diff options
Diffstat (limited to 'include/scsi/osd_initiator.h')
| -rw-r--r-- | include/scsi/osd_initiator.h | 515 |
1 files changed, 515 insertions, 0 deletions
diff --git a/include/scsi/osd_initiator.h b/include/scsi/osd_initiator.h new file mode 100644 index 00000000..572fb549 --- /dev/null +++ b/include/scsi/osd_initiator.h @@ -0,0 +1,515 @@ +/* + * osd_initiator.h - OSD initiator API definition + * + * Copyright (C) 2008 Panasas Inc. All rights reserved. + * + * Authors: + * Boaz Harrosh <bharrosh@panasas.com> + * Benny Halevy <bhalevy@panasas.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * + */ +#ifndef __OSD_INITIATOR_H__ +#define __OSD_INITIATOR_H__ + +#include "osd_protocol.h" +#include "osd_types.h" + +#include <linux/blkdev.h> +#include <scsi/scsi_device.h> + +/* Note: "NI" in comments below means "Not Implemented yet" */ + +/* Configure of code: + * #undef if you *don't* want OSD v1 support in runtime. + * If #defined the initiator will dynamically configure to encode OSD v1 + * CDB's if the target is detected to be OSD v1 only. + * OSD v2 only commands, options, and attributes will be ignored if target + * is v1 only. + * If #defined will result in bigger/slower code (OK Slower maybe not) + * Q: Should this be CONFIG_SCSI_OSD_VER1_SUPPORT and set from Kconfig? + */ +#define OSD_VER1_SUPPORT y + +enum osd_std_version { + OSD_VER_NONE = 0, + OSD_VER1 = 1, + OSD_VER2 = 2, +}; + +/* + * Object-based Storage Device. + * This object represents an OSD device. + * It is not a full linux device in any way. It is only + * a place to hang resources associated with a Linux + * request Q and some default properties. + */ +struct osd_dev { + struct scsi_device *scsi_device; + unsigned def_timeout; + +#ifdef OSD_VER1_SUPPORT + enum osd_std_version version; +#endif +}; + +/* Unique Identification of an OSD device */ +struct osd_dev_info { + unsigned systemid_len; + u8 systemid[OSD_SYSTEMID_LEN]; + unsigned osdname_len; + u8 *osdname; +}; + +/* Retrieve/return osd_dev(s) for use by Kernel clients + * Use IS_ERR/ERR_PTR on returned "osd_dev *". + */ +struct osd_dev *osduld_path_lookup(const char *dev_name); +struct osd_dev *osduld_info_lookup(const struct osd_dev_info *odi); +void osduld_put_device(struct osd_dev *od); + +const struct osd_dev_info *osduld_device_info(struct osd_dev *od); +bool osduld_device_same(struct osd_dev *od, const struct osd_dev_info *odi); + +/* Add/remove test ioctls from external modules */ +typedef int (do_test_fn)(struct osd_dev *od, unsigned cmd, unsigned long arg); +int osduld_register_test(unsigned ioctl, do_test_fn *do_test); +void osduld_unregister_test(unsigned ioctl); + +/* These are called by uld at probe time */ +void osd_dev_init(struct osd_dev *od, struct scsi_device *scsi_device); +void osd_dev_fini(struct osd_dev *od); + +/** + * osd_auto_detect_ver - Detect the OSD version, return Unique Identification + * + * @od: OSD target lun handle + * @caps: Capabilities authorizing OSD root read attributes access + * @odi: Retrieved information uniquely identifying the osd target lun + * Note: odi->osdname must be kfreed by caller. + * + * Auto detects the OSD version of the OSD target and sets the @od + * accordingly. Meanwhile also returns the "system id" and "osd name" root + * attributes which uniquely identify the OSD target. This member is usually + * called by the ULD. ULD users should call osduld_device_info(). + * This rutine allocates osd requests and memory at GFP_KERNEL level and might + * sleep. + */ +int osd_auto_detect_ver(struct osd_dev *od, + void *caps, struct osd_dev_info *odi); + +static inline struct request_queue *osd_request_queue(struct osd_dev *od) +{ + return od->scsi_device->request_queue; +} + +/* we might want to use function vector in the future */ +static inline void osd_dev_set_ver(struct osd_dev *od, enum osd_std_version v) +{ +#ifdef OSD_VER1_SUPPORT + od->version = v; +#endif +} + +static inline bool osd_dev_is_ver1(struct osd_dev *od) +{ +#ifdef OSD_VER1_SUPPORT + return od->version == OSD_VER1; +#else + return false; +#endif +} + +struct osd_request; +typedef void (osd_req_done_fn)(struct osd_request *or, void *private); + +struct osd_request { + struct osd_cdb cdb; + struct osd_data_out_integrity_info out_data_integ; + struct osd_data_in_integrity_info