diff options
Diffstat (limited to 'drivers/media/dvb/dvb-usb/rtl28xxu.h')
| -rw-r--r-- | drivers/media/dvb/dvb-usb/rtl28xxu.h | 264 |
1 files changed, 264 insertions, 0 deletions
diff --git a/drivers/media/dvb/dvb-usb/rtl28xxu.h b/drivers/media/dvb/dvb-usb/rtl28xxu.h new file mode 100644 index 00000000..90f3bb4f --- /dev/null +++ b/drivers/media/dvb/dvb-usb/rtl28xxu.h @@ -0,0 +1,264 @@ +/* + * Realtek RTL28xxU DVB USB driver + * + * Copyright (C) 2009 Antti Palosaari <crope@iki.fi> + * Copyright (C) 2011 Antti Palosaari <crope@iki.fi> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#ifndef RTL28XXU_H +#define RTL28XXU_H + +#define DVB_USB_LOG_PREFIX "rtl28xxu" +#include "dvb-usb.h" + +#define deb_info(args...) dprintk(dvb_usb_rtl28xxu_debug, 0x01, args) +#define deb_rc(args...) dprintk(dvb_usb_rtl28xxu_debug, 0x02, args) +#define deb_xfer(args...) dprintk(dvb_usb_rtl28xxu_debug, 0x04, args) +#define deb_reg(args...) dprintk(dvb_usb_rtl28xxu_debug, 0x08, args) +#define deb_i2c(args...) dprintk(dvb_usb_rtl28xxu_debug, 0x10, args) +#define deb_fw(args...) dprintk(dvb_usb_rtl28xxu_debug, 0x20, args) + +#define deb_dump(r, t, v, i, b, l, func) { \ + int loop_; \ + func("%02x %02x %02x %02x %02x %02x %02x %02x", \ + t, r, v & 0xff, v >> 8, i & 0xff, i >> 8, l & 0xff, l >> 8); \ + if (t == (USB_TYPE_VENDOR | USB_DIR_OUT)) \ + func(" >>> "); \ + else \ + func(" <<< "); \ + for (loop_ = 0; loop_ < l; loop_++) \ + func("%02x ", b[loop_]); \ + func("\n");\ +} + +/* + * USB commands + * (usb_control_msg() index parameter) + */ + +#define DEMOD 0x0000 +#define USB 0x0100 +#define SYS 0x0200 +#define I2C 0x0300 +#define I2C_DA 0x0600 + +#define CMD_WR_FLAG 0x0010 +#define CMD_DEMOD_RD 0x0000 +#define CMD_DEMOD_WR 0x0010 +#define CMD_USB_RD 0x0100 +#define CMD_USB_WR 0x0110 +#define CMD_SYS_RD 0x0200 +#define CMD_IR_RD 0x0201 +#define CMD_IR_WR 0x0211 +#define CMD_SYS_WR 0x0210 +#define CMD_I2C_RD 0x0300 +#define CMD_I2C_WR 0x0310 +#define CMD_I2C_DA_RD 0x0600 +#define CMD_I2C_DA_WR 0x0610 + + +struct rtl28xxu_priv { + u8 chip_id; + u8 tuner; + u8 page; /* integrated demod active register page */ + bool rc_active; +}; + +enum rtl28xxu_chip_id { + CHIP_ID_NONE, + CHIP_ID_RTL2831U, + CHIP_ID_RTL2832U, +}; + +enum rtl28xxu_tuner { + TUNER_NONE, + + TUNER_RTL2830_QT1010, + TUNER_RTL2830_MT2060, + TUNER_RTL2830_MXL5005S, + + TUNER_RTL2832_MT2266, + TUNER_RTL2832_FC2580, + TUNER_RTL2832_MT2063, + TUNER_RTL2832_MAX3543, + TUNER_RTL2832_TUA9001, + TUNER_RTL2832_MXL5007T, + TUNER_RTL2832_FC0012, + TUNER_RTL2832_E4000, + TUNER_RTL2832_TDA18272, + TUNER_RTL2832_FC0013, +}; + +struct rtl28xxu_req { + u16 value; + u16 index; + u16 size; + u8 *data; +}; + +struct rtl28xxu_reg_val { + u16 reg; + u8 val; +}; + +/* + * memory map + * + * 0x0000 DEMOD : demodulator + * 0x2000 USB : SIE, USB endpoint, debug, DMA + * 0x3000 SYS : system + * 0xfc00 RC : remote controller (not RTL2831U) + */ + +/* + * USB registers + */ +/* SIE Control Registers */ +#define USB_SYSCTL 