From 871480933a1c28f8a9fed4c4d34d06c439a7a422 Mon Sep 17 00:00:00 2001
From: Srikant Patnaik
Date: Sun, 11 Jan 2015 12:28:04 +0530
Subject: Moved, renamed, and deleted files

The original directory structure was scattered and unorganized.
Changes are basically to make it look like kernel structure.
---
 ANDROID_3.4.5/arch/arm/mach-pxa/Kconfig            |  721 -----------
 ANDROID_3.4.5/arch/arm/mach-pxa/Makefile           |  106 --
 ANDROID_3.4.5/arch/arm/mach-pxa/Makefile.boot      |    2 -
 ANDROID_3.4.5/arch/arm/mach-pxa/am200epd.c         |  387 ------
 ANDROID_3.4.5/arch/arm/mach-pxa/am300epd.c         |  296 -----
 ANDROID_3.4.5/arch/arm/mach-pxa/balloon3.c         |  834 ------------
 ANDROID_3.4.5/arch/arm/mach-pxa/capc7117.c         |  159 ---
 ANDROID_3.4.5/arch/arm/mach-pxa/clock-pxa2xx.c     |   55 -
 ANDROID_3.4.5/arch/arm/mach-pxa/clock-pxa3xx.c     |  208 ---
 ANDROID_3.4.5/arch/arm/mach-pxa/clock.c            |   86 --
 ANDROID_3.4.5/arch/arm/mach-pxa/clock.h            |   80 --
 ANDROID_3.4.5/arch/arm/mach-pxa/cm-x255.c          |  236 ----
 ANDROID_3.4.5/arch/arm/mach-pxa/cm-x270.c          |  412 ------
 ANDROID_3.4.5/arch/arm/mach-pxa/cm-x2xx-pci.c      |  200 ---
 ANDROID_3.4.5/arch/arm/mach-pxa/cm-x2xx-pci.h      |   13 -
 ANDROID_3.4.5/arch/arm/mach-pxa/cm-x2xx.c          |  528 --------
 ANDROID_3.4.5/arch/arm/mach-pxa/cm-x300.c          |  863 -------------
 .../arch/arm/mach-pxa/colibri-evalboard.c          |  119 --
 .../arch/arm/mach-pxa/colibri-pxa270-income.c      |  223 ----
 ANDROID_3.4.5/arch/arm/mach-pxa/colibri-pxa270.c   |  330 -----
 ANDROID_3.4.5/arch/arm/mach-pxa/colibri-pxa300.c   |  195 ---
 ANDROID_3.4.5/arch/arm/mach-pxa/colibri-pxa320.c   |  265 ----
 ANDROID_3.4.5/arch/arm/mach-pxa/colibri-pxa3xx.c   |  153 ---
 ANDROID_3.4.5/arch/arm/mach-pxa/corgi.c            |  766 ------------
 ANDROID_3.4.5/arch/arm/mach-pxa/corgi_pm.c         |  231 ----
 ANDROID_3.4.5/arch/arm/mach-pxa/cpufreq-pxa2xx.c   |  494 --------
 ANDROID_3.4.5/arch/arm/mach-pxa/cpufreq-pxa3xx.c   |  258 ----
 ANDROID_3.4.5/arch/arm/mach-pxa/csb701.c           |   66 -
 ANDROID_3.4.5/arch/arm/mach-pxa/csb726.c           |  283 -----
 ANDROID_3.4.5/arch/arm/mach-pxa/devices.c          | 1118 -----------------
 ANDROID_3.4.5/arch/arm/mach-pxa/devices.h          |   49 -
 ANDROID_3.4.5/arch/arm/mach-pxa/em-x270.c          | 1321 --------------------
 ANDROID_3.4.5/arch/arm/mach-pxa/eseries.c          |  983 ---------------
 ANDROID_3.4.5/arch/arm/mach-pxa/eseries.h          |   14 -
 ANDROID_3.4.5/arch/arm/mach-pxa/ezx.c              | 1243 ------------------
 ANDROID_3.4.5/arch/arm/mach-pxa/generic.c          |   97 --
 ANDROID_3.4.5/arch/arm/mach-pxa/generic.h          |   60 -
 ANDROID_3.4.5/arch/arm/mach-pxa/gumstix.c          |  244 ----
 ANDROID_3.4.5/arch/arm/mach-pxa/h5000.c            |  214 ----
 ANDROID_3.4.5/arch/arm/mach-pxa/himalaya.c         |  169 ---
 ANDROID_3.4.5/arch/arm/mach-pxa/hx4700.c           |  895 -------------
 ANDROID_3.4.5/arch/arm/mach-pxa/icontrol.c         |  202 ---
 ANDROID_3.4.5/arch/arm/mach-pxa/idp.c              |  204 ---
 .../arch/arm/mach-pxa/include/mach/addr-map.h      |   48 -
 .../arch/arm/mach-pxa/include/mach/arcom-pcmcia.h  |   11 -
 .../arch/arm/mach-pxa/include/mach/audio.h         |   30 -
 .../arch/arm/mach-pxa/include/mach/balloon3.h      |  182 ---
 .../arch/arm/mach-pxa/include/mach/bitfield.h      |  113 --
 .../arch/arm/mach-pxa/include/mach/camera.h        |   44 -
 .../arch/arm/mach-pxa/include/mach/colibri.h       |   69 -
 .../arch/arm/mach-pxa/include/mach/corgi.h         |  113 --
 .../arch/arm/mach-pxa/include/mach/csb726.h        |   26 -
 .../arch/arm/mach-pxa/include/mach/debug-macro.S   |   23 -
 ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/dma.h |   21 -
 .../arch/arm/mach-pxa/include/mach/eseries-gpio.h  |   67 -
 .../arch/arm/mach-pxa/include/mach/eseries-irq.h   |   28 -
 .../arch/arm/mach-pxa/include/mach/gpio.h          |   32 -
 .../arch/arm/mach-pxa/include/mach/gumstix.h       |   91 --
 .../arch/arm/mach-pxa/include/mach/h5000.h         |  113 --
 .../arch/arm/mach-pxa/include/mach/hardware.h      |  338 -----
 .../arch/arm/mach-pxa/include/mach/hx4700.h        |  132 --
 ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/idp.h |  197 ---
 ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/io.h  |   17 -
 .../arch/arm/mach-pxa/include/mach/irda.h          |   25 -
 .../arch/arm/mach-pxa/include/mach/irqs.h          |  117 --
 .../arch/arm/mach-pxa/include/mach/littleton.h     |   13 -
 .../arch/arm/mach-pxa/include/mach/lpd270.h        |   43 -
 .../arch/arm/mach-pxa/include/mach/lubbock.h       |   53 -
 .../arch/arm/mach-pxa/include/mach/magician.h      |  120 --
 .../arch/arm/mach-pxa/include/mach/mainstone.h     |  141 ---
 .../arch/arm/mach-pxa/include/mach/mfp-pxa25x.h    |  225 ----
 .../arch/arm/mach-pxa/include/mach/mfp-pxa27x.h    |  467 -------
 .../arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h    |  142 ---
 .../arch/arm/mach-pxa/include/mach/mfp-pxa300.h    |  575 ---------
 .../arch/arm/mach-pxa/include/mach/mfp-pxa320.h    |  461 -------
 .../arch/arm/mach-pxa/include/mach/mfp-pxa3xx.h    |  158 ---
 .../arch/arm/mach-pxa/include/mach/mfp-pxa930.h    |  498 --------
 ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/mfp.h |   21 -
 .../arch/arm/mach-pxa/include/mach/mioa701.h       |   72 --
 ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/mmc.h |   28 -
 .../arch/arm/mach-pxa/include/mach/mtd-xip.h       |   35 -
 .../arch/arm/mach-pxa/include/mach/mxm8x10.h       |   21 -
 .../arch/arm/mach-pxa/include/mach/ohci.h          |   36 -
 .../arch/arm/mach-pxa/include/mach/palm27x.h       |   81 --
 .../arch/arm/mach-pxa/include/mach/palmasoc.h      |    8 -
 .../arch/arm/mach-pxa/include/mach/palmld.h        |  109 --
 .../arch/arm/mach-pxa/include/mach/palmt5.h        |   84 --
 .../arch/arm/mach-pxa/include/mach/palmtc.h        |   86 --
 .../arch/arm/mach-pxa/include/mach/palmte2.h       |   68 -
 .../arch/arm/mach-pxa/include/mach/palmtreo.h      |   67 -
 .../arch/arm/mach-pxa/include/mach/palmtx.h        |  112 --
 .../arch/arm/mach-pxa/include/mach/palmz72.h       |   84 --
 .../arch/arm/mach-pxa/include/mach/pata_pxa.h      |   33 -
 .../arch/arm/mach-pxa/include/mach/pcm027.h        |   84 --
 .../arm/mach-pxa/include/mach/pcm990_baseboard.h   |  275 ----
 ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pm.h  |   40 -
 .../arch/arm/mach-pxa/include/mach/poodle.h        |   92 --
 .../arch/arm/mach-pxa/include/mach/pxa25x-udc.h    |  163 ---
 .../arch/arm/mach-pxa/include/mach/pxa25x.h        |   17 -
 .../arch/arm/mach-pxa/include/mach/pxa27x-udc.h    |  257 ----
 .../arch/arm/mach-pxa/include/mach/pxa27x.h        |   29 -
 .../arch/arm/mach-pxa/include/mach/pxa2xx-regs.h   |  187 ---
 .../arch/arm/mach-pxa/include/mach/pxa300.h        |    7 -
 .../arch/arm/mach-pxa/include/mach/pxa320.h        |    8 -
 .../arch/arm/mach-pxa/include/mach/pxa3xx-regs.h   |  205 ---
 .../arch/arm/mach-pxa/include/mach/pxa3xx-u2d.h    |   35 -
 .../arch/arm/mach-pxa/include/mach/pxa3xx.h        |   14 -
 .../arch/arm/mach-pxa/include/mach/pxa930.h        |    7 -
 .../arch/arm/mach-pxa/include/mach/pxa930_rotary.h |   20 -
 .../arm/mach-pxa/include/mach/pxa930_trkball.h     |   10 -
 .../arch/arm/mach-pxa/include/mach/pxa95x.h        |    7 -
 .../arch/arm/mach-pxa/include/mach/pxafb.h         |  175 ---
 .../arch/arm/mach-pxa/include/mach/regs-ac97.h     |  101 --
 .../arch/arm/mach-pxa/include/mach/regs-lcd.h      |  197 ---
 .../arch/arm/mach-pxa/include/mach/regs-ost.h      |   34 -
 .../arch/arm/mach-pxa/include/mach/regs-rtc.h      |   23 -
 .../arch/arm/mach-pxa/include/mach/regs-u2d.h      |  200 ---
 .../arch/arm/mach-pxa/include/mach/regs-uart.h     |  143 ---
 .../arch/arm/mach-pxa/include/mach/reset.h         |   21 -
 .../arch/arm/mach-pxa/include/mach/sharpsl_pm.h    |  113 --
 .../arch/arm/mach-pxa/include/mach/smemc.h         |   74 --
 .../arch/arm/mach-pxa/include/mach/spitz.h         |  189 ---
 .../arch/arm/mach-pxa/include/mach/timex.h         |   34 -
 .../arch/arm/mach-pxa/include/mach/tosa.h          |  200 ---
 .../arch/arm/mach-pxa/include/mach/tosa_bt.h       |   22 -
 .../arch/arm/mach-pxa/include/mach/trizeps4.h      |  162 ---
 ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/udc.h |    8 -
 .../arch/arm/mach-pxa/include/mach/uncompress.h    |   79 --
 .../arch/arm/mach-pxa/include/mach/viper.h         |   94 --
 .../arch/arm/mach-pxa/include/mach/vpac270.h       |   42 -
 ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/z2.h  |   40 -
 .../arch/arm/mach-pxa/include/mach/zeus.h          |   85 --
 .../arch/arm/mach-pxa/include/mach/zylonite.h      |   42 -
 ANDROID_3.4.5/arch/arm/mach-pxa/irq.c              |  204 ---
 ANDROID_3.4.5/arch/arm/mach-pxa/leds-idp.c         |  115 --
 ANDROID_3.4.5/arch/arm/mach-pxa/leds-lubbock.c     |  124 --
 ANDROID_3.4.5/arch/arm/mach-pxa/leds-mainstone.c   |  119 --
 ANDROID_3.4.5/arch/arm/mach-pxa/leds.c             |   32 -
 ANDROID_3.4.5/arch/arm/mach-pxa/leds.h             |   13 -
 ANDROID_3.4.5/arch/arm/mach-pxa/littleton.c        |  449 -------
 ANDROID_3.4.5/arch/arm/mach-pxa/lpd270.c           |  509 --------
 ANDROID_3.4.5/arch/arm/mach-pxa/lubbock.c          |  561 ---------
 ANDROID_3.4.5/arch/arm/mach-pxa/magician.c         |  784 ------------
 ANDROID_3.4.5/arch/arm/mach-pxa/mainstone.c        |  626 ----------
 ANDROID_3.4.5/arch/arm/mach-pxa/mfp-pxa2xx.c       |  441 -------
 ANDROID_3.4.5/arch/arm/mach-pxa/mfp-pxa3xx.c       |   59 -
 ANDROID_3.4.5/arch/arm/mach-pxa/mioa701.c          |  767 ------------
 .../arch/arm/mach-pxa/mioa701_bootresume.S         |   37 -
 ANDROID_3.4.5/arch/arm/mach-pxa/mp900.c            |  104 --
 ANDROID_3.4.5/arch/arm/mach-pxa/mxm8x10.c          |  475 -------
 ANDROID_3.4.5/arch/arm/mach-pxa/palm27x.c          |  479 -------
 ANDROID_3.4.5/arch/arm/mach-pxa/palmld.c           |  353 ------
 ANDROID_3.4.5/arch/arm/mach-pxa/palmt5.c           |  214 ----
 ANDROID_3.4.5/arch/arm/mach-pxa/palmtc.c           |  548 --------
 ANDROID_3.4.5/arch/arm/mach-pxa/palmte2.c          |  367 ------
 ANDROID_3.4.5/arch/arm/mach-pxa/palmtreo.c         |  472 -------
 ANDROID_3.4.5/arch/arm/mach-pxa/palmtx.c           |  375 ------
 ANDROID_3.4.5/arch/arm/mach-pxa/palmz72.c          |  410 ------
 ANDROID_3.4.5/arch/arm/mach-pxa/pcm027.c           |  269 ----
 ANDROID_3.4.5/arch/arm/mach-pxa/pcm990-baseboard.c |  541 --------
 ANDROID_3.4.5/arch/arm/mach-pxa/pm.c               |  118 --
 ANDROID_3.4.5/arch/arm/mach-pxa/poodle.c           |  475 -------
 ANDROID_3.4.5/arch/arm/mach-pxa/pxa25x.c           |  386 ------
 ANDROID_3.4.5/arch/arm/mach-pxa/pxa27x.c           |  471 -------
 ANDROID_3.4.5/arch/arm/mach-pxa/pxa2xx.c           |   56 -
 ANDROID_3.4.5/arch/arm/mach-pxa/pxa300.c           |  117 --
 ANDROID_3.4.5/arch/arm/mach-pxa/pxa320.c           |  100 --
 ANDROID_3.4.5/arch/arm/mach-pxa/pxa3xx-ulpi.c      |  402 ------
 ANDROID_3.4.5/arch/arm/mach-pxa/pxa3xx.c           |  475 -------
 ANDROID_3.4.5/arch/arm/mach-pxa/pxa930.c           |  206 ---
 ANDROID_3.4.5/arch/arm/mach-pxa/pxa95x.c           |  295 -----
 ANDROID_3.4.5/arch/arm/mach-pxa/raumfeld.c         | 1127 -----------------
 ANDROID_3.4.5/arch/arm/mach-pxa/reset.c            |  106 --
 ANDROID_3.4.5/arch/arm/mach-pxa/saar.c             |  607 ---------
 ANDROID_3.4.5/arch/arm/mach-pxa/saarb.c            |  115 --
 ANDROID_3.4.5/arch/arm/mach-pxa/sharpsl_pm.c       |  999 ---------------
 ANDROID_3.4.5/arch/arm/mach-pxa/sleep.S            |  171 ---
 ANDROID_3.4.5/arch/arm/mach-pxa/smemc.c            |   58 -
 ANDROID_3.4.5/arch/arm/mach-pxa/spitz.c            | 1022 ---------------
 ANDROID_3.4.5/arch/arm/mach-pxa/spitz_pm.c         |  266 ----
 ANDROID_3.4.5/arch/arm/mach-pxa/standby.S          |  114 --
 ANDROID_3.4.5/arch/arm/mach-pxa/stargate2.c        | 1030 ---------------
 ANDROID_3.4.5/arch/arm/mach-pxa/tavorevb.c         |  500 --------
 ANDROID_3.4.5/arch/arm/mach-pxa/tavorevb3.c        |  136 --
 ANDROID_3.4.5/arch/arm/mach-pxa/time.c             |  170 ---
 ANDROID_3.4.5/arch/arm/mach-pxa/tosa-bt.c          |  148 ---
 ANDROID_3.4.5/arch/arm/mach-pxa/tosa.c             |  987 ---------------
 ANDROID_3.4.5/arch/arm/mach-pxa/trizeps4.c         |  578 ---------
 ANDROID_3.4.5/arch/arm/mach-pxa/viper.c            | 1004 ---------------
 ANDROID_3.4.5/arch/arm/mach-pxa/vpac270.c          |  727 -----------
 ANDROID_3.4.5/arch/arm/mach-pxa/xcep.c             |  191 ---
 ANDROID_3.4.5/arch/arm/mach-pxa/z2.c               |  730 -----------
 ANDROID_3.4.5/arch/arm/mach-pxa/zeus.c             |  917 --------------
 ANDROID_3.4.5/arch/arm/mach-pxa/zylonite.c         |  434 -------
 ANDROID_3.4.5/arch/arm/mach-pxa/zylonite_pxa300.c  |  280 -----
 ANDROID_3.4.5/arch/arm/mach-pxa/zylonite_pxa320.c  |  215 ----
 196 files changed, 49775 deletions(-)
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/Kconfig
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/Makefile
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/Makefile.boot
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/am200epd.c
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/am300epd.c
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/balloon3.c
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/capc7117.c
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/clock-pxa2xx.c
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/clock-pxa3xx.c
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/clock.c
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/clock.h
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/cm-x255.c
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/cm-x270.c
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/cm-x2xx-pci.c
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/cm-x2xx-pci.h
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/cm-x2xx.c
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/cm-x300.c
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/colibri-evalboard.c
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/colibri-pxa270-income.c
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/colibri-pxa270.c
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/colibri-pxa300.c
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/colibri-pxa320.c
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/colibri-pxa3xx.c
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/corgi.c
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/corgi_pm.c
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/cpufreq-pxa2xx.c
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/cpufreq-pxa3xx.c
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/csb701.c
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/csb726.c
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/devices.c
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/devices.h
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/em-x270.c
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/eseries.c
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/eseries.h
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/ezx.c
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/generic.c
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/generic.h
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/gumstix.c
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/h5000.c
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/himalaya.c
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/hx4700.c
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/icontrol.c
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/idp.c
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/addr-map.h
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/arcom-pcmcia.h
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/audio.h
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/balloon3.h
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/bitfield.h
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/camera.h
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/colibri.h
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/corgi.h
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/csb726.h
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/debug-macro.S
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/dma.h
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/eseries-gpio.h
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/eseries-irq.h
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/gpio.h
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/gumstix.h
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/h5000.h
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/hardware.h
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/hx4700.h
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/idp.h
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/io.h
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/irda.h
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/irqs.h
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/littleton.h
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/lpd270.h
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/lubbock.h
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/magician.h
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/mainstone.h
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/mfp-pxa300.h
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/mfp-pxa320.h
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/mfp-pxa3xx.h
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/mfp-pxa930.h
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/mfp.h
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/mioa701.h
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/mmc.h
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/mtd-xip.h
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/mxm8x10.h
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/ohci.h
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/palm27x.h
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/palmasoc.h
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/palmld.h
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/palmt5.h
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/palmtc.h
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/palmte2.h
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/palmtreo.h
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/palmtx.h
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/palmz72.h
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pata_pxa.h
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pcm027.h
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pcm990_baseboard.h
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pm.h
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/poodle.h
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pxa25x-udc.h
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pxa25x.h
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pxa27x-udc.h
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pxa27x.h
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pxa300.h
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pxa320.h
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pxa3xx-u2d.h
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pxa3xx.h
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pxa930.h
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pxa930_rotary.h
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pxa930_trkball.h
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pxa95x.h
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pxafb.h
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/regs-ac97.h
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/regs-lcd.h
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/regs-ost.h
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/regs-rtc.h
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/regs-u2d.h
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/regs-uart.h
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/reset.h
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/sharpsl_pm.h
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/smemc.h
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/spitz.h
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/timex.h
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/tosa.h
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/tosa_bt.h
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/trizeps4.h
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/udc.h
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/uncompress.h
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/viper.h
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/vpac270.h
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/z2.h
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/zeus.h
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/zylonite.h
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/irq.c
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/leds-idp.c
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/leds-lubbock.c
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/leds-mainstone.c
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/leds.c
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/leds.h
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/littleton.c
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/lpd270.c
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/lubbock.c
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/magician.c
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/mainstone.c
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/mfp-pxa2xx.c
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/mfp-pxa3xx.c
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/mioa701.c
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/mioa701_bootresume.S
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/mp900.c
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/mxm8x10.c
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/palm27x.c
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/palmld.c
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/palmt5.c
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/palmtc.c
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/palmte2.c
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/palmtreo.c
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/palmtx.c
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/palmz72.c
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/pcm027.c
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/pcm990-baseboard.c
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/pm.c
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/poodle.c
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/pxa25x.c
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/pxa27x.c
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/pxa2xx.c
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/pxa300.c
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/pxa320.c
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/pxa3xx-ulpi.c
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/pxa3xx.c
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/pxa930.c
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/pxa95x.c
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/raumfeld.c
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/reset.c
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/saar.c
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/saarb.c
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/sharpsl_pm.c
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/sleep.S
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/smemc.c
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/spitz.c
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/spitz_pm.c
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/standby.S
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/stargate2.c
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/tavorevb.c
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/tavorevb3.c
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/time.c
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/tosa-bt.c
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/tosa.c
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/trizeps4.c
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/viper.c
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/vpac270.c
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/xcep.c
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/z2.c
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/zeus.c
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/zylonite.c
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/zylonite_pxa300.c
 delete mode 100644 ANDROID_3.4.5/arch/arm/mach-pxa/zylonite_pxa320.c

(limited to 'ANDROID_3.4.5/arch/arm/mach-pxa')

diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/Kconfig b/ANDROID_3.4.5/arch/arm/mach-pxa/Kconfig
deleted file mode 100644
index fe2d1f80..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/Kconfig
+++ /dev/null
@@ -1,721 +0,0 @@
-if ARCH_PXA
-
-menu "Intel PXA2xx/PXA3xx Implementations"
-
-config ARCH_PXA_V7
-	bool "ARMv7 (PXA95x) based systems"
-
-if ARCH_PXA_V7
-comment "Marvell Dev Platforms (sorted by hardware release time)"
-config MACH_TAVOREVB3
-	bool "PXA95x Development Platform (aka TavorEVB III)"
-	select CPU_PXA955
-
-config MACH_SAARB
-	bool "PXA955 Handheld Platform (aka SAARB)"
-	select CPU_PXA955
-endif
-
-config PXA_V7_MACH_AUTO
-	def_bool y
-	depends on ARCH_PXA_V7
-	depends on !MACH_SAARB
-	select MACH_TAVOREVB3
-
-if !ARCH_PXA_V7
-comment "Intel/Marvell Dev Platforms (sorted by hardware release time)"
-
-config ARCH_LUBBOCK
-	bool "Intel DBPXA250 Development Platform (aka Lubbock)"
-	select PXA25x
-	select SA1111
-
-config MACH_MAINSTONE
-	bool "Intel HCDDBBVA0 Development Platform (aka Mainstone)"
-	select PXA27x
-	select HAVE_PWM
-
-config MACH_ZYLONITE
-	bool
-	select PXA3xx
-	select HAVE_PWM
-
-config MACH_ZYLONITE300
-	bool "PXA3xx Development Platform (aka Zylonite) PXA300/310"
-	select CPU_PXA300
-	select CPU_PXA310
-	select MACH_ZYLONITE
-
-config MACH_ZYLONITE320
-	bool "PXA3xx Development Platform (aka Zylonite) PXA320"
-	select CPU_PXA320
-	select MACH_ZYLONITE
-
-config MACH_LITTLETON
-	bool "PXA3xx Form Factor Platform (aka Littleton)"
-	select PXA3xx
-	select CPU_PXA300
-	select CPU_PXA310
-
-config MACH_TAVOREVB
-	bool "PXA930 Evaluation Board (aka TavorEVB)"
-	select PXA3xx
-	select CPU_PXA930
-
-config MACH_SAAR
-	bool "PXA930 Handheld Platform (aka SAAR)"
-	select PXA3xx
-	select CPU_PXA930
-
-comment "Third Party Dev Platforms (sorted by vendor name)"
-
-config ARCH_PXA_IDP
-	bool "Accelent Xscale IDP"
-	select PXA25x
-
-config ARCH_VIPER
-	bool "Arcom/Eurotech VIPER SBC"
-	select PXA25x
-	select ISA
-	select I2C_GPIO
-	select HAVE_PWM
-	select PXA_HAVE_ISA_IRQS
-	select ARCOM_PCMCIA
-
-config MACH_ARCOM_ZEUS
-	bool "Arcom/Eurotech ZEUS SBC"
-	select PXA27x
-	select ISA
-	select PXA_HAVE_ISA_IRQS
-	select ARCOM_PCMCIA
-
-config MACH_BALLOON3
-	bool "Balloon 3 board"
-	select PXA27x
-	select IWMMXT
-
-config MACH_CSB726
-	bool "Enable Cogent CSB726 System On a Module"
-	select PXA27x
-	select IWMMXT
-	help
-	  Say Y here if you intend to run this kernel on a Cogent
-	  CSB726 System On Module.
-
-config CSB726_CSB701
-	bool "Enable support for CSB701 baseboard"
-	depends on MACH_CSB726
-
-config MACH_ARMCORE
-	bool "CompuLab CM-X255/CM-X270 modules"
-	select ARCH_HAS_DMA_SET_COHERENT_MASK if PCI
-	select PXA27x
-	select IWMMXT
-	select PXA25x
-	select MIGHT_HAVE_PCI
-	select NEED_MACH_IO_H if PCI
-
-config MACH_EM_X270
-	bool "CompuLab EM-x270 platform"
-	select PXA27x
-
-config MACH_EXEDA
-	bool "CompuLab eXeda platform"
-	select PXA27x
-
-config MACH_CM_X300
-	bool "CompuLab CM-X300 modules"
-	select PXA3xx
-	select CPU_PXA300
-	select CPU_PXA310
-	select HAVE_PWM
-
-config MACH_CAPC7117
-	bool "Embedian CAPC-7117 evaluation kit based on the MXM-8x10 CoM"
-	select CPU_PXA320
-	select PXA3xx
-
-config ARCH_GUMSTIX
-	bool "Gumstix XScale 255 boards"
-	select PXA25x
-	help
-	  Say Y here if you intend to run this kernel on
-	  Basix, Connex, ws-200ax, ws-400ax systems
-
-choice
-	prompt "Gumstix Carrier/Expansion Board"
-	depends on ARCH_GUMSTIX
-
-config GUMSTIX_AM200EPD
-	bool "Enable AM200EPD board support"
-
-config GUMSTIX_AM300EPD
-	bool "Enable AM300EPD board support"
-
-endchoice
-
-config MACH_INTELMOTE2
-	bool "Intel Mote 2 Platform"
-	select PXA27x
-	select IWMMXT
-
-config MACH_STARGATE2
-	bool "Intel Stargate 2 Platform"
-	select PXA27x
-	select IWMMXT
-
-config MACH_XCEP
-	bool "Iskratel Electronics XCEP"
-	select PXA25x
-	select MTD
-	select MTD_PHYSMAP
-	select MTD_CFI_INTELEXT
-	select MTD_CFI
-	select MTD_CHAR
-	select SMC91X
-	help
-	  PXA255 based Single Board Computer with SMC 91C111 ethernet chip and 64 MB of flash.
-	  Tuned for usage in Libera instruments for particle accelerators.
-
-config TRIZEPS_PXA
-	bool "PXA based Keith und Koep Trizeps DIMM-Modules"
-
-config MACH_TRIZEPS4
-	bool "Keith und Koep Trizeps4 DIMM-Module"
-	depends on TRIZEPS_PXA
-	select TRIZEPS_PCMCIA
-	select PXA27x
-
-config MACH_TRIZEPS4WL
-	bool "Keith und Koep Trizeps4-WL DIMM-Module"
-	depends on TRIZEPS_PXA
-	select TRIZEPS_PCMCIA
-	select PXA27x
-
-choice
-	prompt "Select base board for Trizeps module"
-	depends on TRIZEPS_PXA
-
-config MACH_TRIZEPS_CONXS
-	bool "ConXS Eval Board"
-
-config MACH_TRIZEPS_UCONXS
-	bool "uConXS Eval Board"
-
-config MACH_TRIZEPS_ANY
-	bool "another Board"
-
-endchoice
-
-config ARCOM_PCMCIA
-	bool
-	help
-	  Generic option for Arcom Viper/Zeus PCMCIA
-
-config TRIZEPS_PCMCIA
-	bool
-	help
-	  Enable PCMCIA support for Trizeps modules
-
-config MACH_LOGICPD_PXA270
-	bool "LogicPD PXA270 Card Engine Development Platform"
-	select PXA27x
-	select HAVE_PWM
-
-config MACH_PCM027
-	bool "Phytec phyCORE-PXA270 CPU module (PCM-027)"
-	select PXA27x
-	select IWMMXT
-
-config MACH_PCM990_BASEBOARD
-	bool "PHYTEC PCM-990 development board"
-	select HAVE_PWM
-	depends on MACH_PCM027
-
-choice
-	prompt "display on pcm990"
-	depends on MACH_PCM990_BASEBOARD
-
-config PCM990_DISPLAY_SHARP
-	bool "sharp lq084v1dg21 stn display"
-
-config PCM990_DISPLAY_NEC
-	bool "nec nl6448bc20_18d tft display"
-
-config PCM990_DISPLAY_NONE
-	bool "no display"
-
-endchoice
-
-config MACH_COLIBRI
-	bool "Toradex Colibri PXA270"
-	select PXA27x
-
-config MACH_COLIBRI_PXA270_INCOME
-	bool "Income s.r.o. PXA270 SBC"
-	depends on MACH_COLIBRI
-	select PXA27x
-	select HAVE_PWM
-
-config MACH_COLIBRI300
-	bool "Toradex Colibri PXA300/310"
-	select PXA3xx
-	select CPU_PXA300
-	select CPU_PXA310
-
-config MACH_COLIBRI320
-	bool "Toradex Colibri PXA320"
-	select PXA3xx
-	select CPU_PXA320
-
-config MACH_COLIBRI_EVALBOARD
-	bool "Toradex Colibri Evaluation Carrier Board support"
-	depends on MACH_COLIBRI || MACH_COLIBRI300 || MACH_COLIBRI320
-
-config MACH_VPAC270
-	bool "Voipac PXA270"
-	select PXA27x
-	select HAVE_PATA_PLATFORM
-	help
-	  PXA270 based Single Board Computer.
-
-comment "End-user Products (sorted by vendor name)"
-
-config MACH_H4700
-	bool "HP iPAQ hx4700"
-	select PXA27x
-	select IWMMXT
-	select HAVE_PWM
-
-config MACH_H5000
-	bool "HP iPAQ h5000"
-	select PXA25x
-
-config MACH_HIMALAYA
-	bool "HTC Himalaya Support"
-	select CPU_PXA26x
-
-config MACH_MAGICIAN
-	bool "Enable HTC Magician Support"
-	select PXA27x
-	select IWMMXT
-	select HAVE_PWM
-
-config MACH_MIOA701
-	bool "Mitac Mio A701 Support"
-	select PXA27x
-	select IWMMXT
-	select HAVE_PWM
-	select GPIO_SYSFS
-	help
-	  Say Y here if you intend to run this kernel on a
-	  MIO A701. Currently there is only basic support
-	  for this PDA.
-
-config PXA_EZX
-	bool "Motorola EZX Platform"
-	select PXA27x
-	select IWMMXT
-	select HAVE_PWM
-
-config MACH_EZX_A780
-	bool "Motorola EZX A780"
-	default y
-	depends on PXA_EZX
-
-config MACH_EZX_E680
-	bool "Motorola EZX E680"
-	default y
-	depends on PXA_EZX
-
-config MACH_EZX_A1200
-	bool "Motorola EZX A1200"
-	default y
-	depends on PXA_EZX
-
-config MACH_EZX_A910
-	bool "Motorola EZX A910"
-	default y
-	depends on PXA_EZX
-
-config MACH_EZX_E6
-	bool "Motorola EZX E6"
-	default y
-	depends on PXA_EZX
-
-config MACH_EZX_E2
-	bool "Motorola EZX E2"
-	default y
-	depends on PXA_EZX
-
-config MACH_MP900C
-	bool "Nec Mobilepro 900/c"
-	select PXA25x
-
-config ARCH_PXA_PALM
-	bool "PXA based Palm PDAs"
-	select HAVE_PWM
-
-config MACH_PALM27X
-	bool
-
-config MACH_PALMTE2
-	bool "Palm Tungsten|E2"
-	default y
-	depends on ARCH_PXA_PALM
-	select PXA25x
-	help
-	  Say Y here if you intend to run this kernel on a Palm Tungsten|E2
-	  handheld computer.
-
-config MACH_PALMTC
-	bool "Palm Tungsten|C"
-	default y
-	depends on ARCH_PXA_PALM
-	select PXA25x
-	help
-	  Say Y here if you intend to run this kernel on a Palm Tungsten|C
-	  handheld computer.
-
-config MACH_PALMT5
-	bool "Palm Tungsten|T5"
-	default y
-	depends on ARCH_PXA_PALM
-	select PXA27x
-	select IWMMXT
-	select MACH_PALM27X
-	help
-	  Say Y here if you intend to run this kernel on a Palm Tungsten|T5
-	  handheld computer.
-
-config MACH_PALMTX
-	bool "Palm T|X"
-	default y
-	depends on ARCH_PXA_PALM
-	select PXA27x
-	select IWMMXT
-	select MACH_PALM27X
-	help
-	  Say Y here if you intend to run this kernel on a Palm T|X
-	  handheld computer.
-
-config MACH_PALMZ72
-	bool "Palm Zire 72"
-	default y
-	depends on ARCH_PXA_PALM
-	select PXA27x
-	select IWMMXT
-	select MACH_PALM27X
-	help
-	  Say Y here if you intend to run this kernel on Palm Zire 72
-	  handheld computer.
-
-config MACH_PALMLD
-	bool "Palm LifeDrive"
-	default y
-	depends on ARCH_PXA_PALM
-	select PXA27x
-	select IWMMXT
-	select MACH_PALM27X
-	help
-	  Say Y here if you intend to run this kernel on a Palm LifeDrive
-	  handheld computer.
-
-config PALM_TREO
-	bool
-	depends on ARCH_PXA_PALM
-
-config MACH_CENTRO
-	bool "Palm Centro 685 (GSM)"
-	default y
-	depends on ARCH_PXA_PALM
-	select MACH_PALM27X
-	select PXA27x
-	select IWMMXT
-	select PALM_TREO
-	help
-	  Say Y here if you intend to run this kernel on Palm Centro 685 (GSM)
-	  smartphone.
-
-config MACH_TREO680
-	bool "Palm Treo 680"
-	default y
-	depends on ARCH_PXA_PALM
-	select MACH_PALM27X
-	select PXA27x
-	select IWMMXT
-	select PALM_TREO
-	help
-	  Say Y here if you intend to run this kernel on Palm Treo 680
-	  smartphone.
-
-config MACH_RAUMFELD_RC
-	bool "Raumfeld Controller"
-	select PXA3xx
-	select CPU_PXA300
-	select POWER_SUPPLY
-	select HAVE_PWM
-
-config MACH_RAUMFELD_CONNECTOR
-	bool "Raumfeld Connector"
-	select POWER_SUPPLY
-	select PXA3xx
-	select CPU_PXA300
-
-config MACH_RAUMFELD_SPEAKER
-	bool "Raumfeld Speaker"
-	select POWER_SUPPLY
-	select PXA3xx
-	select CPU_PXA300
-
-config PXA_SHARPSL
-	bool "SHARP Zaurus SL-5600, SL-C7xx and SL-Cxx00 Models"
-	select SHARP_SCOOP
-	select SHARP_PARAM
-	help
-	  Say Y here if you intend to run this kernel on a
-	  Sharp Zaurus SL-5600 (Poodle), SL-C700 (Corgi),
-	  SL-C750 (Shepherd), SL-C760 (Husky), SL-C1000 (Akita),
-	  SL-C3000 (Spitz), SL-C3100 (Borzoi) or SL-C6000x (Tosa)
-	  handheld computer.
-
-config PXA_SHARPSL_DETECT_MACH_ID
-	bool "Detect machine ID at run-time in the decompressor"
-	depends on PXA_SHARPSL
-	help
-	  Say Y here if you want the zImage decompressor to detect
-	  the Zaurus machine ID at run-time. For latest kexec-based
-	  boot loader, this is not necessary.
-
-config MACH_POODLE
-	bool "Enable Sharp SL-5600 (Poodle) Support"
-	depends on PXA_SHARPSL
-	select PXA25x
-	select SHARP_LOCOMO
-
-config MACH_CORGI
-	bool "Enable Sharp SL-C700 (Corgi) Support"
-	depends on PXA_SHARPSL
-	select PXA25x
-	select PXA_SHARP_C7xx
-
-config MACH_SHEPHERD
-	bool "Enable Sharp SL-C750 (Shepherd) Support"
-	depends on PXA_SHARPSL
-	select PXA25x
-	select PXA_SHARP_C7xx
-
-config MACH_HUSKY
-	bool "Enable Sharp SL-C760 (Husky) Support"
-	depends on PXA_SHARPSL
-	select PXA25x
-	select PXA_SHARP_C7xx
-
-config MACH_AKITA
-	bool "Enable Sharp SL-1000 (Akita) Support"
-	depends on PXA_SHARPSL
-	select PXA27x
-	select PXA_SHARP_Cxx00
-	select MACH_SPITZ
-	select I2C
-	select I2C_PXA
-
-config MACH_SPITZ
-	bool "Enable Sharp Zaurus SL-3000 (Spitz) Support"
-	depends on PXA_SHARPSL
-	select PXA27x
-	select PXA_SHARP_Cxx00
-
-config MACH_BORZOI
-	bool "Enable Sharp Zaurus SL-3100 (Borzoi) Support"
-	depends on PXA_SHARPSL
-	select PXA27x
-	select PXA_SHARP_Cxx00
-
-config MACH_TOSA
-	bool "Enable Sharp SL-6000x (Tosa) Support"
-	depends on PXA_SHARPSL
-	select PXA25x
-
-config TOSA_BT
-	tristate "Control the state of built-in bluetooth chip on Sharp SL-6000"
-	depends on MACH_TOSA
-	select RFKILL
-	help
-	  This is a simple driver that is able to control
-	  the state of built in bluetooth chip on tosa.
-
-config TOSA_USE_EXT_KEYCODES
-	bool "Tosa keyboard: use extended keycodes"
-	depends on MACH_TOSA
-	default n
-	help
-	  Say Y here to enable the tosa keyboard driver to generate extended
-	  (>= 127) keycodes. Be aware, that they can't be correctly interpreted
-	  by either console keyboard driver or by Kdrive keybd driver.
-
-	  Say Y only if you know, what you are doing!
-
-config MACH_ICONTROL
-	bool "TMT iControl/SafeTCam based on the MXM-8x10 CoM"
-	select CPU_PXA320
-	select PXA3xx
-
-config ARCH_PXA_ESERIES
-	bool "PXA based Toshiba e-series PDAs"
-	select PXA25x
-	select FB_W100
-
-config MACH_E330
-	bool "Toshiba e330"
-	default y
-	depends on ARCH_PXA_ESERIES
-	help
-	  Say Y here if you intend to run this kernel on a Toshiba
-	  e330 family PDA.
-
-config MACH_E350
-	bool "Toshiba e350"
-	default y
-	depends on ARCH_PXA_ESERIES
-	help
-	  Say Y here if you intend to run this kernel on a Toshiba
-	  e350 family PDA.
-
-config MACH_E740
-	bool "Toshiba e740"
-	default y
-	depends on ARCH_PXA_ESERIES
-	help
-	  Say Y here if you intend to run this kernel on a Toshiba
-	  e740 family PDA.
-
-config MACH_E750
-	bool "Toshiba e750"
-	default y
-	depends on ARCH_PXA_ESERIES
-	help
-	  Say Y here if you intend to run this kernel on a Toshiba
-	  e750 family PDA.
-
-config MACH_E400
-	bool "Toshiba e400"
-	default y
-	depends on ARCH_PXA_ESERIES
-	help
-	  Say Y here if you intend to run this kernel on a Toshiba
-	  e400 family PDA.
-
-config MACH_E800
-	bool "Toshiba e800"
-	default y
-	depends on ARCH_PXA_ESERIES
-	help
-	  Say Y here if you intend to run this kernel on a Toshiba
-	  e800 family PDA.
-
-config MACH_ZIPIT2
-	bool "Zipit Z2 Handheld"
-	select PXA27x
-	select HAVE_PWM
-endif
-endmenu
-
-config PXA25x
-	bool
-	select CPU_XSCALE
-	help
-	  Select code specific to PXA21x/25x/26x variants
-
-config PXA27x
-	bool
-	select CPU_XSCALE
-	help
-	  Select code specific to PXA27x variants
-
-config CPU_PXA26x
-	bool
-	select PXA25x
-	help
-	  Select code specific to PXA26x (codename Dalhart)
-
-config PXA3xx
-	bool
-	select CPU_XSC3
-	help
-	  Select code specific to PXA3xx variants
-
-config CPU_PXA300
-	bool
-	select PXA3xx
-	help
-	  PXA300 (codename Monahans-L)
-
-config CPU_PXA310
-	bool
-	select CPU_PXA300
-	select PXA310_ULPI if USB_ULPI
-	help
-	  PXA310 (codename Monahans-LV)
-
-config CPU_PXA320
-	bool
-	select PXA3xx
-	help
-	  PXA320 (codename Monahans-P)
-
-config CPU_PXA930
-	bool
-	select PXA3xx
-	help
-	  PXA930 (codename Tavor-P)
-
-config CPU_PXA935
-	bool
-	select CPU_PXA930
-	help
-	  PXA935 (codename Tavor-P65)
-
-config PXA95x
-	bool
-	select CPU_PJ4
-	help
-	  Select code specific to PXA95x variants
-
-config CPU_PXA955
-	bool
-	select PXA95x
-	help
-	  PXA950 (codename MG1)
-
-config PXA_SHARP_C7xx
-	bool
-	select SHARPSL_PM
-	help
-	  Enable support for all Sharp C7xx models
-
-config PXA_SHARP_Cxx00
-	bool
-	select SHARPSL_PM
-	help
-	  Enable common support for Sharp Cxx00 models
-
-config SHARPSL_PM
-	bool
-	select APM_EMULATION
-	select SHARPSL_PM_MAX1111
-
-config SHARPSL_PM_MAX1111
-	bool
-	select HWMON
-	select SPI
-	select SPI_MASTER
-	select SENSORS_MAX1111
-
-config PXA_HAVE_ISA_IRQS
-	bool
-
-config PXA310_ULPI
-	bool
-
-endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/Makefile b/ANDROID_3.4.5/arch/arm/mach-pxa/Makefile
deleted file mode 100644
index be0f7df8..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/Makefile
+++ /dev/null
@@ -1,106 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-# Common support (must be linked before board specific support)
-obj-y				+= clock.o devices.o generic.o irq.o \
-				   time.o reset.o
-obj-$(CONFIG_PM)		+= pm.o sleep.o standby.o
-
-ifeq ($(CONFIG_CPU_FREQ),y)
-obj-$(CONFIG_PXA25x)		+= cpufreq-pxa2xx.o
-obj-$(CONFIG_PXA27x)		+= cpufreq-pxa2xx.o
-obj-$(CONFIG_PXA3xx)		+= cpufreq-pxa3xx.o
-endif
-
-# Generic drivers that other drivers may depend upon
-
-# SoC-specific code
-obj-$(CONFIG_PXA25x)		+= mfp-pxa2xx.o clock-pxa2xx.o pxa2xx.o pxa25x.o
-obj-$(CONFIG_PXA27x)		+= mfp-pxa2xx.o clock-pxa2xx.o pxa2xx.o pxa27x.o
-obj-$(CONFIG_PXA3xx)		+= mfp-pxa3xx.o clock-pxa3xx.o pxa3xx.o smemc.o pxa3xx-ulpi.o
-obj-$(CONFIG_PXA95x)		+= mfp-pxa3xx.o clock-pxa3xx.o pxa3xx.o pxa95x.o smemc.o
-obj-$(CONFIG_CPU_PXA300)	+= pxa300.o
-obj-$(CONFIG_CPU_PXA320)	+= pxa320.o
-obj-$(CONFIG_CPU_PXA930)	+= pxa930.o
-
-# NOTE: keep the order of boards in accordance to their order in Kconfig
-
-# Intel/Marvell Dev Platforms
-obj-$(CONFIG_ARCH_LUBBOCK)	+= lubbock.o
-obj-$(CONFIG_MACH_MAINSTONE)	+= mainstone.o
-obj-$(CONFIG_MACH_ZYLONITE300)	+= zylonite.o zylonite_pxa300.o
-obj-$(CONFIG_MACH_ZYLONITE320)	+= zylonite.o zylonite_pxa320.o
-obj-$(CONFIG_MACH_LITTLETON)	+= littleton.o
-obj-$(CONFIG_MACH_TAVOREVB)	+= tavorevb.o
-obj-$(CONFIG_MACH_TAVOREVB3)	+= tavorevb3.o
-obj-$(CONFIG_MACH_SAAR)		+= saar.o
-obj-$(CONFIG_MACH_SAARB)	+= saarb.o
-
-# 3rd Party Dev Platforms
-obj-$(CONFIG_ARCH_PXA_IDP)	+= idp.o
-obj-$(CONFIG_ARCH_VIPER)	+= viper.o
-obj-$(CONFIG_MACH_ARCOM_ZEUS)	+= zeus.o
-obj-$(CONFIG_MACH_BALLOON3)	+= balloon3.o
-obj-$(CONFIG_MACH_CSB726)	+= csb726.o
-obj-$(CONFIG_CSB726_CSB701)	+= csb701.o
-obj-$(CONFIG_MACH_ARMCORE)      += cm-x2xx.o cm-x255.o cm-x270.o
-ifeq ($(CONFIG_PCI),y)
-obj-$(CONFIG_MACH_ARMCORE)	+= cm-x2xx-pci.o
-endif
-obj-$(CONFIG_MACH_EM_X270)	+= em-x270.o
-obj-$(CONFIG_MACH_CM_X300)      += cm-x300.o
-obj-$(CONFIG_MACH_CAPC7117)     += capc7117.o mxm8x10.o
-obj-$(CONFIG_ARCH_GUMSTIX)	+= gumstix.o
-obj-$(CONFIG_GUMSTIX_AM200EPD)	+= am200epd.o
-obj-$(CONFIG_GUMSTIX_AM300EPD)	+= am300epd.o
-obj-$(CONFIG_MACH_INTELMOTE2)	+= stargate2.o
-obj-$(CONFIG_MACH_STARGATE2)	+= stargate2.o
-obj-$(CONFIG_MACH_XCEP)         += xcep.o
-obj-$(CONFIG_MACH_TRIZEPS4)	+= trizeps4.o
-obj-$(CONFIG_MACH_LOGICPD_PXA270)	+= lpd270.o
-obj-$(CONFIG_MACH_PCM027)		+= pcm027.o
-obj-$(CONFIG_MACH_PCM990_BASEBOARD)	+= pcm990-baseboard.o
-obj-$(CONFIG_MACH_COLIBRI)			+= colibri-pxa270.o
-obj-$(CONFIG_MACH_COLIBRI_EVALBOARD)	+= colibri-evalboard.o
-obj-$(CONFIG_MACH_COLIBRI_PXA270_INCOME)	+= colibri-pxa270-income.o
-obj-$(CONFIG_MACH_COLIBRI300)	+= colibri-pxa3xx.o colibri-pxa300.o
-obj-$(CONFIG_MACH_COLIBRI320)	+= colibri-pxa3xx.o colibri-pxa320.o
-obj-$(CONFIG_MACH_VPAC270)	+= vpac270.o
-
-# End-user Products
-obj-$(CONFIG_MACH_H4700)	+= hx4700.o
-obj-$(CONFIG_MACH_H5000)	+= h5000.o
-obj-$(CONFIG_MACH_HIMALAYA)	+= himalaya.o
-obj-$(CONFIG_MACH_MAGICIAN)	+= magician.o
-obj-$(CONFIG_MACH_MIOA701)	+= mioa701.o mioa701_bootresume.o
-obj-$(CONFIG_PXA_EZX)           += ezx.o
-obj-$(CONFIG_MACH_MP900C)	+= mp900.o
-obj-$(CONFIG_MACH_PALMTE2)	+= palmte2.o
-obj-$(CONFIG_MACH_PALMTC)	+= palmtc.o
-obj-$(CONFIG_MACH_PALM27X)	+= palm27x.o
-obj-$(CONFIG_MACH_PALMT5)	+= palmt5.o
-obj-$(CONFIG_MACH_PALMTX)	+= palmtx.o
-obj-$(CONFIG_MACH_PALMZ72)	+= palmz72.o
-obj-$(CONFIG_MACH_PALMLD)	+= palmld.o
-obj-$(CONFIG_PALM_TREO)		+= palmtreo.o
-obj-$(CONFIG_PXA_SHARP_C7xx)	+= corgi.o sharpsl_pm.o corgi_pm.o
-obj-$(CONFIG_PXA_SHARP_Cxx00)	+= spitz.o sharpsl_pm.o spitz_pm.o
-obj-$(CONFIG_MACH_POODLE)	+= poodle.o
-obj-$(CONFIG_MACH_TOSA)		+= tosa.o
-obj-$(CONFIG_MACH_ICONTROL)     += icontrol.o mxm8x10.o
-obj-$(CONFIG_ARCH_PXA_ESERIES)	+= eseries.o
-obj-$(CONFIG_MACH_RAUMFELD_RC)		+= raumfeld.o
-obj-$(CONFIG_MACH_RAUMFELD_CONNECTOR)	+= raumfeld.o
-obj-$(CONFIG_MACH_RAUMFELD_SPEAKER)	+= raumfeld.o
-obj-$(CONFIG_MACH_ZIPIT2)	+= z2.o
-
-# Support for blinky lights
-led-y := leds.o
-led-$(CONFIG_ARCH_LUBBOCK)	+= leds-lubbock.o
-led-$(CONFIG_MACH_MAINSTONE)	+= leds-mainstone.o
-led-$(CONFIG_ARCH_PXA_IDP)	+= leds-idp.o
-
-obj-$(CONFIG_LEDS)		+= $(led-y)
-
-obj-$(CONFIG_TOSA_BT)		+= tosa-bt.o
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/Makefile.boot b/ANDROID_3.4.5/arch/arm/mach-pxa/Makefile.boot
deleted file mode 100644
index 2c1ae92f..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/Makefile.boot
+++ /dev/null
@@ -1,2 +0,0 @@
-   zreladdr-y	+= 0xa0008000
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/am200epd.c b/ANDROID_3.4.5/arch/arm/mach-pxa/am200epd.c
deleted file mode 100644
index ccdac4b6..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/am200epd.c
+++ /dev/null
@@ -1,387 +0,0 @@
-/*
- * am200epd.c -- Platform device for AM200 EPD kit
- *
- * Copyright (C) 2008, Jaya Kumar
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file COPYING in the main directory of this archive for
- * more details.
- *
- * Layout is based on skeletonfb.c by James Simmons and Geert Uytterhoeven.
- *
- * This work was made possible by help and equipment support from E-Ink
- * Corporation. http://support.eink.com/community
- *
- * This driver is written to be used with the Metronome display controller.
- * on the AM200 EPD prototype kit/development kit with an E-Ink 800x600
- * Vizplex EPD on a Gumstix board using the Lyre interface board.
- *
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/fb.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/irq.h>
-#include <linux/gpio.h>
-
-#include <mach/pxa25x.h>
-#include <mach/gumstix.h>
-#include <mach/pxafb.h>
-
-#include "generic.h"
-
-#include <video/metronomefb.h>
-
-static unsigned int panel_type = 6;
-static struct platform_device *am200_device;
-static struct metronome_board am200_board;
-
-static struct pxafb_mode_info am200_fb_mode_9inch7 = {
-	.pixclock	= 40000,
-	.xres		= 1200,
-	.yres		= 842,
-	.bpp		= 16,
-	.hsync_len	= 2,
-	.left_margin	= 2,
-	.right_margin	= 2,
-	.vsync_len	= 1,
-	.upper_margin	= 2,
-	.lower_margin	= 25,
-	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-};
-
-static struct pxafb_mode_info am200_fb_mode_8inch = {
-	.pixclock	= 40000,
-	.xres		= 1088,
-	.yres		= 791,
-	.bpp		= 16,
-	.hsync_len	= 28,
-	.left_margin	= 8,
-	.right_margin	= 30,
-	.vsync_len	= 8,
-	.upper_margin	= 10,
-	.lower_margin	= 8,
-	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-};
-
-static struct pxafb_mode_info am200_fb_mode_6inch = {
-	.pixclock	= 40189,
-	.xres		= 832,
-	.yres		= 622,
-	.bpp		= 16,
-	.hsync_len	= 28,
-	.left_margin	= 34,
-	.right_margin	= 34,
-	.vsync_len	= 25,
-	.upper_margin	= 0,
-	.lower_margin	= 2,
-	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-};
-
-static struct pxafb_mach_info am200_fb_info = {
-	.modes		= &am200_fb_mode_6inch,
-	.num_modes	= 1,
-	.lcd_conn	= LCD_TYPE_COLOR_TFT | LCD_PCLK_EDGE_FALL |
-			  LCD_AC_BIAS_FREQ(24),
-};
-
-/* register offsets for gpio control */
-#define LED_GPIO_PIN 51
-#define STDBY_GPIO_PIN 48
-#define RST_GPIO_PIN 49
-#define RDY_GPIO_PIN 32
-#define ERR_GPIO_PIN 17
-#define PCBPWR_GPIO_PIN 16
-static int gpios[] = { LED_GPIO_PIN , STDBY_GPIO_PIN , RST_GPIO_PIN,
-			RDY_GPIO_PIN, ERR_GPIO_PIN, PCBPWR_GPIO_PIN };
-static char *gpio_names[] = { "LED" , "STDBY" , "RST", "RDY", "ERR", "PCBPWR" };
-
-static int am200_init_gpio_regs(struct metronomefb_par *par)
-{
-	int i;
-	int err;
-
-	for (i = 0; i < ARRAY_SIZE(gpios); i++) {
-		err = gpio_request(gpios[i], gpio_names[i]);
-		if (err) {
-			dev_err(&am200_device->dev, "failed requesting "
-				"gpio %s, err=%d\n", gpio_names[i], err);
-			goto err_req_gpio;
-		}
-	}
-
-	gpio_direction_output(LED_GPIO_PIN, 0);
-	gpio_direction_output(STDBY_GPIO_PIN, 0);
-	gpio_direction_output(RST_GPIO_PIN, 0);
-
-	gpio_direction_input(RDY_GPIO_PIN);
-	gpio_direction_input(ERR_GPIO_PIN);
-
-	gpio_direction_output(PCBPWR_GPIO_PIN, 0);
-
-	return 0;
-
-err_req_gpio:
-	while (--i >= 0)
-		gpio_free(gpios[i]);
-
-	return err;
-}
-
-static void am200_cleanup(struct metronomefb_par *par)
-{
-	int i;
-
-	free_irq(PXA_GPIO_TO_IRQ(RDY_GPIO_PIN), par);
-
-	for (i = 0; i < ARRAY_SIZE(gpios); i++)
-		gpio_free(gpios[i]);
-}
-
-static int am200_share_video_mem(struct fb_info *info)
-{
-	/* rough check if this is our desired fb and not something else */
-	if ((info->var.xres != am200_fb_info.modes->xres)
-		|| (info->var.yres != am200_fb_info.modes->yres))
-		return 0;
-
-	/* we've now been notified that we have our new fb */
-	am200_board.metromem = info->screen_base;
-	am200_board.host_fbinfo = info;
-
-	/* try to refcount host drv since we are the consumer after this */
-	if (!try_module_get(info->fbops->owner))
-		return -ENODEV;
-
-	return 0;
-}
-
-static int am200_unshare_video_mem(struct fb_info *info)
-{
-	dev_dbg(&am200_device->dev, "ENTER %s\n", __func__);
-
-	if (info != am200_board.host_fbinfo)
-		return 0;
-
-	module_put(am200_board.host_fbinfo->fbops->owner);
-	return 0;
-}
-
-static int am200_fb_notifier_callback(struct notifier_block *self,
-				 unsigned long event, void *data)
-{
-	struct fb_event *evdata = data;
-	struct fb_info *info = evdata->info;
-
-	dev_dbg(&am200_device->dev, "ENTER %s\n", __func__);
-
-	if (event == FB_EVENT_FB_REGISTERED)
-		return am200_share_video_mem(info);
-	else if (event == FB_EVENT_FB_UNREGISTERED)
-		return am200_unshare_video_mem(info);
-
-	return 0;
-}
-
-static struct notifier_block am200_fb_notif = {
-	.notifier_call = am200_fb_notifier_callback,
-};
-
-/* this gets called as part of our init. these steps must be done now so
- * that we can use pxa_set_fb_info */
-static void __init am200_presetup_fb(void)
-{
-	int fw;
-	int fh;
-	int padding_size;
-	int totalsize;
-
-	switch (panel_type) {
-	case 6:
-		am200_fb_info.modes = &am200_fb_mode_6inch;
-		break;
-	case 8:
-		am200_fb_info.modes = &am200_fb_mode_8inch;
-		break;
-	case 97:
-		am200_fb_info.modes = &am200_fb_mode_9inch7;
-		break;
-	default:
-		dev_err(&am200_device->dev, "invalid panel_type selection,"
-						" setting to 6\n");
-		am200_fb_info.modes = &am200_fb_mode_6inch;
-		break;
-	}
-
-	/* the frame buffer is divided as follows:
-	command | CRC | padding
-	16kb waveform data | CRC | padding
-	image data | CRC
-	*/
-
-	fw = am200_fb_info.modes->xres;
-	fh = am200_fb_info.modes->yres;
-
-	/* waveform must be 16k + 2 for checksum */
-	am200_board.wfm_size = roundup(16*1024 + 2, fw);
-
-	padding_size = PAGE_SIZE + (4 * fw);
-
-	/* total is 1 cmd , 1 wfm, padding and image */
-	totalsize = fw + am200_board.wfm_size + padding_size + (fw*fh);
-
-	/* save this off because we're manipulating fw after this and
-	 * we'll need it when we're ready to setup the framebuffer */
-	am200_board.fw = fw;
-	am200_board.fh = fh;
-
-	/* the reason we do this adjustment is because we want to acquire
-	 * more framebuffer memory without imposing custom awareness on the
-	 * underlying pxafb driver */
-	am200_fb_info.modes->yres = DIV_ROUND_UP(totalsize, fw);
-
-	/* we divide since we told the LCD controller we're 16bpp */
-	am200_fb_info.modes->xres /= 2;
-
-	pxa_set_fb_info(NULL, &am200_fb_info);
-
-}
-
-/* this gets called by metronomefb as part of its init, in our case, we
- * have already completed initial framebuffer init in presetup_fb so we
- * can just setup the fb access pointers */
-static int am200_setup_fb(struct metronomefb_par *par)
-{
-	int fw;
-	int fh;
-
-	fw = am200_board.fw;
-	fh = am200_board.fh;
-
-	/* metromem was set up by the notifier in share_video_mem so now
-	 * we can use its value to calculate the other entries */
-	par->metromem_cmd = (struct metromem_cmd *) am200_board.metromem;
-	par->metromem_wfm = am200_board.metromem + fw;
-	par->metromem_img = par->metromem_wfm + am200_board.wfm_size;
-	par->metromem_img_csum = (u16 *) (par->metromem_img + (fw * fh));
-	par->metromem_dma = am200_board.host_fbinfo->fix.smem_start;
-
-	return 0;
-}
-
-static int am200_get_panel_type(void)
-{
-	return panel_type;
-}
-
-static irqreturn_t am200_handle_irq(int irq, void *dev_id)
-{
-	struct metronomefb_par *par = dev_id;
-
-	wake_up_interruptible(&par->waitq);
-	return IRQ_HANDLED;
-}
-
-static int am200_setup_irq(struct fb_info *info)
-{
-	int ret;
-
-	ret = request_irq(PXA_GPIO_TO_IRQ(RDY_GPIO_PIN), am200_handle_irq,
-				IRQF_DISABLED|IRQF_TRIGGER_FALLING,
-				"AM200", info->par);
-	if (ret)
-		dev_err(&am200_device->dev, "request_irq failed: %d\n", ret);
-
-	return ret;
-}
-
-static void am200_set_rst(struct metronomefb_par *par, int state)
-{
-	gpio_set_value(RST_GPIO_PIN, state);
-}
-
-static void am200_set_stdby(struct metronomefb_par *par, int state)
-{
-	gpio_set_value(STDBY_GPIO_PIN, state);
-}
-
-static int am200_wait_event(struct metronomefb_par *par)
-{
-	return wait_event_timeout(par->waitq, gpio_get_value(RDY_GPIO_PIN), HZ);
-}
-
-static int am200_wait_event_intr(struct metronomefb_par *par)
-{
-	return wait_event_interruptible_timeout(par->waitq,
-					gpio_get_value(RDY_GPIO_PIN), HZ);
-}
-
-static struct metronome_board am200_board = {
-	.owner			= THIS_MODULE,
-	.setup_irq		= am200_setup_irq,
-	.setup_io		= am200_init_gpio_regs,
-	.setup_fb		= am200_setup_fb,
-	.set_rst		= am200_set_rst,
-	.set_stdby		= am200_set_stdby,
-	.met_wait_event		= am200_wait_event,
-	.met_wait_event_intr	= am200_wait_event_intr,
-	.get_panel_type		= am200_get_panel_type,
-	.cleanup		= am200_cleanup,
-};
-
-static unsigned long am200_pin_config[] __initdata = {
-	GPIO51_GPIO,
-	GPIO49_GPIO,
-	GPIO48_GPIO,
-	GPIO32_GPIO,
-	GPIO17_GPIO,
-	GPIO16_GPIO,
-};
-
-int __init am200_init(void)
-{
-	int ret;
-
-	/* before anything else, we request notification for any fb
-	 * creation events */
-	fb_register_client(&am200_fb_notif);
-
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(am200_pin_config));
-
-	/* request our platform independent driver */
-	request_module("metronomefb");
-
-	am200_device = platform_device_alloc("metronomefb", -1);
-	if (!am200_device)
-		return -ENOMEM;
-
-	/* the am200_board that will be seen by metronomefb is a copy */
-	platform_device_add_data(am200_device, &am200_board,
-					sizeof(am200_board));
-
-	/* this _add binds metronomefb to am200. metronomefb refcounts am200 */
-	ret = platform_device_add(am200_device);
-
-	if (ret) {
-		platform_device_put(am200_device);
-		fb_unregister_client(&am200_fb_notif);
-		return ret;
-	}
-
-	am200_presetup_fb();
-
-	return 0;
-}
-
-module_param(panel_type, uint, 0);
-MODULE_PARM_DESC(panel_type, "Select the panel type: 6, 8, 97");
-
-MODULE_DESCRIPTION("board driver for am200 metronome epd kit");
-MODULE_AUTHOR("Jaya Kumar");
-MODULE_LICENSE("GPL");
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/am300epd.c b/ANDROID_3.4.5/arch/arm/mach-pxa/am300epd.c
deleted file mode 100644
index 76c4b949..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/am300epd.c
+++ /dev/null
@@ -1,296 +0,0 @@
-/*
- * am300epd.c -- Platform device for AM300 EPD kit
- *
- * Copyright (C) 2008, Jaya Kumar
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file COPYING in the main directory of this archive for
- * more details.
- *
- * This work was made possible by help and equipment support from E-Ink
- * Corporation. http://support.eink.com/community
- *
- * This driver is written to be used with the Broadsheet display controller.
- * on the AM300 EPD prototype kit/development kit with an E-Ink 800x600
- * Vizplex EPD on a Gumstix board using the Broadsheet interface board.
- *
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/fb.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/irq.h>
-#include <linux/gpio.h>
-
-#include <mach/gumstix.h>
-#include <mach/mfp-pxa25x.h>
-#include <mach/pxafb.h>
-
-#include "generic.h"
-
-#include <video/broadsheetfb.h>
-
-static unsigned int panel_type = 6;
-static struct platform_device *am300_device;
-static struct broadsheet_board am300_board;
-
-static unsigned long am300_pin_config[] __initdata = {
-	GPIO16_GPIO,
-	GPIO17_GPIO,
-	GPIO32_GPIO,
-	GPIO48_GPIO,
-	GPIO49_GPIO,
-	GPIO51_GPIO,
-	GPIO74_GPIO,
-	GPIO75_GPIO,
-	GPIO76_GPIO,
-	GPIO77_GPIO,
-
-	/* this is the 16-bit hdb bus 58-73 */
-	GPIO58_GPIO,
-	GPIO59_GPIO,
-	GPIO60_GPIO,
-	GPIO61_GPIO,
-
-	GPIO62_GPIO,
-	GPIO63_GPIO,
-	GPIO64_GPIO,
-	GPIO65_GPIO,
-
-	GPIO66_GPIO,
-	GPIO67_GPIO,
-	GPIO68_GPIO,
-	GPIO69_GPIO,
-
-	GPIO70_GPIO,
-	GPIO71_GPIO,
-	GPIO72_GPIO,
-	GPIO73_GPIO,
-};
-
-/* register offsets for gpio control */
-#define PWR_GPIO_PIN	16
-#define CFG_GPIO_PIN	17
-#define RDY_GPIO_PIN	32
-#define DC_GPIO_PIN	48
-#define RST_GPIO_PIN	49
-#define LED_GPIO_PIN	51
-#define RD_GPIO_PIN	74
-#define WR_GPIO_PIN	75
-#define CS_GPIO_PIN	76
-#define IRQ_GPIO_PIN	77
-
-/* hdb bus */
-#define DB0_GPIO_PIN	58
-#define DB15_GPIO_PIN	73
-
-static int gpios[] = { PWR_GPIO_PIN, CFG_GPIO_PIN, RDY_GPIO_PIN, DC_GPIO_PIN,
-			RST_GPIO_PIN, RD_GPIO_PIN, WR_GPIO_PIN, CS_GPIO_PIN,
-			IRQ_GPIO_PIN, LED_GPIO_PIN };
-static char *gpio_names[] = { "PWR", "CFG", "RDY", "DC", "RST", "RD", "WR",
-				"CS", "IRQ", "LED" };
-
-static int am300_wait_event(struct broadsheetfb_par *par)
-{
-	/* todo: improve err recovery */
-	wait_event(par->waitq, gpio_get_value(RDY_GPIO_PIN));
-	return 0;
-}
-
-static int am300_init_gpio_regs(struct broadsheetfb_par *par)
-{
-	int i;
-	int err;
-	char dbname[8];
-
-	for (i = 0; i < ARRAY_SIZE(gpios); i++) {
-		err = gpio_request(gpios[i], gpio_names[i]);
-		if (err) {
-			dev_err(&am300_device->dev, "failed requesting "
-				"gpio %s, err=%d\n", gpio_names[i], err);
-			goto err_req_gpio;
-		}
-	}
-
-	/* we also need to take care of the hdb bus */
-	for (i = DB0_GPIO_PIN; i <= DB15_GPIO_PIN; i++) {
-		sprintf(dbname, "DB%d", i);
-		err = gpio_request(i, dbname);
-		if (err) {
-			dev_err(&am300_device->dev, "failed requesting "
-				"gpio %d, err=%d\n", i, err);
-			goto err_req_gpio2;
-		}
-	}
-
-	/* setup the outputs and init values */
-	gpio_direction_output(PWR_GPIO_PIN, 0);
-	gpio_direction_output(CFG_GPIO_PIN, 1);
-	gpio_direction_output(DC_GPIO_PIN, 0);
-	gpio_direction_output(RD_GPIO_PIN, 1);
-	gpio_direction_output(WR_GPIO_PIN, 1);
-	gpio_direction_output(CS_GPIO_PIN, 1);
-	gpio_direction_output(RST_GPIO_PIN, 0);
-
-	/* setup the inputs */
-	gpio_direction_input(RDY_GPIO_PIN);
-	gpio_direction_input(IRQ_GPIO_PIN);
-
-	/* start the hdb bus as an input */
-	for (i = DB0_GPIO_PIN; i <= DB15_GPIO_PIN; i++)
-		gpio_direction_output(i, 0);
-
-	/* go into command mode */
-	gpio_set_value(CFG_GPIO_PIN, 1);
-	gpio_set_value(RST_GPIO_PIN, 0);
-	msleep(10);
-	gpio_set_value(RST_GPIO_PIN, 1);
-	msleep(10);
-	am300_wait_event(par);
-
-	return 0;
-
-err_req_gpio2:
-	while (--i >= DB0_GPIO_PIN)
-		gpio_free(i);
-	i = ARRAY_SIZE(gpios);
-err_req_gpio:
-	while (--i >= 0)
-		gpio_free(gpios[i]);
-
-	return err;
-}
-
-static int am300_init_board(struct broadsheetfb_par *par)
-{
-	return am300_init_gpio_regs(par);
-}
-
-static void am300_cleanup(struct broadsheetfb_par *par)
-{
-	int i;
-
-	free_irq(PXA_GPIO_TO_IRQ(RDY_GPIO_PIN), par);
-
-	for (i = 0; i < ARRAY_SIZE(gpios); i++)
-		gpio_free(gpios[i]);
-
-	for (i = DB0_GPIO_PIN; i <= DB15_GPIO_PIN; i++)
-		gpio_free(i);
-
-}
-
-static u16 am300_get_hdb(struct broadsheetfb_par *par)
-{
-	u16 res = 0;
-	int i;
-
-	for (i = 0; i <= (DB15_GPIO_PIN - DB0_GPIO_PIN) ; i++)
-		res |= (gpio_get_value(DB0_GPIO_PIN + i)) ? (1 << i) : 0;
-
-	return res;
-}
-
-static void am300_set_hdb(struct broadsheetfb_par *par, u16 data)
-{
-	int i;
-
-	for (i = 0; i <= (DB15_GPIO_PIN - DB0_GPIO_PIN) ; i++)
-		gpio_set_value(DB0_GPIO_PIN + i, (data >> i) & 0x01);
-}
-
-
-static void am300_set_ctl(struct broadsheetfb_par *par, unsigned char bit,
-				u8 state)
-{
-	switch (bit) {
-	case BS_CS:
-		gpio_set_value(CS_GPIO_PIN, state);
-		break;
-	case BS_DC:
-		gpio_set_value(DC_GPIO_PIN, state);
-		break;
-	case BS_WR:
-		gpio_set_value(WR_GPIO_PIN, state);
-		break;
-	}
-}
-
-static int am300_get_panel_type(void)
-{
-	return panel_type;
-}
-
-static irqreturn_t am300_handle_irq(int irq, void *dev_id)
-{
-	struct broadsheetfb_par *par = dev_id;
-
-	wake_up(&par->waitq);
-	return IRQ_HANDLED;
-}
-
-static int am300_setup_irq(struct fb_info *info)
-{
-	int ret;
-	struct broadsheetfb_par *par = info->par;
-
-	ret = request_irq(PXA_GPIO_TO_IRQ(RDY_GPIO_PIN), am300_handle_irq,
-				IRQF_DISABLED|IRQF_TRIGGER_RISING,
-				"AM300", par);
-	if (ret)
-		dev_err(&am300_device->dev, "request_irq failed: %d\n", ret);
-
-	return ret;
-}
-
-static struct broadsheet_board am300_board = {
-	.owner			= THIS_MODULE,
-	.init			= am300_init_board,
-	.cleanup		= am300_cleanup,
-	.set_hdb		= am300_set_hdb,
-	.get_hdb		= am300_get_hdb,
-	.set_ctl		= am300_set_ctl,
-	.wait_for_rdy		= am300_wait_event,
-	.get_panel_type		= am300_get_panel_type,
-	.setup_irq		= am300_setup_irq,
-};
-
-int __init am300_init(void)
-{
-	int ret;
-
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(am300_pin_config));
-
-	/* request our platform independent driver */
-	request_module("broadsheetfb");
-
-	am300_device = platform_device_alloc("broadsheetfb", -1);
-	if (!am300_device)
-		return -ENOMEM;
-
-	/* the am300_board that will be seen by broadsheetfb is a copy */
-	platform_device_add_data(am300_device, &am300_board,
-					sizeof(am300_board));
-
-	ret = platform_device_add(am300_device);
-
-	if (ret) {
-		platform_device_put(am300_device);
-		return ret;
-	}
-
-	return 0;
-}
-
-module_param(panel_type, uint, 0);
-MODULE_PARM_DESC(panel_type, "Select the panel type: 37, 6, 97");
-
-MODULE_DESCRIPTION("board driver for am300 epd kit");
-MODULE_AUTHOR("Jaya Kumar");
-MODULE_LICENSE("GPL");
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/balloon3.c b/ANDROID_3.4.5/arch/arm/mach-pxa/balloon3.c
deleted file mode 100644
index c35456f0..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/balloon3.c
+++ /dev/null
@@ -1,834 +0,0 @@
-/*
- *  linux/arch/arm/mach-pxa/balloon3.c
- *
- *  Support for Balloonboard.org Balloon3 board.
- *
- *  Author:	Nick Bane, Wookey, Jonathan McDowell
- *  Created:	June, 2006
- *  Copyright:	Toby Churchill Ltd
- *  Derived from mainstone.c, by Nico Pitre
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#include <linux/export.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/sched.h>
-#include <linux/bitops.h>
-#include <linux/fb.h>
-#include <linux/gpio.h>
-#include <linux/ioport.h>
-#include <linux/ucb1400.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/types.h>
-#include <linux/i2c/pcf857x.h>
-#include <linux/i2c/pxa-i2c.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/physmap.h>
-#include <linux/regulator/max1586.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-#include <asm/sizes.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/flash.h>
-
-#include <mach/pxa27x.h>
-#include <mach/balloon3.h>
-#include <mach/audio.h>
-#include <mach/pxafb.h>
-#include <mach/mmc.h>
-#include <mach/udc.h>
-#include <mach/pxa27x-udc.h>
-#include <mach/irda.h>
-#include <mach/ohci.h>
-
-#include "generic.h"
-#include "devices.h"
-
-/******************************************************************************
- * Pin configuration
- ******************************************************************************/
-static unsigned long balloon3_pin_config[] __initdata = {
-	/* Select BTUART 'COM1/ttyS0' as IO option for pins 42/43/44/45 */
-	GPIO42_BTUART_RXD,
-	GPIO43_BTUART_TXD,
-	GPIO44_BTUART_CTS,
-	GPIO45_BTUART_RTS,
-
-	/* Reset, configured as GPIO wakeup source */
-	GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,
-};
-
-/******************************************************************************
- * Compatibility: Parameter parsing
- ******************************************************************************/
-static unsigned long balloon3_irq_enabled;
-
-static unsigned long balloon3_features_present =
-		(1 << BALLOON3_FEATURE_OHCI) | (1 << BALLOON3_FEATURE_CF) |
-		(1 << BALLOON3_FEATURE_AUDIO) |
-		(1 << BALLOON3_FEATURE_TOPPOLY);
-
-int balloon3_has(enum balloon3_features feature)
-{
-	return (balloon3_features_present & (1 << feature)) ? 1 : 0;
-}
-EXPORT_SYMBOL_GPL(balloon3_has);
-
-int __init parse_balloon3_features(char *arg)
-{
-	if (!arg)
-		return 0;
-
-	return strict_strtoul(arg, 0, &balloon3_features_present);
-}
-early_param("balloon3_features", parse_balloon3_features);
-
-/******************************************************************************
- * Compact Flash slot
- ******************************************************************************/
-#if	defined(CONFIG_PCMCIA_PXA2XX) || defined(CONFIG_PCMCIA_PXA2XX_MODULE)
-static unsigned long balloon3_cf_pin_config[] __initdata = {
-	GPIO48_nPOE,
-	GPIO49_nPWE,
-	GPIO50_nPIOR,
-	GPIO51_nPIOW,
-	GPIO85_nPCE_1,
-	GPIO54_nPCE_2,
-	GPIO79_PSKTSEL,
-	GPIO55_nPREG,
-	GPIO56_nPWAIT,
-	GPIO57_nIOIS16,
-};
-
-static void __init balloon3_cf_init(void)
-{
-	if (!balloon3_has(BALLOON3_FEATURE_CF))
-		return;
-
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_cf_pin_config));
-}
-#else
-static inline void balloon3_cf_init(void) {}
-#endif
-
-/******************************************************************************
- * NOR Flash
- ******************************************************************************/
-#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
-static struct mtd_partition balloon3_nor_partitions[] = {
-	{
-		.name		= "Flash",
-		.offset		= 0x00000000,
-		.size		= MTDPART_SIZ_FULL,
-	}
-};
-
-static struct physmap_flash_data balloon3_flash_data[] = {
-	{
-		.width		= 2,	/* bankwidth in bytes */
-		.parts		= balloon3_nor_partitions,
-		.nr_parts	= ARRAY_SIZE(balloon3_nor_partitions)
-	}
-};
-
-static struct resource balloon3_flash_resource = {
-	.start	= PXA_CS0_PHYS,
-	.end	= PXA_CS0_PHYS + SZ_64M - 1,
-	.flags	= IORESOURCE_MEM,
-};
-
-static struct platform_device balloon3_flash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.resource	= &balloon3_flash_resource,
-	.num_resources	= 1,
-	.dev 		= {
-		.platform_data = balloon3_flash_data,
-	},
-};
-static void __init balloon3_nor_init(void)
-{
-	platform_device_register(&balloon3_flash);
-}
-#else
-static inline void balloon3_nor_init(void) {}
-#endif
-
-/******************************************************************************
- * Audio and Touchscreen
- ******************************************************************************/
-#if	defined(CONFIG_TOUCHSCREEN_UCB1400) || \
-	defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE)
-static unsigned long balloon3_ac97_pin_config[] __initdata = {
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-	GPIO113_AC97_nRESET,
-	GPIO95_GPIO,
-};
-
-static struct ucb1400_pdata vpac270_ucb1400_pdata = {
-	.irq		= PXA_GPIO_TO_IRQ(BALLOON3_GPIO_CODEC_IRQ),
-};
-
-
-static struct platform_device balloon3_ucb1400_device = {
-	.name		= "ucb1400_core",
-	.id		= -1,
-	.dev		= {
-		.platform_data = &vpac270_ucb1400_pdata,
-	},
-};
-
-static void __init balloon3_ts_init(void)
-{
-	if (!balloon3_has(BALLOON3_FEATURE_AUDIO))
-		return;
-
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_ac97_pin_config));
-	pxa_set_ac97_info(NULL);
-	platform_device_register(&balloon3_ucb1400_device);
-}
-#else
-static inline void balloon3_ts_init(void) {}
-#endif
-
-/******************************************************************************
- * Framebuffer
- ******************************************************************************/
-#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
-static unsigned long balloon3_lcd_pin_config[] __initdata = {
-	GPIOxx_LCD_TFT_16BPP,
-	GPIO99_GPIO,
-};
-
-static struct pxafb_mode_info balloon3_lcd_modes[] = {
-	{
-		.pixclock		= 38000,
-		.xres			= 480,
-		.yres			= 640,
-		.bpp			= 16,
-		.hsync_len		= 8,
-		.left_margin		= 8,
-		.right_margin		= 8,
-		.vsync_len		= 2,
-		.upper_margin		= 4,
-		.lower_margin		= 5,
-		.sync			= 0,
-	},
-};
-
-static struct pxafb_mach_info balloon3_lcd_screen = {
-	.modes			= balloon3_lcd_modes,
-	.num_modes		= ARRAY_SIZE(balloon3_lcd_modes),
-	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
-};
-
-static void balloon3_backlight_power(int on)
-{
-	gpio_set_value(BALLOON3_GPIO_RUN_BACKLIGHT, on);
-}
-
-static void __init balloon3_lcd_init(void)
-{
-	int ret;
-
-	if (!balloon3_has(BALLOON3_FEATURE_TOPPOLY))
-		return;
-
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_lcd_pin_config));
-
-	ret = gpio_request(BALLOON3_GPIO_RUN_BACKLIGHT, "BKL-ON");
-	if (ret) {
-		pr_err("Requesting BKL-ON GPIO failed!\n");
-		goto err;
-	}
-
-	ret = gpio_direction_output(BALLOON3_GPIO_RUN_BACKLIGHT, 1);
-	if (ret) {
-		pr_err("Setting BKL-ON GPIO direction failed!\n");
-		goto err2;
-	}
-
-	balloon3_lcd_screen.pxafb_backlight_power = balloon3_backlight_power;
-	pxa_set_fb_info(NULL, &balloon3_lcd_screen);
-	return;
-
-err2:
-	gpio_free(BALLOON3_GPIO_RUN_BACKLIGHT);
-err:
-	return;
-}
-#else
-static inline void balloon3_lcd_init(void) {}
-#endif
-
-/******************************************************************************
- * SD/MMC card controller
- ******************************************************************************/
-#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
-static unsigned long balloon3_mmc_pin_config[] __initdata = {
-	GPIO32_MMC_CLK,
-	GPIO92_MMC_DAT_0,
-	GPIO109_MMC_DAT_1,
-	GPIO110_MMC_DAT_2,
-	GPIO111_MMC_DAT_3,
-	GPIO112_MMC_CMD,
-};
-
-static struct pxamci_platform_data balloon3_mci_platform_data = {
-	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.gpio_card_detect	= -1,
-	.gpio_card_ro		= -1,
-	.gpio_power		= -1,
-	.detect_delay_ms	= 200,
-};
-
-static void __init balloon3_mmc_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_mmc_pin_config));
-	pxa_set_mci_info(&balloon3_mci_platform_data);
-}
-#else
-static inline void balloon3_mmc_init(void) {}
-#endif
-
-/******************************************************************************
- * USB Gadget
- ******************************************************************************/
-#if defined(CONFIG_USB_PXA27X)||defined(CONFIG_USB_PXA27X_MODULE)
-static void balloon3_udc_command(int cmd)
-{
-	if (cmd == PXA2XX_UDC_CMD_CONNECT)
-		UP2OCR |= UP2OCR_DPPUE | UP2OCR_DPPUBE;
-	else if (cmd == PXA2XX_UDC_CMD_DISCONNECT)
-		UP2OCR &= ~UP2OCR_DPPUE;
-}
-
-static int balloon3_udc_is_connected(void)
-{
-	return 1;
-}
-
-static struct pxa2xx_udc_mach_info balloon3_udc_info __initdata = {
-	.udc_command		= balloon3_udc_command,
-	.udc_is_connected	= balloon3_udc_is_connected,
-	.gpio_pullup		= -1,
-};
-
-static void __init balloon3_udc_init(void)
-{
-	pxa_set_udc_info(&balloon3_udc_info);
-	platform_device_register(&balloon3_gpio_vbus);
-}
-#else
-static inline void balloon3_udc_init(void) {}
-#endif
-
-/******************************************************************************
- * IrDA
- ******************************************************************************/
-#if defined(CONFIG_IRDA) || defined(CONFIG_IRDA_MODULE)
-static struct pxaficp_platform_data balloon3_ficp_platform_data = {
-	.transceiver_cap	= IR_FIRMODE | IR_SIRMODE | IR_OFF,
-};
-
-static void __init balloon3_irda_init(void)
-{
-	pxa_set_ficp_info(&balloon3_ficp_platform_data);
-}
-#else
-static inline void balloon3_irda_init(void) {}
-#endif
-
-/******************************************************************************
- * USB Host
- ******************************************************************************/
-#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-static unsigned long balloon3_uhc_pin_config[] __initdata = {
-	GPIO88_USBH1_PWR,
-	GPIO89_USBH1_PEN,
-};
-
-static struct pxaohci_platform_data balloon3_ohci_info = {
-	.port_mode	= PMM_PERPORT_MODE,
-	.flags		= ENABLE_PORT_ALL | POWER_CONTROL_LOW | POWER_SENSE_LOW,
-};
-
-static void __init balloon3_uhc_init(void)
-{
-	if (!balloon3_has(BALLOON3_FEATURE_OHCI))
-		return;
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_uhc_pin_config));
-	pxa_set_ohci_info(&balloon3_ohci_info);
-}
-#else
-static inline void balloon3_uhc_init(void) {}
-#endif
-
-/******************************************************************************
- * LEDs
- ******************************************************************************/
-#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
-static unsigned long balloon3_led_pin_config[] __initdata = {
-	GPIO9_GPIO,	/* NAND activity LED */
-	GPIO10_GPIO,	/* Heartbeat LED */
-};
-
-struct gpio_led balloon3_gpio_leds[] = {
-	{
-		.name			= "balloon3:green:idle",
-		.default_trigger	= "heartbeat",
-		.gpio			= BALLOON3_GPIO_LED_IDLE,
-		.active_low		= 1,
-	}, {
-		.name			= "balloon3:green:nand",
-		.default_trigger	= "nand-disk",
-		.gpio			= BALLOON3_GPIO_LED_NAND,
-		.active_low		= 1,
-	},
-};
-
-static struct gpio_led_platform_data balloon3_gpio_led_info = {
-	.leds		= balloon3_gpio_leds,
-	.num_leds	= ARRAY_SIZE(balloon3_gpio_leds),
-};
-
-static struct platform_device balloon3_leds = {
-	.name	= "leds-gpio",
-	.id	= 0,
-	.dev	= {
-		.platform_data	= &balloon3_gpio_led_info,
-	}
-};
-
-struct gpio_led balloon3_pcf_gpio_leds[] = {
-	{
-		.name			= "balloon3:green:led0",
-		.gpio			= BALLOON3_PCF_GPIO_LED0,
-		.active_low		= 1,
-	}, {
-		.name			= "balloon3:green:led1",
-		.gpio			= BALLOON3_PCF_GPIO_LED1,
-		.active_low		= 1,
-	}, {
-		.name			= "balloon3:orange:led2",
-		.gpio			= BALLOON3_PCF_GPIO_LED2,
-		.active_low		= 1,
-	}, {
-		.name			= "balloon3:orange:led3",
-		.gpio			= BALLOON3_PCF_GPIO_LED3,
-		.active_low		= 1,
-	}, {
-		.name			= "balloon3:orange:led4",
-		.gpio			= BALLOON3_PCF_GPIO_LED4,
-		.active_low		= 1,
-	}, {
-		.name			= "balloon3:orange:led5",
-		.gpio			= BALLOON3_PCF_GPIO_LED5,
-		.active_low		= 1,
-	}, {
-		.name			= "balloon3:red:led6",
-		.gpio			= BALLOON3_PCF_GPIO_LED6,
-		.active_low		= 1,
-	}, {
-		.name			= "balloon3:red:led7",
-		.gpio			= BALLOON3_PCF_GPIO_LED7,
-		.active_low		= 1,
-	},
-};
-
-static struct gpio_led_platform_data balloon3_pcf_gpio_led_info = {
-	.leds		= balloon3_pcf_gpio_leds,
-	.num_leds	= ARRAY_SIZE(balloon3_pcf_gpio_leds),
-};
-
-static struct platform_device balloon3_pcf_leds = {
-	.name	= "leds-gpio",
-	.id	= 1,
-	.dev	= {
-		.platform_data	= &balloon3_pcf_gpio_led_info,
-	}
-};
-
-static void __init balloon3_leds_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_led_pin_config));
-	platform_device_register(&balloon3_leds);
-	platform_device_register(&balloon3_pcf_leds);
-}
-#else
-static inline void balloon3_leds_init(void) {}
-#endif
-
-/******************************************************************************
- * FPGA IRQ
- ******************************************************************************/
-static void balloon3_mask_irq(struct irq_data *d)
-{
-	int balloon3_irq = (d->irq - BALLOON3_IRQ(0));
-	balloon3_irq_enabled &= ~(1 << balloon3_irq);
-	__raw_writel(~balloon3_irq_enabled, BALLOON3_INT_CONTROL_REG);
-}
-
-static void balloon3_unmask_irq(struct irq_data *d)
-{
-	int balloon3_irq = (d->irq - BALLOON3_IRQ(0));
-	balloon3_irq_enabled |= (1 << balloon3_irq);
-	__raw_writel(~balloon3_irq_enabled, BALLOON3_INT_CONTROL_REG);
-}
-
-static struct irq_chip balloon3_irq_chip = {
-	.name		= "FPGA",
-	.irq_ack	= balloon3_mask_irq,
-	.irq_mask	= balloon3_mask_irq,
-	.irq_unmask	= balloon3_unmask_irq,
-};
-
-static void balloon3_irq_handler(unsigned int irq, struct irq_desc *desc)
-{
-	unsigned long pending = __raw_readl(BALLOON3_INT_CONTROL_REG) &
-					balloon3_irq_enabled;
-	do {
-		/* clear useless edge notification */
-		if (desc->irq_data.chip->irq_ack) {
-			struct irq_data *d;
-
-			d = irq_get_irq_data(BALLOON3_AUX_NIRQ);
-			desc->irq_data.chip->irq_ack(d);
-		}
-
-		while (pending) {
-			irq = BALLOON3_IRQ(0) + __ffs(pending);
-			generic_handle_irq(irq);
-			pending &= pending - 1;
-		}
-		pending = __raw_readl(BALLOON3_INT_CONTROL_REG) &
-				balloon3_irq_enabled;
-	} while (pending);
-}
-
-static void __init balloon3_init_irq(void)
-{
-	int irq;
-
-	pxa27x_init_irq();
-	/* setup extra Balloon3 irqs */
-	for (irq = BALLOON3_IRQ(0); irq <= BALLOON3_IRQ(7); irq++) {
-		irq_set_chip_and_handler(irq, &balloon3_irq_chip,
-					 handle_level_irq);
-		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
-	}
-
-	irq_set_chained_handler(BALLOON3_AUX_NIRQ, balloon3_irq_handler);
-	irq_set_irq_type(BALLOON3_AUX_NIRQ, IRQ_TYPE_EDGE_FALLING);
-
-	pr_debug("%s: chained handler installed - irq %d automatically "
-		"enabled\n", __func__, BALLOON3_AUX_NIRQ);
-}
-
-/******************************************************************************
- * GPIO expander
- ******************************************************************************/
-#if defined(CONFIG_GPIO_PCF857X) || defined(CONFIG_GPIO_PCF857X_MODULE)
-static struct pcf857x_platform_data balloon3_pcf857x_pdata = {
-	.gpio_base	= BALLOON3_PCF_GPIO_BASE,
-	.n_latch	= 0,
-	.setup		= NULL,
-	.teardown	= NULL,
-	.context	= NULL,
-};
-
-static struct i2c_board_info __initdata balloon3_i2c_devs[] = {
-	{
-		I2C_BOARD_INFO("pcf8574a", 0x38),
-		.platform_data	= &balloon3_pcf857x_pdata,
-	},
-};
-
-static void __init balloon3_i2c_init(void)
-{
-	pxa_set_i2c_info(NULL);
-	i2c_register_board_info(0, ARRAY_AND_SIZE(balloon3_i2c_devs));
-}
-#else
-static inline void balloon3_i2c_init(void) {}
-#endif
-
-/******************************************************************************
- * NAND
- ******************************************************************************/
-#if defined(CONFIG_MTD_NAND_PLATFORM)||defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
-static void balloon3_nand_cmd_ctl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
-{
-	struct nand_chip *this = mtd->priv;
-	uint8_t balloon3_ctl_set = 0, balloon3_ctl_clr = 0;
-
-	if (ctrl & NAND_CTRL_CHANGE) {
-		if (ctrl & NAND_CLE)
-			balloon3_ctl_set |= BALLOON3_NAND_CONTROL_FLCLE;
-		else
-			balloon3_ctl_clr |= BALLOON3_NAND_CONTROL_FLCLE;
-
-		if (ctrl & NAND_ALE)
-			balloon3_ctl_set |= BALLOON3_NAND_CONTROL_FLALE;
-		else
-			balloon3_ctl_clr |= BALLOON3_NAND_CONTROL_FLALE;
-
-		if (balloon3_ctl_clr)
-			__raw_writel(balloon3_ctl_clr,
-				BALLOON3_NAND_CONTROL_REG);
-		if (balloon3_ctl_set)
-			__raw_writel(balloon3_ctl_set,
-				BALLOON3_NAND_CONTROL_REG +
-				BALLOON3_FPGA_SETnCLR);
-	}
-
-	if (cmd != NAND_CMD_NONE)
-		writeb(cmd, this->IO_ADDR_W);
-}
-
-static void balloon3_nand_select_chip(struct mtd_info *mtd, int chip)
-{
-	if (chip < 0 || chip > 3)
-		return;
-
-	/* Assert all nCE lines */
-	__raw_writew(
-		BALLOON3_NAND_CONTROL_FLCE0 | BALLOON3_NAND_CONTROL_FLCE1 |
-		BALLOON3_NAND_CONTROL_FLCE2 | BALLOON3_NAND_CONTROL_FLCE3,
-		BALLOON3_NAND_CONTROL_REG + BALLOON3_FPGA_SETnCLR);
-
-	/* Deassert correct nCE line */
-	__raw_writew(BALLOON3_NAND_CONTROL_FLCE0 << chip,
-		BALLOON3_NAND_CONTROL_REG);
-}
-
-static int balloon3_nand_dev_ready(struct mtd_info *mtd)
-{
-	return __raw_readl(BALLOON3_NAND_STAT_REG) & BALLOON3_NAND_STAT_RNB;
-}
-
-static int balloon3_nand_probe(struct platform_device *pdev)
-{
-	uint16_t ver;
-	int ret;
-
-	__raw_writew(BALLOON3_NAND_CONTROL2_16BIT,
-		BALLOON3_NAND_CONTROL2_REG + BALLOON3_FPGA_SETnCLR);
-
-	ver = __raw_readw(BALLOON3_FPGA_VER);
-	if (ver < 0x4f08)
-		pr_warn("The FPGA code, version 0x%04x, is too old. "
-			"NAND support might be broken in this version!", ver);
-
-	/* Power up the NAND chips */
-	ret = gpio_request(BALLOON3_GPIO_RUN_NAND, "NAND");
-	if (ret)
-		goto err1;
-
-	ret = gpio_direction_output(BALLOON3_GPIO_RUN_NAND, 1);
-	if (ret)
-		goto err2;
-
-	gpio_set_value(BALLOON3_GPIO_RUN_NAND, 1);
-
-	/* Deassert all nCE lines and write protect line */
-	__raw_writel(
-		BALLOON3_NAND_CONTROL_FLCE0 | BALLOON3_NAND_CONTROL_FLCE1 |
-		BALLOON3_NAND_CONTROL_FLCE2 | BALLOON3_NAND_CONTROL_FLCE3 |
-		BALLOON3_NAND_CONTROL_FLWP,
-		BALLOON3_NAND_CONTROL_REG + BALLOON3_FPGA_SETnCLR);
-	return 0;
-
-err2:
-	gpio_free(BALLOON3_GPIO_RUN_NAND);
-err1:
-	return ret;
-}
-
-static void balloon3_nand_remove(struct platform_device *pdev)
-{
-	/* Power down the NAND chips */
-	gpio_set_value(BALLOON3_GPIO_RUN_NAND, 0);
-	gpio_free(BALLOON3_GPIO_RUN_NAND);
-}
-
-static struct mtd_partition balloon3_partition_info[] = {
-	[0] = {
-		.name	= "Boot",
-		.offset	= 0,
-		.size	= SZ_4M,
-	},
-	[1] = {
-		.name	= "RootFS",
-		.offset	= MTDPART_OFS_APPEND,
-		.size	= MTDPART_SIZ_FULL
-	},
-};
-
-static const char *balloon3_part_probes[] = { "cmdlinepart", NULL };
-
-struct platform_nand_data balloon3_nand_pdata = {
-	.chip = {
-		.nr_chips	= 4,
-		.chip_offset	= 0,
-		.nr_partitions	= ARRAY_SIZE(balloon3_partition_info),
-		.partitions	= balloon3_partition_info,
-		.chip_delay	= 50,
-		.part_probe_types = balloon3_part_probes,
-	},
-	.ctrl = {
-		.hwcontrol	= 0,
-		.dev_ready	= balloon3_nand_dev_ready,
-		.select_chip	= balloon3_nand_select_chip,
-		.cmd_ctrl	= balloon3_nand_cmd_ctl,
-		.probe		= balloon3_nand_probe,
-		.remove		= balloon3_nand_remove,
-	},
-};
-
-static struct resource balloon3_nand_resource[] = {
-	[0] = {
-		.start = BALLOON3_NAND_BASE,
-		.end   = BALLOON3_NAND_BASE + 0x4,
-		.flags = IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device balloon3_nand = {
-	.name		= "gen_nand",
-	.num_resources	= ARRAY_SIZE(balloon3_nand_resource),
-	.resource	= balloon3_nand_resource,
-	.id		= -1,
-	.dev		= {
-		.platform_data = &balloon3_nand_pdata,
-	}
-};
-
-static void __init balloon3_nand_init(void)
-{
-	platform_device_register(&balloon3_nand);
-}
-#else
-static inline void balloon3_nand_init(void) {}
-#endif
-
-/******************************************************************************
- * Core power regulator
- ******************************************************************************/
-#if defined(CONFIG_REGULATOR_MAX1586) || \
-    defined(CONFIG_REGULATOR_MAX1586_MODULE)
-static struct regulator_consumer_supply balloon3_max1587a_consumers[] = {
-	{
-		.supply	= "vcc_core",
-	}
-};
-
-static struct regulator_init_data balloon3_max1587a_v3_info = {
-	.constraints = {
-		.name		= "vcc_core range",
-		.min_uV		= 900000,
-		.max_uV		= 1705000,
-		.always_on	= 1,
-		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE,
-	},
-	.consumer_supplies	= balloon3_max1587a_consumers,
-	.num_consumer_supplies	= ARRAY_SIZE(balloon3_max1587a_consumers),
-};
-
-static struct max1586_subdev_data balloon3_max1587a_subdevs[] = {
-	{
-		.name		= "vcc_core",
-		.id		= MAX1586_V3,
-		.platform_data	= &balloon3_max1587a_v3_info,
-	}
-};
-
-static struct max1586_platform_data balloon3_max1587a_info = {
-	.subdevs     = balloon3_max1587a_subdevs,
-	.num_subdevs = ARRAY_SIZE(balloon3_max1587a_subdevs),
-	.v3_gain     = MAX1586_GAIN_R24_3k32, /* 730..1550 mV */
-};
-
-static struct i2c_board_info __initdata balloon3_pi2c_board_info[] = {
-	{
-		I2C_BOARD_INFO("max1586", 0x14),
-		.platform_data	= &balloon3_max1587a_info,
-	},
-};
-
-static void __init balloon3_pmic_init(void)
-{
-	pxa27x_set_i2c_power_info(NULL);
-	i2c_register_board_info(1, ARRAY_AND_SIZE(balloon3_pi2c_board_info));
-}
-#else
-static inline void balloon3_pmic_init(void) {}
-#endif
-
-/******************************************************************************
- * Machine init
- ******************************************************************************/
-static void __init balloon3_init(void)
-{
-	ARB_CNTRL = ARB_CORE_PARK | 0x234;
-
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_pin_config));
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	balloon3_i2c_init();
-	balloon3_irda_init();
-	balloon3_lcd_init();
-	balloon3_leds_init();
-	balloon3_mmc_init();
-	balloon3_nand_init();
-	balloon3_nor_init();
-	balloon3_pmic_init();
-	balloon3_ts_init();
-	balloon3_udc_init();
-	balloon3_uhc_init();
-	balloon3_cf_init();
-}
-
-static struct map_desc balloon3_io_desc[] __initdata = {
-	{	/* CPLD/FPGA */
-		.virtual	= (unsigned long)BALLOON3_FPGA_VIRT,
-		.pfn		= __phys_to_pfn(BALLOON3_FPGA_PHYS),
-		.length		= BALLOON3_FPGA_LENGTH,
-		.type		= MT_DEVICE,
-	},
-};
-
-static void __init balloon3_map_io(void)
-{
-	pxa27x_map_io();
-	iotable_init(balloon3_io_desc, ARRAY_SIZE(balloon3_io_desc));
-}
-
-MACHINE_START(BALLOON3, "Balloon3")
-	/* Maintainer: Nick Bane. */
-	.map_io		= balloon3_map_io,
-	.nr_irqs	= BALLOON3_NR_IRQS,
-	.init_irq	= balloon3_init_irq,
-	.handle_irq	= pxa27x_handle_irq,
-	.timer		= &pxa_timer,
-	.init_machine	= balloon3_init,
-	.atag_offset	= 0x100,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/capc7117.c b/ANDROID_3.4.5/arch/arm/mach-pxa/capc7117.c
deleted file mode 100644
index 9a8760b7..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/capc7117.c
+++ /dev/null
@@ -1,159 +0,0 @@
-/*
- * linux/arch/arm/mach-pxa/capc7117.c
- *
- * Support for the Embedian CAPC-7117 Evaluation Kit
- * based on the Embedian MXM-8x10 Computer on Module
- *
- * Copyright (C) 2009 Embedian Inc.
- * Copyright (C) 2009 TMT Services & Supplies (Pty) Ltd.
- *
- * 2007-09-04: eric miao <eric.y.miao@gmail.com>
- *             rewrite to align with latest kernel
- *
- * 2010-01-09: Edwin Peer <epeer@tmtservices.co.za>
- *             Hennie van der Merwe <hvdmerwe@tmtservices.co.za>
- *             rework for upstream merge
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/irq.h>
-#include <linux/platform_device.h>
-#include <linux/ata_platform.h>
-#include <linux/serial_8250.h>
-#include <linux/gpio.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include <mach/pxa320.h>
-#include <mach/mxm8x10.h>
-
-#include "generic.h"
-
-/* IDE (PATA) Support */
-static struct pata_platform_info pata_platform_data = {
-	.ioport_shift = 1
-};
-
-static struct resource capc7117_ide_resources[] = {
-	[0] = {
-	       .start = 0x11000020,
-	       .end = 0x1100003f,
-	       .flags = IORESOURCE_MEM
-	},
-	[1] = {
-	       .start = 0x1100001c,
-	       .end = 0x1100001c,
-	       .flags = IORESOURCE_MEM
-	},
-	[2] = {
-	       .start = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO76)),
-	       .end = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO76)),
-	       .flags = IORESOURCE_IRQ | IRQF_TRIGGER_RISING
-	}
-};
-
-static struct platform_device capc7117_ide_device = {
-	.name = "pata_platform",
-	.num_resources = ARRAY_SIZE(capc7117_ide_resources),
-	.resource = capc7117_ide_resources,
-	.dev = {
-		.platform_data = &pata_platform_data,
-		.coherent_dma_mask = ~0		/* grumble */
-	}
-};
-
-static void __init capc7117_ide_init(void)
-{
-	platform_device_register(&capc7117_ide_device);
-}
-
-/* TI16C752 UART support */
-#define	TI16C752_FLAGS		(UPF_BOOT_AUTOCONF | \
-					UPF_IOREMAP | \
-					UPF_BUGGY_UART | \
-					UPF_SKIP_TEST)
-#define	TI16C752_UARTCLK	(22118400)
-static struct plat_serial8250_port ti16c752_platform_data[] = {
-	[0] = {
-	       .mapbase = 0x14000000,
-	       .irq = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO78)),
-	       .irqflags = IRQF_TRIGGER_RISING,
-	       .flags = TI16C752_FLAGS,
-	       .iotype = UPIO_MEM,
-	       .regshift = 1,
-	       .uartclk = TI16C752_UARTCLK
-	},
-	[1] = {
-	       .mapbase = 0x14000040,
-	       .irq = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO79)),
-	       .irqflags = IRQF_TRIGGER_RISING,
-	       .flags = TI16C752_FLAGS,
-	       .iotype = UPIO_MEM,
-	       .regshift = 1,
-	       .uartclk = TI16C752_UARTCLK
-	},
-	[2] = {
-	       .mapbase = 0x14000080,
-	       .irq = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO80)),
-	       .irqflags = IRQF_TRIGGER_RISING,
-	       .flags = TI16C752_FLAGS,
-	       .iotype = UPIO_MEM,
-	       .regshift = 1,
-	       .uartclk = TI16C752_UARTCLK
-	},
-	[3] = {
-	       .mapbase = 0x140000c0,
-	       .irq = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO81)),
-	       .irqflags = IRQF_TRIGGER_RISING,
-	       .flags = TI16C752_FLAGS,
-	       .iotype = UPIO_MEM,
-	       .regshift = 1,
-	       .uartclk = TI16C752_UARTCLK
-	},
-	[4] = {
-	       /* end of array */
-	}
-};
-
-static struct platform_device ti16c752_device = {
-	.name = "serial8250",
-	.id = PLAT8250_DEV_PLATFORM,
-	.dev = {
-		.platform_data = ti16c752_platform_data
-	}
-};
-
-static void __init capc7117_uarts_init(void)
-{
-	platform_device_register(&ti16c752_device);
-}
-
-static void __init capc7117_init(void)
-{
-	/* Init CoM */
-	mxm_8x10_barebones_init();
-
-	/* Init evaluation board peripherals */
-	mxm_8x10_ac97_init();
-	mxm_8x10_usb_host_init();
-	mxm_8x10_mmc_init();
-
-	capc7117_uarts_init();
-	capc7117_ide_init();
-}
-
-MACHINE_START(CAPC7117,
-	      "Embedian CAPC-7117 evaluation kit based on the MXM-8x10 CoM")
-	.atag_offset = 0x100,
-	.map_io = pxa3xx_map_io,
-	.nr_irqs = PXA_NR_IRQS,
-	.init_irq = pxa3xx_init_irq,
-	.handle_irq = pxa3xx_handle_irq,
-	.timer = &pxa_timer,
-	.init_machine = capc7117_init,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/clock-pxa2xx.c b/ANDROID_3.4.5/arch/arm/mach-pxa/clock-pxa2xx.c
deleted file mode 100644
index 9ee2ad6a..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/clock-pxa2xx.c
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * linux/arch/arm/mach-pxa/clock-pxa2xx.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/syscore_ops.h>
-
-#include <mach/pxa2xx-regs.h>
-
-#include "clock.h"
-
-void clk_pxa2xx_cken_enable(struct clk *clk)
-{
-	CKEN |= 1 << clk->cken;
-}
-
-void clk_pxa2xx_cken_disable(struct clk *clk)
-{
-	CKEN &= ~(1 << clk->cken);
-}
-
-const struct clkops clk_pxa2xx_cken_ops = {
-	.enable		= clk_pxa2xx_cken_enable,
-	.disable	= clk_pxa2xx_cken_disable,
-};
-
-#ifdef CONFIG_PM
-static uint32_t saved_cken;
-
-static int pxa2xx_clock_suspend(void)
-{
-	saved_cken = CKEN;
-	return 0;
-}
-
-static void pxa2xx_clock_resume(void)
-{
-	CKEN = saved_cken;
-}
-#else
-#define pxa2xx_clock_suspend	NULL
-#define pxa2xx_clock_resume	NULL
-#endif
-
-struct syscore_ops pxa2xx_clock_syscore_ops = {
-	.suspend	= pxa2xx_clock_suspend,
-	.resume		= pxa2xx_clock_resume,
-};
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/clock-pxa3xx.c b/ANDROID_3.4.5/arch/arm/mach-pxa/clock-pxa3xx.c
deleted file mode 100644
index 2a37a9a8..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/clock-pxa3xx.c
+++ /dev/null
@@ -1,208 +0,0 @@
-/*
- * linux/arch/arm/mach-pxa/clock-pxa3xx.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/syscore_ops.h>
-
-#include <mach/smemc.h>
-#include <mach/pxa3xx-regs.h>
-
-#include "clock.h"
-
-/* Crystal clock: 13MHz */
-#define BASE_CLK	13000000
-
-/* Ring Oscillator Clock: 60MHz */
-#define RO_CLK		60000000
-
-#define ACCR_D0CS	(1 << 26)
-#define ACCR_PCCE	(1 << 11)
-
-/* crystal frequency to HSIO bus frequency multiplier (HSS) */
-static unsigned char hss_mult[4] = { 8, 12, 16, 24 };
-
-/*
- * Get the clock frequency as reflected by CCSR and the turbo flag.
- * We assume these values have been applied via a fcs.
- * If info is not 0 we also display the current settings.
- */
-unsigned int pxa3xx_get_clk_frequency_khz(int info)
-{
-	unsigned long acsr, xclkcfg;
-	unsigned int t, xl, xn, hss, ro, XL, XN, CLK, HSS;
-
-	/* Read XCLKCFG register turbo bit */
-	__asm__ __volatile__("mrc\tp14, 0, %0, c6, c0, 0" : "=r"(xclkcfg));
-	t = xclkcfg & 0x1;
-
-	acsr = ACSR;
-
-	xl  = acsr & 0x1f;
-	xn  = (acsr >> 8) & 0x7;
-	hss = (acsr >> 14) & 0x3;
-
-	XL = xl * BASE_CLK;
-	XN = xn * XL;
-
-	ro = acsr & ACCR_D0CS;
-
-	CLK = (ro) ? RO_CLK : ((t) ? XN : XL);
-	HSS = (ro) ? RO_CLK : hss_mult[hss] * BASE_CLK;
-
-	if (info) {
-		pr_info("RO Mode clock: %d.%02dMHz (%sactive)\n",
-			RO_CLK / 1000000, (RO_CLK % 1000000) / 10000,
-			(ro) ? "" : "in");
-		pr_info("Run Mode clock: %d.%02dMHz (*%d)\n",
-			XL / 1000000, (XL % 1000000) / 10000, xl);
-		pr_info("Turbo Mode clock: %d.%02dMHz (*%d, %sactive)\n",
-			XN / 1000000, (XN % 1000000) / 10000, xn,
-			(t) ? "" : "in");
-		pr_info("HSIO bus clock: %d.%02dMHz\n",
-			HSS / 1000000, (HSS % 1000000) / 10000);
-	}
-
-	return CLK / 1000;
-}
-
-/*
- * Return the current AC97 clock frequency.
- */
-static unsigned long clk_pxa3xx_ac97_getrate(struct clk *clk)
-{
-	unsigned long rate = 312000000;
-	unsigned long ac97_div;
-
-	ac97_div = AC97_DIV;
-
-	/* This may loose precision for some rates but won't for the
-	 * standard 24.576MHz.
-	 */
-	rate /= (ac97_div >> 12) & 0x7fff;
-	rate *= (ac97_div & 0xfff);
-
-	return rate;
-}
-
-/*
- * Return the current HSIO bus clock frequency
- */
-static unsigned long clk_pxa3xx_hsio_getrate(struct clk *clk)
-{
-	unsigned long acsr;
-	unsigned int hss, hsio_clk;
-
-	acsr = ACSR;
-
-	hss = (acsr >> 14) & 0x3;
-	hsio_clk = (acsr & ACCR_D0CS) ? RO_CLK : hss_mult[hss] * BASE_CLK;
-
-	return hsio_clk;
-}
-
-/* crystal frequency to static memory controller multiplier (SMCFS) */
-static unsigned int smcfs_mult[8] = { 6, 0, 8, 0, 0, 16, };
-static unsigned int df_clkdiv[4] = { 1, 2, 4, 1 };
-
-static unsigned long clk_pxa3xx_smemc_getrate(struct clk *clk)
-{
-	unsigned long acsr = ACSR;
-	unsigned long memclkcfg = __raw_readl(MEMCLKCFG);
-
-	return BASE_CLK * smcfs_mult[(acsr >> 23) & 0x7] /
-			df_clkdiv[(memclkcfg >> 16) & 0x3];
-}
-
-void clk_pxa3xx_cken_enable(struct clk *clk)
-{
-	unsigned long mask = 1ul << (clk->cken & 0x1f);
-
-	if (clk->cken < 32)
-		CKENA |= mask;
-	else
-		CKENB |= mask;
-}
-
-void clk_pxa3xx_cken_disable(struct clk *clk)
-{
-	unsigned long mask = 1ul << (clk->cken & 0x1f);
-
-	if (clk->cken < 32)
-		CKENA &= ~mask;
-	else
-		CKENB &= ~mask;
-}
-
-const struct clkops clk_pxa3xx_cken_ops = {
-	.enable		= clk_pxa3xx_cken_enable,
-	.disable	= clk_pxa3xx_cken_disable,
-};
-
-const struct clkops clk_pxa3xx_hsio_ops = {
-	.enable		= clk_pxa3xx_cken_enable,
-	.disable	= clk_pxa3xx_cken_disable,
-	.getrate	= clk_pxa3xx_hsio_getrate,
-};
-
-const struct clkops clk_pxa3xx_ac97_ops = {
-	.enable		= clk_pxa3xx_cken_enable,
-	.disable	= clk_pxa3xx_cken_disable,
-	.getrate	= clk_pxa3xx_ac97_getrate,
-};
-
-const struct clkops clk_pxa3xx_smemc_ops = {
-	.enable		= clk_pxa3xx_cken_enable,
-	.disable	= clk_pxa3xx_cken_disable,
-	.getrate	= clk_pxa3xx_smemc_getrate,
-};
-
-static void clk_pout_enable(struct clk *clk)
-{
-	OSCC |= OSCC_PEN;
-}
-
-static void clk_pout_disable(struct clk *clk)
-{
-	OSCC &= ~OSCC_PEN;
-}
-
-const struct clkops clk_pxa3xx_pout_ops = {
-	.enable		= clk_pout_enable,
-	.disable	= clk_pout_disable,
-};
-
-#ifdef CONFIG_PM
-static uint32_t cken[2];
-static uint32_t accr;
-
-static int pxa3xx_clock_suspend(void)
-{
-	cken[0] = CKENA;
-	cken[1] = CKENB;
-	accr = ACCR;
-	return 0;
-}
-
-static void pxa3xx_clock_resume(void)
-{
-	ACCR = accr;
-	CKENA = cken[0];
-	CKENB = cken[1];
-}
-#else
-#define pxa3xx_clock_suspend	NULL
-#define pxa3xx_clock_resume	NULL
-#endif
-
-struct syscore_ops pxa3xx_clock_syscore_ops = {
-	.suspend	= pxa3xx_clock_suspend,
-	.resume		= pxa3xx_clock_resume,
-};
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/clock.c b/ANDROID_3.4.5/arch/arm/mach-pxa/clock.c
deleted file mode 100644
index 4d466102..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/clock.c
+++ /dev/null
@@ -1,86 +0,0 @@
-/*
- *  linux/arch/arm/mach-sa1100/clock.c
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/clk.h>
-#include <linux/spinlock.h>
-#include <linux/delay.h>
-#include <linux/clkdev.h>
-
-#include "clock.h"
-
-static DEFINE_SPINLOCK(clocks_lock);
-
-int clk_enable(struct clk *clk)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&clocks_lock, flags);
-	if (clk->enabled++ == 0)
-		clk->ops->enable(clk);
-	spin_unlock_irqrestore(&clocks_lock, flags);
-
-	if (clk->delay)
-		udelay(clk->delay);
-
-	return 0;
-}
-EXPORT_SYMBOL(clk_enable);
-
-void clk_disable(struct clk *clk)
-{
-	unsigned long flags;
-
-	WARN_ON(clk->enabled == 0);
-
-	spin_lock_irqsave(&clocks_lock, flags);
-	if (--clk->enabled == 0)
-		clk->ops->disable(clk);
-	spin_unlock_irqrestore(&clocks_lock, flags);
-}
-EXPORT_SYMBOL(clk_disable);
-
-unsigned long clk_get_rate(struct clk *clk)
-{
-	unsigned long rate;
-
-	rate = clk->rate;
-	if (clk->ops->getrate)
-		rate = clk->ops->getrate(clk);
-
-	return rate;
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
-	unsigned long flags;
-	int ret = -EINVAL;
-
-	if (clk->ops->setrate) {
-		spin_lock_irqsave(&clocks_lock, flags);
-		ret = clk->ops->setrate(clk, rate);
-		spin_unlock_irqrestore(&clocks_lock, flags);
-	}
-
-	return ret;
-}
-EXPORT_SYMBOL(clk_set_rate);
-
-void clk_dummy_enable(struct clk *clk)
-{
-}
-
-void clk_dummy_disable(struct clk *clk)
-{
-}
-
-const struct clkops clk_dummy_ops = {
-	.enable		= clk_dummy_enable,
-	.disable	= clk_dummy_disable,
-};
-
-struct clk clk_dummy = {
-	.ops		= &clk_dummy_ops,
-};
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/clock.h b/ANDROID_3.4.5/arch/arm/mach-pxa/clock.h
deleted file mode 100644
index 3a258b1b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/clock.h
+++ /dev/null
@@ -1,80 +0,0 @@
-#include <linux/clkdev.h>
-#include <linux/syscore_ops.h>
-
-struct clkops {
-	void			(*enable)(struct clk *);
-	void			(*disable)(struct clk *);
-	unsigned long		(*getrate)(struct clk *);
-	int			(*setrate)(struct clk *, unsigned long);
-};
-
-struct clk {
-	const struct clkops	*ops;
-	unsigned long		rate;
-	unsigned int		cken;
-	unsigned int		delay;
-	unsigned int		enabled;
-};
-
-void clk_dummy_enable(struct clk *);
-void clk_dummy_disable(struct clk *);
-
-extern const struct clkops clk_dummy_ops;
-extern struct clk clk_dummy;
-
-#define INIT_CLKREG(_clk,_devname,_conname)		\
-	{						\
-		.clk		= _clk,			\
-		.dev_id		= _devname,		\
-		.con_id		= _conname,		\
-	}
-
-#define DEFINE_CK(_name, _cken, _ops)			\
-struct clk clk_##_name = {				\
-		.ops	= _ops,				\
-		.cken	= CKEN_##_cken,			\
-	}
-
-#define DEFINE_CLK(_name, _ops, _rate, _delay)		\
-struct clk clk_##_name = {				\
-		.ops	= _ops, 			\
-		.rate	= _rate,			\
-		.delay	= _delay,			\
-	}
-
-#define DEFINE_PXA2_CKEN(_name, _cken, _rate, _delay)	\
-struct clk clk_##_name = {				\
-		.ops	= &clk_pxa2xx_cken_ops,		\
-		.rate	= _rate,			\
-		.cken	= CKEN_##_cken,			\
-		.delay	= _delay,			\
-	}
-
-extern const struct clkops clk_pxa2xx_cken_ops;
-
-void clk_pxa2xx_cken_enable(struct clk *clk);
-void clk_pxa2xx_cken_disable(struct clk *clk);
-
-extern struct syscore_ops pxa2xx_clock_syscore_ops;
-
-#if defined(CONFIG_PXA3xx) || defined(CONFIG_PXA95x)
-#define DEFINE_PXA3_CKEN(_name, _cken, _rate, _delay)	\
-struct clk clk_##_name = {				\
-		.ops	= &clk_pxa3xx_cken_ops,		\
-		.rate	= _rate,			\
-		.cken	= CKEN_##_cken,			\
-		.delay	= _delay,			\
-	}
-
-extern const struct clkops clk_pxa3xx_cken_ops;
-extern const struct clkops clk_pxa3xx_hsio_ops;
-extern const struct clkops clk_pxa3xx_ac97_ops;
-extern const struct clkops clk_pxa3xx_pout_ops;
-extern const struct clkops clk_pxa3xx_smemc_ops;
-
-extern void clk_pxa3xx_cken_enable(struct clk *);
-extern void clk_pxa3xx_cken_disable(struct clk *);
-
-extern struct syscore_ops pxa3xx_clock_syscore_ops;
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/cm-x255.c b/ANDROID_3.4.5/arch/arm/mach-pxa/cm-x255.c
deleted file mode 100644
index be751470..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/cm-x255.c
+++ /dev/null
@@ -1,236 +0,0 @@
-/*
- * linux/arch/arm/mach-pxa/cm-x255.c
- *
- * Copyright (C) 2007, 2008 CompuLab, Ltd.
- * Mike Rapoport <mike@compulab.co.il>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/platform_device.h>
-#include <linux/irq.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/nand-gpio.h>
-
-#include <linux/spi/spi.h>
-#include <linux/spi/pxa2xx_spi.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-#include <asm/mach/map.h>
-
-#include <mach/pxa25x.h>
-
-#include "generic.h"
-
-#define GPIO_NAND_CS	(5)
-#define GPIO_NAND_ALE	(4)
-#define GPIO_NAND_CLE	(3)
-#define GPIO_NAND_RB	(10)
-
-static unsigned long cmx255_pin_config[] = {
-	/* AC'97 */
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-
-	/* BTUART */
-	GPIO42_BTUART_RXD,
-	GPIO43_BTUART_TXD,
-	GPIO44_BTUART_CTS,
-	GPIO45_BTUART_RTS,
-
-	/* STUART */
-	GPIO46_STUART_RXD,
-	GPIO47_STUART_TXD,
-
-	/* LCD */
-	GPIOxx_LCD_TFT_16BPP,
-
-	/* SSP1 */
-	GPIO23_SSP1_SCLK,
-	GPIO24_SSP1_SFRM,
-	GPIO25_SSP1_TXD,
-	GPIO26_SSP1_RXD,
-
-	/* SSP2 */
-	GPIO81_SSP2_CLK_OUT,
-	GPIO82_SSP2_FRM_OUT,
-	GPIO83_SSP2_TXD,
-	GPIO84_SSP2_RXD,
-
-	/* PC Card */
-	GPIO48_nPOE,
-	GPIO49_nPWE,
-	GPIO50_nPIOR,
-	GPIO51_nPIOW,
-	GPIO52_nPCE_1,
-	GPIO53_nPCE_2,
-	GPIO54_nPSKTSEL,
-	GPIO55_nPREG,
-	GPIO56_nPWAIT,
-	GPIO57_nIOIS16,
-
-	/* SDRAM and local bus */
-	GPIO15_nCS_1,
-	GPIO78_nCS_2,
-	GPIO79_nCS_3,
-	GPIO80_nCS_4,
-	GPIO33_nCS_5,
-	GPIO18_RDY,
-
-	/* GPIO */
-	GPIO0_GPIO	| WAKEUP_ON_EDGE_BOTH,
-	GPIO9_GPIO,				/* PC card reset */
-
-	/* NAND controls */
-	GPIO5_GPIO	| MFP_LPM_DRIVE_HIGH,	/* NAND CE# */
-	GPIO4_GPIO	| MFP_LPM_DRIVE_LOW,	/* NAND ALE */
-	GPIO3_GPIO	| MFP_LPM_DRIVE_LOW,	/* NAND CLE */
-	GPIO10_GPIO,				/* NAND Ready/Busy */
-
-	/* interrupts */
-	GPIO22_GPIO,	/* DM9000 interrupt */
-};
-
-#if defined(CONFIG_SPI_PXA2XX)
-static struct pxa2xx_spi_master pxa_ssp_master_info = {
-	.num_chipselect	= 1,
-};
-
-static struct spi_board_info spi_board_info[] __initdata = {
-	[0] = {
-		.modalias	= "rtc-max6902",
-		.max_speed_hz	= 1000000,
-		.bus_num	= 1,
-		.chip_select	= 0,
-	},
-};
-
-static void __init cmx255_init_rtc(void)
-{
-	pxa2xx_set_spi_info(1, &pxa_ssp_master_info);
-	spi_register_board_info(ARRAY_AND_SIZE(spi_board_info));
-}
-#else
-static inline void cmx255_init_rtc(void) {}
-#endif
-
-#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
-static struct mtd_partition cmx255_nor_partitions[] = {
-	{
-		.name		= "ARMmon",
-		.size		= 0x00030000,
-		.offset		= 0,
-		.mask_flags	= MTD_WRITEABLE  /* force read-only */
-	} , {
-		.name		= "ARMmon setup block",
-		.size		= 0x00010000,
-		.offset		= MTDPART_OFS_APPEND,
-		.mask_flags	= MTD_WRITEABLE  /* force read-only */
-	} , {
-		.name		= "kernel",
-		.size		= 0x00160000,
-		.offset		= MTDPART_OFS_APPEND,
-	} , {
-		.name		= "ramdisk",
-		.size		= MTDPART_SIZ_FULL,
-		.offset		= MTDPART_OFS_APPEND
-	}
-};
-
-static struct physmap_flash_data cmx255_nor_flash_data[] = {
-	{
-		.width		= 2,	/* bankwidth in bytes */
-		.parts		= cmx255_nor_partitions,
-		.nr_parts	= ARRAY_SIZE(cmx255_nor_partitions)
-	}
-};
-
-static struct resource cmx255_nor_resource = {
-	.start	= PXA_CS0_PHYS,
-	.end	= PXA_CS0_PHYS + SZ_8M - 1,
-	.flags	= IORESOURCE_MEM,
-};
-
-static struct platform_device cmx255_nor = {
-	.name	= "physmap-flash",
-	.id	= -1,
-	.dev	= {
-		.platform_data = cmx255_nor_flash_data,
-	},
-	.resource = &cmx255_nor_resource,
-	.num_resources = 1,
-};
-
-static void __init cmx255_init_nor(void)
-{
-	platform_device_register(&cmx255_nor);
-}
-#else
-static inline void cmx255_init_nor(void) {}
-#endif
-
-#if defined(CONFIG_MTD_NAND_GPIO) || defined(CONFIG_MTD_NAND_GPIO_MODULE)
-static struct resource cmx255_nand_resource[] = {
-	[0] = {
-		.start = PXA_CS1_PHYS,
-		.end   = PXA_CS1_PHYS + 11,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = PXA_CS5_PHYS,
-		.end   = PXA_CS5_PHYS + 3,
-		.flags = IORESOURCE_MEM,
-	},
-};
-
-static struct mtd_partition cmx255_nand_parts[] = {
-	[0] = {
-		.name	= "cmx255-nand",
-		.size	= MTDPART_SIZ_FULL,
-		.offset	= 0,
-	},
-};
-
-static struct gpio_nand_platdata cmx255_nand_platdata = {
-	.gpio_nce = GPIO_NAND_CS,
-	.gpio_cle = GPIO_NAND_CLE,
-	.gpio_ale = GPIO_NAND_ALE,
-	.gpio_rdy = GPIO_NAND_RB,
-	.gpio_nwp = -1,
-	.parts = cmx255_nand_parts,
-	.num_parts = ARRAY_SIZE(cmx255_nand_parts),
-	.chip_delay = 25,
-};
-
-static struct platform_device cmx255_nand = {
-	.name		= "gpio-nand",
-	.num_resources	= ARRAY_SIZE(cmx255_nand_resource),
-	.resource	= cmx255_nand_resource,
-	.id		= -1,
-	.dev		= {
-		.platform_data = &cmx255_nand_platdata,
-	}
-};
-
-static void __init cmx255_init_nand(void)
-{
-	platform_device_register(&cmx255_nand);
-}
-#else
-static inline void cmx255_init_nand(void) {}
-#endif
-
-void __init cmx255_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(cmx255_pin_config));
-
-	cmx255_init_rtc();
-	cmx255_init_nor();
-	cmx255_init_nand();
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/cm-x270.c b/ANDROID_3.4.5/arch/arm/mach-pxa/cm-x270.c
deleted file mode 100644
index 431ef567..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/cm-x270.c
+++ /dev/null
@@ -1,412 +0,0 @@
-/*
- * linux/arch/arm/mach-pxa/cm-x270.c
- *
- * Copyright (C) 2007, 2008 CompuLab, Ltd.
- * Mike Rapoport <mike@compulab.co.il>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/platform_device.h>
-#include <linux/irq.h>
-#include <linux/gpio.h>
-#include <linux/delay.h>
-
-#include <linux/rtc-v3020.h>
-#include <video/mbxfb.h>
-
-#include <linux/spi/spi.h>
-#include <linux/spi/pxa2xx_spi.h>
-#include <linux/spi/libertas_spi.h>
-
-#include <mach/pxa27x.h>
-#include <mach/ohci.h>
-#include <mach/mmc.h>
-
-#include "generic.h"
-
-/* physical address if local-bus attached devices */
-#define RTC_PHYS_BASE		(PXA_CS1_PHYS + (5 << 22))
-
-/* GPIO IRQ usage */
-#define GPIO83_MMC_IRQ		(83)
-
-#define CMX270_MMC_IRQ		PXA_GPIO_TO_IRQ(GPIO83_MMC_IRQ)
-
-/* MMC power enable */
-#define GPIO105_MMC_POWER	(105)
-
-/* WLAN GPIOS */
-#define GPIO19_WLAN_STRAP	(19)
-#define GPIO102_WLAN_RST	(102)
-
-static unsigned long cmx270_pin_config[] = {
-	/* AC'97 */
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-	GPIO98_AC97_SYSCLK,
-	GPIO113_AC97_nRESET,
-
-	/* BTUART */
-	GPIO42_BTUART_RXD,
-	GPIO43_BTUART_TXD,
-	GPIO44_BTUART_CTS,
-	GPIO45_BTUART_RTS,
-
-	/* STUART */
-	GPIO46_STUART_RXD,
-	GPIO47_STUART_TXD,
-
-	/* MCI controller */
-	GPIO32_MMC_CLK,
-	GPIO112_MMC_CMD,
-	GPIO92_MMC_DAT_0,
-	GPIO109_MMC_DAT_1,
-	GPIO110_MMC_DAT_2,
-	GPIO111_MMC_DAT_3,
-
-	/* LCD */
-	GPIOxx_LCD_TFT_16BPP,
-
-	/* I2C */
-	GPIO117_I2C_SCL,
-	GPIO118_I2C_SDA,
-
-	/* SSP1 */
-	GPIO23_SSP1_SCLK,
-	GPIO24_SSP1_SFRM,
-	GPIO25_SSP1_TXD,
-	GPIO26_SSP1_RXD,
-
-	/* SSP2 */
-	GPIO19_GPIO,	/* SSP2 clock is used as GPIO for Libertas pin-strap */
-	GPIO14_GPIO,
-	GPIO87_SSP2_TXD,
-	GPIO88_SSP2_RXD,
-
-	/* PC Card */
-	GPIO48_nPOE,
-	GPIO49_nPWE,
-	GPIO50_nPIOR,
-	GPIO51_nPIOW,
-	GPIO85_nPCE_1,
-	GPIO54_nPCE_2,
-	GPIO55_nPREG,
-	GPIO56_nPWAIT,
-	GPIO57_nIOIS16,
-
-	/* SDRAM and local bus */
-	GPIO15_nCS_1,
-	GPIO78_nCS_2,
-	GPIO79_nCS_3,
-	GPIO80_nCS_4,
-	GPIO33_nCS_5,
-	GPIO49_nPWE,
-	GPIO18_RDY,
-
-	/* GPIO */
-	GPIO0_GPIO	| WAKEUP_ON_EDGE_BOTH,
-	GPIO105_GPIO	| MFP_LPM_DRIVE_HIGH,	/* MMC/SD power */
-	GPIO53_GPIO,				/* PC card reset */
-	GPIO102_GPIO,				/* WLAN reset */
-
-	/* NAND controls */
-	GPIO11_GPIO	| MFP_LPM_DRIVE_HIGH,	/* NAND CE# */
-	GPIO89_GPIO,				/* NAND Ready/Busy */
-
-	/* interrupts */
-	GPIO10_GPIO,	/* DM9000 interrupt */
-	GPIO83_GPIO,	/* MMC card detect */
-	GPIO95_GPIO,	/* WLAN interrupt */
-};
-
-/* V3020 RTC */
-#if defined(CONFIG_RTC_DRV_V3020) || defined(CONFIG_RTC_DRV_V3020_MODULE)
-static struct resource cmx270_v3020_resource[] = {
-	[0] = {
-		.start = RTC_PHYS_BASE,
-		.end   = RTC_PHYS_BASE + 4,
-		.flags = IORESOURCE_MEM,
-	},
-};
-
-struct v3020_platform_data cmx270_v3020_pdata = {
-	.leftshift = 16,
-};
-
-static struct platform_device cmx270_rtc_device = {
-	.name		= "v3020",
-	.num_resources	= ARRAY_SIZE(cmx270_v3020_resource),
-	.resource	= cmx270_v3020_resource,
-	.id		= -1,
-	.dev		= {
-		.platform_data = &cmx270_v3020_pdata,
-	}
-};
-
-static void __init cmx270_init_rtc(void)
-{
-	platform_device_register(&cmx270_rtc_device);
-}
-#else
-static inline void cmx270_init_rtc(void) {}
-#endif
-
-/* 2700G graphics */
-#if defined(CONFIG_FB_MBX) || defined(CONFIG_FB_MBX_MODULE)
-static u64 fb_dma_mask = ~(u64)0;
-
-static struct resource cmx270_2700G_resource[] = {
-	/* frame buffer memory including ODFB and External SDRAM */
-	[0] = {
-		.start = PXA_CS2_PHYS,
-		.end   = PXA_CS2_PHYS + 0x01ffffff,
-		.flags = IORESOURCE_MEM,
-	},
-	/* Marathon registers */
-	[1] = {
-		.start = PXA_CS2_PHYS + 0x03fe0000,
-		.end   = PXA_CS2_PHYS + 0x03ffffff,
-		.flags = IORESOURCE_MEM,
-	},
-};
-
-static unsigned long cmx270_marathon_on[] = {
-	GPIO58_GPIO,
-	GPIO59_GPIO,
-	GPIO60_GPIO,
-	GPIO61_GPIO,
-	GPIO62_GPIO,
-	GPIO63_GPIO,
-	GPIO64_GPIO,
-	GPIO65_GPIO,
-	GPIO66_GPIO,
-	GPIO67_GPIO,
-	GPIO68_GPIO,
-	GPIO69_GPIO,
-	GPIO70_GPIO,
-	GPIO71_GPIO,
-	GPIO72_GPIO,
-	GPIO73_GPIO,
-	GPIO74_GPIO,
-	GPIO75_GPIO,
-	GPIO76_GPIO,
-	GPIO77_GPIO,
-};
-
-static unsigned long cmx270_marathon_off[] = {
-	GPIOxx_LCD_TFT_16BPP,
-};
-
-static int cmx270_marathon_probe(struct fb_info *fb)
-{
-	int gpio, err;
-
-	for (gpio = 58; gpio <= 77; gpio++) {
-		err = gpio_request(gpio, "LCD");
-		if (err)
-			return err;
-		gpio_direction_input(gpio);
-	}
-
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(cmx270_marathon_on));
-	return 0;
-}
-
-static int cmx270_marathon_remove(struct fb_info *fb)
-{
-	int gpio;
-
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(cmx270_marathon_off));
-
-	for (gpio = 58; gpio <= 77; gpio++)
-		gpio_free(gpio);
-
-	return 0;
-}
-
-static struct mbxfb_platform_data cmx270_2700G_data = {
-	.xres = {
-		.min = 240,
-		.max = 1200,
-		.defval = 640,
-	},
-	.yres = {
-		.min = 240,
-		.max = 1200,
-		.defval = 480,
-	},
-	.bpp = {
-		.min = 16,
-		.max = 32,
-		.defval = 16,
-	},
-	.memsize = 8*1024*1024,
-	.probe = cmx270_marathon_probe,
-	.remove = cmx270_marathon_remove,
-};
-
-static struct platform_device cmx270_2700G = {
-	.name		= "mbx-fb",
-	.dev		= {
-		.platform_data	= &cmx270_2700G_data,
-		.dma_mask	= &fb_dma_mask,
-		.coherent_dma_mask = 0xffffffff,
-	},
-	.num_resources	= ARRAY_SIZE(cmx270_2700G_resource),
-	.resource	= cmx270_2700G_resource,
-	.id		= -1,
-};
-
-static void __init cmx270_init_2700G(void)
-{
-	platform_device_register(&cmx270_2700G);
-}
-#else
-static inline void cmx270_init_2700G(void) {}
-#endif
-
-/* PXA27x OHCI controller setup */
-#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-static struct pxaohci_platform_data cmx270_ohci_platform_data = {
-	.port_mode	= PMM_PERPORT_MODE,
-	.flags		= ENABLE_PORT1 | ENABLE_PORT2 | POWER_CONTROL_LOW,
-};
-
-static void __init cmx270_init_ohci(void)
-{
-	pxa_set_ohci_info(&cmx270_ohci_platform_data);
-}
-#else
-static inline void cmx270_init_ohci(void) {}
-#endif
-
-#if defined(CONFIG_MMC) || defined(CONFIG_MMC_MODULE)
-static struct pxamci_platform_data cmx270_mci_platform_data = {
-	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
-	.gpio_card_detect	= GPIO83_MMC_IRQ,
-	.gpio_card_ro		= -1,
-	.gpio_power		= GPIO105_MMC_POWER,
-	.gpio_power_invert	= 1,
-};
-
-static void __init cmx270_init_mmc(void)
-{
-	pxa_set_mci_info(&cmx270_mci_platform_data);
-}
-#else
-static inline void cmx270_init_mmc(void) {}
-#endif
-
-#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE)
-static struct pxa2xx_spi_master cm_x270_spi_info = {
-	.num_chipselect	= 1,
-	.enable_dma	= 1,
-};
-
-static struct pxa2xx_spi_chip cm_x270_libertas_chip = {
-	.rx_threshold	= 1,
-	.tx_threshold	= 1,
-	.timeout	= 1000,
-	.gpio_cs	= 14,
-};
-
-static unsigned long cm_x270_libertas_pin_config[] = {
-	/* SSP2 */
-	GPIO19_SSP2_SCLK,
-	GPIO14_GPIO,
-	GPIO87_SSP2_TXD,
-	GPIO88_SSP2_RXD,
-
-};
-
-static int cm_x270_libertas_setup(struct spi_device *spi)
-{
-	int err = gpio_request(GPIO19_WLAN_STRAP, "WLAN STRAP");
-	if (err)
-		return err;
-
-	err = gpio_request(GPIO102_WLAN_RST, "WLAN RST");
-	if (err)
-		goto err_free_strap;
-
-	err = gpio_direction_output(GPIO102_WLAN_RST, 0);
-	if (err)
-		goto err_free_strap;
-	msleep(100);
-
-	err = gpio_direction_output(GPIO19_WLAN_STRAP, 1);
-	if (err)
-		goto err_free_strap;
-	msleep(100);
-
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(cm_x270_libertas_pin_config));
-
-	gpio_set_value(GPIO102_WLAN_RST, 1);
-	msleep(100);
-
-	spi->bits_per_word = 16;
-	spi_setup(spi);
-
-	return 0;
-
-err_free_strap:
-	gpio_free(GPIO19_WLAN_STRAP);
-
-	return err;
-}
-
-static int cm_x270_libertas_teardown(struct spi_device *spi)
-{
-	gpio_set_value(GPIO102_WLAN_RST, 0);
-	gpio_free(GPIO102_WLAN_RST);
-	gpio_free(GPIO19_WLAN_STRAP);
-
-	return 0;
-}
-
-struct libertas_spi_platform_data cm_x270_libertas_pdata = {
-	.use_dummy_writes	= 1,
-	.setup			= cm_x270_libertas_setup,
-	.teardown		= cm_x270_libertas_teardown,
-};
-
-static struct spi_board_info cm_x270_spi_devices[] __initdata = {
-	{
-		.modalias		= "libertas_spi",
-		.max_speed_hz		= 13000000,
-		.bus_num		= 2,
-		.irq			= PXA_GPIO_TO_IRQ(95),
-		.chip_select		= 0,
-		.controller_data	= &cm_x270_libertas_chip,
-		.platform_data		= &cm_x270_libertas_pdata,
-	},
-};
-
-static void __init cmx270_init_spi(void)
-{
-	pxa2xx_set_spi_info(2, &cm_x270_spi_info);
-	spi_register_board_info(ARRAY_AND_SIZE(cm_x270_spi_devices));
-}
-#else
-static inline void cmx270_init_spi(void) {}
-#endif
-
-void __init cmx270_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(cmx270_pin_config));
-
-#ifdef CONFIG_PM
-	pxa27x_set_pwrmode(PWRMODE_DEEPSLEEP);
-#endif
-
-	cmx270_init_rtc();
-	cmx270_init_mmc();
-	cmx270_init_ohci();
-	cmx270_init_2700G();
-	cmx270_init_spi();
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/cm-x2xx-pci.c b/ANDROID_3.4.5/arch/arm/mach-pxa/cm-x2xx-pci.c
deleted file mode 100644
index ebd9259f..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/cm-x2xx-pci.c
+++ /dev/null
@@ -1,200 +0,0 @@
-/*
- * linux/arch/arm/mach-pxa/cm-x2xx-pci.c
- *
- * PCI bios-type initialisation for PCI machines
- *
- * Bits taken from various places.
- *
- * Copyright (C) 2007, 2008 Compulab, Ltd.
- * Mike Rapoport <mike@compulab.co.il>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/irq.h>
-#include <linux/gpio.h>
-
-#include <asm/mach/pci.h>
-#include <asm/mach-types.h>
-
-#include <asm/hardware/it8152.h>
-
-void __iomem *it8152_base_address;
-static int cmx2xx_it8152_irq_gpio;
-
-static void cmx2xx_it8152_irq_demux(unsigned int irq, struct irq_desc *desc)
-{
-	/* clear our parent irq */
-	desc->irq_data.chip->irq_ack(&desc->irq_data);
-
-	it8152_irq_demux(irq, desc);
-}
-
-void __cmx2xx_pci_init_irq(int irq_gpio)
-{
-	it8152_init_irq();
-
-	cmx2xx_it8152_irq_gpio = irq_gpio;
-
-	irq_set_irq_type(gpio_to_irq(irq_gpio), IRQ_TYPE_EDGE_RISING);
-
-	irq_set_chained_handler(gpio_to_irq(irq_gpio),
-				cmx2xx_it8152_irq_demux);
-}
-
-#ifdef CONFIG_PM
-static unsigned long sleep_save_ite[10];
-
-void __cmx2xx_pci_suspend(void)
-{
-	/* save ITE state */
-	sleep_save_ite[0] = __raw_readl(IT8152_INTC_PDCNIMR);
-	sleep_save_ite[1] = __raw_readl(IT8152_INTC_LPCNIMR);
-	sleep_save_ite[2] = __raw_readl(IT8152_INTC_LPNIAR);
-
-	/* Clear ITE IRQ's */
-	__raw_writel((0), IT8152_INTC_PDCNIRR);
-	__raw_writel((0), IT8152_INTC_LPCNIRR);
-}
-
-void __cmx2xx_pci_resume(void)
-{
-	/* restore IT8152 state */
-	__raw_writel((sleep_save_ite[0]), IT8152_INTC_PDCNIMR);
-	__raw_writel((sleep_save_ite[1]), IT8152_INTC_LPCNIMR);
-	__raw_writel((sleep_save_ite[2]), IT8152_INTC_LPNIAR);
-}
-#else
-void cmx2xx_pci_suspend(void) {}
-void cmx2xx_pci_resume(void) {}
-#endif
-
-/* PCI IRQ mapping*/
-static int __init cmx2xx_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	int irq;
-
-	dev_dbg(&dev->dev, "%s: slot=%x, pin=%x\n", __func__, slot, pin);
-
-	irq = it8152_pci_map_irq(dev, slot, pin);
-	if (irq)
-		return irq;
-
-	/*
-	  Here comes the ugly part. The routing is baseboard specific,
-	  but defining a platform for each possible base of CM-X2XX is
-	  unrealistic. Here we keep mapping for ATXBase and SB-X2XX.
-	*/
-	/* ATXBASE PCI slot */
-	if (slot == 7)
-		return IT8152_PCI_INTA;
-
-	/* ATXBase/SB-X2XX CardBus */
-	if (slot == 8 || slot == 0)
-		return IT8152_PCI_INTB;
-
-	/* ATXBase Ethernet */
-	if (slot == 9)
-		return IT8152_PCI_INTA;
-
-	/* CM-x255 Onboard Ethernet */
-	if (slot == 15)
-		return IT8152_PCI_INTC;
-
-	/* SB-x2xx Ethernet */
-	if (slot == 16)
-		return IT8152_PCI_INTA;
-
-	/* PC104+ interrupt routing */
-	if ((slot == 17) || (slot == 19))
-		return IT8152_PCI_INTA;
-	if ((slot == 18) || (slot == 20))
-		return IT8152_PCI_INTB;
-
-	return(0);
-}
-
-static void cmx2xx_pci_preinit(void)
-{
-	pr_info("Initializing CM-X2XX PCI subsystem\n");
-
-	pcibios_min_io = 0;
-	pcibios_min_mem = 0;
-
-	__raw_writel(0x800, IT8152_PCI_CFG_ADDR);
-	if (__raw_readl(IT8152_PCI_CFG_DATA) == 0x81521283) {
-		pr_info("PCI Bridge found.\n");
-
-		/* set PCI I/O base at 0 */
-		writel(0x848, IT8152_PCI_CFG_ADDR);
-		writel(0, IT8152_PCI_CFG_DATA);
-
-		/* set PCI memory base at 0 */
-		writel(0x840, IT8152_PCI_CFG_ADDR);
-		writel(0, IT8152_PCI_CFG_DATA);
-
-		writel(0x20, IT8152_GPIO_GPDR);
-
-		/* CardBus Controller on ATXbase baseboard */
-		writel(0x4000, IT8152_PCI_CFG_ADDR);
-		if (readl(IT8152_PCI_CFG_DATA) == 0xAC51104C) {
-			pr_info("CardBus Bridge found.\n");
-
-			/* Configure socket 0 */
-			writel(0x408C, IT8152_PCI_CFG_ADDR);
-			writel(0x1022, IT8152_PCI_CFG_DATA);
-
-			writel(0x4080, IT8152_PCI_CFG_ADDR);
-			writel(0x3844d060, IT8152_PCI_CFG_DATA);
-
-			writel(0x4090, IT8152_PCI_CFG_ADDR);
-			writel(((readl(IT8152_PCI_CFG_DATA) & 0xffff) |
-				0x60440000),
-			       IT8152_PCI_CFG_DATA);
-
-			writel(0x4018, IT8152_PCI_CFG_ADDR);
-			writel(0xb0000000, IT8152_PCI_CFG_DATA);
-
-			/* Configure socket 1 */
-			writel(0x418C, IT8152_PCI_CFG_ADDR);
-			writel(0x1022, IT8152_PCI_CFG_DATA);
-
-			writel(0x4180, IT8152_PCI_CFG_ADDR);
-			writel(0x3844d060, IT8152_PCI_CFG_DATA);
-
-			writel(0x4190, IT8152_PCI_CFG_ADDR);
-			writel(((readl(IT8152_PCI_CFG_DATA) & 0xffff) |
-				0x60440000),
-			       IT8152_PCI_CFG_DATA);
-
-			writel(0x4118, IT8152_PCI_CFG_ADDR);
-			writel(0xb0000000, IT8152_PCI_CFG_DATA);
-		}
-	}
-}
-
-static struct hw_pci cmx2xx_pci __initdata = {
-	.swizzle	= pci_std_swizzle,
-	.map_irq	= cmx2xx_pci_map_irq,
-	.nr_controllers	= 1,
-	.setup		= it8152_pci_setup,
-	.scan		= it8152_pci_scan_bus,
-	.preinit	= cmx2xx_pci_preinit,
-};
-
-static int __init cmx2xx_init_pci(void)
-{
-	if (machine_is_armcore())
-		pci_common_init(&cmx2xx_pci);
-
-	return 0;
-}
-
-subsys_initcall(cmx2xx_init_pci);
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/cm-x2xx-pci.h b/ANDROID_3.4.5/arch/arm/mach-pxa/cm-x2xx-pci.h
deleted file mode 100644
index e24aad2e..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/cm-x2xx-pci.h
+++ /dev/null
@@ -1,13 +0,0 @@
-extern void __cmx2xx_pci_init_irq(int irq_gpio);
-extern void __cmx2xx_pci_suspend(void);
-extern void __cmx2xx_pci_resume(void);
-
-#ifdef CONFIG_PCI
-#define cmx2xx_pci_init_irq(x) __cmx2xx_pci_init_irq(x)
-#define cmx2xx_pci_suspend(x) __cmx2xx_pci_suspend(x)
-#define cmx2xx_pci_resume(x) __cmx2xx_pci_resume(x)
-#else
-#define cmx2xx_pci_init_irq(x) do {} while (0)
-#define cmx2xx_pci_suspend(x) do {} while (0)
-#define cmx2xx_pci_resume(x) do {} while (0)
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/cm-x2xx.c b/ANDROID_3.4.5/arch/arm/mach-pxa/cm-x2xx.c
deleted file mode 100644
index 8fa4ad27..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/cm-x2xx.c
+++ /dev/null
@@ -1,528 +0,0 @@
-/*
- * linux/arch/arm/mach-pxa/cm-x2xx.c
- *
- * Copyright (C) 2008 CompuLab, Ltd.
- * Mike Rapoport <mike@compulab.co.il>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/platform_device.h>
-#include <linux/syscore_ops.h>
-#include <linux/irq.h>
-#include <linux/gpio.h>
-
-#include <linux/dm9000.h>
-#include <linux/leds.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-#include <asm/mach/map.h>
-
-#include <mach/pxa25x.h>
-#include <mach/pxa27x.h>
-#include <mach/audio.h>
-#include <mach/pxafb.h>
-#include <mach/smemc.h>
-
-#include <asm/hardware/it8152.h>
-
-#include "generic.h"
-#include "cm-x2xx-pci.h"
-
-extern void cmx255_init(void);
-extern void cmx270_init(void);
-
-/* reserve IRQs for IT8152 */
-#define CMX2XX_NR_IRQS		(IRQ_BOARD_START + 40)
-
-/* virtual addresses for statically mapped regions */
-#define CMX2XX_VIRT_BASE	(void __iomem *)(0xe8000000)
-#define CMX2XX_IT8152_VIRT	(CMX2XX_VIRT_BASE)
-
-/* physical address if local-bus attached devices */
-#define CMX255_DM9000_PHYS_BASE (PXA_CS1_PHYS + (8 << 22))
-#define CMX270_DM9000_PHYS_BASE	(PXA_CS1_PHYS + (6 << 22))
-
-/* leds */
-#define CMX255_GPIO_RED		(27)
-#define CMX255_GPIO_GREEN	(32)
-#define CMX270_GPIO_RED		(93)
-#define CMX270_GPIO_GREEN	(94)
-
-/* GPIO IRQ usage */
-#define GPIO22_ETHIRQ		(22)
-#define GPIO10_ETHIRQ		(10)
-#define CMX255_GPIO_IT8152_IRQ	(0)
-#define CMX270_GPIO_IT8152_IRQ	(22)
-
-#define CMX255_ETHIRQ		PXA_GPIO_TO_IRQ(GPIO22_ETHIRQ)
-#define CMX270_ETHIRQ		PXA_GPIO_TO_IRQ(GPIO10_ETHIRQ)
-
-#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
-static struct resource cmx255_dm9000_resource[] = {
-	[0] = {
-		.start = CMX255_DM9000_PHYS_BASE,
-		.end   = CMX255_DM9000_PHYS_BASE + 3,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = CMX255_DM9000_PHYS_BASE + 4,
-		.end   = CMX255_DM9000_PHYS_BASE + 4 + 500,
-		.flags = IORESOURCE_MEM,
-	},
-	[2] = {
-		.start = CMX255_ETHIRQ,
-		.end   = CMX255_ETHIRQ,
-		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	}
-};
-
-static struct resource cmx270_dm9000_resource[] = {
-	[0] = {
-		.start = CMX270_DM9000_PHYS_BASE,
-		.end   = CMX270_DM9000_PHYS_BASE + 3,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = CMX270_DM9000_PHYS_BASE + 8,
-		.end   = CMX270_DM9000_PHYS_BASE + 8 + 500,
-		.flags = IORESOURCE_MEM,
-	},
-	[2] = {
-		.start = CMX270_ETHIRQ,
-		.end   = CMX270_ETHIRQ,
-		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	}
-};
-
-static struct dm9000_plat_data cmx270_dm9000_platdata = {
-	.flags		= DM9000_PLATF_32BITONLY | DM9000_PLATF_NO_EEPROM,
-};
-
-static struct platform_device cmx2xx_dm9000_device = {
-	.name		= "dm9000",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(cmx270_dm9000_resource),
-	.dev		= {
-		.platform_data = &cmx270_dm9000_platdata,
-	}
-};
-
-static void __init cmx2xx_init_dm9000(void)
-{
-	if (cpu_is_pxa25x())
-		cmx2xx_dm9000_device.resource = cmx255_dm9000_resource;
-	else
-		cmx2xx_dm9000_device.resource = cmx270_dm9000_resource;
-	platform_device_register(&cmx2xx_dm9000_device);
-}
-#else
-static inline void cmx2xx_init_dm9000(void) {}
-#endif
-
-/* UCB1400 touchscreen controller */
-#if defined(CONFIG_TOUCHSCREEN_UCB1400) || defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE)
-static struct platform_device cmx2xx_ts_device = {
-	.name		= "ucb1400_core",
-	.id		= -1,
-};
-
-static void __init cmx2xx_init_touchscreen(void)
-{
-	platform_device_register(&cmx2xx_ts_device);
-}
-#else
-static inline void cmx2xx_init_touchscreen(void) {}
-#endif
-
-/* CM-X270 LEDs */
-#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
-static struct gpio_led cmx2xx_leds[] = {
-	[0] = {
-		.name = "cm-x2xx:red",
-		.default_trigger = "nand-disk",
-		.active_low = 1,
-	},
-	[1] = {
-		.name = "cm-x2xx:green",
-		.default_trigger = "heartbeat",
-		.active_low = 1,
-	},
-};
-
-static struct gpio_led_platform_data cmx2xx_gpio_led_pdata = {
-	.num_leds = ARRAY_SIZE(cmx2xx_leds),
-	.leds = cmx2xx_leds,
-};
-
-static struct platform_device cmx2xx_led_device = {
-	.name		= "leds-gpio",
-	.id		= -1,
-	.dev		= {
-		.platform_data = &cmx2xx_gpio_led_pdata,
-	},
-};
-
-static void __init cmx2xx_init_leds(void)
-{
-	if (cpu_is_pxa25x()) {
-		cmx2xx_leds[0].gpio = CMX255_GPIO_RED;
-		cmx2xx_leds[1].gpio = CMX255_GPIO_GREEN;
-	} else {
-		cmx2xx_leds[0].gpio = CMX270_GPIO_RED;
-		cmx2xx_leds[1].gpio = CMX270_GPIO_GREEN;
-	}
-	platform_device_register(&cmx2xx_led_device);
-}
-#else
-static inline void cmx2xx_init_leds(void) {}
-#endif
-
-#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
-/*
-  Display definitions
-  keep these for backwards compatibility, although symbolic names (as
-  e.g. in lpd270.c) looks better
-*/
-#define MTYPE_STN320x240	0
-#define MTYPE_TFT640x480	1
-#define MTYPE_CRT640x480	2
-#define MTYPE_CRT800x600	3
-#define MTYPE_TFT320x240	6
-#define MTYPE_STN640x480	7
-
-static struct pxafb_mode_info generic_stn_320x240_mode = {
-	.pixclock	= 76923,
-	.bpp		= 8,
-	.xres		= 320,
-	.yres		= 240,
-	.hsync_len	= 3,
-	.vsync_len	= 2,
-	.left_margin	= 3,
-	.upper_margin	= 0,
-	.right_margin	= 3,
-	.lower_margin	= 0,
-	.sync		= (FB_SYNC_HOR_HIGH_ACT |
-			   FB_SYNC_VERT_HIGH_ACT),
-	.cmap_greyscale = 0,
-};
-
-static struct pxafb_mach_info generic_stn_320x240 = {
-	.modes		= &generic_stn_320x240_mode,
-	.num_modes	= 1,
-	.lcd_conn	= LCD_COLOR_STN_8BPP | LCD_PCLK_EDGE_FALL |\
-			  LCD_AC_BIAS_FREQ(0xff),
-	.cmap_inverse	= 0,
-	.cmap_static	= 0,
-};
-
-static struct pxafb_mode_info generic_tft_640x480_mode = {
-	.pixclock	= 38461,
-	.bpp		= 8,
-	.xres		= 640,
-	.yres		= 480,
-	.hsync_len	= 60,
-	.vsync_len	= 2,
-	.left_margin	= 70,
-	.upper_margin	= 10,
-	.right_margin	= 70,
-	.lower_margin	= 5,
-	.sync		= 0,
-	.cmap_greyscale = 0,
-};
-
-static struct pxafb_mach_info generic_tft_640x480 = {
-	.modes		= &generic_tft_640x480_mode,
-	.num_modes	= 1,
-	.lcd_conn	= LCD_COLOR_TFT_8BPP | LCD_PCLK_EDGE_FALL |\
-			  LCD_AC_BIAS_FREQ(0xff),
-	.cmap_inverse	= 0,
-	.cmap_static	= 0,
-};
-
-static struct pxafb_mode_info generic_crt_640x480_mode = {
-	.pixclock	= 38461,
-	.bpp		= 8,
-	.xres		= 640,
-	.yres		= 480,
-	.hsync_len	= 63,
-	.vsync_len	= 2,
-	.left_margin	= 81,
-	.upper_margin	= 33,
-	.right_margin	= 16,
-	.lower_margin	= 10,
-	.sync		= (FB_SYNC_HOR_HIGH_ACT |
-			   FB_SYNC_VERT_HIGH_ACT),
-	.cmap_greyscale = 0,
-};
-
-static struct pxafb_mach_info generic_crt_640x480 = {
-	.modes		= &generic_crt_640x480_mode,
-	.num_modes	= 1,
-	.lcd_conn	= LCD_COLOR_TFT_8BPP | LCD_AC_BIAS_FREQ(0xff),
-	.cmap_inverse	= 0,
-	.cmap_static	= 0,
-};
-
-static struct pxafb_mode_info generic_crt_800x600_mode = {
-	.pixclock	= 28846,
-	.bpp		= 8,
-	.xres		= 800,
-	.yres	  	= 600,
-	.hsync_len	= 63,
-	.vsync_len	= 2,
-	.left_margin	= 26,
-	.upper_margin	= 21,
-	.right_margin	= 26,
-	.lower_margin	= 11,
-	.sync		= (FB_SYNC_HOR_HIGH_ACT |
-			   FB_SYNC_VERT_HIGH_ACT),
-	.cmap_greyscale = 0,
-};
-
-static struct pxafb_mach_info generic_crt_800x600 = {
-	.modes		= &generic_crt_800x600_mode,
-	.num_modes	= 1,
-	.lcd_conn	= LCD_COLOR_TFT_8BPP | LCD_AC_BIAS_FREQ(0xff),
-	.cmap_inverse	= 0,
-	.cmap_static	= 0,
-};
-
-static struct pxafb_mode_info generic_tft_320x240_mode = {
-	.pixclock	= 134615,
-	.bpp		= 16,
-	.xres		= 320,
-	.yres		= 240,
-	.hsync_len	= 63,
-	.vsync_len	= 7,
-	.left_margin	= 75,
-	.upper_margin	= 0,
-	.right_margin	= 15,
-	.lower_margin	= 15,
-	.sync		= 0,
-	.cmap_greyscale = 0,
-};
-
-static struct pxafb_mach_info generic_tft_320x240 = {
-	.modes		= &generic_tft_320x240_mode,
-	.num_modes	= 1,
-	.lcd_conn	= LCD_COLOR_TFT_16BPP | LCD_AC_BIAS_FREQ(0xff),
-	.cmap_inverse	= 0,
-	.cmap_static	= 0,
-};
-
-static struct pxafb_mode_info generic_stn_640x480_mode = {
-	.pixclock	= 57692,
-	.bpp		= 8,
-	.xres		= 640,
-	.yres		= 480,
-	.hsync_len	= 4,
-	.vsync_len	= 2,
-	.left_margin	= 10,
-	.upper_margin	= 5,
-	.right_margin	= 10,
-	.lower_margin	= 5,
-	.sync		= (FB_SYNC_HOR_HIGH_ACT |
-			   FB_SYNC_VERT_HIGH_ACT),
-	.cmap_greyscale = 0,
-};
-
-static struct pxafb_mach_info generic_stn_640x480 = {
-	.modes		= &generic_stn_640x480_mode,
-	.num_modes	= 1,
-	.lcd_conn	= LCD_COLOR_STN_8BPP | LCD_AC_BIAS_FREQ(0xff),
-	.cmap_inverse	= 0,
-	.cmap_static	= 0,
-};
-
-static struct pxafb_mach_info *cmx2xx_display = &generic_crt_640x480;
-
-static int __init cmx2xx_set_display(char *str)
-{
-	int disp_type = simple_strtol(str, NULL, 0);
-	switch (disp_type) {
-	case MTYPE_STN320x240:
-		cmx2xx_display = &generic_stn_320x240;
-		break;
-	case MTYPE_TFT640x480:
-		cmx2xx_display = &generic_tft_640x480;
-		break;
-	case MTYPE_CRT640x480:
-		cmx2xx_display = &generic_crt_640x480;
-		break;
-	case MTYPE_CRT800x600:
-		cmx2xx_display = &generic_crt_800x600;
-		break;
-	case MTYPE_TFT320x240:
-		cmx2xx_display = &generic_tft_320x240;
-		break;
-	case MTYPE_STN640x480:
-		cmx2xx_display = &generic_stn_640x480;
-		break;
-	default: /* fallback to CRT 640x480 */
-		cmx2xx_display = &generic_crt_640x480;
-		break;
-	}
-	return 1;
-}
-
-/*
-   This should be done really early to get proper configuration for
-   frame buffer.
-   Indeed, pxafb parameters can be used istead, but CM-X2XX bootloader
-   has limitied line length for kernel command line, and also it will
-   break compatibitlty with proprietary releases already in field.
-*/
-__setup("monitor=", cmx2xx_set_display);
-
-static void __init cmx2xx_init_display(void)
-{
-	pxa_set_fb_info(NULL, cmx2xx_display);
-}
-#else
-static inline void cmx2xx_init_display(void) {}
-#endif
-
-#ifdef CONFIG_PM
-static unsigned long sleep_save_msc[10];
-
-static int cmx2xx_suspend(void)
-{
-	cmx2xx_pci_suspend();
-
-	/* save MSC registers */
-	sleep_save_msc[0] = __raw_readl(MSC0);
-	sleep_save_msc[1] = __raw_readl(MSC1);
-	sleep_save_msc[2] = __raw_readl(MSC2);
-
-	/* setup power saving mode registers */
-	PCFR = 0x0;
-	PSLR = 0xff400000;
-	PMCR  = 0x00000005;
-	PWER  = 0x80000000;
-	PFER  = 0x00000000;
-	PRER  = 0x00000000;
-	PGSR0 = 0xC0018800;
-	PGSR1 = 0x004F0002;
-	PGSR2 = 0x6021C000;
-	PGSR3 = 0x00020000;
-
-	return 0;
-}
-
-static void cmx2xx_resume(void)
-{
-	cmx2xx_pci_resume();
-
-	/* restore MSC registers */
-	__raw_writel(sleep_save_msc[0], MSC0);
-	__raw_writel(sleep_save_msc[1], MSC1);
-	__raw_writel(sleep_save_msc[2], MSC2);
-}
-
-static struct syscore_ops cmx2xx_pm_syscore_ops = {
-	.resume = cmx2xx_resume,
-	.suspend = cmx2xx_suspend,
-};
-
-static int __init cmx2xx_pm_init(void)
-{
-	register_syscore_ops(&cmx2xx_pm_syscore_ops);
-
-	return 0;
-}
-#else
-static int __init cmx2xx_pm_init(void) { return 0; }
-#endif
-
-#if defined(CONFIG_SND_PXA2XX_AC97) || defined(CONFIG_SND_PXA2XX_AC97_MODULE)
-static void __init cmx2xx_init_ac97(void)
-{
-	pxa_set_ac97_info(NULL);
-}
-#else
-static inline void cmx2xx_init_ac97(void) {}
-#endif
-
-static void __init cmx2xx_init(void)
-{
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	cmx2xx_pm_init();
-
-	if (cpu_is_pxa25x())
-		cmx255_init();
-	else
-		cmx270_init();
-
-	cmx2xx_init_dm9000();
-	cmx2xx_init_display();
-	cmx2xx_init_ac97();
-	cmx2xx_init_touchscreen();
-	cmx2xx_init_leds();
-}
-
-static void __init cmx2xx_init_irq(void)
-{
-	if (cpu_is_pxa25x()) {
-		pxa25x_init_irq();
-		cmx2xx_pci_init_irq(CMX255_GPIO_IT8152_IRQ);
-	} else {
-		pxa27x_init_irq();
-		cmx2xx_pci_init_irq(CMX270_GPIO_IT8152_IRQ);
-	}
-}
-
-#ifdef CONFIG_PCI
-/* Map PCI companion statically */
-static struct map_desc cmx2xx_io_desc[] __initdata = {
-	[0] = { /* PCI bridge */
-		.virtual	= (unsigned long)CMX2XX_IT8152_VIRT,
-		.pfn		= __phys_to_pfn(PXA_CS4_PHYS),
-		.length		= SZ_64M,
-		.type		= MT_DEVICE
-	},
-};
-
-static void __init cmx2xx_map_io(void)
-{
-	if (cpu_is_pxa25x())
-		pxa25x_map_io();
-
-	if (cpu_is_pxa27x())
-		pxa27x_map_io();
-
-	iotable_init(cmx2xx_io_desc, ARRAY_SIZE(cmx2xx_io_desc));
-
-	it8152_base_address = CMX2XX_IT8152_VIRT;
-}
-#else
-static void __init cmx2xx_map_io(void)
-{
-	if (cpu_is_pxa25x())
-		pxa25x_map_io();
-
-	if (cpu_is_pxa27x())
-		pxa27x_map_io();
-}
-#endif
-
-MACHINE_START(ARMCORE, "Compulab CM-X2XX")
-	.atag_offset	= 0x100,
-	.map_io		= cmx2xx_map_io,
-	.nr_irqs	= CMX2XX_NR_IRQS,
-	.init_irq	= cmx2xx_init_irq,
-	/* NOTE: pxa25x_handle_irq() works on PXA27x w/o camera support */
-	.handle_irq	= pxa25x_handle_irq,
-	.timer		= &pxa_timer,
-	.init_machine	= cmx2xx_init,
-#ifdef CONFIG_PCI
-	.dma_zone_size	= SZ_64M,
-#endif
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/cm-x300.c b/ANDROID_3.4.5/arch/arm/mach-pxa/cm-x300.c
deleted file mode 100644
index 31327401..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/cm-x300.c
+++ /dev/null
@@ -1,863 +0,0 @@
-/*
- * linux/arch/arm/mach-pxa/cm-x300.c
- *
- * Support for the CompuLab CM-X300 modules
- *
- * Copyright (C) 2008,2009 CompuLab Ltd.
- *
- * Mike Rapoport <mike@compulab.co.il>
- * Igor Grinberg <grinberg@compulab.co.il>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#define pr_fmt(fmt) "%s: " fmt, __func__
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/clk.h>
-
-#include <linux/gpio.h>
-#include <linux/dm9000.h>
-#include <linux/leds.h>
-#include <linux/rtc-v3020.h>
-#include <linux/pwm_backlight.h>
-
-#include <linux/i2c.h>
-#include <linux/i2c/pca953x.h>
-#include <linux/i2c/pxa-i2c.h>
-
-#include <linux/mfd/da903x.h>
-#include <linux/regulator/machine.h>
-#include <linux/power_supply.h>
-#include <linux/apm-emulation.h>
-
-#include <linux/spi/spi.h>
-#include <linux/spi/spi_gpio.h>
-#include <linux/spi/tdo24m.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/setup.h>
-#include <asm/system_info.h>
-
-#include <mach/pxa300.h>
-#include <mach/pxa27x-udc.h>
-#include <mach/pxafb.h>
-#include <mach/mmc.h>
-#include <mach/ohci.h>
-#include <plat/pxa3xx_nand.h>
-#include <mach/audio.h>
-#include <mach/pxa3xx-u2d.h>
-
-#include <asm/mach/map.h>
-
-#include "generic.h"
-#include "devices.h"
-
-#define CM_X300_ETH_PHYS	0x08000010
-
-#define GPIO82_MMC_IRQ		(82)
-#define GPIO85_MMC_WP		(85)
-
-#define	CM_X300_MMC_IRQ		PXA_GPIO_TO_IRQ(GPIO82_MMC_IRQ)
-
-#define GPIO95_RTC_CS		(95)
-#define GPIO96_RTC_WR		(96)
-#define GPIO97_RTC_RD		(97)
-#define GPIO98_RTC_IO		(98)
-
-#define GPIO_ULPI_PHY_RST	(127)
-
-static mfp_cfg_t cm_x3xx_mfp_cfg[] __initdata = {
-	/* LCD */
-	GPIO54_LCD_LDD_0,
-	GPIO55_LCD_LDD_1,
-	GPIO56_LCD_LDD_2,
-	GPIO57_LCD_LDD_3,
-	GPIO58_LCD_LDD_4,
-	GPIO59_LCD_LDD_5,
-	GPIO60_LCD_LDD_6,
-	GPIO61_LCD_LDD_7,
-	GPIO62_LCD_LDD_8,
-	GPIO63_LCD_LDD_9,
-	GPIO64_LCD_LDD_10,
-	GPIO65_LCD_LDD_11,
-	GPIO66_LCD_LDD_12,
-	GPIO67_LCD_LDD_13,
-	GPIO68_LCD_LDD_14,
-	GPIO69_LCD_LDD_15,
-	GPIO72_LCD_FCLK,
-	GPIO73_LCD_LCLK,
-	GPIO74_LCD_PCLK,
-	GPIO75_LCD_BIAS,
-
-	/* BTUART */
-	GPIO111_UART2_RTS,
-	GPIO112_UART2_RXD | MFP_LPM_EDGE_FALL,
-	GPIO113_UART2_TXD,
-	GPIO114_UART2_CTS | MFP_LPM_EDGE_BOTH,
-
-	/* STUART */
-	GPIO109_UART3_TXD,
-	GPIO110_UART3_RXD | MFP_LPM_EDGE_FALL,
-
-	/* AC97 */
-	GPIO23_AC97_nACRESET,
-	GPIO24_AC97_SYSCLK,
-	GPIO29_AC97_BITCLK,
-	GPIO25_AC97_SDATA_IN_0,
-	GPIO27_AC97_SDATA_OUT,
-	GPIO28_AC97_SYNC,
-
-	/* Keypad */
-	GPIO115_KP_MKIN_0 | MFP_LPM_EDGE_BOTH,
-	GPIO116_KP_MKIN_1 | MFP_LPM_EDGE_BOTH,
-	GPIO117_KP_MKIN_2 | MFP_LPM_EDGE_BOTH,
-	GPIO118_KP_MKIN_3 | MFP_LPM_EDGE_BOTH,
-	GPIO119_KP_MKIN_4 | MFP_LPM_EDGE_BOTH,
-	GPIO120_KP_MKIN_5 | MFP_LPM_EDGE_BOTH,
-	GPIO2_2_KP_MKIN_6 | MFP_LPM_EDGE_BOTH,
-	GPIO3_2_KP_MKIN_7 | MFP_LPM_EDGE_BOTH,
-	GPIO121_KP_MKOUT_0,
-	GPIO122_KP_MKOUT_1,
-	GPIO123_KP_MKOUT_2,
-	GPIO124_KP_MKOUT_3,
-	GPIO125_KP_MKOUT_4,
-	GPIO4_2_KP_MKOUT_5,
-
-	/* MMC1 */
-	GPIO3_MMC1_DAT0,
-	GPIO4_MMC1_DAT1 | MFP_LPM_EDGE_BOTH,
-	GPIO5_MMC1_DAT2,
-	GPIO6_MMC1_DAT3,
-	GPIO7_MMC1_CLK,
-	GPIO8_MMC1_CMD,	/* CMD0 for slot 0 */
-
-	/* MMC2 */
-	GPIO9_MMC2_DAT0,
-	GPIO10_MMC2_DAT1 | MFP_LPM_EDGE_BOTH,
-	GPIO11_MMC2_DAT2,
-	GPIO12_MMC2_DAT3,
-	GPIO13_MMC2_CLK,
-	GPIO14_MMC2_CMD,
-
-	/* FFUART */
-	GPIO30_UART1_RXD | MFP_LPM_EDGE_FALL,
-	GPIO31_UART1_TXD,
-	GPIO32_UART1_CTS,
-	GPIO37_UART1_RTS,
-	GPIO33_UART1_DCD,
-	GPIO34_UART1_DSR | MFP_LPM_EDGE_FALL,
-	GPIO35_UART1_RI,
-	GPIO36_UART1_DTR,
-
-	/* GPIOs */
-	GPIO82_GPIO | MFP_PULL_HIGH,	/* MMC CD */
-	GPIO85_GPIO,			/* MMC WP */
-	GPIO99_GPIO,			/* Ethernet IRQ */
-
-	/* RTC GPIOs */
-	GPIO95_GPIO | MFP_LPM_DRIVE_HIGH,	/* RTC CS */
-	GPIO96_GPIO | MFP_LPM_DRIVE_HIGH,	/* RTC WR */
-	GPIO97_GPIO | MFP_LPM_DRIVE_HIGH,	/* RTC RD */
-	GPIO98_GPIO,				/* RTC IO */
-
-	/* Standard I2C */
-	GPIO21_I2C_SCL,
-	GPIO22_I2C_SDA,
-
-	/* PWM Backlight */
-	GPIO19_PWM2_OUT,
-};
-
-static mfp_cfg_t cm_x3xx_rev_lt130_mfp_cfg[] __initdata = {
-	/* GPIOs */
-	GPIO79_GPIO,			/* LED */
-	GPIO77_GPIO,			/* WiFi reset */
-	GPIO78_GPIO,			/* BT reset */
-};
-
-static mfp_cfg_t cm_x3xx_rev_ge130_mfp_cfg[] __initdata = {
-	/* GPIOs */
-	GPIO76_GPIO,			/* LED */
-	GPIO71_GPIO,			/* WiFi reset */
-	GPIO70_GPIO,			/* BT reset */
-};
-
-static mfp_cfg_t cm_x310_mfp_cfg[] __initdata = {
-	/* USB PORT 2 */
-	ULPI_STP,
-	ULPI_NXT,
-	ULPI_DIR,
-	GPIO30_ULPI_DATA_OUT_0,
-	GPIO31_ULPI_DATA_OUT_1,
-	GPIO32_ULPI_DATA_OUT_2,
-	GPIO33_ULPI_DATA_OUT_3,
-	GPIO34_ULPI_DATA_OUT_4,
-	GPIO35_ULPI_DATA_OUT_5,
-	GPIO36_ULPI_DATA_OUT_6,
-	GPIO37_ULPI_DATA_OUT_7,
-	GPIO38_ULPI_CLK,
-	/* external PHY reset pin */
-	GPIO127_GPIO,
-
-	/* USB PORT 3 */
-	GPIO77_USB_P3_1,
-	GPIO78_USB_P3_2,
-	GPIO79_USB_P3_3,
-	GPIO80_USB_P3_4,
-	GPIO81_USB_P3_5,
-	GPIO82_USB_P3_6,
-	GPIO0_2_USBH_PEN,
-};
-
-#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
-static struct resource dm9000_resources[] = {
-	[0] = {
-		.start	= CM_X300_ETH_PHYS,
-		.end	= CM_X300_ETH_PHYS + 0x3,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= CM_X300_ETH_PHYS + 0x4,
-		.end	= CM_X300_ETH_PHYS + 0x4 + 500,
-		.flags	= IORESOURCE_MEM,
-	},
-	[2] = {
-		.start	= PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO99)),
-		.end	= PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO99)),
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	}
-};
-
-static struct dm9000_plat_data cm_x300_dm9000_platdata = {
-	.flags		= DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM,
-};
-
-static struct platform_device dm9000_device = {
-	.name		= "dm9000",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(dm9000_resources),
-	.resource	= dm9000_resources,
-	.dev		= {
-		.platform_data = &cm_x300_dm9000_platdata,
-	}
-
-};
-
-static void __init cm_x300_init_dm9000(void)
-{
-	platform_device_register(&dm9000_device);
-}
-#else
-static inline void cm_x300_init_dm9000(void) {}
-#endif
-
-/* LCD */
-#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
-static struct pxafb_mode_info cm_x300_lcd_modes[] = {
-	[0] = {
-		.pixclock	= 38250,
-		.bpp		= 16,
-		.xres		= 480,
-		.yres		= 640,
-		.hsync_len	= 8,
-		.vsync_len	= 2,
-		.left_margin	= 8,
-		.upper_margin	= 2,
-		.right_margin	= 24,
-		.lower_margin	= 4,
-		.cmap_greyscale	= 0,
-	},
-	[1] = {
-		.pixclock	= 153800,
-		.bpp		= 16,
-		.xres		= 240,
-		.yres		= 320,
-		.hsync_len	= 8,
-		.vsync_len	= 2,
-		.left_margin	= 8,
-		.upper_margin	= 2,
-		.right_margin	= 88,
-		.lower_margin	= 2,
-		.cmap_greyscale	= 0,
-	},
-};
-
-static struct pxafb_mach_info cm_x300_lcd = {
-	.modes			= cm_x300_lcd_modes,
-	.num_modes		= ARRAY_SIZE(cm_x300_lcd_modes),
-	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
-};
-
-static void __init cm_x300_init_lcd(void)
-{
-	pxa_set_fb_info(NULL, &cm_x300_lcd);
-}
-#else
-static inline void cm_x300_init_lcd(void) {}
-#endif
-
-#if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE)
-static struct platform_pwm_backlight_data cm_x300_backlight_data = {
-	.pwm_id		= 2,
-	.max_brightness	= 100,
-	.dft_brightness	= 100,
-	.pwm_period_ns	= 10000,
-};
-
-static struct platform_device cm_x300_backlight_device = {
-	.name		= "pwm-backlight",
-	.dev		= {
-		.parent = &pxa27x_device_pwm0.dev,
-		.platform_data	= &cm_x300_backlight_data,
-	},
-};
-
-static void cm_x300_init_bl(void)
-{
-	platform_device_register(&cm_x300_backlight_device);
-}
-#else
-static inline void cm_x300_init_bl(void) {}
-#endif
-
-#if defined(CONFIG_SPI_GPIO) || defined(CONFIG_SPI_GPIO_MODULE)
-#define GPIO_LCD_BASE	(144)
-#define GPIO_LCD_DIN	(GPIO_LCD_BASE + 8)	/* aux_gpio3_0 */
-#define GPIO_LCD_DOUT	(GPIO_LCD_BASE + 9)	/* aux_gpio3_1 */
-#define GPIO_LCD_SCL	(GPIO_LCD_BASE + 10)	/* aux_gpio3_2 */
-#define GPIO_LCD_CS	(GPIO_LCD_BASE + 11)	/* aux_gpio3_3 */
-#define LCD_SPI_BUS_NUM	(1)
-
-static struct spi_gpio_platform_data cm_x300_spi_gpio_pdata = {
-	.sck		= GPIO_LCD_SCL,
-	.mosi		= GPIO_LCD_DIN,
-	.miso		= GPIO_LCD_DOUT,
-	.num_chipselect	= 1,
-};
-
-static struct platform_device cm_x300_spi_gpio = {
-	.name		= "spi_gpio",
-	.id		= LCD_SPI_BUS_NUM,
-	.dev		= {
-		.platform_data	= &cm_x300_spi_gpio_pdata,
-	},
-};
-
-static struct tdo24m_platform_data cm_x300_tdo24m_pdata = {
-	.model = TDO35S,
-};
-
-static struct spi_board_info cm_x300_spi_devices[] __initdata = {
-	{
-		.modalias		= "tdo24m",
-		.max_speed_hz		= 1000000,
-		.bus_num		= LCD_SPI_BUS_NUM,
-		.chip_select		= 0,
-		.controller_data	= (void *) GPIO_LCD_CS,
-		.platform_data		= &cm_x300_tdo24m_pdata,
-	},
-};
-
-static void __init cm_x300_init_spi(void)
-{
-	spi_register_board_info(cm_x300_spi_devices,
-				ARRAY_SIZE(cm_x300_spi_devices));
-	platform_device_register(&cm_x300_spi_gpio);
-}
-#else
-static inline void cm_x300_init_spi(void) {}
-#endif
-
-#if defined(CONFIG_SND_PXA2XX_LIB_AC97)
-static void __init cm_x300_init_ac97(void)
-{
-	pxa_set_ac97_info(NULL);
-}
-#else
-static inline void cm_x300_init_ac97(void) {}
-#endif
-
-#if defined(CONFIG_MTD_NAND_PXA3xx) || defined(CONFIG_MTD_NAND_PXA3xx_MODULE)
-static struct mtd_partition cm_x300_nand_partitions[] = {
-	[0] = {
-		.name        = "OBM",
-		.offset      = 0,
-		.size        = SZ_256K,
-		.mask_flags  = MTD_WRITEABLE, /* force read-only */
-	},
-	[1] = {
-		.name        = "U-Boot",
-		.offset      = MTDPART_OFS_APPEND,
-		.size        = SZ_256K,
-		.mask_flags  = MTD_WRITEABLE, /* force read-only */
-	},
-	[2] = {
-		.name        = "Environment",
-		.offset      = MTDPART_OFS_APPEND,
-		.size        = SZ_256K,
-	},
-	[3] = {
-		.name        = "reserved",
-		.offset      = MTDPART_OFS_APPEND,
-		.size        = SZ_256K + SZ_1M,
-		.mask_flags  = MTD_WRITEABLE, /* force read-only */
-	},
-	[4] = {
-		.name        = "kernel",
-		.offset      = MTDPART_OFS_APPEND,
-		.size        = SZ_4M,
-	},
-	[5] = {
-		.name        = "fs",
-		.offset      = MTDPART_OFS_APPEND,
-		.size        = MTDPART_SIZ_FULL,
-	},
-};
-
-static struct pxa3xx_nand_platform_data cm_x300_nand_info = {
-	.enable_arbiter	= 1,
-	.keep_config	= 1,
-	.num_cs		= 1,
-	.parts[0]	= cm_x300_nand_partitions,
-	.nr_parts[0]	= ARRAY_SIZE(cm_x300_nand_partitions),
-};
-
-static void __init cm_x300_init_nand(void)
-{
-	pxa3xx_set_nand_info(&cm_x300_nand_info);
-}
-#else
-static inline void cm_x300_init_nand(void) {}
-#endif
-
-#if defined(CONFIG_MMC) || defined(CONFIG_MMC_MODULE)
-static struct pxamci_platform_data cm_x300_mci_platform_data = {
-	.detect_delay_ms	= 200,
-	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
-	.gpio_card_detect	= GPIO82_MMC_IRQ,
-	.gpio_card_ro		= GPIO85_MMC_WP,
-	.gpio_power		= -1,
-};
-
-/* The second MMC slot of CM-X300 is hardwired to Libertas card and has
-   no detection/ro pins */
-static int cm_x300_mci2_init(struct device *dev,
-			     irq_handler_t cm_x300_detect_int,
-	void *data)
-{
-	return 0;
-}
-
-static void cm_x300_mci2_exit(struct device *dev, void *data)
-{
-}
-
-static struct pxamci_platform_data cm_x300_mci2_platform_data = {
-	.detect_delay_ms	= 200,
-	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
-	.init 			= cm_x300_mci2_init,
-	.exit			= cm_x300_mci2_exit,
-	.gpio_card_detect	= -1,
-	.gpio_card_ro		= -1,
-	.gpio_power		= -1,
-};
-
-static void __init cm_x300_init_mmc(void)
-{
-	pxa_set_mci_info(&cm_x300_mci_platform_data);
-	pxa3xx_set_mci2_info(&cm_x300_mci2_platform_data);
-}
-#else
-static inline void cm_x300_init_mmc(void) {}
-#endif
-
-#if defined(CONFIG_PXA310_ULPI)
-static struct clk *pout_clk;
-
-static int cm_x300_ulpi_phy_reset(void)
-{
-	int err;
-
-	/* reset the PHY */
-	err = gpio_request_one(GPIO_ULPI_PHY_RST, GPIOF_OUT_INIT_LOW,
-			       "ulpi reset");
-	if (err) {
-		pr_err("failed to request ULPI reset GPIO: %d\n", err);
-		return err;
-	}
-
-	msleep(10);
-	gpio_set_value(GPIO_ULPI_PHY_RST, 1);
-	msleep(10);
-
-	gpio_free(GPIO_ULPI_PHY_RST);
-
-	return 0;
-}
-
-static inline int cm_x300_u2d_init(struct device *dev)
-{
-	int err = 0;
-
-	if (cpu_is_pxa310()) {
-		/* CLK_POUT is connected to the ULPI PHY */
-		pout_clk = clk_get(NULL, "CLK_POUT");
-		if (IS_ERR(pout_clk)) {
-			err = PTR_ERR(pout_clk);
-			pr_err("failed to get CLK_POUT: %d\n", err);
-			return err;
-		}
-		clk_enable(pout_clk);
-
-		err = cm_x300_ulpi_phy_reset();
-		if (err) {
-			clk_disable(pout_clk);
-			clk_put(pout_clk);
-		}
-	}
-
-	return err;
-}
-
-static void cm_x300_u2d_exit(struct device *dev)
-{
-	if (cpu_is_pxa310()) {
-		clk_disable(pout_clk);
-		clk_put(pout_clk);
-	}
-}
-
-static struct pxa3xx_u2d_platform_data cm_x300_u2d_platform_data = {
-	.ulpi_mode	= ULPI_SER_6PIN,
-	.init		= cm_x300_u2d_init,
-	.exit		= cm_x300_u2d_exit,
-};
-
-static void cm_x300_init_u2d(void)
-{
-	pxa3xx_set_u2d_info(&cm_x300_u2d_platform_data);
-}
-#else
-static inline void cm_x300_init_u2d(void) {}
-#endif
-
-#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-static int cm_x300_ohci_init(struct device *dev)
-{
-	if (cpu_is_pxa300())
-		UP2OCR = UP2OCR_HXS
-			| UP2OCR_HXOE | UP2OCR_DMPDE | UP2OCR_DPPDE;
-
-	return 0;
-}
-
-static struct pxaohci_platform_data cm_x300_ohci_platform_data = {
-	.port_mode	= PMM_PERPORT_MODE,
-	.flags		= ENABLE_PORT_ALL | POWER_CONTROL_LOW,
-	.init		= cm_x300_ohci_init,
-};
-
-static void __init cm_x300_init_ohci(void)
-{
-	pxa_set_ohci_info(&cm_x300_ohci_platform_data);
-}
-#else
-static inline void cm_x300_init_ohci(void) {}
-#endif
-
-#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
-static struct gpio_led cm_x300_leds[] = {
-	[0] = {
-		.name = "cm-x300:green",
-		.default_trigger = "heartbeat",
-		.active_low = 1,
-	},
-};
-
-static struct gpio_led_platform_data cm_x300_gpio_led_pdata = {
-	.num_leds = ARRAY_SIZE(cm_x300_leds),
-	.leds = cm_x300_leds,
-};
-
-static struct platform_device cm_x300_led_device = {
-	.name		= "leds-gpio",
-	.id		= -1,
-	.dev		= {
-		.platform_data = &cm_x300_gpio_led_pdata,
-	},
-};
-
-static void __init cm_x300_init_leds(void)
-{
-	if (system_rev < 130)
-		cm_x300_leds[0].gpio = 79;
-	else
-		cm_x300_leds[0].gpio = 76;
-
-	platform_device_register(&cm_x300_led_device);
-}
-#else
-static inline void cm_x300_init_leds(void) {}
-#endif
-
-#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
-/* PCA9555 */
-static struct pca953x_platform_data cm_x300_gpio_ext_pdata_0 = {
-	.gpio_base = 128,
-};
-
-static struct pca953x_platform_data cm_x300_gpio_ext_pdata_1 = {
-	.gpio_base = 144,
-};
-
-static struct i2c_board_info cm_x300_gpio_ext_info[] = {
-	[0] = {
-		I2C_BOARD_INFO("pca9555", 0x24),
-		.platform_data = &cm_x300_gpio_ext_pdata_0,
-	},
-	[1] = {
-		I2C_BOARD_INFO("pca9555", 0x25),
-		.platform_data = &cm_x300_gpio_ext_pdata_1,
-	},
-};
-
-static void __init cm_x300_init_i2c(void)
-{
-	pxa_set_i2c_info(NULL);
-	i2c_register_board_info(0, cm_x300_gpio_ext_info,
-				ARRAY_SIZE(cm_x300_gpio_ext_info));
-}
-#else
-static inline void cm_x300_init_i2c(void) {}
-#endif
-
-#if defined(CONFIG_RTC_DRV_V3020) || defined(CONFIG_RTC_DRV_V3020_MODULE)
-struct v3020_platform_data cm_x300_v3020_pdata = {
-	.use_gpio	= 1,
-	.gpio_cs	= GPIO95_RTC_CS,
-	.gpio_wr	= GPIO96_RTC_WR,
-	.gpio_rd	= GPIO97_RTC_RD,
-	.gpio_io	= GPIO98_RTC_IO,
-};
-
-static struct platform_device cm_x300_rtc_device = {
-	.name		= "v3020",
-	.id		= -1,
-	.dev		= {
-		.platform_data = &cm_x300_v3020_pdata,
-	}
-};
-
-static void __init cm_x300_init_rtc(void)
-{
-	platform_device_register(&cm_x300_rtc_device);
-}
-#else
-static inline void cm_x300_init_rtc(void) {}
-#endif
-
-/* Battery */
-struct power_supply_info cm_x300_psy_info = {
-	.name = "battery",
-	.technology = POWER_SUPPLY_TECHNOLOGY_LIPO,
-	.voltage_max_design = 4200000,
-	.voltage_min_design = 3000000,
-	.use_for_apm = 1,
-};
-
-static void cm_x300_battery_low(void)
-{
-#if defined(CONFIG_APM_EMULATION)
-	apm_queue_event(APM_LOW_BATTERY);
-#endif
-}
-
-static void cm_x300_battery_critical(void)
-{
-#if defined(CONFIG_APM_EMULATION)
-	apm_queue_event(APM_CRITICAL_SUSPEND);
-#endif
-}
-
-struct da9030_battery_info cm_x300_battery_info = {
-	.battery_info = &cm_x300_psy_info,
-
-	.charge_milliamp = 1000,
-	.charge_millivolt = 4200,
-
-	.vbat_low = 3600,
-	.vbat_crit = 3400,
-	.vbat_charge_start = 4100,
-	.vbat_charge_stop = 4200,
-	.vbat_charge_restart = 4000,
-
-	.vcharge_min = 3200,
-	.vcharge_max = 5500,
-
-	.tbat_low = 197,
-	.tbat_high = 78,
-	.tbat_restart = 100,
-
-	.batmon_interval = 0,
-
-	.battery_low = cm_x300_battery_low,
-	.battery_critical = cm_x300_battery_critical,
-};
-
-static struct regulator_consumer_supply buck2_consumers[] = {
-	{
-		.supply = "vcc_core",
-	},
-};
-
-static struct regulator_init_data buck2_data = {
-	.constraints = {
-		.min_uV = 1375000,
-		.max_uV = 1375000,
-		.state_mem = {
-			.enabled = 0,
-		},
-		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
-		.apply_uV = 1,
-	},
-	.num_consumer_supplies = ARRAY_SIZE(buck2_consumers),
-	.consumer_supplies = buck2_consumers,
-};
-
-/* DA9030 */
-struct da903x_subdev_info cm_x300_da9030_subdevs[] = {
-	{
-		.name = "da903x-battery",
-		.id = DA9030_ID_BAT,
-		.platform_data = &cm_x300_battery_info,
-	},
-	{
-		.name = "da903x-regulator",
-		.id = DA9030_ID_BUCK2,
-		.platform_data = &buck2_data,
-	},
-};
-
-static struct da903x_platform_data cm_x300_da9030_info = {
-	.num_subdevs = ARRAY_SIZE(cm_x300_da9030_subdevs),
-	.subdevs = cm_x300_da9030_subdevs,
-};
-
-static struct i2c_board_info cm_x300_pmic_info = {
-	I2C_BOARD_INFO("da9030", 0x49),
-	.irq = IRQ_WAKEUP0,
-	.platform_data = &cm_x300_da9030_info,
-};
-
-static struct i2c_pxa_platform_data cm_x300_pwr_i2c_info = {
-	.use_pio = 1,
-};
-
-static void __init cm_x300_init_da9030(void)
-{
-	pxa3xx_set_i2c_power_info(&cm_x300_pwr_i2c_info);
-	i2c_register_board_info(1, &cm_x300_pmic_info, 1);
-	irq_set_irq_wake(IRQ_WAKEUP0, 1);
-}
-
-/* wi2wi gpio setting for system_rev >= 130 */
-static struct gpio cm_x300_wi2wi_gpios[] __initdata = {
-	{ 71, GPIOF_OUT_INIT_HIGH, "wlan en" },
-	{ 70, GPIOF_OUT_INIT_HIGH, "bt reset" },
-};
-
-static void __init cm_x300_init_wi2wi(void)
-{
-	int err;
-
-	if (system_rev < 130) {
-		cm_x300_wi2wi_gpios[0].gpio = 77;	/* wlan en */
-		cm_x300_wi2wi_gpios[1].gpio = 78;	/* bt reset */
-	}
-
-	/* Libertas and CSR reset */
-	err = gpio_request_array(ARRAY_AND_SIZE(cm_x300_wi2wi_gpios));
-	if (err) {
-		pr_err("failed to request wifi/bt gpios: %d\n", err);
-		return;
-	}
-
-	udelay(10);
-	gpio_set_value(cm_x300_wi2wi_gpios[1].gpio, 0);
-	udelay(10);
-	gpio_set_value(cm_x300_wi2wi_gpios[1].gpio, 1);
-
-	gpio_free_array(ARRAY_AND_SIZE(cm_x300_wi2wi_gpios));
-}
-
-/* MFP */
-static void __init cm_x300_init_mfp(void)
-{
-	/* board-processor specific GPIO initialization */
-	pxa3xx_mfp_config(ARRAY_AND_SIZE(cm_x3xx_mfp_cfg));
-
-	if (system_rev < 130)
-		pxa3xx_mfp_config(ARRAY_AND_SIZE(cm_x3xx_rev_lt130_mfp_cfg));
-	else
-		pxa3xx_mfp_config(ARRAY_AND_SIZE(cm_x3xx_rev_ge130_mfp_cfg));
-
-	if (cpu_is_pxa310())
-		pxa3xx_mfp_config(ARRAY_AND_SIZE(cm_x310_mfp_cfg));
-}
-
-static void __init cm_x300_init(void)
-{
-	cm_x300_init_mfp();
-
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-	if (cpu_is_pxa300())
-		pxa_set_ffuart_info(NULL);
-
-	cm_x300_init_da9030();
-	cm_x300_init_dm9000();
-	cm_x300_init_lcd();
-	cm_x300_init_u2d();
-	cm_x300_init_ohci();
-	cm_x300_init_mmc();
-	cm_x300_init_nand();
-	cm_x300_init_leds();
-	cm_x300_init_i2c();
-	cm_x300_init_spi();
-	cm_x300_init_rtc();
-	cm_x300_init_ac97();
-	cm_x300_init_wi2wi();
-	cm_x300_init_bl();
-}
-
-static void __init cm_x300_fixup(struct tag *tags, char **cmdline,
-				 struct meminfo *mi)
-{
-	/* Make sure that mi->bank[0].start = PHYS_ADDR */
-	for (; tags->hdr.size; tags = tag_next(tags))
-		if (tags->hdr.tag == ATAG_MEM &&
-			tags->u.mem.start == 0x80000000) {
-			tags->u.mem.start = 0xa0000000;
-			break;
-		}
-}
-
-MACHINE_START(CM_X300, "CM-X300 module")
-	.atag_offset	= 0x100,
-	.map_io		= pxa3xx_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa3xx_init_irq,
-	.handle_irq	= pxa3xx_handle_irq,
-	.timer		= &pxa_timer,
-	.init_machine	= cm_x300_init,
-	.fixup		= cm_x300_fixup,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/colibri-evalboard.c b/ANDROID_3.4.5/arch/arm/mach-pxa/colibri-evalboard.c
deleted file mode 100644
index d28e802e..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/colibri-evalboard.c
+++ /dev/null
@@ -1,119 +0,0 @@
-/*
- *  linux/arch/arm/mach-pxa/colibri-evalboard.c
- *
- *  Support for Toradex Colibri Evaluation Carrier Board
- *  Daniel Mack <daniel@caiaq.de>
- *  Marek Vasut <marek.vasut@gmail.com>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/gpio.h>
-#include <asm/mach-types.h>
-#include <mach/hardware.h>
-#include <asm/mach/arch.h>
-#include <linux/i2c.h>
-#include <linux/i2c/pxa-i2c.h>
-
-#include <mach/pxa27x.h>
-#include <mach/colibri.h>
-#include <mach/mmc.h>
-#include <mach/ohci.h>
-#include <mach/pxa27x-udc.h>
-
-#include "generic.h"
-#include "devices.h"
-
-/******************************************************************************
- * SD/MMC card controller
- ******************************************************************************/
-#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
-static struct pxamci_platform_data colibri_mci_platform_data = {
-	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.gpio_power		= -1,
-	.gpio_card_ro		= -1,
-	.detect_delay_ms	= 200,
-};
-
-static void __init colibri_mmc_init(void)
-{
-	if (machine_is_colibri())	/* PXA270 Colibri */
-		colibri_mci_platform_data.gpio_card_detect =
-			GPIO0_COLIBRI_PXA270_SD_DETECT;
-	if (machine_is_colibri300())	/* PXA300 Colibri */
-		colibri_mci_platform_data.gpio_card_detect =
-			GPIO13_COLIBRI_PXA300_SD_DETECT;
-	else				/* PXA320 Colibri */
-		colibri_mci_platform_data.gpio_card_detect =
-			GPIO28_COLIBRI_PXA320_SD_DETECT;
-
-	pxa_set_mci_info(&colibri_mci_platform_data);
-}
-#else
-static inline void colibri_mmc_init(void) {}
-#endif
-
-/******************************************************************************
- * USB Host
- ******************************************************************************/
-#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-static int colibri_ohci_init(struct device *dev)
-{
-	UP2OCR = UP2OCR_HXS | UP2OCR_HXOE | UP2OCR_DPPDE | UP2OCR_DMPDE;
-	return 0;
-}
-
-static struct pxaohci_platform_data colibri_ohci_info = {
-	.port_mode	= PMM_PERPORT_MODE,
-	.flags		= ENABLE_PORT1 |
-			  POWER_CONTROL_LOW | POWER_SENSE_LOW,
-	.init		= colibri_ohci_init,
-};
-
-static void __init colibri_uhc_init(void)
-{
-	/* Colibri PXA270 has two usb ports, TBA for 320 */
-	if (machine_is_colibri())
-		colibri_ohci_info.flags	|= ENABLE_PORT2;
-
-	pxa_set_ohci_info(&colibri_ohci_info);
-}
-#else
-static inline void colibri_uhc_init(void) {}
-#endif
-
-/******************************************************************************
- * I2C RTC
- ******************************************************************************/
-#if defined(CONFIG_RTC_DRV_DS1307) || defined(CONFIG_RTC_DRV_DS1307_MODULE)
-static struct i2c_board_info __initdata colibri_i2c_devs[] = {
-	{
-		I2C_BOARD_INFO("m41t00", 0x68),
-	},
-};
-
-static void __init colibri_rtc_init(void)
-{
-	pxa_set_i2c_info(NULL);
-	i2c_register_board_info(0, ARRAY_AND_SIZE(colibri_i2c_devs));
-}
-#else
-static inline void colibri_rtc_init(void) {}
-#endif
-
-void __init colibri_evalboard_init(void)
-{
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	colibri_mmc_init();
-	colibri_uhc_init();
-	colibri_rtc_init();
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/colibri-pxa270-income.c b/ANDROID_3.4.5/arch/arm/mach-pxa/colibri-pxa270-income.c
deleted file mode 100644
index 248804bb..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/colibri-pxa270-income.c
+++ /dev/null
@@ -1,223 +0,0 @@
-/*
- * linux/arch/arm/mach-pxa/income.c
- *
- * Support for Income s.r.o. SH-Dmaster PXA270 SBC
- *
- * Copyright (C) 2010
- * Marek Vasut <marek.vasut@gmail.com>
- * Pavel Revak <palo@bielyvlk.sk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/bitops.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/pwm_backlight.h>
-#include <linux/i2c/pxa-i2c.h>
-
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <mach/hardware.h>
-#include <mach/mmc.h>
-#include <mach/ohci.h>
-#include <mach/pxa27x.h>
-#include <mach/pxa27x-udc.h>
-#include <mach/pxafb.h>
-
-#include "devices.h"
-#include "generic.h"
-
-#define GPIO114_INCOME_ETH_IRQ  (114)
-#define GPIO0_INCOME_SD_DETECT  (0)
-#define GPIO0_INCOME_SD_RO      (1)
-#define GPIO54_INCOME_LED_A     (54)
-#define GPIO55_INCOME_LED_B     (55)
-#define GPIO113_INCOME_TS_IRQ   (113)
-
-/******************************************************************************
- * SD/MMC card controller
- ******************************************************************************/
-#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
-static struct pxamci_platform_data income_mci_platform_data = {
-	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.gpio_power		= -1,
-	.gpio_card_detect	= GPIO0_INCOME_SD_DETECT,
-	.gpio_card_ro		= GPIO0_INCOME_SD_RO,
-	.detect_delay_ms	= 200,
-};
-
-static void __init income_mmc_init(void)
-{
-	pxa_set_mci_info(&income_mci_platform_data);
-}
-#else
-static inline void income_mmc_init(void) {}
-#endif
-
-/******************************************************************************
- * USB Host
- ******************************************************************************/
-#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-static struct pxaohci_platform_data income_ohci_info = {
-	.port_mode	= PMM_PERPORT_MODE,
-	.flags		= ENABLE_PORT1 | POWER_CONTROL_LOW | POWER_SENSE_LOW,
-};
-
-static void __init income_uhc_init(void)
-{
-	pxa_set_ohci_info(&income_ohci_info);
-}
-#else
-static inline void income_uhc_init(void) {}
-#endif
-
-/******************************************************************************
- * LED
- ******************************************************************************/
-#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
-struct gpio_led income_gpio_leds[] = {
-	{
-		.name			= "income:green:leda",
-		.default_trigger	= "none",
-		.gpio			= GPIO54_INCOME_LED_A,
-		.active_low		= 1,
-	},
-	{
-		.name			= "income:green:ledb",
-		.default_trigger	= "none",
-		.gpio			= GPIO55_INCOME_LED_B,
-		.active_low		= 1,
-	}
-};
-
-static struct gpio_led_platform_data income_gpio_led_info = {
-	.leds		= income_gpio_leds,
-	.num_leds	= ARRAY_SIZE(income_gpio_leds),
-};
-
-static struct platform_device income_leds = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &income_gpio_led_info,
-	}
-};
-
-static void __init income_led_init(void)
-{
-	platform_device_register(&income_leds);
-}
-#else
-static inline void income_led_init(void) {}
-#endif
-
-/******************************************************************************
- * I2C
- ******************************************************************************/
-#if defined(CONFIG_I2C_PXA) || defined(CONFIG_I2C_PXA_MODULE)
-static struct i2c_board_info __initdata income_i2c_devs[] = {
-	{
-		I2C_BOARD_INFO("ds1340", 0x68),
-	}, {
-		I2C_BOARD_INFO("lm75", 0x4f),
-	},
-};
-
-static void __init income_i2c_init(void)
-{
-	pxa_set_i2c_info(NULL);
-	pxa27x_set_i2c_power_info(NULL);
-	i2c_register_board_info(0, ARRAY_AND_SIZE(income_i2c_devs));
-}
-#else
-static inline void income_i2c_init(void) {}
-#endif
-
-/******************************************************************************
- * Framebuffer
- ******************************************************************************/
-#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
-static struct pxafb_mode_info income_lcd_modes[] = {
-{
-	.pixclock	= 144700,
-	.xres		= 320,
-	.yres		= 240,
-	.bpp		= 32,
-	.depth		= 18,
-
-	.left_margin	= 10,
-	.right_margin	= 10,
-	.upper_margin	= 7,
-	.lower_margin	= 8,
-
-	.hsync_len	= 20,
-	.vsync_len	= 2,
-
-	.sync		= FB_SYNC_VERT_HIGH_ACT,
-},
-};
-
-static struct pxafb_mach_info income_lcd_screen = {
-	.modes		= income_lcd_modes,
-	.num_modes	= ARRAY_SIZE(income_lcd_modes),
-	.lcd_conn	= LCD_COLOR_TFT_18BPP | LCD_PCLK_EDGE_FALL,
-};
-
-static void __init income_lcd_init(void)
-{
-	pxa_set_fb_info(NULL, &income_lcd_screen);
-}
-#else
-static inline void income_lcd_init(void) {}
-#endif
-
-/******************************************************************************
- * Backlight
- ******************************************************************************/
-#if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE)
-static struct platform_pwm_backlight_data income_backlight_data = {
-	.pwm_id		= 0,
-	.max_brightness	= 0x3ff,
-	.dft_brightness	= 0x1ff,
-	.pwm_period_ns	= 1000000,
-};
-
-static struct platform_device income_backlight = {
-	.name	= "pwm-backlight",
-	.dev	= {
-		.parent		= &pxa27x_device_pwm0.dev,
-		.platform_data	= &income_backlight_data,
-	},
-};
-
-static void __init income_pwm_init(void)
-{
-	platform_device_register(&income_backlight);
-}
-#else
-static inline void income_pwm_init(void) {}
-#endif
-
-void __init colibri_pxa270_income_boardinit(void)
-{
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	income_mmc_init();
-	income_uhc_init();
-	income_led_init();
-	income_i2c_init();
-	income_lcd_init();
-	income_pwm_init();
-}
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/colibri-pxa270.c b/ANDROID_3.4.5/arch/arm/mach-pxa/colibri-pxa270.c
deleted file mode 100644
index b2f227d3..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/colibri-pxa270.c
+++ /dev/null
@@ -1,330 +0,0 @@
-/*
- *  linux/arch/arm/mach-pxa/colibri-pxa270.c
- *
- *  Support for Toradex PXA270 based Colibri module
- *  Daniel Mack <daniel@caiaq.de>
- *  Marek Vasut <marek.vasut@gmail.com>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/moduleparam.h>
-#include <linux/kernel.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/platform_device.h>
-#include <linux/ucb1400.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
-#include <asm/mach-types.h>
-#include <asm/sizes.h>
-
-#include <mach/audio.h>
-#include <mach/colibri.h>
-#include <mach/pxa27x.h>
-
-#include "devices.h"
-#include "generic.h"
-
-/******************************************************************************
- * Evaluation board MFP
- ******************************************************************************/
-#ifdef	 CONFIG_MACH_COLIBRI_EVALBOARD
-static mfp_cfg_t colibri_pxa270_evalboard_pin_config[] __initdata = {
-	/* MMC */
-	GPIO32_MMC_CLK,
-	GPIO92_MMC_DAT_0,
-	GPIO109_MMC_DAT_1,
-	GPIO110_MMC_DAT_2,
-	GPIO111_MMC_DAT_3,
-	GPIO112_MMC_CMD,
-	GPIO0_GPIO,	/* SD detect */
-
-	/* FFUART */
-	GPIO39_FFUART_TXD,
-	GPIO34_FFUART_RXD,
-
-	/* UHC */
-	GPIO88_USBH1_PWR,
-	GPIO89_USBH1_PEN,
-	GPIO119_USBH2_PWR,
-	GPIO120_USBH2_PEN,
-
-	/* PCMCIA */
-	GPIO85_nPCE_1,
-	GPIO54_nPCE_2,
-	GPIO55_nPREG,
-	GPIO50_nPIOR,
-	GPIO51_nPIOW,
-	GPIO49_nPWE,
-	GPIO48_nPOE,
-	GPIO57_nIOIS16,
-	GPIO56_nPWAIT,
-	GPIO104_PSKTSEL,
-	GPIO53_GPIO,	/* RESET */
-	GPIO83_GPIO,	/* BVD1 */
-	GPIO82_GPIO,	/* BVD2 */
-	GPIO1_GPIO,	/* READY */
-	GPIO84_GPIO,	/* DETECT */
-	GPIO107_GPIO,	/* PPEN */
-
-	/* I2C */
-	GPIO117_I2C_SCL,
-	GPIO118_I2C_SDA,
-};
-#else
-static mfp_cfg_t colibri_pxa270_evalboard_pin_config[] __initdata = {};
-#endif
-
-#ifdef	CONFIG_MACH_COLIBRI_PXA270_INCOME
-static mfp_cfg_t income_pin_config[] __initdata = {
-	/* MMC */
-	GPIO32_MMC_CLK,
-	GPIO92_MMC_DAT_0,
-	GPIO109_MMC_DAT_1,
-	GPIO110_MMC_DAT_2,
-	GPIO111_MMC_DAT_3,
-	GPIO112_MMC_CMD,
-	GPIO0_GPIO,	/* SD detect */
-	GPIO1_GPIO,	/* SD read-only */
-
-	/* FFUART */
-	GPIO39_FFUART_TXD,
-	GPIO34_FFUART_RXD,
-
-	/* BFUART */
-	GPIO42_BTUART_RXD,
-	GPIO43_BTUART_TXD,
-	GPIO45_BTUART_RTS,
-
-	/* STUART */
-	GPIO46_STUART_RXD,
-	GPIO47_STUART_TXD,
-
-	/* UHC */
-	GPIO88_USBH1_PWR,
-	GPIO89_USBH1_PEN,
-
-	/* LCD */
-	GPIOxx_LCD_TFT_16BPP,
-
-	/* PWM */
-	GPIO16_PWM0_OUT,
-
-	/* I2C */
-	GPIO117_I2C_SCL,
-	GPIO118_I2C_SDA,
-
-	/* LED */
-	GPIO54_GPIO,	/* LED A */
-	GPIO55_GPIO,	/* LED B */
-};
-#else
-static mfp_cfg_t income_pin_config[] __initdata = {};
-#endif
-
-/******************************************************************************
- * Pin configuration
- ******************************************************************************/
-static mfp_cfg_t colibri_pxa270_pin_config[] __initdata = {
-	/* Ethernet */
-	GPIO78_nCS_2,	/* Ethernet CS */
-	GPIO114_GPIO,	/* Ethernet IRQ */
-
-	/* AC97 */
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-	GPIO95_AC97_nRESET,
-	GPIO98_AC97_SYSCLK,
-	GPIO113_GPIO,	/* Touchscreen IRQ */
-};
-
-/******************************************************************************
- * NOR Flash
- ******************************************************************************/
-#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
-static struct mtd_partition colibri_partitions[] = {
-	{
-		.name =		"Bootloader",
-		.offset =	0x00000000,
-		.size =		0x00040000,
-		.mask_flags =	MTD_WRITEABLE	/* force read-only */
-	}, {
-		.name =		"Kernel",
-		.offset =	0x00040000,
-		.size =		0x00400000,
-		.mask_flags =	0
-	}, {
-		.name =		"Rootfs",
-		.offset =	0x00440000,
-		.size =		MTDPART_SIZ_FULL,
-		.mask_flags =	0
-	}
-};
-
-static struct physmap_flash_data colibri_flash_data[] = {
-	{
-		.width		= 4,			/* bankwidth in bytes */
-		.parts		= colibri_partitions,
-		.nr_parts	= ARRAY_SIZE(colibri_partitions)
-	}
-};
-
-static struct resource colibri_pxa270_flash_resource = {
-	.start	= PXA_CS0_PHYS,
-	.end	= PXA_CS0_PHYS + SZ_32M - 1,
-	.flags	= IORESOURCE_MEM,
-};
-
-static struct platform_device colibri_pxa270_flash_device = {
-	.name	= "physmap-flash",
-	.id	= 0,
-	.dev 	= {
-		.platform_data = colibri_flash_data,
-	},
-	.resource = &colibri_pxa270_flash_resource,
-	.num_resources = 1,
-};
-
-static void __init colibri_pxa270_nor_init(void)
-{
-	platform_device_register(&colibri_pxa270_flash_device);
-}
-#else
-static inline void colibri_pxa270_nor_init(void) {}
-#endif
-
-/******************************************************************************
- * Ethernet
- ******************************************************************************/
-#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
-static struct resource colibri_pxa270_dm9000_resources[] = {
-	{
-		.start	= PXA_CS2_PHYS,
-		.end	= PXA_CS2_PHYS + 3,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= PXA_CS2_PHYS + 4,
-		.end	= PXA_CS2_PHYS + 4 + 500,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= PXA_GPIO_TO_IRQ(GPIO114_COLIBRI_PXA270_ETH_IRQ),
-		.end	= PXA_GPIO_TO_IRQ(GPIO114_COLIBRI_PXA270_ETH_IRQ),
-		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_RISING,
-	},
-};
-
-static struct platform_device colibri_pxa270_dm9000_device = {
-	.name		= "dm9000",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(colibri_pxa270_dm9000_resources),
-	.resource	= colibri_pxa270_dm9000_resources,
-};
-
-static void __init colibri_pxa270_eth_init(void)
-{
-	platform_device_register(&colibri_pxa270_dm9000_device);
-}
-#else
-static inline void colibri_pxa270_eth_init(void) {}
-#endif
-
-/******************************************************************************
- * Audio and Touchscreen
- ******************************************************************************/
-#if	defined(CONFIG_TOUCHSCREEN_UCB1400) || \
-	defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE)
-static pxa2xx_audio_ops_t colibri_pxa270_ac97_pdata = {
-	.reset_gpio	= 95,
-};
-
-static struct ucb1400_pdata colibri_pxa270_ucb1400_pdata = {
-	.irq		= PXA_GPIO_TO_IRQ(GPIO113_COLIBRI_PXA270_TS_IRQ),
-};
-
-static struct platform_device colibri_pxa270_ucb1400_device = {
-	.name		= "ucb1400_core",
-	.id		= -1,
-	.dev		= {
-		.platform_data = &colibri_pxa270_ucb1400_pdata,
-	},
-};
-
-static void __init colibri_pxa270_tsc_init(void)
-{
-	pxa_set_ac97_info(&colibri_pxa270_ac97_pdata);
-	platform_device_register(&colibri_pxa270_ucb1400_device);
-}
-#else
-static inline void colibri_pxa270_tsc_init(void) {}
-#endif
-
-static int colibri_pxa270_baseboard;
-core_param(colibri_pxa270_baseboard, colibri_pxa270_baseboard, int, 0444);
-
-static void __init colibri_pxa270_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa270_pin_config));
-
-	colibri_pxa270_nor_init();
-	colibri_pxa270_eth_init();
-	colibri_pxa270_tsc_init();
-
-	switch (colibri_pxa270_baseboard) {
-	case COLIBRI_EVALBOARD:
-		pxa2xx_mfp_config(ARRAY_AND_SIZE(
-			colibri_pxa270_evalboard_pin_config));
-		colibri_evalboard_init();
-		break;
-	case COLIBRI_PXA270_INCOME:
-		pxa2xx_mfp_config(ARRAY_AND_SIZE(income_pin_config));
-		colibri_pxa270_income_boardinit();
-		break;
-	default:
-		printk(KERN_ERR "Illegal colibri_pxa270_baseboard type %d\n",
-				colibri_pxa270_baseboard);
-	}
-}
-
-/* The "Income s.r.o. SH-Dmaster PXA270 SBC" board can be booted either
- * with the INCOME mach type or with COLIBRI and the kernel parameter
- * "colibri_pxa270_baseboard=1"
- */
-static void __init colibri_pxa270_income_init(void)
-{
-	colibri_pxa270_baseboard = COLIBRI_PXA270_INCOME;
-	colibri_pxa270_init();
-}
-
-MACHINE_START(COLIBRI, "Toradex Colibri PXA270")
-	.atag_offset	= 0x100,
-	.init_machine	= colibri_pxa270_init,
-	.map_io		= pxa27x_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa27x_init_irq,
-	.handle_irq	= pxa27x_handle_irq,
-	.timer		= &pxa_timer,
-	.restart	= pxa_restart,
-MACHINE_END
-
-MACHINE_START(INCOME, "Income s.r.o. SH-Dmaster PXA270 SBC")
-	.atag_offset	= 0x100,
-	.init_machine	= colibri_pxa270_income_init,
-	.map_io		= pxa27x_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa27x_init_irq,
-	.handle_irq	= pxa27x_handle_irq,
-	.timer		= &pxa_timer,
-	.restart	= pxa_restart,
-MACHINE_END
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/colibri-pxa300.c b/ANDROID_3.4.5/arch/arm/mach-pxa/colibri-pxa300.c
deleted file mode 100644
index bb6def8e..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/colibri-pxa300.c
+++ /dev/null
@@ -1,195 +0,0 @@
-/*
- *  arch/arm/mach-pxa/colibri-pxa300.c
- *
- *  Support for Toradex PXA300/310 based Colibri module
- *
- *  Daniel Mack <daniel@caiaq.de>
- *  Matthias Meier <matthias.j.meier@gmx.net>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/interrupt.h>
-
-#include <asm/mach-types.h>
-#include <asm/sizes.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/irq.h>
-
-#include <mach/pxa300.h>
-#include <mach/colibri.h>
-#include <mach/ohci.h>
-#include <mach/pxafb.h>
-#include <mach/audio.h>
-
-#include "generic.h"
-#include "devices.h"
-
-
-#ifdef CONFIG_MACH_COLIBRI_EVALBOARD
-static mfp_cfg_t colibri_pxa300_evalboard_pin_config[] __initdata = {
-	/* MMC */
-	GPIO7_MMC1_CLK,
-	GPIO14_MMC1_CMD,
-	GPIO3_MMC1_DAT0,
-	GPIO4_MMC1_DAT1,
-	GPIO5_MMC1_DAT2,
-	GPIO6_MMC1_DAT3,
-	GPIO13_GPIO,	/* GPIO13_COLIBRI_PXA300_SD_DETECT */
-
-	/* UHC */
-	GPIO0_2_USBH_PEN,
-	GPIO1_2_USBH_PWR,
-	GPIO77_USB_P3_1,
-	GPIO78_USB_P3_2,
-	GPIO79_USB_P3_3,
-	GPIO80_USB_P3_4,
-	GPIO81_USB_P3_5,
-	GPIO82_USB_P3_6,
-
-	/* I2C */
-	GPIO21_I2C_SCL,
-	GPIO22_I2C_SDA,
-};
-#else
-static mfp_cfg_t colibri_pxa300_evalboard_pin_config[] __initdata = {};
-#endif
-
-#if defined(CONFIG_AX88796)
-#define COLIBRI_ETH_IRQ_GPIO	mfp_to_gpio(GPIO26_GPIO)
-/*
- * Asix AX88796 Ethernet
- */
-static struct ax_plat_data colibri_asix_platdata = {
-	.flags		= 0, /* defined later */
-	.wordlength	= 2,
-};
-
-static struct resource colibri_asix_resource[] = {
-	[0] = {
-		.start = PXA3xx_CS2_PHYS,
-		.end   = PXA3xx_CS2_PHYS + (0x20 * 2) - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = PXA_GPIO_TO_IRQ(COLIBRI_ETH_IRQ_GPIO),
-		.end   = PXA_GPIO_TO_IRQ(COLIBRI_ETH_IRQ_GPIO),
-		.flags = IORESOURCE_IRQ | IRQF_TRIGGER_FALLING,
-	}
-};
-
-static struct platform_device asix_device = {
-	.name		= "ax88796",
-	.id		= 0,
-	.num_resources 	= ARRAY_SIZE(colibri_asix_resource),
-	.resource	= colibri_asix_resource,
-	.dev		= {
-		.platform_data = &colibri_asix_platdata
-	}
-};
-
-static mfp_cfg_t colibri_pxa300_eth_pin_config[] __initdata = {
-	GPIO1_nCS2,			/* AX88796 chip select */
-	GPIO26_GPIO | MFP_PULL_HIGH	/* AX88796 IRQ */
-};
-
-static void __init colibri_pxa300_init_eth(void)
-{
-	colibri_pxa3xx_init_eth(&colibri_asix_platdata);
-	pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa300_eth_pin_config));
-	platform_device_register(&asix_device);
-}
-#else
-static inline void __init colibri_pxa300_init_eth(void) {}
-#endif /* CONFIG_AX88796 */
-
-#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
-static mfp_cfg_t colibri_pxa300_lcd_pin_config[] __initdata = {
-	GPIO54_LCD_LDD_0,
-	GPIO55_LCD_LDD_1,
-	GPIO56_LCD_LDD_2,
-	GPIO57_LCD_LDD_3,
-	GPIO58_LCD_LDD_4,
-	GPIO59_LCD_LDD_5,
-	GPIO60_LCD_LDD_6,
-	GPIO61_LCD_LDD_7,
-	GPIO62_LCD_LDD_8,
-	GPIO63_LCD_LDD_9,
-	GPIO64_LCD_LDD_10,
-	GPIO65_LCD_LDD_11,
-	GPIO66_LCD_LDD_12,
-	GPIO67_LCD_LDD_13,
-	GPIO68_LCD_LDD_14,
-	GPIO69_LCD_LDD_15,
-	GPIO70_LCD_LDD_16,
-	GPIO71_LCD_LDD_17,
-	GPIO62_LCD_CS_N,
-	GPIO72_LCD_FCLK,
-	GPIO73_LCD_LCLK,
-	GPIO74_LCD_PCLK,
-	GPIO75_LCD_BIAS,
-	GPIO76_LCD_VSYNC,
-};
-
-static void __init colibri_pxa300_init_lcd(void)
-{
-	pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa300_lcd_pin_config));
-}
-
-#else
-static inline void colibri_pxa300_init_lcd(void) {}
-#endif /* CONFIG_FB_PXA || CONFIG_FB_PXA_MODULE */
-
-#if defined(CONFIG_SND_AC97_CODEC) || defined(CONFIG_SND_AC97_CODEC_MODULE)
-static mfp_cfg_t colibri_pxa310_ac97_pin_config[] __initdata = {
-	GPIO24_AC97_SYSCLK,
-	GPIO23_AC97_nACRESET,
-	GPIO25_AC97_SDATA_IN_0,
-	GPIO27_AC97_SDATA_OUT,
-	GPIO28_AC97_SYNC,
-	GPIO29_AC97_BITCLK
-};
-
-static inline void __init colibri_pxa310_init_ac97(void)
-{
-	/* no AC97 codec on Colibri PXA300 */
-	if (!cpu_is_pxa310())
-		return;
-
-	pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa310_ac97_pin_config));
-	pxa_set_ac97_info(NULL);
-}
-#else
-static inline void colibri_pxa310_init_ac97(void) {}
-#endif
-
-void __init colibri_pxa300_init(void)
-{
-	colibri_pxa300_init_eth();
-	colibri_pxa3xx_init_nand();
-	colibri_pxa300_init_lcd();
-	colibri_pxa3xx_init_lcd(mfp_to_gpio(GPIO39_GPIO));
-	colibri_pxa310_init_ac97();
-
-	/* Evalboard init */
-	pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa300_evalboard_pin_config));
-	colibri_evalboard_init();
-}
-
-MACHINE_START(COLIBRI300, "Toradex Colibri PXA300")
-	.atag_offset	= 0x100,
-	.init_machine	= colibri_pxa300_init,
-	.map_io		= pxa3xx_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa3xx_init_irq,
-	.handle_irq	= pxa3xx_handle_irq,
-	.timer		= &pxa_timer,
-	.restart	= pxa_restart,
-MACHINE_END
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/colibri-pxa320.c b/ANDROID_3.4.5/arch/arm/mach-pxa/colibri-pxa320.c
deleted file mode 100644
index d88e7b37..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/colibri-pxa320.c
+++ /dev/null
@@ -1,265 +0,0 @@
-/*
- *  arch/arm/mach-pxa/colibri-pxa320.c
- *
- *  Support for Toradex PXA320/310 based Colibri module
- *
- *  Daniel Mack <daniel@caiaq.de>
- *  Matthias Meier <matthias.j.meier@gmx.net>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/interrupt.h>
-#include <linux/usb/gpio_vbus.h>
-
-#include <asm/mach-types.h>
-#include <asm/sizes.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/irq.h>
-
-#include <mach/pxa320.h>
-#include <mach/colibri.h>
-#include <mach/pxafb.h>
-#include <mach/ohci.h>
-#include <mach/audio.h>
-#include <mach/pxa27x-udc.h>
-#include <mach/udc.h>
-
-#include "generic.h"
-#include "devices.h"
-
-#ifdef	CONFIG_MACH_COLIBRI_EVALBOARD
-static mfp_cfg_t colibri_pxa320_evalboard_pin_config[] __initdata = {
-	/* MMC */
-	GPIO22_MMC1_CLK,
-	GPIO23_MMC1_CMD,
-	GPIO18_MMC1_DAT0,
-	GPIO19_MMC1_DAT1,
-	GPIO20_MMC1_DAT2,
-	GPIO21_MMC1_DAT3,
-	GPIO28_GPIO,	/* SD detect */
-
-	/* UART 1 configuration (may be set by bootloader) */
-	GPIO99_UART1_CTS,
-	GPIO104_UART1_RTS,
-	GPIO97_UART1_RXD,
-	GPIO98_UART1_TXD,
-	GPIO101_UART1_DTR,
-	GPIO103_UART1_DSR,
-	GPIO100_UART1_DCD,
-	GPIO102_UART1_RI,
-
-	/* UART 2 configuration */
-	GPIO109_UART2_CTS,
-	GPIO112_UART2_RTS,
-	GPIO110_UART2_RXD,
-	GPIO111_UART2_TXD,
-
-	/* UART 3 configuration */
-	GPIO30_UART3_RXD,
-	GPIO31_UART3_TXD,
-
-	/* UHC */
-	GPIO2_2_USBH_PEN,
-	GPIO3_2_USBH_PWR,
-
-	/* I2C */
-	GPIO32_I2C_SCL,
-	GPIO33_I2C_SDA,
-
-	/* PCMCIA */
-	MFP_CFG(GPIO59, AF7),	/* PRST ; AF7 to tristate */
-	MFP_CFG(GPIO61, AF7),	/* PCE1 ; AF7 to tristate */
-	MFP_CFG(GPIO60, AF7),	/* PCE2 ; AF7 to tristate */
-	MFP_CFG(GPIO62, AF7),	/* PCD ; AF7 to tristate */
-	MFP_CFG(GPIO56, AF7),	/* PSKTSEL ; AF7 to tristate */
-	GPIO27_GPIO,		/* RDnWR ; input/tristate */
-	GPIO50_GPIO,		/* PREG ; input/tristate */
-	GPIO2_RDY,
-	GPIO5_NPIOR,
-	GPIO6_NPIOW,
-	GPIO7_NPIOS16,
-	GPIO8_NPWAIT,
-	GPIO29_GPIO,		/* PRDY (READY GPIO) */
-	GPIO57_GPIO,		/* PPEN (POWER GPIO) */
-	GPIO81_GPIO,		/* PCD (DETECT GPIO) */
-	GPIO77_GPIO,		/* PRST (RESET GPIO) */
-	GPIO53_GPIO,		/* PBVD1 */
-	GPIO79_GPIO,		/* PBVD2 */
-	GPIO54_GPIO,		/* POE */
-};
-#else
-static mfp_cfg_t colibri_pxa320_evalboard_pin_config[] __initdata = {};
-#endif
-
-#if defined(CONFIG_AX88796)
-#define COLIBRI_ETH_IRQ_GPIO	mfp_to_gpio(GPIO36_GPIO)
-/*
- * Asix AX88796 Ethernet
- */
-static struct ax_plat_data colibri_asix_platdata = {
-	.flags		= 0, /* defined later */
-	.wordlength	= 2,
-};
-
-static struct resource colibri_asix_resource[] = {
-	[0] = {
-		.start = PXA3xx_CS2_PHYS,
-		.end   = PXA3xx_CS2_PHYS + (0x20 * 2) - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = PXA_GPIO_TO_IRQ(COLIBRI_ETH_IRQ_GPIO),
-		.end   = PXA_GPIO_TO_IRQ(COLIBRI_ETH_IRQ_GPIO),
-		.flags = IORESOURCE_IRQ | IRQF_TRIGGER_FALLING,
-	}
-};
-
-static struct platform_device asix_device = {
-	.name		= "ax88796",
-	.id		= 0,
-	.num_resources 	= ARRAY_SIZE(colibri_asix_resource),
-	.resource	= colibri_asix_resource,
-	.dev		= {
-		.platform_data = &colibri_asix_platdata
-	}
-};
-
-static mfp_cfg_t colibri_pxa320_eth_pin_config[] __initdata = {
-	GPIO3_nCS2,			/* AX88796 chip select */
-	GPIO36_GPIO | MFP_PULL_HIGH	/* AX88796 IRQ */
-};
-
-static void __init colibri_pxa320_init_eth(void)
-{
-	colibri_pxa3xx_init_eth(&colibri_asix_platdata);
-	pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa320_eth_pin_config));
-	platform_device_register(&asix_device);
-}
-#else
-static inline void __init colibri_pxa320_init_eth(void) {}
-#endif /* CONFIG_AX88796 */
-
-#if defined(CONFIG_USB_PXA27X)||defined(CONFIG_USB_PXA27X_MODULE)
-static struct gpio_vbus_mach_info colibri_pxa320_gpio_vbus_info = {
-	.gpio_vbus		= mfp_to_gpio(MFP_PIN_GPIO96),
-	.gpio_pullup		= -1,
-};
-
-static struct platform_device colibri_pxa320_gpio_vbus = {
-	.name	= "gpio-vbus",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &colibri_pxa320_gpio_vbus_info,
-	},
-};
-
-static void colibri_pxa320_udc_command(int cmd)
-{
-	if (cmd == PXA2XX_UDC_CMD_CONNECT)
-		UP2OCR = UP2OCR_HXOE | UP2OCR_DPPUE;
-	else if (cmd == PXA2XX_UDC_CMD_DISCONNECT)
-		UP2OCR = UP2OCR_HXOE;
-}
-
-static struct pxa2xx_udc_mach_info colibri_pxa320_udc_info __initdata = {
-	.udc_command		= colibri_pxa320_udc_command,
-	.gpio_pullup		= -1,
-};
-
-static void __init colibri_pxa320_init_udc(void)
-{
-	pxa_set_udc_info(&colibri_pxa320_udc_info);
-	platform_device_register(&colibri_pxa320_gpio_vbus);
-}
-#else
-static inline void colibri_pxa320_init_udc(void) {}
-#endif
-
-#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
-static mfp_cfg_t colibri_pxa320_lcd_pin_config[] __initdata = {
-	GPIO6_2_LCD_LDD_0,
-	GPIO7_2_LCD_LDD_1,
-	GPIO8_2_LCD_LDD_2,
-	GPIO9_2_LCD_LDD_3,
-	GPIO10_2_LCD_LDD_4,
-	GPIO11_2_LCD_LDD_5,
-	GPIO12_2_LCD_LDD_6,
-	GPIO13_2_LCD_LDD_7,
-	GPIO63_LCD_LDD_8,
-	GPIO64_LCD_LDD_9,
-	GPIO65_LCD_LDD_10,
-	GPIO66_LCD_LDD_11,
-	GPIO67_LCD_LDD_12,
-	GPIO68_LCD_LDD_13,
-	GPIO69_LCD_LDD_14,
-	GPIO70_LCD_LDD_15,
-	GPIO71_LCD_LDD_16,
-	GPIO72_LCD_LDD_17,
-	GPIO73_LCD_CS_N,
-	GPIO74_LCD_VSYNC,
-	GPIO14_2_LCD_FCLK,
-	GPIO15_2_LCD_LCLK,
-	GPIO16_2_LCD_PCLK,
-	GPIO17_2_LCD_BIAS,
-};
-
-static void __init colibri_pxa320_init_lcd(void)
-{
-	pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa320_lcd_pin_config));
-}
-#else
-static inline void colibri_pxa320_init_lcd(void) {}
-#endif
-
-#if	defined(CONFIG_SND_AC97_CODEC) || \
-	defined(CONFIG_SND_AC97_CODEC_MODULE)
-static mfp_cfg_t colibri_pxa320_ac97_pin_config[] __initdata = {
-	GPIO34_AC97_SYSCLK,
-	GPIO35_AC97_SDATA_IN_0,
-	GPIO37_AC97_SDATA_OUT,
-	GPIO38_AC97_SYNC,
-	GPIO39_AC97_BITCLK,
-	GPIO40_AC97_nACRESET
-};
-
-static inline void __init colibri_pxa320_init_ac97(void)
-{
-	pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa320_ac97_pin_config));
-	pxa_set_ac97_info(NULL);
-}
-#else
-static inline void colibri_pxa320_init_ac97(void) {}
-#endif
-
-void __init colibri_pxa320_init(void)
-{
-	colibri_pxa320_init_eth();
-	colibri_pxa3xx_init_nand();
-	colibri_pxa320_init_lcd();
-	colibri_pxa3xx_init_lcd(mfp_to_gpio(GPIO49_GPIO));
-	colibri_pxa320_init_ac97();
-	colibri_pxa320_init_udc();
-
-	/* Evalboard init */
-	pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa320_evalboard_pin_config));
-	colibri_evalboard_init();
-}
-
-MACHINE_START(COLIBRI320, "Toradex Colibri PXA320")
-	.atag_offset	= 0x100,
-	.init_machine	= colibri_pxa320_init,
-	.map_io		= pxa3xx_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa3xx_init_irq,
-	.handle_irq	= pxa3xx_handle_irq,
-	.timer		= &pxa_timer,
-	.restart	= pxa_restart,
-MACHINE_END
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/colibri-pxa3xx.c b/ANDROID_3.4.5/arch/arm/mach-pxa/colibri-pxa3xx.c
deleted file mode 100644
index 68cc75fa..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/colibri-pxa3xx.c
+++ /dev/null
@@ -1,153 +0,0 @@
-/*
- *  arch/arm/mach-pxa/colibri-pxa3xx.c
- *
- *  Common functions for all Toradex PXA3xx modules
- *
- *  Daniel Mack <daniel@caiaq.de>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/etherdevice.h>
-#include <asm/mach-types.h>
-#include <mach/hardware.h>
-#include <asm/sizes.h>
-#include <asm/system_info.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/irq.h>
-#include <mach/pxa3xx-regs.h>
-#include <mach/mfp-pxa300.h>
-#include <mach/colibri.h>
-#include <mach/mmc.h>
-#include <mach/pxafb.h>
-#include <plat/pxa3xx_nand.h>
-
-#include "generic.h"
-#include "devices.h"
-
-#if defined(CONFIG_AX88796)
-#define ETHER_ADDR_LEN 6
-static u8 ether_mac_addr[ETHER_ADDR_LEN];
-
-void __init colibri_pxa3xx_init_eth(struct ax_plat_data *plat_data)
-{
-	int i;
-	u64 serial = ((u64) system_serial_high << 32) | system_serial_low;
-
-	/*
-	 * If the bootloader passed in a serial boot tag, which contains a
-	 * valid ethernet MAC, pass it to the interface. Toradex ships the
-	 * modules with their own bootloader which provides a valid MAC
-	 * this way.
-	 */
-
-	for (i = 0; i < ETHER_ADDR_LEN; i++) {
-		ether_mac_addr[i] = serial & 0xff;
-		serial >>= 8;
-	}
-
-	if (is_valid_ether_addr(ether_mac_addr)) {
-		plat_data->flags |= AXFLG_MAC_FROMPLATFORM;
-		plat_data->mac_addr = ether_mac_addr;
-		printk(KERN_INFO "%s(): taking MAC from serial boot tag\n",
-			__func__);
-	} else {
-		plat_data->flags |= AXFLG_MAC_FROMDEV;
-		printk(KERN_INFO "%s(): no valid serial boot tag found, "
-			"taking MAC from device\n", __func__);
-	}
-}
-#endif
-
-#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
-static int lcd_bl_pin;
-
-/*
- * LCD panel (Sharp LQ043T3DX02)
- */
-static void colibri_lcd_backlight(int on)
-{
-	gpio_set_value(lcd_bl_pin, !!on);
-}
-
-static struct pxafb_mode_info sharp_lq43_mode = {
-	.pixclock	= 101936,
-	.xres		= 480,
-	.yres		= 272,
-	.bpp		= 32,
-	.depth		= 18,
-	.hsync_len      = 41,
-	.left_margin    = 2,
-	.right_margin   = 2,
-	.vsync_len      = 10,
-	.upper_margin   = 2,
-	.lower_margin   = 2,
-	.sync	   	= 0,
-	.cmap_greyscale = 0,
-};
-
-static struct pxafb_mach_info sharp_lq43_info = {
-	.modes		= &sharp_lq43_mode,
-	.num_modes	= 1,
-	.cmap_inverse	= 0,
-	.cmap_static	= 0,
-	.lcd_conn	= LCD_COLOR_TFT_18BPP,
-	.pxafb_backlight_power = colibri_lcd_backlight,
-};
-
-void __init colibri_pxa3xx_init_lcd(int bl_pin)
-{
-	lcd_bl_pin = bl_pin;
-	gpio_request(bl_pin, "lcd backlight");
-	gpio_direction_output(bl_pin, 0);
-	pxa_set_fb_info(NULL, &sharp_lq43_info);
-}
-#endif
-
-#if defined(CONFIG_MTD_NAND_PXA3xx) || defined(CONFIG_MTD_NAND_PXA3xx_MODULE)
-static struct mtd_partition colibri_nand_partitions[] = {
-	{
-		.name        = "bootloader",
-		.offset      = 0,
-		.size        = SZ_512K,
-		.mask_flags  = MTD_WRITEABLE, /* force read-only */
-	},
-	{
-		.name        = "kernel",
-		.offset      = MTDPART_OFS_APPEND,
-		.size        = SZ_4M,
-		.mask_flags  = MTD_WRITEABLE, /* force read-only */
-	},
-	{
-		.name        = "reserved",
-		.offset      = MTDPART_OFS_APPEND,
-		.size        = SZ_1M,
-		.mask_flags  = MTD_WRITEABLE, /* force read-only */
-	},
-	{
-		.name        = "fs",
-		.offset      = MTDPART_OFS_APPEND,
-		.size        = MTDPART_SIZ_FULL,
-	},
-};
-
-static struct pxa3xx_nand_platform_data colibri_nand_info = {
-	.enable_arbiter	= 1,
-	.keep_config	= 1,
-	.num_cs		= 1,
-	.parts[0]	= colibri_nand_partitions,
-	.nr_parts[0]	= ARRAY_SIZE(colibri_nand_partitions),
-};
-
-void __init colibri_pxa3xx_init_nand(void)
-{
-	pxa3xx_set_nand_info(&colibri_nand_info);
-}
-#endif
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/corgi.c b/ANDROID_3.4.5/arch/arm/mach-pxa/corgi.c
deleted file mode 100644
index c1fe32db..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/corgi.c
+++ /dev/null
@@ -1,766 +0,0 @@
-/*
- * Support for Sharp SL-C7xx PDAs
- * Models: SL-C700 (Corgi), SL-C750 (Shepherd), SL-C760 (Husky)
- *
- * Copyright (c) 2004-2005 Richard Purdie
- *
- * Based on Sharp's 2.4 kernel patches/lubbock.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/major.h>
-#include <linux/fs.h>
-#include <linux/interrupt.h>
-#include <linux/mmc/host.h>
-#include <linux/mtd/physmap.h>
-#include <linux/pm.h>
-#include <linux/gpio.h>
-#include <linux/backlight.h>
-#include <linux/i2c.h>
-#include <linux/i2c/pxa-i2c.h>
-#include <linux/io.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/ads7846.h>
-#include <linux/spi/corgi_lcd.h>
-#include <linux/spi/pxa2xx_spi.h>
-#include <linux/mtd/sharpsl.h>
-#include <linux/input/matrix_keypad.h>
-#include <linux/module.h>
-#include <video/w100fb.h>
-
-#include <asm/setup.h>
-#include <asm/memory.h>
-#include <asm/mach-types.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/pxa25x.h>
-#include <mach/irda.h>
-#include <mach/mmc.h>
-#include <mach/udc.h>
-#include <mach/corgi.h>
-#include <mach/sharpsl_pm.h>
-
-#include <asm/mach/sharpsl_param.h>
-#include <asm/hardware/scoop.h>
-
-#include "generic.h"
-#include "devices.h"
-
-static unsigned long corgi_pin_config[] __initdata = {
-	/* Static Memory I/O */
-	GPIO78_nCS_2,	/* w100fb */
-	GPIO80_nCS_4,	/* scoop */
-
-	/* SSP1 */
-	GPIO23_SSP1_SCLK,
-	GPIO25_SSP1_TXD,
-	GPIO26_SSP1_RXD,
-	GPIO24_GPIO,	/* CORGI_GPIO_ADS7846_CS - SFRM as chip select */
-
-	/* I2S */
-	GPIO28_I2S_BITCLK_OUT,
-	GPIO29_I2S_SDATA_IN,
-	GPIO30_I2S_SDATA_OUT,
-	GPIO31_I2S_SYNC,
-	GPIO32_I2S_SYSCLK,
-
-	/* Infra-Red */
-	GPIO47_FICP_TXD,
-	GPIO46_FICP_RXD,
-
-	/* FFUART */
-	GPIO40_FFUART_DTR,
-	GPIO41_FFUART_RTS,
-	GPIO39_FFUART_TXD,
-	GPIO37_FFUART_DSR,
-	GPIO34_FFUART_RXD,
-	GPIO35_FFUART_CTS,
-
-	/* PC Card */
-	GPIO48_nPOE,
-	GPIO49_nPWE,
-	GPIO50_nPIOR,
-	GPIO51_nPIOW,
-	GPIO52_nPCE_1,
-	GPIO53_nPCE_2,
-	GPIO54_nPSKTSEL,
-	GPIO55_nPREG,
-	GPIO56_nPWAIT,
-	GPIO57_nIOIS16,
-
-	/* MMC */
-	GPIO6_MMC_CLK,
-	GPIO8_MMC_CS0,
-
-	/* GPIO Matrix Keypad */
-	GPIO66_GPIO | MFP_LPM_DRIVE_HIGH,	/* column 0 */
-	GPIO67_GPIO | MFP_LPM_DRIVE_HIGH,	/* column 1 */
-	GPIO68_GPIO | MFP_LPM_DRIVE_HIGH,	/* column 2 */
-	GPIO69_GPIO | MFP_LPM_DRIVE_HIGH,	/* column 3 */
-	GPIO70_GPIO | MFP_LPM_DRIVE_HIGH,	/* column 4 */
-	GPIO71_GPIO | MFP_LPM_DRIVE_HIGH,	/* column 5 */
-	GPIO72_GPIO | MFP_LPM_DRIVE_HIGH,	/* column 6 */
-	GPIO73_GPIO | MFP_LPM_DRIVE_HIGH,	/* column 7 */
-	GPIO74_GPIO | MFP_LPM_DRIVE_HIGH,	/* column 8 */
-	GPIO75_GPIO | MFP_LPM_DRIVE_HIGH,	/* column 9 */
-	GPIO76_GPIO | MFP_LPM_DRIVE_HIGH,	/* column 10 */
-	GPIO77_GPIO | MFP_LPM_DRIVE_HIGH,	/* column 11 */
-	GPIO58_GPIO,	/* row 0 */
-	GPIO59_GPIO,	/* row 1 */
-	GPIO60_GPIO,	/* row 2 */
-	GPIO61_GPIO,	/* row 3 */
-	GPIO62_GPIO,	/* row 4 */
-	GPIO63_GPIO,	/* row 5 */
-	GPIO64_GPIO,	/* row 6 */
-	GPIO65_GPIO,	/* row 7 */
-
-	/* GPIO */
-	GPIO9_GPIO,				/* CORGI_GPIO_nSD_DETECT */
-	GPIO7_GPIO,				/* CORGI_GPIO_nSD_WP */
-	GPIO11_GPIO | WAKEUP_ON_EDGE_BOTH,	/* CORGI_GPIO_MAIN_BAT_{LOW,COVER} */
-	GPIO13_GPIO | MFP_LPM_KEEP_OUTPUT,	/* CORGI_GPIO_LED_ORANGE */
-	GPIO21_GPIO,				/* CORGI_GPIO_ADC_TEMP */
-	GPIO22_GPIO,				/* CORGI_GPIO_IR_ON */
-	GPIO33_GPIO,				/* CORGI_GPIO_SD_PWR */
-	GPIO38_GPIO | MFP_LPM_KEEP_OUTPUT,	/* CORGI_GPIO_CHRG_ON */
-	GPIO43_GPIO | MFP_LPM_KEEP_OUTPUT,	/* CORGI_GPIO_CHRG_UKN */
-	GPIO44_GPIO,				/* CORGI_GPIO_HSYNC */
-
-	GPIO0_GPIO | WAKEUP_ON_EDGE_BOTH,	/* CORGI_GPIO_KEY_INT */
-	GPIO1_GPIO | WAKEUP_ON_EDGE_RISE,	/* CORGI_GPIO_AC_IN */
-	GPIO3_GPIO | WAKEUP_ON_EDGE_BOTH,	/* CORGI_GPIO_WAKEUP */
-};
-
-/*
- * Corgi SCOOP Device
- */
-static struct resource corgi_scoop_resources[] = {
-	[0] = {
-		.start		= 0x10800000,
-		.end		= 0x10800fff,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct scoop_config corgi_scoop_setup = {
-	.io_dir 	= CORGI_SCOOP_IO_DIR,
-	.io_out		= CORGI_SCOOP_IO_OUT,
-	.gpio_base	= CORGI_SCOOP_GPIO_BASE,
-};
-
-struct platform_device corgiscoop_device = {
-	.name		= "sharp-scoop",
-	.id		= -1,
-	.dev		= {
- 		.platform_data	= &corgi_scoop_setup,
-	},
-	.num_resources	= ARRAY_SIZE(corgi_scoop_resources),
-	.resource	= corgi_scoop_resources,
-};
-
-static struct scoop_pcmcia_dev corgi_pcmcia_scoop[] = {
-{
-	.dev        = &corgiscoop_device.dev,
-	.irq        = CORGI_IRQ_GPIO_CF_IRQ,
-	.cd_irq     = CORGI_IRQ_GPIO_CF_CD,
-	.cd_irq_str = "PCMCIA0 CD",
-},
-};
-
-static struct scoop_pcmcia_config corgi_pcmcia_config = {
-	.devs         = &corgi_pcmcia_scoop[0],
-	.num_devs     = 1,
-};
-
-static struct w100_mem_info corgi_fb_mem = {
-	.ext_cntl          = 0x00040003,
-	.sdram_mode_reg    = 0x00650021,
-	.ext_timing_cntl   = 0x10002a4a,
-	.io_cntl           = 0x7ff87012,
-	.size              = 0x1fffff,
-};
-
-static struct w100_gen_regs corgi_fb_regs = {
-	.lcd_format    = 0x00000003,
-	.lcdd_cntl1    = 0x01CC0000,
-	.lcdd_cntl2    = 0x0003FFFF,
-	.genlcd_cntl1  = 0x00FFFF0D,
-	.genlcd_cntl2  = 0x003F3003,
-	.genlcd_cntl3  = 0x000102aa,
-};
-
-static struct w100_gpio_regs corgi_fb_gpio = {
-	.init_data1   = 0x000000bf,
-	.init_data2   = 0x00000000,
-	.gpio_dir1    = 0x00000000,
-	.gpio_oe1     = 0x03c0feff,
-	.gpio_dir2    = 0x00000000,
-	.gpio_oe2     = 0x00000000,
-};
-
-static struct w100_mode corgi_fb_modes[] = {
-{
-	.xres            = 480,
-	.yres            = 640,
-	.left_margin     = 0x56,
-	.right_margin    = 0x55,
-	.upper_margin    = 0x03,
-	.lower_margin    = 0x00,
-	.crtc_ss         = 0x82360056,
-	.crtc_ls         = 0xA0280000,
-	.crtc_gs         = 0x80280028,
-	.crtc_vpos_gs    = 0x02830002,
-	.crtc_rev        = 0x00400008,
-	.crtc_dclk       = 0xA0000000,
-	.crtc_gclk       = 0x8015010F,
-	.crtc_goe        = 0x80100110,
-	.crtc_ps1_active = 0x41060010,
-	.pll_freq        = 75,
-	.fast_pll_freq   = 100,
-	.sysclk_src      = CLK_SRC_PLL,
-	.sysclk_divider  = 0,
-	.pixclk_src      = CLK_SRC_PLL,
-	.pixclk_divider  = 2,
-	.pixclk_divider_rotated = 6,
-},{
-	.xres            = 240,
-	.yres            = 320,
-	.left_margin     = 0x27,
-	.right_margin    = 0x2e,
-	.upper_margin    = 0x01,
-	.lower_margin    = 0x00,
-	.crtc_ss         = 0x81170027,
-	.crtc_ls         = 0xA0140000,
-	.crtc_gs         = 0xC0140014,
-	.crtc_vpos_gs    = 0x00010141,
-	.crtc_rev        = 0x00400008,
-	.crtc_dclk       = 0xA0000000,
-	.crtc_gclk       = 0x8015010F,
-	.crtc_goe        = 0x80100110,
-	.crtc_ps1_active = 0x41060010,
-	.pll_freq        = 0,
-	.fast_pll_freq   = 0,
-	.sysclk_src      = CLK_SRC_XTAL,
-	.sysclk_divider  = 0,
-	.pixclk_src      = CLK_SRC_XTAL,
-	.pixclk_divider  = 1,
-	.pixclk_divider_rotated = 1,
-},
-
-};
-
-static struct w100fb_mach_info corgi_fb_info = {
-	.init_mode  = INIT_MODE_ROTATED,
-	.mem        = &corgi_fb_mem,
-	.regs       = &corgi_fb_regs,
-	.modelist   = &corgi_fb_modes[0],
-	.num_modes  = 2,
-	.gpio       = &corgi_fb_gpio,
-	.xtal_freq  = 12500000,
-	.xtal_dbl   = 0,
-};
-
-static struct resource corgi_fb_resources[] = {
-	[0] = {
-		.start   = 0x08000000,
-		.end     = 0x08ffffff,
-		.flags   = IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device corgifb_device = {
-	.name           = "w100fb",
-	.id             = -1,
-	.num_resources	= ARRAY_SIZE(corgi_fb_resources),
-	.resource	= corgi_fb_resources,
-	.dev            = {
-		.platform_data = &corgi_fb_info,
-	},
-
-};
-
-/*
- * Corgi Keyboard Device
- */
-#define CORGI_KEY_CALENDER	KEY_F1
-#define CORGI_KEY_ADDRESS	KEY_F2
-#define CORGI_KEY_FN		KEY_F3
-#define CORGI_KEY_CANCEL	KEY_F4
-#define CORGI_KEY_OFF		KEY_SUSPEND
-#define CORGI_KEY_EXOK		KEY_F5
-#define CORGI_KEY_EXCANCEL	KEY_F6
-#define CORGI_KEY_EXJOGDOWN	KEY_F7
-#define CORGI_KEY_EXJOGUP	KEY_F8
-#define CORGI_KEY_JAP1		KEY_LEFTCTRL
-#define CORGI_KEY_JAP2		KEY_LEFTALT
-#define CORGI_KEY_MAIL		KEY_F10
-#define CORGI_KEY_OK		KEY_F11
-#define CORGI_KEY_MENU		KEY_F12
-
-static const uint32_t corgikbd_keymap[] = {
-	KEY(0, 1, KEY_1),
-	KEY(0, 2, KEY_3),
-	KEY(0, 3, KEY_5),
-	KEY(0, 4, KEY_6),
-	KEY(0, 5, KEY_7),
-	KEY(0, 6, KEY_9),
-	KEY(0, 7, KEY_0),
-	KEY(0, 8, KEY_BACKSPACE),
-	KEY(1, 1, KEY_2),
-	KEY(1, 2, KEY_4),
-	KEY(1, 3, KEY_R),
-	KEY(1, 4, KEY_Y),
-	KEY(1, 5, KEY_8),
-	KEY(1, 6, KEY_I),
-	KEY(1, 7, KEY_O),
-	KEY(1, 8, KEY_P),
-	KEY(2, 0, KEY_TAB),
-	KEY(2, 1, KEY_Q),
-	KEY(2, 2, KEY_E),
-	KEY(2, 3, KEY_T),
-	KEY(2, 4, KEY_G),
-	KEY(2, 5, KEY_U),
-	KEY(2, 6, KEY_J),
-	KEY(2, 7, KEY_K),
-	KEY(3, 0, CORGI_KEY_CALENDER),
-	KEY(3, 1, KEY_W),
-	KEY(3, 2, KEY_S),
-	KEY(3, 3, KEY_F),
-	KEY(3, 4, KEY_V),
-	KEY(3, 5, KEY_H),
-	KEY(3, 6, KEY_M),
-	KEY(3, 7, KEY_L),
-	KEY(3, 9, KEY_RIGHTSHIFT),
-	KEY(4, 0, CORGI_KEY_ADDRESS),
-	KEY(4, 1, KEY_A),
-	KEY(4, 2, KEY_D),
-	KEY(4, 3, KEY_C),
-	KEY(4, 4, KEY_B),
-	KEY(4, 5, KEY_N),
-	KEY(4, 6, KEY_DOT),
-	KEY(4, 8, KEY_ENTER),
-	KEY(4, 10, KEY_LEFTSHIFT),
-	KEY(5, 0, CORGI_KEY_MAIL),
-	KEY(5, 1, KEY_Z),
-	KEY(5, 2, KEY_X),
-	KEY(5, 3, KEY_MINUS),
-	KEY(5, 4, KEY_SPACE),
-	KEY(5, 5, KEY_COMMA),
-	KEY(5, 7, KEY_UP),
-	KEY(5, 11, CORGI_KEY_FN),
-	KEY(6, 0, KEY_SYSRQ),
-	KEY(6, 1, CORGI_KEY_JAP1),
-	KEY(6, 2, CORGI_KEY_JAP2),
-	KEY(6, 3, CORGI_KEY_CANCEL),
-	KEY(6, 4, CORGI_KEY_OK),
-	KEY(6, 5, CORGI_KEY_MENU),
-	KEY(6, 6, KEY_LEFT),
-	KEY(6, 7, KEY_DOWN),
-	KEY(6, 8, KEY_RIGHT),
-	KEY(7, 0, CORGI_KEY_OFF),
-	KEY(7, 1, CORGI_KEY_EXOK),
-	KEY(7, 2, CORGI_KEY_EXCANCEL),
-	KEY(7, 3, CORGI_KEY_EXJOGDOWN),
-	KEY(7, 4, CORGI_KEY_EXJOGUP),
-};
-
-static struct matrix_keymap_data corgikbd_keymap_data = {
-	.keymap		= corgikbd_keymap,
-	.keymap_size	= ARRAY_SIZE(corgikbd_keymap),
-};
-
-static const int corgikbd_row_gpios[] =
-		{ 58, 59, 60, 61, 62, 63, 64, 65 };
-static const int corgikbd_col_gpios[] =
-		{ 66, 67, 68, 69, 70, 71, 72, 73, 74, 75, 76, 77 };
-
-static struct matrix_keypad_platform_data corgikbd_pdata = {
-	.keymap_data		= &corgikbd_keymap_data,
-	.row_gpios		= corgikbd_row_gpios,
-	.col_gpios		= corgikbd_col_gpios,
-	.num_row_gpios		= ARRAY_SIZE(corgikbd_row_gpios),
-	.num_col_gpios		= ARRAY_SIZE(corgikbd_col_gpios),
-	.col_scan_delay_us	= 10,
-	.debounce_ms		= 10,
-	.wakeup			= 1,
-};
-
-static struct platform_device corgikbd_device = {
-	.name		= "matrix-keypad",
-	.id		= -1,
-	.dev		= {
-		.platform_data = &corgikbd_pdata,
-	},
-};
-
-/*
- * Corgi LEDs
- */
-static struct gpio_led corgi_gpio_leds[] = {
-	{
-		.name			= "corgi:amber:charge",
-		.default_trigger	= "sharpsl-charge",
-		.gpio			= CORGI_GPIO_LED_ORANGE,
-	},
-	{
-		.name			= "corgi:green:mail",
-		.default_trigger	= "nand-disk",
-		.gpio			= CORGI_GPIO_LED_GREEN,
-	},
-};
-
-static struct gpio_led_platform_data corgi_gpio_leds_info = {
-	.leds		= corgi_gpio_leds,
-	.num_leds	= ARRAY_SIZE(corgi_gpio_leds),
-};
-
-static struct platform_device corgiled_device = {
-	.name		= "leds-gpio",
-	.id		= -1,
-	.dev		= {
-		.platform_data = &corgi_gpio_leds_info,
-	},
-};
-
-/*
- * Corgi Audio
- */
-static struct platform_device corgi_audio_device = {
-	.name	= "corgi-audio",
-	.id	= -1,
-};
-
-/*
- * MMC/SD Device
- *
- * The card detect interrupt isn't debounced so we delay it by 250ms
- * to give the card a chance to fully insert/eject.
