diff options
Diffstat (limited to 'sound/soc/codecs/wm8960.c')
| -rw-r--r-- | sound/soc/codecs/wm8960.c | 1032 |
1 files changed, 1032 insertions, 0 deletions
diff --git a/sound/soc/codecs/wm8960.c b/sound/soc/codecs/wm8960.c new file mode 100644 index 00000000..840d7208 --- /dev/null +++ b/sound/soc/codecs/wm8960.c @@ -0,0 +1,1032 @@ +/* + * wm8960.c -- WM8960 ALSA SoC Audio driver + * + * Author: Liam Girdwood + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/pm.h> +#include <linux/i2c.h> +#include <linux/slab.h> +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <sound/initval.h> +#include <sound/tlv.h> +#include <sound/wm8960.h> + +#include "wm8960.h" + +/* R25 - Power 1 */ +#define WM8960_VMID_MASK 0x180 +#define WM8960_VREF 0x40 + +/* R26 - Power 2 */ +#define WM8960_PWR2_LOUT1 0x40 +#define WM8960_PWR2_ROUT1 0x20 +#define WM8960_PWR2_OUT3 0x02 + +/* R28 - Anti-pop 1 */ +#define WM8960_POBCTRL 0x80 +#define WM8960_BUFDCOPEN 0x10 +#define WM8960_BUFIOEN 0x08 +#define WM8960_SOFT_ST 0x04 +#define WM8960_HPSTBY 0x01 + +/* R29 - Anti-pop 2 */ +#define WM8960_DISOP 0x40 +#define WM8960_DRES_MASK 0x30 + +/* + * wm8960 register cache + * We can't read the WM8960 register space when we are + * using 2 wire for device control, so we cache them instead. + */ +static const u16 wm8960_reg[WM8960_CACHEREGNUM] = { + 0x0097, 0x0097, 0x0000, 0x0000, + 0x0000, 0x0008, 0x0000, 0x000a, + 0x01c0, 0x0000, 0x00ff, 0x00ff, + 0x0000, 0x0000, 0x0000, 0x0000, + 0x0000, 0x007b, 0x0100, 0x0032, + 0x0000, 0x00c3, 0x00c3, 0x01c0, + 0x0000, 0x0000, 0x0000, 0x0000, + 0x0000, 0x0000, 0x0000, 0x0000, + 0x0100, 0x0100, 0x0050, 0x0050, + 0x0050, 0x0050, 0x0000, 0x0000, + 0x0000, 0x0000, 0x0040, 0x0000, + 0x0000, 0x0050, 0x0050, 0x0000, + 0x0002, 0x0037, 0x004d, 0x0080, + 0x0008, 0x0031, 0x0026, 0x00e9, +}; + +struct wm8960_priv { + enum snd_soc_control_type control_type; + int (*set_bias_level)(struct snd_soc_codec *, + enum snd_soc_bias_level level); + struct snd_soc_dapm_widget *lout1; + struct snd_soc_dapm_widget *rout1; + struct snd_soc_dapm_widget *out3; + bool deemph; + int playback_fs; +}; + +#define wm8960_reset(c) snd_soc_write(c, WM8960_RESET, 0) + +/* enumerated controls */ +static const char *wm8960_polarity[] = {"No Inversion", "Left Inverted", + "Right Inverted", "Stereo Inversion"}; +static const char *wm8960_3d_upper_cutoff[] = {"High", "Low"}; +static const char *wm8960_3d_lower_cutoff[] = {"Low", "High"}; +static const char *wm8960_alcfunc[] = {"Off", "Right", "Left", "Stereo"}; +static const char *wm8960_alcmode[] = {"ALC", "Limiter"}; + +static const struct soc_enum wm8960_enum[] = { + SOC_ENUM_SINGLE(WM8960_DACCTL1, 5, 4, wm8960_polarity), + SOC_ENUM_SINGLE(WM8960_DACCTL2, 5, 4, wm8960_polarity), + SOC_ENUM_SINGLE(WM8960_3D, 6, 2, wm8960_3d_upper_cutoff), + SOC_ENUM_SINGLE(WM8960_3D, 5, 2, wm8960_3d_lower_cutoff), + SOC_ENUM_SINGLE(WM8960_ALC1, 7, 4, wm8960_alcfunc), + SOC_ENUM_SINGLE(WM8960_ALC3, 8, 2, wm8960_alcmode), +}; + +static const int deemph_settings[] = { 0, 32000, 44100, 48000 }; + +static int wm8960_set_deemph(struct snd_soc_codec *codec) +{ + struct wm8960_priv *wm8960 = snd_soc_codec_get_drvdata(codec); + int val, i, best; + + /* If we're using deemphasis select the nearest available sample + * rate. + */ + if (wm8960->deemph) { + best = 1; + for (i = 2; i < ARRAY_SIZE(deemph_settings); i++) { + if (abs(deemph_settings[i] - wm8960->playback_fs) < + abs(deemph_settings[best] - wm8960->playback_fs)) + best = i; + } + + val = best << 1; + } else { + val = 0; + } + + dev_dbg(codec->dev, "Set deemphasis %d\n", val); + + return snd_soc_update_bits(codec, WM8960_DACCTL1, + 0x6, val); +} + +static int wm8960_get_deemph(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol); + struct wm8960_priv *wm8960 = snd_soc_codec_get_drvdata(codec); + + ucontrol->value.enumerated.item[0] = wm8960->deemph; + return 0; +} + +static int wm8960_put_deemph(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol); + struct wm8960_priv *wm8960 = snd_soc_codec_get_drvdata(codec); + int deemph = ucontrol->value.enumerated.item[0]; + + if (deemph > 1) + return -EINVAL; + + wm8960->deemph = deemph; + + return wm8960_set_deemph(codec); +} + +static const DECLARE_TLV_DB_SCALE(adc_tlv, -9700, 50, 0); +static const DECLARE_TLV_DB_SCALE(dac_tlv, -12700, 50, 1); +static const DECLARE_TLV_DB_SCALE(bypass_tlv, -2100, 300, 0); +static const DECLARE_TLV_DB_SCALE(out_tlv, -12100, 100, 1); + +static const struct snd_kcontrol_new wm8960_snd_controls[] = { +SOC_DOUBLE_R_TLV("Capture Volume", WM8960_LINVOL, WM8960_RINVOL, + 0, 63, 0, adc_tlv), +SOC_DOUBLE_R("Capture Volume ZC Switch", WM8960_LINVOL, WM8960_RINVOL, + 6, 1, 0), +SOC_DOUBLE_R("Capture Switch", WM8960_LINVOL, WM8960_RINVOL, + 7, 1, 0), + +SOC_DOUBLE_R_TLV("Playback Volume", WM8960_LDAC, WM8960_RDAC, + 0, 255, 0, dac_tlv), + +SOC_DOUBLE_R_TLV("Headphone Playback Volume", WM8960_LOUT1, WM8960_ROUT1, + 0, 127, 0, out_tlv), +SOC_DOUBLE_R("Headphone Playback ZC Switch", WM8960_LOUT1, WM8960_ROUT1, + 7, 1, 0), + +SOC_DOUBLE_R_TLV("Speaker Playback Volume", WM8960_LOUT2, WM8960_ROUT2, + 0, 127, 0, out_tlv), +SOC_DOUBLE_R("Speaker Playback ZC Switch", WM8960_LOUT2, WM8960_ROUT2, + 7, 1, 0), +SOC_SINGLE("Speaker DC Volume", WM8960_CLASSD3, 3, 5, 0), +SOC_SINGLE("Speaker AC Volume", WM8960_CLASSD3, 0, 5, 0), + +SOC_SINGLE("PCM Playback -6dB Switch", WM8960_DACCTL1, 7, 1, 0), +SOC_ENUM("ADC Polarity", wm8960_enum[0]), +SOC_SINGLE("ADC High Pass Filter Switch", WM8960_DACCTL1, 0, 1, 0), + +SOC_ENUM("DAC Polarity", wm8960_enum[2]), +SOC_SINGLE_BOOL_EXT("DAC Deemphasis Switch", 0, + wm8960_get_deemph, wm8960_put_deemph), + +SOC_ENUM("3D Filter Upper Cut-Off", wm8960_enum[2]), +SOC_ENUM("3D Filter Lower Cut-Off", wm8960_enum[3]), +SOC_SINGLE("3D Volume", WM8960_3D, 1, 15, 0), +SOC_SINGLE("3D Switch", WM8960_3D, 0, 1, 0), + +SOC_ENUM("ALC Function", wm8960_enum[4]), +SOC_SINGLE("ALC Max Gain", WM8960_ALC1, 4, 7, 0), +SOC_SINGLE("ALC Target", WM8960_ALC1, 0, 15, 1), +SOC_SINGLE("ALC Min Gain", WM8960_ALC2, 4, 7, 0), +SOC_SINGLE("ALC Hold Time", WM8960_ALC2, 0, 15, 0), +SOC_ENUM("ALC Mode", wm8960_enum[5]), +SOC_SINGLE("ALC Decay", WM8960_ALC3, 4, 15, 0), +SOC_SINGLE("ALC Attack", WM8960_ALC3, 0, 15, 0), + +SOC_SINGLE("Noise Gate Threshold", WM8960_NOISEG, 3, 31, 0), +SOC_SINGLE("Noise Gate Switch", WM8960_NOISEG, 0, 1, 0), + +SOC_DOUBLE_R("ADC PCM Capture Volume", WM8960_LINPATH, WM8960_RINPATH, + 0, 127, 0), + +SOC_SINGLE_TLV("Left Output Mixer Boost Bypass Volume", + WM8960_BYPASS1, 4, 7, 1, bypass_tlv), +SOC_SINGLE_TLV("Left Output Mixer LINPUT3 Volume", + WM8960_LOUTMIX, 4, 7, 1, bypass_tlv), +SOC_SINGLE_TLV("Right Output Mixer Boost Bypass Volume", + WM8960_BYPASS2, 4, 7, 1, bypass_tlv), +SOC_SINGLE_TLV("Right Output Mixer RINPUT3 Volume", + WM8960_ROUTMIX, 4, 7, 1, bypass_tlv), +}; + +static const struct snd_kcontrol_new wm8960_lin_boost[] = { +SOC_DAPM_SINGLE("LINPUT2 Switch", WM8960_LINPATH, 6, 1, 0), +SOC_DAPM_SINGLE("LINPUT3 Switch", WM8960_LINPATH, 7, 1, 0), +SOC_DAPM_SINGLE("LINPUT1 Switch", WM8960_LINPATH, 8, 1, 0), +}; + +static const struct snd_kcontrol_new wm8960_lin[] = { +SOC_DAPM_SINGLE("Boost