diff options
Diffstat (limited to 'drivers/media/dvb/ttpci/budget-ci.c')
| -rw-r--r-- | drivers/media/dvb/ttpci/budget-ci.c | 1591 |
1 files changed, 1591 insertions, 0 deletions
diff --git a/drivers/media/dvb/ttpci/budget-ci.c b/drivers/media/dvb/ttpci/budget-ci.c new file mode 100644 index 00000000..98e52417 --- /dev/null +++ b/drivers/media/dvb/ttpci/budget-ci.c @@ -0,0 +1,1591 @@ +/* + * budget-ci.c: driver for the SAA7146 based Budget DVB cards + * + * Compiled from various sources by Michael Hunold <michael@mihu.de> + * + * msp430 IR support contributed by Jack Thomasson <jkt@Helius.COM> + * partially based on the Siemens DVB driver by Ralph+Marcus Metzler + * + * CI interface support (c) 2004 Andrew de Quincey <adq_dvb@lidskialf.net> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * Or, point your browser to http://www.gnu.org/copyleft/gpl.html + * + * + * the project's page is at http://www.linuxtv.org/ + */ + +#include <linux/module.h> +#include <linux/errno.h> +#include <linux/slab.h> +#include <linux/interrupt.h> +#include <linux/spinlock.h> +#include <media/rc-core.h> + +#include "budget.h" + +#include "dvb_ca_en50221.h" +#include "stv0299.h" +#include "stv0297.h" +#include "tda1004x.h" +#include "stb0899_drv.h" +#include "stb0899_reg.h" +#include "stb0899_cfg.h" +#include "stb6100.h" +#include "stb6100_cfg.h" +#include "lnbp21.h" +#include "bsbe1.h" +#include "bsru6.h" +#include "tda1002x.h" +#include "tda827x.h" +#include "bsbe1-d01a.h" + +#define MODULE_NAME "budget_ci" + +/* + * Regarding DEBIADDR_IR: + * Some CI modules hang if random addresses are read. + * Using address 0x4000 for the IR read means that we + * use the same address as for CI version, which should + * be a safe default. + */ +#define DEBIADDR_IR 0x4000 +#define DEBIADDR_CICONTROL 0x0000 +#define DEBIADDR_CIVERSION 0x4000 +#define DEBIADDR_IO 0x1000 +#define DEBIADDR_ATTR 0x3000 + +#define CICONTROL_RESET 0x01 +#define CICONTROL_ENABLETS 0x02 +#define CICONTROL_CAMDETECT 0x08 + +#define DEBICICTL 0x00420000 +#define DEBICICAM 0x02420000 + +#define SLOTSTATUS_NONE 1 +#define SLOTSTATUS_PRESENT 2 +#define SLOTSTATUS_RESET 4 +#define SLOTSTATUS_READY 8 +#define SLOTSTATUS_OCCUPIED (SLOTSTATUS_PRESENT|SLOTSTATUS_RESET|SLOTSTATUS_READY) + +/* RC5 device wildcard */ +#define IR_DEVICE_ANY 255 + +static int rc5_device = -1; +module_param(rc5_device, int, 0644); +MODULE_PARM_DESC(rc5_device, "only IR commands to given RC5 device (device = 0 - 31, any device = 255, default: autodetect)"); + +static int ir_debug; +module_param(ir_debug, int, 0644); +MODULE_PARM_DESC(ir_debug, "enable debugging information for IR decoding"); + +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + +struct budget_ci_ir { + struct rc_dev *dev; + struct tasklet_struct msp430_irq_tasklet; + char name[72]; /* 40 + 32 for (struct saa7146_dev).name */ + char phys[32]; + int rc5_device; + u32 ir_key; + bool have_command; + bool full_rc5; /* Outputs a full RC5 code */ +}; + +struct budget_ci { + struct budget budget; + struct tasklet_struct ciintf_irq_tasklet; + int slot_status; + int ci_irq; + struct dvb_ca_en50221 ca; + struct budget_ci_ir ir; + u8 tuner_pll_address; /* used for philips_tdm1316l configs */ +}; + +static void msp430_ir_interrupt(unsigned long data) +{ + struct budget_ci *budget_ci = (struct budget_ci *) data; + struct rc_dev *dev = budget_ci->ir.dev; + u32 command = ttpci_budget_debiread(&budget_ci->budget, DEBINOSWAP, DEBIADDR_IR, 2, 1, 0) >> 8; + + /* + * The msp430 chip can generate two different bytes, command and device + * + * type1: X1CCCCCC, C = command bits (0 - 63) + * type2: X0TDDDDD, D = device bits (0 - 31), T = RC5 toggle bit + * + * Each signal from the remote control can generate one or more command + * bytes and one or more device bytes. For the repeated bytes, the + * highest bit (X) is set. The first command byte is always generated + * before the first device byte. Other than that, no specific order + * seems to apply. To make life interesting, bytes can also be lost. + * + * Only when we have a command and device byte, a keypress is + * generated. + */ + + if (ir_debug) + printk("budget_ci: received byte 0x%02x\n", command); + + /* Remove repeat bit, we use every command */ + command = command & 0x7f; + + /* Is this a RC5 command byte? */ + if (command & 0x40) { + budget_ci->ir.have_command = true; + budget_ci->ir.ir_key = command & 0x3f; + return; + } + + /* It's a RC5 device byte */ + if (!budget_ci->ir.have_command) + return; + budget_ci->ir.have_command = false; + + if (budget_ci->ir.rc5_device != IR_DEVICE_ANY && + budget_ci->ir.rc5_device != (command & 0x1f)) + return; + + if (budget_ci->ir.full_rc5) { + rc_keydown(dev, + budget_ci->ir.rc5_device <<8 | budget_ci->ir.ir_key, + (command & 0x20) ? 1 : 0); + return; + } + + /* FIXME: We should generate complete scancodes for all devices */ + rc_keydown(dev, budget_ci->ir.ir_key, (command & 0x20) ? 