diff options
Diffstat (limited to 'drivers/usb/host/ohci-ssb.c')
| -rw-r--r-- | drivers/usb/host/ohci-ssb.c | 260 |
1 files changed, 260 insertions, 0 deletions
diff --git a/drivers/usb/host/ohci-ssb.c b/drivers/usb/host/ohci-ssb.c new file mode 100644 index 00000000..5ba18595 --- /dev/null +++ b/drivers/usb/host/ohci-ssb.c @@ -0,0 +1,260 @@ +/* + * Sonics Silicon Backplane + * Broadcom USB-core OHCI driver + * + * Copyright 2007 Michael Buesch <m@bues.ch> + * + * Derived from the OHCI-PCI driver + * Copyright 1999 Roman Weissgaerber + * Copyright 2000-2002 David Brownell + * Copyright 1999 Linus Torvalds + * Copyright 1999 Gregory P. Smith + * + * Derived from the USBcore related parts of Broadcom-SB + * Copyright 2005 Broadcom Corporation + * + * Licensed under the GNU/GPL. See COPYING for details. + */ +#include <linux/ssb/ssb.h> + + +#define SSB_OHCI_TMSLOW_HOSTMODE (1 << 29) + +struct ssb_ohci_device { + struct ohci_hcd ohci; /* _must_ be at the beginning. */ + + u32 enable_flags; +}; + +static inline +struct ssb_ohci_device *hcd_to_ssb_ohci(struct usb_hcd *hcd) +{ + return (struct ssb_ohci_device *)(hcd->hcd_priv); +} + + +static int ssb_ohci_reset(struct usb_hcd *hcd) +{ + struct ssb_ohci_device *ohcidev = hcd_to_ssb_ohci(hcd); + struct ohci_hcd *ohci = &ohcidev->ohci; + int err; + + ohci_hcd_init(ohci); + err = ohci_init(ohci); + + return err; +} + +static int ssb_ohci_start(struct usb_hcd *hcd) +{ + struct ssb_ohci_device *ohcidev = hcd_to_ssb_ohci(hcd); + struct ohci_hcd *ohci = &ohcidev->ohci; + int err; + + err = ohci_run(ohci); + if (err < 0) { + ohci_err(ohci, "can't start\n"); + ohci_stop(hcd); + } + + return err; +} + +static const struct hc_driver ssb_ohci_hc_driver = { + .description = "ssb-usb-ohci", + .product_desc = "SSB OHCI Controller", + .hcd_priv_size = sizeof(struct ssb_ohci_device), + + .irq = ohci_irq, + .flags = HCD_MEMORY | HCD_USB11, + + .reset = ssb_ohci_reset, + .start = ssb_ohci_start, + .stop = ohci_stop, + .shutdown = ohci_shutdown, + + .urb_enqueue = ohci_urb_enqueue, + .urb_dequeue = ohci_urb_dequeue, + .endpoint_disable = ohci_endpoint_disable, + + .get_frame_number = ohci_get_frame, + + .hub_status_data = ohci_hub_status_data, + .hub_control = ohci_hub_control, +#ifdef CONFIG_PM + .bus_suspend = ohci_bus_suspend, + .bus_resume = ohci_bus_resume, +#endif + + .start_port_reset = ohci_start_port_reset, +}; + +static void ssb_ohci_detach(struct ssb_device *dev) +{ + struct usb_hcd *hcd = ssb_get_drvdata(dev); + + if (hcd->driver->shutdown) + hcd->driver->shutdown(hcd); + usb_remove_hcd(hcd); + iounmap(hcd->regs); + release_mem_region(hcd->rsrc_start, hcd->rsrc_len); + usb_put_hcd(hcd); + ssb_device_disable(dev, 0); +} + +static int ssb_ohci_attach(struct ssb_device *dev) +{ + struct ssb_ohci_device *ohcidev; + struct usb_hcd *hcd; + int err = -ENOMEM; + u32 tmp, flags = 0; + + if (dma_set_mask(dev->dma_dev, DMA_BIT_MASK(32)) || + dma_set_coherent_mask(dev->dma_dev, DMA_BIT_MASK(32))) + return -EOPNOTSUPP; + + if (dev->id.coreid == SSB_DEV_USB11_HOSTDEV) { + /* Put the device into host-mode. */ + flags |= SSB_OHCI_TMSLOW_HOSTMODE; + ssb_device_enable(dev, flags); + } else if (dev->id.coreid == SSB_DEV_USB20_HOST) { + /* + * USB 2.0 special considerations: + * + * In addition to the standard SSB reset sequence, the Host + * Control Register