From 871480933a1c28f8a9fed4c4d34d06c439a7a422 Mon Sep 17 00:00:00 2001
From: Srikant Patnaik
Date: Sun, 11 Jan 2015 12:28:04 +0530
Subject: Moved, renamed, and deleted files

The original directory structure was scattered and unorganized.
Changes are basically to make it look like kernel structure.
---
 ANDROID_3.4.5/drivers/power/abx500_chargalg.c | 1921 -------------------------
 1 file changed, 1921 deletions(-)
 delete mode 100644 ANDROID_3.4.5/drivers/power/abx500_chargalg.c

(limited to 'ANDROID_3.4.5/drivers/power/abx500_chargalg.c')

diff --git a/ANDROID_3.4.5/drivers/power/abx500_chargalg.c b/ANDROID_3.4.5/drivers/power/abx500_chargalg.c
deleted file mode 100644
index 804b88c7..00000000
--- a/ANDROID_3.4.5/drivers/power/abx500_chargalg.c
+++ /dev/null
@@ -1,1921 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2012
- *
- * Charging algorithm driver for abx500 variants
- *
- * License Terms: GNU General Public License v2
- * Authors:
- *	Johan Palsson <johan.palsson@stericsson.com>
- *	Karl Komierowski <karl.komierowski@stericsson.com>
- *	Arun R Murthy <arun.murthy@stericsson.com>
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/device.h>
-#include <linux/interrupt.h>
-#include <linux/delay.h>
-#include <linux/slab.h>
-#include <linux/platform_device.h>
-#include <linux/power_supply.h>
-#include <linux/completion.h>
-#include <linux/workqueue.h>
-#include <linux/kobject.h>
-#include <linux/mfd/abx500.h>
-#include <linux/mfd/abx500/ux500_chargalg.h>
-#include <linux/mfd/abx500/ab8500-bm.h>
-
-/* Watchdog kick interval */
-#define CHG_WD_INTERVAL			(6 * HZ)
-
-/* End-of-charge criteria counter */
-#define EOC_COND_CNT			10
-
-/* Recharge criteria counter */
-#define RCH_COND_CNT			3
-
-#define to_abx500_chargalg_device_info(x) container_of((x), \
-	struct abx500_chargalg, chargalg_psy);
-
-enum abx500_chargers {
-	NO_CHG,
-	AC_CHG,
-	USB_CHG,
-};
-
-struct abx500_chargalg_charger_info {
-	enum abx500_chargers conn_chg;
-	enum abx500_chargers prev_conn_chg;
-	enum abx500_chargers online_chg;
-	enum abx500_chargers prev_online_chg;
-	enum abx500_chargers charger_type;
-	bool usb_chg_ok;
-	bool ac_chg_ok;
-	int usb_volt;
-	int usb_curr;
-	int ac_volt;
-	int ac_curr;
-	int usb_vset;
-	int usb_iset;
-	int ac_vset;
-	int ac_iset;
-};
-
-struct abx500_chargalg_suspension_status {
-	bool suspended_change;
-	bool ac_suspended;
-	bool usb_suspended;
-};
-
-struct abx500_chargalg_battery_data {
-	int temp;
-	int volt;
-	int avg_curr;
-	int inst_curr;
-	int percent;
-};
-
-enum abx500_chargalg_states {
-	STATE_HANDHELD_INIT,
-	STATE_HANDHELD,
-	STATE_CHG_NOT_OK_INIT,
-	STATE_CHG_NOT_OK,
-	STATE_HW_TEMP_PROTECT_INIT,
-	STATE_HW_TEMP_PROTECT,
-	STATE_NORMAL_INIT,
-	STATE_NORMAL,
-	STATE_WAIT_FOR_RECHARGE_INIT,
-	STATE_WAIT_FOR_RECHARGE,
-	STATE_MAINTENANCE_A_INIT,
-	STATE_MAINTENANCE_A,
-	STATE_MAINTENANCE_B_INIT,
-	STATE_MAINTENANCE_B,
-	STATE_TEMP_UNDEROVER_INIT,
-	STATE_TEMP_UNDEROVER,
-	STATE_TEMP_LOWHIGH_INIT,
-	STATE_TEMP_LOWHIGH,
-	STATE_SUSPENDED_INIT,
-	STATE_SUSPENDED,
-	STATE_OVV_PROTECT_INIT,
-	STATE_OVV_PROTECT,
-	STATE_SAFETY_TIMER_EXPIRED_INIT,
-	STATE_SAFETY_TIMER_EXPIRED,
-	STATE_BATT_REMOVED_INIT,
-	STATE_BATT_REMOVED,
-	STATE_WD_EXPIRED_INIT,
-	STATE_WD_EXPIRED,
-};
-
-static const char *states[] = {
-	"HANDHELD_INIT",
-	"HANDHELD",
-	"CHG_NOT_OK_INIT",
-	"CHG_NOT_OK",
-	"HW_TEMP_PROTECT_INIT",
-	"HW_TEMP_PROTECT",
-	"NORMAL_INIT",
-	"NORMAL",
-	"WAIT_FOR_RECHARGE_INIT",
-	"WAIT_FOR_RECHARGE",
-	"MAINTENANCE_A_INIT",
-	"MAINTENANCE_A",
-	"MAINTENANCE_B_INIT",
-	"MAINTENANCE_B",
-	"TEMP_UNDEROVER_INIT",
-	"TEMP_UNDEROVER",
-	"TEMP_LOWHIGH_INIT",
-	"TEMP_LOWHIGH",
-	"SUSPENDED_INIT",
-	"SUSPENDED",
-	"OVV_PROTECT_INIT",
-	"OVV_PROTECT",
-	"SAFETY_TIMER_EXPIRED_INIT",
-	"SAFETY_TIMER_EXPIRED",
-	"BATT_REMOVED_INIT",
-	"BATT_REMOVED",
-	"WD_EXPIRED_INIT",
-	"WD_EXPIRED",
-};
-
-struct abx500_chargalg_events {
-	bool batt_unknown;
-	bool mainextchnotok;
-	bool batt_ovv;
-	bool batt_rem;
-	bool btemp_underover;
-	bool btemp_lowhigh;
-	bool main_thermal_prot;
-	bool usb_thermal_prot;
-	bool main_ovv;
-	bool vbus_ovv;
-	bool usbchargernotok;
-	bool safety_timer_expired;
-	bool maintenance_timer_expired;
-	bool ac_wd_expired;
-	bool usb_wd_expired;
-	bool ac_cv_active;
-	bool usb_cv_active;
-	bool vbus_collapsed;
-};
-
-/**
- * struct abx500_charge_curr_maximization - Charger maximization parameters
- * @original_iset:	the non optimized/maximised charger current
- * @current_iset:	the charging current used at this moment
- * @test_delta_i:	the delta between the current we want to charge and the
-			current that is really going into the battery
- * @condition_cnt:	number of iterations needed before a new charger current
-			is set
- * @max_current:	maximum charger current
- * @wait_cnt:		to avoid too fast current step down in case of charger
- *			voltage collapse, we insert this delay between step
- *			down
- * @level:		tells in how many steps the charging current has been
-			increased
- */
-struct abx500_charge_curr_maximization {
-	int original_iset;
-	int current_iset;
-	int test_delta_i;
-	int condition_cnt;
-	int max_current;
-	int wait_cnt;
-	u8 level;
-};
-
-enum maxim_ret {
-	MAXIM_RET_NOACTION,
-	MAXIM_RET_CHANGE,
-	MAXIM_RET_IBAT_TOO_HIGH,
-};
-
-/**
- * struct abx500_chargalg - abx500 Charging algorithm device information
- * @dev:		pointer to the structure device
- * @charge_status:	battery operating status
- * @eoc_cnt:		counter used to determine end-of_charge
- * @rch_cnt:		counter used to determine start of recharge
- * @maintenance_chg:	indicate if maintenance charge is active
- * @t_hyst_norm		temperature hysteresis when the temperature has been
- *			over or under normal limits
- * @t_hyst_lowhigh	temperature hysteresis when the temperature has been
- *			over or under the high or low limits
- * @charge_state:	current state of the charging algorithm
- * @ccm			charging current maximization parameters
- * @chg_info:		information about connected charger types
- * @batt_data:		data of the battery
- * @susp_status:	current charger suspension status
- * @pdata:		pointer to the abx500_chargalg platform data
- * @bat:		pointer to the abx500_bm platform data
- * @chargalg_psy:	structure that holds the battery properties exposed by
- *			the charging algorithm
- * @events:		structure for information about events triggered
- * @chargalg_wq:		work queue for running the charging algorithm
- * @chargalg_periodic_work:	work to run the charging algorithm periodically
- * @chargalg_wd_work:		work to kick the charger watchdog periodically
- * @chargalg_work:		work to run the charging algorithm instantly
- * @safety_timer:		charging safety timer
- * @maintenance_timer:		maintenance charging timer
- * @chargalg_kobject:		structure of type kobject
- */
-struct abx500_chargalg {
-	struct device *dev;
-	int charge_status;
-	int eoc_cnt;
-	int rch_cnt;
-	bool maintenance_chg;
-	int t_hyst_norm;
-	int t_hyst_lowhigh;
-	enum abx500_chargalg_states charge_state;
-	struct abx500_charge_curr_maximization ccm;
-	struct abx500_chargalg_charger_info chg_info;
-	struct abx500_chargalg_battery_data batt_data;
-	struct abx500_chargalg_suspension_status susp_status;
-	struct abx500_chargalg_platform_data *pdata;
-	struct abx500_bm_data *bat;
-	struct power_supply chargalg_psy;
