diff options
Diffstat (limited to 'drivers/net/wireless/rtl8188C_8192C/hal/rtl8192c/rtl8192c_phycfg.c')
| -rwxr-xr-x | drivers/net/wireless/rtl8188C_8192C/hal/rtl8192c/rtl8192c_phycfg.c | 4841 |
1 files changed, 4841 insertions, 0 deletions
diff --git a/drivers/net/wireless/rtl8188C_8192C/hal/rtl8192c/rtl8192c_phycfg.c b/drivers/net/wireless/rtl8188C_8192C/hal/rtl8192c/rtl8192c_phycfg.c new file mode 100755 index 00000000..b86ac8ad --- /dev/null +++ b/drivers/net/wireless/rtl8188C_8192C/hal/rtl8192c/rtl8192c_phycfg.c @@ -0,0 +1,4841 @@ +/****************************************************************************** + * + * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA + * + * + ******************************************************************************/ +/****************************************************************************** + + Module: rtl8192c_phycfg.c + + Note: Merge 92SE/SU PHY config as below + 1. BB register R/W API + 2. RF register R/W API + 3. Initial BB/RF/MAC config by reading BB/MAC/RF txt. + 3. Power setting API + 4. Channel switch API + 5. Initial gain switch API. + 6. Other BB/MAC/RF API. + + Function: PHY: Extern function, phy: local function + + Export: PHY_FunctionName + + Abbrev: NONE + + History: + Data Who Remark + 08/08/2008 MHC 1. Port from 9x series phycfg.c + 2. Reorganize code arch and ad description. + 3. Collect similar function. + 4. Seperate extern/local API. + 08/12/2008 MHC We must merge or move USB PHY relative function later. + 10/07/2008 MHC Add IQ calibration for PHY.(Only 1T2R mode now!!!) + 11/06/2008 MHC Add TX Power index PG file to config in 0xExx register + area to map with EEPROM/EFUSE tx pwr index. + +******************************************************************************/ +#define _HAL_8192C_PHYCFG_C_ + +#include <drv_conf.h> +#include <osdep_service.h> +#include <drv_types.h> +#include <rtw_byteorder.h> + +#ifdef CONFIG_IOL +#include <rtw_iol.h> +#endif + +#include <rtl8192c_hal.h> + + +/*---------------------------Define Local Constant---------------------------*/ +/* Channel switch:The size of command tables for switch channel*/ +#define MAX_PRECMD_CNT 16 +#define MAX_RFDEPENDCMD_CNT 16 +#define MAX_POSTCMD_CNT 16 + +#define MAX_DOZE_WAITING_TIMES_9x 64 + +/*---------------------------Define Local Constant---------------------------*/ + + +/*------------------------Define global variable-----------------------------*/ + +/*------------------------Define local variable------------------------------*/ + + +/*--------------------Define export function prototype-----------------------*/ +// Please refer to header file +/*--------------------Define export function prototype-----------------------*/ + +/*----------------------------Function Body----------------------------------*/ +// +// 1. BB register R/W API +// + +/** +* Function: phy_CalculateBitShift +* +* OverView: Get shifted position of the BitMask +* +* Input: +* u4Byte BitMask, +* +* Output: none +* Return: u4Byte Return the shift bit bit position of the mask +*/ +static u32 +phy_CalculateBitShift( + u32 BitMask + ) +{ + u32 i; + + for(i=0; i<=31; i++) + { + if ( ((BitMask>>i) & 0x1 ) == 1) + break; + } + + return (i); +} + + +/** +* Function: PHY_QueryBBReg +* +* OverView: Read "sepcific bits" from BB register +* +* Input: +* PADAPTER Adapter, +* u4Byte RegAddr, //The target address to be readback +* u4Byte BitMask //The target bit position in the target address +* //to be readback +* Output: None +* Return: u4Byte Data //The readback register value +* Note: This function is equal to "GetRegSetting" in PHY programming guide +*/ +u32 +rtl8192c_PHY_QueryBBReg( + IN PADAPTER Adapter, + IN u32 RegAddr, + IN u32 BitMask + ) +{ + u32 ReturnValue = 0, OriginalValue, BitShift; + u16 BBWaitCounter = 0; + +#if (DISABLE_BB_RF == 1) + return 0; +#endif + + //RT_TRACE(COMP_RF, DBG_TRACE, ("--->PHY_QueryBBReg(): RegAddr(%#lx), BitMask(%#lx)\n", RegAddr, BitMask)); + + OriginalValue = rtw_read32(Adapter, RegAddr); + BitShift = phy_CalculateBitShift(BitMask); + ReturnValue = (OriginalValue & BitMask) >> BitShift; + + //RTPRINT(FPHY, PHY_BBR, ("BBR MASK=0x%lx Addr[0x%lx]=0x%lx\n", BitMask, RegAddr, OriginalValue)); + //RT_TRACE(COMP_RF, DBG_TRACE, ("<---PHY_QueryBBReg(): RegAddr(%#lx), BitMask(%#lx), OriginalValue(%#lx)\n", RegAddr, BitMask, OriginalValue)); + + return (ReturnValue); + +} + + +/** +* Function: PHY_SetBBReg +* +* OverView: Write "Specific bits" to BB register (page 8~) +* +* Input: +* PADAPTER Adapter, +* u4Byte RegAddr, //The target address to be modified +* u4Byte BitMask //The target bit position in the target address +* //to be modified +* u4Byte Data //The new register value in the target bit position +* //of the target address +* +* Output: None +* Return: None +* Note: This function is equal to "PutRegSetting" in PHY programming guide +*/ + +VOID +rtl8192c_PHY_SetBBReg( + IN PADAPTER Adapter, + IN u32 RegAddr, + IN u32 BitMask, + IN u32 Data + ) +{ + HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); + //u16 BBWaitCounter = 0; + u32 OriginalValue, BitShift; + +#if (DISABLE_BB_RF == 1) + return; +#endif + + //RT_TRACE(COMP_RF, DBG_TRACE, ("--->PHY_SetBBReg(): RegAddr(%#lx), BitMask(%#lx), Data(%#lx)\n", RegAddr, BitMask, Data)); + + if(BitMask!= bMaskDWord){//if not "double word" write + OriginalValue = rtw_read32(Adapter, RegAddr); + BitShift = phy_CalculateBitShift(BitMask); + Data = ((OriginalValue & (~BitMask)) | (Data << BitShift)); + } + + rtw_write32(Adapter, RegAddr, Data); + + //RTPRINT(FPHY, PHY_BBW, ("BBW MASK=0x%lx Addr[0x%lx]=0x%lx\n", BitMask, RegAddr, Data)); + //RT_TRACE(COMP_RF, DBG_TRACE, ("<---PHY_SetBBReg(): RegAddr(%#lx), BitMask(%#lx), Data(%#lx)\n", RegAddr, BitMask, Data)); + +} + + +// +// 2. RF register R/W API +// + +/*----------------------------------------------------------------------------- + * Function: phy_FwRFSerialRead() + * + * Overview: We support firmware to execute RF-R/W. + * + * Input: NONE + * + * Output: NONE + * + * Return: NONE + * + * Revised History: + * When Who Remark + * 01/21/2008 MHC Create Version 0. + * + *---------------------------------------------------------------------------*/ +static u32 +phy_FwRFSerialRead( + IN PADAPTER Adapter, + IN RF_RADIO_PATH_E eRFPath, + IN u32 Offset ) +{ + u32 retValue = 0; + //RT_ASSERT(FALSE,("deprecate!\n")); + return (retValue); + +} /* phy_FwRFSerialRead */ + + +/*----------------------------------------------------------------------------- + * Function: phy_FwRFSerialWrite() + * + * Overview: We support firmware to execute RF-R/W. + * + * Input: NONE + * + * Output: NONE + * + * Return: NONE + * + * Revised History: + * When Who Remark + * 01/21/2008 MHC Create Version 0. + * + *---------------------------------------------------------------------------*/ +static VOID +phy_FwRFSerialWrite( + IN PADAPTER Adapter, + IN RF_RADIO_PATH_E eRFPath, + IN u32 Offset, + IN u32 Data ) +{ + //RT_ASSERT(FALSE,("deprecate!\n")); +} + + +/** +* Function: phy_RFSerialRead +* +* OverView: Read regster from RF chips +* +* Input: +* PADAPTER Adapter, +* RF_RADIO_PATH_E eRFPath, //Radio path of A/B/C/D +* u4Byte Offset, //The target address to be read +* +* Output: None +* Return: u4Byte reback value +* Note: Threre are three types of serial operations: +* 1. Software serial write +* 2. Hardware LSSI-Low Speed Serial Interface +* 3. Hardware HSSI-High speed +* serial write. Driver need to implement (1) and (2). +* This function is equal to the combination of RF_ReadReg() and RFLSSIRead() +*/ +static u32 +phy_RFSerialRead( + IN PADAPTER Adapter, + IN RF_RADIO_PATH_E eRFPath, + IN u32 Offset + ) +{ + u32 retValue = 0; + HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); + BB_REGISTER_DEFINITION_T *pPhyReg = &pHalData->PHYRegDef[eRFPath]; + u32 NewOffset; + u32 tmplong,tmplong2; + u8 RfPiEnable=0; +#if 0 + if(pHalData->RFChipID == RF_8225 && Offset > 0x24) //36 valid regs + return retValue; + if(pHalData->RFChipID == RF_8256 && Offset > 0x2D) //45 valid regs + return retValue; +#endif + // + // Make sure RF register offset is correct + // + Offset &= 0x3f; + + // + // Switch page for 8256 RF IC + // + NewOffset = Offset; + + // 2009/06/17 MH We can not execute IO for power save or other accident mode. + //if(RT_CANNOT_IO(Adapter)) + //{ + // RTPRINT(FPHY, PHY_RFR, ("phy_RFSerialRead return all one\n")); + // return 0xFFFFFFFF; + //} + + // For 92S LSSI Read RFLSSIRead + // For RF A/B write 0x824/82c(does not work in the future) + // We must use 0x824 for RF A and B to execute read trigger + tmplong = PHY_QueryBBReg(Adapter, rFPGA0_XA_HSSIParameter2, bMaskDWord); + if(eRFPath == RF_PATH_A) + tmplong2 = tmplong; + else + tmplong2 = PHY_QueryBBReg(Adapter, pPhyReg->rfHSSIPara2, bMaskDWord); + + tmplong2 = (tmplong2 & (~bLSSIReadAddress)) | (NewOffset<<23) | bLSSIReadEdge; //T65 RF + + PHY_SetBBReg(Adapter, rFPGA0_XA_HSSIParameter2, bMaskDWord, tmplong&(~bLSSIReadEdge)); + rtw_udelay_os(10);// PlatformStallExecution(10); + + PHY_SetBBReg(Adapter, pPhyReg->rfHSSIPara2, bMaskDWord, tmplong2); + rtw_udelay_os(100);//PlatformStallExecution(100); + + PHY_SetBBReg(Adapter, rFPGA0_XA_HSSIParameter2, bMaskDWord, tmplong|bLSSIReadEdge); + rtw_udelay_os(10);//PlatformStallExecution(10); + + if(eRFPath == RF_PATH_A) + RfPiEnable = (u8)PHY_QueryBBReg(Adapter, rFPGA0_XA_HSSIParameter1, BIT8); + else if(eRFPath == RF_PATH_B) + RfPiEnable = (u8)PHY_QueryBBReg(Adapter, rFPGA0_XB_HSSIParameter1, BIT8); + + if(RfPiEnable) + { // Read from BBreg8b8, 12 bits for 8190, 20bits for T65 RF + retValue = PHY_QueryBBReg(Adapter, pPhyReg->rfLSSIReadBackPi, bLSSIReadBackData); + //DBG_8192C("Readback from RF-PI : 0x%x\n", retValue); + } + else + { //Read from BBreg8a0, 12 bits for 8190, 20 bits for T65 RF + retValue = PHY_QueryBBReg(Adapter, pPhyReg->rfLSSIReadBack, bLSSIReadBackData); + //DBG_8192C("Readback from RF-SI : 0x%x\n", retValue); + } + //DBG_8192C("RFR-%d Addr[0x%x]=0x%x\n", eRFPath, pPhyReg->rfLSSIReadBack, retValue); + + return retValue; + +} + + + +/** +* Function: phy_RFSerialWrite +* +* OverView: Write data to RF register (page 8~) +* +* Input: +* PADAPTER Adapter, +* RF_RADIO_PATH_E eRFPath, //Radio path of A/B/C/D +* u4Byte Offset, //The target address to be read +* u4Byte Data //The new register Data in the target bit position +* //of the target to be read +* +* Output: None +* Return: None +* Note: Threre are three types of serial operations: +* 1. Software serial write +* 2. Hardware LSSI-Low Speed Serial Interface +* 3. Hardware HSSI-High speed +* serial write. Driver need to implement (1) and (2). +* This function is equal to the combination of RF_ReadReg() and RFLSSIRead() + * + * Note: For RF8256 only + * The total count of RTL8256(Zebra4) register is around 36 bit it only employs + * 4-bit RF address. RTL8256 uses "register mode control bit" (Reg00[12], Reg00[10]) + * to access register address bigger than 0xf. See "Appendix-4 in PHY Configuration + * programming guide" for more details. + * Thus, we define a sub-finction for RTL8526 register address conversion + * =========================================================== + * Register Mode RegCTL[1] RegCTL[0] Note + * (Reg00[12]) (Reg00[10]) + * =========================================================== + * Reg_Mode0 0 x Reg 0 ~15(0x0 ~ 0xf) + * ------------------------------------------------------------------ + * Reg_Mode1 1 0 Reg 16 ~30(0x1 ~ 0xf) + * ------------------------------------------------------------------ + * Reg_Mode2 1 1 Reg 31 ~ 45(0x1 ~ 0xf) + * ------------------------------------------------------------------ + * + * 2008/09/02 MH Add 92S RF definition + * + * + * +*/ +static VOID +phy_RFSerialWrite( + IN PADAPTER Adapter, + IN RF_RADIO_PATH_E eRFPath, + IN u32 Offset, + IN u32 Data + ) +{ + u32 DataAndAddr = 0; + HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); + BB_REGISTER_DEFINITION_T *pPhyReg = &pHalData->PHYRegDef[eRFPath]; + u32 NewOffset; + +#if 0 + //<Roger_TODO> We should check valid regs for RF_6052 case. + if(pHalData->RFChipID == RF_8225 && Offset > 0x24) //36 valid regs + return; + if(pHalData->RFChipID == RF_8256 && Offset > 0x2D) //45 valid regs + return; +#endif + + // 2009/06/17 MH We can not execute IO for power save or other accident mode. + //if(RT_CANNOT_IO(Adapter)) + //{ + // RTPRINT(FPHY, PHY_RFW, ("phy_RFSerialWrite stop\n")); + // return; + //} + + Offset &= 0x3f; + + // + // Shadow Update + // + //PHY_RFShadowWrite(Adapter, eRFPath, Offset, Data); + + // + // Switch page for 8256 RF IC + // + NewOffset = Offset; + + // + // Put write addr in [5:0] and write data in [31:16] + // + //DataAndAddr = (Data<<16) | (NewOffset&0x3f); + DataAndAddr = ((NewOffset<<20) | (Data&0x000fffff)) & 0x0fffffff; // T65 RF + + // + // Write Operation + // + PHY_SetBBReg(Adapter, pPhyReg->rf3wireOffset, bMaskDWord, DataAndAddr); + //RTPRINT(FPHY, PHY_RFW, ("RFW-%d Addr[0x%lx]=0x%lx\n", eRFPath, pPhyReg->rf3wireOffset, DataAndAddr)); + +} + + +/** +* Function: PHY_QueryRFReg +* +* OverView: Query "Specific bits" to RF register (page 8~) +* +* Input: +* PADAPTER Adapter, +* RF_RADIO_PATH_E eRFPath, //Radio path of A/B/C/D +* u4Byte RegAddr, //The target address to be read +* u4Byte BitMask //The target bit position in the target address +* //to be read +* +* Output: None +* Return: u4Byte Readback value +* Note: This function is equal to "GetRFRegSetting" in PHY programming guide +*/ +u32 +rtl8192c_PHY_QueryRFReg( + IN PADAPTER Adapter, + IN RF_RADIO_PATH_E eRFPath, + IN u32 RegAddr, + IN u32 BitMask + ) +{ + u32 Original_Value, Readback_Value, BitShift; + //HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); + //u8 RFWaitCounter = 0; + //_irqL irqL; + +#if (DISABLE_BB_RF == 1) + return 0; +#endif + + //RT_TRACE(COMP_RF, DBG_TRACE, ("--->PHY_QueryRFReg(): RegAddr(%#lx), eRFPath(%#x), BitMask(%#lx)\n", RegAddr, eRFPath,BitMask)); + +#ifdef CONFIG_USB_HCI + //PlatformAcquireMutex(&pHalData->mxRFOperate); +#else + //_enter_critical(&pHalData->rf_lock, &irqL); +#endif + + + Original_Value = phy_RFSerialRead(Adapter, eRFPath, RegAddr); + + BitShift = phy_CalculateBitShift(BitMask); + Readback_Value = (Original_Value & BitMask) >> BitShift; + +#ifdef CONFIG_USB_HCI + //PlatformReleaseMutex(&pHalData->mxRFOperate); +#else + //_exit_critical(&pHalData->rf_lock, &irqL); +#endif + + + //RTPRINT(FPHY, PHY_RFR, ("RFR-%d MASK=0x%lx Addr[0x%lx]=0x%lx\n", eRFPath, BitMask, RegAddr, Original_Value));//BitMask(%#lx),BitMask, + //RT_TRACE(COMP_RF, DBG_TRACE, ("<---PHY_QueryRFReg(): RegAddr(%#lx), eRFPath(%#x), Original_Value(%#lx)\n", + // RegAddr, eRFPath, Original_Value)); + + return (Readback_Value); +} + +/** +* Function: PHY_SetRFReg +* +* OverView: Write "Specific bits" to RF register (page 8~) +* +* Input: +* PADAPTER Adapter, +* RF_RADIO_PATH_E eRFPath, //Radio path of A/B/C/D +* u4Byte RegAddr, //The target address to be modified +* u4Byte BitMask //The target bit position in the target address +* //to be modified +* u4Byte Data //The new register Data in the target bit position +* //of the target address +* +* Output: None +* Return: None +* Note: This function is equal to "PutRFRegSetting" in PHY programming guide +*/ +VOID +rtl8192c_PHY_SetRFReg( + IN PADAPTER Adapter, + IN RF_RADIO_PATH_E eRFPath, + IN u32 RegAddr, + IN u32 BitMask, + IN u32 Data + ) +{ + + //HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); + //u1Byte RFWaitCounter = 0; + u32 Original_Value, BitShift; + //_irqL irqL; + +#if (DISABLE_BB_RF == 1) + return; +#endif + + //RT_TRACE(COMP_RF, DBG_TRACE, ("--->PHY_SetRFReg(): RegAddr(%#lx), BitMask(%#lx), Data(%#lx), eRFPath(%#x)\n", + // RegAddr, BitMask, Data, eRFPath)); + //RTPRINT(FINIT, INIT_RF, ("PHY_SetRFReg(): RegAddr(%#lx), BitMask(%#lx), Data(%#lx), eRFPath(%#x)\n", + // RegAddr, BitMask, Data, eRFPath)); + + +#ifdef CONFIG_USB_HCI + //PlatformAcquireMutex(&pHalData->mxRFOperate); +#else + //_enter_critical(&pHalData->rf_lock, &irqL); +#endif + + + // RF data is 12 bits only + if (BitMask != bRFRegOffsetMask) + { + Original_Value = phy_RFSerialRead(Adapter, eRFPath, RegAddr); + BitShift = phy_CalculateBitShift(BitMask); + Data = ((Original_Value & (~BitMask)) | (Data<< BitShift)); + } + + phy_RFSerialWrite(Adapter, eRFPath, RegAddr, Data); + + + +#ifdef CONFIG_USB_HCI + //PlatformReleaseMutex(&pHalData->mxRFOperate); +#else + //_exit_critical(&pHalData->rf_lock, &irqL); +#endif + + //PHY_QueryRFReg(Adapter,eRFPath,RegAddr,BitMask); + //RT_TRACE(COMP_RF, DBG_TRACE, ("<---PHY_SetRFReg(): RegAddr(%#lx), BitMask(%#lx), Data(%#lx), eRFPath(%#x)\n", + // RegAddr, BitMask, Data, eRFPath)); + +} + + +// +// 3. Initial MAC/BB/RF config by reading MAC/BB/RF txt. +// + +/*----------------------------------------------------------------------------- + * Function: phy_ConfigMACWithParaFile() + * + * Overview: This function read BB parameters from general file format, and do register + * Read/Write + * + * Input: PADAPTER Adapter + * ps1Byte pFileName + * + * Output: NONE + * + * Return: RT_STATUS_SUCCESS: configuration file exist + * + * Note: The format of MACPHY_REG.txt is different from PHY and RF. + * [Register][Mask][Value] + *---------------------------------------------------------------------------*/ +static int +phy_ConfigMACWithParaFile( + IN PADAPTER Adapter, + IN u8* pFileName +) +{ + HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); + + int rtStatus = _SUCCESS; + + return rtStatus; +} + +/*----------------------------------------------------------------------------- + * Function: phy_ConfigMACWithHeaderFile() + * + * Overview: This function read BB parameters from Header file we gen, and do register + * Read/Write + * + * Input: PADAPTER Adapter + * ps1Byte pFileName + * + * Output: NONE + * + * Return: RT_STATUS_SUCCESS: configuration file exist + * + * Note: The format of MACPHY_REG.txt is different from PHY and RF. + * [Register][Mask][Value] + *---------------------------------------------------------------------------*/ +static int +phy_ConfigMACWithHeaderFile( + IN PADAPTER Adapter +) +{ + u32 i = 0; + u32 ArrayLength = 0; + u32* ptrArray; + //HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); + + //2008.11.06 Modified by tynli. + //RT_TRACE(COMP_INIT, DBG_LOUD, ("Read Rtl819XMACPHY_Array\n")); + ArrayLength = MAC_2T_ArrayLength; + ptrArray = Rtl819XMAC_Array; + +#ifdef CONFIG_IOL_MAC + if(rtw_IOL_applied(Adapter)) + { + struct xmit_frame *xmit_frame; + if((xmit_frame=rtw_IOL_accquire_xmit_frame(Adapter)) == NULL) + return _FAIL; + + for(i = 0 ;i < ArrayLength;i=i+2){ // Add by tynli for 2 column + rtw_IOL_append_WB_cmd(xmit_frame, ptrArray[i], (u8)ptrArray[i+1]); + } + + return rtw_IOL_exec_cmds_sync(Adapter, xmit_frame, 1000); + } + else +#endif + { + for(i = 0 ;i < ArrayLength;i=i+2){ // Add by tynli for 2 column + rtw_write8(Adapter, ptrArray[i], (u8)ptrArray[i+1]); + } + } + + return _SUCCESS; + +} + + +/*----------------------------------------------------------------------------- + * Function: PHY_MACConfig8192C + * + * Overview: Condig MAC by header file or parameter file. + * + * Input: NONE + * + * Output: NONE + * + * Return: NONE + * + * Revised History: + * When Who Remark + * 08/12/2008 MHC Create Version 0. + * + *---------------------------------------------------------------------------*/ +int +PHY_MACConfig8192C( + IN PADAPTER Adapter + ) +{ + int rtStatus = _SUCCESS; + HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); + s8 *pszMACRegFile; + s8 sz88CMACRegFile[] = RTL8188C_PHY_MACREG; + s8 sz92CMACRegFile[] = RTL8192C_PHY_MACREG; + BOOLEAN is92C = IS_92C_SERIAL(pHalData->VersionID); + + if(is92C) + pszMACRegFile = sz92CMACRegFile; + else + pszMACRegFile = sz88CMACRegFile; + + // + // Config MAC + // +#ifdef CONFIG_EMBEDDED_FWIMG + rtStatus = phy_ConfigMACWithHeaderFile(Adapter); +#else + + // Not make sure EEPROM, add later + //RT_TRACE(COMP_INIT, DBG_LOUD, ("Read MACREG.txt\n")); + rtStatus = phy_ConfigMACWithParaFile(Adapter, pszMACRegFile); +#endif + +#ifdef CONFIG_PCI_HCI + //this switching setting cause some 8192cu hw have redownload fw fail issue + //improve 2-stream TX EVM by Jenyu + if(is92C) + rtw_write8(Adapter, REG_SPS0_CTRL+3,0x71); +#endif + + + // 2010.07.13 AMPDU aggregation number 9 + //rtw_write16(Adapter, REG_MAX_AGGR_NUM, MAX_AGGR_NUM); + rtw_write8(Adapter, REG_MAX_AGGR_NUM, 0x0A); //By tynli. 2010.11.18. +#ifdef CONFIG_USB_HCI + if(is92C && (BOARD_USB_DONGLE == pHalData->BoardType)) + rtw_write8(Adapter, 0x40,0x04); +#endif + + return rtStatus; + +} + + +/** +* Function: phy_InitBBRFRegisterDefinition +* +* OverView: Initialize Register definition offset for Radio Path A/B/C/D +* +* Input: +* PADAPTER Adapter, +* +* Output: None +* Return: None +* Note: The initialization value is constant and it should never be changes +*/ +static VOID +phy_InitBBRFRegisterDefinition( + IN PADAPTER Adapter +) +{ + HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); + + // RF Interface Sowrtware Control + pHalData->PHYRegDef[RF_PATH_A].rfintfs = rFPGA0_XAB_RFInterfaceSW; // 16 LSBs if read 32-bit from 0x870 + pHalData->PHYRegDef[RF_PATH_B].rfintfs = rFPGA0_XAB_RFInterfaceSW; // 16 MSBs if read 32-bit from 0x870 (16-bit for 0x872) + pHalData->PHYRegDef[RF_PATH_C].rfintfs = rFPGA0_XCD_RFInterfaceSW;// 16 LSBs if read 32-bit from 0x874 + pHalData->PHYRegDef[RF_PATH_D].rfintfs = rFPGA0_XCD_RFInterfaceSW;// 16 MSBs if read 32-bit from 0x874 (16-bit for 0x876) + + // RF Interface Readback Value + pHalData->PHYRegDef[RF_PATH_A].rfintfi = rFPGA0_XAB_RFInterfaceRB; // 16 LSBs if read 32-bit from 0x8E0 + pHalData->PHYRegDef[RF_PATH_B].rfintfi = rFPGA0_XAB_RFInterfaceRB;// 16 MSBs if read 32-bit from 0x8E0 (16-bit for 0x8E2) + pHalData->PHYRegDef[RF_PATH_C].rfintfi = rFPGA0_XCD_RFInterfaceRB;// 16 LSBs if read 32-bit from 0x8E4 + pHalData->PHYRegDef[RF_PATH_D].rfintfi = rFPGA0_XCD_RFInterfaceRB;// 16 MSBs if read 32-bit from 0x8E4 (16-bit for 0x8E6) + + // RF Interface Output (and Enable) + pHalData->PHYRegDef[RF_PATH_A].rfintfo = rFPGA0_XA_RFInterfaceOE; // 16 LSBs if read 32-bit from 0x860 + pHalData->PHYRegDef[RF_PATH_B].rfintfo = rFPGA0_XB_RFInterfaceOE; // 16 LSBs if read 32-bit from 0x864 + + // RF Interface (Output and) Enable + pHalData->PHYRegDef[RF_PATH_A].rfintfe = rFPGA0_XA_RFInterfaceOE; // 16 MSBs if read 32-bit from 0x860 (16-bit for 0x862) + pHalData->PHYRegDef[RF_PATH_B].rfintfe = rFPGA0_XB_RFInterfaceOE; // 16 MSBs if read 32-bit from 0x864 (16-bit for 0x866) + + //Addr of LSSI. Wirte RF register by driver + pHalData->PHYRegDef[RF_PATH_A].rf3wireOffset = rFPGA0_XA_LSSIParameter; //LSSI Parameter + pHalData->PHYRegDef[RF_PATH_B].rf3wireOffset = rFPGA0_XB_LSSIParameter; + + // RF parameter + pHalData->PHYRegDef[RF_PATH_A].rfLSSI_Select = rFPGA0_XAB_RFParameter; //BB Band Select + pHalData->PHYRegDef[RF_PATH_B].rfLSSI_Select = rFPGA0_XAB_RFParameter; + pHalData->PHYRegDef[RF_PATH_C].rfLSSI_Select = rFPGA0_XCD_RFParameter; + pHalData->PHYRegDef[RF_PATH_D].rfLSSI_Select = rFPGA0_XCD_RFParameter; + + // Tx AGC Gain Stage (same for all path. Should we remove this?) + pHalData->PHYRegDef[RF_PATH_A].rfTxGainStage = rFPGA0_TxGainStage; //Tx gain stage + pHalData->PHYRegDef[RF_PATH_B].rfTxGainStage = rFPGA0_TxGainStage; //Tx gain stage + pHalData->PHYRegDef[RF_PATH_C].rfTxGainStage = rFPGA0_TxGainStage; //Tx gain stage + pHalData->PHYRegDef[RF_PATH_D].rfTxGainStage = rFPGA0_TxGainStage; //Tx gain stage + + // Tranceiver A~D HSSI Parameter-1 + pHalData->PHYRegDef[RF_PATH_A].rfHSSIPara1 = rFPGA0_XA_HSSIParameter1; //wire control parameter1 + pHalData->PHYRegDef[RF_PATH_B].rfHSSIPara1 = rFPGA0_XB_HSSIParameter1; //wire control parameter1 + + // Tranceiver A~D HSSI Parameter-2 + pHalData->PHYRegDef[RF_PATH_A].rfHSSIPara2 = rFPGA0_XA_HSSIParameter2; //wire control parameter2 + pHalData->PHYRegDef[RF_PATH_B].rfHSSIPara2 = rFPGA0_XB_HSSIParameter2; //wire control parameter2 + + // RF switch Control + pHalData->PHYRegDef[RF_PATH_A].rfSwitchControl = rFPGA0_XAB_SwitchControl; //TR/Ant switch control + pHalData->PHYRegDef[RF_PATH_B].rfSwitchControl = rFPGA0_XAB_SwitchControl; + pHalData->PHYRegDef[RF_PATH_C].rfSwitchControl = rFPGA0_XCD_SwitchControl; + pHalData->PHYRegDef[RF_PATH_D].rfSwitchControl = rFPGA0_XCD_SwitchControl; + + // AGC control 1 + pHalData->PHYRegDef[RF_PATH_A].rfAGCControl1 = rOFDM0_XAAGCCore1; + pHalData->PHYRegDef[RF_PATH_B].rfAGCControl1 = rOFDM0_XBAGCCore1; + pHalData->PHYRegDef[RF_PATH_C].rfAGCControl1 = rOFDM0_XCAGCCore1; + pHalData->PHYRegDef[RF_PATH_D].rfAGCControl1 = rOFDM0_XDAGCCore1; + + // AGC control 2 + pHalData->PHYRegDef[RF_PATH_A].rfAGCControl2 = rOFDM0_XAAGCCore2; + pHalData->PHYRegDef[RF_PATH_B].rfAGCControl2 = rOFDM0_XBAGCCore2; + pHalData->PHYRegDef[RF_PATH_C].rfAGCControl2 = rOFDM0_XCAGCCore2; + pHalData->PHYRegDef[RF_PATH_D].rfAGCControl2 = rOFDM0_XDAGCCore2; + + // RX AFE control 1 + pHalData->PHYRegDef[RF_PATH_A].rfRxIQImbalance = rOFDM0_XARxIQImbalance; + pHalData->PHYRegDef[RF_PATH_B].rfRxIQImbalance = rOFDM0_XBRxIQImbalance; + pHalData->PHYRegDef[RF_PATH_C].rfRxIQImbalance = rOFDM0_XCRxIQImbalance; + pHalData->PHYRegDef[RF_PATH_D].rfRxIQImbalance = rOFDM0_XDRxIQImbalance; + + // RX AFE control 1 + pHalData->PHYRegDef[RF_PATH_A].rfRxAFE = rOFDM0_XARxAFE; + pHalData->PHYRegDef[RF_PATH_B].rfRxAFE = rOFDM0_XBRxAFE; + pHalData->PHYRegDef[RF_PATH_C].rfRxAFE = rOFDM0_XCRxAFE; + pHalData->PHYRegDef[RF_PATH_D].rfRxAFE = rOFDM0_XDRxAFE; + + // Tx AFE control 1 + pHalData->PHYRegDef[RF_PATH_A].rfTxIQImbalance = rOFDM0_XATxIQImbalance; + pHalData->PHYRegDef[RF_PATH_B].rfTxIQImbalance = rOFDM0_XBTxIQImbalance; + pHalData->PHYRegDef[RF_PATH_C].rfTxIQImbalance = rOFDM0_XCTxIQImbalance; + pHalData->PHYRegDef[RF_PATH_D].rfTxIQImbalance = rOFDM0_XDTxIQImbalance; + + // Tx AFE control 2 + pHalData->PHYRegDef[RF_PATH_A].rfTxAFE = rOFDM0_XATxAFE; + pHalData->PHYRegDef[RF_PATH_B].rfTxAFE = rOFDM0_XBTxAFE; + pHalData->PHYRegDef[RF_PATH_C].rfTxAFE = rOFDM0_XCTxAFE; + pHalData->PHYRegDef[RF_PATH_D].rfTxAFE = rOFDM0_XDTxAFE; + + // Tranceiver LSSI Readback SI mode + pHalData->PHYRegDef[RF_PATH_A].rfLSSIReadBack = rFPGA0_XA_LSSIReadBack; + pHalData->PHYRegDef[RF_PATH_B].rfLSSIReadBack = rFPGA0_XB_LSSIReadBack; + pHalData->PHYRegDef[RF_PATH_C].rfLSSIReadBack = rFPGA0_XC_LSSIReadBack; + pHalData->PHYRegDef[RF_PATH_D].rfLSSIReadBack = rFPGA0_XD_LSSIReadBack; + + // Tranceiver LSSI Readback PI mode + pHalData->PHYRegDef[RF_PATH_A].rfLSSIReadBackPi = TransceiverA_HSPI_Readback; + pHalData->PHYRegDef[RF_PATH_B].rfLSSIReadBackPi = TransceiverB_HSPI_Readback; + //pHalData->PHYRegDef[RF_PATH_C].rfLSSIReadBackPi = rFPGA0_XC_LSSIReadBack; + //pHalData->PHYRegDef[RF_PATH_D].rfLSSIReadBackPi = rFPGA0_XD_LSSIReadBack; + +} + + +/*----------------------------------------------------------------------------- + * Function: phy_ConfigBBWithParaFile() + * + * Overview: This function read BB parameters from general file format, and do register + * Read/Write + * + * Input: PADAPTER Adapter + * ps1Byte pFileName + * + * Output: NONE + * + * Return: RT_STATUS_SUCCESS: configuration file exist + * 2008/11/06 MH For 92S we do not support silent reset now. Disable + * parameter file compare!!!!!!?? + * + *---------------------------------------------------------------------------*/ +static int +phy_ConfigBBWithParaFile( + IN PADAPTER Adapter, + IN u8* pFileName +) +{ + HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); + + int rtStatus = _SUCCESS; + + return rtStatus; +} + + + +//**************************************** +// The following is for High Power PA +//**************************************** +VOID +phy_ConfigBBExternalPA( + IN PADAPTER Adapter +) +{ +#ifdef CONFIG_USB_HCI + HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); + u16 i=0; + u32 temp=0; + + if(!pHalData->ExternalPA) + { + return; + } + + // 2010/10/19 MH According to Jenyu/EEChou 's opinion, we need not to execute the + // same code as SU. It is already updated in PHY_REG_1T_HP.txt. +#if 0 + PHY_SetBBReg(Adapter, 0xee8, BIT28, 1); + temp = PHY_QueryBBReg(Adapter, 0x860, bMaskDWord); + temp |= (BIT26|BIT21|BIT10|BIT5); + PHY_SetBBReg(Adapter, 0x860, bMaskDWord, temp); + PHY_SetBBReg(Adapter, 0x870, BIT10, 0); + PHY_SetBBReg(Adapter, 0xc80, bMaskDWord, 0x20000080); + PHY_SetBBReg(Adapter, 0xc88, bMaskDWord, 0x40000100); +#endif + +#endif +} + +/*----------------------------------------------------------------------------- + * Function: phy_ConfigBBWithHeaderFile() + * + * Overview: This function read BB parameters from general file format, and do register + * Read/Write + * + * Input: PADAPTER Adapter + * u1Byte ConfigType 0 => PHY_CONFIG + * 1 =>AGC_TAB + * + * Output: NONE + * + * Return: RT_STATUS_SUCCESS: configuration file exist + * + *---------------------------------------------------------------------------*/ +static int +phy_ConfigBBWithHeaderFile( + IN PADAPTER Adapter, + IN u8 ConfigType +) +{ + int i; + u32* Rtl819XPHY_REGArray_Table; + u32* Rtl819XAGCTAB_Array_Table; + u16 PHY_REGArrayLen, AGCTAB_ArrayLen; + HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); + int ret = _SUCCESS; + + // + // 2009.11.24. Modified by tynli. + // + if(IS_92C_SERIAL(pHalData->VersionID)) + { + AGCTAB_ArrayLen = AGCTAB_2TArrayLength; + Rtl819XAGCTAB_Array_Table = Rtl819XAGCTAB_2TArray; + PHY_REGArrayLen = PHY_REG_2TArrayLength; + Rtl819XPHY_REGArray_Table = Rtl819XPHY_REG_2TArray; +#ifdef CONFIG_USB_HCI + if(pHalData->BoardType == BOARD_MINICARD ) + { + PHY_REGArrayLen = PHY_REG_2T_mCardArrayLength; + Rtl819XPHY_REGArray_Table = Rtl819XPHY_REG_2T_mCardArray; + } +#endif + } + else + { + AGCTAB_ArrayLen = AGCTAB_1TArrayLength; + Rtl819XAGCTAB_Array_Table = Rtl819XAGCTAB_1TArray; + PHY_REGArrayLen = PHY_REG_1TArrayLength; + Rtl819XPHY_REGArray_Table = Rtl819XPHY_REG_1TArray; +#ifdef CONFIG_USB_HCI + if(pHalData->BoardType == BOARD_MINICARD ) + { + PHY_REGArrayLen = PHY_REG_1T_mCardArrayLength; + Rtl819XPHY_REGArray_Table = Rtl819XPHY_REG_1T_mCardArray; + } + else if(pHalData->BoardType == BOARD_USB_High_PA) + { + AGCTAB_ArrayLen = AGCTAB_1T_HPArrayLength; + Rtl819XAGCTAB_Array_Table = Rtl819XAGCTAB_1T_HPArray; + PHY_REGArrayLen = PHY_REG_1T_HPArrayLength; + Rtl819XPHY_REGArray_Table = Rtl819XPHY_REG_1T_HPArray; + } +#endif + } + + if(ConfigType == BaseBand_Config_PHY_REG) + { + #ifdef CONFIG_IOL_BB_PHY_REG + if(rtw_IOL_applied(Adapter)) + { + struct xmit_frame *xmit_frame; + u32 tmp_value; + + if((xmit_frame=rtw_IOL_accquire_xmit_frame(Adapter)) == NULL) { + ret = _FAIL; + goto exit; + } + + for(i=0;i<PHY_REGArrayLen;i=i+2) + { + tmp_value=Rtl819XPHY_REGArray_Table[i+1]; + + if (Rtl819XPHY_REGArray_Table[i] == 0xfe) + rtw_IOL_append_DELAY_MS_cmd(xmit_frame, 50); + else if (Rtl819XPHY_REGArray_Table[i] == 0xfd) + rtw_IOL_append_DELAY_MS_cmd(xmit_frame, 5); + else if (Rtl819XPHY_REGArray_Table[i] == 0xfc) + rtw_IOL_append_DELAY_MS_cmd(xmit_frame, 1); + else if (Rtl819XPHY_REGArray_Table[i] == 0xfb) + rtw_IOL_append_DELAY_US_cmd(xmit_frame, 50); + else if (Rtl819XPHY_REGArray_Table[i] == 0xfa) + rtw_IOL_append_DELAY_US_cmd(xmit_frame, 5); + else if (Rtl819XPHY_REGArray_Table[i] == 0xf9) + rtw_IOL_append_DELAY_US_cmd(xmit_frame, 1); + + rtw_IOL_append_WD_cmd(xmit_frame, Rtl819XPHY_REGArray_Table[i], tmp_value); + //RT_TRACE(COMP_INIT, DBG_TRACE, ("The Rtl819XPHY_REGArray_Table[0] is %lx Rtl819XPHY_REGArray[1] is %lx \n",Rtl819XPHY_REGArray_Table[i], Rtl819XPHY_REGArray_Table[i+1])); + } + + ret = rtw_IOL_exec_cmds_sync(Adapter, xmit_frame, 1000); + } + else + #endif + { + for(i=0;i<PHY_REGArrayLen;i=i+2) + { + if (Rtl819XPHY_REGArray_Table[i] == 0xfe){ + #ifdef CONFIG_LONG_DELAY_ISSUE + rtw_msleep_os(50); + #else + rtw_mdelay_os(50); + #endif + } + else if (Rtl819XPHY_REGArray_Table[i] == 0xfd) + rtw_mdelay_os(5); + else if (Rtl819XPHY_REGArray_Table[i] == 0xfc) + rtw_mdelay_os(1); + else if (Rtl819XPHY_REGArray_Table[i] == 0xfb) + rtw_udelay_os(50); + else if (Rtl819XPHY_REGArray_Table[i] == 0xfa) + rtw_udelay_os(5); + else if (Rtl819XPHY_REGArray_Table[i] == 0xf9) + rtw_udelay_os(1); + + PHY_SetBBReg(Adapter, Rtl819XPHY_REGArray_Table[i], bMaskDWord, Rtl819XPHY_REGArray_Table[i+1]); + + // Add 1us delay between BB/RF register setting. + rtw_udelay_os(1); + + //RT_TRACE(COMP_INIT, DBG_TRACE, ("The Rtl819XPHY_REGArray_Table[0] is %lx Rtl819XPHY_REGArray[1] is %lx \n",Rtl819XPHY_REGArray_Table[i], Rtl819XPHY_REGArray_Table[i+1])); + } + } + + // for External PA + phy_ConfigBBExternalPA(Adapter); + } + else if(ConfigType == BaseBand_Config_AGC_TAB) + { + #ifdef CONFIG_IOL_BB_AGC_TAB + if(rtw_IOL_applied(Adapter)) + { + struct xmit_frame *xmit_frame; + + if((xmit_frame=rtw_IOL_accquire_xmit_frame(Adapter)) == NULL) { + ret = _FAIL; + goto exit; + } + + for(i=0;i<AGCTAB_ArrayLen;i=i+2) + { + rtw_IOL_append_WD_cmd(xmit_frame, Rtl819XAGCTAB_Array_Table[i], Rtl819XAGCTAB_Array_Table[i+1]); + //RT_TRACE(COMP_INIT, DBG_TRACE, ("The Rtl819XAGCTAB_Array_Table[0] is %lx Rtl819XPHY_REGArray[1] is %lx \n",Rtl819XAGCTAB_Array_Table[i], Rtl819XAGCTAB_Array_Table[i+1])); + } + + ret = rtw_IOL_exec_cmds_sync(Adapter, xmit_frame, 1000); + } + else + #endif + { + for(i=0;i<AGCTAB_ArrayLen;i=i+2) + { + PHY_SetBBReg(Adapter, Rtl819XAGCTAB_Array_Table[i], bMaskDWord, Rtl819XAGCTAB_Array_Table[i+1]); + + // Add 1us delay between BB/RF register setting. + rtw_udelay_os(1); + + //RT_TRACE(COMP_INIT, DBG_TRACE, ("The Rtl819XAGCTAB_Array_Table[0] is %lx Rtl819XPHY_REGArray[1] is %lx \n",Rtl819XAGCTAB_Array_Table[i], Rtl819XAGCTAB_Array_Table[i+1])); + } + } + } + +exit: + return ret; + +} + + +VOID +storePwrIndexDiffRateOffset( + IN PADAPTER Adapter, + IN u32 RegAddr, + IN u32 BitMask, + IN u32 Data + ) +{ + HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); + + if(RegAddr == rTxAGC_A_Rate18_06) + { + pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][0] = Data; + //RT_TRACE(COMP_INIT, DBG_TRACE, ("MCSTxPowerLevelOriginalOffset[%d][0] = 0x%lx\n", pHalData->pwrGroupCnt, + // pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][0])); + } + if(RegAddr == rTxAGC_A_Rate54_24) + { + pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][1] = Data; + //RT_TRACE(COMP_INIT, DBG_TRACE, ("MCSTxPowerLevelOriginalOffset[%d][1] = 0x%lx\n", pHalData->pwrGroupCnt, + // pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][1])); + } + if(RegAddr == rTxAGC_A_CCK1_Mcs32) + { + pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][6] = Data; + //RT_TRACE(COMP_INIT, DBG_TRACE, ("MCSTxPowerLevelOriginalOffset[%d][6] = 0x%lx\n", pHalData->pwrGroupCnt, + // pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][6])); + } + if(RegAddr == rTxAGC_B_CCK11_A_CCK2_11 && BitMask == 0xffffff00) + { + pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][7] = Data; + //RT_TRACE(COMP_INIT, DBG_TRACE, ("MCSTxPowerLevelOriginalOffset[%d][7] = 