diff options
Diffstat (limited to 'drivers/media/dvb/ttpci/budget-av.c')
-rw-r--r-- | drivers/media/dvb/ttpci/budget-av.c | 1640 |
1 files changed, 1640 insertions, 0 deletions
diff --git a/drivers/media/dvb/ttpci/budget-av.c b/drivers/media/dvb/ttpci/budget-av.c new file mode 100644 index 00000000..8b32e282 --- /dev/null +++ b/drivers/media/dvb/ttpci/budget-av.c @@ -0,0 +1,1640 @@ +/* + * budget-av.c: driver for the SAA7146 based Budget DVB cards + * with analog video in + * + * Compiled from various sources by Michael Hunold <michael@mihu.de> + * + * CI interface support (c) 2004 Olivier Gournet <ogournet@anevia.com> & + * Andrew de Quincey <adq_dvb@lidskialf.net> + * + * Copyright (C) 2002 Ralph Metzler <rjkm@metzlerbros.de> + * + * Copyright (C) 1999-2002 Ralph Metzler + * & Marcus Metzler for convergence integrated media GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * Or, point your browser to http://www.gnu.org/copyleft/gpl.html + * + * + * the project's page is at http://www.linuxtv.org/ + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include "budget.h" +#include "stv0299.h" +#include "stb0899_drv.h" +#include "stb0899_reg.h" +#include "stb0899_cfg.h" +#include "tda8261.h" +#include "tda8261_cfg.h" +#include "tda1002x.h" +#include "tda1004x.h" +#include "tua6100.h" +#include "dvb-pll.h" +#include <media/saa7146_vv.h> +#include <linux/module.h> +#include <linux/errno.h> +#include <linux/slab.h> +#include <linux/interrupt.h> +#include <linux/input.h> +#include <linux/spinlock.h> + +#include "dvb_ca_en50221.h" + +#define DEBICICAM 0x02420000 + +#define SLOTSTATUS_NONE 1 +#define SLOTSTATUS_PRESENT 2 +#define SLOTSTATUS_RESET 4 +#define SLOTSTATUS_READY 8 +#define SLOTSTATUS_OCCUPIED (SLOTSTATUS_PRESENT|SLOTSTATUS_RESET|SLOTSTATUS_READY) + +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + +struct budget_av { + struct budget budget; + struct video_device *vd; + int cur_input; + int has_saa7113; + struct tasklet_struct ciintf_irq_tasklet; + int slot_status; + struct dvb_ca_en50221 ca; + u8 reinitialise_demod:1; +}; + +static int ciintf_slot_shutdown(struct dvb_ca_en50221 *ca, int slot); + + +/* GPIO Connections: + * 0 - Vcc/Reset (Reset is controlled by capacitor). Resets the frontend *AS WELL*! + * 1 - CI memory select 0=>IO memory, 1=>Attribute Memory + * 2 - CI Card Enable (Active Low) + * 3 - CI Card Detect + */ + +/**************************************************************************** + * INITIALIZATION + ****************************************************************************/ + +static u8 i2c_readreg(struct i2c_adapter *i2c, u8 id, u8 reg) +{ + u8 mm1[] = { 0x00 }; + u8 mm2[] = { 0x00 }; + struct i2c_msg msgs[2]; + + msgs[0].flags = 0; + msgs[1].flags = I2C_M_RD; + msgs[0].addr = msgs[1].addr = id / 2; + mm1[0] = reg; + msgs[0].len = 1; + msgs[1].len = 1; + msgs[0].buf = mm1; + msgs[1].buf = mm2; + + i2c_transfer(i2c, msgs, 2); + + return mm2[0]; +} + +static int i2c_readregs(struct i2c_adapter *i2c, u8 id, u8 reg, u8 * buf, u8 len) +{ + u8 mm1[] = { reg }; + struct i2c_msg msgs[2] = { + {.addr = id / 2,.flags = 0,.buf = mm1,.len = 1}, + {.addr = id / 2,.flags = I2C_M_RD,.buf = buf,.len = len} + }; + + if (i2c_transfer(i2c, msgs, 2) != 2) + return -EIO; + + return 0; +} + +static int i2c_writereg(struct i2c_adapter *i2c, u8 id, u8 reg, u8 val) +{ + u8 msg[2] = { reg, val }; + struct i2c_msg msgs; + + msgs.flags = 0; + msgs.addr = id / 2; + msgs.len = 2; + msgs.buf = msg; + return i2c_transfer(i2c, &msgs, 1); +} + +static int ciintf_read_attribute_mem(struct dvb_ca_en50221 *ca, int slot, int address) +{ + struct budget_av *budget_av = (struct budget_av *) ca->data; + int result; + + if (slot != 0) + return -EINVAL; + + saa7146_setgpio(budget_av->budget.dev, 1, SAA7146_GPIO_OUTHI); + udelay(1); + + result = ttpci_budget_debiread(&budget_av->budget, DEBICICAM, address & 0xfff, 1, 0, 1); + if (result == -ETIMEDOUT) { + ciintf_slot_shutdown(ca, slot); + pr_info("cam ejected 1\n"); + } + return result; +} + +static int ciintf_write_attribute_mem(struct dvb_ca_en50221 *ca, int slot, int address, u8 value) +{ + struct budget_av *budget_av = (struct budget_av *) ca->data; + int result; + + if (slot != 0) + return -EINVAL; + + saa7146_setgpio(budget_av->budget.dev, 1, SAA7146_GPIO_OUTHI); + udelay(1); + + result = ttpci_budget_debiwrite(&budget_av->budget, DEBICICAM, address & 0xfff, 1, value, 0, 1); + if (result == -ETIMEDOUT) { + ciintf_slot_shutdown(ca, slot); + pr_info("cam ejected 2\n"); + } + return result; +} + +static int ciintf_read_cam_control(struct dvb_ca_en50221 *ca, int slot, u8 address) +{ + struct budget_av *budget_av = (struct budget_av *) ca->data; + int result; + + if (slot != 0) + return -EINVAL; + + saa7146_setgpio(budget_av->budget.dev, 1, SAA7146_GPIO_OUTLO); + udelay(1); + + result = ttpci_budget_debiread(&budget_av->budget, DEBICICAM, address & 3, 1, 0, 0); + if (result == -ETIMEDOUT) { + ciintf_slot_shutdown(ca, slot); + pr_info("cam ejected 3\n"); + return -ETIMEDOUT; + } + return result; +} + +static int ciintf_write_cam_control(struct dvb_ca_en50221 *ca, int slot, u8 address, u8 value) +{ + struct budget_av *budget_av = (struct budget_av *) ca->data; + int result; + + if (slot != 0) + return -EINVAL; + + saa7146_setgpio(budget_av->budget.dev, 1, SAA7146_GPIO_OUTLO); + udelay(1); + + result = ttpci_budget_debiwrite(&budget_av->budget, DEBICICAM, address & 3, 1, value, 0, 0); + if (result == -ETIMEDOUT) { + ciintf_slot_shutdown(ca, slot); + pr_info("cam ejected 5\n"); + } + return result; +} + +static int ciintf_slot_reset(struct dvb_ca_en50221 *ca, int slot) +{ + struct budget_av *budget_av = (struct budget_av *) ca->data; + struct saa7146_dev *saa = budget_av->budget.dev; + + if (slot != 