1 : 0); +} + +static int msp430_ir_init(struct budget_ci *budget_ci) +{ + struct saa7146_dev *saa = budget_ci->budget.dev; + struct rc_dev *dev; + int error; + + dev = rc_allocate_device(); + if (!dev) { + printk(KERN_ERR "budget_ci: IR interface initialisation failed\n"); + return -ENOMEM; + } + + snprintf(budget_ci->ir.name, sizeof(budget_ci->ir.name), + "Budget-CI dvb ir receiver %s", saa->name); + snprintf(budget_ci->ir.phys, sizeof(budget_ci->ir.phys), + "pci-%s/ir0", pci_name(saa->pci)); + + dev->driver_name = MODULE_NAME; + dev->input_name = budget_ci->ir.name; + dev->input_phys = budget_ci->ir.phys; + dev->input_id.bustype = BUS_PCI; + dev->input_id.version = 1; + if (saa->pci->subsystem_vendor) { + dev->input_id.vendor = saa->pci->subsystem_vendor; + dev->input_id.product = saa->pci->subsystem_device; + } else { + dev->input_id.vendor = saa->pci->vendor; + dev->input_id.product = saa->pci->device; + } + dev->dev.parent = &saa->pci->dev; + + if (rc5_device < 0) + budget_ci->ir.rc5_device = IR_DEVICE_ANY; + else + budget_ci->ir.rc5_device = rc5_device; + + /* Select keymap and address */ + switch (budget_ci->budget.dev->pci->subsystem_device) { + case 0x100c: + case 0x100f: + case 0x1011: + case 0x1012: + /* The hauppauge keymap is a superset of these remotes */ + dev->map_name = RC_MAP_HAUPPAUGE; + budget_ci->ir.full_rc5 = true; + + if (rc5_device < 0) + budget_ci->ir.rc5_device = 0x1f; + break; + case 0x1010: + case 0x1017: + case 0x1019: + case 0x101a: + case 0x101b: + /* for the Technotrend 1500 bundled remote */ + dev->map_name = RC_MAP_TT_1500; + break; + default: + /* unknown remote */ + dev->map_name = RC_MAP_BUDGET_CI_OLD; + break; + } + if (!budget_ci->ir.full_rc5) + dev->scanmask = 0xff; + + error = rc_register_device(dev); + if (error) { + printk(KERN_ERR "budget_ci: could not init driver for IR device (code %d)\n", error); + rc_free_device(dev); + return error; + } + + budget_ci->ir.dev = dev; + + tasklet_init(&budget_ci->ir.msp430_irq_tasklet, msp430_ir_interrupt, + (unsigned long) budget_ci); + + SAA7146_IER_ENABLE(saa, MASK_06); + saa7146_setgpio(saa, 3, SAA7146_GPIO_IRQHI); + + return 0; +} + +static void msp430_ir_deinit(struct budget_ci *budget_ci) +{ + struct saa7146_dev *saa = budget_ci->budget.dev; + + SAA7146_IER_DISABLE(saa, MASK_06); + saa7146_setgpio(saa, 3, SAA7146_GPIO_INPUT); + tasklet_kill(&budget_ci->ir.msp430_irq_tasklet); + + rc_unregister_device(budget_ci->ir.dev); +} + +static int ciintf_read_attribute_mem(struct dvb_ca_en50221 *ca, int slot, int address) +{ + struct budget_ci *budget_ci = (struct budget_ci *) ca->data; + + if (slot != 0) + return -EINVAL; + + return ttpci_budget_debiread(&budget_ci->budget, DEBICICAM, + DEBIADDR_ATTR | (address & 0xfff), 1, 1, 0); +} + +static int ciintf_write_attribute_mem(struct dvb_ca_en50221 *ca, int slot, int address, u8 value) +{ + struct budget_ci *budget_ci = (struct budget_ci *) ca->data; + + if (slot != 0) + return -EINVAL; + + return ttpci_budget_debiwrite(&budget_ci->budget, DEBICICAM, + DEBIADDR_ATTR | (address & 0xfff), 1, value, 1, 0); +} + +static int ciintf_read_cam_control(struct dvb_ca_en50221 *ca, int slot, u8 address) +{ + struct budget_ci *budget_ci = (struct budget_ci *) ca->data; + + if (slot != 0) + return -EINVAL; + + return ttpci_budget_debiread(&budget_ci->budget, DEBICICAM, + DEBIADDR_IO | (address & 3), 1, 1, 0); +} + +static int ciintf_write_cam_control(struct dvb_ca_en50221 *ca, int slot, u8 address, u8 value) +{ + struct budget_ci *budget_ci = (struct budget_ci *) ca->data; + + if (slot != 0) + return -EINVAL; + + return ttpci_budget_debiwrite(&budget_ci->budget, DEBICICAM, + DEBIADDR_IO | (address & 3), 1, value, 1, 0); +} + +static int ciintf_slot_reset(struct dvb_ca_en50221 *ca, int slot) +{ + struct budget_ci *budget_ci = (struct budget_ci *) ca->data; + struct saa7146_dev *saa = budget_ci->budget.dev; + + if (slot != 0) + return -EINVAL; + + if (budget_ci->ci_irq) { + // trigger on RISING edge during reset so we know when READY is re-asserted + saa7146_setgpio(saa, 0, SAA7146_GPIO_IRQHI); + } + budget_ci->slot_status = SLOTSTATUS_RESET; + ttpci_budget_debiwrite(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1, 0, 1, 0); + msleep(1); + ttpci_budget_debiwrite(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1, + CICONTROL_RESET, 1, 0); + + saa7146_setgpio(saa, 1, SAA7146_GPIO_OUTHI); + ttpci_budget_set_video_port(saa, BUDGET_VIDEO_PORTB); + return 0; +} + +static int ciintf_slot_shutdown(struct dvb_ca_en50221 *ca, int slot) +{ + struct budget_ci *budget_ci = (struct budget_ci *) ca->data; + struct saa7146_dev *saa = budget_ci->budget.dev; + + if (slot != 0) + return -EINVAL; + + saa7146_setgpio(saa, 1, SAA7146_GPIO_OUTHI); + ttpci_budget_set_video_port(saa, BUDGET_VIDEO_PORTB); + return 0; +} + +static int ciintf_slot_ts_enable(struct dvb_ca_en50221 *ca, int slot) +{ + struct budget_ci *budget_ci = (struct budget_ci *) ca->data; + struct saa7146_dev *saa = budget_ci->budget.dev; + int tmp; + + if (slot != 0) + return -EINVAL; + + saa7146_setgpio(saa, 1, SAA7146_GPIO_OUTLO); + + tmp = ttpci_budget_debiread(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1, 1, 0); + ttpci_budget_debiwrite(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1, + tmp | CICONTROL_ENABLETS, 1, 0); + + ttpci_budget_set_video_port(saa, BUDGET_VIDEO_PORTA); + return 0; +} + +static void ciintf_interrupt(unsigned long data) +{ + struct budget_ci *budget_ci = (struct budget_ci *) data; + struct saa7146_dev *saa = budget_ci->budget.dev; + unsigned int flags; + + // ensure we don't get spurious IRQs during initialisation + if (!budget_ci->budget.ci_present) + return; + + // read the CAM status + flags = ttpci_budget_debiread(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1, 1, 0); + if (flags & CICONTROL_CAMDETECT) { + + // GPIO should be set to trigger on falling edge if a CAM is present + saa7146_setgpio(saa, 0, SAA7146_GPIO_IRQLO); + + if (budget_ci->slot_status & SLOTSTATUS_NONE) { + // CAM insertion IRQ + budget_ci->slot_status = SLOTSTATUS_PRESENT; + dvb_ca_en50221_camchange_irq(&budget_ci->ca, 0, + DVB_CA_EN50221_CAMCHANGE_INSERTED); + + } else if (budget_ci->slot_status & SLOTSTATUS_RESET) { + // CAM ready (reset completed) + budget_ci->slot_status = SLOTSTATUS_READY; + dvb_ca_en50221_camready_irq(&budget_ci->ca, 0); + + } else if (budget_ci->slot_status & SLOTSTATUS_READY) { + // FR/DA IRQ + dvb_ca_en50221_frda_irq(&budget_ci->ca, 0); + } + } else { + + // trigger on rising edge if a CAM is not present - when a CAM is inserted, we + // only want to get the IRQ when it sets READY. If we trigger on the falling edge, + // the CAM might not actually be ready yet. + saa7146_setgpio(saa, 0, SAA7146_GPIO_IRQHI); + + // generate a CAM removal IRQ if we haven't already + if (budget_ci->slot_status & SLOTSTATUS_OCCUPIED) { + // CAM removal IRQ + budget_ci->slot_status = SLOTSTATUS_NONE; + dvb_ca_en50221_camchange_irq(&budget_ci->ca, 0, + DVB_CA_EN50221_CAMCHANGE_REMOVED); + } + } +} + +static int ciintf_poll_slot_status(struct dvb_ca_en50221 *ca, int slot, int open) +{ + struct budget_ci *budget_ci = (struct budget_ci *) ca->data; + unsigned int flags; + + // ensure we don't get spurious IRQs during initialisation + if (!budget_ci->budget.ci_present) + return -EINVAL; + + // read the CAM status + flags = ttpci_budget_debiread(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1, 1, 0); + if (flags & CICONTROL_CAMDETECT) { + // mark it as present if it wasn't before + if (budget_ci->slot_status & SLOTSTATUS_NONE) { + budget_ci->slot_status = SLOTSTATUS_PRESENT; + } + + // during a RESET, we check if we can read from IO memory to see when CAM is ready + if (budget_ci->slot_status & SLOTSTATUS_RESET) { + if (ciintf_read_attribute_mem(ca, slot, 0) == 0x1d) { + budget_ci->slot_status = SLOTSTATUS_READY; + } + } + } else { + budget_ci->slot_status = SLOTSTATUS_NONE; + } + + if (budget_ci->slot_status != SLOTSTATUS_NONE) { + if (budget_ci->slot_status & SLOTSTATUS_READY) { + return DVB_CA_EN50221_POLL_CAM_PRESENT | DVB_CA_EN50221_POLL_CAM_READY; + } + return DVB_CA_EN50221_POLL_CAM_PRESENT; + } + + return 0; +} + +static int ciintf_init(struct budget_ci *budget_ci) +{ + struct saa7146_dev *saa = budget_ci->budget.dev; + int flags; + int result; + int ci_version; + int ca_flags; + + memset(&budget_ci->ca, 0, sizeof(struct dvb_ca_en50221)); + + // enable DEBI pins + saa7146_write(saa, MC1, MASK_27 | MASK_11); + + // test if it is there + ci_version = ttpci_budget_debiread(&budget_ci->budget, DEBICICTL, DEBIADDR_CIVERSION, 1, 1, 0); + if ((ci_version & 0xa0) != 0xa0) { + result = -ENODEV; + goto error; + } + + // determine whether a CAM is present or not + flags = ttpci_budget_debiread(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1, 1, 0); + budget_ci->slot_status = SLOTSTATUS_NONE; + if (flags & CICONTROL_CAMDETECT) + budget_ci->slot_status = SLOTSTATUS_PRESENT; + + // version 0xa2 of the CI firmware doesn't generate interrupts + if (ci_version == 0xa2) { + ca_flags = 0; + budget_ci->ci_irq = 0; + } else { + ca_flags = DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE | + DVB_CA_EN50221_FLAG_IRQ_FR | + DVB_CA_EN50221_FLAG_IRQ_DA; + budget_ci->ci_irq = 1; + } + + // register CI interface + budget_ci->ca.owner = THIS_MODULE; + budget_ci->ca.read_attribute_mem = ciintf_read_attribute_mem; + budget_ci->ca.write_attribute_mem = ciintf_write_attribute_mem; + budget_ci->ca.read_cam_control = ciintf_read_cam_control; + budget_ci->ca.write_cam_control = ciintf_write_cam_control; + budget_ci->ca.slot_reset = ciintf_slot_reset; + budget_ci->ca.slot_shutdown = ciintf_slot_shutdown; + budget_ci->ca.slot_ts_enable = ciintf_slot_ts_enable; + budget_ci->ca.poll_slot_status = ciintf_poll_slot_status; + budget_ci->ca.data = budget_ci; + if ((result = dvb_ca_en50221_init(&budget_ci->budget.dvb_adapter, + &budget_ci->ca, + ca_flags, 1)) != 0) { + printk("budget_ci: CI interface detected, but initialisation failed.\n"); + goto error; + } + + // Setup CI slot IRQ + if (budget_ci->ci_irq) { + tasklet_init(&budget_ci->ciintf_irq_tasklet, ciintf_interrupt, (unsigned long) budget_ci); + if (budget_ci->slot_status != SLOTSTATUS_NONE) { + saa7146_setgpio(saa, 0, SAA7146_GPIO_IRQLO); + } else { + saa7146_setgpio(saa, 0, SAA7146_GPIO_IRQHI); + } + SAA7146_IER_ENABLE(saa, MASK_03); + } + + // enable interface + ttpci_budget_debiwrite(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1, + CICONTROL_RESET, 1, 0); + + // success! + printk("budget_ci: CI interface initialised\n"); + budget_ci->budget.ci_present = 1; + + // forge a fake CI IRQ so the CAM state is setup correctly + if (budget_ci->ci_irq) { + flags = DVB_CA_EN50221_CAMCHANGE_REMOVED; + if (budget_ci->slot_status != SLOTSTATUS_NONE) + flags = DVB_CA_EN50221_CAMCHANGE_INSERTED; + dvb_ca_en50221_camchange_irq(&budget_ci->ca, 0, flags); + } + + return 0; + +error: + saa7146_write(saa, MC1, MASK_27); + return result; +} + +static void ciintf_deinit(struct budget_ci *budget_ci) +{ + struct saa7146_dev *saa = budget_ci->budget.dev; + + // disable CI interrupts + if (budget_ci->ci_irq) { + SAA7146_IER_DISABLE(saa, MASK_03); + saa7146_setgpio(saa, 0, SAA7146_GPIO_INPUT); + tasklet_kill(&budget_ci->ciintf_irq_tasklet); + } + + // reset interface + ttpci_budget_debiwrite(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1, 0, 1, 0); + msleep(1); + ttpci_budget_debiwrite(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1, + CICONTROL_RESET, 1, 0); + + // disable TS data stream to CI interface + saa7146_setgpio(saa, 1, SAA7146_GPIO_INPUT); + + // release the CA device + dvb_ca_en50221_release(&budget_ci->ca); + + // disable DEBI pins + saa7146_write(saa, MC1, MASK_27); +} + +static void budget_ci_irq(struct saa7146_dev *dev, u32 * isr) +{ + struct budget_ci *budget_ci = (struct budget_ci *) dev->ext_priv; + + dprintk(8, "dev: %p, budget_ci: %p\n", dev, budget_ci); + + if (*isr & MASK_06) + tasklet_schedule(&budget_ci->ir.msp430_irq_tasklet); + + if (*isr & MASK_10) + ttpci_budget_irq10_handler(dev, isr); + + if ((*isr & MASK_03) && (budget_ci->budget.ci_present) && (budget_ci->ci_irq)) + tasklet_schedule(&budget_ci->ciintf_irq_tasklet); +} + +static