From 871480933a1c28f8a9fed4c4d34d06c439a7a422 Mon Sep 17 00:00:00 2001 From: Srikant Patnaik Date: Sun, 11 Jan 2015 12:28:04 +0530 Subject: Moved, renamed, and deleted files The original directory structure was scattered and unorganized. Changes are basically to make it look like kernel structure. --- .../devicetree/bindings/mmc/ti-omap-hsmmc.txt | 33 ++++++++++++++++++++++ 1 file changed, 33 insertions(+) create mode 100644 Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt (limited to 'Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt') diff --git a/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt b/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt new file mode 100644 index 00000000..dbd4368a --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt @@ -0,0 +1,33 @@ +* TI Highspeed MMC host controller for OMAP + +The Highspeed MMC Host Controller on TI OMAP family +provides an interface for MMC, SD, and SDIO types of memory cards. + +Required properties: +- compatible: + Should be "ti,omap2-hsmmc", for OMAP2 controllers + Should be "ti,omap3-hsmmc", for OMAP3 controllers + Should be "ti,omap4-hsmmc", for OMAP4 controllers +- ti,hwmods: Must be "mmc", n is controller instance starting 1 +- reg : should contain hsmmc registers location and length + +Optional properties: +ti,dual-volt: boolean, supports dual voltage cards +-supply: phandle to the regulator device tree node +"supply-name" examples are "vmmc", "vmmc_aux" etc +ti,bus-width: Number of data lines, default assumed is 1 if the property is missing. +cd-gpios: GPIOs for card detection +wp-gpios: GPIOs for write protection +ti,non-removable: non-removable slot (like eMMC) +ti,needs-special-reset: Requires a special softreset sequence + +Example: + mmc1: mmc@0x4809c000 { + compatible = "ti,omap4-hsmmc"; + reg = <0x4809c000 0x400>; + ti,hwmods = "mmc1"; + ti,dual-volt; + ti,bus-width = <4>; + vmmc-supply = <&vmmc>; /* phandle to regulator node */ + ti,non-removable; + }; -- cgit