0) + return -EINVAL; + + dprintk(1, "ciintf_slot_reset\n"); + budget_av->slot_status = SLOTSTATUS_RESET; + + saa7146_setgpio(saa, 2, SAA7146_GPIO_OUTHI); /* disable card */ + + saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTHI); /* Vcc off */ + msleep(2); + saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTLO); /* Vcc on */ + msleep(20); /* 20 ms Vcc settling time */ + + saa7146_setgpio(saa, 2, SAA7146_GPIO_OUTLO); /* enable card */ + ttpci_budget_set_video_port(saa, BUDGET_VIDEO_PORTB); + msleep(20); + + /* reinitialise the frontend if necessary */ + if (budget_av->reinitialise_demod) + dvb_frontend_reinitialise(budget_av->budget.dvb_frontend); + + return 0; +} + +static int ciintf_slot_shutdown(struct dvb_ca_en50221 *ca, int slot) +{ + struct budget_av *budget_av = (struct budget_av *) ca->data; + struct saa7146_dev *saa = budget_av->budget.dev; + + if (slot != 0) + return -EINVAL; + + dprintk(1, "ciintf_slot_shutdown\n"); + + ttpci_budget_set_video_port(saa, BUDGET_VIDEO_PORTB); + budget_av->slot_status = SLOTSTATUS_NONE; + + return 0; +} + +static int ciintf_slot_ts_enable(struct dvb_ca_en50221 *ca, int slot) +{ + struct budget_av *budget_av = (struct budget_av *) ca->data; + struct saa7146_dev *saa = budget_av->budget.dev; + + if (slot != 0) + return -EINVAL; + + dprintk(1, "ciintf_slot_ts_enable: %d\n", budget_av->slot_status); + + ttpci_budget_set_video_port(saa, BUDGET_VIDEO_PORTA); + + return 0; +} + +static int ciintf_poll_slot_status(struct dvb_ca_en50221 *ca, int slot, int open) +{ + struct budget_av *budget_av = (struct budget_av *) ca->data; + struct saa7146_dev *saa = budget_av->budget.dev; + int result; + + if (slot != 0) + return -EINVAL; + + /* test the card detect line - needs to be done carefully + * since it never goes high for some CAMs on this interface (e.g. topuptv) */ + if (budget_av->slot_status == SLOTSTATUS_NONE) { + saa7146_setgpio(saa, 3, SAA7146_GPIO_INPUT); + udelay(1); + if (saa7146_read(saa, PSR) & MASK_06) { + if (budget_av->slot_status == SLOTSTATUS_NONE) { + budget_av->slot_status = SLOTSTATUS_PRESENT; + pr_info("cam inserted A\n"); + } + } + saa7146_setgpio(saa, 3, SAA7146_GPIO_OUTLO); + } + + /* We also try and read from IO memory to work round the above detection bug. If + * there is no CAM, we will get a timeout. Only done if there is no cam + * present, since this test actually breaks some cams :( + * + * if the CI interface is not open, we also do the above test since we + * don't care if the cam has problems - we'll be resetting it on open() anyway */ + if ((budget_av->slot_status == SLOTSTATUS_NONE) || (!open)) { + saa7146_setgpio(budget_av->budget.dev, 1, SAA7146_GPIO_OUTLO); + result = ttpci_budget_debiread(&budget_av->budget, DEBICICAM, 0, 1, 0, 1); + if ((result >= 0) && (budget_av->slot_status == SLOTSTATUS_NONE)) { + budget_av->slot_status = SLOTSTATUS_PRESENT; + pr_info("cam inserted B\n"); + } else if (result < 0) { + if (budget_av->slot_status != SLOTSTATUS_NONE) { + ciintf_slot_shutdown(ca, slot); + pr_info("cam ejected 5\n"); + return 0; + } + } + } + + /* read from attribute memory in reset/ready state to know when the CAM is ready */ + if (budget_av->slot_status == SLOTSTATUS_RESET) { + result = ciintf_read_attribute_mem(ca, slot, 0); + if (result == 0x1d) { + budget_av->slot_status = SLOTSTATUS_READY; + } + } + + /* work out correct return code */ + if (budget_av->slot_status != SLOTSTATUS_NONE) { + if (budget_av->slot_status & SLOTSTATUS_READY) { + return DVB_CA_EN50221_POLL_CAM_PRESENT | DVB_CA_EN50221_POLL_CAM_READY; + } + return DVB_CA_EN50221_POLL_CAM_PRESENT; + } + return 0; +} + +static int ciintf_init(struct budget_av *budget_av) +{ + struct saa7146_dev *saa = budget_av->budget.dev; + int result; + + memset(&budget_av->ca, 0, sizeof(struct dvb_ca_en50221)); + + saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTLO); + saa7146_setgpio(saa, 1, SAA7146_GPIO_OUTLO); + saa7146_setgpio(saa, 2, SAA7146_GPIO_OUTLO); + saa7146_setgpio(saa, 3, SAA7146_GPIO_OUTLO); + + /* Enable DEBI pins */ + saa7146_write(saa, MC1, MASK_27 | MASK_11); + + /* register CI interface */ + budget_av->ca.owner = THIS_MODULE; + budget_av->ca.read_attribute_mem = ciintf_read_attribute_mem; + budget_av->ca.write_attribute_mem = ciintf_write_attribute_mem; + budget_av->ca.read_cam_control = ciintf_read_cam_control; + budget_av->ca.write_cam_control = ciintf_write_cam_control; + budget_av->ca.slot_reset = ciintf_slot_reset; + budget_av->ca.slot_shutdown = ciintf_slot_shutdown; + budget_av->ca.slot_ts_enable = ciintf_slot_ts_enable; + budget_av->ca.poll_slot_status = ciintf_poll_slot_status; + budget_av->ca.data = budget_av; + budget_av->budget.ci_present = 1; + budget_av->slot_status = SLOTSTATUS_NONE; + + if ((result = dvb_ca_en50221_init(&budget_av->budget.dvb_adapter, + &budget_av->ca, 0, 1)) != 0) { + pr_err("ci initialisation failed\n"); + goto error; + } + + pr_info("ci interface initialised\n"); + return 0; + +error: + saa7146_write(saa, MC1, MASK_27); + return result; +} + +static void ciintf_deinit(struct budget_av *budget_av) +{ + struct saa7146_dev *saa = budget_av->budget.dev; + + saa7146_setgpio(saa, 0, SAA7146_GPIO_INPUT); + saa7146_setgpio(saa, 1, SAA7146_GPIO_INPUT); + saa7146_setgpio(saa, 2, SAA7146_GPIO_INPUT); + saa7146_setgpio(saa, 3, SAA7146_GPIO_INPUT); + + /* release the CA device */ + dvb_ca_en50221_release(&budget_av->ca); + + /* disable DEBI pins */ + saa7146_write(saa, MC1, MASK_27); +} + + +static const u8 saa7113_tab[] = { + 0x01, 0x08, + 0x02, 0xc0, + 0x03, 0x33, + 0x04, 0x00, + 0x05, 0x00, + 0x06, 0xeb, + 0x07, 0xe0, + 0x08, 0x28, + 0x09, 0x00, + 0x0a, 0x80, + 0x0b, 0x47, + 0x0c, 0x40, + 0x0d, 0x00, + 0x0e, 0x01, + 0x0f, 0x44, + + 0x10, 0x08, + 0x11, 0x0c, + 0x12, 0x7b, + 