echo " ERROR: Kernel configuration is invalid."; \ + echo " include/generated/autoconf.h or $@ are missing.";\ + echo " Run 'make oldconfig && make prepare' on kernel src to fix it."; \ + echo; \ + /bin/false) + +endif # KBUILD_EXTMOD + +else +# Dummy target needed, because used as prerequisite +include/config/auto.conf: ; +endif # $(dot-config) + +# The all: target is the default when no target is given on the +# command line. +# This allow a user to issue only 'make' to build a kernel including modules +# Defaults to vmlinux, but the arch makefile usually adds further targets +all: vmlinux + +ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE +KBUILD_CFLAGS += -Os +else +KBUILD_CFLAGS += -O2 +endif + +include $(srctree)/arch/$(SRCARCH)/Makefile + +ifneq ($(CONFIG_FRAME_WARN),0) +KBUILD_CFLAGS += $(call cc-option,-Wframe-larger-than=${CONFIG_FRAME_WARN}) +endif + +# Force gcc to behave correct even for buggy distributions +ifndef CONFIG_CC_STACKPROTECTOR +KBUILD_CFLAGS += $(call cc-option, -fno-stack-protector) +endif + +# This warning generated too much noise in a regular build. +# Use make W=1 to enable this warning (see scripts/Makefile.build) +KBUILD_CFLAGS += $(call cc-disable-warning, unused-but-set-variable) + +ifdef CONFIG_FRAME_POINTER +KBUILD_CFLAGS += -fno-omit-frame-pointer -fno-optimize-sibling-calls +else +# Some targets (ARM with Thumb2, for example), can't be built with frame +# pointers. For those, we don't have FUNCTION_TRACER automatically +# select FRAME_POINTER. However, FUNCTION_TRACER adds -pg, and this is +# incompatible with -fomit-frame-pointer with current GCC, so we don't use +# -fomit-frame-pointer with FUNCTION_TRACER. +ifndef CONFIG_FUNCTION_TRACER +KBUILD_CFLAGS += -fomit-frame-pointer +endif +endif + +ifdef CONFIG_DEBUG_INFO +KBUILD_CFLAGS += -g +KBUILD_AFLAGS += -gdwarf-2 +endif + +ifdef CONFIG_DEBUG_INFO_REDUCED +KBUILD_CFLAGS += $(call cc-option, -femit-struct-debug-baseonly) +endif + +ifdef CONFIG_FUNCTION_TRACER +KBUILD_CFLAGS += -pg +ifdef CONFIG_DYNAMIC_FTRACE + ifdef CONFIG_HAVE_C_RECORDMCOUNT + BUILD_C_RECORDMCOUNT := y + export BUILD_C_RECORDMCOUNT + endif +endif +endif + +# We trigger additional mismatches with less inlining +ifdef CONFIG_DEBUG_SECTION_MISMATCH +KBUILD_CFLAGS += $(call cc-option, -fno-inline-functions-called-once) +endif + +# arch Makefile may override CC so keep this after arch Makefile is included +NOSTDINC_FLAGS += -nostdinc -isystem $(shell $(CC) -print-file-name=include) +CHECKFLAGS += $(NOSTDINC_FLAGS) + +# warn about C99 declaration after statement +KBUILD_CFLAGS += $(call cc-option,-Wdeclaration-after-statement,) + +# disable pointer signed / unsigned warnings in gcc 4.0 +KBUILD_CFLAGS += $(call cc-disable-warning, pointer-sign) + +# disable invalid "can't wrap" optimizations for signed / pointers +KBUILD_CFLAGS += $(call cc-option,-fno-strict-overflow) + +# conserve stack if available +KBUILD_CFLAGS += $(call cc-option,-fconserve-stack) + +# use the deterministic mode of AR if available +KBUILD_ARFLAGS := $(call ar-option,D) + +# check for 'asm goto' +ifeq ($(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-goto.sh $(CC)), y) + KBUILD_CFLAGS += -DCC_HAVE_ASM_GOTO +endif + +# Add user supplied CPPFLAGS, AFLAGS and CFLAGS as the last assignments +# But warn user when we do so +warn-assign = \ +$(warning "WARNING: Appending $$K$(1) ($(K$(1))) from $(origin K$(1)) to kernel $$$(1)") + +ifneq ($(KCPPFLAGS),) + $(call warn-assign,CPPFLAGS) + KBUILD_CPPFLAGS += $(KCPPFLAGS) +endif +ifneq ($(KAFLAGS),) + $(call warn-assign,AFLAGS) + KBUILD_AFLAGS += $(KAFLAGS) +endif +ifneq ($(KCFLAGS),) + $(call warn-assign,CFLAGS) + KBUILD_CFLAGS += $(KCFLAGS) +endif + +# Use --build-id when available. +LDFLAGS_BUILD_ID = $(patsubst -Wl$(comma)%,%,\ + $(call cc-ldoption, -Wl$(comma)--build-id,)) +KBUILD_LDFLAGS_MODULE += $(LDFLAGS_BUILD_ID) +LDFLAGS_vmlinux += $(LDFLAGS_BUILD_ID) + +ifeq ($(CONFIG_STRIP_ASM_SYMS),y) +LDFLAGS_vmlinux += $(call ld-option, -X,) +endif + +# Default kernel image to build when no specific target is given. +# KBUILD_IMAGE may be overruled on the command line or +# set in the environment +# Also any assignments in arch/$(ARCH)/Makefile take precedence over +# this default value +export KBUILD_IMAGE ?= vmlinux + +# +# INSTALL_PATH specifies where to place the updated kernel and system map +# images. Default is /boot, but you can set it to other values +export INSTALL_PATH ?