From 871480933a1c28f8a9fed4c4d34d06c439a7a422 Mon Sep 17 00:00:00 2001
From: Srikant Patnaik
Date: Sun, 11 Jan 2015 12:28:04 +0530
Subject: Moved, renamed, and deleted files

The original directory structure was scattered and unorganized.
Changes are basically to make it look like kernel structure.
---
 .../arch/mn10300/unit-asb2364/unit-init.c          | 132 ---------------------
 1 file changed, 132 deletions(-)
 delete mode 100644 ANDROID_3.4.5/arch/mn10300/unit-asb2364/unit-init.c

(limited to 'ANDROID_3.4.5/arch/mn10300/unit-asb2364/unit-init.c')

diff --git a/ANDROID_3.4.5/arch/mn10300/unit-asb2364/unit-init.c b/ANDROID_3.4.5/arch/mn10300/unit-asb2364/unit-init.c
deleted file mode 100644
index 6359b41c..00000000
--- a/ANDROID_3.4.5/arch/mn10300/unit-asb2364/unit-init.c
+++ /dev/null
@@ -1,132 +0,0 @@
-/* ASB2364 initialisation
- *
- * Copyright (C) 2002 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/delay.h>
-
-#include <asm/io.h>
-#include <asm/setup.h>
-#include <asm/processor.h>
-#include <asm/irq.h>
-#include <asm/intctl-regs.h>
-#include <asm/serial-regs.h>
-#include <unit/fpga-regs.h>
-#include <unit/serial.h>
-#include <unit/smsc911x.h>
-
-#define TTYS0_SERIAL_IER	__SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_IER * 2, u8)
-#define LAN_IRQ_CFG		__SYSREG(SMSC911X_BASE + 0x54, u32)
-#define LAN_INT_EN		__SYSREG(SMSC911X_BASE + 0x5c, u32)
-
-/*
- * initialise some of the unit hardware before gdbstub is set up
- */
-asmlinkage void __init unit_init(void)
-{
-	/* Make sure we aren't going to get unexpected interrupts */
-	TTYS0_SERIAL_IER = 0;
-	SC0RXICR = 0;
-	SC0TXICR = 0;
-	SC1RXICR = 0;
-	SC1TXICR = 0;
-	SC2RXICR = 0;
-	SC2TXICR = 0;
-
-	/* Attempt to reset the FPGA attached peripherals */
-	ASB2364_FPGA_REG_RESET_LAN = 0x0000;
-	SyncExBus();
-	ASB2364_FPGA_REG_RESET_UART = 0x0000;
-	SyncExBus();
-	ASB2364_FPGA_REG_RESET_I2C = 0x0000;
-	SyncExBus();
-	ASB2364_FPGA_REG_RESET_USB = 0x0000;
-	SyncExBus();
-	ASB2364_FPGA_REG_RESET_AV = 0x0000;
-	SyncExBus();
-
-	/* set up the external interrupts */
-
-	/* XIRQ[0]: NAND RXBY */
-	/* SET_XIRQ_TRIGGER(0, XIRQ_TRIGGER_LOWLEVEL); */
-
-	/* XIRQ[1]: LAN, UART, I2C, USB, PCI, FPGA */
-	SET_XIRQ_TRIGGER(1, XIRQ_TRIGGER_LOWLEVEL);
-
-	/* XIRQ[2]: Extend Slot 1-9 */
-	/* SET_XIRQ_TRIGGER(2, XIRQ_TRIGGER_LOWLEVEL); */
-
-#if defined(CONFIG_EXT_SERIAL_IRQ_LEVEL) &&	\
-    defined(CONFIG_ETHERNET_IRQ_LEVEL) &&	\
-    (CONFIG_EXT_SERIAL_IRQ_LEVEL != CONFIG_ETHERNET_IRQ_LEVEL)
-# error CONFIG_EXT_SERIAL_IRQ_LEVEL != CONFIG_ETHERNET_IRQ_LEVEL
-#endif
-
-#if defined(CONFIG_EXT_SERIAL_IRQ_LEVEL)
-	set_intr_level(XIRQ1, NUM2GxICR_LEVEL(CONFIG_EXT_SERIAL_IRQ_LEVEL));
-#elif defined(CONFIG_ETHERNET_IRQ_LEVEL)
-	set_intr_level(XIRQ1, NUM2GxICR_LEVEL(CONFIG_ETHERNET_IRQ_LEVEL));
-#endif
-}
-
-/*
- * initialise the rest of the unit hardware after gdbstub is ready
- */
-asmlinkage void __init unit_setup(void)
-{
-	/* Release the reset on the SMSC911X so that it is ready by the time we
-	 * need it */
-	ASB2364_FPGA_REG_RESET_LAN = 0x0001;
-	SyncExBus();
-	ASB2364_FPGA_REG_RESET_UART = 0x0001;
-	SyncExBus();
-	ASB2364_FPGA_REG_RESET_I2C = 0x0001;
-	SyncExBus();
-	ASB2364_FPGA_REG_RESET_USB = 0x0001;
-	SyncExBus();
-	ASB2364_FPGA_REG_RESET_AV = 0x0001;
-	SyncExBus();
-
-	/* Make sure the ethernet chipset isn't going to give us an interrupt
-	 * storm from stuff it was doing pre-reset */
-	LAN_IRQ_CFG = 0;
-	LAN_INT_EN = 0;
-}
-
-/*
- * initialise the external interrupts used by a unit of this type
- */
-void __init unit_init_IRQ(void)
-{
-	unsigned int extnum;
-
-	for (extnum = 0 ; extnum < NR_XIRQS ; extnum++) {
-		switch (GET_XIRQ_TRIGGER(extnum)) {
-			/* LEVEL triggered interrupts should be made
-			 * post-ACK'able as they hold their lines until
-			 * serviced
-			 */
-		case XIRQ_TRIGGER_HILEVEL:
-		case XIRQ_TRIGGER_LOWLEVEL:
-			mn10300_set_lateack_irq_type(XIRQ2IRQ(extnum));
-			break;
-		default:
-			break;
-		}
-	}
-
-#define IRQCTL	__SYSREG(0xd5000090, u32)
-	IRQCTL |= 0x02;
-
-	irq_fpga_init();
-}
-- 
cgit