0x%lx\n", pHalData->pwrGroupCnt, + // pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][7])); + } + if(RegAddr == rTxAGC_A_Mcs03_Mcs00) + { + pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][2] = Data; + //RT_TRACE(COMP_INIT, DBG_TRACE, ("MCSTxPowerLevelOriginalOffset[%d][2] = 0x%lx\n", pHalData->pwrGroupCnt, + // pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][2])); + } + if(RegAddr == rTxAGC_A_Mcs07_Mcs04) + { + pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][3] = Data; + //RT_TRACE(COMP_INIT, DBG_TRACE, ("MCSTxPowerLevelOriginalOffset[%d][3] = 0x%lx\n", pHalData->pwrGroupCnt, + // pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][3])); + } + if(RegAddr == rTxAGC_A_Mcs11_Mcs08) + { + pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][4] = Data; + //RT_TRACE(COMP_INIT, DBG_TRACE, ("MCSTxPowerLevelOriginalOffset[%d][4] = 0x%lx\n", pHalData->pwrGroupCnt, + // pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][4])); + } + if(RegAddr == rTxAGC_A_Mcs15_Mcs12) + { + pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][5] = Data; + //RT_TRACE(COMP_INIT, DBG_TRACE, ("MCSTxPowerLevelOriginalOffset[%d][5] = 0x%lx\n", pHalData->pwrGroupCnt, + // pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][5])); + } + if(RegAddr == rTxAGC_B_Rate18_06) + { + pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][8] = Data; + //RT_TRACE(COMP_INIT, DBG_TRACE, ("MCSTxPowerLevelOriginalOffset[%d][8] = 0x%lx\n", pHalData->pwrGroupCnt, + // pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][8])); + } + if(RegAddr == rTxAGC_B_Rate54_24) + { + pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][9] = Data; + //RT_TRACE(COMP_INIT, DBG_TRACE, ("MCSTxPowerLevelOriginalOffset[%d][9] = 0x%lx\n", pHalData->pwrGroupCnt, + // pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][9])); + } + if(RegAddr == rTxAGC_B_CCK1_55_Mcs32) + { + pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][14] = Data; + //RT_TRACE(COMP_INIT, DBG_TRACE, ("MCSTxPowerLevelOriginalOffset[%d][14] = 0x%lx\n", pHalData->pwrGroupCnt, + // pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][14])); + } + if(RegAddr == rTxAGC_B_CCK11_A_CCK2_11 && BitMask == 0x000000ff) + { + pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][15] = Data; + //RT_TRACE(COMP_INIT, DBG_TRACE, ("MCSTxPowerLevelOriginalOffset[%d][15] = 0x%lx\n", pHalData->pwrGroupCnt, + // pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][15])); + } + if(RegAddr == rTxAGC_B_Mcs03_Mcs00) + { + pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][10] = Data; + //RT_TRACE(COMP_INIT, DBG_TRACE, ("MCSTxPowerLevelOriginalOffset[%d][10] = 0x%lx\n", pHalData->pwrGroupCnt, + // pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][10])); + } + if(RegAddr == rTxAGC_B_Mcs07_Mcs04) + { + pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][11] = Data; + //RT_TRACE(COMP_INIT, DBG_TRACE, ("MCSTxPowerLevelOriginalOffset[%d][11] = 0x%lx\n", pHalData->pwrGroupCnt, + // pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][11])); + } + if(RegAddr == rTxAGC_B_Mcs11_Mcs08) + { + pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][12] = Data; + //RT_TRACE(COMP_INIT, DBG_TRACE, ("MCSTxPowerLevelOriginalOffset[%d][12] = 0x%lx\n", pHalData->pwrGroupCnt, + // pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][12])); + } + if(RegAddr == rTxAGC_B_Mcs15_Mcs12) + { + pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][13] = Data; + //RT_TRACE(COMP_INIT, DBG_TRACE, ("MCSTxPowerLevelOriginalOffset[%d][13] = 0x%lx\n", pHalData->pwrGroupCnt, + // pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][13])); + pHalData->pwrGroupCnt++; + } +} +/*----------------------------------------------------------------------------- + * Function: phy_ConfigBBWithPgParaFile + * + * Overview: + * + * Input: NONE + * + * Output: NONE + * + * Return: NONE + * + * Revised History: + * When Who Remark + * 11/06/2008 MHC Create Version 0. + * 2009/07/29 tynli (porting from 92SE branch)2009/03/11 Add copy parameter file to buffer for silent reset + *---------------------------------------------------------------------------*/ +static int +phy_ConfigBBWithPgParaFile( + IN PADAPTER Adapter, + IN u8* pFileName) +{ + HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); + + int rtStatus = _SUCCESS; + + + return rtStatus; + +} /* phy_ConfigBBWithPgParaFile */ + + +/*----------------------------------------------------------------------------- + * Function: phy_ConfigBBWithPgHeaderFile + * + * Overview: Config PHY_REG_PG array + * + * Input: NONE + * + * Output: NONE + * + * Return: NONE + * + * Revised History: + * When Who Remark + * 11/06/2008 MHC Add later!!!!!!.. Please modify for new files!!!! + * 11/10/2008 tynli Modify to mew files. + *---------------------------------------------------------------------------*/ +static int +phy_ConfigBBWithPgHeaderFile( + IN PADAPTER Adapter, + IN u8 ConfigType) +{ + int i; + u32* Rtl819XPHY_REGArray_Table_PG; + u16 PHY_REGArrayPGLen; + HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); + + // Default: pHalData->RF_Type = RF_2T2R. + PHY_REGArrayPGLen = PHY_REG_Array_PGLength; + Rtl819XPHY_REGArray_Table_PG = Rtl819XPHY_REG_Array_PG; + +#ifdef CONFIG_USB_HCI +// 2010/10/19 Chiyoko According to Alex/Willson opinion, VAU/dongle can share the same PHY_REG_PG.txt +/* + if(pHalData->BoardType == BOARD_MINICARD ) + { + PHY_REGArrayPGLen = PHY_REG_Array_PG_mCardLength; + Rtl819XPHY_REGArray_Table_PG = Rtl819XPHY_REG_Array_PG_mCard; + } + else */if(pHalData->BoardType ==BOARD_USB_High_PA ) + { + PHY_REGArrayPGLen = PHY_REG_Array_PG_HPLength; + Rtl819XPHY_REGArray_Table_PG = Rtl819XPHY_REG_Array_PG_HP; + } +#endif + + if(ConfigType == BaseBand_Config_PHY_REG) + { + for(i=0;i<PHY_REGArrayPGLen;i=i+3) + { + #if 0 //without IO, no delay is neeeded... + if (Rtl819XPHY_REGArray_Table_PG[i] == 0xfe){ + #ifdef CONFIG_LONG_DELAY_ISSUE + rtw_msleep_os(50); + #else + rtw_mdelay_os(50); + #endif + } + else if (Rtl819XPHY_REGArray_Table_PG[i] == 0xfd) + rtw_mdelay_os(5); + else if (Rtl819XPHY_REGArray_Table_PG[i] == 0xfc) + rtw_mdelay_os(1); + else if (Rtl819XPHY_REGArray_Table_PG[i] == 0xfb) + rtw_udelay_os(50); + else if (Rtl819XPHY_REGArray_Table_PG[i] == 0xfa) + rtw_udelay_os(5); + else if (Rtl819XPHY_REGArray_Table_PG[i] == 0xf9) + rtw_udelay_os(1); + //PHY_SetBBReg(Adapter, Rtl819XPHY_REGArray_Table_PG[i], Rtl819XPHY_REGArray_Table_PG[i+1], Rtl819XPHY_REGArray_Table_PG[i+2]); + #endif + + storePwrIndexDiffRateOffset(Adapter, Rtl819XPHY_REGArray_Table_PG[i], + Rtl819XPHY_REGArray_Table_PG[i+1], + Rtl819XPHY_REGArray_Table_PG[i+2]); + //RT_TRACE(COMP_SEND, DBG_TRACE, ("The Rtl819XPHY_REGArray_Table_PG[0] is %lx Rtl819XPHY_REGArray_Table_PG[1] is %lx \n",Rtl819XPHY_REGArray_Table_PG[i], Rtl819XPHY_REGArray_Table_PG[i+1])); + } + } + else + { + + //RT_TRACE(COMP_SEND, DBG_LOUD, ("phy_ConfigBBWithPgHeaderFile(): ConfigType != BaseBand_Config_PHY_REG\n")); + } + + return _SUCCESS; + +} /* phy_ConfigBBWithPgHeaderFile */ + +#if (MP_DRIVER == 1) + +/*----------------------------------------------------------------------------- + * Function: phy_ConfigBBWithMpParaFile() + * + * Overview: This function read BB parameters from general file format, and do register + * Read/Write + * + * Input: PADAPTER Adapter + * ps1Byte pFileName + * + * Output: NONE + * + * Return: RT_STATUS_SUCCESS: configuration file exist + * 2008/11/06 MH For 92S we do not support silent reset now. Disable + * parameter file compare!!!!!!?? + * + *---------------------------------------------------------------------------*/ +static int +phy_ConfigBBWithMpParaFile( + IN PADAPTER Adapter, + IN u8* pFileName +) +{ +#if 1 + int rtStatus = _SUCCESS; +#else + HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); + s4Byte nLinesRead, ithLine; + RT_STATUS rtStatus = RT_STATUS_SUCCESS; + ps1Byte szLine; + u4Byte u4bRegOffset, u4bRegMask, u4bRegValue; + u4Byte u4bMove; + + if(ADAPTER_TEST_STATUS_FLAG(Adapter, ADAPTER_STATUS_FIRST_INIT)) + { + rtStatus = PlatformReadFile( + Adapter, + pFileName, + (pu1Byte)(pHalData->BufOfLines), + MAX_LINES_HWCONFIG_TXT, + MAX_BYTES_LINE_HWCONFIG_TXT, + &nLinesRead + ); + if(rtStatus == RT_STATUS_SUCCESS) + { + PlatformMoveMemory(pHalData->BufOfLines6, pHalData->BufOfLines, nLinesRead*MAX_BYTES_LINE_HWCONFIG_TXT); + pHalData->nLinesRead6 = nLinesRead; + } + else + { + // Temporarily skip PHY_REG_MP.txt if file does not exist. + pHalData->nLinesRead6 = 0; + RT_TRACE(COMP_INIT, DBG_LOUD, ("No matched file \r\n")); + return RT_STATUS_SUCCESS; + } + } + else + { + PlatformMoveMemory(pHalData->BufOfLines, pHalData->BufOfLines6, MAX_LINES_HWCONFIG_TXT*MAX_BYTES_LINE_HWCONFIG_TXT); + nLinesRead = pHalData->nLinesRead6; + rtStatus = RT_STATUS_SUCCESS; + } + + + if(rtStatus == RT_STATUS_SUCCESS) + { + RT_TRACE(COMP_INIT, DBG_LOUD, ("phy_ConfigBBWithMpParaFile(): read %s ok\n", pFileName)); + + for(ithLine = 0; ithLine < nLinesRead; ithLine++) + { + szLine = pHalData->BufOfLines[ithLine]; + + if(!IsCommentString(szLine)) + { + // Get 1st hex value as register offset. + if(GetHexValueFromString(szLine, &u4bRegOffset, &u4bMove)) + { + if(u4bRegOffset == 0xff) + { // Ending. + break; + } + else if (u4bRegOffset == 0xfe) + delay_ms(50); + else if (u4bRegOffset == 0xfd) + delay_ms(5); + else if (u4bRegOffset == 0xfc) + delay_ms(1); + else if (u4bRegOffset == 0xfb) + PlatformStallExecution(50); + else if (u4bRegOffset == 0xfa) + PlatformStallExecution(5); + else if (u4bRegOffset == 0xf9) + PlatformStallExecution(1); + + // Get 2nd hex value as register value. + szLine += u4bMove; + if(GetHexValueFromString(szLine, &u4bRegValue, &u4bMove)) + { + RT_TRACE(COMP_FPGA, DBG_TRACE, ("[ADDR]%03lX=%08lX\n", u4bRegOffset, u4bRegValue)); + PHY_SetBBReg(Adapter, u4bRegOffset, bMaskDWord, u4bRegValue); + + // Add 1us delay between BB/RF register setting. + PlatformStallExecution(1); + } + } + } + } + } + else + { + RT_TRACE(COMP_INIT, DBG_LOUD, ("phy_ConfigBBWithMpParaFile(): Failed%s\n", pFileName)); + } +#endif + + return rtStatus; +} + +/*----------------------------------------------------------------------------- + * Function: phy_ConfigBBWithMpHeaderFile + * + * Overview: Config PHY_REG_MP array + * + * Input: NONE + * + * Output: NONE + * + * Return: NONE + * + * Revised History: + * When Who Remark + * 02/04/2010 chiyokolin Modify to new files. + *---------------------------------------------------------------------------*/ +static int +phy_ConfigBBWithMpHeaderFile( + IN PADAPTER Adapter, + IN u1Byte ConfigType) +{ + int i; + u32* Rtl8192CPHY_REGArray_Table_MP; + u16 PHY_REGArrayMPLen; + HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); + + PHY_REGArrayMPLen = PHY_REG_Array_MPLength; + Rtl8192CPHY_REGArray_Table_MP = Rtl819XPHY_REG_Array_MP; + + if(ConfigType == BaseBand_Config_PHY_REG) + { + for(i=0;i<PHY_REGArrayMPLen;i=i+2) + { + if (Rtl8192CPHY_REGArray_Table_MP[i] == 0xfe) { + #ifdef CONFIG_LONG_DELAY_ISSUE + rtw_msleep_os(50); + #else + rtw_mdelay_os(50); + #endif + } + else if (Rtl8192CPHY_REGArray_Table_MP[i] == 0xfd) + rtw_mdelay_os(5); + else if (Rtl8192CPHY_REGArray_Table_MP[i] == 0xfc) + rtw_mdelay_os(1); + else if (Rtl8192CPHY_REGArray_Table_MP[i] == 0xfb) { + #ifdef CONFIG_LONG_DELAY_ISSUE + rtw_msleep_os(50); + #else + rtw_mdelay_os(50); + #endif + } + else if (Rtl8192CPHY_REGArray_Table_MP[i] == 0xfa) + rtw_mdelay_os(5); + else if (Rtl8192CPHY_REGArray_Table_MP[i] == 0xf9) + rtw_mdelay_os(1); + PHY_SetBBReg(Adapter, Rtl8192CPHY_REGArray_Table_MP[i], bMaskDWord, Rtl8192CPHY_REGArray_Table_MP[i+1]); + + // Add 1us delay between BB/RF register setting. + rtw_mdelay_os(1); + +// RT_TRACE(COMP_INIT, DBG_TRACE, ("The Rtl8192CPHY_REGArray_Table_MP[%d] is %lx Rtl8192CPHY_REGArray_Table_MP[%d] is %lx \n", i, i+1, Rtl8192CPHY_REGArray_Table_MP[i], Rtl8192CPHY_REGArray_Table_MP[i+1])); + } + } + else + { +// RT_TRACE(COMP_SEND, DBG_LOUD, ("phy_ConfigBBWithMpHeaderFile(): ConfigType != BaseBand_Config_PHY_REG\n")); + } + + return _SUCCESS; +} /* phy_ConfigBBWithMpHeaderFile */ + +#endif // #if (MP_DRIVER == 1) + +static VOID +phy_BB8192C_Config_1T( + IN PADAPTER Adapter + ) +{ +#if 0 + //for path - A + PHY_SetBBReg(Adapter, rFPGA0_TxInfo, 0x3, 0x1); + PHY_SetBBReg(Adapter, rFPGA1_TxInfo, 0x0303, 0x0101); + PHY_SetBBReg(Adapter, 0xe74, 0x0c000000, 0x1); + PHY_SetBBReg(Adapter, 0xe78, 0x0c000000, 0x1); + PHY_SetBBReg(Adapter, 0xe7c, 0x0c000000, 0x1); + PHY_SetBBReg(Adapter, 0xe80, 0x0c000000, 0x1); + PHY_SetBBReg(Adapter, 0xe88, 0x0c000000, 0x1); +#endif + //for path - B + PHY_SetBBReg(Adapter, rFPGA0_TxInfo, 0x3, 0x2); + PHY_SetBBReg(Adapter, rFPGA1_TxInfo, 0x300033, 0x200022); + + // 20100519 Joseph: Add for 1T2R config. Suggested by Kevin, Jenyu and Yunan. + PHY_SetBBReg(Adapter, rCCK0_AFESetting, bMaskByte3, 0x45); + PHY_SetBBReg(Adapter, rOFDM0_TRxPathEnable, bMaskByte0, 0x23); + PHY_SetBBReg(Adapter, rOFDM0_AGCParameter1, 0x30, 0x1); // B path first AGC + + PHY_SetBBReg(Adapter, 0xe74, 0x0c000000, 0x2); + PHY_SetBBReg(Adapter, 0xe78, 0x0c000000, 0x2); + PHY_SetBBReg(Adapter, 0xe7c, 0x0c000000, 0x2); + PHY_SetBBReg(Adapter, 0xe80, 0x0c000000, 0x2); + PHY_SetBBReg(Adapter, 0xe88, 0x0c000000, 0x2); + + +} + +// Joseph test: new initialize order!! +// Test only!! This part need to be re-organized. +// Now it is just for 8256. +static int +phy_BB8190_Config_HardCode( + IN PADAPTER Adapter + ) +{ + //RT_ASSERT(FALSE, ("This function is not implement yet!! \n")); + return _SUCCESS; +} + +static int +phy_BB8192C_Config_ParaFile( + IN PADAPTER Adapter + ) +{ + EEPROM_EFUSE_PRIV *pEEPROM = GET_EEPROM_EFUSE_PRIV(Adapter); + HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); + int rtStatus = _SUCCESS; + + u8 szBBRegPgFile[] = RTL819X_PHY_REG_PG; + + u8 sz88CBBRegFile[] = RTL8188C_PHY_REG; + u8 sz88CAGCTableFile[] = RTL8188C_AGC_TAB; + + u8 sz92CBBRegFile[] = RTL8192C_PHY_REG; + u8 sz92CAGCTableFile[] = RTL8192C_AGC_TAB; + + u8 *pszBBRegFile, *pszAGCTableFile, *pszBBRegMpFile; + + //RT_TRACE(COMP_INIT, DBG_TRACE, ("==>phy_BB8192S_Config_ParaFile\n")); + + if(IS_92C_SERIAL(pHalData->VersionID)){ + pszBBRegFile=(u8*)&sz92CBBRegFile ; + pszAGCTableFile =(u8*)&sz92CAGCTableFile; + } + else{ + pszBBRegFile=(u8*)&sz88CBBRegFile ; + pszAGCTableFile =(u8*)&sz88CAGCTableFile; + } + + // + // 1. Read PHY_REG.TXT BB INIT!! + // We will seperate as 88C / 92C according to chip version + // +#ifdef CONFIG_EMBEDDED_FWIMG + rtStatus = phy_ConfigBBWithHeaderFile(Adapter, BaseBand_Config_PHY_REG); +#else + // No matter what kind of CHIP we always read PHY_REG.txt. We must copy different + // type of parameter files to phy_reg.txt at first. + rtStatus = phy_ConfigBBWithParaFile(Adapter,pszBBRegFile); +#endif + + if(rtStatus != _SUCCESS){ + //RT_TRACE(COMP_INIT, DBG_SERIOUS, ("phy_BB8192S_Config_ParaFile():Write BB Reg Fail!!")); + goto phy_BB8190_Config_ParaFile_Fail; + } + +#if MP_DRIVER == 1 + // + // 1.1 Read PHY_REG_MP.TXT BB INIT!! + // We will seperate as 88C / 92C according to chip version + // +#ifdef CONFIG_EMBEDDED_FWIMG + rtStatus = phy_ConfigBBWithMpHeaderFile(Adapter, BaseBand_Config_PHY_REG); +#else + // No matter what kind of CHIP we always read PHY_REG.txt. We must copy different + // type of parameter files to phy_reg.txt at first. + rtStatus = phy_ConfigBBWithMpParaFile(Adapter, pszBBRegMpFile); +#endif + + if(rtStatus != _SUCCESS){ +// RT_TRACE(COMP_INIT, DBG_SERIOUS, ("phy_BB8192S_Config_ParaFile():Write BB Reg MP Fail!!")); + goto phy_BB8190_Config_ParaFile_Fail; + } +#endif // #if (MP_DRIVER == 1) + + // + // 20100318 Joseph: Config 2T2R to 1T2R if necessary. + // + if(pHalData->rf_type == RF_1T2R) + { + phy_BB8192C_Config_1T(Adapter); + DBG_8192C("phy_BB8192C_Config_ParaFile():Config to 1T!!\n"); + } + + // + // 2. If EEPROM or EFUSE autoload OK, We must config by PHY_REG_PG.txt + // + if (pEEPROM->bautoload_fail_flag == _FALSE) + { + pHalData->pwrGroupCnt = 0; + +#ifdef CONFIG_EMBEDDED_FWIMG + rtStatus = phy_ConfigBBWithPgHeaderFile(Adapter, BaseBand_Config_PHY_REG); +#else + rtStatus = phy_ConfigBBWithPgParaFile(Adapter, (u8*)&szBBRegPgFile); +#endif + } + + if(rtStatus != _SUCCESS){ + //RT_TRACE(COMP_INIT, DBG_SERIOUS, ("phy_BB8192S_Config_ParaFile():BB_PG Reg Fail!!")); + goto phy_BB8190_Config_ParaFile_Fail; + } + + // + // 3. BB AGC table Initialization + // +#ifdef CONFIG_EMBEDDED_FWIMG + rtStatus = phy_ConfigBBWithHeaderFile(Adapter, BaseBand_Config_AGC_TAB); +#else + //RT_TRACE(COMP_INIT, DBG_LOUD, ("phy_BB8192S_Config_ParaFile AGC_TAB.txt\n")); + rtStatus = phy_ConfigBBWithParaFile(Adapter, pszAGCTableFile); +#endif + + if(rtStatus != _SUCCESS){ + //RT_TRACE(COMP_FPGA, DBG_SERIOUS, ("phy_BB8192S_Config_ParaFile():AGC Table Fail\n")); + goto phy_BB8190_Config_ParaFile_Fail; + } + + // Check if the CCK HighPower is turned ON. + // This is used to calculate PWDB. + pHalData->bCckHighPower = (BOOLEAN)(PHY_QueryBBReg(Adapter, rFPGA0_XA_HSSIParameter2, 0x200)); + +phy_BB8190_Config_ParaFile_Fail: + + return rtStatus; +} + + +int +PHY_BBConfig8192C( + IN PADAPTER Adapter + ) +{ + int rtStatus = _SUCCESS; + HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); + u32 RegVal; + u8 TmpU1B=0; + u8 value8; + + phy_InitBBRFRegisterDefinition(Adapter); + + if(IS_HARDWARE_TYPE_8723A(Adapter)) + { + // Suggested by Scott. tynli_test. 2010.12.30. + //1. 