19 files changed, 8010 insertions, 0 deletions

diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig
new file mode 100644
index 00000000..9b00072a
--- /dev/null
+++ b/drivers/firmware/Kconfig
@@ -0,0 +1,150 @@
+#
+# For a description of the syntax of this configuration file,
+# see Documentation/kbuild/kconfig-language.txt.
+#
+
+menu "Firmware Drivers"
+
+config EDD
+	tristate "BIOS Enhanced Disk Drive calls determine boot disk"
+	depends on X86
+	help
+	  Say Y or M here if you want to enable BIOS Enhanced Disk Drive
+	  Services real mode BIOS calls to determine which disk
+	  BIOS tries boot from.  This information is then exported via sysfs.
+
+	  This option is experimental and is known to fail to boot on some
+          obscure configurations. Most disk controller BIOS vendors do
+          not yet implement this feature.
+
+config EDD_OFF
+	bool "Sets default behavior for EDD detection to off"
+	depends on EDD
+	default n
+	help
+	  Say Y if you want EDD disabled by default, even though it is compiled into the
+	  kernel. Say N if you want EDD enabled by default. EDD can be dynamically set
+	  using the kernel parameter 'edd={on|skipmbr|off}'.
+
+config FIRMWARE_MEMMAP
+    bool "Add firmware-provided memory map to sysfs" if EXPERT
+    default X86
+    help
+      Add the firmware-provided (unmodified) memory map to /sys/firmware/memmap.
+      That memory map is used for example by kexec to set up parameter area
+      for the next kernel, but can also be used for debugging purposes.
+
+      See also Documentation/ABI/testing/sysfs-firmware-memmap.
+
+config EFI_VARS
+	tristate "EFI Variable Support via sysfs"
+	depends on EFI
+	default n
+	help
+	  If you say Y here, you are able to get EFI (Extensible Firmware
+	  Interface) variable information via sysfs.  You may read,
+	  write, create, and destroy EFI variables through this interface.
+
+	  Note that using this driver in concert with efibootmgr requires
+	  at least test release version 0.5.0-test3 or later, which is
+	  available from Matt Domsch's website located at:
+	  <http://linux.dell.com/efibootmgr/testing/efibootmgr-0.5.0-test3.tar.gz>
+
+	  Subsequent efibootmgr releases may be found at:
+	  <http://linux.dell.com/efibootmgr>
+
+config EFI_PCDP
+	bool "Console device selection via EFI PCDP or HCDP table"
+	depends on ACPI && EFI && IA64
+	default y if IA64
+	help
+	  If your firmware supplies the PCDP table, and you want to
+	  automatically use the primary console device it describes
+	  as the Linux console, say Y here.
+
+	  If your firmware supplies the HCDP table, and you want to
+	  use the first serial port it describes as the Linux console,
+	  say Y here.  If your EFI ConOut path contains only a UART
+	  device, it will become the console automatically.  Otherwise,
+	  you must specify the "console=hcdp" kernel boot argument.
+
+	  Neither the PCDP nor the HCDP affects naming of serial devices,
+	  so a serial console may be /dev/ttyS0, /dev/ttyS1, etc, depending
+	  on how the driver discovers devices.
+
+	  You must also enable the appropriate drivers (serial, VGA, etc.)
+
+	  See DIG64_HCDPv20_042804.pdf available from
+	  <http://www.dig64.org/specifications/> 
+
+config DELL_RBU
+	tristate "BIOS update support for DELL systems via sysfs"
+	depends on X86
+	select FW_LOADER
+	help
+	 Say m if you want to have the option of updating the BIOS for your
+	 DELL system. Note you need a Dell OpenManage or Dell Update package (DUP)
+	 supporting application to communicate with the BIOS regarding the new
+	 image for the image update to take effect.
+	 See <file:Documentation/dell_rbu.txt> for more details on the driver.
+
+config DCDBAS
+	tristate "Dell Systems Management Base Driver"
+	depends on X86
+	help
+	  The Dell Systems Management Base Driver provides a sysfs interface
+	  for systems management software to perform System Management
+	  Interrupts (SMIs) and Host Control Actions (system power cycle or
+	  power off after OS shutdown) on certain Dell systems.
+
+	  See <file:Documentation/dcdbas.txt> for more details on the driver
+	  and the Dell systems on which Dell systems management software makes
+	  use of this driver.
+
+	  Say Y or M here to enable the driver for use by Dell systems
+	  management software such as Dell OpenManage.
+
+config DMIID
+    bool "Export DMI identification via sysfs to userspace"
+    depends on DMI
+    default y
+	help
+	  Say Y here if you want to query SMBIOS/DMI system identification
+	  information from userspace through /sys/class/dmi/id/ or if you want
+	  DMI-based module auto-loading.
+
+config DMI_SYSFS
+	tristate "DMI table support in sysfs"
+	depends on SYSFS && DMI
+	default n
+	help
+	  Say Y or M here to enable the exporting of the raw DMI table
+	  data via sysfs.  This is useful for consuming the data without
+	  requiring any access to /dev/mem at all.  Tables are found
+	  under /sys/firmware/dmi when this option is enabled and
+	  loaded.
+
+config ISCSI_IBFT_FIND
+	bool "iSCSI Boot Firmware Table Attributes"
+	depends on X86
+	default n
+	help
+	  This option enables the kernel to find the region of memory
+	  in which the ISCSI Boot Firmware Table (iBFT) resides. This
+	  is necessary for iSCSI Boot Firmware Table Attributes module to work
+	  properly.
+
+config ISCSI_IBFT
+	tristate "iSCSI Boot Firmware Table Attributes module"
+	select ISCSI_BOOT_SYSFS
+	depends on ISCSI_IBFT_FIND && SCSI && SCSI_LOWLEVEL
+	default	n
+	help
+	  This option enables support for detection and exposing of iSCSI
+	  Boot Firmware Table (iBFT) via sysfs to userspace. If you wish to
+	  detect iSCSI boot parameters dynamically during system boot, say Y.
+	  Otherwise, say N.
+
+source "drivers/firmware/google/Kconfig"
+
+endmenu
diff --git a/drivers/firmware/Makefile b/drivers/firmware/Makefile
new file mode 100644
index 00000000..5a7e2739
--- /dev/null
+++ b/drivers/firmware/Makefile
@@ -0,0 +1,16 @@
+#
+# Makefile for the linux kernel.
+#
+obj-$(CONFIG_DMI)		+= dmi_scan.o
+obj-$(CONFIG_DMI_SYSFS)		+= dmi-sysfs.o
+obj-$(CONFIG_EDD)		+= edd.o
+obj-$(CONFIG_EFI_VARS)		+= efivars.o
+obj-$(CONFIG_EFI_PCDP)		+= pcdp.o
+obj-$(CONFIG_DELL_RBU)          += dell_rbu.o
+obj-$(CONFIG_DCDBAS)		+= dcdbas.o
+obj-$(CONFIG_DMIID)		+= dmi-id.o
+obj-$(CONFIG_ISCSI_IBFT_FIND)	+= iscsi_ibft_find.o
+obj-$(CONFIG_ISCSI_IBFT)	+= iscsi_ibft.o
+obj-$(CONFIG_FIRMWARE_MEMMAP)	+= memmap.o
+
+obj-$(CONFIG_GOOGLE_FIRMWARE)	+= google/
diff --git a/drivers/firmware/dcdbas.c b/drivers/firmware/dcdbas.c
new file mode 100644
index 00000000..ea5ac2dc
--- /dev/null
+++ b/drivers/firmware/dcdbas.c
@@ -0,0 +1,659 @@
+/*
+ *  dcdbas.c: Dell Systems Management Base Driver
+ *
+ *  The Dell Systems Management Base Driver provides a sysfs interface for
+ *  systems management software to perform System Management Interrupts (SMIs)
+ *  and Host Control Actions (power cycle or power off after OS shutdown) on
+ *  Dell systems.
+ *
+ *  See Documentation/dcdbas.txt for more information.
+ *
+ *  Copyright (C) 1995-2006 Dell Inc.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License v2.0 as published by
+ *  the Free Software Foundation.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/errno.h>
+#include <linux/gfp.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/mc146818rtc.h>
+#include <linux/module.h>
+#include <linux/reboot.h>
+#include <linux/sched.h>
+#include <linux/smp.h>
+#include <linux/spinlock.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/mutex.h>
+#include <asm/io.h>
+
+#include "dcdbas.h"
+
+#define DRIVER_NAME		"dcdbas"
+#define DRIVER_VERSION		"5.6.0-3.2"
+#define DRIVER_DESCRIPTION	"Dell Systems Management Base Driver"
+
+static struct platform_device *dcdbas_pdev;
+
+static u8 *smi_data_buf;
+static dma_addr_t smi_data_buf_handle;
+static unsigned long smi_data_buf_size;
+static u32 smi_data_buf_phys_addr;
+static DEFINE_MUTEX(smi_data_lock);
+
+static unsigned int host_control_action;
+static unsigned int host_control_smi_type;
+static unsigned int host_control_on_shutdown;
+
+/**
+ * smi_data_buf_free: free SMI data buffer
+ */
+static void smi_data_buf_free(void)
+{
+	if (!smi_data_buf)
+		return;
+
+	dev_dbg(&dcdbas_pdev->dev, "%s: phys: %x size: %lu\n",
+		__func__, smi_data_buf_phys_addr, smi_data_buf_size);
+
+	dma_free_coherent(&dcdbas_pdev->dev, smi_data_buf_size, smi_data_buf,
+			  smi_data_buf_handle);
+	smi_data_buf = NULL;
+	smi_data_buf_handle = 0;
+	smi_data_buf_phys_addr = 0;
+	smi_data_buf_size = 0;
+}
+
+/**
+ * smi_data_buf_realloc: grow SMI data buffer if needed
+ */
+static int smi_data_buf_realloc(unsigned long size)
+{
+	void *buf;
+	dma_addr_t handle;
+
+	if (smi_data_buf_size >= size)
+		return 0;
+
+	if (size > MAX_SMI_DATA_BUF_SIZE)
+		return -EINVAL;
+
+	/* new buffer is needed */
+	buf = dma_alloc_coherent(&dcdbas_pdev->dev, size, &handle, GFP_KERNEL);
+	if (!buf) {
+		dev_dbg(&dcdbas_pdev->dev,
+			"%s: failed to allocate memory size %lu\n",
+			__func__, size);
+		return -ENOMEM;
+	}
+	/* memory zeroed by dma_alloc_coherent */
+
+	if (smi_data_buf)
+		memcpy(buf, smi_data_buf, smi_data_buf_size);
+
+	/* free any existing buffer */
+	smi_data_buf_free();
+
+	/* set up new buffer for use */
+	smi_data_buf = buf;
+	smi_data_buf_handle = handle;
+	smi_data_buf_phys_addr = (u32) virt_to_phys(buf);
+	smi_data_buf_size = size;
+
+	dev_dbg(&dcdbas_pdev->dev, "%s: phys: %x size: %lu\n",
+		__func__, smi_data_buf_phys_addr, smi_data_buf_size);
+
+	return 0;
+}
+
+static ssize_t smi_data_buf_phys_addr_show(struct device *dev,
+					   struct device_attribute *attr,
+					   char *buf)
+{
+	return sprintf(buf, "%x\n", smi_data_buf_phys_addr);
+}
+
+static ssize_t smi_data_buf_size_show(struct device *dev,
+				      struct device_attribute *attr,
+				      char *buf)
+{
+	return sprintf(buf, "%lu\n", smi_data_buf_size);
+}
+
+static ssize_t smi_data_buf_size_store(struct device *dev,
+				       struct device_attribute *attr,
+				       const char *buf, size_t count)
+{
+	unsigned long buf_size;
+	ssize_t ret;
+
+	buf_size = simple_strtoul(buf, NULL, 10);
+
+	/* make sure SMI data buffer is at least buf_size */
+	mutex_lock(&smi_data_lock);
+	ret = smi_data_buf_realloc(buf_size);
+	mutex_unlock(&smi_data_lock);
+	if (ret)
+		return ret;
+
+	return count;
+}
+
+static ssize_t smi_data_read(struct file *filp, struct kobject *kobj,
+			     struct bin_attribute *bin_attr,
+			     char *buf, loff_t pos, size_t count)
+{
+	ssize_t ret;
+
+	mutex_lock(&smi_data_lock);
+	ret = memory_read_from_buffer(buf, count, &pos, smi_data_buf,
+					smi_data_buf_size);
+	mutex_unlock(&smi_data_lock);
+	return ret;
+}
+
+static ssize_t smi_data_write(struct file *filp, struct kobject *kobj,
+			      struct bin_attribute *bin_attr,
+			      char *buf, loff_t pos, size_t count)
+{
+	ssize_t ret;
+
+	if ((pos + count) > MAX_SMI_DATA_BUF_SIZE)
+		return -EINVAL;
+
+	mutex_lock(&smi_data_lock);
+
+	ret = smi_data_buf_realloc(pos + count);
+	if (ret)
+		goto out;
+
+	memcpy(smi_data_buf + pos, buf, count);
+	ret = count;
+out:
+	mutex_unlock(&smi_data_lock);
+	return ret;
+}
+
+static ssize_t host_control_action_show(struct device *dev,
+					struct device_attribute *attr,
+					char *buf)
+{
+	return sprintf(buf, "%u\n", host_control_action);
+}
+
+static ssize_t host_control_action_store(struct device *dev,
+					 struct device_attribute *attr,
+					 const char *buf, size_t count)
+{
+	ssize_t ret;
+
+	/* make sure buffer is available for host control command */
+	mutex_lock(&smi_data_lock);
+	ret = smi_data_buf_realloc(sizeof(struct apm_cmd));
+	mutex_unlock(&smi_data_lock);
+	if (ret)
+		return ret;
+
+	host_control_action = simple_strtoul(buf, NULL, 10);
+	return count;
+}
+
+static ssize_t host_control_smi_type_show(struct device *dev,
+					  struct device_attribute *attr,
+					  char *buf)
+{
+	return sprintf(buf, "%u\n", host_control_smi_type);
+}
+
+static ssize_t host_control_smi_type_store(struct device *dev,
+					   struct device_attribute *attr,
+					   const char *buf, size_t count)
+{
+	host_control_smi_type = simple_strtoul(buf, NULL, 10);
+	return count;
+}
+
+static ssize_t host_control_on_shutdown_show(struct device *dev,
+					     struct device_attribute *attr,
+					     char *buf)
+{
+	return sprintf(buf, "%u\n", host_control_on_shutdown);
+}
+
+static ssize_t host_control_on_shutdown_store(struct device *dev,
+					      struct device_attribute *attr,
+					      const char *buf, size_t count)
+{
+	host_control_on_shutdown = simple_strtoul(buf, NULL, 10);
+	return count;
+}
+
+/**
+ * dcdbas_smi_request: generate SMI request
+ *
+ * Called with smi_data_lock.
+ */
+int dcdbas_smi_request(struct smi_cmd *smi_cmd)
+{
+	cpumask_var_t old_mask;
+	int ret = 0;
+
+	if (smi_cmd->magic != SMI_CMD_MAGIC) {
+		dev_info(&dcdbas_pdev->dev, "%s: invalid magic value\n",
+			 __func__);
+		return -EBADR;
+	}
+
+	/* SMI requires CPU 0 */
+	if (!alloc_cpumask_var(&old_mask, GFP_KERNEL))
+		return -ENOMEM;
+
+	cpumask_copy(old_mask, &current->cpus_allowed);
+	set_cpus_allowed_ptr(current, cpumask_of(0));
+	if (smp_processor_id() != 0) {
+		dev_dbg(&dcdbas_pdev->dev, "%s: failed to get CPU 0\n",
+			__func__);
+		ret = -EBUSY;
+		goto out;
+	}
+
+	/* generate SMI */
+	/* inb to force posted write through and make SMI happen now */
+	asm volatile (
+		"outb %b0,%w1\n"
+		"inb %w1"
+		: /* no output args */
+		: "a" (smi_cmd->command_code),
+		  "d" (smi_cmd->command_address),
+		  "b" (smi_cmd->ebx),
+		  "c" (smi_cmd->ecx)
+		: "memory"
+	);
+
+out:
+	set_cpus_allowed_ptr(current, old_mask);
+	free_cpumask_var(old_mask);
+	return ret;
+}
+
+/**
+ * smi_request_store:
+ *
+ * The valid values are:
+ * 0: zero SMI data buffer
+ * 1: generate calling interface SMI
+ * 2: generate raw SMI
+ *
+ * User application writes smi_cmd to smi_data before telling driver
+ * to generate SMI.
+ */
+static ssize_t smi_request_store(struct device *dev,
+				 struct device_attribute *attr,
+				 const char *buf, size_t count)
+{
+	struct smi_cmd *smi_cmd;
+	unsigned long val = simple_strtoul(buf, NULL, 10);
+	ssize_t ret;
+
+	mutex_lock(&smi_data_lock);
+
+	if (smi_data_buf_size < sizeof(struct smi_cmd)) {
+		ret = -ENODEV;
+		goto out;
+	}
+	smi_cmd = (struct smi_cmd *)smi_data_buf;
+
+	switch (val) {
+	case 2:
+		/* Raw SMI */
+		ret = dcdbas_smi_request(smi_cmd);
+		if (!ret)
+			ret = count;
+		break;
+	case 1:
+		/* Calling Interface SMI */
+		smi_cmd->ebx = (u32) virt_to_phys(smi_cmd->command_buffer);
+		ret = dcdbas_smi_request(smi_cmd);
+		if (!ret)
+			ret = count;
+		break;
+	case 0:
+		memset(smi_data_buf, 0, smi_data_buf_size);
+		ret = count;
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+
+out:
+	mutex_unlock(&smi_data_lock);
+	return ret;
+}
+EXPORT_SYMBOL(dcdbas_smi_request);
+
+/**
+ * host_control_smi: generate host control SMI
+ *
+ * Caller must set up the host control command in smi_data_buf.
+ */
+static int host_control_smi(void)
+{
+	struct apm_cmd *apm_cmd;
+	u8 *data;
+	unsigned long flags;
+	u32 num_ticks;
+	s8 cmd_status;
+	u8 index;
+
+	apm_cmd = (struct apm_cmd *)smi_data_buf;
+	apm_cmd->status = ESM_STATUS_CMD_UNSUCCESSFUL;
+
+	switch (host_control_smi_type) {
+	case HC_SMITYPE_TYPE1:
+		spin_lock_irqsave(&rtc_lock, flags);
+		/* write SMI data buffer physical address */
+		data = (u8 *)&smi_data_buf_phys_addr;
+		for (index = PE1300_CMOS_CMD_STRUCT_PTR;
+		     index < (PE1300_CMOS_CMD_STRUCT_PTR + 4);
+		     index++, data++) {
+			outb(index,
+			     (CMOS_BASE_PORT + CMOS_PAGE2_INDEX_PORT_PIIX4));
+			outb(*data,
+			     (CMOS_BASE_PORT + CMOS_PAGE2_DATA_PORT_PIIX4));
+		}
+
+		/* first set status to -1 as called by spec */
+		cmd_status = ESM_STATUS_CMD_UNSUCCESSFUL;
+		outb((u8) cmd_status, PCAT_APM_STATUS_PORT);
+
+		/* generate SMM call */
+		outb(ESM_APM_CMD, PCAT_APM_CONTROL_PORT);
+		spin_unlock_irqrestore(&rtc_lock, flags);
+
+		/* wait a few to see if it executed */
+		num_ticks = TIMEOUT_USEC_SHORT_SEMA_BLOCKING;
+		while ((cmd_status = inb(PCAT_APM_STATUS_PORT))
+		       == ESM_STATUS_CMD_UNSUCCESSFUL) {
+			num_ticks--;
+			if (num_ticks == EXPIRED_TIMER)
+				return -ETIME;
+		}
+		break;
+
+	case HC_SMITYPE_TYPE2:
+	case HC_SMITYPE_TYPE3:
+		spin_lock_irqsave(&rtc_lock, flags);
+		/* write SMI data buffer physical address */
+		data = (u8 *)&smi_data_buf_phys_addr;
+		for (index = PE1400_CMOS_CMD_STRUCT_PTR;
+		     index < (PE1400_CMOS_CMD_STRUCT_PTR + 4);
+		     index++, data++) {
+			outb(index, (CMOS_BASE_PORT + CMOS_PAGE1_INDEX_PORT));
+			outb(*data, (CMOS_BASE_PORT + CMOS_PAGE1_DATA_PORT));
+		}
+
+		/* generate SMM call */
+		if (host_control_smi_type == HC_SMITYPE_TYPE3)
+			outb(ESM_APM_CMD, PCAT_APM_CONTROL_PORT);
+		else
+			outb(ESM_APM_CMD, PE1400_APM_CONTROL_PORT);
+
+		/* restore RTC index pointer since it was written to above */
+		CMOS_READ(RTC_REG_C);
+		spin_unlock_irqrestore(&rtc_lock, flags);
+
+		/* read control port back to serialize write */
+		cmd_status = inb(PE1400_APM_CONTROL_PORT);
+
+		/* wait a few to see if it executed */
+		num_ticks = TIMEOUT_USEC_SHORT_SEMA_BLOCKING;
+		while (apm_cmd->status == ESM_STATUS_CMD_UNSUCCESSFUL) {
+			num_ticks--;
+			if (num_ticks == EXPIRED_TIMER)
+				return -ETIME;
+		}
+		break;
+
+	default:
+		dev_dbg(&dcdbas_pdev->dev, "%s: invalid SMI type %u\n",
+			__func__, host_control_smi_type);
+		return -ENOSYS;
+	}
+
+	return 0;
+}
+
+/**
+ * dcdbas_host_control: initiate host control
+ *
+ * This function is called by the driver after the system has
+ * finished shutting down if the user application specified a
+ * host control action to perform on shutdown.  It is safe to
+ * use smi_data_buf at this point because the system has finished
+ * shutting down and no userspace apps are running.
+ */
+static void dcdbas_host_control(void)
+{
+	struct apm_cmd *apm_cmd;
+	u8 action;
+
+	if (host_control_action == HC_ACTION_NONE)
+		return;
+
+	action = host_control_action;
+	host_control_action = HC_ACTION_NONE;
+
+	if (!smi_data_buf) {
+		dev_dbg(&dcdbas_pdev->dev, "%s: no SMI buffer\n", __func__);
+		return;
+	}
+
+	if (smi_data_buf_size < sizeof(struct apm_cmd)) {
+		dev_dbg(&dcdbas_pdev->dev, "%s: SMI buffer too small\n",
+			__func__);
+		return;
+	}
+
+	apm_cmd = (struct apm_cmd *)smi_data_buf;
+
+	/* power off takes precedence */
+	if (action & HC_ACTION_HOST_CONTROL_POWEROFF) {
+		apm_cmd->command = ESM_APM_POWER_CYCLE;
+		apm_cmd->reserved = 0;
+		*((s16 *)&apm_cmd->parameters.shortreq.parm[0]) = (s16) 0;
+		host_control_smi();
+	} else if (action & HC_ACTION_HOST_CONTROL_POWERCYCLE) {
+		apm_cmd->command = ESM_APM_POWER_CYCLE;
+		apm_cmd->reserved = 0;
+		*((s16 *)&apm_cmd->parameters.shortreq.parm[0]) = (s16) 20;
+		host_control_smi();
+	}
+}
+
+/**
+ * dcdbas_reboot_notify: handle reboot notification for host control
+ */
+static int dcdbas_reboot_notify(struct notifier_block *nb, unsigned long code,
+				void *unused)
+{
+	switch (code) {
+	case SYS_DOWN:
+	case SYS_HALT:
+	case SYS_POWER_OFF:
+		if (host_control_on_shutdown) {
+			/* firmware is going to perform host control action */
+			printk(KERN_WARNING "Please wait for shutdown "
+			       "action to complete...\n");
+			dcdbas_host_control();
+		}
+		break;
+	}
+
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block dcdbas_reboot_nb = {
+	.notifier_call = dcdbas_reboot_notify,
+	.next = NULL,
+	.priority = INT_MIN
+};
+
+static DCDBAS_BIN_ATTR_RW(smi_data);
+
+static struct bin_attribute *dcdbas_bin_attrs[] = {
+	&bin_attr_smi_data,
+	NULL
+};
+
+static DCDBAS_DEV_ATTR_RW(smi_data_buf_size);
+static DCDBAS_DEV_ATTR_RO(smi_data_buf_phys_addr);
+static DCDBAS_DEV_ATTR_WO(smi_request);
+static DCDBAS_DEV_ATTR_RW(host_control_action);
+static DCDBAS_DEV_ATTR_RW(host_control_smi_type);
+static DCDBAS_DEV_ATTR_RW(host_control_on_shutdown);
+
+static struct attribute *dcdbas_dev_attrs[] = {
+	&dev_attr_smi_data_buf_size.attr,
+	&dev_attr_smi_data_buf_phys_addr.attr,
+	&dev_attr_smi_request.attr,
+	&dev_attr_host_control_action.attr,
+	&dev_attr_host_control_smi_type.attr,
+	&dev_attr_host_control_on_shutdown.attr,
+	NULL
+};
+
+static struct attribute_group dcdbas_attr_group = {
+	.attrs = dcdbas_dev_attrs,
+};
+
+static int __devinit dcdbas_probe(struct platform_device *dev)
+{
+	int i, error;
+
+	host_control_action = HC_ACTION_NONE;
+	host_control_smi_type = HC_SMITYPE_NONE;
+
+	/*
+	 * BIOS SMI calls require buffer addresses be in 32-bit address space.
+	 * This is done by setting the DMA mask below.
+	 */
+	dcdbas_pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
+	dcdbas_pdev->dev.dma_mask = &dcdbas_pdev->dev.coherent_dma_mask;
+
+	error = sysfs_create_group(&dev->dev.kobj, &dcdbas_attr_group);
+	if (error)
+		return error;
+
+	for (i = 0; dcdbas_bin_attrs[i]; i++) {
+		error = sysfs_create_bin_file(&dev->dev.kobj,
+					      dcdbas_bin_attrs[i]);
+		if (error) {
+			while (--i >= 0)
+				sysfs_remove_bin_file(&dev->dev.kobj,
+						      dcdbas_bin_attrs[i]);
+			sysfs_remove_group(&dev->dev.kobj, &dcdbas_attr_group);
+			return error;
+		}
+	}
+
+	register_reboot_notifier(&dcdbas_reboot_nb);
+
+	dev_info(&dev->dev, "%s (version %s)\n",
+		 DRIVER_DESCRIPTION, DRIVER_VERSION);
+
+	return 0;
+}
+
+static int __devexit dcdbas_remove(struct platform_device *dev)
+{
+	int i;
+
+	unregister_reboot_notifier(&dcdbas_reboot_nb);
+	for (i = 0; dcdbas_bin_attrs[i]; i++)
+		sysfs_remove_bin_file(&dev->dev.kobj, dcdbas_bin_attrs[i]);
+	sysfs_remove_group(&dev->dev.kobj, &dcdbas_attr_group);
+
+	return 0;
+}
+
+static struct platform_driver dcdbas_driver = {
+	.driver		= {
+		.name	= DRIVER_NAME,
+		.owner	= THIS_MODULE,
+	},
+	.probe		= dcdbas_probe,
+	.remove		= __devexit_p(dcdbas_remove),
+};
+
+/**
+ * dcdbas_init: initialize driver
+ */
+static int __init dcdbas_init(void)
+{
+	int error;
+
+	error = platform_driver_register(&dcdbas_driver);
+	if (error)
+		return error;
+
+	dcdbas_pdev = platform_device_alloc(DRIVER_NAME, -1);
+	if (!dcdbas_pdev) {
+		error = -ENOMEM;
+		goto err_unregister_driver;
+	}
+
+	error = platform_device_add(dcdbas_pdev);
+	if (error)
+		goto err_free_device;
+
+	return 0;
+
+ err_free_device:
+	platform_device_put(dcdbas_pdev);
+ err_unregister_driver:
+	platform_driver_unregister(&dcdbas_driver);
+	return error;
+}
+
+/**
+ * dcdbas_exit: perform driver cleanup
+ */
+static void __exit dcdbas_exit(void)
+{
+	/*
+	 * make sure functions that use dcdbas_pdev are called
+	 * before platform_device_unregister
+	 */
+	unregister_reboot_notifier(&dcdbas_reboot_nb);
+
+	/*
+	 * We have to free the buffer here instead of dcdbas_remove
+	 * because only in module exit function we can be sure that
+	 * all sysfs attributes belonging to this module have been
+	 * released.
+	 */
+	smi_data_buf_free();
+	platform_device_unregister(dcdbas_pdev);
+	platform_driver_unregister(&dcdbas_driver);
+}
+
+module_init(dcdbas_init);
+module_exit(dcdbas_exit);
+
+MODULE_DESCRIPTION(DRIVER_DESCRIPTION " (version " DRIVER_VERSION ")");
+MODULE_VERSION(DRIVER_VERSION);
+MODULE_AUTHOR("Dell Inc.");
+MODULE_LICENSE("GPL");
+/* Any System or BIOS claiming to be by Dell */
+MODULE_ALIAS("dmi:*:[bs]vnD[Ee][Ll][Ll]*:*");
diff --git a/drivers/firmware/dcdbas.h b/drivers/firmware/dcdbas.h
new file mode 100644
index 00000000..ca3cb0a5
--- /dev/null
+++ b/drivers/firmware/dcdbas.h
@@ -0,0 +1,107 @@
+/*
+ *  dcdbas.h: Definitions for Dell Systems Management Base driver
+ *
+ *  Copyright (C) 1995-2005 Dell Inc.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License v2.0 as published by
+ *  the Free Software Foundation.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ */
+
+#ifndef _DCDBAS_H_
+#define _DCDBAS_H_
+
+#include <linux/device.h>
+#include <linux/sysfs.h>
+#include <linux/types.h>
+
+#define MAX_SMI_DATA_BUF_SIZE			(256 * 1024)
+
+#define HC_ACTION_NONE				(0)
+#define HC_ACTION_HOST_CONTROL_POWEROFF		BIT(1)
+#define HC_ACTION_HOST_CONTROL_POWERCYCLE	BIT(2)
+
+#define HC_SMITYPE_NONE				(0)
+#define HC_SMITYPE_TYPE1			(1)
+#define HC_SMITYPE_TYPE2			(2)
+#define HC_SMITYPE_TYPE3			(3)
+
+#define ESM_APM_CMD				(0x0A0)
+#define ESM_APM_POWER_CYCLE			(0x10)
+#define ESM_STATUS_CMD_UNSUCCESSFUL		(-1)
+
+#define CMOS_BASE_PORT				(0x070)
+#define CMOS_PAGE1_INDEX_PORT			(0)
+#define CMOS_PAGE1_DATA_PORT			(1)
+#define CMOS_PAGE2_INDEX_PORT_PIIX4		(2)
+#define CMOS_PAGE2_DATA_PORT_PIIX4		(3)
+#define PE1400_APM_CONTROL_PORT			(0x0B0)
+#define PCAT_APM_CONTROL_PORT			(0x0B2)
+#define PCAT_APM_STATUS_PORT			(0x0B3)
+#define PE1300_CMOS_CMD_STRUCT_PTR		(0x38)
+#define PE1400_CMOS_CMD_STRUCT_PTR		(0x70)
+
+#define MAX_SYSMGMT_SHORTCMD_PARMBUF_LEN	(14)
+#define MAX_SYSMGMT_LONGCMD_SGENTRY_NUM		(16)
+
+#define TIMEOUT_USEC_SHORT_SEMA_BLOCKING	(10000)
+#define EXPIRED_TIMER				(0)
+
+#define SMI_CMD_MAGIC				(0x534D4931)
+
+#define DCDBAS_DEV_ATTR_RW(_name) \
+	DEVICE_ATTR(_name,0600,_name##_show,_name##_store);
+
+#define DCDBAS_DEV_ATTR_RO(_name) \
+	DEVICE_ATTR(_name,0400,_name##_show,NULL);
+
+#define DCDBAS_DEV_ATTR_WO(_name) \
+	DEVICE_ATTR(_name,0200,NULL,_name##_store);
+
+#define DCDBAS_BIN_ATTR_RW(_name) \
+struct bin_attribute bin_attr_##_name = { \
+	.attr =  { .name = __stringify(_name), \
+		   .mode = 0600 }, \
+	.read =  _name##_read, \
+	.write = _name##_write, \
+}
+
+struct smi_cmd {
+	__u32 magic;
+	__u32 ebx;
+	__u32 ecx;
+	__u16 command_address;
+	__u8 command_code;
+	__u8 reserved;
+	__u8 command_buffer[1];
+} __attribute__ ((packed));
+
+struct apm_cmd {
+	__u8 command;
+	__s8 status;
+	__u16 reserved;
+	union {
+		struct {
+			__u8 parm[MAX_SYSMGMT_SHORTCMD_PARMBUF_LEN];
+		} __attribute__ ((packed)) shortreq;
+
+		struct {
+			__u16 num_sg_entries;
+			struct {
+				__u32 size;
+				__u64 addr;
+			} __attribute__ ((packed))
+			    sglist[MAX_SYSMGMT_LONGCMD_SGENTRY_NUM];
+		} __attribute__ ((packed)) longreq;
+	} __attribute__ ((packed)) parameters;
+} __attribute__ ((packed));
+
+int dcdbas_smi_request(struct smi_cmd *smi_cmd);
+
+#endif /* _DCDBAS_H_ */
+
diff --git a/drivers/firmware/dell_rbu.c b/drivers/firmware/dell_rbu.c
new file mode 100644
index 00000000..2f452f1f
--- /dev/null
+++ b/drivers/firmware/dell_rbu.c
@@ -0,0 +1,745 @@
+/*
+ * dell_rbu.c
+ * Bios Update driver for Dell systems
+ * Author: Dell Inc
+ *         Abhay Salunke <abhay_salunke@dell.com>
+ *
+ * Copyright (C) 2005 Dell Inc.
+ *
+ * Remote BIOS Update (rbu) driver is used for updating DELL BIOS by
+ * creating entries in the /sys file systems on Linux 2.6 and higher
+ * kernels. The driver supports two mechanism to update the BIOS namely
+ * contiguous and packetized. Both these methods still require having some
+ * application to set the CMOS bit indicating the BIOS to update itself
+ * after a reboot.
