diff options
Diffstat (limited to 'drivers/usb/otg/Kconfig')
| -rw-r--r-- | drivers/usb/otg/Kconfig | 139 |
1 files changed, 139 insertions, 0 deletions
diff --git a/drivers/usb/otg/Kconfig b/drivers/usb/otg/Kconfig new file mode 100644 index 00000000..c2902a86 --- /dev/null +++ b/drivers/usb/otg/Kconfig @@ -0,0 +1,139 @@ +# +# USB OTG infrastructure may be needed for peripheral-only, host-only, +# or OTG-capable configurations when OTG transceivers or controllers +# are used. +# + +comment "OTG and related infrastructure" + +config USB_OTG_UTILS + bool + help + Select this to make sure the build includes objects from + the OTG infrastructure directory. + +config USB_OTG_WAKELOCK + bool "Hold a wakelock when USB connected" + depends on WAKELOCK + select USB_OTG_UTILS + help + Select this to automatically hold a wakelock when USB is + connected, preventing suspend. + +if USB || USB_GADGET + +# +# USB Transceiver Drivers +# +config USB_GPIO_VBUS + tristate "GPIO based peripheral-only VBUS sensing 'transceiver'" + depends on GENERIC_GPIO + select USB_OTG_UTILS + help + Provides simple GPIO VBUS sensing for controllers with an + internal transceiver via the usb_phy interface, and + optionally control of a D+ pullup GPIO as well as a VBUS + current limit regulator. + +config ISP1301_OMAP + tristate "Philips ISP1301 with OMAP OTG" + depends on I2C && ARCH_OMAP_OTG + select USB_OTG_UTILS + help + If you say yes here you get support for the Philips ISP1301 + USB-On-The-Go transceiver working with the OMAP OTG controller. + The ISP1301 is a full speed USB transceiver which is used in + products including H2, H3, and H4 development boards for Texas + Instruments OMAP processors. + + This driver can also be built as a module. If so, the module + will be called isp1301_omap. + +config USB_ULPI + bool "Generic ULPI Transceiver Driver" + depends on ARM + select USB_OTG_UTILS + help + Enable this to support ULPI connected USB OTG transceivers which + are likely found on embedded boards. + +config USB_ULPI_VIEWPORT + bool + depends on USB_ULPI + help + Provides read/write operations to the ULPI phy register set for + controllers with a viewport register (e.g. Chipidea/ARC controllers). + +config TWL4030_USB + tristate "TWL4030 USB Transceiver Driver" + depends on TWL4030_CORE && REGULATOR_TWL4030 + select USB_OTG_UTILS + help + Enable this to support the USB OTG transceiver on TWL4030 + family chips (including the TWL5030 and TPS659x0 devices). + This transceiver supports high and full speed devices plus, + in host mode, low speed. + +config TWL6030_USB + tristate "TWL6030 USB Transceiver Driver" + depends on TWL4030_CORE + select USB_OTG_UTILS + help + Enable this to support the USB OTG transceiver on TWL6030 + family chips. This TWL6030 transceiver has the VBUS and ID GND + and OTG SRP events capabilities. For all other transceiver functionality + UTMI PHY is embedded in OMAP4430. The internal PHY configurations APIs + are hooked to this driver through platform_data structure. + The definition of internal PHY APIs are in the mach-omap2 layer. + +config NOP_USB_XCEIV + tristate "NOP USB Transceiver Driver" + select USB_OTG_UTILS + help + This driver is to be used by all the usb transceiver which are either + built-in with usb ip or which are autonomous and doesn't require any + phy programming such as ISP1x04 etc. + +config USB_MSM_OTG + tristate "OTG support for Qualcomm on-chip USB controller" + depends on (USB || USB_GADGET) && ARCH_MSM + select USB_OTG_UTILS + help + Enable this to support the USB OTG transceiver on MSM chips. It + handles PHY initialization, clock management, and workarounds + required after resetting the hardware and power management. + This driver is required even for peripheral only or host only + mode configurations. + This driver is not supported on boards like trout which + has an external PHY. + +config AB8500_USB + tristate "AB8500 USB Transceiver Driver" + depends on AB8500_CORE + select USB_OTG_UTILS + help + Enable this to support the USB OTG transceiver in AB8500 chip. + This transceiver supports high and full speed devices plus, + in host mode, low speed. + +config FSL_USB2_OTG + bool "Freescale USB OTG Transceiver Driver" + depends on USB_EHCI_FSL && USB_GADGET_FSL_USB2 && USB_SUSPEND + select USB_OTG + select USB_OTG_UTILS + help + Enable this to support Freescale USB OTG transceiver. + +config USB_MV_OTG + tristate "Marvell USB OTG support" + depends on USB_EHCI_MV && USB_MV_UDC && USB_SUSPEND + select USB_OTG + select USB_OTG_UTILS + help + Say Y here if you want to build Marvell USB OTG transciever + driver in kernel (including PXA and MMP series). This driver + implements role switch between EHCI host driver and gadget driver. + + To compile this driver as a module, choose M here. + +endif # USB || OTG |