Switch", WM8960_LINPATH, 3, 1, 0), +}; + +static const struct snd_kcontrol_new wm8960_rin_boost[] = { +SOC_DAPM_SINGLE("RINPUT2 Switch", WM8960_RINPATH, 6, 1, 0), +SOC_DAPM_SINGLE("RINPUT3 Switch", WM8960_RINPATH, 7, 1, 0), +SOC_DAPM_SINGLE("RINPUT1 Switch", WM8960_RINPATH, 8, 1, 0), +}; + +static const struct snd_kcontrol_new wm8960_rin[] = { +SOC_DAPM_SINGLE("Boost Switch", WM8960_RINPATH, 3, 1, 0), +}; + +static const struct snd_kcontrol_new wm8960_loutput_mixer[] = { +SOC_DAPM_SINGLE("PCM Playback Switch", WM8960_LOUTMIX, 8, 1, 0), +SOC_DAPM_SINGLE("LINPUT3 Switch", WM8960_LOUTMIX, 7, 1, 0), +SOC_DAPM_SINGLE("Boost Bypass Switch", WM8960_BYPASS1, 7, 1, 0), +}; + +static const struct snd_kcontrol_new wm8960_routput_mixer[] = { +SOC_DAPM_SINGLE("PCM Playback Switch", WM8960_ROUTMIX, 8, 1, 0), +SOC_DAPM_SINGLE("RINPUT3 Switch", WM8960_ROUTMIX, 7, 1, 0), +SOC_DAPM_SINGLE("Boost Bypass Switch", WM8960_BYPASS2, 7, 1, 0), +}; + +static const struct snd_kcontrol_new wm8960_mono_out[] = { +SOC_DAPM_SINGLE("Left Switch", WM8960_MONOMIX1, 7, 1, 0), +SOC_DAPM_SINGLE("Right Switch", WM8960_MONOMIX2, 7, 1, 0), +}; + +static const struct snd_soc_dapm_widget wm8960_dapm_widgets[] = { +SND_SOC_DAPM_INPUT("LINPUT1"), +SND_SOC_DAPM_INPUT("RINPUT1"), +SND_SOC_DAPM_INPUT("LINPUT2"), +SND_SOC_DAPM_INPUT("RINPUT2"), +SND_SOC_DAPM_INPUT("LINPUT3"), +SND_SOC_DAPM_INPUT("RINPUT3"), + +SND_SOC_DAPM_SUPPLY("MICB", WM8960_POWER1, 1, 0, NULL, 0), + +SND_SOC_DAPM_MIXER("Left Boost Mixer", WM8960_POWER1, 5, 0, + wm8960_lin_boost, ARRAY_SIZE(wm8960_lin_boost)), +SND_SOC_DAPM_MIXER("Right Boost Mixer", WM8960_POWER1, 4, 0, + wm8960_rin_boost, ARRAY_SIZE(wm8960_rin_boost)), + +SND_SOC_DAPM_MIXER("Left Input Mixer", WM8960_POWER3, 5, 0, + wm8960_lin, ARRAY_SIZE(wm8960_lin)), +SND_SOC_DAPM_MIXER("Right Input Mixer", WM8960_POWER3, 4, 0, + wm8960_rin, ARRAY_SIZE(wm8960_rin)), + +SND_SOC_DAPM_ADC("Left ADC", "Capture", WM8960_POWER2, 3, 0), +SND_SOC_DAPM_ADC("Right ADC", "Capture", WM8960_POWER2, 2, 0), + +SND_SOC_DAPM_DAC("Left DAC", "Playback", WM8960_POWER2, 8, 0), +SND_SOC_DAPM_DAC("Right DAC", "Playback", WM8960_POWER2, 7, 0), + +SND_SOC_DAPM_MIXER("Left Output Mixer", WM8960_POWER3, 3, 0, + &wm8960_loutput_mixer[0], + ARRAY_SIZE(wm8960_loutput_mixer)), +SND_SOC_DAPM_MIXER("Right Output Mixer", WM8960_POWER3, 2, 0, + &wm8960_routput_mixer[0], + ARRAY_SIZE(wm8960_routput_mixer)), + +SND_SOC_DAPM_PGA("LOUT1 PGA", WM8960_POWER2, 6, 0, NULL, 0), +SND_SOC_DAPM_PGA("ROUT1 PGA", WM8960_POWER2, 5, 0, NULL, 0), + +SND_SOC_DAPM_PGA("Left Speaker PGA", WM8960_POWER2, 4, 0, NULL, 0), +SND_SOC_DAPM_PGA("Right Speaker PGA", WM8960_POWER2, 3, 0, NULL, 0), + +SND_SOC_DAPM_PGA("Right Speaker Output", WM8960_CLASSD1, 7, 0, NULL, 0), +SND_SOC_DAPM_PGA("Left Speaker Output", WM8960_CLASSD1, 6, 0, NULL, 0), + +SND_SOC_DAPM_OUTPUT("SPK_LP"), +SND_SOC_DAPM_OUTPUT("SPK_LN"), +SND_SOC_DAPM_OUTPUT("HP_L"), +SND_SOC_DAPM_OUTPUT("HP_R"), +SND_SOC_DAPM_OUTPUT("SPK_RP"), +SND_SOC_DAPM_OUTPUT("SPK_RN"), +SND_SOC_DAPM_OUTPUT("OUT3"), +}; + +static const struct snd_soc_dapm_widget wm8960_dapm_widgets_out3[] = { +SND_SOC_DAPM_MIXER("Mono Output Mixer", WM8960_POWER2, 1, 0, + &wm8960_mono_out[0], + ARRAY_SIZE(wm8960_mono_out)), +}; + +/* Represent OUT3 as a PGA so that it gets turned on with LOUT1/ROUT1 */ +static const struct snd_soc_dapm_widget wm8960_dapm_widgets_capless[] = { +SND_SOC_DAPM_PGA("OUT3 VMID", WM8960_POWER2, 1, 0, NULL, 0), +}; + +static const struct snd_soc_dapm_route audio_paths[] = { + { "Left Boost Mixer", "LINPUT1 Switch", "LINPUT1" }, + { "Left Boost Mixer", "LINPUT2 