- */
-static struct pxamci_platform_data corgi_mci_platform_data = {
-	.detect_delay_ms	= 250,
-	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
-	.gpio_card_detect	= CORGI_GPIO_nSD_DETECT,
-	.gpio_card_ro		= CORGI_GPIO_nSD_WP,
-	.gpio_power		= CORGI_GPIO_SD_PWR,
-};
-
-
-/*
- * Irda
- */
-static struct pxaficp_platform_data corgi_ficp_platform_data = {
-	.gpio_pwdown		= CORGI_GPIO_IR_ON,
-	.transceiver_cap	= IR_SIRMODE | IR_OFF,
-};
-
-
-/*
- * USB Device Controller
- */
-static struct pxa2xx_udc_mach_info udc_info __initdata = {
-	/* no connect GPIO; corgi can't tell connection status */
-	.gpio_pullup		= CORGI_GPIO_USB_PULLUP,
-};
-
-#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MASTER)
-static struct pxa2xx_spi_master corgi_spi_info = {
-	.num_chipselect	= 3,
-};
-
-static void corgi_wait_for_hsync(void)
-{
-	while (gpio_get_value(CORGI_GPIO_HSYNC))
-		cpu_relax();
-
-	while (!gpio_get_value(CORGI_GPIO_HSYNC))
-		cpu_relax();
-}
-
-static struct ads7846_platform_data corgi_ads7846_info = {
-	.model			= 7846,
-	.vref_delay_usecs	= 100,
-	.x_plate_ohms		= 419,
-	.y_plate_ohms		= 486,
-	.gpio_pendown		= CORGI_GPIO_TP_INT,
-	.wait_for_sync		= corgi_wait_for_hsync,
-};
-
-static struct pxa2xx_spi_chip corgi_ads7846_chip = {
-	.gpio_cs	= CORGI_GPIO_ADS7846_CS,
-};
-
-static void corgi_bl_kick_battery(void)
-{
-	void (*kick_batt)(void);
-
-	kick_batt = symbol_get(sharpsl_battery_kick);
-	if (kick_batt) {
-		kick_batt();
-		symbol_put(sharpsl_battery_kick);
-	}
-}
-
-static struct corgi_lcd_platform_data corgi_lcdcon_info = {
-	.init_mode		= CORGI_LCD_MODE_VGA,
-	.max_intensity		= 0x2f,
-	.default_intensity	= 0x1f,
-	.limit_mask		= 0x0b,
-	.gpio_backlight_cont	= CORGI_GPIO_BACKLIGHT_CONT,
-	.gpio_backlight_on	= -1,
-	.kick_battery		= corgi_bl_kick_battery,
-};
-
-static struct pxa2xx_spi_chip corgi_lcdcon_chip = {
-	.gpio_cs	= CORGI_GPIO_LCDCON_CS,
-};
-
-static struct pxa2xx_spi_chip corgi_max1111_chip = {
-	.gpio_cs	= CORGI_GPIO_MAX1111_CS,
-};
-
-static struct spi_board_info corgi_spi_devices[] = {
-	{
-		.modalias	= "ads7846",
-		.max_speed_hz	= 1200000,
-		.bus_num	= 1,
-		.chip_select	= 0,
-		.platform_data	= &corgi_ads7846_info,
-		.controller_data= &corgi_ads7846_chip,
-		.irq		= PXA_GPIO_TO_IRQ(CORGI_GPIO_TP_INT),
-	}, {
-		.modalias	= "corgi-lcd",
-		.max_speed_hz	= 50000,
-		.bus_num	= 1,
-		.chip_select	= 1,
-		.platform_data	= &corgi_lcdcon_info,
-		.controller_data= &corgi_lcdcon_chip,
-	}, {
-		.modalias	= "max1111",
-		.max_speed_hz	= 450000,
-		.bus_num	= 1,
-		.chip_select	= 2,
-		.controller_data= &corgi_max1111_chip,
-	},
-};
-
-static void __init corgi_init_spi(void)
-{
-	pxa2xx_set_spi_info(1, &corgi_spi_info);
-	spi_register_board_info(ARRAY_AND_SIZE(corgi_spi_devices));
-}
-#else
-static inline void corgi_init_spi(void) {}
-#endif
-
-static struct mtd_partition sharpsl_nand_partitions[] = {
-	{
-		.name = "System Area",
-		.offset = 0,
-		.size = 7 * 1024 * 1024,
-	},
-	{
-		.name = "Root Filesystem",
-		.offset = 7 * 1024 * 1024,
-		.size = 25 * 1024 * 1024,
-	},
-	{
-		.name = "Home Filesystem",
-		.offset = MTDPART_OFS_APPEND,
-		.size = MTDPART_SIZ_FULL,
-	},
-};
-
-static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
-
-static struct nand_bbt_descr sharpsl_bbt = {
-	.options = 0,
-	.offs = 4,
-	.len = 2,
-	.pattern = scan_ff_pattern
-};
-
-static struct sharpsl_nand_platform_data sharpsl_nand_platform_data = {
-	.badblock_pattern	= &sharpsl_bbt,
-	.partitions		= sharpsl_nand_partitions,
-	.nr_partitions		= ARRAY_SIZE(sharpsl_nand_partitions),
-};
-
-static struct resource sharpsl_nand_resources[] = {
-	{
-		.start	= 0x0C000000,
-		.end	= 0x0C000FFF,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device sharpsl_nand_device = {
-	.name		= "sharpsl-nand",
-	.id		= -1,
-	.resource	= sharpsl_nand_resources,
-	.num_resources	= ARRAY_SIZE(sharpsl_nand_resources),
-	.dev.platform_data	= &sharpsl_nand_platform_data,
-};
-
-static struct mtd_partition sharpsl_rom_parts[] = {
-	{
-		.name	="Boot PROM Filesystem",
-		.offset	= 0x00120000,
-		.size	= MTDPART_SIZ_FULL,
-	},
-};
-
-static struct physmap_flash_data sharpsl_rom_data = {
-	.width		= 2,
-	.nr_parts	= ARRAY_SIZE(sharpsl_rom_parts),
-	.parts		= sharpsl_rom_parts,
-};
-
-static struct resource sharpsl_rom_resources[] = {
-	{
-		.start	= 0x00000000,
-		.end	= 0x007fffff,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device sharpsl_rom_device = {
-	.name	= "physmap-flash",
-	.id	= -1,
-	.resource = sharpsl_rom_resources,
-	.num_resources = ARRAY_SIZE(sharpsl_rom_resources),
-	.dev.platform_data = &sharpsl_rom_data,
-};
-
-static struct platform_device *devices[] __initdata = {
-	&corgiscoop_device,
-	&corgifb_device,
-	&corgikbd_device,
-	&corgiled_device,
-	&corgi_audio_device,
-	&sharpsl_nand_device,
-	&sharpsl_rom_device,
-};
-
-static struct i2c_board_info __initdata corgi_i2c_devices[] = {
-	{ I2C_BOARD_INFO("wm8731", 0x1b) },
-};
-
-static void corgi_poweroff(void)
-{
-	if (!machine_is_corgi())
-		/* Green LED off tells the bootloader to halt */
-		gpio_set_value(CORGI_GPIO_LED_GREEN, 0);
-
-	pxa_restart('h', NULL);
-}
-
-static void corgi_restart(char mode, const char *cmd)
-{
-	if (!machine_is_corgi())
-		/* Green LED on tells the bootloader to reboot */
-		gpio_set_value(CORGI_GPIO_LED_GREEN, 1);
-
-	pxa_restart('h', cmd);
-}
-
-static void __init corgi_init(void)
-{
-	pm_power_off = corgi_poweroff;
-
-	/* Stop 3.6MHz and drive HIGH to PCMCIA and CS */
-	PCFR |= PCFR_OPDE;
-
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(corgi_pin_config));
-
-	/* allow wakeup from various GPIOs */
-	gpio_set_wake(CORGI_GPIO_KEY_INT, 1);
-	gpio_set_wake(CORGI_GPIO_WAKEUP, 1);
-	gpio_set_wake(CORGI_GPIO_AC_IN, 1);
-	gpio_set_wake(CORGI_GPIO_CHRG_FULL, 1);
-
-	if (!machine_is_corgi())
-		gpio_set_wake(CORGI_GPIO_MAIN_BAT_LOW, 1);
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	corgi_init_spi();
-
- 	pxa_set_udc_info(&udc_info);
-	pxa_set_mci_info(&corgi_mci_platform_data);
-	pxa_set_ficp_info(&corgi_ficp_platform_data);
-	pxa_set_i2c_info(NULL);
-	i2c_register_board_info(0, ARRAY_AND_SIZE(corgi_i2c_devices));
-
-	platform_scoop_config = &corgi_pcmcia_config;
-
-	if (machine_is_husky())
-		sharpsl_nand_partitions[1].size = 53 * 1024 * 1024;
-
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-}
-
-static void __init fixup_corgi(struct tag *tags, char **cmdline,
-			       struct meminfo *mi)
-{
-	sharpsl_save_param();
-	mi->nr_banks=1;
-	mi->bank[0].start = 0xa0000000;
-	if (machine_is_corgi())
-		mi->bank[0].size = (32*1024*1024);
-	else
-		mi->bank[0].size = (64*1024*1024);
-}
-
-#ifdef CONFIG_MACH_CORGI
-MACHINE_START(CORGI, "SHARP Corgi")
-	.fixup		= fixup_corgi,
-	.map_io		= pxa25x_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa25x_init_irq,
-	.handle_irq	= pxa25x_handle_irq,
-	.init_machine	= corgi_init,
-	.timer		= &pxa_timer,
-	.restart	= corgi_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_SHEPHERD
-MACHINE_START(SHEPHERD, "SHARP Shepherd")
-	.fixup		= fixup_corgi,
-	.map_io		= pxa25x_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa25x_init_irq,
-	.handle_irq	= pxa25x_handle_irq,
-	.init_machine	= corgi_init,
-	.timer		= &pxa_timer,
-	.restart	= corgi_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_HUSKY
-MACHINE_START(HUSKY, "SHARP Husky")
-	.fixup		= fixup_corgi,
-	.map_io		= pxa25x_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa25x_init_irq,
-	.handle_irq	= pxa25x_handle_irq,
-	.init_machine	= corgi_init,
-	.timer		= &pxa_timer,
-	.restart	= corgi_restart,
-MACHINE_END
-#endif
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/corgi_pm.c b/ANDROID_3.4.5/arch/arm/mach-pxa/corgi_pm.c
deleted file mode 100644
index 048c4299..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/corgi_pm.c
+++ /dev/null
@@ -1,231 +0,0 @@
-/*
- * Battery and Power Management code for the Sharp SL-C7xx
- *
- * Copyright (c) 2005 Richard Purdie
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/module.h>
-#include <linux/stat.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/gpio-pxa.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/apm-emulation.h>
-#include <linux/io.h>
-
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-#include <mach/hardware.h>
-
-#include <mach/corgi.h>
-#include <mach/pxa2xx-regs.h>
-#include <mach/sharpsl_pm.h>
-
-#include "generic.h"
-
-#define SHARPSL_CHARGE_ON_VOLT         0x99  /* 2.9V */
-#define SHARPSL_CHARGE_ON_TEMP         0xe0  /* 2.9V */
-#define SHARPSL_CHARGE_ON_ACIN_HIGH    0x9b  /* 6V */
-#define SHARPSL_CHARGE_ON_ACIN_LOW     0x34  /* 2V */
-#define SHARPSL_FATAL_ACIN_VOLT        182   /* 3.45V */
-#define SHARPSL_FATAL_NOACIN_VOLT      170   /* 3.40V */
-
-static struct gpio charger_gpios[] = {
-	{ CORGI_GPIO_ADC_TEMP_ON, GPIOF_OUT_INIT_LOW, "ADC Temp On" },
-	{ CORGI_GPIO_CHRG_ON,	  GPIOF_OUT_INIT_LOW, "Charger On" },
-	{ CORGI_GPIO_CHRG_UKN,	  GPIOF_OUT_INIT_LOW, "Charger Unknown" },
-	{ CORGI_GPIO_AC_IN,	  GPIOF_IN, "Charger Detection" },
-	{ CORGI_GPIO_KEY_INT,	  GPIOF_IN, "Key Interrupt" },
-	{ CORGI_GPIO_WAKEUP,	  GPIOF_IN, "System wakeup notification" },
-};
-
-static void corgi_charger_init(void)
-{
-	gpio_request_array(ARRAY_AND_SIZE(charger_gpios));
-}
-
-static void corgi_measure_temp(int on)
-{
-	gpio_set_value(CORGI_GPIO_ADC_TEMP_ON, on);
-}
-
-static void corgi_charge(int on)
-{
-	if (on) {
-		if (machine_is_corgi() && (sharpsl_pm.flags & SHARPSL_SUSPENDED)) {
-			gpio_set_value(CORGI_GPIO_CHRG_ON, 0);
-			gpio_set_value(CORGI_GPIO_CHRG_UKN, 1);
-		} else {
-			gpio_set_value(CORGI_GPIO_CHRG_ON, 1);
-			gpio_set_value(CORGI_GPIO_CHRG_UKN, 0);
-		}
-	} else {
-		gpio_set_value(CORGI_GPIO_CHRG_ON, 0);
-		gpio_set_value(CORGI_GPIO_CHRG_UKN, 0);
-	}
-}
-
-static void corgi_discharge(int on)
-{
-	gpio_set_value(CORGI_GPIO_DISCHARGE_ON, on);
-}
-
-static void corgi_presuspend(void)
-{
-}
-
-static void corgi_postsuspend(void)
-{
-}
-
-/*
- * Check what brought us out of the suspend.
- * Return: 0 to sleep, otherwise wake
- */
-static int corgi_should_wakeup(unsigned int resume_on_alarm)
-{
-	int is_resume = 0;
-
-	dev_dbg(sharpsl_pm.dev, "PEDR = %x, GPIO_AC_IN = %d, "
-		"GPIO_CHRG_FULL = %d, GPIO_KEY_INT = %d, GPIO_WAKEUP = %d\n",
-		PEDR, gpio_get_value(CORGI_GPIO_AC_IN),
-		gpio_get_value(CORGI_GPIO_CHRG_FULL),
-		gpio_get_value(CORGI_GPIO_KEY_INT),
-		gpio_get_value(CORGI_GPIO_WAKEUP));
-
-	if ((PEDR & GPIO_bit(CORGI_GPIO_AC_IN))) {
-		if (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN)) {
-			/* charge on */
-			dev_dbg(sharpsl_pm.dev, "ac insert\n");
-			sharpsl_pm.flags |= SHARPSL_DO_OFFLINE_CHRG;
-		} else {
-			/* charge off */
-			dev_dbg(sharpsl_pm.dev, "ac remove\n");
-			sharpsl_pm_led(SHARPSL_LED_OFF);
-			sharpsl_pm.machinfo->charge(0);
-			sharpsl_pm.charge_mode = CHRG_OFF;
-		}
-	}
-
-	if ((PEDR & GPIO_bit(CORGI_GPIO_CHRG_FULL)))
-		dev_dbg(sharpsl_pm.dev, "Charge full interrupt\n");
-
-	if (PEDR & GPIO_bit(CORGI_GPIO_KEY_INT))
-		is_resume |= GPIO_bit(CORGI_GPIO_KEY_INT);
-
-	if (PEDR & GPIO_bit(CORGI_GPIO_WAKEUP))
-		is_resume |= GPIO_bit(CORGI_GPIO_WAKEUP);
-
-	if (resume_on_alarm && (PEDR & PWER_RTC))
-		is_resume |= PWER_RTC;
-
-	dev_dbg(sharpsl_pm.dev, "is_resume: %x\n",is_resume);
-	return is_resume;
-}
-
-static unsigned long corgi_charger_wakeup(void)
-{
-	unsigned long ret;
-
-	ret = (!gpio_get_value(CORGI_GPIO_AC_IN) << GPIO_bit(CORGI_GPIO_AC_IN))
-		| (!gpio_get_value(CORGI_GPIO_KEY_INT)
-		<< GPIO_bit(CORGI_GPIO_KEY_INT))
-		| (!gpio_get_value(CORGI_GPIO_WAKEUP)
-		<< GPIO_bit(CORGI_GPIO_WAKEUP));
-	return ret;
-}
-
-unsigned long corgipm_read_devdata(int type)
-{
-	switch(type) {
-	case SHARPSL_STATUS_ACIN:
-		return !gpio_get_value(CORGI_GPIO_AC_IN);
-	case SHARPSL_STATUS_LOCK:
-		return gpio_get_value(sharpsl_pm.machinfo->gpio_batlock);
-	case SHARPSL_STATUS_CHRGFULL:
-		return gpio_get_value(sharpsl_pm.machinfo->gpio_batfull);
-	case SHARPSL_STATUS_FATAL:
-		return gpio_get_value(sharpsl_pm.machinfo->gpio_fatal);
-	case SHARPSL_ACIN_VOLT:
-		return sharpsl_pm_pxa_read_max1111(MAX1111_ACIN_VOLT);
-	case SHARPSL_BATT_TEMP:
-		return sharpsl_pm_pxa_read_max1111(MAX1111_BATT_TEMP);
-	case SHARPSL_BATT_VOLT:
-	default:
-		return sharpsl_pm_pxa_read_max1111(MAX1111_BATT_VOLT);
-	}
-}
-
-static struct sharpsl_charger_machinfo corgi_pm_machinfo = {
-	.init            = corgi_charger_init,
-	.exit            = NULL,
-	.gpio_batlock    = CORGI_GPIO_BAT_COVER,
-	.gpio_acin       = CORGI_GPIO_AC_IN,
-	.gpio_batfull    = CORGI_GPIO_CHRG_FULL,
-	.discharge       = corgi_discharge,
-	.charge          = corgi_charge,
-	.measure_temp    = corgi_measure_temp,
-	.presuspend      = corgi_presuspend,
-	.postsuspend     = corgi_postsuspend,
-	.read_devdata    = corgipm_read_devdata,
-	.charger_wakeup  = corgi_charger_wakeup,
-	.should_wakeup   = corgi_should_wakeup,
-#if defined(CONFIG_LCD_CORGI)
-	.backlight_limit = corgi_lcd_limit_intensity,
-#endif
-	.charge_on_volt	  = SHARPSL_CHARGE_ON_VOLT,
-	.charge_on_temp	  = SHARPSL_CHARGE_ON_TEMP,
-	.charge_acin_high = SHARPSL_CHARGE_ON_ACIN_HIGH,
-	.charge_acin_low  = SHARPSL_CHARGE_ON_ACIN_LOW,
-	.fatal_acin_volt  = SHARPSL_FATAL_ACIN_VOLT,
-	.fatal_noacin_volt= SHARPSL_FATAL_NOACIN_VOLT,
-	.bat_levels       = 40,
-	.bat_levels_noac  = sharpsl_battery_levels_noac,
-	.bat_levels_acin  = sharpsl_battery_levels_acin,
-	.status_high_acin = 188,
-	.status_low_acin  = 178,
-	.status_high_noac = 185,
-	.status_low_noac  = 175,
-};
-
-static struct platform_device *corgipm_device;
-
-static int __devinit corgipm_init(void)
-{
-	int ret;
-
-	if (!machine_is_corgi() && !machine_is_shepherd()
-			&& !machine_is_husky())
-		return -ENODEV;
-
-	corgipm_device = platform_device_alloc("sharpsl-pm", -1);
-	if (!corgipm_device)
-		return -ENOMEM;
-
-	if (!machine_is_corgi())
-	    corgi_pm_machinfo.batfull_irq = 1;
-
-	corgipm_device->dev.platform_data = &corgi_pm_machinfo;
-	ret = platform_device_add(corgipm_device);
-
-	if (ret)
-		platform_device_put(corgipm_device);
-
-	return ret;
-}
-
-static void corgipm_exit(void)
-{
-	platform_device_unregister(corgipm_device);
-}
-
-module_init(corgipm_init);
-module_exit(corgipm_exit);
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/cpufreq-pxa2xx.c b/ANDROID_3.4.5/arch/arm/mach-pxa/cpufreq-pxa2xx.c
deleted file mode 100644
index 6a7aeab4..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/cpufreq-pxa2xx.c
+++ /dev/null
@@ -1,494 +0,0 @@
-/*
- *  linux/arch/arm/mach-pxa/cpufreq-pxa2xx.c
- *
- *  Copyright (C) 2002,2003 Intrinsyc Software
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- * History:
- *   31-Jul-2002 : Initial version [FB]
- *   29-Jan-2003 : added PXA255 support [FB]
- *   20-Apr-2003 : ported to v2.5 (Dustin McIntire, Sensoria Corp.)
- *
- * Note:
- *   This driver may change the memory bus clock rate, but will not do any
- *   platform specific access timing changes... for example if you have flash
- *   memory connected to CS0, you will need to register a platform specific
- *   notifier which will adjust the memory access strobes to maintain a
- *   minimum strobe width.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/sched.h>
-#include <linux/init.h>
-#include <linux/cpufreq.h>
-#include <linux/err.h>
-#include <linux/regulator/consumer.h>
-#include <linux/io.h>
-
-#include <mach/pxa2xx-regs.h>
-#include <mach/smemc.h>
-
-#ifdef DEBUG
-static unsigned int freq_debug;
-module_param(freq_debug, uint, 0);
-MODULE_PARM_DESC(freq_debug, "Set the debug messages to on=1/off=0");
-#else
-#define freq_debug  0
-#endif
-
-static struct regulator *vcc_core;
-
-static unsigned int pxa27x_maxfreq;
-module_param(pxa27x_maxfreq, uint, 0);
-MODULE_PARM_DESC(pxa27x_maxfreq, "Set the pxa27x maxfreq in MHz"
-		 "(typically 624=>pxa270, 416=>pxa271, 520=>pxa272)");
-
-typedef struct {
-	unsigned int khz;
-	unsigned int membus;
-	unsigned int cccr;
-	unsigned int div2;
-	unsigned int cclkcfg;
-	int vmin;
-	int vmax;
-} pxa_freqs_t;
-
-/* Define the refresh period in mSec for the SDRAM and the number of rows */
-#define SDRAM_TREF	64	/* standard 64ms SDRAM */
-static unsigned int sdram_rows;
-
-#define CCLKCFG_TURBO		0x1
-#define CCLKCFG_FCS		0x2
-#define CCLKCFG_HALFTURBO	0x4
-#define CCLKCFG_FASTBUS		0x8
-#define MDREFR_DB2_MASK		(MDREFR_K2DB2 | MDREFR_K1DB2)
-#define MDREFR_DRI_MASK		0xFFF
-
-#define MDCNFG_DRAC2(mdcnfg) (((mdcnfg) >> 21) & 0x3)
-#define MDCNFG_DRAC0(mdcnfg) (((mdcnfg) >> 5) & 0x3)
-
-/*
- * PXA255 definitions
- */
-/* Use the run mode frequencies for the CPUFREQ_POLICY_PERFORMANCE policy */
-#define CCLKCFG			CCLKCFG_TURBO | CCLKCFG_FCS
-
-static pxa_freqs_t pxa255_run_freqs[] =
-{
-	/* CPU   MEMBUS  CCCR  DIV2 CCLKCFG	           run  turbo PXbus SDRAM */
-	{ 99500,  99500, 0x121, 1,  CCLKCFG, -1, -1},	/*  99,   99,   50,   50  */
-	{132700, 132700, 0x123, 1,  CCLKCFG, -1, -1},	/* 133,  133,   66,   66  */
-	{199100,  99500, 0x141, 0,  CCLKCFG, -1, -1},	/* 199,  199,   99,   99  */
-	{265400, 132700, 0x143, 1,  CCLKCFG, -1, -1},	/* 265,  265,  133,   66  */
-	{331800, 165900, 0x145, 1,  CCLKCFG, -1, -1},	/* 331,  331,  166,   83  */
-	{398100,  99500, 0x161, 0,  CCLKCFG, -1, -1},	/* 398,  398,  196,   99  */
-};
-
-/* Use the turbo mode frequencies for the CPUFREQ_POLICY_POWERSAVE policy */
-static pxa_freqs_t pxa255_turbo_freqs[] =
-{
-	/* CPU   MEMBUS  CCCR  DIV2 CCLKCFG	   run  turbo PXbus SDRAM */
-	{ 99500, 99500,  0x121, 1,  CCLKCFG, -1, -1},	/*  99,   99,   50,   50  */
-	{199100, 99500,  0x221, 0,  CCLKCFG, -1, -1},	/*  99,  199,   50,   99  */
-	{298500, 99500,  0x321, 0,  CCLKCFG, -1, -1},	/*  99,  287,   50,   99  */
-	{298600, 99500,  0x1c1, 0,  CCLKCFG, -1, -1},	/* 199,  287,   99,   99  */
-	{398100, 99500,  0x241, 0,  CCLKCFG, -1, -1},	/* 199,  398,   99,   99  */
-};
-
-#define NUM_PXA25x_RUN_FREQS ARRAY_SIZE(pxa255_run_freqs)
-#define NUM_PXA25x_TURBO_FREQS ARRAY_SIZE(pxa255_turbo_freqs)
-
-static struct cpufreq_frequency_table
-	pxa255_run_freq_table[NUM_PXA25x_RUN_FREQS+1];
-static struct cpufreq_frequency_table
-	pxa255_turbo_freq_table[NUM_PXA25x_TURBO_FREQS+1];
-
-static unsigned int pxa255_turbo_table;
-module_param(pxa255_turbo_table, uint, 0);
-MODULE_PARM_DESC(pxa255_turbo_table, "Selects the frequency table (0 = run table, !0 = turbo table)");
-
-/*
- * PXA270 definitions
- *
- * For the PXA27x:
- * Control variables are A, L, 2N for CCCR; B, HT, T for CLKCFG.
- *
- * A = 0 => memory controller clock from table 3-7,
- * A = 1 => memory controller clock = system bus clock
- * Run mode frequency	= 13 MHz * L
- * Turbo mode frequency = 13 MHz * L * N
- * System bus frequency = 13 MHz * L / (B + 1)
- *
- * In CCCR:
- * A = 1
- * L = 16	  oscillator to run mode ratio
- * 2N = 6	  2 * (turbo mode to run mode ratio)
- *
- * In CCLKCFG:
- * B = 1	  Fast bus mode
- * HT = 0	  Half-Turbo mode
- * T = 1	  Turbo mode
- *
- * For now, just support some of the combinations in table 3-7 of
- * PXA27x Processor Family Developer's Manual to simplify frequency
- * change sequences.
- */
-#define PXA27x_CCCR(A, L, N2) (A << 25 | N2 << 7 | L)
-#define CCLKCFG2(B, HT, T) \
-  (CCLKCFG_FCS | \
-   ((B)  ? CCLKCFG_FASTBUS : 0) | \
-   ((HT) ? CCLKCFG_HALFTURBO : 0) | \
-   ((T)  ? CCLKCFG_TURBO : 0))
-
-static pxa_freqs_t pxa27x_freqs[] = {
-	{104000, 104000, PXA27x_CCCR(1,	 8, 2), 0, CCLKCFG2(1, 0, 1),  900000, 1705000 },
-	{156000, 104000, PXA27x_CCCR(1,	 8, 3), 0, CCLKCFG2(1, 0, 1), 1000000, 1705000 },
-	{208000, 208000, PXA27x_CCCR(0, 16, 2), 1, CCLKCFG2(0, 0, 1), 1180000, 1705000 },
-	{312000, 208000, PXA27x_CCCR(1, 16, 3), 1, CCLKCFG2(1, 0, 1), 1250000, 1705000 },
-	{416000, 208000, PXA27x_CCCR(1, 16, 4), 1, CCLKCFG2(1, 0, 1), 1350000, 1705000 },
-	{520000, 208000, PXA27x_CCCR(1, 16, 5), 1, CCLKCFG2(1, 0, 1), 1450000, 1705000 },
-	{624000, 208000, PXA27x_CCCR(1, 16, 6), 1, CCLKCFG2(1, 0, 1), 1550000, 1705000 }
-};
-
-#define NUM_PXA27x_FREQS ARRAY_SIZE(pxa27x_freqs)
-static struct cpufreq_frequency_table
-	pxa27x_freq_table[NUM_PXA27x_FREQS+1];
-
-extern unsigned get_clk_frequency_khz(int info);
-
-#ifdef CONFIG_REGULATOR
-
-static int pxa_cpufreq_change_voltage(pxa_freqs_t *pxa_freq)
-{
-	int ret = 0;
-	int vmin, vmax;
-
-	if (!cpu_is_pxa27x())
-		return 0;
-
-	vmin = pxa_freq->vmin;
-	vmax = pxa_freq->vmax;
-	if ((vmin == -1) || (vmax == -1))
-		return 0;
-
-	ret = regulator_set_voltage(vcc_core, vmin, vmax);
-	if (ret)
-		pr_err("cpufreq: Failed to set vcc_core in [%dmV..%dmV]\n",
-		       vmin, vmax);
-	return ret;
-}
-
-static __init void pxa_cpufreq_init_voltages(void)
-{
-	vcc_core = regulator_get(NULL, "vcc_core");
-	if (IS_ERR(vcc_core)) {
-		pr_info("cpufreq: Didn't find vcc_core regulator\n");
-		vcc_core = NULL;
-	} else {
-		pr_info("cpufreq: Found vcc_core regulator\n");
-	}
-}
-#else
-static int pxa_cpufreq_change_voltage(pxa_freqs_t *pxa_freq)
-{
-	return 0;
-}
-
-static __init void pxa_cpufreq_init_voltages(void) { }
-#endif
-
-static void find_freq_tables(struct cpufreq_frequency_table **freq_table,
-			     pxa_freqs_t **pxa_freqs)
-{
-	if (cpu_is_pxa25x()) {
-		if (!pxa255_turbo_table) {
-			*pxa_freqs = pxa255_run_freqs;
-			*freq_table = pxa255_run_freq_table;
-		} else {
-			*pxa_freqs = pxa255_turbo_freqs;
-			*freq_table = pxa255_turbo_freq_table;
-		}
-	}
-	if (cpu_is_pxa27x()) {
-		*pxa_freqs = pxa27x_freqs;
-		*freq_table = pxa27x_freq_table;
-	}
-}
-
-static void pxa27x_guess_max_freq(void)
-{
-	if (!pxa27x_maxfreq) {
-		pxa27x_maxfreq = 416000;
-		printk(KERN_INFO "PXA CPU 27x max frequency not defined "
-		       "(pxa27x_maxfreq), assuming pxa271 with %dkHz maxfreq\n",
-		       pxa27x_maxfreq);
-	} else {
-		pxa27x_maxfreq *= 1000;
-	}
-}
-
-static void init_sdram_rows(void)
-{
-	uint32_t mdcnfg = __raw_readl(MDCNFG);
-	unsigned int drac2 = 0, drac0 = 0;
-
-	if (mdcnfg & (MDCNFG_DE2 | MDCNFG_DE3))
-		drac2 = MDCNFG_DRAC2(mdcnfg);
-
-	if (mdcnfg & (MDCNFG_DE0 | MDCNFG_DE1))
-		drac0 = MDCNFG_DRAC0(mdcnfg);
-
-	sdram_rows = 1 << (11 + max(drac0, drac2));
-}
-
-static u32 mdrefr_dri(unsigned int freq)
-{
-	u32 interval = freq * SDRAM_TREF / sdram_rows;
-
-	return (interval - (cpu_is_pxa27x() ? 31 : 0)) / 32;
-}
-
-/* find a valid frequency point */
-static int pxa_verify_policy(struct cpufreq_policy *policy)
-{
-	struct cpufreq_frequency_table *pxa_freqs_table;
-	pxa_freqs_t *pxa_freqs;
-	int ret;
-
-	find_freq_tables(&pxa_freqs_table, &pxa_freqs);
-	ret = cpufreq_frequency_table_verify(policy, pxa_freqs_table);
-
-	if (freq_debug)
-		pr_debug("Verified CPU policy: %dKhz min to %dKhz max\n",
-			 policy->min, policy->max);
-
-	return ret;
-}
-
-static unsigned int pxa_cpufreq_get(unsigned int cpu)
-{
-	return get_clk_frequency_khz(0);
-}
-
-static int pxa_set_target(struct cpufreq_policy *policy,
-			  unsigned int target_freq,
-			  unsigned int relation)
-{
-	struct cpufreq_frequency_table *pxa_freqs_table;
-	pxa_freqs_t *pxa_freq_settings;
-	struct cpufreq_freqs freqs;
-	unsigned int idx;
-	unsigned long flags;
-	unsigned int new_freq_cpu, new_freq_mem;
-	unsigned int unused, preset_mdrefr, postset_mdrefr, cclkcfg;
-	int ret = 0;
-
-	/* Get the current policy */
-	find_freq_tables(&pxa_freqs_table, &pxa_freq_settings);
-
-	/* Lookup the next frequency */
-	if (cpufreq_frequency_table_target(policy, pxa_freqs_table,
-					   target_freq, relation, &idx)) {
-		return -EINVAL;
-	}
-
-	new_freq_cpu = pxa_freq_settings[idx].khz;
-	new_freq_mem = pxa_freq_settings[idx].membus;
-	freqs.old = policy->cur;
-	freqs.new = new_freq_cpu;
-	freqs.cpu = policy->cpu;
-
-	if (freq_debug)
-		pr_debug("Changing CPU frequency to %d Mhz, (SDRAM %d Mhz)\n",
-			 freqs.new / 1000, (pxa_freq_settings[idx].div2) ?
-			 (new_freq_mem / 2000) : (new_freq_mem / 1000));
-
-	if (vcc_core && freqs.new > freqs.old)
-		ret = pxa_cpufreq_change_voltage(&pxa_freq_settings[idx]);
-	if (ret)
-		return ret;
-	/*
-	 * Tell everyone what we're about to do...
-	 * you should add a notify client with any platform specific
-	 * Vcc changing capability
-	 */
-	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
-
-	/* Calculate the next MDREFR.  If we're slowing down the SDRAM clock
-	 * we need to preset the smaller DRI before the change.	 If we're
-	 * speeding up we need to set the larger DRI value after the change.
-	 */
-	preset_mdrefr = postset_mdrefr = __raw_readl(MDREFR);
-	if ((preset_mdrefr & MDREFR_DRI_MASK) > mdrefr_dri(new_freq_mem)) {
-		preset_mdrefr = (preset_mdrefr & ~MDREFR_DRI_MASK);
-		preset_mdrefr |= mdrefr_dri(new_freq_mem);
-	}
-	postset_mdrefr =
-		(postset_mdrefr & ~MDREFR_DRI_MASK) | mdrefr_dri(new_freq_mem);
-
-	/* If we're dividing the memory clock by two for the SDRAM clock, this
-	 * must be set prior to the change.  Clearing the divide must be done
-	 * after the change.
-	 */
-	if (pxa_freq_settings[idx].div2) {
-		preset_mdrefr  |= MDREFR_DB2_MASK;
-		postset_mdrefr |= MDREFR_DB2_MASK;
-	} else {
-		postset_mdrefr &= ~MDREFR_DB2_MASK;
-	}
-
-	local_irq_save(flags);
-
-	/* Set new the CCCR and prepare CCLKCFG */
-	CCCR = pxa_freq_settings[idx].cccr;
-	cclkcfg = pxa_freq_settings[idx].cclkcfg;
-
-	asm volatile("							\n\
-		ldr	r4, [%1]		/* load MDREFR */	\n\
-		b	2f						\n\
-		.align	5						\n\
-1:									\n\
-		str	%3, [%1]		/* preset the MDREFR */	\n\
-		mcr	p14, 0, %2, c6, c0, 0	/* set CCLKCFG[FCS] */	\n\
-		str	%4, [%1]		/* postset the MDREFR */ \n\
-									\n\
-		b	3f						\n\
-2:		b	1b						\n\
-3:		nop							\n\
-	  "
-		     : "=&r" (unused)
-		     : "r" (MDREFR), "r" (cclkcfg),
-		       "r" (preset_mdrefr), "r" (postset_mdrefr)
-		     : "r4", "r5");
-	local_irq_restore(flags);
-
-	/*
-	 * Tell everyone what we've just done...
-	 * you should add a notify client with any platform specific
-	 * SDRAM refresh timer adjustments
-	 */
-	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
-
-	/*
-	 * Even if voltage setting fails, we don't report it, as the frequency
-	 * change succeeded. The voltage reduction is not a critical failure,
-	 * only power savings will suffer from this.
-	 *
-	 * Note: if the voltage change fails, and a return value is returned, a
-	 * bug is triggered (seems a deadlock). Should anybody find out where,
-	 * the "return 0" should become a "return ret".
-	 */
-	if (vcc_core && freqs.new < freqs.old)
-		ret = pxa_cpufreq_change_voltage(&pxa_freq_settings[idx]);
-
-	return 0;
-}
-
-static int pxa_cpufreq_init(struct cpufreq_policy *policy)
-{
-	int i;
-	unsigned int freq;
-	struct cpufreq_frequency_table *pxa255_freq_table;
-	pxa_freqs_t *pxa255_freqs;
-
-	/* try to guess pxa27x cpu */
-	if (cpu_is_pxa27x())
-		pxa27x_guess_max_freq();
-
-	pxa_cpufreq_init_voltages();
-
-	init_sdram_rows();
-
-	/* set default policy and cpuinfo */
-	policy->cpuinfo.transition_latency = 1000; /* FIXME: 1 ms, assumed */
-	policy->cur = get_clk_frequency_khz(0);	   /* current freq */
-	policy->min = policy->max = policy->cur;
-
-	/* Generate pxa25x the run cpufreq_frequency_table struct */
-	for (i = 0; i < NUM_PXA25x_RUN_FREQS; i++) {
-		pxa255_run_freq_table[i].frequency = pxa255_run_freqs[i].khz;
-		pxa255_run_freq_table[i].index = i;
-	}
-	pxa255_run_freq_table[i].frequency = CPUFREQ_TABLE_END;
-
-	/* Generate pxa25x the turbo cpufreq_frequency_table struct */
-	for (i = 0; i < NUM_PXA25x_TURBO_FREQS; i++) {
-		pxa255_turbo_freq_table[i].frequency =
-			pxa255_turbo_freqs[i].khz;
-		pxa255_turbo_freq_table[i].index = i;
-	}
-	pxa255_turbo_freq_table[i].frequency = CPUFREQ_TABLE_END;
-
-	pxa255_turbo_table = !!pxa255_turbo_table;
-
-	/* Generate the pxa27x cpufreq_frequency_table struct */
-	for (i = 0; i < NUM_PXA27x_FREQS; i++) {
-		freq = pxa27x_freqs[i].khz;
-		if (freq > pxa27x_maxfreq)
-			break;
-		pxa27x_freq_table[i].frequency = freq;
-		pxa27x_freq_table[i].index = i;
-	}
-	pxa27x_freq_table[i].index = i;
-	pxa27x_freq_table[i].frequency = CPUFREQ_TABLE_END;
-
-	/*
-	 * Set the policy's minimum and maximum frequencies from the tables
-	 * just constructed.  This sets cpuinfo.mxx_freq, min and max.
-	 */
-	if (cpu_is_pxa25x()) {
-		find_freq_tables(&pxa255_freq_table, &pxa255_freqs);
-		pr_info("PXA255 cpufreq using %s frequency table\n",
-			pxa255_turbo_table ? "turbo" : "run");
-		cpufreq_frequency_table_cpuinfo(policy, pxa255_freq_table);
-	}
-	else if (cpu_is_pxa27x())
-		cpufreq_frequency_table_cpuinfo(policy, pxa27x_freq_table);
-
-	printk(KERN_INFO "PXA CPU frequency change support initialized\n");
-
-	return 0;
-}
-
-static struct cpufreq_driver pxa_cpufreq_driver = {
-	.verify	= pxa_verify_policy,
-	.target	= pxa_set_target,
-	.init	= pxa_cpufreq_init,
-	.get	= pxa_cpufreq_get,
-	.name	= "PXA2xx",
-};
-
-static int __init pxa_cpu_init(void)
-{
-	int ret = -ENODEV;
-	if (cpu_is_pxa25x() || cpu_is_pxa27x())
-		ret = cpufreq_register_driver(&pxa_cpufreq_driver);
-	return ret;
-}
-
-static void __exit pxa_cpu_exit(void)
-{
-	cpufreq_unregister_driver(&pxa_cpufreq_driver);
-}
-
-
-MODULE_AUTHOR("Intrinsyc Software Inc.");
-MODULE_DESCRIPTION("CPU frequency changing driver for the PXA architecture");
-MODULE_LICENSE("GPL");
-module_init(pxa_cpu_init);
-module_exit(pxa_cpu_exit);
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/cpufreq-pxa3xx.c b/ANDROID_3.4.5/arch/arm/mach-pxa/cpufreq-pxa3xx.c
deleted file mode 100644
index b85b4ab7..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/cpufreq-pxa3xx.c
+++ /dev/null
@@ -1,258 +0,0 @@
-/*
- * linux/arch/arm/mach-pxa/cpufreq-pxa3xx.c
- *
- * Copyright (C) 2008 Marvell International Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/sched.h>
-#include <linux/init.h>
-#include <linux/cpufreq.h>
-#include <linux/slab.h>
-#include <linux/io.h>
-
-#include <mach/pxa3xx-regs.h>
-
-#include "generic.h"
-
-#define HSS_104M	(0)
-#define HSS_156M	(1)
-#define HSS_208M	(2)
-#define HSS_312M	(3)
-
-#define SMCFS_78M	(0)
-#define SMCFS_104M	(2)
-#define SMCFS_208M	(5)
-
-#define SFLFS_104M	(0)
-#define SFLFS_156M	(1)
-#define SFLFS_208M	(2)
-#define SFLFS_312M	(3)
-
-#define XSPCLK_156M	(0)
-#define XSPCLK_NONE	(3)
-
-#define DMCFS_26M	(0)
-#define DMCFS_260M	(3)
-
-struct pxa3xx_freq_info {
-	unsigned int cpufreq_mhz;
-	unsigned int core_xl : 5;
-	unsigned int core_xn : 3;
-	unsigned int hss : 2;
-	unsigned int dmcfs : 2;
-	unsigned int smcfs : 3;
-	unsigned int sflfs : 2;
-	unsigned int df_clkdiv : 3;
-
-	int	vcc_core;	/* in mV */
-	int	vcc_sram;	/* in mV */
-};
-
-#define OP(cpufreq, _xl, _xn, _hss, _dmc, _smc, _sfl, _dfi, vcore, vsram) \
-{									\
-	.cpufreq_mhz	= cpufreq,					\
-	.core_xl	= _xl,						\
-	.core_xn	= _xn,						\
-	.hss		= HSS_##_hss##M,				\
-	.dmcfs		= DMCFS_##_dmc##M,				\
-	.smcfs		= SMCFS_##_smc##M,				\
-	.sflfs		= SFLFS_##_sfl##M,				\
-	.df_clkdiv	= _dfi,						\
-	.vcc_core	= vcore,					\
-	.vcc_sram	= vsram,					\
-}
-
-static struct pxa3xx_freq_info pxa300_freqs[] = {
-	/*  CPU XL XN  HSS DMEM SMEM SRAM DFI VCC_CORE VCC_SRAM */
-	OP(104,  8, 1, 104, 260,  78, 104, 3, 1000, 1100), /* 104MHz */
-	OP(208, 16, 1, 104, 260, 104, 156, 2, 1000, 1100), /* 208MHz */
-	OP(416, 16, 2, 156, 260, 104, 208, 2, 1100, 1200), /* 416MHz */
-	OP(624, 24, 2, 208, 260, 208, 312, 3, 1375, 1400), /* 624MHz */
-};
-
-static struct pxa3xx_freq_info pxa320_freqs[] = {
-	/*  CPU XL XN  HSS DMEM SMEM SRAM DFI VCC_CORE VCC_SRAM */
-	OP(104,  8, 1, 104, 260,  78, 104, 3, 1000, 1100), /* 104MHz */
-	OP(208, 16, 1, 104, 260, 104, 156, 2, 1000, 1100), /* 208MHz */
-	OP(416, 16, 2, 156, 260, 104, 208, 2, 1100, 1200), /* 416MHz */
-	OP(624, 24, 2, 208, 260, 208, 312, 3, 1375, 1400), /* 624MHz */
-	OP(806, 31, 2, 208, 260, 208, 312, 3, 1400, 1400), /* 806MHz */
-};
-
-static unsigned int pxa3xx_freqs_num;
-static struct pxa3xx_freq_info *pxa3xx_freqs;
-static struct cpufreq_frequency_table *pxa3xx_freqs_table;
-
-static int setup_freqs_table(struct cpufreq_policy *policy,
-			     struct pxa3xx_freq_info *freqs, int num)
-{
-	struct cpufreq_frequency_table *table;
-	int i;
-
-	table = kzalloc((num + 1) * sizeof(*table), GFP_KERNEL);
-	if (table == NULL)
-		return -ENOMEM;
-
-	for (i = 0; i < num; i++) {
-		table[i].index = i;
-		table[i].frequency = freqs[i].cpufreq_mhz * 1000;
-	}
-	table[num].index = i;
-	table[num].frequency = CPUFREQ_TABLE_END;
-
-	pxa3xx_freqs = freqs;
-	pxa3xx_freqs_num = num;
-	pxa3xx_freqs_table = table;
-
-	return cpufreq_frequency_table_cpuinfo(policy, table);
-}
-
-static void __update_core_freq(struct pxa3xx_freq_info *info)
-{
-	uint32_t mask = ACCR_XN_MASK | ACCR_XL_MASK;
-	uint32_t accr = ACCR;
-	uint32_t xclkcfg;
-
-	accr &= ~(ACCR_XN_MASK | ACCR_XL_MASK | ACCR_XSPCLK_MASK);
-	accr |= ACCR_XN(info->core_xn) | ACCR_XL(info->core_xl);
-
-	/* No clock until core PLL is re-locked */
-	accr |= ACCR_XSPCLK(XSPCLK_NONE);
-
-	xclkcfg = (info->core_xn == 2) ? 0x3 : 0x2;	/* turbo bit */
-
-	ACCR = accr;
-	__asm__("mcr p14, 0, %0, c6, c0, 0\n" : : "r"(xclkcfg));
-
-	while ((ACSR & mask) != (accr & mask))
-		cpu_relax();
-}
-
-static void __update_bus_freq(struct pxa3xx_freq_info *info)
-{
-	uint32_t mask;
-	uint32_t accr = ACCR;
-
-	mask = ACCR_SMCFS_MASK | ACCR_SFLFS_MASK | ACCR_HSS_MASK |
-		ACCR_DMCFS_MASK;
-
-	accr &= ~mask;
-	accr |= ACCR_SMCFS(info->smcfs) | ACCR_SFLFS(info->sflfs) |
-		ACCR_HSS(info->hss) | ACCR_DMCFS(info->dmcfs);
-
-	ACCR = accr;
-
-	while ((ACSR & mask) != (accr & mask))
-		cpu_relax();
-}
-
-static int pxa3xx_cpufreq_verify(struct cpufreq_policy *policy)
-{
-	return cpufreq_frequency_table_verify(policy, pxa3xx_freqs_table);
-}
-
-static unsigned int pxa3xx_cpufreq_get(unsigned int cpu)
-{
-	return pxa3xx_get_clk_frequency_khz(0);
-}
-
-static int pxa3xx_cpufreq_set(struct cpufreq_policy *policy,
-			      unsigned int target_freq,
-			      unsigned int relation)
-{
-	struct pxa3xx_freq_info *next;
-	struct cpufreq_freqs freqs;
-	unsigned long flags;
-	int idx;
-
-	if (policy->cpu != 0)
-		return -EINVAL;
-
-	/* Lookup the next frequency */
-	if (cpufreq_frequency_table_target(policy, pxa3xx_freqs_table,
-				target_freq, relation, &idx))
-		return -EINVAL;
-
-	next = &pxa3xx_freqs[idx];
-
-	freqs.old = policy->cur;
-	freqs.new = next->cpufreq_mhz * 1000;
-	freqs.cpu = policy->cpu;
-
-	pr_debug("CPU frequency from %d MHz to %d MHz%s\n",
-			freqs.old / 1000, freqs.new / 1000,
-			(freqs.old == freqs.new) ? " (skipped)" : "");
-
-	if (freqs.old == target_freq)
-		return 0;
-
-	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
-
-	local_irq_save(flags);
-	__update_core_freq(next);
-	__update_bus_freq(next);
-	local_irq_restore(flags);
-
-	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
-
-	return 0;
-}
-
-static int pxa3xx_cpufreq_init(struct cpufreq_policy *policy)
-{
-	int ret = -EINVAL;
-
-	/* set default policy and cpuinfo */
-	policy->cpuinfo.min_freq = 104000;
-	policy->cpuinfo.max_freq = (cpu_is_pxa320()) ? 806000 : 624000;
-	policy->cpuinfo.transition_latency = 1000; /* FIXME: 1 ms, assumed */
-	policy->max = pxa3xx_get_clk_frequency_khz(0);
-	policy->cur = policy->min = policy->max;
-
-	if (cpu_is_pxa300() || cpu_is_pxa310())
-		ret = setup_freqs_table(policy, ARRAY_AND_SIZE(pxa300_freqs));
-
-	if (cpu_is_pxa320())
-		ret = setup_freqs_table(policy, ARRAY_AND_SIZE(pxa320_freqs));
-
-	if (ret) {
-		pr_err("failed to setup frequency table\n");
-		return ret;
-	}
-
-	pr_info("CPUFREQ support for PXA3xx initialized\n");
-	return 0;
-}
-
-static struct cpufreq_driver pxa3xx_cpufreq_driver = {
-	.verify		= pxa3xx_cpufreq_verify,
-	.target		= pxa3xx_cpufreq_set,
-	.init		= pxa3xx_cpufreq_init,
-	.get		= pxa3xx_cpufreq_get,
-	.name		= "pxa3xx-cpufreq",
-};
-
-static int __init cpufreq_init(void)
-{
-	if (cpu_is_pxa3xx())
-		return cpufreq_register_driver(&pxa3xx_cpufreq_driver);
-
-	return 0;
-}
-module_init(cpufreq_init);
-
-static void __exit cpufreq_exit(void)
-{
-	cpufreq_unregister_driver(&pxa3xx_cpufreq_driver);
-}
-module_exit(cpufreq_exit);
-
-MODULE_DESCRIPTION("CPU frequency scaling driver for PXA3xx");
-MODULE_LICENSE("GPL");
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/csb701.c b/ANDROID_3.4.5/arch/arm/mach-pxa/csb701.c
deleted file mode 100644
index 5a221a49..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/csb701.c
+++ /dev/null
@@ -1,66 +0,0 @@
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/leds.h>
-
-#include <asm/mach-types.h>
-
-static struct gpio_keys_button csb701_buttons[] = {
-	{
-		.code	= 0x7,
-		.gpio	= 1,
-		.active_low = 1,
-		.desc	= "SW2",
-		.type	= EV_SW,
-		.wakeup = 1,
-	},
-};
-
-static struct gpio_keys_platform_data csb701_gpio_keys_data = {
-	.buttons = csb701_buttons,
-	.nbuttons = ARRAY_SIZE(csb701_buttons),
-};
-
-static struct gpio_led csb701_leds[] = {
-	{
-		.name	= "csb701:yellow:heartbeat",
-		.default_trigger = "heartbeat",
-		.gpio	= 11,
-		.active_low = 1,
-	},
-};
-
-static struct platform_device csb701_gpio_keys = {
-	.name		= "gpio-keys",
-	.id		= -1,
-	.dev.platform_data = &csb701_gpio_keys_data,
-};
-
-static struct gpio_led_platform_data csb701_leds_gpio_data = {
-	.leds		= csb701_leds,
-	.num_leds	= ARRAY_SIZE(csb701_leds),
-};
-
-static struct platform_device csb701_leds_gpio = {
-	.name		= "leds-gpio",
-	.id		= -1,
-	.dev.platform_data = &csb701_leds_gpio_data,
-};
-
-static struct platform_device *devices[] __initdata = {
-	&csb701_gpio_keys,
-	&csb701_leds_gpio,
-};
-
-static int __init csb701_init(void)
-{
-	if (!machine_is_csb726())
-		return -ENODEV;
-
-	return platform_add_devices(devices, ARRAY_SIZE(devices));
-}
-
-module_init(csb701_init);
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/csb726.c b/ANDROID_3.4.5/arch/arm/mach-pxa/csb726.c
deleted file mode 100644
index 67f0de37..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/csb726.c
+++ /dev/null
@@ -1,283 +0,0 @@
-/*
- *  Support for Cogent CSB726
- *
- *  Copyright (c) 2008 Dmitry Eremin-Solenikov
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- *
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/partitions.h>
-#include <linux/sm501.h>
-#include <linux/smsc911x.h>
-#include <linux/i2c/pxa-i2c.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/csb726.h>
-#include <mach/pxa27x.h>
-#include <mach/mmc.h>
-#include <mach/ohci.h>
-#include <mach/audio.h>
-#include <mach/smemc.h>
-
-#include "generic.h"
-#include "devices.h"
-
-/*
- * n/a: 2, 5, 6, 7, 8, 23, 24, 25, 26, 27, 87, 88, 89,
- * nu: 58 -- 77, 90, 91, 93, 102, 105-108, 114-116,
- * XXX: 21,
- * XXX: 79 CS_3 for LAN9215 or PSKTSEL on R2, R3
- * XXX: 33 CS_5 for LAN9215 on R1
- */
-
-static unsigned long csb726_pin_config[] = {
-	GPIO78_nCS_2, /* EXP_CS */
-	GPIO79_nCS_3, /* SMSC9215 */
-	GPIO80_nCS_4, /* SM501 */
-
-	GPIO52_GPIO, /* #SMSC9251 int */
-	GPIO53_GPIO, /* SM501 int */
-
-	GPIO1_GPIO, /* GPIO0 */
-	GPIO11_GPIO, /* GPIO1 */
-	GPIO9_GPIO, /* GPIO2 */
-	GPIO10_GPIO, /* GPIO3 */
-	GPIO16_PWM0_OUT, /* or GPIO4 */
-	GPIO17_PWM1_OUT, /* or GPIO5 */
-	GPIO94_GPIO, /* GPIO6 */
-	GPIO95_GPIO, /* GPIO7 */
-	GPIO96_GPIO, /* GPIO8 */
-	GPIO97_GPIO, /* GPIO9 */
-	GPIO15_GPIO, /* EXP_IRQ */
-	GPIO18_RDY, /* EXP_WAIT */
-
-	GPIO0_GPIO, /* PWR_INT */
-	GPIO104_GPIO, /* PWR_OFF */
-
-	GPIO12_GPIO, /* touch irq */
-
-	GPIO13_SSP2_TXD,
-	GPIO14_SSP2_SFRM,
-	MFP_CFG_OUT(GPIO19, AF1, DRIVE_LOW),/* SSP2_SYSCLK */
-	GPIO22_SSP2_SCLK,
-
-	GPIO81_SSP3_TXD,
-	GPIO82_SSP3_RXD,
-	GPIO83_SSP3_SFRM,
-	GPIO84_SSP3_SCLK,
-
-	GPIO20_GPIO, /* SDIO int */
-	GPIO32_MMC_CLK,
-	GPIO92_MMC_DAT_0,
-	GPIO109_MMC_DAT_1,
-	GPIO110_MMC_DAT_2,
-	GPIO111_MMC_DAT_3,
-	GPIO112_MMC_CMD,
-	GPIO100_GPIO, /* SD CD */
-	GPIO101_GPIO, /* SD WP */
-
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-	GPIO113_AC97_nRESET,
-
-	GPIO34_FFUART_RXD,
-	GPIO35_FFUART_CTS,
-	GPIO36_FFUART_DCD,
-	GPIO37_FFUART_DSR,
-	GPIO38_FFUART_RI,
-	GPIO39_FFUART_TXD,
-	GPIO40_FFUART_DTR,
-	GPIO41_FFUART_RTS,
-
-	GPIO42_BTUART_RXD,
-	GPIO43_BTUART_TXD,
-	GPIO44_BTUART_CTS,
-	GPIO45_BTUART_RTS,
-
-	GPIO46_STUART_RXD,
-	GPIO47_STUART_TXD,
-
-	GPIO48_nPOE,
-	GPIO49_nPWE,
-	GPIO50_nPIOR,
-	GPIO51_nPIOW,
-	GPIO54_nPCE_2,
-	GPIO55_nPREG,
-	GPIO56_nPWAIT,
-	GPIO57_nIOIS16, /* maybe unused */
-	GPIO85_nPCE_1,
-	GPIO98_GPIO, /* CF IRQ */
-	GPIO99_GPIO, /* CF CD */
-	GPIO103_GPIO, /* Reset */
-
-	GPIO117_I2C_SCL,
-	GPIO118_I2C_SDA,
-};
-
-static struct pxamci_platform_data csb726_mci = {
-	.detect_delay_ms	= 500,
-	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
-	/* FIXME setpower */
-	.gpio_card_detect	= CSB726_GPIO_MMC_DETECT,
-	.gpio_card_ro		= CSB726_GPIO_MMC_RO,
-	.gpio_power		= -1,
-};
-
-static struct pxaohci_platform_data csb726_ohci_platform_data = {
-	.port_mode	= PMM_NPS_MODE,
-	.flags		= ENABLE_PORT1 | NO_OC_PROTECTION,
-};
-
-static struct mtd_partition csb726_flash_partitions[] = {
-	{
-		.name		= "Bootloader",
-		.offset		= 0,
-		.size		= CSB726_FLASH_uMON,
-		.mask_flags	= MTD_WRITEABLE  /* force read-only */
-	},
-	{
-		.name		= "root",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= MTDPART_SIZ_FULL,
-	}
-};
-
-static struct physmap_flash_data csb726_flash_data = {
-	.width		= 2,
-	.parts		= csb726_flash_partitions,
-	.nr_parts	= ARRAY_SIZE(csb726_flash_partitions),
-};
-
-static struct resource csb726_flash_resources[] = {
-	{
-		.start          = PXA_CS0_PHYS,
-		.end            = PXA_CS0_PHYS + CSB726_FLASH_SIZE - 1 ,
-		.flags          = IORESOURCE_MEM,
-	}
-};
-
-static struct platform_device csb726_flash = {
-	.name           = "physmap-flash",
-	.dev            = {
-		.platform_data  = &csb726_flash_data,
-	},
-	.resource       = csb726_flash_resources,
-	.num_resources  = ARRAY_SIZE(csb726_flash_resources),
-};
-
-static struct resource csb726_sm501_resources[] = {
-	{
-		.start          = PXA_CS4_PHYS,
-		.end            = PXA_CS4_PHYS + SZ_8M - 1,
-		.flags          = IORESOURCE_MEM,
-		.name		= "sm501-localmem",
-	},
-	{
-		.start          = PXA_CS4_PHYS + SZ_64M - SZ_2M,
-		.end            = PXA_CS4_PHYS + SZ_64M - 1,
-		.flags          = IORESOURCE_MEM,
-		.name		= "sm501-regs",
-	},
-	{
-		.start		= CSB726_IRQ_SM501,
-		.end		= CSB726_IRQ_SM501,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct sm501_initdata csb726_sm501_initdata = {
-/*	.devices	= SM501_USE_USB_HOST, */
-	.devices	= SM501_USE_USB_HOST | SM501_USE_UART0 | SM501_USE_UART1,
-};
-
-static struct sm501_platdata csb726_sm501_platdata = {
-	.init		= &csb726_sm501_initdata,
-};
-
-static struct platform_device csb726_sm501 = {
-	.name		= "sm501",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(csb726_sm501_resources),
-	.resource	= csb726_sm501_resources,
-	.dev		= {
-		.platform_data = &csb726_sm501_platdata,
-	},
-};
-
-static struct resource csb726_lan_resources[] = {
-	{
-		.start	= PXA_CS3_PHYS,
-		.end	= PXA_CS3_PHYS + SZ_64K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= CSB726_IRQ_LAN,
-		.end	= CSB726_IRQ_LAN,
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
-	},
-};
-
-struct smsc911x_platform_config csb726_lan_config = {
-	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
-	.irq_type	= SMSC911X_IRQ_TYPE_PUSH_PULL,
-	.flags		= SMSC911X_USE_32BIT,
-	.phy_interface	= PHY_INTERFACE_MODE_MII,
-};
-
-
-static struct platform_device csb726_lan = {
-	.name		= "smsc911x",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(csb726_lan_resources),
-	.resource	= csb726_lan_resources,
-	.dev		= {
-		.platform_data	= &csb726_lan_config,
-	},
-};
-
-static struct platform_device *devices[] __initdata = {
-	&csb726_flash,
-	&csb726_sm501,
-	&csb726_lan,
-};
-
-static void __init csb726_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(csb726_pin_config));
-/*	__raw_writel(0x7ffc3ffc, MSC1); *//* LAN9215/EXP_CS */
-/*	__raw_writel(0x06697ff4, MSC2); *//* none/SM501 */
-	__raw_writel((__raw_readl(MSC2) & ~0xffff) | 0x7ff4, MSC2); /* SM501 */
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-	pxa_set_i2c_info(NULL);
-	pxa27x_set_i2c_power_info(NULL);
-	pxa_set_mci_info(&csb726_mci);
-	pxa_set_ohci_info(&csb726_ohci_platform_data);
-	pxa_set_ac97_info(NULL);
-
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-}
-
-MACHINE_START(CSB726, "Cogent CSB726")
-	.atag_offset	= 0x100,
-	.map_io         = pxa27x_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq       = pxa27x_init_irq,
-	.handle_irq       = pxa27x_handle_irq,
-	.init_machine   = csb726_init,
-	.timer          = &pxa_timer,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/devices.c b/ANDROID_3.4.5/arch/arm/mach-pxa/devices.c
deleted file mode 100644
index 166eee5b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/devices.c
+++ /dev/null
@@ -1,1118 +0,0 @@
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-#include <linux/spi/pxa2xx_spi.h>
-#include <linux/i2c/pxa-i2c.h>
-
-#include <asm/pmu.h>
-#include <mach/udc.h>
-#include <mach/pxa3xx-u2d.h>
-#include <mach/pxafb.h>
-#include <mach/mmc.h>
-#include <mach/irda.h>
-#include <mach/irqs.h>
-#include <mach/ohci.h>
-#include <plat/pxa27x_keypad.h>
-#include <mach/camera.h>
-#include <mach/audio.h>
-#include <mach/hardware.h>
-#include <plat/pxa3xx_nand.h>
-
-#include "devices.h"
-#include "generic.h"
-
-void __init pxa_register_device(struct platform_device *dev, void *data)
-{
-	int ret;
-
-	dev->dev.platform_data = data;
-
-	ret = platform_device_register(dev);
-	if (ret)
-		dev_err(&dev->dev, "unable to register device: %d\n", ret);
-}
-
-static struct resource pxa_resource_pmu = {
-	.start	= IRQ_PMU,
-	.end	= IRQ_PMU,
-	.flags	= IORESOURCE_IRQ,
-};
-
-struct platform_device pxa_device_pmu = {
-	.name		= "arm-pmu",
-	.id		= ARM_PMU_DEVICE_CPU,
-	.resource	= &pxa_resource_pmu,
-	.num_resources	= 1,
-};
-
-static struct resource pxamci_resources[] = {
-	[0] = {
-		.start	= 0x41100000,
-		.end	= 0x41100fff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_MMC,
-		.end	= IRQ_MMC,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start	= 21,
-		.end	= 21,
-		.flags	= IORESOURCE_DMA,
-	},
-	[3] = {
-		.start	= 22,
-		.end	= 22,
-		.flags	= IORESOURCE_DMA,
-	},
-};
-
-static u64 pxamci_dmamask = 0xffffffffUL;
-
-struct platform_device pxa_device_mci = {
-	.name		= "pxa2xx-mci",
-	.id		= 0,
-	.dev		= {
-		.dma_mask = &pxamci_dmamask,
-		.coherent_dma_mask = 0xffffffff,
-	},
-	.num_resources	= ARRAY_SIZE(pxamci_resources),
-	.resource	= pxamci_resources,
-};
-
-void __init pxa_set_mci_info(struct pxamci_platform_data *info)
-{
-	pxa_register_device(&pxa_device_mci, info);
-}
-
-
-static struct pxa2xx_udc_mach_info pxa_udc_info = {
-	.gpio_pullup = -1,
-};
-
-void __init pxa_set_udc_info(struct pxa2xx_udc_mach_info *info)
-{
-	memcpy(&pxa_udc_info, info, sizeof *info);
-}
-
-static struct resource pxa2xx_udc_resources[] = {
-	[0] = {
-		.start	= 0x40600000,
-		.end	= 0x4060ffff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_USB,
-		.end	= IRQ_USB,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static u64 udc_dma_mask = ~(u32)0;
-
-struct platform_device pxa25x_device_udc = {
-	.name		= "pxa25x-udc",
-	.id		= -1,
-	.resource	= pxa2xx_udc_resources,
-	.num_resources	= ARRAY_SIZE(pxa2xx_udc_resources),
-	.dev		=  {
-		.platform_data	= &pxa_udc_info,
-		.dma_mask	= &udc_dma_mask,
-	}
-};
-
-struct platform_device pxa27x_device_udc = {
-	.name		= "pxa27x-udc",
-	.id		= -1,
-	.resource	= pxa2xx_udc_resources,
-	.num_resources	= ARRAY_SIZE(pxa2xx_udc_resources),
-	.dev		=  {
-		.platform_data	= &pxa_udc_info,
-		.dma_mask	= &udc_dma_mask,
-	}
-};
-
-#ifdef CONFIG_PXA3xx
-static struct resource pxa3xx_u2d_resources[] = {
-	[0] = {
-		.start	= 0x54100000,
-		.end	= 0x54100fff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_USB2,
-		.end	= IRQ_USB2,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device pxa3xx_device_u2d = {
-	.name		= "pxa3xx-u2d",
-	.id		= -1,
-	.resource	= pxa3xx_u2d_resources,
-	.num_resources	= ARRAY_SIZE(pxa3xx_u2d_resources),
-};
-
-void __init pxa3xx_set_u2d_info(struct pxa3xx_u2d_platform_data *info)
-{
-	pxa_register_device(&pxa3xx_device_u2d, info);
-}
-#endif /* CONFIG_PXA3xx */
-
-static struct resource pxafb_resources[] = {
-	[0] = {
-		.start	= 0x44000000,
-		.end	= 0x4400ffff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_LCD,
-		.end	= IRQ_LCD,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static u64 fb_dma_mask = ~(u64)0;
-
-struct platform_device pxa_device_fb = {
-	.name		= "pxa2xx-fb",
-	.id		= -1,
-	.dev		= {
-		.dma_mask	= &fb_dma_mask,
-		.coherent_dma_mask = 0xffffffff,
-	},
-	.num_resources	= ARRAY_SIZE(pxafb_resources),
-	.resource	= pxafb_resources,
-};
-
-void __init pxa_set_fb_info(struct device *parent, struct pxafb_mach_info *info)
-{
-	pxa_device_fb.dev.parent = parent;
-	pxa_register_device(&pxa_device_fb, info);
-}
-
-static struct resource pxa_resource_ffuart[] = {
-	{
-		.start	= 0x40100000,
-		.end	= 0x40100023,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= IRQ_FFUART,
-		.end	= IRQ_FFUART,
-		.flags	= IORESOURCE_IRQ,
-	}
-};
-
-struct platform_device pxa_device_ffuart = {
-	.name		= "pxa2xx-uart",
-	.id		= 0,
-	.resource	= pxa_resource_ffuart,
-	.num_resources	= ARRAY_SIZE(pxa_resource_ffuart),
-};
-
-void __init pxa_set_ffuart_info(void *info)
-{
-	pxa_register_device(&pxa_device_ffuart, info);
-}
-
-static struct resource pxa_resource_btuart[] = {
-	{
-		.start	= 0x40200000,
-		.end	= 0x40200023,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= IRQ_BTUART,
-		.end	= IRQ_BTUART,
-		.flags	= IORESOURCE_IRQ,
-	}
-};
-
-struct platform_device pxa_device_btuart = {
-	.name		= "pxa2xx-uart",
-	.id		= 1,
-	.resource	= pxa_resource_btuart,
-	.num_resources	= ARRAY_SIZE(pxa_resource_btuart),
-};
-
-void __init pxa_set_btuart_info(void *info)
-{
-	pxa_register_device(&pxa_device_btuart, info);
-}
-
-static struct resource pxa_resource_stuart[] = {
-	{
-		.start	= 0x40700000,
-		.end	= 0x40700023,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= IRQ_STUART,
-		.end	= IRQ_STUART,
-		.flags	= IORESOURCE_IRQ,
-	}
-};
-
-struct platform_device pxa_device_stuart = {
-	.name		= "pxa2xx-uart",
-	.id		= 2,
-	.resource	= pxa_resource_stuart,
-	.num_resources	= ARRAY_SIZE(pxa_resource_stuart),
-};
-
-void __init pxa_set_stuart_info(void *info)
-{
-	pxa_register_device(&pxa_device_stuart, info);
-}
-
-static struct resource pxa_resource_hwuart[] = {
-	{
-		.start	= 0x41600000,
-		.end	= 0x4160002F,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= IRQ_HWUART,
-		.end	= IRQ_HWUART,
-		.flags	= IORESOURCE_IRQ,
-	}
-};
-
-struct platform_device pxa_device_hwuart = {
-	.name		= "pxa2xx-uart",
-	.id		= 3,
-	.resource	= pxa_resource_hwuart,
-	.num_resources	= ARRAY_SIZE(pxa_resource_hwuart),
-};
-
-void __init pxa_set_hwuart_info(void *info)
-{
-	if (cpu_is_pxa255())
-		pxa_register_device(&pxa_device_hwuart, info);
-	else
-		pr_info("UART: Ignoring attempt to register HWUART on non-PXA255 hardware");
-}
-
-static struct resource pxai2c_resources[] = {
-	{
-		.start	= 0x40301680,
-		.end	= 0x403016a3,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= IRQ_I2C,
-		.end	= IRQ_I2C,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device pxa_device_i2c = {
-	.name		= "pxa2xx-i2c",
-	.id		= 0,
-	.resource	= pxai2c_resources,
-	.num_resources	= ARRAY_SIZE(pxai2c_resources),
-};
-
-void __init pxa_set_i2c_info(struct i2c_pxa_platform_data *info)
-{
-	pxa_register_device(&pxa_device_i2c, info);
-}
-
-#ifdef CONFIG_PXA27x
-static struct resource pxa27x_resources_i2c_power[] = {
-	{
-		.start	= 0x40f00180,
-		.end	= 0x40f001a3,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= IRQ_PWRI2C,
-		.end	= IRQ_PWRI2C,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device pxa27x_device_i2c_power = {
-	.name		= "pxa2xx-i2c",
-	.id		= 1,
-	.resource	= pxa27x_resources_i2c_power,
-	.num_resources	= ARRAY_SIZE(pxa27x_resources_i2c_power),
-};
-#endif
-
-static struct resource pxai2s_resources[] = {
-	{
-		.start	= 0x40400000,
-		.end	= 0x40400083,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= IRQ_I2S,
-		.end	= IRQ_I2S,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device pxa_device_i2s = {
-	.name		= "pxa2xx-i2s",
-	.id		= -1,
-	.resource	= pxai2s_resources,
-	.num_resources	= ARRAY_SIZE(pxai2s_resources),
-};
-
-struct platform_device pxa_device_asoc_ssp1 = {
-	.name		= "pxa-ssp-dai",
-	.id		= 0,
-};
-
-struct platform_device pxa_device_asoc_ssp2= {
-	.name		= "pxa-ssp-dai",
-	.id		= 1,
-};
-
-struct platform_device pxa_device_asoc_ssp3 = {
-	.name		= "pxa-ssp-dai",
-	.id		= 2,
-};
-
-struct platform_device pxa_device_asoc_ssp4 = {
-	.name		= "pxa-ssp-dai",
-	.id		= 3,
-};
-
-struct platform_device pxa_device_asoc_platform = {
-	.name		= "pxa-pcm-audio",
-	.id		= -1,
-};
-
-static u64 pxaficp_dmamask = ~(u32)0;
-
-struct platform_device pxa_device_ficp = {
-	.name		= "pxa2xx-ir",
-	.id		= -1,
-	.dev		= {
-		.dma_mask = &pxaficp_dmamask,
-		.coherent_dma_mask = 0xffffffff,
-	},
-};
-
-void __init pxa_set_ficp_info(struct pxaficp_platform_data *info)
-{
-	pxa_register_device(&pxa_device_ficp, info);
-}
-
-static struct resource pxa_rtc_resources[] = {
-	[0] = {
-		.start  = 0x40900000,
-		.end	= 0x40900000 + 0x3b,
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = IRQ_RTC1Hz,
-		.end    = IRQ_RTC1Hz,
-		.name	= "rtc 1Hz",
-		.flags  = IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start  = IRQ_RTCAlrm,
-		.end    = IRQ_RTCAlrm,
-		.name	= "rtc alarm",
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device pxa_device_rtc = {
-	.name		= "pxa-rtc",
-	.id		= -1,
-	.num_resources  = ARRAY_SIZE(pxa_rtc_resources),
-	.resource       = pxa_rtc_resources,
-};
-
-static struct resource sa1100_rtc_resources[] = {
-	{
-		.start  = IRQ_RTC1Hz,
-		.end    = IRQ_RTC1Hz,
-		.name	= "rtc 1Hz",
-		.flags  = IORESOURCE_IRQ,
-	}, {
-		.start  = IRQ_RTCAlrm,
-		.end    = IRQ_RTCAlrm,
-		.name	= "rtc alarm",
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device sa1100_device_rtc = {
-	.name		= "sa1100-rtc",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(sa1100_rtc_resources),
-	.resource	= sa1100_rtc_resources,
-};
-
-static struct resource pxa_ac97_resources[] = {
-	[0] = {
-		.start  = 0x40500000,
-		.end	= 0x40500000 + 0xfff,
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = IRQ_AC97,
-		.end    = IRQ_AC97,
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static u64 pxa_ac97_dmamask = 0xffffffffUL;
-
-struct platform_device pxa_device_ac97 = {
-	.name           = "pxa2xx-ac97",
-	.id             = -1,
-	.dev            = {
-		.dma_mask = &pxa_ac97_dmamask,
-		.coherent_dma_mask = 0xffffffff,
-	},
-	.num_resources  = ARRAY_SIZE(pxa_ac97_resources),
-	.resource       = pxa_ac97_resources,
-};
-
-void __init pxa_set_ac97_info(pxa2xx_audio_ops_t *ops)
-{
-	pxa_register_device(&pxa_device_ac97, ops);
-}
-
-#ifdef CONFIG_PXA25x
-
-static struct resource pxa25x_resource_pwm0[] = {
-	[0] = {
-		.start	= 0x40b00000,
-		.end	= 0x40b0000f,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-struct platform_device pxa25x_device_pwm0 = {
-	.name		= "pxa25x-pwm",
-	.id		= 0,
-	.resource	= pxa25x_resource_pwm0,
-	.num_resources	= ARRAY_SIZE(pxa25x_resource_pwm0),
-};
-
-static struct resource pxa25x_resource_pwm1[] = {
-	[0] = {
-		.start	= 0x40c00000,
-		.end	= 0x40c0000f,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-struct platform_device pxa25x_device_pwm1 = {
-	.name		= "pxa25x-pwm",
-	.id		= 1,
-	.resource	= pxa25x_resource_pwm1,
-	.num_resources	= ARRAY_SIZE(pxa25x_resource_pwm1),
-};
-
-static u64 pxa25x_ssp_dma_mask = DMA_BIT_MASK(32);
-
-static struct resource pxa25x_resource_ssp[] = {
-	[0] = {
-		.start	= 0x41000000,
-		.end	= 0x4100001f,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_SSP,
-		.end	= IRQ_SSP,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		/* DRCMR for RX */
-		.start	= 13,
-		.end	= 13,
-		.flags	= IORESOURCE_DMA,
-	},
-	[3] = {
-		/* DRCMR for TX */
-		.start	= 14,
-		.end	= 14,
-		.flags	= IORESOURCE_DMA,
-	},
-};
-
-struct platform_device pxa25x_device_ssp = {
-	.name		= "pxa25x-ssp",
-	.id		= 0,
-	.dev		= {
-		.dma_mask = &pxa25x_ssp_dma_mask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-	.resource	= pxa25x_resource_ssp,
-	.num_resources	= ARRAY_SIZE(pxa25x_resource_ssp),
-};
-
-static u64 pxa25x_nssp_dma_mask = DMA_BIT_MASK(32);
-
-static struct resource pxa25x_resource_nssp[] = {
-	[0] = {
-		.start	= 0x41400000,
-		.end	= 0x4140002f,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_NSSP,
-		.end	= IRQ_NSSP,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		/* DRCMR for RX */
-		.start	= 15,
-		.end	= 15,
-		.flags	= IORESOURCE_DMA,
-	},
-	[3] = {
-		/* DRCMR for TX */
-		.start	= 16,
-		.end	= 16,
-		.flags	= IORESOURCE_DMA,
-	},
-};
-
-struct platform_device pxa25x_device_nssp = {
-	.name		= "pxa25x-nssp",
-	.id		= 1,
-	.dev		= {
-		.dma_mask = &pxa25x_nssp_dma_mask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-	.resource	= pxa25x_resource_nssp,
-	.num_resources	= ARRAY_SIZE(pxa25x_resource_nssp),
-};
-
-static u64 pxa25x_assp_dma_mask = DMA_BIT_MASK(32);
-
-static struct resource pxa25x_resource_assp[] = {
-	[0] = {
-		.start	= 0x41500000,
-		.end	= 0x4150002f,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_ASSP,
-		.end	= IRQ_ASSP,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		/* DRCMR for RX */
-		.start	= 23,
-		.end	= 23,
-		.flags	= IORESOURCE_DMA,
-	},
-	[3] = {
-		/* DRCMR for TX */
-		.start	= 24,
-		.end	= 24,
-		.flags	= IORESOURCE_DMA,
-	},
-};
-
-struct platform_device pxa25x_device_assp = {
-	/* ASSP is basically equivalent to NSSP */
-	.name		= "pxa25x-nssp",
-	.id		= 2,
-	.dev		= {
-		.dma_mask = &pxa25x_assp_dma_mask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-	.resource	= pxa25x_resource_assp,
-	.num_resources	= ARRAY_SIZE(pxa25x_resource_assp),
-};
-#endif /* CONFIG_PXA25x */
-
-#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
-static struct resource pxa27x_resource_camera[] = {
-	[0] = {
-		.start	= 0x50000000,
-		.end	= 0x50000fff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_CAMERA,
-		.end	= IRQ_CAMERA,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static u64 pxa27x_dma_mask_camera = DMA_BIT_MASK(32);
-
-static struct platform_device pxa27x_device_camera = {
-	.name		= "pxa27x-camera",
-	.id		= 0, /* This is used to put cameras on this interface */
-	.dev		= {
-		.dma_mask      		= &pxa27x_dma_mask_camera,
-		.coherent_dma_mask	= 0xffffffff,
-	},
-	.num_resources	= ARRAY_SIZE(pxa27x_resource_camera),
-	.resource	= pxa27x_resource_camera,
-};
-
-void __init pxa_set_camera_info(struct pxacamera_platform_data *info)
-{
-	pxa_register_device(&pxa27x_device_camera, info);
-}
-
-static u64 pxa27x_ohci_dma_mask = DMA_BIT_MASK(32);
-
-static struct resource pxa27x_resource_ohci[] = {
-	[0] = {
-		.start  = 0x4C000000,
-		.end    = 0x4C00ff6f,
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = IRQ_USBH1,
-		.end    = IRQ_USBH1,
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device pxa27x_device_ohci = {
-	.name		= "pxa27x-ohci",
-	.id		= -1,
-	.dev		= {
-		.dma_mask = &pxa27x_ohci_dma_mask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-	.num_resources  = ARRAY_SIZE(pxa27x_resource_ohci),
-	.resource       = pxa27x_resource_ohci,
-};
-
-void __init pxa_set_ohci_info(struct pxaohci_platform_data *info)
-{
-	pxa_register_device(&pxa27x_device_ohci, info);
-}
-#endif /* CONFIG_PXA27x || CONFIG_PXA3xx */
-
-#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) || defined(CONFIG_PXA95x)
-static struct resource pxa27x_resource_keypad[] = {
-	[0] = {
-		.start	= 0x41500000,
-		.end	= 0x4150004c,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_KEYPAD,
-		.end	= IRQ_KEYPAD,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device pxa27x_device_keypad = {
-	.name		= "pxa27x-keypad",
-	.id		= -1,
-	.resource	= pxa27x_resource_keypad,
-	.num_resources	= ARRAY_SIZE(pxa27x_resource_keypad),
-};
-
-void __init pxa_set_keypad_info(struct pxa27x_keypad_platform_data *info)
-{
-	pxa_register_device(&pxa27x_device_keypad, info);
-}
-
-static u64 pxa27x_ssp1_dma_mask = DMA_BIT_MASK(32);
-
-static struct resource pxa27x_resource_ssp1[] = {
-	[0] = {
-		.start	= 0x41000000,
-		.end	= 0x4100003f,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_SSP,
-		.end	= IRQ_SSP,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		/* DRCMR for RX */
-		.start	= 13,
-		.end	= 13,
-		.flags	= IORESOURCE_DMA,
-	},
-	[3] = {
-		/* DRCMR for TX */
-		.start	= 14,
-		.end	= 14,
-		.flags	= IORESOURCE_DMA,
-	},
-};
-
-struct platform_device pxa27x_device_ssp1 = {
-	.name		= "pxa27x-ssp",
-	.id		= 0,
-	.dev		= {
-		.dma_mask = &pxa27x_ssp1_dma_mask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-	.resource	= pxa27x_resource_ssp1,
-	.num_resources	= ARRAY_SIZE(pxa27x_resource_ssp1),
-};
-
-static u64 pxa27x_ssp2_dma_mask = DMA_BIT_MASK(32);
-
-static struct resource pxa27x_resource_ssp2[] = {
-	[0] = {
-		.start	= 0x41700000,
-		.end	= 0x4170003f,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_SSP2,
-		.end	= IRQ_SSP2,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		/* DRCMR for RX */
-		.start	= 15,
-		.end	= 15,
-		.flags	= IORESOURCE_DMA,
-	},
-	[3] = {
-		/* DRCMR for TX */
-		.start	= 16,
-		.end	= 16,
-		.flags	= IORESOURCE_DMA,
-	},
-};
-
-struct platform_device pxa27x_device_ssp2 = {
-	.name		= "pxa27x-ssp",
-	.id		= 1,
-	.dev		= {
-		.dma_mask = &pxa27x_ssp2_dma_mask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-	.resource	= pxa27x_resource_ssp2,
-	.num_resources	= ARRAY_SIZE(pxa27x_resource_ssp2),
-};
-
-static u64 pxa27x_ssp3_dma_mask = DMA_BIT_MASK(32);
-
-static struct resource pxa27x_resource_ssp3[] = {
-	[0] = {
-		.start	= 0x41900000,
-		.end	= 0x4190003f,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_SSP3,
-		.end	= IRQ_SSP3,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		/* DRCMR for RX */
-		.start	= 66,
-		.end	= 66,
-		.flags	= IORESOURCE_DMA,
-	},
-	[3] = {
-		/* DRCMR for TX */
-		.start	= 67,
-		.end	= 67,
-		.flags	= IORESOURCE_DMA,
-	},
-};
-
-struct platform_device pxa27x_device_ssp3 = {
-	.name		= "pxa27x-ssp",
-	.id		= 2,
-	.dev		= {
-		.dma_mask = &pxa27x_ssp3_dma_mask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-	.resource	= pxa27x_resource_ssp3,
-	.num_resources	= ARRAY_SIZE(pxa27x_resource_ssp3),
-};
-
-static struct resource pxa27x_resource_pwm0[] = {
-	[0] = {
-		.start	= 0x40b00000,
-		.end	= 0x40b0001f,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-struct platform_device pxa27x_device_pwm0 = {
-	.name		= "pxa27x-pwm",
-	.id		= 0,
-	.resource	= pxa27x_resource_pwm0,
-	.num_resources	= ARRAY_SIZE(pxa27x_resource_pwm0),
-};
-
-static struct resource pxa27x_resource_pwm1[] = {
-	[0] = {
-		.start	= 0x40c00000,
-		.end	= 0x40c0001f,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-struct platform_device pxa27x_device_pwm1 = {
-	.name		= "pxa27x-pwm",
-	.id		= 1,
-	.resource	= pxa27x_resource_pwm1,
-	.num_resources	= ARRAY_SIZE(pxa27x_resource_pwm1),
-};
-#endif /* CONFIG_PXA27x || CONFIG_PXA3xx || CONFIG_PXA95x*/
-
-#ifdef CONFIG_PXA3xx
-static struct resource pxa3xx_resources_mci2[] = {
-	[0] = {
-		.start	= 0x42000000,
-		.end	= 0x42000fff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_MMC2,
-		.end	= IRQ_MMC2,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start	= 93,
-		.end	= 93,
-		.flags	= IORESOURCE_DMA,
-	},
-	[3] = {
-		.start	= 94,
-		.end	= 94,
-		.flags	= IORESOURCE_DMA,
-	},
-};
-
-struct platform_device pxa3xx_device_mci2 = {
-	.name		= "pxa2xx-mci",
-	.id		= 1,
-	.dev		= {
-		.dma_mask = &pxamci_dmamask,
-		.coherent_dma_mask =	0xffffffff,
-	},
-	.num_resources	= ARRAY_SIZE(pxa3xx_resources_mci2),
-	.resource	= pxa3xx_resources_mci2,
-};
-
-void __init pxa3xx_set_mci2_info(struct pxamci_platform_data *info)
-{
-	pxa_register_device(&pxa3xx_device_mci2, info);
-}
-
-static struct resource pxa3xx_resources_mci3[] = {
-	[0] = {
-		.start	= 0x42500000,
-		.end	= 0x42500fff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_MMC3,
-		.end	= IRQ_MMC3,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start	= 100,
-		.end	= 100,
-		.flags	= IORESOURCE_DMA,
-	},
-	[3] = {
-		.start	= 101,
-		.end	= 101,
-		.flags	= IORESOURCE_DMA,
-	},
-};
-
-struct platform_device pxa3xx_device_mci3 = {
-	.name		= "pxa2xx-mci",
-	.id		= 2,
-	.dev		= {
-		.dma_mask = &pxamci_dmamask,
-		.coherent_dma_mask = 0xffffffff,
-	},
-	.num_resources	= ARRAY_SIZE(pxa3xx_resources_mci3),
-	.resource	= pxa3xx_resources_mci3,
-};
-
-void __init pxa3xx_set_mci3_info(struct pxamci_platform_data *info)
-{
-	pxa_register_device(&pxa3xx_device_mci3, info);
-}
-
-static struct resource pxa3xx_resources_gcu[] = {
-	{
-		.start	= 0x54000000,
-		.end	= 0x54000fff,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= IRQ_GCU,
-		.end	= IRQ_GCU,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static u64 pxa3xx_gcu_dmamask = DMA_BIT_MASK(32);
-
-struct platform_device pxa3xx_device_gcu = {
-	.name		= "pxa3xx-gcu",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(pxa3xx_resources_gcu),
-	.resource	= pxa3xx_resources_gcu,
-	.dev		= {
-		.dma_mask = &pxa3xx_gcu_dmamask,
-		.coherent_dma_mask = 0xffffffff,
-	},
-};
-
-#endif /* CONFIG_PXA3xx */
-
-#if defined(CONFIG_PXA3xx) || defined(CONFIG_PXA95x)
-static struct resource pxa3xx_resources_i2c_power[] = {
-	{
-		.start  = 0x40f500c0,
-		.end    = 0x40f500d3,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= IRQ_PWRI2C,
-		.end	= IRQ_PWRI2C,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device pxa3xx_device_i2c_power = {
-	.name		= "pxa3xx-pwri2c",
-	.id		= 1,
-	.resource	= pxa3xx_resources_i2c_power,
-	.num_resources	= ARRAY_SIZE(pxa3xx_resources_i2c_power),
-};
-
-static struct resource pxa3xx_resources_nand[] = {
-	[0] = {
-		.start	= 0x43100000,
-		.end	= 0x43100053,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_NAND,
-		.end	= IRQ_NAND,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		/* DRCMR for Data DMA */
-		.start	= 97,
-		.end	= 97,
-		.flags	= IORESOURCE_DMA,
-	},
-	[3] = {
-		/* DRCMR for Command DMA */
-		.start	= 99,
-		.end	= 99,
-		.flags	= IORESOURCE_DMA,
-	},
-};
-
-static u64 pxa3xx_nand_dma_mask = DMA_BIT_MASK(32);
-
-struct platform_device pxa3xx_device_nand = {
-	.name		= "pxa3xx-nand",
-	.id		= -1,
-	.dev		= {
-		.dma_mask = &pxa3xx_nand_dma_mask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-	.num_resources	= ARRAY_SIZE(pxa3xx_resources_nand),
-	.resource	= pxa3xx_resources_nand,
-};
-
-void __init pxa3xx_set_nand_info(struct pxa3xx_nand_platform_data *info)
-{
-	pxa_register_device(&pxa3xx_device_nand, info);
-}
-
-static u64 pxa3xx_ssp4_dma_mask = DMA_BIT_MASK(32);
-
-static struct resource pxa3xx_resource_ssp4[] = {
-	[0] = {
-		.start	= 0x41a00000,
-		.end	= 0x41a0003f,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_SSP4,
-		.end	= IRQ_SSP4,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		/* DRCMR for RX */
-		.start	= 2,
-		.end	= 2,
-		.flags	= IORESOURCE_DMA,
-	},
-	[3] = {
-		/* DRCMR for TX */
-		.start	= 3,
-		.end	= 3,
-		.flags	= IORESOURCE_DMA,
-	},
-};
-
-struct platform_device pxa3xx_device_ssp4 = {
-	/* PXA3xx SSP is basically equivalent to PXA27x */
-	.name		= "pxa27x-ssp",
-	.id		= 3,
-	.dev		= {
-		.dma_mask = &pxa3xx_ssp4_dma_mask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-	.resource	= pxa3xx_resource_ssp4,
-	.num_resources	= ARRAY_SIZE(pxa3xx_resource_ssp4),
-};
-#endif /* CONFIG_PXA3xx || CONFIG_PXA95x */
-
-struct resource pxa_resource_gpio[] = {
-	{
-		.start	= 0x40e00000,
-		.end	= 0x40e0ffff,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= IRQ_GPIO0,
-		.end	= IRQ_GPIO0,
-		.name	= "gpio0",
-		.flags	= IORESOURCE_IRQ,
-	}, {
-		.start	= IRQ_GPIO1,
-		.end	= IRQ_GPIO1,
-		.name	= "gpio1",
-		.flags	= IORESOURCE_IRQ,
-	}, {
-		.start	= IRQ_GPIO_2_x,
-		.end	= IRQ_GPIO_2_x,
-		.name	= "gpio_mux",
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device pxa_device_gpio = {
-	.name		= "pxa-gpio",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(pxa_resource_gpio),
-	.resource	= pxa_resource_gpio,
-};
-
-/* pxa2xx-spi platform-device ID equals respective SSP platform-device ID + 1.
- * See comment in arch/arm/mach-pxa/ssp.c::ssp_probe() */
-void __init pxa2xx_set_spi_info(unsigned id, struct pxa2xx_spi_master *info)
-{
-	struct platform_device *pd;
-
-	pd = platform_device_alloc("pxa2xx-spi", id);
-	if (pd == NULL) {
-		printk(KERN_ERR "pxa2xx-spi: failed to allocate device id %d\n",
-		       id);
-		return;
-	}
-
-	pd->dev.platform_data = info;
-	platform_device_add(pd);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/devices.h b/ANDROID_3.4.5/arch/arm/mach-pxa/devices.h
deleted file mode 100644
index 1475db10..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/devices.h
+++ /dev/null
@@ -1,49 +0,0 @@
-extern struct platform_device pxa_device_pmu;
-extern struct platform_device pxa_device_mci;
-extern struct platform_device pxa3xx_device_mci2;
-extern struct platform_device pxa3xx_device_mci3;
-extern struct platform_device pxa25x_device_udc;
-extern struct platform_device pxa27x_device_udc;
-extern struct platform_device pxa3xx_device_u2d;
-extern struct platform_device pxa_device_fb;
-extern struct platform_device pxa_device_ffuart;
-extern struct platform_device pxa_device_btuart;
-extern struct platform_device pxa_device_stuart;
-extern struct platform_device pxa_device_hwuart;
-extern struct platform_device pxa_device_i2c;
-extern struct platform_device pxa_device_i2s;
-extern struct platform_device pxa_device_ficp;
-extern struct platform_device sa1100_device_rtc;
-extern struct platform_device pxa_device_rtc;
-extern struct platform_device pxa_device_ac97;
-extern struct platform_device pxa_device_gpio;
-
-extern struct platform_device pxa27x_device_i2c_power;
-extern struct platform_device pxa27x_device_ohci;
-extern struct platform_device pxa27x_device_keypad;
-
-extern struct platform_device pxa25x_device_ssp;
-extern struct platform_device pxa25x_device_nssp;
-extern struct platform_device pxa25x_device_assp;
-extern struct platform_device pxa27x_device_ssp1;
-extern struct platform_device pxa27x_device_ssp2;
-extern struct platform_device pxa27x_device_ssp3;
-extern struct platform_device pxa3xx_device_ssp4;
-
-extern struct platform_device pxa25x_device_pwm0;
-extern struct platform_device pxa25x_device_pwm1;
-extern struct platform_device pxa27x_device_pwm0;
-extern struct platform_device pxa27x_device_pwm1;
-
-extern struct platform_device pxa3xx_device_nand;
-extern struct platform_device pxa3xx_device_i2c_power;
-
-extern struct platform_device pxa3xx_device_gcu;
-
-extern struct platform_device pxa_device_asoc_platform;
-extern struct platform_device pxa_device_asoc_ssp1;
-extern struct platform_device pxa_device_asoc_ssp2;
-extern struct platform_device pxa_device_asoc_ssp3;
-extern struct platform_device pxa_device_asoc_ssp4;
-
-void __init pxa_register_device(struct platform_device *dev, void *data);
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/em-x270.c b/ANDROID_3.4.5/arch/arm/mach-pxa/em-x270.c
deleted file mode 100644
index 16ec557b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/em-x270.c
+++ /dev/null
@@ -1,1321 +0,0 @@
-/*
- * Support for CompuLab EM-X270 platform
- *
- * Copyright (C) 2007, 2008 CompuLab, Ltd.
- * Author: Mike Rapoport <mike@compulab.co.il>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/irq.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-
-#include <linux/dm9000.h>
-#include <linux/rtc-v3020.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/input.h>
-#include <linux/gpio_keys.h>
-#include <linux/gpio.h>
-#include <linux/mfd/da903x.h>
-#include <linux/regulator/machine.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/tdo24m.h>
-#include <linux/spi/libertas_spi.h>
-#include <linux/spi/pxa2xx_spi.h>
-#include <linux/power_supply.h>
-#include <linux/apm-emulation.h>
-#include <linux/i2c.h>
-#include <linux/i2c/pca953x.h>
-#include <linux/i2c/pxa-i2c.h>
-#include <linux/regulator/userspace-consumer.h>
-
-#include <media/soc_camera.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include <mach/pxa27x.h>
-#include <mach/pxa27x-udc.h>
-#include <mach/audio.h>
-#include <mach/pxafb.h>
-#include <mach/ohci.h>
-#include <mach/mmc.h>
-#include <plat/pxa27x_keypad.h>
-#include <mach/camera.h>
-
-#include "generic.h"
-#include "devices.h"
-
-/* EM-X270 specific GPIOs */
-#define GPIO13_MMC_CD		(13)
-#define GPIO95_MMC_WP		(95)
-#define GPIO56_NAND_RB		(56)
-#define GPIO93_CAM_RESET	(93)
-#define GPIO16_USB_HUB_RESET	(16)
-
-/* eXeda specific GPIOs */
-#define GPIO114_MMC_CD		(114)
-#define GPIO20_NAND_RB		(20)
-#define GPIO38_SD_PWEN		(38)
-#define GPIO37_WLAN_RST		(37)
-#define GPIO95_TOUCHPAD_INT	(95)
-#define GPIO130_CAM_RESET	(130)
-#define GPIO10_USB_HUB_RESET	(10)
-
-/* common  GPIOs */
-#define GPIO11_NAND_CS		(11)
-#define GPIO41_ETHIRQ		(41)
-#define EM_X270_ETHIRQ		PXA_GPIO_TO_IRQ(GPIO41_ETHIRQ)
-#define GPIO115_WLAN_PWEN	(115)
-#define GPIO19_WLAN_STRAP	(19)
-#define GPIO9_USB_VBUS_EN	(9)
-
-static int mmc_cd;
-static int nand_rb;
-static int dm9000_flags;
-static int cam_reset;
-static int usb_hub_reset;
-
-static unsigned long common_pin_config[] = {
-	/* AC'97 */
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-	GPIO98_AC97_SYSCLK,
-	GPIO113_AC97_nRESET,
-
-	/* BTUART */
-	GPIO42_BTUART_RXD,
-	GPIO43_BTUART_TXD,
-	GPIO44_BTUART_CTS,
-	GPIO45_BTUART_RTS,
-
-	/* STUART */
-	GPIO46_STUART_RXD,
-	GPIO47_STUART_TXD,
-
-	/* MCI controller */
-	GPIO32_MMC_CLK,
-	GPIO112_MMC_CMD,
-	GPIO92_MMC_DAT_0,
-	GPIO109_MMC_DAT_1,
-	GPIO110_MMC_DAT_2,
-	GPIO111_MMC_DAT_3,
-
-	/* LCD */
-	GPIOxx_LCD_TFT_16BPP,
-
-	/* QCI */
-	GPIO84_CIF_FV,
-	GPIO25_CIF_LV,
-	GPIO53_CIF_MCLK,
-	GPIO54_CIF_PCLK,
-	GPIO81_CIF_DD_0,
-	GPIO55_CIF_DD_1,
-	GPIO51_CIF_DD_2,
-	GPIO50_CIF_DD_3,
-	GPIO52_CIF_DD_4,
-	GPIO48_CIF_DD_5,
-	GPIO17_CIF_DD_6,
-	GPIO12_CIF_DD_7,
-
-	/* I2C */
-	GPIO117_I2C_SCL,
-	GPIO118_I2C_SDA,
-
-	/* Keypad */
-	GPIO100_KP_MKIN_0	| WAKEUP_ON_LEVEL_HIGH,
-	GPIO101_KP_MKIN_1	| WAKEUP_ON_LEVEL_HIGH,
-	GPIO102_KP_MKIN_2	| WAKEUP_ON_LEVEL_HIGH,
-	GPIO34_KP_MKIN_3	| WAKEUP_ON_LEVEL_HIGH,
-	GPIO39_KP_MKIN_4	| WAKEUP_ON_LEVEL_HIGH,
-	GPIO99_KP_MKIN_5	| WAKEUP_ON_LEVEL_HIGH,
-	GPIO91_KP_MKIN_6	| WAKEUP_ON_LEVEL_HIGH,
-	GPIO36_KP_MKIN_7	| WAKEUP_ON_LEVEL_HIGH,
-	GPIO103_KP_MKOUT_0,
-	GPIO104_KP_MKOUT_1,
-	GPIO105_KP_MKOUT_2,
-	GPIO106_KP_MKOUT_3,
-	GPIO107_KP_MKOUT_4,
-	GPIO108_KP_MKOUT_5,
-	GPIO96_KP_MKOUT_6,
-	GPIO22_KP_MKOUT_7,
-
-	/* SSP1 */
-	GPIO26_SSP1_RXD,
-	GPIO23_SSP1_SCLK,
-	GPIO24_SSP1_SFRM,
-	GPIO57_SSP1_TXD,
-
-	/* SSP2 */
-	GPIO19_GPIO,	/* SSP2 clock is used as GPIO for Libertas pin-strap */
-	GPIO14_GPIO,
-	GPIO89_SSP2_TXD,
-	GPIO88_SSP2_RXD,
-
-	/* SDRAM and local bus */
-	GPIO15_nCS_1,
-	GPIO78_nCS_2,
-	GPIO79_nCS_3,
-	GPIO80_nCS_4,
-	GPIO49_nPWE,
-	GPIO18_RDY,
-
-	/* GPIO */
-	GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,	/* sleep/resume button */
-
-	/* power controls */
-	GPIO20_GPIO	| MFP_LPM_DRIVE_LOW,	/* GPRS_PWEN */
-	GPIO115_GPIO	| MFP_LPM_DRIVE_LOW,	/* WLAN_PWEN */
-
-	/* NAND controls */
-	GPIO11_GPIO	| MFP_LPM_DRIVE_HIGH,	/* NAND CE# */
-
-	/* interrupts */
-	GPIO41_GPIO,	/* DM9000 interrupt */
-};
-
-static unsigned long em_x270_pin_config[] = {
-	GPIO13_GPIO,				/* MMC card detect */
-	GPIO16_GPIO,				/* USB hub reset */
-	GPIO56_GPIO,				/* NAND Ready/Busy */
-	GPIO93_GPIO	| MFP_LPM_DRIVE_LOW,	/* Camera reset */
-	GPIO95_GPIO,				/* MMC Write protect */
-};
-
-static unsigned long exeda_pin_config[] = {
-	GPIO10_GPIO,				/* USB hub reset */
-	GPIO20_GPIO,				/* NAND Ready/Busy */
-	GPIO38_GPIO	| MFP_LPM_DRIVE_LOW,	/* SD slot power */
-	GPIO95_GPIO,				/* touchpad IRQ */
-	GPIO114_GPIO,				/* MMC card detect */
-};
-
-#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
-static struct resource em_x270_dm9000_resource[] = {
-	[0] = {
-		.start = PXA_CS2_PHYS,
-		.end   = PXA_CS2_PHYS + 3,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = PXA_CS2_PHYS + 8,
-		.end   = PXA_CS2_PHYS + 8 + 0x3f,
-		.flags = IORESOURCE_MEM,
-	},
-	[2] = {
-		.start = EM_X270_ETHIRQ,
-		.end   = EM_X270_ETHIRQ,
-		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	}
-};
-
-static struct dm9000_plat_data em_x270_dm9000_platdata = {
-	.flags		= DM9000_PLATF_NO_EEPROM,
-};
-
-static struct platform_device em_x270_dm9000 = {
-	.name		= "dm9000",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(em_x270_dm9000_resource),
-	.resource	= em_x270_dm9000_resource,
-	.dev		= {
-		.platform_data = &em_x270_dm9000_platdata,
-	}
-};
-
-static void __init em_x270_init_dm9000(void)
-{
-	em_x270_dm9000_platdata.flags |= dm9000_flags;
-	platform_device_register(&em_x270_dm9000);
-}
-#else
-static inline void em_x270_init_dm9000(void) {}
-#endif
-
-/* V3020 RTC */
-#if defined(CONFIG_RTC_DRV_V3020) || defined(CONFIG_RTC_DRV_V3020_MODULE)
-static struct resource em_x270_v3020_resource[] = {
-	[0] = {
-		.start = PXA_CS4_PHYS,
-		.end   = PXA_CS4_PHYS + 3,
-		.flags = IORESOURCE_MEM,
-	},
-};
-
-static struct v3020_platform_data em_x270_v3020_platdata = {
-	.leftshift = 0,
-};
-
-static struct platform_device em_x270_rtc = {
-	.name		= "v3020",
-	.num_resources	= ARRAY_SIZE(em_x270_v3020_resource),
-	.resource	= em_x270_v3020_resource,
-	.id		= -1,
-	.dev		= {
-		.platform_data = &em_x270_v3020_platdata,
-	}
-};
-
-static void __init em_x270_init_rtc(void)
-{
-	platform_device_register(&em_x270_rtc);
-}
-#else
-static inline void em_x270_init_rtc(void) {}
-#endif
-
-/* NAND flash */
-#if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
-static inline void nand_cs_on(void)
-{
-	gpio_set_value(GPIO11_NAND_CS, 0);
-}
-
-static void nand_cs_off(void)
-{
-	dsb();
-
-	gpio_set_value(GPIO11_NAND_CS, 1);
-}
-
-/* hardware specific access to control-lines */
-static void em_x270_nand_cmd_ctl(struct mtd_info *mtd, int dat,
-				 unsigned int ctrl)
-{
-	struct nand_chip *this = mtd->priv;
-	unsigned long nandaddr = (unsigned long)this->IO_ADDR_W;
-
-	dsb();
-
-	if (ctrl & NAND_CTRL_CHANGE) {
-		if (ctrl & NAND_ALE)
-			nandaddr |=  (1 << 3);
-		else
-			nandaddr &= ~(1 << 3);
-		if (ctrl & NAND_CLE)
-			nandaddr |=  (1 << 2);
-		else
-			nandaddr &= ~(1 << 2);
-		if (ctrl & NAND_NCE)
-			nand_cs_on();
-		else
-			nand_cs_off();
-	}
-
-	dsb();
-	this->IO_ADDR_W = (void __iomem *)nandaddr;
-	if (dat != NAND_CMD_NONE)
-		writel(dat, this->IO_ADDR_W);
-
-	dsb();
-}
-
-/* read device ready pin */
-static int em_x270_nand_device_ready(struct mtd_info *mtd)
-{
-	dsb();
-
-	return gpio_get_value(nand_rb);
-}
-
-static struct mtd_partition em_x270_partition_info[] = {
-	[0] = {
-		.name	= "em_x270-0",
-		.offset	= 0,
-		.size	= SZ_4M,
-	},
-	[1] = {
-		.name	= "em_x270-1",
-		.offset	= MTDPART_OFS_APPEND,
-		.size	= MTDPART_SIZ_FULL
-	},
-};
-
-static const char *em_x270_part_probes[] = { "cmdlinepart", NULL };
-
-struct platform_nand_data em_x270_nand_platdata = {
-	.chip = {
-		.nr_chips = 1,
-		.chip_offset = 0,
-		.nr_partitions = ARRAY_SIZE(em_x270_partition_info),
-		.partitions = em_x270_partition_info,
-		.chip_delay = 20,
-		.part_probe_types = em_x270_part_probes,
-	},
-	.ctrl = {
-		.hwcontrol = 0,
-		.dev_ready = em_x270_nand_device_ready,
-		.select_chip = 0,
-		.cmd_ctrl = em_x270_nand_cmd_ctl,
-	},
-};
-
-static struct resource em_x270_nand_resource[] = {
-	[0] = {
-		.start = PXA_CS1_PHYS,
-		.end   = PXA_CS1_PHYS + 12,
-		.flags = IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device em_x270_nand = {
-	.name		= "gen_nand",
-	.num_resources	= ARRAY_SIZE(em_x270_nand_resource),
-	.resource	= em_x270_nand_resource,
-	.id		= -1,
-	.dev		= {
-		.platform_data = &em_x270_nand_platdata,
-	}
-};
-
-static void __init em_x270_init_nand(void)
-{
-	int err;
-
-	err = gpio_request(GPIO11_NAND_CS, "NAND CS");
-	if (err) {
-		pr_warning("EM-X270: failed to request NAND CS gpio\n");
-		return;
-	}
-
-	gpio_direction_output(GPIO11_NAND_CS, 1);
-
-	err = gpio_request(nand_rb, "NAND R/B");
-	if (err) {
-		pr_warning("EM-X270: failed to request NAND R/B gpio\n");
-		gpio_free(GPIO11_NAND_CS);
-		return;
-	}
-
-	gpio_direction_input(nand_rb);
-
-	platform_device_register(&em_x270_nand);
-}
-#else
-static inline void em_x270_init_nand(void) {}
-#endif
-
-#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
-static struct mtd_partition em_x270_nor_parts[] = {
-	{
-		.name =		"Bootloader",
-		.offset =	0x00000000,
-		.size =		0x00050000,
-		.mask_flags =	MTD_WRITEABLE  /* force read-only */
-	}, {
-		.name =		"Environment",
-		.offset =	0x00050000,
-		.size =		0x00010000,
-	}, {
-		.name =		"Reserved",
-		.offset =	0x00060000,
-		.size =		0x00050000,
-		.mask_flags =	MTD_WRITEABLE  /* force read-only */
-	}, {
-		.name =		"Splashscreen",
-		.offset =	0x000b0000,
-		.size =		0x00050000,
-	}
-};
-
-static struct physmap_flash_data em_x270_nor_data[] = {
-	[0] = {
-		.width = 2,
-		.parts = em_x270_nor_parts,
-		.nr_parts = ARRAY_SIZE(em_x270_nor_parts),
-	},
-};
-
-static struct resource em_x270_nor_flash_resource = {
-	.start	= PXA_CS0_PHYS,
-	.end	= PXA_CS0_PHYS + SZ_1M - 1,
-	.flags	= IORESOURCE_MEM,
-};
-
-static struct platform_device em_x270_physmap_flash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.num_resources	= 1,
-	.resource	= &em_x270_nor_flash_resource,
-	.dev		= {
-		.platform_data	= &em_x270_nor_data,
-	},
-};
-
-static void __init em_x270_init_nor(void)
-{
-	platform_device_register(&em_x270_physmap_flash);
-}
-#else
-static inline void em_x270_init_nor(void) {}
-#endif
-
-/* PXA27x OHCI controller setup */
-#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-static struct regulator *em_x270_usb_ldo;
-
-static int em_x270_usb_hub_init(void)
-{
-	int err;
-
-	em_x270_usb_ldo = regulator_get(NULL, "vcc usb");
-	if (IS_ERR(em_x270_usb_ldo))
-		return PTR_ERR(em_x270_usb_ldo);
-
-	err = gpio_request(GPIO9_USB_VBUS_EN, "vbus en");
-	if (err)
-		goto err_free_usb_ldo;
-
-	err = gpio_request(usb_hub_reset, "hub rst");
-	if (err)
-		goto err_free_vbus_gpio;
-
-	/* USB Hub power-on and reset */
-	gpio_direction_output(usb_hub_reset, 1);
-	gpio_direction_output(GPIO9_USB_VBUS_EN, 0);
-	regulator_enable(em_x270_usb_ldo);
-	gpio_set_value(usb_hub_reset, 0);
-	gpio_set_value(usb_hub_reset, 1);
-	regulator_disable(em_x270_usb_ldo);
-	regulator_enable(em_x270_usb_ldo);
-	gpio_set_value(usb_hub_reset, 0);
-	gpio_set_value(GPIO9_USB_VBUS_EN, 1);
-
-	return 0;
-
-err_free_vbus_gpio:
-	gpio_free(GPIO9_USB_VBUS_EN);
-err_free_usb_ldo:
-	regulator_put(em_x270_usb_ldo);
-
-	return err;
-}
-
-static int em_x270_ohci_init(struct device *dev)
-{
-	int err;
-
-	/* we don't want to entirely disable USB if the HUB init failed */
-	err = em_x270_usb_hub_init();
-	if (err)
-		pr_err("USB Hub initialization failed: %d\n", err);
-
-	/* enable port 2 transiever */
-	UP2OCR = UP2OCR_HXS | UP2OCR_HXOE;
-
-	return 0;
-}
-
-static void em_x270_ohci_exit(struct device *dev)
-{
-	gpio_free(usb_hub_reset);
-	gpio_free(GPIO9_USB_VBUS_EN);
-
-	if (!IS_ERR(em_x270_usb_ldo)) {
-		if (regulator_is_enabled(em_x270_usb_ldo))
-			regulator_disable(em_x270_usb_ldo);
-
-		regulator_put(em_x270_usb_ldo);
-	}
-}
-
-static struct pxaohci_platform_data em_x270_ohci_platform_data = {
-	.port_mode	= PMM_PERPORT_MODE,
-	.flags		= ENABLE_PORT1 | ENABLE_PORT2 | POWER_CONTROL_LOW,
-	.init		= em_x270_ohci_init,
-	.exit		= em_x270_ohci_exit,
-};
-
-static void __init em_x270_init_ohci(void)
-{
-	pxa_set_ohci_info(&em_x270_ohci_platform_data);
-}
-#else
-static inline void em_x270_init_ohci(void) {}
-#endif
-
-/* MCI controller setup */
-#if defined(CONFIG_MMC) || defined(CONFIG_MMC_MODULE)
-static struct regulator *em_x270_sdio_ldo;
-
-static int em_x270_mci_init(struct device *dev,
-			    irq_handler_t em_x270_detect_int,
-			    void *data)
-{
-	int err;
-
-	em_x270_sdio_ldo = regulator_get(dev, "vcc sdio");
-	if (IS_ERR(em_x270_sdio_ldo)) {
-		dev_err(dev, "can't request SDIO power supply: %ld\n",
-			PTR_ERR(em_x270_sdio_ldo));
-		return PTR_ERR(em_x270_sdio_ldo);
-	}
-
-	err = request_irq(gpio_to_irq(mmc_cd), em_x270_detect_int,
-			      IRQF_DISABLED | IRQF_TRIGGER_RISING |
-			      IRQF_TRIGGER_FALLING,
-			      "MMC card detect", data);
-	if (err) {
-		dev_err(dev, "can't request MMC card detect IRQ: %d\n", err);
-		goto err_irq;
-	}
-
-	if (machine_is_em_x270()) {
-		err = gpio_request(GPIO95_MMC_WP, "MMC WP");
-		if (err) {
-			dev_err(dev, "can't request MMC write protect: %d\n",
-				err);
-			goto err_gpio_wp;
-		}
-		gpio_direction_input(GPIO95_MMC_WP);
-	} else {
-		err = gpio_request(GPIO38_SD_PWEN, "sdio power");
-		if (err) {
-			dev_err(dev, "can't request MMC power control : %d\n",
-				err);
-			goto err_gpio_wp;
-		}
-		gpio_direction_output(GPIO38_SD_PWEN, 1);
-	}
-
-	return 0;
-
-err_gpio_wp:
-	free_irq(gpio_to_irq(mmc_cd), data);
-err_irq:
-	regulator_put(em_x270_sdio_ldo);
-
-	return err;
-}
-
-static void em_x270_mci_setpower(struct device *dev, unsigned int vdd)
-{
-	struct pxamci_platform_data* p_d = dev->platform_data;
-
-	if ((1 << vdd) & p_d->ocr_mask) {
-		int vdd_uV = (2000 + (vdd - __ffs(MMC_VDD_20_21)) * 100) * 1000;
-
-		regulator_set_voltage(em_x270_sdio_ldo, vdd_uV, vdd_uV);
-		regulator_enable(em_x270_sdio_ldo);
-	} else {
-		regulator_disable(em_x270_sdio_ldo);
-	}
-}
-
-static void em_x270_mci_exit(struct device *dev, void *data)
-{
-	free_irq(gpio_to_irq(mmc_cd), data);
-	regulator_put(em_x270_sdio_ldo);
-
-	if (machine_is_em_x270())
-		gpio_free(GPIO95_MMC_WP);
-	else
-		gpio_free(GPIO38_SD_PWEN);
-}
-
-static int em_x270_mci_get_ro(struct device *dev)
-{
-	return gpio_get_value(GPIO95_MMC_WP);
-}
-
-static struct pxamci_platform_data em_x270_mci_platform_data = {
-	.detect_delay_ms	= 250,
-	.ocr_mask		= MMC_VDD_20_21|MMC_VDD_21_22|MMC_VDD_22_23|
-				  MMC_VDD_24_25|MMC_VDD_25_26|MMC_VDD_26_27|
-				  MMC_VDD_27_28|MMC_VDD_28_29|MMC_VDD_29_30|
-				  MMC_VDD_30_31|MMC_VDD_31_32,
-	.init 			= em_x270_mci_init,
-	.setpower 		= em_x270_mci_setpower,
-	.exit			= em_x270_mci_exit,
-	.gpio_card_detect	= -1,
-	.gpio_card_ro		= -1,
-	.gpio_power		= -1,
-};
-
-static void __init em_x270_init_mmc(void)
-{
-	if (machine_is_em_x270())
-		em_x270_mci_platform_data.get_ro = em_x270_mci_get_ro;
-
-	pxa_set_mci_info(&em_x270_mci_platform_data);
-}
-#else
-static inline void em_x270_init_mmc(void) {}
-#endif
-
-/* LCD */
-#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
-static struct pxafb_mode_info em_x270_lcd_modes[] = {
-	[0] = {
-		.pixclock	= 38250,
-		.bpp		= 16,
-		.xres		= 480,
-		.yres		= 640,
-		.hsync_len	= 8,
-		.vsync_len	= 2,
-		.left_margin	= 8,
-		.upper_margin	= 2,
-		.right_margin	= 24,
-		.lower_margin	= 4,
-		.sync		= 0,
-	},
-	[1] = {
-		.pixclock       = 153800,
-		.bpp		= 16,
-		.xres		= 240,
-		.yres		= 320,
-		.hsync_len	= 8,
-		.vsync_len	= 2,
-		.left_margin	= 8,
-		.upper_margin	= 2,
-		.right_margin	= 88,
-		.lower_margin	= 2,
-		.sync		= 0,
-	},
-};
-
-static struct pxafb_mach_info em_x270_lcd = {
-	.modes		= em_x270_lcd_modes,
-	.num_modes	= 2,
-	.lcd_conn	= LCD_COLOR_TFT_16BPP,
-};
-
-static void __init em_x270_init_lcd(void)
-{
-	pxa_set_fb_info(NULL, &em_x270_lcd);
-}
-#else
-static inline void em_x270_init_lcd(void) {}
-#endif
-
-#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE)
-static struct pxa2xx_spi_master em_x270_spi_info = {
-	.num_chipselect	= 1,
-};
-
-static struct pxa2xx_spi_chip em_x270_tdo24m_chip = {
-	.rx_threshold	= 1,
-	.tx_threshold	= 1,
-	.gpio_cs	= -1,
-};
-
-static struct tdo24m_platform_data em_x270_tdo24m_pdata = {
-	.model = TDO35S,
-};
-
-static struct pxa2xx_spi_master em_x270_spi_2_info = {
-	.num_chipselect	= 1,
-	.enable_dma	= 1,
-};
-
-static struct pxa2xx_spi_chip em_x270_libertas_chip = {
-	.rx_threshold	= 1,
-	.tx_threshold	= 1,
-	.timeout	= 1000,
-	.gpio_cs	= 14,
-};
-
-static unsigned long em_x270_libertas_pin_config[] = {
-	/* SSP2 */
-	GPIO19_SSP2_SCLK,
-	GPIO14_GPIO,
-	GPIO89_SSP2_TXD,
-	GPIO88_SSP2_RXD,
-};
-
-static int em_x270_libertas_setup(struct spi_device *spi)
-{
-	int err = gpio_request(GPIO115_WLAN_PWEN, "WLAN PWEN");
-	if (err)
-		return err;
-
-	err = gpio_request(GPIO19_WLAN_STRAP, "WLAN STRAP");
-	if (err)
-		goto err_free_pwen;
-
-	if (machine_is_exeda()) {
-		err = gpio_request(GPIO37_WLAN_RST, "WLAN RST");
-		if (err)
-			goto err_free_strap;
-
-		gpio_direction_output(GPIO37_WLAN_RST, 1);
-		msleep(100);
-	}
-
-	gpio_direction_output(GPIO19_WLAN_STRAP, 1);
-	msleep(100);
-
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(em_x270_libertas_pin_config));
-
-	gpio_direction_output(GPIO115_WLAN_PWEN, 0);
-	msleep(100);
-	gpio_set_value(GPIO115_WLAN_PWEN, 1);
-	msleep(100);
-
-	spi->bits_per_word = 16;
-	spi_setup(spi);
-
-	return 0;
-
-err_free_strap:
-	gpio_free(GPIO19_WLAN_STRAP);
-err_free_pwen:
-	gpio_free(GPIO115_WLAN_PWEN);
-
-	return err;
-}
-
-static int em_x270_libertas_teardown(struct spi_device *spi)
-{
-	gpio_set_value(GPIO115_WLAN_PWEN, 0);
-	gpio_free(GPIO115_WLAN_PWEN);
-	gpio_free(GPIO19_WLAN_STRAP);
-
-	if (machine_is_exeda()) {
-		gpio_set_value(GPIO37_WLAN_RST, 0);
-		gpio_free(GPIO37_WLAN_RST);
-	}
-
-	return 0;
-}
-
-struct libertas_spi_platform_data em_x270_libertas_pdata = {
-	.use_dummy_writes	= 1,
-	.setup			= em_x270_libertas_setup,
-	.teardown		= em_x270_libertas_teardown,
-};
-
-static struct spi_board_info em_x270_spi_devices[] __initdata = {
-	{
-		.modalias		= "tdo24m",
-		.max_speed_hz		= 1000000,
-		.bus_num		= 1,
-		.chip_select		= 0,
-		.controller_data	= &em_x270_tdo24m_chip,
-		.platform_data		= &em_x270_tdo24m_pdata,
-	},
-	{
-		.modalias		= "libertas_spi",
-		.max_speed_hz		= 13000000,
-		.bus_num		= 2,
-		.irq			= PXA_GPIO_TO_IRQ(116),
-		.chip_select		= 0,
-		.controller_data	= &em_x270_libertas_chip,
-		.platform_data		= &em_x270_libertas_pdata,
-	},
-};
-
-static void __init em_x270_init_spi(void)
-{
-	pxa2xx_set_spi_info(1, &em_x270_spi_info);
-	pxa2xx_set_spi_info(2, &em_x270_spi_2_info);
-	spi_register_board_info(ARRAY_AND_SIZE(em_x270_spi_devices));
-}
-#else
-static inline void em_x270_init_spi(void) {}
-#endif
-
-#if defined(CONFIG_SND_PXA2XX_LIB_AC97)
-static pxa2xx_audio_ops_t em_x270_ac97_info = {
-	.reset_gpio = 113,
-};
-
-static void __init em_x270_init_ac97(void)
-{
-	pxa_set_ac97_info(&em_x270_ac97_info);
-}
-#else
-static inline void em_x270_init_ac97(void) {}
-#endif
-
-#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
-static unsigned int em_x270_module_matrix_keys[] = {
-	KEY(0, 0, KEY_A), KEY(1, 0, KEY_UP), KEY(2, 1, KEY_B),
-	KEY(0, 2, KEY_LEFT), KEY(1, 1, KEY_ENTER), KEY(2, 0, KEY_RIGHT),
-	KEY(0, 1, KEY_C), KEY(1, 2, KEY_DOWN), KEY(2, 2, KEY_D),
-};
-
-struct pxa27x_keypad_platform_data em_x270_module_keypad_info = {
-	/* code map for the matrix keys */
-	.matrix_key_rows	= 3,
-	.matrix_key_cols	= 3,
-	.matrix_key_map		= em_x270_module_matrix_keys,
-	.matrix_key_map_size	= ARRAY_SIZE(em_x270_module_matrix_keys),
-};
-
-static unsigned int em_x270_exeda_matrix_keys[] = {
-	KEY(0, 0, KEY_RIGHTSHIFT), KEY(0, 1, KEY_RIGHTCTRL),
-	KEY(0, 2, KEY_RIGHTALT), KEY(0, 3, KEY_SPACE),
-	KEY(0, 4, KEY_LEFTALT), KEY(0, 5, KEY_LEFTCTRL),
-	KEY(0, 6, KEY_ENTER), KEY(0, 7, KEY_SLASH),
-
-	KEY(1, 0, KEY_DOT), KEY(1, 1, KEY_M),
-	KEY(1, 2, KEY_N), KEY(1, 3, KEY_B),
-	KEY(1, 4, KEY_V), KEY(1, 5, KEY_C),
-	KEY(1, 6, KEY_X), KEY(1, 7, KEY_Z),
-
-	KEY(2, 0, KEY_LEFTSHIFT), KEY(2, 1, KEY_SEMICOLON),
-	KEY(2, 2, KEY_L), KEY(2, 3, KEY_K),
-	KEY(2, 4, KEY_J), KEY(2, 5, KEY_H),
-	KEY(2, 6, KEY_G), KEY(2, 7, KEY_F),
-
-	KEY(3, 0, KEY_D), KEY(3, 1, KEY_S),
-	KEY(3, 2, KEY_A), KEY(3, 3, KEY_TAB),
-	KEY(3, 4, KEY_BACKSPACE), KEY(3, 5, KEY_P),
-	KEY(3, 6, KEY_O), KEY(3, 7, KEY_I),
-
-	KEY(4, 0, KEY_U), KEY(4, 1, KEY_Y),
-	KEY(4, 2, KEY_T), KEY(4, 3, KEY_R),
-	KEY(4, 4, KEY_E), KEY(4, 5, KEY_W),
-	KEY(4, 6, KEY_Q), KEY(4, 7, KEY_MINUS),
-
-	KEY(5, 0, KEY_0), KEY(5, 1, KEY_9),
-	KEY(5, 2, KEY_8), KEY(5, 3, KEY_7),
-	KEY(5, 4, KEY_6), KEY(5, 5, KEY_5),
-	KEY(5, 6, KEY_4), KEY(5, 7, KEY_3),
-
-	KEY(6, 0, KEY_2), KEY(6, 1, KEY_1),
-	KEY(6, 2, KEY_ENTER), KEY(6, 3, KEY_END),
-	KEY(6, 4, KEY_DOWN), KEY(6, 5, KEY_UP),
-	KEY(6, 6, KEY_MENU), KEY(6, 7, KEY_F1),
-
-	KEY(7, 0, KEY_LEFT), KEY(7, 1, KEY_RIGHT),
-	KEY(7, 2, KEY_BACK), KEY(7, 3, KEY_HOME),
-	KEY(7, 4, 0), KEY(7, 5, 0),
-	KEY(7, 6, 0), KEY(7, 7, 0),
-};
-
-struct pxa27x_keypad_platform_data em_x270_exeda_keypad_info = {
-	/* code map for the matrix keys */
-	.matrix_key_rows	= 8,
-	.matrix_key_cols	= 8,
-	.matrix_key_map		= em_x270_exeda_matrix_keys,
-	.matrix_key_map_size	= ARRAY_SIZE(em_x270_exeda_matrix_keys),
-};
-
-static void __init em_x270_init_keypad(void)
-{
-	if (machine_is_em_x270())
-		pxa_set_keypad_info(&em_x270_module_keypad_info);
-	else
-		pxa_set_keypad_info(&em_x270_exeda_keypad_info);
-}
-#else
-static inline void em_x270_init_keypad(void) {}
-#endif
-
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-static struct gpio_keys_button gpio_keys_button[] = {
-	[0] = {
-		.desc	= "sleep/wakeup",
-		.code	= KEY_SUSPEND,
-		.type	= EV_PWR,
-		.gpio	= 1,
-		.wakeup	= 1,
-	},
-};
-
-static struct gpio_keys_platform_data em_x270_gpio_keys_data = {
-	.buttons	= gpio_keys_button,
-	.nbuttons	= 1,
-};
-
-static struct platform_device em_x270_gpio_keys = {
-	.name		= "gpio-keys",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &em_x270_gpio_keys_data,
-	},
-};
-
-static void __init em_x270_init_gpio_keys(void)
-{
-	platform_device_register(&em_x270_gpio_keys);
-}
-#else
-static inline void em_x270_init_gpio_keys(void) {}
-#endif
-
-/* Quick Capture Interface and sensor setup */
-#if defined(CONFIG_VIDEO_PXA27x) || defined(CONFIG_VIDEO_PXA27x_MODULE)
-static struct regulator *em_x270_camera_ldo;
-
-static int em_x270_sensor_init(void)
-{
-	int ret;
-
-	ret = gpio_request(cam_reset, "camera reset");
-	if (ret)
-		return ret;
-
-	gpio_direction_output(cam_reset, 0);
-
-	em_x270_camera_ldo = regulator_get(NULL, "vcc cam");
-	if (em_x270_camera_ldo == NULL) {
-		gpio_free(cam_reset);
-		return -ENODEV;
-	}
-
-	ret = regulator_enable(em_x270_camera_ldo);
-	if (ret) {
-		regulator_put(em_x270_camera_ldo);
-		gpio_free(cam_reset);
-		return ret;
-	}
-
-	gpio_set_value(cam_reset, 1);
-
-	return 0;
-}
-
-struct pxacamera_platform_data em_x270_camera_platform_data = {
-	.flags  = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 |
-		PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN,
-	.mclk_10khz = 2600,
-};
-
-static int em_x270_sensor_power(struct device *dev, int on)
-{
-	int ret;
-	int is_on = regulator_is_enabled(em_x270_camera_ldo);
-
-	if (on == is_on)
-		return 0;
-
-	gpio_set_value(cam_reset, !on);
-
-	if (on)
-		ret = regulator_enable(em_x270_camera_ldo);
-	else
-		ret = regulator_disable(em_x270_camera_ldo);
-
-	if (ret)
-		return ret;
-
-	gpio_set_value(cam_reset, on);
-
-	return 0;
-}
-
-static struct i2c_board_info em_x270_i2c_cam_info[] = {
-	{
-		I2C_BOARD_INFO("mt9m111", 0x48),
-	},
-};
-
-static struct soc_camera_link iclink = {
-	.bus_id		= 0,
-	.power		= em_x270_sensor_power,
-	.board_info	= &em_x270_i2c_cam_info[0],
-	.i2c_adapter_id	= 0,
-};
-
-static struct platform_device em_x270_camera = {
-	.name	= "soc-camera-pdrv",
-	.id	= -1,
-	.dev	= {
-		.platform_data = &iclink,
-	},
-};
-
-static void  __init em_x270_init_camera(void)
-{
-	if (em_x270_sensor_init() == 0) {
-		pxa_set_camera_info(&em_x270_camera_platform_data);
-		platform_device_register(&em_x270_camera);
-	}
-}
-#else
-static inline void em_x270_init_camera(void) {}
-#endif
-
-static struct regulator_bulk_data em_x270_gps_consumer_supply = {
-	.supply		= "vcc gps",
-};
-
-static struct regulator_userspace_consumer_data em_x270_gps_consumer_data = {
-	.name		= "vcc gps",
-	.num_supplies	= 1,
-	.supplies	= &em_x270_gps_consumer_supply,
-};
-
-static struct platform_device em_x270_gps_userspace_consumer = {
-	.name		= "reg-userspace-consumer",
-	.id		= 0,
-	.dev		= {
-		.platform_data = &em_x270_gps_consumer_data,
-	},
-};
-
-static struct regulator_bulk_data em_x270_gprs_consumer_supply = {
-	.supply		= "vcc gprs",
-};
-
-static struct regulator_userspace_consumer_data em_x270_gprs_consumer_data = {
-	.name		= "vcc gprs",
-	.num_supplies	= 1,
-	.supplies	= &em_x270_gprs_consumer_supply
-};
-
-static struct platform_device em_x270_gprs_userspace_consumer = {
-	.name		= "reg-userspace-consumer",
-	.id		= 1,
-	.dev		= {
-		.platform_data = &em_x270_gprs_consumer_data,
-	}
-};
-
-static struct platform_device *em_x270_userspace_consumers[] = {
-	&em_x270_gps_userspace_consumer,
-	&em_x270_gprs_userspace_consumer,
-};
-
-static void __init em_x270_userspace_consumers_init(void)
-{
-	platform_add_devices(ARRAY_AND_SIZE(em_x270_userspace_consumers));
-}
-
-/* DA9030 related initializations */
-#define REGULATOR_CONSUMER(_name, _dev_name, _supply)		        \
-	static struct regulator_consumer_supply _name##_consumers[] = {	\
-		{							\
-			.dev_name = _dev_name,				\
-			.supply = _supply,				\
-		},							\
-	}
-
-REGULATOR_CONSUMER(ldo3, "reg-userspace-consumer.0", "vcc gps");
-REGULATOR_CONSUMER(ldo5, NULL, "vcc cam");
-REGULATOR_CONSUMER(ldo10, "pxa2xx-mci", "vcc sdio");
-REGULATOR_CONSUMER(ldo12, NULL, "vcc usb");
-REGULATOR_CONSUMER(ldo19, "reg-userspace-consumer.1", "vcc gprs");
-REGULATOR_CONSUMER(buck2, NULL, "vcc_core");
-
-#define REGULATOR_INIT(_ldo, _min_uV, _max_uV, _ops_mask)		\
-	static struct regulator_init_data _ldo##_data = {		\
-		.constraints = {					\
-			.min_uV = _min_uV,				\
-			.max_uV = _max_uV,				\
-			.state_mem = {					\
-				.enabled = 0,				\
-			},						\
-			.valid_ops_mask = _ops_mask,			\
-			.apply_uV = 1,					\
-		},							\
-		.num_consumer_supplies = ARRAY_SIZE(_ldo##_consumers),	\
-		.consumer_supplies = _ldo##_consumers,			\
-	};
-
-REGULATOR_INIT(ldo3, 3200000, 3200000, REGULATOR_CHANGE_STATUS);
-REGULATOR_INIT(ldo5, 3000000, 3000000, REGULATOR_CHANGE_STATUS);
-REGULATOR_INIT(ldo10, 2000000, 3200000,
-	       REGULATOR_CHANGE_STATUS | REGULATOR_CHANGE_VOLTAGE);
-REGULATOR_INIT(ldo12, 3000000, 3000000, REGULATOR_CHANGE_STATUS);
-REGULATOR_INIT(ldo19, 3200000, 3200000, REGULATOR_CHANGE_STATUS);
-REGULATOR_INIT(buck2, 1000000, 1650000, REGULATOR_CHANGE_VOLTAGE);
-
-struct led_info em_x270_led_info = {
-	.name = "em-x270:orange",
-	.default_trigger = "battery-charging-or-full",
-};
-
-struct power_supply_info em_x270_psy_info = {
-	.name = "battery",
-	.technology = POWER_SUPPLY_TECHNOLOGY_LIPO,
-	.voltage_max_design = 4200000,
-	.voltage_min_design = 3000000,
-	.use_for_apm = 1,
-};
-
-static void em_x270_battery_low(void)
-{
-#if defined(CONFIG_APM_EMULATION)
-	apm_queue_event(APM_LOW_BATTERY);
-#endif
-}
-
-static void em_x270_battery_critical(void)
-{
-#if defined(CONFIG_APM_EMULATION)
-	apm_queue_event(APM_CRITICAL_SUSPEND);
-#endif
-}
-
-struct da9030_battery_info em_x270_batterty_info = {
-	.battery_info = &em_x270_psy_info,
-
-	.charge_milliamp = 1000,
-	.charge_millivolt = 4200,
-
-	.vbat_low = 3600,
-	.vbat_crit = 3400,
-	.vbat_charge_start = 4100,
-	.vbat_charge_stop = 4200,
-	.vbat_charge_restart = 4000,
-
-	.vcharge_min = 3200,
-	.vcharge_max = 5500,
-
-	.tbat_low = 197,
-	.tbat_high = 78,
-	.tbat_restart = 100,
-
-	.batmon_interval = 0,
-
-	.battery_low = em_x270_battery_low,
-	.battery_critical = em_x270_battery_critical,
-};
-
-#define DA9030_SUBDEV(_name, _id, _pdata)	\
-	{					\
-		.name = "da903x-" #_name,	\
-		.id = DA9030_ID_##_id,		\
-		.platform_data = _pdata,	\
-	}
-
-#define DA9030_LDO(num)	DA9030_SUBDEV(regulator, LDO##num, &ldo##num##_data)
-
-struct da903x_subdev_info em_x270_da9030_subdevs[] = {
-	DA9030_LDO(3),
-	DA9030_LDO(5),
-	DA9030_LDO(10),
-	DA9030_LDO(12),
-	DA9030_LDO(19),
-
-	DA9030_SUBDEV(regulator, BUCK2, &buck2_data),
-
-	DA9030_SUBDEV(led, LED_PC, &em_x270_led_info),
-	DA9030_SUBDEV(backlight, WLED, &em_x270_led_info),
-	DA9030_SUBDEV(battery, BAT, &em_x270_batterty_info),
-};
-
-static struct da903x_platform_data em_x270_da9030_info = {
-	.num_subdevs = ARRAY_SIZE(em_x270_da9030_subdevs),
-	.subdevs = em_x270_da9030_subdevs,
-};
-
-static struct i2c_board_info em_x270_i2c_pmic_info = {
-	I2C_BOARD_INFO("da9030", 0x49),
-	.irq = PXA_GPIO_TO_IRQ(0),
-	.platform_data = &em_x270_da9030_info,
-};
-
-static struct i2c_pxa_platform_data em_x270_pwr_i2c_info = {
-	.use_pio = 1,
-};
-
-static void __init em_x270_init_da9030(void)
-{
-	pxa27x_set_i2c_power_info(&em_x270_pwr_i2c_info);
-	i2c_register_board_info(1, &em_x270_i2c_pmic_info, 1);
-}
-
-static struct pca953x_platform_data exeda_gpio_ext_pdata = {
-	.gpio_base = 128,
-};
-
-static struct i2c_board_info exeda_i2c_info[] = {
-	{
-		I2C_BOARD_INFO("pca9555", 0x21),
-		.platform_data = &exeda_gpio_ext_pdata,
-	},
-};
-
-static struct i2c_pxa_platform_data em_x270_i2c_info = {
-	.fast_mode = 1,
-};
-
-static void __init em_x270_init_i2c(void)
-{
-	pxa_set_i2c_info(&em_x270_i2c_info);
-
-	if (machine_is_exeda())
-		i2c_register_board_info(0, ARRAY_AND_SIZE(exeda_i2c_info));
-}
-
-static void __init em_x270_module_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(em_x270_pin_config));
-
-	mmc_cd = GPIO13_MMC_CD;
-	nand_rb = GPIO56_NAND_RB;
-	dm9000_flags = DM9000_PLATF_32BITONLY;
-	cam_reset = GPIO93_CAM_RESET;
-	usb_hub_reset = GPIO16_USB_HUB_RESET;
-}
-
-static void __init em_x270_exeda_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(exeda_pin_config));
-
-	mmc_cd = GPIO114_MMC_CD;
-	nand_rb = GPIO20_NAND_RB;
-	dm9000_flags = DM9000_PLATF_16BITONLY;
-	cam_reset = GPIO130_CAM_RESET;
-	usb_hub_reset = GPIO10_USB_HUB_RESET;
-}
-
-static void __init em_x270_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(common_pin_config));
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-#ifdef CONFIG_PM
-	pxa27x_set_pwrmode(PWRMODE_DEEPSLEEP);
-#endif
-
-	if (machine_is_em_x270())
-		em_x270_module_init();
-	else if (machine_is_exeda())
-		em_x270_exeda_init();
-	else
-		panic("Unsupported machine: %d\n", machine_arch_type);
-
-	em_x270_init_da9030();
-	em_x270_init_dm9000();
-	em_x270_init_rtc();
-	em_x270_init_nand();
-	em_x270_init_nor();
-	em_x270_init_lcd();
-	em_x270_init_mmc();
-	em_x270_init_ohci();
-	em_x270_init_keypad();
-	em_x270_init_gpio_keys();
-	em_x270_init_ac97();
-	em_x270_init_spi();
-	em_x270_init_i2c();
-	em_x270_init_camera();
-	em_x270_userspace_consumers_init();
-}
-
-MACHINE_START(EM_X270, "Compulab EM-X270")
-	.atag_offset	= 0x100,
-	.map_io		= pxa27x_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa27x_init_irq,
-	.handle_irq	= pxa27x_handle_irq,
-	.timer		= &pxa_timer,
-	.init_machine	= em_x270_init,
-	.restart	= pxa_restart,
-MACHINE_END
-
-MACHINE_START(EXEDA, "Compulab eXeda")
-	.atag_offset	= 0x100,
-	.map_io		= pxa27x_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa27x_init_irq,
-	.handle_irq	= pxa27x_handle_irq,
-	.timer		= &pxa_timer,
-	.init_machine	= em_x270_init,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/eseries.c b/ANDROID_3.4.5/arch/arm/mach-pxa/eseries.c
deleted file mode 100644
index 4cb2391a..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/eseries.c
+++ /dev/null
@@ -1,983 +0,0 @@
-/*
- * Hardware definitions for the Toshiba eseries PDAs
- *
- * Copyright (c) 2003 Ian Molton <spyro@f2s.com>
- *
- * This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/mfd/tc6387xb.h>
-#include <linux/mfd/tc6393xb.h>
-#include <linux/mfd/t7l66xb.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/partitions.h>
-#include <linux/usb/gpio_vbus.h>
-
-#include <video/w100fb.h>
-
-#include <asm/setup.h>
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-
-#include <mach/pxa25x.h>
-#include <mach/eseries-gpio.h>
-#include <mach/eseries-irq.h>
-#include <mach/audio.h>
-#include <mach/pxafb.h>
-#include <mach/udc.h>
-#include <mach/irda.h>
-
-#include "devices.h"
-#include "generic.h"
-#include "clock.h"
-
-/* Only e800 has 128MB RAM */
-void __init eseries_fixup(struct tag *tags, char **cmdline, struct meminfo *mi)
-{
-	mi->nr_banks=1;
-	mi->bank[0].start = 0xa0000000;
-	if (machine_is_e800())
-		mi->bank[0].size = (128*1024*1024);
-	else
-		mi->bank[0].size = (64*1024*1024);
-}
-
-struct gpio_vbus_mach_info e7xx_udc_info = {
-	.gpio_vbus   = GPIO_E7XX_USB_DISC,
-	.gpio_pullup = GPIO_E7XX_USB_PULLUP,
-	.gpio_pullup_inverted = 1
-};
-
-static struct platform_device e7xx_gpio_vbus = {
-	.name	= "gpio-vbus",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &e7xx_udc_info,
-	},
-};
-
-struct pxaficp_platform_data e7xx_ficp_platform_data = {
-	.gpio_pwdown		= GPIO_E7XX_IR_OFF,
-	.transceiver_cap	= IR_SIRMODE | IR_OFF,
-};
-
-int eseries_tmio_enable(struct platform_device *dev)
-{
-	/* Reset - bring SUSPEND high before PCLR */
-	gpio_set_value(GPIO_ESERIES_TMIO_SUSPEND, 0);
-	gpio_set_value(GPIO_ESERIES_TMIO_PCLR, 0);
-	msleep(1);
-	gpio_set_value(GPIO_ESERIES_TMIO_SUSPEND, 1);
-	msleep(1);
-	gpio_set_value(GPIO_ESERIES_TMIO_PCLR, 1);
-	msleep(1);
-	return 0;
-}
-
-int eseries_tmio_disable(struct platform_device *dev)
-{
-	gpio_set_value(GPIO_ESERIES_TMIO_SUSPEND, 0);
-	gpio_set_value(GPIO_ESERIES_TMIO_PCLR, 0);
-	return 0;
-}
-
-int eseries_tmio_suspend(struct platform_device *dev)
-{
-	gpio_set_value(GPIO_ESERIES_TMIO_SUSPEND, 0);
-	return 0;
-}
-
-int eseries_tmio_resume(struct platform_device *dev)
-{
-	gpio_set_value(GPIO_ESERIES_TMIO_SUSPEND, 1);
-	msleep(1);
-	return 0;
-}
-
-void eseries_get_tmio_gpios(void)
-{
-	gpio_request(GPIO_ESERIES_TMIO_SUSPEND, NULL);
-	gpio_request(GPIO_ESERIES_TMIO_PCLR, NULL);
-	gpio_direction_output(GPIO_ESERIES_TMIO_SUSPEND, 0);
-	gpio_direction_output(GPIO_ESERIES_TMIO_PCLR, 0);
-}
-
-/* TMIO controller uses the same resources on all e-series machines. */
-struct resource eseries_tmio_resources[] = {
-	[0] = {
-		.start  = PXA_CS4_PHYS,
-		.end    = PXA_CS4_PHYS + 0x1fffff,
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = PXA_GPIO_TO_IRQ(GPIO_ESERIES_TMIO_IRQ),
-		.end    = PXA_GPIO_TO_IRQ(GPIO_ESERIES_TMIO_IRQ),
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-/* Some e-series hardware cannot control the 32K clock */
-static void clk_32k_dummy(struct clk *clk)
-{
-}
-
-static const struct clkops clk_32k_dummy_ops = {
-	.enable         = clk_32k_dummy,
-	.disable        = clk_32k_dummy,
-};
-
-static struct clk tmio_dummy_clk = {
-	.ops	= &clk_32k_dummy_ops,
-	.rate	= 32768,
-};
-
-static struct clk_lookup eseries_clkregs[] = {
-	INIT_CLKREG(&tmio_dummy_clk, NULL, "CLK_CK32K"),
-};
-
-static void __init eseries_register_clks(void)
-{
-	clkdev_add_table(eseries_clkregs, ARRAY_SIZE(eseries_clkregs));
-}
-
-#ifdef CONFIG_MACH_E330
-/* -------------------- e330 tc6387xb parameters -------------------- */
-
-static struct tc6387xb_platform_data e330_tc6387xb_info = {
-	.enable   = &eseries_tmio_enable,
-	.disable  = &eseries_tmio_disable,
-	.suspend  = &eseries_tmio_suspend,
-	.resume   = &eseries_tmio_resume,
-};
-
-static struct platform_device e330_tc6387xb_device = {
-	.name           = "tc6387xb",
-	.id             = -1,
-	.dev            = {
-		.platform_data = &e330_tc6387xb_info,
-	},
-	.num_resources = 2,
-	.resource      = eseries_tmio_resources,
-};
-
-/* --------------------------------------------------------------- */
-
-static struct platform_device *e330_devices[] __initdata = {
-	&e330_tc6387xb_device,
-	&e7xx_gpio_vbus,
-};
-
-static void __init e330_init(void)
-{
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-	eseries_register_clks();
-	eseries_get_tmio_gpios();
-	platform_add_devices(ARRAY_AND_SIZE(e330_devices));
-}
-
-MACHINE_START(E330, "Toshiba e330")
-	/* Maintainer: Ian Molton (spyro@f2s.com) */
-	.atag_offset	= 0x100,
-	.map_io		= pxa25x_map_io,
-	.nr_irqs	= ESERIES_NR_IRQS,
-	.init_irq	= pxa25x_init_irq,
-	.handle_irq	= pxa25x_handle_irq,
-	.fixup		= eseries_fixup,
-	.init_machine	= e330_init,
-	.timer		= &pxa_timer,
-	.restart	= pxa_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_E350
-/* -------------------- e350 t7l66xb parameters -------------------- */
-
-static struct t7l66xb_platform_data e350_t7l66xb_info = {
-	.irq_base               = IRQ_BOARD_START,
-	.enable                 = &eseries_tmio_enable,
-	.suspend                = &eseries_tmio_suspend,
-	.resume                 = &eseries_tmio_resume,
-};
-
-static struct platform_device e350_t7l66xb_device = {
-	.name           = "t7l66xb",
-	.id             = -1,
-	.dev            = {
-		.platform_data = &e350_t7l66xb_info,
-	},
-	.num_resources = 2,
-	.resource      = eseries_tmio_resources,
-};
-
-/* ---------------------------------------------------------- */
-
-static struct platform_device *e350_devices[] __initdata = {
-	&e350_t7l66xb_device,
-	&e7xx_gpio_vbus,
-};
-
-static void __init e350_init(void)
-{
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-	eseries_register_clks();
-	eseries_get_tmio_gpios();
-	platform_add_devices(ARRAY_AND_SIZE(e350_devices));
-}
-
-MACHINE_START(E350, "Toshiba e350")
-	/* Maintainer: Ian Molton (spyro@f2s.com) */
-	.atag_offset	= 0x100,
-	.map_io		= pxa25x_map_io,
-	.nr_irqs	= ESERIES_NR_IRQS,
-	.init_irq	= pxa25x_init_irq,
-	.handle_irq	= pxa25x_handle_irq,
-	.fixup		= eseries_fixup,
-	.init_machine	= e350_init,
-	.timer		= &pxa_timer,
-	.restart	= pxa_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_E400
-/* ------------------------ E400 LCD definitions ------------------------ */
-
-static struct pxafb_mode_info e400_pxafb_mode_info = {
-	.pixclock       = 140703,
-	.xres           = 240,
-	.yres           = 320,
-	.bpp            = 16,
-	.hsync_len      = 4,
-	.left_margin    = 28,
-	.right_margin   = 8,
-	.vsync_len      = 3,
-	.upper_margin   = 5,
-	.lower_margin   = 6,
-	.sync           = 0,
-};
-
-static struct pxafb_mach_info e400_pxafb_mach_info = {
-	.modes          = &e400_pxafb_mode_info,
-	.num_modes      = 1,
-	.lcd_conn	= LCD_COLOR_TFT_16BPP,
-	.lccr3          = 0,
-	.pxafb_backlight_power  = NULL,
-};
-
-/* ------------------------ E400 MFP config ----------------------------- */
-
-static unsigned long e400_pin_config[] __initdata = {
-	/* Chip selects */
-	GPIO15_nCS_1,   /* CS1 - Flash */
-	GPIO80_nCS_4,   /* CS4 - TMIO */
-
-	/* Clocks */
-	GPIO12_32KHz,
-
-	/* BTUART */
-	GPIO42_BTUART_RXD,
-	GPIO43_BTUART_TXD,
-	GPIO44_BTUART_CTS,
-
-	/* TMIO controller */
-	GPIO19_GPIO, /* t7l66xb #PCLR */
-	GPIO45_GPIO, /* t7l66xb #SUSPEND (NOT BTUART!) */
-
-	/* wakeup */
-	GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
-};
-
-/* ---------------------------------------------------------------------- */
-
-static struct mtd_partition partition_a = {
-	.name = "Internal NAND flash",
-	.offset =  0,
-	.size =  MTDPART_SIZ_FULL,
-};
-
-static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
-
-static struct nand_bbt_descr e400_t7l66xb_nand_bbt = {
-	.options = 0,
-	.offs = 4,
-	.len = 2,
-	.pattern = scan_ff_pattern
-};
-
-static struct tmio_nand_data e400_t7l66xb_nand_config = {
-	.num_partitions = 1,
-	.partition = &partition_a,
-	.badblock_pattern = &e400_t7l66xb_nand_bbt,
-};
-
-static struct t7l66xb_platform_data e400_t7l66xb_info = {
-	.irq_base 		= IRQ_BOARD_START,
-	.enable                 = &eseries_tmio_enable,
-	.suspend                = &eseries_tmio_suspend,
-	.resume                 = &eseries_tmio_resume,
-
-	.nand_data              = &e400_t7l66xb_nand_config,
-};
-
-static struct platform_device e400_t7l66xb_device = {
-	.name           = "t7l66xb",
-	.id             = -1,
-	.dev            = {
-		.platform_data = &e400_t7l66xb_info,
-	},
-	.num_resources = 2,
-	.resource      = eseries_tmio_resources,
-};
-
-/* ---------------------------------------------------------- */
-
-static struct platform_device *e400_devices[] __initdata = {
-	&e400_t7l66xb_device,
-	&e7xx_gpio_vbus,
-};
-
-static void __init e400_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(e400_pin_config));
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-	/* Fixme - e400 may have a switched clock */
-	eseries_register_clks();
-	eseries_get_tmio_gpios();
-	pxa_set_fb_info(NULL, &e400_pxafb_mach_info);
-	platform_add_devices(ARRAY_AND_SIZE(e400_devices));
-}
-
-MACHINE_START(E400, "Toshiba e400")
-	/* Maintainer: Ian Molton (spyro@f2s.com) */
-	.atag_offset	= 0x100,
-	.map_io		= pxa25x_map_io,
-	.nr_irqs	= ESERIES_NR_IRQS,
-	.init_irq	= pxa25x_init_irq,
-	.handle_irq	= pxa25x_handle_irq,
-	.fixup		= eseries_fixup,
-	.init_machine	= e400_init,
-	.timer		= &pxa_timer,
-	.restart	= pxa_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_E740
-/* ------------------------ e740 video support --------------------------- */
-
-static struct w100_gen_regs e740_lcd_regs = {
-	.lcd_format =            0x00008023,
-	.lcdd_cntl1 =            0x0f000000,
-	.lcdd_cntl2 =            0x0003ffff,
-	.genlcd_cntl1 =          0x00ffff03,
-	.genlcd_cntl2 =          0x003c0f03,
-	.genlcd_cntl3 =          0x000143aa,
-};
-
-static struct w100_mode e740_lcd_mode = {
-	.xres            = 240,
-	.yres            = 320,
-	.left_margin     = 20,
-	.right_margin    = 28,
-	.upper_margin    = 9,
-	.lower_margin    = 8,
-	.crtc_ss         = 0x80140013,
-	.crtc_ls         = 0x81150110,
-	.crtc_gs         = 0x80050005,
-	.crtc_vpos_gs    = 0x000a0009,
-	.crtc_rev        = 0x0040010a,
-	.crtc_dclk       = 0xa906000a,
-	.crtc_gclk       = 0x80050108,
-	.crtc_goe        = 0x80050108,
-	.pll_freq        = 57,
-	.pixclk_divider         = 4,
-	.pixclk_divider_rotated = 4,
-	.pixclk_src     = CLK_SRC_XTAL,
-	.sysclk_divider  = 1,
-	.sysclk_src     = CLK_SRC_PLL,
-	.crtc_ps1_active =       0x41060010,
-};
-
-static struct w100_gpio_regs e740_w100_gpio_info = {
-	.init_data1 = 0x21002103,
-	.gpio_dir1  = 0xffffdeff,
-	.gpio_oe1   = 0x03c00643,
-	.init_data2 = 0x003f003f,
-	.gpio_dir2  = 0xffffffff,
-	.gpio_oe2   = 0x000000ff,
-};
-
-static struct w100fb_mach_info e740_fb_info = {
-	.modelist   = &e740_lcd_mode,
-	.num_modes  = 1,
-	.regs       = &e740_lcd_regs,
-	.gpio       = &e740_w100_gpio_info,
-	.xtal_freq = 14318000,
-	.xtal_dbl   = 1,
-};
-
-static struct resource e740_fb_resources[] = {
-	[0] = {
-		.start          = 0x0c000000,
-		.end            = 0x0cffffff,
-		.flags          = IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device e740_fb_device = {
-	.name           = "w100fb",
-	.id             = -1,
-	.dev            = {
-		.platform_data  = &e740_fb_info,
-	},
-	.num_resources  = ARRAY_SIZE(e740_fb_resources),
-	.resource       = e740_fb_resources,
-};
-
-/* --------------------------- MFP Pin config -------------------------- */
-
-static unsigned long e740_pin_config[] __initdata = {
-	/* Chip selects */
-	GPIO15_nCS_1,   /* CS1 - Flash */
-	GPIO79_nCS_3,   /* CS3 - IMAGEON */
-	GPIO80_nCS_4,   /* CS4 - TMIO */
-
-	/* Clocks */
-	GPIO12_32KHz,
-
-	/* BTUART */
-	GPIO42_BTUART_RXD,
-	GPIO43_BTUART_TXD,
-	GPIO44_BTUART_CTS,
-
-	/* TMIO controller */
-	GPIO19_GPIO, /* t7l66xb #PCLR */
-	GPIO45_GPIO, /* t7l66xb #SUSPEND (NOT BTUART!) */
-
-	/* UDC */
-	GPIO13_GPIO,
-	GPIO3_GPIO,
-
-	/* IrDA */
-	GPIO38_GPIO | MFP_LPM_DRIVE_HIGH,
-
-	/* AC97 */
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-
-	/* Audio power control */
-	GPIO16_GPIO,  /* AC97 codec AVDD2 supply (analogue power) */
-	GPIO40_GPIO,  /* Mic amp power */
-	GPIO41_GPIO,  /* Headphone amp power */
-
-	/* PC Card */
-	GPIO8_GPIO,   /* CD0 */
-	GPIO44_GPIO,  /* CD1 */
-	GPIO11_GPIO,  /* IRQ0 */
-	GPIO6_GPIO,   /* IRQ1 */
-	GPIO27_GPIO,  /* RST0 */
-	GPIO24_GPIO,  /* RST1 */
-	GPIO20_GPIO,  /* PWR0 */
-	GPIO23_GPIO,  /* PWR1 */
-	GPIO48_nPOE,
-	GPIO49_nPWE,
-	GPIO50_nPIOR,
-	GPIO51_nPIOW,
-	GPIO52_nPCE_1,
-	GPIO53_nPCE_2,
-	GPIO54_nPSKTSEL,
-	GPIO55_nPREG,
-	GPIO56_nPWAIT,
-	GPIO57_nIOIS16,
-
-	/* wakeup */
-	GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
-};
-
-/* -------------------- e740 t7l66xb parameters -------------------- */
-
-static struct t7l66xb_platform_data e740_t7l66xb_info = {
-	.irq_base 		= IRQ_BOARD_START,
-	.enable                 = &eseries_tmio_enable,
-	.suspend                = &eseries_tmio_suspend,
-	.resume                 = &eseries_tmio_resume,
-};
-
-static struct platform_device e740_t7l66xb_device = {
-	.name           = "t7l66xb",
-	.id             = -1,
-	.dev            = {
-		.platform_data = &e740_t7l66xb_info,
-	},
-	.num_resources = 2,
-	.resource      = eseries_tmio_resources,
-};
-
-static struct platform_device e740_audio_device = {
-	.name		= "e740-audio",
-	.id		= -1,
-};
-
-/* ----------------------------------------------------------------------- */
-
-static struct platform_device *e740_devices[] __initdata = {
-	&e740_fb_device,
-	&e740_t7l66xb_device,
-	&e7xx_gpio_vbus,
-	&e740_audio_device,
-};
-
-static void __init e740_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(e740_pin_config));
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-	eseries_register_clks();
-	clk_add_alias("CLK_CK48M", e740_t7l66xb_device.name,
-			"UDCCLK", &pxa25x_device_udc.dev),
-	eseries_get_tmio_gpios();
-	platform_add_devices(ARRAY_AND_SIZE(e740_devices));
-	pxa_set_ac97_info(NULL);
-	pxa_set_ficp_info(&e7xx_ficp_platform_data);
-}
-
-MACHINE_START(E740, "Toshiba e740")
-	/* Maintainer: Ian Molton (spyro@f2s.com) */
-	.atag_offset	= 0x100,
-	.map_io		= pxa25x_map_io,
-	.nr_irqs	= ESERIES_NR_IRQS,
-	.init_irq	= pxa25x_init_irq,
-	.handle_irq	= pxa25x_handle_irq,
-	.fixup		= eseries_fixup,
-	.init_machine	= e740_init,
-	.timer		= &pxa_timer,
-	.restart	= pxa_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_E750
-/* ---------------------- E750 LCD definitions -------------------- */
-
-static struct w100_gen_regs e750_lcd_regs = {
-	.lcd_format =            0x00008003,
-	.lcdd_cntl1 =            0x00000000,
-	.lcdd_cntl2 =            0x0003ffff,
-	.genlcd_cntl1 =          0x00fff003,
-	.genlcd_cntl2 =          0x003c0f03,
-	.genlcd_cntl3 =          0x000143aa,
-};
-
-static struct w100_mode e750_lcd_mode = {
-	.xres            = 240,
-	.yres            = 320,
-	.left_margin     = 21,
-	.right_margin    = 22,
-	.upper_margin    = 5,
-	.lower_margin    = 4,
-	.crtc_ss         = 0x80150014,
-	.crtc_ls         = 0x8014000d,
-	.crtc_gs         = 0xc1000005,
-	.crtc_vpos_gs    = 0x00020147,
-	.crtc_rev        = 0x0040010a,
-	.crtc_dclk       = 0xa1700030,
-	.crtc_gclk       = 0x80cc0015,
-	.crtc_goe        = 0x80cc0015,
-	.crtc_ps1_active = 0x61060017,
-	.pll_freq        = 57,
-	.pixclk_divider         = 4,
-	.pixclk_divider_rotated = 4,
-	.pixclk_src     = CLK_SRC_XTAL,
-	.sysclk_divider  = 1,
-	.sysclk_src     = CLK_SRC_PLL,
-};
-
-static struct w100_gpio_regs e750_w100_gpio_info = {
-	.init_data1 = 0x01192f1b,
-	.gpio_dir1  = 0xd5ffdeff,
-	.gpio_oe1   = 0x000020bf,
-	.init_data2 = 0x010f010f,
-	.gpio_dir2  = 0xffffffff,
-	.gpio_oe2   = 0x000001cf,
-};
-
-static struct w100fb_mach_info e750_fb_info = {
-	.modelist   = &e750_lcd_mode,
-	.num_modes  = 1,
-	.regs       = &e750_lcd_regs,
-	.gpio       = &e750_w100_gpio_info,
-	.xtal_freq  = 14318000,
-	.xtal_dbl   = 1,
-};
-
-static struct resource e750_fb_resources[] = {
-	[0] = {
-		.start          = 0x0c000000,
-		.end            = 0x0cffffff,
-		.flags          = IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device e750_fb_device = {
-	.name           = "w100fb",
-	.id             = -1,
-	.dev            = {
-		.platform_data  = &e750_fb_info,
-	},
-	.num_resources  = ARRAY_SIZE(e750_fb_resources),
-	.resource       = e750_fb_resources,
-};
-
-/* -------------------- e750 MFP parameters -------------------- */
-
-static unsigned long e750_pin_config[] __initdata = {
-	/* Chip selects */
-	GPIO15_nCS_1,   /* CS1 - Flash */
-	GPIO79_nCS_3,   /* CS3 - IMAGEON */
-	GPIO80_nCS_4,   /* CS4 - TMIO */
-
-	/* Clocks */
-	GPIO11_3_6MHz,
-
-	/* BTUART */
-	GPIO42_BTUART_RXD,
-	GPIO43_BTUART_TXD,
-	GPIO44_BTUART_CTS,
-
-	/* TMIO controller */
-	GPIO19_GPIO, /* t7l66xb #PCLR */
-	GPIO45_GPIO, /* t7l66xb #SUSPEND (NOT BTUART!) */
-
-	/* UDC */
-	GPIO13_GPIO,
-	GPIO3_GPIO,
-
-	/* IrDA */
-	GPIO38_GPIO | MFP_LPM_DRIVE_HIGH,
-
-	/* AC97 */
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-
-	/* Audio power control */
-	GPIO4_GPIO,  /* Headphone amp power */
-	GPIO7_GPIO,  /* Speaker amp power */
-	GPIO37_GPIO, /* Headphone detect */
-
-	/* PC Card */
-	GPIO8_GPIO,   /* CD0 */
-	GPIO44_GPIO,  /* CD1 */
-	GPIO11_GPIO,  /* IRQ0 */
-	GPIO6_GPIO,   /* IRQ1 */
-	GPIO27_GPIO,  /* RST0 */
-	GPIO24_GPIO,  /* RST1 */
-	GPIO20_GPIO,  /* PWR0 */
-	GPIO23_GPIO,  /* PWR1 */
-	GPIO48_nPOE,
-	GPIO49_nPWE,
-	GPIO50_nPIOR,
-	GPIO51_nPIOW,
-	GPIO52_nPCE_1,
-	GPIO53_nPCE_2,
-	GPIO54_nPSKTSEL,
-	GPIO55_nPREG,
-	GPIO56_nPWAIT,
-	GPIO57_nIOIS16,
-
-	/* wakeup */
-	GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
-};
-
-/* ----------------- e750 tc6393xb parameters ------------------ */
-
-static struct tc6393xb_platform_data e750_tc6393xb_info = {
-	.irq_base       = IRQ_BOARD_START,
-	.scr_pll2cr     = 0x0cc1,
-	.scr_gper       = 0,
-	.gpio_base      = -1,
-	.suspend        = &eseries_tmio_suspend,
-	.resume         = &eseries_tmio_resume,
-	.enable         = &eseries_tmio_enable,
-	.disable        = &eseries_tmio_disable,
-};
-
-static struct platform_device e750_tc6393xb_device = {
-	.name           = "tc6393xb",
-	.id             = -1,
-	.dev            = {
-		.platform_data = &e750_tc6393xb_info,
-	},
-	.num_resources = 2,
-	.resource      = eseries_tmio_resources,
-};
-
-static struct platform_device e750_audio_device = {
-	.name		= "e750-audio",
-	.id		= -1,
-};
-
-/* ------------------------------------------------------------- */
-
-static struct platform_device *e750_devices[] __initdata = {
-	&e750_fb_device,
-	&e750_tc6393xb_device,
-	&e7xx_gpio_vbus,
-	&e750_audio_device,
-};
-
-static void __init e750_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(e750_pin_config));
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-	clk_add_alias("CLK_CK3P6MI", e750_tc6393xb_device.name,
-			"GPIO11_CLK", NULL),
-	eseries_get_tmio_gpios();
-	platform_add_devices(ARRAY_AND_SIZE(e750_devices));
-	pxa_set_ac97_info(NULL);
-	pxa_set_ficp_info(&e7xx_ficp_platform_data);
-}
-
-MACHINE_START(E750, "Toshiba e750")
-	/* Maintainer: Ian Molton (spyro@f2s.com) */
-	.atag_offset	= 0x100,
-	.map_io		= pxa25x_map_io,
-	.nr_irqs	= ESERIES_NR_IRQS,
-	.init_irq	= pxa25x_init_irq,
-	.handle_irq	= pxa25x_handle_irq,
-	.fixup		= eseries_fixup,
-	.init_machine	= e750_init,
-	.timer		= &pxa_timer,
-	.restart	= pxa_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_E800
-/* ------------------------ e800 LCD definitions ------------------------- */
-
-static unsigned long e800_pin_config[] __initdata = {
-	/* AC97 */
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-};
-
-static struct w100_gen_regs e800_lcd_regs = {
-	.lcd_format =            0x00008003,
-	.lcdd_cntl1 =            0x02a00000,
-	.lcdd_cntl2 =            0x0003ffff,
-	.genlcd_cntl1 =          0x000ff2a3,
-	.genlcd_cntl2 =          0x000002a3,
-	.genlcd_cntl3 =          0x000102aa,
-};
-
-static struct w100_mode e800_lcd_mode[2] = {
-	[0] = {
-		.xres            = 480,
-		.yres            = 640,
-		.left_margin     = 52,
-		.right_margin    = 148,
-		.upper_margin    = 2,
-		.lower_margin    = 6,
-		.crtc_ss         = 0x80350034,
-		.crtc_ls         = 0x802b0026,
-		.crtc_gs         = 0x80160016,
-		.crtc_vpos_gs    = 0x00020003,
-		.crtc_rev        = 0x0040001d,
-		.crtc_dclk       = 0xe0000000,
-		.crtc_gclk       = 0x82a50049,
-		.crtc_goe        = 0x80ee001c,
-		.crtc_ps1_active = 0x00000000,
-		.pll_freq        = 128,
-		.pixclk_divider         = 4,
-		.pixclk_divider_rotated = 6,
-		.pixclk_src     = CLK_SRC_PLL,
-		.sysclk_divider  = 0,
-		.sysclk_src     = CLK_SRC_PLL,
-	},
-	[1] = {
-		.xres            = 240,
-		.yres            = 320,
-		.left_margin     = 15,
-		.right_margin    = 88,
-		.upper_margin    = 0,
-		.lower_margin    = 7,
-		.crtc_ss         = 0xd010000f,
-		.crtc_ls         = 0x80070003,
-		.crtc_gs         = 0x80000000,
-		.crtc_vpos_gs    = 0x01460147,
-		.crtc_rev        = 0x00400003,
-		.crtc_dclk       = 0xa1700030,
-		.crtc_gclk       = 0x814b0008,
-		.crtc_goe        = 0x80cc0015,
-		.crtc_ps1_active = 0x00000000,
-		.pll_freq        = 100,
-		.pixclk_divider         = 6, /* Wince uses 14 which gives a */
-		.pixclk_divider_rotated = 6, /* 7MHz Pclk. We use a 14MHz one */
-		.pixclk_src     = CLK_SRC_PLL,
-		.sysclk_divider  = 0,
-		.sysclk_src     = CLK_SRC_PLL,
-	}
-};
-
-
-static struct w100_gpio_regs e800_w100_gpio_info = {
-	.init_data1 = 0xc13fc019,
-	.gpio_dir1  = 0x3e40df7f,
-	.gpio_oe1   = 0x003c3000,
-	.init_data2 = 0x00000000,
-	.gpio_dir2  = 0x00000000,
-	.gpio_oe2   = 0x00000000,
-};
-
-static struct w100_mem_info e800_w100_mem_info = {
-	.ext_cntl        = 0x09640011,
-	.sdram_mode_reg  = 0x00600021,
-	.ext_timing_cntl = 0x10001545,
-	.io_cntl         = 0x7ddd7333,
-	.size            = 0x1fffff,
-};
-
-static void e800_tg_change(struct w100fb_par *par)
-{
-	unsigned long tmp;
-
-	tmp = w100fb_gpio_read(W100_GPIO_PORT_A);
-	if (par->mode->xres == 480)
-		tmp |= 0x100;
-	else
-		tmp &= ~0x100;
-	w100fb_gpio_write(W100_GPIO_PORT_A, tmp);
-}
-
-static struct w100_tg_info e800_tg_info = {
-	.change = e800_tg_change,
-};
-
-static struct w100fb_mach_info e800_fb_info = {
-	.modelist   = e800_lcd_mode,
-	.num_modes  = 2,
-	.regs       = &e800_lcd_regs,
-	.gpio       = &e800_w100_gpio_info,
-	.mem        = &e800_w100_mem_info,
-	.tg         = &e800_tg_info,
-	.xtal_freq  = 16000000,
-};
-
-static struct resource e800_fb_resources[] = {
-	[0] = {
-		.start          = 0x0c000000,
-		.end            = 0x0cffffff,
-		.flags          = IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device e800_fb_device = {
-	.name           = "w100fb",
-	.id             = -1,
-	.dev            = {
-		.platform_data  = &e800_fb_info,
-	},
-	.num_resources  = ARRAY_SIZE(e800_fb_resources),
-	.resource       = e800_fb_resources,
-};
-
-/* --------------------------- UDC definitions --------------------------- */
-
-static struct gpio_vbus_mach_info e800_udc_info = {
-	.gpio_vbus   = GPIO_E800_USB_DISC,
-	.gpio_pullup = GPIO_E800_USB_PULLUP,
-	.gpio_pullup_inverted = 1
-};
-
-static struct platform_device e800_gpio_vbus = {
-	.name	= "gpio-vbus",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &e800_udc_info,
-	},
-};
-
-
-/* ----------------- e800 tc6393xb parameters ------------------ */
-
-static struct tc6393xb_platform_data e800_tc6393xb_info = {
-	.irq_base       = IRQ_BOARD_START,
-	.scr_pll2cr     = 0x0cc1,
-	.scr_gper       = 0,
-	.gpio_base      = -1,
-	.suspend        = &eseries_tmio_suspend,
-	.resume         = &eseries_tmio_resume,
-	.enable         = &eseries_tmio_enable,
-	.disable        = &eseries_tmio_disable,
-};
-
-static struct platform_device e800_tc6393xb_device = {
-	.name           = "tc6393xb",
-	.id             = -1,
-	.dev            = {
-		.platform_data = &e800_tc6393xb_info,
-	},
-	.num_resources = 2,
-	.resource      = eseries_tmio_resources,
-};
-
-static struct platform_device e800_audio_device = {
-	.name		= "e800-audio",
-	.id		= -1,
-};
-
-/* ----------------------------------------------------------------------- */
-
-static struct platform_device *e800_devices[] __initdata = {
-	&e800_fb_device,
-	&e800_tc6393xb_device,
-	&e800_gpio_vbus,
-	&e800_audio_device,
-};
-
-static void __init e800_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(e800_pin_config));
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-	clk_add_alias("CLK_CK3P6MI", e800_tc6393xb_device.name,
-			"GPIO11_CLK", NULL),
-	eseries_get_tmio_gpios();
-	platform_add_devices(ARRAY_AND_SIZE(e800_devices));
-	pxa_set_ac97_info(NULL);
-}
-
-MACHINE_START(E800, "Toshiba e800")
-	/* Maintainer: Ian Molton (spyro@f2s.com) */
-	.atag_offset	= 0x100,
-	.map_io		= pxa25x_map_io,
-	.nr_irqs	= ESERIES_NR_IRQS,
-	.init_irq	= pxa25x_init_irq,
-	.handle_irq	= pxa25x_handle_irq,
-	.fixup		= eseries_fixup,
-	.init_machine	= e800_init,
-	.timer		= &pxa_timer,
-	.restart	= pxa_restart,
-MACHINE_END
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/eseries.h b/ANDROID_3.4.5/arch/arm/mach-pxa/eseries.h
deleted file mode 100644
index b96949dd..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/eseries.h
+++ /dev/null
@@ -1,14 +0,0 @@
-void __init eseries_fixup(struct tag *tags, char **cmdline, struct meminfo *mi);
-
-extern struct pxa2xx_udc_mach_info e7xx_udc_mach_info;
-extern struct pxaficp_platform_data e7xx_ficp_platform_data;
-extern int e7xx_irda_init(void);
-
-extern int eseries_tmio_enable(struct platform_device *dev);
-extern int eseries_tmio_disable(struct platform_device *dev);
-extern int eseries_tmio_suspend(struct platform_device *dev);
-extern int eseries_tmio_resume(struct platform_device *dev);
-extern void eseries_get_tmio_gpios(void);
-extern struct resource eseries_tmio_resources[];
-extern struct platform_device e300_tc6387xb_device;
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/ezx.c b/ANDROID_3.4.5/arch/arm/mach-pxa/ezx.c
deleted file mode 100644
index 15ab2533..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/ezx.c
+++ /dev/null
@@ -1,1243 +0,0 @@
-/*
- *  ezx.c - Common code for the EZX platform.
- *
- *  Copyright (C) 2005-2006 Harald Welte <laforge@openezx.org>,
- *		  2007-2008 Daniel Ribeiro <drwyrm@gmail.com>,
- *		  2007-2008 Stefan Schmidt <stefan@datenfreihafen.org>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/pwm_backlight.h>
-#include <linux/input.h>
-#include <linux/gpio.h>
-#include <linux/gpio_keys.h>
-#include <linux/leds-lp3944.h>
-#include <linux/i2c/pxa-i2c.h>
-
-#include <media/soc_camera.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include <mach/pxa27x.h>
-#include <mach/pxafb.h>
-#include <mach/ohci.h>
-#include <mach/hardware.h>
-#include <plat/pxa27x_keypad.h>
-#include <mach/camera.h>
-
-#include "devices.h"
-#include "generic.h"
-
-#define EZX_NR_IRQS			(IRQ_BOARD_START + 24)
-
-#define GPIO12_A780_FLIP_LID 		12
-#define GPIO15_A1200_FLIP_LID 		15
-#define GPIO15_A910_FLIP_LID 		15
-#define GPIO12_E680_LOCK_SWITCH 	12
-#define GPIO15_E6_LOCK_SWITCH 		15
-#define GPIO50_nCAM_EN			50
-#define GPIO19_GEN1_CAM_RST		19
-#define GPIO28_GEN2_CAM_RST		28
-
-static struct platform_pwm_backlight_data ezx_backlight_data = {
-	.pwm_id		= 0,
-	.max_brightness	= 1023,
-	.dft_brightness	= 1023,
-	.pwm_period_ns	= 78770,
-};
-
-static struct platform_device ezx_backlight_device = {
-	.name		= "pwm-backlight",
-	.dev		= {
-		.parent	= &pxa27x_device_pwm0.dev,
-		.platform_data = &ezx_backlight_data,
-	},
-};
-
-static struct pxafb_mode_info mode_ezx_old = {
-	.pixclock		= 150000,
-	.xres			= 240,
-	.yres			= 320,
-	.bpp			= 16,
-	.hsync_len		= 10,
-	.left_margin		= 20,
-	.right_margin		= 10,
-	.vsync_len		= 2,
-	.upper_margin		= 3,
-	.lower_margin		= 2,
-	.sync			= 0,
-};
-
-static struct pxafb_mach_info ezx_fb_info_1 = {
-	.modes		= &mode_ezx_old,
-	.num_modes	= 1,
-	.lcd_conn	= LCD_COLOR_TFT_16BPP,
-};
-
-static struct pxafb_mode_info mode_72r89803y01 = {
-	.pixclock		= 192308,
-	.xres			= 240,
-	.yres			= 320,
-	.bpp			= 32,
-	.depth			= 18,
-	.hsync_len		= 10,
-	.left_margin		= 20,
-	.right_margin		= 10,
-	.vsync_len		= 2,
-	.upper_margin		= 3,
-	.lower_margin		= 2,
-	.sync			= 0,
-};
-
-static struct pxafb_mach_info ezx_fb_info_2 = {
-	.modes		= &mode_72r89803y01,
-	.num_modes	= 1,
-	.lcd_conn	= LCD_COLOR_TFT_18BPP,
-};
-
-static struct platform_device *ezx_devices[] __initdata = {
-	&ezx_backlight_device,
-};
-
-static unsigned long ezx_pin_config[] __initdata = {
-	/* PWM backlight */
-	GPIO16_PWM0_OUT,
-
-	/* BTUART */
-	GPIO42_BTUART_RXD,
-	GPIO43_BTUART_TXD,
-	GPIO44_BTUART_CTS,
-	GPIO45_BTUART_RTS,
-
-	/* I2C */
-	GPIO117_I2C_SCL,
-	GPIO118_I2C_SDA,
-
-	/* PCAP SSP */
-	GPIO29_SSP1_SCLK,
-	GPIO25_SSP1_TXD,
-	GPIO26_SSP1_RXD,
-	GPIO24_GPIO,				/* pcap chip select */
-	GPIO1_GPIO | WAKEUP_ON_EDGE_RISE,	/* pcap interrupt */
-	GPIO4_GPIO | MFP_LPM_DRIVE_HIGH,	/* WDI_AP */
-	GPIO55_GPIO | MFP_LPM_DRIVE_HIGH,	/* SYS_RESTART */
-
-	/* MMC */
-	GPIO32_MMC_CLK,
-	GPIO92_MMC_DAT_0,
-	GPIO109_MMC_DAT_1,
-	GPIO110_MMC_DAT_2,
-	GPIO111_MMC_DAT_3,
-	GPIO112_MMC_CMD,
-	GPIO11_GPIO,				/* mmc detect */
-
-	/* usb to external transceiver */
-	GPIO34_USB_P2_2,
-	GPIO35_USB_P2_1,
-	GPIO36_USB_P2_4,
-	GPIO39_USB_P2_6,
-	GPIO40_USB_P2_5,
-	GPIO53_USB_P2_3,
-
-	/* usb to Neptune GSM chip */
-	GPIO30_USB_P3_2,
-	GPIO31_USB_P3_6,
-	GPIO90_USB_P3_5,
-	GPIO91_USB_P3_1,
-	GPIO56_USB_P3_4,
-	GPIO113_USB_P3_3,
-};
-
-#if defined(CONFIG_MACH_EZX_A780) || defined(CONFIG_MACH_EZX_E680)
-static unsigned long gen1_pin_config[] __initdata = {
-	/* flip / lockswitch */
-	GPIO12_GPIO | WAKEUP_ON_EDGE_BOTH,
-
-	/* bluetooth (bcm2035) */
-	GPIO14_GPIO | WAKEUP_ON_EDGE_RISE,	/* HOSTWAKE */
-	GPIO48_GPIO,				/* RESET */
-	GPIO28_GPIO,				/* WAKEUP */
-
-	/* Neptune handshake */
-	GPIO0_GPIO | WAKEUP_ON_EDGE_FALL,	/* BP_RDY */
-	GPIO57_GPIO | MFP_LPM_DRIVE_HIGH,	/* AP_RDY */
-	GPIO13_GPIO | WAKEUP_ON_EDGE_BOTH,	/* WDI */
-	GPIO3_GPIO | WAKEUP_ON_EDGE_BOTH,	/* WDI2 */
-	GPIO82_GPIO | MFP_LPM_DRIVE_HIGH,	/* RESET */
-	GPIO99_GPIO | MFP_LPM_DRIVE_HIGH,	/* TC_MM_EN */
-
-	/* sound */
-	GPIO52_SSP3_SCLK,
-	GPIO83_SSP3_SFRM,
-	GPIO81_SSP3_TXD,
-	GPIO89_SSP3_RXD,
-
-	/* ssp2 pins to in */
-	GPIO22_GPIO,				/* SSP2_SCLK */
-	GPIO37_GPIO,				/* SSP2_SFRM */
-	GPIO38_GPIO,				/* SSP2_TXD */
-	GPIO88_GPIO,				/* SSP2_RXD */
-
-	/* camera */
-	GPIO23_CIF_MCLK,
-	GPIO54_CIF_PCLK,
-	GPIO85_CIF_LV,
-	GPIO84_CIF_FV,
-	GPIO27_CIF_DD_0,
-	GPIO114_CIF_DD_1,
-	GPIO51_CIF_DD_2,
-	GPIO115_CIF_DD_3,
-	GPIO95_CIF_DD_4,
-	GPIO94_CIF_DD_5,
-	GPIO17_CIF_DD_6,
-	GPIO108_CIF_DD_7,
-	GPIO50_GPIO | MFP_LPM_DRIVE_HIGH,	/* CAM_EN */
-	GPIO19_GPIO | MFP_LPM_DRIVE_HIGH,	/* CAM_RST */
-
-	/* EMU */
-	GPIO120_GPIO,				/* EMU_MUX1 */
-	GPIO119_GPIO,				/* EMU_MUX2 */
-	GPIO86_GPIO,				/* SNP_INT_CTL */
-	GPIO87_GPIO,				/* SNP_INT_IN */
-};
-#endif
-
-#if defined(CONFIG_MACH_EZX_A1200) || defined(CONFIG_MACH_EZX_A910) || \
-	defined(CONFIG_MACH_EZX_E2) || defined(CONFIG_MACH_EZX_E6)
-static unsigned long gen2_pin_config[] __initdata = {
-	/* flip / lockswitch */
-	GPIO15_GPIO | WAKEUP_ON_EDGE_BOTH,
-
-	/* EOC */
-	GPIO10_GPIO | WAKEUP_ON_EDGE_RISE,
-
-	/* bluetooth (bcm2045) */
-	GPIO13_GPIO | WAKEUP_ON_EDGE_RISE,	/* HOSTWAKE */
-	GPIO37_GPIO,				/* RESET */
-	GPIO57_GPIO,				/* WAKEUP */
-
-	/* Neptune handshake */
-	GPIO0_GPIO | WAKEUP_ON_EDGE_FALL,	/* BP_RDY */
-	GPIO96_GPIO | MFP_LPM_DRIVE_HIGH,	/* AP_RDY */
-	GPIO3_GPIO | WAKEUP_ON_EDGE_FALL,	/* WDI */
-	GPIO116_GPIO | MFP_LPM_DRIVE_HIGH,	/* RESET */
-	GPIO41_GPIO,				/* BP_FLASH */
-
-	/* sound */
-	GPIO52_SSP3_SCLK,
-	GPIO83_SSP3_SFRM,
-	GPIO81_SSP3_TXD,
-	GPIO82_SSP3_RXD,
-
-	/* ssp2 pins to in */
-	GPIO22_GPIO,				/* SSP2_SCLK */
-	GPIO14_GPIO,				/* SSP2_SFRM */
-	GPIO38_GPIO,				/* SSP2_TXD */
-	GPIO88_GPIO,				/* SSP2_RXD */
-
-	/* camera */
-	GPIO23_CIF_MCLK,
-	GPIO54_CIF_PCLK,
-	GPIO85_CIF_LV,
-	GPIO84_CIF_FV,
-	GPIO27_CIF_DD_0,
-	GPIO114_CIF_DD_1,
-	GPIO51_CIF_DD_2,
-	GPIO115_CIF_DD_3,
-	GPIO95_CIF_DD_4,
-	GPIO48_CIF_DD_5,
-	GPIO93_CIF_DD_6,
-	GPIO12_CIF_DD_7,
-	GPIO50_GPIO | MFP_LPM_DRIVE_HIGH,	/* CAM_EN */
-	GPIO28_GPIO | MFP_LPM_DRIVE_HIGH,	/* CAM_RST */
-	GPIO17_GPIO,				/* CAM_FLASH */
-};
-#endif
-
-#ifdef CONFIG_MACH_EZX_A780
-static unsigned long a780_pin_config[] __initdata = {
-	/* keypad */
-	GPIO93_KP_DKIN_0 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO98_KP_MKIN_4 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO103_KP_MKOUT_0,
-	GPIO104_KP_MKOUT_1,
-	GPIO105_KP_MKOUT_2,
-	GPIO106_KP_MKOUT_3,
-	GPIO107_KP_MKOUT_4,
-
-	/* attenuate sound */
-	GPIO96_GPIO,
-};
-#endif
-
-#ifdef CONFIG_MACH_EZX_E680
-static unsigned long e680_pin_config[] __initdata = {
-	/* keypad */
-	GPIO93_KP_DKIN_0 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO96_KP_DKIN_3 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO97_KP_DKIN_4 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO98_KP_DKIN_5 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO103_KP_MKOUT_0,
-	GPIO104_KP_MKOUT_1,
-	GPIO105_KP_MKOUT_2,
-	GPIO106_KP_MKOUT_3,
-
-	/* MIDI */
-	GPIO79_GPIO,				/* VA_SEL_BUL */
-	GPIO80_GPIO,				/* FLT_SEL_BUL */
-	GPIO78_GPIO,				/* MIDI_RESET */
-	GPIO33_GPIO,				/* MIDI_CS */
-	GPIO15_GPIO,				/* MIDI_IRQ */
-	GPIO49_GPIO,				/* MIDI_NPWE */
-	GPIO18_GPIO,				/* MIDI_RDY */
-
-	/* leds */
-	GPIO46_GPIO,
-	GPIO47_GPIO,
-};
-#endif
-
-#ifdef CONFIG_MACH_EZX_A1200
-static unsigned long a1200_pin_config[] __initdata = {
-	/* keypad */
-	GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO98_KP_MKIN_4 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO103_KP_MKOUT_0,
-	GPIO104_KP_MKOUT_1,
-	GPIO105_KP_MKOUT_2,
-	GPIO106_KP_MKOUT_3,
-	GPIO107_KP_MKOUT_4,
-	GPIO108_KP_MKOUT_5,
-};
-#endif
-
-#ifdef CONFIG_MACH_EZX_A910
-static unsigned long a910_pin_config[] __initdata = {
-	/* keypad */
-	GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO98_KP_MKIN_4 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO103_KP_MKOUT_0,
-	GPIO104_KP_MKOUT_1,
-	GPIO105_KP_MKOUT_2,
-	GPIO106_KP_MKOUT_3,
-	GPIO107_KP_MKOUT_4,
-	GPIO108_KP_MKOUT_5,
-
-	/* WLAN */
-	GPIO89_GPIO,				/* RESET */
-	GPIO33_GPIO,				/* WAKEUP */
-	GPIO94_GPIO | WAKEUP_ON_LEVEL_HIGH,	/* HOSTWAKE */
-
-	/* MMC CS */
-	GPIO20_GPIO,
-};
-#endif
-
-#ifdef CONFIG_MACH_EZX_E2
-static unsigned long e2_pin_config[] __initdata = {
-	/* keypad */
-	GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO98_KP_MKIN_4 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO103_KP_MKOUT_0,
-	GPIO104_KP_MKOUT_1,
-	GPIO105_KP_MKOUT_2,
-	GPIO106_KP_MKOUT_3,
-	GPIO107_KP_MKOUT_4,
-	GPIO108_KP_MKOUT_5,
-};
-#endif
-
-#ifdef CONFIG_MACH_EZX_E6
-static unsigned long e6_pin_config[] __initdata = {
-	/* keypad */
-	GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO98_KP_MKIN_4 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO103_KP_MKOUT_0,
-	GPIO104_KP_MKOUT_1,
-	GPIO105_KP_MKOUT_2,
-	GPIO106_KP_MKOUT_3,
-	GPIO107_KP_MKOUT_4,
-	GPIO108_KP_MKOUT_5,
-};
-#endif
-
-/* KEYPAD */
-#ifdef CONFIG_MACH_EZX_A780
-static unsigned int a780_key_map[] = {
-	KEY(0, 0, KEY_SEND),
-	KEY(0, 1, KEY_BACK),
-	KEY(0, 2, KEY_END),
-	KEY(0, 3, KEY_PAGEUP),
-	KEY(0, 4, KEY_UP),
-
-	KEY(1, 0, KEY_NUMERIC_1),
-	KEY(1, 1, KEY_NUMERIC_2),
-	KEY(1, 2, KEY_NUMERIC_3),
-	KEY(1, 3, KEY_SELECT),
-	KEY(1, 4, KEY_KPENTER),
-
-	KEY(2, 0, KEY_NUMERIC_4),
-	KEY(2, 1, KEY_NUMERIC_5),
-	KEY(2, 2, KEY_NUMERIC_6),
-	KEY(2, 3, KEY_RECORD),
-	KEY(2, 4, KEY_LEFT),
-
-	KEY(3, 0, KEY_NUMERIC_7),
-	KEY(3, 1, KEY_NUMERIC_8),
-	KEY(3, 2, KEY_NUMERIC_9),
-	KEY(3, 3, KEY_HOME),
-	KEY(3, 4, KEY_RIGHT),
-
-	KEY(4, 0, KEY_NUMERIC_STAR),
-	KEY(4, 1, KEY_NUMERIC_0),
-	KEY(4, 2, KEY_NUMERIC_POUND),
-	KEY(4, 3, KEY_PAGEDOWN),
-	KEY(4, 4, KEY_DOWN),
-};
-
-static struct pxa27x_keypad_platform_data a780_keypad_platform_data = {
-	.matrix_key_rows = 5,
-	.matrix_key_cols = 5,
-	.matrix_key_map = a780_key_map,
-	.matrix_key_map_size = ARRAY_SIZE(a780_key_map),
-
-	.direct_key_map = { KEY_CAMERA },
-	.direct_key_num = 1,
-
-	.debounce_interval = 30,
-};
-#endif /* CONFIG_MACH_EZX_A780 */
-
-#ifdef CONFIG_MACH_EZX_E680
-static unsigned int e680_key_map[] = {
-	KEY(0, 0, KEY_UP),
-	KEY(0, 1, KEY_RIGHT),
-	KEY(0, 2, KEY_RESERVED),
-	KEY(0, 3, KEY_SEND),
-
-	KEY(1, 0, KEY_DOWN),
-	KEY(1, 1, KEY_LEFT),
-	KEY(1, 2, KEY_PAGEUP),
-	KEY(1, 3, KEY_PAGEDOWN),
-
-	KEY(2, 0, KEY_RESERVED),
-	KEY(2, 1, KEY_RESERVED),
-	KEY(2, 2, KEY_RESERVED),
-	KEY(2, 3, KEY_KPENTER),
-};
-
-static struct pxa27x_keypad_platform_data e680_keypad_platform_data = {
-	.matrix_key_rows = 3,
-	.matrix_key_cols = 4,
-	.matrix_key_map = e680_key_map,
-	.matrix_key_map_size = ARRAY_SIZE(e680_key_map),
-
-	.direct_key_map = {
-		KEY_CAMERA,
-		KEY_RESERVED,
-		KEY_RESERVED,
-		KEY_F1,
-		KEY_CANCEL,
-		KEY_F2,
-	},
-	.direct_key_num = 6,
-
-	.debounce_interval = 30,
-};
-#endif /* CONFIG_MACH_EZX_E680 */
-
-#ifdef CONFIG_MACH_EZX_A1200
-static unsigned int a1200_key_map[] = {
-	KEY(0, 0, KEY_RESERVED),
-	KEY(0, 1, KEY_RIGHT),
-	KEY(0, 2, KEY_PAGEDOWN),
-	KEY(0, 3, KEY_RESERVED),
-	KEY(0, 4, KEY_RESERVED),
-	KEY(0, 5, KEY_RESERVED),
-
-	KEY(1, 0, KEY_RESERVED),
-	KEY(1, 1, KEY_DOWN),
-	KEY(1, 2, KEY_CAMERA),
-	KEY(1, 3, KEY_RESERVED),
-	KEY(1, 4, KEY_RESERVED),
-	KEY(1, 5, KEY_RESERVED),
-
-	KEY(2, 0, KEY_RESERVED),
-	KEY(2, 1, KEY_KPENTER),
-	KEY(2, 2, KEY_RECORD),
-	KEY(2, 3, KEY_RESERVED),
-	KEY(2, 4, KEY_RESERVED),
-	KEY(2, 5, KEY_SELECT),
-
-	KEY(3, 0, KEY_RESERVED),
-	KEY(3, 1, KEY_UP),
-	KEY(3, 2, KEY_SEND),
-	KEY(3, 3, KEY_RESERVED),
-	KEY(3, 4, KEY_RESERVED),
-	KEY(3, 5, KEY_RESERVED),
-
-	KEY(4, 0, KEY_RESERVED),
-	KEY(4, 1, KEY_LEFT),
-	KEY(4, 2, KEY_PAGEUP),
-	KEY(4, 3, KEY_RESERVED),
-	KEY(4, 4, KEY_RESERVED),
-	KEY(4, 5, KEY_RESERVED),
-};
-
-static struct pxa27x_keypad_platform_data a1200_keypad_platform_data = {
-	.matrix_key_rows = 5,
-	.matrix_key_cols = 6,
-	.matrix_key_map = a1200_key_map,
-	.matrix_key_map_size = ARRAY_SIZE(a1200_key_map),
-
-	.debounce_interval = 30,
-};
-#endif /* CONFIG_MACH_EZX_A1200 */
-
-#ifdef CONFIG_MACH_EZX_E6
-static unsigned int e6_key_map[] = {
-	KEY(0, 0, KEY_RESERVED),
-	KEY(0, 1, KEY_RIGHT),
-	KEY(0, 2, KEY_PAGEDOWN),
-	KEY(0, 3, KEY_RESERVED),
-	KEY(0, 4, KEY_RESERVED),
-	KEY(0, 5, KEY_NEXTSONG),
-
-	KEY(1, 0, KEY_RESERVED),
-	KEY(1, 1, KEY_DOWN),
-	KEY(1, 2, KEY_PROG1),
-	KEY(1, 3, KEY_RESERVED),
-	KEY(1, 4, KEY_RESERVED),
-	KEY(1, 5, KEY_RESERVED),
-
-	KEY(2, 0, KEY_RESERVED),
-	KEY(2, 1, KEY_ENTER),
-	KEY(2, 2, KEY_CAMERA),
-	KEY(2, 3, KEY_RESERVED),
-	KEY(2, 4, KEY_RESERVED),
-	KEY(2, 5, KEY_WWW),
-
-	KEY(3, 0, KEY_RESERVED),
-	KEY(3, 1, KEY_UP),
-	KEY(3, 2, KEY_SEND),
-	KEY(3, 3, KEY_RESERVED),
-	KEY(3, 4, KEY_RESERVED),
-	KEY(3, 5, KEY_PLAYPAUSE),
-
-	KEY(4, 0, KEY_RESERVED),
-	KEY(4, 1, KEY_LEFT),
-	KEY(4, 2, KEY_PAGEUP),
-	KEY(4, 3, KEY_RESERVED),
-	KEY(4, 4, KEY_RESERVED),
-	KEY(4, 5, KEY_PREVIOUSSONG),
-};
-
-static struct pxa27x_keypad_platform_data e6_keypad_platform_data = {
-	.matrix_key_rows = 5,
-	.matrix_key_cols = 6,
-	.matrix_key_map = e6_key_map,
-	.matrix_key_map_size = ARRAY_SIZE(e6_key_map),
-
-	.debounce_interval = 30,
-};
-#endif /* CONFIG_MACH_EZX_E6 */
-
-#ifdef CONFIG_MACH_EZX_A910
-static unsigned int a910_key_map[] = {
-	KEY(0, 0, KEY_NUMERIC_6),
-	KEY(0, 1, KEY_RIGHT),
-	KEY(0, 2, KEY_PAGEDOWN),
-	KEY(0, 3, KEY_KPENTER),
-	KEY(0, 4, KEY_NUMERIC_5),
-	KEY(0, 5, KEY_CAMERA),
-
-	KEY(1, 0, KEY_NUMERIC_8),
-	KEY(1, 1, KEY_DOWN),
-	KEY(1, 2, KEY_RESERVED),
-	KEY(1, 3, KEY_F1), /* Left SoftKey */
-	KEY(1, 4, KEY_NUMERIC_STAR),
-	KEY(1, 5, KEY_RESERVED),
-
-	KEY(2, 0, KEY_NUMERIC_7),
-	KEY(2, 1, KEY_NUMERIC_9),
-	KEY(2, 2, KEY_RECORD),
-	KEY(2, 3, KEY_F2), /* Right SoftKey */
-	KEY(2, 4, KEY_BACK),
-	KEY(2, 5, KEY_SELECT),
-
-	KEY(3, 0, KEY_NUMERIC_2),
-	KEY(3, 1, KEY_UP),
-	KEY(3, 2, KEY_SEND),
-	KEY(3, 3, KEY_NUMERIC_0),
-	KEY(3, 4, KEY_NUMERIC_1),
-	KEY(3, 5, KEY_RECORD),
-
-	KEY(4, 0, KEY_NUMERIC_4),
-	KEY(4, 1, KEY_LEFT),
-	KEY(4, 2, KEY_PAGEUP),
-	KEY(4, 3, KEY_NUMERIC_POUND),
-	KEY(4, 4, KEY_NUMERIC_3),
-	KEY(4, 5, KEY_RESERVED),
-};
-
-static struct pxa27x_keypad_platform_data a910_keypad_platform_data = {
-	.matrix_key_rows = 5,
-	.matrix_key_cols = 6,
-	.matrix_key_map = a910_key_map,
-	.matrix_key_map_size = ARRAY_SIZE(a910_key_map),
-
-	.debounce_interval = 30,
-};
-#endif /* CONFIG_MACH_EZX_A910 */
-
-#ifdef CONFIG_MACH_EZX_E2
-static unsigned int e2_key_map[] = {
-	KEY(0, 0, KEY_NUMERIC_6),
-	KEY(0, 1, KEY_RIGHT),
-	KEY(0, 2, KEY_NUMERIC_9),
-	KEY(0, 3, KEY_NEXTSONG),
-	KEY(0, 4, KEY_NUMERIC_5),
-	KEY(0, 5, KEY_F1), /* Left SoftKey */
-
-	KEY(1, 0, KEY_NUMERIC_8),
-	KEY(1, 1, KEY_DOWN),
-	KEY(1, 2, KEY_RESERVED),
-	KEY(1, 3, KEY_PAGEUP),
-	KEY(1, 4, KEY_NUMERIC_STAR),
-	KEY(1, 5, KEY_F2), /* Right SoftKey */
-
-	KEY(2, 0, KEY_NUMERIC_7),
-	KEY(2, 1, KEY_KPENTER),
-	KEY(2, 2, KEY_RECORD),
-	KEY(2, 3, KEY_PAGEDOWN),
-	KEY(2, 4, KEY_BACK),
-	KEY(2, 5, KEY_NUMERIC_0),
-
-	KEY(3, 0, KEY_NUMERIC_2),
-	KEY(3, 1, KEY_UP),
-	KEY(3, 2, KEY_SEND),
-	KEY(3, 3, KEY_PLAYPAUSE),
-	KEY(3, 4, KEY_NUMERIC_1),
-	KEY(3, 5, KEY_SOUND), /* Music SoftKey */
-
-	KEY(4, 0, KEY_NUMERIC_4),
-	KEY(4, 1, KEY_LEFT),
-	KEY(4, 2, KEY_NUMERIC_POUND),
-	KEY(4, 3, KEY_PREVIOUSSONG),
-	KEY(4, 4, KEY_NUMERIC_3),
-	KEY(4, 5, KEY_RESERVED),
-};
-
-static struct pxa27x_keypad_platform_data e2_keypad_platform_data = {
-	.matrix_key_rows = 5,
-	.matrix_key_cols = 6,
-	.matrix_key_map = e2_key_map,
-	.matrix_key_map_size = ARRAY_SIZE(e2_key_map),
-
-	.debounce_interval = 30,
-};
-#endif /* CONFIG_MACH_EZX_E2 */
-
-#ifdef CONFIG_MACH_EZX_A780
-/* gpio_keys */
-static struct gpio_keys_button a780_buttons[] = {
-	[0] = {
-		.code       = SW_LID,
-		.gpio       = GPIO12_A780_FLIP_LID,
-		.active_low = 0,
-		.desc       = "A780 flip lid",
-		.type       = EV_SW,
-		.wakeup     = 1,
-	},
-};
-
-static struct gpio_keys_platform_data a780_gpio_keys_platform_data = {
-	.buttons  = a780_buttons,
-	.nbuttons = ARRAY_SIZE(a780_buttons),
-};
-
-static struct platform_device a780_gpio_keys = {
-	.name = "gpio-keys",
-	.id   = -1,
-	.dev  = {
-		.platform_data = &a780_gpio_keys_platform_data,
-	},
-};
-
-/* camera */
-static int a780_camera_init(void)
-{
-	int err;
-
-	/*
-	 * GPIO50_nCAM_EN is active low
-	 * GPIO19_GEN1_CAM_RST is active on rising edge
-	 */
-	err = gpio_request(GPIO50_nCAM_EN, "nCAM_EN");
-	if (err) {
-		pr_err("%s: Failed to request nCAM_EN\n", __func__);
-		goto fail;
-	}
-
-	err = gpio_request(GPIO19_GEN1_CAM_RST, "CAM_RST");
-	if (err) {
-		pr_err("%s: Failed to request CAM_RST\n", __func__);
-		goto fail_gpio_cam_rst;
-	}
-
-	gpio_direction_output(GPIO50_nCAM_EN, 1);
-	gpio_direction_output(GPIO19_GEN1_CAM_RST, 0);
-
-	return 0;
-
-fail_gpio_cam_rst:
-	gpio_free(GPIO50_nCAM_EN);
-fail:
-	return err;
-}
-
-static int a780_camera_power(struct device *dev, int on)
-{
-	gpio_set_value(GPIO50_nCAM_EN, !on);
-	return 0;
-}
-
-static int a780_camera_reset(struct device *dev)
-{
-	gpio_set_value(GPIO19_GEN1_CAM_RST, 0);
-	msleep(10);
-	gpio_set_value(GPIO19_GEN1_CAM_RST, 1);
-
-	return 0;
-}
-
-struct pxacamera_platform_data a780_pxacamera_platform_data = {
-	.flags  = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 |
-		PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN,
-	.mclk_10khz = 5000,
-};
-
-static struct i2c_board_info a780_camera_i2c_board_info = {
-	I2C_BOARD_INFO("mt9m111", 0x5d),
-};
-
-static struct soc_camera_link a780_iclink = {
-	.bus_id         = 0,
-	.flags          = SOCAM_SENSOR_INVERT_PCLK,
-	.i2c_adapter_id = 0,
-	.board_info     = &a780_camera_i2c_board_info,
-	.power          = a780_camera_power,
-	.reset          = a780_camera_reset,
-};
-
-static struct platform_device a780_camera = {
-	.name   = "soc-camera-pdrv",
-	.id     = 0,
-	.dev    = {
-		.platform_data = &a780_iclink,
-	},
-};
-
-static struct platform_device *a780_devices[] __initdata = {
-	&a780_gpio_keys,
-};
-
-static void __init a780_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(gen1_pin_config));
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(a780_pin_config));
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	pxa_set_i2c_info(NULL);
-
-	pxa_set_fb_info(NULL, &ezx_fb_info_1);
-
-	pxa_set_keypad_info(&a780_keypad_platform_data);
-
-	if (a780_camera_init() == 0) {
-		pxa_set_camera_info(&a780_pxacamera_platform_data);
-		platform_device_register(&a780_camera);
-	}
-
-	platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
-	platform_add_devices(ARRAY_AND_SIZE(a780_devices));
-}
-
-MACHINE_START(EZX_A780, "Motorola EZX A780")
-	.atag_offset    = 0x100,
-	.map_io         = pxa27x_map_io,
-	.nr_irqs	= EZX_NR_IRQS,
-	.init_irq       = pxa27x_init_irq,
-	.handle_irq       = pxa27x_handle_irq,
-	.timer          = &pxa_timer,
-	.init_machine   = a780_init,
-	.restart	= pxa_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_EZX_E680
-/* gpio_keys */
-static struct gpio_keys_button e680_buttons[] = {
-	[0] = {
-		.code       = KEY_SCREENLOCK,
-		.gpio       = GPIO12_E680_LOCK_SWITCH,
-		.active_low = 0,
-		.desc       = "E680 lock switch",
-		.type       = EV_KEY,
-		.wakeup     = 1,
-	},
-};
-
-static struct gpio_keys_platform_data e680_gpio_keys_platform_data = {
-	.buttons  = e680_buttons,
-	.nbuttons = ARRAY_SIZE(e680_buttons),
-};
-
-static struct platform_device e680_gpio_keys = {
-	.name = "gpio-keys",
-	.id   = -1,
-	.dev  = {
-		.platform_data = &e680_gpio_keys_platform_data,
-	},
-};
-
-static struct i2c_board_info __initdata e680_i2c_board_info[] = {
-	{ I2C_BOARD_INFO("tea5767", 0x81) },
-};
-
-static struct platform_device *e680_devices[] __initdata = {
-	&e680_gpio_keys,
-};
-
-static void __init e680_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(gen1_pin_config));
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(e680_pin_config));
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	pxa_set_i2c_info(NULL);
-	i2c_register_board_info(0, ARRAY_AND_SIZE(e680_i2c_board_info));
-
-	pxa_set_fb_info(NULL, &ezx_fb_info_1);
-
-	pxa_set_keypad_info(&e680_keypad_platform_data);
-
-	platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
-	platform_add_devices(ARRAY_AND_SIZE(e680_devices));
-}
-
-MACHINE_START(EZX_E680, "Motorola EZX E680")
-	.atag_offset    = 0x100,
-	.map_io         = pxa27x_map_io,
-	.nr_irqs	= EZX_NR_IRQS,
-	.init_irq       = pxa27x_init_irq,
-	.handle_irq       = pxa27x_handle_irq,
-	.timer          = &pxa_timer,
-	.init_machine   = e680_init,
-	.restart	= pxa_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_EZX_A1200
-/* gpio_keys */
-static struct gpio_keys_button a1200_buttons[] = {
-	[0] = {
-		.code       = SW_LID,
-		.gpio       = GPIO15_A1200_FLIP_LID,
-		.active_low = 0,
-		.desc       = "A1200 flip lid",
-		.type       = EV_SW,
-		.wakeup     = 1,
-	},
-};
-
-static struct gpio_keys_platform_data a1200_gpio_keys_platform_data = {
-	.buttons  = a1200_buttons,
-	.nbuttons = ARRAY_SIZE(a1200_buttons),
-};
-
-static struct platform_device a1200_gpio_keys = {
-	.name = "gpio-keys",
-	.id   = -1,
-	.dev  = {
-		.platform_data = &a1200_gpio_keys_platform_data,
-	},
-};
-
-static struct i2c_board_info __initdata a1200_i2c_board_info[] = {
-	{ I2C_BOARD_INFO("tea5767", 0x81) },
-};
-
-static struct platform_device *a1200_devices[] __initdata = {
-	&a1200_gpio_keys,
-};
-
-static void __init a1200_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(gen2_pin_config));
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(a1200_pin_config));
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	pxa_set_i2c_info(NULL);
-	i2c_register_board_info(0, ARRAY_AND_SIZE(a1200_i2c_board_info));
-
-	pxa_set_fb_info(NULL, &ezx_fb_info_2);
-
-	pxa_set_keypad_info(&a1200_keypad_platform_data);
-
-	platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
-	platform_add_devices(ARRAY_AND_SIZE(a1200_devices));
-}
-
-MACHINE_START(EZX_A1200, "Motorola EZX A1200")
-	.atag_offset    = 0x100,
-	.map_io         = pxa27x_map_io,
-	.nr_irqs	= EZX_NR_IRQS,
-	.init_irq       = pxa27x_init_irq,
-	.handle_irq       = pxa27x_handle_irq,
-	.timer          = &pxa_timer,
-	.init_machine   = a1200_init,
-	.restart	= pxa_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_EZX_A910
-/* gpio_keys */
-static struct gpio_keys_button a910_buttons[] = {
-	[0] = {
-		.code       = SW_LID,
-		.gpio       = GPIO15_A910_FLIP_LID,
-		.active_low = 0,
-		.desc       = "A910 flip lid",
-		.type       = EV_SW,
-		.wakeup     = 1,
-	},
-};
-
-static struct gpio_keys_platform_data a910_gpio_keys_platform_data = {
-	.buttons  = a910_buttons,
-	.nbuttons = ARRAY_SIZE(a910_buttons),
-};
-
-static struct platform_device a910_gpio_keys = {
-	.name = "gpio-keys",
-	.id   = -1,
-	.dev  = {
-		.platform_data = &a910_gpio_keys_platform_data,
-	},
-};
-
-/* camera */
-static int a910_camera_init(void)
-{
-	int err;
-
-	/*
-	 * GPIO50_nCAM_EN is active low
-	 * GPIO28_GEN2_CAM_RST is active on rising edge
-	 */
-	err = gpio_request(GPIO50_nCAM_EN, "nCAM_EN");
-	if (err) {
-		pr_err("%s: Failed to request nCAM_EN\n", __func__);
-		goto fail;
-	}
-
-	err = gpio_request(GPIO28_GEN2_CAM_RST, "CAM_RST");
-	if (err) {
-		pr_err("%s: Failed to request CAM_RST\n", __func__);
-		goto fail_gpio_cam_rst;
-	}
-
-	gpio_direction_output(GPIO50_nCAM_EN, 1);
-	gpio_direction_output(GPIO28_GEN2_CAM_RST, 0);
-
-	return 0;
-
-fail_gpio_cam_rst:
-	gpio_free(GPIO50_nCAM_EN);
-fail:
-	return err;
-}
-
-static int a910_camera_power(struct device *dev, int on)
-{
-	gpio_set_value(GPIO50_nCAM_EN, !on);
-	return 0;
-}
-
-static int a910_camera_reset(struct device *dev)
-{
-	gpio_set_value(GPIO28_GEN2_CAM_RST, 0);
-	msleep(10);
-	gpio_set_value(GPIO28_GEN2_CAM_RST, 1);
-
-	return 0;
-}
-
-struct pxacamera_platform_data a910_pxacamera_platform_data = {
-	.flags  = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 |
-		PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN,
-	.mclk_10khz = 5000,
-};
-
-static struct i2c_board_info a910_camera_i2c_board_info = {
-	I2C_BOARD_INFO("mt9m111", 0x5d),
-};
-
-static struct soc_camera_link a910_iclink = {
-	.bus_id         = 0,
-	.i2c_adapter_id = 0,
-	.board_info     = &a910_camera_i2c_board_info,
-	.power          = a910_camera_power,
-	.reset          = a910_camera_reset,
-};
-
-static struct platform_device a910_camera = {
-	.name   = "soc-camera-pdrv",
-	.id     = 0,
-	.dev    = {
-		.platform_data = &a910_iclink,
-	},
-};
-
-/* leds-lp3944 */
-static struct lp3944_platform_data a910_lp3944_leds = {
-	.leds_size = LP3944_LEDS_MAX,
-	.leds = {
-		[0] = {
-			.name = "a910:red:",
-			.status = LP3944_LED_STATUS_OFF,
-			.type = LP3944_LED_TYPE_LED,
-		},
-		[1] = {
-			.name = "a910:green:",
-			.status = LP3944_LED_STATUS_OFF,
-			.type = LP3944_LED_TYPE_LED,
-		},
-		[2] {
-			.name = "a910:blue:",
-			.status = LP3944_LED_STATUS_OFF,
-			.type = LP3944_LED_TYPE_LED,
-		},
-		/* Leds 3 and 4 are used as display power switches */
-		[3] = {
-			.name = "a910::cli_display",
-			.status = LP3944_LED_STATUS_OFF,
-			.type = LP3944_LED_TYPE_LED_INVERTED
-		},
-		[4] = {
-			.name = "a910::main_display",
-			.status = LP3944_LED_STATUS_ON,
-			.type = LP3944_LED_TYPE_LED_INVERTED
-		},
-		[5] = { .type = LP3944_LED_TYPE_NONE },
-		[6] = {
-			.name = "a910::torch",
-			.status = LP3944_LED_STATUS_OFF,
-			.type = LP3944_LED_TYPE_LED,
-		},
-		[7] = {
-			.name = "a910::flash",
-			.status = LP3944_LED_STATUS_OFF,
-			.type = LP3944_LED_TYPE_LED_INVERTED,
-		},
-	},
-};
-
-static struct i2c_board_info __initdata a910_i2c_board_info[] = {
-	{
-		I2C_BOARD_INFO("lp3944", 0x60),
-		.platform_data = &a910_lp3944_leds,
-	},
-};
-
-static struct platform_device *a910_devices[] __initdata = {
-	&a910_gpio_keys,
-};
-
-static void __init a910_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(gen2_pin_config));
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(a910_pin_config));
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	pxa_set_i2c_info(NULL);
-	i2c_register_board_info(0, ARRAY_AND_SIZE(a910_i2c_board_info));
-
-	pxa_set_fb_info(NULL, &ezx_fb_info_2);
-
-	pxa_set_keypad_info(&a910_keypad_platform_data);
-
-	if (a910_camera_init() == 0) {
-		pxa_set_camera_info(&a910_pxacamera_platform_data);
-		platform_device_register(&a910_camera);
-	}
-
-	platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
-	platform_add_devices(ARRAY_AND_SIZE(a910_devices));
-}
-
-MACHINE_START(EZX_A910, "Motorola EZX A910")
-	.atag_offset    = 0x100,
-	.map_io         = pxa27x_map_io,
-	.nr_irqs	= EZX_NR_IRQS,
-	.init_irq       = pxa27x_init_irq,
-	.handle_irq       = pxa27x_handle_irq,
-	.timer          = &pxa_timer,
-	.init_machine   = a910_init,
-	.restart	= pxa_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_EZX_E6
-/* gpio_keys */
-static struct gpio_keys_button e6_buttons[] = {
-	[0] = {
-		.code       = KEY_SCREENLOCK,
-		.gpio       = GPIO15_E6_LOCK_SWITCH,
-		.active_low = 0,
-		.desc       = "E6 lock switch",
-		.type       = EV_KEY,
-		.wakeup     = 1,
-	},
-};
-
-static struct gpio_keys_platform_data e6_gpio_keys_platform_data = {
-	.buttons  = e6_buttons,
-	.nbuttons = ARRAY_SIZE(e6_buttons),
-};
-
-static struct platform_device e6_gpio_keys = {
-	.name = "gpio-keys",
-	.id   = -1,
-	.dev  = {
-		.platform_data = &e6_gpio_keys_platform_data,
-	},
-};
-
-static struct i2c_board_info __initdata e6_i2c_board_info[] = {
-	{ I2C_BOARD_INFO("tea5767", 0x81) },
-};
-
-static struct platform_device *e6_devices[] __initdata = {
-	&e6_gpio_keys,
-};
-
-static void __init e6_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(gen2_pin_config));
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(e6_pin_config));
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	pxa_set_i2c_info(NULL);
-	i2c_register_board_info(0, ARRAY_AND_SIZE(e6_i2c_board_info));
-
-	pxa_set_fb_info(NULL, &ezx_fb_info_2);
-
-	pxa_set_keypad_info(&e6_keypad_platform_data);
-
-	platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
-	platform_add_devices(ARRAY_AND_SIZE(e6_devices));
-}
-
-MACHINE_START(EZX_E6, "Motorola EZX E6")
-	.atag_offset    = 0x100,
-	.map_io         = pxa27x_map_io,
-	.nr_irqs	= EZX_NR_IRQS,
-	.init_irq       = pxa27x_init_irq,
-	.handle_irq       = pxa27x_handle_irq,
-	.timer          = &pxa_timer,
-	.init_machine   = e6_init,
-	.restart	= pxa_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_EZX_E2
-static struct i2c_board_info __initdata e2_i2c_board_info[] = {
-	{ I2C_BOARD_INFO("tea5767", 0x81) },
-};
-
-static struct platform_device *e2_devices[] __initdata = {
-};
-
-static void __init e2_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(gen2_pin_config));
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(e2_pin_config));
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	pxa_set_i2c_info(NULL);
-	i2c_register_board_info(0, ARRAY_AND_SIZE(e2_i2c_board_info));
-
-	pxa_set_fb_info(NULL, &ezx_fb_info_2);
-
-	pxa_set_keypad_info(&e2_keypad_platform_data);
-
-	platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
-	platform_add_devices(ARRAY_AND_SIZE(e2_devices));
-}
-
-MACHINE_START(EZX_E2, "Motorola EZX E2")
-	.atag_offset    = 0x100,
-	.map_io         = pxa27x_map_io,
-	.nr_irqs	= EZX_NR_IRQS,
-	.init_irq       = pxa27x_init_irq,
-	.handle_irq       = pxa27x_handle_irq,
-	.timer          = &pxa_timer,
-	.init_machine   = e2_init,
-	.restart	= pxa_restart,
-MACHINE_END
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/generic.c b/ANDROID_3.4.5/arch/arm/mach-pxa/generic.c
deleted file mode 100644
index 42254175..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/generic.c
+++ /dev/null
@@ -1,97 +0,0 @@
-/*
- *  linux/arch/arm/mach-pxa/generic.c
- *
- *  Author:	Nicolas Pitre
- *  Created:	Jun 15, 2001
- *  Copyright:	MontaVista Software Inc.
- *
- * Code common to all PXA machines.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Since this file should be linked before any other machine specific file,
- * the __initcall() here will be executed first.  This serves as default
- * initialization stuff for PXA machines which can be overridden later if
- * need be.
- */
-#include <linux/gpio.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-#include <mach/hardware.h>
-#include <asm/mach/map.h>
-#include <asm/mach-types.h>
-
-#include <mach/reset.h>
-#include <mach/smemc.h>
-#include <mach/pxa3xx-regs.h>
-
-#include "generic.h"
-
-void clear_reset_status(unsigned int mask)
-{
-	if (cpu_is_pxa2xx())
-		pxa2xx_clear_reset_status(mask);
-	else {
-		/* RESET_STATUS_* has a 1:1 mapping with ARSR */
-		ARSR = mask;
-	}
-}
-
-unsigned long get_clock_tick_rate(void)
-{
-	unsigned long clock_tick_rate;
-
-	if (cpu_is_pxa25x())
-		clock_tick_rate = 3686400;
-	else if (machine_is_mainstone())
-		clock_tick_rate = 3249600;
-	else
-		clock_tick_rate = 3250000;
-
-	return clock_tick_rate;
-}
-EXPORT_SYMBOL(get_clock_tick_rate);
-
-/*
- * Get the clock frequency as reflected by CCCR and the turbo flag.
- * We assume these values have been applied via a fcs.
- * If info is not 0 we also display the current settings.
- */
-unsigned int get_clk_frequency_khz(int info)
-{
-	if (cpu_is_pxa25x())
-		return pxa25x_get_clk_frequency_khz(info);
-	else if (cpu_is_pxa27x())
-		return pxa27x_get_clk_frequency_khz(info);
-	return 0;
-}
-EXPORT_SYMBOL(get_clk_frequency_khz);
-
-/*
- * Intel PXA2xx internal register mapping.
- *
- * Note: virtual 0xfffe0000-0xffffffff is reserved for the vector table
- *       and cache flush area.
- */
-static struct map_desc common_io_desc[] __initdata = {
-  	{	/* Devs */
-		.virtual	=  0xf2000000,
-		.pfn		= __phys_to_pfn(0x40000000),
-		.length		= 0x02000000,
-		.type		= MT_DEVICE
-	}, {	/* UNCACHED_PHYS_0 */
-		.virtual	= 0xff000000,
-		.pfn		= __phys_to_pfn(0x00000000),
-		.length		= 0x00100000,
-		.type		= MT_DEVICE
-	}
-};
-
-void __init pxa_map_io(void)
-{
-	iotable_init(ARRAY_AND_SIZE(common_io_desc));
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/generic.h b/ANDROID_3.4.5/arch/arm/mach-pxa/generic.h
deleted file mode 100644
index 42d5cca6..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/generic.h
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- *  linux/arch/arm/mach-pxa/generic.h
- *
- * Author:	Nicolas Pitre
- * Copyright:	MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-struct irq_data;
-struct sys_timer;
-
-extern struct sys_timer pxa_timer;
-
-extern void __init pxa_map_io(void);
-
-extern unsigned int get_clk_frequency_khz(int info);
-
-#define SET_BANK(__nr,__start,__size) \
-	mi->bank[__nr].start = (__start), \
-	mi->bank[__nr].size = (__size)
-
-#define ARRAY_AND_SIZE(x)	(x), ARRAY_SIZE(x)
-
-#ifdef CONFIG_PXA25x
-extern unsigned pxa25x_get_clk_frequency_khz(int);
-#else
-#define pxa25x_get_clk_frequency_khz(x)		(0)
-#endif
-
-#ifdef CONFIG_PXA27x
-extern unsigned pxa27x_get_clk_frequency_khz(int);
-#else
-#define pxa27x_get_clk_frequency_khz(x)		(0)
-#endif
-
-#if defined(CONFIG_PXA25x) || defined(CONFIG_PXA27x)
-extern void pxa2xx_clear_reset_status(unsigned int);
-#else
-static inline void pxa2xx_clear_reset_status(unsigned int mask) {}
-#endif
-
-#ifdef CONFIG_PXA3xx
-extern unsigned pxa3xx_get_clk_frequency_khz(int);
-#else
-#define pxa3xx_get_clk_frequency_khz(x)		(0)
-#endif
-
-extern struct syscore_ops pxa_irq_syscore_ops;
-extern struct syscore_ops pxa2xx_mfp_syscore_ops;
-extern struct syscore_ops pxa3xx_mfp_syscore_ops;
-
-void __init pxa_set_ffuart_info(void *info);
-void __init pxa_set_btuart_info(void *info);
-void __init pxa_set_stuart_info(void *info);
-void __init pxa_set_hwuart_info(void *info);
-
-void pxa_restart(char, const char *);
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/gumstix.c b/ANDROID_3.4.5/arch/arm/mach-pxa/gumstix.c
deleted file mode 100644
index e529a35a..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/gumstix.c
+++ /dev/null
@@ -1,244 +0,0 @@
-/*
- *  linux/arch/arm/mach-pxa/gumstix.c
- *
- *  Support for the Gumstix motherboards.
- *
- *  Original Author:	Craig Hughes
- *  Created:	Feb 14, 2008
- *  Copyright:	Craig Hughes
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- *
- *  Implemented based on lubbock.c by Nicolas Pitre and code from Craig
- *  Hughes
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/delay.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/gpio.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/usb/gpio_vbus.h>
-
-#include <asm/setup.h>
-#include <asm/memory.h>
-#include <asm/mach-types.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/sizes.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/flash.h>
-
-#include <mach/pxa25x.h>
-#include <mach/mmc.h>
-#include <mach/udc.h>
-#include <mach/gumstix.h>
-
-#include "generic.h"
-
-static struct resource flash_resource = {
-	.start	= 0x00000000,
-	.end	= SZ_64M - 1,
-	.flags	= IORESOURCE_MEM,
-};
-
-static struct mtd_partition gumstix_partitions[] = {
-	{
-		.name =		"Bootloader",
-		.size =		0x00040000,
-		.offset =	0,
-		.mask_flags =	MTD_WRITEABLE  /* force read-only */
-	} , {
-		.name =		"rootfs",
-		.size =		MTDPART_SIZ_FULL,
-		.offset =	MTDPART_OFS_APPEND
-	}
-};
-
-static struct flash_platform_data gumstix_flash_data = {
-	.map_name	= "cfi_probe",
-	.parts		= gumstix_partitions,
-	.nr_parts	= ARRAY_SIZE(gumstix_partitions),
-	.width		= 2,
-};
-
-static struct platform_device gumstix_flash_device = {
-	.name		= "pxa2xx-flash",
-	.id		= 0,
-	.dev = {
-		.platform_data = &gumstix_flash_data,
-	},
-	.resource = &flash_resource,
-	.num_resources = 1,
-};
-
-static struct platform_device *devices[] __initdata = {
-	&gumstix_flash_device,
-};
-
-#ifdef CONFIG_MMC_PXA
-static struct pxamci_platform_data gumstix_mci_platform_data = {
-	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
-	.gpio_card_detect 	= -1,
-	.gpio_card_ro		= -1,
-	.gpio_power		= -1,
-};
-
-static void __init gumstix_mmc_init(void)
-{
-	pxa_set_mci_info(&gumstix_mci_platform_data);
-}
-#else
-static void __init gumstix_mmc_init(void)
-{
-	pr_debug("Gumstix mmc disabled\n");
-}
-#endif
-
-#ifdef CONFIG_USB_PXA25X
-static struct gpio_vbus_mach_info gumstix_udc_info = {
-	.gpio_vbus		= GPIO_GUMSTIX_USB_GPIOn,
-	.gpio_pullup		= GPIO_GUMSTIX_USB_GPIOx,
-};
-
-static struct platform_device gumstix_gpio_vbus = {
-	.name	= "gpio-vbus",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &gumstix_udc_info,
-	},
-};
-
-static void __init gumstix_udc_init(void)
-{
-	platform_device_register(&gumstix_gpio_vbus);
-}
-#else
-static void gumstix_udc_init(void)
-{
-	pr_debug("Gumstix udc is disabled\n");
-}
-#endif
-
-#ifdef CONFIG_BT
-/* Normally, the bootloader would have enabled this 32kHz clock but many
-** boards still have u-boot 1.1.4 so we check if it has been turned on and
-** if not, we turn it on with a warning message. */
-static void gumstix_setup_bt_clock(void)
-{
-	int timeout = 500;
-
-	if (!(OSCC & OSCC_OOK))
-		pr_warning("32kHz clock was not on. Bootloader may need to "
-				"be updated\n");
-	else
-		return;
-
-	OSCC |= OSCC_OON;
-	do {
-		if (OSCC & OSCC_OOK)
-			break;
-		udelay(1);
-	} while (--timeout);
-	if (!timeout)
-		pr_err("Failed to start 32kHz clock\n");
-}
-
-static void __init gumstix_bluetooth_init(void)
-{
-	int err;
-
-	gumstix_setup_bt_clock();
-
-	err = gpio_request(GPIO_GUMSTIX_BTRESET, "BTRST");
-	if (err) {
-		pr_err("gumstix: failed request gpio for bluetooth reset\n");
-		return;
-	}
-
-	err = gpio_direction_output(GPIO_GUMSTIX_BTRESET, 1);
-	if (err) {
-		pr_err("gumstix: can't reset bluetooth\n");
-		return;
-	}
-	gpio_set_value(GPIO_GUMSTIX_BTRESET, 0);
-	udelay(100);
-	gpio_set_value(GPIO_GUMSTIX_BTRESET, 1);
-}
-#else
-static void gumstix_bluetooth_init(void)
-{
-	pr_debug("Gumstix Bluetooth is disabled\n");
-}
-#endif
-
-static unsigned long gumstix_pin_config[] __initdata = {
-	GPIO12_32KHz,
-	/* BTUART */
-	GPIO42_HWUART_RXD,
-	GPIO43_HWUART_TXD,
-	GPIO44_HWUART_CTS,
-	GPIO45_HWUART_RTS,
-	/* MMC */
-	GPIO6_MMC_CLK,
-	GPIO53_MMC_CLK,
-	GPIO8_MMC_CS0,
-};
-
-int __attribute__((weak)) am200_init(void)
-{
-	return 0;
-}
-
-int __attribute__((weak)) am300_init(void)
-{
-	return 0;
-}
-
-static void __init carrier_board_init(void)
-{
-	/*
-	 * put carrier/expansion board init here if
-	 * they cannot be detected programatically
-	 */
-	am200_init();
-	am300_init();
-}
-
-static void __init gumstix_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(gumstix_pin_config));
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-	pxa_set_hwuart_info(NULL);
-
-	gumstix_bluetooth_init();
-	gumstix_udc_init();
-	gumstix_mmc_init();
-	(void) platform_add_devices(devices, ARRAY_SIZE(devices));
-	carrier_board_init();
-}
-
-MACHINE_START(GUMSTIX, "Gumstix")
-	.atag_offset	= 0x100, /* match u-boot bi_boot_params */
-	.map_io		= pxa25x_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa25x_init_irq,
-	.handle_irq	= pxa25x_handle_irq,
-	.timer		= &pxa_timer,
-	.init_machine	= gumstix_init,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/h5000.c b/ANDROID_3.4.5/arch/arm/mach-pxa/h5000.c
deleted file mode 100644
index e7dec589..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/h5000.c
+++ /dev/null
@@ -1,214 +0,0 @@
-/*
- * Hardware definitions for HP iPAQ h5xxx Handheld Computers
- *
- * Copyright 2000-2003  Hewlett-Packard Company.
- * Copyright 2002       Jamey Hicks <jamey.hicks@hp.com>
- * Copyright 2004-2005  Phil Blundell <pb@handhelds.org>
- * Copyright 2007-2008  Anton Vorontsov <cbouatmailru@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * COMPAQ COMPUTER CORPORATION MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
- * AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS
- * FITNESS FOR ANY PARTICULAR PURPOSE.
- *
- * Author: Jamey Hicks.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/irq.h>
-
-#include <mach/pxa25x.h>
-#include <mach/h5000.h>
-#include <mach/udc.h>
-#include <mach/smemc.h>
-
-#include "generic.h"
-
-/*
- * Flash
- */
-
-static struct mtd_partition h5000_flash0_partitions[] = {
-	{
-		.name = "bootldr",
-		.size = 0x00040000,
-		.offset = 0,
-		.mask_flags = MTD_WRITEABLE,
-	},
-	{
-		.name = "root",
-		.size = MTDPART_SIZ_FULL,
-		.offset = MTDPART_OFS_APPEND,
-	},
-};
-
-static struct mtd_partition h5000_flash1_partitions[] = {
-	{
-		.name = "second root",
-		.size = SZ_16M - 0x00040000,
-		.offset = 0,
-	},
-	{
-		.name = "asset",
-		.size = MTDPART_SIZ_FULL,
-		.offset = MTDPART_OFS_APPEND,
-		.mask_flags = MTD_WRITEABLE,
-	},
-};
-
-static struct physmap_flash_data h5000_flash0_data = {
-	.width = 4,
-	.parts = h5000_flash0_partitions,
-	.nr_parts = ARRAY_SIZE(h5000_flash0_partitions),
-};
-
-static struct physmap_flash_data h5000_flash1_data = {
-	.width = 4,
-	.parts = h5000_flash1_partitions,
-	.nr_parts = ARRAY_SIZE(h5000_flash1_partitions),
-};
-
-static struct resource h5000_flash0_resources = {
-	.start = PXA_CS0_PHYS,
-	.end = PXA_CS0_PHYS + SZ_32M - 1,
-	.flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
-};
-
-static struct resource h5000_flash1_resources = {
-	.start = PXA_CS0_PHYS + SZ_32M,
-	.end = PXA_CS0_PHYS + SZ_32M + SZ_16M - 1,
-	.flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
-};
-
-static struct platform_device h5000_flash[] = {
-	{
-		.name = "physmap-flash",
-		.id = 0,
-		.resource = &h5000_flash0_resources,
-		.num_resources = 1,
-		.dev = {
-			.platform_data = &h5000_flash0_data,
-		},
-	},
-	{
-		.name = "physmap-flash",
-		.id = 1,
-		.resource = &h5000_flash1_resources,
-		.num_resources = 1,
-		.dev = {
-			.platform_data = &h5000_flash1_data,
-		},
-	},
-};
-
-/*
- * USB Device Controller
- */
-
-static struct pxa2xx_udc_mach_info h5000_udc_mach_info __initdata = {
-	.gpio_pullup = H5000_GPIO_USB_PULLUP,
-};
-
-/*
- * GPIO setup
- */
-
-static unsigned long h5000_pin_config[] __initdata = {
-	/* Crystal and Clock Signals */
-	GPIO12_32KHz,
-
-	/* SDRAM and Static Memory I/O Signals */
-	GPIO15_nCS_1,
-	GPIO78_nCS_2,
-	GPIO79_nCS_3,
-	GPIO80_nCS_4,
-
-	/* FFUART */
-	GPIO34_FFUART_RXD,
-	GPIO35_FFUART_CTS,
-	GPIO36_FFUART_DCD,
-	GPIO37_FFUART_DSR,
-	GPIO38_FFUART_RI,
-	GPIO39_FFUART_TXD,
-	GPIO40_FFUART_DTR,
-	GPIO41_FFUART_RTS,
-
-	/* BTUART */
-	GPIO42_BTUART_RXD,
-	GPIO43_BTUART_TXD,
-	GPIO44_BTUART_CTS,
-	GPIO45_BTUART_RTS,
-
-	/* SSP1 */
-	GPIO23_SSP1_SCLK,
-	GPIO25_SSP1_TXD,
-	GPIO26_SSP1_RXD,
-
-	/* I2S */
-	GPIO28_I2S_BITCLK_OUT,
-	GPIO29_I2S_SDATA_IN,
-	GPIO30_I2S_SDATA_OUT,
-	GPIO31_I2S_SYNC,
-	GPIO32_I2S_SYSCLK,
-};
-
-/*
- * Localbus setup:
- * CS0: Flash;
- * CS1: MediaQ chip, select 16-bit bus and vlio;
- * CS5: SAMCOP.
- */
-
-static void fix_msc(void)
-{
-	__raw_writel(0x129c24f2, MSC0);
-	__raw_writel(0x7ff424fa, MSC1);
-	__raw_writel(0x7ff47ff4, MSC2);
-
-	__raw_writel(__raw_readl(MDREFR) | 0x02080000, MDREFR);
-}
-
-/*
- * Platform devices
- */
-
-static struct platform_device *devices[] __initdata = {
-	&h5000_flash[0],
-	&h5000_flash[1],
-};
-
-static void __init h5000_init(void)
-{
-	fix_msc();
-
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(h5000_pin_config));
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-	pxa_set_udc_info(&h5000_udc_mach_info);
-	platform_add_devices(ARRAY_AND_SIZE(devices));
-}
-
-MACHINE_START(H5400, "HP iPAQ H5000")
-	.atag_offset = 0x100,
-	.map_io = pxa25x_map_io,
-	.nr_irqs = PXA_NR_IRQS,
-	.init_irq = pxa25x_init_irq,
-	.handle_irq = pxa25x_handle_irq,
-	.timer = &pxa_timer,
-	.init_machine = h5000_init,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/himalaya.c b/ANDROID_3.4.5/arch/arm/mach-pxa/himalaya.c
deleted file mode 100644
index 2962de89..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/himalaya.c
+++ /dev/null
@@ -1,169 +0,0 @@
-/*
- * linux/arch/arm/mach-pxa/himalaya.c
- *
- * Hardware definitions for the HTC Himalaya
- *
- * Based on 2.6.21-hh20's himalaya.c and himalaya_lcd.c
- *
- * Copyright (c) 2008 Zbynek Michl <Zbynek.Michl@seznam.cz>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/fb.h>
-#include <linux/platform_device.h>
-
-#include <video/w100fb.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include <mach/pxa25x.h>
-
-#include "generic.h"
-
-/* ---------------------- Himalaya LCD definitions -------------------- */
-
-static struct w100_gen_regs himalaya_lcd_regs = {
-	.lcd_format =        0x00000003,
-	.lcdd_cntl1 =        0x00000000,
-	.lcdd_cntl2 =        0x0003ffff,
-	.genlcd_cntl1 =      0x00fff003,
-	.genlcd_cntl2 =      0x00000003,
-	.genlcd_cntl3 =      0x000102aa,
-};
-
-static struct w100_mode himalaya4_lcd_mode = {
-	.xres 		= 240,
-	.yres 		= 320,
-	.left_margin 	= 0,
-	.right_margin 	= 31,
-	.upper_margin 	= 15,
-	.lower_margin 	= 0,
-	.crtc_ss	= 0x80150014,
-	.crtc_ls	= 0xa0fb00f7,
-	.crtc_gs	= 0xc0080007,
-	.crtc_vpos_gs	= 0x00080007,
-	.crtc_rev	= 0x0000000a,
-	.crtc_dclk	= 0x81700030,
-	.crtc_gclk	= 0x8015010f,
-	.crtc_goe	= 0x00000000,
-	.pll_freq 	= 80,
-	.pixclk_divider = 15,
-	.pixclk_divider_rotated = 15,
-	.pixclk_src     = CLK_SRC_PLL,
-	.sysclk_divider = 0,
-	.sysclk_src     = CLK_SRC_PLL,
-};
-
-static struct w100_mode himalaya6_lcd_mode = {
-	.xres 		= 240,
-	.yres 		= 320,
-	.left_margin 	= 9,
-	.right_margin 	= 8,
-	.upper_margin 	= 5,
-	.lower_margin 	= 4,
-	.crtc_ss	= 0x80150014,
-	.crtc_ls	= 0xa0fb00f7,
-	.crtc_gs	= 0xc0080007,
-	.crtc_vpos_gs	= 0x00080007,
-	.crtc_rev	= 0x0000000a,
-	.crtc_dclk	= 0xa1700030,
-	.crtc_gclk	= 0x8015010f,
-	.crtc_goe	= 0x00000000,
-	.pll_freq 	= 95,
-	.pixclk_divider = 0xb,
-	.pixclk_divider_rotated = 4,
-	.pixclk_src     = CLK_SRC_PLL,
-	.sysclk_divider = 1,
-	.sysclk_src     = CLK_SRC_PLL,
-};
-
-static struct w100_gpio_regs himalaya_w100_gpio_info = {
-	.init_data1 = 0xffff0000,	/* GPIO_DATA  */
-	.gpio_dir1  = 0x00000000,	/* GPIO_CNTL1 */
-	.gpio_oe1   = 0x003c0000,	/* GPIO_CNTL2 */
-	.init_data2 = 0x00000000,	/* GPIO_DATA2 */
-	.gpio_dir2  = 0x00000000,	/* GPIO_CNTL3 */
-	.gpio_oe2   = 0x00000000,	/* GPIO_CNTL4 */
-};
-
-static struct w100fb_mach_info himalaya_fb_info = {
-	.num_modes  = 1,
-	.regs       = &himalaya_lcd_regs,
-	.gpio       = &himalaya_w100_gpio_info,
-	.xtal_freq = 16000000,
-};
-
-static struct resource himalaya_fb_resources[] = {
-	[0] = {
-		.start	= 0x08000000,
-		.end	= 0x08ffffff,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device himalaya_fb_device = {
-	.name           = "w100fb",
-	.id             = -1,
-	.dev            = {
-		.platform_data  = &himalaya_fb_info,
-	},
-	.num_resources  = ARRAY_SIZE(himalaya_fb_resources),
-	.resource       = himalaya_fb_resources,
-};
-
-/* ----------------------------------------------------------------------- */
-
-static struct platform_device *devices[] __initdata = {
-	&himalaya_fb_device,
-};
-
-static void __init himalaya_lcd_init(void)
-{
-	int himalaya_boardid;
-
-	himalaya_boardid = 0x4; /* hardcoded (detection needs ASIC3 functions) */
-	printk(KERN_INFO "himalaya LCD Driver init. boardid=%d\n",
-		himalaya_boardid);
-
-	switch (himalaya_boardid) {
-	case 0x4:
-		himalaya_fb_info.modelist = &himalaya4_lcd_mode;
-	break;
-	case 0x6:
-		himalaya_fb_info.modelist = &himalaya6_lcd_mode;
-	break;
-	default:
-		printk(KERN_INFO "himalaya lcd_init: unknown boardid=%d. Using 0x4\n",
-			himalaya_boardid);
-		himalaya_fb_info.modelist = &himalaya4_lcd_mode;
-	}
-}
-
-static void __init himalaya_init(void)
-{
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-	himalaya_lcd_init();
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-}
-
-
-MACHINE_START(HIMALAYA, "HTC Himalaya")
-	.atag_offset = 0x100,
-	.map_io = pxa25x_map_io,
-	.nr_irqs = PXA_NR_IRQS,
-	.init_irq = pxa25x_init_irq,
-	.handle_irq = pxa25x_handle_irq,
-	.init_machine = himalaya_init,
-	.timer = &pxa_timer,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/hx4700.c b/ANDROID_3.4.5/arch/arm/mach-pxa/hx4700.c
deleted file mode 100644
index b83b95a2..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/hx4700.c
+++ /dev/null
@@ -1,895 +0,0 @@
-/*
- * Support for HP iPAQ hx4700 PDAs.
- *
- * Copyright (c) 2008-2009 Philipp Zabel
- *
- * Based on code:
- *    Copyright (c) 2004 Hewlett-Packard Company.