+ *
+ * Contiguous method:
+ * This driver writes the incoming data in a monolithic image by allocating
+ * contiguous physical pages large enough to accommodate the incoming BIOS
+ * image size.
+ *
+ * Packetized method:
+ * The driver writes the incoming packet image by allocating a new packet
+ * on every time the packet data is written. This driver requires an
+ * application to break the BIOS image in to fixed sized packet chunks.
+ *
+ * See Documentation/dell_rbu.txt for more info.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License v2.0 as published by
+ * the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/blkdev.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+#include <linux/moduleparam.h>
+#include <linux/firmware.h>
+#include <linux/dma-mapping.h>
+
+MODULE_AUTHOR("Abhay Salunke <abhay_salunke@dell.com>");
+MODULE_DESCRIPTION("Driver for updating BIOS image on DELL systems");
+MODULE_LICENSE("GPL");
+MODULE_VERSION("3.2");
+
+#define BIOS_SCAN_LIMIT 0xffffffff
+#define MAX_IMAGE_LENGTH 16
+static struct _rbu_data {
+	void *image_update_buffer;
+	unsigned long image_update_buffer_size;
+	unsigned long bios_image_size;
+	int image_update_ordernum;
+	int dma_alloc;
+	spinlock_t lock;
+	unsigned long packet_read_count;
+	unsigned long num_packets;
+	unsigned long packetsize;
+	unsigned long imagesize;
+	int entry_created;
+} rbu_data;
+
+static char image_type[MAX_IMAGE_LENGTH + 1] = "mono";
+module_param_string(image_type, image_type, sizeof (image_type), 0);
+MODULE_PARM_DESC(image_type,
+	"BIOS image type. choose- mono or packet or init");
+
+static unsigned long allocation_floor = 0x100000;
+module_param(allocation_floor, ulong, 0644);
+MODULE_PARM_DESC(allocation_floor,
+    "Minimum address for allocations when using Packet mode");
+
+struct packet_data {
+	struct list_head list;
+	size_t length;
+	void *data;
+	int ordernum;
+};
+
+static struct packet_data packet_data_head;
+
+static struct platform_device *rbu_device;
+static int context;
+static dma_addr_t dell_rbu_dmaaddr;
+
+static void init_packet_head(void)
+{
+	INIT_LIST_HEAD(&packet_data_head.list);
+	rbu_data.packet_read_count = 0;
+	rbu_data.num_packets = 0;
+	rbu_data.packetsize = 0;
+	rbu_data.imagesize = 0;
+}
+
+static int create_packet(void *data, size_t length)
+{
+	struct packet_data *newpacket;
+	int ordernum = 0;
+	int retval = 0;
+	unsigned int packet_array_size = 0;
+	void **invalid_addr_packet_array = NULL;
+	void *packet_data_temp_buf = NULL;
+	unsigned int idx = 0;
+
+	pr_debug("create_packet: entry \n");
+
+	if (!rbu_data.packetsize) {
+		pr_debug("create_packet: packetsize not specified\n");
+		retval = -EINVAL;
+		goto out_noalloc;
+	}
+
+	spin_unlock(&rbu_data.lock);
+
+	newpacket = kzalloc(sizeof (struct packet_data), GFP_KERNEL);
+
+	if (!newpacket) {
+		printk(KERN_WARNING
+			"dell_rbu:%s: failed to allocate new "
+			"packet\n", __func__);
+		retval = -ENOMEM;
+		spin_lock(&rbu_data.lock);
+		goto out_noalloc;
+	}
+
+	ordernum = get_order(length);
+
+	/*
+	 * BIOS errata mean we cannot allocate packets below 1MB or they will
+	 * be overwritten by BIOS.
+	 *
+	 * array to temporarily hold packets
+	 * that are below the allocation floor
+	 *
+	 * NOTE: very simplistic because we only need the floor to be at 1MB
+	 *       due to BIOS errata. This shouldn't be used for higher floors
+	 *       or you will run out of mem trying to allocate the array.
+	 */
+	packet_array_size = max(
+	       		(unsigned int)(allocation_floor / rbu_data.packetsize),
+			(unsigned int)1);
+	invalid_addr_packet_array = kzalloc(packet_array_size * sizeof(void*),
+						GFP_KERNEL);
+
+	if (!invalid_addr_packet_array) {
+		printk(KERN_WARNING
+			"dell_rbu:%s: failed to allocate "
+			"invalid_addr_packet_array \n",
+			__func__);
+		retval = -ENOMEM;
+		spin_lock(&rbu_data.lock);
+		goto out_alloc_packet;
+	}
+
+	while (!packet_data_temp_buf) {
+		packet_data_temp_buf = (unsigned char *)
+			__get_free_pages(GFP_KERNEL, ordernum);
+		if (!packet_data_temp_buf) {
+			printk(KERN_WARNING
+				"dell_rbu:%s: failed to allocate new "
+				"packet\n", __func__);
+			retval = -ENOMEM;
+			spin_lock(&rbu_data.lock);
+			goto out_alloc_packet_array;
+		}
+
+		if ((unsigned long)virt_to_phys(packet_data_temp_buf)
+				< allocation_floor) {
+			pr_debug("packet 0x%lx below floor at 0x%lx.\n",
+					(unsigned long)virt_to_phys(
+						packet_data_temp_buf),
+					allocation_floor);
+			invalid_addr_packet_array[idx++] = packet_data_temp_buf;
+			packet_data_temp_buf = NULL;
+		}
+	}
+	spin_lock(&rbu_data.lock);
+
+	newpacket->data = packet_data_temp_buf;
+
+	pr_debug("create_packet: newpacket at physical addr %lx\n",
+		(unsigned long)virt_to_phys(newpacket->data));
+
+	/* packets may not have fixed size */
+	newpacket->length = length;
+	newpacket->ordernum = ordernum;
+	++rbu_data.num_packets;
+
+	/* initialize the newly created packet headers */
+	INIT_LIST_HEAD(&newpacket->list);
+	list_add_tail(&newpacket->list, &packet_data_head.list);
+
+	memcpy(newpacket->data, data, length);
+
+	pr_debug("create_packet: exit \n");
+
+out_alloc_packet_array:
+	/* always free packet array */
+	for (;idx>0;idx--) {
+		pr_debug("freeing unused packet below floor 0x%lx.\n",
+			(unsigned long)virt_to_phys(
+				invalid_addr_packet_array[idx-1]));
+		free_pages((unsigned long)invalid_addr_packet_array[idx-1],
+			ordernum);
+	}
+	kfree(invalid_addr_packet_array);
+
+out_alloc_packet:
+	/* if error, free data */
+	if (retval)
+		kfree(newpacket);
+
+out_noalloc:
+	return retval;
+}
+
+static int packetize_data(const u8 *data, size_t length)
+{
+	int rc = 0;
+	int done = 0;
+	int packet_length;
+	u8 *temp;
+	u8 *end = (u8 *) data + length;
+	pr_debug("packetize_data: data length %zd\n", length);
+	if (!rbu_data.packetsize) {
+		printk(KERN_WARNING
+			"dell_rbu: packetsize not specified\n");
+		return -EIO;
+	}
+
+	temp = (u8 *) data;
+
+	/* packetize the hunk */
+	while (!done) {
+		if ((temp + rbu_data.packetsize) < end)
+			packet_length = rbu_data.packetsize;
+		else {
+			/* this is the last packet */
+			packet_length = end - temp;
+			done = 1;
+		}
+
+		if ((rc = create_packet(temp, packet_length)))
+			return rc;
+
+		pr_debug("%p:%td\n", temp, (end - temp));
+		temp += packet_length;
+	}
+
+	rbu_data.imagesize = length;
+
+	return rc;
+}
+
+static int do_packet_read(char *data, struct list_head *ptemp_list,
+	int length, int bytes_read, int *list_read_count)
+{
+	void *ptemp_buf;
+	struct packet_data *newpacket = NULL;
+	int bytes_copied = 0;
+	int j = 0;
+
+	newpacket = list_entry(ptemp_list, struct packet_data, list);
+	*list_read_count += newpacket->length;
+
+	if (*list_read_count > bytes_read) {
+		/* point to the start of unread data */
+		j = newpacket->length - (*list_read_count - bytes_read);
+		/* point to the offset in the packet buffer */
+		ptemp_buf = (u8 *) newpacket->data + j;
+		/*
+		 * check if there is enough room in
+		 * * the incoming buffer
+		 */
+		if (length > (*list_read_count - bytes_read))
+			/*
+			 * copy what ever is there in this
+			 * packet and move on
+			 */
+			bytes_copied = (*list_read_count - bytes_read);
+		else
+			/* copy the remaining */
+			bytes_copied = length;
+		memcpy(data, ptemp_buf, bytes_copied);
+	}
+	return bytes_copied;
+}
+
+static int packet_read_list(char *data, size_t * pread_length)
+{
+	struct list_head *ptemp_list;
+	int temp_count = 0;
+	int bytes_copied = 0;
+	int bytes_read = 0;
+	int remaining_bytes = 0;
+	char *pdest = data;
+
+	/* check if we have any packets */
+	if (0 == rbu_data.num_packets)
+		return -ENOMEM;
+
+	remaining_bytes = *pread_length;
+	bytes_read = rbu_data.packet_read_count;
+
+	ptemp_list = (&packet_data_head.list)->next;
+	while (!list_empty(ptemp_list)) {
+		bytes_copied = do_packet_read(pdest, ptemp_list,
+			remaining_bytes, bytes_read, &temp_count);
+		remaining_bytes -= bytes_copied;
+		bytes_read += bytes_copied;
+		pdest += bytes_copied;
+		/*
+		 * check if we reached end of buffer before reaching the
+		 * last packet
+		 */
+		if (remaining_bytes == 0)
+			break;
+
+		ptemp_list = ptemp_list->next;
+	}
+	/*finally set the bytes read */
+	*pread_length = bytes_read - rbu_data.packet_read_count;
+	rbu_data.packet_read_count = bytes_read;
+	return 0;
+}
+
+static void packet_empty_list(void)
+{
+	struct list_head *ptemp_list;
+	struct list_head *pnext_list;
+	struct packet_data *newpacket;
+
+	ptemp_list = (&packet_data_head.list)->next;
+	while (!list_empty(ptemp_list)) {
+		newpacket =
+			list_entry(ptemp_list, struct packet_data, list);
+		pnext_list = ptemp_list->next;
+		list_del(ptemp_list);
+		ptemp_list = pnext_list;
+		/*
+		 * zero out the RBU packet memory before freeing
+		 * to make sure there are no stale RBU packets left in memory
+		 */
+		memset(newpacket->data, 0, rbu_data.packetsize);
+		free_pages((unsigned long) newpacket->data,
+			newpacket->ordernum);
+		kfree(newpacket);
+	}
+	rbu_data.packet_read_count = 0;
+	rbu_data.num_packets = 0;
+	rbu_data.imagesize = 0;
+}
+
+/*
+ * img_update_free: Frees the buffer allocated for storing BIOS image
+ * Always called with lock held and returned with lock held
+ */
+static void img_update_free(void)
+{
+	if (!rbu_data.image_update_buffer)
+		return;
+	/*
+	 * zero out this buffer before freeing it to get rid of any stale
+	 * BIOS image copied in memory.
+	 */
+	memset(rbu_data.image_update_buffer, 0,
+		rbu_data.image_update_buffer_size);
+	if (rbu_data.dma_alloc == 1)
+		dma_free_coherent(NULL, rbu_data.bios_image_size,
+			rbu_data.image_update_buffer, dell_rbu_dmaaddr);
+	else
+		free_pages((unsigned long) rbu_data.image_update_buffer,
+			rbu_data.image_update_ordernum);
+
+	/*
+	 * Re-initialize the rbu_data variables after a free
+	 */
+	rbu_data.image_update_ordernum = -1;
+	rbu_data.image_update_buffer = NULL;
+	rbu_data.image_update_buffer_size = 0;
+	rbu_data.bios_image_size = 0;
+	rbu_data.dma_alloc = 0;
+}
+
+/*
+ * img_update_realloc: This function allocates the contiguous pages to
+ * accommodate the requested size of data. The memory address and size
+ * values are stored globally and on every call to this function the new
+ * size is checked to see if more data is required than the existing size.
+ * If true the previous memory is freed and new allocation is done to
+ * accommodate the new size. If the incoming size is less then than the
+ * already allocated size, then that memory is reused. This function is
+ * called with lock held and returns with lock held.
+ */
+static int img_update_realloc(unsigned long size)
+{
+	unsigned char *image_update_buffer = NULL;
+	unsigned long rc;
+	unsigned long img_buf_phys_addr;
+	int ordernum;
+	int dma_alloc = 0;
+
+	/*
+	 * check if the buffer of sufficient size has been
+	 * already allocated
+	 */
+	if (rbu_data.image_update_buffer_size >= size) {
+		/*
+		 * check for corruption
+		 */
+		if ((size != 0) && (rbu_data.image_update_buffer == NULL)) {
+			printk(KERN_ERR "dell_rbu:%s: corruption "
+				"check failed\n", __func__);
+			return -EINVAL;
+		}
+		/*
+		 * we have a valid pre-allocated buffer with
+		 * sufficient size
+		 */
+		return 0;
+	}
+
+	/*
+	 * free any previously allocated buffer
+	 */
+	img_update_free();
+
+	spin_unlock(&rbu_data.lock);
+
+	ordernum = get_order(size);
+	image_update_buffer =
+		(unsigned char *) __get_free_pages(GFP_KERNEL, ordernum);
+
+	img_buf_phys_addr =
+		(unsigned long) virt_to_phys(image_update_buffer);
+
+	if (img_buf_phys_addr > BIOS_SCAN_LIMIT) {
+		free_pages((unsigned long) image_update_buffer, ordernum);
+		ordernum = -1;
+		image_update_buffer = dma_alloc_coherent(NULL, size,
+			&dell_rbu_dmaaddr, GFP_KERNEL);
+		dma_alloc = 1;
+	}
+
+	spin_lock(&rbu_data.lock);
+
+	if (image_update_buffer != NULL) {
+		rbu_data.image_update_buffer = image_update_buffer;
+		rbu_data.image_update_buffer_size = size;
+		rbu_data.bios_image_size =
+			rbu_data.image_update_buffer_size;
+		rbu_data.image_update_ordernum = ordernum;
+		rbu_data.dma_alloc = dma_alloc;
+		rc = 0;
+	} else {
+		pr_debug("Not enough memory for image update:"
+			"size = %ld\n", size);
+		rc = -ENOMEM;
+	}
+
+	return rc;
+}
+
+static ssize_t read_packet_data(char *buffer, loff_t pos, size_t count)
+{
+	int retval;
+	size_t bytes_left;
+	size_t data_length;
+	char *ptempBuf = buffer;
+
+	/* check to see if we have something to return */
+	if (rbu_data.num_packets == 0) {
+		pr_debug("read_packet_data: no packets written\n");
+		retval = -ENOMEM;
+		goto read_rbu_data_exit;
+	}
+
+	if (pos > rbu_data.imagesize) {
+		retval = 0;
+		printk(KERN_WARNING "dell_rbu:read_packet_data: "
+			"data underrun\n");
+		goto read_rbu_data_exit;
+	}
+
+	bytes_left = rbu_data.imagesize - pos;
+	data_length = min(bytes_left, count);
+
+	if ((retval = packet_read_list(ptempBuf, &data_length)) < 0)
+		goto read_rbu_data_exit;
+
+	if ((pos + count) > rbu_data.imagesize) {
+		rbu_data.packet_read_count = 0;
+		/* this was the last copy */
+		retval = bytes_left;
+	} else
+		retval = count;
+
+      read_rbu_data_exit:
+	return retval;
+}
+
+static ssize_t read_rbu_mono_data(char *buffer, loff_t pos, size_t count)
+{
+	/* check to see if we have something to return */
+	if ((rbu_data.image_update_buffer == NULL) ||
+		(rbu_data.bios_image_size == 0)) {
+		pr_debug("read_rbu_data_mono: image_update_buffer %p ,"
+			"bios_image_size %lu\n",
+			rbu_data.image_update_buffer,
+			rbu_data.bios_image_size);
+		return -ENOMEM;
+	}
+
+	return memory_read_from_buffer(buffer, count, &pos,
+			rbu_data.image_update_buffer, rbu_data.bios_image_size);
+}
+
+static ssize_t read_rbu_data(struct file *filp, struct kobject *kobj,
+			     struct bin_attribute *bin_attr,
+			     char *buffer, loff_t pos, size_t count)
+{
+	ssize_t ret_count = 0;
+
+	spin_lock(&rbu_data.lock);
+
+	if (!strcmp(image_type, "mono"))
+		ret_count = read_rbu_mono_data(buffer, pos, count);
+	else if (!strcmp(image_type, "packet"))
+		ret_count = read_packet_data(buffer, pos, count);
+	else
+		pr_debug("read_rbu_data: invalid image type specified\n");
+
+	spin_unlock(&rbu_data.lock);
+	return ret_count;
+}
+
+static void callbackfn_rbu(const struct firmware *fw, void *context)
+{
+	rbu_data.entry_created = 0;
+
+	if (!fw)
+		return;
+
+	if (!fw->size)
+		goto out;
+
+	spin_lock(&rbu_data.lock);
+	if (!strcmp(image_type, "mono")) {
+		if (!img_update_realloc(fw->size))
+			memcpy(rbu_data.image_update_buffer,
+				fw->data, fw->size);
+	} else if (!strcmp(image_type, "packet")) {
+		/*
+		 * we need to free previous packets if a
+		 * new hunk of packets needs to be downloaded
+		 */
+		packet_empty_list();
+		if (packetize_data(fw->data, fw->size))
+			/* Incase something goes wrong when we are
+			 * in middle of packetizing the data, we
+			 * need to free up whatever packets might
+			 * have been created before we quit.
+			 */
+			packet_empty_list();
+	} else
+		pr_debug("invalid image type specified.\n");
+	spin_unlock(&rbu_data.lock);
+ out:
+	release_firmware(fw);
+}
+
+static ssize_t read_rbu_image_type(struct file *filp, struct kobject *kobj,
+				   struct bin_attribute *bin_attr,
+				   char *buffer, loff_t pos, size_t count)
+{
+	int size = 0;
+	if (!pos)
+		size = scnprintf(buffer, count, "%s\n", image_type);
+	return size;
+}
+
+static ssize_t write_rbu_image_type(struct file *filp, struct kobject *kobj,
+				    struct bin_attribute *bin_attr,
+				    char *buffer, loff_t pos, size_t count)
+{
+	int rc = count;
+	int req_firm_rc = 0;
+	int i;
+	spin_lock(&rbu_data.lock);
+	/*
+	 * Find the first newline or space
+	 */
+	for (i = 0; i < count; ++i)
+		if (buffer[i] == '\n' || buffer[i] == ' ') {
+			buffer[i] = '\0';
+			break;
+		}
+	if (i == count)
+		buffer[count] = '\0';
+
+	if (strstr(buffer, "mono"))
+		strcpy(image_type, "mono");
+	else if (strstr(buffer, "packet"))
+		strcpy(image_type, "packet");
+	else if (strstr(buffer, "init")) {
+		/*
+		 * If due to the user error the driver gets in a bad
+		 * state where even though it is loaded , the
+		 * /sys/class/firmware/dell_rbu entries are missing.
+		 * to cover this situation the user can recreate entries
+		 * by writing init to image_type.
+		 */
+		if (!rbu_data.entry_created) {
+			spin_unlock(&rbu_data.lock);
+			req_firm_rc = request_firmware_nowait(THIS_MODULE,
+				FW_ACTION_NOHOTPLUG, "dell_rbu",
+				&rbu_device->dev, GFP_KERNEL, &context,
+				callbackfn_rbu);
+			if (req_firm_rc) {
+				printk(KERN_ERR
+					"dell_rbu:%s request_firmware_nowait"
+					" failed %d\n", __func__, rc);
+				rc = -EIO;
+			} else
+				rbu_data.entry_created = 1;
+
+			spin_lock(&rbu_data.lock);
+		}
+	} else {
+		printk(KERN_WARNING "dell_rbu: image_type is invalid\n");
+		spin_unlock(&rbu_data.lock);
+		return -EINVAL;
+	}
+
+	/* we must free all previous allocations */
+	packet_empty_list();
+	img_update_free();
+	spin_unlock(&rbu_data.lock);
+
+	return rc;
+}
+
+static ssize_t read_rbu_packet_size(struct file *filp, struct kobject *kobj,
+				    struct bin_attribute *bin_attr,
+				    char *buffer, loff_t pos, size_t count)
+{
+	int size = 0;
+	if (!pos) {
+		spin_lock(&rbu_data.lock);
+		size = scnprintf(buffer, count, "%lu\n", rbu_data.packetsize);
+		spin_unlock(&rbu_data.lock);
+	}
+	return size;
+}
+
+static ssize_t write_rbu_packet_size(struct file *filp, struct kobject *kobj,
+				     struct bin_attribute *bin_attr,
+				     char *buffer, loff_t pos, size_t count)
+{
+	unsigned long temp;
+	spin_lock(&rbu_data.lock);
+	packet_empty_list();
+	sscanf(buffer, "%lu", &temp);
+	if (temp < 0xffffffff)
+		rbu_data.packetsize = temp;
+
+	spin_unlock(&rbu_data.lock);
+	return count;
+}
+
+static struct bin_attribute rbu_data_attr = {
+	.attr = {.name = "data", .mode = 0444},
+	.read = read_rbu_data,
+};
+
+static struct bin_attribute rbu_image_type_attr = {
+	.attr = {.name = "image_type", .mode = 0644},
+	.read = read_rbu_image_type,
+	.write = write_rbu_image_type,
+};
+
+static struct bin_attribute rbu_packet_size_attr = {
+	.attr = {.name = "packet_size", .mode = 0644},
+	.read = read_rbu_packet_size,
+	.write = write_rbu_packet_size,
+};
+
+static int __init dcdrbu_init(void)
+{
+	int rc;
+	spin_lock_init(&rbu_data.lock);
+
+	init_packet_head();
+	rbu_device = platform_device_register_simple("dell_rbu", -1, NULL, 0);
+	if (IS_ERR(rbu_device)) {
+		printk(KERN_ERR
+			"dell_rbu:%s:platform_device_register_simple "
+			"failed\n", __func__);
+		return PTR_ERR(rbu_device);
+	}
+
+	rc = sysfs_create_bin_file(&rbu_device->dev.kobj, &rbu_data_attr);
+	if (rc)
+		goto out_devreg;
+	rc = sysfs_create_bin_file(&rbu_device->dev.kobj, &rbu_image_type_attr);
+	if (rc)
+		goto out_data;
+	rc = sysfs_create_bin_file(&rbu_device->dev.kobj,
+		&rbu_packet_size_attr);
+	if (rc)
+		goto out_imtype;
+
+	rbu_data.entry_created = 0;
+	return 0;
+
+out_imtype:
+	sysfs_remove_bin_file(&rbu_device->dev.kobj, &rbu_image_type_attr);
+out_data:
+	sysfs_remove_bin_file(&rbu_device->dev.kobj, &rbu_data_attr);
+out_devreg:
+	platform_device_unregister(rbu_device);
+	return rc;
+}
+
+static __exit void dcdrbu_exit(void)
+{
+	spin_lock(&rbu_data.lock);
+	packet_empty_list();
+	img_update_free();
+	spin_unlock(&rbu_data.lock);
+	platform_device_unregister(rbu_device);
+}
+
+module_exit(dcdrbu_exit);
+module_init(dcdrbu_init);
+
+/* vim:noet:ts=8:sw=8
+*/
diff --git a/drivers/firmware/dmi-id.c b/drivers/firmware/dmi-id.c
new file mode 100644
index 00000000..94a58a08
--- /dev/null
+++ b/drivers/firmware/dmi-id.c
@@ -0,0 +1,245 @@
+/*
+ * Export SMBIOS/DMI info via sysfs to userspace
+ *
+ * Copyright 2007, Lennart Poettering
+ *
+ * Licensed under GPLv2
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/dmi.h>
+#include <linux/device.h>
+#include <linux/slab.h>
+
+struct dmi_device_attribute{
+	struct device_attribute dev_attr;
+	int field;
+};
+#define to_dmi_dev_attr(_dev_attr) \
+	container_of(_dev_attr, struct dmi_device_attribute, dev_attr)
+
+static ssize_t sys_dmi_field_show(struct device *dev,
+				  struct device_attribute *attr,
+				  char *page)
+{
+	int field = to_dmi_dev_attr(attr)->field;
+	ssize_t len;
+	len = scnprintf(page, PAGE_SIZE, "%s\n", dmi_get_system_info(field));
+	page[len-1] = '\n';
+	return len;
+}
+
+#define DMI_ATTR(_name, _mode, _show, _field)			\
+	{ .dev_attr = __ATTR(_name, _mode, _show, NULL),	\
+	  .field = _field }
+
+#define DEFINE_DMI_ATTR_WITH_SHOW(_name, _mode, _field)		\
+static struct dmi_device_attribute sys_dmi_##_name##_attr =	\
+	DMI_ATTR(_name, _mode, sys_dmi_field_show, _field);
+
+DEFINE_DMI_ATTR_WITH_SHOW(bios_vendor,		0444, DMI_BIOS_VENDOR);
+DEFINE_DMI_ATTR_WITH_SHOW(bios_version,		0444, DMI_BIOS_VERSION);
+DEFINE_DMI_ATTR_WITH_SHOW(bios_date,		0444, DMI_BIOS_DATE);
+DEFINE_DMI_ATTR_WITH_SHOW(sys_vendor,		0444, DMI_SYS_VENDOR);
+DEFINE_DMI_ATTR_WITH_SHOW(product_name,		0444, DMI_PRODUCT_NAME);
+DEFINE_DMI_ATTR_WITH_SHOW(product_version,	0444, DMI_PRODUCT_VERSION);
+DEFINE_DMI_ATTR_WITH_SHOW(product_serial,	0400, DMI_PRODUCT_SERIAL);
+DEFINE_DMI_ATTR_WITH_SHOW(product_uuid,		0400, DMI_PRODUCT_UUID);
+DEFINE_DMI_ATTR_WITH_SHOW(board_vendor,		0444, DMI_BOARD_VENDOR);
+DEFINE_DMI_ATTR_WITH_SHOW(board_name,		0444, DMI_BOARD_NAME);
+DEFINE_DMI_ATTR_WITH_SHOW(board_version,	0444, DMI_BOARD_VERSION);
+DEFINE_DMI_ATTR_WITH_SHOW(board_serial,		0400, DMI_BOARD_SERIAL);
+DEFINE_DMI_ATTR_WITH_SHOW(board_asset_tag,	0444, DMI_BOARD_ASSET_TAG);
+DEFINE_DMI_ATTR_WITH_SHOW(chassis_vendor,	0444, DMI_CHASSIS_VENDOR);
+DEFINE_DMI_ATTR_WITH_SHOW(chassis_type,		0444, DMI_CHASSIS_TYPE);
+DEFINE_DMI_ATTR_WITH_SHOW(chassis_version,	0444, DMI_CHASSIS_VERSION);
+DEFINE_DMI_ATTR_WITH_SHOW(chassis_serial,	0400, DMI_CHASSIS_SERIAL);
+DEFINE_DMI_ATTR_WITH_SHOW(chassis_asset_tag,	0444, DMI_CHASSIS_ASSET_TAG);
+
+static void ascii_filter(char *d, const char *s)
+{
+	/* Filter out characters we don't want to see in the modalias string */
+	for (; *s; s++)
+		if (*s > ' ' && *s < 127 && *s != ':')
+			*(d++) = *s;
+
+	*d = 0;
+}
+
+static ssize_t get_modalias(char *buffer, size_t buffer_size)
+{
+	static const struct mafield {
+		const char *prefix;
+		int field;
+	} fields[] = {
+		{ "bvn", DMI_BIOS_VENDOR },
+		{ "bvr", DMI_BIOS_VERSION },
+		{ "bd",  DMI_BIOS_DATE },
+		{ "svn", DMI_SYS_VENDOR },
+		{ "pn",  DMI_PRODUCT_NAME },
+		{ "pvr", DMI_PRODUCT_VERSION },
+		{ "rvn", DMI_BOARD_VENDOR },
+		{ "rn",  DMI_BOARD_NAME },
+		{ "rvr", DMI_BOARD_VERSION },
+		{ "cvn", DMI_CHASSIS_VENDOR },
+		{ "ct",  DMI_CHASSIS_TYPE },
+		{ "cvr", DMI_CHASSIS_VERSION },
+		{ NULL,  DMI_NONE }
+	};
+
+	ssize_t l, left;
+	char *p;
+	const struct mafield *f;
+
+	strcpy(buffer, "dmi");
+	p = buffer + 3; left = buffer_size - 4;
+
+	for (f = fields; f->prefix && left > 0; f++) {
+		const char *c;
+		char *t;
+
+		c = dmi_get_system_info(f->field);
+		if (!c)
+			continue;
+
+		t = kmalloc(strlen(c) + 1, GFP_KERNEL);
+		if (!t)
+			break;
+		ascii_filter(t, c);
+		l = scnprintf(p, left, ":%s%s", f->prefix, t);
+		kfree(t);
+
+		p += l;
+		left -= l;
+	}
+
+	p[0] = ':';
+	p[1] = 0;
+
+	return p - buffer + 1;
+}
+
+static ssize_t sys_dmi_modalias_show(struct device *dev,
+				     struct device_attribute *attr, char *page)
+{
+	ssize_t r;
+	r = get_modalias(page, PAGE_SIZE-1);
+	page[r] = '\n';
+	page[r+1] = 0;
+	return r+1;
+}
+
+static struct device_attribute sys_dmi_modalias_attr =
+	__ATTR(modalias, 0444, sys_dmi_modalias_show, NULL);
+
+static struct attribute *sys_dmi_attributes[DMI_STRING_MAX+2];
+
+static struct attribute_group sys_dmi_attribute_group = {
+	.attrs = sys_dmi_attributes,
+};
+
+static const struct attribute_group* sys_dmi_attribute_groups[] = {
+	&sys_dmi_attribute_group,
+	NULL
+};
+
+static int dmi_dev_uevent(struct device *dev, struct kobj_uevent_env *env)
+{
+	ssize_t len;
+
+	if (add_uevent_var(env, "MODALIAS="))
+		return -ENOMEM;
+	len = get_modalias(&env->buf[env->buflen - 1],
+			   sizeof(env->buf) - env->buflen);
+	if (len >= (sizeof(env->buf) - env->buflen))
+		return -ENOMEM;
+	env->buflen += len;
+	return 0;
+}
+
+static struct class dmi_class = {
+	.name = "dmi",
+	.dev_release = (void(*)(struct device *)) kfree,
+	.dev_uevent = dmi_dev_uevent,
+};
+
+static struct device *dmi_dev;
+
+/* Initialization */
+
+#define ADD_DMI_ATTR(_name, _field) \
+	if (dmi_get_system_info(_field)) \
+		sys_dmi_attributes[i++] = &sys_dmi_##_name##_attr.dev_attr.attr;
+
+/* In a separate function to keep gcc 3.2 happy - do NOT merge this in
+   dmi_id_init! */
+static void __init dmi_id_init_attr_table(void)
+{
+	int i;
+
+	/* Not necessarily all DMI fields are available on all
+	 * systems, hence let's built an attribute table of just
+	 * what's available */
+	i = 0;
+	ADD_DMI_ATTR(bios_vendor,       DMI_BIOS_VENDOR);
+	ADD_DMI_ATTR(bios_version,      DMI_BIOS_VERSION);
+	ADD_DMI_ATTR(bios_date,         DMI_BIOS_DATE);
+	ADD_DMI_ATTR(sys_vendor,        DMI_SYS_VENDOR);
+	ADD_DMI_ATTR(product_name,      DMI_PRODUCT_NAME);
+	ADD_DMI_ATTR(product_version,   DMI_PRODUCT_VERSION);
+	ADD_DMI_ATTR(product_serial,    DMI_PRODUCT_SERIAL);
+	ADD_DMI_ATTR(product_uuid,      DMI_PRODUCT_UUID);
+	ADD_DMI_ATTR(board_vendor,      DMI_BOARD_VENDOR);
+	ADD_DMI_ATTR(board_name,        DMI_BOARD_NAME);
+	ADD_DMI_ATTR(board_version,     DMI_BOARD_VERSION);
+	ADD_DMI_ATTR(board_serial,      DMI_BOARD_SERIAL);
+	ADD_DMI_ATTR(board_asset_tag,   DMI_BOARD_ASSET_TAG);
+	ADD_DMI_ATTR(chassis_vendor,    DMI_CHASSIS_VENDOR);
+	ADD_DMI_ATTR(chassis_type,      DMI_CHASSIS_TYPE);
+	ADD_DMI_ATTR(chassis_version,   DMI_CHASSIS_VERSION);
+	ADD_DMI_ATTR(chassis_serial,    DMI_CHASSIS_SERIAL);
+	ADD_DMI_ATTR(chassis_asset_tag, DMI_CHASSIS_ASSET_TAG);
+	sys_dmi_attributes[i++] = &sys_dmi_modalias_attr.attr;
+}
+
+static int __init dmi_id_init(void)
+{
+	int ret;
+
+	if (!dmi_available)
+		return -ENODEV;
+
+	dmi_id_init_attr_table();
+
+	ret = class_register(&dmi_class);
+	if (ret)
+		return ret;
+
+	dmi_dev = kzalloc(sizeof(*dmi_dev), GFP_KERNEL);
+	if (!dmi_dev) {
+		ret = -ENOMEM;
+		goto fail_class_unregister;
+	}
+
+	dmi_dev->class = &dmi_class;
+	dev_set_name(dmi_dev, "id");
+	dmi_dev->groups = sys_dmi_attribute_groups;
+
+	ret = device_register(dmi_dev);
+	if (ret)
+		goto fail_free_dmi_dev;
+
+	return 0;
+
+fail_free_dmi_dev:
+	kfree(dmi_dev);
+fail_class_unregister:
+
+	class_unregister(&dmi_class);
+
+	return ret;
+}
+
+arch_initcall(dmi_id_init);
diff --git a/drivers/firmware/dmi-sysfs.c b/drivers/firmware/dmi-sysfs.c
new file mode 100644
index 00000000..eb26d62e
--- /dev/null
+++ b/drivers/firmware/dmi-sysfs.c
@@ -0,0 +1,696 @@
+/*
+ * dmi-sysfs.c
+ *
+ * This module exports the DMI tables read-only to userspace through the
+ * sysfs file system.
