diff options
Diffstat (limited to 'drivers/media/dvb/bt8xx/bt878.c')
-rw-r--r-- | drivers/media/dvb/bt8xx/bt878.c | 609 |
1 files changed, 609 insertions, 0 deletions
diff --git a/drivers/media/dvb/bt8xx/bt878.c b/drivers/media/dvb/bt8xx/bt878.c new file mode 100644 index 00000000..b34fa951 --- /dev/null +++ b/drivers/media/dvb/bt8xx/bt878.c @@ -0,0 +1,609 @@ +/* + * bt878.c: part of the driver for the Pinnacle PCTV Sat DVB PCI card + * + * Copyright (C) 2002 Peter Hettkamp <peter.hettkamp@htp-tel.de> + * + * large parts based on the bttv driver + * Copyright (C) 1996,97,98 Ralph Metzler (rjkm@metzlerbros.de) + * & Marcus Metzler (mocm@metzlerbros.de) + * (c) 1999,2000 Gerd Knorr <kraxel@goldbach.in-berlin.de> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * Or, point your browser to http://www.gnu.org/copyleft/gpl.html + * + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/pci.h> +#include <asm/io.h> +#include <linux/ioport.h> +#include <asm/pgtable.h> +#include <asm/page.h> +#include <linux/types.h> +#include <linux/interrupt.h> +#include <linux/kmod.h> +#include <linux/vmalloc.h> +#include <linux/init.h> + +#include "dmxdev.h" +#include "dvbdev.h" +#include "bt878.h" +#include "dst_priv.h" + + +/**************************************/ +/* Miscellaneous utility definitions */ +/**************************************/ + +static unsigned int bt878_verbose = 1; +static unsigned int bt878_debug; + +module_param_named(verbose, bt878_verbose, int, 0444); +MODULE_PARM_DESC(verbose, + "verbose startup messages, default is 1 (yes)"); +module_param_named(debug, bt878_debug, int, 0644); +MODULE_PARM_DESC(debug, "Turn on/off debugging, default is 0 (off)."); + +int bt878_num; +struct bt878 bt878[BT878_MAX]; + +EXPORT_SYMBOL(bt878_num); +EXPORT_SYMBOL(bt878); + +#define btwrite(dat,adr) bmtwrite((dat), (bt->bt878_mem+(adr))) +#define btread(adr) bmtread(bt->bt878_mem+(adr)) + +#define btand(dat,adr) btwrite((dat) & btread(adr), adr) +#define btor(dat,adr) btwrite((dat) | btread(adr), adr) +#define btaor(dat,mask,adr) btwrite((dat) | ((mask) & btread(adr)), adr) + +#if defined(dprintk) +#undef dprintk +#endif +#define dprintk(fmt, arg...) \ + do { \ + if (bt878_debug) \ + printk(KERN_DEBUG fmt, ##arg); \ + } while (0) + +static void bt878_mem_free(struct bt878 *bt) +{ + if (bt->buf_cpu) { + pci_free_consistent(bt->dev, bt->buf_size, bt->buf_cpu, + bt->buf_dma); + bt->buf_cpu = NULL; + } + + if (bt->risc_cpu) { + pci_free_consistent(bt->dev, bt->risc_size, bt->risc_cpu, + bt->risc_dma); + bt->risc_cpu = NULL; + } +} + +static int bt878_mem_alloc(struct bt878 *bt) +{ + if (!bt->buf_cpu) { + bt->buf_size = 128 * 1024; + + bt->buf_cpu = + pci_alloc_consistent(bt->dev, bt->buf_size, + &bt->buf_dma); + + if (!bt->buf_cpu) + return -ENOMEM; + + memset(bt->buf_cpu, 0, bt->buf_size); + } + + if (!bt->risc_cpu) { + bt->risc_size = PAGE_SIZE; + bt->risc_cpu = + pci_alloc_consistent(bt->dev, bt->risc_size, + &bt->risc_dma); + + if (!bt->risc_cpu) { + bt878_mem_free(bt); + return -ENOMEM; + } + + memset(bt->risc_cpu, 