- *    Copyright (c) 2005 SDG Systems, LLC
- *    Copyright (c) 2006 Anton Vorontsov <cbou@mail.ru>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/fb.h>
-#include <linux/gpio.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/lcd.h>
-#include <linux/mfd/htc-egpio.h>
-#include <linux/mfd/asic3.h>
-#include <linux/mtd/physmap.h>
-#include <linux/pda_power.h>
-#include <linux/pwm_backlight.h>
-#include <linux/regulator/driver.h>
-#include <linux/regulator/gpio-regulator.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/max1586.h>
-#include <linux/spi/ads7846.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/pxa2xx_spi.h>
-#include <linux/usb/gpio_vbus.h>
-#include <linux/i2c/pxa-i2c.h>
-
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include <mach/pxa27x.h>
-#include <mach/hx4700.h>
-#include <mach/irda.h>
-
-#include <sound/ak4641.h>
-#include <video/platform_lcd.h>
-#include <video/w100fb.h>
-
-#include "devices.h"
-#include "generic.h"
-
-/* Physical address space information */
-
-#define ATI_W3220_PHYS  PXA_CS2_PHYS /* ATI Imageon 3220 Graphics */
-#define ASIC3_PHYS      PXA_CS3_PHYS
-#define ASIC3_SD_PHYS   (PXA_CS3_PHYS + 0x02000000)
-
-static unsigned long hx4700_pin_config[] __initdata = {
-
-	/* SDRAM and Static Memory I/O Signals */
-	GPIO20_nSDCS_2,
-	GPIO21_nSDCS_3,
-	GPIO15_nCS_1,
-	GPIO78_nCS_2,   /* W3220 */
-	GPIO79_nCS_3,   /* ASIC3 */
-	GPIO80_nCS_4,
-	GPIO33_nCS_5,	/* EGPIO, WLAN */
-
-	/* PC CARD */
-	GPIO48_nPOE,
-	GPIO49_nPWE,
-	GPIO50_nPIOR,
-	GPIO51_nPIOW,
-	GPIO54_nPCE_2,
-	GPIO55_nPREG,
-	GPIO56_nPWAIT,
-	GPIO57_nIOIS16,
-	GPIO85_nPCE_1,
-	GPIO104_PSKTSEL,
-
-	/* I2C */
-	GPIO117_I2C_SCL,
-	GPIO118_I2C_SDA,
-
-	/* FFUART (RS-232) */
-	GPIO34_FFUART_RXD,
-	GPIO35_FFUART_CTS,
-	GPIO36_FFUART_DCD,
-	GPIO37_FFUART_DSR,
-	GPIO38_FFUART_RI,
-	GPIO39_FFUART_TXD,
-	GPIO40_FFUART_DTR,
-	GPIO41_FFUART_RTS,
-
-	/* BTUART */
-	GPIO42_BTUART_RXD,
-	GPIO43_BTUART_TXD_LPM_LOW,
-	GPIO44_BTUART_CTS,
-	GPIO45_BTUART_RTS_LPM_LOW,
-
-	/* PWM 1 (Backlight) */
-	GPIO17_PWM1_OUT,
-
-	/* I2S */
-	GPIO28_I2S_BITCLK_OUT,
-	GPIO29_I2S_SDATA_IN,
-	GPIO30_I2S_SDATA_OUT,
-	GPIO31_I2S_SYNC,
-	GPIO113_I2S_SYSCLK,
-
-	/* SSP 1 (NavPoint) */
-	GPIO23_SSP1_SCLK,
-	GPIO24_SSP1_SFRM,
-	GPIO25_SSP1_TXD,
-	GPIO26_SSP1_RXD,
-
-	/* SSP 2 (TSC2046) */
-	GPIO19_SSP2_SCLK,
-	GPIO86_SSP2_RXD,
-	GPIO87_SSP2_TXD,
-	GPIO88_GPIO,
-
-	/* HX4700 specific input GPIOs */
-	GPIO12_GPIO,	/* ASIC3_IRQ */
-	GPIO13_GPIO,	/* W3220_IRQ */
-	GPIO14_GPIO,	/* nWLAN_IRQ */
-
-	GPIO10_GPIO,	/* GSM_IRQ */
-	GPIO13_GPIO,	/* CPLD_IRQ */
-	GPIO107_GPIO,	/* DS1WM_IRQ */
-	GPIO108_GPIO,	/* GSM_READY */
-	GPIO58_GPIO,	/* TSC2046_nPENIRQ */
-	GPIO66_GPIO,	/* nSDIO_IRQ */
-};
-
-/*
- * IRDA
- */
-
-static struct pxaficp_platform_data ficp_info = {
-	.gpio_pwdown		= GPIO105_HX4700_nIR_ON,
-	.transceiver_cap	= IR_SIRMODE | IR_OFF,
-};
-
-/*
- * GPIO Keys
- */
-
-#define INIT_KEY(_code, _gpio, _active_low, _desc)	\
-	{						\
-		.code       = KEY_##_code,		\
-		.gpio       = _gpio,			\
-		.active_low = _active_low,		\
-		.desc       = _desc,			\
-		.type       = EV_KEY,			\
-		.wakeup     = 1,			\
-	}
-
-static struct gpio_keys_button gpio_keys_buttons[] = {
-	INIT_KEY(POWER,       GPIO0_HX4700_nKEY_POWER,   1, "Power button"),
-	INIT_KEY(MAIL,        GPIO94_HX4700_KEY_MAIL,    0, "Mail button"),
-	INIT_KEY(ADDRESSBOOK, GPIO99_HX4700_KEY_CONTACTS,0, "Contacts button"),
-	INIT_KEY(RECORD,      GPIOD6_nKEY_RECORD,        1, "Record button"),
-	INIT_KEY(CALENDAR,    GPIOD1_nKEY_CALENDAR,      1, "Calendar button"),
-	INIT_KEY(HOMEPAGE,    GPIOD3_nKEY_HOME,          1, "Home button"),
-};
-
-static struct gpio_keys_platform_data gpio_keys_data = {
-	.buttons = gpio_keys_buttons,
-	.nbuttons = ARRAY_SIZE(gpio_keys_buttons),
-};
-
-static struct platform_device gpio_keys = {
-	.name = "gpio-keys",
-	.dev  = {
-		.platform_data = &gpio_keys_data,
-	},
-	.id   = -1,
-};
-
-/*
- * ASIC3
- */
-
-static u16 asic3_gpio_config[] = {
-	/* ASIC3 GPIO banks A and B along with some of C and D
-	   implement the buffering for the CF slot. */
-	ASIC3_CONFIG_GPIO(0, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(1, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(2, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(3, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(4, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(5, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(6, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(7, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(8, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(9, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(10, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(11, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(12, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(13, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(14, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(15, 1, 1, 0),
-
-	ASIC3_CONFIG_GPIO(16, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(17, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(18, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(19, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(20, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(21, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(22, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(23, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(24, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(25, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(26, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(27, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(28, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(29, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(30, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(31, 1, 1, 0),
-
-	/* GPIOC - CF, LEDs, SD */
-	ASIC3_GPIOC0_LED0,		/* red */
-	ASIC3_GPIOC1_LED1,		/* green */
-	ASIC3_GPIOC2_LED2,		/* blue */
-	ASIC3_GPIOC4_CF_nCD,
-	ASIC3_GPIOC5_nCIOW,
-	ASIC3_GPIOC6_nCIOR,
-	ASIC3_GPIOC7_nPCE_1,
-	ASIC3_GPIOC8_nPCE_2,
-	ASIC3_GPIOC9_nPOE,
-	ASIC3_GPIOC10_nPWE,
-	ASIC3_GPIOC11_PSKTSEL,
-	ASIC3_GPIOC12_nPREG,
-	ASIC3_GPIOC13_nPWAIT,
-	ASIC3_GPIOC14_nPIOIS16,
-	ASIC3_GPIOC15_nPIOR,
-
-	/* GPIOD: input GPIOs, CF */
-	ASIC3_GPIOD11_nCIOIS16,
-	ASIC3_GPIOD12_nCWAIT,
-	ASIC3_GPIOD15_nPIOW,
-};
-
-static struct asic3_led asic3_leds[ASIC3_NUM_LEDS] = {
-	[0] = {
-		.name = "hx4700:amber",
-		.default_trigger = "ds2760-battery.0-charging-blink-full-solid",
-	},
-	[1] = {
-		.name = "hx4700:green",
-		.default_trigger = "unused",
-	},
-	[2] = {
-		.name = "hx4700:blue",
-		.default_trigger = "hx4700-radio",
-	},
-};
-
-static struct resource asic3_resources[] = {
-	/* GPIO part */
-	[0] = {
-		.start	= ASIC3_PHYS,
-		.end	= ASIC3_PHYS + ASIC3_MAP_SIZE_16BIT - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= PXA_GPIO_TO_IRQ(GPIO12_HX4700_ASIC3_IRQ),
-		.end	= PXA_GPIO_TO_IRQ(GPIO12_HX4700_ASIC3_IRQ),
-		.flags	= IORESOURCE_IRQ,
-	},
-	/* SD part */
-	[2] = {
-		.start	= ASIC3_SD_PHYS,
-		.end	= ASIC3_SD_PHYS + ASIC3_MAP_SIZE_16BIT - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[3] = {
-		.start	= PXA_GPIO_TO_IRQ(GPIO66_HX4700_ASIC3_nSDIO_IRQ),
-		.end	= PXA_GPIO_TO_IRQ(GPIO66_HX4700_ASIC3_nSDIO_IRQ),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct asic3_platform_data asic3_platform_data = {
-	.gpio_config     = asic3_gpio_config,
-	.gpio_config_num = ARRAY_SIZE(asic3_gpio_config),
-	.irq_base        = IRQ_BOARD_START,
-	.gpio_base       = HX4700_ASIC3_GPIO_BASE,
-	.leds            = asic3_leds,
-};
-
-static struct platform_device asic3 = {
-	.name          = "asic3",
-	.id            = -1,
-	.resource      = asic3_resources,
-	.num_resources = ARRAY_SIZE(asic3_resources),
-	.dev = {
-		.platform_data = &asic3_platform_data,
-	},
-};
-
-/*
- * EGPIO
- */
-
-static struct resource egpio_resources[] = {
-	[0] = {
-		.start = PXA_CS5_PHYS,
-		.end   = PXA_CS5_PHYS + 0x4 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-};
-
-static struct htc_egpio_chip egpio_chips[] = {
-	[0] = {
-		.reg_start = 0,
-		.gpio_base = HX4700_EGPIO_BASE,
-		.num_gpios = 8,
-		.direction = HTC_EGPIO_OUTPUT,
-	},
-};
-
-static struct htc_egpio_platform_data egpio_info = {
-	.reg_width = 16,
-	.bus_width = 16,
-	.chip      = egpio_chips,
-	.num_chips = ARRAY_SIZE(egpio_chips),
-};
-
-static struct platform_device egpio = {
-	.name          = "htc-egpio",
-	.id            = -1,
-	.resource      = egpio_resources,
-	.num_resources = ARRAY_SIZE(egpio_resources),
-	.dev = {
-		.platform_data = &egpio_info,
-	},
-};
-
-/*
- * LCD - Sony display connected to ATI Imageon w3220
- */
-
-static void sony_lcd_init(void)
-{
-	gpio_set_value(GPIO84_HX4700_LCD_SQN, 1);
-	gpio_set_value(GPIO110_HX4700_LCD_LVDD_3V3_ON, 0);
-	gpio_set_value(GPIO111_HX4700_LCD_AVDD_3V3_ON, 0);
-	gpio_set_value(GPIO70_HX4700_LCD_SLIN1, 0);
-	gpio_set_value(GPIO62_HX4700_LCD_nRESET, 0);
-	mdelay(10);
-	gpio_set_value(GPIO59_HX4700_LCD_PC1, 0);
-	gpio_set_value(GPIO110_HX4700_LCD_LVDD_3V3_ON, 0);
-	mdelay(20);
-
-	gpio_set_value(GPIO110_HX4700_LCD_LVDD_3V3_ON, 1);
-	mdelay(5);
-	gpio_set_value(GPIO111_HX4700_LCD_AVDD_3V3_ON, 1);
-
-	/* FIXME: init w3220 registers here */
-
-	mdelay(5);
-	gpio_set_value(GPIO70_HX4700_LCD_SLIN1, 1);
-	mdelay(10);
-	gpio_set_value(GPIO62_HX4700_LCD_nRESET, 1);
-	mdelay(10);
-	gpio_set_value(GPIO59_HX4700_LCD_PC1, 1);
-	mdelay(10);
-	gpio_set_value(GPIO112_HX4700_LCD_N2V7_7V3_ON, 1);
-}
-
-static void sony_lcd_off(void)
-{
-	gpio_set_value(GPIO59_HX4700_LCD_PC1, 0);
-	gpio_set_value(GPIO62_HX4700_LCD_nRESET, 0);
-	mdelay(10);
-	gpio_set_value(GPIO112_HX4700_LCD_N2V7_7V3_ON, 0);
-	mdelay(10);
-	gpio_set_value(GPIO111_HX4700_LCD_AVDD_3V3_ON, 0);
-	mdelay(10);
-	gpio_set_value(GPIO110_HX4700_LCD_LVDD_3V3_ON, 0);
-}
-
-#ifdef CONFIG_PM
-static void w3220_lcd_suspend(struct w100fb_par *wfb)
-{
-	sony_lcd_off();
-}
-
-static void w3220_lcd_resume(struct w100fb_par *wfb)
-{
-	sony_lcd_init();
-}
-#else
-#define w3220_lcd_resume	NULL
-#define w3220_lcd_suspend	NULL
-#endif
-
-static struct w100_tg_info w3220_tg_info = {
-	.suspend	= w3220_lcd_suspend,
-	.resume		= w3220_lcd_resume,
-};
-
-/*  				 W3220_VGA		QVGA */
-static struct w100_gen_regs w3220_regs = {
-	.lcd_format =        0x00000003,
-	.lcdd_cntl1 =        0x00000000,
-	.lcdd_cntl2 =        0x0003ffff,
-	.genlcd_cntl1 =      0x00abf003,	/* 0x00fff003 */
-	.genlcd_cntl2 =      0x00000003,
-	.genlcd_cntl3 =      0x000102aa,
-};
-
-static struct w100_mode w3220_modes[] = {
-{
-	.xres 		= 480,
-	.yres 		= 640,
-	.left_margin 	= 15,
-	.right_margin 	= 16,
-	.upper_margin 	= 8,
-	.lower_margin 	= 7,
-	.crtc_ss	= 0x00000000,
-	.crtc_ls	= 0xa1ff01f9,	/* 0x21ff01f9 */
-	.crtc_gs	= 0xc0000000,	/* 0x40000000 */
-	.crtc_vpos_gs	= 0x0000028f,
-	.crtc_ps1_active = 0x00000000,	/* 0x41060010 */
-	.crtc_rev	= 0,
-	.crtc_dclk	= 0x80000000,
-	.crtc_gclk	= 0x040a0104,
-	.crtc_goe	= 0,
-	.pll_freq 	= 95,
-	.pixclk_divider = 4,
-	.pixclk_divider_rotated = 4,
-	.pixclk_src     = CLK_SRC_PLL,
-	.sysclk_divider = 0,
-	.sysclk_src     = CLK_SRC_PLL,
-},
-{
-	.xres 		= 240,
-	.yres 		= 320,
-	.left_margin 	= 9,
-	.right_margin 	= 8,
-	.upper_margin 	= 5,
-	.lower_margin 	= 4,
-	.crtc_ss	= 0x80150014,
-	.crtc_ls        = 0xa0fb00f7,
-	.crtc_gs	= 0xc0080007,
-	.crtc_vpos_gs	= 0x00080007,
-	.crtc_rev	= 0x0000000a,
-	.crtc_dclk	= 0x81700030,
-	.crtc_gclk	= 0x8015010f,
-	.crtc_goe	= 0x00000000,
-	.pll_freq 	= 95,
-	.pixclk_divider = 4,
-	.pixclk_divider_rotated = 4,
-	.pixclk_src     = CLK_SRC_PLL,
-	.sysclk_divider = 0,
-	.sysclk_src     = CLK_SRC_PLL,
-},
-};
-
-struct w100_mem_info w3220_mem_info = {
-	.ext_cntl        = 0x09640011,
-	.sdram_mode_reg  = 0x00600021,
-	.ext_timing_cntl = 0x1a001545,	/* 0x15001545 */
-	.io_cntl         = 0x7ddd7333,
-	.size            = 0x1fffff,
-};
-
-struct w100_bm_mem_info w3220_bm_mem_info = {
-	.ext_mem_bw = 0x50413e01,
-	.offset = 0,
-	.ext_timing_ctl = 0x00043f7f,
-	.ext_cntl = 0x00000010,
-	.mode_reg = 0x00250000,
-	.io_cntl = 0x0fff0000,
-	.config = 0x08301480,
-};
-
-static struct w100_gpio_regs w3220_gpio_info = {
-	.init_data1 = 0xdfe00100,	/* GPIO_DATA */
-	.gpio_dir1  = 0xffff0000,	/* GPIO_CNTL1 */
-	.gpio_oe1   = 0x00000000,	/* GPIO_CNTL2 */
-	.init_data2 = 0x00000000,	/* GPIO_DATA2 */
-	.gpio_dir2  = 0x00000000,	/* GPIO_CNTL3 */
-	.gpio_oe2   = 0x00000000,	/* GPIO_CNTL4 */
-};
-
-static struct w100fb_mach_info w3220_info = {
-	.tg        = &w3220_tg_info,
-	.mem       = &w3220_mem_info,
-	.bm_mem    = &w3220_bm_mem_info,
-	.gpio      = &w3220_gpio_info,
-	.regs      = &w3220_regs,
-	.modelist  = w3220_modes,
-	.num_modes = 2,
-	.xtal_freq = 16000000,
-};
-
-static struct resource w3220_resources[] = {
-	[0] = {
-		.start	= ATI_W3220_PHYS,
-		.end	= ATI_W3220_PHYS + 0x00ffffff,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device w3220 = {
-	.name	= "w100fb",
-	.id	= -1,
-	.dev	= {
-		.platform_data = &w3220_info,
-	},
-	.num_resources = ARRAY_SIZE(w3220_resources),
-	.resource      = w3220_resources,
-};
-
-static void hx4700_lcd_set_power(struct plat_lcd_data *pd, unsigned int power)
-{
-	if (power)
-		sony_lcd_init();
-	else
-		sony_lcd_off();
-}
-
-static struct plat_lcd_data hx4700_lcd_data = {
-	.set_power = hx4700_lcd_set_power,
-};
-
-static struct platform_device hx4700_lcd = {
-	.name = "platform-lcd",
-	.id   = -1,
-	.dev  = {
-		.platform_data = &hx4700_lcd_data,
-		.parent        = &w3220.dev,
-	},
-};
-
-/*
- * Backlight
- */
-
-static struct platform_pwm_backlight_data backlight_data = {
-	.pwm_id         = 1,
-	.max_brightness = 200,
-	.dft_brightness = 100,
-	.pwm_period_ns  = 30923,
-};
-
-static struct platform_device backlight = {
-	.name = "pwm-backlight",
-	.id   = -1,
-	.dev  = {
-		.parent        = &pxa27x_device_pwm1.dev,
-		.platform_data = &backlight_data,
-	},
-};
-
-/*
- * USB "Transceiver"
- */
-
-static struct gpio_vbus_mach_info gpio_vbus_info = {
-	.gpio_pullup        = GPIO76_HX4700_USBC_PUEN,
-	.gpio_vbus          = GPIOD14_nUSBC_DETECT,
-	.gpio_vbus_inverted = 1,
-};
-
-static struct platform_device gpio_vbus = {
-	.name          = "gpio-vbus",
-	.id            = -1,
-	.dev = {
-		.platform_data = &gpio_vbus_info,
-	},
-};
-
-/*
- * Touchscreen - TSC2046 connected to SSP2
- */
-
-static const struct ads7846_platform_data tsc2046_info = {
-	.model            = 7846,
-	.vref_delay_usecs = 100,
-	.pressure_max     = 1024,
-	.debounce_max     = 10,
-	.debounce_tol     = 3,
-	.debounce_rep     = 1,
-	.gpio_pendown     = GPIO58_HX4700_TSC2046_nPENIRQ,
-};
-
-static struct pxa2xx_spi_chip tsc2046_chip = {
-	.tx_threshold = 1,
-	.rx_threshold = 2,
-	.timeout      = 64,
-	.gpio_cs      = GPIO88_HX4700_TSC2046_CS,
-};
-
-static struct spi_board_info tsc2046_board_info[] __initdata = {
-	{
-		.modalias        = "ads7846",
-		.bus_num         = 2,
-		.max_speed_hz    = 2600000, /* 100 kHz sample rate */
-		.irq             = PXA_GPIO_TO_IRQ(GPIO58_HX4700_TSC2046_nPENIRQ),
-		.platform_data   = &tsc2046_info,
-		.controller_data = &tsc2046_chip,
-	},
-};
-
-static struct pxa2xx_spi_master pxa_ssp2_master_info = {
-	.num_chipselect = 1,
-	.clock_enable   = CKEN_SSP2,
-	.enable_dma     = 1,
-};
-
-/*
- * External power
- */
-
-static int power_supply_init(struct device *dev)
-{
-	return gpio_request(GPIOD9_nAC_IN, "AC charger detect");
-}
-
-static int hx4700_is_ac_online(void)
-{
-	return !gpio_get_value(GPIOD9_nAC_IN);
-}
-
-static void power_supply_exit(struct device *dev)
-{
-	gpio_free(GPIOD9_nAC_IN);
-}
-
-static char *hx4700_supplicants[] = {
-	"ds2760-battery.0", "backup-battery"
-};
-
-static struct pda_power_pdata power_supply_info = {
-	.init            = power_supply_init,
-	.is_ac_online    = hx4700_is_ac_online,
-	.exit            = power_supply_exit,
-	.supplied_to     = hx4700_supplicants,
-	.num_supplicants = ARRAY_SIZE(hx4700_supplicants),
-};
-
-static struct resource power_supply_resources[] = {
-	[0] = {
-		.name  = "ac",
-		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
-		         IORESOURCE_IRQ_LOWEDGE,
-		.start = PXA_GPIO_TO_IRQ(GPIOD9_nAC_IN),
-		.end   = PXA_GPIO_TO_IRQ(GPIOD9_nAC_IN),
-	},
-	[1] = {
-		.name  = "usb",
-		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
-		         IORESOURCE_IRQ_LOWEDGE,
-		.start = PXA_GPIO_TO_IRQ(GPIOD14_nUSBC_DETECT),
-		.end   = PXA_GPIO_TO_IRQ(GPIOD14_nUSBC_DETECT),
-	},
-};
-
-static struct platform_device power_supply = {
-	.name = "pda-power",
-	.id   = -1,
-	.dev  = {
-		.platform_data = &power_supply_info,
-	},
-	.resource      = power_supply_resources,
-	.num_resources = ARRAY_SIZE(power_supply_resources),
-};
-
-/*
- * Battery charger
- */
-
-static struct regulator_consumer_supply bq24022_consumers[] = {
-	{
-		.supply = "vbus_draw",
-	},
-	{
-		.supply = "ac_draw",
-	},
-};
-
-static struct regulator_init_data bq24022_init_data = {
-	.constraints = {
-		.max_uA         = 500000,
-		.valid_ops_mask = REGULATOR_CHANGE_CURRENT|REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies  = ARRAY_SIZE(bq24022_consumers),
-	.consumer_supplies      = bq24022_consumers,
-};
-
-static struct gpio bq24022_gpios[] = {
-	{ GPIO96_HX4700_BQ24022_ISET2, GPIOF_OUT_INIT_LOW, "bq24022_iset2" },
-};
-
-static struct gpio_regulator_state bq24022_states[] = {
-	{ .value = 100000, .gpios = (0 << 0) },
-	{ .value = 500000, .gpios = (1 << 0) },
-};
-
-static struct gpio_regulator_config bq24022_info = {
-	.supply_name = "bq24022",
-
-	.enable_gpio = GPIO72_HX4700_BQ24022_nCHARGE_EN,
-	.enable_high = 0,
-	.enabled_at_boot = 0,
-
-	.gpios = bq24022_gpios,
-	.nr_gpios = ARRAY_SIZE(bq24022_gpios),
-
-	.states = bq24022_states,
-	.nr_states = ARRAY_SIZE(bq24022_states),
-
-	.type = REGULATOR_CURRENT,
-	.init_data = &bq24022_init_data,
-};
-
-static struct platform_device bq24022 = {
-	.name = "gpio-regulator",
-	.id   = -1,
-	.dev  = {
-		.platform_data = &bq24022_info,
-	},
-};
-
-/*
- * StrataFlash
- */
-
-static void hx4700_set_vpp(struct platform_device *pdev, int vpp)
-{
-	gpio_set_value(GPIO91_HX4700_FLASH_VPEN, vpp);
-}
-
-static struct resource strataflash_resource[] = {
-	[0] = DEFINE_RES_MEM(PXA_CS0_PHYS, SZ_64M),
-	[1] = DEFINE_RES_MEM(PXA_CS0_PHYS + SZ_64M, SZ_64M),
-};
-
-static struct physmap_flash_data strataflash_data = {
-	.width = 4,
-	.set_vpp = hx4700_set_vpp,
-};
-
-static struct platform_device strataflash = {
-	.name          = "physmap-flash",
-	.id            = -1,
-	.resource      = strataflash_resource,
-	.num_resources = ARRAY_SIZE(strataflash_resource),
-	.dev = {
-		.platform_data = &strataflash_data,
-	},
-};
-
-/*
- * Maxim MAX1587A on PI2C
- */
-
-static struct regulator_consumer_supply max1587a_consumer = {
-	.supply = "vcc_core",
-};
-
-static struct regulator_init_data max1587a_v3_info = {
-	.constraints = {
-		.name = "vcc_core range",
-		.min_uV =  900000,
-		.max_uV = 1705000,
-		.always_on = 1,
-		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
-	},
-	.num_consumer_supplies = 1,
-	.consumer_supplies     = &max1587a_consumer,
-};
-
-static struct max1586_subdev_data max1587a_subdev = {
-	.name = "vcc_core",
-	.id   = MAX1586_V3,
-	.platform_data = &max1587a_v3_info,
-};
-
-static struct max1586_platform_data max1587a_info = {
-	.num_subdevs = 1,
-	.subdevs     = &max1587a_subdev,
-	.v3_gain     = MAX1586_GAIN_R24_3k32, /* 730..1550 mV */
-};
-
-static struct i2c_board_info __initdata pi2c_board_info[] = {
-	{
-		I2C_BOARD_INFO("max1586", 0x14),
-		.platform_data = &max1587a_info,
-	},
-};
-
-/*
- * Asahi Kasei AK4641 on I2C
- */
-
-static struct ak4641_platform_data ak4641_info = {
-	.gpio_power = GPIO27_HX4700_CODEC_ON,
-	.gpio_npdn  = GPIO109_HX4700_CODEC_nPDN,
-};
-
-static struct i2c_board_info i2c_board_info[] __initdata = {
-	{
-		I2C_BOARD_INFO("ak4641", 0x12),
-		.platform_data = &ak4641_info,
-	},
-};
-
-static struct platform_device audio = {
-	.name	= "hx4700-audio",
-	.id	= -1,
-};
-
-
-/*
- * Platform devices
- */
-
-static struct platform_device *devices[] __initdata = {
-	&asic3,
-	&gpio_keys,
-	&backlight,
-	&w3220,
-	&hx4700_lcd,
-	&egpio,
-	&bq24022,
-	&gpio_vbus,
-	&power_supply,
-	&strataflash,
-	&audio,
-};
-
-static struct gpio global_gpios[] = {
-	{ GPIO12_HX4700_ASIC3_IRQ, GPIOF_IN, "ASIC3_IRQ" },
-	{ GPIO13_HX4700_W3220_IRQ, GPIOF_IN, "W3220_IRQ" },
-	{ GPIO14_HX4700_nWLAN_IRQ, GPIOF_IN, "WLAN_IRQ" },
-	{ GPIO59_HX4700_LCD_PC1,          GPIOF_OUT_INIT_HIGH, "LCD_PC1" },
-	{ GPIO62_HX4700_LCD_nRESET,       GPIOF_OUT_INIT_HIGH, "LCD_RESET" },
-	{ GPIO70_HX4700_LCD_SLIN1,        GPIOF_OUT_INIT_HIGH, "LCD_SLIN1" },
-	{ GPIO84_HX4700_LCD_SQN,          GPIOF_OUT_INIT_HIGH, "LCD_SQN" },
-	{ GPIO110_HX4700_LCD_LVDD_3V3_ON, GPIOF_OUT_INIT_HIGH, "LCD_LVDD" },
-	{ GPIO111_HX4700_LCD_AVDD_3V3_ON, GPIOF_OUT_INIT_HIGH, "LCD_AVDD" },
-	{ GPIO32_HX4700_RS232_ON,         GPIOF_OUT_INIT_HIGH, "RS232_ON" },
-	{ GPIO71_HX4700_ASIC3_nRESET,     GPIOF_OUT_INIT_HIGH, "ASIC3_nRESET" },
-	{ GPIO82_HX4700_EUART_RESET,      GPIOF_OUT_INIT_HIGH, "EUART_RESET" },
-};
-
-static void __init hx4700_init(void)
-{
-	int ret;
-
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(hx4700_pin_config));
-	ret = gpio_request_array(ARRAY_AND_SIZE(global_gpios));
-	if (ret)
-		pr_err ("hx4700: Failed to request GPIOs.\n");
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-
-	pxa_set_ficp_info(&ficp_info);
-	pxa27x_set_i2c_power_info(NULL);
-	pxa_set_i2c_info(NULL);
-	i2c_register_board_info(0, ARRAY_AND_SIZE(i2c_board_info));
-	i2c_register_board_info(1, ARRAY_AND_SIZE(pi2c_board_info));
-	pxa2xx_set_spi_info(2, &pxa_ssp2_master_info);
-	spi_register_board_info(ARRAY_AND_SIZE(tsc2046_board_info));
-
-	gpio_set_value(GPIO71_HX4700_ASIC3_nRESET, 0);
-	mdelay(10);
-	gpio_set_value(GPIO71_HX4700_ASIC3_nRESET, 1);
-	mdelay(10);
-}
-
-MACHINE_START(H4700, "HP iPAQ HX4700")
-	.atag_offset  = 0x100,
-	.map_io       = pxa27x_map_io,
-	.nr_irqs      = HX4700_NR_IRQS,
-	.init_irq     = pxa27x_init_irq,
-	.handle_irq     = pxa27x_handle_irq,
-	.init_machine = hx4700_init,
-	.timer        = &pxa_timer,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/icontrol.c b/ANDROID_3.4.5/arch/arm/mach-pxa/icontrol.c
deleted file mode 100644
index 1d02eabc..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/icontrol.c
+++ /dev/null
@@ -1,202 +0,0 @@
-/*
- * linux/arch/arm/mach-pxa/icontrol.c
- *
- * Support for the iControl and SafeTcam platforms from TMT Services
- * using the Embedian MXM-8x10 Computer on Module
- *
- * Copyright (C) 2009 TMT Services & Supplies (Pty) Ltd.
- *
- * 2010-01-21 Hennie van der Merve <hvdmerwe@tmtservies.co.za>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/irq.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include <mach/pxa320.h>
-#include <mach/mxm8x10.h>
-
-#include <linux/spi/spi.h>
-#include <linux/spi/pxa2xx_spi.h>
-#include <linux/can/platform/mcp251x.h>
-
-#include "generic.h"
-
-#define ICONTROL_MCP251x_nCS1	(15)
-#define ICONTROL_MCP251x_nCS2	(16)
-#define ICONTROL_MCP251x_nCS3	(17)
-#define ICONTROL_MCP251x_nCS4	(24)
-
-#define ICONTROL_MCP251x_nIRQ1	(74)
-#define ICONTROL_MCP251x_nIRQ2	(75)
-#define ICONTROL_MCP251x_nIRQ3	(76)
-#define ICONTROL_MCP251x_nIRQ4	(77)
-
-static struct pxa2xx_spi_chip mcp251x_chip_info1 = {
-	.tx_threshold   = 8,
-	.rx_threshold   = 128,
-	.dma_burst_size = 8,
-	.timeout        = 235,
-	.gpio_cs        = ICONTROL_MCP251x_nCS1
-};
-
-static struct pxa2xx_spi_chip mcp251x_chip_info2 = {
-	.tx_threshold   = 8,
-	.rx_threshold   = 128,
-	.dma_burst_size = 8,
-	.timeout        = 235,
-	.gpio_cs        = ICONTROL_MCP251x_nCS2
-};
-
-static struct pxa2xx_spi_chip mcp251x_chip_info3 = {
-	.tx_threshold   = 8,
-	.rx_threshold   = 128,
-	.dma_burst_size = 8,
-	.timeout        = 235,
-	.gpio_cs        = ICONTROL_MCP251x_nCS3
-};
-
-static struct pxa2xx_spi_chip mcp251x_chip_info4 = {
-	.tx_threshold   = 8,
-	.rx_threshold   = 128,
-	.dma_burst_size = 8,
-	.timeout        = 235,
-	.gpio_cs        = ICONTROL_MCP251x_nCS4
-};
-
-static struct mcp251x_platform_data mcp251x_info = {
-	.oscillator_frequency = 16E6,
-	.board_specific_setup = NULL,
-	.power_enable         = NULL,
-	.transceiver_enable   = NULL
-};
-
-static struct spi_board_info mcp251x_board_info[] = {
-	{
-		.modalias        = "mcp2515",
-		.max_speed_hz    = 6500000,
-		.bus_num         = 3,
-		.chip_select     = 0,
-		.platform_data   = &mcp251x_info,
-		.controller_data = &mcp251x_chip_info1,
-		.irq             = PXA_GPIO_TO_IRQ(ICONTROL_MCP251x_nIRQ1)
-	},
-	{
-		.modalias        = "mcp2515",
-		.max_speed_hz    = 6500000,
-		.bus_num         = 3,
-		.chip_select     = 1,
-		.platform_data   = &mcp251x_info,
-		.controller_data = &mcp251x_chip_info2,
-		.irq             = PXA_GPIO_TO_IRQ(ICONTROL_MCP251x_nIRQ2)
-	},
-	{
-		.modalias        = "mcp2515",
-		.max_speed_hz    = 6500000,
-		.bus_num         = 4,
-		.chip_select     = 0,
-		.platform_data   = &mcp251x_info,
-		.controller_data = &mcp251x_chip_info3,
-		.irq             = PXA_GPIO_TO_IRQ(ICONTROL_MCP251x_nIRQ3)
-	},
-	{
-		.modalias        = "mcp2515",
-		.max_speed_hz    = 6500000,
-		.bus_num         = 4,
-		.chip_select     = 1,
-		.platform_data   = &mcp251x_info,
-		.controller_data = &mcp251x_chip_info4,
-		.irq             = PXA_GPIO_TO_IRQ(ICONTROL_MCP251x_nIRQ4)
-	}
-};
-
-static struct pxa2xx_spi_master pxa_ssp3_spi_master_info = {
-	.clock_enable   = CKEN_SSP3,
-	.num_chipselect = 2,
-	.enable_dma     = 1
-};
-
-static struct pxa2xx_spi_master pxa_ssp4_spi_master_info = {
-	.clock_enable   = CKEN_SSP4,
-	.num_chipselect = 2,
-	.enable_dma     = 1
-};
-
-struct platform_device pxa_spi_ssp3 = {
-	.name          = "pxa2xx-spi",
-	.id            = 3,
-	.dev           = {
-		.platform_data = &pxa_ssp3_spi_master_info,
-	}
-};
-
-struct platform_device pxa_spi_ssp4 = {
-	.name          = "pxa2xx-spi",
-	.id            = 4,
-	.dev           = {
-		.platform_data = &pxa_ssp4_spi_master_info,
-	}
-};
-
-static struct platform_device *icontrol_spi_devices[] __initdata = {
-	&pxa_spi_ssp3,
-	&pxa_spi_ssp4,
-};
-
-static mfp_cfg_t mfp_can_cfg[] __initdata = {
-	/* CAN CS lines */
-	GPIO15_GPIO,
-	GPIO16_GPIO,
-	GPIO17_GPIO,
-	GPIO24_GPIO,
-
-	/* SPI (SSP3) lines */
-	GPIO89_SSP3_SCLK,
-	GPIO91_SSP3_TXD,
-	GPIO92_SSP3_RXD,
-
-	/* SPI (SSP4) lines */
-	GPIO93_SSP4_SCLK,
-	GPIO95_SSP4_TXD,
-	GPIO96_SSP4_RXD,
-
-	/* CAN nIRQ lines */
-	GPIO74_GPIO | MFP_LPM_EDGE_RISE,
-	GPIO75_GPIO | MFP_LPM_EDGE_RISE,
-	GPIO76_GPIO | MFP_LPM_EDGE_RISE,
-	GPIO77_GPIO | MFP_LPM_EDGE_RISE
-};
-
-static void __init icontrol_can_init(void)
-{
-	pxa3xx_mfp_config(ARRAY_AND_SIZE(mfp_can_cfg));
-	platform_add_devices(ARRAY_AND_SIZE(icontrol_spi_devices));
-	spi_register_board_info(ARRAY_AND_SIZE(mcp251x_board_info));
-}
-
-static void __init icontrol_init(void)
-{
-	mxm_8x10_barebones_init();
-	mxm_8x10_usb_host_init();
-	mxm_8x10_mmc_init();
-
-	icontrol_can_init();
-}
-
-MACHINE_START(ICONTROL, "iControl/SafeTcam boards using Embedian MXM-8x10 CoM")
-	.atag_offset	= 0x100,
-	.map_io		= pxa3xx_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa3xx_init_irq,
-	.handle_irq	= pxa3xx_handle_irq,
-	.timer		= &pxa_timer,
-	.init_machine	= icontrol_init,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/idp.c b/ANDROID_3.4.5/arch/arm/mach-pxa/idp.c
deleted file mode 100644
index 6ff466bd..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/idp.c
+++ /dev/null
@@ -1,204 +0,0 @@
-/*
- *  linux/arch/arm/mach-pxa/idp.c
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- *
- *  Copyright (c) 2001 Cliff Brake, Accelent Systems Inc.
- *
- *  2001-09-13: Cliff Brake <cbrake@accelent.com>
- *              Initial code
- *
- *  2005-02-15: Cliff Brake <cliff.brake@gmail.com>
- *  		<http://www.vibren.com> <http://bec-systems.com>
- *              Updated for 2.6 kernel
- *
- */
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/platform_device.h>
-#include <linux/fb.h>
-
-#include <asm/setup.h>
-#include <asm/memory.h>
-#include <asm/mach-types.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <mach/pxa25x.h>
-#include <mach/idp.h>
-#include <mach/pxafb.h>
-#include <mach/bitfield.h>
-#include <mach/mmc.h>
-
-#include "generic.h"
-#include "devices.h"
-
-/* TODO:
- * - add pxa2xx_audio_ops_t device structure
- * - Ethernet interrupt
- */
-
-static unsigned long idp_pin_config[] __initdata = {
-	/* LCD */
-	GPIOxx_LCD_DSTN_16BPP,
-
-	/* BTUART */
-	GPIO42_BTUART_RXD,
-	GPIO43_BTUART_TXD,
-	GPIO44_BTUART_CTS,
-	GPIO45_BTUART_RTS,
-
-	/* STUART */
-	GPIO46_STUART_RXD,
-	GPIO47_STUART_TXD,
-
-	/* MMC */
-	GPIO6_MMC_CLK,
-	GPIO8_MMC_CS0,
-
-	/* Ethernet */
-	GPIO33_nCS_5,	/* Ethernet CS */
-	GPIO4_GPIO,	/* Ethernet IRQ */
-};
-
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.start	= (IDP_ETH_PHYS + 0x300),
-		.end	= (IDP_ETH_PHYS + 0xfffff),
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= PXA_GPIO_TO_IRQ(4),
-		.end	= PXA_GPIO_TO_IRQ(4),
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	}
-};
-
-static struct platform_device smc91x_device = {
-	.name		= "smc91x",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(smc91x_resources),
-	.resource	= smc91x_resources,
-};
-
-static void idp_backlight_power(int on)
-{
-	if (on) {
-		IDP_CPLD_LCD |= (1<<1);
-	} else {
-		IDP_CPLD_LCD &= ~(1<<1);
-	}
-}
-
-static void idp_vlcd(int on)
-{
-	if (on) {
-		IDP_CPLD_LCD |= (1<<2);
-	} else {
-		IDP_CPLD_LCD &= ~(1<<2);
-	}
-}
-
-static void idp_lcd_power(int on, struct fb_var_screeninfo *var)
-{
-	if (on) {
-		IDP_CPLD_LCD |= (1<<0);
-	} else {
-		IDP_CPLD_LCD &= ~(1<<0);
-	}
-
-	/* call idp_vlcd for now as core driver does not support
-	 * both power and vlcd hooks.  Note, this is not technically
-	 * the correct sequence, but seems to work.  Disclaimer:
-	 * this may eventually damage the display.
-	 */
-
-	idp_vlcd(on);
-}
-
-static struct pxafb_mode_info sharp_lm8v31_mode = {
-	.pixclock	= 270000,
-	.xres		= 640,
-	.yres		= 480,
-	.bpp		= 16,
-	.hsync_len	= 1,
-	.left_margin	= 3,
-	.right_margin	= 3,
-	.vsync_len	= 1,
-	.upper_margin	= 0,
-	.lower_margin	= 0,
-	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-	.cmap_greyscale	= 0,
-};
-
-static struct pxafb_mach_info sharp_lm8v31 = {
-	.modes          = &sharp_lm8v31_mode,
-	.num_modes      = 1,
-	.cmap_inverse	= 0,
-	.cmap_static	= 0,
-	.lcd_conn	= LCD_COLOR_DSTN_16BPP | LCD_PCLK_EDGE_FALL |
-			  LCD_AC_BIAS_FREQ(255),
-	.pxafb_backlight_power = &idp_backlight_power,
-	.pxafb_lcd_power = &idp_lcd_power
-};
-
-static struct pxamci_platform_data idp_mci_platform_data = {
-	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
-	.gpio_card_detect	= -1,
-	.gpio_card_ro		= -1,
-	.gpio_power		= -1,
-};
-
-static void __init idp_init(void)
-{
-	printk("idp_init()\n");
-
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(idp_pin_config));
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	platform_device_register(&smc91x_device);
-	//platform_device_register(&mst_audio_device);
-	pxa_set_fb_info(NULL, &sharp_lm8v31);
-	pxa_set_mci_info(&idp_mci_platform_data);
-}
-
-static struct map_desc idp_io_desc[] __initdata = {
-  	{
-		.virtual	=  IDP_COREVOLT_VIRT,
-		.pfn		= __phys_to_pfn(IDP_COREVOLT_PHYS),
-		.length		= IDP_COREVOLT_SIZE,
-		.type		= MT_DEVICE
-	}, {
-		.virtual	=  IDP_CPLD_VIRT,
-		.pfn		= __phys_to_pfn(IDP_CPLD_PHYS),
-		.length		= IDP_CPLD_SIZE,
-		.type		= MT_DEVICE
-	}
-};
-
-static void __init idp_map_io(void)
-{
-	pxa25x_map_io();
-	iotable_init(idp_io_desc, ARRAY_SIZE(idp_io_desc));
-}
-
-
-MACHINE_START(PXA_IDP, "Vibren PXA255 IDP")
-	/* Maintainer: Vibren Technologies */
-	.map_io		= idp_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa25x_init_irq,
-	.handle_irq	= pxa25x_handle_irq,
-	.timer		= &pxa_timer,
-	.init_machine	= idp_init,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/addr-map.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/addr-map.h
deleted file mode 100644
index bbf9df37..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/addr-map.h
+++ /dev/null
@@ -1,48 +0,0 @@
-#ifndef __ASM_MACH_ADDR_MAP_H
-#define __ASM_MACH_ADDR_MAP_H
-
-/*
- * Chip Selects
- */
-#define PXA_CS0_PHYS		0x00000000
-#define PXA_CS1_PHYS		0x04000000
-#define PXA_CS2_PHYS		0x08000000
-#define PXA_CS3_PHYS		0x0C000000
-#define PXA_CS4_PHYS		0x10000000
-#define PXA_CS5_PHYS		0x14000000
-
-#define PXA300_CS0_PHYS		0x00000000	/* PXA300/PXA310 _only_ */
-#define PXA300_CS1_PHYS		0x30000000	/* PXA300/PXA310 _only_ */
-#define PXA3xx_CS2_PHYS		0x10000000
-#define PXA3xx_CS3_PHYS		0x14000000
-
-/*
- * Peripheral Bus
- */
-#define PERIPH_PHYS		0x40000000
-#define PERIPH_VIRT		IOMEM(0xf2000000)
-#define PERIPH_SIZE		0x02000000
-
-/*
- * Static Memory Controller (w/ SDRAM controls on PXA25x/PXA27x)
- */
-#define PXA2XX_SMEMC_PHYS	0x48000000
-#define PXA3XX_SMEMC_PHYS	0x4a000000
-#define SMEMC_VIRT		IOMEM(0xf6000000)
-#define SMEMC_SIZE		0x00100000
-
-/*
- * Dynamic Memory Controller (only on PXA3xx)
- */
-#define DMEMC_PHYS		0x48100000
-#define DMEMC_VIRT		IOMEM(0xf6100000)
-#define DMEMC_SIZE		0x00100000
-
-/*
- * Internal Memory Controller (PXA27x and later)
- */
-#define IMEMC_PHYS		0x58000000
-#define IMEMC_VIRT		IOMEM(0xfe000000)
-#define IMEMC_SIZE		0x00100000
-
-#endif /* __ASM_MACH_ADDR_MAP_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/arcom-pcmcia.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/arcom-pcmcia.h
deleted file mode 100644
index d428be4d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/arcom-pcmcia.h
+++ /dev/null
@@ -1,11 +0,0 @@
-#ifndef __ARCOM_PCMCIA_H
-#define __ARCOM_PCMCIA_H
-
-struct arcom_pcmcia_pdata {
-	int	cd_gpio;
-	int	rdy_gpio;
-	int	pwr_gpio;
-	void	(*reset)(int state);
-};
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/audio.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/audio.h
deleted file mode 100644
index a3449e35..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/audio.h
+++ /dev/null
@@ -1,30 +0,0 @@
-#ifndef __ASM_ARCH_AUDIO_H__
-#define __ASM_ARCH_AUDIO_H__
-
-#include <sound/core.h>
-#include <sound/pcm.h>
-#include <sound/ac97_codec.h>
-
-/*
- * @reset_gpio: AC97 reset gpio (normally gpio113 or gpio95)
- *              a -1 value means no gpio will be used for reset
- * @codec_pdata: AC97 codec platform_data
-
- * reset_gpio should only be specified for pxa27x CPUs where a silicon
- * bug prevents correct operation of the reset line. If not specified,
- * the default behaviour on these CPUs is to consider gpio 113 as the
- * AC97 reset line, which is the default on most boards.
- */
-typedef struct {
-	int (*startup)(struct snd_pcm_substream *, void *);
-	void (*shutdown)(struct snd_pcm_substream *, void *);
-	void (*suspend)(void *);
-	void (*resume)(void *);
-	void *priv;
-	int reset_gpio;
-	void *codec_pdata[AC97_BUS_MAX_DEVICES];
-} pxa2xx_audio_ops_t;
-
-extern void pxa_set_ac97_info(pxa2xx_audio_ops_t *ops);
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/balloon3.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/balloon3.h
deleted file mode 100644
index 954641e6..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/balloon3.h
+++ /dev/null
@@ -1,182 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-pxa/balloon3.h
- *
- *  Authors:	Nick Bane and Wookey
- *  Created:	Oct, 2005
- *  Copyright:	Toby Churchill Ltd
- *  Cribbed from mainstone.c, by Nicholas Pitre
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef ASM_ARCH_BALLOON3_H
-#define ASM_ARCH_BALLOON3_H
-
-enum balloon3_features {
-	BALLOON3_FEATURE_OHCI,
-	BALLOON3_FEATURE_MMC,
-	BALLOON3_FEATURE_CF,
-	BALLOON3_FEATURE_AUDIO,
-	BALLOON3_FEATURE_TOPPOLY,
-};
-
-#define BALLOON3_FPGA_PHYS	PXA_CS4_PHYS
-#define BALLOON3_FPGA_VIRT	IOMEM(0xf1000000)	/* as per balloon2 */
-#define BALLOON3_FPGA_LENGTH	0x01000000
-
-#define	BALLOON3_FPGA_SETnCLR		(0x1000)
-
-/* FPGA / CPLD registers for CF socket */
-#define	BALLOON3_CF_STATUS_REG		(BALLOON3_FPGA_VIRT + 0x00e00008)
-#define	BALLOON3_CF_CONTROL_REG		(BALLOON3_FPGA_VIRT + 0x00e00008)
-/* FPGA / CPLD version register */
-#define	BALLOON3_FPGA_VER		(BALLOON3_FPGA_VIRT + 0x00e0001c)
-/* FPGA / CPLD registers for NAND flash */
-#define	BALLOON3_NAND_BASE		(PXA_CS4_PHYS + 0x00e00000)
-#define	BALLOON3_NAND_IO_REG		(BALLOON3_FPGA_VIRT + 0x00e00000)
-#define	BALLOON3_NAND_CONTROL2_REG	(BALLOON3_FPGA_VIRT + 0x00e00010)
-#define	BALLOON3_NAND_STAT_REG		(BALLOON3_FPGA_VIRT + 0x00e00014)
-#define	BALLOON3_NAND_CONTROL_REG	(BALLOON3_FPGA_VIRT + 0x00e00014)
-
-/* fpga/cpld interrupt control register */
-#define BALLOON3_INT_CONTROL_REG	(BALLOON3_FPGA_VIRT + 0x00e0000C)
-#define BALLOON3_VERSION_REG		(BALLOON3_FPGA_VIRT + 0x00e0001c)
-
-#define BALLOON3_SAMOSA_ADDR_REG	(BALLOON3_FPGA_VIRT + 0x00c00000)
-#define BALLOON3_SAMOSA_DATA_REG	(BALLOON3_FPGA_VIRT + 0x00c00004)
-#define BALLOON3_SAMOSA_STATUS_REG	(BALLOON3_FPGA_VIRT + 0x00c0001c)
-
-/* CF Status Register bits (read-only) bits */
-#define BALLOON3_CF_nIRQ		(1 << 0)
-#define BALLOON3_CF_nSTSCHG_BVD1	(1 << 1)
-
-/* CF Control Set Register bits / CF Control Clear Register bits (write-only) */
-#define BALLOON3_CF_RESET		(1 << 0)
-#define BALLOON3_CF_ENABLE		(1 << 1)
-#define BALLOON3_CF_ADD_ENABLE		(1 << 2)
-
-/* CF Interrupt sources */
-#define BALLOON3_BP_CF_NRDY_IRQ		BALLOON3_IRQ(0)
-#define BALLOON3_BP_NSTSCHG_IRQ		BALLOON3_IRQ(1)
-
-/* NAND Control register */
-#define	BALLOON3_NAND_CONTROL_FLWP	(1 << 7)
-#define	BALLOON3_NAND_CONTROL_FLSE	(1 << 6)
-#define	BALLOON3_NAND_CONTROL_FLCE3	(1 << 5)
-#define	BALLOON3_NAND_CONTROL_FLCE2	(1 << 4)
-#define	BALLOON3_NAND_CONTROL_FLCE1	(1 << 3)
-#define	BALLOON3_NAND_CONTROL_FLCE0	(1 << 2)
-#define	BALLOON3_NAND_CONTROL_FLALE	(1 << 1)
-#define	BALLOON3_NAND_CONTROL_FLCLE	(1 << 0)
-
-/* NAND Status register */
-#define	BALLOON3_NAND_STAT_RNB		(1 << 0)
-
-/* NAND Control2 register */
-#define	BALLOON3_NAND_CONTROL2_16BIT	(1 << 0)
-
-/* GPIOs for irqs */
-#define BALLOON3_GPIO_AUX_NIRQ		(94)
-#define BALLOON3_GPIO_CODEC_IRQ		(95)
-
-/* Timer and Idle LED locations */
-#define BALLOON3_GPIO_LED_NAND		(9)
-#define BALLOON3_GPIO_LED_IDLE		(10)
-
-/* backlight control */
-#define BALLOON3_GPIO_RUN_BACKLIGHT	(99)
-
-#define BALLOON3_GPIO_S0_CD		(105)
-
-/* NAND */
-#define BALLOON3_GPIO_RUN_NAND		(102)
-
-/* PCF8574A Leds */
-#define	BALLOON3_PCF_GPIO_BASE		160
-#define	BALLOON3_PCF_GPIO_LED0		(BALLOON3_PCF_GPIO_BASE + 0)
-#define	BALLOON3_PCF_GPIO_LED1		(BALLOON3_PCF_GPIO_BASE + 1)
-#define	BALLOON3_PCF_GPIO_LED2		(BALLOON3_PCF_GPIO_BASE + 2)
-#define	BALLOON3_PCF_GPIO_LED3		(BALLOON3_PCF_GPIO_BASE + 3)
-#define	BALLOON3_PCF_GPIO_LED4		(BALLOON3_PCF_GPIO_BASE + 4)
-#define	BALLOON3_PCF_GPIO_LED5		(BALLOON3_PCF_GPIO_BASE + 5)
-#define	BALLOON3_PCF_GPIO_LED6		(BALLOON3_PCF_GPIO_BASE + 6)
-#define	BALLOON3_PCF_GPIO_LED7		(BALLOON3_PCF_GPIO_BASE + 7)
-
-/* FPGA Interrupt Mask/Acknowledge Register */
-#define BALLOON3_INT_S0_IRQ		(1 << 0)  /* PCMCIA 0 IRQ */
-#define BALLOON3_INT_S0_STSCHG		(1 << 1)  /* PCMCIA 0 status changed */
-
-/* CPLD (and FPGA) interface definitions */
-#define CPLD_LCD0_DATA_SET             0x00
-#define CPLD_LCD0_DATA_CLR             0x10
-#define CPLD_LCD0_COMMAND_SET          0x01
-#define CPLD_LCD0_COMMAND_CLR          0x11
-#define CPLD_LCD1_DATA_SET             0x02
-#define CPLD_LCD1_DATA_CLR             0x12
-#define CPLD_LCD1_COMMAND_SET          0x03
-#define CPLD_LCD1_COMMAND_CLR          0x13
-
-#define CPLD_MISC_SET                  0x07
-#define CPLD_MISC_CLR                  0x17
-#define CPLD_MISC_LOON_NRESET_BIT      0
-#define CPLD_MISC_LOON_UNSUSP_BIT      1
-#define CPLD_MISC_RUN_5V_BIT           2
-#define CPLD_MISC_CHG_D0_BIT           3
-#define CPLD_MISC_CHG_D1_BIT           4
-#define CPLD_MISC_DAC_NCS_BIT          5
-
-#define CPLD_LCD_SET                   0x08
-#define CPLD_LCD_CLR                   0x18
-#define CPLD_LCD_BACKLIGHT_EN_0_BIT    0
-#define CPLD_LCD_BACKLIGHT_EN_1_BIT    1
-#define CPLD_LCD_LED_RED_BIT           4
-#define CPLD_LCD_LED_GREEN_BIT         5
-#define CPLD_LCD_NRESET_BIT            7
-
-#define CPLD_LCD_RO_SET                0x09
-#define CPLD_LCD_RO_CLR                0x19
-#define CPLD_LCD_RO_LCD0_nWAIT_BIT     0
-#define CPLD_LCD_RO_LCD1_nWAIT_BIT     1
-
-#define CPLD_SERIAL_SET                0x0a
-#define CPLD_SERIAL_CLR                0x1a
-#define CPLD_SERIAL_GSM_RI_BIT         0
-#define CPLD_SERIAL_GSM_CTS_BIT        1
-#define CPLD_SERIAL_GSM_DTR_BIT        2
-#define CPLD_SERIAL_LPR_CTS_BIT        3
-#define CPLD_SERIAL_TC232_CTS_BIT      4
-#define CPLD_SERIAL_TC232_DSR_BIT      5
-
-#define CPLD_SROUTING_SET              0x0b
-#define CPLD_SROUTING_CLR              0x1b
-#define CPLD_SROUTING_MSP430_LPR       0
-#define CPLD_SROUTING_MSP430_TC232     1
-#define CPLD_SROUTING_MSP430_GSM       2
-#define CPLD_SROUTING_LOON_LPR         (0 << 4)
-#define CPLD_SROUTING_LOON_TC232       (1 << 4)
-#define CPLD_SROUTING_LOON_GSM         (2 << 4)
-
-#define CPLD_AROUTING_SET              0x0c
-#define CPLD_AROUTING_CLR              0x1c
-#define CPLD_AROUTING_MIC2PHONE_BIT    0
-#define CPLD_AROUTING_PHONE2INT_BIT    1
-#define CPLD_AROUTING_PHONE2EXT_BIT    2
-#define CPLD_AROUTING_LOONL2INT_BIT    3
-#define CPLD_AROUTING_LOONL2EXT_BIT    4
-#define CPLD_AROUTING_LOONR2PHONE_BIT  5
-#define CPLD_AROUTING_LOONR2INT_BIT    6
-#define CPLD_AROUTING_LOONR2EXT_BIT    7
-
-/* Balloon3 Interrupts */
-#define BALLOON3_IRQ(x)		(IRQ_BOARD_START + (x))
-
-#define BALLOON3_AUX_NIRQ	PXA_GPIO_TO_IRQ(BALLOON3_GPIO_AUX_NIRQ)
-#define BALLOON3_CODEC_IRQ	PXA_GPIO_TO_IRQ(BALLOON3_GPIO_CODEC_IRQ)
-
-#define BALLOON3_NR_IRQS	(IRQ_BOARD_START + 16)
-
-extern int balloon3_has(enum balloon3_features feature);
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/bitfield.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/bitfield.h
deleted file mode 100644
index f1f0e338..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/bitfield.h
+++ /dev/null
@@ -1,113 +0,0 @@
-/*
- *	FILE    	bitfield.h
- *
- *	Version 	1.1
- *	Author  	Copyright (c) Marc A. Viredaz, 1998
- *	        	DEC Western Research Laboratory, Palo Alto, CA
- *	Date    	April 1998 (April 1997)
- *	System  	Advanced RISC Machine (ARM)
- *	Language	C or ARM Assembly
- *	Purpose 	Definition of macros to operate on bit fields.
- */
-
-
-
-#ifndef __BITFIELD_H
-#define __BITFIELD_H
-
-#ifndef __ASSEMBLY__
-#define UData(Data)	((unsigned long) (Data))
-#else
-#define UData(Data)	(Data)
-#endif
-
-
-/*
- * MACRO: Fld
- *
- * Purpose
- *    The macro "Fld" encodes a bit field, given its size and its shift value
- *    with respect to bit 0.
- *
- * Note
- *    A more intuitive way to encode bit fields would have been to use their
- *    mask. However, extracting size and shift value information from a bit
- *    field's mask is cumbersome and might break the assembler (255-character
- *    line-size limit).
- *
- * Input
- *    Size      	Size of the bit field, in number of bits.
- *    Shft      	Shift value of the bit field with respect to bit 0.
- *
- * Output
- *    Fld       	Encoded bit field.
- */
-
-#define Fld(Size, Shft)	(((Size) << 16) + (Shft))
-
-
-/*
- * MACROS: FSize, FShft, FMsk, FAlnMsk, F1stBit
- *
- * Purpose
- *    The macros "FSize", "FShft", "FMsk", "FAlnMsk", and "F1stBit" return
- *    the size, shift value, mask, aligned mask, and first bit of a
- *    bit field.
- *
- * Input
- *    Field     	Encoded bit field (using the macro "Fld").
- *
- * Output
- *    FSize     	Size of the bit field, in number of bits.
- *    FShft     	Shift value of the bit field with respect to bit 0.
- *    FMsk      	Mask for the bit field.
- *    FAlnMsk   	Mask for the bit field, aligned on bit 0.
- *    F1stBit   	First bit of the bit field.
- */
-
-#define FSize(Field)	((Field) >> 16)
-#define FShft(Field)	((Field) & 0x0000FFFF)
-#define FMsk(Field)	(((UData (1) << FSize (Field)) - 1) << FShft (Field))
-#define FAlnMsk(Field)	((UData (1) << FSize (Field)) - 1)
-#define F1stBit(Field)	(UData (1) << FShft (Field))
-
-
-/*
- * MACRO: FInsrt
- *
- * Purpose
- *    The macro "FInsrt" inserts a value into a bit field by shifting the
- *    former appropriately.
- *
- * Input
- *    Value     	Bit-field value.
- *    Field     	Encoded bit field (using the macro "Fld").
- *
- * Output
- *    FInsrt    	Bit-field value positioned appropriately.
- */
-
-#define FInsrt(Value, Field) \
-                	(UData (Value) << FShft (Field))
-
-
-/*
- * MACRO: FExtr
- *
- * Purpose
- *    The macro "FExtr" extracts the value of a bit field by masking and
- *    shifting it appropriately.
- *
- * Input
- *    Data      	Data containing the bit-field to be extracted.
- *    Field     	Encoded bit field (using the macro "Fld").
- *
- * Output
- *    FExtr     	Bit-field value.
- */
-
-#define FExtr(Data, Field) \
-                	((UData (Data) >> FShft (Field)) & FAlnMsk (Field))
-
-
-#endif /* __BITFIELD_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/camera.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/camera.h
deleted file mode 100644
index 6709b1cd..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/camera.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
-    camera.h - PXA camera driver header file
-
-    Copyright (C) 2003, Intel Corporation
-    Copyright (C) 2008, Guennadi Liakhovetski <kernel@pengutronix.de>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#ifndef __ASM_ARCH_CAMERA_H_
-#define __ASM_ARCH_CAMERA_H_
-
-#define PXA_CAMERA_MASTER	1
-#define PXA_CAMERA_DATAWIDTH_4	2
-#define PXA_CAMERA_DATAWIDTH_5	4
-#define PXA_CAMERA_DATAWIDTH_8	8
-#define PXA_CAMERA_DATAWIDTH_9	0x10
-#define PXA_CAMERA_DATAWIDTH_10	0x20
-#define PXA_CAMERA_PCLK_EN	0x40
-#define PXA_CAMERA_MCLK_EN	0x80
-#define PXA_CAMERA_PCP		0x100
-#define PXA_CAMERA_HSP		0x200
-#define PXA_CAMERA_VSP		0x400
-
-struct pxacamera_platform_data {
-	unsigned long flags;
-	unsigned long mclk_10khz;
-};
-
-extern void pxa_set_camera_info(struct pxacamera_platform_data *);
-
-#endif /* __ASM_ARCH_CAMERA_H_ */
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/colibri.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/colibri.h
deleted file mode 100644
index cb4236e9..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/colibri.h
+++ /dev/null
@@ -1,69 +0,0 @@
-#ifndef _COLIBRI_H_
-#define _COLIBRI_H_
-
-#include <net/ax88796.h>
-#include <mach/mfp.h>
-
-/*
- * base board glue for PXA270 module
- */
-
-enum {
-	COLIBRI_EVALBOARD = 0,
-	COLIBRI_PXA270_INCOME,
-};
-
-#if defined(CONFIG_MACH_COLIBRI_EVALBOARD)
-extern void colibri_evalboard_init(void);
-#else
-static inline void colibri_evalboard_init(void) {}
-#endif
-
-#if defined(CONFIG_MACH_COLIBRI_PXA270_INCOME)
-extern void colibri_pxa270_income_boardinit(void);
-#else
-static inline void colibri_pxa270_income_boardinit(void) {}
-#endif
-
-/*
- * common settings for all modules
- */
-
-#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
-extern void colibri_pxa3xx_init_mmc(mfp_cfg_t *pins, int len, int detect_pin);
-#else
-static inline void colibri_pxa3xx_init_mmc(mfp_cfg_t *pins, int len, int detect_pin) {}
-#endif
-
-#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
-extern void colibri_pxa3xx_init_lcd(int bl_pin);
-#else
-static inline void colibri_pxa3xx_init_lcd(int bl_pin) {}
-#endif
-
-#if defined(CONFIG_AX88796)
-extern void colibri_pxa3xx_init_eth(struct ax_plat_data *plat_data);
-#endif
-
-#if defined(CONFIG_MTD_NAND_PXA3xx) || defined(CONFIG_MTD_NAND_PXA3xx_MODULE)
-extern void colibri_pxa3xx_init_nand(void);
-#else
-static inline void colibri_pxa3xx_init_nand(void) {}
-#endif
-
-/* physical memory regions */
-#define COLIBRI_SDRAM_BASE	0xa0000000      /* SDRAM region */
-
-/* GPIO definitions for Colibri PXA270 */
-#define GPIO114_COLIBRI_PXA270_ETH_IRQ	114
-#define GPIO0_COLIBRI_PXA270_SD_DETECT	0
-#define GPIO113_COLIBRI_PXA270_TS_IRQ	113
-
-/* GPIO definitions for Colibri PXA300/310 */
-#define GPIO13_COLIBRI_PXA300_SD_DETECT	13
-
-/* GPIO definitions for Colibri PXA320 */
-#define GPIO28_COLIBRI_PXA320_SD_DETECT	28
-
-#endif /* _COLIBRI_H_ */
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/corgi.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/corgi.h
deleted file mode 100644
index f3c3493b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/corgi.h
+++ /dev/null
@@ -1,113 +0,0 @@
-/*
- * Hardware specific definitions for SL-C7xx series of PDAs
- *
- * Copyright (c) 2004-2005 Richard Purdie
- *
- * Based on Sharp's 2.4 kernel patches
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-#ifndef __ASM_ARCH_CORGI_H
-#define __ASM_ARCH_CORGI_H  1
-
-
-/*
- * Corgi (Non Standard) GPIO Definitions
- */
-#define CORGI_GPIO_KEY_INT			(0)	/* Keyboard Interrupt */
-#define CORGI_GPIO_AC_IN			(1) /* Charger Detection */
-#define CORGI_GPIO_WAKEUP			(3) /* System wakeup notification? */
-#define CORGI_GPIO_AK_INT			(4)	/* Headphone Jack Control Interrupt */
-#define CORGI_GPIO_TP_INT			(5)	/* Touch Panel Interrupt */
-#define CORGI_GPIO_nSD_WP			(7) /* SD Write Protect? */
-#define CORGI_GPIO_nSD_DETECT		(9) /* MMC/SD Card Detect */
-#define CORGI_GPIO_nSD_INT			(10) /* SD Interrupt for SDIO? */
-#define CORGI_GPIO_MAIN_BAT_LOW		(11) /* Main Battery Low Notification */
-#define CORGI_GPIO_BAT_COVER		(11) /* Battery Cover Detect */
-#define CORGI_GPIO_LED_ORANGE		(13) /* Orange LED Control */
-#define CORGI_GPIO_CF_CD			(14) /* Compact Flash Card Detect */
-#define CORGI_GPIO_CHRG_FULL		(16) /* Charging Complete Notification */
-#define CORGI_GPIO_CF_IRQ			(17) /* Compact Flash Interrupt */
-#define CORGI_GPIO_LCDCON_CS		(19) /* LCD Control Chip Select */
-#define CORGI_GPIO_MAX1111_CS		(20) /* MAX1111 Chip Select */
-#define CORGI_GPIO_ADC_TEMP_ON		(21) /* Select battery voltage or temperature */
-#define CORGI_GPIO_IR_ON			(22) /* Enable IR Transceiver */
-#define CORGI_GPIO_ADS7846_CS		(24) /* ADS7846 Chip Select */
-#define CORGI_GPIO_SD_PWR			(33) /* MMC/SD Power */
-#define CORGI_GPIO_CHRG_ON			(38) /* Enable battery Charging */
-#define CORGI_GPIO_DISCHARGE_ON		(42) /* Enable battery Discharge */
-#define CORGI_GPIO_CHRG_UKN			(43) /* Unknown Charging (Bypass Control?) */
-#define CORGI_GPIO_HSYNC			(44) /* LCD HSync Pulse */
-#define CORGI_GPIO_USB_PULLUP		(45) /* USB show presence to host */
-
-
-/*
- * Corgi Keyboard Definitions
- */
-#define CORGI_KEY_STROBE_NUM		(12)
-#define CORGI_KEY_SENSE_NUM			(8)
-#define CORGI_GPIO_ALL_STROBE_BIT	(0x00003ffc)
-#define CORGI_GPIO_HIGH_SENSE_BIT	(0xfc000000)
-#define CORGI_GPIO_HIGH_SENSE_RSHIFT	(26)
-#define CORGI_GPIO_LOW_SENSE_BIT	(0x00000003)
-#define CORGI_GPIO_LOW_SENSE_LSHIFT	(6)
-#define CORGI_GPIO_STROBE_BIT(a)	GPIO_bit(66+(a))
-#define CORGI_GPIO_SENSE_BIT(a)		GPIO_bit(58+(a))
-#define CORGI_GAFR_ALL_STROBE_BIT	(0x0ffffff0)
-#define CORGI_GAFR_HIGH_SENSE_BIT	(0xfff00000)
-#define CORGI_GAFR_LOW_SENSE_BIT	(0x0000000f)
-#define CORGI_GPIO_KEY_SENSE(a)		(58+(a))
-#define CORGI_GPIO_KEY_STROBE(a)	(66+(a))
-
-
-/*
- * Corgi Interrupts
- */
-#define CORGI_IRQ_GPIO_KEY_INT		PXA_GPIO_TO_IRQ(0)
-#define CORGI_IRQ_GPIO_AC_IN		PXA_GPIO_TO_IRQ(1)
-#define CORGI_IRQ_GPIO_WAKEUP		PXA_GPIO_TO_IRQ(3)
-#define CORGI_IRQ_GPIO_AK_INT		PXA_GPIO_TO_IRQ(4)
-#define CORGI_IRQ_GPIO_TP_INT		PXA_GPIO_TO_IRQ(5)
-#define CORGI_IRQ_GPIO_nSD_DETECT	PXA_GPIO_TO_IRQ(9)
-#define CORGI_IRQ_GPIO_nSD_INT		PXA_GPIO_TO_IRQ(10)
-#define CORGI_IRQ_GPIO_MAIN_BAT_LOW	PXA_GPIO_TO_IRQ(11)
-#define CORGI_IRQ_GPIO_CF_CD		PXA_GPIO_TO_IRQ(14)
-#define CORGI_IRQ_GPIO_CHRG_FULL	PXA_GPIO_TO_IRQ(16)	/* Battery fully charged */
-#define CORGI_IRQ_GPIO_CF_IRQ		PXA_GPIO_TO_IRQ(17)
-#define CORGI_IRQ_GPIO_KEY_SENSE(a)	PXA_GPIO_TO_IRQ(58+(a))	/* Keyboard Sense lines */
-
-
-/*
- * Corgi SCOOP GPIOs and Config
- */
-#define CORGI_SCP_LED_GREEN		SCOOP_GPCR_PA11
-#define CORGI_SCP_SWA			SCOOP_GPCR_PA12  /* Hinge Switch A */
-#define CORGI_SCP_SWB			SCOOP_GPCR_PA13  /* Hinge Switch B */
-#define CORGI_SCP_MUTE_L		SCOOP_GPCR_PA14
-#define CORGI_SCP_MUTE_R		SCOOP_GPCR_PA15
-#define CORGI_SCP_AKIN_PULLUP	SCOOP_GPCR_PA16
-#define CORGI_SCP_APM_ON		SCOOP_GPCR_PA17
-#define CORGI_SCP_BACKLIGHT_CONT	SCOOP_GPCR_PA18
-#define CORGI_SCP_MIC_BIAS		SCOOP_GPCR_PA19
-
-#define CORGI_SCOOP_IO_DIR	( CORGI_SCP_LED_GREEN | CORGI_SCP_MUTE_L | CORGI_SCP_MUTE_R | \
-			CORGI_SCP_AKIN_PULLUP | CORGI_SCP_APM_ON | CORGI_SCP_BACKLIGHT_CONT | \
-			CORGI_SCP_MIC_BIAS )
-#define CORGI_SCOOP_IO_OUT	( CORGI_SCP_MUTE_L | CORGI_SCP_MUTE_R )
-
-#define CORGI_SCOOP_GPIO_BASE		(PXA_NR_BUILTIN_GPIO)
-#define CORGI_GPIO_LED_GREEN		(CORGI_SCOOP_GPIO_BASE + 0)
-#define CORGI_GPIO_SWA			(CORGI_SCOOP_GPIO_BASE + 1)  /* Hinge Switch A */
-#define CORGI_GPIO_SWB			(CORGI_SCOOP_GPIO_BASE + 2)  /* Hinge Switch B */
-#define CORGI_GPIO_MUTE_L		(CORGI_SCOOP_GPIO_BASE + 3)
-#define CORGI_GPIO_MUTE_R		(CORGI_SCOOP_GPIO_BASE + 4)
-#define CORGI_GPIO_AKIN_PULLUP		(CORGI_SCOOP_GPIO_BASE + 5)
-#define CORGI_GPIO_APM_ON		(CORGI_SCOOP_GPIO_BASE + 6)
-#define CORGI_GPIO_BACKLIGHT_CONT	(CORGI_SCOOP_GPIO_BASE + 7)
-#define CORGI_GPIO_MIC_BIAS		(CORGI_SCOOP_GPIO_BASE + 8)
-
-#endif /* __ASM_ARCH_CORGI_H  */
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/csb726.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/csb726.h
deleted file mode 100644
index 2628e7b7..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/csb726.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- *  Support for Cogent CSB726
- *
- *  Copyright (c) 2008 Dmitry Baryshkov
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- *
- */
-#ifndef CSB726_H
-#define CSB726_H
-
-#define CSB726_GPIO_IRQ_LAN	52
-#define CSB726_GPIO_IRQ_SM501	53
-#define CSB726_GPIO_MMC_DETECT	100
-#define CSB726_GPIO_MMC_RO	101
-
-#define CSB726_FLASH_SIZE	(64 * 1024 * 1024)
-#define CSB726_FLASH_uMON	(8 * 1024 * 1024)
-
-#define CSB726_IRQ_LAN		PXA_GPIO_TO_IRQ(CSB726_GPIO_IRQ_LAN)
-#define CSB726_IRQ_SM501	PXA_GPIO_TO_IRQ(CSB726_GPIO_IRQ_SM501)
-
-#endif
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/debug-macro.S b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/debug-macro.S
deleted file mode 100644
index 70b112e8..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/debug-macro.S
+++ /dev/null
@@ -1,23 +0,0 @@
-/* arch/arm/mach-pxa/include/mach/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-#include "hardware.h"
-
-		.macro	addruart, rp, rv, tmp
-		mov	\rp, #0x00100000
-		orr	\rv, \rp, #io_p2v(0x40000000)	@ virtual
-		orr	\rp, \rp, #0x40000000		@ physical
-		.endm
-
-#define UART_SHIFT	2
-#include <asm/hardware/debug-8250.S>
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/dma.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/dma.h
deleted file mode 100644
index 5bd55894..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/dma.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- *  arch/arm/mach-pxa/include/mach/dma.h
- *
- *  Author:	Nicolas Pitre
- *  Created:	Jun 15, 2001
- *  Copyright:	MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H
-
-#include <mach/hardware.h>
-
-/* DMA Controller Registers Definitions */
-#define DMAC_REGS_VIRT	io_p2v(0x40000000)
-
-#include <plat/dma.h>
-#endif /* _ASM_ARCH_DMA_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/eseries-gpio.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/eseries-gpio.h
deleted file mode 100644
index f3e55098..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/eseries-gpio.h
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- *  eseries-gpio.h
- *
- *  Copyright (C) Ian Molton <spyro@f2s.com>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- *
- */
-
-/* e-series power button */
-#define GPIO_ESERIES_POWERBTN     0
-
-/* UDC GPIO definitions */
-#define GPIO_E7XX_USB_DISC       13
-#define GPIO_E7XX_USB_PULLUP      3
-
-#define GPIO_E800_USB_DISC        4
-#define GPIO_E800_USB_PULLUP     84
-
-/* e740 PCMCIA GPIO definitions */
-/* Note: PWR1 seems to be inverted */
-#define GPIO_E740_PCMCIA_CD0      8
-#define GPIO_E740_PCMCIA_CD1     44
-#define GPIO_E740_PCMCIA_RDY0    11
-#define GPIO_E740_PCMCIA_RDY1     6
-#define GPIO_E740_PCMCIA_RST0    27
-#define GPIO_E740_PCMCIA_RST1    24
-#define GPIO_E740_PCMCIA_PWR0    20
-#define GPIO_E740_PCMCIA_PWR1    23
-
-/* e750 PCMCIA GPIO definitions */
-#define GPIO_E750_PCMCIA_CD0      8
-#define GPIO_E750_PCMCIA_RDY0    12
-#define GPIO_E750_PCMCIA_RST0    27
-#define GPIO_E750_PCMCIA_PWR0    20
-
-/* e800 PCMCIA GPIO definitions */
-#define GPIO_E800_PCMCIA_RST0    69
-#define GPIO_E800_PCMCIA_RST1    72
-#define GPIO_E800_PCMCIA_PWR0    20
-#define GPIO_E800_PCMCIA_PWR1    73
-
-/* e7xx IrDA power control */
-#define GPIO_E7XX_IR_OFF         38
-
-/* e740 audio control GPIOs */
-#define GPIO_E740_WM9705_nAVDD2  16
-#define GPIO_E740_MIC_ON         40
-#define GPIO_E740_AMP_ON         41
-
-/* e750 audio control GPIOs */
-#define GPIO_E750_HP_AMP_OFF      4
-#define GPIO_E750_SPK_AMP_OFF     7
-#define GPIO_E750_HP_DETECT      37
-
-/* e800 audio control GPIOs */
-#define GPIO_E800_HP_DETECT      81
-#define GPIO_E800_HP_AMP_OFF     82
-#define GPIO_E800_SPK_AMP_ON     83
-
-/* ASIC related GPIOs */
-#define GPIO_ESERIES_TMIO_IRQ        5
-#define GPIO_ESERIES_TMIO_PCLR      19
-#define GPIO_ESERIES_TMIO_SUSPEND   45
-#define GPIO_E800_ANGELX_IRQ      8
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/eseries-irq.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/eseries-irq.h
deleted file mode 100644
index de292b26..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/eseries-irq.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- *  eseries-irq.h
- *
- *  Copyright (C) Ian Molton <spyro@f2s.com>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- *
- */
-
-#define ANGELX_IRQ_BASE (IRQ_BOARD_START+8)
-#define IRQ_ANGELX(n) (ANGELX_IRQ_BASE + (n))
-
-#define ANGELX_RDY0_IRQ IRQ_ANGELX(0)
-#define ANGELX_ST0_IRQ  IRQ_ANGELX(1)
-#define ANGELX_CD0_IRQ  IRQ_ANGELX(2)
-#define ANGELX_RDY1_IRQ IRQ_ANGELX(3)
-#define ANGELX_ST1_IRQ  IRQ_ANGELX(4)
-#define ANGELX_CD1_IRQ  IRQ_ANGELX(5)
-
-#define TMIO_IRQ_BASE (IRQ_BOARD_START+0)
-#define IRQ_TMIO(n) (TMIO_IRQ_BASE + (n))
-
-#define TMIO_SD_IRQ     IRQ_TMIO(1)
-#define TMIO_USB_IRQ    IRQ_TMIO(2)
-
-#define ESERIES_NR_IRQS	(IRQ_BOARD_START + 16)
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/gpio.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/gpio.h
deleted file mode 100644
index 0248e433..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/gpio.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * arch/arm/mach-pxa/include/mach/gpio.h
- *
- * PXA GPIO wrappers for arch-neutral GPIO calls
- *
- * Written by Philipp Zabel <philipp.zabel@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-#ifndef __ASM_ARCH_PXA_GPIO_H
-#define __ASM_ARCH_PXA_GPIO_H
-
-#include <asm-generic/gpio.h>
-
-#include <mach/irqs.h>
-#include <mach/hardware.h>
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/gumstix.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/gumstix.h
deleted file mode 100644
index dba14b65..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/gumstix.h
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- *  arch/arm/mach-pxa/include/mach/gumstix.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-
-/* BTRESET - Reset line to Bluetooth module, active low signal. */
-#define GPIO_GUMSTIX_BTRESET          7
-#define GPIO_GUMSTIX_BTRESET_MD		(GPIO_GUMSTIX_BTRESET | GPIO_OUT)
-
-
-/*
-GPIOn - Input from MAX823 (or equiv), normalizing USB +5V into a clean
-interrupt signal for determining cable presence. On the gumstix F,
-this moves to GPIO17 and GPIO37. */
-
-/* GPIOx - Connects to USB D+ and used as a pull-up after GPIOn
-has detected a cable insertion; driven low otherwise. */
-
-#define GPIO_GUMSTIX_USB_GPIOn		35
-#define GPIO_GUMSTIX_USB_GPIOx		41
-
-/* usb state change */
-#define GUMSTIX_USB_INTR_IRQ		PXA_GPIO_TO_IRQ(GPIO_GUMSTIX_USB_GPIOn)
-
-#define GPIO_GUMSTIX_USB_GPIOn_MD	(GPIO_GUMSTIX_USB_GPIOn | GPIO_IN)
-#define GPIO_GUMSTIX_USB_GPIOx_CON_MD	(GPIO_GUMSTIX_USB_GPIOx | GPIO_OUT)
-#define GPIO_GUMSTIX_USB_GPIOx_DIS_MD	(GPIO_GUMSTIX_USB_GPIOx | GPIO_IN)
-
-/*
- * SD/MMC definitions
- */
-#define GUMSTIX_GPIO_nSD_WP		22 /* SD Write Protect */
-#define GUMSTIX_GPIO_nSD_DETECT		11 /* MMC/SD Card Detect */
-#define GUMSTIX_IRQ_GPIO_nSD_DETECT	PXA_GPIO_TO_IRQ(GUMSTIX_GPIO_nSD_DETECT)
-
-/*
- * SMC Ethernet definitions
- * ETH_RST provides a hardware reset line to the ethernet chip
- * ETH is the IRQ line in from the ethernet chip to the PXA
- */
-#define GPIO_GUMSTIX_ETH0_RST		80
-#define GPIO_GUMSTIX_ETH0_RST_MD	(GPIO_GUMSTIX_ETH0_RST | GPIO_OUT)
-#define GPIO_GUMSTIX_ETH1_RST		52
-#define GPIO_GUMSTIX_ETH1_RST_MD	(GPIO_GUMSTIX_ETH1_RST | GPIO_OUT)
-
-#define GPIO_GUMSTIX_ETH0		36
-#define GPIO_GUMSTIX_ETH0_MD		(GPIO_GUMSTIX_ETH0 | GPIO_IN)
-#define GUMSTIX_ETH0_IRQ		PXA_GPIO_TO_IRQ(GPIO_GUMSTIX_ETH0)
-#define GPIO_GUMSTIX_ETH1		27
-#define GPIO_GUMSTIX_ETH1_MD		(GPIO_GUMSTIX_ETH1 | GPIO_IN)
-#define GUMSTIX_ETH1_IRQ		PXA_GPIO_TO_IRQ(GPIO_GUMSTIX_ETH1)
-
-
-/* CF reset line */
-#define GPIO8_RESET			8
-
-/* CF slot 0 */
-#define GPIO4_nBVD1			4
-#define GPIO4_nSTSCHG			GPIO4_nBVD1
-#define GPIO11_nCD			11
-#define GPIO26_PRDY_nBSY		26
-#define GUMSTIX_S0_nSTSCHG_IRQ		PXA_GPIO_TO_IRQ(GPIO4_nSTSCHG)
-#define GUMSTIX_S0_nCD_IRQ		PXA_GPIO_TO_IRQ(GPIO11_nCD)
-#define GUMSTIX_S0_PRDY_nBSY_IRQ	PXA_GPIO_TO_IRQ(GPIO26_PRDY_nBSY)
-
-/* CF slot 1 */
-#define GPIO18_nBVD1			18
-#define GPIO18_nSTSCHG			GPIO18_nBVD1
-#define GPIO36_nCD			36
-#define GPIO27_PRDY_nBSY		27
-#define GUMSTIX_S1_nSTSCHG_IRQ		PXA_GPIO_TO_IRQ(GPIO18_nSTSCHG)
-#define GUMSTIX_S1_nCD_IRQ		PXA_GPIO_TO_IRQ(GPIO36_nCD)
-#define GUMSTIX_S1_PRDY_nBSY_IRQ	PXA_GPIO_TO_IRQ(GPIO27_PRDY_nBSY)
-
-/* CF GPIO line modes */
-#define GPIO4_nSTSCHG_MD		(GPIO4_nSTSCHG | GPIO_IN)
-#define GPIO8_RESET_MD			(GPIO8_RESET | GPIO_OUT)
-#define GPIO11_nCD_MD			(GPIO11_nCD | GPIO_IN)
-#define GPIO18_nSTSCHG_MD		(GPIO18_nSTSCHG | GPIO_IN)
-#define GPIO26_PRDY_nBSY_MD		(GPIO26_PRDY_nBSY | GPIO_IN)
-#define GPIO27_PRDY_nBSY_MD		(GPIO27_PRDY_nBSY | GPIO_IN)
-#define GPIO36_nCD_MD			(GPIO36_nCD | GPIO_IN)
-
-/* for expansion boards that can't be programatically detected */
-extern int am200_init(void);
-extern int am300_init(void);
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/h5000.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/h5000.h
deleted file mode 100644
index 2a5ae380..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/h5000.h
+++ /dev/null
@@ -1,113 +0,0 @@
-/*
- * Hardware definitions for HP iPAQ h5xxx Handheld Computers
- *
- * Copyright(20)02 Hewlett-Packard Company.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * COMPAQ COMPUTER CORPORATION MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
- * AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS
- * FITNESS FOR ANY PARTICULAR PURPOSE.
- *
- * Author: Jamey Hicks
- */
-
-#ifndef __ASM_ARCH_H5000_H
-#define __ASM_ARCH_H5000_H
-
-#include <mach/mfp-pxa25x.h>
-
-/*
- * CPU GPIOs
- */
-
-#define H5000_GPIO_POWER_BUTTON   (0)
-#define H5000_GPIO_RESET_BUTTON_N (1)
-#define H5000_GPIO_OPT_INT        (2)
-#define H5000_GPIO_BACKUP_POWER   (3)
-#define H5000_GPIO_ACTION_BUTTON  (4)
-#define H5000_GPIO_COM_DCD_SOMETHING  (5) /* what is this really ? */
-/* 6 not connected */
-#define H5000_GPIO_RESET_BUTTON_AGAIN_N (7) /* connected to gpio 1 as well */
-/* 8 not connected */
-#define H5000_GPIO_RSO_N          (9)       /* reset output from max1702 which regulates 3.3 and 2.5 */
-#define H5000_GPIO_ASIC_INT_N   (10)       /* from companion asic */
-#define H5000_GPIO_BT_ENV_0     (11)       /* to LMX9814, set to 1 according to regdump */
-/*(12) not connected */
-#define H5000_GPIO_BT_ENV_1     (13)       /* to LMX9814, set to 1 according to regdump */
-#define H5000_GPIO_BT_WU        (14)       /* from LMX9814, Defined as HOST_WAKEUP in the LMX9820 data sheet */
-/*(15) is CS1# */
-/*(16) not connected */
-/*(17) not connected */
-/*(18) is pcmcia ready */
-/*(19) is dreq1 */
-/*(20) is dreq0 */
-#define H5000_GPIO_OE_RD_NWR	(21)       /* output enable on rd/nwr signal to companion asic */
-/*(22) is not connected */
-#define H5000_GPIO_OPT_SPI_CLK  (23)       /* to extension pack */
-#define H5000_GPIO_OPT_SPI_CS_N (24)       /* to extension pack */
-#define H5000_GPIO_OPT_SPI_DOUT (25)       /* to extension pack */
-#define H5000_GPIO_OPT_SPI_DIN  (26)       /* to extension pack */
-/*(27) not connected */
-#define H5000_GPIO_I2S_BITCLK   (28)       /* connected to AC97 codec */
-#define H5000_GPIO_I2S_DATAOUT  (29)       /* connected to AC97 codec */
-#define H5000_GPIO_I2S_DATAIN   (30)       /* connected to AC97 codec */
-#define H5000_GPIO_I2S_LRCLK    (31)       /* connected to AC97 codec */
-#define H5000_GPIO_I2S_SYSCLK   (32)       /* connected to AC97 codec */
-/*(33) is CS5# */
-#define H5000_GPIO_COM_RXD      (34)       /* connected to cradle/cable connector */
-#define H5000_GPIO_COM_CTS      (35)       /* connected to cradle/cable connector */
-#define H5000_GPIO_COM_DCD      (36)       /* connected to cradle/cable connector */
-#define H5000_GPIO_COM_DSR      (37)       /* connected to cradle/cable connector */
-#define H5000_GPIO_COM_RI       (38)       /* connected to cradle/cable connector */
-#define H5000_GPIO_COM_TXD      (39)       /* connected to cradle/cable connector */
-#define H5000_GPIO_COM_DTR      (40)       /* connected to cradle/cable connector */
-#define H5000_GPIO_COM_RTS      (41)       /* connected to cradle/cable connector */
-
-#define H5000_GPIO_BT_RXD       (42)       /* connected to BT (LMX9814) */
-#define H5000_GPIO_BT_TXD       (43)       /* connected to BT (LMX9814) */
-#define H5000_GPIO_BT_CTS       (44)       /* connected to BT (LMX9814) */
-#define H5000_GPIO_BT_RTS       (45)       /* connected to BT (LMX9814) */
-
-#define H5000_GPIO_IRDA_RXD     (46)
-#define H5000_GPIO_IRDA_TXD     (47)
-
-#define H5000_GPIO_POE_N        (48)       /* used for pcmcia */
-#define H5000_GPIO_PWE_N        (49)       /* used for pcmcia */
-#define H5000_GPIO_PIOR_N       (50)       /* used for pcmcia */
-#define H5000_GPIO_PIOW_N       (51)       /* used for pcmcia */
-#define H5000_GPIO_PCE1_N       (52)       /* used for pcmcia */
-#define H5000_GPIO_PCE2_N       (53)       /* used for pcmcia */
-#define H5000_GPIO_PSKTSEL      (54)       /* used for pcmcia */
-#define H5000_GPIO_PREG_N       (55)       /* used for pcmcia */
-#define H5000_GPIO_PWAIT_N      (56)       /* used for pcmcia */
-#define H5000_GPIO_IOIS16_N     (57)       /* used for pcmcia */
-
-#define H5000_GPIO_IRDA_SD      (58)       /* to hsdl3002 sd */
-/*(59) not connected */
-#define H5000_GPIO_POWER_SD_N   (60)       /* controls power to SD */
-#define H5000_GPIO_POWER_RS232_N	(61)       /* inverted FORCEON to rs232 transceiver */
-#define H5000_GPIO_POWER_ACCEL_N	(62)       /* controls power to accel */
-/*(63) is not connected */
-#define H5000_GPIO_OPT_NVRAM    (64)       /* controls power to expansion pack */
-#define H5000_GPIO_CHG_EN       (65)       /* to sc801 en */
-#define H5000_GPIO_USB_PULLUP   (66)       /* USB d+ pullup via 1.5K resistor */
-#define H5000_GPIO_BT_2V8_N     (67)       /* 2.8V used by bluetooth */
-#define H5000_GPIO_EXT_CHG_RATE (68)       /* enables external charging rate */
-/*(69) is not connected */
-#define H5000_GPIO_CIR_RESET    (70)       /* consumer IR reset */
-#define H5000_GPIO_POWER_LIGHT_SENSOR_N	(71)
-#define H5000_GPIO_BT_M_RESET   (72)
-#define H5000_GPIO_STD_CHG_RATE (73)
-#define H5000_GPIO_SD_WP_N      (74)
-#define H5000_GPIO_MOTOR_ON_N   (75)       /* external pullup on this */
-#define H5000_GPIO_HEADPHONE_DETECT	(76)
-#define H5000_GPIO_USB_CHG_RATE (77)       /* select rate for charging via usb */
-/*(78) is CS2# */
-/*(79) is CS3# */
-/*(80) is CS4# */
-
-#endif /* __ASM_ARCH_H5000_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/hardware.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/hardware.h
deleted file mode 100644
index 56d92e5c..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/hardware.h
+++ /dev/null
@@ -1,338 +0,0 @@
-/*
- *  arch/arm/mach-pxa/include/mach/hardware.h
- *
- *  Author:	Nicolas Pitre
- *  Created:	Jun 15, 2001
- *  Copyright:	MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include <mach/addr-map.h>
-
-/*
- * Workarounds for at least 2 errata so far require this.
- * The mapping is set in mach-pxa/generic.c.
- */
-#define UNCACHED_PHYS_0		0xff000000
-#define UNCACHED_ADDR		UNCACHED_PHYS_0
-
-/*
- * Intel PXA2xx internal register mapping:
- *
- * 0x40000000 - 0x41ffffff <--> 0xf2000000 - 0xf3ffffff
- * 0x44000000 - 0x45ffffff <--> 0xf4000000 - 0xf5ffffff
- * 0x48000000 - 0x49ffffff <--> 0xf6000000 - 0xf7ffffff
- * 0x4c000000 - 0x4dffffff <--> 0xf8000000 - 0xf9ffffff
- * 0x50000000 - 0x51ffffff <--> 0xfa000000 - 0xfbffffff
- * 0x54000000 - 0x55ffffff <--> 0xfc000000 - 0xfdffffff
- * 0x58000000 - 0x59ffffff <--> 0xfe000000 - 0xffffffff
- *
- * Note that not all PXA2xx chips implement all those addresses, and the
- * kernel only maps the minimum needed range of this mapping.
- */
-#define io_v2p(x) (0x3c000000 + ((x) & 0x01ffffff) + (((x) & 0x0e000000) << 1))
-#define io_p2v(x) IOMEM(0xf2000000 + ((x) & 0x01ffffff) + (((x) & 0x1c000000) >> 1))
-
-#ifndef __ASSEMBLY__
-# define __REG(x)	(*((volatile u32 __iomem *)io_p2v(x)))
-
-/* With indexed regs we don't want to feed the index through io_p2v()
-   especially if it is a variable, otherwise horrible code will result. */
-# define __REG2(x,y)	\
-	(*(volatile u32 __iomem*)((u32)&__REG(x) + (y)))
-
-# define __PREG(x)	(io_v2p((u32)&(x)))
-
-#else
-
-# define __REG(x)	io_p2v(x)
-# define __PREG(x)	io_v2p(x)
-
-#endif
-
-#ifndef __ASSEMBLY__
-
-#include <asm/cputype.h>
-
-/*
- *   CPU     Stepping     CPU_ID         JTAG_ID
- *
- *  PXA210	B0	0x69052922	0x2926C013
- *  PXA210	B1	0x69052923	0x3926C013
- *  PXA210	B2	0x69052924	0x4926C013
- *  PXA210	C0	0x69052D25	0x5926C013
- *
- *  PXA250	A0	0x69052100	0x09264013
- *  PXA250	A1	0x69052101	0x19264013
- *  PXA250	B0	0x69052902	0x29264013
- *  PXA250	B1	0x69052903	0x39264013
- *  PXA250	B2	0x69052904	0x49264013
- *  PXA250	C0	0x69052D05	0x59264013
- *
- *  PXA255	A0	0x69052D06	0x69264013
- *
- *  PXA26x	A0	0x69052903	0x39264013
- *  PXA26x	B0	0x69052D05	0x59264013
- *
- *  PXA27x	A0	0x69054110	0x09265013
- *  PXA27x	A1	0x69054111	0x19265013
- *  PXA27x	B0	0x69054112	0x29265013
- *  PXA27x	B1	0x69054113	0x39265013
- *  PXA27x	C0	0x69054114	0x49265013
- *  PXA27x	C5	0x69054117	0x79265013
- *
- *  PXA30x	A0	0x69056880	0x0E648013
- *  PXA30x	A1	0x69056881	0x1E648013
- *  PXA31x	A0	0x69056890	0x0E649013
- *  PXA31x	A1	0x69056891	0x1E649013
- *  PXA31x	A2	0x69056892	0x2E649013
- *  PXA32x	B1	0x69056825	0x5E642013
- *  PXA32x	B2	0x69056826	0x6E642013
- *
- *  PXA930	B0	0x69056835	0x5E643013
- *  PXA930	B1	0x69056837	0x7E643013
- *  PXA930	B2	0x69056838	0x8E643013
- *
- *  PXA935	A0	0x56056931	0x1E653013
- *  PXA935	B0	0x56056936	0x6E653013
- *  PXA935	B1	0x56056938	0x8E653013
- */
-#ifdef CONFIG_PXA25x
-#define __cpu_is_pxa210(id)				\
-	({						\
-		unsigned int _id = (id) & 0xf3f0;	\
-		_id == 0x2120;				\
-	})
-
-#define __cpu_is_pxa250(id)				\
-	({						\
-		unsigned int _id = (id) & 0xf3ff;	\
-		_id <= 0x2105;				\
-	})
-
-#define __cpu_is_pxa255(id)				\
-	({						\
-		unsigned int _id = (id) & 0xffff;	\
-		_id == 0x2d06;				\
-	})
-
-#define __cpu_is_pxa25x(id)				\
-	({						\
-		unsigned int _id = (id) & 0xf300;	\
-		_id == 0x2100;				\
-	})
-#else
-#define __cpu_is_pxa210(id)	(0)
-#define __cpu_is_pxa250(id)	(0)
-#define __cpu_is_pxa255(id)	(0)
-#define __cpu_is_pxa25x(id)	(0)
-#endif
-
-#ifdef CONFIG_PXA27x
-#define __cpu_is_pxa27x(id)				\
-	({						\
-		unsigned int _id = (id) >> 4 & 0xfff;	\
-		_id == 0x411;				\
-	})
-#else
-#define __cpu_is_pxa27x(id)	(0)
-#endif
-
-#ifdef CONFIG_CPU_PXA300
-#define __cpu_is_pxa300(id)				\
-	({						\
-		unsigned int _id = (id) >> 4 & 0xfff;	\
-		_id == 0x688;				\
-	 })
-#else
-#define __cpu_is_pxa300(id)	(0)
-#endif
-
-#ifdef CONFIG_CPU_PXA310
-#define __cpu_is_pxa310(id)				\
-	({						\
-		unsigned int _id = (id) >> 4 & 0xfff;	\
-		_id == 0x689;				\
-	 })
-#else
-#define __cpu_is_pxa310(id)	(0)
-#endif
-
-#ifdef CONFIG_CPU_PXA320
-#define __cpu_is_pxa320(id)				\
-	({						\
-		unsigned int _id = (id) >> 4 & 0xfff;	\
-		_id == 0x603 || _id == 0x682;		\
-	 })
-#else
-#define __cpu_is_pxa320(id)	(0)
-#endif
-
-#ifdef CONFIG_CPU_PXA930
-#define __cpu_is_pxa930(id)				\
-	({						\
-		unsigned int _id = (id) >> 4 & 0xfff;	\
-		_id == 0x683;				\
-	 })
-#else
-#define __cpu_is_pxa930(id)	(0)
-#endif
-
-#ifdef CONFIG_CPU_PXA935
-#define __cpu_is_pxa935(id)				\
-	({						\
-		unsigned int _id = (id) >> 4 & 0xfff;	\
-		_id == 0x693;				\
-	 })
-#else
-#define __cpu_is_pxa935(id)	(0)
-#endif
-
-#ifdef CONFIG_CPU_PXA955
-#define __cpu_is_pxa955(id)				\
-	({						\
-		unsigned int _id = (id) >> 4 & 0xfff;	\
-		_id == 0x581 || _id == 0xc08		\
-			|| _id == 0xb76;		\
-	})
-#else
-#define __cpu_is_pxa955(id)	(0)
-#endif
-
-#define cpu_is_pxa210()					\
-	({						\
-		__cpu_is_pxa210(read_cpuid_id());	\
-	})
-
-#define cpu_is_pxa250()					\
-	({						\
-		__cpu_is_pxa250(read_cpuid_id());	\
-	})
-
-#define cpu_is_pxa255()                                 \
-	({                                              \
-		__cpu_is_pxa255(read_cpuid_id());       \
-	})
-
-#define cpu_is_pxa25x()					\
-	({						\
-		__cpu_is_pxa25x(read_cpuid_id());	\
-	})
-
-#define cpu_is_pxa27x()					\
-	({						\
-		__cpu_is_pxa27x(read_cpuid_id());	\
-	})
-
-#define cpu_is_pxa300()					\
-	({						\
-		__cpu_is_pxa300(read_cpuid_id());	\
-	 })
-
-#define cpu_is_pxa310()					\
-	({						\
-		__cpu_is_pxa310(read_cpuid_id());	\
-	 })
-
-#define cpu_is_pxa320()					\
-	({						\
-		__cpu_is_pxa320(read_cpuid_id());	\
-	 })
-
-#define cpu_is_pxa930()					\
-	({						\
-		__cpu_is_pxa930(read_cpuid_id());	\
-	 })
-
-#define cpu_is_pxa935()					\
-	({						\
-		__cpu_is_pxa935(read_cpuid_id());	\
-	 })
-
-#define cpu_is_pxa955()					\
-	({						\
-		__cpu_is_pxa955(read_cpuid_id());	\
-	})
-
-
-/*
- * CPUID Core Generation Bit
- * <= 0x2 for pxa21x/pxa25x/pxa26x/pxa27x
- */
-#if defined(CONFIG_PXA25x) || defined(CONFIG_PXA27x)
-#define __cpu_is_pxa2xx(id)				\
-	({						\
-		unsigned int _id = (id) >> 13 & 0x7;	\
-		_id <= 0x2;				\
-	 })
-#else
-#define __cpu_is_pxa2xx(id)	(0)
-#endif
-
-#ifdef CONFIG_PXA3xx
-#define __cpu_is_pxa3xx(id)				\
-	({						\
-		__cpu_is_pxa300(id)			\
-			|| __cpu_is_pxa310(id)		\
-			|| __cpu_is_pxa320(id)		\
-			|| __cpu_is_pxa93x(id);		\
-	 })
-#else
-#define __cpu_is_pxa3xx(id)	(0)
-#endif
-
-#if defined(CONFIG_CPU_PXA930) || defined(CONFIG_CPU_PXA935)
-#define __cpu_is_pxa93x(id)				\
-	({						\
-		__cpu_is_pxa930(id)			\
-			|| __cpu_is_pxa935(id);		\
-	 })
-#else
-#define __cpu_is_pxa93x(id)	(0)
-#endif
-
-#ifdef CONFIG_PXA95x
-#define __cpu_is_pxa95x(id)				\
-	({						\
-		__cpu_is_pxa955(id);			\
-	})
-#else
-#define __cpu_is_pxa95x(id)	(0)
-#endif
-
-#define cpu_is_pxa2xx()					\
-	({						\
-		__cpu_is_pxa2xx(read_cpuid_id());	\
-	 })
-
-#define cpu_is_pxa3xx()					\
-	({						\
-		__cpu_is_pxa3xx(read_cpuid_id());	\
-	 })
-
-#define cpu_is_pxa93x()					\
-	({						\
-		__cpu_is_pxa93x(read_cpuid_id());	\
-	 })
-
-#define cpu_is_pxa95x()					\
-	({						\
-		__cpu_is_pxa95x(read_cpuid_id());	\
-	})
-
-/*
- * return current memory and LCD clock frequency in units of 10kHz
- */
-extern unsigned int get_memclk_frequency_10khz(void);
-
-/* return the clock tick rate of the OS timer */
-extern unsigned long get_clock_tick_rate(void);
-#endif
-
-#endif  /* _ASM_ARCH_HARDWARE_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/hx4700.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/hx4700.h
deleted file mode 100644
index 8bc02913..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/hx4700.h
+++ /dev/null
@@ -1,132 +0,0 @@
-/*
- * GPIO and IRQ definitions for HP iPAQ hx4700
- *
- * Copyright (c) 2008 Philipp Zabel
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef _HX4700_H_
-#define _HX4700_H_
-
-#include <linux/gpio.h>
-#include <linux/mfd/asic3.h>
-
-#define HX4700_ASIC3_GPIO_BASE	PXA_NR_BUILTIN_GPIO
-#define HX4700_EGPIO_BASE	(HX4700_ASIC3_GPIO_BASE + ASIC3_NUM_GPIOS)
-#define HX4700_NR_IRQS		(IRQ_BOARD_START + 70)
-
-/*
- * PXA GPIOs
- */
-
-#define GPIO0_HX4700_nKEY_POWER			0
-#define GPIO12_HX4700_ASIC3_IRQ			12
-#define GPIO13_HX4700_W3220_IRQ			13
-#define GPIO14_HX4700_nWLAN_IRQ			14
-#define GPIO18_HX4700_RDY			18
-#define GPIO22_HX4700_LCD_RL			22
-#define GPIO27_HX4700_CODEC_ON			27
-#define GPIO32_HX4700_RS232_ON			32
-#define GPIO52_HX4700_CPU_nBATT_FAULT		52
-#define GPIO58_HX4700_TSC2046_nPENIRQ		58
-#define GPIO59_HX4700_LCD_PC1			59
-#define GPIO60_HX4700_CF_RNB			60
-#define GPIO61_HX4700_W3220_nRESET		61
-#define GPIO62_HX4700_LCD_nRESET		62
-#define GPIO63_HX4700_CPU_SS_nRESET		63
-#define GPIO65_HX4700_TSC2046_PEN_PU		65
-#define GPIO66_HX4700_ASIC3_nSDIO_IRQ		66
-#define GPIO67_HX4700_EUART_PS			67
-#define GPIO70_HX4700_LCD_SLIN1			70
-#define GPIO71_HX4700_ASIC3_nRESET		71
-#define GPIO72_HX4700_BQ24022_nCHARGE_EN	72
-#define GPIO73_HX4700_LCD_UD_1			73
-#define GPIO75_HX4700_EARPHONE_nDET		75
-#define GPIO76_HX4700_USBC_PUEN			76
-#define GPIO81_HX4700_CPU_GP_nRESET		81
-#define GPIO82_HX4700_EUART_RESET		82
-#define GPIO83_HX4700_WLAN_nRESET		83
-#define GPIO84_HX4700_LCD_SQN			84
-#define GPIO85_HX4700_nPCE1			85
-#define GPIO88_HX4700_TSC2046_CS		88
-#define GPIO91_HX4700_FLASH_VPEN		91
-#define GPIO92_HX4700_HP_DRIVER			92
-#define GPIO93_HX4700_EUART_INT			93
-#define GPIO94_HX4700_KEY_MAIL			94
-#define GPIO95_HX4700_BATT_OFF			95
-#define GPIO96_HX4700_BQ24022_ISET2		96
-#define GPIO97_HX4700_nBL_DETECT		97
-#define GPIO99_HX4700_KEY_CONTACTS		99
-#define GPIO100_HX4700_AUTO_SENSE		100 /* BL auto brightness */
-#define GPIO102_HX4700_SYNAPTICS_POWER_ON	102
-#define GPIO103_HX4700_SYNAPTICS_INT		103
-#define GPIO105_HX4700_nIR_ON			105
-#define GPIO106_HX4700_CPU_BT_nRESET		106
-#define GPIO107_HX4700_SPK_nSD			107
-#define GPIO109_HX4700_CODEC_nPDN		109
-#define GPIO110_HX4700_LCD_LVDD_3V3_ON		110
-#define GPIO111_HX4700_LCD_AVDD_3V3_ON		111
-#define GPIO112_HX4700_LCD_N2V7_7V3_ON		112
-#define GPIO114_HX4700_CF_RESET			114
-#define GPIO116_HX4700_CPU_HW_nRESET		116
-
-/*
- * ASIC3 GPIOs
- */
-
-#define GPIOC_BASE		(HX4700_ASIC3_GPIO_BASE + 32)
-#define GPIOD_BASE		(HX4700_ASIC3_GPIO_BASE + 48)
-
-#define GPIOC0_LED_RED		(GPIOC_BASE + 0)
-#define GPIOC1_LED_GREEN	(GPIOC_BASE + 1)
-#define GPIOC2_LED_BLUE		(GPIOC_BASE + 2)
-#define GPIOC3_nSD_CS		(GPIOC_BASE + 3)
-#define GPIOC4_CF_nCD		(GPIOC_BASE + 4)	/* Input */
-#define GPIOC5_nCIOW		(GPIOC_BASE + 5)	/* Output, to CF */
-#define GPIOC6_nCIOR		(GPIOC_BASE + 6)	/* Output, to CF */
-#define GPIOC7_nPCE1		(GPIOC_BASE + 7)	/* Input, from CPU */
-#define GPIOC8_nPCE2		(GPIOC_BASE + 8)	/* Input, from CPU */
-#define GPIOC9_nPOE		(GPIOC_BASE + 9)	/* Input, from CPU */
-#define GPIOC10_CF_nPWE		(GPIOC_BASE + 10)	/* Input */
-#define GPIOC11_PSKTSEL		(GPIOC_BASE + 11)	/* Input, from CPU */
-#define GPIOC12_nPREG		(GPIOC_BASE + 12)	/* Input, from CPU */
-#define GPIOC13_nPWAIT		(GPIOC_BASE + 13)	/* Output, to CPU */
-#define GPIOC14_nPIOIS16	(GPIOC_BASE + 14)	/* Output, to CPU */
-#define GPIOC15_nPIOR		(GPIOC_BASE + 15)	/* Input, from CPU */
-
-#define GPIOD0_CPU_SS_INT	(GPIOD_BASE + 0)	/* Input */
-#define GPIOD1_nKEY_CALENDAR	(GPIOD_BASE + 1)
-#define GPIOD2_BLUETOOTH_WAKEUP	(GPIOD_BASE + 2)
-#define GPIOD3_nKEY_HOME	(GPIOD_BASE + 3)
-#define GPIOD4_CF_nCD		(GPIOD_BASE + 4)	/* Input, from CF */
-#define GPIOD5_nPIO		(GPIOD_BASE + 5)	/* Input */
-#define GPIOD6_nKEY_RECORD	(GPIOD_BASE + 6)
-#define GPIOD7_nSDIO_DETECT	(GPIOD_BASE + 7)
-#define GPIOD8_COM_DCD		(GPIOD_BASE + 8)	/* Input */
-#define GPIOD9_nAC_IN		(GPIOD_BASE + 9)
-#define GPIOD10_nSDIO_IRQ	(GPIOD_BASE + 10)	/* Input */
-#define GPIOD11_nCIOIS16	(GPIOD_BASE + 11)	/* Input, from CF */
-#define GPIOD12_nCWAIT		(GPIOD_BASE + 12)	/* Input, from CF */
-#define GPIOD13_CF_RNB		(GPIOD_BASE + 13)	/* Input */
-#define GPIOD14_nUSBC_DETECT	(GPIOD_BASE + 14)
-#define GPIOD15_nPIOW		(GPIOD_BASE + 15)	/* Input, from CPU */
-
-/*
- * EGPIOs
- */
-
-#define EGPIO0_VCC_3V3_EN	(HX4700_EGPIO_BASE + 0)	/* WLAN support chip */
-#define EGPIO1_WL_VREG_EN	(HX4700_EGPIO_BASE + 1)	/* WLAN power */
-#define EGPIO2_VCC_2V1_WL_EN	(HX4700_EGPIO_BASE + 2)	/* unused */
-#define EGPIO3_SS_PWR_ON	(HX4700_EGPIO_BASE + 3)	/* smart slot power */
-#define EGPIO4_CF_3V3_ON	(HX4700_EGPIO_BASE + 4)	/* CF 3.3V enable */
-#define EGPIO5_BT_3V3_ON	(HX4700_EGPIO_BASE + 5)	/* BT 3.3V enable */
-#define EGPIO6_WL1V8_EN		(HX4700_EGPIO_BASE + 6)	/* WLAN 1.8V enable */
-#define EGPIO7_VCC_3V3_WL_EN	(HX4700_EGPIO_BASE + 7)	/* WLAN 3.3V enable */
-#define EGPIO8_USB_3V3_ON	(HX4700_EGPIO_BASE + 8)	/* unused */
-
-#endif /* _HX4700_H_ */
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/idp.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/idp.h
deleted file mode 100644
index 22a96f87..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/idp.h
+++ /dev/null
@@ -1,197 +0,0 @@
-/*
- *  arch/arm/mach-pxa/include/mach/idp.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Copyright (c) 2001 Cliff Brake, Accelent Systems Inc.
- *
- * 2001-09-13: Cliff Brake <cbrake@accelent.com>
- *             Initial code
- *
- * 2005-02-15: Cliff Brake <cliff.brake@gmail.com>
- *             <http://www.vibren.com> <http://bec-systems.com>
- *             Changes for 2.6 kernel.
- */
-
-
-/*
- * Note: this file must be safe to include in assembly files
- *
- * Support for the Vibren PXA255 IDP requires rev04 or later
- * IDP hardware.
- */
-
-
-#define IDP_FLASH_PHYS		(PXA_CS0_PHYS)
-#define IDP_ALT_FLASH_PHYS	(PXA_CS1_PHYS)
-#define IDP_MEDIAQ_PHYS		(PXA_CS3_PHYS)
-#define IDP_IDE_PHYS		(PXA_CS5_PHYS + 0x03000000)
-#define IDP_ETH_PHYS		(PXA_CS5_PHYS + 0x03400000)
-#define IDP_COREVOLT_PHYS	(PXA_CS5_PHYS + 0x03800000)
-#define IDP_CPLD_PHYS		(PXA_CS5_PHYS + 0x03C00000)
-
-
-/*
- * virtual memory map
- */
-
-#define IDP_COREVOLT_VIRT	(0xf0000000)
-#define IDP_COREVOLT_SIZE	(1*1024*1024)
-
-#define IDP_CPLD_VIRT		(IDP_COREVOLT_VIRT + IDP_COREVOLT_SIZE)
-#define IDP_CPLD_SIZE		(1*1024*1024)
-
-#if (IDP_CPLD_VIRT + IDP_CPLD_SIZE) > 0xfc000000
-#error Your custom IO space is getting a bit large !!
-#endif
-
-#define CPLD_P2V(x)		((x) - IDP_CPLD_PHYS + IDP_CPLD_VIRT)
-#define CPLD_V2P(x)		((x) - IDP_CPLD_VIRT + IDP_CPLD_PHYS)
-
-#ifndef __ASSEMBLY__
-#  define __CPLD_REG(x)		(*((volatile unsigned long *)CPLD_P2V(x)))
-#else
-#  define __CPLD_REG(x)		CPLD_P2V(x)
-#endif
-
-/* board level registers in the CPLD: (offsets from CPLD_VIRT) */
-
-#define _IDP_CPLD_REV			(IDP_CPLD_PHYS + 0x00)
-#define _IDP_CPLD_PERIPH_PWR		(IDP_CPLD_PHYS + 0x04)
-#define _IDP_CPLD_LED_CONTROL		(IDP_CPLD_PHYS + 0x08)
-#define _IDP_CPLD_KB_COL_HIGH		(IDP_CPLD_PHYS + 0x0C)
-#define _IDP_CPLD_KB_COL_LOW		(IDP_CPLD_PHYS + 0x10)
-#define _IDP_CPLD_PCCARD_EN		(IDP_CPLD_PHYS + 0x14)
-#define _IDP_CPLD_GPIOH_DIR		(IDP_CPLD_PHYS + 0x18)
-#define _IDP_CPLD_GPIOH_VALUE		(IDP_CPLD_PHYS + 0x1C)
-#define _IDP_CPLD_GPIOL_DIR		(IDP_CPLD_PHYS + 0x20)
-#define _IDP_CPLD_GPIOL_VALUE		(IDP_CPLD_PHYS + 0x24)
-#define _IDP_CPLD_PCCARD_PWR		(IDP_CPLD_PHYS + 0x28)
-#define _IDP_CPLD_MISC_CTRL		(IDP_CPLD_PHYS + 0x2C)
-#define _IDP_CPLD_LCD			(IDP_CPLD_PHYS + 0x30)
-#define _IDP_CPLD_FLASH_WE		(IDP_CPLD_PHYS + 0x34)
-
-#define _IDP_CPLD_KB_ROW		(IDP_CPLD_PHYS + 0x50)
-#define _IDP_CPLD_PCCARD0_STATUS	(IDP_CPLD_PHYS + 0x54)
-#define _IDP_CPLD_PCCARD1_STATUS	(IDP_CPLD_PHYS + 0x58)
-#define _IDP_CPLD_MISC_STATUS		(IDP_CPLD_PHYS + 0x5C)
-
-/* FPGA register virtual addresses */
-
-#define IDP_CPLD_REV			__CPLD_REG(_IDP_CPLD_REV)
-#define IDP_CPLD_PERIPH_PWR		__CPLD_REG(_IDP_CPLD_PERIPH_PWR)
-#define IDP_CPLD_LED_CONTROL		__CPLD_REG(_IDP_CPLD_LED_CONTROL)
-#define IDP_CPLD_KB_COL_HIGH		__CPLD_REG(_IDP_CPLD_KB_COL_HIGH)
-#define IDP_CPLD_KB_COL_LOW		__CPLD_REG(_IDP_CPLD_KB_COL_LOW)
-#define IDP_CPLD_PCCARD_EN		__CPLD_REG(_IDP_CPLD_PCCARD_EN)
-#define IDP_CPLD_GPIOH_DIR		__CPLD_REG(_IDP_CPLD_GPIOH_DIR)
-#define IDP_CPLD_GPIOH_VALUE		__CPLD_REG(_IDP_CPLD_GPIOH_VALUE)
-#define IDP_CPLD_GPIOL_DIR		__CPLD_REG(_IDP_CPLD_GPIOL_DIR)
-#define IDP_CPLD_GPIOL_VALUE		__CPLD_REG(_IDP_CPLD_GPIOL_VALUE)
-#define IDP_CPLD_PCCARD_PWR		__CPLD_REG(_IDP_CPLD_PCCARD_PWR)
-#define IDP_CPLD_MISC_CTRL		__CPLD_REG(_IDP_CPLD_MISC_CTRL)
-#define IDP_CPLD_LCD			__CPLD_REG(_IDP_CPLD_LCD)
-#define IDP_CPLD_FLASH_WE		__CPLD_REG(_IDP_CPLD_FLASH_WE)
-
-#define IDP_CPLD_KB_ROW		        __CPLD_REG(_IDP_CPLD_KB_ROW)
-#define IDP_CPLD_PCCARD0_STATUS	        __CPLD_REG(_IDP_CPLD_PCCARD0_STATUS)
-#define IDP_CPLD_PCCARD1_STATUS	        __CPLD_REG(_IDP_CPLD_PCCARD1_STATUS)
-#define IDP_CPLD_MISC_STATUS		__CPLD_REG(_IDP_CPLD_MISC_STATUS)
-
-
-/*
- * Bit masks for various registers
- */
-
-// IDP_CPLD_PCCARD_PWR
-#define PCC0_PWR0	(1 << 0)
-#define PCC0_PWR1	(1 << 1)
-#define PCC0_PWR2	(1 << 2)
-#define PCC0_PWR3	(1 << 3)
-#define PCC1_PWR0	(1 << 4)
-#define PCC1_PWR1	(1 << 5)
-#define PCC1_PWR2	(1 << 6)
-#define PCC1_PWR3	(1 << 7)
-
-// IDP_CPLD_PCCARD_EN
-#define PCC0_RESET	(1 << 6)
-#define PCC1_RESET	(1 << 7)
-#define PCC0_ENABLE	(1 << 0)
-#define PCC1_ENABLE	(1 << 1)
-
-// IDP_CPLD_PCCARDx_STATUS
-#define _PCC_WRPROT	(1 << 7) // 7-4 read as low true
-#define _PCC_RESET	(1 << 6)
-#define _PCC_IRQ	(1 << 5)
-#define _PCC_INPACK	(1 << 4)
-#define PCC_BVD2	(1 << 3)
-#define PCC_BVD1	(1 << 2)
-#define PCC_VS2		(1 << 1)
-#define PCC_VS1		(1 << 0)
-
-/* A listing of interrupts used by external hardware devices */
-
-#define TOUCH_PANEL_IRQ			PXA_GPIO_TO_IRQ(5)
-#define IDE_IRQ				PXA_GPIO_TO_IRQ(21)
-
-#define TOUCH_PANEL_IRQ_EDGE		IRQ_TYPE_EDGE_FALLING
-
-#define ETHERNET_IRQ			PXA_GPIO_TO_IRQ(4)
-#define ETHERNET_IRQ_EDGE		IRQ_TYPE_EDGE_RISING
-
-#define IDE_IRQ_EDGE			IRQ_TYPE_EDGE_RISING
-
-#define PCMCIA_S0_CD_VALID		PXA_GPIO_TO_IRQ(7)
-#define PCMCIA_S0_CD_VALID_EDGE		IRQ_TYPE_EDGE_BOTH
-
-#define PCMCIA_S1_CD_VALID		PXA_GPIO_TO_IRQ(8)
-#define PCMCIA_S1_CD_VALID_EDGE		IRQ_TYPE_EDGE_BOTH
-
-#define PCMCIA_S0_RDYINT		PXA_GPIO_TO_IRQ(19)
-#define PCMCIA_S1_RDYINT		PXA_GPIO_TO_IRQ(22)
-
-
-/*
- * Macros for LED Driver
- */
-
-/* leds 0 = ON */
-#define IDP_HB_LED	(1<<5)
-#define IDP_BUSY_LED	(1<<6)
-
-#define IDP_LEDS_MASK	(IDP_HB_LED | IDP_BUSY_LED)
-
-/*
- * macros for MTD driver
- */
-
-#define FLASH_WRITE_PROTECT_DISABLE()	((IDP_CPLD_FLASH_WE) &= ~(0x1))
-#define FLASH_WRITE_PROTECT_ENABLE()	((IDP_CPLD_FLASH_WE) |= (0x1))
-
-/*
- * macros for matrix keyboard driver
- */
-
-#define KEYBD_MATRIX_NUMBER_INPUTS	7
-#define KEYBD_MATRIX_NUMBER_OUTPUTS	14
-
-#define KEYBD_MATRIX_INVERT_OUTPUT_LOGIC	FALSE
-#define KEYBD_MATRIX_INVERT_INPUT_LOGIC		FALSE
-
-#define KEYBD_MATRIX_SETTLING_TIME_US			100
-#define KEYBD_MATRIX_KEYSTATE_DEBOUNCE_CONSTANT		2
-
-#define KEYBD_MATRIX_SET_OUTPUTS(outputs) \
-{\
-	IDP_CPLD_KB_COL_LOW = outputs;\
-	IDP_CPLD_KB_COL_HIGH = outputs >> 7;\
-}
-
-#define KEYBD_MATRIX_GET_INPUTS(inputs) \
-{\
-	inputs = (IDP_CPLD_KB_ROW & 0x7f);\
-}
-
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/io.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/io.h
deleted file mode 100644
index cd78b7fe..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/io.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * arch/arm/mach-pxa/include/mach/io.h
- *
- * Copied from asm/arch/sa1100/io.h
- */
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-/*
- * We don't actually have real ISA nor PCI buses, but there is so many
- * drivers out there that might just work if we fake them...
- */
-#define __io(a)		__typesafe_io(a)
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/irda.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/irda.h
deleted file mode 100644
index 3cd41f77..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/irda.h
+++ /dev/null
@@ -1,25 +0,0 @@
-#ifndef ASMARM_ARCH_IRDA_H
-#define ASMARM_ARCH_IRDA_H
-
-/* board specific transceiver capabilities */
-
-#define IR_OFF		1
-#define IR_SIRMODE	2
-#define IR_FIRMODE	4
-
-struct pxaficp_platform_data {
-	int transceiver_cap;
-	void (*transceiver_mode)(struct device *dev, int mode);
-	int (*startup)(struct device *dev);
-	void (*shutdown)(struct device *dev);
-	int gpio_pwdown;		/* powerdown GPIO for the IrDA chip */
-	bool gpio_pwdown_inverted;	/* gpio_pwdown is inverted */
-};
-
-extern void pxa_set_ficp_info(struct pxaficp_platform_data *info);
-
-#if defined(CONFIG_PXA25x) || defined(CONFIG_PXA27x)
-void pxa2xx_transceiver_mode(struct device *dev, int mode);
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/irqs.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/irqs.h
deleted file mode 100644
index 8765782d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/irqs.h
+++ /dev/null
@@ -1,117 +0,0 @@
-/*
- *  arch/arm/mach-pxa/include/mach/irqs.h
- *
- *  Author:	Nicolas Pitre
- *  Created:	Jun 15, 2001
- *  Copyright:	MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_MACH_IRQS_H
-#define __ASM_MACH_IRQS_H
-
-#ifdef CONFIG_PXA_HAVE_ISA_IRQS
-#define PXA_ISA_IRQ(x)	(x)
-#define PXA_ISA_IRQ_NUM	(16)
-#else
-#define PXA_ISA_IRQ_NUM	(0)
-#endif
-
-#define PXA_IRQ(x)	(PXA_ISA_IRQ_NUM + (x))
-
-#define IRQ_SSP3	PXA_IRQ(0)	/* SSP3 service request */
-#define IRQ_MSL		PXA_IRQ(1)	/* MSL Interface interrupt */
-#define IRQ_USBH2	PXA_IRQ(2)	/* USB Host interrupt 1 (OHCI,PXA27x) */
-#define IRQ_USBH1	PXA_IRQ(3)	/* USB Host interrupt 2 (non-OHCI,PXA27x) */
-#define IRQ_KEYPAD	PXA_IRQ(4)	/* Key pad controller */
-#define IRQ_MEMSTK	PXA_IRQ(5)	/* Memory Stick interrupt (PXA27x) */
-#define IRQ_ACIPC0	PXA_IRQ(5)	/* AP-CP Communication (PXA930) */
-#define IRQ_PWRI2C	PXA_IRQ(6)	/* Power I2C interrupt */
-#define IRQ_HWUART	PXA_IRQ(7)	/* HWUART Transmit/Receive/Error (PXA26x) */
-#define IRQ_OST_4_11	PXA_IRQ(7)	/* OS timer 4-11 matches (PXA27x) */
-#define	IRQ_GPIO0	PXA_IRQ(8)	/* GPIO0 Edge Detect */
-#define	IRQ_GPIO1	PXA_IRQ(9)	/* GPIO1 Edge Detect */
-#define	IRQ_GPIO_2_x	PXA_IRQ(10)	/* GPIO[2-x] Edge Detect */
-#define	IRQ_USB		PXA_IRQ(11)	/* USB Service */
-#define	IRQ_PMU		PXA_IRQ(12)	/* Performance Monitoring Unit */
-#define	IRQ_I2S		PXA_IRQ(13)	/* I2S Interrupt (PXA27x) */
-#define IRQ_SSP4	PXA_IRQ(13)	/* SSP4 service request (PXA3xx) */
-#define	IRQ_AC97	PXA_IRQ(14)	/* AC97 Interrupt */
-#define IRQ_ASSP	PXA_IRQ(15)	/* Audio SSP Service Request (PXA25x) */
-#define IRQ_USIM	PXA_IRQ(15)     /* Smart Card interface interrupt (PXA27x) */
-#define IRQ_NSSP	PXA_IRQ(16)	/* Network SSP Service Request (PXA25x) */
-#define IRQ_SSP2	PXA_IRQ(16)	/* SSP2 interrupt (PXA27x) */
-#define	IRQ_LCD		PXA_IRQ(17)	/* LCD Controller Service Request */
-#define	IRQ_I2C		PXA_IRQ(18)	/* I2C Service Request */
-#define	IRQ_ICP		PXA_IRQ(19)	/* ICP Transmit/Receive/Error */
-#define IRQ_ACIPC2	PXA_IRQ(19)	/* AP-CP Communication (PXA930) */
-#define	IRQ_STUART	PXA_IRQ(20)	/* STUART Transmit/Receive/Error */
-#define	IRQ_BTUART	PXA_IRQ(21)	/* BTUART Transmit/Receive/Error */
-#define	IRQ_FFUART	PXA_IRQ(22)	/* FFUART Transmit/Receive/Error*/
-#define	IRQ_MMC		PXA_IRQ(23)	/* MMC Status/Error Detection */
-#define	IRQ_SSP		PXA_IRQ(24)	/* SSP Service Request */
-#define	IRQ_DMA 	PXA_IRQ(25)	/* DMA Channel Service Request */
-#define	IRQ_OST0 	PXA_IRQ(26)	/* OS Timer match 0 */
-#define	IRQ_OST1 	PXA_IRQ(27)	/* OS Timer match 1 */
-#define	IRQ_OST2 	PXA_IRQ(28)	/* OS Timer match 2 */
-#define	IRQ_OST3 	PXA_IRQ(29)	/* OS Timer match 3 */
-#define	IRQ_RTC1Hz	PXA_IRQ(30)	/* RTC HZ Clock Tick */
-#define	IRQ_RTCAlrm	PXA_IRQ(31)	/* RTC Alarm */
-
-#define IRQ_TPM		PXA_IRQ(32)	/* TPM interrupt */
-#define IRQ_CAMERA	PXA_IRQ(33)	/* Camera Interface */
-#define IRQ_CIR		PXA_IRQ(34)	/* Consumer IR */
-#define IRQ_COMM_WDT	PXA_IRQ(35) 	/* Comm WDT interrupt */
-#define IRQ_TSI		PXA_IRQ(36)	/* Touch Screen Interface (PXA320) */
-#define IRQ_ENHROT	PXA_IRQ(37)	/* Enhanced Rotary (PXA930) */
-#define IRQ_USIM2	PXA_IRQ(38)	/* USIM2 Controller */
-#define IRQ_GCU		PXA_IRQ(39)	/* Graphics Controller (PXA3xx) */
-#define IRQ_ACIPC1	PXA_IRQ(40)	/* AP-CP Communication (PXA930) */
-#define IRQ_MMC2	PXA_IRQ(41)	/* MMC2 Controller */
-#define IRQ_TRKBALL	PXA_IRQ(43)	/* Track Ball (PXA930) */
-#define IRQ_1WIRE	PXA_IRQ(44)	/* 1-Wire Controller */
-#define IRQ_NAND	PXA_IRQ(45)	/* NAND Controller */
-#define IRQ_USB2	PXA_IRQ(46)	/* USB 2.0 Device Controller */
-#define IRQ_WAKEUP0	PXA_IRQ(49)	/* EXT_WAKEUP0 */
-#define IRQ_WAKEUP1	PXA_IRQ(50)	/* EXT_WAKEUP1 */
-#define IRQ_DMEMC	PXA_IRQ(51)	/* Dynamic Memory Controller */
-#define IRQ_MMC3	PXA_IRQ(55)	/* MMC3 Controller (PXA310) */
-
-#define IRQ_U2O		PXA_IRQ(64)	/* USB OTG 2.0 Controller (PXA935) */
-#define IRQ_U2H		PXA_IRQ(65)	/* USB Host 2.0 Controller (PXA935) */
-#define IRQ_PXA935_MMC0	PXA_IRQ(72)	/* MMC0 Controller (PXA935) */
-#define IRQ_PXA935_MMC1	PXA_IRQ(73)	/* MMC1 Controller (PXA935) */
-#define IRQ_PXA935_MMC2	PXA_IRQ(74)	/* MMC2 Controller (PXA935) */
-#define IRQ_PXA955_MMC3	PXA_IRQ(75)	/* MMC3 Controller (PXA955) */
-#define IRQ_U2P		PXA_IRQ(93)	/* USB PHY D+/D- Lines (PXA935) */
-
-#define PXA_GPIO_IRQ_BASE	PXA_IRQ(96)
-#define PXA_NR_BUILTIN_GPIO	(192)
-#define PXA_GPIO_TO_IRQ(x)	(PXA_GPIO_IRQ_BASE + (x))
-
-/*
- * The following interrupts are for board specific purposes. Since
- * the kernel can only run on one machine at a time, we can re-use
- * these.
- * By default, no board IRQ is reserved. It should be finished in
- * custom board since sparse IRQ is already enabled.
- */
-#define IRQ_BOARD_START		(PXA_GPIO_IRQ_BASE + PXA_NR_BUILTIN_GPIO)
-
-#define PXA_NR_IRQS		(IRQ_BOARD_START)
-
-#ifndef __ASSEMBLY__
-struct irq_data;
-struct pt_regs;
-
-void pxa_mask_irq(struct irq_data *);
-void pxa_unmask_irq(struct irq_data *);
-void icip_handle_irq(struct pt_regs *);
-void ichp_handle_irq(struct pt_regs *);
-
-void pxa_init_irq(int irq_nr, int (*set_wake)(struct irq_data *, unsigned int));
-#endif
-
-#endif /* __ASM_MACH_IRQS_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/littleton.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/littleton.h
deleted file mode 100644
index 8066be54..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/littleton.h
+++ /dev/null
@@ -1,13 +0,0 @@
-#ifndef __ASM_ARCH_LITTLETON_H
-#define __ASM_ARCH_LITTLETON_H
-
-#define LITTLETON_ETH_PHYS	0x30000000
-
-#define LITTLETON_GPIO_LCD_CS	(17)
-
-#define EXT0_GPIO_BASE	(PXA_NR_BUILTIN_GPIO)
-#define EXT0_GPIO(x)	(EXT0_GPIO_BASE + (x))
-
-#define LITTLETON_NR_IRQS	(IRQ_BOARD_START + 8)
-
-#endif /* __ASM_ARCH_LITTLETON_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/lpd270.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/lpd270.h
deleted file mode 100644
index 4edc712a..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/lpd270.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * arch/arm/mach-pxa/include/mach/lpd270.h
- *
- * Author:	Lennert Buytenhek
- * Created:	Feb 10, 2006
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_LPD270_H
-#define __ASM_ARCH_LPD270_H
-
-#define LPD270_CPLD_PHYS	PXA_CS2_PHYS
-#define LPD270_CPLD_VIRT	IOMEM(0xf0000000)
-#define LPD270_CPLD_SIZE	0x00100000
-
-#define LPD270_ETH_PHYS		(PXA_CS2_PHYS + 0x01000000)
-
-/* CPLD registers  */
-#define LPD270_CPLD_REG(x)	(LPD270_CPLD_VIRT + (x))
-#define LPD270_CONTROL		LPD270_CPLD_REG(0x00)
-#define LPD270_PERIPHERAL0	LPD270_CPLD_REG(0x04)
-#define LPD270_PERIPHERAL1	LPD270_CPLD_REG(0x08)
-#define LPD270_CPLD_REVISION	LPD270_CPLD_REG(0x14)
-#define LPD270_EEPROM_SPI_ITF	LPD270_CPLD_REG(0x20)
-#define LPD270_MODE_PINS	LPD270_CPLD_REG(0x24)
-#define LPD270_EGPIO		LPD270_CPLD_REG(0x30)
-#define LPD270_INT_MASK		LPD270_CPLD_REG(0x40)
-#define LPD270_INT_STATUS	LPD270_CPLD_REG(0x50)
-
-#define LPD270_INT_AC97		(1 << 4)  /* AC'97 CODEC IRQ */
-#define LPD270_INT_ETHERNET	(1 << 3)  /* Ethernet controller IRQ */
-#define LPD270_INT_USBC		(1 << 2)  /* USB client cable detection IRQ */
-
-#define LPD270_IRQ(x)		(IRQ_BOARD_START + (x))
-#define LPD270_USBC_IRQ		LPD270_IRQ(2)
-#define LPD270_ETHERNET_IRQ	LPD270_IRQ(3)
-#define LPD270_AC97_IRQ		LPD270_IRQ(4)
-#define LPD270_NR_IRQS		(IRQ_BOARD_START + 5)
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/lubbock.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/lubbock.h
deleted file mode 100644
index 2a086e83..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/lubbock.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- *  arch/arm/mach-pxa/include/mach/lubbock.h
- *
- *  Author:	Nicolas Pitre
- *  Created:	Jun 15, 2001
- *  Copyright:	MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#define LUBBOCK_ETH_PHYS	PXA_CS3_PHYS
-
-#define LUBBOCK_FPGA_PHYS	PXA_CS2_PHYS
-#define LUBBOCK_FPGA_VIRT	(0xf0000000)
-#define LUB_P2V(x)		((x) - LUBBOCK_FPGA_PHYS + LUBBOCK_FPGA_VIRT)
-#define LUB_V2P(x)		((x) - LUBBOCK_FPGA_VIRT + LUBBOCK_FPGA_PHYS)
-
-#ifndef __ASSEMBLY__
-#  define __LUB_REG(x)		(*((volatile unsigned long *)LUB_P2V(x)))
-#else
-#  define __LUB_REG(x)		LUB_P2V(x)
-#endif
-
-/* FPGA register virtual addresses */
-#define LUB_WHOAMI		__LUB_REG(LUBBOCK_FPGA_PHYS + 0x000)
-#define LUB_DISC_BLNK_LED	__LUB_REG(LUBBOCK_FPGA_PHYS + 0x040)
-#define LUB_CONF_SWITCHES	__LUB_REG(LUBBOCK_FPGA_PHYS + 0x050)
-#define LUB_USER_SWITCHES	__LUB_REG(LUBBOCK_FPGA_PHYS + 0x060)
-#define LUB_MISC_WR		__LUB_REG(LUBBOCK_FPGA_PHYS + 0x080)
-#define LUB_MISC_RD		__LUB_REG(LUBBOCK_FPGA_PHYS + 0x090)
-#define LUB_IRQ_MASK_EN		__LUB_REG(LUBBOCK_FPGA_PHYS + 0x0c0)
-#define LUB_IRQ_SET_CLR		__LUB_REG(LUBBOCK_FPGA_PHYS + 0x0d0)
-#define LUB_GP			__LUB_REG(LUBBOCK_FPGA_PHYS + 0x100)
-
-/* Board specific IRQs */
-#define LUBBOCK_IRQ(x)		(IRQ_BOARD_START + (x))
-#define LUBBOCK_SD_IRQ		LUBBOCK_IRQ(0)
-#define LUBBOCK_SA1111_IRQ	LUBBOCK_IRQ(1)
-#define LUBBOCK_USB_IRQ		LUBBOCK_IRQ(2)  /* usb connect */
-#define LUBBOCK_ETH_IRQ		LUBBOCK_IRQ(3)
-#define LUBBOCK_UCB1400_IRQ	LUBBOCK_IRQ(4)
-#define LUBBOCK_BB_IRQ		LUBBOCK_IRQ(5)
-#define LUBBOCK_USB_DISC_IRQ	LUBBOCK_IRQ(6)  /* usb disconnect */
-#define LUBBOCK_LAST_IRQ	LUBBOCK_IRQ(6)
-
-#define LUBBOCK_SA1111_IRQ_BASE	(IRQ_BOARD_START + 16)
-#define LUBBOCK_NR_IRQS		(IRQ_BOARD_START + 16 + 55)
-
-#ifndef __ASSEMBLY__
-extern void lubbock_set_misc_wr(unsigned int mask, unsigned int set);
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/magician.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/magician.h
deleted file mode 100644
index ba6a6e1d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/magician.h
+++ /dev/null
@@ -1,120 +0,0 @@
-/*
- * GPIO and IRQ definitions for HTC Magician PDA phones
- *
- * Copyright (c) 2007 Philipp Zabel
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef _MAGICIAN_H_
-#define _MAGICIAN_H_
-
-#include <linux/gpio.h>
-#include <mach/irqs.h>
-
-/*
- * PXA GPIOs
- */
-
-#define GPIO0_MAGICIAN_KEY_POWER		0
-#define GPIO9_MAGICIAN_UNKNOWN			9
-#define GPIO10_MAGICIAN_GSM_IRQ			10
-#define GPIO11_MAGICIAN_GSM_OUT1		11
-#define GPIO13_MAGICIAN_CPLD_IRQ		13
-#define GPIO18_MAGICIAN_UNKNOWN			18
-#define GPIO22_MAGICIAN_VIBRA_EN		22
-#define GPIO26_MAGICIAN_GSM_POWER		26
-#define GPIO27_MAGICIAN_USBC_PUEN		27
-#define GPIO30_MAGICIAN_BQ24022_nCHARGE_EN	30
-#define GPIO37_MAGICIAN_KEY_HANGUP		37
-#define GPIO38_MAGICIAN_KEY_CONTACTS		38
-#define GPIO40_MAGICIAN_GSM_OUT2		40
-#define GPIO48_MAGICIAN_UNKNOWN			48
-#define GPIO56_MAGICIAN_UNKNOWN			56
-#define GPIO57_MAGICIAN_CAM_RESET		57
-#define GPIO75_MAGICIAN_SAMSUNG_POWER		75
-#define GPIO83_MAGICIAN_nIR_EN			83
-#define GPIO86_MAGICIAN_GSM_RESET		86
-#define GPIO87_MAGICIAN_GSM_SELECT		87
-#define GPIO90_MAGICIAN_KEY_CALENDAR		90
-#define GPIO91_MAGICIAN_KEY_CAMERA		91
-#define GPIO93_MAGICIAN_KEY_UP			93
-#define GPIO94_MAGICIAN_KEY_DOWN		94
-#define GPIO95_MAGICIAN_KEY_LEFT		95
-#define GPIO96_MAGICIAN_KEY_RIGHT		96
-#define GPIO97_MAGICIAN_KEY_ENTER		97
-#define GPIO98_MAGICIAN_KEY_RECORD		98
-#define GPIO99_MAGICIAN_HEADPHONE_IN		99
-#define GPIO100_MAGICIAN_KEY_VOL_UP		100
-#define GPIO101_MAGICIAN_KEY_VOL_DOWN 		101
-#define GPIO102_MAGICIAN_KEY_PHONE		102
-#define GPIO103_MAGICIAN_LED_KP			103
-#define GPIO104_MAGICIAN_LCD_POWER_1 		104
-#define GPIO105_MAGICIAN_LCD_POWER_2		105
-#define GPIO106_MAGICIAN_LCD_POWER_3		106
-#define GPIO107_MAGICIAN_DS1WM_IRQ		107
-#define GPIO108_MAGICIAN_GSM_READY		108
-#define GPIO114_MAGICIAN_UNKNOWN		114
-#define GPIO115_MAGICIAN_nPEN_IRQ		115
-#define GPIO116_MAGICIAN_nCAM_EN		116
-#define GPIO119_MAGICIAN_UNKNOWN		119
-#define GPIO120_MAGICIAN_UNKNOWN		120
-
-/*
- * CPLD IRQs
- */
-
-#define IRQ_MAGICIAN_SD		(IRQ_BOARD_START + 0)
-#define IRQ_MAGICIAN_EP		(IRQ_BOARD_START + 1)
-#define IRQ_MAGICIAN_BT		(IRQ_BOARD_START + 2)
-#define IRQ_MAGICIAN_VBUS	(IRQ_BOARD_START + 3)
-
-#define MAGICIAN_NR_IRQS	(IRQ_BOARD_START + 8)
-
-/*
- * CPLD EGPIOs
- */
-
-#define MAGICIAN_EGPIO_BASE			PXA_NR_BUILTIN_GPIO
-#define MAGICIAN_EGPIO(reg,bit) \
-	(MAGICIAN_EGPIO_BASE + 8*reg + bit)
-
-/* output */
-
-#define EGPIO_MAGICIAN_TOPPOLY_POWER		MAGICIAN_EGPIO(0, 2)
-#define EGPIO_MAGICIAN_LED_POWER		MAGICIAN_EGPIO(0, 5)
-#define EGPIO_MAGICIAN_GSM_RESET		MAGICIAN_EGPIO(0, 6)
-#define EGPIO_MAGICIAN_LCD_POWER		MAGICIAN_EGPIO(0, 7)
-#define EGPIO_MAGICIAN_SPK_POWER		MAGICIAN_EGPIO(1, 0)
-#define EGPIO_MAGICIAN_EP_POWER			MAGICIAN_EGPIO(1, 1)
-#define EGPIO_MAGICIAN_IN_SEL0			MAGICIAN_EGPIO(1, 2)
-#define EGPIO_MAGICIAN_IN_SEL1			MAGICIAN_EGPIO(1, 3)
-#define EGPIO_MAGICIAN_MIC_POWER		MAGICIAN_EGPIO(1, 4)
-#define EGPIO_MAGICIAN_CODEC_RESET		MAGICIAN_EGPIO(1, 5)
-#define EGPIO_MAGICIAN_CODEC_POWER		MAGICIAN_EGPIO(1, 6)
-#define EGPIO_MAGICIAN_BL_POWER			MAGICIAN_EGPIO(1, 7)
-#define EGPIO_MAGICIAN_SD_POWER			MAGICIAN_EGPIO(2, 0)
-#define EGPIO_MAGICIAN_CARKIT_MIC		MAGICIAN_EGPIO(2, 1)
-#define EGPIO_MAGICIAN_UNKNOWN_WAVEDEV_DLL	MAGICIAN_EGPIO(2, 2)
-#define EGPIO_MAGICIAN_FLASH_VPP		MAGICIAN_EGPIO(2, 3)
-#define EGPIO_MAGICIAN_BL_POWER2		MAGICIAN_EGPIO(2, 4)
-#define EGPIO_MAGICIAN_BQ24022_ISET2		MAGICIAN_EGPIO(2, 5)
-#define EGPIO_MAGICIAN_GSM_POWER		MAGICIAN_EGPIO(2, 7)
-
-/* input */
-
-#define EGPIO_MAGICIAN_CABLE_STATE_AC		MAGICIAN_EGPIO(4, 0)
-#define EGPIO_MAGICIAN_CABLE_STATE_USB		MAGICIAN_EGPIO(4, 1)
-
-#define EGPIO_MAGICIAN_BOARD_ID0		MAGICIAN_EGPIO(5, 0)
-#define EGPIO_MAGICIAN_BOARD_ID1		MAGICIAN_EGPIO(5, 1)
-#define EGPIO_MAGICIAN_BOARD_ID2		MAGICIAN_EGPIO(5, 2)
-#define EGPIO_MAGICIAN_LCD_SELECT		MAGICIAN_EGPIO(5, 3)
-#define EGPIO_MAGICIAN_nSD_READONLY		MAGICIAN_EGPIO(5, 4)
-
-#define EGPIO_MAGICIAN_EP_INSERT		MAGICIAN_EGPIO(6, 1)
-
-#endif /* _MAGICIAN_H_ */
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/mainstone.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/mainstone.h
deleted file mode 100644
index 1bfc4e82..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/mainstone.h
+++ /dev/null
@@ -1,141 +0,0 @@
-/*
- *  arch/arm/mach-pxa/include/mach/mainstone.h
- *
- *  Author:	Nicolas Pitre
- *  Created:	Nov 14, 2002
- *  Copyright:	MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef ASM_ARCH_MAINSTONE_H
-#define ASM_ARCH_MAINSTONE_H
-
-#include <mach/irqs.h>
-
-#define MST_ETH_PHYS		PXA_CS4_PHYS
-
-#define MST_FPGA_PHYS		PXA_CS2_PHYS
-#define MST_FPGA_VIRT		(0xf0000000)
-#define MST_P2V(x)		((x) - MST_FPGA_PHYS + MST_FPGA_VIRT)
-#define MST_V2P(x)		((x) - MST_FPGA_VIRT + MST_FPGA_PHYS)
-
-#ifndef __ASSEMBLY__
-# define __MST_REG(x)		(*((volatile unsigned long *)MST_P2V(x)))
-#else
-# define __MST_REG(x)		MST_P2V(x)
-#endif
-
-/* board level registers in the FPGA */
-
-#define MST_LEDDAT1		__MST_REG(0x08000010)
-#define MST_LEDDAT2		__MST_REG(0x08000014)
-#define MST_LEDCTRL		__MST_REG(0x08000040)
-#define MST_GPSWR		__MST_REG(0x08000060)
-#define MST_MSCWR1		__MST_REG(0x08000080)
-#define MST_MSCWR2		__MST_REG(0x08000084)
-#define MST_MSCWR3		__MST_REG(0x08000088)
-#define MST_MSCRD		__MST_REG(0x08000090)
-#define MST_INTMSKENA		__MST_REG(0x080000c0)
-#define MST_INTSETCLR		__MST_REG(0x080000d0)
-#define MST_PCMCIA0		__MST_REG(0x080000e0)
-#define MST_PCMCIA1		__MST_REG(0x080000e4)
-
-#define MST_MSCWR1_CAMERA_ON	(1 << 15)  /* Camera interface power control */
-#define MST_MSCWR1_CAMERA_SEL	(1 << 14)  /* Camera interface mux control */
-#define MST_MSCWR1_LCD_CTL	(1 << 13)  /* General-purpose LCD control */
-#define MST_MSCWR1_MS_ON	(1 << 12)  /* Memory Stick power control */
-#define MST_MSCWR1_MMC_ON	(1 << 11)  /* MultiMediaCard* power control */
-#define MST_MSCWR1_MS_SEL	(1 << 10)  /* SD/MS multiplexer control */
-#define MST_MSCWR1_BB_SEL	(1 << 9)   /* PCMCIA/Baseband multiplexer */
-#define MST_MSCWR1_BT_ON	(1 << 8)   /* Bluetooth UART transceiver */
-#define MST_MSCWR1_BTDTR	(1 << 7)   /* Bluetooth UART DTR */
-
-#define MST_MSCWR1_IRDA_MASK	(3 << 5)   /* IrDA transceiver mode */
-#define MST_MSCWR1_IRDA_FULL	(0 << 5)   /* full distance power */
-#define MST_MSCWR1_IRDA_OFF	(1 << 5)   /* shutdown */
-#define MST_MSCWR1_IRDA_MED	(2 << 5)   /* 2/3 distance power */
-#define MST_MSCWR1_IRDA_LOW	(3 << 5)   /* 1/3 distance power */
-
-#define MST_MSCWR1_IRDA_FIR	(1 << 4)   /* IrDA transceiver SIR/FIR */
-#define MST_MSCWR1_GREENLED	(1 << 3)   /* LED D1 control */
-#define MST_MSCWR1_PDC_CTL	(1 << 2)   /* reserved */
-#define MST_MSCWR1_MTR_ON	(1 << 1)   /* Silent alert motor */
-#define MST_MSCWR1_SYSRESET	(1 << 0)   /* System reset */
-
-#define MST_MSCWR2_USB_OTG_RST	(1 << 6)   /* USB On The Go reset */
-#define MST_MSCWR2_USB_OTG_SEL	(1 << 5)   /* USB On The Go control */
-#define MST_MSCWR2_nUSBC_SC	(1 << 4)   /* USB client soft connect control */
-#define MST_MSCWR2_I2S_SPKROFF	(1 << 3)   /* I2S CODEC amplifier control */
-#define MST_MSCWR2_AC97_SPKROFF	(1 << 2)   /* AC97 CODEC amplifier control */
-#define MST_MSCWR2_RADIO_PWR	(1 << 1)   /* Radio module power control */
-#define MST_MSCWR2_RADIO_WAKE	(1 << 0)   /* Radio module wake-up signal */
-
-#define MST_MSCWR3_GPIO_RESET_EN	(1 << 2) /* Enable GPIO Reset */
-#define MST_MSCWR3_GPIO_RESET		(1 << 1) /* Initiate a GPIO Reset */
-#define MST_MSCWR3_COMMS_SW_RESET	(1 << 0) /* Communications Processor Reset Control */
-
-#define MST_MSCRD_nPENIRQ	(1 << 9)   /* ADI7873* nPENIRQ signal */
-#define MST_MSCRD_nMEMSTK_CD	(1 << 8)   /* Memory Stick detection signal */
-#define MST_MSCRD_nMMC_CD	(1 << 7)   /* SD/MMC card detection signal */
-#define MST_MSCRD_nUSIM_CD	(1 << 6)   /* USIM card detection signal */
-#define MST_MSCRD_USB_CBL	(1 << 5)   /* USB client cable status */
-#define MST_MSCRD_TS_BUSY	(1 << 4)   /* ADI7873 busy */
-#define MST_MSCRD_BTDSR		(1 << 3)   /* Bluetooth UART DSR */
-#define MST_MSCRD_BTRI		(1 << 2)   /* Bluetooth UART Ring Indicator */
-#define MST_MSCRD_BTDCD		(1 << 1)   /* Bluetooth UART DCD */
-#define MST_MSCRD_nMMC_WP	(1 << 0)   /* SD/MMC write-protect status */
-
-#define MST_INT_S1_IRQ		(1 << 15)  /* PCMCIA socket 1 IRQ */
-#define MST_INT_S1_STSCHG	(1 << 14)  /* PCMCIA socket 1 status changed */
-#define MST_INT_S1_CD		(1 << 13)  /* PCMCIA socket 1 card detection */
-#define MST_INT_S0_IRQ		(1 << 11)  /* PCMCIA socket 0 IRQ */
-#define MST_INT_S0_STSCHG	(1 << 10)  /* PCMCIA socket 0 status changed */
-#define MST_INT_S0_CD		(1 << 9)   /* PCMCIA socket 0 card detection */
-#define MST_INT_nEXBRD_INT	(1 << 7)   /* Expansion board IRQ */
-#define MST_INT_MSINS		(1 << 6)   /* Memory Stick* detection */
-#define MST_INT_PENIRQ		(1 << 5)   /* ADI7873* touch-screen IRQ */
-#define MST_INT_AC97		(1 << 4)   /* AC'97 CODEC IRQ */
-#define MST_INT_ETHERNET	(1 << 3)   /* Ethernet controller IRQ */
-#define MST_INT_USBC		(1 << 2)   /* USB client cable detection IRQ */
-#define MST_INT_USIM		(1 << 1)   /* USIM card detection IRQ */
-#define MST_INT_MMC		(1 << 0)   /* MMC/SD card detection IRQ */
-
-#define MST_PCMCIA_nIRQ		(1 << 10)  /* IRQ / ready signal */
-#define MST_PCMCIA_nSPKR_BVD2	(1 << 9)   /* VDD sense / digital speaker */
-#define MST_PCMCIA_nSTSCHG_BVD1	(1 << 8)   /* VDD sense / card status changed */
-#define MST_PCMCIA_nVS2		(1 << 7)   /* VSS voltage sense */
-#define MST_PCMCIA_nVS1		(1 << 6)   /* VSS voltage sense */
-#define MST_PCMCIA_nCD		(1 << 5)   /* Card detection signal */
-#define MST_PCMCIA_RESET	(1 << 4)   /* Card reset signal */
-#define MST_PCMCIA_PWR_MASK	(0x000f)   /* MAX1602 power-supply controls */
-
-#define MST_PCMCIA_PWR_VPP_0    0x0	   /* voltage VPP = 0V */
-#define MST_PCMCIA_PWR_VPP_120  0x2 	   /* voltage VPP = 12V*/
-#define MST_PCMCIA_PWR_VPP_VCC  0x1	   /* voltage VPP = VCC */
-#define MST_PCMCIA_PWR_VCC_0    0x0	   /* voltage VCC = 0V */
-#define MST_PCMCIA_PWR_VCC_33   0x8	   /* voltage VCC = 3.3V */
-#define MST_PCMCIA_PWR_VCC_50   0x4	   /* voltage VCC = 5.0V */
-
-/* board specific IRQs */
-#define MAINSTONE_IRQ(x)	(IRQ_BOARD_START + (x))
-#define MAINSTONE_MMC_IRQ	MAINSTONE_IRQ(0)
-#define MAINSTONE_USIM_IRQ	MAINSTONE_IRQ(1)
-#define MAINSTONE_USBC_IRQ	MAINSTONE_IRQ(2)
-#define MAINSTONE_ETHERNET_IRQ	MAINSTONE_IRQ(3)
-#define MAINSTONE_AC97_IRQ	MAINSTONE_IRQ(4)
-#define MAINSTONE_PEN_IRQ	MAINSTONE_IRQ(5)
-#define MAINSTONE_MSINS_IRQ	MAINSTONE_IRQ(6)
-#define MAINSTONE_EXBRD_IRQ	MAINSTONE_IRQ(7)
-#define MAINSTONE_S0_CD_IRQ	MAINSTONE_IRQ(9)
-#define MAINSTONE_S0_STSCHG_IRQ	MAINSTONE_IRQ(10)
-#define MAINSTONE_S0_IRQ	MAINSTONE_IRQ(11)
-#define MAINSTONE_S1_CD_IRQ	MAINSTONE_IRQ(13)
-#define MAINSTONE_S1_STSCHG_IRQ	MAINSTONE_IRQ(14)
-#define MAINSTONE_S1_IRQ	MAINSTONE_IRQ(15)
-
-#define MAINSTONE_NR_IRQS	(IRQ_BOARD_START + 16)
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h
deleted file mode 100644
index cafadc33..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h
+++ /dev/null
@@ -1,225 +0,0 @@
-#ifndef __ASM_ARCH_MFP_PXA25X_H
-#define __ASM_ARCH_MFP_PXA25X_H
-
-#include <mach/mfp-pxa2xx.h>
-
-/* GPIO */
-#define GPIO2_GPIO		MFP_CFG_IN(GPIO2, AF0)
-#define GPIO3_GPIO		MFP_CFG_IN(GPIO3, AF0)
-#define GPIO4_GPIO		MFP_CFG_IN(GPIO4, AF0)
-#define GPIO5_GPIO		MFP_CFG_IN(GPIO5, AF0)
-#define GPIO6_GPIO		MFP_CFG_IN(GPIO6, AF0)
-#define GPIO7_GPIO		MFP_CFG_IN(GPIO7, AF0)
-#define GPIO8_GPIO		MFP_CFG_IN(GPIO8, AF0)
-
-#define GPIO1_RST		MFP_CFG_IN(GPIO1, AF1)
-
-/* Crystal and Clock Signals */
-#define GPIO10_RTCCLK		MFP_CFG_OUT(GPIO10, AF1, DRIVE_LOW)
-#define GPIO70_RTCCLK		MFP_CFG_OUT(GPIO70, AF1, DRIVE_LOW)
-#define GPIO7_48MHz		MFP_CFG_OUT(GPIO7,  AF1, DRIVE_LOW)
-#define GPIO11_3_6MHz		MFP_CFG_OUT(GPIO11, AF1, DRIVE_LOW)
-#define GPIO71_3_6MHz		MFP_CFG_OUT(GPIO71, AF1, DRIVE_LOW)
-#define GPIO12_32KHz		MFP_CFG_OUT(GPIO12, AF1, DRIVE_LOW)
-#define GPIO72_32kHz		MFP_CFG_OUT(GPIO72, AF1, DRIVE_LOW)
-
-/* SDRAM and Static Memory I/O Signals */
-#define GPIO15_nCS_1		MFP_CFG_OUT(GPIO15, AF2, DRIVE_HIGH)
-#define GPIO78_nCS_2		MFP_CFG_OUT(GPIO78, AF2, DRIVE_HIGH)
-#define GPIO79_nCS_3		MFP_CFG_OUT(GPIO79, AF2, DRIVE_HIGH)
-#define GPIO80_nCS_4		MFP_CFG_OUT(GPIO80, AF2, DRIVE_HIGH)
-#define GPIO33_nCS_5		MFP_CFG_OUT(GPIO33, AF2, DRIVE_HIGH)
-
-/* Miscellaneous I/O and DMA Signals */
-#define GPIO18_RDY		MFP_CFG_IN(GPIO18, AF1)
-#define GPIO20_DREQ_0		MFP_CFG_IN(GPIO20, AF1)
-#define GPIO19_DREQ_1		MFP_CFG_IN(GPIO19, AF1)
-
-/* Alternate Bus Master Mode I/O Signals */
-#define GPIO13_MBGNT		MFP_CFG_OUT(GPIO13, AF2, DRIVE_LOW)
-#define GPIO73_MBGNT		MFP_CFG_OUT(GPIO73, AF1, DRIVE_LOW)
-#define GPIO14_MBREQ		MFP_CFG_IN(GPIO14, AF1)
-#define GPIO66_MBREQ		MFP_CFG_IN(GPIO66, AF1)
-
-/* PC CARD */
-#define GPIO52_nPCE_1		MFP_CFG_OUT(GPIO52, AF2, DRIVE_HIGH)
-#define GPIO53_nPCE_2		MFP_CFG_OUT(GPIO53, AF2, DRIVE_HIGH)
-#define GPIO55_nPREG		MFP_CFG_OUT(GPIO55, AF2, DRIVE_HIGH)
-#define GPIO50_nPIOR		MFP_CFG_OUT(GPIO50, AF2, DRIVE_HIGH)
-#define GPIO51_nPIOW		MFP_CFG_OUT(GPIO51, AF2, DRIVE_HIGH)
-#define GPIO49_nPWE		MFP_CFG_OUT(GPIO49, AF2, DRIVE_HIGH)
-#define GPIO48_nPOE		MFP_CFG_OUT(GPIO48, AF2, DRIVE_HIGH)
-#define GPIO57_nIOIS16		MFP_CFG_IN(GPIO57, AF1)
-#define GPIO56_nPWAIT		MFP_CFG_IN(GPIO56, AF1)
-#define GPIO54_nPSKTSEL		MFP_CFG_OUT(GPIO54, AF2, DRIVE_HIGH)
-
-/* FFUART */
-#define GPIO34_FFUART_RXD	MFP_CFG_IN(GPIO34, AF1)
-#define GPIO35_FFUART_CTS	MFP_CFG_IN(GPIO35, AF1)
-#define GPIO36_FFUART_DCD	MFP_CFG_IN(GPIO36, AF1)
-#define GPIO37_FFUART_DSR	MFP_CFG_IN(GPIO37, AF1)
-#define GPIO38_FFUART_RI	MFP_CFG_IN(GPIO38, AF1)
-#define GPIO39_FFUART_TXD	MFP_CFG_OUT(GPIO39, AF2, DRIVE_HIGH)
-#define GPIO40_FFUART_DTR	MFP_CFG_OUT(GPIO40, AF2, DRIVE_HIGH)
-#define GPIO41_FFUART_RTS	MFP_CFG_OUT(GPIO41, AF2, DRIVE_HIGH)
-
-/* BTUART */
-#define GPIO42_BTUART_RXD	MFP_CFG_IN(GPIO42, AF1)
-#define GPIO43_BTUART_TXD	MFP_CFG_OUT(GPIO43, AF2, DRIVE_HIGH)
-#define GPIO44_BTUART_CTS	MFP_CFG_IN(GPIO44, AF1)
-#define GPIO45_BTUART_RTS	MFP_CFG_OUT(GPIO45, AF2, DRIVE_HIGH)
-
-/* STUART */
-#define GPIO46_STUART_RXD	MFP_CFG_IN(GPIO46, AF2)
-#define GPIO47_STUART_TXD	MFP_CFG_OUT(GPIO47, AF1, DRIVE_HIGH)
-
-/* HWUART */
-#define GPIO42_HWUART_RXD	MFP_CFG_IN(GPIO42, AF3)
-#define GPIO43_HWUART_TXD	MFP_CFG_OUT(GPIO43, AF3, DRIVE_HIGH)
-#define GPIO44_HWUART_CTS	MFP_CFG_IN(GPIO44, AF3)
-#define GPIO45_HWUART_RTS	MFP_CFG_OUT(GPIO45, AF3, DRIVE_HIGH)
-#define GPIO48_HWUART_TXD	MFP_CFG_OUT(GPIO48, AF1, DRIVE_HIGH)
-#define GPIO49_HWUART_RXD	MFP_CFG_IN(GPIO49, AF1)
-#define GPIO50_HWUART_CTS	MFP_CFG_IN(GPIO50, AF1)
-#define GPIO51_HWUART_RTS	MFP_CFG_OUT(GPIO51, AF1, DRIVE_HIGH)
-
-/* FICP */
-#define GPIO46_FICP_RXD		MFP_CFG_IN(GPIO46, AF1)
-#define GPIO47_FICP_TXD		MFP_CFG_OUT(GPIO47, AF2, DRIVE_HIGH)
-
-/* PWM 0/1 */
-#define GPIO16_PWM0_OUT		MFP_CFG_OUT(GPIO16, AF2, DRIVE_LOW)
-#define GPIO17_PWM1_OUT		MFP_CFG_OUT(GPIO17, AF2, DRIVE_LOW)
-
-/* AC97 */
-#define GPIO28_AC97_BITCLK	MFP_CFG_IN(GPIO28, AF1)
-#define GPIO29_AC97_SDATA_IN_0	MFP_CFG_IN(GPIO29, AF1)
-#define GPIO30_AC97_SDATA_OUT	MFP_CFG_OUT(GPIO30, AF2, DRIVE_LOW)
-#define GPIO31_AC97_SYNC	MFP_CFG_OUT(GPIO31, AF2, DRIVE_LOW)
-#define GPIO32_AC97_SDATA_IN_1	MFP_CFG_IN(GPIO32, AF1)
-
-/* I2S */
-#define GPIO28_I2S_BITCLK_IN	MFP_CFG_IN(GPIO28, AF2)
-#define GPIO28_I2S_BITCLK_OUT	MFP_CFG_OUT(GPIO28, AF1, DRIVE_LOW)
-#define GPIO29_I2S_SDATA_IN	MFP_CFG_IN(GPIO29, AF2)
-#define GPIO30_I2S_SDATA_OUT	MFP_CFG_OUT(GPIO30, AF1, DRIVE_LOW)
-#define GPIO31_I2S_SYNC		MFP_CFG_OUT(GPIO31, AF1, DRIVE_LOW)
-#define GPIO32_I2S_SYSCLK	MFP_CFG_OUT(GPIO32, AF1, DRIVE_LOW)
-
-/* SSP 1 */
-#define GPIO23_SSP1_SCLK	MFP_CFG_OUT(GPIO23, AF2, DRIVE_LOW)
-#define GPIO24_SSP1_SFRM	MFP_CFG_OUT(GPIO24, AF2, DRIVE_LOW)
-#define GPIO25_SSP1_TXD		MFP_CFG_OUT(GPIO25, AF2, DRIVE_LOW)
-#define GPIO26_SSP1_RXD		MFP_CFG_IN(GPIO26, AF1)
-#define GPIO27_SSP1_EXTCLK	MFP_CFG_IN(GPIO27, AF1)
-
-/* SSP 2 - NSSP */
-#define GPIO81_SSP2_CLK_OUT 	MFP_CFG_OUT(GPIO81, AF1, DRIVE_LOW)
-#define GPIO81_SSP2_CLK_IN  	MFP_CFG_IN(GPIO81, AF1)
-#define GPIO82_SSP2_FRM_OUT 	MFP_CFG_OUT(GPIO82, AF1, DRIVE_LOW)
-#define GPIO82_SSP2_FRM_IN  	MFP_CFG_IN(GPIO82, AF1)
-#define GPIO83_SSP2_TXD      	MFP_CFG_OUT(GPIO83, AF1, DRIVE_LOW)
-#define GPIO83_SSP2_RXD      	MFP_CFG_IN(GPIO83, AF2)
-#define GPIO84_SSP2_TXD      	MFP_CFG_OUT(GPIO84, AF1, DRIVE_LOW)
-#define GPIO84_SSP2_RXD      	MFP_CFG_IN(GPIO84, AF2)
-
-/* MMC */
-#define GPIO6_MMC_CLK		MFP_CFG_OUT(GPIO6, AF1, DRIVE_LOW)
-#define GPIO8_MMC_CS0		MFP_CFG_OUT(GPIO8, AF1, DRIVE_LOW)
-#define GPIO9_MMC_CS1		MFP_CFG_OUT(GPIO9, AF1, DRIVE_LOW)
-#define GPIO34_MMC_CS0		MFP_CFG_OUT(GPIO34, AF2, DRIVE_LOW)
-#define GPIO39_MMC_CS1		MFP_CFG_OUT(GPIO39, AF1, DRIVE_LOW)
-#define GPIO53_MMC_CLK		MFP_CFG_OUT(GPIO53, AF1, DRIVE_LOW)
-#define GPIO54_MMC_CLK		MFP_CFG_OUT(GPIO54, AF1, DRIVE_LOW)
-#define GPIO69_MMC_CLK		MFP_CFG_OUT(GPIO69, AF1, DRIVE_LOW)
-#define GPIO67_MMC_CS0		MFP_CFG_OUT(GPIO67, AF1, DRIVE_LOW)
-#define GPIO68_MMC_CS1		MFP_CFG_OUT(GPIO68, AF1, DRIVE_LOW)
-
-/* LCD */
-#define GPIO58_LCD_LDD_0	MFP_CFG_OUT(GPIO58, AF2, DRIVE_LOW)
-#define GPIO59_LCD_LDD_1	MFP_CFG_OUT(GPIO59, AF2, DRIVE_LOW)
-#define GPIO60_LCD_LDD_2	MFP_CFG_OUT(GPIO60, AF2, DRIVE_LOW)
-#define GPIO61_LCD_LDD_3	MFP_CFG_OUT(GPIO61, AF2, DRIVE_LOW)
-#define GPIO62_LCD_LDD_4	MFP_CFG_OUT(GPIO62, AF2, DRIVE_LOW)
-#define GPIO63_LCD_LDD_5	MFP_CFG_OUT(GPIO63, AF2, DRIVE_LOW)
-#define GPIO64_LCD_LDD_6	MFP_CFG_OUT(GPIO64, AF2, DRIVE_LOW)
-#define GPIO65_LCD_LDD_7	MFP_CFG_OUT(GPIO65, AF2, DRIVE_LOW)
-#define GPIO66_LCD_LDD_8	MFP_CFG_OUT(GPIO66, AF2, DRIVE_LOW)
-#define GPIO67_LCD_LDD_9	MFP_CFG_OUT(GPIO67, AF2, DRIVE_LOW)
-#define GPIO68_LCD_LDD_10	MFP_CFG_OUT(GPIO68, AF2, DRIVE_LOW)
-#define GPIO69_LCD_LDD_11	MFP_CFG_OUT(GPIO69, AF2, DRIVE_LOW)
-#define GPIO70_LCD_LDD_12	MFP_CFG_OUT(GPIO70, AF2, DRIVE_LOW)
-#define GPIO71_LCD_LDD_13	MFP_CFG_OUT(GPIO71, AF2, DRIVE_LOW)
-#define GPIO72_LCD_LDD_14	MFP_CFG_OUT(GPIO72, AF2, DRIVE_LOW)
-#define GPIO73_LCD_LDD_15	MFP_CFG_OUT(GPIO73, AF2, DRIVE_LOW)
-#define GPIO74_LCD_FCLK		MFP_CFG_OUT(GPIO74, AF2, DRIVE_LOW)
-#define GPIO75_LCD_LCLK		MFP_CFG_OUT(GPIO75, AF2, DRIVE_LOW)
-#define GPIO76_LCD_PCLK		MFP_CFG_OUT(GPIO76, AF2, DRIVE_LOW)
-#define GPIO77_LCD_BIAS		MFP_CFG_OUT(GPIO77, AF2, DRIVE_LOW)
-
-#ifdef CONFIG_CPU_PXA26x
-/* GPIO */
-#define GPIO85_GPIO		MFP_CFG_IN(GPIO85, AF0)
-#define GPIO86_GPIO		MFP_CFG_IN(GPIO86, AF1)
-#define GPIO87_GPIO		MFP_CFG_IN(GPIO87, AF1)
-#define GPIO88_GPIO		MFP_CFG_IN(GPIO88, AF1)
-#define GPIO89_GPIO		MFP_CFG_IN(GPIO89, AF1)
-
-/* SDRAM */
-#define GPIO86_nSDCS2		MFP_CFG_OUT(GPIO86, AF0, DRIVE_HIGH)
-#define GPIO87_nSDCS3		MFP_CFG_OUT(GPIO87, AF0, DRIVE_HIGH)
-#define GPIO88_RDnWR		MFP_CFG_OUT(GPIO88, AF0, DRIVE_HIGH)
-
-/* USB */
-#define GPIO9_USB_RCV		MFP_CFG_IN(GPIO9, AF1)
-#define GPIO32_USB_VP		MFP_CFG_IN(GPIO32, AF2)
-#define GPIO34_USB_VM		MFP_CFG_IN(GPIO34, AF2)
-#define GPIO39_USB_VPO		MFP_CFG_OUT(GPIO39, AF3, DRIVE_LOW)
-#define GPIO56_USB_VMO		MFP_CFG_OUT(GPIO56, AF1, DRIVE_LOW)
-#define GPIO57_USB_nOE		MFP_CFG_OUT(GPIO57, AF1, DRIVE_HIGH)
-
-/* ASSP */
-#define GPIO28_ASSP_BITCLK_IN	MFP_CFG_IN(GPIO28, AF3)
-#define GPIO28_ASSP_BITCLK_OUT	MFP_CFG_OUT(GPIO28, AF3, DRIVE_LOW)
-#define GPIO29_ASSP_RXD		MFP_CFG_IN(GPIO29, AF3)
-#define GPIO30_ASSP_TXD		MFP_CFG_OUT(GPIO30, AF3, DRIVE_LOW)
-#define GPIO31_ASSP_SFRM_IN	MFP_CFG_IN(GPIO31, AF1)
-#define GPIO31_ASSP_SFRM_OUT	MFP_CFG_OUT(GPIO31, AF3, DRIVE_LOW)
-
-/* AC97 */
-#define GPIO89_AC97_nRESET	MFP_CFG_OUT(GPIO89, AF0, DRIVE_HIGH)
-#endif	/* CONFIG_CPU_PXA26x */
-
-/* commonly used pin configurations */
-#define GPIOxx_LCD_16BPP	\
-	GPIO58_LCD_LDD_0,	\
-	GPIO59_LCD_LDD_1,	\
-	GPIO60_LCD_LDD_2,	\
-	GPIO61_LCD_LDD_3,	\
-	GPIO62_LCD_LDD_4,	\
-	GPIO63_LCD_LDD_5,	\
-	GPIO64_LCD_LDD_6,	\
-	GPIO65_LCD_LDD_7,	\
-	GPIO66_LCD_LDD_8,	\
-	GPIO67_LCD_LDD_9,	\
-	GPIO68_LCD_LDD_10,	\
-	GPIO69_LCD_LDD_11,	\
-	GPIO70_LCD_LDD_12,	\
-	GPIO71_LCD_LDD_13,	\
-	GPIO72_LCD_LDD_14,	\
-	GPIO73_LCD_LDD_15
-
-#define GPIOxx_LCD_DSTN_16BPP	\
-	GPIOxx_LCD_16BPP,	\
-	GPIO74_LCD_FCLK,	\
-	GPIO75_LCD_LCLK,	\
-	GPIO76_LCD_PCLK
-
-#define GPIOxx_LCD_TFT_16BPP	\
-	GPIOxx_LCD_16BPP,	\
-	GPIO74_LCD_FCLK,	\
-	GPIO75_LCD_LCLK,	\
-	GPIO76_LCD_PCLK,	\
-	GPIO77_LCD_BIAS
-
-#endif /* __ASM_ARCH_MFP_PXA25X_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h
deleted file mode 100644
index a6586720..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h
+++ /dev/null
@@ -1,467 +0,0 @@
-#ifndef __ASM_ARCH_MFP_PXA27X_H
-#define __ASM_ARCH_MFP_PXA27X_H
-
-/*
- * NOTE:  for those special-function bidirectional GPIOs, as described
- * in the "PXA27x Developer's Manual" Section 24.4.2.1, only its input
- * alternative is preserved, the direction is actually selected by the
- * specific controller, and this should work in most cases.
- */
-
-#include <mach/mfp-pxa2xx.h>
-
-/* Note: GPIO3/GPIO4 will be driven by Power I2C when PCFR/PI2C_EN
- * bit is set, regardless of the GPIO configuration
- */
-#define GPIO3_GPIO		MFP_CFG_IN(GPIO3, AF0)
-#define GPIO4_GPIO		MFP_CFG_IN(GPIO4, AF0)
-
-/* GPIO */
-#define GPIO85_GPIO		MFP_CFG_IN(GPIO85, AF0)
-#define GPIO86_GPIO		MFP_CFG_IN(GPIO86, AF0)
-#define GPIO87_GPIO		MFP_CFG_IN(GPIO87, AF0)
-#define GPIO88_GPIO		MFP_CFG_IN(GPIO88, AF0)
-#define GPIO89_GPIO		MFP_CFG_IN(GPIO89, AF0)
-#define GPIO90_GPIO		MFP_CFG_IN(GPIO90, AF0)
-#define GPIO91_GPIO		MFP_CFG_IN(GPIO91, AF0)
-#define GPIO92_GPIO		MFP_CFG_IN(GPIO92, AF0)
-#define GPIO93_GPIO		MFP_CFG_IN(GPIO93, AF0)
-#define GPIO94_GPIO		MFP_CFG_IN(GPIO94, AF0)
-#define GPIO95_GPIO		MFP_CFG_IN(GPIO95, AF0)
-#define GPIO96_GPIO		MFP_CFG_IN(GPIO96, AF0)
-#define GPIO97_GPIO		MFP_CFG_IN(GPIO97, AF0)
-#define GPIO98_GPIO		MFP_CFG_IN(GPIO98, AF0)
-#define GPIO99_GPIO		MFP_CFG_IN(GPIO99, AF0)
-#define GPIO100_GPIO		MFP_CFG_IN(GPIO100, AF0)
-#define GPIO101_GPIO		MFP_CFG_IN(GPIO101, AF0)
-#define GPIO102_GPIO		MFP_CFG_IN(GPIO102, AF0)
-#define GPIO103_GPIO		MFP_CFG_IN(GPIO103, AF0)
-#define GPIO104_GPIO		MFP_CFG_IN(GPIO104, AF0)
-#define GPIO105_GPIO		MFP_CFG_IN(GPIO105, AF0)
-#define GPIO106_GPIO		MFP_CFG_IN(GPIO106, AF0)
-#define GPIO107_GPIO		MFP_CFG_IN(GPIO107, AF0)
-#define GPIO108_GPIO		MFP_CFG_IN(GPIO108, AF0)
-#define GPIO109_GPIO		MFP_CFG_IN(GPIO109, AF0)
-#define GPIO110_GPIO		MFP_CFG_IN(GPIO110, AF0)
-#define GPIO111_GPIO		MFP_CFG_IN(GPIO111, AF0)
-#define GPIO112_GPIO		MFP_CFG_IN(GPIO112, AF0)
-#define GPIO113_GPIO		MFP_CFG_IN(GPIO113, AF0)
-#define GPIO114_GPIO		MFP_CFG_IN(GPIO114, AF0)
-#define GPIO115_GPIO		MFP_CFG_IN(GPIO115, AF0)
-#define GPIO116_GPIO		MFP_CFG_IN(GPIO116, AF0)
-#define GPIO117_GPIO		MFP_CFG_IN(GPIO117, AF0)
-#define GPIO118_GPIO		MFP_CFG_IN(GPIO118, AF0)
-#define GPIO119_GPIO		MFP_CFG_IN(GPIO119, AF0)
-#define GPIO120_GPIO		MFP_CFG_IN(GPIO120, AF0)
-
-/* Crystal and Clock Signals */
-#define GPIO9_HZ_CLK		MFP_CFG_OUT(GPIO9,  AF1, DRIVE_LOW)
-#define GPIO10_HZ_CLK		MFP_CFG_OUT(GPIO10, AF1, DRIVE_LOW)
-#define GPIO11_48_MHz		MFP_CFG_OUT(GPIO11, AF3, DRIVE_LOW)
-#define GPIO12_48_MHz		MFP_CFG_OUT(GPIO12, AF3, DRIVE_LOW)
-#define GPIO13_CLK_EXT		MFP_CFG_IN(GPIO13, AF1)
-
-/* OS Timer Signals */
-#define GPIO11_EXT_SYNC_0	MFP_CFG_IN(GPIO11, AF1)
-#define GPIO12_EXT_SYNC_1	MFP_CFG_IN(GPIO12, AF1)
-#define GPIO9_CHOUT_0		MFP_CFG_OUT(GPIO9,  AF3, DRIVE_LOW)
-#define GPIO10_CHOUT_1		MFP_CFG_OUT(GPIO10, AF3, DRIVE_LOW)
-#define GPIO11_CHOUT_0		MFP_CFG_OUT(GPIO11, AF1, DRIVE_LOW)
-#define GPIO12_CHOUT_1		MFP_CFG_OUT(GPIO12, AF1, DRIVE_LOW)
-
-/* SDRAM and Static Memory I/O Signals */
-#define GPIO20_nSDCS_2		MFP_CFG_OUT(GPIO20, AF1, DRIVE_HIGH)
-#define GPIO21_nSDCS_3		MFP_CFG_OUT(GPIO21, AF1, DRIVE_HIGH)
-#define GPIO15_nCS_1		MFP_CFG_OUT(GPIO15, AF2, DRIVE_HIGH)
-#define GPIO78_nCS_2		MFP_CFG_OUT(GPIO78, AF2, DRIVE_HIGH)
-#define GPIO79_nCS_3		MFP_CFG_OUT(GPIO79, AF2, DRIVE_HIGH)
-#define GPIO80_nCS_4		MFP_CFG_OUT(GPIO80, AF2, DRIVE_HIGH)
-#define GPIO33_nCS_5		MFP_CFG_OUT(GPIO33, AF2, DRIVE_HIGH)
-
-/* Miscellaneous I/O and DMA Signals */
-#define GPIO21_DVAL_0		MFP_CFG_OUT(GPIO21, AF2, DRIVE_HIGH)
-#define GPIO116_DVAL_0		MFP_CFG_OUT(GPIO116, AF1, DRIVE_HIGH)
-#define GPIO33_DVAL_1		MFP_CFG_OUT(GPIO33, AF1, DRIVE_HIGH)
-#define GPIO96_DVAL_1		MFP_CFG_OUT(GPIO96, AF2, DRIVE_HIGH)
-#define GPIO18_RDY		MFP_CFG_IN(GPIO18, AF1)
-#define GPIO20_DREQ_0		MFP_CFG_IN(GPIO20, AF1)
-#define GPIO115_DREQ_0		MFP_CFG_IN(GPIO115, AF1)
-#define GPIO80_DREQ_1		MFP_CFG_IN(GPIO80, AF1)
-#define GPIO97_DREQ_1		MFP_CFG_IN(GPIO97, AF2)
-#define GPIO85_DREQ_2		MFP_CFG_IN(GPIO85, AF2)
-#define GPIO100_DREQ_2		MFP_CFG_IN(GPIO100, AF2)
-
-/* Alternate Bus Master Mode I/O Signals */
-#define GPIO20_MBREQ		MFP_CFG_IN(GPIO20, AF2)
-#define GPIO80_MBREQ		MFP_CFG_IN(GPIO80, AF2)
-#define GPIO96_MBREQ		MFP_CFG_IN(GPIO96, AF2)
-#define GPIO115_MBREQ		MFP_CFG_IN(GPIO115, AF3)
-#define GPIO21_MBGNT		MFP_CFG_OUT(GPIO21, AF3, DRIVE_LOW)
-#define GPIO33_MBGNT		MFP_CFG_OUT(GPIO33, AF3, DRIVE_LOW)
-#define GPIO97_MBGNT		MFP_CFG_OUT(GPIO97, AF2, DRIVE_LOW)
-#define GPIO116_MBGNT		MFP_CFG_OUT(GPIO116, AF3, DRIVE_LOW)
-
-/* PC CARD */
-#define GPIO15_nPCE_1		MFP_CFG_OUT(GPIO15, AF1, DRIVE_HIGH)
-#define GPIO85_nPCE_1		MFP_CFG_OUT(GPIO85, AF1, DRIVE_HIGH)
-#define GPIO86_nPCE_1		MFP_CFG_OUT(GPIO86, AF1, DRIVE_HIGH)
-#define GPIO102_nPCE_1		MFP_CFG_OUT(GPIO102, AF1, DRIVE_HIGH)
-#define GPIO54_nPCE_2		MFP_CFG_OUT(GPIO54, AF2, DRIVE_HIGH)
-#define GPIO78_nPCE_2		MFP_CFG_OUT(GPIO78, AF1, DRIVE_HIGH)
-#define GPIO87_nPCE_2		MFP_CFG_IN(GPIO87, AF1)
-#define GPIO55_nPREG		MFP_CFG_OUT(GPIO55, AF2, DRIVE_HIGH)
-#define GPIO50_nPIOR		MFP_CFG_OUT(GPIO50, AF2, DRIVE_HIGH)
-#define GPIO51_nPIOW		MFP_CFG_OUT(GPIO51, AF2, DRIVE_HIGH)
-#define GPIO49_nPWE		MFP_CFG_OUT(GPIO49, AF2, DRIVE_HIGH)
-#define GPIO48_nPOE		MFP_CFG_OUT(GPIO48, AF2, DRIVE_HIGH)
-#define GPIO57_nIOIS16		MFP_CFG_IN(GPIO57, AF1)
-#define GPIO56_nPWAIT		MFP_CFG_IN(GPIO56, AF1)
-#define GPIO79_PSKTSEL		MFP_CFG_OUT(GPIO79, AF1, DRIVE_HIGH)
-#define GPIO104_PSKTSEL		MFP_CFG_OUT(GPIO104, AF1, DRIVE_HIGH)
-
-/* I2C */
-#define GPIO117_I2C_SCL		MFP_CFG_IN(GPIO117, AF1)
-#define GPIO118_I2C_SDA		MFP_CFG_IN(GPIO118, AF1)
-
-/* FFUART */
-#define GPIO9_FFUART_CTS	MFP_CFG_IN(GPIO9, AF3)
-#define GPIO26_FFUART_CTS	MFP_CFG_IN(GPIO26, AF3)
-#define GPIO35_FFUART_CTS	MFP_CFG_IN(GPIO35, AF1)
-#define GPIO100_FFUART_CTS	MFP_CFG_IN(GPIO100, AF3)
-#define GPIO10_FFUART_DCD	MFP_CFG_IN(GPIO10, AF1)
-#define GPIO36_FFUART_DCD	MFP_CFG_IN(GPIO36, AF1)
-#define GPIO33_FFUART_DSR	MFP_CFG_IN(GPIO33, AF2)
-#define GPIO37_FFUART_DSR	MFP_CFG_IN(GPIO37, AF1)
-#define GPIO38_FFUART_RI	MFP_CFG_IN(GPIO38, AF1)
-#define GPIO89_FFUART_RI	MFP_CFG_IN(GPIO89, AF3)
-#define GPIO19_FFUART_RXD	MFP_CFG_IN(GPIO19, AF3)
-#define GPIO33_FFUART_RXD	MFP_CFG_IN(GPIO33, AF1)
-#define GPIO34_FFUART_RXD	MFP_CFG_IN(GPIO34, AF1)
-#define GPIO41_FFUART_RXD	MFP_CFG_IN(GPIO41, AF1)
-#define GPIO53_FFUART_RXD	MFP_CFG_IN(GPIO53, AF1)
-#define GPIO85_FFUART_RXD	MFP_CFG_IN(GPIO85, AF1)
-#define GPIO96_FFUART_RXD	MFP_CFG_IN(GPIO96, AF3)
-#define GPIO102_FFUART_RXD	MFP_CFG_IN(GPIO102, AF3)
-#define GPIO16_FFUART_TXD	MFP_CFG_OUT(GPIO16, AF3, DRIVE_HIGH)
-#define GPIO37_FFUART_TXD	MFP_CFG_OUT(GPIO37, AF3, DRIVE_HIGH)
-#define GPIO39_FFUART_TXD	MFP_CFG_OUT(GPIO39, AF2, DRIVE_HIGH)
-#define GPIO83_FFUART_TXD	MFP_CFG_OUT(GPIO83, AF2, DRIVE_HIGH)
-#define GPIO99_FFUART_TXD	MFP_CFG_OUT(GPIO99, AF3, DRIVE_HIGH)
-#define GPIO27_FFUART_RTS	MFP_CFG_OUT(GPIO27, AF3, DRIVE_HIGH)
-#define GPIO41_FFUART_RTS	MFP_CFG_OUT(GPIO41, AF2, DRIVE_HIGH)
-#define GPIO83_FFUART_RTS	MFP_CFG_OUT(GPIO83, AF3, DRIVE_HIGH)
-#define GPIO98_FFUART_RTS	MFP_CFG_OUT(GPIO98, AF3, DRIVE_HIGH)
-#define GPIO40_FFUART_DTR	MFP_CFG_OUT(GPIO40, AF2, DRIVE_HIGH)
-#define GPIO82_FFUART_DTR	MFP_CFG_OUT(GPIO82, AF3, DRIVE_HIGH)
-
-/* BTUART */
-#define GPIO44_BTUART_CTS	MFP_CFG_IN(GPIO44, AF1)
-#define GPIO42_BTUART_RXD	MFP_CFG_IN(GPIO42, AF1)
-#define GPIO45_BTUART_RTS	MFP_CFG_OUT(GPIO45, AF2, DRIVE_HIGH)
-#define GPIO45_BTUART_RTS_LPM_LOW	MFP_CFG_OUT(GPIO45, AF2, DRIVE_LOW)
-#define GPIO43_BTUART_TXD	MFP_CFG_OUT(GPIO43, AF2, DRIVE_HIGH)
-#define GPIO43_BTUART_TXD_LPM_LOW	MFP_CFG_OUT(GPIO43, AF2, DRIVE_LOW)
-
-/* STUART */
-#define GPIO46_STUART_RXD	MFP_CFG_IN(GPIO46, AF2)
-#define GPIO47_STUART_TXD	MFP_CFG_OUT(GPIO47, AF1, DRIVE_HIGH)
-
-/* FICP */
-#define GPIO42_FICP_RXD		MFP_CFG_IN(GPIO42, AF2)
-#define GPIO46_FICP_RXD		MFP_CFG_IN(GPIO46, AF1)
-#define GPIO43_FICP_TXD		MFP_CFG_OUT(GPIO43, AF1, DRIVE_HIGH)
-#define GPIO47_FICP_TXD		MFP_CFG_OUT(GPIO47, AF2, DRIVE_HIGH)
-
-/* PWM 0/1/2/3 */
-#define GPIO11_PWM2_OUT		MFP_CFG_OUT(GPIO11, AF2, DRIVE_LOW)
-#define GPIO12_PWM3_OUT		MFP_CFG_OUT(GPIO12, AF2, DRIVE_LOW)
-#define GPIO16_PWM0_OUT		MFP_CFG_OUT(GPIO16, AF2, DRIVE_LOW)
-#define GPIO17_PWM1_OUT		MFP_CFG_OUT(GPIO17, AF2, DRIVE_LOW)
-#define GPIO38_PWM1_OUT		MFP_CFG_OUT(GPIO38, AF3, DRIVE_LOW)
-#define GPIO46_PWM2_OUT		MFP_CFG_OUT(GPIO46, AF2, DRIVE_LOW)
-#define GPIO47_PWM3_OUT		MFP_CFG_OUT(GPIO47, AF3, DRIVE_LOW)
-#define GPIO79_PWM2_OUT		MFP_CFG_OUT(GPIO79, AF3, DRIVE_LOW)
-#define GPIO80_PWM3_OUT		MFP_CFG_OUT(GPIO80, AF3, DRIVE_LOW)
-#define GPIO115_PWM1_OUT	MFP_CFG_OUT(GPIO115, AF3, DRIVE_LOW)
-
-/* AC97 */
-#define GPIO31_AC97_SYNC	MFP_CFG_OUT(GPIO31, AF2, DRIVE_LOW)
-#define GPIO94_AC97_SYNC	MFP_CFG_OUT(GPIO94, AF1, DRIVE_LOW)
-#define GPIO30_AC97_SDATA_OUT	MFP_CFG_OUT(GPIO30, AF2, DRIVE_LOW)
-#define GPIO93_AC97_SDATA_OUT	MFP_CFG_OUT(GPIO93, AF1, DRIVE_LOW)
-#define GPIO45_AC97_SYSCLK	MFP_CFG_OUT(GPIO45, AF1, DRIVE_LOW)
-#define GPIO89_AC97_SYSCLK	MFP_CFG_OUT(GPIO89, AF1, DRIVE_LOW)
-#define GPIO98_AC97_SYSCLK	MFP_CFG_OUT(GPIO98, AF1, DRIVE_LOW)
-#define GPIO95_AC97_nRESET	MFP_CFG_OUT(GPIO95, AF1, DRIVE_LOW)
-#define GPIO113_AC97_nRESET	MFP_CFG_OUT(GPIO113, AF2, DRIVE_LOW)
-#define GPIO28_AC97_BITCLK	MFP_CFG_IN(GPIO28, AF1)
-#define GPIO29_AC97_SDATA_IN_0	MFP_CFG_IN(GPIO29, AF1)
-#define GPIO116_AC97_SDATA_IN_0	MFP_CFG_IN(GPIO116, AF2)
-#define GPIO99_AC97_SDATA_IN_1	MFP_CFG_IN(GPIO99, AF2)
-
-/* I2S */
-#define GPIO28_I2S_BITCLK_IN	MFP_CFG_IN(GPIO28, AF2)
-#define GPIO28_I2S_BITCLK_OUT	MFP_CFG_OUT(GPIO28, AF1, DRIVE_LOW)
-#define GPIO29_I2S_SDATA_IN	MFP_CFG_IN(GPIO29, AF2)
-#define GPIO30_I2S_SDATA_OUT	MFP_CFG_OUT(GPIO30, AF1, DRIVE_LOW)
-#define GPIO31_I2S_SYNC		MFP_CFG_OUT(GPIO31, AF1, DRIVE_LOW)
-#define GPIO113_I2S_SYSCLK	MFP_CFG_OUT(GPIO113, AF1, DRIVE_LOW)
-
-/* SSP 1 */
-#define GPIO23_SSP1_SCLK	MFP_CFG_OUT(GPIO23, AF2, DRIVE_LOW)
-#define GPIO29_SSP1_SCLK	MFP_CFG_IN(GPIO29, AF3)
-#define GPIO27_SSP1_SYSCLK	MFP_CFG_OUT(GPIO27, AF1, DRIVE_LOW)
-#define GPIO53_SSP1_SYSCLK	MFP_CFG_OUT(GPIO53, AF3, DRIVE_LOW)
-#define GPIO24_SSP1_SFRM	MFP_CFG_IN(GPIO24, AF2)
-#define GPIO28_SSP1_SFRM	MFP_CFG_IN(GPIO28, AF3)
-#define GPIO25_SSP1_TXD		MFP_CFG_OUT(GPIO25, AF2, DRIVE_LOW)
-#define GPIO57_SSP1_TXD		MFP_CFG_OUT(GPIO57, AF3, DRIVE_LOW)
-#define GPIO26_SSP1_RXD		MFP_CFG_IN(GPIO26, AF1)
-#define GPIO27_SSP1_SCLKEN	MFP_CFG_IN(GPIO27, AF2)
-
-/* SSP 2 */
-#define GPIO19_SSP2_SCLK	MFP_CFG_IN(GPIO19, AF1)
-#define GPIO22_SSP2_SCLK	MFP_CFG_IN(GPIO22, AF3)
-#define GPIO29_SSP2_SCLK	MFP_CFG_OUT(GPIO29, AF3, DRIVE_LOW)
-#define GPIO36_SSP2_SCLK	MFP_CFG_IN(GPIO36, AF2)
-#define GPIO50_SSP2_SCLK	MFP_CFG_IN(GPIO50, AF3)
-#define GPIO22_SSP2_SYSCLK	MFP_CFG_OUT(GPIO22, AF2, DRIVE_LOW)
-#define GPIO14_SSP2_SFRM	MFP_CFG_IN(GPIO14, AF2)
-#define GPIO37_SSP2_SFRM	MFP_CFG_IN(GPIO37, AF2)
-#define GPIO87_SSP2_SFRM	MFP_CFG_OUT(GPIO87, AF3, DRIVE_LOW)
-#define GPIO88_SSP2_SFRM	MFP_CFG_IN(GPIO88, AF3)
-#define GPIO13_SSP2_TXD		MFP_CFG_OUT(GPIO13, AF1, DRIVE_LOW)
-#define GPIO38_SSP2_TXD		MFP_CFG_OUT(GPIO38, AF2, DRIVE_LOW)
-#define GPIO87_SSP2_TXD		MFP_CFG_OUT(GPIO87, AF1, DRIVE_LOW)
-#define GPIO89_SSP2_TXD		MFP_CFG_OUT(GPIO89, AF3, DRIVE_LOW)
-#define GPIO11_SSP2_RXD		MFP_CFG_IN(GPIO11, AF2)
-#define GPIO29_SSP2_RXD		MFP_CFG_OUT(GPIO29, AF1, DRIVE_LOW)
-#define GPIO40_SSP2_RXD		MFP_CFG_IN(GPIO40, AF1)
-#define GPIO86_SSP2_RXD		MFP_CFG_IN(GPIO86, AF1)
-#define GPIO88_SSP2_RXD		MFP_CFG_IN(GPIO88, AF2)
-#define GPIO22_SSP2_EXTCLK	MFP_CFG_IN(GPIO22, AF1)
-#define GPIO27_SSP2_EXTCLK	MFP_CFG_IN(GPIO27, AF1)
-#define GPIO22_SSP2_SCLKEN	MFP_CFG_IN(GPIO22, AF2)
-#define GPIO23_SSP2_SCLKEN	MFP_CFG_IN(GPIO23, AF2)
-
-/* SSP 3 */
-#define GPIO34_SSP3_SCLK	MFP_CFG_IN(GPIO34, AF3)
-#define GPIO40_SSP3_SCLK	MFP_CFG_OUT(GPIO40, AF3, DRIVE_LOW)
-#define GPIO52_SSP3_SCLK	MFP_CFG_IN(GPIO52, AF2)
-#define GPIO84_SSP3_SCLK	MFP_CFG_IN(GPIO84, AF1)
-#define GPIO45_SSP3_SYSCLK	MFP_CFG_OUT(GPIO45, AF3, DRIVE_LOW)
-#define GPIO35_SSP3_SFRM	MFP_CFG_IN(GPIO35, AF3)
-#define GPIO39_SSP3_SFRM	MFP_CFG_IN(GPIO39, AF3)
-#define GPIO83_SSP3_SFRM	MFP_CFG_IN(GPIO83, AF1)
-#define GPIO35_SSP3_TXD		MFP_CFG_OUT(GPIO35, AF3, DRIVE_LOW)
-#define GPIO38_SSP3_TXD		MFP_CFG_OUT(GPIO38, AF1, DRIVE_LOW)
-#define GPIO81_SSP3_TXD		MFP_CFG_OUT(GPIO81, AF1, DRIVE_LOW)
-#define GPIO41_SSP3_RXD		MFP_CFG_IN(GPIO41, AF3)
-#define GPIO82_SSP3_RXD		MFP_CFG_IN(GPIO82, AF1)
-#define GPIO89_SSP3_RXD		MFP_CFG_IN(GPIO89, AF1)
-
-/* MMC */
-#define GPIO32_MMC_CLK		MFP_CFG_OUT(GPIO32, AF2, DRIVE_LOW)
-#define GPIO92_MMC_DAT_0	MFP_CFG_IN(GPIO92, AF1)
-#define GPIO109_MMC_DAT_1	MFP_CFG_IN(GPIO109, AF1)
-#define GPIO110_MMC_DAT_2	MFP_CFG_IN(GPIO110, AF1)
-#define GPIO111_MMC_DAT_3	MFP_CFG_IN(GPIO111, AF1)
-#define GPIO112_MMC_CMD		MFP_CFG_IN(GPIO112, AF1)
-
-/* LCD */
-#define GPIO58_LCD_LDD_0	MFP_CFG_OUT(GPIO58, AF2, DRIVE_LOW)
-#define GPIO59_LCD_LDD_1	MFP_CFG_OUT(GPIO59, AF2, DRIVE_LOW)
-#define GPIO60_LCD_LDD_2	MFP_CFG_OUT(GPIO60, AF2, DRIVE_LOW)
-#define GPIO61_LCD_LDD_3	MFP_CFG_OUT(GPIO61, AF2, DRIVE_LOW)
-#define GPIO62_LCD_LDD_4	MFP_CFG_OUT(GPIO62, AF2, DRIVE_LOW)
-#define GPIO63_LCD_LDD_5	MFP_CFG_OUT(GPIO63, AF2, DRIVE_LOW)
-#define GPIO64_LCD_LDD_6	MFP_CFG_OUT(GPIO64, AF2, DRIVE_LOW)
-#define GPIO65_LCD_LDD_7	MFP_CFG_OUT(GPIO65, AF2, DRIVE_LOW)
-#define GPIO66_LCD_LDD_8	MFP_CFG_OUT(GPIO66, AF2, DRIVE_LOW)
-#define GPIO67_LCD_LDD_9	MFP_CFG_OUT(GPIO67, AF2, DRIVE_LOW)
-#define GPIO68_LCD_LDD_10	MFP_CFG_OUT(GPIO68, AF2, DRIVE_LOW)
-#define GPIO69_LCD_LDD_11	MFP_CFG_OUT(GPIO69, AF2, DRIVE_LOW)
-#define GPIO70_LCD_LDD_12	MFP_CFG_OUT(GPIO70, AF2, DRIVE_LOW)
-#define GPIO71_LCD_LDD_13	MFP_CFG_OUT(GPIO71, AF2, DRIVE_LOW)
-#define GPIO72_LCD_LDD_14	MFP_CFG_OUT(GPIO72, AF2, DRIVE_LOW)
-#define GPIO73_LCD_LDD_15	MFP_CFG_OUT(GPIO73, AF2, DRIVE_LOW)
-#define GPIO86_LCD_LDD_16	MFP_CFG_OUT(GPIO86, AF2, DRIVE_LOW)
-#define GPIO87_LCD_LDD_17	MFP_CFG_OUT(GPIO87, AF2, DRIVE_LOW)
-#define GPIO74_LCD_FCLK		MFP_CFG_OUT(GPIO74, AF2, DRIVE_LOW)
-#define GPIO75_LCD_LCLK		MFP_CFG_OUT(GPIO75, AF2, DRIVE_LOW)
-#define GPIO76_LCD_PCLK		MFP_CFG_OUT(GPIO76, AF2, DRIVE_LOW)
-#define GPIO77_LCD_BIAS		MFP_CFG_OUT(GPIO77, AF2, DRIVE_LOW)
-#define GPIO14_LCD_VSYNC	MFP_CFG_IN(GPIO14, AF1)
-#define GPIO19_LCD_CS		MFP_CFG_OUT(GPIO19, AF2, DRIVE_LOW)
-
-/* Keypad */
-#define GPIO93_KP_DKIN_0	MFP_CFG_IN(GPIO93, AF1)
-#define GPIO94_KP_DKIN_1	MFP_CFG_IN(GPIO94, AF1)
-#define GPIO95_KP_DKIN_2	MFP_CFG_IN(GPIO95, AF1)
-#define GPIO96_KP_DKIN_3	MFP_CFG_IN(GPIO96, AF1)
-#define GPIO97_KP_DKIN_4	MFP_CFG_IN(GPIO97, AF1)
-#define GPIO98_KP_DKIN_5	MFP_CFG_IN(GPIO98, AF1)
-#define GPIO99_KP_DKIN_6	MFP_CFG_IN(GPIO99, AF1)
-#define GPIO13_KP_KDIN_7	MFP_CFG_IN(GPIO13, AF2)
-#define GPIO100_KP_MKIN_0	MFP_CFG_IN(GPIO100, AF1)
-#define GPIO101_KP_MKIN_1	MFP_CFG_IN(GPIO101, AF1)
-#define GPIO102_KP_MKIN_2	MFP_CFG_IN(GPIO102, AF1)
-#define GPIO34_KP_MKIN_3	MFP_CFG_IN(GPIO34, AF2)
-#define GPIO37_KP_MKIN_3	MFP_CFG_IN(GPIO37, AF3)
-#define GPIO97_KP_MKIN_3	MFP_CFG_IN(GPIO97, AF3)
-#define GPIO98_KP_MKIN_4	MFP_CFG_IN(GPIO98, AF3)
-#define GPIO38_KP_MKIN_4	MFP_CFG_IN(GPIO38, AF2)
-#define GPIO39_KP_MKIN_4	MFP_CFG_IN(GPIO39, AF1)
-#define GPIO16_KP_MKIN_5	MFP_CFG_IN(GPIO16, AF1)
-#define GPIO90_KP_MKIN_5	MFP_CFG_IN(GPIO90, AF1)
-#define GPIO99_KP_MKIN_5	MFP_CFG_IN(GPIO99, AF3)
-#define GPIO17_KP_MKIN_6	MFP_CFG_IN(GPIO17, AF1)
-#define GPIO91_KP_MKIN_6	MFP_CFG_IN(GPIO91, AF1)
-#define GPIO95_KP_MKIN_6	MFP_CFG_IN(GPIO95, AF3)
-#define GPIO13_KP_MKIN_7	MFP_CFG_IN(GPIO13, AF3)
-#define GPIO36_KP_MKIN_7	MFP_CFG_IN(GPIO36, AF3)
-#define GPIO103_KP_MKOUT_0	MFP_CFG_OUT(GPIO103, AF2, DRIVE_HIGH)
-#define GPIO104_KP_MKOUT_1	MFP_CFG_OUT(GPIO104, AF2, DRIVE_HIGH)
-#define GPIO105_KP_MKOUT_2	MFP_CFG_OUT(GPIO105, AF2, DRIVE_HIGH)
-#define GPIO106_KP_MKOUT_3	MFP_CFG_OUT(GPIO106, AF2, DRIVE_HIGH)
-#define GPIO107_KP_MKOUT_4	MFP_CFG_OUT(GPIO107, AF2, DRIVE_HIGH)
-#define GPIO108_KP_MKOUT_5	MFP_CFG_OUT(GPIO108, AF2, DRIVE_HIGH)
-#define GPIO35_KP_MKOUT_6	MFP_CFG_OUT(GPIO35, AF2, DRIVE_HIGH)
-#define GPIO22_KP_MKOUT_7	MFP_CFG_OUT(GPIO22, AF1, DRIVE_HIGH)
-#define GPIO40_KP_MKOUT_6	MFP_CFG_OUT(GPIO40, AF1, DRIVE_HIGH)
-#define GPIO41_KP_MKOUT_7	MFP_CFG_OUT(GPIO41, AF1, DRIVE_HIGH)
-#define GPIO96_KP_MKOUT_6	MFP_CFG_OUT(GPIO96, AF3, DRIVE_HIGH)
-
-/* USB P3 */
-#define GPIO10_USB_P3_5		MFP_CFG_IN(GPIO10, AF3)
-#define GPIO11_USB_P3_1		MFP_CFG_IN(GPIO11, AF3)
-#define GPIO30_USB_P3_2		MFP_CFG_OUT(GPIO30, AF3, DRIVE_LOW)
-#define GPIO31_USB_P3_6		MFP_CFG_OUT(GPIO31, AF3, DRIVE_LOW)
-#define GPIO56_USB_P3_4		MFP_CFG_OUT(GPIO56, AF1, DRIVE_LOW)
-#define GPIO86_USB_P3_5		MFP_CFG_IN(GPIO86, AF3)
-#define GPIO87_USB_P3_1		MFP_CFG_IN(GPIO87, AF3)
-#define GPIO90_USB_P3_5		MFP_CFG_IN(GPIO90, AF2)
-#define GPIO91_USB_P3_1		MFP_CFG_IN(GPIO91, AF2)
-#define GPIO113_USB_P3_3	MFP_CFG_IN(GPIO113, AF3)
-
-/* USB P2 */
-#define GPIO34_USB_P2_2		MFP_CFG_OUT(GPIO34, AF1, DRIVE_LOW)
-#define GPIO35_USB_P2_1		MFP_CFG_IN(GPIO35, AF2)
-#define GPIO36_USB_P2_4		MFP_CFG_OUT(GPIO36, AF1, DRIVE_LOW)
-#define GPIO37_USB_P2_8		MFP_CFG_OUT(GPIO37, AF1, DRIVE_LOW)
-#define GPIO38_USB_P2_3		MFP_CFG_IN(GPIO38, AF3)
-#define GPIO39_USB_P2_6		MFP_CFG_OUT(GPIO39, AF1, DRIVE_LOW)
-#define GPIO40_USB_P2_5		MFP_CFG_IN(GPIO40, AF3)
-#define GPIO41_USB_P2_7		MFP_CFG_IN(GPIO41, AF2)
-#define GPIO53_USB_P2_3		MFP_CFG_IN(GPIO53, AF2)
-
-/* USB Host Port 1/2 */
-#define GPIO88_USBH1_PWR	MFP_CFG_IN(GPIO88, AF1)
-#define GPIO89_USBH1_PEN	MFP_CFG_OUT(GPIO89, AF2, DRIVE_LOW)
-#define GPIO119_USBH2_PWR	MFP_CFG_IN(GPIO119, AF1)
-#define GPIO120_USBH2_PEN	MFP_CFG_OUT(GPIO120, AF2, DRIVE_LOW)
-
-/* QCI - default to Master Mode: CIF_FV/CIF_LV Direction In */
-#define GPIO115_CIF_DD_3	MFP_CFG_IN(GPIO115, AF2)
-#define GPIO116_CIF_DD_2	MFP_CFG_IN(GPIO116, AF1)
-#define GPIO12_CIF_DD_7		MFP_CFG_IN(GPIO12, AF2)
-#define GPIO17_CIF_DD_6		MFP_CFG_IN(GPIO17, AF2)
-#define GPIO23_CIF_MCLK		MFP_CFG_OUT(GPIO23, AF1, DRIVE_LOW)
-#define GPIO24_CIF_FV		MFP_CFG_IN(GPIO24, AF1)
-#define GPIO25_CIF_LV		MFP_CFG_IN(GPIO25, AF1)
-#define GPIO26_CIF_PCLK		MFP_CFG_IN(GPIO26, AF2)
-#define GPIO27_CIF_DD_0		MFP_CFG_IN(GPIO27, AF3)
-#define GPIO42_CIF_MCLK		MFP_CFG_OUT(GPIO42, AF3, DRIVE_LOW)
-#define GPIO43_CIF_FV		MFP_CFG_IN(GPIO43, AF3)
-#define GPIO44_CIF_LV		MFP_CFG_IN(GPIO44, AF3)
-#define GPIO45_CIF_PCLK		MFP_CFG_IN(GPIO45, AF3)
-#define GPIO47_CIF_DD_0		MFP_CFG_IN(GPIO47, AF1)
-#define GPIO48_CIF_DD_5		MFP_CFG_IN(GPIO48, AF1)
-#define GPIO50_CIF_DD_3		MFP_CFG_IN(GPIO50, AF1)
-#define GPIO51_CIF_DD_2		MFP_CFG_IN(GPIO51, AF1)
-#define GPIO52_CIF_DD_4		MFP_CFG_IN(GPIO52, AF1)
-#define GPIO53_CIF_MCLK		MFP_CFG_OUT(GPIO53, AF2, DRIVE_LOW)
-#define GPIO54_CIF_PCLK		MFP_CFG_IN(GPIO54, AF3)
-#define GPIO55_CIF_DD_1		MFP_CFG_IN(GPIO55, AF1)
-#define GPIO81_CIF_DD_0		MFP_CFG_IN(GPIO81, AF2)
-#define GPIO82_CIF_DD_5		MFP_CFG_IN(GPIO82, AF3)
-#define GPIO83_CIF_DD_4		MFP_CFG_IN(GPIO83, AF3)
-#define GPIO84_CIF_FV		MFP_CFG_IN(GPIO84, AF3)
-#define GPIO85_CIF_LV		MFP_CFG_IN(GPIO85, AF3)
-#define GPIO90_CIF_DD_4		MFP_CFG_IN(GPIO90, AF3)
-#define GPIO91_CIF_DD_5		MFP_CFG_IN(GPIO91, AF3)
-#define GPIO93_CIF_DD_6		MFP_CFG_IN(GPIO93, AF2)
-#define GPIO94_CIF_DD_5		MFP_CFG_IN(GPIO94, AF2)
-#define GPIO95_CIF_DD_4		MFP_CFG_IN(GPIO95, AF2)
-#define GPIO98_CIF_DD_0		MFP_CFG_IN(GPIO98, AF2)
-#define GPIO103_CIF_DD_3	MFP_CFG_IN(GPIO103, AF1)
-#define GPIO104_CIF_DD_2	MFP_CFG_IN(GPIO104, AF1)
-#define GPIO105_CIF_DD_1	MFP_CFG_IN(GPIO105, AF1)
-#define GPIO106_CIF_DD_9	MFP_CFG_IN(GPIO106, AF1)
-#define GPIO107_CIF_DD_8	MFP_CFG_IN(GPIO107, AF1)
-#define GPIO108_CIF_DD_7	MFP_CFG_IN(GPIO108, AF1)
-#define GPIO114_CIF_DD_1	MFP_CFG_IN(GPIO114, AF1)
-
-/* Universal Subscriber ID Interface */
-#define GPIO114_UVS0		MFP_CFG_OUT(GPIO114, AF2, DRIVE_LOW)
-#define GPIO115_nUVS1		MFP_CFG_OUT(GPIO115, AF2, DRIVE_LOW)
-#define GPIO116_nUVS2		MFP_CFG_OUT(GPIO116, AF2, DRIVE_LOW)
-#define GPIO14_UCLK		MFP_CFG_OUT(GPIO14, AF3, DRIVE_LOW)
-#define GPIO91_UCLK		MFP_CFG_OUT(GPIO91, AF2, DRIVE_LOW)
-#define GPIO19_nURST		MFP_CFG_OUT(GPIO19, AF3, DRIVE_LOW)
-#define GPIO90_nURST		MFP_CFG_OUT(GPIO90, AF2, DRIVE_LOW)
-#define GPIO116_UDET		MFP_CFG_IN(GPIO116, AF3)
-#define GPIO114_UEN		MFP_CFG_OUT(GPIO114, AF1, DRIVE_LOW)
-#define GPIO115_UEN		MFP_CFG_OUT(GPIO115, AF1, DRIVE_LOW)
-
-/* Mobile Scalable Link (MSL) Interface */
-#define GPIO81_BB_OB_DAT_0	MFP_CFG_OUT(GPIO81, AF2, DRIVE_LOW)
-#define GPIO48_BB_OB_DAT_1	MFP_CFG_OUT(GPIO48, AF1, DRIVE_LOW)
-#define GPIO50_BB_OB_DAT_2	MFP_CFG_OUT(GPIO50, AF1, DRIVE_LOW)
-#define GPIO51_BB_OB_DAT_3	MFP_CFG_OUT(GPIO51, AF1, DRIVE_LOW)
-#define GPIO52_BB_OB_CLK	MFP_CFG_OUT(GPIO52, AF1, DRIVE_LOW)
-#define GPIO53_BB_OB_STB	MFP_CFG_OUT(GPIO53, AF1, DRIVE_LOW)
-#define GPIO54_BB_OB_WAIT	MFP_CFG_IN(GPIO54, AF2)
-#define GPIO82_BB_IB_DAT_0	MFP_CFG_IN(GPIO82, AF2)
-#define GPIO55_BB_IB_DAT_1	MFP_CFG_IN(GPIO55, AF2)
-#define GPIO56_BB_IB_DAT_2	MFP_CFG_IN(GPIO56, AF2)
-#define GPIO57_BB_IB_DAT_3	MFP_CFG_IN(GPIO57, AF2)
-#define GPIO83_BB_IB_CLK	MFP_CFG_IN(GPIO83, AF2)
-#define GPIO84_BB_IB_STB	MFP_CFG_IN(GPIO84, AF2)
-#define GPIO85_BB_IB_WAIT	MFP_CFG_OUT(GPIO85, AF2, DRIVE_LOW)
-
-/* Memory Stick Host Controller */
-#define GPIO92_MSBS		MFP_CFG_OUT(GPIO92, AF2, DRIVE_LOW)
-#define GPIO109_MSSDIO		MFP_CFG_IN(GPIO109, AF2)
-#define GPIO112_nMSINS		MFP_CFG_IN(GPIO112, AF2)
-#define GPIO32_MSSCLK		MFP_CFG_OUT(GPIO32, AF1, DRIVE_LOW)
-
-/* commonly used pin configurations */
-#define GPIOxx_LCD_16BPP	\
-	GPIO58_LCD_LDD_0,	\
-	GPIO59_LCD_LDD_1,	\
-	GPIO60_LCD_LDD_2,	\
-	GPIO61_LCD_LDD_3,	\
-	GPIO62_LCD_LDD_4,	\
-	GPIO63_LCD_LDD_5,	\
-	GPIO64_LCD_LDD_6,	\
-	GPIO65_LCD_LDD_7,	\
-	GPIO66_LCD_LDD_8,	\
-	GPIO67_LCD_LDD_9,	\
-	GPIO68_LCD_LDD_10,	\
-	GPIO69_LCD_LDD_11,	\
-	GPIO70_LCD_LDD_12,	\
-	GPIO71_LCD_LDD_13,	\
-	GPIO72_LCD_LDD_14,	\
-	GPIO73_LCD_LDD_15
-
-#define GPIOxx_LCD_TFT_16BPP	\
-	GPIOxx_LCD_16BPP,	\
-	GPIO74_LCD_FCLK,	\
-	GPIO75_LCD_LCLK,	\
-	GPIO76_LCD_PCLK,	\
-	GPIO77_LCD_BIAS
-
-
-extern int keypad_set_wake(unsigned int on);
-#endif /* __ASM_ARCH_MFP_PXA27X_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h
deleted file mode 100644
index cbf51ae8..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h
+++ /dev/null
@@ -1,142 +0,0 @@
-#ifndef __ASM_ARCH_MFP_PXA2XX_H
-#define __ASM_ARCH_MFP_PXA2XX_H
-
-#include <plat/mfp.h>
-
-/*
- * the following MFP_xxx bit definitions in mfp.h are re-used for pxa2xx:
- *
- *  MFP_PIN(x)
- *  MFP_AFx
- *  MFP_LPM_DRIVE_{LOW, HIGH}
- *  MFP_LPM_EDGE_x
- *
- * other MFP_x bit definitions will be ignored
- *
- * and adds the below two bits specifically for pxa2xx:
- *
- * bit     23 - Input/Output (PXA2xx specific)
- * bit     24 - Wakeup Enable(PXA2xx specific)
- * bit     25 - Keep Output  (PXA2xx specific)
- */
-
-#define MFP_DIR_IN		(0x0 << 23)
-#define MFP_DIR_OUT		(0x1 << 23)
-#define MFP_DIR_MASK		(0x1 << 23)
-#define MFP_DIR(x)		(((x) >> 23) & 0x1)
-
-#define MFP_LPM_CAN_WAKEUP	(0x1 << 24)
-
-/*
- * MFP_LPM_KEEP_OUTPUT must be specified for pins that need to
- * retain their last output level (low or high).
- * Note: MFP_LPM_KEEP_OUTPUT has no effect on pins configured for input.
- */
-#define MFP_LPM_KEEP_OUTPUT	(0x1 << 25)
-
-#define WAKEUP_ON_EDGE_RISE	(MFP_LPM_CAN_WAKEUP | MFP_LPM_EDGE_RISE)
-#define WAKEUP_ON_EDGE_FALL	(MFP_LPM_CAN_WAKEUP | MFP_LPM_EDGE_FALL)
-#define WAKEUP_ON_EDGE_BOTH	(MFP_LPM_CAN_WAKEUP | MFP_LPM_EDGE_BOTH)
-
-/* specifically for enabling wakeup on keypad GPIOs */
-#define WAKEUP_ON_LEVEL_HIGH	(MFP_LPM_CAN_WAKEUP)
-
-#define MFP_CFG_IN(pin, af)		\
-	((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DIR_MASK)) |\
-	 (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_DIR_IN))
-
-/* NOTE:  pins configured as output _must_ provide a low power state,
- * and this state should help to minimize the power dissipation.
- */
-#define MFP_CFG_OUT(pin, af, state)	\
-	((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DIR_MASK | MFP_LPM_STATE_MASK)) |\
-	 (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_DIR_OUT | MFP_LPM_##state))
-
-/* Common configurations for pxa25x and pxa27x
- *
- * Note: pins configured as GPIO are always initialized to input
- * so not to cause any side effect
- */
-#define GPIO0_GPIO	MFP_CFG_IN(GPIO0, AF0)
-#define GPIO1_GPIO	MFP_CFG_IN(GPIO1, AF0)
-#define GPIO9_GPIO	MFP_CFG_IN(GPIO9, AF0)
-#define GPIO10_GPIO	MFP_CFG_IN(GPIO10, AF0)
-#define GPIO11_GPIO	MFP_CFG_IN(GPIO11, AF0)
-#define GPIO12_GPIO	MFP_CFG_IN(GPIO12, AF0)
-#define GPIO13_GPIO	MFP_CFG_IN(GPIO13, AF0)
-#define GPIO14_GPIO	MFP_CFG_IN(GPIO14, AF0)
-#define GPIO15_GPIO	MFP_CFG_IN(GPIO15, AF0)
-#define GPIO16_GPIO	MFP_CFG_IN(GPIO16, AF0)
-#define GPIO17_GPIO	MFP_CFG_IN(GPIO17, AF0)
-#define GPIO18_GPIO	MFP_CFG_IN(GPIO18, AF0)
-#define GPIO19_GPIO	MFP_CFG_IN(GPIO19, AF0)
-#define GPIO20_GPIO	MFP_CFG_IN(GPIO20, AF0)
-#define GPIO21_GPIO	MFP_CFG_IN(GPIO21, AF0)
-#define GPIO22_GPIO	MFP_CFG_IN(GPIO22, AF0)
-#define GPIO23_GPIO	MFP_CFG_IN(GPIO23, AF0)
-#define GPIO24_GPIO	MFP_CFG_IN(GPIO24, AF0)
-#define GPIO25_GPIO	MFP_CFG_IN(GPIO25, AF0)
-#define GPIO26_GPIO	MFP_CFG_IN(GPIO26, AF0)
-#define GPIO27_GPIO	MFP_CFG_IN(GPIO27, AF0)
-#define GPIO28_GPIO	MFP_CFG_IN(GPIO28, AF0)
-#define GPIO29_GPIO	MFP_CFG_IN(GPIO29, AF0)
-#define GPIO30_GPIO	MFP_CFG_IN(GPIO30, AF0)
-#define GPIO31_GPIO	MFP_CFG_IN(GPIO31, AF0)
-#define GPIO32_GPIO	MFP_CFG_IN(GPIO32, AF0)
-#define GPIO33_GPIO	MFP_CFG_IN(GPIO33, AF0)
-#define GPIO34_GPIO	MFP_CFG_IN(GPIO34, AF0)
-#define GPIO35_GPIO	MFP_CFG_IN(GPIO35, AF0)
-#define GPIO36_GPIO	MFP_CFG_IN(GPIO36, AF0)
-#define GPIO37_GPIO	MFP_CFG_IN(GPIO37, AF0)
-#define GPIO38_GPIO	MFP_CFG_IN(GPIO38, AF0)
-#define GPIO39_GPIO	MFP_CFG_IN(GPIO39, AF0)
-#define GPIO40_GPIO	MFP_CFG_IN(GPIO40, AF0)
-#define GPIO41_GPIO	MFP_CFG_IN(GPIO41, AF0)
-#define GPIO42_GPIO	MFP_CFG_IN(GPIO42, AF0)
-#define GPIO43_GPIO	MFP_CFG_IN(GPIO43, AF0)
-#define GPIO44_GPIO	MFP_CFG_IN(GPIO44, AF0)
-#define GPIO45_GPIO	MFP_CFG_IN(GPIO45, AF0)
-#define GPIO46_GPIO	MFP_CFG_IN(GPIO46, AF0)
-#define GPIO47_GPIO	MFP_CFG_IN(GPIO47, AF0)
-#define GPIO48_GPIO	MFP_CFG_IN(GPIO48, AF0)
-#define GPIO49_GPIO	MFP_CFG_IN(GPIO49, AF0)
-#define GPIO50_GPIO	MFP_CFG_IN(GPIO50, AF0)
-#define GPIO51_GPIO	MFP_CFG_IN(GPIO51, AF0)
-#define GPIO52_GPIO	MFP_CFG_IN(GPIO52, AF0)
-#define GPIO53_GPIO	MFP_CFG_IN(GPIO53, AF0)
-#define GPIO54_GPIO	MFP_CFG_IN(GPIO54, AF0)
-#define GPIO55_GPIO	MFP_CFG_IN(GPIO55, AF0)
-#define GPIO56_GPIO	MFP_CFG_IN(GPIO56, AF0)
-#define GPIO57_GPIO	MFP_CFG_IN(GPIO57, AF0)
-#define GPIO58_GPIO	MFP_CFG_IN(GPIO58, AF0)
-#define GPIO59_GPIO	MFP_CFG_IN(GPIO59, AF0)
-#define GPIO60_GPIO	MFP_CFG_IN(GPIO60, AF0)
-#define GPIO61_GPIO	MFP_CFG_IN(GPIO61, AF0)
-#define GPIO62_GPIO	MFP_CFG_IN(GPIO62, AF0)
-#define GPIO63_GPIO	MFP_CFG_IN(GPIO63, AF0)
-#define GPIO64_GPIO	MFP_CFG_IN(GPIO64, AF0)
-#define GPIO65_GPIO	MFP_CFG_IN(GPIO65, AF0)
-#define GPIO66_GPIO	MFP_CFG_IN(GPIO66, AF0)
-#define GPIO67_GPIO	MFP_CFG_IN(GPIO67, AF0)
-#define GPIO68_GPIO	MFP_CFG_IN(GPIO68, AF0)
-#define GPIO69_GPIO	MFP_CFG_IN(GPIO69, AF0)
-#define GPIO70_GPIO	MFP_CFG_IN(GPIO70, AF0)
-#define GPIO71_GPIO	MFP_CFG_IN(GPIO71, AF0)
-#define GPIO72_GPIO	MFP_CFG_IN(GPIO72, AF0)
-#define GPIO73_GPIO	MFP_CFG_IN(GPIO73, AF0)
-#define GPIO74_GPIO	MFP_CFG_IN(GPIO74, AF0)
-#define GPIO75_GPIO	MFP_CFG_IN(GPIO75, AF0)
-#define GPIO76_GPIO	MFP_CFG_IN(GPIO76, AF0)
-#define GPIO77_GPIO	MFP_CFG_IN(GPIO77, AF0)
-#define GPIO78_GPIO	MFP_CFG_IN(GPIO78, AF0)
-#define GPIO79_GPIO	MFP_CFG_IN(GPIO79, AF0)
-#define GPIO80_GPIO	MFP_CFG_IN(GPIO80, AF0)
-#define GPIO81_GPIO	MFP_CFG_IN(GPIO81, AF0)
-#define GPIO82_GPIO	MFP_CFG_IN(GPIO82, AF0)
-#define GPIO83_GPIO	MFP_CFG_IN(GPIO83, AF0)
-#define GPIO84_GPIO	MFP_CFG_IN(GPIO84, AF0)
-
-extern void pxa2xx_mfp_config(unsigned long *mfp_cfgs, int num);
-extern void pxa2xx_mfp_set_lpm(int mfp, unsigned long lpm);
-extern int gpio_set_wake(unsigned int gpio, unsigned int on);
-#endif /* __ASM_ARCH_MFP_PXA2XX_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/mfp-pxa300.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/mfp-pxa300.h
deleted file mode 100644
index 4e128707..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/mfp-pxa300.h
+++ /dev/null
@@ -1,575 +0,0 @@
-/*
- * arch/arm/mach-pxa/include/mach/mfp-pxa300.h
- *
- * PXA300/PXA310 specific MFP configuration definitions
- *
- * Copyright (C) 2007 Marvell International Ltd.
- * 2007-08-21: eric miao <eric.miao@marvell.com>
- *             initial version
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_MFP_PXA300_H
-#define __ASM_ARCH_MFP_PXA300_H
-
-#include <mach/mfp-pxa3xx.h>
-
-/* GPIO */
-#define GPIO46_GPIO		MFP_CFG(GPIO46, AF1)
-#define GPIO49_GPIO		MFP_CFG(GPIO49, AF3)
-#define GPIO50_GPIO		MFP_CFG(GPIO50, AF2)
-#define GPIO51_GPIO		MFP_CFG(GPIO51, AF3)
-#define GPIO52_GPIO		MFP_CFG(GPIO52, AF3)
-#define GPIO56_GPIO		MFP_CFG(GPIO56, AF0)
-#define GPIO58_GPIO		MFP_CFG(GPIO58, AF0)
-#define GPIO59_GPIO		MFP_CFG(GPIO59, AF0)
-#define GPIO60_GPIO		MFP_CFG(GPIO60, AF0)
-#define GPIO61_GPIO		MFP_CFG(GPIO61, AF0)
-#define GPIO62_GPIO		MFP_CFG(GPIO62, AF0)
-
-#ifdef CONFIG_CPU_PXA310
-#define GPIO7_2_GPIO		MFP_CFG(GPIO7_2, AF0)
-#define GPIO8_2_GPIO		MFP_CFG(GPIO8_2, AF0)
-#define GPIO9_2_GPIO		MFP_CFG(GPIO9_2, AF0)
-#define GPIO10_2_GPIO		MFP_CFG(GPIO10_2, AF0)
-#define GPIO11_2_GPIO		MFP_CFG(GPIO11_2, AF0)
-#define GPIO12_2_GPIO		MFP_CFG(GPIO12_2, AF0)
-#endif
-
-/* Chip Select */
-#define GPIO1_nCS2		MFP_CFG(GPIO1,	AF1)
-#define GPIO2_nCS3		MFP_CFG(GPIO2,  AF1)
-
-/* AC97 */
-#define GPIO23_AC97_nACRESET	MFP_CFG(GPIO23, AF1)
-#define GPIO24_AC97_SYSCLK	MFP_CFG(GPIO24, AF1)
-#define GPIO29_AC97_BITCLK	MFP_CFG(GPIO29, AF1)
-#define GPIO25_AC97_SDATA_IN_0	MFP_CFG(GPIO25, AF1)
-#define GPIO26_AC97_SDATA_IN_1	MFP_CFG(GPIO26, AF1)
-#define GPIO17_AC97_SDATA_IN_2	MFP_CFG(GPIO17, AF3)
-#define GPIO21_AC97_SDATA_IN_2	MFP_CFG(GPIO21, AF2)
-#define GPIO18_AC97_SDATA_IN_3	MFP_CFG(GPIO18, AF3)
-#define GPIO22_AC97_SDATA_IN_3	MFP_CFG(GPIO22, AF2)
-#define GPIO27_AC97_SDATA_OUT	MFP_CFG(GPIO27, AF1)
-#define GPIO28_AC97_SYNC	MFP_CFG(GPIO28, AF1)
-
-/* I2C */
-#define GPIO21_I2C_SCL		MFP_CFG_LPM(GPIO21, AF1, PULL_HIGH)
-#define GPIO22_I2C_SDA		MFP_CFG_LPM(GPIO22, AF1, PULL_HIGH)
-
-/* QCI */
-#define GPIO39_CI_DD_0		MFP_CFG_DRV(GPIO39, AF1, DS04X)
-#define GPIO40_CI_DD_1		MFP_CFG_DRV(GPIO40, AF1, DS04X)
-#define GPIO41_CI_DD_2		MFP_CFG_DRV(GPIO41, AF1, DS04X)
-#define GPIO42_CI_DD_3		MFP_CFG_DRV(GPIO42, AF1, DS04X)
-#define GPIO43_CI_DD_4		MFP_CFG_DRV(GPIO43, AF1, DS04X)
-#define GPIO44_CI_DD_5		MFP_CFG_DRV(GPIO44, AF1, DS04X)
-#define GPIO45_CI_DD_6		MFP_CFG_DRV(GPIO45, AF1, DS04X)
-#define GPIO46_CI_DD_7		MFP_CFG_DRV(GPIO46, AF0, DS04X)
-#define GPIO47_CI_DD_8		MFP_CFG_DRV(GPIO47, AF1, DS04X)
-#define GPIO48_CI_DD_9		MFP_CFG_DRV(GPIO48, AF1, DS04X)
-#define GPIO49_CI_MCLK		MFP_CFG_DRV(GPIO49, AF0, DS04X)
-#define GPIO50_CI_PCLK		MFP_CFG_DRV(GPIO50, AF0, DS04X)
-#define GPIO51_CI_HSYNC		MFP_CFG_DRV(GPIO51, AF0, DS04X)
-#define GPIO52_CI_VSYNC		MFP_CFG_DRV(GPIO52, AF0, DS04X)
-
-/* KEYPAD */
-#define GPIO3_KP_DKIN_6		MFP_CFG_LPM(GPIO3,   AF2, FLOAT)
-#define GPIO4_KP_DKIN_7		MFP_CFG_LPM(GPIO4,   AF2, FLOAT)
-#define GPIO16_KP_DKIN_6	MFP_CFG_LPM(GPIO16,  AF6, FLOAT)
-#define GPIO83_KP_DKIN_2	MFP_CFG_LPM(GPIO83,  AF5, FLOAT)
-#define GPIO84_KP_DKIN_1	MFP_CFG_LPM(GPIO84,  AF5, FLOAT)
-#define GPIO85_KP_DKIN_0	MFP_CFG_LPM(GPIO85,  AF3, FLOAT)
-#define GPIO86_KP_DKIN_1	MFP_CFG_LPM(GPIO86,  AF3, FLOAT)
-#define GPIO87_KP_DKIN_2	MFP_CFG_LPM(GPIO87,  AF3, FLOAT)
-#define GPIO88_KP_DKIN_3	MFP_CFG_LPM(GPIO88,  AF3, FLOAT)
-#define GPIO89_KP_DKIN_3	MFP_CFG_LPM(GPIO89,  AF3, FLOAT)
-#define GPIO107_KP_DKIN_0	MFP_CFG_LPM(GPIO107, AF2, FLOAT)
-#define GPIO108_KP_DKIN_1	MFP_CFG_LPM(GPIO108, AF2, FLOAT)
-#define GPIO109_KP_DKIN_2	MFP_CFG_LPM(GPIO109, AF2, FLOAT)
-#define GPIO110_KP_DKIN_3	MFP_CFG_LPM(GPIO110, AF2, FLOAT)
-#define GPIO111_KP_DKIN_4	MFP_CFG_LPM(GPIO111, AF2, FLOAT)
-#define GPIO112_KP_DKIN_5	MFP_CFG_LPM(GPIO112, AF2, FLOAT)
-#define GPIO113_KP_DKIN_6	MFP_CFG_LPM(GPIO113, AF2, FLOAT)
-#define GPIO114_KP_DKIN_7	MFP_CFG_LPM(GPIO114, AF2, FLOAT)
-#define GPIO115_KP_DKIN_0	MFP_CFG_LPM(GPIO115, AF2, FLOAT)
-#define GPIO116_KP_DKIN_1	MFP_CFG_LPM(GPIO116, AF2, FLOAT)
-#define GPIO117_KP_DKIN_2	MFP_CFG_LPM(GPIO117, AF2, FLOAT)
-#define GPIO118_KP_DKIN_3	MFP_CFG_LPM(GPIO118, AF2, FLOAT)
-#define GPIO119_KP_DKIN_4	MFP_CFG_LPM(GPIO119, AF2, FLOAT)
-#define GPIO120_KP_DKIN_5	MFP_CFG_LPM(GPIO120, AF2, FLOAT)
-#define GPIO121_KP_DKIN_6	MFP_CFG_LPM(GPIO121, AF2, FLOAT)
-#define GPIO122_KP_DKIN_5	MFP_CFG_LPM(GPIO122, AF2, FLOAT)
-#define GPIO123_KP_DKIN_4	MFP_CFG_LPM(GPIO123, AF2, FLOAT)
-#define GPIO124_KP_DKIN_3	MFP_CFG_LPM(GPIO124, AF2, FLOAT)
-#define GPIO127_KP_DKIN_0	MFP_CFG_LPM(GPIO127, AF5, FLOAT)
-#define GPIO0_2_KP_DKIN_0	MFP_CFG_LPM(GPIO0_2, AF2, FLOAT)
-#define GPIO1_2_KP_DKIN_1	MFP_CFG_LPM(GPIO1_2, AF2, FLOAT)
-#define GPIO2_2_KP_DKIN_6	MFP_CFG_LPM(GPIO2_2, AF2, FLOAT)
-#define GPIO3_2_KP_DKIN_7	MFP_CFG_LPM(GPIO3_2, AF2, FLOAT)
-#define GPIO4_2_KP_DKIN_1	MFP_CFG_LPM(GPIO4_2, AF2, FLOAT)
-#define GPIO5_2_KP_DKIN_0	MFP_CFG_LPM(GPIO5_2, AF2, FLOAT)
-
-#define GPIO5_KP_MKIN_0		MFP_CFG_LPM(GPIO5,   AF2, FLOAT)
-#define GPIO6_KP_MKIN_1		MFP_CFG_LPM(GPIO6,   AF2, FLOAT)
-#define GPIO9_KP_MKIN_6		MFP_CFG_LPM(GPIO9,   AF3, FLOAT)
-#define GPIO10_KP_MKIN_7	MFP_CFG_LPM(GPIO10,  AF3, FLOAT)
-#define GPIO70_KP_MKIN_6	MFP_CFG_LPM(GPIO70,  AF3, FLOAT)
-#define GPIO71_KP_MKIN_7	MFP_CFG_LPM(GPIO71,  AF3, FLOAT)
-#define GPIO100_KP_MKIN_6	MFP_CFG_LPM(GPIO100, AF7, FLOAT)
-#define GPIO101_KP_MKIN_7	MFP_CFG_LPM(GPIO101, AF7, FLOAT)
-#define GPIO112_KP_MKIN_6	MFP_CFG_LPM(GPIO112, AF4, FLOAT)
-#define GPIO113_KP_MKIN_7	MFP_CFG_LPM(GPIO113, AF4, FLOAT)
-#define GPIO115_KP_MKIN_0	MFP_CFG_LPM(GPIO115, AF1, FLOAT)
-#define GPIO116_KP_MKIN_1	MFP_CFG_LPM(GPIO116, AF1, FLOAT)
-#define GPIO117_KP_MKIN_2	MFP_CFG_LPM(GPIO117, AF1, FLOAT)
-#define GPIO118_KP_MKIN_3	MFP_CFG_LPM(GPIO118, AF1, FLOAT)
-#define GPIO119_KP_MKIN_4	MFP_CFG_LPM(GPIO119, AF1, FLOAT)
-#define GPIO120_KP_MKIN_5	MFP_CFG_LPM(GPIO120, AF1, FLOAT)
-#define GPIO125_KP_MKIN_2	MFP_CFG_LPM(GPIO125, AF2, FLOAT)
-#define GPIO2_2_KP_MKIN_6	MFP_CFG_LPM(GPIO2_2, AF1, FLOAT)
-#define GPIO3_2_KP_MKIN_7	MFP_CFG_LPM(GPIO3_2, AF1, FLOAT)
-
-#define GPIO7_KP_MKOUT_5	MFP_CFG_LPM(GPIO7,   AF1, DRIVE_HIGH)
-#define GPIO11_KP_MKOUT_5	MFP_CFG_LPM(GPIO11,  AF3, DRIVE_HIGH)
-#define GPIO12_KP_MKOUT_6	MFP_CFG_LPM(GPIO12,  AF3, DRIVE_HIGH)
-#define GPIO13_KP_MKOUT_7	MFP_CFG_LPM(GPIO13,  AF3, DRIVE_HIGH)
-#define GPIO19_KP_MKOUT_4	MFP_CFG_LPM(GPIO19,  AF3, DRIVE_HIGH)
-#define GPIO20_KP_MKOUT_5	MFP_CFG_LPM(GPIO20,  AF3, DRIVE_HIGH)
-#define GPIO38_KP_MKOUT_5	MFP_CFG_LPM(GPIO38,  AF5, DRIVE_HIGH)
-#define GPIO53_KP_MKOUT_6	MFP_CFG_LPM(GPIO53,  AF5, DRIVE_HIGH)
-#define GPIO78_KP_MKOUT_7	MFP_CFG_LPM(GPIO78,  AF5, DRIVE_HIGH)
-#define GPIO85_KP_MKOUT_0	MFP_CFG_LPM(GPIO85,  AF2, DRIVE_HIGH)
-#define GPIO86_KP_MKOUT_1	MFP_CFG_LPM(GPIO86,  AF2, DRIVE_HIGH)
-#define GPIO87_KP_MKOUT_2	MFP_CFG_LPM(GPIO87,  AF2, DRIVE_HIGH)
-#define GPIO88_KP_MKOUT_3	MFP_CFG_LPM(GPIO88,  AF2, DRIVE_HIGH)
-#define GPIO104_KP_MKOUT_6	MFP_CFG_LPM(GPIO104, AF5, DRIVE_HIGH)
-#define GPIO105_KP_MKOUT_7	MFP_CFG_LPM(GPIO105, AF5, DRIVE_HIGH)
-#define GPIO121_KP_MKOUT_0	MFP_CFG_LPM(GPIO121, AF1, DRIVE_HIGH)
-#define GPIO122_KP_MKOUT_1	MFP_CFG_LPM(GPIO122, AF1, DRIVE_HIGH)
-#define GPIO123_KP_MKOUT_2	MFP_CFG_LPM(GPIO123, AF1, DRIVE_HIGH)
-#define GPIO124_KP_MKOUT_3	MFP_CFG_LPM(GPIO124, AF1, DRIVE_HIGH)
-#define GPIO125_KP_MKOUT_4	MFP_CFG_LPM(GPIO125, AF1, DRIVE_HIGH)
-#define GPIO126_KP_MKOUT_7	MFP_CFG_LPM(GPIO126, AF4, DRIVE_HIGH)
-#define GPIO5_2_KP_MKOUT_6	MFP_CFG_LPM(GPIO5_2, AF1, DRIVE_HIGH)
-#define GPIO4_2_KP_MKOUT_5	MFP_CFG_LPM(GPIO4_2, AF1, DRIVE_HIGH)
-#define GPIO6_2_KP_MKOUT_7	MFP_CFG_LPM(GPIO6_2, AF1, DRIVE_HIGH)
-
-/* LCD */
-#define GPIO54_LCD_LDD_0	MFP_CFG_DRV(GPIO54, AF1, DS01X)
-#define GPIO55_LCD_LDD_1	MFP_CFG_DRV(GPIO55, AF1, DS01X)
-#define GPIO56_LCD_LDD_2	MFP_CFG_DRV(GPIO56, AF1, DS01X)
-#define GPIO57_LCD_LDD_3	MFP_CFG_DRV(GPIO57, AF1, DS01X)
-#define GPIO58_LCD_LDD_4	MFP_CFG_DRV(GPIO58, AF1, DS01X)
-#define GPIO59_LCD_LDD_5	MFP_CFG_DRV(GPIO59, AF1, DS01X)
-#define GPIO60_LCD_LDD_6	MFP_CFG_DRV(GPIO60, AF1, DS01X)
-#define GPIO61_LCD_LDD_7	MFP_CFG_DRV(GPIO61, AF1, DS01X)
-#define GPIO62_LCD_LDD_8	MFP_CFG_DRV(GPIO62, AF1, DS01X)
-#define GPIO63_LCD_LDD_9	MFP_CFG_DRV(GPIO63, AF1, DS01X)
-#define GPIO64_LCD_LDD_10	MFP_CFG_DRV(GPIO64, AF1, DS01X)
-#define GPIO65_LCD_LDD_11	MFP_CFG_DRV(GPIO65, AF1, DS01X)
-#define GPIO66_LCD_LDD_12	MFP_CFG_DRV(GPIO66, AF1, DS01X)
-#define GPIO67_LCD_LDD_13	MFP_CFG_DRV(GPIO67, AF1, DS01X)
-#define GPIO68_LCD_LDD_14	MFP_CFG_DRV(GPIO68, AF1, DS01X)
-#define GPIO69_LCD_LDD_15	MFP_CFG_DRV(GPIO69, AF1, DS01X)
-#define GPIO70_LCD_LDD_16	MFP_CFG_DRV(GPIO70, AF1, DS01X)
-#define GPIO71_LCD_LDD_17	MFP_CFG_DRV(GPIO71, AF1, DS01X)
-#define GPIO62_LCD_CS_N		MFP_CFG_DRV(GPIO62, AF2, DS01X)
-#define GPIO72_LCD_FCLK		MFP_CFG_DRV(GPIO72, AF1, DS01X)
-#define GPIO73_LCD_LCLK		MFP_CFG_DRV(GPIO73, AF1, DS01X)
-#define GPIO74_LCD_PCLK		MFP_CFG_DRV(GPIO74, AF1, DS02X)
-#define GPIO75_LCD_BIAS		MFP_CFG_DRV(GPIO75, AF1, DS01X)
-#define GPIO76_LCD_VSYNC	MFP_CFG_DRV(GPIO76, AF2, DS01X)
-
-#define GPIO15_LCD_CS_N		MFP_CFG_DRV(GPIO15,  AF2, DS01X)
-#define GPIO127_LCD_CS_N	MFP_CFG_DRV(GPIO127, AF1, DS01X)
-#define GPIO63_LCD_VSYNC	MFP_CFG_DRV(GPIO63,  AF2, DS01X)
-
-/* Mini-LCD */
-#define GPIO72_MLCD_FCLK	MFP_CFG_DRV(GPIO72, AF7, DS08X)
-#define GPIO73_MLCD_LCLK	MFP_CFG_DRV(GPIO73, AF7, DS08X)
-#define GPIO54_MLCD_LDD_0	MFP_CFG_DRV(GPIO54, AF7, DS08X)
-#define GPIO55_MLCD_LDD_1	MFP_CFG_DRV(GPIO55, AF7, DS08X)
-#define GPIO56_MLCD_LDD_2	MFP_CFG_DRV(GPIO56, AF7, DS08X)
-#define GPIO57_MLCD_LDD_3	MFP_CFG_DRV(GPIO57, AF7, DS08X)
-#define GPIO58_MLCD_LDD_4	MFP_CFG_DRV(GPIO58, AF7, DS08X)
-#define GPIO59_MLCD_LDD_5	MFP_CFG_DRV(GPIO59, AF7, DS08X)
-#define GPIO60_MLCD_LDD_6	MFP_CFG_DRV(GPIO60, AF7, DS08X)
-#define GPIO61_MLCD_LDD_7	MFP_CFG_DRV(GPIO61, AF7, DS08X)
-#define GPIO62_MLCD_LDD_8	MFP_CFG_DRV(GPIO62, AF7, DS08X)
-#define GPIO63_MLCD_LDD_9	MFP_CFG_DRV(GPIO63, AF7, DS08X)
-#define GPIO64_MLCD_LDD_10	MFP_CFG_DRV(GPIO64, AF7, DS08X)
-#define GPIO65_MLCD_LDD_11	MFP_CFG_DRV(GPIO65, AF7, DS08X)
-#define GPIO66_MLCD_LDD_12	MFP_CFG_DRV(GPIO66, AF7, DS08X)
-#define GPIO67_MLCD_LDD_13	MFP_CFG_DRV(GPIO67, AF7, DS08X)
-#define GPIO68_MLCD_LDD_14	MFP_CFG_DRV(GPIO68, AF7, DS08X)
-#define GPIO69_MLCD_LDD_15	MFP_CFG_DRV(GPIO69, AF7, DS08X)
-#define GPIO74_MLCD_PCLK	MFP_CFG_DRV(GPIO74, AF7, DS08X)
-#define GPIO75_MLCD_BIAS	MFP_CFG_DRV(GPIO75, AF2, DS08X)
-
-/* MMC1 */
-#define GPIO7_MMC1_CLK		MFP_CFG_LPM(GPIO7,  AF4, DRIVE_HIGH)
-#define GPIO8_MMC1_CMD		MFP_CFG_LPM(GPIO8,  AF4, DRIVE_HIGH)
-#define GPIO14_MMC1_CMD		MFP_CFG_LPM(GPIO14, AF5, DRIVE_HIGH)
-#define GPIO15_MMC1_CMD		MFP_CFG_LPM(GPIO15, AF5, DRIVE_HIGH)
-#define GPIO3_MMC1_DAT0		MFP_CFG_LPM(GPIO3,  AF4, DRIVE_HIGH)
-#define GPIO4_MMC1_DAT1		MFP_CFG_LPM(GPIO4,  AF4, DRIVE_HIGH)
-#define GPIO5_MMC1_DAT2		MFP_CFG_LPM(GPIO5,  AF4, DRIVE_HIGH)
-#define GPIO6_MMC1_DAT3		MFP_CFG_LPM(GPIO6,  AF4, DRIVE_HIGH)
-
-/* MMC2 */
-#define GPIO9_MMC2_DAT0		MFP_CFG_LPM(GPIO9,  AF4, PULL_HIGH)
-#define GPIO10_MMC2_DAT1	MFP_CFG_LPM(GPIO10, AF4, PULL_HIGH)
-#define GPIO11_MMC2_DAT2	MFP_CFG_LPM(GPIO11, AF4, PULL_HIGH)
-#define GPIO12_MMC2_DAT3	MFP_CFG_LPM(GPIO12, AF4, PULL_HIGH)
-#define GPIO13_MMC2_CLK		MFP_CFG_LPM(GPIO13, AF4, PULL_HIGH)
-#define GPIO14_MMC2_CMD		MFP_CFG_LPM(GPIO14, AF4, PULL_HIGH)
-#define GPIO77_MMC2_DAT0	MFP_CFG_LPM(GPIO77, AF4, PULL_HIGH)
-#define GPIO78_MMC2_DAT1	MFP_CFG_LPM(GPIO78, AF4, PULL_HIGH)
-#define GPIO79_MMC2_DAT2	MFP_CFG_LPM(GPIO79, AF4, PULL_HIGH)
-#define GPIO80_MMC2_DAT3	MFP_CFG_LPM(GPIO80, AF4, PULL_HIGH)
-#define GPIO81_MMC2_CLK		MFP_CFG_LPM(GPIO81, AF4, PULL_HIGH)
-#define GPIO82_MMC2_CMD		MFP_CFG_LPM(GPIO82, AF4, PULL_HIGH)
-
-/* SSP1 */
-#define GPIO89_SSP1_EXTCLK	MFP_CFG(GPIO89, AF1)
-#define GPIO90_SSP1_SYSCLK	MFP_CFG(GPIO90, AF1)
-#define GPIO15_SSP1_SCLK	MFP_CFG(GPIO15, AF6)
-#define GPIO16_SSP1_FRM		MFP_CFG(GPIO16, AF2)
-#define GPIO33_SSP1_SCLK	MFP_CFG(GPIO33, AF5)
-#define GPIO34_SSP1_FRM		MFP_CFG(GPIO34, AF5)
-#define GPIO85_SSP1_SCLK	MFP_CFG(GPIO85, AF1)
-#define GPIO86_SSP1_FRM		MFP_CFG(GPIO86, AF1)
-#define GPIO18_SSP1_TXD		MFP_CFG(GPIO18, AF7)
-#define GPIO18_SSP1_RXD		MFP_CFG(GPIO18, AF2)
-#define GPIO20_SSP1_TXD		MFP_CFG(GPIO20, AF2)
-#define GPIO20_SSP1_RXD		MFP_CFG(GPIO20, AF7)
-#define GPIO35_SSP1_TXD		MFP_CFG(GPIO35, AF5)
-#define GPIO35_SSP1_RXD		MFP_CFG(GPIO35, AF4)
-#define GPIO36_SSP1_TXD		MFP_CFG(GPIO36, AF5)
-#define GPIO36_SSP1_RXD		MFP_CFG(GPIO36, AF6)
-#define GPIO87_SSP1_TXD		MFP_CFG(GPIO87, AF1)
-#define GPIO87_SSP1_RXD		MFP_CFG(GPIO87, AF6)
-#define GPIO88_SSP1_TXD		MFP_CFG(GPIO88, AF6)
-#define GPIO88_SSP1_RXD		MFP_CFG(GPIO88, AF1)
-
-/* SSP2 */
-#define GPIO29_SSP2_EXTCLK	MFP_CFG(GPIO29, AF2)
-#define GPIO23_SSP2_SCLK	MFP_CFG(GPIO23, AF2)
-#define GPIO17_SSP2_FRM		MFP_CFG(GPIO17, AF2)
-#define GPIO25_SSP2_SCLK	MFP_CFG(GPIO25, AF2)
-#define GPIO26_SSP2_FRM		MFP_CFG(GPIO26, AF2)
-#define GPIO33_SSP2_SCLK	MFP_CFG(GPIO33, AF6)
-#define GPIO34_SSP2_FRM		MFP_CFG(GPIO34, AF6)
-#define GPIO64_SSP2_SCLK	MFP_CFG(GPIO64, AF2)
-#define GPIO65_SSP2_FRM		MFP_CFG(GPIO65, AF2)
-#define GPIO19_SSP2_TXD		MFP_CFG(GPIO19, AF2)
-#define GPIO19_SSP2_RXD		MFP_CFG(GPIO19, AF7)
-#define GPIO24_SSP2_TXD		MFP_CFG(GPIO24, AF5)
-#define GPIO24_SSP2_RXD		MFP_CFG(GPIO24, AF4)
-#define GPIO27_SSP2_TXD		MFP_CFG(GPIO27, AF2)
-#define GPIO27_SSP2_RXD		MFP_CFG(GPIO27, AF5)
-#define GPIO28_SSP2_TXD		MFP_CFG(GPIO28, AF5)
-#define GPIO28_SSP2_RXD		MFP_CFG(GPIO28, AF2)
-#define GPIO35_SSP2_TXD		MFP_CFG(GPIO35, AF7)
-#define GPIO35_SSP2_RXD		MFP_CFG(GPIO35, AF6)
-#define GPIO66_SSP2_TXD		MFP_CFG(GPIO66, AF4)
-#define GPIO66_SSP2_RXD		MFP_CFG(GPIO66, AF2)
-#define GPIO67_SSP2_TXD		MFP_CFG(GPIO67, AF2)
-#define GPIO67_SSP2_RXD		MFP_CFG(GPIO67, AF4)
-#define GPIO36_SSP2_TXD		MFP_CFG(GPIO36, AF7)
-
-/* SSP3 */
-#define GPIO69_SSP3_FRM		MFP_CFG_X(GPIO69, AF2, DS08X, DRIVE_LOW)
-#define GPIO68_SSP3_SCLK	MFP_CFG_X(GPIO68, AF2, DS08X, FLOAT)
-#define GPIO92_SSP3_FRM		MFP_CFG_X(GPIO92, AF1, DS08X, DRIVE_LOW)
-#define GPIO91_SSP3_SCLK	MFP_CFG_X(GPIO91, AF1, DS08X, FLOAT)
-#define GPIO70_SSP3_TXD		MFP_CFG_X(GPIO70, AF2, DS08X, DRIVE_LOW)
-#define GPIO70_SSP3_RXD		MFP_CFG_X(GPIO70, AF5, DS08X, FLOAT)
-#define GPIO71_SSP3_TXD		MFP_CFG_X(GPIO71, AF5, DS08X, DRIVE_LOW)
-#define GPIO71_SSP3_RXD		MFP_CFG_X(GPIO71, AF2, DS08X, FLOAT)
-#define GPIO93_SSP3_TXD		MFP_CFG_X(GPIO93, AF1, DS08X, DRIVE_LOW)
-#define GPIO93_SSP3_RXD		MFP_CFG_X(GPIO93, AF5, DS08X, FLOAT)
-#define GPIO94_SSP3_TXD		MFP_CFG_X(GPIO94, AF5, DS08X, DRIVE_LOW)
-#define GPIO94_SSP3_RXD		MFP_CFG_X(GPIO94, AF1, DS08X, FLOAT)
-
-/* SSP4 */
-#define GPIO95_SSP4_SCLK	MFP_CFG_LPM(GPIO95, AF1, PULL_HIGH)
-#define GPIO96_SSP4_FRM		MFP_CFG_LPM(GPIO96, AF1, PULL_HIGH)
-#define GPIO97_SSP4_TXD		MFP_CFG_LPM(GPIO97, AF1, PULL_HIGH)
-#define GPIO97_SSP4_RXD		MFP_CFG_LPM(GPIO97, AF5, PULL_HIGH)
-#define GPIO98_SSP4_TXD		MFP_CFG_LPM(GPIO98, AF5, PULL_HIGH)
-#define GPIO98_SSP4_RXD		MFP_CFG_LPM(GPIO98, AF1, PULL_HIGH)
-
-/* UART1 */
-#define GPIO32_UART1_CTS	MFP_CFG_LPM(GPIO32,  AF2, FLOAT)
-#define GPIO37_UART1_CTS	MFP_CFG_LPM(GPIO37,  AF4, FLOAT)
-#define GPIO79_UART1_CTS	MFP_CFG_LPM(GPIO79,  AF1, FLOAT)
-#define GPIO84_UART1_CTS	MFP_CFG_LPM(GPIO84,  AF3, FLOAT)
-#define GPIO101_UART1_CTS	MFP_CFG_LPM(GPIO101, AF1, FLOAT)
-#define GPIO106_UART1_CTS	MFP_CFG_LPM(GPIO106, AF6, FLOAT)
-
-#define GPIO32_UART1_RTS	MFP_CFG_LPM(GPIO32,  AF4, FLOAT)
-#define GPIO37_UART1_RTS	MFP_CFG_LPM(GPIO37,  AF2, FLOAT)
-#define GPIO79_UART1_RTS	MFP_CFG_LPM(GPIO79,  AF3, FLOAT)
-#define GPIO84_UART1_RTS	MFP_CFG_LPM(GPIO84,  AF1, FLOAT)
-#define GPIO101_UART1_RTS	MFP_CFG_LPM(GPIO101, AF6, FLOAT)
-#define GPIO106_UART1_RTS	MFP_CFG_LPM(GPIO106, AF1, FLOAT)
-
-#define GPIO34_UART1_DSR	MFP_CFG_LPM(GPIO34,  AF2, FLOAT)
-#define GPIO36_UART1_DSR	MFP_CFG_LPM(GPIO36,  AF4, FLOAT)
-#define GPIO81_UART1_DSR	MFP_CFG_LPM(GPIO81,  AF1, FLOAT)
-#define GPIO83_UART1_DSR	MFP_CFG_LPM(GPIO83,  AF3, FLOAT)
-#define GPIO103_UART1_DSR	MFP_CFG_LPM(GPIO103, AF1, FLOAT)
-#define GPIO105_UART1_DSR	MFP_CFG_LPM(GPIO105, AF6, FLOAT)
-
-#define GPIO34_UART1_DTR	MFP_CFG_LPM(GPIO34,  AF4, FLOAT)
-#define GPIO36_UART1_DTR	MFP_CFG_LPM(GPIO36,  AF2, FLOAT)
-#define GPIO81_UART1_DTR	MFP_CFG_LPM(GPIO81,  AF3, FLOAT)
-#define GPIO83_UART1_DTR	MFP_CFG_LPM(GPIO83,  AF1, FLOAT)
-#define GPIO103_UART1_DTR	MFP_CFG_LPM(GPIO103, AF6, FLOAT)
-#define GPIO105_UART1_DTR	MFP_CFG_LPM(GPIO105, AF1, FLOAT)
-
-#define GPIO35_UART1_RI		MFP_CFG_LPM(GPIO35,  AF2, FLOAT)
-#define GPIO82_UART1_RI		MFP_CFG_LPM(GPIO82,  AF1, FLOAT)
-#define GPIO104_UART1_RI	MFP_CFG_LPM(GPIO104, AF1, FLOAT)
-
-#define GPIO33_UART1_DCD	MFP_CFG_LPM(GPIO33,  AF2, FLOAT)
-#define GPIO80_UART1_DCD	MFP_CFG_LPM(GPIO80,  AF1, FLOAT)
-#define GPIO102_UART1_DCD	MFP_CFG_LPM(GPIO102, AF1, FLOAT)
-
-#define GPIO30_UART1_RXD	MFP_CFG_LPM(GPIO30,  AF2, FLOAT)
-#define GPIO31_UART1_RXD	MFP_CFG_LPM(GPIO31,  AF4, FLOAT)
-#define GPIO77_UART1_RXD	MFP_CFG_LPM(GPIO77,  AF1, FLOAT)
-#define GPIO78_UART1_RXD	MFP_CFG_LPM(GPIO78,  AF3, FLOAT)
-#define GPIO99_UART1_RXD	MFP_CFG_LPM(GPIO99,  AF1, FLOAT)
-#define GPIO100_UART1_RXD	MFP_CFG_LPM(GPIO100, AF6, FLOAT)
-#define GPIO102_UART1_RXD	MFP_CFG_LPM(GPIO102, AF6, FLOAT)
-#define GPIO104_UART1_RXD	MFP_CFG_LPM(GPIO104, AF4, FLOAT)
-
-#define GPIO30_UART1_TXD	MFP_CFG_LPM(GPIO30,  AF4, FLOAT)
-#define GPIO31_UART1_TXD	MFP_CFG_LPM(GPIO31,  AF2, FLOAT)
-#define GPIO77_UART1_TXD	MFP_CFG_LPM(GPIO77,  AF3, FLOAT)
-#define GPIO78_UART1_TXD	MFP_CFG_LPM(GPIO78,  AF1, FLOAT)
-#define GPIO99_UART1_TXD	MFP_CFG_LPM(GPIO99,  AF6, FLOAT)
-#define GPIO100_UART1_TXD	MFP_CFG_LPM(GPIO100, AF1, FLOAT)
-#define GPIO102_UART1_TXD	MFP_CFG_LPM(GPIO102, AF4, FLOAT)
-
-/* UART2 */
-#define GPIO15_UART2_CTS	MFP_CFG_LPM(GPIO15,  AF3, FLOAT)
-#define GPIO16_UART2_CTS	MFP_CFG_LPM(GPIO16,  AF5, FLOAT)
-#define GPIO111_UART2_CTS	MFP_CFG_LPM(GPIO111, AF3, FLOAT)
-#define GPIO114_UART2_CTS	MFP_CFG_LPM(GPIO114, AF1, FLOAT)
-
-#define GPIO15_UART2_RTS	MFP_CFG_LPM(GPIO15,  AF4, FLOAT)
-#define GPIO16_UART2_RTS	MFP_CFG_LPM(GPIO16,  AF4, FLOAT)
-#define GPIO114_UART2_RTS	MFP_CFG_LPM(GPIO114, AF3, FLOAT)
-#define GPIO111_UART2_RTS	MFP_CFG_LPM(GPIO111, AF1, FLOAT)
-
-#define GPIO18_UART2_RXD	MFP_CFG_LPM(GPIO18,  AF5, FLOAT)
-#define GPIO19_UART2_RXD	MFP_CFG_LPM(GPIO19,  AF4, FLOAT)
-#define GPIO112_UART2_RXD	MFP_CFG_LPM(GPIO112, AF1, FLOAT)
-#define GPIO113_UART2_RXD	MFP_CFG_LPM(GPIO113, AF3, FLOAT)
-
-#define GPIO18_UART2_TXD	MFP_CFG_LPM(GPIO18,  AF4, FLOAT)
-#define GPIO19_UART2_TXD	MFP_CFG_LPM(GPIO19,  AF5, FLOAT)
-#define GPIO112_UART2_TXD	MFP_CFG_LPM(GPIO112, AF3, FLOAT)
-#define GPIO113_UART2_TXD	MFP_CFG_LPM(GPIO113, AF1, FLOAT)
-
-/* UART3 */
-#define GPIO91_UART3_CTS	MFP_CFG_LPM(GPIO91,  AF2, FLOAT)
-#define GPIO92_UART3_CTS	MFP_CFG_LPM(GPIO92,  AF4, FLOAT)
-#define GPIO107_UART3_CTS	MFP_CFG_LPM(GPIO107, AF1, FLOAT)
-#define GPIO108_UART3_CTS	MFP_CFG_LPM(GPIO108, AF3, FLOAT)
-
-#define GPIO91_UART3_RTS	MFP_CFG_LPM(GPIO91,  AF4, FLOAT)
-#define GPIO92_UART3_RTS	MFP_CFG_LPM(GPIO92,  AF2, FLOAT)
-#define GPIO107_UART3_RTS	MFP_CFG_LPM(GPIO107, AF3, FLOAT)
-#define GPIO108_UART3_RTS	MFP_CFG_LPM(GPIO108, AF1, FLOAT)
-
-#define GPIO7_UART3_RXD		MFP_CFG_LPM(GPIO7,   AF2, FLOAT)
-#define GPIO8_UART3_RXD		MFP_CFG_LPM(GPIO8,   AF6, FLOAT)
-#define GPIO93_UART3_RXD	MFP_CFG_LPM(GPIO93,  AF4, FLOAT)
-#define GPIO94_UART3_RXD	MFP_CFG_LPM(GPIO94,  AF2, FLOAT)
-#define GPIO109_UART3_RXD	MFP_CFG_LPM(GPIO109, AF3, FLOAT)
-#define GPIO110_UART3_RXD	MFP_CFG_LPM(GPIO110, AF1, FLOAT)
-
-#define GPIO7_UART3_TXD		MFP_CFG_LPM(GPIO7,   AF6, FLOAT)
-#define GPIO8_UART3_TXD		MFP_CFG_LPM(GPIO8,   AF2, FLOAT)
-#define GPIO93_UART3_TXD	MFP_CFG_LPM(GPIO93,  AF2, FLOAT)
-#define GPIO94_UART3_TXD	MFP_CFG_LPM(GPIO94,  AF4, FLOAT)
-#define GPIO109_UART3_TXD	MFP_CFG_LPM(GPIO109, AF1, FLOAT)
-#define GPIO110_UART3_TXD	MFP_CFG_LPM(GPIO110, AF3, FLOAT)
-
-/* USB Host */
-#define GPIO0_2_USBH_PEN	MFP_CFG(GPIO0_2, AF1)
-#define GPIO1_2_USBH_PWR	MFP_CFG(GPIO1_2, AF1)
-
-/* USB P3 */
-#define GPIO77_USB_P3_1		MFP_CFG(GPIO77,  AF2)
-#define GPIO78_USB_P3_2		MFP_CFG(GPIO78,  AF2)
-#define GPIO79_USB_P3_3		MFP_CFG(GPIO79,  AF2)
-#define GPIO80_USB_P3_4		MFP_CFG(GPIO80,  AF2)
-#define GPIO81_USB_P3_5		MFP_CFG(GPIO81,  AF2)
-#define GPIO82_USB_P3_6		MFP_CFG(GPIO82,  AF2)
-
-/* PWM */
-#define GPIO17_PWM0_OUT		MFP_CFG(GPIO17, AF1)
-#define GPIO18_PWM1_OUT		MFP_CFG(GPIO18, AF1)
-#define GPIO19_PWM2_OUT		MFP_CFG(GPIO19, AF1)
-#define GPIO20_PWM3_OUT		MFP_CFG(GPIO20, AF1)
-
-/* CIR */
-#define GPIO8_CIR_OUT		MFP_CFG(GPIO8, AF5)
-#define GPIO16_CIR_OUT		MFP_CFG(GPIO16, AF3)
-
-#define GPIO20_OW_DQ_IN		MFP_CFG(GPIO20, AF5)
-#define GPIO126_OW_DQ		MFP_CFG(GPIO126, AF2)
-
-#define GPIO0_DF_RDY		MFP_CFG(GPIO0, AF1)
-#define GPIO7_CLK_BYPASS_XSC	MFP_CFG(GPIO7, AF7)
-#define GPIO17_EXT_SYNC_MVT_0	MFP_CFG(GPIO17, AF6)
-#define GPIO18_EXT_SYNC_MVT_1	MFP_CFG(GPIO18, AF6)
-#define GPIO19_OST_CHOUT_MVT_0	MFP_CFG(GPIO19, AF6)
-#define GPIO20_OST_CHOUT_MVT_1	MFP_CFG(GPIO20, AF6)
-#define GPIO49_48M_CLK		MFP_CFG(GPIO49, AF2)
-#define GPIO126_EXT_CLK		MFP_CFG(GPIO126, AF3)
-#define GPIO127_CLK_BYPASS_GB	MFP_CFG(GPIO127, AF7)
-#define GPIO71_EXT_MATCH_MVT	MFP_CFG(GPIO71, AF6)
-
-#define GPIO3_uIO_IN		MFP_CFG(GPIO3, AF1)
-
-#define GPIO4_uSIM_CARD_STATE	MFP_CFG(GPIO4, AF1)
-#define GPIO5_uSIM_uCLK		MFP_CFG(GPIO5, AF1)
-#define GPIO6_uSIM_uRST		MFP_CFG(GPIO6, AF1)
-#define GPIO16_uSIM_UVS_0	MFP_CFG(GPIO16, AF1)
-
-#define GPIO9_SCIO		MFP_CFG(GPIO9, AF1)
-#define GPIO20_RTC_MVT		MFP_CFG(GPIO20, AF4)
-#define GPIO126_RTC_MVT		MFP_CFG(GPIO126, AF1)
-
-/*
- * PXA300 specific MFP configurations
- */
-#ifdef CONFIG_CPU_PXA300
-#define GPIO99_USB_P2_2		MFP_CFG(GPIO99, AF2)
-#define GPIO99_USB_P2_5		MFP_CFG(GPIO99, AF3)
-#define GPIO99_USB_P2_6		MFP_CFG(GPIO99, AF4)
-#define GPIO100_USB_P2_2	MFP_CFG(GPIO100, AF4)
-#define GPIO100_USB_P2_5	MFP_CFG(GPIO100, AF5)
-#define GPIO101_USB_P2_1	MFP_CFG(GPIO101, AF2)
-#define GPIO102_USB_P2_4	MFP_CFG(GPIO102, AF2)
-#define GPIO104_USB_P2_3	MFP_CFG(GPIO104, AF2)
-#define GPIO105_USB_P2_5	MFP_CFG(GPIO105, AF2)
-#define GPIO100_USB_P2_6	MFP_CFG(GPIO100, AF2)
-#define GPIO106_USB_P2_7	MFP_CFG(GPIO106, AF2)
-#define GPIO103_USB_P2_8	MFP_CFG(GPIO103, AF2)
-
-/* U2D UTMI */
-#define GPIO38_UTM_CLK		MFP_CFG(GPIO38,  AF1)
-#define GPIO26_U2D_RXERROR	MFP_CFG(GPIO26,  AF3)
-#define GPIO50_U2D_RXERROR	MFP_CFG(GPIO50,  AF1)
-#define GPIO89_U2D_RXERROR	MFP_CFG(GPIO89,  AF5)
-#define GPIO24_UTM_RXVALID	MFP_CFG(GPIO24,  AF3)
-#define GPIO48_UTM_RXVALID	MFP_CFG(GPIO48,  AF2)
-#define GPIO87_UTM_RXVALID	MFP_CFG(GPIO87,  AF5)
-#define GPIO25_UTM_RXACTIVE	MFP_CFG(GPIO25,  AF3)
-#define GPIO47_UTM_RXACTIVE	MFP_CFG(GPIO47,  AF2)
-#define GPIO49_UTM_RXACTIVE	MFP_CFG(GPIO49,  AF1)
-#define GPIO88_UTM_RXACTIVE	MFP_CFG(GPIO88,  AF5)
-#define GPIO53_UTM_TXREADY	MFP_CFG(GPIO53,  AF1)
-#define GPIO67_UTM_LINESTATE_0	MFP_CFG(GPIO67,  AF3)
-#define GPIO92_UTM_LINESTATE_0	MFP_CFG(GPIO92,  AF3)
-#define GPIO104_UTM_LINESTATE_0	MFP_CFG(GPIO104, AF3)
-#define GPIO109_UTM_LINESTATE_0	MFP_CFG(GPIO109, AF4)
-#define GPIO68_UTM_LINESTATE_1	MFP_CFG(GPIO68,  AF3)
-#define GPIO93_UTM_LINESTATE_1	MFP_CFG(GPIO93,  AF3)
-#define GPIO105_UTM_LINESTATE_1	MFP_CFG(GPIO105, AF3)
-#define GPIO27_U2D_OPMODE_0	MFP_CFG(GPIO27,  AF4)
-#define GPIO51_U2D_OPMODE_0	MFP_CFG(GPIO51,  AF2)
-#define GPIO90_U2D_OPMODE_0	MFP_CFG(GPIO90,  AF7)
-#define GPIO28_U2D_OPMODE_1	MFP_CFG(GPIO28,  AF4)
-#define GPIO52_U2D_OPMODE_1	MFP_CFG(GPIO52,  AF2)
-#define GPIO106_U2D_OPMODE_1	MFP_CFG(GPIO106, AF3)
-#define GPIO110_U2D_OPMODE_1	MFP_CFG(GPIO110, AF5)
-#define GPIO76_U2D_RESET	MFP_CFG(GPIO76,  AF1)
-#define GPIO95_U2D_RESET	MFP_CFG(GPIO95,  AF2)
-#define GPIO100_U2D_RESET	MFP_CFG(GPIO100, AF3)
-#define GPIO66_U2D_SUSPEND	MFP_CFG(GPIO66,  AF3)
-#define GPIO98_U2D_SUSPEND	MFP_CFG(GPIO98,  AF2)
-#define GPIO103_U2D_SUSPEND	MFP_CFG(GPIO103, AF3)
-#define GPIO65_U2D_TERM_SEL	MFP_CFG(GPIO65,  AF5)
-#define GPIO97_U2D_TERM_SEL	MFP_CFG(GPIO97,  AF3)
-#define GPIO102_U2D_TERM_SEL	MFP_CFG(GPIO102, AF5)
-#define GPIO29_U2D_TXVALID	MFP_CFG(GPIO29,  AF3)
-#define GPIO52_U2D_TXVALID	MFP_CFG(GPIO52,  AF4)
-#define GPIO69_U2D_TXVALID	MFP_CFG(GPIO69,  AF3)
-#define GPIO85_U2D_TXVALID	MFP_CFG(GPIO85,  AF7)
-#define GPIO64_U2D_XCVR_SEL	MFP_CFG(GPIO64,  AF5)
-#define GPIO96_U2D_XCVR_SEL	MFP_CFG(GPIO96,  AF3)
-#define GPIO101_U2D_XCVR_SEL	MFP_CFG(GPIO101, AF5)
-#define GPIO30_UTM_PHYDATA_0	MFP_CFG(GPIO30,  AF3)
-#define GPIO31_UTM_PHYDATA_1	MFP_CFG(GPIO31,  AF3)
-#define GPIO32_UTM_PHYDATA_2	MFP_CFG(GPIO32,  AF3)
-#define GPIO33_UTM_PHYDATA_3	MFP_CFG(GPIO33,  AF3)
-#define GPIO34_UTM_PHYDATA_4	MFP_CFG(GPIO34,  AF3)
-#define GPIO35_UTM_PHYDATA_5	MFP_CFG(GPIO35,  AF3)
-#define GPIO36_UTM_PHYDATA_6	MFP_CFG(GPIO36,  AF3)
-#define GPIO37_UTM_PHYDATA_7	MFP_CFG(GPIO37,  AF3)
-#define GPIO39_UTM_PHYDATA_0	MFP_CFG(GPIO39,  AF3)
-#define GPIO40_UTM_PHYDATA_1	MFP_CFG(GPIO40,  AF3)
-#define GPIO41_UTM_PHYDATA_2	MFP_CFG(GPIO41,  AF3)
-#define GPIO42_UTM_PHYDATA_3	MFP_CFG(GPIO42,  AF3)
-#define GPIO43_UTM_PHYDATA_4	MFP_CFG(GPIO43,  AF3)
-#define GPIO44_UTM_PHYDATA_5	MFP_CFG(GPIO44,  AF3)
-#define GPIO45_UTM_PHYDATA_6	MFP_CFG(GPIO45,  AF3)
-#define GPIO46_UTM_PHYDATA_7	MFP_CFG(GPIO46,  AF3)
-#endif /* CONFIG_CPU_PXA300 */
-
-/*
- * PXA310 specific MFP configurations
- */
-#ifdef CONFIG_CPU_PXA310
-/* USB P2 */
-#define GPIO36_USB_P2_1		MFP_CFG(GPIO36, AF1)
-#define GPIO30_USB_P2_2		MFP_CFG(GPIO30, AF1)
-#define GPIO35_USB_P2_3		MFP_CFG(GPIO35, AF1)
-#define GPIO32_USB_P2_4		MFP_CFG(GPIO32, AF1)
-#define GPIO34_USB_P2_5		MFP_CFG(GPIO34, AF1)
-#define GPIO31_USB_P2_6		MFP_CFG(GPIO31, AF1)
-
-/* MMC1 */
-#define GPIO24_MMC1_CMD		MFP_CFG(GPIO24, AF3)
-#define GPIO29_MMC1_DAT0	MFP_CFG(GPIO29, AF3)
-
-/* MMC3 */
-#define GPIO103_MMC3_CLK	MFP_CFG(GPIO103, AF2)
-#define GPIO105_MMC3_CMD	MFP_CFG(GPIO105, AF2)
-#define GPIO11_2_MMC3_CLK	MFP_CFG(GPIO11_2, AF1)
-#define GPIO12_2_MMC3_CMD	MFP_CFG(GPIO12_2, AF1)
-#define GPIO7_2_MMC3_DAT0	MFP_CFG(GPIO7_2, AF1)
-#define GPIO8_2_MMC3_DAT1	MFP_CFG(GPIO8_2, AF1)
-#define GPIO9_2_MMC3_DAT2	MFP_CFG(GPIO9_2, AF1)
-#define GPIO10_2_MMC3_DAT3	MFP_CFG(GPIO10_2, AF1)
-
-/* ULPI */
-#define GPIO38_ULPI_CLK		MFP_CFG(GPIO38, AF1)
-#define GPIO30_ULPI_DATA_OUT_0	MFP_CFG(GPIO30, AF3)
-#define GPIO31_ULPI_DATA_OUT_1	MFP_CFG(GPIO31, AF3)
-#define GPIO32_ULPI_DATA_OUT_2	MFP_CFG(GPIO32, AF3)
-#define GPIO33_ULPI_DATA_OUT_3	MFP_CFG(GPIO33, AF3)
-#define GPIO34_ULPI_DATA_OUT_4	MFP_CFG(GPIO34, AF3)
-#define GPIO35_ULPI_DATA_OUT_5	MFP_CFG(GPIO35, AF3)
-#define GPIO36_ULPI_DATA_OUT_6	MFP_CFG(GPIO36, AF3)
-#define GPIO37_ULPI_DATA_OUT_7	MFP_CFG(GPIO37, AF3)
-#define GPIO33_ULPI_OTG_INTR	MFP_CFG(GPIO33, AF1)
-
-#define ULPI_DIR	MFP_CFG_DRV(ULPI_DIR, AF0, DS01X)
-#define ULPI_NXT	MFP_CFG_DRV(ULPI_NXT, AF0, DS01X)
-#define ULPI_STP	MFP_CFG_DRV(ULPI_STP, AF0, DS01X)
-#endif /* CONFIG_CPU_PXA310 */
-
-#endif /* __ASM_ARCH_MFP_PXA300_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/mfp-pxa320.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/mfp-pxa320.h
deleted file mode 100644
index 3ce4682e..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/mfp-pxa320.h
+++ /dev/null
@@ -1,461 +0,0 @@
-/*
- * arch/arm/mach-pxa/include/mach/mfp-pxa320.h
- *
- * PXA320 specific MFP configuration definitions
- *
- * Copyright (C) 2007 Marvell International Ltd.
