1 files changed, 422 insertions, 0 deletions
diff --git a/drivers/usb/host/ohci-pci.c b/drivers/usb/host/ohci-pci.c
new file mode 100644
index 00000000..1843bb68
--- /dev/null
+++ b/drivers/usb/host/ohci-pci.c
@@ -0,0 +1,422 @@
+/*
+ * OHCI HCD (Host Controller Driver) for USB.
+ *
+ * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
+ * (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
+ *
+ * [ Initialisation is based on Linus'  ]
+ * [ uhci code and gregs ohci fragments ]
+ * [ (C) Copyright 1999 Linus Torvalds  ]
+ * [ (C) Copyright 1999 Gregory P. Smith]
+ *
+ * PCI Bus Glue
+ *
+ * This file is licenced under the GPL.
+ */
+
+#ifndef CONFIG_PCI
+#error "This file is PCI bus glue.  CONFIG_PCI must be defined."
+#endif
+
+#include <linux/pci.h>
+#include <linux/io.h>
+
+
+/*-------------------------------------------------------------------------*/
+
+static int broken_suspend(struct usb_hcd *hcd)
+{
+	device_init_wakeup(&hcd->self.root_hub->dev, 0);
+	return 0;
+}
+
+/* AMD 756, for most chips (early revs), corrupts register
+ * values on read ... so enable the vendor workaround.
+ */
+static int ohci_quirk_amd756(struct usb_hcd *hcd)
+{
+	struct ohci_hcd	*ohci = hcd_to_ohci (hcd);
+
+	ohci->flags = OHCI_QUIRK_AMD756;
+	ohci_dbg (ohci, "AMD756 erratum 4 workaround\n");
+
+	/* also erratum 10 (suspend/resume issues) */
+	return broken_suspend(hcd);
+}
+
+/* Apple's OHCI driver has a lot of bizarre workarounds
+ * for this chip.  Evidently control and bulk lists
+ * can get confused.  (B&W G3 models, and ...)
+ */
+static int ohci_quirk_opti(struct usb_hcd *hcd)
+{
+	struct ohci_hcd	*ohci = hcd_to_ohci (hcd);
+
+	ohci_dbg (ohci, "WARNING: OPTi workarounds unavailable\n");
+
+	return 0;
+}
+
+/* Check for NSC87560. We have to look at the bridge (fn1) to
+ * identify the USB (fn2). This quirk might apply to more or
+ * even all NSC stuff.
+ */
+static int ohci_quirk_ns(struct usb_hcd *hcd)
+{
+	struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
+	struct pci_dev	*b;
+
+	b  = pci_get_slot (pdev->bus, PCI_DEVFN (PCI_SLOT (pdev->devfn), 1));
+	if (b && b->device == PCI_DEVICE_ID_NS_87560_LIO
+	    && b->vendor == PCI_VENDOR_ID_NS) {
+		struct ohci_hcd	*ohci = hcd_to_ohci (hcd);
+
+		ohci->flags |= OHCI_QUIRK_SUPERIO;
+		ohci_dbg (ohci, "Using NSC SuperIO setup\n");
+	}
+	pci_dev_put(b);
+
+	return 0;
+}
+
+/* Check for Compaq's ZFMicro chipset, which needs short
+ * delays before control or bulk queues get re-activated
+ * in finish_unlinks()
+ */
+static int ohci_quirk_zfmicro(struct usb_hcd *hcd)
+{
+	struct ohci_hcd	*ohci = hcd_to_ohci (hcd);
+
+	ohci->flags |= OHCI_QUIRK_ZFMICRO;
+	ohci_dbg(ohci, "enabled Compaq ZFMicro chipset quirks\n");
+
+	return 0;
+}
+
+/* Check for Toshiba SCC OHCI which has big endian registers
+ * and little endian in memory data structures
+ */
+static int ohci_quirk_toshiba_scc(struct usb_hcd *hcd)
+{
+	struct ohci_hcd	*ohci = hcd_to_ohci (hcd);
+
+	/* That chip is only present in the southbridge of some
+	 * cell based platforms which are supposed to select
+	 * CONFIG_USB_OHCI_BIG_ENDIAN_MMIO. We verify here if
+	 * that was the case though.
+	 */
+#ifdef CONFIG_USB_OHCI_BIG_ENDIAN_MMIO
+	ohci->flags |= OHCI_QUIRK_BE_MMIO;
+	ohci_dbg (ohci, "enabled big endian Toshiba quirk\n");
+	return 0;
+#else
+	ohci_err (ohci, "unsupported big endian Toshiba quirk\n");
+	return -ENXIO;
+#endif
+}
+
+/* Check for NEC chip and apply quirk for allegedly lost interrupts.