0x28[1] = 1 + TmpU1B = rtw_read8(Adapter, REG_AFE_PLL_CTRL); + rtw_udelay_os(2); + rtw_write8(Adapter, REG_AFE_PLL_CTRL, (TmpU1B|BIT1)); + rtw_udelay_os(2); + + //2. 0x29[7:0] = 0xFF + rtw_write8(Adapter, REG_AFE_PLL_CTRL+1, 0xff); + rtw_udelay_os(2); + + //3. 0x02[1:0] = 2b'11 + TmpU1B = rtw_read8(Adapter, REG_SYS_FUNC_EN); + rtw_write8(Adapter, REG_SYS_FUNC_EN, (TmpU1B|FEN_BB_GLB_RSTn|FEN_BBRSTB)); + + //undo clock gated + rtw_write32(Adapter, rFPGA0_XCD_RFParameter, rtw_read32(Adapter, rFPGA0_XCD_RFParameter)&(~BIT31)); + + //4. 0x25[6] = 0 + TmpU1B = rtw_read8(Adapter, REG_AFE_XTAL_CTRL+1); + rtw_write8(Adapter, REG_AFE_XTAL_CTRL+1, (TmpU1B&(~BIT6))); + + //5. 0x24[20] = 0 //Advised by SD3 Alex Wang. 2011.02.09. + TmpU1B = rtw_read8(Adapter, REG_AFE_XTAL_CTRL+2); + rtw_write8(Adapter, REG_AFE_XTAL_CTRL+2, (TmpU1B&(~BIT4))); + + //6. 0x1f[7:0] = 0x07 + rtw_write8(Adapter, REG_RF_CTRL, 0x07); + } + else + { + // Enable BB and RF + RegVal = rtw_read16(Adapter, REG_SYS_FUNC_EN); + rtw_write16(Adapter, REG_SYS_FUNC_EN, (u16)(RegVal|BIT13|BIT0|BIT1)); + + // 20090923 Joseph: Advised by Steven and Jenyu. Power sequence before init RF. + rtw_write8(Adapter, REG_AFE_PLL_CTRL, 0x83); + rtw_write8(Adapter, REG_AFE_PLL_CTRL+1, 0xdb); + + rtw_write8(Adapter, REG_RF_CTRL, RF_EN|RF_RSTB|RF_SDMRSTB); + +#ifdef CONFIG_USB_HCI + rtw_write8(Adapter, REG_SYS_FUNC_EN, FEN_USBA | FEN_USBD | FEN_BB_GLB_RSTn | FEN_BBRSTB); +#else + rtw_write8(Adapter, REG_SYS_FUNC_EN, FEN_PPLL|FEN_PCIEA|FEN_DIO_PCIE|FEN_BB_GLB_RSTn|FEN_BBRSTB); +#endif + + //undo clock gated + rtw_write32(Adapter, rFPGA0_XCD_RFParameter, rtw_read32(Adapter, rFPGA0_XCD_RFParameter)&(~BIT31)); + + // 2009/10/21 by SD1 Jong. Modified by tynli. Not in Documented in V8.1. +#ifdef CONFIG_USB_HCI + //To Fix MAC loopback mode fail. Suggested by SD4 Johnny. 2010.03.23. + rtw_write8(Adapter, REG_LDOHCI12_CTRL, 0x0f); + rtw_write8(Adapter, 0x15, 0xe9); +#endif + + rtw_write8(Adapter, REG_AFE_XTAL_CTRL+1, 0x80); + +#ifdef CONFIG_PCI_HCI + // Force use left antenna by default for 88C. + // if(!IS_92C_SERIAL(pHalData->VersionID) || IS_92C_1T2R(pHalData->VersionID)) + if(Adapter->ledpriv.LedStrategy != SW_LED_MODE10) + { + RegVal = rtw_read32(Adapter, REG_LEDCFG0); + rtw_write32(Adapter, REG_LEDCFG0, RegVal|BIT23); + } +#endif + } + + // + // Config BB and AGC + // + rtStatus = phy_BB8192C_Config_ParaFile(Adapter); +#if 0 + switch(Adapter->MgntInfo.bRegHwParaFile) + { + case 0: + phy_BB8190_Config_HardCode(Adapter); + break; + + case 1: + rtStatus = phy_BB8192C_Config_ParaFile(Adapter); + break; + + case 2: + // Partial Modify. + phy_BB8190_Config_HardCode(Adapter); + phy_BB8192C_Config_ParaFile(Adapter); + break; + + default: + phy_BB8190_Config_HardCode(Adapter); + break; + } +#endif +#ifdef CONFIG_USB_HCI + if(IS_HARDWARE_TYPE_8192CU(Adapter)&&IS_81xxC_VENDOR_UMC_B_CUT(pHalData->VersionID) + &&(pHalData->BoardType == BOARD_USB_High_PA)) + rtw_write8(Adapter, 0xc72, 0x50); +#endif + + return rtStatus; +} + + +int +PHY_RFConfig8192C( + IN PADAPTER Adapter + ) +{ + HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); + int rtStatus = _SUCCESS; + + // + // RF config + // + rtStatus = PHY_RF6052_Config8192C(Adapter); +#if 0 + switch(pHalData->rf_chip) + { + case RF_6052: + rtStatus = PHY_RF6052_Config(Adapter); + break; + case RF_8225: + rtStatus = PHY_RF8225_Config(Adapter); + break; + case RF_8256: + rtStatus = PHY_RF8256_Config(Adapter); + break; + case RF_8258: + break; + case RF_PSEUDO_11N: + rtStatus = PHY_RF8225_Config(Adapter); + break; + default: //for MacOs Warning: "RF_TYPE_MIN" not handled in switch + break; + } +#endif + return rtStatus; +} + + +/*----------------------------------------------------------------------------- + * Function: PHY_ConfigRFWithParaFile() + * + * Overview: This function read RF parameters from general file format, and do RF 3-wire + * + * Input: PADAPTER Adapter + * ps1Byte pFileName + * RF_RADIO_PATH_E eRFPath + * + * Output: NONE + * + * Return: RT_STATUS_SUCCESS: configuration file exist + * + * Note: Delay may be required for RF configuration + *---------------------------------------------------------------------------*/ +int +rtl8192c_PHY_ConfigRFWithParaFile( + IN PADAPTER Adapter, + IN u8* pFileName, + RF_RADIO_PATH_E eRFPath +) +{ + HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); + + int rtStatus = _SUCCESS; + + + return rtStatus; + +} + +//**************************************** +// The following is for High Power PA +//**************************************** +#define HighPowerRadioAArrayLen 22 +//This is for High power PA +u32 Rtl8192S_HighPower_RadioA_Array[HighPowerRadioAArrayLen] = { +0x013,0x00029ea4, +0x013,0x00025e74, +0x013,0x00020ea4, +0x013,0x0001ced0, +0x013,0x00019f40, +0x013,0x00014e70, +0x013,0x000106a0, +0x013,0x0000c670, +0x013,0x000082a0, +0x013,0x00004270, +0x013,0x00000240, +}; + +int +PHY_ConfigRFExternalPA( + IN PADAPTER Adapter, + RF_RADIO_PATH_E eRFPath +) +{ + int rtStatus = _SUCCESS; +#ifdef CONFIG_USB_HCI + HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); + u16 i=0; + + if(!pHalData->ExternalPA) + { + return rtStatus; + } + + // 2010/10/19 MH According to Jenyu/EEChou 's opinion, we need not to execute the + // same code as SU. It is already updated in radio_a_1T_HP.txt. +#if 0 + //add for SU High Power PA + for(i = 0;i<HighPowerRadioAArrayLen; i=i+2) + { + RT_TRACE(COMP_INIT, DBG_LOUD, ("External PA, write RF 0x%lx=0x%lx\n", Rtl8192S_HighPower_RadioA_Array[i], Rtl8192S_HighPower_RadioA_Array[i+1])); + PHY_SetRFReg(Adapter, eRFPath, Rtl8192S_HighPower_RadioA_Array[i], bRFRegOffsetMask, Rtl8192S_HighPower_RadioA_Array[i+1]); + } +#endif + +#endif + return rtStatus; +} +//**************************************** +/*----------------------------------------------------------------------------- + * Function: PHY_ConfigRFWithHeaderFile() + * + * Overview: This function read RF parameters from general file format, and do RF 3-wire + * + * Input: PADAPTER Adapter + * ps1Byte pFileName + * RF_RADIO_PATH_E eRFPath + * + * Output: NONE + * + * Return: RT_STATUS_SUCCESS: configuration file exist + * + * Note: Delay may be required for RF configuration + *---------------------------------------------------------------------------*/ +int +rtl8192c_PHY_ConfigRFWithHeaderFile( + IN PADAPTER Adapter, + RF_RADIO_PATH_E eRFPath +) +{ + + int i; + int rtStatus = _SUCCESS; + u32* Rtl819XRadioA_Array_Table; + u32* Rtl819XRadioB_Array_Table; + u16 RadioA_ArrayLen,RadioB_ArrayLen; + HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); + + // + // 2009.11.24. Modified by tynli. + // + if(IS_92C_SERIAL(pHalData->VersionID)) + { + RadioA_ArrayLen = RadioA_2TArrayLength; + Rtl819XRadioA_Array_Table = Rtl819XRadioA_2TArray; + RadioB_ArrayLen = RadioB_2TArrayLength; + Rtl819XRadioB_Array_Table = Rtl819XRadioB_2TArray; + } + else + { + RadioA_ArrayLen = RadioA_1TArrayLength; + Rtl819XRadioA_Array_Table = Rtl819XRadioA_1TArray; + RadioB_ArrayLen = RadioB_1TArrayLength; + Rtl819XRadioB_Array_Table = Rtl819XRadioB_1TArray; +#ifdef CONFIG_USB_HCI + if( BOARD_MINICARD == pHalData->BoardType ) + { + RadioA_ArrayLen = RadioA_1T_mCardArrayLength; + Rtl819XRadioA_Array_Table = Rtl819XRadioA_1T_mCardArray; + RadioB_ArrayLen = RadioB_1T_mCardArrayLength; + Rtl819XRadioB_Array_Table = Rtl819XRadioB_1T_mCardArray; + } + else if( BOARD_USB_High_PA == pHalData->BoardType ) + { + RadioA_ArrayLen = RadioA_1T_HPArrayLength; + Rtl819XRadioA_Array_Table = Rtl819XRadioA_1T_HPArray; + } +#endif + } + + switch(eRFPath){ + case RF_PATH_A: + #ifdef CONFIG_IOL_RF_RF90_PATH_A + if(rtw_IOL_applied(Adapter)) + { + struct xmit_frame *xmit_frame; + if((xmit_frame=rtw_IOL_accquire_xmit_frame(Adapter)) == NULL) { + rtStatus = _FAIL; + goto exit; + } + + for(i = 0;i<RadioA_ArrayLen; i=i+2) + { + if(Rtl819XRadioA_Array_Table[i] == 0xfe) + rtw_IOL_append_DELAY_MS_cmd(xmit_frame, 50); + else if (Rtl819XRadioA_Array_Table[i] == 0xfd) + rtw_IOL_append_DELAY_MS_cmd(xmit_frame, 5); + else if (Rtl819XRadioA_Array_Table[i] == 0xfc) + rtw_IOL_append_DELAY_MS_cmd(xmit_frame, 1); + else if (Rtl819XRadioA_Array_Table[i] == 0xfb) + rtw_IOL_append_DELAY_US_cmd(xmit_frame, 50); + else if (Rtl819XRadioA_Array_Table[i] == 0xfa) + rtw_IOL_append_DELAY_US_cmd(xmit_frame, 5); + else if (Rtl819XRadioA_Array_Table[i] == 0xf9) + rtw_IOL_append_DELAY_US_cmd(xmit_frame, 1); + else + { + BB_REGISTER_DEFINITION_T *pPhyReg = &pHalData->PHYRegDef[eRFPath]; + u32 NewOffset = 0; + u32 DataAndAddr = 0; + + NewOffset = Rtl819XRadioA_Array_Table[i] & 0x3f; + DataAndAddr = ((NewOffset<<20) | (Rtl819XRadioA_Array_Table[i+1]&0x000fffff)) & 0x0fffffff; // T65 RF + rtw_IOL_append_WD_cmd(xmit_frame, pPhyReg->rf3wireOffset, DataAndAddr); + } + } + rtStatus = rtw_IOL_exec_cmds_sync(Adapter, xmit_frame, 1000); + } + else + #endif + { + for(i = 0;i<RadioA_ArrayLen; i=i+2) + { + if(Rtl819XRadioA_Array_Table[i] == 0xfe) { + #ifdef CONFIG_LONG_DELAY_ISSUE + rtw_msleep_os(50); + #else + rtw_mdelay_os(50); + #endif + } + else if (Rtl819XRadioA_Array_Table[i] == 0xfd) + rtw_mdelay_os(5); + else if (Rtl819XRadioA_Array_Table[i] == 0xfc) + rtw_mdelay_os(1); + else if (Rtl819XRadioA_Array_Table[i] == 0xfb) + rtw_udelay_os(50); + else if (Rtl819XRadioA_Array_Table[i] == 0xfa) + rtw_udelay_os(5); + else if (Rtl819XRadioA_Array_Table[i] == 0xf9) + rtw_udelay_os(1); + else + { + PHY_SetRFReg(Adapter, eRFPath, Rtl819XRadioA_Array_Table[i], bRFRegOffsetMask, Rtl819XRadioA_Array_Table[i+1]); + // Add 1us delay between BB/RF register setting. + rtw_udelay_os(1); + } + } + } + + //Add for High Power PA + PHY_ConfigRFExternalPA(Adapter, eRFPath); + break; + case RF_PATH_B: + #ifdef CONFIG_IOL_RF_RF90_PATH_B + if(rtw_IOL_applied(Adapter)) + { + struct xmit_frame *xmit_frame; + if((xmit_frame=rtw_IOL_accquire_xmit_frame(Adapter)) == NULL) { + rtStatus = _FAIL; + goto exit; + } + + for(i = 0;i<RadioB_ArrayLen; i=i+2) + { + if(Rtl819XRadioB_Array_Table[i] == 0xfe) + rtw_IOL_append_DELAY_MS_cmd(xmit_frame, 50); + else if (Rtl819XRadioB_Array_Table[i] == 0xfd) + rtw_IOL_append_DELAY_MS_cmd(xmit_frame, 5); + else if (Rtl819XRadioB_Array_Table[i] == 0xfc) + rtw_IOL_append_DELAY_MS_cmd(xmit_frame, 1); + else if (Rtl819XRadioB_Array_Table[i] == 0xfb) + rtw_IOL_append_DELAY_US_cmd(xmit_frame, 50); + else if (Rtl819XRadioB_Array_Table[i] == 0xfa) + rtw_IOL_append_DELAY_US_cmd(xmit_frame, 5); + else if (Rtl819XRadioB_Array_Table[i] == 0xf9) + rtw_IOL_append_DELAY_US_cmd(xmit_frame, 1); + else + { + BB_REGISTER_DEFINITION_T *pPhyReg = &pHalData->PHYRegDef[eRFPath]; + u32 NewOffset = 0; + u32 DataAndAddr = 0; + + NewOffset = Rtl819XRadioB_Array_Table[i] & 0x3f; + DataAndAddr = ((NewOffset<<20) | (Rtl819XRadioB_Array_Table[i+1]&0x000fffff)) & 0x0fffffff; // T65 RF + rtw_IOL_append_WD_cmd(xmit_frame, pPhyReg->rf3wireOffset, DataAndAddr); + } + } + rtStatus = rtw_IOL_exec_cmds_sync(Adapter, xmit_frame, 1000); + } + else + #endif + { + for(i = 0;i<RadioB_ArrayLen; i=i+2) + { + if(Rtl819XRadioB_Array_Table[i] == 0xfe) + { // Deay specific ms. Only RF configuration require delay. +#if 0//#ifdef CONFIG_USB_HCI + #ifdef CONFIG_LONG_DELAY_ISSUE + rtw_msleep_os(1000); + #else + rtw_mdelay_os(1000); + #endif +#else + #ifdef CONFIG_LONG_DELAY_ISSUE + rtw_msleep_os(50); + #else + rtw_mdelay_os(50); + #endif +#endif + } + else if (Rtl819XRadioB_Array_Table[i] == 0xfd) + rtw_mdelay_os(5); + else if (Rtl819XRadioB_Array_Table[i] == 0xfc) + rtw_mdelay_os(1); + else if (Rtl819XRadioB_Array_Table[i] == 0xfb) + rtw_udelay_os(50); + else if (Rtl819XRadioB_Array_Table[i] == 0xfa) + rtw_udelay_os(5); + else if (Rtl819XRadioB_Array_Table[i] == 0xf9) + rtw_udelay_os(1); + else + { + PHY_SetRFReg(Adapter, eRFPath, Rtl819XRadioB_Array_Table[i], bRFRegOffsetMask, Rtl819XRadioB_Array_Table[i+1]); + // Add 1us delay between BB/RF register setting. + rtw_udelay_os(1); + } + } + } + + break; + case RF_PATH_C: + break; + case RF_PATH_D: + break; + } + +exit: + return rtStatus; + +} + + +/*----------------------------------------------------------------------------- + * Function: PHY_CheckBBAndRFOK() + * + * Overview: This function is write register and then readback to make sure whether + * BB[PHY0, PHY1], RF[Patha, path b, path c, path d] is Ok + * + * Input: PADAPTER Adapter + * HW90_BLOCK_E CheckBlock + * RF_RADIO_PATH_E eRFPath // it is used only when CheckBlock is HW90_BLOCK_RF + * + * Output: NONE + * + * Return: RT_STATUS_SUCCESS: PHY is OK + * + * Note: This function may be removed in the ASIC + *---------------------------------------------------------------------------*/ +int +PHY_CheckBBAndRFOK( + IN PADAPTER Adapter, + IN HW90_BLOCK_E CheckBlock, + IN RF_RADIO_PATH_E eRFPath + ) +{ + int rtStatus = _SUCCESS; + + u32 i, CheckTimes = 4,ulRegRead = 0; + + u32 WriteAddr[4]; + u32 WriteData[] = {0xfffff027, 0xaa55a02f, 0x00000027, 0x55aa502f}; + + // Initialize register address offset to be checked + WriteAddr[HW90_BLOCK_MAC] = 0x100; + WriteAddr[HW90_BLOCK_PHY0] = 0x900; + WriteAddr[HW90_BLOCK_PHY1] = 0x800; + WriteAddr[HW90_BLOCK_RF] = 0x3; + + for(i=0 ; i < CheckTimes ; i++) + { + + // + // Write Data to register and readback + // + switch(CheckBlock) + { + case HW90_BLOCK_MAC: + //RT_ASSERT(FALSE, ("PHY_CheckBBRFOK(): Never Write 0x100 here!")); + //RT_TRACE(COMP_INIT, DBG_LOUD, ("PHY_CheckBBRFOK(): Never Write 0x100 here!\n")); + break; + + case HW90_BLOCK_PHY0: + case HW90_BLOCK_PHY1: + rtw_write32(Adapter, WriteAddr[CheckBlock], WriteData[i]); + ulRegRead = rtw_read32(Adapter, WriteAddr[CheckBlock]); + break; + + case HW90_BLOCK_RF: + // When initialization, we want the delay function(delay_ms(), delay_us() + // ==> actually we call PlatformStallExecution()) to do NdisStallExecution() + // [busy wait] instead of NdisMSleep(). So we acquire RT_INITIAL_SPINLOCK + // to run at Dispatch level to achive it. + //cosa PlatformAcquireSpinLock(Adapter, RT_INITIAL_SPINLOCK); + WriteData[i] &= 0xfff; + PHY_SetRFReg(Adapter, eRFPath, WriteAddr[HW90_BLOCK_RF], bRFRegOffsetMask, WriteData[i]); + // TODO: we should not delay for such a long time. Ask SD3 + rtw_mdelay_os(10); + ulRegRead = PHY_QueryRFReg(Adapter, eRFPath, WriteAddr[HW90_BLOCK_RF], bMaskDWord); + rtw_mdelay_os(10); + //cosa PlatformReleaseSpinLock(Adapter, RT_INITIAL_SPINLOCK); + break; + + default: + rtStatus = _FAIL; + break; + } + + + // + // Check whether readback data is correct + // + if(ulRegRead != WriteData[i]) + { + //RT_TRACE(COMP_FPGA, DBG_LOUD, ("ulRegRead: %lx, WriteData: %lx \n", ulRegRead, WriteData[i])); + rtStatus = _FAIL; + break; + } + } + + return rtStatus; +} + + +VOID +rtl8192c_PHY_GetHWRegOriginalValue( + IN PADAPTER Adapter + ) +{ + HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); + + // read rx initial gain + pHalData->DefaultInitialGain[0] = (u8)PHY_QueryBBReg(Adapter, rOFDM0_XAAGCCore1, bMaskByte0); + pHalData->DefaultInitialGain[1] = (u8)PHY_QueryBBReg(Adapter, rOFDM0_XBAGCCore1, bMaskByte0); + pHalData->DefaultInitialGain[2] = (u8)PHY_QueryBBReg(Adapter, rOFDM0_XCAGCCore1, bMaskByte0); + pHalData->DefaultInitialGain[3] = (u8)PHY_QueryBBReg(Adapter, rOFDM0_XDAGCCore1, bMaskByte0); + //RT_TRACE(COMP_INIT, DBG_LOUD, + //("Default initial gain (c50=0x%x, c58=0x%x, c60=0x%x, c68=0x%x) \n", + //pHalData->DefaultInitialGain[0], pHalData->DefaultInitialGain[1], + //pHalData->DefaultInitialGain[2], pHalData->DefaultInitialGain[3])); + + // read framesync + pHalData->framesync = (u8)PHY_QueryBBReg(Adapter, rOFDM0_RxDetector3, bMaskByte0); + pHalData->framesyncC34 = PHY_QueryBBReg(Adapter, rOFDM0_RxDetector2, bMaskDWord); + //RT_TRACE(COMP_INIT, DBG_LOUD, ("Default framesync (0x%x) = 0x%x \n", + // rOFDM0_RxDetector3, pHalData->framesync)); +} + + +// +// Description: +// Map dBm into Tx power index according to +// current HW model, for example, RF and PA, and +// current wireless mode. +// By Bruce, 2008-01-29. +// +static u8 +phy_DbmToTxPwrIdx( + IN PADAPTER Adapter, + IN WIRELESS_MODE WirelessMode, + IN int PowerInDbm + ) +{ + u8 TxPwrIdx = 0; + int Offset = 0; + + + // + // Tested by MP, we found that CCK Index 0 equals to 8dbm, OFDM legacy equals to + // 3dbm, and OFDM HT equals to 0dbm repectively. + // Note: + // The mapping may be different by different NICs. Do not use this formula for what needs accurate result. + // By Bruce, 2008-01-29. + // + switch(WirelessMode) + { + case WIRELESS_MODE_B: + Offset = -7; + break; + + case WIRELESS_MODE_G: + case WIRELESS_MODE_N_24G: + Offset = -8; + break; + default: + Offset = -8; + break; + } + + if((PowerInDbm - Offset) > 0) + { + TxPwrIdx = (u8)((PowerInDbm - Offset) * 2); + } + else + { + TxPwrIdx = 0; + } + + // Tx Power Index is too large. + if(TxPwrIdx > MAX_TXPWR_IDX_NMODE_92S) + TxPwrIdx = MAX_TXPWR_IDX_NMODE_92S; + + return TxPwrIdx; +} + +// +// Description: +// Map Tx power index into dBm according to +// current HW model, for example, RF and PA, and +// current wireless mode. +// By Bruce, 2008-01-29. +// +int +phy_TxPwrIdxToDbm( + IN PADAPTER Adapter, + IN WIRELESS_MODE WirelessMode, + IN u8 TxPwrIdx + ) +{ + int Offset = 0; + int PwrOutDbm = 0; + + // + // Tested by MP, we found that CCK Index 0 equals to -7dbm, OFDM legacy equals to -8dbm. + // Note: + // The mapping may be different by different NICs. Do not use this formula for what needs accurate result. + // By