in_data_integ; + + struct osd_dev *osd_dev; + struct request *request; + + struct _osd_req_data_segment { + void *buff; + unsigned alloc_size; /* 0 here means: don't call kfree */ + unsigned total_bytes; + } cdb_cont, set_attr, enc_get_attr, get_attr; + + struct _osd_io_info { + struct bio *bio; + u64 total_bytes; + u64 residual; + struct request *req; + struct _osd_req_data_segment *last_seg; + u8 *pad_buff; + } out, in; + + gfp_t alloc_flags; + unsigned timeout; + unsigned retries; + unsigned sense_len; + u8 sense[OSD_MAX_SENSE_LEN]; + enum osd_attributes_mode attributes_mode; + + osd_req_done_fn *async_done; + void *async_private; + int async_error; + int req_errors; +}; + +static inline bool osd_req_is_ver1(struct osd_request *or) +{ + return osd_dev_is_ver1(or->osd_dev); +} + +/* + * How to use the osd library: + * + * osd_start_request + * Allocates a request. + * + * osd_req_* + * Call one of, to encode the desired operation. + * + * osd_add_{get,set}_attr + * Optionally add attributes to the CDB, list or page mode. + * + * osd_finalize_request + * Computes final data out/in offsets and signs the request, + * making it ready for execution. + * + * osd_execute_request + * May be called to execute it through the block layer. Other wise submit + * the associated block request in some other way. + * + * After execution: + * osd_req_decode_sense + * Decodes sense information to verify execution results. + * + * osd_req_decode_get_attr + * Retrieve osd_add_get_attr_list() values if used. + * + * osd_end_request + * Must be called to deallocate the request. + */ + +/** + * osd_start_request - Allocate and initialize an osd_request + * + * @osd_dev: OSD device that holds the scsi-device and default values + * that the request is associated with. + * @gfp: The allocation flags to use for request allocation, and all + * subsequent allocations. This will be stored at + * osd_request->alloc_flags, can be changed by user later + * + * Allocate osd_request and initialize all members to the + * default/initial state. + */ +struct osd_request *osd_start_request(struct osd_dev *od, gfp_t gfp); + +enum osd_req_options { + OSD_REQ_FUA = 0x08, /* Force Unit Access */ + OSD_REQ_DPO = 0x10, /* Disable Page Out */ + + OSD_REQ_BYPASS_TIMESTAMPS = 0x80, +}; + +/** + * osd_finalize_request - Sign request and prepare request for execution + * + * @or: osd_request to prepare + * @options: combination of osd_req_options bit flags or 0. + * @cap: A Pointer to an OSD_CAP_LEN bytes buffer that is received from + * The security manager as capabilities for this cdb. + * @cap_key: The cryptographic key used to sign the cdb/data. Can be null + * if NOSEC is used. + * + * The actual request and bios are only allocated here, so are the get_attr + * buffers that will receive the returned attributes. Copy's @cap to cdb. + * Sign the cdb/data with @cap_key. + */ +int osd_finalize_request(struct osd_request *or, + u8 options, const void *cap, const u8 *cap_key); + +/** + * osd_execute_request - Execute the request synchronously through block-layer + * + * @or: osd_request to Executed + * + * Calls blk_execute_rq to q the command and waits for completion. + */ +int osd_execute_request(struct osd_request *or); + +/** + * osd_execute_request_async - Execute the request without waitting. + * + * @or: - osd_request to Executed + * @done: (Optional) - Called at end of execution + * @private: - Will be passed to @done function + * + * Calls blk_execute_rq_nowait to queue the command. When execution is done + * optionally calls @done with @private as parameter. @or->async_error will + * have the return code + */ +int osd_execute_request_async(struct osd_request *or, + osd_req_done_fn *done, void *private); + +/** + * osd_req_decode_sense_full - Decode sense information after execution. + * + * @or: - osd_request to examine + * @osi - Receives a more detailed error report information (optional). + * @silent - Do not print to dmsg (Even if enabled) + * @bad_obj_list - Some commands act on multiple objects. Failed objects will + * be received here (optional) + * @max_obj - Size of @bad_obj_list. + * @bad_attr_list - List of failing attributes (optional) + * @max_attr - Size of @bad_attr_list. + * + * After execution, osd_request results are analyzed