0, bt->risc_size); + } + + return 0; +} + +/* RISC instructions */ +#define RISC_WRITE (0x01 << 28) +#define RISC_JUMP (0x07 << 28) +#define RISC_SYNC (0x08 << 28) + +/* RISC bits */ +#define RISC_WR_SOL (1 << 27) +#define RISC_WR_EOL (1 << 26) +#define RISC_IRQ (1 << 24) +#define RISC_STATUS(status) ((((~status) & 0x0F) << 20) | ((status & 0x0F) << 16)) +#define RISC_SYNC_RESYNC (1 << 15) +#define RISC_SYNC_FM1 0x06 +#define RISC_SYNC_VRO 0x0C + +#define RISC_FLUSH() bt->risc_pos = 0 +#define RISC_INSTR(instr) bt->risc_cpu[bt->risc_pos++] = cpu_to_le32(instr) + +static int bt878_make_risc(struct bt878 *bt) +{ + bt->block_bytes = bt->buf_size >> 4; + bt->block_count = 1 << 4; + bt->line_bytes = bt->block_bytes; + bt->line_count = bt->block_count; + + while (bt->line_bytes > 4095) { + bt->line_bytes >>= 1; + bt->line_count <<= 1; + } + + if (bt->line_count > 255) { + printk(KERN_ERR "bt878: buffer size error!\n"); + return -EINVAL; + } + return 0; +} + + +static void bt878_risc_program(struct bt878 *bt, u32 op_sync_orin) +{ + u32 buf_pos = 0; + u32 line; + + RISC_FLUSH(); + RISC_INSTR(RISC_SYNC | RISC_SYNC_FM1 | op_sync_orin); + RISC_INSTR(0); + + dprintk("bt878: risc len lines %u, bytes per line %u\n", + bt->line_count, bt->line_bytes); + for (line = 0; line < bt->line_count; line++) { + // At the beginning of every block we issue an IRQ with previous (finished) block number set + if (!(buf_pos % bt->block_bytes)) + RISC_INSTR(RISC_WRITE | RISC_WR_SOL | RISC_WR_EOL | + RISC_IRQ | + RISC_STATUS(((buf_pos / + bt->block_bytes) + + (bt->block_count - + 1)) % + bt->block_count) | bt-> + line_bytes); + else + RISC_INSTR(RISC_WRITE | RISC_WR_SOL | RISC_WR_EOL | + bt->line_bytes); + RISC_INSTR(bt->buf_dma + buf_pos); + buf_pos += bt->line_bytes; + } + + RISC_INSTR(RISC_SYNC | op_sync_orin | RISC_SYNC_VRO); + RISC_INSTR(0); + + RISC_INSTR(RISC_JUMP); + RISC_INSTR(bt->risc_dma); + + btwrite((bt->line_count << 16) | bt->line_bytes, BT878_APACK_LEN); +} + +/*****************************/ +/* Start/Stop grabbing funcs */ +/*****************************/ + +void bt878_start(struct bt878 *bt, u32 controlreg, u32 op_sync_orin, + u32 irq_err_ignore) +{ + u32 int_mask; + + dprintk("bt878 debug: bt878_start (ctl=%8.8x)\n", controlreg); + /* complete the writing of the risc dma program now we have + * the card specifics + */ + bt878_risc_program(bt, op_sync_orin); + controlreg &= ~0x1f; + controlreg |= 0x1b; + + btwrite(bt->risc_dma, BT878_ARISC_START); + + /* original int mask had : + * 6 2 8 4 0 + * 1111 1111 1000 0000 0000 + * SCERR|OCERR|PABORT|RIPERR|FDSR|FTRGT|FBUS|RISCI + * Hacked for DST to: + * SCERR | OCERR | FDSR | FTRGT | FBUS | RISCI + */ + int_mask = BT878_ASCERR | BT878_AOCERR | BT878_APABORT | + BT878_ARIPERR | BT878_APPERR | BT878_AFDSR | BT878_AFTRGT | + BT878_AFBUS | BT878_ARISCI; + + + /* ignore pesky bits */ + int_mask &= ~irq_err_ignore; + + btwrite(int_mask, BT878_AINT_MASK); + btwrite(controlreg, BT878_AGPIO_DMA_CTL); +} + +void bt878_stop(struct bt878 *bt) +{ + u32 stat; + int i = 0; + + dprintk("bt878 debug: bt878_stop\n"); + + btwrite(0, BT878_AINT_MASK); + btand(~0x13, BT878_AGPIO_DMA_CTL); + + do { + stat = btread(BT878_AINT_STAT); + if (!