- * 2007-08-21: eric miao <eric.miao@marvell.com>
- *             initial version
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_MFP_PXA320_H
-#define __ASM_ARCH_MFP_PXA320_H
-
-#include <mach/mfp-pxa3xx.h>
-
-/* GPIO */
-#define GPIO46_GPIO		MFP_CFG(GPIO46, AF0)
-#define GPIO49_GPIO		MFP_CFG(GPIO49, AF0)
-#define GPIO50_GPIO		MFP_CFG(GPIO50, AF0)
-#define GPIO51_GPIO		MFP_CFG(GPIO51, AF0)
-#define GPIO52_GPIO		MFP_CFG(GPIO52, AF0)
-
-#define GPIO7_2_GPIO		MFP_CFG(GPIO7_2, AF0)
-#define GPIO8_2_GPIO		MFP_CFG(GPIO8_2, AF0)
-#define GPIO9_2_GPIO		MFP_CFG(GPIO9_2, AF0)
-#define GPIO10_2_GPIO		MFP_CFG(GPIO10_2, AF0)
-#define GPIO11_2_GPIO		MFP_CFG(GPIO11_2, AF0)
-#define GPIO12_2_GPIO		MFP_CFG(GPIO12_2, AF0)
-#define GPIO13_2_GPIO		MFP_CFG(GPIO13_2, AF0)
-#define GPIO14_2_GPIO		MFP_CFG(GPIO14_2, AF0)
-#define GPIO15_2_GPIO		MFP_CFG(GPIO15_2, AF0)
-#define GPIO16_2_GPIO		MFP_CFG(GPIO16_2, AF0)
-#define GPIO17_2_GPIO		MFP_CFG(GPIO17_2, AF0)
-
-/* Chip Select */
-#define GPIO3_nCS2		MFP_CFG(GPIO3, AF1)
-#define GPIO4_nCS3		MFP_CFG(GPIO4, AF1)
-
-/* AC97 */
-#define GPIO34_AC97_SYSCLK	MFP_CFG(GPIO34, AF1)
-#define GPIO39_AC97_BITCLK	MFP_CFG(GPIO39, AF1)
-#define GPIO40_AC97_nACRESET	MFP_CFG(GPIO40, AF1)
-#define GPIO35_AC97_SDATA_IN_0	MFP_CFG(GPIO35, AF1)
-#define GPIO36_AC97_SDATA_IN_1	MFP_CFG(GPIO36, AF1)
-#define GPIO32_AC97_SDATA_IN_2	MFP_CFG(GPIO32, AF2)
-#define GPIO33_AC97_SDATA_IN_3	MFP_CFG(GPIO33, AF2)
-#define GPIO11_AC97_SDATA_IN_2	MFP_CFG(GPIO11, AF3)
-#define GPIO12_AC97_SDATA_IN_3	MFP_CFG(GPIO12, AF3)
-#define GPIO37_AC97_SDATA_OUT	MFP_CFG(GPIO37, AF1)
-#define GPIO38_AC97_SYNC	MFP_CFG(GPIO38, AF1)
-
-/* I2C */
-#define GPIO32_I2C_SCL		MFP_CFG_LPM(GPIO32, AF1, PULL_HIGH)
-#define GPIO33_I2C_SDA		MFP_CFG_LPM(GPIO33, AF1, PULL_HIGH)
-
-/* QCI */
-#define GPIO49_CI_DD_0		MFP_CFG_DRV(GPIO49, AF1, DS04X)
-#define GPIO50_CI_DD_1		MFP_CFG_DRV(GPIO50, AF1, DS04X)
-#define GPIO51_CI_DD_2		MFP_CFG_DRV(GPIO51, AF1, DS04X)
-#define GPIO52_CI_DD_3		MFP_CFG_DRV(GPIO52, AF1, DS04X)
-#define GPIO53_CI_DD_4		MFP_CFG_DRV(GPIO53, AF1, DS04X)
-#define GPIO54_CI_DD_5		MFP_CFG_DRV(GPIO54, AF1, DS04X)
-#define GPIO55_CI_DD_6		MFP_CFG_DRV(GPIO55, AF1, DS04X)
-#define GPIO56_CI_DD_7		MFP_CFG_DRV(GPIO56, AF0, DS04X)
-#define GPIO57_CI_DD_8		MFP_CFG_DRV(GPIO57, AF1, DS04X)
-#define GPIO58_CI_DD_9		MFP_CFG_DRV(GPIO58, AF1, DS04X)
-#define GPIO59_CI_MCLK		MFP_CFG_DRV(GPIO59, AF0, DS04X)
-#define GPIO60_CI_PCLK		MFP_CFG_DRV(GPIO60, AF0, DS04X)
-#define GPIO61_CI_HSYNC		MFP_CFG_DRV(GPIO61, AF0, DS04X)
-#define GPIO62_CI_VSYNC		MFP_CFG_DRV(GPIO62, AF0, DS04X)
-
-#define GPIO31_CIR_OUT		MFP_CFG(GPIO31, AF5)
-
-#define GPIO0_2_CLK_EXT		MFP_CFG(GPIO0_2, AF3)
-#define GPIO0_DRQ		MFP_CFG(GPIO0, AF2)
-#define GPIO11_EXT_SYNC0	MFP_CFG(GPIO11, AF5)
-#define GPIO12_EXT_SYNC1	MFP_CFG(GPIO12, AF6)
-#define GPIO0_2_HZ_CLK		MFP_CFG(GPIO0_2, AF1)
-#define GPIO14_HZ_CLK		MFP_CFG(GPIO14, AF4)
-#define GPIO30_ICP_RXD		MFP_CFG(GPIO30, AF1)
-#define GPIO31_ICP_TXD		MFP_CFG(GPIO31, AF1)
-
-#define GPIO83_KP_DKIN_0	MFP_CFG_LPM(GPIO83, AF3, FLOAT)
-#define GPIO84_KP_DKIN_1	MFP_CFG_LPM(GPIO84, AF3, FLOAT)
-#define GPIO85_KP_DKIN_2	MFP_CFG_LPM(GPIO85, AF3, FLOAT)
-#define GPIO86_KP_DKIN_3	MFP_CFG_LPM(GPIO86, AF3, FLOAT)
-
-#define GPIO105_KP_DKIN_0	MFP_CFG_LPM(GPIO105, AF2, FLOAT)
-#define GPIO106_KP_DKIN_1	MFP_CFG_LPM(GPIO106, AF2, FLOAT)
-#define GPIO107_KP_DKIN_2	MFP_CFG_LPM(GPIO107, AF2, FLOAT)
-#define GPIO108_KP_DKIN_3	MFP_CFG_LPM(GPIO108, AF2, FLOAT)
-#define GPIO109_KP_DKIN_4	MFP_CFG_LPM(GPIO109, AF2, FLOAT)
-#define GPIO110_KP_DKIN_5	MFP_CFG_LPM(GPIO110, AF2, FLOAT)
-#define GPIO111_KP_DKIN_6	MFP_CFG_LPM(GPIO111, AF2, FLOAT)
-#define GPIO112_KP_DKIN_7	MFP_CFG_LPM(GPIO112, AF2, FLOAT)
-
-#define GPIO113_KP_DKIN_0	MFP_CFG_LPM(GPIO113, AF2, FLOAT)
-#define GPIO114_KP_DKIN_1	MFP_CFG_LPM(GPIO114, AF2, FLOAT)
-#define GPIO115_KP_DKIN_2	MFP_CFG_LPM(GPIO115, AF2, FLOAT)
-#define GPIO116_KP_DKIN_3	MFP_CFG_LPM(GPIO116, AF2, FLOAT)
-#define GPIO117_KP_DKIN_4	MFP_CFG_LPM(GPIO117, AF2, FLOAT)
-#define GPIO118_KP_DKIN_5	MFP_CFG_LPM(GPIO118, AF2, FLOAT)
-#define GPIO119_KP_DKIN_6	MFP_CFG_LPM(GPIO119, AF2, FLOAT)
-#define GPIO120_KP_DKIN_7	MFP_CFG_LPM(GPIO120, AF2, FLOAT)
-
-#define GPIO127_KP_DKIN_0	MFP_CFG_LPM(GPIO127, AF2, FLOAT)
-#define GPIO126_KP_DKIN_1	MFP_CFG_LPM(GPIO126, AF2, FLOAT)
-
-#define GPIO2_2_KP_DKIN_0	MFP_CFG_LPM(GPIO2_2, AF2, FLOAT)
-#define GPIO3_2_KP_DKIN_1	MFP_CFG_LPM(GPIO3_2, AF2, FLOAT)
-#define GPIO125_KP_DKIN_2	MFP_CFG_LPM(GPIO125, AF2, FLOAT)
-#define GPIO124_KP_DKIN_3	MFP_CFG_LPM(GPIO124, AF2, FLOAT)
-#define GPIO123_KP_DKIN_4	MFP_CFG_LPM(GPIO123, AF2, FLOAT)
-#define GPIO122_KP_DKIN_5	MFP_CFG_LPM(GPIO122, AF2, FLOAT)
-#define GPIO121_KP_DKIN_6	MFP_CFG_LPM(GPIO121, AF2, FLOAT)
-#define GPIO4_2_KP_DKIN_7	MFP_CFG_LPM(GPIO4_2, AF2, FLOAT)
-
-#define GPIO113_KP_MKIN_0	MFP_CFG_LPM(GPIO113, AF1, FLOAT)
-#define GPIO114_KP_MKIN_1	MFP_CFG_LPM(GPIO114, AF1, FLOAT)
-#define GPIO115_KP_MKIN_2	MFP_CFG_LPM(GPIO115, AF1, FLOAT)
-#define GPIO116_KP_MKIN_3	MFP_CFG_LPM(GPIO116, AF1, FLOAT)
-#define GPIO117_KP_MKIN_4	MFP_CFG_LPM(GPIO117, AF1, FLOAT)
-#define GPIO118_KP_MKIN_5	MFP_CFG_LPM(GPIO118, AF1, FLOAT)
-#define GPIO119_KP_MKIN_6	MFP_CFG_LPM(GPIO119, AF1, FLOAT)
-#define GPIO120_KP_MKIN_7	MFP_CFG_LPM(GPIO120, AF1, FLOAT)
-
-#define GPIO83_KP_MKOUT_0	MFP_CFG_LPM(GPIO83, AF2, DRIVE_HIGH)
-#define GPIO84_KP_MKOUT_1	MFP_CFG_LPM(GPIO84, AF2, DRIVE_HIGH)
-#define GPIO85_KP_MKOUT_2	MFP_CFG_LPM(GPIO85, AF2, DRIVE_HIGH)
-#define GPIO86_KP_MKOUT_3	MFP_CFG_LPM(GPIO86, AF2, DRIVE_HIGH)
-#define GPIO13_KP_MKOUT_4	MFP_CFG_LPM(GPIO13, AF3, DRIVE_HIGH)
-#define GPIO14_KP_MKOUT_5	MFP_CFG_LPM(GPIO14, AF3, DRIVE_HIGH)
-
-#define GPIO121_KP_MKOUT_0	MFP_CFG_LPM(GPIO121, AF1, DRIVE_HIGH)
-#define GPIO122_KP_MKOUT_1	MFP_CFG_LPM(GPIO122, AF1, DRIVE_HIGH)
-#define GPIO123_KP_MKOUT_2	MFP_CFG_LPM(GPIO123, AF1, DRIVE_HIGH)
-#define GPIO124_KP_MKOUT_3	MFP_CFG_LPM(GPIO124, AF1, DRIVE_HIGH)
-#define GPIO125_KP_MKOUT_4	MFP_CFG_LPM(GPIO125, AF1, DRIVE_HIGH)
-#define GPIO126_KP_MKOUT_5	MFP_CFG_LPM(GPIO126, AF1, DRIVE_HIGH)
-#define GPIO127_KP_MKOUT_6	MFP_CFG_LPM(GPIO127, AF1, DRIVE_HIGH)
-#define GPIO5_2_KP_MKOUT_7	MFP_CFG_LPM(GPIO5_2, AF1, DRIVE_HIGH)
-
-/* LCD */
-#define GPIO6_2_LCD_LDD_0	MFP_CFG_DRV(GPIO6_2, AF1, DS01X)
-#define GPIO7_2_LCD_LDD_1	MFP_CFG_DRV(GPIO7_2, AF1, DS01X)
-#define GPIO8_2_LCD_LDD_2	MFP_CFG_DRV(GPIO8_2, AF1, DS01X)
-#define GPIO9_2_LCD_LDD_3	MFP_CFG_DRV(GPIO9_2, AF1, DS01X)
-#define GPIO10_2_LCD_LDD_4	MFP_CFG_DRV(GPIO10_2, AF1, DS01X)
-#define GPIO11_2_LCD_LDD_5	MFP_CFG_DRV(GPIO11_2, AF1, DS01X)
-#define GPIO12_2_LCD_LDD_6	MFP_CFG_DRV(GPIO12_2, AF1, DS01X)
-#define GPIO13_2_LCD_LDD_7	MFP_CFG_DRV(GPIO13_2, AF1, DS01X)
-#define GPIO63_LCD_LDD_8	MFP_CFG_DRV(GPIO63, AF1, DS01X)
-#define GPIO64_LCD_LDD_9	MFP_CFG_DRV(GPIO64, AF1, DS01X)
-#define GPIO65_LCD_LDD_10	MFP_CFG_DRV(GPIO65, AF1, DS01X)
-#define GPIO66_LCD_LDD_11	MFP_CFG_DRV(GPIO66, AF1, DS01X)
-#define GPIO67_LCD_LDD_12	MFP_CFG_DRV(GPIO67, AF1, DS01X)
-#define GPIO68_LCD_LDD_13	MFP_CFG_DRV(GPIO68, AF1, DS01X)
-#define GPIO69_LCD_LDD_14	MFP_CFG_DRV(GPIO69, AF1, DS01X)
-#define GPIO70_LCD_LDD_15	MFP_CFG_DRV(GPIO70, AF1, DS01X)
-#define GPIO71_LCD_LDD_16	MFP_CFG_DRV(GPIO71, AF1, DS01X)
-#define GPIO72_LCD_LDD_17	MFP_CFG_DRV(GPIO72, AF1, DS01X)
-#define GPIO73_LCD_CS_N		MFP_CFG_DRV(GPIO73, AF2, DS01X)
-#define GPIO74_LCD_VSYNC	MFP_CFG_DRV(GPIO74, AF2, DS01X)
-#define GPIO14_2_LCD_FCLK	MFP_CFG_DRV(GPIO14_2, AF1, DS01X)
-#define GPIO15_2_LCD_LCLK	MFP_CFG_DRV(GPIO15_2, AF1, DS01X)
-#define GPIO16_2_LCD_PCLK	MFP_CFG_DRV(GPIO16_2, AF1, DS01X)
-#define GPIO17_2_LCD_BIAS	MFP_CFG_DRV(GPIO17_2, AF1, DS01X)
-#define GPIO64_LCD_VSYNC	MFP_CFG_DRV(GPIO64, AF2, DS01X)
-#define GPIO63_LCD_CS_N		MFP_CFG_DRV(GPIO63, AF2, DS01X)
-
-#define GPIO6_2_MLCD_DD_0	MFP_CFG_DRV(GPIO6_2, AF7, DS08X)
-#define GPIO7_2_MLCD_DD_1	MFP_CFG_DRV(GPIO7_2, AF7, DS08X)
-#define GPIO8_2_MLCD_DD_2	MFP_CFG_DRV(GPIO8_2, AF7, DS08X)
-#define GPIO9_2_MLCD_DD_3	MFP_CFG_DRV(GPIO9_2, AF7, DS08X)
-#define GPIO10_2_MLCD_DD_4	MFP_CFG_DRV(GPIO10_2, AF7, DS08X)
-#define GPIO11_2_MLCD_DD_5	MFP_CFG_DRV(GPIO11_2, AF7, DS08X)
-#define GPIO12_2_MLCD_DD_6	MFP_CFG_DRV(GPIO12_2, AF7, DS08X)
-#define GPIO13_2_MLCD_DD_7	MFP_CFG_DRV(GPIO13_2, AF7, DS08X)
-#define GPIO63_MLCD_DD_8	MFP_CFG_DRV(GPIO63, AF7, DS08X)
-#define GPIO64_MLCD_DD_9	MFP_CFG_DRV(GPIO64, AF7, DS08X)
-#define GPIO65_MLCD_DD_10	MFP_CFG_DRV(GPIO65, AF7, DS08X)
-#define GPIO66_MLCD_DD_11	MFP_CFG_DRV(GPIO66, AF7, DS08X)
-#define GPIO67_MLCD_DD_12	MFP_CFG_DRV(GPIO67, AF7, DS08X)
-#define GPIO68_MLCD_DD_13	MFP_CFG_DRV(GPIO68, AF7, DS08X)
-#define GPIO69_MLCD_DD_14	MFP_CFG_DRV(GPIO69, AF7, DS08X)
-#define GPIO70_MLCD_DD_15	MFP_CFG_DRV(GPIO70, AF7, DS08X)
-#define GPIO71_MLCD_DD_16	MFP_CFG_DRV(GPIO71, AF7, DS08X)
-#define GPIO72_MLCD_DD_17	MFP_CFG_DRV(GPIO72, AF7, DS08X)
-#define GPIO73_MLCD_CS		MFP_CFG_DRV(GPIO73, AF7, DS08X)
-#define GPIO74_MLCD_VSYNC	MFP_CFG_DRV(GPIO74, AF7, DS08X)
-#define GPIO14_2_MLCD_FCLK	MFP_CFG_DRV(GPIO14_2, AF7, DS08X)
-#define GPIO15_2_MLCD_LCLK	MFP_CFG_DRV(GPIO15_2, AF7, DS08X)
-#define GPIO16_2_MLCD_PCLK	MFP_CFG_DRV(GPIO16_2, AF7, DS08X)
-#define GPIO17_2_MLCD_BIAS	MFP_CFG_DRV(GPIO17_2, AF7, DS08X)
-
-/* MMC1 */
-#define GPIO9_MMC1_CMD		MFP_CFG_LPM(GPIO9,  AF4, DRIVE_HIGH)
-#define GPIO22_MMC1_CLK		MFP_CFG_LPM(GPIO22, AF4, DRIVE_HIGH)
-#define GPIO23_MMC1_CMD		MFP_CFG_LPM(GPIO23, AF4, DRIVE_HIGH)
-#define GPIO30_MMC1_CLK		MFP_CFG_LPM(GPIO30, AF4, DRIVE_HIGH)
-#define GPIO31_MMC1_CMD		MFP_CFG_LPM(GPIO31, AF4, DRIVE_HIGH)
-#define GPIO5_MMC1_DAT0		MFP_CFG_LPM(GPIO5,  AF4, DRIVE_HIGH)
-#define GPIO6_MMC1_DAT1		MFP_CFG_LPM(GPIO6,  AF4, DRIVE_HIGH)
-#define GPIO7_MMC1_DAT2		MFP_CFG_LPM(GPIO7,  AF4, DRIVE_HIGH)
-#define GPIO8_MMC1_DAT3		MFP_CFG_LPM(GPIO8,  AF4, DRIVE_HIGH)
-#define GPIO18_MMC1_DAT0	MFP_CFG_LPM(GPIO18, AF4, DRIVE_HIGH)
-#define GPIO19_MMC1_DAT1	MFP_CFG_LPM(GPIO19, AF4, DRIVE_HIGH)
-#define GPIO20_MMC1_DAT2	MFP_CFG_LPM(GPIO20, AF4, DRIVE_HIGH)
-#define GPIO21_MMC1_DAT3	MFP_CFG_LPM(GPIO21, AF4, DRIVE_HIGH)
-
-#define GPIO28_MMC2_CLK		MFP_CFG_LPM(GPIO28, AF4, PULL_HIGH)
-#define GPIO29_MMC2_CMD		MFP_CFG_LPM(GPIO29, AF4, PULL_HIGH)
-#define GPIO30_MMC2_CLK		MFP_CFG_LPM(GPIO30, AF3, PULL_HIGH)
-#define GPIO31_MMC2_CMD		MFP_CFG_LPM(GPIO31, AF3, PULL_HIGH)
-#define GPIO79_MMC2_CLK		MFP_CFG_LPM(GPIO79, AF4, PULL_HIGH)
-#define GPIO80_MMC2_CMD		MFP_CFG_LPM(GPIO80, AF4, PULL_HIGH)
-
-#define GPIO5_MMC2_DAT0		MFP_CFG_LPM(GPIO5, AF2, PULL_HIGH)
-#define GPIO6_MMC2_DAT1		MFP_CFG_LPM(GPIO6, AF2, PULL_HIGH)
-#define GPIO7_MMC2_DAT2		MFP_CFG_LPM(GPIO7, AF2, PULL_HIGH)
-#define GPIO8_MMC2_DAT3		MFP_CFG_LPM(GPIO8, AF2, PULL_HIGH)
-#define GPIO24_MMC2_DAT0	MFP_CFG_LPM(GPIO24, AF4, PULL_HIGH)
-#define GPIO75_MMC2_DAT0	MFP_CFG_LPM(GPIO75, AF4, PULL_HIGH)
-#define GPIO25_MMC2_DAT1	MFP_CFG_LPM(GPIO25, AF4, PULL_HIGH)
-#define GPIO76_MMC2_DAT1	MFP_CFG_LPM(GPIO76, AF4, PULL_HIGH)
-#define GPIO26_MMC2_DAT2	MFP_CFG_LPM(GPIO26, AF4, PULL_HIGH)
-#define GPIO77_MMC2_DAT2	MFP_CFG_LPM(GPIO77, AF4, PULL_HIGH)
-#define GPIO27_MMC2_DAT3	MFP_CFG_LPM(GPIO27, AF4, PULL_HIGH)
-#define GPIO78_MMC2_DAT3	MFP_CFG_LPM(GPIO78, AF4, PULL_HIGH)
-
-/* 1-Wire */
-#define GPIO14_ONE_WIRE		MFP_CFG_LPM(GPIO14,  AF5, FLOAT)
-#define GPIO0_2_ONE_WIRE	MFP_CFG_LPM(GPIO0_2, AF2, FLOAT)
-
-/* SSP1 */
-#define GPIO87_SSP1_EXTCLK	MFP_CFG(GPIO87, AF1)
-#define GPIO88_SSP1_SYSCLK	MFP_CFG(GPIO88, AF1)
-#define GPIO83_SSP1_SCLK	MFP_CFG(GPIO83, AF1)
-#define GPIO84_SSP1_SFRM	MFP_CFG(GPIO84, AF1)
-#define GPIO85_SSP1_RXD		MFP_CFG(GPIO85, AF6)
-#define GPIO85_SSP1_TXD		MFP_CFG(GPIO85, AF1)
-#define GPIO86_SSP1_RXD		MFP_CFG(GPIO86, AF1)
-#define GPIO86_SSP1_TXD		MFP_CFG(GPIO86, AF6)
-
-/* SSP2 */
-#define GPIO39_SSP2_EXTCLK	MFP_CFG(GPIO39, AF2)
-#define GPIO40_SSP2_SYSCLK	MFP_CFG(GPIO40, AF2)
-#define GPIO12_SSP2_SCLK	MFP_CFG(GPIO12, AF2)
-#define GPIO35_SSP2_SCLK	MFP_CFG(GPIO35, AF2)
-#define GPIO36_SSP2_SFRM	MFP_CFG(GPIO36, AF2)
-#define GPIO37_SSP2_RXD		MFP_CFG(GPIO37, AF5)
-#define GPIO37_SSP2_TXD		MFP_CFG(GPIO37, AF2)
-#define GPIO38_SSP2_RXD		MFP_CFG(GPIO38, AF2)
-#define GPIO38_SSP2_TXD		MFP_CFG(GPIO38, AF5)
-
-#define GPIO69_SSP3_SCLK	MFP_CFG_X(GPIO69, AF2, DS08X, FLOAT)
-#define GPIO70_SSP3_FRM		MFP_CFG_X(GPIO70, AF2, DS08X, DRIVE_LOW)
-#define GPIO89_SSP3_SCLK	MFP_CFG_X(GPIO89, AF1, DS08X, FLOAT)
-#define GPIO90_SSP3_FRM		MFP_CFG_X(GPIO90, AF1, DS08X, DRIVE_LOW)
-#define GPIO71_SSP3_RXD		MFP_CFG_X(GPIO71, AF5, DS08X, FLOAT)
-#define GPIO71_SSP3_TXD		MFP_CFG_X(GPIO71, AF2, DS08X, DRIVE_LOW)
-#define GPIO72_SSP3_RXD		MFP_CFG_X(GPIO72, AF2, DS08X, FLOAT)
-#define GPIO72_SSP3_TXD		MFP_CFG_X(GPIO72, AF5, DS08X, DRIVE_LOW)
-#define GPIO91_SSP3_RXD		MFP_CFG_X(GPIO91, AF5, DS08X, FLOAT)
-#define GPIO91_SSP3_TXD		MFP_CFG_X(GPIO91, AF1, DS08X, DRIVE_LOW)
-#define GPIO92_SSP3_RXD		MFP_CFG_X(GPIO92, AF1, DS08X, FLOAT)
-#define GPIO92_SSP3_TXD		MFP_CFG_X(GPIO92, AF5, DS08X, DRIVE_LOW)
-
-#define GPIO93_SSP4_SCLK	MFP_CFG_LPM(GPIO93, AF1, PULL_HIGH)
-#define GPIO94_SSP4_FRM		MFP_CFG_LPM(GPIO94, AF1, PULL_HIGH)
-#define GPIO94_SSP4_RXD		MFP_CFG_LPM(GPIO94, AF5, PULL_HIGH)
-#define GPIO95_SSP4_RXD		MFP_CFG_LPM(GPIO95, AF5, PULL_HIGH)
-#define GPIO95_SSP4_TXD		MFP_CFG_LPM(GPIO95, AF1, PULL_HIGH)
-#define GPIO96_SSP4_RXD		MFP_CFG_LPM(GPIO96, AF1, PULL_HIGH)
-#define GPIO96_SSP4_TXD		MFP_CFG_LPM(GPIO96, AF5, PULL_HIGH)
-
-/* UART1 */
-#define GPIO41_UART1_RXD	MFP_CFG_LPM(GPIO41, AF2, FLOAT)
-#define GPIO41_UART1_TXD	MFP_CFG_LPM(GPIO41, AF4, FLOAT)
-#define GPIO42_UART1_RXD	MFP_CFG_LPM(GPIO42, AF4, FLOAT)
-#define GPIO42_UART1_TXD	MFP_CFG_LPM(GPIO42, AF2, FLOAT)
-#define GPIO75_UART1_RXD	MFP_CFG_LPM(GPIO75, AF1, FLOAT)
-#define GPIO76_UART1_RXD	MFP_CFG_LPM(GPIO76, AF3, FLOAT)
-#define GPIO76_UART1_TXD	MFP_CFG_LPM(GPIO76, AF1, FLOAT)
-#define GPIO97_UART1_RXD	MFP_CFG_LPM(GPIO97, AF1, FLOAT)
-#define GPIO97_UART1_TXD	MFP_CFG_LPM(GPIO97, AF6, FLOAT)
-#define GPIO98_UART1_RXD	MFP_CFG_LPM(GPIO98, AF6, FLOAT)
-#define GPIO98_UART1_TXD	MFP_CFG_LPM(GPIO98, AF1, FLOAT)
-#define GPIO43_UART1_CTS	MFP_CFG_LPM(GPIO43, AF2, FLOAT)
-#define GPIO43_UART1_RTS	MFP_CFG_LPM(GPIO43, AF4, FLOAT)
-#define GPIO48_UART1_CTS	MFP_CFG_LPM(GPIO48, AF4, FLOAT)
-#define GPIO48_UART1_RTS	MFP_CFG_LPM(GPIO48, AF2, FLOAT)
-#define GPIO77_UART1_CTS	MFP_CFG_LPM(GPIO77, AF1, FLOAT)
-#define GPIO82_UART1_RTS	MFP_CFG_LPM(GPIO82, AF1, FLOAT)
-#define GPIO82_UART1_CTS	MFP_CFG_LPM(GPIO82, AF3, FLOAT)
-#define GPIO99_UART1_CTS	MFP_CFG_LPM(GPIO99, AF1, FLOAT)
-#define GPIO99_UART1_RTS	MFP_CFG_LPM(GPIO99, AF6, FLOAT)
-#define GPIO104_UART1_CTS	MFP_CFG_LPM(GPIO104, AF6, FLOAT)
-#define GPIO104_UART1_RTS	MFP_CFG_LPM(GPIO104, AF1, FLOAT)
-#define GPIO45_UART1_DTR	MFP_CFG_LPM(GPIO45, AF4, FLOAT)
-#define GPIO45_UART1_DSR	MFP_CFG_LPM(GPIO45, AF2, FLOAT)
-#define GPIO47_UART1_DTR	MFP_CFG_LPM(GPIO47, AF2, FLOAT)
-#define GPIO47_UART1_DSR	MFP_CFG_LPM(GPIO47, AF4, FLOAT)
-#define GPIO79_UART1_DSR	MFP_CFG_LPM(GPIO79, AF1, FLOAT)
-#define GPIO81_UART1_DTR	MFP_CFG_LPM(GPIO81, AF1, FLOAT)
-#define GPIO81_UART1_DSR	MFP_CFG_LPM(GPIO81, AF3, FLOAT)
-#define GPIO101_UART1_DTR	MFP_CFG_LPM(GPIO101, AF6, FLOAT)
-#define GPIO101_UART1_DSR	MFP_CFG_LPM(GPIO101, AF1, FLOAT)
-#define GPIO103_UART1_DTR	MFP_CFG_LPM(GPIO103, AF1, FLOAT)
-#define GPIO103_UART1_DSR	MFP_CFG_LPM(GPIO103, AF6, FLOAT)
-#define GPIO44_UART1_DCD	MFP_CFG_LPM(GPIO44, AF2, FLOAT)
-#define GPIO78_UART1_DCD	MFP_CFG_LPM(GPIO78, AF1, FLOAT)
-#define GPIO100_UART1_DCD	MFP_CFG_LPM(GPIO100, AF1, FLOAT)
-#define GPIO46_UART1_RI		MFP_CFG_LPM(GPIO46, AF2, FLOAT)
-#define GPIO80_UART1_RI		MFP_CFG_LPM(GPIO80, AF1, FLOAT)
-#define GPIO102_UART1_RI	MFP_CFG_LPM(GPIO102, AF1, FLOAT)
-
-/* UART2 */
-#define GPIO109_UART2_CTS	MFP_CFG_LPM(GPIO109, AF3, FLOAT)
-#define GPIO109_UART2_RTS	MFP_CFG_LPM(GPIO109, AF1, FLOAT)
-#define GPIO112_UART2_CTS	MFP_CFG_LPM(GPIO112, AF1, FLOAT)
-#define GPIO112_UART2_RTS	MFP_CFG_LPM(GPIO112, AF3, FLOAT)
-#define GPIO110_UART2_RXD	MFP_CFG_LPM(GPIO110, AF1, FLOAT)
-#define GPIO110_UART2_TXD	MFP_CFG_LPM(GPIO110, AF3, FLOAT)
-#define GPIO111_UART2_RXD	MFP_CFG_LPM(GPIO111, AF3, FLOAT)
-#define GPIO111_UART2_TXD	MFP_CFG_LPM(GPIO111, AF1, FLOAT)
-
-/* UART3 */
-#define GPIO89_UART3_CTS	MFP_CFG_LPM(GPIO89, AF2, FLOAT)
-#define GPIO89_UART3_RTS	MFP_CFG_LPM(GPIO89, AF4, FLOAT)
-#define GPIO90_UART3_CTS	MFP_CFG_LPM(GPIO90, AF4, FLOAT)
-#define GPIO90_UART3_RTS	MFP_CFG_LPM(GPIO90, AF2, FLOAT)
-#define GPIO105_UART3_CTS	MFP_CFG_LPM(GPIO105, AF1, FLOAT)
-#define GPIO105_UART3_RTS	MFP_CFG_LPM(GPIO105, AF3, FLOAT)
-#define GPIO106_UART3_CTS	MFP_CFG_LPM(GPIO106, AF3, FLOAT)
-#define GPIO106_UART3_RTS	MFP_CFG_LPM(GPIO106, AF1, FLOAT)
-#define GPIO30_UART3_RXD	MFP_CFG_LPM(GPIO30, AF2, FLOAT)
-#define GPIO30_UART3_TXD	MFP_CFG_LPM(GPIO30, AF6, FLOAT)
-#define GPIO31_UART3_RXD	MFP_CFG_LPM(GPIO31, AF6, FLOAT)
-#define GPIO31_UART3_TXD	MFP_CFG_LPM(GPIO31, AF2, FLOAT)
-#define GPIO91_UART3_RXD	MFP_CFG_LPM(GPIO91, AF4, FLOAT)
-#define GPIO91_UART3_TXD	MFP_CFG_LPM(GPIO91, AF2, FLOAT)
-#define GPIO92_UART3_RXD	MFP_CFG_LPM(GPIO92, AF2, FLOAT)
-#define GPIO92_UART3_TXD	MFP_CFG_LPM(GPIO92, AF4, FLOAT)
-#define GPIO107_UART3_RXD	MFP_CFG_LPM(GPIO107, AF3, FLOAT)
-#define GPIO107_UART3_TXD	MFP_CFG_LPM(GPIO107, AF1, FLOAT)
-#define GPIO108_UART3_RXD	MFP_CFG_LPM(GPIO108, AF1, FLOAT)
-#define GPIO108_UART3_TXD	MFP_CFG_LPM(GPIO108, AF3, FLOAT)
-
-
-/* USB 2.0 UTMI */
-#define GPIO10_UTM_CLK		MFP_CFG(GPIO10, AF1)
-#define GPIO36_U2D_RXERROR	MFP_CFG(GPIO36, AF3)
-#define GPIO60_U2D_RXERROR	MFP_CFG(GPIO60, AF1)
-#define GPIO87_U2D_RXERROR	MFP_CFG(GPIO87, AF5)
-#define GPIO34_UTM_RXVALID	MFP_CFG(GPIO34, AF3)
-#define GPIO58_UTM_RXVALID	MFP_CFG(GPIO58, AF2)
-#define GPIO85_UTM_RXVALID	MFP_CFG(GPIO85, AF5)
-#define GPIO35_UTM_RXACTIVE	MFP_CFG(GPIO35, AF3)
-#define GPIO59_UTM_RXACTIVE	MFP_CFG(GPIO59, AF1)
-#define GPIO86_UTM_RXACTIVE	MFP_CFG(GPIO86, AF5)
-#define GPIO73_UTM_TXREADY	MFP_CFG(GPIO73, AF1)
-#define GPIO68_UTM_LINESTATE_0	MFP_CFG(GPIO68, AF3)
-#define GPIO90_UTM_LINESTATE_0	MFP_CFG(GPIO90, AF3)
-#define GPIO102_UTM_LINESTATE_0	MFP_CFG(GPIO102, AF3)
-#define GPIO107_UTM_LINESTATE_0	MFP_CFG(GPIO107, AF4)
-#define GPIO69_UTM_LINESTATE_1	MFP_CFG(GPIO69, AF3)
-#define GPIO91_UTM_LINESTATE_1	MFP_CFG(GPIO91, AF3)
-#define GPIO103_UTM_LINESTATE_1	MFP_CFG(GPIO103, AF3)
-
-#define GPIO41_U2D_PHYDATA_0	MFP_CFG(GPIO41, AF3)
-#define GPIO42_U2D_PHYDATA_1	MFP_CFG(GPIO42, AF3)
-#define GPIO43_U2D_PHYDATA_2	MFP_CFG(GPIO43, AF3)
-#define GPIO44_U2D_PHYDATA_3	MFP_CFG(GPIO44, AF3)
-#define GPIO45_U2D_PHYDATA_4	MFP_CFG(GPIO45, AF3)
-#define GPIO46_U2D_PHYDATA_5	MFP_CFG(GPIO46, AF3)
-#define GPIO47_U2D_PHYDATA_6	MFP_CFG(GPIO47, AF3)
-#define GPIO48_U2D_PHYDATA_7	MFP_CFG(GPIO48, AF3)
-
-#define GPIO49_U2D_PHYDATA_0	MFP_CFG(GPIO49, AF3)
-#define GPIO50_U2D_PHYDATA_1	MFP_CFG(GPIO50, AF3)
-#define GPIO51_U2D_PHYDATA_2	MFP_CFG(GPIO51, AF3)
-#define GPIO52_U2D_PHYDATA_3	MFP_CFG(GPIO52, AF3)
-#define GPIO53_U2D_PHYDATA_4	MFP_CFG(GPIO53, AF3)
-#define GPIO54_U2D_PHYDATA_5	MFP_CFG(GPIO54, AF3)
-#define GPIO55_U2D_PHYDATA_6	MFP_CFG(GPIO55, AF3)
-#define GPIO56_U2D_PHYDATA_7	MFP_CFG(GPIO56, AF3)
-
-#define GPIO37_U2D_OPMODE0	MFP_CFG(GPIO37, AF4)
-#define GPIO61_U2D_OPMODE0	MFP_CFG(GPIO61, AF2)
-#define GPIO88_U2D_OPMODE0	MFP_CFG(GPIO88, AF7)
-
-#define GPIO38_U2D_OPMODE1	MFP_CFG(GPIO38, AF4)
-#define GPIO62_U2D_OPMODE1	MFP_CFG(GPIO62, AF2)
-#define GPIO104_U2D_OPMODE1	MFP_CFG(GPIO104, AF4)
-#define GPIO108_U2D_OPMODE1	MFP_CFG(GPIO108, AF5)
-
-#define GPIO74_U2D_RESET	MFP_CFG(GPIO74, AF1)
-#define GPIO93_U2D_RESET	MFP_CFG(GPIO93, AF2)
-#define GPIO98_U2D_RESET	MFP_CFG(GPIO98, AF3)
-
-#define GPIO67_U2D_SUSPEND	MFP_CFG(GPIO67, AF3)
-#define GPIO96_U2D_SUSPEND	MFP_CFG(GPIO96, AF2)
-#define GPIO101_U2D_SUSPEND	MFP_CFG(GPIO101, AF3)
-
-#define GPIO66_U2D_TERM_SEL	MFP_CFG(GPIO66, AF5)
-#define GPIO95_U2D_TERM_SEL	MFP_CFG(GPIO95, AF3)
-#define GPIO97_U2D_TERM_SEL	MFP_CFG(GPIO97, AF7)
-#define GPIO100_U2D_TERM_SEL	MFP_CFG(GPIO100, AF5)
-
-#define GPIO39_U2D_TXVALID	MFP_CFG(GPIO39, AF4)
-#define GPIO70_U2D_TXVALID	MFP_CFG(GPIO70, AF5)
-#define GPIO83_U2D_TXVALID	MFP_CFG(GPIO83, AF7)
-
-#define GPIO65_U2D_XCVR_SEL	MFP_CFG(GPIO65, AF5)
-#define GPIO94_U2D_XCVR_SEL	MFP_CFG(GPIO94, AF3)
-#define GPIO99_U2D_XCVR_SEL	MFP_CFG(GPIO99, AF5)
-
-/* USB Host 1.1 */
-#define GPIO2_2_USBH_PEN	MFP_CFG(GPIO2_2, AF1)
-#define GPIO3_2_USBH_PWR	MFP_CFG(GPIO3_2, AF1)
-
-/* USB P2 */
-#define GPIO97_USB_P2_2		MFP_CFG(GPIO97, AF2)
-#define GPIO97_USB_P2_6		MFP_CFG(GPIO97, AF4)
-#define GPIO98_USB_P2_2		MFP_CFG(GPIO98, AF4)
-#define GPIO98_USB_P2_6		MFP_CFG(GPIO98, AF2)
-#define GPIO99_USB_P2_1		MFP_CFG(GPIO99, AF2)
-#define GPIO100_USB_P2_4	MFP_CFG(GPIO100, AF2)
-#define GPIO101_USB_P2_8	MFP_CFG(GPIO101, AF2)
-#define GPIO102_USB_P2_3	MFP_CFG(GPIO102, AF2)
-#define GPIO103_USB_P2_5	MFP_CFG(GPIO103, AF2)
-#define GPIO104_USB_P2_7	MFP_CFG(GPIO104, AF2)
-
-/* USB P3 */
-#define GPIO75_USB_P3_1		MFP_CFG(GPIO75, AF2)
-#define GPIO76_USB_P3_2		MFP_CFG(GPIO76, AF2)
-#define GPIO77_USB_P3_3		MFP_CFG(GPIO77, AF2)
-#define GPIO78_USB_P3_4		MFP_CFG(GPIO78, AF2)
-#define GPIO79_USB_P3_5		MFP_CFG(GPIO79, AF2)
-#define GPIO80_USB_P3_6		MFP_CFG(GPIO80, AF2)
-
-#define GPIO13_CHOUT0		MFP_CFG(GPIO13, AF6)
-#define GPIO14_CHOUT1		MFP_CFG(GPIO14, AF6)
-
-#define GPIO2_RDY		MFP_CFG(GPIO2, AF1)
-#define GPIO5_NPIOR		MFP_CFG(GPIO5, AF3)
-#define GPIO6_NPIOW		MFP_CFG(GPIO6, AF3)
-#define GPIO7_NPIOS16		MFP_CFG(GPIO7, AF3)
-#define GPIO8_NPWAIT		MFP_CFG(GPIO8, AF3)
-
-#define GPIO11_PWM0_OUT		MFP_CFG(GPIO11, AF1)
-#define GPIO12_PWM1_OUT		MFP_CFG(GPIO12, AF1)
-#define GPIO13_PWM2_OUT		MFP_CFG(GPIO13, AF1)
-#define GPIO14_PWM3_OUT		MFP_CFG(GPIO14, AF1)
-
-#endif /* __ASM_ARCH_MFP_PXA320_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/mfp-pxa3xx.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/mfp-pxa3xx.h
deleted file mode 100644
index d375195d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/mfp-pxa3xx.h
+++ /dev/null
@@ -1,158 +0,0 @@
-#ifndef __ASM_ARCH_MFP_PXA3XX_H
-#define __ASM_ARCH_MFP_PXA3XX_H
-
-#include <plat/mfp.h>
-
-#define MFPR_BASE	(0x40e10000)
-
-/* PXA3xx common MFP configurations - processor specific ones defined
- * in mfp-pxa300.h and mfp-pxa320.h
- */
-#define GPIO0_GPIO		MFP_CFG(GPIO0, AF0)
-#define GPIO1_GPIO		MFP_CFG(GPIO1, AF0)
-#define GPIO2_GPIO		MFP_CFG(GPIO2, AF0)
-#define GPIO3_GPIO		MFP_CFG(GPIO3, AF0)
-#define GPIO4_GPIO		MFP_CFG(GPIO4, AF0)
-#define GPIO5_GPIO		MFP_CFG(GPIO5, AF0)
-#define GPIO6_GPIO		MFP_CFG(GPIO6, AF0)
-#define GPIO7_GPIO		MFP_CFG(GPIO7, AF0)
-#define GPIO8_GPIO		MFP_CFG(GPIO8, AF0)
-#define GPIO9_GPIO		MFP_CFG(GPIO9, AF0)
-#define GPIO10_GPIO		MFP_CFG(GPIO10, AF0)
-#define GPIO11_GPIO		MFP_CFG(GPIO11, AF0)
-#define GPIO12_GPIO		MFP_CFG(GPIO12, AF0)
-#define GPIO13_GPIO		MFP_CFG(GPIO13, AF0)
-#define GPIO14_GPIO		MFP_CFG(GPIO14, AF0)
-#define GPIO15_GPIO		MFP_CFG(GPIO15, AF0)
-#define GPIO16_GPIO		MFP_CFG(GPIO16, AF0)
-#define GPIO17_GPIO		MFP_CFG(GPIO17, AF0)
-#define GPIO18_GPIO		MFP_CFG(GPIO18, AF0)
-#define GPIO19_GPIO		MFP_CFG(GPIO19, AF0)
-#define GPIO20_GPIO		MFP_CFG(GPIO20, AF0)
-#define GPIO21_GPIO		MFP_CFG(GPIO21, AF0)
-#define GPIO22_GPIO		MFP_CFG(GPIO22, AF0)
-#define GPIO23_GPIO		MFP_CFG(GPIO23, AF0)
-#define GPIO24_GPIO		MFP_CFG(GPIO24, AF0)
-#define GPIO25_GPIO		MFP_CFG(GPIO25, AF0)
-#define GPIO26_GPIO		MFP_CFG(GPIO26, AF0)
-#define GPIO27_GPIO		MFP_CFG(GPIO27, AF0)
-#define GPIO28_GPIO		MFP_CFG(GPIO28, AF0)
-#define GPIO29_GPIO		MFP_CFG(GPIO29, AF0)
-#define GPIO30_GPIO		MFP_CFG(GPIO30, AF0)
-#define GPIO31_GPIO		MFP_CFG(GPIO31, AF0)
-#define GPIO32_GPIO		MFP_CFG(GPIO32, AF0)
-#define GPIO33_GPIO		MFP_CFG(GPIO33, AF0)
-#define GPIO34_GPIO		MFP_CFG(GPIO34, AF0)
-#define GPIO35_GPIO		MFP_CFG(GPIO35, AF0)
-#define GPIO36_GPIO		MFP_CFG(GPIO36, AF0)
-#define GPIO37_GPIO		MFP_CFG(GPIO37, AF0)
-#define GPIO38_GPIO		MFP_CFG(GPIO38, AF0)
-#define GPIO39_GPIO		MFP_CFG(GPIO39, AF0)
-#define GPIO40_GPIO		MFP_CFG(GPIO40, AF0)
-#define GPIO41_GPIO		MFP_CFG(GPIO41, AF0)
-#define GPIO42_GPIO		MFP_CFG(GPIO42, AF0)
-#define GPIO43_GPIO		MFP_CFG(GPIO43, AF0)
-#define GPIO44_GPIO		MFP_CFG(GPIO44, AF0)
-#define GPIO45_GPIO		MFP_CFG(GPIO45, AF0)
-
-#define GPIO47_GPIO		MFP_CFG(GPIO47, AF0)
-#define GPIO48_GPIO		MFP_CFG(GPIO48, AF0)
-
-#define GPIO53_GPIO		MFP_CFG(GPIO53, AF0)
-#define GPIO54_GPIO		MFP_CFG(GPIO54, AF0)
-#define GPIO55_GPIO		MFP_CFG(GPIO55, AF0)
-
-#define GPIO57_GPIO		MFP_CFG(GPIO57, AF0)
-
-#define GPIO63_GPIO		MFP_CFG(GPIO63, AF0)
-#define GPIO64_GPIO		MFP_CFG(GPIO64, AF0)
-#define GPIO65_GPIO		MFP_CFG(GPIO65, AF0)
-#define GPIO66_GPIO		MFP_CFG(GPIO66, AF0)
-#define GPIO67_GPIO		MFP_CFG(GPIO67, AF0)
-#define GPIO68_GPIO		MFP_CFG(GPIO68, AF0)
-#define GPIO69_GPIO		MFP_CFG(GPIO69, AF0)
-#define GPIO70_GPIO		MFP_CFG(GPIO70, AF0)
-#define GPIO71_GPIO		MFP_CFG(GPIO71, AF0)
-#define GPIO72_GPIO		MFP_CFG(GPIO72, AF0)
-#define GPIO73_GPIO		MFP_CFG(GPIO73, AF0)
-#define GPIO74_GPIO		MFP_CFG(GPIO74, AF0)
-#define GPIO75_GPIO		MFP_CFG(GPIO75, AF0)
-#define GPIO76_GPIO		MFP_CFG(GPIO76, AF0)
-#define GPIO77_GPIO		MFP_CFG(GPIO77, AF0)
-#define GPIO78_GPIO		MFP_CFG(GPIO78, AF0)
-#define GPIO79_GPIO		MFP_CFG(GPIO79, AF0)
-#define GPIO80_GPIO		MFP_CFG(GPIO80, AF0)
-#define GPIO81_GPIO		MFP_CFG(GPIO81, AF0)
-#define GPIO82_GPIO		MFP_CFG(GPIO82, AF0)
-#define GPIO83_GPIO		MFP_CFG(GPIO83, AF0)
-#define GPIO84_GPIO		MFP_CFG(GPIO84, AF0)
-#define GPIO85_GPIO		MFP_CFG(GPIO85, AF0)
-#define GPIO86_GPIO		MFP_CFG(GPIO86, AF0)
-#define GPIO87_GPIO		MFP_CFG(GPIO87, AF0)
-#define GPIO88_GPIO		MFP_CFG(GPIO88, AF0)
-#define GPIO89_GPIO		MFP_CFG(GPIO89, AF0)
-#define GPIO90_GPIO		MFP_CFG(GPIO90, AF0)
-#define GPIO91_GPIO		MFP_CFG(GPIO91, AF0)
-#define GPIO92_GPIO		MFP_CFG(GPIO92, AF0)
-#define GPIO93_GPIO		MFP_CFG(GPIO93, AF0)
-#define GPIO94_GPIO		MFP_CFG(GPIO94, AF0)
-#define GPIO95_GPIO		MFP_CFG(GPIO95, AF0)
-#define GPIO96_GPIO		MFP_CFG(GPIO96, AF0)
-#define GPIO97_GPIO		MFP_CFG(GPIO97, AF0)
-#define GPIO98_GPIO		MFP_CFG(GPIO98, AF0)
-#define GPIO99_GPIO		MFP_CFG(GPIO99, AF0)
-#define GPIO100_GPIO		MFP_CFG(GPIO100, AF0)
-#define GPIO101_GPIO		MFP_CFG(GPIO101, AF0)
-#define GPIO102_GPIO		MFP_CFG(GPIO102, AF0)
-#define GPIO103_GPIO		MFP_CFG(GPIO103, AF0)
-#define GPIO104_GPIO		MFP_CFG(GPIO104, AF0)
-#define GPIO105_GPIO		MFP_CFG(GPIO105, AF0)
-#define GPIO106_GPIO		MFP_CFG(GPIO106, AF0)
-#define GPIO107_GPIO		MFP_CFG(GPIO107, AF0)
-#define GPIO108_GPIO		MFP_CFG(GPIO108, AF0)
-#define GPIO109_GPIO		MFP_CFG(GPIO109, AF0)
-#define GPIO110_GPIO		MFP_CFG(GPIO110, AF0)
-#define GPIO111_GPIO		MFP_CFG(GPIO111, AF0)
-#define GPIO112_GPIO		MFP_CFG(GPIO112, AF0)
-#define GPIO113_GPIO		MFP_CFG(GPIO113, AF0)
-#define GPIO114_GPIO		MFP_CFG(GPIO114, AF0)
-#define GPIO115_GPIO		MFP_CFG(GPIO115, AF0)
-#define GPIO116_GPIO		MFP_CFG(GPIO116, AF0)
-#define GPIO117_GPIO		MFP_CFG(GPIO117, AF0)
-#define GPIO118_GPIO		MFP_CFG(GPIO118, AF0)
-#define GPIO119_GPIO		MFP_CFG(GPIO119, AF0)
-#define GPIO120_GPIO		MFP_CFG(GPIO120, AF0)
-#define GPIO121_GPIO		MFP_CFG(GPIO121, AF0)
-#define GPIO122_GPIO		MFP_CFG(GPIO122, AF0)
-#define GPIO123_GPIO		MFP_CFG(GPIO123, AF0)
-#define GPIO124_GPIO		MFP_CFG(GPIO124, AF0)
-#define GPIO125_GPIO		MFP_CFG(GPIO125, AF0)
-#define GPIO126_GPIO		MFP_CFG(GPIO126, AF0)
-#define GPIO127_GPIO		MFP_CFG(GPIO127, AF0)
-
-#define GPIO0_2_GPIO		MFP_CFG(GPIO0_2, AF0)
-#define GPIO1_2_GPIO		MFP_CFG(GPIO1_2, AF0)
-#define GPIO2_2_GPIO		MFP_CFG(GPIO2_2, AF0)
-#define GPIO3_2_GPIO		MFP_CFG(GPIO3_2, AF0)
-#define GPIO4_2_GPIO		MFP_CFG(GPIO4_2, AF0)
-#define GPIO5_2_GPIO		MFP_CFG(GPIO5_2, AF0)
-#define GPIO6_2_GPIO		MFP_CFG(GPIO6_2, AF0)
-
-/* NOTE: usage of these two functions is not recommended,
- * use pxa3xx_mfp_config() instead.
- */
-static inline unsigned long pxa3xx_mfp_read(int mfp)
-{
-	return mfp_read(mfp);
-}
-
-static inline void pxa3xx_mfp_write(int mfp, unsigned long val)
-{
-	mfp_write(mfp, val);
-}
-
-static inline void pxa3xx_mfp_config(unsigned long *mfp_cfg, int num)
-{
-	mfp_config(mfp_cfg, num);
-}
-#endif /* __ASM_ARCH_MFP_PXA3XX_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/mfp-pxa930.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/mfp-pxa930.h
deleted file mode 100644
index 04f7c970..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/mfp-pxa930.h
+++ /dev/null
@@ -1,498 +0,0 @@
-/*
- * arch/arm/mach-pxa/include/mach/mfp-pxa930.h
- *
- * PXA930 specific MFP configuration definitions
- *
- * Copyright (C) 2007-2008 Marvell International Ltd.
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_MFP_PXA9xx_H
-#define __ASM_ARCH_MFP_PXA9xx_H
-
-#include <mach/mfp-pxa3xx.h>
-
-/* GPIO */
-#define GPIO46_GPIO		MFP_CFG(GPIO46, AF0)
-#define GPIO49_GPIO		MFP_CFG(GPIO49, AF0)
-#define GPIO50_GPIO		MFP_CFG(GPIO50, AF0)
-#define GPIO51_GPIO		MFP_CFG(GPIO51, AF0)
-#define GPIO52_GPIO		MFP_CFG(GPIO52, AF0)
-#define GPIO56_GPIO		MFP_CFG(GPIO56, AF0)
-#define GPIO58_GPIO		MFP_CFG(GPIO58, AF0)
-#define GPIO59_GPIO		MFP_CFG(GPIO59, AF0)
-#define GPIO60_GPIO		MFP_CFG(GPIO60, AF0)
-#define GPIO61_GPIO		MFP_CFG(GPIO61, AF0)
-#define GPIO62_GPIO		MFP_CFG(GPIO62, AF0)
-
-#define GSIM_UCLK_GPIO_79	MFP_CFG(GSIM_UCLK, AF0)
-#define GSIM_UIO_GPIO_80	MFP_CFG(GSIM_UIO, AF0)
-#define GSIM_nURST_GPIO_81	MFP_CFG(GSIM_nURST, AF0)
-#define GSIM_UDET_GPIO_82	MFP_CFG(GSIM_UDET, AF0)
-
-#define DF_IO15_GPIO_28		MFP_CFG(DF_IO15, AF0)
-#define DF_IO14_GPIO_29		MFP_CFG(DF_IO14, AF0)
-#define DF_IO13_GPIO_30		MFP_CFG(DF_IO13, AF0)
-#define DF_IO12_GPIO_31		MFP_CFG(DF_IO12, AF0)
-#define DF_IO11_GPIO_32		MFP_CFG(DF_IO11, AF0)
-#define DF_IO10_GPIO_33		MFP_CFG(DF_IO10, AF0)
-#define DF_IO9_GPIO_34		MFP_CFG(DF_IO9, AF0)
-#define DF_IO8_GPIO_35		MFP_CFG(DF_IO8, AF0)
-#define DF_IO7_GPIO_36		MFP_CFG(DF_IO7, AF0)
-#define DF_IO6_GPIO_37		MFP_CFG(DF_IO6, AF0)
-#define DF_IO5_GPIO_38		MFP_CFG(DF_IO5, AF0)
-#define DF_IO4_GPIO_39		MFP_CFG(DF_IO4, AF0)
-#define DF_IO3_GPIO_40		MFP_CFG(DF_IO3, AF0)
-#define DF_IO2_GPIO_41		MFP_CFG(DF_IO2, AF0)
-#define DF_IO1_GPIO_42		MFP_CFG(DF_IO1, AF0)
-#define DF_IO0_GPIO_43		MFP_CFG(DF_IO0, AF0)
-#define DF_nCS0_GPIO_44		MFP_CFG(DF_nCS0, AF0)
-#define DF_nCS1_GPIO_45		MFP_CFG(DF_nCS1, AF0)
-#define DF_nWE_GPIO_46		MFP_CFG(DF_nWE, AF0)
-#define DF_nRE_nOE_GPIO_47	MFP_CFG(DF_nRE_nOE, AF0)
-#define DF_CLE_nOE_GPIO_48	MFP_CFG(DF_CLE_nOE, AF0)
-#define DF_nADV1_ALE_GPIO_49	MFP_CFG(DF_nADV1_ALE, AF0)
-#define DF_nADV2_ALE_GPIO_50	MFP_CFG(DF_nADV2_ALE, AF0)
-#define DF_INT_RnB_GPIO_51	MFP_CFG(DF_INT_RnB, AF0)
-#define DF_SCLK_E_GPIO_52	MFP_CFG(DF_SCLK_E, AF0)
-
-#define DF_ADDR0_GPIO_53	MFP_CFG(DF_ADDR0, AF0)
-#define DF_ADDR1_GPIO_54	MFP_CFG(DF_ADDR1, AF0)
-#define DF_ADDR2_GPIO_55	MFP_CFG(DF_ADDR2, AF0)
-#define DF_ADDR3_GPIO_56	MFP_CFG(DF_ADDR3, AF0)
-#define nXCVREN_GPIO_57		MFP_CFG(nXCVREN, AF0)
-#define nLUA_GPIO_58		MFP_CFG(nLUA, AF0)
-#define nLLA_GPIO_59		MFP_CFG(nLLA, AF0)
-#define nBE0_GPIO_60		MFP_CFG(nBE0, AF0)
-#define nBE1_GPIO_61		MFP_CFG(nBE1, AF0)
-#define RDY_GPIO_62		MFP_CFG(RDY, AF0)
-#define PMIC_INT_GPIO83		MFP_CFG_LPM(PMIC_INT, AF0, PULL_HIGH)
-
-/* Chip Select */
-#define DF_nCS0_nCS2		MFP_CFG_LPM(DF_nCS0, AF3, PULL_HIGH)
-#define DF_nCS1_nCS3		MFP_CFG_LPM(DF_nCS1, AF3, PULL_HIGH)
-
-/* AC97 */
-#define GPIO83_BAC97_SYSCLK	MFP_CFG(GPIO83, AF3)
-#define GPIO84_BAC97_SDATA_IN0	MFP_CFG(GPIO84, AF3)
-#define GPIO85_BAC97_BITCLK	MFP_CFG(GPIO85, AF3)
-#define GPIO86_BAC97_nRESET	MFP_CFG(GPIO86, AF3)
-#define GPIO87_BAC97_SYNC	MFP_CFG(GPIO87, AF3)
-#define GPIO88_BAC97_SDATA_OUT	MFP_CFG(GPIO88, AF3)
-
-/* I2C */
-#define GPIO39_CI2C_SCL		MFP_CFG_LPM(GPIO39, AF3, PULL_HIGH)
-#define GPIO40_CI2C_SDA		MFP_CFG_LPM(GPIO40, AF3, PULL_HIGH)
-
-#define GPIO51_CI2C_SCL		MFP_CFG_LPM(GPIO51, AF3, PULL_HIGH)
-#define GPIO52_CI2C_SDA		MFP_CFG_LPM(GPIO52, AF3, PULL_HIGH)
-
-#define GPIO63_CI2C_SCL		MFP_CFG_LPM(GPIO63, AF4, PULL_HIGH)
-#define GPIO64_CI2C_SDA		MFP_CFG_LPM(GPIO64, AF4, PULL_HIGH)
-
-#define GPIO73_CI2C_SCL		MFP_CFG_LPM(GPIO73, AF1, PULL_HIGH)
-#define GPIO74_CI2C_SDA		MFP_CFG_LPM(GPIO74, AF1, PULL_HIGH)
-
-#define GPIO77_CI2C_SCL		MFP_CFG_LPM(GPIO77, AF2, PULL_HIGH)
-#define GPIO78_CI2C_SDA		MFP_CFG_LPM(GPIO78, AF2, PULL_HIGH)
-
-#define GPIO89_CI2C_SCL		MFP_CFG_LPM(GPIO89, AF1, PULL_HIGH)
-#define GPIO90_CI2C_SDA		MFP_CFG_LPM(GPIO90, AF1, PULL_HIGH)
-
-#define GPIO95_CI2C_SCL		MFP_CFG_LPM(GPIO95, AF1, PULL_HIGH)
-#define GPIO96_CI2C_SDA		MFP_CFG_LPM(GPIO96, AF1, PULL_HIGH)
-
-#define GPIO97_CI2C_SCL		MFP_CFG_LPM(GPIO97, AF3, PULL_HIGH)
-#define GPIO98_CI2C_SDA		MFP_CFG_LPM(GPIO98, AF3, PULL_HIGH)
-
-/* QCI */
-#define GPIO63_CI_DD_9		MFP_CFG_LPM(GPIO63, AF1, PULL_LOW)
-#define GPIO64_CI_DD_8		MFP_CFG_LPM(GPIO64, AF1, PULL_LOW)
-#define GPIO65_CI_DD_7		MFP_CFG_LPM(GPIO65, AF1, PULL_LOW)
-#define GPIO66_CI_DD_6		MFP_CFG_LPM(GPIO66, AF1, PULL_LOW)
-#define GPIO67_CI_DD_5		MFP_CFG_LPM(GPIO67, AF1, PULL_LOW)
-#define GPIO68_CI_DD_4		MFP_CFG_LPM(GPIO68, AF1, PULL_LOW)
-#define GPIO69_CI_DD_3		MFP_CFG_LPM(GPIO69, AF1, PULL_LOW)
-#define GPIO70_CI_DD_2		MFP_CFG_LPM(GPIO70, AF1, PULL_LOW)
-#define GPIO71_CI_DD_1		MFP_CFG_LPM(GPIO71, AF1, PULL_LOW)
-#define GPIO72_CI_DD_0		MFP_CFG_LPM(GPIO72, AF1, PULL_LOW)
-#define GPIO73_CI_HSYNC		MFP_CFG_LPM(GPIO73, AF1, PULL_LOW)
-#define GPIO74_CI_VSYNC		MFP_CFG_LPM(GPIO74, AF1, PULL_LOW)
-#define GPIO75_CI_MCLK		MFP_CFG_LPM(GPIO75, AF1, PULL_LOW)
-#define GPIO76_CI_PCLK		MFP_CFG_LPM(GPIO76, AF1, PULL_LOW)
-
-/* KEYPAD */
-#define GPIO4_KP_DKIN_4		MFP_CFG_LPM(GPIO4, AF3, FLOAT)
-#define GPIO5_KP_DKIN_5		MFP_CFG_LPM(GPIO5, AF3, FLOAT)
-#define GPIO6_KP_DKIN_6		MFP_CFG_LPM(GPIO6, AF3, FLOAT)
-#define GPIO7_KP_DKIN_7		MFP_CFG_LPM(GPIO7, AF3, FLOAT)
-#define GPIO8_KP_DKIN_4		MFP_CFG_LPM(GPIO8, AF3, FLOAT)
-#define GPIO9_KP_DKIN_5		MFP_CFG_LPM(GPIO9, AF3, FLOAT)
-#define GPIO10_KP_DKIN_6	MFP_CFG_LPM(GPIO10, AF3, FLOAT)
-#define GPIO11_KP_DKIN_7	MFP_CFG_LPM(GPIO11, AF3, FLOAT)
-
-#define GPIO12_KP_DKIN_0	MFP_CFG_LPM(GPIO12, AF2, FLOAT)
-#define GPIO13_KP_DKIN_1	MFP_CFG_LPM(GPIO13, AF2, FLOAT)
-#define GPIO14_KP_DKIN_2	MFP_CFG_LPM(GPIO14, AF2, FLOAT)
-#define GPIO15_KP_DKIN_3	MFP_CFG_LPM(GPIO15, AF2, FLOAT)
-
-#define GPIO41_KP_DKIN_0	MFP_CFG_LPM(GPIO41, AF2, FLOAT)
-#define GPIO42_KP_DKIN_1	MFP_CFG_LPM(GPIO42, AF2, FLOAT)
-#define GPIO43_KP_DKIN_2	MFP_CFG_LPM(GPIO43, AF2, FLOAT)
-#define GPIO44_KP_DKIN_3	MFP_CFG_LPM(GPIO44, AF2, FLOAT)
-#define GPIO41_KP_DKIN_4	MFP_CFG_LPM(GPIO41, AF4, FLOAT)
-#define GPIO42_KP_DKIN_5	MFP_CFG_LPM(GPIO42, AF4, FLOAT)
-
-#define GPIO0_KP_MKIN_0		MFP_CFG_LPM(GPIO0, AF1, FLOAT)
-#define GPIO2_KP_MKIN_1		MFP_CFG_LPM(GPIO2, AF1, FLOAT)
-#define GPIO4_KP_MKIN_2		MFP_CFG_LPM(GPIO4, AF1, FLOAT)
-#define GPIO6_KP_MKIN_3		MFP_CFG_LPM(GPIO6, AF1, FLOAT)
-#define GPIO8_KP_MKIN_4		MFP_CFG_LPM(GPIO8, AF1, FLOAT)
-#define GPIO10_KP_MKIN_5	MFP_CFG_LPM(GPIO10, AF1, FLOAT)
-#define GPIO12_KP_MKIN_6	MFP_CFG_LPM(GPIO12, AF1, FLOAT)
-#define GPIO14_KP_MKIN_7	MFP_CFG(GPIO14, AF1)
-#define GPIO35_KP_MKIN_5	MFP_CFG(GPIO35, AF4)
-
-#define GPIO1_KP_MKOUT_0	MFP_CFG_LPM(GPIO1, AF1, DRIVE_HIGH)
-#define GPIO3_KP_MKOUT_1	MFP_CFG_LPM(GPIO3, AF1, DRIVE_HIGH)
-#define GPIO5_KP_MKOUT_2	MFP_CFG_LPM(GPIO5, AF1, DRIVE_HIGH)
-#define GPIO7_KP_MKOUT_3	MFP_CFG_LPM(GPIO7, AF1, DRIVE_HIGH)
-#define GPIO9_KP_MKOUT_4	MFP_CFG_LPM(GPIO9, AF1, DRIVE_HIGH)
-#define GPIO11_KP_MKOUT_5	MFP_CFG_LPM(GPIO11, AF1, DRIVE_HIGH)
-#define GPIO13_KP_MKOUT_6	MFP_CFG_LPM(GPIO13, AF1, DRIVE_HIGH)
-#define GPIO15_KP_MKOUT_7	MFP_CFG_LPM(GPIO15, AF1, DRIVE_HIGH)
-#define GPIO36_KP_MKOUT_5	MFP_CFG_LPM(GPIO36, AF4, DRIVE_HIGH)
-
-/* LCD */
-#define GPIO17_LCD_FCLK_RD	MFP_CFG(GPIO17, AF1)
-#define GPIO18_LCD_LCLK_A0	MFP_CFG(GPIO18, AF1)
-#define GPIO19_LCD_PCLK_WR	MFP_CFG(GPIO19, AF1)
-#define GPIO20_LCD_BIAS		MFP_CFG(GPIO20, AF1)
-#define GPIO21_LCD_CS		MFP_CFG(GPIO21, AF1)
-#define GPIO22_LCD_CS2		MFP_CFG(GPIO22, AF2)
-#define GPIO22_LCD_VSYNC	MFP_CFG(GPIO22, AF1)
-#define GPIO23_LCD_DD0		MFP_CFG(GPIO23, AF1)
-#define GPIO24_LCD_DD1		MFP_CFG(GPIO24, AF1)
-#define GPIO25_LCD_DD2		MFP_CFG(GPIO25, AF1)
-#define GPIO26_LCD_DD3		MFP_CFG(GPIO26, AF1)
-#define GPIO27_LCD_DD4		MFP_CFG(GPIO27, AF1)
-#define GPIO28_LCD_DD5		MFP_CFG(GPIO28, AF1)
-#define GPIO29_LCD_DD6		MFP_CFG(GPIO29, AF1)
-#define GPIO30_LCD_DD7		MFP_CFG(GPIO30, AF1)
-#define GPIO31_LCD_DD8		MFP_CFG(GPIO31, AF1)
-#define GPIO32_LCD_DD9		MFP_CFG(GPIO32, AF1)
-#define GPIO33_LCD_DD10		MFP_CFG(GPIO33, AF1)
-#define GPIO34_LCD_DD11		MFP_CFG(GPIO34, AF1)
-#define GPIO35_LCD_DD12		MFP_CFG(GPIO35, AF1)
-#define GPIO36_LCD_DD13		MFP_CFG(GPIO36, AF1)
-#define GPIO37_LCD_DD14		MFP_CFG(GPIO37, AF1)
-#define GPIO38_LCD_DD15		MFP_CFG(GPIO38, AF1)
-#define GPIO39_LCD_DD16		MFP_CFG(GPIO39, AF1)
-#define GPIO40_LCD_DD17		MFP_CFG(GPIO40, AF1)
-#define GPIO41_LCD_CS2		MFP_CFG(GPIO41, AF3)
-#define GPIO42_LCD_VSYNC2	MFP_CFG(GPIO42, AF3)
-#define GPIO44_LCD_DD7		MFP_CFG(GPIO44, AF1)
-
-/* Mini-LCD */
-#define GPIO17_MLCD_FCLK	MFP_CFG(GPIO17, AF3)
-#define GPIO18_MLCD_LCLK	MFP_CFG(GPIO18, AF3)
-#define GPIO19_MLCD_PCLK	MFP_CFG(GPIO19, AF3)
-#define GPIO20_MLCD_BIAS	MFP_CFG(GPIO20, AF3)
-#define GPIO23_MLCD_DD0		MFP_CFG(GPIO23, AF3)
-#define GPIO24_MLCD_DD1		MFP_CFG(GPIO24, AF3)
-#define GPIO25_MLCD_DD2		MFP_CFG(GPIO25, AF3)
-#define GPIO26_MLCD_DD3		MFP_CFG(GPIO26, AF3)
-#define GPIO27_MLCD_DD4		MFP_CFG(GPIO27, AF3)
-#define GPIO28_MLCD_DD5		MFP_CFG(GPIO28, AF3)
-#define GPIO29_MLCD_DD6		MFP_CFG(GPIO29, AF3)
-#define GPIO30_MLCD_DD7		MFP_CFG(GPIO30, AF3)
-#define GPIO31_MLCD_DD8		MFP_CFG(GPIO31, AF3)
-#define GPIO32_MLCD_DD9		MFP_CFG(GPIO32, AF3)
-#define GPIO33_MLCD_DD10	MFP_CFG(GPIO33, AF3)
-#define GPIO34_MLCD_DD11	MFP_CFG(GPIO34, AF3)
-#define GPIO35_MLCD_DD12	MFP_CFG(GPIO35, AF3)
-#define GPIO36_MLCD_DD13	MFP_CFG(GPIO36, AF3)
-#define GPIO37_MLCD_DD14	MFP_CFG(GPIO37, AF3)
-#define GPIO38_MLCD_DD15	MFP_CFG(GPIO38, AF3)
-#define GPIO44_MLCD_DD7		MFP_CFG(GPIO44, AF5)
-
-/* MMC1 */
-#define GPIO10_MMC1_DAT3	MFP_CFG(GPIO10, AF4)
-#define GPIO11_MMC1_DAT2	MFP_CFG(GPIO11, AF4)
-#define GPIO12_MMC1_DAT1	MFP_CFG(GPIO12, AF4)
-#define GPIO13_MMC1_DAT0	MFP_CFG(GPIO13, AF4)
-#define GPIO14_MMC1_CMD		MFP_CFG(GPIO14, AF4)
-#define GPIO15_MMC1_CLK		MFP_CFG(GPIO15, AF4)
-#define GPIO55_MMC1_CMD		MFP_CFG(GPIO55, AF3)
-#define GPIO56_MMC1_CLK		MFP_CFG(GPIO56, AF3)
-#define GPIO57_MMC1_DAT0	MFP_CFG(GPIO57, AF3)
-#define GPIO58_MMC1_DAT1	MFP_CFG(GPIO58, AF3)
-#define GPIO59_MMC1_DAT2	MFP_CFG(GPIO59, AF3)
-#define GPIO60_MMC1_DAT3	MFP_CFG(GPIO60, AF3)
-
-#define DF_ADDR0_MMC1_CLK	MFP_CFG(DF_ADDR0, AF2)
-#define DF_ADDR1_MMC1_CMD	MFP_CFG(DF_ADDR1, AF2)
-#define DF_ADDR2_MMC1_DAT0	MFP_CFG(DF_ADDR2, AF2)
-#define DF_ADDR3_MMC1_DAT1	MFP_CFG(DF_ADDR3, AF3)
-#define nXCVREN_MMC1_DAT2	MFP_CFG(nXCVREN, AF2)
-
-/* MMC2 */
-#define GPIO31_MMC2_CMD		MFP_CFG(GPIO31, AF7)
-#define GPIO32_MMC2_CLK		MFP_CFG(GPIO32, AF7)
-#define GPIO33_MMC2_DAT0	MFP_CFG(GPIO33, AF7)
-#define GPIO34_MMC2_DAT1	MFP_CFG(GPIO34, AF7)
-#define GPIO35_MMC2_DAT2	MFP_CFG(GPIO35, AF7)
-#define GPIO36_MMC2_DAT3	MFP_CFG(GPIO36, AF7)
-
-#define GPIO101_MMC2_DAT3	MFP_CFG(GPIO101, AF1)
-#define GPIO102_MMC2_DAT2	MFP_CFG(GPIO102, AF1)
-#define GPIO103_MMC2_DAT1	MFP_CFG(GPIO103, AF1)
-#define GPIO104_MMC2_DAT0	MFP_CFG(GPIO104, AF1)
-#define GPIO105_MMC2_CMD	MFP_CFG(GPIO105, AF1)
-#define GPIO106_MMC2_CLK	MFP_CFG(GPIO106, AF1)
-
-#define DF_IO10_MMC2_DAT3	MFP_CFG(DF_IO10, AF3)
-#define DF_IO11_MMC2_DAT2	MFP_CFG(DF_IO11, AF3)
-#define DF_IO12_MMC2_DAT1	MFP_CFG(DF_IO12, AF3)
-#define DF_IO13_MMC2_DAT0	MFP_CFG(DF_IO13, AF3)
-#define DF_IO14_MMC2_CLK	MFP_CFG(DF_IO14, AF3)
-#define DF_IO15_MMC2_CMD	MFP_CFG(DF_IO15, AF3)
-
-/* BSSP1 */
-#define GPIO12_BSSP1_CLK	MFP_CFG(GPIO12, AF3)
-#define GPIO13_BSSP1_FRM	MFP_CFG(GPIO13, AF3)
-#define GPIO14_BSSP1_RXD	MFP_CFG(GPIO14, AF3)
-#define GPIO15_BSSP1_TXD	MFP_CFG(GPIO15, AF3)
-#define GPIO97_BSSP1_CLK	MFP_CFG(GPIO97, AF5)
-#define GPIO98_BSSP1_FRM	MFP_CFG(GPIO98, AF5)
-
-/* BSSP2 */
-#define GPIO84_BSSP2_SDATA_IN	MFP_CFG(GPIO84, AF1)
-#define GPIO85_BSSP2_BITCLK	MFP_CFG(GPIO85, AF1)
-#define GPIO86_BSSP2_SYSCLK	MFP_CFG(GPIO86, AF1)
-#define GPIO87_BSSP2_SYNC	MFP_CFG(GPIO87, AF1)
-#define GPIO88_BSSP2_DATA_OUT	MFP_CFG(GPIO88, AF1)
-#define GPIO86_BSSP2_SDATA_IN	MFP_CFG(GPIO86, AF4)
-
-/* BSSP3 */
-#define GPIO79_BSSP3_CLK	MFP_CFG(GPIO79, AF1)
-#define GPIO80_BSSP3_FRM	MFP_CFG(GPIO80, AF1)
-#define GPIO81_BSSP3_TXD	MFP_CFG(GPIO81, AF1)
-#define GPIO82_BSSP3_RXD	MFP_CFG(GPIO82, AF1)
-#define GPIO83_BSSP3_SYSCLK	MFP_CFG(GPIO83, AF1)
-
-/* BSSP4 */
-#define GPIO43_BSSP4_CLK	MFP_CFG(GPIO43, AF4)
-#define GPIO44_BSSP4_FRM	MFP_CFG(GPIO44, AF4)
-#define GPIO45_BSSP4_TXD	MFP_CFG(GPIO45, AF4)
-#define GPIO46_BSSP4_RXD	MFP_CFG(GPIO46, AF4)
-
-#define GPIO51_BSSP4_CLK	MFP_CFG(GPIO51, AF4)
-#define GPIO52_BSSP4_FRM	MFP_CFG(GPIO52, AF4)
-#define GPIO53_BSSP4_TXD	MFP_CFG(GPIO53, AF4)
-#define GPIO54_BSSP4_RXD	MFP_CFG(GPIO54, AF4)
-
-/* GSSP1 */
-#define GPIO79_GSSP1_CLK	MFP_CFG(GPIO79, AF2)
-#define GPIO80_GSSP1_FRM	MFP_CFG(GPIO80, AF2)
-#define GPIO81_GSSP1_TXD	MFP_CFG(GPIO81, AF2)
-#define GPIO82_GSSP1_RXD	MFP_CFG(GPIO82, AF2)
-#define GPIO83_GSSP1_SYSCLK	MFP_CFG(GPIO83, AF2)
-
-#define GPIO93_GSSP1_CLK	MFP_CFG(GPIO93, AF4)
-#define GPIO94_GSSP1_FRM	MFP_CFG(GPIO94, AF4)
-#define GPIO95_GSSP1_TXD	MFP_CFG(GPIO95, AF4)
-#define GPIO96_GSSP1_RXD	MFP_CFG(GPIO96, AF4)
-
-/* GSSP2 */
-#define GPIO47_GSSP2_CLK	MFP_CFG(GPIO47, AF4)
-#define GPIO48_GSSP2_FRM	MFP_CFG(GPIO48, AF4)
-#define GPIO49_GSSP2_RXD	MFP_CFG(GPIO49, AF4)
-#define GPIO50_GSSP2_TXD	MFP_CFG(GPIO50, AF4)
-
-#define GPIO69_GSSP2_CLK	MFP_CFG(GPIO69, AF4)
-#define GPIO70_GSSP2_FRM	MFP_CFG(GPIO70, AF4)
-#define GPIO71_GSSP2_RXD	MFP_CFG(GPIO71, AF4)
-#define GPIO72_GSSP2_TXD	MFP_CFG(GPIO72, AF4)
-
-#define GPIO84_GSSP2_RXD	MFP_CFG(GPIO84, AF2)
-#define GPIO85_GSSP2_CLK	MFP_CFG(GPIO85, AF2)
-#define GPIO86_GSSP2_SYSCLK	MFP_CFG(GPIO86, AF2)
-#define GPIO87_GSSP2_FRM	MFP_CFG(GPIO87, AF2)
-#define GPIO88_GSSP2_TXD	MFP_CFG(GPIO88, AF2)
-#define GPIO86_GSSP2_RXD	MFP_CFG(GPIO86, AF5)
-
-#define GPIO103_GSSP2_CLK	MFP_CFG(GPIO103, AF2)
-#define GPIO104_GSSP2_FRM	MFP_CFG(GPIO104, AF2)
-#define GPIO105_GSSP2_RXD	MFP_CFG(GPIO105, AF2)
-#define GPIO106_GSSP2_TXD	MFP_CFG(GPIO106, AF2)
-
-/* UART1 - FFUART */
-#define GPIO47_UART1_DSR_N	MFP_CFG(GPIO47, AF1)
-#define GPIO48_UART1_DTR_N	MFP_CFG(GPIO48, AF1)
-#define GPIO49_UART1_RI		MFP_CFG(GPIO49, AF1)
-#define GPIO50_UART1_DCD	MFP_CFG(GPIO50, AF1)
-#define GPIO51_UART1_CTS	MFP_CFG(GPIO51, AF1)
-#define GPIO52_UART1_RTS	MFP_CFG(GPIO52, AF1)
-#define GPIO53_UART1_RXD	MFP_CFG(GPIO53, AF1)
-#define GPIO54_UART1_TXD	MFP_CFG(GPIO54, AF1)
-
-#define GPIO63_UART1_TXD	MFP_CFG(GPIO63, AF2)
-#define GPIO64_UART1_RXD	MFP_CFG(GPIO64, AF2)
-#define GPIO65_UART1_DSR	MFP_CFG(GPIO65, AF2)
-#define GPIO66_UART1_DTR	MFP_CFG(GPIO66, AF2)
-#define GPIO67_UART1_RI		MFP_CFG(GPIO67, AF2)
-#define GPIO68_UART1_DCD	MFP_CFG(GPIO68, AF2)
-#define GPIO69_UART1_CTS	MFP_CFG(GPIO69, AF2)
-#define GPIO70_UART1_RTS	MFP_CFG(GPIO70, AF2)
-
-#define GPIO53_UART1_TXD	MFP_CFG(GPIO53, AF2)
-#define GPIO54_UART1_RXD	MFP_CFG(GPIO54, AF2)
-
-/* UART2 - BTUART */
-#define GPIO91_UART2_RXD	MFP_CFG(GPIO91, AF1)
-#define GPIO92_UART2_TXD	MFP_CFG(GPIO92, AF1)
-#define GPIO93_UART2_CTS	MFP_CFG(GPIO93, AF1)
-#define GPIO94_UART2_RTS	MFP_CFG(GPIO94, AF1)
-
-/* UART3 - STUART */
-#define GPIO43_UART3_RTS	MFP_CFG(GPIO43, AF3)
-#define GPIO44_UART3_CTS	MFP_CFG(GPIO44, AF3)
-#define GPIO45_UART3_RXD	MFP_CFG(GPIO45, AF3)
-#define GPIO46_UART3_TXD	MFP_CFG(GPIO46, AF3)
-
-#define GPIO75_UART3_RTS	MFP_CFG(GPIO75, AF5)
-#define GPIO76_UART3_CTS	MFP_CFG(GPIO76, AF5)
-#define GPIO77_UART3_TXD	MFP_CFG(GPIO77, AF5)
-#define GPIO78_UART3_RXD	MFP_CFG(GPIO78, AF5)
-
-/* DFI */
-#define DF_IO0_DF_IO0		MFP_CFG(DF_IO0, AF2)
-#define DF_IO1_DF_IO1		MFP_CFG(DF_IO1, AF2)
-#define DF_IO2_DF_IO2		MFP_CFG(DF_IO2, AF2)
-#define DF_IO3_DF_IO3		MFP_CFG(DF_IO3, AF2)
-#define DF_IO4_DF_IO4		MFP_CFG(DF_IO4, AF2)
-#define DF_IO5_DF_IO5		MFP_CFG(DF_IO5, AF2)
-#define DF_IO6_DF_IO6		MFP_CFG(DF_IO6, AF2)
-#define DF_IO7_DF_IO7		MFP_CFG(DF_IO7, AF2)
-#define DF_IO8_DF_IO8		MFP_CFG(DF_IO8, AF2)
-#define DF_IO9_DF_IO9		MFP_CFG(DF_IO9, AF2)
-#define DF_IO10_DF_IO10		MFP_CFG(DF_IO10, AF2)
-#define DF_IO11_DF_IO11		MFP_CFG(DF_IO11, AF2)
-#define DF_IO12_DF_IO12		MFP_CFG(DF_IO12, AF2)
-#define DF_IO13_DF_IO13		MFP_CFG(DF_IO13, AF2)
-#define DF_IO14_DF_IO14		MFP_CFG(DF_IO14, AF2)
-#define DF_IO15_DF_IO15		MFP_CFG(DF_IO15, AF2)
-#define DF_nADV1_ALE_DF_nADV1	MFP_CFG(DF_nADV1_ALE, AF2)
-#define DF_nADV2_ALE_DF_nADV2	MFP_CFG(DF_nADV2_ALE, AF2)
-#define DF_nCS0_DF_nCS0		MFP_CFG(DF_nCS0, AF2)
-#define DF_nCS1_DF_nCS1		MFP_CFG(DF_nCS1, AF2)
-#define DF_nRE_nOE_DF_nOE	MFP_CFG(DF_nRE_nOE, AF2)
-#define DF_nWE_DF_nWE		MFP_CFG(DF_nWE, AF2)
-
-/* DFI - NAND */
-#define DF_CLE_nOE_ND_CLE	MFP_CFG_LPM(DF_CLE_nOE, AF1, PULL_HIGH)
-#define DF_INT_RnB_ND_INT_RnB	MFP_CFG_LPM(DF_INT_RnB, AF1, PULL_LOW)
-#define DF_IO0_ND_IO0		MFP_CFG_LPM(DF_IO0, AF1, PULL_LOW)
-#define DF_IO1_ND_IO1		MFP_CFG_LPM(DF_IO1, AF1, PULL_LOW)
-#define DF_IO2_ND_IO2		MFP_CFG_LPM(DF_IO2, AF1, PULL_LOW)
-#define DF_IO3_ND_IO3		MFP_CFG_LPM(DF_IO3, AF1, PULL_LOW)
-#define DF_IO4_ND_IO4		MFP_CFG_LPM(DF_IO4, AF1, PULL_LOW)
-#define DF_IO5_ND_IO5		MFP_CFG_LPM(DF_IO5, AF1, PULL_LOW)
-#define DF_IO6_ND_IO6		MFP_CFG_LPM(DF_IO6, AF1, PULL_LOW)
-#define DF_IO7_ND_IO7		MFP_CFG_LPM(DF_IO7, AF1, PULL_LOW)
-#define DF_IO8_ND_IO8		MFP_CFG_LPM(DF_IO8, AF1, PULL_LOW)
-#define DF_IO9_ND_IO9		MFP_CFG_LPM(DF_IO9, AF1, PULL_LOW)
-#define DF_IO10_ND_IO10		MFP_CFG_LPM(DF_IO10, AF1, PULL_LOW)
-#define DF_IO11_ND_IO11		MFP_CFG_LPM(DF_IO11, AF1, PULL_LOW)
-#define DF_IO12_ND_IO12		MFP_CFG_LPM(DF_IO12, AF1, PULL_LOW)
-#define DF_IO13_ND_IO13		MFP_CFG_LPM(DF_IO13, AF1, PULL_LOW)
-#define DF_IO14_ND_IO14		MFP_CFG_LPM(DF_IO14, AF1, PULL_LOW)
-#define DF_IO15_ND_IO15		MFP_CFG_LPM(DF_IO15, AF1, PULL_LOW)
-#define DF_nADV1_ALE_ND_ALE	MFP_CFG_LPM(DF_nADV1_ALE, AF1, PULL_HIGH)
-#define DF_nADV2_ALE_ND_ALE	MFP_CFG_LPM(DF_nADV2_ALE, AF1, PULL_HIGH)
-#define	DF_nADV2_ALE_nCS3	MFP_CFG_LPM(DF_nADV2_ALE, AF3, PULL_HIGH)
-#define DF_nCS0_ND_nCS0		MFP_CFG_LPM(DF_nCS0, AF1, PULL_HIGH)
-#define DF_nCS1_ND_nCS1		MFP_CFG_LPM(DF_nCS1, AF1, PULL_HIGH)
-#define DF_nRE_nOE_ND_nRE	MFP_CFG_LPM(DF_nRE_nOE, AF1, PULL_HIGH)
-#define DF_nWE_ND_nWE		MFP_CFG_LPM(DF_nWE, AF1, PULL_HIGH)
-
-/* PWM */
-#define GPIO41_PWM0		MFP_CFG_LPM(GPIO41, AF1, PULL_LOW)
-#define GPIO42_PWM1		MFP_CFG_LPM(GPIO42, AF1, PULL_LOW)
-#define GPIO43_PWM3		MFP_CFG_LPM(GPIO43, AF1, PULL_LOW)
-#define GPIO20_PWM0		MFP_CFG_LPM(GPIO20, AF2, PULL_LOW)
-#define GPIO21_PWM2		MFP_CFG_LPM(GPIO21, AF3, PULL_LOW)
-#define GPIO22_PWM3		MFP_CFG_LPM(GPIO22, AF3, PULL_LOW)
-#define GPIO32_PWM0		MFP_CFG_LPM(GPIO32, AF4, PULL_LOW)
-
-/* CIR */
-#define GPIO46_CIR_OUT		MFP_CFG(GPIO46, AF1)
-#define GPIO77_CIR_OUT		MFP_CFG(GPIO77, AF3)
-
-/* USB P2 */
-#define GPIO0_USB_P2_7		MFP_CFG(GPIO0, AF3)
-#define GPIO15_USB_P2_7		MFP_CFG(GPIO15, AF5)
-#define GPIO16_USB_P2_7		MFP_CFG(GPIO16, AF2)
-#define GPIO48_USB_P2_7		MFP_CFG(GPIO48, AF7)
-#define GPIO49_USB_P2_7		MFP_CFG(GPIO49, AF6)
-#define DF_IO9_USB_P2_7		MFP_CFG(DF_IO9, AF3)
-
-#define GPIO48_USB_P2_8		MFP_CFG(GPIO48, AF2)
-#define GPIO50_USB_P2_7		MFP_CFG_X(GPIO50, AF2, DS02X, FLOAT)
-#define GPIO51_USB_P2_5		MFP_CFG(GPIO51, AF2)
-#define GPIO47_USB_P2_4		MFP_CFG(GPIO47, AF2)
-#define GPIO53_USB_P2_3		MFP_CFG(GPIO53, AF2)
-#define GPIO54_USB_P2_6		MFP_CFG(GPIO54, AF2)
-#define GPIO49_USB_P2_2		MFP_CFG(GPIO49, AF2)
-#define GPIO52_USB_P2_1		MFP_CFG(GPIO52, AF2)
-
-#define GPIO63_USB_P2_8		MFP_CFG(GPIO63, AF3)
-#define GPIO64_USB_P2_7		MFP_CFG(GPIO64, AF3)
-#define GPIO65_USB_P2_6		MFP_CFG(GPIO65, AF3)
-#define GPIO66_USG_P2_5		MFP_CFG(GPIO66, AF3)
-#define GPIO67_USB_P2_4		MFP_CFG(GPIO67, AF3)
-#define GPIO68_USB_P2_3		MFP_CFG(GPIO68, AF3)
-#define GPIO69_USB_P2_2		MFP_CFG(GPIO69, AF3)
-#define GPIO70_USB_P2_1		MFP_CFG(GPIO70, AF3)
-
-/* ULPI */
-#define GPIO31_USB_ULPI_D0	MFP_CFG(GPIO31, AF4)
-#define GPIO30_USB_ULPI_D1	MFP_CFG(GPIO30, AF7)
-#define GPIO33_USB_ULPI_D2	MFP_CFG(GPIO33, AF5)
-#define GPIO34_USB_ULPI_D3	MFP_CFG(GPIO34, AF5)
-#define GPIO35_USB_ULPI_D4	MFP_CFG(GPIO35, AF5)
-#define GPIO36_USB_ULPI_D5	MFP_CFG(GPIO36, AF5)
-#define GPIO41_USB_ULPI_D6	MFP_CFG(GPIO41, AF5)
-#define GPIO42_USB_ULPI_D7	MFP_CFG(GPIO42, AF5)
-#define GPIO37_USB_ULPI_DIR	MFP_CFG(GPIO37, AF4)
-#define GPIO38_USB_ULPI_CLK	MFP_CFG(GPIO38, AF4)
-#define GPIO39_USB_ULPI_STP	MFP_CFG(GPIO39, AF4)
-#define GPIO40_USB_ULPI_NXT	MFP_CFG(GPIO40, AF4)
-
-#define GPIO3_CLK26MOUTDMD	MFP_CFG(GPIO3, AF3)
-#define GPIO40_CLK26MOUTDMD	MFP_CFG(GPIO40, AF7)
-#define GPIO94_CLK26MOUTDMD	MFP_CFG(GPIO94, AF5)
-#define GPIO104_CLK26MOUTDMD	MFP_CFG(GPIO104, AF4)
-#define DF_ADDR1_CLK26MOUTDMD	MFP_CFG(DF_ADDR2, AF3)
-#define DF_ADDR3_CLK26MOUTDMD	MFP_CFG(DF_ADDR3, AF3)
-
-#define GPIO14_CLK26MOUT	MFP_CFG(GPIO14, AF5)
-#define GPIO38_CLK26MOUT	MFP_CFG(GPIO38, AF7)
-#define GPIO92_CLK26MOUT	MFP_CFG(GPIO92, AF5)
-#define GPIO105_CLK26MOUT	MFP_CFG(GPIO105, AF4)
-
-#define GPIO2_CLK13MOUTDMD	MFP_CFG(GPIO2, AF3)
-#define GPIO39_CLK13MOUTDMD	MFP_CFG(GPIO39, AF7)
-#define GPIO50_CLK13MOUTDMD	MFP_CFG(GPIO50, AF3)
-#define GPIO93_CLK13MOUTDMD	MFP_CFG(GPIO93, AF5)
-#define GPIO103_CLK13MOUTDMD	MFP_CFG(GPIO103, AF4)
-#define DF_ADDR2_CLK13MOUTDMD	MFP_CFG(DF_ADDR2, AF3)
-
-/* 1 wire */
-#define GPIO95_OW_DQ_IN		MFP_CFG(GPIO95, AF5)
-
-#endif /* __ASM_ARCH_MFP_PXA9xx_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/mfp.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/mfp.h
deleted file mode 100644
index 271e249a..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/mfp.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * arch/arm/mach-pxa/include/mach/mfp.h
- *
- * Multi-Function Pin Definitions
- *
- * Copyright (C) 2007 Marvell International Ltd.
- *
- * 2007-8-21: eric miao <eric.miao@marvell.com>
- *            initial version
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_MFP_H
-#define __ASM_ARCH_MFP_H
-
-#include <plat/mfp.h>
-
-#endif /* __ASM_ARCH_MFP_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/mioa701.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/mioa701.h
deleted file mode 100644
index 02868447..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/mioa701.h
+++ /dev/null
@@ -1,72 +0,0 @@
-#ifndef _MIOA701_H_
-#define _MIOA701_H_
-
-#define MIO_CFG_IN(pin, af)		\
-	((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DIR_MASK)) |\
-	 (MFP_PIN(pin) | MFP_##af | MFP_DIR_IN))
-
-#define MIO_CFG_OUT(pin, af, state)	\
-	((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DIR_MASK | MFP_LPM_STATE_MASK)) |\
-	 (MFP_PIN(pin) | MFP_##af | MFP_DIR_OUT | MFP_LPM_##state))
-
-/* Global GPIOs */
-#define GPIO9_CHARGE_EN				9
-#define GPIO18_POWEROFF				18
-#define GPIO87_LCD_POWER			87
-#define GPIO96_AC_DETECT			96
-#define GPIO80_MAYBE_CHARGE_VDROP		80	/* Drop of 88mV */
-
-/* USB */
-#define GPIO13_nUSB_DETECT			13
-#define GPIO22_USB_ENABLE			22
-
-/* SDIO bits */
-#define GPIO78_SDIO_RO				78
-#define GPIO15_SDIO_INSERT			15
-#define GPIO91_SDIO_EN				91
-
-/* Bluetooth */
-#define GPIO14_BT_nACTIVITY			14
-#define GPIO83_BT_ON				83
-#define GPIO77_BT_UNKNOWN1			77
-#define GPIO86_BT_MAYBE_nRESET			86
-
-/* GPS */
-#define GPIO23_GPS_UNKNOWN1			23
-#define GPIO26_GPS_ON				26
-#define GPIO27_GPS_RESET			27
-#define GPIO106_GPS_UNKNOWN2			106
-#define GPIO107_GPS_UNKNOWN3			107
-
-/* GSM */
-#define GPIO24_GSM_MOD_RESET_CMD		24
-#define GPIO88_GSM_nMOD_ON_CMD			88
-#define GPIO90_GSM_nMOD_OFF_CMD			90
-#define GPIO114_GSM_nMOD_DTE_UART_STATE 	114
-#define GPIO25_GSM_MOD_ON_STATE			25
-#define GPIO113_GSM_EVENT			113
-
-/* SOUND */
-#define GPIO12_HPJACK_INSERT			12
-
-/* LEDS */
-#define GPIO10_LED_nCharging			10
-#define GPIO97_LED_nBlue			97
-#define GPIO98_LED_nOrange			98
-#define GPIO82_LED_nVibra			82
-#define GPIO115_LED_nKeyboard			115
-
-/* Keyboard */
-#define GPIO0_KEY_POWER				0
-#define GPIO93_KEY_VOLUME_UP			93
-#define GPIO94_KEY_VOLUME_DOWN			94
-
-extern struct input_dev *mioa701_evdev;
-extern void mioa701_gpio_lpm_set(unsigned long mfp_pin);
-
-/* Assembler externals mioa701_bootresume.S */
-extern u32 mioa701_bootstrap;
-extern u32 mioa701_jumpaddr;
-extern u32 mioa701_bootstrap_lg;
-
-#endif /* _MIOA701_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/mmc.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/mmc.h
deleted file mode 100644
index 9eb515bb..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/mmc.h
+++ /dev/null
@@ -1,28 +0,0 @@
-#ifndef ASMARM_ARCH_MMC_H
-#define ASMARM_ARCH_MMC_H
-
-#include <linux/mmc/host.h>
-#include <linux/interrupt.h>
-
-struct device;
-struct mmc_host;
-
-struct pxamci_platform_data {
-	unsigned int ocr_mask;			/* available voltages */
-	unsigned long detect_delay_ms;		/* delay in millisecond before detecting cards after interrupt */
-	int (*init)(struct device *, irq_handler_t , void *);
-	int (*get_ro)(struct device *);
-	void (*setpower)(struct device *, unsigned int);
-	void (*exit)(struct device *, void *);
-	int gpio_card_detect;			/* gpio detecting card insertion */
-	int gpio_card_ro;			/* gpio detecting read only toggle */
-	bool gpio_card_ro_invert;		/* gpio ro is inverted */
-	int gpio_power;				/* gpio powering up MMC bus */
-	bool gpio_power_invert;			/* gpio power is inverted */
-};
-
-extern void pxa_set_mci_info(struct pxamci_platform_data *info);
-extern void pxa3xx_set_mci2_info(struct pxamci_platform_data *info);
-extern void pxa3xx_set_mci3_info(struct pxamci_platform_data *info);
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/mtd-xip.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/mtd-xip.h
deleted file mode 100644
index 990d2bf2..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/mtd-xip.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * MTD primitives for XIP support. Architecture specific functions
- *
- * Do not include this file directly. It's included from linux/mtd/xip.h
- * 
- * Author:	Nicolas Pitre
- * Created:	Nov 2, 2004
- * Copyright:	(C) 2004 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ARCH_PXA_MTD_XIP_H__
-#define __ARCH_PXA_MTD_XIP_H__
-
-#include <mach/regs-ost.h>
-
-#define xip_irqpending()	(ICIP & ICMR)
-
-/* we sample OSCR and convert desired delta to usec (1/4 ~= 1000000/3686400) */
-#define xip_currtime()		(OSCR)
-#define xip_elapsed_since(x)	(signed)((OSCR - (x)) / 4)
-
-/*
- * xip_cpu_idle() is used when waiting for a delay equal or larger than
- * the system timer tick period.  This should put the CPU into idle mode
- * to save power and to be woken up only when some interrupts are pending.
- * As above, this should not rely upon standard kernel code.
- */
-
-#define xip_cpu_idle()  asm volatile ("mcr p14, 0, %0, c7, c0, 0" :: "r" (1))
-
-#endif /* __ARCH_PXA_MTD_XIP_H__ */
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/mxm8x10.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/mxm8x10.h
deleted file mode 100644
index ffa15665..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/mxm8x10.h
+++ /dev/null
@@ -1,21 +0,0 @@
-#ifndef __MACH_MXM_8X10_H
-#define __MACH_MXM_8X10_H
-
-#define MXM_8X10_ETH_PHYS	0x13000000
-
-#if defined(CONFIG_MMC)
-
-#define MXM_8X10_SD_nCD (72)
-#define MXM_8X10_SD_WP (84)
-
-extern void mxm_8x10_mmc_init(void);
-#else
-static inline void mxm_8x10_mmc_init(void) {}
-#endif
-
-extern void mxm_8x10_usb_host_init(void);
-extern void mxm_8x10_ac97_init(void);
-
-extern void mxm_8x10_barebones_init(void);
-
-#endif /* __MACH_MXM_8X10_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/ohci.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/ohci.h
deleted file mode 100644
index 95b6e2a6..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/ohci.h
+++ /dev/null
@@ -1,36 +0,0 @@
-#ifndef ASMARM_ARCH_OHCI_H
-#define ASMARM_ARCH_OHCI_H
-
-struct device;
-
-struct pxaohci_platform_data {
-	int (*init)(struct device *);
-	void (*exit)(struct device *);
-
-	unsigned long flags;
-#define ENABLE_PORT1		(1 << 0)
-#define ENABLE_PORT2		(1 << 1)
-#define ENABLE_PORT3		(1 << 2)
-#define ENABLE_PORT_ALL		(ENABLE_PORT1 | ENABLE_PORT2 | ENABLE_PORT3)
-
-#define POWER_SENSE_LOW		(1 << 3)
-#define POWER_CONTROL_LOW	(1 << 4)
-#define NO_OC_PROTECTION	(1 << 5)
-#define OC_MODE_GLOBAL		(0 << 6)
-#define OC_MODE_PERPORT		(1 << 6)
-
-	int power_on_delay;	/* Power On to Power Good time - in ms
-				 * HCD must wait for this duration before
-				 * accessing a powered on port
-				 */
-	int port_mode;
-#define PMM_NPS_MODE           1
-#define PMM_GLOBAL_MODE        2
-#define PMM_PERPORT_MODE       3
-
-	int power_budget;
-};
-
-extern void pxa_set_ohci_info(struct pxaohci_platform_data *info);
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/palm27x.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/palm27x.h
deleted file mode 100644
index d4eac3d6..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/palm27x.h
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- * Common functions for Palm LD, T5, TX, Z72
- *
- * Copyright (C) 2010
- * Marek Vasut <marek.vasut@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-#ifndef	__INCLUDE_MACH_PALM27X__
-#define	__INCLUDE_MACH_PALM27X__
-
-#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
-extern void __init palm27x_mmc_init(int detect, int ro, int power,
-					int power_inverted);
-#else
-static inline void palm27x_mmc_init(int detect, int ro, int power,
-					int power_inverted)
-{}
-#endif
-
-#if defined(CONFIG_SUSPEND)
-extern void __init palm27x_pm_init(unsigned long str_base);
-#else
-static inline void palm27x_pm_init(unsigned long str_base) {}
-#endif
-
-#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
-extern struct pxafb_mode_info palm_320x480_lcd_mode;
-extern struct pxafb_mode_info palm_320x320_lcd_mode;
-extern struct pxafb_mode_info palm_320x320_new_lcd_mode;
-extern void __init palm27x_lcd_init(int power,
-					struct pxafb_mode_info *mode);
-#else
-#define palm27x_lcd_init(power, mode)	do {} while (0)
-#endif
-
-#if	defined(CONFIG_USB_PXA27X) || \
-	defined(CONFIG_USB_PXA27X_MODULE)
-extern void __init palm27x_udc_init(int vbus, int pullup,
-					int vbus_inverted);
-#else
-static inline void palm27x_udc_init(int vbus, int pullup, int vbus_inverted) {}
-#endif
-
-#if defined(CONFIG_IRDA) || defined(CONFIG_IRDA_MODULE)
-extern void __init palm27x_irda_init(int pwdn);
-#else
-static inline void palm27x_irda_init(int pwdn) {}
-#endif
-
-#if	defined(CONFIG_TOUCHSCREEN_WM97XX) || \
-	defined(CONFIG_TOUCHSCREEN_WM97XX_MODULE)
-extern void __init palm27x_ac97_init(int minv, int maxv, int jack,
-					int reset);
-#else
-static inline void palm27x_ac97_init(int minv, int maxv, int jack, int reset) {}
-#endif
-
-#if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE)
-extern void __init palm27x_pwm_init(int bl, int lcd);
-#else
-static inline void palm27x_pwm_init(int bl, int lcd) {}
-#endif
-
-#if defined(CONFIG_PDA_POWER) || defined(CONFIG_PDA_POWER_MODULE)
-extern void __init palm27x_power_init(int ac, int usb);
-#else
-static inline void palm27x_power_init(int ac, int usb) {}
-#endif
-
-#if defined(CONFIG_REGULATOR_MAX1586) || \
-    defined(CONFIG_REGULATOR_MAX1586_MODULE)
-extern void __init palm27x_pmic_init(void);
-#else
-static inline void palm27x_pmic_init(void) {}
-#endif
-
-#endif	/* __INCLUDE_MACH_PALM27X__ */
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/palmasoc.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/palmasoc.h
deleted file mode 100644
index 58afb30d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/palmasoc.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef _INCLUDE_PALMASOC_H_
-#define _INCLUDE_PALMASOC_H_
-
-struct palm27x_asoc_info {
-	int	jack_gpio;
-};
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/palmld.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/palmld.h
deleted file mode 100644
index 2c447133..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/palmld.h
+++ /dev/null
@@ -1,109 +0,0 @@
-/*
- * GPIOs and interrupts for Palm LifeDrive Handheld Computer
- *
- * Authors:	Alex Osborne <ato@meshy.org>
- *		Marek Vasut <marek.vasut@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef _INCLUDE_PALMLD_H_
-#define _INCLUDE_PALMLD_H_
-
-/** HERE ARE GPIOs **/
-
-/* GPIOs */
-#define GPIO_NR_PALMLD_GPIO_RESET	1
-#define GPIO_NR_PALMLD_POWER_DETECT	4
-#define GPIO_NR_PALMLD_HOTSYNC_BUTTON_N	10
-#define GPIO_NR_PALMLD_POWER_SWITCH	12
-#define GPIO_NR_PALMLD_EARPHONE_DETECT 	13
-#define GPIO_NR_PALMLD_LOCK_SWITCH	15
-
-/* SD/MMC */
-#define GPIO_NR_PALMLD_SD_DETECT_N	14
-#define GPIO_NR_PALMLD_SD_POWER		114
-#define GPIO_NR_PALMLD_SD_READONLY	116
-
-/* TOUCHSCREEN */
-#define GPIO_NR_PALMLD_WM9712_IRQ	27
-
-/* IRDA */
-#define GPIO_NR_PALMLD_IR_DISABLE	108
-
-/* LCD/BACKLIGHT */
-#define GPIO_NR_PALMLD_BL_POWER		19
-#define GPIO_NR_PALMLD_LCD_POWER	96
-
-/* LCD BORDER */
-#define GPIO_NR_PALMLD_BORDER_SWITCH	21
-#define GPIO_NR_PALMLD_BORDER_SELECT	22
-
-/* BLUETOOTH */
-#define GPIO_NR_PALMLD_BT_POWER		17
-#define GPIO_NR_PALMLD_BT_RESET		83
-
-/* PCMCIA (WiFi) */
-#define GPIO_NR_PALMLD_PCMCIA_READY	38
-#define GPIO_NR_PALMLD_PCMCIA_POWER	36
-#define GPIO_NR_PALMLD_PCMCIA_RESET	81
-
-/* LEDs */
-#define GPIO_NR_PALMLD_LED_GREEN	52
-#define GPIO_NR_PALMLD_LED_AMBER	94
-
-/* IDE */
-#define GPIO_NR_PALMLD_IDE_RESET	98
-#define GPIO_NR_PALMLD_IDE_PWEN		115
-
-/* USB */
-#define GPIO_NR_PALMLD_USB_DETECT_N	3
-#define GPIO_NR_PALMLD_USB_READY	86
-#define GPIO_NR_PALMLD_USB_RESET	88
-#define GPIO_NR_PALMLD_USB_INT		106
-#define GPIO_NR_PALMLD_USB_POWER	118
-/* 20, 53 and 86 are usb related too */
-
-/* INTERRUPTS */
-#define IRQ_GPIO_PALMLD_GPIO_RESET	PXA_GPIO_TO_IRQ(GPIO_NR_PALMLD_GPIO_RESET)
-#define IRQ_GPIO_PALMLD_SD_DETECT_N	PXA_GPIO_TO_IRQ(GPIO_NR_PALMLD_SD_DETECT_N)
-#define IRQ_GPIO_PALMLD_WM9712_IRQ	PXA_GPIO_TO_IRQ(GPIO_NR_PALMLD_WM9712_IRQ)
-#define IRQ_GPIO_PALMLD_IDE_IRQ		PXA_GPIO_TO_IRQ(GPIO_NR_PALMLD_IDE_IRQ)
-
-
-/** HERE ARE INIT VALUES **/
-
-/* IO mappings */
-#define PALMLD_USB_PHYS		PXA_CS2_PHYS
-#define PALMLD_USB_VIRT		0xf0000000
-#define PALMLD_USB_SIZE		0x00100000
-
-#define PALMLD_IDE_PHYS		0x20000000
-#define PALMLD_IDE_VIRT		0xf1000000
-#define PALMLD_IDE_SIZE		0x00100000
-
-#define PALMLD_PHYS_IO_START	0x40000000
-#define PALMLD_STR_BASE		0xa0200000
-
-/* BATTERY */
-#define PALMLD_BAT_MAX_VOLTAGE		4000	/* 4.00V maximum voltage */
-#define PALMLD_BAT_MIN_VOLTAGE		3550	/* 3.55V critical voltage */
-#define PALMLD_BAT_MAX_CURRENT		0	/* unknown */
-#define PALMLD_BAT_MIN_CURRENT		0	/* unknown */
-#define PALMLD_BAT_MAX_CHARGE		1	/* unknown */
-#define PALMLD_BAT_MIN_CHARGE		1	/* unknown */
-#define PALMLD_MAX_LIFE_MINS		240	/* on-life in minutes */
-
-#define PALMLD_BAT_MEASURE_DELAY	(HZ * 1)
-
-/* BACKLIGHT */
-#define PALMLD_MAX_INTENSITY		0xFE
-#define PALMLD_DEFAULT_INTENSITY	0x7E
-#define PALMLD_LIMIT_MASK		0x7F
-#define PALMLD_PRESCALER		0x3F
-#define PALMLD_PERIOD_NS		3500
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/palmt5.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/palmt5.h
deleted file mode 100644
index 0bd4f036..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/palmt5.h
+++ /dev/null
@@ -1,84 +0,0 @@
-/*
- * GPIOs and interrupts for Palm Tungsten|T5 Handheld Computer
- *
- * Authors:	Ales Snuparek <snuparek@atlas.cz>
- *		Marek Vasut <marek.vasut@gmail.com>
- *		Justin Kendrick <twilightsentry@gmail.com>
- *		RichardT5 <richard_t5@users.sourceforge.net>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef _INCLUDE_PALMT5_H_
-#define _INCLUDE_PALMT5_H_
-
-/** HERE ARE GPIOs **/
-
-/* GPIOs */
-#define GPIO_NR_PALMT5_GPIO_RESET		1
-
-#define GPIO_NR_PALMT5_POWER_DETECT		90
-#define GPIO_NR_PALMT5_HOTSYNC_BUTTON_N		10
-#define GPIO_NR_PALMT5_EARPHONE_DETECT		107
-
-/* SD/MMC */
-#define GPIO_NR_PALMT5_SD_DETECT_N		14
-#define GPIO_NR_PALMT5_SD_POWER			114
-#define GPIO_NR_PALMT5_SD_READONLY		115
-
-/* TOUCHSCREEN */
-#define GPIO_NR_PALMT5_WM9712_IRQ		27
-
-/* IRDA - disable GPIO connected to SD pin of tranceiver (TFBS4710?) ? */
-#define GPIO_NR_PALMT5_IR_DISABLE		40
-
-/* USB */
-#define GPIO_NR_PALMT5_USB_DETECT_N		15
-#define GPIO_NR_PALMT5_USB_PULLUP		93
-
-/* LCD/BACKLIGHT */
-#define GPIO_NR_PALMT5_BL_POWER			84
-#define GPIO_NR_PALMT5_LCD_POWER		96
-
-/* BLUETOOTH */
-#define GPIO_NR_PALMT5_BT_POWER			17
-#define GPIO_NR_PALMT5_BT_RESET			83
-
-/* INTERRUPTS */
-#define IRQ_GPIO_PALMT5_SD_DETECT_N	PXA_GPIO_TO_IRQ(GPIO_NR_PALMT5_SD_DETECT_N)
-#define IRQ_GPIO_PALMT5_WM9712_IRQ	PXA_GPIO_TO_IRQ(GPIO_NR_PALMT5_WM9712_IRQ)
-#define IRQ_GPIO_PALMT5_USB_DETECT	PXA_GPIO_TO_IRQ(GPIO_NR_PALMT5_USB_DETECT)
-#define IRQ_GPIO_PALMT5_GPIO_RESET	PXA_GPIO_TO_IRQ(GPIO_NR_PALMT5_GPIO_RESET)
-
-/** HERE ARE INIT VALUES **/
-
-/* Various addresses  */
-#define PALMT5_PHYS_RAM_START	0xa0000000
-#define PALMT5_PHYS_IO_START	0x40000000
-#define PALMT5_STR_BASE		0xa0200000
-
-/* TOUCHSCREEN */
-#define AC97_LINK_FRAME		21
-
-/* BATTERY */
-#define PALMT5_BAT_MAX_VOLTAGE		4000	/* 4.00v current voltage */
-#define PALMT5_BAT_MIN_VOLTAGE		3550	/* 3.55v critical voltage */
-#define PALMT5_BAT_MAX_CURRENT		0	/* unknown */
-#define PALMT5_BAT_MIN_CURRENT		0	/* unknown */
-#define PALMT5_BAT_MAX_CHARGE		1	/* unknown */
-#define PALMT5_BAT_MIN_CHARGE		1	/* unknown */
-#define PALMT5_MAX_LIFE_MINS		360    /* on-life in minutes */
-
-#define PALMT5_BAT_MEASURE_DELAY	(HZ * 1)
-
-/* BACKLIGHT */
-#define PALMT5_MAX_INTENSITY		0xFE
-#define PALMT5_DEFAULT_INTENSITY	0x7E
-#define PALMT5_LIMIT_MASK		0x7F
-#define PALMT5_PRESCALER		0x3F
-#define PALMT5_PERIOD_NS		3500
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/palmtc.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/palmtc.h
deleted file mode 100644
index c383a216..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/palmtc.h
+++ /dev/null
@@ -1,86 +0,0 @@
-/*
- * linux/include/asm-arm/arch-pxa/palmtc-gpio.h
- *
- * GPIOs and interrupts for Palm Tungsten|C Handheld Computer
- *
- * Authors:	Alex Osborne <bobofdoom@gmail.com>
- *		Marek Vasut <marek.vasut@gmail.com>
- *		Holger Bocklet <bitz.email@gmx.net>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef _INCLUDE_PALMTC_H_
-#define _INCLUDE_PALMTC_H_
-
-/** HERE ARE GPIOs **/
-
-/* GPIOs */
-#define GPIO_NR_PALMTC_EARPHONE_DETECT	2
-#define GPIO_NR_PALMTC_CRADLE_DETECT	5
-#define GPIO_NR_PALMTC_HOTSYNC_BUTTON	7
-
-/* SD/MMC */
-#define GPIO_NR_PALMTC_SD_DETECT_N	12
-#define GPIO_NR_PALMTC_SD_POWER		32
-#define GPIO_NR_PALMTC_SD_READONLY	54
-
-/* WLAN */
-#define GPIO_NR_PALMTC_PCMCIA_READY	13
-#define GPIO_NR_PALMTC_PCMCIA_PWRREADY	14
-#define GPIO_NR_PALMTC_PCMCIA_POWER1	15
-#define GPIO_NR_PALMTC_PCMCIA_POWER2	33
-#define GPIO_NR_PALMTC_PCMCIA_POWER3	55
-#define GPIO_NR_PALMTC_PCMCIA_RESET	78
-
-/* UDC */
-#define GPIO_NR_PALMTC_USB_DETECT_N	4
-#define GPIO_NR_PALMTC_USB_POWER	36
-
-/* LCD/BACKLIGHT */
-#define GPIO_NR_PALMTC_BL_POWER		16
-#define GPIO_NR_PALMTC_LCD_POWER	44
-#define GPIO_NR_PALMTC_LCD_BLANK	38
-
-/* UART */
-#define GPIO_NR_PALMTC_RS232_POWER	37
-
-/* IRDA */
-#define GPIO_NR_PALMTC_IR_DISABLE	45
-
-/* IRQs */
-#define IRQ_GPIO_PALMTC_SD_DETECT_N	PXA_GPIO_TO_IRQ(GPIO_NR_PALMTC_SD_DETECT_N)
-#define IRQ_GPIO_PALMTC_WLAN_READY	PXA_GPIO_TO_IRQ(GPIO_NR_PALMTC_WLAN_READY)
-
-/* UCB1400 GPIOs */
-#define GPIO_NR_PALMTC_POWER_DETECT	(0x80 | 0x00)
-#define GPIO_NR_PALMTC_HEADPHONE_DETECT	(0x80 | 0x01)
-#define GPIO_NR_PALMTC_SPEAKER_ENABLE	(0x80 | 0x03)
-#define GPIO_NR_PALMTC_VIBRA_POWER	(0x80 | 0x05)
-#define GPIO_NR_PALMTC_LED_POWER	(0x80 | 0x07)
-
-/** HERE ARE INIT VALUES **/
-#define PALMTC_UCB1400_GPIO_OFFSET	0x80
-
-/* BATTERY */
-#define PALMTC_BAT_MAX_VOLTAGE		4000	/* 4.00V maximum voltage */
-#define PALMTC_BAT_MIN_VOLTAGE		3550	/* 3.55V critical voltage */
-#define PALMTC_BAT_MAX_CURRENT		0	/* unknown */
-#define PALMTC_BAT_MIN_CURRENT		0	/* unknown */
-#define PALMTC_BAT_MAX_CHARGE		1	/* unknown */
-#define PALMTC_BAT_MIN_CHARGE		1	/* unknown */
-#define PALMTC_MAX_LIFE_MINS		240	/* on-life in minutes */
-
-#define PALMTC_BAT_MEASURE_DELAY	(HZ * 1)
-
-/* BACKLIGHT */
-#define PALMTC_MAX_INTENSITY		0xFE
-#define PALMTC_DEFAULT_INTENSITY	0x7E
-#define PALMTC_LIMIT_MASK		0x7F
-#define PALMTC_PRESCALER		0x3F
-#define PALMTC_PERIOD_NS		3500
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/palmte2.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/palmte2.h
deleted file mode 100644
index f89e989a..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/palmte2.h
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * GPIOs and interrupts for Palm Tungsten|E2 Handheld Computer
- *
- * Author:
- *		Carlos Eduardo Medaglia Dyonisio <cadu@nerdfeliz.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef _INCLUDE_PALMTE2_H_
-#define _INCLUDE_PALMTE2_H_
-
-/** HERE ARE GPIOs **/
-
-/* GPIOs */
-#define GPIO_NR_PALMTE2_POWER_DETECT		9
-#define GPIO_NR_PALMTE2_HOTSYNC_BUTTON_N	4
-#define GPIO_NR_PALMTE2_EARPHONE_DETECT		15
-
-/* SD/MMC */
-#define GPIO_NR_PALMTE2_SD_DETECT_N		10
-#define GPIO_NR_PALMTE2_SD_POWER		55
-#define GPIO_NR_PALMTE2_SD_READONLY		51
-
-/* IRDA -  disable GPIO connected to SD pin of tranceiver (TFBS4710?) ? */
-#define GPIO_NR_PALMTE2_IR_DISABLE		48
-
-/* USB */
-#define GPIO_NR_PALMTE2_USB_DETECT_N		35
-#define GPIO_NR_PALMTE2_USB_PULLUP		53
-
-/* LCD/BACKLIGHT */
-#define GPIO_NR_PALMTE2_BL_POWER		56
-#define GPIO_NR_PALMTE2_LCD_POWER		37
-
-/* KEYS */
-#define GPIO_NR_PALMTE2_KEY_NOTES	5
-#define GPIO_NR_PALMTE2_KEY_TASKS	7
-#define GPIO_NR_PALMTE2_KEY_CALENDAR	11
-#define GPIO_NR_PALMTE2_KEY_CONTACTS	13
-#define GPIO_NR_PALMTE2_KEY_CENTER	14
-#define GPIO_NR_PALMTE2_KEY_LEFT	19
-#define GPIO_NR_PALMTE2_KEY_RIGHT	20
-#define GPIO_NR_PALMTE2_KEY_DOWN	21
-#define GPIO_NR_PALMTE2_KEY_UP		22
-
-/** HERE ARE INIT VALUES **/
-
-/* BACKLIGHT */
-#define PALMTE2_MAX_INTENSITY		0xFE
-#define PALMTE2_DEFAULT_INTENSITY	0x7E
-#define PALMTE2_LIMIT_MASK		0x7F
-#define PALMTE2_PRESCALER		0x3F
-#define PALMTE2_PERIOD_NS		3500
-
-/* BATTERY */
-#define PALMTE2_BAT_MAX_VOLTAGE		4000	/* 4.00v current voltage */
-#define PALMTE2_BAT_MIN_VOLTAGE		3550	/* 3.55v critical voltage */
-#define PALMTE2_BAT_MAX_CURRENT		0	/* unknown */
-#define PALMTE2_BAT_MIN_CURRENT		0	/* unknown */
-#define PALMTE2_BAT_MAX_CHARGE		1	/* unknown */
-#define PALMTE2_BAT_MIN_CHARGE		1	/* unknown */
-#define PALMTE2_MAX_LIFE_MINS		360	/* on-life in minutes */
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/palmtreo.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/palmtreo.h
deleted file mode 100644
index 2d3f14e3..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/palmtreo.h
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * GPIOs and interrupts for Palm Treo smartphones
- *
- * currently supported:
- *     Palm Treo 680 (GSM)
- *     Palm Centro 685 (GSM)
- *
- * Author:     Tomas Cech <sleep_walker@suse.cz>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * find more info at www.hackndev.com
- *
- */
-
-#ifndef _INCLUDE_TREO_H_
-#define _INCLUDE_TREO_H_
-
-/* GPIOs */
-#define GPIO_NR_TREO_POWER_DETECT	0
-#define GPIO_NR_TREO_AMP_EN		27
-#define GPIO_NR_TREO_GREEN_LED	20
-#define GPIO_NR_TREO_RED_LED		79
-#define GPIO_NR_TREO_SD_DETECT_N	113
-#define GPIO_NR_TREO_EP_DETECT_N	116
-#define GPIO_NR_TREO_USB_DETECT	1
-#define GPIO_NR_TREO_USB_PULLUP	114
-#define GPIO_NR_TREO_GSM_POWER	40
-#define GPIO_NR_TREO_GSM_RESET	87
-#define GPIO_NR_TREO_GSM_WAKE	57
-#define GPIO_NR_TREO_GSM_HOST_WAKE	14
-#define GPIO_NR_TREO_GSM_TRIGGER	10
-#define GPIO_NR_TREO_IR_EN		115
-#define GPIO_NR_TREO_IR_TXD		47
-#define GPIO_NR_TREO_BL_POWER	38
-#define GPIO_NR_TREO_LCD_POWER	25
-
-/* Treo680 specific GPIOs */
-#ifdef CONFIG_MACH_TREO680
-#define GPIO_NR_TREO680_SD_READONLY	33
-#define GPIO_NR_TREO680_SD_POWER	42
-#define GPIO_NR_TREO680_VIBRATE_EN	44
-#define GPIO_NR_TREO680_KEYB_BL		24
-#define GPIO_NR_TREO680_BT_EN		43
-#endif /* CONFIG_MACH_TREO680 */
-
-/* Centro685 specific GPIOs */
-#define GPIO_NR_CENTRO_SD_POWER		21
-#define GPIO_NR_CENTRO_VIBRATE_EN	22
-#define GPIO_NR_CENTRO_KEYB_BL		33
-#define GPIO_NR_CENTRO_BT_EN		80
-
-/* Various addresses  */
-#define TREO_PHYS_RAM_START	0xa0000000
-#define TREO_PHYS_IO_START	0x40000000
-#define TREO_STR_BASE	0xa2000000
-
-/* BACKLIGHT */
-#define TREO_MAX_INTENSITY		254
-#define TREO_DEFAULT_INTENSITY	160
-#define TREO_LIMIT_MASK		0x7F
-#define TREO_PRESCALER		63
-#define TREO_PERIOD_NS		3500
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/palmtx.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/palmtx.h
deleted file mode 100644
index f2e53038..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/palmtx.h
+++ /dev/null
@@ -1,112 +0,0 @@
-/*
- * GPIOs and interrupts for Palm T|X Handheld Computer
- *
- * Based on palmld-gpio.h by Alex Osborne
- *
- * Authors:	Marek Vasut <marek.vasut@gmail.com>
- *		Cristiano P. <cristianop@users.sourceforge.net>
- *		Jan Herman <2hp@seznam.cz>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef _INCLUDE_PALMTX_H_
-#define _INCLUDE_PALMTX_H_
-
-/** HERE ARE GPIOs **/
-
-/* GPIOs */
-#define GPIO_NR_PALMTX_GPIO_RESET		1
-
-#define GPIO_NR_PALMTX_POWER_DETECT		12 /* 90 */
-#define GPIO_NR_PALMTX_HOTSYNC_BUTTON_N		10
-#define GPIO_NR_PALMTX_EARPHONE_DETECT		107
-
-/* SD/MMC */
-#define GPIO_NR_PALMTX_SD_DETECT_N		14
-#define GPIO_NR_PALMTX_SD_POWER			114 /* probably */
-#define GPIO_NR_PALMTX_SD_READONLY		115 /* probably */
-
-/* TOUCHSCREEN */
-#define GPIO_NR_PALMTX_WM9712_IRQ		27
-
-/* IRDA -  disable GPIO connected to SD pin of tranceiver (TFBS4710?) ? */
-#define GPIO_NR_PALMTX_IR_DISABLE		40
-
-/* USB */
-#define GPIO_NR_PALMTX_USB_DETECT_N		13
-#define GPIO_NR_PALMTX_USB_PULLUP		93
-
-/* LCD/BACKLIGHT */
-#define GPIO_NR_PALMTX_BL_POWER			84
-#define GPIO_NR_PALMTX_LCD_POWER		96
-
-/* LCD BORDER */
-#define GPIO_NR_PALMTX_BORDER_SWITCH		98
-#define GPIO_NR_PALMTX_BORDER_SELECT		22
-
-/* BLUETOOTH */
-#define GPIO_NR_PALMTX_BT_POWER			17
-#define GPIO_NR_PALMTX_BT_RESET			83
-
-/* PCMCIA (WiFi) */
-#define GPIO_NR_PALMTX_PCMCIA_POWER1		94
-#define GPIO_NR_PALMTX_PCMCIA_POWER2		108
-#define GPIO_NR_PALMTX_PCMCIA_RESET		79
-#define GPIO_NR_PALMTX_PCMCIA_READY		116
-
-/* NAND Flash ... this GPIO may be incorrect! */
-#define GPIO_NR_PALMTX_NAND_BUFFER_DIR		79
-
-/* INTERRUPTS */
-#define IRQ_GPIO_PALMTX_SD_DETECT_N	PXA_GPIO_TO_IRQ(GPIO_NR_PALMTX_SD_DETECT_N)
-#define IRQ_GPIO_PALMTX_WM9712_IRQ	PXA_GPIO_TO_IRQ(GPIO_NR_PALMTX_WM9712_IRQ)
-#define IRQ_GPIO_PALMTX_USB_DETECT	PXA_GPIO_TO_IRQ(GPIO_NR_PALMTX_USB_DETECT)
-#define IRQ_GPIO_PALMTX_GPIO_RESET	PXA_GPIO_TO_IRQ(GPIO_NR_PALMTX_GPIO_RESET)
-
-/** HERE ARE INIT VALUES **/
-
-/* Various addresses  */
-#define PALMTX_PCMCIA_PHYS	0x28000000
-#define PALMTX_PCMCIA_VIRT	IOMEM(0xf0000000)
-#define PALMTX_PCMCIA_SIZE	0x100000
-
-#define PALMTX_PHYS_RAM_START	0xa0000000
-#define PALMTX_PHYS_IO_START	0x40000000
-
-#define PALMTX_STR_BASE		0xa0200000
-
-#define PALMTX_PHYS_FLASH_START	PXA_CS0_PHYS	/* ChipSelect 0 */
-#define PALMTX_PHYS_NAND_START	PXA_CS1_PHYS	/* ChipSelect 1 */
-
-#define PALMTX_NAND_ALE_PHYS	(PALMTX_PHYS_NAND_START | (1 << 24))
-#define PALMTX_NAND_CLE_PHYS	(PALMTX_PHYS_NAND_START | (1 << 25))
-#define PALMTX_NAND_ALE_VIRT	IOMEM(0xff100000)
-#define PALMTX_NAND_CLE_VIRT	IOMEM(0xff200000)
-
-/* TOUCHSCREEN */
-#define AC97_LINK_FRAME			21
-
-
-/* BATTERY */
-#define PALMTX_BAT_MAX_VOLTAGE		4000	/* 4.00v current voltage */
-#define PALMTX_BAT_MIN_VOLTAGE		3550	/* 3.55v critical voltage */
-#define PALMTX_BAT_MAX_CURRENT		0	/* unknown */
-#define PALMTX_BAT_MIN_CURRENT		0	/* unknown */
-#define PALMTX_BAT_MAX_CHARGE		1	/* unknown */
-#define PALMTX_BAT_MIN_CHARGE		1	/* unknown */
-#define PALMTX_MAX_LIFE_MINS		360	/* on-life in minutes */
-
-#define PALMTX_BAT_MEASURE_DELAY	(HZ * 1)
-
-/* BACKLIGHT */
-#define PALMTX_MAX_INTENSITY		0xFE
-#define PALMTX_DEFAULT_INTENSITY	0x7E
-#define PALMTX_LIMIT_MASK		0x7F
-#define PALMTX_PRESCALER		0x3F
-#define PALMTX_PERIOD_NS		3500
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/palmz72.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/palmz72.h
deleted file mode 100644
index 0d4700a7..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/palmz72.h
+++ /dev/null
@@ -1,84 +0,0 @@
-/*
- * GPIOs and interrupts for Palm Zire72 Handheld Computer
- *
- * Authors:	Alex Osborne <bobofdoom@gmail.com>
- *		Jan Herman <2hp@seznam.cz>
- *		Sergey Lapin <slapin@ossfans.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef _INCLUDE_PALMZ72_H_
-#define _INCLUDE_PALMZ72_H_
-
-/* Power and control */
-#define GPIO_NR_PALMZ72_GPIO_RESET		1
-#define GPIO_NR_PALMZ72_POWER_DETECT		0
-
-/* SD/MMC */
-#define GPIO_NR_PALMZ72_SD_DETECT_N		14
-#define GPIO_NR_PALMZ72_SD_POWER_N		98
-#define GPIO_NR_PALMZ72_SD_RO			115
-
-/* Touchscreen */
-#define GPIO_NR_PALMZ72_WM9712_IRQ		27
-
-/* IRDA -  disable GPIO connected to SD pin of tranceiver (TFBS4710?) ? */
-#define GPIO_NR_PALMZ72_IR_DISABLE		49
-
-/* USB */
-#define GPIO_NR_PALMZ72_USB_DETECT_N		15
-#define GPIO_NR_PALMZ72_USB_PULLUP		95
-
-/* LCD/Backlight */
-#define GPIO_NR_PALMZ72_BL_POWER		20
-#define GPIO_NR_PALMZ72_LCD_POWER		96
-
-/* LED */
-#define GPIO_NR_PALMZ72_LED_GREEN		88
-
-/* Bluetooth */
-#define GPIO_NR_PALMZ72_BT_POWER		17
-#define GPIO_NR_PALMZ72_BT_RESET		83
-
-/* Camera */
-#define GPIO_NR_PALMZ72_CAM_PWDN		56
-#define GPIO_NR_PALMZ72_CAM_RESET		57
-#define GPIO_NR_PALMZ72_CAM_POWER		91
-
-/** Initial values **/
-
-/* Battery */
-#define PALMZ72_BAT_MAX_VOLTAGE		4000	/* 4.00v current voltage */
-#define PALMZ72_BAT_MIN_VOLTAGE		3550	/* 3.55v critical voltage */
-#define PALMZ72_BAT_MAX_CURRENT		0	/* unknown */
-#define PALMZ72_BAT_MIN_CURRENT		0	/* unknown */
-#define PALMZ72_BAT_MAX_CHARGE		1	/* unknown */
-#define PALMZ72_BAT_MIN_CHARGE		1	/* unknown */
-#define PALMZ72_MAX_LIFE_MINS		360	/* on-life in minutes */
-
-/* Backlight */
-#define PALMZ72_MAX_INTENSITY		0xFE
-#define PALMZ72_DEFAULT_INTENSITY	0x7E
-#define PALMZ72_LIMIT_MASK		0x7F
-#define PALMZ72_PRESCALER		0x3F
-#define PALMZ72_PERIOD_NS		3500
-
-#ifdef CONFIG_PM
-struct palmz72_resume_info {
-	u32 magic0;		/* 0x0 */
-	u32 magic1;		/* 0x4 */
-	u32 resume_addr;	/* 0x8 */
-	u32 pad[11];		/* 0xc..0x37 */
-	u32 arm_control;	/* 0x38 */
-	u32 aux_control;	/* 0x3c */
-	u32 ttb;		/* 0x40 */
-	u32 domain_access;	/* 0x44 */
-	u32 process_id;		/* 0x48 */
-};
-#endif
-#endif
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pata_pxa.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pata_pxa.h
deleted file mode 100644
index 6cf7df1d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pata_pxa.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * Generic PXA PATA driver
- *
- * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2, or (at your option)
- *  any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; see the file COPYING.  If not, write to
- *  the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef	__MACH_PATA_PXA_H__
-#define	__MACH_PATA_PXA_H__
-
-struct pata_pxa_pdata {
-	/* PXA DMA DREQ<0:2> pin */
-	uint32_t	dma_dreq;
-	/* Register shift */
-	uint32_t	reg_shift;
-	/* IRQ flags */
-	uint32_t	irq_flags;
-};
-
-#endif	/* __MACH_PATA_PXA_H__ */
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pcm027.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pcm027.h
deleted file mode 100644
index 6bf28de2..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pcm027.h
+++ /dev/null
@@ -1,84 +0,0 @@
-/*
- * arch/arm/mach-pxa/include/mach/pcm027.h
- *
- * (c) 2003 Phytec Messtechnik GmbH <armlinux@phytec.de>
- * (c) 2007 Juergen Beisert <j.beisert@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-/*
- * Definitions of CPU card resources only
- */
-
-/* phyCORE-PXA270 (PCM027) Interrupts */
-#define PCM027_IRQ(x)          (IRQ_BOARD_START + (x))
-#define PCM027_BTDET_IRQ       PCM027_IRQ(0)
-#define PCM027_FF_RI_IRQ       PCM027_IRQ(1)
-#define PCM027_MMCDET_IRQ      PCM027_IRQ(2)
-#define PCM027_PM_5V_IRQ       PCM027_IRQ(3)
-
-#define PCM027_NR_IRQS		(IRQ_BOARD_START + 32)
-
-/* I2C RTC */
-#define PCM027_RTC_IRQ_GPIO	0
-#define PCM027_RTC_IRQ		PXA_GPIO_TO_IRQ(PCM027_RTC_IRQ_GPIO)
-#define PCM027_RTC_IRQ_EDGE	IRQ_TYPE_EDGE_FALLING
-#define ADR_PCM027_RTC		0x51	/* I2C address */
-
-/* I2C EEPROM */
-#define ADR_PCM027_EEPROM	0x54	/* I2C address */
-
-/* Ethernet chip (SMSC91C111) */
-#define PCM027_ETH_IRQ_GPIO	52
-#define PCM027_ETH_IRQ		PXA_GPIO_TO_IRQ(PCM027_ETH_IRQ_GPIO)
-#define PCM027_ETH_IRQ_EDGE	IRQ_TYPE_EDGE_RISING
-#define PCM027_ETH_PHYS		PXA_CS5_PHYS
-#define PCM027_ETH_SIZE		(1*1024*1024)
-
-/* CAN controller SJA1000 (unsupported yet) */
-#define PCM027_CAN_IRQ_GPIO	114
-#define PCM027_CAN_IRQ		PXA_GPIO_TO_IRQ(PCM027_CAN_IRQ_GPIO)
-#define PCM027_CAN_IRQ_EDGE	IRQ_TYPE_EDGE_FALLING
-#define PCM027_CAN_PHYS		0x22000000
-#define PCM027_CAN_SIZE		0x100
-
-/* SPI GPIO expander (unsupported yet) */
-#define PCM027_EGPIO_IRQ_GPIO	27
-#define PCM027_EGPIO_IRQ	PXA_GPIO_TO_IRQ(PCM027_EGPIO_IRQ_GPIO)
-#define PCM027_EGPIO_IRQ_EDGE	IRQ_TYPE_EDGE_FALLING
-#define PCM027_EGPIO_CS		24
-/*
- * TODO: Switch this pin from dedicated usage to GPIO if
- * more than the MAX7301 device is connected to this SPI bus
- */
-#define PCM027_EGPIO_CS_MODE	GPIO24_SFRM_MD
-
-/* Flash memory */
-#define PCM027_FLASH_PHYS	0x00000000
-#define PCM027_FLASH_SIZE	0x02000000
-
-/* onboard LEDs connected to GPIO */
-#define PCM027_LED_CPU		90
-#define PCM027_LED_HEARD_BEAT	91
-
-/*
- * This CPU module needs a baseboard to work. After basic initializing
- * its own devices, it calls baseboard's init function.
- * TODO: Add your own basebaord init function and call it from
- * inside pcm027_init(). This example here is for the developmen board.
- * Refer pcm990-baseboard.c
- */
-extern void pcm990_baseboard_init(void);
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pcm990_baseboard.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pcm990_baseboard.h
deleted file mode 100644
index d7279169..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pcm990_baseboard.h
+++ /dev/null
@@ -1,275 +0,0 @@
-/*
- * arch/arm/mach-pxa/include/mach/pcm990_baseboard.h
- *
- * (c) 2003 Phytec Messtechnik GmbH <armlinux@phytec.de>
- * (c) 2007 Juergen Beisert <j.beisert@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <mach/pcm027.h>
-
-/*
- * definitions relevant only when the PCM-990
- * development base board is in use
- */
-
-/* CPLD's interrupt controller is connected to PCM-027 GPIO 9 */
-#define PCM990_CTRL_INT_IRQ_GPIO	9
-#define PCM990_CTRL_INT_IRQ		PXA_GPIO_TO_IRQ(PCM990_CTRL_INT_IRQ_GPIO)
-#define PCM990_CTRL_INT_IRQ_EDGE	IRQ_TYPE_EDGE_RISING
-#define PCM990_CTRL_PHYS		PXA_CS1_PHYS	/* 16-Bit */
-#define PCM990_CTRL_BASE		0xea000000
-#define PCM990_CTRL_SIZE		(1*1024*1024)
-
-#define PCM990_CTRL_PWR_IRQ_GPIO	14
-#define PCM990_CTRL_PWR_IRQ		PXA_GPIO_TO_IRQ(PCM990_CTRL_PWR_IRQ_GPIO)
-#define PCM990_CTRL_PWR_IRQ_EDGE	IRQ_TYPE_EDGE_RISING
-
-/* visible CPLD (U7) registers */
-#define PCM990_CTRL_REG0	0x0000	/* RESET REGISTER */
-#define PCM990_CTRL_SYSRES	0x0001	/* System RESET REGISTER */
-#define PCM990_CTRL_RESOUT	0x0002	/* RESETOUT Enable REGISTER */
-#define PCM990_CTRL_RESGPIO	0x0004	/* RESETGPIO Enable REGISTER */
-
-#define PCM990_CTRL_REG1	0x0002	/* Power REGISTER */
-#define PCM990_CTRL_5VOFF	0x0001	/* Disable  5V Regulators */
-#define PCM990_CTRL_CANPWR	0x0004	/* Enable CANPWR ADUM */
-#define PCM990_CTRL_PM_5V	0x0008	/* Read 5V OK */
-
-#define PCM990_CTRL_REG2	0x0004	/* LED REGISTER */
-#define PCM990_CTRL_LEDPWR	0x0001	/* POWER LED enable */
-#define PCM990_CTRL_LEDBAS	0x0002	/* BASIS LED enable */
-#define PCM990_CTRL_LEDUSR	0x0004	/* USER LED enable */
-
-#define PCM990_CTRL_REG3	0x0006	/* LCD CTRL REGISTER 3 */
-#define PCM990_CTRL_LCDPWR	0x0001	/* RW LCD Power on */
-#define PCM990_CTRL_LCDON	0x0002	/* RW LCD Latch on */
-#define PCM990_CTRL_LCDPOS1	0x0004	/* RW POS 1 */
-#define PCM990_CTRL_LCDPOS2	0x0008	/* RW POS 2 */
-
-#define PCM990_CTRL_REG4	0x0008	/* MMC1 CTRL REGISTER 4 */
-#define PCM990_CTRL_MMC1PWR	0x0001 /* RW MMC1 Power on */
-
-#define PCM990_CTRL_REG5	0x000A	/* MMC2 CTRL REGISTER 5 */
-#define PCM990_CTRL_MMC2PWR	0x0001	/* RW MMC2 Power on */
-#define PCM990_CTRL_MMC2LED	0x0002	/* RW MMC2 LED */
-#define PCM990_CTRL_MMC2DE	0x0004	/* R MMC2 Card detect */
-#define PCM990_CTRL_MMC2WP	0x0008	/* R MMC2 Card write protect */
-
-#define PCM990_CTRL_REG6	0x000C	/* Interrupt Clear REGISTER */
-#define PCM990_CTRL_INTC0	0x0001	/* Clear Reg BT Detect */
-#define PCM990_CTRL_INTC1	0x0002	/* Clear Reg FR RI */
-#define PCM990_CTRL_INTC2	0x0004	/* Clear Reg MMC1 Detect */
-#define PCM990_CTRL_INTC3	0x0008	/* Clear Reg PM_5V off */
-
-#define PCM990_CTRL_REG7	0x000E	/* Interrupt Enable REGISTER */
-#define PCM990_CTRL_ENAINT0	0x0001	/* Enable Int BT Detect */
-#define PCM990_CTRL_ENAINT1	0x0002	/* Enable Int FR RI */
-#define PCM990_CTRL_ENAINT2	0x0004	/* Enable Int MMC1 Detect */
-#define PCM990_CTRL_ENAINT3	0x0008	/* Enable Int PM_5V off */
-
-#define PCM990_CTRL_REG8	0x0014	/* Uart REGISTER */
-#define PCM990_CTRL_FFSD	0x0001	/* BT Uart Enable */
-#define PCM990_CTRL_BTSD	0x0002	/* FF Uart Enable */
-#define PCM990_CTRL_FFRI	0x0004	/* FF Uart RI detect */
-#define PCM990_CTRL_BTRX	0x0008	/* BT Uart Rx detect */
-
-#define PCM990_CTRL_REG9	0x0010	/* AC97 Flash REGISTER */
-#define PCM990_CTRL_FLWP	0x0001	/* pC Flash Write Protect */
-#define PCM990_CTRL_FLDIS	0x0002	/* pC Flash Disable */
-#define PCM990_CTRL_AC97ENA	0x0004	/* Enable AC97 Expansion */
-
-#define PCM990_CTRL_REG10	0x0012	/* GPS-REGISTER */
-#define PCM990_CTRL_GPSPWR	0x0004	/* GPS-Modul Power on */
-#define PCM990_CTRL_GPSENA	0x0008	/* GPS-Modul Enable */
-
-#define PCM990_CTRL_REG11	0x0014	/* Accu REGISTER */
-#define PCM990_CTRL_ACENA	0x0001	/* Charge Enable */
-#define PCM990_CTRL_ACSEL	0x0002	/* Charge Akku -> DC Enable */
-#define PCM990_CTRL_ACPRES	0x0004	/* DC Present */
-#define PCM990_CTRL_ACALARM	0x0008	/* Error Akku */
-
-#define PCM990_CTRL_P2V(x)	((x) - PCM990_CTRL_PHYS + PCM990_CTRL_BASE)
-#define PCM990_CTRL_V2P(x)	((x) - PCM990_CTRL_BASE + PCM990_CTRL_PHYS)
-
-#ifndef __ASSEMBLY__
-#  define __PCM990_CTRL_REG(x) \
-		(*((volatile unsigned char *)PCM990_CTRL_P2V(x)))
-#else
-#  define __PCM990_CTRL_REG(x)	PCM990_CTRL_P2V(x)
-#endif
-
-#define PCM990_INTMSKENA __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG7)
-#define PCM990_INTSETCLR __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG6)
-#define PCM990_CTRL0	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG0)
-#define PCM990_CTRL1	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG1)
-#define PCM990_CTRL2	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG2)
-#define PCM990_CTRL3	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG3)
-#define PCM990_CTRL4	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG4)
-#define PCM990_CTRL5	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG5)
-#define PCM990_CTRL6	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG6)
-#define PCM990_CTRL7	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG7)
-#define PCM990_CTRL8	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG8)
-#define PCM990_CTRL9	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG9)
-#define PCM990_CTRL10	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG10)
-#define PCM990_CTRL11	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG11)
-
-
-/*
- * IDE
- */
-#define PCM990_IDE_IRQ_GPIO	13
-#define PCM990_IDE_IRQ		PXA_GPIO_TO_IRQ(PCM990_IDE_IRQ_GPIO)
-#define PCM990_IDE_IRQ_EDGE	IRQ_TYPE_EDGE_RISING
-#define PCM990_IDE_PLD_PHYS	0x20000000	/* 16 bit wide */
-#define PCM990_IDE_PLD_BASE	0xee000000
-#define PCM990_IDE_PLD_SIZE	(1*1024*1024)
-
-/* visible CPLD (U6) registers */
-#define PCM990_IDE_PLD_REG0	0x1000	/* OFFSET IDE REGISTER 0 */
-#define PCM990_IDE_PM5V		0x0004	/* R System VCC_5V */
-#define PCM990_IDE_STBY		0x0008	/* R System StandBy */
-
-#define PCM990_IDE_PLD_REG1	0x1002	/* OFFSET IDE REGISTER 1 */
-#define PCM990_IDE_IDEMODE	0x0001	/* R TrueIDE Mode */
-#define PCM990_IDE_DMAENA	0x0004	/* RW DMA Enable */
-#define PCM990_IDE_DMA1_0	0x0008	/* RW 1=DREQ1 0=DREQ0 */
-
-#define PCM990_IDE_PLD_REG2	0x1004	/* OFFSET IDE REGISTER 2 */
-#define PCM990_IDE_RESENA	0x0001	/* RW IDE Reset Bit enable */
-#define PCM990_IDE_RES		0x0002	/* RW IDE Reset Bit */
-#define PCM990_IDE_RDY		0x0008	/* RDY */
-
-#define PCM990_IDE_PLD_REG3	0x1006	/* OFFSET IDE REGISTER 3 */
-#define PCM990_IDE_IDEOE	0x0001	/* RW Latch on Databus */
-#define PCM990_IDE_IDEON	0x0002	/* RW Latch on Control Address */
-#define PCM990_IDE_IDEIN	0x0004	/* RW Latch on Interrupt usw. */
-
-#define PCM990_IDE_PLD_REG4	0x1008	/* OFFSET IDE REGISTER 4 */
-#define PCM990_IDE_PWRENA	0x0001	/* RW IDE Power enable */
-#define PCM990_IDE_5V		0x0002	/* R IDE Power 5V */
-#define PCM990_IDE_PWG		0x0008	/* R IDE Power is on */
-
-#define PCM990_IDE_PLD_P2V(x) ((x) - PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_BASE)
-#define PCM990_IDE_PLD_V2P(x) ((x) - PCM990_IDE_PLD_BASE + PCM990_IDE_PLD_PHYS)
-
-#ifndef __ASSEMBLY__
-# define  __PCM990_IDE_PLD_REG(x) \
-	(*((volatile unsigned char *)PCM990_IDE_PLD_P2V(x)))
-#else
-# define  __PCM990_IDE_PLD_REG(x)	PCM990_IDE_PLD_P2V(x)
-#endif
-
-#define PCM990_IDE0 \
-	__PCM990_IDE_PLD_REG(PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_REG0)
-#define PCM990_IDE1 \
-	__PCM990_IDE_PLD_REG(PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_REG1)
-#define PCM990_IDE2 \
-	__PCM990_IDE_PLD_REG(PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_REG2)
-#define PCM990_IDE3 \
-	__PCM990_IDE_PLD_REG(PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_REG3)
-#define PCM990_IDE4 \
-	__PCM990_IDE_PLD_REG(PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_REG4)
-
-/*
- * Compact Flash
- */
-#define PCM990_CF_IRQ_GPIO	11
-#define PCM990_CF_IRQ		PXA_GPIO_TO_IRQ(PCM990_CF_IRQ_GPIO)
-#define PCM990_CF_IRQ_EDGE	IRQ_TYPE_EDGE_RISING
-
-#define PCM990_CF_CD_GPIO	12
-#define PCM990_CF_CD		PXA_GPIO_TO_IRQ(PCM990_CF_CD_GPIO)
-#define PCM990_CF_CD_EDGE	IRQ_TYPE_EDGE_RISING
-
-#define PCM990_CF_PLD_PHYS	0x30000000	/* 16 bit wide */
-#define PCM990_CF_PLD_BASE	0xef000000
-#define PCM990_CF_PLD_SIZE	(1*1024*1024)
-#define PCM990_CF_PLD_P2V(x)	((x) - PCM990_CF_PLD_PHYS + PCM990_CF_PLD_BASE)
-#define PCM990_CF_PLD_V2P(x)	((x) - PCM990_CF_PLD_BASE + PCM990_CF_PLD_PHYS)
-
-/* visible CPLD (U6) registers */
-#define PCM990_CF_PLD_REG0	0x1000	/* OFFSET CF REGISTER 0 */
-#define PCM990_CF_REG0_LED	0x0001	/* RW LED on */
-#define PCM990_CF_REG0_BLK	0x0002	/* RW LED flash when access */
-#define PCM990_CF_REG0_PM5V	0x0004	/* R System VCC_5V enable */
-#define PCM990_CF_REG0_STBY	0x0008	/* R System StandBy */
-
-#define PCM990_CF_PLD_REG1	0x1002	/* OFFSET CF REGISTER 1 */
-#define PCM990_CF_REG1_IDEMODE	0x0001	/* RW CF card run as TrueIDE */
-#define PCM990_CF_REG1_CF0	0x0002	/* RW CF card at ADDR 0x28000000 */
-
-#define PCM990_CF_PLD_REG2	0x1004	/* OFFSET CF REGISTER 2 */
-#define PCM990_CF_REG2_RES	0x0002	/* RW CF RESET BIT */
-#define PCM990_CF_REG2_RDYENA	0x0004	/* RW Enable CF_RDY */
-#define PCM990_CF_REG2_RDY	0x0008	/* R CF_RDY auf PWAIT */
-
-#define PCM990_CF_PLD_REG3	0x1006	/* OFFSET CF REGISTER 3 */
-#define PCM990_CF_REG3_CFOE	0x0001	/* RW Latch on Databus */
-#define PCM990_CF_REG3_CFON	0x0002	/* RW Latch on Control Address */
-#define PCM990_CF_REG3_CFIN	0x0004	/* RW Latch on Interrupt usw. */
-#define PCM990_CF_REG3_CFCD	0x0008	/* RW Latch on CD1/2 VS1/2 usw */
-
-#define PCM990_CF_PLD_REG4	0x1008	/* OFFSET CF REGISTER 4 */
-#define PCM990_CF_REG4_PWRENA	0x0001	/* RW CF Power on (CD1/2 = "00") */
-#define PCM990_CF_REG4_5_3V	0x0002	/* RW 1 = 5V CF_VCC 0 = 3 V CF_VCC */
-#define PCM990_CF_REG4_3B	0x0004	/* RW 3.0V Backup from VCC (5_3V=0) */
-#define PCM990_CF_REG4_PWG	0x0008	/* R CF-Power is on */
-
-#define PCM990_CF_PLD_REG5	0x100A	/* OFFSET CF REGISTER 5 */
-#define PCM990_CF_REG5_BVD1	0x0001	/* R CF /BVD1 */
-#define PCM990_CF_REG5_BVD2	0x0002	/* R CF /BVD2 */
-#define PCM990_CF_REG5_VS1	0x0004	/* R CF /VS1 */
-#define PCM990_CF_REG5_VS2	0x0008	/* R CF /VS2 */
-
-#define PCM990_CF_PLD_REG6	0x100C	/* OFFSET CF REGISTER 6 */
-#define PCM990_CF_REG6_CD1	0x0001	/* R CF Card_Detect1 */
-#define PCM990_CF_REG6_CD2	0x0002	/* R CF Card_Detect2 */
-
-#ifndef __ASSEMBLY__
-#  define  __PCM990_CF_PLD_REG(x) \
-	(*((volatile unsigned char *)PCM990_CF_PLD_P2V(x)))
-#else
-#  define  __PCM990_CF_PLD_REG(x)	PCM990_CF_PLD_P2V(x)
-#endif
-
-#define PCM990_CF0 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG0)
-#define PCM990_CF1 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG1)
-#define PCM990_CF2 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG2)
-#define PCM990_CF3 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG3)
-#define PCM990_CF4 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG4)
-#define PCM990_CF5 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG5)
-#define PCM990_CF6 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG6)
-
-/*
- * Wolfson AC97 Touch
- */
-#define PCM990_AC97_IRQ_GPIO	10
-#define PCM990_AC97_IRQ		PXA_GPIO_TO_IRQ(PCM990_AC97_IRQ_GPIO)
-#define PCM990_AC97_IRQ_EDGE	IRQ_TYPE_EDGE_RISING
-
-/*
- * MMC phyCORE
- */
-#define PCM990_MMC0_IRQ_GPIO	9
-#define PCM990_MMC0_IRQ		PXA_GPIO_TO_IRQ(PCM990_MMC0_IRQ_GPIO)
-#define PCM990_MMC0_IRQ_EDGE	IRQ_TYPE_EDGE_FALLING
-
-/*
- * USB phyCore
- */
-#define PCM990_USB_OVERCURRENT (88 | GPIO_ALT_FN_1_IN)
-#define PCM990_USB_PWR_EN (89 | GPIO_ALT_FN_2_OUT)
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pm.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pm.h
deleted file mode 100644
index 51558bce..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pm.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * Copyright (c) 2005 Richard Purdie
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/suspend.h>
-
-struct pxa_cpu_pm_fns {
-	int	save_count;
-	void	(*save)(unsigned long *);
-	void	(*restore)(unsigned long *);
-	int	(*valid)(suspend_state_t state);
-	void	(*enter)(suspend_state_t state);
-	int	(*prepare)(void);
-	void	(*finish)(void);
-};
-
-extern struct pxa_cpu_pm_fns *pxa_cpu_pm_fns;
-
-/* sleep.S */
-extern int pxa25x_finish_suspend(unsigned long);
-extern int pxa27x_finish_suspend(unsigned long);
-
-extern int pxa_pm_enter(suspend_state_t state);
-extern int pxa_pm_prepare(void);
-extern void pxa_pm_finish(void);
-
-/* NOTE: this is for PM debugging on Lubbock,  it's really a big
- * ugly, but let's keep the crap minimum here, instead of direct
- * accessing the LUBBOCK CPLD registers in arch/arm/mach-pxa/pm.c
- */
-#ifdef CONFIG_ARCH_LUBBOCK
-extern void lubbock_set_hexled(uint32_t value);
-#else
-#define lubbock_set_hexled(x)
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/poodle.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/poodle.h
deleted file mode 100644
index f32ff75d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/poodle.h
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
- * arch/arm/mach-pxa/include/mach/poodle.h
- *
- * May be copied or modified under the terms of the GNU General Public
- * License.  See linux/COPYING for more information.
- *
- * Based on:
- *   arch/arm/mach-sa1100/include/mach/collie.h
- *
- * ChangeLog:
- *   04-06-2001 Lineo Japan, Inc.
- *   04-16-2001 SHARP Corporation
- *   Update to 2.6 John Lenz
- */
-#ifndef __ASM_ARCH_POODLE_H
-#define __ASM_ARCH_POODLE_H  1
-
-/*
- * GPIOs
- */
-/* PXA GPIOs */
-#define POODLE_GPIO_ON_KEY		(0)
-#define POODLE_GPIO_AC_IN		(1)
-#define POODLE_GPIO_CO			16
-#define POODLE_GPIO_TP_INT		(5)
-#define POODLE_GPIO_TP_CS		(24)
-#define POODLE_GPIO_WAKEUP		(11)	/* change battery */
-#define POODLE_GPIO_GA_INT		(10)
-#define POODLE_GPIO_IR_ON		(22)
-#define POODLE_GPIO_HP_IN		(4)
-#define POODLE_GPIO_CF_IRQ		(17)
-#define POODLE_GPIO_CF_CD		(14)
-#define POODLE_GPIO_CF_STSCHG		(14)
-#define POODLE_GPIO_SD_PWR		(33)
-#define POODLE_GPIO_SD_PWR1		(3)
-#define POODLE_GPIO_nSD_CLK		(6)
-#define POODLE_GPIO_nSD_WP		(7)
-#define POODLE_GPIO_nSD_INT		(8)
-#define POODLE_GPIO_nSD_DETECT		(9)
-#define POODLE_GPIO_MAIN_BAT_LOW	(13)
-#define POODLE_GPIO_BAT_COVER		(13)
-#define POODLE_GPIO_USB_PULLUP		(20)
-#define POODLE_GPIO_ADC_TEMP_ON		(21)
-#define POODLE_GPIO_BYPASS_ON		(36)
-#define POODLE_GPIO_CHRG_ON		(38)
-#define POODLE_GPIO_CHRG_FULL		(16)
-#define POODLE_GPIO_DISCHARGE_ON        (42) /* Enable battery discharge */
-
-/* PXA GPIOs */
-#define POODLE_IRQ_GPIO_ON_KEY		PXA_GPIO_TO_IRQ(0)
-#define POODLE_IRQ_GPIO_AC_IN		PXA_GPIO_TO_IRQ(1)
-#define POODLE_IRQ_GPIO_HP_IN		PXA_GPIO_TO_IRQ(4)
-#define POODLE_IRQ_GPIO_CO		PXA_GPIO_TO_IRQ(16)
-#define POODLE_IRQ_GPIO_TP_INT		PXA_GPIO_TO_IRQ(5)
-#define POODLE_IRQ_GPIO_WAKEUP		PXA_GPIO_TO_IRQ(11)
-#define POODLE_IRQ_GPIO_GA_INT		PXA_GPIO_TO_IRQ(10)
-#define POODLE_IRQ_GPIO_CF_IRQ		PXA_GPIO_TO_IRQ(17)
-#define POODLE_IRQ_GPIO_CF_CD		PXA_GPIO_TO_IRQ(14)
-#define POODLE_IRQ_GPIO_nSD_INT		PXA_GPIO_TO_IRQ(8)
-#define POODLE_IRQ_GPIO_nSD_DETECT	PXA_GPIO_TO_IRQ(9)
-#define POODLE_IRQ_GPIO_MAIN_BAT_LOW	PXA_GPIO_TO_IRQ(13)
-
-/* SCOOP GPIOs */
-#define POODLE_SCOOP_CHARGE_ON	SCOOP_GPCR_PA11
-#define POODLE_SCOOP_CP401	SCOOP_GPCR_PA13
-#define POODLE_SCOOP_VPEN	SCOOP_GPCR_PA18
-#define POODLE_SCOOP_L_PCLK	SCOOP_GPCR_PA20
-#define POODLE_SCOOP_L_LCLK	SCOOP_GPCR_PA21
-#define POODLE_SCOOP_HS_OUT	SCOOP_GPCR_PA22
-
-#define POODLE_SCOOP_IO_DIR	( POODLE_SCOOP_VPEN | POODLE_SCOOP_HS_OUT )
-#define POODLE_SCOOP_IO_OUT	( 0 )
-
-#define POODLE_SCOOP_GPIO_BASE	(PXA_NR_BUILTIN_GPIO)
-#define POODLE_GPIO_CHARGE_ON	(POODLE_SCOOP_GPIO_BASE + 0)
-#define POODLE_GPIO_CP401	(POODLE_SCOOP_GPIO_BASE + 2)
-#define POODLE_GPIO_VPEN	(POODLE_SCOOP_GPIO_BASE + 7)
-#define POODLE_GPIO_L_PCLK	(POODLE_SCOOP_GPIO_BASE + 9)
-#define POODLE_GPIO_L_LCLK	(POODLE_SCOOP_GPIO_BASE + 10)
-#define POODLE_GPIO_HS_OUT	(POODLE_SCOOP_GPIO_BASE + 11)
-
-#define POODLE_LOCOMO_GPIO_AMP_ON      LOCOMO_GPIO(8)
-#define POODLE_LOCOMO_GPIO_MUTE_L      LOCOMO_GPIO(10)
-#define POODLE_LOCOMO_GPIO_MUTE_R      LOCOMO_GPIO(11)
-#define POODLE_LOCOMO_GPIO_232VCC_ON   LOCOMO_GPIO(12)
-#define POODLE_LOCOMO_GPIO_JK_B        LOCOMO_GPIO(13)
-
-#define POODLE_NR_IRQS		(IRQ_BOARD_START + 4)	/* 4 for LoCoMo */
-
-extern struct platform_device poodle_locomo_device;
-
-#endif /* __ASM_ARCH_POODLE_H  */
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pxa25x-udc.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pxa25x-udc.h
deleted file mode 100644
index 1b80a480..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pxa25x-udc.h
+++ /dev/null
@@ -1,163 +0,0 @@
-#ifndef _ASM_ARCH_PXA25X_UDC_H
-#define _ASM_ARCH_PXA25X_UDC_H
-
-#ifdef _ASM_ARCH_PXA27X_UDC_H
-#error "You can't include both PXA25x and PXA27x UDC support"
-#endif
-
-#define UDC_RES1	__REG(0x40600004)  /* UDC Undocumented - Reserved1 */
-#define UDC_RES2	__REG(0x40600008)  /* UDC Undocumented - Reserved2 */
-#define UDC_RES3	__REG(0x4060000C)  /* UDC Undocumented - Reserved3 */
-
-#define UDCCR		__REG(0x40600000)  /* UDC Control Register */
-#define UDCCR_UDE	(1 << 0)	/* UDC enable */
-#define UDCCR_UDA	(1 << 1)	/* UDC active */
-#define UDCCR_RSM	(1 << 2)	/* Device resume */
-#define UDCCR_RESIR	(1 << 3)	/* Resume interrupt request */
-#define UDCCR_SUSIR	(1 << 4)	/* Suspend interrupt request */
-#define UDCCR_SRM	(1 << 5)	/* Suspend/resume interrupt mask */
-#define UDCCR_RSTIR	(1 << 6)	/* Reset interrupt request */
-#define UDCCR_REM	(1 << 7)	/* Reset interrupt mask */
-
-#define UDCCS0		__REG(0x40600010)  /* UDC Endpoint 0 Control/Status Register */
-#define UDCCS0_OPR	(1 << 0)	/* OUT packet ready */
-#define UDCCS0_IPR	(1 << 1)	/* IN packet ready */
-#define UDCCS0_FTF	(1 << 2)	/* Flush Tx FIFO */
-#define UDCCS0_DRWF	(1 << 3)	/* Device remote wakeup feature */
-#define UDCCS0_SST	(1 << 4)	/* Sent stall */
-#define UDCCS0_FST	(1 << 5)	/* Force stall */
-#define UDCCS0_RNE	(1 << 6)	/* Receive FIFO no empty */
-#define UDCCS0_SA	(1 << 7)	/* Setup active */
-
-/* Bulk IN - Endpoint 1,6,11 */
-#define UDCCS1		__REG(0x40600014)  /* UDC Endpoint 1 (IN) Control/Status Register */
-#define UDCCS6		__REG(0x40600028)  /* UDC Endpoint 6 (IN) Control/Status Register */
-#define UDCCS11		__REG(0x4060003C)  /* UDC Endpoint 11 (IN) Control/Status Register */
-
-#define UDCCS_BI_TFS	(1 << 0)	/* Transmit FIFO service */
-#define UDCCS_BI_TPC	(1 << 1)	/* Transmit packet complete */
-#define UDCCS_BI_FTF	(1 << 2)	/* Flush Tx FIFO */
-#define UDCCS_BI_TUR	(1 << 3)	/* Transmit FIFO underrun */
-#define UDCCS_BI_SST	(1 << 4)	/* Sent stall */
-#define UDCCS_BI_FST	(1 << 5)	/* Force stall */
-#define UDCCS_BI_TSP	(1 << 7)	/* Transmit short packet */
-
-/* Bulk OUT - Endpoint 2,7,12 */
-#define UDCCS2		__REG(0x40600018)  /* UDC Endpoint 2 (OUT) Control/Status Register */
-#define UDCCS7		__REG(0x4060002C)  /* UDC Endpoint 7 (OUT) Control/Status Register */
-#define UDCCS12		__REG(0x40600040)  /* UDC Endpoint 12 (OUT) Control/Status Register */
-
-#define UDCCS_BO_RFS	(1 << 0)	/* Receive FIFO service */
-#define UDCCS_BO_RPC	(1 << 1)	/* Receive packet complete */
-#define UDCCS_BO_DME	(1 << 3)	/* DMA enable */
-#define UDCCS_BO_SST	(1 << 4)	/* Sent stall */
-#define UDCCS_BO_FST	(1 << 5)	/* Force stall */
-#define UDCCS_BO_RNE	(1 << 6)	/* Receive FIFO not empty */
-#define UDCCS_BO_RSP	(1 << 7)	/* Receive short packet */
-
-/* Isochronous IN - Endpoint 3,8,13 */
-#define UDCCS3		__REG(0x4060001C)  /* UDC Endpoint 3 (IN) Control/Status Register */
-#define UDCCS8		__REG(0x40600030)  /* UDC Endpoint 8 (IN) Control/Status Register */
-#define UDCCS13		__REG(0x40600044)  /* UDC Endpoint 13 (IN) Control/Status Register */
-
-#define UDCCS_II_TFS	(1 << 0)	/* Transmit FIFO service */
-#define UDCCS_II_TPC	(1 << 1)	/* Transmit packet complete */
-#define UDCCS_II_FTF	(1 << 2)	/* Flush Tx FIFO */
-#define UDCCS_II_TUR	(1 << 3)	/* Transmit FIFO underrun */
-#define UDCCS_II_TSP	(1 << 7)	/* Transmit short packet */
-
-/* Isochronous OUT - Endpoint 4,9,14 */
-#define UDCCS4		__REG(0x40600020)  /* UDC Endpoint 4 (OUT) Control/Status Register */
-#define UDCCS9		__REG(0x40600034)  /* UDC Endpoint 9 (OUT) Control/Status Register */
-#define UDCCS14		__REG(0x40600048)  /* UDC Endpoint 14 (OUT) Control/Status Register */
-
-#define UDCCS_IO_RFS	(1 << 0)	/* Receive FIFO service */
-#define UDCCS_IO_RPC	(1 << 1)	/* Receive packet complete */
-#define UDCCS_IO_ROF	(1 << 2)	/* Receive overflow */
-#define UDCCS_IO_DME	(1 << 3)	/* DMA enable */
-#define UDCCS_IO_RNE	(1 << 6)	/* Receive FIFO not empty */
-#define UDCCS_IO_RSP	(1 << 7)	/* Receive short packet */
-
-/* Interrupt IN - Endpoint 5,10,15 */
-#define UDCCS5		__REG(0x40600024)  /* UDC Endpoint 5 (Interrupt) Control/Status Register */
-#define UDCCS10		__REG(0x40600038)  /* UDC Endpoint 10 (Interrupt) Control/Status Register */
-#define UDCCS15		__REG(0x4060004C)  /* UDC Endpoint 15 (Interrupt) Control/Status Register */
-
-#define UDCCS_INT_TFS	(1 << 0)	/* Transmit FIFO service */
-#define UDCCS_INT_TPC	(1 << 1)	/* Transmit packet complete */
-#define UDCCS_INT_FTF	(1 << 2)	/* Flush Tx FIFO */
-#define UDCCS_INT_TUR	(1 << 3)	/* Transmit FIFO underrun */
-#define UDCCS_INT_SST	(1 << 4)	/* Sent stall */
-#define UDCCS_INT_FST	(1 << 5)	/* Force stall */
-#define UDCCS_INT_TSP	(1 << 7)	/* Transmit short packet */
-
-#define UFNRH		__REG(0x40600060)  /* UDC Frame Number Register High */
-#define UFNRL		__REG(0x40600064)  /* UDC Frame Number Register Low */
-#define UBCR2		__REG(0x40600068)  /* UDC Byte Count Reg 2 */
-#define UBCR4		__REG(0x4060006c)  /* UDC Byte Count Reg 4 */
-#define UBCR7		__REG(0x40600070)  /* UDC Byte Count Reg 7 */
-#define UBCR9		__REG(0x40600074)  /* UDC Byte Count Reg 9 */
-#define UBCR12		__REG(0x40600078)  /* UDC Byte Count Reg 12 */
-#define UBCR14		__REG(0x4060007c)  /* UDC Byte Count Reg 14 */
-#define UDDR0		__REG(0x40600080)  /* UDC Endpoint 0 Data Register */
-#define UDDR1		__REG(0x40600100)  /* UDC Endpoint 1 Data Register */
-#define UDDR2		__REG(0x40600180)  /* UDC Endpoint 2 Data Register */
-#define UDDR3		__REG(0x40600200)  /* UDC Endpoint 3 Data Register */
-#define UDDR4		__REG(0x40600400)  /* UDC Endpoint 4 Data Register */
-#define UDDR5		__REG(0x406000A0)  /* UDC Endpoint 5 Data Register */
-#define UDDR6		__REG(0x40600600)  /* UDC Endpoint 6 Data Register */
-#define UDDR7		__REG(0x40600680)  /* UDC Endpoint 7 Data Register */
-#define UDDR8		__REG(0x40600700)  /* UDC Endpoint 8 Data Register */
-#define UDDR9		__REG(0x40600900)  /* UDC Endpoint 9 Data Register */
-#define UDDR10		__REG(0x406000C0)  /* UDC Endpoint 10 Data Register */
-#define UDDR11		__REG(0x40600B00)  /* UDC Endpoint 11 Data Register */
-#define UDDR12		__REG(0x40600B80)  /* UDC Endpoint 12 Data Register */
-#define UDDR13		__REG(0x40600C00)  /* UDC Endpoint 13 Data Register */
-#define UDDR14		__REG(0x40600E00)  /* UDC Endpoint 14 Data Register */
-#define UDDR15		__REG(0x406000E0)  /* UDC Endpoint 15 Data Register */
-
-#define UICR0		__REG(0x40600050)  /* UDC Interrupt Control Register 0 */
-
-#define UICR0_IM0	(1 << 0)	/* Interrupt mask ep 0 */
-#define UICR0_IM1	(1 << 1)	/* Interrupt mask ep 1 */
-#define UICR0_IM2	(1 << 2)	/* Interrupt mask ep 2 */
-#define UICR0_IM3	(1 << 3)	/* Interrupt mask ep 3 */
-#define UICR0_IM4	(1 << 4)	/* Interrupt mask ep 4 */
-#define UICR0_IM5	(1 << 5)	/* Interrupt mask ep 5 */
-#define UICR0_IM6	(1 << 6)	/* Interrupt mask ep 6 */
-#define UICR0_IM7	(1 << 7)	/* Interrupt mask ep 7 */
-
-#define UICR1		__REG(0x40600054)  /* UDC Interrupt Control Register 1 */
-
-#define UICR1_IM8	(1 << 0)	/* Interrupt mask ep 8 */
-#define UICR1_IM9	(1 << 1)	/* Interrupt mask ep 9 */
-#define UICR1_IM10	(1 << 2)	/* Interrupt mask ep 10 */
-#define UICR1_IM11	(1 << 3)	/* Interrupt mask ep 11 */
-#define UICR1_IM12	(1 << 4)	/* Interrupt mask ep 12 */
-#define UICR1_IM13	(1 << 5)	/* Interrupt mask ep 13 */
-#define UICR1_IM14	(1 << 6)	/* Interrupt mask ep 14 */
-#define UICR1_IM15	(1 << 7)	/* Interrupt mask ep 15 */
-
-#define USIR0		__REG(0x40600058)  /* UDC Status Interrupt Register 0 */
-
-#define USIR0_IR0	(1 << 0)	/* Interrupt request ep 0 */
-#define USIR0_IR1	(1 << 1)	/* Interrupt request ep 1 */
-#define USIR0_IR2	(1 << 2)	/* Interrupt request ep 2 */
-#define USIR0_IR3	(1 << 3)	/* Interrupt request ep 3 */
-#define USIR0_IR4	(1 << 4)	/* Interrupt request ep 4 */
-#define USIR0_IR5	(1 << 5)	/* Interrupt request ep 5 */
-#define USIR0_IR6	(1 << 6)	/* Interrupt request ep 6 */
-#define USIR0_IR7	(1 << 7)	/* Interrupt request ep 7 */
-
-#define USIR1		__REG(0x4060005C)  /* UDC Status Interrupt Register 1 */
-
-#define USIR1_IR8	(1 << 0)	/* Interrupt request ep 8 */
-#define USIR1_IR9	(1 << 1)	/* Interrupt request ep 9 */
-#define USIR1_IR10	(1 << 2)	/* Interrupt request ep 10 */
-#define USIR1_IR11	(1 << 3)	/* Interrupt request ep 11 */
-#define USIR1_IR12	(1 << 4)	/* Interrupt request ep 12 */
-#define USIR1_IR13	(1 << 5)	/* Interrupt request ep 13 */
-#define USIR1_IR14	(1 << 6)	/* Interrupt request ep 14 */
-#define USIR1_IR15	(1 << 7)	/* Interrupt request ep 15 */
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pxa25x.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pxa25x.h
deleted file mode 100644
index 3ac0baac..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pxa25x.h
+++ /dev/null
@@ -1,17 +0,0 @@
-#ifndef __MACH_PXA25x_H
-#define __MACH_PXA25x_H
-
-#include <mach/hardware.h>
-#include <mach/pxa2xx-regs.h>
-#include <mach/mfp-pxa25x.h>
-#include <mach/irqs.h>
-
-extern void __init pxa25x_map_io(void);
-extern void __init pxa25x_init_irq(void);
-#ifdef CONFIG_CPU_PXA26x
-extern void __init pxa26x_init_irq(void);
-#endif
-
-#define pxa25x_handle_irq	icip_handle_irq
-
-#endif /* __MACH_PXA25x_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pxa27x-udc.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pxa27x-udc.h
deleted file mode 100644
index 4cf28f67..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pxa27x-udc.h
+++ /dev/null
@@ -1,257 +0,0 @@
-#ifndef _ASM_ARCH_PXA27X_UDC_H
-#define _ASM_ARCH_PXA27X_UDC_H
-
-#ifdef _ASM_ARCH_PXA25X_UDC_H
-#error You cannot include both PXA25x and PXA27x UDC support
-#endif
-
-#define UDCCR           __REG(0x40600000) /* UDC Control Register */
-#define UDCCR_OEN	(1 << 31)	/* On-the-Go Enable */
-#define UDCCR_AALTHNP	(1 << 30)	/* A-device Alternate Host Negotiation
-					   Protocol Port Support */
-#define UDCCR_AHNP	(1 << 29)	/* A-device Host Negotiation Protocol
-					   Support */
-#define UDCCR_BHNP	(1 << 28)	/* B-device Host Negotiation Protocol
-					   Enable */
-#define UDCCR_DWRE	(1 << 16)	/* Device Remote Wake-up Enable */
-#define UDCCR_ACN	(0x03 << 11)	/* Active UDC configuration Number */
-#define UDCCR_ACN_S	11
-#define UDCCR_AIN	(0x07 << 8)	/* Active UDC interface Number */
-#define UDCCR_AIN_S	8
-#define UDCCR_AAISN	(0x07 << 5)	/* Active UDC Alternate Interface
-					   Setting Number */
-#define UDCCR_AAISN_S	5
-#define UDCCR_SMAC	(1 << 4)	/* Switch Endpoint Memory to Active
-					   Configuration */
-#define UDCCR_EMCE	(1 << 3)	/* Endpoint Memory Configuration
-					   Error */
-#define UDCCR_UDR	(1 << 2)	/* UDC Resume */
-#define UDCCR_UDA	(1 << 1)	/* UDC Active */
-#define UDCCR_UDE	(1 << 0)	/* UDC Enable */
-
-#define UDCICR0         __REG(0x40600004) /* UDC Interrupt Control Register0 */
-#define UDCICR1         __REG(0x40600008) /* UDC Interrupt Control Register1 */
-#define UDCICR_FIFOERR	(1 << 1)	/* FIFO Error interrupt for EP */
-#define UDCICR_PKTCOMPL (1 << 0)	/* Packet Complete interrupt for EP */
-
-#define UDC_INT_FIFOERROR  (0x2)
-#define UDC_INT_PACKETCMP  (0x1)
-
-#define UDCICR_INT(n,intr) (((intr) & 0x03) << (((n) & 0x0F) * 2))
-#define UDCICR1_IECC	(1 << 31)	/* IntEn - Configuration Change */
-#define UDCICR1_IESOF	(1 << 30)	/* IntEn - Start of Frame */
-#define UDCICR1_IERU	(1 << 29)	/* IntEn - Resume */
-#define UDCICR1_IESU	(1 << 28)	/* IntEn - Suspend */
-#define UDCICR1_IERS	(1 << 27)	/* IntEn - Reset */
-
-#define UDCISR0         __REG(0x4060000C) /* UDC Interrupt Status Register 0 */
-#define UDCISR1         __REG(0x40600010) /* UDC Interrupt Status Register 1 */
-#define UDCISR_INT(n,intr) (((intr) & 0x03) << (((n) & 0x0F) * 2))
-#define UDCISR1_IRCC	(1 << 31)	/* IntReq - Configuration Change */
-#define UDCISR1_IRSOF	(1 << 30)	/* IntReq - Start of Frame */
-#define UDCISR1_IRRU	(1 << 29)	/* IntReq - Resume */
-#define UDCISR1_IRSU	(1 << 28)	/* IntReq - Suspend */
-#define UDCISR1_IRRS	(1 << 27)	/* IntReq - Reset */
-
-#define UDCFNR          __REG(0x40600014) /* UDC Frame Number Register */
-#define UDCOTGICR	__REG(0x40600018) /* UDC On-The-Go interrupt control */
-#define UDCOTGICR_IESF	(1 << 24)	/* OTG SET_FEATURE command recvd */
-#define UDCOTGICR_IEXR	(1 << 17)	/* Extra Transceiver Interrupt
-					   Rising Edge Interrupt Enable */
-#define UDCOTGICR_IEXF	(1 << 16)	/* Extra Transceiver Interrupt
-					   Falling Edge Interrupt Enable */
-#define UDCOTGICR_IEVV40R (1 << 9)	/* OTG Vbus Valid 4.0V Rising Edge
-					   Interrupt Enable */
-#define UDCOTGICR_IEVV40F (1 << 8)	/* OTG Vbus Valid 4.0V Falling Edge
-					   Interrupt Enable */
-#define UDCOTGICR_IEVV44R (1 << 7)	/* OTG Vbus Valid 4.4V Rising Edge
-					   Interrupt Enable */
-#define UDCOTGICR_IEVV44F (1 << 6)	/* OTG Vbus Valid 4.4V Falling Edge
-					   Interrupt Enable */
-#define UDCOTGICR_IESVR	(1 << 5)	/* OTG Session Valid Rising Edge
-					   Interrupt Enable */
-#define UDCOTGICR_IESVF	(1 << 4)	/* OTG Session Valid Falling Edge
-					   Interrupt Enable */
-#define UDCOTGICR_IESDR	(1 << 3)	/* OTG A-Device SRP Detect Rising
-					   Edge Interrupt Enable */
-#define UDCOTGICR_IESDF	(1 << 2)	/* OTG A-Device SRP Detect Falling
-					   Edge Interrupt Enable */
-#define UDCOTGICR_IEIDR	(1 << 1)	/* OTG ID Change Rising Edge
-					   Interrupt Enable */
-#define UDCOTGICR_IEIDF	(1 << 0)	/* OTG ID Change Falling Edge
-					   Interrupt Enable */
-
-#define UP2OCR		  __REG(0x40600020)  /* USB Port 2 Output Control register */
-#define UP3OCR		  __REG(0x40600024)  /* USB Port 2 Output Control register */
-
-#define UP2OCR_CPVEN	(1 << 0)	/* Charge Pump Vbus Enable */
-#define UP2OCR_CPVPE	(1 << 1)	/* Charge Pump Vbus Pulse Enable */
-#define UP2OCR_DPPDE	(1 << 2)	/* Host Port 2 Transceiver D+ Pull Down Enable */
-#define UP2OCR_DMPDE	(1 << 3)	/* Host Port 2 Transceiver D- Pull Down Enable */
-#define UP2OCR_DPPUE	(1 << 4)	/* Host Port 2 Transceiver D+ Pull Up Enable */
-#define UP2OCR_DMPUE	(1 << 5)	/* Host Port 2 Transceiver D- Pull Up Enable */
-#define UP2OCR_DPPUBE	(1 << 6)	/* Host Port 2 Transceiver D+ Pull Up Bypass Enable */
-#define UP2OCR_DMPUBE	(1 << 7)	/* Host Port 2 Transceiver D- Pull Up Bypass Enable */
-#define UP2OCR_EXSP		(1 << 8)	/* External Transceiver Speed Control */
-#define UP2OCR_EXSUS	(1 << 9)	/* External Transceiver Speed Enable */
-#define UP2OCR_IDON		(1 << 10)	/* OTG ID Read Enable */
-#define UP2OCR_HXS		(1 << 16)	/* Host Port 2 Transceiver Output Select */
-#define UP2OCR_HXOE		(1 << 17)	/* Host Port 2 Transceiver Output Enable */
-#define UP2OCR_SEOS(x)		((x & 7) << 24)	/* Single-Ended Output Select */
-
-#define UDCCSN(x)	__REG2(0x40600100, (x) << 2)
-#define UDCCSR0         __REG(0x40600100) /* UDC Control/Status register - Endpoint 0 */
-#define UDCCSR0_SA	(1 << 7)	/* Setup Active */
-#define UDCCSR0_RNE	(1 << 6)	/* Receive FIFO Not Empty */
-#define UDCCSR0_FST	(1 << 5)	/* Force Stall */
-#define UDCCSR0_SST	(1 << 4)	/* Sent Stall */
-#define UDCCSR0_DME	(1 << 3)	/* DMA Enable */
-#define UDCCSR0_FTF	(1 << 2)	/* Flush Transmit FIFO */
-#define UDCCSR0_IPR	(1 << 1)	/* IN Packet Ready */
-#define UDCCSR0_OPC	(1 << 0)	/* OUT Packet Complete */
-
-#define UDCCSRA         __REG(0x40600104) /* UDC Control/Status register - Endpoint A */
-#define UDCCSRB         __REG(0x40600108) /* UDC Control/Status register - Endpoint B */
-#define UDCCSRC         __REG(0x4060010C) /* UDC Control/Status register - Endpoint C */
-#define UDCCSRD         __REG(0x40600110) /* UDC Control/Status register - Endpoint D */
-#define UDCCSRE         __REG(0x40600114) /* UDC Control/Status register - Endpoint E */
-#define UDCCSRF         __REG(0x40600118) /* UDC Control/Status register - Endpoint F */
-#define UDCCSRG         __REG(0x4060011C) /* UDC Control/Status register - Endpoint G */
-#define UDCCSRH         __REG(0x40600120) /* UDC Control/Status register - Endpoint H */
-#define UDCCSRI         __REG(0x40600124) /* UDC Control/Status register - Endpoint I */
-#define UDCCSRJ         __REG(0x40600128) /* UDC Control/Status register - Endpoint J */
-#define UDCCSRK         __REG(0x4060012C) /* UDC Control/Status register - Endpoint K */
-#define UDCCSRL         __REG(0x40600130) /* UDC Control/Status register - Endpoint L */
-#define UDCCSRM         __REG(0x40600134) /* UDC Control/Status register - Endpoint M */
-#define UDCCSRN         __REG(0x40600138) /* UDC Control/Status register - Endpoint N */
-#define UDCCSRP         __REG(0x4060013C) /* UDC Control/Status register - Endpoint P */
-#define UDCCSRQ         __REG(0x40600140) /* UDC Control/Status register - Endpoint Q */
-#define UDCCSRR         __REG(0x40600144) /* UDC Control/Status register - Endpoint R */
-#define UDCCSRS         __REG(0x40600148) /* UDC Control/Status register - Endpoint S */
-#define UDCCSRT         __REG(0x4060014C) /* UDC Control/Status register - Endpoint T */
-#define UDCCSRU         __REG(0x40600150) /* UDC Control/Status register - Endpoint U */
-#define UDCCSRV         __REG(0x40600154) /* UDC Control/Status register - Endpoint V */
-#define UDCCSRW         __REG(0x40600158) /* UDC Control/Status register - Endpoint W */
-#define UDCCSRX         __REG(0x4060015C) /* UDC Control/Status register - Endpoint X */
-
-#define UDCCSR_DPE	(1 << 9)	/* Data Packet Error */
-#define UDCCSR_FEF	(1 << 8)	/* Flush Endpoint FIFO */
-#define UDCCSR_SP	(1 << 7)	/* Short Packet Control/Status */
-#define UDCCSR_BNE	(1 << 6)	/* Buffer Not Empty (IN endpoints) */
-#define UDCCSR_BNF	(1 << 6)	/* Buffer Not Full (OUT endpoints) */
-#define UDCCSR_FST	(1 << 5)	/* Force STALL */
-#define UDCCSR_SST	(1 << 4)	/* Sent STALL */
-#define UDCCSR_DME	(1 << 3)	/* DMA Enable */
-#define UDCCSR_TRN	(1 << 2)	/* Tx/Rx NAK */
-#define UDCCSR_PC	(1 << 1)	/* Packet Complete */
-#define UDCCSR_FS	(1 << 0)	/* FIFO needs service */
-
-#define UDCBCN(x)	__REG2(0x40600200, (x)<<2)
-#define UDCBCR0         __REG(0x40600200) /* Byte Count Register - EP0 */
-#define UDCBCRA         __REG(0x40600204) /* Byte Count Register - EPA */
-#define UDCBCRB         __REG(0x40600208) /* Byte Count Register - EPB */
-#define UDCBCRC         __REG(0x4060020C) /* Byte Count Register - EPC */
-#define UDCBCRD         __REG(0x40600210) /* Byte Count Register - EPD */
-#define UDCBCRE         __REG(0x40600214) /* Byte Count Register - EPE */
-#define UDCBCRF         __REG(0x40600218) /* Byte Count Register - EPF */
-#define UDCBCRG         __REG(0x4060021C) /* Byte Count Register - EPG */
-#define UDCBCRH         __REG(0x40600220) /* Byte Count Register - EPH */
-#define UDCBCRI         __REG(0x40600224) /* Byte Count Register - EPI */
-#define UDCBCRJ         __REG(0x40600228) /* Byte Count Register - EPJ */
-#define UDCBCRK         __REG(0x4060022C) /* Byte Count Register - EPK */
-#define UDCBCRL         __REG(0x40600230) /* Byte Count Register - EPL */
-#define UDCBCRM         __REG(0x40600234) /* Byte Count Register - EPM */
-#define UDCBCRN         __REG(0x40600238) /* Byte Count Register - EPN */
-#define UDCBCRP         __REG(0x4060023C) /* Byte Count Register - EPP */
-#define UDCBCRQ         __REG(0x40600240) /* Byte Count Register - EPQ */
-#define UDCBCRR         __REG(0x40600244) /* Byte Count Register - EPR */
-#define UDCBCRS         __REG(0x40600248) /* Byte Count Register - EPS */
-#define UDCBCRT         __REG(0x4060024C) /* Byte Count Register - EPT */
-#define UDCBCRU         __REG(0x40600250) /* Byte Count Register - EPU */
-#define UDCBCRV         __REG(0x40600254) /* Byte Count Register - EPV */
-#define UDCBCRW         __REG(0x40600258) /* Byte Count Register - EPW */
-#define UDCBCRX         __REG(0x4060025C) /* Byte Count Register - EPX */
-
-#define UDCDN(x)	__REG2(0x40600300, (x)<<2)
-#define PHYS_UDCDN(x)	(0x40600300 + ((x)<<2))
-#define PUDCDN(x)	(volatile u32 *)(io_p2v(PHYS_UDCDN((x))))
-#define UDCDR0          __REG(0x40600300) /* Data Register - EP0 */
-#define UDCDRA          __REG(0x40600304) /* Data Register - EPA */
-#define UDCDRB          __REG(0x40600308) /* Data Register - EPB */
-#define UDCDRC          __REG(0x4060030C) /* Data Register - EPC */
-#define UDCDRD          __REG(0x40600310) /* Data Register - EPD */
-#define UDCDRE          __REG(0x40600314) /* Data Register - EPE */
-#define UDCDRF          __REG(0x40600318) /* Data Register - EPF */
-#define UDCDRG          __REG(0x4060031C) /* Data Register - EPG */
-#define UDCDRH          __REG(0x40600320) /* Data Register - EPH */
-#define UDCDRI          __REG(0x40600324) /* Data Register - EPI */
-#define UDCDRJ          __REG(0x40600328) /* Data Register - EPJ */
-#define UDCDRK          __REG(0x4060032C) /* Data Register - EPK */
-#define UDCDRL          __REG(0x40600330) /* Data Register - EPL */
-#define UDCDRM          __REG(0x40600334) /* Data Register - EPM */
-#define UDCDRN          __REG(0x40600338) /* Data Register - EPN */
-#define UDCDRP          __REG(0x4060033C) /* Data Register - EPP */
-#define UDCDRQ          __REG(0x40600340) /* Data Register - EPQ */
-#define UDCDRR          __REG(0x40600344) /* Data Register - EPR */
-#define UDCDRS          __REG(0x40600348) /* Data Register - EPS */
-#define UDCDRT          __REG(0x4060034C) /* Data Register - EPT */
-#define UDCDRU          __REG(0x40600350) /* Data Register - EPU */
-#define UDCDRV          __REG(0x40600354) /* Data Register - EPV */
-#define UDCDRW          __REG(0x40600358) /* Data Register - EPW */
-#define UDCDRX          __REG(0x4060035C) /* Data Register - EPX */
-
-#define UDCCN(x)       __REG2(0x40600400, (x)<<2)
-#define UDCCRA          __REG(0x40600404) /* Configuration register EPA */
-#define UDCCRB          __REG(0x40600408) /* Configuration register EPB */
-#define UDCCRC          __REG(0x4060040C) /* Configuration register EPC */
-#define UDCCRD          __REG(0x40600410) /* Configuration register EPD */
-#define UDCCRE          __REG(0x40600414) /* Configuration register EPE */
-#define UDCCRF          __REG(0x40600418) /* Configuration register EPF */
-#define UDCCRG          __REG(0x4060041C) /* Configuration register EPG */
-#define UDCCRH          __REG(0x40600420) /* Configuration register EPH */
-#define UDCCRI          __REG(0x40600424) /* Configuration register EPI */
-#define UDCCRJ          __REG(0x40600428) /* Configuration register EPJ */
-#define UDCCRK          __REG(0x4060042C) /* Configuration register EPK */
-#define UDCCRL          __REG(0x40600430) /* Configuration register EPL */
-#define UDCCRM          __REG(0x40600434) /* Configuration register EPM */
-#define UDCCRN          __REG(0x40600438) /* Configuration register EPN */
-#define UDCCRP          __REG(0x4060043C) /* Configuration register EPP */
-#define UDCCRQ          __REG(0x40600440) /* Configuration register EPQ */
-#define UDCCRR          __REG(0x40600444) /* Configuration register EPR */
-#define UDCCRS          __REG(0x40600448) /* Configuration register EPS */
-#define UDCCRT          __REG(0x4060044C) /* Configuration register EPT */
-#define UDCCRU          __REG(0x40600450) /* Configuration register EPU */
-#define UDCCRV          __REG(0x40600454) /* Configuration register EPV */
-#define UDCCRW          __REG(0x40600458) /* Configuration register EPW */
-#define UDCCRX          __REG(0x4060045C) /* Configuration register EPX */
-
-#define UDCCONR_CN	(0x03 << 25)	/* Configuration Number */
-#define UDCCONR_CN_S	(25)
-#define UDCCONR_IN	(0x07 << 22)	/* Interface Number */
-#define UDCCONR_IN_S	(22)
-#define UDCCONR_AISN	(0x07 << 19)	/* Alternate Interface Number */
-#define UDCCONR_AISN_S	(19)
-#define UDCCONR_EN	(0x0f << 15)	/* Endpoint Number */
-#define UDCCONR_EN_S	(15)
-#define UDCCONR_ET	(0x03 << 13)	/* Endpoint Type: */
-#define UDCCONR_ET_S	(13)
-#define UDCCONR_ET_INT	(0x03 << 13)	/*   Interrupt */
-#define UDCCONR_ET_BULK	(0x02 << 13)	/*   Bulk */
-#define UDCCONR_ET_ISO	(0x01 << 13)	/*   Isochronous */
-#define UDCCONR_ET_NU	(0x00 << 13)	/*   Not used */
-#define UDCCONR_ED	(1 << 12)	/* Endpoint Direction */
-#define UDCCONR_MPS	(0x3ff << 2)	/* Maximum Packet Size */
-#define UDCCONR_MPS_S	(2)
-#define UDCCONR_DE	(1 << 1)	/* Double Buffering Enable */
-#define UDCCONR_EE	(1 << 0)	/* Endpoint Enable */
-
-
-#define UDC_INT_FIFOERROR  (0x2)
-#define UDC_INT_PACKETCMP  (0x1)
-
-#define UDC_FNR_MASK     (0x7ff)
-
-#define UDCCSR_WR_MASK   (UDCCSR_DME|UDCCSR_FST)
-#define UDC_BCR_MASK    (0x3ff)
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pxa27x.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pxa27x.h
deleted file mode 100644
index 7cff6405..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pxa27x.h
+++ /dev/null
@@ -1,29 +0,0 @@
-#ifndef __MACH_PXA27x_H
-#define __MACH_PXA27x_H
-
-#include <linux/suspend.h>
-#include <mach/hardware.h>
-#include <mach/pxa2xx-regs.h>
-#include <mach/mfp-pxa27x.h>
-#include <mach/irqs.h>
-
-#define ARB_CNTRL	__REG(0x48000048)  /* Arbiter Control Register */
-
-#define ARB_DMA_SLV_PARK	(1<<31)	   /* Be parked with DMA slave when idle */
-#define ARB_CI_PARK		(1<<30)	   /* Be parked with Camera Interface when idle */
-#define ARB_EX_MEM_PARK 	(1<<29)	   /* Be parked with external MEMC when idle */
-#define ARB_INT_MEM_PARK	(1<<28)	   /* Be parked with internal MEMC when idle */
-#define ARB_USB_PARK		(1<<27)	   /* Be parked with USB when idle */
-#define ARB_LCD_PARK		(1<<26)	   /* Be parked with LCD when idle */
-#define ARB_DMA_PARK		(1<<25)	   /* Be parked with DMA when idle */
-#define ARB_CORE_PARK		(1<<24)	   /* Be parked with core when idle */
-#define ARB_LOCK_FLAG		(1<<23)	   /* Only Locking masters gain access to the bus */
-
-extern void __init pxa27x_map_io(void);
-extern void __init pxa27x_init_irq(void);
-extern int __init pxa27x_set_pwrmode(unsigned int mode);
-extern void pxa27x_cpu_pm_enter(suspend_state_t state);
-
-#define pxa27x_handle_irq	ichp_handle_irq
-
-#endif /* __MACH_PXA27x_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h
deleted file mode 100644
index ee6ced1c..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h
+++ /dev/null
@@ -1,187 +0,0 @@
-/*
- *  arch/arm/mach-pxa/include/mach/pxa2xx-regs.h
- *
- *  Taken from pxa-regs.h by Russell King
- *
- *  Author:	Nicolas Pitre
- *  Copyright:	MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __PXA2XX_REGS_H
-#define __PXA2XX_REGS_H
-
-#include <mach/hardware.h>
-
-/*
- * Power Manager
- */
-
-#define PMCR		__REG(0x40F00000)  /* Power Manager Control Register */
-#define PSSR		__REG(0x40F00004)  /* Power Manager Sleep Status Register */
-#define PSPR		__REG(0x40F00008)  /* Power Manager Scratch Pad Register */
-#define PWER		__REG(0x40F0000C)  /* Power Manager Wake-up Enable Register */
-#define PRER		__REG(0x40F00010)  /* Power Manager GPIO Rising-Edge Detect Enable Register */
-#define PFER		__REG(0x40F00014)  /* Power Manager GPIO Falling-Edge Detect Enable Register */
-#define PEDR		__REG(0x40F00018)  /* Power Manager GPIO Edge Detect Status Register */
-#define PCFR		__REG(0x40F0001C)  /* Power Manager General Configuration Register */
-#define PGSR0		__REG(0x40F00020)  /* Power Manager GPIO Sleep State Register for GP[31-0] */
-#define PGSR1		__REG(0x40F00024)  /* Power Manager GPIO Sleep State Register for GP[63-32] */
-#define PGSR2		__REG(0x40F00028)  /* Power Manager GPIO Sleep State Register for GP[84-64] */
-#define PGSR3		__REG(0x40F0002C)  /* Power Manager GPIO Sleep State Register for GP[118-96] */
-#define RCSR		__REG(0x40F00030)  /* Reset Controller Status Register */
-
-#define PSLR		__REG(0x40F00034)	/* Power Manager Sleep Config Register */
-#define PSTR		__REG(0x40F00038)	/* Power Manager Standby Config Register */
-#define PSNR		__REG(0x40F0003C)	/* Power Manager Sense Config Register */
-#define PVCR		__REG(0x40F00040)	/* Power Manager VoltageControl Register */
-#define PKWR		__REG(0x40F00050)	/* Power Manager KB Wake-up Enable Reg */
-#define PKSR		__REG(0x40F00054)	/* Power Manager KB Level-Detect Register */
-#define PCMD(x)	__REG2(0x40F00080, (x)<<2)
-#define PCMD0	__REG(0x40F00080 + 0 * 4)
-#define PCMD1	__REG(0x40F00080 + 1 * 4)
-#define PCMD2	__REG(0x40F00080 + 2 * 4)
-#define PCMD3	__REG(0x40F00080 + 3 * 4)
-#define PCMD4	__REG(0x40F00080 + 4 * 4)
-#define PCMD5	__REG(0x40F00080 + 5 * 4)
-#define PCMD6	__REG(0x40F00080 + 6 * 4)
-#define PCMD7	__REG(0x40F00080 + 7 * 4)
-#define PCMD8	__REG(0x40F00080 + 8 * 4)
-#define PCMD9	__REG(0x40F00080 + 9 * 4)
-#define PCMD10	__REG(0x40F00080 + 10 * 4)
-#define PCMD11	__REG(0x40F00080 + 11 * 4)
-#define PCMD12	__REG(0x40F00080 + 12 * 4)
-#define PCMD13	__REG(0x40F00080 + 13 * 4)
-#define PCMD14	__REG(0x40F00080 + 14 * 4)
-#define PCMD15	__REG(0x40F00080 + 15 * 4)
-#define PCMD16	__REG(0x40F00080 + 16 * 4)
-#define PCMD17	__REG(0x40F00080 + 17 * 4)
-#define PCMD18	__REG(0x40F00080 + 18 * 4)
-#define PCMD19	__REG(0x40F00080 + 19 * 4)
-#define PCMD20	__REG(0x40F00080 + 20 * 4)
-#define PCMD21	__REG(0x40F00080 + 21 * 4)
-#define PCMD22	__REG(0x40F00080 + 22 * 4)
-#define PCMD23	__REG(0x40F00080 + 23 * 4)
-#define PCMD24	__REG(0x40F00080 + 24 * 4)
-#define PCMD25	__REG(0x40F00080 + 25 * 4)
-#define PCMD26	__REG(0x40F00080 + 26 * 4)
-#define PCMD27	__REG(0x40F00080 + 27 * 4)
-#define PCMD28	__REG(0x40F00080 + 28 * 4)
-#define PCMD29	__REG(0x40F00080 + 29 * 4)
-#define PCMD30	__REG(0x40F00080 + 30 * 4)
-#define PCMD31	__REG(0x40F00080 + 31 * 4)
-
-#define PCMD_MBC	(1<<12)
-#define PCMD_DCE	(1<<11)
-#define PCMD_LC	(1<<10)
-/* FIXME:  PCMD_SQC need be checked.   */
-#define PCMD_SQC	(3<<8)	/* currently only bit 8 is changeable,
-				   bit 9 should be 0 all day. */
-#define PVCR_VCSA	(0x1<<14)
-#define PVCR_CommandDelay (0xf80)
-#define PCFR_PI2C_EN	(0x1 << 6)
-
-#define PSSR_OTGPH	(1 << 6)	/* OTG Peripheral control Hold */
-#define PSSR_RDH	(1 << 5)	/* Read Disable Hold */
-#define PSSR_PH		(1 << 4)	/* Peripheral Control Hold */
-#define PSSR_STS	(1 << 3)	/* Standby Mode Status */
-#define PSSR_VFS	(1 << 2)	/* VDD Fault Status */
-#define PSSR_BFS	(1 << 1)	/* Battery Fault Status */
-#define PSSR_SSS	(1 << 0)	/* Software Sleep Status */
-
-#define PSLR_SL_ROD	(1 << 20)	/* Sleep-Mode/Depp-Sleep Mode nRESET_OUT Disable */
-
-#define PCFR_RO		(1 << 15)	/* RDH Override */
-#define PCFR_PO		(1 << 14)	/* PH Override */
-#define PCFR_GPROD	(1 << 12)	/* GPIO nRESET_OUT Disable */
-#define PCFR_L1_EN	(1 << 11)	/* Sleep Mode L1 converter Enable */
-#define PCFR_FVC	(1 << 10)	/* Frequency/Voltage Change */
-#define PCFR_DC_EN	(1 << 7)	/* Sleep/deep-sleep DC-DC Converter Enable */
-#define PCFR_PI2CEN	(1 << 6)	/* Enable PI2C controller */
-#define PCFR_GPR_EN	(1 << 4)	/* nRESET_GPIO Pin Enable */
-#define PCFR_DS		(1 << 3)	/* Deep Sleep Mode */
-#define PCFR_FS		(1 << 2)	/* Float Static Chip Selects */
-#define PCFR_FP		(1 << 1)	/* Float PCMCIA controls */
-#define PCFR_OPDE	(1 << 0)	/* 3.6864 MHz oscillator power-down enable */
-
-#define RCSR_GPR	(1 << 3)	/* GPIO Reset */
-#define RCSR_SMR	(1 << 2)	/* Sleep Mode */
-#define RCSR_WDR	(1 << 1)	/* Watchdog Reset */
-#define RCSR_HWR	(1 << 0)	/* Hardware Reset */
-
-#define PWER_GPIO(Nb)	(1 << Nb)	/* GPIO [0..15] wake-up enable     */
-#define PWER_GPIO0	PWER_GPIO (0)	/* GPIO  [0] wake-up enable        */
-#define PWER_GPIO1	PWER_GPIO (1)	/* GPIO  [1] wake-up enable        */
-#define PWER_GPIO2	PWER_GPIO (2)	/* GPIO  [2] wake-up enable        */
-#define PWER_GPIO3	PWER_GPIO (3)	/* GPIO  [3] wake-up enable        */
-#define PWER_GPIO4	PWER_GPIO (4)	/* GPIO  [4] wake-up enable        */
-#define PWER_GPIO5	PWER_GPIO (5)	/* GPIO  [5] wake-up enable        */
-#define PWER_GPIO6	PWER_GPIO (6)	/* GPIO  [6] wake-up enable        */
-#define PWER_GPIO7	PWER_GPIO (7)	/* GPIO  [7] wake-up enable        */
-#define PWER_GPIO8	PWER_GPIO (8)	/* GPIO  [8] wake-up enable        */
-#define PWER_GPIO9	PWER_GPIO (9)	/* GPIO  [9] wake-up enable        */
-#define PWER_GPIO10	PWER_GPIO (10)	/* GPIO [10] wake-up enable        */
-#define PWER_GPIO11	PWER_GPIO (11)	/* GPIO [11] wake-up enable        */
-#define PWER_GPIO12	PWER_GPIO (12)	/* GPIO [12] wake-up enable        */
-#define PWER_GPIO13	PWER_GPIO (13)	/* GPIO [13] wake-up enable        */
-#define PWER_GPIO14	PWER_GPIO (14)	/* GPIO [14] wake-up enable        */
-#define PWER_GPIO15	PWER_GPIO (15)	/* GPIO [15] wake-up enable        */
-#define PWER_RTC	0x80000000	/* RTC alarm wake-up enable        */
-
-/*
- * PXA2xx specific Core clock definitions
- */
-#define CCCR		__REG(0x41300000)  /* Core Clock Configuration Register */
-#define CCSR		__REG(0x4130000C)  /* Core Clock Status Register */
-#define CKEN		__REG(0x41300004)  /* Clock Enable Register */
-#define OSCC		__REG(0x41300008)  /* Oscillator Configuration Register */
-
-#define CCCR_N_MASK	0x0380	/* Run Mode Frequency to Turbo Mode Frequency Multiplier */
-#define CCCR_M_MASK	0x0060	/* Memory Frequency to Run Mode Frequency Multiplier */
-#define CCCR_L_MASK	0x001f	/* Crystal Frequency to Memory Frequency Multiplier */
-
-#define CKEN_AC97CONF   (31)    /* AC97 Controller Configuration */
-#define CKEN_CAMERA	(24)	/* Camera Interface Clock Enable */
-#define CKEN_SSP1	(23)	/* SSP1 Unit Clock Enable */
-#define CKEN_MEMC	(22)	/* Memory Controller Clock Enable */
-#define CKEN_MEMSTK	(21)	/* Memory Stick Host Controller */
-#define CKEN_IM		(20)	/* Internal Memory Clock Enable */
-#define CKEN_KEYPAD	(19)	/* Keypad Interface Clock Enable */
-#define CKEN_USIM	(18)	/* USIM Unit Clock Enable */
-#define CKEN_MSL	(17)	/* MSL Unit Clock Enable */
-#define CKEN_LCD	(16)	/* LCD Unit Clock Enable */
-#define CKEN_PWRI2C	(15)	/* PWR I2C Unit Clock Enable */
-#define CKEN_I2C	(14)	/* I2C Unit Clock Enable */
-#define CKEN_FICP	(13)	/* FICP Unit Clock Enable */
-#define CKEN_MMC	(12)	/* MMC Unit Clock Enable */
-#define CKEN_USB	(11)	/* USB Unit Clock Enable */
-#define CKEN_ASSP	(10)	/* ASSP (SSP3) Clock Enable */
-#define CKEN_USBHOST	(10)	/* USB Host Unit Clock Enable */
-#define CKEN_OSTIMER	(9)	/* OS Timer Unit Clock Enable */
-#define CKEN_NSSP	(9)	/* NSSP (SSP2) Clock Enable */
-#define CKEN_I2S	(8)	/* I2S Unit Clock Enable */
-#define CKEN_BTUART	(7)	/* BTUART Unit Clock Enable */
-#define CKEN_FFUART	(6)	/* FFUART Unit Clock Enable */
-#define CKEN_STUART	(5)	/* STUART Unit Clock Enable */
-#define CKEN_HWUART	(4)	/* HWUART Unit Clock Enable */
-#define CKEN_SSP3	(4)	/* SSP3 Unit Clock Enable */
-#define CKEN_SSP	(3)	/* SSP Unit Clock Enable */
-#define CKEN_SSP2	(3)	/* SSP2 Unit Clock Enable */
-#define CKEN_AC97	(2)	/* AC97 Unit Clock Enable */
-#define CKEN_PWM1	(1)	/* PWM1 Clock Enable */
-#define CKEN_PWM0	(0)	/* PWM0 Clock Enable */
-
-#define OSCC_OON	(1 << 1)	/* 32.768kHz OON (write-once only bit) */
-#define OSCC_OOK	(1 << 0)	/* 32.768kHz OOK (read-only bit) */
-
-/* PWRMODE register M field values */
-
-#define PWRMODE_IDLE		0x1
-#define PWRMODE_STANDBY		0x2
-#define PWRMODE_SLEEP		0x3
-#define PWRMODE_DEEPSLEEP	0x7
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pxa300.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pxa300.h
deleted file mode 100644
index 733b6412..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pxa300.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef __MACH_PXA300_H
-#define __MACH_PXA300_H
-
-#include <mach/pxa3xx.h>
-#include <mach/mfp-pxa300.h>
-
-#endif /* __MACH_PXA300_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pxa320.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pxa320.h
deleted file mode 100644
index b6204e47..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pxa320.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef __MACH_PXA320_H
-#define __MACH_PXA320_H
-
-#include <mach/pxa3xx.h>
-#include <mach/mfp-pxa320.h>
-
-#endif /* __MACH_PXA320_H */
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h
deleted file mode 100644
index 207ecb49..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h
+++ /dev/null
@@ -1,205 +0,0 @@
-/*
- * arch/arm/mach-pxa/include/mach/pxa3xx-regs.h
- *
- * PXA3xx specific register definitions
- *
- * Copyright (C) 2007 Marvell International Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_PXA3XX_REGS_H
-#define __ASM_ARCH_PXA3XX_REGS_H
-
-#include <mach/hardware.h>
-
-/*
- * Oscillator Configuration Register (OSCC)
- */
-#define OSCC           __REG(0x41350000)  /* Oscillator Configuration Register */
-
-#define OSCC_PEN       (1 << 11)       /* 13MHz POUT */
-
-
-/*
- * Service Power Management Unit (MPMU)
- */
-#define PMCR		__REG(0x40F50000)	/* Power Manager Control Register */
-#define PSR		__REG(0x40F50004)	/* Power Manager S2 Status Register */
-#define PSPR		__REG(0x40F50008)	/* Power Manager Scratch Pad Register */
-#define PCFR		__REG(0x40F5000C)	/* Power Manager General Configuration Register */
-#define PWER		__REG(0x40F50010)	/* Power Manager Wake-up Enable Register */
-#define PWSR		__REG(0x40F50014)	/* Power Manager Wake-up Status Register */
-#define PECR		__REG(0x40F50018)	/* Power Manager EXT_WAKEUP[1:0] Control Register */
-#define DCDCSR		__REG(0x40F50080)	/* DC-DC Controller Status Register */
-#define PVCR		__REG(0x40F50100)	/* Power Manager Voltage Change Control Register */
-#define PCMD(x)		__REG(0x40F50110 + ((x) << 2))
-
-/*
- * Slave Power Management Unit
- */
-#define ASCR		__REG(0x40f40000)	/* Application Subsystem Power Status/Configuration */
-#define ARSR		__REG(0x40f40004)	/* Application Subsystem Reset Status */
-#define AD3ER		__REG(0x40f40008)	/* Application Subsystem Wake-Up from D3 Enable */
-#define AD3SR		__REG(0x40f4000c)	/* Application Subsystem Wake-Up from D3 Status */
-#define AD2D0ER		__REG(0x40f40010)	/* Application Subsystem Wake-Up from D2 to D0 Enable */
-#define AD2D0SR		__REG(0x40f40014)	/* Application Subsystem Wake-Up from D2 to D0 Status */
-#define AD2D1ER		__REG(0x40f40018)	/* Application Subsystem Wake-Up from D2 to D1 Enable */
-#define AD2D1SR		__REG(0x40f4001c)	/* Application Subsystem Wake-Up from D2 to D1 Status */
-#define AD1D0ER		__REG(0x40f40020)	/* Application Subsystem Wake-Up from D1 to D0 Enable */
-#define AD1D0SR		__REG(0x40f40024)	/* Application Subsystem Wake-Up from D1 to D0 Status */
-#define AGENP		__REG(0x40f4002c)	/* Application Subsystem General Purpose */
-#define AD3R		__REG(0x40f40030)	/* Application Subsystem D3 Configuration */
-#define AD2R		__REG(0x40f40034)	/* Application Subsystem D2 Configuration */
-#define AD1R		__REG(0x40f40038)	/* Application Subsystem D1 Configuration */
-
-/*
- * Application Subsystem Configuration bits.
- */
-#define ASCR_RDH		(1 << 31)
-#define ASCR_D1S		(1 << 2)
-#define ASCR_D2S		(1 << 1)
-#define ASCR_D3S		(1 << 0)
-
-/*
- * Application Reset Status bits.
- */
-#define ARSR_GPR		(1 << 3)
-#define ARSR_LPMR		(1 << 2)
-#define ARSR_WDT		(1 << 1)
-#define ARSR_HWR		(1 << 0)
-
-/*
- * Application Subsystem Wake-Up bits.
- */
-#define ADXER_WRTC		(1 << 31)	/* RTC */
-#define ADXER_WOST		(1 << 30)	/* OS Timer */
-#define ADXER_WTSI		(1 << 29)	/* Touchscreen */
-#define ADXER_WUSBH		(1 << 28)	/* USB host */
-#define ADXER_WUSB2		(1 << 26)	/* USB client 2.0 */
-#define ADXER_WMSL0		(1 << 24)	/* MSL port 0*/
-#define ADXER_WDMUX3		(1 << 23)	/* USB EDMUX3 */
-#define ADXER_WDMUX2		(1 << 22)	/* USB EDMUX2 */
-#define ADXER_WKP		(1 << 21)	/* Keypad */
-#define ADXER_WUSIM1		(1 << 20)	/* USIM Port 1 */
-#define ADXER_WUSIM0		(1 << 19)	/* USIM Port 0 */
-#define ADXER_WOTG		(1 << 16)	/* USBOTG input */
-#define ADXER_MFP_WFLASH	(1 << 15)	/* MFP: Data flash busy */
-#define ADXER_MFP_GEN12		(1 << 14)	/* MFP: MMC3/GPIO/OST inputs */
-#define ADXER_MFP_WMMC2		(1 << 13)	/* MFP: MMC2 */
-#define ADXER_MFP_WMMC1		(1 << 12)	/* MFP: MMC1 */
-#define ADXER_MFP_WI2C		(1 << 11)	/* MFP: I2C */
-#define ADXER_MFP_WSSP4		(1 << 10)	/* MFP: SSP4 */
-#define ADXER_MFP_WSSP3		(1 << 9)	/* MFP: SSP3 */
-#define ADXER_MFP_WMAXTRIX	(1 << 8)	/* MFP: matrix keypad */
-#define ADXER_MFP_WUART3	(1 << 7)	/* MFP: UART3 */
-#define ADXER_MFP_WUART2	(1 << 6)	/* MFP: UART2 */
-#define ADXER_MFP_WUART1	(1 << 5)	/* MFP: UART1 */
-#define ADXER_MFP_WSSP2		(1 << 4)	/* MFP: SSP2 */
-#define ADXER_MFP_WSSP1		(1 << 3)	/* MFP: SSP1 */
-#define ADXER_MFP_WAC97		(1 << 2)	/* MFP: AC97 */
-#define ADXER_WEXTWAKE1		(1 << 1)	/* External Wake 1 */
-#define ADXER_WEXTWAKE0		(1 << 0)	/* External Wake 0 */
-
-/*
- * AD3R/AD2R/AD1R bits.  R2-R5 are only defined for PXA320.
- */
-#define ADXR_L2			(1 << 8)
-#define ADXR_R5			(1 << 5)
-#define ADXR_R4			(1 << 4)
-#define ADXR_R3			(1 << 3)
-#define ADXR_R2			(1 << 2)
-#define ADXR_R1			(1 << 1)
-#define ADXR_R0			(1 << 0)
-
-/*
- * Values for PWRMODE CP15 register
- */
-#define PXA3xx_PM_S3D4C4	0x07	/* aka deep sleep */
-#define PXA3xx_PM_S2D3C4	0x06	/* aka sleep */
-#define PXA3xx_PM_S0D2C2	0x03	/* aka standby */
-#define PXA3xx_PM_S0D1C2	0x02	/* aka LCD refresh */
-#define PXA3xx_PM_S0D0C1	0x01
-
-/*
- * Application Subsystem Clock
- */
-#define ACCR		__REG(0x41340000)	/* Application Subsystem Clock Configuration Register */
-#define ACSR		__REG(0x41340004)	/* Application Subsystem Clock Status Register */
-#define AICSR		__REG(0x41340008)	/* Application Subsystem Interrupt Control/Status Register */
-#define CKENA		__REG(0x4134000C)	/* A Clock Enable Register */
-#define CKENB		__REG(0x41340010)	/* B Clock Enable Register */
-#define AC97_DIV	__REG(0x41340014)	/* AC97 clock divisor value register */
-
-#define ACCR_XPDIS		(1 << 31)	/* Core PLL Output Disable */
-#define ACCR_SPDIS		(1 << 30)	/* System PLL Output Disable */
-#define ACCR_D0CS		(1 << 26)	/* D0 Mode Clock Select */
-#define ACCR_PCCE		(1 << 11)	/* Power Mode Change Clock Enable */
-#define ACCR_DDR_D0CS		(1 << 7)	/* DDR SDRAM clock frequency in D0CS (PXA31x only) */
-
-#define ACCR_SMCFS_MASK		(0x7 << 23)	/* Static Memory Controller Frequency Select */
-#define ACCR_SFLFS_MASK		(0x3 << 18)	/* Frequency Select for Internal Memory Controller */
-#define ACCR_XSPCLK_MASK	(0x3 << 16)	/* Core Frequency during Frequency Change */
-#define ACCR_HSS_MASK		(0x3 << 14)	/* System Bus-Clock Frequency Select */
-#define ACCR_DMCFS_MASK		(0x3 << 12)	/* Dynamic Memory Controller Clock Frequency Select */
-#define ACCR_XN_MASK		(0x7 << 8)	/* Core PLL Turbo-Mode-to-Run-Mode Ratio */
-#define ACCR_XL_MASK		(0x1f)		/* Core PLL Run-Mode-to-Oscillator Ratio */
-
-#define ACCR_SMCFS(x)		(((x) & 0x7) << 23)
-#define ACCR_SFLFS(x)		(((x) & 0x3) << 18)
-#define ACCR_XSPCLK(x)		(((x) & 0x3) << 16)
-#define ACCR_HSS(x)		(((x) & 0x3) << 14)
-#define ACCR_DMCFS(x)		(((x) & 0x3) << 12)
-#define ACCR_XN(x)		(((x) & 0x7) << 8)
-#define ACCR_XL(x)		((x) & 0x1f)
-
-/*
- * Clock Enable Bit
- */
-#define CKEN_LCD	1	/* < LCD Clock Enable */
-#define CKEN_USBH	2	/* < USB host clock enable */
-#define CKEN_CAMERA	3	/* < Camera interface clock enable */
-#define CKEN_NAND	4	/* < NAND Flash Controller Clock Enable */
-#define CKEN_USB2	6	/* < USB 2.0 client clock enable. */
-#define CKEN_DMC	8	/* < Dynamic Memory Controller clock enable */
-#define CKEN_SMC	9	/* < Static Memory Controller clock enable */
-#define CKEN_ISC	10	/* < Internal SRAM Controller clock enable */
-#define CKEN_BOOT	11	/* < Boot rom clock enable */
-#define CKEN_MMC1	12	/* < MMC1 Clock enable */
-#define CKEN_MMC2	13	/* < MMC2 clock enable */
-#define CKEN_KEYPAD	14	/* < Keypand Controller Clock Enable */
-#define CKEN_CIR	15	/* < Consumer IR Clock Enable */
-#define CKEN_USIM0	17	/* < USIM[0] Clock Enable */
-#define CKEN_USIM1	18	/* < USIM[1] Clock Enable */
-#define CKEN_TPM	19	/* < TPM clock enable */
-#define CKEN_UDC	20	/* < UDC clock enable */
-#define CKEN_BTUART	21	/* < BTUART clock enable */
-#define CKEN_FFUART	22	/* < FFUART clock enable */
-#define CKEN_STUART	23	/* < STUART clock enable */
-#define CKEN_AC97	24	/* < AC97 clock enable */
-#define CKEN_TOUCH	25	/* < Touch screen Interface Clock Enable */
-#define CKEN_SSP1	26	/* < SSP1 clock enable */
-#define CKEN_SSP2	27	/* < SSP2 clock enable */
-#define CKEN_SSP3	28	/* < SSP3 clock enable */
-#define CKEN_SSP4	29	/* < SSP4 clock enable */
-#define CKEN_MSL0	30	/* < MSL0 clock enable */
-#define CKEN_PWM0	32	/* < PWM[0] clock enable */
-#define CKEN_PWM1	33	/* < PWM[1] clock enable */
-#define CKEN_I2C	36	/* < I2C clock enable */
-#define CKEN_INTC	38	/* < Interrupt controller clock enable */
-#define CKEN_GPIO	39	/* < GPIO clock enable */
-#define CKEN_1WIRE	40	/* < 1-wire clock enable */
-#define CKEN_HSIO2	41	/* < HSIO2 clock enable */
-#define CKEN_MINI_IM	48	/* < Mini-IM */
-#define CKEN_MINI_LCD	49	/* < Mini LCD */
-
-#define CKEN_MMC3	5	/* < MMC3 Clock Enable */
-#define CKEN_MVED	43	/* < MVED clock enable */
-
-/* Note: GCU clock enable bit differs on PXA300/PXA310 and PXA320 */
-#define CKEN_PXA300_GCU		42	/* Graphics controller clock enable */
-#define CKEN_PXA320_GCU		7	/* Graphics controller clock enable */
-
-#endif /* __ASM_ARCH_PXA3XX_REGS_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pxa3xx-u2d.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pxa3xx-u2d.h
deleted file mode 100644
index 9d82cb65..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pxa3xx-u2d.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * PXA3xx U2D header
- *
- * Copyright (C) 2010 CompuLab Ltd.
- *
- * Igor Grinberg <grinberg@compulab.co.il>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __PXA310_U2D__
-#define __PXA310_U2D__
-
-#include <linux/usb/ulpi.h>
-
-struct pxa3xx_u2d_platform_data {
-
-#define ULPI_SER_6PIN	(1 << 0)
-#define ULPI_SER_3PIN	(1 << 1)
-	unsigned int ulpi_mode;
-
-	int (*init)(struct device *);
-	void (*exit)(struct device *);
-};
-
-
-/* Start PXA3xx U2D host */
-int pxa3xx_u2d_start_hc(struct usb_bus *host);
-/* Stop PXA3xx U2D host */
-void pxa3xx_u2d_stop_hc(struct usb_bus *host);
-
-extern void pxa3xx_set_u2d_info(struct pxa3xx_u2d_platform_data *info);
-
-#endif /* __PXA310_U2D__ */
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pxa3xx.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pxa3xx.h
deleted file mode 100644
index cd3e57f4..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pxa3xx.h
+++ /dev/null
@@ -1,14 +0,0 @@
-#ifndef __MACH_PXA3XX_H	
-#define __MACH_PXA3XX_H
-
-#include <mach/hardware.h>
-#include <mach/pxa3xx-regs.h>
-#include <mach/irqs.h>
-
-extern void __init pxa3xx_map_io(void);
-extern void __init pxa3xx_init_irq(void);
-extern void __init pxa95x_init_irq(void);
-
-#define pxa3xx_handle_irq	ichp_handle_irq
-
-#endif /* __MACH_PXA3XX_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pxa930.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pxa930.h
deleted file mode 100644
index 190363b9..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pxa930.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef __MACH_PXA930_H
-#define __MACH_PXA930_H
-
-#include <mach/pxa3xx.h>
-#include <mach/mfp-pxa930.h>
-
-#endif /* __MACH_PXA930_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pxa930_rotary.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pxa930_rotary.h
deleted file mode 100644
index 053587ca..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pxa930_rotary.h
+++ /dev/null
@@ -1,20 +0,0 @@
-#ifndef __ASM_ARCH_PXA930_ROTARY_H
-#define __ASM_ARCH_PXA930_ROTARY_H
-
-/* NOTE:
- *
- * rotary can be either interpreted as a ralative input event (e.g.
- * REL_WHEEL or REL_HWHEEL) or a specific key event (e.g. UP/DOWN
- * or LEFT/RIGHT), depending on if up_key & down_key are assigned
- * or rel_code is assigned a non-zero value. When all are non-zero,
- * up_key and down_key will be preferred.