u8 philips_su1278_tt_inittab[] = { + 0x01, 0x0f, + 0x02, 0x30, + 0x03, 0x00, + 0x04, 0x5b, + 0x05, 0x85, + 0x06, 0x02, + 0x07, 0x00, + 0x08, 0x02, + 0x09, 0x00, + 0x0C, 0x01, + 0x0D, 0x81, + 0x0E, 0x44, + 0x0f, 0x14, + 0x10, 0x3c, + 0x11, 0x84, + 0x12, 0xda, + 0x13, 0x97, + 0x14, 0x95, + 0x15, 0xc9, + 0x16, 0x19, + 0x17, 0x8c, + 0x18, 0x59, + 0x19, 0xf8, + 0x1a, 0xfe, + 0x1c, 0x7f, + 0x1d, 0x00, + 0x1e, 0x00, + 0x1f, 0x50, + 0x20, 0x00, + 0x21, 0x00, + 0x22, 0x00, + 0x23, 0x00, + 0x28, 0x00, + 0x29, 0x28, + 0x2a, 0x14, + 0x2b, 0x0f, + 0x2c, 0x09, + 0x2d, 0x09, + 0x31, 0x1f, + 0x32, 0x19, + 0x33, 0xfc, + 0x34, 0x93, + 0xff, 0xff +}; + +static int philips_su1278_tt_set_symbol_rate(struct dvb_frontend *fe, u32 srate, u32 ratio) +{ + stv0299_writereg(fe, 0x0e, 0x44); + if (srate >= 10000000) { + stv0299_writereg(fe, 0x13, 0x97); + stv0299_writereg(fe, 0x14, 0x95); + stv0299_writereg(fe, 0x15, 0xc9); + stv0299_writereg(fe, 0x17, 0x8c); + stv0299_writereg(fe, 0x1a, 0xfe); + stv0299_writereg(fe, 0x1c, 0x7f); + stv0299_writereg(fe, 0x2d, 0x09); + } else { + stv0299_writereg(fe, 0x13, 0x99); + stv0299_writereg(fe, 0x14, 0x8d); + stv0299_writereg(fe, 0x15, 0xce); + stv0299_writereg(fe, 0x17, 0x43); + stv0299_writereg(fe, 0x1a, 0x1d); + stv0299_writereg(fe, 0x1c, 0x12); + stv0299_writereg(fe, 0x2d, 0x05); + } + stv0299_writereg(fe, 0x0e, 0x23); + stv0299_writereg(fe, 0x0f, 0x94); + stv0299_writereg(fe, 0x10, 0x39); + stv0299_writereg(fe, 0x15, 0xc9); + + stv0299_writereg(fe, 0x1f, (ratio >> 16) & 0xff); + stv0299_writereg(fe, 0x20, (ratio >> 8) & 0xff); + stv0299_writereg(fe, 0x21, (ratio) & 0xf0); + + return 0; +} + +static int philips_su1278_tt_tuner_set_params(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *p = &fe->dtv_property_cache; + struct budget_ci *budget_ci = (struct budget_ci *) fe->dvb->priv; + u32 div; + u8 buf[4]; + struct i2c_msg msg = {.addr = 0x60,.flags = 0,.buf = buf,.len = sizeof(buf) }; + + if ((p->frequency < 950000) || (p->frequency > 2150000)) + return -EINVAL; + + div = (p->frequency + (500 - 1)) / 500; /* round correctly */ + buf[0] = (div >> 8) & 0x7f; + buf[1] = div & 0xff; + buf[2] = 0x80 | ((div & 0x18000) >> 10) | 2; + buf[3] = 0x20; + + if (p->symbol_rate < 4000000) + buf[3] |= 1; + + if (p->frequency < 1250000) + buf[3] |= 0; + else if (p->frequency < 1550000) + buf[3] |= 0x40; + else if (p->frequency < 2050000) + buf[3] |= 0x80; + else if (p->frequency < 2150000) + buf[3] |= 0xC0; + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + if (i2c_transfer(&budget_ci->budget.i2c_adap, &msg, 1) != 1) + return -EIO; + return 0; +} + +static struct stv0299_config philips_su1278_tt_config = { + + .demod_address = 0x68, + .inittab = philips_su1278_tt_inittab, + .mclk = 64000000UL, + .invert = 0, + .skip_reinit = 1, + .lock_output = STV0299_LOCKOUTPUT_1, + .volt13_op0_op1 = STV0299_VOLT13_OP1, + .min_delay_ms = 50, + .set_symbol_rate = philips_su1278_tt_set_symbol_rate, +}; + + + +static int philips_tdm1316l_tuner_init(struct dvb_frontend *fe) +{ + struct budget_ci *budget_ci = (struct budget_ci *) fe->dvb->priv; + static u8 td1316_init[] = { 0x0b, 0xf5, 0x85, 0xab }; + static u8 disable_mc44BC374c[] = { 0x1d, 0x74, 0xa0, 0x68 }; + struct i2c_msg tuner_msg = {.addr = budget_ci->tuner_pll_address,.flags = 0,.buf = td1316_init,.len = + sizeof(td1316_init) }; + + // setup PLL configuration + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + if (i2c_transfer(&budget_ci->budget.i2c_adap, &tuner_msg, 1) != 1) + return -EIO; + msleep(1); + + // disable the mc44BC374c (do not check for errors) + tuner_msg.addr = 0x65; + tuner_msg.buf = disable_mc44BC374c; + tuner_msg.len = sizeof(disable_mc44BC374c); + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + if (i2c_transfer(&budget_ci->budget.i2c_adap, &tuner_msg, 1) != 1) { + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + i2c_transfer(&budget_ci->budget.i2c_adap, &tuner_msg, 1); + } + + return 0; +} + +static int philips_tdm1316l_tuner_set_params(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *p = &fe->dtv_property_cache; + struct budget_ci *budget_ci = (struct budget_ci *) fe->dvb->priv; + u8 tuner_buf[4]; + struct i2c_msg tuner_msg = {.addr = budget_ci->tuner_pll_address,.flags = 0,.buf = tuner_buf,.len = sizeof(tuner_buf) }; + int tuner_frequency = 0; + u8 band, cp, filter; + + // determine charge pump + tuner_frequency = p->frequency + 36130000; + if (tuner_frequency < 87000000) + return -EINVAL; + else if (tuner_frequency < 130000000) + cp = 3; + else if (tuner_frequency < 160000000) + cp = 5; + else if (tuner_frequency < 200000000) + cp = 6; + else if (tuner_frequency < 290000000) + cp = 3; + else if (tuner_frequency < 420000000) + cp = 5; + else if (tuner_frequency < 480000000) + cp = 6; + else if (tuner_frequency < 620000000) + cp = 3; + else if (tuner_frequency < 830000000) + cp = 5; + else if (tuner_frequency < 895000000) + cp = 7; + else + return -EINVAL; + + // determine band + if (p->frequency < 49000000) + return -EINVAL; + else if (p->frequency < 159000000) + band = 1; + else if (p->frequency < 444000000) + band = 2; + else if (p->frequency < 861000000) + band = 4; + else + return -EINVAL; + + // setup PLL filter and TDA9889 + switch (p->bandwidth_hz) { + case 6000000: + tda1004x_writereg(fe, 0x0C, 0x14); + filter = 0; + break; + + case 7000000: + tda1004x_writereg(fe, 0x0C, 0x80); + filter = 0; + break; + + case 8000000: + tda1004x_writereg(fe, 0x0C, 0x14); + filter = 1; + break; + + default: + return -EINVAL; + } + + // calculate divisor + // ((36130000+((1000000/6)/2)) + Finput)/(1000000/6) + tuner_frequency = (((p->frequency / 1000) * 6) + 217280) / 1000; + + // setup tuner buffer + tuner_buf[0] = tuner_frequency >> 8; + tuner_buf[1] = tuner_frequency & 0xff; + tuner_buf[2] = 0xca; + tuner_buf[3] = (cp << 5) | (filter << 3) | band; + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + if (i2c_transfer(&budget_ci->budget.i2c_adap, &tuner_msg, 1) != 1) + return -EIO; + + msleep(1); + return 0; +} + +static int philips_tdm1316l_request_firmware(struct dvb_frontend *fe, + const struct firmware **fw, char *name) +{ + struct budget_ci *budget_ci = (struct budget_ci *) fe->dvb->priv; + + return request_firmware(fw, name, &budget_ci->budget.dev->pci->dev); +} + +static struct tda1004x_config philips_tdm1316l_config = { + + .demod_address = 0x8, + .invert = 0, + .invert_oclk = 0, + .xtal_freq = TDA10046_XTAL_4M, + .agc_config = TDA10046_AGC_DEFAULT, + .if_freq = TDA10046_FREQ_3617, + .request_firmware = philips_tdm1316l_request_firmware, +}; + +static struct tda1004x_config philips_tdm1316l_config_invert = { + + .demod_address = 0x8, + .invert = 1, + .invert_oclk = 0, + .xtal_freq = TDA10046_XTAL_4M, + .agc_config = TDA10046_AGC_DEFAULT, + .if_freq = TDA10046_FREQ_3617, + .request_firmware = philips_tdm1316l_request_firmware, +}; + +static int dvbc_philips_tdm1316l_tuner_set_params(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *p = &fe->dtv_property_cache; + struct budget_ci *budget_ci = (struct budget_ci *) fe->dvb->priv; + u8 tuner_buf[5]; + struct i2c_msg tuner_msg = {.addr = budget_ci->tuner_pll_address, + .flags = 0, + .buf = tuner_buf, + .len = sizeof(tuner_buf) }; + int tuner_frequency = 0; + u8 band, cp, filter; + + // determine charge pump + tuner_frequency = p->frequency + 36125000; + if (tuner_frequency < 87000000) + return -EINVAL; + else if (tuner_frequency < 130000000) { + cp = 3; + band = 1; + } else if (tuner_frequency < 160000000) { + cp = 5; + band = 1; + } else if (tuner_frequency < 200000000) { + cp = 6; + band = 1; + } else if (tuner_frequency < 290000000) { + cp = 3; + band = 2; + } else if (tuner_frequency < 420000000) { + cp = 5; + band = 2; + } else if (tuner_frequency < 480000000) { + cp = 6; + band = 2; + } else if (tuner_frequency < 620000000) { + cp = 3; + band = 4; + } else if (tuner_frequency < 830000000) { + cp = 5; + band = 4; + } else if (tuner_frequency < 895000000) { + cp = 7; + band = 4; + } else + return -EINVAL; + + // assume PLL filter should always be 8MHz for the moment. + filter = 1; + + // calculate divisor + tuner_frequency = (p->frequency + 36125000 + (62500/2)) / 62500; + + // setup tuner buffer + tuner_buf[0] = tuner_frequency >> 8; + tuner_buf[1] = tuner_frequency & 0xff; + tuner_buf[2] = 0xc8; + tuner_buf[3] = (cp << 5) | (filter << 3) | band; + tuner_buf[4] = 0x80; + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + if (i2c_transfer(&budget_ci->budget.i2c_adap, &tuner_msg, 1) != 1) + return -EIO; + + msleep(50); + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + if (i2c_transfer(&budget_ci->budget.i2c_adap, &tuner_msg, 1) != 1) + return -EIO; + + msleep(1); + + return 0; +} + +static u8 dvbc_philips_tdm1316l_inittab[] = { + 0x80, 0x01, + 0x80, 0x00, + 0x81, 0x01, + 0x81, 0x00, + 0x00, 0x09, + 0x01, 0x69, + 0x03, 0x00, + 0x04, 0x00, + 0x07, 0x00, + 0x08, 0x00, + 0x20, 0x00, + 0x21, 0x40, + 0x22, 0x00, + 0x23, 0x00, + 0x24, 0x40, + 0x25, 0x88, + 0x30, 0xff, + 0x31, 0x00, + 0x32, 0xff, + 0x33, 0x00, + 0x34, 0x50, + 0x35, 0x7f, + 0x36, 0x00, + 0x37, 0x20, + 0x38, 0x00, + 0x40, 0x1c, + 0x41, 0xff, + 0x42, 0x29, + 0x43, 0x20, + 0x44, 0xff, + 0x45, 0x00, + 0x46, 0x00, + 0x49, 0x04, + 0x4a, 0x00, + 0x4b, 0x7b, + 0x52, 0x30, + 0x55, 0xae, + 0x56, 0x47, + 0x57, 0xe1, + 0x58, 0x3a, + 0x5a, 0x1e, + 0x5b, 0x34, + 0x60, 0x00, + 0x63, 0x00, + 0x64, 0x00, + 0x65, 0x00, + 0x66, 0x00, + 0x67, 0x00, + 0x68, 0x00, + 0x69, 0x00, + 0x6a, 0x02, + 0x6b, 0x00, + 0x70, 0xff, + 0x71, 0x00, + 0x72, 0x00, + 0x73, 0x00, + 0x74, 0x0c, + 0x80, 0x00, + 0x81, 0x00, + 0x82, 0x00, + 0x83, 0x00, + 0x84, 0x04, + 0x85, 0x80, + 0x86, 0x24, + 0x87, 0x78, + 0x88, 0x10, + 0x89, 0x00, + 0x90, 0x01, + 0x91, 0x01, + 0xa0, 0x04, + 0xa1, 0x00, + 0xa2, 0x00, + 0xb0, 0x91, + 0xb1, 0x0b, + 0xc0, 0x53, + 0xc1, 0x70, + 0xc2, 0x12, + 0xd0, 0x00, + 0xd1, 0x00, + 0xd2, 0x00, + 0xd3, 0x00, + 0xd4, 0x00, + 0xd5, 0x00, + 0xde, 0x00, + 0xdf, 0x00, + 0x61, 0x38, + 0x62, 0x0a, + 0x53, 0x13, + 0x59, 0x08, + 0xff, 0xff, +}; + +static struct stv0297_config dvbc_philips_tdm1316l_config = { + .demod_address = 0x1c, + .inittab = dvbc_philips_tdm1316l_inittab, + .invert = 0, + .stop_during_read = 1, +}; + +static struct tda10023_config tda10023_config = { + .demod_address = 0xc, + .invert = 0, + .xtal = 16000000, + .pll_m = 11, + .pll_p = 3, + .pll_n = 1, + .deltaf = 0xa511, +}; + +static struct tda827x_config tda827x_config = { + .config = 0, +}; + +/* TT S2-3200 DVB-S (STB0899) Inittab */ +static const struct stb0899_s1_reg tt3200_stb0899_s1_init_1[] = { + + { STB0899_DEV_ID , 0x81 }, + { STB0899_DISCNTRL1 , 0x32 }, + { STB0899_DISCNTRL2 , 0x80 }, + { STB0899_DISRX_ST0 , 0x04 }, + { STB0899_DISRX_ST1 , 0x00 }, + { STB0899_DISPARITY , 0x00 }, + { STB0899_DISSTATUS , 0x20 }, + { STB0899_DISF22 , 0x8c }, + { STB0899_DISF22RX , 0x9a }, + { STB0899_SYSREG , 0x0b }, + { STB0899_ACRPRESC , 0x11 }, + { STB0899_ACRDIV1 , 0x0a }, + { STB0899_ACRDIV2 , 0x05 }, + { STB0899_DACR1 , 0x00 }, + { STB0899_DACR2 , 0x00 }, + { STB0899_OUTCFG , 0x00 }, + { STB0899_MODECFG , 0x00 }, + { STB0899_IRQSTATUS_3 , 0x30 }, + { STB0899_IRQSTATUS_2 , 0x00 }, + { STB0899_IRQSTATUS_1 , 0x00 }, + { STB0899_IRQSTATUS_0 , 0x00 }, + { STB0899_IRQMSK_3 , 0xf3 }, + { STB0899_IRQMSK_2 , 0xfc }, + { STB0899_IRQMSK_1 , 0xff }, + { STB0899_IRQMSK_0 , 0xff }, + { STB0899_IRQCFG , 0x00 }, + { STB0899_I2CCFG , 0x88 }, + { STB0899_I2CRPT , 0x48 }, /* 12k Pullup, Repeater=16, Stop=disabled */ + { STB0899_IOPVALUE5 , 0x00 }, + { STB0899_IOPVALUE4 , 0x20 }, + { STB0899_IOPVALUE3 , 0xc9 }, + { STB0899_IOPVALUE2 , 0x90 }, + { STB0899_IOPVALUE1 , 0x40 }, + { STB0899_IOPVALUE0 , 0x00 }, + { STB0899_GPIO00CFG , 0x82 }, + { STB0899_GPIO01CFG , 0x82 }, + { STB0899_GPIO02CFG , 0x82 }, + { STB0899_GPIO03CFG , 0x82 }, + { STB0899_GPIO04CFG , 0x82 }, + { STB0899_GPIO05CFG , 0x82 }, + { STB0899_GPIO06CFG , 0x82 }, + { STB0899_GPIO07CFG , 0x82 }, + { STB0899_GPIO08CFG , 0x82 }, + { STB0899_GPIO09CFG , 0x82 }, + { STB0899_GPIO10CFG , 0x82 }, + { STB0899_GPIO11CFG , 0x82 }, + { STB0899_GPIO12CFG , 0x82 }, + { STB0899_GPIO13CFG , 0x82 }, + { STB0899_GPIO14CFG , 0x82 }, + { STB0899_GPIO15CFG , 0x82 }, + { STB0899_GPIO16CFG , 0x82 }, + { STB0899_GPIO17CFG , 0x82 }, + { STB0899_GPIO18CFG , 0x82 }, + { STB0899_GPIO19CFG , 0x82 }, + { STB0899_GPIO20CFG , 0x82 }, + { STB0899_SDATCFG , 0xb8 }, + { STB0899_SCLTCFG , 0xba }, + { STB0899_AGCRFCFG , 0x1c }, /* 0x11 */ + { STB0899_GPIO22 , 0x82 }, /* AGCBB2CFG */ + { STB0899_GPIO21 , 0x91 }, /* AGCBB1CFG */ + { STB0899_DIRCLKCFG , 0x82 }, + { STB0899_CLKOUT27CFG , 0x7e }, + { STB0899_STDBYCFG , 0x82 }, + { STB0899_CS0CFG , 0x82 }, + { STB0899_CS1CFG , 0x82 }, + { STB0899_DISEQCOCFG , 0x20 }, + { STB0899_GPIO32CFG , 0x82 }, + { STB0899_GPIO33CFG , 0x82 }, + { STB0899_GPIO34CFG , 0x82 }, + { STB0899_GPIO35CFG , 0x82 }, + { STB0899_GPIO36CFG , 0x82 }, + { STB0899_GPIO37CFG , 0x82 }, + { STB0899_GPIO38CFG , 0x82 }, + { STB0899_GPIO39CFG , 0x82 }, + { STB0899_NCOARSE , 0x15 }, /* 0x15 = 27 Mhz Clock, F/3 = 198MHz, F/6 = 99MHz */ + { STB0899_SYNTCTRL , 0x02 }, /* 0x00 = CLK from CLKI, 0x02 = CLK from XTALI */ + { STB0899_FILTCTRL , 0x00 }, + { STB0899_SYSCTRL , 0x00 }, + { STB0899_STOPCLK1 , 0x20 }, + { STB0899_STOPCLK2 , 0x00 }, + { STB0899_INTBUFSTATUS , 0x00 }, + { STB0899_INTBUFCTRL , 0x0a }, + { 0xffff , 0xff }, +}; + +static const struct stb0899_s1_reg tt3200_stb0899_s1_init_3[] = { + { STB0899_DEMOD , 0x00 }, + { STB0899_RCOMPC , 0xc9 }, + { STB0899_AGC1CN , 0x41 }, + { STB0899_AGC1REF , 0x10 }, + { STB0899_RTC , 0x7a }, + { STB0899_TMGCFG , 0x4e }, + { STB0899_AGC2REF , 0x34 }, + { STB0899_TLSR , 0x84 }, + { STB0899_CFD , 0xc7 }, + { STB0899_ACLC , 0x87 }, + { STB0899_BCLC , 0x94 }, + { STB0899_EQON , 0x41 }, + { STB0899_LDT , 0xdd }, + { STB0899_LDT2 , 0xc9 }, + { STB0899_EQUALREF , 0xb4 }, + { STB0899_TMGRAMP , 0x10 }, + { STB0899_TMGTHD , 0x30 }, + { STB0899_IDCCOMP , 0xfb }, + { STB0899_QDCCOMP , 0x03 }, + { STB0899_POWERI , 0x3b }, + { STB0899_POWERQ , 0x3d }, + { STB0899_RCOMP , 0x81 }, + { STB0899_AGCIQIN , 0x80 }, + { STB0899_AGC2I1 , 0x04 }, + { STB0899_AGC2I2 , 0xf5 }, + { STB0899_TLIR , 0x25 }, + { STB0899_RTF , 0x80 }, + { STB0899_DSTATUS , 0x00 }, + { STB0899_LDI , 0xca }, + { STB0899_CFRM , 0xf1 }, + { STB0899_CFRL , 0xf3 }, + { STB0899_NIRM , 0x2a }, + { STB0899_NIRL , 0x05 }, + { STB0899_ISYMB , 0x17 }, + { STB0899_QSYMB , 0xfa }, + { STB0899_SFRH , 0x2f }, + { STB0899_SFRM , 0x68 }, + { STB0899_SFRL , 0x40 }, + { STB0899_SFRUPH , 0x2f }, + { STB0899_SFRUPM , 0x68 }, + { STB0899_SFRUPL , 0x40 }, + { STB0899_EQUAI1 , 0xfd }, + { STB0899_EQUAQ1 , 0x04 }, + { STB0899_EQUAI2 , 0x0f }, + { STB0899_EQUAQ2 , 0xff }, + { STB0899_EQUAI3 , 0xdf }, + { STB0899_EQUAQ3 , 0xfa }, + { STB0899_EQUAI4 , 0x37 }, + { STB0899_EQUAQ4 , 0x0d }, + { STB0899_EQUAI5 , 0xbd }, + { STB0899_EQUAQ5 , 0xf7 }, + { STB0899_DSTATUS2 , 0x00 }, + { STB0899_VSTATUS , 0x00 }, + { STB0899_VERROR , 0xff }, + { STB0899_IQSWAP , 0x2a }, + { STB0899_ECNT1M , 0x00 }, + { STB0899_ECNT1L , 0x00 }, + { STB0899_ECNT2M , 0x00 }, + { STB0899_ECNT2L , 0x00 }, + { STB0899_ECNT3M , 0x00 }, + { STB0899_ECNT3L , 0x00 }, + { STB0899_FECAUTO1 , 0x06 }, + { STB0899_FECM , 0x01 }, + { STB0899_VTH12 , 0xf0 }, + { STB0899_VTH23 , 0xa0 }, + { STB0899_VTH34 , 0x78 }, + { STB0899_VTH56 , 0x4e }, + { STB0899_VTH67 , 0x48 }, + { STB0899_VTH78 , 0x38 }, + { STB0899_PRVIT , 0xff }, + { STB0899_VITSYNC , 0x19 }, + { STB0899_RSULC , 0xb1 }, /* DVB = 0xb1, DSS = 0xa1 */ + { STB0899_TSULC , 0x42 }, + { STB0899_RSLLC , 0x40 }, + { STB0899_TSLPL , 0x12 }, + { STB0899_TSCFGH , 0x0c }, + { STB0899_TSCFGM , 0x00 }, + { STB0899_TSCFGL , 0x0c }, + { STB0899_TSOUT , 0x4d }, /* 0x0d for CAM */ + { STB0899_RSSYNCDEL , 0x00 }, + { STB0899_TSINHDELH , 0x02 }, + { STB0899_TSINHDELM , 0x00 }, + { STB0899_TSINHDELL , 0x00 }, + { STB0899_TSLLSTKM , 0x00 }, + { STB0899_TSLLSTKL , 0x00 }, + { STB0899_TSULSTKM , 0x00 }, + { STB0899_TSULSTKL , 0xab }, + { STB0899_PCKLENUL , 0x00 }, + { STB0899_PCKLENLL , 0xcc }, + { STB0899_RSPCKLEN , 0xcc }, + { STB0899_TSSTATUS , 0x80 }, + { STB0899_ERRCTRL1 , 0xb6 }, + { STB0899_ERRCTRL2 , 0x96 }, + { STB0899_ERRCTRL3 , 0x89 }, + { STB0899_DMONMSK1 , 0x27 }, + { STB0899_DMONMSK0 , 0x03 }, + { STB0899_DEMAPVIT , 0x5c }, + { STB0899_PLPARM , 0x1f }, + { STB0899_PDELCTRL , 0x48 }, + { STB0899_PDELCTRL2 , 0x00 }, + { STB0899_BBHCTRL1 , 0x00 }, + { STB0899_BBHCTRL2 , 0x00 }, + { STB0899_HYSTTHRESH , 0x77 }, + { STB0899_MATCSTM , 0x00 }, + { STB0899_MATCSTL , 0x00 }, + { STB0899_UPLCSTM , 0x00 }, + { STB0899_UPLCSTL , 0x00 }, + { STB0899_DFLCSTM , 0x00 }, + { STB0899_DFLCSTL , 0x00 }, + { STB0899_SYNCCST , 0x00 }, + { STB0899_SYNCDCSTM , 0x00 }, + { STB0899_SYNCDCSTL , 0x00 }, + { STB0899_ISI_ENTRY , 0x00 }, + { STB0899_ISI_BIT_EN , 0x00 }, + { STB0899_MATSTRM , 0x00 }, + { STB0899_MATSTRL , 0x00 }, + { STB0899_UPLSTRM , 0x00 }, + { STB0899_UPLSTRL , 0x00 }, + { STB0899_DFLSTRM , 0x00 }, + { STB0899_DFLSTRL , 0x00 }, + { STB0899_SYNCSTR , 0x00 }, + { STB0899_SYNCDSTRM , 0x00 }, + { STB0899_SYNCDSTRL , 0x00 }, + { STB0899_CFGPDELSTATUS1 , 0x10 }, + { STB0899_CFGPDELSTATUS2 , 0x00 }, + { STB0899_BBFERRORM , 0x00 }, + { STB0899_BBFERRORL , 0x00 }, + { STB0899_UPKTERRORM , 0x00 }, + { STB0899_UPKTERRORL , 0x00 }, + { 0xffff , 0xff }, +}; + +static struct stb0899_config tt3200_config = { + .init_dev = tt3200_stb0899_s1_init_1, + .init_s2_demod = stb0899_s2_init_2, + .init_s1_demod = tt3200_stb0899_s1_init_3, + .init_s2_fec = stb0899_s2_init_4, + .init_tst = stb0899_s1_init_5, + + .postproc = NULL, + + .demod_address = 0x68, + + .xtal_freq = 27000000, + .inversion = IQ_SWAP_ON, /* 1 */ + + .lo_clk = 76500000, + .hi_clk = 99000000, + + .esno_ave = STB0899_DVBS2_ESNO_AVE, + .esno_quant = STB0899_DVBS2_ESNO_QUANT, + .avframes_coarse = STB0899_DVBS2_AVFRAMES_COARSE, + .avframes_fine = STB0899_DVBS2_AVFRAMES_FINE, + .miss_threshold = STB0899_DVBS2_MISS_THRESHOLD, + .uwp_threshold_acq = STB0899_DVBS2_UWP_THRESHOLD_ACQ, + .uwp_threshold_track = STB0899_DVBS2_UWP_THRESHOLD_TRACK, + .uwp_threshold_sof = STB0899_DVBS2_UWP_THRESHOLD_SOF, + .sof_search_timeout = STB0899_DVBS2_SOF_SEARCH_TIMEOUT, + + .btr_nco_bits = STB0899_DVBS2_BTR_NCO_BITS, + .btr_gain_shift_offset = STB0899_DVBS2_BTR_GAIN_SHIFT_OFFSET, + .crl_nco_bits = STB0899_DVBS2_CRL_NCO_BITS, + .ldpc_max_iter = STB0899_DVBS2_LDPC_MAX_ITER, + + .tuner_get_frequency = stb6100_get_frequency, + .tuner_set_frequency = stb6100_set_frequency, + .tuner_set_bandwidth = stb6100_set_bandwidth, + .tuner_get_bandwidth = stb6100_get_bandwidth, + .tuner_set_rfsiggain = NULL +}; + +static struct stb6100_config tt3200_stb6100_config = { + .tuner_address = 0x60, + .refclock = 27000000, +}; + +static void frontend_init(struct budget_ci *budget_ci) +{ + switch (budget_ci->budget.dev->pci->subsystem_device) { + case 0x100c: // Hauppauge/TT Nova-CI budget (stv0299/ALPS BSRU6(tsa5059)) + budget_ci->budget.dvb_frontend = + dvb_attach(stv0299_attach, &alps_bsru6_config, &budget_ci->budget.i2c_adap); + if (budget_ci->budget.dvb_frontend) { + budget_ci->budget.dvb_frontend->ops.tuner_ops.set_params = alps_bsru6_tuner_set_params; + budget_ci->budget.dvb_frontend->tuner_priv = &budget_ci->budget.i2c_adap; + break; + } + break; + + case 0x100f: // Hauppauge/TT Nova-CI budget (stv0299b/Philips su1278(tsa5059)) + budget_ci->budget.dvb_frontend = + dvb_attach(stv0299_attach, &philips_su1278_tt_config, &budget_ci->budget.i2c_adap); + if (budget_ci->budget.dvb_frontend) { + budget_ci->budget.dvb_frontend->ops.tuner_ops.set_params = philips_su1278_tt_tuner_set_params; + break; + } + break; + + case 0x1010: // TT DVB-C CI budget (stv0297/Philips tdm1316l(tda6651tt)) + budget_ci->tuner_pll_address = 0x61; + budget_ci->budget.dvb_frontend = + dvb_attach(stv0297_attach, &dvbc_philips_tdm1316l_config, &budget_ci->budget.i2c_adap); + if (budget_ci->budget.dvb_frontend) { + budget_ci->budget.dvb_frontend->ops.tuner_ops.set_params = dvbc_philips_tdm1316l_tuner_set_params; + break; + } + break; + + case 0x1011: // Hauppauge/TT Nova-T budget (tda10045/Philips tdm1316l(tda6651tt) + TDA9889) + budget_ci->tuner_pll_address = 0x63; + budget_ci->budget.dvb_frontend = + dvb_attach(tda10045_attach, &philips_tdm1316l_config, &budget_ci->budget.i2c_adap); + if (budget_ci->budget.dvb_frontend) { + budget_ci->budget.dvb_frontend->ops.tuner_ops.init = philips_tdm1316l_tuner_init; + budget_ci->budget.dvb_frontend->ops.tuner_ops.set_params = philips_tdm1316l_tuner_set_params; + break; + } + break; + + case 0x1012: // TT DVB-T CI budget (tda10046/Philips tdm1316l(tda6651tt)) + budget_ci->tuner_pll_address = 0x60; + budget_ci->budget.dvb_frontend = + dvb_attach(tda10046_attach, &philips_tdm1316l_config_invert, &budget_ci->budget.i2c_adap); + if (budget_ci->budget.dvb_frontend) { + budget_ci->budget.dvb_frontend->ops.tuner_ops.init = philips_tdm1316l_tuner_init; + budget_ci->budget.dvb_frontend->ops.tuner_ops.set_params = philips_tdm1316l_tuner_set_params; + break; + } + break; + + case 0x1017: // TT S-1500 PCI + budget_ci->budget.dvb_frontend = dvb_attach(stv0299_attach, &alps_bsbe1_config, &budget_ci->budget.i2c_adap); + if (budget_ci->budget.dvb_frontend) { + budget_ci->budget.dvb_frontend->ops.tuner_ops.set_params = alps_bsbe1_tuner_set_params; + budget_ci->budget.dvb_frontend->tuner_priv = &budget_ci->budget.i2c_adap; + + budget_ci->budget.dvb_frontend->ops.dishnetwork_send_legacy_command = NULL; + if (dvb_attach(lnbp21_attach, budget_ci->budget.dvb_frontend, &budget_ci->budget.i2c_adap, LNBP21_LLC, 0) == NULL) { + printk("%s: No LNBP21 found!\n", __func__); + dvb_frontend_detach(budget_ci->budget.dvb_frontend); + budget_ci->budget.dvb_frontend = NULL; + } + } + break; + + case 0x101a: /* TT Budget-C-1501 (philips tda10023/philips tda8274A) */ + budget_ci->budget.dvb_frontend = dvb_attach(tda10023_attach, &tda10023_config, &budget_ci->budget.i2c_adap, 0x48); + if (budget_ci->budget.dvb_frontend) { + if (dvb_attach(tda827x_attach, budget_ci->budget.dvb_frontend, 0x61, &budget_ci->budget.i2c_adap, &tda827x_config) == NULL) { + printk(KERN_ERR "%s: No tda827x found!\n", __func__); + dvb_frontend_detach(budget_ci->budget.dvb_frontend); + budget_ci->budget.dvb_frontend = NULL; + } + } + break; + + case 0x101b: /* TT S-1500B (BSBE1-D01A - STV0288/STB6000/LNBP21) */ + budget_ci->budget.dvb_frontend = dvb_attach(stv0288_attach, &stv0288_bsbe1_d01a_config, &budget_ci->budget.i2c_adap); + if (budget_ci->budget.dvb_frontend) { + if (dvb_attach(stb6000_attach, budget_ci->budget.dvb_frontend, 0x63, &budget_ci->budget.i2c_adap)) { + if (!dvb_attach(lnbp21_attach, budget_ci->budget.dvb_frontend, &budget_ci->budget.i2c_adap, 0, 0)) { + printk(KERN_ERR "%s: No LNBP21 found!\n", __func__); + dvb_frontend_detach(budget_ci->budget.dvb_frontend); + budget_ci->budget.dvb_frontend = NULL; + } + } else { + printk(KERN_ERR "%s: No STB6000 found!