-	struct ux500_charger *ac_chg;
-	struct ux500_charger *usb_chg;
-	struct abx500_chargalg_events events;
-	struct workqueue_struct *chargalg_wq;
-	struct delayed_work chargalg_periodic_work;
-	struct delayed_work chargalg_wd_work;
-	struct work_struct chargalg_work;
-	struct timer_list safety_timer;
-	struct timer_list maintenance_timer;
-	struct kobject chargalg_kobject;
-};
-
-/* Main battery properties */
-static enum power_supply_property abx500_chargalg_props[] = {
-	POWER_SUPPLY_PROP_STATUS,
-	POWER_SUPPLY_PROP_HEALTH,
-};
-
-/**
- * abx500_chargalg_safety_timer_expired() - Expiration of the safety timer
- * @data:	pointer to the abx500_chargalg structure
- *
- * This function gets called when the safety timer for the charger
- * expires
- */
-static void abx500_chargalg_safety_timer_expired(unsigned long data)
-{
-	struct abx500_chargalg *di = (struct abx500_chargalg *) data;
-	dev_err(di->dev, "Safety timer expired\n");
-	di->events.safety_timer_expired = true;
-
-	/* Trigger execution of the algorithm instantly */
-	queue_work(di->chargalg_wq, &di->chargalg_work);
-}
-
-/**
- * abx500_chargalg_maintenance_timer_expired() - Expiration of
- * the maintenance timer
- * @i:		pointer to the abx500_chargalg structure
- *
- * This function gets called when the maintenence timer
- * expires
- */
-static void abx500_chargalg_maintenance_timer_expired(unsigned long data)
-{
-
-	struct abx500_chargalg *di = (struct abx500_chargalg *) data;
-	dev_dbg(di->dev, "Maintenance timer expired\n");
-	di->events.maintenance_timer_expired = true;
-
-	/* Trigger execution of the algorithm instantly */
-	queue_work(di->chargalg_wq, &di->chargalg_work);
-}
-
-/**
- * abx500_chargalg_state_to() - Change charge state
- * @di:		pointer to the abx500_chargalg structure
- *
- * This function gets called when a charge state change should occur
- */
-static void abx500_chargalg_state_to(struct abx500_chargalg *di,
-	enum abx500_chargalg_states state)
-{
-	dev_dbg(di->dev,
-		"State changed: %s (From state: [%d] %s =to=> [%d] %s )\n",
-		di->charge_state == state ? "NO" : "YES",
-		di->charge_state,
-		states[di->charge_state],
-		state,
-		states[state]);
-
-	di->charge_state = state;
-}
-
-/**
- * abx500_chargalg_check_charger_connection() - Check charger connection change
- * @di:		pointer to the abx500_chargalg structure
- *
- * This function will check if there is a change in the charger connection
- * and change charge state accordingly. AC has precedence over USB.
- */
-static int abx500_chargalg_check_charger_connection(struct abx500_chargalg *di)
-{
-	if (di->chg_info.conn_chg != di->chg_info.prev_conn_chg ||
-		di->susp_status.suspended_change) {
-		/*
-		 * Charger state changed or suspension
-		 * has changed since last update
-		 */
-		if ((di->chg_info.conn_chg & AC_CHG) &&
-			!di->susp_status.ac_suspended) {
-			dev_dbg(di->dev, "Charging source is AC\n");
-			if (di->chg_info.charger_type != AC_CHG) {
-				di->chg_info.charger_type = AC_CHG;
-				abx500_chargalg_state_to(di, STATE_NORMAL_INIT);
-			}
-		} else if ((di->chg_info.conn_chg & USB_CHG) &&
-			!di->susp_status.usb_suspended) {
-			dev_dbg(di->dev, "Charging source is USB\n");
-			di->chg_info.charger_type = USB_CHG;
-			abx500_chargalg_state_to(di, STATE_NORMAL_INIT);
-		} else if (di->chg_info.conn_chg &&
-			(di->susp_status.ac_suspended ||
-			di->susp_status.usb_suspended)) {
-			dev_dbg(di->dev, "Charging is suspended\n");
-			di->chg_info.charger_type = NO_CHG;
-			abx500_chargalg_state_to(di, STATE_SUSPENDED_INIT);
-		} else {
-			dev_dbg(di->dev, "Charging source is OFF\n");
-			di->chg_info.charger_type = NO_CHG;
-			abx500_chargalg_state_to(di, STATE_HANDHELD_INIT);
-		}
-		di->chg_info.prev_conn_chg = di->chg_info.conn_chg;
-		di->susp_status.suspended_change = false;
-	}
-	return di->chg_info.conn_chg;
-}
-
-/**
- * abx500_chargalg_start_safety_timer() - Start charging safety timer
- * @di:		pointer to the abx500_chargalg structure
- *
- * The safety timer is used to avoid overcharging of old or bad batteries.
- * There are different timers for AC and USB
- */
-static void abx500_chargalg_start_safety_timer(struct abx500_chargalg *di)
-{
-	unsigned long timer_expiration = 0;
-
-	switch (di->chg_info.charger_type) {
-	case AC_CHG:
-		timer_expiration =
-		round_jiffies(jiffies +
-			(di->bat->main_safety_tmr_h * 3600 * HZ));
-		break;
-
-	case USB_CHG:
-		timer_expiration =
-		round_jiffies(jiffies +
-			(di->bat->usb_safety_tmr_h * 3600 * HZ));
-		break;
-
-	default:
-		dev_err(di->dev, "Unknown charger to charge from\n");
-		break;
-	}
-
-	di->events.safety_timer_expired = false;
-	di->safety_timer.expires = timer_expiration;
-	if (!timer_pending(&di->safety_timer))
-		add_timer(&di->safety_timer);
-	else
-		mod_timer(&di->safety_timer, timer_expiration);
-}
-
-/**
- * abx500_chargalg_stop_safety_timer() - Stop charging safety timer
- * @di:		pointer to the abx500_chargalg structure
- *
- * The safety timer is stopped whenever the NORMAL state is exited
- */
-static void abx500_chargalg_stop_safety_timer(struct abx500_chargalg *di)
-{
-	di->events.safety_timer_expired = false;
-	del_timer(&di->safety_timer);
-}
-
-/**
- * abx500_chargalg_start_maintenance_timer() - Start charging maintenance timer
- * @di:		pointer to the abx500_chargalg structure
- * @duration:	duration of ther maintenance timer in hours
- *
- * The maintenance timer is used to maintain the charge in the battery once
- * the battery is considered full. These timers are chosen to match the
- * discharge curve of the battery
- */
-static void abx500_chargalg_start_maintenance_timer(struct abx500_chargalg *di,
-	int duration)
-{
-	unsigned long timer_expiration;
-
-	/* Convert from hours to jiffies */
-	timer_expiration = round_jiffies(jiffies + (duration * 3600 * HZ));
-
-	di->events.maintenance_timer_expired = false;
-	di->maintenance_timer.expires = timer_expiration;
-	if (!timer_pending(&di->maintenance_timer))
-		add_timer(&di->maintenance_timer);
-	else
-		mod_timer(&di->maintenance_timer, timer_expiration);
-}
-
-/**
- * abx500_chargalg_stop_maintenance_timer() - Stop maintenance timer
- * @di:		pointer to the abx500_chargalg structure
- *
- * The maintenance timer is stopped whenever maintenance ends or when another
- * state is entered
- */
-static void abx500_chargalg_stop_maintenance_timer(struct abx500_chargalg *di)
-{
-	di->events.maintenance_timer_expired = false;
-	del_timer(&di->maintenance_timer);
-}
-
-/**
- * abx500_chargalg_kick_watchdog() - Kick charger watchdog
- * @di:		pointer to the abx500_chargalg structure
- *
- * The charger watchdog have to be kicked periodically whenever the charger is
- * on, else the ABB will reset the system
- */
-static int abx500_chargalg_kick_watchdog(struct abx500_chargalg *di)
-{
-	/* Check if charger exists and kick watchdog if charging */
-	if (di->ac_chg && di->ac_chg->ops.kick_wd &&
-			di->chg_info.online_chg & AC_CHG)
-		return di->ac_chg->ops.kick_wd(di->ac_chg);
-	else if (di->usb_chg && di->usb_chg->ops.kick_wd &&
-			di->chg_info.online_chg & USB_CHG)
-		return di->usb_chg->ops.kick_wd(di->usb_chg);
-
-	return -ENXIO;
-}
-
-/**
- * abx500_chargalg_ac_en() - Turn on/off the AC charger
- * @di:		pointer to the abx500_chargalg structure
- * @enable:	charger on/off