using this function. The + * return code is the final disposition on the error. So it is possible that a + * CHECK_CONDITION was returned from target but this will return NO_ERROR, for + * example on recovered errors. All parameters are optional if caller does + * not need any returned information. + * Note: This function will also dump the error to dmsg according to settings + * of the SCSI_OSD_DPRINT_SENSE Kconfig value. Set @silent if you know the + * command would routinely fail, to not spam the dmsg file. + */ + +/** + * osd_err_priority - osd categorized return codes in ascending severity. + * + * The categories are borrowed from the pnfs_osd_errno enum. + * See comments for translated Linux codes returned by osd_req_decode_sense. + */ +enum osd_err_priority { + OSD_ERR_PRI_NO_ERROR = 0, + /* Recoverable, caller should clear_highpage() all pages */ + OSD_ERR_PRI_CLEAR_PAGES = 1, /* -EFAULT */ + OSD_ERR_PRI_RESOURCE = 2, /* -ENOMEM */ + OSD_ERR_PRI_BAD_CRED = 3, /* -EINVAL */ + OSD_ERR_PRI_NO_ACCESS = 4, /* -EACCES */ + OSD_ERR_PRI_UNREACHABLE = 5, /* any other */ + OSD_ERR_PRI_NOT_FOUND = 6, /* -ENOENT */ + OSD_ERR_PRI_NO_SPACE = 7, /* -ENOSPC */ + OSD_ERR_PRI_EIO = 8, /* -EIO */ +}; + +struct osd_sense_info { + enum osd_err_priority osd_err_pri; + + int key; /* one of enum scsi_sense_keys */ + int additional_code ; /* enum osd_additional_sense_codes */ + union { /* Sense specific information */ + u16 sense_info; + u16 cdb_field_offset; /* scsi_invalid_field_in_cdb */ + }; + union { /* Command specific information */ + u64 command_info; + }; + + u32 not_initiated_command_functions; /* osd_command_functions_bits */ + u32 completed_command_functions; /* osd_command_functions_bits */ + struct osd_obj_id obj; + struct osd_attr attr; +}; + +int osd_req_decode_sense_full(struct osd_request *or, + struct osd_sense_info *osi, bool silent, + struct osd_obj_id *bad_obj_list, int max_obj, + struct osd_attr *bad_attr_list, int max_attr); + +static inline int osd_req_decode_sense(struct osd_request *or, + struct osd_sense_info *osi) +{ + return osd_req_decode_sense_full(or, osi, false, NULL, 0, NULL, 0); +} + +/** + * osd_end_request - return osd_request to free store + * + * @or: osd_request to free + * + * Deallocate all osd_request resources (struct req's, BIOs, buffers, etc.) + */ +void osd_end_request(struct osd_request *or); + +/* + * CDB Encoding + * + * Note: call only one of the following methods. + */ + +/* + * Device commands + */ +void osd_req_set_master_seed_xchg(struct osd_request *or, ...);/* NI */ +void osd_req_set_master_key(struct osd_request *or, ...);/* NI */ + +void osd_req_format(struct osd_request *or, u64 tot_capacity); + +/* list all partitions + * @list header must be initialized to zero on first run. + * + * Call osd_is_obj_list_done() to find if we got the complete list. + */ +int osd_req_list_dev_partitions(struct osd_request *or, + osd_id initial_id, struct osd_obj_id_list *list, unsigned nelem); + +void osd_req_flush_obsd(struct osd_request *or, + enum osd_options_flush_scope_values); + +void osd_req_perform_scsi_command(struct osd_request *or, + const u8 *cdb, ...);/* NI */ +void osd_req_task_management(struct osd_request *or, ...);/* NI */ + +/* + * Partition commands + */ +void osd_req_create_partition(struct osd_request *or, osd_id partition); +void osd_req_remove_partition(struct osd_request *or, osd_id partition); + +void osd_req_set_partition_key(struct osd_request *or, + osd_id partition, u8 new_key_id[OSD_CRYPTO_KEYID_SIZE], + u8 seed[OSD_CRYPTO_SEED_SIZE]);/* NI */ + +/* list all collections in the partition + * @list header must be init to zero on first run. + * + * Call osd_is_obj_list_done() to find if we got the complete list. + */ +int osd_req_list_partition_collections(struct osd_request *or, + osd_id partition, osd_id initial_id, struct osd_obj_id_list *list, + unsigned nelem); + +/* list all objects in the partition + * @list header must be init to zero on first run. + * + * Call osd_is_obj_list_done() to find if we got the complete list. + */ +int osd_req_list_partition_objects(struct osd_request *or, + osd_id partition, osd_id initial_id, struct osd_obj_id_list *list, + unsigned nelem); + +void osd_req_flush_partition(struct osd_request *or, + osd_id partition, enum