= /boot + +# +# INSTALL_MOD_PATH specifies a prefix to MODLIB for module directory +# relocations required by build roots. This is not defined in the +# makefile but the argument can be passed to make if needed. +# + +MODLIB = $(INSTALL_MOD_PATH)/lib/modules/$(KERNELRELEASE) +export MODLIB + +# +# INSTALL_MOD_STRIP, if defined, will cause modules to be +# stripped after they are installed. If INSTALL_MOD_STRIP is '1', then +# the default option --strip-debug will be used. Otherwise, +# INSTALL_MOD_STRIP value will be used as the options to the strip command. + +ifdef INSTALL_MOD_STRIP +ifeq ($(INSTALL_MOD_STRIP),1) +mod_strip_cmd = $(STRIP) --strip-debug +else +mod_strip_cmd = $(STRIP) $(INSTALL_MOD_STRIP) +endif # INSTALL_MOD_STRIP=1 +else +mod_strip_cmd = true +endif # INSTALL_MOD_STRIP +export mod_strip_cmd + + +ifeq ($(KBUILD_EXTMOD),) +core-y += kernel/ mm/ fs/ ipc/ security/ crypto/ block/ + +vmlinux-dirs := $(patsubst %/,%,$(filter %/, $(init-y) $(init-m) \ + $(core-y) $(core-m) $(drivers-y) $(drivers-m) \ + $(net-y) $(net-m) $(libs-y) $(libs-m))) + +vmlinux-alldirs := $(sort $(vmlinux-dirs) $(patsubst %/,%,$(filter %/, \ + $(init-n) $(init-) \ + $(core-n) $(core-) $(drivers-n) $(drivers-) \ + $(net-n) $(net-) $(libs-n) $(libs-)))) + +init-y := $(patsubst %/, %/built-in.o, $(init-y)) +core-y := $(patsubst %/, %/built-in.o, $(core-y)) +drivers-y := $(patsubst %/, %/built-in.o, $(drivers-y)) +net-y := $(patsubst %/, %/built-in.o, $(net-y)) +libs-y1 := $(patsubst %/, %/lib.a, $(libs-y)) +libs-y2 := $(patsubst %/, %/built-in.o, $(libs-y)) +libs-y := $(libs-y1) $(libs-y2) + +# Build vmlinux +# --------------------------------------------------------------------------- +# vmlinux is built from the objects selected by $(vmlinux-init) and +# $(vmlinux-main). Most are built-in.o files from top-level directories +# in the kernel tree, others are specified in arch/$(ARCH)/Makefile. +# Ordering when linking is important, and $(vmlinux-init) must be first. +# +# vmlinux +# ^ +# | +# +-< $(vmlinux-init) +# | +--< init/version.o + more +# | +# +--< $(vmlinux-main) +# | +--< driver/built-in.o mm/built-in.o + more +# | +# +-< kallsyms.o (see description in CONFIG_KALLSYMS section) +# +# vmlinux version (uname -v) cannot be updated during normal +# descending-into-subdirs phase since we do not yet know if we need to +# update vmlinux. +# Therefore this step is delayed until just before final link of vmlinux - +# except in the kallsyms case where it is done just before adding the +# symbols to the kernel. +# +# System.map is generated to document addresses of all kernel symbols + +vmlinux-init := $(head-y) $(init-y) +vmlinux-main := $(core-y) $(libs-y) $(drivers-y) $(net-y) +vmlinux-all := $(vmlinux-init) $(vmlinux-main) +vmlinux-lds := arch/$(SRCARCH)/kernel/vmlinux.lds +export KBUILD_VMLINUX_OBJS := $(vmlinux-all) + +# Rule to link vmlinux - also used during CONFIG_KALLSYMS +# May be overridden by arch/$(ARCH)/Makefile +quiet_cmd_vmlinux__ ?= LD $@ + cmd_vmlinux__ ?= $(LD) $(LDFLAGS) $(LDFLAGS_vmlinux) -o $@ \ + -T $(vmlinux-lds) $(vmlinux-init) \ + --start-group $(vmlinux-main) --end-group \ + $(filter-out $(vmlinux-lds) $(vmlinux-init) $(vmlinux-main) vmlinux.o FORCE ,$^) + +# Generate new vmlinux version +quiet_cmd_vmlinux_version = GEN .version + cmd_vmlinux_version = set -e; \ + if [ ! -r .version ]; then \ + rm -f .version; \ + echo 1 >.version; \ + else \ + mv .version .old_version; \ + expr 0$$(cat .old_version) + 1 >.version; \ + fi; \ + $(MAKE) $(build)=init + +# Generate System.map +quiet_cmd_sysmap = SYSMAP + cmd_sysmap = $(CONFIG_SHELL) $(srctree)/scripts/mksysmap + +# Link of vmlinux +# If CONFIG_KALLSYMS is set .version is already updated +# Generate System.map and verify that the content is consistent +# Use + in front of the vmlinux_version rule to silent warning with make -j2 +# First command is ':' to allow us to use + in front of the rule +define rule_vmlinux__ + : + $(if $(CONFIG_KALLSYMS),,+$(call cmd,vmlinux_version)) + + $(call cmd,vmlinux__) + $(Q)echo 'cmd_$@ := $(cmd_vmlinux__)' > $(@D)/.