Switch", "LINPUT2" }, + { "Left Boost Mixer", "LINPUT3 Switch", "LINPUT3" }, + + { "Left Input Mixer", "Boost Switch", "Left Boost Mixer", }, + { "Left Input Mixer", NULL, "LINPUT1", }, /* Really Boost Switch */ + { "Left Input Mixer", NULL, "LINPUT2" }, + { "Left Input Mixer", NULL, "LINPUT3" }, + + { "Right Boost Mixer", "RINPUT1 Switch", "RINPUT1" }, + { "Right Boost Mixer", "RINPUT2 Switch", "RINPUT2" }, + { "Right Boost Mixer", "RINPUT3 Switch", "RINPUT3" }, + + { "Right Input Mixer", "Boost Switch", "Right Boost Mixer", }, + { "Right Input Mixer", NULL, "RINPUT1", }, /* Really Boost Switch */ + { "Right Input Mixer", NULL, "RINPUT2" }, + { "Right Input Mixer", NULL, "LINPUT3" }, + + { "Left ADC", NULL, "Left Input Mixer" }, + { "Right ADC", NULL, "Right Input Mixer" }, + + { "Left Output Mixer", "LINPUT3 Switch", "LINPUT3" }, + { "Left Output Mixer", "Boost Bypass Switch", "Left Boost Mixer"} , + { "Left Output Mixer", "PCM Playback Switch", "Left DAC" }, + + { "Right Output Mixer", "RINPUT3 Switch", "RINPUT3" }, + { "Right Output Mixer", "Boost Bypass Switch", "Right Boost Mixer" } , + { "Right Output Mixer", "PCM Playback Switch", "Right DAC" }, + + { "LOUT1 PGA", NULL, "Left Output Mixer" }, + { "ROUT1 PGA", NULL, "Right Output Mixer" }, + + { "HP_L", NULL, "LOUT1 PGA" }, + { "HP_R", NULL, "ROUT1 PGA" }, + + { "Left Speaker PGA", NULL, "Left Output Mixer" }, + { "Right Speaker PGA", NULL, "Right Output Mixer" }, + + { "Left Speaker Output", NULL, "Left Speaker PGA" }, + { "Right Speaker Output", NULL, "Right Speaker PGA" }, + + { "SPK_LN", NULL, "Left Speaker Output" }, + { "SPK_LP", NULL, "Left Speaker Output" }, + { "SPK_RN", NULL, "Right Speaker Output" }, + { "SPK_RP", NULL, "Right Speaker Output" }, +}; + +static const struct snd_soc_dapm_route audio_paths_out3[] = { + { "Mono Output Mixer", "Left Switch", "Left Output Mixer" }, + { "Mono Output Mixer", "Right Switch", "Right Output Mixer" }, + + { "OUT3", NULL, "Mono Output Mixer", } +}; + +static const struct snd_soc_dapm_route audio_paths_capless[] = { + { "HP_L", NULL, "OUT3 VMID" }, + { "HP_R", NULL, "OUT3 VMID" }, + + { "OUT3 VMID", NULL, "Left Output Mixer" }, + { "OUT3 VMID", NULL, "Right Output Mixer" }, +}; + +static int wm8960_add_widgets(struct snd_soc_codec *codec) +{ + struct wm8960_data *pdata = codec->dev->platform_data; + struct wm8960_priv *wm8960 = snd_soc_codec_get_drvdata(codec); + struct snd_soc_dapm_context *dapm = &codec->dapm; + struct snd_soc_dapm_widget *w; + + snd_soc_dapm_new_controls(dapm, wm8960_dapm_widgets, + ARRAY_SIZE(wm8960_dapm_widgets)); + + snd_soc_dapm_add_routes(dapm, audio_paths, ARRAY_SIZE(audio_paths)); + + /* In capless mode OUT3 is used to provide VMID for the + * headphone outputs, otherwise it is used as a mono mixer. + */ + if (pdata && pdata->capless) { + snd_soc_dapm_new_controls(dapm, wm8960_dapm_widgets_capless, + ARRAY_SIZE(wm8960_dapm_widgets_capless)); + + snd_soc_dapm_add_routes(dapm, audio_paths_capless, + ARRAY_SIZE(audio_paths_capless)); + } else { + snd_soc_dapm_new_controls(dapm, wm8960_dapm_widgets_out3, + ARRAY_SIZE(wm8960_dapm_widgets_out3)); + + snd_soc_dapm_add_routes(dapm, audio_paths_out3, + ARRAY_SIZE(audio_paths_out3)); + } + + /* We need to power up the headphone output stage out of + * sequence for capless mode. To save scanning the widget + * list each time to find the desired power state do so now + * and save the result. + */ + list_for_each_entry(w, &codec->card->widgets, list) { + if (w->dapm != &codec->dapm) + continue; + if (strcmp(w->name, "LOUT1 PGA") == 0) + wm8960->lout1 = w; + if (strcmp(w->name, "ROUT1 PGA") == 0) + wm8960->rout1 = w; + if (strcmp(w->name, "OUT3 VMID") == 0) + wm8960->out3 = w; + } + + return 0; +} + +static int wm8960_set_dai_fmt(struct snd_soc_dai *codec_dai, + unsigned int fmt) +{ + struct snd_soc_codec *codec = codec_dai->codec; + u16 iface = 0; + + /* set master/slave audio interface */ + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { + case SND_SOC_DAIFMT_CBM_CFM: + iface |= 0x0040; + break; + case SND_SOC_DAIFMT_CBS_CFS: + break; + default: + return -EINVAL; + } + + /* interface format */ + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_I2S: + iface |= 0x0002; + break; + case SND_SOC_DAIFMT_RIGHT_J: + break; + case SND_SOC_DAIFMT_LEFT_J: + iface |= 0x0001; + break; + case SND_SOC_DAIFMT_DSP_A: + iface |= 0x0003; + break; + case SND_SOC_DAIFMT_DSP_B: + iface |= 0x0013; + break; + default: + return -EINVAL; + } + + /* clock inversion */ + switch (fmt & SND_SOC_DAIFMT_INV_MASK) { + case SND_SOC_DAIFMT_NB_NF: + break; + case SND_SOC_DAIFMT_IB_IF: + iface |= 0x0090; + break; + case SND_SOC_DAIFMT_IB_NF: + iface |= 0x0080; + break; + case SND_SOC_DAIFMT_NB_IF: + iface |= 0x0010; + break; + default: + return -EINVAL; + } + + /* set iface */ + snd_soc_write(codec, WM8960_IFACE1, iface); + return 0; +} + +static struct { + int rate; + unsigned int val; +} alc_rates[] = { + { 48000, 0 }, + { 44100, 0 }, + { 32000, 1 }, + { 22050, 2 }, + { 24000, 2 }, + { 16000, 3 }, + { 11250, 4 }, + { 12000, 4 }, + { 8000, 5 }, +}; + +static int wm8960_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *dai) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_codec *codec = rtd->codec; + struct wm8960_priv *wm8960 = snd_soc_codec_get_drvdata(codec); + u16 iface = snd_soc_read(codec, WM8960_IFACE1) & 0xfff3; + int i; + + /* bit size */ + switch (params_format(params)) { + case SNDRV_PCM_FORMAT_S16_LE: + break; + case SNDRV_PCM_FORMAT_S20_3LE: + iface |= 0x0004; + break; + case SNDRV_PCM_FORMAT_S24_LE: + iface |= 0x0008; + break; + } + + /* Update filters for the new rate */ + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { + wm8960->playback_fs = params_rate(params); + wm8960_set_deemph(codec); + } else { + for (i = 0; i < ARRAY_SIZE(alc_rates); i++) + if (alc_rates[i].rate == params_rate(params)) + snd_soc_update_bits(codec, + WM8960_ADDCTL3, 0x7, + alc_rates[i].val); + } + + /* set iface */ + snd_soc_write(codec, WM8960_IFACE1, iface); + return 0; +} + +static int wm8960_mute(struct snd_soc_dai *dai, int mute) +{ + struct snd_soc_codec *codec = dai->codec; + + if (mute) + snd_soc_update_bits(codec, WM8960_DACCTL1, 0x8, 0x8); + else + snd_soc_update_bits(codec, WM8960_DACCTL1, 0x8, 0); + return 0; +} + +static int wm8960_set_bias_level_out3(struct snd_soc_codec *codec, + enum snd_soc_bias_level level) +{ + switch (level) { + case SND_SOC_BIAS_ON: + break; + + case SND_SOC_BIAS_PREPARE: + /* Set VMID to 2x50k */ + snd_soc_update_bits(codec, WM8960_POWER1, 0x180, 0x80); + break; + + case SND_SOC_BIAS_STANDBY: + if (codec->dapm.bias_level == SND_SOC_BIAS_OFF) { + snd_soc_cache_sync(codec); + + /* Enable anti-pop features */ + snd_soc_write(codec, WM8960_APOP1, + WM8960_POBCTRL | WM8960_SOFT_ST | + WM8960_BUFDCOPEN | WM8960_BUFIOEN); + + /* Enable & ramp VMID at 2x50k */ + snd_soc_update_bits(codec, WM8960_POWER1, 0x80, 0x80); + msleep(100); + + /* Enable VREF */ + snd_soc_update_bits(codec, WM8960_POWER1, WM8960_VREF, + WM8960_VREF); + + /* Disable anti-pop features */ + snd_soc_write(codec, WM8960_APOP1, WM8960_BUFIOEN); + } + + /* Set VMID to 2x250k */ + snd_soc_update_bits(codec, WM8960_POWER1, 0x180, 0x100); + break; + + case SND_SOC_BIAS_OFF: + /* Enable anti-pop features */ + snd_soc_write(codec, WM8960_APOP1, + WM8960_POBCTRL | WM8960_SOFT_ST | + WM8960_BUFDCOPEN | WM8960_BUFIOEN); + + /* Disable VMID and VREF, let them discharge */ + snd_soc_write(codec, WM8960_POWER1, 0); + msleep(600); + break; + } + + codec->dapm.bias_level = level; + + return 0; +} + +static int wm8960_set_bias_level_capless(struct snd_soc_codec *codec, + enum snd_soc_bias_level level) +{ + struct wm8960_priv *wm8960 = snd_soc_codec_get_drvdata(codec); + int reg; + + switch (level) { + case SND_SOC_BIAS_ON: + break; + + case SND_SOC_BIAS_PREPARE: + switch (codec->dapm.bias_level) { + case SND_SOC_BIAS_STANDBY: + /* Enable anti pop mode */ + snd_soc_update_bits(codec, WM8960_APOP1, + WM8960_POBCTRL | WM8960_SOFT_ST | + WM8960_BUFDCOPEN, + WM8960_POBCTRL | WM8960_SOFT_ST | + WM8960_BUFDCOPEN); + + /* Enable LOUT1, ROUT1 and OUT3 if they're enabled */ + reg = 0; + if (wm8960->lout1 && wm8960->lout1->power) + reg |= WM8960_PWR2_LOUT1; + if (wm8960->rout1 && wm8960->rout1->power) + reg |= WM8960_PWR2_ROUT1; + if (wm8960->out3 && wm8960->out3->power) + reg |= WM8960_PWR2_OUT3; + snd_soc_update_bits(codec, WM8960_POWER2, + WM8960_PWR2_LOUT1 | + WM8960_PWR2_ROUT1 | + WM8960_PWR2_OUT3, reg); + + /* Enable VMID at 2*50k */ + snd_soc_update_bits(codec, WM8960_POWER1, + WM8960_VMID_MASK, 0x80); + + /* Ramp */ + msleep(100); + + /* Enable VREF */ + snd_soc_update_bits(codec, WM8960_POWER1, + WM8960_VREF, WM8960_VREF); + + msleep(100); + break; + + case SND_SOC_BIAS_ON: + /* Enable anti-pop mode */ + snd_soc_update_bits(codec, WM8960_APOP1, + WM8960_POBCTRL | WM8960_SOFT_ST | + WM8960_BUFDCOPEN, + WM8960_POBCTRL | WM8960_SOFT_ST | + WM8960_BUFDCOPEN); + + /* Disable VMID and VREF */ + snd_soc_update_bits(codec, WM8960_POWER1, + WM8960_VREF | WM8960_VMID_MASK, 0); + break; + + case SND_SOC_BIAS_OFF: + snd_soc_cache_sync(codec); + break; + default: + break; + } + break; + + case SND_SOC_BIAS_STANDBY: + switch (codec->dapm.bias_level) { + case SND_SOC_BIAS_PREPARE: + /* Disable HP discharge */ + snd_soc_update_bits(codec, WM8960_APOP2, + WM8960_DISOP | WM8960_DRES_MASK, + 0); + + /* Disable anti-pop features */ + snd_soc_update_bits(codec, WM8960_APOP1, + WM8960_POBCTRL | WM8960_SOFT_ST | + WM8960_BUFDCOPEN, + WM8960_POBCTRL | WM8960_SOFT_ST | + WM8960_BUFDCOPEN); + break; + + default: + break; + } + break; + + case SND_SOC_BIAS_OFF: + break; + } + + codec->dapm.bias_level = level; + + return 0; +} + +/* PLL divisors */ +struct _pll_div { + u32 pre_div:1; + u32 n:4; + u32 k:24; +}; + +/* The size in bits of the pll divide multiplied by 10 + * to allow rounding later */ +#define FIXED_PLL_SIZE ((1 << 24) * 10) + +static int pll_factors(unsigned int source, unsigned int target, + struct _pll_div *pll_div) +{ + unsigned long long Kpart; + unsigned int K, Ndiv, Nmod; + + pr_debug("WM8960 PLL: setting %dHz->%dHz\n", source, target); + + /* Scale up target to PLL operating frequency */ + target *= 4; + + Ndiv = target / source; + if (Ndiv < 6) { + source >>= 1; + pll_div->pre_div = 1; + Ndiv = target / source; + } else + pll_div->pre_div = 0; + + if ((Ndiv < 6) || (Ndiv > 12)) { + pr_err("WM8960 PLL: Unsupported N=%d\n", Ndiv); + return -EINVAL; + } + + pll_div->n = Ndiv; + Nmod = target % source; + Kpart = FIXED_PLL_SIZE * (long long)Nmod; + + do_div(Kpart, source); + + K = Kpart & 0xFFFFFFFF; + + /* Check if we need to round */ + if ((K % 10) >= 5) + K += 5; + + /* Move down to proper range now rounding is done */ + K /= 