+ *
+ * Data is currently found below
+ *    /sys/firmware/dmi/...
+ *
+ * DMI attributes are presented in attribute files with names
+ * formatted using %d-%d, so that the first integer indicates the
+ * structure type (0-255), and the second field is the instance of that
+ * entry.
+ *
+ * Copyright 2011 Google, Inc.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kobject.h>
+#include <linux/dmi.h>
+#include <linux/capability.h>
+#include <linux/slab.h>
+#include <linux/list.h>
+#include <linux/io.h>
+
+#define MAX_ENTRY_TYPE 255 /* Most of these aren't used, but we consider
+			      the top entry type is only 8 bits */
+
+struct dmi_sysfs_entry {
+	struct dmi_header dh;
+	struct kobject kobj;
+	int instance;
+	int position;
+	struct list_head list;
+	struct kobject *child;
+};
+
+/*
+ * Global list of dmi_sysfs_entry.  Even though this should only be
+ * manipulated at setup and teardown, the lazy nature of the kobject
+ * system means we get lazy removes.
+ */
+static LIST_HEAD(entry_list);
+static DEFINE_SPINLOCK(entry_list_lock);
+
+/* dmi_sysfs_attribute - Top level attribute. used by all entries. */
+struct dmi_sysfs_attribute {
+	struct attribute attr;
+	ssize_t (*show)(struct dmi_sysfs_entry *entry, char *buf);
+};
+
+#define DMI_SYSFS_ATTR(_entry, _name) \
+struct dmi_sysfs_attribute dmi_sysfs_attr_##_entry##_##_name = { \
+	.attr = {.name = __stringify(_name), .mode = 0400}, \
+	.show = dmi_sysfs_##_entry##_##_name, \
+}
+
+/*
+ * dmi_sysfs_mapped_attribute - Attribute where we require the entry be
+ * mapped in.  Use in conjunction with dmi_sysfs_specialize_attr_ops.
+ */
+struct dmi_sysfs_mapped_attribute {
+	struct attribute attr;
+	ssize_t (*show)(struct dmi_sysfs_entry *entry,
+			const struct dmi_header *dh,
+			char *buf);
+};
+
+#define DMI_SYSFS_MAPPED_ATTR(_entry, _name) \
+struct dmi_sysfs_mapped_attribute dmi_sysfs_attr_##_entry##_##_name = { \
+	.attr = {.name = __stringify(_name), .mode = 0400}, \
+	.show = dmi_sysfs_##_entry##_##_name, \
+}
+
+/*************************************************
+ * Generic DMI entry support.
+ *************************************************/
+static void dmi_entry_free(struct kobject *kobj)
+{
+	kfree(kobj);
+}
+
+static struct dmi_sysfs_entry *to_entry(struct kobject *kobj)
+{
+	return container_of(kobj, struct dmi_sysfs_entry, kobj);
+}
+
+static struct dmi_sysfs_attribute *to_attr(struct attribute *attr)
+{
+	return container_of(attr, struct dmi_sysfs_attribute, attr);
+}
+
+static ssize_t dmi_sysfs_attr_show(struct kobject *kobj,
+				   struct attribute *_attr, char *buf)
+{
+	struct dmi_sysfs_entry *entry = to_entry(kobj);
+	struct dmi_sysfs_attribute *attr = to_attr(_attr);
+
+	/* DMI stuff is only ever admin visible */
+	if (!capable(CAP_SYS_ADMIN))
+		return -EACCES;
+
+	return attr->show(entry, buf);
+}
+
+static const struct sysfs_ops dmi_sysfs_attr_ops = {
+	.show = dmi_sysfs_attr_show,
+};
+
+typedef ssize_t (*dmi_callback)(struct dmi_sysfs_entry *,
+				const struct dmi_header *dh, void *);
+
+struct find_dmi_data {
+	struct dmi_sysfs_entry	*entry;
+	dmi_callback		callback;
+	void			*private;
+	int			instance_countdown;
+	ssize_t			ret;
+};
+
+static void find_dmi_entry_helper(const struct dmi_header *dh,
+				  void *_data)
+{
+	struct find_dmi_data *data = _data;
+	struct dmi_sysfs_entry *entry = data->entry;
+
+	/* Is this the entry we want? */
+	if (dh->type != entry->dh.type)
+		return;
+
+	if (data->instance_countdown != 0) {
+		/* try the next instance? */
+		data->instance_countdown--;
+		return;
+	}
+
+	/*
+	 * Don't ever revisit the instance.  Short circuit later
+	 * instances by letting the instance_countdown run negative
+	 */
+	data->instance_countdown--;
+
+	/* Found the entry */
+	data->ret = data->callback(entry, dh, data->private);
+}
+
+/* State for passing the read parameters through dmi_find_entry() */
+struct dmi_read_state {
+	char *buf;
+	loff_t pos;
+	size_t count;
+};
+
+static ssize_t find_dmi_entry(struct dmi_sysfs_entry *entry,
+			      dmi_callback callback, void *private)
+{
+	struct find_dmi_data data = {
+		.entry = entry,
+		.callback = callback,
+		.private = private,
+		.instance_countdown = entry->instance,
+		.ret = -EIO,  /* To signal the entry disappeared */
+	};
+	int ret;
+
+	ret = dmi_walk(find_dmi_entry_helper, &data);
+	/* This shouldn't happen, but just in case. */
+	if (ret)
+		return -EINVAL;
+	return data.ret;
+}
+
+/*
+ * Calculate and return the byte length of the dmi entry identified by
+ * dh.  This includes both the formatted portion as well as the
+ * unformatted string space, including the two trailing nul characters.
+ */
+static size_t dmi_entry_length(const struct dmi_header *dh)
+{
+	const char *p = (const char *)dh;
+
+	p += dh->length;
+
+	while (p[0] || p[1])
+		p++;
+
+	return 2 + p - (const char *)dh;
+}
+
+/*************************************************
+ * Support bits for specialized DMI entry support
+ *************************************************/
+struct dmi_entry_attr_show_data {
+	struct attribute *attr;
+	char *buf;
+};
+
+static ssize_t dmi_entry_attr_show_helper(struct dmi_sysfs_entry *entry,
+					  const struct dmi_header *dh,
+					  void *_data)
+{
+	struct dmi_entry_attr_show_data *data = _data;
+	struct dmi_sysfs_mapped_attribute *attr;
+
+	attr = container_of(data->attr,
+			    struct dmi_sysfs_mapped_attribute, attr);
+	return attr->show(entry, dh, data->buf);
+}
+
+static ssize_t dmi_entry_attr_show(struct kobject *kobj,
+				   struct attribute *attr,
+				   char *buf)
+{
+	struct dmi_entry_attr_show_data data = {
+		.attr = attr,
+		.buf  = buf,
+	};
+	/* Find the entry according to our parent and call the
+	 * normalized show method hanging off of the attribute */
+	return find_dmi_entry(to_entry(kobj->parent),
+			      dmi_entry_attr_show_helper, &data);
+}
+
+static const struct sysfs_ops dmi_sysfs_specialize_attr_ops = {
+	.show = dmi_entry_attr_show,
+};
+
+/*************************************************
+ * Specialized DMI entry support.
+ *************************************************/
+
+/*** Type 15 - System Event Table ***/
+
+#define DMI_SEL_ACCESS_METHOD_IO8	0x00
+#define DMI_SEL_ACCESS_METHOD_IO2x8	0x01
+#define DMI_SEL_ACCESS_METHOD_IO16	0x02
+#define DMI_SEL_ACCESS_METHOD_PHYS32	0x03
+#define DMI_SEL_ACCESS_METHOD_GPNV	0x04
+
+struct dmi_system_event_log {
+	struct dmi_header header;
+	u16	area_length;
+	u16	header_start_offset;
+	u16	data_start_offset;
+	u8	access_method;
+	u8	status;
+	u32	change_token;
+	union {
+		struct {
+			u16 index_addr;
+			u16 data_addr;
+		} io;
+		u32	phys_addr32;
+		u16	gpnv_handle;
+		u32	access_method_address;
+	};
+	u8	header_format;
+	u8	type_descriptors_supported_count;
+	u8	per_log_type_descriptor_length;
+	u8	supported_log_type_descriptos[0];
+} __packed;
+
+#define DMI_SYSFS_SEL_FIELD(_field) \
+static ssize_t dmi_sysfs_sel_##_field(struct dmi_sysfs_entry *entry, \
+				      const struct dmi_header *dh, \
+				      char *buf) \
+{ \
+	struct dmi_system_event_log sel; \
+	if (sizeof(sel) > dmi_entry_length(dh)) \
+		return -EIO; \
+	memcpy(&sel, dh, sizeof(sel)); \
+	return sprintf(buf, "%u\n", sel._field); \
+} \
+static DMI_SYSFS_MAPPED_ATTR(sel, _field)
+
+DMI_SYSFS_SEL_FIELD(area_length);
+DMI_SYSFS_SEL_FIELD(header_start_offset);
+DMI_SYSFS_SEL_FIELD(data_start_offset);
+DMI_SYSFS_SEL_FIELD(access_method);
+DMI_SYSFS_SEL_FIELD(status);
+DMI_SYSFS_SEL_FIELD(change_token);
+DMI_SYSFS_SEL_FIELD(access_method_address);
+DMI_SYSFS_SEL_FIELD(header_format);
+DMI_SYSFS_SEL_FIELD(type_descriptors_supported_count);
+DMI_SYSFS_SEL_FIELD(per_log_type_descriptor_length);
+
+static struct attribute *dmi_sysfs_sel_attrs[] = {
+	&dmi_sysfs_attr_sel_area_length.attr,
+	&dmi_sysfs_attr_sel_header_start_offset.attr,
+	&dmi_sysfs_attr_sel_data_start_offset.attr,
+	&dmi_sysfs_attr_sel_access_method.attr,
+	&dmi_sysfs_attr_sel_status.attr,
+	&dmi_sysfs_attr_sel_change_token.attr,
+	&dmi_sysfs_attr_sel_access_method_address.attr,
+	&dmi_sysfs_attr_sel_header_format.attr,
+	&dmi_sysfs_attr_sel_type_descriptors_supported_count.attr,
+	&dmi_sysfs_attr_sel_per_log_type_descriptor_length.attr,
+	NULL,
+};
+
+
+static struct kobj_type dmi_system_event_log_ktype = {
+	.release = dmi_entry_free,
+	.sysfs_ops = &dmi_sysfs_specialize_attr_ops,
+	.default_attrs = dmi_sysfs_sel_attrs,
+};
+
+typedef u8 (*sel_io_reader)(const struct dmi_system_event_log *sel,
+			    loff_t offset);
+
+static DEFINE_MUTEX(io_port_lock);
+
+static u8 read_sel_8bit_indexed_io(const struct dmi_system_event_log *sel,
+				   loff_t offset)
+{
+	u8 ret;
+
+	mutex_lock(&io_port_lock);
+	outb((u8)offset, sel->io.index_addr);
+	ret = inb(sel->io.data_addr);
+	mutex_unlock(&io_port_lock);
+	return ret;
+}
+
+static u8 read_sel_2x8bit_indexed_io(const struct dmi_system_event_log *sel,
+				     loff_t offset)
+{
+	u8 ret;
+
+	mutex_lock(&io_port_lock);
+	outb((u8)offset, sel->io.index_addr);
+	outb((u8)(offset >> 8), sel->io.index_addr + 1);
+	ret = inb(sel->io.data_addr);
+	mutex_unlock(&io_port_lock);
+	return ret;
+}
+
+static u8 read_sel_16bit_indexed_io(const struct dmi_system_event_log *sel,
+				    loff_t offset)
+{
+	u8 ret;
+
+	mutex_lock(&io_port_lock);
+	outw((u16)offset, sel->io.index_addr);
+	ret = inb(sel->io.data_addr);
+	mutex_unlock(&io_port_lock);
+	return ret;
+}
+
+static sel_io_reader sel_io_readers[] = {
+	[DMI_SEL_ACCESS_METHOD_IO8]	= read_sel_8bit_indexed_io,
+	[DMI_SEL_ACCESS_METHOD_IO2x8]	= read_sel_2x8bit_indexed_io,
+	[DMI_SEL_ACCESS_METHOD_IO16]	= read_sel_16bit_indexed_io,
+};
+
+static ssize_t dmi_sel_raw_read_io(struct dmi_sysfs_entry *entry,
+				   const struct dmi_system_event_log *sel,
+				   char *buf, loff_t pos, size_t count)
+{
+	ssize_t wrote = 0;
+
+	sel_io_reader io_reader = sel_io_readers[sel->access_method];
+
+	while (count && pos < sel->area_length) {
+		count--;
+		*(buf++) = io_reader(sel, pos++);
+		wrote++;
+	}
+
+	return wrote;
+}
+
+static ssize_t dmi_sel_raw_read_phys32(struct dmi_sysfs_entry *entry,
+				       const struct dmi_system_event_log *sel,
+				       char *buf, loff_t pos, size_t count)
+{
+	u8 __iomem *mapped;
+	ssize_t wrote = 0;
+
+	mapped = ioremap(sel->access_method_address, sel->area_length);
+	if (!mapped)
+		return -EIO;
+
+	while (count && pos < sel->area_length) {
+		count--;
+		*(buf++) = readb(mapped + pos++);
+		wrote++;
+	}
+
+	iounmap(mapped);
+	return wrote;
+}
+
+static ssize_t dmi_sel_raw_read_helper(struct dmi_sysfs_entry *entry,
+				       const struct dmi_header *dh,
+				       void *_state)
+{
+	struct dmi_read_state *state = _state;
+	struct dmi_system_event_log sel;
+
+	if (sizeof(sel) > dmi_entry_length(dh))
+		return -EIO;
+
+	memcpy(&sel, dh, sizeof(sel));
+
+	switch (sel.access_method) {
+	case DMI_SEL_ACCESS_METHOD_IO8:
+	case DMI_SEL_ACCESS_METHOD_IO2x8:
+	case DMI_SEL_ACCESS_METHOD_IO16:
+		return dmi_sel_raw_read_io(entry, &sel, state->buf,
+					   state->pos, state->count);
+	case DMI_SEL_ACCESS_METHOD_PHYS32:
+		return dmi_sel_raw_read_phys32(entry, &sel, state->buf,
+					       state->pos, state->count);
+	case DMI_SEL_ACCESS_METHOD_GPNV:
+		pr_info("dmi-sysfs: GPNV support missing.\n");
+		return -EIO;
+	default:
+		pr_info("dmi-sysfs: Unknown access method %02x\n",
+			sel.access_method);
+		return -EIO;
+	}
+}
+
+static ssize_t dmi_sel_raw_read(struct file *filp, struct kobject *kobj,
+				struct bin_attribute *bin_attr,
+				char *buf, loff_t pos, size_t count)
+{
+	struct dmi_sysfs_entry *entry = to_entry(kobj->parent);
+	struct dmi_read_state state = {
+		.buf = buf,
+		.pos = pos,
+		.count = count,
+	};
+
+	return find_dmi_entry(entry, dmi_sel_raw_read_helper, &state);
+}
+
+static struct bin_attribute dmi_sel_raw_attr = {
+	.attr = {.name = "raw_event_log", .mode = 0400},
+	.read = dmi_sel_raw_read,
+};
+
+static int dmi_system_event_log(struct dmi_sysfs_entry *entry)
+{
+	int ret;
+
+	entry->child = kzalloc(sizeof(*entry->child), GFP_KERNEL);
+	if (!entry->child)
+		return -ENOMEM;
+	ret = kobject_init_and_add(entry->child,
+				   &dmi_system_event_log_ktype,
+				   &entry->kobj,
+				   "system_event_log");
+	if (ret)
+		goto out_free;
+
+	ret = sysfs_create_bin_file(entry->child, &dmi_sel_raw_attr);
+	if (ret)
+		goto out_del;
+
+	return 0;
+
+out_del:
+	kobject_del(entry->child);
+out_free:
+	kfree(entry->child);
+	return ret;
+}
+
+/*************************************************
+ * Generic DMI entry support.
+ *************************************************/
+
+static ssize_t dmi_sysfs_entry_length(struct dmi_sysfs_entry *entry, char *buf)
+{
+	return sprintf(buf, "%d\n", entry->dh.length);
+}
+
+static ssize_t dmi_sysfs_entry_handle(struct dmi_sysfs_entry *entry, char *buf)
+{
+	return sprintf(buf, "%d\n", entry->dh.handle);
+}
+
+static ssize_t dmi_sysfs_entry_type(struct dmi_sysfs_entry *entry, char *buf)
+{
+	return sprintf(buf, "%d\n", entry->dh.type);
+}
+
+static ssize_t dmi_sysfs_entry_instance(struct dmi_sysfs_entry *entry,
+					char *buf)
+{
+	return sprintf(buf, "%d\n", entry->instance);
+}
+
+static ssize_t dmi_sysfs_entry_position(struct dmi_sysfs_entry *entry,
+					char *buf)
+{
+	return sprintf(buf, "%d\n", entry->position);
+}
+
+static DMI_SYSFS_ATTR(entry, length);
+static DMI_SYSFS_ATTR(entry, handle);
+static DMI_SYSFS_ATTR(entry, type);
+static DMI_SYSFS_ATTR(entry, instance);
+static DMI_SYSFS_ATTR(entry, position);
+
+static struct attribute *dmi_sysfs_entry_attrs[] = {
+	&dmi_sysfs_attr_entry_length.attr,
+	&dmi_sysfs_attr_entry_handle.attr,
+	&dmi_sysfs_attr_entry_type.attr,
+	&dmi_sysfs_attr_entry_instance.attr,
+	&dmi_sysfs_attr_entry_position.attr,
+	NULL,
+};
+
+static ssize_t dmi_entry_raw_read_helper(struct dmi_sysfs_entry *entry,
+					 const struct dmi_header *dh,
+					 void *_state)
+{
+	struct dmi_read_state *state = _state;
+	size_t entry_length;
+
+	entry_length = dmi_entry_length(dh);
+
+	return memory_read_from_buffer(state->buf, state->count,
+				       &state->pos, dh, entry_length);
+}
+
+static ssize_t dmi_entry_raw_read(struct file *filp,
+				  struct kobject *kobj,
+				  struct bin_attribute *bin_attr,
+				  char *buf, loff_t pos, size_t count)
+{
+	struct dmi_sysfs_entry *entry = to_entry(kobj);
+	struct dmi_read_state state = {
+		.buf = buf,
+		.pos = pos,
+		.count = count,
+	};
+
+	return find_dmi_entry(entry, dmi_entry_raw_read_helper, &state);
+}
+
+static const struct bin_attribute dmi_entry_raw_attr = {
+	.attr = {.name = "raw", .mode = 0400},
+	.read = dmi_entry_raw_read,
+};
+
+static void dmi_sysfs_entry_release(struct kobject *kobj)
+{
+	struct dmi_sysfs_entry *entry = to_entry(kobj);
+	sysfs_remove_bin_file(&entry->kobj, &dmi_entry_raw_attr);
+	spin_lock(&entry_list_lock);
+	list_del(&entry->list);
+	spin_unlock(&entry_list_lock);
+	kfree(entry);
+}
+
+static struct kobj_type dmi_sysfs_entry_ktype = {
+	.release = dmi_sysfs_entry_release,
+	.sysfs_ops = &dmi_sysfs_attr_ops,
+	.default_attrs = dmi_sysfs_entry_attrs,
+};
+
+static struct kobject *dmi_kobj;
+static struct kset *dmi_kset;
+
+/* Global count of all instances seen.  Only for setup */
+static int __initdata instance_counts[MAX_ENTRY_TYPE + 1];
+
+/* Global positional count of all entries seen.  Only for setup */
+static int __initdata position_count;
+
+static void __init dmi_sysfs_register_handle(const struct dmi_header *dh,
+					     void *_ret)
+{
+	struct dmi_sysfs_entry *entry;
+	int *ret = _ret;
+
+	/* If a previous entry saw an error, short circuit */
+	if (*ret)
+		return;
+
+	/* Allocate and register a new entry into the entries set */
+	entry = kzalloc(sizeof(*entry), GFP_KERNEL);
+	if (!entry) {
+		*ret = -ENOMEM;
+		return;
+	}
+
+	/* Set the key */
+	memcpy(&entry->dh, dh, sizeof(*dh));
+	entry->instance = instance_counts[dh->type]++;
+	entry->position = position_count++;
+
+	entry->kobj.kset = dmi_kset;
+	*ret = kobject_init_and_add(&entry->kobj, &dmi_sysfs_entry_ktype, NULL,
+				    "%d-%d", dh->type, entry->instance);
+
+	if (*ret) {
+		kfree(entry);
+		return;
+	}
+
+	/* Thread on the global list for cleanup */
+	spin_lock(&entry_list_lock);
+	list_add_tail(&entry->list, &entry_list);
+	spin_unlock(&entry_list_lock);
+
+	/* Handle specializations by type */
+	switch (dh->type) {
+	case DMI_ENTRY_SYSTEM_EVENT_LOG:
+		*ret = dmi_system_event_log(entry);
+		break;
+	default:
+		/* No specialization */
+		break;
+	}
+	if (*ret)
+		goto out_err;
+
+	/* Create the raw binary file to access the entry */
+	*ret = sysfs_create_bin_file(&entry->kobj, &dmi_entry_raw_attr);
+	if (*ret)
+		goto out_err;
+
+	return;
+out_err:
+	kobject_put(entry->child);
+	kobject_put(&entry->kobj);
+	return;
+}
+
+static void cleanup_entry_list(void)
+{
+	struct dmi_sysfs_entry *entry, *next;
+
+	/* No locks, we are on our way out */
+	list_for_each_entry_safe(entry, next, &entry_list, list) {
+		kobject_put(entry->child);
+		kobject_put(&entry->kobj);
+	}
+}
+
+static int __init dmi_sysfs_init(void)
+{
+	int error = -ENOMEM;
+	int val;
+
+	/* Set up our directory */
+	dmi_kobj = kobject_create_and_add("dmi", firmware_kobj);
+	if (!dmi_kobj)
+		goto err;
+
+	dmi_kset = kset_create_and_add("entries", NULL, dmi_kobj);
+	if (!dmi_kset)
+		goto err;
+
+	val = 0;
+	error = dmi_walk(dmi_sysfs_register_handle, &val);
+	if (error)
+		goto err;
+	if (val) {
+		error = val;
+		goto err;
+	}
+
+	pr_debug("dmi-sysfs: loaded.\n");
+
+	return 0;
+err:
+	cleanup_entry_list();
+	kset_unregister(dmi_kset);
+	kobject_put(dmi_kobj);
+	return error;
+}
+
+/* clean up everything. */
+static void __exit dmi_sysfs_exit(void)
+{
+	pr_debug("dmi-sysfs: unloading.\n");
+	cleanup_entry_list();
+	kset_unregister(dmi_kset);
+	kobject_put(dmi_kobj);
+}
+
+module_init(dmi_sysfs_init);
+module_exit(dmi_sysfs_exit);
+
+MODULE_AUTHOR("Mike Waychison <mikew@google.com>");
+MODULE_DESCRIPTION("DMI sysfs support");
+MODULE_LICENSE("GPL");
diff --git a/drivers/firmware/dmi_scan.c b/drivers/firmware/dmi_scan.c
new file mode 100644
index 00000000..153980be
--- /dev/null
+++ b/drivers/firmware/dmi_scan.c
@@ -0,0 +1,749 @@
+#include <linux/types.h>
+#include <linux/string.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/ctype.h>
+#include <linux/dmi.h>
+#include <linux/efi.h>
+#include <linux/bootmem.h>
+#include <asm/dmi.h>
+
+/*
+ * DMI stands for "Desktop Management Interface".  It is part
+ * of and an antecedent to, SMBIOS, which stands for System
+ * Management BIOS.  See further: http://www.dmtf.org/standards
+ */
+static char dmi_empty_string[] = "        ";
+
+/*
+ * Catch too early calls to dmi_check_system():
+ */
+static int dmi_initialized;
+
+static const char * __init dmi_string_nosave(const struct dmi_header *dm, u8 s)
+{
+	const u8 *bp = ((u8 *) dm) + dm->length;
+
+	if (s) {
+		s--;
+		while (s > 0 && *bp) {
+			bp += strlen(bp) + 1;
+			s--;
+		}
+
+		if (*bp != 0) {
+			size_t len = strlen(bp)+1;
+			size_t cmp_len = len > 8 ? 8 : len;
+
+			if (!memcmp(bp, dmi_empty_string, cmp_len))
+				return dmi_empty_string;
+			return bp;
+		}
+	}
+
+	return "";
+}
+
+static char * __init dmi_string(const struct dmi_header *dm, u8 s)
+{
+	const char *bp = dmi_string_nosave(dm, s);
+	char *str;
+	size_t len;
+
+	if (bp == dmi_empty_string)
+		return dmi_empty_string;
+
+	len = strlen(bp) + 1;
+	str = dmi_alloc(len);
+	if (str != NULL)
+		strcpy(str, bp);
+	else
+		printk(KERN_ERR "dmi_string: cannot allocate %Zu bytes.\n", len);
+
+	return str;
+}
+
+/*
+ *	We have to be cautious here. We have seen BIOSes with DMI pointers
+ *	pointing to completely the wrong place for example
+ */
+static void dmi_table(u8 *buf, int len, int num,
+		      void (*decode)(const struct dmi_header *, void *),
+		      void *private_data)
+{
+	u8 *data = buf;
+	int i = 0;
+
+	/*
+	 *	Stop when we see all the items the table claimed to have
+	 *	OR we run off the end of the table (also happens)
+	 */
+	while ((i < num) && (data - buf + sizeof(struct dmi_header)) <= len) {
+		const struct dmi_header *dm = (const struct dmi_header *)data;
+
+		/*
+		 *  We want to know the total length (formatted area and
+		 *  strings) before decoding to make sure we won't run off the
+		 *  table in dmi_decode or dmi_string
+		 */
+		data += dm->length;
+		while ((data - buf < len - 1) && (data[0] || data[1]))
+			data++;
+		if (data - buf < len - 1)
+			decode(dm, private_data);
+		data += 2;
+		i++;
+	}
+}
+
+static u32 dmi_base;
+static u16 dmi_len;
+static u16 dmi_num;
+
+static int __init dmi_walk_early(void (*decode)(const struct dmi_header *,
+		void *))
+{
+	u8 *buf;
+
+	buf = dmi_ioremap(dmi_base, dmi_len);
+	if (buf == NULL)
+		return -1;
+
+	dmi_table(buf, dmi_len, dmi_num, decode, NULL);
+
+	dmi_iounmap(buf, dmi_len);
+	return 0;
+}
+
+static int __init dmi_checksum(const u8 *buf)
+{
+	u8 sum = 0;
+	int a;
+
+	for (a = 0; a < 15; a++)
+		sum += buf[a];
+
+	return sum == 0;
+}
+
+static char *dmi_ident[DMI_STRING_MAX];
+static LIST_HEAD(dmi_devices);
+int dmi_available;
+
+/*
+ *	Save a DMI string
+ */
+static void __init dmi_save_ident(const struct dmi_header *dm, int slot, int string)
+{
+	const char *d = (const char*) dm;
+	char *p;
+
+	if (dmi_ident[slot])
+		return;
+
+	p = dmi_string(dm, d[string]);
+	if (p == NULL)
+		return;
+
+	dmi_ident[slot] = p;
+}
+
+static void __init dmi_save_uuid(const struct dmi_header *dm, int slot, int index)
+{
+	const u8 *d = (u8*) dm + index;
+	char *s;
+	int is_ff = 1, is_00 = 1, i;
+
+	if (dmi_ident[slot])
+		return;
+
+	for (i = 0; i < 16 && (is_ff || is_00); i++) {
+		if(d[i] != 0x00) is_ff = 0;
+		if(d[i] != 0xFF) is_00 = 0;
+	}
+
+	if (is_ff || is_00)
+		return;
+
+	s = dmi_alloc(16*2+4+1);
+	if (!s)
+		return;
+
+	sprintf(s, "%pUB", d);
+
+        dmi_ident[slot] = s;
+}
+
+static void __init dmi_save_type(const struct dmi_header *dm, int slot, int index)
+{
+	const u8 *d = (u8*) dm + index;
+	char *s;
+
+	if (dmi_ident[slot])
+		return;
+
+	s = dmi_alloc(4);
+	if (!s)
+		return;
+
+	sprintf(s, "%u", *d & 0x7F);
+	dmi_ident[slot] = s;
+}
+
+static void __init dmi_save_one_device(int type, const char *name)
+{
+	struct dmi_device *dev;
+
+	/* No duplicate device */
+	if (dmi_find_device(type, name, NULL))
+		return;
+
+	dev = dmi_alloc(sizeof(*dev) + strlen(name) + 1);
+	if (!dev) {
+		printk(KERN_ERR "dmi_save_one_device: out of memory.\n");
+		return;
+	}
+
+	dev->type = type;
+	strcpy((char *)(dev + 1), name);
+	dev->name = (char *)(dev + 1);
+	dev->device_data = NULL;
+	list_add(&dev->list, &dmi_devices);
+}
+
+static void __init dmi_save_devices(const struct dmi_header *dm)
+{
+	int i, count = (dm->length - sizeof(struct dmi_header)) / 2;
+
+	for (i = 0; i < count; i++) {
+		const char *d = (char *)(dm + 1) + (i * 2);
+
+		/* Skip disabled device */
+		if ((*d & 0x80) == 0)
+			continue;
+
+		dmi_save_one_device(*d & 0x7f, dmi_string_nosave(dm, *(d + 1)));
+	}
+}
+
+static void __init dmi_save_oem_strings_devices(const struct dmi_header *dm)
+{
+	int i, count = *(u8 *)(dm + 1);
+	struct dmi_device *dev;
+
+	for (i = 1; i <= count; i++) {
+		char *devname = dmi_string(dm, i);
+
+		if (devname == dmi_empty_string)
+			continue;
+
+		dev = dmi_alloc(sizeof(*dev));
+		if (!dev) {
+			printk(KERN_ERR
+			   "dmi_save_oem_strings_devices: out of memory.\n");
+			break;
+		}
+
+		dev->type = DMI_DEV_TYPE_OEM_STRING;
+		dev->name = devname;
+		dev->device_data = NULL;
+
+		list_add(&dev->list, &dmi_devices);
+	}
+}
+
+static void __init dmi_save_ipmi_device(const struct dmi_header *dm)
+{
+	struct dmi_device *dev;
+	void * data;
+
+	data = dmi_alloc(dm->length);
+	if (data == NULL) {
+		printk(KERN_ERR "dmi_save_ipmi_device: out of memory.\n");
+		return;
+	}
+
+	memcpy(data, dm, dm->length);
+
+	dev = dmi_alloc(sizeof(*dev));
+	if (!dev) {
+		printk(KERN_ERR "dmi_save_ipmi_device: out of memory.\n");
+		return;
+	}
+
+	dev->type = DMI_DEV_TYPE_IPMI;
+	dev->name = "IPMI controller";
+	dev->device_data = data;
+
+	list_add_tail(&dev->list, &dmi_devices);
+}
+
+static void __init dmi_save_dev_onboard(int instance, int segment, int bus,
+					int devfn, const char *name)
+{
+	struct dmi_dev_onboard *onboard_dev;
+
+	onboard_dev = dmi_alloc(sizeof(*onboard_dev) + strlen(name) + 1);
+	if (!onboard_dev) {
+		printk(KERN_ERR "dmi_save_dev_onboard: out of memory.\n");
+		return;
+	}
+	onboard_dev->instance = instance;
+	onboard_dev->segment = segment;
+	onboard_dev->bus = bus;
+	onboard_dev->devfn = devfn;
+
+	strcpy((char *)&onboard_dev[1], name);
+	onboard_dev->dev.type = DMI_DEV_TYPE_DEV_ONBOARD;
+	onboard_dev->dev.name = (char *)&onboard_dev[1];
+	onboard_dev->dev.device_data = onboard_dev;
+
+	list_add(&onboard_dev->dev.list, &dmi_devices);
+}
+
+static void __init dmi_save_extended_devices(const struct dmi_header *dm)
+{
+	const u8 *d = (u8*) dm + 5;
+
+	/* Skip disabled device */
+	if ((*d & 0x80) == 0)
+		return;
+
+	dmi_save_dev_onboard(*(d+1), *(u16 *)(d+2), *(d+4), *(d+5),
+			     dmi_string_nosave(dm, *(d-1)));
+	dmi_save_one_device(*d & 0x7f, dmi_string_nosave(dm, *(d - 1)));
+}
+
+/*
+ *	Process a DMI table entry. Right now all we care about are the BIOS
+ *	and machine entries. For 2.5 we should pull the smbus controller info
+ *	out of here.