$(@F).cmd + + $(Q)$(if $($(quiet)cmd_sysmap), \ + echo ' $($(quiet)cmd_sysmap) System.map' &&) \ + $(cmd_sysmap) $@ System.map; \ + if [ $$? -ne 0 ]; then \ + rm -f $@; \ + /bin/false; \ + fi; + $(verify_kallsyms) +endef + + +ifdef CONFIG_KALLSYMS +# Generate section listing all symbols and add it into vmlinux $(kallsyms.o) +# It's a three stage process: +# o .tmp_vmlinux1 has all symbols and sections, but __kallsyms is +# empty +# Running kallsyms on that gives us .tmp_kallsyms1.o with +# the right size - vmlinux version (uname -v) is updated during this step +# o .tmp_vmlinux2 now has a __kallsyms section of the right size, +# but due to the added section, some addresses have shifted. +# From here, we generate a correct .tmp_kallsyms2.o +# o The correct .tmp_kallsyms2.o is linked into the final vmlinux. +# o Verify that the System.map from vmlinux matches the map from +# .tmp_vmlinux2, just in case we did not generate kallsyms correctly. +# o If 'make KALLSYMS_EXTRA_PASS=1" was used, do an extra pass using +# .tmp_vmlinux3 and .tmp_kallsyms3.o. This is only meant as a +# temporary bypass to allow the kernel to be built while the +# maintainers work out what went wrong with kallsyms. + +last_kallsyms := 2 + +ifdef KALLSYMS_EXTRA_PASS +ifneq ($(KALLSYMS_EXTRA_PASS),0) +last_kallsyms := 3 +endif +endif + +kallsyms.o := .tmp_kallsyms$(last_kallsyms).o + +define verify_kallsyms + $(Q)$(if $($(quiet)cmd_sysmap), \ + echo ' $($(quiet)cmd_sysmap) .tmp_System.map' &&) \ + $(cmd_sysmap) .tmp_vmlinux$(last_kallsyms) .tmp_System.map + $(Q)cmp -s System.map .tmp_System.map || \ + (echo Inconsistent kallsyms data; \ + echo This is a bug - please report about it; \ + echo Try "make KALLSYMS_EXTRA_PASS=1" as a workaround; \ + rm .tmp_kallsyms* ; /bin/false ) +endef + +# Update vmlinux version before link +# Use + in front of this rule to silent warning about make -j1 +# First command is ':' to allow us to use + in front of this rule +cmd_ksym_ld = $(cmd_vmlinux__) +define rule_ksym_ld + : + +$(call cmd,vmlinux_version) + $(call cmd,vmlinux__) + $(Q)echo 'cmd_$@ := $(cmd_vmlinux__)' > $(@D)/.$(@F).cmd +endef + +# Generate .S file with all kernel symbols +quiet_cmd_kallsyms = KSYM $@ + cmd_kallsyms = $(NM) -n $< | $(KALLSYMS) \ + $(if $(CONFIG_KALLSYMS_ALL),--all-symbols) > $@ + +.tmp_kallsyms1.o .tmp_kallsyms2.o .tmp_kallsyms3.o: %.o: %.S scripts FORCE + $(call if_changed_dep,as_o_S) + +.tmp_kallsyms%.S: .tmp_vmlinux% $(KALLSYMS) + $(call cmd,kallsyms) + +# .tmp_vmlinux1 must be complete except kallsyms, so update vmlinux version +.tmp_vmlinux1: $(vmlinux-lds) $(vmlinux-all) FORCE + $(call if_changed_rule,ksym_ld) + +.tmp_vmlinux2: $(vmlinux-lds) $(vmlinux-all) .tmp_kallsyms1.o FORCE + $(call if_changed,vmlinux__) + +.tmp_vmlinux3: $(vmlinux-lds) $(vmlinux-all) .tmp_kallsyms2.o FORCE + $(call if_changed,vmlinux__) + +# Needs to visit scripts/ before $(KALLSYMS) can be used. +$(KALLSYMS): scripts ; + +# Generate some data for debugging strange kallsyms problems +debug_kallsyms: .tmp_map$(last_kallsyms) + +.tmp_map%: .tmp_vmlinux% FORCE + ($(OBJDUMP) -h $< | $(AWK) '/^ +[0-9]/{print $$4 " 0 " $$2}'; $(NM) $<) | sort > $@ + +.tmp_map3: .tmp_map2 + +.tmp_map2: .tmp_map1 + +endif # ifdef CONFIG_KALLSYMS + +# Do modpost on a prelinked vmlinux. The finally linked vmlinux has +# relevant sections renamed as per the linker script. +quiet_cmd_vmlinux-modpost = LD $@ + cmd_vmlinux-modpost = $(LD) $(LDFLAGS) -r -o $@ \ + $(vmlinux-init) --start-group $(vmlinux-main) --end-group \ + $(filter-out $(vmlinux-init) $(vmlinux-main) FORCE ,$^) +define rule_vmlinux-modpost + : + +$(call cmd,vmlinux-modpost) + $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost $@ + $(Q)echo 'cmd_$@ := $(cmd_vmlinux-modpost)' > $(dot-target).cmd +endef + +# vmlinux image - including updated kernel symbols +vmlinux: $(vmlinux-lds) $(vmlinux-init) $(vmlinux-main) vmlinux.o $(kallsyms.o) FORCE +ifdef CONFIG_HEADERS_CHECK + $(Q)$(MAKE) -f $(srctree)/Makefile headers_check +endif +ifdef CONFIG_SAMPLES + $(Q)$(MAKE) $(build)=samples +endif +ifdef CONFIG_BUILD_DOCSRC + $(Q)$(MAKE) $(build)=Documentation +endif + $(call vmlinux-modpost) + $(call if_changed_rule,vmlinux__) + $(Q)rm -f .old_version + +# build vmlinux.o first to catch section mismatch errors early +ifdef CONFIG_KALLSYMS +.tmp_vmlinux1: vmlinux.o +endif + +modpost-init := $(filter-out init/built-in.o, $(vmlinux-init)) +vmlinux.o: $(modpost-init) $(vmlinux-main) FORCE + $(call if_changed_rule,vmlinux-modpost) + +# The actual objects are generated when descending, +# make sure no implicit rule kicks in +$(sort $(vmlinux-init) $(vmlinux-main)) $(vmlinux-lds): $(vmlinux-dirs) ; + +# Handle descending into subdirectories listed in $(vmlinux-dirs) +# Preset locale variables to speed up the build process. Limit locale +# tweaks