0x13, 0x00, + 0x15, 0x00, 0x16, 0x00, 0x17, 0x00, + + 0x57, 0xff, + 0x40, 0x82, 0x58, 0x00, 0x59, 0x54, 0x5a, 0x07, + 0x5b, 0x83, 0x5e, 0x00, + 0xff +}; + +static int saa7113_init(struct budget_av *budget_av) +{ + struct budget *budget = &budget_av->budget; + struct saa7146_dev *saa = budget->dev; + const u8 *data = saa7113_tab; + + saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTHI); + msleep(200); + + if (i2c_writereg(&budget->i2c_adap, 0x4a, 0x01, 0x08) != 1) { + dprintk(1, "saa7113 not found on KNC card\n"); + return -ENODEV; + } + + dprintk(1, "saa7113 detected and initializing\n"); + + while (*data != 0xff) { + i2c_writereg(&budget->i2c_adap, 0x4a, *data, *(data + 1)); + data += 2; + } + + dprintk(1, "saa7113 status=%02x\n", i2c_readreg(&budget->i2c_adap, 0x4a, 0x1f)); + + return 0; +} + +static int saa7113_setinput(struct budget_av *budget_av, int input) +{ + struct budget *budget = &budget_av->budget; + + if (1 != budget_av->has_saa7113) + return -ENODEV; + + if (input == 1) { + i2c_writereg(&budget->i2c_adap, 0x4a, 0x02, 0xc7); + i2c_writereg(&budget->i2c_adap, 0x4a, 0x09, 0x80); + } else if (input == 0) { + i2c_writereg(&budget->i2c_adap, 0x4a, 0x02, 0xc0); + i2c_writereg(&budget->i2c_adap, 0x4a, 0x09, 0x00); + } else + return -EINVAL; + + budget_av->cur_input = input; + return 0; +} + + +static int philips_su1278_ty_ci_set_symbol_rate(struct dvb_frontend *fe, u32 srate, u32 ratio) +{ + u8 aclk = 0; + u8 bclk = 0; + u8 m1; + + aclk = 0xb5; + if (srate < 2000000) + bclk = 0x86; + else if (srate < 5000000) + bclk = 0x89; + else if (srate < 15000000) + bclk = 0x8f; + else if (srate < 45000000) + bclk = 0x95; + + m1 = 0x14; + if (srate < 4000000) + m1 = 0x10; + + stv0299_writereg(fe, 0x13, aclk); + stv0299_writereg(fe, 0x14, bclk); + stv0299_writereg(fe, 0x1f, (ratio >> 16) & 0xff); + stv0299_writereg(fe, 0x20, (ratio >> 8) & 0xff); + stv0299_writereg(fe, 0x21, (ratio) & 0xf0); + stv0299_writereg(fe, 0x0f, 0x80 | m1); + + return 0; +} + +static int philips_su1278_ty_ci_tuner_set_params(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + u32 div; + u8 buf[4]; + struct budget *budget = (struct budget *) fe->dvb->priv; + struct i2c_msg msg = {.addr = 0x61,.flags = 0,.buf = buf,.len = sizeof(buf) }; + + if ((c->frequency < 950000) || (c->frequency > 2150000)) + return -EINVAL; + + div = (c->frequency + (125 - 1)) / 125; /* round correctly */ + buf[0] = (div >> 8) & 0x7f; + buf[1] = div & 0xff; + buf[2] = 0x80 | ((div & 0x18000) >> 10) | 4; + buf[3] = 0x20; + + if (c->symbol_rate < 4000000) + buf[3] |= 1; + + if (c->frequency < 1250000) + buf[3] |= 0; + else if (c->frequency < 1550000) + buf[3] |= 0x40; + else if (c->frequency < 2050000) + buf[3] |= 0x80; + else if (c->frequency < 2150000) + buf[3] |= 0xC0; + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + if (i2c_transfer(&budget->i2c_adap, &msg, 1) != 1) + return -EIO; + return 0; +} + +static u8 typhoon_cinergy1200s_inittab[] = { + 0x01, 0x15, + 0x02, 0x30, + 0x03, 0x00, + 0x04, 0x7d, /* F22FR = 0x7d, F22 = f_VCO / 128 / 0x7d = 22 kHz */ + 0x05, 0x35, /* I2CT = 0, SCLT = 1, SDAT = 1 */ + 0x06, 0x40, /* DAC not used, set to high impendance mode */ + 0x07, 0x00, /* DAC LSB */ + 0x08, 0x40, /* DiSEqC off */ + 0x09, 0x00, /* FIFO */ + 0x0c, 0x51, /* OP1 ctl = Normal, OP1 val = 1 (LNB Power ON) */ + 0x0d, 0x82, /* DC offset compensation = ON, beta_agc1 = 2 */ + 0x0e, 0x23, /* alpha_tmg = 2, beta_tmg = 3 */ + 0x10, 0x3f, // AGC2 0x3d + 0x11, 0x84, + 0x12, 0xb9, + 0x15, 0xc9, // lock detector threshold + 0x16, 0x00, + 0x17, 0x00, + 0x18, 0x00, + 0x19, 0x00, + 0x1a, 0x00, + 0x1f, 0x50, + 0x20, 0x00, + 0x21, 0x00, + 0x22, 0x00, + 0x23, 0x00, + 0x28, 0x00, // out imp: normal out type: parallel FEC mode:0 + 0x29, 0x1e, // 1/2 threshold + 0x2a, 0x14, // 2/3 threshold + 0x2b, 0x0f, // 3/4 threshold + 0x2c, 0x09, // 5/6 threshold + 0x2d, 0x05, // 7/8 threshold + 0x2e, 0x01, + 0x31, 0x1f, // test all FECs + 0x32, 0x19, // viterbi and synchro search + 0x33, 0xfc, // rs control + 0x34, 0x93, // error control + 0x0f, 0x92, + 0xff, 0xff +}; + +static struct stv0299_config typhoon_config = { + .demod_address = 0x68, + .inittab = typhoon_cinergy1200s_inittab, + .mclk = 88000000UL, + .invert = 0, + .skip_reinit = 0, + .lock_output = STV0299_LOCKOUTPUT_1, + .volt13_op0_op1 = STV0299_VOLT13_OP0, + .min_delay_ms = 100, + .set_symbol_rate = philips_su1278_ty_ci_set_symbol_rate, +}; + + +static struct stv0299_config cinergy_1200s_config = { + .demod_address = 0x68, + .inittab = typhoon_cinergy1200s_inittab, + .mclk = 88000000UL, + .invert = 0, + .skip_reinit = 0, + .lock_output = STV0299_LOCKOUTPUT_0, + .volt13_op0_op1 = STV0299_VOLT13_OP0, + .min_delay_ms = 100, + .set_symbol_rate = philips_su1278_ty_ci_set_symbol_rate, +}; + +static struct stv0299_config cinergy_1200s_1894_0010_config = { + .demod_address = 0x68, + .inittab = typhoon_cinergy1200s_inittab, + .mclk = 88000000UL, + .invert = 1, + .skip_reinit = 0, + .lock_output = STV0299_LOCKOUTPUT_1, + .volt13_op0_op1 = STV0299_VOLT13_OP0, + .min_delay_ms = 100, + .set_symbol_rate = philips_su1278_ty_ci_set_symbol_rate, +}; + +static int philips_cu1216_tuner_set_params(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + struct budget *budget = (struct budget *) fe->dvb->priv; + u8 buf[6]; + struct i2c_msg msg = {.addr = 0x60,.flags = 0,.buf = buf,.len = sizeof(buf) }; + int i; + +#define CU1216_IF 36125000 +#define TUNER_MUL 62500 + + u32 div = (c->frequency + CU1216_IF + TUNER_MUL / 2) / TUNER_MUL; + + buf[0] = (div >> 8) & 0x7f; + buf[1] = div & 0xff; + buf[2] = 0xce; + buf[3] = (c->frequency < 150000000 ? 0x01 : + c->frequency < 445000000 ? 