+ */
+
+static void ohci_quirk_nec_worker(struct work_struct *work)
+{
+	struct ohci_hcd *ohci = container_of(work, struct ohci_hcd, nec_work);
+	int status;
+
+	status = ohci_init(ohci);
+	if (status != 0) {
+		ohci_err(ohci, "Restarting NEC controller failed in %s, %d\n",
+			 "ohci_init", status);
+		return;
+	}
+
+	status = ohci_restart(ohci);
+	if (status != 0)
+		ohci_err(ohci, "Restarting NEC controller failed in %s, %d\n",
+			 "ohci_restart", status);
+}
+
+static int ohci_quirk_nec(struct usb_hcd *hcd)
+{
+	struct ohci_hcd	*ohci = hcd_to_ohci (hcd);
+
+	ohci->flags |= OHCI_QUIRK_NEC;
+	INIT_WORK(&ohci->nec_work, ohci_quirk_nec_worker);
+	ohci_dbg (ohci, "enabled NEC chipset lost interrupt quirk\n");
+
+	return 0;
+}
+
+static int ohci_quirk_amd700(struct usb_hcd *hcd)
+{
+	struct ohci_hcd *ohci = hcd_to_ohci(hcd);
+	struct pci_dev *amd_smbus_dev;
+	u8 rev;
+
+	if (usb_amd_find_chipset_info())
+		ohci->flags |= OHCI_QUIRK_AMD_PLL;
+
+	amd_smbus_dev = pci_get_device(PCI_VENDOR_ID_ATI,
+			PCI_DEVICE_ID_ATI_SBX00_SMBUS, NULL);
+	if (!amd_smbus_dev)
+		return 0;
+
+	rev = amd_smbus_dev->revision;
+
+	/* SB800 needs pre-fetch fix */
+	if ((rev >= 0x40) && (rev <= 0x4f)) {
+		ohci->flags |= OHCI_QUIRK_AMD_PREFETCH;
+		ohci_dbg(ohci, "enabled AMD prefetch quirk\n");
+	}
+
+	pci_dev_put(amd_smbus_dev);
+	amd_smbus_dev = NULL;
+
+	return 0;
+}
+
+static void sb800_prefetch(struct ohci_hcd *ohci, int on)
+{
+	struct pci_dev *pdev;
+	u16 misc;
+
+	pdev = to_pci_dev(ohci_to_hcd(ohci)->self.controller);
+	pci_read_config_word(pdev, 0x50, &misc);
+	if (on == 0)
+		pci_write_config_word(pdev, 0x50, misc & 0xfcff);
+	else
+		pci_write_config_word(pdev, 0x50, misc | 0x0300);
+}
+
+/* List of quirks for OHCI */
+static const struct pci_device_id ohci_pci_quirks[] = {
+	{
+		PCI_DEVICE(PCI_VENDOR_ID_AMD, 0x740c),
+		.driver_data = (unsigned long)ohci_quirk_amd756,
+	},
+	{
+		PCI_DEVICE(PCI_VENDOR_ID_OPTI, 0xc861),
+		.driver_data = (unsigned long)ohci_quirk_opti,
+	},
+	{
+		PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_ANY_ID),
+		.driver_data = (unsigned long)ohci_quirk_ns,
+	},
+	{
+		PCI_DEVICE(PCI_VENDOR_ID_COMPAQ, 0xa0f8),
+		.driver_data = (unsigned long)ohci_quirk_zfmicro,
+	},
+	{
+		PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA_2, 0x01b6),
+		.driver_data = (unsigned long)ohci_quirk_toshiba_scc,
+	},
+	{
+		PCI_DEVICE(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_USB),
+		.driver_data = (unsigned long)ohci_quirk_nec,
+	},
+	{
+		/* Toshiba portege 4000 */
+		.vendor		= PCI_VENDOR_ID_AL,
+		.device		= 0x5237,
+		.subvendor	= PCI_VENDOR_ID_TOSHIBA,
+		.subdevice	= 0x0004,
+		.driver_data	= (unsigned long) broken_suspend,
+	},
+	{
+		PCI_DEVICE(PCI_VENDOR_ID_ITE, 0x8152),
+		.driver_data = (unsigned long) broken_suspend,
+	},
+	{
+		PCI_DEVICE(PCI_VENDOR_ID_ATI, 0x4397),
+		.driver_data = (unsigned long)ohci_quirk_amd700,
+	},
+	{
+		PCI_DEVICE(PCI_VENDOR_ID_ATI, 0x4398),
+		.driver_data = (unsigned long)ohci_quirk_amd700,
+	},
+	{
+		PCI_DEVICE(PCI_VENDOR_ID_ATI, 0x4399),
+		.driver_data = (unsigned long)ohci_quirk_amd700,
+	},
+
+	/* FIXME for some of the early AMD 760 southbridges, OHCI
+	 * won't work at all.  blacklist them.
+	 */
+
+	{},
+};
+
+static int ohci_pci_reset (struct usb_hcd *hcd)
+{
+	struct ohci_hcd	*ohci = hcd_to_ohci (hcd);
+	int ret = 0;
+
+	if (hcd->self.controller) {
+		struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
+		const struct pci_device_id *quirk_id;
+
+		quirk_id = pci_match_id(ohci_pci_quirks, pdev);
+		if (quirk_id != NULL) {
+			int (*quirk)(struct usb_hcd *ohci);
+			quirk = (void *)quirk_id->driver_data;
+			ret = quirk(hcd);
+		}
+	}
+	if (ret == 0) {
+		ohci_hcd_init (ohci);
+		return ohci_init (ohci);
+	}
+	return ret;
+}
+
+
+static int __devinit ohci_pci_start (struct usb_hcd *hcd)
+{
+	struct ohci_hcd	*ohci = hcd_to_ohci (hcd);
+	int		ret;
+
+#ifdef CONFIG_PM /* avoid warnings about unused pdev */
+	if (hcd->self.controller) {
+		struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
+
+		/* RWC may not be set for add-in PCI cards, since boot
+		 * firmware probably ignored them.  This transfers PCI
+		 * PM wakeup capabilities.
