diff options
Diffstat (limited to 'sound/pci/hda/Kconfig')
| -rw-r--r-- | sound/pci/hda/Kconfig | 261 |
1 files changed, 261 insertions, 0 deletions
diff --git a/sound/pci/hda/Kconfig b/sound/pci/hda/Kconfig new file mode 100644 index 00000000..163b6b5d --- /dev/null +++ b/sound/pci/hda/Kconfig @@ -0,0 +1,261 @@ +menuconfig SND_HDA_INTEL + tristate "Intel HD Audio" + select SND_PCM + select SND_VMASTER + select SND_KCTL_JACK + help + Say Y here to include support for Intel "High Definition + Audio" (Azalia) and its compatible devices. + + This option enables the HD-audio controller. Don't forget + to choose the appropriate codec options below. + + To compile this driver as a module, choose M here: the module + will be called snd-hda-intel. + +if SND_HDA_INTEL + +config SND_HDA_PREALLOC_SIZE + int "Pre-allocated buffer size for HD-audio driver" + range 0 32768 + default 64 + help + Specifies the default pre-allocated buffer-size in kB for the + HD-audio driver. A larger buffer (e.g. 2048) is preferred + for systems using PulseAudio. The default 64 is chosen just + for compatibility reasons. + + Note that the pre-allocation size can be changed dynamically + via a proc file (/proc/asound/card*/pcm*/sub*/prealloc), too. + +config SND_HDA_HWDEP + bool "Build hwdep interface for HD-audio driver" + select SND_HWDEP + help + Say Y here to build a hwdep interface for HD-audio driver. + This interface can be used for out-of-band communication + with codecs for debugging purposes. + +config SND_HDA_RECONFIG + bool "Allow dynamic codec reconfiguration (EXPERIMENTAL)" + depends on SND_HDA_HWDEP && EXPERIMENTAL + help + Say Y here to enable the HD-audio codec re-configuration feature. + This adds the sysfs interfaces to allow user to clear the whole + codec configuration, change the codec setup, add extra verbs, + and re-configure the codec dynamically. + +config SND_HDA_INPUT_BEEP + bool "Support digital beep via input layer" + depends on INPUT=y || INPUT=SND_HDA_INTEL + help + Say Y here to build a digital beep interface for HD-audio + driver. This interface is used to generate digital beeps. + +config SND_HDA_INPUT_BEEP_MODE + int "Digital beep registration mode (0=off, 1=on, 2=mute sw on/off)" + depends on SND_HDA_INPUT_BEEP=y + default "1" + range 0 2 + help + Set 0 to disable the digital beep interface for HD-audio by default. + Set 1 to always enable the digital beep interface for HD-audio by + default. Set 2 to control the beep device registration to input + layer using a "Beep Switch" in mixer applications. + +config SND_HDA_INPUT_JACK + bool "Support jack plugging notification via input layer" + depends on INPUT=y || INPUT=SND + select SND_JACK + help + Say Y here to enable the jack plugging notification via + input layer. + +config SND_HDA_PATCH_LOADER + bool "Support initialization patch loading for HD-audio" + depends on EXPERIMENTAL + select FW_LOADER + select SND_HDA_HWDEP + select SND_HDA_RECONFIG + help + Say Y here to allow the HD-audio driver to load a pseudo + firmware file ("patch") for overriding the BIOS setup at + start up. The "patch" file can be specified via patch module + option, such as patch=hda-init. + + This option turns on hwdep and reconfig features automatically. + +config SND_HDA_CODEC_REALTEK + bool "Build Realtek HD-audio codec support" + default y + help + Say Y here to include Realtek HD-audio codec support in + snd-hda-intel driver, such as ALC880. + + When the HD-audio driver is built as a module, the codec + support code is also built as another module, + snd-hda-codec-realtek. + This module is automatically loaded at probing. + +config SND_HDA_ENABLE_REALTEK_QUIRKS + bool "Build static quirks for Realtek codecs" + depends on SND_HDA_CODEC_REALTEK + default y + help + Say Y here to build the static quirks codes for Realtek codecs. + If you need the "model" preset that the default BIOS auto-parser + can't handle, turn this option on. + + If your device works with model=auto option, basically you don't + need the quirk code. By turning this off, you can reduce the + module size quite a lot. + +config SND_HDA_CODEC_ANALOG + bool "Build Analog Device HD-audio codec support" + default y + help + Say Y here to include Analog Device HD-audio codec support in + snd-hda-intel driver, such as AD1986A. + + When the HD-audio driver is built as a module, the codec + support code is also built as another