0x2000 /* USB system control */ +#define USB_SYSCTL_0 0x2000 /* USB system control */ +#define USB_SYSCTL_1 0x2001 /* USB system control */ +#define USB_SYSCTL_2 0x2002 /* USB system control */ +#define USB_SYSCTL_3 0x2003 /* USB system control */ +#define USB_IRQSTAT 0x2008 /* SIE interrupt status */ +#define USB_IRQEN 0x200C /* SIE interrupt enable */ +#define USB_CTRL 0x2010 /* USB control */ +#define USB_STAT 0x2014 /* USB status */ +#define USB_DEVADDR 0x2018 /* USB device address */ +#define USB_TEST 0x201C /* USB test mode */ +#define USB_FRAME_NUMBER 0x2020 /* frame number */ +#define USB_FIFO_ADDR 0x2028 /* address of SIE FIFO RAM */ +#define USB_FIFO_CMD 0x202A /* SIE FIFO RAM access command */ +#define USB_FIFO_DATA 0x2030 /* SIE FIFO RAM data */ +/* Endpoint Registers */ +#define EP0_SETUPA 0x20F8 /* EP 0 setup packet lower byte */ +#define EP0_SETUPB 0x20FC /* EP 0 setup packet higher byte */ +#define USB_EP0_CFG 0x2104 /* EP 0 configure */ +#define USB_EP0_CTL 0x2108 /* EP 0 control */ +#define USB_EP0_STAT 0x210C /* EP 0 status */ +#define USB_EP0_IRQSTAT 0x2110 /* EP 0 interrupt status */ +#define USB_EP0_IRQEN 0x2114 /* EP 0 interrupt enable */ +#define USB_EP0_MAXPKT 0x2118 /* EP 0 max packet size */ +#define USB_EP0_BC 0x2120 /* EP 0 FIFO byte counter */ +#define USB_EPA_CFG 0x2144 /* EP A configure */ +#define USB_EPA_CFG_0 0x2144 /* EP A configure */ +#define USB_EPA_CFG_1 0x2145 /* EP A configure */ +#define USB_EPA_CFG_2 0x2146 /* EP A configure */ +#define USB_EPA_CFG_3 0x2147 /* EP A configure */ +#define USB_EPA_CTL 0x2148 /* EP A control */ +#define USB_EPA_CTL_0 0x2148 /* EP A control */ +#define USB_EPA_CTL_1 0x2149 /* EP A control */ +#define USB_EPA_CTL_2 0x214A /* EP A control */ +#define USB_EPA_CTL_3 0x214B /* EP A control */ +#define USB_EPA_STAT 0x214C /* EP A status */ +#define USB_EPA_IRQSTAT 0x2150 /* EP A interrupt status */ +#define USB_EPA_IRQEN 0x2154 /* EP A interrupt enable */ +#define USB_EPA_MAXPKT 0x2158 /* EP A max packet size */ +#define USB_EPA_MAXPKT_0 0x2158 /* EP A max packet size */ +#define USB_EPA_MAXPKT_1 0x2159 /* EP A max packet size */ +#define USB_EPA_MAXPKT_2 0x215A /* EP A max packet size */ +#define USB_EPA_MAXPKT_3 0x215B /* EP A max packet size */ +#define USB_EPA_FIFO_CFG 0x2160 /* EP A FIFO configure */ +#define USB_EPA_FIFO_CFG_0 0x2160 /* EP A FIFO configure */ +#define USB_EPA_FIFO_CFG_1 0x2161 /* EP A FIFO configure */ +#define USB_EPA_FIFO_CFG_2 0x2162 /* EP A FIFO configure */ +#define USB_EPA_FIFO_CFG_3 0x2163 /* EP A FIFO configure */ +/* Debug Registers */ +#define USB_PHYTSTDIS 0x2F04 /* PHY test disable */ +#define USB_TOUT_VAL 0x2F08 /* USB time-out time */ +#define USB_VDRCTRL 0x2F10 /* UTMI vendor signal control */ +#define USB_VSTAIN 0x2F14 /* UTMI vendor signal status in */ +#define USB_VLOADM 0x2F18 /* UTMI load vendor signal status in */ +#define USB_VSTAOUT 0x2F1C /* UTMI vendor signal status out */ +#define USB_UTMI_TST 0x2F80 /* UTMI test */ +#define USB_UTMI_STATUS 0x2F84 /* UTMI status */ +#define USB_TSTCTL 0x2F88 /* test control */ +#define USB_TSTCTL2 0x2F8C /* test control 2 */ +#define USB_PID_FORCE 0x2F90 /* force PID */ +#define USB_PKTERR_CNT 0x2F94 /* packet error counter */ +#define USB_RXERR_CNT 0x2F98 /* RX error counter */ +#define USB_MEM_BIST 0x2F9C /* MEM BIST test */ +#define USB_SLBBIST 0x2FA0 /* self-loop-back BIST */ +#define USB_CNTTEST 0x2FA4 /* counter test */ +#define USB_PHYTST 0x2FC0 /* USB PHY test */ +#define USB_DBGIDX 0x2FF0 /* select individual block debug signal */ +#define USB_DBGMUX 0x2FF4 /* debug signal module mux */ + +/* + * SYS registers + */ +/* demod control registers */ +#define SYS_SYS0 0x3000 /* include DEMOD_CTL, GPO, GPI, GPOE */ +#define SYS_DEMOD_CTL 0x3000 /* control register for DVB-T demodulator */ +/* GPIO registers */ +#define SYS_GPIO_OUT_VAL 0x3001 /* output value of GPIO */ +#define SYS_GPIO_IN_VAL 0x3002 /* input value of GPIO */ +#define SYS_GPIO_OUT_EN 0x3003 /* output enable of GPIO */ +#define SYS_SYS1 0x3004 /* include GPD, SYSINTE, SYSINTS, GP_CFG0 */ +#define SYS_GPIO_DIR 0x3004 /* direction control for GPIO */ +#define SYS_SYSINTE 0x3005 /* system interrupt enable */ +#define SYS_SYSINTS 0x3006 /* system interrupt status */ +#define SYS_GPIO_CFG0 0x3007 /* PAD configuration for GPIO0-GPIO3 */ +#define SYS_SYS2 0x3008 /* include GP_CFG1 and 3 reserved bytes */ +#define SYS_GPIO_CFG1 0x3008 /* PAD configuration for GPIO4 */ +#define SYS_DEMOD_CTL1 0x300B + +/* IrDA registers */ +#define SYS_IRRC_PSR 0x3020 /* IR protocol selection */ +#define SYS_IRRC_PER 0x3024 /* IR protocol extension */ +#define SYS_IRRC_SF 0x3028 /* IR sampling frequency */ +#define SYS_IRRC_DPIR 0x302C /* IR data package interval */ +#define SYS_IRRC_CR 0x3030 /* IR control */ +#define SYS_IRRC_RP 0x3034 /* IR read port */ +#define SYS_IRRC_SR 0x3038 /* IR status */ +/* I2C master registers */ +#define SYS_I2CCR 0x3040 /* I2C clock */ +#define SYS_I2CMCR 0x3044 /* I2C master control */ +#define SYS_I2CMSTR 0x3048 /* I2C master SCL timing */ +#define SYS_I2CMSR 0x304C /* I2C master status */ +#define SYS_I2CMFR 0x3050 /* I2C master FIFO */ + +/* + * IR registers + */ +#define IR_RX_BUF 0xFC00 +#define IR_RX_IE 0xFD00 +#define IR_RX_IF 0xFD01 +#define IR_RX_CTRL 0xFD02 +#define IR_RX_CFG 0xFD03 +#define IR_MAX_DURATION0 0xFD04 +#define IR_MAX_DURATION1 0xFD05 +#define IR_IDLE_LEN0 0xFD06 +#define IR_IDLE_LEN1 0xFD07 +#define IR_GLITCH_LEN 0xFD08 +#define IR_RX_BUF_CTRL 0xFD09 +#define IR_RX_BUF_DATA 0xFD0A +#define IR_RX_BC 0xFD0B +#define IR_RX_CLK 0xFD0C +#define IR_RX_C_COUNT_L 0xFD0D +#define IR_RX_C_COUNT_H 0xFD0E +#define IR_SUSPEND_CTRL 0xFD10 +#define IR_ERR_TOL_CTRL 0xFD11 +#define IR_UNIT_LEN 0xFD12 +#define IR_ERR_TOL_LEN 0xFD13 +#define IR_MAX_H_TOL_LEN 0xFD14 +#define IR_MAX_L_TOL_LEN 0xFD15 +#define IR_MASK_CTRL 0xFD16 +#define IR_MASK_DATA 0xFD17 +#define IR_RES_MASK_ADDR 0xFD18 +#define IR_RES_MASK_T_LEN 0xFD19 + +#endif |