to this spot to avoid wrong language settings when running +# make menuconfig etc. +# Error messages still appears in the original language + +PHONY += $(vmlinux-dirs) +$(vmlinux-dirs): prepare scripts + $(Q)$(MAKE) $(build)=$@ + +# Store (new) KERNELRELASE string in include/config/kernel.release +include/config/kernel.release: include/config/auto.conf FORCE + $(Q)rm -f $@ + $(Q)echo "$(KERNELVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))" > $@ + + +# Things we need to do before we recursively start building the kernel +# or the modules are listed in "prepare". +# A multi level approach is used. prepareN is processed before prepareN-1. +# archprepare is used in arch Makefiles and when processed asm symlink, +# version.h and scripts_basic is processed / created. + +# Listed in dependency order +PHONY += prepare archprepare prepare0 prepare1 prepare2 prepare3 + +# prepare3 is used to check if we are building in a separate output directory, +# and if so do: +# 1) Check that make has not been executed in the kernel src $(srctree) +prepare3: include/config/kernel.release +ifneq ($(KBUILD_SRC),) + @$(kecho) ' Using $(srctree) as source for kernel' + $(Q)if [ -f $(srctree)/.config -o -d $(srctree)/include/config ]; then \ + echo " $(srctree) is not clean, please run 'make mrproper'";\ + echo " in the '$(srctree)' directory.";\ + /bin/false; \ + fi; +endif + +# prepare2 creates a makefile if using a separate output directory +prepare2: prepare3 outputmakefile asm-generic + +prepare1: prepare2 include/linux/version.h include/generated/utsrelease.h \ + include/config/auto.conf + $(cmd_crmodverdir) + +archprepare: archheaders archscripts prepare1 scripts_basic + +prepare0: archprepare FORCE + $(Q)$(MAKE) $(build)=. + +# All the preparing.. +prepare: prepare0 + +# Generate some files +# --------------------------------------------------------------------------- + +# KERNELRELEASE can change from a few different places, meaning version.h +# needs to be updated, so this check is forced on all builds + +uts_len := 64 +define filechk_utsrelease.h + if [ `echo -n "$(KERNELRELEASE)" | wc -c ` -gt $(uts_len) ]; then \ + echo '"$(KERNELRELEASE)" exceeds $(uts_len) characters' >&2; \ + exit 1; \ + fi; \ + (echo \#define UTS_RELEASE \"$(KERNELRELEASE)\";) +endef + +define filechk_version.h + (echo \#define LINUX_VERSION_CODE $(shell \ + expr $(VERSION) \* 65536 + 0$(PATCHLEVEL) \* 256 + 0$(SUBLEVEL)); \ + echo '#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + (c))';) +endef + +include/linux/version.h: $(srctree)/Makefile FORCE + $(call filechk,version.h) + +include/generated/utsrelease.h: include/config/kernel.release FORCE + $(call filechk,utsrelease.h) + +PHONY += headerdep +headerdep: + $(Q)find $(srctree)/include/ -name '*.h' | xargs --max-args 1 \ + $(srctree)/scripts/headerdep.pl -I$(srctree)/include + +# --------------------------------------------------------------------------- + +PHONY += depend dep +depend dep: + @echo '*** Warning: make $@ is unnecessary now.' + +# --------------------------------------------------------------------------- +# Firmware install +INSTALL_FW_PATH=$(INSTALL_MOD_PATH)/lib/firmware +export INSTALL_FW_PATH + +PHONY += firmware_install +firmware_install: FORCE + @mkdir -p $(objtree)/firmware + $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.fwinst obj=firmware __fw_install + +# --------------------------------------------------------------------------- +# Kernel headers + +#Default location for installed headers +export INSTALL_HDR_PATH = $(objtree)/usr + +hdr-inst := -rR -f $(srctree)/scripts/Makefile.headersinst obj + +# If we do an all arch process set dst to asm-$(hdr-arch) +hdr-dst = $(if $(KBUILD_HEADERS), dst=include/asm-$(hdr-arch), dst=include/asm) + +PHONY += archheaders +archheaders: + +PHONY += archscripts +archscripts: + +PHONY += __headers +__headers: include/linux/version.h scripts_basic asm-generic archheaders archscripts FORCE + $(Q)$(MAKE) $(build)=scripts build_unifdef + +PHONY += headers_install_all +headers_install_all: + $(Q)$(CONFIG_SHELL) $(srctree)/scripts/headers.sh install + +PHONY += headers_install +headers_install: __headers + $(if $(wildcard $(srctree)/arch/$(hdr-arch)/include/asm/Kbuild),, \ + $(error Headers not exportable for the $(SRCARCH) architecture)) + $(Q)$(MAKE) $(hdr-inst)=include + $(Q)$(MAKE) $(hdr-inst)=arch/$(hdr-arch)/include/asm $(hdr-dst) + +PHONY += headers_check_all +headers_check_all: headers_install_all + $(Q)$(CONFIG_SHELL) $(srctree)/scripts/headers.sh check + +PHONY += headers_check +headers_check: headers_install + $(Q)$(MAKE) $(hdr-inst)=include HDRCHECK=1 + $(Q)$(MAKE) $(hdr-inst)=arch/$(hdr-arch)/include/asm $(hdr-dst) HDRCHECK=1 + +# --------------------------------------------------------------------------- +# Modules + +ifdef CONFIG_MODULES + +# By default, build modules as well + +all: modules + +# Build modules +# +# A module can be listed more than once in obj-m resulting in +# duplicate lines in modules.order files. Those are removed +# using awk while concatenating to the final file. + +PHONY += modules +modules: $(vmlinux-dirs) $(if $(KBUILD_BUILTIN),vmlinux) modules.builtin + $(Q)$(AWK) '!x[$$0]++' $(vmlinux-dirs:%=$(objtree)/%/modules.order) > $(objtree)/modules.order + @$(kecho) ' Building modules, stage 2.'; + $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost + $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.fwinst obj=firmware __fw_modbuild + +modules.builtin: $(vmlinux-dirs:%=%/modules.builtin) + $(Q)$(AWK) '!x[$$0]++' $^ > $(objtree)/modules.builtin + +%/modules.builtin: include/config/auto.conf + $(Q)$(MAKE) $(modbuiltin)=$* + + +# Target to prepare building external modules +PHONY += modules_prepare +modules_prepare: prepare scripts + +# Target to install modules +PHONY += modules_install +modules_install: _modinst_ _modinst_post + +PHONY += _modinst_ +_modinst_: + @rm -rf $(MODLIB)/kernel + @rm -f $(MODLIB)/source + @mkdir -p $(MODLIB)/kernel + @ln -s $(srctree) $(MODLIB)/source + @if [ ! $(objtree) -ef $(MODLIB)/build ]; then \ + rm -f $(MODLIB)/build ; \ + ln -s $(objtree) $(MODLIB)/build ; \ + fi + @cp -f $(objtree)/modules.order $(MODLIB)/ + @cp -f $(objtree)/modules.builtin $(MODLIB)/ + $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modinst + +# This depmod is only for convenience to give the initial +# boot a modules.dep even before / is mounted read-write. However the +# boot script depmod is the master version. +PHONY += _modinst_post +_modinst_post: _modinst_ + $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.fwinst obj=firmware __fw_modinst + $(call cmd,depmod) + +else # CONFIG_MODULES + +# Modules not configured +# --------------------------------------------------------------------------- + +modules modules_install: FORCE + @echo + @echo "The present kernel configuration has modules disabled." + @echo "Type 'make config' and enable loadable module support." + @echo "Then build a kernel with module support enabled." + @echo + @exit 1 + +endif # CONFIG_MODULES + +### +# Cleaning is done on three levels. +# make clean Delete most generated files +# Leave enough to build external modules +# make mrproper Delete the current configuration, and all generated files +# make distclean Remove editor backup files, patch leftover files and the like + +# Directories & files removed with 'make clean' +CLEAN_DIRS += $(MODVERDIR) +CLEAN_FILES += vmlinux System.map \ + .tmp_kallsyms* .tmp_version .tmp_vmlinux* .tmp_System.map + +# Directories & files removed with 'make mrproper' +MRPROPER_DIRS += include/config usr/include include/generated \ + arch/*/include/generated +MRPROPER_FILES += .config .config.old .version .old_version \ + include/linux/version.h \ + Module.symvers tags TAGS cscope* GPATH GTAGS GRTAGS GSYMS + +# clean - Delete most, but leave enough to build external modules +# +clean: rm-dirs := $(CLEAN_DIRS) +clean: rm-files := $(CLEAN_FILES) +clean-dirs := $(addprefix _clean_, . $(vmlinux-alldirs) Documentation samples) + +PHONY += $(clean-dirs) clean archclean +$(clean-dirs): + $(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@) + +clean: archclean + +# mrproper - Delete all generated files, including .config +# +mrproper: rm-dirs := $(wildcard $(MRPROPER_DIRS)) +mrproper: rm-files := $(wildcard $(MRPROPER_FILES)) +mrproper-dirs := $(addprefix _mrproper_,Documentation/DocBook scripts) + +PHONY += $(mrproper-dirs) mrproper archmrproper +$(mrproper-dirs): + $(Q)$(MAKE) $(clean)=$(patsubst _mrproper_%,%,$@) + +mrproper: clean archmrproper $(mrproper-dirs) + $(call cmd,rmdirs) + $(call cmd,rmfiles) + +# distclean +# +PHONY += distclean + +distclean: mrproper + @find $(srctree) $(RCS_FIND_IGNORE) \ + \( -name '*.orig' -o -name '*.rej' -o -name '*~' \ + -o -name '*.bak' -o -name '#*#' -o -name '.*.orig' \ + -o -name '.*.rej' \ + -o -name '*%' -o -name '.