Bruce, 2008-01-29. + // + switch(WirelessMode) + { + case WIRELESS_MODE_B: + Offset = -7; + break; + + case WIRELESS_MODE_G: + case WIRELESS_MODE_N_24G: + Offset = -8; + default: + Offset = -8; + break; + } + + PwrOutDbm = TxPwrIdx / 2 + Offset; // Discard the decimal part. + + return PwrOutDbm; +} + + +/*----------------------------------------------------------------------------- + * Function: GetTxPowerLevel8190() + * + * Overview: This function is export to "common" moudule + * + * Input: PADAPTER Adapter + * psByte Power Level + * + * Output: NONE + * + * Return: NONE + * + *---------------------------------------------------------------------------*/ +VOID +PHY_GetTxPowerLevel8192C( + IN PADAPTER Adapter, + OUT u32* powerlevel + ) +{ + HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); + u8 TxPwrLevel = 0; + int TxPwrDbm; + + // + // Because the Tx power indexes are different, we report the maximum of them to + // meet the CCX TPC request. By Bruce, 2008-01-31. + // + + // CCK + TxPwrLevel = pHalData->CurrentCckTxPwrIdx; + TxPwrDbm = phy_TxPwrIdxToDbm(Adapter, WIRELESS_MODE_B, TxPwrLevel); + + // Legacy OFDM + TxPwrLevel = pHalData->CurrentOfdm24GTxPwrIdx + pHalData->LegacyHTTxPowerDiff; + + // Compare with Legacy OFDM Tx power. + if(phy_TxPwrIdxToDbm(Adapter, WIRELESS_MODE_G, TxPwrLevel) > TxPwrDbm) + TxPwrDbm = phy_TxPwrIdxToDbm(Adapter, WIRELESS_MODE_G, TxPwrLevel); + + // HT OFDM + TxPwrLevel = pHalData->CurrentOfdm24GTxPwrIdx; + + // Compare with HT OFDM Tx power. + if(phy_TxPwrIdxToDbm(Adapter, WIRELESS_MODE_N_24G, TxPwrLevel) > TxPwrDbm) + TxPwrDbm = phy_TxPwrIdxToDbm(Adapter, WIRELESS_MODE_N_24G, TxPwrLevel); + + *powerlevel = TxPwrDbm; +} + + +static void getTxPowerIndex( + IN PADAPTER Adapter, + IN u8 channel, + IN OUT u8* cckPowerLevel, + IN OUT u8* ofdmPowerLevel + ) +{ + HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); + u8 index = (channel -1); + // 1. CCK + cckPowerLevel[RF_PATH_A] = pHalData->TxPwrLevelCck[RF_PATH_A][index]; //RF-A + cckPowerLevel[RF_PATH_B] = pHalData->TxPwrLevelCck[RF_PATH_B][index]; //RF-B + + // 2. OFDM for 1S or 2S + if (GET_RF_TYPE(Adapter) == RF_1T2R || GET_RF_TYPE(Adapter) == RF_1T1R) + { + // Read HT 40 OFDM TX power + ofdmPowerLevel[RF_PATH_A] = pHalData->TxPwrLevelHT40_1S[RF_PATH_A][index]; + ofdmPowerLevel[RF_PATH_B] = pHalData->TxPwrLevelHT40_1S[RF_PATH_B][index]; + } + else if (GET_RF_TYPE(Adapter) == RF_2T2R) + { + // Read HT 40 OFDM TX power + ofdmPowerLevel[RF_PATH_A] = pHalData->TxPwrLevelHT40_2S[RF_PATH_A][index]; + ofdmPowerLevel[RF_PATH_B] = pHalData->TxPwrLevelHT40_2S[RF_PATH_B][index]; + } + //RTPRINT(FPHY, PHY_TXPWR, ("Channel-%d, set tx power index !!\n", channel)); +} + +static void ccxPowerIndexCheck( + IN PADAPTER Adapter, + IN u8 channel, + IN OUT u8* cckPowerLevel, + IN OUT u8* ofdmPowerLevel + ) +{ +#if 0 + PMGNT_INFO pMgntInfo = &(Adapter->MgntInfo); + HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); + PRT_CCX_INFO pCcxInfo = GET_CCX_INFO(pMgntInfo); + + // + // CCX 2 S31, AP control of client transmit power: + // 1. We shall not exceed Cell Power Limit as possible as we can. + // 2. Tolerance is +/- 5dB. + // 3. 802.11h Power Contraint takes higher precedence over CCX Cell Power Limit. + // + // TODO: + // 1. 802.11h power contraint + // + // 071011, by rcnjko. + // + if( pMgntInfo->OpMode == RT_OP_MODE_INFRASTRUCTURE && + pMgntInfo->mAssoc && + pCcxInfo->bUpdateCcxPwr && + pCcxInfo->bWithCcxCellPwr && + channel == pMgntInfo->dot11CurrentChannelNumber) + { + u1Byte CckCellPwrIdx = phy_DbmToTxPwrIdx(Adapter, WIRELESS_MODE_B, pCcxInfo->CcxCellPwr); + u1Byte LegacyOfdmCellPwrIdx = phy_DbmToTxPwrIdx(Adapter, WIRELESS_MODE_G, pCcxInfo->CcxCellPwr); + u1Byte OfdmCellPwrIdx = phy_DbmToTxPwrIdx(Adapter, WIRELESS_MODE_N_24G, pCcxInfo->CcxCellPwr); + + RT_TRACE(COMP_TXAGC, DBG_LOUD, + ("CCX Cell Limit: %d dbm => CCK Tx power index : %d, Legacy OFDM Tx power index : %d, OFDM Tx power index: %d\n", + pCcxInfo->CcxCellPwr, CckCellPwrIdx, LegacyOfdmCellPwrIdx, OfdmCellPwrIdx)); + RT_TRACE(COMP_TXAGC, DBG_LOUD, + ("EEPROM channel(%d) => CCK Tx power index: %d, Legacy OFDM Tx power index : %d, OFDM Tx power index: %d\n", + channel, cckPowerLevel[0], ofdmPowerLevel[0] + pHalData->LegacyHTTxPowerDiff, ofdmPowerLevel[0])); + + // CCK + if(cckPowerLevel[0] > CckCellPwrIdx) + cckPowerLevel[0] = CckCellPwrIdx; + // Legacy OFDM, HT OFDM + if(ofdmPowerLevel[0] + pHalData->LegacyHTTxPowerDiff > LegacyOfdmCellPwrIdx) + { + if((OfdmCellPwrIdx - pHalData->LegacyHTTxPowerDiff) > 0) + { + ofdmPowerLevel[0] = OfdmCellPwrIdx - pHalData->LegacyHTTxPowerDiff; + } + else + { + ofdmPowerLevel[0] = 0; + } + } + + RT_TRACE(COMP_TXAGC, DBG_LOUD, + ("Altered CCK Tx power index : %d, Legacy OFDM Tx power index: %d, OFDM Tx power index: %d\n", + cckPowerLevel[0], ofdmPowerLevel[0] + pHalData->LegacyHTTxPowerDiff, ofdmPowerLevel[0])); + } + + pHalData->CurrentCckTxPwrIdx = cckPowerLevel[0]; + pHalData->CurrentOfdm24GTxPwrIdx = ofdmPowerLevel[0]; + + RT_TRACE(COMP_TXAGC, DBG_LOUD, + ("PHY_SetTxPowerLevel8192S(): CCK Tx power index : %d, Legacy OFDM Tx power index: %d, OFDM Tx power index: %d\n", + cckPowerLevel[0], ofdmPowerLevel[0] + pHalData->LegacyHTTxPowerDiff, ofdmPowerLevel[0])); +#endif +} +/*----------------------------------------------------------------------------- + * Function: SetTxPowerLevel8190() + * + * Overview: This function is export to "HalCommon" moudule + * We must consider RF path later!!!!!!! + * + * Input: PADAPTER Adapter + * u1Byte channel + * + * Output: NONE + * + * Return: NONE + * 2008/11/04 MHC We remove EEPROM_93C56. + * We need to move CCX relative code to independet file. + * 2009/01/21 MHC Support new EEPROM format from SD3 requirement. + * + *---------------------------------------------------------------------------*/ +VOID +PHY_SetTxPowerLevel8192C( + IN PADAPTER Adapter, + IN u8 channel + ) +{ + HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); + u8 cckPowerLevel[2], ofdmPowerLevel[2]; // [0]:RF-A, [1]:RF-B + +#if(MP_DRIVER == 1) + return; +#endif + + if(pHalData->bTXPowerDataReadFromEEPORM == _FALSE) + return; + + getTxPowerIndex(Adapter, channel, &cckPowerLevel[0], &ofdmPowerLevel[0]); + //RTPRINT(FPHY, PHY_TXPWR, ("Channel-%d, cckPowerLevel (A / B) = 0x%x / 0x%x, ofdmPowerLevel (A / B) = 0x%x / 0x%x\n", + // channel, cckPowerLevel[0], cckPowerLevel[1], ofdmPowerLevel[0], ofdmPowerLevel[1])); + + ccxPowerIndexCheck(Adapter, channel, &cckPowerLevel[0], &ofdmPowerLevel[0]); + + rtl8192c_PHY_RF6052SetCckTxPower(Adapter, &cckPowerLevel[0]); + rtl8192c_PHY_RF6052SetOFDMTxPower(Adapter, &ofdmPowerLevel[0], channel); + +#if 0 + switch(pHalData->rf_chip) + { + case RF_8225: + PHY_SetRF8225CckTxPower(Adapter, cckPowerLevel[0]); + PHY_SetRF8225OfdmTxPower(Adapter, ofdmPowerLevel[0]); + break; + + case RF_8256: + PHY_SetRF8256CCKTxPower(Adapter, cckPowerLevel[0]); + PHY_SetRF8256OFDMTxPower(Adapter, ofdmPowerLevel[0]); + break; + + case RF_6052: + PHY_RF6052SetCckTxPower(Adapter, &cckPowerLevel[0]); + PHY_RF6052SetOFDMTxPower(Adapter, &ofdmPowerLevel[0], channel); + break; + + case RF_8258: + break; + } +#endif + +} + + +// +// Description: +// Update transmit power level of all channel supported. +// +// TODO: +// A mode. +// By Bruce, 2008-02-04. +// +BOOLEAN +PHY_UpdateTxPowerDbm8192C( + IN PADAPTER Adapter, + IN int powerInDbm + ) +{ + HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); + u8 idx; + u8 rf_path; + + // TODO: A mode Tx power. + u8 CckTxPwrIdx = phy_DbmToTxPwrIdx(Adapter, WIRELESS_MODE_B, powerInDbm); + u8 OfdmTxPwrIdx = phy_DbmToTxPwrIdx(Adapter, WIRELESS_MODE_N_24G, powerInDbm); + + if(OfdmTxPwrIdx - pHalData->LegacyHTTxPowerDiff > 0) + OfdmTxPwrIdx -= pHalData->LegacyHTTxPowerDiff; + else + OfdmTxPwrIdx = 0; + + //RT_TRACE(COMP_TXAGC, DBG_LOUD, ("PHY_UpdateTxPowerDbm8192S(): %ld dBm , CckTxPwrIdx = %d, OfdmTxPwrIdx = %d\n", powerInDbm, CckTxPwrIdx, OfdmTxPwrIdx)); + + for(idx = 0; idx < 14; idx++) + { + for (rf_path = 0; rf_path < 2; rf_path++) + { + pHalData->TxPwrLevelCck[rf_path][idx] = CckTxPwrIdx; + pHalData->TxPwrLevelHT40_1S[rf_path][idx] = + pHalData->TxPwrLevelHT40_2S[rf_path][idx] = OfdmTxPwrIdx; + } + } + + //Adapter->HalFunc.SetTxPowerLevelHandler(Adapter, pHalData->CurrentChannel);//gtest:todo + + return _TRUE; +} + + +/* + Description: + When beacon interval is changed, the values of the + hw registers should be modified. + By tynli, 2008.10.24. + +*/ + + +void +rtl8192c_PHY_SetBeaconHwReg( + IN PADAPTER Adapter, + IN u16 BeaconInterval + ) +{ + +} + + +VOID +PHY_ScanOperationBackup8192C( + IN PADAPTER Adapter, + IN u8 Operation + ) +{ +#if 0 + IO_TYPE IoType; + + if(!Adapter->bDriverStopped) + { + switch(Operation) + { + case SCAN_OPT_BACKUP: + IoType = IO_CMD_PAUSE_DM_BY_SCAN; + rtw_hal_set_hwreg(Adapter,HW_VAR_IO_CMD, (pu1Byte)&IoType); + + break; + + case SCAN_OPT_RESTORE: + IoType = IO_CMD_RESUME_DM_BY_SCAN; + rtw_hal_set_hwreg(Adapter,HW_VAR_IO_CMD, (pu1Byte)&IoType); + break; + + default: + RT_TRACE(COMP_SCAN, DBG_LOUD, ("Unknown Scan Backup Operation. \n")); + break; + } + } +#endif +} + +/*----------------------------------------------------------------------------- + * Function: PHY_SetBWModeCallback8192C() + * + * Overview: Timer callback function for SetSetBWMode + * + * Input: PRT_TIMER pTimer + * + * Output: NONE + * + * Return: NONE + * + * Note: (1) We do not take j mode into consideration now + * (2) Will two workitem of "switch channel" and "switch channel bandwidth" run + * concurrently? + *---------------------------------------------------------------------------*/ +static VOID +_PHY_SetBWMode92C( + IN PADAPTER Adapter +) +{ +// PADAPTER Adapter = (PADAPTER)pTimer->Adapter; + HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); + u8 regBwOpMode; + u8 regRRSR_RSC; + + //return; + + // Added it for 20/40 mhz switch time evaluation by guangan 070531 + //u4Byte NowL, NowH; + //u8Byte BeginTime, EndTime; + + /*RT_TRACE(COMP_SCAN, DBG_LOUD, ("==>PHY_SetBWModeCallback8192C() Switch to %s bandwidth\n", \ + pHalData->CurrentChannelBW == HT_CHANNEL_WIDTH_20?"20MHz":"40MHz"))*/ + + if(pHalData->rf_chip == RF_PSEUDO_11N) + { + //pHalData->SetBWModeInProgress= _FALSE; + return; + } + + // There is no 40MHz mode in RF_8225. + if(pHalData->rf_chip==RF_8225) + return; + + if(Adapter->bDriverStopped) + return; + + // Added it for 20/40 mhz switch time evaluation by guangan 070531 + //NowL = PlatformEFIORead4Byte(Adapter, TSFR); + //NowH = PlatformEFIORead4Byte(Adapter, TSFR+4); + //BeginTime = ((u8Byte)NowH << 32) + NowL; + + //3// + //3//<1>Set MAC register + //3// + //Adapter->HalFunc.SetBWModeHandler(); + + regBwOpMode = rtw_read8(Adapter, REG_BWOPMODE); + regRRSR_RSC = rtw_read8(Adapter, REG_RRSR+2); + //regBwOpMode = rtw_hal_get_hwreg(Adapter,HW_VAR_BWMODE,(pu1Byte)®BwOpMode); + + switch(pHalData->CurrentChannelBW) + { + case HT_CHANNEL_WIDTH_20: + regBwOpMode |= BW_OPMODE_20MHZ; + // 2007/02/07 Mark by Emily becasue we have not verify whether this register works + rtw_write8(Adapter, REG_BWOPMODE, regBwOpMode); + break; + + case HT_CHANNEL_WIDTH_40: + regBwOpMode &= ~BW_OPMODE_20MHZ; + // 2007/02/07 Mark by Emily becasue we have not verify whether this register works + rtw_write8(Adapter, REG_BWOPMODE, regBwOpMode); + + regRRSR_RSC = (regRRSR_RSC&0x90) |(pHalData->nCur40MhzPrimeSC<<5); + rtw_write8(Adapter, REG_RRSR+2, regRRSR_RSC); + break; + + default: + /*RT_TRACE(COMP_DBG, DBG_LOUD, ("PHY_SetBWModeCallback8192C(): + unknown Bandwidth: %#X\n",pHalData->CurrentChannelBW));*/ + break; + } + + //3// + //3//<2>Set PHY related register + //3// + switch(pHalData->CurrentChannelBW) + { + /* 20 MHz channel*/ + case HT_CHANNEL_WIDTH_20: + PHY_SetBBReg(Adapter, rFPGA0_RFMOD, bRFMOD, 0x0); + PHY_SetBBReg(Adapter, rFPGA1_RFMOD, bRFMOD, 0x0); + PHY_SetBBReg(Adapter, rFPGA0_AnalogParameter2, BIT10, 1); + + break; + + + /* 40 MHz channel*/ + case HT_CHANNEL_WIDTH_40: + PHY_SetBBReg(Adapter, rFPGA0_RFMOD, bRFMOD, 0x1); + PHY_SetBBReg(Adapter, rFPGA1_RFMOD, bRFMOD, 0x1); + + // Set Control channel to upper or lower. These settings are required only for 40MHz + PHY_SetBBReg(Adapter, rCCK0_System, bCCKSideBand, (pHalData->nCur40MhzPrimeSC>>1)); + PHY_SetBBReg(Adapter, rOFDM1_LSTF, 0xC00, pHalData->nCur40MhzPrimeSC); + PHY_SetBBReg(Adapter, rFPGA0_AnalogParameter2, BIT10, 0); + + PHY_SetBBReg(Adapter, 0x818, (BIT26|BIT27), (pHalData->nCur40MhzPrimeSC==HAL_PRIME_CHNL_OFFSET_LOWER)?2:1); + + break; + + + + default: + /*RT_TRACE(COMP_DBG, DBG_LOUD, ("PHY_SetBWModeCallback8192C(): unknown Bandwidth: %#X\n"\ + ,pHalData->CurrentChannelBW));*/ + break; + + } + //Skip over setting of J-mode in BB register here. Default value is "None J mode". Emily 20070315 + + // Added it for 20/40 mhz switch time evaluation by guangan 070531 + //NowL = PlatformEFIORead4Byte(Adapter, TSFR); + //NowH = PlatformEFIORead4Byte(Adapter, TSFR+4); + //EndTime = ((u8Byte)NowH << 32) + NowL; + //RT_TRACE(COMP_SCAN, DBG_LOUD, ("SetBWModeCallback8190Pci: time of SetBWMode = %I64d us!\n", (EndTime - BeginTime))); + + //3<3>Set RF related register + switch(pHalData->rf_chip) + { + case RF_8225: + //PHY_SetRF8225Bandwidth(Adapter, pHalData->CurrentChannelBW); + break; + + case RF_8256: + // Please implement this function in Hal8190PciPhy8256.c + //PHY_SetRF8256Bandwidth(Adapter, pHalData->CurrentChannelBW); + break; + + case RF_8258: + // Please implement this function in Hal8190PciPhy8258.c + // PHY_SetRF8258Bandwidth(); + break; + + case RF_PSEUDO_11N: + // Do Nothing + break; + + case RF_6052: + rtl8192c_PHY_RF6052SetBandwidth(Adapter, pHalData->CurrentChannelBW); + break; + + default: + //RT_ASSERT(FALSE, ("Unknown RFChipID: %d\n", pHalData->RFChipID)); + break; + } + + //pHalData->SetBWModeInProgress= FALSE; + + //RT_TRACE(COMP_SCAN, DBG_LOUD, ("<==PHY_SetBWModeCallback8192C() \n" )); +} + + + /*----------------------------------------------------------------------------- + * Function: SetBWMode8190Pci() + * + * Overview: This function is export to "HalCommon" moudule + * + * Input: PADAPTER Adapter + * HT_CHANNEL_WIDTH Bandwidth //20M or 40M + * + * Output: NONE + * + * Return: NONE + * + * Note: We do not take j mode into consideration now + *---------------------------------------------------------------------------*/ +VOID +PHY_SetBWMode8192C( + IN PADAPTER Adapter, + IN HT_CHANNEL_WIDTH Bandwidth, // 20M or 40M + IN unsigned char Offset // Upper, Lower, or Don't care +) +{ + HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); + HT_CHANNEL_WIDTH tmpBW= pHalData->CurrentChannelBW; + // Modified it for 20/40 mhz switch by guangan 070531 + //PMGNT_INFO pMgntInfo=&Adapter->MgntInfo; + + //return; + + //if(pHalData->SwChnlInProgress) +// if(pMgntInfo->bScanInProgress) +// { +// RT_TRACE(COMP_SCAN, DBG_LOUD, ("PHY_SetBWMode8192C() %s Exit because bScanInProgress!\n", +// Bandwidth == HT_CHANNEL_WIDTH_20?"20MHz":"40MHz")); +// return; +// } + +// if(pHalData->SetBWModeInProgress) +// { +// // Modified it for 20/40 mhz switch by guangan 070531 +// RT_TRACE(COMP_SCAN, DBG_LOUD, ("PHY_SetBWMode8192C() %s cancel last timer because SetBWModeInProgress!\n", +// Bandwidth == HT_CHANNEL_WIDTH_20?"20MHz":"40MHz")); +// PlatformCancelTimer(Adapter, &pHalData->SetBWModeTimer); +// //return; +// } + + //if(pHalData->SetBWModeInProgress) + // return; + + //pHalData->SetBWModeInProgress= TRUE; + + pHalData->CurrentChannelBW = Bandwidth; + +#if 0 + if(Offset==HT_EXTCHNL_OFFSET_LOWER) + pHalData->nCur40MhzPrimeSC = HAL_PRIME_CHNL_OFFSET_UPPER; + else if(Offset==HT_EXTCHNL_OFFSET_UPPER) + pHalData->nCur40MhzPrimeSC = HAL_PRIME_CHNL_OFFSET_LOWER; + else + pHalData->nCur40MhzPrimeSC = HAL_PRIME_CHNL_OFFSET_DONT_CARE; +#else + pHalData->nCur40MhzPrimeSC = Offset; +#endif + + if((!Adapter->bDriverStopped) && (!Adapter->bSurpriseRemoved)) + { +#ifdef USE_WORKITEM + //PlatformScheduleWorkItem(&(pHalData->SetBWModeWorkItem)); +#else + #if 0 + //PlatformSetTimer(Adapter, &(pHalData->SetBWModeTimer), 0); + #else + _PHY_SetBWMode92C(Adapter); + #endif +#endif + } + else + { + //RT_TRACE(COMP_SCAN, DBG_LOUD, ("PHY_SetBWMode8192C() SetBWModeInProgress FALSE driver sleep or unload\n")); + //pHalData->SetBWModeInProgress= FALSE; + pHalData->CurrentChannelBW = tmpBW; + } + +} + + +static void _PHY_SwChnl8192C(PADAPTER Adapter, u8 channel) +{ + u8 eRFPath; + u32 param1, param2; + HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); + + if ( Adapter->bNotifyChannelChange ) + { + DBG_871X( "[%s] ch = %d\n", __FUNCTION__, channel ); + } + + //s1. pre common command - CmdID_SetTxPowerLevel + PHY_SetTxPowerLevel8192C(Adapter, channel); + + //s2. RF dependent command - CmdID_RF_WriteReg, param1=RF_CHNLBW, param2=channel + param1 = RF_CHNLBW; + param2 = channel; + for(eRFPath = 0; eRFPath <pHalData->NumTotalRFPath; eRFPath++) + { + pHalData->RfRegChnlVal[eRFPath] = ((pHalData->RfRegChnlVal[eRFPath] & 0xfffffc00) | param2); + PHY_SetRFReg(Adapter, (RF_RADIO_PATH_E)eRFPath, param1, bRFRegOffsetMask, pHalData->RfRegChnlVal[eRFPath]); + } + + + //s3. post common command - CmdID_End, None + +} + +VOID +PHY_SwChnl8192C( // Call after initialization + IN PADAPTER Adapter, + IN u8 channel + ) +{ + //PADAPTER Adapter = ADJUST_TO_ADAPTIVE_ADAPTER(pAdapter, _TRUE); + HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); + u8 tmpchannel = pHalData->CurrentChannel; + BOOLEAN bResult = _TRUE; + + if(pHalData->rf_chip == RF_PSEUDO_11N) + { + //pHalData->SwChnlInProgress=FALSE; + return; //return immediately if it is peudo-phy + } + + //if(pHalData->SwChnlInProgress) + // return; + + //if(pHalData->SetBWModeInProgress) + // return; + + //-------------------------------------------- + switch(pHalData->CurrentWirelessMode) + { + case WIRELESS_MODE_A: + case WIRELESS_MODE_N_5G: + //RT_ASSERT((channel>14), ("WIRELESS_MODE_A but channel<=14")); + break; + + case WIRELESS_MODE_B: + //RT_ASSERT((channel<=14), ("WIRELESS_MODE_B but channel>14")); + break; + + case WIRELESS_MODE_G: + case WIRELESS_MODE_N_24G: + //RT_ASSERT((channel<=14), ("WIRELESS_MODE_G but channel>14")); + break; + + default: + //RT_ASSERT(FALSE, ("Invalid WirelessMode(%#x)!!