- * @vset:	requested charger output voltage
- * @iset:	requested charger output current
- *
- * The AC charger will be turned on/off with the requested charge voltage and
- * current
- */
-static int abx500_chargalg_ac_en(struct abx500_chargalg *di, int enable,
-	int vset, int iset)
-{
-	if (!di->ac_chg || !di->ac_chg->ops.enable)
-		return -ENXIO;
-
-	/* Select maximum of what both the charger and the battery supports */
-	if (di->ac_chg->max_out_volt)
-		vset = min(vset, di->ac_chg->max_out_volt);
-	if (di->ac_chg->max_out_curr)
-		iset = min(iset, di->ac_chg->max_out_curr);
-
-	di->chg_info.ac_iset = iset;
-	di->chg_info.ac_vset = vset;
-
-	return di->ac_chg->ops.enable(di->ac_chg, enable, vset, iset);
-}
-
-/**
- * abx500_chargalg_usb_en() - Turn on/off the USB charger
- * @di:		pointer to the abx500_chargalg structure
- * @enable:	charger on/off
- * @vset:	requested charger output voltage
- * @iset:	requested charger output current
- *
- * The USB charger will be turned on/off with the requested charge voltage and
- * current
- */
-static int abx500_chargalg_usb_en(struct abx500_chargalg *di, int enable,
-	int vset, int iset)
-{
-	if (!di->usb_chg || !di->usb_chg->ops.enable)
-		return -ENXIO;
-
-	/* Select maximum of what both the charger and the battery supports */
-	if (di->usb_chg->max_out_volt)
-		vset = min(vset, di->usb_chg->max_out_volt);
-	if (di->usb_chg->max_out_curr)
-		iset = min(iset, di->usb_chg->max_out_curr);
-
-	di->chg_info.usb_iset = iset;
-	di->chg_info.usb_vset = vset;
-
-	return di->usb_chg->ops.enable(di->usb_chg, enable, vset, iset);
-}
-
-/**
- * abx500_chargalg_update_chg_curr() - Update charger current
- * @di:		pointer to the abx500_chargalg structure
- * @iset:	requested charger output current
- *
- * The charger output current will be updated for the charger
- * that is currently in use
- */
-static int abx500_chargalg_update_chg_curr(struct abx500_chargalg *di,
-		int iset)
-{
-	/* Check if charger exists and update current if charging */
-	if (di->ac_chg && di->ac_chg->ops.update_curr &&
-			di->chg_info.charger_type & AC_CHG) {
-		/*
-		 * Select maximum of what both the charger
-		 * and the battery supports
-		 */
-		if (di->ac_chg->max_out_curr)
-			iset = min(iset, di->ac_chg->max_out_curr);
-
-		di->chg_info.ac_iset = iset;
-
-		return di->ac_chg->ops.update_curr(di->ac_chg, iset);
-	} else if (di->usb_chg && di->usb_chg->ops.update_curr &&
-			di->chg_info.charger_type & USB_CHG) {
-		/*
-		 * Select maximum of what both the charger
-		 * and the battery supports
-		 */
-		if (di->usb_chg->max_out_curr)
-			iset = min(iset, di->usb_chg->max_out_curr);
-
-		di->chg_info.usb_iset = iset;
-
-		return di->usb_chg->ops.update_curr(di->usb_chg, iset);
-	}
-
-	return -ENXIO;
-}
-
-/**
- * abx500_chargalg_stop_charging() - Stop charging
- * @di:		pointer to the abx500_chargalg structure
- *
- * This function is called from any state where charging should be stopped.
- * All charging is disabled and all status parameters and timers are changed
- * accordingly
- */
-static void abx500_chargalg_stop_charging(struct abx500_chargalg *di)
-{
-	abx500_chargalg_ac_en(di, false, 0, 0);
-	abx500_chargalg_usb_en(di, false, 0, 0);
-	abx500_chargalg_stop_safety_timer(di);
-	abx500_chargalg_stop_maintenance_timer(di);
-	di->charge_status = POWER_SUPPLY_STATUS_NOT_CHARGING;
-	di->maintenance_chg = false;
-	cancel_delayed_work(&di->chargalg_wd_work);
-	power_supply_changed(&di->chargalg_psy);
-}
-
-/**
- * abx500_chargalg_hold_charging() - Pauses charging
- * @di:		pointer to the abx500_chargalg structure
- *
- * This function is called in the case where maintenance charging has been
- * disabled and instead a battery voltage mode is entered to check when the
- * battery voltage has reached a certain recharge voltage
- */
-static void abx500_chargalg_hold_charging(struct abx500_chargalg *di)
-{
-	abx500_chargalg_ac_en(di, false, 0, 0);
-	abx500_chargalg_usb_en(di, false, 0, 0);
-	abx500_chargalg_stop_safety_timer(di);
-	abx500_chargalg_stop_maintenance_timer(di);
-	di->charge_status = POWER_SUPPLY_STATUS_CHARGING;
-	di->maintenance_chg = false;
-	cancel_delayed_work(&di->chargalg_wd_work);
-	power_supply_changed(&di->chargalg_psy);
-}
-
-/**
- * abx500_chargalg_start_charging() - Start the charger
- * @di:		pointer to the abx500_chargalg structure
- * @vset:	requested charger output voltage
- * @iset:	requested charger output current
- *
- * A charger will be enabled depending on the requested charger type that was
- * detected previously.
- */
-static void abx500_chargalg_start_charging(struct abx500_chargalg *di,
-	int vset, int iset)
-{
-	switch (di->chg_info.charger_type) {
-	case AC_CHG:
-		dev_dbg(di->dev,
-			"AC parameters: Vset %d, Ich %d\n", vset, iset);
-		abx500_chargalg_usb_en(di, false, 0, 0);
-		abx500_chargalg_ac_en(di, true, vset, iset);
-		break;
-
-	case USB_CHG:
-		dev_dbg(di->dev,
-			"USB parameters: Vset %d, Ich %d\n", vset, iset);
-		abx500_chargalg_ac_en(di, false, 0, 0);
-		abx500_chargalg_usb_en(di, true, vset, iset);
-		break;
-
-	default:
-		dev_err(di->dev, "Unknown charger to charge from\n");
-		break;
-	}
-}
-
-/**
- * abx500_chargalg_check_temp() - Check battery temperature ranges
- * @di:		pointer to the abx500_chargalg structure
- *
- * The battery temperature is checked against the predefined limits and the
- * charge state is changed accordingly
- */
-static void abx500_chargalg_check_temp(struct abx500_chargalg *di)
-{
-	if (di->batt_data.temp > (di->bat->temp_low + di->t_hyst_norm) &&
-		di->batt_data.temp < (di->bat->temp_high - di->t_hyst_norm)) {
-		/* Temp OK! */
-		di->events.btemp_underover = false;
-		di->events.btemp_lowhigh = false;
-		di->t_hyst_norm = 0;
-		di->t_hyst_lowhigh = 0;
-	} else {
-		if (((di->batt_data.temp >= di->bat->temp_high) &&
-			(di->batt_data.temp <
-				(di->bat->temp_over - di->t_hyst_lowhigh))) ||
-			((di->batt_data.temp >
-				(di->bat->temp_under + di->t_hyst_lowhigh)) &&
-			(di->batt_data.temp <= di->bat->temp_low))) {
-			/* TEMP minor!!!!! */
-			di->events.btemp_underover = false;
-			di->events.btemp_lowhigh = true;
-			di->t_hyst_norm = di->bat->temp_hysteresis;
-			di->t_hyst_lowhigh = 0;
-		} else if (di->batt_data.temp <= di->bat->temp_under ||
-			di->batt_data.temp >= di->bat->temp_over) {
-			/* TEMP major!!!!! */
-			di->events.btemp_underover = true;
-			di->events.btemp_lowhigh = false;
-			di->t_hyst_norm = 0;
-			di->t_hyst_lowhigh = di->bat->temp_hysteresis;
-		} else {
-		/* Within hysteresis */
-		dev_dbg(di->dev, "Within hysteresis limit temp: %d "
-				"hyst_lowhigh %d, hyst normal %d\n",
-				di->batt_data.temp, di->t_hyst_lowhigh,
-				di->t_hyst_norm);
-		}
-	}
-}
-
-/**
- * abx500_chargalg_check_charger_voltage() - Check charger voltage
- * @di:		pointer to the abx500_chargalg structure
- *
- * Charger voltage is checked against maximum limit
- */
-static void abx500_chargalg_check_charger_voltage(struct abx500_chargalg *di)
-{
-	if (di->chg_info.usb_volt > di->bat->chg_params->usb_volt_max)
-		di->chg_info.usb_chg_ok = false;
-	else
-		di->chg_info.usb_chg_ok = true;
-
-	if (di->chg_info.ac_volt > di->bat->chg_params->ac_volt_max)
-		di->chg_info.ac_chg_ok = false;
-	else
-		di->chg_info.ac_chg_ok = true;
-
-}
-
-/**