module, + snd-hda-codec-analog. + This module is automatically loaded at probing. + +config SND_HDA_CODEC_SIGMATEL + bool "Build IDT/Sigmatel HD-audio codec support" + default y + help + Say Y here to include IDT (Sigmatel) HD-audio codec support in + snd-hda-intel driver, such as STAC9200. + + When the HD-audio driver is built as a module, the codec + support code is also built as another module, + snd-hda-codec-idt. + This module is automatically loaded at probing. + +config SND_HDA_CODEC_VIA + bool "Build VIA HD-audio codec support" + default y + help + Say Y here to include VIA HD-audio codec support in + snd-hda-intel driver, such as VT1708. + + When the HD-audio driver is built as a module, the codec + support code is also built as another module, + snd-hda-codec-via. + This module is automatically loaded at probing. + +config SND_HDA_CODEC_HDMI + bool "Build HDMI/DisplayPort HD-audio codec support" + select SND_DYNAMIC_MINORS + default y + help + Say Y here to include HDMI and DisplayPort HD-audio codec + support in snd-hda-intel driver. This includes all AMD/ATI, + Intel and Nvidia HDMI/DisplayPort codecs. + + When the HD-audio driver is built as a module, the codec + support code is also built as another module, + snd-hda-codec-hdmi. + This module is automatically loaded at probing. + +config SND_HDA_CODEC_CIRRUS + bool "Build Cirrus Logic codec support" + depends on SND_HDA_INTEL + default y + help + Say Y here to include Cirrus Logic codec support in + snd-hda-intel driver, such as CS4206. + + When the HD-audio driver is built as a module, the codec + support code is also built as another module, + snd-hda-codec-cirrus. + This module is automatically loaded at probing. + +config SND_HDA_CODEC_CONEXANT + bool "Build Conexant HD-audio codec support" + default y + help + Say Y here to include Conexant HD-audio codec support in + snd-hda-intel driver, such as CX20549. + + When the HD-audio driver is built as a module, the codec + support code is also built as another module, + snd-hda-codec-conexant. + This module is automatically loaded at probing. + +config SND_HDA_CODEC_CA0110 + bool "Build Creative CA0110-IBG codec support" + depends on SND_HDA_INTEL + default y + help + Say Y here to include Creative CA0110-IBG codec support in + snd-hda-intel driver, found on some Creative X-Fi cards. + + When the HD-audio driver is built as a module, the codec + support code is also built as another module, + snd-hda-codec-ca0110. + This module is automatically loaded at probing. + +config SND_HDA_CODEC_CA0132 + bool "Build Creative CA0132 codec support" + depends on SND_HDA_INTEL + default y + help + Say Y here to include Creative CA0132 codec support in + snd-hda-intel driver. + + When the HD-audio driver is built as a module, the codec + support code is also built as another module, + snd-hda-codec-ca0132. + This module is automatically loaded at probing. + +config SND_HDA_CODEC_CMEDIA + bool "Build C-Media HD-audio codec support" + default y + help + Say Y here to include C-Media HD-audio codec support in + snd-hda-intel driver, such as CMI9880. + + When the HD-audio driver is built as a module, the codec + support code is also built as another module, + snd-hda-codec-cmedia. + This module is automatically loaded at probing. + +config SND_HDA_CODEC_SI3054 + bool "Build Silicon Labs 3054 HD-modem codec support" + default y + help + Say Y here to include Silicon Labs 3054 HD-modem codec + (and compatibles) support in snd-hda-intel driver. + + When the HD-audio driver is built as a module, the codec + support code is also built as another module, + snd-hda-codec-si3054. + This module is automatically loaded at probing. + +config SND_HDA_GENERIC + bool "Enable generic HD-audio codec parser" + default y + help + Say Y here to enable the generic HD-audio codec parser + in snd-hda-intel driver. + +config SND_HDA_POWER_SAVE + bool "Aggressive power-saving on HD-audio" + depends on PM + help + Say Y here to enable more aggressive power-saving mode on + HD-audio driver. The power-saving timeout can be configured + via power_save option or over sysfs on-the-fly. + +config SND_HDA_POWER_SAVE_DEFAULT + int "Default time-out for HD-audio power-save mode" + depends on SND_HDA_POWER_SAVE + default 0 + help + The default time-out value in seconds for HD-audio automatic + power-save mode. 0 means to disable the power-save mode. + +endif |