*.cmd' -o -name 'core' \) \ + -type f -print | xargs rm -f + + +# Packaging of the kernel to various formats +# --------------------------------------------------------------------------- +# rpm target kept for backward compatibility +package-dir := $(srctree)/scripts/package + +%src-pkg: FORCE + $(Q)$(MAKE) $(build)=$(package-dir) $@ +%pkg: include/config/kernel.release FORCE + $(Q)$(MAKE) $(build)=$(package-dir) $@ +rpm: include/config/kernel.release FORCE + $(Q)$(MAKE) $(build)=$(package-dir) $@ + + +# Brief documentation of the typical targets used +# --------------------------------------------------------------------------- + +boards := $(wildcard $(srctree)/arch/$(SRCARCH)/configs/*_defconfig) +boards := $(notdir $(boards)) +board-dirs := $(dir $(wildcard $(srctree)/arch/$(SRCARCH)/configs/*/*_defconfig)) +board-dirs := $(sort $(notdir $(board-dirs:/=))) + +help: + @echo 'Cleaning targets:' + @echo ' clean - Remove most generated files but keep the config and' + @echo ' enough build support to build external modules' + @echo ' mrproper - Remove all generated files + config + various backup files' + @echo ' distclean - mrproper + remove editor backup and patch files' + @echo '' + @echo 'Configuration targets:' + @$(MAKE) -f $(srctree)/scripts/kconfig/Makefile help + @echo '' + @echo 'Other generic targets:' + @echo ' all - Build all targets marked with [*]' + @echo '* vmlinux - Build the bare kernel' + @echo '* modules - Build all modules' + @echo ' modules_install - Install all modules to INSTALL_MOD_PATH (default: /)' + @echo ' firmware_install- Install all firmware to INSTALL_FW_PATH' + @echo ' (default: $$(INSTALL_MOD_PATH)/lib/firmware)' + @echo ' dir/ - Build all files in dir and below' + @echo ' dir/file.[oisS] - Build specified target only' + @echo ' dir/file.lst - Build specified mixed source/assembly target only' + @echo ' (requires a recent binutils and recent build (System.map))' + @echo ' dir/file.ko - Build module including final link' + @echo ' modules_prepare - Set up for building external modules' + @echo ' tags/TAGS - Generate tags file for editors' + @echo ' cscope - Generate cscope index' + @echo ' gtags - Generate GNU GLOBAL index' + @echo ' kernelrelease - Output the release version string' + @echo ' kernelversion - Output the version stored in Makefile' + @echo ' headers_install - Install sanitised kernel headers to INSTALL_HDR_PATH'; \ + echo ' (default: $(INSTALL_HDR_PATH))'; \ + echo '' + @echo 'Static analysers' + @echo ' checkstack - Generate a list of stack hogs' + @echo ' namespacecheck - Name space analysis on compiled kernel' + @echo ' versioncheck - Sanity check on version.h usage' + @echo ' includecheck - Check for duplicate included header files' + @echo ' export_report - List the usages of all exported symbols' + @echo ' headers_check - Sanity check on exported headers' + @echo ' headerdep - Detect inclusion cycles in headers' + @$(MAKE) -f $(srctree)/scripts/Makefile.help checker-help + @echo '' + @echo 'Kernel packaging:' + @$(MAKE) $(build)=$(package-dir) help + @echo '' + @echo 'Documentation targets:' + @$(MAKE) -f $(srctree)/Documentation/DocBook/Makefile dochelp + @echo '' + @echo 'Architecture specific targets ($(SRCARCH)):' + @$(if $(archhelp),$(archhelp),\ + echo ' No architecture specific help defined for $(SRCARCH)') + @echo '' + @$(if $(boards), \ + $(foreach b, $(boards), \ + printf " %-24s - Build for %s\\n" $(b) $(subst _defconfig,,$(b));) \ + echo '') + @$(if $(board-dirs), \ + $(foreach b, $(board-dirs), \ + printf " %-16s - Show %s-specific targets\\n" help-$(b) $(b);) \ + printf " %-16s - Show all of the above\\n" help-boards; \ + echo '') + + @echo ' make V=0|1 [targets] 0 => quiet build (default), 1 => verbose build' + @echo ' make V=2 [targets] 2 => give reason for rebuild of target' + @echo ' make O=dir [targets] Locate all output files in "dir", including .config' + @echo ' make C=1 [targets] Check all c source with $$CHECK (sparse by default)' + @echo ' make C=2 [targets] Force check of all c source with $$CHECK' + @echo ' make RECORDMCOUNT_WARN=1 [targets] Warn about ignored mcount sections' + @echo ' make W=n [targets] Enable extra gcc checks, n=1,2,3 where' + @echo ' 1: warnings which may be relevant and do not occur too often' + @echo ' 2: warnings which occur quite often but may still be relevant' + @echo ' 3: more obscure warnings, can most likely be ignored' + @echo ' Multiple levels can be combined with