diff options
Diffstat (limited to 'include/scsi/fc/fc_fc2.h')
| -rw-r--r-- | include/scsi/fc/fc_fc2.h | 123 |
1 files changed, 123 insertions, 0 deletions
diff --git a/include/scsi/fc/fc_fc2.h b/include/scsi/fc/fc_fc2.h new file mode 100644 index 00000000..f87777d0 --- /dev/null +++ b/include/scsi/fc/fc_fc2.h @@ -0,0 +1,123 @@ +/* + * Copyright(c) 2007 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * + * Maintained at www.Open-FCoE.org + */ + +#ifndef _FC_FC2_H_ +#define _FC_FC2_H_ + +/* + * Fibre Channel Exchanges and Sequences. + */ +#ifndef PACKED +#define PACKED __attribute__ ((__packed__)) +#endif /* PACKED */ + + +/* + * Sequence Status Block. + * This format is set by the FC-FS standard and is sent over the wire. + * Note that the fields aren't all naturally aligned. + */ +struct fc_ssb { + __u8 ssb_seq_id; /* sequence ID */ + __u8 _ssb_resvd; + __be16 ssb_low_seq_cnt; /* lowest SEQ_CNT */ + + __be16 ssb_high_seq_cnt; /* highest SEQ_CNT */ + __be16 ssb_s_stat; /* sequence status flags */ + + __be16 ssb_err_seq_cnt; /* error SEQ_CNT */ + __u8 ssb_fh_cs_ctl; /* frame header CS_CTL */ + __be16 ssb_fh_ox_id; /* frame header OX_ID */ + __be16 ssb_rx_id; /* responder's exchange ID */ + __u8 _ssb_resvd2[2]; +} PACKED; + +/* + * The SSB should be 17 bytes. Since it's layout is somewhat strange, + * we define the size here so that code can ASSERT that the size comes out + * correct. + */ +#define FC_SSB_SIZE 17 /* length of fc_ssb for assert */ + +/* + * ssb_s_stat - flags from FC-FS-2 T11/1619-D Rev 0.90. + */ +#define SSB_ST_RESP (1 << 15) /* sequence responder */ +#define SSB_ST_ACTIVE (1 << 14) /* sequence is active */ +#define SSB_ST_ABNORMAL (1 << 12) /* abnormal ending condition */ + +#define SSB_ST_REQ_MASK (3 << 10) /* ACK, abort sequence condition */ +#define SSB_ST_REQ_CONT (0 << 10) +#define SSB_ST_REQ_ABORT (1 << 10) +#define SSB_ST_REQ_STOP (2 << 10) +#define SSB_ST_REQ_RETRANS (3 << 10) + +#define SSB_ST_ABTS (1 << 9) /* ABTS protocol completed */ +#define SSB_ST_RETRANS (1 << 8) /* retransmission completed */ +#define SSB_ST_TIMEOUT (1 << 7) /* sequence timed out by recipient */ +#define SSB_ST_P_RJT (1 << 6) /* P_RJT transmitted */ + +#define SSB_ST_CLASS_BIT 4 /* class of service field LSB */ +#define SSB_ST_CLASS_MASK 3 /* class of service mask */ +#define SSB_ST_ACK (1 << 3) /* ACK (EOFt or EOFdt) transmitted */ + +/* + * Exchange Status Block. + * This format is set by the FC-FS standard and is sent over the wire. + * Note that the fields aren't all naturally aligned. + */ +struct fc_esb { + __u8 esb_cs_ctl; /* CS_CTL for frame header */ + __be16 esb_ox_id; /* originator exchange ID */ + __be16 esb_rx_id; /* responder exchange ID */ + __be32 esb_orig_fid; /* fabric ID of originator */ + __be32 esb_resp_fid; /* fabric ID of responder */ + __be32 esb_e_stat; /* status */ + __u8 _esb_resvd[4]; + __u8 esb_service_params[112]; /* TBD */ + __u8 esb_seq_status[8]; /* sequence statuses, 8 bytes each */ +} __attribute__((packed)); + +/* + * Define expected size for ASSERTs. + * See comments on FC_SSB_SIZE. + */ +#define FC_ESB_SIZE (1 + 5*4 + 112 + 8) /* expected size */ + +/* + * esb_e_stat - flags from FC-FS-2 T11/1619-D Rev 0.90. + */ +#define ESB_ST_RESP (1 << 31) /* responder to exchange */ +#define ESB_ST_SEQ_INIT (1 << 30) /* port holds sequence initiaive */ +#define ESB_ST_COMPLETE (1 << 29) /* exchange is complete */ +#define ESB_ST_ABNORMAL (1 << 28) /* abnormal ending condition */ +#define ESB_ST_REC_QUAL (1 << 26) /* recovery qualifier active */ + +#define ESB_ST_ERRP_BIT 24 /* LSB for error policy */ +#define ESB_ST_ERRP_MASK (3 << 24) /* mask for error policy */ +#define ESB_ST_ERRP_MULT (0 << 24) /* abort, discard multiple sequences */ +#define ESB_ST_ERRP_SING (1 << 24) /* abort, discard single sequence */ +#define ESB_ST_ERRP_INF (2 << 24) /* process with infinite buffers */ +#define ESB_ST_ERRP_IMM (3 << 24) /* discard mult. with immed. retran. */ + +#define ESB_ST_OX_ID_INVL (1 << 23) /* originator XID invalid */ +#define ESB_ST_RX_ID_INVL (1 << 22) /* responder XID invalid */ +#define ESB_ST_PRI_INUSE (1 << 21) /* priority / preemption in use */ + +#endif /* _FC_FC2_H_ */ |