From 392e8802486cb573b916e746010e141a75f507e6 Mon Sep 17 00:00:00 2001 From: Kevin Date: Sat, 15 Nov 2014 09:58:27 +0800 Subject: init android origin source code --- ANDROID_3.4.5/include/media/tvp7002.h | 56 +++++++++++++++++++++++++++++++++++ 1 file changed, 56 insertions(+) create mode 100644 ANDROID_3.4.5/include/media/tvp7002.h (limited to 'ANDROID_3.4.5/include/media/tvp7002.h') diff --git a/ANDROID_3.4.5/include/media/tvp7002.h b/ANDROID_3.4.5/include/media/tvp7002.h new file mode 100644 index 00000000..ee435345 --- /dev/null +++ b/ANDROID_3.4.5/include/media/tvp7002.h @@ -0,0 +1,56 @@ +/* Texas Instruments Triple 8-/10-BIT 165-/110-MSPS Video and Graphics + * Digitizer with Horizontal PLL registers + * + * Copyright (C) 2009 Texas Instruments Inc + * Author: Santiago Nunez-Corrales + * + * This code is partially based upon the TVP5150 driver + * written by Mauro Carvalho Chehab (mchehab@infradead.org), + * the TVP514x driver written by Vaibhav Hiremath + * and the TVP7002 driver in the TI LSP 2.10.00.14 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#ifndef _TVP7002_H_ +#define _TVP7002_H_ + +/* Platform-dependent data + * + * clk_polarity: + * 0 -> data clocked out on rising edge of DATACLK signal + * 1 -> data clocked out on falling edge of DATACLK signal + * hs_polarity: + * 0 -> active low HSYNC output + * 1 -> active high HSYNC output + * sog_polarity: + * 0 -> normal operation + * 1 -> operation with polarity inverted + * vs_polarity: + * 0 -> active low VSYNC output + * 1 -> active high VSYNC output + * fid_polarity: + * 0 -> the field ID output is set to logic 1 for an odd + * field (field 1) and set to logic 0 for an even + * field (field 0). + * 1 -> operation with polarity inverted. + */ +struct tvp7002_config { + u8 clk_polarity; + u8 hs_polarity; + u8 vs_polarity; + u8 fid_polarity; + u8 sog_polarity; +}; +#endif -- cgit