W=12 or W=123' + @echo '' + @echo 'Execute "make" or "make all" to build all targets marked with [*] ' + @echo 'For further info see the ./README file' + + +help-board-dirs := $(addprefix help-,$(board-dirs)) + +help-boards: $(help-board-dirs) + +boards-per-dir = $(notdir $(wildcard $(srctree)/arch/$(SRCARCH)/configs/$*/*_defconfig)) + +$(help-board-dirs): help-%: + @echo 'Architecture specific targets ($(SRCARCH) $*):' + @$(if $(boards-per-dir), \ + $(foreach b, $(boards-per-dir), \ + printf " %-24s - Build for %s\\n" $*/$(b) $(subst _defconfig,,$(b));) \ + echo '') + + +# Documentation targets +# --------------------------------------------------------------------------- +%docs: scripts_basic FORCE + $(Q)$(MAKE) $(build)=scripts build_docproc + $(Q)$(MAKE) $(build)=Documentation/DocBook $@ + +else # KBUILD_EXTMOD + +### +# External module support. +# When building external modules the kernel used as basis is considered +# read-only, and no consistency checks are made and the make +# system is not used on the basis kernel. If updates are required +# in the basis kernel ordinary make commands (without M=...) must +# be used. +# +# The following are the only valid targets when building external +# modules. +# make M=dir clean Delete all automatically generated files +# make M=dir modules Make all modules in specified dir +# make M=dir Same as 'make M=dir modules' +# make M=dir modules_install +# Install the modules built in the module directory +# Assumes install directory is already created + +# We are always building modules +KBUILD_MODULES := 1 +PHONY += crmodverdir +crmodverdir: + $(cmd_crmodverdir) + +PHONY += $(objtree)/Module.symvers +$(objtree)/Module.symvers: + @test -e $(objtree)/Module.symvers || ( \ + echo; \ + echo " WARNING: Symbol version dump $(objtree)/Module.symvers"; \ + echo " is missing; modules will have no dependencies and modversions."; \ + echo ) + +module-dirs := $(addprefix _module_,$(KBUILD_EXTMOD)) +PHONY += $(module-dirs) modules +$(module-dirs): crmodverdir $(objtree)/Module.symvers + $(Q)$(MAKE) $(build)=$(patsubst _module_%,%,$@) + +modules: $(module-dirs) + @$(kecho) ' Building modules, stage 2.'; + $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost + +PHONY += modules_install +modules_install: _emodinst_ _emodinst_post + +install-dir := $(if $(INSTALL_MOD_DIR),$(INSTALL_MOD_DIR),extra) +PHONY += _emodinst_ +_emodinst_: + $(Q)mkdir -p $(MODLIB)/$(install-dir) + $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modinst + +PHONY += _emodinst_post +_emodinst_post: _emodinst_ + $(call cmd,depmod) + +clean-dirs := $(addprefix _clean_,$(KBUILD_EXTMOD)) + +PHONY += $(clean-dirs) clean +$(clean-dirs): + $(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@) + +clean: rm-dirs := $(MODVERDIR) +clean: rm-files := $(KBUILD_EXTMOD)/Module.symvers + +help: + @echo ' Building external modules.' + @echo ' Syntax: make -C path/to/kernel/src M=$$PWD target' + @echo '' + @echo ' modules - default target, build the module(s)' + @echo ' modules_install - install the module' + @echo ' clean - remove generated files in module directory only' + @echo '' + +# Dummies... +PHONY += prepare scripts +prepare: ; +scripts: ; +endif # KBUILD_EXTMOD + +clean: $(clean-dirs) + $(call cmd,rmdirs) + $(call cmd,rmfiles) + @find $(if $(KBUILD_EXTMOD), $(KBUILD_EXTMOD), .) $(RCS_FIND_IGNORE) \ + \( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \ + -o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \ + -o -name '*.symtypes' -o -name 'modules.order' \ + -o -name modules.builtin -o -name '.tmp_*.o.*' \ + -o -name '*.gcno' \) -type f -print | xargs rm -f + +# Generate tags for editors +# --------------------------------------------------------------------------- +quiet_cmd_tags = GEN $@ + cmd_tags = $(CONFIG_SHELL) $(srctree)/scripts/tags.sh $@ + +tags TAGS cscope gtags: FORCE + $(call cmd,tags) + +# Scripts to check various things for consistency +# --------------------------------------------------------------------------- + +PHONY += includecheck versioncheck coccicheck namespacecheck export_report + +includecheck: + find $(srctree)/* $(RCS_FIND_IGNORE) \ + -name '*.[hcS]' -type f -print | sort \ + | xargs $(PERL) -w $(srctree)/scripts/checkincludes.pl + +versioncheck: + find $(srctree)/* $(RCS_FIND_IGNORE) \ + -name '*.