- */
-struct pxa930_rotary_platform_data {
-	int	up_key;
-	int	down_key;
-	int	rel_code;
-};
-
-void __init pxa930_set_rotarykey_info(struct pxa930_rotary_platform_data *info);
-
-#endif /* __ASM_ARCH_PXA930_ROTARY_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pxa930_trkball.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pxa930_trkball.h
deleted file mode 100644
index 5e0789bc..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pxa930_trkball.h
+++ /dev/null
@@ -1,10 +0,0 @@
-#ifndef __ASM_ARCH_PXA930_TRKBALL_H
-#define __ASM_ARCH_PXA930_TRKBALL_H
-
-struct pxa930_trkball_platform_data {
-	int x_filter;
-	int y_filter;
-};
-
-#endif /* __ASM_ARCH_PXA930_TRKBALL_H */
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pxa95x.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pxa95x.h
deleted file mode 100644
index cbb097c4..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pxa95x.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef __MACH_PXA95X_H
-#define __MACH_PXA95X_H
-
-#include <mach/pxa3xx.h>
-#include <mach/mfp-pxa930.h>
-
-#endif /* __MACH_PXA95X_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pxafb.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pxafb.h
deleted file mode 100644
index 486b4c51..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pxafb.h
+++ /dev/null
@@ -1,175 +0,0 @@
-/*
- *  arch/arm/mach-pxa/include/mach/pxafb.h
- *
- *  Support for the xscale frame buffer.
- *
- *  Author:     Jean-Frederic Clere
- *  Created:    Sep 22, 2003
- *  Copyright:  jfclere@sinix.net
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#include <linux/fb.h>
-#include <mach/regs-lcd.h>
-
-/*
- * Supported LCD connections
- *
- * bits 0 - 3: for LCD panel type:
- *
- *   STN  - for passive matrix
- *   DSTN - for dual scan passive matrix
- *   TFT  - for active matrix
- *
- * bits 4 - 9 : for bus width
- * bits 10-17 : for AC Bias Pin Frequency
- * bit     18 : for output enable polarity
- * bit     19 : for pixel clock edge
- * bit     20 : for output pixel format when base is RGBT16
- */
-#define LCD_CONN_TYPE(_x)	((_x) & 0x0f)
-#define LCD_CONN_WIDTH(_x)	(((_x) >> 4) & 0x1f)
-
-#define LCD_TYPE_MASK		0xf
-#define LCD_TYPE_UNKNOWN	0
-#define LCD_TYPE_MONO_STN	1
-#define LCD_TYPE_MONO_DSTN	2
-#define LCD_TYPE_COLOR_STN	3
-#define LCD_TYPE_COLOR_DSTN	4
-#define LCD_TYPE_COLOR_TFT	5
-#define LCD_TYPE_SMART_PANEL	6
-#define LCD_TYPE_MAX		7
-
-#define LCD_MONO_STN_4BPP	((4  << 4) | LCD_TYPE_MONO_STN)
-#define LCD_MONO_STN_8BPP	((8  << 4) | LCD_TYPE_MONO_STN)
-#define LCD_MONO_DSTN_8BPP	((8  << 4) | LCD_TYPE_MONO_DSTN)
-#define LCD_COLOR_STN_8BPP	((8  << 4) | LCD_TYPE_COLOR_STN)
-#define LCD_COLOR_DSTN_16BPP	((16 << 4) | LCD_TYPE_COLOR_DSTN)
-#define LCD_COLOR_TFT_8BPP	((8  << 4) | LCD_TYPE_COLOR_TFT)
-#define LCD_COLOR_TFT_16BPP	((16 << 4) | LCD_TYPE_COLOR_TFT)
-#define LCD_COLOR_TFT_18BPP	((18 << 4) | LCD_TYPE_COLOR_TFT)
-#define LCD_SMART_PANEL_8BPP	((8  << 4) | LCD_TYPE_SMART_PANEL)
-#define LCD_SMART_PANEL_16BPP	((16 << 4) | LCD_TYPE_SMART_PANEL)
-#define LCD_SMART_PANEL_18BPP	((18 << 4) | LCD_TYPE_SMART_PANEL)
-
-#define LCD_AC_BIAS_FREQ(x)	(((x) & 0xff) << 10)
-#define LCD_BIAS_ACTIVE_HIGH	(0 << 18)
-#define LCD_BIAS_ACTIVE_LOW	(1 << 18)
-#define LCD_PCLK_EDGE_RISE	(0 << 19)
-#define LCD_PCLK_EDGE_FALL	(1 << 19)
-#define LCD_ALTERNATE_MAPPING	(1 << 20)
-
-/*
- * This structure describes the machine which we are running on.
- * It is set in linux/arch/arm/mach-pxa/machine_name.c and used in the probe routine
- * of linux/drivers/video/pxafb.c
- */
-struct pxafb_mode_info {
-	u_long		pixclock;
-
-	u_short		xres;
-	u_short		yres;
-
-	u_char		bpp;
-	u_int		cmap_greyscale:1,
-			depth:8,
-			transparency:1,
-			unused:22;
-
-	/* Parallel Mode Timing */
-	u_char		hsync_len;
-	u_char		left_margin;
-	u_char		right_margin;
-
-	u_char		vsync_len;
-	u_char		upper_margin;
-	u_char		lower_margin;
-	u_char		sync;
-
-	/* Smart Panel Mode Timing - see PXA27x DM 7.4.15.0.3 for details
-	 * Note:
-	 * 1. all parameters in nanosecond (ns)
-	 * 2. a0cs{rd,wr}_set_hld are controlled by the same register bits
-	 *    in pxa27x and pxa3xx, initialize them to the same value or
-	 *    the larger one will be used
-	 * 3. same to {rd,wr}_pulse_width
-	 *
-	 * 4. LCD_PCLK_EDGE_{RISE,FALL} controls the L_PCLK_WR polarity
-	 * 5. sync & FB_SYNC_HOR_HIGH_ACT controls the L_LCLK_A0
-	 * 6. sync & FB_SYNC_VERT_HIGH_ACT controls the L_LCLK_RD
-	 */
-	unsigned	a0csrd_set_hld;	/* A0 and CS Setup/Hold Time before/after L_FCLK_RD */
-	unsigned	a0cswr_set_hld;	/* A0 and CS Setup/Hold Time before/after L_PCLK_WR */
-	unsigned	wr_pulse_width;	/* L_PCLK_WR pulse width */
-	unsigned	rd_pulse_width;	/* L_FCLK_RD pulse width */
-	unsigned	cmd_inh_time;	/* Command Inhibit time between two writes */
-	unsigned	op_hold_time;	/* Output Hold time from L_FCLK_RD negation */
-};
-
-struct pxafb_mach_info {
-	struct pxafb_mode_info *modes;
-	unsigned int num_modes;
-
-	unsigned int	lcd_conn;
-	unsigned long	video_mem_size;
-
-	u_int		fixed_modes:1,
-			cmap_inverse:1,
-			cmap_static:1,
-			acceleration_enabled:1,
-			unused:28;
-
-	/* The following should be defined in LCCR0
-	 *      LCCR0_Act or LCCR0_Pas          Active or Passive
-	 *      LCCR0_Sngl or LCCR0_Dual        Single/Dual panel
-	 *      LCCR0_Mono or LCCR0_Color       Mono/Color
-	 *      LCCR0_4PixMono or LCCR0_8PixMono (in mono single mode)
-	 *      LCCR0_DMADel(Tcpu) (optional)   DMA request delay
-	 *
-	 * The following should not be defined in LCCR0:
-	 *      LCCR0_OUM, LCCR0_BM, LCCR0_QDM, LCCR0_DIS, LCCR0_EFM
-	 *      LCCR0_IUM, LCCR0_SFM, LCCR0_LDM, LCCR0_ENB
-	 */
-	u_int		lccr0;
-	/* The following should be defined in LCCR3
-	 *      LCCR3_OutEnH or LCCR3_OutEnL    Output enable polarity
-	 *      LCCR3_PixRsEdg or LCCR3_PixFlEdg Pixel clock edge type
-	 *      LCCR3_Acb(X)                    AB Bias pin frequency
-	 *      LCCR3_DPC (optional)            Double Pixel Clock mode (untested)
-	 *
-	 * The following should not be defined in LCCR3
-	 *      LCCR3_HSP, LCCR3_VSP, LCCR0_Pcd(x), LCCR3_Bpp
-	 */
-	u_int		lccr3;
-	/* The following should be defined in LCCR4
-	 *	LCCR4_PAL_FOR_0 or LCCR4_PAL_FOR_1 or LCCR4_PAL_FOR_2
-	 *
-	 * All other bits in LCCR4 should be left alone.
-	 */
-	u_int		lccr4;
-	void (*pxafb_backlight_power)(int);
-	void (*pxafb_lcd_power)(int, struct fb_var_screeninfo *);
-	void (*smart_update)(struct fb_info *);
-};
-
-void pxa_set_fb_info(struct device *, struct pxafb_mach_info *);
-unsigned long pxafb_get_hsync_time(struct device *dev);
-
-#ifdef CONFIG_FB_PXA_SMARTPANEL
-extern int pxafb_smart_queue(struct fb_info *info, uint16_t *cmds, int);
-extern int pxafb_smart_flush(struct fb_info *info);
-#else
-static inline int pxafb_smart_queue(struct fb_info *info,
-				    uint16_t *cmds, int n)
-{
-	return 0;
-}
-
-static inline int pxafb_smart_flush(struct fb_info *info)
-{
-	return 0;
-}
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/regs-ac97.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/regs-ac97.h
deleted file mode 100644
index b8d14bd9..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/regs-ac97.h
+++ /dev/null
@@ -1,101 +0,0 @@
-#ifndef __ASM_ARCH_REGS_AC97_H
-#define __ASM_ARCH_REGS_AC97_H
-
-#include <mach/hardware.h>
-
-/*
- * AC97 Controller registers
- */
-
-#define POCR		__REG(0x40500000)  /* PCM Out Control Register */
-#define POCR_FEIE	(1 << 3)	/* FIFO Error Interrupt Enable */
-#define POCR_FSRIE	(1 << 1)	/* FIFO Service Request Interrupt Enable */
-
-#define PICR		__REG(0x40500004)  /* PCM In Control Register */
-#define PICR_FEIE	(1 << 3)	/* FIFO Error Interrupt Enable */
-#define PICR_FSRIE	(1 << 1)	/* FIFO Service Request Interrupt Enable */
-
-#define MCCR		__REG(0x40500008)  /* Mic In Control Register */
-#define MCCR_FEIE	(1 << 3)	/* FIFO Error Interrupt Enable */
-#define MCCR_FSRIE	(1 << 1)	/* FIFO Service Request Interrupt Enable */
-
-#define GCR		__REG(0x4050000C)  /* Global Control Register */
-#ifdef CONFIG_PXA3xx
-#define GCR_CLKBPB	(1 << 31)	/* Internal clock enable */
-#endif
-#define GCR_nDMAEN	(1 << 24)	/* non DMA Enable */
-#define GCR_CDONE_IE	(1 << 19)	/* Command Done Interrupt Enable */
-#define GCR_SDONE_IE	(1 << 18)	/* Status Done Interrupt Enable */
-#define GCR_SECRDY_IEN	(1 << 9)	/* Secondary Ready Interrupt Enable */
-#define GCR_PRIRDY_IEN	(1 << 8)	/* Primary Ready Interrupt Enable */
-#define GCR_SECRES_IEN	(1 << 5)	/* Secondary Resume Interrupt Enable */
-#define GCR_PRIRES_IEN	(1 << 4)	/* Primary Resume Interrupt Enable */
-#define GCR_ACLINK_OFF	(1 << 3)	/* AC-link Shut Off */
-#define GCR_WARM_RST	(1 << 2)	/* AC97 Warm Reset */
-#define GCR_COLD_RST	(1 << 1)	/* AC'97 Cold Reset (0 = active) */
-#define GCR_GIE		(1 << 0)	/* Codec GPI Interrupt Enable */
-
-#define POSR		__REG(0x40500010)  /* PCM Out Status Register */
-#define POSR_FIFOE	(1 << 4)	/* FIFO error */
-#define POSR_FSR	(1 << 2)	/* FIFO Service Request */
-
-#define PISR		__REG(0x40500014)  /* PCM In Status Register */
-#define PISR_FIFOE	(1 << 4)	/* FIFO error */
-#define PISR_EOC	(1 << 3)	/* DMA End-of-Chain (exclusive clear) */
-#define PISR_FSR	(1 << 2)	/* FIFO Service Request */
-
-#define MCSR		__REG(0x40500018)  /* Mic In Status Register */
-#define MCSR_FIFOE	(1 << 4)	/* FIFO error */
-#define MCSR_EOC	(1 << 3)	/* DMA End-of-Chain (exclusive clear) */
-#define MCSR_FSR	(1 << 2)	/* FIFO Service Request */
-
-#define GSR		__REG(0x4050001C)  /* Global Status Register */
-#define GSR_CDONE	(1 << 19)	/* Command Done */
-#define GSR_SDONE	(1 << 18)	/* Status Done */
-#define GSR_RDCS	(1 << 15)	/* Read Completion Status */
-#define GSR_BIT3SLT12	(1 << 14)	/* Bit 3 of slot 12 */
-#define GSR_BIT2SLT12	(1 << 13)	/* Bit 2 of slot 12 */
-#define GSR_BIT1SLT12	(1 << 12)	/* Bit 1 of slot 12 */
-#define GSR_SECRES	(1 << 11)	/* Secondary Resume Interrupt */
-#define GSR_PRIRES	(1 << 10)	/* Primary Resume Interrupt */
-#define GSR_SCR		(1 << 9)	/* Secondary Codec Ready */
-#define GSR_PCR		(1 << 8)	/*  Primary Codec Ready */
-#define GSR_MCINT	(1 << 7)	/* Mic In Interrupt */
-#define GSR_POINT	(1 << 6)	/* PCM Out Interrupt */
-#define GSR_PIINT	(1 << 5)	/* PCM In Interrupt */
-#define GSR_ACOFFD	(1 << 3)	/* AC-link Shut Off Done */
-#define GSR_MOINT	(1 << 2)	/* Modem Out Interrupt */
-#define GSR_MIINT	(1 << 1)	/* Modem In Interrupt */
-#define GSR_GSCI	(1 << 0)	/* Codec GPI Status Change Interrupt */
-
-#define CAR		__REG(0x40500020)  /* CODEC Access Register */
-#define CAR_CAIP	(1 << 0)	/* Codec Access In Progress */
-
-#define PCDR		__REG(0x40500040)  /* PCM FIFO Data Register */
-#define MCDR		__REG(0x40500060)  /* Mic-in FIFO Data Register */
-
-#define MOCR		__REG(0x40500100)  /* Modem Out Control Register */
-#define MOCR_FEIE	(1 << 3)	/* FIFO Error */
-#define MOCR_FSRIE	(1 << 1)	/* FIFO Service Request Interrupt Enable */
-
-#define MICR		__REG(0x40500108)  /* Modem In Control Register */
-#define MICR_FEIE	(1 << 3)	/* FIFO Error */
-#define MICR_FSRIE	(1 << 1)	/* FIFO Service Request Interrupt Enable */
-
-#define MOSR		__REG(0x40500110)  /* Modem Out Status Register */
-#define MOSR_FIFOE	(1 << 4)	/* FIFO error */
-#define MOSR_FSR	(1 << 2)	/* FIFO Service Request */
-
-#define MISR		__REG(0x40500118)  /* Modem In Status Register */
-#define MISR_FIFOE	(1 << 4)	/* FIFO error */
-#define MISR_EOC	(1 << 3)	/* DMA End-of-Chain (exclusive clear) */
-#define MISR_FSR	(1 << 2)	/* FIFO Service Request */
-
-#define MODR		__REG(0x40500140)  /* Modem FIFO Data Register */
-
-#define PAC_REG_BASE	__REG(0x40500200)  /* Primary Audio Codec */
-#define SAC_REG_BASE	__REG(0x40500300)  /* Secondary Audio Codec */
-#define PMC_REG_BASE	__REG(0x40500400)  /* Primary Modem Codec */
-#define SMC_REG_BASE	__REG(0x40500500)  /* Secondary Modem Codec */
-
-#endif /* __ASM_ARCH_REGS_AC97_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/regs-lcd.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/regs-lcd.h
deleted file mode 100644
index f82dcea7..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/regs-lcd.h
+++ /dev/null
@@ -1,197 +0,0 @@
-#ifndef __ASM_ARCH_REGS_LCD_H
-#define __ASM_ARCH_REGS_LCD_H
-
-#include <mach/bitfield.h>
-
-/*
- * LCD Controller Registers and Bits Definitions
- */
-#define LCCR0		(0x000)	/* LCD Controller Control Register 0 */
-#define LCCR1		(0x004)	/* LCD Controller Control Register 1 */
-#define LCCR2		(0x008)	/* LCD Controller Control Register 2 */
-#define LCCR3		(0x00C)	/* LCD Controller Control Register 3 */
-#define LCCR4		(0x010)	/* LCD Controller Control Register 4 */
-#define LCCR5		(0x014)	/* LCD Controller Control Register 5 */
-#define LCSR		(0x038)	/* LCD Controller Status Register 0 */
-#define LCSR1		(0x034)	/* LCD Controller Status Register 1 */
-#define LIIDR		(0x03C)	/* LCD Controller Interrupt ID Register */
-#define TMEDRGBR	(0x040)	/* TMED RGB Seed Register */
-#define TMEDCR		(0x044)	/* TMED Control Register */
-
-#define FBR0		(0x020)	/* DMA Channel 0 Frame Branch Register */
-#define FBR1		(0x024)	/* DMA Channel 1 Frame Branch Register */
-#define FBR2		(0x028) /* DMA Channel 2 Frame Branch Register */
-#define FBR3		(0x02C) /* DMA Channel 2 Frame Branch Register */
-#define FBR4		(0x030) /* DMA Channel 2 Frame Branch Register */
-#define FBR5		(0x110) /* DMA Channel 2 Frame Branch Register */
-#define FBR6		(0x114) /* DMA Channel 2 Frame Branch Register */
-
-#define OVL1C1		(0x050)	/* Overlay 1 Control Register 1 */
-#define OVL1C2		(0x060)	/* Overlay 1 Control Register 2 */
-#define OVL2C1		(0x070)	/* Overlay 2 Control Register 1 */
-#define OVL2C2		(0x080)	/* Overlay 2 Control Register 2 */
-
-#define CMDCR		(0x100)	/* Command Control Register */
-#define PRSR		(0x104)	/* Panel Read Status Register */
-
-#define LCCR3_BPP(x)	((((x) & 0x7) << 24) | (((x) & 0x8) ? (1 << 29) : 0))
-
-#define LCCR3_PDFOR_0	(0 << 30)
-#define LCCR3_PDFOR_1	(1 << 30)
-#define LCCR3_PDFOR_2	(2 << 30)
-#define LCCR3_PDFOR_3	(3 << 30)
-
-#define LCCR4_PAL_FOR_0	(0 << 15)
-#define LCCR4_PAL_FOR_1	(1 << 15)
-#define LCCR4_PAL_FOR_2	(2 << 15)
-#define LCCR4_PAL_FOR_3	(3 << 15)
-#define LCCR4_PAL_FOR_MASK	(3 << 15)
-
-#define FDADR0		(0x200)	/* DMA Channel 0 Frame Descriptor Address Register */
-#define FDADR1		(0x210)	/* DMA Channel 1 Frame Descriptor Address Register */
-#define FDADR2		(0x220)	/* DMA Channel 2 Frame Descriptor Address Register */
-#define FDADR3		(0x230)	/* DMA Channel 3 Frame Descriptor Address Register */
-#define FDADR4		(0x240)	/* DMA Channel 4 Frame Descriptor Address Register */
-#define FDADR5		(0x250)	/* DMA Channel 5 Frame Descriptor Address Register */
-#define FDADR6		(0x260) /* DMA Channel 6 Frame Descriptor Address Register */
-
-#define LCCR0_ENB	(1 << 0)	/* LCD Controller enable */
-#define LCCR0_CMS	(1 << 1)	/* Color/Monochrome Display Select */
-#define LCCR0_Color	(LCCR0_CMS*0)	/*  Color display */
-#define LCCR0_Mono	(LCCR0_CMS*1)	/*  Monochrome display */
-#define LCCR0_SDS	(1 << 2)	/* Single/Dual Panel Display Select */
-#define LCCR0_Sngl	(LCCR0_SDS*0)	/*  Single panel display */
-#define LCCR0_Dual	(LCCR0_SDS*1)	/*  Dual panel display */
-
-#define LCCR0_LDM	(1 << 3)	/* LCD Disable Done Mask */
-#define LCCR0_SFM	(1 << 4)	/* Start of frame mask */
-#define LCCR0_IUM	(1 << 5)	/* Input FIFO underrun mask */
-#define LCCR0_EFM	(1 << 6)	/* End of Frame mask */
-#define LCCR0_PAS	(1 << 7)	/* Passive/Active display Select */
-#define LCCR0_Pas	(LCCR0_PAS*0)	/*  Passive display (STN) */
-#define LCCR0_Act	(LCCR0_PAS*1)	/*  Active display (TFT) */
-#define LCCR0_DPD	(1 << 9)	/* Double Pixel Data (monochrome) */
-#define LCCR0_4PixMono	(LCCR0_DPD*0)	/*  4-Pixel/clock Monochrome display */
-#define LCCR0_8PixMono	(LCCR0_DPD*1)	/*  8-Pixel/clock Monochrome display */
-#define LCCR0_DIS	(1 << 10)	/* LCD Disable */
-#define LCCR0_QDM	(1 << 11)	/* LCD Quick Disable mask */
-#define LCCR0_PDD	(0xff << 12)	/* Palette DMA request delay */
-#define LCCR0_PDD_S	12
-#define LCCR0_BM	(1 << 20)	/* Branch mask */
-#define LCCR0_OUM	(1 << 21)	/* Output FIFO underrun mask */
-#define LCCR0_LCDT	(1 << 22)	/* LCD panel type */
-#define LCCR0_RDSTM	(1 << 23)	/* Read status interrupt mask */
-#define LCCR0_CMDIM	(1 << 24)	/* Command interrupt mask */
-#define LCCR0_OUC	(1 << 25)	/* Overlay Underlay control bit */
-#define LCCR0_LDDALT	(1 << 26)	/* LDD alternate mapping control */
-
-#define LCCR1_PPL	Fld (10, 0)	/* Pixels Per Line - 1 */
-#define LCCR1_DisWdth(Pixel)	(((Pixel) - 1) << FShft (LCCR1_PPL))
-
-#define LCCR1_HSW	Fld (6, 10)	/* Horizontal Synchronization */
-#define LCCR1_HorSnchWdth(Tpix)	(((Tpix) - 1) << FShft (LCCR1_HSW))
-
-#define LCCR1_ELW	Fld (8, 16)	/* End-of-Line pixel clock Wait - 1 */
-#define LCCR1_EndLnDel(Tpix)	(((Tpix) - 1) << FShft (LCCR1_ELW))
-
-#define LCCR1_BLW	Fld (8, 24)	/* Beginning-of-Line pixel clock */
-#define LCCR1_BegLnDel(Tpix)	(((Tpix) - 1) << FShft (LCCR1_BLW))
-
-#define LCCR2_LPP	Fld (10, 0)	/* Line Per Panel - 1 */
-#define LCCR2_DisHght(Line)	(((Line) - 1) << FShft (LCCR2_LPP))
-
-#define LCCR2_VSW	Fld (6, 10)	/* Vertical Synchronization pulse - 1 */
-#define LCCR2_VrtSnchWdth(Tln)	(((Tln) - 1) << FShft (LCCR2_VSW))
-
-#define LCCR2_EFW	Fld (8, 16)	/* End-of-Frame line clock Wait */
-#define LCCR2_EndFrmDel(Tln)	((Tln) << FShft (LCCR2_EFW))
-
-#define LCCR2_BFW	Fld (8, 24)	/* Beginning-of-Frame line clock */
-#define LCCR2_BegFrmDel(Tln)	((Tln) << FShft (LCCR2_BFW))
-
-#define LCCR3_API	(0xf << 16)	/* AC Bias pin trasitions per interrupt */
-#define LCCR3_API_S	16
-#define LCCR3_VSP	(1 << 20)	/* vertical sync polarity */
-#define LCCR3_HSP	(1 << 21)	/* horizontal sync polarity */
-#define LCCR3_PCP	(1 << 22)	/* Pixel Clock Polarity (L_PCLK) */
-#define LCCR3_PixRsEdg	(LCCR3_PCP*0)	/*  Pixel clock Rising-Edge */
-#define LCCR3_PixFlEdg	(LCCR3_PCP*1)	/*  Pixel clock Falling-Edge */
-
-#define LCCR3_OEP	(1 << 23)	/* Output Enable Polarity */
-#define LCCR3_OutEnH	(LCCR3_OEP*0)	/*  Output Enable active High */
-#define LCCR3_OutEnL	(LCCR3_OEP*1)	/*  Output Enable active Low */
-
-#define LCCR3_DPC	(1 << 27)	/* double pixel clock mode */
-#define LCCR3_PCD	Fld (8, 0)	/* Pixel Clock Divisor */
-#define LCCR3_PixClkDiv(Div)	(((Div) << FShft (LCCR3_PCD)))
-
-#define LCCR3_ACB	Fld (8, 8)	/* AC Bias */
-#define LCCR3_Acb(Acb)	(((Acb) << FShft (LCCR3_ACB)))
-
-#define LCCR3_HorSnchH	(LCCR3_HSP*0)	/*  HSP Active High */
-#define LCCR3_HorSnchL	(LCCR3_HSP*1)	/*  HSP Active Low */
-
-#define LCCR3_VrtSnchH	(LCCR3_VSP*0)	/*  VSP Active High */
-#define LCCR3_VrtSnchL	(LCCR3_VSP*1)	/*  VSP Active Low */
-
-#define LCCR5_IUM(x)	(1 << ((x) + 23)) /* input underrun mask */
-#define LCCR5_BSM(x)	(1 << ((x) + 15)) /* branch mask */
-#define LCCR5_EOFM(x)	(1 << ((x) + 7))  /* end of frame mask */
-#define LCCR5_SOFM(x)	(1 << ((x) + 0))  /* start of frame mask */
-
-#define LCSR_LDD	(1 << 0)	/* LCD Disable Done */
-#define LCSR_SOF	(1 << 1)	/* Start of frame */
-#define LCSR_BER	(1 << 2)	/* Bus error */
-#define LCSR_ABC	(1 << 3)	/* AC Bias count */
-#define LCSR_IUL	(1 << 4)	/* input FIFO underrun Lower panel */
-#define LCSR_IUU	(1 << 5)	/* input FIFO underrun Upper panel */
-#define LCSR_OU		(1 << 6)	/* output FIFO underrun */
-#define LCSR_QD		(1 << 7)	/* quick disable */
-#define LCSR_EOF	(1 << 8)	/* end of frame */
-#define LCSR_BS		(1 << 9)	/* branch status */
-#define LCSR_SINT	(1 << 10)	/* subsequent interrupt */
-#define LCSR_RD_ST	(1 << 11)	/* read status */
-#define LCSR_CMD_INT	(1 << 12)	/* command interrupt */
-
-#define LCSR1_IU(x)	(1 << ((x) + 23)) /* Input FIFO underrun */
-#define LCSR1_BS(x)	(1 << ((x) + 15)) /* Branch Status */
-#define LCSR1_EOF(x)	(1 << ((x) + 7))  /* End of Frame Status */
-#define LCSR1_SOF(x)	(1 << ((x) - 1))  /* Start of Frame Status */
-
-#define LDCMD_PAL	(1 << 26)	/* instructs DMA to load palette buffer */
-
-/* overlay control registers */
-#define OVLxC1_PPL(x)	((((x) - 1) & 0x3ff) << 0)	/* Pixels Per Line */
-#define OVLxC1_LPO(x)	((((x) - 1) & 0x3ff) << 10)	/* Number of Lines */
-#define OVLxC1_BPP(x)	(((x) & 0xf) << 20)	/* Bits Per Pixel */
-#define OVLxC1_OEN	(1 << 31)		/* Enable bit for Overlay */
-#define OVLxC2_XPOS(x)	(((x) & 0x3ff) << 0)	/* Horizontal Position */
-#define OVLxC2_YPOS(x)	(((x) & 0x3ff) << 10)	/* Vertical Position */
-#define OVL2C2_PFOR(x)	(((x) & 0x7) << 20)	/* Pixel Format */
-
-/* smartpanel related */
-#define PRSR_DATA(x)	((x) & 0xff)	/* Panel Data */
-#define PRSR_A0		(1 << 8)	/* Read Data Source */
-#define PRSR_ST_OK	(1 << 9)	/* Status OK */
-#define PRSR_CON_NT	(1 << 10)	/* Continue to Next Command */
-
-#define SMART_CMD_A0			 (0x1 << 8)
-#define SMART_CMD_READ_STATUS_REG	 (0x0 << 9)
-#define SMART_CMD_READ_FRAME_BUFFER	((0x0 << 9) | SMART_CMD_A0)
-#define SMART_CMD_WRITE_COMMAND		 (0x1 << 9)
-#define SMART_CMD_WRITE_DATA		((0x1 << 9) | SMART_CMD_A0)
-#define SMART_CMD_WRITE_FRAME		((0x2 << 9) | SMART_CMD_A0)
-#define SMART_CMD_WAIT_FOR_VSYNC	 (0x3 << 9)
-#define SMART_CMD_NOOP			 (0x4 << 9)
-#define SMART_CMD_INTERRUPT		 (0x5 << 9)
-
-#define SMART_CMD(x)	(SMART_CMD_WRITE_COMMAND | ((x) & 0xff))
-#define SMART_DAT(x)	(SMART_CMD_WRITE_DATA | ((x) & 0xff))
-
-/* SMART_DELAY() is introduced for software controlled delay primitive which
- * can be inserted between command sequences, unused command 0x6 is used here
- * and delay ranges from 0ms ~ 255ms
- */
-#define SMART_CMD_DELAY		(0x6 << 9)
-#define SMART_DELAY(ms)		(SMART_CMD_DELAY | ((ms) & 0xff))
-#endif /* __ASM_ARCH_REGS_LCD_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/regs-ost.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/regs-ost.h
deleted file mode 100644
index a3e5f86e..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/regs-ost.h
+++ /dev/null
@@ -1,34 +0,0 @@
-#ifndef __ASM_MACH_REGS_OST_H
-#define __ASM_MACH_REGS_OST_H
-
-#include <mach/hardware.h>
-
-/*
- * OS Timer & Match Registers
- */
-
-#define OSMR0		__REG(0x40A00000)  /* */
-#define OSMR1		__REG(0x40A00004)  /* */
-#define OSMR2		__REG(0x40A00008)  /* */
-#define OSMR3		__REG(0x40A0000C)  /* */
-#define OSMR4		__REG(0x40A00080)  /* */
-#define OSCR		__REG(0x40A00010)  /* OS Timer Counter Register */
-#define OSCR4		__REG(0x40A00040)  /* OS Timer Counter Register */
-#define OMCR4		__REG(0x40A000C0)  /* */
-#define OSSR		__REG(0x40A00014)  /* OS Timer Status Register */
-#define OWER		__REG(0x40A00018)  /* OS Timer Watchdog Enable Register */
-#define OIER		__REG(0x40A0001C)  /* OS Timer Interrupt Enable Register */
-
-#define OSSR_M3		(1 << 3)	/* Match status channel 3 */
-#define OSSR_M2		(1 << 2)	/* Match status channel 2 */
-#define OSSR_M1		(1 << 1)	/* Match status channel 1 */
-#define OSSR_M0		(1 << 0)	/* Match status channel 0 */
-
-#define OWER_WME	(1 << 0)	/* Watchdog Match Enable */
-
-#define OIER_E3		(1 << 3)	/* Interrupt enable channel 3 */
-#define OIER_E2		(1 << 2)	/* Interrupt enable channel 2 */
-#define OIER_E1		(1 << 1)	/* Interrupt enable channel 1 */
-#define OIER_E0		(1 << 0)	/* Interrupt enable channel 0 */
-
-#endif /* __ASM_MACH_REGS_OST_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/regs-rtc.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/regs-rtc.h
deleted file mode 100644
index f0e4a589..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/regs-rtc.h
+++ /dev/null
@@ -1,23 +0,0 @@
-#ifndef __ASM_MACH_REGS_RTC_H
-#define __ASM_MACH_REGS_RTC_H
-
-#include <mach/hardware.h>
-
-/*
- * Real Time Clock
- */
-
-#define RCNR		__REG(0x40900000)  /* RTC Count Register */
-#define RTAR		__REG(0x40900004)  /* RTC Alarm Register */
-#define RTSR		__REG(0x40900008)  /* RTC Status Register */
-#define RTTR		__REG(0x4090000C)  /* RTC Timer Trim Register */
-#define PIAR		__REG(0x40900038)  /* Periodic Interrupt Alarm Register */
-
-#define RTSR_PICE	(1 << 15)	/* Periodic interrupt count enable */
-#define RTSR_PIALE	(1 << 14)	/* Periodic interrupt Alarm enable */
-#define RTSR_HZE	(1 << 3)	/* HZ interrupt enable */
-#define RTSR_ALE	(1 << 2)	/* RTC alarm interrupt enable */
-#define RTSR_HZ		(1 << 1)	/* HZ rising-edge detected */
-#define RTSR_AL		(1 << 0)	/* RTC alarm detected */
-
-#endif /* __ASM_MACH_REGS_RTC_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/regs-u2d.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/regs-u2d.h
deleted file mode 100644
index c15c0c57..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/regs-u2d.h
+++ /dev/null
@@ -1,200 +0,0 @@
-#ifndef __ASM_ARCH_PXA3xx_U2D_H
-#define __ASM_ARCH_PXA3xx_U2D_H
-
-#include <mach/bitfield.h>
-
-/*
- * USB2 device controller registers and bits definitions
- */
-#define U2DCR		(0x0000)	/* U2D Control Register */
-#define U2DCR_NDC	(1   << 31)	/* NAK During Config */
-#define U2DCR_HSTC	(0x7 << 28)	/* High Speed Timeout Calibration */
-#define U2DCR_SPEOREN	(1   << 27)	/* Short Packet EOR INTR generation Enable */
-#define U2DCR_FSTC	(0x7 << 24)	/* Full Speed Timeout Calibration */
-#define U2DCR_UCLKOVR	(1   << 22)	/* UTM Clock Override */
-#define U2DCR_ABP	(1   << 21)	/* Application Bus Power */
-#define U2DCR_ADD	(1   << 20)	/* Application Device Disconnect */
-#define U2DCR_CC	(1   << 19)	/* Configuration Change */
-#define U2DCR_HS	(1   << 18)	/* High Speed USB Detection */
-#define U2DCR_SMAC	(1   << 17)	/* Switch Endpoint Memory to Active Configuration */
-#define U2DCR_DWRE	(1   << 16)	/* Device Remote Wake-up Feature */
-#define U2DCR_ACN	(0xf << 12)	/* Active U2D Configuration Number */
-#define U2DCR_AIN	(0xf << 8)	/* Active U2D Interface Number */
-#define U2DCR_AAISN	(0xf << 4)	/* Active U2D Alternate Interface Setting Number */
-#define U2DCR_EMCE	(1   << 3)	/* Endpoint Memory Configuration Error */
-#define U2DCR_UDR	(1   << 2)	/* U2D Resume */
-#define U2DCR_UDA	(1   << 1)	/* U2D Active */
-#define U2DCR_UDE	(1   << 0)	/* U2D Enable */
-
-#define U2DICR			(0x0004)	/* U2D Interrupt Control Register */
-#define U2DISR			(0x000C)	/* U2D Interrupt Status Register */
-#define U2DINT_CC		(1 << 31)	/* Interrupt - Configuration Change */
-#define U2DINT_SOF		(1 << 30)	/* Interrupt - SOF */
-#define U2DINT_USOF		(1 << 29)	/* Interrupt - micro SOF */
-#define U2DINT_RU		(1 << 28)	/* Interrupt - Resume */
-#define U2DINT_SU		(1 << 27)	/* Interrupt - Suspend */
-#define U2DINT_RS		(1 << 26)	/* Interrupt - Reset */
-#define U2DINT_DPE		(1 << 25)	/* Interrupt - Data Packet Error */
-#define U2DINT_FIFOERR		(0x4)		/* Interrupt - endpoint FIFO error */
-#define U2DINT_PACKETCMP	(0x2)		/* Interrupt - endpoint packet complete */
-#define U2DINT_SPACKETCMP	(0x1)		/* Interrupt - endpoint short packet complete */
-
-#define U2DFNR			(0x0014)	/* U2D Frame Number Register */
-
-#define U2DINT(n, intr)		(((intr) & 0x07) << (((n) & 0x07) * 3))
-#define U2DICR2			(0x0008)	/* U2D Interrupt Control Register 2 */
-#define U2DISR2			(0x0010)	/* U2D Interrupt Status Register 2 */
-
-#define U2DOTGCR		(0x0020)	/* U2D OTG Control Register */
-#define U2DOTGCR_OTGEN		(1 << 31)	/* On-The-Go Enable */
-#define U2DOTGCR_AALTHNP	(1 << 30)	/* A-device Alternate Host Negotiation Protocal Port Support */
-#define U2DOTGCR_AHNP		(1 << 29)	/* A-device Host Negotiation Protocal Support */
-#define U2DOTGCR_BHNP		(1 << 28)	/* B-device Host Negotiation Protocal Enable */
-
-#ifdef CONFIG_CPU_PXA930
-#define U2DOTGCR_LPA		(1 << 15)	/* ULPI low power mode active */
-#define U2DOTGCR_IESI		(1 << 13)	/* OTG interrupt Enable */
-#define U2DOTGCR_ISSI		(1 << 12)	/* OTG interrupt status */
-#endif
-
-#define U2DOTGCR_CKAF	(1 << 5)	/* Carkit Mode Alternate Function Select */
-#define U2DOTGCR_UTMID	(1 << 4)	/* UTMI Interface Disable */
-#define U2DOTGCR_ULAF	(1 << 3)	/* ULPI Mode Alternate Function Select */
-#define U2DOTGCR_SMAF	(1 << 2)	/* Serial Mode Alternate Function Select */
-#define U2DOTGCR_RTSM	(1 << 1)	/* Return to Synchronous Mode (ULPI Mode) */
-#define U2DOTGCR_ULE	(1 << 0)	/* ULPI Wrapper Enable */
-
-#define U2DOTGICR	(0x0024)	/* U2D OTG Interrupt Control Register */
-#define U2DOTGISR	(0x0028)	/* U2D OTG Interrupt Status Register */
-
-#define U2DOTGINT_SF	(1 << 17)	/* OTG Set Feature Command Received */
-#define U2DOTGINT_SI	(1 << 16)	/* OTG Interrupt */
-#define U2DOTGINT_RLS1	(1 << 14)	/* RXCMD Linestate[1] Change Interrupt Rise */
-#define U2DOTGINT_RLS0	(1 << 13)	/* RXCMD Linestate[0] Change Interrupt Rise */
-#define U2DOTGINT_RID	(1 << 12)	/* RXCMD OTG ID Change Interrupt Rise */
-#define U2DOTGINT_RSE	(1 << 11)	/* RXCMD OTG Session End Interrupt Rise */
-#define U2DOTGINT_RSV	(1 << 10)	/* RXCMD OTG Session Valid Interrupt Rise */
-#define U2DOTGINT_RVV	(1 << 9)	/* RXCMD OTG Vbus Valid Interrupt Rise */
-#define U2DOTGINT_RCK	(1 << 8)	/* RXCMD Carkit Interrupt Rise */
-#define U2DOTGINT_FLS1	(1 << 6)	/* RXCMD Linestate[1] Change Interrupt Fall */
-#define U2DOTGINT_FLS0	(1 << 5)	/* RXCMD Linestate[0] Change Interrupt Fall */
-#define U2DOTGINT_FID	(1 << 4)	/* RXCMD OTG ID Change Interrupt Fall */
-#define U2DOTGINT_FSE	(1 << 3)	/* RXCMD OTG Session End Interrupt Fall */
-#define U2DOTGINT_FSV	(1 << 2)	/* RXCMD OTG Session Valid Interrupt Fall */
-#define U2DOTGINT_FVV	(1 << 1)	/* RXCMD OTG Vbus Valid Interrupt Fall */
-#define U2DOTGINT_FCK	(1 << 0)	/* RXCMD Carkit Interrupt Fall */
-
-#define U2DOTGUSR	(0x002C)	/* U2D OTG ULPI Status Register */
-#define U2DOTGUSR_LPA	(1 << 31)	/* ULPI Low Power Mode Active */
-#define U2DOTGUSR_S6A	(1 << 30)	/* ULPI Serial Mode (6-pin) Active */
-#define U2DOTGUSR_S3A	(1 << 29)	/* ULPI Serial Mode (3-pin) Active */
-#define U2DOTGUSR_CKA	(1 << 28)	/* ULPI Car Kit Mode Active */
-#define U2DOTGUSR_LS1	(1 << 6)	/* RXCMD Linestate 1 Status */
-#define U2DOTGUSR_LS0	(1 << 5)	/* RXCMD Linestate 0 Status */
-#define U2DOTGUSR_ID	(1 << 4)	/* OTG IDGnd Status */
-#define U2DOTGUSR_SE	(1 << 3)	/* OTG Session End Status */
-#define U2DOTGUSR_SV	(1 << 2)	/* OTG Session Valid Status */
-#define U2DOTGUSR_VV	(1 << 1)	/* OTG Vbus Valid Status */
-#define U2DOTGUSR_CK	(1 << 0)	/* Carkit Interrupt Status */
-
-#define U2DOTGUCR	(0x0030)	/* U2D OTG ULPI Control Register */
-#define U2DOTGUCR_RUN	(1    << 25)	/* RUN */
-#define U2DOTGUCR_RNW	(1    << 24)	/* Read or Write operation */
-#define U2DOTGUCR_ADDR	(0x3f << 16)	/* Address of the ULPI PHY register */
-#define U2DOTGUCR_WDATA	(0xff << 8)	/* The data for a WRITE command */
-#define U2DOTGUCR_RDATA	(0xff << 0)	/* The data for a READ command */
-
-#define U2DP3CR		(0x0034)	/* U2D Port 3 Control Register */
-#define U2DP3CR_P2SS	(0x3 << 8)	/* Host Port 2 Serial Mode Select */
-#define U2DP3CR_P3SS	(0x7 << 4)	/* Host Port 3 Serial Mode Select */
-#define U2DP3CR_VPVMBEN	(0x1 << 2)	/* Host Port 3 Vp/Vm Block Enable */
-#define U2DP3CR_CFG	(0x3 << 0)	/* Host Port 3 Configuration */
-
-#define U2DCSR0		(0x0100)	/* U2D Control/Status Register - Endpoint 0 */
-#define U2DCSR0_IPA	(1 << 8)	/* IN Packet Adjusted */
-#define U2DCSR0_SA	(1 << 7)	/* SETUP Active */
-#define U2DCSR0_RNE	(1 << 6)	/* Receive FIFO Not Empty */
-#define U2DCSR0_FST	(1 << 5)	/* Force Stall */
-#define U2DCSR0_SST	(1 << 4)	/* Send Stall */
-#define U2DCSR0_DME	(1 << 3)	/* DMA Enable */
-#define U2DCSR0_FTF	(1 << 2)	/* Flush Transmit FIFO */
-#define U2DCSR0_IPR	(1 << 1)	/* IN Packet Ready */
-#define U2DCSR0_OPC	(1 << 0)	/* OUT Packet Complete */
-
-#define U2DCSR(x)	(0x0100 + ((x) << 2))	/* U2D Control/Status Register - Endpoint x */
-#define U2DCSR_BF	(1 << 10)	/* Buffer Full, for OUT eps */
-#define U2DCSR_BE	(1 << 10)	/* Buffer Empty, for IN eps */
-#define U2DCSR_DPE	(1 << 9)	/* Data Packet Error, for ISO eps only */
-#define U2DCSR_FEF	(1 << 8)	/* Flush Endpoint FIFO */
-#define U2DCSR_SP	(1 << 7)	/* Short Packet Control/Status, for OUT eps only, readonly */
-#define U2DCSR_BNE	(1 << 6)	/* Buffer Not Empty, for OUT eps */
-#define U2DCSR_BNF	(1 << 6)	/* Buffer Not Full, for IN eps */
-#define U2DCSR_FST	(1 << 5)	/* Force STALL, write 1 set */
-#define U2DCSR_SST	(1 << 4)	/* Sent STALL, write 1 clear */
-#define U2DCSR_DME	(1 << 3)	/* DMA Enable */
-#define U2DCSR_TRN	(1 << 2)	/* Tx/Rx NAK, write 1 clear */
-#define U2DCSR_PC	(1 << 1)	/* Packet Complete, write 1 clear */
-#define U2DCSR_FS	(1 << 0)	/* FIFO needs Service */
-
-#define U2DBCR0		(0x0200)		/* U2D Byte Count Register - Endpoint 0 */
-#define U2DBCR(x)	(0x0200 + ((x) << 2))	/* U2D Byte Count Register - Endpoint x */
-
-#define U2DDR0		(0x0300)		/* U2D Data Register - Endpoint 0 */
-
-#define U2DEPCR(x)	(0x0400 + ((x) << 2))	/* U2D Configuration Register - Endpoint x */
-#define U2DEPCR_EE	(1 << 0)		/* Endpoint Enable */
-#define U2DEPCR_BS_MASK	(0x3FE)			/* Buffer Size, BS*8=FIFO size, max 8184B = 8KB */
-
-#define U2DSCA		(0x0500)		/* U2D Setup Command Address */
-#define U2DSCA_VALUE	(0x0120)
-
-#define U2DEN0		(0x0504)		/* U2D Endpoint Information Register - Endpoint 0 */
-#define U2DEN(x)	(0x0504 + ((x) << 2))	/* U2D Endpoint Information Register - Endpoint x */
-
-/* U2DMA registers */
-#define U2DMACSR0		(0x1000)	/* U2DMA Control/Status Register - Channel 0 */
-#define U2DMACSR(x)		(0x1000 + ((x) << 2))	/* U2DMA Control/Status Register - Channel x */
-#define U2DMACSR_RUN		(1 << 31)	/* Run Bit (read / write) */
-#define U2DMACSR_STOPIRQEN	(1 << 29)	/* Stop Interrupt Enable (read / write) */
-#define U2DMACSR_EORIRQEN	(1 << 28)	/* End of Receive Interrupt Enable (R/W) */
-#define U2DMACSR_EORJMPEN	(1 << 27)	/* Jump to next descriptor on EOR */
-#define U2DMACSR_EORSTOPEN	(1 << 26)	/* STOP on an EOR */
-#define U2DMACSR_RASIRQEN	(1 << 23)	/* Request After Cnannel Stopped Interrupt Enable */
-#define U2DMACSR_MASKRUN	(1 << 22)	/* Mask Run */
-#define U2DMACSR_SCEMC		(3 << 18)	/* System Bus Split Completion Error Message Class */
-#define U2DMACSR_SCEMI		(0x1f << 13)	/* System Bus Split Completion Error Message Index */
-#define U2DMACSR_BUSERRTYPE	(7 << 10)	/* PX Bus Error Type */
-#define U2DMACSR_EORINTR	(1 << 9)	/* End Of Receive */
-#define U2DMACSR_REQPEND	(1 << 8)	/* Request Pending */
-#define U2DMACSR_RASINTR	(1 << 4)	/* Request After Channel Stopped (read / write 1 clear) */
-#define U2DMACSR_STOPINTR	(1 << 3)	/* Stop Interrupt (read only) */
-#define U2DMACSR_ENDINTR	(1 << 2)	/* End Interrupt (read / write 1 clear) */
-#define U2DMACSR_STARTINTR	(1 << 1)	/* Start Interrupt (read / write 1 clear) */
-#define U2DMACSR_BUSERRINTR	(1 << 0)	/* Bus Error Interrupt (read / write 1 clear) */
-
-#define U2DMACR		(0x1080)		/* U2DMA Control Register */
-#define U2DMAINT	(0x10F0)		/* U2DMA Interrupt Register */
-
-#define U2DMABR0	(0x1100)		/* U2DMA Branch Register - Channel 0 */
-#define U2DMABR(x)      (0x1100 + (x) << 2)	/* U2DMA Branch Register - Channel x */
-
-#define U2DMADADR0      (0x1200)		/* U2DMA Descriptor Address Register - Channel 0 */
-#define U2DMADADR(x)    (0x1200 + (x) * 0x10)	/* U2DMA Descriptor Address Register - Channel x */
-
-#define U2DMADADR_STOP	(1U << 0)
-
-#define U2DMASADR0	(0x1204)		/* U2DMA Source Address Register - Channel 0 */
-#define U2DMASADR(x)	(0x1204 + (x) * 0x10)	/* U2DMA Source Address Register - Channel x */
-#define U2DMATADR0	(0x1208)		/* U2DMA Target Address Register - Channel 0 */
-#define U2DMATADR(x)	(0x1208 + (x) * 0x10)	/* U2DMA Target Address Register - Channel x */
-
-#define U2DMACMDR0	(0x120C)		/* U2DMA Command Address Register - Channel 0 */
-#define U2DMACMDR(x)	(0x120C + (x) * 0x10)	/* U2DMA Command Address Register - Channel x */
-
-#define U2DMACMDR_XFRDIS	(1 << 31)	/* Transfer Direction */
-#define U2DMACMDR_STARTIRQEN	(1 << 22)	/* Start Interrupt Enable */
-#define U2DMACMDR_ENDIRQEN	(1 << 21)	/* End Interrupt Enable */
-#define U2DMACMDR_PACKCOMP	(1 << 13)	/* Packet Complete */
-#define U2DMACMDR_LEN		(0x07ff)	/* length mask (max = 2K - 1) */
-
-#endif /* __ASM_ARCH_PXA3xx_U2D_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/regs-uart.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/regs-uart.h
deleted file mode 100644
index 55aeb7fb..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/regs-uart.h
+++ /dev/null
@@ -1,143 +0,0 @@
-#ifndef __ASM_ARCH_REGS_UART_H
-#define __ASM_ARCH_REGS_UART_H
-
-/*
- * UARTs
- */
-
-/* Full Function UART (FFUART) */
-#define FFUART		FFRBR
-#define FFRBR		__REG(0x40100000)  /* Receive Buffer Register (read only) */
-#define FFTHR		__REG(0x40100000)  /* Transmit Holding Register (write only) */
-#define FFIER		__REG(0x40100004)  /* Interrupt Enable Register (read/write) */
-#define FFIIR		__REG(0x40100008)  /* Interrupt ID Register (read only) */
-#define FFFCR		__REG(0x40100008)  /* FIFO Control Register (write only) */
-#define FFLCR		__REG(0x4010000C)  /* Line Control Register (read/write) */
-#define FFMCR		__REG(0x40100010)  /* Modem Control Register (read/write) */
-#define FFLSR		__REG(0x40100014)  /* Line Status Register (read only) */
-#define FFMSR		__REG(0x40100018)  /* Modem Status Register (read only) */
-#define FFSPR		__REG(0x4010001C)  /* Scratch Pad Register (read/write) */
-#define FFISR		__REG(0x40100020)  /* Infrared Selection Register (read/write) */
-#define FFDLL		__REG(0x40100000)  /* Divisor Latch Low Register (DLAB = 1) (read/write) */
-#define FFDLH		__REG(0x40100004)  /* Divisor Latch High Register (DLAB = 1) (read/write) */
-
-/* Bluetooth UART (BTUART) */
-#define BTUART		BTRBR
-#define BTRBR		__REG(0x40200000)  /* Receive Buffer Register (read only) */
-#define BTTHR		__REG(0x40200000)  /* Transmit Holding Register (write only) */
-#define BTIER		__REG(0x40200004)  /* Interrupt Enable Register (read/write) */
-#define BTIIR		__REG(0x40200008)  /* Interrupt ID Register (read only) */
-#define BTFCR		__REG(0x40200008)  /* FIFO Control Register (write only) */
-#define BTLCR		__REG(0x4020000C)  /* Line Control Register (read/write) */
-#define BTMCR		__REG(0x40200010)  /* Modem Control Register (read/write) */
-#define BTLSR		__REG(0x40200014)  /* Line Status Register (read only) */
-#define BTMSR		__REG(0x40200018)  /* Modem Status Register (read only) */
-#define BTSPR		__REG(0x4020001C)  /* Scratch Pad Register (read/write) */
-#define BTISR		__REG(0x40200020)  /* Infrared Selection Register (read/write) */
-#define BTDLL		__REG(0x40200000)  /* Divisor Latch Low Register (DLAB = 1) (read/write) */
-#define BTDLH		__REG(0x40200004)  /* Divisor Latch High Register (DLAB = 1) (read/write) */
-
-/* Standard UART (STUART) */
-#define STUART		STRBR
-#define STRBR		__REG(0x40700000)  /* Receive Buffer Register (read only) */
-#define STTHR		__REG(0x40700000)  /* Transmit Holding Register (write only) */
-#define STIER		__REG(0x40700004)  /* Interrupt Enable Register (read/write) */
-#define STIIR		__REG(0x40700008)  /* Interrupt ID Register (read only) */
-#define STFCR		__REG(0x40700008)  /* FIFO Control Register (write only) */
-#define STLCR		__REG(0x4070000C)  /* Line Control Register (read/write) */
-#define STMCR		__REG(0x40700010)  /* Modem Control Register (read/write) */
-#define STLSR		__REG(0x40700014)  /* Line Status Register (read only) */
-#define STMSR		__REG(0x40700018)  /* Reserved */
-#define STSPR		__REG(0x4070001C)  /* Scratch Pad Register (read/write) */
-#define STISR		__REG(0x40700020)  /* Infrared Selection Register (read/write) */
-#define STDLL		__REG(0x40700000)  /* Divisor Latch Low Register (DLAB = 1) (read/write) */
-#define STDLH		__REG(0x40700004)  /* Divisor Latch High Register (DLAB = 1) (read/write) */
-
-/* Hardware UART (HWUART) */
-#define HWUART		HWRBR
-#define HWRBR		__REG(0x41600000)  /* Receive Buffer Register (read only) */
-#define HWTHR		__REG(0x41600000)  /* Transmit Holding Register (write only) */
-#define HWIER		__REG(0x41600004)  /* Interrupt Enable Register (read/write) */
-#define HWIIR		__REG(0x41600008)  /* Interrupt ID Register (read only) */
-#define HWFCR		__REG(0x41600008)  /* FIFO Control Register (write only) */
-#define HWLCR		__REG(0x4160000C)  /* Line Control Register (read/write) */
-#define HWMCR		__REG(0x41600010)  /* Modem Control Register (read/write) */
-#define HWLSR		__REG(0x41600014)  /* Line Status Register (read only) */
-#define HWMSR		__REG(0x41600018)  /* Modem Status Register (read only) */
-#define HWSPR		__REG(0x4160001C)  /* Scratch Pad Register (read/write) */
-#define HWISR		__REG(0x41600020)  /* Infrared Selection Register (read/write) */
-#define HWFOR		__REG(0x41600024)  /* Receive FIFO Occupancy Register (read only) */
-#define HWABR		__REG(0x41600028)  /* Auto-Baud Control Register (read/write) */
-#define HWACR		__REG(0x4160002C)  /* Auto-Baud Count Register (read only) */
-#define HWDLL		__REG(0x41600000)  /* Divisor Latch Low Register (DLAB = 1) (read/write) */
-#define HWDLH		__REG(0x41600004)  /* Divisor Latch High Register (DLAB = 1) (read/write) */
-
-#define IER_DMAE	(1 << 7)	/* DMA Requests Enable */
-#define IER_UUE		(1 << 6)	/* UART Unit Enable */
-#define IER_NRZE	(1 << 5)	/* NRZ coding Enable */
-#define IER_RTIOE	(1 << 4)	/* Receiver Time Out Interrupt Enable */
-#define IER_MIE		(1 << 3)	/* Modem Interrupt Enable */
-#define IER_RLSE	(1 << 2)	/* Receiver Line Status Interrupt Enable */
-#define IER_TIE		(1 << 1)	/* Transmit Data request Interrupt Enable */
-#define IER_RAVIE	(1 << 0)	/* Receiver Data Available Interrupt Enable */
-
-#define IIR_FIFOES1	(1 << 7)	/* FIFO Mode Enable Status */
-#define IIR_FIFOES0	(1 << 6)	/* FIFO Mode Enable Status */
-#define IIR_TOD		(1 << 3)	/* Time Out Detected */
-#define IIR_IID2	(1 << 2)	/* Interrupt Source Encoded */
-#define IIR_IID1	(1 << 1)	/* Interrupt Source Encoded */
-#define IIR_IP		(1 << 0)	/* Interrupt Pending (active low) */
-
-#define FCR_ITL2	(1 << 7)	/* Interrupt Trigger Level */
-#define FCR_ITL1	(1 << 6)	/* Interrupt Trigger Level */
-#define FCR_RESETTF	(1 << 2)	/* Reset Transmitter FIFO */
-#define FCR_RESETRF	(1 << 1)	/* Reset Receiver FIFO */
-#define FCR_TRFIFOE	(1 << 0)	/* Transmit and Receive FIFO Enable */
-#define FCR_ITL_1	(0)
-#define FCR_ITL_8	(FCR_ITL1)
-#define FCR_ITL_16	(FCR_ITL2)
-#define FCR_ITL_32	(FCR_ITL2|FCR_ITL1)
-
-#define LCR_DLAB	(1 << 7)	/* Divisor Latch Access Bit */
-#define LCR_SB		(1 << 6)	/* Set Break */
-#define LCR_STKYP	(1 << 5)	/* Sticky Parity */
-#define LCR_EPS		(1 << 4)	/* Even Parity Select */
-#define LCR_PEN		(1 << 3)	/* Parity Enable */
-#define LCR_STB		(1 << 2)	/* Stop Bit */
-#define LCR_WLS1	(1 << 1)	/* Word Length Select */
-#define LCR_WLS0	(1 << 0)	/* Word Length Select */
-
-#define LSR_FIFOE	(1 << 7)	/* FIFO Error Status */
-#define LSR_TEMT	(1 << 6)	/* Transmitter Empty */
-#define LSR_TDRQ	(1 << 5)	/* Transmit Data Request */
-#define LSR_BI		(1 << 4)	/* Break Interrupt */
-#define LSR_FE		(1 << 3)	/* Framing Error */
-#define LSR_PE		(1 << 2)	/* Parity Error */
-#define LSR_OE		(1 << 1)	/* Overrun Error */
-#define LSR_DR		(1 << 0)	/* Data Ready */
-
-#define MCR_LOOP	(1 << 4)
-#define MCR_OUT2	(1 << 3)	/* force MSR_DCD in loopback mode */
-#define MCR_OUT1	(1 << 2)	/* force MSR_RI in loopback mode */
-#define MCR_RTS		(1 << 1)	/* Request to Send */
-#define MCR_DTR		(1 << 0)	/* Data Terminal Ready */
-
-#define MSR_DCD		(1 << 7)	/* Data Carrier Detect */
-#define MSR_RI		(1 << 6)	/* Ring Indicator */
-#define MSR_DSR		(1 << 5)	/* Data Set Ready */
-#define MSR_CTS		(1 << 4)	/* Clear To Send */
-#define MSR_DDCD	(1 << 3)	/* Delta Data Carrier Detect */
-#define MSR_TERI	(1 << 2)	/* Trailing Edge Ring Indicator */
-#define MSR_DDSR	(1 << 1)	/* Delta Data Set Ready */
-#define MSR_DCTS	(1 << 0)	/* Delta Clear To Send */
-
-/*
- * IrSR (Infrared Selection Register)
- */
-#define STISR_RXPL      (1 << 4)        /* Receive Data Polarity */
-#define STISR_TXPL      (1 << 3)        /* Transmit Data Polarity */
-#define STISR_XMODE     (1 << 2)        /* Transmit Pulse Width Select */
-#define STISR_RCVEIR    (1 << 1)        /* Receiver SIR Enable */
-#define STISR_XMITIR    (1 << 0)        /* Transmitter SIR Enable */
-
-#endif /* __ASM_ARCH_REGS_UART_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/reset.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/reset.h
deleted file mode 100644
index b6c10556..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/reset.h
+++ /dev/null
@@ -1,21 +0,0 @@
-#ifndef __ASM_ARCH_RESET_H
-#define __ASM_ARCH_RESET_H
-
-#define RESET_STATUS_HARDWARE	(1 << 0)	/* Hardware Reset */
-#define RESET_STATUS_WATCHDOG	(1 << 1)	/* Watchdog Reset */
-#define RESET_STATUS_LOWPOWER	(1 << 2)	/* Low Power/Sleep Exit */
-#define RESET_STATUS_GPIO	(1 << 3)	/* GPIO Reset */
-#define RESET_STATUS_ALL	(0xf)
-
-extern unsigned int reset_status;
-extern void clear_reset_status(unsigned int mask);
-
-/**
- * init_gpio_reset() - register GPIO as reset generator
- * @gpio: gpio nr
- * @output: set gpio as output instead of input during normal work
- * @level: output level
- */
-extern int init_gpio_reset(int gpio, int output, int level);
-
-#endif /* __ASM_ARCH_RESET_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/sharpsl_pm.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/sharpsl_pm.h
deleted file mode 100644
index 905be675..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/sharpsl_pm.h
+++ /dev/null
@@ -1,113 +0,0 @@
-/*
- * SharpSL Battery/PM Driver
- *
- * Copyright (c) 2004-2005 Richard Purdie
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-#ifndef _MACH_SHARPSL_PM
-#define _MACH_SHARPSL_PM
-
-struct sharpsl_charger_machinfo {
-	void (*init)(void);
-	void (*exit)(void);
-	int gpio_acin;
-	int gpio_batfull;
-	int batfull_irq;
-	int gpio_batlock;
-	int gpio_fatal;
-	void (*discharge)(int);
-	void (*discharge1)(int);
-	void (*charge)(int);
-	void (*measure_temp)(int);
-	void (*presuspend)(void);
-	void (*postsuspend)(void);
-	void (*earlyresume)(void);
-	unsigned long (*read_devdata)(int);
-#define SHARPSL_BATT_VOLT       1
-#define SHARPSL_BATT_TEMP       2
-#define SHARPSL_ACIN_VOLT       3
-#define SHARPSL_STATUS_ACIN     4
-#define SHARPSL_STATUS_LOCK     5
-#define SHARPSL_STATUS_CHRGFULL 6
-#define SHARPSL_STATUS_FATAL    7
-	unsigned long (*charger_wakeup)(void);
-	int (*should_wakeup)(unsigned int resume_on_alarm);
-	void (*backlight_limit)(int);
-	int (*backlight_get_status) (void);
-	int charge_on_volt;
-	int charge_on_temp;
-	int charge_acin_high;
-	int charge_acin_low;
-	int fatal_acin_volt;
-	int fatal_noacin_volt;
-	int bat_levels;
-	struct battery_thresh *bat_levels_noac;
-	struct battery_thresh *bat_levels_acin;
-	struct battery_thresh *bat_levels_noac_bl;
-	struct battery_thresh *bat_levels_acin_bl;
-	int status_high_acin;
-	int status_low_acin;
-	int status_high_noac;
-	int status_low_noac;
-};
-
-struct battery_thresh {
-	int voltage;
-	int percentage;
-};
-
-struct battery_stat {
-	int ac_status;         /* APM AC Present/Not Present */
-	int mainbat_status;    /* APM Main Battery Status */
-	int mainbat_percent;   /* Main Battery Percentage Charge */
-	int mainbat_voltage;   /* Main Battery Voltage */
-};
-
-struct sharpsl_pm_status {
-	struct device *dev;
-	struct timer_list ac_timer;
-	struct timer_list chrg_full_timer;
-
-	int charge_mode;
-#define CHRG_ERROR    (-1)
-#define CHRG_OFF      (0)
-#define CHRG_ON       (1)
-#define CHRG_DONE     (2)
-
-	unsigned int flags;
-#define SHARPSL_SUSPENDED       (1 << 0)  /* Device is Suspended */
-#define SHARPSL_ALARM_ACTIVE    (1 << 1)  /* Alarm is for charging event (not user) */
-#define SHARPSL_BL_LIMIT        (1 << 2)  /* Backlight Intensity Limited */
-#define SHARPSL_APM_QUEUED      (1 << 3)  /* APM Event Queued */
-#define SHARPSL_DO_OFFLINE_CHRG (1 << 4)  /* Trigger the offline charger */
-
-	int full_count;
-	unsigned long charge_start_time;
-	struct sharpsl_charger_machinfo *machinfo;
-	struct battery_stat battstat;
-};
-
-extern struct sharpsl_pm_status sharpsl_pm;
-
-extern struct battery_thresh sharpsl_battery_levels_acin[];
-extern struct battery_thresh sharpsl_battery_levels_noac[];
-
-#define SHARPSL_LED_ERROR  2
-#define SHARPSL_LED_ON     1
-#define SHARPSL_LED_OFF    0
-
-void sharpsl_battery_kick(void);
-void sharpsl_pm_led(int val);
-
-/* MAX1111 Channel Definitions */
-#define MAX1111_BATT_VOLT   4u
-#define MAX1111_BATT_TEMP   2u
-#define MAX1111_ACIN_VOLT   6u
-int sharpsl_pm_pxa_read_max1111(int channel);
-
-void corgi_lcd_limit_intensity(int limit);
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/smemc.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/smemc.h
deleted file mode 100644
index b7de471b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/smemc.h
+++ /dev/null
@@ -1,74 +0,0 @@
-/*
- * Static memory controller register definitions for PXA CPUs
- *
- * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __SMEMC_REGS_H
-#define __SMEMC_REGS_H
-
-#define PXA2XX_SMEMC_BASE	0x48000000
-#define PXA3XX_SMEMC_BASE	0x4a000000
-#define SMEMC_VIRT		IOMEM(0xf6000000)
-
-#define MDCNFG		(SMEMC_VIRT + 0x00)  /* SDRAM Configuration Register 0 */
-#define MDREFR		(SMEMC_VIRT + 0x04)  /* SDRAM Refresh Control Register */
-#define MSC0		(SMEMC_VIRT + 0x08)  /* Static Memory Control Register 0 */
-#define MSC1		(SMEMC_VIRT + 0x0C)  /* Static Memory Control Register 1 */
-#define MSC2		(SMEMC_VIRT + 0x10)  /* Static Memory Control Register 2 */
-#define MECR		(SMEMC_VIRT + 0x14)  /* Expansion Memory (PCMCIA/Compact Flash) Bus Configuration */
-#define SXLCR		(SMEMC_VIRT + 0x18)  /* LCR value to be written to SDRAM-Timing Synchronous Flash */
-#define SXCNFG		(SMEMC_VIRT + 0x1C)  /* Synchronous Static Memory Control Register */
-#define SXMRS		(SMEMC_VIRT + 0x24)  /* MRS value to be written to Synchronous Flash or SMROM */
-#define MCMEM0		(SMEMC_VIRT + 0x28)  /* Card interface Common Memory Space Socket 0 Timing */
-#define MCMEM1		(SMEMC_VIRT + 0x2C)  /* Card interface Common Memory Space Socket 1 Timing */
-#define MCATT0		(SMEMC_VIRT + 0x30)  /* Card interface Attribute Space Socket 0 Timing Configuration */
-#define MCATT1		(SMEMC_VIRT + 0x34)  /* Card interface Attribute Space Socket 1 Timing Configuration */
-#define MCIO0		(SMEMC_VIRT + 0x38)  /* Card interface I/O Space Socket 0 Timing Configuration */
-#define MCIO1		(SMEMC_VIRT + 0x3C)  /* Card interface I/O Space Socket 1 Timing Configuration */
-#define MDMRS		(SMEMC_VIRT + 0x40)  /* MRS value to be written to SDRAM */
-#define BOOT_DEF	(SMEMC_VIRT + 0x44)  /* Read-Only Boot-Time Register. Contains BOOT_SEL and PKG_SEL */
-#define MEMCLKCFG	(SMEMC_VIRT + 0x68)  /* Clock Configuration */
-#define CSADRCFG0	(SMEMC_VIRT + 0x80)  /* Address Configuration Register for CS0 */
-#define CSADRCFG1	(SMEMC_VIRT + 0x84)  /* Address Configuration Register for CS1 */
-#define CSADRCFG2	(SMEMC_VIRT + 0x88)  /* Address Configuration Register for CS2 */
-#define CSADRCFG3	(SMEMC_VIRT + 0x8C)  /* Address Configuration Register for CS3 */
-
-/*
- * More handy macros for PCMCIA
- *
- * Arg is socket number
- */
-#define MCMEM(s)	(SMEMC_VIRT + 0x28 + ((s)<<2))  /* Card interface Common Memory Space Socket s Timing */
-#define MCATT(s)	(SMEMC_VIRT + 0x30 + ((s)<<2))  /* Card interface Attribute Space Socket s Timing Configuration */
-#define MCIO(s)		(SMEMC_VIRT + 0x38 + ((s)<<2))  /* Card interface I/O Space Socket s Timing Configuration */
-
-/* MECR register defines */
-#define MECR_NOS	(1 << 0)	/* Number Of Sockets: 0 -> 1 sock, 1 -> 2 sock */
-#define MECR_CIT	(1 << 1)	/* Card Is There: 0 -> no card, 1 -> card inserted */
-
-#define MDCNFG_DE0	(1 << 0)	/* SDRAM Bank 0 Enable */
-#define MDCNFG_DE1	(1 << 1)	/* SDRAM Bank 1 Enable */
-#define MDCNFG_DE2	(1 << 16)	/* SDRAM Bank 2 Enable */
-#define MDCNFG_DE3	(1 << 17)	/* SDRAM Bank 3 Enable */
-
-#define MDREFR_K0DB4	(1 << 29)	/* SDCLK0 Divide by 4 Control/Status */
-#define MDREFR_K2FREE	(1 << 25)	/* SDRAM Free-Running Control */
-#define MDREFR_K1FREE	(1 << 24)	/* SDRAM Free-Running Control */
-#define MDREFR_K0FREE	(1 << 23)	/* SDRAM Free-Running Control */
-#define MDREFR_SLFRSH	(1 << 22)	/* SDRAM Self-Refresh Control/Status */
-#define MDREFR_APD	(1 << 20)	/* SDRAM/SSRAM Auto-Power-Down Enable */
-#define MDREFR_K2DB2	(1 << 19)	/* SDCLK2 Divide by 2 Control/Status */
-#define MDREFR_K2RUN	(1 << 18)	/* SDCLK2 Run Control/Status */
-#define MDREFR_K1DB2	(1 << 17)	/* SDCLK1 Divide by 2 Control/Status */
-#define MDREFR_K1RUN	(1 << 16)	/* SDCLK1 Run Control/Status */
-#define MDREFR_E1PIN	(1 << 15)	/* SDCKE1 Level Control/Status */
-#define MDREFR_K0DB2	(1 << 14)	/* SDCLK0 Divide by 2 Control/Status */
-#define MDREFR_K0RUN	(1 << 13)	/* SDCLK0 Run Control/Status */
-#define MDREFR_E0PIN	(1 << 12)	/* SDCKE0 Level Control/Status */
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/spitz.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/spitz.h
deleted file mode 100644
index 0bfe6507..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/spitz.h
+++ /dev/null
@@ -1,189 +0,0 @@
-/*
- * Hardware specific definitions for SL-Cx000 series of PDAs
- *
- * Copyright (c) 2005 Alexander Wykes
- * Copyright (c) 2005 Richard Purdie
- *
- * Based on Sharp's 2.4 kernel patches
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-#ifndef __ASM_ARCH_SPITZ_H
-#define __ASM_ARCH_SPITZ_H  1
-#endif
-
-#include <linux/fb.h>
-#include <linux/gpio.h>
-
-/* Spitz/Akita GPIOs */
-
-#define SPITZ_GPIO_KEY_INT         (0) /* Key Interrupt */
-#define SPITZ_GPIO_RESET           (1)
-#define SPITZ_GPIO_nSD_DETECT      (9)
-#define SPITZ_GPIO_TP_INT          (11) /* Touch Panel interrupt */
-#define SPITZ_GPIO_AK_INT          (13) /* Remote Control */
-#define SPITZ_GPIO_ADS7846_CS      (14)
-#define SPITZ_GPIO_SYNC            (16)
-#define SPITZ_GPIO_MAX1111_CS      (20)
-#define SPITZ_GPIO_FATAL_BAT       (21)
-#define SPITZ_GPIO_HSYNC           (22)
-#define SPITZ_GPIO_nSD_CLK         (32)
-#define SPITZ_GPIO_USB_DEVICE      (35)
-#define SPITZ_GPIO_USB_HOST        (37)
-#define SPITZ_GPIO_USB_CONNECT     (41)
-#define SPITZ_GPIO_LCDCON_CS       (53)
-#define SPITZ_GPIO_nPCE            (54)
-#define SPITZ_GPIO_nSD_WP          (81)
-#define SPITZ_GPIO_ON_RESET        (89)
-#define SPITZ_GPIO_BAT_COVER       (90)
-#define SPITZ_GPIO_CF_CD           (94)
-#define SPITZ_GPIO_ON_KEY          (95)
-#define SPITZ_GPIO_SWA             (97)
-#define SPITZ_GPIO_SWB             (96)
-#define SPITZ_GPIO_CHRG_FULL       (101)
-#define SPITZ_GPIO_CO              (101)
-#define SPITZ_GPIO_CF_IRQ          (105)
-#define SPITZ_GPIO_AC_IN           (115)
-#define SPITZ_GPIO_HP_IN           (116)
-
-/* Spitz Only GPIOs */
-
-#define SPITZ_GPIO_CF2_IRQ         (106) /* CF slot1 Ready */
-#define SPITZ_GPIO_CF2_CD          (93)
-
-
-/* Spitz/Akita Keyboard Definitions */
-
-#define SPITZ_KEY_STROBE_NUM         (11)
-#define SPITZ_KEY_SENSE_NUM          (7)
-#define SPITZ_GPIO_G0_STROBE_BIT     0x0f800000
-#define SPITZ_GPIO_G1_STROBE_BIT     0x00100000
-#define SPITZ_GPIO_G2_STROBE_BIT     0x01000000
-#define SPITZ_GPIO_G3_STROBE_BIT     0x00041880
-#define SPITZ_GPIO_G0_SENSE_BIT      0x00021000
-#define SPITZ_GPIO_G1_SENSE_BIT      0x000000d4
-#define SPITZ_GPIO_G2_SENSE_BIT      0x08000000
-#define SPITZ_GPIO_G3_SENSE_BIT      0x00000000
-
-#define SPITZ_GPIO_KEY_STROBE0       88
-#define SPITZ_GPIO_KEY_STROBE1       23
-#define SPITZ_GPIO_KEY_STROBE2       24
-#define SPITZ_GPIO_KEY_STROBE3       25
-#define SPITZ_GPIO_KEY_STROBE4       26
-#define SPITZ_GPIO_KEY_STROBE5       27
-#define SPITZ_GPIO_KEY_STROBE6       52
-#define SPITZ_GPIO_KEY_STROBE7       103
-#define SPITZ_GPIO_KEY_STROBE8       107
-#define SPITZ_GPIO_KEY_STROBE9       108
-#define SPITZ_GPIO_KEY_STROBE10      114
-
-#define SPITZ_GPIO_KEY_SENSE0        12
-#define SPITZ_GPIO_KEY_SENSE1        17
-#define SPITZ_GPIO_KEY_SENSE2        91
-#define SPITZ_GPIO_KEY_SENSE3        34
-#define SPITZ_GPIO_KEY_SENSE4        36
-#define SPITZ_GPIO_KEY_SENSE5        38
-#define SPITZ_GPIO_KEY_SENSE6        39
-
-
-/* Spitz Scoop Device (No. 1) GPIOs */
-/* Suspend States in comments */
-#define SPITZ_SCP_LED_GREEN     SCOOP_GPCR_PA11  /* Keep */
-#define SPITZ_SCP_JK_B          SCOOP_GPCR_PA12  /* Keep */
-#define SPITZ_SCP_CHRG_ON       SCOOP_GPCR_PA13  /* Keep */
-#define SPITZ_SCP_MUTE_L        SCOOP_GPCR_PA14  /* Low */
-#define SPITZ_SCP_MUTE_R        SCOOP_GPCR_PA15  /* Low */
-#define SPITZ_SCP_CF_POWER      SCOOP_GPCR_PA16  /* Keep */
-#define SPITZ_SCP_LED_ORANGE    SCOOP_GPCR_PA17  /* Keep */
-#define SPITZ_SCP_JK_A          SCOOP_GPCR_PA18  /* Low */
-#define SPITZ_SCP_ADC_TEMP_ON   SCOOP_GPCR_PA19  /* Low */
-
-#define SPITZ_SCP_IO_DIR      (SPITZ_SCP_JK_B | SPITZ_SCP_CHRG_ON | \
-                               SPITZ_SCP_MUTE_L | SPITZ_SCP_MUTE_R | \
-                               SPITZ_SCP_CF_POWER | SPITZ_SCP_JK_A | SPITZ_SCP_ADC_TEMP_ON)
-#define SPITZ_SCP_IO_OUT      (SPITZ_SCP_CHRG_ON | SPITZ_SCP_MUTE_L | SPITZ_SCP_MUTE_R)
-#define SPITZ_SCP_SUS_CLR     (SPITZ_SCP_MUTE_L | SPITZ_SCP_MUTE_R | SPITZ_SCP_JK_A | SPITZ_SCP_ADC_TEMP_ON)
-#define SPITZ_SCP_SUS_SET     0
-
-#define SPITZ_SCP_GPIO_BASE	(PXA_NR_BUILTIN_GPIO)
-#define SPITZ_GPIO_LED_GREEN	(SPITZ_SCP_GPIO_BASE + 0)
-#define SPITZ_GPIO_JK_B		(SPITZ_SCP_GPIO_BASE + 1)
-#define SPITZ_GPIO_CHRG_ON	(SPITZ_SCP_GPIO_BASE + 2)
-#define SPITZ_GPIO_MUTE_L	(SPITZ_SCP_GPIO_BASE + 3)
-#define SPITZ_GPIO_MUTE_R	(SPITZ_SCP_GPIO_BASE + 4)
-#define SPITZ_GPIO_CF_POWER	(SPITZ_SCP_GPIO_BASE + 5)
-#define SPITZ_GPIO_LED_ORANGE	(SPITZ_SCP_GPIO_BASE + 6)
-#define SPITZ_GPIO_JK_A		(SPITZ_SCP_GPIO_BASE + 7)
-#define SPITZ_GPIO_ADC_TEMP_ON	(SPITZ_SCP_GPIO_BASE + 8)
-
-/* Spitz Scoop Device (No. 2) GPIOs */
-/* Suspend States in comments */
-#define SPITZ_SCP2_IR_ON           SCOOP_GPCR_PA11  /* High */
-#define SPITZ_SCP2_AKIN_PULLUP     SCOOP_GPCR_PA12  /* Keep */
-#define SPITZ_SCP2_RESERVED_1      SCOOP_GPCR_PA13  /* High */
-#define SPITZ_SCP2_RESERVED_2      SCOOP_GPCR_PA14  /* Low */
-#define SPITZ_SCP2_RESERVED_3      SCOOP_GPCR_PA15  /* Low */
-#define SPITZ_SCP2_RESERVED_4      SCOOP_GPCR_PA16  /* Low */
-#define SPITZ_SCP2_BACKLIGHT_CONT  SCOOP_GPCR_PA17  /* Low */
-#define SPITZ_SCP2_BACKLIGHT_ON    SCOOP_GPCR_PA18  /* Low */
-#define SPITZ_SCP2_MIC_BIAS        SCOOP_GPCR_PA19  /* Low */
-
-#define SPITZ_SCP2_IO_DIR (SPITZ_SCP2_AKIN_PULLUP | SPITZ_SCP2_RESERVED_1 | \
-                           SPITZ_SCP2_RESERVED_2 | SPITZ_SCP2_RESERVED_3 | SPITZ_SCP2_RESERVED_4 | \
-                           SPITZ_SCP2_BACKLIGHT_CONT | SPITZ_SCP2_BACKLIGHT_ON | SPITZ_SCP2_MIC_BIAS)
-
-#define SPITZ_SCP2_IO_OUT   (SPITZ_SCP2_AKIN_PULLUP | SPITZ_SCP2_RESERVED_1)
-#define SPITZ_SCP2_SUS_CLR  (SPITZ_SCP2_RESERVED_2 | SPITZ_SCP2_RESERVED_3 | SPITZ_SCP2_RESERVED_4 | \
-                             SPITZ_SCP2_BACKLIGHT_CONT | SPITZ_SCP2_BACKLIGHT_ON | SPITZ_SCP2_MIC_BIAS)
-#define SPITZ_SCP2_SUS_SET  (SPITZ_SCP2_IR_ON | SPITZ_SCP2_RESERVED_1)
-
-#define SPITZ_SCP2_GPIO_BASE		(PXA_NR_BUILTIN_GPIO + 12)
-#define SPITZ_GPIO_IR_ON		(SPITZ_SCP2_GPIO_BASE + 0)
-#define SPITZ_GPIO_AKIN_PULLUP		(SPITZ_SCP2_GPIO_BASE + 1)
-#define SPITZ_GPIO_RESERVED_1		(SPITZ_SCP2_GPIO_BASE + 2)
-#define SPITZ_GPIO_RESERVED_2		(SPITZ_SCP2_GPIO_BASE + 3)
-#define SPITZ_GPIO_RESERVED_3		(SPITZ_SCP2_GPIO_BASE + 4)
-#define SPITZ_GPIO_RESERVED_4		(SPITZ_SCP2_GPIO_BASE + 5)
-#define SPITZ_GPIO_BACKLIGHT_CONT	(SPITZ_SCP2_GPIO_BASE + 6)
-#define SPITZ_GPIO_BACKLIGHT_ON		(SPITZ_SCP2_GPIO_BASE + 7)
-#define SPITZ_GPIO_MIC_BIAS		(SPITZ_SCP2_GPIO_BASE + 8)
-
-/* Akita IO Expander GPIOs */
-#define AKITA_IOEXP_GPIO_BASE		(PXA_NR_BUILTIN_GPIO + 12)
-#define AKITA_GPIO_RESERVED_0		(AKITA_IOEXP_GPIO_BASE + 0)
-#define AKITA_GPIO_RESERVED_1		(AKITA_IOEXP_GPIO_BASE + 1)
-#define AKITA_GPIO_MIC_BIAS		(AKITA_IOEXP_GPIO_BASE + 2)
-#define AKITA_GPIO_BACKLIGHT_ON		(AKITA_IOEXP_GPIO_BASE + 3)
-#define AKITA_GPIO_BACKLIGHT_CONT	(AKITA_IOEXP_GPIO_BASE + 4)
-#define AKITA_GPIO_AKIN_PULLUP		(AKITA_IOEXP_GPIO_BASE + 5)
-#define AKITA_GPIO_IR_ON		(AKITA_IOEXP_GPIO_BASE + 6)
-#define AKITA_GPIO_RESERVED_7		(AKITA_IOEXP_GPIO_BASE + 7)
-
-/* Spitz IRQ Definitions */
-
-#define SPITZ_IRQ_GPIO_KEY_INT        PXA_GPIO_TO_IRQ(SPITZ_GPIO_KEY_INT)
-#define SPITZ_IRQ_GPIO_AC_IN          PXA_GPIO_TO_IRQ(SPITZ_GPIO_AC_IN)
-#define SPITZ_IRQ_GPIO_AK_INT         PXA_GPIO_TO_IRQ(SPITZ_GPIO_AK_INT)
-#define SPITZ_IRQ_GPIO_HP_IN          PXA_GPIO_TO_IRQ(SPITZ_GPIO_HP_IN)
-#define SPITZ_IRQ_GPIO_TP_INT         PXA_GPIO_TO_IRQ(SPITZ_GPIO_TP_INT)
-#define SPITZ_IRQ_GPIO_SYNC           PXA_GPIO_TO_IRQ(SPITZ_GPIO_SYNC)
-#define SPITZ_IRQ_GPIO_ON_KEY         PXA_GPIO_TO_IRQ(SPITZ_GPIO_ON_KEY)
-#define SPITZ_IRQ_GPIO_SWA            PXA_GPIO_TO_IRQ(SPITZ_GPIO_SWA)
-#define SPITZ_IRQ_GPIO_SWB            PXA_GPIO_TO_IRQ(SPITZ_GPIO_SWB)
-#define SPITZ_IRQ_GPIO_BAT_COVER      PXA_GPIO_TO_IRQ(SPITZ_GPIO_BAT_COVER)
-#define SPITZ_IRQ_GPIO_FATAL_BAT      PXA_GPIO_TO_IRQ(SPITZ_GPIO_FATAL_BAT)
-#define SPITZ_IRQ_GPIO_CO             PXA_GPIO_TO_IRQ(SPITZ_GPIO_CO)
-#define SPITZ_IRQ_GPIO_CF_IRQ         PXA_GPIO_TO_IRQ(SPITZ_GPIO_CF_IRQ)
-#define SPITZ_IRQ_GPIO_CF_CD          PXA_GPIO_TO_IRQ(SPITZ_GPIO_CF_CD)
-#define SPITZ_IRQ_GPIO_CF2_IRQ        PXA_GPIO_TO_IRQ(SPITZ_GPIO_CF2_IRQ)
-#define SPITZ_IRQ_GPIO_nSD_INT        PXA_GPIO_TO_IRQ(SPITZ_GPIO_nSD_INT)
-#define SPITZ_IRQ_GPIO_nSD_DETECT     PXA_GPIO_TO_IRQ(SPITZ_GPIO_nSD_DETECT)
-
-/*
- * Shared data structures
- */
-extern struct platform_device spitzssp_device;
-extern struct sharpsl_charger_machinfo spitz_pm_machinfo;
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/timex.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/timex.h
deleted file mode 100644
index af6760a5..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/timex.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * arch/arm/mach-pxa/include/mach/timex.h
- *
- * Author:	Nicolas Pitre
- * Created:	Jun 15, 2001
- * Copyright:	MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/* Various drivers are still using the constant of CLOCK_TICK_RATE, for
- * those drivers to at least work, the definition is provided here.
- *
- * NOTE: this is no longer accurate when multiple processors and boards
- * are selected, newer drivers should not depend on this any more.  Use
- * either the clocksource/clockevent or get this at run-time by calling
- * get_clock_tick_rate() (as defined in generic.c).
- */
-
-#if defined(CONFIG_PXA25x)
-/* PXA250/210 timer base */
-#define CLOCK_TICK_RATE 3686400
-#elif defined(CONFIG_PXA27x)
-/* PXA27x timer base */
-#ifdef CONFIG_MACH_MAINSTONE
-#define CLOCK_TICK_RATE 3249600
-#else
-#define CLOCK_TICK_RATE 3250000
-#endif
-#else
-#define CLOCK_TICK_RATE 3250000
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/tosa.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/tosa.h
deleted file mode 100644
index 2bb0e862..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/tosa.h
+++ /dev/null
@@ -1,200 +0,0 @@
-/*
- * Hardware specific definitions for Sharp SL-C6000x series of PDAs
- *
- * Copyright (c) 2005 Dirk Opfer
- *
- * Based on Sharp's 2.4 kernel patches
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-#ifndef _ASM_ARCH_TOSA_H_
-#define _ASM_ARCH_TOSA_H_ 1
-
-/*  TOSA Chip selects  */
-#define TOSA_LCDC_PHYS		PXA_CS4_PHYS
-/* Internel Scoop */
-#define TOSA_CF_PHYS		(PXA_CS2_PHYS + 0x00800000)
-/* Jacket Scoop */
-#define TOSA_SCOOP_PHYS  	(PXA_CS5_PHYS + 0x00800000)
-
-#define TOSA_NR_IRQS		(IRQ_BOARD_START + TC6393XB_NR_IRQS)
-/*
- * SCOOP2 internal GPIOs
- */
-#define TOSA_SCOOP_GPIO_BASE		PXA_NR_BUILTIN_GPIO
-#define TOSA_SCOOP_PXA_VCORE1		SCOOP_GPCR_PA11
-#define TOSA_GPIO_TC6393XB_REST_IN	(TOSA_SCOOP_GPIO_BASE + 1)
-#define TOSA_GPIO_IR_POWERDWN		(TOSA_SCOOP_GPIO_BASE + 2)
-#define TOSA_GPIO_SD_WP			(TOSA_SCOOP_GPIO_BASE + 3)
-#define TOSA_GPIO_PWR_ON		(TOSA_SCOOP_GPIO_BASE + 4)
-#define TOSA_SCOOP_AUD_PWR_ON		SCOOP_GPCR_PA16
-#define TOSA_GPIO_BT_RESET		(TOSA_SCOOP_GPIO_BASE + 6)
-#define TOSA_GPIO_BT_PWR_EN		(TOSA_SCOOP_GPIO_BASE + 7)
-#define TOSA_SCOOP_AC_IN_OL		SCOOP_GPCR_PA19
-
-/* GPIO Direction   1 : output mode / 0:input mode */
-#define TOSA_SCOOP_IO_DIR     (TOSA_SCOOP_PXA_VCORE1 | \
-		TOSA_SCOOP_AUD_PWR_ON)
-
-/*
- * SCOOP2 jacket GPIOs
- */
-#define TOSA_SCOOP_JC_GPIO_BASE		(PXA_NR_BUILTIN_GPIO + 12)
-#define TOSA_GPIO_BT_LED		(TOSA_SCOOP_JC_GPIO_BASE + 0)
-#define TOSA_GPIO_NOTE_LED		(TOSA_SCOOP_JC_GPIO_BASE + 1)
-#define TOSA_GPIO_CHRG_ERR_LED		(TOSA_SCOOP_JC_GPIO_BASE + 2)
-#define TOSA_GPIO_USB_PULLUP		(TOSA_SCOOP_JC_GPIO_BASE + 3)
-#define TOSA_GPIO_TC6393XB_SUSPEND	(TOSA_SCOOP_JC_GPIO_BASE + 4)
-#define TOSA_GPIO_TC6393XB_L3V_ON	(TOSA_SCOOP_JC_GPIO_BASE + 5)
-#define TOSA_SCOOP_JC_WLAN_DETECT	SCOOP_GPCR_PA17
-#define TOSA_GPIO_WLAN_LED		(TOSA_SCOOP_JC_GPIO_BASE + 7)
-#define TOSA_SCOOP_JC_CARD_LIMIT_SEL	SCOOP_GPCR_PA19
-
-/* GPIO Direction   1 : output mode / 0:input mode */
-#define TOSA_SCOOP_JC_IO_DIR (TOSA_SCOOP_JC_CARD_LIMIT_SEL)
-
-/*
- * TC6393XB GPIOs
- */
-#define TOSA_TC6393XB_GPIO_BASE		(PXA_NR_BUILTIN_GPIO + 2 * 12)
-
-#define TOSA_GPIO_TG_ON			(TOSA_TC6393XB_GPIO_BASE + 0)
-#define TOSA_GPIO_L_MUTE		(TOSA_TC6393XB_GPIO_BASE + 1)
-#define TOSA_GPIO_BL_C20MA		(TOSA_TC6393XB_GPIO_BASE + 3)
-#define TOSA_GPIO_CARD_VCC_ON		(TOSA_TC6393XB_GPIO_BASE + 4)
-#define TOSA_GPIO_CHARGE_OFF		(TOSA_TC6393XB_GPIO_BASE + 6)
-#define TOSA_GPIO_CHARGE_OFF_JC		(TOSA_TC6393XB_GPIO_BASE + 7)
-#define TOSA_GPIO_BAT0_V_ON		(TOSA_TC6393XB_GPIO_BASE + 9)
-#define TOSA_GPIO_BAT1_V_ON		(TOSA_TC6393XB_GPIO_BASE + 10)
-#define TOSA_GPIO_BU_CHRG_ON		(TOSA_TC6393XB_GPIO_BASE + 11)
-#define TOSA_GPIO_BAT_SW_ON		(TOSA_TC6393XB_GPIO_BASE + 12)
-#define TOSA_GPIO_BAT0_TH_ON		(TOSA_TC6393XB_GPIO_BASE + 14)
-#define TOSA_GPIO_BAT1_TH_ON		(TOSA_TC6393XB_GPIO_BASE + 15)
-
-/*
- * Timing Generator
- */
-#define TG_PNLCTL 			0x00
-#define TG_TPOSCTL 			0x01
-#define TG_DUTYCTL 			0x02
-#define TG_GPOSR 			0x03
-#define TG_GPODR1 			0x04
-#define TG_GPODR2 			0x05
-#define TG_PINICTL 			0x06
-#define TG_HPOSCTL 			0x07
-
-/*
- * PXA GPIOs
- */
-#define TOSA_GPIO_POWERON		(0)
-#define TOSA_GPIO_RESET			(1)
-#define TOSA_GPIO_AC_IN			(2)
-#define TOSA_GPIO_RECORD_BTN		(3)
-#define TOSA_GPIO_SYNC			(4)	/* Cradle SYNC Button */
-#define TOSA_GPIO_USB_IN		(5)
-#define TOSA_GPIO_JACKET_DETECT		(7)
-#define TOSA_GPIO_nSD_DETECT		(9)
-#define TOSA_GPIO_nSD_INT		(10)
-#define TOSA_GPIO_TC6393XB_CLK		(11)
-#define TOSA_GPIO_BAT1_CRG		(12)
-#define TOSA_GPIO_CF_CD			(13)
-#define TOSA_GPIO_BAT0_CRG		(14)
-#define TOSA_GPIO_TC6393XB_INT		(15)
-#define TOSA_GPIO_BAT0_LOW		(17)
-#define TOSA_GPIO_TC6393XB_RDY		(18)
-#define TOSA_GPIO_ON_RESET		(19)
-#define TOSA_GPIO_EAR_IN		(20)
-#define TOSA_GPIO_CF_IRQ		(21)	/* CF slot0 Ready */
-#define TOSA_GPIO_ON_KEY		(22)
-#define TOSA_GPIO_VGA_LINE		(27)
-#define TOSA_GPIO_TP_INT		(32)	/* Touch Panel pen down interrupt */
-#define TOSA_GPIO_JC_CF_IRQ		(36)	/* CF slot1 Ready */
-#define TOSA_GPIO_BAT_LOCKED		(38)	/* Battery locked */
-#define TOSA_GPIO_IRDA_TX		(47)
-#define TOSA_GPIO_TG_SPI_SCLK		(81)
-#define TOSA_GPIO_TG_SPI_CS		(82)
-#define TOSA_GPIO_TG_SPI_MOSI		(83)
-#define TOSA_GPIO_BAT1_LOW		(84)
-
-#define TOSA_GPIO_HP_IN			GPIO_EAR_IN
-
-#define TOSA_GPIO_MAIN_BAT_LOW		GPIO_BAT0_LOW
-
-#define TOSA_KEY_STROBE_NUM		(11)
-#define TOSA_KEY_SENSE_NUM		(7)
-
-#define TOSA_GPIO_HIGH_STROBE_BIT	(0xfc000000)
-#define TOSA_GPIO_LOW_STROBE_BIT	(0x0000001f)
-#define TOSA_GPIO_ALL_SENSE_BIT		(0x00000fe0)
-#define TOSA_GPIO_ALL_SENSE_RSHIFT	(5)
-#define TOSA_GPIO_STROBE_BIT(a)		GPIO_bit(58+(a))
-#define TOSA_GPIO_SENSE_BIT(a)		GPIO_bit(69+(a))
-#define TOSA_GAFR_HIGH_STROBE_BIT	(0xfff00000)
-#define TOSA_GAFR_LOW_STROBE_BIT	(0x000003ff)
-#define TOSA_GAFR_ALL_SENSE_BIT		(0x00fffc00)
-#define TOSA_GPIO_KEY_SENSE(a) 		(69+(a))
-#define TOSA_GPIO_KEY_STROBE(a)		(58+(a))
-
-/*
- * Interrupts
- */
-#define TOSA_IRQ_GPIO_WAKEUP        	PXA_GPIO_TO_IRQ(TOSA_GPIO_WAKEUP)
-#define TOSA_IRQ_GPIO_AC_IN         	PXA_GPIO_TO_IRQ(TOSA_GPIO_AC_IN)
-#define TOSA_IRQ_GPIO_RECORD_BTN    	PXA_GPIO_TO_IRQ(TOSA_GPIO_RECORD_BTN)
-#define TOSA_IRQ_GPIO_SYNC          	PXA_GPIO_TO_IRQ(TOSA_GPIO_SYNC)
-#define TOSA_IRQ_GPIO_USB_IN        	PXA_GPIO_TO_IRQ(TOSA_GPIO_USB_IN)
-#define TOSA_IRQ_GPIO_JACKET_DETECT 	PXA_GPIO_TO_IRQ(TOSA_GPIO_JACKET_DETECT)
-#define TOSA_IRQ_GPIO_nSD_INT       	PXA_GPIO_TO_IRQ(TOSA_GPIO_nSD_INT)
-#define TOSA_IRQ_GPIO_nSD_DETECT    	PXA_GPIO_TO_IRQ(TOSA_GPIO_nSD_DETECT)
-#define TOSA_IRQ_GPIO_BAT1_CRG      	PXA_GPIO_TO_IRQ(TOSA_GPIO_BAT1_CRG)
-#define TOSA_IRQ_GPIO_CF_CD         	PXA_GPIO_TO_IRQ(TOSA_GPIO_CF_CD)
-#define TOSA_IRQ_GPIO_BAT0_CRG      	PXA_GPIO_TO_IRQ(TOSA_GPIO_BAT0_CRG)
-#define TOSA_IRQ_GPIO_TC6393XB_INT    	PXA_GPIO_TO_IRQ(TOSA_GPIO_TC6393XB_INT)
-#define TOSA_IRQ_GPIO_BAT0_LOW      	PXA_GPIO_TO_IRQ(TOSA_GPIO_BAT0_LOW)
-#define TOSA_IRQ_GPIO_EAR_IN        	PXA_GPIO_TO_IRQ(TOSA_GPIO_EAR_IN)
-#define TOSA_IRQ_GPIO_CF_IRQ        	PXA_GPIO_TO_IRQ(TOSA_GPIO_CF_IRQ)
-#define TOSA_IRQ_GPIO_ON_KEY        	PXA_GPIO_TO_IRQ(TOSA_GPIO_ON_KEY)
-#define TOSA_IRQ_GPIO_VGA_LINE      	PXA_GPIO_TO_IRQ(TOSA_GPIO_VGA_LINE)
-#define TOSA_IRQ_GPIO_TP_INT        	PXA_GPIO_TO_IRQ(TOSA_GPIO_TP_INT)
-#define TOSA_IRQ_GPIO_JC_CF_IRQ     	PXA_GPIO_TO_IRQ(TOSA_GPIO_JC_CF_IRQ)
-#define TOSA_IRQ_GPIO_BAT_LOCKED    	PXA_GPIO_TO_IRQ(TOSA_GPIO_BAT_LOCKED)
-#define TOSA_IRQ_GPIO_BAT1_LOW      	PXA_GPIO_TO_IRQ(TOSA_GPIO_BAT1_LOW)
-#define TOSA_IRQ_GPIO_KEY_SENSE(a)  	PXA_GPIO_TO_IRQ(69+(a))
-
-#define TOSA_IRQ_GPIO_MAIN_BAT_LOW 	PXA_GPIO_TO_IRQ(TOSA_GPIO_MAIN_BAT_LOW)
-
-#define TOSA_KEY_SYNC		KEY_102ND /* ??? */
-
-#ifndef CONFIG_TOSA_USE_EXT_KEYCODES
-#define TOSA_KEY_RECORD		KEY_YEN
-#define TOSA_KEY_ADDRESSBOOK	KEY_KATAKANA
-#define TOSA_KEY_CANCEL		KEY_ESC
-#define TOSA_KEY_CENTER		KEY_HIRAGANA
-#define TOSA_KEY_OK		KEY_HENKAN
-#define TOSA_KEY_CALENDAR	KEY_KATAKANAHIRAGANA
-#define TOSA_KEY_HOMEPAGE	KEY_HANGEUL
-#define TOSA_KEY_LIGHT		KEY_MUHENKAN
-#define TOSA_KEY_MENU		KEY_HANJA
-#define TOSA_KEY_FN		KEY_RIGHTALT
-#define TOSA_KEY_MAIL		KEY_ZENKAKUHANKAKU
-#else
-#define TOSA_KEY_RECORD		KEY_RECORD
-#define TOSA_KEY_ADDRESSBOOK	KEY_ADDRESSBOOK
-#define TOSA_KEY_CANCEL		KEY_CANCEL
-#define TOSA_KEY_CENTER		KEY_SELECT /* ??? */
-#define TOSA_KEY_OK		KEY_OK
-#define TOSA_KEY_CALENDAR	KEY_CALENDAR
-#define TOSA_KEY_HOMEPAGE	KEY_HOMEPAGE
-#define TOSA_KEY_LIGHT		KEY_KBDILLUMTOGGLE
-#define TOSA_KEY_MENU		KEY_MENU
-#define TOSA_KEY_FN		KEY_FN
-#define TOSA_KEY_MAIL		KEY_MAIL
-#endif
-
-struct spi_device;
-extern int tosa_bl_enable(struct spi_device *spi, int enable);
-
-#endif /* _ASM_ARCH_TOSA_H_ */
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/tosa_bt.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/tosa_bt.h
deleted file mode 100644
index efc3c3d3..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/tosa_bt.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * Tosa bluetooth built-in chip control.
- *
- * Later it may be shared with some other platforms.
- *
- * Copyright (c) 2008 Dmitry Baryshkov
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-#ifndef TOSA_BT_H
-#define TOSA_BT_H
-
-struct tosa_bt_data {
-	int gpio_pwr;
-	int gpio_reset;
-};
-
-#endif
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/trizeps4.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/trizeps4.h
deleted file mode 100644
index d2ca0105..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/trizeps4.h
+++ /dev/null
@@ -1,162 +0,0 @@
-/************************************************************************
- * Include file for TRIZEPS4 SoM and ConXS eval-board
- * Copyright (c) Jürgen Schindele
- * 2006
- ************************************************************************/
-
-/*
- * Includes/Defines
- */
-#ifndef _TRIPEPS4_H_
-#define _TRIPEPS4_H_
-
-/* physical memory regions */
-#define TRIZEPS4_FLASH_PHYS	(PXA_CS0_PHYS)  /* Flash region */
-#define TRIZEPS4_DISK_PHYS	(PXA_CS1_PHYS)  /* Disk On Chip region */
-#define TRIZEPS4_ETH_PHYS	(PXA_CS2_PHYS)  /* Ethernet DM9000 region */
-#define TRIZEPS4_PIC_PHYS	(PXA_CS3_PHYS)	/* Logic chip on ConXS-Board */
-#define TRIZEPS4_SDRAM_BASE	0xa0000000      /* SDRAM region */
-
-				/* Logic on ConXS-board CSFR register*/
-#define TRIZEPS4_CFSR_PHYS	(PXA_CS3_PHYS)
-				/* Logic on ConXS-board BOCR register*/
-#define TRIZEPS4_BOCR_PHYS	(PXA_CS3_PHYS+0x02000000)
-				/* Logic on ConXS-board IRCR register*/
-#define TRIZEPS4_IRCR_PHYS	(PXA_CS3_PHYS+0x02400000)
-				/* Logic on ConXS-board UPSR register*/
-#define TRIZEPS4_UPSR_PHYS	(PXA_CS3_PHYS+0x02800000)
-				/* Logic on ConXS-board DICR register*/
-#define TRIZEPS4_DICR_PHYS	(PXA_CS3_PHYS+0x03800000)
-
-/* virtual memory regions */
-#define TRIZEPS4_DISK_VIRT	0xF0000000	/* Disk On Chip region */
-
-#define TRIZEPS4_PIC_VIRT	0xF0100000	/* not used */
-#define TRIZEPS4_CFSR_VIRT	0xF0100000
-#define TRIZEPS4_BOCR_VIRT	0xF0200000
-#define TRIZEPS4_DICR_VIRT	0xF0300000
-#define TRIZEPS4_IRCR_VIRT	0xF0400000
-#define TRIZEPS4_UPSR_VIRT	0xF0500000
-
-/* size of flash */
-#define TRIZEPS4_FLASH_SIZE	0x02000000	/* Flash size 32 MB */
-
-/* Ethernet Controller Davicom DM9000 */
-#define GPIO_DM9000		101
-#define TRIZEPS4_ETH_IRQ	PXA_GPIO_TO_IRQ(GPIO_DM9000)
-
-/* UCB1400 audio / TS-controller */
-#define GPIO_UCB1400		1
-#define TRIZEPS4_UCB1400_IRQ	PXA_GPIO_TO_IRQ(GPIO_UCB1400)
-
-/* PCMCIA socket Compact Flash */
-#define GPIO_PCD		11		/* PCMCIA Card Detect */
-#define TRIZEPS4_CD_IRQ		PXA_GPIO_TO_IRQ(GPIO_PCD)
-#define GPIO_PRDY		13		/* READY / nINT */
-#define TRIZEPS4_READY_NINT	PXA_GPIO_TO_IRQ(GPIO_PRDY)
-
-/* MMC socket */
-#define GPIO_MMC_DET		12
-#define TRIZEPS4_MMC_IRQ	PXA_GPIO_TO_IRQ(GPIO_MMC_DET)
-
-/* DOC NAND chip */
-#define GPIO_DOC_LOCK           94
-#define GPIO_DOC_IRQ            93
-#define TRIZEPS4_DOC_IRQ        PXA_GPIO_TO_IRQ(GPIO_DOC_IRQ)
-
-/* SPI interface */
-#define GPIO_SPI                53
-#define TRIZEPS4_SPI_IRQ        PXA_GPIO_TO_IRQ(GPIO_SPI)
-
-/* LEDS using tx2 / rx2 */
-#define GPIO_SYS_BUSY_LED	46
-#define GPIO_HEARTBEAT_LED	47
-
-/* Off-module PIC on ConXS board */
-#define GPIO_PIC		0
-#define TRIZEPS4_PIC_IRQ	PXA_GPIO_TO_IRQ(GPIO_PIC)
-
-#ifdef CONFIG_MACH_TRIZEPS_CONXS
-/* for CONXS base board define these registers */
-#define CFSR_P2V(x)	((x) - TRIZEPS4_CFSR_PHYS + TRIZEPS4_CFSR_VIRT)
-#define CFSR_V2P(x)	((x) - TRIZEPS4_CFSR_VIRT + TRIZEPS4_CFSR_PHYS)
-
-#define BCR_P2V(x)	((x) - TRIZEPS4_BOCR_PHYS + TRIZEPS4_BOCR_VIRT)
-#define BCR_V2P(x)	((x) - TRIZEPS4_BOCR_VIRT + TRIZEPS4_BOCR_PHYS)
-
-#define DCR_P2V(x)	((x) - TRIZEPS4_DICR_PHYS + TRIZEPS4_DICR_VIRT)
-#define DCR_V2P(x)	((x) - TRIZEPS4_DICR_VIRT + TRIZEPS4_DICR_PHYS)
-
-#define IRCR_P2V(x)	((x) - TRIZEPS4_IRCR_PHYS + TRIZEPS4_IRCR_VIRT)
-#define IRCR_V2P(x)	((x) - TRIZEPS4_IRCR_VIRT + TRIZEPS4_IRCR_PHYS)
-
-#ifndef __ASSEMBLY__
-static inline unsigned short CFSR_readw(void)
-{
-	/* [Compact Flash Status Register] is read only */
-	return *((unsigned short *)CFSR_P2V(0x0C000000));
-}
-static inline void BCR_writew(unsigned short value)
-{
-	/* [Board Control Regsiter] is write only */
-	*((unsigned short *)BCR_P2V(0x0E000000)) = value;
-}
-static inline void DCR_writew(unsigned short value)
-{
-	/* [Display Control Register] is write only */
-	*((unsigned short *)DCR_P2V(0x0E000000)) = value;
-}
-static inline void IRCR_writew(unsigned short value)
-{
-	/* [InfraRed data Control Register] is write only */
-	*((unsigned short *)IRCR_P2V(0x0E000000)) = value;
-}
-#else
-#define ConXS_CFSR		CFSR_P2V(0x0C000000)
-#define ConXS_BCR		BCR_P2V(0x0E000000)
-#define ConXS_DCR		DCR_P2V(0x0F800000)
-#define ConXS_IRCR		IRCR_P2V(0x0F800000)
-#endif
-#else
-/* for whatever baseboard define function registers */
-static inline unsigned short CFSR_readw(void)
-{
-	return 0;
-}
-static inline void BCR_writew(unsigned short value)
-{
-	;
-}
-static inline void DCR_writew(unsigned short value)
-{
-	;
-}
-static inline void IRCR_writew(unsigned short value)
-{
-	;
-}
-#endif	/* CONFIG_MACH_TRIZEPS_CONXS */
-
-#define ConXS_CFSR_BVD_MASK	0x0003
-#define ConXS_CFSR_BVD1		(1 << 0)
-#define ConXS_CFSR_BVD2		(1 << 1)
-#define ConXS_CFSR_VS_MASK	0x000C
-#define ConXS_CFSR_VS1		(1 << 2)
-#define ConXS_CFSR_VS2		(1 << 3)
-#define ConXS_CFSR_VS_5V	(0x3 << 2)
-#define ConXS_CFSR_VS_3V3	0x0
-
-#define ConXS_BCR_S0_POW_EN0	(1 << 0)
-#define ConXS_BCR_S0_POW_EN1	(1 << 1)
-#define ConXS_BCR_L_DISP	(1 << 4)
-#define ConXS_BCR_CF_BUF_EN	(1 << 5)
-#define ConXS_BCR_CF_RESET	(1 << 7)
-#define ConXS_BCR_S0_VCC_3V3	0x1
-#define ConXS_BCR_S0_VCC_5V0	0x2
-#define ConXS_BCR_S0_VPP_12V	0x4
-#define ConXS_BCR_S0_VPP_3V3	0x8
-
-#define ConXS_IRCR_MODE		(1 << 0)
-#define ConXS_IRCR_SD		(1 << 1)
-
-#endif /* _TRIPEPS4_H_ */
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/udc.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/udc.h
deleted file mode 100644
index 2f82332e..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/udc.h
+++ /dev/null
@@ -1,8 +0,0 @@
-/*
- * arch/arm/mach-pxa/include/mach/udc.h
- *
- */
-#include <asm/mach/udc_pxa2xx.h>
-
-extern void pxa_set_udc_info(struct pxa2xx_udc_mach_info *info);
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/uncompress.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/uncompress.h
deleted file mode 100644
index 5519a34b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/uncompress.h
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
- * arch/arm/mach-pxa/include/mach/uncompress.h
- *
- * Author:	Nicolas Pitre
- * Copyright:	(C) 2001 MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/serial_reg.h>
-#include <asm/mach-types.h>
-
-#define FFUART_BASE	(0x40100000)
-#define BTUART_BASE	(0x40200000)
-#define STUART_BASE	(0x40700000)
-
-unsigned long uart_base;
-unsigned int uart_shift;
-unsigned int uart_is_pxa;
-
-static inline unsigned char uart_read(int offset)
-{
-	return *(volatile unsigned char *)(uart_base + (offset << uart_shift));
-}
-
-static inline void uart_write(unsigned char val, int offset)
-{
-	*(volatile unsigned char *)(uart_base + (offset << uart_shift)) = val;
-}
-
-static inline int uart_is_enabled(void)
-{
-	/* assume enabled by default for non-PXA uarts */
-	return uart_is_pxa ? uart_read(UART_IER) & UART_IER_UUE : 1;
-}
-
-static inline void putc(char c)
-{
-	if (!uart_is_enabled())
-		return;
-
-	while (!(uart_read(UART_LSR) & UART_LSR_THRE))
-		barrier();
-
-	uart_write(c, UART_TX);
-}
-
-/*
- * This does not append a newline
- */
-static inline void flush(void)
-{
-}
-
-static inline void arch_decomp_setup(void)
-{
-	/* initialize to default */
-	uart_base = FFUART_BASE;
-	uart_shift = 2;
-	uart_is_pxa = 1;
-
-	if (machine_is_littleton() || machine_is_intelmote2()
-	    || machine_is_csb726() || machine_is_stargate2()
-	    || machine_is_cm_x300() || machine_is_balloon3())
-		uart_base = STUART_BASE;
-
-	if (machine_is_arcom_zeus()) {
-		uart_base = 0x10000000;	/* nCS4 */
-		uart_shift = 1;
-		uart_is_pxa = 0;
-	}
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_wdog()
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/viper.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/viper.h
deleted file mode 100644
index 5f5fbf1f..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/viper.h
+++ /dev/null
@@ -1,94 +0,0 @@
-/*
- * arch/arm/mach-pxa/include/mach/viper.h
- *
- * Author:	Ian Campbell
- * Created:	Feb 03, 2003
- * Copyright:	Arcom Control Systems.
- *
- * Maintained by Marc Zyngier <maz@misterjones.org>
- *			      <marc.zyngier@altran.com>
- *
- * Created based on lubbock.h:
- *  Author:	Nicolas Pitre
- *  Created:	Jun 15, 2001
- *  Copyright:	MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef ARCH_VIPER_H
-#define ARCH_VIPER_H
-
-#define VIPER_BOOT_PHYS		PXA_CS0_PHYS
-#define VIPER_FLASH_PHYS	PXA_CS1_PHYS
-#define VIPER_ETH_PHYS		PXA_CS2_PHYS
-#define VIPER_USB_PHYS		PXA_CS3_PHYS
-#define VIPER_ETH_DATA_PHYS	PXA_CS4_PHYS
-#define VIPER_CPLD_PHYS		PXA_CS5_PHYS
-
-#define VIPER_CPLD_BASE		(0xf0000000)
-#define VIPER_PC104IO_BASE	(0xf1000000)
-#define VIPER_USB_BASE		(0xf1800000)
-
-#define VIPER_ETH_GPIO		(0)
-#define VIPER_CPLD_GPIO		(1)
-#define VIPER_USB_GPIO		(2)
-#define VIPER_UARTA_GPIO	(4)
-#define VIPER_UARTB_GPIO	(3)
-#define VIPER_CF_CD_GPIO	(32)
-#define VIPER_CF_RDY_GPIO	(8)
-#define VIPER_BCKLIGHT_EN_GPIO	(9)
-#define VIPER_LCD_EN_GPIO	(10)
-#define VIPER_PSU_DATA_GPIO	(6)
-#define VIPER_PSU_CLK_GPIO	(11)
-#define VIPER_UART_SHDN_GPIO	(12)
-#define VIPER_BRIGHTNESS_GPIO	(16)
-#define VIPER_PSU_nCS_LD_GPIO	(19)
-#define VIPER_UPS_GPIO		(20)
-#define VIPER_CF_POWER_GPIO	(82)
-#define VIPER_TPM_I2C_SDA_GPIO	(26)
-#define VIPER_TPM_I2C_SCL_GPIO	(27)
-#define VIPER_RTC_I2C_SDA_GPIO	(83)
-#define VIPER_RTC_I2C_SCL_GPIO	(84)
-
-#define VIPER_CPLD_P2V(x)	((x) - VIPER_CPLD_PHYS + VIPER_CPLD_BASE)
-#define VIPER_CPLD_V2P(x)	((x) - VIPER_CPLD_BASE + VIPER_CPLD_PHYS)
-
-#ifndef __ASSEMBLY__
-#  define __VIPER_CPLD_REG(x)	(*((volatile u16 *)VIPER_CPLD_P2V(x)))
-#endif
-
-/* board level registers in the CPLD: (offsets from CPLD_BASE) ... */
-
-/* ... Physical addresses */
-#define _VIPER_LO_IRQ_STATUS	(VIPER_CPLD_PHYS + 0x100000)
-#define _VIPER_ICR_PHYS		(VIPER_CPLD_PHYS + 0x100002)
-#define _VIPER_HI_IRQ_STATUS	(VIPER_CPLD_PHYS + 0x100004)
-#define _VIPER_VERSION_PHYS	(VIPER_CPLD_PHYS + 0x100006)
-#define VIPER_UARTA_PHYS	(VIPER_CPLD_PHYS + 0x300010)
-#define VIPER_UARTB_PHYS	(VIPER_CPLD_PHYS + 0x300000)
-#define _VIPER_SRAM_BASE	(VIPER_CPLD_PHYS + 0x800000)
-
-/* ... Virtual addresses */
-#define VIPER_LO_IRQ_STATUS	__VIPER_CPLD_REG(_VIPER_LO_IRQ_STATUS)
-#define VIPER_HI_IRQ_STATUS	__VIPER_CPLD_REG(_VIPER_HI_IRQ_STATUS)
-#define VIPER_VERSION		__VIPER_CPLD_REG(_VIPER_VERSION_PHYS)
-#define VIPER_ICR		__VIPER_CPLD_REG(_VIPER_ICR_PHYS)
-
-/* Decode VIPER_VERSION register */
-#define VIPER_CPLD_REVISION(x)	(((x) >> 5) & 0x7)
-#define VIPER_BOARD_VERSION(x)	(((x) >> 3) & 0x3)
-#define VIPER_BOARD_ISSUE(x)	(((x) >> 0) & 0x7)
-
-/* Interrupt and Configuration Register (VIPER_ICR) */
-/* This is a write only register. Only CF_RST is used under Linux */
-
-#define VIPER_ICR_RETRIG	(1 << 0)
-#define VIPER_ICR_AUTO_CLR	(1 << 1)
-#define VIPER_ICR_R_DIS		(1 << 2)
-#define VIPER_ICR_CF_RST	(1 << 3)
-
-#endif
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/vpac270.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/vpac270.h
deleted file mode 100644
index 7bfa3dd0..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/vpac270.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * GPIOs and interrupts for Voipac PXA270
- *
- * Copyright (C) 2010
- * Marek Vasut <marek.vasut@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef _INCLUDE_VPAC270_H_
-#define _INCLUDE_VPAC270_H_
-
-#define	GPIO1_VPAC270_USER_BTN		1
-
-#define	GPIO15_VPAC270_LED_ORANGE	15
-
-#define	GPIO81_VPAC270_BKL_ON		81
-#define	GPIO83_VPAC270_NL_ON		83
-
-#define	GPIO52_VPAC270_SD_READONLY	52
-#define	GPIO53_VPAC270_SD_DETECT_N	53
-
-#define	GPIO84_VPAC270_PCMCIA_CD	84
-#define	GPIO35_VPAC270_PCMCIA_RDY	35
-#define	GPIO107_VPAC270_PCMCIA_PPEN	107
-#define	GPIO11_VPAC270_PCMCIA_RESET	11
-#define	GPIO17_VPAC270_CF_CD		17
-#define	GPIO12_VPAC270_CF_RDY		12
-#define	GPIO16_VPAC270_CF_RESET		16
-
-#define	GPIO41_VPAC270_UDC_DETECT	41
-
-#define	GPIO114_VPAC270_ETH_IRQ		114
-
-#define	GPIO36_VPAC270_IDE_IRQ		36
-
-#define	GPIO113_VPAC270_TS_IRQ		113
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/z2.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/z2.h
deleted file mode 100644
index 7b0f71ef..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/z2.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- *  arch/arm/mach-pxa/include/mach/z2.h
- *
- *  Author: Ken McGuire
- *  Created: Feb 6, 2009
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef ASM_ARCH_ZIPIT2_H
-#define ASM_ARCH_ZIPIT2_H
-
-/* LEDs */
-#define	GPIO10_ZIPITZ2_LED_WIFI		10
-#define	GPIO85_ZIPITZ2_LED_CHARGED	85
-#define	GPIO83_ZIPITZ2_LED_CHARGING	83
-
-/* SD/MMC */
-#define	GPIO96_ZIPITZ2_SD_DETECT	96
-
-/* GPIO Buttons */
-#define	GPIO1_ZIPITZ2_POWER_BUTTON	1
-#define	GPIO98_ZIPITZ2_LID_BUTTON	98
-
-/* Libertas GSPI8686 WiFi */
-#define	GPIO14_ZIPITZ2_WIFI_POWER	14
-#define	GPIO24_ZIPITZ2_WIFI_CS		24
-#define	GPIO36_ZIPITZ2_WIFI_IRQ		36
-
-/* LCD */
-#define	GPIO19_ZIPITZ2_LCD_RESET	19
-#define	GPIO88_ZIPITZ2_LCD_CS		88
-
-/* MISC GPIOs */
-#define	GPIO0_ZIPITZ2_AC_DETECT		0
-#define GPIO37_ZIPITZ2_HEADSET_DETECT	37
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/zeus.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/zeus.h
deleted file mode 100644
index 56024f81..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/zeus.h
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
- *  arch/arm/mach-pxa/include/mach/zeus.h
- *
- *  Author:	David Vrabel
- *  Created:	Sept 28, 2005
- *  Copyright:	Arcom Control Systems Ltd.
- *
- *  Maintained by: Marc Zyngier <maz@misterjones.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef _MACH_ZEUS_H
-#define _MACH_ZEUS_H
-
-#define ZEUS_NR_IRQS		(IRQ_BOARD_START + 48)
-
-/* Physical addresses */
-#define ZEUS_FLASH_PHYS		PXA_CS0_PHYS
-#define ZEUS_ETH0_PHYS		PXA_CS1_PHYS
-#define ZEUS_ETH1_PHYS		PXA_CS2_PHYS
-#define ZEUS_CPLD_PHYS		(PXA_CS4_PHYS+0x2000000)
-#define ZEUS_SRAM_PHYS		PXA_CS5_PHYS
-#define ZEUS_PC104IO_PHYS	(0x30000000)
-
-#define ZEUS_CPLD_VERSION_PHYS	(ZEUS_CPLD_PHYS + 0x00000000)
-#define ZEUS_CPLD_ISA_IRQ_PHYS	(ZEUS_CPLD_PHYS + 0x00800000)
-#define ZEUS_CPLD_CONTROL_PHYS	(ZEUS_CPLD_PHYS + 0x01000000)
-#define ZEUS_CPLD_EXTWDOG_PHYS	(ZEUS_CPLD_PHYS + 0x01800000)
-
-/* GPIOs */
-#define ZEUS_AC97_GPIO		0
-#define ZEUS_WAKEUP_GPIO	1
-#define ZEUS_UARTA_GPIO		9
-#define ZEUS_UARTB_GPIO		10
-#define ZEUS_UARTC_GPIO		12
-#define ZEUS_UARTD_GPIO		11
-#define ZEUS_ETH0_GPIO		14
-#define ZEUS_ISA_GPIO		17
-#define ZEUS_BKLEN_GPIO		19
-#define ZEUS_USB2_PWREN_GPIO	22
-#define ZEUS_PTT_GPIO		27
-#define ZEUS_CF_CD_GPIO         35
-#define ZEUS_MMC_WP_GPIO        52
-#define ZEUS_MMC_CD_GPIO        53
-#define ZEUS_EXTGPIO_GPIO	91
-#define ZEUS_CF_PWEN_GPIO       97
-#define ZEUS_CF_RDY_GPIO        99
-#define ZEUS_LCD_EN_GPIO	101
-#define ZEUS_ETH1_GPIO		113
-#define ZEUS_CAN_GPIO		116
-
-#define ZEUS_EXT0_GPIO_BASE	128
-#define ZEUS_EXT1_GPIO_BASE	160
-#define ZEUS_USER_GPIO_BASE	192
-
-#define ZEUS_EXT0_GPIO(x)	(ZEUS_EXT0_GPIO_BASE + (x))
-#define ZEUS_EXT1_GPIO(x)	(ZEUS_EXT1_GPIO_BASE + (x))
-#define ZEUS_USER_GPIO(x)	(ZEUS_USER_GPIO_BASE + (x))
-
-#define	ZEUS_CAN_SHDN_GPIO	ZEUS_EXT1_GPIO(2)
-
-/*
- * CPLD registers:
- * Only 4 registers, but spread over a 32MB address space.
- * Be gentle, and remap that over 32kB...
- */
-
-#define ZEUS_CPLD		IOMEM(0xf0000000)
-#define ZEUS_CPLD_VERSION	(ZEUS_CPLD + 0x0000)
-#define ZEUS_CPLD_ISA_IRQ	(ZEUS_CPLD + 0x1000)
-#define ZEUS_CPLD_CONTROL	(ZEUS_CPLD + 0x2000)
-
-/* CPLD register bits */
-#define ZEUS_CPLD_CONTROL_CF_RST        0x01
-
-#define ZEUS_PC104IO		IOMEM(0xf1000000)
-
-#define ZEUS_SRAM_SIZE		(256 * 1024)
-
-#endif
-
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/zylonite.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/zylonite.h
deleted file mode 100644
index ecca976f..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/zylonite.h
+++ /dev/null
@@ -1,42 +0,0 @@
-#ifndef __ASM_ARCH_ZYLONITE_H
-#define __ASM_ARCH_ZYLONITE_H
-
-#define ZYLONITE_ETH_PHYS	0x14000000
-
-#define EXT_GPIO(x)		(128 + (x))
-
-#define ZYLONITE_NR_IRQS	(IRQ_BOARD_START + 32)
-
-/* the following variables are processor specific and initialized
- * by the corresponding zylonite_pxa3xx_init()
- */
-extern int gpio_eth_irq;
-extern int gpio_debug_led1;
-extern int gpio_debug_led2;
-
-extern int wm9713_irq;
-
-extern int lcd_id;
-extern int lcd_orientation;
-
-#ifdef CONFIG_MACH_ZYLONITE300
-extern void zylonite_pxa300_init(void);
-#else
-static inline void zylonite_pxa300_init(void)
-{
-	if (cpu_is_pxa300() || cpu_is_pxa310())
-		panic("%s: PXA300/PXA310 not supported\n", __func__);
-}
-#endif
-
-#ifdef CONFIG_MACH_ZYLONITE320
-extern void zylonite_pxa320_init(void);
-#else
-static inline void zylonite_pxa320_init(void)
-{
-	if (cpu_is_pxa320())
-		panic("%s: PXA320 not supported\n", __func__);
-}
-#endif
-
-#endif /* __ASM_ARCH_ZYLONITE_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/irq.c b/ANDROID_3.4.5/arch/arm/mach-pxa/irq.c
deleted file mode 100644
index 5dae15ea..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/irq.c
+++ /dev/null
@@ -1,204 +0,0 @@
-/*
- *  linux/arch/arm/mach-pxa/irq.c
- *
- *  Generic PXA IRQ handling
- *
- *  Author:	Nicolas Pitre
- *  Created:	Jun 15, 2001
- *  Copyright:	MontaVista Software Inc.
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/syscore_ops.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-
-#include <asm/exception.h>
-
-#include <mach/hardware.h>
-#include <mach/irqs.h>
-
-#include "generic.h"
-
-#define IRQ_BASE		io_p2v(0x40d00000)
-
-#define ICIP			(0x000)
-#define ICMR			(0x004)
-#define ICLR			(0x008)
-#define ICFR			(0x00c)
-#define ICPR			(0x010)
-#define ICCR			(0x014)
-#define ICHP			(0x018)
-#define IPR(i)			(((i) < 32) ? (0x01c + ((i) << 2)) :		\
-				((i) < 64) ? (0x0b0 + (((i) - 32) << 2)) :	\
-				      (0x144 + (((i) - 64) << 2)))
-#define ICHP_VAL_IRQ		(1 << 31)
-#define ICHP_IRQ(i)		(((i) >> 16) & 0x7fff)
-#define IPR_VALID		(1 << 31)
-#define IRQ_BIT(n)		(((n) - PXA_IRQ(0)) & 0x1f)
-
-#define MAX_INTERNAL_IRQS	128
-
-/*
- * This is for peripheral IRQs internal to the PXA chip.
- */
-
-static int pxa_internal_irq_nr;
-
-static inline int cpu_has_ipr(void)
-{
-	return !cpu_is_pxa25x();
-}
-
-static inline void __iomem *irq_base(int i)
-{
-	static unsigned long phys_base[] = {
-		0x40d00000,
-		0x40d0009c,
-		0x40d00130,
-	};
-
-	return io_p2v(phys_base[i]);
-}
-
-void pxa_mask_irq(struct irq_data *d)
-{
-	void __iomem *base = irq_data_get_irq_chip_data(d);
-	uint32_t icmr = __raw_readl(base + ICMR);
-
-	icmr &= ~(1 << IRQ_BIT(d->irq));
-	__raw_writel(icmr, base + ICMR);
-}
-
-void pxa_unmask_irq(struct irq_data *d)
-{
-	void __iomem *base = irq_data_get_irq_chip_data(d);
-	uint32_t icmr = __raw_readl(base + ICMR);
-
-	icmr |= 1 << IRQ_BIT(d->irq);
-	__raw_writel(icmr, base + ICMR);
-}
-
-static struct irq_chip pxa_internal_irq_chip = {
-	.name		= "SC",
-	.irq_ack	= pxa_mask_irq,
-	.irq_mask	= pxa_mask_irq,
-	.irq_unmask	= pxa_unmask_irq,
-};
-
-asmlinkage void __exception_irq_entry icip_handle_irq(struct pt_regs *regs)
-{
-	uint32_t icip, icmr, mask;
-
-	do {
-		icip = __raw_readl(IRQ_BASE + ICIP);
-		icmr = __raw_readl(IRQ_BASE + ICMR);
-		mask = icip & icmr;
-
-		if (mask == 0)
-			break;
-
-		handle_IRQ(PXA_IRQ(fls(mask) - 1), regs);
-	} while (1);
-}
-
-asmlinkage void __exception_irq_entry ichp_handle_irq(struct pt_regs *regs)
-{
-	uint32_t ichp;
-
-	do {
-		__asm__ __volatile__("mrc p6, 0, %0, c5, c0, 0\n": "=r"(ichp));
-
-		if ((ichp & ICHP_VAL_IRQ) == 0)
-			break;
-
-		handle_IRQ(PXA_IRQ(ICHP_IRQ(ichp)), regs);
-	} while (1);
-}
-
-void __init pxa_init_irq(int irq_nr, int (*fn)(struct irq_data *, unsigned int))
-{
-	int irq, i, n;
-
-	BUG_ON(irq_nr > MAX_INTERNAL_IRQS);
-
-	pxa_internal_irq_nr = irq_nr;
-
-	for (n = 0; n < irq_nr; n += 32) {
-		void __iomem *base = irq_base(n >> 5);
-
-		__raw_writel(0, base + ICMR);	/* disable all IRQs */
-		__raw_writel(0, base + ICLR);	/* all IRQs are IRQ, not FIQ */
-		for (i = n; (i < (n + 32)) && (i < irq_nr); i++) {
-			/* initialize interrupt priority */
-			if (cpu_has_ipr())
-				__raw_writel(i | IPR_VALID, IRQ_BASE + IPR(i));
-
-			irq = PXA_IRQ(i);
-			irq_set_chip_and_handler(irq, &pxa_internal_irq_chip,
-						 handle_level_irq);
-			irq_set_chip_data(irq, base);
-			set_irq_flags(irq, IRQF_VALID);
-		}
-	}
-
-	/* only unmasked interrupts kick us out of idle */
-	__raw_writel(1, irq_base(0) + ICCR);
-
-	pxa_internal_irq_chip.irq_set_wake = fn;
-}
-
-#ifdef CONFIG_PM
-static unsigned long saved_icmr[MAX_INTERNAL_IRQS/32];
-static unsigned long saved_ipr[MAX_INTERNAL_IRQS];
-
-static int pxa_irq_suspend(void)
-{
-	int i;
-
-	for (i = 0; i < pxa_internal_irq_nr / 32; i++) {
-		void __iomem *base = irq_base(i);
-
-		saved_icmr[i] = __raw_readl(base + ICMR);
-		__raw_writel(0, base + ICMR);
-	}
-
-	if (cpu_has_ipr()) {
-		for (i = 0; i < pxa_internal_irq_nr; i++)
-			saved_ipr[i] = __raw_readl(IRQ_BASE + IPR(i));
-	}
-
-	return 0;
-}
-
-static void pxa_irq_resume(void)
-{
-	int i;
-
-	for (i = 0; i < pxa_internal_irq_nr / 32; i++) {
-		void __iomem *base = irq_base(i);
-
-		__raw_writel(saved_icmr[i], base + ICMR);
-		__raw_writel(0, base + ICLR);
-	}
-
-	if (cpu_has_ipr())
-		for (i = 0; i < pxa_internal_irq_nr; i++)
-			__raw_writel(saved_ipr[i], IRQ_BASE + IPR(i));
-
-	__raw_writel(1, IRQ_BASE + ICCR);
-}
-#else
-#define pxa_irq_suspend		NULL
-#define pxa_irq_resume		NULL
-#endif
-
-struct syscore_ops pxa_irq_syscore_ops = {
-	.suspend	= pxa_irq_suspend,
-	.resume		= pxa_irq_resume,
-};
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/leds-idp.c b/ANDROID_3.4.5/arch/arm/mach-pxa/leds-idp.c
deleted file mode 100644
index 06b06002..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/leds-idp.c
+++ /dev/null
@@ -1,115 +0,0 @@
-/*
- * linux/arch/arm/mach-pxa/leds-idp.c
- *
- * Copyright (C) 2000 John Dorsey <john+@cs.cmu.edu>
- *
- * Copyright (c) 2001 Jeff Sutherland <jeffs@accelent.com>
- *
- * Original (leds-footbridge.c) by Russell King
- *
- * Macros for actual LED manipulation should be in machine specific
- * files in this 'mach' directory.
- */
-
-
-#include <linux/init.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-
-#include <mach/pxa25x.h>
-#include <mach/idp.h>
-
-#include "leds.h"
-
-#define LED_STATE_ENABLED	1
-#define LED_STATE_CLAIMED	2
-
-static unsigned int led_state;
-static unsigned int hw_led_state;
-
-void idp_leds_event(led_event_t evt)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-
-	switch (evt) {
-	case led_start:
-		hw_led_state = IDP_HB_LED | IDP_BUSY_LED;
-		led_state = LED_STATE_ENABLED;
-		break;
-
-	case led_stop:
-		led_state &= ~LED_STATE_ENABLED;
-		break;
-
-	case led_claim:
-		led_state |= LED_STATE_CLAIMED;
-		hw_led_state = IDP_HB_LED | IDP_BUSY_LED;
-		break;
-
-	case led_release:
-		led_state &= ~LED_STATE_CLAIMED;
-		hw_led_state = IDP_HB_LED | IDP_BUSY_LED;
-		break;
-
-#ifdef CONFIG_LEDS_TIMER
-	case led_timer:
-		if (!(led_state & LED_STATE_CLAIMED))
-			hw_led_state ^= IDP_HB_LED;
-		break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
-	case led_idle_start:
-		if (!(led_state & LED_STATE_CLAIMED))
-			hw_led_state &= ~IDP_BUSY_LED;
-		break;
-
-	case led_idle_end:
-		if (!(led_state & LED_STATE_CLAIMED))
-			hw_led_state |= IDP_BUSY_LED;
-		break;
-#endif
-
-	case led_halted:
-		break;
-
-	case led_green_on:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state |= IDP_HB_LED;
-		break;
-
-	case led_green_off:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state &= ~IDP_HB_LED;
-		break;
-
-	case led_amber_on:
-		break;
-
-	case led_amber_off:
-		break;
-
-	case led_red_on:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state |= IDP_BUSY_LED;
-		break;
-
-	case led_red_off:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state &= ~IDP_BUSY_LED;
-		break;
-
-	default:
-		break;
-	}
-
-	if  (led_state & LED_STATE_ENABLED)
-		IDP_CPLD_LED_CONTROL = ( (IDP_CPLD_LED_CONTROL | IDP_LEDS_MASK) & ~hw_led_state);
-	else
-		IDP_CPLD_LED_CONTROL |= IDP_LEDS_MASK;
-
-	local_irq_restore(flags);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/leds-lubbock.c b/ANDROID_3.4.5/arch/arm/mach-pxa/leds-lubbock.c
deleted file mode 100644
index 0bd85c88..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/leds-lubbock.c
+++ /dev/null
@@ -1,124 +0,0 @@
-/*
- * linux/arch/arm/mach-pxa/leds-lubbock.c
- *
- * Copyright (C) 2000 John Dorsey <john+@cs.cmu.edu>
- *
- * Copyright (c) 2001 Jeff Sutherland <jeffs@accelent.com>
- *
- * Original (leds-footbridge.c) by Russell King
- *
- * Major surgery on April 2004 by Nicolas Pitre for less global
- * namespace collision.  Mostly adapted the Mainstone version.
- */
-
-#include <linux/init.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-#include <mach/pxa25x.h>
-#include <mach/lubbock.h>
-
-#include "leds.h"
-
-/*
- * 8 discrete leds available for general use:
- *
- * Note: bits [15-8] are used to enable/blank the 8 7 segment hex displays
- * so be sure to not monkey with them here.
- */
-
-#define D28			(1 << 0)
-#define D27			(1 << 1)
-#define D26			(1 << 2)
-#define D25			(1 << 3)
-#define D24			(1 << 4)
-#define D23			(1 << 5)
-#define D22			(1 << 6)
-#define D21			(1 << 7)
-
-#define LED_STATE_ENABLED	1
-#define LED_STATE_CLAIMED	2
-
-static unsigned int led_state;
-static unsigned int hw_led_state;
-
-void lubbock_leds_event(led_event_t evt)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-
-	switch (evt) {
-	case led_start:
-		hw_led_state = 0;
-		led_state = LED_STATE_ENABLED;
-		break;
-
-	case led_stop:
-		led_state &= ~LED_STATE_ENABLED;
-		break;
-
-	case led_claim:
-		led_state |= LED_STATE_CLAIMED;
-		hw_led_state = 0;
-		break;
-
-	case led_release:
-		led_state &= ~LED_STATE_CLAIMED;
-		hw_led_state = 0;
-		break;
-
-#ifdef CONFIG_LEDS_TIMER
-	case led_timer:
-		hw_led_state ^= D26;
-		break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
-	case led_idle_start:
-		hw_led_state &= ~D27;
-		break;
-
-	case led_idle_end:
-		hw_led_state |= D27;
-		break;
-#endif
-
-	case led_halted:
-		break;
-
-	case led_green_on:
-		hw_led_state |= D21;
-		break;
-
-	case led_green_off:
-		hw_led_state &= ~D21;
-		break;
-
-	case led_amber_on:
-		hw_led_state |= D22;
-		break;
-
-	case led_amber_off:
-		hw_led_state &= ~D22;
-		break;
-
-	case led_red_on:
-		hw_led_state |= D23;
-		break;
-
-	case led_red_off:
-		hw_led_state &= ~D23;
-		break;
-
-	default:
-		break;
-	}
-
-	if  (led_state & LED_STATE_ENABLED)
-		LUB_DISC_BLNK_LED = (LUB_DISC_BLNK_LED | 0xff) & ~hw_led_state;
-	else
-		LUB_DISC_BLNK_LED |= 0xff;
-
-	local_irq_restore(flags);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/leds-mainstone.c b/ANDROID_3.4.5/arch/arm/mach-pxa/leds-mainstone.c
deleted file mode 100644
index 4058ab34..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/leds-mainstone.c
+++ /dev/null
@@ -1,119 +0,0 @@
-/*
- * linux/arch/arm/mach-pxa/leds-mainstone.c
- *
- * Author:     Nicolas Pitre
- * Created:    Nov 05, 2002
- * Copyright:  MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-
-#include <mach/pxa27x.h>
-#include <mach/mainstone.h>
-
-#include "leds.h"
-
-
-/* 8 discrete leds available for general use: */
-#define D28			(1 << 0)
-#define D27			(1 << 1)
-#define D26			(1 << 2)
-#define D25			(1 << 3)
-#define D24			(1 << 4)
-#define D23			(1 << 5)
-#define D22			(1 << 6)
-#define D21			(1 << 7)
-
-#define LED_STATE_ENABLED	1
-#define LED_STATE_CLAIMED	2
-
-static unsigned int led_state;
-static unsigned int hw_led_state;
-
-void mainstone_leds_event(led_event_t evt)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-
-	switch (evt) {
-	case led_start:
-		hw_led_state = 0;
-		led_state = LED_STATE_ENABLED;
-		break;
-
-	case led_stop:
-		led_state &= ~LED_STATE_ENABLED;
-		break;
-
-	case led_claim:
-		led_state |= LED_STATE_CLAIMED;
-		hw_led_state = 0;
-		break;
-
-	case led_release:
-		led_state &= ~LED_STATE_CLAIMED;
-		hw_led_state = 0;
-		break;
-
-#ifdef CONFIG_LEDS_TIMER
-	case led_timer:
-		hw_led_state ^= D26;
-		break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
-	case led_idle_start:
-		hw_led_state &= ~D27;
-		break;
-
-	case led_idle_end:
-		hw_led_state |= D27;
-		break;
-#endif
-
-	case led_halted:
-		break;
-
-	case led_green_on:
-		hw_led_state |= D21;
-		break;
-
-	case led_green_off:
-		hw_led_state &= ~D21;
-		break;
-
-	case led_amber_on:
-		hw_led_state |= D22;
-		break;
-
-	case led_amber_off:
-		hw_led_state &= ~D22;
-		break;
-
-	case led_red_on:
-		hw_led_state |= D23;
-		break;
-
-	case led_red_off:
-		hw_led_state &= ~D23;
-		break;
-
-	default:
-		break;
-	}
-
-	if  (led_state & LED_STATE_ENABLED)
-		MST_LEDCTRL = (MST_LEDCTRL | 0xff) & ~hw_led_state;
-	else
-		MST_LEDCTRL |= 0xff;
-
-	local_irq_restore(flags);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/leds.c b/ANDROID_3.4.5/arch/arm/mach-pxa/leds.c
deleted file mode 100644
index bbe4d5f6..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/leds.c
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * linux/arch/arm/mach-pxa/leds.c
- *
- * xscale LEDs dispatcher
- *
- * Copyright (C) 2001 Nicolas Pitre
- *
- * Copyright (c) 2001 Jeff Sutherland, Accelent Systems Inc.
- */
-#include <linux/compiler.h>
-#include <linux/init.h>
-
-#include <asm/leds.h>
-#include <asm/mach-types.h>
-
-#include "leds.h"
-
-static int __init
-pxa_leds_init(void)
-{
-	if (machine_is_lubbock())
-		leds_event = lubbock_leds_event;
-	if (machine_is_mainstone())
-		leds_event = mainstone_leds_event;
-	if (machine_is_pxa_idp())
-		leds_event = idp_leds_event;
-
-	leds_event(led_start);
-	return 0;
-}
-
-core_initcall(pxa_leds_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/leds.h b/ANDROID_3.4.5/arch/arm/mach-pxa/leds.h
deleted file mode 100644
index 7f0dfe01..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/leds.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * arch/arm/mach-pxa/leds.h
- *
- * Copyright (c) 2001 Jeff Sutherland, Accelent Systems Inc.
- *
- * blinky lights for various PXA-based systems:
- *
- */
-
-extern void idp_leds_event(led_event_t evt);
-extern void lubbock_leds_event(led_event_t evt);
-extern void mainstone_leds_event(led_event_t evt);
-extern void trizeps4_leds_event(led_event_t evt);
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/littleton.c b/ANDROID_3.4.5/arch/arm/mach-pxa/littleton.c
deleted file mode 100644
index 1fb86edb..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/littleton.c
+++ /dev/null
@@ -1,449 +0,0 @@
-/*
- *  linux/arch/arm/mach-pxa/littleton.c
- *
- *  Support for the Marvell Littleton Development Platform.
- *
- *  Author:	Jason Chagas (largely modified code)
- *  Created:	Nov 20, 2006
- *  Copyright:	(C) Copyright 2006 Marvell International Ltd.
- *
- *  2007-11-22  modified to align with latest kernel
- *              eric miao <eric.miao@marvell.com>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  publishhed by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/clk.h>
-#include <linux/gpio.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/pxa2xx_spi.h>
-#include <linux/smc91x.h>
-#include <linux/i2c.h>
-#include <linux/leds.h>
-#include <linux/mfd/da903x.h>
-#include <linux/i2c/max732x.h>
-#include <linux/i2c/pxa-i2c.h>
-
-#include <asm/types.h>
-#include <asm/setup.h>
-#include <asm/memory.h>
-#include <asm/mach-types.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/pxa300.h>
-#include <mach/pxafb.h>
-#include <mach/mmc.h>
-#include <plat/pxa27x_keypad.h>
-#include <mach/littleton.h>
-#include <plat/pxa3xx_nand.h>
-
-#include "generic.h"
-
-#define GPIO_MMC1_CARD_DETECT	mfp_to_gpio(MFP_PIN_GPIO15)
-
-/* Littleton MFP configurations */
-static mfp_cfg_t littleton_mfp_cfg[] __initdata = {
-	/* LCD */
-	GPIO54_LCD_LDD_0,
-	GPIO55_LCD_LDD_1,
-	GPIO56_LCD_LDD_2,
-	GPIO57_LCD_LDD_3,
-	GPIO58_LCD_LDD_4,
-	GPIO59_LCD_LDD_5,
-	GPIO60_LCD_LDD_6,
-	GPIO61_LCD_LDD_7,
-	GPIO62_LCD_LDD_8,
-	GPIO63_LCD_LDD_9,
-	GPIO64_LCD_LDD_10,
-	GPIO65_LCD_LDD_11,
-	GPIO66_LCD_LDD_12,
-	GPIO67_LCD_LDD_13,
-	GPIO68_LCD_LDD_14,
-	GPIO69_LCD_LDD_15,
-	GPIO70_LCD_LDD_16,
-	GPIO71_LCD_LDD_17,
-	GPIO72_LCD_FCLK,
-	GPIO73_LCD_LCLK,
-	GPIO74_LCD_PCLK,
-	GPIO75_LCD_BIAS,
-
-	/* SSP2 */
-	GPIO25_SSP2_SCLK,
-	GPIO27_SSP2_TXD,
-	GPIO17_GPIO,	/* SFRM as chip-select */
-
-	/* Debug Ethernet */
-	GPIO90_GPIO,
-
-	/* Keypad */
-	GPIO107_KP_DKIN_0,
-	GPIO108_KP_DKIN_1,
-	GPIO115_KP_MKIN_0,
-	GPIO116_KP_MKIN_1,
-	GPIO117_KP_MKIN_2,
-	GPIO118_KP_MKIN_3,
-	GPIO119_KP_MKIN_4,
-	GPIO120_KP_MKIN_5,
-	GPIO121_KP_MKOUT_0,
-	GPIO122_KP_MKOUT_1,
-	GPIO123_KP_MKOUT_2,
-	GPIO124_KP_MKOUT_3,
-	GPIO125_KP_MKOUT_4,
-
-	/* MMC1 */
-	GPIO3_MMC1_DAT0,
-	GPIO4_MMC1_DAT1,
-	GPIO5_MMC1_DAT2,
-	GPIO6_MMC1_DAT3,
-	GPIO7_MMC1_CLK,
-	GPIO8_MMC1_CMD,
-	GPIO15_GPIO, /* card detect */
-
-	/* UART3 */
-	GPIO107_UART3_CTS,
-	GPIO108_UART3_RTS,
-	GPIO109_UART3_TXD,
-	GPIO110_UART3_RXD,
-};
-
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.start	= (LITTLETON_ETH_PHYS + 0x300),
-		.end	= (LITTLETON_ETH_PHYS + 0xfffff),
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO90)),
-		.end	= PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO90)),
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
-	}
-};
-
-static struct smc91x_platdata littleton_smc91x_info = {
-	.flags	= SMC91X_USE_8BIT | SMC91X_USE_16BIT |
-		  SMC91X_NOWAIT | SMC91X_USE_DMA,
-};
-
-static struct platform_device smc91x_device = {
-	.name		= "smc91x",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(smc91x_resources),
-	.resource	= smc91x_resources,
-	.dev		= {
-		.platform_data = &littleton_smc91x_info,
-	},
-};
-
-#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
-static struct pxafb_mode_info tpo_tdo24mtea1_modes[] = {
-	[0] = {
-		/* VGA */
-		.pixclock	= 38250,
-		.xres		= 480,
-		.yres		= 640,
-		.bpp		= 16,
-		.hsync_len	= 8,
-		.left_margin	= 8,
-		.right_margin	= 24,
-		.vsync_len	= 2,
-		.upper_margin	= 2,
-		.lower_margin	= 4,
-		.sync		= 0,
-	},
-	[1] = {
-		/* QVGA */
-		.pixclock	= 153000,
-		.xres		= 240,
-		.yres		= 320,
-		.bpp		= 16,
-		.hsync_len	= 8,
-		.left_margin	= 8,
-		.right_margin	= 88,
-		.vsync_len	= 2,
-		.upper_margin	= 2,
-		.lower_margin	= 2,
-		.sync		= 0,
-	},
-};
-
-static struct pxafb_mach_info littleton_lcd_info = {
-	.modes			= tpo_tdo24mtea1_modes,
-	.num_modes		= 2,
-	.lcd_conn		= LCD_COLOR_TFT_16BPP,
-};
-
-static void littleton_init_lcd(void)
-{
-	pxa_set_fb_info(NULL, &littleton_lcd_info);
-}
-#else
-static inline void littleton_init_lcd(void) {};
-#endif /* CONFIG_FB_PXA || CONFIG_FB_PXA_MODULE */
-
-#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE)
-static struct pxa2xx_spi_master littleton_spi_info = {
-	.num_chipselect		= 1,
-};
-
-static struct pxa2xx_spi_chip littleton_tdo24m_chip = {
-	.rx_threshold	= 1,
-	.tx_threshold	= 1,
-	.gpio_cs	= LITTLETON_GPIO_LCD_CS,
-};
-
-static struct spi_board_info littleton_spi_devices[] __initdata = {
-	{
-		.modalias	= "tdo24m",
-		.max_speed_hz	= 1000000,
-		.bus_num	= 2,
-		.chip_select	= 0,
-		.controller_data= &littleton_tdo24m_chip,
-	},
-};
-
-static void __init littleton_init_spi(void)
-{
-	pxa2xx_set_spi_info(2, &littleton_spi_info);
-	spi_register_board_info(ARRAY_AND_SIZE(littleton_spi_devices));
-}
-#else
-static inline void littleton_init_spi(void) {}
-#endif
-
-#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
-static unsigned int littleton_matrix_key_map[] = {
-	/* KEY(row, col, key_code) */
-	KEY(1, 3, KEY_0), KEY(0, 0, KEY_1), KEY(1, 0, KEY_2), KEY(2, 0, KEY_3),
-	KEY(0, 1, KEY_4), KEY(1, 1, KEY_5), KEY(2, 1, KEY_6), KEY(0, 2, KEY_7),
-	KEY(1, 2, KEY_8), KEY(2, 2, KEY_9),
-
-	KEY(0, 3, KEY_KPASTERISK), 	/* * */
-	KEY(2, 3, KEY_KPDOT), 		/* # */
-
-	KEY(5, 4, KEY_ENTER),
-
-	KEY(5, 0, KEY_UP),
-	KEY(5, 1, KEY_DOWN),
-	KEY(5, 2, KEY_LEFT),
-	KEY(5, 3, KEY_RIGHT),
-	KEY(3, 2, KEY_HOME),
-	KEY(4, 1, KEY_END),
-	KEY(3, 3, KEY_BACK),
-
-	KEY(4, 0, KEY_SEND),
-	KEY(4, 2, KEY_VOLUMEUP),
-	KEY(4, 3, KEY_VOLUMEDOWN),
-
-	KEY(3, 0, KEY_F22),	/* soft1 */
-	KEY(3, 1, KEY_F23),	/* soft2 */
-};
-
-static struct pxa27x_keypad_platform_data littleton_keypad_info = {
-	.matrix_key_rows	= 6,
-	.matrix_key_cols	= 5,
-	.matrix_key_map		= littleton_matrix_key_map,
-	.matrix_key_map_size	= ARRAY_SIZE(littleton_matrix_key_map),
-
-	.enable_rotary0		= 1,
-	.rotary0_up_key		= KEY_UP,
-	.rotary0_down_key	= KEY_DOWN,
-
-	.debounce_interval	= 30,
-};
-static void __init littleton_init_keypad(void)
-{
-	pxa_set_keypad_info(&littleton_keypad_info);
-}
-#else
-static inline void littleton_init_keypad(void) {}
-#endif
-
-#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
-static struct pxamci_platform_data littleton_mci_platform_data = {
-	.detect_delay_ms	= 200,
-	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.gpio_card_detect	= GPIO_MMC1_CARD_DETECT,
-	.gpio_card_ro		= -1,
-	.gpio_power		= -1,
-};
-
-static void __init littleton_init_mmc(void)
-{
-	pxa_set_mci_info(&littleton_mci_platform_data);
-}
-#else
-static inline void littleton_init_mmc(void) {}
-#endif
-
-#if defined(CONFIG_MTD_NAND_PXA3xx) || defined(CONFIG_MTD_NAND_PXA3xx_MODULE)
-static struct mtd_partition littleton_nand_partitions[] = {
-	[0] = {
-		.name        = "Bootloader",
-		.offset      = 0,
-		.size        = 0x060000,
-		.mask_flags  = MTD_WRITEABLE, /* force read-only */
-	},
-	[1] = {
-		.name        = "Kernel",
-		.offset      = 0x060000,
-		.size        = 0x200000,
-		.mask_flags  = MTD_WRITEABLE, /* force read-only */
-	},
-	[2] = {
-		.name        = "Filesystem",
-		.offset      = 0x0260000,
-		.size        = 0x3000000,     /* 48M - rootfs */
-	},
-	[3] = {
-		.name        = "MassStorage",
-		.offset      = 0x3260000,
-		.size        = 0x3d40000,
-	},
-	[4] = {
-		.name        = "BBT",
-		.offset      = 0x6FA0000,
-		.size        = 0x80000,
-		.mask_flags  = MTD_WRITEABLE,  /* force read-only */
-	},
-	/* NOTE: we reserve some blocks at the end of the NAND flash for
-	 * bad block management, and the max number of relocation blocks
-	 * differs on different platforms. Please take care with it when
-	 * defining the partition table.
-	 */
-};
-
-static struct pxa3xx_nand_platform_data littleton_nand_info = {
-	.enable_arbiter	= 1,
-	.num_cs		= 1,
-	.parts[0]	= littleton_nand_partitions,
-	.nr_parts[0]	= ARRAY_SIZE(littleton_nand_partitions),
-};
-
-static void __init littleton_init_nand(void)
-{
-	pxa3xx_set_nand_info(&littleton_nand_info);
-}
-#else
-static inline void littleton_init_nand(void) {}
-#endif /* CONFIG_MTD_NAND_PXA3xx || CONFIG_MTD_NAND_PXA3xx_MODULE */
-
-#if defined(CONFIG_I2C_PXA) || defined(CONFIG_I2C_PXA_MODULE)
-static struct led_info littleton_da9034_leds[] = {
-	[0] = {
-		.name	= "littleton:keypad1",
-		.flags	= DA9034_LED_RAMP,
-	},
-	[1] = {
-		.name	= "littleton:keypad2",
-		.flags	= DA9034_LED_RAMP,
-	},
-	[2] = {
-		.name	= "littleton:vibra",
-		.flags	= 0,
-	},
-};
-
-static struct da9034_touch_pdata littleton_da9034_touch = {
-	.x_inverted     = 1,
-	.interval_ms    = 20,
-};
-
-static struct da903x_subdev_info littleton_da9034_subdevs[] = {
-	{
-		.name		= "da903x-led",
-		.id		= DA9034_ID_LED_1,
-		.platform_data	= &littleton_da9034_leds[0],
-	}, {
-		.name		= "da903x-led",
-		.id		= DA9034_ID_LED_2,
-		.platform_data	= &littleton_da9034_leds[1],
-	}, {
-		.name		= "da903x-led",
-		.id		= DA9034_ID_VIBRA,
-		.platform_data	= &littleton_da9034_leds[2],
-	}, {
-		.name		= "da903x-backlight",
-		.id		= DA9034_ID_WLED,
-	}, {
-		.name		= "da9034-touch",
-		.id		= DA9034_ID_TOUCH,
-		.platform_data	= &littleton_da9034_touch,
-	},
-};
-
-static struct da903x_platform_data littleton_da9034_info = {
-	.num_subdevs	= ARRAY_SIZE(littleton_da9034_subdevs),
-	.subdevs	= littleton_da9034_subdevs,
-};
-
-static struct max732x_platform_data littleton_max7320_info = {
-	.gpio_base	= EXT0_GPIO_BASE,
-};
-
-static struct i2c_board_info littleton_i2c_info[] = {
-	[0] = {
-		.type		= "da9034",
-		.addr		= 0x34,
-		.platform_data	= &littleton_da9034_info,
-		.irq		= PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO18)),
-	},
-	[1] = {
-		.type		= "max7320",
-		.addr		= 0x50,
-		.platform_data	= &littleton_max7320_info,
-	},
-};
-
-static void __init littleton_init_i2c(void)
-{
-	pxa_set_i2c_info(NULL);
-	i2c_register_board_info(0, ARRAY_AND_SIZE(littleton_i2c_info));
-}
-#else
-static inline void littleton_init_i2c(void) {}
-#endif /* CONFIG_I2C_PXA || CONFIG_I2C_PXA_MODULE */
-
-static void __init littleton_init(void)
-{
-	/* initialize MFP configurations */
-	pxa3xx_mfp_config(ARRAY_AND_SIZE(littleton_mfp_cfg));
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	/*
-	 * Note: we depend bootloader set the correct
-	 * value to MSC register for SMC91x.
-	 */
-	platform_device_register(&smc91x_device);
-
-	littleton_init_spi();
-	littleton_init_i2c();
-	littleton_init_mmc();
-	littleton_init_lcd();
-	littleton_init_keypad();
-	littleton_init_nand();
-}
-
-MACHINE_START(LITTLETON, "Marvell Form Factor Development Platform (aka Littleton)")
-	.atag_offset	= 0x100,
-	.map_io		= pxa3xx_map_io,
-	.nr_irqs	= LITTLETON_NR_IRQS,
-	.init_irq	= pxa3xx_init_irq,
-	.handle_irq	= pxa3xx_handle_irq,
-	.timer		= &pxa_timer,
-	.init_machine	= littleton_init,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/lpd270.c b/ANDROID_3.4.5/arch/arm/mach-pxa/lpd270.c
deleted file mode 100644
index cee9ce2f..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/lpd270.c
+++ /dev/null
@@ -1,509 +0,0 @@
-/*
- * linux/arch/arm/mach-pxa/lpd270.c
- *
- * Support for the LogicPD PXA270 Card Engine.
- * Derived from the mainstone code, which carries these notices:
- *
- * Author:	Nicolas Pitre
- * Created:	Nov 05, 2002
- * Copyright:	MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/syscore_ops.h>
-#include <linux/interrupt.h>
-#include <linux/sched.h>
-#include <linux/bitops.h>
-#include <linux/fb.h>
-#include <linux/ioport.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/pwm_backlight.h>
-
-#include <asm/types.h>
-#include <asm/setup.h>
-#include <asm/memory.h>
-#include <asm/mach-types.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/sizes.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/flash.h>
-
-#include <mach/pxa27x.h>
-#include <mach/lpd270.h>
-#include <mach/audio.h>
-#include <mach/pxafb.h>
-#include <mach/mmc.h>
-#include <mach/irda.h>
-#include <mach/ohci.h>
-#include <mach/smemc.h>
-
-#include "generic.h"
-#include "devices.h"
-
-static unsigned long lpd270_pin_config[] __initdata = {
-	/* Chip Selects */
-	GPIO15_nCS_1,	/* Mainboard Flash */
-	GPIO78_nCS_2,	/* CPLD + Ethernet */
-
-	/* LCD - 16bpp Active TFT */
-	GPIO58_LCD_LDD_0,
-	GPIO59_LCD_LDD_1,
-	GPIO60_LCD_LDD_2,
-	GPIO61_LCD_LDD_3,
-	GPIO62_LCD_LDD_4,
-	GPIO63_LCD_LDD_5,
-	GPIO64_LCD_LDD_6,
-	GPIO65_LCD_LDD_7,
-	GPIO66_LCD_LDD_8,
-	GPIO67_LCD_LDD_9,
-	GPIO68_LCD_LDD_10,
-	GPIO69_LCD_LDD_11,
-	GPIO70_LCD_LDD_12,
-	GPIO71_LCD_LDD_13,
-	GPIO72_LCD_LDD_14,
-	GPIO73_LCD_LDD_15,
-	GPIO74_LCD_FCLK,
-	GPIO75_LCD_LCLK,
-	GPIO76_LCD_PCLK,
-	GPIO77_LCD_BIAS,
-	GPIO16_PWM0_OUT,	/* Backlight */
-
-	/* USB Host */
-	GPIO88_USBH1_PWR,
-	GPIO89_USBH1_PEN,
-
-	/* AC97 */
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-	GPIO45_AC97_SYSCLK,
-
-	GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,
-};
-
-static unsigned int lpd270_irq_enabled;
-
-static void lpd270_mask_irq(struct irq_data *d)
-{
-	int lpd270_irq = d->irq - LPD270_IRQ(0);
-
-	__raw_writew(~(1 << lpd270_irq), LPD270_INT_STATUS);
-
-	lpd270_irq_enabled &= ~(1 << lpd270_irq);
-	__raw_writew(lpd270_irq_enabled, LPD270_INT_MASK);
-}
-
-static void lpd270_unmask_irq(struct irq_data *d)
-{
-	int lpd270_irq = d->irq - LPD270_IRQ(0);
-
-	lpd270_irq_enabled |= 1 << lpd270_irq;
-	__raw_writew(lpd270_irq_enabled, LPD270_INT_MASK);
-}
-
-static struct irq_chip lpd270_irq_chip = {
-	.name		= "CPLD",
-	.irq_ack	= lpd270_mask_irq,
-	.irq_mask	= lpd270_mask_irq,
-	.irq_unmask	= lpd270_unmask_irq,
-};
-
-static void lpd270_irq_handler(unsigned int irq, struct irq_desc *desc)
-{
-	unsigned long pending;
-
-	pending = __raw_readw(LPD270_INT_STATUS) & lpd270_irq_enabled;
-	do {
-		/* clear useless edge notification */
-		desc->irq_data.chip->irq_ack(&desc->irq_data);
-		if (likely(pending)) {
-			irq = LPD270_IRQ(0) + __ffs(pending);
-			generic_handle_irq(irq);
-
-			pending = __raw_readw(LPD270_INT_STATUS) &
-						lpd270_irq_enabled;
-		}
-	} while (pending);
-}
-
-static void __init lpd270_init_irq(void)
-{
-	int irq;
-
-	pxa27x_init_irq();
-
-	__raw_writew(0, LPD270_INT_MASK);
-	__raw_writew(0, LPD270_INT_STATUS);
-
-	/* setup extra LogicPD PXA270 irqs */
-	for (irq = LPD270_IRQ(2); irq <= LPD270_IRQ(4); irq++) {
-		irq_set_chip_and_handler(irq, &lpd270_irq_chip,
-					 handle_level_irq);
-		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
-	}
-	irq_set_chained_handler(PXA_GPIO_TO_IRQ(0), lpd270_irq_handler);
-	irq_set_irq_type(PXA_GPIO_TO_IRQ(0), IRQ_TYPE_EDGE_FALLING);
-}
-
-
-#ifdef CONFIG_PM
-static void lpd270_irq_resume(void)
-{
-	__raw_writew(lpd270_irq_enabled, LPD270_INT_MASK);
-}
-
-static struct syscore_ops lpd270_irq_syscore_ops = {
-	.resume = lpd270_irq_resume,
-};
-
-static int __init lpd270_irq_device_init(void)
-{
-	if (machine_is_logicpd_pxa270()) {
-		register_syscore_ops(&lpd270_irq_syscore_ops);
-		return 0;
-	}
-	return -ENODEV;
-}
-
-device_initcall(lpd270_irq_device_init);
-#endif
-
-
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.start	= LPD270_ETH_PHYS,
-		.end	= (LPD270_ETH_PHYS + 0xfffff),
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= LPD270_ETHERNET_IRQ,
-		.end	= LPD270_ETHERNET_IRQ,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device smc91x_device = {
-	.name		= "smc91x",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(smc91x_resources),
-	.resource	= smc91x_resources,
-};
-
-static struct resource lpd270_flash_resources[] = {
-	[0] = {
-		.start	= PXA_CS0_PHYS,
-		.end	= PXA_CS0_PHYS + SZ_64M - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= PXA_CS1_PHYS,
-		.end	= PXA_CS1_PHYS + SZ_64M - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct mtd_partition lpd270_flash0_partitions[] = {
-	{
-		.name =		"Bootloader",
-		.size =		0x00040000,
-		.offset =	0,
-		.mask_flags =	MTD_WRITEABLE  /* force read-only */
-	}, {
-		.name =		"Kernel",
-		.size =		0x00400000,
-		.offset =	0x00040000,
-	}, {
-		.name =		"Filesystem",
-		.size =		MTDPART_SIZ_FULL,
-		.offset =	0x00440000
-	},
-};
-
-static struct flash_platform_data lpd270_flash_data[2] = {
-	{
-		.name		= "processor-flash",
-		.map_name	= "cfi_probe",
-		.parts		= lpd270_flash0_partitions,
-		.nr_parts	= ARRAY_SIZE(lpd270_flash0_partitions),
-	}, {
-		.name		= "mainboard-flash",
-		.map_name	= "cfi_probe",
-		.parts		= NULL,
-		.nr_parts	= 0,
-	}
-};
-
-static struct platform_device lpd270_flash_device[2] = {
-	{
-		.name		= "pxa2xx-flash",
-		.id		= 0,
-		.dev = {
-			.platform_data	= &lpd270_flash_data[0],
-		},
-		.resource	= &lpd270_flash_resources[0],
-		.num_resources	= 1,
-	}, {
-		.name		= "pxa2xx-flash",
-		.id		= 1,
-		.dev = {
-			.platform_data	= &lpd270_flash_data[1],
-		},
-		.resource	= &lpd270_flash_resources[1],
-		.num_resources	= 1,
-	},
-};
-
-static struct platform_pwm_backlight_data lpd270_backlight_data = {
-	.pwm_id		= 0,
-	.max_brightness	= 1,
-	.dft_brightness	= 1,
-	.pwm_period_ns	= 78770,
-};
-
-static struct platform_device lpd270_backlight_device = {
-	.name		= "pwm-backlight",
-	.dev		= {
-		.parent	= &pxa27x_device_pwm0.dev,
-		.platform_data = &lpd270_backlight_data,
-	},
-};
-
-/* 5.7" TFT QVGA (LoLo display number 1) */
-static struct pxafb_mode_info sharp_lq057q3dc02_mode = {
-	.pixclock		= 150000,
-	.xres			= 320,
-	.yres			= 240,
-	.bpp			= 16,
-	.hsync_len		= 0x14,
-	.left_margin		= 0x28,
-	.right_margin		= 0x0a,
-	.vsync_len		= 0x02,
-	.upper_margin		= 0x08,
-	.lower_margin		= 0x14,
-	.sync			= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-};
-
-static struct pxafb_mach_info sharp_lq057q3dc02 = {
-	.modes			= &sharp_lq057q3dc02_mode,
-	.num_modes		= 1,
-	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |
-				  LCD_ALTERNATE_MAPPING,
-};
-
-/* 12.1" TFT SVGA (LoLo display number 2) */
-static struct pxafb_mode_info sharp_lq121s1dg31_mode = {
-	.pixclock		= 50000,
-	.xres			= 800,
-	.yres			= 600,
-	.bpp			= 16,
-	.hsync_len		= 0x05,
-	.left_margin		= 0x52,
-	.right_margin		= 0x05,
-	.vsync_len		= 0x04,
-	.upper_margin		= 0x14,
-	.lower_margin		= 0x0a,
-	.sync			= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-};
-
-static struct pxafb_mach_info sharp_lq121s1dg31 = {
-	.modes			= &sharp_lq121s1dg31_mode,
-	.num_modes		= 1,
-	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |
-				  LCD_ALTERNATE_MAPPING,
-};
-
-/* 3.6" TFT QVGA (LoLo display number 3) */
-static struct pxafb_mode_info sharp_lq036q1da01_mode = {
-	.pixclock		= 150000,
-	.xres			= 320,
-	.yres			= 240,
-	.bpp			= 16,
-	.hsync_len		= 0x0e,
-	.left_margin		= 0x04,
-	.right_margin		= 0x0a,
-	.vsync_len		= 0x03,
-	.upper_margin		= 0x03,
-	.lower_margin		= 0x03,
-	.sync			= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-};
-
-static struct pxafb_mach_info sharp_lq036q1da01 = {
-	.modes			= &sharp_lq036q1da01_mode,
-	.num_modes		= 1,
-	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |
-				  LCD_ALTERNATE_MAPPING,
-};
-
-/* 6.4" TFT VGA (LoLo display number 5) */
-static struct pxafb_mode_info sharp_lq64d343_mode = {
-	.pixclock		= 25000,
-	.xres			= 640,
-	.yres			= 480,
-	.bpp			= 16,
-	.hsync_len		= 0x31,
-	.left_margin		= 0x89,
-	.right_margin		= 0x19,
-	.vsync_len		= 0x12,
-	.upper_margin		= 0x22,
-	.lower_margin		= 0x00,
-	.sync			= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-};
-
-static struct pxafb_mach_info sharp_lq64d343 = {
-	.modes			= &sharp_lq64d343_mode,
-	.num_modes		= 1,
-	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |
-				  LCD_ALTERNATE_MAPPING,
-};
-
-/* 10.4" TFT VGA (LoLo display number 7) */
-static struct pxafb_mode_info sharp_lq10d368_mode = {
-	.pixclock		= 25000,
-	.xres			= 640,
-	.yres			= 480,
-	.bpp			= 16,
-	.hsync_len		= 0x31,
-	.left_margin		= 0x89,
-	.right_margin		= 0x19,
-	.vsync_len		= 0x12,
-	.upper_margin		= 0x22,
-	.lower_margin		= 0x00,
-	.sync			= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-};
-
-static struct pxafb_mach_info sharp_lq10d368 = {
-	.modes			= &sharp_lq10d368_mode,
-	.num_modes		= 1,
-	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |
-				  LCD_ALTERNATE_MAPPING,
-};
-
-/* 3.5" TFT QVGA (LoLo display number 8) */
-static struct pxafb_mode_info sharp_lq035q7db02_20_mode = {
-	.pixclock		= 150000,
-	.xres			= 240,
-	.yres			= 320,
-	.bpp			= 16,
-	.hsync_len		= 0x0e,
-	.left_margin		= 0x0a,
-	.right_margin		= 0x0a,
-	.vsync_len		= 0x03,
-	.upper_margin		= 0x05,
-	.lower_margin		= 0x14,
-	.sync			= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-};
-
-static struct pxafb_mach_info sharp_lq035q7db02_20 = {
-	.modes			= &sharp_lq035q7db02_20_mode,
-	.num_modes		= 1,
-	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |
-				  LCD_ALTERNATE_MAPPING,
-};
-
-static struct pxafb_mach_info *lpd270_lcd_to_use;
-
-static int __init lpd270_set_lcd(char *str)
-{
-	if (!strnicmp(str, "lq057q3dc02", 11)) {
-		lpd270_lcd_to_use = &sharp_lq057q3dc02;
-	} else if (!strnicmp(str, "lq121s1dg31", 11)) {
-		lpd270_lcd_to_use = &sharp_lq121s1dg31;
-	} else if (!strnicmp(str, "lq036q1da01", 11)) {
-		lpd270_lcd_to_use = &sharp_lq036q1da01;
-	} else if (!strnicmp(str, "lq64d343", 8)) {
-		lpd270_lcd_to_use = &sharp_lq64d343;
-	} else if (!strnicmp(str, "lq10d368", 8)) {
-		lpd270_lcd_to_use = &sharp_lq10d368;
-	} else if (!strnicmp(str, "lq035q7db02-20", 14)) {
-		lpd270_lcd_to_use = &sharp_lq035q7db02_20;
-	} else {
-		printk(KERN_INFO "lpd270: unknown lcd panel [%s]\n", str);
-	}
-
-	return 1;
-}
-
-__setup("lcd=", lpd270_set_lcd);
-
-static struct platform_device *platform_devices[] __initdata = {
-	&smc91x_device,
-	&lpd270_backlight_device,
-	&lpd270_flash_device[0],
-	&lpd270_flash_device[1],
-};
-
-static struct pxaohci_platform_data lpd270_ohci_platform_data = {
-	.port_mode	= PMM_PERPORT_MODE,
-	.flags		= ENABLE_PORT_ALL | POWER_CONTROL_LOW | POWER_SENSE_LOW,
-};
-
-static void __init lpd270_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(lpd270_pin_config));
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	lpd270_flash_data[0].width = (__raw_readl(BOOT_DEF) & 1) ? 2 : 4;
-	lpd270_flash_data[1].width = 4;
-
-	/*
-	 * System bus arbiter setting:
-	 * - Core_Park
-	 * - LCD_wt:DMA_wt:CORE_Wt = 2:3:4
-	 */
-	ARB_CNTRL = ARB_CORE_PARK | 0x234;
-
-	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
-
-	pxa_set_ac97_info(NULL);
-
-	if (lpd270_lcd_to_use != NULL)
-		pxa_set_fb_info(NULL, lpd270_lcd_to_use);
-
-	pxa_set_ohci_info(&lpd270_ohci_platform_data);
-}
-
-
-static struct map_desc lpd270_io_desc[] __initdata = {
-	{
-		.virtual	= (unsigned long)LPD270_CPLD_VIRT,
-		.pfn		= __phys_to_pfn(LPD270_CPLD_PHYS),
-		.length		= LPD270_CPLD_SIZE,
-		.type		= MT_DEVICE,
-	},
-};
-
-static void __init lpd270_map_io(void)
-{
-	pxa27x_map_io();
-	iotable_init(lpd270_io_desc, ARRAY_SIZE(lpd270_io_desc));
-
-	/* for use I SRAM as framebuffer.  */
-	PSLR |= 0x00000F04;
-	PCFR  = 0x00000066;
-}
-
-MACHINE_START(LOGICPD_PXA270, "LogicPD PXA270 Card Engine")
-	/* Maintainer: Peter Barada */
-	.atag_offset	= 0x100,
-	.map_io		= lpd270_map_io,
-	.nr_irqs	= LPD270_NR_IRQS,
-	.init_irq	= lpd270_init_irq,
-	.handle_irq	= pxa27x_handle_irq,
-	.timer		= &pxa_timer,
-	.init_machine	= lpd270_init,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/lubbock.c b/ANDROID_3.4.5/arch/arm/mach-pxa/lubbock.c
deleted file mode 100644
index 6bb3f47b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/lubbock.c
+++ /dev/null
@@ -1,561 +0,0 @@
-/*
- *  linux/arch/arm/mach-pxa/lubbock.c
- *
- *  Support for the Intel DBPXA250 Development Platform.
- *
- *  Author:	Nicolas Pitre
- *  Created:	Jun 15, 2001
- *  Copyright:	MontaVista Software Inc.
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-#include <linux/gpio.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/syscore_ops.h>
-#include <linux/major.h>
-#include <linux/fb.h>
-#include <linux/interrupt.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/smc91x.h>
-
-#include <linux/spi/spi.h>
-#include <linux/spi/ads7846.h>
-#include <linux/spi/pxa2xx_spi.h>
-
-#include <asm/setup.h>
-#include <asm/memory.h>
-#include <asm/mach-types.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/sizes.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/flash.h>
-
-#include <asm/hardware/sa1111.h>
-
-#include <mach/pxa25x.h>
-#include <mach/audio.h>
-#include <mach/lubbock.h>
-#include <mach/udc.h>
-#include <mach/irda.h>
-#include <mach/pxafb.h>
-#include <mach/mmc.h>
-#include <mach/pm.h>
-#include <mach/smemc.h>
-
-#include "generic.h"
-#include "clock.h"
-#include "devices.h"
-
-static unsigned long lubbock_pin_config[] __initdata = {
-	GPIO15_nCS_1,	/* CS1 - Flash */
-	GPIO78_nCS_2,	/* CS2 - Baseboard FGPA */
-	GPIO79_nCS_3,	/* CS3 - SMC ethernet */
-	GPIO80_nCS_4,	/* CS4 - SA1111 */
-
-	/* SSP data pins */
-	GPIO23_SSP1_SCLK,
-	GPIO25_SSP1_TXD,
-	GPIO26_SSP1_RXD,
-
-	/* AC97 */
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-
-	/* LCD - 16bpp DSTN */
-	GPIOxx_LCD_DSTN_16BPP,
-
-	/* BTUART */
-	GPIO42_BTUART_RXD,
-	GPIO43_BTUART_TXD,
-	GPIO44_BTUART_CTS,
-	GPIO45_BTUART_RTS,
-
-	/* PC Card */
-	GPIO48_nPOE,
-	GPIO49_nPWE,
-	GPIO50_nPIOR,
-	GPIO51_nPIOW,
-	GPIO52_nPCE_1,
-	GPIO53_nPCE_2,
-	GPIO54_nPSKTSEL,
-	GPIO55_nPREG,
-	GPIO56_nPWAIT,
-	GPIO57_nIOIS16,
-
-	/* MMC */
-	GPIO6_MMC_CLK,
-	GPIO8_MMC_CS0,
-
-	/* wakeup */
-	GPIO1_GPIO | WAKEUP_ON_EDGE_RISE,
-};
-
-#define LUB_HEXLED		__LUB_REG(LUBBOCK_FPGA_PHYS + 0x010)
-#define LUB_MISC_WR		__LUB_REG(LUBBOCK_FPGA_PHYS + 0x080)
-
-void lubbock_set_hexled(uint32_t value)
-{
-	LUB_HEXLED = value;
-}
-
-void lubbock_set_misc_wr(unsigned int mask, unsigned int set)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-	LUB_MISC_WR = (LUB_MISC_WR & ~mask) | (set & mask);
-	local_irq_restore(flags);
-}
-EXPORT_SYMBOL(lubbock_set_misc_wr);
-
-static unsigned long lubbock_irq_enabled;
-
-static void lubbock_mask_irq(struct irq_data *d)
-{
-	int lubbock_irq = (d->irq - LUBBOCK_IRQ(0));
-	LUB_IRQ_MASK_EN = (lubbock_irq_enabled &= ~(1 << lubbock_irq));
-}
-
-static void lubbock_unmask_irq(struct irq_data *d)
-{
-	int lubbock_irq = (d->irq - LUBBOCK_IRQ(0));
-	/* the irq can be acknowledged only if deasserted, so it's done here */
-	LUB_IRQ_SET_CLR &= ~(1 << lubbock_irq);
-	LUB_IRQ_MASK_EN = (lubbock_irq_enabled |= (1 << lubbock_irq));
-}
-
-static struct irq_chip lubbock_irq_chip = {
-	.name		= "FPGA",
-	.irq_ack	= lubbock_mask_irq,
-	.irq_mask	= lubbock_mask_irq,
-	.irq_unmask	= lubbock_unmask_irq,
-};
-
-static void lubbock_irq_handler(unsigned int irq, struct irq_desc *desc)
-{
-	unsigned long pending = LUB_IRQ_SET_CLR & lubbock_irq_enabled;
-	do {
-		/* clear our parent irq */
-		desc->irq_data.chip->irq_ack(&desc->irq_data);
-		if (likely(pending)) {
-			irq = LUBBOCK_IRQ(0) + __ffs(pending);
-			generic_handle_irq(irq);
-		}
-		pending = LUB_IRQ_SET_CLR & lubbock_irq_enabled;
-	} while (pending);
-}
-
-static void __init lubbock_init_irq(void)
-{
-	int irq;
-
-	pxa25x_init_irq();
-
-	/* setup extra lubbock irqs */
-	for (irq = LUBBOCK_IRQ(0); irq <= LUBBOCK_LAST_IRQ; irq++) {
-		irq_set_chip_and_handler(irq, &lubbock_irq_chip,
-					 handle_level_irq);
-		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
-	}
-
-	irq_set_chained_handler(PXA_GPIO_TO_IRQ(0), lubbock_irq_handler);
-	irq_set_irq_type(PXA_GPIO_TO_IRQ(0), IRQ_TYPE_EDGE_FALLING);
-}
-
-#ifdef CONFIG_PM
-
-static void lubbock_irq_resume(void)
-{
-	LUB_IRQ_MASK_EN = lubbock_irq_enabled;
-}
-
-static struct syscore_ops lubbock_irq_syscore_ops = {
-	.resume = lubbock_irq_resume,
-};
-
-static int __init lubbock_irq_device_init(void)
-{
-	if (machine_is_lubbock()) {
-		register_syscore_ops(&lubbock_irq_syscore_ops);
-		return 0;
-	}
-	return -ENODEV;
-}
-
-device_initcall(lubbock_irq_device_init);
-
-#endif
-
-static int lubbock_udc_is_connected(void)
-{
-	return (LUB_MISC_RD & (1 << 9)) == 0;
-}
-
-static struct pxa2xx_udc_mach_info udc_info __initdata = {
-	.udc_is_connected	= lubbock_udc_is_connected,
-	// no D+ pullup; lubbock can't connect/disconnect in software
-};
-
-static struct resource sa1111_resources[] = {
-	[0] = {
-		.start	= 0x10000000,
-		.end	= 0x10001fff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= LUBBOCK_SA1111_IRQ,
-		.end	= LUBBOCK_SA1111_IRQ,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct sa1111_platform_data sa1111_info = {
-	.irq_base	= LUBBOCK_SA1111_IRQ_BASE,
-	.disable_devs	= SA1111_DEVID_SAC,
-};
-
-static struct platform_device sa1111_device = {
-	.name		= "sa1111",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(sa1111_resources),
-	.resource	= sa1111_resources,
-	.dev		= {
-		.platform_data	= &sa1111_info,
-	},
-};
-
-/* ADS7846 is connected through SSP ... and if your board has J5 populated,
- * you can select it to replace the ucb1400 by switching the touchscreen cable
- * (to J5) and poking board registers (as done below).  Else it's only useful
- * for the temperature sensors.
- */
-static struct pxa2xx_spi_master pxa_ssp_master_info = {
-	.num_chipselect	= 1,
-};
-
-static int lubbock_ads7846_pendown_state(void)
-{
-	/* TS_BUSY is bit 8 in LUB_MISC_RD, but pendown is irq-only */
-	return 0;
-}
-
-static struct ads7846_platform_data ads_info = {
-	.model			= 7846,
-	.vref_delay_usecs	= 100,		/* internal, no cap */
-	.get_pendown_state	= lubbock_ads7846_pendown_state,
-	// .x_plate_ohms		= 500,	/* GUESS! */
-	// .y_plate_ohms		= 500,	/* GUESS! */
-};
-
-static void ads7846_cs(u32 command)
-{
-	static const unsigned	TS_nCS = 1 << 11;
-	lubbock_set_misc_wr(TS_nCS, (command == PXA2XX_CS_ASSERT) ? 0 : TS_nCS);
-}
-
-static struct pxa2xx_spi_chip ads_hw = {
-	.tx_threshold		= 1,
-	.rx_threshold		= 2,
-	.cs_control		= ads7846_cs,
-};
-
-static struct spi_board_info spi_board_info[] __initdata = { {
-	.modalias	= "ads7846",
-	.platform_data	= &ads_info,
-	.controller_data = &ads_hw,
-	.irq		= LUBBOCK_BB_IRQ,
-	.max_speed_hz	= 120000 /* max sample rate at 3V */
-				* 26 /* command + data + overhead */,
-	.bus_num	= 1,
-	.chip_select	= 0,
-},
-};
-
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.name	= "smc91x-regs",
-		.start	= 0x0c000c00,
-		.end	= 0x0c0fffff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= LUBBOCK_ETH_IRQ,
-		.end	= LUBBOCK_ETH_IRQ,
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	},
-	[2] = {
-		.name	= "smc91x-attrib",
-		.start	= 0x0e000000,
-		.end	= 0x0e0fffff,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct smc91x_platdata lubbock_smc91x_info = {
-	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT | SMC91X_IO_SHIFT_2,
-};
-
-static struct platform_device smc91x_device = {
-	.name		= "smc91x",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(smc91x_resources),
-	.resource	= smc91x_resources,
-	.dev		= {
-		.platform_data = &lubbock_smc91x_info,
-	},
-};
-
-static struct resource flash_resources[] = {
-	[0] = {
-		.start	= 0x00000000,
-		.end	= SZ_64M - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= 0x04000000,
-		.end	= 0x04000000 + SZ_64M - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct mtd_partition lubbock_partitions[] = {
-	{
-		.name =		"Bootloader",
-		.size =		0x00040000,
-		.offset =	0,
-		.mask_flags =	MTD_WRITEABLE  /* force read-only */
-	},{
-		.name =		"Kernel",
-		.size =		0x00100000,
-		.offset =	0x00040000,
-	},{
-		.name =		"Filesystem",
-		.size =		MTDPART_SIZ_FULL,
-		.offset =	0x00140000
-	}
-};
-
-static struct flash_platform_data lubbock_flash_data[2] = {
-	{
-		.map_name	= "cfi_probe",
-		.parts		= lubbock_partitions,
-		.nr_parts	= ARRAY_SIZE(lubbock_partitions),
-	}, {
-		.map_name	= "cfi_probe",
-		.parts		= NULL,
-		.nr_parts	= 0,
-	}
-};
-
-static struct platform_device lubbock_flash_device[2] = {
-	{
-		.name		= "pxa2xx-flash",
-		.id		= 0,
-		.dev = {
-			.platform_data = &lubbock_flash_data[0],
-		},
-		.resource = &flash_resources[0],
-		.num_resources = 1,
-	},
-	{
-		.name		= "pxa2xx-flash",
-		.id		= 1,
-		.dev = {
-			.platform_data = &lubbock_flash_data[1],
-		},
-		.resource = &flash_resources[1],
-		.num_resources = 1,
-	},
-};
-
-static struct platform_device *devices[] __initdata = {
-	&sa1111_device,
-	&smc91x_device,
-	&lubbock_flash_device[0],
-	&lubbock_flash_device[1],
-};
-
-static struct pxafb_mode_info sharp_lm8v31_mode = {
-	.pixclock	= 270000,
-	.xres		= 640,
-	.yres		= 480,
-	.bpp		= 16,
-	.hsync_len	= 1,
-	.left_margin	= 3,
-	.right_margin	= 3,
-	.vsync_len	= 1,
-	.upper_margin	= 0,
-	.lower_margin	= 0,
-	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-	.cmap_greyscale	= 0,
-};
-
-static struct pxafb_mach_info sharp_lm8v31 = {
-	.modes		= &sharp_lm8v31_mode,
-	.num_modes	= 1,
-	.cmap_inverse	= 0,
-	.cmap_static	= 0,
-	.lcd_conn	= LCD_COLOR_DSTN_16BPP | LCD_PCLK_EDGE_FALL |
-			  LCD_AC_BIAS_FREQ(255),
-};
-
-#define	MMC_POLL_RATE		msecs_to_jiffies(1000)
-
-static void lubbock_mmc_poll(unsigned long);
-static irq_handler_t mmc_detect_int;
-
-static struct timer_list mmc_timer = {
-	.function	= lubbock_mmc_poll,
-};
-
-static void lubbock_mmc_poll(unsigned long data)
-{
-	unsigned long flags;
-
-	/* clear any previous irq state, then ... */
-	local_irq_save(flags);
-	LUB_IRQ_SET_CLR &= ~(1 << 0);
-	local_irq_restore(flags);
-
-	/* poll until mmc/sd card is removed */
-	if (LUB_IRQ_SET_CLR & (1 << 0))
-		mod_timer(&mmc_timer, jiffies + MMC_POLL_RATE);
-	else {
-		(void) mmc_detect_int(LUBBOCK_SD_IRQ, (void *)data);
-		enable_irq(LUBBOCK_SD_IRQ);
-	}
-}
-
-static irqreturn_t lubbock_detect_int(int irq, void *data)
-{
-	/* IRQ is level triggered; disable, and poll for removal */
-	disable_irq(irq);
-	mod_timer(&mmc_timer, jiffies + MMC_POLL_RATE);
-
-	return mmc_detect_int(irq, data);
-}
-
-static int lubbock_mci_init(struct device *dev,
-		irq_handler_t detect_int,
-		void *data)
-{
-	/* detect card insert/eject */
-	mmc_detect_int = detect_int;
-	init_timer(&mmc_timer);
-	mmc_timer.data = (unsigned long) data;
-	return request_irq(LUBBOCK_SD_IRQ, lubbock_detect_int,
-			IRQF_SAMPLE_RANDOM, "lubbock-sd-detect", data);
-}
-
-static int lubbock_mci_get_ro(struct device *dev)
-{
-	return (LUB_MISC_RD & (1 << 2)) != 0;
-}
-
-static void lubbock_mci_exit(struct device *dev, void *data)
-{
-	free_irq(LUBBOCK_SD_IRQ, data);
-	del_timer_sync(&mmc_timer);
-}
-
-static struct pxamci_platform_data lubbock_mci_platform_data = {
-	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
-	.detect_delay_ms	= 10,
-	.init 			= lubbock_mci_init,
-	.get_ro			= lubbock_mci_get_ro,
-	.exit 			= lubbock_mci_exit,
-	.gpio_card_detect	= -1,
-	.gpio_card_ro		= -1,
-	.gpio_power		= -1,
-};
-
-static void lubbock_irda_transceiver_mode(struct device *dev, int mode)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-	if (mode & IR_SIRMODE) {
-		LUB_MISC_WR &= ~(1 << 4);
-	} else if (mode & IR_FIRMODE) {
-		LUB_MISC_WR |= 1 << 4;
-	}
-	pxa2xx_transceiver_mode(dev, mode);
-	local_irq_restore(flags);
-}
-
-static struct pxaficp_platform_data lubbock_ficp_platform_data = {
-	.gpio_pwdown		= -1,
-	.transceiver_cap	= IR_SIRMODE | IR_FIRMODE,
-	.transceiver_mode	= lubbock_irda_transceiver_mode,
-};
-
-static void __init lubbock_init(void)
-{
-	int flashboot = (LUB_CONF_SWITCHES & 1);
-
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(lubbock_pin_config));
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	clk_add_alias("SA1111_CLK", NULL, "GPIO11_CLK", NULL);
-	pxa_set_udc_info(&udc_info);
-	pxa_set_fb_info(NULL, &sharp_lm8v31);
-	pxa_set_mci_info(&lubbock_mci_platform_data);
-	pxa_set_ficp_info(&lubbock_ficp_platform_data);
-	pxa_set_ac97_info(NULL);
-
-	lubbock_flash_data[0].width = lubbock_flash_data[1].width =
-		(__raw_readl(BOOT_DEF) & 1) ? 2 : 4;
-	/* Compensate for the nROMBT switch which swaps the flash banks */
-	printk(KERN_NOTICE "Lubbock configured to boot from %s (bank %d)\n",
-	       flashboot?"Flash":"ROM", flashboot);
-
-	lubbock_flash_data[flashboot^1].name = "application-flash";
-	lubbock_flash_data[flashboot].name = "boot-rom";
-	(void) platform_add_devices(devices, ARRAY_SIZE(devices));
-
-	pxa2xx_set_spi_info(1, &pxa_ssp_master_info);
-	spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
-}
-
-static struct map_desc lubbock_io_desc[] __initdata = {
-  	{	/* CPLD */
-		.virtual	=  LUBBOCK_FPGA_VIRT,
-		.pfn		= __phys_to_pfn(LUBBOCK_FPGA_PHYS),
-		.length		= 0x00100000,
-		.type		= MT_DEVICE
-	}
-};
-
-static void __init lubbock_map_io(void)
-{
-	pxa25x_map_io();
-	iotable_init(lubbock_io_desc, ARRAY_SIZE(lubbock_io_desc));
-
-	PCFR |= PCFR_OPDE;
-}
-
-MACHINE_START(LUBBOCK, "Intel DBPXA250 Development Platform (aka Lubbock)")
-	/* Maintainer: MontaVista Software Inc. */
-	.map_io		= lubbock_map_io,
-	.nr_irqs	= LUBBOCK_NR_IRQS,
-	.init_irq	= lubbock_init_irq,
-	.handle_irq	= pxa25x_handle_irq,
-	.timer		= &pxa_timer,
-	.init_machine	= lubbock_init,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/magician.c b/ANDROID_3.4.5/arch/arm/mach-pxa/magician.c
deleted file mode 100644
index 8de0651d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/magician.c
+++ /dev/null
@@ -1,784 +0,0 @@
-/*
- * Support for HTC Magician PDA phones:
- * i-mate JAM, O2 Xda mini, Orange SPV M500, Qtek s100, Qtek s110
- * and T-Mobile MDA Compact.
- *
- * Copyright (c) 2006-2007 Philipp Zabel
- *
- * Based on hx4700.c, spitz.c and others.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/mfd/htc-egpio.h>
-#include <linux/mfd/htc-pasic3.h>
-#include <linux/mtd/physmap.h>
-#include <linux/pda_power.h>
-#include <linux/pwm_backlight.h>
-#include <linux/regulator/driver.h>
-#include <linux/regulator/gpio-regulator.h>
-#include <linux/regulator/machine.h>
-#include <linux/usb/gpio_vbus.h>
-#include <linux/i2c/pxa-i2c.h>
-
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/system_info.h>
-
-#include <mach/pxa27x.h>
-#include <mach/magician.h>
-#include <mach/pxafb.h>
-#include <mach/mmc.h>
-#include <mach/irda.h>
-#include <mach/ohci.h>
-
-#include "devices.h"
-#include "generic.h"
-
-static unsigned long magician_pin_config[] __initdata = {
-
-	/* SDRAM and Static Memory I/O Signals */
-	GPIO20_nSDCS_2,
-	GPIO21_nSDCS_3,
-	GPIO15_nCS_1,
-	GPIO78_nCS_2,   /* PASIC3 */
-	GPIO79_nCS_3,   /* EGPIO CPLD */
-	GPIO80_nCS_4,
-	GPIO33_nCS_5,
-
-	/* I2C */
-	GPIO117_I2C_SCL,
-	GPIO118_I2C_SDA,
-
-	/* PWM 0 */
-	GPIO16_PWM0_OUT,
-
-	/* I2S */
-	GPIO28_I2S_BITCLK_OUT,
-	GPIO29_I2S_SDATA_IN,
-	GPIO31_I2S_SYNC,
-	GPIO113_I2S_SYSCLK,
-
-	/* SSP 1 */
-	GPIO23_SSP1_SCLK,
-	GPIO24_SSP1_SFRM,
-	GPIO25_SSP1_TXD,
-
-	/* SSP 2 */
-	GPIO19_SSP2_SCLK,
-	GPIO14_SSP2_SFRM,
-	GPIO89_SSP2_TXD,
-	GPIO88_SSP2_RXD,
-
-	/* MMC */
-	GPIO32_MMC_CLK,
-	GPIO92_MMC_DAT_0,
-	GPIO109_MMC_DAT_1,
-	GPIO110_MMC_DAT_2,
-	GPIO111_MMC_DAT_3,
-	GPIO112_MMC_CMD,
-
-	/* LCD */
-	GPIOxx_LCD_TFT_16BPP,
-
-	/* QCI */
-	GPIO12_CIF_DD_7,
-	GPIO17_CIF_DD_6,
-	GPIO50_CIF_DD_3,
-	GPIO51_CIF_DD_2,
-	GPIO52_CIF_DD_4,
-	GPIO53_CIF_MCLK,
-	GPIO54_CIF_PCLK,
-	GPIO55_CIF_DD_1,
-	GPIO81_CIF_DD_0,
-	GPIO82_CIF_DD_5,
-	GPIO84_CIF_FV,
-	GPIO85_CIF_LV,
-
-	/* Magician specific input GPIOs */
-	GPIO9_GPIO,	/* unknown */
-	GPIO10_GPIO,	/* GSM_IRQ */
-	GPIO13_GPIO,	/* CPLD_IRQ */
-	GPIO107_GPIO,	/* DS1WM_IRQ */
-	GPIO108_GPIO,	/* GSM_READY */
-	GPIO115_GPIO,	/* nPEN_IRQ */
-
-	/* I2C */
-	GPIO117_I2C_SCL,
-	GPIO118_I2C_SDA,
-};
-
-/*
- * IRDA
- */
-
-static struct pxaficp_platform_data magician_ficp_info = {
-	.gpio_pwdown		= GPIO83_MAGICIAN_nIR_EN,
-	.transceiver_cap	= IR_SIRMODE | IR_OFF,
-};
-
-/*
- * GPIO Keys
- */
-
-#define INIT_KEY(_code, _gpio, _desc)	\
-	{				\
-		.code   = KEY_##_code,	\
-		.gpio   = _gpio,	\
-		.desc   = _desc,	\
-		.type   = EV_KEY,	\
-		.wakeup = 1,		\
-	}
-
-static struct gpio_keys_button magician_button_table[] = {
-	INIT_KEY(POWER,      GPIO0_MAGICIAN_KEY_POWER,      "Power button"),
-	INIT_KEY(ESC,        GPIO37_MAGICIAN_KEY_HANGUP,    "Hangup button"),
-	INIT_KEY(F10,        GPIO38_MAGICIAN_KEY_CONTACTS,  "Contacts button"),
-	INIT_KEY(CALENDAR,   GPIO90_MAGICIAN_KEY_CALENDAR,  "Calendar button"),
-	INIT_KEY(CAMERA,     GPIO91_MAGICIAN_KEY_CAMERA,    "Camera button"),
-	INIT_KEY(UP,         GPIO93_MAGICIAN_KEY_UP,        "Up button"),
-	INIT_KEY(DOWN,       GPIO94_MAGICIAN_KEY_DOWN,      "Down button"),
-	INIT_KEY(LEFT,       GPIO95_MAGICIAN_KEY_LEFT,      "Left button"),
-	INIT_KEY(RIGHT,      GPIO96_MAGICIAN_KEY_RIGHT,     "Right button"),
-	INIT_KEY(KPENTER,    GPIO97_MAGICIAN_KEY_ENTER,     "Action button"),
-	INIT_KEY(RECORD,     GPIO98_MAGICIAN_KEY_RECORD,    "Record button"),
-	INIT_KEY(VOLUMEUP,   GPIO100_MAGICIAN_KEY_VOL_UP,   "Volume up"),
-	INIT_KEY(VOLUMEDOWN, GPIO101_MAGICIAN_KEY_VOL_DOWN, "Volume down"),
-	INIT_KEY(PHONE,      GPIO102_MAGICIAN_KEY_PHONE,    "Phone button"),
-	INIT_KEY(PLAY,       GPIO99_MAGICIAN_HEADPHONE_IN,  "Headset button"),
-};
-
-static struct gpio_keys_platform_data gpio_keys_data = {
-	.buttons  = magician_button_table,
-	.nbuttons = ARRAY_SIZE(magician_button_table),
-};
-
-static struct platform_device gpio_keys = {
-	.name = "gpio-keys",
-	.dev  = {
-		.platform_data = &gpio_keys_data,
-	},
-	.id   = -1,
-};
-
-
-/*
- * EGPIO (Xilinx CPLD)
- *
- * 7 32-bit aligned 8-bit registers: 3x output, 1x irq, 3x input
- */
-
-static struct resource egpio_resources[] = {
-	[0] = {
-		.start = PXA_CS3_PHYS,
-		.end   = PXA_CS3_PHYS + 0x20 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = PXA_GPIO_TO_IRQ(GPIO13_MAGICIAN_CPLD_IRQ),
-		.end   = PXA_GPIO_TO_IRQ(GPIO13_MAGICIAN_CPLD_IRQ),
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct htc_egpio_chip egpio_chips[] = {
-	[0] = {
-		.reg_start = 0,
-		.gpio_base = MAGICIAN_EGPIO(0, 0),
-		.num_gpios = 24,
-		.direction = HTC_EGPIO_OUTPUT,
-		.initial_values = 0x40, /* EGPIO_MAGICIAN_GSM_RESET */
-	},
-	[1] = {
-		.reg_start = 4,
-		.gpio_base = MAGICIAN_EGPIO(4, 0),
-		.num_gpios = 24,
-		.direction = HTC_EGPIO_INPUT,
-	},
-};
-
-static struct htc_egpio_platform_data egpio_info = {
-	.reg_width    = 8,
-	.bus_width    = 32,
-	.irq_base     = IRQ_BOARD_START,
-	.num_irqs     = 4,
-	.ack_register = 3,
-	.chip         = egpio_chips,
-	.num_chips    = ARRAY_SIZE(egpio_chips),
-};
-
-static struct platform_device egpio = {
-	.name          = "htc-egpio",
-	.id            = -1,
-	.resource      = egpio_resources,
-	.num_resources = ARRAY_SIZE(egpio_resources),
-	.dev = {
-		.platform_data = &egpio_info,
-	},
-};
-
-/*
- * LCD - Toppoly TD028STEB1 or Samsung LTP280QV
- */
-
-static struct pxafb_mode_info toppoly_modes[] = {
-	{
-		.pixclock     = 96153,
-		.bpp          = 16,
-		.xres         = 240,
-		.yres         = 320,
-		.hsync_len    = 11,
-		.vsync_len    = 3,
-		.left_margin  = 19,
-		.upper_margin = 2,
-		.right_margin = 10,
-		.lower_margin = 2,
-		.sync         = 0,
-	},
-};
-
-static struct pxafb_mode_info samsung_modes[] = {
-	{
-		.pixclock     = 96153,
-		.bpp          = 16,
-		.xres         = 240,
-		.yres         = 320,
-		.hsync_len    = 8,
-		.vsync_len    = 4,
-		.left_margin  = 9,
-		.upper_margin = 4,
-		.right_margin = 9,
-		.lower_margin = 4,
-		.sync         = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-	},
-};
-
-static void toppoly_lcd_power(int on, struct fb_var_screeninfo *si)
-{
-	pr_debug("Toppoly LCD power\n");
-
-	if (on) {
-		pr_debug("on\n");
-		gpio_set_value(EGPIO_MAGICIAN_TOPPOLY_POWER, 1);
-		gpio_set_value(GPIO106_MAGICIAN_LCD_POWER_3, 1);
-		udelay(2000);
-		gpio_set_value(EGPIO_MAGICIAN_LCD_POWER, 1);
-		udelay(2000);
-		/* FIXME: enable LCDC here */
-		udelay(2000);
-		gpio_set_value(GPIO104_MAGICIAN_LCD_POWER_1, 1);
-		udelay(2000);
-		gpio_set_value(GPIO105_MAGICIAN_LCD_POWER_2, 1);
-	} else {
-		pr_debug("off\n");
-		msleep(15);
-		gpio_set_value(GPIO105_MAGICIAN_LCD_POWER_2, 0);
-		udelay(500);
-		gpio_set_value(GPIO104_MAGICIAN_LCD_POWER_1, 0);
-		udelay(1000);
-		gpio_set_value(GPIO106_MAGICIAN_LCD_POWER_3, 0);
-		gpio_set_value(EGPIO_MAGICIAN_LCD_POWER, 0);
-	}
-}
-
-static void samsung_lcd_power(int on, struct fb_var_screeninfo *si)
-{
-	pr_debug("Samsung LCD power\n");
-
-	if (on) {
-		pr_debug("on\n");
-		if (system_rev < 3)
-			gpio_set_value(GPIO75_MAGICIAN_SAMSUNG_POWER, 1);
-		else
-			gpio_set_value(EGPIO_MAGICIAN_LCD_POWER, 1);
-		mdelay(10);
-		gpio_set_value(GPIO106_MAGICIAN_LCD_POWER_3, 1);
-		mdelay(10);
-		gpio_set_value(GPIO104_MAGICIAN_LCD_POWER_1, 1);
-		mdelay(30);
-		gpio_set_value(GPIO105_MAGICIAN_LCD_POWER_2, 1);
-		mdelay(10);
-	} else {
-		pr_debug("off\n");
-		mdelay(10);
-		gpio_set_value(GPIO105_MAGICIAN_LCD_POWER_2, 0);
-		mdelay(30);
-		gpio_set_value(GPIO104_MAGICIAN_LCD_POWER_1, 0);
-		mdelay(10);
-		gpio_set_value(GPIO106_MAGICIAN_LCD_POWER_3, 0);
-		mdelay(10);
-		if (system_rev < 3)
-			gpio_set_value(GPIO75_MAGICIAN_SAMSUNG_POWER, 0);
-		else
-			gpio_set_value(EGPIO_MAGICIAN_LCD_POWER, 0);
-	}
-}
-
-static struct pxafb_mach_info toppoly_info = {
-	.modes           = toppoly_modes,
-	.num_modes       = 1,
-	.fixed_modes     = 1,
-	.lcd_conn	= LCD_COLOR_TFT_16BPP,
-	.pxafb_lcd_power = toppoly_lcd_power,
-};
-
-static struct pxafb_mach_info samsung_info = {
-	.modes           = samsung_modes,
-	.num_modes       = 1,
-	.fixed_modes     = 1,
-	.lcd_conn	 = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |\
-			   LCD_ALTERNATE_MAPPING,
-	.pxafb_lcd_power = samsung_lcd_power,
-};
-
-/*
- * Backlight
- */
-
-static struct gpio magician_bl_gpios[] = {
-	{ EGPIO_MAGICIAN_BL_POWER,  GPIOF_DIR_OUT, "Backlight power" },
-	{ EGPIO_MAGICIAN_BL_POWER2, GPIOF_DIR_OUT, "Backlight power 2" },
-};
-
-static int magician_backlight_init(struct device *dev)
-{
-	return gpio_request_array(ARRAY_AND_SIZE(magician_bl_gpios));
-}
-
-static int magician_backlight_notify(struct device *dev, int brightness)
-{
-	gpio_set_value(EGPIO_MAGICIAN_BL_POWER, brightness);
-	if (brightness >= 200) {
-		gpio_set_value(EGPIO_MAGICIAN_BL_POWER2, 1);
-		return brightness - 72;
-	} else {
-		gpio_set_value(EGPIO_MAGICIAN_BL_POWER2, 0);
-		return brightness;
-	}
-}
-
-static void magician_backlight_exit(struct device *dev)
-{
-	gpio_free_array(ARRAY_AND_SIZE(magician_bl_gpios));
-}
-
-static struct platform_pwm_backlight_data backlight_data = {
-	.pwm_id         = 0,
-	.max_brightness = 272,
-	.dft_brightness = 100,
-	.pwm_period_ns  = 30923,
-	.init           = magician_backlight_init,
-	.notify         = magician_backlight_notify,
-	.exit           = magician_backlight_exit,
-};
-
-static struct platform_device backlight = {
-	.name = "pwm-backlight",
-	.id   = -1,
-	.dev  = {
-		.parent        = &pxa27x_device_pwm0.dev,
-		.platform_data = &backlight_data,
-	},
-};
-
-/*
- * LEDs
- */
-
-static struct gpio_led gpio_leds[] = {
-	{
-		.name = "magician::vibra",
-		.default_trigger = "none",
-		.gpio = GPIO22_MAGICIAN_VIBRA_EN,
-	},
-	{
-		.name = "magician::phone_bl",
-		.default_trigger = "backlight",
-		.gpio = GPIO103_MAGICIAN_LED_KP,
-	},
-};
-
-static struct gpio_led_platform_data gpio_led_info = {
-	.leds = gpio_leds,
-	.num_leds = ARRAY_SIZE(gpio_leds),
-};
-
-static struct platform_device leds_gpio = {
-	.name = "leds-gpio",
-	.id   = -1,
-	.dev  = {
-		.platform_data = &gpio_led_info,
-	},
-};
-
-static struct pasic3_led pasic3_leds[] = {
-	{
-		.led = {
-			.name            = "magician:red",
-			.default_trigger = "ds2760-battery.0-charging",
-		},
-		.hw_num = 0,
-		.bit2   = PASIC3_BIT2_LED0,
-		.mask   = PASIC3_MASK_LED0,
-	},
-	{
-		.led = {
-			.name            = "magician:green",
-			.default_trigger = "ds2760-battery.0-charging-or-full",
-		},
-		.hw_num = 1,
-		.bit2   = PASIC3_BIT2_LED1,
-		.mask   = PASIC3_MASK_LED1,
-	},
-	{
-		.led = {
-			.name            = "magician:blue",
-			.default_trigger = "bluetooth",
-		},
-		.hw_num = 2,
-		.bit2   = PASIC3_BIT2_LED2,
-		.mask   = PASIC3_MASK_LED2,
-	},
-};
-
-static struct pasic3_leds_machinfo pasic3_leds_info = {
-	.num_leds   = ARRAY_SIZE(pasic3_leds),
-	.power_gpio = EGPIO_MAGICIAN_LED_POWER,
-	.leds       = pasic3_leds,
-};
-
-/*
- * PASIC3 with DS1WM
- */
-
-static struct resource pasic3_resources[] = {
-	[0] = {
-		.start  = PXA_CS2_PHYS,
-		.end	= PXA_CS2_PHYS + 0x1b,
-		.flags  = IORESOURCE_MEM,
-	},
-	/* No IRQ handler in the PASIC3, DS1WM needs an external IRQ */
-	[1] = {
-		.start  = PXA_GPIO_TO_IRQ(GPIO107_MAGICIAN_DS1WM_IRQ),
-		.end    = PXA_GPIO_TO_IRQ(GPIO107_MAGICIAN_DS1WM_IRQ),
-		.flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	}
-};
-
-static struct pasic3_platform_data pasic3_platform_data = {
-	.led_pdata  = &pasic3_leds_info,
-	.clock_rate = 4000000,
-};
-
-static struct platform_device pasic3 = {
-	.name		= "pasic3",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(pasic3_resources),
-	.resource	= pasic3_resources,
-	.dev = {
-		.platform_data = &pasic3_platform_data,
-	},
-};
-
-/*
- * USB "Transceiver"
- */
-
-static struct resource gpio_vbus_resource = {
-	.flags = IORESOURCE_IRQ,
-	.start = IRQ_MAGICIAN_VBUS,
-	.end   = IRQ_MAGICIAN_VBUS,
-};
-
-static struct gpio_vbus_mach_info gpio_vbus_info = {
-	.gpio_pullup = GPIO27_MAGICIAN_USBC_PUEN,
-	.gpio_vbus   = EGPIO_MAGICIAN_CABLE_STATE_USB,
-};
-
-static struct platform_device gpio_vbus = {
-	.name          = "gpio-vbus",
-	.id            = -1,
-	.num_resources = 1,
-	.resource      = &gpio_vbus_resource,
-	.dev = {
-		.platform_data = &gpio_vbus_info,
-	},
-};
-
-/*
- * External power
- */
-
-static int power_supply_init(struct device *dev)
-{
-	return gpio_request(EGPIO_MAGICIAN_CABLE_STATE_AC, "CABLE_STATE_AC");
-}
-
-static int magician_is_ac_online(void)
-{
-	return gpio_get_value(EGPIO_MAGICIAN_CABLE_STATE_AC);
-}
-
-static void power_supply_exit(struct device *dev)
-{
-	gpio_free(EGPIO_MAGICIAN_CABLE_STATE_AC);
-}
-
-static char *magician_supplicants[] = {
-	"ds2760-battery.0", "backup-battery"
-};
-
-static struct pda_power_pdata power_supply_info = {
-	.init            = power_supply_init,
-	.is_ac_online    = magician_is_ac_online,
-	.exit            = power_supply_exit,
-	.supplied_to     = magician_supplicants,
-	.num_supplicants = ARRAY_SIZE(magician_supplicants),
-};
-
-static struct resource power_supply_resources[] = {
-	[0] = {
-		.name  = "ac",
-		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
-		         IORESOURCE_IRQ_LOWEDGE,
-		.start = IRQ_MAGICIAN_VBUS,
-		.end   = IRQ_MAGICIAN_VBUS,
-	},
-	[1] = {
-		.name  = "usb",
-		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
-		         IORESOURCE_IRQ_LOWEDGE,
-		.start = IRQ_MAGICIAN_VBUS,
-		.end   = IRQ_MAGICIAN_VBUS,
-	},
-};
-
-static struct platform_device power_supply = {
-	.name = "pda-power",
-	.id   = -1,
-	.dev  = {
-		.platform_data = &power_supply_info,
-	},
-	.resource      = power_supply_resources,
-	.num_resources = ARRAY_SIZE(power_supply_resources),
-};
-
-/*
- * Battery charger
- */
-
-static struct regulator_consumer_supply bq24022_consumers[] = {
-	{
-		.supply = "vbus_draw",
-	},
-	{
-		.supply = "ac_draw",
-	},
-};
-
-static struct regulator_init_data bq24022_init_data = {
-	.constraints = {
-		.max_uA         = 500000,
-		.valid_ops_mask = REGULATOR_CHANGE_CURRENT | REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies  = ARRAY_SIZE(bq24022_consumers),
-	.consumer_supplies      = bq24022_consumers,
-};
-
-static struct gpio bq24022_gpios[] = {
-	{ EGPIO_MAGICIAN_BQ24022_ISET2, GPIOF_OUT_INIT_LOW, "bq24022_iset2" },
-};
-
-static struct gpio_regulator_state bq24022_states[] = {
-	{ .value = 100000, .gpios = (0 << 0) },
-	{ .value = 500000, .gpios = (1 << 0) },
-};
-
-static struct gpio_regulator_config bq24022_info = {
-	.supply_name = "bq24022",
-
-	.enable_gpio = GPIO30_MAGICIAN_BQ24022_nCHARGE_EN,
-	.enable_high = 0,
-	.enabled_at_boot = 0,
-
-	.gpios = bq24022_gpios,
-	.nr_gpios = ARRAY_SIZE(bq24022_gpios),
-
-	.states = bq24022_states,
-	.nr_states = ARRAY_SIZE(bq24022_states),
-
-	.type = REGULATOR_CURRENT,
-	.init_data = &bq24022_init_data,
-};
-
-static struct platform_device bq24022 = {
-	.name = "gpio-regulator",
-	.id   = -1,
-	.dev  = {
-		.platform_data = &bq24022_info,
-	},
-};
-
-/*
- * MMC/SD
- */
-
-static int magician_mci_init(struct device *dev,
-				irq_handler_t detect_irq, void *data)
-{
-	return request_irq(IRQ_MAGICIAN_SD, detect_irq,
-				IRQF_DISABLED | IRQF_SAMPLE_RANDOM,
-				"mmc card detect", data);
-}
-
-static void magician_mci_exit(struct device *dev, void *data)
-{
-	free_irq(IRQ_MAGICIAN_SD, data);
-}
-
-static struct pxamci_platform_data magician_mci_info = {
-	.ocr_mask 		= MMC_VDD_32_33|MMC_VDD_33_34,
-	.init     		= magician_mci_init,
-	.exit     		= magician_mci_exit,
-	.gpio_card_detect	= -1,
-	.gpio_card_ro		= EGPIO_MAGICIAN_nSD_READONLY,
-	.gpio_card_ro_invert	= 1,
-	.gpio_power		= EGPIO_MAGICIAN_SD_POWER,
-};
-
-
-/*
- * USB OHCI
- */
-
-static struct pxaohci_platform_data magician_ohci_info = {
-	.port_mode	= PMM_PERPORT_MODE,
-	.flags		= ENABLE_PORT1 | ENABLE_PORT3 | POWER_CONTROL_LOW,
-	.power_budget	= 0,
-};
-
-
-/*
- * StrataFlash
- */
-
-static void magician_set_vpp(struct platform_device *pdev, int vpp)
-{
-	gpio_set_value(EGPIO_MAGICIAN_FLASH_VPP, vpp);
-}
-
-static struct resource strataflash_resource = {
-	.start = PXA_CS0_PHYS,
-	.end   = PXA_CS0_PHYS + SZ_64M - 1,
-	.flags = IORESOURCE_MEM,
-};
-
-static struct physmap_flash_data strataflash_data = {
-	.width = 4,
-	.set_vpp = magician_set_vpp,
-};
-
-static struct platform_device strataflash = {
-	.name          = "physmap-flash",
-	.id            = -1,
-	.resource      = &strataflash_resource,
-	.num_resources = 1,
-	.dev = {
-		.platform_data = &strataflash_data,
-	},
-};
-
-/*
- * I2C
- */
-
-static struct i2c_pxa_platform_data i2c_info = {
-	.fast_mode = 1,
-};
-
-/*
- * Platform devices
- */
-
-static struct platform_device *devices[] __initdata = {
-	&gpio_keys,
-	&egpio,
-	&backlight,
-	&pasic3,
-	&bq24022,
-	&gpio_vbus,
-	&power_supply,
-	&strataflash,
-	&leds_gpio,
-};
-
-static struct gpio magician_global_gpios[] = {
-	{ GPIO13_MAGICIAN_CPLD_IRQ,   GPIOF_IN, "CPLD_IRQ" },
-	{ GPIO107_MAGICIAN_DS1WM_IRQ, GPIOF_IN, "DS1WM_IRQ" },
-	{ GPIO104_MAGICIAN_LCD_POWER_1, GPIOF_OUT_INIT_LOW, "LCD power 1" },
-	{ GPIO105_MAGICIAN_LCD_POWER_2, GPIOF_OUT_INIT_LOW, "LCD power 2" },
-	{ GPIO106_MAGICIAN_LCD_POWER_3, GPIOF_OUT_INIT_LOW, "LCD power 3" },
-	{ GPIO83_MAGICIAN_nIR_EN, GPIOF_OUT_INIT_HIGH, "nIR_EN" },
-};
-
-static void __init magician_init(void)
-{
-	void __iomem *cpld;
-	int lcd_select;
-	int err;
-
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(magician_pin_config));
-	err = gpio_request_array(ARRAY_AND_SIZE(magician_global_gpios));
-	if (err)
-		pr_err("magician: Failed to request GPIOs: %d\n", err);
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	platform_add_devices(ARRAY_AND_SIZE(devices));
-
-	pxa_set_ficp_info(&magician_ficp_info);
-	pxa27x_set_i2c_power_info(NULL);
-	pxa_set_i2c_info(&i2c_info);
-	pxa_set_mci_info(&magician_mci_info);
-	pxa_set_ohci_info(&magician_ohci_info);
-
-	/* Check LCD type we have */
-	cpld = ioremap_nocache(PXA_CS3_PHYS, 0x1000);
-	if (cpld) {
-		u8 board_id = __raw_readb(cpld+0x14);
-		iounmap(cpld);
-		system_rev = board_id & 0x7;
-		lcd_select = board_id & 0x8;
-		pr_info("LCD type: %s\n", lcd_select ? "Samsung" : "Toppoly");
-		if (lcd_select && (system_rev < 3))
-			gpio_request_one(GPIO75_MAGICIAN_SAMSUNG_POWER,
-			                 GPIOF_OUT_INIT_LOW, "SAMSUNG_POWER");
-		pxa_set_fb_info(NULL, lcd_select ? &samsung_info : &toppoly_info);
-	} else
-		pr_err("LCD detection: CPLD mapping failed\n");
-}
-
-
-MACHINE_START(MAGICIAN, "HTC Magician")
-	.atag_offset = 0x100,
-	.map_io = pxa27x_map_io,
-	.nr_irqs = MAGICIAN_NR_IRQS,
-	.init_irq = pxa27x_init_irq,
-	.handle_irq = pxa27x_handle_irq,
-	.init_machine = magician_init,
-	.timer = &pxa_timer,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/mainstone.c b/ANDROID_3.4.5/arch/arm/mach-pxa/mainstone.c
deleted file mode 100644
index 1aebaf71..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/mainstone.c
+++ /dev/null
@@ -1,626 +0,0 @@
-/*
- *  linux/arch/arm/mach-pxa/mainstone.c
- *
- *  Support for the Intel HCDDBBVA0 Development Platform.
- *  (go figure how they came up with such name...)
- *
- *  Author:	Nicolas Pitre
- *  Created:	Nov 05, 2002
- *  Copyright:	MontaVista Software Inc.
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/syscore_ops.h>
-#include <linux/interrupt.h>
-#include <linux/sched.h>
-#include <linux/bitops.h>
-#include <linux/fb.h>
-#include <linux/ioport.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/input.h>
-#include <linux/gpio_keys.h>
-#include <linux/pwm_backlight.h>
-#include <linux/smc91x.h>
-#include <linux/i2c/pxa-i2c.h>
-
-#include <asm/types.h>
-#include <asm/setup.h>
-#include <asm/memory.h>
-#include <asm/mach-types.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/sizes.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/flash.h>
-
-#include <mach/pxa27x.h>
-#include <mach/mainstone.h>
-#include <mach/audio.h>
-#include <mach/pxafb.h>
-#include <mach/mmc.h>
-#include <mach/irda.h>
-#include <mach/ohci.h>
-#include <plat/pxa27x_keypad.h>
-#include <mach/smemc.h>
-
-#include "generic.h"
-#include "devices.h"
-
-static unsigned long mainstone_pin_config[] = {
-	/* Chip Select */
-	GPIO15_nCS_1,
-
-	/* LCD - 16bpp Active TFT */
-	GPIOxx_LCD_TFT_16BPP,
-	GPIO16_PWM0_OUT,	/* Backlight */
-
-	/* MMC */
-	GPIO32_MMC_CLK,
-	GPIO112_MMC_CMD,
-	GPIO92_MMC_DAT_0,
-	GPIO109_MMC_DAT_1,
-	GPIO110_MMC_DAT_2,
-	GPIO111_MMC_DAT_3,
-
-	/* USB Host Port 1 */
-	GPIO88_USBH1_PWR,
-	GPIO89_USBH1_PEN,
-
-	/* PC Card */
-	GPIO48_nPOE,
-	GPIO49_nPWE,
-	GPIO50_nPIOR,
-	GPIO51_nPIOW,
-	GPIO85_nPCE_1,
-	GPIO54_nPCE_2,
-	GPIO79_PSKTSEL,
-	GPIO55_nPREG,
-	GPIO56_nPWAIT,
-	GPIO57_nIOIS16,
-
-	/* AC97 */
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-	GPIO45_AC97_SYSCLK,
-
-	/* Keypad */
-	GPIO93_KP_DKIN_0,
-	GPIO94_KP_DKIN_1,
-	GPIO95_KP_DKIN_2,
-	GPIO100_KP_MKIN_0	| WAKEUP_ON_LEVEL_HIGH,
-	GPIO101_KP_MKIN_1	| WAKEUP_ON_LEVEL_HIGH,
-	GPIO102_KP_MKIN_2	| WAKEUP_ON_LEVEL_HIGH,
-	GPIO97_KP_MKIN_3	| WAKEUP_ON_LEVEL_HIGH,
-	GPIO98_KP_MKIN_4	| WAKEUP_ON_LEVEL_HIGH,
-	GPIO99_KP_MKIN_5	| WAKEUP_ON_LEVEL_HIGH,
-	GPIO103_KP_MKOUT_0,
-	GPIO104_KP_MKOUT_1,
-	GPIO105_KP_MKOUT_2,
-	GPIO106_KP_MKOUT_3,
-	GPIO107_KP_MKOUT_4,
-	GPIO108_KP_MKOUT_5,
-	GPIO96_KP_MKOUT_6,
-
-	/* I2C */
-	GPIO117_I2C_SCL,
-	GPIO118_I2C_SDA,
-
-	/* GPIO */
-	GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,
-};
-
-static unsigned long mainstone_irq_enabled;
-
-static void mainstone_mask_irq(struct irq_data *d)
-{
-	int mainstone_irq = (d->irq - MAINSTONE_IRQ(0));
-	MST_INTMSKENA = (mainstone_irq_enabled &= ~(1 << mainstone_irq));
-}
-
-static void mainstone_unmask_irq(struct irq_data *d)
-{
-	int mainstone_irq = (d->irq - MAINSTONE_IRQ(0));
-	/* the irq can be acknowledged only if deasserted, so it's done here */
-	MST_INTSETCLR &= ~(1 << mainstone_irq);
-	MST_INTMSKENA = (mainstone_irq_enabled |= (1 << mainstone_irq));
-}
-
-static struct irq_chip mainstone_irq_chip = {
-	.name		= "FPGA",
-	.irq_ack	= mainstone_mask_irq,
-	.irq_mask	= mainstone_mask_irq,
-	.irq_unmask	= mainstone_unmask_irq,
-};
-
-static void mainstone_irq_handler(unsigned int irq, struct irq_desc *desc)
-{
-	unsigned long pending = MST_INTSETCLR & mainstone_irq_enabled;
-	do {
-		/* clear useless edge notification */
-		desc->irq_data.chip->irq_ack(&desc->irq_data);
-		if (likely(pending)) {
-			irq = MAINSTONE_IRQ(0) + __ffs(pending);
-			generic_handle_irq(irq);
-		}
-		pending = MST_INTSETCLR & mainstone_irq_enabled;
-	} while (pending);
-}
-
-static void __init mainstone_init_irq(void)
-{
-	int irq;
-
-	pxa27x_init_irq();
-
-	/* setup extra Mainstone irqs */
-	for(irq = MAINSTONE_IRQ(0); irq <= MAINSTONE_IRQ(15); irq++) {
-		irq_set_chip_and_handler(irq, &mainstone_irq_chip,
-					 handle_level_irq);
-		if (irq == MAINSTONE_IRQ(10) || irq == MAINSTONE_IRQ(14))
-			set_irq_flags(irq, IRQF_VALID | IRQF_PROBE | IRQF_NOAUTOEN);
-		else
-			set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
-	}
-	set_irq_flags(MAINSTONE_IRQ(8), 0);
-	set_irq_flags(MAINSTONE_IRQ(12), 0);
-
-	MST_INTMSKENA = 0;
-	MST_INTSETCLR = 0;
-
-	irq_set_chained_handler(PXA_GPIO_TO_IRQ(0), mainstone_irq_handler);
-	irq_set_irq_type(PXA_GPIO_TO_IRQ(0), IRQ_TYPE_EDGE_FALLING);
-}
-
-#ifdef CONFIG_PM
-
-static void mainstone_irq_resume(void)
-{
-	MST_INTMSKENA = mainstone_irq_enabled;
-}
-
-static struct syscore_ops mainstone_irq_syscore_ops = {
-	.resume = mainstone_irq_resume,
-};
-
-static int __init mainstone_irq_device_init(void)
-{
-	if (machine_is_mainstone())
-		register_syscore_ops(&mainstone_irq_syscore_ops);
-
-	return 0;
-}
-
-device_initcall(mainstone_irq_device_init);
-
-#endif
-
-
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.start	= (MST_ETH_PHYS + 0x300),
-		.end	= (MST_ETH_PHYS + 0xfffff),
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= MAINSTONE_IRQ(3),
-		.end	= MAINSTONE_IRQ(3),
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	}
-};
-
-static struct smc91x_platdata mainstone_smc91x_info = {
-	.flags	= SMC91X_USE_8BIT | SMC91X_USE_16BIT | SMC91X_USE_32BIT |
-		  SMC91X_NOWAIT | SMC91X_USE_DMA,
-};
-
-static struct platform_device smc91x_device = {
-	.name		= "smc91x",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(smc91x_resources),
-	.resource	= smc91x_resources,
-	.dev		= {
-		.platform_data = &mainstone_smc91x_info,
-	},
-};
-
-static int mst_audio_startup(struct snd_pcm_substream *substream, void *priv)
-{
-	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
-		MST_MSCWR2 &= ~MST_MSCWR2_AC97_SPKROFF;
-	return 0;
-}
-
-static void mst_audio_shutdown(struct snd_pcm_substream *substream, void *priv)
-{
-	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
-		MST_MSCWR2 |= MST_MSCWR2_AC97_SPKROFF;
-}
-
-static long mst_audio_suspend_mask;
-
-static void mst_audio_suspend(void *priv)
-{
-	mst_audio_suspend_mask = MST_MSCWR2;
-	MST_MSCWR2 |= MST_MSCWR2_AC97_SPKROFF;
-}
-
-static void mst_audio_resume(void *priv)
-{
-	MST_MSCWR2 &= mst_audio_suspend_mask | ~MST_MSCWR2_AC97_SPKROFF;
-}
-
-static pxa2xx_audio_ops_t mst_audio_ops = {
-	.startup	= mst_audio_startup,
-	.shutdown	= mst_audio_shutdown,
-	.suspend	= mst_audio_suspend,
-	.resume		= mst_audio_resume,
-};
-
-static struct resource flash_resources[] = {
-	[0] = {
-		.start	= PXA_CS0_PHYS,
-		.end	= PXA_CS0_PHYS + SZ_64M - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= PXA_CS1_PHYS,
-		.end	= PXA_CS1_PHYS + SZ_64M - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct mtd_partition mainstoneflash0_partitions[] = {
-	{
-		.name =		"Bootloader",
-		.size =		0x00040000,
-		.offset =	0,
-		.mask_flags =	MTD_WRITEABLE  /* force read-only */
-	},{
-		.name =		"Kernel",
-		.size =		0x00400000,
-		.offset =	0x00040000,
-	},{
-		.name =		"Filesystem",
-		.size =		MTDPART_SIZ_FULL,
-		.offset =	0x00440000
-	}
-};
-
-static struct flash_platform_data mst_flash_data[2] = {
-	{
-		.map_name	= "cfi_probe",
-		.parts		= mainstoneflash0_partitions,
-		.nr_parts	= ARRAY_SIZE(mainstoneflash0_partitions),
-	}, {
-		.map_name	= "cfi_probe",
-		.parts		= NULL,
-		.nr_parts	= 0,
-	}
-};
-
-static struct platform_device mst_flash_device[2] = {
-	{
-		.name		= "pxa2xx-flash",
-		.id		= 0,
-		.dev = {
-			.platform_data = &mst_flash_data[0],
-		},
-		.resource = &flash_resources[0],
-		.num_resources = 1,
-	},
-	{
-		.name		= "pxa2xx-flash",
-		.id		= 1,
-		.dev = {
-			.platform_data = &mst_flash_data[1],
-		},
-		.resource = &flash_resources[1],
-		.num_resources = 1,
-	},
-};
-
-#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
-static struct platform_pwm_backlight_data mainstone_backlight_data = {
-	.pwm_id		= 0,
-	.max_brightness	= 1023,
-	.dft_brightness	= 1023,
-	.pwm_period_ns	= 78770,
-};
-
-static struct platform_device mainstone_backlight_device = {
-	.name		= "pwm-backlight",
-	.dev		= {
-		.parent = &pxa27x_device_pwm0.dev,
-		.platform_data = &mainstone_backlight_data,
-	},
-};
-
-static void __init mainstone_backlight_register(void)
-{
-	int ret = platform_device_register(&mainstone_backlight_device);
-	if (ret)
-		printk(KERN_ERR "mainstone: failed to register backlight device: %d\n", ret);
-}
-#else
-#define mainstone_backlight_register()	do { } while (0)
-#endif
-
-static struct pxafb_mode_info toshiba_ltm04c380k_mode = {
-	.pixclock		= 50000,
-	.xres			= 640,
-	.yres			= 480,
-	.bpp			= 16,
-	.hsync_len		= 1,
-	.left_margin		= 0x9f,
-	.right_margin		= 1,
-	.vsync_len		= 44,
-	.upper_margin		= 0,
-	.lower_margin		= 0,
-	.sync			= FB_SYNC_HOR_HIGH_ACT|FB_SYNC_VERT_HIGH_ACT,
-};
-
-static struct pxafb_mode_info toshiba_ltm035a776c_mode = {
-	.pixclock		= 110000,
-	.xres			= 240,
-	.yres			= 320,
-	.bpp			= 16,
-	.hsync_len		= 4,
-	.left_margin		= 8,
-	.right_margin		= 20,
-	.vsync_len		= 3,
-	.upper_margin		= 1,
-	.lower_margin		= 10,
-	.sync			= FB_SYNC_HOR_HIGH_ACT|FB_SYNC_VERT_HIGH_ACT,
-};
-
-static struct pxafb_mach_info mainstone_pxafb_info = {
-	.num_modes      	= 1,
-	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
-};
-
-static int mainstone_mci_init(struct device *dev, irq_handler_t mstone_detect_int, void *data)
-{
-	int err;
-
-	/* make sure SD/Memory Stick multiplexer's signals
-	 * are routed to MMC controller
-	 */
-	MST_MSCWR1 &= ~MST_MSCWR1_MS_SEL;
-
-	err = request_irq(MAINSTONE_MMC_IRQ, mstone_detect_int, IRQF_DISABLED,
-			     "MMC card detect", data);
-	if (err)
-		printk(KERN_ERR "mainstone_mci_init: MMC/SD: can't request MMC card detect IRQ\n");
-
-	return err;
-}
-
-static void mainstone_mci_setpower(struct device *dev, unsigned int vdd)
-{
-	struct pxamci_platform_data* p_d = dev->platform_data;
-
-	if (( 1 << vdd) & p_d->ocr_mask) {
-		printk(KERN_DEBUG "%s: on\n", __func__);
-		MST_MSCWR1 |= MST_MSCWR1_MMC_ON;
-		MST_MSCWR1 &= ~MST_MSCWR1_MS_SEL;
-	} else {
-		printk(KERN_DEBUG "%s: off\n", __func__);
-		MST_MSCWR1 &= ~MST_MSCWR1_MMC_ON;
-	}
-}
-
-static void mainstone_mci_exit(struct device *dev, void *data)
-{
-	free_irq(MAINSTONE_MMC_IRQ, data);
-}
-
-static struct pxamci_platform_data mainstone_mci_platform_data = {
-	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
-	.init 			= mainstone_mci_init,
-	.setpower 		= mainstone_mci_setpower,
-	.exit			= mainstone_mci_exit,
-	.gpio_card_detect	= -1,
-	.gpio_card_ro		= -1,
-	.gpio_power		= -1,
-};
-
-static void mainstone_irda_transceiver_mode(struct device *dev, int mode)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-	if (mode & IR_SIRMODE) {
-		MST_MSCWR1 &= ~MST_MSCWR1_IRDA_FIR;
-	} else if (mode & IR_FIRMODE) {
-		MST_MSCWR1 |= MST_MSCWR1_IRDA_FIR;
-	}
-	pxa2xx_transceiver_mode(dev, mode);
-	if (mode & IR_OFF) {
-		MST_MSCWR1 = (MST_MSCWR1 & ~MST_MSCWR1_IRDA_MASK) | MST_MSCWR1_IRDA_OFF;
-	} else {
-		MST_MSCWR1 = (MST_MSCWR1 & ~MST_MSCWR1_IRDA_MASK) | MST_MSCWR1_IRDA_FULL;
-	}
-	local_irq_restore(flags);
-}
-
-static struct pxaficp_platform_data mainstone_ficp_platform_data = {
-	.gpio_pwdown		= -1,
-	.transceiver_cap	= IR_SIRMODE | IR_FIRMODE | IR_OFF,
-	.transceiver_mode	= mainstone_irda_transceiver_mode,
-};
-
-static struct gpio_keys_button gpio_keys_button[] = {
-	[0] = {
-		.desc	= "wakeup",
-		.code	= KEY_SUSPEND,
-		.type	= EV_KEY,
-		.gpio	= 1,
-		.wakeup	= 1,
-	},
-};
-
-static struct gpio_keys_platform_data mainstone_gpio_keys = {
-	.buttons	= gpio_keys_button,
-	.nbuttons	= 1,
-};
-
-static struct platform_device mst_gpio_keys_device = {
-	.name		= "gpio-keys",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &mainstone_gpio_keys,
-	},
-};
-
-static struct platform_device *platform_devices[] __initdata = {
-	&smc91x_device,
-	&mst_flash_device[0],
-	&mst_flash_device[1],
-	&mst_gpio_keys_device,
-};
-
-static struct pxaohci_platform_data mainstone_ohci_platform_data = {
-	.port_mode	= PMM_PERPORT_MODE,
-	.flags		= ENABLE_PORT_ALL | POWER_CONTROL_LOW | POWER_SENSE_LOW,
-};
-
-#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
-static unsigned int mainstone_matrix_keys[] = {
-	KEY(0, 0, KEY_A), KEY(1, 0, KEY_B), KEY(2, 0, KEY_C),
-	KEY(3, 0, KEY_D), KEY(4, 0, KEY_E), KEY(5, 0, KEY_F),
-	KEY(0, 1, KEY_G), KEY(1, 1, KEY_H), KEY(2, 1, KEY_I),
-	KEY(3, 1, KEY_J), KEY(4, 1, KEY_K), KEY(5, 1, KEY_L),
-	KEY(0, 2, KEY_M), KEY(1, 2, KEY_N), KEY(2, 2, KEY_O),
-	KEY(3, 2, KEY_P), KEY(4, 2, KEY_Q), KEY(5, 2, KEY_R),
-	KEY(0, 3, KEY_S), KEY(1, 3, KEY_T), KEY(2, 3, KEY_U),
-	KEY(3, 3, KEY_V), KEY(4, 3, KEY_W), KEY(5, 3, KEY_X),
-	KEY(2, 4, KEY_Y), KEY(3, 4, KEY_Z),
-
-	KEY(0, 4, KEY_DOT),	/* . */
-	KEY(1, 4, KEY_CLOSE),	/* @ */
-	KEY(4, 4, KEY_SLASH),
-	KEY(5, 4, KEY_BACKSLASH),
-	KEY(0, 5, KEY_HOME),
-	KEY(1, 5, KEY_LEFTSHIFT),
-	KEY(2, 5, KEY_SPACE),
-	KEY(3, 5, KEY_SPACE),
-	KEY(4, 5, KEY_ENTER),
-	KEY(5, 5, KEY_BACKSPACE),
-
-	KEY(0, 6, KEY_UP),
-	KEY(1, 6, KEY_DOWN),
-	KEY(2, 6, KEY_LEFT),
-	KEY(3, 6, KEY_RIGHT),
-	KEY(4, 6, KEY_SELECT),
-};
-
-struct pxa27x_keypad_platform_data mainstone_keypad_info = {
-	.matrix_key_rows	= 6,
-	.matrix_key_cols	= 7,
-	.matrix_key_map		= mainstone_matrix_keys,
-	.matrix_key_map_size	= ARRAY_SIZE(mainstone_matrix_keys),
-
-	.enable_rotary0		= 1,
-	.rotary0_up_key		= KEY_UP,
-	.rotary0_down_key	= KEY_DOWN,
-
-	.debounce_interval	= 30,
-};
-
-static void __init mainstone_init_keypad(void)
-{
-	pxa_set_keypad_info(&mainstone_keypad_info);
-}
-#else
-static inline void mainstone_init_keypad(void) {}
-#endif
-
-static void __init mainstone_init(void)
-{
-	int SW7 = 0;  /* FIXME: get from SCR (Mst doc section 3.2.1.1) */
-
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(mainstone_pin_config));
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	mst_flash_data[0].width = (__raw_readl(BOOT_DEF) & 1) ? 2 : 4;
-	mst_flash_data[1].width = 4;
-
-	/* Compensate for SW7 which swaps the flash banks */
-	mst_flash_data[SW7].name = "processor-flash";
-	mst_flash_data[SW7 ^ 1].name = "mainboard-flash";
-
-	printk(KERN_NOTICE "Mainstone configured to boot from %s\n",
-	       mst_flash_data[0].name);
-
-	/* system bus arbiter setting
-	 * - Core_Park
-	 * - LCD_wt:DMA_wt:CORE_Wt = 2:3:4
-	 */
-	ARB_CNTRL = ARB_CORE_PARK | 0x234;
-
-	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
-
-	/* reading Mainstone's "Virtual Configuration Register"
-	   might be handy to select LCD type here */
-	if (0)
-		mainstone_pxafb_info.modes = &toshiba_ltm04c380k_mode;
-	else
-		mainstone_pxafb_info.modes = &toshiba_ltm035a776c_mode;
-
-	pxa_set_fb_info(NULL, &mainstone_pxafb_info);
-	mainstone_backlight_register();
-
-	pxa_set_mci_info(&mainstone_mci_platform_data);
-	pxa_set_ficp_info(&mainstone_ficp_platform_data);
-	pxa_set_ohci_info(&mainstone_ohci_platform_data);
-	pxa_set_i2c_info(NULL);
-	pxa_set_ac97_info(&mst_audio_ops);
-
-	mainstone_init_keypad();
-}
-
-
-static struct map_desc mainstone_io_desc[] __initdata = {
-  	{	/* CPLD */
-		.virtual	=  MST_FPGA_VIRT,
-		.pfn		= __phys_to_pfn(MST_FPGA_PHYS),
-		.length		= 0x00100000,
-		.type		= MT_DEVICE
-	}
-};
-
-static void __init mainstone_map_io(void)
-{
-	pxa27x_map_io();
-	iotable_init(mainstone_io_desc, ARRAY_SIZE(mainstone_io_desc));
-
- 	/*	for use I SRAM as framebuffer.	*/
- 	PSLR |= 0xF04;
- 	PCFR = 0x66;
-}
-
-MACHINE_START(MAINSTONE, "Intel HCDDBBVA0 Development Platform (aka Mainstone)")
-	/* Maintainer: MontaVista Software Inc. */
-	.atag_offset	= 0x100,	/* BLOB boot parameter setting */
-	.map_io		= mainstone_map_io,
-	.nr_irqs	= MAINSTONE_NR_IRQS,
-	.init_irq	= mainstone_init_irq,
-	.handle_irq	= pxa27x_handle_irq,
-	.timer		= &pxa_timer,
-	.init_machine	= mainstone_init,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/mfp-pxa2xx.c b/ANDROID_3.4.5/arch/arm/mach-pxa/mfp-pxa2xx.c
deleted file mode 100644
index ef0426a1..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/mfp-pxa2xx.c
+++ /dev/null
@@ -1,441 +0,0 @@
-/*
- *  linux/arch/arm/mach-pxa/mfp-pxa2xx.c
- *
- *  PXA2xx pin mux configuration support
- *
- *  The GPIOs on PXA2xx can be configured as one of many alternate
- *  functions, this is by concept samilar to the MFP configuration
- *  on PXA3xx,  what's more important, the low power pin state and
- *  wakeup detection are also supported by the same framework.
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-#include <linux/gpio.h>
-#include <linux/gpio-pxa.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/syscore_ops.h>
-
-#include <mach/pxa2xx-regs.h>
-#include <mach/mfp-pxa2xx.h>
-
-#include "generic.h"
-
-#define PGSR(x)		__REG2(0x40F00020, (x) << 2)
-#define __GAFR(u, x)	__REG2((u) ? 0x40E00058 : 0x40E00054, (x) << 3)
-#define GAFR_L(x)	__GAFR(0, x)
-#define GAFR_U(x)	__GAFR(1, x)
-
-#define BANK_OFF(n)	(((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2))
-#define GPLR(x)		__REG2(0x40E00000, BANK_OFF((x) >> 5))
-#define GPDR(x)		__REG2(0x40E00000, BANK_OFF((x) >> 5) + 0x0c)
-#define GPSR(x)		__REG2(0x40E00000, BANK_OFF((x) >> 5) + 0x18)
-#define GPCR(x)		__REG2(0x40E00000, BANK_OFF((x) >> 5) + 0x24)
-
-#define PWER_WE35	(1 << 24)
-
-struct gpio_desc {
-	unsigned	valid		: 1;
-	unsigned	can_wakeup	: 1;
-	unsigned	keypad_gpio	: 1;
-	unsigned	dir_inverted	: 1;
-	unsigned int	mask; /* bit mask in PWER or PKWR */
-	unsigned int	mux_mask; /* bit mask of muxed gpio bits, 0 if no mux */
-	unsigned long	config;
-};
-
-static struct gpio_desc gpio_desc[MFP_PIN_GPIO127 + 1];
-
-static unsigned long gpdr_lpm[4];
-
-static int __mfp_config_gpio(unsigned gpio, unsigned long c)
-{
-	unsigned long gafr, mask = GPIO_bit(gpio);
-	int bank = gpio_to_bank(gpio);
-	int uorl = !!(gpio & 0x10); /* GAFRx_U or GAFRx_L ? */
-	int shft = (gpio & 0xf) << 1;
-	int fn = MFP_AF(c);
-	int is_out = (c & MFP_DIR_OUT) ? 1 : 0;
-
-	if (fn > 3)
-		return -EINVAL;
-
-	/* alternate function and direction at run-time */
-	gafr = (uorl == 0) ? GAFR_L(bank) : GAFR_U(bank);
-	gafr = (gafr & ~(0x3 << shft)) | (fn << shft);
-
-	if (uorl == 0)
-		GAFR_L(bank) = gafr;
-	else
-		GAFR_U(bank) = gafr;
-
-	if (is_out ^ gpio_desc[gpio].dir_inverted)
-		GPDR(gpio) |= mask;
-	else
-		GPDR(gpio) &= ~mask;
-
-	/* alternate function and direction at low power mode */
-	switch (c & MFP_LPM_STATE_MASK) {
-	case MFP_LPM_DRIVE_HIGH:
-		PGSR(bank) |= mask;
-		is_out = 1;
-		break;
-	case MFP_LPM_DRIVE_LOW:
-		PGSR(bank) &= ~mask;
-		is_out = 1;
-		break;
-	case MFP_LPM_INPUT:
-	case MFP_LPM_DEFAULT:
-		break;
-	default:
-		/* warning and fall through, treat as MFP_LPM_DEFAULT */
-		pr_warning("%s: GPIO%d: unsupported low power mode\n",
-				__func__, gpio);
-		break;
-	}
-
-	if (is_out ^ gpio_desc[gpio].dir_inverted)
-		gpdr_lpm[bank] |= mask;
-	else
-		gpdr_lpm[bank] &= ~mask;
-
-	/* give early warning if MFP_LPM_CAN_WAKEUP is set on the
-	 * configurations of those pins not able to wakeup
-	 */
-	if ((c & MFP_LPM_CAN_WAKEUP) && !gpio_desc[gpio].can_wakeup) {
-		pr_warning("%s: GPIO%d unable to wakeup\n",
-				__func__, gpio);
-		return -EINVAL;
-	}
-
-	if ((c & MFP_LPM_CAN_WAKEUP) && is_out) {
-		pr_warning("%s: output GPIO%d unable to wakeup\n",
-				__func__, gpio);
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static inline int __mfp_validate(int mfp)
-{
-	int gpio = mfp_to_gpio(mfp);
-
-	if ((mfp > MFP_PIN_GPIO127) || !gpio_desc[gpio].valid) {
-		pr_warning("%s: GPIO%d is invalid pin\n", __func__, gpio);
-		return -1;
-	}
-
-	return gpio;
-}
-
-void pxa2xx_mfp_config(unsigned long *mfp_cfgs, int num)
-{
-	unsigned long flags;
-	unsigned long *c;
-	int i, gpio;
-
-	for (i = 0, c = mfp_cfgs; i < num; i++, c++) {
-
-		gpio = __mfp_validate(MFP_PIN(*c));
-		if (gpio < 0)
-			continue;
-
-		local_irq_save(flags);
-
-		gpio_desc[gpio].config = *c;
-		__mfp_config_gpio(gpio, *c);
-
-		local_irq_restore(flags);
-	}
-}
-
-void pxa2xx_mfp_set_lpm(int mfp, unsigned long lpm)
-{
-	unsigned long flags, c;
-	int gpio;
-
-	gpio = __mfp_validate(mfp);
-	if (gpio < 0)
-		return;
-
-	local_irq_save(flags);
-
-	c = gpio_desc[gpio].config;
-	c = (c & ~MFP_LPM_STATE_MASK) | lpm;
-	__mfp_config_gpio(gpio, c);
-
-	local_irq_restore(flags);
-}
-
-int gpio_set_wake(unsigned int gpio, unsigned int on)
-{
-	struct gpio_desc *d;
-	unsigned long c, mux_taken;
-
-	if (gpio > mfp_to_gpio(MFP_PIN_GPIO127))
-		return -EINVAL;
-
-	d = &gpio_desc[gpio];
-	c = d->config;
-
-	if (!d->valid)
-		return -EINVAL;
-
-	/* Allow keypad GPIOs to wakeup system when
-	 * configured as generic GPIOs.
-	 */
-	if (d->keypad_gpio && (MFP_AF(d->config) == 0) &&
-	    (d->config & MFP_LPM_CAN_WAKEUP)) {
-		if (on)
-			PKWR |= d->mask;
-		else
-			PKWR &= ~d->mask;
-		return 0;
-	}
-
-	mux_taken = (PWER & d->mux_mask) & (~d->mask);
-	if (on && mux_taken)
-		return -EBUSY;
-
-	if (d->can_wakeup && (c & MFP_LPM_CAN_WAKEUP)) {
-		if (on) {
-			PWER = (PWER & ~d->mux_mask) | d->mask;
-
-			if (c & MFP_LPM_EDGE_RISE)
-				PRER |= d->mask;
-			else
-				PRER &= ~d->mask;
-
-			if (c & MFP_LPM_EDGE_FALL)
-				PFER |= d->mask;
-			else
-				PFER &= ~d->mask;
-		} else {
-			PWER &= ~d->mask;
-			PRER &= ~d->mask;
-			PFER &= ~d->mask;
-		}
-	}
-	return 0;
-}
-
-#ifdef CONFIG_PXA25x
-static void __init pxa25x_mfp_init(void)
-{
-	int i;
-
-	/* running before pxa_gpio_probe() */
-#ifdef CONFIG_CPU_PXA26x
-	pxa_last_gpio = 89;
-#else
-	pxa_last_gpio = 84;
-#endif
-	for (i = 0; i <= pxa_last_gpio; i++)
-		gpio_desc[i].valid = 1;
-
-	for (i = 0; i <= 15; i++) {
-		gpio_desc[i].can_wakeup = 1;
-		gpio_desc[i].mask = GPIO_bit(i);
-	}
-
-	/* PXA26x has additional 4 GPIOs (86/87/88/89) which has the
-	 * direction bit inverted in GPDR2. See PXA26x DM 4.1.1.
