diff options
Diffstat (limited to 'drivers/net/wireless/bcmdhd.1.28.23.x.cn_ap6476/include/pcicfg.h')
| -rwxr-xr-x | drivers/net/wireless/bcmdhd.1.28.23.x.cn_ap6476/include/pcicfg.h | 100 |
1 files changed, 100 insertions, 0 deletions
diff --git a/drivers/net/wireless/bcmdhd.1.28.23.x.cn_ap6476/include/pcicfg.h b/drivers/net/wireless/bcmdhd.1.28.23.x.cn_ap6476/include/pcicfg.h new file mode 100755 index 00000000..0278bb29 --- /dev/null +++ b/drivers/net/wireless/bcmdhd.1.28.23.x.cn_ap6476/include/pcicfg.h @@ -0,0 +1,100 @@ +/* + * pcicfg.h: PCI configuration constants and structures. + * + * Copyright (C) 1999-2012, Broadcom Corporation + * + * Unless you and Broadcom execute a separate written software license + * agreement governing use of this software, this software is licensed to you + * under the terms of the GNU General Public License version 2 (the "GPL"), + * available at http://www.broadcom.com/licenses/GPLv2.php, with the + * following added to such license: + * + * As a special exception, the copyright holders of this software give you + * permission to link this software with independent modules, and to copy and + * distribute the resulting executable under terms of your choice, provided that + * you also meet, for each linked independent module, the terms and conditions of + * the license of that module. An independent module is a module which is not + * derived from this software. The special exception does not apply to any + * modifications of the software. + * + * Notwithstanding the above, under no circumstances may you combine this + * software in any way with any other Broadcom software provided under a license + * other than the GPL, without Broadcom's express prior written consent. + * + * $Id: pcicfg.h 309193 2012-01-19 00:03:57Z $ + */ + +#ifndef _h_pcicfg_ +#define _h_pcicfg_ + +/* A structure for the config registers is nice, but in most + * systems the config space is not memory mapped, so we need + * field offsetts. :-( + */ +#define PCI_CFG_VID 0 +#define PCI_CFG_DID 2 +#define PCI_CFG_CMD 4 +#define PCI_CFG_STAT 6 +#define PCI_CFG_REV 8 +#define PCI_CFG_PROGIF 9 +#define PCI_CFG_SUBCL 0xa +#define PCI_CFG_BASECL 0xb +#define PCI_CFG_CLSZ 0xc +#define PCI_CFG_LATTIM 0xd +#define PCI_CFG_HDR 0xe +#define PCI_CFG_BIST 0xf +#define PCI_CFG_BAR0 0x10 +#define PCI_CFG_BAR1 0x14 +#define PCI_CFG_BAR2 0x18 +#define PCI_CFG_BAR3 0x1c +#define PCI_CFG_BAR4 0x20 +#define PCI_CFG_BAR5 0x24 +#define PCI_CFG_CIS 0x28 +#define PCI_CFG_SVID 0x2c +#define PCI_CFG_SSID 0x2e +#define PCI_CFG_ROMBAR 0x30 +#define PCI_CFG_CAPPTR 0x34 +#define PCI_CFG_INT 0x3c +#define PCI_CFG_PIN 0x3d +#define PCI_CFG_MINGNT 0x3e +#define PCI_CFG_MAXLAT 0x3f +#define PCI_BAR0_WIN 0x80 /* backplane addres space accessed by BAR0 */ +#define PCI_BAR1_WIN 0x84 /* backplane addres space accessed by BAR1 */ +#define PCI_SPROM_CONTROL 0x88 /* sprom property control */ +#define PCI_BAR1_CONTROL 0x8c /* BAR1 region burst control */ +#define PCI_INT_STATUS 0x90 /* PCI and other cores interrupts */ +#define PCI_INT_MASK 0x94 /* mask of PCI and other cores interrupts */ +#define PCI_TO_SB_MB 0x98 /* signal backplane interrupts */ +#define PCI_BACKPLANE_ADDR 0xa0 /* address an arbitrary location on the system backplane */ +#define PCI_BACKPLANE_DATA 0xa4 /* data at the location specified by above address */ +#define PCI_CLK_CTL_ST 0xa8 /* pci config space clock control/status (>=rev14) */ +#define PCI_BAR0_WIN2 0xac /* backplane addres space accessed by second 4KB of BAR0 */ +#define PCI_GPIO_IN 0xb0 /* pci config space gpio input (>=rev3) */ +#define PCI_GPIO_OUT 0xb4 /* pci config space gpio output (>=rev3) */ +#define PCI_GPIO_OUTEN 0xb8 /* pci config space gpio output enable (>=rev3) */ + +#define PCI_BAR0_SHADOW_OFFSET (2 * 1024) /* bar0 + 2K accesses sprom shadow (in pci core) */ +#define PCI_BAR0_SPROM_OFFSET (4 * 1024) /* bar0 + 4K accesses external sprom */ +#define PCI_BAR0_PCIREGS_OFFSET (6 * 1024) /* bar0 + 6K accesses pci core registers */ +#define PCI_BAR0_PCISBR_OFFSET (4 * 1024) /* pci core SB registers are at the end of the + * 8KB window, so their address is the "regular" + * address plus 4K + */ +/* + * PCIE GEN2 changed some of the above locations for + * Bar0WrapperBase, SecondaryBAR0Window and SecondaryBAR0WrapperBase + * BAR0 maps 32K of register space +*/ +#define PCIE2_BAR0_WIN2 0x70 /* backplane addres space accessed by second 4KB of BAR0 */ +#define PCIE2_BAR0_CORE2_WIN 0x74 /* backplane addres space accessed by second 4KB of BAR0 */ +#define PCIE2_BAR0_CORE2_WIN2 0x78 /* backplane addres space accessed by second 4KB of BAR0 */ + +#define PCI_BAR0_WINSZ (16 * 1024) /* bar0 window size Match with corerev 13 */ +/* On pci corerev >= 13 and all pcie, the bar0 is now 16KB and it maps: */ +#define PCI_16KB0_PCIREGS_OFFSET (8 * 1024) /* bar0 + 8K accesses pci/pcie core registers */ +#define PCI_16KB0_CCREGS_OFFSET (12 * 1024) /* bar0 + 12K accesses chipc core registers */ +#define PCI_16KBB0_WINSZ (16 * 1024) /* bar0 window size */ + + +#define PCI_CONFIG_SPACE_SIZE 256 +#endif /* _h_pcicfg_ */ |