diff options
Diffstat (limited to 'include/scsi/fc/fc_fs.h')
-rw-r--r-- | include/scsi/fc/fc_fs.h | 348 |
1 files changed, 348 insertions, 0 deletions
diff --git a/include/scsi/fc/fc_fs.h b/include/scsi/fc/fc_fs.h new file mode 100644 index 00000000..50f28b14 --- /dev/null +++ b/include/scsi/fc/fc_fs.h @@ -0,0 +1,348 @@ +/* + * Copyright(c) 2007 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * + * Maintained at www.Open-FCoE.org + */ + +#ifndef _FC_FS_H_ +#define _FC_FS_H_ + +#include <linux/types.h> + +/* + * Fibre Channel Framing and Signalling definitions. + * From T11 FC-FS-2 Rev 0.90 - 9 August 2005. + */ + +/* + * Frame header + */ +struct fc_frame_header { + __u8 fh_r_ctl; /* routing control */ + __u8 fh_d_id[3]; /* Destination ID */ + + __u8 fh_cs_ctl; /* class of service control / pri */ + __u8 fh_s_id[3]; /* Source ID */ + + __u8 fh_type; /* see enum fc_fh_type below */ + __u8 fh_f_ctl[3]; /* frame control */ + + __u8 fh_seq_id; /* sequence ID */ + __u8 fh_df_ctl; /* data field control */ + __be16 fh_seq_cnt; /* sequence count */ + + __be16 fh_ox_id; /* originator exchange ID */ + __be16 fh_rx_id; /* responder exchange ID */ + __be32 fh_parm_offset; /* parameter or relative offset */ +}; + +#define FC_FRAME_HEADER_LEN 24 /* expected length of structure */ + +#define FC_MAX_PAYLOAD 2112U /* max payload length in bytes */ +#define FC_MIN_MAX_PAYLOAD 256U /* lower limit on max payload */ + +#define FC_MAX_FRAME (FC_MAX_PAYLOAD + FC_FRAME_HEADER_LEN) +#define FC_MIN_MAX_FRAME (FC_MIN_MAX_PAYLOAD + FC_FRAME_HEADER_LEN) + +/* + * fh_r_ctl - Routing control definitions. + */ + /* + * FC-4 device_data. + */ +enum fc_rctl { + FC_RCTL_DD_UNCAT = 0x00, /* uncategorized information */ + FC_RCTL_DD_SOL_DATA = 0x01, /* solicited data */ + FC_RCTL_DD_UNSOL_CTL = 0x02, /* unsolicited control */ + FC_RCTL_DD_SOL_CTL = 0x03, /* solicited control or reply */ + FC_RCTL_DD_UNSOL_DATA = 0x04, /* unsolicited data */ + FC_RCTL_DD_DATA_DESC = 0x05, /* data descriptor */ + FC_RCTL_DD_UNSOL_CMD = 0x06, /* unsolicited command */ + FC_RCTL_DD_CMD_STATUS = 0x07, /* command status */ + +#define FC_RCTL_ILS_REQ FC_RCTL_DD_UNSOL_CTL /* ILS request */ +#define FC_RCTL_ILS_REP FC_RCTL_DD_SOL_CTL /* ILS reply */ + + /* + * Extended Link_Data + */ + FC_RCTL_ELS_REQ = 0x22, /* extended link services request */ + FC_RCTL_ELS_REP = 0x23, /* extended link services reply */ + FC_RCTL_ELS4_REQ = 0x32, /* FC-4 ELS request */ + FC_RCTL_ELS4_REP = 0x33, /* FC-4 ELS reply */ + /* + * Optional Extended Headers + */ + FC_RCTL_VFTH = 0x50, /* virtual fabric tagging header */ + FC_RCTL_IFRH = 0x51, /* inter-fabric routing header */ + FC_RCTL_ENCH = 0x52, /* encapsulation header */ + /* + * Basic Link Services fh_r_ctl values. + */ + FC_RCTL_BA_NOP = 0x80, /* basic link service NOP */ + FC_RCTL_BA_ABTS = 0x81, /* basic link service abort */ + FC_RCTL_BA_RMC = 0x82, /* remove connection */ + FC_RCTL_BA_ACC = 0x84, /* basic accept */ + FC_RCTL_BA_RJT = 0x85, /* basic reject */ + FC_RCTL_BA_PRMT = 0x86, /* dedicated connection preempted */ + /* + * Link Control Information. + */ + FC_RCTL_ACK_1 = 0xc0, /* acknowledge_1 */ + FC_RCTL_ACK_0 = 0xc1, /* acknowledge_0 */ + FC_RCTL_P_RJT = 0xc2, /* port reject */ + FC_RCTL_F_RJT = 0xc3, /* fabric reject */ + FC_RCTL_P_BSY = 0xc4, /* port busy */ + FC_RCTL_F_BSY = 0xc5, /* fabric busy to data frame */ + FC_RCTL_F_BSYL = 0xc6, /* fabric busy to link control frame */ + FC_RCTL_LCR = 0xc7, /* link credit reset */ + FC_RCTL_END = 0xc9, /* end */ +}; + /* incomplete list of definitions */ + +/* + * R_CTL names initializer. + * Please keep this matching the above definitions. + */ +#define FC_RCTL_NAMES_INIT { \ + [FC_RCTL_DD_UNCAT] = "uncat", \ + [FC_RCTL_DD_SOL_DATA] = "sol data", \ + [FC_RCTL_DD_UNSOL_CTL] = "unsol ctl", \ + [FC_RCTL_DD_SOL_CTL] = "sol ctl/reply", \ + [FC_RCTL_DD_UNSOL_DATA] = "unsol data", \ + [FC_RCTL_DD_DATA_DESC] = "data desc", \ + [FC_RCTL_DD_UNSOL_CMD] = "unsol cmd", \ + [FC_RCTL_DD_CMD_STATUS] = "cmd status", \ + [FC_RCTL_ELS_REQ] = "ELS req", \ + [FC_RCTL_ELS_REP] = "ELS rep", \ + [FC_RCTL_ELS4_REQ] = "FC-4 ELS req", \ + [FC_RCTL_ELS4_REP] = "FC-4 ELS rep", \ + [FC_RCTL_BA_NOP] = "BLS NOP", \ + [FC_RCTL_BA_ABTS] = "BLS abort", \ + [FC_RCTL_BA_RMC] = "BLS remove connection", \ + [FC_RCTL_BA_ACC] = "BLS accept", \ + [FC_RCTL_BA_RJT] = "BLS reject", \ + [FC_RCTL_BA_PRMT] = "BLS dedicated connection preempted", \ + [FC_RCTL_ACK_1] = "LC ACK_1", \ + [FC_RCTL_ACK_0] = "LC ACK_0", \ + [FC_RCTL_P_RJT] = "LC port reject", \ + [FC_RCTL_F_RJT] = "LC fabric reject", \ + [FC_RCTL_P_BSY] = "LC port busy", \ + [FC_RCTL_F_BSY] = "LC fabric busy to data frame", \ + [FC_RCTL_F_BSYL] = "LC fabric busy to link control frame",\ + [FC_RCTL_LCR] = "LC link credit reset", \ + [FC_RCTL_END] = "LC end", \ +} + +/* + * Well-known fabric addresses. + */ +enum fc_well_known_fid { + FC_FID_NONE = 0x000000, /* No destination */ + FC_FID_BCAST = 0xffffff, /* broadcast */ + FC_FID_FLOGI = 0xfffffe, /* fabric login */ + FC_FID_FCTRL = 0xfffffd, /* fabric controller */ + FC_FID_DIR_SERV = 0xfffffc, /* directory server */ + FC_FID_TIME_SERV = 0xfffffb, /* time server */ + FC_FID_MGMT_SERV = 0xfffffa, /* management server */ + FC_FID_QOS = 0xfffff9, /* QoS Facilitator */ + FC_FID_ALIASES = 0xfffff8, /* alias server (FC-PH2) */ + FC_FID_SEC_KEY = 0xfffff7, /* Security key dist. server */ + FC_FID_CLOCK = 0xfffff6, /* clock synch server */ + FC_FID_MCAST_SERV = 0xfffff5, /* multicast server */ +}; + +#define FC_FID_WELL_KNOWN_MAX 0xffffff /* highest well-known fabric ID */ +#define FC_FID_WELL_KNOWN_BASE 0xfffff5 /* start of well-known fabric ID */ + +/* + * Other well-known addresses, outside the above contiguous range. + */ +#define FC_FID_DOM_MGR 0xfffc00 /* domain manager base */ + +/* + * Fabric ID bytes. + */ +#define FC_FID_DOMAIN 0 +#define FC_FID_PORT 1 +#define FC_FID_LINK 2 + +/* + * fh_type codes + */ +enum fc_fh_type { + FC_TYPE_BLS = 0x00, /* basic link service */ + FC_TYPE_ELS = 0x01, /* extended link service */ + FC_TYPE_IP = 0x05, /* IP over FC, RFC 4338 */ + FC_TYPE_FCP = 0x08, /* SCSI FCP */ + FC_TYPE_CT = 0x20, /* Fibre Channel Services (FC-CT) */ + FC_TYPE_ILS = 0x22, /* internal link service */ +}; + +/* + * FC_TYPE names initializer. + * Please keep this matching the above definitions. + */ +#define FC_TYPE_NAMES_INIT { \ + [FC_TYPE_BLS] = "BLS", \ + [FC_TYPE_ELS] = "ELS", \ + [FC_TYPE_IP] = "IP", \ + [FC_TYPE_FCP] = "FCP", \ + [FC_TYPE_CT] = "CT", \ + [FC_TYPE_ILS] = "ILS", \ +} + +/* + * Exchange IDs. + */ +#define FC_XID_UNKNOWN 0xffff /* unknown exchange ID */ +#define FC_XID_MIN 0x0 /* supported min exchange ID */ +#define FC_XID_MAX 0xfffe /* supported max exchange ID */ + +/* + * fh_f_ctl - Frame control flags. + */ +#define FC_FC_EX_CTX (1 << 23) /* sent by responder to exchange */ +#define FC_FC_SEQ_CTX (1 << 22) /* sent by responder to sequence */ +#define FC_FC_FIRST_SEQ (1 << 21) /* first sequence of this exchange */ +#define FC_FC_LAST_SEQ (1 << 20) /* last sequence of this exchange */ +#define FC_FC_END_SEQ (1 << 19) /* last frame of sequence */ +#define FC_FC_END_CONN (1 << 18) /* end of class 1 connection pending */ +#define FC_FC_RES_B17 (1 << 17) /* reserved */ +#define FC_FC_SEQ_INIT (1 << 16) /* transfer of sequence initiative */ +#define FC_FC_X_ID_REASS (1 << 15) /* exchange ID has been changed */ +#define FC_FC_X_ID_INVAL (1 << 14) /* exchange ID invalidated */ + +#define FC_FC_ACK_1 (1 << 12) /* 13:12 = 1: ACK_1 expected */ +#define FC_FC_ACK_N (2 << 12) /* 13:12 = 2: ACK_N expected */ +#define FC_FC_ACK_0 (3 << 12) /* 13:12 = 3: ACK_0 expected */ + +#define FC_FC_RES_B11 (1 << 11) /* reserved */ +#define FC_FC_RES_B10 (1 << 10) /* reserved */ +#define FC_FC_RETX_SEQ (1 << 9) /* retransmitted sequence */ +#define FC_FC_UNI_TX (1 << 8) /* unidirectional transmit (class 1) */ +#define FC_FC_CONT_SEQ(i) ((i) << 6) +#define FC_FC_ABT_SEQ(i) ((i) << 4) +#define FC_FC_REL_OFF (1 << 3) /* parameter is relative offset */ +#define FC_FC_RES2 (1 << 2) /* reserved */ +#define FC_FC_FILL(i) ((i) & 3) /* 1:0: bytes of trailing fill */ + +/* + * BA_ACC payload. + */ +struct fc_ba_acc { + __u8 ba_seq_id_val; /* SEQ_ID validity */ +#define FC_BA_SEQ_ID_VAL 0x80 + __u8 ba_seq_id; /* SEQ_ID of seq last deliverable */ + __u8 ba_resvd[2]; /* reserved */ + __be16 ba_ox_id; /* OX_ID for aborted seq or exch */ + __be16 ba_rx_id; /* RX_ID for aborted seq or exch */ + __be16 ba_low_seq_cnt; /* low SEQ_CNT of aborted seq */ + __be16 ba_high_seq_cnt; /* high SEQ_CNT of aborted seq */ +}; + +/* + * BA_RJT: Basic Reject payload. + */ +struct fc_ba_rjt { + __u8 br_resvd; /* reserved */ + __u8 br_reason; /* reason code */ + __u8 br_explan; /* reason explanation */ + __u8 br_vendor; /* vendor unique code */ +}; + +/* + * BA_RJT reason codes. + * From FS-2. + */ +enum fc_ba_rjt_reason { + FC_BA_RJT_NONE = 0, /* in software this means no reject */ + FC_BA_RJT_INVL_CMD = 0x01, /* invalid command code */ + FC_BA_RJT_LOG_ERR = 0x03, /* logical error */ + FC_BA_RJT_LOG_BUSY = 0x05, /* logical busy */ + FC_BA_RJT_PROTO_ERR = 0x07, /* protocol error */ + FC_BA_RJT_UNABLE = 0x09, /* unable to perform request */ + FC_BA_RJT_VENDOR = 0xff, /* vendor-specific (see br_vendor) */ +}; + +/* + * BA_RJT reason code explanations. + */ +enum fc_ba_rjt_explan { + FC_BA_RJT_EXP_NONE = 0x00, /* no additional expanation */ + FC_BA_RJT_INV_XID = 0x03, /* invalid OX_ID-RX_ID combination */ + FC_BA_RJT_ABT = 0x05, /* sequence aborted, no seq info */ +}; + +/* + * P_RJT or F_RJT: Port Reject or Fabric Reject parameter field. + */ +struct fc_pf_rjt { + __u8 rj_action; /* reserved */ + __u8 rj_reason; /* reason code */ + __u8 rj_resvd; /* reserved */ + __u8 rj_vendor; /* vendor unique code */ +}; + +/* + * P_RJT and F_RJT reject reason codes. + */ +enum fc_pf_rjt_reason { + FC_RJT_NONE = 0, /* non-reject (reserved by standard) */ + FC_RJT_INVL_DID = 0x01, /* invalid destination ID */ + FC_RJT_INVL_SID = 0x02, /* invalid source ID */ + FC_RJT_P_UNAV_T = 0x03, /* port unavailable, temporary */ + FC_RJT_P_UNAV = 0x04, /* port unavailable, permanent */ + FC_RJT_CLS_UNSUP = 0x05, /* class not supported */ + FC_RJT_DEL_USAGE = 0x06, /* delimiter usage error */ + FC_RJT_TYPE_UNSUP = 0x07, /* type not supported */ + FC_RJT_LINK_CTL = 0x08, /* invalid link control */ + FC_RJT_R_CTL = 0x09, /* invalid R_CTL field */ + FC_RJT_F_CTL = 0x0a, /* invalid F_CTL field */ + FC_RJT_OX_ID = 0x0b, /* invalid originator exchange ID */ + FC_RJT_RX_ID = 0x0c, /* invalid responder exchange ID */ + FC_RJT_SEQ_ID = 0x0d, /* invalid sequence ID */ + FC_RJT_DF_CTL = 0x0e, /* invalid DF_CTL field */ + FC_RJT_SEQ_CNT = 0x0f, /* invalid SEQ_CNT field */ + FC_RJT_PARAM = 0x10, /* invalid parameter field */ + FC_RJT_EXCH_ERR = 0x11, /* exchange error */ + FC_RJT_PROTO = 0x12, /* protocol error */ + FC_RJT_LEN = 0x13, /* incorrect length */ + FC_RJT_UNEXP_ACK = 0x14, /* unexpected ACK */ + FC_RJT_FAB_CLASS = 0x15, /* class unsupported by fabric entity */ + FC_RJT_LOGI_REQ = 0x16, /* login required */ + FC_RJT_SEQ_XS = 0x17, /* excessive sequences attempted */ + FC_RJT_EXCH_EST = 0x18, /* unable to establish exchange */ + FC_RJT_FAB_UNAV = 0x1a, /* fabric unavailable */ + FC_RJT_VC_ID = 0x1b, /* invalid VC_ID (class 4) */ + FC_RJT_CS_CTL = 0x1c, /* invalid CS_CTL field */ + FC_RJT_INSUF_RES = 0x1d, /* insuff. resources for VC (Class 4) */ + FC_RJT_INVL_CLS = 0x1f, /* invalid class of service */ + FC_RJT_PREEMT_RJT = 0x20, /* preemption request rejected */ + FC_RJT_PREEMT_DIS = 0x21, /* preemption not enabled */ + FC_RJT_MCAST_ERR = 0x22, /* multicast error */ + FC_RJT_MCAST_ET = 0x23, /* multicast error terminate */ + FC_RJT_PRLI_REQ = 0x24, /* process login required */ + FC_RJT_INVL_ATT = 0x25, /* invalid attachment */ + FC_RJT_VENDOR = 0xff, /* vendor specific reject */ +}; + +/* default timeout values */ + +#define FC_DEF_E_D_TOV 2000UL +#define FC_DEF_R_A_TOV 10000UL + +#endif /* _FC_FS_H_ */ |