- * abx500_chargalg_end_of_charge() - Check if end-of-charge criteria is fulfilled
- * @di:		pointer to the abx500_chargalg structure
- *
- * End-of-charge criteria is fulfilled when the battery voltage is above a
- * certain limit and the battery current is below a certain limit for a
- * predefined number of consecutive seconds. If true, the battery is full
- */
-static void abx500_chargalg_end_of_charge(struct abx500_chargalg *di)
-{
-	if (di->charge_status == POWER_SUPPLY_STATUS_CHARGING &&
-		di->charge_state == STATE_NORMAL &&
-		!di->maintenance_chg && (di->batt_data.volt >=
-		di->bat->bat_type[di->bat->batt_id].termination_vol ||
-		di->events.usb_cv_active || di->events.ac_cv_active) &&
-		di->batt_data.avg_curr <
-		di->bat->bat_type[di->bat->batt_id].termination_curr &&
-		di->batt_data.avg_curr > 0) {
-		if (++di->eoc_cnt >= EOC_COND_CNT) {
-			di->eoc_cnt = 0;
-			di->charge_status = POWER_SUPPLY_STATUS_FULL;
-			di->maintenance_chg = true;
-			dev_dbg(di->dev, "EOC reached!\n");
-			power_supply_changed(&di->chargalg_psy);
-		} else {
-			dev_dbg(di->dev,
-				" EOC limit reached for the %d"
-				" time, out of %d before EOC\n",
-				di->eoc_cnt,
-				EOC_COND_CNT);
-		}
-	} else {
-		di->eoc_cnt = 0;
-	}
-}
-
-static void init_maxim_chg_curr(struct abx500_chargalg *di)
-{
-	di->ccm.original_iset =
-		di->bat->bat_type[di->bat->batt_id].normal_cur_lvl;
-	di->ccm.current_iset =
-		di->bat->bat_type[di->bat->batt_id].normal_cur_lvl;
-	di->ccm.test_delta_i = di->bat->maxi->charger_curr_step;
-	di->ccm.max_current = di->bat->maxi->chg_curr;
-	di->ccm.condition_cnt = di->bat->maxi->wait_cycles;
-	di->ccm.level = 0;
-}
-
-/**
- * abx500_chargalg_chg_curr_maxim - increases the charger current to
- *			compensate for the system load
- * @di		pointer to the abx500_chargalg structure
- *
- * This maximization function is used to raise the charger current to get the
- * battery current as close to the optimal value as possible. The battery
- * current during charging is affected by the system load
- */
-static enum maxim_ret abx500_chargalg_chg_curr_maxim(struct abx500_chargalg *di)
-{
-	int delta_i;
-
-	if (!di->bat->maxi->ena_maxi)
-		return MAXIM_RET_NOACTION;
-
-	delta_i = di->ccm.original_iset - di->batt_data.inst_curr;
-
-	if (di->events.vbus_collapsed) {
-		dev_dbg(di->dev, "Charger voltage has collapsed %d\n",
-				di->ccm.wait_cnt);
-		if (di->ccm.wait_cnt == 0) {
-			dev_dbg(di->dev, "lowering current\n");
-			di->ccm.wait_cnt++;
-			di->ccm.condition_cnt = di->bat->maxi->wait_cycles;
-			di->ccm.max_current =
-				di->ccm.current_iset - di->ccm.test_delta_i;
-			di->ccm.current_iset = di->ccm.max_current;
-			di->ccm.level--;
-			return MAXIM_RET_CHANGE;
-		} else {
-			dev_dbg(di->dev, "waiting\n");
-			/* Let's go in here twice before lowering curr again */
-			di->ccm.wait_cnt = (di->ccm.wait_cnt + 1) % 3;
-			return MAXIM_RET_NOACTION;
-		}
-	}
-
-	di->ccm.wait_cnt = 0;
-
-	if ((di->batt_data.inst_curr > di->ccm.original_iset)) {
-		dev_dbg(di->dev, " Maximization Ibat (%dmA) too high"
-			" (limit %dmA) (current iset: %dmA)!\n",
-			di->batt_data.inst_curr, di->ccm.original_iset,
-			di->ccm.current_iset);
-
-		if (di->ccm.current_iset == di->ccm.original_iset)
-			return MAXIM_RET_NOACTION;
-
-		di->ccm.condition_cnt = di->bat->maxi->wait_cycles;
-		di->ccm.current_iset = di->ccm.original_iset;
-		di->ccm.level = 0;
-
-		return MAXIM_RET_IBAT_TOO_HIGH;
-	}
-
-	if (delta_i > di->ccm.test_delta_i &&
-		(di->ccm.current_iset + di->ccm.test_delta_i) <
-		di->ccm.max_current) {
-		if (di->ccm.condition_cnt-- == 0) {
-			/* Increse the iset with cco.test_delta_i */
-			di->ccm.condition_cnt = di->bat->maxi->wait_cycles;
-			di->ccm.current_iset += di->ccm.test_delta_i;
-			di->ccm.level++;
-			dev_dbg(di->dev, " Maximization needed, increase"
-				" with %d mA to %dmA (Optimal ibat: %d)"
-				" Level %d\n",
-				di->ccm.test_delta_i,
-				di->ccm.current_iset,
-				di->ccm.original_iset,
-				di->ccm.level);
-			return MAXIM_RET_CHANGE;
-		} else {
-			return MAXIM_RET_NOACTION;
-		}
-	}  else {
-		di->ccm.condition_cnt = di->bat->maxi->wait_cycles;
-		return MAXIM_RET_NOACTION;
-	}
-}
-
-static void handle_maxim_chg_curr(struct abx500_chargalg *di)
-{
-	enum maxim_ret ret;
-	int result;
-
-	ret = abx500_chargalg_chg_curr_maxim(di);
-	switch (ret) {
-	case MAXIM_RET_CHANGE:
-		result = abx500_chargalg_update_chg_curr(di,
-			di->ccm.current_iset);
-		if (result)
-			dev_err(di->dev, "failed to set chg curr\n");
-		break;
-	case MAXIM_RET_IBAT_TOO_HIGH:
-		result = abx500_chargalg_update_chg_curr(di,
-			di->bat->bat_type[di->bat->batt_id].normal_cur_lvl);
-		if (result)
-			dev_err(di->dev, "failed to set chg curr\n");
-		break;
-
-	case MAXIM_RET_NOACTION:
-	default:
-		/* Do nothing..*/
-		break;
-	}
-}
-
-static int abx500_chargalg_get_ext_psy_data(struct device *dev, void *data)
-{
-	struct power_supply *psy;
-	struct power_supply *ext;
-	struct abx500_chargalg *di;
-	union power_supply_propval ret;
-	int i, j;
-	bool psy_found = false;
-
-	psy = (struct power_supply *)data;
-	ext = dev_get_drvdata(dev);
-	di = to_abx500_chargalg_device_info(psy);
-	/* For all psy where the driver name appears in any supplied_to */
-	for (i = 0; i < ext->num_supplicants; i++) {
-		if (!strcmp(ext->supplied_to[i], psy->name))
-			psy_found = true;
-	}
-	if (!psy_found)
-		return 0;
-
-	/* Go through all properties for the psy */
-	for (j = 0; j < ext->num_properties; j++) {
-		enum power_supply_property prop;
-		prop = ext->properties[j];
-
-		/* Initialize chargers if not already done */
-		if (!di->ac_chg &&
-			ext->type == POWER_SUPPLY_TYPE_MAINS)
-			di->ac_chg = psy_to_ux500_charger(ext);
-		else if (!di->usb_chg &&
-			ext->type == POWER_SUPPLY_TYPE_USB)
-			di->usb_chg = psy_to_ux500_charger(ext);
-
-		if (ext->get_property(ext, prop, &ret))
-			continue;
-		switch (prop) {
-		case POWER_SUPPLY_PROP_PRESENT:
-			switch (ext->type) {
-			case POWER_SUPPLY_TYPE_BATTERY:
-				/* Battery present */
-				if (ret.intval)
-					di->events.batt_rem = false;
-				/* Battery removed */
-				else
-					di->events.batt_rem = true;
-				break;
-			case POWER_SUPPLY_TYPE_MAINS:
-				/* AC disconnected */
-				if (!ret.intval &&
-					(di->chg_info.conn_chg & AC_CHG)) {
-					di->chg_info.prev_conn_chg =
-						di->chg_info.conn_chg;
-					di->chg_info.conn_chg &= ~AC_CHG;
-				}
-				/* AC connected */
-				else if (ret.intval &&
-					!(di->chg_info.conn_chg & AC_CHG)) {
-					di->chg_info.prev_conn_chg =
-						di->chg_info.conn_chg;
-					di->chg_info.conn_chg |= AC_CHG;
-				}
-				break;
-			case POWER_SUPPLY_TYPE_USB:
-				/* USB disconnected */
-				if (!ret.intval &&
-					(di->chg_info.conn_chg & USB_CHG)) {
-					di->chg_info.prev_conn_chg =
-						di->chg_info.conn_chg;
-					di->chg_info.conn_chg &= ~USB_CHG;
-				}
-				/* USB connected */
-				else if (ret.intval &&
-					!(di->chg_info.conn_chg & USB_CHG)) {
-					di->chg_info.prev_conn_chg =
-						di->chg_info.conn_chg;
-					di->chg_info.conn_chg |= USB_CHG;
-				}
-				break;
-			default:
-				break;
-			}
-			break;
-
-		case POWER_SUPPLY_PROP_ONLINE:
-			switch (ext->type) {
-			case POWER_SUPPLY_TYPE_BATTERY:
-				break;
-			case POWER_SUPPLY_TYPE_MAINS:
-				/* AC offline */
-				if (!ret.intval &&