-	 */
-	for (i = 86; i <= pxa_last_gpio; i++)
-		gpio_desc[i].dir_inverted = 1;
-}
-#else
-static inline void pxa25x_mfp_init(void) {}
-#endif /* CONFIG_PXA25x */
-
-#ifdef CONFIG_PXA27x
-static int pxa27x_pkwr_gpio[] = {
-	13, 16, 17, 34, 36, 37, 38, 39, 90, 91, 93, 94,
-	95, 96, 97, 98, 99, 100, 101, 102
-};
-
-int keypad_set_wake(unsigned int on)
-{
-	unsigned int i, gpio, mask = 0;
-	struct gpio_desc *d;
-
-	for (i = 0; i < ARRAY_SIZE(pxa27x_pkwr_gpio); i++) {
-
-		gpio = pxa27x_pkwr_gpio[i];
-		d = &gpio_desc[gpio];
-
-		/* skip if configured as generic GPIO */
-		if (MFP_AF(d->config) == 0)
-			continue;
-
-		if (d->config & MFP_LPM_CAN_WAKEUP)
-			mask |= gpio_desc[gpio].mask;
-	}
-
-	if (on)
-		PKWR |= mask;
-	else
-		PKWR &= ~mask;
-	return 0;
-}
-
-#define PWER_WEMUX2_GPIO38	(1 << 16)
-#define PWER_WEMUX2_GPIO53	(2 << 16)
-#define PWER_WEMUX2_GPIO40	(3 << 16)
-#define PWER_WEMUX2_GPIO36	(4 << 16)
-#define PWER_WEMUX2_MASK	(7 << 16)
-#define PWER_WEMUX3_GPIO31	(1 << 19)
-#define PWER_WEMUX3_GPIO113	(2 << 19)
-#define PWER_WEMUX3_MASK	(3 << 19)
-
-#define INIT_GPIO_DESC_MUXED(mux, gpio)				\
-do {								\
-	gpio_desc[(gpio)].can_wakeup = 1;			\
-	gpio_desc[(gpio)].mask = PWER_ ## mux ## _GPIO ##gpio;	\
-	gpio_desc[(gpio)].mux_mask = PWER_ ## mux ## _MASK;	\
-} while (0)
-
-static void __init pxa27x_mfp_init(void)
-{
-	int i, gpio;
-
-	pxa_last_gpio = 120;	/* running before pxa_gpio_probe() */
-	for (i = 0; i <= pxa_last_gpio; i++) {
-		/* skip GPIO2, 5, 6, 7, 8, they are not
-		 * valid pins allow configuration
-		 */
-		if (i == 2 || i == 5 || i == 6 || i == 7 || i == 8)
-			continue;
-
-		gpio_desc[i].valid = 1;
-	}
-
-	/* Keypad GPIOs */
-	for (i = 0; i < ARRAY_SIZE(pxa27x_pkwr_gpio); i++) {
-		gpio = pxa27x_pkwr_gpio[i];
-		gpio_desc[gpio].can_wakeup = 1;
-		gpio_desc[gpio].keypad_gpio = 1;
-		gpio_desc[gpio].mask = 1 << i;
-	}
-
-	/* Overwrite GPIO13 as a PWER wakeup source */
-	for (i = 0; i <= 15; i++) {
-		/* skip GPIO2, 5, 6, 7, 8 */
-		if (GPIO_bit(i) & 0x1e4)
-			continue;
-
-		gpio_desc[i].can_wakeup = 1;
-		gpio_desc[i].mask = GPIO_bit(i);
-	}
-
-	gpio_desc[35].can_wakeup = 1;
-	gpio_desc[35].mask = PWER_WE35;
-
-	INIT_GPIO_DESC_MUXED(WEMUX3, 31);
-	INIT_GPIO_DESC_MUXED(WEMUX3, 113);
-	INIT_GPIO_DESC_MUXED(WEMUX2, 38);
-	INIT_GPIO_DESC_MUXED(WEMUX2, 53);
-	INIT_GPIO_DESC_MUXED(WEMUX2, 40);
-	INIT_GPIO_DESC_MUXED(WEMUX2, 36);
-}
-#else
-static inline void pxa27x_mfp_init(void) {}
-#endif /* CONFIG_PXA27x */
-
-#ifdef CONFIG_PM
-static unsigned long saved_gafr[2][4];
-static unsigned long saved_gpdr[4];
-static unsigned long saved_gplr[4];
-static unsigned long saved_pgsr[4];
-
-static int pxa2xx_mfp_suspend(void)
-{
-	int i;
-
-	/* set corresponding PGSR bit of those marked MFP_LPM_KEEP_OUTPUT */
-	for (i = 0; i < pxa_last_gpio; i++) {
-		if ((gpio_desc[i].config & MFP_LPM_KEEP_OUTPUT) &&
-		    (GPDR(i) & GPIO_bit(i))) {
-			if (GPLR(i) & GPIO_bit(i))
-				PGSR(gpio_to_bank(i)) |= GPIO_bit(i);
-			else
-				PGSR(gpio_to_bank(i)) &= ~GPIO_bit(i);
-		}
-	}
-
-	for (i = 0; i <= gpio_to_bank(pxa_last_gpio); i++) {
-		saved_gafr[0][i] = GAFR_L(i);
-		saved_gafr[1][i] = GAFR_U(i);
-		saved_gpdr[i] = GPDR(i * 32);
-		saved_gplr[i] = GPLR(i * 32);
-		saved_pgsr[i] = PGSR(i);
-
-		GPSR(i * 32) = PGSR(i);
-		GPCR(i * 32) = ~PGSR(i);
-	}
-
-	/* set GPDR bits taking into account MFP_LPM_KEEP_OUTPUT */
-	for (i = 0; i < pxa_last_gpio; i++) {
-		if ((gpdr_lpm[gpio_to_bank(i)] & GPIO_bit(i)) ||
-		    ((gpio_desc[i].config & MFP_LPM_KEEP_OUTPUT) &&
-		     (saved_gpdr[gpio_to_bank(i)] & GPIO_bit(i))))
-			GPDR(i) |= GPIO_bit(i);
-		else
-			GPDR(i) &= ~GPIO_bit(i);
-	}
-
-	return 0;
-}
-
-static void pxa2xx_mfp_resume(void)
-{
-	int i;
-
-	for (i = 0; i <= gpio_to_bank(pxa_last_gpio); i++) {
-		GAFR_L(i) = saved_gafr[0][i];
-		GAFR_U(i) = saved_gafr[1][i];
-		GPSR(i * 32) = saved_gplr[i];
-		GPCR(i * 32) = ~saved_gplr[i];
-		GPDR(i * 32) = saved_gpdr[i];
-		PGSR(i) = saved_pgsr[i];
-	}
-	PSSR = PSSR_RDH | PSSR_PH;
-}
-#else
-#define pxa2xx_mfp_suspend	NULL
-#define pxa2xx_mfp_resume	NULL
-#endif
-
-struct syscore_ops pxa2xx_mfp_syscore_ops = {
-	.suspend	= pxa2xx_mfp_suspend,
-	.resume		= pxa2xx_mfp_resume,
-};
-
-static int __init pxa2xx_mfp_init(void)
-{
-	int i;
-
-	if (!cpu_is_pxa2xx())
-		return 0;
-
-	if (cpu_is_pxa25x())
-		pxa25x_mfp_init();
-
-	if (cpu_is_pxa27x())
-		pxa27x_mfp_init();
-
-	/* clear RDH bit to enable GPIO receivers after reset/sleep exit */
-	PSSR = PSSR_RDH;
-
-	/* initialize gafr_run[], pgsr_lpm[] from existing values */
-	for (i = 0; i <= gpio_to_bank(pxa_last_gpio); i++)
-		gpdr_lpm[i] = GPDR(i * 32);
-
-	return 0;
-}
-postcore_initcall(pxa2xx_mfp_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/mfp-pxa3xx.c b/ANDROID_3.4.5/arch/arm/mach-pxa/mfp-pxa3xx.c
deleted file mode 100644
index 89863a01..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/mfp-pxa3xx.c
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- * linux/arch/arm/mach-pxa/mfp.c
- *
- * PXA3xx Multi-Function Pin Support
- *
- * Copyright (C) 2007 Marvell Internation Ltd.
- *
- * 2007-08-21: eric miao <eric.miao@marvell.com>
- *             initial version
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/syscore_ops.h>
-
-#include <mach/hardware.h>
-#include <mach/mfp-pxa3xx.h>
-#include <mach/pxa3xx-regs.h>
-
-#ifdef CONFIG_PM
-/*
- * Configure the MFPs appropriately for suspend/resume.
- * FIXME: this should probably depend on which system state we're
- * entering - for instance, we might not want to place MFP pins in
- * a pull-down mode if they're an active low chip select, and we're
- * just entering standby.
- */
-static int pxa3xx_mfp_suspend(void)
-{
-	mfp_config_lpm();
-	return 0;
-}
-
-static void pxa3xx_mfp_resume(void)
-{
-	mfp_config_run();
-
-	/* clear RDH bit when MFP settings are restored
-	 *
-	 * NOTE: the last 3 bits DxS are write-1-to-clear so carefully
-	 * preserve them here in case they will be referenced later
-	 */
-	ASCR &= ~(ASCR_RDH | ASCR_D1S | ASCR_D2S | ASCR_D3S);
-}
-#else
-#define pxa3xx_mfp_suspend	NULL
-#define pxa3xx_mfp_resume	NULL
-#endif
-
-struct syscore_ops pxa3xx_mfp_syscore_ops = {
-	.suspend	= pxa3xx_mfp_suspend,
-	.resume		= pxa3xx_mfp_resume,
-};
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/mioa701.c b/ANDROID_3.4.5/arch/arm/mach-pxa/mioa701.c
deleted file mode 100644
index 061d5700..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/mioa701.c
+++ /dev/null
@@ -1,767 +0,0 @@
-/*
- * Handles the Mitac Mio A701 Board
- *
- * Copyright (C) 2008 Robert Jarzmik
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/syscore_ops.h>
-#include <linux/input.h>
-#include <linux/delay.h>
-#include <linux/gpio_keys.h>
-#include <linux/pwm_backlight.h>
-#include <linux/rtc.h>
-#include <linux/leds.h>
-#include <linux/gpio.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/pda_power.h>
-#include <linux/power_supply.h>
-#include <linux/wm97xx.h>
-#include <linux/mtd/physmap.h>
-#include <linux/usb/gpio_vbus.h>
-#include <linux/regulator/max1586.h>
-#include <linux/slab.h>
-#include <linux/i2c/pxa-i2c.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include <mach/pxa27x.h>
-#include <mach/regs-rtc.h>
-#include <plat/pxa27x_keypad.h>
-#include <mach/pxafb.h>
-#include <mach/mmc.h>
-#include <mach/udc.h>
-#include <mach/pxa27x-udc.h>
-#include <mach/camera.h>
-#include <mach/audio.h>
-#include <mach/smemc.h>
-#include <media/soc_camera.h>
-
-#include <mach/mioa701.h>
-
-#include "generic.h"
-#include "devices.h"
-
-static unsigned long mioa701_pin_config[] = {
-	/* Mio global */
-	MIO_CFG_OUT(GPIO9_CHARGE_EN, AF0, DRIVE_LOW),
-	MIO_CFG_OUT(GPIO18_POWEROFF, AF0, DRIVE_LOW),
-	MFP_CFG_OUT(GPIO3, AF0, DRIVE_HIGH),
-	MFP_CFG_OUT(GPIO4, AF0, DRIVE_HIGH),
-	MIO_CFG_IN(GPIO80_MAYBE_CHARGE_VDROP, AF0),
-
-	/* Backlight PWM 0 */
-	GPIO16_PWM0_OUT,
-
-	/* MMC */
-	GPIO32_MMC_CLK,
-	GPIO92_MMC_DAT_0,
-	GPIO109_MMC_DAT_1,
-	GPIO110_MMC_DAT_2,
-	GPIO111_MMC_DAT_3,
-	GPIO112_MMC_CMD,
-	MIO_CFG_IN(GPIO78_SDIO_RO, AF0),
-	MIO_CFG_IN(GPIO15_SDIO_INSERT, AF0),
-	MIO_CFG_OUT(GPIO91_SDIO_EN, AF0, DRIVE_LOW),
-
-	/* USB */
-	MIO_CFG_IN(GPIO13_nUSB_DETECT, AF0),
-	MIO_CFG_OUT(GPIO22_USB_ENABLE, AF0, DRIVE_LOW),
-
-	/* LCD */
-	GPIOxx_LCD_TFT_16BPP,
-
-	/* QCI */
-	GPIO12_CIF_DD_7,
-	GPIO17_CIF_DD_6,
-	GPIO50_CIF_DD_3,
-	GPIO51_CIF_DD_2,
-	GPIO52_CIF_DD_4,
-	GPIO53_CIF_MCLK,
-	GPIO54_CIF_PCLK,
-	GPIO55_CIF_DD_1,
-	GPIO81_CIF_DD_0,
-	GPIO82_CIF_DD_5,
-	GPIO84_CIF_FV,
-	GPIO85_CIF_LV,
-
-	/* Bluetooth */
-	MIO_CFG_IN(GPIO14_BT_nACTIVITY, AF0),
-	GPIO44_BTUART_CTS,
-	GPIO42_BTUART_RXD,
-	GPIO45_BTUART_RTS,
-	GPIO43_BTUART_TXD,
-	MIO_CFG_OUT(GPIO83_BT_ON, AF0, DRIVE_LOW),
-	MIO_CFG_OUT(GPIO77_BT_UNKNOWN1, AF0, DRIVE_HIGH),
-	MIO_CFG_OUT(GPIO86_BT_MAYBE_nRESET, AF0, DRIVE_HIGH),
-
-	/* GPS */
-	MIO_CFG_OUT(GPIO23_GPS_UNKNOWN1, AF0, DRIVE_LOW),
-	MIO_CFG_OUT(GPIO26_GPS_ON, AF0, DRIVE_LOW),
-	MIO_CFG_OUT(GPIO27_GPS_RESET, AF0, DRIVE_LOW),
-	MIO_CFG_OUT(GPIO106_GPS_UNKNOWN2, AF0, DRIVE_LOW),
-	MIO_CFG_OUT(GPIO107_GPS_UNKNOWN3, AF0, DRIVE_LOW),
-	GPIO46_STUART_RXD,
-	GPIO47_STUART_TXD,
-
-	/* GSM */
-	MIO_CFG_OUT(GPIO24_GSM_MOD_RESET_CMD, AF0, DRIVE_LOW),
-	MIO_CFG_OUT(GPIO88_GSM_nMOD_ON_CMD, AF0, DRIVE_HIGH),
-	MIO_CFG_OUT(GPIO90_GSM_nMOD_OFF_CMD, AF0, DRIVE_HIGH),
-	MIO_CFG_OUT(GPIO114_GSM_nMOD_DTE_UART_STATE, AF0, DRIVE_HIGH),
-	MIO_CFG_IN(GPIO25_GSM_MOD_ON_STATE, AF0),
-	MIO_CFG_IN(GPIO113_GSM_EVENT, AF0) | WAKEUP_ON_EDGE_BOTH,
-	GPIO34_FFUART_RXD,
-	GPIO35_FFUART_CTS,
-	GPIO36_FFUART_DCD,
-	GPIO37_FFUART_DSR,
-	GPIO39_FFUART_TXD,
-	GPIO40_FFUART_DTR,
-	GPIO41_FFUART_RTS,
-
-	/* Sound */
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-	GPIO89_AC97_SYSCLK,
-	MIO_CFG_IN(GPIO12_HPJACK_INSERT, AF0),
-
-	/* Leds */
-	MIO_CFG_OUT(GPIO10_LED_nCharging, AF0, DRIVE_HIGH),
-	MIO_CFG_OUT(GPIO97_LED_nBlue, AF0, DRIVE_HIGH),
-	MIO_CFG_OUT(GPIO98_LED_nOrange, AF0, DRIVE_HIGH),
-	MIO_CFG_OUT(GPIO82_LED_nVibra, AF0, DRIVE_HIGH),
-	MIO_CFG_OUT(GPIO115_LED_nKeyboard, AF0, DRIVE_HIGH),
-
-	/* Keyboard */
-	MIO_CFG_IN(GPIO0_KEY_POWER, AF0) | WAKEUP_ON_EDGE_BOTH,
-	MIO_CFG_IN(GPIO93_KEY_VOLUME_UP, AF0),
-	MIO_CFG_IN(GPIO94_KEY_VOLUME_DOWN, AF0),
-	GPIO100_KP_MKIN_0,
-	GPIO101_KP_MKIN_1,
-	GPIO102_KP_MKIN_2,
-	GPIO103_KP_MKOUT_0,
-	GPIO104_KP_MKOUT_1,
-	GPIO105_KP_MKOUT_2,
-
-	/* I2C */
-	GPIO117_I2C_SCL,
-	GPIO118_I2C_SDA,
-
-	/* Unknown */
-	MFP_CFG_IN(GPIO20, AF0),
-	MFP_CFG_IN(GPIO21, AF0),
-	MFP_CFG_IN(GPIO33, AF0),
-	MFP_CFG_OUT(GPIO49, AF0, DRIVE_HIGH),
-	MFP_CFG_OUT(GPIO57, AF0, DRIVE_HIGH),
-	MFP_CFG_IN(GPIO96, AF0),
-	MFP_CFG_OUT(GPIO116, AF0, DRIVE_HIGH),
-};
-
-/* LCD Screen and Backlight */
-static struct platform_pwm_backlight_data mioa701_backlight_data = {
-	.pwm_id		= 0,
-	.max_brightness	= 100,
-	.dft_brightness	= 50,
-	.pwm_period_ns	= 4000 * 1024,	/* Fl = 250kHz */
-};
-
-/*
- * LTM0305A776C LCD panel timings
- *
- * see:
- *  - the LTM0305A776C datasheet,
- *  - and the PXA27x Programmers' manual
- */
-static struct pxafb_mode_info mioa701_ltm0305a776c = {
-	.pixclock		= 220000,	/* CLK=4.545 MHz */
-	.xres			= 240,
-	.yres			= 320,
-	.bpp			= 16,
-	.hsync_len		= 4,
-	.vsync_len		= 2,
-	.left_margin		= 6,
-	.right_margin		= 4,
-	.upper_margin		= 5,
-	.lower_margin		= 3,
-};
-
-static void mioa701_lcd_power(int on, struct fb_var_screeninfo *si)
-{
-	gpio_set_value(GPIO87_LCD_POWER, on);
-}
-
-static struct pxafb_mach_info mioa701_pxafb_info = {
-	.modes			= &mioa701_ltm0305a776c,
-	.num_modes		= 1,
-	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
-	.pxafb_lcd_power	= mioa701_lcd_power,
-};
-
-/*
- * Keyboard configuration
- */
-static unsigned int mioa701_matrix_keys[] = {
-	KEY(0, 0, KEY_UP),
-	KEY(0, 1, KEY_RIGHT),
-	KEY(0, 2, KEY_MEDIA),
-	KEY(1, 0, KEY_DOWN),
-	KEY(1, 1, KEY_ENTER),
-	KEY(1, 2, KEY_CONNECT),	/* GPS key */
-	KEY(2, 0, KEY_LEFT),
-	KEY(2, 1, KEY_PHONE),	/* Phone Green key */
-	KEY(2, 2, KEY_CAMERA)	/* Camera key */
-};
-static struct pxa27x_keypad_platform_data mioa701_keypad_info = {
-	.matrix_key_rows = 3,
-	.matrix_key_cols = 3,
-	.matrix_key_map = mioa701_matrix_keys,
-	.matrix_key_map_size = ARRAY_SIZE(mioa701_matrix_keys),
-};
-
-/*
- * GPIO Key Configuration
- */
-#define MIO_KEY(key, _gpio, _desc, _wakeup) \
-	{ .code = (key), .gpio = (_gpio), .active_low = 0, \
-	.desc = (_desc), .type = EV_KEY, .wakeup = (_wakeup) }
-static struct gpio_keys_button mioa701_button_table[] = {
-	MIO_KEY(KEY_EXIT, GPIO0_KEY_POWER, "Power button", 1),
-	MIO_KEY(KEY_VOLUMEUP, GPIO93_KEY_VOLUME_UP, "Volume up", 0),
-	MIO_KEY(KEY_VOLUMEDOWN, GPIO94_KEY_VOLUME_DOWN, "Volume down", 0),
-	MIO_KEY(KEY_HP, GPIO12_HPJACK_INSERT, "HP jack detect", 0)
-};
-
-static struct gpio_keys_platform_data mioa701_gpio_keys_data = {
-	.buttons  = mioa701_button_table,
-	.nbuttons = ARRAY_SIZE(mioa701_button_table),
-};
-
-/*
- * Leds and vibrator
- */
-#define ONE_LED(_gpio, _name) \
-{ .gpio = (_gpio), .name = (_name), .active_low = true }
-static struct gpio_led gpio_leds[] = {
-	ONE_LED(GPIO10_LED_nCharging, "mioa701:charging"),
-	ONE_LED(GPIO97_LED_nBlue, "mioa701:blue"),
-	ONE_LED(GPIO98_LED_nOrange, "mioa701:orange"),
-	ONE_LED(GPIO82_LED_nVibra, "mioa701:vibra"),
-	ONE_LED(GPIO115_LED_nKeyboard, "mioa701:keyboard")
-};
-
-static struct gpio_led_platform_data gpio_led_info = {
-	.leds = gpio_leds,
-	.num_leds = ARRAY_SIZE(gpio_leds),
-};
-
-/*
- * GSM Sagem XS200 chip
- *
- * GSM handling was purged from kernel. For history, this is the way to go :
- *   - init : GPIO24_GSM_MOD_RESET_CMD = 0, GPIO114_GSM_nMOD_DTE_UART_STATE = 1
- *            GPIO88_GSM_nMOD_ON_CMD = 1, GPIO90_GSM_nMOD_OFF_CMD = 1
- *   - reset : GPIO24_GSM_MOD_RESET_CMD = 1, msleep(100),
- *             GPIO24_GSM_MOD_RESET_CMD = 0
- *   - turn on  : GPIO88_GSM_nMOD_ON_CMD = 0, msleep(1000),
- *                GPIO88_GSM_nMOD_ON_CMD = 1
- *   - turn off : GPIO90_GSM_nMOD_OFF_CMD = 0, msleep(1000),
- *                GPIO90_GSM_nMOD_OFF_CMD = 1
- */
-static int is_gsm_on(void)
-{
-	int is_on;
-
-	is_on = !!gpio_get_value(GPIO25_GSM_MOD_ON_STATE);
-	return is_on;
-}
-
-irqreturn_t gsm_on_irq(int irq, void *p)
-{
-	printk(KERN_DEBUG "Mioa701: GSM status changed to %s\n",
-	       is_gsm_on() ? "on" : "off");
-	return IRQ_HANDLED;
-}
-
-static struct gpio gsm_gpios[] = {
-	{ GPIO25_GSM_MOD_ON_STATE, GPIOF_IN, "GSM state" },
-	{ GPIO113_GSM_EVENT, GPIOF_IN, "GSM event" },
-};
-
-static int __init gsm_init(void)
-{
-	int rc;
-
-	rc = gpio_request_array(ARRAY_AND_SIZE(gsm_gpios));
-	if (rc)
-		goto err_gpio;
-	rc = request_irq(gpio_to_irq(GPIO25_GSM_MOD_ON_STATE), gsm_on_irq,
-			 IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
-			 "GSM XS200 Power Irq", NULL);
-	if (rc)
-		goto err_irq;
-
-	gpio_set_wake(GPIO113_GSM_EVENT, 1);
-	return 0;
-
-err_irq:
-	printk(KERN_ERR "Mioa701: Can't request GSM_ON irq\n");
-	gpio_free_array(ARRAY_AND_SIZE(gsm_gpios));
-err_gpio:
-	printk(KERN_ERR "Mioa701: gsm not available\n");
-	return rc;
-}
-
-static void gsm_exit(void)
-{
-	free_irq(gpio_to_irq(GPIO25_GSM_MOD_ON_STATE), NULL);
-	gpio_free_array(ARRAY_AND_SIZE(gsm_gpios));
-}
-
-/*
- * Bluetooth BRF6150 chip
- *
- * BT handling was purged from kernel. For history, this is the way to go :
- * - turn on  : GPIO83_BT_ON = 1
- * - turn off : GPIO83_BT_ON = 0
- */
-
-/*
- * GPS Sirf Star III chip
- *
- * GPS handling was purged from kernel. For history, this is the way to go :
- * - init : GPIO23_GPS_UNKNOWN1 = 1, GPIO26_GPS_ON = 0, GPIO27_GPS_RESET = 0
- *          GPIO106_GPS_UNKNOWN2 = 0, GPIO107_GPS_UNKNOWN3 = 0
- * - turn on  : GPIO27_GPS_RESET = 1, GPIO26_GPS_ON = 1
- * - turn off : GPIO26_GPS_ON = 0, GPIO27_GPS_RESET = 0
- */
-
-/*
- * USB UDC
- */
-static int is_usb_connected(void)
-{
-	return !gpio_get_value(GPIO13_nUSB_DETECT);
-}
-
-static struct pxa2xx_udc_mach_info mioa701_udc_info = {
-	.udc_is_connected = is_usb_connected,
-	.gpio_pullup	  = GPIO22_USB_ENABLE,
-};
-
-struct gpio_vbus_mach_info gpio_vbus_data = {
-	.gpio_vbus = GPIO13_nUSB_DETECT,
-	.gpio_vbus_inverted = 1,
-	.gpio_pullup = -1,
-};
-
-/*
- * SDIO/MMC Card controller
- */
-/**
- * The card detect interrupt isn't debounced so we delay it by 250ms
- * to give the card a chance to fully insert/eject.
- */
-static struct pxamci_platform_data mioa701_mci_info = {
-	.detect_delay_ms	= 250,
-	.ocr_mask 		= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.gpio_card_detect	= GPIO15_SDIO_INSERT,
-	.gpio_card_ro		= GPIO78_SDIO_RO,
-	.gpio_power		= GPIO91_SDIO_EN,
-};
-
-/* FlashRAM */
-static struct resource docg3_resource = {
-	.start = PXA_CS0_PHYS,
-	.end   = PXA_CS0_PHYS + SZ_8K - 1,
-	.flags = IORESOURCE_MEM,
-};
-
-static struct platform_device docg3 = {
-	.name	       = "docg3",
-	.id	       = -1,
-	.resource      = &docg3_resource,
-	.num_resources = 1,
-	.dev = {
-		.platform_data = NULL,
-	},
-};
-
-/*
- * Suspend/Resume bootstrap management
- *
- * MIO A701 reboot sequence is highly ROM dependent. From the one dissassembled,
- * this sequence is as follows :
- *   - disables interrupts
- *   - initialize SDRAM (self refresh RAM into active RAM)
- *   - initialize GPIOs (depends on value at 0xa020b020)
- *   - initialize coprossessors
- *   - if edge detect on PWR_SCL(GPIO3), then proceed to cold start
- *   - or if value at 0xa020b000 not equal to 0x0f0f0f0f, proceed to cold start
- *   - else do a resume, ie. jump to addr 0xa0100000
- */
-#define RESUME_ENABLE_ADDR	0xa020b000
-#define RESUME_ENABLE_VAL	0x0f0f0f0f
-#define RESUME_BT_ADDR		0xa020b020
-#define RESUME_UNKNOWN_ADDR	0xa020b024
-#define RESUME_VECTOR_ADDR	0xa0100000
-#define BOOTSTRAP_WORDS		mioa701_bootstrap_lg/4
-
-static u32 *save_buffer;
-
-static void install_bootstrap(void)
-{
-	int i;
-	u32 *rom_bootstrap  = phys_to_virt(RESUME_VECTOR_ADDR);
-	u32 *src = &mioa701_bootstrap;
-
-	for (i = 0; i < BOOTSTRAP_WORDS; i++)
-		rom_bootstrap[i] = src[i];
-}
-
-
-static int mioa701_sys_suspend(void)
-{
-	int i = 0, is_bt_on;
-	u32 *mem_resume_vector	= phys_to_virt(RESUME_VECTOR_ADDR);
-	u32 *mem_resume_enabler = phys_to_virt(RESUME_ENABLE_ADDR);
-	u32 *mem_resume_bt	= phys_to_virt(RESUME_BT_ADDR);
-	u32 *mem_resume_unknown	= phys_to_virt(RESUME_UNKNOWN_ADDR);
-
-	/* Devices prepare suspend */
-	is_bt_on = !!gpio_get_value(GPIO83_BT_ON);
-	pxa2xx_mfp_set_lpm(GPIO83_BT_ON,
-			   is_bt_on ? MFP_LPM_DRIVE_HIGH : MFP_LPM_DRIVE_LOW);
-
-	for (i = 0; i < BOOTSTRAP_WORDS; i++)
-		save_buffer[i] = mem_resume_vector[i];
-	save_buffer[i++] = *mem_resume_enabler;
-	save_buffer[i++] = *mem_resume_bt;
-	save_buffer[i++] = *mem_resume_unknown;
-
-	*mem_resume_enabler = RESUME_ENABLE_VAL;
-	*mem_resume_bt	    = is_bt_on;
-
-	install_bootstrap();
-	return 0;
-}
-
-static void mioa701_sys_resume(void)
-{
-	int i = 0;
-	u32 *mem_resume_vector	= phys_to_virt(RESUME_VECTOR_ADDR);
-	u32 *mem_resume_enabler = phys_to_virt(RESUME_ENABLE_ADDR);
-	u32 *mem_resume_bt	= phys_to_virt(RESUME_BT_ADDR);
-	u32 *mem_resume_unknown	= phys_to_virt(RESUME_UNKNOWN_ADDR);
-
-	for (i = 0; i < BOOTSTRAP_WORDS; i++)
-		mem_resume_vector[i] = save_buffer[i];
-	*mem_resume_enabler = save_buffer[i++];
-	*mem_resume_bt	    = save_buffer[i++];
-	*mem_resume_unknown = save_buffer[i++];
-}
-
-static struct syscore_ops mioa701_syscore_ops = {
-	.suspend	= mioa701_sys_suspend,
-	.resume		= mioa701_sys_resume,
-};
-
-static int __init bootstrap_init(void)
-{
-	int save_size = mioa701_bootstrap_lg + (sizeof(u32) * 3);
-
-	register_syscore_ops(&mioa701_syscore_ops);
-
-	save_buffer = kmalloc(save_size, GFP_KERNEL);
-	if (!save_buffer)
-		return -ENOMEM;
-	printk(KERN_INFO "MioA701: allocated %d bytes for bootstrap\n",
-	       save_size);
-	return 0;
-}
-
-static void bootstrap_exit(void)
-{
-	kfree(save_buffer);
-	unregister_syscore_ops(&mioa701_syscore_ops);
-
-	printk(KERN_CRIT "Unregistering mioa701 suspend will hang next"
-	       "resume !!!\n");
-}
-
-/*
- * Power Supply
- */
-static char *supplicants[] = {
-	"mioa701_battery"
-};
-
-static int is_ac_connected(void)
-{
-	return gpio_get_value(GPIO96_AC_DETECT);
-}
-
-static void mioa701_set_charge(int flags)
-{
-	gpio_set_value(GPIO9_CHARGE_EN, (flags == PDA_POWER_CHARGE_USB));
-}
-
-static struct pda_power_pdata power_pdata = {
-	.is_ac_online	= is_ac_connected,
-	.is_usb_online	= is_usb_connected,
-	.set_charge = mioa701_set_charge,
-	.supplied_to = supplicants,
-	.num_supplicants = ARRAY_SIZE(supplicants),
-};
-
-static struct resource power_resources[] = {
-	[0] = {
-		.name	= "ac",
-		.start	= PXA_GPIO_TO_IRQ(GPIO96_AC_DETECT),
-		.end	= PXA_GPIO_TO_IRQ(GPIO96_AC_DETECT),
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
-		IORESOURCE_IRQ_LOWEDGE,
-	},
-	[1] = {
-		.name	= "usb",
-		.start	= PXA_GPIO_TO_IRQ(GPIO13_nUSB_DETECT),
-		.end	= PXA_GPIO_TO_IRQ(GPIO13_nUSB_DETECT),
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
-		IORESOURCE_IRQ_LOWEDGE,
-	},
-};
-
-static struct platform_device power_dev = {
-	.name		= "pda-power",
-	.id		= -1,
-	.resource	= power_resources,
-	.num_resources	= ARRAY_SIZE(power_resources),
-	.dev = {
-		.platform_data	= &power_pdata,
-	},
-};
-
-static struct wm97xx_batt_pdata mioa701_battery_data = {
-	.batt_aux	= WM97XX_AUX_ID1,
-	.temp_aux	= -1,
-	.charge_gpio	= -1,
-	.min_voltage	= 0xc00,
-	.max_voltage	= 0xfc0,
-	.batt_tech	= POWER_SUPPLY_TECHNOLOGY_LION,
-	.batt_div	= 1,
-	.batt_mult	= 1,
-	.batt_name	= "mioa701_battery",
-};
-
-static struct wm97xx_pdata mioa701_wm97xx_pdata = {
-	.batt_pdata	= &mioa701_battery_data,
-};
-
-/*
- * Voltage regulation
- */
-static struct regulator_consumer_supply max1586_consumers[] = {
-	{
-		.supply = "vcc_core",
-	}
-};
-
-static struct regulator_init_data max1586_v3_info = {
-	.constraints = {
-		.name = "vcc_core range",
-		.min_uV = 1000000,
-		.max_uV = 1705000,
-		.always_on = 1,
-		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
-	},
-	.num_consumer_supplies = ARRAY_SIZE(max1586_consumers),
-	.consumer_supplies = max1586_consumers,
-};
-
-static struct max1586_subdev_data max1586_subdevs[] = {
-	{ .name = "vcc_core", .id = MAX1586_V3,
-	  .platform_data = &max1586_v3_info },
-};
-
-static struct max1586_platform_data max1586_info = {
-	.subdevs = max1586_subdevs,
-	.num_subdevs = ARRAY_SIZE(max1586_subdevs),
-	.v3_gain = MAX1586_GAIN_NO_R24, /* 700..1475 mV */
-};
-
-/*
- * Camera interface
- */
-struct pxacamera_platform_data mioa701_pxacamera_platform_data = {
-	.flags  = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 |
-		PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN,
-	.mclk_10khz = 5000,
-};
-
-static struct i2c_board_info __initdata mioa701_pi2c_devices[] = {
-	{
-		I2C_BOARD_INFO("max1586", 0x14),
-		.platform_data = &max1586_info,
-	},
-};
-
-/* Board I2C devices. */
-static struct i2c_board_info mioa701_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("mt9m111", 0x5d),
-	},
-};
-
-static struct soc_camera_link iclink = {
-	.bus_id		= 0, /* Match id in pxa27x_device_camera in device.c */
-	.board_info	= &mioa701_i2c_devices[0],
-	.i2c_adapter_id	= 0,
-};
-
-struct i2c_pxa_platform_data i2c_pdata = {
-	.fast_mode = 1,
-};
-
-static pxa2xx_audio_ops_t mioa701_ac97_info = {
-	.reset_gpio = 95,
-	.codec_pdata = { &mioa701_wm97xx_pdata, },
-};
-
-/*
- * Mio global
- */
-
-/* Devices */
-#define MIO_PARENT_DEV(var, strname, tparent, pdata)	\
-static struct platform_device var = {			\
-	.name		= strname,			\
-	.id		= -1,				\
-	.dev		= {				\
-		.platform_data = pdata,			\
-		.parent	= tparent,			\
-	},						\
-};
-#define MIO_SIMPLE_DEV(var, strname, pdata)	\
-	MIO_PARENT_DEV(var, strname, NULL, pdata)
-
-MIO_SIMPLE_DEV(mioa701_gpio_keys, "gpio-keys",	    &mioa701_gpio_keys_data)
-MIO_PARENT_DEV(mioa701_backlight, "pwm-backlight",  &pxa27x_device_pwm0.dev,
-		&mioa701_backlight_data);
-MIO_SIMPLE_DEV(mioa701_led,	  "leds-gpio",	    &gpio_led_info)
-MIO_SIMPLE_DEV(pxa2xx_pcm,	  "pxa2xx-pcm",	    NULL)
-MIO_SIMPLE_DEV(mioa701_sound,	  "mioa701-wm9713", NULL)
-MIO_SIMPLE_DEV(mioa701_board,	  "mioa701-board",  NULL)
-MIO_SIMPLE_DEV(gpio_vbus,	  "gpio-vbus",      &gpio_vbus_data);
-MIO_SIMPLE_DEV(mioa701_camera,	  "soc-camera-pdrv",&iclink);
-
-static struct platform_device *devices[] __initdata = {
-	&mioa701_gpio_keys,
-	&mioa701_backlight,
-	&mioa701_led,
-	&pxa2xx_pcm,
-	&mioa701_sound,
-	&power_dev,
-	&docg3,
-	&gpio_vbus,
-	&mioa701_camera,
-	&mioa701_board,
-};
-
-static void mioa701_machine_exit(void);
-
-static void mioa701_poweroff(void)
-{
-	mioa701_machine_exit();
-	pxa_restart('s', NULL);
-}
-
-static void mioa701_restart(char c, const char *cmd)
-{
-	mioa701_machine_exit();
-	pxa_restart('s', cmd);
-}
-
-static struct gpio global_gpios[] = {
-	{ GPIO9_CHARGE_EN, GPIOF_OUT_INIT_HIGH, "Charger enable" },
-	{ GPIO18_POWEROFF, GPIOF_OUT_INIT_LOW, "Power Off" },
-	{ GPIO87_LCD_POWER, GPIOF_OUT_INIT_LOW, "LCD Power" },
-};
-
-static void __init mioa701_machine_init(void)
-{
-	int rc;
-
-	PSLR  = 0xff100000; /* SYSDEL=125ms, PWRDEL=125ms, PSLR_SL_ROD=1 */
-	PCFR = PCFR_DC_EN | PCFR_GPR_EN | PCFR_OPDE;
-	RTTR = 32768 - 1; /* Reset crazy WinCE value */
-	UP2OCR = UP2OCR_HXOE;
-
-	/*
-	 * Set up the flash memory : DiskOnChip G3 on first static memory bank
-	 */
-	__raw_writel(0x7ff02dd8, MSC0);
-	__raw_writel(0x0001c391, MCMEM0);
-	__raw_writel(0x0001c391, MCATT0);
-	__raw_writel(0x0001c391, MCIO0);
-
-
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(mioa701_pin_config));
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-	rc = gpio_request_array(ARRAY_AND_SIZE(global_gpios));
-	if (rc)
-		pr_err("MioA701: Failed to request GPIOs: %d", rc);
-	bootstrap_init();
-	pxa_set_fb_info(NULL, &mioa701_pxafb_info);
-	pxa_set_mci_info(&mioa701_mci_info);
-	pxa_set_keypad_info(&mioa701_keypad_info);
-	pxa_set_udc_info(&mioa701_udc_info);
-	pxa_set_ac97_info(&mioa701_ac97_info);
-	pm_power_off = mioa701_poweroff;
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-	gsm_init();
-
-	i2c_register_board_info(1, ARRAY_AND_SIZE(mioa701_pi2c_devices));
-	pxa_set_i2c_info(&i2c_pdata);
-	pxa27x_set_i2c_power_info(NULL);
-	pxa_set_camera_info(&mioa701_pxacamera_platform_data);
-}
-
-static void mioa701_machine_exit(void)
-{
-	bootstrap_exit();
-	gsm_exit();
-}
-
-MACHINE_START(MIOA701, "MIO A701")
-	.atag_offset	= 0x100,
-	.restart_mode	= 's',
-	.map_io		= &pxa27x_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= &pxa27x_init_irq,
-	.handle_irq	= &pxa27x_handle_irq,
-	.init_machine	= mioa701_machine_init,
-	.timer		= &pxa_timer,
-	.restart	= mioa701_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/mioa701_bootresume.S b/ANDROID_3.4.5/arch/arm/mach-pxa/mioa701_bootresume.S
deleted file mode 100644
index 324d25a4..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/mioa701_bootresume.S
+++ /dev/null
@@ -1,37 +0,0 @@
-/* Bootloader to resume MIO A701
- *
- * 2007-1-12 Robert Jarzmik
- *
- * This code is licenced under the GPLv2.
-*/
-
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-
-/*
- * Note: Yes, part of the following code is located into the .data section.
- *       This is to allow jumpaddr to be accessed with a relative load
- *       while we can't rely on any MMU translation.  We could have put
- *       sleep_save_sp in the .text section as well, but some setups might
- *       insist on it to be truly read-only.
- */
-	.data
-ENTRY(mioa701_bootstrap)
-0:
-	b	1f
-ENTRY(mioa701_jumpaddr)
-	.word	0x40f00008		@ PSPR in no-MMU mode
-1:
-	mov	r0,     #0xa0000000	@ Don't suppose memory access works
-	orr	r0, r0, #0x00200000	@ even if it's supposed to
-	orr	r0, r0, #0x0000b000
-	mov	r1, #0
-	str	r1, [r0]		@ Early disable resume for next boot
-	ldr	r0, mioa701_jumpaddr	@ (Murphy's Law)
-	ldr	r0, [r0]
-	mov	pc, r0
-2:
-
-ENTRY(mioa701_bootstrap_lg)
-	.data
-	.word	2b-0b
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/mp900.c b/ANDROID_3.4.5/arch/arm/mach-pxa/mp900.c
deleted file mode 100644
index 152efbf0..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/mp900.c
+++ /dev/null
@@ -1,104 +0,0 @@
-/*
- *  linux/arch/arm/mach-pxa/mp900.c
- *
- *  Support for the NEC MobilePro900/C platform
- *
- *  Based on mach-pxa/gumstix.c
- *
- *  2007, 2008 Kristoffer Ericson <kristoffer.ericson@gmail.com>
- *  2007, 2008 Michael Petchkovsky <mkpetch@internode.on.net>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/types.h>
-#include <linux/usb/isp116x.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include <mach/pxa25x.h>
-#include "generic.h"
-
-static void isp116x_pfm_delay(struct device *dev, int delay)
-{
-
-	/* 400Mhz PXA2 = 2.5ns / instruction */
-
-	int cyc = delay / 10;
-
-	/* 4 Instructions = 4 x 2.5ns = 10ns */
-	__asm__ volatile ("0:\n"
-		"subs %0, %1, #1\n"
-		"bge 0b\n"
-		:"=r" (cyc)
-		:"0"(cyc)
-	);
-}
-
-static struct isp116x_platform_data isp116x_pfm_data = {
-	.remote_wakeup_enable = 1,
-	.delay = isp116x_pfm_delay,
-};
-
-static struct resource isp116x_pfm_resources[] = {
-	[0] =	{
-		.start	= 0x0d000000,
-		.end	= 0x0d000000 + 1,
-		.flags	= IORESOURCE_MEM,
-		},
-	[1] =	{
-		.start  = 0x0d000000 + 4,
-		.end	= 0x0d000000 + 5,
-		.flags  = IORESOURCE_MEM,
-		},
-	[2] =	{
-		.start	= 61,
-		.end	= 61,
-		.flags	= IORESOURCE_IRQ,
-		},
-};
-
-static struct platform_device mp900c_dummy_device = {
-	.name		= "mp900c_dummy",
-	.id		= -1,
-};
-
-static struct platform_device mp900c_usb = {
-	.name		= "isp116x-hcd",
-	.num_resources	= ARRAY_SIZE(isp116x_pfm_resources),
-	.resource	= isp116x_pfm_resources,
-	.dev.platform_data = &isp116x_pfm_data,
-};
-
-static struct platform_device *devices[] __initdata = {
-	&mp900c_dummy_device,
-	&mp900c_usb,
-};
-
-static void __init mp900c_init(void)
-{
-	printk(KERN_INFO "MobilePro 900/C machine init\n");
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-}
-
-/* Maintainer - Michael Petchkovsky <mkpetch@internode.on.net> */
-MACHINE_START(NEC_MP900, "MobilePro900/C")
-	.atag_offset	= 0x220100,
-	.timer		= &pxa_timer,
-	.map_io		= pxa25x_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa25x_init_irq,
-	.handle_irq	= pxa25x_handle_irq,
-	.init_machine	= mp900c_init,
-	.restart	= pxa_restart,
-MACHINE_END
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/mxm8x10.c b/ANDROID_3.4.5/arch/arm/mach-pxa/mxm8x10.c
deleted file mode 100644
index 83570a79..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/mxm8x10.c
+++ /dev/null
@@ -1,475 +0,0 @@
-/*
- * linux/arch/arm/mach-pxa/mxm8x10.c
- *
- * Support for the Embedian MXM-8x10 Computer on Module
- *
- * Copyright (C) 2006 Marvell International Ltd.
- * Copyright (C) 2009 Embedian Inc.
- * Copyright (C) 2009 TMT Services & Supplies (Pty) Ltd.
- *
- * 2007-09-04: eric miao <eric.y.miao@gmail.com>
- *             rewrite to align with latest kernel
- *
- * 2010-01-09: Edwin Peer <epeer@tmtservices.co.za>
- * 	       Hennie van der Merwe <hvdmerwe@tmtservices.co.za>
- *             rework for upstream merge
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/serial_8250.h>
-#include <linux/dm9000.h>
-#include <linux/gpio.h>
-#include <linux/i2c/pxa-i2c.h>
-
-#include <plat/pxa3xx_nand.h>
-
-#include <mach/pxafb.h>
-#include <mach/mmc.h>
-#include <mach/ohci.h>
-#include <mach/pxa320.h>
-
-#include <mach/mxm8x10.h>
-
-#include "devices.h"
-#include "generic.h"
-
-/* GPIO pin definition
-
-External device stuff   - Leave unconfigured for now...
----------------------
-GPIO0   -   DREQ    (External DMA Request)
-GPIO3   -   nGCS2   (External Chip Select) Where is nGCS0; nGCS1; nGCS4; nGCS5 ?
-GPIO4   -   nGCS3
-GPIO15  -   EXT_GPIO1
-GPIO16  -   EXT_GPIO2
-GPIO17  -   EXT_GPIO3
-GPIO24  -   EXT_GPIO4
-GPIO25  -   EXT_GPIO5
-GPIO26  -   EXT_GPIO6
-GPIO27  -   EXT_GPIO7
-GPIO28  -   EXT_GPIO8
-GPIO29  -   EXT_GPIO9
-GPIO30  -   EXT_GPIO10
-GPIO31  -   EXT_GPIO11
-GPIO57  -   EXT_GPIO12
-GPIO74  -   EXT_IRQ1
-GPIO75  -   EXT_IRQ2
-GPIO76  -   EXT_IRQ3
-GPIO77  -   EXT_IRQ4
-GPIO78  -   EXT_IRQ5
-GPIO79  -   EXT_IRQ6
-GPIO80  -   EXT_IRQ7
-GPIO81  -   EXT_IRQ8
-GPIO87  -   VCCIO_PWREN (External Device PWREN)
-
-Dallas 1-Wire   - Leave unconfigured for now...
--------------
-GPIO0_2 -   DS - 1Wire
-
-Ethernet
---------
-GPIO1   -   DM9000 PWR
-GPIO9   -   DM9K_nIRQ
-GPIO36  -   DM9K_RESET
-
-Keypad  - Leave unconfigured by for now...
-------
-GPIO1_2 -   KP_DKIN0
-GPIO5_2 -   KP_MKOUT7
-GPIO82  -   KP_DKIN1
-GPIO85  -   KP_DKIN2
-GPIO86  -   KP_DKIN3
-GPIO113 -   KP_MKIN0
-GPIO114 -   KP_MKIN1
-GPIO115 -   KP_MKIN2
-GPIO116 -   KP_MKIN3
-GPIO117 -   KP_MKIN4
-GPIO118 -   KP_MKIN5
-GPIO119 -   KP_MKIN6
-GPIO120 -   KP_MKIN7
-GPIO121 -   KP_MKOUT0
-GPIO122 -   KP_MKOUT1
-GPIO122 -   KP_MKOUT2
-GPIO123 -   KP_MKOUT3
-GPIO124 -   KP_MKOUT4
-GPIO125 -   KP_MKOUT5
-GPIO127 -   KP_MKOUT6
-
-Data Bus    - Leave unconfigured for now...
---------
-GPIO2   -   nWait (Data Bus)
-
-USB Device
-----------
-GPIO4_2 -   USBD_PULLUP
-GPIO10  -   UTM_CLK (USB Device UTM Clk)
-GPIO49  -   USB 2.0 Device UTM_DATA0
-GPIO50  -   USB 2.0 Device UTM_DATA1
-GPIO51  -   USB 2.0 Device UTM_DATA2
-GPIO52  -   USB 2.0 Device UTM_DATA3
-GPIO53  -   USB 2.0 Device UTM_DATA4
-GPIO54  -   USB 2.0 Device UTM_DATA5
-GPIO55  -   USB 2.0 Device UTM_DATA6
-GPIO56  -   USB 2.0 Device UTM_DATA7
-GPIO58  -   UTM_RXVALID (USB 2.0 Device)
-GPIO59  -   UTM_RXACTIVE (USB 2.0 Device)
-GPIO60  -   UTM_RXERROR
-GPIO61  -   UTM_OPMODE0
-GPIO62  -   UTM_OPMODE1
-GPIO71  -   USBD_INT    (USB Device?)
-GPIO73  -   UTM_TXREADY (USB 2.0 Device)
-GPIO83  -   UTM_TXVALID (USB 2.0 Device)
-GPIO98  -   UTM_RESET   (USB 2.0 device)
-GPIO99  -   UTM_XCVR_SELECT
-GPIO100 -   UTM_TERM_SELECT
-GPIO101 -   UTM_SUSPENDM_X
-GPIO102 -   UTM_LINESTATE0
-GPIO103 -   UTM_LINESTATE1
-
-Card-Bus Interface  - Leave unconfigured for now...
-------------------
-GPIO5   -   nPIOR (I/O space output enable)
-GPIO6   -   nPIOW (I/O space write enable)
-GPIO7   -   nIOS16 (Input from I/O space telling size of data bus)
-GPIO8   -   nPWAIT (Input for inserting wait states)
-
-LCD
----
-GPIO6_2     -   LDD0
-GPIO7_2     -   LDD1
-GPIO8_2     -   LDD2
-GPIO9_2     -   LDD3
-GPIO11_2    -   LDD5
-GPIO12_2    -   LDD6
-GPIO13_2    -   LDD7
-GPIO14_2    -   VSYNC
-GPIO15_2    -   HSYNC
-GPIO16_2    -   VCLK
-GPIO17_2    -   HCLK
-GPIO18_2    -   VDEN
-GPIO63      -   LDD8    (CPU LCD)
-GPIO64      -   LDD9    (CPU LCD)
-GPIO65      -   LDD10   (CPU LCD)
-GPIO66      -   LDD11   (CPU LCD)
-GPIO67      -   LDD12   (CPU LCD)
-GPIO68      -   LDD13   (CPU LCD)
-GPIO69      -   LDD14   (CPU LCD)
-GPIO70      -   LDD15   (CPU LCD)
-GPIO88      -   VCCLCD_PWREN (LCD Panel PWREN)
-GPIO97      -   BACKLIGHT_EN
-GPIO104     -   LCD_PWREN
-
-PWM   - Leave unconfigured for now...
----
-GPIO11  -   PWM0
-GPIO12  -   PWM1
-GPIO13  -   PWM2
-GPIO14  -   PWM3
-
-SD-CARD
--------
-GPIO18  -   SDDATA0
-GPIO19  -   SDDATA1
-GPIO20  -   SDDATA2
-GPIO21  -   SDDATA3
-GPIO22  -   SDCLK
-GPIO23  -   SDCMD
-GPIO72  -   SD_WP
-GPIO84  -   SD_nIRQ_CD  (SD-Card)
-
-I2C
----
-GPIO32  -   I2CSCL
-GPIO33  -   I2CSDA
-
-AC97
-----
-GPIO35  -   AC97_SDATA_IN
-GPIO37  -   AC97_SDATA_OUT
-GPIO38  -   AC97_SYNC
-GPIO39  -   AC97_BITCLK
-GPIO40  -   AC97_nRESET
-
-UART1
------
-GPIO41  -   UART_RXD1
-GPIO42  -   UART_TXD1
-GPIO43  -   UART_CTS1
-GPIO44  -   UART_DCD1
-GPIO45  -   UART_DSR1
-GPIO46  -   UART_nRI1
-GPIO47  -   UART_DTR1
-GPIO48  -   UART_RTS1
-
-UART2
------
-GPIO109 -   RTS2
-GPIO110 -   RXD2
-GPIO111 -   TXD2
-GPIO112 -   nCTS2
-
-UART3
------
-GPIO105 -   nCTS3
-GPIO106 -   nRTS3
-GPIO107 -   TXD3
-GPIO108 -   RXD3
-
-SSP3    - Leave unconfigured for now...
-----
-GPIO89  -   SSP3_CLK
-GPIO90  -   SSP3_SFRM
-GPIO91  -   SSP3_TXD
-GPIO92  -   SSP3_RXD
-
-SSP4
-GPIO93  -   SSP4_CLK
-GPIO94  -   SSP4_SFRM
-GPIO95  -   SSP4_TXD
-GPIO96  -   SSP4_RXD
-*/
-
-static mfp_cfg_t mfp_cfg[] __initdata = {
-	/* USB */
-	GPIO10_UTM_CLK,
-	GPIO49_U2D_PHYDATA_0,
-	GPIO50_U2D_PHYDATA_1,
-	GPIO51_U2D_PHYDATA_2,
-	GPIO52_U2D_PHYDATA_3,
-	GPIO53_U2D_PHYDATA_4,
-	GPIO54_U2D_PHYDATA_5,
-	GPIO55_U2D_PHYDATA_6,
-	GPIO56_U2D_PHYDATA_7,
-	GPIO58_UTM_RXVALID,
-	GPIO59_UTM_RXACTIVE,
-	GPIO60_U2D_RXERROR,
-	GPIO61_U2D_OPMODE0,
-	GPIO62_U2D_OPMODE1,
-	GPIO71_GPIO, /* USBD_INT */
-	GPIO73_UTM_TXREADY,
-	GPIO83_U2D_TXVALID,
-	GPIO98_U2D_RESET,
-	GPIO99_U2D_XCVR_SEL,
-	GPIO100_U2D_TERM_SEL,
-	GPIO101_U2D_SUSPEND,
-	GPIO102_UTM_LINESTATE_0,
-	GPIO103_UTM_LINESTATE_1,
-	GPIO4_2_GPIO | MFP_PULL_HIGH, /* UTM_PULLUP */
-
-	/* DM9000 */
-	GPIO1_GPIO,
-	GPIO9_GPIO,
-	GPIO36_GPIO,
-
-	/* AC97 */
-	GPIO35_AC97_SDATA_IN_0,
-	GPIO37_AC97_SDATA_OUT,
-	GPIO38_AC97_SYNC,
-	GPIO39_AC97_BITCLK,
-	GPIO40_AC97_nACRESET,
-
-	/* UARTS */
-	GPIO41_UART1_RXD,
-	GPIO42_UART1_TXD,
-	GPIO43_UART1_CTS,
-	GPIO44_UART1_DCD,
-	GPIO45_UART1_DSR,
-	GPIO46_UART1_RI,
-	GPIO47_UART1_DTR,
-	GPIO48_UART1_RTS,
-
-	GPIO109_UART2_RTS,
-	GPIO110_UART2_RXD,
-	GPIO111_UART2_TXD,
-	GPIO112_UART2_CTS,
-
-	GPIO105_UART3_CTS,
-	GPIO106_UART3_RTS,
-	GPIO107_UART3_TXD,
-	GPIO108_UART3_RXD,
-
-	GPIO78_GPIO,
-	GPIO79_GPIO,
-	GPIO80_GPIO,
-	GPIO81_GPIO,
-
-	/* I2C */
-	GPIO32_I2C_SCL,
-	GPIO33_I2C_SDA,
-
-	/* MMC */
-	GPIO18_MMC1_DAT0,
-	GPIO19_MMC1_DAT1,
-	GPIO20_MMC1_DAT2,
-	GPIO21_MMC1_DAT3,
-	GPIO22_MMC1_CLK,
-	GPIO23_MMC1_CMD,
-	GPIO72_GPIO | MFP_PULL_HIGH, /* Card Detect */
-	GPIO84_GPIO | MFP_PULL_LOW, /* Write Protect */
-
-	/* IRQ */
-	GPIO74_GPIO | MFP_LPM_EDGE_RISE, /* EXT_IRQ1 */
-	GPIO75_GPIO | MFP_LPM_EDGE_RISE, /* EXT_IRQ2 */
-	GPIO76_GPIO | MFP_LPM_EDGE_RISE, /* EXT_IRQ3 */
-	GPIO77_GPIO | MFP_LPM_EDGE_RISE, /* EXT_IRQ4 */
-	GPIO78_GPIO | MFP_LPM_EDGE_RISE, /* EXT_IRQ5 */
-	GPIO79_GPIO | MFP_LPM_EDGE_RISE, /* EXT_IRQ6 */
-	GPIO80_GPIO | MFP_LPM_EDGE_RISE, /* EXT_IRQ7 */
-	GPIO81_GPIO | MFP_LPM_EDGE_RISE  /* EXT_IRQ8 */
-};
-
-/* MMC/MCI Support */
-#if defined(CONFIG_MMC)
-static struct pxamci_platform_data mxm_8x10_mci_platform_data = {
-	.ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
-	.detect_delay_ms = 10,
-	.gpio_card_detect = MXM_8X10_SD_nCD,
-	.gpio_card_ro = MXM_8X10_SD_WP,
-	.gpio_power = -1
-};
-
-void __init mxm_8x10_mmc_init(void)
-{
-	pxa_set_mci_info(&mxm_8x10_mci_platform_data);
-}
-#endif
-
-/* USB Open Host Controller Interface */
-static struct pxaohci_platform_data mxm_8x10_ohci_platform_data = {
-	.port_mode = PMM_NPS_MODE,
-	.flags = ENABLE_PORT_ALL
-};
-
-void __init mxm_8x10_usb_host_init(void)
-{
-	pxa_set_ohci_info(&mxm_8x10_ohci_platform_data);
-}
-
-/* AC97 Sound Support */
-static struct platform_device mxm_8x10_ac97_device = {
-	.name = "pxa2xx-ac97"
-};
-
-void __init mxm_8x10_ac97_init(void)
-{
-	platform_device_register(&mxm_8x10_ac97_device);
-}
-
-/* NAND flash Support */
-#if defined(CONFIG_MTD_NAND_PXA3xx) || defined(CONFIG_MTD_NAND_PXA3xx_MODULE)
-#define NAND_BLOCK_SIZE SZ_128K
-#define NB(x)           (NAND_BLOCK_SIZE * (x))
-static struct mtd_partition mxm_8x10_nand_partitions[] = {
-	[0] = {
-	       .name = "boot",
-	       .size = NB(0x002),
-	       .offset = NB(0x000),
-	       .mask_flags = MTD_WRITEABLE
-	},
-	[1] = {
-	       .name = "kernel",
-	       .size = NB(0x010),
-	       .offset = NB(0x002),
-	       .mask_flags = MTD_WRITEABLE
-	},
-	[2] = {
-	       .name = "root",
-	       .size = NB(0x36c),
-	       .offset = NB(0x012)
-	},
-	[3] = {
-	       .name = "bbt",
-	       .size = NB(0x082),
-	       .offset = NB(0x37e),
-	       .mask_flags = MTD_WRITEABLE
-	}
-};
-
-static struct pxa3xx_nand_platform_data mxm_8x10_nand_info = {
-	.enable_arbiter	= 1,
-	.keep_config	= 1,
-	.num_cs		= 1,
-	.parts[0]	= mxm_8x10_nand_partitions,
-	.nr_parts[0]	= ARRAY_SIZE(mxm_8x10_nand_partitions)
-};
-
-static void __init mxm_8x10_nand_init(void)
-{
-	pxa3xx_set_nand_info(&mxm_8x10_nand_info);
-}
-#else
-static inline void mxm_8x10_nand_init(void) {}
-#endif /* CONFIG_MTD_NAND_PXA3xx || CONFIG_MTD_NAND_PXA3xx_MODULE */
-
-/* Ethernet support: Davicom DM9000 */
-static struct resource dm9k_resources[] = {
-	[0] = {
-	       .start = MXM_8X10_ETH_PHYS + 0x300,
-	       .end = MXM_8X10_ETH_PHYS + 0x300,
-	       .flags = IORESOURCE_MEM
-	},
-	[1] = {
-	       .start = MXM_8X10_ETH_PHYS + 0x308,
-	       .end = MXM_8X10_ETH_PHYS + 0x308,
-	       .flags = IORESOURCE_MEM
-	},
-	[2] = {
-	       .start = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO9)),
-	       .end = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO9)),
-	       .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE
-	}
-};
-
-static struct dm9000_plat_data dm9k_plat_data = {
-	.flags = DM9000_PLATF_16BITONLY
-};
-
-static struct platform_device dm9k_device = {
-	.name = "dm9000",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(dm9k_resources),
-	.resource = dm9k_resources,
-	.dev = {
-		.platform_data = &dm9k_plat_data
-	}
-};
-
-static void __init mxm_8x10_ethernet_init(void)
-{
-	platform_device_register(&dm9k_device);
-}
-
-/* PXA UARTs */
-static void __init mxm_8x10_uarts_init(void)
-{
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-}
-
-/* I2C and Real Time Clock */
-static struct i2c_board_info __initdata mxm_8x10_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("ds1337", 0x68)
-	}
-};
-
-static void __init mxm_8x10_i2c_init(void)
-{
-	i2c_register_board_info(0, mxm_8x10_i2c_devices,
-				ARRAY_SIZE(mxm_8x10_i2c_devices));
-	pxa_set_i2c_info(NULL);
-}
-
-void __init mxm_8x10_barebones_init(void)
-{
-	pxa3xx_mfp_config(ARRAY_AND_SIZE(mfp_cfg));
-
-	mxm_8x10_uarts_init();
-	mxm_8x10_nand_init();
-	mxm_8x10_i2c_init();
-	mxm_8x10_ethernet_init();
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/palm27x.c b/ANDROID_3.4.5/arch/arm/mach-pxa/palm27x.c
deleted file mode 100644
index fbc10d7b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/palm27x.c
+++ /dev/null
@@ -1,479 +0,0 @@
-/*
- * Common code for Palm LD, T5, TX, Z72
- *
- * Copyright (C) 2010-2011 Marek Vasut <marek.vasut@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/irq.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/pda_power.h>
-#include <linux/pwm_backlight.h>
-#include <linux/gpio.h>
-#include <linux/wm97xx.h>
-#include <linux/power_supply.h>
-#include <linux/usb/gpio_vbus.h>
-#include <linux/regulator/max1586.h>
-#include <linux/i2c/pxa-i2c.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <mach/pxa27x.h>
-#include <mach/audio.h>
-#include <mach/mmc.h>
-#include <mach/pxafb.h>
-#include <mach/irda.h>
-#include <mach/udc.h>
-#include <mach/palmasoc.h>
-#include <mach/palm27x.h>
-
-#include "generic.h"
-#include "devices.h"
-
-/******************************************************************************
- * SD/MMC card controller
- ******************************************************************************/
-#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
-static struct pxamci_platform_data palm27x_mci_platform_data = {
-	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.detect_delay_ms	= 200,
-};
-
-void __init palm27x_mmc_init(int detect, int ro, int power,
-					int power_inverted)
-{
-	palm27x_mci_platform_data.gpio_card_detect	= detect;
-	palm27x_mci_platform_data.gpio_card_ro		= ro;
-	palm27x_mci_platform_data.gpio_power		= power;
-	palm27x_mci_platform_data.gpio_power_invert	= power_inverted;
-
-	pxa_set_mci_info(&palm27x_mci_platform_data);
-}
-#endif
-
-/******************************************************************************
- * Power management - standby
- ******************************************************************************/
-#if defined(CONFIG_SUSPEND)
-void __init palm27x_pm_init(unsigned long str_base)
-{
-	static const unsigned long resume[] = {
-		0xe3a00101,	/* mov	r0,	#0x40000000 */
-		0xe380060f,	/* orr	r0, r0, #0x00f00000 */
-		0xe590f008,	/* ldr	pc, [r0, #0x08] */
-	};
-
-	/*
-	 * Copy the bootloader.
-	 * NOTE: PalmZ72 uses a different wakeup method!
-	 */
-	memcpy(phys_to_virt(str_base), resume, sizeof(resume));
-}
-#endif
-
-/******************************************************************************
- * Framebuffer
- ******************************************************************************/
-#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
-struct pxafb_mode_info palm_320x480_lcd_mode = {
-	.pixclock	= 57692,
-	.xres		= 320,
-	.yres		= 480,
-	.bpp		= 16,
-
-	.left_margin	= 32,
-	.right_margin	= 1,
-	.upper_margin	= 7,
-	.lower_margin	= 1,
-
-	.hsync_len	= 4,
-	.vsync_len	= 1,
-};
-
-struct pxafb_mode_info palm_320x320_lcd_mode = {
-	.pixclock	= 115384,
-	.xres		= 320,
-	.yres		= 320,
-	.bpp		= 16,
-
-	.left_margin	= 27,
-	.right_margin	= 7,
-	.upper_margin	= 7,
-	.lower_margin	= 8,
-
-	.hsync_len	= 6,
-	.vsync_len	= 1,
-};
-
-struct pxafb_mode_info palm_320x320_new_lcd_mode = {
-	.pixclock	= 86538,
-	.xres		= 320,
-	.yres		= 320,
-	.bpp		= 16,
-
-	.left_margin	= 20,
-	.right_margin	= 8,
-	.upper_margin	= 8,
-	.lower_margin	= 5,
-
-	.hsync_len	= 4,
-	.vsync_len	= 1,
-};
-
-static struct pxafb_mach_info palm27x_lcd_screen = {
-	.num_modes	= 1,
-	.lcd_conn	= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
-};
-
-static int palm27x_lcd_power;
-static void palm27x_lcd_ctl(int on, struct fb_var_screeninfo *info)
-{
-	gpio_set_value(palm27x_lcd_power, on);
-}
-
-void __init palm27x_lcd_init(int power, struct pxafb_mode_info *mode)
-{
-	palm27x_lcd_screen.modes = mode;
-
-	if (gpio_is_valid(power)) {
-		if (!gpio_request(power, "LCD power")) {
-			pr_err("Palm27x: failed to claim lcd power gpio!\n");
-			return;
-		}
-		if (!gpio_direction_output(power, 1)) {
-			pr_err("Palm27x: lcd power configuration failed!\n");
-			return;
-		}
-		palm27x_lcd_power = power;
-		palm27x_lcd_screen.pxafb_lcd_power = palm27x_lcd_ctl;
-	}
-
-	pxa_set_fb_info(NULL, &palm27x_lcd_screen);
-}
-#endif
-
-/******************************************************************************
- * USB Gadget
- ******************************************************************************/
-#if	defined(CONFIG_USB_PXA27X) || \
-	defined(CONFIG_USB_PXA27X_MODULE)
-static struct gpio_vbus_mach_info palm27x_udc_info = {
-	.gpio_vbus_inverted	= 1,
-};
-
-static struct platform_device palm27x_gpio_vbus = {
-	.name	= "gpio-vbus",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &palm27x_udc_info,
-	},
-};
-
-void __init palm27x_udc_init(int vbus, int pullup, int vbus_inverted)
-{
-	palm27x_udc_info.gpio_vbus	= vbus;
-	palm27x_udc_info.gpio_pullup	= pullup;
-
-	palm27x_udc_info.gpio_vbus_inverted = vbus_inverted;
-
-	if (!gpio_request(pullup, "USB Pullup")) {
-		gpio_direction_output(pullup,
-			palm27x_udc_info.gpio_vbus_inverted);
-		gpio_free(pullup);
-	} else
-		return;
-
-	platform_device_register(&palm27x_gpio_vbus);
-}
-#endif
-
-/******************************************************************************
- * IrDA
- ******************************************************************************/
-#if defined(CONFIG_IRDA) || defined(CONFIG_IRDA_MODULE)
-static struct pxaficp_platform_data palm27x_ficp_platform_data = {
-	.transceiver_cap	= IR_SIRMODE | IR_OFF,
-};
-
-void __init palm27x_irda_init(int pwdn)
-{
-	palm27x_ficp_platform_data.gpio_pwdown = pwdn;
-	pxa_set_ficp_info(&palm27x_ficp_platform_data);
-}
-#endif
-
-/******************************************************************************
- * WM97xx audio, battery
- ******************************************************************************/
-#if	defined(CONFIG_TOUCHSCREEN_WM97XX) || \
-	defined(CONFIG_TOUCHSCREEN_WM97XX_MODULE)
-static struct wm97xx_batt_pdata palm27x_batt_pdata = {
-	.batt_aux	= WM97XX_AUX_ID3,
-	.temp_aux	= WM97XX_AUX_ID2,
-	.charge_gpio	= -1,
-	.batt_mult	= 1000,
-	.batt_div	= 414,
-	.temp_mult	= 1,
-	.temp_div	= 1,
-	.batt_tech	= POWER_SUPPLY_TECHNOLOGY_LIPO,
-	.batt_name	= "main-batt",
-};
-
-static struct wm97xx_pdata palm27x_wm97xx_pdata = {
-	.batt_pdata	= &palm27x_batt_pdata,
-};
-
-static pxa2xx_audio_ops_t palm27x_ac97_pdata = {
-	.codec_pdata	= { &palm27x_wm97xx_pdata, },
-};
-
-static struct palm27x_asoc_info palm27x_asoc_pdata = {
-	.jack_gpio	= -1,
-};
-
-static struct platform_device palm27x_asoc = {
-	.name = "palm27x-asoc",
-	.id   = -1,
-	.dev  = {
-		.platform_data = &palm27x_asoc_pdata,
-	},
-};
-
-void __init palm27x_ac97_init(int minv, int maxv, int jack, int reset)
-{
-	palm27x_ac97_pdata.reset_gpio	= reset;
-	palm27x_asoc_pdata.jack_gpio	= jack;
-
-	if (minv < 0 || maxv < 0) {
-		palm27x_ac97_pdata.codec_pdata[0] = NULL;
-		pxa_set_ac97_info(&palm27x_ac97_pdata);
-	} else {
-		palm27x_batt_pdata.min_voltage	= minv,
-		palm27x_batt_pdata.max_voltage	= maxv,
-
-		pxa_set_ac97_info(&palm27x_ac97_pdata);
-		platform_device_register(&palm27x_asoc);
-	}
-}
-#endif
-
-/******************************************************************************
- * Backlight
- ******************************************************************************/
-#if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE)
-static int palm_bl_power;
-static int palm_lcd_power;
-
-static int palm27x_backlight_init(struct device *dev)
-{
-	int ret;
-
-	ret = gpio_request(palm_bl_power, "BL POWER");
-	if (ret)
-		goto err;
-	ret = gpio_direction_output(palm_bl_power, 0);
-	if (ret)
-		goto err2;
-
-	if (gpio_is_valid(palm_lcd_power)) {
-		ret = gpio_request(palm_lcd_power, "LCD POWER");
-		if (ret)
-			goto err2;
-		ret = gpio_direction_output(palm_lcd_power, 0);
-		if (ret)
-			goto err3;
-	}
-
-	return 0;
-err3:
-	gpio_free(palm_lcd_power);
-err2:
-	gpio_free(palm_bl_power);
-err:
-	return ret;
-}
-
-static int palm27x_backlight_notify(struct device *dev, int brightness)
-{
-	gpio_set_value(palm_bl_power, brightness);
-	if (gpio_is_valid(palm_lcd_power))
-		gpio_set_value(palm_lcd_power, brightness);
-	return brightness;
-}
-
-static void palm27x_backlight_exit(struct device *dev)
-{
-	gpio_free(palm_bl_power);
-	if (gpio_is_valid(palm_lcd_power))
-		gpio_free(palm_lcd_power);
-}
-
-static struct platform_pwm_backlight_data palm27x_backlight_data = {
-	.pwm_id		= 0,
-	.max_brightness	= 0xfe,
-	.dft_brightness	= 0x7e,
-	.pwm_period_ns	= 3500 * 1024,
-	.init		= palm27x_backlight_init,
-	.notify		= palm27x_backlight_notify,
-	.exit		= palm27x_backlight_exit,
-};
-
-static struct platform_device palm27x_backlight = {
-	.name	= "pwm-backlight",
-	.dev	= {
-		.parent		= &pxa27x_device_pwm0.dev,
-		.platform_data	= &palm27x_backlight_data,
-	},
-};
-
-void __init palm27x_pwm_init(int bl, int lcd)
-{
-	palm_bl_power	= bl;
-	palm_lcd_power	= lcd;
-	platform_device_register(&palm27x_backlight);
-}
-#endif
-
-/******************************************************************************
- * Power supply
- ******************************************************************************/
-#if defined(CONFIG_PDA_POWER) || defined(CONFIG_PDA_POWER_MODULE)
-static int palm_ac_state;
-static int palm_usb_state;
-
-static int palm27x_power_supply_init(struct device *dev)
-{
-	int ret;
-
-	ret = gpio_request(palm_ac_state, "AC state");
-	if (ret)
-		goto err1;
-	ret = gpio_direction_input(palm_ac_state);
-	if (ret)
-		goto err2;
-
-	if (gpio_is_valid(palm_usb_state)) {
-		ret = gpio_request(palm_usb_state, "USB state");
-		if (ret)
-			goto err2;
-		ret = gpio_direction_input(palm_usb_state);
-		if (ret)
-			goto err3;
-	}
-
-	return 0;
-err3:
-	gpio_free(palm_usb_state);
-err2:
-	gpio_free(palm_ac_state);
-err1:
-	return ret;
-}
-
-static void palm27x_power_supply_exit(struct device *dev)
-{
-	gpio_free(palm_usb_state);
-	gpio_free(palm_ac_state);
-}
-
-static int palm27x_is_ac_online(void)
-{
-	return gpio_get_value(palm_ac_state);
-}
-
-static int palm27x_is_usb_online(void)
-{
-	return !gpio_get_value(palm_usb_state);
-}
-static char *palm27x_supplicants[] = {
-	"main-battery",
-};
-
-static struct pda_power_pdata palm27x_ps_info = {
-	.init			= palm27x_power_supply_init,
-	.exit			= palm27x_power_supply_exit,
-	.is_ac_online		= palm27x_is_ac_online,
-	.is_usb_online		= palm27x_is_usb_online,
-	.supplied_to		= palm27x_supplicants,
-	.num_supplicants	= ARRAY_SIZE(palm27x_supplicants),
-};
-
-static struct platform_device palm27x_power_supply = {
-	.name = "pda-power",
-	.id   = -1,
-	.dev  = {
-		.platform_data = &palm27x_ps_info,
-	},
-};
-
-void __init palm27x_power_init(int ac, int usb)
-{
-	palm_ac_state	= ac;
-	palm_usb_state	= usb;
-	platform_device_register(&palm27x_power_supply);
-}
-#endif
-
-/******************************************************************************
- * Core power regulator
- ******************************************************************************/
-#if defined(CONFIG_REGULATOR_MAX1586) || \
-    defined(CONFIG_REGULATOR_MAX1586_MODULE)
-static struct regulator_consumer_supply palm27x_max1587a_consumers[] = {
-	{
-		.supply	= "vcc_core",
-	}
-};
-
-static struct regulator_init_data palm27x_max1587a_v3_info = {
-	.constraints = {
-		.name		= "vcc_core range",
-		.min_uV		= 900000,
-		.max_uV		= 1705000,
-		.always_on	= 1,
-		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE,
-	},
-	.consumer_supplies	= palm27x_max1587a_consumers,
-	.num_consumer_supplies	= ARRAY_SIZE(palm27x_max1587a_consumers),
-};
-
-static struct max1586_subdev_data palm27x_max1587a_subdevs[] = {
-	{
-		.name		= "vcc_core",
-		.id		= MAX1586_V3,
-		.platform_data	= &palm27x_max1587a_v3_info,
-	}
-};
-
-static struct max1586_platform_data palm27x_max1587a_info = {
-	.subdevs     = palm27x_max1587a_subdevs,
-	.num_subdevs = ARRAY_SIZE(palm27x_max1587a_subdevs),
-	.v3_gain     = MAX1586_GAIN_R24_3k32, /* 730..1550 mV */
-};
-
-static struct i2c_board_info __initdata palm27x_pi2c_board_info[] = {
-	{
-		I2C_BOARD_INFO("max1586", 0x14),
-		.platform_data	= &palm27x_max1587a_info,
-	},
-};
-
-static struct i2c_pxa_platform_data palm27x_i2c_power_info = {
-	.use_pio	= 1,
-};
-
-void __init palm27x_pmic_init(void)
-{
-	i2c_register_board_info(1, ARRAY_AND_SIZE(palm27x_pi2c_board_info));
-	pxa27x_set_i2c_power_info(&palm27x_i2c_power_info);
-}
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/palmld.c b/ANDROID_3.4.5/arch/arm/mach-pxa/palmld.c
deleted file mode 100644
index 31e0433d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/palmld.c
+++ /dev/null
@@ -1,353 +0,0 @@
-/*
- * Hardware definitions for Palm LifeDrive
- *
- * Author:     Marek Vasut <marek.vasut@gmail.com>
- *
- * Based on work of:
- *		Alex Osborne <ato@meshy.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * (find more info at www.hackndev.com)
- *
- */
-
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/irq.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/pda_power.h>
-#include <linux/pwm_backlight.h>
-#include <linux/gpio.h>
-#include <linux/wm97xx.h>
-#include <linux/power_supply.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <mach/pxa27x.h>
-#include <mach/audio.h>
-#include <mach/palmld.h>
-#include <mach/mmc.h>
-#include <mach/pxafb.h>
-#include <mach/irda.h>
-#include <plat/pxa27x_keypad.h>
-#include <mach/palmasoc.h>
-#include <mach/palm27x.h>
-
-#include "generic.h"
-#include "devices.h"
-
-/******************************************************************************
- * Pin configuration
- ******************************************************************************/
-static unsigned long palmld_pin_config[] __initdata = {
-	/* MMC */
-	GPIO32_MMC_CLK,
-	GPIO92_MMC_DAT_0,
-	GPIO109_MMC_DAT_1,
-	GPIO110_MMC_DAT_2,
-	GPIO111_MMC_DAT_3,
-	GPIO112_MMC_CMD,
-	GPIO14_GPIO,	/* SD detect */
-	GPIO114_GPIO,	/* SD power */
-	GPIO116_GPIO,	/* SD r/o switch */
-
-	/* AC97 */
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-	GPIO89_AC97_SYSCLK,
-	GPIO95_AC97_nRESET,
-
-	/* IrDA */
-	GPIO108_GPIO,	/* ir disable */
-	GPIO46_FICP_RXD,
-	GPIO47_FICP_TXD,
-
-	/* MATRIX KEYPAD */
-	GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO103_KP_MKOUT_0,
-	GPIO104_KP_MKOUT_1,
-	GPIO105_KP_MKOUT_2,
-
-	/* LCD */
-	GPIOxx_LCD_TFT_16BPP,
-
-	/* PWM */
-	GPIO16_PWM0_OUT,
-
-	/* GPIO KEYS */
-	GPIO10_GPIO,	/* hotsync button */
-	GPIO12_GPIO,	/* power switch */
-	GPIO15_GPIO,	/* lock switch */
-
-	/* LEDs */
-	GPIO52_GPIO,	/* green led */
-	GPIO94_GPIO,	/* orange led */
-
-	/* PCMCIA */
-	GPIO48_nPOE,
-	GPIO49_nPWE,
-	GPIO50_nPIOR,
-	GPIO51_nPIOW,
-	GPIO85_nPCE_1,
-	GPIO54_nPCE_2,
-	GPIO79_PSKTSEL,
-	GPIO55_nPREG,
-	GPIO56_nPWAIT,
-	GPIO57_nIOIS16,
-	GPIO36_GPIO,	/* wifi power */
-	GPIO38_GPIO,	/* wifi ready */
-	GPIO81_GPIO,	/* wifi reset */
-
-	/* FFUART */
-	GPIO34_FFUART_RXD,
-	GPIO39_FFUART_TXD,
-
-	/* HDD */
-	GPIO98_GPIO,	/* HDD reset */
-	GPIO115_GPIO,	/* HDD power */
-
-	/* MISC */
-	GPIO13_GPIO,	/* earphone detect */
-};
-
-/******************************************************************************
- * NOR Flash
- ******************************************************************************/
-#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
-static struct mtd_partition palmld_partitions[] = {
-	{
-		.name		= "Flash",
-		.offset		= 0x00000000,
-		.size		= MTDPART_SIZ_FULL,
-		.mask_flags	= 0
-	}
-};
-
-static struct physmap_flash_data palmld_flash_data[] = {
-	{
-		.width		= 2,			/* bankwidth in bytes */
-		.parts		= palmld_partitions,
-		.nr_parts	= ARRAY_SIZE(palmld_partitions)
-	}
-};
-
-static struct resource palmld_flash_resource = {
-	.start	= PXA_CS0_PHYS,
-	.end	= PXA_CS0_PHYS + SZ_4M - 1,
-	.flags	= IORESOURCE_MEM,
-};
-
-static struct platform_device palmld_flash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.resource	= &palmld_flash_resource,
-	.num_resources	= 1,
-	.dev 		= {
-		.platform_data = palmld_flash_data,
-	},
-};
-
-static void __init palmld_nor_init(void)
-{
-	platform_device_register(&palmld_flash);
-}
-#else
-static inline void palmld_nor_init(void) {}
-#endif
-
-/******************************************************************************
- * GPIO keyboard
- ******************************************************************************/
-#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
-static unsigned int palmld_matrix_keys[] = {
-	KEY(0, 1, KEY_F2),
-	KEY(0, 2, KEY_UP),
-
-	KEY(1, 0, KEY_F3),
-	KEY(1, 1, KEY_F4),
-	KEY(1, 2, KEY_RIGHT),
-
-	KEY(2, 0, KEY_F1),
-	KEY(2, 1, KEY_F5),
-	KEY(2, 2, KEY_DOWN),
-
-	KEY(3, 0, KEY_F6),
-	KEY(3, 1, KEY_ENTER),
-	KEY(3, 2, KEY_LEFT),
-};
-
-static struct pxa27x_keypad_platform_data palmld_keypad_platform_data = {
-	.matrix_key_rows	= 4,
-	.matrix_key_cols	= 3,
-	.matrix_key_map		= palmld_matrix_keys,
-	.matrix_key_map_size	= ARRAY_SIZE(palmld_matrix_keys),
-
-	.debounce_interval	= 30,
-};
-
-static void __init palmld_kpc_init(void)
-{
-	pxa_set_keypad_info(&palmld_keypad_platform_data);
-}
-#else
-static inline void palmld_kpc_init(void) {}
-#endif
-
-/******************************************************************************
- * GPIO keys
- ******************************************************************************/
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-static struct gpio_keys_button palmld_pxa_buttons[] = {
-	{KEY_F8, GPIO_NR_PALMLD_HOTSYNC_BUTTON_N, 1, "HotSync Button" },
-	{KEY_F9, GPIO_NR_PALMLD_LOCK_SWITCH, 0, "Lock Switch" },
-	{KEY_POWER, GPIO_NR_PALMLD_POWER_SWITCH, 0, "Power Switch" },
-};
-
-static struct gpio_keys_platform_data palmld_pxa_keys_data = {
-	.buttons	= palmld_pxa_buttons,
-	.nbuttons	= ARRAY_SIZE(palmld_pxa_buttons),
-};
-
-static struct platform_device palmld_pxa_keys = {
-	.name	= "gpio-keys",
-	.id	= -1,
-	.dev	= {
-		.platform_data = &palmld_pxa_keys_data,
-	},
-};
-
-static void __init palmld_keys_init(void)
-{
-	platform_device_register(&palmld_pxa_keys);
-}
-#else
-static inline void palmld_keys_init(void) {}
-#endif
-
-/******************************************************************************
- * LEDs
- ******************************************************************************/
-#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
-struct gpio_led gpio_leds[] = {
-{
-	.name			= "palmld:green:led",
-	.default_trigger	= "none",
-	.gpio			= GPIO_NR_PALMLD_LED_GREEN,
-}, {
-	.name			= "palmld:amber:led",
-	.default_trigger	= "none",
-	.gpio			= GPIO_NR_PALMLD_LED_AMBER,
-},
-};
-
-static struct gpio_led_platform_data gpio_led_info = {
-	.leds		= gpio_leds,
-	.num_leds	= ARRAY_SIZE(gpio_leds),
-};
-
-static struct platform_device palmld_leds = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &gpio_led_info,
-	}
-};
-
-static void __init palmld_leds_init(void)
-{
-	platform_device_register(&palmld_leds);
-}
-#else
-static inline void palmld_leds_init(void) {}
-#endif
-
-/******************************************************************************
- * HDD
- ******************************************************************************/
-#if defined(CONFIG_PATA_PALMLD) || defined(CONFIG_PATA_PALMLD_MODULE)
-static struct platform_device palmld_ide_device = {
-	.name	= "pata_palmld",
-	.id	= -1,
-};
-
-static void __init palmld_ide_init(void)
-{
-	platform_device_register(&palmld_ide_device);
-}
-#else
-static inline void palmld_ide_init(void) {}
-#endif
-
-/******************************************************************************
- * Machine init
- ******************************************************************************/
-static struct map_desc palmld_io_desc[] __initdata = {
-{
-	.virtual	= PALMLD_IDE_VIRT,
-	.pfn		= __phys_to_pfn(PALMLD_IDE_PHYS),
-	.length		= PALMLD_IDE_SIZE,
-	.type		= MT_DEVICE
-},
-{
-	.virtual	= PALMLD_USB_VIRT,
-	.pfn		= __phys_to_pfn(PALMLD_USB_PHYS),
-	.length		= PALMLD_USB_SIZE,
-	.type		= MT_DEVICE
-},
-};
-
-static void __init palmld_map_io(void)
-{
-	pxa27x_map_io();
-	iotable_init(palmld_io_desc, ARRAY_SIZE(palmld_io_desc));
-}
-
-static void __init palmld_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(palmld_pin_config));
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	palm27x_mmc_init(GPIO_NR_PALMLD_SD_DETECT_N, GPIO_NR_PALMLD_SD_READONLY,
-			GPIO_NR_PALMLD_SD_POWER, 0);
-	palm27x_pm_init(PALMLD_STR_BASE);
-	palm27x_lcd_init(-1, &palm_320x480_lcd_mode);
-	palm27x_irda_init(GPIO_NR_PALMLD_IR_DISABLE);
-	palm27x_ac97_init(PALMLD_BAT_MIN_VOLTAGE, PALMLD_BAT_MAX_VOLTAGE,
-			GPIO_NR_PALMLD_EARPHONE_DETECT, 95);
-	palm27x_pwm_init(GPIO_NR_PALMLD_BL_POWER, GPIO_NR_PALMLD_LCD_POWER);
-	palm27x_power_init(GPIO_NR_PALMLD_POWER_DETECT,
-			GPIO_NR_PALMLD_USB_DETECT_N);
-	palm27x_pmic_init();
-	palmld_kpc_init();
-	palmld_keys_init();
-	palmld_nor_init();
-	palmld_leds_init();
-	palmld_ide_init();
-}
-
-MACHINE_START(PALMLD, "Palm LifeDrive")
-	.atag_offset	= 0x100,
-	.map_io		= palmld_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa27x_init_irq,
-	.handle_irq	= pxa27x_handle_irq,
-	.timer		= &pxa_timer,
-	.init_machine	= palmld_init,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/palmt5.c b/ANDROID_3.4.5/arch/arm/mach-pxa/palmt5.c
deleted file mode 100644
index 0f6bd4fc..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/palmt5.c
+++ /dev/null
@@ -1,214 +0,0 @@
-/*
- * Hardware definitions for Palm Tungsten|T5
- *
- * Author:	Marek Vasut <marek.vasut@gmail.com>
- *
- * Based on work of:
- *		Ales Snuparek <snuparek@atlas.cz>
- *		Justin Kendrick <twilightsentry@gmail.com>
- *		RichardT5 <richard_t5@users.sourceforge.net>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * (find more info at www.hackndev.com)
- *
- */
-
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/irq.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/memblock.h>
-#include <linux/pda_power.h>
-#include <linux/pwm_backlight.h>
-#include <linux/gpio.h>
-#include <linux/wm97xx.h>
-#include <linux/power_supply.h>
-#include <linux/usb/gpio_vbus.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <mach/pxa27x.h>
-#include <mach/audio.h>
-#include <mach/palmt5.h>
-#include <mach/mmc.h>
-#include <mach/pxafb.h>
-#include <mach/irda.h>
-#include <plat/pxa27x_keypad.h>
-#include <mach/udc.h>
-#include <mach/palmasoc.h>
-#include <mach/palm27x.h>
-
-#include "generic.h"
-#include "devices.h"
-
-/******************************************************************************
- * Pin configuration
- ******************************************************************************/
-static unsigned long palmt5_pin_config[] __initdata = {
-	/* MMC */
-	GPIO32_MMC_CLK,
-	GPIO92_MMC_DAT_0,
-	GPIO109_MMC_DAT_1,
-	GPIO110_MMC_DAT_2,
-	GPIO111_MMC_DAT_3,
-	GPIO112_MMC_CMD,
-	GPIO14_GPIO,	/* SD detect */
-	GPIO114_GPIO,	/* SD power */
-	GPIO115_GPIO,	/* SD r/o switch */
-
-	/* AC97 */
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-	GPIO89_AC97_SYSCLK,
-	GPIO95_AC97_nRESET,
-
-	/* IrDA */
-	GPIO40_GPIO,	/* ir disable */
-	GPIO46_FICP_RXD,
-	GPIO47_FICP_TXD,
-
-	/* USB */
-	GPIO15_GPIO,	/* usb detect */
-	GPIO93_GPIO,	/* usb power */
-
-	/* MATRIX KEYPAD */
-	GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO103_KP_MKOUT_0,
-	GPIO104_KP_MKOUT_1,
-	GPIO105_KP_MKOUT_2,
-
-	/* LCD */
-	GPIOxx_LCD_TFT_16BPP,
-
-	/* PWM */
-	GPIO16_PWM0_OUT,
-
-	/* FFUART */
-	GPIO34_FFUART_RXD,
-	GPIO39_FFUART_TXD,
-
-	/* MISC */
-	GPIO10_GPIO,	/* hotsync button */
-	GPIO90_GPIO,	/* power detect */
-	GPIO107_GPIO,	/* earphone detect */
-};
-
-/******************************************************************************
- * GPIO keyboard
- ******************************************************************************/
-#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
-static unsigned int palmt5_matrix_keys[] = {
-	KEY(0, 0, KEY_POWER),
-	KEY(0, 1, KEY_F1),
-	KEY(0, 2, KEY_ENTER),
-
-	KEY(1, 0, KEY_F2),
-	KEY(1, 1, KEY_F3),
-	KEY(1, 2, KEY_F4),
-
-	KEY(2, 0, KEY_UP),
-	KEY(2, 2, KEY_DOWN),
-
-	KEY(3, 0, KEY_RIGHT),
-	KEY(3, 2, KEY_LEFT),
-};
-
-static struct pxa27x_keypad_platform_data palmt5_keypad_platform_data = {
-	.matrix_key_rows	= 4,
-	.matrix_key_cols	= 3,
-	.matrix_key_map		= palmt5_matrix_keys,
-	.matrix_key_map_size	= ARRAY_SIZE(palmt5_matrix_keys),
-
-	.debounce_interval	= 30,
-};
-
-static void __init palmt5_kpc_init(void)
-{
-	pxa_set_keypad_info(&palmt5_keypad_platform_data);
-}
-#else
-static inline void palmt5_kpc_init(void) {}
-#endif
-
-/******************************************************************************
- * GPIO keys
- ******************************************************************************/
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-static struct gpio_keys_button palmt5_pxa_buttons[] = {
-	{KEY_F8, GPIO_NR_PALMT5_HOTSYNC_BUTTON_N, 1, "HotSync Button" },
-};
-
-static struct gpio_keys_platform_data palmt5_pxa_keys_data = {
-	.buttons	= palmt5_pxa_buttons,
-	.nbuttons	= ARRAY_SIZE(palmt5_pxa_buttons),
-};
-
-static struct platform_device palmt5_pxa_keys = {
-	.name	= "gpio-keys",
-	.id	= -1,
-	.dev	= {
-		.platform_data = &palmt5_pxa_keys_data,
-	},
-};
-
-static void __init palmt5_keys_init(void)
-{
-	platform_device_register(&palmt5_pxa_keys);
-}
-#else
-static inline void palmt5_keys_init(void) {}
-#endif
-
-/******************************************************************************
- * Machine init
- ******************************************************************************/
-static void __init palmt5_reserve(void)
-{
-	memblock_reserve(0xa0200000, 0x1000);
-}
-
-static void __init palmt5_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(palmt5_pin_config));
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	palm27x_mmc_init(GPIO_NR_PALMT5_SD_DETECT_N, GPIO_NR_PALMT5_SD_READONLY,
-			GPIO_NR_PALMT5_SD_POWER, 0);
-	palm27x_pm_init(PALMT5_STR_BASE);
-	palm27x_lcd_init(-1, &palm_320x480_lcd_mode);
-	palm27x_udc_init(GPIO_NR_PALMT5_USB_DETECT_N,
-			GPIO_NR_PALMT5_USB_PULLUP, 1);
-	palm27x_irda_init(GPIO_NR_PALMT5_IR_DISABLE);
-	palm27x_ac97_init(PALMT5_BAT_MIN_VOLTAGE, PALMT5_BAT_MAX_VOLTAGE,
-			GPIO_NR_PALMT5_EARPHONE_DETECT, 95);
-	palm27x_pwm_init(GPIO_NR_PALMT5_BL_POWER, GPIO_NR_PALMT5_LCD_POWER);
-	palm27x_power_init(GPIO_NR_PALMT5_POWER_DETECT, -1);
-	palm27x_pmic_init();
-	palmt5_kpc_init();
-	palmt5_keys_init();
-}
-
-MACHINE_START(PALMT5, "Palm Tungsten|T5")
-	.atag_offset	= 0x100,
-	.map_io		= pxa27x_map_io,
-	.reserve	= palmt5_reserve,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa27x_init_irq,
-	.handle_irq	= pxa27x_handle_irq,
-	.timer		= &pxa_timer,
-	.init_machine	= palmt5_init,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/palmtc.c b/ANDROID_3.4.5/arch/arm/mach-pxa/palmtc.c
deleted file mode 100644
index e2d97eed..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/palmtc.c
+++ /dev/null
@@ -1,548 +0,0 @@
-/*
- * linux/arch/arm/mach-pxa/palmtc.c
- *
- * Support for the Palm Tungsten|C
- *
- * Author:	Marek Vasut <marek.vasut@gmail.com>
- *
- * Based on work of:
- *		Petr Blaha <p3t3@centrum.cz>
- *		Chetan S. Kumar <shivakumar.chetan@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/irq.h>
-#include <linux/input.h>
-#include <linux/pwm_backlight.h>
-#include <linux/gpio.h>
-#include <linux/input/matrix_keypad.h>
-#include <linux/ucb1400.h>
-#include <linux/power_supply.h>
-#include <linux/gpio_keys.h>
-#include <linux/mtd/physmap.h>
-#include <linux/usb/gpio_vbus.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <mach/pxa25x.h>
-#include <mach/audio.h>
-#include <mach/palmtc.h>
-#include <mach/mmc.h>
-#include <mach/pxafb.h>
-#include <mach/irda.h>
-#include <mach/udc.h>
-
-#include "generic.h"
-#include "devices.h"
-
-/******************************************************************************
- * Pin configuration
- ******************************************************************************/
-static unsigned long palmtc_pin_config[] __initdata = {
-	/* MMC */
-	GPIO6_MMC_CLK,
-	GPIO8_MMC_CS0,
-	GPIO12_GPIO,	/* detect */
-	GPIO32_GPIO,	/* power */
-	GPIO54_GPIO,	/* r/o switch */
-
-	/* PCMCIA */
-	GPIO52_nPCE_1,
-	GPIO53_nPCE_2,
-	GPIO50_nPIOR,
-	GPIO51_nPIOW,
-	GPIO49_nPWE,
-	GPIO48_nPOE,
-	GPIO52_nPCE_1,
-	GPIO53_nPCE_2,
-	GPIO57_nIOIS16,
-	GPIO56_nPWAIT,
-
-	/* AC97 */
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-
-	/* IrDA */
-	GPIO45_GPIO,	/* ir disable */
-	GPIO46_FICP_RXD,
-	GPIO47_FICP_TXD,
-
-	/* PWM */
-	GPIO17_PWM1_OUT,
-
-	/* USB */
-	GPIO4_GPIO,	/* detect */
-	GPIO36_GPIO,	/* pullup */
-
-	/* LCD */
-	GPIOxx_LCD_TFT_16BPP,
-
-	/* MATRIX KEYPAD */
-	GPIO0_GPIO | WAKEUP_ON_EDGE_BOTH,	/* in 0 */
-	GPIO9_GPIO | WAKEUP_ON_EDGE_BOTH,	/* in 1 */
-	GPIO10_GPIO | WAKEUP_ON_EDGE_BOTH,	/* in 2 */
-	GPIO11_GPIO | WAKEUP_ON_EDGE_BOTH,	/* in 3 */
-	GPIO18_GPIO | MFP_LPM_DRIVE_LOW,	/* out 0 */
-	GPIO19_GPIO | MFP_LPM_DRIVE_LOW,	/* out 1 */
-	GPIO20_GPIO | MFP_LPM_DRIVE_LOW,	/* out 2 */
-	GPIO21_GPIO | MFP_LPM_DRIVE_LOW,	/* out 3 */
-	GPIO22_GPIO | MFP_LPM_DRIVE_LOW,	/* out 4 */
-	GPIO23_GPIO | MFP_LPM_DRIVE_LOW,	/* out 5 */
-	GPIO24_GPIO | MFP_LPM_DRIVE_LOW,	/* out 6 */
-	GPIO25_GPIO | MFP_LPM_DRIVE_LOW,	/* out 7 */
-	GPIO26_GPIO | MFP_LPM_DRIVE_LOW,	/* out 8 */
-	GPIO27_GPIO | MFP_LPM_DRIVE_LOW,	/* out 9 */
-	GPIO79_GPIO | MFP_LPM_DRIVE_LOW,	/* out 10 */
-	GPIO80_GPIO | MFP_LPM_DRIVE_LOW,	/* out 11 */
-
-	/* PXA GPIO KEYS */
-	GPIO7_GPIO | WAKEUP_ON_EDGE_BOTH,	/* hotsync button on cradle */
-
-	/* MISC */
-	GPIO1_RST,	/* reset */
-	GPIO2_GPIO,	/* earphone detect */
-	GPIO16_GPIO,	/* backlight switch */
-};
-
-/******************************************************************************
- * SD/MMC card controller
- ******************************************************************************/
-#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
-static struct pxamci_platform_data palmtc_mci_platform_data = {
-	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.gpio_power		= GPIO_NR_PALMTC_SD_POWER,
-	.gpio_card_ro		= GPIO_NR_PALMTC_SD_READONLY,
-	.gpio_card_detect	= GPIO_NR_PALMTC_SD_DETECT_N,
-	.detect_delay_ms	= 200,
-};
-
-static void __init palmtc_mmc_init(void)
-{
-	pxa_set_mci_info(&palmtc_mci_platform_data);
-}
-#else
-static inline void palmtc_mmc_init(void) {}
-#endif
-
-/******************************************************************************
- * GPIO keys
- ******************************************************************************/
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-static struct gpio_keys_button palmtc_pxa_buttons[] = {
-	{KEY_F8, GPIO_NR_PALMTC_HOTSYNC_BUTTON, 1, "HotSync Button", EV_KEY, 1},
-};
-
-static struct gpio_keys_platform_data palmtc_pxa_keys_data = {
-	.buttons	= palmtc_pxa_buttons,
-	.nbuttons	= ARRAY_SIZE(palmtc_pxa_buttons),
-};
-
-static struct platform_device palmtc_pxa_keys = {
-	.name	= "gpio-keys",
-	.id	= -1,
-	.dev	= {
-		.platform_data = &palmtc_pxa_keys_data,
-	},
-};
-
-static void __init palmtc_keys_init(void)
-{
-	platform_device_register(&palmtc_pxa_keys);
-}
-#else
-static inline void palmtc_keys_init(void) {}
-#endif
-
-/******************************************************************************
- * Backlight
- ******************************************************************************/
-#if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE)
-static int palmtc_backlight_init(struct device *dev)
-{
-	int ret;
-
-	ret = gpio_request(GPIO_NR_PALMTC_BL_POWER, "BL POWER");
-	if (ret)
-		goto err;
-	ret = gpio_direction_output(GPIO_NR_PALMTC_BL_POWER, 1);
-	if (ret)
-		goto err2;
-
-	return 0;
-
-err2:
-	gpio_free(GPIO_NR_PALMTC_BL_POWER);
-err:
-	return ret;
-}
-
-static int palmtc_backlight_notify(struct device *dev, int brightness)
-{
-	/* backlight is on when GPIO16 AF0 is high */
-	gpio_set_value(GPIO_NR_PALMTC_BL_POWER, brightness);
-	return brightness;
-}
-
-static void palmtc_backlight_exit(struct device *dev)
-{
-	gpio_free(GPIO_NR_PALMTC_BL_POWER);
-}
-
-static struct platform_pwm_backlight_data palmtc_backlight_data = {
-	.pwm_id		= 1,
-	.max_brightness	= PALMTC_MAX_INTENSITY,
-	.dft_brightness	= PALMTC_MAX_INTENSITY,
-	.pwm_period_ns	= PALMTC_PERIOD_NS,
-	.init		= palmtc_backlight_init,
-	.notify		= palmtc_backlight_notify,
-	.exit		= palmtc_backlight_exit,
-};
-
-static struct platform_device palmtc_backlight = {
-	.name	= "pwm-backlight",
-	.dev	= {
-		.parent		= &pxa25x_device_pwm1.dev,
-		.platform_data	= &palmtc_backlight_data,
-	},
-};
-
-static void __init palmtc_pwm_init(void)
-{
-	platform_device_register(&palmtc_backlight);
-}
-#else
-static inline void palmtc_pwm_init(void) {}
-#endif
-
-/******************************************************************************
- * IrDA
- ******************************************************************************/
-#if defined(CONFIG_IRDA) || defined(CONFIG_IRDA_MODULE)
-static struct pxaficp_platform_data palmtc_ficp_platform_data = {
-	.gpio_pwdown		= GPIO_NR_PALMTC_IR_DISABLE,
-	.transceiver_cap	= IR_SIRMODE | IR_OFF,
-};
-
-static void __init palmtc_irda_init(void)
-{
-	pxa_set_ficp_info(&palmtc_ficp_platform_data);
-}
-#else
-static inline void palmtc_irda_init(void) {}
-#endif
-
-/******************************************************************************
- * Keyboard
- ******************************************************************************/
-#if defined(CONFIG_KEYBOARD_MATRIX) || defined(CONFIG_KEYBOARD_MATRIX_MODULE)
-static const uint32_t palmtc_matrix_keys[] = {
-	KEY(0, 0, KEY_F1),
-	KEY(0, 1, KEY_X),
-	KEY(0, 2, KEY_POWER),
-	KEY(0, 3, KEY_TAB),
-	KEY(0, 4, KEY_A),
-	KEY(0, 5, KEY_Q),
-	KEY(0, 6, KEY_LEFTSHIFT),
-	KEY(0, 7, KEY_Z),
-	KEY(0, 8, KEY_S),
-	KEY(0, 9, KEY_W),
-	KEY(0, 10, KEY_E),
-	KEY(0, 11, KEY_UP),
-
-	KEY(1, 0, KEY_F2),
-	KEY(1, 1, KEY_DOWN),
-	KEY(1, 3, KEY_D),
-	KEY(1, 4, KEY_C),
-	KEY(1, 5, KEY_F),
-	KEY(1, 6, KEY_R),
-	KEY(1, 7, KEY_SPACE),
-	KEY(1, 8, KEY_V),
-	KEY(1, 9, KEY_G),
-	KEY(1, 10, KEY_T),
-	KEY(1, 11, KEY_LEFT),
-
-	KEY(2, 0, KEY_F3),
-	KEY(2, 1, KEY_LEFTCTRL),
-	KEY(2, 3, KEY_H),
-	KEY(2, 4, KEY_Y),
-	KEY(2, 5, KEY_N),
-	KEY(2, 6, KEY_J),
-	KEY(2, 7, KEY_U),
-	KEY(2, 8, KEY_M),
-	KEY(2, 9, KEY_K),
-	KEY(2, 10, KEY_I),
-	KEY(2, 11, KEY_RIGHT),
-
-	KEY(3, 0, KEY_F4),
-	KEY(3, 1, KEY_ENTER),
-	KEY(3, 3, KEY_DOT),
-	KEY(3, 4, KEY_L),
-	KEY(3, 5, KEY_O),
-	KEY(3, 6, KEY_LEFTALT),
-	KEY(3, 7, KEY_ENTER),
-	KEY(3, 8, KEY_BACKSPACE),
-	KEY(3, 9, KEY_P),
-	KEY(3, 10, KEY_B),
-	KEY(3, 11, KEY_FN),
-};
-
-const struct matrix_keymap_data palmtc_keymap_data = {
-	.keymap			= palmtc_matrix_keys,
-	.keymap_size		= ARRAY_SIZE(palmtc_matrix_keys),
-};
-
-static const unsigned int palmtc_keypad_row_gpios[] = {
-	0, 9, 10, 11
-};
-
-static const unsigned int palmtc_keypad_col_gpios[] = {
-	18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 79, 80
-};
-
-static struct matrix_keypad_platform_data palmtc_keypad_platform_data = {
-	.keymap_data	= &palmtc_keymap_data,
-	.row_gpios	= palmtc_keypad_row_gpios,
-	.num_row_gpios	= ARRAY_SIZE(palmtc_keypad_row_gpios),
-	.col_gpios	= palmtc_keypad_col_gpios,
-	.num_col_gpios	= ARRAY_SIZE(palmtc_keypad_col_gpios),
-	.active_low	= 1,
-
-	.debounce_ms		= 20,
-	.col_scan_delay_us	= 5,
-};
-
-static struct platform_device palmtc_keyboard = {
-	.name	= "matrix-keypad",
-	.id	= -1,
-	.dev	= {
-		.platform_data = &palmtc_keypad_platform_data,
-	},
-};
-static void __init palmtc_mkp_init(void)
-{
-	platform_device_register(&palmtc_keyboard);
-}
-#else
-static inline void palmtc_mkp_init(void) {}
-#endif
-
-/******************************************************************************
- * UDC
- ******************************************************************************/
-#if defined(CONFIG_USB_PXA25X)||defined(CONFIG_USB_PXA25X_MODULE)
-static struct gpio_vbus_mach_info palmtc_udc_info = {
-	.gpio_vbus		= GPIO_NR_PALMTC_USB_DETECT_N,
-	.gpio_vbus_inverted	= 1,
-	.gpio_pullup		= GPIO_NR_PALMTC_USB_POWER,
-};
-
-static struct platform_device palmtc_gpio_vbus = {
-	.name	= "gpio-vbus",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &palmtc_udc_info,
-	},
-};
-
-static void __init palmtc_udc_init(void)
-{
-	platform_device_register(&palmtc_gpio_vbus);
-};
-#else
-static inline void palmtc_udc_init(void) {}
-#endif
-
-/******************************************************************************
- * Touchscreen / Battery / GPIO-extender
- ******************************************************************************/
-#if	defined(CONFIG_TOUCHSCREEN_UCB1400) || \
-	defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE)
-static struct platform_device palmtc_ucb1400_device = {
-	.name	= "ucb1400_core",
-	.id	= -1,
-};
-
-static void __init palmtc_ts_init(void)
-{
-	pxa_set_ac97_info(NULL);
-	platform_device_register(&palmtc_ucb1400_device);
-}
-#else
-static inline void palmtc_ts_init(void) {}
-#endif
-
-/******************************************************************************
- * LEDs
- ******************************************************************************/
-#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
-struct gpio_led palmtc_gpio_leds[] = {
-{
-	.name			= "palmtc:green:user",
-	.default_trigger	= "none",
-	.gpio			= GPIO_NR_PALMTC_LED_POWER,
-	.active_low		= 1,
-}, {
-	.name			= "palmtc:vibra:vibra",
-	.default_trigger	= "none",
-	.gpio			= GPIO_NR_PALMTC_VIBRA_POWER,
-	.active_low		= 1,
-}
-
-};
-
-static struct gpio_led_platform_data palmtc_gpio_led_info = {
-	.leds		= palmtc_gpio_leds,
-	.num_leds	= ARRAY_SIZE(palmtc_gpio_leds),
-};
-
-static struct platform_device palmtc_leds = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &palmtc_gpio_led_info,
-	}
-};
-
-static void __init palmtc_leds_init(void)
-{
-	platform_device_register(&palmtc_leds);
-}
-#else
-static inline void palmtc_leds_init(void) {}
-#endif
-
-/******************************************************************************
- * NOR Flash
- ******************************************************************************/
-#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
-static struct resource palmtc_flash_resource = {
-	.start	= PXA_CS0_PHYS,
-	.end	= PXA_CS0_PHYS + SZ_16M - 1,
-	.flags	= IORESOURCE_MEM,
-};
-
-static struct mtd_partition palmtc_flash_parts[] = {
-	{
-		.name	= "U-Boot Bootloader",
-		.offset	= 0x0,
-		.size	= 0x40000,
-	},
-	{
-		.name	= "Linux Kernel",
-		.offset	= 0x40000,
-		.size	= 0x2c0000,
-	},
-	{
-		.name	= "Filesystem",
-		.offset	= 0x300000,
-		.size	= 0xcc0000,
-	},
-	{
-		.name	= "U-Boot Environment",
-		.offset	= 0xfc0000,
-		.size	= MTDPART_SIZ_FULL,
-	},
-};
-
-static struct physmap_flash_data palmtc_flash_data = {
-	.width		= 4,
-	.parts		= palmtc_flash_parts,
-	.nr_parts	= ARRAY_SIZE(palmtc_flash_parts),
-};
-
-static struct platform_device palmtc_flash = {
-	.name		= "physmap-flash",
-	.id		= -1,
-	.resource	= &palmtc_flash_resource,
-	.num_resources	= 1,
-	.dev = {
-		.platform_data	= &palmtc_flash_data,
-	},
-};
-
-static void __init palmtc_nor_init(void)
-{
-	platform_device_register(&palmtc_flash);
-}
-#else
-static inline void palmtc_nor_init(void) {}
-#endif
-
-/******************************************************************************
- * Framebuffer
- ******************************************************************************/
-#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
-static struct pxafb_mode_info palmtc_lcd_modes[] = {
-	{
-		.pixclock	= 115384,
-		.xres		= 320,
-		.yres		= 320,
-		.bpp		= 16,
-
-		.left_margin	= 27,
-		.right_margin	= 7,
-		.upper_margin	= 7,
-		.lower_margin	= 8,
-
-		.hsync_len	= 6,
-		.vsync_len	= 1,
-	},
-};
-
-static struct pxafb_mach_info palmtc_lcd_screen = {
-	.modes			= palmtc_lcd_modes,
-	.num_modes		= ARRAY_SIZE(palmtc_lcd_modes),
-	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
-};
-
-static void __init palmtc_lcd_init(void)
-{
-	pxa_set_fb_info(NULL, &palmtc_lcd_screen);
-}
-#else
-static inline void palmtc_lcd_init(void) {}
-#endif
-
-/******************************************************************************
- * Machine init
- ******************************************************************************/
-static void __init palmtc_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(palmtc_pin_config));
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-	pxa_set_hwuart_info(NULL);
-
-	palmtc_mmc_init();
-	palmtc_keys_init();
-	palmtc_pwm_init();
-	palmtc_irda_init();
-	palmtc_mkp_init();
-	palmtc_udc_init();
-	palmtc_ts_init();
-	palmtc_nor_init();
-	palmtc_lcd_init();
-	palmtc_leds_init();
-};
-
-MACHINE_START(PALMTC, "Palm Tungsten|C")
-	.atag_offset 	= 0x100,
-	.map_io		= pxa25x_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa25x_init_irq,
-	.handle_irq	= pxa25x_handle_irq,
-	.timer		= &pxa_timer,
-	.init_machine	= palmtc_init,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/palmte2.c b/ANDROID_3.4.5/arch/arm/mach-pxa/palmte2.c
deleted file mode 100644
index c054827c..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/palmte2.c
+++ /dev/null
@@ -1,367 +0,0 @@
-/*
- * Hardware definitions for Palm Tungsten|E2
- *
- * Author:
- *	Carlos Eduardo Medaglia Dyonisio <cadu@nerdfeliz.com>
- *
- * Rewrite for mainline:
- *	Marek Vasut <marek.vasut@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * (find more info at www.hackndev.com)
- *
- */
-
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/irq.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/pda_power.h>
-#include <linux/pwm_backlight.h>
-#include <linux/gpio.h>
-#include <linux/wm97xx.h>
-#include <linux/power_supply.h>
-#include <linux/usb/gpio_vbus.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <mach/pxa25x.h>
-#include <mach/audio.h>
-#include <mach/palmte2.h>
-#include <mach/mmc.h>
-#include <mach/pxafb.h>
-#include <mach/irda.h>
-#include <mach/udc.h>
-#include <mach/palmasoc.h>
-
-#include "generic.h"
-#include "devices.h"
-
-/******************************************************************************
- * Pin configuration
- ******************************************************************************/
-static unsigned long palmte2_pin_config[] __initdata = {
-	/* MMC */
-	GPIO6_MMC_CLK,
-	GPIO8_MMC_CS0,
-	GPIO10_GPIO,	/* SD detect */
-	GPIO55_GPIO,	/* SD power */
-	GPIO51_GPIO,	/* SD r/o switch */
-
-	/* AC97 */
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-
-	/* PWM */
-	GPIO16_PWM0_OUT,
-
-	/* USB */
-	GPIO15_GPIO,	/* usb detect */
-	GPIO53_GPIO,	/* usb power */
-
-	/* IrDA */
-	GPIO48_GPIO,	/* ir disable */
-	GPIO46_FICP_RXD,
-	GPIO47_FICP_TXD,
-
-	/* LCD */
-	GPIOxx_LCD_TFT_16BPP,
-
-	/* GPIO KEYS */
-	GPIO5_GPIO,	/* notes */
-	GPIO7_GPIO,	/* tasks */
-	GPIO11_GPIO,	/* calendar */
-	GPIO13_GPIO,	/* contacts */
-	GPIO14_GPIO,	/* center */
-	GPIO19_GPIO,	/* left */
-	GPIO20_GPIO,	/* right */
-	GPIO21_GPIO,	/* down */
-	GPIO22_GPIO,	/* up */
-
-	/* MISC */
-	GPIO1_RST,	/* reset */
-	GPIO4_GPIO,	/* Hotsync button */
-	GPIO9_GPIO,	/* power detect */
-	GPIO15_GPIO,	/* earphone detect */
-	GPIO37_GPIO,	/* LCD power */
-	GPIO56_GPIO,	/* Backlight power */
-};
-
-/******************************************************************************
- * SD/MMC card controller
- ******************************************************************************/
-static struct pxamci_platform_data palmte2_mci_platform_data = {
-	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.gpio_card_detect	= GPIO_NR_PALMTE2_SD_DETECT_N,
-	.gpio_card_ro		= GPIO_NR_PALMTE2_SD_READONLY,
-	.gpio_power		= GPIO_NR_PALMTE2_SD_POWER,
-};
-
-/******************************************************************************
- * GPIO keys
- ******************************************************************************/
-static struct gpio_keys_button palmte2_pxa_buttons[] = {
-	{KEY_F1,	GPIO_NR_PALMTE2_KEY_CONTACTS,	1, "Contacts" },
-	{KEY_F2,	GPIO_NR_PALMTE2_KEY_CALENDAR,	1, "Calendar" },
-	{KEY_F3,	GPIO_NR_PALMTE2_KEY_TASKS,	1, "Tasks" },
-	{KEY_F4,	GPIO_NR_PALMTE2_KEY_NOTES,	1, "Notes" },
-	{KEY_ENTER,	GPIO_NR_PALMTE2_KEY_CENTER,	1, "Center" },
-	{KEY_LEFT,	GPIO_NR_PALMTE2_KEY_LEFT,	1, "Left" },
-	{KEY_RIGHT,	GPIO_NR_PALMTE2_KEY_RIGHT,	1, "Right" },
-	{KEY_DOWN,	GPIO_NR_PALMTE2_KEY_DOWN,	1, "Down" },
-	{KEY_UP,	GPIO_NR_PALMTE2_KEY_UP,		1, "Up" },
-};
-
-static struct gpio_keys_platform_data palmte2_pxa_keys_data = {
-	.buttons	= palmte2_pxa_buttons,
-	.nbuttons	= ARRAY_SIZE(palmte2_pxa_buttons),
-};
-
-static struct platform_device palmte2_pxa_keys = {
-	.name	= "gpio-keys",
-	.id	= -1,
-	.dev	= {
-		.platform_data = &palmte2_pxa_keys_data,
-	},
-};
-
-/******************************************************************************
- * Backlight
- ******************************************************************************/
-static struct gpio palmte_bl_gpios[] = {
-	{ GPIO_NR_PALMTE2_BL_POWER, GPIOF_INIT_LOW, "Backlight power" },
-	{ GPIO_NR_PALMTE2_LCD_POWER, GPIOF_INIT_LOW, "LCD power" },
-};
-
-static int palmte2_backlight_init(struct device *dev)
-{
-	return gpio_request_array(ARRAY_AND_SIZE(palmte_bl_gpios));
-}
-
-static int palmte2_backlight_notify(struct device *dev, int brightness)
-{
-	gpio_set_value(GPIO_NR_PALMTE2_BL_POWER, brightness);
-	gpio_set_value(GPIO_NR_PALMTE2_LCD_POWER, brightness);
-	return brightness;
-}
-
-static void palmte2_backlight_exit(struct device *dev)
-{
-	gpio_free_array(ARRAY_AND_SIZE(palmte_bl_gpios));
-}
-
-static struct platform_pwm_backlight_data palmte2_backlight_data = {
-	.pwm_id		= 0,
-	.max_brightness	= PALMTE2_MAX_INTENSITY,
-	.dft_brightness	= PALMTE2_MAX_INTENSITY,
-	.pwm_period_ns	= PALMTE2_PERIOD_NS,
-	.init		= palmte2_backlight_init,
-	.notify		= palmte2_backlight_notify,
-	.exit		= palmte2_backlight_exit,
-};
-
-static struct platform_device palmte2_backlight = {
-	.name	= "pwm-backlight",
-	.dev	= {
-		.parent		= &pxa25x_device_pwm0.dev,
-		.platform_data	= &palmte2_backlight_data,
-	},
-};
-
-/******************************************************************************
- * IrDA
- ******************************************************************************/
-static struct pxaficp_platform_data palmte2_ficp_platform_data = {
-	.gpio_pwdown		= GPIO_NR_PALMTE2_IR_DISABLE,
-	.transceiver_cap	= IR_SIRMODE | IR_OFF,
-};
-
-/******************************************************************************
- * UDC
- ******************************************************************************/
-static struct gpio_vbus_mach_info palmte2_udc_info = {
-	.gpio_vbus		= GPIO_NR_PALMTE2_USB_DETECT_N,
-	.gpio_vbus_inverted	= 1,
-	.gpio_pullup		= GPIO_NR_PALMTE2_USB_PULLUP,
-};
-
-static struct platform_device palmte2_gpio_vbus = {
-	.name	= "gpio-vbus",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &palmte2_udc_info,
-	},
-};
-
-/******************************************************************************
- * Power supply
- ******************************************************************************/
-static int power_supply_init(struct device *dev)
-{
-	int ret;
-
-	ret = gpio_request(GPIO_NR_PALMTE2_POWER_DETECT, "CABLE_STATE_AC");
-	if (ret)
-		goto err1;
-	ret = gpio_direction_input(GPIO_NR_PALMTE2_POWER_DETECT);
-	if (ret)
-		goto err2;
-
-	return 0;
-
-err2:
-	gpio_free(GPIO_NR_PALMTE2_POWER_DETECT);
-err1:
-	return ret;
-}
-
-static int palmte2_is_ac_online(void)
-{
-	return gpio_get_value(GPIO_NR_PALMTE2_POWER_DETECT);
-}
-
-static void power_supply_exit(struct device *dev)
-{
-	gpio_free(GPIO_NR_PALMTE2_POWER_DETECT);
-}
-
-static char *palmte2_supplicants[] = {
-	"main-battery",
-};
-
-static struct pda_power_pdata power_supply_info = {
-	.init            = power_supply_init,
-	.is_ac_online    = palmte2_is_ac_online,
-	.exit            = power_supply_exit,
-	.supplied_to     = palmte2_supplicants,
-	.num_supplicants = ARRAY_SIZE(palmte2_supplicants),
-};
-
-static struct platform_device power_supply = {
-	.name = "pda-power",
-	.id   = -1,
-	.dev  = {
-		.platform_data = &power_supply_info,
-	},
-};
-
-/******************************************************************************
- * WM97xx audio, battery
- ******************************************************************************/
-static struct wm97xx_batt_pdata palmte2_batt_pdata = {
-	.batt_aux	= WM97XX_AUX_ID3,
-	.temp_aux	= WM97XX_AUX_ID2,
-	.charge_gpio	= -1,
-	.max_voltage	= PALMTE2_BAT_MAX_VOLTAGE,
-	.min_voltage	= PALMTE2_BAT_MIN_VOLTAGE,
-	.batt_mult	= 1000,
-	.batt_div	= 414,
-	.temp_mult	= 1,
-	.temp_div	= 1,
-	.batt_tech	= POWER_SUPPLY_TECHNOLOGY_LIPO,
-	.batt_name	= "main-batt",
-};
-
-static struct wm97xx_pdata palmte2_wm97xx_pdata = {
-	.batt_pdata	= &palmte2_batt_pdata,
-};
-
-static pxa2xx_audio_ops_t palmte2_ac97_pdata = {
-	.codec_pdata	= { &palmte2_wm97xx_pdata, },
-};
-
-static struct palm27x_asoc_info palmte2_asoc_pdata = {
-	.jack_gpio	= GPIO_NR_PALMTE2_EARPHONE_DETECT,
-};
-
-static struct platform_device palmte2_asoc = {
-	.name = "palm27x-asoc",
-	.id   = -1,
-	.dev  = {
-		.platform_data = &palmte2_asoc_pdata,
-	},
-};
-
-/******************************************************************************
- * Framebuffer
- ******************************************************************************/
-static struct pxafb_mode_info palmte2_lcd_modes[] = {
-{
-	.pixclock	= 77757,
-	.xres		= 320,
-	.yres		= 320,
-	.bpp		= 16,
-
-	.left_margin	= 28,
-	.right_margin	= 7,
-	.upper_margin	= 7,
-	.lower_margin	= 5,
-
-	.hsync_len	= 4,
-	.vsync_len	= 1,
-},
-};
-
-static struct pxafb_mach_info palmte2_lcd_screen = {
-	.modes		= palmte2_lcd_modes,
-	.num_modes	= ARRAY_SIZE(palmte2_lcd_modes),
-	.lcd_conn	= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
-};
-
-/******************************************************************************
- * Machine init
- ******************************************************************************/
-static struct platform_device *devices[] __initdata = {
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-	&palmte2_pxa_keys,
-#endif
-	&palmte2_backlight,
-	&power_supply,
-	&palmte2_asoc,
-	&palmte2_gpio_vbus,
-};
-
-/* setup udc GPIOs initial state */
-static void __init palmte2_udc_init(void)
-{
-	if (!gpio_request(GPIO_NR_PALMTE2_USB_PULLUP, "UDC Vbus")) {
-		gpio_direction_output(GPIO_NR_PALMTE2_USB_PULLUP, 1);
-		gpio_free(GPIO_NR_PALMTE2_USB_PULLUP);
-	}
-}
-
-static void __init palmte2_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(palmte2_pin_config));
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	pxa_set_fb_info(NULL, &palmte2_lcd_screen);
-	pxa_set_mci_info(&palmte2_mci_platform_data);
-	palmte2_udc_init();
-	pxa_set_ac97_info(&palmte2_ac97_pdata);
-	pxa_set_ficp_info(&palmte2_ficp_platform_data);
-
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-}
-
-MACHINE_START(PALMTE2, "Palm Tungsten|E2")
-	.atag_offset	= 0x100,
-	.map_io		= pxa25x_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa25x_init_irq,
-	.handle_irq	= pxa25x_handle_irq,
-	.timer		= &pxa_timer,
-	.init_machine	= palmte2_init,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/palmtreo.c b/ANDROID_3.4.5/arch/arm/mach-pxa/palmtreo.c
deleted file mode 100644
index fbdebee3..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/palmtreo.c
+++ /dev/null
@@ -1,472 +0,0 @@
-/*
- * Hardware definitions for Palm Treo smartphones
- *
- * currently supported:
- *     Palm Treo 680 (GSM)
- *     Palm Centro 685 (GSM)
- *
- * Author:     Tomas Cech <sleep_walker@suse.cz>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * (find more info at www.hackndev.com)
- *
- */
-
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/irq.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/memblock.h>
-#include <linux/pda_power.h>
-#include <linux/pwm_backlight.h>
-#include <linux/gpio.h>
-#include <linux/power_supply.h>
-#include <linux/w1-gpio.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <mach/pxa27x.h>
-#include <mach/pxa27x-udc.h>
-#include <mach/audio.h>
-#include <mach/palmtreo.h>
-#include <mach/mmc.h>
-#include <mach/pxafb.h>
-#include <mach/irda.h>
-#include <plat/pxa27x_keypad.h>
-#include <mach/udc.h>
-#include <mach/ohci.h>
-#include <mach/pxa2xx-regs.h>
-#include <mach/palmasoc.h>
-#include <mach/camera.h>
-#include <mach/palm27x.h>
-
-#include <sound/pxa2xx-lib.h>
-
-#include "generic.h"
-#include "devices.h"
-
-/******************************************************************************
- * Pin configuration
- ******************************************************************************/
-static unsigned long treo_pin_config[] __initdata = {
-	/* MMC */
-	GPIO32_MMC_CLK,
-	GPIO92_MMC_DAT_0,
-	GPIO109_MMC_DAT_1,
-	GPIO110_MMC_DAT_2,
-	GPIO111_MMC_DAT_3,
-	GPIO112_MMC_CMD,
-	GPIO113_GPIO,				/* SD detect */
-
-	/* AC97 */
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-	GPIO89_AC97_SYSCLK,
-	GPIO95_AC97_nRESET,
-
-	/* IrDA */
-	GPIO46_FICP_RXD,
-	GPIO47_FICP_TXD,
-
-	/* PWM */
-	GPIO16_PWM0_OUT,
-
-	/* USB */
-	GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,	/* usb detect */
-
-	/* MATRIX KEYPAD */
-	GPIO101_KP_MKIN_1,
-	GPIO102_KP_MKIN_2,
-	GPIO97_KP_MKIN_3,
-	GPIO98_KP_MKIN_4,
-	GPIO91_KP_MKIN_6,
-	GPIO13_KP_MKIN_7,
-	GPIO103_KP_MKOUT_0 | MFP_LPM_DRIVE_HIGH,
-	GPIO104_KP_MKOUT_1,
-	GPIO105_KP_MKOUT_2,
-	GPIO106_KP_MKOUT_3,
-	GPIO107_KP_MKOUT_4,
-	GPIO108_KP_MKOUT_5,
-	GPIO96_KP_MKOUT_6,
-	GPIO93_KP_DKIN_0 | WAKEUP_ON_LEVEL_HIGH,	/* Hotsync button */
-
-	/* LCD */
-	GPIOxx_LCD_TFT_16BPP,
-
-	/* Quick Capture Interface */
-	GPIO84_CIF_FV,
-	GPIO85_CIF_LV,
-	GPIO53_CIF_MCLK,
-	GPIO54_CIF_PCLK,
-	GPIO81_CIF_DD_0,
-	GPIO55_CIF_DD_1,
-	GPIO51_CIF_DD_2,
-	GPIO50_CIF_DD_3,
-	GPIO52_CIF_DD_4,
-	GPIO48_CIF_DD_5,
-	GPIO17_CIF_DD_6,
-	GPIO12_CIF_DD_7,
-
-	/* I2C */
-	GPIO117_I2C_SCL,
-	GPIO118_I2C_SDA,
-
-	/* GSM */
-	GPIO14_GPIO | WAKEUP_ON_EDGE_BOTH,	/* GSM host wake up */
-	GPIO34_FFUART_RXD,
-	GPIO35_FFUART_CTS,
-	GPIO39_FFUART_TXD,
-	GPIO41_FFUART_RTS,
-
-	/* MISC. */
-	GPIO0_GPIO | WAKEUP_ON_EDGE_BOTH,	/* external power detect */
-	GPIO15_GPIO | WAKEUP_ON_EDGE_BOTH,	/* silent switch */
-	GPIO116_GPIO,				/* headphone detect */
-	GPIO11_GPIO | WAKEUP_ON_EDGE_BOTH,	/* bluetooth host wake up */
-};
-
-#ifdef CONFIG_MACH_TREO680
-static unsigned long treo680_pin_config[] __initdata = {
-	GPIO33_GPIO,    /* SD read only */
-
-	/* MATRIX KEYPAD - different wake up source */
-	GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO99_KP_MKIN_5,
-};
-#endif /* CONFIG_MACH_TREO680 */
-
-#ifdef CONFIG_MACH_CENTRO
-static unsigned long centro685_pin_config[] __initdata = {
-	/* Bluetooth attached to BT UART*/
-	MFP_CFG_OUT(GPIO80, AF0, DRIVE_LOW),    /* power: LOW = off */
-	GPIO42_BTUART_RXD,
-	GPIO43_BTUART_TXD,
-	GPIO44_BTUART_CTS,
-	GPIO45_BTUART_RTS,
-
-	/* MATRIX KEYPAD - different wake up source */
-	GPIO100_KP_MKIN_0,
-	GPIO99_KP_MKIN_5 | WAKEUP_ON_LEVEL_HIGH,
-};
-#endif /* CONFIG_MACH_CENTRO */
-
-/******************************************************************************
- * GPIO keyboard
- ******************************************************************************/
-#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
-static unsigned int treo680_matrix_keys[] = {
-	KEY(0, 0, KEY_F8),		/* Red/Off/Power */
-	KEY(0, 1, KEY_LEFT),
-	KEY(0, 2, KEY_LEFTCTRL),	/* Alternate */
-	KEY(0, 3, KEY_L),
-	KEY(0, 4, KEY_A),
-	KEY(0, 5, KEY_Q),
-	KEY(0, 6, KEY_P),
-
-	KEY(1, 0, KEY_RIGHTCTRL),	/* Menu */
-	KEY(1, 1, KEY_RIGHT),
-	KEY(1, 2, KEY_LEFTSHIFT),	/* Left shift */
-	KEY(1, 3, KEY_Z),
-	KEY(1, 4, KEY_S),
-	KEY(1, 5, KEY_W),
-
-	KEY(2, 0, KEY_F1),		/* Phone */
-	KEY(2, 1, KEY_UP),
-	KEY(2, 2, KEY_0),
-	KEY(2, 3, KEY_X),
-	KEY(2, 4, KEY_D),
-	KEY(2, 5, KEY_E),
-
-	KEY(3, 0, KEY_F10),		/* Calendar */
-	KEY(3, 1, KEY_DOWN),
-	KEY(3, 2, KEY_SPACE),
-	KEY(3, 3, KEY_C),
-	KEY(3, 4, KEY_F),
-	KEY(3, 5, KEY_R),
-
-	KEY(4, 0, KEY_F12),		/* Mail */
-	KEY(4, 1, KEY_KPENTER),
-	KEY(4, 2, KEY_RIGHTALT),	/* Alt */
-	KEY(4, 3, KEY_V),
-	KEY(4, 4, KEY_G),
-	KEY(4, 5, KEY_T),
-
-	KEY(5, 0, KEY_F9),		/* Home */
-	KEY(5, 1, KEY_PAGEUP),		/* Side up */
-	KEY(5, 2, KEY_DOT),
-	KEY(5, 3, KEY_B),
-	KEY(5, 4, KEY_H),
-	KEY(5, 5, KEY_Y),
-
-	KEY(6, 0, KEY_TAB),		/* Side Activate */
-	KEY(6, 1, KEY_PAGEDOWN),	/* Side down */
-	KEY(6, 2, KEY_ENTER),
-	KEY(6, 3, KEY_N),
-	KEY(6, 4, KEY_J),
-	KEY(6, 5, KEY_U),
-
-	KEY(7, 0, KEY_F6),		/* Green/Call */
-	KEY(7, 1, KEY_O),
-	KEY(7, 2, KEY_BACKSPACE),
-	KEY(7, 3, KEY_M),
-	KEY(7, 4, KEY_K),
-	KEY(7, 5, KEY_I),
-};
-
-static unsigned int centro_matrix_keys[] = {
-	KEY(0, 0, KEY_F9),		/* Home */
-	KEY(0, 1, KEY_LEFT),
-	KEY(0, 2, KEY_LEFTCTRL),	/* Alternate */
-	KEY(0, 3, KEY_L),
-	KEY(0, 4, KEY_A),
-	KEY(0, 5, KEY_Q),
-	KEY(0, 6, KEY_P),
-
-	KEY(1, 0, KEY_RIGHTCTRL),	/* Menu */
-	KEY(1, 1, KEY_RIGHT),
-	KEY(1, 2, KEY_LEFTSHIFT),	/* Left shift */
-	KEY(1, 3, KEY_Z),
-	KEY(1, 4, KEY_S),
-	KEY(1, 5, KEY_W),
-
-	KEY(2, 0, KEY_F1),		/* Phone */
-	KEY(2, 1, KEY_UP),
-	KEY(2, 2, KEY_0),
-	KEY(2, 3, KEY_X),
-	KEY(2, 4, KEY_D),
-	KEY(2, 5, KEY_E),
-
-	KEY(3, 0, KEY_F10),		/* Calendar */
-	KEY(3, 1, KEY_DOWN),
-	KEY(3, 2, KEY_SPACE),
-	KEY(3, 3, KEY_C),
-	KEY(3, 4, KEY_F),
-	KEY(3, 5, KEY_R),
-
-	KEY(4, 0, KEY_F12),		/* Mail */
-	KEY(4, 1, KEY_KPENTER),
-	KEY(4, 2, KEY_RIGHTALT),	/* Alt */
-	KEY(4, 3, KEY_V),
-	KEY(4, 4, KEY_G),
-	KEY(4, 5, KEY_T),
-
-	KEY(5, 0, KEY_F8),		/* Red/Off/Power */
-	KEY(5, 1, KEY_PAGEUP),		/* Side up */
-	KEY(5, 2, KEY_DOT),
-	KEY(5, 3, KEY_B),
-	KEY(5, 4, KEY_H),
-	KEY(5, 5, KEY_Y),
-
-	KEY(6, 0, KEY_TAB),		/* Side Activate */
-	KEY(6, 1, KEY_PAGEDOWN),	/* Side down */
-	KEY(6, 2, KEY_ENTER),
-	KEY(6, 3, KEY_N),
-	KEY(6, 4, KEY_J),
-	KEY(6, 5, KEY_U),
-
-	KEY(7, 0, KEY_F6),		/* Green/Call */
-	KEY(7, 1, KEY_O),
-	KEY(7, 2, KEY_BACKSPACE),
-	KEY(7, 3, KEY_M),
-	KEY(7, 4, KEY_K),
-	KEY(7, 5, KEY_I),
-};
-
-static struct pxa27x_keypad_platform_data treo680_keypad_pdata = {
-	.matrix_key_rows	= 8,
-	.matrix_key_cols	= 7,
-	.matrix_key_map		= treo680_matrix_keys,
-	.matrix_key_map_size	= ARRAY_SIZE(treo680_matrix_keys),
-	.direct_key_map		= { KEY_CONNECT },
-	.direct_key_num		= 1,
-
-	.debounce_interval	= 30,
-};
-
-static void __init palmtreo_kpc_init(void)
-{
-	static struct pxa27x_keypad_platform_data *data = &treo680_keypad_pdata;
-
-	if (machine_is_centro()) {
-		data->matrix_key_map = centro_matrix_keys;
-		data->matrix_key_map_size = ARRAY_SIZE(centro_matrix_keys);
-	}
-
-	pxa_set_keypad_info(&treo680_keypad_pdata);
-}
-#else
-static inline void palmtreo_kpc_init(void) {}
-#endif
-
-/******************************************************************************
- * USB host
- ******************************************************************************/
-#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-static struct pxaohci_platform_data treo680_ohci_info = {
-	.port_mode    = PMM_PERPORT_MODE,
-	.flags        = ENABLE_PORT1 | ENABLE_PORT3,
-	.power_budget = 0,
-};
-
-static void __init palmtreo_uhc_init(void)
-{
-	if (machine_is_treo680())
-		pxa_set_ohci_info(&treo680_ohci_info);
-}
-#else
-static inline void palmtreo_uhc_init(void) {}
-#endif
-
-/******************************************************************************
- * Vibra and LEDs
- ******************************************************************************/
-#ifdef CONFIG_MACH_TREO680
-static struct gpio_led treo680_gpio_leds[] = {
-	{
-		.name			= "treo680:vibra:vibra",
-		.default_trigger	= "none",
-		.gpio			= GPIO_NR_TREO680_VIBRATE_EN,
-	},
-	{
-		.name			= "treo680:green:led",
-		.default_trigger	= "mmc0",
-		.gpio			= GPIO_NR_TREO_GREEN_LED,
-	},
-	{
-		.name			= "treo680:white:keybbl",
-		.default_trigger	= "none",
-		.gpio			= GPIO_NR_TREO680_KEYB_BL,
-	},
-};
-
-static struct gpio_led_platform_data treo680_gpio_led_info = {
-	.leds		= treo680_gpio_leds,
-	.num_leds	= ARRAY_SIZE(treo680_gpio_leds),
-};
-
-static struct gpio_led centro_gpio_leds[] = {
-	{
-		.name			= "centro:vibra:vibra",
-		.default_trigger	= "none",
-		.gpio			= GPIO_NR_CENTRO_VIBRATE_EN,
-	},
-	{
-		.name			= "centro:green:led",
-		.default_trigger	= "mmc0",
-		.gpio			= GPIO_NR_TREO_GREEN_LED,
-	},
-	{
-		.name			= "centro:white:keybbl",
-		.default_trigger	= "none",
-		.active_low		= 1,
-		.gpio			= GPIO_NR_CENTRO_KEYB_BL,
-	},
-};
-
-static struct gpio_led_platform_data centro_gpio_led_info = {
-	.leds		= centro_gpio_leds,
-	.num_leds	= ARRAY_SIZE(centro_gpio_leds),
-};
-
-static struct platform_device palmtreo_leds = {
-	.name   = "leds-gpio",
-	.id     = -1,
-	.dev    = {
-		.platform_data  = &treo680_gpio_led_info,
-	}
-};
-
-static void __init palmtreo_leds_init(void)
-{
-	if (machine_is_centro())
-		palmtreo_leds.dev.platform_data = &centro_gpio_led_info;
-
-	platform_device_register(&palmtreo_leds);
-}
-#else
-static inline void palmtreo_leds_init(void) {}
-#endif
-
-/******************************************************************************
- * Machine init
- ******************************************************************************/
-static void __init treo_reserve(void)
-{
-	memblock_reserve(0xa0000000, 0x1000);
-	memblock_reserve(0xa2000000, 0x1000);
-}
-
-static void __init palmphone_common_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(treo_pin_config));
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-	palm27x_pm_init(TREO_STR_BASE);
-	palm27x_lcd_init(GPIO_NR_TREO_BL_POWER, &palm_320x320_new_lcd_mode);
-	palm27x_udc_init(GPIO_NR_TREO_USB_DETECT, GPIO_NR_TREO_USB_PULLUP, 1);
-	palm27x_irda_init(GPIO_NR_TREO_IR_EN);
-	palm27x_ac97_init(-1, -1, -1, 95);
-	palm27x_pwm_init(GPIO_NR_TREO_BL_POWER, -1);
-	palm27x_power_init(GPIO_NR_TREO_POWER_DETECT, -1);
-	palm27x_pmic_init();
-	palmtreo_kpc_init();
-	palmtreo_uhc_init();
-	palmtreo_leds_init();
-}
-
-#ifdef CONFIG_MACH_TREO680
-static void __init treo680_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(treo680_pin_config));
-	palmphone_common_init();
-	palm27x_mmc_init(GPIO_NR_TREO_SD_DETECT_N, GPIO_NR_TREO680_SD_READONLY,
-			GPIO_NR_TREO680_SD_POWER, 0);
-}
-#endif
-
-#ifdef CONFIG_MACH_CENTRO
-static void __init centro_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(centro685_pin_config));
-	palmphone_common_init();
-	palm27x_mmc_init(GPIO_NR_TREO_SD_DETECT_N, -1,
-			GPIO_NR_CENTRO_SD_POWER, 1);
-}
-#endif
-
-#ifdef CONFIG_MACH_TREO680
-MACHINE_START(TREO680, "Palm Treo 680")
-	.atag_offset    = 0x100,
-	.map_io         = pxa27x_map_io,
-	.reserve	= treo_reserve,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq       = pxa27x_init_irq,
-	.handle_irq       = pxa27x_handle_irq,
-	.timer          = &pxa_timer,
-	.init_machine   = treo680_init,
-	.restart	= pxa_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_CENTRO
-MACHINE_START(CENTRO, "Palm Centro 685")
-	.atag_offset    = 0x100,
-	.map_io         = pxa27x_map_io,
-	.reserve	= treo_reserve,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq       = pxa27x_init_irq,
-	.handle_irq       = pxa27x_handle_irq,
-	.timer          = &pxa_timer,
-	.init_machine	= centro_init,
-	.restart	= pxa_restart,
-MACHINE_END
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/palmtx.c b/ANDROID_3.4.5/arch/arm/mach-pxa/palmtx.c
deleted file mode 100644
index 9507605e..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/palmtx.c
+++ /dev/null
@@ -1,375 +0,0 @@
-/*
- * Hardware definitions for PalmTX
- *
- * Author:     Marek Vasut <marek.vasut@gmail.com>
- *
- * Based on work of:
- *		Alex Osborne <ato@meshy.org>
- *		Cristiano P. <cristianop@users.sourceforge.net>
- *		Jan Herman <2hp@seznam.cz>
- *		Michal Hrusecky
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * (find more info at www.hackndev.com)
- *
- */
-
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/irq.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/pda_power.h>
-#include <linux/pwm_backlight.h>
-#include <linux/gpio.h>
-#include <linux/wm97xx.h>
-#include <linux/power_supply.h>
-#include <linux/usb/gpio_vbus.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/physmap.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <mach/pxa27x.h>
-#include <mach/audio.h>
-#include <mach/palmtx.h>
-#include <mach/mmc.h>
-#include <mach/pxafb.h>
-#include <mach/irda.h>
-#include <plat/pxa27x_keypad.h>
-#include <mach/udc.h>
-#include <mach/palmasoc.h>
-#include <mach/palm27x.h>
-
-#include "generic.h"
-#include "devices.h"
-
-/******************************************************************************
- * Pin configuration
- ******************************************************************************/
-static unsigned long palmtx_pin_config[] __initdata = {
-	/* MMC */
-	GPIO32_MMC_CLK,
-	GPIO92_MMC_DAT_0,
-	GPIO109_MMC_DAT_1,
-	GPIO110_MMC_DAT_2,
-	GPIO111_MMC_DAT_3,
-	GPIO112_MMC_CMD,
-	GPIO14_GPIO,	/* SD detect */
-	GPIO114_GPIO,	/* SD power */
-	GPIO115_GPIO,	/* SD r/o switch */
-
-	/* AC97 */
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-	GPIO89_AC97_SYSCLK,
-	GPIO95_AC97_nRESET,
-
-	/* IrDA */
-	GPIO40_GPIO,	/* ir disable */
-	GPIO46_FICP_RXD,
-	GPIO47_FICP_TXD,
-
-	/* PWM */
-	GPIO16_PWM0_OUT,
-
-	/* USB */
-	GPIO13_GPIO,	/* usb detect */
-	GPIO93_GPIO,	/* usb power */
-
-	/* PCMCIA */
-	GPIO48_nPOE,
-	GPIO49_nPWE,
-	GPIO50_nPIOR,
-	GPIO51_nPIOW,
-	GPIO85_nPCE_1,
-	GPIO54_nPCE_2,
-	GPIO79_PSKTSEL,
-	GPIO55_nPREG,
-	GPIO56_nPWAIT,
-	GPIO57_nIOIS16,
-	GPIO94_GPIO,	/* wifi power 1 */
-	GPIO108_GPIO,	/* wifi power 2 */
-	GPIO116_GPIO,	/* wifi ready */
-
-	/* MATRIX KEYPAD */
-	GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO103_KP_MKOUT_0,
-	GPIO104_KP_MKOUT_1,
-	GPIO105_KP_MKOUT_2,
-
-	/* LCD */
-	GPIOxx_LCD_TFT_16BPP,
-
-	/* FFUART */
-	GPIO34_FFUART_RXD,
-	GPIO39_FFUART_TXD,
-
-	/* NAND */
-	GPIO15_nCS_1,
-	GPIO18_RDY,
-
-	/* MISC. */
-	GPIO10_GPIO,	/* hotsync button */
-	GPIO12_GPIO,	/* power detect */
-	GPIO107_GPIO,	/* earphone detect */
-};
-
-/******************************************************************************
- * NOR Flash
- ******************************************************************************/
-#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
-static struct mtd_partition palmtx_partitions[] = {
-	{
-		.name		= "Flash",
-		.offset		= 0x00000000,
-		.size		= MTDPART_SIZ_FULL,
-		.mask_flags	= 0
-	}
-};
-
-static struct physmap_flash_data palmtx_flash_data[] = {
-	{
-		.width		= 2,			/* bankwidth in bytes */
-		.parts		= palmtx_partitions,
-		.nr_parts	= ARRAY_SIZE(palmtx_partitions)
-	}
-};
-
-static struct resource palmtx_flash_resource = {
-	.start	= PXA_CS0_PHYS,
-	.end	= PXA_CS0_PHYS + SZ_8M - 1,
-	.flags	= IORESOURCE_MEM,
-};
-
-static struct platform_device palmtx_flash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.resource	= &palmtx_flash_resource,
-	.num_resources	= 1,
-	.dev 		= {
-		.platform_data = palmtx_flash_data,
-	},
-};
-
-static void __init palmtx_nor_init(void)
-{
-	platform_device_register(&palmtx_flash);
-}
-#else
-static inline void palmtx_nor_init(void) {}
-#endif
-
-/******************************************************************************
- * GPIO keyboard
- ******************************************************************************/
-#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
-static unsigned int palmtx_matrix_keys[] = {
-	KEY(0, 0, KEY_POWER),
-	KEY(0, 1, KEY_F1),
-	KEY(0, 2, KEY_ENTER),
-
-	KEY(1, 0, KEY_F2),
-	KEY(1, 1, KEY_F3),
-	KEY(1, 2, KEY_F4),
-
-	KEY(2, 0, KEY_UP),
-	KEY(2, 2, KEY_DOWN),
-
-	KEY(3, 0, KEY_RIGHT),
-	KEY(3, 2, KEY_LEFT),
-};
-
-static struct pxa27x_keypad_platform_data palmtx_keypad_platform_data = {
-	.matrix_key_rows	= 4,
-	.matrix_key_cols	= 3,
-	.matrix_key_map		= palmtx_matrix_keys,
-	.matrix_key_map_size	= ARRAY_SIZE(palmtx_matrix_keys),
-
-	.debounce_interval	= 30,
-};
-
-static void __init palmtx_kpc_init(void)
-{
-	pxa_set_keypad_info(&palmtx_keypad_platform_data);
-}
-#else
-static inline void palmtx_kpc_init(void) {}
-#endif
-
-/******************************************************************************
- * GPIO keys
- ******************************************************************************/
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-static struct gpio_keys_button palmtx_pxa_buttons[] = {
-	{KEY_F8, GPIO_NR_PALMTX_HOTSYNC_BUTTON_N, 1, "HotSync Button" },
-};
-
-static struct gpio_keys_platform_data palmtx_pxa_keys_data = {
-	.buttons	= palmtx_pxa_buttons,
-	.nbuttons	= ARRAY_SIZE(palmtx_pxa_buttons),
-};
-
-static struct platform_device palmtx_pxa_keys = {
-	.name	= "gpio-keys",
-	.id	= -1,
-	.dev	= {
-		.platform_data = &palmtx_pxa_keys_data,
-	},
-};
-
-static void __init palmtx_keys_init(void)
-{
-	platform_device_register(&palmtx_pxa_keys);
-}
-#else
-static inline void palmtx_keys_init(void) {}
-#endif
-
-/******************************************************************************
- * NAND Flash
- ******************************************************************************/
-#if defined(CONFIG_MTD_NAND_PLATFORM) || \
-	defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
-static void palmtx_nand_cmd_ctl(struct mtd_info *mtd, int cmd,
-				 unsigned int ctrl)
-{
-	struct nand_chip *this = mtd->priv;
-	char __iomem *nandaddr = this->IO_ADDR_W;
-
-	if (cmd == NAND_CMD_NONE)
-		return;
-
-	if (ctrl & NAND_CLE)
-		writeb(cmd, PALMTX_NAND_CLE_VIRT);
-	else if (ctrl & NAND_ALE)
-		writeb(cmd, PALMTX_NAND_ALE_VIRT);
-	else
-		writeb(cmd, nandaddr);
-}
-
-static struct mtd_partition palmtx_partition_info[] = {
-	[0] = {
-		.name	= "palmtx-0",
-		.offset	= 0,
-		.size	= MTDPART_SIZ_FULL
-	},
-};
-
-static const char *palmtx_part_probes[] = { "cmdlinepart", NULL };
-
-struct platform_nand_data palmtx_nand_platdata = {
-	.chip	= {
-		.nr_chips		= 1,
-		.chip_offset		= 0,
-		.nr_partitions		= ARRAY_SIZE(palmtx_partition_info),
-		.partitions		= palmtx_partition_info,
-		.chip_delay		= 20,
-		.part_probe_types 	= palmtx_part_probes,
-	},
-	.ctrl	= {
-		.cmd_ctrl	= palmtx_nand_cmd_ctl,
-	},
-};
-
-static struct resource palmtx_nand_resource[] = {
-	[0]	= {
-		.start	= PXA_CS1_PHYS,
-		.end	= PXA_CS1_PHYS + SZ_1M - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device palmtx_nand = {
-	.name		= "gen_nand",
-	.num_resources	= ARRAY_SIZE(palmtx_nand_resource),
-	.resource	= palmtx_nand_resource,
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &palmtx_nand_platdata,
-	}
-};
-
-static void __init palmtx_nand_init(void)
-{
-	platform_device_register(&palmtx_nand);
-}
-#else
-static inline void palmtx_nand_init(void) {}
-#endif
-
-/******************************************************************************
- * Machine init
- ******************************************************************************/
-static struct map_desc palmtx_io_desc[] __initdata = {
-{
-	.virtual	= (unsigned long)PALMTX_PCMCIA_VIRT,
-	.pfn		= __phys_to_pfn(PALMTX_PCMCIA_PHYS),
-	.length		= PALMTX_PCMCIA_SIZE,
-	.type		= MT_DEVICE,
-}, {
-	.virtual	= (unsigned long)PALMTX_NAND_ALE_VIRT,
-	.pfn		= __phys_to_pfn(PALMTX_NAND_ALE_PHYS),
-	.length		= SZ_1M,
-	.type		= MT_DEVICE,
-}, {
-	.virtual	= (unsigned long)PALMTX_NAND_CLE_VIRT,
-	.pfn		= __phys_to_pfn(PALMTX_NAND_CLE_PHYS),
-	.length		= SZ_1M,
-	.type		= MT_DEVICE,
-}
-};
-
-static void __init palmtx_map_io(void)
-{
-	pxa27x_map_io();
-	iotable_init(palmtx_io_desc, ARRAY_SIZE(palmtx_io_desc));
-}
-
-static void __init palmtx_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(palmtx_pin_config));
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	palm27x_mmc_init(GPIO_NR_PALMTX_SD_DETECT_N, GPIO_NR_PALMTX_SD_READONLY,
-			GPIO_NR_PALMTX_SD_POWER, 0);
-	palm27x_pm_init(PALMTX_STR_BASE);
-	palm27x_lcd_init(-1, &palm_320x480_lcd_mode);
-	palm27x_udc_init(GPIO_NR_PALMTX_USB_DETECT_N,
-			GPIO_NR_PALMTX_USB_PULLUP, 1);
-	palm27x_irda_init(GPIO_NR_PALMTX_IR_DISABLE);
-	palm27x_ac97_init(PALMTX_BAT_MIN_VOLTAGE, PALMTX_BAT_MAX_VOLTAGE,
-			GPIO_NR_PALMTX_EARPHONE_DETECT, 95);
-	palm27x_pwm_init(GPIO_NR_PALMTX_BL_POWER, GPIO_NR_PALMTX_LCD_POWER);
-	palm27x_power_init(GPIO_NR_PALMTX_POWER_DETECT, -1);
-	palm27x_pmic_init();
-	palmtx_kpc_init();
-	palmtx_keys_init();
-	palmtx_nor_init();
-	palmtx_nand_init();
-}
-
-MACHINE_START(PALMTX, "Palm T|X")
-	.atag_offset	= 0x100,
-	.map_io		= palmtx_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa27x_init_irq,
-	.handle_irq	= pxa27x_handle_irq,
-	.timer		= &pxa_timer,
-	.init_machine	= palmtx_init,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/palmz72.c b/ANDROID_3.4.5/arch/arm/mach-pxa/palmz72.c
deleted file mode 100644
index a97b5996..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/palmz72.c
+++ /dev/null
@@ -1,410 +0,0 @@
-/*
- * Hardware definitions for Palm Zire72
- *
- * Authors:
- *	Vladimir "Farcaller" Pouzanov <farcaller@gmail.com>
- *	Sergey Lapin <slapin@ossfans.org>
- *	Alex Osborne <bobofdoom@gmail.com>
- *	Jan Herman <2hp@seznam.cz>
- *
- * Rewrite for mainline:
- *	Marek Vasut <marek.vasut@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * (find more info at www.hackndev.com)
- *
- */
-
-#include <linux/platform_device.h>
-#include <linux/syscore_ops.h>
-#include <linux/delay.h>
-#include <linux/irq.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/pda_power.h>
-#include <linux/pwm_backlight.h>
-#include <linux/gpio.h>
-#include <linux/wm97xx.h>
-#include <linux/power_supply.h>
-#include <linux/usb/gpio_vbus.h>
-#include <linux/i2c-gpio.h>
-
-#include <asm/mach-types.h>
-#include <asm/suspend.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <mach/pxa27x.h>
-#include <mach/audio.h>
-#include <mach/palmz72.h>
-#include <mach/mmc.h>
-#include <mach/pxafb.h>
-#include <mach/irda.h>
-#include <plat/pxa27x_keypad.h>
-#include <mach/udc.h>
-#include <mach/palmasoc.h>
-#include <mach/palm27x.h>
-
-#include <mach/pm.h>
-#include <mach/camera.h>
-
-#include <media/soc_camera.h>
-
-#include "generic.h"
-#include "devices.h"
-
-/******************************************************************************
- * Pin configuration
- ******************************************************************************/
-static unsigned long palmz72_pin_config[] __initdata = {
-	/* MMC */
-	GPIO32_MMC_CLK,
-	GPIO92_MMC_DAT_0,
-	GPIO109_MMC_DAT_1,
-	GPIO110_MMC_DAT_2,
-	GPIO111_MMC_DAT_3,
-	GPIO112_MMC_CMD,
-	GPIO14_GPIO,	/* SD detect */
-	GPIO115_GPIO,	/* SD RO */
-	GPIO98_GPIO,	/* SD power */
-
-	/* AC97 */
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-	GPIO89_AC97_SYSCLK,
-	GPIO113_AC97_nRESET,
-
-	/* IrDA */
-	GPIO49_GPIO,	/* ir disable */
-	GPIO46_FICP_RXD,
-	GPIO47_FICP_TXD,
-
-	/* PWM */
-	GPIO16_PWM0_OUT,
-
-	/* USB */
-	GPIO15_GPIO,	/* usb detect */
-	GPIO95_GPIO,	/* usb pullup */
-
-	/* Matrix keypad */
-	GPIO100_KP_MKIN_0	| WAKEUP_ON_LEVEL_HIGH,
-	GPIO101_KP_MKIN_1	| WAKEUP_ON_LEVEL_HIGH,
-	GPIO102_KP_MKIN_2	| WAKEUP_ON_LEVEL_HIGH,
-	GPIO97_KP_MKIN_3	| WAKEUP_ON_LEVEL_HIGH,
-	GPIO103_KP_MKOUT_0,
-	GPIO104_KP_MKOUT_1,
-	GPIO105_KP_MKOUT_2,
-
-	/* LCD */
-	GPIOxx_LCD_TFT_16BPP,
-
-	GPIO20_GPIO,	/* bl power */
-	GPIO21_GPIO,	/* LCD border switch */
-	GPIO22_GPIO,	/* LCD border color */
-	GPIO96_GPIO,	/* lcd power */
-
-	/* PXA Camera */
-	GPIO81_CIF_DD_0,
-	GPIO48_CIF_DD_5,
-	GPIO50_CIF_DD_3,
-	GPIO51_CIF_DD_2,
-	GPIO52_CIF_DD_4,
-	GPIO53_CIF_MCLK,
-	GPIO54_CIF_PCLK,
-	GPIO55_CIF_DD_1,
-	GPIO84_CIF_FV,
-	GPIO85_CIF_LV,
-	GPIO93_CIF_DD_6,
-	GPIO108_CIF_DD_7,
-
-	GPIO56_GPIO,	/* OV9640 Powerdown */
-	GPIO57_GPIO,	/* OV9640 Reset */
-	GPIO91_GPIO,	/* OV9640 Power */
-
-	/* I2C */
-	GPIO117_GPIO,	/* I2C_SCL */
-	GPIO118_GPIO,	/* I2C_SDA */
-
-	/* Misc. */
-	GPIO0_GPIO	| WAKEUP_ON_LEVEL_HIGH,	/* power detect */
-	GPIO88_GPIO,				/* green led */
-	GPIO27_GPIO,				/* WM9712 IRQ */
-};
-
-/******************************************************************************
- * GPIO keyboard
- ******************************************************************************/
-#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
-static unsigned int palmz72_matrix_keys[] = {
-	KEY(0, 0, KEY_POWER),
-	KEY(0, 1, KEY_F1),
-	KEY(0, 2, KEY_ENTER),
-
-	KEY(1, 0, KEY_F2),
-	KEY(1, 1, KEY_F3),
-	KEY(1, 2, KEY_F4),
-
-	KEY(2, 0, KEY_UP),
-	KEY(2, 2, KEY_DOWN),
-
-	KEY(3, 0, KEY_RIGHT),
-	KEY(3, 2, KEY_LEFT),
-};
-
-static struct pxa27x_keypad_platform_data palmz72_keypad_platform_data = {
-	.matrix_key_rows	= 4,
-	.matrix_key_cols	= 3,
-	.matrix_key_map		= palmz72_matrix_keys,
-	.matrix_key_map_size	= ARRAY_SIZE(palmz72_matrix_keys),
-
-	.debounce_interval	= 30,
-};
-
-static void __init palmz72_kpc_init(void)
-{
-	pxa_set_keypad_info(&palmz72_keypad_platform_data);
-}
-#else
-static inline void palmz72_kpc_init(void) {}
-#endif
-
-/******************************************************************************
- * LEDs
- ******************************************************************************/
-#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
-static struct gpio_led gpio_leds[] = {
-	{
-		.name			= "palmz72:green:led",
-		.default_trigger	= "none",
-		.gpio			= GPIO_NR_PALMZ72_LED_GREEN,
-	},
-};
-
-static struct gpio_led_platform_data gpio_led_info = {
-	.leds		= gpio_leds,
-	.num_leds	= ARRAY_SIZE(gpio_leds),
-};
-
-static struct platform_device palmz72_leds = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &gpio_led_info,
-	}
-};
-
-static void __init palmz72_leds_init(void)
-{
-	platform_device_register(&palmz72_leds);
-}
-#else
-static inline void palmz72_leds_init(void) {}
-#endif
-
-#ifdef CONFIG_PM
-
-/* We have some black magic here
- * PalmOS ROM on recover expects special struct physical address
- * to be transferred via PSPR. Using this struct PalmOS restores
- * its state after sleep. As for Linux, we need to setup it the
- * same way. More than that, PalmOS ROM changes some values in memory.
- * For now only one location is found, which needs special treatment.
- * Thanks to Alex Osborne, Andrzej Zaborowski, and lots of other people
- * for reading backtraces for me :)
- */
-
-#define PALMZ72_SAVE_DWORD ((unsigned long *)0xc0000050)
-
-static struct palmz72_resume_info palmz72_resume_info = {
-	.magic0 = 0xb4e6,
-	.magic1 = 1,
-
-	/* reset state, MMU off etc */
-	.arm_control = 0,
-	.aux_control = 0,
-	.ttb = 0,
-	.domain_access = 0,
-	.process_id = 0,
-};
-
-static unsigned long store_ptr;
-
-/* syscore_ops for Palm Zire 72 PM */
-
-static int palmz72_pm_suspend(void)
-{
-	/* setup the resume_info struct for the original bootloader */
-	palmz72_resume_info.resume_addr = (u32) cpu_resume;
-
-	/* Storing memory touched by ROM */
-	store_ptr = *PALMZ72_SAVE_DWORD;
-
-	/* Setting PSPR to a proper value */
-	PSPR = virt_to_phys(&palmz72_resume_info);
-
-	return 0;
-}
-
-static void palmz72_pm_resume(void)
-{
-	*PALMZ72_SAVE_DWORD = store_ptr;
-}
-
-static struct syscore_ops palmz72_pm_syscore_ops = {
-	.suspend = palmz72_pm_suspend,
-	.resume = palmz72_pm_resume,
-};
-
-static int __init palmz72_pm_init(void)
-{
-	if (machine_is_palmz72()) {
-		register_syscore_ops(&palmz72_pm_syscore_ops);
-		return 0;
-	}
-	return -ENODEV;
-}
-
-device_initcall(palmz72_pm_init);
-#endif
-
-/******************************************************************************
- * SoC Camera
- ******************************************************************************/
-#if defined(CONFIG_SOC_CAMERA_OV9640) || \
-	defined(CONFIG_SOC_CAMERA_OV9640_MODULE)
-static struct pxacamera_platform_data palmz72_pxacamera_platform_data = {
-	.flags		= PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 |
-			PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN,
-	.mclk_10khz	= 2600,
-};
-
-/* Board I2C devices. */
-static struct i2c_board_info palmz72_i2c_device[] = {
-	{
-		I2C_BOARD_INFO("ov9640", 0x30),
-	}
-};
-
-static int palmz72_camera_power(struct device *dev, int power)
-{
-	gpio_set_value(GPIO_NR_PALMZ72_CAM_PWDN, !power);
-	mdelay(50);
-	return 0;
-}
-
-static int palmz72_camera_reset(struct device *dev)
-{
-	gpio_set_value(GPIO_NR_PALMZ72_CAM_RESET, 1);
-	mdelay(50);
-	gpio_set_value(GPIO_NR_PALMZ72_CAM_RESET, 0);
-	mdelay(50);
-	return 0;
-}
-
-static struct soc_camera_link palmz72_iclink = {
-	.bus_id		= 0, /* Match id in pxa27x_device_camera in device.c */
-	.board_info	= &palmz72_i2c_device[0],
-	.i2c_adapter_id	= 0,
-	.module_name	= "ov96xx",
-	.power		= &palmz72_camera_power,
-	.reset		= &palmz72_camera_reset,
-	.flags		= SOCAM_DATAWIDTH_8,
-};
-
-static struct i2c_gpio_platform_data palmz72_i2c_bus_data = {
-	.sda_pin	= 118,
-	.scl_pin	= 117,
-	.udelay		= 10,
-	.timeout	= 100,
-};
-
-static struct platform_device palmz72_i2c_bus_device = {
-	.name		= "i2c-gpio",
-	.id		= 0, /* we use this as a replacement for i2c-pxa */
-	.dev		= {
-		.platform_data	= &palmz72_i2c_bus_data,
-	}
-};
-
-static struct platform_device palmz72_camera = {
-	.name	= "soc-camera-pdrv",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &palmz72_iclink,
-	},
-};
-
-/* Here we request the camera GPIOs and configure them. We power up the camera
- * module, deassert the reset pin, but put it into powerdown (low to no power
- * consumption) mode. This allows us to later bring the module up fast. */
-static struct gpio palmz72_camera_gpios[] = {
-	{ GPIO_NR_PALMZ72_CAM_POWER,	GPIOF_INIT_HIGH,"Camera DVDD" },
-	{ GPIO_NR_PALMZ72_CAM_RESET,	GPIOF_INIT_LOW,	"Camera RESET" },
-	{ GPIO_NR_PALMZ72_CAM_PWDN,	GPIOF_INIT_LOW,	"Camera PWDN" },
-};
-
-static inline void __init palmz72_cam_gpio_init(void)
-{
-	int ret;
-
-	ret = gpio_request_array(ARRAY_AND_SIZE(palmz72_camera_gpios));
-	if (!ret)
-		gpio_free_array(ARRAY_AND_SIZE(palmz72_camera_gpios));
-	else
-		printk(KERN_ERR "Camera GPIO init failed!\n");
-
-	return;
-}
-
-static void __init palmz72_camera_init(void)
-{
-	palmz72_cam_gpio_init();
-	pxa_set_camera_info(&palmz72_pxacamera_platform_data);
-	platform_device_register(&palmz72_i2c_bus_device);
-	platform_device_register(&palmz72_camera);
-}
-#else
-static inline void palmz72_camera_init(void) {}
-#endif
-
-/******************************************************************************
- * Machine init
- ******************************************************************************/
-static void __init palmz72_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(palmz72_pin_config));
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	palm27x_mmc_init(GPIO_NR_PALMZ72_SD_DETECT_N, GPIO_NR_PALMZ72_SD_RO,
-			GPIO_NR_PALMZ72_SD_POWER_N, 1);
-	palm27x_lcd_init(-1, &palm_320x320_lcd_mode);
-	palm27x_udc_init(GPIO_NR_PALMZ72_USB_DETECT_N,
-			GPIO_NR_PALMZ72_USB_PULLUP, 0);
-	palm27x_irda_init(GPIO_NR_PALMZ72_IR_DISABLE);
-	palm27x_ac97_init(PALMZ72_BAT_MIN_VOLTAGE, PALMZ72_BAT_MAX_VOLTAGE,
-			-1, 113);
-	palm27x_pwm_init(-1, -1);
-	palm27x_power_init(-1, -1);
-	palm27x_pmic_init();
-	palmz72_kpc_init();
-	palmz72_leds_init();
-	palmz72_camera_init();
-}
-
-MACHINE_START(PALMZ72, "Palm Zire72")
-	.atag_offset	= 0x100,
-	.map_io		= pxa27x_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa27x_init_irq,
-	.handle_irq	= pxa27x_handle_irq,
-	.timer		= &pxa_timer,
-	.init_machine	= palmz72_init,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/pcm027.c b/ANDROID_3.4.5/arch/arm/mach-pxa/pcm027.c
deleted file mode 100644
index fe905443..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/pcm027.c
+++ /dev/null
@@ -1,269 +0,0 @@
-/*
- *  linux/arch/arm/mach-pxa/pcm027.c
- *  Support for the Phytec phyCORE-PXA270 CPU card (aka PCM-027).
- *
- *  Refer
- *   http://www.phytec.com/products/sbc/ARM-XScale/phyCORE-XScale-PXA270.html
- *  for additional hardware info
- *
- *  Author:	Juergen Kilb
- *  Created:	April 05, 2005
- *  Copyright:	Phytec Messtechnik GmbH
- *  e-Mail:	armlinux@phytec.de
- *
- *  based on Intel Mainstone Board
- *
- *  Copyright 2007 Juergen Beisert @ Pengutronix (j.beisert@pengutronix.de)
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#include <linux/irq.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/max7301.h>
-#include <linux/spi/pxa2xx_spi.h>
-#include <linux/leds.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/pxa27x.h>
-#include <mach/pcm027.h>
-#include "generic.h"
-
-/*
- * ABSTRACT:
- *
- * The PXA270 processor comes with a bunch of hardware on its silicon.
- * Not all of this hardware can be used at the same time and not all
- * is routed to module's connectors. Also it depends on the baseboard, what
- * kind of hardware can be used in which way.
- * -> So this file supports the main devices on the CPU card only!
- * Refer pcm990-baseboard.c how to extend this features to get a full
- * blown system with many common interfaces.
- *
- * The PCM-027 supports the following interfaces through its connectors and
- * will be used in pcm990-baseboard.c:
- *
- * - LCD support
- * - MMC support
- * - IDE/CF card
- * - FFUART
- * - BTUART
- * - IRUART
- * - AC97
- * - SSP
- * - SSP3
- *
- * Claimed GPIOs:
- * GPIO0 -> IRQ input from RTC
- * GPIO2 -> SYS_ENA*)
- * GPIO3 -> PWR_SCL
- * GPIO4 -> PWR_SDA
- * GPIO5 -> PowerCap0*)
- * GPIO6 -> PowerCap1*)
- * GPIO7 -> PowerCap2*)
- * GPIO8 -> PowerCap3*)
- * GPIO15 -> /CS1
- * GPIO20 -> /CS2
- * GPIO21 -> /CS3
- * GPIO33 -> /CS5 network controller select
- * GPIO52 -> IRQ from network controller
- * GPIO78 -> /CS2
- * GPIO80 -> /CS4
- * GPIO90 -> LED0
- * GPIO91 -> LED1
- * GPIO114 -> IRQ from CAN controller
- * GPIO117 -> SCL
- * GPIO118 -> SDA
- *
- * *) CPU internal use only
- */
-
-static unsigned long pcm027_pin_config[] __initdata = {
-	/* Chip Selects */
-	GPIO20_nSDCS_2,
-	GPIO21_nSDCS_3,
-	GPIO15_nCS_1,
-	GPIO78_nCS_2,
-	GPIO80_nCS_4,
-	GPIO33_nCS_5,	/* Ethernet */
-
-	/* I2C */
-	GPIO117_I2C_SCL,
-	GPIO118_I2C_SDA,
-
-	/* GPIO */
-	GPIO52_GPIO,	/* IRQ from network controller */
-#ifdef CONFIG_LEDS_GPIO
-	GPIO90_GPIO,	/* PCM027_LED_CPU */
-	GPIO91_GPIO,	/* PCM027_LED_HEART_BEAT */
-#endif
-	GPIO114_GPIO,	/* IRQ from CAN controller */
-};
-
-/*
- * SMC91x network controller specific stuff
- */
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.start	= PCM027_ETH_PHYS + 0x300,
-		.end	= PCM027_ETH_PHYS + PCM027_ETH_SIZE,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= PCM027_ETH_IRQ,
-		.end	= PCM027_ETH_IRQ,
-		/* note: smc91x's driver doesn't use the trigger bits yet */
-		.flags	= IORESOURCE_IRQ | PCM027_ETH_IRQ_EDGE,
-	}
-};
-
-static struct platform_device smc91x_device = {
-	.name		= "smc91x",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(smc91x_resources),
-	.resource	= smc91x_resources,
-};
-
-/*
- * SPI host and devices
- */
-static struct pxa2xx_spi_master pxa_ssp_master_info = {
-	.num_chipselect	= 1,
-};
-
-static struct max7301_platform_data max7301_info = {
-	.base = -1,
-};
-
-/* bus_num must match id in pxa2xx_set_spi_info() call */
-static struct spi_board_info spi_board_info[] __initdata = {
-	{
-		.modalias	= "max7301",
-		.platform_data	= &max7301_info,
-		.max_speed_hz	= 13000000,
-		.bus_num	= 1,
-		.chip_select	= 0,
-		.mode		= SPI_MODE_0,
-	},
-};
-
-/*
- * NOR flash
- */
-static struct physmap_flash_data pcm027_flash_data = {
-	.width  = 4,
-};
-
-static struct resource pcm027_flash_resource = {
-	.start          = PCM027_FLASH_PHYS,
-	.end            = PCM027_FLASH_PHYS + PCM027_FLASH_SIZE - 1 ,
-	.flags          = IORESOURCE_MEM,
-};
-
-static struct platform_device pcm027_flash = {
-	.name           = "physmap-flash",
-	.id             = 0,
-	.dev            = {
-		.platform_data  = &pcm027_flash_data,
-	},
-	.resource       = &pcm027_flash_resource,
-	.num_resources  = 1,
-};
-
-#ifdef CONFIG_LEDS_GPIO
-
-static struct gpio_led pcm027_led[] = {
-	{
-		.name = "led0:red",	/* FIXME */
-		.gpio = PCM027_LED_CPU
-	},
-	{
-		.name = "led1:green",	/* FIXME */
-		.gpio = PCM027_LED_HEARD_BEAT
-	},
-};
-
-static struct gpio_led_platform_data pcm027_led_data = {
-	.num_leds	= ARRAY_SIZE(pcm027_led),
-	.leds		= pcm027_led
-};
-
-static struct platform_device pcm027_led_dev = {
-	.name		= "leds-gpio",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &pcm027_led_data,
-	},
-};
-
-#endif /* CONFIG_LEDS_GPIO */
-
-/*
- * declare the available device resources on this board
- */
-static struct platform_device *devices[] __initdata = {
-	&smc91x_device,
-	&pcm027_flash,
-#ifdef CONFIG_LEDS_GPIO
-	&pcm027_led_dev
-#endif
-};
-
-/*
- * pcm027_init - breath some life into the board
- */
-static void __init pcm027_init(void)
-{
-	/* system bus arbiter setting
-	 * - Core_Park
-	 * - LCD_wt:DMA_wt:CORE_Wt = 2:3:4
-	 */
-	ARB_CNTRL = ARB_CORE_PARK | 0x234;
-
-	pxa2xx_mfp_config(pcm027_pin_config, ARRAY_SIZE(pcm027_pin_config));
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-
-	/* at last call the baseboard to initialize itself */
-#ifdef CONFIG_MACH_PCM990_BASEBOARD
-	pcm990_baseboard_init();
-#endif
-
-	pxa2xx_set_spi_info(1, &pxa_ssp_master_info);
-	spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
-}
-
-static void __init pcm027_map_io(void)
-{
-	pxa27x_map_io();
-
-	/* initialize sleep mode regs (wake-up sources, etc) */
-	PGSR0 = 0x01308000;
-	PGSR1 = 0x00CF0002;
-	PGSR2 = 0x0E294000;
-	PGSR3 = 0x0000C000;
-	PWER  = 0x40000000 | PWER_GPIO0 | PWER_GPIO1;
-	PRER  = 0x00000000;
-	PFER  = 0x00000003;
-}
-
-MACHINE_START(PCM027, "Phytec Messtechnik GmbH phyCORE-PXA270")
-	/* Maintainer: Pengutronix */
-	.atag_offset	= 0x100,
-	.map_io		= pcm027_map_io,
-	.nr_irqs	= PCM027_NR_IRQS,
-	.init_irq	= pxa27x_init_irq,
-	.handle_irq	= pxa27x_handle_irq,
-	.timer		= &pxa_timer,
-	.init_machine	= pcm027_init,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/pcm990-baseboard.c b/ANDROID_3.4.5/arch/arm/mach-pxa/pcm990-baseboard.c
deleted file mode 100644
index abab4e2b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/pcm990-baseboard.c
+++ /dev/null
@@ -1,541 +0,0 @@
-/*
- *  arch/arm/mach-pxa/pcm990-baseboard.c
- *  Support for the Phytec phyCORE-PXA270 Development Platform (PCM-990).
- *
- *  Refer
- *   http://www.phytec.com/products/rdk/ARM-XScale/phyCORE-XScale-PXA270.html
- *  for additional hardware info
- *
- *  Author:	Juergen Kilb
- *  Created:	April 05, 2005
- *  Copyright:	Phytec Messtechnik GmbH
- *  e-Mail:	armlinux@phytec.de
- *
- *  based on Intel Mainstone Board
- *
- *  Copyright 2007 Juergen Beisert @ Pengutronix (j.beisert@pengutronix.de)
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-#include <linux/gpio.h>
-#include <linux/irq.h>
-#include <linux/platform_device.h>
-#include <linux/i2c.h>
-#include <linux/i2c/pxa-i2c.h>
-#include <linux/pwm_backlight.h>
-
-#include <media/soc_camera.h>
-
-#include <mach/camera.h>
-#include <asm/mach/map.h>
-#include <mach/pxa27x.h>
-#include <mach/audio.h>
-#include <mach/mmc.h>
-#include <mach/ohci.h>
-#include <mach/pcm990_baseboard.h>
-#include <mach/pxafb.h>
-
-#include "devices.h"
-#include "generic.h"
-
-static unsigned long pcm990_pin_config[] __initdata = {
-	/* MMC */
-	GPIO32_MMC_CLK,
-	GPIO112_MMC_CMD,
-	GPIO92_MMC_DAT_0,
-	GPIO109_MMC_DAT_1,
-	GPIO110_MMC_DAT_2,
-	GPIO111_MMC_DAT_3,
-	/* USB */
-	GPIO88_USBH1_PWR,
-	GPIO89_USBH1_PEN,
-	/* PWM0 */
-	GPIO16_PWM0_OUT,
-
-	/* I2C */
-	GPIO117_I2C_SCL,
-	GPIO118_I2C_SDA,
-
-	/* AC97 */
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-};
-
-/*
- * pcm990_lcd_power - control power supply to the LCD
- * @on: 0 = switch off, 1 = switch on
- *
- * Called by the pxafb driver
- */
-#ifndef CONFIG_PCM990_DISPLAY_NONE
-static void pcm990_lcd_power(int on, struct fb_var_screeninfo *var)
-{
-	if (on) {
-		/* enable LCD-Latches
-		 * power on LCD
-		 */
-		__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG3) =
-			PCM990_CTRL_LCDPWR + PCM990_CTRL_LCDON;
-	} else {
-		/* disable LCD-Latches
-		 * power off LCD
-		 */
-		__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG3) = 0x00;
-	}
-}
-#endif
-
-#if defined(CONFIG_PCM990_DISPLAY_SHARP)
-static struct pxafb_mode_info fb_info_sharp_lq084v1dg21 = {
-	.pixclock		= 28000,
-	.xres			= 640,
-	.yres			= 480,
-	.bpp			= 16,
-	.hsync_len		= 20,
-	.left_margin		= 103,
-	.right_margin		= 47,
-	.vsync_len		= 6,
-	.upper_margin		= 28,
-	.lower_margin		= 5,
-	.sync			= 0,
-	.cmap_greyscale		= 0,
-};
-
-static struct pxafb_mach_info pcm990_fbinfo __initdata = {
-	.modes			= &fb_info_sharp_lq084v1dg21,
-	.num_modes		= 1,
-	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
-	.pxafb_lcd_power	= pcm990_lcd_power,
-};
-#elif defined(CONFIG_PCM990_DISPLAY_NEC)
-struct pxafb_mode_info fb_info_nec_nl6448bc20_18d = {
-	.pixclock		= 39720,
-	.xres			= 640,
-	.yres			= 480,
-	.bpp			= 16,
-	.hsync_len		= 32,
-	.left_margin		= 16,
-	.right_margin		= 48,
-	.vsync_len		= 2,
-	.upper_margin		= 12,
-	.lower_margin		= 17,
-	.sync			= 0,
-	.cmap_greyscale		= 0,
-};
-
-static struct pxafb_mach_info pcm990_fbinfo __initdata = {
-	.modes			= &fb_info_nec_nl6448bc20_18d,
-	.num_modes		= 1,
-	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
-	.pxafb_lcd_power	= pcm990_lcd_power,
-};
-#endif
-
-static struct platform_pwm_backlight_data pcm990_backlight_data = {
-	.pwm_id		= 0,
-	.max_brightness	= 1023,
-	.dft_brightness	= 1023,
-	.pwm_period_ns	= 78770,
-};
-
-static struct platform_device pcm990_backlight_device = {
-	.name		= "pwm-backlight",
-	.dev		= {
-		.parent = &pxa27x_device_pwm0.dev,
-		.platform_data = &pcm990_backlight_data,
-	},
-};
-
-/*
- * The PCM-990 development baseboard uses PCM-027's hardware in the
- * following way:
- *
- * - LCD support is in use
- *  - GPIO16 is output for back light on/off with PWM
- *  - GPIO58 ... GPIO73 are outputs for display data
- *  - GPIO74 is output output for LCDFCLK
- *  - GPIO75 is output for LCDLCLK
- *  - GPIO76 is output for LCDPCLK
- *  - GPIO77 is output for LCDBIAS
- * - MMC support is in use
- *  - GPIO32 is output for MMCCLK
- *  - GPIO92 is MMDAT0
- *  - GPIO109 is MMDAT1
- *  - GPIO110 is MMCS0
- *  - GPIO111 is MMCS1
- *  - GPIO112 is MMCMD
- * - IDE/CF card is in use
- *  - GPIO48 is output /POE
- *  - GPIO49 is output /PWE
- *  - GPIO50 is output /PIOR
- *  - GPIO51 is output /PIOW
- *  - GPIO54 is output /PCE2
- *  - GPIO55 is output /PREG
- *  - GPIO56 is input /PWAIT
- *  - GPIO57 is output /PIOS16
- *  - GPIO79 is output PSKTSEL
- *  - GPIO85 is output /PCE1
- * - FFUART is in use
- *  - GPIO34 is input FFRXD
- *  - GPIO35 is input FFCTS
- *  - GPIO36 is input FFDCD
- *  - GPIO37 is input FFDSR
- *  - GPIO38 is input FFRI
- *  - GPIO39 is output FFTXD
- *  - GPIO40 is output FFDTR
- *  - GPIO41 is output FFRTS
- * - BTUART is in use
- *  - GPIO42 is input BTRXD
- *  - GPIO43 is output BTTXD
- *  - GPIO44 is input BTCTS
- *  - GPIO45 is output BTRTS
- * - IRUART is in use
- *  - GPIO46 is input STDRXD
- *  - GPIO47 is output STDTXD
- * - AC97 is in use*)
- *  - GPIO28 is input AC97CLK
- *  - GPIO29 is input AC97DatIn
- *  - GPIO30 is output AC97DatO
- *  - GPIO31 is output AC97SYNC
- *  - GPIO113 is output AC97_RESET
- * - SSP is in use
- *  - GPIO23 is output SSPSCLK
- *  - GPIO24 is output chip select to Max7301
- *  - GPIO25 is output SSPTXD
- *  - GPIO26 is input SSPRXD
- *  - GPIO27 is input for Max7301 IRQ
- *  - GPIO53 is input SSPSYSCLK
- * - SSP3 is in use
- *  - GPIO81 is output SSPTXD3
- *  - GPIO82 is input SSPRXD3
- *  - GPIO83 is output SSPSFRM
- *  - GPIO84 is output SSPCLK3
- *
- * Otherwise claimed GPIOs:
- * GPIO1 -> IRQ from user switch
- * GPIO9 -> IRQ from power management
- * GPIO10 -> IRQ from WML9712 AC97 controller
- * GPIO11 -> IRQ from IDE controller
- * GPIO12 -> IRQ from CF controller
- * GPIO13 -> IRQ from CF controller
- * GPIO14 -> GPIO free
- * GPIO15 -> /CS1 selects baseboard's Control CPLD (U7, 16 bit wide data path)
- * GPIO19 -> GPIO free
- * GPIO20 -> /SDCS2
- * GPIO21 -> /CS3 PC card socket select
- * GPIO33 -> /CS5  network controller select
- * GPIO78 -> /CS2  (16 bit wide data path)
- * GPIO80 -> /CS4  (16 bit wide data path)
- * GPIO86 -> GPIO free
- * GPIO87 -> GPIO free
- * GPIO90 -> LED0 on CPU module
- * GPIO91 -> LED1 on CPI module
- * GPIO117 -> SCL
- * GPIO118 -> SDA
- */
-
-static unsigned long pcm990_irq_enabled;
-
-static void pcm990_mask_ack_irq(struct irq_data *d)
-{
-	int pcm990_irq = (d->irq - PCM027_IRQ(0));
-	PCM990_INTMSKENA = (pcm990_irq_enabled &= ~(1 << pcm990_irq));
-}
-
-static void pcm990_unmask_irq(struct irq_data *d)
-{
-	int pcm990_irq = (d->irq - PCM027_IRQ(0));
-	/* the irq can be acknowledged only if deasserted, so it's done here */
-	PCM990_INTSETCLR |= 1 << pcm990_irq;
-	PCM990_INTMSKENA  = (pcm990_irq_enabled |= (1 << pcm990_irq));
-}
-
-static struct irq_chip pcm990_irq_chip = {
-	.irq_mask_ack	= pcm990_mask_ack_irq,
-	.irq_unmask	= pcm990_unmask_irq,
-};
-
-static void pcm990_irq_handler(unsigned int irq, struct irq_desc *desc)
-{
-	unsigned long pending = (~PCM990_INTSETCLR) & pcm990_irq_enabled;
-
-	do {
-		/* clear our parent IRQ */
-		desc->irq_data.chip->irq_ack(&desc->irq_data);
-		if (likely(pending)) {
-			irq = PCM027_IRQ(0) + __ffs(pending);
-			generic_handle_irq(irq);
-		}
-		pending = (~PCM990_INTSETCLR) & pcm990_irq_enabled;
-	} while (pending);
-}
-
-static void __init pcm990_init_irq(void)
-{
-	int irq;
-
-	/* setup extra PCM990 irqs */
-	for (irq = PCM027_IRQ(0); irq <= PCM027_IRQ(3); irq++) {
-		irq_set_chip_and_handler(irq, &pcm990_irq_chip,
-					 handle_level_irq);
-		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
-	}
-
-	PCM990_INTMSKENA = 0x00;	/* disable all Interrupts */
-	PCM990_INTSETCLR = 0xFF;
-
-	irq_set_chained_handler(PCM990_CTRL_INT_IRQ, pcm990_irq_handler);
-	irq_set_irq_type(PCM990_CTRL_INT_IRQ, PCM990_CTRL_INT_IRQ_EDGE);
-}
-
-static int pcm990_mci_init(struct device *dev, irq_handler_t mci_detect_int,
-			void *data)
-{
-	int err;
-
-	err = request_irq(PCM027_MMCDET_IRQ, mci_detect_int, IRQF_DISABLED,
-			     "MMC card detect", data);
-	if (err)
-		printk(KERN_ERR "pcm990_mci_init: MMC/SD: can't request MMC "
-				"card detect IRQ\n");
-
-	return err;
-}
-
-static void pcm990_mci_setpower(struct device *dev, unsigned int vdd)
-{
-	struct pxamci_platform_data *p_d = dev->platform_data;
-
-	if ((1 << vdd) & p_d->ocr_mask)
-		__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG5) =
-						PCM990_CTRL_MMC2PWR;
-	else
-		__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG5) =
-						~PCM990_CTRL_MMC2PWR;
-}
-
-static void pcm990_mci_exit(struct device *dev, void *data)
-{
-	free_irq(PCM027_MMCDET_IRQ, data);
-}
-
-#define MSECS_PER_JIFFY (1000/HZ)
-
-static struct pxamci_platform_data pcm990_mci_platform_data = {
-	.detect_delay_ms	= 250,
-	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.init 			= pcm990_mci_init,
-	.setpower 		= pcm990_mci_setpower,
-	.exit			= pcm990_mci_exit,
-	.gpio_card_detect	= -1,
-	.gpio_card_ro		= -1,
-	.gpio_power		= -1,
-};
-
-static struct pxaohci_platform_data pcm990_ohci_platform_data = {
-	.port_mode	= PMM_PERPORT_MODE,
-	.flags		= ENABLE_PORT1 | POWER_CONTROL_LOW | POWER_SENSE_LOW,
-	.power_on_delay	= 10,
-};
-
-/*
- * PXA27x Camera specific stuff
- */
-#if defined(CONFIG_VIDEO_PXA27x) || defined(CONFIG_VIDEO_PXA27x_MODULE)
-static unsigned long pcm990_camera_pin_config[] = {
-	/* CIF */
-	GPIO98_CIF_DD_0,
-	GPIO105_CIF_DD_1,
-	GPIO104_CIF_DD_2,
-	GPIO103_CIF_DD_3,
-	GPIO95_CIF_DD_4,
-	GPIO94_CIF_DD_5,
-	GPIO93_CIF_DD_6,
-	GPIO108_CIF_DD_7,
-	GPIO107_CIF_DD_8,
-	GPIO106_CIF_DD_9,
-	GPIO42_CIF_MCLK,
-	GPIO45_CIF_PCLK,
-	GPIO43_CIF_FV,
-	GPIO44_CIF_LV,
-};
-
-/*
- * CICR4: PCLK_EN:	Pixel clock is supplied by the sensor
- *	MCLK_EN:	Master clock is generated by PXA
- *	PCP:		Data sampled on the falling edge of pixel clock
- */
-struct pxacamera_platform_data pcm990_pxacamera_platform_data = {
-	.flags  = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 | PXA_CAMERA_DATAWIDTH_10 |
-		PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN/* | PXA_CAMERA_PCP*/,
-	.mclk_10khz = 1000,
-};
-
-#include <linux/i2c/pca953x.h>
-
-static struct pca953x_platform_data pca9536_data = {
-	.gpio_base	= PXA_NR_BUILTIN_GPIO,
-};
-
-static int gpio_bus_switch = -EINVAL;
-
-static int pcm990_camera_set_bus_param(struct soc_camera_link *link,
-				       unsigned long flags)
-{
-	if (gpio_bus_switch < 0) {
-		if (flags == SOCAM_DATAWIDTH_10)
-			return 0;
-		else
-			return -EINVAL;
-	}
-
-	if (flags & SOCAM_DATAWIDTH_8)
-		gpio_set_value_cansleep(gpio_bus_switch, 1);
-	else
-		gpio_set_value_cansleep(gpio_bus_switch, 0);
-
-	return 0;
-}
-
-static unsigned long pcm990_camera_query_bus_param(struct soc_camera_link *link)
-{
-	int ret;
-
-	if (gpio_bus_switch < 0) {
-		ret = gpio_request(PXA_NR_BUILTIN_GPIO, "camera");
-		if (!ret) {
-			gpio_bus_switch = PXA_NR_BUILTIN_GPIO;
-			gpio_direction_output(gpio_bus_switch, 0);
-		}
-	}
-
-	if (gpio_bus_switch >= 0)
-		return SOCAM_DATAWIDTH_8 | SOCAM_DATAWIDTH_10;
-	else
-		return SOCAM_DATAWIDTH_10;
-}
-
-static void pcm990_camera_free_bus(struct soc_camera_link *link)
-{
-	if (gpio_bus_switch < 0)
-		return;
-
-	gpio_free(gpio_bus_switch);
-	gpio_bus_switch = -EINVAL;
-}
-
-/* Board I2C devices. */
-static struct i2c_board_info __initdata pcm990_i2c_devices[] = {
-	{
-		/* Must initialize before the camera(s) */
-		I2C_BOARD_INFO("pca9536", 0x41),
-		.platform_data = &pca9536_data,
-	},
-};
-
-static struct i2c_board_info pcm990_camera_i2c[] = {
-	{
-		I2C_BOARD_INFO("mt9v022", 0x48),
-	}, {
-		I2C_BOARD_INFO("mt9m001", 0x5d),
-	},
-};
-
-static struct soc_camera_link iclink[] = {
-	{
-		.bus_id			= 0, /* Must match with the camera ID */
-		.board_info		= &pcm990_camera_i2c[0],
-		.i2c_adapter_id		= 0,
-		.query_bus_param	= pcm990_camera_query_bus_param,
-		.set_bus_param		= pcm990_camera_set_bus_param,
-		.free_bus		= pcm990_camera_free_bus,
-	}, {
-		.bus_id			= 0, /* Must match with the camera ID */
-		.board_info		= &pcm990_camera_i2c[1],
-		.i2c_adapter_id		= 0,
-		.query_bus_param	= pcm990_camera_query_bus_param,
-		.set_bus_param		= pcm990_camera_set_bus_param,
-		.free_bus		= pcm990_camera_free_bus,
-	},
-};
-
-static struct platform_device pcm990_camera[] = {
-	{
-		.name	= "soc-camera-pdrv",
-		.id	= 0,
-		.dev	= {
-			.platform_data = &iclink[0],
-		},
-	}, {
-		.name	= "soc-camera-pdrv",
-		.id	= 1,
-		.dev	= {
-			.platform_data = &iclink[1],
-		},
-	},
-};
-#endif /* CONFIG_VIDEO_PXA27x ||CONFIG_VIDEO_PXA27x_MODULE */
-
-/*
- * enable generic access to the base board control CPLDs U6 and U7
- */
-static struct map_desc pcm990_io_desc[] __initdata = {
-	{
-		.virtual	= PCM990_CTRL_BASE,
-		.pfn		= __phys_to_pfn(PCM990_CTRL_PHYS),
-		.length		= PCM990_CTRL_SIZE,
-		.type		= MT_DEVICE	/* CPLD */
-	}, {
-		.virtual	= PCM990_CF_PLD_BASE,
-		.pfn		= __phys_to_pfn(PCM990_CF_PLD_PHYS),
-		.length		= PCM990_CF_PLD_SIZE,
-		.type		= MT_DEVICE	/* CPLD */
-	}
-};
-
-/*
- * system init for baseboard usage. Will be called by pcm027 init.
- *
- * Add platform devices present on this baseboard and init
- * them from CPU side as far as required to use them later on
- */
-void __init pcm990_baseboard_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(pcm990_pin_config));
-
-	/* register CPLD access */
-	iotable_init(ARRAY_AND_SIZE(pcm990_io_desc));
-
-	/* register CPLD's IRQ controller */
-	pcm990_init_irq();
-
-#ifndef CONFIG_PCM990_DISPLAY_NONE
-	pxa_set_fb_info(NULL, &pcm990_fbinfo);
-#endif
-	platform_device_register(&pcm990_backlight_device);
-
-	/* MMC */
-	pxa_set_mci_info(&pcm990_mci_platform_data);
-
-	/* USB host */
-	pxa_set_ohci_info(&pcm990_ohci_platform_data);
-
-	pxa_set_i2c_info(NULL);
-	pxa_set_ac97_info(NULL);
-
-#if defined(CONFIG_VIDEO_PXA27x) || defined(CONFIG_VIDEO_PXA27x_MODULE)
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(pcm990_camera_pin_config));
-	pxa_set_camera_info(&pcm990_pxacamera_platform_data);
-
-	i2c_register_board_info(0, ARRAY_AND_SIZE(pcm990_i2c_devices));
-
-	platform_device_register(&pcm990_camera[0]);
-	platform_device_register(&pcm990_camera[1]);
-#endif
-
-	printk(KERN_INFO "PCM-990 Evaluation baseboard initialized\n");
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/pm.c b/ANDROID_3.4.5/arch/arm/mach-pxa/pm.c
deleted file mode 100644
index 37178a85..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/pm.c
+++ /dev/null
@@ -1,118 +0,0 @@
-/*
- * PXA250/210 Power Management Routines
- *
- * Original code for the SA11x0:
- * Copyright (c) 2001 Cliff Brake <cbrake@accelent.com>
- *
- * Modified for the PXA250 by Nicolas Pitre:
- * Copyright (c) 2002 Monta Vista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License.
- */
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/suspend.h>
-#include <linux/errno.h>
-#include <linux/slab.h>
-
-#include <mach/pm.h>
-
-struct pxa_cpu_pm_fns *pxa_cpu_pm_fns;
-static unsigned long *sleep_save;
-
-int pxa_pm_enter(suspend_state_t state)
-{
-	unsigned long sleep_save_checksum = 0, checksum = 0;
-	int i;
-
-#ifdef CONFIG_IWMMXT
-	/* force any iWMMXt context to ram **/
-	if (elf_hwcap & HWCAP_IWMMXT)
-		iwmmxt_task_disable(NULL);
-#endif
-
-	/* skip registers saving for standby */
-	if (state != PM_SUSPEND_STANDBY && pxa_cpu_pm_fns->save) {
-		pxa_cpu_pm_fns->save(sleep_save);
-		/* before sleeping, calculate and save a checksum */
-		for (i = 0; i < pxa_cpu_pm_fns->save_count - 1; i++)
-			sleep_save_checksum += sleep_save[i];
-	}
-
-	/* *** go zzz *** */
-	pxa_cpu_pm_fns->enter(state);
-
-	if (state != PM_SUSPEND_STANDBY && pxa_cpu_pm_fns->restore) {
-		/* after sleeping, validate the checksum */
-		for (i = 0; i < pxa_cpu_pm_fns->save_count - 1; i++)
-			checksum += sleep_save[i];
-
-		/* if invalid, display message and wait for a hardware reset */
-		if (checksum != sleep_save_checksum) {
-
-			lubbock_set_hexled(0xbadbadc5);
-
-			while (1)
-				pxa_cpu_pm_fns->enter(state);
-		}
-		pxa_cpu_pm_fns->restore(sleep_save);
-	}
-
-	pr_debug("*** made it back from resume\n");
-
-	return 0;
-}
-
-EXPORT_SYMBOL_GPL(pxa_pm_enter);
-
-static int pxa_pm_valid(suspend_state_t state)
-{
-	if (pxa_cpu_pm_fns)
-		return pxa_cpu_pm_fns->valid(state);
-
-	return -EINVAL;
-}
-
-int pxa_pm_prepare(void)
-{
-	int ret = 0;
-
-	if (pxa_cpu_pm_fns && pxa_cpu_pm_fns->prepare)
-		ret = pxa_cpu_pm_fns->prepare();
-
-	return ret;
-}
-
-void pxa_pm_finish(void)
-{
-	if (pxa_cpu_pm_fns && pxa_cpu_pm_fns->finish)
-		pxa_cpu_pm_fns->finish();
-}
-
-static const struct platform_suspend_ops pxa_pm_ops = {
-	.valid		= pxa_pm_valid,
-	.enter		= pxa_pm_enter,
-	.prepare	= pxa_pm_prepare,
-	.finish		= pxa_pm_finish,
-};
-
-static int __init pxa_pm_init(void)
-{
-	if (!pxa_cpu_pm_fns) {
-		printk(KERN_ERR "no valid pxa_cpu_pm_fns defined\n");
-		return -EINVAL;
-	}
-
-	sleep_save = kmalloc(pxa_cpu_pm_fns->save_count * sizeof(unsigned long),
-			     GFP_KERNEL);
-	if (!sleep_save) {
-		printk(KERN_ERR "failed to alloc memory for pm save\n");
-		return -ENOMEM;
-	}
-
-	suspend_set_ops(&pxa_pm_ops);
-	return 0;
-}
-
-device_initcall(pxa_pm_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/poodle.c b/ANDROID_3.4.5/arch/arm/mach-pxa/poodle.c
deleted file mode 100644
index 89d98c83..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/poodle.c
+++ /dev/null
@@ -1,475 +0,0 @@
-/*
- * linux/arch/arm/mach-pxa/poodle.c
- *
- *  Support for the SHARP Poodle Board.
- *
- * Based on:
- *  linux/arch/arm/mach-pxa/lubbock.c Author:	Nicolas Pitre
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- *
- * Change Log
- *  12-Dec-2002 Sharp Corporation for Poodle
- *  John Lenz <lenz@cs.wisc.edu> updates to 2.6
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/export.h>
-#include <linux/platform_device.h>
-#include <linux/fb.h>
-#include <linux/pm.h>
-#include <linux/delay.h>
-#include <linux/mtd/physmap.h>
-#include <linux/gpio.h>
-#include <linux/i2c.h>
-#include <linux/i2c/pxa-i2c.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/ads7846.h>
-#include <linux/spi/pxa2xx_spi.h>
-#include <linux/mtd/sharpsl.h>
-
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-#include <asm/setup.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/pxa25x.h>
-#include <mach/mmc.h>
-#include <mach/udc.h>
-#include <mach/irda.h>
-#include <mach/poodle.h>
-#include <mach/pxafb.h>
-
-#include <asm/hardware/scoop.h>
-#include <asm/hardware/locomo.h>
-#include <asm/mach/sharpsl_param.h>
-
-#include "generic.h"
-#include "devices.h"
-
-static unsigned long poodle_pin_config[] __initdata = {
-	/* I/O */
-	GPIO79_nCS_3,
-	GPIO80_nCS_4,
-	GPIO18_RDY,
-
-	/* Clock */
-	GPIO12_32KHz,
-
-	/* SSP1 */
-	GPIO23_SSP1_SCLK,
-	GPIO25_SSP1_TXD,
-	GPIO26_SSP1_RXD,
-	GPIO24_GPIO,	/* POODLE_GPIO_TP_CS - SFRM as chip select */
-
-	/* I2S */
-	GPIO28_I2S_BITCLK_OUT,
-	GPIO29_I2S_SDATA_IN,
-	GPIO30_I2S_SDATA_OUT,
-	GPIO31_I2S_SYNC,
-	GPIO32_I2S_SYSCLK,
-
-	/* Infra-Red */
-	GPIO47_FICP_TXD,
-	GPIO46_FICP_RXD,
-
-	/* FFUART */
-	GPIO40_FFUART_DTR,
-	GPIO41_FFUART_RTS,
-	GPIO39_FFUART_TXD,
-	GPIO37_FFUART_DSR,
-	GPIO34_FFUART_RXD,
-	GPIO35_FFUART_CTS,
-
-	/* LCD */
-	GPIOxx_LCD_TFT_16BPP,
-
-	/* PC Card */
-	GPIO48_nPOE,
-	GPIO49_nPWE,
-	GPIO50_nPIOR,
-	GPIO51_nPIOW,
-	GPIO52_nPCE_1,
-	GPIO53_nPCE_2,
-	GPIO54_nPSKTSEL,
-	GPIO55_nPREG,
-	GPIO56_nPWAIT,
-	GPIO57_nIOIS16,
-
-	/* MMC */
-	GPIO6_MMC_CLK,
-	GPIO8_MMC_CS0,
-
-	/* GPIO */
-	GPIO9_GPIO,	/* POODLE_GPIO_nSD_DETECT */
-	GPIO7_GPIO,	/* POODLE_GPIO_nSD_WP */
-	GPIO3_GPIO,	/* POODLE_GPIO_SD_PWR */
-	GPIO33_GPIO,	/* POODLE_GPIO_SD_PWR1 */
-
-	GPIO20_GPIO,	/* POODLE_GPIO_USB_PULLUP */
-	GPIO22_GPIO,	/* POODLE_GPIO_IR_ON */
-};
-
-static struct resource poodle_scoop_resources[] = {
-	[0] = {
-		.start		= 0x10800000,
-		.end		= 0x10800fff,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct scoop_config poodle_scoop_setup = {
-	.io_dir		= POODLE_SCOOP_IO_DIR,
-	.io_out		= POODLE_SCOOP_IO_OUT,
-	.gpio_base	= POODLE_SCOOP_GPIO_BASE,
-};
-
-struct platform_device poodle_scoop_device = {
-	.name		= "sharp-scoop",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &poodle_scoop_setup,
-	},
-	.num_resources	= ARRAY_SIZE(poodle_scoop_resources),
-	.resource	= poodle_scoop_resources,
-};
-
-static struct scoop_pcmcia_dev poodle_pcmcia_scoop[] = {
-{
-	.dev        = &poodle_scoop_device.dev,
-	.irq        = POODLE_IRQ_GPIO_CF_IRQ,
-	.cd_irq     = POODLE_IRQ_GPIO_CF_CD,
-	.cd_irq_str = "PCMCIA0 CD",
-},
-};
-
-static struct scoop_pcmcia_config poodle_pcmcia_config = {
-	.devs         = &poodle_pcmcia_scoop[0],
-	.num_devs     = 1,
-};
-
-EXPORT_SYMBOL(poodle_scoop_device);
-
-
-static struct platform_device poodle_audio_device = {
-	.name	= "poodle-audio",
-	.id	= -1,
-};
-
-/* LoCoMo device */
-static struct resource locomo_resources[] = {
-	[0] = {
-		.start		= 0x10000000,
-		.end		= 0x10001fff,
-		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start		= PXA_GPIO_TO_IRQ(10),
-		.end		= PXA_GPIO_TO_IRQ(10),
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct locomo_platform_data locomo_info = {
-	.irq_base	= IRQ_BOARD_START,
-};
-
-struct platform_device poodle_locomo_device = {
-	.name		= "locomo",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(locomo_resources),
-	.resource	= locomo_resources,
-	.dev		= {
-		.platform_data	= &locomo_info,
-	},
-};
-
-EXPORT_SYMBOL(poodle_locomo_device);
-
-#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE)
-static struct pxa2xx_spi_master poodle_spi_info = {
-	.num_chipselect	= 1,
-};
-
-static struct ads7846_platform_data poodle_ads7846_info = {
-	.model			= 7846,
-	.vref_delay_usecs	= 100,
-	.x_plate_ohms		= 419,
-	.y_plate_ohms		= 486,
-	.gpio_pendown		= POODLE_GPIO_TP_INT,
-};
-
-static struct pxa2xx_spi_chip poodle_ads7846_chip = {
-	.gpio_cs		= POODLE_GPIO_TP_CS,
-};
-
-static struct spi_board_info poodle_spi_devices[] = {
-	{
-		.modalias	= "ads7846",
-		.max_speed_hz	= 10000,
-		.bus_num	= 1,
-		.platform_data	= &poodle_ads7846_info,
-		.controller_data= &poodle_ads7846_chip,
-		.irq		= PXA_GPIO_TO_IRQ(POODLE_GPIO_TP_INT),
-	},
-};
-
-static void __init poodle_init_spi(void)
-{
-	pxa2xx_set_spi_info(1, &poodle_spi_info);
-	spi_register_board_info(ARRAY_AND_SIZE(poodle_spi_devices));
-}
-#else
-static inline void poodle_init_spi(void) {}
-#endif
-
-/*
- * MMC/SD Device
- *
- * The card detect interrupt isn't debounced so we delay it by 250ms
- * to give the card a chance to fully insert/eject.
- */
-static int poodle_mci_init(struct device *dev, irq_handler_t poodle_detect_int, void *data)
-{
-	int err;
-
-	err = gpio_request(POODLE_GPIO_SD_PWR, "SD_PWR");
-	if (err)
-		goto err_free_2;
-
-	err = gpio_request(POODLE_GPIO_SD_PWR1, "SD_PWR1");
-	if (err)
-		goto err_free_3;
-
-	gpio_direction_output(POODLE_GPIO_SD_PWR, 0);
-	gpio_direction_output(POODLE_GPIO_SD_PWR1, 0);
-
-	return 0;
-
-err_free_3:
-	gpio_free(POODLE_GPIO_SD_PWR);
-err_free_2:
-	return err;
-}
-
-static void poodle_mci_setpower(struct device *dev, unsigned int vdd)
-{
-	struct pxamci_platform_data* p_d = dev->platform_data;
-
-	if ((1 << vdd) & p_d->ocr_mask) {
-		gpio_set_value(POODLE_GPIO_SD_PWR, 1);
-		mdelay(2);
-		gpio_set_value(POODLE_GPIO_SD_PWR1, 1);
-	} else {
-		gpio_set_value(POODLE_GPIO_SD_PWR1, 0);
-		gpio_set_value(POODLE_GPIO_SD_PWR, 0);
-	}
-}
-
-static void poodle_mci_exit(struct device *dev, void *data)
-{
-	gpio_free(POODLE_GPIO_SD_PWR1);
-	gpio_free(POODLE_GPIO_SD_PWR);
-}
-
-static struct pxamci_platform_data poodle_mci_platform_data = {
-	.detect_delay_ms	= 250,
-	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
-	.init 			= poodle_mci_init,
-	.setpower 		= poodle_mci_setpower,
-	.exit			= poodle_mci_exit,
-	.gpio_card_detect	= POODLE_GPIO_nSD_DETECT,
-	.gpio_card_ro		= POODLE_GPIO_nSD_WP,
-	.gpio_power		= -1,
-};
-
-
-/*
- * Irda
- */
-static struct pxaficp_platform_data poodle_ficp_platform_data = {
-	.gpio_pwdown		= POODLE_GPIO_IR_ON,
-	.transceiver_cap	= IR_SIRMODE | IR_OFF,
-};
-
-
-/*
- * USB Device Controller
- */
-static struct pxa2xx_udc_mach_info udc_info __initdata = {
-	/* no connect GPIO; poodle can't tell connection status */
-	.gpio_pullup	= POODLE_GPIO_USB_PULLUP,
-};
-
-
-/* PXAFB device */
-static struct pxafb_mode_info poodle_fb_mode = {
-	.pixclock	= 144700,
-	.xres		= 320,
-	.yres		= 240,
-	.bpp		= 16,
-	.hsync_len	= 7,
-	.left_margin	= 11,
-	.right_margin	= 30,
-	.vsync_len	= 2,
-	.upper_margin	= 2,
-	.lower_margin	= 0,
-	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-};
-
-static struct pxafb_mach_info poodle_fb_info = {
-	.modes		= &poodle_fb_mode,
-	.num_modes	= 1,
-	.lcd_conn	= LCD_COLOR_TFT_16BPP,
-};
-
-static struct mtd_partition sharpsl_nand_partitions[] = {
-	{
-		.name = "System Area",
-		.offset = 0,
-		.size = 7 * 1024 * 1024,
-	},
-	{
-		.name = "Root Filesystem",
-		.offset = 7 * 1024 * 1024,
-		.size = 22 * 1024 * 1024,
-	},
-	{
-		.name = "Home Filesystem",
-		.offset = MTDPART_OFS_APPEND,
-		.size = MTDPART_SIZ_FULL,
-	},
-};
-
-static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
-
-static struct nand_bbt_descr sharpsl_bbt = {
-	.options = 0,
-	.offs = 4,
-	.len = 2,
-	.pattern = scan_ff_pattern
-};
-
-static struct sharpsl_nand_platform_data sharpsl_nand_platform_data = {
-	.badblock_pattern	= &sharpsl_bbt,
-	.partitions		= sharpsl_nand_partitions,
-	.nr_partitions		= ARRAY_SIZE(sharpsl_nand_partitions),
-};
-
-static struct resource sharpsl_nand_resources[] = {
-	{
-		.start	= 0x0C000000,
-		.end	= 0x0C000FFF,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device sharpsl_nand_device = {
-	.name		= "sharpsl-nand",
-	.id		= -1,
-	.resource	= sharpsl_nand_resources,
-	.num_resources	= ARRAY_SIZE(sharpsl_nand_resources),
-	.dev.platform_data	= &sharpsl_nand_platform_data,
-};
-
-static struct mtd_partition sharpsl_rom_parts[] = {
-	{
-		.name	="Boot PROM Filesystem",
-		.offset	= 0x00120000,
-		.size	= MTDPART_SIZ_FULL,
-	},
-};
-
-static struct physmap_flash_data sharpsl_rom_data = {
-	.width		= 2,
-	.nr_parts	= ARRAY_SIZE(sharpsl_rom_parts),
-	.parts		= sharpsl_rom_parts,
-};
-
-static struct resource sharpsl_rom_resources[] = {
-	{
-		.start	= 0x00000000,
-		.end	= 0x007fffff,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device sharpsl_rom_device = {
-	.name	= "physmap-flash",
-	.id	= -1,
-	.resource = sharpsl_rom_resources,
-	.num_resources = ARRAY_SIZE(sharpsl_rom_resources),
-	.dev.platform_data = &sharpsl_rom_data,
-};
-
-static struct platform_device *devices[] __initdata = {
-	&poodle_locomo_device,
-	&poodle_scoop_device,
-	&poodle_audio_device,
-	&sharpsl_nand_device,
-	&sharpsl_rom_device,
-};
-
-static struct i2c_board_info __initdata poodle_i2c_devices[] = {
-	{ I2C_BOARD_INFO("wm8731", 0x1b) },
-};
-
-static void poodle_poweroff(void)
-{
-	pxa_restart('h', NULL);
-}
-
-static void __init poodle_init(void)
-{
-	int ret = 0;
-
-	pm_power_off = poodle_poweroff;
-
-	PCFR |= PCFR_OPDE;
-
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(poodle_pin_config));
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	platform_scoop_config = &poodle_pcmcia_config;
-
-	ret = platform_add_devices(devices, ARRAY_SIZE(devices));
-	if (ret)
-		pr_warning("poodle: Unable to register LoCoMo device\n");
-
-	pxa_set_fb_info(&poodle_locomo_device.dev, &poodle_fb_info);
-	pxa_set_udc_info(&udc_info);
-	pxa_set_mci_info(&poodle_mci_platform_data);
-	pxa_set_ficp_info(&poodle_ficp_platform_data);
-	pxa_set_i2c_info(NULL);
-	i2c_register_board_info(0, ARRAY_AND_SIZE(poodle_i2c_devices));
-	poodle_init_spi();
-}
-
-static void __init fixup_poodle(struct tag *tags, char **cmdline,
-				struct meminfo *mi)
-{
-	sharpsl_save_param();
-	mi->nr_banks=1;
-	mi->bank[0].start = 0xa0000000;
-	mi->bank[0].size = (32*1024*1024);
-}
-
-MACHINE_START(POODLE, "SHARP Poodle")
-	.fixup		= fixup_poodle,
-	.map_io		= pxa25x_map_io,
-	.nr_irqs	= POODLE_NR_IRQS,	/* 4 for LoCoMo */
-	.init_irq	= pxa25x_init_irq,
-	.handle_irq	= pxa25x_handle_irq,
-	.timer		= &pxa_timer,
-	.init_machine	= poodle_init,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/pxa25x.c b/ANDROID_3.4.5/arch/arm/mach-pxa/pxa25x.c
deleted file mode 100644
index 3352b37b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/pxa25x.c
+++ /dev/null
@@ -1,386 +0,0 @@
-/*
- *  linux/arch/arm/mach-pxa/pxa25x.c
- *
- *  Author:	Nicolas Pitre
- *  Created:	Jun 15, 2001
- *  Copyright:	MontaVista Software Inc.
- *
- * Code specific to PXA21x/25x/26x variants.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Since this file should be linked before any other machine specific file,
- * the __initcall() here will be executed first.  This serves as default
- * initialization stuff for PXA machines which can be overridden later if
- * need be.
- */
-#include <linux/gpio.h>
-#include <linux/gpio-pxa.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/suspend.h>
-#include <linux/syscore_ops.h>
-#include <linux/irq.h>
-
-#include <asm/mach/map.h>
-#include <asm/suspend.h>
-#include <mach/hardware.h>
-#include <mach/irqs.h>
-#include <mach/pxa25x.h>
-#include <mach/reset.h>
-#include <mach/pm.h>
-#include <mach/dma.h>
-#include <mach/smemc.h>
-
-#include "generic.h"
-#include "devices.h"
-#include "clock.h"
-
-/*
- * Various clock factors driven by the CCCR register.
- */
-
-/* Crystal Frequency to Memory Frequency Multiplier (L) */
-static unsigned char L_clk_mult[32] = { 0, 27, 32, 36, 40, 45, 0, };
-
-/* Memory Frequency to Run Mode Frequency Multiplier (M) */
-static unsigned char M_clk_mult[4] = { 0, 1, 2, 4 };
-
-/* Run Mode Frequency to Turbo Mode Frequency Multiplier (N) */
-/* Note: we store the value N * 2 here. */
-static unsigned char N2_clk_mult[8] = { 0, 0, 2, 3, 4, 0, 6, 0 };
-
-/* Crystal clock */
-#define BASE_CLK	3686400
-
-/*
- * Get the clock frequency as reflected by CCCR and the turbo flag.
- * We assume these values have been applied via a fcs.
- * If info is not 0 we also display the current settings.
- */
-unsigned int pxa25x_get_clk_frequency_khz(int info)
-{
-	unsigned long cccr, turbo;
-	unsigned int l, L, m, M, n2, N;
-
-	cccr = CCCR;
-	asm( "mrc\tp14, 0, %0, c6, c0, 0" : "=r" (turbo) );
-
-	l  =  L_clk_mult[(cccr >> 0) & 0x1f];
-	m  =  M_clk_mult[(cccr >> 5) & 0x03];
-	n2 = N2_clk_mult[(cccr >> 7) & 0x07];
-
-	L = l * BASE_CLK;
-	M = m * L;
-	N = n2 * M / 2;
-
-	if(info)
-	{
-		L += 5000;
-		printk( KERN_INFO "Memory clock: %d.%02dMHz (*%d)\n",
-			L / 1000000, (L % 1000000) / 10000, l );
-		M += 5000;
-		printk( KERN_INFO "Run Mode clock: %d.%02dMHz (*%d)\n",
-			M / 1000000, (M % 1000000) / 10000, m );
-		N += 5000;
-		printk( KERN_INFO "Turbo Mode clock: %d.%02dMHz (*%d.%d, %sactive)\n",
-			N / 1000000, (N % 1000000) / 10000, n2 / 2, (n2 % 2) * 5,
-			(turbo & 1) ? "" : "in" );
-	}
-
-	return (turbo & 1) ? (N/1000) : (M/1000);
-}
-
-static unsigned long clk_pxa25x_mem_getrate(struct clk *clk)
-{
-	return L_clk_mult[(CCCR >> 0) & 0x1f] * BASE_CLK;
-}
-
-static const struct clkops clk_pxa25x_mem_ops = {
-	.enable		= clk_dummy_enable,
-	.disable	= clk_dummy_disable,
-	.getrate	= clk_pxa25x_mem_getrate,
-};
-
-static const struct clkops clk_pxa25x_lcd_ops = {
-	.enable		= clk_pxa2xx_cken_enable,
-	.disable	= clk_pxa2xx_cken_disable,
-	.getrate	= clk_pxa25x_mem_getrate,
-};
-
-static unsigned long gpio12_config_32k[] = {
-	GPIO12_32KHz,
-};
-
-static unsigned long gpio12_config_gpio[] = {
-	GPIO12_GPIO,
-};
-
-static void clk_gpio12_enable(struct clk *clk)
-{
-	pxa2xx_mfp_config(gpio12_config_32k, 1);
-}
-
-static void clk_gpio12_disable(struct clk *clk)
-{
-	pxa2xx_mfp_config(gpio12_config_gpio, 1);
-}
-
-static const struct clkops clk_pxa25x_gpio12_ops = {
-	.enable         = clk_gpio12_enable,
-	.disable        = clk_gpio12_disable,
-};
-
-static unsigned long gpio11_config_3m6[] = {
-	GPIO11_3_6MHz,
-};
-
-static unsigned long gpio11_config_gpio[] = {
-	GPIO11_GPIO,
-};
-
-static void clk_gpio11_enable(struct clk *clk)
-{
-	pxa2xx_mfp_config(gpio11_config_3m6, 1);
-}
-
-static void clk_gpio11_disable(struct clk *clk)
-{
-	pxa2xx_mfp_config(gpio11_config_gpio, 1);
-}
-
-static const struct clkops clk_pxa25x_gpio11_ops = {
-	.enable         = clk_gpio11_enable,
-	.disable        = clk_gpio11_disable,
-};
-
-/*
- * 3.6864MHz -> OST, GPIO, SSP, PWM, PLLs (95.842MHz, 147.456MHz)
- * 95.842MHz -> MMC 19.169MHz, I2C 31.949MHz, FICP 47.923MHz, USB 47.923MHz
- * 147.456MHz -> UART 14.7456MHz, AC97 12.288MHz, I2S 5.672MHz (allegedly)
- */
-
-/*
- * PXA 2xx clock declarations.
- */
-static DEFINE_PXA2_CKEN(pxa25x_hwuart, HWUART, 14745600, 1);
-static DEFINE_PXA2_CKEN(pxa25x_ffuart, FFUART, 14745600, 1);
-static DEFINE_PXA2_CKEN(pxa25x_btuart, BTUART, 14745600, 1);
-static DEFINE_PXA2_CKEN(pxa25x_stuart, STUART, 14745600, 1);
-static DEFINE_PXA2_CKEN(pxa25x_usb, USB, 47923000, 5);
-static DEFINE_PXA2_CKEN(pxa25x_mmc, MMC, 19169000, 0);
-static DEFINE_PXA2_CKEN(pxa25x_i2c, I2C, 31949000, 0);
-static DEFINE_PXA2_CKEN(pxa25x_ssp, SSP, 3686400, 0);
-static DEFINE_PXA2_CKEN(pxa25x_nssp, NSSP, 3686400, 0);
-static DEFINE_PXA2_CKEN(pxa25x_assp, ASSP, 3686400, 0);
-static DEFINE_PXA2_CKEN(pxa25x_pwm0, PWM0, 3686400, 0);
-static DEFINE_PXA2_CKEN(pxa25x_pwm1, PWM1, 3686400, 0);
-static DEFINE_PXA2_CKEN(pxa25x_ac97, AC97, 24576000, 0);
-static DEFINE_PXA2_CKEN(pxa25x_i2s, I2S, 14745600, 0);
-static DEFINE_PXA2_CKEN(pxa25x_ficp, FICP, 47923000, 0);
-
-static DEFINE_CK(pxa25x_lcd, LCD, &clk_pxa25x_lcd_ops);
-static DEFINE_CLK(pxa25x_gpio11, &clk_pxa25x_gpio11_ops, 3686400, 0);
-static DEFINE_CLK(pxa25x_gpio12, &clk_pxa25x_gpio12_ops, 32768, 0);
-static DEFINE_CLK(pxa25x_mem, &clk_pxa25x_mem_ops, 0, 0);
-
-static struct clk_lookup pxa25x_clkregs[] = {
-	INIT_CLKREG(&clk_pxa25x_lcd, "pxa2xx-fb", NULL),
-	INIT_CLKREG(&clk_pxa25x_ffuart, "pxa2xx-uart.0", NULL),
-	INIT_CLKREG(&clk_pxa25x_btuart, "pxa2xx-uart.1", NULL),
-	INIT_CLKREG(&clk_pxa25x_stuart, "pxa2xx-uart.2", NULL),
-	INIT_CLKREG(&clk_pxa25x_usb, "pxa25x-udc", NULL),
-	INIT_CLKREG(&clk_pxa25x_mmc, "pxa2xx-mci.0", NULL),
-	INIT_CLKREG(&clk_pxa25x_i2c, "pxa2xx-i2c.0", NULL),
-	INIT_CLKREG(&clk_pxa25x_ssp, "pxa25x-ssp.0", NULL),
-	INIT_CLKREG(&clk_pxa25x_nssp, "pxa25x-nssp.1", NULL),
-	INIT_CLKREG(&clk_pxa25x_assp, "pxa25x-nssp.2", NULL),
-	INIT_CLKREG(&clk_pxa25x_pwm0, "pxa25x-pwm.0", NULL),
-	INIT_CLKREG(&clk_pxa25x_pwm1, "pxa25x-pwm.1", NULL),
-	INIT_CLKREG(&clk_pxa25x_i2s, "pxa2xx-i2s", NULL),
-	INIT_CLKREG(&clk_pxa25x_stuart, "pxa2xx-ir", "UARTCLK"),
-	INIT_CLKREG(&clk_pxa25x_ficp, "pxa2xx-ir", "FICPCLK"),
-	INIT_CLKREG(&clk_pxa25x_ac97, NULL, "AC97CLK"),
-	INIT_CLKREG(&clk_pxa25x_gpio11, NULL, "GPIO11_CLK"),
-	INIT_CLKREG(&clk_pxa25x_gpio12, NULL, "GPIO12_CLK"),
-	INIT_CLKREG(&clk_pxa25x_mem, "pxa2xx-pcmcia", NULL),
-	INIT_CLKREG(&clk_dummy, "pxa-gpio", NULL),
-};
-
-static struct clk_lookup pxa25x_hwuart_clkreg =
-	INIT_CLKREG(&clk_pxa25x_hwuart, "pxa2xx-uart.3", NULL);
-
-#ifdef CONFIG_PM
-
-#define SAVE(x)		sleep_save[SLEEP_SAVE_##x] = x
-#define RESTORE(x)	x = sleep_save[SLEEP_SAVE_##x]
-
-/*
- * List of global PXA peripheral registers to preserve.
- * More ones like CP and general purpose register values are preserved
- * with the stack pointer in sleep.S.
- */
-enum {
-	SLEEP_SAVE_PSTR,
-	SLEEP_SAVE_COUNT
-};
-
-
-static void pxa25x_cpu_pm_save(unsigned long *sleep_save)
-{
-	SAVE(PSTR);
-}
-
-static void pxa25x_cpu_pm_restore(unsigned long *sleep_save)
-{
-	RESTORE(PSTR);
-}
-
-static void pxa25x_cpu_pm_enter(suspend_state_t state)
-{
-	/* Clear reset status */
-	RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR;
-
-	switch (state) {
-	case PM_SUSPEND_MEM:
-		cpu_suspend(PWRMODE_SLEEP, pxa25x_finish_suspend);
-		break;
-	}
-}
-
-static int pxa25x_cpu_pm_prepare(void)
-{
-	/* set resume return address */
-	PSPR = virt_to_phys(cpu_resume);
-	return 0;
-}
-
-static void pxa25x_cpu_pm_finish(void)
-{
-	/* ensure not to come back here if it wasn't intended */
-	PSPR = 0;
-}
-
-static struct pxa_cpu_pm_fns pxa25x_cpu_pm_fns = {
-	.save_count	= SLEEP_SAVE_COUNT,
-	.valid		= suspend_valid_only_mem,
-	.save		= pxa25x_cpu_pm_save,
-	.restore	= pxa25x_cpu_pm_restore,
-	.enter		= pxa25x_cpu_pm_enter,
-	.prepare	= pxa25x_cpu_pm_prepare,
-	.finish		= pxa25x_cpu_pm_finish,
-};
-
-static void __init pxa25x_init_pm(void)
-{
-	pxa_cpu_pm_fns = &pxa25x_cpu_pm_fns;
-}
-#else
-static inline void pxa25x_init_pm(void) {}
-#endif
-
-/* PXA25x: supports wakeup from GPIO0..GPIO15 and RTC alarm
- */
-
-static int pxa25x_set_wake(struct irq_data *d, unsigned int on)
-{
-	int gpio = pxa_irq_to_gpio(d->irq);
-	uint32_t mask = 0;
-
-	if (gpio >= 0 && gpio < 85)
-		return gpio_set_wake(gpio, on);
-
-	if (d->irq == IRQ_RTCAlrm) {
-		mask = PWER_RTC;
-		goto set_pwer;
-	}
-
-	return -EINVAL;
-
-set_pwer:
-	if (on)
-		PWER |= mask;
-	else
-		PWER &=~mask;
-
-	return 0;
-}
-
-void __init pxa25x_init_irq(void)
-{
-	pxa_init_irq(32, pxa25x_set_wake);
-}
-
-#ifdef CONFIG_CPU_PXA26x
-void __init pxa26x_init_irq(void)
-{
-	pxa_init_irq(32, pxa25x_set_wake);
-}
-#endif
-
-static struct map_desc pxa25x_io_desc[] __initdata = {
-	{	/* Mem Ctl */
-		.virtual	= (unsigned long)SMEMC_VIRT,
-		.pfn		= __phys_to_pfn(PXA2XX_SMEMC_BASE),
-		.length		= 0x00200000,
-		.type		= MT_DEVICE
-	},
-};
-
-void __init pxa25x_map_io(void)
-{
-	pxa_map_io();
-	iotable_init(ARRAY_AND_SIZE(pxa25x_io_desc));
-	pxa25x_get_clk_frequency_khz(1);
-}
-
-static struct platform_device *pxa25x_devices[] __initdata = {
-	&pxa25x_device_udc,
-	&pxa_device_pmu,
-	&pxa_device_i2s,
-	&sa1100_device_rtc,
-	&pxa25x_device_ssp,
-	&pxa25x_device_nssp,
-	&pxa25x_device_assp,
-	&pxa25x_device_pwm0,
-	&pxa25x_device_pwm1,
-	&pxa_device_asoc_platform,
-};
-
-static int __init pxa25x_init(void)
-{
-	int ret = 0;
-
-	if (cpu_is_pxa25x()) {
-
-		reset_status = RCSR;
-
-		clkdev_add_table(pxa25x_clkregs, ARRAY_SIZE(pxa25x_clkregs));
-
-		if ((ret = pxa_init_dma(IRQ_DMA, 16)))
-			return ret;
-
-		pxa25x_init_pm();
-
-		register_syscore_ops(&pxa_irq_syscore_ops);
-		register_syscore_ops(&pxa2xx_mfp_syscore_ops);
-		register_syscore_ops(&pxa2xx_clock_syscore_ops);
-
-		ret = platform_add_devices(pxa25x_devices,
-					   ARRAY_SIZE(pxa25x_devices));
-		if (ret)
-			return ret;
-	}
-
-	/* Only add HWUART for PXA255/26x; PXA210/250 do not have it. */
-	if (cpu_is_pxa255())
-		clkdev_add(&pxa25x_hwuart_clkreg);
-
-	return ret;
-}
-
-postcore_initcall(pxa25x_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/pxa27x.c b/ANDROID_3.4.5/arch/arm/mach-pxa/pxa27x.c
deleted file mode 100644
index 4726c246..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/pxa27x.c
+++ /dev/null
@@ -1,471 +0,0 @@
-/*
- *  linux/arch/arm/mach-pxa/pxa27x.c
- *
- *  Author:	Nicolas Pitre
- *  Created:	Nov 05, 2002
- *  Copyright:	MontaVista Software Inc.
- *
- * Code specific to PXA27x aka Bulverde.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/gpio.h>
-#include <linux/gpio-pxa.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/suspend.h>
-#include <linux/platform_device.h>
-#include <linux/syscore_ops.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/i2c/pxa-i2c.h>
-
-#include <asm/mach/map.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/suspend.h>
-#include <mach/irqs.h>
-#include <mach/pxa27x.h>
-#include <mach/reset.h>
-#include <mach/ohci.h>
-#include <mach/pm.h>
-#include <mach/dma.h>
-#include <mach/smemc.h>
-
-#include "generic.h"
-#include "devices.h"
-#include "clock.h"
-
-void pxa27x_clear_otgph(void)
-{
-	if (cpu_is_pxa27x() && (PSSR & PSSR_OTGPH))
-		PSSR |= PSSR_OTGPH;
-}
-EXPORT_SYMBOL(pxa27x_clear_otgph);
-
-static unsigned long ac97_reset_config[] = {
-	GPIO113_GPIO,
-	GPIO113_AC97_nRESET,
-	GPIO95_GPIO,
-	GPIO95_AC97_nRESET,
-};
-
-void pxa27x_assert_ac97reset(int reset_gpio, int on)
-{
-	if (reset_gpio == 113)
-		pxa2xx_mfp_config(on ? &ac97_reset_config[0] :
-				       &ac97_reset_config[1], 1);
-
-	if (reset_gpio == 95)
-		pxa2xx_mfp_config(on ? &ac97_reset_config[2] :
-				       &ac97_reset_config[3], 1);
-}
-EXPORT_SYMBOL_GPL(pxa27x_assert_ac97reset);
-
-/* Crystal clock: 13MHz */
-#define BASE_CLK	13000000
-
-/*
- * Get the clock frequency as reflected by CCSR and the turbo flag.
- * We assume these values have been applied via a fcs.
- * If info is not 0 we also display the current settings.
- */
-unsigned int pxa27x_get_clk_frequency_khz(int info)
-{
-	unsigned long ccsr, clkcfg;
-	unsigned int l, L, m, M, n2, N, S;
-       	int cccr_a, t, ht, b;
-
-	ccsr = CCSR;
-	cccr_a = CCCR & (1 << 25);
-
-	/* Read clkcfg register: it has turbo, b, half-turbo (and f) */
-	asm( "mrc\tp14, 0, %0, c6, c0, 0" : "=r" (clkcfg) );
-	t  = clkcfg & (1 << 0);
-	ht = clkcfg & (1 << 2);
-	b  = clkcfg & (1 << 3);
-
-	l  = ccsr & 0x1f;
-	n2 = (ccsr>>7) & 0xf;
-	m  = (l <= 10) ? 1 : (l <= 20) ? 2 : 4;
-
-	L  = l * BASE_CLK;
-	N  = (L * n2) / 2;
-	M  = (!cccr_a) ? (L/m) : ((b) ? L : (L/2));
-	S  = (b) ? L : (L/2);
-
-	if (info) {
-		printk( KERN_INFO "Run Mode clock: %d.%02dMHz (*%d)\n",
-			L / 1000000, (L % 1000000) / 10000, l );
-		printk( KERN_INFO "Turbo Mode clock: %d.%02dMHz (*%d.%d, %sactive)\n",
-			N / 1000000, (N % 1000000)/10000, n2 / 2, (n2 % 2)*5,
-			(t) ? "" : "in" );
-		printk( KERN_INFO "Memory clock: %d.%02dMHz (/%d)\n",
-			M / 1000000, (M % 1000000) / 10000, m );
-		printk( KERN_INFO "System bus clock: %d.%02dMHz \n",
-			S / 1000000, (S % 1000000) / 10000 );
-	}
-
-	return (t) ? (N/1000) : (L/1000);
-}
-
-/*
- * Return the current mem clock frequency as reflected by CCCR[A], B, and L
- */
-static unsigned long clk_pxa27x_mem_getrate(struct clk *clk)
-{
-	unsigned long ccsr, clkcfg;
-	unsigned int l, L, m, M;
-       	int cccr_a, b;
-
-	ccsr = CCSR;
-	cccr_a = CCCR & (1 << 25);
-
-	/* Read clkcfg register: it has turbo, b, half-turbo (and f) */
-	asm( "mrc\tp14, 0, %0, c6, c0, 0" : "=r" (clkcfg) );
-	b = clkcfg & (1 << 3);
-
-	l = ccsr & 0x1f;
-	m = (l <= 10) ? 1 : (l <= 20) ? 2 : 4;
-
-	L = l * BASE_CLK;
-	M = (!cccr_a) ? (L/m) : ((b) ? L : (L/2));
-
-	return M;
-}
-
-static const struct clkops clk_pxa27x_mem_ops = {
-	.enable		= clk_dummy_enable,
-	.disable	= clk_dummy_disable,
-	.getrate	= clk_pxa27x_mem_getrate,
-};
-
-/*
- * Return the current LCD clock frequency in units of 10kHz as
- */
-static unsigned int pxa27x_get_lcdclk_frequency_10khz(void)
-{
-	unsigned long ccsr;
-	unsigned int l, L, k, K;
-
-	ccsr = CCSR;
-
-	l = ccsr & 0x1f;
-	k = (l <= 7) ? 1 : (l <= 16) ? 2 : 4;
-
-	L = l * BASE_CLK;
-	K = L / k;
-
-	return (K / 10000);
-}
-
-static unsigned long clk_pxa27x_lcd_getrate(struct clk *clk)
-{
-	return pxa27x_get_lcdclk_frequency_10khz() * 10000;
-}
-
-static const struct clkops clk_pxa27x_lcd_ops = {
-	.enable		= clk_pxa2xx_cken_enable,
-	.disable	= clk_pxa2xx_cken_disable,
-	.getrate	= clk_pxa27x_lcd_getrate,
-};
-
-static DEFINE_PXA2_CKEN(pxa27x_ffuart, FFUART, 14857000, 1);
-static DEFINE_PXA2_CKEN(pxa27x_btuart, BTUART, 14857000, 1);
-static DEFINE_PXA2_CKEN(pxa27x_stuart, STUART, 14857000, 1);
-static DEFINE_PXA2_CKEN(pxa27x_i2s, I2S, 14682000, 0);
-static DEFINE_PXA2_CKEN(pxa27x_i2c, I2C, 32842000, 0);
-static DEFINE_PXA2_CKEN(pxa27x_usb, USB, 48000000, 5);
-static DEFINE_PXA2_CKEN(pxa27x_mmc, MMC, 19500000, 0);
-static DEFINE_PXA2_CKEN(pxa27x_ficp, FICP, 48000000, 0);
-static DEFINE_PXA2_CKEN(pxa27x_usbhost, USBHOST, 48000000, 0);
-static DEFINE_PXA2_CKEN(pxa27x_pwri2c, PWRI2C, 13000000, 0);
-static DEFINE_PXA2_CKEN(pxa27x_keypad, KEYPAD, 32768, 0);
-static DEFINE_PXA2_CKEN(pxa27x_ssp1, SSP1, 13000000, 0);
-static DEFINE_PXA2_CKEN(pxa27x_ssp2, SSP2, 13000000, 0);
-static DEFINE_PXA2_CKEN(pxa27x_ssp3, SSP3, 13000000, 0);
-static DEFINE_PXA2_CKEN(pxa27x_pwm0, PWM0, 13000000, 0);
-static DEFINE_PXA2_CKEN(pxa27x_pwm1, PWM1, 13000000, 0);
-static DEFINE_PXA2_CKEN(pxa27x_ac97, AC97, 24576000, 0);
-static DEFINE_PXA2_CKEN(pxa27x_ac97conf, AC97CONF, 24576000, 0);
-static DEFINE_PXA2_CKEN(pxa27x_msl, MSL, 48000000, 0);
-static DEFINE_PXA2_CKEN(pxa27x_usim, USIM, 48000000, 0);
-static DEFINE_PXA2_CKEN(pxa27x_memstk, MEMSTK, 19500000, 0);
-static DEFINE_PXA2_CKEN(pxa27x_im, IM, 0, 0);
-static DEFINE_PXA2_CKEN(pxa27x_memc, MEMC, 0, 0);
-
-static DEFINE_CK(pxa27x_lcd, LCD, &clk_pxa27x_lcd_ops);
-static DEFINE_CK(pxa27x_camera, CAMERA, &clk_pxa27x_lcd_ops);
-static DEFINE_CLK(pxa27x_mem, &clk_pxa27x_mem_ops, 0, 0);
-
-static struct clk_lookup pxa27x_clkregs[] = {
-	INIT_CLKREG(&clk_pxa27x_lcd, "pxa2xx-fb", NULL),
-	INIT_CLKREG(&clk_pxa27x_camera, "pxa27x-camera.0", NULL),
-	INIT_CLKREG(&clk_pxa27x_ffuart, "pxa2xx-uart.0", NULL),
-	INIT_CLKREG(&clk_pxa27x_btuart, "pxa2xx-uart.1", NULL),
-	INIT_CLKREG(&clk_pxa27x_stuart, "pxa2xx-uart.2", NULL),
-	INIT_CLKREG(&clk_pxa27x_i2s, "pxa2xx-i2s", NULL),
-	INIT_CLKREG(&clk_pxa27x_i2c, "pxa2xx-i2c.0", NULL),
-	INIT_CLKREG(&clk_pxa27x_usb, "pxa27x-udc", NULL),
-	INIT_CLKREG(&clk_pxa27x_mmc, "pxa2xx-mci.0", NULL),
-	INIT_CLKREG(&clk_pxa27x_stuart, "pxa2xx-ir", "UARTCLK"),
-	INIT_CLKREG(&clk_pxa27x_ficp, "pxa2xx-ir", "FICPCLK"),
-	INIT_CLKREG(&clk_pxa27x_usbhost, "pxa27x-ohci", NULL),
-	INIT_CLKREG(&clk_pxa27x_pwri2c, "pxa2xx-i2c.1", NULL),
-	INIT_CLKREG(&clk_pxa27x_keypad, "pxa27x-keypad", NULL),
-	INIT_CLKREG(&clk_pxa27x_ssp1, "pxa27x-ssp.0", NULL),
-	INIT_CLKREG(&clk_pxa27x_ssp2, "pxa27x-ssp.1", NULL),
-	INIT_CLKREG(&clk_pxa27x_ssp3, "pxa27x-ssp.2", NULL),
-	INIT_CLKREG(&clk_pxa27x_pwm0, "pxa27x-pwm.0", NULL),
-	INIT_CLKREG(&clk_pxa27x_pwm1, "pxa27x-pwm.1", NULL),
-	INIT_CLKREG(&clk_pxa27x_ac97, NULL, "AC97CLK"),
-	INIT_CLKREG(&clk_pxa27x_ac97conf, NULL, "AC97CONFCLK"),
-	INIT_CLKREG(&clk_pxa27x_msl, NULL, "MSLCLK"),
-	INIT_CLKREG(&clk_pxa27x_usim, NULL, "USIMCLK"),
-	INIT_CLKREG(&clk_pxa27x_memstk, NULL, "MSTKCLK"),
-	INIT_CLKREG(&clk_pxa27x_im, NULL, "IMCLK"),
-	INIT_CLKREG(&clk_pxa27x_memc, NULL, "MEMCLK"),
-	INIT_CLKREG(&clk_pxa27x_mem, "pxa2xx-pcmcia", NULL),
-	INIT_CLKREG(&clk_dummy, "pxa-gpio", NULL),
-};
-
-#ifdef CONFIG_PM
-
-#define SAVE(x)		sleep_save[SLEEP_SAVE_##x] = x
-#define RESTORE(x)	x = sleep_save[SLEEP_SAVE_##x]
-
-/*
- * allow platforms to override default PWRMODE setting used for PM_SUSPEND_MEM
- */
-static unsigned int pwrmode = PWRMODE_SLEEP;
-
-int __init pxa27x_set_pwrmode(unsigned int mode)
-{
-	switch (mode) {
-	case PWRMODE_SLEEP:
-	case PWRMODE_DEEPSLEEP:
-		pwrmode = mode;
-		return 0;
-	}
-
-	return -EINVAL;
-}
-
-/*
- * List of global PXA peripheral registers to preserve.
- * More ones like CP and general purpose register values are preserved
- * with the stack pointer in sleep.S.
- */
-enum {
-	SLEEP_SAVE_PSTR,
-	SLEEP_SAVE_MDREFR,
-	SLEEP_SAVE_PCFR,
-	SLEEP_SAVE_COUNT
-};
-
-void pxa27x_cpu_pm_save(unsigned long *sleep_save)
-{
-	sleep_save[SLEEP_SAVE_MDREFR] = __raw_readl(MDREFR);
-	SAVE(PCFR);
-
-	SAVE(PSTR);
-}
-
-void pxa27x_cpu_pm_restore(unsigned long *sleep_save)
-{
-	__raw_writel(sleep_save[SLEEP_SAVE_MDREFR], MDREFR);
-	RESTORE(PCFR);
-
-	PSSR = PSSR_RDH | PSSR_PH;
-
-	RESTORE(PSTR);
-}
-
-void pxa27x_cpu_pm_enter(suspend_state_t state)
-{
-	extern void pxa_cpu_standby(void);
-#ifndef CONFIG_IWMMXT
-	u64 acc0;
-
-	asm volatile("mra %Q0, %R0, acc0" : "=r" (acc0));
-#endif
-
-	/* ensure voltage-change sequencer not initiated, which hangs */
-	PCFR &= ~PCFR_FVC;
-
-	/* Clear edge-detect status register. */
-	PEDR = 0xDF12FE1B;
-
-	/* Clear reset status */
-	RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR;
-
-	switch (state) {
-	case PM_SUSPEND_STANDBY:
-		pxa_cpu_standby();
-		break;
-	case PM_SUSPEND_MEM:
-		cpu_suspend(pwrmode, pxa27x_finish_suspend);
-#ifndef CONFIG_IWMMXT
-		asm volatile("mar acc0, %Q0, %R0" : "=r" (acc0));
-#endif
-		break;
-	}
-}
-
-static int pxa27x_cpu_pm_valid(suspend_state_t state)
-{
-	return state == PM_SUSPEND_MEM || state == PM_SUSPEND_STANDBY;
-}
-
-static int pxa27x_cpu_pm_prepare(void)
-{
-	/* set resume return address */
-	PSPR = virt_to_phys(cpu_resume);
-	return 0;
-}
-
-static void pxa27x_cpu_pm_finish(void)
-{
-	/* ensure not to come back here if it wasn't intended */
-	PSPR = 0;
-}
-
-static struct pxa_cpu_pm_fns pxa27x_cpu_pm_fns = {
-	.save_count	= SLEEP_SAVE_COUNT,
-	.save		= pxa27x_cpu_pm_save,
-	.restore	= pxa27x_cpu_pm_restore,
-	.valid		= pxa27x_cpu_pm_valid,
-	.enter		= pxa27x_cpu_pm_enter,
-	.prepare	= pxa27x_cpu_pm_prepare,
-	.finish		= pxa27x_cpu_pm_finish,
-};
-
-static void __init pxa27x_init_pm(void)
-{
-	pxa_cpu_pm_fns = &pxa27x_cpu_pm_fns;
-}
-#else
-static inline void pxa27x_init_pm(void) {}
-#endif
-
-/* PXA27x:  Various gpios can issue wakeup events.  This logic only
- * handles the simple cases, not the WEMUX2 and WEMUX3 options
- */
-static int pxa27x_set_wake(struct irq_data *d, unsigned int on)
-{
-	int gpio = pxa_irq_to_gpio(d->irq);
-	uint32_t mask;
-
-	if (gpio >= 0 && gpio < 128)
-		return gpio_set_wake(gpio, on);
-
-	if (d->irq == IRQ_KEYPAD)
-		return keypad_set_wake(on);
-
-	switch (d->irq) {
-	case IRQ_RTCAlrm:
-		mask = PWER_RTC;
-		break;
-	case IRQ_USB:
-		mask = 1u << 26;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	if (on)
-		PWER |= mask;
-	else
-		PWER &=~mask;
-
-	return 0;
-}
-
-void __init pxa27x_init_irq(void)
-{
-	pxa_init_irq(34, pxa27x_set_wake);
-}
-
-static struct map_desc pxa27x_io_desc[] __initdata = {
-	{	/* Mem Ctl */
-		.virtual	= (unsigned long)SMEMC_VIRT,
-		.pfn		= __phys_to_pfn(PXA2XX_SMEMC_BASE),
-		.length		= 0x00200000,
-		.type		= MT_DEVICE
-	}, {	/* IMem ctl */
-		.virtual	=  0xfe000000,
-		.pfn		= __phys_to_pfn(0x58000000),
-		.length		= 0x00100000,
-		.type		= MT_DEVICE
-	},
-};
-
-void __init pxa27x_map_io(void)
-{
-	pxa_map_io();
-	iotable_init(ARRAY_AND_SIZE(pxa27x_io_desc));
-	pxa27x_get_clk_frequency_khz(1);
-}
-
-/*
- * device registration specific to PXA27x.
- */
-void __init pxa27x_set_i2c_power_info(struct i2c_pxa_platform_data *info)
-{
-	local_irq_disable();
-	PCFR |= PCFR_PI2CEN;
-	local_irq_enable();
-	pxa_register_device(&pxa27x_device_i2c_power, info);
-}
-
-static struct pxa_gpio_platform_data pxa27x_gpio_info __initdata = {
-	.gpio_set_wake = gpio_set_wake,
-};
-
-static struct platform_device *devices[] __initdata = {
-	&pxa27x_device_udc,
-	&pxa_device_pmu,
-	&pxa_device_i2s,
-	&pxa_device_asoc_ssp1,
-	&pxa_device_asoc_ssp2,
-	&pxa_device_asoc_ssp3,
-	&pxa_device_asoc_platform,
-	&sa1100_device_rtc,
-	&pxa_device_rtc,
-	&pxa27x_device_ssp1,
-	&pxa27x_device_ssp2,
-	&pxa27x_device_ssp3,
-	&pxa27x_device_pwm0,
-	&pxa27x_device_pwm1,
-};
-
-static int __init pxa27x_init(void)
-{
-	int ret = 0;
-
-	if (cpu_is_pxa27x()) {
-
-		reset_status = RCSR;
-
-		clkdev_add_table(pxa27x_clkregs, ARRAY_SIZE(pxa27x_clkregs));
-
-		if ((ret = pxa_init_dma(IRQ_DMA, 32)))
-			return ret;
-
-		pxa27x_init_pm();
-
-		register_syscore_ops(&pxa_irq_syscore_ops);
-		register_syscore_ops(&pxa2xx_mfp_syscore_ops);
-		register_syscore_ops(&pxa2xx_clock_syscore_ops);
-
-		pxa_register_device(&pxa_device_gpio, &pxa27x_gpio_info);
-		ret = platform_add_devices(devices, ARRAY_SIZE(devices));
-	}
-
-	return ret;
-}
-
-postcore_initcall(pxa27x_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/pxa2xx.c b/ANDROID_3.4.5/arch/arm/mach-pxa/pxa2xx.c
deleted file mode 100644
index f8ec8545..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/pxa2xx.c
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * linux/arch/arm/mach-pxa/pxa2xx.c
- *
- * code specific to pxa2xx
- *
- * Copyright (C) 2008 Dmitry Baryshkov
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <mach/pxa2xx-regs.h>
-#include <mach/mfp-pxa25x.h>
-#include <mach/reset.h>
-#include <mach/irda.h>
-
-void pxa2xx_clear_reset_status(unsigned int mask)
-{
-	/* RESET_STATUS_* has a 1:1 mapping with RCSR */
-	RCSR = mask;
-}
-
-static unsigned long pxa2xx_mfp_fir[] = {
-	GPIO46_FICP_RXD,
-	GPIO47_FICP_TXD,
-};
-
-static unsigned long pxa2xx_mfp_sir[] = {
-	GPIO46_STUART_RXD,
-	GPIO47_STUART_TXD,
-};
-
-static unsigned long pxa2xx_mfp_off[] = {
-	GPIO46_GPIO | MFP_LPM_DRIVE_LOW,
-	GPIO47_GPIO | MFP_LPM_DRIVE_LOW,
-};
-
-void pxa2xx_transceiver_mode(struct device *dev, int mode)
-{
-	if (mode & IR_OFF) {
-		pxa2xx_mfp_config(pxa2xx_mfp_off, ARRAY_SIZE(pxa2xx_mfp_off));
-	} else if (mode & IR_SIRMODE) {
-		pxa2xx_mfp_config(pxa2xx_mfp_sir, ARRAY_SIZE(pxa2xx_mfp_sir));
-	} else if (mode & IR_FIRMODE) {
-		pxa2xx_mfp_config(pxa2xx_mfp_fir, ARRAY_SIZE(pxa2xx_mfp_fir));
-	} else
-		BUG();
-}
-EXPORT_SYMBOL_GPL(pxa2xx_transceiver_mode);
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/pxa300.c b/ANDROID_3.4.5/arch/arm/mach-pxa/pxa300.c
deleted file mode 100644
index 17cbc0c7..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/pxa300.c
+++ /dev/null
@@ -1,117 +0,0 @@
-/*
- * linux/arch/arm/mach-pxa/pxa300.c
- *
- * Code specific to PXA300/PXA310
- *
- * Copyright (C) 2007 Marvell Internation Ltd.