\n", pHalData->CurrentWirelessMode)); + break; + } + //-------------------------------------------- + + //pHalData->SwChnlInProgress = TRUE; + if(channel == 0) + channel = 1; + + pHalData->CurrentChannel=channel; + + //pHalData->SwChnlStage=0; + //pHalData->SwChnlStep=0; + + if((!Adapter->bDriverStopped) && (!Adapter->bSurpriseRemoved)) + { +#ifdef USE_WORKITEM + //bResult = PlatformScheduleWorkItem(&(pHalData->SwChnlWorkItem)); +#else + #if 0 + //PlatformSetTimer(Adapter, &(pHalData->SwChnlTimer), 0); + #else + _PHY_SwChnl8192C(Adapter, channel); + #endif +#endif + if(bResult) + { + //RT_TRACE(COMP_SCAN, DBG_LOUD, ("PHY_SwChnl8192C SwChnlInProgress TRUE schdule workitem done\n")); + } + else + { + //RT_TRACE(COMP_SCAN, DBG_LOUD, ("PHY_SwChnl8192C SwChnlInProgress FALSE schdule workitem error\n")); + //if(IS_HARDWARE_TYPE_8192SU(Adapter)) + //{ + // pHalData->SwChnlInProgress = FALSE; + pHalData->CurrentChannel = tmpchannel; + //} + } + + } + else + { + //RT_TRACE(COMP_SCAN, DBG_LOUD, ("PHY_SwChnl8192C SwChnlInProgress FALSE driver sleep or unload\n")); + //if(IS_HARDWARE_TYPE_8192SU(Adapter)) + //{ + // pHalData->SwChnlInProgress = FALSE; + pHalData->CurrentChannel = tmpchannel; + //} + } +} + + +static BOOLEAN +phy_SwChnlStepByStep( + IN PADAPTER Adapter, + IN u8 channel, + IN u8 *stage, + IN u8 *step, + OUT u32 *delay + ) +{ +#if 0 + HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); + PCHANNEL_ACCESS_SETTING pChnlAccessSetting; + SwChnlCmd PreCommonCmd[MAX_PRECMD_CNT]; + u4Byte PreCommonCmdCnt; + SwChnlCmd PostCommonCmd[MAX_POSTCMD_CNT]; + u4Byte PostCommonCmdCnt; + SwChnlCmd RfDependCmd[MAX_RFDEPENDCMD_CNT]; + u4Byte RfDependCmdCnt; + SwChnlCmd *CurrentCmd; + u1Byte eRFPath; + u4Byte RfTXPowerCtrl; + BOOLEAN bAdjRfTXPowerCtrl = _FALSE; + + + RT_ASSERT((Adapter != NULL), ("Adapter should not be NULL\n")); +#if(MP_DRIVER != 1) + RT_ASSERT(IsLegalChannel(Adapter, channel), ("illegal channel: %d\n", channel)); +#endif + RT_ASSERT((pHalData != NULL), ("pHalData should not be NULL\n")); + + pChnlAccessSetting = &Adapter->MgntInfo.Info8185.ChannelAccessSetting; + RT_ASSERT((pChnlAccessSetting != NULL), ("pChnlAccessSetting should not be NULL\n")); + + //for(eRFPath = RF_PATH_A; eRFPath <pHalData->NumTotalRFPath; eRFPath++) + //for(eRFPath = 0; eRFPath <pHalData->NumTotalRFPath; eRFPath++) + //{ + // <1> Fill up pre common command. + PreCommonCmdCnt = 0; + phy_SetSwChnlCmdArray(PreCommonCmd, PreCommonCmdCnt++, MAX_PRECMD_CNT, + CmdID_SetTxPowerLevel, 0, 0, 0); + phy_SetSwChnlCmdArray(PreCommonCmd, PreCommonCmdCnt++, MAX_PRECMD_CNT, + CmdID_End, 0, 0, 0); + + // <2> Fill up post common command. + PostCommonCmdCnt = 0; + + phy_SetSwChnlCmdArray(PostCommonCmd, PostCommonCmdCnt++, MAX_POSTCMD_CNT, + CmdID_End, 0, 0, 0); + + // <3> Fill up RF dependent command. + RfDependCmdCnt = 0; + switch( pHalData->RFChipID ) + { + case RF_8225: + RT_ASSERT((channel >= 1 && channel <= 14), ("illegal channel for Zebra: %d\n", channel)); + // 2008/09/04 MH Change channel. + if(channel==14) channel++; + phy_SetSwChnlCmdArray(RfDependCmd, RfDependCmdCnt++, MAX_RFDEPENDCMD_CNT, + CmdID_RF_WriteReg, rZebra1_Channel, (0x10+channel-1), 10); + phy_SetSwChnlCmdArray(RfDependCmd, RfDependCmdCnt++, MAX_RFDEPENDCMD_CNT, + CmdID_End, 0, 0, 0); + break; + + case RF_8256: + // TEST!! This is not the table for 8256!! + RT_ASSERT((channel >= 1 && channel <= 14), ("illegal channel for Zebra: %d\n", channel)); + phy_SetSwChnlCmdArray(RfDependCmd, RfDependCmdCnt++, MAX_RFDEPENDCMD_CNT, + CmdID_RF_WriteReg, rRfChannel, channel, 10); + phy_SetSwChnlCmdArray(RfDependCmd, RfDependCmdCnt++, MAX_RFDEPENDCMD_CNT, + CmdID_End, 0, 0, 0); + break; + + case RF_6052: + RT_ASSERT((channel >= 1 && channel <= 14), ("illegal channel for Zebra: %d\n", channel)); + phy_SetSwChnlCmdArray(RfDependCmd, RfDependCmdCnt++, MAX_RFDEPENDCMD_CNT, + CmdID_RF_WriteReg, RF_CHNLBW, channel, 10); + phy_SetSwChnlCmdArray(RfDependCmd, RfDependCmdCnt++, MAX_RFDEPENDCMD_CNT, + CmdID_End, 0, 0, 0); + + break; + + case RF_8258: + break; + + // For FPGA two MAC verification + case RF_PSEUDO_11N: + return TRUE; + default: + RT_ASSERT(FALSE, ("Unknown RFChipID: %d\n", pHalData->RFChipID)); + return FALSE; + break; + } + + + do{ + switch(*stage) + { + case 0: + CurrentCmd=&PreCommonCmd[*step]; + break; + case 1: + CurrentCmd=&RfDependCmd[*step]; + break; + case 2: + CurrentCmd=&PostCommonCmd[*step]; + break; + } + + if(CurrentCmd->CmdID==CmdID_End) + { + if((*stage)==2) + { + return TRUE; + } + else + { + (*stage)++; + (*step)=0; + continue; + } + } + + switch(CurrentCmd->CmdID) + { + case CmdID_SetTxPowerLevel: + PHY_SetTxPowerLevel8192C(Adapter,channel); + break; + case CmdID_WritePortUlong: + PlatformEFIOWrite4Byte(Adapter, CurrentCmd->Para1, CurrentCmd->Para2); + break; + case CmdID_WritePortUshort: + PlatformEFIOWrite2Byte(Adapter, CurrentCmd->Para1, (u2Byte)CurrentCmd->Para2); + break; + case CmdID_WritePortUchar: + PlatformEFIOWrite1Byte(Adapter, CurrentCmd->Para1, (u1Byte)CurrentCmd->Para2); + break; + case CmdID_RF_WriteReg: // Only modify channel for the register now !!!!! + for(eRFPath = 0; eRFPath <pHalData->NumTotalRFPath; eRFPath++) + { +#if 1 + pHalData->RfRegChnlVal[eRFPath] = ((pHalData->RfRegChnlVal[eRFPath] & 0xfffffc00) | CurrentCmd->Para2); + PHY_SetRFReg(Adapter, (RF_RADIO_PATH_E)eRFPath, CurrentCmd->Para1, bRFRegOffsetMask, pHalData->RfRegChnlVal[eRFPath]); +#else + PHY_SetRFReg(Adapter, (RF_RADIO_PATH_E)eRFPath, CurrentCmd->Para1, bRFRegOffsetMask, (CurrentCmd->Para2)); +#endif + } + break; + } + + break; + }while(TRUE); + //cosa }/*for(Number of RF paths)*/ + + (*delay)=CurrentCmd->msDelay; + (*step)++; + return FALSE; +#endif + return _TRUE; +} + + +static BOOLEAN +phy_SetSwChnlCmdArray( + SwChnlCmd* CmdTable, + u32 CmdTableIdx, + u32 CmdTableSz, + SwChnlCmdID CmdID, + u32 Para1, + u32 Para2, + u32 msDelay + ) +{ + SwChnlCmd* pCmd; + + if(CmdTable == NULL) + { + //RT_ASSERT(FALSE, ("phy_SetSwChnlCmdArray(): CmdTable cannot be NULL.\n")); + return _FALSE; + } + if(CmdTableIdx >= CmdTableSz) + { + //RT_ASSERT(FALSE, + // ("phy_SetSwChnlCmdArray(): Access invalid index, please check size of the table, CmdTableIdx:%ld, CmdTableSz:%ld\n", + // CmdTableIdx, CmdTableSz)); + return _FALSE; + } + + pCmd = CmdTable + CmdTableIdx; + pCmd->CmdID = CmdID; + pCmd->Para1 = Para1; + pCmd->Para2 = Para2; + pCmd->msDelay = msDelay; + + return _TRUE; +} + + +static void +phy_FinishSwChnlNow( // We should not call this function directly + IN PADAPTER Adapter, + IN u8 channel + ) +{ +#if 0 + HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); + u32 delay; + + while(!phy_SwChnlStepByStep(Adapter,channel,&pHalData->SwChnlStage,&pHalData->SwChnlStep,&delay)) + { + if(delay>0) + rtw_mdelay_os(delay); + } +#endif +} + + + +// +// Description: +// Switch channel synchronously. Called by SwChnlByDelayHandler. +// +// Implemented by Bruce, 2008-02-14. +// The following procedure is operted according to SwChanlCallback8190Pci(). +// However, this procedure is performed synchronously which should be running under +// passive level. +// +VOID +PHY_SwChnlPhy8192C( // Only called during initialize + IN PADAPTER Adapter, + IN u8 channel + ) +{ + HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); + + //RT_TRACE(COMP_SCAN | COMP_RM, DBG_LOUD, ("==>PHY_SwChnlPhy8192S(), switch from channel %d to channel %d.\n", pHalData->CurrentChannel, channel)); + + // Cannot IO. + //if(RT_CANNOT_IO(Adapter)) + // return; + + // Channel Switching is in progress. + //if(pHalData->SwChnlInProgress) + // return; + + //return immediately if it is peudo-phy + if(pHalData->rf_chip == RF_PSEUDO_11N) + { + //pHalData->SwChnlInProgress=FALSE; + return; + } + + //pHalData->SwChnlInProgress = TRUE; + if( channel == 0) + channel = 1; + + pHalData->CurrentChannel=channel; + + //pHalData->SwChnlStage = 0; + //pHalData->SwChnlStep = 0; + + phy_FinishSwChnlNow(Adapter,channel); + + //pHalData->SwChnlInProgress = FALSE; +} + + +// +// Description: +// Configure H/W functionality to enable/disable Monitor mode. +// Note, because we possibly need to configure BB and RF in this function, +// so caller should in PASSIVE_LEVEL. 080118, by rcnjko. +// +VOID +PHY_SetMonitorMode8192C( + IN PADAPTER pAdapter, + IN BOOLEAN bEnableMonitorMode + ) +{ +#if 0 + HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter); + BOOLEAN bFilterOutNonAssociatedBSSID = FALSE; + + //2 Note: we may need to stop antenna diversity. + if(bEnableMonitorMode) + { + bFilterOutNonAssociatedBSSID = FALSE; + RT_TRACE(COMP_RM, DBG_LOUD, ("PHY_SetMonitorMode8192S(): enable monitor mode\n")); + + pHalData->bInMonitorMode = TRUE; + pAdapter->HalFunc.AllowAllDestAddrHandler(pAdapter, TRUE, TRUE); + rtw_hal_set_hwreg(pAdapter, HW_VAR_CHECK_BSSID, (pu1Byte)&bFilterOutNonAssociatedBSSID); + } + else + { + bFilterOutNonAssociatedBSSID = TRUE; + RT_TRACE(COMP_RM, DBG_LOUD, ("PHY_SetMonitorMode8192S(): disable monitor mode\n")); + + pAdapter->HalFunc.AllowAllDestAddrHandler(pAdapter, FALSE, TRUE); + pHalData->bInMonitorMode = FALSE; + rtw_hal_set_hwreg(pAdapter, HW_VAR_CHECK_BSSID, (pu1Byte)&bFilterOutNonAssociatedBSSID); + } +#endif +} + + +/*----------------------------------------------------------------------------- + * Function: PHYCheckIsLegalRfPath8190Pci() + * + * Overview: Check different RF type to execute legal judgement. If RF Path is illegal + * We will return false. + * + * Input: NONE + * + * Output: NONE + * + * Return: NONE + * + * Revised History: + * When Who Remark + * 11/15/2007 MHC Create Version 0. + * + *---------------------------------------------------------------------------*/ +BOOLEAN +PHY_CheckIsLegalRfPath8192C( + IN PADAPTER pAdapter, + IN u32 eRFPath) +{ +// HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter); + BOOLEAN rtValue = _TRUE; + + // NOt check RF Path now.! +#if 0 + if (pHalData->RF_Type == RF_1T2R && eRFPath != RF_PATH_A) + { + rtValue = FALSE; + } + if (pHalData->RF_Type == RF_1T2R && eRFPath != RF_PATH_A) + { + + } +#endif + return rtValue; + +} /* PHY_CheckIsLegalRfPath8192C */ + +//------------------------------------------------------------------------- +// +// IQK +// +//------------------------------------------------------------------------- +#define MAX_TOLERANCE 5 +#define IQK_DELAY_TIME 1 //ms + +static u8 //bit0 = 1 => Tx OK, bit1 = 1 => Rx OK +_PHY_PathA_IQK( + IN PADAPTER pAdapter, + IN BOOLEAN configPathB + ) +{ + u32 regEAC, regE94, regE9C, regEA4; + u8 result = 0x00; + HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter); + + //RTPRINT(FINIT, INIT_IQK, ("Path A IQK!\n")); + + //path-A IQK setting + //RTPRINT(FINIT, INIT_IQK, ("Path-A IQK setting!\n")); + PHY_SetBBReg(pAdapter, rTx_IQK_Tone_A, bMaskDWord, 0x10008c1f); + PHY_SetBBReg(pAdapter, rRx_IQK_Tone_A, bMaskDWord, 0x10008c1f); + PHY_SetBBReg(pAdapter, rTx_IQK_PI_A, bMaskDWord, 0x82140102); + + PHY_SetBBReg(pAdapter, rRx_IQK_PI_A, bMaskDWord, configPathB ? 0x28160202 : + IS_81xxC_VENDOR_UMC_B_CUT(pHalData->VersionID)?0x28160202:0x28160502); + + //path-B IQK setting + if(configPathB) + { + PHY_SetBBReg(pAdapter, rTx_IQK_Tone_B, bMaskDWord, 0x10008c22); + PHY_SetBBReg(pAdapter, rRx_IQK_Tone_B, bMaskDWord, 0x10008c22); + PHY_SetBBReg(pAdapter, rTx_IQK_PI_B, bMaskDWord, 0x82140102); + PHY_SetBBReg(pAdapter, rRx_IQK_PI_B, bMaskDWord, 0x28160202); + } + + //LO calibration setting + //RTPRINT(FINIT, INIT_IQK, ("LO calibration setting!\n")); + PHY_SetBBReg(pAdapter, rIQK_AGC_Rsp, bMaskDWord, 0x001028d1); + + //One shot, path A LOK & IQK + //RTPRINT(FINIT, INIT_IQK, ("One shot, path A LOK & IQK!\n")); + PHY_SetBBReg(pAdapter, rIQK_AGC_Pts, bMaskDWord, 0xf9000000); + PHY_SetBBReg(pAdapter, rIQK_AGC_Pts, bMaskDWord, 0xf8000000); + + // delay x ms + //RTPRINT(FINIT, INIT_IQK, ("Delay %d ms for One shot, path A LOK & IQK.\n", IQK_DELAY_TIME)); + rtw_udelay_os(IQK_DELAY_TIME*1000);//PlatformStallExecution(IQK_DELAY_TIME*1000); + + // Check failed + regEAC = PHY_QueryBBReg(pAdapter, rRx_Power_After_IQK_A_2, bMaskDWord); + //RTPRINT(FINIT, INIT_IQK, ("0xeac = 0x%x\n", regEAC)); + regE94 = PHY_QueryBBReg(pAdapter, rTx_Power_Before_IQK_A, bMaskDWord); + //RTPRINT(FINIT, INIT_IQK, ("0xe94 = 0x%x\n", regE94)); + regE9C= PHY_QueryBBReg(pAdapter, rTx_Power_After_IQK_A, bMaskDWord); + //RTPRINT(FINIT, INIT_IQK, ("0xe9c = 0x%x\n", regE9C)); + regEA4= PHY_QueryBBReg(pAdapter, rRx_Power_Before_IQK_A_2, bMaskDWord); + //RTPRINT(FINIT, INIT_IQK, ("0xea4 = 0x%x\n", regEA4)); + + if(!(regEAC & BIT28) && + (((regE94 & 0x03FF0000)>>16) != 0x142) && + (((regE9C & 0x03FF0000)>>16) != 0x42) ) + result |= 0x01; + else //if Tx not OK, ignore Rx + return result; + + if(!(regEAC & BIT27) && //if Tx is OK, check whether Rx is OK + (((regEA4 & 0x03FF0000)>>16) != 0x132) && + (((regEAC & 0x03FF0000)>>16) != 0x36)) + result |= 0x02; + else + DBG_8192C("Path A Rx IQK fail!!\n"); + + return result; + + +} + +static u8 //bit0 = 1 => Tx OK, bit1 = 1 => Rx OK +_PHY_PathB_IQK( + IN PADAPTER pAdapter + ) +{ + u32 regEAC, regEB4, regEBC, regEC4, regECC; + u8 result = 0x00; + //RTPRINT(FINIT, INIT_IQK, ("Path B IQK!\n")); + + //One shot, path B LOK & IQK + //RTPRINT(FINIT, INIT_IQK, ("One shot, path A LOK & IQK!\n")); + PHY_SetBBReg(pAdapter, rIQK_AGC_Cont, bMaskDWord, 0x00000002); + PHY_SetBBReg(pAdapter, rIQK_AGC_Cont, bMaskDWord, 0x00000000); + + // delay x ms + //RTPRINT(FINIT, INIT_IQK, ("Delay %d ms for One shot, path B LOK & IQK.\n", IQK_DELAY_TIME)); + rtw_udelay_os(IQK_DELAY_TIME*1000);//PlatformStallExecution(IQK_DELAY_TIME*1000); + + // Check failed + regEAC = PHY_QueryBBReg(pAdapter, rRx_Power_After_IQK_A_2, bMaskDWord); + //RTPRINT(FINIT, INIT_IQK, ("0xeac = 0x%x\n", regEAC)); + regEB4 = PHY_QueryBBReg(pAdapter, rTx_Power_Before_IQK_B, bMaskDWord); + //RTPRINT(FINIT, INIT_IQK, ("0xeb4 = 0x%x\n", regEB4)); + regEBC= PHY_QueryBBReg(pAdapter, rTx_Power_After_IQK_B, bMaskDWord); + //RTPRINT(FINIT, INIT_IQK, ("0xebc = 0x%x\n", regEBC)); + regEC4= PHY_QueryBBReg(pAdapter, rRx_Power_Before_IQK_B_2, bMaskDWord); + //RTPRINT(FINIT, INIT_IQK, ("0xec4 = 0x%x\n", regEC4)); + regECC= PHY_QueryBBReg(pAdapter, rRx_Power_After_IQK_B_2, bMaskDWord); + //RTPRINT(FINIT, INIT_IQK, ("0xecc = 0x%x\n", regECC)); + + if(!(regEAC & BIT31) && + (((regEB4 & 0x03FF0000)>>16) != 0x142) && + (((regEBC & 0x03FF0000)>>16) != 0x42)) + result |= 0x01; + else + return result; + + if(!(regEAC & BIT30) && + (((regEC4 & 0x03FF0000)>>16) != 0x132) && + (((regECC & 0x03FF0000)>>16) != 0x36)) + result |= 0x02; + else + DBG_8192C("Path B Rx IQK fail!!\n"); + + + return result; + +} + +static VOID +_PHY_PathAFillIQKMatrix( + IN PADAPTER pAdapter, + IN BOOLEAN bIQKOK, + IN int result[][8], + IN u8 final_candidate, + IN BOOLEAN bTxOnly + ) +{ + u32 Oldval_0, X, TX0_A, reg; + s32 Y, TX0_C; + + DBG_8192C("Path A IQ Calibration %s !\n",(bIQKOK)?"Success":"Failed"); + + if(final_candidate == 0xFF) + return; + else if(bIQKOK) + { + Oldval_0 = (PHY_QueryBBReg(pAdapter, rOFDM0_XATxIQImbalance, bMaskDWord) >> 22) & 0x3FF; + + X = result[final_candidate][0]; + if ((X & 0x00000200) != 0) + X = X | 0xFFFFFC00; + TX0_A = (X * Oldval_0) >> 8; + //RTPRINT(FINIT, INIT_IQK, ("X = 0x%lx, TX0_A = 0x%lx, Oldval_0 0x%lx\n", X, TX0_A, Oldval_0)); + PHY_SetBBReg(pAdapter, rOFDM0_XATxIQImbalance, 0x3FF, TX0_A); + PHY_SetBBReg(pAdapter, rOFDM0_ECCAThreshold, BIT(31), ((X* Oldval_0>>7) & 0x1)); + + Y = result[final_candidate][1]; + if ((Y & 0x00000200) != 0) + Y = Y | 0xFFFFFC00; + TX0_C = (Y * Oldval_0) >> 8; + //RTPRINT(FINIT, INIT_IQK, ("Y = 0x%lx, TX = 0x%lx\n", Y, TX0_C)); + PHY_SetBBReg(pAdapter, rOFDM0_XCTxAFE, 0xF0000000, ((TX0_C&0x3C0)>>6)); + PHY_SetBBReg(pAdapter, rOFDM0_XATxIQImbalance, 0x003F0000, (TX0_C&0x3F)); + PHY_SetBBReg(pAdapter, rOFDM0_ECCAThreshold, BIT(29), ((Y* Oldval_0>>7) & 0x1)); + + if(bTxOnly) + { + DBG_8192C("_PHY_PathAFillIQKMatrix only Tx OK\n"); + return; + } + + reg = result[final_candidate][2]; + PHY_SetBBReg(pAdapter, rOFDM0_XARxIQImbalance, 0x3FF, reg); + + reg = result[final_candidate][3] & 0x3F; + PHY_SetBBReg(pAdapter, rOFDM0_XARxIQImbalance, 0xFC00, reg); + + reg = (result[final_candidate][3] >> 6) & 0xF; + PHY_SetBBReg(pAdapter, rOFDM0_RxIQExtAnta, 0xF0000000, reg); + } +} + +static VOID +_PHY_PathBFillIQKMatrix( + IN PADAPTER pAdapter, + IN BOOLEAN bIQKOK, + IN int result[][8], + IN u8 final_candidate, + IN BOOLEAN bTxOnly //do Tx only + ) +{ + u32 Oldval_1, X, TX1_A, reg; + s32 Y, TX1_C; + + DBG_8192C("Path B IQ Calibration %s !