(stat & BT878_ARISC_EN)) + break; + i++; + } while (i < 500); + + dprintk("bt878(%d) debug: bt878_stop, i=%d, stat=0x%8.8x\n", + bt->nr, i, stat); +} + +EXPORT_SYMBOL(bt878_start); +EXPORT_SYMBOL(bt878_stop); + +/*****************************/ +/* Interrupt service routine */ +/*****************************/ + +static irqreturn_t bt878_irq(int irq, void *dev_id) +{ + u32 stat, astat, mask; + int count; + struct bt878 *bt; + + bt = (struct bt878 *) dev_id; + + count = 0; + while (1) { + stat = btread(BT878_AINT_STAT); + mask = btread(BT878_AINT_MASK); + if (!(astat = (stat & mask))) + return IRQ_NONE; /* this interrupt is not for me */ +/* dprintk("bt878(%d) debug: irq count %d, stat 0x%8.8x, mask 0x%8.8x\n",bt->nr,count,stat,mask); */ + btwrite(astat, BT878_AINT_STAT); /* try to clear interrupt condition */ + + + if (astat & (BT878_ASCERR | BT878_AOCERR)) { + if (bt878_verbose) { + printk(KERN_INFO + "bt878(%d): irq%s%s risc_pc=%08x\n", + bt->nr, + (astat & BT878_ASCERR) ? " SCERR" : + "", + (astat & BT878_AOCERR) ? " OCERR" : + "", btread(BT878_ARISC_PC)); + } + } + if (astat & (BT878_APABORT | BT878_ARIPERR | BT878_APPERR)) { + if (bt878_verbose) { + printk(KERN_INFO + "bt878(%d): irq%s%s%s risc_pc=%08x\n", + bt->nr, + (astat & BT878_APABORT) ? " PABORT" : + "", + (astat & BT878_ARIPERR) ? " RIPERR" : + "", + (astat & BT878_APPERR) ? " PPERR" : + "", btread(BT878_ARISC_PC)); + } + } + if (astat & (BT878_AFDSR | BT878_AFTRGT | BT878_AFBUS)) { + if (bt878_verbose) { + printk(KERN_INFO + "bt878(%d): irq%s%s%s risc_pc=%08x\n", + bt->nr, + (astat & BT878_AFDSR) ? " FDSR" : "", + (astat & BT878_AFTRGT) ? " FTRGT" : + "", + (astat & BT878_AFBUS) ? " FBUS" : "", + btread(BT878_ARISC_PC)); + } + } + if (astat & BT878_ARISCI) { + bt->finished_block = (stat & BT878_ARISCS) >> 28; + tasklet_schedule(&bt->tasklet); + break; + } + count++; + if (count > 20) { + btwrite(0, BT878_AINT_MASK); + printk(KERN_ERR + "bt878(%d): IRQ lockup, cleared int mask\n", + bt->nr); + break; + } + } + return IRQ_HANDLED; +} + +int +bt878_device_control(struct bt878 *bt, unsigned int cmd, union dst_gpio_packet *mp) +{ + int retval; + + retval = 0; + if (mutex_lock_interruptible(&bt->gpio_lock)) + return -ERESTARTSYS; + /* special gpio signal */ + switch (cmd) { + case DST_IG_ENABLE: + // dprintk("dvb_bt8xx: dst enable mask 0x%02x enb 0x%02x \n", mp->dstg.enb.mask, mp->dstg.enb.enable); + retval = bttv_gpio_enable(bt->bttv_nr, + mp->enb.mask, + mp->enb.enable); + break; + case DST_IG_WRITE: + // dprintk("dvb_bt8xx: dst write gpio mask 0x%02x out 0x%02x\n", mp->dstg.outp.mask, mp->dstg.outp.highvals); + retval = bttv_write_gpio(bt->bttv_nr, + mp->outp.mask, + mp->outp.highvals); + + break; + case DST_IG_READ: + /* read */ + retval = bttv_read_gpio(bt->bttv_nr, &mp->rd.value); + // dprintk("dvb_bt8xx: dst read gpio 0x%02x\n", (unsigned)mp->dstg.rd.value); + break; + case DST_IG_TS: + /* Set packet size */ + bt->TS_Size = mp->psize; + break; + + default: + retval = -EINVAL; + break; + } + mutex_unlock(&bt->gpio_lock); + return retval; +} + +EXPORT_SYMBOL(bt878_device_control); + +#define BROOKTREE_878_DEVICE(vend, dev, name) \ + { \ + .vendor = PCI_VENDOR_ID_BROOKTREE, \ + .device = PCI_DEVICE_ID_BROOKTREE_878, \ + .subvendor = (vend), .subdevice = (dev), \ + .driver_data = (unsigned long) name \ + } + +static struct pci_device_id bt878_pci_tbl[] __devinitdata = { + BROOKTREE_878_DEVICE(0x0071, 0x0101, "Nebula Electronics DigiTV"), + BROOKTREE_878_DEVICE(0x1461, 0x0761, "AverMedia AverTV DVB-T 761"), + BROOKTREE_878_DEVICE(0x11bd, 0x001c, "Pinnacle PCTV Sat"), + BROOKTREE_878_DEVICE(0x11bd, 0x0026, "Pinnacle PCTV SAT CI"), + BROOKTREE_878_DEVICE(0x1822, 0x0001, "Twinhan VisionPlus DVB"), + BROOKTREE_878_DEVICE(0x270f, 0xfc00, + "ChainTech digitop DST-1000 DVB-S"), + BROOKTREE_878_DEVICE(0x1461, 0x0771, "AVermedia AverTV DVB-T 771"), + BROOKTREE_878_DEVICE(0x18ac, 0xdb10, "DViCO FusionHDTV DVB-T Lite"), + BROOKTREE_878_DEVICE(0x18ac, 0xdb11, "Ultraview DVB-T Lite"), + BROOKTREE_878_DEVICE(0x18ac, 0xd500, "DViCO FusionHDTV 5 Lite"), + BROOKTREE_878_DEVICE(0x7063, 0x2000, "pcHDTV HD-2000 TV"), + BROOKTREE_878_DEVICE(0x1822, 0x0026, "DNTV Live! Mini"), + { } +}; + +MODULE_DEVICE_TABLE(pci, bt878_pci_tbl); + +static const char * __devinit card_name(const struct pci_device_id *id) +{ + return id->driver_data ? (const char *)id->driver_data : "Unknown"; +} + +/***********************/ +/* PCI device handling */ +/***********************/ + +static int __devinit bt878_probe(struct pci_dev *dev, + const struct pci_device_id *pci_id) +{ + int result = 0; + unsigned char lat; + struct bt878 *bt; +#if defined(__powerpc__) + unsigned int cmd; +#endif + unsigned int cardid; + + printk(KERN_INFO "bt878: Bt878 AUDIO function found (%d).\n", + bt878_num); + if (bt878_num >= BT878_MAX) { + printk(KERN_ERR "bt878: Too many devices inserted\n"); + result = -ENOMEM; + goto fail0; + } + if (pci_enable_device(dev)) + return -EIO; + + cardid = dev->subsystem_device << 16; + cardid |= dev->subsystem_vendor; + + printk(KERN_INFO "%s: card id=[0x%x],[ %s ] has DVB functions.\n", + __func__, cardid, card_name(pci_id)); + + bt = &bt878[bt878_num]; + bt->dev = dev; + bt->nr = bt878_num; + bt->shutdown = 0; + + bt->id = dev->device; + bt->irq = dev->irq; + bt->bt878_adr = pci_resource_start(dev, 0); + if (!request_mem_region(pci_resource_start(dev, 0), + pci_resource_len(dev, 0), "bt878")) { + result = -EBUSY; + goto fail0; + } + + bt->revision = dev->revision; + pci_read_config_byte(dev, PCI_LATENCY_TIMER, &lat); + + + printk(KERN_INFO "bt878(%d): Bt%x (rev %d) at %02x:%02x.