diff options
Diffstat (limited to 'include/linux/i2c-algo-pca.h')
-rw-r--r-- | include/linux/i2c-algo-pca.h | 70 |
1 files changed, 70 insertions, 0 deletions
diff --git a/include/linux/i2c-algo-pca.h b/include/linux/i2c-algo-pca.h new file mode 100644 index 00000000..1364d62e --- /dev/null +++ b/include/linux/i2c-algo-pca.h @@ -0,0 +1,70 @@ +#ifndef _LINUX_I2C_ALGO_PCA_H +#define _LINUX_I2C_ALGO_PCA_H + +/* Chips known to the pca algo */ +#define I2C_PCA_CHIP_9564 0x00 +#define I2C_PCA_CHIP_9665 0x01 + +/* Internal period for PCA9665 oscilator */ +#define I2C_PCA_OSC_PER 3 /* e10-8s */ + +/* Clock speeds for the bus for PCA9564*/ +#define I2C_PCA_CON_330kHz 0x00 +#define I2C_PCA_CON_288kHz 0x01 +#define I2C_PCA_CON_217kHz 0x02 +#define I2C_PCA_CON_146kHz 0x03 +#define I2C_PCA_CON_88kHz 0x04 +#define I2C_PCA_CON_59kHz 0x05 +#define I2C_PCA_CON_44kHz 0x06 +#define I2C_PCA_CON_36kHz 0x07 + +/* PCA9564 registers */ +#define I2C_PCA_STA 0x00 /* STATUS Read Only */ +#define I2C_PCA_TO 0x00 /* TIMEOUT Write Only */ +#define I2C_PCA_DAT 0x01 /* DATA Read/Write */ +#define I2C_PCA_ADR 0x02 /* OWN ADR Read/Write */ +#define I2C_PCA_CON 0x03 /* CONTROL Read/Write */ + +/* PCA9665 registers */ +#define I2C_PCA_INDPTR 0x00 /* INDIRECT Pointer Write Only */ +#define I2C_PCA_IND 0x02 /* INDIRECT Read/Write */ + +/* PCA9665 indirect registers */ +#define I2C_PCA_ICOUNT 0x00 /* Byte Count for buffered mode */ +#define I2C_PCA_IADR 0x01 /* OWN ADR */ +#define I2C_PCA_ISCLL 0x02 /* SCL LOW period */ +#define I2C_PCA_ISCLH 0x03 /* SCL HIGH period */ +#define I2C_PCA_ITO 0x04 /* TIMEOUT */ +#define I2C_PCA_IPRESET 0x05 /* Parallel bus reset */ +#define I2C_PCA_IMODE 0x06 /* I2C Bus mode */ + +/* PCA9665 I2C bus mode */ +#define I2C_PCA_MODE_STD 0x00 /* Standard mode */ +#define I2C_PCA_MODE_FAST 0x01 /* Fast mode */ +#define I2C_PCA_MODE_FASTP 0x02 /* Fast Plus mode */ +#define I2C_PCA_MODE_TURBO 0x03 /* Turbo mode */ + + +#define I2C_PCA_CON_AA 0x80 /* Assert Acknowledge */ +#define I2C_PCA_CON_ENSIO 0x40 /* Enable */ +#define I2C_PCA_CON_STA 0x20 /* Start */ +#define I2C_PCA_CON_STO 0x10 /* Stop */ +#define I2C_PCA_CON_SI 0x08 /* Serial Interrupt */ +#define I2C_PCA_CON_CR 0x07 /* Clock Rate (MASK) */ + +struct i2c_algo_pca_data { + void *data; /* private low level data */ + void (*write_byte) (void *data, int reg, int val); + int (*read_byte) (void *data, int reg); + int (*wait_for_completion) (void *data); + void (*reset_chip) (void *data); + /* For PCA9564, use one of the predefined frequencies: + * 330000, 288000, 217000, 146000, 88000, 59000, 44000, 36000 + * For PCA9665, use the frequency you want here. */ + unsigned int i2c_clock; +}; + +int i2c_pca_add_bus(struct i2c_adapter *); +int i2c_pca_add_numbered_bus(struct i2c_adapter *); + +#endif /* _LINUX_I2C_ALGO_PCA_H */ |