\n",(bIQKOK)?"Success":"Failed"); + + if(final_candidate == 0xFF) + return; + else if(bIQKOK) + { + Oldval_1 = (PHY_QueryBBReg(pAdapter, rOFDM0_XBTxIQImbalance, bMaskDWord) >> 22) & 0x3FF; + + X = result[final_candidate][4]; + if ((X & 0x00000200) != 0) + X = X | 0xFFFFFC00; + TX1_A = (X * Oldval_1) >> 8; + //RTPRINT(FINIT, INIT_IQK, ("X = 0x%lx, TX1_A = 0x%lx\n", X, TX1_A)); + PHY_SetBBReg(pAdapter, rOFDM0_XBTxIQImbalance, 0x3FF, TX1_A); + PHY_SetBBReg(pAdapter, rOFDM0_ECCAThreshold, BIT(27), ((X* Oldval_1>>7) & 0x1)); + + Y = result[final_candidate][5]; + if ((Y & 0x00000200) != 0) + Y = Y | 0xFFFFFC00; + TX1_C = (Y * Oldval_1) >> 8; + //RTPRINT(FINIT, INIT_IQK, ("Y = 0x%lx, TX1_C = 0x%lx\n", Y, TX1_C)); + PHY_SetBBReg(pAdapter, rOFDM0_XDTxAFE, 0xF0000000, ((TX1_C&0x3C0)>>6)); + PHY_SetBBReg(pAdapter, rOFDM0_XBTxIQImbalance, 0x003F0000, (TX1_C&0x3F)); + PHY_SetBBReg(pAdapter, rOFDM0_ECCAThreshold, BIT(25), ((Y* Oldval_1>>7) & 0x1)); + + if(bTxOnly) + return; + + reg = result[final_candidate][6]; + PHY_SetBBReg(pAdapter, rOFDM0_XBRxIQImbalance, 0x3FF, reg); + + reg = result[final_candidate][7] & 0x3F; + PHY_SetBBReg(pAdapter, rOFDM0_XBRxIQImbalance, 0xFC00, reg); + + reg = (result[final_candidate][7] >> 6) & 0xF; + PHY_SetBBReg(pAdapter, rOFDM0_AGCRSSITable, 0x0000F000, reg); + } +} + +static VOID +_PHY_SaveADDARegisters( + IN PADAPTER pAdapter, + IN u32* ADDAReg, + IN u32* ADDABackup, + IN u32 RegisterNum + ) +{ + u32 i; + + //RTPRINT(FINIT, INIT_IQK, ("Save ADDA parameters.\n")); + for( i = 0 ; i < RegisterNum ; i++){ + ADDABackup[i] = PHY_QueryBBReg(pAdapter, ADDAReg[i], bMaskDWord); + } +} + +static VOID +_PHY_SaveMACRegisters( + IN PADAPTER pAdapter, + IN u32* MACReg, + IN u32* MACBackup + ) +{ + u32 i; + + //RTPRINT(FINIT, INIT_IQK, ("Save MAC parameters.\n")); + for( i = 0 ; i < (IQK_MAC_REG_NUM - 1); i++){ + MACBackup[i] =rtw_read8(pAdapter, MACReg[i]); + } + MACBackup[i] = rtw_read32(pAdapter, MACReg[i]); + +} + +static VOID +_PHY_ReloadADDARegisters( + IN PADAPTER pAdapter, + IN u32* ADDAReg, + IN u32* ADDABackup, + IN u32 RegiesterNum + ) +{ + u32 i; + + //RTPRINT(FINIT, INIT_IQK, ("Reload ADDA power saving parameters !\n")); + for(i = 0 ; i < RegiesterNum ; i++){ + PHY_SetBBReg(pAdapter, ADDAReg[i], bMaskDWord, ADDABackup[i]); + } +} + +static VOID +_PHY_ReloadMACRegisters( + IN PADAPTER pAdapter, + IN u32* MACReg, + IN u32* MACBackup + ) +{ + u32 i; + + //RTPRINT(FINIT, INIT_IQK, ("Reload MAC parameters !\n")); + for(i = 0 ; i < (IQK_MAC_REG_NUM - 1); i++){ + rtw_write8(pAdapter, MACReg[i], (u8)MACBackup[i]); + } + rtw_write32(pAdapter, MACReg[i], MACBackup[i]); +} + +static VOID +_PHY_PathADDAOn( + IN PADAPTER pAdapter, + IN u32* ADDAReg, + IN BOOLEAN isPathAOn, + IN BOOLEAN is2T + ) +{ + u32 pathOn; + u32 i; + + //RTPRINT(FINIT, INIT_IQK, ("ADDA ON.\n")); + + pathOn = isPathAOn ? 0x04db25a4 : 0x0b1b25a4; + if(_FALSE == is2T){ + pathOn = 0x0bdb25a0; + PHY_SetBBReg(pAdapter, ADDAReg[0], bMaskDWord, 0x0b1b25a0); + } + else{ + PHY_SetBBReg(pAdapter, ADDAReg[0], bMaskDWord, pathOn); + } + + for( i = 1 ; i < IQK_ADDA_REG_NUM ; i++){ + PHY_SetBBReg(pAdapter, ADDAReg[i], bMaskDWord, pathOn); + } + +} + +static VOID +_PHY_MACSettingCalibration( + IN PADAPTER pAdapter, + IN u32* MACReg, + IN u32* MACBackup + ) +{ + u32 i = 0; + + //RTPRINT(FINIT, INIT_IQK, ("MAC settings for Calibration.\n")); + + rtw_write8(pAdapter, MACReg[i], 0x3F); + + for(i = 1 ; i < (IQK_MAC_REG_NUM - 1); i++){ + rtw_write8(pAdapter, MACReg[i], (u8)(MACBackup[i]&(~BIT3))); + } + rtw_write8(pAdapter, MACReg[i], (u8)(MACBackup[i]&(~BIT5))); + +} + +static VOID +_PHY_PathAStandBy( + IN PADAPTER pAdapter + ) +{ + //RTPRINT(FINIT, INIT_IQK, ("Path-A standby mode!\n")); + + PHY_SetBBReg(pAdapter, rFPGA0_IQK, bMaskDWord, 0x0); + PHY_SetBBReg(pAdapter, 0x840, bMaskDWord, 0x00010000); + PHY_SetBBReg(pAdapter, rFPGA0_IQK, bMaskDWord, 0x80800000); +} + +static VOID +_PHY_PIModeSwitch( + IN PADAPTER pAdapter, + IN BOOLEAN PIMode + ) +{ + u32 mode; + + //RTPRINT(FINIT, INIT_IQK, ("BB Switch to %s mode!\n", (PIMode ? "PI" : "SI"))); + + mode = PIMode ? 0x01000100 : 0x01000000; + PHY_SetBBReg(pAdapter, 0x820, bMaskDWord, mode); + PHY_SetBBReg(pAdapter, 0x828, bMaskDWord, mode); +} + +/* +return _FALSE => do IQK again +*/ +static BOOLEAN +_PHY_SimularityCompare( + IN PADAPTER pAdapter, + IN int result[][8], + IN u8 c1, + IN u8 c2 + ) +{ + u32 i, j, diff, SimularityBitMap, bound = 0; + HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter); + u8 final_candidate[2] = {0xFF, 0xFF}; //for path A and path B + BOOLEAN bResult = _TRUE, is2T = IS_92C_SERIAL( pHalData->VersionID); + + if(is2T) + bound = 8; + else + bound = 4; + + SimularityBitMap = 0; + + for( i = 0; i < bound; i++ ) + { + diff = (result[c1][i] > result[c2][i]) ? (result[c1][i] - result[c2][i]) : (result[c2][i] - result[c1][i]); + if (diff > MAX_TOLERANCE) + { + if((i == 2 || i == 6) && !SimularityBitMap) + { + if(result[c1][i]+result[c1][i+1] == 0) + final_candidate[(i/4)] = c2; + else if (result[c2][i]+result[c2][i+1] == 0) + final_candidate[(i/4)] = c1; + else + SimularityBitMap = SimularityBitMap|(1<<i); + } + else + SimularityBitMap = SimularityBitMap|(1<<i); + } + } + + if ( SimularityBitMap == 0) + { + for( i = 0; i < (bound/4); i++ ) + { + if(final_candidate[i] != 0xFF) + { + for( j = i*4; j < (i+1)*4-2; j++) + result[3][j] = result[final_candidate[i]][j]; + bResult = _FALSE; + } + } + return bResult; + } + else if (!(SimularityBitMap & 0x0F)) //path A OK + { + for(i = 0; i < 4; i++) + result[3][i] = result[c1][i]; + return _FALSE; + } + else if (!(SimularityBitMap & 0xF0) && is2T) //path B OK + { + for(i = 4; i < 8; i++) + result[3][i] = result[c1][i]; + return _FALSE; + } + else + return _FALSE; + +} + +static VOID +_PHY_IQCalibrate( + IN PADAPTER pAdapter, + IN int result[][8], + IN u8 t, + IN BOOLEAN is2T + ) +{ + HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter); + struct dm_priv *pdmpriv = &pHalData->dmpriv; + u32 i; + u8 PathAOK, PathBOK; + u32 ADDA_REG[IQK_ADDA_REG_NUM] = { + rFPGA0_XCD_SwitchControl, rBlue_Tooth, + rRx_Wait_CCA, rTx_CCK_RFON, + rTx_CCK_BBON, rTx_OFDM_RFON, + rTx_OFDM_BBON, rTx_To_Rx, + rTx_To_Tx, rRx_CCK, + rRx_OFDM, rRx_Wait_RIFS, + rRx_TO_Rx, rStandby, + rSleep, rPMPD_ANAEN }; + + u32 IQK_MAC_REG[IQK_MAC_REG_NUM] = { + REG_TXPAUSE, REG_BCN_CTRL, + REG_BCN_CTRL_1, REG_GPIO_MUXCFG}; + + u32 IQK_BB_REG_92C[IQK_BB_REG_NUM] = { + rOFDM0_TRxPathEnable, rOFDM0_TRMuxPar, + rFPGA0_XCD_RFInterfaceSW, rConfig_AntA, rConfig_AntB, + rFPGA0_XAB_RFInterfaceSW, rFPGA0_XA_RFInterfaceOE, + rFPGA0_XB_RFInterfaceOE, rFPGA0_RFMOD + }; + +#if MP_DRIVER + const u32 retryCount = 9; +#else + const u32 retryCount = 2; +#endif + + // Note: IQ calibration must be performed after loading + // PHY_REG.txt , and radio_a, radio_b.txt + + u32 bbvalue; + + if(t==0) + { + bbvalue = PHY_QueryBBReg(pAdapter, rFPGA0_RFMOD, bMaskDWord); + //RTPRINT(FINIT, INIT_IQK, ("PHY_IQCalibrate()==>0x%08lx\n",bbvalue)); + + //RTPRINT(FINIT, INIT_IQK, ("IQ Calibration for %s\n", (is2T ? "2T2R" : "1T1R"))); + + // Save ADDA parameters, turn Path A ADDA on + _PHY_SaveADDARegisters(pAdapter, ADDA_REG, pdmpriv->ADDA_backup,IQK_ADDA_REG_NUM); + _PHY_SaveMACRegisters(pAdapter, IQK_MAC_REG, pdmpriv->IQK_MAC_backup); + _PHY_SaveADDARegisters(pAdapter, IQK_BB_REG_92C, pdmpriv->IQK_BB_backup, IQK_BB_REG_NUM); + } + _PHY_PathADDAOn(pAdapter, ADDA_REG, _TRUE, is2T); + + if(t==0) + { + pdmpriv->bRfPiEnable = (u8)PHY_QueryBBReg(pAdapter, rFPGA0_XA_HSSIParameter1, BIT(8)); + } + + if(!pdmpriv->bRfPiEnable){ + // Switch BB to PI mode to do IQ Calibration. + _PHY_PIModeSwitch(pAdapter, _TRUE); + } + + PHY_SetBBReg(pAdapter, rFPGA0_RFMOD, BIT24, 0x00); + PHY_SetBBReg(pAdapter, rOFDM0_TRxPathEnable, bMaskDWord, 0x03a05600); + PHY_SetBBReg(pAdapter, rOFDM0_TRMuxPar, bMaskDWord, 0x000800e4); + PHY_SetBBReg(pAdapter, rFPGA0_XCD_RFInterfaceSW, bMaskDWord, 0x22204000); + PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFInterfaceSW, BIT10, 0x01); + PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFInterfaceSW, BIT26, 0x01); + PHY_SetBBReg(pAdapter, rFPGA0_XA_RFInterfaceOE, BIT10, 0x00); + PHY_SetBBReg(pAdapter, rFPGA0_XB_RFInterfaceOE, BIT10, 0x00); + + if(is2T) + { + PHY_SetBBReg(pAdapter, rFPGA0_XA_LSSIParameter, bMaskDWord, 0x00010000); + PHY_SetBBReg(pAdapter, rFPGA0_XB_LSSIParameter, bMaskDWord, 0x00010000); + } + + //MAC settings + _PHY_MACSettingCalibration(pAdapter, IQK_MAC_REG, pdmpriv->IQK_MAC_backup); + + //Page B init + PHY_SetBBReg(pAdapter, rConfig_AntA, bMaskDWord, 0x00080000); + + if(is2T) + { + PHY_SetBBReg(pAdapter, rConfig_AntB, bMaskDWord, 0x00080000); + } + + // IQ calibration setting + //RTPRINT(FINIT, INIT_IQK, ("IQK setting!\n")); + PHY_SetBBReg(pAdapter, rFPGA0_IQK, bMaskDWord, 0x80800000); + PHY_SetBBReg(pAdapter, rTx_IQK, bMaskDWord, 0x01007c00); + PHY_SetBBReg(pAdapter, rRx_IQK, bMaskDWord, 0x01004800); + + for(i = 0 ; i < retryCount ; i++){ + PathAOK = _PHY_PathA_IQK(pAdapter, is2T); + if(PathAOK == 0x03){ + DBG_8192C("Path A IQK Success!!\n"); + result[t][0] = (PHY_QueryBBReg(pAdapter, rTx_Power_Before_IQK_A, bMaskDWord)&0x3FF0000)>>16; + result[t][1] = (PHY_QueryBBReg(pAdapter, rTx_Power_After_IQK_A, bMaskDWord)&0x3FF0000)>>16; + result[t][2] = (PHY_QueryBBReg(pAdapter, rRx_Power_Before_IQK_A_2, bMaskDWord)&0x3FF0000)>>16; + result[t][3] = (PHY_QueryBBReg(pAdapter, rRx_Power_After_IQK_A_2, bMaskDWord)&0x3FF0000)>>16; + break; + } + else if (i == (retryCount-1) && PathAOK == 0x01) //Tx IQK OK + { + DBG_8192C("Path A IQK Only Tx Success!!\n"); + + result[t][0] = (PHY_QueryBBReg(pAdapter, rTx_Power_Before_IQK_A, bMaskDWord)&0x3FF0000)>>16; + result[t][1] = (PHY_QueryBBReg(pAdapter, rTx_Power_After_IQK_A, bMaskDWord)&0x3FF0000)>>16; + } + } + + if(0x00 == PathAOK){ + DBG_8192C("Path A IQK failed!!\n"); + } + + if(is2T){ + _PHY_PathAStandBy(pAdapter); + + // Turn Path B ADDA on + _PHY_PathADDAOn(pAdapter, ADDA_REG, _FALSE, is2T); + + for(i = 0 ; i < retryCount ; i++){ + PathBOK = _PHY_PathB_IQK(pAdapter); + if(PathBOK == 0x03){ + DBG_8192C("Path B IQK Success!!\n"); + result[t][4] = (PHY_QueryBBReg(pAdapter, rTx_Power_Before_IQK_B, bMaskDWord)&0x3FF0000)>>16; + result[t][5] = (PHY_QueryBBReg(pAdapter, rTx_Power_After_IQK_B, bMaskDWord)&0x3FF0000)>>16; + result[t][6] = (PHY_QueryBBReg(pAdapter, rRx_Power_Before_IQK_B_2, bMaskDWord)&0x3FF0000)>>16; + result[t][7] = (PHY_QueryBBReg(pAdapter, rRx_Power_After_IQK_B_2, bMaskDWord)&0x3FF0000)>>16; + break; + } + else if (i == (retryCount - 1) && PathBOK == 0x01) //Tx IQK OK + { + DBG_8192C("Path B Only Tx IQK Success!!\n"); + result[t][4] = (PHY_QueryBBReg(pAdapter, rTx_Power_Before_IQK_B, bMaskDWord)&0x3FF0000)>>16; + result[t][5] = (PHY_QueryBBReg(pAdapter, rTx_Power_After_IQK_B, bMaskDWord)&0x3FF0000)>>16; + } + } + + if(0x00 == PathBOK){ + DBG_8192C("Path B IQK failed!!\n"); + } + } + + //Back to BB mode, load original value + //RTPRINT(FINIT, INIT_IQK, ("IQK:Back to BB mode, load original value!\n")); + PHY_SetBBReg(pAdapter, rFPGA0_IQK, bMaskDWord, 0); + + if(t!=0) + { + if(!pdmpriv->bRfPiEnable){ + // Switch back BB to SI mode after finish IQ Calibration. + _PHY_PIModeSwitch(pAdapter, _FALSE); + } + + // Reload ADDA power saving parameters + _PHY_ReloadADDARegisters(pAdapter, ADDA_REG, pdmpriv->ADDA_backup, IQK_ADDA_REG_NUM); + + // Reload MAC parameters + _PHY_ReloadMACRegisters(pAdapter, IQK_MAC_REG, pdmpriv->IQK_MAC_backup); + + // Reload BB parameters + _PHY_ReloadADDARegisters(pAdapter, IQK_BB_REG_92C, pdmpriv->IQK_BB_backup, IQK_BB_REG_NUM); + + // Restore RX initial gain + PHY_SetBBReg(pAdapter, rFPGA0_XA_LSSIParameter, bMaskDWord, 0x00032ed3); + if(is2T){ + PHY_SetBBReg(pAdapter, rFPGA0_XB_LSSIParameter, bMaskDWord, 0x00032ed3); + } + + //load 0xe30 IQC default value + PHY_SetBBReg(pAdapter, rTx_IQK_Tone_A, bMaskDWord, 0x01008c00); + PHY_SetBBReg(pAdapter, rRx_IQK_Tone_A, bMaskDWord, 0x01008c00); + + } + //RTPRINT(FINIT, INIT_IQK, ("_PHY_IQCalibrate() <==\n")); + +} + + +static VOID +_PHY_LCCalibrate( + IN PADAPTER pAdapter, + IN BOOLEAN is2T + ) +{ + u8 tmpReg; + u32 RF_Amode = 0, RF_Bmode = 0, LC_Cal; + + //Check continuous TX and Packet TX + tmpReg = rtw_read8(pAdapter, 0xd03); + + if((tmpReg&0x70) != 0) //Deal with contisuous TX case + rtw_write8(pAdapter, 0xd03, tmpReg&0x8F); //disable all continuous TX + else // Deal with Packet TX case + rtw_write8(pAdapter, REG_TXPAUSE, 0xFF); // block all queues + + if((tmpReg&0x70) != 0) + { + //1. Read original RF mode + //Path-A + RF_Amode = PHY_QueryRFReg(pAdapter, RF_PATH_A, RF_AC, bMask12Bits); + + //Path-B + if(is2T) + RF_Bmode = PHY_QueryRFReg(pAdapter, RF_PATH_B, RF_AC, bMask12Bits); + + //2. Set RF mode = standby mode + //Path-A + PHY_SetRFReg(pAdapter, RF_PATH_A, RF_AC, bMask12Bits, (RF_Amode&0x8FFFF)|0x10000); + + //Path-B + if(is2T) + PHY_SetRFReg(pAdapter, RF_PATH_B, RF_AC, bMask12Bits, (RF_Bmode&0x8FFFF)|0x10000); + } + + //3. Read RF reg18 + LC_Cal = PHY_QueryRFReg(pAdapter, RF_PATH_A, RF_CHNLBW, bMask12Bits); + + //4. Set LC calibration begin + PHY_SetRFReg(pAdapter, RF_PATH_A, RF_CHNLBW, bMask12Bits, LC_Cal|0x08000); + + #ifdef CONFIG_LONG_DELAY_ISSUE + rtw_msleep_os(100); + #else + rtw_mdelay_os(100); + #endif + + //Restore original situation + if((tmpReg&0x70) != 0) //Deal with contisuous TX case + { + //Path-A + rtw_write8(pAdapter, 0xd03, tmpReg); + PHY_SetRFReg(pAdapter, RF_PATH_A, RF_AC, bMask12Bits, RF_Amode); + + //Path-B + if(is2T) + PHY_SetRFReg(pAdapter, RF_PATH_B, RF_AC, bMask12Bits, RF_Bmode); + } + else // Deal with Packet TX case + { + rtw_write8(pAdapter, REG_TXPAUSE, 0x00); + } + +} + + +//Analog Pre-distortion calibration +#define APK_BB_REG_NUM 8 +#define APK_CURVE_REG_NUM 4 +#define PATH_NUM 2 + +static VOID +_PHY_APCalibrate( + IN PADAPTER pAdapter, + IN char delta, + IN BOOLEAN is2T + ) +{ + HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter); + struct dm_priv *pdmpriv = &pHalData->dmpriv; + + u32 regD[PATH_NUM]; + u32 tmpReg, index, offset, i, apkbound; + u8 path, pathbound = PATH_NUM; + u32 BB_backup[APK_BB_REG_NUM]; + u32 BB_REG[APK_BB_REG_NUM] = { + rFPGA1_TxBlock, rOFDM0_TRxPathEnable, + rFPGA0_RFMOD, rOFDM0_TRMuxPar, + rFPGA0_XCD_RFInterfaceSW, rFPGA0_XAB_RFInterfaceSW, + rFPGA0_XA_RFInterfaceOE, rFPGA0_XB_RFInterfaceOE }; + u32 BB_AP_MODE[APK_BB_REG_NUM] = { + 0x00000020, 0x00a05430, 0x02040000, + 0x000800e4, 0x00204000 }; + u32 BB_normal_AP_MODE[APK_BB_REG_NUM] = { + 0x00000020, 0x00a05430, 0x02040000, + 0x000800e4, 0x22204000 }; + + u32 AFE_backup[IQK_ADDA_REG_NUM]; + u32 AFE_REG[IQK_ADDA_REG_NUM] = { + rFPGA0_XCD_SwitchControl, rBlue_Tooth, + rRx_Wait_CCA, rTx_CCK_RFON, + rTx_CCK_BBON, rTx_OFDM_RFON, + rTx_OFDM_BBON, rTx_To_Rx, + rTx_To_Tx, rRx_CCK, + rRx_OFDM, rRx_Wait_RIFS, + rRx_TO_Rx, rStandby, + rSleep, rPMPD_ANAEN }; + + u32 MAC_backup[IQK_MAC_REG_NUM]; + u32 MAC_REG[IQK_MAC_REG_NUM] = { + REG_TXPAUSE, REG_BCN_CTRL, + REG_BCN_CTRL_1, REG_GPIO_MUXCFG}; + + u32 APK_RF_init_value[PATH_NUM][APK_BB_REG_NUM] = { + {0x0852c, 0x1852c, 0x5852c, 0x1852c, 0x5852c}, + {0x2852e, 0x0852e, 0x3852e, 0x0852e, 0x0852e} + }; + + u32 APK_normal_RF_init_value[PATH_NUM][APK_BB_REG_NUM] = { + {0x0852c, 0x0a52c, 0x3a52c, 0x5a52c, 0x5a52c}, //path settings equal to path b settings + {0x0852c, 0x0a52c, 0x5a52c, 0x5a52c, 0x5a52c} + }; + + u32 APK_RF_value_0[PATH_NUM][APK_BB_REG_NUM] = { + {0x52019, 0x52014, 0x52013, 0x5200f, 0x5208d}, + {0x5201a, 0x52019, 0x52016, 0x52033, 0x52050} + }; + + u32 APK_normal_RF_value_0[PATH_NUM][APK_BB_REG_NUM] = { + {0x52019, 0x52017, 0x52010, 0x5200d, 0x5206a}, //path settings equal to path b settings + {0x52019, 0x52017, 0x52010, 0x5200d, 0x5206a} + }; +#if 0 + u32 APK_RF_value_A[PATH_NUM][APK_BB_REG_NUM] = { + {0x1adb0, 0x1adb0, 0x1ada0, 0x1ad90, 0x1ad80}, + {0x00fb0, 0x00fb0, 0x00fa0, 0x00f90, 0x00f80} + }; +#endif + u32 AFE_on_off[PATH_NUM] = { + 0x04db25a4, 0x0b1b25a4}; //path A on path B off / path A off path B on + + u32 APK_offset[PATH_NUM] = { + rConfig_AntA, rConfig_AntB}; + + u32 APK_normal_offset[PATH_NUM] = { + rConfig_Pmpd_AntA, rConfig_Pmpd_AntB}; + + u32 APK_value[PATH_NUM] = { + 0x92fc0000, 0x12fc0000}; + + u32 APK_normal_value[PATH_NUM] = { + 0x92680000, 0x12680000}; + + char APK_delta_mapping[APK_BB_REG_NUM][13] = { + {-4, -3, -2, -2, -1, -1, 0, 1, 2, 3, 4, 5, 6}, + {-4, -3, -2, -2, -1, -1, 0, 1, 2, 3, 4, 5, 6}, + {-6, -4, -2, -2, -1, -1, 0, 1, 2, 3, 4, 5, 6}, + {-1, -1, -1, -1, -1, -1, 0, 1, 2, 3, 4, 5, 6}, + {-11, -9, -7, -5, -3, -1, 0, 0, 0, 0, 0, 0, 0} + }; + + u32 APK_normal_setting_value_1[13] = { + 0x01017018, 0xf7ed8f84, 0x1b1a1816, 0x2522201e, 0x322e2b28, + 0x433f3a36, 0x5b544e49, 0x7b726a62, 0xa69a8f84, 0xdfcfc0b3, + 0x12680000, 0x00880000, 0x00880000 + }; + + u32 APK_normal_setting_value_2[16] = { + 0x01c7021d, 0x01670183, 0x01000123, 0x00bf00e2, 0x008d00a3, + 0x0068007b, 0x004d0059, 0x003a0042, 0x002b0031, 0x001f0025, + 0x0017001b, 0x00110014, 0x000c000f, 0x0009000b, 0x00070008, + 0x00050006 + }; + + u32 APK_result[PATH_NUM][APK_BB_REG_NUM]; //val_1_1a, val_1_2a, val_2a, val_3a, val_4a + //u32 AP_curve[PATH_NUM][APK_CURVE_REG_NUM]; + + int BB_offset, delta_V, delta_offset; + +#if (MP_DRIVER == 1) + PMPT_CONTEXT pMptCtx = &pAdapter->mppriv.MptCtx; + + pMptCtx->APK_bound[0] = 45; + pMptCtx->APK_bound[1] = 52; +#endif + + //RTPRINT(FINIT, INIT_IQK, ("==>PHY_APCalibrate() delta %d\n", delta)); + + //RTPRINT(FINIT, INIT_IQK, ("AP Calibration for %s %s\n", (is2T ? "2T2R" : "1T1R"), (isNormal ? "Normal chip" : "Test chip"))); + + if(!is2T) + pathbound = 1; + + //2 FOR NORMAL CHIP SETTINGS + +// Temporarily do not allow normal driver to do the following settings because these offset +// and value will cause RF internal PA to be unpredictably disabled by HW, such that RF Tx signal +// will disappear after disable/enable card many times on 88CU. RF SD and DD have not find the +// root cause, so we remove these actions temporarily. Added by tynli and SD3 Allen. 