+ */
+static void __init dmi_decode(const struct dmi_header *dm, void *dummy)
+{
+	switch(dm->type) {
+	case 0:		/* BIOS Information */
+		dmi_save_ident(dm, DMI_BIOS_VENDOR, 4);
+		dmi_save_ident(dm, DMI_BIOS_VERSION, 5);
+		dmi_save_ident(dm, DMI_BIOS_DATE, 8);
+		break;
+	case 1:		/* System Information */
+		dmi_save_ident(dm, DMI_SYS_VENDOR, 4);
+		dmi_save_ident(dm, DMI_PRODUCT_NAME, 5);
+		dmi_save_ident(dm, DMI_PRODUCT_VERSION, 6);
+		dmi_save_ident(dm, DMI_PRODUCT_SERIAL, 7);
+		dmi_save_uuid(dm, DMI_PRODUCT_UUID, 8);
+		break;
+	case 2:		/* Base Board Information */
+		dmi_save_ident(dm, DMI_BOARD_VENDOR, 4);
+		dmi_save_ident(dm, DMI_BOARD_NAME, 5);
+		dmi_save_ident(dm, DMI_BOARD_VERSION, 6);
+		dmi_save_ident(dm, DMI_BOARD_SERIAL, 7);
+		dmi_save_ident(dm, DMI_BOARD_ASSET_TAG, 8);
+		break;
+	case 3:		/* Chassis Information */
+		dmi_save_ident(dm, DMI_CHASSIS_VENDOR, 4);
+		dmi_save_type(dm, DMI_CHASSIS_TYPE, 5);
+		dmi_save_ident(dm, DMI_CHASSIS_VERSION, 6);
+		dmi_save_ident(dm, DMI_CHASSIS_SERIAL, 7);
+		dmi_save_ident(dm, DMI_CHASSIS_ASSET_TAG, 8);
+		break;
+	case 10:	/* Onboard Devices Information */
+		dmi_save_devices(dm);
+		break;
+	case 11:	/* OEM Strings */
+		dmi_save_oem_strings_devices(dm);
+		break;
+	case 38:	/* IPMI Device Information */
+		dmi_save_ipmi_device(dm);
+		break;
+	case 41:	/* Onboard Devices Extended Information */
+		dmi_save_extended_devices(dm);
+	}
+}
+
+static void __init print_filtered(const char *info)
+{
+	const char *p;
+
+	if (!info)
+		return;
+
+	for (p = info; *p; p++)
+		if (isprint(*p))
+			printk(KERN_CONT "%c", *p);
+		else
+			printk(KERN_CONT "\\x%02x", *p & 0xff);
+}
+
+static void __init dmi_dump_ids(void)
+{
+	const char *board;	/* Board Name is optional */
+
+	printk(KERN_DEBUG "DMI: ");
+	print_filtered(dmi_get_system_info(DMI_SYS_VENDOR));
+	printk(KERN_CONT " ");
+	print_filtered(dmi_get_system_info(DMI_PRODUCT_NAME));
+	board = dmi_get_system_info(DMI_BOARD_NAME);
+	if (board) {
+		printk(KERN_CONT "/");
+		print_filtered(board);
+	}
+	printk(KERN_CONT ", BIOS ");
+	print_filtered(dmi_get_system_info(DMI_BIOS_VERSION));
+	printk(KERN_CONT " ");
+	print_filtered(dmi_get_system_info(DMI_BIOS_DATE));
+	printk(KERN_CONT "\n");
+}
+
+static int __init dmi_present(const char __iomem *p)
+{
+	u8 buf[15];
+
+	memcpy_fromio(buf, p, 15);
+	if ((memcmp(buf, "_DMI_", 5) == 0) && dmi_checksum(buf)) {
+		dmi_num = (buf[13] << 8) | buf[12];
+		dmi_len = (buf[7] << 8) | buf[6];
+		dmi_base = (buf[11] << 24) | (buf[10] << 16) |
+			(buf[9] << 8) | buf[8];
+
+		/*
+		 * DMI version 0.0 means that the real version is taken from
+		 * the SMBIOS version, which we don't know at this point.
+		 */
+		if (buf[14] != 0)
+			printk(KERN_INFO "DMI %d.%d present.\n",
+			       buf[14] >> 4, buf[14] & 0xF);
+		else
+			printk(KERN_INFO "DMI present.\n");
+		if (dmi_walk_early(dmi_decode) == 0) {
+			dmi_dump_ids();
+			return 0;
+		}
+	}
+	return 1;
+}
+
+void __init dmi_scan_machine(void)
+{
+	char __iomem *p, *q;
+	int rc;
+
+	if (efi_enabled) {
+		if (efi.smbios == EFI_INVALID_TABLE_ADDR)
+			goto error;
+
+		/* This is called as a core_initcall() because it isn't
+		 * needed during early boot.  This also means we can
+		 * iounmap the space when we're done with it.
+		 */
+		p = dmi_ioremap(efi.smbios, 32);
+		if (p == NULL)
+			goto error;
+
+		rc = dmi_present(p + 0x10); /* offset of _DMI_ string */
+		dmi_iounmap(p, 32);
+		if (!rc) {
+			dmi_available = 1;
+			goto out;
+		}
+	}
+	else {
+		/*
+		 * no iounmap() for that ioremap(); it would be a no-op, but
+		 * it's so early in setup that sucker gets confused into doing
+		 * what it shouldn't if we actually call it.
+		 */
+		p = dmi_ioremap(0xF0000, 0x10000);
+		if (p == NULL)
+			goto error;
+
+		for (q = p; q < p + 0x10000; q += 16) {
+			rc = dmi_present(q);
+			if (!rc) {
+				dmi_available = 1;
+				dmi_iounmap(p, 0x10000);
+				goto out;
+			}
+		}
+		dmi_iounmap(p, 0x10000);
+	}
+ error:
+	printk(KERN_INFO "DMI not present or invalid.\n");
+ out:
+	dmi_initialized = 1;
+}
+
+/**
+ *	dmi_matches - check if dmi_system_id structure matches system DMI data
+ *	@dmi: pointer to the dmi_system_id structure to check
+ */
+static bool dmi_matches(const struct dmi_system_id *dmi)
+{
+	int i;
+
+	WARN(!dmi_initialized, KERN_ERR "dmi check: not initialized yet.\n");
+
+	for (i = 0; i < ARRAY_SIZE(dmi->matches); i++) {
+		int s = dmi->matches[i].slot;
+		if (s == DMI_NONE)
+			break;
+		if (dmi_ident[s]
+		    && strstr(dmi_ident[s], dmi->matches[i].substr))
+			continue;
+		/* No match */
+		return false;
+	}
+	return true;
+}
+
+/**
+ *	dmi_is_end_of_table - check for end-of-table marker
+ *	@dmi: pointer to the dmi_system_id structure to check
+ */
+static bool dmi_is_end_of_table(const struct dmi_system_id *dmi)
+{
+	return dmi->matches[0].slot == DMI_NONE;
+}
+
+/**
+ *	dmi_check_system - check system DMI data
+ *	@list: array of dmi_system_id structures to match against
+ *		All non-null elements of the list must match
+ *		their slot's (field index's) data (i.e., each
+ *		list string must be a substring of the specified
+ *		DMI slot's string data) to be considered a
+ *		successful match.
+ *
+ *	Walk the blacklist table running matching functions until someone
+ *	returns non zero or we hit the end. Callback function is called for
+ *	each successful match. Returns the number of matches.
+ */
+int dmi_check_system(const struct dmi_system_id *list)
+{
+	int count = 0;
+	const struct dmi_system_id *d;
+
+	for (d = list; !dmi_is_end_of_table(d); d++)
+		if (dmi_matches(d)) {
+			count++;
+			if (d->callback && d->callback(d))
+				break;
+		}
+
+	return count;
+}
+EXPORT_SYMBOL(dmi_check_system);
+
+/**
+ *	dmi_first_match - find dmi_system_id structure matching system DMI data
+ *	@list: array of dmi_system_id structures to match against
+ *		All non-null elements of the list must match
+ *		their slot's (field index's) data (i.e., each
+ *		list string must be a substring of the specified
+ *		DMI slot's string data) to be considered a
+ *		successful match.
+ *
+ *	Walk the blacklist table until the first match is found.  Return the
+ *	pointer to the matching entry or NULL if there's no match.
+ */
+const struct dmi_system_id *dmi_first_match(const struct dmi_system_id *list)
+{
+	const struct dmi_system_id *d;
+
+	for (d = list; !dmi_is_end_of_table(d); d++)
+		if (dmi_matches(d))
+			return d;
+
+	return NULL;
+}
+EXPORT_SYMBOL(dmi_first_match);
+
+/**
+ *	dmi_get_system_info - return DMI data value
+ *	@field: data index (see enum dmi_field)
+ *
+ *	Returns one DMI data value, can be used to perform
+ *	complex DMI data checks.
+ */
+const char *dmi_get_system_info(int field)
+{
+	return dmi_ident[field];
+}
+EXPORT_SYMBOL(dmi_get_system_info);
+
+/**
+ * dmi_name_in_serial - Check if string is in the DMI product serial information
+ * @str: string to check for
+ */
+int dmi_name_in_serial(const char *str)
+{
+	int f = DMI_PRODUCT_SERIAL;
+	if (dmi_ident[f] && strstr(dmi_ident[f], str))
+		return 1;
+	return 0;
+}
+
+/**
+ *	dmi_name_in_vendors - Check if string is in the DMI system or board vendor name
+ *	@str: 	Case sensitive Name
+ */
+int dmi_name_in_vendors(const char *str)
+{
+	static int fields[] = { DMI_SYS_VENDOR, DMI_BOARD_VENDOR, DMI_NONE };
+	int i;
+	for (i = 0; fields[i] != DMI_NONE; i++) {
+		int f = fields[i];
+		if (dmi_ident[f] && strstr(dmi_ident[f], str))
+			return 1;
+	}
+	return 0;
+}
+EXPORT_SYMBOL(dmi_name_in_vendors);
+
+/**
+ *	dmi_find_device - find onboard device by type/name
+ *	@type: device type or %DMI_DEV_TYPE_ANY to match all device types
+ *	@name: device name string or %NULL to match all
+ *	@from: previous device found in search, or %NULL for new search.
+ *
+ *	Iterates through the list of known onboard devices. If a device is
+ *	found with a matching @vendor and @device, a pointer to its device
+ *	structure is returned.  Otherwise, %NULL is returned.
+ *	A new search is initiated by passing %NULL as the @from argument.
+ *	If @from is not %NULL, searches continue from next device.
+ */
+const struct dmi_device * dmi_find_device(int type, const char *name,
+				    const struct dmi_device *from)
+{
+	const struct list_head *head = from ? &from->list : &dmi_devices;
+	struct list_head *d;
+
+	for(d = head->next; d != &dmi_devices; d = d->next) {
+		const struct dmi_device *dev =
+			list_entry(d, struct dmi_device, list);
+
+		if (((type == DMI_DEV_TYPE_ANY) || (dev->type == type)) &&
+		    ((name == NULL) || (strcmp(dev->name, name) == 0)))
+			return dev;
+	}
+
+	return NULL;
+}
+EXPORT_SYMBOL(dmi_find_device);
+
+/**
+ *	dmi_get_date - parse a DMI date
+ *	@field:	data index (see enum dmi_field)
+ *	@yearp: optional out parameter for the year
+ *	@monthp: optional out parameter for the month
+ *	@dayp: optional out parameter for the day
+ *
+ *	The date field is assumed to be in the form resembling
+ *	[mm[/dd]]/yy[yy] and the result is stored in the out
+ *	parameters any or all of which can be omitted.
+ *
+ *	If the field doesn't exist, all out parameters are set to zero
+ *	and false is returned.  Otherwise, true is returned with any
+ *	invalid part of date set to zero.
+ *
+ *	On return, year, month and day are guaranteed to be in the
+ *	range of [0,9999], [0,12] and [0,31] respectively.
+ */
+bool dmi_get_date(int field, int *yearp, int *monthp, int *dayp)
+{
+	int year = 0, month = 0, day = 0;
+	bool exists;
+	const char *s, *y;
+	char *e;
+
+	s = dmi_get_system_info(field);
+	exists = s;
+	if (!exists)
+		goto out;
+
+	/*
+	 * Determine year first.  We assume the date string resembles
+	 * mm/dd/yy[yy] but the original code extracted only the year
+	 * from the end.  Keep the behavior in the spirit of no
+	 * surprises.
+	 */
+	y = strrchr(s, '/');
+	if (!y)
+		goto out;
+
+	y++;
+	year = simple_strtoul(y, &e, 10);
+	if (y != e && year < 100) {	/* 2-digit year */
+		year += 1900;
+		if (year < 1996)	/* no dates < spec 1.0 */
+			year += 100;
+	}
+	if (year > 9999)		/* year should fit in %04d */
+		year = 0;
+
+	/* parse the mm and dd */
+	month = simple_strtoul(s, &e, 10);
+	if (s == e || *e != '/' || !month || month > 12) {
+		month = 0;
+		goto out;
+	}
+
+	s = e + 1;
+	day = simple_strtoul(s, &e, 10);
+	if (s == y || s == e || *e != '/' || day > 31)
+		day = 0;
+out:
+	if (yearp)
+		*yearp = year;
+	if (monthp)
+		*monthp = month;
+	if (dayp)
+		*dayp = day;
+	return exists;
+}
+EXPORT_SYMBOL(dmi_get_date);
+
+/**
+ *	dmi_walk - Walk the DMI table and get called back for every record
+ *	@decode: Callback function
+ *	@private_data: Private data to be passed to the callback function
+ *
+ *	Returns -1 when the DMI table can't be reached, 0 on success.
+ */
+int dmi_walk(void (*decode)(const struct dmi_header *, void *),
+	     void *private_data)
+{
+	u8 *buf;
+
+	if (!dmi_available)
+		return -1;
+
+	buf = ioremap(dmi_base, dmi_len);
+	if (buf == NULL)
+		return -1;
+
+	dmi_table(buf, dmi_len, dmi_num, decode, private_data);
+
+	iounmap(buf);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(dmi_walk);
+
+/**
+ * dmi_match - compare a string to the dmi field (if exists)
+ * @f: DMI field identifier
+ * @str: string to compare the DMI field to
+ *
+ * Returns true if the requested field equals to the str (including NULL).
+ */
+bool dmi_match(enum dmi_field f, const char *str)
+{
+	const char *info = dmi_get_system_info(f);
+
+	if (info == NULL || str == NULL)
+		return info == str;
+
+	return !strcmp(info, str);
+}
+EXPORT_SYMBOL_GPL(dmi_match);
diff --git a/drivers/firmware/edd.c b/drivers/firmware/edd.c
new file mode 100644
index 00000000..e2295766
--- /dev/null
+++ b/drivers/firmware/edd.c
@@ -0,0 +1,801 @@
+/*
+ * linux/drivers/firmware/edd.c
+ *  Copyright (C) 2002, 2003, 2004 Dell Inc.
+ *  by Matt Domsch <Matt_Domsch@dell.com>
+ *  disk signature by Matt Domsch, Andrew Wilks, and Sandeep K. Shandilya
+ *  legacy CHS by Patrick J. LoPresti <patl@users.sourceforge.net>
+ *
+ * BIOS Enhanced Disk Drive Services (EDD)
+ * conformant to T13 Committee www.t13.org
+ *   projects 1572D, 1484D, 1386D, 1226DT
+ *
+ * This code takes information provided by BIOS EDD calls
+ * fn41 - Check Extensions Present and
+ * fn48 - Get Device Parameters with EDD extensions
+ * made in setup.S, copied to safe structures in setup.c,
+ * and presents it in sysfs.
+ *
+ * Please see http://linux.dell.com/edd/results.html for
+ * the list of BIOSs which have been reported to implement EDD.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License v2.0 as published by
+ * the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/stat.h>
+#include <linux/err.h>
+#include <linux/ctype.h>
+#include <linux/slab.h>
+#include <linux/limits.h>
+#include <linux/device.h>
+#include <linux/pci.h>
+#include <linux/blkdev.h>
+#include <linux/edd.h>
+
+#define EDD_VERSION "0.16"
+#define EDD_DATE    "2004-Jun-25"
+
+MODULE_AUTHOR("Matt Domsch <Matt_Domsch@Dell.com>");
+MODULE_DESCRIPTION("sysfs interface to BIOS EDD information");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(EDD_VERSION);
+
+#define left (PAGE_SIZE - (p - buf) - 1)
+
+struct edd_device {
+	unsigned int index;
+	unsigned int mbr_signature;
+	struct edd_info *info;
+	struct kobject kobj;
+};
+
+struct edd_attribute {
+	struct attribute attr;
+	ssize_t(*show) (struct edd_device * edev, char *buf);
+	int (*test) (struct edd_device * edev);
+};
+
+/* forward declarations */
+static int edd_dev_is_type(struct edd_device *edev, const char *type);
+static struct pci_dev *edd_get_pci_dev(struct edd_device *edev);
+
+static struct edd_device *edd_devices[EDD_MBR_SIG_MAX];
+
+#define EDD_DEVICE_ATTR(_name,_mode,_show,_test) \
+struct edd_attribute edd_attr_##_name = { 	\
+	.attr = {.name = __stringify(_name), .mode = _mode },	\
+	.show	= _show,				\
+	.test	= _test,				\
+};
+
+static int
+edd_has_mbr_signature(struct edd_device *edev)
+{
+	return edev->index < min_t(unsigned char, edd.mbr_signature_nr, EDD_MBR_SIG_MAX);
+}
+
+static int
+edd_has_edd_info(struct edd_device *edev)
+{
+	return edev->index < min_t(unsigned char, edd.edd_info_nr, EDDMAXNR);
+}
+
+static inline struct edd_info *
+edd_dev_get_info(struct edd_device *edev)
+{
+	return edev->info;
+}
+
+static inline void
+edd_dev_set_info(struct edd_device *edev, int i)
+{
+	edev->index = i;
+	if (edd_has_mbr_signature(edev))
+		edev->mbr_signature = edd.mbr_signature[i];
+	if (edd_has_edd_info(edev))
+		edev->info = &edd.edd_info[i];
+}
+
+#define to_edd_attr(_attr) container_of(_attr,struct edd_attribute,attr)
+#define to_edd_device(obj) container_of(obj,struct edd_device,kobj)
+
+static ssize_t
+edd_attr_show(struct kobject * kobj, struct attribute *attr, char *buf)
+{
+	struct edd_device *dev = to_edd_device(kobj);
+	struct edd_attribute *edd_attr = to_edd_attr(attr);
+	ssize_t ret = -EIO;
+
+	if (edd_attr->show)
+		ret = edd_attr->show(dev, buf);
+	return ret;
+}
+
+static const struct sysfs_ops edd_attr_ops = {
+	.show = edd_attr_show,
+};
+
+static ssize_t
+edd_show_host_bus(struct edd_device *edev, char *buf)
+{
+	struct edd_info *info;
+	char *p = buf;
+	int i;
+
+	if (!edev)
+		return -EINVAL;
+	info = edd_dev_get_info(edev);
+	if (!info || !buf)
+		return -EINVAL;
+
+	for (i = 0; i < 4; i++) {
+		if (isprint(info->params.host_bus_type[i])) {
+			p += scnprintf(p, left, "%c", info->params.host_bus_type[i]);
+		} else {
+			p += scnprintf(p, left, " ");
+		}
+	}
+
+	if (!strncmp(info->params.host_bus_type, "ISA", 3)) {
+		p += scnprintf(p, left, "\tbase_address: %x\n",
+			     info->params.interface_path.isa.base_address);
+	} else if (!strncmp(info->params.host_bus_type, "PCIX", 4) ||
+		   !strncmp(info->params.host_bus_type, "PCI", 3) ||
+		   !strncmp(info->params.host_bus_type, "XPRS", 4)) {
+		p += scnprintf(p, left,
+			     "\t%02x:%02x.%d  channel: %u\n",
+			     info->params.interface_path.pci.bus,
+			     info->params.interface_path.pci.slot,
+			     info->params.interface_path.pci.function,
+			     info->params.interface_path.pci.channel);
+	} else if (!strncmp(info->params.host_bus_type, "IBND", 4) ||
+		   !strncmp(info->params.host_bus_type, "HTPT", 4)) {
+		p += scnprintf(p, left,
+			     "\tTBD: %llx\n",
+			     info->params.interface_path.ibnd.reserved);
+
+	} else {
+		p += scnprintf(p, left, "\tunknown: %llx\n",
+			     info->params.interface_path.unknown.reserved);
+	}
+	return (p - buf);
+}
+
+static ssize_t
+edd_show_interface(struct edd_device *edev, char *buf)
+{
+	struct edd_info *info;
+	char *p = buf;
+	int i;
+
+	if (!edev)
+		return -EINVAL;
+	info = edd_dev_get_info(edev);
+	if (!info || !buf)
+		return -EINVAL;
+
+	for (i = 0; i < 8; i++) {
+		if (isprint(info->params.interface_type[i])) {
+			p += scnprintf(p, left, "%c", info->params.interface_type[i]);
+		} else {
+			p += scnprintf(p, left, " ");
+		}
+	}
+	if (!strncmp(info->params.interface_type, "ATAPI", 5)) {
+		p += scnprintf(p, left, "\tdevice: %u  lun: %u\n",
+			     info->params.device_path.atapi.device,
+			     info->params.device_path.atapi.lun);
+	} else if (!strncmp(info->params.interface_type, "ATA", 3)) {
+		p += scnprintf(p, left, "\tdevice: %u\n",
+			     info->params.device_path.ata.device);
+	} else if (!strncmp(info->params.interface_type, "SCSI", 4)) {
+		p += scnprintf(p, left, "\tid: %u  lun: %llu\n",
+			     info->params.device_path.scsi.id,
+			     info->params.device_path.scsi.lun);
+	} else if (!strncmp(info->params.interface_type, "USB", 3)) {
+		p += scnprintf(p, left, "\tserial_number: %llx\n",
+			     info->params.device_path.usb.serial_number);
+	} else if (!strncmp(info->params.interface_type, "1394", 4)) {
+		p += scnprintf(p, left, "\teui: %llx\n",
+			     info->params.device_path.i1394.eui);
+	} else if (!strncmp(info->params.interface_type, "FIBRE", 5)) {
+		p += scnprintf(p, left, "\twwid: %llx lun: %llx\n",
+			     info->params.device_path.fibre.wwid,
+			     info->params.device_path.fibre.lun);
+	} else if (!strncmp(info->params.interface_type, "I2O", 3)) {
+		p += scnprintf(p, left, "\tidentity_tag: %llx\n",
+			     info->params.device_path.i2o.identity_tag);
+	} else if (!strncmp(info->params.interface_type, "RAID", 4)) {
+		p += scnprintf(p, left, "\tidentity_tag: %x\n",
+			     info->params.device_path.raid.array_number);
+	} else if (!strncmp(info->params.interface_type, "SATA", 4)) {
+		p += scnprintf(p, left, "\tdevice: %u\n",
+			     info->params.device_path.sata.device);
+	} else {
+		p += scnprintf(p, left, "\tunknown: %llx %llx\n",
+			     info->params.device_path.unknown.reserved1,
+			     info->params.device_path.unknown.reserved2);
+	}
+
+	return (p - buf);
+}
+
+/**
+ * edd_show_raw_data() - copies raw data to buffer for userspace to parse
+ * @edev: target edd_device
+ * @buf: output buffer
+ *
+ * Returns: number of bytes written, or -EINVAL on failure
+ */
+static ssize_t
+edd_show_raw_data(struct edd_device *edev, char *buf)
+{
+	struct edd_info *info;
+	ssize_t len = sizeof (info->params);
+	if (!edev)
+		return -EINVAL;
+	info = edd_dev_get_info(edev);
+	if (!info || !buf)
+		return -EINVAL;
+
+	if (!(info->params.key == 0xBEDD || info->params.key == 0xDDBE))
+		len = info->params.length;
+
+	/* In case of buggy BIOSs */
+	if (len > (sizeof(info->params)))
+		len = sizeof(info->params);
+
+	memcpy(buf, &info->params, len);
+	return len;
+}
+
+static ssize_t
+edd_show_version(struct edd_device *edev, char *buf)
+{
+	struct edd_info *info;
+	char *p = buf;
+	if (!edev)
+		return -EINVAL;
+	info = edd_dev_get_info(edev);
+	if (!info || !buf)
+		return -EINVAL;
+
+	p += scnprintf(p, left, "0x%02x\n", info->version);
+	return (p - buf);
+}
+
+static ssize_t
+edd_show_mbr_signature(struct edd_device *edev, char *buf)
+{
+	char *p = buf;
+	p += scnprintf(p, left, "0x%08x\n", edev->mbr_signature);
+	return (p - buf);
+}
+
+static ssize_t
+edd_show_extensions(struct edd_device *edev, char *buf)
+{
+	struct edd_info *info;
+	char *p = buf;
+	if (!edev)
+		return -EINVAL;
+	info = edd_dev_get_info(edev);
+	if (!info || !buf)
+		return -EINVAL;
+
+	if (info->interface_support & EDD_EXT_FIXED_DISK_ACCESS) {
+		p += scnprintf(p, left, "Fixed disk access\n");
+	}
+	if (info->interface_support & EDD_EXT_DEVICE_LOCKING_AND_EJECTING) {
+		p += scnprintf(p, left, "Device locking and ejecting\n");
+	}
+	if (info->interface_support & EDD_EXT_ENHANCED_DISK_DRIVE_SUPPORT) {
+		p += scnprintf(p, left, "Enhanced Disk Drive support\n");
+	}
+	if (info->interface_support & EDD_EXT_64BIT_EXTENSIONS) {
+		p += scnprintf(p, left, "64-bit extensions\n");
+	}
+	return (p - buf);
+}
+
+static ssize_t
+edd_show_info_flags(struct edd_device *edev, char *buf)
+{
+	struct edd_info *info;
+	char *p = buf;
+	if (!edev)
+		return -EINVAL;
+	info = edd_dev_get_info(edev);
+	if (!info || !buf)
+		return -EINVAL;
+
+	if (info->params.info_flags & EDD_INFO_DMA_BOUNDARY_ERROR_TRANSPARENT)
+		p += scnprintf(p, left, "DMA boundary error transparent\n");
+	if (info->params.info_flags & EDD_INFO_GEOMETRY_VALID)
+		p += scnprintf(p, left, "geometry valid\n");
+	if (info->params.info_flags & EDD_INFO_REMOVABLE)
+		p += scnprintf(p, left, "removable\n");
+	if (info->params.info_flags & EDD_INFO_WRITE_VERIFY)
+		p += scnprintf(p, left, "write verify\n");
+	if (info->params.info_flags & EDD_INFO_MEDIA_CHANGE_NOTIFICATION)
+		p += scnprintf(p, left, "media change notification\n");
+	if (info->params.info_flags & EDD_INFO_LOCKABLE)
+		p += scnprintf(p, left, "lockable\n");
+	if (info->params.info_flags & EDD_INFO_NO_MEDIA_PRESENT)
+		p += scnprintf(p, left, "no media present\n");
+	if (info->params.info_flags & EDD_INFO_USE_INT13_FN50)
+		p += scnprintf(p, left, "use int13 fn50\n");
+	return (p - buf);
+}
+
+static ssize_t
+edd_show_legacy_max_cylinder(struct edd_device *edev, char *buf)
+{
+	struct edd_info *info;
+	char *p = buf;
+	if (!edev)
+		return -EINVAL;
+	info = edd_dev_get_info(edev);
+	if (!info || !buf)
+		return -EINVAL;
+
+	p += snprintf(p, left, "%u\n", info->legacy_max_cylinder);
+	return (p - buf);
+}
+
+static ssize_t
+edd_show_legacy_max_head(struct edd_device *edev, char *buf)
+{
+	struct edd_info *info;
+	char *p = buf;
+	if (!edev)
+		return -EINVAL;
+	info = edd_dev_get_info(edev);
+	if (!info || !buf)
+		return -EINVAL;
+
+	p += snprintf(p, left, "%u\n", info->legacy_max_head);
+	return (p - buf);
+}
+
+static ssize_t
+edd_show_legacy_sectors_per_track(struct edd_device *edev, char *buf)
+{
+	struct edd_info *info;
+	char *p = buf;
+	if (!edev)
+		return -EINVAL;
+	info = edd_dev_get_info(edev);
+	if (!info || !buf)
+		return -EINVAL;
+
+	p += snprintf(p, left, "%u\n", info->legacy_sectors_per_track);
+	return (p - buf);
+}
+
+static ssize_t
+edd_show_default_cylinders(struct edd_device *edev, char *buf)
+{
+	struct edd_info *info;
+	char *p = buf;
+	if (!edev)
+		return -EINVAL;
+	info = edd_dev_get_info(edev);
+	if (!info || !buf)
+		return -EINVAL;
+
+	p += scnprintf(p, left, "%u\n", info->params.num_default_cylinders);
+	return (p - buf);
+}
+
+static ssize_t
+edd_show_default_heads(struct edd_device *edev, char *buf)
+{
+	struct edd_info *info;
+	char *p = buf;
+	if (!edev)
+		return -EINVAL;
+	info = edd_dev_get_info(edev);
+	if (!info || !buf)
+		return -EINVAL;
+
+	p += scnprintf(p, left, "%u\n", info->params.num_default_heads);
+	return (p - buf);
+}
+
+static ssize_t
+edd_show_default_sectors_per_track(struct edd_device *edev, char *buf)
+{
+	struct edd_info *info;
+	char *p = buf;
+	if (!edev)
+		return -EINVAL;
+	info = edd_dev_get_info(edev);
+	if (!info || !buf)
+		return -EINVAL;
+
+	p += scnprintf(p, left, "%u\n", info->params.sectors_per_track);
+	return (p - buf);
+}
+
+static ssize_t
+edd_show_sectors(struct edd_device *edev, char *buf)
+{
+	struct edd_info *info;
+	char *p = buf;
+	if (!edev)
+		return -EINVAL;
+	info = edd_dev_get_info(edev);
+	if (!info || !buf)
+		return -EINVAL;
+
+	p += scnprintf(p, left, "%llu\n", info->params.number_of_sectors);
+	return (p - buf);
+}
+
+
+/*
+ * Some device instances may not have all the above attributes,
+ * or the attribute values may be meaningless (i.e. if
+ * the device is < EDD 3.0, it won't have host_bus and interface
+ * information), so don't bother making files for them.  Likewise
+ * if the default_{cylinders,heads,sectors_per_track} values
+ * are zero, the BIOS doesn't provide sane values, don't bother
+ * creating files for them either.
+ */
+
+static int
+edd_has_legacy_max_cylinder(struct edd_device *edev)
+{
+	struct edd_info *info;
+	if (!edev)
+		return 0;
+	info = edd_dev_get_info(edev);
+	if (!info)
+		return 0;
+	return info->legacy_max_cylinder > 0;
+}
+
+static int
+edd_has_legacy_max_head(struct edd_device *edev)
+{
+	struct edd_info *info;
+	if (!edev)
+		return 0;
+	info = edd_dev_get_info(edev);
+	if (!info)
+		return 0;
+	return info->legacy_max_head > 0;
+}
+
+static int
+edd_has_legacy_sectors_per_track(struct edd_device *edev)
+{
+	struct edd_info *info;
+	if (!edev)
+		return 0;
+	info = edd_dev_get_info(edev);
+	if (!info)
+		return 0;
+	return info->legacy_sectors_per_track > 0;
+}
+
+static int
+edd_has_default_cylinders(struct edd_device *edev)
+{
+	struct edd_info *info;
+	if (!edev)
+		return 0;
+	info = edd_dev_get_info(edev);
+	if (!info)
+		return 0;
+	return info->params.num_default_cylinders > 0;
+}
+
+static int
+edd_has_default_heads(struct edd_device *edev)
+{
+	struct edd_info *info;
+	if (!edev)
+		return 0;
+	info = edd_dev_get_info(edev);
+	if (!info)
+		return 0;
+	return info->params.num_default_heads > 0;
+}
+
+static int
+edd_has_default_sectors_per_track(struct edd_device *edev)
+{
+	struct edd_info *info;
+	if (!edev)
+		return 0;
+	info = edd_dev_get_info(edev);
+	if (!info)
+		return 0;
+	return info->params.sectors_per_track > 0;
+}
+
+static int
+edd_has_edd30(struct edd_device *edev)
+{
+	struct edd_info *info;
+	int i;
+	u8 csum = 0;
+
+	if (!edev)
+		return 0;
+	info = edd_dev_get_info(edev);
+	if (!info)
+		return 0;
+
+	if (!(info->params.key == 0xBEDD || info->params.key == 0xDDBE)) {
+		return 0;
+	}
+
+
+	/* We support only T13 spec */
+	if (info->params.device_path_info_length != 44)
+		return 0;
+
+	for (i = 30; i < info->params.device_path_info_length + 30; i++)
+		csum += *(((u8 *)&info->params) + i);
+
+	if (csum)
+		return 0;
+
+	return 1;
+}
+
+
+static EDD_DEVICE_ATTR(raw_data, 0444, edd_show_raw_data, edd_has_edd_info);
+static EDD_DEVICE_ATTR(version, 0444, edd_show_version, edd_has_edd_info);
+static EDD_DEVICE_ATTR(extensions, 0444, edd_show_extensions, edd_has_edd_info);
+static EDD_DEVICE_ATTR(info_flags, 0444, edd_show_info_flags, edd_has_edd_info);
+static EDD_DEVICE_ATTR(sectors, 0444, edd_show_sectors, edd_has_edd_info);
+static EDD_DEVICE_ATTR(legacy_max_cylinder, 0444,
+                       edd_show_legacy_max_cylinder,
+		       edd_has_legacy_max_cylinder);
+static EDD_DEVICE_ATTR(legacy_max_head, 0444, edd_show_legacy_max_head,
+		       edd_has_legacy_max_head);
+static EDD_DEVICE_ATTR(legacy_sectors_per_track, 0444,
+                       edd_show_legacy_sectors_per_track,
+		       edd_has_legacy_sectors_per_track);
+static EDD_DEVICE_ATTR(default_cylinders, 0444, edd_show_default_cylinders,
+		       edd_has_default_cylinders);
+static EDD_DEVICE_ATTR(default_heads, 0444, edd_show_default_heads,
+		       edd_has_default_heads);
+static EDD_DEVICE_ATTR(default_sectors_per_track, 0444,
+		       edd_show_default_sectors_per_track,
+		       edd_has_default_sectors_per_track);
+static EDD_DEVICE_ATTR(interface, 0444, edd_show_interface, edd_has_edd30);
+static EDD_DEVICE_ATTR(host_bus, 0444, edd_show_host_bus, edd_has_edd30);
+static EDD_DEVICE_ATTR(mbr_signature, 0444, edd_show_mbr_signature, edd_has_mbr_signature);
+
+
+/* These are default attributes that are added for every edd
+ * device discovered.  There are none.