+		 */
+		if (device_can_wakeup(&pdev->dev))
+			ohci->hc_control |= OHCI_CTRL_RWC;
+	}
+#endif /* CONFIG_PM */
+
+	ret = ohci_run (ohci);
+	if (ret < 0) {
+		ohci_err (ohci, "can't start\n");
+		ohci_stop (hcd);
+	}
+	return ret;
+}
+
+#ifdef	CONFIG_PM
+
+static int ohci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup)
+{
+	struct ohci_hcd	*ohci = hcd_to_ohci (hcd);
+	unsigned long	flags;
+	int		rc = 0;
+
+	/* Root hub was already suspended. Disable irq emission and
+	 * mark HW unaccessible, bail out if RH has been resumed. Use
+	 * the spinlock to properly synchronize with possible pending
+	 * RH suspend or resume activity.
+	 */
+	spin_lock_irqsave (&ohci->lock, flags);
+	if (ohci->rh_state != OHCI_RH_SUSPENDED) {
+		rc = -EINVAL;
+		goto bail;
+	}
+	ohci_writel(ohci, OHCI_INTR_MIE, &ohci->regs->intrdisable);
+	(void)ohci_readl(ohci, &ohci->regs->intrdisable);
+
+	clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+ bail:
+	spin_unlock_irqrestore (&ohci->lock, flags);
+
+	return rc;
+}
+
+
+static int ohci_pci_resume(struct usb_hcd *hcd, bool hibernated)
+{
+	set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+
+	/* Make sure resume from hibernation re-enumerates everything */
+	if (hibernated)
+		ohci_usb_reset(hcd_to_ohci(hcd));
+
+	ohci_finish_controller_resume(hcd);
+	return 0;
+}
+
+#endif	/* CONFIG_PM */
+
+
+/*-------------------------------------------------------------------------*/
+
+static const struct hc_driver ohci_pci_hc_driver = {
+	.description =		hcd_name,
+	.product_desc =		"OHCI Host Controller",
+	.hcd_priv_size =	sizeof(struct ohci_hcd),
+
+	/*
+	 * generic hardware linkage
+	 */
+	.irq =			ohci_irq,
+	.flags =		HCD_MEMORY | HCD_USB11,
+
+	/*
+	 * basic lifecycle operations
+	 */
+	.reset =		ohci_pci_reset,
+	.start =		ohci_pci_start,
+	.stop =			ohci_stop,
+	.shutdown =		ohci_shutdown,
+
+#ifdef	CONFIG_PM
+	.pci_suspend =		ohci_pci_suspend,
+	.pci_resume =		ohci_pci_resume,
+#endif
+
+	/*
+	 * managing i/o requests and associated device resources
+	 */
+	.urb_enqueue =		ohci_urb_enqueue,
+	.urb_dequeue =		ohci_urb_dequeue,
+	.endpoint_disable =	ohci_endpoint_disable,
+
+	/*
+	 * scheduling support
+	 */
+	.get_frame_number =	ohci_get_frame,
+
+	/*
+	 * root hub support
+	 */
+	.hub_status_data =	ohci_hub_status_data,
+	.hub_control =		ohci_hub_control,
+#ifdef	CONFIG_PM
+	.bus_suspend =		ohci_bus_suspend,
+	.bus_resume =		ohci_bus_resume,
+#endif
+	.start_port_reset =	ohci_start_port_reset,
+};
+
+/*-------------------------------------------------------------------------*/
+
+
+static const struct pci_device_id pci_ids [] = { {
+	/* handle any USB OHCI controller */
+	PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_USB_OHCI, ~0),
+	.driver_data =	(unsigned long) &ohci_pci_hc_driver,
+	}, {
+	/* The device in the ConneXT I/O hub has no class reg */
+	PCI_VDEVICE(STMICRO, PCI_DEVICE_ID_STMICRO_USB_OHCI),
+	.driver_data =	(unsigned long) &ohci_pci_hc_driver,
+	}, { /* end: all zeroes */ }
+};
+MODULE_DEVICE_TABLE (pci, pci_ids);
+
+/* pci driver glue; this is a "new style" PCI driver module */
+static struct pci_driver ohci_pci_driver = {
+	.name =		(char *) hcd_name,
+	.id_table =	pci_ids,
+
+	.probe =	usb_hcd_pci_probe,
+	.remove =	usb_hcd_pci_remove,
+	.shutdown =	usb_hcd_pci_shutdown,
+
+#ifdef CONFIG_PM_SLEEP
+	.driver =	{
+		.pm =	&usb_hcd_pci_pm_ops
+	},
+#endif
+};