-					(di->chg_info.online_chg & AC_CHG)) {
-					di->chg_info.prev_online_chg =
-						di->chg_info.online_chg;
-					di->chg_info.online_chg &= ~AC_CHG;
-				}
-				/* AC online */
-				else if (ret.intval &&
-					!(di->chg_info.online_chg & AC_CHG)) {
-					di->chg_info.prev_online_chg =
-						di->chg_info.online_chg;
-					di->chg_info.online_chg |= AC_CHG;
-					queue_delayed_work(di->chargalg_wq,
-						&di->chargalg_wd_work, 0);
-				}
-				break;
-			case POWER_SUPPLY_TYPE_USB:
-				/* USB offline */
-				if (!ret.intval &&
-					(di->chg_info.online_chg & USB_CHG)) {
-					di->chg_info.prev_online_chg =
-						di->chg_info.online_chg;
-					di->chg_info.online_chg &= ~USB_CHG;
-				}
-				/* USB online */
-				else if (ret.intval &&
-					!(di->chg_info.online_chg & USB_CHG)) {
-					di->chg_info.prev_online_chg =
-						di->chg_info.online_chg;
-					di->chg_info.online_chg |= USB_CHG;
-					queue_delayed_work(di->chargalg_wq,
-						&di->chargalg_wd_work, 0);
-				}
-				break;
-			default:
-				break;
-			}
-			break;
-
-		case POWER_SUPPLY_PROP_HEALTH:
-			switch (ext->type) {
-			case POWER_SUPPLY_TYPE_BATTERY:
-				break;
-			case POWER_SUPPLY_TYPE_MAINS:
-				switch (ret.intval) {
-				case POWER_SUPPLY_HEALTH_UNSPEC_FAILURE:
-					di->events.mainextchnotok = true;
-					di->events.main_thermal_prot = false;
-					di->events.main_ovv = false;
-					di->events.ac_wd_expired = false;
-					break;
-				case POWER_SUPPLY_HEALTH_DEAD:
-					di->events.ac_wd_expired = true;
-					di->events.mainextchnotok = false;
-					di->events.main_ovv = false;
-					di->events.main_thermal_prot = false;
-					break;
-				case POWER_SUPPLY_HEALTH_COLD:
-				case POWER_SUPPLY_HEALTH_OVERHEAT:
-					di->events.main_thermal_prot = true;
-					di->events.mainextchnotok = false;
-					di->events.main_ovv = false;
-					di->events.ac_wd_expired = false;
-					break;
-				case POWER_SUPPLY_HEALTH_OVERVOLTAGE:
-					di->events.main_ovv = true;
-					di->events.mainextchnotok = false;
-					di->events.main_thermal_prot = false;
-					di->events.ac_wd_expired = false;
-					break;
-				case POWER_SUPPLY_HEALTH_GOOD:
-					di->events.main_thermal_prot = false;
-					di->events.mainextchnotok = false;
-					di->events.main_ovv = false;
-					di->events.ac_wd_expired = false;
-					break;
-				default:
-					break;
-				}
-				break;
-
-			case POWER_SUPPLY_TYPE_USB:
-				switch (ret.intval) {
-				case POWER_SUPPLY_HEALTH_UNSPEC_FAILURE:
-					di->events.usbchargernotok = true;
-					di->events.usb_thermal_prot = false;
-					di->events.vbus_ovv = false;
-					di->events.usb_wd_expired = false;
-					break;
-				case POWER_SUPPLY_HEALTH_DEAD:
-					di->events.usb_wd_expired = true;
-					di->events.usbchargernotok = false;
-					di->events.usb_thermal_prot = false;
-					di->events.vbus_ovv = false;
-					break;
-				case POWER_SUPPLY_HEALTH_COLD:
-				case POWER_SUPPLY_HEALTH_OVERHEAT:
-					di->events.usb_thermal_prot = true;
-					di->events.usbchargernotok = false;
-					di->events.vbus_ovv = false;
-					di->events.usb_wd_expired = false;
-					break;
-				case POWER_SUPPLY_HEALTH_OVERVOLTAGE:
-					di->events.vbus_ovv = true;
-					di->events.usbchargernotok = false;
-					di->events.usb_thermal_prot = false;
-					di->events.usb_wd_expired = false;
-					break;
-				case POWER_SUPPLY_HEALTH_GOOD:
-					di->events.usbchargernotok = false;
-					di->events.usb_thermal_prot = false;
-					di->events.vbus_ovv = false;
-					di->events.usb_wd_expired = false;
-					break;
-				default:
-					break;
-				}
-			default:
-				break;
-			}
-			break;
-
-		case POWER_SUPPLY_PROP_VOLTAGE_NOW:
-			switch (ext->type) {
-			case POWER_SUPPLY_TYPE_BATTERY:
-				di->batt_data.volt = ret.intval / 1000;
-				break;
-			case POWER_SUPPLY_TYPE_MAINS:
-				di->chg_info.ac_volt = ret.intval / 1000;
-				break;
-			case POWER_SUPPLY_TYPE_USB:
-				di->chg_info.usb_volt = ret.intval / 1000;
-				break;
-			default:
-				break;
-			}
-			break;
-
-		case POWER_SUPPLY_PROP_VOLTAGE_AVG:
-			switch (ext->type) {
-			case POWER_SUPPLY_TYPE_MAINS:
-				/* AVG is used to indicate when we are
-				 * in CV mode */
-				if (ret.intval)
-					di->events.ac_cv_active = true;
-				else
-					di->events.ac_cv_active = false;
-
-				break;
-			case POWER_SUPPLY_TYPE_USB:
-				/* AVG is used to indicate when we are
-				 * in CV mode */
-				if (ret.intval)
-					di->events.usb_cv_active = true;
-				else
-					di->events.usb_cv_active = false;
-
-				break;
-			default:
-				break;
-			}
-			break;
-
-		case POWER_SUPPLY_PROP_TECHNOLOGY:
-			switch (ext->type) {
-			case POWER_SUPPLY_TYPE_BATTERY:
-				if (ret.intval)
-					di->events.batt_unknown = false;
-				else
-					di->events.batt_unknown = true;
-
-				break;
-			default:
-				break;
-			}
-			break;
-
-		case POWER_SUPPLY_PROP_TEMP:
-			di->batt_data.temp = ret.intval / 10;
-			break;
-
-		case POWER_SUPPLY_PROP_CURRENT_NOW:
-			switch (ext->type) {
-			case POWER_SUPPLY_TYPE_MAINS:
-					di->chg_info.ac_curr =
-						ret.intval / 1000;
-					break;
-			case POWER_SUPPLY_TYPE_USB:
-					di->chg_info.usb_curr =
-						ret.intval / 1000;
-				break;
-			case POWER_SUPPLY_TYPE_BATTERY:
-				di->batt_data.inst_curr = ret.intval / 1000;
-				break;
-			default:
-				break;
-			}
-			break;
-
-		case POWER_SUPPLY_PROP_CURRENT_AVG:
-			switch (ext->type) {
-			case POWER_SUPPLY_TYPE_BATTERY:
-				di->batt_data.avg_curr = ret.intval / 1000;
-				break;
-			case POWER_SUPPLY_TYPE_USB:
-				if (ret.intval)
-					di->events.vbus_collapsed = true;
-				else
-					di->events.vbus_collapsed = false;
-				break;
-			default:
-				break;
-			}
-			break;
-		case POWER_SUPPLY_PROP_CAPACITY:
-			di->batt_data.percent = ret.intval;
-			break;
-		default:
-			break;
-		}
-	}
-	return 0;
-}
-
-/**
- * abx500_chargalg_external_power_changed() - callback for power supply changes
- * @psy:       pointer to the structure power_supply
- *
- * This function is the entry point of the pointer external_power_changed
- * of the structure power_supply.
- * This function gets executed when there is a change in any external power
- * supply that this driver needs to be notified of.
- */
-static void abx500_chargalg_external_power_changed(struct power_supply *psy)
-{
-	struct abx500_chargalg *di = to_abx500_chargalg_device_info(psy);
-
-	/*
-	 * Trigger execution of the algorithm instantly and read
-	 * all power_supply properties there instead
-	 */
-	queue_work(di->chargalg_wq, &di->chargalg_work);
-}
-
-/**
- * abx500_chargalg_algorithm() - Main function for the algorithm
- * @di:		pointer to the abx500_chargalg structure
- *
- * This is the main control function for the charging algorithm.
- * It is called periodically or when something happens that will
- * trigger a state change
- */
-static void abx500_chargalg_algorithm(struct abx500_chargalg *di)
-{
-	int charger_status;
-
-	/* Collect data from all power_supply class devices */
-	class_for_each_device(power_supply_class, NULL,
-		&di->chargalg_psy, abx500_chargalg_get_ext_psy_data);
-
-	abx500_chargalg_end_of_charge(di);
-	abx500_chargalg_check_temp(di);
-	abx500_chargalg_check_charger_voltage(di);
-
-	charger_status = abx500_chargalg_check_charger_connection(di);
-	/*
-	 * First check if we have a charger connected.