+ */
+static struct attribute * def_attrs[] = {
+	NULL,
+};
+
+/* These attributes are conditional and only added for some devices. */
+static struct edd_attribute * edd_attrs[] = {
+	&edd_attr_raw_data,
+	&edd_attr_version,
+	&edd_attr_extensions,
+	&edd_attr_info_flags,
+	&edd_attr_sectors,
+	&edd_attr_legacy_max_cylinder,
+	&edd_attr_legacy_max_head,
+	&edd_attr_legacy_sectors_per_track,
+	&edd_attr_default_cylinders,
+	&edd_attr_default_heads,
+	&edd_attr_default_sectors_per_track,
+	&edd_attr_interface,
+	&edd_attr_host_bus,
+	&edd_attr_mbr_signature,
+	NULL,
+};
+
+/**
+ *	edd_release - free edd structure
+ *	@kobj:	kobject of edd structure
+ *
+ *	This is called when the refcount of the edd structure
+ *	reaches 0. This should happen right after we unregister,
+ *	but just in case, we use the release callback anyway.
+ */
+
+static void edd_release(struct kobject * kobj)
+{
+	struct edd_device * dev = to_edd_device(kobj);
+	kfree(dev);
+}
+
+static struct kobj_type edd_ktype = {
+	.release	= edd_release,
+	.sysfs_ops	= &edd_attr_ops,
+	.default_attrs	= def_attrs,
+};
+
+static struct kset *edd_kset;
+
+
+/**
+ * edd_dev_is_type() - is this EDD device a 'type' device?
+ * @edev: target edd_device
+ * @type: a host bus or interface identifier string per the EDD spec
+ *
+ * Returns 1 (TRUE) if it is a 'type' device, 0 otherwise.
+ */
+static int
+edd_dev_is_type(struct edd_device *edev, const char *type)
+{
+	struct edd_info *info;
+	if (!edev)
+		return 0;
+	info = edd_dev_get_info(edev);
+
+	if (type && info) {
+		if (!strncmp(info->params.host_bus_type, type, strlen(type)) ||
+		    !strncmp(info->params.interface_type, type, strlen(type)))
+			return 1;
+	}
+	return 0;
+}
+
+/**
+ * edd_get_pci_dev() - finds pci_dev that matches edev
+ * @edev: edd_device
+ *
+ * Returns pci_dev if found, or NULL
+ */
+static struct pci_dev *
+edd_get_pci_dev(struct edd_device *edev)
+{
+	struct edd_info *info = edd_dev_get_info(edev);
+
+	if (edd_dev_is_type(edev, "PCI") || edd_dev_is_type(edev, "XPRS")) {
+		return pci_get_bus_and_slot(info->params.interface_path.pci.bus,
+				     PCI_DEVFN(info->params.interface_path.pci.slot,
+					       info->params.interface_path.pci.
+					       function));
+	}
+	return NULL;
+}
+
+static int
+edd_create_symlink_to_pcidev(struct edd_device *edev)
+{
+
+	struct pci_dev *pci_dev = edd_get_pci_dev(edev);
+	int ret;
+	if (!pci_dev)
+		return 1;
+	ret = sysfs_create_link(&edev->kobj,&pci_dev->dev.kobj,"pci_dev");
+	pci_dev_put(pci_dev);
+	return ret;
+}
+
+static inline void
+edd_device_unregister(struct edd_device *edev)
+{
+	kobject_put(&edev->kobj);
+}
+
+static void edd_populate_dir(struct edd_device * edev)
+{
+	struct edd_attribute * attr;
+	int error = 0;
+	int i;
+
+	for (i = 0; (attr = edd_attrs[i]) && !error; i++) {
+		if (!attr->test ||
+		    (attr->test && attr->test(edev)))
+			error = sysfs_create_file(&edev->kobj,&attr->attr);
+	}
+
+	if (!error) {
+		edd_create_symlink_to_pcidev(edev);
+	}
+}
+
+static int
+edd_device_register(struct edd_device *edev, int i)
+{
+	int error;
+
+	if (!edev)
+		return 1;
+	edd_dev_set_info(edev, i);
+	edev->kobj.kset = edd_kset;
+	error = kobject_init_and_add(&edev->kobj, &edd_ktype, NULL,
+				     "int13_dev%02x", 0x80 + i);
+	if (!error) {
+		edd_populate_dir(edev);
+		kobject_uevent(&edev->kobj, KOBJ_ADD);
+	}
+	return error;
+}
+
+static inline int edd_num_devices(void)
+{
+	return max_t(unsigned char,
+		     min_t(unsigned char, EDD_MBR_SIG_MAX, edd.mbr_signature_nr),
+		     min_t(unsigned char, EDDMAXNR, edd.edd_info_nr));
+}
+
+/**
+ * edd_init() - creates sysfs tree of EDD data
+ */
+static int __init
+edd_init(void)
+{
+	int i;
+	int rc=0;
+	struct edd_device *edev;
+
+	printk(KERN_INFO "BIOS EDD facility v%s %s, %d devices found\n",
+	       EDD_VERSION, EDD_DATE, edd_num_devices());
+
+	if (!edd_num_devices()) {
+		printk(KERN_INFO "EDD information not available.\n");
+		return -ENODEV;
+	}
+
+	edd_kset = kset_create_and_add("edd", NULL, firmware_kobj);
+	if (!edd_kset)
+		return -ENOMEM;
+
+	for (i = 0; i < edd_num_devices(); i++) {
+		edev = kzalloc(sizeof (*edev), GFP_KERNEL);
+		if (!edev) {
+			rc = -ENOMEM;
+			goto out;
+		}
+
+		rc = edd_device_register(edev, i);
+		if (rc) {
+			kfree(edev);
+			goto out;
+		}
+		edd_devices[i] = edev;
+	}
+
+	return 0;
+
+out:
+	while (--i >= 0)
+		edd_device_unregister(edd_devices[i]);
+	kset_unregister(edd_kset);
+	return rc;
+}
+
+static void __exit
+edd_exit(void)
+{
+	int i;
+	struct edd_device *edev;
+
+	for (i = 0; i < edd_num_devices(); i++) {
+		if ((edev = edd_devices[i]))
+			edd_device_unregister(edev);
+	}
+	kset_unregister(edd_kset);
+}
+
+late_initcall(edd_init);
+module_exit(edd_exit);
diff --git a/drivers/firmware/efivars.c b/drivers/firmware/efivars.c
new file mode 100644
index 00000000..47408e80
--- /dev/null
+++ b/drivers/firmware/efivars.c
@@ -0,0 +1,1262 @@
+/*
+ * EFI Variables - efivars.c
+ *
+ * Copyright (C) 2001,2003,2004 Dell <Matt_Domsch@dell.com>
+ * Copyright (C) 2004 Intel Corporation <matthew.e.tolentino@intel.com>
+ *
+ * This code takes all variables accessible from EFI runtime and
+ *  exports them via sysfs
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ * Changelog:
+ *
+ *  17 May 2004 - Matt Domsch <Matt_Domsch@dell.com>
+ *   remove check for efi_enabled in exit
+ *   add MODULE_VERSION
+ *
+ *  26 Apr 2004 - Matt Domsch <Matt_Domsch@dell.com>
+ *   minor bug fixes
+ *
+ *  21 Apr 2004 - Matt Tolentino <matthew.e.tolentino@intel.com)
+ *   converted driver to export variable information via sysfs
+ *   and moved to drivers/firmware directory
+ *   bumped revision number to v0.07 to reflect conversion & move
+ *
+ *  10 Dec 2002 - Matt Domsch <Matt_Domsch@dell.com>
+ *   fix locking per Peter Chubb's findings
+ *
+ *  25 Mar 2002 - Matt Domsch <Matt_Domsch@dell.com>
+ *   move uuid_unparse() to include/asm-ia64/efi.h:efi_guid_unparse()
+ *
+ *  12 Feb 2002 - Matt Domsch <Matt_Domsch@dell.com>
+ *   use list_for_each_safe when deleting vars.
+ *   remove ifdef CONFIG_SMP around include <linux/smp.h>
+ *   v0.04 release to linux-ia64@linuxia64.org
+ *
+ *  20 April 2001 - Matt Domsch <Matt_Domsch@dell.com>
+ *   Moved vars from /proc/efi to /proc/efi/vars, and made
+ *   efi.c own the /proc/efi directory.
+ *   v0.03 release to linux-ia64@linuxia64.org
+ *
+ *  26 March 2001 - Matt Domsch <Matt_Domsch@dell.com>
+ *   At the request of Stephane, moved ownership of /proc/efi
+ *   to efi.c, and now efivars lives under /proc/efi/vars.
+ *
+ *  12 March 2001 - Matt Domsch <Matt_Domsch@dell.com>
+ *   Feedback received from Stephane Eranian incorporated.
+ *   efivar_write() checks copy_from_user() return value.
+ *   efivar_read/write() returns proper errno.
+ *   v0.02 release to linux-ia64@linuxia64.org
+ *
+ *  26 February 2001 - Matt Domsch <Matt_Domsch@dell.com>
+ *   v0.01 release to linux-ia64@linuxia64.org
+ */
+
+#include <linux/capability.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/smp.h>
+#include <linux/efi.h>
+#include <linux/sysfs.h>
+#include <linux/kobject.h>
+#include <linux/device.h>
+#include <linux/slab.h>
+#include <linux/pstore.h>
+
+#include <asm/uaccess.h>
+
+#define EFIVARS_VERSION "0.08"
+#define EFIVARS_DATE "2004-May-17"
+
+MODULE_AUTHOR("Matt Domsch <Matt_Domsch@Dell.com>");
+MODULE_DESCRIPTION("sysfs interface to EFI Variables");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(EFIVARS_VERSION);
+
+#define DUMP_NAME_LEN 52
+
+/*
+ * The maximum size of VariableName + Data = 1024
+ * Therefore, it's reasonable to save that much
+ * space in each part of the structure,
+ * and we use a page for reading/writing.
+ */
+
+struct efi_variable {
+	efi_char16_t  VariableName[1024/sizeof(efi_char16_t)];
+	efi_guid_t    VendorGuid;
+	unsigned long DataSize;
+	__u8          Data[1024];
+	efi_status_t  Status;
+	__u32         Attributes;
+} __attribute__((packed));
+
+
+struct efivar_entry {
+	struct efivars *efivars;
+	struct efi_variable var;
+	struct list_head list;
+	struct kobject kobj;
+};
+
+struct efivar_attribute {
+	struct attribute attr;
+	ssize_t (*show) (struct efivar_entry *entry, char *buf);
+	ssize_t (*store)(struct efivar_entry *entry, const char *buf, size_t count);
+};
+
+#define PSTORE_EFI_ATTRIBUTES \
+	(EFI_VARIABLE_NON_VOLATILE | \
+	 EFI_VARIABLE_BOOTSERVICE_ACCESS | \
+	 EFI_VARIABLE_RUNTIME_ACCESS)
+
+#define EFIVAR_ATTR(_name, _mode, _show, _store) \
+struct efivar_attribute efivar_attr_##_name = { \
+	.attr = {.name = __stringify(_name), .mode = _mode}, \
+	.show = _show, \
+	.store = _store, \
+};
+
+#define to_efivar_attr(_attr) container_of(_attr, struct efivar_attribute, attr)
+#define to_efivar_entry(obj)  container_of(obj, struct efivar_entry, kobj)
+
+/*
+ * Prototype for sysfs creation function
+ */
+static int
+efivar_create_sysfs_entry(struct efivars *efivars,
+			  unsigned long variable_name_size,
+			  efi_char16_t *variable_name,
+			  efi_guid_t *vendor_guid);
+
+/* Return the number of unicode characters in data */
+static unsigned long
+utf16_strnlen(efi_char16_t *s, size_t maxlength)
+{
+	unsigned long length = 0;
+
+	while (*s++ != 0 && length < maxlength)
+		length++;
+	return length;
+}
+
+static inline unsigned long
+utf16_strlen(efi_char16_t *s)
+{
+	return utf16_strnlen(s, ~0UL);
+}
+
+/*
+ * Return the number of bytes is the length of this string
+ * Note: this is NOT the same as the number of unicode characters
+ */
+static inline unsigned long
+utf16_strsize(efi_char16_t *data, unsigned long maxlength)
+{
+	return utf16_strnlen(data, maxlength/sizeof(efi_char16_t)) * sizeof(efi_char16_t);
+}
+
+static inline int
+utf16_strncmp(const efi_char16_t *a, const efi_char16_t *b, size_t len)
+{
+	while (1) {
+		if (len == 0)
+			return 0;
+		if (*a < *b)
+			return -1;
+		if (*a > *b)
+			return 1;
+		if (*a == 0) /* implies *b == 0 */
+			return 0;
+		a++;
+		b++;
+		len--;
+	}
+}
+
+static bool
+validate_device_path(struct efi_variable *var, int match, u8 *buffer,
+		     unsigned long len)
+{
+	struct efi_generic_dev_path *node;
+	int offset = 0;
+
+	node = (struct efi_generic_dev_path *)buffer;
+
+	if (len < sizeof(*node))
+		return false;
+
+	while (offset <= len - sizeof(*node) &&
+	       node->length >= sizeof(*node) &&
+		node->length <= len - offset) {
+		offset += node->length;
+
+		if ((node->type == EFI_DEV_END_PATH ||
+		     node->type == EFI_DEV_END_PATH2) &&
+		    node->sub_type == EFI_DEV_END_ENTIRE)
+			return true;
+
+		node = (struct efi_generic_dev_path *)(buffer + offset);
+	}
+
+	/*
+	 * If we're here then either node->length pointed past the end
+	 * of the buffer or we reached the end of the buffer without
+	 * finding a device path end node.
+	 */
+	return false;
+}
+
+static bool
+validate_boot_order(struct efi_variable *var, int match, u8 *buffer,
+		    unsigned long len)
+{
+	/* An array of 16-bit integers */
+	if ((len % 2) != 0)
+		return false;
+
+	return true;
+}
+
+static bool
+validate_load_option(struct efi_variable *var, int match, u8 *buffer,
+		     unsigned long len)
+{
+	u16 filepathlength;
+	int i, desclength = 0, namelen;
+
+	namelen = utf16_strnlen(var->VariableName, sizeof(var->VariableName));
+
+	/* Either "Boot" or "Driver" followed by four digits of hex */
+	for (i = match; i < match+4; i++) {
+		if (var->VariableName[i] > 127 ||
+		    hex_to_bin(var->VariableName[i] & 0xff) < 0)
+			return true;
+	}
+
+	/* Reject it if there's 4 digits of hex and then further content */
+	if (namelen > match + 4)
+		return false;
+
+	/* A valid entry must be at least 8 bytes */
+	if (len < 8)
+		return false;
+
+	filepathlength = buffer[4] | buffer[5] << 8;
+
+	/*
+	 * There's no stored length for the description, so it has to be
+	 * found by hand
+	 */
+	desclength = utf16_strsize((efi_char16_t *)(buffer + 6), len - 6) + 2;
+
+	/* Each boot entry must have a descriptor */
+	if (!desclength)
+		return false;
+
+	/*
+	 * If the sum of the length of the description, the claimed filepath
+	 * length and the original header are greater than the length of the
+	 * variable, it's malformed
+	 */
+	if ((desclength + filepathlength + 6) > len)
+		return false;
+
+	/*
+	 * And, finally, check the filepath
+	 */
+	return validate_device_path(var, match, buffer + desclength + 6,
+				    filepathlength);
+}
+
+static bool
+validate_uint16(struct efi_variable *var, int match, u8 *buffer,
+		unsigned long len)
+{
+	/* A single 16-bit integer */
+	if (len != 2)
+		return false;
+
+	return true;
+}
+
+static bool
+validate_ascii_string(struct efi_variable *var, int match, u8 *buffer,
+		      unsigned long len)
+{
+	int i;
+
+	for (i = 0; i < len; i++) {
+		if (buffer[i] > 127)
+			return false;
+
+		if (buffer[i] == 0)
+			return true;
+	}
+
+	return false;
+}
+
+struct variable_validate {
+	char *name;
+	bool (*validate)(struct efi_variable *var, int match, u8 *data,
+			 unsigned long len);
+};
+
+static const struct variable_validate variable_validate[] = {
+	{ "BootNext", validate_uint16 },
+	{ "BootOrder", validate_boot_order },
+	{ "DriverOrder", validate_boot_order },
+	{ "Boot*", validate_load_option },
+	{ "Driver*", validate_load_option },
+	{ "ConIn", validate_device_path },
+	{ "ConInDev", validate_device_path },
+	{ "ConOut", validate_device_path },
+	{ "ConOutDev", validate_device_path },
+	{ "ErrOut", validate_device_path },
+	{ "ErrOutDev", validate_device_path },
+	{ "Timeout", validate_uint16 },
+	{ "Lang", validate_ascii_string },
+	{ "PlatformLang", validate_ascii_string },
+	{ "", NULL },
+};
+
+static bool
+validate_var(struct efi_variable *var, u8 *data, unsigned long len)
+{
+	int i;
+	u16 *unicode_name = var->VariableName;
+
+	for (i = 0; variable_validate[i].validate != NULL; i++) {
+		const char *name = variable_validate[i].name;
+		int match;
+
+		for (match = 0; ; match++) {
+			char c = name[match];
+			u16 u = unicode_name[match];
+
+			/* All special variables are plain ascii */
+			if (u > 127)
+				return true;
+
+			/* Wildcard in the matching name means we've matched */
+			if (c == '*')
+				return variable_validate[i].validate(var,
+							     match, data, len);
+
+			/* Case sensitive match */
+			if (c != u)
+				break;
+
+			/* Reached the end of the string while matching */
+			if (!c)
+				return variable_validate[i].validate(var,
+							     match, data, len);
+		}
+	}
+
+	return true;
+}
+
+static efi_status_t
+get_var_data_locked(struct efivars *efivars, struct efi_variable *var)
+{
+	efi_status_t status;
+
+	var->DataSize = 1024;
+	status = efivars->ops->get_variable(var->VariableName,
+					    &var->VendorGuid,
+					    &var->Attributes,
+					    &var->DataSize,
+					    var->Data);
+	return status;
+}
+
+static efi_status_t
+get_var_data(struct efivars *efivars, struct efi_variable *var)
+{
+	efi_status_t status;
+
+	spin_lock(&efivars->lock);
+	status = get_var_data_locked(efivars, var);
+	spin_unlock(&efivars->lock);
+
+	if (status != EFI_SUCCESS) {
+		printk(KERN_WARNING "efivars: get_variable() failed 0x%lx!\n",
+			status);
+	}
+	return status;
+}
+
+static ssize_t
+efivar_guid_read(struct efivar_entry *entry, char *buf)
+{
+	struct efi_variable *var = &entry->var;
+	char *str = buf;
+
+	if (!entry || !buf)
+		return 0;
+
+	efi_guid_unparse(&var->VendorGuid, str);
+	str += strlen(str);
+	str += sprintf(str, "\n");
+
+	return str - buf;
+}
+
+static ssize_t
+efivar_attr_read(struct efivar_entry *entry, char *buf)
+{
+	struct efi_variable *var = &entry->var;
+	char *str = buf;
+	efi_status_t status;
+
+	if (!entry || !buf)
+		return -EINVAL;
+
+	status = get_var_data(entry->efivars, var);
+	if (status != EFI_SUCCESS)
+		return -EIO;
+
+	if (var->Attributes & 0x1)
+		str += sprintf(str, "EFI_VARIABLE_NON_VOLATILE\n");
+	if (var->Attributes & 0x2)
+		str += sprintf(str, "EFI_VARIABLE_BOOTSERVICE_ACCESS\n");
+	if (var->Attributes & 0x4)
+		str += sprintf(str, "EFI_VARIABLE_RUNTIME_ACCESS\n");
+	return str - buf;
+}
+
+static ssize_t
+efivar_size_read(struct efivar_entry *entry, char *buf)
+{
+	struct efi_variable *var = &entry->var;
+	char *str = buf;
+	efi_status_t status;
+
+	if (!entry || !buf)
+		return -EINVAL;
+
+	status = get_var_data(entry->efivars, var);
+	if (status != EFI_SUCCESS)
+		return -EIO;
+
+	str += sprintf(str, "0x%lx\n", var->DataSize);
+	return str - buf;
+}
+
+static ssize_t
+efivar_data_read(struct efivar_entry *entry, char *buf)
+{
+	struct efi_variable *var = &entry->var;
+	efi_status_t status;
+
+	if (!entry || !buf)
+		return -EINVAL;
+
+	status = get_var_data(entry->efivars, var);
+	if (status != EFI_SUCCESS)
+		return -EIO;
+
+	memcpy(buf, var->Data, var->DataSize);
+	return var->DataSize;
+}
+/*
+ * We allow each variable to be edited via rewriting the
+ * entire efi variable structure.
+ */
+static ssize_t
+efivar_store_raw(struct efivar_entry *entry, const char *buf, size_t count)
+{
+	struct efi_variable *new_var, *var = &entry->var;
+	struct efivars *efivars = entry->efivars;
+	efi_status_t status = EFI_NOT_FOUND;
+
+	if (count != sizeof(struct efi_variable))
+		return -EINVAL;
+
+	new_var = (struct efi_variable *)buf;
+	/*
+	 * If only updating the variable data, then the name
+	 * and guid should remain the same
+	 */
+	if (memcmp(new_var->VariableName, var->VariableName, sizeof(var->VariableName)) ||
+		efi_guidcmp(new_var->VendorGuid, var->VendorGuid)) {
+		printk(KERN_ERR "efivars: Cannot edit the wrong variable!\n");
+		return -EINVAL;
+	}
+
+	if ((new_var->DataSize <= 0) || (new_var->Attributes == 0)){
+		printk(KERN_ERR "efivars: DataSize & Attributes must be valid!\n");
+		return -EINVAL;
+	}
+
+	if ((new_var->Attributes & ~EFI_VARIABLE_MASK) != 0 ||
+	    validate_var(new_var, new_var->Data, new_var->DataSize) == false) {
+		printk(KERN_ERR "efivars: Malformed variable content\n");
+		return -EINVAL;
+	}
+
+	spin_lock(&efivars->lock);
+	status = efivars->ops->set_variable(new_var->VariableName,
+					    &new_var->VendorGuid,
+					    new_var->Attributes,
+					    new_var->DataSize,
+					    new_var->Data);
+
+	spin_unlock(&efivars->lock);
+
+	if (status != EFI_SUCCESS) {
+		printk(KERN_WARNING "efivars: set_variable() failed: status=%lx\n",
+			status);
+		return -EIO;
+	}
+
+	memcpy(&entry->var, new_var, count);
+	return count;
+}
+
+static ssize_t
+efivar_show_raw(struct efivar_entry *entry, char *buf)
+{
+	struct efi_variable *var = &entry->var;
+	efi_status_t status;
+
+	if (!entry || !buf)
+		return 0;
+
+	status = get_var_data(entry->efivars, var);
+	if (status != EFI_SUCCESS)
+		return -EIO;
+
+	memcpy(buf, var, sizeof(*var));
+	return sizeof(*var);
+}
+
+/*
+ * Generic read/write functions that call the specific functions of
+ * the attributes...
+ */
+static ssize_t efivar_attr_show(struct kobject *kobj, struct attribute *attr,
+				char *buf)
+{
+	struct efivar_entry *var = to_efivar_entry(kobj);
+	struct efivar_attribute *efivar_attr = to_efivar_attr(attr);
+	ssize_t ret = -EIO;
+
+	if (!capable(CAP_SYS_ADMIN))
+		return -EACCES;
+
+	if (efivar_attr->show) {
+		ret = efivar_attr->show(var, buf);
+	}
+	return ret;
+}
+
+static ssize_t efivar_attr_store(struct kobject *kobj, struct attribute *attr,
+				const char *buf, size_t count)
+{
+	struct efivar_entry *var = to_efivar_entry(kobj);
+	struct efivar_attribute *efivar_attr = to_efivar_attr(attr);
+	ssize_t ret = -EIO;
+
+	if (!capable(CAP_SYS_ADMIN))
+		return -EACCES;
+
+	if (efivar_attr->store)
+		ret = efivar_attr->store(var, buf, count);
+
+	return ret;
+}
+
+static const struct sysfs_ops efivar_attr_ops = {
+	.show = efivar_attr_show,
+	.store = efivar_attr_store,
+};
+
+static void efivar_release(struct kobject *kobj)
+{
+	struct efivar_entry *var = container_of(kobj, struct efivar_entry, kobj);
+	kfree(var);
+}
+
+static EFIVAR_ATTR(guid, 0400, efivar_guid_read, NULL);
+static EFIVAR_ATTR(attributes, 0400, efivar_attr_read, NULL);
+static EFIVAR_ATTR(size, 0400, efivar_size_read, NULL);
+static EFIVAR_ATTR(data, 0400, efivar_data_read, NULL);
+static EFIVAR_ATTR(raw_var, 0600, efivar_show_raw, efivar_store_raw);
+
+static struct attribute *def_attrs[] = {
+	&efivar_attr_guid.attr,
+	&efivar_attr_size.attr,
+	&efivar_attr_attributes.attr,
+	&efivar_attr_data.attr,
+	&efivar_attr_raw_var.attr,
+	NULL,
+};
+
+static struct kobj_type efivar_ktype = {
+	.release = efivar_release,
+	.sysfs_ops = &efivar_attr_ops,
+	.default_attrs = def_attrs,
+};
+
+static struct pstore_info efi_pstore_info;
+
+static inline void
+efivar_unregister(struct efivar_entry *var)
+{
+	kobject_put(&var->kobj);
+}
+
+#ifdef CONFIG_PSTORE
+
+static int efi_pstore_open(struct pstore_info *psi)
+{
+	struct efivars *efivars = psi->data;
+
+	spin_lock(&efivars->lock);
+	efivars->walk_entry = list_first_entry(&efivars->list,
+					       struct efivar_entry, list);
+	return 0;
+}
+
+static int efi_pstore_close(struct pstore_info *psi)
+{
+	struct efivars *efivars = psi->data;
+
+	spin_unlock(&efivars->lock);
+	return 0;
+}
+
+static ssize_t efi_pstore_read(u64 *id, enum pstore_type_id *type,
+			       struct timespec *timespec,
+			       char **buf, struct pstore_info *psi)
+{
+	efi_guid_t vendor = LINUX_EFI_CRASH_GUID;
+	struct efivars *efivars = psi->data;
+	char name[DUMP_NAME_LEN];
+	int i;
+	unsigned int part, size;
+	unsigned long time;
+
+	while (&efivars->walk_entry->list != &efivars->list) {
+		if (!efi_guidcmp(efivars->walk_entry->var.VendorGuid,
+				 vendor)) {
+			for (i = 0; i < DUMP_NAME_LEN; i++) {
+				name[i] = efivars->walk_entry->var.VariableName[i];
+			}
+			if (sscanf(name, "dump-type%u-%u-%lu", type, &part, &time) == 3) {
+				*id = part;
+				timespec->tv_sec = time;
+				timespec->tv_nsec = 0;
+				get_var_data_locked(efivars, &efivars->walk_entry->var);
+				size = efivars->walk_entry->var.DataSize;
+				*buf = kmalloc(size, GFP_KERNEL);
+				if (*buf == NULL)
+					return -ENOMEM;
+				memcpy(*buf, efivars->walk_entry->var.Data,
+				       size);
+				efivars->walk_entry = list_entry(efivars->walk_entry->list.next,
+					           struct efivar_entry, list);
+				return size;
+			}
+		}
+		efivars->walk_entry = list_entry(efivars->walk_entry->list.next,
+						 struct efivar_entry, list);
+	}
+	return 0;
+}
+
+static int efi_pstore_write(enum pstore_type_id type,
+		enum kmsg_dump_reason reason, u64 *id,
+		unsigned int part, size_t size, struct pstore_info *psi)
+{
+	char name[DUMP_NAME_LEN];
+	char stub_name[DUMP_NAME_LEN];
+	efi_char16_t efi_name[DUMP_NAME_LEN];
+	efi_guid_t vendor = LINUX_EFI_CRASH_GUID;
+	struct efivars *efivars = psi->data;
+	struct efivar_entry *entry, *found = NULL;
+	int i, ret = 0;
+
+	sprintf(stub_name, "dump-type%u-%u-", type, part);
+	sprintf(name, "%s%lu", stub_name, get_seconds());
+
+	spin_lock(&efivars->lock);
+
+	for (i = 0; i < DUMP_NAME_LEN; i++)
+		efi_name[i] = stub_name[i];
+
+	/*
+	 * Clean up any entries with the same name
+	 */
+
+	list_for_each_entry(entry, &efivars->list, list) {
+		get_var_data_locked(efivars, &entry->var);
+
+		if (efi_guidcmp(entry->var.VendorGuid, vendor))
+			continue;
+		if (utf16_strncmp(entry->var.VariableName, efi_name,
+				  utf16_strlen(efi_name)))
+			continue;
+		/* Needs to be a prefix */
+		if (entry->var.VariableName[utf16_strlen(efi_name)] == 0)
+			continue;
+
+		/* found */
+		found = entry;
+		efivars->ops->set_variable(entry->var.VariableName,
+					   &entry->var.VendorGuid,
+					   PSTORE_EFI_ATTRIBUTES,
+					   0, NULL);
+	}
+
+	if (found)
+		list_del(&found->list);
+
+	for (i = 0; i < DUMP_NAME_LEN; i++)
+		efi_name[i] = name[i];
+
+	efivars->ops->set_variable(efi_name, &vendor, PSTORE_EFI_ATTRIBUTES,
+				   size, psi->buf);
+
+	spin_unlock(&efivars->lock);
+
+	if (found)
+		efivar_unregister(found);
+
+	if (size)
+		ret = efivar_create_sysfs_entry(efivars,
+					  utf16_strsize(efi_name,
+							DUMP_NAME_LEN * 2),
+					  efi_name, &vendor);
+
+	*id = part;
+	return ret;
+};
+
+static int efi_pstore_erase(enum pstore_type_id type, u64 id,
+			    struct pstore_info *psi)
+{
+	efi_pstore_write(type, 0, &id, (unsigned int)id, 0, psi);
+
+	return 0;
+}
+#else
+static int efi_pstore_open(struct pstore_info *psi)
+{
+	return 0;
+}
+
+static int efi_pstore_close(struct pstore_info *psi)
+{
+	return 0;
+}
+
+static ssize_t efi_pstore_read(u64 *id, enum pstore_type_id *type,
+			       struct timespec *timespec,
+			       char **buf, struct pstore_info *psi)
+{
+	return -1;
+}
+
+static int efi_pstore_write(enum pstore_type_id type,
+		enum kmsg_dump_reason reason, u64 *id,
+		unsigned int part, size_t size, struct pstore_info *psi)
+{
+	return 0;
+}
+
+static int efi_pstore_erase(enum pstore_type_id type, u64 id,
+			    struct pstore_info *psi)
+{
+	return 0;
+}
+#endif
+
+static struct pstore_info efi_pstore_info = {
+	.owner		= THIS_MODULE,
+	.name		= "efi",
+	.open		= efi_pstore_open,
+	.close		= efi_pstore_close,
+	.read		= efi_pstore_read,
+	.write		= efi_pstore_write,
+	.erase		= efi_pstore_erase,
+};
+
+static ssize_t efivar_create(struct file *filp, struct kobject *kobj,
+			     struct bin_attribute *bin_attr,
+			     char *buf, loff_t pos, size_t count)
+{
+	struct efi_variable *new_var = (struct efi_variable *)buf;
+	struct efivars *efivars = bin_attr->private;
+	struct efivar_entry *search_efivar, *n;
+	unsigned long strsize1, strsize2;
+	efi_status_t status = EFI_NOT_FOUND;
+	int found = 0;
+
+	if (!capable(CAP_SYS_ADMIN))
+		return -EACCES;
+
+	if ((new_var->Attributes & ~EFI_VARIABLE_MASK) != 0 ||
+	    validate_var(new_var, new_var->Data, new_var->DataSize) == false) {
+		printk(KERN_ERR "efivars: Malformed variable content\n");
+		return -EINVAL;
+	}
+
+	spin_lock(&efivars->lock);
+
+	/*
+	 * Does this variable already exist?
+	 */
+	list_for_each_entry_safe(search_efivar, n, &efivars->list, list) {
+		strsize1 = utf16_strsize(search_efivar->var.VariableName, 1024);
+		strsize2 = utf16_strsize(new_var->VariableName, 1024);
+		if (strsize1 == strsize2 &&
+			!memcmp(&(search_efivar->var.VariableName),
+				new_var->VariableName, strsize1) &&
+			!efi_guidcmp(search_efivar->var.VendorGuid,
+				new_var->VendorGuid)) {
+			found = 1;
+			break;
+		}
+	}
+	if (found) {
+		spin_unlock(&efivars->lock);
+		return -EINVAL;
+	}
+
+	/* now *really* create the variable via EFI */
+	status = efivars->ops->set_variable(new_var->VariableName,
+					    &new_var->VendorGuid,
+					    new_var->Attributes,
+					    new_var->DataSize,
+					    new_var->Data);
+
+	if (status != EFI_SUCCESS) {
+		printk(KERN_WARNING "efivars: set_variable() failed: status=%lx\n",
+			status);
+		spin_unlock(&efivars->lock);
+		return -EIO;
+	}
+	spin_unlock(&efivars->lock);
+
+	/* Create the entry in sysfs.  Locking is not required here */
+	status = efivar_create_sysfs_entry(efivars,
+					   utf16_strsize(new_var->VariableName,
+							 1024),
+					   new_var->VariableName,
+					   &new_var->VendorGuid);
+	if (status) {
+		printk(KERN_WARNING "efivars: variable created, but sysfs entry wasn't.\n");
+	}
+	return count;
+}
+
+static ssize_t efivar_delete(struct file *filp, struct kobject *kobj,
+			     struct bin_attribute *bin_attr,
+			     char *buf, loff_t pos, size_t count)
+{
+	struct efi_variable *del_var = (struct efi_variable *)buf;
+	struct efivars *efivars = bin_attr->private;
+	struct efivar_entry *search_efivar, *n;
+	unsigned long strsize1, strsize2;
+	efi_status_t status = EFI_NOT_FOUND;
+	int found = 0;
+
+	if (!capable(CAP_SYS_ADMIN))
+		return -EACCES;
+
+	spin_lock(&efivars->lock);
+
+	/*
+	 * Does this variable already exist?