osd_options_flush_scope_values); + +/* + * Collection commands + */ +void osd_req_create_collection(struct osd_request *or, + const struct osd_obj_id *);/* NI */ +void osd_req_remove_collection(struct osd_request *or, + const struct osd_obj_id *);/* NI */ + +/* list all objects in the collection */ +int osd_req_list_collection_objects(struct osd_request *or, + const struct osd_obj_id *, osd_id initial_id, + struct osd_obj_id_list *list, unsigned nelem); + +/* V2 only filtered list of objects in the collection */ +void osd_req_query(struct osd_request *or, ...);/* NI */ + +void osd_req_flush_collection(struct osd_request *or, + const struct osd_obj_id *, enum osd_options_flush_scope_values); + +void osd_req_get_member_attrs(struct osd_request *or, ...);/* V2-only NI */ +void osd_req_set_member_attrs(struct osd_request *or, ...);/* V2-only NI */ + +/* + * Object commands + */ +void osd_req_create_object(struct osd_request *or, struct osd_obj_id *); +void osd_req_remove_object(struct osd_request *or, struct osd_obj_id *); + +void osd_req_write(struct osd_request *or, + const struct osd_obj_id *obj, u64 offset, struct bio *bio, u64 len); +int osd_req_write_kern(struct osd_request *or, + const struct osd_obj_id *obj, u64 offset, void *buff, u64 len); +void osd_req_append(struct osd_request *or, + const struct osd_obj_id *, struct bio *data_out);/* NI */ +void osd_req_create_write(struct osd_request *or, + const struct osd_obj_id *, struct bio *data_out, u64 offset);/* NI */ +void osd_req_clear(struct osd_request *or, + const struct osd_obj_id *, u64 offset, u64 len);/* NI */ +void osd_req_punch(struct osd_request *or, + const struct osd_obj_id *, u64 offset, u64 len);/* V2-only NI */ + +void osd_req_flush_object(struct osd_request *or, + const struct osd_obj_id *, enum osd_options_flush_scope_values, + /*V2*/ u64 offset, /*V2*/ u64 len); + +void osd_req_read(struct osd_request *or, + const struct osd_obj_id *obj, u64 offset, struct bio *bio, u64 len); +int osd_req_read_kern(struct osd_request *or, + const struct osd_obj_id *obj, u64 offset, void *buff, u64 len); + +/* Scatter/Gather write/read commands */ +int osd_req_write_sg(struct osd_request *or, + const struct osd_obj_id *obj, struct bio *bio, + const struct osd_sg_entry *sglist, unsigned numentries); +int osd_req_read_sg(struct osd_request *or, + const struct osd_obj_id *obj, struct bio *bio, + const struct osd_sg_entry *sglist, unsigned numentries); +int osd_req_write_sg_kern(struct osd_request *or, + const struct osd_obj_id *obj, void **buff, + const struct osd_sg_entry *sglist, unsigned numentries); +int osd_req_read_sg_kern(struct osd_request *or, + const struct osd_obj_id *obj, void **buff, + const struct osd_sg_entry *sglist, unsigned numentries); + +/* + * Root/Partition/Collection/Object Attributes commands + */ + +/* get before set */ +void osd_req_get_attributes(struct osd_request *or, const struct osd_obj_id *); + +/* set before get */ +void osd_req_set_attributes(struct osd_request *or, const struct osd_obj_id *); + +/* + * Attributes appended to most commands + */ + +/* Attributes List mode (or V2 CDB) */ + /* + * TODO: In ver2 if at finalize time only one attr was set and no gets, + * then the Attributes CDB mode is used automatically to save IO. + */ + +/* set a list of attributes. */ +int osd_req_add_set_attr_list(struct osd_request *or, + const struct osd_attr *, unsigned nelem); + +/* get a list of attributes */ +int osd_req_add_get_attr_list(struct osd_request *or, + const struct osd_attr *, unsigned nelem); + +/* + * Attributes list decoding + * Must be called after osd_request.request was executed + * It is called in a loop to decode the returned get_attr + * (see osd_add_get_attr) + */ +int osd_req_decode_get_attr_list(struct osd_request *or, + struct osd_attr *, int *nelem, void **iterator); + +/* Attributes Page mode */ + +/* + * Read an attribute page and optionally set one attribute + * + * Retrieves the attribute page directly to a user buffer. + * @attr_page_data shall stay valid until end of execution. + * See osd_attributes.h for common page structures + */ +int osd_req_add_get_attr_page(struct osd_request *or, + u32 page_id, void *attr_page_data, unsigned max_page_len, + const struct osd_attr *set_one); + +#endif /* __OSD_LIB_H__ */ |