1 files changed, 124 insertions, 0 deletions
diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig
new file mode 100644
index 00000000..2ca6a5a4
--- /dev/null
+++ b/drivers/hwmon/pmbus/Kconfig
@@ -0,0 +1,124 @@
+#
+# PMBus chip drivers configuration
+#
+
+menuconfig PMBUS
+	tristate "PMBus support"
+	depends on I2C && EXPERIMENTAL
+	default n
+	help
+	  Say yes here if you want to enable PMBus support.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called pmbus_core.
+
+if PMBUS
+
+config SENSORS_PMBUS
+	tristate "Generic PMBus devices"
+	default y
+	help
+	  If you say yes here you get hardware monitoring support for generic
+	  PMBus devices, including but not limited to ADP4000, BMR453, BMR454,
+	  MDT040, NCP4200, NCP4208, PDT003, PDT006, PDT012, UDT020, TPS40400,
+	  and TPS40422.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called pmbus.
+
+config SENSORS_ADM1275
+	tristate "Analog Devices ADM1275 and compatibles"
+	default n
+	help
+	  If you say yes here you get hardware monitoring support for Analog
+	  Devices ADM1075, ADM1275, and ADM1276 Hot-Swap Controller and Digital
+	  Power Monitors.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called adm1275.
+
+config SENSORS_LM25066
+	tristate "National Semiconductor LM25066 and compatibles"
+	default n
+	help
+	  If you say yes here you get hardware monitoring support for National
+	  Semiconductor LM25066, LM5064, and LM5066.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called lm25066.
+
+config SENSORS_LTC2978
+	tristate "Linear Technologies LTC2978 and LTC3880"
+	default n
+	help
+	  If you say yes here you get hardware monitoring support for Linear
+	  Technology LTC2978 and LTC3880.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called ltc2978.
+
+config SENSORS_MAX16064
+	tristate "Maxim MAX16064"
+	default n
+	help
+	  If you say yes here you get hardware monitoring support for Maxim
+	  MAX16064.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called max16064.
+
+config SENSORS_MAX34440
+	tristate "Maxim MAX34440 and compatibles"
+	default n
+	help
+	  If you say yes here you get hardware monitoring support for Maxim
+	  MAX34440, MAX34441, and MAX34446.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called max34440.
+
+config SENSORS_MAX8688
+	tristate "Maxim MAX8688"
+	default n
+	help
+	  If you say yes here you get hardware monitoring support for Maxim
+	  MAX8688.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called max8688.
+
+config SENSORS_UCD9000
+	tristate "TI UCD90120, UCD90124, UCD9090, UCD90910"
+	default n
+	help
+	  If you say yes here you get hardware monitoring support for TI
+	  UCD90120, UCD90124, UCD9090, UCD90910 Sequencer and System Health
+	  Controllers.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called ucd9000.
+
+config SENSORS_UCD9200
+	tristate "TI UCD9220, UCD9222, UCD9224, UCD9240, UCD9244, UCD9246, UCD9248"
+	default n
+	help
+	  If you say yes here you get hardware monitoring support for TI
+	  UCD9220, UCD9222, UCD9224, UCD9240, UCD9244, UCD9246, and UCD9248
+	  Digital PWM System Controllers.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called ucd9200.
+
+config SENSORS_ZL6100
+	tristate "Intersil ZL6100 and compatibles"
+	default n
+	help
+	  If you say yes here you get hardware monitoring support for Intersil
+	  ZL2004, ZL2005, ZL2006, ZL2008, ZL2105, ZL2106, ZL6100, ZL6105,
+	  ZL9101M, and ZL9117M Digital DC/DC Controllers, as well as for
+	  Ericsson BMR450, BMR451, BMR462, BMR463, and BMR464.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called zl6100.
+
+endif # PMBUS