+	 */
+	list_for_each_entry_safe(search_efivar, n, &efivars->list, list) {
+		strsize1 = utf16_strsize(search_efivar->var.VariableName, 1024);
+		strsize2 = utf16_strsize(del_var->VariableName, 1024);
+		if (strsize1 == strsize2 &&
+			!memcmp(&(search_efivar->var.VariableName),
+				del_var->VariableName, strsize1) &&
+			!efi_guidcmp(search_efivar->var.VendorGuid,
+				del_var->VendorGuid)) {
+			found = 1;
+			break;
+		}
+	}
+	if (!found) {
+		spin_unlock(&efivars->lock);
+		return -EINVAL;
+	}
+	/* force the Attributes/DataSize to 0 to ensure deletion */
+	del_var->Attributes = 0;
+	del_var->DataSize = 0;
+
+	status = efivars->ops->set_variable(del_var->VariableName,
+					    &del_var->VendorGuid,
+					    del_var->Attributes,
+					    del_var->DataSize,
+					    del_var->Data);
+
+	if (status != EFI_SUCCESS) {
+		printk(KERN_WARNING "efivars: set_variable() failed: status=%lx\n",
+			status);
+		spin_unlock(&efivars->lock);
+		return -EIO;
+	}
+	list_del(&search_efivar->list);
+	/* We need to release this lock before unregistering. */
+	spin_unlock(&efivars->lock);
+	efivar_unregister(search_efivar);
+
+	/* It's dead Jim.... */
+	return count;
+}
+
+/*
+ * Let's not leave out systab information that snuck into
+ * the efivars driver
+ */
+static ssize_t systab_show(struct kobject *kobj,
+			   struct kobj_attribute *attr, char *buf)
+{
+	char *str = buf;
+
+	if (!kobj || !buf)
+		return -EINVAL;
+
+	if (efi.mps != EFI_INVALID_TABLE_ADDR)
+		str += sprintf(str, "MPS=0x%lx\n", efi.mps);
+	if (efi.acpi20 != EFI_INVALID_TABLE_ADDR)
+		str += sprintf(str, "ACPI20=0x%lx\n", efi.acpi20);
+	if (efi.acpi != EFI_INVALID_TABLE_ADDR)
+		str += sprintf(str, "ACPI=0x%lx\n", efi.acpi);
+	if (efi.smbios != EFI_INVALID_TABLE_ADDR)
+		str += sprintf(str, "SMBIOS=0x%lx\n", efi.smbios);
+	if (efi.hcdp != EFI_INVALID_TABLE_ADDR)
+		str += sprintf(str, "HCDP=0x%lx\n", efi.hcdp);
+	if (efi.boot_info != EFI_INVALID_TABLE_ADDR)
+		str += sprintf(str, "BOOTINFO=0x%lx\n", efi.boot_info);
+	if (efi.uga != EFI_INVALID_TABLE_ADDR)
+		str += sprintf(str, "UGA=0x%lx\n", efi.uga);
+
+	return str - buf;
+}
+
+static struct kobj_attribute efi_attr_systab =
+			__ATTR(systab, 0400, systab_show, NULL);
+
+static struct attribute *efi_subsys_attrs[] = {
+	&efi_attr_systab.attr,
+	NULL,	/* maybe more in the future? */
+};
+
+static struct attribute_group efi_subsys_attr_group = {
+	.attrs = efi_subsys_attrs,
+};
+
+static struct kobject *efi_kobj;
+
+/*
+ * efivar_create_sysfs_entry()
+ * Requires:
+ *    variable_name_size = number of bytes required to hold
+ *                         variable_name (not counting the NULL
+ *                         character at the end.
+ *    efivars->lock is not held on entry or exit.
+ * Returns 1 on failure, 0 on success
+ */
+static int
+efivar_create_sysfs_entry(struct efivars *efivars,
+			  unsigned long variable_name_size,
+			  efi_char16_t *variable_name,
+			  efi_guid_t *vendor_guid)
+{
+	int i, short_name_size = variable_name_size / sizeof(efi_char16_t) + 38;
+	char *short_name;
+	struct efivar_entry *new_efivar;
+
+	short_name = kzalloc(short_name_size + 1, GFP_KERNEL);
+	new_efivar = kzalloc(sizeof(struct efivar_entry), GFP_KERNEL);
+
+	if (!short_name || !new_efivar)  {
+		kfree(short_name);
+		kfree(new_efivar);
+		return 1;
+	}
+
+	new_efivar->efivars = efivars;
+	memcpy(new_efivar->var.VariableName, variable_name,
+		variable_name_size);
+	memcpy(&(new_efivar->var.VendorGuid), vendor_guid, sizeof(efi_guid_t));
+
+	/* Convert Unicode to normal chars (assume top bits are 0),
+	   ala UTF-8 */
+	for (i=0; i < (int)(variable_name_size / sizeof(efi_char16_t)); i++) {
+		short_name[i] = variable_name[i] & 0xFF;
+	}
+	/* This is ugly, but necessary to separate one vendor's
+	   private variables from another's.         */
+
+	*(short_name + strlen(short_name)) = '-';
+	efi_guid_unparse(vendor_guid, short_name + strlen(short_name));
+
+	new_efivar->kobj.kset = efivars->kset;
+	i = kobject_init_and_add(&new_efivar->kobj, &efivar_ktype, NULL,
+				 "%s", short_name);
+	if (i) {
+		kfree(short_name);
+		kfree(new_efivar);
+		return 1;
+	}
+
+	kobject_uevent(&new_efivar->kobj, KOBJ_ADD);
+	kfree(short_name);
+	short_name = NULL;
+
+	spin_lock(&efivars->lock);
+	list_add(&new_efivar->list, &efivars->list);
+	spin_unlock(&efivars->lock);
+
+	return 0;
+}
+
+static int
+create_efivars_bin_attributes(struct efivars *efivars)
+{
+	struct bin_attribute *attr;
+	int error;
+
+	/* new_var */
+	attr = kzalloc(sizeof(*attr), GFP_KERNEL);
+	if (!attr)
+		return -ENOMEM;
+
+	attr->attr.name = "new_var";
+	attr->attr.mode = 0200;
+	attr->write = efivar_create;
+	attr->private = efivars;
+	efivars->new_var = attr;
+
+	/* del_var */
+	attr = kzalloc(sizeof(*attr), GFP_KERNEL);
+	if (!attr) {
+		error = -ENOMEM;
+		goto out_free;
+	}
+	attr->attr.name = "del_var";
+	attr->attr.mode = 0200;
+	attr->write = efivar_delete;
+	attr->private = efivars;
+	efivars->del_var = attr;
+
+	sysfs_bin_attr_init(efivars->new_var);
+	sysfs_bin_attr_init(efivars->del_var);
+
+	/* Register */
+	error = sysfs_create_bin_file(&efivars->kset->kobj,
+				      efivars->new_var);
+	if (error) {
+		printk(KERN_ERR "efivars: unable to create new_var sysfs file"
+			" due to error %d\n", error);
+		goto out_free;
+	}
+	error = sysfs_create_bin_file(&efivars->kset->kobj,
+				      efivars->del_var);
+	if (error) {
+		printk(KERN_ERR "efivars: unable to create del_var sysfs file"
+			" due to error %d\n", error);
+		sysfs_remove_bin_file(&efivars->kset->kobj,
+				      efivars->new_var);
+		goto out_free;
+	}
+
+	return 0;
+out_free:
+	kfree(efivars->del_var);
+	efivars->del_var = NULL;
+	kfree(efivars->new_var);
+	efivars->new_var = NULL;
+	return error;
+}
+
+void unregister_efivars(struct efivars *efivars)
+{
+	struct efivar_entry *entry, *n;
+
+	list_for_each_entry_safe(entry, n, &efivars->list, list) {
+		spin_lock(&efivars->lock);
+		list_del(&entry->list);
+		spin_unlock(&efivars->lock);
+		efivar_unregister(entry);
+	}
+	if (efivars->new_var)
+		sysfs_remove_bin_file(&efivars->kset->kobj, efivars->new_var);
+	if (efivars->del_var)
+		sysfs_remove_bin_file(&efivars->kset->kobj, efivars->del_var);
+	kfree(efivars->new_var);
+	kfree(efivars->del_var);
+	kset_unregister(efivars->kset);
+}
+EXPORT_SYMBOL_GPL(unregister_efivars);
+
+int register_efivars(struct efivars *efivars,
+		     const struct efivar_operations *ops,
+		     struct kobject *parent_kobj)
+{
+	efi_status_t status = EFI_NOT_FOUND;
+	efi_guid_t vendor_guid;
+	efi_char16_t *variable_name;
+	unsigned long variable_name_size = 1024;
+	int error = 0;
+
+	variable_name = kzalloc(variable_name_size, GFP_KERNEL);
+	if (!variable_name) {
+		printk(KERN_ERR "efivars: Memory allocation failed.\n");
+		return -ENOMEM;
+	}
+
+	spin_lock_init(&efivars->lock);
+	INIT_LIST_HEAD(&efivars->list);
+	efivars->ops = ops;
+
+	efivars->kset = kset_create_and_add("vars", NULL, parent_kobj);
+	if (!efivars->kset) {
+		printk(KERN_ERR "efivars: Subsystem registration failed.\n");
+		error = -ENOMEM;
+		goto out;
+	}
+
+	/*
+	 * Per EFI spec, the maximum storage allocated for both
+	 * the variable name and variable data is 1024 bytes.
+	 */
+
+	do {
+		variable_name_size = 1024;
+
+		status = ops->get_next_variable(&variable_name_size,
+						variable_name,
+						&vendor_guid);
+		switch (status) {
+		case EFI_SUCCESS:
+			efivar_create_sysfs_entry(efivars,
+						  variable_name_size,
+						  variable_name,
+						  &vendor_guid);
+			break;
+		case EFI_NOT_FOUND:
+			break;
+		default:
+			printk(KERN_WARNING "efivars: get_next_variable: status=%lx\n",
+				status);
+			status = EFI_NOT_FOUND;
+			break;
+		}
+	} while (status != EFI_NOT_FOUND);
+
+	error = create_efivars_bin_attributes(efivars);
+	if (error)
+		unregister_efivars(efivars);
+
+	efivars->efi_pstore_info = efi_pstore_info;
+
+	efivars->efi_pstore_info.buf = kmalloc(4096, GFP_KERNEL);
+	if (efivars->efi_pstore_info.buf) {
+		efivars->efi_pstore_info.bufsize = 1024;
+		efivars->efi_pstore_info.data = efivars;
+		spin_lock_init(&efivars->efi_pstore_info.buf_lock);
+		pstore_register(&efivars->efi_pstore_info);
+	}
+
+out:
+	kfree(variable_name);
+
+	return error;
+}
+EXPORT_SYMBOL_GPL(register_efivars);
+
+static struct efivars __efivars;
+static struct efivar_operations ops;
+
+/*
+ * For now we register the efi subsystem with the firmware subsystem
+ * and the vars subsystem with the efi subsystem.  In the future, it
+ * might make sense to split off the efi subsystem into its own
+ * driver, but for now only efivars will register with it, so just
+ * include it here.
+ */
+
+static int __init
+efivars_init(void)
+{
+	int error = 0;
+
+	printk(KERN_INFO "EFI Variables Facility v%s %s\n", EFIVARS_VERSION,
+	       EFIVARS_DATE);
+
+	if (!efi_enabled)
+		return 0;
+
+	/* For now we'll register the efi directory at /sys/firmware/efi */
+	efi_kobj = kobject_create_and_add("efi", firmware_kobj);
+	if (!efi_kobj) {
+		printk(KERN_ERR "efivars: Firmware registration failed.\n");
+		return -ENOMEM;
+	}
+
+	ops.get_variable = efi.get_variable;
+	ops.set_variable = efi.set_variable;
+	ops.get_next_variable = efi.get_next_variable;
+	error = register_efivars(&__efivars, &ops, efi_kobj);
+	if (error)
+		goto err_put;
+
+	/* Don't forget the systab entry */
+	error = sysfs_create_group(efi_kobj, &efi_subsys_attr_group);
+	if (error) {
+		printk(KERN_ERR
+		       "efivars: Sysfs attribute export failed with error %d.\n",
+		       error);
+		goto err_unregister;
+	}
+
+	return 0;
+
+err_unregister:
+	unregister_efivars(&__efivars);
+err_put:
+	kobject_put(efi_kobj);
+	return error;
+}
+
+static void __exit
+efivars_exit(void)
+{
+	if (efi_enabled) {
+		unregister_efivars(&__efivars);
+		kobject_put(efi_kobj);
+	}
+}
+
+module_init(efivars_init);
+module_exit(efivars_exit);
+
diff --git a/drivers/firmware/google/Kconfig b/drivers/firmware/google/Kconfig
new file mode 100644
index 00000000..2f21b0bf
--- /dev/null
+++ b/drivers/firmware/google/Kconfig
@@ -0,0 +1,32 @@
+config GOOGLE_FIRMWARE
+	bool "Google Firmware Drivers"
+	depends on X86
+	default n
+	help
+	  These firmware drivers are used by Google's servers.  They are
+	  only useful if you are working directly on one of their
+	  proprietary servers.  If in doubt, say "N".
+
+menu "Google Firmware Drivers"
+	depends on GOOGLE_FIRMWARE
+
+config GOOGLE_SMI
+	tristate "SMI interface for Google platforms"
+	depends on ACPI && DMI
+	select EFI
+	select EFI_VARS
+	help
+	  Say Y here if you want to enable SMI callbacks for Google
+	  platforms.  This provides an interface for writing to and
+	  clearing the EFI event log and reading and writing NVRAM
+	  variables.
+
+config GOOGLE_MEMCONSOLE
+	tristate "Firmware Memory Console"
+	depends on DMI
+	help
+	  This option enables the kernel to search for a firmware log in
+	  the EBDA on Google servers.  If found, this log is exported to
+	  userland in the file /sys/firmware/log.
+
+endmenu
diff --git a/drivers/firmware/google/Makefile b/drivers/firmware/google/Makefile
new file mode 100644
index 00000000..54a294e3
--- /dev/null
+++ b/drivers/firmware/google/Makefile
@@ -0,0 +1,3 @@
+
+obj-$(CONFIG_GOOGLE_SMI)		+= gsmi.o
+obj-$(CONFIG_GOOGLE_MEMCONSOLE)		+= memconsole.o
diff --git a/drivers/firmware/google/gsmi.c b/drivers/firmware/google/gsmi.c
new file mode 100644
index 00000000..91ddf0f7
--- /dev/null
+++ b/drivers/firmware/google/gsmi.c
@@ -0,0 +1,949 @@
+/*
+ * Copyright 2010 Google Inc. All Rights Reserved.
+ * Author: dlaurie@google.com (Duncan Laurie)
+ *
+ * Re-worked to expose sysfs APIs by mikew@google.com (Mike Waychison)
+ *
+ * EFI SMI interface for Google platforms
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/spinlock.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmapool.h>
+#include <linux/fs.h>
+#include <linux/slab.h>
+#include <linux/ioctl.h>
+#include <linux/acpi.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
+#include <linux/dmi.h>
+#include <linux/kdebug.h>
+#include <linux/reboot.h>
+#include <linux/efi.h>
+#include <linux/module.h>
+
+#define GSMI_SHUTDOWN_CLEAN	0	/* Clean Shutdown */
+/* TODO(mikew@google.com): Tie in HARDLOCKUP_DETECTOR with NMIWDT */
+#define GSMI_SHUTDOWN_NMIWDT	1	/* NMI Watchdog */
+#define GSMI_SHUTDOWN_PANIC	2	/* Panic */
+#define GSMI_SHUTDOWN_OOPS	3	/* Oops */
+#define GSMI_SHUTDOWN_DIE	4	/* Die -- No longer meaningful */
+#define GSMI_SHUTDOWN_MCE	5	/* Machine Check */
+#define GSMI_SHUTDOWN_SOFTWDT	6	/* Software Watchdog */
+#define GSMI_SHUTDOWN_MBE	7	/* Uncorrected ECC */
+#define GSMI_SHUTDOWN_TRIPLE	8	/* Triple Fault */
+
+#define DRIVER_VERSION		"1.0"
+#define GSMI_GUID_SIZE		16
+#define GSMI_BUF_SIZE		1024
+#define GSMI_BUF_ALIGN		sizeof(u64)
+#define GSMI_CALLBACK		0xef
+
+/* SMI return codes */
+#define GSMI_SUCCESS		0x00
+#define GSMI_UNSUPPORTED2	0x03
+#define GSMI_LOG_FULL		0x0b
+#define GSMI_VAR_NOT_FOUND	0x0e
+#define GSMI_HANDSHAKE_SPIN	0x7d
+#define GSMI_HANDSHAKE_CF	0x7e
+#define GSMI_HANDSHAKE_NONE	0x7f
+#define GSMI_INVALID_PARAMETER	0x82
+#define GSMI_UNSUPPORTED	0x83
+#define GSMI_BUFFER_TOO_SMALL	0x85
+#define GSMI_NOT_READY		0x86
+#define GSMI_DEVICE_ERROR	0x87
+#define GSMI_NOT_FOUND		0x8e
+
+#define QUIRKY_BOARD_HASH 0x78a30a50
+
+/* Internally used commands passed to the firmware */
+#define GSMI_CMD_GET_NVRAM_VAR		0x01
+#define GSMI_CMD_GET_NEXT_VAR		0x02
+#define GSMI_CMD_SET_NVRAM_VAR		0x03
+#define GSMI_CMD_SET_EVENT_LOG		0x08
+#define GSMI_CMD_CLEAR_EVENT_LOG	0x09
+#define GSMI_CMD_CLEAR_CONFIG		0x20
+#define GSMI_CMD_HANDSHAKE_TYPE		0xC1
+
+/* Magic entry type for kernel events */
+#define GSMI_LOG_ENTRY_TYPE_KERNEL     0xDEAD
+
+/* SMI buffers must be in 32bit physical address space */
+struct gsmi_buf {
+	u8 *start;			/* start of buffer */
+	size_t length;			/* length of buffer */
+	dma_addr_t handle;		/* dma allocation handle */
+	u32 address;			/* physical address of buffer */
+};
+
+struct gsmi_device {
+	struct platform_device *pdev;	/* platform device */
+	struct gsmi_buf *name_buf;	/* variable name buffer */
+	struct gsmi_buf *data_buf;	/* generic data buffer */
+	struct gsmi_buf *param_buf;	/* parameter buffer */
+	spinlock_t lock;		/* serialize access to SMIs */
+	u16 smi_cmd;			/* SMI command port */
+	int handshake_type;		/* firmware handler interlock type */
+	struct dma_pool *dma_pool;	/* DMA buffer pool */
+} gsmi_dev;
+
+/* Packed structures for communicating with the firmware */
+struct gsmi_nvram_var_param {
+	efi_guid_t	guid;
+	u32		name_ptr;
+	u32		attributes;
+	u32		data_len;
+	u32		data_ptr;
+} __packed;
+
+struct gsmi_get_next_var_param {
+	u8	guid[GSMI_GUID_SIZE];
+	u32	name_ptr;
+	u32	name_len;
+} __packed;
+
+struct gsmi_set_eventlog_param {
+	u32	data_ptr;
+	u32	data_len;
+	u32	type;
+} __packed;
+
+/* Event log formats */
+struct gsmi_log_entry_type_1 {
+	u16	type;
+	u32	instance;
+} __packed;
+
+
+/*
+ * Some platforms don't have explicit SMI handshake
+ * and need to wait for SMI to complete.
+ */
+#define GSMI_DEFAULT_SPINCOUNT	0x10000
+static unsigned int spincount = GSMI_DEFAULT_SPINCOUNT;
+module_param(spincount, uint, 0600);
+MODULE_PARM_DESC(spincount,
+	"The number of loop iterations to use when using the spin handshake.");
+
+static struct gsmi_buf *gsmi_buf_alloc(void)
+{
+	struct gsmi_buf *smibuf;
+
+	smibuf = kzalloc(sizeof(*smibuf), GFP_KERNEL);
+	if (!smibuf) {
+		printk(KERN_ERR "gsmi: out of memory\n");
+		return NULL;
+	}
+
+	/* allocate buffer in 32bit address space */
+	smibuf->start = dma_pool_alloc(gsmi_dev.dma_pool, GFP_KERNEL,
+				       &smibuf->handle);
+	if (!smibuf->start) {
+		printk(KERN_ERR "gsmi: failed to allocate name buffer\n");
+		kfree(smibuf);
+		return NULL;
+	}
+
+	/* fill in the buffer handle */
+	smibuf->length = GSMI_BUF_SIZE;
+	smibuf->address = (u32)virt_to_phys(smibuf->start);
+
+	return smibuf;
+}
+
+static void gsmi_buf_free(struct gsmi_buf *smibuf)
+{
+	if (smibuf) {
+		if (smibuf->start)
+			dma_pool_free(gsmi_dev.dma_pool, smibuf->start,
+				      smibuf->handle);
+		kfree(smibuf);
+	}
+}
+
+/*
+ * Make a call to gsmi func(sub).  GSMI error codes are translated to
+ * in-kernel errnos (0 on success, -ERRNO on error).
+ */
+static int gsmi_exec(u8 func, u8 sub)
+{
+	u16 cmd = (sub << 8) | func;
+	u16 result = 0;
+	int rc = 0;
+
+	/*
+	 * AH  : Subfunction number
+	 * AL  : Function number
+	 * EBX : Parameter block address
+	 * DX  : SMI command port
+	 *
+	 * Three protocols here. See also the comment in gsmi_init().
+	 */
+	if (gsmi_dev.handshake_type == GSMI_HANDSHAKE_CF) {
+		/*
+		 * If handshake_type == HANDSHAKE_CF then set CF on the
+		 * way in and wait for the handler to clear it; this avoids
+		 * corrupting register state on those chipsets which have
+		 * a delay between writing the SMI trigger register and
+		 * entering SMM.
+		 */
+		asm volatile (
+			"stc\n"
+			"outb %%al, %%dx\n"
+		"1:      jc 1b\n"
+			: "=a" (result)
+			: "0" (cmd),
+			  "d" (gsmi_dev.smi_cmd),
+			  "b" (gsmi_dev.param_buf->address)
+			: "memory", "cc"
+		);
+	} else if (gsmi_dev.handshake_type == GSMI_HANDSHAKE_SPIN) {
+		/*
+		 * If handshake_type == HANDSHAKE_SPIN we spin a
+		 * hundred-ish usecs to ensure the SMI has triggered.
+		 */
+		asm volatile (
+			"outb %%al, %%dx\n"
+		"1:      loop 1b\n"
+			: "=a" (result)
+			: "0" (cmd),
+			  "d" (gsmi_dev.smi_cmd),
+			  "b" (gsmi_dev.param_buf->address),
+			  "c" (spincount)
+			: "memory", "cc"
+		);
+	} else {
+		/*
+		 * If handshake_type == HANDSHAKE_NONE we do nothing;
+		 * either we don't need to or it's legacy firmware that
+		 * doesn't understand the CF protocol.
+		 */
+		asm volatile (
+			"outb %%al, %%dx\n\t"
+			: "=a" (result)
+			: "0" (cmd),
+			  "d" (gsmi_dev.smi_cmd),
+			  "b" (gsmi_dev.param_buf->address)
+			: "memory", "cc"
+		);
+	}
+
+	/* check return code from SMI handler */
+	switch (result) {
+	case GSMI_SUCCESS:
+		break;
+	case GSMI_VAR_NOT_FOUND:
+		/* not really an error, but let the caller know */
+		rc = 1;
+		break;
+	case GSMI_INVALID_PARAMETER:
+		printk(KERN_ERR "gsmi: exec 0x%04x: Invalid parameter\n", cmd);
+		rc = -EINVAL;
+		break;
+	case GSMI_BUFFER_TOO_SMALL:
+		printk(KERN_ERR "gsmi: exec 0x%04x: Buffer too small\n", cmd);
+		rc = -ENOMEM;
+		break;
+	case GSMI_UNSUPPORTED:
+	case GSMI_UNSUPPORTED2:
+		if (sub != GSMI_CMD_HANDSHAKE_TYPE)
+			printk(KERN_ERR "gsmi: exec 0x%04x: Not supported\n",
+			       cmd);
+		rc = -ENOSYS;
+		break;
+	case GSMI_NOT_READY:
+		printk(KERN_ERR "gsmi: exec 0x%04x: Not ready\n", cmd);
+		rc = -EBUSY;
+		break;
+	case GSMI_DEVICE_ERROR:
+		printk(KERN_ERR "gsmi: exec 0x%04x: Device error\n", cmd);
+		rc = -EFAULT;
+		break;
+	case GSMI_NOT_FOUND:
+		printk(KERN_ERR "gsmi: exec 0x%04x: Data not found\n", cmd);
+		rc = -ENOENT;
+		break;
+	case GSMI_LOG_FULL:
+		printk(KERN_ERR "gsmi: exec 0x%04x: Log full\n", cmd);
+		rc = -ENOSPC;
+		break;
+	case GSMI_HANDSHAKE_CF:
+	case GSMI_HANDSHAKE_SPIN:
+	case GSMI_HANDSHAKE_NONE:
+		rc = result;
+		break;
+	default:
+		printk(KERN_ERR "gsmi: exec 0x%04x: Unknown error 0x%04x\n",
+		       cmd, result);
+		rc = -ENXIO;
+	}
+
+	return rc;
+}
+
+/* Return the number of unicode characters in data */
+static size_t
+utf16_strlen(efi_char16_t *data, unsigned long maxlength)
+{
+	unsigned long length = 0;
+
+	while (*data++ != 0 && length < maxlength)
+		length++;
+	return length;
+}
+
+static efi_status_t gsmi_get_variable(efi_char16_t *name,
+				      efi_guid_t *vendor, u32 *attr,
+				      unsigned long *data_size,
+				      void *data)
+{
+	struct gsmi_nvram_var_param param = {
+		.name_ptr = gsmi_dev.name_buf->address,
+		.data_ptr = gsmi_dev.data_buf->address,
+		.data_len = (u32)*data_size,
+	};
+	efi_status_t ret = EFI_SUCCESS;
+	unsigned long flags;
+	size_t name_len = utf16_strlen(name, GSMI_BUF_SIZE / 2);
+	int rc;
+
+	if (name_len >= GSMI_BUF_SIZE / 2)
+		return EFI_BAD_BUFFER_SIZE;
+
+	spin_lock_irqsave(&gsmi_dev.lock, flags);
+
+	/* Vendor guid */
+	memcpy(&param.guid, vendor, sizeof(param.guid));
+
+	/* variable name, already in UTF-16 */
+	memset(gsmi_dev.name_buf->start, 0, gsmi_dev.name_buf->length);
+	memcpy(gsmi_dev.name_buf->start, name, name_len * 2);
+
+	/* data pointer */
+	memset(gsmi_dev.data_buf->start, 0, gsmi_dev.data_buf->length);
+
+	/* parameter buffer */
+	memset(gsmi_dev.param_buf->start, 0, gsmi_dev.param_buf->length);
+	memcpy(gsmi_dev.param_buf->start, &param, sizeof(param));
+
+	rc = gsmi_exec(GSMI_CALLBACK, GSMI_CMD_GET_NVRAM_VAR);
+	if (rc < 0) {
+		printk(KERN_ERR "gsmi: Get Variable failed\n");
+		ret = EFI_LOAD_ERROR;
+	} else if (rc == 1) {
+		/* variable was not found */
+		ret = EFI_NOT_FOUND;
+	} else {
+		/* Get the arguments back */
+		memcpy(&param, gsmi_dev.param_buf->start, sizeof(param));
+
+		/* The size reported is the min of all of our buffers */
+		*data_size = min_t(unsigned long, *data_size,
+						gsmi_dev.data_buf->length);
+		*data_size = min_t(unsigned long, *data_size, param.data_len);
+
+		/* Copy data back to return buffer. */
+		memcpy(data, gsmi_dev.data_buf->start, *data_size);
+
+		/* All variables are have the following attributes */
+		*attr = EFI_VARIABLE_NON_VOLATILE |
+			EFI_VARIABLE_BOOTSERVICE_ACCESS |
+			EFI_VARIABLE_RUNTIME_ACCESS;
+	}
+
+	spin_unlock_irqrestore(&gsmi_dev.lock, flags);
+
+	return ret;
+}
+
+static efi_status_t gsmi_get_next_variable(unsigned long *name_size,
+					   efi_char16_t *name,
+					   efi_guid_t *vendor)
+{
+	struct gsmi_get_next_var_param param = {
+		.name_ptr = gsmi_dev.name_buf->address,
+		.name_len = gsmi_dev.name_buf->length,
+	};
+	efi_status_t ret = EFI_SUCCESS;
+	int rc;
+	unsigned long flags;
+
+	/* For the moment, only support buffers that exactly match in size */
+	if (*name_size != GSMI_BUF_SIZE)
+		return EFI_BAD_BUFFER_SIZE;
+
+	/* Let's make sure the thing is at least null-terminated */
+	if (utf16_strlen(name, GSMI_BUF_SIZE / 2) == GSMI_BUF_SIZE / 2)
+		return EFI_INVALID_PARAMETER;
+
+	spin_lock_irqsave(&gsmi_dev.lock, flags);
+
+	/* guid */
+	memcpy(&param.guid, vendor, sizeof(param.guid));
+
+	/* variable name, already in UTF-16 */
+	memcpy(gsmi_dev.name_buf->start, name, *name_size);
+
+	/* parameter buffer */
+	memset(gsmi_dev.param_buf->start, 0, gsmi_dev.param_buf->length);
+	memcpy(gsmi_dev.param_buf->start, &param, sizeof(param));
+
+	rc = gsmi_exec(GSMI_CALLBACK, GSMI_CMD_GET_NEXT_VAR);
+	if (rc < 0) {
+		printk(KERN_ERR "gsmi: Get Next Variable Name failed\n");
+		ret = EFI_LOAD_ERROR;
+	} else if (rc == 1) {
+		/* variable not found -- end of list */
+		ret = EFI_NOT_FOUND;
+	} else {
+		/* copy variable data back to return buffer */
+		memcpy(&param, gsmi_dev.param_buf->start, sizeof(param));
+
+		/* Copy the name back */
+		memcpy(name, gsmi_dev.name_buf->start, GSMI_BUF_SIZE);
+		*name_size = utf16_strlen(name, GSMI_BUF_SIZE / 2) * 2;
+
+		/* copy guid to return buffer */
+		memcpy(vendor, &param.guid, sizeof(param.guid));
+		ret = EFI_SUCCESS;
+	}
+
+	spin_unlock_irqrestore(&gsmi_dev.lock, flags);
+
+	return ret;
+}
+
+static efi_status_t gsmi_set_variable(efi_char16_t *name,
+				      efi_guid_t *vendor,
+				      u32 attr,
+				      unsigned long data_size,
+				      void *data)
+{
+	struct gsmi_nvram_var_param param = {
+		.name_ptr = gsmi_dev.name_buf->address,
+		.data_ptr = gsmi_dev.data_buf->address,
+		.data_len = (u32)data_size,
+		.attributes = EFI_VARIABLE_NON_VOLATILE |
+			      EFI_VARIABLE_BOOTSERVICE_ACCESS |
+			      EFI_VARIABLE_RUNTIME_ACCESS,
+	};
+	size_t name_len = utf16_strlen(name, GSMI_BUF_SIZE / 2);
+	efi_status_t ret = EFI_SUCCESS;
+	int rc;
+	unsigned long flags;
+
+	if (name_len >= GSMI_BUF_SIZE / 2)
+		return EFI_BAD_BUFFER_SIZE;
+
+	spin_lock_irqsave(&gsmi_dev.lock, flags);
+
+	/* guid */
+	memcpy(&param.guid, vendor, sizeof(param.guid));
+
+	/* variable name, already in UTF-16 */
+	memset(gsmi_dev.name_buf->start, 0, gsmi_dev.name_buf->length);
+	memcpy(gsmi_dev.name_buf->start, name, name_len * 2);
+
+	/* data pointer */
+	memset(gsmi_dev.data_buf->start, 0, gsmi_dev.data_buf->length);
+	memcpy(gsmi_dev.data_buf->start, data, data_size);
+
+	/* parameter buffer */
+	memset(gsmi_dev.param_buf->start, 0, gsmi_dev.param_buf->length);
+	memcpy(gsmi_dev.param_buf->start, &param, sizeof(param));
+
+	rc = gsmi_exec(GSMI_CALLBACK, GSMI_CMD_SET_NVRAM_VAR);
+	if (rc < 0) {
+		printk(KERN_ERR "gsmi: Set Variable failed\n");
+		ret = EFI_INVALID_PARAMETER;
+	}
+
+	spin_unlock_irqrestore(&gsmi_dev.lock, flags);
+
+	return ret;
+}
+
+static const struct efivar_operations efivar_ops = {
+	.get_variable = gsmi_get_variable,
+	.set_variable = gsmi_set_variable,
+	.get_next_variable = gsmi_get_next_variable,
+};
+
+static ssize_t eventlog_write(struct file *filp, struct kobject *kobj,
+			       struct bin_attribute *bin_attr,
+			       char *buf, loff_t pos, size_t count)
+{
+	struct gsmi_set_eventlog_param param = {
+		.data_ptr = gsmi_dev.data_buf->address,
+	};
+	int rc = 0;
+	unsigned long flags;
+
+	/* Pull the type out */
+	if (count < sizeof(u32))
+		return -EINVAL;
+	param.type = *(u32 *)buf;
+	count -= sizeof(u32);
+	buf += sizeof(u32);
+
+	/* The remaining buffer is the data payload */
+	if (count > gsmi_dev.data_buf->length)
+		return -EINVAL;
+	param.data_len = count - sizeof(u32);
+
+	spin_lock_irqsave(&gsmi_dev.lock, flags);
+
+	/* data pointer */
+	memset(gsmi_dev.data_buf->start, 0, gsmi_dev.data_buf->length);
+	memcpy(gsmi_dev.data_buf->start, buf, param.data_len);
+
+	/* parameter buffer */
+	memset(gsmi_dev.param_buf->start, 0, gsmi_dev.param_buf->length);
+	memcpy(gsmi_dev.param_buf->start, &param, sizeof(param));
+
+	rc = gsmi_exec(GSMI_CALLBACK, GSMI_CMD_SET_EVENT_LOG);
+	if (rc < 0)
+		printk(KERN_ERR "gsmi: Set Event Log failed\n");
+
+	spin_unlock_irqrestore(&gsmi_dev.lock, flags);
+
+	return rc;
+
+}
+
+static struct bin_attribute eventlog_bin_attr = {
+	.attr = {.name = "append_to_eventlog", .mode = 0200},
+	.write = eventlog_write,
+};
+
+static ssize_t gsmi_clear_eventlog_store(struct kobject *kobj,
+					 struct kobj_attribute *attr,
+					 const char *buf, size_t count)
+{
+	int rc;
+	unsigned long flags;
+	unsigned long val;
+	struct {
+		u32 percentage;
+		u32 data_type;
+	} param;
+
+	rc = strict_strtoul(buf, 0, &val);
+	if (rc)
+		return rc;
+
+	/*
+	 * Value entered is a percentage, 0 through 100, anything else
+	 * is invalid.