10; + + pll_div->k = K; + + pr_debug("WM8960 PLL: N=%x K=%x pre_div=%d\n", + pll_div->n, pll_div->k, pll_div->pre_div); + + return 0; +} + +static int wm8960_set_dai_pll(struct snd_soc_dai *codec_dai, int pll_id, + int source, unsigned int freq_in, unsigned int freq_out) +{ + struct snd_soc_codec *codec = codec_dai->codec; + u16 reg; + static struct _pll_div pll_div; + int ret; + + if (freq_in && freq_out) { + ret = pll_factors(freq_in, freq_out, &pll_div); + if (ret != 0) + return ret; + } + + /* Disable the PLL: even if we are changing the frequency the + * PLL needs to be disabled while we do so. */ + snd_soc_update_bits(codec, WM8960_CLOCK1, 0x1, 0); + snd_soc_update_bits(codec, WM8960_POWER2, 0x1, 0); + + if (!freq_in || !freq_out) + return 0; + + reg = snd_soc_read(codec, WM8960_PLL1) & ~0x3f; + reg |= pll_div.pre_div << 4; + reg |= pll_div.n; + + if (pll_div.k) { + reg |= 0x20; + + snd_soc_write(codec, WM8960_PLL2, (pll_div.k >> 18) & 0x3f); + snd_soc_write(codec, WM8960_PLL3, (pll_div.k >> 9) & 0x1ff); + snd_soc_write(codec, WM8960_PLL4, pll_div.k & 0x1ff); + } + snd_soc_write(codec, WM8960_PLL1, reg); + + /* Turn it on */ + snd_soc_update_bits(codec, WM8960_POWER2, 0x1, 0x1); + msleep(250); + snd_soc_update_bits(codec, WM8960_CLOCK1, 0x1, 0x1); + + return 0; +} + +static int wm8960_set_dai_clkdiv(struct snd_soc_dai *codec_dai, + int div_id, int div) +{ + struct snd_soc_codec *codec = codec_dai->codec; + u16 reg; + + switch (div_id) { + case WM8960_SYSCLKDIV: + reg = snd_soc_read(codec, WM8960_CLOCK1) & 0x1f9; + snd_soc_write(codec, WM8960_CLOCK1, reg | div); + break; + case WM8960_DACDIV: + reg = snd_soc_read(codec, WM8960_CLOCK1) & 0x1c7; + snd_soc_write(codec, WM8960_CLOCK1, reg | div); + break; + case WM8960_OPCLKDIV: + reg = snd_soc_read(codec, WM8960_PLL1) & 0x03f; + snd_soc_write(codec, WM8960_PLL1, reg | div); + break; + case WM8960_DCLKDIV: + reg = snd_soc_read(codec, WM8960_CLOCK2) & 0x03f; + snd_soc_write(codec, WM8960_CLOCK2, reg | div); + break; + case WM8960_TOCLKSEL: + reg = snd_soc_read(codec, WM8960_ADDCTL1) & 0x1fd; + snd_soc_write(codec, WM8960_ADDCTL1, reg | div); + break; + default: + return -EINVAL; + } + + return 0; +} + +static int wm8960_set_bias_level(struct snd_soc_codec *codec, + enum snd_soc_bias_level level) +{ + struct wm8960_priv *wm8960 = snd_soc_codec_get_drvdata(codec); + + return wm8960->set_bias_level(codec, level); +} + +#define WM8960_RATES SNDRV_PCM_RATE_8000_48000 + +#define WM8960_FORMATS \ + (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE | \ + SNDRV_PCM_FMTBIT_S24_LE) + +static const struct snd_soc_dai_ops wm8960_dai_ops = { + .hw_params = wm8960_hw_params, + .digital_mute = wm8960_mute, + .set_fmt = wm8960_set_dai_fmt, + .set_clkdiv = wm8960_set_dai_clkdiv, + .set_pll = wm8960_set_dai_pll, +}; + +static struct snd_soc_dai_driver wm8960_dai = { + .name = "wm8960-hifi", + .playback = { + .stream_name = "Playback", + .channels_min = 1, + .channels_max = 2, + .rates = WM8960_RATES, + .formats = WM8960_FORMATS,}, + .capture = { + .stream_name = "Capture", + .channels_min = 1, + .channels_max = 2, + .rates = WM8960_RATES, + .formats = WM8960_FORMATS,}, + .ops = &wm8960_dai_ops, + .symmetric_rates = 1, +}; + +static int wm8960_suspend(struct snd_soc_codec *codec) +{ + struct wm8960_priv *wm8960 = snd_soc_codec_get_drvdata(codec); + + wm8960->set_bias_level(codec, SND_SOC_BIAS_OFF); + return 0; +} + +static int wm8960_resume(struct snd_soc_codec *codec) +{ + struct wm8960_priv *wm8960 = snd_soc_codec_get_drvdata(codec); + + wm8960->set_bias_level(codec, SND_SOC_BIAS_STANDBY); + return 