-	 * Also we don't allow charging of unknown batteries if configured
-	 * this way
-	 */
-	if (!charger_status ||
-		(di->events.batt_unknown && !di->bat->chg_unknown_bat)) {
-		if (di->charge_state != STATE_HANDHELD) {
-			di->events.safety_timer_expired = false;
-			abx500_chargalg_state_to(di, STATE_HANDHELD_INIT);
-		}
-	}
-
-	/* If suspended, we should not continue checking the flags */
-	else if (di->charge_state == STATE_SUSPENDED_INIT ||
-		di->charge_state == STATE_SUSPENDED) {
-		/* We don't do anything here, just don,t continue */
-	}
-
-	/* Safety timer expiration */
-	else if (di->events.safety_timer_expired) {
-		if (di->charge_state != STATE_SAFETY_TIMER_EXPIRED)
-			abx500_chargalg_state_to(di,
-				STATE_SAFETY_TIMER_EXPIRED_INIT);
-	}
-	/*
-	 * Check if any interrupts has occured
-	 * that will prevent us from charging
-	 */
-
-	/* Battery removed */
-	else if (di->events.batt_rem) {
-		if (di->charge_state != STATE_BATT_REMOVED)
-			abx500_chargalg_state_to(di, STATE_BATT_REMOVED_INIT);
-	}
-	/* Main or USB charger not ok. */
-	else if (di->events.mainextchnotok || di->events.usbchargernotok) {
-		/*
-		 * If vbus_collapsed is set, we have to lower the charger
-		 * current, which is done in the normal state below
-		 */
-		if (di->charge_state != STATE_CHG_NOT_OK &&
-				!di->events.vbus_collapsed)
-			abx500_chargalg_state_to(di, STATE_CHG_NOT_OK_INIT);
-	}
-	/* VBUS, Main or VBAT OVV. */
-	else if (di->events.vbus_ovv ||
-			di->events.main_ovv ||
-			di->events.batt_ovv ||
-			!di->chg_info.usb_chg_ok ||
-			!di->chg_info.ac_chg_ok) {
-		if (di->charge_state != STATE_OVV_PROTECT)
-			abx500_chargalg_state_to(di, STATE_OVV_PROTECT_INIT);
-	}
-	/* USB Thermal, stop charging */
-	else if (di->events.main_thermal_prot ||
-		di->events.usb_thermal_prot) {
-		if (di->charge_state != STATE_HW_TEMP_PROTECT)
-			abx500_chargalg_state_to(di,
-				STATE_HW_TEMP_PROTECT_INIT);
-	}
-	/* Battery temp over/under */
-	else if (di->events.btemp_underover) {
-		if (di->charge_state != STATE_TEMP_UNDEROVER)
-			abx500_chargalg_state_to(di,
-				STATE_TEMP_UNDEROVER_INIT);
-	}
-	/* Watchdog expired */
-	else if (di->events.ac_wd_expired ||
-		di->events.usb_wd_expired) {
-		if (di->charge_state != STATE_WD_EXPIRED)
-			abx500_chargalg_state_to(di, STATE_WD_EXPIRED_INIT);
-	}
-	/* Battery temp high/low */
-	else if (di->events.btemp_lowhigh) {
-		if (di->charge_state != STATE_TEMP_LOWHIGH)
-			abx500_chargalg_state_to(di, STATE_TEMP_LOWHIGH_INIT);
-	}
-
-	dev_dbg(di->dev,
-		"[CHARGALG] Vb %d Ib_avg %d Ib_inst %d Tb %d Cap %d Maint %d "
-		"State %s Active_chg %d Chg_status %d AC %d USB %d "
-		"AC_online %d USB_online %d AC_CV %d USB_CV %d AC_I %d "
-		"USB_I %d AC_Vset %d AC_Iset %d USB_Vset %d USB_Iset %d\n",
-		di->batt_data.volt,
-		di->batt_data.avg_curr,
-		di->batt_data.inst_curr,
-		di->batt_data.temp,
-		di->batt_data.percent,
-		di->maintenance_chg,
-		states[di->charge_state],
-		di->chg_info.charger_type,
-		di->charge_status,
-		di->chg_info.conn_chg & AC_CHG,
-		di->chg_info.conn_chg & USB_CHG,
-		di->chg_info.online_chg & AC_CHG,
-		di->chg_info.online_chg & USB_CHG,
-		di->events.ac_cv_active,
-		di->events.usb_cv_active,
-		di->chg_info.ac_curr,
-		di->chg_info.usb_curr,
-		di->chg_info.ac_vset,
-		di->chg_info.ac_iset,
-		di->chg_info.usb_vset,
-		di->chg_info.usb_iset);
-
-	switch (di->charge_state) {
-	case STATE_HANDHELD_INIT:
-		abx500_chargalg_stop_charging(di);
-		di->charge_status = POWER_SUPPLY_STATUS_DISCHARGING;
-		abx500_chargalg_state_to(di, STATE_HANDHELD);
-		/* Intentional fallthrough */
-
-	case STATE_HANDHELD:
-		break;
-
-	case STATE_SUSPENDED_INIT:
-		if (di->susp_status.ac_suspended)
-			abx500_chargalg_ac_en(di, false, 0, 0);
-		if (di->susp_status.usb_suspended)
-			abx500_chargalg_usb_en(di, false, 0, 0);
-		abx500_chargalg_stop_safety_timer(di);
-		abx500_chargalg_stop_maintenance_timer(di);
-		di->charge_status = POWER_SUPPLY_STATUS_NOT_CHARGING;
-		di->maintenance_chg = false;
-		abx500_chargalg_state_to(di, STATE_SUSPENDED);
-		power_supply_changed(&di->chargalg_psy);
-		/* Intentional fallthrough */
-
-	case STATE_SUSPENDED:
-		/* CHARGING is suspended */
-		break;
-
-	case STATE_BATT_REMOVED_INIT:
-		abx500_chargalg_stop_charging(di);
-		abx500_chargalg_state_to(di, STATE_BATT_REMOVED);
-		/* Intentional fallthrough */
-
-	case STATE_BATT_REMOVED:
-		if (!di->events.batt_rem)
-			abx500_chargalg_state_to(di, STATE_NORMAL_INIT);
-		break;
-
-	case STATE_HW_TEMP_PROTECT_INIT:
-		abx500_chargalg_stop_charging(di);
-		abx500_chargalg_state_to(di, STATE_HW_TEMP_PROTECT);
-		/* Intentional fallthrough */
-
-	case STATE_HW_TEMP_PROTECT:
-		if (!di->events.main_thermal_prot &&
-				!di->events.usb_thermal_prot)
-			abx500_chargalg_state_to(di, STATE_NORMAL_INIT);
-		break;
-
-	case STATE_OVV_PROTECT_INIT:
-		abx500_chargalg_stop_charging(di);
-		abx500_chargalg_state_to(di, STATE_OVV_PROTECT);
-		/* Intentional fallthrough */
-
-	case STATE_OVV_PROTECT:
-		if (!di->events.vbus_ovv &&
-				!di->events.main_ovv &&
-				!di->events.batt_ovv &&
-				di->chg_info.usb_chg_ok &&
-				di->chg_info.ac_chg_ok)
-			abx500_chargalg_state_to(di, STATE_NORMAL_INIT);
-		break;
-
-	case STATE_CHG_NOT_OK_INIT:
-		abx500_chargalg_stop_charging(di);
-		abx500_chargalg_state_to(di, STATE_CHG_NOT_OK);
-		/* Intentional fallthrough */
-
-	case STATE_CHG_NOT_OK:
-		if (!di->events.mainextchnotok &&
-				!di->events.usbchargernotok)
-			abx500_chargalg_state_to(di, STATE_NORMAL_INIT);
-		break;
-
-	case STATE_SAFETY_TIMER_EXPIRED_INIT:
-		abx500_chargalg_stop_charging(di);
-		abx500_chargalg_state_to(di, STATE_SAFETY_TIMER_EXPIRED);
-		/* Intentional fallthrough */
-
-	case STATE_SAFETY_TIMER_EXPIRED:
-		/* We exit this state when charger is removed */
-		break;
-
-	case STATE_NORMAL_INIT:
-		abx500_chargalg_start_charging(di,
-			di->bat->bat_type[di->bat->batt_id].normal_vol_lvl,
-			di->bat->bat_type[di->bat->batt_id].normal_cur_lvl);
-		abx500_chargalg_state_to(di, STATE_NORMAL);
-		abx500_chargalg_start_safety_timer(di);
-		abx500_chargalg_stop_maintenance_timer(di);
-		init_maxim_chg_curr(di);
-		di->charge_status = POWER_SUPPLY_STATUS_CHARGING;
-		di->eoc_cnt = 0;
-		di->maintenance_chg = false;
-		power_supply_changed(&di->chargalg_psy);
-
-		break;
-
-	case STATE_NORMAL:
-		handle_maxim_chg_curr(di);
-		if (di->charge_status == POWER_SUPPLY_STATUS_FULL &&
-			di->maintenance_chg) {
-			if (di->bat->no_maintenance)
-				abx500_chargalg_state_to(di,
-					STATE_WAIT_FOR_RECHARGE_INIT);
-			else
-				abx500_chargalg_state_to(di,
-					STATE_MAINTENANCE_A_INIT);
-		}
-		break;
-
-	/* This state will be used when the maintenance state is disabled */
-	case STATE_WAIT_FOR_RECHARGE_INIT:
-		abx500_chargalg_hold_charging(di);
-		abx500_chargalg_state_to(di, STATE_WAIT_FOR_RECHARGE);
-		di->rch_cnt = RCH_COND_CNT;
-		/* Intentional fallthrough */
-
-	case STATE_WAIT_FOR_RECHARGE:
-		if (di->batt_data.volt <=
-			di->bat->bat_type[di->bat->batt_id].recharge_vol) {
-			if (di->rch_cnt-- == 0)
-				abx500_chargalg_state_to(di, STATE_NORMAL_INIT);
-		} else
-			di->rch_cnt = RCH_COND_CNT;
-		break;
-
-	case STATE_MAINTENANCE_A_INIT:
-		abx500_chargalg_stop_safety_timer(di);
-		abx500_chargalg_start_maintenance_timer(di,
-			di->bat->bat_type[
-				di->bat->batt_id].maint_a_chg_timer_h);
-		abx500_chargalg_start_charging(di,
-			di->bat->bat_type[
-				di->bat->batt_id].maint_a_vol_lvl,
-			di->bat->bat_type[
-				di->bat->batt_id].maint_a_cur_lvl);
-		abx500_chargalg_state_to(di, STATE_MAINTENANCE_A);
-		power_supply_changed(&di->chargalg_psy);
-		/* Intentional fallthrough*/
-
-	case STATE_MAINTENANCE_A:
-		if (di->events.maintenance_timer_expired) {
-			abx500_chargalg_stop_maintenance_timer(di);
-			abx500_chargalg_state_to(di, STATE_MAINTENANCE_B_INIT);
-		}
-		break;
-
-	case STATE_MAINTENANCE_B_INIT:
-		abx500_chargalg_start_maintenance_timer(di,
-			di->bat->bat_type[
-				di->bat->batt_id].maint_b_chg_timer_h);
-		abx500_chargalg_start_charging(di,
-			di->bat->bat_type[
-				di->bat->batt_id].maint_b_vol_lvl,
-			di->bat->bat_type[
-				di->bat->batt_id].maint_b_cur_lvl);
-		abx500_chargalg_state_to(di, STATE_MAINTENANCE_B);
-		power_supply_changed(&di->chargalg_psy);
-		/* Intentional fallthrough*/
-
-	case STATE_MAINTENANCE_B:
-		if (di->events.maintenance_timer_expired) {
-			abx500_chargalg_stop_maintenance_timer(di);
-			abx500_chargalg_state_to(di, STATE_NORMAL_INIT);
-		}
-		break;
-
-	case STATE_TEMP_LOWHIGH_INIT:
-		abx500_chargalg_start_charging(di,
-			di->bat->bat_type[
-				di->bat->batt_id].low_high_vol_lvl,
-			di->bat->bat_type[
-				di->bat->batt_id].low_high_cur_lvl);
-		abx500_chargalg_stop_maintenance_timer(di);
-		di->charge_status = POWER_SUPPLY_STATUS_CHARGING;
-		abx500_chargalg_state_to(di, STATE_TEMP_LOWHIGH);
-		power_supply_changed(&di->chargalg_psy);
-		/* Intentional fallthrough */
-
-	case STATE_TEMP_LOWHIGH:
-		if (!di->events.btemp_lowhigh)
-			abx500_chargalg_state_to(di, STATE_NORMAL_INIT);
-		break;
-
-	case STATE_WD_EXPIRED_INIT:
-		abx500_chargalg_stop_charging(di);
-		abx500_chargalg_state_to(di, STATE_WD_EXPIRED);
-		/* Intentional fallthrough */
-
-	case STATE_WD_EXPIRED:
-		if (!di->events.ac_wd_expired &&
-				!di->events.usb_wd_expired)
-			abx500_chargalg_state_to(di, STATE_NORMAL_INIT);
-		break;
-
-	case STATE_TEMP_UNDEROVER_INIT:
-		abx500_chargalg_stop_charging(di);
-		abx500_chargalg_state_to(di, STATE_TEMP_UNDEROVER);
-		/* Intentional fallthrough */
-
-	case STATE_TEMP_UNDEROVER:
-		if (!di->events.btemp_underover)
-			abx500_chargalg_state_to(di, STATE_NORMAL_INIT);
-		break;
-	}
-
-	/* Start charging directly if the new state is a charge state */
-	if (di->charge_state == STATE_NORMAL_INIT ||
-			di->charge_state == STATE_MAINTENANCE_A_INIT ||
-			di->charge_state == STATE_MAINTENANCE_B_INIT)
-		queue_work(di->chargalg_wq, &di->chargalg_work);
-}
-
-/**
- * abx500_chargalg_periodic_work() - Periodic work for the algorithm
- * @work:	pointer to the work_struct structure
- *
- * Work queue function for the charging algorithm
- */
-static void abx500_chargalg_periodic_work(struct work_struct *work)
-{
-	struct abx500_chargalg *di = container_of(work,
-		struct abx500_chargalg, chargalg_periodic_work.work);
-
-	abx500_chargalg_algorithm(di);
-
-	/*
-	 * If a charger is connected then the battery has to be monitored
-	 * frequently, else the work can be delayed.
-	 */
-	if (di->chg_info.conn_chg)
-		queue_delayed_work(di->chargalg_wq,
-			&di->chargalg_periodic_work,
-			di->bat->interval_charging * HZ);
-	else
-		queue_delayed_work(di->chargalg_wq,
-			&di->chargalg_periodic_work,
-			di->bat->interval_not_charging * HZ);
-}
-
-/**
- * abx500_chargalg_wd_work() - periodic work to kick the charger watchdog
- * @work:	pointer to the work_struct structure
- *
- * Work queue function for kicking the charger watchdog
- */
-static void abx500_chargalg_wd_work(struct work_struct *work)
-{
-	int ret;
-	struct abx500_chargalg *di = container_of(work,
-		struct abx500_chargalg, chargalg_wd_work.work);
-
-	dev_dbg(di->dev, "abx500_chargalg_wd_work\n");
-
-	ret = abx500_chargalg_kick_watchdog(di);
-	if (ret < 0)
-		dev_err(di->dev, "failed to kick watchdog\n");
-
-	queue_delayed_work(di->chargalg_wq,
-		&di->chargalg_wd_work, CHG_WD_INTERVAL);
-}
-
-/**
- * abx500_chargalg_work() - Work to run the charging algorithm instantly
- * @work:	pointer to the work_struct structure
- *
- * Work queue function for calling the charging algorithm
- */
-static void abx500_chargalg_work(struct work_struct *work)
-{
-	struct abx500_chargalg *di = container_of(work,
-		struct abx500_chargalg, chargalg_work);
-
-	abx500_chargalg_algorithm(di);
-}
-
-/**
- * abx500_chargalg_get_property() - get the chargalg properties
- * @psy:	pointer to the power_supply structure
- * @psp:	pointer to the power_supply_property structure
- * @val:	pointer to the power_supply_propval union
- *
- * This function gets called when an application tries to get the
- * chargalg properties by reading the sysfs files.
- * status:     charging/discharging/full/unknown
- * health:     health of the battery
- * Returns error code in case of failure else 0 on success
- */
-static int abx500_chargalg_get_property(struct power_supply *psy,
-	enum power_supply_property psp,
-	union power_supply_propval *val)
-{
-	struct abx500_chargalg *di;
-
-	di = to_abx500_chargalg_device_info(psy);
-
-	switch (psp) {
-	case POWER_SUPPLY_PROP_STATUS:
-		val->intval = di->charge_status;
-		break;
-	case POWER_SUPPLY_PROP_HEALTH:
-		if (di->events.batt_ovv) {
-			val->intval = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
-		} else if (di->events.btemp_underover) {
-			if (di->batt_data.temp <= di->bat->temp_under)
-				val->intval = POWER_SUPPLY_HEALTH_COLD;
-			else
-				val->intval = POWER_SUPPLY_HEALTH_OVERHEAT;
-		} else {
-			val->intval = POWER_SUPPLY_HEALTH_GOOD;
-		}
-		break;
-	default:
-		return -EINVAL;
-	}
-	return 0;
-}
-
-/* Exposure to the sysfs interface */
-
-/**
- * abx500_chargalg_sysfs_charger() - sysfs store operations
- * @kobj:      pointer to the struct kobject
- * @attr:      pointer to the struct attribute
- * @buf:       buffer that holds the parameter passed from userspace
- * @length:    length of the parameter passed
- *
- * Returns length of the buffer(input taken from user space) on success
- * else error code on failure
- * The operation to be performed on passing the parameters from the user space.