+	 */
+	if (val > 100)
+		return -EINVAL;
+
+	/* data_type here selects the smbios event log. */
+	param.percentage = val;
+	param.data_type = 0;
+
+	spin_lock_irqsave(&gsmi_dev.lock, flags);
+
+	/* parameter buffer */
+	memset(gsmi_dev.param_buf->start, 0, gsmi_dev.param_buf->length);
+	memcpy(gsmi_dev.param_buf->start, &param, sizeof(param));
+
+	rc = gsmi_exec(GSMI_CALLBACK, GSMI_CMD_CLEAR_EVENT_LOG);
+
+	spin_unlock_irqrestore(&gsmi_dev.lock, flags);
+
+	if (rc)
+		return rc;
+	return count;
+}
+
+static struct kobj_attribute gsmi_clear_eventlog_attr = {
+	.attr = {.name = "clear_eventlog", .mode = 0200},
+	.store = gsmi_clear_eventlog_store,
+};
+
+static ssize_t gsmi_clear_config_store(struct kobject *kobj,
+				       struct kobj_attribute *attr,
+				       const char *buf, size_t count)
+{
+	int rc;
+	unsigned long flags;
+
+	spin_lock_irqsave(&gsmi_dev.lock, flags);
+
+	/* clear parameter buffer */
+	memset(gsmi_dev.param_buf->start, 0, gsmi_dev.param_buf->length);
+
+	rc = gsmi_exec(GSMI_CALLBACK, GSMI_CMD_CLEAR_CONFIG);
+
+	spin_unlock_irqrestore(&gsmi_dev.lock, flags);
+
+	if (rc)
+		return rc;
+	return count;
+}
+
+static struct kobj_attribute gsmi_clear_config_attr = {
+	.attr = {.name = "clear_config", .mode = 0200},
+	.store = gsmi_clear_config_store,
+};
+
+static const struct attribute *gsmi_attrs[] = {
+	&gsmi_clear_config_attr.attr,
+	&gsmi_clear_eventlog_attr.attr,
+	NULL,
+};
+
+static int gsmi_shutdown_reason(int reason)
+{
+	struct gsmi_log_entry_type_1 entry = {
+		.type     = GSMI_LOG_ENTRY_TYPE_KERNEL,
+		.instance = reason,
+	};
+	struct gsmi_set_eventlog_param param = {
+		.data_len = sizeof(entry),
+		.type     = 1,
+	};
+	static int saved_reason;
+	int rc = 0;
+	unsigned long flags;
+
+	/* avoid duplicate entries in the log */
+	if (saved_reason & (1 << reason))
+		return 0;
+
+	spin_lock_irqsave(&gsmi_dev.lock, flags);
+
+	saved_reason |= (1 << reason);
+
+	/* data pointer */
+	memset(gsmi_dev.data_buf->start, 0, gsmi_dev.data_buf->length);
+	memcpy(gsmi_dev.data_buf->start, &entry, sizeof(entry));
+
+	/* parameter buffer */
+	param.data_ptr = gsmi_dev.data_buf->address;
+	memset(gsmi_dev.param_buf->start, 0, gsmi_dev.param_buf->length);
+	memcpy(gsmi_dev.param_buf->start, &param, sizeof(param));
+
+	rc = gsmi_exec(GSMI_CALLBACK, GSMI_CMD_SET_EVENT_LOG);
+
+	spin_unlock_irqrestore(&gsmi_dev.lock, flags);
+
+	if (rc < 0)
+		printk(KERN_ERR "gsmi: Log Shutdown Reason failed\n");
+	else
+		printk(KERN_EMERG "gsmi: Log Shutdown Reason 0x%02x\n",
+		       reason);
+
+	return rc;
+}
+
+static int gsmi_reboot_callback(struct notifier_block *nb,
+				unsigned long reason, void *arg)
+{
+	gsmi_shutdown_reason(GSMI_SHUTDOWN_CLEAN);
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block gsmi_reboot_notifier = {
+	.notifier_call = gsmi_reboot_callback
+};
+
+static int gsmi_die_callback(struct notifier_block *nb,
+			     unsigned long reason, void *arg)
+{
+	if (reason == DIE_OOPS)
+		gsmi_shutdown_reason(GSMI_SHUTDOWN_OOPS);
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block gsmi_die_notifier = {
+	.notifier_call = gsmi_die_callback
+};
+
+static int gsmi_panic_callback(struct notifier_block *nb,
+			       unsigned long reason, void *arg)
+{
+	gsmi_shutdown_reason(GSMI_SHUTDOWN_PANIC);
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block gsmi_panic_notifier = {
+	.notifier_call = gsmi_panic_callback,
+};
+
+/*
+ * This hash function was blatantly copied from include/linux/hash.h.
+ * It is used by this driver to obfuscate a board name that requires a
+ * quirk within this driver.
+ *
+ * Please do not remove this copy of the function as any changes to the
+ * global utility hash_64() function would break this driver's ability
+ * to identify a board and provide the appropriate quirk -- mikew@google.com
+ */
+static u64 __init local_hash_64(u64 val, unsigned bits)
+{
+	u64 hash = val;
+
+	/*  Sigh, gcc can't optimise this alone like it does for 32 bits. */
+	u64 n = hash;
+	n <<= 18;
+	hash -= n;
+	n <<= 33;
+	hash -= n;
+	n <<= 3;
+	hash += n;
+	n <<= 3;
+	hash -= n;
+	n <<= 4;
+	hash += n;
+	n <<= 2;
+	hash += n;
+
+	/* High bits are more random, so use them. */
+	return hash >> (64 - bits);
+}
+
+static u32 __init hash_oem_table_id(char s[8])
+{
+	u64 input;
+	memcpy(&input, s, 8);
+	return local_hash_64(input, 32);
+}
+
+static struct dmi_system_id gsmi_dmi_table[] __initdata = {
+	{
+		.ident = "Google Board",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "Google, Inc."),
+		},
+	},
+	{}
+};
+MODULE_DEVICE_TABLE(dmi, gsmi_dmi_table);
+
+static __init int gsmi_system_valid(void)
+{
+	u32 hash;
+
+	if (!dmi_check_system(gsmi_dmi_table))
+		return -ENODEV;
+
+	/*
+	 * Only newer firmware supports the gsmi interface.  All older
+	 * firmware that didn't support this interface used to plug the
+	 * table name in the first four bytes of the oem_table_id field.
+	 * Newer firmware doesn't do that though, so use that as the
+	 * discriminant factor.  We have to do this in order to
+	 * whitewash our board names out of the public driver.
+	 */
+	if (!strncmp(acpi_gbl_FADT.header.oem_table_id, "FACP", 4)) {
+		printk(KERN_INFO "gsmi: Board is too old\n");
+		return -ENODEV;
+	}
+
+	/* Disable on board with 1.0 BIOS due to Google bug 2602657 */
+	hash = hash_oem_table_id(acpi_gbl_FADT.header.oem_table_id);
+	if (hash == QUIRKY_BOARD_HASH) {
+		const char *bios_ver = dmi_get_system_info(DMI_BIOS_VERSION);
+		if (strncmp(bios_ver, "1.0", 3) == 0) {
+			pr_info("gsmi: disabled on this board's BIOS %s\n",
+				bios_ver);
+			return -ENODEV;
+		}
+	}
+
+	/* check for valid SMI command port in ACPI FADT */
+	if (acpi_gbl_FADT.smi_command == 0) {
+		pr_info("gsmi: missing smi_command\n");
+		return -ENODEV;
+	}
+
+	/* Found */
+	return 0;
+}
+
+static struct kobject *gsmi_kobj;
+static struct efivars efivars;
+
+static __init int gsmi_init(void)
+{
+	unsigned long flags;
+	int ret;
+
+	ret = gsmi_system_valid();
+	if (ret)
+		return ret;
+
+	gsmi_dev.smi_cmd = acpi_gbl_FADT.smi_command;
+
+	/* register device */
+	gsmi_dev.pdev = platform_device_register_simple("gsmi", -1, NULL, 0);
+	if (IS_ERR(gsmi_dev.pdev)) {
+		printk(KERN_ERR "gsmi: unable to register platform device\n");
+		return PTR_ERR(gsmi_dev.pdev);
+	}
+
+	/* SMI access needs to be serialized */
+	spin_lock_init(&gsmi_dev.lock);
+
+	/* SMI callbacks require 32bit addresses */
+	gsmi_dev.pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
+	gsmi_dev.pdev->dev.dma_mask =
+		&gsmi_dev.pdev->dev.coherent_dma_mask;
+	ret = -ENOMEM;
+	gsmi_dev.dma_pool = dma_pool_create("gsmi", &gsmi_dev.pdev->dev,
+					     GSMI_BUF_SIZE, GSMI_BUF_ALIGN, 0);
+	if (!gsmi_dev.dma_pool)
+		goto out_err;
+
+	/*
+	 * pre-allocate buffers because sometimes we are called when
+	 * this is not feasible: oops, panic, die, mce, etc
+	 */
+	gsmi_dev.name_buf = gsmi_buf_alloc();
+	if (!gsmi_dev.name_buf) {
+		printk(KERN_ERR "gsmi: failed to allocate name buffer\n");
+		goto out_err;
+	}
+
+	gsmi_dev.data_buf = gsmi_buf_alloc();
+	if (!gsmi_dev.data_buf) {
+		printk(KERN_ERR "gsmi: failed to allocate data buffer\n");
+		goto out_err;
+	}
+
+	gsmi_dev.param_buf = gsmi_buf_alloc();
+	if (!gsmi_dev.param_buf) {
+		printk(KERN_ERR "gsmi: failed to allocate param buffer\n");
+		goto out_err;
+	}
+
+	/*
+	 * Determine type of handshake used to serialize the SMI
+	 * entry. See also gsmi_exec().
+	 *
+	 * There's a "behavior" present on some chipsets where writing the
+	 * SMI trigger register in the southbridge doesn't result in an
+	 * immediate SMI. Rather, the processor can execute "a few" more
+	 * instructions before the SMI takes effect. To ensure synchronous
+	 * behavior, implement a handshake between the kernel driver and the
+	 * firmware handler to spin until released. This ioctl determines
+	 * the type of handshake.
+	 *
+	 * NONE: The firmware handler does not implement any
+	 * handshake. Either it doesn't need to, or it's legacy firmware
+	 * that doesn't know it needs to and never will.
+	 *
+	 * CF: The firmware handler will clear the CF in the saved
+	 * state before returning. The driver may set the CF and test for
+	 * it to clear before proceeding.
+	 *
+	 * SPIN: The firmware handler does not implement any handshake
+	 * but the driver should spin for a hundred or so microseconds
+	 * to ensure the SMI has triggered.
+	 *
+	 * Finally, the handler will return -ENOSYS if
+	 * GSMI_CMD_HANDSHAKE_TYPE is unimplemented, which implies
+	 * HANDSHAKE_NONE.
+	 */
+	spin_lock_irqsave(&gsmi_dev.lock, flags);
+	gsmi_dev.handshake_type = GSMI_HANDSHAKE_SPIN;
+	gsmi_dev.handshake_type =
+	    gsmi_exec(GSMI_CALLBACK, GSMI_CMD_HANDSHAKE_TYPE);
+	if (gsmi_dev.handshake_type == -ENOSYS)
+		gsmi_dev.handshake_type = GSMI_HANDSHAKE_NONE;
+	spin_unlock_irqrestore(&gsmi_dev.lock, flags);
+
+	/* Remove and clean up gsmi if the handshake could not complete. */
+	if (gsmi_dev.handshake_type == -ENXIO) {
+		printk(KERN_INFO "gsmi version " DRIVER_VERSION
+		       " failed to load\n");
+		ret = -ENODEV;
+		goto out_err;
+	}
+
+	/* Register in the firmware directory */
+	ret = -ENOMEM;
+	gsmi_kobj = kobject_create_and_add("gsmi", firmware_kobj);
+	if (!gsmi_kobj) {
+		printk(KERN_INFO "gsmi: Failed to create firmware kobj\n");
+		goto out_err;
+	}
+
+	/* Setup eventlog access */
+	ret = sysfs_create_bin_file(gsmi_kobj, &eventlog_bin_attr);
+	if (ret) {
+		printk(KERN_INFO "gsmi: Failed to setup eventlog");
+		goto out_err;
+	}
+
+	/* Other attributes */
+	ret = sysfs_create_files(gsmi_kobj, gsmi_attrs);
+	if (ret) {
+		printk(KERN_INFO "gsmi: Failed to add attrs");
+		goto out_remove_bin_file;
+	}
+
+	ret = register_efivars(&efivars, &efivar_ops, gsmi_kobj);
+	if (ret) {
+		printk(KERN_INFO "gsmi: Failed to register efivars\n");
+		goto out_remove_sysfs_files;
+	}
+
+	register_reboot_notifier(&gsmi_reboot_notifier);
+	register_die_notifier(&gsmi_die_notifier);
+	atomic_notifier_chain_register(&panic_notifier_list,
+				       &gsmi_panic_notifier);
+
+	printk(KERN_INFO "gsmi version " DRIVER_VERSION " loaded\n");
+
+	return 0;
+
+out_remove_sysfs_files:
+	sysfs_remove_files(gsmi_kobj, gsmi_attrs);
+out_remove_bin_file:
+	sysfs_remove_bin_file(gsmi_kobj, &eventlog_bin_attr);
+out_err:
+	kobject_put(gsmi_kobj);
+	gsmi_buf_free(gsmi_dev.param_buf);
+	gsmi_buf_free(gsmi_dev.data_buf);
+	gsmi_buf_free(gsmi_dev.name_buf);
+	if (gsmi_dev.dma_pool)
+		dma_pool_destroy(gsmi_dev.dma_pool);
+	platform_device_unregister(gsmi_dev.pdev);
+	pr_info("gsmi: failed to load: %d\n", ret);
+	return ret;
+}
+
+static void __exit gsmi_exit(void)
+{
+	unregister_reboot_notifier(&gsmi_reboot_notifier);
+	unregister_die_notifier(&gsmi_die_notifier);
+	atomic_notifier_chain_unregister(&panic_notifier_list,
+					 &gsmi_panic_notifier);
+	unregister_efivars(&efivars);
+
+	sysfs_remove_files(gsmi_kobj, gsmi_attrs);
+	sysfs_remove_bin_file(gsmi_kobj, &eventlog_bin_attr);
+	kobject_put(gsmi_kobj);
+	gsmi_buf_free(gsmi_dev.param_buf);
+	gsmi_buf_free(gsmi_dev.data_buf);
+	gsmi_buf_free(gsmi_dev.name_buf);
+	dma_pool_destroy(gsmi_dev.dma_pool);
+	platform_device_unregister(gsmi_dev.pdev);
+}
+
+module_init(gsmi_init);
+module_exit(gsmi_exit);
+
+MODULE_AUTHOR("Google, Inc.");
+MODULE_LICENSE("GPL");
diff --git a/drivers/firmware/google/memconsole.c b/drivers/firmware/google/memconsole.c
new file mode 100644
index 00000000..2a90ba61
--- /dev/null
+++ b/drivers/firmware/google/memconsole.c
@@ -0,0 +1,166 @@
+/*
+ * memconsole.c
+ *
+ * Infrastructure for importing the BIOS memory based console
+ * into the kernel log ringbuffer.
+ *
+ * Copyright 2010 Google Inc. All rights reserved.
+ */
+
+#include <linux/ctype.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/sysfs.h>
+#include <linux/kobject.h>
+#include <linux/module.h>
+#include <linux/dmi.h>
+#include <asm/bios_ebda.h>
+
+#define BIOS_MEMCONSOLE_V1_MAGIC	0xDEADBABE
+#define BIOS_MEMCONSOLE_V2_MAGIC	(('M')|('C'<<8)|('O'<<16)|('N'<<24))
+
+struct biosmemcon_ebda {
+	u32 signature;
+	union {
+		struct {
+			u8  enabled;
+			u32 buffer_addr;
+			u16 start;
+			u16 end;
+			u16 num_chars;
+			u8  wrapped;
+		} __packed v1;
+		struct {
+			u32 buffer_addr;
+			/* Misdocumented as number of pages! */
+			u16 num_bytes;
+			u16 start;
+			u16 end;
+		} __packed v2;
+	};
+} __packed;
+
+static char *memconsole_baseaddr;
+static size_t memconsole_length;
+
+static ssize_t memconsole_read(struct file *filp, struct kobject *kobp,
+			       struct bin_attribute *bin_attr, char *buf,
+			       loff_t pos, size_t count)
+{
+	return memory_read_from_buffer(buf, count, &pos, memconsole_baseaddr,
+				       memconsole_length);
+}
+
+static struct bin_attribute memconsole_bin_attr = {
+	.attr = {.name = "log", .mode = 0444},
+	.read = memconsole_read,
+};
+
+
+static void found_v1_header(struct biosmemcon_ebda *hdr)
+{
+	printk(KERN_INFO "BIOS console v1 EBDA structure found at %p\n", hdr);
+	printk(KERN_INFO "BIOS console buffer at 0x%.8x, "
+	       "start = %d, end = %d, num = %d\n",
+	       hdr->v1.buffer_addr, hdr->v1.start,
+	       hdr->v1.end, hdr->v1.num_chars);
+
+	memconsole_length = hdr->v1.num_chars;
+	memconsole_baseaddr = phys_to_virt(hdr->v1.buffer_addr);
+}
+
+static void found_v2_header(struct biosmemcon_ebda *hdr)
+{
+	printk(KERN_INFO "BIOS console v2 EBDA structure found at %p\n", hdr);
+	printk(KERN_INFO "BIOS console buffer at 0x%.8x, "
+	       "start = %d, end = %d, num_bytes = %d\n",
+	       hdr->v2.buffer_addr, hdr->v2.start,
+	       hdr->v2.end, hdr->v2.num_bytes);
+
+	memconsole_length = hdr->v2.end - hdr->v2.start;
+	memconsole_baseaddr = phys_to_virt(hdr->v2.buffer_addr
+					   + hdr->v2.start);
+}
+
+/*
+ * Search through the EBDA for the BIOS Memory Console, and
+ * set the global variables to point to it.  Return true if found.
+ */
+static bool found_memconsole(void)
+{
+	unsigned int address;
+	size_t length, cur;
+
+	address = get_bios_ebda();
+	if (!address) {
+		printk(KERN_INFO "BIOS EBDA non-existent.\n");
+		return false;
+	}
+
+	/* EBDA length is byte 0 of EBDA (in KB) */
+	length = *(u8 *)phys_to_virt(address);
+	length <<= 10; /* convert to bytes */
+
+	/*
+	 * Search through EBDA for BIOS memory console structure
+	 * note: signature is not necessarily dword-aligned
+	 */
+	for (cur = 0; cur < length; cur++) {
+		struct biosmemcon_ebda *hdr = phys_to_virt(address + cur);
+
+		/* memconsole v1 */
+		if (hdr->signature == BIOS_MEMCONSOLE_V1_MAGIC) {
+			found_v1_header(hdr);
+			return true;
+		}
+
+		/* memconsole v2 */
+		if (hdr->signature == BIOS_MEMCONSOLE_V2_MAGIC) {
+			found_v2_header(hdr);
+			return true;
+		}
+	}
+
+	printk(KERN_INFO "BIOS console EBDA structure not found!\n");
+	return false;
+}
+
+static struct dmi_system_id memconsole_dmi_table[] __initdata = {
+	{
+		.ident = "Google Board",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "Google, Inc."),
+		},
+	},
+	{}
+};
+MODULE_DEVICE_TABLE(dmi, memconsole_dmi_table);
+
+static int __init memconsole_init(void)
+{
+	int ret;
+
+	if (!dmi_check_system(memconsole_dmi_table))
+		return -ENODEV;
+
+	if (!found_memconsole())
+		return -ENODEV;
+
+	memconsole_bin_attr.size = memconsole_length;
+
+	ret = sysfs_create_bin_file(firmware_kobj, &memconsole_bin_attr);
+
+	return ret;
+}
+
+static void __exit memconsole_exit(void)
+{
+	sysfs_remove_bin_file(firmware_kobj, &memconsole_bin_attr);
+}
+
+module_init(memconsole_init);
+module_exit(memconsole_exit);
+
+MODULE_AUTHOR("Google, Inc.");
+MODULE_LICENSE("GPL");
diff --git a/drivers/firmware/iscsi_ibft.c b/drivers/firmware/iscsi_ibft.c
new file mode 100644
index 00000000..3ee852c9
--- /dev/null
+++ b/drivers/firmware/iscsi_ibft.c
@@ -0,0 +1,821 @@
+/*
+ *  Copyright 2007-2010 Red Hat, Inc.
+ *  by Peter Jones <pjones@redhat.com>
+ *  Copyright 2008 IBM, Inc.
+ *  by Konrad Rzeszutek <konradr@linux.vnet.ibm.com>
+ *  Copyright 2008
+ *  by Konrad Rzeszutek <ketuzsezr@darnok.org>
+ *
+ * This code exposes the iSCSI Boot Format Table to userland via sysfs.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License v2.0 as published by
+ * the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * Changelog:
+ *
+ *  06 Jan 2010 - Peter Jones <pjones@redhat.com>
+ *    New changelog entries are in the git log from now on.  Not here.
+ *
+ *  14 Mar 2008 - Konrad Rzeszutek <ketuzsezr@darnok.org>
+ *    Updated comments and copyrights. (v0.4.9)
+ *
+ *  11 Feb 2008 - Konrad Rzeszutek <konradr@linux.vnet.ibm.com>
+ *    Converted to using ibft_addr. (v0.4.8)
+ *
+ *   8 Feb 2008 - Konrad Rzeszutek <konradr@linux.vnet.ibm.com>
+ *    Combined two functions in one: reserve_ibft_region. (v0.4.7)
+ *
+ *  30 Jan 2008 - Konrad Rzeszutek <konradr@linux.vnet.ibm.com>
+ *   Added logic to handle IPv6 addresses. (v0.4.6)
+ *
+ *  25 Jan 2008 - Konrad Rzeszutek <konradr@linux.vnet.ibm.com>
+ *   Added logic to handle badly not-to-spec iBFT. (v0.4.5)
+ *
+ *   4 Jan 2008 - Konrad Rzeszutek <konradr@linux.vnet.ibm.com>
+ *   Added __init to function declarations. (v0.4.4)
+ *
+ *  21 Dec 2007 - Konrad Rzeszutek <konradr@linux.vnet.ibm.com>
+ *   Updated kobject registration, combined unregister functions in one
+ *   and code and style cleanup. (v0.4.3)
+ *
+ *   5 Dec 2007 - Konrad Rzeszutek <konradr@linux.vnet.ibm.com>
+ *   Added end-markers to enums and re-organized kobject registration. (v0.4.2)
+ *
+ *   4 Dec 2007 - Konrad Rzeszutek <konradr@linux.vnet.ibm.com>
+ *   Created 'device' sysfs link to the NIC and style cleanup. (v0.4.1)
+ *
+ *  28 Nov 2007 - Konrad Rzeszutek <konradr@linux.vnet.ibm.com>
+ *   Added sysfs-ibft documentation, moved 'find_ibft' function to
+ *   in its own file and added text attributes for every struct field.  (v0.4)
+ *
+ *  21 Nov 2007 - Konrad Rzeszutek <konradr@linux.vnet.ibm.com>
+ *   Added text attributes emulating OpenFirmware /proc/device-tree naming.
+ *   Removed binary /sysfs interface (v0.3)
+ *
+ *  29 Aug 2007 - Konrad Rzeszutek <konradr@linux.vnet.ibm.com>
+ *   Added functionality in setup.c to reserve iBFT region. (v0.2)
+ *
+ *  27 Aug 2007 - Konrad Rzeszutek <konradr@linux.vnet.ibm.com>
+ *   First version exposing iBFT data via a binary /sysfs. (v0.1)
+ *
+ */
+
+
+#include <linux/blkdev.h>
+#include <linux/capability.h>
+#include <linux/ctype.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/iscsi_ibft.h>
+#include <linux/limits.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/slab.h>
+#include <linux/stat.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/acpi.h>
+#include <linux/iscsi_boot_sysfs.h>
+
+#define IBFT_ISCSI_VERSION "0.5.0"
+#define IBFT_ISCSI_DATE "2010-Feb-25"
+
+MODULE_AUTHOR("Peter Jones <pjones@redhat.com> and "
+	      "Konrad Rzeszutek <ketuzsezr@darnok.org>");
+MODULE_DESCRIPTION("sysfs interface to BIOS iBFT information");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(IBFT_ISCSI_VERSION);
+
+struct ibft_hdr {
+	u8 id;
+	u8 version;
+	u16 length;
+	u8 index;
+	u8 flags;
+} __attribute__((__packed__));
+
+struct ibft_control {
+	struct ibft_hdr hdr;
+	u16 extensions;
+	u16 initiator_off;
+	u16 nic0_off;
+	u16 tgt0_off;
+	u16 nic1_off;
+	u16 tgt1_off;
+} __attribute__((__packed__));
+
+struct ibft_initiator {
+	struct ibft_hdr hdr;
+	char isns_server[16];
+	char slp_server[16];
+	char pri_radius_server[16];
+	char sec_radius_server[16];
+	u16 initiator_name_len;
+	u16 initiator_name_off;
+} __attribute__((__packed__));
+
+struct ibft_nic {
+	struct ibft_hdr hdr;
+	char ip_addr[16];
+	u8 subnet_mask_prefix;
+	u8 origin;
+	char gateway[16];
+	char primary_dns[16];
+	char secondary_dns[16];
+	char dhcp[16];
+	u16 vlan;
+	char mac[6];
+	u16 pci_bdf;
+	u16 hostname_len;
+	u16 hostname_off;
+} __attribute__((__packed__));
+
+struct ibft_tgt {
+	struct ibft_hdr hdr;
+	char ip_addr[16];
+	u16 port;
+	char lun[8];
+	u8 chap_type;
+	u8 nic_assoc;
+	u16 tgt_name_len;
+	u16 tgt_name_off;
+	u16 chap_name_len;
+	u16 chap_name_off;
+	u16 chap_secret_len;
+	u16 chap_secret_off;
+	u16 rev_chap_name_len;
+	u16 rev_chap_name_off;
+	u16 rev_chap_secret_len;
+	u16 rev_chap_secret_off;
+} __attribute__((__packed__));
+
+/*
+ * The kobject different types and its names.
+ *
+*/
+enum ibft_id {
+	id_reserved = 0, /* We don't support. */
+	id_control = 1, /* Should show up only once and is not exported. */
+	id_initiator = 2,
+	id_nic = 3,
+	id_target = 4,
+	id_extensions = 5, /* We don't support. */
+	id_end_marker,
+};
+
+/*
+ * The kobject and attribute structures.
+ */
+
+struct ibft_kobject {
+	struct acpi_table_ibft *header;
+	union {
+		struct ibft_initiator *initiator;
+		struct ibft_nic *nic;
+		struct ibft_tgt *tgt;
+		struct ibft_hdr *hdr;
+	};
+};
+
+static struct iscsi_boot_kset *boot_kset;
+
+static const char nulls[16];
+
+/*
+ * Helper functions to parse data properly.
+ */
+static ssize_t sprintf_ipaddr(char *buf, u8 *ip)
+{
+	char *str = buf;
+
+	if (ip[0] == 0 && ip[1] == 0 && ip[2] == 0 && ip[3] == 0 &&
+	    ip[4] == 0 && ip[5] == 0 && ip[6] == 0 && ip[7] == 0 &&
+	    ip[8] == 0 && ip[9] == 0 && ip[10] == 0xff && ip[11] == 0xff) {
+		/*
+		 * IPV4
+		 */
+		str += sprintf(buf, "%pI4", ip + 12);
+	} else {
+		/*
+		 * IPv6
+		 */
+		str += sprintf(str, "%pI6", ip);
+	}
+	str += sprintf(str, "\n");
+	return str - buf;
+}
+
+static ssize_t sprintf_string(char *str, int len, char *buf)
+{
+	return sprintf(str, "%.*s\n", len, buf);
+}
+
+/*
+ * Helper function to verify the IBFT header.
+ */
+static int ibft_verify_hdr(char *t, struct ibft_hdr *hdr, int id, int length)
+{
+	if (hdr->id != id) {
+		printk(KERN_ERR "iBFT error: We expected the %s " \
+				"field header.id to have %d but " \
+				"found %d instead!\n", t, id, hdr->id);
+		return -ENODEV;
+	}
+	if (hdr->length != length) {
+		printk(KERN_ERR "iBFT error: We expected the %s " \
+				"field header.length to have %d but " \
+				"found %d instead!\n", t, length, hdr->length);
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+/*
+ *  Routines for parsing the iBFT data to be human readable.
+ */
+static ssize_t ibft_attr_show_initiator(void *data, int type, char *buf)
+{
+	struct ibft_kobject *entry = data;
+	struct ibft_initiator *initiator = entry->initiator;
+	void *ibft_loc = entry->header;
+	char *str = buf;
+
+	if (!initiator)
+		return 0;
+
+	switch (type) {
+	case ISCSI_BOOT_INI_INDEX:
+		str += sprintf(str, "%d\n", initiator->hdr.index);
+		break;
+	case ISCSI_BOOT_INI_FLAGS:
+		str += sprintf(str, "%d\n", initiator->hdr.flags);
+		break;
+	case ISCSI_BOOT_INI_ISNS_SERVER:
+		str += sprintf_ipaddr(str, initiator->isns_server);
+		break;
+	case ISCSI_BOOT_INI_SLP_SERVER:
+		str += sprintf_ipaddr(str, initiator->slp_server);
+		break;
+	case ISCSI_BOOT_INI_PRI_RADIUS_SERVER:
+		str += sprintf_ipaddr(str, initiator->pri_radius_server);
+		break;
+	case ISCSI_BOOT_INI_SEC_RADIUS_SERVER:
+		str += sprintf_ipaddr(str, initiator->sec_radius_server);
+		break;
+	case ISCSI_BOOT_INI_INITIATOR_NAME:
+		str += sprintf_string(str, initiator->initiator_name_len,
+				      (char *)ibft_loc +
+				      initiator->initiator_name_off);
+		break;
+	default:
+		break;
+	}
+
+	return str - buf;
+}
+
+static ssize_t ibft_attr_show_nic(void *data, int type, char *buf)
+{
+	struct ibft_kobject *entry = data;
+	struct ibft_nic *nic = entry->nic;
+	void *ibft_loc = entry->header;
+	char *str = buf;
+	__be32 val;
+
+	if (!nic)
+		return 0;
+
+	switch (type) {
+	case ISCSI_BOOT_ETH_INDEX:
+		str += sprintf(str, "%d\n", nic->hdr.index);
+		break;
+	case ISCSI_BOOT_ETH_FLAGS:
+		str += sprintf(str, "%d\n", nic->hdr.flags);
+		break;
+	case ISCSI_BOOT_ETH_IP_ADDR:
+		str += sprintf_ipaddr(str, nic->ip_addr);
+		break;
+	case ISCSI_BOOT_ETH_SUBNET_MASK:
+		val = cpu_to_be32(~((1 << (32-nic->subnet_mask_prefix))-1));
+		str += sprintf(str, "%pI4", &val);
+		break;
+	case ISCSI_BOOT_ETH_ORIGIN:
+		str += sprintf(str, "%d\n", nic->origin);
+		break;
+	case ISCSI_BOOT_ETH_GATEWAY:
+		str += sprintf_ipaddr(str, nic->gateway);
+		break;
+	case ISCSI_BOOT_ETH_PRIMARY_DNS:
+		str += sprintf_ipaddr(str, nic->primary_dns);
+		break;
+	case ISCSI_BOOT_ETH_SECONDARY_DNS:
+		str += sprintf_ipaddr(str, nic->secondary_dns);
+		break;
+	case ISCSI_BOOT_ETH_DHCP:
+		str += sprintf_ipaddr(str, nic->dhcp);
+		break;
+	case ISCSI_BOOT_ETH_VLAN:
+		str += sprintf(str, "%d\n", nic->vlan);
+		break;
+	case ISCSI_BOOT_ETH_MAC:
+		str += sprintf(str, "%pM\n", nic->mac);
+		break;
+	case ISCSI_BOOT_ETH_HOSTNAME:
+		str += sprintf_string(str, nic->hostname_len,
+				      (char *)ibft_loc + nic->hostname_off);
+		break;
+	default:
+		break;
+	}
+
+	return str - buf;
+};
+
+static ssize_t ibft_attr_show_target(void *data, int type, char *buf)
+{
+	struct ibft_kobject *entry = data;
+	struct ibft_tgt *tgt = entry->tgt;
+	void *ibft_loc = entry->header;
+	char *str = buf;
+	int i;
+
+	if (!tgt)
+		return 0;
+
+	switch (type) {
+	case ISCSI_BOOT_TGT_INDEX:
+		str += sprintf(str, "%d\n", tgt->hdr.index);
+		break;
+	case ISCSI_BOOT_TGT_FLAGS:
+		str += sprintf(str, "%d\n", tgt->hdr.flags);
+		break;
+	case ISCSI_BOOT_TGT_IP_ADDR:
+		str += sprintf_ipaddr(str, tgt->ip_addr);
+		break;
+	case ISCSI_BOOT_TGT_PORT:
+		str += sprintf(str, "%d\n", tgt->port);
+		break;
+	case ISCSI_BOOT_TGT_LUN:
+		for (i = 0; i < 8; i++)
+			str += sprintf(str, "%x", (u8)tgt->lun[i]);
+		str += sprintf(str, "\n");
+		break;
+	case ISCSI_BOOT_TGT_NIC_ASSOC:
+		str += sprintf(str, "%d\n", tgt->nic_assoc);
+		break;
+	case ISCSI_BOOT_TGT_CHAP_TYPE:
+		str += sprintf(str, "%d\n", tgt->chap_type);
+		break;
+	case ISCSI_BOOT_TGT_NAME:
+		str += sprintf_string(str, tgt->tgt_name_len,
+				      (char *)ibft_loc + tgt->tgt_name_off);
+		break;
+	case ISCSI_BOOT_TGT_CHAP_NAME:
+		str += sprintf_string(str, tgt->chap_name_len,
+				      (char *)ibft_loc + tgt->chap_name_off);
+		break;
+	case ISCSI_BOOT_TGT_CHAP_SECRET:
+		str += sprintf_string(str, tgt->chap_secret_len,
+				      (char *)ibft_loc + tgt->chap_secret_off);
+		break;
+	case ISCSI_BOOT_TGT_REV_CHAP_NAME:
+		str += sprintf_string(str, tgt->rev_chap_name_len,
+				      (char *)ibft_loc +
+				      tgt->rev_chap_name_off);
+		break;
+	case ISCSI_BOOT_TGT_REV_CHAP_SECRET:
+		str += sprintf_string(str, tgt->rev_chap_secret_len,
+				      (char *)ibft_loc +
+				      tgt->rev_chap_secret_off);
+		break;
+	default:
+		break;
+	}
+
+	return str - buf;
+}
+
+static int __init ibft_check_device(void)
+{
+	int len;
+	u8 *pos;
+	u8 csum = 0;
+
+	len = ibft_addr->header.length;
+
+	/* Sanity checking of iBFT. */
+	if (ibft_addr->header.revision != 1) {
+		printk(KERN_ERR "iBFT module supports only revision 1, " \
+				"while this is %d.\n",
+				ibft_addr->header.revision);
+		return -ENOENT;
+	}
+	for (pos = (u8 *)ibft_addr; pos < (u8 *)ibft_addr + len; pos++)
+		csum += *pos;
+
+	if (csum) {
+		printk(KERN_ERR "iBFT has incorrect checksum (0x%x)!\n", csum);
+		return -ENOENT;
+	}
+
+	return 0;
+}
+
+/*
+ * Helper routiners to check to determine if the entry is valid
+ * in the proper iBFT structure.
