diff options
Diffstat (limited to 'sound/soc/omap/Kconfig')
| -rw-r--r-- | sound/soc/omap/Kconfig | 152 |
1 files changed, 152 insertions, 0 deletions
diff --git a/sound/soc/omap/Kconfig b/sound/soc/omap/Kconfig new file mode 100644 index 00000000..deafbfaa --- /dev/null +++ b/sound/soc/omap/Kconfig @@ -0,0 +1,152 @@ +config SND_OMAP_SOC + tristate "SoC Audio for the Texas Instruments OMAP chips" + depends on ARCH_OMAP + +config SND_OMAP_SOC_DMIC + tristate + +config SND_OMAP_SOC_MCBSP + tristate + +config SND_OMAP_SOC_MCPDM + tristate + +config SND_OMAP_SOC_HDMI + tristate + +config SND_OMAP_SOC_N810 + tristate "SoC Audio support for Nokia N810" + depends on SND_OMAP_SOC && MACH_NOKIA_N810 && I2C + depends on OMAP_MUX + select SND_OMAP_SOC_MCBSP + select SND_SOC_TLV320AIC3X + help + Say Y if you want to add support for SoC audio on Nokia N810. + +config SND_OMAP_SOC_RX51 + tristate "SoC Audio support for Nokia RX-51" + depends on SND_OMAP_SOC && MACH_NOKIA_RX51 + select SND_OMAP_SOC_MCBSP + select SND_SOC_TLV320AIC3X + select SND_SOC_TPA6130A2 + help + Say Y if you want to add support for SoC audio on Nokia RX-51 + hardware. This is also known as Nokia N900 product. + +config SND_OMAP_SOC_AMS_DELTA + tristate "SoC Audio support for Amstrad E3 (Delta) videophone" + depends on SND_OMAP_SOC && MACH_AMS_DELTA + select SND_OMAP_SOC_MCBSP + select SND_SOC_CX20442 + help + Say Y if you want to add support for SoC audio device connected to + a handset and a speakerphone found on Amstrad E3 (Delta) videophone. + + Note that in order to get those devices fully supported, you have to + build the kernel with standard serial port driver included and + configured for at least 4 ports. Then, from userspace, you must load + a line discipline #19 on the modem (ttyS3) serial line. The simplest + way to achieve this is to install util-linux-ng and use the included + ldattach utility. This can be started automatically from udev, + a simple rule like this one should do the trick (it does for me): + ACTION=="add", KERNEL=="controlC0", \ + RUN+="/usr/sbin/ldattach 19 /dev/ttyS3" + +config SND_OMAP_SOC_OSK5912 + tristate "SoC Audio support for omap osk5912" + depends on SND_OMAP_SOC && MACH_OMAP_OSK && I2C + select SND_OMAP_SOC_MCBSP + select SND_SOC_TLV320AIC23 + help + Say Y if you want to add support for SoC audio on osk5912. + +config SND_OMAP_SOC_OVERO + tristate "SoC Audio support for Gumstix Overo and CompuLab CM-T35" + depends on TWL4030_CORE && SND_OMAP_SOC && (MACH_OVERO || MACH_CM_T35) + select SND_OMAP_SOC_MCBSP + select SND_SOC_TWL4030 + help + Say Y if you want to add support for SoC audio on the + Gumstix Overo or CompuLab CM-T35 + +config SND_OMAP_SOC_OMAP3EVM + tristate "SoC Audio support for OMAP3EVM board" + depends on TWL4030_CORE && SND_OMAP_SOC && MACH_OMAP3EVM + select SND_OMAP_SOC_MCBSP + select SND_SOC_TWL4030 + help + Say Y if you want to add support for SoC audio on the omap3evm board. + +config SND_OMAP_SOC_AM3517EVM + tristate "SoC Audio support for OMAP3517 / AM3517 EVM" + depends on SND_OMAP_SOC && MACH_OMAP3517EVM && I2C + select SND_OMAP_SOC_MCBSP + select SND_SOC_TLV320AIC23 + help + Say Y if you want to add support for SoC audio on the OMAP3517 / AM3517 + EVM. + +config SND_OMAP_SOC_SDP3430 + tristate "SoC Audio support for Texas Instruments SDP3430" + depends on TWL4030_CORE && SND_OMAP_SOC && MACH_OMAP_3430SDP + select SND_OMAP_SOC_MCBSP + select SND_SOC_TWL4030 + help + Say Y if you want to add support for SoC audio on Texas Instruments + SDP3430. + +config SND_OMAP_SOC_OMAP_ABE_TWL6040 + tristate "SoC Audio support for OMAP boards using ABE and twl6040 codec" + depends on TWL6040_CORE && SND_OMAP_SOC && ARCH_OMAP4 + select SND_OMAP_SOC_DMIC + select SND_OMAP_SOC_MCPDM + select SND_SOC_TWL6040 + select SND_SOC_DMIC + help + Say Y if you want to add support for SoC audio on OMAP boards using + ABE and twl6040 codec. This driver currently supports: + - SDP4430/Blaze boards + - PandaBoard (4430) + - PandaBoardES (4460) + +config SND_OMAP_SOC_OMAP4_HDMI + tristate "SoC Audio support for Texas Instruments OMAP4 HDMI" + depends on SND_OMAP_SOC && OMAP4_DSS_HDMI && OMAP2_DSS && ARCH_OMAP4 + select SND_OMAP_SOC_HDMI + help + Say Y if you want to add support for SoC HDMI audio on Texas Instruments + OMAP4 chips + +config SND_OMAP_SOC_OMAP3_PANDORA + tristate "SoC Audio support for OMAP3 Pandora" + depends on TWL4030_CORE && SND_OMAP_SOC && MACH_OMAP3_PANDORA + select SND_OMAP_SOC_MCBSP + select SND_SOC_TWL4030 + help + Say Y if you want to add support for SoC audio on the OMAP3 Pandora. + +config SND_OMAP_SOC_OMAP3_BEAGLE + tristate "SoC Audio support for OMAP3 Beagle and Devkit8000" + depends on TWL4030_CORE && SND_OMAP_SOC + depends on (MACH_OMAP3_BEAGLE || MACH_DEVKIT8000) + select SND_OMAP_SOC_MCBSP + select SND_SOC_TWL4030 + help + Say Y if you want to add support for SoC audio on the Beagleboard or + the clone Devkit8000. + +config SND_OMAP_SOC_ZOOM2 + tristate "SoC Audio support for Zoom2" + depends on TWL4030_CORE && SND_OMAP_SOC && MACH_OMAP_ZOOM2 + select SND_OMAP_SOC_MCBSP + select SND_SOC_TWL4030 + help + Say Y if you want to add support for Soc audio on Zoom2 board. + +config SND_OMAP_SOC_IGEP0020 + tristate "SoC Audio support for IGEP v2" + depends on TWL4030_CORE && SND_OMAP_SOC && MACH_IGEP0020 + select SND_OMAP_SOC_MCBSP + select SND_SOC_TWL4030 + help + Say Y if you want to add support for Soc audio on IGEP v2 board. |