- *
- * 2007-08-21: eric miao <eric.miao@marvell.com>
- *             initial version
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <mach/pxa300.h>
-
-#include "generic.h"
-#include "devices.h"
-#include "clock.h"
-
-static struct mfp_addr_map pxa300_mfp_addr_map[] __initdata = {
-
-	MFP_ADDR_X(GPIO0,   GPIO2,   0x00b4),
-	MFP_ADDR_X(GPIO3,   GPIO26,  0x027c),
-	MFP_ADDR_X(GPIO27,  GPIO98,  0x0400),
-	MFP_ADDR_X(GPIO99,  GPIO127, 0x0600),
-	MFP_ADDR_X(GPIO0_2, GPIO1_2, 0x0674),
-	MFP_ADDR_X(GPIO2_2, GPIO6_2, 0x02dc),
-
-	MFP_ADDR(nBE0, 0x0204),
-	MFP_ADDR(nBE1, 0x0208),
-
-	MFP_ADDR(nLUA, 0x0244),
-	MFP_ADDR(nLLA, 0x0254),
-
-	MFP_ADDR(DF_CLE_nOE, 0x0240),
-	MFP_ADDR(DF_nRE_nOE, 0x0200),
-	MFP_ADDR(DF_ALE_nWE, 0x020C),
-	MFP_ADDR(DF_INT_RnB, 0x00C8),
-	MFP_ADDR(DF_nCS0, 0x0248),
-	MFP_ADDR(DF_nCS1, 0x0278),
-	MFP_ADDR(DF_nWE, 0x00CC),
-
-	MFP_ADDR(DF_ADDR0, 0x0210),
-	MFP_ADDR(DF_ADDR1, 0x0214),
-	MFP_ADDR(DF_ADDR2, 0x0218),
-	MFP_ADDR(DF_ADDR3, 0x021C),
-
-	MFP_ADDR(DF_IO0, 0x0220),
-	MFP_ADDR(DF_IO1, 0x0228),
-	MFP_ADDR(DF_IO2, 0x0230),
-	MFP_ADDR(DF_IO3, 0x0238),
-	MFP_ADDR(DF_IO4, 0x0258),
-	MFP_ADDR(DF_IO5, 0x0260),
-	MFP_ADDR(DF_IO6, 0x0268),
-	MFP_ADDR(DF_IO7, 0x0270),
-	MFP_ADDR(DF_IO8, 0x0224),
-	MFP_ADDR(DF_IO9, 0x022C),
-	MFP_ADDR(DF_IO10, 0x0234),
-	MFP_ADDR(DF_IO11, 0x023C),
-	MFP_ADDR(DF_IO12, 0x025C),
-	MFP_ADDR(DF_IO13, 0x0264),
-	MFP_ADDR(DF_IO14, 0x026C),
-	MFP_ADDR(DF_IO15, 0x0274),
-
-	MFP_ADDR_END,
-};
-
-/* override pxa300 MFP register addresses */
-static struct mfp_addr_map pxa310_mfp_addr_map[] __initdata = {
-	MFP_ADDR_X(GPIO30,  GPIO98,   0x0418),
-	MFP_ADDR_X(GPIO7_2, GPIO12_2, 0x052C),
-
-	MFP_ADDR(ULPI_STP, 0x040C),
-	MFP_ADDR(ULPI_NXT, 0x0410),
-	MFP_ADDR(ULPI_DIR, 0x0414),
-
-	MFP_ADDR_END,
-};
-
-static DEFINE_PXA3_CKEN(common_nand, NAND, 156000000, 0);
-static DEFINE_PXA3_CKEN(gcu, PXA300_GCU, 0, 0);
-
-static struct clk_lookup common_clkregs[] = {
-	INIT_CLKREG(&clk_common_nand, "pxa3xx-nand", NULL),
-	INIT_CLKREG(&clk_gcu, "pxa3xx-gcu", NULL),
-};
-
-static DEFINE_PXA3_CKEN(pxa310_mmc3, MMC3, 19500000, 0);
-
-static struct clk_lookup pxa310_clkregs[] = {
-	INIT_CLKREG(&clk_pxa310_mmc3, "pxa2xx-mci.2", NULL),
-};
-
-static int __init pxa300_init(void)
-{
-	if (cpu_is_pxa300() || cpu_is_pxa310()) {
-		mfp_init_base(io_p2v(MFPR_BASE));
-		mfp_init_addr(pxa300_mfp_addr_map);
-		clkdev_add_table(ARRAY_AND_SIZE(common_clkregs));
-	}
-
-	if (cpu_is_pxa310()) {
-		mfp_init_addr(pxa310_mfp_addr_map);
-		clkdev_add_table(ARRAY_AND_SIZE(pxa310_clkregs));
-	}
-
-	return 0;
-}
-
-core_initcall(pxa300_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/pxa320.c b/ANDROID_3.4.5/arch/arm/mach-pxa/pxa320.c
deleted file mode 100644
index 6dc99d4f..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/pxa320.c
+++ /dev/null
@@ -1,100 +0,0 @@
-/*
- * linux/arch/arm/mach-pxa/pxa320.c
- *
- * Code specific to PXA320
- *
- * Copyright (C) 2007 Marvell Internation Ltd.
- *
- * 2007-08-21: eric miao <eric.miao@marvell.com>
- *             initial version
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <mach/pxa320.h>
-
-#include "generic.h"
-#include "devices.h"
-#include "clock.h"
-
-static struct mfp_addr_map pxa320_mfp_addr_map[] __initdata = {
-
-	MFP_ADDR_X(GPIO0,  GPIO4,   0x0124),
-	MFP_ADDR_X(GPIO5,  GPIO9,   0x028C),
-	MFP_ADDR(GPIO10, 0x0458),
-	MFP_ADDR_X(GPIO11, GPIO26,  0x02A0),
-	MFP_ADDR_X(GPIO27, GPIO48,  0x0400),
-	MFP_ADDR_X(GPIO49, GPIO62,  0x045C),
-	MFP_ADDR_X(GPIO63, GPIO73,  0x04B4),
-	MFP_ADDR_X(GPIO74, GPIO98,  0x04F0),
-	MFP_ADDR_X(GPIO99, GPIO127, 0x0600),
-	MFP_ADDR_X(GPIO0_2,  GPIO5_2,   0x0674),
-	MFP_ADDR_X(GPIO6_2,  GPIO13_2,  0x0494),
-	MFP_ADDR_X(GPIO14_2, GPIO17_2, 0x04E0),
-
-	MFP_ADDR(nXCVREN, 0x0138),
-	MFP_ADDR(DF_CLE_nOE, 0x0204),
-	MFP_ADDR(DF_nADV1_ALE, 0x0208),
-	MFP_ADDR(DF_SCLK_S, 0x020C),
-	MFP_ADDR(DF_SCLK_E, 0x0210),
-	MFP_ADDR(nBE0, 0x0214),
-	MFP_ADDR(nBE1, 0x0218),
-	MFP_ADDR(DF_nADV2_ALE, 0x021C),
-	MFP_ADDR(DF_INT_RnB, 0x0220),
-	MFP_ADDR(DF_nCS0, 0x0224),
-	MFP_ADDR(DF_nCS1, 0x0228),
-	MFP_ADDR(DF_nWE, 0x022C),
-	MFP_ADDR(DF_nRE_nOE, 0x0230),
-	MFP_ADDR(nLUA, 0x0234),
-	MFP_ADDR(nLLA, 0x0238),
-	MFP_ADDR(DF_ADDR0, 0x023C),
-	MFP_ADDR(DF_ADDR1, 0x0240),
-	MFP_ADDR(DF_ADDR2, 0x0244),
-	MFP_ADDR(DF_ADDR3, 0x0248),
-	MFP_ADDR(DF_IO0, 0x024C),
-	MFP_ADDR(DF_IO8, 0x0250),
-	MFP_ADDR(DF_IO1, 0x0254),
-	MFP_ADDR(DF_IO9, 0x0258),
-	MFP_ADDR(DF_IO2, 0x025C),
-	MFP_ADDR(DF_IO10, 0x0260),
-	MFP_ADDR(DF_IO3, 0x0264),
-	MFP_ADDR(DF_IO11, 0x0268),
-	MFP_ADDR(DF_IO4, 0x026C),
-	MFP_ADDR(DF_IO12, 0x0270),
-	MFP_ADDR(DF_IO5, 0x0274),
-	MFP_ADDR(DF_IO13, 0x0278),
-	MFP_ADDR(DF_IO6, 0x027C),
-	MFP_ADDR(DF_IO14, 0x0280),
-	MFP_ADDR(DF_IO7, 0x0284),
-	MFP_ADDR(DF_IO15, 0x0288),
-
-	MFP_ADDR_END,
-};
-
-static DEFINE_PXA3_CKEN(pxa320_nand, NAND, 104000000, 0);
-static DEFINE_PXA3_CKEN(gcu, PXA320_GCU, 0, 0);
-
-static struct clk_lookup pxa320_clkregs[] = {
-	INIT_CLKREG(&clk_pxa320_nand, "pxa3xx-nand", NULL),
-	INIT_CLKREG(&clk_gcu, "pxa3xx-gcu", NULL),
-};
-
-static int __init pxa320_init(void)
-{
-	if (cpu_is_pxa320()) {
-		mfp_init_base(io_p2v(MFPR_BASE));
-		mfp_init_addr(pxa320_mfp_addr_map);
-		clkdev_add_table(ARRAY_AND_SIZE(pxa320_clkregs));
-	}
-
-	return 0;
-}
-
-core_initcall(pxa320_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/pxa3xx-ulpi.c b/ANDROID_3.4.5/arch/arm/mach-pxa/pxa3xx-ulpi.c
deleted file mode 100644
index 5ead6d48..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/pxa3xx-ulpi.c
+++ /dev/null
@@ -1,402 +0,0 @@
-/*
- * linux/arch/arm/mach-pxa/pxa3xx-ulpi.c
- *
- * code specific to pxa3xx aka Monahans
- *
- * Copyright (C) 2010 CompuLab Ltd.
- *
- * 2010-13-07: Igor Grinberg <grinberg@compulab.co.il>
- *             initial version: pxa310 USB Host mode support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/usb.h>
-#include <linux/usb/otg.h>
-
-#include <mach/hardware.h>
-#include <mach/regs-u2d.h>
-#include <mach/pxa3xx-u2d.h>
-
-struct pxa3xx_u2d_ulpi {
-	struct clk		*clk;
-	void __iomem		*mmio_base;
-
-	struct usb_phy		*otg;
-	unsigned int		ulpi_mode;
-};
-
-static struct pxa3xx_u2d_ulpi *u2d;
-
-static inline u32 u2d_readl(u32 reg)
-{
-	return __raw_readl(u2d->mmio_base + reg);
-}
-
-static inline void u2d_writel(u32 reg, u32 val)
-{
-	__raw_writel(val, u2d->mmio_base + reg);
-}
-
-#if defined(CONFIG_PXA310_ULPI)
-enum u2d_ulpi_phy_mode {
-	SYNCH		= 0,
-	CARKIT		= (1 << 0),
-	SER_3PIN	= (1 << 1),
-	SER_6PIN	= (1 << 2),
-	LOWPOWER	= (1 << 3),
-};
-
-static inline enum u2d_ulpi_phy_mode pxa310_ulpi_get_phymode(void)
-{
-	return (u2d_readl(U2DOTGUSR) >> 28) & 0xF;
-}
-
-static int pxa310_ulpi_poll(void)
-{
-	int timeout = 50000;
-
-	while (timeout--) {
-		if (!(u2d_readl(U2DOTGUCR) & U2DOTGUCR_RUN))
-			return 0;
-
-		cpu_relax();
-	}
-
-	pr_warning("%s: ULPI access timed out!\n", __func__);
-
-	return -ETIMEDOUT;
-}
-
-static int pxa310_ulpi_read(struct usb_phy *otg, u32 reg)
-{
-	int err;
-
-	if (pxa310_ulpi_get_phymode() != SYNCH) {
-		pr_warning("%s: PHY is not in SYNCH mode!\n", __func__);
-		return -EBUSY;
-	}
-
-	u2d_writel(U2DOTGUCR, U2DOTGUCR_RUN | U2DOTGUCR_RNW | (reg << 16));
-	msleep(5);
-
-	err = pxa310_ulpi_poll();
-	if (err)
-		return err;
-
-	return u2d_readl(U2DOTGUCR) & U2DOTGUCR_RDATA;
-}
-
-static int pxa310_ulpi_write(struct usb_phy *otg, u32 val, u32 reg)
-{
-	if (pxa310_ulpi_get_phymode() != SYNCH) {
-		pr_warning("%s: PHY is not in SYNCH mode!\n", __func__);
-		return -EBUSY;
-	}
-
-	u2d_writel(U2DOTGUCR, U2DOTGUCR_RUN | (reg << 16) | (val << 8));
-	msleep(5);
-
-	return pxa310_ulpi_poll();
-}
-
-struct usb_phy_io_ops pxa310_ulpi_access_ops = {
-	.read	= pxa310_ulpi_read,
-	.write	= pxa310_ulpi_write,
-};
-
-static void pxa310_otg_transceiver_rtsm(void)
-{
-	u32 u2dotgcr;
-
-	/* put PHY to sync mode */
-	u2dotgcr = u2d_readl(U2DOTGCR);
-	u2dotgcr |=  U2DOTGCR_RTSM | U2DOTGCR_UTMID;
-	u2d_writel(U2DOTGCR, u2dotgcr);
-	msleep(10);
-
-	/* setup OTG sync mode */
-	u2dotgcr = u2d_readl(U2DOTGCR);
-	u2dotgcr |= U2DOTGCR_ULAF;
-	u2dotgcr &= ~(U2DOTGCR_SMAF | U2DOTGCR_CKAF);
-	u2d_writel(U2DOTGCR, u2dotgcr);
-}
-
-static int pxa310_start_otg_host_transcvr(struct usb_bus *host)
-{
-	int err;
-
-	pxa310_otg_transceiver_rtsm();
-
-	err = usb_phy_init(u2d->otg);
-	if (err) {
-		pr_err("OTG transceiver init failed");
-		return err;
-	}
-
-	err = otg_set_vbus(u2d->otg->otg, 1);
-	if (err) {
-		pr_err("OTG transceiver VBUS set failed");
-		return err;
-	}
-
-	err = otg_set_host(u2d->otg->otg, host);
-	if (err)
-		pr_err("OTG transceiver Host mode set failed");
-
-	return err;
-}
-
-static int pxa310_start_otg_hc(struct usb_bus *host)
-{
-	u32 u2dotgcr;
-	int err;
-
-	/* disable USB device controller */
-	u2d_writel(U2DCR, u2d_readl(U2DCR) & ~U2DCR_UDE);
-	u2d_writel(U2DOTGCR, u2d_readl(U2DOTGCR) | U2DOTGCR_UTMID);
-	u2d_writel(U2DOTGICR, u2d_readl(U2DOTGICR) & ~0x37F7F);
-
-	err = pxa310_start_otg_host_transcvr(host);
-	if (err)
-		return err;
-
-	/* set xceiver mode */
-	if (u2d->ulpi_mode & ULPI_IC_6PIN_SERIAL)
-		u2d_writel(U2DP3CR, u2d_readl(U2DP3CR) & ~U2DP3CR_P2SS);
-	else if (u2d->ulpi_mode & ULPI_IC_3PIN_SERIAL)
-		u2d_writel(U2DP3CR, u2d_readl(U2DP3CR) | U2DP3CR_P2SS);
-
-	/* start OTG host controller */
-	u2dotgcr = u2d_readl(U2DOTGCR) | U2DOTGCR_SMAF;
-	u2d_writel(U2DOTGCR, u2dotgcr & ~(U2DOTGCR_ULAF | U2DOTGCR_CKAF));
-
-	return 0;
-}
-
-static void pxa310_stop_otg_hc(void)
-{
-	pxa310_otg_transceiver_rtsm();
-
-	otg_set_host(u2d->otg->otg, NULL);
-	otg_set_vbus(u2d->otg->otg, 0);
-	usb_phy_shutdown(u2d->otg);
-}
-
-static void pxa310_u2d_setup_otg_hc(void)
-{
-	u32 u2dotgcr;
-
-	u2dotgcr = u2d_readl(U2DOTGCR);
-	u2dotgcr |= U2DOTGCR_ULAF | U2DOTGCR_UTMID;
-	u2dotgcr &= ~(U2DOTGCR_SMAF | U2DOTGCR_CKAF);
-	u2d_writel(U2DOTGCR, u2dotgcr);
-	msleep(5);
-	u2d_writel(U2DOTGCR, u2dotgcr | U2DOTGCR_ULE);
-	msleep(5);
-	u2d_writel(U2DOTGICR, u2d_readl(U2DOTGICR) & ~0x37F7F);
-}
-
-static int pxa310_otg_init(struct pxa3xx_u2d_platform_data *pdata)
-{
-	unsigned int ulpi_mode = ULPI_OTG_DRVVBUS;
-
-	if (pdata) {
-		if (pdata->ulpi_mode & ULPI_SER_6PIN)
-			ulpi_mode |= ULPI_IC_6PIN_SERIAL;
-		else if (pdata->ulpi_mode & ULPI_SER_3PIN)
-			ulpi_mode |= ULPI_IC_3PIN_SERIAL;
-	}
-
-	u2d->ulpi_mode = ulpi_mode;
-
-	u2d->otg = otg_ulpi_create(&pxa310_ulpi_access_ops, ulpi_mode);
-	if (!u2d->otg)
-		return -ENOMEM;
-
-	u2d->otg->io_priv = u2d->mmio_base;
-
-	return 0;
-}
-
-static void pxa310_otg_exit(void)
-{
-	kfree(u2d->otg);
-}
-#else
-static inline void pxa310_u2d_setup_otg_hc(void) {}
-static inline int pxa310_start_otg_hc(struct usb_bus *host)
-{
-	return 0;
-}
-static inline void pxa310_stop_otg_hc(void) {}
-static inline int pxa310_otg_init(struct pxa3xx_u2d_platform_data *pdata)
-{
-	return 0;
-}
-static inline void pxa310_otg_exit(void) {}
-#endif /* CONFIG_PXA310_ULPI */
-
-int pxa3xx_u2d_start_hc(struct usb_bus *host)
-{
-	int err = 0;
-
-	/* In case the PXA3xx ULPI isn't used, do nothing. */
-	if (!u2d)
-		return 0;
-
-	clk_enable(u2d->clk);
-
-	if (cpu_is_pxa310()) {
-		pxa310_u2d_setup_otg_hc();
-		err = pxa310_start_otg_hc(host);
-	}
-
-	return err;
-}
-EXPORT_SYMBOL_GPL(pxa3xx_u2d_start_hc);
-
-void pxa3xx_u2d_stop_hc(struct usb_bus *host)
-{
-	/* In case the PXA3xx ULPI isn't used, do nothing. */
-	if (!u2d)
-		return;
-
-	if (cpu_is_pxa310())
-		pxa310_stop_otg_hc();
-
-	clk_disable(u2d->clk);
-}
-EXPORT_SYMBOL_GPL(pxa3xx_u2d_stop_hc);
-
-static int pxa3xx_u2d_probe(struct platform_device *pdev)
-{
-	struct pxa3xx_u2d_platform_data *pdata = pdev->dev.platform_data;
-	struct resource *r;
-	int err;
-
-	u2d = kzalloc(sizeof(struct pxa3xx_u2d_ulpi), GFP_KERNEL);
-	if (!u2d) {
-		dev_err(&pdev->dev, "failed to allocate memory\n");
-		return -ENOMEM;
-	}
-
-	u2d->clk = clk_get(&pdev->dev, NULL);
-	if (IS_ERR(u2d->clk)) {
-		dev_err(&pdev->dev, "failed to get u2d clock\n");
-		err = PTR_ERR(u2d->clk);
-		goto err_free_mem;
-	}
-
-	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!r) {
-		dev_err(&pdev->dev, "no IO memory resource defined\n");
-		err = -ENODEV;
-		goto err_put_clk;
-	}
-
-        r = request_mem_region(r->start, resource_size(r), pdev->name);
-        if (!r) {
-                dev_err(&pdev->dev, "failed to request memory resource\n");
-                err = -EBUSY;
-                goto err_put_clk;
-        }
-
-	u2d->mmio_base = ioremap(r->start, resource_size(r));
-	if (!u2d->mmio_base) {
-		dev_err(&pdev->dev, "ioremap() failed\n");
-		err = -ENODEV;
-		goto err_free_res;
-	}
-
-	if (pdata->init) {
-		err = pdata->init(&pdev->dev);
-		if (err)
-			goto err_free_io;
-	}
-
-	/* Only PXA310 U2D has OTG functionality */
-	if (cpu_is_pxa310()) {
-		err = pxa310_otg_init(pdata);
-		if (err)
-			goto err_free_plat;
-	}
-
-	platform_set_drvdata(pdev, &u2d);
-
-	return 0;
-
-err_free_plat:
-	if (pdata->exit)
-		pdata->exit(&pdev->dev);
-err_free_io:
-	iounmap(u2d->mmio_base);
-err_free_res:
-	release_mem_region(r->start, resource_size(r));
-err_put_clk:
-	clk_put(u2d->clk);
-err_free_mem:
-	kfree(u2d);
-	return err;
-}
-
-static int pxa3xx_u2d_remove(struct platform_device *pdev)
-{
-	struct pxa3xx_u2d_platform_data *pdata = pdev->dev.platform_data;
-	struct resource *r;
-
-	if (cpu_is_pxa310()) {
-		pxa310_stop_otg_hc();
-		pxa310_otg_exit();
-	}
-
-	if (pdata->exit)
-		pdata->exit(&pdev->dev);
-
-	platform_set_drvdata(pdev, NULL);
-	iounmap(u2d->mmio_base);
-	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	release_mem_region(r->start, resource_size(r));
-
-	clk_put(u2d->clk);
-
-	kfree(u2d);
-
-	return 0;
-}
-
-static struct platform_driver pxa3xx_u2d_ulpi_driver = {
-        .driver		= {
-                .name   = "pxa3xx-u2d",
-		.owner	= THIS_MODULE,
-        },
-        .probe          = pxa3xx_u2d_probe,
-        .remove         = pxa3xx_u2d_remove,
-};
-
-static int pxa3xx_u2d_ulpi_init(void)
-{
-	return platform_driver_register(&pxa3xx_u2d_ulpi_driver);
-}
-module_init(pxa3xx_u2d_ulpi_init);
-
-static void __exit pxa3xx_u2d_ulpi_exit(void)
-{
-	platform_driver_unregister(&pxa3xx_u2d_ulpi_driver);
-}
-module_exit(pxa3xx_u2d_ulpi_exit);
-
-MODULE_DESCRIPTION("PXA3xx U2D ULPI driver");
-MODULE_AUTHOR("Igor Grinberg");
-MODULE_LICENSE("GPL v2");
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/pxa3xx.c b/ANDROID_3.4.5/arch/arm/mach-pxa/pxa3xx.c
deleted file mode 100644
index dffb7e81..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/pxa3xx.c
+++ /dev/null
@@ -1,475 +0,0 @@
-/*
- * linux/arch/arm/mach-pxa/pxa3xx.c
- *
- * code specific to pxa3xx aka Monahans
- *
- * Copyright (C) 2006 Marvell International Ltd.
- *
- * 2007-09-02: eric miao <eric.miao@marvell.com>
- *             initial version
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/pm.h>
-#include <linux/platform_device.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/syscore_ops.h>
-#include <linux/i2c/pxa-i2c.h>
-
-#include <asm/mach/map.h>
-#include <asm/suspend.h>
-#include <mach/hardware.h>
-#include <mach/pxa3xx-regs.h>
-#include <mach/reset.h>
-#include <mach/ohci.h>
-#include <mach/pm.h>
-#include <mach/dma.h>
-#include <mach/smemc.h>
-#include <mach/irqs.h>
-
-#include "generic.h"
-#include "devices.h"
-#include "clock.h"
-
-#define PECR_IE(n)	((1 << ((n) * 2)) << 28)
-#define PECR_IS(n)	((1 << ((n) * 2)) << 29)
-
-static DEFINE_PXA3_CKEN(pxa3xx_ffuart, FFUART, 14857000, 1);
-static DEFINE_PXA3_CKEN(pxa3xx_btuart, BTUART, 14857000, 1);
-static DEFINE_PXA3_CKEN(pxa3xx_stuart, STUART, 14857000, 1);
-static DEFINE_PXA3_CKEN(pxa3xx_i2c, I2C, 32842000, 0);
-static DEFINE_PXA3_CKEN(pxa3xx_udc, UDC, 48000000, 5);
-static DEFINE_PXA3_CKEN(pxa3xx_usbh, USBH, 48000000, 0);
-static DEFINE_PXA3_CKEN(pxa3xx_u2d, USB2, 48000000, 0);
-static DEFINE_PXA3_CKEN(pxa3xx_keypad, KEYPAD, 32768, 0);
-static DEFINE_PXA3_CKEN(pxa3xx_ssp1, SSP1, 13000000, 0);
-static DEFINE_PXA3_CKEN(pxa3xx_ssp2, SSP2, 13000000, 0);
-static DEFINE_PXA3_CKEN(pxa3xx_ssp3, SSP3, 13000000, 0);
-static DEFINE_PXA3_CKEN(pxa3xx_ssp4, SSP4, 13000000, 0);
-static DEFINE_PXA3_CKEN(pxa3xx_pwm0, PWM0, 13000000, 0);
-static DEFINE_PXA3_CKEN(pxa3xx_pwm1, PWM1, 13000000, 0);
-static DEFINE_PXA3_CKEN(pxa3xx_mmc1, MMC1, 19500000, 0);
-static DEFINE_PXA3_CKEN(pxa3xx_mmc2, MMC2, 19500000, 0);
-static DEFINE_PXA3_CKEN(pxa3xx_gpio, GPIO, 13000000, 0);
-
-static DEFINE_CK(pxa3xx_lcd, LCD, &clk_pxa3xx_hsio_ops);
-static DEFINE_CK(pxa3xx_smemc, SMC, &clk_pxa3xx_smemc_ops);
-static DEFINE_CK(pxa3xx_camera, CAMERA, &clk_pxa3xx_hsio_ops);
-static DEFINE_CK(pxa3xx_ac97, AC97, &clk_pxa3xx_ac97_ops);
-static DEFINE_CLK(pxa3xx_pout, &clk_pxa3xx_pout_ops, 13000000, 70);
-
-static struct clk_lookup pxa3xx_clkregs[] = {
-	INIT_CLKREG(&clk_pxa3xx_pout, NULL, "CLK_POUT"),
-	/* Power I2C clock is always on */
-	INIT_CLKREG(&clk_dummy, "pxa3xx-pwri2c.1", NULL),
-	INIT_CLKREG(&clk_pxa3xx_lcd, "pxa2xx-fb", NULL),
-	INIT_CLKREG(&clk_pxa3xx_camera, NULL, "CAMCLK"),
-	INIT_CLKREG(&clk_pxa3xx_ac97, NULL, "AC97CLK"),
-	INIT_CLKREG(&clk_pxa3xx_ffuart, "pxa2xx-uart.0", NULL),
-	INIT_CLKREG(&clk_pxa3xx_btuart, "pxa2xx-uart.1", NULL),
-	INIT_CLKREG(&clk_pxa3xx_stuart, "pxa2xx-uart.2", NULL),
-	INIT_CLKREG(&clk_pxa3xx_stuart, "pxa2xx-ir", "UARTCLK"),
-	INIT_CLKREG(&clk_pxa3xx_i2c, "pxa2xx-i2c.0", NULL),
-	INIT_CLKREG(&clk_pxa3xx_udc, "pxa27x-udc", NULL),
-	INIT_CLKREG(&clk_pxa3xx_usbh, "pxa27x-ohci", NULL),
-	INIT_CLKREG(&clk_pxa3xx_u2d, "pxa3xx-u2d", NULL),
-	INIT_CLKREG(&clk_pxa3xx_keypad, "pxa27x-keypad", NULL),
-	INIT_CLKREG(&clk_pxa3xx_ssp1, "pxa27x-ssp.0", NULL),
-	INIT_CLKREG(&clk_pxa3xx_ssp2, "pxa27x-ssp.1", NULL),
-	INIT_CLKREG(&clk_pxa3xx_ssp3, "pxa27x-ssp.2", NULL),
-	INIT_CLKREG(&clk_pxa3xx_ssp4, "pxa27x-ssp.3", NULL),
-	INIT_CLKREG(&clk_pxa3xx_pwm0, "pxa27x-pwm.0", NULL),
-	INIT_CLKREG(&clk_pxa3xx_pwm1, "pxa27x-pwm.1", NULL),
-	INIT_CLKREG(&clk_pxa3xx_mmc1, "pxa2xx-mci.0", NULL),
-	INIT_CLKREG(&clk_pxa3xx_mmc2, "pxa2xx-mci.1", NULL),
-	INIT_CLKREG(&clk_pxa3xx_smemc, "pxa2xx-pcmcia", NULL),
-	INIT_CLKREG(&clk_pxa3xx_gpio, "pxa-gpio", NULL),
-	INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL),
-};
-
-#ifdef CONFIG_PM
-
-#define ISRAM_START	0x5c000000
-#define ISRAM_SIZE	SZ_256K
-
-static void __iomem *sram;
-static unsigned long wakeup_src;
-
-/*
- * Enter a standby mode (S0D1C2 or S0D2C2).  Upon wakeup, the dynamic
- * memory controller has to be reinitialised, so we place some code
- * in the SRAM to perform this function.
- *
- * We disable FIQs across the standby - otherwise, we might receive a
- * FIQ while the SDRAM is unavailable.
- */
-static void pxa3xx_cpu_standby(unsigned int pwrmode)
-{
-	extern const char pm_enter_standby_start[], pm_enter_standby_end[];
-	void (*fn)(unsigned int) = (void __force *)(sram + 0x8000);
-
-	memcpy_toio(sram + 0x8000, pm_enter_standby_start,
-		    pm_enter_standby_end - pm_enter_standby_start);
-
-	AD2D0SR = ~0;
-	AD2D1SR = ~0;
-	AD2D0ER = wakeup_src;
-	AD2D1ER = 0;
-	ASCR = ASCR;
-	ARSR = ARSR;
-
-	local_fiq_disable();
-	fn(pwrmode);
-	local_fiq_enable();
-
-	AD2D0ER = 0;
-	AD2D1ER = 0;
-}
-
-/*
- * NOTE:  currently, the OBM (OEM Boot Module) binary comes along with
- * PXA3xx development kits assumes that the resuming process continues
- * with the address stored within the first 4 bytes of SDRAM. The PSPR
- * register is used privately by BootROM and OBM, and _must_ be set to
- * 0x5c014000 for the moment.
- */
-static void pxa3xx_cpu_pm_suspend(void)
-{
-	volatile unsigned long *p = (volatile void *)0xc0000000;
-	unsigned long saved_data = *p;
-#ifndef CONFIG_IWMMXT
-	u64 acc0;
-
-	asm volatile("mra %Q0, %R0, acc0" : "=r" (acc0));
-#endif
-
-	extern int pxa3xx_finish_suspend(unsigned long);
-
-	/* resuming from D2 requires the HSIO2/BOOT/TPM clocks enabled */
-	CKENA |= (1 << CKEN_BOOT) | (1 << CKEN_TPM);
-	CKENB |= 1 << (CKEN_HSIO2 & 0x1f);
-
-	/* clear and setup wakeup source */
-	AD3SR = ~0;
-	AD3ER = wakeup_src;
-	ASCR = ASCR;
-	ARSR = ARSR;
-
-	PCFR |= (1u << 13);			/* L1_DIS */
-	PCFR &= ~((1u << 12) | (1u << 1));	/* L0_EN | SL_ROD */
-
-	PSPR = 0x5c014000;
-
-	/* overwrite with the resume address */
-	*p = virt_to_phys(cpu_resume);
-
-	cpu_suspend(0, pxa3xx_finish_suspend);
-
-	*p = saved_data;
-
-	AD3ER = 0;
-
-#ifndef CONFIG_IWMMXT
-	asm volatile("mar acc0, %Q0, %R0" : "=r" (acc0));
-#endif
-}
-
-static void pxa3xx_cpu_pm_enter(suspend_state_t state)
-{
-	/*
-	 * Don't sleep if no wakeup sources are defined
-	 */
-	if (wakeup_src == 0) {
-		printk(KERN_ERR "Not suspending: no wakeup sources\n");
-		return;
-	}
-
-	switch (state) {
-	case PM_SUSPEND_STANDBY:
-		pxa3xx_cpu_standby(PXA3xx_PM_S0D2C2);
-		break;
-
-	case PM_SUSPEND_MEM:
-		pxa3xx_cpu_pm_suspend();
-		break;
-	}
-}
-
-static int pxa3xx_cpu_pm_valid(suspend_state_t state)
-{
-	return state == PM_SUSPEND_MEM || state == PM_SUSPEND_STANDBY;
-}
-
-static struct pxa_cpu_pm_fns pxa3xx_cpu_pm_fns = {
-	.valid		= pxa3xx_cpu_pm_valid,
-	.enter		= pxa3xx_cpu_pm_enter,
-};
-
-static void __init pxa3xx_init_pm(void)
-{
-	sram = ioremap(ISRAM_START, ISRAM_SIZE);
-	if (!sram) {
-		printk(KERN_ERR "Unable to map ISRAM: disabling standby/suspend\n");
-		return;
-	}
-
-	/*
-	 * Since we copy wakeup code into the SRAM, we need to ensure
-	 * that it is preserved over the low power modes.  Note: bit 8
-	 * is undocumented in the developer manual, but must be set.
-	 */
-	AD1R |= ADXR_L2 | ADXR_R0;
-	AD2R |= ADXR_L2 | ADXR_R0;
-	AD3R |= ADXR_L2 | ADXR_R0;
-
-	/*
-	 * Clear the resume enable registers.
-	 */
-	AD1D0ER = 0;
-	AD2D0ER = 0;
-	AD2D1ER = 0;
-	AD3ER = 0;
-
-	pxa_cpu_pm_fns = &pxa3xx_cpu_pm_fns;
-}
-
-static int pxa3xx_set_wake(struct irq_data *d, unsigned int on)
-{
-	unsigned long flags, mask = 0;
-
-	switch (d->irq) {
-	case IRQ_SSP3:
-		mask = ADXER_MFP_WSSP3;
-		break;
-	case IRQ_MSL:
-		mask = ADXER_WMSL0;
-		break;
-	case IRQ_USBH2:
-	case IRQ_USBH1:
-		mask = ADXER_WUSBH;
-		break;
-	case IRQ_KEYPAD:
-		mask = ADXER_WKP;
-		break;
-	case IRQ_AC97:
-		mask = ADXER_MFP_WAC97;
-		break;
-	case IRQ_USIM:
-		mask = ADXER_WUSIM0;
-		break;
-	case IRQ_SSP2:
-		mask = ADXER_MFP_WSSP2;
-		break;
-	case IRQ_I2C:
-		mask = ADXER_MFP_WI2C;
-		break;
-	case IRQ_STUART:
-		mask = ADXER_MFP_WUART3;
-		break;
-	case IRQ_BTUART:
-		mask = ADXER_MFP_WUART2;
-		break;
-	case IRQ_FFUART:
-		mask = ADXER_MFP_WUART1;
-		break;
-	case IRQ_MMC:
-		mask = ADXER_MFP_WMMC1;
-		break;
-	case IRQ_SSP:
-		mask = ADXER_MFP_WSSP1;
-		break;
-	case IRQ_RTCAlrm:
-		mask = ADXER_WRTC;
-		break;
-	case IRQ_SSP4:
-		mask = ADXER_MFP_WSSP4;
-		break;
-	case IRQ_TSI:
-		mask = ADXER_WTSI;
-		break;
-	case IRQ_USIM2:
-		mask = ADXER_WUSIM1;
-		break;
-	case IRQ_MMC2:
-		mask = ADXER_MFP_WMMC2;
-		break;
-	case IRQ_NAND:
-		mask = ADXER_MFP_WFLASH;
-		break;
-	case IRQ_USB2:
-		mask = ADXER_WUSB2;
-		break;
-	case IRQ_WAKEUP0:
-		mask = ADXER_WEXTWAKE0;
-		break;
-	case IRQ_WAKEUP1:
-		mask = ADXER_WEXTWAKE1;
-		break;
-	case IRQ_MMC3:
-		mask = ADXER_MFP_GEN12;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	local_irq_save(flags);
-	if (on)
-		wakeup_src |= mask;
-	else
-		wakeup_src &= ~mask;
-	local_irq_restore(flags);
-
-	return 0;
-}
-#else
-static inline void pxa3xx_init_pm(void) {}
-#define pxa3xx_set_wake	NULL
-#endif
-
-static void pxa_ack_ext_wakeup(struct irq_data *d)
-{
-	PECR |= PECR_IS(d->irq - IRQ_WAKEUP0);
-}
-
-static void pxa_mask_ext_wakeup(struct irq_data *d)
-{
-	pxa_mask_irq(d);
-	PECR &= ~PECR_IE(d->irq - IRQ_WAKEUP0);
-}
-
-static void pxa_unmask_ext_wakeup(struct irq_data *d)
-{
-	pxa_unmask_irq(d);
-	PECR |= PECR_IE(d->irq - IRQ_WAKEUP0);
-}
-
-static int pxa_set_ext_wakeup_type(struct irq_data *d, unsigned int flow_type)
-{
-	if (flow_type & IRQ_TYPE_EDGE_RISING)
-		PWER |= 1 << (d->irq - IRQ_WAKEUP0);
-
-	if (flow_type & IRQ_TYPE_EDGE_FALLING)
-		PWER |= 1 << (d->irq - IRQ_WAKEUP0 + 2);
-
-	return 0;
-}
-
-static struct irq_chip pxa_ext_wakeup_chip = {
-	.name		= "WAKEUP",
-	.irq_ack	= pxa_ack_ext_wakeup,
-	.irq_mask	= pxa_mask_ext_wakeup,
-	.irq_unmask	= pxa_unmask_ext_wakeup,
-	.irq_set_type	= pxa_set_ext_wakeup_type,
-};
-
-static void __init pxa_init_ext_wakeup_irq(int (*fn)(struct irq_data *,
-					   unsigned int))
-{
-	int irq;
-
-	for (irq = IRQ_WAKEUP0; irq <= IRQ_WAKEUP1; irq++) {
-		irq_set_chip_and_handler(irq, &pxa_ext_wakeup_chip,
-					 handle_edge_irq);
-		set_irq_flags(irq, IRQF_VALID);
-	}
-
-	pxa_ext_wakeup_chip.irq_set_wake = fn;
-}
-
-void __init pxa3xx_init_irq(void)
-{
-	/* enable CP6 access */
-	u32 value;
-	__asm__ __volatile__("mrc p15, 0, %0, c15, c1, 0\n": "=r"(value));
-	value |= (1 << 6);
-	__asm__ __volatile__("mcr p15, 0, %0, c15, c1, 0\n": :"r"(value));
-
-	pxa_init_irq(56, pxa3xx_set_wake);
-	pxa_init_ext_wakeup_irq(pxa3xx_set_wake);
-}
-
-static struct map_desc pxa3xx_io_desc[] __initdata = {
-	{	/* Mem Ctl */
-		.virtual	= (unsigned long)SMEMC_VIRT,
-		.pfn		= __phys_to_pfn(PXA3XX_SMEMC_BASE),
-		.length		= 0x00200000,
-		.type		= MT_DEVICE
-	}
-};
-
-void __init pxa3xx_map_io(void)
-{
-	pxa_map_io();
-	iotable_init(ARRAY_AND_SIZE(pxa3xx_io_desc));
-	pxa3xx_get_clk_frequency_khz(1);
-}
-
-/*
- * device registration specific to PXA3xx.
- */
-
-void __init pxa3xx_set_i2c_power_info(struct i2c_pxa_platform_data *info)
-{
-	pxa_register_device(&pxa3xx_device_i2c_power, info);
-}
-
-static struct platform_device *devices[] __initdata = {
-	&pxa_device_gpio,
-	&pxa27x_device_udc,
-	&pxa_device_pmu,
-	&pxa_device_i2s,
-	&pxa_device_asoc_ssp1,
-	&pxa_device_asoc_ssp2,
-	&pxa_device_asoc_ssp3,
-	&pxa_device_asoc_ssp4,
-	&pxa_device_asoc_platform,
-	&sa1100_device_rtc,
-	&pxa_device_rtc,
-	&pxa27x_device_ssp1,
-	&pxa27x_device_ssp2,
-	&pxa27x_device_ssp3,
-	&pxa3xx_device_ssp4,
-	&pxa27x_device_pwm0,
-	&pxa27x_device_pwm1,
-};
-
-static int __init pxa3xx_init(void)
-{
-	int ret = 0;
-
-	if (cpu_is_pxa3xx()) {
-
-		reset_status = ARSR;
-
-		/*
-		 * clear RDH bit every time after reset
-		 *
-		 * Note: the last 3 bits DxS are write-1-to-clear so carefully
-		 * preserve them here in case they will be referenced later
-		 */
-		ASCR &= ~(ASCR_RDH | ASCR_D1S | ASCR_D2S | ASCR_D3S);
-
-		clkdev_add_table(pxa3xx_clkregs, ARRAY_SIZE(pxa3xx_clkregs));
-
-		if ((ret = pxa_init_dma(IRQ_DMA, 32)))
-			return ret;
-
-		pxa3xx_init_pm();
-
-		register_syscore_ops(&pxa_irq_syscore_ops);
-		register_syscore_ops(&pxa3xx_mfp_syscore_ops);
-		register_syscore_ops(&pxa3xx_clock_syscore_ops);
-
-		ret = platform_add_devices(devices, ARRAY_SIZE(devices));
-	}
-
-	return ret;
-}
-
-postcore_initcall(pxa3xx_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/pxa930.c b/ANDROID_3.4.5/arch/arm/mach-pxa/pxa930.c
deleted file mode 100644
index 8aeacf90..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/pxa930.c
+++ /dev/null
@@ -1,206 +0,0 @@
-/*
- * linux/arch/arm/mach-pxa/pxa930.c
- *
- * Code specific to PXA930
- *
- * Copyright (C) 2007-2008 Marvell Internation Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/irq.h>
-#include <linux/dma-mapping.h>
-
-#include <mach/pxa930.h>
-
-static struct mfp_addr_map pxa930_mfp_addr_map[] __initdata = {
-
-	MFP_ADDR(GPIO0, 0x02e0),
-	MFP_ADDR(GPIO1, 0x02dc),
-	MFP_ADDR(GPIO2, 0x02e8),
-	MFP_ADDR(GPIO3, 0x02d8),
-	MFP_ADDR(GPIO4, 0x02e4),
-	MFP_ADDR(GPIO5, 0x02ec),
-	MFP_ADDR(GPIO6, 0x02f8),
-	MFP_ADDR(GPIO7, 0x02fc),
-	MFP_ADDR(GPIO8, 0x0300),
-	MFP_ADDR(GPIO9, 0x02d4),
-	MFP_ADDR(GPIO10, 0x02f4),
-	MFP_ADDR(GPIO11, 0x02f0),
-	MFP_ADDR(GPIO12, 0x0304),
-	MFP_ADDR(GPIO13, 0x0310),
-	MFP_ADDR(GPIO14, 0x0308),
-	MFP_ADDR(GPIO15, 0x030c),
-	MFP_ADDR(GPIO16, 0x04e8),
-	MFP_ADDR(GPIO17, 0x04f4),
-	MFP_ADDR(GPIO18, 0x04f8),
-	MFP_ADDR(GPIO19, 0x04fc),
-	MFP_ADDR(GPIO20, 0x0518),
-	MFP_ADDR(GPIO21, 0x051c),
-	MFP_ADDR(GPIO22, 0x04ec),
-	MFP_ADDR(GPIO23, 0x0500),
-	MFP_ADDR(GPIO24, 0x04f0),
-	MFP_ADDR(GPIO25, 0x0504),
-	MFP_ADDR(GPIO26, 0x0510),
-	MFP_ADDR(GPIO27, 0x0514),
-	MFP_ADDR(GPIO28, 0x0520),
-	MFP_ADDR(GPIO29, 0x0600),
-	MFP_ADDR(GPIO30, 0x0618),
-	MFP_ADDR(GPIO31, 0x0610),
-	MFP_ADDR(GPIO32, 0x060c),
-	MFP_ADDR(GPIO33, 0x061c),
-	MFP_ADDR(GPIO34, 0x0620),
-	MFP_ADDR(GPIO35, 0x0628),
-	MFP_ADDR(GPIO36, 0x062c),
-	MFP_ADDR(GPIO37, 0x0630),
-	MFP_ADDR(GPIO38, 0x0634),
-	MFP_ADDR(GPIO39, 0x0638),
-	MFP_ADDR(GPIO40, 0x063c),
-	MFP_ADDR(GPIO41, 0x0614),
-	MFP_ADDR(GPIO42, 0x0624),
-	MFP_ADDR(GPIO43, 0x0608),
-	MFP_ADDR(GPIO44, 0x0604),
-	MFP_ADDR(GPIO45, 0x050c),
-	MFP_ADDR(GPIO46, 0x0508),
-	MFP_ADDR(GPIO47, 0x02bc),
-	MFP_ADDR(GPIO48, 0x02b4),
-	MFP_ADDR(GPIO49, 0x02b8),
-	MFP_ADDR(GPIO50, 0x02c8),
-	MFP_ADDR(GPIO51, 0x02c0),
-	MFP_ADDR(GPIO52, 0x02c4),
-	MFP_ADDR(GPIO53, 0x02d0),
-	MFP_ADDR(GPIO54, 0x02cc),
-	MFP_ADDR(GPIO55, 0x029c),
-	MFP_ADDR(GPIO56, 0x02a0),
-	MFP_ADDR(GPIO57, 0x0294),
-	MFP_ADDR(GPIO58, 0x0298),
-	MFP_ADDR(GPIO59, 0x02a4),
-	MFP_ADDR(GPIO60, 0x02a8),
-	MFP_ADDR(GPIO61, 0x02b0),
-	MFP_ADDR(GPIO62, 0x02ac),
-	MFP_ADDR(GPIO63, 0x0640),
-	MFP_ADDR(GPIO64, 0x065c),
-	MFP_ADDR(GPIO65, 0x0648),
-	MFP_ADDR(GPIO66, 0x0644),
-	MFP_ADDR(GPIO67, 0x0674),
-	MFP_ADDR(GPIO68, 0x0658),
-	MFP_ADDR(GPIO69, 0x0654),
-	MFP_ADDR(GPIO70, 0x0660),
-	MFP_ADDR(GPIO71, 0x0668),
-	MFP_ADDR(GPIO72, 0x0664),
-	MFP_ADDR(GPIO73, 0x0650),
-	MFP_ADDR(GPIO74, 0x066c),
-	MFP_ADDR(GPIO75, 0x064c),
-	MFP_ADDR(GPIO76, 0x0670),
-	MFP_ADDR(GPIO77, 0x0678),
-	MFP_ADDR(GPIO78, 0x067c),
-	MFP_ADDR(GPIO79, 0x0694),
-	MFP_ADDR(GPIO80, 0x069c),
-	MFP_ADDR(GPIO81, 0x06a0),
-	MFP_ADDR(GPIO82, 0x06a4),
-	MFP_ADDR(GPIO83, 0x0698),
-	MFP_ADDR(GPIO84, 0x06bc),
-	MFP_ADDR(GPIO85, 0x06b4),
-	MFP_ADDR(GPIO86, 0x06b0),
-	MFP_ADDR(GPIO87, 0x06c0),
-	MFP_ADDR(GPIO88, 0x06c4),
-	MFP_ADDR(GPIO89, 0x06ac),
-	MFP_ADDR(GPIO90, 0x0680),
-	MFP_ADDR(GPIO91, 0x0684),
-	MFP_ADDR(GPIO92, 0x0688),
-	MFP_ADDR(GPIO93, 0x0690),
-	MFP_ADDR(GPIO94, 0x068c),
-	MFP_ADDR(GPIO95, 0x06a8),
-	MFP_ADDR(GPIO96, 0x06b8),
-	MFP_ADDR(GPIO97, 0x0410),
-	MFP_ADDR(GPIO98, 0x0418),
-	MFP_ADDR(GPIO99, 0x041c),
-	MFP_ADDR(GPIO100, 0x0414),
-	MFP_ADDR(GPIO101, 0x0408),
-	MFP_ADDR(GPIO102, 0x0324),
-	MFP_ADDR(GPIO103, 0x040c),
-	MFP_ADDR(GPIO104, 0x0400),
-	MFP_ADDR(GPIO105, 0x0328),
-	MFP_ADDR(GPIO106, 0x0404),
-
-	MFP_ADDR(nXCVREN, 0x0204),
-	MFP_ADDR(DF_CLE_nOE, 0x020c),
-	MFP_ADDR(DF_nADV1_ALE, 0x0218),
-	MFP_ADDR(DF_SCLK_E, 0x0214),
-	MFP_ADDR(DF_SCLK_S, 0x0210),
-	MFP_ADDR(nBE0, 0x021c),
-	MFP_ADDR(nBE1, 0x0220),
-	MFP_ADDR(DF_nADV2_ALE, 0x0224),
-	MFP_ADDR(DF_INT_RnB, 0x0228),
-	MFP_ADDR(DF_nCS0, 0x022c),
-	MFP_ADDR(DF_nCS1, 0x0230),
-	MFP_ADDR(nLUA, 0x0254),
-	MFP_ADDR(nLLA, 0x0258),
-	MFP_ADDR(DF_nWE, 0x0234),
-	MFP_ADDR(DF_nRE_nOE, 0x0238),
-	MFP_ADDR(DF_ADDR0, 0x024c),
-	MFP_ADDR(DF_ADDR1, 0x0250),
-	MFP_ADDR(DF_ADDR2, 0x025c),
-	MFP_ADDR(DF_ADDR3, 0x0260),
-	MFP_ADDR(DF_IO0, 0x023c),
-	MFP_ADDR(DF_IO1, 0x0240),
-	MFP_ADDR(DF_IO2, 0x0244),
-	MFP_ADDR(DF_IO3, 0x0248),
-	MFP_ADDR(DF_IO4, 0x0264),
-	MFP_ADDR(DF_IO5, 0x0268),
-	MFP_ADDR(DF_IO6, 0x026c),
-	MFP_ADDR(DF_IO7, 0x0270),
-	MFP_ADDR(DF_IO8, 0x0274),
-	MFP_ADDR(DF_IO9, 0x0278),
-	MFP_ADDR(DF_IO10, 0x027c),
-	MFP_ADDR(DF_IO11, 0x0280),
-	MFP_ADDR(DF_IO12, 0x0284),
-	MFP_ADDR(DF_IO13, 0x0288),
-	MFP_ADDR(DF_IO14, 0x028c),
-	MFP_ADDR(DF_IO15, 0x0290),
-
-	MFP_ADDR(GSIM_UIO, 0x0314),
-	MFP_ADDR(GSIM_UCLK, 0x0318),
-	MFP_ADDR(GSIM_UDET, 0x031c),
-	MFP_ADDR(GSIM_nURST, 0x0320),
-
-	MFP_ADDR(PMIC_INT, 0x06c8),
-
-	MFP_ADDR(RDY, 0x0200),
-
-	MFP_ADDR_END,
-};
-
-static struct mfp_addr_map pxa935_mfp_addr_map[] __initdata = {
-	MFP_ADDR(GPIO159, 0x0524),
-	MFP_ADDR(GPIO163, 0x0534),
-	MFP_ADDR(GPIO167, 0x0544),
-	MFP_ADDR(GPIO168, 0x0548),
-	MFP_ADDR(GPIO169, 0x054c),
-	MFP_ADDR(GPIO170, 0x0550),
-	MFP_ADDR(GPIO171, 0x0554),
-	MFP_ADDR(GPIO172, 0x0558),
-	MFP_ADDR(GPIO173, 0x055c),
-
-	MFP_ADDR_END,
-};
-
-static int __init pxa930_init(void)
-{
-	if (cpu_is_pxa93x()) {
-		mfp_init_base(io_p2v(MFPR_BASE));
-		mfp_init_addr(pxa930_mfp_addr_map);
-	}
-
-	if (cpu_is_pxa935())
-		mfp_init_addr(pxa935_mfp_addr_map);
-
-	return 0;
-}
-
-core_initcall(pxa930_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/pxa95x.c b/ANDROID_3.4.5/arch/arm/mach-pxa/pxa95x.c
deleted file mode 100644
index 47601f80..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/pxa95x.c
+++ /dev/null
@@ -1,295 +0,0 @@
-/*
- * linux/arch/arm/mach-pxa/pxa95x.c
- *
- * code specific to PXA95x aka MGx
- *
- * Copyright (C) 2009-2010 Marvell International Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/pm.h>
-#include <linux/platform_device.h>
-#include <linux/i2c/pxa-i2c.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/syscore_ops.h>
-
-#include <mach/hardware.h>
-#include <mach/pxa3xx-regs.h>
-#include <mach/pxa930.h>
-#include <mach/reset.h>
-#include <mach/pm.h>
-#include <mach/dma.h>
-
-#include "generic.h"
-#include "devices.h"
-#include "clock.h"
-
-static struct mfp_addr_map pxa95x_mfp_addr_map[] __initdata = {
-
-	MFP_ADDR(GPIO0, 0x02e0),
-	MFP_ADDR(GPIO1, 0x02dc),
-	MFP_ADDR(GPIO2, 0x02e8),
-	MFP_ADDR(GPIO3, 0x02d8),
-	MFP_ADDR(GPIO4, 0x02e4),
-	MFP_ADDR(GPIO5, 0x02ec),
-	MFP_ADDR(GPIO6, 0x02f8),
-	MFP_ADDR(GPIO7, 0x02fc),
-	MFP_ADDR(GPIO8, 0x0300),
-	MFP_ADDR(GPIO9, 0x02d4),
-	MFP_ADDR(GPIO10, 0x02f4),
-	MFP_ADDR(GPIO11, 0x02f0),
-	MFP_ADDR(GPIO12, 0x0304),
-	MFP_ADDR(GPIO13, 0x0310),
-	MFP_ADDR(GPIO14, 0x0308),
-	MFP_ADDR(GPIO15, 0x030c),
-	MFP_ADDR(GPIO16, 0x04e8),
-	MFP_ADDR(GPIO17, 0x04f4),
-	MFP_ADDR(GPIO18, 0x04f8),
-	MFP_ADDR(GPIO19, 0x04fc),
-	MFP_ADDR(GPIO20, 0x0518),
-	MFP_ADDR(GPIO21, 0x051c),
-	MFP_ADDR(GPIO22, 0x04ec),
-	MFP_ADDR(GPIO23, 0x0500),
-	MFP_ADDR(GPIO24, 0x04f0),
-	MFP_ADDR(GPIO25, 0x0504),
-	MFP_ADDR(GPIO26, 0x0510),
-	MFP_ADDR(GPIO27, 0x0514),
-	MFP_ADDR(GPIO28, 0x0520),
-	MFP_ADDR(GPIO29, 0x0600),
-	MFP_ADDR(GPIO30, 0x0618),
-	MFP_ADDR(GPIO31, 0x0610),
-	MFP_ADDR(GPIO32, 0x060c),
-	MFP_ADDR(GPIO33, 0x061c),
-	MFP_ADDR(GPIO34, 0x0620),
-	MFP_ADDR(GPIO35, 0x0628),
-	MFP_ADDR(GPIO36, 0x062c),
-	MFP_ADDR(GPIO37, 0x0630),
-	MFP_ADDR(GPIO38, 0x0634),
-	MFP_ADDR(GPIO39, 0x0638),
-	MFP_ADDR(GPIO40, 0x063c),
-	MFP_ADDR(GPIO41, 0x0614),
-	MFP_ADDR(GPIO42, 0x0624),
-	MFP_ADDR(GPIO43, 0x0608),
-	MFP_ADDR(GPIO44, 0x0604),
-	MFP_ADDR(GPIO45, 0x050c),
-	MFP_ADDR(GPIO46, 0x0508),
-	MFP_ADDR(GPIO47, 0x02bc),
-	MFP_ADDR(GPIO48, 0x02b4),
-	MFP_ADDR(GPIO49, 0x02b8),
-	MFP_ADDR(GPIO50, 0x02c8),
-	MFP_ADDR(GPIO51, 0x02c0),
-	MFP_ADDR(GPIO52, 0x02c4),
-	MFP_ADDR(GPIO53, 0x02d0),
-	MFP_ADDR(GPIO54, 0x02cc),
-	MFP_ADDR(GPIO55, 0x029c),
-	MFP_ADDR(GPIO56, 0x02a0),
-	MFP_ADDR(GPIO57, 0x0294),
-	MFP_ADDR(GPIO58, 0x0298),
-	MFP_ADDR(GPIO59, 0x02a4),
-	MFP_ADDR(GPIO60, 0x02a8),
-	MFP_ADDR(GPIO61, 0x02b0),
-	MFP_ADDR(GPIO62, 0x02ac),
-	MFP_ADDR(GPIO63, 0x0640),
-	MFP_ADDR(GPIO64, 0x065c),
-	MFP_ADDR(GPIO65, 0x0648),
-	MFP_ADDR(GPIO66, 0x0644),
-	MFP_ADDR(GPIO67, 0x0674),
-	MFP_ADDR(GPIO68, 0x0658),
-	MFP_ADDR(GPIO69, 0x0654),
-	MFP_ADDR(GPIO70, 0x0660),
-	MFP_ADDR(GPIO71, 0x0668),
-	MFP_ADDR(GPIO72, 0x0664),
-	MFP_ADDR(GPIO73, 0x0650),
-	MFP_ADDR(GPIO74, 0x066c),
-	MFP_ADDR(GPIO75, 0x064c),
-	MFP_ADDR(GPIO76, 0x0670),
-	MFP_ADDR(GPIO77, 0x0678),
-	MFP_ADDR(GPIO78, 0x067c),
-	MFP_ADDR(GPIO79, 0x0694),
-	MFP_ADDR(GPIO80, 0x069c),
-	MFP_ADDR(GPIO81, 0x06a0),
-	MFP_ADDR(GPIO82, 0x06a4),
-	MFP_ADDR(GPIO83, 0x0698),
-	MFP_ADDR(GPIO84, 0x06bc),
-	MFP_ADDR(GPIO85, 0x06b4),
-	MFP_ADDR(GPIO86, 0x06b0),
-	MFP_ADDR(GPIO87, 0x06c0),
-	MFP_ADDR(GPIO88, 0x06c4),
-	MFP_ADDR(GPIO89, 0x06ac),
-	MFP_ADDR(GPIO90, 0x0680),
-	MFP_ADDR(GPIO91, 0x0684),
-	MFP_ADDR(GPIO92, 0x0688),
-	MFP_ADDR(GPIO93, 0x0690),
-	MFP_ADDR(GPIO94, 0x068c),
-	MFP_ADDR(GPIO95, 0x06a8),
-	MFP_ADDR(GPIO96, 0x06b8),
-	MFP_ADDR(GPIO97, 0x0410),
-	MFP_ADDR(GPIO98, 0x0418),
-	MFP_ADDR(GPIO99, 0x041c),
-	MFP_ADDR(GPIO100, 0x0414),
-	MFP_ADDR(GPIO101, 0x0408),
-	MFP_ADDR(GPIO102, 0x0324),
-	MFP_ADDR(GPIO103, 0x040c),
-	MFP_ADDR(GPIO104, 0x0400),
-	MFP_ADDR(GPIO105, 0x0328),
-	MFP_ADDR(GPIO106, 0x0404),
-
-	MFP_ADDR(GPIO159, 0x0524),
-	MFP_ADDR(GPIO163, 0x0534),
-	MFP_ADDR(GPIO167, 0x0544),
-	MFP_ADDR(GPIO168, 0x0548),
-	MFP_ADDR(GPIO169, 0x054c),
-	MFP_ADDR(GPIO170, 0x0550),
-	MFP_ADDR(GPIO171, 0x0554),
-	MFP_ADDR(GPIO172, 0x0558),
-	MFP_ADDR(GPIO173, 0x055c),
-
-	MFP_ADDR(nXCVREN, 0x0204),
-	MFP_ADDR(DF_CLE_nOE, 0x020c),
-	MFP_ADDR(DF_nADV1_ALE, 0x0218),
-	MFP_ADDR(DF_SCLK_E, 0x0214),
-	MFP_ADDR(DF_SCLK_S, 0x0210),
-	MFP_ADDR(nBE0, 0x021c),
-	MFP_ADDR(nBE1, 0x0220),
-	MFP_ADDR(DF_nADV2_ALE, 0x0224),
-	MFP_ADDR(DF_INT_RnB, 0x0228),
-	MFP_ADDR(DF_nCS0, 0x022c),
-	MFP_ADDR(DF_nCS1, 0x0230),
-	MFP_ADDR(nLUA, 0x0254),
-	MFP_ADDR(nLLA, 0x0258),
-	MFP_ADDR(DF_nWE, 0x0234),
-	MFP_ADDR(DF_nRE_nOE, 0x0238),
-	MFP_ADDR(DF_ADDR0, 0x024c),
-	MFP_ADDR(DF_ADDR1, 0x0250),
-	MFP_ADDR(DF_ADDR2, 0x025c),
-	MFP_ADDR(DF_ADDR3, 0x0260),
-	MFP_ADDR(DF_IO0, 0x023c),
-	MFP_ADDR(DF_IO1, 0x0240),
-	MFP_ADDR(DF_IO2, 0x0244),
-	MFP_ADDR(DF_IO3, 0x0248),
-	MFP_ADDR(DF_IO4, 0x0264),
-	MFP_ADDR(DF_IO5, 0x0268),
-	MFP_ADDR(DF_IO6, 0x026c),
-	MFP_ADDR(DF_IO7, 0x0270),
-	MFP_ADDR(DF_IO8, 0x0274),
-	MFP_ADDR(DF_IO9, 0x0278),
-	MFP_ADDR(DF_IO10, 0x027c),
-	MFP_ADDR(DF_IO11, 0x0280),
-	MFP_ADDR(DF_IO12, 0x0284),
-	MFP_ADDR(DF_IO13, 0x0288),
-	MFP_ADDR(DF_IO14, 0x028c),
-	MFP_ADDR(DF_IO15, 0x0290),
-
-	MFP_ADDR(GSIM_UIO, 0x0314),
-	MFP_ADDR(GSIM_UCLK, 0x0318),
-	MFP_ADDR(GSIM_UDET, 0x031c),
-	MFP_ADDR(GSIM_nURST, 0x0320),
-
-	MFP_ADDR(PMIC_INT, 0x06c8),
-
-	MFP_ADDR(RDY, 0x0200),
-
-	MFP_ADDR_END,
-};
-
-static DEFINE_CK(pxa95x_lcd, LCD, &clk_pxa3xx_hsio_ops);
-static DEFINE_CLK(pxa95x_pout, &clk_pxa3xx_pout_ops, 13000000, 70);
-static DEFINE_PXA3_CKEN(pxa95x_ffuart, FFUART, 14857000, 1);
-static DEFINE_PXA3_CKEN(pxa95x_btuart, BTUART, 14857000, 1);
-static DEFINE_PXA3_CKEN(pxa95x_stuart, STUART, 14857000, 1);
-static DEFINE_PXA3_CKEN(pxa95x_i2c, I2C, 32842000, 0);
-static DEFINE_PXA3_CKEN(pxa95x_keypad, KEYPAD, 32768, 0);
-static DEFINE_PXA3_CKEN(pxa95x_ssp1, SSP1, 13000000, 0);
-static DEFINE_PXA3_CKEN(pxa95x_ssp2, SSP2, 13000000, 0);
-static DEFINE_PXA3_CKEN(pxa95x_ssp3, SSP3, 13000000, 0);
-static DEFINE_PXA3_CKEN(pxa95x_ssp4, SSP4, 13000000, 0);
-static DEFINE_PXA3_CKEN(pxa95x_pwm0, PWM0, 13000000, 0);
-static DEFINE_PXA3_CKEN(pxa95x_pwm1, PWM1, 13000000, 0);
-static DEFINE_PXA3_CKEN(pxa95x_gpio, GPIO, 13000000, 0);
-
-static struct clk_lookup pxa95x_clkregs[] = {
-	INIT_CLKREG(&clk_pxa95x_pout, NULL, "CLK_POUT"),
-	/* Power I2C clock is always on */
-	INIT_CLKREG(&clk_dummy, "pxa3xx-pwri2c.1", NULL),
-	INIT_CLKREG(&clk_pxa95x_lcd, "pxa2xx-fb", NULL),
-	INIT_CLKREG(&clk_pxa95x_ffuart, "pxa2xx-uart.0", NULL),
-	INIT_CLKREG(&clk_pxa95x_btuart, "pxa2xx-uart.1", NULL),
-	INIT_CLKREG(&clk_pxa95x_stuart, "pxa2xx-uart.2", NULL),
-	INIT_CLKREG(&clk_pxa95x_stuart, "pxa2xx-ir", "UARTCLK"),
-	INIT_CLKREG(&clk_pxa95x_i2c, "pxa2xx-i2c.0", NULL),
-	INIT_CLKREG(&clk_pxa95x_keypad, "pxa27x-keypad", NULL),
-	INIT_CLKREG(&clk_pxa95x_ssp1, "pxa27x-ssp.0", NULL),
-	INIT_CLKREG(&clk_pxa95x_ssp2, "pxa27x-ssp.1", NULL),
-	INIT_CLKREG(&clk_pxa95x_ssp3, "pxa27x-ssp.2", NULL),
-	INIT_CLKREG(&clk_pxa95x_ssp4, "pxa27x-ssp.3", NULL),
-	INIT_CLKREG(&clk_pxa95x_pwm0, "pxa27x-pwm.0", NULL),
-	INIT_CLKREG(&clk_pxa95x_pwm1, "pxa27x-pwm.1", NULL),
-	INIT_CLKREG(&clk_pxa95x_gpio, "pxa-gpio", NULL),
-	INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL),
-};
-
-void __init pxa95x_init_irq(void)
-{
-	pxa_init_irq(96, NULL);
-}
-
-/*
- * device registration specific to PXA93x.
- */
-
-void __init pxa95x_set_i2c_power_info(struct i2c_pxa_platform_data *info)
-{
-	pxa_register_device(&pxa3xx_device_i2c_power, info);
-}
-
-static struct platform_device *devices[] __initdata = {
-	&pxa_device_gpio,
-	&sa1100_device_rtc,
-	&pxa_device_rtc,
-	&pxa27x_device_ssp1,
-	&pxa27x_device_ssp2,
-	&pxa27x_device_ssp3,
-	&pxa3xx_device_ssp4,
-	&pxa27x_device_pwm0,
-	&pxa27x_device_pwm1,
-};
-
-static int __init pxa95x_init(void)
-{
-	int ret = 0, i;
-
-	if (cpu_is_pxa95x()) {
-		mfp_init_base(io_p2v(MFPR_BASE));
-		mfp_init_addr(pxa95x_mfp_addr_map);
-
-		reset_status = ARSR;
-
-		/*
-		 * clear RDH bit every time after reset
-		 *
-		 * Note: the last 3 bits DxS are write-1-to-clear so carefully
-		 * preserve them here in case they will be referenced later
-		 */
-		ASCR &= ~(ASCR_RDH | ASCR_D1S | ASCR_D2S | ASCR_D3S);
-
-		clkdev_add_table(pxa95x_clkregs, ARRAY_SIZE(pxa95x_clkregs));
-
-		if ((ret = pxa_init_dma(IRQ_DMA, 32)))
-			return ret;
-
-		register_syscore_ops(&pxa_irq_syscore_ops);
-		register_syscore_ops(&pxa3xx_clock_syscore_ops);
-
-		ret = platform_add_devices(devices, ARRAY_SIZE(devices));
-	}
-
-	return ret;
-}
-
-postcore_initcall(pxa95x_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/raumfeld.c b/ANDROID_3.4.5/arch/arm/mach-pxa/raumfeld.c
deleted file mode 100644
index 5905ed13..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/raumfeld.c
+++ /dev/null
@@ -1,1127 +0,0 @@
-/*
- * arch/arm/mach-pxa/raumfeld.c
- *
- * Support for the following Raumfeld devices:
- *
- * 	* Controller
- *  	* Connector
- *  	* Speaker S/M
- *
- * See http://www.raumfeld.com for details.
- *
- * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/gpio.h>
-#include <linux/smsc911x.h>
-#include <linux/input.h>
-#include <linux/rotary_encoder.h>
-#include <linux/gpio_keys.h>
-#include <linux/input/eeti_ts.h>
-#include <linux/leds.h>
-#include <linux/w1-gpio.h>
-#include <linux/sched.h>
-#include <linux/pwm_backlight.h>
-#include <linux/i2c.h>
-#include <linux/i2c/pxa-i2c.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/spi_gpio.h>
-#include <linux/lis3lv02d.h>
-#include <linux/pda_power.h>
-#include <linux/power_supply.h>
-#include <linux/regulator/max8660.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/consumer.h>
-#include <linux/delay.h>
-
-#include <asm/system_info.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include <mach/pxa300.h>
-#include <mach/ohci.h>
-#include <mach/pxafb.h>
-#include <mach/mmc.h>
-#include <plat/pxa3xx_nand.h>
-
-#include "generic.h"
-#include "devices.h"
-#include "clock.h"
-
-/* common GPIO	definitions */
-
-/* inputs */
-#define GPIO_ON_OFF		(14)
-#define GPIO_VOLENC_A		(19)
-#define GPIO_VOLENC_B		(20)
-#define GPIO_CHARGE_DONE	(23)
-#define GPIO_CHARGE_IND		(27)
-#define GPIO_TOUCH_IRQ		(32)
-#define GPIO_ETH_IRQ		(40)
-#define GPIO_SPI_MISO		(98)
-#define GPIO_ACCEL_IRQ		(104)
-#define GPIO_RESCUE_BOOT	(115)
-#define GPIO_DOCK_DETECT	(116)
-#define GPIO_KEY1		(117)
-#define GPIO_KEY2		(118)
-#define GPIO_KEY3		(119)
-#define GPIO_CHARGE_USB_OK	(112)
-#define GPIO_CHARGE_DC_OK	(101)
-#define GPIO_CHARGE_USB_SUSP	(102)
-
-/* outputs */
-#define GPIO_SHUTDOWN_SUPPLY	(16)
-#define GPIO_SHUTDOWN_BATT	(18)
-#define GPIO_CHRG_PEN2		(31)
-#define GPIO_TFT_VA_EN		(33)
-#define GPIO_SPDIF_CS		(34)
-#define GPIO_LED2		(35)
-#define GPIO_LED1		(36)
-#define GPIO_SPDIF_RESET	(38)
-#define GPIO_SPI_CLK		(95)
-#define GPIO_MCLK_DAC_CS	(96)
-#define GPIO_SPI_MOSI		(97)
-#define GPIO_W1_PULLUP_ENABLE	(105)
-#define GPIO_DISPLAY_ENABLE	(106)
-#define GPIO_MCLK_RESET		(111)
-#define GPIO_W2W_RESET		(113)
-#define GPIO_W2W_PDN		(114)
-#define GPIO_CODEC_RESET	(120)
-#define GPIO_AUDIO_VA_ENABLE	(124)
-#define GPIO_ACCEL_CS		(125)
-#define GPIO_ONE_WIRE		(126)
-
-/*
- * GPIO configurations
- */
-static mfp_cfg_t raumfeld_controller_pin_config[] __initdata = {
-	/* UART1 */
-	GPIO77_UART1_RXD,
-	GPIO78_UART1_TXD,
-	GPIO79_UART1_CTS,
-	GPIO81_UART1_DSR,
-	GPIO83_UART1_DTR,
-	GPIO84_UART1_RTS,
-
-	/* UART3 */
-	GPIO110_UART3_RXD,
-
-	/* USB Host */
-	GPIO0_2_USBH_PEN,
-	GPIO1_2_USBH_PWR,
-
-	/* I2C */
-	GPIO21_I2C_SCL | MFP_LPM_FLOAT | MFP_PULL_FLOAT,
-	GPIO22_I2C_SDA | MFP_LPM_FLOAT | MFP_PULL_FLOAT,
-
-	/* SPI */
-	GPIO34_GPIO,	/* SPDIF_CS */
-	GPIO96_GPIO,	/* MCLK_CS */
-	GPIO125_GPIO,	/* ACCEL_CS */
-
-	/* MMC */
-	GPIO3_MMC1_DAT0,
-	GPIO4_MMC1_DAT1,
-	GPIO5_MMC1_DAT2,
-	GPIO6_MMC1_DAT3,
-	GPIO7_MMC1_CLK,
-	GPIO8_MMC1_CMD,
-
-	/* One-wire */
-	GPIO126_GPIO | MFP_LPM_FLOAT,
-	GPIO105_GPIO | MFP_PULL_LOW | MFP_LPM_PULL_LOW,
-
-	/* CHRG_USB_OK */
-	GPIO101_GPIO | MFP_PULL_HIGH,
-	/* CHRG_USB_OK */
-	GPIO112_GPIO | MFP_PULL_HIGH,
-	/* CHRG_USB_SUSP */
-	GPIO102_GPIO,
-	/* DISPLAY_ENABLE */
-	GPIO106_GPIO,
-	/* DOCK_DETECT */
-	GPIO116_GPIO | MFP_LPM_FLOAT | MFP_PULL_FLOAT,
-
-	/* LCD */
-	GPIO54_LCD_LDD_0,
-	GPIO55_LCD_LDD_1,
-	GPIO56_LCD_LDD_2,
-	GPIO57_LCD_LDD_3,
-	GPIO58_LCD_LDD_4,
-	GPIO59_LCD_LDD_5,
-	GPIO60_LCD_LDD_6,
-	GPIO61_LCD_LDD_7,
-	GPIO62_LCD_LDD_8,
-	GPIO63_LCD_LDD_9,
-	GPIO64_LCD_LDD_10,
-	GPIO65_LCD_LDD_11,
-	GPIO66_LCD_LDD_12,
-	GPIO67_LCD_LDD_13,
-	GPIO68_LCD_LDD_14,
-	GPIO69_LCD_LDD_15,
-	GPIO70_LCD_LDD_16,
-	GPIO71_LCD_LDD_17,
-	GPIO72_LCD_FCLK,
-	GPIO73_LCD_LCLK,
-	GPIO74_LCD_PCLK,
-	GPIO75_LCD_BIAS,
-};
-
-static mfp_cfg_t raumfeld_connector_pin_config[] __initdata = {
-	/* UART1 */
-	GPIO77_UART1_RXD,
-	GPIO78_UART1_TXD,
-	GPIO79_UART1_CTS,
-	GPIO81_UART1_DSR,
-	GPIO83_UART1_DTR,
-	GPIO84_UART1_RTS,
-
-	/* UART3 */
-	GPIO110_UART3_RXD,
-
-	/* USB Host */
-	GPIO0_2_USBH_PEN,
-	GPIO1_2_USBH_PWR,
-
-	/* I2C */
-	GPIO21_I2C_SCL | MFP_LPM_FLOAT | MFP_PULL_FLOAT,
-	GPIO22_I2C_SDA | MFP_LPM_FLOAT | MFP_PULL_FLOAT,
-
-	/* SPI */
-	GPIO34_GPIO,	/* SPDIF_CS */
-	GPIO96_GPIO,	/* MCLK_CS */
-	GPIO125_GPIO,	/* ACCEL_CS */
-
-	/* MMC */
-	GPIO3_MMC1_DAT0,
-	GPIO4_MMC1_DAT1,
-	GPIO5_MMC1_DAT2,
-	GPIO6_MMC1_DAT3,
-	GPIO7_MMC1_CLK,
-	GPIO8_MMC1_CMD,
-
-	/* Ethernet */
-	GPIO1_nCS2,			/* CS */
-	GPIO40_GPIO | MFP_PULL_HIGH,	/* IRQ */
-
-	/* SSP for I2S */
-	GPIO85_SSP1_SCLK,
-	GPIO89_SSP1_EXTCLK,
-	GPIO86_SSP1_FRM,
-	GPIO87_SSP1_TXD,
-	GPIO88_SSP1_RXD,
-	GPIO90_SSP1_SYSCLK,
-
-	/* SSP2 for S/PDIF */
-	GPIO25_SSP2_SCLK,
-	GPIO26_SSP2_FRM,
-	GPIO27_SSP2_TXD,
-	GPIO29_SSP2_EXTCLK,
-
-	/* LEDs */
-	GPIO35_GPIO | MFP_LPM_PULL_LOW,
-	GPIO36_GPIO | MFP_LPM_DRIVE_HIGH,
-};
-
-static mfp_cfg_t raumfeld_speaker_pin_config[] __initdata = {
-	/* UART1 */
-	GPIO77_UART1_RXD,
-	GPIO78_UART1_TXD,
-	GPIO79_UART1_CTS,
-	GPIO81_UART1_DSR,
-	GPIO83_UART1_DTR,
-	GPIO84_UART1_RTS,
-
-	/* UART3 */
-	GPIO110_UART3_RXD,
-
-	/* USB Host */
-	GPIO0_2_USBH_PEN,
-	GPIO1_2_USBH_PWR,
-
-	/* I2C */
-	GPIO21_I2C_SCL | MFP_LPM_FLOAT | MFP_PULL_FLOAT,
-	GPIO22_I2C_SDA | MFP_LPM_FLOAT | MFP_PULL_FLOAT,
-
-	/* SPI */
-	GPIO34_GPIO,	/* SPDIF_CS */
-	GPIO96_GPIO,	/* MCLK_CS */
-	GPIO125_GPIO,	/* ACCEL_CS */
-
-	/* MMC */
-	GPIO3_MMC1_DAT0,
-	GPIO4_MMC1_DAT1,
-	GPIO5_MMC1_DAT2,
-	GPIO6_MMC1_DAT3,
-	GPIO7_MMC1_CLK,
-	GPIO8_MMC1_CMD,
-
-	/* Ethernet */
-	GPIO1_nCS2,			/* CS */
-	GPIO40_GPIO | MFP_PULL_HIGH,	/* IRQ */
-
-	/* SSP for I2S */
-	GPIO85_SSP1_SCLK,
-	GPIO89_SSP1_EXTCLK,
-	GPIO86_SSP1_FRM,
-	GPIO87_SSP1_TXD,
-	GPIO88_SSP1_RXD,
-	GPIO90_SSP1_SYSCLK,
-
-	/* LEDs */
-	GPIO35_GPIO | MFP_LPM_PULL_LOW,
-	GPIO36_GPIO | MFP_LPM_DRIVE_HIGH,
-};
-
-/*
- * SMSC LAN9220 Ethernet
- */
-
-static struct resource smc91x_resources[] = {
-	{
-		.start	= PXA3xx_CS2_PHYS,
-		.end	= PXA3xx_CS2_PHYS + 0xfffff,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= PXA_GPIO_TO_IRQ(GPIO_ETH_IRQ),
-		.end	= PXA_GPIO_TO_IRQ(GPIO_ETH_IRQ),
-		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_FALLING,
-	}
-};
-
-static struct smsc911x_platform_config raumfeld_smsc911x_config = {
-	.phy_interface	= PHY_INTERFACE_MODE_MII,
-	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
-	.irq_type	= SMSC911X_IRQ_TYPE_OPEN_DRAIN,
-	.flags		= SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS,
-};
-
-static struct platform_device smc91x_device = {
-	.name		= "smsc911x",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(smc91x_resources),
-	.resource	= smc91x_resources,
-	.dev		= {
-		.platform_data = &raumfeld_smsc911x_config,
-	}
-};
-
-/**
- * NAND
- */
-
-static struct mtd_partition raumfeld_nand_partitions[] = {
-	{
-		.name		= "Bootloader",
-		.offset		= 0,
-		.size		= 0xa0000,
-		.mask_flags	= MTD_WRITEABLE, /* force read-only */
-	},
-	{
-		.name		= "BootloaderEnvironment",
-		.offset		= 0xa0000,
-		.size		= 0x20000,
-	},
-	{
-		.name		= "BootloaderSplashScreen",
-		.offset		= 0xc0000,
-		.size		= 0x60000,
-	},
-	{
-		.name		= "UBI",
-		.offset		= 0x120000,
-		.size		= MTDPART_SIZ_FULL,
-	},
-};
-
-static struct pxa3xx_nand_platform_data raumfeld_nand_info = {
-	.enable_arbiter	= 1,
-	.keep_config	= 1,
-	.num_cs		= 1,
-	.parts[0]	= raumfeld_nand_partitions,
-	.nr_parts[0]	= ARRAY_SIZE(raumfeld_nand_partitions),
-};
-
-/**
- * USB (OHCI) support
- */
-
-static struct pxaohci_platform_data raumfeld_ohci_info = {
-	.port_mode      = PMM_GLOBAL_MODE,
-	.flags		= ENABLE_PORT1,
-};
-
-/**
- * Rotary encoder input device
- */
-
-static struct rotary_encoder_platform_data raumfeld_rotary_encoder_info = {
-	.steps		= 24,
-	.axis		= REL_X,
-	.relative_axis	= 1,
-	.gpio_a		= GPIO_VOLENC_A,
-	.gpio_b		= GPIO_VOLENC_B,
-	.inverted_a	= 1,
-	.inverted_b	= 0,
-};
-
-static struct platform_device rotary_encoder_device = {
-	.name		= "rotary-encoder",
-	.id		= 0,
-	.dev		= {
-		.platform_data = &raumfeld_rotary_encoder_info,
-	}
-};
-
-/**
- * GPIO buttons
- */
-
-static struct gpio_keys_button gpio_keys_button[] = {
-	{
-		.code			= KEY_F1,
-		.type			= EV_KEY,
-		.gpio			= GPIO_KEY1,
-		.active_low		= 1,
-		.wakeup			= 0,
-		.debounce_interval	= 5, /* ms */
-		.desc			= "Button 1",
-	},
-	{
-		.code			= KEY_F2,
-		.type			= EV_KEY,
-		.gpio			= GPIO_KEY2,
-		.active_low		= 1,
-		.wakeup			= 0,
-		.debounce_interval	= 5, /* ms */
-		.desc			= "Button 2",
-	},
-	{
-		.code			= KEY_F3,
-		.type			= EV_KEY,
-		.gpio			= GPIO_KEY3,
-		.active_low		= 1,
-		.wakeup			= 0,
-		.debounce_interval	= 5, /* ms */
-		.desc			= "Button 3",
-	},
-	{
-		.code			= KEY_F4,
-		.type			= EV_KEY,
-		.gpio			= GPIO_RESCUE_BOOT,
-		.active_low		= 0,
-		.wakeup			= 0,
-		.debounce_interval	= 5, /* ms */
-		.desc			= "rescue boot button",
-	},
-	{
-		.code			= KEY_F5,
-		.type			= EV_KEY,
-		.gpio			= GPIO_DOCK_DETECT,
-		.active_low		= 1,
-		.wakeup			= 0,
-		.debounce_interval	= 5, /* ms */
-		.desc			= "dock detect",
-	},
-	{
-		.code			= KEY_F6,
-		.type			= EV_KEY,
-		.gpio			= GPIO_ON_OFF,
-		.active_low		= 0,
-		.wakeup			= 0,
-		.debounce_interval	= 5, /* ms */
-		.desc			= "on_off button",
-	},
-};
-
-static struct gpio_keys_platform_data gpio_keys_platform_data = {
-	.buttons	= gpio_keys_button,
-	.nbuttons	= ARRAY_SIZE(gpio_keys_button),
-	.rep		= 0,
-};
-
-static struct platform_device raumfeld_gpio_keys_device = {
-	.name	= "gpio-keys",
-	.id	= -1,
-	.dev 	= {
-		.platform_data	= &gpio_keys_platform_data,
-	}
-};
-
-/**
- * GPIO LEDs
- */
-
-static struct gpio_led raumfeld_leds[] = {
-	{
-		.name		= "raumfeld:1",
-		.gpio		= GPIO_LED1,
-		.active_low	= 1,
-		.default_state	= LEDS_GPIO_DEFSTATE_ON,
-	},
-	{
-		.name		= "raumfeld:2",
-		.gpio		= GPIO_LED2,
-		.active_low	= 0,
-		.default_state	= LEDS_GPIO_DEFSTATE_OFF,
-	}
-};
-
-static struct gpio_led_platform_data raumfeld_led_platform_data = {
-	.leds		= raumfeld_leds,
-	.num_leds	= ARRAY_SIZE(raumfeld_leds),
-};
-
-static struct platform_device raumfeld_led_device = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data = &raumfeld_led_platform_data,
-	},
-};
-
-/**
- * One-wire (W1 bus) support
- */
-
-static void w1_enable_external_pullup(int enable)
-{
-	gpio_set_value(GPIO_W1_PULLUP_ENABLE, enable);
-	msleep(100);
-}
-
-static struct w1_gpio_platform_data w1_gpio_platform_data = {
-	.pin			= GPIO_ONE_WIRE,
-	.is_open_drain		= 0,
-	.enable_external_pullup	= w1_enable_external_pullup,
-};
-
-struct platform_device raumfeld_w1_gpio_device = {
-	.name	= "w1-gpio",
-	.dev	= {
-		.platform_data = &w1_gpio_platform_data
-	}
-};
-
-static void __init raumfeld_w1_init(void)
-{
-	int ret = gpio_request(GPIO_W1_PULLUP_ENABLE,
-				"W1 external pullup enable");
-
-	if (ret < 0)
-		pr_warning("Unable to request GPIO_W1_PULLUP_ENABLE\n");
-	else
-		gpio_direction_output(GPIO_W1_PULLUP_ENABLE, 0);
-
-	platform_device_register(&raumfeld_w1_gpio_device);
-}
-
-/**
- * Framebuffer device
- */
-
-/* PWM controlled backlight */
-static struct platform_pwm_backlight_data raumfeld_pwm_backlight_data = {
-	.pwm_id		= 0,
-	.max_brightness	= 100,
-	.dft_brightness	= 100,
-	/* 10000 ns = 10 ms ^= 100 kHz */
-	.pwm_period_ns	= 10000,
-};
-
-static struct platform_device raumfeld_pwm_backlight_device = {
-	.name	= "pwm-backlight",
-	.dev	= {
-		.parent		= &pxa27x_device_pwm0.dev,
-		.platform_data	= &raumfeld_pwm_backlight_data,
-	}
-};
-
-/* LT3593 controlled backlight */
-static struct gpio_led raumfeld_lt3593_led = {
-	.name		= "backlight",
-	.gpio		= mfp_to_gpio(MFP_PIN_GPIO17),
-	.default_state	= LEDS_GPIO_DEFSTATE_ON,
-};
-
-static struct gpio_led_platform_data raumfeld_lt3593_platform_data = {
-	.leds		= &raumfeld_lt3593_led,
-	.num_leds	= 1,
-};
-
-static struct platform_device raumfeld_lt3593_device = {
-	.name	= "leds-lt3593",
-	.id	= -1,
-	.dev	= {
-		.platform_data = &raumfeld_lt3593_platform_data,
-	},
-};
-
-static struct pxafb_mode_info sharp_lq043t3dx02_mode = {
-	.pixclock	= 111000,
-	.xres		= 480,
-	.yres		= 272,
-	.bpp		= 16,
-	.hsync_len	= 41,
-	.left_margin	= 2,
-	.right_margin	= 1,
-	.vsync_len	= 10,
-	.upper_margin	= 3,
-	.lower_margin	= 1,
-	.sync		= 0,
-};
-
-static struct pxafb_mach_info raumfeld_sharp_lcd_info = {
-	.modes		= &sharp_lq043t3dx02_mode,
-	.num_modes	= 1,
-	.video_mem_size = 0x400000,
-	.lcd_conn	= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
-#ifdef CONFIG_PXA3XX_GCU
-	.acceleration_enabled = 1,
-#endif
-};
-
-static void __init raumfeld_lcd_init(void)
-{
-	int ret;
-
-	ret = gpio_request(GPIO_TFT_VA_EN, "display VA enable");
-	if (ret < 0)
-		pr_warning("Unable to request GPIO_TFT_VA_EN\n");
-	else
-		gpio_direction_output(GPIO_TFT_VA_EN, 1);
-
-	msleep(100);
-
-	ret = gpio_request(GPIO_DISPLAY_ENABLE, "display enable");
-	if (ret < 0)
-		pr_warning("Unable to request GPIO_DISPLAY_ENABLE\n");
-	else
-		gpio_direction_output(GPIO_DISPLAY_ENABLE, 1);
-
-	/* Hardware revision 2 has the backlight regulator controlled
-	 * by an LT3593, earlier and later devices use PWM for that. */
-	if ((system_rev & 0xff) == 2) {
-		platform_device_register(&raumfeld_lt3593_device);
-	} else {
-		mfp_cfg_t raumfeld_pwm_pin_config = GPIO17_PWM0_OUT;
-		pxa3xx_mfp_config(&raumfeld_pwm_pin_config, 1);
-		platform_device_register(&raumfeld_pwm_backlight_device);
-	}
-
-	pxa_set_fb_info(NULL, &raumfeld_sharp_lcd_info);
-	platform_device_register(&pxa3xx_device_gcu);
-}
-
-/**
- * SPI devices
- */
-
-struct spi_gpio_platform_data raumfeld_spi_platform_data = {
-	.sck		= GPIO_SPI_CLK,
-	.mosi		= GPIO_SPI_MOSI,
-	.miso		= GPIO_SPI_MISO,
-	.num_chipselect	= 3,
-};
-
-static struct platform_device raumfeld_spi_device = {
-	.name	= "spi_gpio",
-	.id	= 0,
-	.dev 	= {
-		.platform_data	= &raumfeld_spi_platform_data,
-	}
-};
-
-static struct lis3lv02d_platform_data lis3_pdata = {
-	.click_flags 	= LIS3_CLICK_SINGLE_X |
-			  LIS3_CLICK_SINGLE_Y |
-			  LIS3_CLICK_SINGLE_Z,
-	.irq_cfg	= LIS3_IRQ1_CLICK | LIS3_IRQ2_CLICK,
-	.wakeup_flags	= LIS3_WAKEUP_X_LO | LIS3_WAKEUP_X_HI |
-			  LIS3_WAKEUP_Y_LO | LIS3_WAKEUP_Y_HI |
-			  LIS3_WAKEUP_Z_LO | LIS3_WAKEUP_Z_HI,
-	.wakeup_thresh	= 10,
-	.click_thresh_x = 10,
-	.click_thresh_y = 10,
-	.click_thresh_z = 10,
-};
-
-#define SPI_AK4104	\
-{			\
-	.modalias	= "ak4104-codec",	\
-	.max_speed_hz	= 10000,		\
-	.bus_num	= 0,			\
-	.chip_select	= 0,			\
-	.controller_data = (void *) GPIO_SPDIF_CS,	\
-}
-
-#define SPI_LIS3	\
-{			\
-	.modalias	= "lis3lv02d_spi",	\
-	.max_speed_hz	= 1000000,		\
-	.bus_num	= 0,			\
-	.chip_select	= 1,			\
-	.controller_data = (void *) GPIO_ACCEL_CS,	\
-	.platform_data	= &lis3_pdata,		\
-	.irq		= PXA_GPIO_TO_IRQ(GPIO_ACCEL_IRQ),	\
-}
-
-#define SPI_DAC7512	\
-{	\
-	.modalias	= "dac7512",		\
-	.max_speed_hz	= 1000000,		\
-	.bus_num	= 0,			\
-	.chip_select	= 2,			\
-	.controller_data = (void *) GPIO_MCLK_DAC_CS,	\
-}
-
-static struct spi_board_info connector_spi_devices[] __initdata = {
-	SPI_AK4104,
-	SPI_DAC7512,
-};
-
-static struct spi_board_info speaker_spi_devices[] __initdata = {
-	SPI_DAC7512,
-};
-
-static struct spi_board_info controller_spi_devices[] __initdata = {
-	SPI_LIS3,
-};
-
-/**
- * MMC for Marvell Libertas 8688 via SDIO
- */
-
-static int raumfeld_mci_init(struct device *dev, irq_handler_t isr, void *data)
-{
-	gpio_set_value(GPIO_W2W_RESET, 1);
-	gpio_set_value(GPIO_W2W_PDN, 1);
-
-	return 0;
-}
-
-static void raumfeld_mci_exit(struct device *dev, void *data)
-{
-	gpio_set_value(GPIO_W2W_RESET, 0);
-	gpio_set_value(GPIO_W2W_PDN, 0);
-}
-
-static struct pxamci_platform_data raumfeld_mci_platform_data = {
-	.init			= raumfeld_mci_init,
-	.exit			= raumfeld_mci_exit,
-	.detect_delay_ms	= 200,
-	.gpio_card_detect	= -1,
-	.gpio_card_ro		= -1,
-	.gpio_power		= -1,
-};
-
-/*
- * External power / charge logic
- */
-
-static int power_supply_init(struct device *dev)
-{
-	return 0;
-}
-
-static void power_supply_exit(struct device *dev)
-{
-}
-
-static int raumfeld_is_ac_online(void)
-{
-	return !gpio_get_value(GPIO_CHARGE_DC_OK);
-}
-
-static int raumfeld_is_usb_online(void)
-{
-	return 0;
-}
-
-static char *raumfeld_power_supplicants[] = { "ds2760-battery.0" };
-
-static void raumfeld_power_signal_charged(void)
-{
-	struct power_supply *psy =
-		power_supply_get_by_name(raumfeld_power_supplicants[0]);
-
-	if (psy)
-		power_supply_set_battery_charged(psy);
-}
-
-static int raumfeld_power_resume(void)
-{
-	/* check if GPIO_CHARGE_DONE went low while we were sleeping */
-	if (!gpio_get_value(GPIO_CHARGE_DONE))
-		raumfeld_power_signal_charged();
-
-	return 0;
-}
-
-static struct pda_power_pdata power_supply_info = {
-	.init			= power_supply_init,
-	.is_ac_online		= raumfeld_is_ac_online,
-	.is_usb_online		= raumfeld_is_usb_online,
-	.exit			= power_supply_exit,
-	.supplied_to		= raumfeld_power_supplicants,
-	.num_supplicants	= ARRAY_SIZE(raumfeld_power_supplicants),
-	.resume			= raumfeld_power_resume,
-};
-
-static struct resource power_supply_resources[] = {
-	{
-		.name  = "ac",
-		.flags = IORESOURCE_IRQ |
-			 IORESOURCE_IRQ_HIGHEDGE | IORESOURCE_IRQ_LOWEDGE,
-		.start = GPIO_CHARGE_DC_OK,
-		.end   = GPIO_CHARGE_DC_OK,
-	},
-};
-
-static irqreturn_t charge_done_irq(int irq, void *dev_id)
-{
-	raumfeld_power_signal_charged();
-	return IRQ_HANDLED;
-}
-
-static struct platform_device raumfeld_power_supply = {
-	.name = "pda-power",
-	.id   = -1,
-	.dev  = {
-		.platform_data = &power_supply_info,
-	},
-	.resource      = power_supply_resources,
-	.num_resources = ARRAY_SIZE(power_supply_resources),
-};
-
-static void __init raumfeld_power_init(void)
-{
-	int ret;
-
-	/* Set PEN2 high to enable maximum charge current */
-	ret = gpio_request(GPIO_CHRG_PEN2, "CHRG_PEN2");
-	if (ret < 0)
-		pr_warning("Unable to request GPIO_CHRG_PEN2\n");
-	else
-		gpio_direction_output(GPIO_CHRG_PEN2, 1);
-
-	ret = gpio_request(GPIO_CHARGE_DC_OK, "CABLE_DC_OK");
-	if (ret < 0)
-		pr_warning("Unable to request GPIO_CHARGE_DC_OK\n");
-
-	ret = gpio_request(GPIO_CHARGE_USB_SUSP, "CHARGE_USB_SUSP");
-	if (ret < 0)
-		pr_warning("Unable to request GPIO_CHARGE_USB_SUSP\n");
-	else
-		gpio_direction_output(GPIO_CHARGE_USB_SUSP, 0);
-
-	power_supply_resources[0].start = gpio_to_irq(GPIO_CHARGE_DC_OK);
-	power_supply_resources[0].end = gpio_to_irq(GPIO_CHARGE_DC_OK);
-
-	ret = request_irq(gpio_to_irq(GPIO_CHARGE_DONE),
-			&charge_done_irq, IORESOURCE_IRQ_LOWEDGE,
-			"charge_done", NULL);
-
-	if (ret < 0)
-		printk(KERN_ERR "%s: unable to register irq %d\n", __func__,
-			GPIO_CHARGE_DONE);
-	else
-		platform_device_register(&raumfeld_power_supply);
-}
-
-/* Fixed regulator for AUDIO_VA, 0-0048 maps to the cs4270 codec device */
-
-static struct regulator_consumer_supply audio_va_consumer_supply =
-	REGULATOR_SUPPLY("va", "0-0048");
-
-struct regulator_init_data audio_va_initdata = {
-	.consumer_supplies = &audio_va_consumer_supply,
-	.num_consumer_supplies = 1,
-	.constraints = {
-		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
-	},
-};
-
-static struct fixed_voltage_config audio_va_config = {
-	.supply_name		= "audio_va",
-	.microvolts		= 5000000,
-	.gpio			= GPIO_AUDIO_VA_ENABLE,
-	.enable_high		= 1,
-	.enabled_at_boot	= 0,
-	.init_data		= &audio_va_initdata,
-};
-
-static struct platform_device audio_va_device = {
-	.name	= "reg-fixed-voltage",
-	.id	= 0,
-	.dev	= {
-		.platform_data = &audio_va_config,
-	},
-};
-
-/* Dummy supplies for Codec's VD/VLC */
-
-static struct regulator_consumer_supply audio_dummy_supplies[] = {
-	REGULATOR_SUPPLY("vd", "0-0048"),
-	REGULATOR_SUPPLY("vlc", "0-0048"),
-};
-
-struct regulator_init_data audio_dummy_initdata = {
-	.consumer_supplies = audio_dummy_supplies,
-	.num_consumer_supplies = ARRAY_SIZE(audio_dummy_supplies),
-	.constraints = {
-		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
-	},
-};
-
-static struct fixed_voltage_config audio_dummy_config = {
-	.supply_name		= "audio_vd",
-	.microvolts		= 3300000,
-	.gpio			= -1,
-	.init_data		= &audio_dummy_initdata,
-};
-
-static struct platform_device audio_supply_dummy_device = {
-	.name	= "reg-fixed-voltage",
-	.id	= 1,
-	.dev	= {
-		.platform_data = &audio_dummy_config,
-	},
-};
-
-static struct platform_device *audio_regulator_devices[] = {
-	&audio_va_device,
-	&audio_supply_dummy_device,
-};
-
-/**
- * Regulator support via MAX8660
- */
-
-static struct regulator_consumer_supply vcc_mmc_supply =
-	REGULATOR_SUPPLY("vmmc", "pxa2xx-mci.0");
-
-static struct regulator_init_data vcc_mmc_init_data = {
-	.constraints = {
-		.min_uV			= 3300000,
-		.max_uV			= 3300000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL,
-		.valid_ops_mask		= REGULATOR_CHANGE_STATUS |
-					  REGULATOR_CHANGE_VOLTAGE |
-					  REGULATOR_CHANGE_MODE,
-	},
-	.consumer_supplies = &vcc_mmc_supply,
-	.num_consumer_supplies = 1,
-};
-
-struct max8660_subdev_data max8660_v6_subdev_data = {
-	.id		= MAX8660_V6,
-	.name		= "vmmc",
-	.platform_data	= &vcc_mmc_init_data,
-};
-
-static struct max8660_platform_data max8660_pdata = {
-	.subdevs = &max8660_v6_subdev_data,
-	.num_subdevs = 1,
-};
-
-/**
- * I2C devices
- */
-
-static struct i2c_board_info raumfeld_pwri2c_board_info = {
-	.type		= "max8660",
-	.addr		= 0x34,
-	.platform_data	= &max8660_pdata,
-};
-
-static struct i2c_board_info raumfeld_connector_i2c_board_info __initdata = {
-	.type	= "cs4270",
-	.addr	= 0x48,
-};
-
-static struct eeti_ts_platform_data eeti_ts_pdata = {
-	.irq_active_high = 1,
-};
-
-static struct i2c_board_info raumfeld_controller_i2c_board_info __initdata = {
-	.type	= "eeti_ts",
-	.addr	= 0x0a,
-	.irq	= PXA_GPIO_TO_IRQ(GPIO_TOUCH_IRQ),
-	.platform_data = &eeti_ts_pdata,
-};
-
-static struct platform_device *raumfeld_common_devices[] = {
-	&raumfeld_gpio_keys_device,
-	&raumfeld_led_device,
-	&raumfeld_spi_device,
-};
-
-static void __init raumfeld_audio_init(void)
-{
-	int ret;
-
-	ret = gpio_request(GPIO_CODEC_RESET, "cs4270 reset");
-	if (ret < 0)
-		pr_warning("unable to request GPIO_CODEC_RESET\n");
-	else
-		gpio_direction_output(GPIO_CODEC_RESET, 1);
-
-	ret = gpio_request(GPIO_SPDIF_RESET, "ak4104 s/pdif reset");
-	if (ret < 0)
-		pr_warning("unable to request GPIO_SPDIF_RESET\n");
-	else
-		gpio_direction_output(GPIO_SPDIF_RESET, 1);
-
-	ret = gpio_request(GPIO_MCLK_RESET, "MCLK reset");
-	if (ret < 0)
-		pr_warning("unable to request GPIO_MCLK_RESET\n");
-	else
-		gpio_direction_output(GPIO_MCLK_RESET, 1);
-
-	platform_add_devices(ARRAY_AND_SIZE(audio_regulator_devices));
-}
-
-static void __init raumfeld_common_init(void)
-{
-	int ret;
-
-	/* The on/off button polarity has changed after revision 1 */
-	if ((system_rev & 0xff) > 1) {
-		int i;
-
-		for (i = 0; i < ARRAY_SIZE(gpio_keys_button); i++)
-			if (!strcmp(gpio_keys_button[i].desc, "on_off button"))
-				gpio_keys_button[i].active_low = 1;
-	}
-
-	enable_irq_wake(IRQ_WAKEUP0);
-
-	pxa3xx_set_nand_info(&raumfeld_nand_info);
-	pxa3xx_set_i2c_power_info(NULL);
-	pxa_set_ohci_info(&raumfeld_ohci_info);
-	pxa_set_mci_info(&raumfeld_mci_platform_data);
-	pxa_set_i2c_info(NULL);
-	pxa_set_ffuart_info(NULL);
-
-	ret = gpio_request(GPIO_W2W_RESET, "Wi2Wi reset");
-	if (ret < 0)
-		pr_warning("Unable to request GPIO_W2W_RESET\n");
-	else
-		gpio_direction_output(GPIO_W2W_RESET, 0);
-
-	ret = gpio_request(GPIO_W2W_PDN, "Wi2Wi powerup");
-	if (ret < 0)
-		pr_warning("Unable to request GPIO_W2W_PDN\n");
-	else
-		gpio_direction_output(GPIO_W2W_PDN, 0);
-
-	/* this can be used to switch off the device */
-	ret = gpio_request(GPIO_SHUTDOWN_SUPPLY, "supply shutdown");
-	if (ret < 0)
-		pr_warning("Unable to request GPIO_SHUTDOWN_SUPPLY\n");
-	else
-		gpio_direction_output(GPIO_SHUTDOWN_SUPPLY, 0);
-
-	platform_add_devices(ARRAY_AND_SIZE(raumfeld_common_devices));
-	i2c_register_board_info(1, &raumfeld_pwri2c_board_info, 1);
-}
-
-static void __init raumfeld_controller_init(void)
-{
-	int ret;
-
-	pxa3xx_mfp_config(ARRAY_AND_SIZE(raumfeld_controller_pin_config));
-	platform_device_register(&rotary_encoder_device);
-	spi_register_board_info(ARRAY_AND_SIZE(controller_spi_devices));
-	i2c_register_board_info(0, &raumfeld_controller_i2c_board_info, 1);
-
-	ret = gpio_request(GPIO_SHUTDOWN_BATT, "battery shutdown");
-	if (ret < 0)
-		pr_warning("Unable to request GPIO_SHUTDOWN_BATT\n");
-	else
-		gpio_direction_output(GPIO_SHUTDOWN_BATT, 0);
-
-	raumfeld_common_init();
-	raumfeld_power_init();
-	raumfeld_lcd_init();
-	raumfeld_w1_init();
-}
-
-static void __init raumfeld_connector_init(void)
-{
-	pxa3xx_mfp_config(ARRAY_AND_SIZE(raumfeld_connector_pin_config));
-	spi_register_board_info(ARRAY_AND_SIZE(connector_spi_devices));
-	i2c_register_board_info(0, &raumfeld_connector_i2c_board_info, 1);
-
-	platform_device_register(&smc91x_device);
-
-	raumfeld_audio_init();
-	raumfeld_common_init();
-}
-
-static void __init raumfeld_speaker_init(void)
-{
-	pxa3xx_mfp_config(ARRAY_AND_SIZE(raumfeld_speaker_pin_config));
-	spi_register_board_info(ARRAY_AND_SIZE(speaker_spi_devices));
-	i2c_register_board_info(0, &raumfeld_connector_i2c_board_info, 1);
-
-	platform_device_register(&smc91x_device);
-	platform_device_register(&rotary_encoder_device);
-
-	raumfeld_audio_init();
-	raumfeld_common_init();
-}
-
-/* physical memory regions */
-#define	RAUMFELD_SDRAM_BASE	0xa0000000	/* SDRAM region */
-
-#ifdef CONFIG_MACH_RAUMFELD_RC
-MACHINE_START(RAUMFELD_RC, "Raumfeld Controller")
-	.atag_offset	= 0x100,
-	.init_machine	= raumfeld_controller_init,
-	.map_io		= pxa3xx_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa3xx_init_irq,
-	.handle_irq	= pxa3xx_handle_irq,
-	.timer		= &pxa_timer,
-	.restart	= pxa_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_RAUMFELD_CONNECTOR
-MACHINE_START(RAUMFELD_CONNECTOR, "Raumfeld Connector")
-	.atag_offset	= 0x100,
-	.init_machine	= raumfeld_connector_init,
-	.map_io		= pxa3xx_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa3xx_init_irq,
-	.handle_irq	= pxa3xx_handle_irq,
-	.timer		= &pxa_timer,
-	.restart	= pxa_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_RAUMFELD_SPEAKER
-MACHINE_START(RAUMFELD_SPEAKER, "Raumfeld Speaker")
-	.atag_offset	= 0x100,
-	.init_machine	= raumfeld_speaker_init,
-	.map_io		= pxa3xx_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa3xx_init_irq,
-	.handle_irq	= pxa3xx_handle_irq,
-	.timer		= &pxa_timer,
-	.restart	= pxa_restart,
-MACHINE_END
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/reset.c b/ANDROID_3.4.5/arch/arm/mach-pxa/reset.c
deleted file mode 100644
index b4528899..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/reset.c
+++ /dev/null
@@ -1,106 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/io.h>
-#include <asm/proc-fns.h>
-#include <asm/system_misc.h>
-
-#include <mach/regs-ost.h>
-#include <mach/reset.h>
-
-unsigned int reset_status;
-EXPORT_SYMBOL(reset_status);
-
-static void do_hw_reset(void);
-
-static int reset_gpio = -1;
-
-int init_gpio_reset(int gpio, int output, int level)
-{
-	int rc;
-
-	rc = gpio_request(gpio, "reset generator");
-	if (rc) {
-		printk(KERN_ERR "Can't request reset_gpio\n");
-		goto out;
-	}
-
-	if (output)
-		rc = gpio_direction_output(gpio, level);
-	else
-		rc = gpio_direction_input(gpio);
-	if (rc) {
-		printk(KERN_ERR "Can't configure reset_gpio\n");
-		gpio_free(gpio);
-		goto out;
-	}
-
-out:
-	if (!rc)
-		reset_gpio = gpio;
-
-	return rc;
-}
-
-/*
- * Trigger GPIO reset.
- * This covers various types of logic connecting gpio pin
- * to RESET pins (nRESET or GPIO_RESET):
- */
-static void do_gpio_reset(void)
-{
-	BUG_ON(reset_gpio == -1);
-
-	/* drive it low */
-	gpio_direction_output(reset_gpio, 0);
-	mdelay(2);
-	/* rising edge or drive high */
-	gpio_set_value(reset_gpio, 1);
-	mdelay(2);
-	/* falling edge */
-	gpio_set_value(reset_gpio, 0);
-
-	/* give it some time */
-	mdelay(10);
-
-	WARN_ON(1);
-	/* fallback */
-	do_hw_reset();
-}
-
-static void do_hw_reset(void)
-{
-	/* Initialize the watchdog and let it fire */
-	OWER = OWER_WME;
-	OSSR = OSSR_M3;
-	OSMR3 = OSCR + 368640;	/* ... in 100 ms */
-}
-
-void pxa_restart(char mode, const char *cmd)
-{
-	local_irq_disable();
-	local_fiq_disable();
-
-	clear_reset_status(RESET_STATUS_ALL);
-
-	switch (mode) {
-	case 's':
-		/* Jump into ROM at address 0 */
-		soft_restart(0);
-		break;
-	case 'g':
-		do_gpio_reset();
-		break;
-	case 'h':
-	default:
-		do_hw_reset();
-		break;
-	}
-}
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/saar.c b/ANDROID_3.4.5/arch/arm/mach-pxa/saar.c
deleted file mode 100644
index 86c95a5d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/saar.c
+++ /dev/null
@@ -1,607 +0,0 @@
-/*
- *  linux/arch/arm/mach-pxa/saar.c
- *
- *  Support for the Marvell PXA930 Handheld Platform (aka SAAR)
- *
- *  Copyright (C) 2007-2008 Marvell International Ltd.
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  publishhed by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/clk.h>
-#include <linux/gpio.h>
-#include <linux/delay.h>
-#include <linux/fb.h>
-#include <linux/i2c.h>
-#include <linux/i2c/pxa-i2c.h>
-#include <linux/smc91x.h>
-#include <linux/mfd/da903x.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/onenand.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
-
-#include <mach/pxa930.h>
-#include <mach/pxafb.h>
-
-#include "devices.h"
-#include "generic.h"
-
-#define GPIO_LCD_RESET		(16)
-
-/* SAAR MFP configurations */
-static mfp_cfg_t saar_mfp_cfg[] __initdata = {
-	/* LCD */
-	GPIO23_LCD_DD0,
-	GPIO24_LCD_DD1,
-	GPIO25_LCD_DD2,
-	GPIO26_LCD_DD3,
-	GPIO27_LCD_DD4,
-	GPIO28_LCD_DD5,
-	GPIO29_LCD_DD6,
-	GPIO44_LCD_DD7,
-	GPIO21_LCD_CS,
-	GPIO22_LCD_VSYNC,
-	GPIO17_LCD_FCLK_RD,
-	GPIO18_LCD_LCLK_A0,
-	GPIO19_LCD_PCLK_WR,
-	GPIO16_GPIO, /* LCD reset */
-
-	/* Ethernet */
-	DF_nCS1_nCS3,
-	GPIO97_GPIO,
-
-	/* DFI */
-	DF_INT_RnB_ND_INT_RnB,
-	DF_nRE_nOE_ND_nRE,
-	DF_nWE_ND_nWE,
-	DF_CLE_nOE_ND_CLE,
-	DF_nADV1_ALE_ND_ALE,
-	DF_nADV2_ALE_nCS3,
-	DF_nCS0_ND_nCS0,
-	DF_IO0_ND_IO0,
-	DF_IO1_ND_IO1,
-	DF_IO2_ND_IO2,
-	DF_IO3_ND_IO3,
-	DF_IO4_ND_IO4,
-	DF_IO5_ND_IO5,
-	DF_IO6_ND_IO6,
-	DF_IO7_ND_IO7,
-	DF_IO8_ND_IO8,
-	DF_IO9_ND_IO9,
-	DF_IO10_ND_IO10,
-	DF_IO11_ND_IO11,
-	DF_IO12_ND_IO12,
-	DF_IO13_ND_IO13,
-	DF_IO14_ND_IO14,
-	DF_IO15_ND_IO15,
-};
-
-#define SAAR_ETH_PHYS	(0x14000000)
-
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.start	= (SAAR_ETH_PHYS + 0x300),
-		.end	= (SAAR_ETH_PHYS + 0xfffff),
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO97)),
-		.end	= PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO97)),
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	}
-};
-
-static struct smc91x_platdata saar_smc91x_info = {
-	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT | SMC91X_USE_DMA,
-};
-
-static struct platform_device smc91x_device = {
-	.name		= "smc91x",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(smc91x_resources),
-	.resource	= smc91x_resources,
-	.dev		= {
-		.platform_data = &saar_smc91x_info,
-	},
-};
-
-#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
-static uint16_t lcd_power_on[] = {
-	/* single frame */
-	SMART_CMD_NOOP,
-	SMART_CMD(0x00),
-	SMART_DELAY(0),
-
-	SMART_CMD_NOOP,
-	SMART_CMD(0x00),
-	SMART_DELAY(0),
-
-	SMART_CMD_NOOP,
-	SMART_CMD(0x00),
-	SMART_DELAY(0),
-
-	SMART_CMD_NOOP,
-	SMART_CMD(0x00),
-	SMART_DELAY(10),
-
-	/* calibration control */
-	SMART_CMD(0x00),
-	SMART_CMD(0xA4),
-	SMART_DAT(0x80),
-	SMART_DAT(0x01),
-	SMART_DELAY(150),
-
-	/*Power-On Init sequence*/
-	SMART_CMD(0x00),	/* output ctrl */
-	SMART_CMD(0x01),
-	SMART_DAT(0x01),
-	SMART_DAT(0x00),
-	SMART_CMD(0x00),	/* wave ctrl */
-	SMART_CMD(0x02),
-	SMART_DAT(0x07),
-	SMART_DAT(0x00),
-	SMART_CMD(0x00),
-	SMART_CMD(0x03),	/* entry mode */
-	SMART_DAT(0xD0),
-	SMART_DAT(0x30),
-	SMART_CMD(0x00),
-	SMART_CMD(0x08),	/* display ctrl 2 */
-	SMART_DAT(0x08),
-	SMART_DAT(0x08),
-	SMART_CMD(0x00),
-	SMART_CMD(0x09),	/* display ctrl 3 */
-	SMART_DAT(0x04),
-	SMART_DAT(0x2F),
-	SMART_CMD(0x00),
-	SMART_CMD(0x0A),	/* display ctrl 4 */
-	SMART_DAT(0x00),
-	SMART_DAT(0x08),
-	SMART_CMD(0x00),
-	SMART_CMD(0x0D),	/* Frame Marker position */
-	SMART_DAT(0x00),
-	SMART_DAT(0x08),
-	SMART_CMD(0x00),
-	SMART_CMD(0x60),	/* Driver output control */
-	SMART_DAT(0x27),
-	SMART_DAT(0x00),
-	SMART_CMD(0x00),
-	SMART_CMD(0x61),	/* Base image display control */
-	SMART_DAT(0x00),
-	SMART_DAT(0x01),
-	SMART_CMD(0x00),
-	SMART_CMD(0x30),	/* Y settings 30h-3Dh */
-	SMART_DAT(0x07),
-	SMART_DAT(0x07),
-	SMART_CMD(0x00),
-	SMART_CMD(0x31),
-	SMART_DAT(0x00),
-	SMART_DAT(0x07),
-	SMART_CMD(0x00),
-	SMART_CMD(0x32),	/* Timing(3), ASW HOLD=0.5CLK */
-	SMART_DAT(0x04),
-	SMART_DAT(0x00),
-	SMART_CMD(0x00),
-	SMART_CMD(0x33),	/* Timing(4), CKV ST=0CLK, CKV ED=1CLK */
-	SMART_DAT(0x03),
-	SMART_DAT(0x03),
-	SMART_CMD(0x00),
-	SMART_CMD(0x34),
-	SMART_DAT(0x00),
-	SMART_DAT(0x00),
-	SMART_CMD(0x00),
-	SMART_CMD(0x35),
-	SMART_DAT(0x02),
-	SMART_DAT(0x05),
-	SMART_CMD(0x00),
-	SMART_CMD(0x36),
-	SMART_DAT(0x1F),
-	SMART_DAT(0x1F),
-	SMART_CMD(0x00),
-	SMART_CMD(0x37),
-	SMART_DAT(0x07),
-	SMART_DAT(0x07),
-	SMART_CMD(0x00),
-	SMART_CMD(0x38),
-	SMART_DAT(0x00),
-	SMART_DAT(0x07),
-	SMART_CMD(0x00),
-	SMART_CMD(0x39),
-	SMART_DAT(0x04),
-	SMART_DAT(0x00),
-	SMART_CMD(0x00),
-	SMART_CMD(0x3A),
-	SMART_DAT(0x03),
-	SMART_DAT(0x03),
-	SMART_CMD(0x00),
-	SMART_CMD(0x3B),
-	SMART_DAT(0x00),
-	SMART_DAT(0x00),
-	SMART_CMD(0x00),
-	SMART_CMD(0x3C),
-	SMART_DAT(0x02),
-	SMART_DAT(0x05),
-	SMART_CMD(0x00),
-	SMART_CMD(0x3D),
-	SMART_DAT(0x1F),
-	SMART_DAT(0x1F),
-	SMART_CMD(0x00),	/* Display control 1 */
-	SMART_CMD(0x07),
-	SMART_DAT(0x00),
-	SMART_DAT(0x01),
-	SMART_CMD(0x00),	/* Power control 5 */
-	SMART_CMD(0x17),
-	SMART_DAT(0x00),
-	SMART_DAT(0x01),
-	SMART_CMD(0x00),	/* Power control 1 */
-	SMART_CMD(0x10),
-	SMART_DAT(0x10),
-	SMART_DAT(0xB0),
-	SMART_CMD(0x00),	/* Power control 2 */
-	SMART_CMD(0x11),
-	SMART_DAT(0x01),
-	SMART_DAT(0x30),
-	SMART_CMD(0x00),	/* Power control 3 */
-	SMART_CMD(0x12),
-	SMART_DAT(0x01),
-	SMART_DAT(0x9E),
-	SMART_CMD(0x00),	/* Power control 4 */
-	SMART_CMD(0x13),
-	SMART_DAT(0x17),
-	SMART_DAT(0x00),
-	SMART_CMD(0x00),	/* Power control 3 */
-	SMART_CMD(0x12),
-	SMART_DAT(0x01),
-	SMART_DAT(0xBE),
-	SMART_DELAY(100),
-
-	/* display mode : 240*320 */
-	SMART_CMD(0x00),	/* RAM address set(H) 0*/
-	SMART_CMD(0x20),
-	SMART_DAT(0x00),
-	SMART_DAT(0x00),
-	SMART_CMD(0x00),	/* RAM address set(V)   4*/
-	SMART_CMD(0x21),
-	SMART_DAT(0x00),
-	SMART_DAT(0x00),
-	SMART_CMD(0x00),	/* Start of Window RAM address set(H) 8*/
-	SMART_CMD(0x50),
-	SMART_DAT(0x00),
-	SMART_DAT(0x00),
-	SMART_CMD(0x00), 	/* End of Window RAM address set(H) 12*/
-	SMART_CMD(0x51),
-	SMART_DAT(0x00),
-	SMART_DAT(0xEF),
-	SMART_CMD(0x00),	/* Start of Window RAM address set(V) 16*/
-	SMART_CMD(0x52),
-	SMART_DAT(0x00),
-	SMART_DAT(0x00),
-	SMART_CMD(0x00),	/* End of Window RAM address set(V) 20*/
-	SMART_CMD(0x53),
-	SMART_DAT(0x01),
-	SMART_DAT(0x3F),
-	SMART_CMD(0x00), 	/* Panel interface control 1 */
-	SMART_CMD(0x90),
-	SMART_DAT(0x00),
-	SMART_DAT(0x1A),
-	SMART_CMD(0x00), 	/* Panel interface control 2 */
-	SMART_CMD(0x92),
-	SMART_DAT(0x04),
-	SMART_DAT(0x00),
-	SMART_CMD(0x00), 	/* Panel interface control 3 */
-	SMART_CMD(0x93),
-	SMART_DAT(0x00),
-	SMART_DAT(0x05),
-	SMART_DELAY(20),
-};
-
-static uint16_t lcd_panel_on[] = {
-	SMART_CMD(0x00),
-	SMART_CMD(0x07),
-	SMART_DAT(0x00),
-	SMART_DAT(0x21),
-	SMART_DELAY(1),
-
-	SMART_CMD(0x00),
-	SMART_CMD(0x07),
-	SMART_DAT(0x00),
-	SMART_DAT(0x61),
-	SMART_DELAY(100),
-
-	SMART_CMD(0x00),
-	SMART_CMD(0x07),
-	SMART_DAT(0x01),
-	SMART_DAT(0x73),
-	SMART_DELAY(1),
-};
-
-static uint16_t lcd_panel_off[] = {
-	SMART_CMD(0x00),
-	SMART_CMD(0x07),
-	SMART_DAT(0x00),
-	SMART_DAT(0x72),
-	SMART_DELAY(40),
-
-	SMART_CMD(0x00),
-	SMART_CMD(0x07),
-	SMART_DAT(0x00),
-	SMART_DAT(0x01),
-	SMART_DELAY(1),
-
-	SMART_CMD(0x00),
-	SMART_CMD(0x07),
-	SMART_DAT(0x00),
-	SMART_DAT(0x00),
-	SMART_DELAY(1),
-};
-
-static uint16_t lcd_power_off[] = {
-	SMART_CMD(0x00),
-	SMART_CMD(0x10),
-	SMART_DAT(0x00),
-	SMART_DAT(0x80),
-
-	SMART_CMD(0x00),
-	SMART_CMD(0x11),
-	SMART_DAT(0x01),
-	SMART_DAT(0x60),
-
-	SMART_CMD(0x00),
-	SMART_CMD(0x12),
-	SMART_DAT(0x01),
-	SMART_DAT(0xAE),
-	SMART_DELAY(40),
-
-	SMART_CMD(0x00),
-	SMART_CMD(0x10),
-	SMART_DAT(0x00),
-	SMART_DAT(0x00),
-};
-
-static uint16_t update_framedata[] = {
-	/* set display ram: 240*320 */
-	SMART_CMD(0x00), /* RAM address set(H) 0*/
-	SMART_CMD(0x20),
-	SMART_DAT(0x00),
-	SMART_DAT(0x00),
-	SMART_CMD(0x00), /* RAM address set(V) 4*/
-	SMART_CMD(0x21),
-	SMART_DAT(0x00),
-	SMART_DAT(0x00),
-	SMART_CMD(0x00), /* Start of Window RAM address set(H) 8 */
-	SMART_CMD(0x50),
-	SMART_DAT(0x00),
-	SMART_DAT(0x00),
-	SMART_CMD(0x00), /* End of Window RAM address set(H) 12 */
-	SMART_CMD(0x51),
-	SMART_DAT(0x00),
-	SMART_DAT(0xEF),
-	SMART_CMD(0x00), /* Start of Window RAM address set(V) 16 */
-	SMART_CMD(0x52),
-	SMART_DAT(0x00),
-	SMART_DAT(0x00),
-	SMART_CMD(0x00), /* End of Window RAM address set(V) 20 */
-	SMART_CMD(0x53),
-	SMART_DAT(0x01),
-	SMART_DAT(0x3F),
-
-	/* wait for vsync cmd before transferring frame data */
-	SMART_CMD_WAIT_FOR_VSYNC,
-
-	/* write ram */
-	SMART_CMD(0x00),
-	SMART_CMD(0x22),
-
-	/* write frame data */
-	SMART_CMD_WRITE_FRAME,
-};
-
-static void ltm022a97a_lcd_power(int on, struct fb_var_screeninfo *var)
-{
-	static int pin_requested = 0;
-	struct fb_info *info = container_of(var, struct fb_info, var);
-	int err;
-
-	if (!pin_requested) {
-		err = gpio_request(GPIO_LCD_RESET, "lcd reset");
-		if (err) {
-			pr_err("failed to request gpio for LCD reset\n");
-			return;
-		}
-
-		gpio_direction_output(GPIO_LCD_RESET, 0);
-		pin_requested = 1;
-	}
-
-	if (on) {
-		gpio_set_value(GPIO_LCD_RESET, 0); msleep(100);
-		gpio_set_value(GPIO_LCD_RESET, 1); msleep(10);
-
-		pxafb_smart_queue(info, ARRAY_AND_SIZE(lcd_power_on));
-		pxafb_smart_queue(info, ARRAY_AND_SIZE(lcd_panel_on));
-	} else {
-		pxafb_smart_queue(info, ARRAY_AND_SIZE(lcd_panel_off));
-		pxafb_smart_queue(info, ARRAY_AND_SIZE(lcd_power_off));
-	}
-
-	err = pxafb_smart_flush(info);
-	if (err)
-		pr_err("%s: timed out\n", __func__);
-}
-
-static void ltm022a97a_update(struct fb_info *info)
-{
-	pxafb_smart_queue(info, ARRAY_AND_SIZE(update_framedata));
-	pxafb_smart_flush(info);
-}
-
-static struct pxafb_mode_info toshiba_ltm022a97a_modes[] = {
-	[0] = {
-		.xres			= 240,
-		.yres			= 320,
-		.bpp			= 16,
-		.a0csrd_set_hld		= 30,
-		.a0cswr_set_hld		= 30,
-		.wr_pulse_width		= 30,
-		.rd_pulse_width 	= 30,
-		.op_hold_time 		= 30,
-		.cmd_inh_time		= 60,
-
-		/* L_LCLK_A0 and L_LCLK_RD active low */
-		.sync			= FB_SYNC_HOR_HIGH_ACT |
-					  FB_SYNC_VERT_HIGH_ACT,
-	},
-};
-
-static struct pxafb_mach_info saar_lcd_info = {
-	.modes			= toshiba_ltm022a97a_modes,
-	.num_modes		= 1,
-	.lcd_conn		= LCD_SMART_PANEL_8BPP | LCD_PCLK_EDGE_FALL,
-	.pxafb_lcd_power	= ltm022a97a_lcd_power,
-	.smart_update		= ltm022a97a_update,
-};
-
-static void __init saar_init_lcd(void)
-{
-	pxa_set_fb_info(NULL, &saar_lcd_info);
-}
-#else
-static inline void saar_init_lcd(void) {}
-#endif
-
-#if defined(CONFIG_I2C_PXA) || defined(CONFIG_I2C_PXA_MODULE)
-static struct da9034_backlight_pdata saar_da9034_backlight = {
-	.output_current	= 4,	/* 4mA */
-};
-
-static struct da903x_subdev_info saar_da9034_subdevs[] = {
-	[0] = {
-		.name		= "da903x-backlight",
-		.id		= DA9034_ID_WLED,
-		.platform_data	= &saar_da9034_backlight,
-	},
-};
-
-static struct da903x_platform_data saar_da9034_info = {
-	.num_subdevs	= ARRAY_SIZE(saar_da9034_subdevs),
-	.subdevs	= saar_da9034_subdevs,
-};
-
-static struct i2c_board_info saar_i2c_info[] = {
-	[0] = {
-		.type		= "da9034",
-		.addr		= 0x34,
-		.platform_data	= &saar_da9034_info,
-		.irq		= PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO83)),
-	},
-};
-
-static void __init saar_init_i2c(void)
-{
-	pxa_set_i2c_info(NULL);
-	i2c_register_board_info(0, ARRAY_AND_SIZE(saar_i2c_info));
-}
-#else
-static inline void saar_init_i2c(void) {}
-#endif
-
-#if defined(CONFIG_MTD_ONENAND) || defined(CONFIG_MTD_ONENAND_MODULE)
-static struct mtd_partition saar_onenand_partitions[] = {
-	{
-		.name		= "bootloader",
-		.offset		= 0,
-		.size		= SZ_1M,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "reserved",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_128K,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "reserved",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_8M,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "kernel",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= (SZ_2M + SZ_1M),
-		.mask_flags	= 0,
-	}, {
-		.name		= "filesystem",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_32M + SZ_16M,
-		.mask_flags	= 0,
-	}
-};
-
-static struct onenand_platform_data saar_onenand_info = {
-	.parts		= saar_onenand_partitions,
-	.nr_parts	= ARRAY_SIZE(saar_onenand_partitions),
-};
-
-#define SMC_CS0_PHYS_BASE	(0x10000000)
-
-static struct resource saar_resource_onenand[] = {
-	[0] = {
-		.start	= SMC_CS0_PHYS_BASE,
-		.end	= SMC_CS0_PHYS_BASE + SZ_1M,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device saar_device_onenand = {
-	.name		= "onenand-flash",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &saar_onenand_info,
-	},
-	.resource	= saar_resource_onenand,
-	.num_resources	= ARRAY_SIZE(saar_resource_onenand),
-};
-
-static void __init saar_init_onenand(void)
-{
-	platform_device_register(&saar_device_onenand);
-}
-#else
-static void __init saar_init_onenand(void) {}
-#endif
-
-static void __init saar_init(void)
-{
-	/* initialize MFP configurations */
-	pxa3xx_mfp_config(ARRAY_AND_SIZE(saar_mfp_cfg));
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	platform_device_register(&smc91x_device);
-	saar_init_onenand();
-
-	saar_init_i2c();
-	saar_init_lcd();
-}
-
-MACHINE_START(SAAR, "PXA930 Handheld Platform (aka SAAR)")
-	/* Maintainer: Eric Miao <eric.miao@marvell.com> */
-	.atag_offset    = 0x100,
-	.map_io         = pxa3xx_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq       = pxa3xx_init_irq,
-	.handle_irq       = pxa3xx_handle_irq,
-	.timer          = &pxa_timer,
-	.init_machine   = saar_init,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/saarb.c b/ANDROID_3.4.5/arch/arm/mach-pxa/saarb.c
deleted file mode 100644
index 5aded5e6..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/saarb.c
+++ /dev/null
@@ -1,115 +0,0 @@
-/*
- *  linux/arch/arm/mach-pxa/saarb.c
- *
- *  Support for the Marvell Handheld Platform (aka SAARB)
- *
- *  Copyright (C) 2007-2010 Marvell International Ltd.
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  publishhed by the Free Software Foundation.
- */
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/i2c.h>
-#include <linux/i2c/pxa-i2c.h>
-#include <linux/mfd/88pm860x.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include <mach/irqs.h>
-#include <mach/hardware.h>
-#include <mach/mfp.h>
-#include <mach/mfp-pxa930.h>
-#include <mach/pxa95x.h>
-
-#include "generic.h"
-
-#define SAARB_NR_IRQS	(IRQ_BOARD_START + 40)
-
-static struct pm860x_touch_pdata saarb_touch = {
-	.gpadc_prebias	= 1,
-	.slot_cycle	= 1,
-	.tsi_prebias	= 6,
-	.pen_prebias	= 16,
-	.pen_prechg	= 2,
-	.res_x		= 300,
-};
-
-static struct pm860x_backlight_pdata saarb_backlight[] = {
-	{
-		.id	= PM8606_ID_BACKLIGHT,
-		.iset	= PM8606_WLED_CURRENT(24),
-		.flags	= PM8606_BACKLIGHT1,
-	},
-	{},
-};
-
-static struct pm860x_led_pdata saarb_led[] = {
-	{
-		.id	= PM8606_ID_LED,
-		.iset	= PM8606_LED_CURRENT(12),
-		.flags	= PM8606_LED1_RED,
-	}, {
-		.id	= PM8606_ID_LED,
-		.iset	= PM8606_LED_CURRENT(12),
-		.flags	= PM8606_LED1_GREEN,
-	}, {
-		.id	= PM8606_ID_LED,
-		.iset	= PM8606_LED_CURRENT(12),
-		.flags	= PM8606_LED1_BLUE,
-	}, {
-		.id	= PM8606_ID_LED,
-		.iset	= PM8606_LED_CURRENT(12),
-		.flags	= PM8606_LED2_RED,
-	}, {
-		.id	= PM8606_ID_LED,
-		.iset	= PM8606_LED_CURRENT(12),
-		.flags	= PM8606_LED2_GREEN,
-	}, {
-		.id	= PM8606_ID_LED,
-		.iset	= PM8606_LED_CURRENT(12),
-		.flags	= PM8606_LED2_BLUE,
-	},
-};
-
-static struct pm860x_platform_data saarb_pm8607_info = {
-	.touch		= &saarb_touch,
-	.backlight	= &saarb_backlight[0],
-	.led		= &saarb_led[0],
-	.companion_addr	= 0x10,
-	.irq_mode	= 0,
-	.irq_base	= IRQ_BOARD_START,
-
-	.i2c_port	= GI2C_PORT,
-};
-
-static struct i2c_board_info saarb_i2c_info[] = {
-	{
-		.type		= "88PM860x",
-		.addr		= 0x34,
-		.platform_data	= &saarb_pm8607_info,
-		.irq		= PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO83)),
-	},
-};
-
-static void __init saarb_init(void)
-{
-	pxa_set_ffuart_info(NULL);
-	pxa_set_i2c_info(NULL);
-	i2c_register_board_info(0, ARRAY_AND_SIZE(saarb_i2c_info));
-}
-
-MACHINE_START(SAARB, "PXA955 Handheld Platform (aka SAARB)")
-	.atag_offset    = 0x100,
-	.map_io         = pxa3xx_map_io,
-	.nr_irqs	= SAARB_NR_IRQS,
-	.init_irq       = pxa95x_init_irq,
-	.handle_irq	= pxa3xx_handle_irq,
-	.timer          = &pxa_timer,
-	.init_machine   = saarb_init,
-	.restart	= pxa_restart,
-MACHINE_END
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/sharpsl_pm.c b/ANDROID_3.4.5/arch/arm/mach-pxa/sharpsl_pm.c
deleted file mode 100644
index bdf4cb88..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/sharpsl_pm.c
+++ /dev/null
@@ -1,999 +0,0 @@
-/*
- * Battery and Power Management code for the Sharp SL-C7xx and SL-Cxx00
- * series of PDAs
- *
- * Copyright (c) 2004-2005 Richard Purdie
- *
- * Based on code written by Sharp for 2.4 kernels
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#undef DEBUG
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/apm-emulation.h>
-#include <linux/timer.h>
-#include <linux/delay.h>
-#include <linux/leds.h>
-#include <linux/suspend.h>
-#include <linux/gpio.h>
-#include <linux/io.h>
-
-#include <asm/mach-types.h>
-#include <mach/pm.h>
-#include <mach/pxa2xx-regs.h>
-#include <mach/regs-rtc.h>
-#include <mach/sharpsl_pm.h>
-
-/*
- * Constants
- */
-#define SHARPSL_CHARGE_ON_TIME_INTERVAL        (msecs_to_jiffies(1*60*1000))  /* 1 min */
-#define SHARPSL_CHARGE_FINISH_TIME             (msecs_to_jiffies(10*60*1000)) /* 10 min */
-#define SHARPSL_BATCHK_TIME                    (msecs_to_jiffies(15*1000))    /* 15 sec */
-#define SHARPSL_BATCHK_TIME_SUSPEND            (60*10)                        /* 10 min */
-
-#define SHARPSL_WAIT_CO_TIME                   15  /* 15 sec */
-#define SHARPSL_WAIT_DISCHARGE_ON              100 /* 100 msec */
-#define SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP   10  /* 10 msec */
-#define SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT   10  /* 10 msec */
-#define SHARPSL_CHECK_BATTERY_WAIT_TIME_ACIN   10  /* 10 msec */
-#define SHARPSL_CHARGE_WAIT_TIME               15  /* 15 msec */
-#define SHARPSL_CHARGE_CO_CHECK_TIME           5   /* 5 msec */
-#define SHARPSL_CHARGE_RETRY_CNT               1   /* eqv. 10 min */
-
-/*
- * Prototypes
- */
-#ifdef CONFIG_PM
-static int sharpsl_off_charge_battery(void);
-static int sharpsl_check_battery_voltage(void);
-static int sharpsl_fatal_check(void);
-#endif
-static int sharpsl_check_battery_temp(void);
-static int sharpsl_ac_check(void);
-static int sharpsl_average_value(int ad);
-static void sharpsl_average_clear(void);
-static void sharpsl_charge_toggle(struct work_struct *private_);
-static void sharpsl_battery_thread(struct work_struct *private_);
-
-
-/*
- * Variables
- */
-struct sharpsl_pm_status sharpsl_pm;
-static DECLARE_DELAYED_WORK(toggle_charger, sharpsl_charge_toggle);
-static DECLARE_DELAYED_WORK(sharpsl_bat, sharpsl_battery_thread);
-DEFINE_LED_TRIGGER(sharpsl_charge_led_trigger);
-
-
-
-struct battery_thresh sharpsl_battery_levels_acin[] = {
-	{ 213, 100},
-	{ 212,  98},
-	{ 211,  95},
-	{ 210,  93},
-	{ 209,  90},
-	{ 208,  88},
-	{ 207,  85},
-	{ 206,  83},
-	{ 205,  80},
-	{ 204,  78},
-	{ 203,  75},
-	{ 202,  73},
-	{ 201,  70},
-	{ 200,  68},
-	{ 199,  65},
-	{ 198,  63},
-	{ 197,  60},
-	{ 196,  58},
-	{ 195,  55},
-	{ 194,  53},
-	{ 193,  50},
-	{ 192,  48},
-	{ 192,  45},
-	{ 191,  43},
-	{ 191,  40},
-	{ 190,  38},
-	{ 190,  35},
-	{ 189,  33},
-	{ 188,  30},
-	{ 187,  28},
-	{ 186,  25},
-	{ 185,  23},
-	{ 184,  20},
-	{ 183,  18},
-	{ 182,  15},
-	{ 181,  13},
-	{ 180,  10},
-	{ 179,   8},
-	{ 178,   5},
-	{   0,   0},
-};
-
-struct battery_thresh sharpsl_battery_levels_noac[] = {
-	{ 213, 100},
-	{ 212,  98},
-	{ 211,  95},
-	{ 210,  93},
-	{ 209,  90},
-	{ 208,  88},
-	{ 207,  85},
-	{ 206,  83},
-	{ 205,  80},
-	{ 204,  78},
-	{ 203,  75},
-	{ 202,  73},
-	{ 201,  70},
-	{ 200,  68},
-	{ 199,  65},
-	{ 198,  63},
-	{ 197,  60},
-	{ 196,  58},
-	{ 195,  55},
-	{ 194,  53},
-	{ 193,  50},
-	{ 192,  48},
-	{ 191,  45},
-	{ 190,  43},
-	{ 189,  40},
-	{ 188,  38},
-	{ 187,  35},
-	{ 186,  33},
-	{ 185,  30},
-	{ 184,  28},
-	{ 183,  25},
-	{ 182,  23},
-	{ 181,  20},
-	{ 180,  18},
-	{ 179,  15},
-	{ 178,  13},
-	{ 177,  10},
-	{ 176,   8},
-	{ 175,   5},
-	{   0,   0},
-};
-
-/* MAX1111 Commands */
-#define MAXCTRL_PD0      (1u << 0)
-#define MAXCTRL_PD1      (1u << 1)
-#define MAXCTRL_SGL      (1u << 2)
-#define MAXCTRL_UNI      (1u << 3)
-#define MAXCTRL_SEL_SH   4
-#define MAXCTRL_STR      (1u << 7)
-
-extern int max1111_read_channel(int);
-/*
- * Read MAX1111 ADC
- */
-int sharpsl_pm_pxa_read_max1111(int channel)
-{
-	/* Ugly, better move this function into another module */
-	if (machine_is_tosa())
-	    return 0;
-
-	/* max1111 accepts channels from 0-3, however,
-	 * it is encoded from 0-7 here in the code.
-	 */
-	return max1111_read_channel(channel >> 1);
-}
-
-static int get_percentage(int voltage)
-{
-	int i = sharpsl_pm.machinfo->bat_levels - 1;
-	int bl_status = sharpsl_pm.machinfo->backlight_get_status ? sharpsl_pm.machinfo->backlight_get_status() : 0;
-	struct battery_thresh *thresh;
-
-	if (sharpsl_pm.charge_mode == CHRG_ON)
-		thresh = bl_status ? sharpsl_pm.machinfo->bat_levels_acin_bl : sharpsl_pm.machinfo->bat_levels_acin;
-	else
-		thresh = bl_status ? sharpsl_pm.machinfo->bat_levels_noac_bl : sharpsl_pm.machinfo->bat_levels_noac;
-
-	while (i > 0 && (voltage > thresh[i].voltage))
-		i--;
-
-	return thresh[i].percentage;
-}
-
-static int get_apm_status(int voltage)
-{
-	int low_thresh, high_thresh;
-
-	if (sharpsl_pm.charge_mode == CHRG_ON) {
-		high_thresh = sharpsl_pm.machinfo->status_high_acin;
-		low_thresh = sharpsl_pm.machinfo->status_low_acin;
-	} else {
-		high_thresh = sharpsl_pm.machinfo->status_high_noac;
-		low_thresh = sharpsl_pm.machinfo->status_low_noac;
-	}
-
-	if (voltage >= high_thresh)
-		return APM_BATTERY_STATUS_HIGH;
-	if (voltage >= low_thresh)
-		return APM_BATTERY_STATUS_LOW;
-	return APM_BATTERY_STATUS_CRITICAL;
-}
-
-void sharpsl_battery_kick(void)
-{
-	schedule_delayed_work(&sharpsl_bat, msecs_to_jiffies(125));
-}
-EXPORT_SYMBOL(sharpsl_battery_kick);
-
-
-static void sharpsl_battery_thread(struct work_struct *private_)
-{
-	int voltage, percent, apm_status, i;
-
-	if (!sharpsl_pm.machinfo)
-		return;
-
-	sharpsl_pm.battstat.ac_status = (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN) ? APM_AC_ONLINE : APM_AC_OFFLINE);
-
-	/* Corgi cannot confirm when battery fully charged so periodically kick! */
-	if (!sharpsl_pm.machinfo->batfull_irq && (sharpsl_pm.charge_mode == CHRG_ON)
-			&& time_after(jiffies, sharpsl_pm.charge_start_time +  SHARPSL_CHARGE_ON_TIME_INTERVAL))
-		schedule_delayed_work(&toggle_charger, 0);
-
-	for (i = 0; i < 5; i++) {
-		voltage = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT);
-		if (voltage > 0)
-			break;
-	}
-	if (voltage <= 0) {
-		voltage = sharpsl_pm.machinfo->bat_levels_noac[0].voltage;
-		dev_warn(sharpsl_pm.dev, "Warning: Cannot read main battery!\n");
-	}
-
-	voltage = sharpsl_average_value(voltage);
-	apm_status = get_apm_status(voltage);
-	percent = get_percentage(voltage);
-
-	/* At low battery voltages, the voltage has a tendency to start
-	   creeping back up so we try to avoid this here */
-	if ((sharpsl_pm.battstat.ac_status == APM_AC_ONLINE)
-	    || (apm_status == APM_BATTERY_STATUS_HIGH)
-	    || percent <= sharpsl_pm.battstat.mainbat_percent) {
-		sharpsl_pm.battstat.mainbat_voltage = voltage;
-		sharpsl_pm.battstat.mainbat_status = apm_status;
-		sharpsl_pm.battstat.mainbat_percent = percent;
-	}
-
-	dev_dbg(sharpsl_pm.dev, "Battery: voltage: %d, status: %d, percentage: %d, time: %ld\n", voltage,
-			sharpsl_pm.battstat.mainbat_status, sharpsl_pm.battstat.mainbat_percent, jiffies);
-
-	/* Suspend if critical battery level */
-	if ((sharpsl_pm.battstat.ac_status != APM_AC_ONLINE)
-	     && (sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL)
-	     && !(sharpsl_pm.flags & SHARPSL_APM_QUEUED)) {
-		sharpsl_pm.flags |= SHARPSL_APM_QUEUED;
-		dev_err(sharpsl_pm.dev, "Fatal Off\n");
-		apm_queue_event(APM_CRITICAL_SUSPEND);
-	}
-
-	schedule_delayed_work(&sharpsl_bat, SHARPSL_BATCHK_TIME);
-}
-
-void sharpsl_pm_led(int val)
-{
-	if (val == SHARPSL_LED_ERROR) {
-		dev_err(sharpsl_pm.dev, "Charging Error!\n");
-	} else if (val == SHARPSL_LED_ON) {
-		dev_dbg(sharpsl_pm.dev, "Charge LED On\n");
-		led_trigger_event(sharpsl_charge_led_trigger, LED_FULL);
-	} else {
-		dev_dbg(sharpsl_pm.dev, "Charge LED Off\n");
-		led_trigger_event(sharpsl_charge_led_trigger, LED_OFF);
-	}
-}
-
-static void sharpsl_charge_on(void)
-{
-	dev_dbg(sharpsl_pm.dev, "Turning Charger On\n");
-
-	sharpsl_pm.full_count = 0;
-	sharpsl_pm.charge_mode = CHRG_ON;
-	schedule_delayed_work(&toggle_charger, msecs_to_jiffies(250));
-	schedule_delayed_work(&sharpsl_bat, msecs_to_jiffies(500));
-}
-
-static void sharpsl_charge_off(void)
-{
-	dev_dbg(sharpsl_pm.dev, "Turning Charger Off\n");
-
-	sharpsl_pm.machinfo->charge(0);
-	sharpsl_pm_led(SHARPSL_LED_OFF);
-	sharpsl_pm.charge_mode = CHRG_OFF;
-
-	schedule_delayed_work(&sharpsl_bat, 0);
-}
-
-static void sharpsl_charge_error(void)
-{
-	sharpsl_pm_led(SHARPSL_LED_ERROR);
-	sharpsl_pm.machinfo->charge(0);
-	sharpsl_pm.charge_mode = CHRG_ERROR;
-}
-
-static void sharpsl_charge_toggle(struct work_struct *private_)
-{
-	dev_dbg(sharpsl_pm.dev, "Toggling Charger at time: %lx\n", jiffies);
-
-	if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN)) {
-		sharpsl_charge_off();
-		return;
-	} else if ((sharpsl_check_battery_temp() < 0) || (sharpsl_ac_check() < 0)) {
-		sharpsl_charge_error();
-		return;
-	}
-
-	sharpsl_pm_led(SHARPSL_LED_ON);
-	sharpsl_pm.machinfo->charge(0);
-	mdelay(SHARPSL_CHARGE_WAIT_TIME);
-	sharpsl_pm.machinfo->charge(1);
-
-	sharpsl_pm.charge_start_time = jiffies;
-}
-
-static void sharpsl_ac_timer(unsigned long data)
-{
-	int acin = sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN);
-
-	dev_dbg(sharpsl_pm.dev, "AC Status: %d\n", acin);
-
-	sharpsl_average_clear();
-	if (acin && (sharpsl_pm.charge_mode != CHRG_ON))
-		sharpsl_charge_on();
-	else if (sharpsl_pm.charge_mode == CHRG_ON)
-		sharpsl_charge_off();
-
-	schedule_delayed_work(&sharpsl_bat, 0);
-}
-
-
-static irqreturn_t sharpsl_ac_isr(int irq, void *dev_id)
-{
-	/* Delay the event slightly to debounce */
-	/* Must be a smaller delay than the chrg_full_isr below */
-	mod_timer(&sharpsl_pm.ac_timer, jiffies + msecs_to_jiffies(250));
-
-	return IRQ_HANDLED;
-}
-
-static void sharpsl_chrg_full_timer(unsigned long data)
-{
-	dev_dbg(sharpsl_pm.dev, "Charge Full at time: %lx\n", jiffies);
-
-	sharpsl_pm.full_count++;
-
-	if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN)) {
-		dev_dbg(sharpsl_pm.dev, "Charge Full: AC removed - stop charging!\n");
-		if (sharpsl_pm.charge_mode == CHRG_ON)
-			sharpsl_charge_off();
-	} else if (sharpsl_pm.full_count < 2) {
-		dev_dbg(sharpsl_pm.dev, "Charge Full: Count too low\n");
-		schedule_delayed_work(&toggle_charger, 0);
-	} else if (time_after(jiffies, sharpsl_pm.charge_start_time + SHARPSL_CHARGE_FINISH_TIME)) {
-		dev_dbg(sharpsl_pm.dev, "Charge Full: Interrupt generated too slowly - retry.\n");
-		schedule_delayed_work(&toggle_charger, 0);
-	} else {
-		sharpsl_charge_off();
-		sharpsl_pm.charge_mode = CHRG_DONE;
-		dev_dbg(sharpsl_pm.dev, "Charge Full: Charging Finished\n");
-	}
-}
-
-/* Charging Finished Interrupt (Not present on Corgi) */
-/* Can trigger at the same time as an AC status change so
-   delay until after that has been processed */
-static irqreturn_t sharpsl_chrg_full_isr(int irq, void *dev_id)
-{
-	if (sharpsl_pm.flags & SHARPSL_SUSPENDED)
-		return IRQ_HANDLED;
-
-	/* delay until after any ac interrupt */
-	mod_timer(&sharpsl_pm.chrg_full_timer, jiffies + msecs_to_jiffies(500));
-
-	return IRQ_HANDLED;
-}
-
-static irqreturn_t sharpsl_fatal_isr(int irq, void *dev_id)
-{
-	int is_fatal = 0;
-
-	if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_LOCK)) {
-		dev_err(sharpsl_pm.dev, "Battery now Unlocked! Suspending.\n");
-		is_fatal = 1;
-	}
-
-	if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_FATAL)) {
-		dev_err(sharpsl_pm.dev, "Fatal Batt Error! Suspending.\n");
-		is_fatal = 1;
-	}
-
-	if (!(sharpsl_pm.flags & SHARPSL_APM_QUEUED) && is_fatal) {
-		sharpsl_pm.flags |= SHARPSL_APM_QUEUED;
-		apm_queue_event(APM_CRITICAL_SUSPEND);
-	}
-
-	return IRQ_HANDLED;
-}
-
-/*
- * Maintain an average of the last 10 readings
- */
-#define SHARPSL_CNV_VALUE_NUM    10
-static int sharpsl_ad_index;
-
-static void sharpsl_average_clear(void)
-{
-	sharpsl_ad_index = 0;
-}
-
-static int sharpsl_average_value(int ad)
-{
-	int i, ad_val = 0;
-	static int sharpsl_ad[SHARPSL_CNV_VALUE_NUM+1];
-
-	if (sharpsl_pm.battstat.mainbat_status != APM_BATTERY_STATUS_HIGH) {
-		sharpsl_ad_index = 0;
-		return ad;
-	}
-
-	sharpsl_ad[sharpsl_ad_index] = ad;
-	sharpsl_ad_index++;
-	if (sharpsl_ad_index >= SHARPSL_CNV_VALUE_NUM) {
-		for (i = 0; i < (SHARPSL_CNV_VALUE_NUM-1); i++)
-			sharpsl_ad[i] = sharpsl_ad[i+1];
-		sharpsl_ad_index = SHARPSL_CNV_VALUE_NUM - 1;
-	}
-	for (i = 0; i < sharpsl_ad_index; i++)
-		ad_val += sharpsl_ad[i];
-
-	return ad_val / sharpsl_ad_index;
-}
-
-/*
- * Take an array of 5 integers, remove the maximum and minimum values
- * and return the average.
- */
-static int get_select_val(int *val)
-{
-	int i, j, k, temp, sum = 0;
-
-	/* Find MAX val */
-	temp = val[0];
-	j = 0;
-	for (i = 1; i < 5; i++) {
-		if (temp < val[i]) {
-			temp = val[i];
-			j = i;
-		}
-	}
-
-	/* Find MIN val */
-	temp = val[4];
-	k = 4;
-	for (i = 3; i >= 0; i--) {
-		if (temp > val[i]) {
-			temp = val[i];
-			k = i;
-		}
-	}
-
-	for (i = 0; i < 5; i++)
-		if (i != j && i != k)
-			sum += val[i];
-
-	dev_dbg(sharpsl_pm.dev, "Average: %d from values: %d, %d, %d, %d, %d\n", sum/3, val[0], val[1], val[2], val[3], val[4]);
-
-	return sum/3;
-}
-
-static int sharpsl_check_battery_temp(void)
-{
-	int val, i, buff[5];
-
-	/* Check battery temperature */
-	for (i = 0; i < 5; i++) {
-		mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP);
-		sharpsl_pm.machinfo->measure_temp(1);
-		mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP);
-		buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_TEMP);
-		sharpsl_pm.machinfo->measure_temp(0);
-	}
-
-	val = get_select_val(buff);
-
-	dev_dbg(sharpsl_pm.dev, "Temperature: %d\n", val);
-	if (val > sharpsl_pm.machinfo->charge_on_temp) {
-		printk(KERN_WARNING "Not charging: temperature out of limits.\n");
-		return -1;
-	}
-
-	return 0;
-}
-
-#ifdef CONFIG_PM
-static int sharpsl_check_battery_voltage(void)
-{
-	int val, i, buff[5];
-
-	/* disable charge, enable discharge */
-	sharpsl_pm.machinfo->charge(0);
-	sharpsl_pm.machinfo->discharge(1);
-	mdelay(SHARPSL_WAIT_DISCHARGE_ON);
-
-	if (sharpsl_pm.machinfo->discharge1)
-		sharpsl_pm.machinfo->discharge1(1);
-
-	/* Check battery voltage */
-	for (i = 0; i < 5; i++) {
-		buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT);
-		mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT);
-	}
-
-	if (sharpsl_pm.machinfo->discharge1)
-		sharpsl_pm.machinfo->discharge1(0);
-
-	sharpsl_pm.machinfo->discharge(0);
-
-	val = get_select_val(buff);
-	dev_dbg(sharpsl_pm.dev, "Battery Voltage: %d\n", val);
-
-	if (val < sharpsl_pm.machinfo->charge_on_volt)
-		return -1;
-
-	return 0;
-}
-#endif
-
-static int sharpsl_ac_check(void)
-{
-	int temp, i, buff[5];
-
-	for (i = 0; i < 5; i++) {
-		buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_ACIN_VOLT);
-		mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_ACIN);
-	}
-
-	temp = get_select_val(buff);
-	dev_dbg(sharpsl_pm.dev, "AC Voltage: %d\n", temp);
-
-	if ((temp > sharpsl_pm.machinfo->charge_acin_high) || (temp < sharpsl_pm.machinfo->charge_acin_low)) {
-		dev_err(sharpsl_pm.dev, "Error: AC check failed: voltage %d.\n", temp);
-		return -1;
-	}
-
-	return 0;
-}
-
-#ifdef CONFIG_PM
-static int sharpsl_pm_suspend(struct platform_device *pdev, pm_message_t state)
-{
-	sharpsl_pm.flags |= SHARPSL_SUSPENDED;
-	flush_delayed_work_sync(&toggle_charger);
-	flush_delayed_work_sync(&sharpsl_bat);
-
-	if (sharpsl_pm.charge_mode == CHRG_ON)
-		sharpsl_pm.flags |= SHARPSL_DO_OFFLINE_CHRG;
-	else
-		sharpsl_pm.flags &= ~SHARPSL_DO_OFFLINE_CHRG;
-
-	return 0;
-}
-
-static int sharpsl_pm_resume(struct platform_device *pdev)
-{
-	/* Clear the reset source indicators as they break the bootloader upon reboot */
-	RCSR = 0x0f;
-	sharpsl_average_clear();
-	sharpsl_pm.flags &= ~SHARPSL_APM_QUEUED;
-	sharpsl_pm.flags &= ~SHARPSL_SUSPENDED;
-
-	return 0;
-}
-
-static void corgi_goto_sleep(unsigned long alarm_time, unsigned int alarm_enable, suspend_state_t state)
-{
-	dev_dbg(sharpsl_pm.dev, "Time is: %08x\n", RCNR);
-
-	dev_dbg(sharpsl_pm.dev, "Offline Charge Activate = %d\n", sharpsl_pm.flags & SHARPSL_DO_OFFLINE_CHRG);
-	/* not charging and AC-IN! */
-
-	if ((sharpsl_pm.flags & SHARPSL_DO_OFFLINE_CHRG) && (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN))) {
-		dev_dbg(sharpsl_pm.dev, "Activating Offline Charger...\n");
-		sharpsl_pm.charge_mode = CHRG_OFF;
-		sharpsl_pm.flags &= ~SHARPSL_DO_OFFLINE_CHRG;
-		sharpsl_off_charge_battery();
-	}
-
-	sharpsl_pm.machinfo->presuspend();
-
-	PEDR = 0xffffffff; /* clear it */
-
-	sharpsl_pm.flags &= ~SHARPSL_ALARM_ACTIVE;
-	if ((sharpsl_pm.charge_mode == CHRG_ON) && ((alarm_enable && ((alarm_time - RCNR) > (SHARPSL_BATCHK_TIME_SUSPEND + 30))) || !alarm_enable)) {
-		RTSR &= RTSR_ALE;
-		RTAR = RCNR + SHARPSL_BATCHK_TIME_SUSPEND;
-		dev_dbg(sharpsl_pm.dev, "Charging alarm at: %08x\n", RTAR);
-		sharpsl_pm.flags |= SHARPSL_ALARM_ACTIVE;
-	} else if (alarm_enable) {
-		RTSR &= RTSR_ALE;
-		RTAR = alarm_time;
-		dev_dbg(sharpsl_pm.dev, "User alarm at: %08x\n", RTAR);
-	} else {
-		dev_dbg(sharpsl_pm.dev, "No alarms set.\n");
-	}
-
-	pxa_pm_enter(state);
-
-	sharpsl_pm.machinfo->postsuspend();
-
-	dev_dbg(sharpsl_pm.dev, "Corgi woken up from suspend: %08x\n", PEDR);
-}
-
-static int corgi_enter_suspend(unsigned long alarm_time, unsigned int alarm_enable, suspend_state_t state)
-{
-	if (!sharpsl_pm.machinfo->should_wakeup(!(sharpsl_pm.flags & SHARPSL_ALARM_ACTIVE) && alarm_enable)) {
-		if (!(sharpsl_pm.flags & SHARPSL_ALARM_ACTIVE)) {
-			dev_dbg(sharpsl_pm.dev, "No user triggered wakeup events and not charging. Strange. Suspend.\n");
-			corgi_goto_sleep(alarm_time, alarm_enable, state);
-			return 1;
-		}
-		if (sharpsl_off_charge_battery()) {
-			dev_dbg(sharpsl_pm.dev, "Charging. Suspend...\n");
-			corgi_goto_sleep(alarm_time, alarm_enable, state);
-			return 1;
-		}
-		dev_dbg(sharpsl_pm.dev, "User triggered wakeup in offline charger.\n");
-	}
-
-	if ((!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_LOCK)) ||
-	    (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_FATAL)))	{
-		dev_err(sharpsl_pm.dev, "Fatal condition. Suspend.\n");
-		corgi_goto_sleep(alarm_time, alarm_enable, state);
-		return 1;
-	}
-
-	return 0;
-}
-
-static int corgi_pxa_pm_enter(suspend_state_t state)
-{
-	unsigned long alarm_time = RTAR;
-	unsigned int alarm_status = ((RTSR & RTSR_ALE) != 0);
-
-	dev_dbg(sharpsl_pm.dev, "SharpSL suspending for first time.\n");
-
-	corgi_goto_sleep(alarm_time, alarm_status, state);
-
-	while (corgi_enter_suspend(alarm_time, alarm_status, state))
-		{}
-
-	if (sharpsl_pm.machinfo->earlyresume)
-		sharpsl_pm.machinfo->earlyresume();
-
-	dev_dbg(sharpsl_pm.dev, "SharpSL resuming...\n");
-
-	return 0;
-}
-
-/*
- * Check for fatal battery errors
- * Fatal returns -1
- */
-static int sharpsl_fatal_check(void)
-{
-	int buff[5], temp, i, acin;
-
-	dev_dbg(sharpsl_pm.dev, "sharpsl_fatal_check entered\n");
-
-	/* Check AC-Adapter */
-	acin = sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN);
-
-	if (acin && (sharpsl_pm.charge_mode == CHRG_ON)) {
-		sharpsl_pm.machinfo->charge(0);
-		udelay(100);
-		sharpsl_pm.machinfo->discharge(1);	/* enable discharge */
-		mdelay(SHARPSL_WAIT_DISCHARGE_ON);
-	}
-
-	if (sharpsl_pm.machinfo->discharge1)
-		sharpsl_pm.machinfo->discharge1(1);
-
-	/* Check battery : check inserting battery ? */
-	for (i = 0; i < 5; i++) {
-		buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT);
-		mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT);
-	}
-
-	if (sharpsl_pm.machinfo->discharge1)
-		sharpsl_pm.machinfo->discharge1(0);
-
-	if (acin && (sharpsl_pm.charge_mode == CHRG_ON)) {
-		udelay(100);
-		sharpsl_pm.machinfo->charge(1);
-		sharpsl_pm.machinfo->discharge(0);
-	}
-
-	temp = get_select_val(buff);
-	dev_dbg(sharpsl_pm.dev, "sharpsl_fatal_check: acin: %d, discharge voltage: %d, no discharge: %ld\n", acin, temp, sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT));
-
-	if ((acin && (temp < sharpsl_pm.machinfo->fatal_acin_volt)) ||
-			(!acin && (temp < sharpsl_pm.machinfo->fatal_noacin_volt)))
-		return -1;
-	return 0;
-}
-
-static int sharpsl_off_charge_error(void)
-{
-	dev_err(sharpsl_pm.dev, "Offline Charger: Error occurred.\n");
-	sharpsl_pm.machinfo->charge(0);
-	sharpsl_pm_led(SHARPSL_LED_ERROR);
-	sharpsl_pm.charge_mode = CHRG_ERROR;
-	return 1;
-}
-
-/*
- * Charging Control while suspended
- * Return 1 - go straight to sleep
- * Return 0 - sleep or wakeup depending on other factors
- */
-static int sharpsl_off_charge_battery(void)
-{
-	int time;
-
-	dev_dbg(sharpsl_pm.dev, "Charge Mode: %d\n", sharpsl_pm.charge_mode);
-
-	if (sharpsl_pm.charge_mode == CHRG_OFF) {
-		dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 1\n");
-
-		/* AC Check */
-		if ((sharpsl_ac_check() < 0) || (sharpsl_check_battery_temp() < 0))
-			return sharpsl_off_charge_error();
-
-		/* Start Charging */
-		sharpsl_pm_led(SHARPSL_LED_ON);
-		sharpsl_pm.machinfo->charge(0);
-		mdelay(SHARPSL_CHARGE_WAIT_TIME);
-		sharpsl_pm.machinfo->charge(1);
-
-		sharpsl_pm.charge_mode = CHRG_ON;
-		sharpsl_pm.full_count = 0;
-
-		return 1;
-	} else if (sharpsl_pm.charge_mode != CHRG_ON) {
-		return 1;
-	}
-
-	if (sharpsl_pm.full_count == 0) {
-		int time;
-
-		dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 2\n");
-
-		if ((sharpsl_check_battery_temp() < 0) || (sharpsl_check_battery_voltage() < 0))
-			return sharpsl_off_charge_error();
-
-		sharpsl_pm.machinfo->charge(0);
-		mdelay(SHARPSL_CHARGE_WAIT_TIME);
-		sharpsl_pm.machinfo->charge(1);
-		sharpsl_pm.charge_mode = CHRG_ON;
-
-		mdelay(SHARPSL_CHARGE_CO_CHECK_TIME);
-
-		time = RCNR;
-		while (1) {
-			/* Check if any wakeup event had occurred */
-			if (sharpsl_pm.machinfo->charger_wakeup() != 0)
-				return 0;
-			/* Check for timeout */
-			if ((RCNR - time) > SHARPSL_WAIT_CO_TIME)
-				return 1;
-			if (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_CHRGFULL)) {
-				dev_dbg(sharpsl_pm.dev, "Offline Charger: Charge full occurred. Retrying to check\n");
-				sharpsl_pm.full_count++;
-				sharpsl_pm.machinfo->charge(0);
-				mdelay(SHARPSL_CHARGE_WAIT_TIME);
-				sharpsl_pm.machinfo->charge(1);
-				return 1;
-			}
-		}
-	}
-
-	dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 3\n");
-
-	mdelay(SHARPSL_CHARGE_CO_CHECK_TIME);
-
-	time = RCNR;
-	while (1) {
-		/* Check if any wakeup event had occurred */
-		if (sharpsl_pm.machinfo->charger_wakeup())
-			return 0;
-		/* Check for timeout */
-		if ((RCNR-time) > SHARPSL_WAIT_CO_TIME) {
-			if (sharpsl_pm.full_count > SHARPSL_CHARGE_RETRY_CNT) {
-				dev_dbg(sharpsl_pm.dev, "Offline Charger: Not charged sufficiently. Retrying.\n");
-				sharpsl_pm.full_count = 0;
-			}
-			sharpsl_pm.full_count++;
-			return 1;
-		}
-		if (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_CHRGFULL)) {
-			dev_dbg(sharpsl_pm.dev, "Offline Charger: Charging complete.\n");
-			sharpsl_pm_led(SHARPSL_LED_OFF);
-			sharpsl_pm.machinfo->charge(0);
-			sharpsl_pm.charge_mode = CHRG_DONE;
-			return 1;
-		}
-	}
-}
-#else
-#define sharpsl_pm_suspend	NULL
-#define sharpsl_pm_resume	NULL
-#endif
-
-static ssize_t battery_percentage_show(struct device *dev, struct device_attribute *attr, char *buf)
-{
-	return sprintf(buf, "%d\n", sharpsl_pm.battstat.mainbat_percent);
-}
-
-static ssize_t battery_voltage_show(struct device *dev, struct device_attribute *attr, char *buf)
-{
-	return sprintf(buf, "%d\n", sharpsl_pm.battstat.mainbat_voltage);
-}
-
-static DEVICE_ATTR(battery_percentage, 0444, battery_percentage_show, NULL);
-static DEVICE_ATTR(battery_voltage, 0444, battery_voltage_show, NULL);
-
-extern void (*apm_get_power_status)(struct apm_power_info *);
-
-static void sharpsl_apm_get_power_status(struct apm_power_info *info)
-{
-	info->ac_line_status = sharpsl_pm.battstat.ac_status;
-
-	if (sharpsl_pm.charge_mode == CHRG_ON)
-		info->battery_status = APM_BATTERY_STATUS_CHARGING;
-	else
-		info->battery_status = sharpsl_pm.battstat.mainbat_status;
-
-	info->battery_flag = (1 << info->battery_status);
-	info->battery_life = sharpsl_pm.battstat.mainbat_percent;
-}
-
-#ifdef CONFIG_PM
-static const struct platform_suspend_ops sharpsl_pm_ops = {
-	.prepare	= pxa_pm_prepare,
-	.finish		= pxa_pm_finish,
-	.enter		= corgi_pxa_pm_enter,
-	.valid		= suspend_valid_only_mem,
-};
-#endif
-
-static int __devinit sharpsl_pm_probe(struct platform_device *pdev)
-{
-	int ret;
-
-	if (!pdev->dev.platform_data)
-		return -EINVAL;
-
-	sharpsl_pm.dev = &pdev->dev;
-	sharpsl_pm.machinfo = pdev->dev.platform_data;
-	sharpsl_pm.charge_mode = CHRG_OFF;
-	sharpsl_pm.flags = 0;
-
-	init_timer(&sharpsl_pm.ac_timer);
-	sharpsl_pm.ac_timer.function = sharpsl_ac_timer;
-
-	init_timer(&sharpsl_pm.chrg_full_timer);
-	sharpsl_pm.chrg_full_timer.function = sharpsl_chrg_full_timer;
-
-	led_trigger_register_simple("sharpsl-charge", &sharpsl_charge_led_trigger);
-
-	sharpsl_pm.machinfo->init();
-
-	gpio_request(sharpsl_pm.machinfo->gpio_acin, "AC IN");
-	gpio_direction_input(sharpsl_pm.machinfo->gpio_acin);
-	gpio_request(sharpsl_pm.machinfo->gpio_batfull, "Battery Full");
-	gpio_direction_input(sharpsl_pm.machinfo->gpio_batfull);
-	gpio_request(sharpsl_pm.machinfo->gpio_batlock, "Battery Lock");
-	gpio_direction_input(sharpsl_pm.machinfo->gpio_batlock);
-
-	/* Register interrupt handlers */
-	if (request_irq(PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_acin), sharpsl_ac_isr, IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, "AC Input Detect", sharpsl_ac_isr)) {
-		dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_acin));
-	}
-
-	if (request_irq(PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_batlock), sharpsl_fatal_isr, IRQF_DISABLED | IRQF_TRIGGER_FALLING, "Battery Cover", sharpsl_fatal_isr)) {
-		dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_batlock));
-	}
-
-	if (sharpsl_pm.machinfo->gpio_fatal) {
-		if (request_irq(PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_fatal), sharpsl_fatal_isr, IRQF_DISABLED | IRQF_TRIGGER_FALLING, "Fatal Battery", sharpsl_fatal_isr)) {
-			dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_fatal));
-		}
-	}
-
-	if (sharpsl_pm.machinfo->batfull_irq) {
-		/* Register interrupt handler. */
-		if (request_irq(PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr, IRQF_DISABLED | IRQF_TRIGGER_RISING, "CO", sharpsl_chrg_full_isr)) {
-			dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_batfull));
-		}
-	}
-
-	ret = device_create_file(&pdev->dev, &dev_attr_battery_percentage);
-	ret |= device_create_file(&pdev->dev, &dev_attr_battery_voltage);
-	if (ret != 0)
-		dev_warn(&pdev->dev, "Failed to register attributes (%d)\n", ret);
-
-	apm_get_power_status = sharpsl_apm_get_power_status;
-
-#ifdef CONFIG_PM
-	suspend_set_ops(&sharpsl_pm_ops);
-#endif
-
-	mod_timer(&sharpsl_pm.ac_timer, jiffies + msecs_to_jiffies(250));
-
-	return 0;
-}
-
-static int sharpsl_pm_remove(struct platform_device *pdev)
-{
-	suspend_set_ops(NULL);
-
-	device_remove_file(&pdev->dev, &dev_attr_battery_percentage);
-	device_remove_file(&pdev->dev, &dev_attr_battery_voltage);
-
-	led_trigger_unregister_simple(sharpsl_charge_led_trigger);
-
-	free_irq(PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_acin), sharpsl_ac_isr);
-	free_irq(PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_batlock), sharpsl_fatal_isr);
-
-	if (sharpsl_pm.machinfo->gpio_fatal)
-		free_irq(PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_fatal), sharpsl_fatal_isr);
-
-	if (sharpsl_pm.machinfo->batfull_irq)
-		free_irq(PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr);
-
-	gpio_free(sharpsl_pm.machinfo->gpio_batlock);
-	gpio_free(sharpsl_pm.machinfo->gpio_batfull);
-	gpio_free(sharpsl_pm.machinfo->gpio_acin);
-
-	if (sharpsl_pm.machinfo->exit)
-		sharpsl_pm.machinfo->exit();
-
-	del_timer_sync(&sharpsl_pm.chrg_full_timer);
-	del_timer_sync(&sharpsl_pm.ac_timer);
-
-	return 0;
-}
-
-static struct platform_driver sharpsl_pm_driver = {
-	.probe		= sharpsl_pm_probe,
-	.remove		= sharpsl_pm_remove,
-	.suspend	= sharpsl_pm_suspend,
-	.resume		= sharpsl_pm_resume,
-	.driver		= {
-		.name		= "sharpsl-pm",
-	},
-};
-
-static int __devinit sharpsl_pm_init(void)
-{
-	return platform_driver_register(&sharpsl_pm_driver);
-}
-
-static void sharpsl_pm_exit(void)
-{
-	platform_driver_unregister(&sharpsl_pm_driver);
-}
-
-late_initcall(sharpsl_pm_init);
-module_exit(sharpsl_pm_exit);
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/sleep.S b/ANDROID_3.4.5/arch/arm/mach-pxa/sleep.S
deleted file mode 100644
index 1e544be9..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/sleep.S
+++ /dev/null
@@ -1,171 +0,0 @@
-/*
- * Low-level PXA250/210 sleep/wakeUp support
- *
- * Initial SA1110 code:
- * Copyright (c) 2001 Cliff Brake <cbrake@accelent.com>
- *
- * Adapted for PXA by Nicolas Pitre:
- * Copyright (c) 2002 Monta Vista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License.
- */
-
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-#include <mach/hardware.h>
-#include <mach/smemc.h>
-#include <mach/pxa2xx-regs.h>
-
-#define MDREFR_KDIV	0x200a4000	// all banks
-#define CCCR_SLEEP	0x00000107	// L=7 2N=2 A=0 PPDIS=0 CPDIS=0
-
-		.text
-
-#ifdef CONFIG_PXA3xx
-/*
- * pxa3xx_finish_suspend() - forces CPU into sleep state (S2D3C4)
- */
-ENTRY(pxa3xx_finish_suspend)
-	mov	r0, #0x06		@ S2D3C4 mode
-	mcr	p14, 0, r0, c7, c0, 0	@ enter sleep
-
-20:	b	20b			@ waiting for sleep
-#endif /* CONFIG_PXA3xx */
-
-#ifdef CONFIG_PXA27x
-/*
- * pxa27x_finish_suspend()
- *
- * Forces CPU into sleep state.
- *
- * r0 = value for PWRMODE M field for desired sleep state
- */
-ENTRY(pxa27x_finish_suspend)
-	@ Put the processor to sleep
-	@ (also workaround for sighting 28071)
-
-	@ prepare value for sleep mode
-	mov	r1, r0				@ sleep mode
-
-	@ prepare pointer to physical address 0 (virtual mapping in generic.c)
-	mov	r2, #UNCACHED_PHYS_0
-
-	@ prepare SDRAM refresh settings
-	ldr	r4, =MDREFR
-	ldr	r5, [r4]
-
-	@ enable SDRAM self-refresh mode
-	orr	r5, r5, #MDREFR_SLFRSH
-
-	@ set SDCLKx divide-by-2 bits (this is part of a workaround for Errata 50)
-	ldr	r6, =MDREFR_KDIV
-	orr	r5, r5, r6
-
-	@ Intel PXA270 Specification Update notes problems sleeping
-	@ with core operating above 91 MHz
-	@ (see Errata 50, ...processor does not exit from sleep...)
-
-	ldr	r6, =CCCR
-	ldr	r8, [r6]		@ keep original value for resume
-
-	ldr	r7, =CCCR_SLEEP		@ prepare CCCR sleep value
-	mov	r0, #0x2		@ prepare value for CLKCFG
-
-	@ align execution to a cache line
-	b	pxa_cpu_do_suspend
-#endif
-
-#ifdef CONFIG_PXA25x
-/*
- * pxa25x_finish_suspend()
- *
- * Forces CPU into sleep state.
- *
- * r0 = value for PWRMODE M field for desired sleep state
- */
-
-ENTRY(pxa25x_finish_suspend)
-	@ prepare value for sleep mode
-	mov	r1, r0				@ sleep mode
-
-	@ prepare pointer to physical address 0 (virtual mapping in generic.c)
-	mov	r2, #UNCACHED_PHYS_0
-
-	@ prepare SDRAM refresh settings
-	ldr	r4, =MDREFR
-	ldr	r5, [r4]
-
-	@ enable SDRAM self-refresh mode
-	orr	r5, r5, #MDREFR_SLFRSH
-
-	@ Intel PXA255 Specification Update notes problems
-	@ about suspending with PXBus operating above 133MHz
-	@ (see Errata 31, GPIO output signals, ... unpredictable in sleep
-	@
-	@ We keep the change-down close to the actual suspend on SDRAM
-	@ as possible to eliminate messing about with the refresh clock
-	@ as the system will restore with the original speed settings
-	@
-	@ Ben Dooks, 13-Sep-2004
-
-	ldr	r6, =CCCR
-	ldr	r8, [r6]		@ keep original value for resume
-
-	@ ensure x1 for run and turbo mode with memory clock
-	bic	r7, r8, #CCCR_M_MASK | CCCR_N_MASK
-	orr	r7, r7, #(1<<5) | (2<<7)
-
-	@ check that the memory frequency is within limits
-	and	r14, r7, #CCCR_L_MASK
-	teq	r14, #1
-	bicne	r7, r7, #CCCR_L_MASK
-	orrne	r7, r7, #1			@@ 99.53MHz
-
-	@ get ready for the change
-
-	@ note, turbo is not preserved over sleep so there is no
-	@ point in preserving it here. we save it on the stack with the
-	@ other CP registers instead.
-	mov	r0, #0
-	mcr	p14, 0, r0, c6, c0, 0
-	orr	r0, r0, #2			@ initiate change bit
-	b	pxa_cpu_do_suspend
-#endif
-
-	.ltorg
-	.align	5
-pxa_cpu_do_suspend:
-
-	@ All needed values are now in registers.
-	@ These last instructions should be in cache
-
-	@ initiate the frequency change...
-	str	r7, [r6]
-	mcr	p14, 0, r0, c6, c0, 0
-
-	@ restore the original cpu speed value for resume
-	str	r8, [r6]
-
-	@ need 6 13-MHz cycles before changing PWRMODE
-	@ just set frequency to 91-MHz... 6*91/13 = 42
-
-	mov	r0, #42
-10:	subs	r0, r0, #1
-	bne	10b
-
-	@ Do not reorder...
-	@ Intel PXA270 Specification Update notes problems performing
-	@ external accesses after SDRAM is put in self-refresh mode
-	@ (see Errata 39 ...hangs when entering self-refresh mode)
-
-	@ force address lines low by reading at physical address 0
-	ldr	r3, [r2]
-
-	@ put SDRAM into self-refresh
-	str	r5, [r4]
-
-	@ enter sleep mode
-	mcr	p14, 0, r1, c7, c0, 0		@ PWRMODE
-
-20:	b	20b				@ loop waiting for sleep
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/smemc.c b/ANDROID_3.4.5/arch/arm/mach-pxa/smemc.c
deleted file mode 100644
index 79923058..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/smemc.c
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- * Static Memory Controller
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/syscore_ops.h>
-
-#include <mach/hardware.h>
-#include <mach/smemc.h>
-
-#ifdef CONFIG_PM
-static unsigned long msc[2];
-static unsigned long sxcnfg, memclkcfg;
-static unsigned long csadrcfg[4];
-
-static int pxa3xx_smemc_suspend(void)
-{
-	msc[0] = __raw_readl(MSC0);
-	msc[1] = __raw_readl(MSC1);
-	sxcnfg = __raw_readl(SXCNFG);
-	memclkcfg = __raw_readl(MEMCLKCFG);
-	csadrcfg[0] = __raw_readl(CSADRCFG0);
-	csadrcfg[1] = __raw_readl(CSADRCFG1);
-	csadrcfg[2] = __raw_readl(CSADRCFG2);
-	csadrcfg[3] = __raw_readl(CSADRCFG3);
-
-	return 0;
-}
-
-static void pxa3xx_smemc_resume(void)
-{
-	__raw_writel(msc[0], MSC0);
-	__raw_writel(msc[1], MSC1);
-	__raw_writel(sxcnfg, SXCNFG);
-	__raw_writel(memclkcfg, MEMCLKCFG);
-	__raw_writel(csadrcfg[0], CSADRCFG0);
-	__raw_writel(csadrcfg[1], CSADRCFG1);
-	__raw_writel(csadrcfg[2], CSADRCFG2);
-	__raw_writel(csadrcfg[3], CSADRCFG3);
-}
-
-static struct syscore_ops smemc_syscore_ops = {
-	.suspend	= pxa3xx_smemc_suspend,
-	.resume		= pxa3xx_smemc_resume,
-};
-
-static int __init smemc_init(void)
-{
-	if (cpu_is_pxa3xx())
-		register_syscore_ops(&smemc_syscore_ops);
-
-	return 0;
-}
-subsys_initcall(smemc_init);
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/spitz.c b/ANDROID_3.4.5/arch/arm/mach-pxa/spitz.c
deleted file mode 100644
index df2ab0fb..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/spitz.c
+++ /dev/null
@@ -1,1022 +0,0 @@
-/*
- * Support for Sharp SL-Cxx00 Series of PDAs
- * Models: SL-C3000 (Spitz), SL-C1000 (Akita) and SL-C3100 (Borzoi)
- *
- * Copyright (c) 2005 Richard Purdie
- *
- * Based on Sharp's 2.4 kernel patches/lubbock.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/gpio_keys.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <linux/i2c.h>
-#include <linux/i2c/pxa-i2c.h>
-#include <linux/i2c/pca953x.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/ads7846.h>
-#include <linux/spi/corgi_lcd.h>
-#include <linux/spi/pxa2xx_spi.h>
-#include <linux/mtd/sharpsl.h>
-#include <linux/mtd/physmap.h>
-#include <linux/input/matrix_keypad.h>
-#include <linux/regulator/machine.h>
-#include <linux/io.h>
-#include <linux/module.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/sharpsl_param.h>
-#include <asm/hardware/scoop.h>
-
-#include <mach/pxa27x.h>
-#include <mach/pxa27x-udc.h>
-#include <mach/reset.h>
-#include <mach/irda.h>
-#include <mach/mmc.h>
-#include <mach/ohci.h>
-#include <mach/pxafb.h>
-#include <mach/spitz.h>
-#include <mach/sharpsl_pm.h>
-#include <mach/smemc.h>
-
-#include "generic.h"
-#include "devices.h"
-
-/******************************************************************************
- * Pin configuration
- ******************************************************************************/
-static unsigned long spitz_pin_config[] __initdata = {
-	/* Chip Selects */
-	GPIO78_nCS_2,	/* SCOOP #2 */
-	GPIO79_nCS_3,	/* NAND */
-	GPIO80_nCS_4,	/* SCOOP #1 */
-
-	/* LCD - 16bpp Active TFT */
-	GPIOxx_LCD_TFT_16BPP,
-
-	/* PC Card */
-	GPIO48_nPOE,
-	GPIO49_nPWE,
-	GPIO50_nPIOR,
-	GPIO51_nPIOW,
-	GPIO85_nPCE_1,
-	GPIO54_nPCE_2,
-	GPIO55_nPREG,
-	GPIO56_nPWAIT,
-	GPIO57_nIOIS16,
-	GPIO104_PSKTSEL,
-
-	/* I2S */
-	GPIO28_I2S_BITCLK_OUT,
-	GPIO29_I2S_SDATA_IN,
-	GPIO30_I2S_SDATA_OUT,
-	GPIO31_I2S_SYNC,
-
-	/* MMC */
-	GPIO32_MMC_CLK,
-	GPIO112_MMC_CMD,
-	GPIO92_MMC_DAT_0,
-	GPIO109_MMC_DAT_1,
-	GPIO110_MMC_DAT_2,
-	GPIO111_MMC_DAT_3,
-
-	/* GPIOs */
-	GPIO9_GPIO,	/* SPITZ_GPIO_nSD_DETECT */
-	GPIO16_GPIO,	/* SPITZ_GPIO_SYNC */
-	GPIO81_GPIO,	/* SPITZ_GPIO_nSD_WP */
-	GPIO41_GPIO,	/* SPITZ_GPIO_USB_CONNECT */
-	GPIO37_GPIO,	/* SPITZ_GPIO_USB_HOST */
-	GPIO35_GPIO,	/* SPITZ_GPIO_USB_DEVICE */
-	GPIO22_GPIO,	/* SPITZ_GPIO_HSYNC */
-	GPIO94_GPIO,	/* SPITZ_GPIO_CF_CD */
-	GPIO105_GPIO,	/* SPITZ_GPIO_CF_IRQ */
-	GPIO106_GPIO,	/* SPITZ_GPIO_CF2_IRQ */
-
-	/* GPIO matrix keypad */
-	GPIO88_GPIO,	/* column 0 */
-	GPIO23_GPIO,	/* column 1 */
-	GPIO24_GPIO,	/* column 2 */
-	GPIO25_GPIO,	/* column 3 */
-	GPIO26_GPIO,	/* column 4 */
-	GPIO27_GPIO,	/* column 5 */
-	GPIO52_GPIO,	/* column 6 */
-	GPIO103_GPIO,	/* column 7 */
-	GPIO107_GPIO,	/* column 8 */
-	GPIO108_GPIO,	/* column 9 */
-	GPIO114_GPIO,	/* column 10 */
-	GPIO12_GPIO,	/* row 0 */
-	GPIO17_GPIO,	/* row 1 */
-	GPIO91_GPIO,	/* row 2 */
-	GPIO34_GPIO,	/* row 3 */
-	GPIO36_GPIO,	/* row 4 */
-	GPIO38_GPIO,	/* row 5 */
-	GPIO39_GPIO,	/* row 6 */
-
-	/* I2C */
-	GPIO117_I2C_SCL,
-	GPIO118_I2C_SDA,
-
-	GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,	/* SPITZ_GPIO_KEY_INT */
-	GPIO1_GPIO | WAKEUP_ON_EDGE_FALL,	/* SPITZ_GPIO_RESET */
-};
-
-
-/******************************************************************************
- * Scoop GPIO expander
- ******************************************************************************/
-#if defined(CONFIG_SHARP_SCOOP) || defined(CONFIG_SHARP_SCOOP_MODULE)
-/* SCOOP Device #1 */
-static struct resource spitz_scoop_1_resources[] = {
-	[0] = {
-		.start		= 0x10800000,
-		.end		= 0x10800fff,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct scoop_config spitz_scoop_1_setup = {
-	.io_dir		= SPITZ_SCP_IO_DIR,
-	.io_out		= SPITZ_SCP_IO_OUT,
-	.suspend_clr	= SPITZ_SCP_SUS_CLR,
-	.suspend_set	= SPITZ_SCP_SUS_SET,
-	.gpio_base	= SPITZ_SCP_GPIO_BASE,
-};
-
-struct platform_device spitz_scoop_1_device = {
-	.name		= "sharp-scoop",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &spitz_scoop_1_setup,
-	},
-	.num_resources	= ARRAY_SIZE(spitz_scoop_1_resources),
-	.resource	= spitz_scoop_1_resources,
-};
-
-/* SCOOP Device #2 */
-static struct resource spitz_scoop_2_resources[] = {
-	[0] = {
-		.start		= 0x08800040,
-		.end		= 0x08800fff,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct scoop_config spitz_scoop_2_setup = {
-	.io_dir		= SPITZ_SCP2_IO_DIR,
-	.io_out		= SPITZ_SCP2_IO_OUT,
-	.suspend_clr	= SPITZ_SCP2_SUS_CLR,
-	.suspend_set	= SPITZ_SCP2_SUS_SET,
-	.gpio_base	= SPITZ_SCP2_GPIO_BASE,
-};
-
-struct platform_device spitz_scoop_2_device = {
-	.name		= "sharp-scoop",
-	.id		= 1,
-	.dev		= {
-		.platform_data	= &spitz_scoop_2_setup,
-	},
-	.num_resources	= ARRAY_SIZE(spitz_scoop_2_resources),
-	.resource	= spitz_scoop_2_resources,
-};
-
-static void __init spitz_scoop_init(void)
-{
-	platform_device_register(&spitz_scoop_1_device);
-
-	/* Akita doesn't have the second SCOOP chip */
-	if (!machine_is_akita())
-		platform_device_register(&spitz_scoop_2_device);
-}
-
-/* Power control is shared with between one of the CF slots and SD */
-static void spitz_card_pwr_ctrl(uint8_t enable, uint8_t new_cpr)
-{
-	unsigned short cpr;
-	unsigned long flags;
-
-	if (new_cpr & 0x7) {
-		gpio_set_value(SPITZ_GPIO_CF_POWER, 1);
-		mdelay(5);
-	}
-
-	local_irq_save(flags);
-
-	cpr = read_scoop_reg(&spitz_scoop_1_device.dev, SCOOP_CPR);
-
-	if (enable & new_cpr)
-		cpr |= new_cpr;
-	else
-		cpr &= ~enable;
-
-	write_scoop_reg(&spitz_scoop_1_device.dev, SCOOP_CPR, cpr);
-
-	local_irq_restore(flags);
-
-	if (!(cpr & 0x7)) {
-		mdelay(1);
-		gpio_set_value(SPITZ_GPIO_CF_POWER, 0);
-	}
-}
-
-#else
-static inline void spitz_scoop_init(void) {}
-static inline void spitz_card_pwr_ctrl(uint8_t enable, uint8_t new_cpr) {}
-#endif
-
-/******************************************************************************
- * PCMCIA
- ******************************************************************************/
-#if defined(CONFIG_PCMCIA_PXA2XX) || defined(CONFIG_PCMCIA_PXA2XX_MODULE)
-static void spitz_pcmcia_pwr(struct device *scoop, uint16_t cpr, int nr)
-{
-	/* Only need to override behaviour for slot 0 */
-	if (nr == 0)
-		spitz_card_pwr_ctrl(
-			cpr & (SCOOP_CPR_CF_3V | SCOOP_CPR_CF_XV), cpr);
-	else
-		write_scoop_reg(scoop, SCOOP_CPR, cpr);
-}
-
-static struct scoop_pcmcia_dev spitz_pcmcia_scoop[] = {
-	{
-		.dev		= &spitz_scoop_1_device.dev,
-		.irq		= SPITZ_IRQ_GPIO_CF_IRQ,
-		.cd_irq		= SPITZ_IRQ_GPIO_CF_CD,
-		.cd_irq_str	= "PCMCIA0 CD",
-	}, {
-		.dev		= &spitz_scoop_2_device.dev,
-		.irq		= SPITZ_IRQ_GPIO_CF2_IRQ,
-		.cd_irq		= -1,
-	},
-};
-
-static struct scoop_pcmcia_config spitz_pcmcia_config = {
-	.devs		= &spitz_pcmcia_scoop[0],
-	.num_devs	= 2,
-	.power_ctrl	= spitz_pcmcia_pwr,
-};
-
-static void __init spitz_pcmcia_init(void)
-{
-	/* Akita has only one PCMCIA slot used */
-	if (machine_is_akita())
-		spitz_pcmcia_config.num_devs = 1;
-
-	platform_scoop_config = &spitz_pcmcia_config;
-}
-#else
-static inline void spitz_pcmcia_init(void) {}
-#endif
-
-/******************************************************************************
- * GPIO keyboard
- ******************************************************************************/
-#if defined(CONFIG_KEYBOARD_MATRIX) || defined(CONFIG_KEYBOARD_MATRIX_MODULE)
-
-#define SPITZ_KEY_CALENDAR	KEY_F1
-#define SPITZ_KEY_ADDRESS	KEY_F2
-#define SPITZ_KEY_FN		KEY_F3
-#define SPITZ_KEY_CANCEL	KEY_F4
-#define SPITZ_KEY_EXOK		KEY_F5
-#define SPITZ_KEY_EXCANCEL	KEY_F6
-#define SPITZ_KEY_EXJOGDOWN	KEY_F7
-#define SPITZ_KEY_EXJOGUP	KEY_F8
-#define SPITZ_KEY_JAP1		KEY_LEFTALT
-#define SPITZ_KEY_JAP2		KEY_RIGHTCTRL
-#define SPITZ_KEY_SYNC		KEY_F9
-#define SPITZ_KEY_MAIL		KEY_F10
-#define SPITZ_KEY_OK		KEY_F11
-#define SPITZ_KEY_MENU		KEY_F12
-
-static const uint32_t spitz_keymap[] = {
-	KEY(0, 0, KEY_LEFTCTRL),
-	KEY(0, 1, KEY_1),
-	KEY(0, 2, KEY_3),
-	KEY(0, 3, KEY_5),
-	KEY(0, 4, KEY_6),
-	KEY(0, 5, KEY_7),
-	KEY(0, 6, KEY_9),
-	KEY(0, 7, KEY_0),
-	KEY(0, 8, KEY_BACKSPACE),
-	KEY(0, 9, SPITZ_KEY_EXOK),	/* EXOK */
-	KEY(0, 10, SPITZ_KEY_EXCANCEL),	/* EXCANCEL */
-	KEY(1, 1, KEY_2),
-	KEY(1, 2, KEY_4),
-	KEY(1, 3, KEY_R),
-	KEY(1, 4, KEY_Y),
-	KEY(1, 5, KEY_8),
-	KEY(1, 6, KEY_I),
-	KEY(1, 7, KEY_O),
-	KEY(1, 8, KEY_P),
-	KEY(1, 9, SPITZ_KEY_EXJOGDOWN),	/* EXJOGDOWN */
-	KEY(1, 10, SPITZ_KEY_EXJOGUP),	/* EXJOGUP */
-	KEY(2, 0, KEY_TAB),
-	KEY(2, 1, KEY_Q),
-	KEY(2, 2, KEY_E),
-	KEY(2, 3, KEY_T),
-	KEY(2, 4, KEY_G),
-	KEY(2, 5, KEY_U),
-	KEY(2, 6, KEY_J),
-	KEY(2, 7, KEY_K),
-	KEY(3, 0, SPITZ_KEY_ADDRESS),	/* ADDRESS */
-	KEY(3, 1, KEY_W),
-	KEY(3, 2, KEY_S),
-	KEY(3, 3, KEY_F),
-	KEY(3, 4, KEY_V),
-	KEY(3, 5, KEY_H),
-	KEY(3, 6, KEY_M),
-	KEY(3, 7, KEY_L),
-	KEY(3, 9, KEY_RIGHTSHIFT),
-	KEY(4, 0, SPITZ_KEY_CALENDAR),	/* CALENDAR */
-	KEY(4, 1, KEY_A),
-	KEY(4, 2, KEY_D),
-	KEY(4, 3, KEY_C),
-	KEY(4, 4, KEY_B),
-	KEY(4, 5, KEY_N),
-	KEY(4, 6, KEY_DOT),
-	KEY(4, 8, KEY_ENTER),
-	KEY(4, 9, KEY_LEFTSHIFT),
-	KEY(5, 0, SPITZ_KEY_MAIL),	/* MAIL */
-	KEY(5, 1, KEY_Z),
-	KEY(5, 2, KEY_X),
-	KEY(5, 3, KEY_MINUS),
-	KEY(5, 4, KEY_SPACE),
-	KEY(5, 5, KEY_COMMA),
-	KEY(5, 7, KEY_UP),
-	KEY(5, 10, SPITZ_KEY_FN),	/* FN */
-	KEY(6, 0, KEY_SYSRQ),
-	KEY(6, 1, SPITZ_KEY_JAP1),	/* JAP1 */
-	KEY(6, 2, SPITZ_KEY_JAP2),	/* JAP2 */
-	KEY(6, 3, SPITZ_KEY_CANCEL),	/* CANCEL */
-	KEY(6, 4, SPITZ_KEY_OK),	/* OK */
-	KEY(6, 5, SPITZ_KEY_MENU),	/* MENU */
-	KEY(6, 6, KEY_LEFT),
-	KEY(6, 7, KEY_DOWN),
-	KEY(6, 8, KEY_RIGHT),
-};
-
-static const struct matrix_keymap_data spitz_keymap_data = {
-	.keymap		= spitz_keymap,
-	.keymap_size	= ARRAY_SIZE(spitz_keymap),
-};
-
-static const uint32_t spitz_row_gpios[] =
-		{ 12, 17, 91, 34, 36, 38, 39 };
-static const uint32_t spitz_col_gpios[] =
-		{ 88, 23, 24, 25, 26, 27, 52, 103, 107, 108, 114 };
-
-static struct matrix_keypad_platform_data spitz_mkp_pdata = {
-	.keymap_data		= &spitz_keymap_data,
-	.row_gpios		= spitz_row_gpios,
-	.col_gpios		= spitz_col_gpios,
-	.num_row_gpios		= ARRAY_SIZE(spitz_row_gpios),
-	.num_col_gpios		= ARRAY_SIZE(spitz_col_gpios),
-	.col_scan_delay_us	= 10,
-	.debounce_ms		= 10,
-	.wakeup			= 1,
-};
-
-static struct platform_device spitz_mkp_device = {
-	.name		= "matrix-keypad",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &spitz_mkp_pdata,
-	},
-};
-
-static void __init spitz_mkp_init(void)
-{
-	platform_device_register(&spitz_mkp_device);
-}
-#else
-static inline void spitz_mkp_init(void) {}
-#endif
-
-/******************************************************************************
- * GPIO keys
- ******************************************************************************/
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-static struct gpio_keys_button spitz_gpio_keys[] = {
-	{
-		.type	= EV_PWR,
-		.code	= KEY_SUSPEND,
-		.gpio	= SPITZ_GPIO_ON_KEY,
-		.desc	= "On Off",
-		.wakeup	= 1,
-	},
-	/* Two buttons detecting the lid state */
-	{
-		.type	= EV_SW,
-		.code	= 0,
-		.gpio	= SPITZ_GPIO_SWA,
-		.desc	= "Display Down",
-	},
-	{
-		.type	= EV_SW,
-		.code	= 1,
-		.gpio	= SPITZ_GPIO_SWB,
-		.desc	= "Lid Closed",
-	},
-};
-
-static struct gpio_keys_platform_data spitz_gpio_keys_platform_data = {
-	.buttons	= spitz_gpio_keys,
-	.nbuttons	= ARRAY_SIZE(spitz_gpio_keys),
-};
-
-static struct platform_device spitz_gpio_keys_device = {
-	.name	= "gpio-keys",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &spitz_gpio_keys_platform_data,
-	},
-};
-
-static void __init spitz_keys_init(void)
-{
-	platform_device_register(&spitz_gpio_keys_device);
-}
-#else
-static inline void spitz_keys_init(void) {}
-#endif
-
-/******************************************************************************
- * LEDs
- ******************************************************************************/
-#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
-static struct gpio_led spitz_gpio_leds[] = {
-	{
-		.name			= "spitz:amber:charge",
-		.default_trigger	= "sharpsl-charge",
-		.gpio			= SPITZ_GPIO_LED_ORANGE,
-	},
-	{
-		.name			= "spitz:green:hddactivity",
-		.default_trigger	= "ide-disk",
-		.gpio			= SPITZ_GPIO_LED_GREEN,
-	},
-};
-
-static struct gpio_led_platform_data spitz_gpio_leds_info = {
-	.leds		= spitz_gpio_leds,
-	.num_leds	= ARRAY_SIZE(spitz_gpio_leds),
-};
-
-static struct platform_device spitz_led_device = {
-	.name		= "leds-gpio",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &spitz_gpio_leds_info,
-	},
-};
-
-static void __init spitz_leds_init(void)
-{
-	platform_device_register(&spitz_led_device);
-}
-#else
-static inline void spitz_leds_init(void) {}
-#endif
-
-/******************************************************************************
- * SSP Devices
- ******************************************************************************/
-#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE)
-static void spitz_ads7846_wait_for_hsync(void)
-{
-	while (gpio_get_value(SPITZ_GPIO_HSYNC))
-		cpu_relax();
-
-	while (!gpio_get_value(SPITZ_GPIO_HSYNC))
-		cpu_relax();
-}
-
-static struct ads7846_platform_data spitz_ads7846_info = {
-	.model			= 7846,
-	.vref_delay_usecs	= 100,
-	.x_plate_ohms		= 419,
-	.y_plate_ohms		= 486,
-	.pressure_max		= 1024,
-	.gpio_pendown		= SPITZ_GPIO_TP_INT,
-	.wait_for_sync		= spitz_ads7846_wait_for_hsync,
-};
-
-static struct pxa2xx_spi_chip spitz_ads7846_chip = {
-	.gpio_cs		= SPITZ_GPIO_ADS7846_CS,
-};
-
-static void spitz_bl_kick_battery(void)
-{
-	void (*kick_batt)(void);
-
-	kick_batt = symbol_get(sharpsl_battery_kick);
-	if (kick_batt) {
-		kick_batt();
-		symbol_put(sharpsl_battery_kick);
-	}
-}
-
-static struct corgi_lcd_platform_data spitz_lcdcon_info = {
-	.init_mode		= CORGI_LCD_MODE_VGA,
-	.max_intensity		= 0x2f,
-	.default_intensity	= 0x1f,
-	.limit_mask		= 0x0b,
-	.gpio_backlight_cont	= SPITZ_GPIO_BACKLIGHT_CONT,
-	.gpio_backlight_on	= SPITZ_GPIO_BACKLIGHT_ON,
-	.kick_battery		= spitz_bl_kick_battery,
-};
-
-static struct pxa2xx_spi_chip spitz_lcdcon_chip = {
-	.gpio_cs	= SPITZ_GPIO_LCDCON_CS,
-};
-
-static struct pxa2xx_spi_chip spitz_max1111_chip = {
-	.gpio_cs	= SPITZ_GPIO_MAX1111_CS,
-};
-
-static struct spi_board_info spitz_spi_devices[] = {
-	{
-		.modalias		= "ads7846",
-		.max_speed_hz		= 1200000,
-		.bus_num		= 2,
-		.chip_select		= 0,
-		.platform_data		= &spitz_ads7846_info,
-		.controller_data	= &spitz_ads7846_chip,
-		.irq			= PXA_GPIO_TO_IRQ(SPITZ_GPIO_TP_INT),
-	}, {
-		.modalias		= "corgi-lcd",
-		.max_speed_hz		= 50000,
-		.bus_num		= 2,
-		.chip_select		= 1,
-		.platform_data		= &spitz_lcdcon_info,
-		.controller_data	= &spitz_lcdcon_chip,
-	}, {
-		.modalias		= "max1111",
-		.max_speed_hz		= 450000,
-		.bus_num		= 2,
-		.chip_select		= 2,
-		.controller_data	= &spitz_max1111_chip,
-	},
-};
-
-static struct pxa2xx_spi_master spitz_spi_info = {
-	.num_chipselect	= 3,
-};
-
-static void __init spitz_spi_init(void)
-{
-	struct corgi_lcd_platform_data *lcd_data = &spitz_lcdcon_info;
-
-	if (machine_is_akita()) {
-		lcd_data->gpio_backlight_cont = AKITA_GPIO_BACKLIGHT_CONT;
-		lcd_data->gpio_backlight_on = AKITA_GPIO_BACKLIGHT_ON;
-	}
-
-	pxa2xx_set_spi_info(2, &spitz_spi_info);
-	spi_register_board_info(ARRAY_AND_SIZE(spitz_spi_devices));
-}
-#else
-static inline void spitz_spi_init(void) {}
-#endif
-
-/******************************************************************************
- * SD/MMC card controller
- ******************************************************************************/
-#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
-/*
- * NOTE: The card detect interrupt isn't debounced so we delay it by 250ms to
- * give the card a chance to fully insert/eject.
- */
-static void spitz_mci_setpower(struct device *dev, unsigned int vdd)
-{
-	struct pxamci_platform_data* p_d = dev->platform_data;
-
-	if ((1 << vdd) & p_d->ocr_mask)
-		spitz_card_pwr_ctrl(SCOOP_CPR_SD_3V, SCOOP_CPR_SD_3V);
-	else
-		spitz_card_pwr_ctrl(SCOOP_CPR_SD_3V, 0x0);
-}
-
-static struct pxamci_platform_data spitz_mci_platform_data = {
-	.detect_delay_ms	= 250,
-	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
-	.setpower		= spitz_mci_setpower,
-	.gpio_card_detect	= SPITZ_GPIO_nSD_DETECT,
-	.gpio_card_ro		= SPITZ_GPIO_nSD_WP,
-	.gpio_power		= -1,
-};
-
-static void __init spitz_mmc_init(void)
-{
-	pxa_set_mci_info(&spitz_mci_platform_data);
-}
-#else
-static inline void spitz_mmc_init(void) {}
-#endif
-
-/******************************************************************************
- * USB Host
- ******************************************************************************/
-#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-static int spitz_ohci_init(struct device *dev)
-{
-	int err;
-
-	err = gpio_request(SPITZ_GPIO_USB_HOST, "USB_HOST");
-	if (err)
-		return err;
-
-	/* Only Port 2 is connected, setup USB Port 2 Output Control Register */
-	UP2OCR = UP2OCR_HXS | UP2OCR_HXOE | UP2OCR_DPPDE | UP2OCR_DMPDE;
-
-	return gpio_direction_output(SPITZ_GPIO_USB_HOST, 1);
-}
-
-static void spitz_ohci_exit(struct device *dev)
-{
-	gpio_free(SPITZ_GPIO_USB_HOST);
-}
-
-static struct pxaohci_platform_data spitz_ohci_platform_data = {
-	.port_mode	= PMM_NPS_MODE,
-	.init		= spitz_ohci_init,
-	.exit		= spitz_ohci_exit,
-	.flags		= ENABLE_PORT_ALL | NO_OC_PROTECTION,
-	.power_budget	= 150,
-};
-
-static void __init spitz_uhc_init(void)
-{
-	pxa_set_ohci_info(&spitz_ohci_platform_data);
-}
-#else
-static inline void spitz_uhc_init(void) {}
-#endif
-
-/******************************************************************************
- * IrDA
- ******************************************************************************/
-#if defined(CONFIG_PXA_FICP) || defined(CONFIG_PXA_FICP_MODULE)
-static struct pxaficp_platform_data spitz_ficp_platform_data = {
-	.transceiver_cap	= IR_SIRMODE | IR_OFF,
-};
-
-static void __init spitz_irda_init(void)
-{
-	if (machine_is_akita())
-		spitz_ficp_platform_data.gpio_pwdown = AKITA_GPIO_IR_ON;
-	else
-		spitz_ficp_platform_data.gpio_pwdown = SPITZ_GPIO_IR_ON;
-
-	pxa_set_ficp_info(&spitz_ficp_platform_data);
-}
-#else
-static inline void spitz_irda_init(void) {}
-#endif
-
-/******************************************************************************
- * Framebuffer
- ******************************************************************************/
-#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
-static struct pxafb_mode_info spitz_pxafb_modes[] = {
-	{
-		.pixclock       = 19231,
-		.xres           = 480,
-		.yres           = 640,
-		.bpp            = 16,
-		.hsync_len      = 40,
-		.left_margin    = 46,
-		.right_margin   = 125,
-		.vsync_len      = 3,
-		.upper_margin   = 1,
-		.lower_margin   = 0,
-		.sync           = 0,
-	}, {
-		.pixclock       = 134617,
-		.xres           = 240,
-		.yres           = 320,
-		.bpp            = 16,
-		.hsync_len      = 20,
-		.left_margin    = 20,
-		.right_margin   = 46,
-		.vsync_len      = 2,
-		.upper_margin   = 1,
-		.lower_margin   = 0,
-		.sync           = 0,
-	},
-};
-
-static struct pxafb_mach_info spitz_pxafb_info = {
-	.modes          = spitz_pxafb_modes,
-	.num_modes      = ARRAY_SIZE(spitz_pxafb_modes),
-	.fixed_modes    = 1,
-	.lcd_conn	= LCD_COLOR_TFT_16BPP | LCD_ALTERNATE_MAPPING,
-};
-
-static void __init spitz_lcd_init(void)
-{
-	pxa_set_fb_info(NULL, &spitz_pxafb_info);
-}
-#else
-static inline void spitz_lcd_init(void) {}
-#endif
-
-/******************************************************************************
- * Framebuffer
- ******************************************************************************/
-#if defined(CONFIG_MTD_NAND_SHARPSL) || defined(CONFIG_MTD_NAND_SHARPSL_MODULE)
-static struct mtd_partition spitz_nand_partitions[] = {
-	{
-		.name = "System Area",
-		.offset = 0,
-		.size = 7 * 1024 * 1024,
-	}, {
-		.name = "Root Filesystem",
-		.offset = 7 * 1024 * 1024,
-	}, {
-		.name = "Home Filesystem",
-		.offset = MTDPART_OFS_APPEND,
-		.size = MTDPART_SIZ_FULL,
-	},
-};
-
-static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
-
-static struct nand_bbt_descr spitz_nand_bbt = {
-	.options	= 0,
-	.offs		= 4,
-	.len		= 2,
-	.pattern	= scan_ff_pattern
-};
-
-static struct nand_ecclayout akita_oobinfo = {
-	.oobfree	= { {0x08, 0x09} },
-	.eccbytes	= 24,
-	.eccpos		= {
-			0x05, 0x01, 0x02, 0x03, 0x06, 0x07, 0x15, 0x11,
-			0x12, 0x13, 0x16, 0x17, 0x25, 0x21, 0x22, 0x23,
-			0x26, 0x27, 0x35, 0x31, 0x32, 0x33, 0x36, 0x37,
-	},
-};
-
-static struct sharpsl_nand_platform_data spitz_nand_pdata = {
-	.badblock_pattern	= &spitz_nand_bbt,
-	.partitions		= spitz_nand_partitions,
-	.nr_partitions		= ARRAY_SIZE(spitz_nand_partitions),
-};
-
-static struct resource spitz_nand_resources[] = {
-	{
-		.start	= PXA_CS3_PHYS,
-		.end	= PXA_CS3_PHYS + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device spitz_nand_device = {
-	.name		= "sharpsl-nand",
-	.id		= -1,
-	.resource	= spitz_nand_resources,
-	.num_resources	= ARRAY_SIZE(spitz_nand_resources),
-	.dev		= {
-		.platform_data	= &spitz_nand_pdata,
-	}
-};
-
-static void __init spitz_nand_init(void)
-{
-	if (machine_is_spitz()) {
-		spitz_nand_partitions[1].size = 5 * 1024 * 1024;
-	} else if (machine_is_akita()) {
-		spitz_nand_partitions[1].size = 58 * 1024 * 1024;
-		spitz_nand_bbt.len = 1;
-		spitz_nand_pdata.ecc_layout = &akita_oobinfo;
-	} else if (machine_is_borzoi()) {
-		spitz_nand_partitions[1].size = 32 * 1024 * 1024;
-		spitz_nand_bbt.len = 1;
-		spitz_nand_pdata.ecc_layout = &akita_oobinfo;
-	}
-
-	platform_device_register(&spitz_nand_device);
-}
-#else
-static inline void spitz_nand_init(void) {}
-#endif
-
-/******************************************************************************
- * NOR Flash
- ******************************************************************************/
-#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
-static struct mtd_partition spitz_rom_parts[] = {
-	{
-		.name	="Boot PROM Filesystem",
-		.offset	= 0x00140000,
-		.size	= MTDPART_SIZ_FULL,
-	},
-};
-
-static struct physmap_flash_data spitz_rom_data = {
-	.width		= 2,
-	.nr_parts	= ARRAY_SIZE(spitz_rom_parts),
-	.parts		= spitz_rom_parts,
-};
-
-static struct resource spitz_rom_resources[] = {
-	{
-		.start	= PXA_CS0_PHYS,
-		.end	= PXA_CS0_PHYS + SZ_8M - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device spitz_rom_device = {
-	.name		= "physmap-flash",
-	.id		= -1,
-	.resource	= spitz_rom_resources,
-	.num_resources	= ARRAY_SIZE(spitz_rom_resources),
-	.dev		= {
-		.platform_data	= &spitz_rom_data,
-	},
-};
-
-static void __init spitz_nor_init(void)
-{
-	platform_device_register(&spitz_rom_device);
-}
-#else
-static inline void spitz_nor_init(void) {}
-#endif
-
-/******************************************************************************
- * GPIO expander
- ******************************************************************************/
-#if defined(CONFIG_I2C_PXA) || defined(CONFIG_I2C_PXA_MODULE)
-static struct pca953x_platform_data akita_pca953x_pdata = {
-	.gpio_base		= AKITA_IOEXP_GPIO_BASE,
-};
-
-static struct i2c_board_info spitz_i2c_devs[] = {
-	{
-		.type		= "wm8750",
-		.addr		= 0x1b,
-	}, {
-		.type		= "max7310",
-		.addr		= 0x18,
-		.platform_data	= &akita_pca953x_pdata,
-	},
-};
-
-static struct regulator_consumer_supply isl6271a_consumers[] = {
-	{
-		.supply	= "vcc_core",
-	}
-};
-
-static struct regulator_init_data isl6271a_info[] = {
-	{
-		.constraints = {
-			.name		= "vcc_core range",
-			.min_uV		= 850000,
-			.max_uV		= 1600000,
-			.always_on	= 1,
-			.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE,
-		},
-	.consumer_supplies	= isl6271a_consumers,
-	.num_consumer_supplies	= ARRAY_SIZE(isl6271a_consumers),
-	}
-};
-
-static struct i2c_board_info spitz_pi2c_devs[] = {
-	{
-		.type		= "isl6271a",
-		.addr		= 0x0c,
-		.platform_data	= &isl6271a_info,
-	},
-};
-
-static void __init spitz_i2c_init(void)
-{
-	int size = ARRAY_SIZE(spitz_i2c_devs);
-
-	/* Only Akita has the max7310 chip */
-	if (!machine_is_akita())
-		size--;
-
-	pxa_set_i2c_info(NULL);
-	pxa27x_set_i2c_power_info(NULL);
-	i2c_register_board_info(0, spitz_i2c_devs, size);
-	i2c_register_board_info(1, ARRAY_AND_SIZE(spitz_pi2c_devs));
-}
-#else
-static inline void spitz_i2c_init(void) {}
-#endif
-
-/******************************************************************************
- * Machine init
- ******************************************************************************/
-static void spitz_poweroff(void)
-{
-	pxa_restart('g', NULL);
-}
-
-static void spitz_restart(char mode, const char *cmd)
-{
-	uint32_t msc0 = __raw_readl(MSC0);
-	/* Bootloader magic for a reboot */
-	if ((msc0 & 0xffff0000) == 0x7ff00000)
-		__raw_writel((msc0 & 0xffff) | 0x7ee00000, MSC0);
-
-	spitz_poweroff();
-}
-
-static void __init spitz_init(void)
-{
-	init_gpio_reset(SPITZ_GPIO_ON_RESET, 1, 0);
-	pm_power_off = spitz_poweroff;
-
-	PMCR = 0x00;
-
-	/* Stop 3.6MHz and drive HIGH to PCMCIA and CS */
-	PCFR |= PCFR_OPDE;
-
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(spitz_pin_config));
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	spitz_spi_init();
-	spitz_scoop_init();
-	spitz_mkp_init();
-	spitz_keys_init();
-	spitz_leds_init();
-	spitz_mmc_init();
-	spitz_pcmcia_init();
-	spitz_irda_init();
-	spitz_uhc_init();
-	spitz_lcd_init();
-	spitz_nor_init();
-	spitz_nand_init();
-	spitz_i2c_init();
-}
-
-static void __init spitz_fixup(struct tag *tags, char **cmdline,
-			       struct meminfo *mi)
-{
-	sharpsl_save_param();
-	mi->nr_banks = 1;
-	mi->bank[0].start = 0xa0000000;
-	mi->bank[0].size = (64*1024*1024);
-}
-
-#ifdef CONFIG_MACH_SPITZ
-MACHINE_START(SPITZ, "SHARP Spitz")
-	.restart_mode	= 'g',
-	.fixup		= spitz_fixup,
-	.map_io		= pxa27x_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa27x_init_irq,
-	.handle_irq	= pxa27x_handle_irq,
-	.init_machine	= spitz_init,
-	.timer		= &pxa_timer,
-	.restart	= spitz_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_BORZOI
-MACHINE_START(BORZOI, "SHARP Borzoi")
-	.restart_mode	= 'g',
-	.fixup		= spitz_fixup,
-	.map_io		= pxa27x_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa27x_init_irq,
-	.handle_irq	= pxa27x_handle_irq,
-	.init_machine	= spitz_init,
-	.timer		= &pxa_timer,
-	.restart	= spitz_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_AKITA
-MACHINE_START(AKITA, "SHARP Akita")
-	.restart_mode	= 'g',
-	.fixup		= spitz_fixup,
-	.map_io		= pxa27x_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa27x_init_irq,
-	.handle_irq	= pxa27x_handle_irq,
-	.init_machine	= spitz_init,
-	.timer		= &pxa_timer,
-	.restart	= spitz_restart,
-MACHINE_END
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/spitz_pm.c b/ANDROID_3.4.5/arch/arm/mach-pxa/spitz_pm.c
deleted file mode 100644
index 438f02fe..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/spitz_pm.c
+++ /dev/null
@@ -1,266 +0,0 @@
-/*
- * Battery and Power Management code for the Sharp SL-Cxx00
- *
- * Copyright (c) 2005 Richard Purdie
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/module.h>
-#include <linux/stat.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/gpio-pxa.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/apm-emulation.h>
-
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-#include <mach/hardware.h>
-
-#include <mach/spitz.h>
-#include <mach/pxa27x.h>
-#include <mach/sharpsl_pm.h>
-
-#include "generic.h"
-
-#define SHARPSL_CHARGE_ON_VOLT         0x99  /* 2.9V */
-#define SHARPSL_CHARGE_ON_TEMP         0xe0  /* 2.9V */
-#define SHARPSL_CHARGE_ON_ACIN_HIGH    0x9b  /* 6V */
-#define SHARPSL_CHARGE_ON_ACIN_LOW     0x34  /* 2V */
-#define SHARPSL_FATAL_ACIN_VOLT        182   /* 3.45V */
-#define SHARPSL_FATAL_NOACIN_VOLT      170   /* 3.40V */
-
-static int spitz_last_ac_status;
-
-static struct gpio spitz_charger_gpios[] = {
-	{ SPITZ_GPIO_KEY_INT,	GPIOF_IN, "Keyboard Interrupt" },
-	{ SPITZ_GPIO_SYNC,	GPIOF_IN, "Sync" },
-	{ SPITZ_GPIO_AC_IN,     GPIOF_IN, "Charger Detection" },
-	{ SPITZ_GPIO_ADC_TEMP_ON, GPIOF_OUT_INIT_LOW, "ADC Temp On" },
-	{ SPITZ_GPIO_JK_B,	  GPIOF_OUT_INIT_LOW, "JK B" },
-	{ SPITZ_GPIO_CHRG_ON,	  GPIOF_OUT_INIT_LOW, "Charger On" },
-};
-
-static void spitz_charger_init(void)
-{
-	gpio_request_array(ARRAY_AND_SIZE(spitz_charger_gpios));
-}
-
-static void spitz_measure_temp(int on)
-{
-	gpio_set_value(SPITZ_GPIO_ADC_TEMP_ON, on);
-}
-
-static void spitz_charge(int on)
-{
-	if (on) {
-		if (sharpsl_pm.flags & SHARPSL_SUSPENDED) {
-			gpio_set_value(SPITZ_GPIO_JK_B, 1);
-			gpio_set_value(SPITZ_GPIO_CHRG_ON, 0);
-		} else {
-			gpio_set_value(SPITZ_GPIO_JK_B, 0);
-			gpio_set_value(SPITZ_GPIO_CHRG_ON, 0);
-		}
-	} else {
-		gpio_set_value(SPITZ_GPIO_JK_B, 0);
-		gpio_set_value(SPITZ_GPIO_CHRG_ON, 1);
-	}
-}
-
-static void spitz_discharge(int on)
-{
-	gpio_set_value(SPITZ_GPIO_JK_A, on);
-}
-
-/* HACK - For unknown reasons, accurate voltage readings are only made with a load
-   on the power bus which the green led on spitz provides */
-static void spitz_discharge1(int on)
-{
-	gpio_set_value(SPITZ_GPIO_LED_GREEN, on);
-}
-
-static unsigned long gpio18_config[] = {
-	GPIO18_RDY,
-	GPIO18_GPIO,
-};
-
-static void spitz_presuspend(void)
-{
-	spitz_last_ac_status = sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN);
-
-	/* GPIO Sleep Register */
-	PGSR0 = 0x00144018;
-	PGSR1 = 0x00EF0000;
-	if (machine_is_akita()) {
-		PGSR2 = 0x2121C000;
-		PGSR3 = 0x00600400;
-	} else {
-		PGSR2 = 0x0121C000;
-		PGSR3 = 0x00600000;
-	}
-
-	PGSR0 &= ~SPITZ_GPIO_G0_STROBE_BIT;
-	PGSR1 &= ~SPITZ_GPIO_G1_STROBE_BIT;
-	PGSR2 &= ~SPITZ_GPIO_G2_STROBE_BIT;
-	PGSR3 &= ~SPITZ_GPIO_G3_STROBE_BIT;
-	PGSR2 |= GPIO_bit(SPITZ_GPIO_KEY_STROBE0);
-
-	pxa2xx_mfp_config(&gpio18_config[0], 1);
-	gpio_request_one(18, GPIOF_OUT_INIT_HIGH, "Unknown");
-	gpio_free(18);
-
-	PRER = GPIO_bit(SPITZ_GPIO_KEY_INT);
-	PFER = GPIO_bit(SPITZ_GPIO_KEY_INT) | GPIO_bit(SPITZ_GPIO_RESET);
-	PWER = GPIO_bit(SPITZ_GPIO_KEY_INT) | GPIO_bit(SPITZ_GPIO_RESET) | PWER_RTC;
-	PKWR = GPIO_bit(SPITZ_GPIO_SYNC) | GPIO_bit(SPITZ_GPIO_KEY_INT) | GPIO_bit(SPITZ_GPIO_RESET);
-	PKSR = 0xffffffff; /* clear */
-
-	/* nRESET_OUT Disable */
-	PSLR |= PSLR_SL_ROD;
-
-	/* Stop 3.6MHz and drive HIGH to PCMCIA and CS */
-	PCFR = PCFR_GPR_EN | PCFR_OPDE;
-}
-
-static void spitz_postsuspend(void)
-{
-	pxa2xx_mfp_config(&gpio18_config[1], 1);
-}
-
-static int spitz_should_wakeup(unsigned int resume_on_alarm)
-{
-	int is_resume = 0;
-	int acin = sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN);
-
-	if (spitz_last_ac_status != acin) {
-		if (acin) {
-			/* charge on */
-			sharpsl_pm.flags |= SHARPSL_DO_OFFLINE_CHRG;
-			dev_dbg(sharpsl_pm.dev, "AC Inserted\n");
-		} else {
-			/* charge off */
-			dev_dbg(sharpsl_pm.dev, "AC Removed\n");
-			sharpsl_pm_led(SHARPSL_LED_OFF);
-			sharpsl_pm.machinfo->charge(0);
-			sharpsl_pm.charge_mode = CHRG_OFF;
-		}
-		spitz_last_ac_status = acin;
-		/* Return to suspend as this must be what we were woken for */
-		return 0;
-	}
-
-	if (PEDR & GPIO_bit(SPITZ_GPIO_KEY_INT))
-		is_resume |= GPIO_bit(SPITZ_GPIO_KEY_INT);
-
-	if (PKSR & GPIO_bit(SPITZ_GPIO_SYNC))
-		is_resume |= GPIO_bit(SPITZ_GPIO_SYNC);
-
-	if (resume_on_alarm && (PEDR & PWER_RTC))
-		is_resume |= PWER_RTC;
-
-	dev_dbg(sharpsl_pm.dev, "is_resume: %x\n", is_resume);
-	return is_resume;
-}
-
-static unsigned long spitz_charger_wakeup(void)
-{
-	unsigned long ret;
-	ret = ((!gpio_get_value(SPITZ_GPIO_KEY_INT)
-		<< GPIO_bit(SPITZ_GPIO_KEY_INT))
-		| gpio_get_value(SPITZ_GPIO_SYNC));
-	return ret;
-}
-
-unsigned long spitzpm_read_devdata(int type)
-{
-	switch (type) {
-	case SHARPSL_STATUS_ACIN:
-		return !gpio_get_value(SPITZ_GPIO_AC_IN);
-	case SHARPSL_STATUS_LOCK:
-		return gpio_get_value(sharpsl_pm.machinfo->gpio_batlock);
-	case SHARPSL_STATUS_CHRGFULL:
-		return gpio_get_value(sharpsl_pm.machinfo->gpio_batfull);
-	case SHARPSL_STATUS_FATAL:
-		return gpio_get_value(sharpsl_pm.machinfo->gpio_fatal);
-	case SHARPSL_ACIN_VOLT:
-		return sharpsl_pm_pxa_read_max1111(MAX1111_ACIN_VOLT);
-	case SHARPSL_BATT_TEMP:
-		return sharpsl_pm_pxa_read_max1111(MAX1111_BATT_TEMP);
-	case SHARPSL_BATT_VOLT:
-	default:
-		return sharpsl_pm_pxa_read_max1111(MAX1111_BATT_VOLT);
-	}
-}
-
-struct sharpsl_charger_machinfo spitz_pm_machinfo = {
-	.init             = spitz_charger_init,
-	.exit             = NULL,
-	.gpio_batlock     = SPITZ_GPIO_BAT_COVER,
-	.gpio_acin        = SPITZ_GPIO_AC_IN,
-	.gpio_batfull     = SPITZ_GPIO_CHRG_FULL,
-	.batfull_irq	  = 1,
-	.gpio_fatal       = SPITZ_GPIO_FATAL_BAT,
-	.discharge        = spitz_discharge,
-	.discharge1       = spitz_discharge1,
-	.charge           = spitz_charge,
-	.measure_temp     = spitz_measure_temp,
-	.presuspend       = spitz_presuspend,
-	.postsuspend      = spitz_postsuspend,
-	.read_devdata     = spitzpm_read_devdata,
-	.charger_wakeup   = spitz_charger_wakeup,
-	.should_wakeup    = spitz_should_wakeup,
-#if defined(CONFIG_LCD_CORGI)
-	.backlight_limit = corgi_lcd_limit_intensity,
-#endif
-	.charge_on_volt	  = SHARPSL_CHARGE_ON_VOLT,
-	.charge_on_temp	  = SHARPSL_CHARGE_ON_TEMP,
-	.charge_acin_high = SHARPSL_CHARGE_ON_ACIN_HIGH,
-	.charge_acin_low  = SHARPSL_CHARGE_ON_ACIN_LOW,
-	.fatal_acin_volt  = SHARPSL_FATAL_ACIN_VOLT,
-	.fatal_noacin_volt= SHARPSL_FATAL_NOACIN_VOLT,
-	.bat_levels       = 40,
-	.bat_levels_noac  = sharpsl_battery_levels_noac,
-	.bat_levels_acin  = sharpsl_battery_levels_acin,
-	.status_high_acin = 188,
-	.status_low_acin  = 178,
-	.status_high_noac = 185,
-	.status_low_noac  = 175,
-};
-
-static struct platform_device *spitzpm_device;
-
-static int __devinit spitzpm_init(void)
-{
-	int ret;
-
-	if (!machine_is_spitz() && !machine_is_akita()
-			&& !machine_is_borzoi())
-		return -ENODEV;
-
-	spitzpm_device = platform_device_alloc("sharpsl-pm", -1);
-	if (!spitzpm_device)
-		return -ENOMEM;
-
-	spitzpm_device->dev.platform_data = &spitz_pm_machinfo;
-	ret = platform_device_add(spitzpm_device);
-
-	if (ret)
-		platform_device_put(spitzpm_device);
-
-	return ret;
-}
-
-static void spitzpm_exit(void)
-{
-	platform_device_unregister(spitzpm_device);
-}
-
-module_init(spitzpm_init);
-module_exit(spitzpm_exit);
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/standby.S b/ANDROID_3.4.5/arch/arm/mach-pxa/standby.S
deleted file mode 100644
index 29f5f5c1..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/standby.S
+++ /dev/null
@@ -1,114 +0,0 @@
-/*
- * PXA27x standby mode
- *
- * Author: David Burrage
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-#include <mach/hardware.h>
-
-#include <mach/pxa2xx-regs.h>
-
-		.text
-
-#ifdef CONFIG_PXA27x
-ENTRY(pxa_cpu_standby)
-	ldr	r0, =PSSR
-	mov	r1, #(PSSR_PH | PSSR_STS)
-	mov	r2, #PWRMODE_STANDBY
-	mov	r3, #UNCACHED_PHYS_0	@ Read mem context in.
-	ldr	ip, [r3]
-	b	1f
-
-	.align	5
-1:	mcr	p14, 0, r2, c7, c0, 0	@ put the system into Standby
-	str	r1, [r0]		@ make sure PSSR_PH/STS are clear
-	mov	pc, lr
-
-#endif
-
-#ifdef CONFIG_PXA3xx
-
-#define PXA3_MDCNFG		0x0000
-#define PXA3_MDCNFG_DMCEN	(1 << 30)
-#define PXA3_DDR_HCAL		0x0060
-#define PXA3_DDR_HCAL_HCRNG	0x1f
-#define PXA3_DDR_HCAL_HCPROG	(1 << 28)
-#define PXA3_DDR_HCAL_HCEN	(1 << 31)
-#define PXA3_DMCIER		0x0070
-#define PXA3_DMCIER_EDLP	(1 << 29)
-#define PXA3_DMCISR		0x0078
-#define PXA3_RCOMP		0x0100
-#define PXA3_RCOMP_SWEVAL	(1 << 31)
-
-ENTRY(pm_enter_standby_start)
-	mov	r1, #0xf6000000			@ DMEMC_REG_BASE (PXA3_MDCNFG)
-	add	r1, r1, #0x00100000
-
-	/*
-	 * Preload the TLB entry for accessing the dynamic memory
-	 * controller registers.  Note that page table lookups will
-	 * fail until the dynamic memory controller has been
-	 * reinitialised - and that includes MMU page table walks.
-	 * This also means that only the dynamic memory controller
-	 * can be reliably accessed in the code following standby.
-	 */
-	ldr	r2, [r1]			@ Dummy read PXA3_MDCNFG
-
-	mcr	p14, 0, r0, c7, c0, 0
-	.rept	8
-	nop
-	.endr
-
-	ldr	r0, [r1, #PXA3_DDR_HCAL]	@ Clear (and wait for) HCEN
-	bic	r0, r0, #PXA3_DDR_HCAL_HCEN
-	str	r0, [r1, #PXA3_DDR_HCAL]
-1:	ldr	r0, [r1, #PXA3_DDR_HCAL]
-	tst	r0, #PXA3_DDR_HCAL_HCEN
-	bne	1b
-
-	ldr	r0, [r1, #PXA3_RCOMP]		@ Initiate RCOMP
-	orr	r0, r0, #PXA3_RCOMP_SWEVAL
-	str	r0, [r1, #PXA3_RCOMP]
-
-	mov	r0, #~0				@ Clear interrupts
-	str	r0, [r1, #PXA3_DMCISR]
-
-	ldr	r0, [r1, #PXA3_DMCIER]		@ set DMIER[EDLP]
-	orr	r0, r0, #PXA3_DMCIER_EDLP
-	str	r0, [r1, #PXA3_DMCIER]
-
-	ldr	r0, [r1, #PXA3_DDR_HCAL]	@ clear HCRNG, set HCPROG, HCEN
-	bic	r0, r0, #PXA3_DDR_HCAL_HCRNG
-	orr	r0, r0, #PXA3_DDR_HCAL_HCEN | PXA3_DDR_HCAL_HCPROG
-	str	r0, [r1, #PXA3_DDR_HCAL]
-
-1:	ldr	r0, [r1, #PXA3_DMCISR]
-	tst	r0, #PXA3_DMCIER_EDLP
-	beq	1b
-
-	ldr	r0, [r1, #PXA3_MDCNFG]		@ set PXA3_MDCNFG[DMCEN]
-	orr	r0, r0, #PXA3_MDCNFG_DMCEN
-	str	r0, [r1, #PXA3_MDCNFG]
-1:	ldr	r0, [r1, #PXA3_MDCNFG]
-	tst	r0, #PXA3_MDCNFG_DMCEN
-	beq	1b
-
-	ldr	r0, [r1, #PXA3_DDR_HCAL]	@ set PXA3_DDR_HCAL[HCRNG]
-	orr	r0, r0, #2 @ HCRNG
-	str	r0, [r1, #PXA3_DDR_HCAL]
-
-	ldr	r0, [r1, #PXA3_DMCIER]		@ Clear the interrupt
-	bic	r0, r0, #0x20000000
-	str	r0, [r1, #PXA3_DMCIER]
-
-	mov	pc, lr
-ENTRY(pm_enter_standby_end)
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/stargate2.c b/ANDROID_3.4.5/arch/arm/mach-pxa/stargate2.c
deleted file mode 100644
index 4cd645e2..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/stargate2.c
+++ /dev/null
@@ -1,1030 +0,0 @@
-/*
- *  linux/arch/arm/mach-pxa/stargate2.c
- *
- *  Author:	Ed C. Epp
- *  Created:	Nov 05, 2002
- *  Copyright:	Intel Corp.
- *
- *  Modified 2009:  Jonathan Cameron <jic23@cam.ac.uk>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/interrupt.h>
-#include <linux/sched.h>
-#include <linux/bitops.h>
-#include <linux/fb.h>
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/regulator/machine.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/plat-ram.h>
-#include <linux/mtd/partitions.h>
-
-#include <linux/i2c/pxa-i2c.h>
-#include <linux/i2c/pcf857x.h>
-#include <linux/i2c/at24.h>
-#include <linux/smc91x.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-
-#include <asm/types.h>
-#include <asm/setup.h>
-#include <asm/memory.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/flash.h>
-
-#include <mach/pxa27x.h>
-#include <mach/mmc.h>
-#include <mach/udc.h>
-#include <mach/pxa27x-udc.h>
-#include <mach/smemc.h>
-
-#include <linux/spi/spi.h>
-#include <linux/spi/pxa2xx_spi.h>
-#include <linux/mfd/da903x.h>
-#include <linux/sht15.h>
-
-#include "devices.h"
-#include "generic.h"
-
-#define STARGATE_NR_IRQS	(IRQ_BOARD_START + 8)
-
-/* Bluetooth */
-#define SG2_BT_RESET		81
-
-/* SD */
-#define SG2_GPIO_nSD_DETECT	90
-#define SG2_SD_POWER_ENABLE	89
-
-static unsigned long sg2_im2_unified_pin_config[] __initdata = {
-	/* Device Identification for wakeup*/
-	GPIO102_GPIO,
-	/* DA9030 */
-	GPIO1_GPIO,
-
-	/* MMC */
-	GPIO32_MMC_CLK,
-	GPIO112_MMC_CMD,
-	GPIO92_MMC_DAT_0,
-	GPIO109_MMC_DAT_1,
-	GPIO110_MMC_DAT_2,
-	GPIO111_MMC_DAT_3,
-
-	/* 802.15.4 radio - driver out of mainline */
-	GPIO22_GPIO,			/* CC_RSTN */
-	GPIO114_GPIO,			/* CC_FIFO */
-	GPIO116_GPIO,			/* CC_CCA */
-	GPIO0_GPIO,			/* CC_FIFOP */
-	GPIO16_GPIO,			/* CCSFD */
-	GPIO115_GPIO,			/* Power enable */
-
-	/* I2C */
-	GPIO117_I2C_SCL,
-	GPIO118_I2C_SDA,
-
-	/* SSP 3 - 802.15.4 radio */
-	GPIO39_GPIO,			/* Chip Select */
-	GPIO34_SSP3_SCLK,
-	GPIO35_SSP3_TXD,
-	GPIO41_SSP3_RXD,
-
-	/* SSP 2 to daughter boards */
-	GPIO11_SSP2_RXD,
-	GPIO38_SSP2_TXD,
-	GPIO36_SSP2_SCLK,
-	GPIO37_GPIO, /* chip select */
-
-	/* SSP 1 - to daughter boards */
-	GPIO24_GPIO,			/* Chip Select */
-	GPIO23_SSP1_SCLK,
-	GPIO25_SSP1_TXD,
-	GPIO26_SSP1_RXD,
-
-	/* BTUART Basic Connector*/
-	GPIO42_BTUART_RXD,
-	GPIO43_BTUART_TXD,
-	GPIO44_BTUART_CTS,
-	GPIO45_BTUART_RTS,
-
-	/* STUART  - IM2 via debug board not sure on SG2*/
-	GPIO46_STUART_RXD,
-	GPIO47_STUART_TXD,
-
-	/* Basic sensor board */
-	GPIO96_GPIO,	/* accelerometer interrupt */
-	GPIO99_GPIO,	/* ADC interrupt */
-
-	/* SHT15 */
-	GPIO100_GPIO,
-	GPIO98_GPIO,
-
-	/* Basic sensor board */
-	GPIO96_GPIO,	/* accelerometer interrupt */
-	GPIO99_GPIO,	/* ADC interrupt */
-
-	/* Connector pins specified as gpios */
-	GPIO94_GPIO, /* large basic connector pin 14 */
-	GPIO10_GPIO, /* large basic connector pin 23 */
-};
-
-static struct sht15_platform_data platform_data_sht15 = {
-	.gpio_data =  100,
-	.gpio_sck  =  98,
-};
-
-static struct platform_device sht15 = {
-	.name = "sht15",
-	.id = -1,
-	.dev = {
-		.platform_data = &platform_data_sht15,
-	},
-};
-
-static struct regulator_consumer_supply stargate2_sensor_3_con[] = {
-	{
-		.dev_name = "sht15",
-		.supply = "vcc",
-	},
-};
-
-enum stargate2_ldos{
-	vcc_vref,
-	vcc_cc2420,
-	/* a mote connector? */
-	vcc_mica,
-	/* the CSR bluecore chip */
-	vcc_bt,
-	/* The two voltages available to sensor boards */
-	vcc_sensor_1_8,
-	vcc_sensor_3,
-	/* directly connected to the pxa27x */
-	vcc_sram_ext,
-	vcc_pxa_pll,
-	vcc_pxa_usim, /* Reference voltage for certain gpios */
-	vcc_pxa_mem,
-	vcc_pxa_flash,
-	vcc_pxa_core, /*Dc-Dc buck not yet supported */
-	vcc_lcd,
-	vcc_bb,
-	vcc_bbio, /*not sure!*/
-	vcc_io, /* cc2420 802.15.4 radio and pxa vcc_io ?*/
-};
-
-/* The values of the various regulator constraints are obviously dependent
- * on exactly what is wired to each ldo.  Unfortunately this information is
- * not generally available.  More information has been requested from Xbow.
- */
-static struct regulator_init_data stargate2_ldo_init_data[] = {
-	[vcc_bbio] = {
-		.constraints = { /* board default 1.8V */
-			.name = "vcc_bbio",
-			.min_uV = 1800000,
-			.max_uV = 1800000,
-		},
-	},
-	[vcc_bb] = {
-		.constraints = { /* board default 2.8V */
-			.name = "vcc_bb",
-			.min_uV = 2700000,
-			.max_uV = 3000000,
-		},
-	},
-	[vcc_pxa_flash] = {
-		.constraints = {/* default is 1.8V */
-			.name = "vcc_pxa_flash",
-			.min_uV = 1800000,
-			.max_uV = 1800000,
-		},
-	},
-	[vcc_cc2420] = { /* also vcc_io */
-		.constraints = {
-			/* board default is 2.8V */
-			.name = "vcc_cc2420",
-			.min_uV = 2700000,
-			.max_uV = 3300000,
-		},
-	},
-	[vcc_vref] = { /* Reference for what? */
-		.constraints = { /* default 1.8V */
-			.name = "vcc_vref",
-			.min_uV = 1800000,
-			.max_uV = 1800000,
-		},
-	},
-	[vcc_sram_ext] = {
-		.constraints = { /* default 2.8V */
-			.name = "vcc_sram_ext",
-			.min_uV = 2800000,
-			.max_uV = 2800000,
-		},
-	},
-	[vcc_mica] = {
-		.constraints = { /* default 2.8V */
-			.name = "vcc_mica",
-			.min_uV = 2800000,
-			.max_uV = 2800000,
-		},
-	},
-	[vcc_bt] = {
-		.constraints = { /* default 2.8V */
-			.name = "vcc_bt",
-			.min_uV = 2800000,
-			.max_uV = 2800000,
-		},
-	},
-	[vcc_lcd] = {
-		.constraints = { /* default 2.8V */
-			.name = "vcc_lcd",
-			.min_uV = 2700000,
-			.max_uV = 3300000,
-		},
-	},
-	[vcc_io] = { /* Same or higher than everything
-			  * bar vccbat and vccusb */
-		.constraints = { /* default 2.8V */
-			.name = "vcc_io",
-			.min_uV = 2692000,
-			.max_uV = 3300000,
-		},
-	},
-	[vcc_sensor_1_8] = {
-		.constraints = { /* default 1.8V */
-			.name = "vcc_sensor_1_8",
-			.min_uV = 1800000,
-			.max_uV = 1800000,
-		},
-	},
-	[vcc_sensor_3] = { /* curiously default 2.8V */
-		.constraints = {
-			.name = "vcc_sensor_3",
-			.min_uV = 2800000,
-			.max_uV = 3000000,
-		},
-		.num_consumer_supplies = ARRAY_SIZE(stargate2_sensor_3_con),
-		.consumer_supplies = stargate2_sensor_3_con,
-	},
-	[vcc_pxa_pll] = { /* 1.17V - 1.43V, default 1.3V*/
-		.constraints = {
-			.name = "vcc_pxa_pll",
-			.min_uV = 1170000,
-			.max_uV = 1430000,
-		},
-	},
-	[vcc_pxa_usim] = {
-		.constraints = { /* default 1.8V */
-			.name = "vcc_pxa_usim",
-			.min_uV = 1710000,
-			.max_uV = 2160000,
-		},
-	},
-	[vcc_pxa_mem] = {
-		.constraints = { /* default 1.8V */
-			.name = "vcc_pxa_mem",
-			.min_uV = 1800000,
-			.max_uV = 1800000,
-		},
-	},
-};
-
-static struct mtd_partition stargate2flash_partitions[] = {
-	{
-		.name = "Bootloader",
-		.size = 0x00040000,
-		.offset = 0,
-		.mask_flags = 0,
-	}, {
-		.name = "Kernel",
-		.size = 0x00200000,
-		.offset = 0x00040000,
-		.mask_flags = 0
-	}, {
-		.name = "Filesystem",
-		.size = 0x01DC0000,
-		.offset = 0x00240000,
-		.mask_flags = 0
-	},
-};
-
-static struct resource flash_resources = {
-	.start = PXA_CS0_PHYS,
-	.end = PXA_CS0_PHYS + SZ_32M - 1,
-	.flags = IORESOURCE_MEM,
-};
-
-static struct flash_platform_data stargate2_flash_data = {
-	.map_name = "cfi_probe",
-	.parts = stargate2flash_partitions,
-	.nr_parts = ARRAY_SIZE(stargate2flash_partitions),
-	.name = "PXA27xOnChipROM",
-	.width = 2,
-};
-
-static struct platform_device stargate2_flash_device = {
-	.name = "pxa2xx-flash",
-	.id = 0,
-	.dev = {
-		.platform_data = &stargate2_flash_data,
-	},
-	.resource = &flash_resources,
-	.num_resources = 1,
-};
-
-static struct pxa2xx_spi_master pxa_ssp_master_0_info = {
-	.num_chipselect = 1,
-};
-
-static struct pxa2xx_spi_master pxa_ssp_master_1_info = {
-	.num_chipselect = 1,
-};
-
-static struct pxa2xx_spi_master pxa_ssp_master_2_info = {
-	.num_chipselect = 1,
-};
-
-/* An upcoming kernel change will scrap SFRM usage so these
- * drivers have been moved to use gpio's via cs_control */
-static struct pxa2xx_spi_chip staccel_chip_info = {
-	.tx_threshold = 8,
-	.rx_threshold = 8,
-	.dma_burst_size = 8,
-	.timeout = 235,
-	.gpio_cs = 24,
-};
-
-static struct pxa2xx_spi_chip cc2420_info = {
-	.tx_threshold = 8,
-	.rx_threshold = 8,
-	.dma_burst_size = 8,
-	.timeout = 235,
-	.gpio_cs = 39,
-};
-
-static struct spi_board_info spi_board_info[] __initdata = {
-	{
-		.modalias = "lis3l02dq",
-		.max_speed_hz = 8000000,/* 8MHz max spi frequency at 3V */
-		.bus_num = 1,
-		.chip_select = 0,
-		.controller_data = &staccel_chip_info,
-		.irq = PXA_GPIO_TO_IRQ(96),
-	}, {
-		.modalias = "cc2420",
-		.max_speed_hz = 6500000,
-		.bus_num = 3,
-		.chip_select = 0,
-		.controller_data = &cc2420_info,
-	},
-};
-
-static void sg2_udc_command(int cmd)
-{
-	switch (cmd) {
-	case PXA2XX_UDC_CMD_CONNECT:
-		UP2OCR |=  UP2OCR_HXOE  | UP2OCR_DPPUE | UP2OCR_DPPUBE;
-		break;
-	case PXA2XX_UDC_CMD_DISCONNECT:
-		UP2OCR &= ~(UP2OCR_HXOE  | UP2OCR_DPPUE | UP2OCR_DPPUBE);
-		break;
-	}
-}
-
-static struct i2c_pxa_platform_data i2c_pwr_pdata = {
-	.fast_mode = 1,
-};
-
-static struct i2c_pxa_platform_data i2c_pdata = {
-	.fast_mode = 1,
-};
-
-static void __init imote2_stargate2_init(void)
-{
-
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(sg2_im2_unified_pin_config));
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	pxa2xx_set_spi_info(1, &pxa_ssp_master_0_info);
-	pxa2xx_set_spi_info(2, &pxa_ssp_master_1_info);
-	pxa2xx_set_spi_info(3, &pxa_ssp_master_2_info);
-	spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
-
-
-	pxa27x_set_i2c_power_info(&i2c_pwr_pdata);
-	pxa_set_i2c_info(&i2c_pdata);
-}
-
-#ifdef CONFIG_MACH_INTELMOTE2
-/* As the the imote2 doesn't currently have a conventional SD slot
- * there is no option to hotplug cards, making all this rather simple
- */
-static int imote2_mci_get_ro(struct device *dev)
-{
-	return 0;
-}
-
-/* Rather simple case as hotplugging not possible */
-static struct pxamci_platform_data imote2_mci_platform_data = {
-	.ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, /* default anyway */
-	.get_ro = imote2_mci_get_ro,
-	.gpio_card_detect = -1,
-	.gpio_card_ro	= -1,
-	.gpio_power = -1,
-};
-
-static struct gpio_led imote2_led_pins[] = {
-	{
-		.name       =  "imote2:red",
-		.gpio       = 103,
-		.active_low = 1,
-	}, {
-		.name       = "imote2:green",
-		.gpio       = 104,
-		.active_low = 1,
-	}, {
-		.name       = "imote2:blue",
-		.gpio       = 105,
-		.active_low = 1,
-	},
-};
-
-static struct gpio_led_platform_data imote2_led_data = {
-	.num_leds = ARRAY_SIZE(imote2_led_pins),
-	.leds     = imote2_led_pins,
-};
-
-static struct platform_device imote2_leds = {
-	.name = "leds-gpio",
-	.id   = -1,
-	.dev = {
-		.platform_data = &imote2_led_data,
-	},
-};
-
-static struct da903x_subdev_info imote2_da9030_subdevs[] = {
-	{
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO2,
-		.platform_data = &stargate2_ldo_init_data[vcc_bbio],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO3,
-		.platform_data = &stargate2_ldo_init_data[vcc_bb],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO4,
-		.platform_data = &stargate2_ldo_init_data[vcc_pxa_flash],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO5,
-		.platform_data = &stargate2_ldo_init_data[vcc_cc2420],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO6,
-		.platform_data = &stargate2_ldo_init_data[vcc_vref],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO7,
-		.platform_data = &stargate2_ldo_init_data[vcc_sram_ext],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO8,
-		.platform_data = &stargate2_ldo_init_data[vcc_mica],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO9,
-		.platform_data = &stargate2_ldo_init_data[vcc_bt],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO10,
-		.platform_data = &stargate2_ldo_init_data[vcc_sensor_1_8],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO11,
-		.platform_data = &stargate2_ldo_init_data[vcc_sensor_3],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO12,
-		.platform_data = &stargate2_ldo_init_data[vcc_lcd],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO15,
-		.platform_data = &stargate2_ldo_init_data[vcc_pxa_pll],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO17,
-		.platform_data = &stargate2_ldo_init_data[vcc_pxa_usim],
-	}, {
-		.name = "da903x-regulator", /*pxa vcc i/o and cc2420 vcc i/o */
-		.id = DA9030_ID_LDO18,
-		.platform_data = &stargate2_ldo_init_data[vcc_io],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO19,
-		.platform_data = &stargate2_ldo_init_data[vcc_pxa_mem],
-	},
-};
-
-static struct da903x_platform_data imote2_da9030_pdata = {
-	.num_subdevs = ARRAY_SIZE(imote2_da9030_subdevs),
-	.subdevs = imote2_da9030_subdevs,
-};
-
-static struct i2c_board_info __initdata imote2_pwr_i2c_board_info[] = {
-	{
-		.type = "da9030",
-		.addr = 0x49,
-		.platform_data = &imote2_da9030_pdata,
-		.irq = PXA_GPIO_TO_IRQ(1),
-	},
-};
-
-static struct i2c_board_info __initdata imote2_i2c_board_info[] = {
-	{ /* UCAM sensor board */
-		.type = "max1239",
-		.addr = 0x35,
-	}, { /* ITS400 Sensor board only */
-		.type = "max1363",
-		.addr = 0x34,
-		/* Through a nand gate - Also beware, on V2 sensor board the
-		 * pull up resistors are missing.
-		 */
-		.irq = PXA_GPIO_TO_IRQ(99),
-	}, { /* ITS400 Sensor board only */
-		.type = "tsl2561",
-		.addr = 0x49,
-		/* Through a nand gate - Also beware, on V2 sensor board the
-		 * pull up resistors are missing.