must be programmed to bring the USB core + * and various phy components out of reset. + */ + ssb_device_enable(dev, 0); + ssb_write32(dev, 0x200, 0x7ff); + + /* Change Flush control reg */ + tmp = ssb_read32(dev, 0x400); + tmp &= ~8; + ssb_write32(dev, 0x400, tmp); + tmp = ssb_read32(dev, 0x400); + + /* Change Shim control reg */ + tmp = ssb_read32(dev, 0x304); + tmp &= ~0x100; + ssb_write32(dev, 0x304, tmp); + tmp = ssb_read32(dev, 0x304); + + udelay(1); + + /* Work around for 5354 failures */ + if (dev->id.revision == 2 && dev->bus->chip_id == 0x5354) { + /* Change syn01 reg */ + tmp = 0x00fe00fe; + ssb_write32(dev, 0x894, tmp); + + /* Change syn03 reg */ + tmp = ssb_read32(dev, 0x89c); + tmp |= 0x1; + ssb_write32(dev, 0x89c, tmp); + } + } else + ssb_device_enable(dev, 0); + + hcd = usb_create_hcd(&ssb_ohci_hc_driver, dev->dev, + dev_name(dev->dev)); + if (!hcd) + goto err_dev_disable; + ohcidev = hcd_to_ssb_ohci(hcd); + ohcidev->enable_flags = flags; + + tmp = ssb_read32(dev, SSB_ADMATCH0); + hcd->rsrc_start = ssb_admatch_base(tmp); + hcd->rsrc_len = ssb_admatch_size(tmp); + hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len); + if (!hcd->regs) + goto err_put_hcd; + err = usb_add_hcd(hcd, dev->irq, IRQF_SHARED); + if (err) + goto err_iounmap; + + ssb_set_drvdata(dev, hcd); + + return err; + +err_iounmap: + iounmap(hcd->regs); +err_put_hcd: + usb_put_hcd(hcd); +err_dev_disable: + ssb_device_disable(dev, flags); + return err; +} + +static int ssb_ohci_probe(struct ssb_device *dev, + const struct ssb_device_id *id) +{ + int err; + u16 chipid_top; + + /* USBcores are only connected on embedded devices. */ + chipid_top = (dev->bus->chip_id & 0xFF00); + if (chipid_top != 0x4700 && chipid_top != 0x5300) + return -ENODEV; + + /* TODO: Probably need checks here; is the core connected? */ + + if (usb_disabled()) + return -ENODEV; + + /* We currently always attach SSB_DEV_USB11_HOSTDEV + * as HOST OHCI. If we want to attach it as Client device, + * we must branch here and call into the (yet to + * be written) Client mode driver. Same for remove(). */ + + err = ssb_ohci_attach(dev); + + return err; +} + +static void ssb_ohci_remove(struct ssb_device *dev) +{ + ssb_ohci_detach(dev); +} + +#ifdef CONFIG_PM + +static int ssb_ohci_suspend(struct ssb_device *dev, pm_message_t state) +{ + ssb_device_disable(dev, 0); + + return 0; +} + +static int ssb_ohci_resume(struct ssb_device *dev) +{ + struct usb_hcd *hcd = ssb_get_drvdata(dev); + struct ssb_ohci_device *ohcidev = hcd_to_ssb_ohci(hcd); + + ssb_device_enable(dev, ohcidev->enable_flags); + + ohci_finish_controller_resume(hcd); + return 0; +} + +#else /* !CONFIG_PM */ +#define ssb_ohci_suspend NULL +#define ssb_ohci_resume NULL +#endif /* CONFIG_PM */ + +static const struct ssb_device_id ssb_ohci_table[] = { + SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOSTDEV, SSB_ANY_REV), + SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOST, SSB_ANY_REV), + SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB20_HOST, SSB_ANY_REV), + SSB_DEVTABLE_END +}; +MODULE_DEVICE_TABLE(ssb, ssb_ohci_table); + +static struct ssb_driver ssb_ohci_driver = { + .name = KBUILD_MODNAME, + .id_table = ssb_ohci_table, + .probe = ssb_ohci_probe, + .remove = ssb_ohci_remove, + .suspend = ssb_ohci_suspend, + .resume = ssb_ohci_resume, +}; |