\n", __func__); + dvb_frontend_detach(budget_ci->budget.dvb_frontend); + budget_ci->budget.dvb_frontend = NULL; + } + } + break; + + case 0x1019: // TT S2-3200 PCI + /* + * NOTE! on some STB0899 versions, the internal PLL takes a longer time + * to settle, aka LOCK. On the older revisions of the chip, we don't see + * this, as a result on the newer chips the entire clock tree, will not + * be stable after a freshly POWER 'ed up situation. + * In this case, we should RESET the STB0899 (Active LOW) and wait for + * PLL stabilization. + * + * On the TT S2 3200 and clones, the STB0899 demodulator's RESETB is + * connected to the SAA7146 GPIO, GPIO2, Pin 142 + */ + /* Reset Demodulator */ + saa7146_setgpio(budget_ci->budget.dev, 2, SAA7146_GPIO_OUTLO); + /* Wait for everything to die */ + msleep(50); + /* Pull it up out of Reset state */ + saa7146_setgpio(budget_ci->budget.dev, 2, SAA7146_GPIO_OUTHI); + /* Wait for PLL to stabilize */ + msleep(250); + /* + * PLL state should be stable now. Ideally, we should check + * for PLL LOCK status. But well, never mind! + */ + budget_ci->budget.dvb_frontend = dvb_attach(stb0899_attach, &tt3200_config, &budget_ci->budget.i2c_adap); + if (budget_ci->budget.dvb_frontend) { + if (dvb_attach(stb6100_attach, budget_ci->budget.dvb_frontend, &tt3200_stb6100_config, &budget_ci->budget.i2c_adap)) { + if (!dvb_attach(lnbp21_attach, budget_ci->budget.dvb_frontend, &budget_ci->budget.i2c_adap, 0, 0)) { + printk("%s: No LNBP21 found!\n", __func__); + dvb_frontend_detach(budget_ci->budget.dvb_frontend); + budget_ci->budget.dvb_frontend = NULL; + } + } else { + dvb_frontend_detach(budget_ci->budget.dvb_frontend); + budget_ci->budget.dvb_frontend = NULL; + } + } + break; + + } + + if (budget_ci->budget.dvb_frontend == NULL) { + printk("budget-ci: A frontend driver was not found for device [%04x:%04x] subsystem [%04x:%04x]\n", + budget_ci->budget.dev->pci->vendor, + budget_ci->budget.dev->pci->device, + budget_ci->budget.dev->pci->subsystem_vendor, + budget_ci->budget.dev->pci->subsystem_device); + } else { + if (dvb_register_frontend + (&budget_ci->budget.dvb_adapter, budget_ci->budget.dvb_frontend)) { + printk("budget-ci: Frontend registration failed!\n"); + dvb_frontend_detach(budget_ci->budget.dvb_frontend); + budget_ci->budget.dvb_frontend = NULL; + } + } +} + +static int budget_ci_attach(struct saa7146_dev *dev, struct saa7146_pci_extension_data *info) +{ + struct budget_ci *budget_ci; + int err; + + budget_ci = kzalloc(sizeof(struct budget_ci), GFP_KERNEL); + if (!budget_ci) { + err = -ENOMEM; + goto out1; + } + + dprintk(2, "budget_ci: %p\n", budget_ci); + + dev->ext_priv = budget_ci; + + err = ttpci_budget_init(&budget_ci->budget, dev, info, THIS_MODULE, + adapter_nr); + if (err) + goto out2; + + err = msp430_ir_init(budget_ci); + if (err) + goto out3; + + ciintf_init(budget_ci); + + budget_ci->budget.dvb_adapter.priv = budget_ci; + frontend_init(budget_ci); + + ttpci_budget_init_hooks(&budget_ci->budget); + + return 0; + +out3: + ttpci_budget_deinit(&budget_ci->budget); +out2: + kfree(budget_ci); +out1: + return err; +} + +static int budget_ci_detach(struct saa7146_dev *dev) +{ + struct budget_ci *budget_ci = (struct budget_ci *) dev->ext_priv; + struct saa7146_dev *saa = budget_ci->budget.dev; + int err; + + if (budget_ci->budget.ci_present) + ciintf_deinit(budget_ci); + msp430_ir_deinit(budget_ci); + if (budget_ci->budget.dvb_frontend) { + dvb_unregister_frontend(budget_ci->budget.dvb_frontend); + dvb_frontend_detach(budget_ci->budget.dvb_frontend); + } + err = ttpci_budget_deinit(&budget_ci->budget); + + // disable frontend and CI interface + saa7146_setgpio(saa, 2, SAA7146_GPIO_INPUT); + + kfree(budget_ci); + + return err; +} + +static struct saa7146_extension budget_extension; + +MAKE_BUDGET_INFO(ttbs2, "TT-Budget/S-1500 PCI", BUDGET_TT); +MAKE_BUDGET_INFO(ttbci, "TT-Budget/WinTV-NOVA-CI PCI", BUDGET_TT_HW_DISEQC); +MAKE_BUDGET_INFO(ttbt2, "TT-Budget/WinTV-NOVA-T PCI", BUDGET_TT); +MAKE_BUDGET_INFO(ttbtci, "TT-Budget-T-CI PCI", BUDGET_TT); +MAKE_BUDGET_INFO(ttbcci, "TT-Budget-C-CI PCI", BUDGET_TT); +MAKE_BUDGET_INFO(ttc1501, "TT-Budget C-1501 PCI", BUDGET_TT); +MAKE_BUDGET_INFO(tt3200, "TT-Budget S2-3200 PCI", BUDGET_TT); +MAKE_BUDGET_INFO(ttbs1500b, "TT-Budget S-1500B PCI", BUDGET_TT); + +static struct pci_device_id pci_tbl[] = { + MAKE_EXTENSION_PCI(ttbci, 0x13c2, 0x100c), + MAKE_EXTENSION_PCI(ttbci, 0x13c2, 0x100f), + MAKE_EXTENSION_PCI(ttbcci, 0x13c2, 0x1010), + MAKE_EXTENSION_PCI(ttbt2, 0x13c2, 0x1011), + MAKE_EXTENSION_PCI(ttbtci, 0x13c2, 0x1012), + MAKE_EXTENSION_PCI(ttbs2, 0x13c2, 0x1017), + MAKE_EXTENSION_PCI(ttc1501, 0x13c2, 0x101a), + MAKE_EXTENSION_PCI(tt3200, 0x13c2, 0x1019), + MAKE_EXTENSION_PCI(ttbs1500b, 0x13c2, 0x101b), + { + .vendor = 0, + } +}; + +MODULE_DEVICE_TABLE(pci, pci_tbl); + +static struct saa7146_extension budget_extension = { + .name = "budget_ci dvb", + .flags = SAA7146_USE_I2C_IRQ, + + .module = THIS_MODULE, + .pci_tbl = &pci_tbl[0], + .attach = budget_ci_attach, + .detach = budget_ci_detach, + + .irq_mask = MASK_03 | MASK_06 | MASK_10, + .irq_func = budget_ci_irq, +}; + +static int __init budget_ci_init(void) +{ + return saa7146_register_extension(&budget_extension); +} + +static void __exit budget_ci_exit(void) +{ + saa7146_unregister_extension(&budget_extension); +} + +module_init(budget_ci_init); +module_exit(budget_ci_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Michael Hunold, Jack Thomasson, Andrew de Quincey, others"); +MODULE_DESCRIPTION("driver for the SAA7146 based so-called " + "budget PCI DVB cards w/ CI-module produced by " + "Siemens, Technotrend, Hauppauge"); |