diff options
Diffstat (limited to 'sound/oss/dmasound/dmasound.h')
| -rw-r--r-- | sound/oss/dmasound/dmasound.h | 262 |
1 files changed, 262 insertions, 0 deletions
diff --git a/sound/oss/dmasound/dmasound.h b/sound/oss/dmasound/dmasound.h new file mode 100644 index 00000000..1308d8d3 --- /dev/null +++ b/sound/oss/dmasound/dmasound.h @@ -0,0 +1,262 @@ +#ifndef _dmasound_h_ +/* + * linux/sound/oss/dmasound/dmasound.h + * + * + * Minor numbers for the sound driver. + * + * Unfortunately Creative called the codec chip of SB as a DSP. For this + * reason the /dev/dsp is reserved for digitized audio use. There is a + * device for true DSP processors but it will be called something else. + * In v3.0 it's /dev/sndproc but this could be a temporary solution. + */ +#define _dmasound_h_ + +#include <linux/types.h> + +#define SND_NDEVS 256 /* Number of supported devices */ +#define SND_DEV_CTL 0 /* Control port /dev/mixer */ +#define SND_DEV_SEQ 1 /* Sequencer output /dev/sequencer (FM + synthesizer and MIDI output) */ +#define SND_DEV_MIDIN 2 /* Raw midi access */ +#define SND_DEV_DSP 3 /* Digitized voice /dev/dsp */ +#define SND_DEV_AUDIO 4 /* Sparc compatible /dev/audio */ +#define SND_DEV_DSP16 5 /* Like /dev/dsp but 16 bits/sample */ +#define SND_DEV_STATUS 6 /* /dev/sndstat */ +/* #7 not in use now. Was in 2.4. Free for use after v3.0. */ +#define SND_DEV_SEQ2 8 /* /dev/sequencer, level 2 interface */ +#define SND_DEV_SNDPROC 9 /* /dev/sndproc for programmable devices */ +#define SND_DEV_PSS SND_DEV_SNDPROC + +/* switch on various prinks */ +#define DEBUG_DMASOUND 1 + +#define MAX_AUDIO_DEV 5 +#define MAX_MIXER_DEV 4 +#define MAX_SYNTH_DEV 3 +#define MAX_MIDI_DEV 6 +#define MAX_TIMER_DEV 3 + +#define MAX_CATCH_RADIUS 10 + +#define le2be16(x) (((x)<<8 & 0xff00) | ((x)>>8 & 0x00ff)) +#define le2be16dbl(x) (((x)<<8 & 0xff00ff00) | ((x)>>8 & 0x00ff00ff)) + +#define IOCTL_IN(arg, ret) \ + do { int error = get_user(ret, (int __user *)(arg)); \ + if (error) return error; \ + } while (0) +#define IOCTL_OUT(arg, ret) ioctl_return((int __user *)(arg), ret) + +static inline int ioctl_return(int __user *addr, int value) +{ + return value < 0 ? value : put_user(value, addr); +} + + + /* + * Configuration + */ + +#undef HAS_8BIT_TABLES + +#if defined(CONFIG_DMASOUND_ATARI) || defined(CONFIG_DMASOUND_ATARI_MODULE) ||\ + defined(CONFIG_DMASOUND_PAULA) || defined(CONFIG_DMASOUND_PAULA_MODULE) ||\ + defined(CONFIG_DMASOUND_Q40) || defined(CONFIG_DMASOUND_Q40_MODULE) +#define HAS_8BIT_TABLES +#define MIN_BUFFERS 4 +#define MIN_BUFSIZE (1<<12) /* in bytes (- where does this come from ?) */ +#define MIN_FRAG_SIZE 8 /* not 100% sure about this */ +#define MAX_BUFSIZE (1<<17) /* Limit for Amiga is 128 kb */ +#define MAX_FRAG_SIZE 15 /* allow *4 for mono-8 => stereo-16 (for multi) */ + +#else /* is pmac and multi is off */ + +#define MIN_BUFFERS 2 +#define MIN_BUFSIZE (1<<8) /* in bytes */ +#define MIN_FRAG_SIZE 8 +#define MAX_BUFSIZE (1<<18) /* this is somewhat arbitrary for pmac */ +#define MAX_FRAG_SIZE 16 /* need to allow *4 for mono-8 => stereo-16 */ +#endif + +#define DEFAULT_N_BUFFERS 4 +#define DEFAULT_BUFF_SIZE (1<<15) + + /* + * Initialization + */ + +extern int dmasound_init(void); +#ifdef MODULE +extern void dmasound_deinit(void); +#else +#define dmasound_deinit() do { } while (0) +#endif + +/* description of the set-up applies to either hard or soft settings */ + +typedef struct { + int format; /* AFMT_* */ + int stereo; /* 0 = mono, 1 = stereo */ + int size; /* 8/16 bit*/ + int speed; /* speed */ +} SETTINGS; + + /* + * Machine definitions + */ + +typedef struct { + const char *name; + const char *name2; + struct module *owner; + void *(*dma_alloc)(unsigned int, gfp_t); + void (*dma_free)(void *, unsigned int); + int (*irqinit)(void); +#ifdef MODULE + void (*irqcleanup)(void); +#endif + void (*init)(void); + void (*silence)(void); + int (*setFormat)(int); + int (*setVolume)(int); + int (*setBass)(int); + int (*setTreble)(int); + int (*setGain)(int); + void (*play)(void); + void (*record)(void); /* optional */ + void (*mixer_init)(void); /* optional */ + int (*mixer_ioctl)(u_int, u_long); /* optional */ + int (*write_sq_setup)(void); /* optional */ + int (*read_sq_setup)(void); /* optional */ + int (*sq_open)(fmode_t); /* optional */ + int (*state_info)(char *, size_t); /* optional */ + void (*abort_read)(void); /* optional */ + int min_dsp_speed; + int max_dsp_speed; + int version ; + int hardware_afmts ; /* OSS says we only return h'ware info */ + /* when queried via SNDCTL_DSP_GETFMTS */ + int capabilities ; /* low-level reply to SNDCTL_DSP_GETCAPS */ + SETTINGS default_hard ; /* open() or init() should set something valid */ + SETTINGS default_soft ; /* you can make it look like old OSS, if you want to */ +} MACHINE; + + /* + * Low level stuff + */ + +typedef struct { + ssize_t (*ct_ulaw)(const u_char __user *, size_t, u_char *, ssize_t *, ssize_t); + ssize_t (*ct_alaw)(const u_char __user *, size_t, u_char *, ssize_t *, ssize_t); + ssize_t (*ct_s8)(const u_char __user *, size_t, u_char *, ssize_t *, ssize_t); + ssize_t (*ct_u8)(const u_char __user *, size_t, u_char *, ssize_t *, ssize_t); + ssize_t (*ct_s16be)(const u_char __user *, size_t, u_char *, ssize_t *, ssize_t); + ssize_t (*ct_u16be)(const u_char __user *, size_t, u_char *, ssize_t *, ssize_t); + ssize_t (*ct_s16le)(const u_char __user *, size_t, u_char *, ssize_t *, ssize_t); + ssize_t (*ct_u16le)(const u_char __user *, size_t, u_char *, ssize_t *, ssize_t); +} TRANS; + +struct sound_settings { + MACHINE mach; /* machine dependent things */ + SETTINGS hard; /* hardware settings */ + SETTINGS soft; /* software settings */ + SETTINGS dsp; /* /dev/dsp default settings */ + TRANS *trans_write; /* supported translations */ + int volume_left; /* volume (range is machine dependent) */ + int volume_right; + int bass; /* tone (range is machine dependent) */ + int treble; + int gain; + int minDev; /* minor device number currently open */ + spinlock_t lock; +}; + +extern struct sound_settings dmasound; + +#ifdef HAS_8BIT_TABLES +extern char dmasound_ulaw2dma8[]; +extern char dmasound_alaw2dma8[]; +#endif + + /* + * Mid level stuff + */ + +static inline int dmasound_set_volume(int volume) +{ + return dmasound.mach.setVolume(volume); +} + +static inline int dmasound_set_bass(int bass) +{ + return dmasound.mach.setBass ? dmasound.mach.setBass(bass) : 50; +} + +static inline int dmasound_set_treble(int treble) +{ + return dmasound.mach.setTreble ? dmasound.mach.setTreble(treble) : 50; +} + +static inline int dmasound_set_gain(int gain) +{ + return dmasound.mach.setGain ? dmasound.mach.setGain(gain) : 100; +} + + + /* + * Sound queue stuff, the heart of the driver + */ + +struct sound_queue { + /* buffers allocated for this queue */ + int numBufs; /* real limits on what the user can have */ + int bufSize; /* in bytes */ + char **buffers; + + /* current parameters */ + int locked ; /* params cannot be modified when != 0 */ + int user_frags ; /* user requests this many */ + int user_frag_size ; /* of this size */ + int max_count; /* actual # fragments <= numBufs */ + int block_size; /* internal block size in bytes */ + int max_active; /* in-use fragments <= max_count */ + + /* it shouldn't be necessary to declare any of these volatile */ + int front, rear, count; + int rear_size; + /* + * The use of the playing field depends on the hardware + * + * Atari, PMac: The number of frames that are loaded/playing + * + * Amiga: Bit 0 is set: a frame is loaded + * Bit 1 is set: a frame is playing + */ + int active; + wait_queue_head_t action_queue, open_queue, sync_queue; + int non_blocking; + int busy, syncing, xruns, died; +}; + +#define SLEEP(queue) interruptible_sleep_on_timeout(&queue, HZ) +#define WAKE_UP(queue) (wake_up_interruptible(&queue)) + +extern struct sound_queue dmasound_write_sq; +#define write_sq dmasound_write_sq + +extern int dmasound_catchRadius; +#define catchRadius dmasound_catchRadius + +/* define the value to be put in the byte-swap reg in mac-io + when we want it to swap for us. +*/ +#define BS_VAL 1 + +#define SW_INPUT_VOLUME_SCALE 4 +#define SW_INPUT_VOLUME_DEFAULT (128 / SW_INPUT_VOLUME_SCALE) + +extern int expand_read_bal; /* Balance factor for reading */ +extern uint software_input_volume; /* software implemented recording volume! */ + +#endif /* _dmasound_h_ */ |