diff options
Diffstat (limited to 'drivers/net/phy/icplus.c')
| -rw-r--r-- | drivers/net/phy/icplus.c | 273 |
1 files changed, 273 insertions, 0 deletions
diff --git a/drivers/net/phy/icplus.c b/drivers/net/phy/icplus.c new file mode 100644 index 00000000..5ac46f52 --- /dev/null +++ b/drivers/net/phy/icplus.c @@ -0,0 +1,273 @@ +/* + * Driver for ICPlus PHYs + * + * Copyright (c) 2007 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ +#include <linux/kernel.h> +#include <linux/string.h> +#include <linux/errno.h> +#include <linux/unistd.h> +#include <linux/interrupt.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/skbuff.h> +#include <linux/spinlock.h> +#include <linux/mm.h> +#include <linux/module.h> +#include <linux/mii.h> +#include <linux/ethtool.h> +#include <linux/phy.h> + +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/uaccess.h> + +MODULE_DESCRIPTION("ICPlus IP175C/IP101A/IP101G/IC1001 PHY drivers"); +MODULE_AUTHOR("Michael Barkowski"); +MODULE_LICENSE("GPL"); + +/* IP101A/G - IP1001 */ +#define IP10XX_SPEC_CTRL_STATUS 16 /* Spec. Control Register */ +#define IP1001_SPEC_CTRL_STATUS_2 20 /* IP1001 Spec. Control Reg 2 */ +#define IP1001_PHASE_SEL_MASK 3 /* IP1001 RX/TXPHASE_SEL */ +#define IP1001_APS_ON 11 /* IP1001 APS Mode bit */ +#define IP101A_G_APS_ON 2 /* IP101A/G APS Mode bit */ +#define IP101A_G_IRQ_CONF_STATUS 0x11 /* Conf Info IRQ & Status Reg */ + +static int ip175c_config_init(struct phy_device *phydev) +{ + int err, i; + static int full_reset_performed = 0; + + if (full_reset_performed == 0) { + + /* master reset */ + err = mdiobus_write(phydev->bus, 30, 0, 0x175c); + if (err < 0) + return err; + + /* ensure no bus delays overlap reset period */ + err = mdiobus_read(phydev->bus, 30, 0); + + /* data sheet specifies reset period is 2 msec */ + mdelay(2); + + /* enable IP175C mode */ + err = mdiobus_write(phydev->bus, 29, 31, 0x175c); + if (err < 0) + return err; + + /* Set MII0 speed and duplex (in PHY mode) */ + err = mdiobus_write(phydev->bus, 29, 22, 0x420); + if (err < 0) + return err; + + /* reset switch ports */ + for (i = 0; i < 5; i++) { + err = mdiobus_write(phydev->bus, i, + MII_BMCR, BMCR_RESET); + if (err < 0) + return err; + } + + for (i = 0; i < 5; i++) + err = mdiobus_read(phydev->bus, i, MII_BMCR); + + mdelay(2); + + full_reset_performed = 1; + } + + if (phydev->addr != 4) { + phydev->state = PHY_RUNNING; + phydev->speed = SPEED_100; + phydev->duplex = DUPLEX_FULL; + phydev->link = 1; + netif_carrier_on(phydev->attached_dev); + } + + return 0; +} + +static int ip1xx_reset(struct phy_device *phydev) +{ + int bmcr; + + /* Software Reset PHY */ + bmcr = phy_read(phydev, MII_BMCR); + if (bmcr < 0) + return bmcr; + bmcr |= BMCR_RESET; + bmcr = phy_write(phydev, MII_BMCR, bmcr); + if (bmcr < 0) + return bmcr; + + do { + bmcr = phy_read(phydev, MII_BMCR); + if (bmcr < 0) + return bmcr; + } while (bmcr & BMCR_RESET); + + return 0; +} + +static int ip1001_config_init(struct phy_device *phydev) +{ + int c; + + c = ip1xx_reset(phydev); + if (c < 0) + return c; + + /* Enable Auto Power Saving mode */ + c = phy_read(phydev, IP1001_SPEC_CTRL_STATUS_2); + if (c < 0) + return c; + c |= IP1001_APS_ON; + c = phy_write(phydev, IP1001_SPEC_CTRL_STATUS_2, c); + if (c < 0) + return c; + + if (phydev->interface == PHY_INTERFACE_MODE_RGMII) { + /* Additional delay (2ns) used to adjust RX clock phase + * at RGMII interface */ + c = phy_read(phydev, IP10XX_SPEC_CTRL_STATUS); + if (c < 0) + return c; + + c |= IP1001_PHASE_SEL_MASK; + c = phy_write(phydev, IP10XX_SPEC_CTRL_STATUS, c); + if (c < 0) + return c; + } + + return 0; +} + +static int ip101a_g_config_init(struct phy_device *phydev) +{ + int c; + + c = ip1xx_reset(phydev); + if (c < 0) + return c; + + /* Enable Auto Power Saving mode */ + c = phy_read(phydev, IP10XX_SPEC_CTRL_STATUS); + c |= IP101A_G_APS_ON; + + return phy_write(phydev, IP10XX_SPEC_CTRL_STATUS, c); +} + +static int ip175c_read_status(struct phy_device *phydev) +{ + if (phydev->addr == 4) /* WAN port */ + genphy_read_status(phydev); + else + /* Don't need to read status for switch ports */ + phydev->irq = PHY_IGNORE_INTERRUPT; + + return 0; +} + +static int ip175c_config_aneg(struct phy_device *phydev) +{ + if (phydev->addr == 4) /* WAN port */ + genphy_config_aneg(phydev); + + return 0; +} + +static int ip101a_g_ack_interrupt(struct phy_device *phydev) +{ + int err = phy_read(phydev, IP101A_G_IRQ_CONF_STATUS); + if (err < 0) + return err; + + return 0; +} + +static struct phy_driver ip175c_driver = { + .phy_id = 0x02430d80, + .name = "ICPlus IP175C", + .phy_id_mask = 0x0ffffff0, + .features = PHY_BASIC_FEATURES, + .config_init = &ip175c_config_init, + .config_aneg = &ip175c_config_aneg, + .read_status = &ip175c_read_status, + .suspend = genphy_suspend, + .resume = genphy_resume, + .driver = { .owner = THIS_MODULE,}, +}; + +static struct phy_driver ip1001_driver = { + .phy_id = 0x02430d90, + .name = "ICPlus IP1001", + .phy_id_mask = 0x0ffffff0, + .features = PHY_GBIT_FEATURES | SUPPORTED_Pause | + SUPPORTED_Asym_Pause, + .config_init = &ip1001_config_init, + .config_aneg = &genphy_config_aneg, + .read_status = &genphy_read_status, + .suspend = genphy_suspend, + .resume = genphy_resume, + .driver = { .owner = THIS_MODULE,}, +}; + +static struct phy_driver ip101a_g_driver = { + .phy_id = 0x02430c54, + .name = "ICPlus IP101A/G", + .phy_id_mask = 0x0ffffff0, + .features = PHY_BASIC_FEATURES | SUPPORTED_Pause | + SUPPORTED_Asym_Pause, + .flags = PHY_HAS_INTERRUPT, + .ack_interrupt = ip101a_g_ack_interrupt, + .config_init = &ip101a_g_config_init, + .config_aneg = &genphy_config_aneg, + .read_status = &genphy_read_status, + .suspend = genphy_suspend, + .resume = genphy_resume, + .driver = { .owner = THIS_MODULE,}, +}; + +static int __init icplus_init(void) +{ + int ret = 0; + + ret = phy_driver_register(&ip1001_driver); + if (ret < 0) + return -ENODEV; + + ret = phy_driver_register(&ip101a_g_driver); + if (ret < 0) + return -ENODEV; + + return phy_driver_register(&ip175c_driver); +} + +static void __exit icplus_exit(void) +{ + phy_driver_unregister(&ip1001_driver); + phy_driver_unregister(&ip101a_g_driver); + phy_driver_unregister(&ip175c_driver); +} + +module_init(icplus_init); +module_exit(icplus_exit); + +static struct mdio_device_id __maybe_unused icplus_tbl[] = { + { 0x02430d80, 0x0ffffff0 }, + { 0x02430d90, 0x0ffffff0 }, + { 0x02430c54, 0x0ffffff0 }, + { } +}; + +MODULE_DEVICE_TABLE(mdio, icplus_tbl); |