0; +} + +static int wm8960_probe(struct snd_soc_codec *codec) +{ + struct wm8960_priv *wm8960 = snd_soc_codec_get_drvdata(codec); + struct wm8960_data *pdata = dev_get_platdata(codec->dev); + int ret; + + wm8960->set_bias_level = wm8960_set_bias_level_out3; + + if (!pdata) { + dev_warn(codec->dev, "No platform data supplied\n"); + } else { + if (pdata->dres > WM8960_DRES_MAX) { + dev_err(codec->dev, "Invalid DRES: %d\n", pdata->dres); + pdata->dres = 0; + } + + if (pdata->capless) + wm8960->set_bias_level = wm8960_set_bias_level_capless; + } + + ret = snd_soc_codec_set_cache_io(codec, 7, 9, wm8960->control_type); + if (ret < 0) { + dev_err(codec->dev, "Failed to set cache I/O: %d\n", ret); + return ret; + } + + ret = wm8960_reset(codec); + if (ret < 0) { + dev_err(codec->dev, "Failed to issue reset\n"); + return ret; + } + + wm8960->set_bias_level(codec, SND_SOC_BIAS_STANDBY); + + /* Latch the update bits */ + snd_soc_update_bits(codec, WM8960_LINVOL, 0x100, 0x100); + snd_soc_update_bits(codec, WM8960_RINVOL, 0x100, 0x100); + snd_soc_update_bits(codec, WM8960_LADC, 0x100, 0x100); + snd_soc_update_bits(codec, WM8960_RADC, 0x100, 0x100); + snd_soc_update_bits(codec, WM8960_LDAC, 0x100, 0x100); + snd_soc_update_bits(codec, WM8960_RDAC, 0x100, 0x100); + snd_soc_update_bits(codec, WM8960_LOUT1, 0x100, 0x100); + snd_soc_update_bits(codec, WM8960_ROUT1, 0x100, 0x100); + snd_soc_update_bits(codec, WM8960_LOUT2, 0x100, 0x100); + snd_soc_update_bits(codec, WM8960_ROUT2, 0x100, 0x100); + + snd_soc_add_codec_controls(codec, wm8960_snd_controls, + ARRAY_SIZE(wm8960_snd_controls)); + wm8960_add_widgets(codec); + + return 0; +} + +/* power down chip */ +static int wm8960_remove(struct snd_soc_codec *codec) +{ + struct wm8960_priv *wm8960 = snd_soc_codec_get_drvdata(codec); + + wm8960->set_bias_level(codec, SND_SOC_BIAS_OFF); + return 0; +} + +static struct snd_soc_codec_driver soc_codec_dev_wm8960 = { + .probe = wm8960_probe, + .remove = wm8960_remove, + .suspend = wm8960_suspend, + .resume = wm8960_resume, + .set_bias_level = wm8960_set_bias_level, + .reg_cache_size = ARRAY_SIZE(wm8960_reg), + .reg_word_size = sizeof(u16), + .reg_cache_default = wm8960_reg, +}; + +static __devinit int wm8960_i2c_probe(struct i2c_client *i2c, + const struct i2c_device_id *id) +{ + struct wm8960_priv *wm8960; + int ret; + + wm8960 = devm_kzalloc(&i2c->dev, sizeof(struct wm8960_priv), + GFP_KERNEL); + if (wm8960 == NULL) + return -ENOMEM; + + i2c_set_clientdata(i2c, wm8960); + wm8960->control_type = SND_SOC_I2C; + + ret = snd_soc_register_codec(&i2c->dev, + &soc_codec_dev_wm8960, &wm8960_dai, 1); + + return ret; +} + +static __devexit int wm8960_i2c_remove(struct i2c_client *client) +{ + snd_soc_unregister_codec(&client->dev); + return 0; +} + +static const struct i2c_device_id wm8960_i2c_id[] = { + { "wm8960", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, wm8960_i2c_id); + +static struct i2c_driver wm8960_i2c_driver = { + .driver = { + .name = "wm8960", + .owner = THIS_MODULE, + }, + .probe = wm8960_i2c_probe, + .remove = __devexit_p(wm8960_i2c_remove), + .id_table = wm8960_i2c_id, +}; + +static int __init wm8960_modinit(void) +{ + int ret = 0; + ret = i2c_add_driver(&wm8960_i2c_driver); + if (ret != 0) { + printk(KERN_ERR "Failed to register WM8960 I2C driver: %d\n", + ret); + } + return ret; +} +module_init(wm8960_modinit); + +static void __exit wm8960_exit(void) +{ + i2c_del_driver(&wm8960_i2c_driver); +} +module_exit(wm8960_exit); + +MODULE_DESCRIPTION("ASoC WM8960 driver"); +MODULE_AUTHOR("Liam Girdwood"); +MODULE_LICENSE("GPL"); |