%x, ", + bt878_num, bt->id, bt->revision, dev->bus->number, + PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn)); + printk("irq: %d, latency: %d, memory: 0x%lx\n", + bt->irq, lat, bt->bt878_adr); + + +#if defined(__powerpc__) + /* on OpenFirmware machines (PowerMac at least), PCI memory cycle */ + /* response on cards with no firmware is not enabled by OF */ + pci_read_config_dword(dev, PCI_COMMAND, &cmd); + cmd = (cmd | PCI_COMMAND_MEMORY); + pci_write_config_dword(dev, PCI_COMMAND, cmd); +#endif + +#ifdef __sparc__ + bt->bt878_mem = (unsigned char *) bt->bt878_adr; +#else + bt->bt878_mem = ioremap(bt->bt878_adr, 0x1000); +#endif + + /* clear interrupt mask */ + btwrite(0, BT848_INT_MASK); + + result = request_irq(bt->irq, bt878_irq, + IRQF_SHARED | IRQF_DISABLED, "bt878", + (void *) bt); + if (result == -EINVAL) { + printk(KERN_ERR "bt878(%d): Bad irq number or handler\n", + bt878_num); + goto fail1; + } + if (result == -EBUSY) { + printk(KERN_ERR + "bt878(%d): IRQ %d busy, change your PnP config in BIOS\n", + bt878_num, bt->irq); + goto fail1; + } + if (result < 0) + goto fail1; + + pci_set_master(dev); + pci_set_drvdata(dev, bt); + + if ((result = bt878_mem_alloc(bt))) { + printk(KERN_ERR "bt878: failed to allocate memory!\n"); + goto fail2; + } + + bt878_make_risc(bt); + btwrite(0, BT878_AINT_MASK); + bt878_num++; + + return 0; + + fail2: + free_irq(bt->irq, bt); + fail1: + release_mem_region(pci_resource_start(bt->dev, 0), + pci_resource_len(bt->dev, 0)); + fail0: + pci_disable_device(dev); + return result; +} + +static void __devexit bt878_remove(struct pci_dev *pci_dev) +{ + u8 command; + struct bt878 *bt = pci_get_drvdata(pci_dev); + + if (bt878_verbose) + printk(KERN_INFO "bt878(%d): unloading\n", bt->nr); + + /* turn off all capturing, DMA and IRQs */ + btand(~0x13, BT878_AGPIO_DMA_CTL); + + /* first disable interrupts before unmapping the memory! */ + btwrite(0, BT878_AINT_MASK); + btwrite(~0U, BT878_AINT_STAT); + + /* disable PCI bus-mastering */ + pci_read_config_byte(bt->dev, PCI_COMMAND, &command); + /* Should this be &=~ ?? */ + command &= ~PCI_COMMAND_MASTER; + pci_write_config_byte(bt->dev, PCI_COMMAND, command); + + free_irq(bt->irq, bt); + printk(KERN_DEBUG "bt878_mem: 0x%p.\n", bt->bt878_mem); + if (bt->bt878_mem) + iounmap(bt->bt878_mem); + + release_mem_region(pci_resource_start(bt->dev, 0), + pci_resource_len(bt->dev, 0)); + /* wake up any waiting processes + because shutdown flag is set, no new processes (in this queue) + are expected + */ + bt->shutdown = 1; + bt878_mem_free(bt); + + pci_set_drvdata(pci_dev, NULL); + pci_disable_device(pci_dev); + return; +} + +static struct pci_driver bt878_pci_driver = { + .name = "bt878", + .id_table = bt878_pci_tbl, + .probe = bt878_probe, + .remove = __devexit_p(bt878_remove), +}; + +/*******************************/ +/* Module management functions */ +/*******************************/ + +static int __init bt878_init_module(void) +{ + bt878_num = 0; + + printk(KERN_INFO "bt878: AUDIO driver version %d.%d.%d loaded\n", + (BT878_VERSION_CODE >> 16) & 0xff, + (BT878_VERSION_CODE >> 8) & 0xff, + BT878_VERSION_CODE & 0xff); + + return pci_register_driver(&bt878_pci_driver); +} + +static void __exit bt878_cleanup_module(void) +{ + pci_unregister_driver(&bt878_pci_driver); +} + +module_init(bt878_init_module); +module_exit(bt878_cleanup_module); + +MODULE_LICENSE("GPL"); + +/* + * Local variables: + * c-basic-offset: 8 + * End: + */ |