2010.05.31. +#if (MP_DRIVER != 1) + return; +#endif + + //settings adjust for normal chip + for(index = 0; index < PATH_NUM; index ++) + { + APK_offset[index] = APK_normal_offset[index]; + APK_value[index] = APK_normal_value[index]; + AFE_on_off[index] = 0x6fdb25a4; + } + + for(index = 0; index < APK_BB_REG_NUM; index ++) + { + for(path = 0; path < pathbound; path++) + { + APK_RF_init_value[path][index] = APK_normal_RF_init_value[path][index]; + APK_RF_value_0[path][index] = APK_normal_RF_value_0[path][index]; + } + BB_AP_MODE[index] = BB_normal_AP_MODE[index]; + } + + apkbound = 6; + + //save BB default value + for(index = 0; index < APK_BB_REG_NUM ; index++) + { + if(index == 0) //skip + continue; + BB_backup[index] = PHY_QueryBBReg(pAdapter, BB_REG[index], bMaskDWord); + } + + //save MAC default value + _PHY_SaveMACRegisters(pAdapter, MAC_REG, MAC_backup); + + //save AFE default value + _PHY_SaveADDARegisters(pAdapter, AFE_REG, AFE_backup, IQK_ADDA_REG_NUM); + + for(path = 0; path < pathbound; path++) + { + if(path == RF_PATH_A) + { + //path A APK + //load APK setting + //path-A + offset = rPdp_AntA; + for(index = 0; index < 11; index ++) + { + PHY_SetBBReg(pAdapter, offset, bMaskDWord, APK_normal_setting_value_1[index]); + //RTPRINT(FINIT, INIT_IQK, ("PHY_APCalibrate() offset 0x%x value 0x%x\n", offset, PHY_QueryBBReg(pAdapter, offset, bMaskDWord))); + + offset += 0x04; + } + + PHY_SetBBReg(pAdapter, rConfig_Pmpd_AntB, bMaskDWord, 0x12680000); + + offset = rConfig_AntA; + for(; index < 13; index ++) + { + PHY_SetBBReg(pAdapter, offset, bMaskDWord, APK_normal_setting_value_1[index]); + //RTPRINT(FINIT, INIT_IQK, ("PHY_APCalibrate() offset 0x%x value 0x%x\n", offset, PHY_QueryBBReg(pAdapter, offset, bMaskDWord))); + + offset += 0x04; + } + + //page-B1 + PHY_SetBBReg(pAdapter, rFPGA0_IQK, bMaskDWord, 0x40000000); + + //path A + offset = rPdp_AntA; + for(index = 0; index < 16; index++) + { + PHY_SetBBReg(pAdapter, offset, bMaskDWord, APK_normal_setting_value_2[index]); + //RTPRINT(FINIT, INIT_IQK, ("PHY_APCalibrate() offset 0x%x value 0x%x\n", offset, PHY_QueryBBReg(pAdapter, offset, bMaskDWord))); + + offset += 0x04; + } + PHY_SetBBReg(pAdapter, rFPGA0_IQK, bMaskDWord, 0x00000000); + } + else if(path == RF_PATH_B) + { + //path B APK + //load APK setting + //path-B + offset = rPdp_AntB; + for(index = 0; index < 10; index ++) + { + PHY_SetBBReg(pAdapter, offset, bMaskDWord, APK_normal_setting_value_1[index]); + //RTPRINT(FINIT, INIT_IQK, ("PHY_APCalibrate() offset 0x%x value 0x%x\n", offset, PHY_QueryBBReg(pAdapter, offset, bMaskDWord))); + + offset += 0x04; + } + PHY_SetBBReg(pAdapter, rConfig_Pmpd_AntA, bMaskDWord, 0x12680000); + + PHY_SetBBReg(pAdapter, rConfig_Pmpd_AntB, bMaskDWord, 0x12680000); + + offset = rConfig_AntA; + index = 11; + for(; index < 13; index ++) //offset 0xb68, 0xb6c + { + PHY_SetBBReg(pAdapter, offset, bMaskDWord, APK_normal_setting_value_1[index]); + //RTPRINT(FINIT, INIT_IQK, ("PHY_APCalibrate() offset 0x%x value 0x%x\n", offset, PHY_QueryBBReg(pAdapter, offset, bMaskDWord))); + + offset += 0x04; + } + + //page-B1 + PHY_SetBBReg(pAdapter, rFPGA0_IQK, bMaskDWord, 0x40000000); + + //path B + offset = 0xb60; + for(index = 0; index < 16; index++) + { + PHY_SetBBReg(pAdapter, offset, bMaskDWord, APK_normal_setting_value_2[index]); + //RTPRINT(FINIT, INIT_IQK, ("PHY_APCalibrate() offset 0x%x value 0x%x\n", offset, PHY_QueryBBReg(pAdapter, offset, bMaskDWord))); + + offset += 0x04; + } + PHY_SetBBReg(pAdapter, rFPGA0_IQK, bMaskDWord, 0x00000000); + } + + //save RF default value + regD[path] = PHY_QueryRFReg(pAdapter, (RF_RADIO_PATH_E)path, RF_TXBIAS_A, bRFRegOffsetMask); + + //Path A AFE all on, path B AFE All off or vise versa + for(index = 0; index < IQK_ADDA_REG_NUM ; index++) + PHY_SetBBReg(pAdapter, AFE_REG[index], bMaskDWord, AFE_on_off[path]); + //RTPRINT(FINIT, INIT_IQK, ("PHY_APCalibrate() offset 0xe70 %x\n", PHY_QueryBBReg(pAdapter, 0xe70, bMaskDWord))); + + //BB to AP mode + if(path == 0) + { + for(index = 0; index < APK_BB_REG_NUM ; index++) + { + if(index == 0) //skip + continue; + else if (index < 5) + PHY_SetBBReg(pAdapter, BB_REG[index], bMaskDWord, BB_AP_MODE[index]); + else if (BB_REG[index] == 0x870) + PHY_SetBBReg(pAdapter, BB_REG[index], bMaskDWord, BB_backup[index]|BIT10|BIT26); + else + PHY_SetBBReg(pAdapter, BB_REG[index], BIT10, 0x0); + } + PHY_SetBBReg(pAdapter, rTx_IQK_Tone_A, bMaskDWord, 0x01008c00); + PHY_SetBBReg(pAdapter, rRx_IQK_Tone_A, bMaskDWord, 0x01008c00); + } + else //path B + { + PHY_SetBBReg(pAdapter, rTx_IQK_Tone_B, bMaskDWord, 0x01008c00); + PHY_SetBBReg(pAdapter, rRx_IQK_Tone_B, bMaskDWord, 0x01008c00); + } + + //RTPRINT(FINIT, INIT_IQK, ("PHY_APCalibrate() offset 0x800 %x\n", PHY_QueryBBReg(pAdapter, 0x800, bMaskDWord))); + + //MAC settings + _PHY_MACSettingCalibration(pAdapter, MAC_REG, MAC_backup); + + if(path == RF_PATH_A) //Path B to standby mode + { + PHY_SetRFReg(pAdapter, RF_PATH_B, RF_AC, bRFRegOffsetMask, 0x10000); + } + else //Path A to standby mode + { + PHY_SetRFReg(pAdapter, RF_PATH_A, RF_AC, bRFRegOffsetMask, 0x10000); + PHY_SetRFReg(pAdapter, RF_PATH_A, RF_MODE1, bRFRegOffsetMask, 0x1000f); + PHY_SetRFReg(pAdapter, RF_PATH_A, RF_MODE2, bRFRegOffsetMask, 0x20103); + } + + delta_offset = ((delta+14)/2); + if(delta_offset < 0) + delta_offset = 0; + else if (delta_offset > 12) + delta_offset = 12; + + //AP calibration + for(index = 0; index < APK_BB_REG_NUM; index++) + { + if(index != 1) //only DO PA11+PAD01001, AP RF setting + continue; + + tmpReg = APK_RF_init_value[path][index]; +#if 1 + if(!pdmpriv->bAPKThermalMeterIgnore) + { + BB_offset = (tmpReg & 0xF0000) >> 16; + + if(!(tmpReg & BIT15)) //sign bit 0 + { + BB_offset = -BB_offset; + } + + delta_V = APK_delta_mapping[index][delta_offset]; + + BB_offset += delta_V; + + //RTPRINT(FINIT, INIT_IQK, ("PHY_APCalibrate() APK num %d delta_V %d delta_offset %d\n", index, delta_V, delta_offset)); + + if(BB_offset < 0) + { + tmpReg = tmpReg & (~BIT15); + BB_offset = -BB_offset; + } + else + { + tmpReg = tmpReg | BIT15; + } + tmpReg = (tmpReg & 0xFFF0FFFF) | (BB_offset << 16); + } +#endif + +#ifdef CONFIG_PCI_HCI + if(IS_81xxC_VENDOR_UMC_B_CUT(pHalData->VersionID)) + PHY_SetRFReg(pAdapter, (RF_RADIO_PATH_E)path, RF_IPA_A, bRFRegOffsetMask, 0x894ae); + else +#endif + PHY_SetRFReg(pAdapter, (RF_RADIO_PATH_E)path, RF_IPA_A, bRFRegOffsetMask, 0x8992e); + //RTPRINT(FINIT, INIT_IQK, ("PHY_APCalibrate() offset 0xc %x\n", PHY_QueryRFReg(pAdapter, (RF_RADIO_PATH_E)path, 0xc, bMaskDWord))); + PHY_SetRFReg(pAdapter, (RF_RADIO_PATH_E)path, RF_AC, bRFRegOffsetMask, APK_RF_value_0[path][index]); + //RTPRINT(FINIT, INIT_IQK, ("PHY_APCalibrate() offset 0x0 %x\n", PHY_QueryRFReg(pAdapter, (RF_RADIO_PATH_E)path, 0x0, bMaskDWord))); + PHY_SetRFReg(pAdapter, (RF_RADIO_PATH_E)path, RF_TXBIAS_A, bRFRegOffsetMask, tmpReg); + //RTPRINT(FINIT, INIT_IQK, ("PHY_APCalibrate() offset 0xd %x\n", PHY_QueryRFReg(pAdapter, (RF_RADIO_PATH_E)path, 0xd, bMaskDWord))); + + // PA11+PAD01111, one shot + i = 0; + do + { + PHY_SetBBReg(pAdapter, rFPGA0_IQK, bMaskDWord, 0x80000000); + { + PHY_SetBBReg(pAdapter, APK_offset[path], bMaskDWord, APK_value[0]); + //RTPRINT(FINIT, INIT_IQK, ("PHY_APCalibrate() offset 0x%x value 0x%x\n", APK_offset[path], PHY_QueryBBReg(pAdapter, APK_offset[path], bMaskDWord))); + rtw_mdelay_os(3); + PHY_SetBBReg(pAdapter, APK_offset[path], bMaskDWord, APK_value[1]); + //RTPRINT(FINIT, INIT_IQK, ("PHY_APCalibrate() offset 0x%x value 0x%x\n", APK_offset[path], PHY_QueryBBReg(pAdapter, APK_offset[path], bMaskDWord))); + #ifdef CONFIG_LONG_DELAY_ISSUE + rtw_msleep_os(20); + #else + rtw_mdelay_os(20); + #endif + } + PHY_SetBBReg(pAdapter, rFPGA0_IQK, bMaskDWord, 0x00000000); + + if(path == RF_PATH_A) + tmpReg = PHY_QueryBBReg(pAdapter, rAPK, 0x03E00000); + else + tmpReg = PHY_QueryBBReg(pAdapter, rAPK, 0xF8000000); + //RTPRINT(FINIT, INIT_IQK, ("PHY_APCalibrate() offset 0xbd8[25:21] %x\n", tmpReg)); + + i++; + } + while(tmpReg > apkbound && i < 4); + + APK_result[path][index] = tmpReg; + } + } + + //reload MAC default value + _PHY_ReloadMACRegisters(pAdapter, MAC_REG, MAC_backup); + + //reload BB default value + for(index = 0; index < APK_BB_REG_NUM ; index++) + { + if(index == 0) //skip + continue; + PHY_SetBBReg(pAdapter, BB_REG[index], bMaskDWord, BB_backup[index]); + } + + //reload AFE default value + _PHY_ReloadADDARegisters(pAdapter, AFE_REG, AFE_backup, IQK_ADDA_REG_NUM); + + //reload RF path default value + for(path = 0; path < pathbound; path++) + { + PHY_SetRFReg(pAdapter, (RF_RADIO_PATH_E)path, RF_TXBIAS_A, bRFRegOffsetMask, regD[path]); + if(path == RF_PATH_B) + { + PHY_SetRFReg(pAdapter, RF_PATH_A, RF_MODE1, bRFRegOffsetMask, 0x1000f); + PHY_SetRFReg(pAdapter, RF_PATH_A, RF_MODE2, bRFRegOffsetMask, 0x20101); + } + + //note no index == 0 + if (APK_result[path][1] > 6) + APK_result[path][1] = 6; + //RTPRINT(FINIT, INIT_IQK, ("apk path %d result %d 0x%x \t", path, 1, APK_result[path][1])); + } + + //RTPRINT(FINIT, INIT_IQK, ("\n")); + + + for(path = 0; path < pathbound; path++) + { + PHY_SetRFReg(pAdapter, (RF_RADIO_PATH_E)path, RF_BS_PA_APSET_G1_G4, bRFRegOffsetMask, + ((APK_result[path][1] << 15) | (APK_result[path][1] << 10) | (APK_result[path][1] << 5) | APK_result[path][1])); + if(path == RF_PATH_A) + PHY_SetRFReg(pAdapter, (RF_RADIO_PATH_E)path, RF_BS_PA_APSET_G5_G8, bRFRegOffsetMask, + ((APK_result[path][1] << 15) | (APK_result[path][1] << 10) | (0x00 << 5) | 0x05)); + else + PHY_SetRFReg(pAdapter, (RF_RADIO_PATH_E)path, RF_BS_PA_APSET_G5_G8, bRFRegOffsetMask, + ((APK_result[path][1] << 15) | (APK_result[path][1] << 10) | (0x02 << 5) | 0x05)); + PHY_SetRFReg(pAdapter, (RF_RADIO_PATH_E)path, RF_BS_PA_APSET_G9_G11, bRFRegOffsetMask, + ((0x08 << 15) | (0x08 << 10) | (0x08 << 5) | 0x08)); + } + + pdmpriv->bAPKdone = _TRUE; + + //RTPRINT(FINIT, INIT_IQK, ("<==PHY_APCalibrate()\n")); +} + +static VOID _PHY_SetRFPathSwitch( + IN PADAPTER pAdapter, + IN BOOLEAN bMain, + IN BOOLEAN is2T + ) +{ + u8 u1bTmp; + + if(!pAdapter->hw_init_completed) + { + u1bTmp = rtw_read8(pAdapter, REG_LEDCFG2) | BIT7; + rtw_write8(pAdapter, REG_LEDCFG2, u1bTmp); + //PHY_SetBBReg(pAdapter, REG_LEDCFG0, BIT23, 0x01); + PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFParameter, BIT13, 0x01); + } + + if(is2T) + { + if(bMain) + PHY_SetBBReg(pAdapter, rFPGA0_XB_RFInterfaceOE, BIT5|BIT6, 0x1); //92C_Path_A + else + PHY_SetBBReg(pAdapter, rFPGA0_XB_RFInterfaceOE, BIT5|BIT6, 0x2); //BT + } + else + { + + if(bMain) + PHY_SetBBReg(pAdapter, rFPGA0_XA_RFInterfaceOE, 0x300, 0x2); //Main + else + PHY_SetBBReg(pAdapter, rFPGA0_XA_RFInterfaceOE, 0x300, 0x1); //Aux + } + +} + +//return value TRUE => Main; FALSE => Aux + +static BOOLEAN _PHY_QueryRFPathSwitch( + IN PADAPTER pAdapter, + IN BOOLEAN is2T + ) +{ +// if(is2T) +// return _TRUE; + + if(!pAdapter->hw_init_completed) + { + PHY_SetBBReg(pAdapter, REG_LEDCFG0, BIT23, 0x01); + PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFParameter, BIT13, 0x01); + } + + if(is2T) + { + if(PHY_QueryBBReg(pAdapter, rFPGA0_XB_RFInterfaceOE, BIT5|BIT6) == 0x01) + return _TRUE; + else + return _FALSE; + } + else + { + if(PHY_QueryBBReg(pAdapter, rFPGA0_XA_RFInterfaceOE, 0x300) == 0x02) + return _TRUE; + else + return _FALSE; + } +} + +VOID +rtl8192c_PHY_IQCalibrate( + IN PADAPTER pAdapter, + IN BOOLEAN bReCovery + ) +{ + HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter); + struct dm_priv *pdmpriv = &pHalData->dmpriv; + s32 result[4][8]; //last is final result + u8 i, final_candidate; + BOOLEAN bPathAOK, bPathBOK; + s32 RegE94, RegE9C, RegEA4, RegEAC, RegEB4, RegEBC, RegEC4, RegECC, RegTmp = 0; + BOOLEAN is12simular, is13simular, is23simular; + BOOLEAN bStartContTx = _FALSE, bSingleTone = _FALSE, bCarrierSuppression = _FALSE; + u32 IQK_BB_REG_92C[IQK_BB_REG_NUM] = { + rOFDM0_XARxIQImbalance, rOFDM0_XBRxIQImbalance, + rOFDM0_ECCAThreshold, rOFDM0_AGCRSSITable, + rOFDM0_XATxIQImbalance, rOFDM0_XBTxIQImbalance, + rOFDM0_XCTxAFE, rOFDM0_XDTxAFE, + rOFDM0_RxIQExtAnta}; + + +#if MP_DRIVER == 1 + bStartContTx = pAdapter->mppriv.MptCtx.bStartContTx; + bSingleTone = pAdapter->mppriv.MptCtx.bSingleTone; + bCarrierSuppression = pAdapter->mppriv.MptCtx.bCarrierSuppression; +#endif + + //ignore IQK when continuous Tx + if(bStartContTx || bSingleTone || bCarrierSuppression) + return; + +#if DISABLE_BB_RF + return; +#endif + + if(bReCovery) + { + _PHY_ReloadADDARegisters(pAdapter, IQK_BB_REG_92C, pdmpriv->IQK_BB_backup_recover, 9); + return; + } + DBG_8192C("IQK:Start!!!\n"); + + for(i = 0; i < 8; i++) + { + result[0][i] = 0; + result[1][i] = 0; + result[2][i] = 0; + result[3][i] = 0; + } + final_candidate = 0xff; + bPathAOK = _FALSE; + bPathBOK = _FALSE; + is12simular = _FALSE; + is23simular = _FALSE; + is13simular = _FALSE; + + for (i=0; i<3; i++) + { + if(IS_92C_SERIAL( pHalData->VersionID)){ + _PHY_IQCalibrate(pAdapter, result, i, _TRUE); + } + else{ + // For 88C 1T1R + _PHY_IQCalibrate(pAdapter, result, i, _FALSE); + } + + if(i == 1) + { + is12simular = _PHY_SimularityCompare(pAdapter, result, 0, 1); + if(is12simular) + { + final_candidate = 0; + break; + } + } + + if(i == 2) + { + is13simular = _PHY_SimularityCompare(pAdapter, result, 0, 2); + if(is13simular) + { + final_candidate = 0; + break; + } + + is23simular = _PHY_SimularityCompare(pAdapter, result, 1, 2); + if(is23simular) + final_candidate = 1; + else + { + for(i = 0; i < 8; i++) + RegTmp += result[3][i]; + + if(RegTmp != 0) + final_candidate = 3; + else + final_candidate = 0xFF; + } + } + } + + for (i=0; i<4; i++) + { + RegE94 = result[i][0]; + RegE9C = result[i][1]; + RegEA4 = result[i][2]; + RegEAC = result[i][3]; + RegEB4 = result[i][4]; + RegEBC = result[i][5]; + RegEC4 = result[i][6]; + RegECC = result[i][7]; + //RTPRINT(FINIT, INIT_IQK, ("IQK: RegE94=%lx RegE9C=%lx RegEA4=%lx RegEAC=%lx RegEB4=%lx RegEBC=%lx RegEC4=%lx RegECC=%lx\n ", RegE94, RegE9C, RegEA4, RegEAC, RegEB4, RegEBC, RegEC4, RegECC)); + } + + if(final_candidate != 0xff) + { + pdmpriv->RegE94 = RegE94 = result[final_candidate][0]; + pdmpriv->RegE9C = RegE9C = result[final_candidate][1]; + RegEA4 = result[final_candidate][2]; + RegEAC = result[final_candidate][3]; + pdmpriv->RegEB4 = RegEB4 = result[final_candidate][4]; + pdmpriv->RegEBC = RegEBC = result[final_candidate][5]; + RegEC4 = result[final_candidate][6]; + RegECC = result[final_candidate][7]; + DBG_8192C("IQK: final_candidate is %x\n", final_candidate); + DBG_8192C("IQK: RegE94=%x RegE9C=%x RegEA4=%x RegEAC=%x RegEB4=%x RegEBC=%x RegEC4=%x RegECC=%x\n ", RegE94, RegE9C, RegEA4, RegEAC, RegEB4, RegEBC, RegEC4, RegECC); + bPathAOK = bPathBOK = _TRUE; + } + else + { + RegE94 = RegEB4 = pdmpriv->RegE94 = pdmpriv->RegEB4 = 0x100; //X default value + RegE9C = RegEBC = pdmpriv->RegE9C = pdmpriv->RegEBC = 0x0; //Y default value + } + + if((RegE94 != 0)/*&&(RegEA4 != 0)*/) + _PHY_PathAFillIQKMatrix(pAdapter, bPathAOK, result, final_candidate, (RegEA4 == 0)); + + if(IS_92C_SERIAL( pHalData->VersionID)){ + if((RegEB4 != 0)/*&&(RegEC4 != 0)*/) + _PHY_PathBFillIQKMatrix(pAdapter, bPathBOK, result, final_candidate, (RegEC4 == 0)); + } + + _PHY_SaveADDARegisters(pAdapter, IQK_BB_REG_92C, pdmpriv->IQK_BB_backup_recover, 9); + +} + + +VOID +rtl8192c_PHY_LCCalibrate( + IN PADAPTER pAdapter + ) +{ + HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter); + struct mlme_ext_priv *pmlmeext = &pAdapter->mlmeextpriv; + BOOLEAN bStartContTx = _FALSE, bSingleTone = _FALSE, bCarrierSuppression = _FALSE; + +#if MP_DRIVER == 1 + bStartContTx = pAdapter->mppriv.MptCtx.bStartContTx; + bSingleTone = pAdapter->mppriv.MptCtx.bSingleTone; + bCarrierSuppression = pAdapter->mppriv.MptCtx.bCarrierSuppression; +#endif + +#if DISABLE_BB_RF + return; +#endif + + //ignore IQK when continuous Tx + if(bStartContTx || bSingleTone || bCarrierSuppression) + return; + + if(pmlmeext->sitesurvey_res.state == SCAN_PROCESS) + return; + + if(IS_92C_SERIAL( pHalData->VersionID)){ + _PHY_LCCalibrate(pAdapter, _TRUE); + } + else{ + // For 88C 1T1R + _PHY_LCCalibrate(pAdapter, _FALSE); + } +} + +VOID +rtl8192c_PHY_APCalibrate( + IN PADAPTER pAdapter, + IN char delta + ) +{ + HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter); + struct dm_priv *pdmpriv = &pHalData->dmpriv; + + //default disable APK, because Tx NG issue, suggest by Jenyu, 2011.11.25 + return; + +#if DISABLE_BB_RF + return; +#endif + + if(pdmpriv->bAPKdone) + return; + + if(IS_92C_SERIAL( pHalData->VersionID)){ + _PHY_APCalibrate(pAdapter, delta, _TRUE); + } + else{ + // For 88C 1T1R + _PHY_APCalibrate(pAdapter, delta, _FALSE); + } +} + +VOID rtl8192c_PHY_SetRFPathSwitch( + IN PADAPTER pAdapter, + IN BOOLEAN bMain + ) +{ + HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter); + +#if DISABLE_BB_RF + return; +#endif + + if(IS_92C_SERIAL( pHalData->VersionID)){ + _PHY_SetRFPathSwitch(pAdapter, bMain, _TRUE); + } + else{ + // For 88C 1T1R + _PHY_SetRFPathSwitch(pAdapter, bMain, _FALSE); + } +} + |