-		 */
-		.irq = PXA_GPIO_TO_IRQ(99),
-	}, { /* ITS400 Sensor board only */
-		.type = "tmp175",
-		.addr = 0x4A,
-		.irq = PXA_GPIO_TO_IRQ(96),
-	}, { /* IMB400 Multimedia board */
-		.type = "wm8940",
-		.addr = 0x1A,
-	},
-};
-
-static unsigned long imote2_pin_config[] __initdata = {
-
-	/* Button */
-	GPIO91_GPIO,
-
-	/* LEDS */
-	GPIO103_GPIO, /* red led */
-	GPIO104_GPIO, /* green led */
-	GPIO105_GPIO, /* blue led */
-};
-
-static struct pxa2xx_udc_mach_info imote2_udc_info __initdata = {
-	.udc_command		= sg2_udc_command,
-};
-
-static struct platform_device imote2_audio_device = {
-	.name = "imote2-audio",
-	.id   = -1,
-};
-
-static struct platform_device *imote2_devices[] = {
-	&stargate2_flash_device,
-	&imote2_leds,
-	&sht15,
-	&imote2_audio_device,
-};
-
-static void __init imote2_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(imote2_pin_config));
-
-	imote2_stargate2_init();
-
-	platform_add_devices(imote2_devices, ARRAY_SIZE(imote2_devices));
-
-	i2c_register_board_info(0, imote2_i2c_board_info,
-				ARRAY_SIZE(imote2_i2c_board_info));
-	i2c_register_board_info(1, imote2_pwr_i2c_board_info,
-				ARRAY_SIZE(imote2_pwr_i2c_board_info));
-
-	pxa_set_mci_info(&imote2_mci_platform_data);
-	pxa_set_udc_info(&imote2_udc_info);
-}
-#endif
-
-#ifdef CONFIG_MACH_STARGATE2
-
-static unsigned long stargate2_pin_config[] __initdata = {
-
-	GPIO15_nCS_1, /* SRAM */
-	/* SMC91x */
-	GPIO80_nCS_4,
-	GPIO40_GPIO, /*cable detect?*/
-
-	/* Button */
-	GPIO91_GPIO | WAKEUP_ON_LEVEL_HIGH,
-
-	/* Compact Flash */
-	GPIO79_PSKTSEL,
-	GPIO48_nPOE,
-	GPIO49_nPWE,
-	GPIO50_nPIOR,
-	GPIO51_nPIOW,
-	GPIO85_nPCE_1,
-	GPIO54_nPCE_2,
-	GPIO55_nPREG,
-	GPIO56_nPWAIT,
-	GPIO57_nIOIS16,
-	GPIO120_GPIO, /* Buff ctrl */
-	GPIO108_GPIO, /* Power ctrl */
-	GPIO82_GPIO, /* Reset */
-	GPIO53_GPIO, /* SG2_S0_GPIO_DETECT */
-
-	/* MMC not shared with imote2 */
-	GPIO90_GPIO, /* nSD detect */
-	GPIO89_GPIO, /* SD_POWER_ENABLE */
-
-	/* Bluetooth */
-	GPIO81_GPIO, /* reset */
-};
-
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.name = "smc91x-regs",
-		.start = (PXA_CS4_PHYS + 0x300),
-		.end = (PXA_CS4_PHYS + 0xfffff),
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = PXA_GPIO_TO_IRQ(40),
-		.end = PXA_GPIO_TO_IRQ(40),
-		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	}
-};
-
-static struct smc91x_platdata stargate2_smc91x_info = {
-	.flags = SMC91X_USE_8BIT | SMC91X_USE_16BIT | SMC91X_USE_32BIT
-	| SMC91X_NOWAIT | SMC91X_USE_DMA,
-};
-
-static struct platform_device smc91x_device = {
-	.name = "smc91x",
-	.id = -1,
-	.num_resources = ARRAY_SIZE(smc91x_resources),
-	.resource = smc91x_resources,
-	.dev = {
-		.platform_data = &stargate2_smc91x_info,
-	},
-};
-
-
-/*
- * The card detect interrupt isn't debounced so we delay it by 250ms
- * to give the card a chance to fully insert / eject.
- */
-static int stargate2_mci_init(struct device *dev,
-			      irq_handler_t stargate2_detect_int,
-			      void *data)
-{
-	int err;
-
-	err = gpio_request(SG2_SD_POWER_ENABLE, "SG2_sd_power_enable");
-	if (err) {
-		printk(KERN_ERR "Can't get the gpio for SD power control");
-		goto return_err;
-	}
-	gpio_direction_output(SG2_SD_POWER_ENABLE, 0);
-
-	err = gpio_request(SG2_GPIO_nSD_DETECT, "SG2_sd_detect");
-	if (err) {
-		printk(KERN_ERR "Can't get the sd detect gpio");
-		goto free_power_en;
-	}
-	gpio_direction_input(SG2_GPIO_nSD_DETECT);
-
-	err = request_irq(PXA_GPIO_TO_IRQ(SG2_GPIO_nSD_DETECT),
-			  stargate2_detect_int,
-			  IRQ_TYPE_EDGE_BOTH,
-			  "MMC card detect",
-			  data);
-	if (err) {
-		printk(KERN_ERR "can't request MMC card detect IRQ\n");
-		goto free_nsd_detect;
-	}
-	return 0;
-
- free_nsd_detect:
-	gpio_free(SG2_GPIO_nSD_DETECT);
- free_power_en:
-	gpio_free(SG2_SD_POWER_ENABLE);
- return_err:
-	return err;
-}
-
-/**
- * stargate2_mci_setpower() - set state of mmc power supply
- *
- * Very simple control. Either it is on or off and is controlled by
- * a gpio pin */
-static void stargate2_mci_setpower(struct device *dev, unsigned int vdd)
-{
-	gpio_set_value(SG2_SD_POWER_ENABLE, !!vdd);
-}
-
-static void stargate2_mci_exit(struct device *dev, void *data)
-{
-	free_irq(PXA_GPIO_TO_IRQ(SG2_GPIO_nSD_DETECT), data);
-	gpio_free(SG2_SD_POWER_ENABLE);
-	gpio_free(SG2_GPIO_nSD_DETECT);
-}
-
-static struct pxamci_platform_data stargate2_mci_platform_data = {
-	.detect_delay_ms = 250,
-	.ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
-	.init = stargate2_mci_init,
-	.setpower = stargate2_mci_setpower,
-	.exit = stargate2_mci_exit,
-};
-
-
-/*
- * SRAM - The Stargate 2 has 32MB of SRAM.
- *
- * Here it is made available as an MTD. This will then
- * typically have a cifs filesystem created on it to provide
- * fast temporary storage.
- */
-static struct resource sram_resources = {
-	.start = PXA_CS1_PHYS,
-	.end = PXA_CS1_PHYS + SZ_32M-1,
-	.flags = IORESOURCE_MEM,
-};
-
-static struct platdata_mtd_ram stargate2_sram_pdata = {
-	.mapname = "Stargate2 SRAM",
-	.bankwidth = 2,
-};
-
-static struct platform_device stargate2_sram = {
-	.name = "mtd-ram",
-	.id = 0,
-	.resource = &sram_resources,
-	.num_resources = 1,
-	.dev = {
-		.platform_data = &stargate2_sram_pdata,
-	},
-};
-
-static struct pcf857x_platform_data platform_data_pcf857x = {
-	.gpio_base = 128,
-	.n_latch = 0,
-	.setup = NULL,
-	.teardown = NULL,
-	.context = NULL,
-};
-
-static struct at24_platform_data pca9500_eeprom_pdata = {
-	.byte_len = 256,
-	.page_size = 4,
-};
-
-/**
- * stargate2_reset_bluetooth() reset the bluecore to ensure consistent state
- **/
-static int stargate2_reset_bluetooth(void)
-{
-	int err;
-	err = gpio_request(SG2_BT_RESET, "SG2_BT_RESET");
-	if (err) {
-		printk(KERN_ERR "Could not get gpio for bluetooth reset\n");
-		return err;
-	}
-	gpio_direction_output(SG2_BT_RESET, 1);
-	mdelay(5);
-	/* now reset it - 5 msec minimum */
-	gpio_set_value(SG2_BT_RESET, 0);
-	mdelay(10);
-	gpio_set_value(SG2_BT_RESET, 1);
-	gpio_free(SG2_BT_RESET);
-	return 0;
-}
-
-static struct led_info stargate2_leds[] = {
-	{
-		.name = "sg2:red",
-		.flags = DA9030_LED_RATE_ON,
-	}, {
-		.name = "sg2:blue",
-		.flags = DA9030_LED_RATE_ON,
-	}, {
-		.name = "sg2:green",
-		.flags = DA9030_LED_RATE_ON,
-	},
-};
-
-static struct da903x_subdev_info stargate2_da9030_subdevs[] = {
-	{
-		.name = "da903x-led",
-		.id = DA9030_ID_LED_2,
-		.platform_data = &stargate2_leds[0],
-	}, {
-		.name = "da903x-led",
-		.id = DA9030_ID_LED_3,
-		.platform_data = &stargate2_leds[2],
-	}, {
-		.name = "da903x-led",
-		.id = DA9030_ID_LED_4,
-		.platform_data = &stargate2_leds[1],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO2,
-		.platform_data = &stargate2_ldo_init_data[vcc_bbio],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO3,
-		.platform_data = &stargate2_ldo_init_data[vcc_bb],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO4,
-		.platform_data = &stargate2_ldo_init_data[vcc_pxa_flash],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO5,
-		.platform_data = &stargate2_ldo_init_data[vcc_cc2420],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO6,
-		.platform_data = &stargate2_ldo_init_data[vcc_vref],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO7,
-		.platform_data = &stargate2_ldo_init_data[vcc_sram_ext],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO8,
-		.platform_data = &stargate2_ldo_init_data[vcc_mica],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO9,
-		.platform_data = &stargate2_ldo_init_data[vcc_bt],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO10,
-		.platform_data = &stargate2_ldo_init_data[vcc_sensor_1_8],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO11,
-		.platform_data = &stargate2_ldo_init_data[vcc_sensor_3],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO12,
-		.platform_data = &stargate2_ldo_init_data[vcc_lcd],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO15,
-		.platform_data = &stargate2_ldo_init_data[vcc_pxa_pll],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO17,
-		.platform_data = &stargate2_ldo_init_data[vcc_pxa_usim],
-	}, {
-		.name = "da903x-regulator", /*pxa vcc i/o and cc2420 vcc i/o */
-		.id = DA9030_ID_LDO18,
-		.platform_data = &stargate2_ldo_init_data[vcc_io],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO19,
-		.platform_data = &stargate2_ldo_init_data[vcc_pxa_mem],
-	},
-};
-
-static struct da903x_platform_data stargate2_da9030_pdata = {
-	.num_subdevs = ARRAY_SIZE(stargate2_da9030_subdevs),
-	.subdevs = stargate2_da9030_subdevs,
-};
-
-static struct i2c_board_info __initdata stargate2_pwr_i2c_board_info[] = {
-	{
-		.type = "da9030",
-		.addr = 0x49,
-		.platform_data = &stargate2_da9030_pdata,
-		.irq = PXA_GPIO_TO_IRQ(1),
-	},
-};
-
-static struct i2c_board_info __initdata stargate2_i2c_board_info[] = {
-	/* Techically this a pca9500 - but it's compatible with the 8574
-	 * for gpio expansion and the 24c02 for eeprom access.
-	 */
-	{
-		.type = "pcf8574",
-		.addr =  0x27,
-		.platform_data = &platform_data_pcf857x,
-	}, {
-		.type = "24c02",
-		.addr = 0x57,
-		.platform_data = &pca9500_eeprom_pdata,
-	}, {
-		.type = "max1238",
-		.addr = 0x35,
-	}, { /* ITS400 Sensor board only */
-		.type = "max1363",
-		.addr = 0x34,
-		/* Through a nand gate - Also beware, on V2 sensor board the
-		 * pull up resistors are missing.
-		 */
-		.irq = PXA_GPIO_TO_IRQ(99),
-	}, { /* ITS400 Sensor board only */
-		.type = "tsl2561",
-		.addr = 0x49,
-		/* Through a nand gate - Also beware, on V2 sensor board the
-		 * pull up resistors are missing.
-		 */
-		.irq = PXA_GPIO_TO_IRQ(99),
-	}, { /* ITS400 Sensor board only */
-		.type = "tmp175",
-		.addr = 0x4A,
-		.irq = PXA_GPIO_TO_IRQ(96),
-	},
-};
-
-/* Board doesn't support cable detection - so always lie and say
- * something is there.
- */
-static int sg2_udc_detect(void)
-{
-	return 1;
-}
-
-static struct pxa2xx_udc_mach_info stargate2_udc_info __initdata = {
-	.udc_is_connected	= sg2_udc_detect,
-	.udc_command		= sg2_udc_command,
-};
-
-static struct platform_device *stargate2_devices[] = {
-	&stargate2_flash_device,
-	&stargate2_sram,
-	&smc91x_device,
-	&sht15,
-};
-
-static void __init stargate2_init(void)
-{
-	/* This is probably a board specific hack as this must be set
-	   prior to connecting the MFP stuff up. */
-	__raw_writel(__raw_readl(MECR) & ~MECR_NOS, MECR);
-
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(stargate2_pin_config));
-
-	imote2_stargate2_init();
-
-	platform_add_devices(ARRAY_AND_SIZE(stargate2_devices));
-
-	i2c_register_board_info(0, ARRAY_AND_SIZE(stargate2_i2c_board_info));
-	i2c_register_board_info(1, stargate2_pwr_i2c_board_info,
-				ARRAY_SIZE(stargate2_pwr_i2c_board_info));
-
-	pxa_set_mci_info(&stargate2_mci_platform_data);
-
-	pxa_set_udc_info(&stargate2_udc_info);
-
-	stargate2_reset_bluetooth();
-}
-#endif
-
-#ifdef CONFIG_MACH_INTELMOTE2
-MACHINE_START(INTELMOTE2, "IMOTE 2")
-	.map_io		= pxa27x_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa27x_init_irq,
-	.handle_irq	= pxa27x_handle_irq,
-	.timer		= &pxa_timer,
-	.init_machine	= imote2_init,
-	.atag_offset	= 0x100,
-	.restart	= pxa_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_STARGATE2
-MACHINE_START(STARGATE2, "Stargate 2")
-	.map_io = pxa27x_map_io,
-	.nr_irqs = STARGATE_NR_IRQS,
-	.init_irq = pxa27x_init_irq,
-	.handle_irq = pxa27x_handle_irq,
-	.timer = &pxa_timer,
-	.init_machine = stargate2_init,
-	.atag_offset = 0x100,
-	.restart	= pxa_restart,
-MACHINE_END
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/tavorevb.c b/ANDROID_3.4.5/arch/arm/mach-pxa/tavorevb.c
deleted file mode 100644
index 736bfdc5..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/tavorevb.c
+++ /dev/null
@@ -1,500 +0,0 @@
-/*
- *  linux/arch/arm/mach-pxa/tavorevb.c
- *
- *  Support for the Marvell PXA930 Evaluation Board
- *
- *  Copyright (C) 2007-2008 Marvell International Ltd.
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  publishhed by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/clk.h>
-#include <linux/gpio.h>
-#include <linux/smc91x.h>
-#include <linux/pwm_backlight.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include <mach/pxa930.h>
-#include <mach/pxafb.h>
-#include <plat/pxa27x_keypad.h>
-
-#include "devices.h"
-#include "generic.h"
-
-/* Tavor EVB MFP configurations */
-static mfp_cfg_t tavorevb_mfp_cfg[] __initdata = {
-	/* Ethernet */
-	DF_nCS1_nCS3,
-	GPIO47_GPIO,
-
-	/* LCD */
-	GPIO23_LCD_DD0,
-	GPIO24_LCD_DD1,
-	GPIO25_LCD_DD2,
-	GPIO26_LCD_DD3,
-	GPIO27_LCD_DD4,
-	GPIO28_LCD_DD5,
-	GPIO29_LCD_DD6,
-	GPIO44_LCD_DD7,
-	GPIO21_LCD_CS,
-	GPIO22_LCD_CS2,
-
-	GPIO17_LCD_FCLK_RD,
-	GPIO18_LCD_LCLK_A0,
-	GPIO19_LCD_PCLK_WR,
-
-	/* LCD Backlight */
-	GPIO43_PWM3,	/* primary backlight */
-	GPIO32_PWM0,	/* secondary backlight */
-
-	/* Keypad */
-	GPIO0_KP_MKIN_0,
-	GPIO2_KP_MKIN_1,
-	GPIO4_KP_MKIN_2,
-	GPIO6_KP_MKIN_3,
-	GPIO8_KP_MKIN_4,
-	GPIO10_KP_MKIN_5,
-	GPIO12_KP_MKIN_6,
-	GPIO1_KP_MKOUT_0,
-	GPIO3_KP_MKOUT_1,
-	GPIO5_KP_MKOUT_2,
-	GPIO7_KP_MKOUT_3,
-	GPIO9_KP_MKOUT_4,
-	GPIO11_KP_MKOUT_5,
-	GPIO13_KP_MKOUT_6,
-
-	GPIO14_KP_DKIN_2,
-	GPIO15_KP_DKIN_3,
-};
-
-#define TAVOREVB_ETH_PHYS	(0x14000000)
-
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.start	= (TAVOREVB_ETH_PHYS + 0x300),
-		.end	= (TAVOREVB_ETH_PHYS + 0xfffff),
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO47)),
-		.end	= PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO47)),
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	}
-};
-
-static struct smc91x_platdata tavorevb_smc91x_info = {
-	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT | SMC91X_USE_DMA,
-};
-
-static struct platform_device smc91x_device = {
-	.name		= "smc91x",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(smc91x_resources),
-	.resource	= smc91x_resources,
-	.dev		= {
-		.platform_data = &tavorevb_smc91x_info,
-	},
-};
-
-#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
-static unsigned int tavorevb_matrix_key_map[] = {
-	/* KEY(row, col, key_code) */
-	KEY(0, 4, KEY_A), KEY(0, 5, KEY_B), KEY(0, 6, KEY_C),
-	KEY(1, 4, KEY_E), KEY(1, 5, KEY_F), KEY(1, 6, KEY_G),
-	KEY(2, 4, KEY_I), KEY(2, 5, KEY_J), KEY(2, 6, KEY_K),
-	KEY(3, 4, KEY_M), KEY(3, 5, KEY_N), KEY(3, 6, KEY_O),
-	KEY(4, 5, KEY_R), KEY(4, 6, KEY_S),
-	KEY(5, 4, KEY_U), KEY(5, 4, KEY_V), KEY(5, 6, KEY_W),
-
-	KEY(6, 4, KEY_Y), KEY(6, 5, KEY_Z),
-
-	KEY(0, 3, KEY_0), KEY(2, 0, KEY_1), KEY(2, 1, KEY_2), KEY(2, 2, KEY_3),
-	KEY(2, 3, KEY_4), KEY(1, 0, KEY_5), KEY(1, 1, KEY_6), KEY(1, 2, KEY_7),
-	KEY(1, 3, KEY_8), KEY(0, 2, KEY_9),
-
-	KEY(6, 6, KEY_SPACE),
-	KEY(0, 0, KEY_KPASTERISK), 	/* * */
-	KEY(0, 1, KEY_KPDOT), 		/* # */
-
-	KEY(4, 1, KEY_UP),
-	KEY(4, 3, KEY_DOWN),
-	KEY(4, 0, KEY_LEFT),
-	KEY(4, 2, KEY_RIGHT),
-	KEY(6, 0, KEY_HOME),
-	KEY(3, 2, KEY_END),
-	KEY(6, 1, KEY_DELETE),
-	KEY(5, 2, KEY_BACK),
-	KEY(6, 3, KEY_CAPSLOCK),	/* KEY_LEFTSHIFT), */
-
-	KEY(4, 4, KEY_ENTER),		/* scroll push */
-	KEY(6, 2, KEY_ENTER),		/* keypad action */
-
-	KEY(3, 1, KEY_SEND),
-	KEY(5, 3, KEY_RECORD),
-	KEY(5, 0, KEY_VOLUMEUP),
-	KEY(5, 1, KEY_VOLUMEDOWN),
-
-	KEY(3, 0, KEY_F22),	/* soft1 */
-	KEY(3, 3, KEY_F23),	/* soft2 */
-};
-
-static struct pxa27x_keypad_platform_data tavorevb_keypad_info = {
-	.matrix_key_rows	= 7,
-	.matrix_key_cols	= 7,
-	.matrix_key_map		= tavorevb_matrix_key_map,
-	.matrix_key_map_size	= ARRAY_SIZE(tavorevb_matrix_key_map),
-	.debounce_interval	= 30,
-};
-
-static void __init tavorevb_init_keypad(void)
-{
-	pxa_set_keypad_info(&tavorevb_keypad_info);
-}
-#else
-static inline void tavorevb_init_keypad(void) {}
-#endif /* CONFIG_KEYBOARD_PXA27x || CONFIG_KEYBOARD_PXA27x_MODULE */
-
-#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
-static struct platform_pwm_backlight_data tavorevb_backlight_data[] = {
-	[0] = {
-		/* primary backlight */
-		.pwm_id		= 2,
-		.max_brightness	= 100,
-		.dft_brightness	= 100,
-		.pwm_period_ns	= 100000,
-	},
-	[1] = {
-		/* secondary backlight */
-		.pwm_id		= 0,
-		.max_brightness	= 100,
-		.dft_brightness	= 100,
-		.pwm_period_ns	= 100000,
-	},
-};
-
-static struct platform_device tavorevb_backlight_devices[] = {
-	[0] = {
-		.name		= "pwm-backlight",
-		.id		= 0,
-		.dev		= {
-			.platform_data = &tavorevb_backlight_data[0],
-		},
-	},
-	[1] = {
-		.name		= "pwm-backlight",
-		.id		= 1,
-		.dev		= {
-			.platform_data = &tavorevb_backlight_data[1],
-		},
-	},
-};
-
-static uint16_t panel_init[] = {
-	/* DSTB OUT */
-	SMART_CMD(0x00),
-	SMART_CMD_NOOP,
-	SMART_DELAY(1),
-
-	SMART_CMD(0x00),
-	SMART_CMD_NOOP,
-	SMART_DELAY(1),
-
-	SMART_CMD(0x00),
-	SMART_CMD_NOOP,
-	SMART_DELAY(1),
-
-	/* STB OUT */
-	SMART_CMD(0x00),
-	SMART_CMD(0x1D),
-	SMART_DAT(0x00),
-	SMART_DAT(0x05),
-	SMART_DELAY(1),
-
-	/* P-ON Init sequence */
-	SMART_CMD(0x00), /* OSC ON */
-	SMART_CMD(0x00),
-	SMART_DAT(0x00),
-	SMART_DAT(0x01),
-	SMART_CMD(0x00),
-	SMART_CMD(0x01), /* SOURCE DRIVER SHIFT DIRECTION and display RAM setting */
-	SMART_DAT(0x01),
-	SMART_DAT(0x27),
-	SMART_CMD(0x00),
-	SMART_CMD(0x02), /* LINE INV */
-	SMART_DAT(0x02),
-	SMART_DAT(0x00),
-	SMART_CMD(0x00),
-	SMART_CMD(0x03), /* IF mode(1) */
-	SMART_DAT(0x01), /* 8bit smart mode(8-8),high speed write mode */
-	SMART_DAT(0x30),
-	SMART_CMD(0x07),
-	SMART_CMD(0x00), /* RAM Write Mode */
-	SMART_DAT(0x00),
-	SMART_DAT(0x03),
-	SMART_CMD(0x00),
-
-	/* DISPLAY Setting,  262K, fixed(NO scroll), no split screen */
-	SMART_CMD(0x07),
-	SMART_DAT(0x40), /* 16/18/19 BPP */
-	SMART_DAT(0x00),
-	SMART_CMD(0x00),
-	SMART_CMD(0x08), /* BP, FP Seting, BP=2H, FP=3H */
-	SMART_DAT(0x03),
-	SMART_DAT(0x02),
-	SMART_CMD(0x00),
-	SMART_CMD(0x0C), /* IF mode(2), using internal clock & MPU */
-	SMART_DAT(0x00),
-	SMART_DAT(0x00),
-	SMART_CMD(0x00),
-	SMART_CMD(0x0D), /* Frame setting, 1Min. Frequence, 16CLK */
-	SMART_DAT(0x00),
-	SMART_DAT(0x10),
-	SMART_CMD(0x00),
-	SMART_CMD(0x12), /* Timing(1),ASW W=4CLK, ASW ST=1CLK */
-	SMART_DAT(0x03),
-	SMART_DAT(0x02),
-	SMART_CMD(0x00),
-	SMART_CMD(0x13), /* Timing(2),OEV ST=0.5CLK, OEV ED=1CLK */
-	SMART_DAT(0x01),
-	SMART_DAT(0x02),
-	SMART_CMD(0x00),
-	SMART_CMD(0x14), /* Timing(3), ASW HOLD=0.5CLK */
-	SMART_DAT(0x00),
-	SMART_DAT(0x00),
-	SMART_CMD(0x00),
-	SMART_CMD(0x15), /* Timing(4), CKV ST=0CLK, CKV ED=1CLK */
-	SMART_DAT(0x20),
-	SMART_DAT(0x00),
-	SMART_CMD(0x00),
-	SMART_CMD(0x1C),
-	SMART_DAT(0x00),
-	SMART_DAT(0x00),
-	SMART_CMD(0x03),
-	SMART_CMD(0x00),
-	SMART_DAT(0x04),
-	SMART_DAT(0x03),
-	SMART_CMD(0x03),
-	SMART_CMD(0x01),
-	SMART_DAT(0x03),
-	SMART_DAT(0x04),
-	SMART_CMD(0x03),
-	SMART_CMD(0x02),
-	SMART_DAT(0x04),
-	SMART_DAT(0x03),
-	SMART_CMD(0x03),
-	SMART_CMD(0x03),
-	SMART_DAT(0x03),
-	SMART_DAT(0x03),
-	SMART_CMD(0x03),
-	SMART_CMD(0x04),
-	SMART_DAT(0x01),
-	SMART_DAT(0x01),
-	SMART_CMD(0x03),
-	SMART_CMD(0x05),
-	SMART_DAT(0x00),
-	SMART_DAT(0x00),
-	SMART_CMD(0x04),
-	SMART_CMD(0x02),
-	SMART_DAT(0x00),
-	SMART_DAT(0x00),
-	SMART_CMD(0x04),
-	SMART_CMD(0x03),
-	SMART_DAT(0x01),
-	SMART_DAT(0x3F),
-	SMART_DELAY(0),
-
-	/* DISP RAM setting: 240*320 */
-	SMART_CMD(0x04), /* HADDR, START 0 */
-	SMART_CMD(0x06),
-	SMART_DAT(0x00),
-	SMART_DAT(0x00), /* x1,3 */
-	SMART_CMD(0x04), /* HADDR,  END   4 */
-	SMART_CMD(0x07),
-	SMART_DAT(0x00),
-	SMART_DAT(0xEF), /* x2, 7 */
-	SMART_CMD(0x04), /* VADDR, START 8 */
-	SMART_CMD(0x08),
-	SMART_DAT(0x00), /* y1, 10 */
-	SMART_DAT(0x00), /* y1, 11 */
-	SMART_CMD(0x04), /* VADDR, END 12 */
-	SMART_CMD(0x09),
-	SMART_DAT(0x01), /* y2, 14 */
-	SMART_DAT(0x3F), /* y2, 15 */
-	SMART_CMD(0x02), /* RAM ADDR SETTING 16 */
-	SMART_CMD(0x00),
-	SMART_DAT(0x00),
-	SMART_DAT(0x00), /* x1, 19 */
-	SMART_CMD(0x02), /* RAM ADDR SETTING 20 */
-	SMART_CMD(0x01),
-	SMART_DAT(0x00), /* y1, 22 */
-	SMART_DAT(0x00), /* y1, 23 */
-};
-
-static uint16_t panel_on[] = {
-	/* Power-IC ON */
-	SMART_CMD(0x01),
-	SMART_CMD(0x02),
-	SMART_DAT(0x07),
-	SMART_DAT(0x7D),
-	SMART_CMD(0x01),
-	SMART_CMD(0x03),
-	SMART_DAT(0x00),
-	SMART_DAT(0x05),
-	SMART_CMD(0x01),
-	SMART_CMD(0x04),
-	SMART_DAT(0x00),
-	SMART_DAT(0x00),
-	SMART_CMD(0x01),
-	SMART_CMD(0x05),
-	SMART_DAT(0x00),
-	SMART_DAT(0x15),
-	SMART_CMD(0x01),
-	SMART_CMD(0x00),
-	SMART_DAT(0xC0),
-	SMART_DAT(0x10),
-	SMART_DELAY(30),
-
-	/* DISP ON */
-	SMART_CMD(0x01),
-	SMART_CMD(0x01),
-	SMART_DAT(0x00),
-	SMART_DAT(0x01),
-	SMART_CMD(0x01),
-	SMART_CMD(0x00),
-	SMART_DAT(0xFF),
-	SMART_DAT(0xFE),
-	SMART_DELAY(150),
-};
-
-static uint16_t panel_off[] = {
-	SMART_CMD(0x00),
-	SMART_CMD(0x1E),
-	SMART_DAT(0x00),
-	SMART_DAT(0x0A),
-	SMART_CMD(0x01),
-	SMART_CMD(0x00),
-	SMART_DAT(0xFF),
-	SMART_DAT(0xEE),
-	SMART_CMD(0x01),
-	SMART_CMD(0x00),
-	SMART_DAT(0xF8),
-	SMART_DAT(0x12),
-	SMART_CMD(0x01),
-	SMART_CMD(0x00),
-	SMART_DAT(0xE8),
-	SMART_DAT(0x11),
-	SMART_CMD(0x01),
-	SMART_CMD(0x00),
-	SMART_DAT(0xC0),
-	SMART_DAT(0x11),
-	SMART_CMD(0x01),
-	SMART_CMD(0x00),
-	SMART_DAT(0x40),
-	SMART_DAT(0x11),
-	SMART_CMD(0x01),
-	SMART_CMD(0x00),
-	SMART_DAT(0x00),
-	SMART_DAT(0x10),
-};
-
-static uint16_t update_framedata[] = {
-	/* write ram */
-	SMART_CMD(0x02),
-	SMART_CMD(0x02),
-
-	/* write frame data */
-	SMART_CMD_WRITE_FRAME,
-};
-
-static void ltm020d550_lcd_power(int on, struct fb_var_screeninfo *var)
-{
-	struct fb_info *info = container_of(var, struct fb_info, var);
-
-	if (on) {
-		pxafb_smart_queue(info, ARRAY_AND_SIZE(panel_init));
-		pxafb_smart_queue(info, ARRAY_AND_SIZE(panel_on));
-	} else {
-		pxafb_smart_queue(info, ARRAY_AND_SIZE(panel_off));
-	}
-
-	if (pxafb_smart_flush(info))
-		pr_err("%s: timed out\n", __func__);
-}
-
-static void ltm020d550_update(struct fb_info *info)
-{
-	pxafb_smart_queue(info, ARRAY_AND_SIZE(update_framedata));
-	pxafb_smart_flush(info);
-}
-
-static struct pxafb_mode_info toshiba_ltm020d550_modes[] = {
-	[0] = {
-		.xres			= 240,
-		.yres			= 320,
-		.bpp			= 16,
-		.a0csrd_set_hld		= 30,
-		.a0cswr_set_hld		= 30,
-		.wr_pulse_width		= 30,
-		.rd_pulse_width 	= 170,
-		.op_hold_time 		= 30,
-		.cmd_inh_time		= 60,
-
-		/* L_LCLK_A0 and L_LCLK_RD active low */
-		.sync			= FB_SYNC_HOR_HIGH_ACT |
-					  FB_SYNC_VERT_HIGH_ACT,
-	},
-};
-
-static struct pxafb_mach_info tavorevb_lcd_info = {
-	.modes			= toshiba_ltm020d550_modes,
-	.num_modes		= 1,
-	.lcd_conn		= LCD_SMART_PANEL_8BPP | LCD_PCLK_EDGE_FALL,
-	.pxafb_lcd_power	= ltm020d550_lcd_power,
-	.smart_update		= ltm020d550_update,
-};
-
-static void __init tavorevb_init_lcd(void)
-{
-	platform_device_register(&tavorevb_backlight_devices[0]);
-	platform_device_register(&tavorevb_backlight_devices[1]);
-	pxa_set_fb_info(NULL, &tavorevb_lcd_info);
-}
-#else
-static inline void tavorevb_init_lcd(void) {}
-#endif /* CONFIG_FB_PXA || CONFIG_FB_PXA_MODULE */
-
-static void __init tavorevb_init(void)
-{
-	/* initialize MFP configurations */
-	pxa3xx_mfp_config(ARRAY_AND_SIZE(tavorevb_mfp_cfg));
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	platform_device_register(&smc91x_device);
-
-	tavorevb_init_lcd();
-	tavorevb_init_keypad();
-}
-
-MACHINE_START(TAVOREVB, "PXA930 Evaluation Board (aka TavorEVB)")
-	/* Maintainer: Eric Miao <eric.miao@marvell.com> */
-	.atag_offset    = 0x100,
-	.map_io         = pxa3xx_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq       = pxa3xx_init_irq,
-	.handle_irq       = pxa3xx_handle_irq,
-	.timer          = &pxa_timer,
-	.init_machine   = tavorevb_init,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/tavorevb3.c b/ANDROID_3.4.5/arch/arm/mach-pxa/tavorevb3.c
deleted file mode 100644
index f7d9305c..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/tavorevb3.c
+++ /dev/null
@@ -1,136 +0,0 @@
-/*
- *  linux/arch/arm/mach-pxa/tavorevb3.c
- *
- *  Support for the Marvell EVB3 Development Platform.
- *
- *  Copyright:  (C) Copyright 2008-2010 Marvell International Ltd.
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  publishhed by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/i2c.h>
-#include <linux/i2c/pxa-i2c.h>
-#include <linux/gpio.h>
-#include <linux/mfd/88pm860x.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include <mach/pxa930.h>
-
-#include "devices.h"
-#include "generic.h"
-
-#define TAVOREVB3_NR_IRQS	(IRQ_BOARD_START + 24)
-
-static mfp_cfg_t evb3_mfp_cfg[] __initdata = {
-	/* UART */
-	GPIO53_UART1_TXD,
-	GPIO54_UART1_RXD,
-
-	/* PMIC */
-	PMIC_INT_GPIO83,
-};
-
-#if defined(CONFIG_I2C_PXA) || defined(CONFIG_I2C_PXA_MODULE)
-static struct pm860x_touch_pdata evb3_touch = {
-	.gpadc_prebias	= 1,
-	.slot_cycle	= 1,
-	.tsi_prebias	= 6,
-	.pen_prebias	= 16,
-	.pen_prechg	= 2,
-	.res_x		= 300,
-};
-
-static struct pm860x_backlight_pdata evb3_backlight[] = {
-	{
-		.id	= PM8606_ID_BACKLIGHT,
-		.iset	= PM8606_WLED_CURRENT(24),
-		.flags	= PM8606_BACKLIGHT1,
-	},
-	{},
-};
-
-static struct pm860x_led_pdata evb3_led[] = {
-	{
-		.id	= PM8606_ID_LED,
-		.iset	= PM8606_LED_CURRENT(12),
-		.flags	= PM8606_LED1_RED,
-	}, {
-		.id	= PM8606_ID_LED,
-		.iset	= PM8606_LED_CURRENT(12),
-		.flags	= PM8606_LED1_GREEN,
-	}, {
-		.id	= PM8606_ID_LED,
-		.iset	= PM8606_LED_CURRENT(12),
-		.flags	= PM8606_LED1_BLUE,
-	}, {
-		.id	= PM8606_ID_LED,
-		.iset	= PM8606_LED_CURRENT(12),
-		.flags	= PM8606_LED2_RED,
-	}, {
-		.id	= PM8606_ID_LED,
-		.iset	= PM8606_LED_CURRENT(12),
-		.flags	= PM8606_LED2_GREEN,
-	}, {
-		.id	= PM8606_ID_LED,
-		.iset	= PM8606_LED_CURRENT(12),
-		.flags	= PM8606_LED2_BLUE,
-	},
-};
-
-static struct pm860x_platform_data evb3_pm8607_info = {
-	.touch				= &evb3_touch,
-	.backlight			= &evb3_backlight[0],
-	.led				= &evb3_led[0],
-	.companion_addr			= 0x10,
-	.irq_mode			= 0,
-	.irq_base			= IRQ_BOARD_START,
-
-	.i2c_port			= GI2C_PORT,
-};
-
-static struct i2c_board_info evb3_i2c_info[] = {
-	{
-		.type		= "88PM860x",
-		.addr		= 0x34,
-		.platform_data	= &evb3_pm8607_info,
-		.irq		= PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO83)),
-	},
-};
-
-static void __init evb3_init_i2c(void)
-{
-	pxa_set_i2c_info(NULL);
-	i2c_register_board_info(0, ARRAY_AND_SIZE(evb3_i2c_info));
-}
-#else
-static inline void evb3_init_i2c(void) {}
-#endif
-
-static void __init evb3_init(void)
-{
-	/* initialize MFP configurations */
-	pxa3xx_mfp_config(ARRAY_AND_SIZE(evb3_mfp_cfg));
-
-	pxa_set_ffuart_info(NULL);
-
-	evb3_init_i2c();
-}
-
-MACHINE_START(TAVOREVB3, "PXA950 Evaluation Board (aka TavorEVB3)")
-	.atag_offset	= 0x100,
-	.map_io         = pxa3xx_map_io,
-	.nr_irqs	= TAVOREVB3_NR_IRQS,
-	.init_irq       = pxa3xx_init_irq,
-	.handle_irq       = pxa3xx_handle_irq,
-	.timer          = &pxa_timer,
-	.init_machine   = evb3_init,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/time.c b/ANDROID_3.4.5/arch/arm/mach-pxa/time.c
deleted file mode 100644
index 3d6c9bd9..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/time.c
+++ /dev/null
@@ -1,170 +0,0 @@
-/*
- * arch/arm/mach-pxa/time.c
- *
- * PXA clocksource, clockevents, and OST interrupt handlers.
- * Copyright (c) 2007 by Bill Gatliff <bgat@billgatliff.com>.
- *
- * Derived from Nicolas Pitre's PXA timer handler Copyright (c) 2001
- * by MontaVista Software, Inc.  (Nico, your code rocks!)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/clockchips.h>
-
-#include <asm/div64.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/time.h>
-#include <asm/sched_clock.h>
-#include <mach/regs-ost.h>
-#include <mach/irqs.h>
-
-/*
- * This is PXA's sched_clock implementation. This has a resolution
- * of at least 308 ns and a maximum value of 208 days.
- *
- * The return value is guaranteed to be monotonic in that range as
- * long as there is always less than 582 seconds between successive
- * calls to sched_clock() which should always be the case in practice.
- */
-
-static u32 notrace pxa_read_sched_clock(void)
-{
-	return OSCR;
-}
-
-
-#define MIN_OSCR_DELTA 16
-
-static irqreturn_t
-pxa_ost0_interrupt(int irq, void *dev_id)
-{
-	struct clock_event_device *c = dev_id;
-
-	/* Disarm the compare/match, signal the event. */
-	OIER &= ~OIER_E0;
-	OSSR = OSSR_M0;
-	c->event_handler(c);
-
-	return IRQ_HANDLED;
-}
-
-static int
-pxa_osmr0_set_next_event(unsigned long delta, struct clock_event_device *dev)
-{
-	unsigned long next, oscr;
-
-	OIER |= OIER_E0;
-	next = OSCR + delta;
-	OSMR0 = next;
-	oscr = OSCR;
-
-	return (signed)(next - oscr) <= MIN_OSCR_DELTA ? -ETIME : 0;
-}
-
-static void
-pxa_osmr0_set_mode(enum clock_event_mode mode, struct clock_event_device *dev)
-{
-	switch (mode) {
-	case CLOCK_EVT_MODE_ONESHOT:
-		OIER &= ~OIER_E0;
-		OSSR = OSSR_M0;
-		break;
-
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-		/* initializing, released, or preparing for suspend */
-		OIER &= ~OIER_E0;
-		OSSR = OSSR_M0;
-		break;
-
-	case CLOCK_EVT_MODE_RESUME:
-	case CLOCK_EVT_MODE_PERIODIC:
-		break;
-	}
-}
-
-static struct clock_event_device ckevt_pxa_osmr0 = {
-	.name		= "osmr0",
-	.features	= CLOCK_EVT_FEAT_ONESHOT,
-	.rating		= 200,
-	.set_next_event	= pxa_osmr0_set_next_event,
-	.set_mode	= pxa_osmr0_set_mode,
-};
-
-static struct irqaction pxa_ost0_irq = {
-	.name		= "ost0",
-	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= pxa_ost0_interrupt,
-	.dev_id		= &ckevt_pxa_osmr0,
-};
-
-static void __init pxa_timer_init(void)
-{
-	unsigned long clock_tick_rate = get_clock_tick_rate();
-
-	OIER = 0;
-	OSSR = OSSR_M0 | OSSR_M1 | OSSR_M2 | OSSR_M3;
-
-	setup_sched_clock(pxa_read_sched_clock, 32, clock_tick_rate);
-
-	clockevents_calc_mult_shift(&ckevt_pxa_osmr0, clock_tick_rate, 4);
-	ckevt_pxa_osmr0.max_delta_ns =
-		clockevent_delta2ns(0x7fffffff, &ckevt_pxa_osmr0);
-	ckevt_pxa_osmr0.min_delta_ns =
-		clockevent_delta2ns(MIN_OSCR_DELTA * 2, &ckevt_pxa_osmr0) + 1;
-	ckevt_pxa_osmr0.cpumask = cpumask_of(0);
-
-	setup_irq(IRQ_OST0, &pxa_ost0_irq);
-
-	clocksource_mmio_init(&OSCR, "oscr0", clock_tick_rate, 200, 32,
-		clocksource_mmio_readl_up);
-	clockevents_register_device(&ckevt_pxa_osmr0);
-}
-
-#ifdef CONFIG_PM
-static unsigned long osmr[4], oier, oscr;
-
-static void pxa_timer_suspend(void)
-{
-	osmr[0] = OSMR0;
-	osmr[1] = OSMR1;
-	osmr[2] = OSMR2;
-	osmr[3] = OSMR3;
-	oier = OIER;
-	oscr = OSCR;
-}
-
-static void pxa_timer_resume(void)
-{
-	/*
-	 * Ensure that we have at least MIN_OSCR_DELTA between match
-	 * register 0 and the OSCR, to guarantee that we will receive
-	 * the one-shot timer interrupt.  We adjust OSMR0 in preference
-	 * to OSCR to guarantee that OSCR is monotonically incrementing.
-	 */
-	if (osmr[0] - oscr < MIN_OSCR_DELTA)
-		osmr[0] += MIN_OSCR_DELTA;
-
-	OSMR0 = osmr[0];
-	OSMR1 = osmr[1];
-	OSMR2 = osmr[2];
-	OSMR3 = osmr[3];
-	OIER = oier;
-	OSCR = oscr;
-}
-#else
-#define pxa_timer_suspend NULL
-#define pxa_timer_resume NULL
-#endif
-
-struct sys_timer pxa_timer = {
-	.init		= pxa_timer_init,
-	.suspend	= pxa_timer_suspend,
-	.resume		= pxa_timer_resume,
-};
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/tosa-bt.c b/ANDROID_3.4.5/arch/arm/mach-pxa/tosa-bt.c
deleted file mode 100644
index b9b1e5c2..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/tosa-bt.c
+++ /dev/null
@@ -1,148 +0,0 @@
-/*
- * Bluetooth built-in chip control
- *
- * Copyright (c) 2008 Dmitry Baryshkov
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/delay.h>
-#include <linux/rfkill.h>
-
-#include <mach/tosa_bt.h>
-
-static void tosa_bt_on(struct tosa_bt_data *data)
-{
-	gpio_set_value(data->gpio_reset, 0);
-	gpio_set_value(data->gpio_pwr, 1);
-	gpio_set_value(data->gpio_reset, 1);
-	mdelay(20);
-	gpio_set_value(data->gpio_reset, 0);
-}
-
-static void tosa_bt_off(struct tosa_bt_data *data)
-{
-	gpio_set_value(data->gpio_reset, 1);
-	mdelay(10);
-	gpio_set_value(data->gpio_pwr, 0);
-	gpio_set_value(data->gpio_reset, 0);
-}
-
-static int tosa_bt_set_block(void *data, bool blocked)
-{
-	pr_info("BT_RADIO going: %s\n", blocked ? "off" : "on");
-
-	if (!blocked) {
-		pr_info("TOSA_BT: going ON\n");
-		tosa_bt_on(data);
-	} else {
-		pr_info("TOSA_BT: going OFF\n");
-		tosa_bt_off(data);
-	}
-
-	return 0;
-}
-
-static const struct rfkill_ops tosa_bt_rfkill_ops = {
-	.set_block = tosa_bt_set_block,
-};
-
-static int tosa_bt_probe(struct platform_device *dev)
-{
-	int rc;
-	struct rfkill *rfk;
-
-	struct tosa_bt_data *data = dev->dev.platform_data;
-
-	rc = gpio_request(data->gpio_reset, "Bluetooth reset");
-	if (rc)
-		goto err_reset;
-	rc = gpio_direction_output(data->gpio_reset, 0);
-	if (rc)
-		goto err_reset_dir;
-	rc = gpio_request(data->gpio_pwr, "Bluetooth power");
-	if (rc)
-		goto err_pwr;
-	rc = gpio_direction_output(data->gpio_pwr, 0);
-	if (rc)
-		goto err_pwr_dir;
-
-	rfk = rfkill_alloc("tosa-bt", &dev->dev, RFKILL_TYPE_BLUETOOTH,
-			   &tosa_bt_rfkill_ops, data);
-	if (!rfk) {
-		rc = -ENOMEM;
-		goto err_rfk_alloc;
-	}
-
-	rc = rfkill_register(rfk);
-	if (rc)
-		goto err_rfkill;
-
-	platform_set_drvdata(dev, rfk);
-
-	return 0;
-
-err_rfkill:
-	rfkill_destroy(rfk);
-err_rfk_alloc:
-	tosa_bt_off(data);
-err_pwr_dir:
-	gpio_free(data->gpio_pwr);
-err_pwr:
-err_reset_dir:
-	gpio_free(data->gpio_reset);
-err_reset:
-	return rc;
-}
-
-static int __devexit tosa_bt_remove(struct platform_device *dev)
-{
-	struct tosa_bt_data *data = dev->dev.platform_data;
-	struct rfkill *rfk = platform_get_drvdata(dev);
-
-	platform_set_drvdata(dev, NULL);
-
-	if (rfk) {
-		rfkill_unregister(rfk);
-		rfkill_destroy(rfk);
-	}
-	rfk = NULL;
-
-	tosa_bt_off(data);
-
-	gpio_free(data->gpio_pwr);
-	gpio_free(data->gpio_reset);
-
-	return 0;
-}
-
-static struct platform_driver tosa_bt_driver = {
-	.probe = tosa_bt_probe,
-	.remove = __devexit_p(tosa_bt_remove),
-
-	.driver = {
-		.name = "tosa-bt",
-		.owner = THIS_MODULE,
-	},
-};
-
-
-static int __init tosa_bt_init(void)
-{
-	return platform_driver_register(&tosa_bt_driver);
-}
-
-static void __exit tosa_bt_exit(void)
-{
-	platform_driver_unregister(&tosa_bt_driver);
-}
-
-module_init(tosa_bt_init);
-module_exit(tosa_bt_exit);
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/tosa.c b/ANDROID_3.4.5/arch/arm/mach-pxa/tosa.c
deleted file mode 100644
index 4d4eb60b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/tosa.c
+++ /dev/null
@@ -1,987 +0,0 @@
-/*
- *  Support for Sharp SL-C6000x PDAs
- *  Model: (Tosa)
- *
- *  Copyright (c) 2005 Dirk Opfer
- *
- *	Based on code written by Sharp/Lineo for 2.4 kernels
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/major.h>
-#include <linux/fs.h>
-#include <linux/interrupt.h>
-#include <linux/delay.h>
-#include <linux/fb.h>
-#include <linux/mmc/host.h>
-#include <linux/mfd/tc6393xb.h>
-#include <linux/mfd/tmio.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/pm.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/gpio.h>
-#include <linux/pda_power.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/pxa2xx_spi.h>
-#include <linux/input/matrix_keypad.h>
-#include <linux/i2c/pxa-i2c.h>
-#include <linux/usb/gpio_vbus.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-
-#include <mach/pxa25x.h>
-#include <mach/reset.h>
-#include <mach/irda.h>
-#include <mach/mmc.h>
-#include <mach/udc.h>
-#include <mach/tosa_bt.h>
-#include <mach/audio.h>
-#include <mach/smemc.h>
-
-#include <asm/mach/arch.h>
-#include <mach/tosa.h>
-
-#include <asm/hardware/scoop.h>
-#include <asm/mach/sharpsl_param.h>
-
-#include "generic.h"
-#include "clock.h"
-#include "devices.h"
-
-static unsigned long tosa_pin_config[] = {
-	GPIO78_nCS_2, /* Scoop */
-	GPIO80_nCS_4, /* tg6393xb */
-	GPIO33_nCS_5, /* Scoop */
-
-	// GPIO76 CARD_VCC_ON1
-
-	GPIO19_GPIO, /* Reset out */
-	GPIO1_RST | WAKEUP_ON_EDGE_FALL,
-
-	GPIO0_GPIO | WAKEUP_ON_EDGE_FALL, /* WAKE_UP */
-	GPIO2_GPIO | WAKEUP_ON_EDGE_BOTH, /* AC_IN */
-	GPIO3_GPIO | WAKEUP_ON_EDGE_FALL, /* RECORD */
-	GPIO4_GPIO | WAKEUP_ON_EDGE_FALL, /* SYNC */
-	GPIO20_GPIO, /* EAR_IN */
-	GPIO22_GPIO, /* On */
-
-	GPIO5_GPIO, /* USB_IN */
-	GPIO32_GPIO, /* Pen IRQ */
-
-	GPIO7_GPIO, /* Jacket Detect */
-	GPIO14_GPIO, /* BAT0_CRG */
-	GPIO12_GPIO, /* BAT1_CRG */
-	GPIO17_GPIO, /* BAT0_LOW */
-	GPIO84_GPIO, /* BAT1_LOW */
-	GPIO38_GPIO, /* BAT_LOCK */
-
-	GPIO11_3_6MHz,
-	GPIO15_GPIO, /* TC6393XB IRQ */
-	GPIO18_RDY,
-	GPIO27_GPIO, /* LCD Sync */
-
-	/* MMC */
-	GPIO6_MMC_CLK,
-	GPIO8_MMC_CS0,
-	GPIO9_GPIO, /* Detect */
-	GPIO10_GPIO, /* nSD_INT */
-
-	/* CF */
-	GPIO13_GPIO, /* CD_IRQ */
-	GPIO21_GPIO, /* Main Slot IRQ */
-	GPIO36_GPIO, /* Jacket Slot IRQ */
-	GPIO48_nPOE,
-	GPIO49_nPWE,
-	GPIO50_nPIOR,
-	GPIO51_nPIOW,
-	GPIO52_nPCE_1,
-	GPIO53_nPCE_2,
-	GPIO54_nPSKTSEL,
-	GPIO55_nPREG,
-	GPIO56_nPWAIT,
-	GPIO57_nIOIS16,
-
-	/* AC97 */
-	GPIO31_AC97_SYNC,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	// GPIO79 nAUD_IRQ
-
-	/* FFUART */
-	GPIO34_FFUART_RXD,
-	GPIO35_FFUART_CTS,
-	GPIO37_FFUART_DSR,
-	GPIO39_FFUART_TXD,
-	GPIO40_FFUART_DTR,
-	GPIO41_FFUART_RTS,
-
-	/* BTUART */
-	GPIO42_BTUART_RXD,
-	GPIO43_BTUART_TXD,
-	GPIO44_BTUART_CTS,
-	GPIO45_BTUART_RTS,
-
-	/* Keybd */
-	GPIO58_GPIO | MFP_LPM_DRIVE_LOW,	/* Column 0 */
-	GPIO59_GPIO | MFP_LPM_DRIVE_LOW,	/* Column 1 */
-	GPIO60_GPIO | MFP_LPM_DRIVE_LOW,	/* Column 2 */
-	GPIO61_GPIO | MFP_LPM_DRIVE_LOW,	/* Column 3 */
-	GPIO62_GPIO | MFP_LPM_DRIVE_LOW,	/* Column 4 */
-	GPIO63_GPIO | MFP_LPM_DRIVE_LOW,	/* Column 5 */
-	GPIO64_GPIO | MFP_LPM_DRIVE_LOW,	/* Column 6 */
-	GPIO65_GPIO | MFP_LPM_DRIVE_LOW,	/* Column 7 */
-	GPIO66_GPIO | MFP_LPM_DRIVE_LOW,	/* Column 8 */
-	GPIO67_GPIO | MFP_LPM_DRIVE_LOW,	/* Column 9 */
-	GPIO68_GPIO | MFP_LPM_DRIVE_LOW,	/* Column 10 */
-	GPIO69_GPIO | MFP_LPM_DRIVE_LOW,	/* Row 0 */
-	GPIO70_GPIO | MFP_LPM_DRIVE_LOW,	/* Row 1 */
-	GPIO71_GPIO | MFP_LPM_DRIVE_LOW,	/* Row 2 */
-	GPIO72_GPIO | MFP_LPM_DRIVE_LOW,	/* Row 3 */
-	GPIO73_GPIO | MFP_LPM_DRIVE_LOW,	/* Row 4 */
-	GPIO74_GPIO | MFP_LPM_DRIVE_LOW,	/* Row 5 */
-	GPIO75_GPIO | MFP_LPM_DRIVE_LOW,	/* Row 6 */
-
-	/* SPI */
-	GPIO81_SSP2_CLK_OUT,
-	GPIO82_SSP2_FRM_OUT,
-	GPIO83_SSP2_TXD,
-
-	/* IrDA is managed in other way */
-	GPIO46_GPIO,
-	GPIO47_GPIO,
-};
-
-/*
- * SCOOP Device
- */
-static struct resource tosa_scoop_resources[] = {
-	[0] = {
-		.start	= TOSA_CF_PHYS,
-		.end	= TOSA_CF_PHYS + 0xfff,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct scoop_config tosa_scoop_setup = {
-	.io_dir 	= TOSA_SCOOP_IO_DIR,
-	.gpio_base	= TOSA_SCOOP_GPIO_BASE,
-};
-
-static struct platform_device tosascoop_device = {
-	.name		= "sharp-scoop",
-	.id		= 0,
-	.dev		= {
- 		.platform_data	= &tosa_scoop_setup,
-	},
-	.num_resources	= ARRAY_SIZE(tosa_scoop_resources),
-	.resource	= tosa_scoop_resources,
-};
-
-
-/*
- * SCOOP Device Jacket
- */
-static struct resource tosa_scoop_jc_resources[] = {
-	[0] = {
-		.start		= TOSA_SCOOP_PHYS + 0x40,
-		.end		= TOSA_SCOOP_PHYS + 0xfff,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct scoop_config tosa_scoop_jc_setup = {
-	.io_dir 	= TOSA_SCOOP_JC_IO_DIR,
-	.gpio_base	= TOSA_SCOOP_JC_GPIO_BASE,
-};
-
-static struct platform_device tosascoop_jc_device = {
-	.name		= "sharp-scoop",
-	.id		= 1,
-	.dev		= {
- 		.platform_data	= &tosa_scoop_jc_setup,
-		.parent 	= &tosascoop_device.dev,
-	},
-	.num_resources	= ARRAY_SIZE(tosa_scoop_jc_resources),
-	.resource	= tosa_scoop_jc_resources,
-};
-
-/*
- * PCMCIA
- */
-static struct scoop_pcmcia_dev tosa_pcmcia_scoop[] = {
-{
-	.dev        = &tosascoop_device.dev,
-	.irq        = TOSA_IRQ_GPIO_CF_IRQ,
-	.cd_irq     = TOSA_IRQ_GPIO_CF_CD,
-	.cd_irq_str = "PCMCIA0 CD",
-},{
-	.dev        = &tosascoop_jc_device.dev,
-	.irq        = TOSA_IRQ_GPIO_JC_CF_IRQ,
-	.cd_irq     = -1,
-},
-};
-
-static struct scoop_pcmcia_config tosa_pcmcia_config = {
-	.devs         = &tosa_pcmcia_scoop[0],
-	.num_devs     = 2,
-};
-
-/*
- * USB Device Controller
- */
-static struct gpio_vbus_mach_info tosa_udc_info = {
-	.gpio_pullup		= TOSA_GPIO_USB_PULLUP,
-	.gpio_vbus		= TOSA_GPIO_USB_IN,
-	.gpio_vbus_inverted	= 1,
-};
-
-static struct platform_device tosa_gpio_vbus = {
-	.name	= "gpio-vbus",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &tosa_udc_info,
-	},
-};
-
-/*
- * MMC/SD Device
- */
-static int tosa_mci_init(struct device *dev, irq_handler_t tosa_detect_int, void *data)
-{
-	int err;
-
-	err = gpio_request(TOSA_GPIO_nSD_INT, "SD Int");
-	if (err) {
-		printk(KERN_ERR "tosa_mci_init: can't request SD_PWR gpio\n");
-		goto err_gpio_int;
-	}
-	err = gpio_direction_input(TOSA_GPIO_nSD_INT);
-	if (err)
-		goto err_gpio_int_dir;
-
-	return 0;
-
-err_gpio_int_dir:
-	gpio_free(TOSA_GPIO_nSD_INT);
-err_gpio_int:
-	return err;
-}
-
-static void tosa_mci_exit(struct device *dev, void *data)
-{
-	gpio_free(TOSA_GPIO_nSD_INT);
-}
-
-static struct pxamci_platform_data tosa_mci_platform_data = {
-	.detect_delay_ms	= 250,
-	.ocr_mask       	= MMC_VDD_32_33|MMC_VDD_33_34,
-	.init           	= tosa_mci_init,
-	.exit           	= tosa_mci_exit,
-	.gpio_card_detect	= TOSA_GPIO_nSD_DETECT,
-	.gpio_card_ro		= TOSA_GPIO_SD_WP,
-	.gpio_power		= TOSA_GPIO_PWR_ON,
-};
-
-/*
- * Irda
- */
-static void tosa_irda_transceiver_mode(struct device *dev, int mode)
-{
-	if (mode & IR_OFF) {
-		gpio_set_value(TOSA_GPIO_IR_POWERDWN, 0);
-		pxa2xx_transceiver_mode(dev, mode);
-		gpio_direction_output(TOSA_GPIO_IRDA_TX, 0);
-	} else {
-		pxa2xx_transceiver_mode(dev, mode);
-		gpio_set_value(TOSA_GPIO_IR_POWERDWN, 1);
-	}
-}
-
-static int tosa_irda_startup(struct device *dev)
-{
-	int ret;
-
-	ret = gpio_request(TOSA_GPIO_IRDA_TX, "IrDA TX");
-	if (ret)
-		goto err_tx;
-	ret = gpio_direction_output(TOSA_GPIO_IRDA_TX, 0);
-	if (ret)
-		goto err_tx_dir;
-
-	ret = gpio_request(TOSA_GPIO_IR_POWERDWN, "IrDA powerdown");
-	if (ret)
-		goto err_pwr;
-
-	ret = gpio_direction_output(TOSA_GPIO_IR_POWERDWN, 0);
-	if (ret)
-		goto err_pwr_dir;
-
-	tosa_irda_transceiver_mode(dev, IR_SIRMODE | IR_OFF);
-
-	return 0;
-
-err_pwr_dir:
-	gpio_free(TOSA_GPIO_IR_POWERDWN);
-err_pwr:
-err_tx_dir:
-	gpio_free(TOSA_GPIO_IRDA_TX);
-err_tx:
-	return ret;
-}
-
-static void tosa_irda_shutdown(struct device *dev)
-{
-	tosa_irda_transceiver_mode(dev, IR_SIRMODE | IR_OFF);
-	gpio_free(TOSA_GPIO_IR_POWERDWN);
-	gpio_free(TOSA_GPIO_IRDA_TX);
-}
-
-static struct pxaficp_platform_data tosa_ficp_platform_data = {
-	.gpio_pwdown		= -1,
-	.transceiver_cap	= IR_SIRMODE | IR_OFF,
-	.transceiver_mode	= tosa_irda_transceiver_mode,
-	.startup		= tosa_irda_startup,
-	.shutdown		= tosa_irda_shutdown,
-};
-
-/*
- * Tosa AC IN
- */
-static int tosa_power_init(struct device *dev)
-{
-	int ret = gpio_request(TOSA_GPIO_AC_IN, "ac in");
-	if (ret)
-		goto err_gpio_req;
-
-	ret = gpio_direction_input(TOSA_GPIO_AC_IN);
-	if (ret)
-		goto err_gpio_in;
-
-	return 0;
-
-err_gpio_in:
-	gpio_free(TOSA_GPIO_AC_IN);
-err_gpio_req:
-	return ret;
-}
-
-static void tosa_power_exit(struct device *dev)
-{
-	gpio_free(TOSA_GPIO_AC_IN);
-}
-
-static int tosa_power_ac_online(void)
-{
-	return gpio_get_value(TOSA_GPIO_AC_IN) == 0;
-}
-
-static char *tosa_ac_supplied_to[] = {
-	"main-battery",
-	"backup-battery",
-	"jacket-battery",
-};
-
-static struct pda_power_pdata tosa_power_data = {
-	.init			= tosa_power_init,
-	.is_ac_online		= tosa_power_ac_online,
-	.exit			= tosa_power_exit,
-	.supplied_to		= tosa_ac_supplied_to,
-	.num_supplicants	= ARRAY_SIZE(tosa_ac_supplied_to),
-};
-
-static struct resource tosa_power_resource[] = {
-	{
-		.name		= "ac",
-		.start		= PXA_GPIO_TO_IRQ(TOSA_GPIO_AC_IN),
-		.end		= PXA_GPIO_TO_IRQ(TOSA_GPIO_AC_IN),
-		.flags		= IORESOURCE_IRQ |
-				  IORESOURCE_IRQ_HIGHEDGE |
-				  IORESOURCE_IRQ_LOWEDGE,
-	},
-};
-
-static struct platform_device tosa_power_device = {
-	.name			= "pda-power",
-	.id			= -1,
-	.dev.platform_data	= &tosa_power_data,
-	.resource		= tosa_power_resource,
-	.num_resources		= ARRAY_SIZE(tosa_power_resource),
-};
-
-/*
- * Tosa Keyboard
- */
-static const uint32_t tosakbd_keymap[] = {
-	KEY(0, 2, KEY_W),
-	KEY(0, 6, KEY_K),
-	KEY(0, 7, KEY_BACKSPACE),
-	KEY(0, 8, KEY_P),
-	KEY(1, 1, KEY_Q),
-	KEY(1, 2, KEY_E),
-	KEY(1, 3, KEY_T),
-	KEY(1, 4, KEY_Y),
-	KEY(1, 6, KEY_O),
-	KEY(1, 7, KEY_I),
-	KEY(1, 8, KEY_COMMA),
-	KEY(2, 1, KEY_A),
-	KEY(2, 2, KEY_D),
-	KEY(2, 3, KEY_G),
-	KEY(2, 4, KEY_U),
-	KEY(2, 6, KEY_L),
-	KEY(2, 7, KEY_ENTER),
-	KEY(2, 8, KEY_DOT),
-	KEY(3, 1, KEY_Z),
-	KEY(3, 2, KEY_C),
-	KEY(3, 3, KEY_V),
-	KEY(3, 4, KEY_J),
-	KEY(3, 5, TOSA_KEY_ADDRESSBOOK),
-	KEY(3, 6, TOSA_KEY_CANCEL),
-	KEY(3, 7, TOSA_KEY_CENTER),
-	KEY(3, 8, TOSA_KEY_OK),
-	KEY(3, 9, KEY_LEFTSHIFT),
-	KEY(4, 1, KEY_S),
-	KEY(4, 2, KEY_R),
-	KEY(4, 3, KEY_B),
-	KEY(4, 4, KEY_N),
-	KEY(4, 5, TOSA_KEY_CALENDAR),
-	KEY(4, 6, TOSA_KEY_HOMEPAGE),
-	KEY(4, 7, KEY_LEFTCTRL),
-	KEY(4, 8, TOSA_KEY_LIGHT),
-	KEY(4, 10, KEY_RIGHTSHIFT),
-	KEY(5, 1, KEY_TAB),
-	KEY(5, 2, KEY_SLASH),
-	KEY(5, 3, KEY_H),
-	KEY(5, 4, KEY_M),
-	KEY(5, 5, TOSA_KEY_MENU),
-	KEY(5, 7, KEY_UP),
-	KEY(5, 11, TOSA_KEY_FN),
-	KEY(6, 1, KEY_X),
-	KEY(6, 2, KEY_F),
-	KEY(6, 3, KEY_SPACE),
-	KEY(6, 4, KEY_APOSTROPHE),
-	KEY(6, 5, TOSA_KEY_MAIL),
-	KEY(6, 6, KEY_LEFT),
-	KEY(6, 7, KEY_DOWN),
-	KEY(6, 8, KEY_RIGHT),
-};
-
-static struct matrix_keymap_data tosakbd_keymap_data = {
-	.keymap		= tosakbd_keymap,
-	.keymap_size	= ARRAY_SIZE(tosakbd_keymap),
-};
-
-static const int tosakbd_col_gpios[] =
-			{ 58, 59, 60, 61, 62, 63, 64, 65, 66, 67, 68 };
-static const int tosakbd_row_gpios[] =
-			{ 69, 70, 71, 72, 73, 74, 75 };
-
-static struct matrix_keypad_platform_data tosakbd_pdata = {
-	.keymap_data		= &tosakbd_keymap_data,
-	.row_gpios		= tosakbd_row_gpios,
-	.col_gpios		= tosakbd_col_gpios,
-	.num_row_gpios		= ARRAY_SIZE(tosakbd_row_gpios),
-	.num_col_gpios		= ARRAY_SIZE(tosakbd_col_gpios),
-	.col_scan_delay_us	= 10,
-	.debounce_ms		= 10,
-	.wakeup			= 1,
-};
-
-static struct platform_device tosakbd_device = {
-	.name		= "matrix-keypad",
-	.id		= -1,
-	.dev		= {
-		.platform_data = &tosakbd_pdata,
-	},
-};
-
-static struct gpio_keys_button tosa_gpio_keys[] = {
-	/*
-	 * Two following keys are directly tied to "ON" button of tosa. Why?
-	 * The first one can be used as a wakeup source, the second can't;
-	 * also the first one is OR of ac_powered and on_button.
-	 */
-	{
-		.type	= EV_PWR,
-		.code	= KEY_RESERVED,
-		.gpio	= TOSA_GPIO_POWERON,
-		.desc	= "Poweron",
-		.wakeup	= 1,
-		.active_low = 1,
-	},
-	{
-		.type	= EV_PWR,
-		.code	= KEY_SUSPEND,
-		.gpio	= TOSA_GPIO_ON_KEY,
-		.desc	= "On key",
-		/*
-		 * can't be used as wakeup
-		 * .wakeup	= 1,
-		 */
-		.active_low = 1,
-	},
-	{
-		.type	= EV_KEY,
-		.code	= TOSA_KEY_RECORD,
-		.gpio	= TOSA_GPIO_RECORD_BTN,
-		.desc	= "Record Button",
-		.wakeup	= 1,
-		.active_low = 1,
-	},
-	{
-		.type	= EV_KEY,
-		.code	= TOSA_KEY_SYNC,
-		.gpio	= TOSA_GPIO_SYNC,
-		.desc	= "Sync Button",
-		.wakeup	= 1,
-		.active_low = 1,
-	},
-	{
-		.type	= EV_SW,
-		.code	= SW_HEADPHONE_INSERT,
-		.gpio	= TOSA_GPIO_EAR_IN,
-		.desc	= "HeadPhone insert",
-		.active_low = 1,
-		.debounce_interval = 300,
-	},
-};
-
-static struct gpio_keys_platform_data tosa_gpio_keys_platform_data = {
-	.buttons	= tosa_gpio_keys,
-	.nbuttons	= ARRAY_SIZE(tosa_gpio_keys),
-};
-
-static struct platform_device tosa_gpio_keys_device = {
-	.name	= "gpio-keys",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &tosa_gpio_keys_platform_data,
-	},
-};
-
-/*
- * Tosa LEDs
- */
-static struct gpio_led tosa_gpio_leds[] = {
-	{
-		.name			= "tosa:amber:charge",
-		.default_trigger	= "main-battery-charging",
-		.gpio			= TOSA_GPIO_CHRG_ERR_LED,
-	},
-	{
-		.name			= "tosa:green:mail",
-		.default_trigger	= "nand-disk",
-		.gpio			= TOSA_GPIO_NOTE_LED,
-	},
-	{
-		.name			= "tosa:dual:wlan",
-		.default_trigger	= "none",
-		.gpio			= TOSA_GPIO_WLAN_LED,
-	},
-	{
-		.name			= "tosa:blue:bluetooth",
-		.default_trigger	= "tosa-bt",
-		.gpio			= TOSA_GPIO_BT_LED,
-	},
-};
-
-static struct gpio_led_platform_data tosa_gpio_leds_platform_data = {
-	.leds		= tosa_gpio_leds,
-	.num_leds	= ARRAY_SIZE(tosa_gpio_leds),
-};
-
-static struct platform_device tosaled_device = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &tosa_gpio_leds_platform_data,
-	},
-};
-
-/*
- * Toshiba Mobile IO Controller
- */
-static struct resource tc6393xb_resources[] = {
-	[0] = {
-		.start	= TOSA_LCDC_PHYS,
-		.end	= TOSA_LCDC_PHYS + 0x3ffffff,
-		.flags	= IORESOURCE_MEM,
-	},
-
-	[1] = {
-		.start	= TOSA_IRQ_GPIO_TC6393XB_INT,
-		.end	= TOSA_IRQ_GPIO_TC6393XB_INT,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-
-static int tosa_tc6393xb_enable(struct platform_device *dev)
-{
-	int rc;
-
-	rc = gpio_request(TOSA_GPIO_TC6393XB_REST_IN, "tc6393xb #pclr");
-	if (rc)
-		goto err_req_pclr;
-	rc = gpio_request(TOSA_GPIO_TC6393XB_SUSPEND, "tc6393xb #suspend");
-	if (rc)
-		goto err_req_suspend;
-	rc = gpio_request(TOSA_GPIO_TC6393XB_L3V_ON, "tc6393xb l3v");
-	if (rc)
-		goto err_req_l3v;
-	rc = gpio_direction_output(TOSA_GPIO_TC6393XB_L3V_ON, 0);
-	if (rc)
-		goto err_dir_l3v;
-	rc = gpio_direction_output(TOSA_GPIO_TC6393XB_SUSPEND, 0);
-	if (rc)
-		goto err_dir_suspend;
-	rc = gpio_direction_output(TOSA_GPIO_TC6393XB_REST_IN, 0);
-	if (rc)
-		goto err_dir_pclr;
-
-	mdelay(1);
-
-	gpio_set_value(TOSA_GPIO_TC6393XB_SUSPEND, 1);
-
-	mdelay(10);
-
-	gpio_set_value(TOSA_GPIO_TC6393XB_REST_IN, 1);
-	gpio_set_value(TOSA_GPIO_TC6393XB_L3V_ON, 1);
-
-	return 0;
-err_dir_pclr:
-err_dir_suspend:
-err_dir_l3v:
-	gpio_free(TOSA_GPIO_TC6393XB_L3V_ON);
-err_req_l3v:
-	gpio_free(TOSA_GPIO_TC6393XB_SUSPEND);
-err_req_suspend:
-	gpio_free(TOSA_GPIO_TC6393XB_REST_IN);
-err_req_pclr:
-	return rc;
-}
-
-static int tosa_tc6393xb_disable(struct platform_device *dev)
-{
-	gpio_free(TOSA_GPIO_TC6393XB_L3V_ON);
-	gpio_free(TOSA_GPIO_TC6393XB_SUSPEND);
-	gpio_free(TOSA_GPIO_TC6393XB_REST_IN);
-
-	return 0;
-}
-
-static int tosa_tc6393xb_resume(struct platform_device *dev)
-{
-	gpio_set_value(TOSA_GPIO_TC6393XB_SUSPEND, 1);
-	mdelay(10);
-	gpio_set_value(TOSA_GPIO_TC6393XB_L3V_ON, 1);
-	mdelay(10);
-
-	return 0;
-}
-
-static int tosa_tc6393xb_suspend(struct platform_device *dev)
-{
-	gpio_set_value(TOSA_GPIO_TC6393XB_L3V_ON, 0);
-	gpio_set_value(TOSA_GPIO_TC6393XB_SUSPEND, 0);
-	return 0;
-}
-
-static struct mtd_partition tosa_nand_partition[] = {
-	{
-		.name	= "smf",
-		.offset	= 0,
-		.size	= 7 * 1024 * 1024,
-	},
-	{
-		.name	= "root",
-		.offset	= MTDPART_OFS_APPEND,
-		.size	= 28 * 1024 * 1024,
-	},
-	{
-		.name	= "home",
-		.offset	= MTDPART_OFS_APPEND,
-		.size	= MTDPART_SIZ_FULL,
-	},
-};
-
-static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
-
-static struct nand_bbt_descr tosa_tc6393xb_nand_bbt = {
-	.options	= 0,
-	.offs		= 4,
-	.len		= 2,
-	.pattern	= scan_ff_pattern
-};
-
-static struct tmio_nand_data tosa_tc6393xb_nand_config = {
-	.num_partitions	= ARRAY_SIZE(tosa_nand_partition),
-	.partition	= tosa_nand_partition,
-	.badblock_pattern = &tosa_tc6393xb_nand_bbt,
-};
-
-static int tosa_tc6393xb_setup(struct platform_device *dev)
-{
-	int rc;
-
-	rc = gpio_request(TOSA_GPIO_CARD_VCC_ON, "CARD_VCC_ON");
-	if (rc)
-		goto err_req;
-
-	rc = gpio_direction_output(TOSA_GPIO_CARD_VCC_ON, 1);
-	if (rc)
-		goto err_dir;
-
-	return rc;
-
-err_dir:
-	gpio_free(TOSA_GPIO_CARD_VCC_ON);
-err_req:
-	return rc;
-}
-
-static void tosa_tc6393xb_teardown(struct platform_device *dev)
-{
-	gpio_free(TOSA_GPIO_CARD_VCC_ON);
-}
-
-#ifdef CONFIG_MFD_TC6393XB
-static struct fb_videomode tosa_tc6393xb_lcd_mode[] = {
-	{
-		.xres = 480,
-		.yres = 640,
-		.pixclock = 0x002cdf00,/* PLL divisor */
-		.left_margin = 0x004c,
-		.right_margin = 0x005b,
-		.upper_margin = 0x0001,
-		.lower_margin = 0x000d,
-		.hsync_len = 0x0002,
-		.vsync_len = 0x0001,
-		.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-		.vmode = FB_VMODE_NONINTERLACED,
-	},{
-		.xres = 240,
-		.yres = 320,
-		.pixclock = 0x00e7f203,/* PLL divisor */
-		.left_margin = 0x0024,
-		.right_margin = 0x002f,
-		.upper_margin = 0x0001,
-		.lower_margin = 0x000d,
-		.hsync_len = 0x0002,
-		.vsync_len = 0x0001,
-		.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-		.vmode = FB_VMODE_NONINTERLACED,
-	}
-};
-
-static struct tmio_fb_data tosa_tc6393xb_fb_config = {
-	.lcd_set_power	= tc6393xb_lcd_set_power,
-	.lcd_mode	= tc6393xb_lcd_mode,
-	.num_modes	= ARRAY_SIZE(tosa_tc6393xb_lcd_mode),
-	.modes		= &tosa_tc6393xb_lcd_mode[0],
-	.height		= 82,
-	.width		= 60,
-};
-#endif
-
-static struct tc6393xb_platform_data tosa_tc6393xb_data = {
-	.scr_pll2cr	= 0x0cc1,
-	.scr_gper	= 0x3300,
-
-	.irq_base	= IRQ_BOARD_START,
-	.gpio_base	= TOSA_TC6393XB_GPIO_BASE,
-	.setup		= tosa_tc6393xb_setup,
-	.teardown	= tosa_tc6393xb_teardown,
-
-	.enable		= tosa_tc6393xb_enable,
-	.disable	= tosa_tc6393xb_disable,
-	.suspend	= tosa_tc6393xb_suspend,
-	.resume		= tosa_tc6393xb_resume,
-
-	.nand_data	= &tosa_tc6393xb_nand_config,
-#ifdef CONFIG_MFD_TC6393XB
-	.fb_data	= &tosa_tc6393xb_fb_config,
-#endif
-
-	.resume_restore = 1,
-};
-
-
-static struct platform_device tc6393xb_device = {
-	.name	= "tc6393xb",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &tosa_tc6393xb_data,
-	},
-	.num_resources	= ARRAY_SIZE(tc6393xb_resources),
-	.resource	= tc6393xb_resources,
-};
-
-static struct tosa_bt_data tosa_bt_data = {
-	.gpio_pwr	= TOSA_GPIO_BT_PWR_EN,
-	.gpio_reset	= TOSA_GPIO_BT_RESET,
-};
-
-static struct platform_device tosa_bt_device = {
-	.name	= "tosa-bt",
-	.id	= -1,
-	.dev.platform_data = &tosa_bt_data,
-};
-
-static struct pxa2xx_spi_master pxa_ssp_master_info = {
-	.num_chipselect	= 1,
-};
-
-static struct spi_board_info spi_board_info[] __initdata = {
-	{
-		.modalias	= "tosa-lcd",
-		// .platform_data
-		.max_speed_hz	= 28750,
-		.bus_num	= 2,
-		.chip_select	= 0,
-		.mode		= SPI_MODE_0,
-	},
-};
-
-static struct mtd_partition sharpsl_rom_parts[] = {
-	{
-		.name	="Boot PROM Filesystem",
-		.offset	= 0x00160000,
-		.size	= MTDPART_SIZ_FULL,
-	},
-};
-
-static struct physmap_flash_data sharpsl_rom_data = {
-	.width		= 2,
-	.nr_parts	= ARRAY_SIZE(sharpsl_rom_parts),
-	.parts		= sharpsl_rom_parts,
-};
-
-static struct resource sharpsl_rom_resources[] = {
-	{
-		.start	= 0x00000000,
-		.end	= 0x007fffff,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device sharpsl_rom_device = {
-	.name	= "physmap-flash",
-	.id	= -1,
-	.resource = sharpsl_rom_resources,
-	.num_resources = ARRAY_SIZE(sharpsl_rom_resources),
-	.dev.platform_data = &sharpsl_rom_data,
-};
-
-static struct platform_device wm9712_device = {
-	.name	= "wm9712-codec",
-	.id	= -1,
-};
-
-static struct platform_device tosa_audio_device = {
-	.name	= "tosa-audio",
-	.id	= -1,
-};
-
-static struct platform_device *devices[] __initdata = {
-	&tosascoop_device,
-	&tosascoop_jc_device,
-	&tc6393xb_device,
-	&tosa_power_device,
-	&tosakbd_device,
-	&tosa_gpio_keys_device,
-	&tosaled_device,
-	&tosa_bt_device,
-	&sharpsl_rom_device,
-	&wm9712_device,
-	&tosa_gpio_vbus,
-	&tosa_audio_device,
-};
-
-static void tosa_poweroff(void)
-{
-	pxa_restart('g', NULL);
-}
-
-static void tosa_restart(char mode, const char *cmd)
-{
-	uint32_t msc0 = __raw_readl(MSC0);
-
-	/* Bootloader magic for a reboot */
-	if((msc0 & 0xffff0000) == 0x7ff00000)
-		__raw_writel((msc0 & 0xffff) | 0x7ee00000, MSC0);
-
-	tosa_poweroff();
-}
-
-static void __init tosa_init(void)
-{
-	int dummy;
-
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(tosa_pin_config));
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	gpio_set_wake(MFP_PIN_GPIO1, 1);
-	/* We can't pass to gpio-keys since it will drop the Reset altfunc */
-
-	init_gpio_reset(TOSA_GPIO_ON_RESET, 0, 0);
-
-	pm_power_off = tosa_poweroff;
-
-	PCFR |= PCFR_OPDE;
-
-	/* enable batt_fault */
-	PMCR = 0x01;
-
-	dummy = gpiochip_reserve(TOSA_SCOOP_GPIO_BASE, 12);
-	dummy = gpiochip_reserve(TOSA_SCOOP_JC_GPIO_BASE, 12);
-	dummy = gpiochip_reserve(TOSA_TC6393XB_GPIO_BASE, 16);
-
-	pxa_set_mci_info(&tosa_mci_platform_data);
-	pxa_set_ficp_info(&tosa_ficp_platform_data);
-	pxa_set_i2c_info(NULL);
-	pxa_set_ac97_info(NULL);
-	platform_scoop_config = &tosa_pcmcia_config;
-
-	pxa2xx_set_spi_info(2, &pxa_ssp_master_info);
-	spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
-
-	clk_add_alias("CLK_CK3P6MI", tc6393xb_device.name, "GPIO11_CLK", NULL);
-
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-}
-
-static void __init fixup_tosa(struct tag *tags, char **cmdline,
-			      struct meminfo *mi)
-{
-	sharpsl_save_param();
-	mi->nr_banks=1;
-	mi->bank[0].start = 0xa0000000;
-	mi->bank[0].size = (64*1024*1024);
-}
-
-MACHINE_START(TOSA, "SHARP Tosa")
-	.restart_mode	= 'g',
-	.fixup          = fixup_tosa,
-	.map_io         = pxa25x_map_io,
-	.nr_irqs	= TOSA_NR_IRQS,
-	.init_irq       = pxa25x_init_irq,
-	.handle_irq       = pxa25x_handle_irq,
-	.init_machine   = tosa_init,
-	.timer          = &pxa_timer,
-	.restart	= tosa_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/trizeps4.c b/ANDROID_3.4.5/arch/arm/mach-pxa/trizeps4.c
deleted file mode 100644
index 2b6ac00b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/trizeps4.c
+++ /dev/null
@@ -1,578 +0,0 @@
-/*
- *  linux/arch/arm/mach-pxa/trizeps4.c
- *
- *  Support for the Keith und Koep Trizeps4 Module Platform.
- *
- *  Author:	Jürgen Schindele
- *  Created:	20 02, 2006
- *  Copyright:	Jürgen Schindele
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/export.h>
-#include <linux/sched.h>
-#include <linux/bitops.h>
-#include <linux/fb.h>
-#include <linux/ioport.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/dm9000.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/partitions.h>
-#include <linux/i2c/pxa-i2c.h>
-
-#include <asm/types.h>
-#include <asm/setup.h>
-#include <asm/memory.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-#include <asm/sizes.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/flash.h>
-
-#include <mach/pxa27x.h>
-#include <mach/trizeps4.h>
-#include <mach/audio.h>
-#include <mach/pxafb.h>
-#include <mach/mmc.h>
-#include <mach/irda.h>
-#include <mach/ohci.h>
-#include <mach/smemc.h>
-
-#include "generic.h"
-#include "devices.h"
-
-/*	comment out the following line if you want to use the
- *	Standard UART from PXA for serial / irda transmission
- *	and acivate it if you have status leds connected */
-#define STATUS_LEDS_ON_STUART_PINS 1
-
-/*****************************************************************************
- * MultiFunctionPins of CPU
- *****************************************************************************/
-static unsigned long trizeps4_pin_config[] __initdata = {
-	/* Chip Selects */
-	GPIO15_nCS_1,		/* DiskOnChip CS */
-	GPIO93_GPIO,		/* TRIZEPS4_DOC_IRQ */
-	GPIO94_GPIO,		/* DOC lock */
-
-	GPIO78_nCS_2,		/* DM9000 CS */
-	GPIO101_GPIO,		/* TRIZEPS4_ETH_IRQ */
-
-	GPIO79_nCS_3,		/* Logic CS */
-	GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,	/* Logic irq */
-
-	/* AC97 */
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-
-	/* LCD - 16bpp Active TFT */
-	GPIOxx_LCD_TFT_16BPP,
-
-	/* UART */
-	GPIO9_FFUART_CTS,
-	GPIO10_FFUART_DCD,
-	GPIO16_FFUART_TXD,
-	GPIO33_FFUART_DSR,
-	GPIO38_FFUART_RI,
-	GPIO82_FFUART_DTR,
-	GPIO83_FFUART_RTS,
-	GPIO96_FFUART_RXD,
-
-	GPIO42_BTUART_RXD,
-	GPIO43_BTUART_TXD,
-	GPIO44_BTUART_CTS,
-	GPIO45_BTUART_RTS,
-#ifdef STATUS_LEDS_ON_STUART_PINS
-	GPIO46_GPIO,
-	GPIO47_GPIO,
-#else
-	GPIO46_STUART_RXD,
-	GPIO47_STUART_TXD,
-#endif
-	/* PCMCIA */
-	GPIO11_GPIO,			/* TRIZEPS4_CD_IRQ */
-	GPIO13_GPIO,			/* TRIZEPS4_READY_NINT */
-	GPIO48_nPOE,
-	GPIO49_nPWE,
-	GPIO50_nPIOR,
-	GPIO51_nPIOW,
-	GPIO54_nPCE_2,
-	GPIO55_nPREG,
-	GPIO56_nPWAIT,
-	GPIO57_nIOIS16,
-	GPIO102_nPCE_1,
-	GPIO104_PSKTSEL,
-
-	/* MultiMediaCard */
-	GPIO32_MMC_CLK,
-	GPIO92_MMC_DAT_0,
-	GPIO109_MMC_DAT_1,
-	GPIO110_MMC_DAT_2,
-	GPIO111_MMC_DAT_3,
-	GPIO112_MMC_CMD,
-	GPIO12_GPIO,			/* TRIZEPS4_MMC_IRQ */
-
-	/* USB OHCI */
-	GPIO88_USBH1_PWR,		/* USBHPWR1 */
-	GPIO89_USBH1_PEN,		/* USBHPEN1 */
-
-	/* I2C */
-	GPIO117_I2C_SCL,
-	GPIO118_I2C_SDA,
-};
-
-static unsigned long trizeps4wl_pin_config[] __initdata = {
-	/* SSP 2 */
-	GPIO14_SSP2_SFRM,
-	GPIO19_SSP2_SCLK,
-	GPIO53_GPIO,			/* TRIZEPS4_SPI_IRQ */
-	GPIO86_SSP2_RXD,
-	GPIO87_SSP2_TXD,
-};
-
-/****************************************************************************
- * ONBOARD FLASH
- ****************************************************************************/
-static struct mtd_partition trizeps4_partitions[] = {
-	{
-		.name =		"Bootloader",
-		.offset =	0x00000000,
-		.size =		0x00040000,
-		.mask_flags =	MTD_WRITEABLE  /* force read-only */
-	}, {
-		.name =		"Backup",
-		.offset =	0x00040000,
-		.size =		0x00040000,
-	}, {
-		.name =		"Image",
-		.offset =	0x00080000,
-		.size =		0x01080000,
-	}, {
-		.name =		"IPSM",
-		.offset =	0x01100000,
-		.size =		0x00e00000,
-	}, {
-		.name =		"Registry",
-		.offset =	0x01f00000,
-		.size =		MTDPART_SIZ_FULL,
-	}
-};
-
-static struct physmap_flash_data trizeps4_flash_data[] = {
-	{
-		.width		= 4,			/* bankwidth in bytes */
-		.parts		= trizeps4_partitions,
-		.nr_parts	= ARRAY_SIZE(trizeps4_partitions)
-	}
-};
-
-static struct resource flash_resource = {
-	.start	= PXA_CS0_PHYS,
-	.end	= PXA_CS0_PHYS + SZ_32M - 1,
-	.flags	= IORESOURCE_MEM,
-};
-
-static struct platform_device flash_device = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev = {
-		.platform_data = trizeps4_flash_data,
-	},
-	.resource = &flash_resource,
-	.num_resources = 1,
-};
-
-/****************************************************************************
- * DAVICOM DM9000 Ethernet
- ****************************************************************************/
-static struct resource dm9000_resources[] = {
-	[0] = {
-		.start	= TRIZEPS4_ETH_PHYS+0x300,
-		.end	= TRIZEPS4_ETH_PHYS+0x400-1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= TRIZEPS4_ETH_PHYS+0x8300,
-		.end	= TRIZEPS4_ETH_PHYS+0x8400-1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[2] = {
-		.start	= TRIZEPS4_ETH_IRQ,
-		.end	= TRIZEPS4_ETH_IRQ,
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	},
-};
-
-static struct dm9000_plat_data tri_dm9000_platdata = {
-	.flags		= DM9000_PLATF_32BITONLY,
-};
-
-static struct platform_device dm9000_device = {
-	.name		= "dm9000",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(dm9000_resources),
-	.resource	= dm9000_resources,
-	.dev		= {
-		.platform_data = &tri_dm9000_platdata,
-	}
-};
-
-/****************************************************************************
- * LED's on GPIO pins of PXA
- ****************************************************************************/
-static struct gpio_led trizeps4_led[] = {
-#ifdef STATUS_LEDS_ON_STUART_PINS
-	{
-		.name = "led0:orange:heartbeat",	/* */
-		.default_trigger = "heartbeat",
-		.gpio = GPIO_HEARTBEAT_LED,
-		.active_low = 1,
-	},
-	{
-		.name = "led1:yellow:cpubusy",		/* */
-		.default_trigger = "cpu-busy",
-		.gpio = GPIO_SYS_BUSY_LED,
-		.active_low = 1,
-	},
-#endif
-};
-
-static struct gpio_led_platform_data trizeps4_led_data = {
-	.leds		= trizeps4_led,
-	.num_leds	= ARRAY_SIZE(trizeps4_led),
-};
-
-static struct platform_device leds_devices = {
-	.name		= "leds-gpio",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &trizeps4_led_data,
-	},
-};
-
-static struct platform_device *trizeps4_devices[] __initdata = {
-	&flash_device,
-	&dm9000_device,
-	&leds_devices,
-};
-
-static struct platform_device *trizeps4wl_devices[] __initdata = {
-	&flash_device,
-	&leds_devices,
-};
-
-static short trizeps_conxs_bcr;
-
-/* PCCARD power switching supports only 3,3V */
-void board_pcmcia_power(int power)
-{
-	if (power) {
-		/* switch power on, put in reset and enable buffers */
-		trizeps_conxs_bcr |= power;
-		trizeps_conxs_bcr |= ConXS_BCR_CF_RESET;
-		trizeps_conxs_bcr &= ~ConXS_BCR_CF_BUF_EN;
-		BCR_writew(trizeps_conxs_bcr);
-		/* wait a little */
-		udelay(2000);
-		/* take reset away */
-		trizeps_conxs_bcr &= ~ConXS_BCR_CF_RESET;
-		BCR_writew(trizeps_conxs_bcr);
-		udelay(2000);
-	} else {
-		/* put in reset */
-		trizeps_conxs_bcr |= ConXS_BCR_CF_RESET;
-		BCR_writew(trizeps_conxs_bcr);
-		udelay(1000);
-		/* switch power off */
-		trizeps_conxs_bcr &= ~0xf;
-		BCR_writew(trizeps_conxs_bcr);
-	}
-	pr_debug("%s: o%s 0x%x\n", __func__, power ? "n" : "ff",
-			trizeps_conxs_bcr);
-}
-EXPORT_SYMBOL(board_pcmcia_power);
-
-/* backlight power switching for LCD panel */
-static void board_backlight_power(int on)
-{
-	if (on)
-		trizeps_conxs_bcr |= ConXS_BCR_L_DISP;
-	else
-		trizeps_conxs_bcr &= ~ConXS_BCR_L_DISP;
-
-	pr_debug("%s: o%s 0x%x\n", __func__, on ? "n" : "ff",
-			trizeps_conxs_bcr);
-	BCR_writew(trizeps_conxs_bcr);
-}
-
-/* a I2C based RTC is known on CONXS board */
-static struct i2c_board_info trizeps4_i2c_devices[] __initdata = {
-	{ I2C_BOARD_INFO("rtc-pcf8593", 0x51) }
-};
-
-/****************************************************************************
- * MMC card slot external to module
- ****************************************************************************/
-static int trizeps4_mci_init(struct device *dev, irq_handler_t mci_detect_int,
-		void *data)
-{
-	int err;
-
-	err = request_irq(TRIZEPS4_MMC_IRQ, mci_detect_int,
-		IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_SAMPLE_RANDOM,
-		"MMC card detect", data);
-	if (err) {
-		printk(KERN_ERR "trizeps4_mci_init: MMC/SD: can't request"
-						"MMC card detect IRQ\n");
-		return -1;
-	}
-	return 0;
-}
-
-static void trizeps4_mci_exit(struct device *dev, void *data)
-{
-	free_irq(TRIZEPS4_MMC_IRQ, data);
-}
-
-static struct pxamci_platform_data trizeps4_mci_platform_data = {
-	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
-	.detect_delay_ms= 10,
-	.init 		= trizeps4_mci_init,
-	.exit		= trizeps4_mci_exit,
-	.get_ro		= NULL,	/* write-protection not supported */
-	.setpower 	= NULL,	/* power-switching not supported */
-	.gpio_card_detect = -1,
-	.gpio_card_ro	= -1,
-	.gpio_power	= -1,
-};
-
-/****************************************************************************
- * IRDA mode switching on stuart
- ****************************************************************************/
-#ifndef STATUS_LEDS_ON_STUART_PINS
-static short trizeps_conxs_ircr;
-
-static int trizeps4_irda_startup(struct device *dev)
-{
-	trizeps_conxs_ircr &= ~ConXS_IRCR_SD;
-	IRCR_writew(trizeps_conxs_ircr);
-	return 0;
-}
-
-static void trizeps4_irda_shutdown(struct device *dev)
-{
-	trizeps_conxs_ircr |= ConXS_IRCR_SD;
-	IRCR_writew(trizeps_conxs_ircr);
-}
-
-static void trizeps4_irda_transceiver_mode(struct device *dev, int mode)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-	/* Switch mode */
-	if (mode & IR_SIRMODE)
-		trizeps_conxs_ircr &= ~ConXS_IRCR_MODE;	/* Slow mode */
-	else if (mode & IR_FIRMODE)
-		trizeps_conxs_ircr |= ConXS_IRCR_MODE;	/* Fast mode */
-
-	/* Switch power */
-	if (mode & IR_OFF)
-		trizeps_conxs_ircr |= ConXS_IRCR_SD;
-	else
-		trizeps_conxs_ircr &= ~ConXS_IRCR_SD;
-
-	IRCR_writew(trizeps_conxs_ircr);
-	local_irq_restore(flags);
-
-	pxa2xx_transceiver_mode(dev, mode);
-}
-
-static struct pxaficp_platform_data trizeps4_ficp_platform_data = {
-	.gpio_pwdown		= -1,
-	.transceiver_cap	= IR_SIRMODE | IR_FIRMODE | IR_OFF,
-	.transceiver_mode	= trizeps4_irda_transceiver_mode,
-	.startup		= trizeps4_irda_startup,
-	.shutdown		= trizeps4_irda_shutdown,
-};
-#endif
-
-/****************************************************************************
- * OHCI USB port
- ****************************************************************************/
-static struct pxaohci_platform_data trizeps4_ohci_platform_data = {
-	.port_mode	= PMM_PERPORT_MODE,
-	.flags		= ENABLE_PORT_ALL | POWER_CONTROL_LOW | POWER_SENSE_LOW,
-};
-
-static struct map_desc trizeps4_io_desc[] __initdata = {
-	{ 	/* ConXS CFSR */
-		.virtual	= TRIZEPS4_CFSR_VIRT,
-		.pfn		= __phys_to_pfn(TRIZEPS4_CFSR_PHYS),
-		.length		= 0x00001000,
-		.type		= MT_DEVICE
-	},
-	{	/* ConXS BCR */
-		.virtual	= TRIZEPS4_BOCR_VIRT,
-		.pfn		= __phys_to_pfn(TRIZEPS4_BOCR_PHYS),
-		.length		= 0x00001000,
-		.type		= MT_DEVICE
-	},
-	{ 	/* ConXS IRCR */
-		.virtual	= TRIZEPS4_IRCR_VIRT,
-		.pfn		= __phys_to_pfn(TRIZEPS4_IRCR_PHYS),
-		.length		= 0x00001000,
-		.type		= MT_DEVICE
-	},
-	{	/* ConXS DCR */
-		.virtual	= TRIZEPS4_DICR_VIRT,
-		.pfn		= __phys_to_pfn(TRIZEPS4_DICR_PHYS),
-		.length		= 0x00001000,
-		.type		= MT_DEVICE
-	},
-	{	/* ConXS UPSR */
-		.virtual	= TRIZEPS4_UPSR_VIRT,
-		.pfn		= __phys_to_pfn(TRIZEPS4_UPSR_PHYS),
-		.length		= 0x00001000,
-		.type		= MT_DEVICE
-	}
-};
-
-static struct pxafb_mode_info sharp_lcd_mode = {
-	.pixclock	= 78000,
-	.xres		= 640,
-	.yres		= 480,
-	.bpp		= 8,
-	.hsync_len	= 4,
-	.left_margin	= 4,
-	.right_margin	= 4,
-	.vsync_len	= 2,
-	.upper_margin	= 0,
-	.lower_margin	= 0,
-	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-	.cmap_greyscale	= 0,
-};
-
-static struct pxafb_mach_info sharp_lcd = {
-	.modes		= &sharp_lcd_mode,
-	.num_modes	= 1,
-	.lcd_conn	= LCD_COLOR_DSTN_16BPP | LCD_PCLK_EDGE_FALL,
-	.cmap_inverse	= 0,
-	.cmap_static	= 0,
-	.pxafb_backlight_power = board_backlight_power,
-};
-
-static struct pxafb_mode_info toshiba_lcd_mode = {
-	.pixclock	= 39720,
-	.xres		= 640,
-	.yres		= 480,
-	.bpp		= 8,
-	.hsync_len	= 63,
-	.left_margin	= 12,
-	.right_margin	= 12,
-	.vsync_len	= 4,
-	.upper_margin	= 32,
-	.lower_margin	= 10,
-	.sync		= 0,
-	.cmap_greyscale	= 0,
-};
-
-static struct pxafb_mach_info toshiba_lcd = {
-	.modes		= &toshiba_lcd_mode,
-	.num_modes	= 1,
-	.lcd_conn	= (LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL),
-	.cmap_inverse	= 0,
-	.cmap_static	= 0,
-	.pxafb_backlight_power = board_backlight_power,
-};
-
-static void __init trizeps4_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(trizeps4_pin_config));
-	if (machine_is_trizeps4wl()) {
-		pxa2xx_mfp_config(ARRAY_AND_SIZE(trizeps4wl_pin_config));
-		platform_add_devices(trizeps4wl_devices,
-					ARRAY_SIZE(trizeps4wl_devices));
-	} else {
-		platform_add_devices(trizeps4_devices,
-					ARRAY_SIZE(trizeps4_devices));
-	}
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	if (0)	/* dont know how to determine LCD */
-		pxa_set_fb_info(NULL, &sharp_lcd);
-	else
-		pxa_set_fb_info(NULL, &toshiba_lcd);
-
-	pxa_set_mci_info(&trizeps4_mci_platform_data);
-#ifndef STATUS_LEDS_ON_STUART_PINS
-	pxa_set_ficp_info(&trizeps4_ficp_platform_data);
-#endif
-	pxa_set_ohci_info(&trizeps4_ohci_platform_data);
-	pxa_set_ac97_info(NULL);
-	pxa_set_i2c_info(NULL);
-	i2c_register_board_info(0, trizeps4_i2c_devices,
-					ARRAY_SIZE(trizeps4_i2c_devices));
-
-	/* this is the reset value */
-	trizeps_conxs_bcr = 0x00A0;
-
-	BCR_writew(trizeps_conxs_bcr);
-	board_backlight_power(1);
-}
-
-static void __init trizeps4_map_io(void)
-{
-	pxa27x_map_io();
-	iotable_init(trizeps4_io_desc, ARRAY_SIZE(trizeps4_io_desc));
-
-	if ((__raw_readl(MSC0) & 0x8) && (__raw_readl(BOOT_DEF) & 0x1)) {
-		/* if flash is 16 bit wide its a Trizeps4 WL */
-		__machine_arch_type = MACH_TYPE_TRIZEPS4WL;
-		trizeps4_flash_data[0].width = 2;
-	} else {
-		/* if flash is 32 bit wide its a Trizeps4 */
-		__machine_arch_type = MACH_TYPE_TRIZEPS4;
-		trizeps4_flash_data[0].width = 4;
-	}
-}
-
-MACHINE_START(TRIZEPS4, "Keith und Koep Trizeps IV module")
-	/* MAINTAINER("Jürgen Schindele") */
-	.atag_offset	= 0x100,
-	.init_machine	= trizeps4_init,
-	.map_io		= trizeps4_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa27x_init_irq,
-	.handle_irq	= pxa27x_handle_irq,
-	.timer		= &pxa_timer,
-	.restart	= pxa_restart,
-MACHINE_END
-
-MACHINE_START(TRIZEPS4WL, "Keith und Koep Trizeps IV-WL module")
-	/* MAINTAINER("Jürgen Schindele") */
-	.atag_offset	= 0x100,
-	.init_machine	= trizeps4_init,
-	.map_io		= trizeps4_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa27x_init_irq,
-	.handle_irq	= pxa27x_handle_irq,
-	.timer		= &pxa_timer,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/viper.c b/ANDROID_3.4.5/arch/arm/mach-pxa/viper.c
deleted file mode 100644
index 130379fb..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/viper.c
+++ /dev/null
@@ -1,1004 +0,0 @@
-/*
- *  linux/arch/arm/mach-pxa/viper.c
- *
- *  Support for the Arcom VIPER SBC.
- *
- *  Author:	Ian Campbell
- *  Created:    Feb 03, 2003
- *  Copyright:  Arcom Control Systems
- *
- *  Maintained by Marc Zyngier <maz@misterjones.org>
- *                             <marc.zyngier@altran.com>
- *
- * Based on lubbock.c:
- *  Author:	Nicolas Pitre
- *  Created:	Jun 15, 2001
- *  Copyright:	MontaVista Software Inc.
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#include <linux/types.h>
-#include <linux/memory.h>
-#include <linux/cpu.h>
-#include <linux/cpufreq.h>
-#include <linux/delay.h>
-#include <linux/fs.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/interrupt.h>
-#include <linux/major.h>
-#include <linux/module.h>
-#include <linux/pm.h>
-#include <linux/sched.h>
-#include <linux/gpio.h>
-#include <linux/jiffies.h>
-#include <linux/i2c-gpio.h>
-#include <linux/i2c/pxa-i2c.h>
-#include <linux/serial_8250.h>
-#include <linux/smc91x.h>
-#include <linux/pwm_backlight.h>
-#include <linux/usb/isp116x.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/syscore_ops.h>
-
-#include <mach/pxa25x.h>
-#include <mach/audio.h>
-#include <mach/pxafb.h>
-#include <mach/regs-uart.h>
-#include <mach/arcom-pcmcia.h>
-#include <mach/viper.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-#include <asm/sizes.h>
-#include <asm/system_info.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include "generic.h"
-#include "devices.h"
-
-static unsigned int icr;
-
-static void viper_icr_set_bit(unsigned int bit)
-{
-	icr |= bit;
-	VIPER_ICR = icr;
-}
-
-static void viper_icr_clear_bit(unsigned int bit)
-{
-	icr &= ~bit;
-	VIPER_ICR = icr;
-}
-
-/* This function is used from the pcmcia module to reset the CF */
-static void viper_cf_reset(int state)
-{
-	if (state)
-		viper_icr_set_bit(VIPER_ICR_CF_RST);
-	else
-		viper_icr_clear_bit(VIPER_ICR_CF_RST);
-}
-
-static struct arcom_pcmcia_pdata viper_pcmcia_info = {
-	.cd_gpio	= VIPER_CF_CD_GPIO,
-	.rdy_gpio	= VIPER_CF_RDY_GPIO,
-	.pwr_gpio	= VIPER_CF_POWER_GPIO,
-	.reset		= viper_cf_reset,
-};
-
-static struct platform_device viper_pcmcia_device = {
-	.name		= "viper-pcmcia",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &viper_pcmcia_info,
-	},
-};
-
-/*
- * The CPLD version register was not present on VIPER boards prior to
- * v2i1. On v1 boards where the version register is not present we
- * will just read back the previous value from the databus.
- *
- * Therefore we do two reads. The first time we write 0 to the
- * (read-only) register before reading and the second time we write
- * 0xff first. If the two reads do not match or they read back as 0xff
- * or 0x00 then we have version 1 hardware.
- */
-static u8 viper_hw_version(void)
-{
-	u8 v1, v2;
-	unsigned long flags;
-
-	local_irq_save(flags);
-
-	VIPER_VERSION = 0;
-	v1 = VIPER_VERSION;
-	VIPER_VERSION = 0xff;
-	v2 = VIPER_VERSION;
-
-	v1 = (v1 != v2 || v1 == 0xff) ? 0 : v1;
-
-	local_irq_restore(flags);
-	return v1;
-}
-
-/* CPU system core operations. */
-static int viper_cpu_suspend(void)
-{
-	viper_icr_set_bit(VIPER_ICR_R_DIS);
-	return 0;
-}
-
-static void viper_cpu_resume(void)
-{
-	viper_icr_clear_bit(VIPER_ICR_R_DIS);
-}
-
-static struct syscore_ops viper_cpu_syscore_ops = {
-	.suspend	= viper_cpu_suspend,
-	.resume		= viper_cpu_resume,
-};
-
-static unsigned int current_voltage_divisor;
-
-/*
- * If force is not true then step from existing to new divisor. If
- * force is true then jump straight to the new divisor. Stepping is
- * used because if the jump in voltage is too large, the VCC can dip
- * too low and the regulator cuts out.
- *
- * force can be used to initialize the divisor to a know state by
- * setting the value for the current clock speed, since we are already
- * running at that speed we know the voltage should be pretty close so
- * the jump won't be too large
- */
-static void viper_set_core_cpu_voltage(unsigned long khz, int force)
-{
-	int i = 0;
-	unsigned int divisor = 0;
-	const char *v;
-
-	if (khz < 200000) {
-		v = "1.0"; divisor = 0xfff;
-	} else if (khz < 300000) {
-		v = "1.1"; divisor = 0xde5;
-	} else {
-		v = "1.3"; divisor = 0x325;
-	}
-
-	pr_debug("viper: setting CPU core voltage to %sV at %d.%03dMHz\n",
-		 v, (int)khz / 1000, (int)khz % 1000);
-
-#define STEP 0x100
-	do {
-		int step;
-
-		if (force)
-			step = divisor;
-		else if (current_voltage_divisor < divisor - STEP)
-			step = current_voltage_divisor + STEP;
-		else if (current_voltage_divisor > divisor + STEP)
-			step = current_voltage_divisor - STEP;
-		else
-			step = divisor;
-		force = 0;
-
-		gpio_set_value(VIPER_PSU_CLK_GPIO, 0);
-		gpio_set_value(VIPER_PSU_nCS_LD_GPIO, 0);
-
-		for (i = 1 << 11 ; i > 0 ; i >>= 1) {
-			udelay(1);
-
-			gpio_set_value(VIPER_PSU_DATA_GPIO, step & i);
-			udelay(1);
-
-			gpio_set_value(VIPER_PSU_CLK_GPIO, 1);
-			udelay(1);
-
-			gpio_set_value(VIPER_PSU_CLK_GPIO, 0);
-		}
-		udelay(1);
-
-		gpio_set_value(VIPER_PSU_nCS_LD_GPIO, 1);
-		udelay(1);
-
-		gpio_set_value(VIPER_PSU_nCS_LD_GPIO, 0);
-
-		current_voltage_divisor = step;
-	} while (current_voltage_divisor != divisor);
-}
-
-/* Interrupt handling */
-static unsigned long viper_irq_enabled_mask;
-static const int viper_isa_irqs[] = { 3, 4, 5, 6, 7, 10, 11, 12, 9, 14, 15 };
-static const int viper_isa_irq_map[] = {
-	0,		/* ISA irq #0, invalid */
-	0,		/* ISA irq #1, invalid */
-	0,		/* ISA irq #2, invalid */
-	1 << 0,		/* ISA irq #3 */
-	1 << 1,		/* ISA irq #4 */
-	1 << 2,		/* ISA irq #5 */
-	1 << 3,		/* ISA irq #6 */
-	1 << 4,		/* ISA irq #7 */
-	0,		/* ISA irq #8, invalid */
-	1 << 8,		/* ISA irq #9 */
-	1 << 5,		/* ISA irq #10 */
-	1 << 6,		/* ISA irq #11 */
-	1 << 7,		/* ISA irq #12 */
-	0,		/* ISA irq #13, invalid */
-	1 << 9,		/* ISA irq #14 */
-	1 << 10,	/* ISA irq #15 */
-};
-
-static inline int viper_irq_to_bitmask(unsigned int irq)
-{
-	return viper_isa_irq_map[irq - PXA_ISA_IRQ(0)];
-}
-
-static inline int viper_bit_to_irq(int bit)
-{
-	return viper_isa_irqs[bit] + PXA_ISA_IRQ(0);
-}
-
-static void viper_ack_irq(struct irq_data *d)
-{
-	int viper_irq = viper_irq_to_bitmask(d->irq);
-
-	if (viper_irq & 0xff)
-		VIPER_LO_IRQ_STATUS = viper_irq;
-	else
-		VIPER_HI_IRQ_STATUS = (viper_irq >> 8);
-}
-
-static void viper_mask_irq(struct irq_data *d)
-{
-	viper_irq_enabled_mask &= ~(viper_irq_to_bitmask(d->irq));
-}
-
-static void viper_unmask_irq(struct irq_data *d)
-{
-	viper_irq_enabled_mask |= viper_irq_to_bitmask(d->irq);
-}
-
-static inline unsigned long viper_irq_pending(void)
-{
-	return (VIPER_HI_IRQ_STATUS << 8 | VIPER_LO_IRQ_STATUS) &
-			viper_irq_enabled_mask;
-}
-
-static void viper_irq_handler(unsigned int irq, struct irq_desc *desc)
-{
-	unsigned long pending;
-
-	pending = viper_irq_pending();
-	do {
-		/* we're in a chained irq handler,
-		 * so ack the interrupt by hand */
-		desc->irq_data.chip->irq_ack(&desc->irq_data);
-
-		if (likely(pending)) {
-			irq = viper_bit_to_irq(__ffs(pending));
-			generic_handle_irq(irq);
-		}
-		pending = viper_irq_pending();
-	} while (pending);
-}
-
-static struct irq_chip viper_irq_chip = {
-	.name		= "ISA",
-	.irq_ack	= viper_ack_irq,
-	.irq_mask	= viper_mask_irq,
-	.irq_unmask	= viper_unmask_irq
-};
-
-static void __init viper_init_irq(void)
-{
-	int level;
-	int isa_irq;
-
-	pxa25x_init_irq();
-
-	/* setup ISA IRQs */
-	for (level = 0; level < ARRAY_SIZE(viper_isa_irqs); level++) {
-		isa_irq = viper_bit_to_irq(level);
-		irq_set_chip_and_handler(isa_irq, &viper_irq_chip,
-					 handle_edge_irq);
-		set_irq_flags(isa_irq, IRQF_VALID | IRQF_PROBE);
-	}
-
-	irq_set_chained_handler(gpio_to_irq(VIPER_CPLD_GPIO),
-				viper_irq_handler);
-	irq_set_irq_type(gpio_to_irq(VIPER_CPLD_GPIO), IRQ_TYPE_EDGE_BOTH);
-}
-
-/* Flat Panel */
-static struct pxafb_mode_info fb_mode_info[] = {
-	{
-		.pixclock	= 157500,
-
-		.xres		= 320,
-		.yres		= 240,
-
-		.bpp		= 16,
-
-		.hsync_len	= 63,
-		.left_margin	= 7,
-		.right_margin	= 13,
-
-		.vsync_len	= 20,
-		.upper_margin	= 0,
-		.lower_margin	= 0,
-
-		.sync		= 0,
-	},
-};
-
-static struct pxafb_mach_info fb_info = {
-	.modes			= fb_mode_info,
-	.num_modes		= 1,
-	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
-};
-
-static int viper_backlight_init(struct device *dev)
-{
-	int ret;
-
-	/* GPIO9 and 10 control FB backlight. Initialise to off */
-	ret = gpio_request(VIPER_BCKLIGHT_EN_GPIO, "Backlight");
-	if (ret)
-		goto err_request_bckl;
-
-	ret = gpio_request(VIPER_LCD_EN_GPIO, "LCD");
-	if (ret)
-		goto err_request_lcd;
-
-	ret = gpio_direction_output(VIPER_BCKLIGHT_EN_GPIO, 0);
-	if (ret)
-		goto err_dir;
-
-	ret = gpio_direction_output(VIPER_LCD_EN_GPIO, 0);
-	if (ret)
-		goto err_dir;
-
-	return 0;
-
-err_dir:
-	gpio_free(VIPER_LCD_EN_GPIO);
-err_request_lcd:
-	gpio_free(VIPER_BCKLIGHT_EN_GPIO);
-err_request_bckl:
-	dev_err(dev, "Failed to setup LCD GPIOs\n");
-
-	return ret;
-}
-
-static int viper_backlight_notify(struct device *dev, int brightness)
-{
-	gpio_set_value(VIPER_LCD_EN_GPIO, !!brightness);
-	gpio_set_value(VIPER_BCKLIGHT_EN_GPIO, !!brightness);
-
-	return brightness;
-}
-
-static void viper_backlight_exit(struct device *dev)
-{
-	gpio_free(VIPER_LCD_EN_GPIO);
-	gpio_free(VIPER_BCKLIGHT_EN_GPIO);
-}
-
-static struct platform_pwm_backlight_data viper_backlight_data = {
-	.pwm_id		= 0,
-	.max_brightness	= 100,
-	.dft_brightness	= 100,
-	.pwm_period_ns	= 1000000,
-	.init		= viper_backlight_init,
-	.notify		= viper_backlight_notify,
-	.exit		= viper_backlight_exit,
-};
-
-static struct platform_device viper_backlight_device = {
-	.name		= "pwm-backlight",
-	.dev		= {
-		.parent		= &pxa25x_device_pwm0.dev,
-		.platform_data	= &viper_backlight_data,
-	},
-};
-
-/* Ethernet */
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.name	= "smc91x-regs",
-		.start  = VIPER_ETH_PHYS + 0x300,
-		.end    = VIPER_ETH_PHYS + 0x30f,
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = PXA_GPIO_TO_IRQ(VIPER_ETH_GPIO),
-		.end    = PXA_GPIO_TO_IRQ(VIPER_ETH_GPIO),
-		.flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	},
-	[2] = {
-		.name	= "smc91x-data32",
-		.start  = VIPER_ETH_DATA_PHYS,
-		.end    = VIPER_ETH_DATA_PHYS + 3,
-		.flags  = IORESOURCE_MEM,
-	},
-};
-
-static struct smc91x_platdata viper_smc91x_info = {
-	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT,
-	.leda	= RPC_LED_100_10,
-	.ledb	= RPC_LED_TX_RX,
-};
-
-static struct platform_device smc91x_device = {
-	.name		= "smc91x",
-	.id		= -1,
-	.num_resources  = ARRAY_SIZE(smc91x_resources),
-	.resource       = smc91x_resources,
-	.dev		= {
-		.platform_data	= &viper_smc91x_info,
-	},
-};
-
-/* i2c */
-static struct i2c_gpio_platform_data i2c_bus_data = {
-	.sda_pin = VIPER_RTC_I2C_SDA_GPIO,
-	.scl_pin = VIPER_RTC_I2C_SCL_GPIO,
-	.udelay  = 10,
-	.timeout = HZ,
-};
-
-static struct platform_device i2c_bus_device = {
-	.name		= "i2c-gpio",
-	.id		= 1, /* pxa2xx-i2c is bus 0, so start at 1 */
-	.dev = {
-		.platform_data = &i2c_bus_data,
-	}
-};
-
-static struct i2c_board_info __initdata viper_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("ds1338", 0x68),
-	},
-};
-
-/*
- * Serial configuration:
- * You can either have the standard PXA ports driven by the PXA driver,
- * or all the ports (PXA + 16850) driven by the 8250 driver.
- * Choose your poison.
- */
-
-static struct resource viper_serial_resources[] = {
-#ifndef CONFIG_SERIAL_PXA
-	{
-		.start	= 0x40100000,
-		.end	= 0x4010001f,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= 0x40200000,
-		.end	= 0x4020001f,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= 0x40700000,
-		.end	= 0x4070001f,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= VIPER_UARTA_PHYS,
-		.end	= VIPER_UARTA_PHYS + 0xf,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= VIPER_UARTB_PHYS,
-		.end	= VIPER_UARTB_PHYS + 0xf,
-		.flags	= IORESOURCE_MEM,
-	},
-#else
-	{
-		0,
-	},
-#endif
-};
-
-static struct plat_serial8250_port serial_platform_data[] = {
-#ifndef CONFIG_SERIAL_PXA
-	/* Internal UARTs */
-	{
-		.membase	= (void *)&FFUART,
-		.mapbase	= __PREG(FFUART),
-		.irq		= IRQ_FFUART,
-		.uartclk	= 921600 * 16,
-		.regshift	= 2,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-		.iotype		= UPIO_MEM,
-	},
-	{
-		.membase	= (void *)&BTUART,
-		.mapbase	= __PREG(BTUART),
-		.irq		= IRQ_BTUART,
-		.uartclk	= 921600 * 16,
-		.regshift	= 2,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-		.iotype		= UPIO_MEM,
-	},
-	{
-		.membase	= (void *)&STUART,
-		.mapbase	= __PREG(STUART),
-		.irq		= IRQ_STUART,
-		.uartclk	= 921600 * 16,
-		.regshift	= 2,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-		.iotype		= UPIO_MEM,
-	},
-	/* External UARTs */
-	{
-		.mapbase	= VIPER_UARTA_PHYS,
-		.irq		= PXA_GPIO_TO_IRQ(VIPER_UARTA_GPIO),
-		.irqflags	= IRQF_TRIGGER_RISING,
-		.uartclk	= 1843200,
-		.regshift	= 1,
-		.iotype		= UPIO_MEM,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP |
-				  UPF_SKIP_TEST,
-	},
-	{
-		.mapbase	= VIPER_UARTB_PHYS,
-		.irq		= PXA_GPIO_TO_IRQ(VIPER_UARTB_GPIO),
-		.irqflags	= IRQF_TRIGGER_RISING,
-		.uartclk	= 1843200,
-		.regshift	= 1,
-		.iotype		= UPIO_MEM,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP |
-				  UPF_SKIP_TEST,
-	},
-#endif
-	{ },
-};
-
-static struct platform_device serial_device = {
-	.name			= "serial8250",
-	.id			= 0,
-	.dev			= {
-		.platform_data	= serial_platform_data,
-	},
-	.num_resources		= ARRAY_SIZE(viper_serial_resources),
-	.resource		= viper_serial_resources,
-};
-
-/* USB */
-static void isp116x_delay(struct device *dev, int delay)
-{
-	ndelay(delay);
-}
-
-static struct resource isp116x_resources[] = {
-	[0] = { /* DATA */
-		.start  = VIPER_USB_PHYS + 0,
-		.end    = VIPER_USB_PHYS + 1,
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = { /* ADDR */
-		.start  = VIPER_USB_PHYS + 2,
-		.end    = VIPER_USB_PHYS + 3,
-		.flags  = IORESOURCE_MEM,
-	},
-	[2] = {
-		.start  = PXA_GPIO_TO_IRQ(VIPER_USB_GPIO),
-		.end    = PXA_GPIO_TO_IRQ(VIPER_USB_GPIO),
-		.flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	},
-};
-
-/* (DataBusWidth16|AnalogOCEnable|DREQOutputPolarity|DownstreamPort15KRSel ) */
-static struct isp116x_platform_data isp116x_platform_data = {
-	/* Enable internal resistors on downstream ports */
-	.sel15Kres		= 1,
-	/* On-chip overcurrent protection */
-	.oc_enable		= 1,
-	/* INT output polarity */
-	.int_act_high		= 1,
-	/* INT edge or level triggered */
-	.int_edge_triggered	= 0,
-
-	/* WAKEUP pin connected - NOT SUPPORTED  */
-	/* .remote_wakeup_connected = 0, */
-	/* Wakeup by devices on usb bus enabled */
-	.remote_wakeup_enable	= 0,
-	.delay			= isp116x_delay,
-};
-
-static struct platform_device isp116x_device = {
-	.name			= "isp116x-hcd",
-	.id			= -1,
-	.num_resources  	= ARRAY_SIZE(isp116x_resources),
-	.resource       	= isp116x_resources,
-	.dev			= {
-		.platform_data	= &isp116x_platform_data,
-	},
-
-};
-
-/* MTD */
-static struct resource mtd_resources[] = {
-	[0] = {	/* RedBoot config + filesystem flash */
-		.start	= VIPER_FLASH_PHYS,
-		.end	= VIPER_FLASH_PHYS + SZ_32M - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {	/* Boot flash */
-		.start	= VIPER_BOOT_PHYS,
-		.end	= VIPER_BOOT_PHYS + SZ_1M - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[2] = { /*
-		 * SRAM size is actually 256KB, 8bits, with a sparse mapping
-		 * (each byte is on a 16bit boundary).
-		 */
-		.start	= _VIPER_SRAM_BASE,
-		.end	= _VIPER_SRAM_BASE + SZ_512K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct mtd_partition viper_boot_flash_partition = {
-	.name		= "RedBoot",
-	.size		= SZ_1M,
-	.offset		= 0,
-	.mask_flags	= MTD_WRITEABLE,	/* force R/O */
-};
-
-static struct physmap_flash_data viper_flash_data[] = {
-	[0] = {
-		.width		= 2,
-		.parts		= NULL,
-		.nr_parts	= 0,
-	},
-	[1] = {
-		.width		= 2,
-		.parts		= &viper_boot_flash_partition,
-		.nr_parts	= 1,
-	},
-};
-
-static struct platform_device viper_mtd_devices[] = {
-	[0] = {
-		.name		= "physmap-flash",
-		.id		= 0,
-		.dev		= {
-			.platform_data	= &viper_flash_data[0],
-		},
-		.resource	= &mtd_resources[0],
-		.num_resources	= 1,
-	},
-	[1] = {
-		.name		= "physmap-flash",
-		.id		= 1,
-		.dev		= {
-			.platform_data	= &viper_flash_data[1],
-		},
-		.resource	= &mtd_resources[1],
-		.num_resources	= 1,
-	},
-};
-
-static struct platform_device *viper_devs[] __initdata = {
-	&smc91x_device,
-	&i2c_bus_device,
-	&serial_device,
-	&isp116x_device,
-	&viper_mtd_devices[0],
-	&viper_mtd_devices[1],
-	&viper_backlight_device,
-	&viper_pcmcia_device,
-};
-
-static mfp_cfg_t viper_pin_config[] __initdata = {
-	/* Chip selects */
-	GPIO15_nCS_1,
-	GPIO78_nCS_2,
-	GPIO79_nCS_3,
-	GPIO80_nCS_4,
-	GPIO33_nCS_5,
-
-	/* AC97 */
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-
-	/* FP Backlight */
-	GPIO9_GPIO, 				/* VIPER_BCKLIGHT_EN_GPIO */
-	GPIO10_GPIO,				/* VIPER_LCD_EN_GPIO */
-	GPIO16_PWM0_OUT,
-
-	/* Ethernet PHY Ready */
-	GPIO18_RDY,
-
-	/* Serial shutdown */
-	GPIO12_GPIO | MFP_LPM_DRIVE_HIGH,	/* VIPER_UART_SHDN_GPIO */
-
-	/* Compact-Flash / PC104 */
-	GPIO48_nPOE,
-	GPIO49_nPWE,
-	GPIO50_nPIOR,
-	GPIO51_nPIOW,
-	GPIO52_nPCE_1,
-	GPIO53_nPCE_2,
-	GPIO54_nPSKTSEL,
-	GPIO55_nPREG,
-	GPIO56_nPWAIT,
-	GPIO57_nIOIS16,
-	GPIO8_GPIO,				/* VIPER_CF_RDY_GPIO */
-	GPIO32_GPIO,				/* VIPER_CF_CD_GPIO */
-	GPIO82_GPIO,				/* VIPER_CF_POWER_GPIO */
-
-	/* Integrated UPS control */
-	GPIO20_GPIO,				/* VIPER_UPS_GPIO */
-
-	/* Vcc regulator control */
-	GPIO6_GPIO,				/* VIPER_PSU_DATA_GPIO */
-	GPIO11_GPIO,				/* VIPER_PSU_CLK_GPIO */
-	GPIO19_GPIO,				/* VIPER_PSU_nCS_LD_GPIO */
-
-	/* i2c busses */
-	GPIO26_GPIO,				/* VIPER_TPM_I2C_SDA_GPIO */
-	GPIO27_GPIO,				/* VIPER_TPM_I2C_SCL_GPIO */
-	GPIO83_GPIO,				/* VIPER_RTC_I2C_SDA_GPIO */
-	GPIO84_GPIO,				/* VIPER_RTC_I2C_SCL_GPIO */
-
-	/* PC/104 Interrupt */
-	GPIO1_GPIO | WAKEUP_ON_EDGE_RISE,	/* VIPER_CPLD_GPIO */
-};
-
-static unsigned long viper_tpm;
-
-static int __init viper_tpm_setup(char *str)
-{
-	strict_strtoul(str, 10, &viper_tpm);
-	return 1;
-}
-
-__setup("tpm=", viper_tpm_setup);
-
-static void __init viper_tpm_init(void)
-{
-	struct platform_device *tpm_device;
-	struct i2c_gpio_platform_data i2c_tpm_data = {
-		.sda_pin = VIPER_TPM_I2C_SDA_GPIO,
-		.scl_pin = VIPER_TPM_I2C_SCL_GPIO,
-		.udelay  = 10,
-		.timeout = HZ,
-	};
-	char *errstr;
-
-	/* Allocate TPM i2c bus if requested */
-	if (!viper_tpm)
-		return;
-
-	tpm_device = platform_device_alloc("i2c-gpio", 2);
-	if (tpm_device) {
-		if (!platform_device_add_data(tpm_device,
-					      &i2c_tpm_data,
-					      sizeof(i2c_tpm_data))) {
-			if (platform_device_add(tpm_device)) {
-				errstr = "register TPM i2c bus";
-				goto error_free_tpm;
-			}
-		} else {
-			errstr = "allocate TPM i2c bus data";
-			goto error_free_tpm;
-		}
-	} else {
-		errstr = "allocate TPM i2c device";
-		goto error_tpm;
-	}
-
-	return;
-
-error_free_tpm:
-	kfree(tpm_device);
-error_tpm:
-	pr_err("viper: Couldn't %s, giving up\n", errstr);
-}
-
-static void __init viper_init_vcore_gpios(void)
-{
-	if (gpio_request(VIPER_PSU_DATA_GPIO, "PSU data"))
-		goto err_request_data;
-
-	if (gpio_request(VIPER_PSU_CLK_GPIO, "PSU clock"))
-		goto err_request_clk;
-
-	if (gpio_request(VIPER_PSU_nCS_LD_GPIO, "PSU cs"))
-		goto err_request_cs;
-
-	if (gpio_direction_output(VIPER_PSU_DATA_GPIO, 0) ||
-	    gpio_direction_output(VIPER_PSU_CLK_GPIO, 0) ||
-	    gpio_direction_output(VIPER_PSU_nCS_LD_GPIO, 0))
-		goto err_dir;
-
-	/* c/should assume redboot set the correct level ??? */
-	viper_set_core_cpu_voltage(get_clk_frequency_khz(0), 1);
-
-	return;
-
-err_dir:
-	gpio_free(VIPER_PSU_nCS_LD_GPIO);
-err_request_cs:
-	gpio_free(VIPER_PSU_CLK_GPIO);
-err_request_clk:
-	gpio_free(VIPER_PSU_DATA_GPIO);
-err_request_data:
-	pr_err("viper: Failed to setup vcore control GPIOs\n");
-}
-
-static void __init viper_init_serial_gpio(void)
-{
-	if (gpio_request(VIPER_UART_SHDN_GPIO, "UARTs shutdown"))
-		goto err_request;
-
-	if (gpio_direction_output(VIPER_UART_SHDN_GPIO, 0))
-		goto err_dir;
-
-	return;
-
-err_dir:
-	gpio_free(VIPER_UART_SHDN_GPIO);
-err_request:
-	pr_err("viper: Failed to setup UART shutdown GPIO\n");
-}
-
-#ifdef CONFIG_CPU_FREQ
-static int viper_cpufreq_notifier(struct notifier_block *nb,
-				  unsigned long val, void *data)
-{
-	struct cpufreq_freqs *freq = data;
-
-	/* TODO: Adjust timings??? */
-
-	switch (val) {
-	case CPUFREQ_PRECHANGE:
-		if (freq->old < freq->new) {
-			/* we are getting faster so raise the voltage
-			 * before we change freq */
-			viper_set_core_cpu_voltage(freq->new, 0);
-		}
-		break;
-	case CPUFREQ_POSTCHANGE:
-		if (freq->old > freq->new) {
-			/* we are slowing down so drop the power
-			 * after we change freq */
-			viper_set_core_cpu_voltage(freq->new, 0);
-		}
-		break;
-	case CPUFREQ_RESUMECHANGE:
-		viper_set_core_cpu_voltage(freq->new, 0);
-		break;
-	default:
-		/* ignore */
-		break;
-	}
-
-	return 0;
-}
-
-static struct notifier_block viper_cpufreq_notifier_block = {
-	.notifier_call  = viper_cpufreq_notifier
-};
-
-static void __init viper_init_cpufreq(void)
-{
-	if (cpufreq_register_notifier(&viper_cpufreq_notifier_block,
-				      CPUFREQ_TRANSITION_NOTIFIER))
-		pr_err("viper: Failed to setup cpufreq notifier\n");
-}
-#else
-static inline void viper_init_cpufreq(void) {}
-#endif
-
-static void viper_power_off(void)
-{
-	pr_notice("Shutting off UPS\n");
-	gpio_set_value(VIPER_UPS_GPIO, 1);
-	/* Spin to death... */
-	while (1);
-}
-
-static void __init viper_init(void)
-{
-	u8 version;
-
-	pm_power_off = viper_power_off;
-
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(viper_pin_config));
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	/* Wake-up serial console */
-	viper_init_serial_gpio();
-
-	pxa_set_fb_info(NULL, &fb_info);
-
-	/* v1 hardware cannot use the datacs line */
-	version = viper_hw_version();
-	if (version == 0)
-		smc91x_device.num_resources--;
-
-	pxa_set_i2c_info(NULL);
-	platform_add_devices(viper_devs, ARRAY_SIZE(viper_devs));
-
-	viper_init_vcore_gpios();
-	viper_init_cpufreq();
-
-	register_syscore_ops(&viper_cpu_syscore_ops);
-
-	if (version) {
-		pr_info("viper: hardware v%di%d detected. "
-			"CPLD revision %d.\n",
-			VIPER_BOARD_VERSION(version),
-			VIPER_BOARD_ISSUE(version),
-			VIPER_CPLD_REVISION(version));
-		system_rev = (VIPER_BOARD_VERSION(version) << 8) |
-			     (VIPER_BOARD_ISSUE(version) << 4) |
-			     VIPER_CPLD_REVISION(version);
-	} else {
-		pr_info("viper: No version register.\n");
-	}
-
-	i2c_register_board_info(1, ARRAY_AND_SIZE(viper_i2c_devices));
-
-	viper_tpm_init();
-	pxa_set_ac97_info(NULL);
-}
-
-static struct map_desc viper_io_desc[] __initdata = {
-	{
-		.virtual = VIPER_CPLD_BASE,
-		.pfn     = __phys_to_pfn(VIPER_CPLD_PHYS),
-		.length  = 0x00300000,
-		.type    = MT_DEVICE,
-	},
-	{
-		.virtual = VIPER_PC104IO_BASE,
-		.pfn     = __phys_to_pfn(0x30000000),
-		.length  = 0x00800000,
-		.type    = MT_DEVICE,
-	},
-};
-
-static void __init viper_map_io(void)
-{
-	pxa25x_map_io();
-
-	iotable_init(viper_io_desc, ARRAY_SIZE(viper_io_desc));
-
-	PCFR |= PCFR_OPDE;
-}
-
-MACHINE_START(VIPER, "Arcom/Eurotech VIPER SBC")
-	/* Maintainer: Marc Zyngier <maz@misterjones.org> */
-	.atag_offset	= 0x100,
-	.map_io		= viper_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= viper_init_irq,
-	.handle_irq	= pxa25x_handle_irq,
-	.timer          = &pxa_timer,
-	.init_machine	= viper_init,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/vpac270.c b/ANDROID_3.4.5/arch/arm/mach-pxa/vpac270.c
deleted file mode 100644
index c57ab636..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/vpac270.c
+++ /dev/null
@@ -1,727 +0,0 @@
-/*
- * Hardware definitions for Voipac PXA270
- *
- * Copyright (C) 2010
- * Marek Vasut <marek.vasut@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/irq.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/gpio.h>
-#include <linux/usb/gpio_vbus.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/onenand.h>
-#include <linux/dm9000.h>
-#include <linux/ucb1400.h>
-#include <linux/ata_platform.h>
-#include <linux/regulator/max1586.h>
-#include <linux/i2c/pxa-i2c.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include <mach/pxa27x.h>
-#include <mach/audio.h>
-#include <mach/vpac270.h>
-#include <mach/mmc.h>
-#include <mach/pxafb.h>
-#include <mach/ohci.h>
-#include <mach/pxa27x-udc.h>
-#include <mach/udc.h>
-#include <mach/pata_pxa.h>
-
-#include "generic.h"
-#include "devices.h"
-
-/******************************************************************************
- * Pin configuration
- ******************************************************************************/
-static unsigned long vpac270_pin_config[] __initdata = {
-	/* MMC */
-	GPIO32_MMC_CLK,
-	GPIO92_MMC_DAT_0,
-	GPIO109_MMC_DAT_1,
-	GPIO110_MMC_DAT_2,
-	GPIO111_MMC_DAT_3,
-	GPIO112_MMC_CMD,
-	GPIO53_GPIO,	/* SD detect */
-	GPIO52_GPIO,	/* SD r/o switch */
-
-	/* GPIO KEYS */
-	GPIO1_GPIO,	/* USER BTN */
-
-	/* LEDs */
-	GPIO15_GPIO,	/* orange led */
-
-	/* FFUART */
-	GPIO34_FFUART_RXD,
-	GPIO39_FFUART_TXD,
-	GPIO27_FFUART_RTS,
-	GPIO100_FFUART_CTS,
-	GPIO33_FFUART_DSR,
-	GPIO40_FFUART_DTR,
-	GPIO10_FFUART_DCD,
-	GPIO38_FFUART_RI,
-
-	/* LCD */
-	GPIO58_LCD_LDD_0,
-	GPIO59_LCD_LDD_1,
-	GPIO60_LCD_LDD_2,
-	GPIO61_LCD_LDD_3,
-	GPIO62_LCD_LDD_4,
-	GPIO63_LCD_LDD_5,
-	GPIO64_LCD_LDD_6,
-	GPIO65_LCD_LDD_7,
-	GPIO66_LCD_LDD_8,
-	GPIO67_LCD_LDD_9,
-	GPIO68_LCD_LDD_10,
-	GPIO69_LCD_LDD_11,
-	GPIO70_LCD_LDD_12,
-	GPIO71_LCD_LDD_13,
-	GPIO72_LCD_LDD_14,
-	GPIO73_LCD_LDD_15,
-	GPIO86_LCD_LDD_16,
-	GPIO87_LCD_LDD_17,
-	GPIO74_LCD_FCLK,
-	GPIO75_LCD_LCLK,
-	GPIO76_LCD_PCLK,
-	GPIO77_LCD_BIAS,
-
-	/* PCMCIA */
-	GPIO48_nPOE,
-	GPIO49_nPWE,
-	GPIO50_nPIOR,
-	GPIO51_nPIOW,
-	GPIO85_nPCE_1,
-	GPIO54_nPCE_2,
-	GPIO55_nPREG,
-	GPIO57_nIOIS16,
-	GPIO56_nPWAIT,
-	GPIO104_PSKTSEL,
-	GPIO84_GPIO,	/* PCMCIA CD */
-	GPIO35_GPIO,	/* PCMCIA RDY */
-	GPIO107_GPIO,	/* PCMCIA PPEN */
-	GPIO11_GPIO,	/* PCMCIA RESET */
-	GPIO17_GPIO,	/* CF CD */
-	GPIO12_GPIO,	/* CF RDY */
-	GPIO16_GPIO,	/* CF RESET */
-
-	/* UHC */
-	GPIO88_USBH1_PWR,
-	GPIO89_USBH1_PEN,
-	GPIO119_USBH2_PWR,
-	GPIO120_USBH2_PEN,
-
-	/* UDC */
-	GPIO41_GPIO,
-
-	/* Ethernet */
-	GPIO114_GPIO,	/* IRQ */
-
-	/* AC97 */
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-	GPIO95_AC97_nRESET,
-	GPIO98_AC97_SYSCLK,
-	GPIO113_GPIO,	/* TS IRQ */
-
-	/* I2C */
-	GPIO117_I2C_SCL,
-	GPIO118_I2C_SDA,
-
-	/* IDE */
-	GPIO36_GPIO,	/* IDE IRQ */
-	GPIO80_DREQ_1,
-};
-
-/******************************************************************************
- * NOR Flash
- ******************************************************************************/
-#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
-static struct mtd_partition vpac270_nor_partitions[] = {
-	{
-		.name		= "Flash",
-		.offset		= 0x00000000,
-		.size		= MTDPART_SIZ_FULL,
-	}
-};
-
-static struct physmap_flash_data vpac270_flash_data[] = {
-	{
-		.width		= 2,	/* bankwidth in bytes */
-		.parts		= vpac270_nor_partitions,
-		.nr_parts	= ARRAY_SIZE(vpac270_nor_partitions)
-	}
-};
-
-static struct resource vpac270_flash_resource = {
-	.start	= PXA_CS0_PHYS,
-	.end	= PXA_CS0_PHYS + SZ_64M - 1,
-	.flags	= IORESOURCE_MEM,
-};
-
-static struct platform_device vpac270_flash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.resource	= &vpac270_flash_resource,
-	.num_resources	= 1,
-	.dev 		= {
-		.platform_data = vpac270_flash_data,
-	},
-};
-static void __init vpac270_nor_init(void)
-{
-	platform_device_register(&vpac270_flash);
-}
-#else
-static inline void vpac270_nor_init(void) {}
-#endif
-
-/******************************************************************************
- * OneNAND Flash
- ******************************************************************************/
-#if defined(CONFIG_MTD_ONENAND) || defined(CONFIG_MTD_ONENAND_MODULE)
-static struct mtd_partition vpac270_onenand_partitions[] = {
-	{
-		.name		= "Flash",
-		.offset		= 0x00000000,
-		.size		= MTDPART_SIZ_FULL,
-	}
-};
-
-static struct onenand_platform_data vpac270_onenand_info = {
-	.parts		= vpac270_onenand_partitions,
-	.nr_parts	= ARRAY_SIZE(vpac270_onenand_partitions),
-};
-
-static struct resource vpac270_onenand_resources[] = {
-	[0] = {
-		.start	= PXA_CS0_PHYS,
-		.end	= PXA_CS0_PHYS + SZ_1M,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device vpac270_onenand = {
-	.name		= "onenand-flash",
-	.id		= -1,
-	.resource	= vpac270_onenand_resources,
-	.num_resources	= ARRAY_SIZE(vpac270_onenand_resources),
-	.dev		= {
-		.platform_data	= &vpac270_onenand_info,
-	},
-};
-
-static void __init vpac270_onenand_init(void)
-{
-	platform_device_register(&vpac270_onenand);
-}
-#else
-static void __init vpac270_onenand_init(void) {}
-#endif
-
-/******************************************************************************
- * SD/MMC card controller
- ******************************************************************************/
-#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
-static struct pxamci_platform_data vpac270_mci_platform_data = {
-	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.gpio_power		= -1,
-	.gpio_card_detect	= GPIO53_VPAC270_SD_DETECT_N,
-	.gpio_card_ro		= GPIO52_VPAC270_SD_READONLY,
-	.detect_delay_ms	= 200,
-};
-
-static void __init vpac270_mmc_init(void)
-{
-	pxa_set_mci_info(&vpac270_mci_platform_data);
-}
-#else
-static inline void vpac270_mmc_init(void) {}
-#endif
-
-/******************************************************************************
- * GPIO keys
- ******************************************************************************/
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-static struct gpio_keys_button vpac270_pxa_buttons[] = {
-	{KEY_POWER, GPIO1_VPAC270_USER_BTN, 0, "USER BTN"},
-};
-
-static struct gpio_keys_platform_data vpac270_pxa_keys_data = {
-	.buttons	= vpac270_pxa_buttons,
-	.nbuttons	= ARRAY_SIZE(vpac270_pxa_buttons),
-};
-
-static struct platform_device vpac270_pxa_keys = {
-	.name	= "gpio-keys",
-	.id	= -1,
-	.dev	= {
-		.platform_data = &vpac270_pxa_keys_data,
-	},
-};
-
-static void __init vpac270_keys_init(void)
-{
-	platform_device_register(&vpac270_pxa_keys);
-}
-#else
-static inline void vpac270_keys_init(void) {}
-#endif
-
-/******************************************************************************
- * LED
- ******************************************************************************/
-#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
-struct gpio_led vpac270_gpio_leds[] = {
-{
-	.name			= "vpac270:orange:user",
-	.default_trigger	= "none",
-	.gpio			= GPIO15_VPAC270_LED_ORANGE,
-	.active_low		= 1,
-}
-};
-
-static struct gpio_led_platform_data vpac270_gpio_led_info = {
-	.leds		= vpac270_gpio_leds,
-	.num_leds	= ARRAY_SIZE(vpac270_gpio_leds),
-};
-
-static struct platform_device vpac270_leds = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &vpac270_gpio_led_info,
-	}
-};
-
-static void __init vpac270_leds_init(void)
-{
-	platform_device_register(&vpac270_leds);
-}
-#else
-static inline void vpac270_leds_init(void) {}
-#endif
-
-/******************************************************************************
- * USB Host
- ******************************************************************************/
-#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-static int vpac270_ohci_init(struct device *dev)
-{
-	UP2OCR = UP2OCR_HXS | UP2OCR_HXOE | UP2OCR_DPPDE | UP2OCR_DMPDE;
-	return 0;
-}
-
-static struct pxaohci_platform_data vpac270_ohci_info = {
-	.port_mode	= PMM_PERPORT_MODE,
-	.flags		= ENABLE_PORT1 | ENABLE_PORT2 |
-			POWER_CONTROL_LOW | POWER_SENSE_LOW,
-	.init		= vpac270_ohci_init,
-};
-
-static void __init vpac270_uhc_init(void)
-{
-	pxa_set_ohci_info(&vpac270_ohci_info);
-}
-#else
-static inline void vpac270_uhc_init(void) {}
-#endif
-
-/******************************************************************************
- * USB Gadget
- ******************************************************************************/
-#if defined(CONFIG_USB_PXA27X)||defined(CONFIG_USB_PXA27X_MODULE)
-static struct gpio_vbus_mach_info vpac270_gpio_vbus_info = {
-	.gpio_vbus		= GPIO41_VPAC270_UDC_DETECT,
-	.gpio_pullup		= -1,
-};
-
-static struct platform_device vpac270_gpio_vbus = {
-	.name	= "gpio-vbus",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &vpac270_gpio_vbus_info,
-	},
-};
-
-static void vpac270_udc_command(int cmd)
-{
-	if (cmd == PXA2XX_UDC_CMD_CONNECT)
-		UP2OCR = UP2OCR_HXOE | UP2OCR_DPPUE;
-	else if (cmd == PXA2XX_UDC_CMD_DISCONNECT)
-		UP2OCR = UP2OCR_HXOE;
-}
-
-static struct pxa2xx_udc_mach_info vpac270_udc_info __initdata = {
-	.udc_command		= vpac270_udc_command,
-	.gpio_pullup		= -1,
-};
-
-static void __init vpac270_udc_init(void)
-{
-	pxa_set_udc_info(&vpac270_udc_info);
-	platform_device_register(&vpac270_gpio_vbus);
-}
-#else
-static inline void vpac270_udc_init(void) {}
-#endif
-
-/******************************************************************************
- * Ethernet
- ******************************************************************************/
-#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
-static struct resource vpac270_dm9000_resources[] = {
-	[0] = {
-		.start	= PXA_CS2_PHYS + 0x300,
-		.end	= PXA_CS2_PHYS + 0x303,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= PXA_CS2_PHYS + 0x304,
-		.end	= PXA_CS2_PHYS + 0x343,
-		.flags	= IORESOURCE_MEM,
-	},
-	[2] = {
-		.start	= PXA_GPIO_TO_IRQ(GPIO114_VPAC270_ETH_IRQ),
-		.end	= PXA_GPIO_TO_IRQ(GPIO114_VPAC270_ETH_IRQ),
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	},
-};
-
-static struct dm9000_plat_data vpac270_dm9000_platdata = {
-	.flags		= DM9000_PLATF_32BITONLY,
-};
-
-static struct platform_device vpac270_dm9000_device = {
-	.name		= "dm9000",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(vpac270_dm9000_resources),
-	.resource	= vpac270_dm9000_resources,
-	.dev		= {
-		.platform_data = &vpac270_dm9000_platdata,
-	}
-};
-
-static void __init vpac270_eth_init(void)
-{
-	platform_device_register(&vpac270_dm9000_device);
-}
-#else
-static inline void vpac270_eth_init(void) {}
-#endif
-
-/******************************************************************************
- * Audio and Touchscreen
- ******************************************************************************/
-#if	defined(CONFIG_TOUCHSCREEN_UCB1400) || \
-	defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE)
-static pxa2xx_audio_ops_t vpac270_ac97_pdata = {
-	.reset_gpio	= 95,
-};
-
-static struct ucb1400_pdata vpac270_ucb1400_pdata = {
-	.irq		= PXA_GPIO_TO_IRQ(GPIO113_VPAC270_TS_IRQ),
-};
-
-static struct platform_device vpac270_ucb1400_device = {
-	.name		= "ucb1400_core",
-	.id		= -1,
-	.dev		= {
-		.platform_data = &vpac270_ucb1400_pdata,
-	},
-};
-
-static void __init vpac270_ts_init(void)
-{
-	pxa_set_ac97_info(&vpac270_ac97_pdata);
-	platform_device_register(&vpac270_ucb1400_device);
-}
-#else
-static inline void vpac270_ts_init(void) {}
-#endif
-
-/******************************************************************************
- * RTC
- ******************************************************************************/
-#if defined(CONFIG_RTC_DRV_DS1307) || defined(CONFIG_RTC_DRV_DS1307_MODULE)
-static struct i2c_board_info __initdata vpac270_i2c_devs[] = {
-	{
-		I2C_BOARD_INFO("ds1339", 0x68),
-	},
-};
-
-static void __init vpac270_rtc_init(void)
-{
-	i2c_register_board_info(0, ARRAY_AND_SIZE(vpac270_i2c_devs));
-}
-#else
-static inline void vpac270_rtc_init(void) {}
-#endif
-
-/******************************************************************************
- * Framebuffer
- ******************************************************************************/
-#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
-static struct pxafb_mode_info vpac270_lcd_modes[] = {
-{
-	.pixclock	= 57692,
-	.xres		= 640,
-	.yres		= 480,
-	.bpp		= 32,
-	.depth		= 18,
-
-	.left_margin	= 144,
-	.right_margin	= 32,
-	.upper_margin	= 13,
-	.lower_margin	= 30,
-
-	.hsync_len	= 32,
-	.vsync_len	= 2,
-
-	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-}, {	/* CRT 640x480 */
-	.pixclock	= 35000,
-	.xres		= 640,
-	.yres		= 480,
-	.bpp		= 16,
-	.depth		= 16,
-
-	.left_margin	= 96,
-	.right_margin	= 48,
-	.upper_margin	= 33,
-	.lower_margin	= 10,
-
-	.hsync_len	= 48,
-	.vsync_len	= 1,
-
-	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-}, {	/* CRT 800x600 H=30kHz V=48HZ */
-	.pixclock	= 25000,
-	.xres		= 800,
-	.yres		= 600,
-	.bpp		= 16,
-	.depth		= 16,
-
-	.left_margin	= 50,
-	.right_margin	= 1,
-	.upper_margin	= 21,
-	.lower_margin	= 12,
-
-	.hsync_len	= 8,
-	.vsync_len	= 1,
-
-	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-}, {	/* CRT 1024x768 H=40kHz V=50Hz */
-	.pixclock	= 15000,
-	.xres		= 1024,
-	.yres		= 768,
-	.bpp		= 16,
-	.depth		= 16,
-
-	.left_margin	= 220,
-	.right_margin	= 8,
-	.upper_margin	= 33,
-	.lower_margin	= 2,
-
-	.hsync_len	= 48,
-	.vsync_len	= 1,
-
-	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-}
-};
-
-static struct pxafb_mach_info vpac270_lcd_screen = {
-	.modes		= vpac270_lcd_modes,
-	.num_modes	= ARRAY_SIZE(vpac270_lcd_modes),
-	.lcd_conn	= LCD_COLOR_TFT_18BPP,
-};
-
-static void vpac270_lcd_power(int on, struct fb_var_screeninfo *info)
-{
-	gpio_set_value(GPIO81_VPAC270_BKL_ON, on);
-}
-
-static void __init vpac270_lcd_init(void)
-{
-	int ret;
-
-	ret = gpio_request(GPIO81_VPAC270_BKL_ON, "BKL-ON");
-	if (ret) {
-		pr_err("Requesting BKL-ON GPIO failed!\n");
-		goto err;
-	}
-
-	ret = gpio_direction_output(GPIO81_VPAC270_BKL_ON, 1);
-	if (ret) {
-		pr_err("Setting BKL-ON GPIO direction failed!\n");
-		goto err2;
-	}
-
-	vpac270_lcd_screen.pxafb_lcd_power = vpac270_lcd_power;
-	pxa_set_fb_info(NULL, &vpac270_lcd_screen);
-	return;
-
-err2:
-	gpio_free(GPIO81_VPAC270_BKL_ON);
-err:
-	return;
-}
-#else
-static inline void vpac270_lcd_init(void) {}
-#endif
-
-/******************************************************************************
- * PATA IDE
- ******************************************************************************/
-#if defined(CONFIG_PATA_PXA) || defined(CONFIG_PATA_PXA_MODULE)
-static struct pata_pxa_pdata vpac270_pata_pdata = {
-	.reg_shift	= 1,
-	.dma_dreq	= 1,
-	.irq_flags	= IRQF_TRIGGER_RISING,
-};
-
-static struct resource vpac270_ide_resources[] = {
-	[0] = {	/* I/O Base address */
-	       .start	= PXA_CS3_PHYS + 0x120,
-	       .end	= PXA_CS3_PHYS + 0x13f,
-	       .flags	= IORESOURCE_MEM
-	},
-	[1] = {	/* CTL Base address */
-	       .start	= PXA_CS3_PHYS + 0x15c,
-	       .end	= PXA_CS3_PHYS + 0x15f,
-	       .flags	= IORESOURCE_MEM
-	},
-	[2] = {	/* DMA Base address */
-	       .start	= PXA_CS3_PHYS + 0x20,
-	       .end	= PXA_CS3_PHYS + 0x2f,
-	       .flags	= IORESOURCE_DMA
-	},
-	[3] = {	/* IDE IRQ pin */
-	       .start	= PXA_GPIO_TO_IRQ(GPIO36_VPAC270_IDE_IRQ),
-	       .end	= PXA_GPIO_TO_IRQ(GPIO36_VPAC270_IDE_IRQ),
-	       .flags	= IORESOURCE_IRQ
-	}
-};
-
-static struct platform_device vpac270_ide_device = {
-	.name		= "pata_pxa",
-	.num_resources	= ARRAY_SIZE(vpac270_ide_resources),
-	.resource	= vpac270_ide_resources,
-	.dev		= {
-		.platform_data	= &vpac270_pata_pdata,
-		.coherent_dma_mask	= 0xffffffff,
-	}
-};
-
-static void __init vpac270_ide_init(void)
-{
-	platform_device_register(&vpac270_ide_device);
-}
-#else
-static inline void vpac270_ide_init(void) {}
-#endif
-
-/******************************************************************************
- * Core power regulator
- ******************************************************************************/
-#if defined(CONFIG_REGULATOR_MAX1586) || \
-    defined(CONFIG_REGULATOR_MAX1586_MODULE)
-static struct regulator_consumer_supply vpac270_max1587a_consumers[] = {
-	{
-		.supply	= "vcc_core",
-	}
-};
-
-static struct regulator_init_data vpac270_max1587a_v3_info = {
-	.constraints = {
-		.name		= "vcc_core range",
-		.min_uV		= 900000,
-		.max_uV		= 1705000,
-		.always_on	= 1,
-		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE,
-	},
-	.consumer_supplies	= vpac270_max1587a_consumers,
-	.num_consumer_supplies	= ARRAY_SIZE(vpac270_max1587a_consumers),
-};
-
-static struct max1586_subdev_data vpac270_max1587a_subdevs[] = {
-	{
-		.name		= "vcc_core",
-		.id		= MAX1586_V3,
-		.platform_data	= &vpac270_max1587a_v3_info,
-	}
-};
-
-static struct max1586_platform_data vpac270_max1587a_info = {
-	.subdevs     = vpac270_max1587a_subdevs,
-	.num_subdevs = ARRAY_SIZE(vpac270_max1587a_subdevs),
-	.v3_gain     = MAX1586_GAIN_R24_3k32, /* 730..1550 mV */
-};
-
-static struct i2c_board_info __initdata vpac270_pi2c_board_info[] = {
-	{
-		I2C_BOARD_INFO("max1586", 0x14),
-		.platform_data	= &vpac270_max1587a_info,
-	},
-};
-
-static void __init vpac270_pmic_init(void)
-{
-	i2c_register_board_info(1, ARRAY_AND_SIZE(vpac270_pi2c_board_info));
-}
-#else
-static inline void vpac270_pmic_init(void) {}
-#endif
-
-
-/******************************************************************************
- * Machine init
- ******************************************************************************/
-static void __init vpac270_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(vpac270_pin_config));
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-	pxa_set_i2c_info(NULL);
-	pxa27x_set_i2c_power_info(NULL);
-
-	vpac270_pmic_init();
-	vpac270_lcd_init();
-	vpac270_mmc_init();
-	vpac270_nor_init();
-	vpac270_onenand_init();
-	vpac270_leds_init();
-	vpac270_keys_init();
-	vpac270_uhc_init();
-	vpac270_udc_init();
-	vpac270_eth_init();
-	vpac270_ts_init();
-	vpac270_rtc_init();
-	vpac270_ide_init();
-}
-
-MACHINE_START(VPAC270, "Voipac PXA270")
-	.atag_offset	= 0x100,
-	.map_io		= pxa27x_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa27x_init_irq,
-	.handle_irq	= pxa27x_handle_irq,
-	.timer		= &pxa_timer,
-	.init_machine	= vpac270_init,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/xcep.c b/ANDROID_3.4.5/arch/arm/mach-pxa/xcep.c
deleted file mode 100644
index 4275713c..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/xcep.c
+++ /dev/null
@@ -1,191 +0,0 @@
-/*  linux/arch/arm/mach-pxa/xcep.c
- *
- *  Support for the Iskratel Electronics XCEP platform as used in
- *  the Libera instruments from Instrumentation Technologies.
- *
- *  Author:     Ales Bardorfer <ales@i-tech.si>
- *  Contributions by: Abbott, MG (Michael) <michael.abbott@diamond.ac.uk>
- *  Contributions by: Matej Kenda <matej.kenda@i-tech.si>
- *  Created:    June 2006
- *  Copyright:  (C) 2006-2009 Instrumentation Technologies
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#include <linux/platform_device.h>
-#include <linux/i2c.h>
-#include <linux/i2c/pxa-i2c.h>
-#include <linux/smc91x.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/map.h>
-
-#include <mach/hardware.h>
-#include <mach/pxa25x.h>
-#include <mach/smemc.h>
-
-#include "generic.h"
-
-#define XCEP_ETH_PHYS		(PXA_CS3_PHYS + 0x00000300)
-#define XCEP_ETH_PHYS_END	(PXA_CS3_PHYS + 0x000fffff)
-#define XCEP_ETH_ATTR		(PXA_CS3_PHYS + 0x02000000)
-#define XCEP_ETH_ATTR_END	(PXA_CS3_PHYS + 0x020fffff)
-#define XCEP_ETH_IRQ		IRQ_GPIO0
-
-/*  XCEP CPLD base */
-#define XCEP_CPLD_BASE		0xf0000000
-
-
-/* Flash partitions. */
-
-static struct mtd_partition xcep_partitions[] = {
-	{
-		.name =		"Bootloader",
-		.size =		0x00040000,
-		.offset =	0,
-		.mask_flags =	MTD_WRITEABLE
-	}, {
-		.name =		"Bootloader ENV",
-		.size =		0x00040000,
-		.offset =	0x00040000,
-		.mask_flags =	MTD_WRITEABLE
-	}, {
-		.name =		"Kernel",
-		.size =		0x00100000,
-		.offset =	0x00080000,
-	}, {
-		.name =		"Rescue fs",
-		.size =		0x00280000,
-		.offset =	0x00180000,
-	}, {
-		.name =		"Filesystem",
-		.size =		MTDPART_SIZ_FULL,
-		.offset =	0x00400000
-	}
-};
-
-static struct physmap_flash_data xcep_flash_data[] = {
-	{
-		.width		= 4,		/* bankwidth in bytes */
-		.parts		= xcep_partitions,
-		.nr_parts	= ARRAY_SIZE(xcep_partitions)
-	}
-};
-
-static struct resource flash_resource = {
-	.start	= PXA_CS0_PHYS,
-	.end	= PXA_CS0_PHYS + SZ_32M - 1,
-	.flags	= IORESOURCE_MEM,
-};
-
-static struct platform_device flash_device = {
-	.name	= "physmap-flash",
-	.id	= 0,
-	.dev 	= {
-		.platform_data = xcep_flash_data,
-	},
-	.resource = &flash_resource,
-	.num_resources = 1,
-};
-
-
-
-/* SMC LAN91C111 network controller. */
-
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.name	= "smc91x-regs",
-		.start	= XCEP_ETH_PHYS,
-		.end	= XCEP_ETH_PHYS_END,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= XCEP_ETH_IRQ,
-		.end	= XCEP_ETH_IRQ,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.name	= "smc91x-attrib",
-		.start	= XCEP_ETH_ATTR,
-		.end	= XCEP_ETH_ATTR_END,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct smc91x_platdata xcep_smc91x_info = {
-	.flags	= SMC91X_USE_32BIT | SMC91X_NOWAIT | SMC91X_USE_DMA,
-};
-
-static struct platform_device smc91x_device = {
-	.name		= "smc91x",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(smc91x_resources),
-	.resource	= smc91x_resources,
-	.dev		= {
-		.platform_data = &xcep_smc91x_info,
-	},
-};
-
-
-static struct platform_device *devices[] __initdata = {
-	&flash_device,
-	&smc91x_device,
-};
-
-
-/* We have to state that there are HWMON devices on the I2C bus on XCEP.
- * Drivers for HWMON verify capabilities of the adapter when loading and
- * refuse to attach if the adapter doesn't support HWMON class of devices. */
-static struct i2c_pxa_platform_data xcep_i2c_platform_data  = {
-	.class = I2C_CLASS_HWMON
-};
-
-
-static mfp_cfg_t xcep_pin_config[] __initdata = {
-	GPIO79_nCS_3,	/* SMC 91C111 chip select. */
-	GPIO80_nCS_4,	/* CPLD chip select. */
-	/* SSP communication to MSP430 */
-	GPIO23_SSP1_SCLK,
-	GPIO24_SSP1_SFRM,
-	GPIO25_SSP1_TXD,
-	GPIO26_SSP1_RXD,
-	GPIO27_SSP1_EXTCLK
-};
-
-static void __init xcep_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(xcep_pin_config));
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-	pxa_set_hwuart_info(NULL);
-
-	/* See Intel XScale Developer's Guide for details */
-	/* Set RDF and RDN to appropriate values (chip select 3 (smc91x)) */
-	__raw_writel((__raw_readl(MSC1) & 0xffff) | 0xD5540000, MSC1);
-	/* Set RDF and RDN to appropriate values (chip select 5 (fpga)) */
-	__raw_writel((__raw_readl(MSC2) & 0xffff) | 0x72A00000, MSC2);
-
-	platform_add_devices(ARRAY_AND_SIZE(devices));
-	pxa_set_i2c_info(&xcep_i2c_platform_data);
-}
-
-MACHINE_START(XCEP, "Iskratel XCEP")
-	.atag_offset	= 0x100,
-	.init_machine	= xcep_init,
-	.map_io		= pxa25x_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa25x_init_irq,
-	.handle_irq	= pxa25x_handle_irq,
-	.timer		= &pxa_timer,
-	.restart	= pxa_restart,
-MACHINE_END
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/z2.c b/ANDROID_3.4.5/arch/arm/mach-pxa/z2.c
deleted file mode 100644
index fa861997..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/z2.c
+++ /dev/null
@@ -1,730 +0,0 @@
-/*
- *  linux/arch/arm/mach-pxa/z2.c
- *
- *  Support for the Zipit Z2 Handheld device.
- *
- *  Copyright (C) 2009-2010 Marek Vasut <marek.vasut@gmail.com>
- *
- *  Based on research and code by: Ken McGuire
- *  Based on mainstone.c as modified for the Zipit Z2.
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/pwm_backlight.h>
-#include <linux/z2_battery.h>
-#include <linux/dma-mapping.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/pxa2xx_spi.h>
-#include <linux/spi/libertas_spi.h>
-#include <linux/spi/lms283gf05.h>
-#include <linux/power_supply.h>
-#include <linux/mtd/physmap.h>
-#include <linux/gpio.h>
-#include <linux/gpio_keys.h>
-#include <linux/delay.h>
-#include <linux/regulator/machine.h>
-#include <linux/i2c/pxa-i2c.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include <mach/pxa27x.h>
-#include <mach/mfp-pxa27x.h>
-#include <mach/z2.h>
-#include <mach/pxafb.h>
-#include <mach/mmc.h>
-#include <plat/pxa27x_keypad.h>
-#include <mach/pm.h>
-
-#include "generic.h"
-#include "devices.h"
-
-/******************************************************************************
- * Pin configuration
- ******************************************************************************/
-static unsigned long z2_pin_config[] = {
-
-	/* LCD - 16bpp Active TFT */
-	GPIO58_LCD_LDD_0,
-	GPIO59_LCD_LDD_1,
-	GPIO60_LCD_LDD_2,
-	GPIO61_LCD_LDD_3,
-	GPIO62_LCD_LDD_4,
-	GPIO63_LCD_LDD_5,
-	GPIO64_LCD_LDD_6,
-	GPIO65_LCD_LDD_7,
-	GPIO66_LCD_LDD_8,
-	GPIO67_LCD_LDD_9,
-	GPIO68_LCD_LDD_10,
-	GPIO69_LCD_LDD_11,
-	GPIO70_LCD_LDD_12,
-	GPIO71_LCD_LDD_13,
-	GPIO72_LCD_LDD_14,
-	GPIO73_LCD_LDD_15,
-	GPIO74_LCD_FCLK,
-	GPIO75_LCD_LCLK,
-	GPIO76_LCD_PCLK,
-	GPIO77_LCD_BIAS,
-	GPIO19_GPIO,		/* LCD reset */
-	GPIO88_GPIO,		/* LCD chipselect */
-
-	/* PWM */
-	GPIO115_PWM1_OUT,	/* Keypad Backlight */
-	GPIO11_PWM2_OUT,	/* LCD Backlight */
-
-	/* MMC */
-	GPIO32_MMC_CLK,
-	GPIO112_MMC_CMD,
-	GPIO92_MMC_DAT_0,
-	GPIO109_MMC_DAT_1,
-	GPIO110_MMC_DAT_2,
-	GPIO111_MMC_DAT_3,
-	GPIO96_GPIO,		/* SD detect */
-
-	/* STUART */
-	GPIO46_STUART_RXD,
-	GPIO47_STUART_TXD,
-
-	/* Keypad */
-	GPIO100_KP_MKIN_0,
-	GPIO101_KP_MKIN_1,
-	GPIO102_KP_MKIN_2,
-	GPIO34_KP_MKIN_3,
-	GPIO38_KP_MKIN_4,
-	GPIO16_KP_MKIN_5,
-	GPIO17_KP_MKIN_6,
-	GPIO103_KP_MKOUT_0,
-	GPIO104_KP_MKOUT_1,
-	GPIO105_KP_MKOUT_2,
-	GPIO106_KP_MKOUT_3,
-	GPIO107_KP_MKOUT_4,
-	GPIO108_KP_MKOUT_5,
-	GPIO35_KP_MKOUT_6,
-	GPIO41_KP_MKOUT_7,
-
-	/* I2C */
-	GPIO117_I2C_SCL,
-	GPIO118_I2C_SDA,
-
-	/* SSP1 */
-	GPIO23_SSP1_SCLK,	/* SSP1_SCK */
-	GPIO25_SSP1_TXD,	/* SSP1_TXD */
-	GPIO26_SSP1_RXD,	/* SSP1_RXD */
-
-	/* SSP2 */
-	GPIO22_SSP2_SCLK,	/* SSP2_SCK */
-	GPIO13_SSP2_TXD,	/* SSP2_TXD */
-	GPIO40_SSP2_RXD,	/* SSP2_RXD */
-
-	/* LEDs */
-	GPIO10_GPIO,		/* WiFi LED */
-	GPIO83_GPIO,		/* Charging LED */
-	GPIO85_GPIO,		/* Charged LED */
-
-	/* I2S */
-	GPIO28_I2S_BITCLK_OUT,
-	GPIO29_I2S_SDATA_IN,
-	GPIO30_I2S_SDATA_OUT,
-	GPIO31_I2S_SYNC,
-	GPIO113_I2S_SYSCLK,
-
-	/* MISC */
-	GPIO0_GPIO,		/* AC power detect */
-	GPIO1_GPIO,		/* Power button */
-	GPIO37_GPIO,		/* Headphone detect */
-	GPIO98_GPIO,		/* Lid switch */
-	GPIO14_GPIO,		/* WiFi Power */
-	GPIO24_GPIO,		/* WiFi CS */
-	GPIO36_GPIO,		/* WiFi IRQ */
-	GPIO88_GPIO,		/* LCD CS */
-};
-
-/******************************************************************************
- * NOR Flash
- ******************************************************************************/
-#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
-static struct resource z2_flash_resource = {
-	.start	= PXA_CS0_PHYS,
-	.end	= PXA_CS0_PHYS + SZ_8M - 1,
-	.flags	= IORESOURCE_MEM,
-};
-
-static struct mtd_partition z2_flash_parts[] = {
-	{
-		.name	= "U-Boot Bootloader",
-		.offset	= 0x0,
-		.size	= 0x40000,
-	}, {
-		.name	= "U-Boot Environment",
-		.offset	= 0x40000,
-		.size	= 0x20000,
-	}, {
-		.name	= "Flash",
-		.offset	= 0x60000,
-		.size	= MTDPART_SIZ_FULL,
-	},
-};
-
-static struct physmap_flash_data z2_flash_data = {
-	.width		= 2,
-	.parts		= z2_flash_parts,
-	.nr_parts	= ARRAY_SIZE(z2_flash_parts),
-};
-
-static struct platform_device z2_flash = {
-	.name		= "physmap-flash",
-	.id		= -1,
-	.resource	= &z2_flash_resource,
-	.num_resources	= 1,
-	.dev = {
-		.platform_data	= &z2_flash_data,
-	},
-};
-
-static void __init z2_nor_init(void)
-{
-	platform_device_register(&z2_flash);
-}
-#else
-static inline void z2_nor_init(void) {}
-#endif
-
-/******************************************************************************
- * Backlight
- ******************************************************************************/
-#if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE)
-static struct platform_pwm_backlight_data z2_backlight_data[] = {
-	[0] = {
-		/* Keypad Backlight */
-		.pwm_id		= 1,
-		.max_brightness	= 1023,
-		.dft_brightness	= 0,
-		.pwm_period_ns	= 1260320,
-	},
-	[1] = {
-		/* LCD Backlight */
-		.pwm_id		= 2,
-		.max_brightness	= 1023,
-		.dft_brightness	= 512,
-		.pwm_period_ns	= 1260320,
-	},
-};
-
-static struct platform_device z2_backlight_devices[2] = {
-	{
-		.name	= "pwm-backlight",
-		.id	= 0,
-		.dev	= {
-			.platform_data	= &z2_backlight_data[1],
-		},
-	},
-	{
-		.name	= "pwm-backlight",
-		.id	= 1,
-		.dev	= {
-			.platform_data	= &z2_backlight_data[0],
-		},
-	},
-};
-static void __init z2_pwm_init(void)
-{
-	platform_device_register(&z2_backlight_devices[0]);
-	platform_device_register(&z2_backlight_devices[1]);
-}
-#else
-static inline void z2_pwm_init(void) {}
-#endif
-
-/******************************************************************************
- * Framebuffer
- ******************************************************************************/
-#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
-static struct pxafb_mode_info z2_lcd_modes[] = {
-{
-	.pixclock	= 192000,
-	.xres		= 240,
-	.yres		= 320,
-	.bpp		= 16,
-
-	.left_margin	= 4,
-	.right_margin	= 8,
-	.upper_margin	= 4,
-	.lower_margin	= 8,
-
-	.hsync_len	= 4,
-	.vsync_len	= 4,
-},
-};
-
-static struct pxafb_mach_info z2_lcd_screen = {
-	.modes		= z2_lcd_modes,
-	.num_modes      = ARRAY_SIZE(z2_lcd_modes),
-	.lcd_conn	= LCD_COLOR_TFT_16BPP | LCD_BIAS_ACTIVE_LOW |
-			  LCD_ALTERNATE_MAPPING,
-};
-
-static void __init z2_lcd_init(void)
-{
-	pxa_set_fb_info(NULL, &z2_lcd_screen);
-}
-#else
-static inline void z2_lcd_init(void) {}
-#endif
-
-/******************************************************************************
- * SD/MMC card controller
- ******************************************************************************/
-#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
-static struct pxamci_platform_data z2_mci_platform_data = {
-	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.gpio_card_detect	= GPIO96_ZIPITZ2_SD_DETECT,
-	.gpio_power		= -1,
-	.gpio_card_ro		= -1,
-	.detect_delay_ms	= 200,
-};
-
-static void __init z2_mmc_init(void)
-{
-	pxa_set_mci_info(&z2_mci_platform_data);
-}
-#else
-static inline void z2_mmc_init(void) {}
-#endif
-
-/******************************************************************************
- * LEDs
- ******************************************************************************/
-#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
-struct gpio_led z2_gpio_leds[] = {
-{
-	.name			= "z2:green:wifi",
-	.default_trigger	= "none",
-	.gpio			= GPIO10_ZIPITZ2_LED_WIFI,
-	.active_low		= 1,
-}, {
-	.name			= "z2:green:charged",
-	.default_trigger	= "mmc0",
-	.gpio			= GPIO85_ZIPITZ2_LED_CHARGED,
-	.active_low		= 1,
-}, {
-	.name			= "z2:amber:charging",
-	.default_trigger	= "Z2-charging-or-full",
-	.gpio			= GPIO83_ZIPITZ2_LED_CHARGING,
-	.active_low		= 1,
-},
-};
-
-static struct gpio_led_platform_data z2_gpio_led_info = {
-	.leds		= z2_gpio_leds,
-	.num_leds	= ARRAY_SIZE(z2_gpio_leds),
-};
-
-static struct platform_device z2_leds = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &z2_gpio_led_info,
-	}
-};
-
-static void __init z2_leds_init(void)
-{
-	platform_device_register(&z2_leds);
-}
-#else
-static inline void z2_leds_init(void) {}
-#endif
-
-/******************************************************************************
- * GPIO keyboard
- ******************************************************************************/
-#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
-static unsigned int z2_matrix_keys[] = {
-	KEY(0, 0, KEY_OPTION),
-	KEY(1, 0, KEY_UP),
-	KEY(2, 0, KEY_DOWN),
-	KEY(3, 0, KEY_LEFT),
-	KEY(4, 0, KEY_RIGHT),
-	KEY(5, 0, KEY_END),
-	KEY(6, 0, KEY_KPPLUS),
-
-	KEY(0, 1, KEY_HOME),
-	KEY(1, 1, KEY_Q),
-	KEY(2, 1, KEY_I),
-	KEY(3, 1, KEY_G),
-	KEY(4, 1, KEY_X),
-	KEY(5, 1, KEY_ENTER),
-	KEY(6, 1, KEY_KPMINUS),
-
-	KEY(0, 2, KEY_PAGEUP),
-	KEY(1, 2, KEY_W),
-	KEY(2, 2, KEY_O),
-	KEY(3, 2, KEY_H),
-	KEY(4, 2, KEY_C),
-	KEY(5, 2, KEY_LEFTALT),
-
-	KEY(0, 3, KEY_PAGEDOWN),
-	KEY(1, 3, KEY_E),
-	KEY(2, 3, KEY_P),
-	KEY(3, 3, KEY_J),
-	KEY(4, 3, KEY_V),
-	KEY(5, 3, KEY_LEFTSHIFT),
-
-	KEY(0, 4, KEY_ESC),
-	KEY(1, 4, KEY_R),
-	KEY(2, 4, KEY_A),
-	KEY(3, 4, KEY_K),
-	KEY(4, 4, KEY_B),
-	KEY(5, 4, KEY_LEFTCTRL),
-
-	KEY(0, 5, KEY_TAB),
-	KEY(1, 5, KEY_T),
-	KEY(2, 5, KEY_S),
-	KEY(3, 5, KEY_L),
-	KEY(4, 5, KEY_N),
-	KEY(5, 5, KEY_SPACE),
-
-	KEY(0, 6, KEY_STOPCD),
-	KEY(1, 6, KEY_Y),
-	KEY(2, 6, KEY_D),
-	KEY(3, 6, KEY_BACKSPACE),
-	KEY(4, 6, KEY_M),
-	KEY(5, 6, KEY_COMMA),
-
-	KEY(0, 7, KEY_PLAYCD),
-	KEY(1, 7, KEY_U),
-	KEY(2, 7, KEY_F),
-	KEY(3, 7, KEY_Z),
-	KEY(4, 7, KEY_SEMICOLON),
-	KEY(5, 7, KEY_DOT),
-};
-
-static struct pxa27x_keypad_platform_data z2_keypad_platform_data = {
-	.matrix_key_rows	= 7,
-	.matrix_key_cols	= 8,
-	.matrix_key_map		= z2_matrix_keys,
-	.matrix_key_map_size	= ARRAY_SIZE(z2_matrix_keys),
-
-	.debounce_interval	= 30,
-};
-
-static void __init z2_mkp_init(void)
-{
-	pxa_set_keypad_info(&z2_keypad_platform_data);
-}
-#else
-static inline void z2_mkp_init(void) {}
-#endif
-
-/******************************************************************************
- * GPIO keys
- ******************************************************************************/
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-static struct gpio_keys_button z2_pxa_buttons[] = {
-	{
-		.code		= KEY_POWER,
-		.gpio		= GPIO1_ZIPITZ2_POWER_BUTTON,
-		.active_low	= 0,
-		.desc		= "Power Button",
-		.wakeup		= 1,
-		.type		= EV_KEY,
-	},
-	{
-		.code		= SW_LID,
-		.gpio		= GPIO98_ZIPITZ2_LID_BUTTON,
-		.active_low	= 1,
-		.desc		= "Lid Switch",
-		.wakeup		= 0,
-		.type		= EV_SW,
-	},
-};
-
-static struct gpio_keys_platform_data z2_pxa_keys_data = {
-	.buttons	= z2_pxa_buttons,
-	.nbuttons	= ARRAY_SIZE(z2_pxa_buttons),
-};
-
-static struct platform_device z2_pxa_keys = {
-	.name	= "gpio-keys",
-	.id	= -1,
-	.dev	= {
-		.platform_data = &z2_pxa_keys_data,
-	},
-};
-
-static void __init z2_keys_init(void)
-{
-	platform_device_register(&z2_pxa_keys);
-}
-#else
-static inline void z2_keys_init(void) {}
-#endif
-
-/******************************************************************************
- * Battery
- ******************************************************************************/
-#if defined(CONFIG_I2C_PXA) || defined(CONFIG_I2C_PXA_MODULE)
-static struct z2_battery_info batt_chip_info = {
-	.batt_I2C_bus	= 0,
-	.batt_I2C_addr	= 0x55,
-	.batt_I2C_reg	= 2,
-	.charge_gpio	= GPIO0_ZIPITZ2_AC_DETECT,
-	.min_voltage	= 3475000,
-	.max_voltage	= 4190000,
-	.batt_div	= 59,
-	.batt_mult	= 1000000,
-	.batt_tech	= POWER_SUPPLY_TECHNOLOGY_LION,
-	.batt_name	= "Z2",
-};
-
-static struct i2c_board_info __initdata z2_i2c_board_info[] = {
-	{
-		I2C_BOARD_INFO("aer915", 0x55),
-		.platform_data	= &batt_chip_info,
-	}, {
-		I2C_BOARD_INFO("wm8750", 0x1b),
-	},
-
-};
-
-static void __init z2_i2c_init(void)
-{
-	pxa_set_i2c_info(NULL);
-	i2c_register_board_info(0, ARRAY_AND_SIZE(z2_i2c_board_info));
-}
-#else
-static inline void z2_i2c_init(void) {}
-#endif
-
-/******************************************************************************
- * SSP Devices - WiFi and LCD control
- ******************************************************************************/
-#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE)
-/* WiFi */
-static int z2_lbs_spi_setup(struct spi_device *spi)
-{
-	int ret = 0;
-
-	ret = gpio_request(GPIO14_ZIPITZ2_WIFI_POWER, "WiFi Power");
-	if (ret)
-		goto err;
-
-	ret = gpio_direction_output(GPIO14_ZIPITZ2_WIFI_POWER, 1);
-	if (ret)
-		goto err2;
-
-	/* Wait until card is powered on */
-	mdelay(180);
-
-	spi->bits_per_word = 16;
-	spi->mode = SPI_MODE_2,
-
-	spi_setup(spi);
-
-	return 0;
-
-err2:
-	gpio_free(GPIO14_ZIPITZ2_WIFI_POWER);
-err:
-	return ret;
-};
-
-static int z2_lbs_spi_teardown(struct spi_device *spi)
-{
-	gpio_set_value(GPIO14_ZIPITZ2_WIFI_POWER, 0);
-	gpio_free(GPIO14_ZIPITZ2_WIFI_POWER);
-
-	return 0;
-};
-
-static struct pxa2xx_spi_chip z2_lbs_chip_info = {
-	.rx_threshold	= 8,
-	.tx_threshold	= 8,
-	.timeout	= 1000,
-	.gpio_cs	= GPIO24_ZIPITZ2_WIFI_CS,
-};
-
-static struct libertas_spi_platform_data z2_lbs_pdata = {
-	.use_dummy_writes	= 1,
-	.setup			= z2_lbs_spi_setup,
-	.teardown		= z2_lbs_spi_teardown,
-};
-
-/* LCD */
-static struct pxa2xx_spi_chip lms283_chip_info = {
-	.rx_threshold	= 1,
-	.tx_threshold	= 1,
-	.timeout	= 64,
-	.gpio_cs	= GPIO88_ZIPITZ2_LCD_CS,
-};
-
-static const struct lms283gf05_pdata lms283_pdata = {
-	.reset_gpio	= GPIO19_ZIPITZ2_LCD_RESET,
-};
-
-static struct spi_board_info spi_board_info[] __initdata = {
-{
-	.modalias		= "libertas_spi",
-	.platform_data		= &z2_lbs_pdata,
-	.controller_data	= &z2_lbs_chip_info,
-	.irq			= PXA_GPIO_TO_IRQ(GPIO36_ZIPITZ2_WIFI_IRQ),
-	.max_speed_hz		= 13000000,
-	.bus_num		= 1,
-	.chip_select		= 0,
-},
-{
-	.modalias		= "lms283gf05",
-	.controller_data	= &lms283_chip_info,
-	.platform_data		= &lms283_pdata,
-	.max_speed_hz		= 400000,
-	.bus_num		= 2,
-	.chip_select		= 0,
-},
-};
-
-static struct pxa2xx_spi_master pxa_ssp1_master_info = {
-	.clock_enable	= CKEN_SSP,
-	.num_chipselect	= 1,
-	.enable_dma	= 1,
-};
-
-static struct pxa2xx_spi_master pxa_ssp2_master_info = {
-	.clock_enable	= CKEN_SSP2,
-	.num_chipselect	= 1,
-};
-
-static void __init z2_spi_init(void)
-{
-	pxa2xx_set_spi_info(1, &pxa_ssp1_master_info);
-	pxa2xx_set_spi_info(2, &pxa_ssp2_master_info);
-	spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
-}
-#else
-static inline void z2_spi_init(void) {}
-#endif
-
-/******************************************************************************
- * Core power regulator
- ******************************************************************************/
-#if defined(CONFIG_REGULATOR_TPS65023) || \
-	defined(CONFIG_REGULATOR_TPS65023_MODULE)
-static struct regulator_consumer_supply z2_tps65021_consumers[] = {
-	{
-		.supply	= "vcc_core",
-	}
-};
-
-static struct regulator_init_data z2_tps65021_info[] = {
-	{
-		.constraints = {
-			.name		= "vcc_core range",
-			.min_uV		= 800000,
-			.max_uV		= 1600000,
-			.always_on	= 1,
-			.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE,
-		},
-		.consumer_supplies	= z2_tps65021_consumers,
-		.num_consumer_supplies	= ARRAY_SIZE(z2_tps65021_consumers),
-	}, {
-		.constraints = {
-			.name		= "DCDC2",
-			.min_uV		= 3300000,
-			.max_uV		= 3300000,
-			.always_on	= 1,
-		},
-	}, {
-		.constraints = {
-			.name		= "DCDC3",
-			.min_uV		= 1800000,
-			.max_uV		= 1800000,
-			.always_on	= 1,
-		},
-	}, {
-		.constraints = {
-			.name		= "LDO1",
-			.min_uV		= 1000000,
-			.max_uV		= 3150000,
-			.always_on	= 1,
-		},
-	}, {
-		.constraints = {
-			.name		= "LDO2",
-			.min_uV		= 1050000,
-			.max_uV		= 3300000,
-			.always_on	= 1,
-		},
-	}
-};
-
-static struct i2c_board_info __initdata z2_pi2c_board_info[] = {
-	{
-		I2C_BOARD_INFO("tps65021", 0x48),
-		.platform_data	= &z2_tps65021_info,
-	},
-};
-
-static void __init z2_pmic_init(void)
-{
-	pxa27x_set_i2c_power_info(NULL);
-	i2c_register_board_info(1, ARRAY_AND_SIZE(z2_pi2c_board_info));
-}
-#else
-static inline void z2_pmic_init(void) {}
-#endif
-
-#ifdef CONFIG_PM
-static void z2_power_off(void)
-{
-	/* We're using deep sleep as poweroff, so clear PSPR to ensure that
-	 * bootloader will jump to its entry point in resume handler
-	 */
-	PSPR = 0x0;
-	local_irq_disable();
-	pxa27x_set_pwrmode(PWRMODE_DEEPSLEEP);
-	pxa27x_cpu_pm_enter(PM_SUSPEND_MEM);
-}
-#else
-#define z2_power_off   NULL
-#endif
-
-/******************************************************************************
- * Machine init
- ******************************************************************************/
-static void __init z2_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(z2_pin_config));
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	z2_lcd_init();
-	z2_mmc_init();
-	z2_mkp_init();
-	z2_i2c_init();
-	z2_spi_init();
-	z2_nor_init();
-	z2_pwm_init();
-	z2_leds_init();
-	z2_keys_init();
-	z2_pmic_init();
-
-	pm_power_off = z2_power_off;
-}
-
-MACHINE_START(ZIPIT2, "Zipit Z2")
-	.atag_offset	= 0x100,
-	.map_io		= pxa27x_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa27x_init_irq,
-	.handle_irq	= pxa27x_handle_irq,
-	.timer		= &pxa_timer,
-	.init_machine	= z2_init,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/zeus.c b/ANDROID_3.4.5/arch/arm/mach-pxa/zeus.c
deleted file mode 100644
index af3d4f76..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/zeus.c
+++ /dev/null
@@ -1,917 +0,0 @@
-/*
- *  Support for the Arcom ZEUS.
- *
- *  Copyright (C) 2006 Arcom Control Systems Ltd.
- *
- *  Loosely based on Arcom's 2.6.16.28.
- *  Maintained by Marc Zyngier <maz@misterjones.org>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#include <linux/cpufreq.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/pm.h>
-#include <linux/gpio.h>
-#include <linux/serial_8250.h>
-#include <linux/dm9000.h>
-#include <linux/mmc/host.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/pxa2xx_spi.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/i2c.h>
-#include <linux/i2c/pxa-i2c.h>
-#include <linux/i2c/pca953x.h>
-#include <linux/apm-emulation.h>
-#include <linux/can/platform/mcp251x.h>
-
-#include <asm/mach-types.h>
-#include <asm/suspend.h>
-#include <asm/system_info.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <mach/pxa27x.h>
-#include <mach/regs-uart.h>
-#include <mach/ohci.h>
-#include <mach/mmc.h>
-#include <mach/pxa27x-udc.h>
-#include <mach/udc.h>
-#include <mach/pxafb.h>
-#include <mach/pm.h>
-#include <mach/audio.h>
-#include <mach/arcom-pcmcia.h>
-#include <mach/zeus.h>
-#include <mach/smemc.h>
-
-#include "generic.h"
-
-/*
- * Interrupt handling
- */
-
-static unsigned long zeus_irq_enabled_mask;
-static const int zeus_isa_irqs[] = { 3, 4, 5, 6, 7, 10, 11, 12, };
-static const int zeus_isa_irq_map[] = {
-	0,		/* ISA irq #0, invalid */
-	0,		/* ISA irq #1, invalid */
-	0,		/* ISA irq #2, invalid */
-	1 << 0,		/* ISA irq #3 */
-	1 << 1,		/* ISA irq #4 */
-	1 << 2,		/* ISA irq #5 */
-	1 << 3,		/* ISA irq #6 */
-	1 << 4,		/* ISA irq #7 */
-	0,		/* ISA irq #8, invalid */
-	0,		/* ISA irq #9, invalid */
-	1 << 5,		/* ISA irq #10 */
-	1 << 6,		/* ISA irq #11 */
-	1 << 7,		/* ISA irq #12 */
-};
-
-static inline int zeus_irq_to_bitmask(unsigned int irq)
-{
-	return zeus_isa_irq_map[irq - PXA_ISA_IRQ(0)];
-}
-
-static inline int zeus_bit_to_irq(int bit)
-{
-	return zeus_isa_irqs[bit] + PXA_ISA_IRQ(0);
-}
-
-static void zeus_ack_irq(struct irq_data *d)
-{
-	__raw_writew(zeus_irq_to_bitmask(d->irq), ZEUS_CPLD_ISA_IRQ);
-}
-
-static void zeus_mask_irq(struct irq_data *d)
-{
-	zeus_irq_enabled_mask &= ~(zeus_irq_to_bitmask(d->irq));
-}
-
-static void zeus_unmask_irq(struct irq_data *d)
-{
-	zeus_irq_enabled_mask |= zeus_irq_to_bitmask(d->irq);
-}
-
-static inline unsigned long zeus_irq_pending(void)
-{
-	return __raw_readw(ZEUS_CPLD_ISA_IRQ) & zeus_irq_enabled_mask;
-}
-
-static void zeus_irq_handler(unsigned int irq, struct irq_desc *desc)
-{
-	unsigned long pending;
-
-	pending = zeus_irq_pending();
-	do {
-		/* we're in a chained irq handler,
-		 * so ack the interrupt by hand */
-		desc->irq_data.chip->irq_ack(&desc->irq_data);
-
-		if (likely(pending)) {
-			irq = zeus_bit_to_irq(__ffs(pending));
-			generic_handle_irq(irq);
-		}
-		pending = zeus_irq_pending();
-	} while (pending);
-}
-
-static struct irq_chip zeus_irq_chip = {
-	.name		= "ISA",
-	.irq_ack	= zeus_ack_irq,
-	.irq_mask	= zeus_mask_irq,
-	.irq_unmask	= zeus_unmask_irq,
-};
-
-static void __init zeus_init_irq(void)
-{
-	int level;
-	int isa_irq;
-
-	pxa27x_init_irq();
-
-	/* Peripheral IRQs. It would be nice to move those inside driver
-	   configuration, but it is not supported at the moment. */
-	irq_set_irq_type(gpio_to_irq(ZEUS_AC97_GPIO), IRQ_TYPE_EDGE_RISING);
-	irq_set_irq_type(gpio_to_irq(ZEUS_WAKEUP_GPIO), IRQ_TYPE_EDGE_RISING);
-	irq_set_irq_type(gpio_to_irq(ZEUS_PTT_GPIO), IRQ_TYPE_EDGE_RISING);
-	irq_set_irq_type(gpio_to_irq(ZEUS_EXTGPIO_GPIO),
-			 IRQ_TYPE_EDGE_FALLING);
-	irq_set_irq_type(gpio_to_irq(ZEUS_CAN_GPIO), IRQ_TYPE_EDGE_FALLING);
-
-	/* Setup ISA IRQs */
-	for (level = 0; level < ARRAY_SIZE(zeus_isa_irqs); level++) {
-		isa_irq = zeus_bit_to_irq(level);
-		irq_set_chip_and_handler(isa_irq, &zeus_irq_chip,
-					 handle_edge_irq);
-		set_irq_flags(isa_irq, IRQF_VALID | IRQF_PROBE);
-	}
-
-	irq_set_irq_type(gpio_to_irq(ZEUS_ISA_GPIO), IRQ_TYPE_EDGE_RISING);
-	irq_set_chained_handler(gpio_to_irq(ZEUS_ISA_GPIO), zeus_irq_handler);
-}
-
-
-/*
- * Platform devices
- */
-
-/* Flash */
-static struct resource zeus_mtd_resources[] = {
-	[0] = { /* NOR Flash (up to 64MB) */
-		.start	= ZEUS_FLASH_PHYS,
-		.end	= ZEUS_FLASH_PHYS + SZ_64M - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = { /* SRAM */
-		.start	= ZEUS_SRAM_PHYS,
-		.end	= ZEUS_SRAM_PHYS + SZ_512K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct physmap_flash_data zeus_flash_data[] = {
-	[0] = {
-		.width		= 2,
-		.parts		= NULL,
-		.nr_parts	= 0,
-	},
-};
-
-static struct platform_device zeus_mtd_devices[] = {
-	[0] = {
-		.name		= "physmap-flash",
-		.id		= 0,
-		.dev		= {
-			.platform_data = &zeus_flash_data[0],
-		},
-		.resource	= &zeus_mtd_resources[0],
-		.num_resources	= 1,
-	},
-};
-
-/* Serial */
-static struct resource zeus_serial_resources[] = {
-	{
-		.start	= 0x10000000,
-		.end	= 0x1000000f,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= 0x10800000,
-		.end	= 0x1080000f,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= 0x11000000,
-		.end	= 0x1100000f,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= 0x40100000,
-		.end	= 0x4010001f,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= 0x40200000,
-		.end	= 0x4020001f,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= 0x40700000,
-		.end	= 0x4070001f,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct plat_serial8250_port serial_platform_data[] = {
-	/* External UARTs */
-	/* FIXME: Shared IRQs on COM1-COM4 will not work properly on v1i1 hardware. */
-	{ /* COM1 */
-		.mapbase	= 0x10000000,
-		.irq		= PXA_GPIO_TO_IRQ(ZEUS_UARTA_GPIO),
-		.irqflags	= IRQF_TRIGGER_RISING,
-		.uartclk	= 14745600,
-		.regshift	= 1,
-		.flags		= UPF_IOREMAP | UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-		.iotype		= UPIO_MEM,
-	},
-	{ /* COM2 */
-		.mapbase	= 0x10800000,
-		.irq		= PXA_GPIO_TO_IRQ(ZEUS_UARTB_GPIO),
-		.irqflags	= IRQF_TRIGGER_RISING,
-		.uartclk	= 14745600,
-		.regshift	= 1,
-		.flags		= UPF_IOREMAP | UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-		.iotype		= UPIO_MEM,
-	},
-	{ /* COM3 */
-		.mapbase	= 0x11000000,
-		.irq		= PXA_GPIO_TO_IRQ(ZEUS_UARTC_GPIO),
-		.irqflags	= IRQF_TRIGGER_RISING,
-		.uartclk	= 14745600,
-		.regshift	= 1,
-		.flags		= UPF_IOREMAP | UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-		.iotype		= UPIO_MEM,
-	},
-	{ /* COM4 */
-		.mapbase	= 0x11800000,
-		.irq		= PXA_GPIO_TO_IRQ(ZEUS_UARTD_GPIO),
-		.irqflags	= IRQF_TRIGGER_RISING,
-		.uartclk	= 14745600,
-		.regshift	= 1,
-		.flags		= UPF_IOREMAP | UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-		.iotype		= UPIO_MEM,
-	},
-	/* Internal UARTs */
-	{ /* FFUART */
-		.membase	= (void *)&FFUART,
-		.mapbase	= __PREG(FFUART),
-		.irq		= IRQ_FFUART,
-		.uartclk	= 921600 * 16,
-		.regshift	= 2,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-		.iotype		= UPIO_MEM,
-	},
-	{ /* BTUART */
-		.membase	= (void *)&BTUART,
-		.mapbase	= __PREG(BTUART),
-		.irq		= IRQ_BTUART,
-		.uartclk	= 921600 * 16,
-		.regshift	= 2,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-		.iotype		= UPIO_MEM,
-	},
-	{ /* STUART */
-		.membase	= (void *)&STUART,
-		.mapbase	= __PREG(STUART),
-		.irq		= IRQ_STUART,
-		.uartclk	= 921600 * 16,
-		.regshift	= 2,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-		.iotype		= UPIO_MEM,
-	},
-	{ },
-};
-
-static struct platform_device zeus_serial_device = {
-	.name = "serial8250",
-	.id   = PLAT8250_DEV_PLATFORM,
-	.dev  = {
-		.platform_data = serial_platform_data,
-	},
-	.num_resources	= ARRAY_SIZE(zeus_serial_resources),
-	.resource	= zeus_serial_resources,
-};
-
-/* Ethernet */
-static struct resource zeus_dm9k0_resource[] = {
-	[0] = {
-		.start = ZEUS_ETH0_PHYS,
-		.end   = ZEUS_ETH0_PHYS + 1,
-		.flags = IORESOURCE_MEM
-	},
-	[1] = {
-		.start = ZEUS_ETH0_PHYS + 2,
-		.end   = ZEUS_ETH0_PHYS + 3,
-		.flags = IORESOURCE_MEM
-	},
-	[2] = {
-		.start = PXA_GPIO_TO_IRQ(ZEUS_ETH0_GPIO),
-		.end   = PXA_GPIO_TO_IRQ(ZEUS_ETH0_GPIO),
-		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
-	},
-};
-
-static struct resource zeus_dm9k1_resource[] = {
-	[0] = {
-		.start = ZEUS_ETH1_PHYS,
-		.end   = ZEUS_ETH1_PHYS + 1,
-		.flags = IORESOURCE_MEM
-	},
-	[1] = {
-		.start = ZEUS_ETH1_PHYS + 2,
-		.end   = ZEUS_ETH1_PHYS + 3,
-		.flags = IORESOURCE_MEM,
-	},
-	[2] = {
-		.start = PXA_GPIO_TO_IRQ(ZEUS_ETH1_GPIO),
-		.end   = PXA_GPIO_TO_IRQ(ZEUS_ETH1_GPIO),
-		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
-	},
-};
-
-static struct dm9000_plat_data zeus_dm9k_platdata = {
-	.flags		= DM9000_PLATF_16BITONLY,
-};
-
-static struct platform_device zeus_dm9k0_device = {
-	.name		= "dm9000",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(zeus_dm9k0_resource),
-	.resource	= zeus_dm9k0_resource,
-	.dev		= {
-		.platform_data = &zeus_dm9k_platdata,
-	}
-};
-
-static struct platform_device zeus_dm9k1_device = {
-	.name		= "dm9000",
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(zeus_dm9k1_resource),
-	.resource	= zeus_dm9k1_resource,
-	.dev		= {
-		.platform_data = &zeus_dm9k_platdata,
-	}
-};
-
-/* External SRAM */
-static struct resource zeus_sram_resource = {
-	.start		= ZEUS_SRAM_PHYS,
-	.end		= ZEUS_SRAM_PHYS + ZEUS_SRAM_SIZE * 2 - 1,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device zeus_sram_device = {
-	.name		= "pxa2xx-8bit-sram",
-	.id		= 0,
-	.num_resources	= 1,
-	.resource	= &zeus_sram_resource,
-};
-
-/* SPI interface on SSP3 */
-static struct pxa2xx_spi_master pxa2xx_spi_ssp3_master_info = {
-	.num_chipselect = 1,
-	.enable_dma     = 1,
-};
-
-/* CAN bus on SPI */
-static int zeus_mcp2515_setup(struct spi_device *sdev)
-{
-	int err;
-
-	err = gpio_request(ZEUS_CAN_SHDN_GPIO, "CAN shutdown");
-	if (err)
-		return err;
-
-	err = gpio_direction_output(ZEUS_CAN_SHDN_GPIO, 1);
-	if (err) {
-		gpio_free(ZEUS_CAN_SHDN_GPIO);
-		return err;
-	}
-
-	return 0;
-}
-
-static int zeus_mcp2515_transceiver_enable(int enable)
-{
-	gpio_set_value(ZEUS_CAN_SHDN_GPIO, !enable);
-	return 0;
-}
-
-static struct mcp251x_platform_data zeus_mcp2515_pdata = {
-	.oscillator_frequency	= 16*1000*1000,
-	.board_specific_setup	= zeus_mcp2515_setup,
-	.power_enable		= zeus_mcp2515_transceiver_enable,
-};
-
-static struct spi_board_info zeus_spi_board_info[] = {
-	[0] = {
-		.modalias	= "mcp2515",
-		.platform_data	= &zeus_mcp2515_pdata,
-		.irq		= PXA_GPIO_TO_IRQ(ZEUS_CAN_GPIO),
-		.max_speed_hz	= 1*1000*1000,
-		.bus_num	= 3,
-		.mode		= SPI_MODE_0,
-		.chip_select	= 0,
-	},
-};
-
-/* Leds */
-static struct gpio_led zeus_leds[] = {
-	[0] = {
-		.name		 = "zeus:yellow:1",
-		.default_trigger = "heartbeat",
-		.gpio		 = ZEUS_EXT0_GPIO(3),
-		.active_low	 = 1,
-	},
-	[1] = {
-		.name		 = "zeus:yellow:2",
-		.default_trigger = "default-on",
-		.gpio		 = ZEUS_EXT0_GPIO(4),
-		.active_low	 = 1,
-	},
-	[2] = {
-		.name		 = "zeus:yellow:3",
-		.default_trigger = "default-on",
-		.gpio		 = ZEUS_EXT0_GPIO(5),
-		.active_low	 = 1,
-	},
-};
-
-static struct gpio_led_platform_data zeus_leds_info = {
-	.leds		= zeus_leds,
-	.num_leds	= ARRAY_SIZE(zeus_leds),
-};
-
-static struct platform_device zeus_leds_device = {
-	.name		= "leds-gpio",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &zeus_leds_info,
-	},
-};
-
-static void zeus_cf_reset(int state)
-{
-	u16 cpld_state = __raw_readw(ZEUS_CPLD_CONTROL);
-
-	if (state)
-		cpld_state |= ZEUS_CPLD_CONTROL_CF_RST;
-	else
-		cpld_state &= ~ZEUS_CPLD_CONTROL_CF_RST;
-
-	__raw_writew(cpld_state, ZEUS_CPLD_CONTROL);
-}
-
-static struct arcom_pcmcia_pdata zeus_pcmcia_info = {
-	.cd_gpio	= ZEUS_CF_CD_GPIO,
-	.rdy_gpio	= ZEUS_CF_RDY_GPIO,
-	.pwr_gpio	= ZEUS_CF_PWEN_GPIO,
-	.reset		= zeus_cf_reset,
-};
-
-static struct platform_device zeus_pcmcia_device = {
-	.name		= "zeus-pcmcia",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &zeus_pcmcia_info,
-	},
-};
-
-static struct resource zeus_max6369_resource = {
-	.start		= ZEUS_CPLD_EXTWDOG_PHYS,
-	.end		= ZEUS_CPLD_EXTWDOG_PHYS,
-	.flags		= IORESOURCE_MEM,
-};
-
-struct platform_device zeus_max6369_device = {
-	.name		= "max6369_wdt",
-	.id		= -1,
-	.resource	= &zeus_max6369_resource,
-	.num_resources	= 1,
-};
-
-static struct platform_device *zeus_devices[] __initdata = {
-	&zeus_serial_device,
-	&zeus_mtd_devices[0],
-	&zeus_dm9k0_device,
-	&zeus_dm9k1_device,
-	&zeus_sram_device,
-	&zeus_leds_device,
-	&zeus_pcmcia_device,
-	&zeus_max6369_device,
-};
-
-/* AC'97 */
-static pxa2xx_audio_ops_t zeus_ac97_info = {
-	.reset_gpio = 95,
-};
-
-
-/*
- * USB host
- */
-
-static int zeus_ohci_init(struct device *dev)
-{
-	int err;
-
-	/* Switch on port 2. */
-	if ((err = gpio_request(ZEUS_USB2_PWREN_GPIO, "USB2_PWREN"))) {
-		dev_err(dev, "Can't request USB2_PWREN\n");
-		return err;
-	}
-
-	if ((err = gpio_direction_output(ZEUS_USB2_PWREN_GPIO, 1))) {
-		gpio_free(ZEUS_USB2_PWREN_GPIO);
-		dev_err(dev, "Can't enable USB2_PWREN\n");
-		return err;
-	}
-
-	/* Port 2 is shared between host and client interface. */
-	UP2OCR = UP2OCR_HXOE | UP2OCR_HXS | UP2OCR_DMPDE | UP2OCR_DPPDE;
-
-	return 0;
-}
-
-static void zeus_ohci_exit(struct device *dev)
-{
-	/* Power-off port 2 */
-	gpio_direction_output(ZEUS_USB2_PWREN_GPIO, 0);
-	gpio_free(ZEUS_USB2_PWREN_GPIO);
-}
-
-static struct pxaohci_platform_data zeus_ohci_platform_data = {
-	.port_mode	= PMM_NPS_MODE,
-	/* Clear Power Control Polarity Low and set Power Sense
-	 * Polarity Low. Supply power to USB ports. */
-	.flags		= ENABLE_PORT_ALL | POWER_SENSE_LOW,
-	.init		= zeus_ohci_init,
-	.exit		= zeus_ohci_exit,
-};
-
-/*
- * Flat Panel
- */
-
-static void zeus_lcd_power(int on, struct fb_var_screeninfo *si)
-{
-	gpio_set_value(ZEUS_LCD_EN_GPIO, on);
-}
-
-static void zeus_backlight_power(int on)
-{
-	gpio_set_value(ZEUS_BKLEN_GPIO, on);
-}
-
-static int zeus_setup_fb_gpios(void)
-{
-	int err;
-
-	if ((err = gpio_request(ZEUS_LCD_EN_GPIO, "LCD_EN")))
-		goto out_err;
-
-	if ((err = gpio_direction_output(ZEUS_LCD_EN_GPIO, 0)))
-		goto out_err_lcd;
-
-	if ((err = gpio_request(ZEUS_BKLEN_GPIO, "BKLEN")))
-		goto out_err_lcd;
-
-	if ((err = gpio_direction_output(ZEUS_BKLEN_GPIO, 0)))
-		goto out_err_bkl;
-
-	return 0;
-
-out_err_bkl:
-	gpio_free(ZEUS_BKLEN_GPIO);
-out_err_lcd:
-	gpio_free(ZEUS_LCD_EN_GPIO);
-out_err:
-	return err;
-}
-
-static struct pxafb_mode_info zeus_fb_mode_info[] = {
-	{
-		.pixclock       = 39722,
-
-		.xres           = 640,
-		.yres           = 480,
-
-		.bpp            = 16,
-
-		.hsync_len      = 63,
-		.left_margin    = 16,
-		.right_margin   = 81,
-
-		.vsync_len      = 2,
-		.upper_margin   = 12,
-		.lower_margin   = 31,
-
-		.sync		= 0,
-	},
-};
-
-static struct pxafb_mach_info zeus_fb_info = {
-	.modes			= zeus_fb_mode_info,
-	.num_modes		= 1,
-	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
-	.pxafb_lcd_power	= zeus_lcd_power,
-	.pxafb_backlight_power	= zeus_backlight_power,
-};
-
-/*
- * MMC/SD Device
- *
- * The card detect interrupt isn't debounced so we delay it by 250ms
- * to give the card a chance to fully insert/eject.
- */
-
-static struct pxamci_platform_data zeus_mci_platform_data = {
-	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
-	.detect_delay_ms	= 250,
-	.gpio_card_detect       = ZEUS_MMC_CD_GPIO,
-	.gpio_card_ro           = ZEUS_MMC_WP_GPIO,
-	.gpio_card_ro_invert	= 1,
-	.gpio_power             = -1
-};
-
-/*
- * USB Device Controller
- */
-static void zeus_udc_command(int cmd)
-{
-	switch (cmd) {
-	case PXA2XX_UDC_CMD_DISCONNECT:
-		pr_info("zeus: disconnecting USB client\n");
-		UP2OCR = UP2OCR_HXOE | UP2OCR_HXS | UP2OCR_DMPDE | UP2OCR_DPPDE;
-		break;
-
-	case PXA2XX_UDC_CMD_CONNECT:
-		pr_info("zeus: connecting USB client\n");
-		UP2OCR = UP2OCR_HXOE | UP2OCR_DPPUE;
-		break;
-	}
-}
-
-static struct pxa2xx_udc_mach_info zeus_udc_info = {
-	.udc_command = zeus_udc_command,
-};
-
-#ifdef CONFIG_PM
-static void zeus_power_off(void)
-{
-	local_irq_disable();
-	cpu_suspend(PWRMODE_DEEPSLEEP, pxa27x_finish_suspend);
-}
-#else
-#define zeus_power_off   NULL
-#endif
-
-#ifdef CONFIG_APM_EMULATION
-static void zeus_get_power_status(struct apm_power_info *info)
-{
-	/* Power supply is always present */
-	info->ac_line_status	= APM_AC_ONLINE;
-	info->battery_status	= APM_BATTERY_STATUS_NOT_PRESENT;
-	info->battery_flag	= APM_BATTERY_FLAG_NOT_PRESENT;
-}
-
-static inline void zeus_setup_apm(void)
-{
-	apm_get_power_status = zeus_get_power_status;
-}
-#else
-static inline void zeus_setup_apm(void)
-{
-}
-#endif
-
-static int zeus_get_pcb_info(struct i2c_client *client, unsigned gpio,
-			     unsigned ngpio, void *context)
-{
-	int i;
-	u8 pcb_info = 0;
-
-	for (i = 0; i < 8; i++) {
-		int pcb_bit = gpio + i + 8;
-
-		if (gpio_request(pcb_bit, "pcb info")) {
-			dev_err(&client->dev, "Can't request pcb info %d\n", i);
-			continue;
-		}
-
-		if (gpio_direction_input(pcb_bit)) {
-			dev_err(&client->dev, "Can't read pcb info %d\n", i);
-			gpio_free(pcb_bit);
-			continue;
-		}
-
-		pcb_info |= !!gpio_get_value(pcb_bit) << i;
-
-		gpio_free(pcb_bit);
-	}
-
-	dev_info(&client->dev, "Zeus PCB version %d issue %d\n",
-		 pcb_info >> 4, pcb_info & 0xf);
-
-	return 0;
-}
-
-static struct pca953x_platform_data zeus_pca953x_pdata[] = {
-	[0] = { .gpio_base	= ZEUS_EXT0_GPIO_BASE, },
-	[1] = {
-		.gpio_base	= ZEUS_EXT1_GPIO_BASE,
-		.setup		= zeus_get_pcb_info,
-	},
-	[2] = { .gpio_base = ZEUS_USER_GPIO_BASE, },
-};
-
-static struct i2c_board_info __initdata zeus_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("pca9535",	0x21),
-		.platform_data	= &zeus_pca953x_pdata[0],
-	},
-	{
-		I2C_BOARD_INFO("pca9535",	0x22),
-		.platform_data	= &zeus_pca953x_pdata[1],
-	},
-	{
-		I2C_BOARD_INFO("pca9535",	0x20),
-		.platform_data	= &zeus_pca953x_pdata[2],
-		.irq		= PXA_GPIO_TO_IRQ(ZEUS_EXTGPIO_GPIO),
-	},
-	{ I2C_BOARD_INFO("lm75a",	0x48) },
-	{ I2C_BOARD_INFO("24c01",	0x50) },
-	{ I2C_BOARD_INFO("isl1208",	0x6f) },
-};
-
-static mfp_cfg_t zeus_pin_config[] __initdata = {
-	/* AC97 */
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-
-	GPIO15_nCS_1,
-	GPIO78_nCS_2,
-	GPIO80_nCS_4,
-	GPIO33_nCS_5,
-
-	GPIO22_GPIO,
-	GPIO32_MMC_CLK,
-	GPIO92_MMC_DAT_0,
-	GPIO109_MMC_DAT_1,
-	GPIO110_MMC_DAT_2,
-	GPIO111_MMC_DAT_3,
-	GPIO112_MMC_CMD,
-
-	GPIO88_USBH1_PWR,
-	GPIO89_USBH1_PEN,
-	GPIO119_USBH2_PWR,
-	GPIO120_USBH2_PEN,
-
-	GPIO86_LCD_LDD_16,
-	GPIO87_LCD_LDD_17,
-
-	GPIO102_GPIO,
-	GPIO104_CIF_DD_2,
-	GPIO105_CIF_DD_1,
-
-	GPIO81_SSP3_TXD,
-	GPIO82_SSP3_RXD,
-	GPIO83_SSP3_SFRM,
-	GPIO84_SSP3_SCLK,
-
-	GPIO48_nPOE,
-	GPIO49_nPWE,
-	GPIO50_nPIOR,
-	GPIO51_nPIOW,
-	GPIO85_nPCE_1,
-	GPIO54_nPCE_2,
-	GPIO79_PSKTSEL,
-	GPIO55_nPREG,
-	GPIO56_nPWAIT,
-	GPIO57_nIOIS16,
-	GPIO36_GPIO,		/* CF CD */
-	GPIO97_GPIO,		/* CF PWREN */
-	GPIO99_GPIO,		/* CF RDY */
-};
-
-/*
- * DM9k MSCx settings:	SRAM, 16 bits
- *			17 cycles delay first access
- *			 5 cycles delay next access
- *			13 cycles recovery time
- *			faster device
- */
-#define DM9K_MSC_VALUE		0xe4c9
-
-static void __init zeus_init(void)
-{
-	u16 dm9000_msc = DM9K_MSC_VALUE;
-	u32 msc0, msc1;
-
-	system_rev = __raw_readw(ZEUS_CPLD_VERSION);
-	pr_info("Zeus CPLD V%dI%d\n", (system_rev & 0xf0) >> 4, (system_rev & 0x0f));
-
-	/* Fix timings for dm9000s (CS1/CS2)*/
-	msc0 = (__raw_readl(MSC0) & 0x0000ffff) | (dm9000_msc << 16);
-	msc1 = (__raw_readl(MSC1) & 0xffff0000) | dm9000_msc;
-	__raw_writel(msc0, MSC0);
-	__raw_writel(msc1, MSC1);
-
-	pm_power_off = zeus_power_off;
-	zeus_setup_apm();
-
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(zeus_pin_config));
-
-	platform_add_devices(zeus_devices, ARRAY_SIZE(zeus_devices));
-
-	pxa_set_ohci_info(&zeus_ohci_platform_data);
-
-	if (zeus_setup_fb_gpios())
-		pr_err("Failed to setup fb gpios\n");
-	else
-		pxa_set_fb_info(NULL, &zeus_fb_info);
-
-	pxa_set_mci_info(&zeus_mci_platform_data);
-	pxa_set_udc_info(&zeus_udc_info);
-	pxa_set_ac97_info(&zeus_ac97_info);
-	pxa_set_i2c_info(NULL);
-	i2c_register_board_info(0, ARRAY_AND_SIZE(zeus_i2c_devices));
-	pxa2xx_set_spi_info(3, &pxa2xx_spi_ssp3_master_info);
-	spi_register_board_info(zeus_spi_board_info, ARRAY_SIZE(zeus_spi_board_info));
-}
-
-static struct map_desc zeus_io_desc[] __initdata = {
-	{
-		.virtual = (unsigned long)ZEUS_CPLD_VERSION,
-		.pfn     = __phys_to_pfn(ZEUS_CPLD_VERSION_PHYS),
-		.length  = 0x1000,
-		.type    = MT_DEVICE,
-	},
-	{
-		.virtual = (unsigned long)ZEUS_CPLD_ISA_IRQ,
-		.pfn     = __phys_to_pfn(ZEUS_CPLD_ISA_IRQ_PHYS),
-		.length  = 0x1000,
-		.type    = MT_DEVICE,
-	},
-	{
-		.virtual = (unsigned long)ZEUS_CPLD_CONTROL,
-		.pfn     = __phys_to_pfn(ZEUS_CPLD_CONTROL_PHYS),
-		.length  = 0x1000,
-		.type    = MT_DEVICE,
-	},
-	{
-		.virtual = (unsigned long)ZEUS_PC104IO,
-		.pfn     = __phys_to_pfn(ZEUS_PC104IO_PHYS),
-		.length  = 0x00800000,
-		.type    = MT_DEVICE,
-	},
-};
-
-static void __init zeus_map_io(void)
-{
-	pxa27x_map_io();
-
-	iotable_init(zeus_io_desc, ARRAY_SIZE(zeus_io_desc));
-
-	/* Clear PSPR to ensure a full restart on wake-up. */
-	PMCR = PSPR = 0;
-
-	/* enable internal 32.768Khz oscillator (ignore OSCC_OOK) */
-	OSCC |= OSCC_OON;
-
-	/* Some clock cycles later (from OSCC_ON), programme PCFR (OPDE...).
-	 * float chip selects and PCMCIA */
-	PCFR = PCFR_OPDE | PCFR_DC_EN | PCFR_FS | PCFR_FP;
-}
-
-MACHINE_START(ARCOM_ZEUS, "Arcom/Eurotech ZEUS")
-	/* Maintainer: Marc Zyngier <maz@misterjones.org> */
-	.atag_offset	= 0x100,
-	.map_io		= zeus_map_io,
-	.nr_irqs	= ZEUS_NR_IRQS,
-	.init_irq	= zeus_init_irq,
-	.handle_irq	= pxa27x_handle_irq,
-	.timer		= &pxa_timer,
-	.init_machine	= zeus_init,
-	.restart	= pxa_restart,
-MACHINE_END
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/zylonite.c b/ANDROID_3.4.5/arch/arm/mach-pxa/zylonite.c
deleted file mode 100644
index 98eec806..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/zylonite.c
+++ /dev/null
@@ -1,434 +0,0 @@
-/*
- * linux/arch/arm/mach-pxa/zylonite.c
- *
- * Support for the PXA3xx Development Platform (aka Zylonite)
- *
- * Copyright (C) 2006 Marvell International Ltd.
- *
- * 2007-09-04: eric miao <eric.miao@marvell.com>
- *             rewrite to align with latest kernel
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/pwm_backlight.h>
-#include <linux/smc91x.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/pxa3xx.h>
-#include <mach/audio.h>
-#include <mach/pxafb.h>
-#include <mach/zylonite.h>
-#include <mach/mmc.h>
-#include <mach/ohci.h>
-#include <plat/pxa27x_keypad.h>
-#include <plat/pxa3xx_nand.h>
-
-#include "devices.h"
-#include "generic.h"
-
-int gpio_eth_irq;
-int gpio_debug_led1;
-int gpio_debug_led2;
-
-int wm9713_irq;
-
-int lcd_id;
-int lcd_orientation;
-
-struct platform_device pxa_device_wm9713_audio = {
-	.name		= "wm9713-codec",
-	.id		= -1,
-};
-
-static void __init zylonite_init_wm9713_audio(void)
-{
-	platform_device_register(&pxa_device_wm9713_audio);
-}
-
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.start	= ZYLONITE_ETH_PHYS + 0x300,
-		.end	= ZYLONITE_ETH_PHYS + 0xfffff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= -1,	/* for run-time assignment */
-		.end	= -1,
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	}
-};
-
-static struct smc91x_platdata zylonite_smc91x_info = {
-	.flags	= SMC91X_USE_8BIT | SMC91X_USE_16BIT |
-		  SMC91X_NOWAIT | SMC91X_USE_DMA,
-};
-
-static struct platform_device smc91x_device = {
-	.name		= "smc91x",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(smc91x_resources),
-	.resource	= smc91x_resources,
-	.dev		= {
-		.platform_data = &zylonite_smc91x_info,
-	},
-};
-
-#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
-static struct gpio_led zylonite_debug_leds[] = {
-	[0] = {
-		.name			= "zylonite:yellow:1",
-		.default_trigger	= "heartbeat",
-	},
-	[1] = {
-		.name			= "zylonite:yellow:2",
-		.default_trigger	= "default-on",
-	},
-};
-
-static struct gpio_led_platform_data zylonite_debug_leds_info = {
-	.leds		= zylonite_debug_leds,
-	.num_leds	= ARRAY_SIZE(zylonite_debug_leds),
-};
-
-static struct platform_device zylonite_device_leds = {
-	.name		= "leds-gpio",
-	.id		= -1,
-	.dev		= {
-		.platform_data = &zylonite_debug_leds_info,
-	}
-};
-
-static void __init zylonite_init_leds(void)
-{
-	zylonite_debug_leds[0].gpio = gpio_debug_led1;
-	zylonite_debug_leds[1].gpio = gpio_debug_led2;
-
-	platform_device_register(&zylonite_device_leds);
-}
-#else
-static inline void zylonite_init_leds(void) {}
-#endif
-
-#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
-static struct platform_pwm_backlight_data zylonite_backlight_data = {
-	.pwm_id		= 3,
-	.max_brightness	= 100,
-	.dft_brightness	= 100,
-	.pwm_period_ns	= 10000,
-};
-
-static struct platform_device zylonite_backlight_device = {
-	.name		= "pwm-backlight",
-	.dev		= {
-		.parent = &pxa27x_device_pwm1.dev,
-		.platform_data	= &zylonite_backlight_data,
-	},
-};
-
-static struct pxafb_mode_info toshiba_ltm035a776c_mode = {
-	.pixclock		= 110000,
-	.xres			= 240,
-	.yres			= 320,
-	.bpp			= 16,
-	.hsync_len		= 4,
-	.left_margin		= 6,
-	.right_margin		= 4,
-	.vsync_len		= 2,
-	.upper_margin		= 2,
-	.lower_margin		= 3,
-	.sync			= FB_SYNC_VERT_HIGH_ACT,
-};
-
-static struct pxafb_mode_info toshiba_ltm04c380k_mode = {
-	.pixclock		= 50000,
-	.xres			= 640,
-	.yres			= 480,
-	.bpp			= 16,
-	.hsync_len		= 1,
-	.left_margin		= 0x9f,
-	.right_margin		= 1,
-	.vsync_len		= 44,
-	.upper_margin		= 0,
-	.lower_margin		= 0,
-	.sync			= FB_SYNC_HOR_HIGH_ACT|FB_SYNC_VERT_HIGH_ACT,
-};
-
-static struct pxafb_mach_info zylonite_toshiba_lcd_info = {
-	.num_modes      	= 1,
-	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
-};
-
-static struct pxafb_mode_info sharp_ls037_modes[] = {
-	[0] = {
-		.pixclock	= 158000,
-		.xres		= 240,
-		.yres		= 320,
-		.bpp		= 16,
-		.hsync_len	= 4,
-		.left_margin	= 39,
-		.right_margin	= 39,
-		.vsync_len	= 1,
-		.upper_margin	= 2,
-		.lower_margin	= 3,
-		.sync		= 0,
-	},
-	[1] = {
-		.pixclock	= 39700,
-		.xres		= 480,
-		.yres		= 640,
-		.bpp		= 16,
-		.hsync_len	= 8,
-		.left_margin	= 81,
-		.right_margin	= 81,
-		.vsync_len	= 1,
-		.upper_margin	= 2,
-		.lower_margin	= 7,
-		.sync		= 0,
-	},
-};
-
-static struct pxafb_mach_info zylonite_sharp_lcd_info = {
-	.modes			= sharp_ls037_modes,
-	.num_modes		= 2,
-	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
-};
-
-static void __init zylonite_init_lcd(void)
-{
-	platform_device_register(&zylonite_backlight_device);
-
-	if (lcd_id & 0x20) {
-		pxa_set_fb_info(NULL, &zylonite_sharp_lcd_info);
-		return;
-	}
-
-	/* legacy LCD panels, it would be handy here if LCD panel type can
-	 * be decided at run-time
-	 */
-	if (1)
-		zylonite_toshiba_lcd_info.modes = &toshiba_ltm035a776c_mode;
-	else
-		zylonite_toshiba_lcd_info.modes = &toshiba_ltm04c380k_mode;
-
-	pxa_set_fb_info(NULL, &zylonite_toshiba_lcd_info);
-}
-#else
-static inline void zylonite_init_lcd(void) {}
-#endif
-
-#if defined(CONFIG_MMC)
-static struct pxamci_platform_data zylonite_mci_platform_data = {
-	.detect_delay_ms= 200,
-	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
-	.gpio_card_detect = EXT_GPIO(0),
-	.gpio_card_ro	= EXT_GPIO(2),
-	.gpio_power	= -1,
-};
-
-static struct pxamci_platform_data zylonite_mci2_platform_data = {
-	.detect_delay_ms= 200,
-	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
-	.gpio_card_detect = EXT_GPIO(1),
-	.gpio_card_ro	= EXT_GPIO(3),
-	.gpio_power	= -1,
-};
-
-static struct pxamci_platform_data zylonite_mci3_platform_data = {
-	.detect_delay_ms= 200,
-	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
-	.gpio_card_detect = EXT_GPIO(30),
-	.gpio_card_ro	= EXT_GPIO(31),
-	.gpio_power	= -1,
-};
-
-static void __init zylonite_init_mmc(void)
-{
-	pxa_set_mci_info(&zylonite_mci_platform_data);
-	pxa3xx_set_mci2_info(&zylonite_mci2_platform_data);
-	if (cpu_is_pxa310())
-		pxa3xx_set_mci3_info(&zylonite_mci3_platform_data);
-}
-#else
-static inline void zylonite_init_mmc(void) {}
-#endif
-
-#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
-static unsigned int zylonite_matrix_key_map[] = {
-	/* KEY(row, col, key_code) */
-	KEY(0, 0, KEY_A), KEY(0, 1, KEY_B), KEY(0, 2, KEY_C), KEY(0, 5, KEY_D),
-	KEY(1, 0, KEY_E), KEY(1, 1, KEY_F), KEY(1, 2, KEY_G), KEY(1, 5, KEY_H),
-	KEY(2, 0, KEY_I), KEY(2, 1, KEY_J), KEY(2, 2, KEY_K), KEY(2, 5, KEY_L),
-	KEY(3, 0, KEY_M), KEY(3, 1, KEY_N), KEY(3, 2, KEY_O), KEY(3, 5, KEY_P),
-	KEY(5, 0, KEY_Q), KEY(5, 1, KEY_R), KEY(5, 2, KEY_S), KEY(5, 5, KEY_T),
-	KEY(6, 0, KEY_U), KEY(6, 1, KEY_V), KEY(6, 2, KEY_W), KEY(6, 5, KEY_X),
-	KEY(7, 1, KEY_Y), KEY(7, 2, KEY_Z),
-
-	KEY(4, 4, KEY_0), KEY(1, 3, KEY_1), KEY(4, 1, KEY_2), KEY(1, 4, KEY_3),
-	KEY(2, 3, KEY_4), KEY(4, 2, KEY_5), KEY(2, 4, KEY_6), KEY(3, 3, KEY_7),
-	KEY(4, 3, KEY_8), KEY(3, 4, KEY_9),
-
-	KEY(4, 5, KEY_SPACE),
-	KEY(5, 3, KEY_KPASTERISK), 	/* * */
-	KEY(5, 4, KEY_KPDOT), 		/* #" */
-
-	KEY(0, 7, KEY_UP),
-	KEY(1, 7, KEY_DOWN),
-	KEY(2, 7, KEY_LEFT),
-	KEY(3, 7, KEY_RIGHT),
-	KEY(2, 6, KEY_HOME),
-	KEY(3, 6, KEY_END),
-	KEY(6, 4, KEY_DELETE),
-	KEY(6, 6, KEY_BACK),
-	KEY(6, 3, KEY_CAPSLOCK),	/* KEY_LEFTSHIFT), */
-
-	KEY(4, 6, KEY_ENTER),		/* scroll push */
-	KEY(5, 7, KEY_ENTER),		/* keypad action */
-
-	KEY(0, 4, KEY_EMAIL),
-	KEY(5, 6, KEY_SEND),
-	KEY(4, 0, KEY_CALENDAR),
-	KEY(7, 6, KEY_RECORD),
-	KEY(6, 7, KEY_VOLUMEUP),
-	KEY(7, 7, KEY_VOLUMEDOWN),
-
-	KEY(0, 6, KEY_F22),	/* soft1 */
-	KEY(1, 6, KEY_F23),	/* soft2 */
-	KEY(0, 3, KEY_AUX),	/* contact */
-};
-
-static struct pxa27x_keypad_platform_data zylonite_keypad_info = {
-	.matrix_key_rows	= 8,
-	.matrix_key_cols	= 8,
-	.matrix_key_map		= zylonite_matrix_key_map,
-	.matrix_key_map_size	= ARRAY_SIZE(zylonite_matrix_key_map),
-
-	.enable_rotary0		= 1,
-	.rotary0_up_key		= KEY_UP,
-	.rotary0_down_key	= KEY_DOWN,
-
-	.debounce_interval	= 30,
-};
-
-static void __init zylonite_init_keypad(void)
-{
-	pxa_set_keypad_info(&zylonite_keypad_info);
-}
-#else
-static inline void zylonite_init_keypad(void) {}
-#endif
-
-#if defined(CONFIG_MTD_NAND_PXA3xx) || defined(CONFIG_MTD_NAND_PXA3xx_MODULE)
-static struct mtd_partition zylonite_nand_partitions[] = {
-	[0] = {
-		.name        = "Bootloader",
-		.offset      = 0,
-		.size        = 0x060000,
-		.mask_flags  = MTD_WRITEABLE, /* force read-only */
-	},
-	[1] = {
-		.name        = "Kernel",
-		.offset      = 0x060000,
-		.size        = 0x200000,
-		.mask_flags  = MTD_WRITEABLE, /* force read-only */
-	},
-	[2] = {
-		.name        = "Filesystem",
-		.offset      = 0x0260000,
-		.size        = 0x3000000,     /* 48M - rootfs */
-	},
-	[3] = {
-		.name        = "MassStorage",
-		.offset      = 0x3260000,
-		.size        = 0x3d40000,
-	},
-	[4] = {
-		.name        = "BBT",
-		.offset      = 0x6FA0000,
-		.size        = 0x80000,
-		.mask_flags  = MTD_WRITEABLE,  /* force read-only */
-	},
-	/* NOTE: we reserve some blocks at the end of the NAND flash for
-	 * bad block management, and the max number of relocation blocks
-	 * differs on different platforms. Please take care with it when
-	 * defining the partition table.
-	 */
-};
-
-static struct pxa3xx_nand_platform_data zylonite_nand_info = {
-	.enable_arbiter	= 1,
-	.num_cs		= 1,
-	.parts[0]	= zylonite_nand_partitions,
-	.nr_parts[0]	= ARRAY_SIZE(zylonite_nand_partitions),
-};
-
-static void __init zylonite_init_nand(void)
-{
-	pxa3xx_set_nand_info(&zylonite_nand_info);
-}
-#else
-static inline void zylonite_init_nand(void) {}
-#endif /* CONFIG_MTD_NAND_PXA3xx || CONFIG_MTD_NAND_PXA3xx_MODULE */
-
-#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-static struct pxaohci_platform_data zylonite_ohci_info = {
-	.port_mode	= PMM_PERPORT_MODE,
-	.flags		= ENABLE_PORT1 | ENABLE_PORT2 |
-			  POWER_CONTROL_LOW | POWER_SENSE_LOW,
-};
-
-static void __init zylonite_init_ohci(void)
-{
-	pxa_set_ohci_info(&zylonite_ohci_info);
-}
-#else
-static inline void zylonite_init_ohci(void) {}
-#endif /* CONFIG_USB_OHCI_HCD || CONFIG_USB_OHCI_HCD_MODULE */
-
-static void __init zylonite_init(void)
-{
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	/* board-processor specific initialization */
-	zylonite_pxa300_init();
-	zylonite_pxa320_init();
-
-	/*
-	 * Note: We depend that the bootloader set
-	 * the correct value to MSC register for SMC91x.
-	 */
-	smc91x_resources[1].start = PXA_GPIO_TO_IRQ(gpio_eth_irq);
-	smc91x_resources[1].end   = PXA_GPIO_TO_IRQ(gpio_eth_irq);
-	platform_device_register(&smc91x_device);
-
-	pxa_set_ac97_info(NULL);
-	zylonite_init_lcd();
-	zylonite_init_mmc();
-	zylonite_init_keypad();
-	zylonite_init_nand();
-	zylonite_init_leds();
-	zylonite_init_ohci();
-	zylonite_init_wm9713_audio();
-}
-
-MACHINE_START(ZYLONITE, "PXA3xx Platform Development Kit (aka Zylonite)")
-	.atag_offset	= 0x100,
-	.map_io		= pxa3xx_map_io,
-	.nr_irqs	= ZYLONITE_NR_IRQS,
-	.init_irq	= pxa3xx_init_irq,
-	.handle_irq	= pxa3xx_handle_irq,
-	.timer		= &pxa_timer,
-	.init_machine	= zylonite_init,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/zylonite_pxa300.c b/ANDROID_3.4.5/arch/arm/mach-pxa/zylonite_pxa300.c
deleted file mode 100644
index 86e59c04..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/zylonite_pxa300.c
+++ /dev/null
@@ -1,280 +0,0 @@
-/*
- * linux/arch/arm/mach-pxa/zylonite_pxa300.c
- *
- * PXA300/PXA310 specific support code for the
- * PXA3xx Development Platform (aka Zylonite)
- *
- * Copyright (C) 2007 Marvell Internation Ltd.
- * 2007-08-21: eric miao <eric.miao@marvell.com>
- *             initial version
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/i2c.h>
-#include <linux/i2c/pxa-i2c.h>
-#include <linux/i2c/pca953x.h>
-#include <linux/gpio.h>
-
-#include <mach/pxa300.h>
-#include <mach/zylonite.h>
-
-#include "generic.h"
-
-/* PXA300/PXA310 common configurations */
-static mfp_cfg_t common_mfp_cfg[] __initdata = {
-	/* LCD */
-	GPIO54_LCD_LDD_0,
-	GPIO55_LCD_LDD_1,
-	GPIO56_LCD_LDD_2,
-	GPIO57_LCD_LDD_3,
-	GPIO58_LCD_LDD_4,
-	GPIO59_LCD_LDD_5,
-	GPIO60_LCD_LDD_6,
-	GPIO61_LCD_LDD_7,
-	GPIO62_LCD_LDD_8,
-	GPIO63_LCD_LDD_9,
-	GPIO64_LCD_LDD_10,
-	GPIO65_LCD_LDD_11,
-	GPIO66_LCD_LDD_12,
-	GPIO67_LCD_LDD_13,
-	GPIO68_LCD_LDD_14,
-	GPIO69_LCD_LDD_15,
-	GPIO70_LCD_LDD_16,
-	GPIO71_LCD_LDD_17,
-	GPIO72_LCD_FCLK,
-	GPIO73_LCD_LCLK,
-	GPIO74_LCD_PCLK,
-	GPIO75_LCD_BIAS,
-	GPIO76_LCD_VSYNC,
-	GPIO127_LCD_CS_N,
-	GPIO20_PWM3_OUT,	/* backlight */
-
-	/* BTUART */
-	GPIO111_UART2_RTS,
-	GPIO112_UART2_RXD | MFP_LPM_EDGE_FALL,
-	GPIO113_UART2_TXD,
-	GPIO114_UART2_CTS | MFP_LPM_EDGE_BOTH,
-
-	/* STUART */
-	GPIO109_UART3_TXD,
-	GPIO110_UART3_RXD | MFP_LPM_EDGE_FALL,
-
-	/* AC97 */
-	GPIO23_AC97_nACRESET,
-	GPIO24_AC97_SYSCLK,
-	GPIO29_AC97_BITCLK,
-	GPIO25_AC97_SDATA_IN_0,
-	GPIO27_AC97_SDATA_OUT,
-	GPIO28_AC97_SYNC,
-	GPIO17_GPIO,	/* SDATA_IN_1 but unused - configure to GPIO */
-
-	/* SSP3 */
-	GPIO91_SSP3_SCLK,
-	GPIO92_SSP3_FRM,
-	GPIO93_SSP3_TXD,
-	GPIO94_SSP3_RXD,
-
-	/* WM9713 IRQ */
-	GPIO26_GPIO,
-
-	/* Keypad */
-	GPIO107_KP_DKIN_0 | MFP_LPM_EDGE_BOTH,
-	GPIO108_KP_DKIN_1 | MFP_LPM_EDGE_BOTH,
-	GPIO115_KP_MKIN_0 | MFP_LPM_EDGE_BOTH,
-	GPIO116_KP_MKIN_1 | MFP_LPM_EDGE_BOTH,
-	GPIO117_KP_MKIN_2 | MFP_LPM_EDGE_BOTH,
-	GPIO118_KP_MKIN_3 | MFP_LPM_EDGE_BOTH,
-	GPIO119_KP_MKIN_4 | MFP_LPM_EDGE_BOTH,
-	GPIO120_KP_MKIN_5 | MFP_LPM_EDGE_BOTH,
-	GPIO2_2_KP_MKIN_6 | MFP_LPM_EDGE_BOTH,
-	GPIO3_2_KP_MKIN_7 | MFP_LPM_EDGE_BOTH,
-	GPIO121_KP_MKOUT_0,
-	GPIO122_KP_MKOUT_1,
-	GPIO123_KP_MKOUT_2,
-	GPIO124_KP_MKOUT_3,
-	GPIO125_KP_MKOUT_4,
-	GPIO4_2_KP_MKOUT_5,
-	GPIO5_2_KP_MKOUT_6,
-	GPIO6_2_KP_MKOUT_7,
-
-	/* MMC1 */
-	GPIO3_MMC1_DAT0,
-	GPIO4_MMC1_DAT1 | MFP_LPM_EDGE_BOTH,
-	GPIO5_MMC1_DAT2,
-	GPIO6_MMC1_DAT3,
-	GPIO7_MMC1_CLK,
-	GPIO8_MMC1_CMD,	/* CMD0 for slot 0 */
-	GPIO15_GPIO,	/* CMD1 default as GPIO for slot 0 */
-
-	/* MMC2 */
-	GPIO9_MMC2_DAT0,
-	GPIO10_MMC2_DAT1 | MFP_LPM_EDGE_BOTH,
-	GPIO11_MMC2_DAT2,
-	GPIO12_MMC2_DAT3,
-	GPIO13_MMC2_CLK,
-	GPIO14_MMC2_CMD,
-
-	/* USB Host */
-	GPIO0_2_USBH_PEN,
-	GPIO1_2_USBH_PWR,
-
-	/* Standard I2C */
-	GPIO21_I2C_SCL,
-	GPIO22_I2C_SDA,
-
-	/* GPIO */
-	GPIO18_GPIO | MFP_PULL_HIGH,	/* GPIO Expander #0 INT_N */
-	GPIO19_GPIO | MFP_PULL_HIGH,	/* GPIO Expander #1 INT_N */
-};
-
-static mfp_cfg_t pxa300_mfp_cfg[] __initdata = {
-	/* FFUART */
-	GPIO30_UART1_RXD | MFP_LPM_EDGE_FALL,
-	GPIO31_UART1_TXD,
-	GPIO32_UART1_CTS,
-	GPIO37_UART1_RTS,
-	GPIO33_UART1_DCD,
-	GPIO34_UART1_DSR | MFP_LPM_EDGE_FALL,
-	GPIO35_UART1_RI,
-	GPIO36_UART1_DTR,
-
-	/* Ethernet */
-	GPIO2_nCS3,
-	GPIO99_GPIO,
-};
-
-static mfp_cfg_t pxa310_mfp_cfg[] __initdata = {
-	/* FFUART */
-	GPIO99_UART1_RXD | MFP_LPM_EDGE_FALL,
-	GPIO100_UART1_TXD,
-	GPIO101_UART1_CTS,
-	GPIO106_UART1_RTS,
-
-	/* Ethernet */
-	GPIO2_nCS3,
-	GPIO102_GPIO,
-
-	/* MMC3 */
-	GPIO7_2_MMC3_DAT0,
-	GPIO8_2_MMC3_DAT1 | MFP_LPM_EDGE_BOTH,
-	GPIO9_2_MMC3_DAT2,
-	GPIO10_2_MMC3_DAT3,
-	GPIO103_MMC3_CLK,
-	GPIO105_MMC3_CMD,
-};
-
-#define NUM_LCD_DETECT_PINS	7
-
-static int lcd_detect_pins[] __initdata = {
-	MFP_PIN_GPIO71,	/* LCD_LDD_17 - ORIENT */
-	MFP_PIN_GPIO70, /* LCD_LDD_16 - LCDID[5] */
-	MFP_PIN_GPIO75, /* LCD_BIAS   - LCDID[4] */
-	MFP_PIN_GPIO73, /* LCD_LCLK   - LCDID[3] */
-	MFP_PIN_GPIO72, /* LCD_FCLK   - LCDID[2] */
-	MFP_PIN_GPIO127,/* LCD_CS_N   - LCDID[1] */
-	MFP_PIN_GPIO76, /* LCD_VSYNC  - LCDID[0] */
-};
-
-static void __init zylonite_detect_lcd_panel(void)
-{
-	unsigned long mfpr_save[NUM_LCD_DETECT_PINS];
-	int i, gpio, id = 0;
-
-	/* save the original MFP settings of these pins and configure
-	 * them as GPIO Input, DS01X, Pull Neither, Edge Clear
-	 */
-	for (i = 0; i < NUM_LCD_DETECT_PINS; i++) {
-		mfpr_save[i] = pxa3xx_mfp_read(lcd_detect_pins[i]);
-		pxa3xx_mfp_write(lcd_detect_pins[i], 0x8440);
-	}
-
-	for (i = 0; i < NUM_LCD_DETECT_PINS; i++) {
-		id = id << 1;
-		gpio = mfp_to_gpio(lcd_detect_pins[i]);
-		gpio_request(gpio, "LCD_ID_PINS");
-		gpio_direction_input(gpio);
-
-		if (gpio_get_value(gpio))
-			id = id | 0x1;
-		gpio_free(gpio);
-	}
-
-	/* lcd id, flush out bit 1 */
-	lcd_id = id & 0x3d;
-
-	/* lcd orientation, portrait or landscape */
-	lcd_orientation = (id >> 6) & 0x1;
-
-	/* restore the original MFP settings */
-	for (i = 0; i < NUM_LCD_DETECT_PINS; i++)
-		pxa3xx_mfp_write(lcd_detect_pins[i], mfpr_save[i]);
-}
-
-#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
-static struct pca953x_platform_data gpio_exp[] = {
-	[0] = {
-		.gpio_base	= 128,
-	},
-	[1] = {
-		.gpio_base	= 144,
-	},
-};
-
-static struct i2c_board_info zylonite_i2c_board_info[] = {
-	{
-		.type		= "pca9539",
-		.addr		= 0x74,
-		.platform_data	= &gpio_exp[0],
-		.irq		= PXA_GPIO_TO_IRQ(18),
-	}, {
-		.type		= "pca9539",
-		.addr		= 0x75,
-		.platform_data	= &gpio_exp[1],
-		.irq		= PXA_GPIO_TO_IRQ(19),
-	},
-};
-
-static void __init zylonite_init_i2c(void)
-{
-	pxa_set_i2c_info(NULL);
-	i2c_register_board_info(0, ARRAY_AND_SIZE(zylonite_i2c_board_info));
-}
-#else
-static inline void zylonite_init_i2c(void) {}
-#endif
-
-void __init zylonite_pxa300_init(void)
-{
-	if (cpu_is_pxa300() || cpu_is_pxa310()) {
-		/* initialize MFP */
-		pxa3xx_mfp_config(ARRAY_AND_SIZE(common_mfp_cfg));
-
-		/* detect LCD panel */
-		zylonite_detect_lcd_panel();
-
-		/* WM9713 IRQ */
-		wm9713_irq = mfp_to_gpio(MFP_PIN_GPIO26);
-
-		zylonite_init_i2c();
-	}
-
-	if (cpu_is_pxa300()) {
-		pxa3xx_mfp_config(ARRAY_AND_SIZE(pxa300_mfp_cfg));
-		gpio_eth_irq = mfp_to_gpio(MFP_PIN_GPIO99);
-	}
-
-	if (cpu_is_pxa310()) {
-		pxa3xx_mfp_config(ARRAY_AND_SIZE(pxa310_mfp_cfg));
-		gpio_eth_irq = mfp_to_gpio(MFP_PIN_GPIO102);
-	}
-
-	/* GPIOs for Debug LEDs */
-	gpio_debug_led1 = EXT_GPIO(25);
-	gpio_debug_led2 = EXT_GPIO(26);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/zylonite_pxa320.c b/ANDROID_3.4.5/arch/arm/mach-pxa/zylonite_pxa320.c
deleted file mode 100644
index 9942bac4..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/zylonite_pxa320.c
+++ /dev/null
@@ -1,215 +0,0 @@
-/*
- * linux/arch/arm/mach-pxa/zylonite_pxa320.c
- *
- * PXA320 specific support code for the
- * PXA3xx Development Platform (aka Zylonite)
- *
- * Copyright (C) 2007 Marvell Internation Ltd.
- * 2007-08-21: eric miao <eric.miao@marvell.com>
- *             initial version
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-
-#include <mach/pxa320.h>
-#include <mach/zylonite.h>
-
-#include "generic.h"
-
-static mfp_cfg_t mfp_cfg[] __initdata = {
-	/* LCD */
-	GPIO6_2_LCD_LDD_0,
-	GPIO7_2_LCD_LDD_1,
-	GPIO8_2_LCD_LDD_2,
-	GPIO9_2_LCD_LDD_3,
-	GPIO10_2_LCD_LDD_4,
-	GPIO11_2_LCD_LDD_5,
-	GPIO12_2_LCD_LDD_6,
-	GPIO13_2_LCD_LDD_7,
-	GPIO63_LCD_LDD_8,
-	GPIO64_LCD_LDD_9,
-	GPIO65_LCD_LDD_10,
-	GPIO66_LCD_LDD_11,
-	GPIO67_LCD_LDD_12,
-	GPIO68_LCD_LDD_13,
-	GPIO69_LCD_LDD_14,
-	GPIO70_LCD_LDD_15,
-	GPIO71_LCD_LDD_16,
-	GPIO72_LCD_LDD_17,
-	GPIO73_LCD_CS_N,
-	GPIO74_LCD_VSYNC,
-	GPIO14_2_LCD_FCLK,
-	GPIO15_2_LCD_LCLK,
-	GPIO16_2_LCD_PCLK,
-	GPIO17_2_LCD_BIAS,
-	GPIO14_PWM3_OUT,	/* backlight */
-
-	/* FFUART */
-	GPIO41_UART1_RXD | MFP_LPM_EDGE_FALL,
-	GPIO42_UART1_TXD,
-	GPIO43_UART1_CTS,
-	GPIO44_UART1_DCD,
-	GPIO45_UART1_DSR | MFP_LPM_EDGE_FALL,
-	GPIO46_UART1_RI,
-	GPIO47_UART1_DTR,
-	GPIO48_UART1_RTS,
-
-	/* AC97 */
-	GPIO34_AC97_SYSCLK,
-	GPIO35_AC97_SDATA_IN_0,
-	GPIO37_AC97_SDATA_OUT,
-	GPIO38_AC97_SYNC,
-	GPIO39_AC97_BITCLK,
-	GPIO40_AC97_nACRESET,
-	GPIO36_GPIO,	/* SDATA_IN_1 but unused - configure to GPIO */
-
-	/* SSP3 */
-	GPIO89_SSP3_SCLK,
-	GPIO90_SSP3_FRM,
-	GPIO91_SSP3_TXD,
-	GPIO92_SSP3_RXD,
-
-	/* WM9713 IRQ */
-	GPIO15_GPIO,
-
-	/* I2C */
-	GPIO32_I2C_SCL,
-	GPIO33_I2C_SDA,
-
-	/* Keypad */
-	GPIO105_KP_DKIN_0 | MFP_LPM_EDGE_BOTH,
-	GPIO106_KP_DKIN_1 | MFP_LPM_EDGE_BOTH,
-	GPIO113_KP_MKIN_0 | MFP_LPM_EDGE_BOTH,
-	GPIO114_KP_MKIN_1 | MFP_LPM_EDGE_BOTH,
-	GPIO115_KP_MKIN_2 | MFP_LPM_EDGE_BOTH,
-	GPIO116_KP_MKIN_3 | MFP_LPM_EDGE_BOTH,
-	GPIO117_KP_MKIN_4 | MFP_LPM_EDGE_BOTH,
-	GPIO118_KP_MKIN_5 | MFP_LPM_EDGE_BOTH,
-	GPIO119_KP_MKIN_6 | MFP_LPM_EDGE_BOTH,
-	GPIO120_KP_MKIN_7 | MFP_LPM_EDGE_BOTH,
-	GPIO121_KP_MKOUT_0,
-	GPIO122_KP_MKOUT_1,
-	GPIO123_KP_MKOUT_2,
-	GPIO124_KP_MKOUT_3,
-	GPIO125_KP_MKOUT_4,
-	GPIO126_KP_MKOUT_5,
-	GPIO127_KP_MKOUT_6,
-	GPIO5_2_KP_MKOUT_7,
-
-	/* Ethernet */
-	GPIO4_nCS3,
-	GPIO90_GPIO,
-
-	/* MMC1 */
-	GPIO18_MMC1_DAT0,
-	GPIO19_MMC1_DAT1 | MFP_LPM_EDGE_BOTH,
-	GPIO20_MMC1_DAT2,
-	GPIO21_MMC1_DAT3,
-	GPIO22_MMC1_CLK,
-	GPIO23_MMC1_CMD,/* CMD0 for slot 0 */
-	GPIO31_GPIO,	/* CMD1 default as GPIO for slot 0 */
-
-	/* MMC2 */
-	GPIO24_MMC2_DAT0,
-	GPIO25_MMC2_DAT1 | MFP_LPM_EDGE_BOTH,
-	GPIO26_MMC2_DAT2,
-	GPIO27_MMC2_DAT3,
-	GPIO28_MMC2_CLK,
-	GPIO29_MMC2_CMD,
-
-	/* USB Host */
-	GPIO2_2_USBH_PEN,
-	GPIO3_2_USBH_PWR,
-
-	/* Debug LEDs */
-	GPIO1_2_GPIO | MFP_LPM_DRIVE_HIGH,
-	GPIO4_2_GPIO | MFP_LPM_DRIVE_HIGH,
-};
-
-#define NUM_LCD_DETECT_PINS	7
-
-static int lcd_detect_pins[] __initdata = {
-	MFP_PIN_GPIO72,   /* LCD_LDD_17 - ORIENT */
-	MFP_PIN_GPIO71,   /* LCD_LDD_16 - LCDID[5] */
-	MFP_PIN_GPIO17_2, /* LCD_BIAS   - LCDID[4] */
-	MFP_PIN_GPIO15_2, /* LCD_LCLK   - LCDID[3] */
-	MFP_PIN_GPIO14_2, /* LCD_FCLK   - LCDID[2] */
-	MFP_PIN_GPIO73,   /* LCD_CS_N   - LCDID[1] */
-	MFP_PIN_GPIO74,   /* LCD_VSYNC  - LCDID[0] */
-	/*
-	 * set the MFP_PIN_GPIO 14/15/17 to alternate function other than
-	 * GPIO to avoid input level confliction with 14_2, 15_2, 17_2
-	 */
-	MFP_PIN_GPIO14,
-	MFP_PIN_GPIO15,
-	MFP_PIN_GPIO17,
-};
-
-static int lcd_detect_mfpr[] __initdata = {
-	/* AF0, DS 1X, Pull Neither, Edge Clear */
-	0x8440, 0x8440, 0x8440, 0x8440, 0x8440, 0x8440, 0x8440,
-	0xc442, /* Backlight, Pull-Up, AF2 */
-	0x8445, /* AF5 */
-	0x8445, /* AF5 */
-};
-
-static void __init zylonite_detect_lcd_panel(void)
-{
-	unsigned long mfpr_save[ARRAY_SIZE(lcd_detect_pins)];
-	int i, gpio, id = 0;
-
-	/* save the original MFP settings of these pins and configure them
-	 * as GPIO Input, DS01X, Pull Neither, Edge Clear
-	 */
-	for (i = 0; i < ARRAY_SIZE(lcd_detect_pins); i++) {
-		mfpr_save[i] = pxa3xx_mfp_read(lcd_detect_pins[i]);
-		pxa3xx_mfp_write(lcd_detect_pins[i], lcd_detect_mfpr[i]);
-	}
-
-	for (i = 0; i < NUM_LCD_DETECT_PINS; i++) {
-		id = id << 1;
-		gpio = mfp_to_gpio(lcd_detect_pins[i]);
-		gpio_request(gpio, "LCD_ID_PINS");
-		gpio_direction_input(gpio);
-
-		if (gpio_get_value(gpio))
-			id = id | 0x1;
-		gpio_free(gpio);
-	}
-
-	/* lcd id, flush out bit 1 */
-	lcd_id = id & 0x3d;
-
-	/* lcd orientation, portrait or landscape */
-	lcd_orientation = (id >> 6) & 0x1;
-
-	/* restore the original MFP settings */
-	for (i = 0; i < ARRAY_SIZE(lcd_detect_pins); i++)
-		pxa3xx_mfp_write(lcd_detect_pins[i], mfpr_save[i]);
-}
-
-void __init zylonite_pxa320_init(void)
-{
-	if (cpu_is_pxa320()) {
-		/* initialize MFP */
-		pxa3xx_mfp_config(ARRAY_AND_SIZE(mfp_cfg));
-
-		/* detect LCD panel */
-		zylonite_detect_lcd_panel();
-
-		/* GPIO pin assignment */
-		gpio_eth_irq	= mfp_to_gpio(MFP_PIN_GPIO9);
-		gpio_debug_led1	= mfp_to_gpio(MFP_PIN_GPIO1_2);
-		gpio_debug_led2	= mfp_to_gpio(MFP_PIN_GPIO4_2);
-
-		/* WM9713 IRQ */
-		wm9713_irq = mfp_to_gpio(MFP_PIN_GPIO15);
-	}
-}
-- 
cgit