0x02 : 0x04); + buf[4] = 0xde; + buf[5] = 0x20; + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + if (i2c_transfer(&budget->i2c_adap, &msg, 1) != 1) + return -EIO; + + /* wait for the pll lock */ + msg.flags = I2C_M_RD; + msg.len = 1; + for (i = 0; i < 20; i++) { + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + if (i2c_transfer(&budget->i2c_adap, &msg, 1) == 1 && (buf[0] & 0x40)) + break; + msleep(10); + } + + /* switch the charge pump to the lower current */ + msg.flags = 0; + msg.len = 2; + msg.buf = &buf[2]; + buf[2] &= ~0x40; + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + if (i2c_transfer(&budget->i2c_adap, &msg, 1) != 1) + return -EIO; + + return 0; +} + +static struct tda1002x_config philips_cu1216_config = { + .demod_address = 0x0c, + .invert = 1, +}; + +static struct tda1002x_config philips_cu1216_config_altaddress = { + .demod_address = 0x0d, + .invert = 0, +}; + +static struct tda10023_config philips_cu1216_tda10023_config = { + .demod_address = 0x0c, + .invert = 1, +}; + +static int philips_tu1216_tuner_init(struct dvb_frontend *fe) +{ + struct budget *budget = (struct budget *) fe->dvb->priv; + static u8 tu1216_init[] = { 0x0b, 0xf5, 0x85, 0xab }; + struct i2c_msg tuner_msg = {.addr = 0x60,.flags = 0,.buf = tu1216_init,.len = sizeof(tu1216_init) }; + + // setup PLL configuration + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + if (i2c_transfer(&budget->i2c_adap, &tuner_msg, 1) != 1) + return -EIO; + msleep(1); + + return 0; +} + +static int philips_tu1216_tuner_set_params(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + struct budget *budget = (struct budget *) fe->dvb->priv; + u8 tuner_buf[4]; + struct i2c_msg tuner_msg = {.addr = 0x60,.flags = 0,.buf = tuner_buf,.len = + sizeof(tuner_buf) }; + int tuner_frequency = 0; + u8 band, cp, filter; + + // determine charge pump + tuner_frequency = c->frequency + 36166000; + if (tuner_frequency < 87000000) + return -EINVAL; + else if (tuner_frequency < 130000000) + cp = 3; + else if (tuner_frequency < 160000000) + cp = 5; + else if (tuner_frequency < 200000000) + cp = 6; + else if (tuner_frequency < 290000000) + cp = 3; + else if (tuner_frequency < 420000000) + cp = 5; + else if (tuner_frequency < 480000000) + cp = 6; + else if (tuner_frequency < 620000000) + cp = 3; + else if (tuner_frequency < 830000000) + cp = 5; + else if (tuner_frequency < 895000000) + cp = 7; + else + return -EINVAL; + + // determine band + if (c->frequency < 49000000) + return -EINVAL; + else if (c->frequency < 161000000) + band = 1; + else if (c->frequency < 444000000) + band = 2; + else if (c->frequency < 861000000) + band = 4; + else + return -EINVAL; + + // setup PLL filter + switch (c->bandwidth_hz) { + case 6000000: + filter = 0; + break; + + case 7000000: + filter = 0; + break; + + case 8000000: + filter = 1; + break; + + default: + return -EINVAL; + } + + // calculate divisor + // ((36166000+((1000000/6)/2)) + Finput)/(1000000/6) + tuner_frequency = (((c->frequency / 1000) * 6) + 217496) / 1000; + + // setup tuner buffer + tuner_buf[0] = (tuner_frequency >> 8) & 0x7f; + tuner_buf[1] = tuner_frequency & 0xff; + tuner_buf[2] = 0xca; + tuner_buf[3] = (cp << 5) | (filter << 3) | band; + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + if (i2c_transfer(&budget->i2c_adap, &tuner_msg, 1) != 1) + return -EIO; + + msleep(1); + return 0; +} + +static int philips_tu1216_request_firmware(struct dvb_frontend *fe, + const struct firmware **fw, char *name) +{ + struct budget *budget = (struct budget *) fe->dvb->priv; + + return request_firmware(fw, name, &budget->dev->pci->dev); +} + +static struct tda1004x_config philips_tu1216_config = { + + .demod_address = 0x8, + .invert = 1, + .invert_oclk = 1, + .xtal_freq = TDA10046_XTAL_4M, + .agc_config = TDA10046_AGC_DEFAULT, + .if_freq = TDA10046_FREQ_3617, + .request_firmware = philips_tu1216_request_firmware, +}; + +static u8 philips_sd1878_inittab[] = { + 0x01, 0x15, + 0x02, 0x30, + 0x03, 0x00, + 0x04, 0x7d, + 0x05, 0x35, + 0x06, 0x40, + 0x07, 0x00, + 0x08, 0x43, + 0x09, 0x02, + 0x0C, 0x51, + 0x0D, 0x82, + 0x0E, 0x23, + 0x10, 0x3f, + 0x11, 0x84, + 0x12, 0xb9, + 0x15, 0xc9, + 0x16, 0x19, + 0x17, 0x8c, + 0x18, 0x59, + 0x19, 0xf8, + 0x1a, 0xfe, + 0x1c, 0x7f, + 0x1d, 0x00, + 0x1e, 0x00, + 0x1f, 0x50, + 0x20, 0x00, + 0x21, 0x00, + 0x22, 0x00, + 0x23, 0x00, + 0x28, 0x00, + 0x29, 0x28, + 0x2a, 0x14, + 0x2b, 0x0f, + 0x2c, 0x09, + 0x2d, 0x09, + 0x31, 0x1f, + 0x32, 0x19, + 0x33, 0xfc, + 0x34, 0x93, + 0xff, 0xff +}; + +static int philips_sd1878_ci_set_symbol_rate(struct dvb_frontend *fe, + u32 srate, u32 ratio) +{ + u8 aclk = 0; + u8 bclk = 0; + u8 m1; + + aclk = 0xb5; + if (srate < 2000000) + bclk = 0x86; + else if (srate < 5000000) + bclk = 0x89; + else if (srate < 15000000) + bclk = 0x8f; + else if (srate < 45000000) + bclk = 0x95; + + m1 = 0x14; + if (srate < 4000000) + m1 = 0x10; + + stv0299_writereg(fe, 0x0e, 0x23); + stv0299_writereg(fe, 0x0f, 0x94); + stv0299_writereg(fe, 0x10, 0x39); + stv0299_writereg(fe, 0x13, aclk); + stv0299_writereg(fe, 0x14, bclk); + stv0299_writereg(fe, 0x15, 0xc9); + stv0299_writereg(fe, 0x1f, (ratio >> 16) & 0xff); + stv0299_writereg(fe, 0x20, (ratio >> 8) & 0xff); + stv0299_writereg(fe, 0x21, (ratio) & 0xf0); + stv0299_writereg(fe, 0x0f, 0x80 | m1); + + return 0; +} + +static struct stv0299_config philips_sd1878_config = { + .demod_address = 0x68, + .inittab = philips_sd1878_inittab, + .mclk = 88000000UL, + .invert = 0, + .skip_reinit = 0, + .lock_output = STV0299_LOCKOUTPUT_1, + .volt13_op0_op1 = STV0299_VOLT13_OP0, + .min_delay_ms = 100, + .set_symbol_rate = philips_sd1878_ci_set_symbol_rate, +}; + +/* KNC1 DVB-S (STB0899) Inittab */ +static const struct stb0899_s1_reg knc1_stb0899_s1_init_1[] = { + + { STB0899_DEV_ID , 0x81 }, + { STB0899_DISCNTRL1 , 0x32 }, + { STB0899_DISCNTRL2 , 0x80 }, + { STB0899_DISRX_ST0 , 0x04 }, + { STB0899_DISRX_ST1 , 0x00 }, + { STB0899_DISPARITY , 0x00 }, + { STB0899_DISSTATUS , 0x20 }, + { STB0899_DISF22 , 0x8c }, + { STB0899_DISF22RX , 0x9a }, + { STB0899_SYSREG , 0x0b }, + { STB0899_ACRPRESC , 0x11 }, + { STB0899_ACRDIV1 , 0x0a }, + { STB0899_ACRDIV2 , 0x05 }, + { STB0899_DACR1 , 0x00 }, + { STB0899_DACR2 , 0x00 }, + { STB0899_OUTCFG , 0x00 }, + { STB0899_MODECFG , 0x00 }, + { STB0899_IRQSTATUS_3 , 0x30 }, + { STB0899_IRQSTATUS_2 , 0x00 }, + { STB0899_IRQSTATUS_1 , 0x00 }, + { STB0899_IRQSTATUS_0 , 0x00 }, + { STB0899_IRQMSK_3 , 0xf3 }, + { STB0899_IRQMSK_2 , 0xfc }, + { STB0899_IRQMSK_1 , 0xff }, + { STB0899_IRQMSK_0 , 0xff }, + { STB0899_IRQCFG , 0x00 }, + { STB0899_I2CCFG , 0x88 }, + { STB0899_I2CRPT , 0x58 }, /* Repeater=8, Stop=disabled */ + { STB0899_IOPVALUE5 , 0x00 }, + { STB0899_IOPVALUE4 , 0x20 }, + { STB0899_IOPVALUE3 , 0xc9 }, + { STB0899_IOPVALUE2 , 0x90 }, + { STB0899_IOPVALUE1 , 0x40 }, + { STB0899_IOPVALUE0 , 0x00 }, + { STB0899_GPIO00CFG , 0x82 }, + { STB0899_GPIO01CFG , 0x82 }, + { STB0899_GPIO02CFG , 0x82 }, + { STB0899_GPIO03CFG , 0x82 }, + { STB0899_GPIO04CFG , 0x82 }, + { STB0899_GPIO05CFG , 0x82 }, + { STB0899_GPIO06CFG , 0x82 }, + { STB0899_GPIO07CFG , 0x82 }, + { STB0899_GPIO08CFG , 0x82 }, + { STB0899_GPIO09CFG , 0x82 }, + { STB0899_GPIO10CFG , 0x82 }, + { STB0899_GPIO11CFG , 0x82 }, + { STB0899_GPIO12CFG , 0x82 }, + { STB0899_GPIO13CFG , 0x82 }, + { STB0899_GPIO14CFG , 0x82 }, + { STB0899_GPIO15CFG , 0x82 }, + { STB0899_GPIO16CFG , 0x82 }, + { STB0899_GPIO17CFG , 0x82 }, + { STB0899_GPIO18CFG , 0x82 }, + { STB0899_GPIO19CFG , 0x82 }, + { STB0899_GPIO20CFG , 0x82 }, + { STB0899_SDATCFG , 0xb8 }, + { STB0899_SCLTCFG , 0xba }, + { STB0899_AGCRFCFG , 0x08 }, /* 0x1c */ + { STB0899_GPIO22 , 0x82 }, /* AGCBB2CFG */ + { STB0899_GPIO21 , 0x91 }, /* AGCBB1CFG */ + { STB0899_DIRCLKCFG , 0x82 }, + { STB0899_CLKOUT27CFG , 0x7e }, + { STB0899_STDBYCFG , 0x82 }, + { STB0899_CS0CFG , 0x82 }, + { STB0899_CS1CFG , 0x82 }, + { STB0899_DISEQCOCFG , 0x20 }, + { STB0899_GPIO32CFG , 0x82 }, + { STB0899_GPIO33CFG , 0x82 }, + { STB0899_GPIO34CFG , 0x82 }, + { STB0899_GPIO35CFG , 0x82 }, + { STB0899_GPIO36CFG , 0x82 }, + { STB0899_GPIO37CFG , 0x82 }, + { STB0899_GPIO38CFG , 0x82 }, + { STB0899_GPIO39CFG , 0x82 }, + { STB0899_NCOARSE , 0x15 }, /* 0x15 = 27 Mhz Clock, F/3 = 198MHz, F/6 = 99MHz */ + { STB0899_SYNTCTRL , 0x02 }, /* 0x00 = CLK from CLKI, 0x02 = CLK from XTALI */ + { STB0899_FILTCTRL , 0x00 }, + { STB0899_SYSCTRL , 0x00 }, + { STB0899_STOPCLK1 , 0x20 }, + { STB0899_STOPCLK2 , 0x00 }, + { STB0899_INTBUFSTATUS , 0x00 }, + { STB0899_INTBUFCTRL , 0x0a }, + { 0xffff , 0xff }, +}; + +static const struct stb0899_s1_reg knc1_stb0899_s1_init_3[] = { + { STB0899_DEMOD , 0x00 }, + { STB0899_RCOMPC , 0xc9 }, + { STB0899_AGC1CN , 0x41 }, + { STB0899_AGC1REF , 0x08 }, + { STB0899_RTC , 0x7a }, + { STB0899_TMGCFG , 0x4e }, + { STB0899_AGC2REF , 0x33 }, + { STB0899_TLSR , 0x84 }, + { STB0899_CFD , 0xee }, + { STB0899_ACLC , 0x87 }, + { STB0899_BCLC , 0x94 }, + { STB0899_EQON , 0x41 }, + { STB0899_LDT , 0xdd }, + { STB0899_LDT2 , 0xc9 }, + { STB0899_EQUALREF , 0xb4 }, + { STB0899_TMGRAMP , 0x10 }, + { STB0899_TMGTHD , 0x30 }, + { STB0899_IDCCOMP , 0xfb }, + { STB0899_QDCCOMP , 0x03 }, + { STB0899_POWERI , 0x3b }, + { STB0899_POWERQ , 0x3d }, + { STB0899_RCOMP , 0x81 }, + { STB0899_AGCIQIN , 0x80 }, + { STB0899_AGC2I1 , 0x04 }, + { STB0899_AGC2I2 , 0xf5 }, + { STB0899_TLIR , 0x25 }, + { STB0899_RTF , 0x80 }, + { STB0899_DSTATUS , 0x00 }, + { STB0899_LDI , 0xca }, + { STB0899_CFRM , 0xf1 }, + { STB0899_CFRL , 0xf3 }, + { STB0899_NIRM , 0x2a }, + { STB0899_NIRL , 0x05 }, + { STB0899_ISYMB , 0x17 }, + { STB0899_QSYMB , 0xfa }, + { STB0899_SFRH , 0x2f }, + { STB0899_SFRM , 0x68 }, + { STB0899_SFRL , 0x40 }, + { STB0899_SFRUPH , 0x2f }, + { STB0899_SFRUPM , 0x68 }, + { STB0899_SFRUPL , 0x40 }, + { STB0899_EQUAI1 , 0xfd }, + { STB0899_EQUAQ1 , 0x04 }, + { STB0899_EQUAI2 , 0x0f }, + { STB0899_EQUAQ2 , 0xff }, + { STB0899_EQUAI3 , 0xdf }, + { STB0899_EQUAQ3 , 0xfa }, + { STB0899_EQUAI4 , 0x37 }, + { STB0899_EQUAQ4 , 0x0d }, + { STB0899_EQUAI5 , 0xbd }, + { STB0899_EQUAQ5 , 0xf7 }, + { STB0899_DSTATUS2 , 0x00 }, + { STB0899_VSTATUS , 0x00 }, + { STB0899_VERROR , 0xff }, + { STB0899_IQSWAP , 0x2a }, + { STB0899_ECNT1M , 0x00 }, + { STB0899_ECNT1L , 0x00 }, + { STB0899_ECNT2M , 0x00 }, + { STB0899_ECNT2L , 0x00 }, + { STB0899_ECNT3M , 0x00 }, + { STB0899_ECNT3L , 0x00 }, + { STB0899_FECAUTO1 , 0x06 }, + { STB0899_FECM , 0x01 }, + { STB0899_VTH12 , 0xf0 }, + { STB0899_VTH23 , 0xa0 }, + { STB0899_VTH34 , 0x78 }, + { STB0899_VTH56 , 0x4e }, + { STB0899_VTH67 , 0x48 }, + { STB0899_VTH78 , 0x38 }, + { STB0899_PRVIT , 0xff }, + { STB0899_VITSYNC , 0x19 }, + { STB0899_RSULC , 0xb1 }, /* DVB = 0xb1, DSS = 0xa1 */ + { STB0899_TSULC , 0x42 }, + { STB0899_RSLLC , 0x40 }, + { STB0899_TSLPL , 0x12 }, + { STB0899_TSCFGH , 0x0c }, + { STB0899_TSCFGM , 0x00 }, + { STB0899_TSCFGL , 0x0c }, + { STB0899_TSOUT , 0x4d }, /* 0x0d for CAM */ + { STB0899_RSSYNCDEL , 0x00 }, + { STB0899_TSINHDELH , 0x02 }, + { STB0899_TSINHDELM , 0x00 }, + { STB0899_TSINHDELL , 0x00 }, + { STB0899_TSLLSTKM , 0x00 }, + { STB0899_TSLLSTKL , 0x00 }, + { STB0899_TSULSTKM , 0x00 }, + { STB0899_TSULSTKL , 0xab }, + { STB0899_PCKLENUL , 0x00 }, + { STB0899_PCKLENLL , 0xcc }, + { STB0899_RSPCKLEN , 0xcc }, + { STB0899_TSSTATUS , 0x80 }, + { STB0899_ERRCTRL1 , 0xb6 }, + { STB0899_ERRCTRL2 , 0x96 }, + { STB0899_ERRCTRL3 , 0x89 }, + { STB0899_DMONMSK1 , 0x27 }, + { STB0899_DMONMSK0 , 0x03 }, + { STB0899_DEMAPVIT , 0x5c }, + { STB0899_PLPARM , 0x1f }, + { STB0899_PDELCTRL , 0x48 }, + { STB0899_PDELCTRL2 , 0x00 }, + { STB0899_BBHCTRL1 , 0x00 }, + { STB0899_BBHCTRL2 , 0x00 }, + { STB0899_HYSTTHRESH , 0x77 }, + { STB0899_MATCSTM , 0x00 }, + { STB0899_MATCSTL , 0x00 }, + { STB0899_UPLCSTM , 0x00 }, + { STB0899_UPLCSTL , 0x00 }, + { STB0899_DFLCSTM , 0x00 }, + { STB0899_DFLCSTL , 0x00 }, + { STB0899_SYNCCST , 0x00 }, + { STB0899_SYNCDCSTM , 0x00 }, + { STB0899_SYNCDCSTL , 0x00 }, + { STB0899_ISI_ENTRY , 0x00 }, + { STB0899_ISI_BIT_EN , 0x00 }, + { STB0899_MATSTRM , 0x00 }, + { STB0899_MATSTRL , 0x00 }, + { STB0899_UPLSTRM , 0x00 }, + { STB0899_UPLSTRL , 0x00 }, + { STB0899_DFLSTRM , 0x00 }, + { STB0899_DFLSTRL , 0x00 }, + { STB0899_SYNCSTR , 0x00 }, + { STB0899_SYNCDSTRM , 0x00 }, + { STB0899_SYNCDSTRL , 0x00 }, + { STB0899_CFGPDELSTATUS1 , 0x10 }, + { STB0899_CFGPDELSTATUS2 , 0x00 }, + { STB0899_BBFERRORM , 0x00 }, + { STB0899_BBFERRORL , 0x00 }, + { STB0899_UPKTERRORM , 0x00 }, + { STB0899_UPKTERRORL , 0x00 }, + { 0xffff , 0xff }, +}; + +/* STB0899 demodulator config for the KNC1 and clones */ +static struct stb0899_config knc1_dvbs2_config = { + .init_dev = knc1_stb0899_s1_init_1, + .init_s2_demod = stb0899_s2_init_2, + .init_s1_demod = knc1_stb0899_s1_init_3, + .init_s2_fec = stb0899_s2_init_4, + .init_tst = stb0899_s1_init_5, + + .postproc = NULL, + + .demod_address = 0x68, +// .ts_output_mode = STB0899_OUT_PARALLEL, /* types = SERIAL/PARALLEL */ + .block_sync_mode = STB0899_SYNC_FORCED, /* DSS, SYNC_FORCED/UNSYNCED */ +// .ts_pfbit_toggle = STB0899_MPEG_NORMAL, /* DirecTV, MPEG toggling seq */ + + .xtal_freq = 27000000, + .inversion = IQ_SWAP_OFF, /* 1 */ + + .lo_clk = 76500000, + .hi_clk = 90000000, + + .esno_ave = STB0899_DVBS2_ESNO_AVE, + .esno_quant = STB0899_DVBS2_ESNO_QUANT, + .avframes_coarse = STB0899_DVBS2_AVFRAMES_COARSE, + .avframes_fine = STB0899_DVBS2_AVFRAMES_FINE, + .miss_threshold = STB0899_DVBS2_MISS_THRESHOLD, + .uwp_threshold_acq = STB0899_DVBS2_UWP_THRESHOLD_ACQ, + .uwp_threshold_track = STB0899_DVBS2_UWP_THRESHOLD_TRACK, + .uwp_threshold_sof = STB0899_DVBS2_UWP_THRESHOLD_SOF, + .sof_search_timeout = STB0899_DVBS2_SOF_SEARCH_TIMEOUT, + + .btr_nco_bits = STB0899_DVBS2_BTR_NCO_BITS, + .btr_gain_shift_offset = STB0899_DVBS2_BTR_GAIN_SHIFT_OFFSET, + .crl_nco_bits = STB0899_DVBS2_CRL_NCO_BITS, + .ldpc_max_iter = STB0899_DVBS2_LDPC_MAX_ITER, + + .tuner_get_frequency = tda8261_get_frequency, + .tuner_set_frequency = tda8261_set_frequency, + .tuner_set_bandwidth = NULL, + .tuner_get_bandwidth = tda8261_get_bandwidth, + .tuner_set_rfsiggain = NULL +}; + +/* + * SD1878/SHA tuner config + * 1F, Single I/P, Horizontal mount, High Sensitivity + */ +static const struct tda8261_config sd1878c_config = { +// .name = "SD1878/SHA", + .addr = 0x60, + .step_size = TDA8261_STEP_1000 /* kHz */ +}; + +static u8 read_pwm(struct budget_av *budget_av) +{ + u8 b = 0xff; + u8 pwm; + struct i2c_msg msg[] = { {.addr = 0x50,.flags = 0,.buf = &b,.len = 1}, + {.addr = 0x50,.flags = I2C_M_RD,.buf = &pwm,.len = 1} + }; + + if ((i2c_transfer(&budget_av->budget.i2c_adap, msg, 2) != 2) + || (pwm == 0xff)) + pwm = 0x48; + + return pwm; +} + +#define SUBID_DVBS_KNC1 0x0010 +#define SUBID_DVBS_KNC1_PLUS 0x0011 +#define SUBID_DVBS_TYPHOON 0x4f56 +#define SUBID_DVBS_CINERGY1200 0x1154 +#define SUBID_DVBS_CYNERGY1200N 0x1155 +#define SUBID_DVBS_TV_STAR 0x0014 +#define SUBID_DVBS_TV_STAR_PLUS_X4 0x0015 +#define SUBID_DVBS_TV_STAR_CI 0x0016 +#define SUBID_DVBS2_KNC1 0x0018 +#define SUBID_DVBS2_KNC1_OEM 0x0019 +#define SUBID_DVBS_EASYWATCH_1 0x001a +#define SUBID_DVBS_EASYWATCH_2 0x001b +#define SUBID_DVBS2_EASYWATCH 0x001d +#define SUBID_DVBS_EASYWATCH 0x001e + +#define SUBID_DVBC_EASYWATCH 0x002a +#define SUBID_DVBC_EASYWATCH_MK3 0x002c +#define SUBID_DVBC_KNC1 0x0020 +#define SUBID_DVBC_KNC1_PLUS 0x0021 +#define SUBID_DVBC_KNC1_MK3 0x0022 +#define SUBID_DVBC_KNC1_TDA10024 0x0028 +#define SUBID_DVBC_KNC1_PLUS_MK3 0x0023 +#define SUBID_DVBC_CINERGY1200 0x1156 +#define SUBID_DVBC_CINERGY1200_MK3 0x1176 + +#define SUBID_DVBT_EASYWATCH 0x003a +#define SUBID_DVBT_KNC1_PLUS 0x0031 +#define SUBID_DVBT_KNC1 0x0030 +#define SUBID_DVBT_CINERGY1200 0x1157 + +static void frontend_init(struct budget_av *budget_av) +{ + struct saa7146_dev * saa = budget_av->budget.dev; + struct dvb_frontend * fe = NULL; + + /* Enable / PowerON Frontend */ + saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTLO); + + /* Wait for PowerON */ + msleep(100); + + /* additional setup necessary for the PLUS cards */ + switch (saa->pci->subsystem_device) { + case SUBID_DVBS_KNC1_PLUS: + case SUBID_DVBC_KNC1_PLUS: + case SUBID_DVBT_KNC1_PLUS: + case SUBID_DVBC_EASYWATCH: + case SUBID_DVBC_KNC1_PLUS_MK3: + case SUBID_DVBS2_KNC1: + case SUBID_DVBS2_KNC1_OEM: + case SUBID_DVBS2_EASYWATCH: + saa7146_setgpio(saa, 3, SAA7146_GPIO_OUTHI); + break; + } + + switch (saa->pci->subsystem_device) { + + case SUBID_DVBS_KNC1: + /* + * maybe that setting is needed for other dvb-s cards as well, + * but so far it has been only confirmed for this type + */ + budget_av->reinitialise_demod = 1; + /* fall through */ + case SUBID_DVBS_KNC1_PLUS: + case SUBID_DVBS_EASYWATCH_1: + if (saa->pci->subsystem_vendor == 0x1894) { + fe = dvb_attach(stv0299_attach, &cinergy_1200s_1894_0010_config, + &budget_av->budget.i2c_adap); + if (fe) { + dvb_attach(tua6100_attach, fe, 0x60, &budget_av->budget.i2c_adap); + } + } else { + fe = dvb_attach(stv0299_attach, &typhoon_config, + &budget_av->budget.i2c_adap); + if (fe) { + fe->ops.tuner_ops.set_params = philips_su1278_ty_ci_tuner_set_params; + } + } + break; + + case SUBID_DVBS_TV_STAR: + case SUBID_DVBS_TV_STAR_PLUS_X4: + case SUBID_DVBS_TV_STAR_CI: + case SUBID_DVBS_CYNERGY1200N: + case SUBID_DVBS_EASYWATCH: + case SUBID_DVBS_EASYWATCH_2: + fe = dvb_attach(stv0299_attach, &philips_sd1878_config, + &budget_av->budget.i2c_adap); + if (fe) { + dvb_attach(dvb_pll_attach, fe, 