[hcS]' -type f -print | sort \ + | xargs $(PERL) -w $(srctree)/scripts/checkversion.pl + +coccicheck: + $(Q)$(CONFIG_SHELL) $(srctree)/scripts/$@ + +namespacecheck: + $(PERL) $(srctree)/scripts/namespace.pl + +export_report: + $(PERL) $(srctree)/scripts/export_report.pl + +endif #ifeq ($(config-targets),1) +endif #ifeq ($(mixed-targets),1) + +PHONY += checkstack kernelrelease kernelversion + +# UML needs a little special treatment here. It wants to use the host +# toolchain, so needs $(SUBARCH) passed to checkstack.pl. Everyone +# else wants $(ARCH), including people doing cross-builds, which means +# that $(SUBARCH) doesn't work here. +ifeq ($(ARCH), um) +CHECKSTACK_ARCH := $(SUBARCH) +else +CHECKSTACK_ARCH := $(ARCH) +endif +checkstack: + $(OBJDUMP) -d vmlinux $$(find . -name '*.ko') | \ + $(PERL) $(src)/scripts/checkstack.pl $(CHECKSTACK_ARCH) + +kernelrelease: + @echo "$(KERNELVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))" + +kernelversion: + @echo $(KERNELVERSION) + +# Single targets +# --------------------------------------------------------------------------- +# Single targets are compatible with: +# - build with mixed source and output +# - build with separate output dir 'make O=...' +# - external modules +# +# target-dir => where to store outputfile +# build-dir => directory in kernel source tree to use + +ifeq ($(KBUILD_EXTMOD),) + build-dir = $(patsubst %/,%,$(dir $@)) + target-dir = $(dir $@) +else + zap-slash=$(filter-out .,$(patsubst %/,%,$(dir $@))) + build-dir = $(KBUILD_EXTMOD)$(if $(zap-slash),/$(zap-slash)) + target-dir = $(if $(KBUILD_EXTMOD),$(dir $<),$(dir $@)) +endif + +%.s: %.c prepare scripts FORCE + $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@) +%.i: %.c prepare scripts FORCE + $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@) +%.o: %.c prepare scripts FORCE + $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@) +%.lst: %.c prepare scripts FORCE + $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@) +%.s: %.S prepare scripts FORCE + $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@) +%.o: %.S prepare scripts FORCE + $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@) +%.symtypes: %.c prepare scripts FORCE + $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@) + +# Modules +/: prepare scripts FORCE + $(cmd_crmodverdir) + $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \ + $(build)=$(build-dir) +%/: prepare scripts FORCE + $(cmd_crmodverdir) + $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \ + $(build)=$(build-dir) +%.ko: prepare scripts FORCE + $(cmd_crmodverdir) + $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \ + $(build)=$(build-dir) $(@:.ko=.o) + $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost + +# FIXME Should go into a make.lib or something +# =========================================================================== + +quiet_cmd_rmdirs = $(if $(wildcard $(rm-dirs)),CLEAN $(wildcard $(rm-dirs))) + cmd_rmdirs = rm -rf $(rm-dirs) + +quiet_cmd_rmfiles = $(if $(wildcard $(rm-files)),CLEAN $(wildcard $(rm-files))) + cmd_rmfiles = rm -f $(rm-files) + +# Run depmod only if we have System.map and depmod is executable +quiet_cmd_depmod = DEPMOD $(KERNELRELEASE) + cmd_depmod = $(CONFIG_SHELL) $(srctree)/scripts/depmod.sh $(DEPMOD) \ + $(KERNELRELEASE) + +# Create temporary dir for module support files +# clean it up only when building all modules +cmd_crmodverdir = $(Q)mkdir -p $(MODVERDIR) \ + $(if $(KBUILD_MODULES),; rm -f $(MODVERDIR)/*) + +a_flags = -Wp,-MD,$(depfile) $(KBUILD_AFLAGS) $(AFLAGS_KERNEL) \ + $(KBUILD_AFLAGS_KERNEL) \ + $(NOSTDINC_FLAGS) $(LINUXINCLUDE) $(KBUILD_CPPFLAGS) \ + $(modkern_aflags) $(EXTRA_AFLAGS) $(AFLAGS_$(basetarget).o) + +quiet_cmd_as_o_S = AS $@ +cmd_as_o_S = $(CC) $(a_flags) -c -o $@ $< + +# read all saved command lines + +targets := $(wildcard $(sort $(targets))) +cmd_files := $(wildcard .*.cmd $(foreach f,$(targets),$(dir $(f)).$(notdir $(f)).cmd)) + +ifneq ($(cmd_files),) + $(cmd_files): ; # Do not try to update included dependency files + include $(cmd_files) +endif + +# Shorthand for $(Q)$(MAKE) -f scripts/Makefile.clean obj=dir +# Usage: +# $(Q)$(MAKE) $(clean)=dir +clean := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.clean obj + +endif # skip-makefile + +PHONY += FORCE +FORCE: + +# Declare the contents of the .PHONY variable as phony. We keep that +# information in a variable so we can use it in if_changed and friends. +.PHONY: $(PHONY) + +ubin: uImage + @cp -f arch/arm/boot/uImage uzImage.bin + @echo ' Image uzImage.bin is ready' -- cgit