- */
-static ssize_t abx500_chargalg_sysfs_charger(struct kobject *kobj,
-	struct attribute *attr, const char *buf, size_t length)
-{
-	struct abx500_chargalg *di = container_of(kobj,
-		struct abx500_chargalg, chargalg_kobject);
-	long int param;
-	int ac_usb;
-	int ret;
-	char entry = *attr->name;
-
-	switch (entry) {
-	case 'c':
-		ret = strict_strtol(buf, 10, &param);
-		if (ret < 0)
-			return ret;
-
-		ac_usb = param;
-		switch (ac_usb) {
-		case 0:
-			/* Disable charging */
-			di->susp_status.ac_suspended = true;
-			di->susp_status.usb_suspended = true;
-			di->susp_status.suspended_change = true;
-			/* Trigger a state change */
-			queue_work(di->chargalg_wq,
-				&di->chargalg_work);
-			break;
-		case 1:
-			/* Enable AC Charging */
-			di->susp_status.ac_suspended = false;
-			di->susp_status.suspended_change = true;
-			/* Trigger a state change */
-			queue_work(di->chargalg_wq,
-				&di->chargalg_work);
-			break;
-		case 2:
-			/* Enable USB charging */
-			di->susp_status.usb_suspended = false;
-			di->susp_status.suspended_change = true;
-			/* Trigger a state change */
-			queue_work(di->chargalg_wq,
-				&di->chargalg_work);
-			break;
-		default:
-			dev_info(di->dev, "Wrong input\n"
-				"Enter 0. Disable AC/USB Charging\n"
-				"1. Enable AC charging\n"
-				"2. Enable USB Charging\n");
-		};
-		break;
-	};
-	return strlen(buf);
-}
-
-static struct attribute abx500_chargalg_en_charger = \
-{
-	.name = "chargalg",
-	.mode = S_IWUGO,
-};
-
-static struct attribute *abx500_chargalg_chg[] = {
-	&abx500_chargalg_en_charger,
-	NULL
-};
-
-static const struct sysfs_ops abx500_chargalg_sysfs_ops = {
-	.store = abx500_chargalg_sysfs_charger,
-};
-
-static struct kobj_type abx500_chargalg_ktype = {
-	.sysfs_ops = &abx500_chargalg_sysfs_ops,
-	.default_attrs = abx500_chargalg_chg,
-};
-
-/**
- * abx500_chargalg_sysfs_exit() - de-init of sysfs entry
- * @di:                pointer to the struct abx500_chargalg
- *
- * This function removes the entry in sysfs.
- */
-static void abx500_chargalg_sysfs_exit(struct abx500_chargalg *di)
-{
-	kobject_del(&di->chargalg_kobject);
-}
-
-/**
- * abx500_chargalg_sysfs_init() - init of sysfs entry
- * @di:                pointer to the struct abx500_chargalg
- *
- * This function adds an entry in sysfs.
- * Returns error code in case of failure else 0(on success)
- */
-static int abx500_chargalg_sysfs_init(struct abx500_chargalg *di)
-{
-	int ret = 0;
-
-	ret = kobject_init_and_add(&di->chargalg_kobject,
-		&abx500_chargalg_ktype,
-		NULL, "abx500_chargalg");
-	if (ret < 0)
-		dev_err(di->dev, "failed to create sysfs entry\n");
-
-	return ret;
-}
-/* Exposure to the sysfs interface <<END>> */
-
-#if defined(CONFIG_PM)
-static int abx500_chargalg_resume(struct platform_device *pdev)
-{
-	struct abx500_chargalg *di = platform_get_drvdata(pdev);
-
-	/* Kick charger watchdog if charging (any charger online) */
-	if (di->chg_info.online_chg)
-		queue_delayed_work(di->chargalg_wq, &di->chargalg_wd_work, 0);
-
-	/*
-	 * Run the charging algorithm directly to be sure we don't
-	 * do it too seldom
-	 */
-	queue_delayed_work(di->chargalg_wq, &di->chargalg_periodic_work, 0);
-
-	return 0;
-}
-
-static int abx500_chargalg_suspend(struct platform_device *pdev,
-	pm_message_t state)
-{
-	struct abx500_chargalg *di = platform_get_drvdata(pdev);
-
-	if (di->chg_info.online_chg)
-		cancel_delayed_work_sync(&di->chargalg_wd_work);
-
-	cancel_delayed_work_sync(&di->chargalg_periodic_work);
-
-	return 0;
-}
-#else
-#define abx500_chargalg_suspend      NULL
-#define abx500_chargalg_resume       NULL
-#endif
-
-static int __devexit abx500_chargalg_remove(struct platform_device *pdev)
-{
-	struct abx500_chargalg *di = platform_get_drvdata(pdev);
-
-	/* sysfs interface to enable/disbale charging from user space */
-	abx500_chargalg_sysfs_exit(di);
-
-	/* Delete the work queue */
-	destroy_workqueue(di->chargalg_wq);
-
-	flush_scheduled_work();
-	power_supply_unregister(&di->chargalg_psy);
-	platform_set_drvdata(pdev, NULL);
-	kfree(di);
-
-	return 0;
-}
-
-static int __devinit abx500_chargalg_probe(struct platform_device *pdev)
-{
-	struct abx500_bm_plat_data *plat_data;
-	int ret = 0;
-
-	struct abx500_chargalg *di =
-		kzalloc(sizeof(struct abx500_chargalg), GFP_KERNEL);
-	if (!di)
-		return -ENOMEM;
-
-	/* get device struct */
-	di->dev = &pdev->dev;
-
-	plat_data = pdev->dev.platform_data;
-	di->pdata = plat_data->chargalg;
-	di->bat = plat_data->battery;
-
-	/* chargalg supply */
-	di->chargalg_psy.name = "abx500_chargalg";
-	di->chargalg_psy.type = POWER_SUPPLY_TYPE_BATTERY;
-	di->chargalg_psy.properties = abx500_chargalg_props;
-	di->chargalg_psy.num_properties = ARRAY_SIZE(abx500_chargalg_props);
-	di->chargalg_psy.get_property = abx500_chargalg_get_property;
-	di->chargalg_psy.supplied_to = di->pdata->supplied_to;
-	di->chargalg_psy.num_supplicants = di->pdata->num_supplicants;
-	di->chargalg_psy.external_power_changed =
-		abx500_chargalg_external_power_changed;
-
-	/* Initilialize safety timer */
-	init_timer(&di->safety_timer);
-	di->safety_timer.function = abx500_chargalg_safety_timer_expired;
-	di->safety_timer.data = (unsigned long) di;
-
-	/* Initilialize maintenance timer */
-	init_timer(&di->maintenance_timer);
-	di->maintenance_timer.function =
-		abx500_chargalg_maintenance_timer_expired;
-	di->maintenance_timer.data = (unsigned long) di;
-
-	/* Create a work queue for the chargalg */
-	di->chargalg_wq =
-		create_singlethread_workqueue("abx500_chargalg_wq");
-	if (di->chargalg_wq == NULL) {
-		dev_err(di->dev, "failed to create work queue\n");
-		goto free_device_info;
-	}
-
-	/* Init work for chargalg */
-	INIT_DELAYED_WORK_DEFERRABLE(&di->chargalg_periodic_work,
-		abx500_chargalg_periodic_work);
-	INIT_DELAYED_WORK_DEFERRABLE(&di->chargalg_wd_work,
-		abx500_chargalg_wd_work);
-
-	/* Init work for chargalg */
-	INIT_WORK(&di->chargalg_work, abx500_chargalg_work);
-
-	/* To detect charger at startup */
-	di->chg_info.prev_conn_chg = -1;
-
-	/* Register chargalg power supply class */
-	ret = power_supply_register(di->dev, &di->chargalg_psy);
-	if (ret) {
-		dev_err(di->dev, "failed to register chargalg psy\n");
-		goto free_chargalg_wq;
-	}
-
-	platform_set_drvdata(pdev, di);
-
-	/* sysfs interface to enable/disable charging from user space */
-	ret = abx500_chargalg_sysfs_init(di);
-	if (ret) {
-		dev_err(di->dev, "failed to create sysfs entry\n");
-		goto free_psy;
-	}
-
-	/* Run the charging algorithm */
-	queue_delayed_work(di->chargalg_wq, &di->chargalg_periodic_work, 0);
-
-	dev_info(di->dev, "probe success\n");
-	return ret;
-
-free_psy:
-	power_supply_unregister(&di->chargalg_psy);
-free_chargalg_wq:
-	destroy_workqueue(di->chargalg_wq);
-free_device_info:
-	kfree(di);
-
-	return ret;
-}
-
-static struct platform_driver abx500_chargalg_driver = {
-	.probe = abx500_chargalg_probe,
-	.remove = __devexit_p(abx500_chargalg_remove),
-	.suspend = abx500_chargalg_suspend,
-	.resume = abx500_chargalg_resume,
-	.driver = {
-		.name = "abx500-chargalg",
-		.owner = THIS_MODULE,
-	},
-};
-
-static int __init abx500_chargalg_init(void)
-{
-	return platform_driver_register(&abx500_chargalg_driver);
-}
-
-static void __exit abx500_chargalg_exit(void)
-{
-	platform_driver_unregister(&abx500_chargalg_driver);
-}
-
-module_init(abx500_chargalg_init);
-module_exit(abx500_chargalg_exit);
-
-MODULE_LICENSE("GPL v2");
-MODULE_AUTHOR("Johan Palsson, Karl Komierowski");
-MODULE_ALIAS("platform:abx500-chargalg");
-MODULE_DESCRIPTION("abx500 battery charging algorithm");
-- 
cgit