0x60, + &budget_av->budget.i2c_adap, + DVB_PLL_PHILIPS_SD1878_TDA8261); + } + break; + + case SUBID_DVBS_TYPHOON: + fe = dvb_attach(stv0299_attach, &typhoon_config, + &budget_av->budget.i2c_adap); + if (fe) { + fe->ops.tuner_ops.set_params = philips_su1278_ty_ci_tuner_set_params; + } + break; + case SUBID_DVBS2_KNC1: + case SUBID_DVBS2_KNC1_OEM: + case SUBID_DVBS2_EASYWATCH: + budget_av->reinitialise_demod = 1; + if ((fe = dvb_attach(stb0899_attach, &knc1_dvbs2_config, &budget_av->budget.i2c_adap))) + dvb_attach(tda8261_attach, fe, &sd1878c_config, &budget_av->budget.i2c_adap); + + break; + case SUBID_DVBS_CINERGY1200: + fe = dvb_attach(stv0299_attach, &cinergy_1200s_config, + &budget_av->budget.i2c_adap); + if (fe) { + fe->ops.tuner_ops.set_params = philips_su1278_ty_ci_tuner_set_params; + } + break; + + case SUBID_DVBC_KNC1: + case SUBID_DVBC_KNC1_PLUS: + case SUBID_DVBC_CINERGY1200: + case SUBID_DVBC_EASYWATCH: + budget_av->reinitialise_demod = 1; + budget_av->budget.dev->i2c_bitrate = SAA7146_I2C_BUS_BIT_RATE_240; + fe = dvb_attach(tda10021_attach, &philips_cu1216_config, + &budget_av->budget.i2c_adap, + read_pwm(budget_av)); + if (fe == NULL) + fe = dvb_attach(tda10021_attach, &philips_cu1216_config_altaddress, + &budget_av->budget.i2c_adap, + read_pwm(budget_av)); + if (fe) { + fe->ops.tuner_ops.set_params = philips_cu1216_tuner_set_params; + } + break; + + case SUBID_DVBC_EASYWATCH_MK3: + case SUBID_DVBC_CINERGY1200_MK3: + case SUBID_DVBC_KNC1_MK3: + case SUBID_DVBC_KNC1_TDA10024: + case SUBID_DVBC_KNC1_PLUS_MK3: + budget_av->reinitialise_demod = 1; + budget_av->budget.dev->i2c_bitrate = SAA7146_I2C_BUS_BIT_RATE_240; + fe = dvb_attach(tda10023_attach, + &philips_cu1216_tda10023_config, + &budget_av->budget.i2c_adap, + read_pwm(budget_av)); + if (fe) { + fe->ops.tuner_ops.set_params = philips_cu1216_tuner_set_params; + } + break; + + case SUBID_DVBT_EASYWATCH: + case SUBID_DVBT_KNC1: + case SUBID_DVBT_KNC1_PLUS: + case SUBID_DVBT_CINERGY1200: + budget_av->reinitialise_demod = 1; + fe = dvb_attach(tda10046_attach, &philips_tu1216_config, + &budget_av->budget.i2c_adap); + if (fe) { + fe->ops.tuner_ops.init = philips_tu1216_tuner_init; + fe->ops.tuner_ops.set_params = philips_tu1216_tuner_set_params; + } + break; + } + + if (fe == NULL) { + pr_err("A frontend driver was not found for device [%04x:%04x] subsystem [%04x:%04x]\n", + saa->pci->vendor, + saa->pci->device, + saa->pci->subsystem_vendor, + saa->pci->subsystem_device); + return; + } + + budget_av->budget.dvb_frontend = fe; + + if (dvb_register_frontend(&budget_av->budget.dvb_adapter, + budget_av->budget.dvb_frontend)) { + pr_err("Frontend registration failed!\n"); + dvb_frontend_detach(budget_av->budget.dvb_frontend); + budget_av->budget.dvb_frontend = NULL; + } +} + + +static void budget_av_irq(struct saa7146_dev *dev, u32 * isr) +{ + struct budget_av *budget_av = (struct budget_av *) dev->ext_priv; + + dprintk(8, "dev: %p, budget_av: %p\n", dev, budget_av); + + if (*isr & MASK_10) + ttpci_budget_irq10_handler(dev, isr); +} + +static int budget_av_detach(struct saa7146_dev *dev) +{ + struct budget_av *budget_av = (struct budget_av *) dev->ext_priv; + int err; + + dprintk(2, "dev: %p\n", dev); + + if (1 == budget_av->has_saa7113) { + saa7146_setgpio(dev, 0, SAA7146_GPIO_OUTLO); + + msleep(200); + + saa7146_unregister_device(&budget_av->vd, dev); + + saa7146_vv_release(dev); + } + + if (budget_av->budget.ci_present) + ciintf_deinit(budget_av); + + if (budget_av->budget.dvb_frontend != NULL) { + dvb_unregister_frontend(budget_av->budget.dvb_frontend); + dvb_frontend_detach(budget_av->budget.dvb_frontend); + } + err = ttpci_budget_deinit(&budget_av->budget); + + kfree(budget_av); + + return err; +} + +#define KNC1_INPUTS 2 +static struct v4l2_input knc1_inputs[KNC1_INPUTS] = { + { 0, "Composite", V4L2_INPUT_TYPE_TUNER, 1, 0, + V4L2_STD_PAL_BG | V4L2_STD_NTSC_M, 0, V4L2_IN_CAP_STD }, + { 1, "S-Video", V4L2_INPUT_TYPE_CAMERA, 2, 0, + V4L2_STD_PAL_BG | V4L2_STD_NTSC_M, 0, V4L2_IN_CAP_STD }, +}; + +static int vidioc_enum_input(struct file *file, void *fh, struct v4l2_input *i) +{ + dprintk(1, "VIDIOC_ENUMINPUT %d\n", i->index); + if (i->index >= KNC1_INPUTS) + return -EINVAL; + memcpy(i, &knc1_inputs[i->index], sizeof(struct v4l2_input)); + return 0; +} + +static int vidioc_g_input(struct file *file, void *fh, unsigned int *i) +{ + struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev; + struct budget_av *budget_av = (struct budget_av *)dev->ext_priv; + + *i = budget_av->cur_input; + + dprintk(1, "VIDIOC_G_INPUT %d\n", *i); + return 0; +} + +static int vidioc_s_input(struct file *file, void *fh, unsigned int input) +{ + struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev; + struct budget_av *budget_av = (struct budget_av *)dev->ext_priv; + + dprintk(1, "VIDIOC_S_INPUT %d\n", input); + return saa7113_setinput(budget_av, input); +} + +static struct saa7146_ext_vv vv_data; + +static int budget_av_attach(struct saa7146_dev *dev, struct saa7146_pci_extension_data *info) +{ + struct budget_av *budget_av; + u8 *mac; + int err; + + dprintk(2, "dev: %p\n", dev); + + if (!