diff options
Diffstat (limited to 'drivers/net/wireless/bcmdhd.1.28.23.x.cn_ap6476/include/bcmdefs.h')
| -rwxr-xr-x | drivers/net/wireless/bcmdhd.1.28.23.x.cn_ap6476/include/bcmdefs.h | 270 |
1 files changed, 270 insertions, 0 deletions
diff --git a/drivers/net/wireless/bcmdhd.1.28.23.x.cn_ap6476/include/bcmdefs.h b/drivers/net/wireless/bcmdhd.1.28.23.x.cn_ap6476/include/bcmdefs.h new file mode 100755 index 00000000..00906e35 --- /dev/null +++ b/drivers/net/wireless/bcmdhd.1.28.23.x.cn_ap6476/include/bcmdefs.h @@ -0,0 +1,270 @@ +/* + * Misc system wide definitions + * + * Copyright (C) 1999-2012, Broadcom Corporation + * + * Unless you and Broadcom execute a separate written software license + * agreement governing use of this software, this software is licensed to you + * under the terms of the GNU General Public License version 2 (the "GPL"), + * available at http://www.broadcom.com/licenses/GPLv2.php, with the + * following added to such license: + * + * As a special exception, the copyright holders of this software give you + * permission to link this software with independent modules, and to copy and + * distribute the resulting executable under terms of your choice, provided that + * you also meet, for each linked independent module, the terms and conditions of + * the license of that module. An independent module is a module which is not + * derived from this software. The special exception does not apply to any + * modifications of the software. + * + * Notwithstanding the above, under no circumstances may you combine this + * software in any way with any other Broadcom software provided under a license + * other than the GPL, without Broadcom's express prior written consent. + * + * $Id: bcmdefs.h 316830 2012-02-23 20:29:22Z $ + */ + +#ifndef _bcmdefs_h_ +#define _bcmdefs_h_ + +/* + * One doesn't need to include this file explicitly, gets included automatically if + * typedefs.h is included. + */ + +/* Use BCM_REFERENCE to suppress warnings about intentionally-unused function + * arguments or local variables. + */ +#define BCM_REFERENCE(data) ((void)(data)) + +/* Compile-time assert can be used in place of ASSERT if the expression evaluates + * to a constant at compile time. + */ +#define STATIC_ASSERT(expr) { \ + /* Make sure the expression is constant. */ \ + typedef enum { _STATIC_ASSERT_NOT_CONSTANT = (expr) } _static_assert_e; \ + /* Make sure the expression is true. */ \ + typedef char STATIC_ASSERT_FAIL[(expr) ? 1 : -1]; \ +} + +/* Reclaiming text and data : + * The following macros specify special linker sections that can be reclaimed + * after a system is considered 'up'. + * BCMATTACHFN is also used for detach functions (it's not worth having a BCMDETACHFN, + * as in most cases, the attach function calls the detach function to clean up on error). + */ + +#define bcmreclaimed 0 +#define _data _data +#define _fn _fn +#define BCMPREATTACHDATA(_data) _data +#define BCMPREATTACHFN(_fn) _fn +#define _data _data +#define _fn _fn +#define _fn _fn +#define BCMNMIATTACHFN(_fn) _fn +#define BCMNMIATTACHDATA(_data) _data +#define CONST const +#ifndef BCMFASTPATH +#define BCMFASTPATH +#define BCMFASTPATH_HOST +#endif /* BCMFASTPATH */ + + +/* Put some library data/code into ROM to reduce RAM requirements */ +#define _data _data +#define BCMROMDAT_NAME(_data) _data +#define _fn _fn +#define _fn _fn +#define STATIC static +#define BCMROMDAT_ARYSIZ(data) ARRAYSIZE(data) +#define BCMROMDAT_SIZEOF(data) sizeof(data) +#define BCMROMDAT_APATCH(data) +#define BCMROMDAT_SPATCH(data) + +/* Bus types */ +#define SI_BUS 0 /* SOC Interconnect */ +#define PCI_BUS 1 /* PCI target */ +#define PCMCIA_BUS 2 /* PCMCIA target */ +#define SDIO_BUS 3 /* SDIO target */ +#define JTAG_BUS 4 /* JTAG */ +#define USB_BUS 5 /* USB (does not support R/W REG) */ +#define SPI_BUS 6 /* gSPI target */ +#define RPC_BUS 7 /* RPC target */ + +/* Allows size optimization for single-bus image */ +#ifdef BCMBUSTYPE +#define BUSTYPE(bus) (BCMBUSTYPE) +#else +#define BUSTYPE(bus) (bus) +#endif + +/* Allows size optimization for single-backplane image */ +#ifdef BCMCHIPTYPE +#define CHIPTYPE(bus) (BCMCHIPTYPE) +#else +#define CHIPTYPE(bus) (bus) +#endif + + +/* Allows size optimization for SPROM support */ +#if defined(BCMSPROMBUS) +#define SPROMBUS (BCMSPROMBUS) +#elif defined(SI_PCMCIA_SROM) +#define SPROMBUS (PCMCIA_BUS) +#else +#define SPROMBUS (PCI_BUS) +#endif + +/* Allows size optimization for single-chip image */ +#ifdef BCMCHIPID +#define CHIPID(chip) (BCMCHIPID) +#else +#define CHIPID(chip) (chip) +#endif + +#ifdef BCMCHIPREV +#define CHIPREV(rev) (BCMCHIPREV) +#else +#define CHIPREV(rev) (rev) +#endif + +/* Defines for DMA Address Width - Shared between OSL and HNDDMA */ +#define DMADDR_MASK_32 0x0 /* Address mask for 32-bits */ +#define DMADDR_MASK_30 0xc0000000 /* Address mask for 30-bits */ +#define DMADDR_MASK_0 0xffffffff /* Address mask for 0-bits (hi-part) */ + +#define DMADDRWIDTH_30 30 /* 30-bit addressing capability */ +#define DMADDRWIDTH_32 32 /* 32-bit addressing capability */ +#define DMADDRWIDTH_63 63 /* 64-bit addressing capability */ +#define DMADDRWIDTH_64 64 /* 64-bit addressing capability */ + +#ifdef BCMDMA64OSL +typedef struct { + uint32 loaddr; + uint32 hiaddr; +} dma64addr_t; + +typedef dma64addr_t dmaaddr_t; +#define PHYSADDRHI(_pa) ((_pa).hiaddr) +#define PHYSADDRHISET(_pa, _val) \ + do { \ + (_pa).hiaddr = (_val); \ + } while (0) +#define PHYSADDRLO(_pa) ((_pa).loaddr) +#define PHYSADDRLOSET(_pa, _val) \ + do { \ + (_pa).loaddr = (_val); \ + } while (0) + +#else +typedef unsigned long dmaaddr_t; +#define PHYSADDRHI(_pa) (0) +#define PHYSADDRHISET(_pa, _val) +#define PHYSADDRLO(_pa) ((_pa)) +#define PHYSADDRLOSET(_pa, _val) \ + do { \ + (_pa) = (_val); \ + } while (0) +#endif /* BCMDMA64OSL */ + +/* One physical DMA segment */ +typedef struct { + dmaaddr_t addr; + uint32 length; +} hnddma_seg_t; + +#define MAX_DMA_SEGS 4 + + +typedef struct { + void *oshdmah; /* Opaque handle for OSL to store its information */ + uint origsize; /* Size of the virtual packet */ + uint nsegs; + hnddma_seg_t segs[MAX_DMA_SEGS]; +} hnddma_seg_map_t; + + +/* packet headroom necessary to accommodate the largest header in the system, (i.e TXOFF). + * By doing, we avoid the need to allocate an extra buffer for the header when bridging to WL. + * There is a compile time check in wlc.c which ensure that this value is at least as big + * as TXOFF. This value is used in dma_rxfill (hnddma.c). + */ + +#if defined(BCM_RPC_NOCOPY) || defined(BCM_RCP_TXNOCOPY) +/* add 40 bytes to allow for extra RPC header and info */ +#define BCMEXTRAHDROOM 220 +#else /* BCM_RPC_NOCOPY || BCM_RPC_TXNOCOPY */ +#define BCMEXTRAHDROOM 172 +#endif /* BCM_RPC_NOCOPY || BCM_RPC_TXNOCOPY */ + +/* Packet alignment for most efficient SDIO (can change based on platform) */ +#ifndef SDALIGN +#define SDALIGN 32 +#endif + +/* Headroom required for dongle-to-host communication. Packets allocated + * locally in the dongle (e.g. for CDC ioctls or RNDIS messages) should + * leave this much room in front for low-level message headers which may + * be needed to get across the dongle bus to the host. (These messages + * don't go over the network, so room for the full WL header above would + * be a waste.). +*/ +#define BCMDONGLEHDRSZ 12 +#define BCMDONGLEPADSZ 16 + +#define BCMDONGLEOVERHEAD (BCMDONGLEHDRSZ + BCMDONGLEPADSZ) + + +#if defined(NO_BCMDBG_ASSERT) +# undef BCMDBG_ASSERT +# undef BCMASSERT_LOG +#endif + +#if defined(BCMASSERT_LOG) +#define BCMASSERT_SUPPORT +#endif + +/* Macros for doing definition and get/set of bitfields + * Usage example, e.g. a three-bit field (bits 4-6): + * #define <NAME>_M BITFIELD_MASK(3) + * #define <NAME>_S 4 + * ... + * regval = R_REG(osh, ®s->regfoo); + * field = GFIELD(regval, <NAME>); + * regval = SFIELD(regval, <NAME>, 1); + * W_REG(osh, ®s->regfoo, regval); + */ +#define BITFIELD_MASK(width) \ + (((unsigned)1 << (width)) - 1) +#define GFIELD(val, field) \ + (((val) >> field ## _S) & field ## _M) +#define SFIELD(val, field, bits) \ + (((val) & (~(field ## _M << field ## _S))) | \ + ((unsigned)(bits) << field ## _S)) + +/* define BCMSMALL to remove misc features for memory-constrained environments */ +#ifdef BCMSMALL +#undef BCMSPACE +#define bcmspace FALSE /* if (bcmspace) code is discarded */ +#else +#define BCMSPACE +#define bcmspace TRUE /* if (bcmspace) code is retained */ +#endif + +/* Max. nvram variable table size */ +#define MAXSZ_NVRAM_VARS 4096 + + +/* Max size for reclaimable NVRAM array */ +#ifdef DL_NVRAM +#define NVRAM_ARRAY_MAXSIZE DL_NVRAM +#else +#define NVRAM_ARRAY_MAXSIZE MAXSZ_NVRAM_VARS +#endif /* DL_NVRAM */ + +#ifdef BCMUSBDEV_ENABLED +extern uint32 gFWID; +#endif + +#endif /* _bcmdefs_h_ */ |