(budget_av = kzalloc(sizeof(struct budget_av), GFP_KERNEL))) + return -ENOMEM; + + budget_av->has_saa7113 = 0; + budget_av->budget.ci_present = 0; + + dev->ext_priv = budget_av; + + err = ttpci_budget_init(&budget_av->budget, dev, info, THIS_MODULE, + adapter_nr); + if (err) { + kfree(budget_av); + return err; + } + + /* knc1 initialization */ + saa7146_write(dev, DD1_STREAM_B, 0x04000000); + saa7146_write(dev, DD1_INIT, 0x07000600); + saa7146_write(dev, MC2, MASK_09 | MASK_25 | MASK_10 | MASK_26); + + if (saa7113_init(budget_av) == 0) { + budget_av->has_saa7113 = 1; + + if (0 != saa7146_vv_init(dev, &vv_data)) { + /* fixme: proper cleanup here */ + ERR("cannot init vv subsystem\n"); + return err; + } + vv_data.ops.vidioc_enum_input = vidioc_enum_input; + vv_data.ops.vidioc_g_input = vidioc_g_input; + vv_data.ops.vidioc_s_input = vidioc_s_input; + + if ((err = saa7146_register_device(&budget_av->vd, dev, "knc1", VFL_TYPE_GRABBER))) { + /* fixme: proper cleanup here */ + ERR("cannot register capture v4l2 device\n"); + saa7146_vv_release(dev); + return err; + } + + /* beware: this modifies dev->vv ... */ + saa7146_set_hps_source_and_sync(dev, SAA7146_HPS_SOURCE_PORT_A, + SAA7146_HPS_SYNC_PORT_A); + + saa7113_setinput(budget_av, 0); + } + + /* fixme: find some sane values here... */ + saa7146_write(dev, PCI_BT_V1, 0x1c00101f); + + mac = budget_av->budget.dvb_adapter.proposed_mac; + if (i2c_readregs(&budget_av->budget.i2c_adap, 0xa0, 0x30, mac, 6)) { + pr_err("KNC1-%d: Could not read MAC from KNC1 card\n", + budget_av->budget.dvb_adapter.num); + memset(mac, 0, 6); + } else { + pr_info("KNC1-%d: MAC addr = %pM\n", + budget_av->budget.dvb_adapter.num, mac); + } + + budget_av->budget.dvb_adapter.priv = budget_av; + frontend_init(budget_av); + ciintf_init(budget_av); + + ttpci_budget_init_hooks(&budget_av->budget); + + return 0; +} + +static struct saa7146_standard standard[] = { + {.name = "PAL",.id = V4L2_STD_PAL, + .v_offset = 0x17,.v_field = 288, + .h_offset = 0x14,.h_pixels = 680, + .v_max_out = 576,.h_max_out = 768 }, + + {.name = "NTSC",.id = V4L2_STD_NTSC, + .v_offset = 0x16,.v_field = 240, + .h_offset = 0x06,.h_pixels = 708, + .v_max_out = 480,.h_max_out = 640, }, +}; + +static struct saa7146_ext_vv vv_data = { + .inputs = 2, + .capabilities = 0, // perhaps later: V4L2_CAP_VBI_CAPTURE, but that need tweaking with the saa7113 + .flags = 0, + .stds = &standard[0], + .num_stds = ARRAY_SIZE(standard), +}; + +static struct saa7146_extension budget_extension; + +MAKE_BUDGET_INFO(knc1s, "KNC1 DVB-S", BUDGET_KNC1S); +MAKE_BUDGET_INFO(knc1s2,"KNC1 DVB-S2", BUDGET_KNC1S2); +MAKE_BUDGET_INFO(sates2,"Satelco EasyWatch DVB-S2", BUDGET_KNC1S2); +MAKE_BUDGET_INFO(knc1c, "KNC1 DVB-C", BUDGET_KNC1C); +MAKE_BUDGET_INFO(knc1t, "KNC1 DVB-T", BUDGET_KNC1T); +MAKE_BUDGET_INFO(kncxs, "KNC TV STAR DVB-S", BUDGET_TVSTAR); +MAKE_BUDGET_INFO(satewpls, "Satelco EasyWatch DVB-S light", BUDGET_TVSTAR); +MAKE_BUDGET_INFO(satewpls1, "Satelco EasyWatch DVB-S light", BUDGET_KNC1S); +MAKE_BUDGET_INFO(satewps, "Satelco EasyWatch DVB-S", BUDGET_KNC1S); +MAKE_BUDGET_INFO(satewplc, "Satelco EasyWatch DVB-C", BUDGET_KNC1CP); +MAKE_BUDGET_INFO(satewcmk3, "Satelco EasyWatch DVB-C MK3", BUDGET_KNC1C_MK3); +MAKE_BUDGET_INFO(satewt, "Satelco EasyWatch DVB-T", BUDGET_KNC1T); +MAKE_BUDGET_INFO(knc1sp, "KNC1 DVB-S Plus", BUDGET_KNC1SP); +MAKE_BUDGET_INFO(knc1spx4, "KNC1 DVB-S Plus X4", BUDGET_KNC1SP); +MAKE_BUDGET_INFO(knc1cp, "KNC1 DVB-C Plus", BUDGET_KNC1CP); +MAKE_BUDGET_INFO(knc1cmk3, "KNC1 DVB-C MK3", BUDGET_KNC1C_MK3); +MAKE_BUDGET_INFO(knc1ctda10024, "KNC1 DVB-C TDA10024", BUDGET_KNC1C_TDA10024); +MAKE_BUDGET_INFO(knc1cpmk3, "KNC1 DVB-C Plus MK3", BUDGET_KNC1CP_MK3); +MAKE_BUDGET_INFO(knc1tp, "KNC1 DVB-T Plus", BUDGET_KNC1TP); +MAKE_BUDGET_INFO(cin1200s, "TerraTec Cinergy 1200 DVB-S", BUDGET_CIN1200S); +MAKE_BUDGET_INFO(cin1200sn, "TerraTec Cinergy 1200 DVB-S", BUDGET_CIN1200S); +MAKE_BUDGET_INFO(cin1200c, "Terratec Cinergy 1200 DVB-C", BUDGET_CIN1200C); +MAKE_BUDGET_INFO(cin1200cmk3, "Terratec Cinergy 1200 DVB-C MK3", BUDGET_CIN1200C_MK3); +MAKE_BUDGET_INFO(cin1200t, "Terratec Cinergy 1200 DVB-T", BUDGET_CIN1200T); + +static struct pci_device_id pci_tbl[] = { + MAKE_EXTENSION_PCI(knc1s, 0x1131, 0x4f56), + MAKE_EXTENSION_PCI(knc1s, 0x1131, 0x0010), + MAKE_EXTENSION_PCI(knc1s, 0x1894, 0x0010), + MAKE_EXTENSION_PCI(knc1sp, 0x1131, 0x0011), + MAKE_EXTENSION_PCI(knc1sp, 0x1894, 0x0011), + MAKE_EXTENSION_PCI(kncxs, 0x1894, 0x0014), + MAKE_EXTENSION_PCI(knc1spx4, 0x1894, 0x0015), + MAKE_EXTENSION_PCI(kncxs, 0x1894, 0x0016), + MAKE_EXTENSION_PCI(knc1s2, 0x1894, 0x0018), + MAKE_EXTENSION_PCI(knc1s2, 0x1894, 0x0019), + MAKE_EXTENSION_PCI(sates2, 0x1894, 0x001d), + MAKE_EXTENSION_PCI(satewpls, 0x1894, 0x001e), + MAKE_EXTENSION_PCI(satewpls1, 0x1894, 0x001a), + MAKE_EXTENSION_PCI(satewps, 0x1894, 0x001b), + MAKE_EXTENSION_PCI(satewplc, 0x1894, 0x002a), + MAKE_EXTENSION_PCI(satewcmk3, 0x1894, 0x002c), + MAKE_EXTENSION_PCI(satewt, 0x1894, 0x003a), + MAKE_EXTENSION_PCI(knc1c, 0x1894, 0x0020), + MAKE_EXTENSION_PCI(knc1cp, 0x1894, 0x0021), + MAKE_EXTENSION_PCI(knc1cmk3, 0x1894, 0x0022), + MAKE_EXTENSION_PCI(knc1ctda10024, 0x1894, 0x0028), + MAKE_EXTENSION_PCI(knc1cpmk3, 0x1894, 0x0023), + MAKE_EXTENSION_PCI(knc1t, 0x1894, 0x0030), + MAKE_EXTENSION_PCI(knc1tp, 0x1894, 0x0031), + MAKE_EXTENSION_PCI(cin1200s, 0x153b, 0x1154), + MAKE_EXTENSION_PCI(cin1200sn, 0x153b, 0x1155), + MAKE_EXTENSION_PCI(cin1200c, 0x153b, 0x1156), + MAKE_EXTENSION_PCI(cin1200cmk3, 0x153b, 0x1176), + MAKE_EXTENSION_PCI(cin1200t, 0x153b, 0x1157), + { + .vendor = 0, + } +}; + +MODULE_DEVICE_TABLE(pci, pci_tbl); + +static struct saa7146_extension budget_extension = { + .name = "budget_av", + .flags = SAA7146_USE_I2C_IRQ, + + .pci_tbl = pci_tbl, + + .module = THIS_MODULE, + .attach = budget_av_attach, + .detach = budget_av_detach, + + .irq_mask = MASK_10, + .irq_func = budget_av_irq, +}; + +static int __init budget_av_init(void) +{ + return saa7146_register_extension(&budget_extension); +} + +static void __exit budget_av_exit(void) +{ + saa7146_unregister_extension(&budget_extension); +} + +module_init(budget_av_init); +module_exit(budget_av_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Ralph Metzler, Marcus Metzler, Michael Hunold, others"); +MODULE_DESCRIPTION("driver for the SAA7146 based so-called " + "budget PCI DVB w/ analog input and CI-module (e.g. the KNC cards)"); |