+ */
+static umode_t ibft_check_nic_for(void *data, int type)
+{
+	struct ibft_kobject *entry = data;
+	struct ibft_nic *nic = entry->nic;
+	umode_t rc = 0;
+
+	switch (type) {
+	case ISCSI_BOOT_ETH_INDEX:
+	case ISCSI_BOOT_ETH_FLAGS:
+		rc = S_IRUGO;
+		break;
+	case ISCSI_BOOT_ETH_IP_ADDR:
+		if (memcmp(nic->ip_addr, nulls, sizeof(nic->ip_addr)))
+			rc = S_IRUGO;
+		break;
+	case ISCSI_BOOT_ETH_SUBNET_MASK:
+		if (nic->subnet_mask_prefix)
+			rc = S_IRUGO;
+		break;
+	case ISCSI_BOOT_ETH_ORIGIN:
+		rc = S_IRUGO;
+		break;
+	case ISCSI_BOOT_ETH_GATEWAY:
+		if (memcmp(nic->gateway, nulls, sizeof(nic->gateway)))
+			rc = S_IRUGO;
+		break;
+	case ISCSI_BOOT_ETH_PRIMARY_DNS:
+		if (memcmp(nic->primary_dns, nulls,
+			   sizeof(nic->primary_dns)))
+			rc = S_IRUGO;
+		break;
+	case ISCSI_BOOT_ETH_SECONDARY_DNS:
+		if (memcmp(nic->secondary_dns, nulls,
+			   sizeof(nic->secondary_dns)))
+			rc = S_IRUGO;
+		break;
+	case ISCSI_BOOT_ETH_DHCP:
+		if (memcmp(nic->dhcp, nulls, sizeof(nic->dhcp)))
+			rc = S_IRUGO;
+		break;
+	case ISCSI_BOOT_ETH_VLAN:
+	case ISCSI_BOOT_ETH_MAC:
+		rc = S_IRUGO;
+		break;
+	case ISCSI_BOOT_ETH_HOSTNAME:
+		if (nic->hostname_off)
+			rc = S_IRUGO;
+		break;
+	default:
+		break;
+	}
+
+	return rc;
+}
+
+static umode_t __init ibft_check_tgt_for(void *data, int type)
+{
+	struct ibft_kobject *entry = data;
+	struct ibft_tgt *tgt = entry->tgt;
+	umode_t rc = 0;
+
+	switch (type) {
+	case ISCSI_BOOT_TGT_INDEX:
+	case ISCSI_BOOT_TGT_FLAGS:
+	case ISCSI_BOOT_TGT_IP_ADDR:
+	case ISCSI_BOOT_TGT_PORT:
+	case ISCSI_BOOT_TGT_LUN:
+	case ISCSI_BOOT_TGT_NIC_ASSOC:
+	case ISCSI_BOOT_TGT_CHAP_TYPE:
+		rc = S_IRUGO;
+	case ISCSI_BOOT_TGT_NAME:
+		if (tgt->tgt_name_len)
+			rc = S_IRUGO;
+		break;
+	case ISCSI_BOOT_TGT_CHAP_NAME:
+	case ISCSI_BOOT_TGT_CHAP_SECRET:
+		if (tgt->chap_name_len)
+			rc = S_IRUGO;
+		break;
+	case ISCSI_BOOT_TGT_REV_CHAP_NAME:
+	case ISCSI_BOOT_TGT_REV_CHAP_SECRET:
+		if (tgt->rev_chap_name_len)
+			rc = S_IRUGO;
+		break;
+	default:
+		break;
+	}
+
+	return rc;
+}
+
+static umode_t __init ibft_check_initiator_for(void *data, int type)
+{
+	struct ibft_kobject *entry = data;
+	struct ibft_initiator *init = entry->initiator;
+	umode_t rc = 0;
+
+	switch (type) {
+	case ISCSI_BOOT_INI_INDEX:
+	case ISCSI_BOOT_INI_FLAGS:
+		rc = S_IRUGO;
+		break;
+	case ISCSI_BOOT_INI_ISNS_SERVER:
+		if (memcmp(init->isns_server, nulls,
+			   sizeof(init->isns_server)))
+			rc = S_IRUGO;
+		break;
+	case ISCSI_BOOT_INI_SLP_SERVER:
+		if (memcmp(init->slp_server, nulls,
+			   sizeof(init->slp_server)))
+			rc = S_IRUGO;
+		break;
+	case ISCSI_BOOT_INI_PRI_RADIUS_SERVER:
+		if (memcmp(init->pri_radius_server, nulls,
+			   sizeof(init->pri_radius_server)))
+			rc = S_IRUGO;
+		break;
+	case ISCSI_BOOT_INI_SEC_RADIUS_SERVER:
+		if (memcmp(init->sec_radius_server, nulls,
+			   sizeof(init->sec_radius_server)))
+			rc = S_IRUGO;
+		break;
+	case ISCSI_BOOT_INI_INITIATOR_NAME:
+		if (init->initiator_name_len)
+			rc = S_IRUGO;
+		break;
+	default:
+		break;
+	}
+
+	return rc;
+}
+
+static void ibft_kobj_release(void *data)
+{
+	kfree(data);
+}
+
+/*
+ * Helper function for ibft_register_kobjects.
+ */
+static int __init ibft_create_kobject(struct acpi_table_ibft *header,
+				      struct ibft_hdr *hdr)
+{
+	struct iscsi_boot_kobj *boot_kobj = NULL;
+	struct ibft_kobject *ibft_kobj = NULL;
+	struct ibft_nic *nic = (struct ibft_nic *)hdr;
+	struct pci_dev *pci_dev;
+	int rc = 0;
+
+	ibft_kobj = kzalloc(sizeof(*ibft_kobj), GFP_KERNEL);
+	if (!ibft_kobj)
+		return -ENOMEM;
+
+	ibft_kobj->header = header;
+	ibft_kobj->hdr = hdr;
+
+	switch (hdr->id) {
+	case id_initiator:
+		rc = ibft_verify_hdr("initiator", hdr, id_initiator,
+				     sizeof(*ibft_kobj->initiator));
+		if (rc)
+			break;
+
+		boot_kobj = iscsi_boot_create_initiator(boot_kset, hdr->index,
+						ibft_kobj,
+						ibft_attr_show_initiator,
+						ibft_check_initiator_for,
+						ibft_kobj_release);
+		if (!boot_kobj) {
+			rc = -ENOMEM;
+			goto free_ibft_obj;
+		}
+		break;
+	case id_nic:
+		rc = ibft_verify_hdr("ethernet", hdr, id_nic,
+				     sizeof(*ibft_kobj->nic));
+		if (rc)
+			break;
+
+		boot_kobj = iscsi_boot_create_ethernet(boot_kset, hdr->index,
+						       ibft_kobj,
+						       ibft_attr_show_nic,
+						       ibft_check_nic_for,
+						       ibft_kobj_release);
+		if (!boot_kobj) {
+			rc = -ENOMEM;
+			goto free_ibft_obj;
+		}
+		break;
+	case id_target:
+		rc = ibft_verify_hdr("target", hdr, id_target,
+				     sizeof(*ibft_kobj->tgt));
+		if (rc)
+			break;
+
+		boot_kobj = iscsi_boot_create_target(boot_kset, hdr->index,
+						     ibft_kobj,
+						     ibft_attr_show_target,
+						     ibft_check_tgt_for,
+						     ibft_kobj_release);
+		if (!boot_kobj) {
+			rc = -ENOMEM;
+			goto free_ibft_obj;
+		}
+		break;
+	case id_reserved:
+	case id_control:
+	case id_extensions:
+		/* Fields which we don't support. Ignore them */
+		rc = 1;
+		break;
+	default:
+		printk(KERN_ERR "iBFT has unknown structure type (%d). " \
+				"Report this bug to %.6s!\n", hdr->id,
+				header->header.oem_id);
+		rc = 1;
+		break;
+	}
+
+	if (rc) {
+		/* Skip adding this kobject, but exit with non-fatal error. */
+		rc = 0;
+		goto free_ibft_obj;
+	}
+
+	if (hdr->id == id_nic) {
+		/*
+		* We don't search for the device in other domains than
+		* zero. This is because on x86 platforms the BIOS
+		* executes only devices which are in domain 0. Furthermore, the
+		* iBFT spec doesn't have a domain id field :-(
+		*/
+		pci_dev = pci_get_bus_and_slot((nic->pci_bdf & 0xff00) >> 8,
+					       (nic->pci_bdf & 0xff));
+		if (pci_dev) {
+			rc = sysfs_create_link(&boot_kobj->kobj,
+					       &pci_dev->dev.kobj, "device");
+			pci_dev_put(pci_dev);
+		}
+	}
+	return 0;
+
+free_ibft_obj:
+	kfree(ibft_kobj);
+	return rc;
+}
+
+/*
+ * Scan the IBFT table structure for the NIC and Target fields. When
+ * found add them on the passed-in list. We do not support the other
+ * fields at this point, so they are skipped.
+ */
+static int __init ibft_register_kobjects(struct acpi_table_ibft *header)
+{
+	struct ibft_control *control = NULL;
+	void *ptr, *end;
+	int rc = 0;
+	u16 offset;
+	u16 eot_offset;
+
+	control = (void *)header + sizeof(*header);
+	end = (void *)control + control->hdr.length;
+	eot_offset = (void *)header + header->header.length - (void *)control;
+	rc = ibft_verify_hdr("control", (struct ibft_hdr *)control, id_control,
+			     sizeof(*control));
+
+	/* iBFT table safety checking */
+	rc |= ((control->hdr.index) ? -ENODEV : 0);
+	if (rc) {
+		printk(KERN_ERR "iBFT error: Control header is invalid!\n");
+		return rc;
+	}
+	for (ptr = &control->initiator_off; ptr < end; ptr += sizeof(u16)) {
+		offset = *(u16 *)ptr;
+		if (offset && offset < header->header.length &&
+						offset < eot_offset) {
+			rc = ibft_create_kobject(header,
+						 (void *)header + offset);
+			if (rc)
+				break;
+		}
+	}
+
+	return rc;
+}
+
+static void ibft_unregister(void)
+{
+	struct iscsi_boot_kobj *boot_kobj, *tmp_kobj;
+	struct ibft_kobject *ibft_kobj;
+
+	list_for_each_entry_safe(boot_kobj, tmp_kobj,
+				 &boot_kset->kobj_list, list) {
+		ibft_kobj = boot_kobj->data;
+		if (ibft_kobj->hdr->id == id_nic)
+			sysfs_remove_link(&boot_kobj->kobj, "device");
+	};
+}
+
+static void ibft_cleanup(void)
+{
+	if (boot_kset) {
+		ibft_unregister();
+		iscsi_boot_destroy_kset(boot_kset);
+	}
+}
+
+static void __exit ibft_exit(void)
+{
+	ibft_cleanup();
+}
+
+#ifdef CONFIG_ACPI
+static const struct {
+	char *sign;
+} ibft_signs[] = {
+	/*
+	 * One spec says "IBFT", the other says "iBFT". We have to check
+	 * for both.
+	 */
+	{ ACPI_SIG_IBFT },
+	{ "iBFT" },
+};
+
+static void __init acpi_find_ibft_region(void)
+{
+	int i;
+	struct acpi_table_header *table = NULL;
+
+	if (acpi_disabled)
+		return;
+
+	for (i = 0; i < ARRAY_SIZE(ibft_signs) && !ibft_addr; i++) {
+		acpi_get_table(ibft_signs[i].sign, 0, &table);
+		ibft_addr = (struct acpi_table_ibft *)table;
+	}
+}
+#else
+static void __init acpi_find_ibft_region(void)
+{
+}
+#endif
+
+/*
+ * ibft_init() - creates sysfs tree entries for the iBFT data.
+ */
+static int __init ibft_init(void)
+{
+	int rc = 0;
+
+	/*
+	   As on UEFI systems the setup_arch()/find_ibft_region()
+	   is called before ACPI tables are parsed and it only does
+	   legacy finding.
+	*/
+	if (!ibft_addr)
+		acpi_find_ibft_region();
+
+	if (ibft_addr) {
+		pr_info("iBFT detected.\n");
+
+		rc = ibft_check_device();
+		if (rc)
+			return rc;
+
+		boot_kset = iscsi_boot_create_kset("ibft");
+		if (!boot_kset)
+			return -ENOMEM;
+
+		/* Scan the IBFT for data and register the kobjects. */
+		rc = ibft_register_kobjects(ibft_addr);
+		if (rc)
+			goto out_free;
+	} else
+		printk(KERN_INFO "No iBFT detected.\n");
+
+	return 0;
+
+out_free:
+	ibft_cleanup();
+	return rc;
+}
+
+module_init(ibft_init);
+module_exit(ibft_exit);
diff --git a/drivers/firmware/iscsi_ibft_find.c b/drivers/firmware/iscsi_ibft_find.c
new file mode 100644
index 00000000..4da4eb9a
--- /dev/null
+++ b/drivers/firmware/iscsi_ibft_find.c
@@ -0,0 +1,112 @@
+/*
+ *  Copyright 2007-2010 Red Hat, Inc.
+ *  by Peter Jones <pjones@redhat.com>
+ *  Copyright 2007 IBM, Inc.
+ *  by Konrad Rzeszutek <konradr@linux.vnet.ibm.com>
+ *  Copyright 2008
+ *  by Konrad Rzeszutek <ketuzsezr@darnok.org>
+ *
+ * This code finds the iSCSI Boot Format Table.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License v2.0 as published by
+ * the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/bootmem.h>
+#include <linux/blkdev.h>
+#include <linux/ctype.h>
+#include <linux/device.h>
+#include <linux/efi.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/limits.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/stat.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/acpi.h>
+#include <linux/iscsi_ibft.h>
+
+#include <asm/mmzone.h>
+
+/*
+ * Physical location of iSCSI Boot Format Table.
+ */
+struct acpi_table_ibft *ibft_addr;
+EXPORT_SYMBOL_GPL(ibft_addr);
+
+static const struct {
+	char *sign;
+} ibft_signs[] = {
+	{ "iBFT" },
+	{ "BIFT" },	/* Broadcom iSCSI Offload */
+};
+
+#define IBFT_SIGN_LEN 4
+#define IBFT_START 0x80000 /* 512kB */
+#define IBFT_END 0x100000 /* 1MB */
+#define VGA_MEM 0xA0000 /* VGA buffer */
+#define VGA_SIZE 0x20000 /* 128kB */
+
+static int __init find_ibft_in_mem(void)
+{
+	unsigned long pos;
+	unsigned int len = 0;
+	void *virt;
+	int i;
+
+	for (pos = IBFT_START; pos < IBFT_END; pos += 16) {
+		/* The table can't be inside the VGA BIOS reserved space,
+		 * so skip that area */
+		if (pos == VGA_MEM)
+			pos += VGA_SIZE;
+		virt = isa_bus_to_virt(pos);
+
+		for (i = 0; i < ARRAY_SIZE(ibft_signs); i++) {
+			if (memcmp(virt, ibft_signs[i].sign, IBFT_SIGN_LEN) ==
+			    0) {
+				unsigned long *addr =
+				    (unsigned long *)isa_bus_to_virt(pos + 4);
+				len = *addr;
+				/* if the length of the table extends past 1M,
+				 * the table cannot be valid. */
+				if (pos + len <= (IBFT_END-1)) {
+					ibft_addr = (struct acpi_table_ibft *)virt;
+					pr_info("iBFT found at 0x%lx.\n", pos);
+					goto done;
+				}
+			}
+		}
+	}
+done:
+	return len;
+}
+/*
+ * Routine used to find the iSCSI Boot Format Table. The logical
+ * kernel address is set in the ibft_addr global variable.
+ */
+unsigned long __init find_ibft_region(unsigned long *sizep)
+{
+	ibft_addr = NULL;
+
+	/* iBFT 1.03 section 1.4.3.1 mandates that UEFI machines will
+	 * only use ACPI for this */
+
+	if (!efi_enabled)
+		find_ibft_in_mem();
+
+	if (ibft_addr) {
+		*sizep = PAGE_ALIGN(ibft_addr->header.length);
+		return (u64)isa_virt_to_bus(ibft_addr);
+	}
+
+	*sizep = 0;
+	return 0;
+}
diff --git a/drivers/firmware/memmap.c b/drivers/firmware/memmap.c
new file mode 100644
index 00000000..adc07102
--- /dev/null
+++ b/drivers/firmware/memmap.c
@@ -0,0 +1,250 @@
+/*
+ * linux/drivers/firmware/memmap.c
+ *  Copyright (C) 2008 SUSE LINUX Products GmbH
+ *  by Bernhard Walle <bernhard.walle@gmx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License v2.0 as published by
+ * the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/string.h>
+#include <linux/firmware-map.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/bootmem.h>
+#include <linux/slab.h>
+
+/*
+ * Data types ------------------------------------------------------------------
+ */
+
+/*
+ * Firmware map entry. Because firmware memory maps are flat and not
+ * hierarchical, it's ok to organise them in a linked list. No parent
+ * information is necessary as for the resource tree.
+ */
+struct firmware_map_entry {
+	/*
+	 * start and end must be u64 rather than resource_size_t, because e820
+	 * resources can lie at addresses above 4G.
+	 */
+	u64			start;	/* start of the memory range */
+	u64			end;	/* end of the memory range (incl.) */
+	const char		*type;	/* type of the memory range */
+	struct list_head	list;	/* entry for the linked list */
+	struct kobject		kobj;   /* kobject for each entry */
+};
+
+/*
+ * Forward declarations --------------------------------------------------------
+ */
+static ssize_t memmap_attr_show(struct kobject *kobj,
+				struct attribute *attr, char *buf);
+static ssize_t start_show(struct firmware_map_entry *entry, char *buf);
+static ssize_t end_show(struct firmware_map_entry *entry, char *buf);
+static ssize_t type_show(struct firmware_map_entry *entry, char *buf);
+
+/*
+ * Static data -----------------------------------------------------------------
+ */
+
+struct memmap_attribute {
+	struct attribute attr;
+	ssize_t (*show)(struct firmware_map_entry *entry, char *buf);
+};
+
+static struct memmap_attribute memmap_start_attr = __ATTR_RO(start);
+static struct memmap_attribute memmap_end_attr   = __ATTR_RO(end);
+static struct memmap_attribute memmap_type_attr  = __ATTR_RO(type);
+
+/*
+ * These are default attributes that are added for every memmap entry.
+ */
+static struct attribute *def_attrs[] = {
+	&memmap_start_attr.attr,
+	&memmap_end_attr.attr,
+	&memmap_type_attr.attr,
+	NULL
+};
+
+static const struct sysfs_ops memmap_attr_ops = {
+	.show = memmap_attr_show,
+};
+
+static struct kobj_type memmap_ktype = {
+	.sysfs_ops	= &memmap_attr_ops,
+	.default_attrs	= def_attrs,
+};
+
+/*
+ * Registration functions ------------------------------------------------------
+ */
+
+/*
+ * Firmware memory map entries. No locking is needed because the
+ * firmware_map_add() and firmware_map_add_early() functions are called
+ * in firmware initialisation code in one single thread of execution.
+ */
+static LIST_HEAD(map_entries);
+
+/**
+ * firmware_map_add_entry() - Does the real work to add a firmware memmap entry.
+ * @start: Start of the memory range.
+ * @end:   End of the memory range (inclusive).
+ * @type:  Type of the memory range.
+ * @entry: Pre-allocated (either kmalloc() or bootmem allocator), uninitialised
+ *         entry.
+ *
+ * Common implementation of firmware_map_add() and firmware_map_add_early()
+ * which expects a pre-allocated struct firmware_map_entry.
+ **/
+static int firmware_map_add_entry(u64 start, u64 end,
+				  const char *type,
+				  struct firmware_map_entry *entry)
+{
+	BUG_ON(start > end);
+
+	entry->start = start;
+	entry->end = end;
+	entry->type = type;
+	INIT_LIST_HEAD(&entry->list);
+	kobject_init(&entry->kobj, &memmap_ktype);
+
+	list_add_tail(&entry->list, &map_entries);
+
+	return 0;
+}
+
+/*
+ * Add memmap entry on sysfs
+ */
+static int add_sysfs_fw_map_entry(struct firmware_map_entry *entry)
+{
+	static int map_entries_nr;
+	static struct kset *mmap_kset;
+
+	if (!mmap_kset) {
+		mmap_kset = kset_create_and_add("memmap", NULL, firmware_kobj);
+		if (!mmap_kset)
+			return -ENOMEM;
+	}
+
+	entry->kobj.kset = mmap_kset;
+	if (kobject_add(&entry->kobj, NULL, "%d", map_entries_nr++))
+		kobject_put(&entry->kobj);
+
+	return 0;
+}
+
+/**
+ * firmware_map_add_hotplug() - Adds a firmware mapping entry when we do
+ * memory hotplug.
+ * @start: Start of the memory range.
+ * @end:   End of the memory range (inclusive).
+ * @type:  Type of the memory range.
+ *
+ * Adds a firmware mapping entry. This function is for memory hotplug, it is
+ * similar to function firmware_map_add_early(). The only difference is that
+ * it will create the syfs entry dynamically.
+ *
+ * Returns 0 on success, or -ENOMEM if no memory could be allocated.
+ **/
+int __meminit firmware_map_add_hotplug(u64 start, u64 end, const char *type)
+{
+	struct firmware_map_entry *entry;
+
+	entry = kzalloc(sizeof(struct firmware_map_entry), GFP_ATOMIC);
+	if (!entry)
+		return -ENOMEM;
+
+	firmware_map_add_entry(start, end, type, entry);
+	/* create the memmap entry */
+	add_sysfs_fw_map_entry(entry);
+
+	return 0;
+}
+
+/**
+ * firmware_map_add_early() - Adds a firmware mapping entry.
+ * @start: Start of the memory range.
+ * @end:   End of the memory range (inclusive).
+ * @type:  Type of the memory range.
+ *
+ * Adds a firmware mapping entry. This function uses the bootmem allocator
+ * for memory allocation.
+ *
+ * That function must be called before late_initcall.
+ *
+ * Returns 0 on success, or -ENOMEM if no memory could be allocated.
+ **/
+int __init firmware_map_add_early(u64 start, u64 end, const char *type)
+{
+	struct firmware_map_entry *entry;
+
+	entry = alloc_bootmem(sizeof(struct firmware_map_entry));
+	if (WARN_ON(!entry))
+		return -ENOMEM;
+
+	return firmware_map_add_entry(start, end, type, entry);
+}
+
+/*
+ * Sysfs functions -------------------------------------------------------------
+ */
+
+static ssize_t start_show(struct firmware_map_entry *entry, char *buf)
+{
+	return snprintf(buf, PAGE_SIZE, "0x%llx\n",
+		(unsigned long long)entry->start);
+}
+
+static ssize_t end_show(struct firmware_map_entry *entry, char *buf)
+{
+	return snprintf(buf, PAGE_SIZE, "0x%llx\n",
+		(unsigned long long)entry->end);
+}
+
+static ssize_t type_show(struct firmware_map_entry *entry, char *buf)
+{
+	return snprintf(buf, PAGE_SIZE, "%s\n", entry->type);
+}
+
+#define to_memmap_attr(_attr) container_of(_attr, struct memmap_attribute, attr)
+#define to_memmap_entry(obj) container_of(obj, struct firmware_map_entry, kobj)
+
+static ssize_t memmap_attr_show(struct kobject *kobj,
+				struct attribute *attr, char *buf)
+{
+	struct firmware_map_entry *entry = to_memmap_entry(kobj);
+	struct memmap_attribute *memmap_attr = to_memmap_attr(attr);
+
+	return memmap_attr->show(entry, buf);
+}
+
+/*
+ * Initialises stuff and adds the entries in the map_entries list to
+ * sysfs. Important is that firmware_map_add() and firmware_map_add_early()
+ * must be called before late_initcall. That's just because that function
+ * is called as late_initcall() function, which means that if you call
+ * firmware_map_add() or firmware_map_add_early() afterwards, the entries
+ * are not added to sysfs.
+ */
+static int __init memmap_init(void)
+{
+	struct firmware_map_entry *entry;
+
+	list_for_each_entry(entry, &map_entries, list)
+		add_sysfs_fw_map_entry(entry);
+
+	return 0;
+}
+late_initcall(memmap_init);
+
diff --git a/drivers/firmware/pcdp.c b/drivers/firmware/pcdp.c
new file mode 100644
index 00000000..51e0e2d8
--- /dev/null
+++ b/drivers/firmware/pcdp.c
@@ -0,0 +1,136 @@
+/*
+ * Parse the EFI PCDP table to locate the console device.
+ *
+ * (c) Copyright 2002, 2003, 2004 Hewlett-Packard Development Company, L.P.
+ *	Khalid Aziz <khalid.aziz@hp.com>
+ *	Alex Williamson <alex.williamson@hp.com>
+ *	Bjorn Helgaas <bjorn.helgaas@hp.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/acpi.h>
+#include <linux/console.h>
+#include <linux/efi.h>
+#include <linux/serial.h>
+#include <linux/serial_8250.h>
+#include <asm/vga.h>
+#include "pcdp.h"
+
+static int __init
+setup_serial_console(struct pcdp_uart *uart)
+{
+#ifdef CONFIG_SERIAL_8250_CONSOLE
+	int mmio;
+	static char options[64], *p = options;
+	char parity;
+
+	mmio = (uart->addr.space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY);
+	p += sprintf(p, "uart8250,%s,0x%llx",
+		mmio ? "mmio" : "io", uart->addr.address);
+	if (uart->baud) {
+		p += sprintf(p, ",%llu", uart->baud);
+		if (uart->bits) {
+			switch (uart->parity) {
+			    case 0x2: parity = 'e'; break;
+			    case 0x3: parity = 'o'; break;
+			    default:  parity = 'n';
+			}
+			p += sprintf(p, "%c%d", parity, uart->bits);
+		}
+	}
+
+	add_preferred_console("uart", 8250, &options[9]);
+	return setup_early_serial8250_console(options);
+#else
+	return -ENODEV;
+#endif
+}
+
+static int __init
+setup_vga_console(struct pcdp_device *dev)
+{
+#if defined(CONFIG_VT) && defined(CONFIG_VGA_CONSOLE)
+	u8 *if_ptr;
+
+	if_ptr = ((u8 *)dev + sizeof(struct pcdp_device));
+	if (if_ptr[0] == PCDP_IF_PCI) {
+		struct pcdp_if_pci if_pci;
+
+		/* struct copy since ifptr might not be correctly aligned */
+
+		memcpy(&if_pci, if_ptr, sizeof(if_pci));
+
+		if (if_pci.trans & PCDP_PCI_TRANS_IOPORT)
+			vga_console_iobase = if_pci.ioport_tra;
+
+		if (if_pci.trans & PCDP_PCI_TRANS_MMIO)
+			vga_console_membase = if_pci.mmio_tra;
+	}
+
+	if (efi_mem_type(vga_console_membase + 0xA0000) == EFI_CONVENTIONAL_MEMORY) {
+		printk(KERN_ERR "PCDP: VGA selected, but frame buffer is not MMIO!\n");
+		return -ENODEV;
+	}
+
+	conswitchp = &vga_con;
+	printk(KERN_INFO "PCDP: VGA console\n");
+	return 0;
+#else
+	return -ENODEV;
+#endif
+}
+
+int __init
+efi_setup_pcdp_console(char *cmdline)
+{
+	struct pcdp *pcdp;
+	struct pcdp_uart *uart;
+	struct pcdp_device *dev, *end;
+	int i, serial = 0;
+	int rc = -ENODEV;
+
+	if (efi.hcdp == EFI_INVALID_TABLE_ADDR)
+		return -ENODEV;
+
+	pcdp = ioremap(efi.hcdp, 4096);
+	printk(KERN_INFO "PCDP: v%d at 0x%lx\n", pcdp->rev, efi.hcdp);
+
+	if (strstr(cmdline, "console=hcdp")) {
+		if (pcdp->rev < 3)
+			serial = 1;
+	} else if (strstr(cmdline, "console=")) {
+		printk(KERN_INFO "Explicit \"console=\"; ignoring PCDP\n");
+		goto out;
+	}
+
+	if (pcdp->rev < 3 && efi_uart_console_only())
+		serial = 1;
+
+	for (i = 0, uart = pcdp->uart; i < pcdp->num_uarts; i++, uart++) {
+		if (uart->flags & PCDP_UART_PRIMARY_CONSOLE || serial) {
+			if (uart->type == PCDP_CONSOLE_UART) {
+				rc = setup_serial_console(uart);
+				goto out;
+			}
+		}
+	}
+
+	end = (struct pcdp_device *) ((u8 *) pcdp + pcdp->length);
+	for (dev = (struct pcdp_device *) (pcdp->uart + pcdp->num_uarts);
+	     dev < end;
+	     dev = (struct pcdp_device *) ((u8 *) dev + dev->length)) {
+		if (dev->flags & PCDP_PRIMARY_CONSOLE) {
+			if (dev->type == PCDP_CONSOLE_VGA) {
+				rc = setup_vga_console(dev);
+				goto out;
+			}
+		}
+	}
+
+out:
+	iounmap(pcdp);
+	return rc;
+}
diff --git a/drivers/firmware/pcdp.h b/drivers/firmware/pcdp.h
new file mode 100644
index 00000000..e5530608
--- /dev/null
+++ b/drivers/firmware/pcdp.h
@@ -0,0 +1,111 @@
+/*
+ * Definitions for PCDP-defined console devices
+ *
+ * For DIG64_HCDPv10a_01.pdf and DIG64_PCDPv20.pdf (v1.0a and v2.0 resp.),
+ * please see <http://www.dig64.org/specifications/>
+ *
+ * (c) Copyright 2002, 2004 Hewlett-Packard Development Company, L.P.
+ *	Khalid Aziz <khalid.aziz@hp.com>
+ *	Bjorn Helgaas <bjorn.helgaas@hp.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define PCDP_CONSOLE			0
+#define PCDP_DEBUG			1
+#define PCDP_CONSOLE_OUTPUT		2
+#define PCDP_CONSOLE_INPUT		3
+
+#define PCDP_UART			(0 << 3)
+#define PCDP_VGA			(1 << 3)
+#define PCDP_USB			(2 << 3)
+
+/* pcdp_uart.type and pcdp_device.type */
+#define PCDP_CONSOLE_UART		(PCDP_UART | PCDP_CONSOLE)
+#define PCDP_DEBUG_UART			(PCDP_UART | PCDP_DEBUG)
+#define PCDP_CONSOLE_VGA		(PCDP_VGA  | PCDP_CONSOLE_OUTPUT)
+#define PCDP_CONSOLE_USB		(PCDP_USB  | PCDP_CONSOLE_INPUT)
+
+/* pcdp_uart.flags */
+#define PCDP_UART_EDGE_SENSITIVE	(1 << 0)
+#define PCDP_UART_ACTIVE_LOW		(1 << 1)
+#define PCDP_UART_PRIMARY_CONSOLE	(1 << 2)
+#define PCDP_UART_IRQ			(1 << 6) /* in pci_func for rev < 3 */
+#define PCDP_UART_PCI			(1 << 7) /* in pci_func for rev < 3 */
+
+struct pcdp_uart {
+	u8				type;
+	u8				bits;
+	u8				parity;
+	u8				stop_bits;
+	u8				pci_seg;
+	u8				pci_bus;
+	u8				pci_dev;
+	u8				pci_func;
+	u64				baud;
+	struct acpi_generic_address	addr;
+	u16				pci_dev_id;
+	u16				pci_vendor_id;
+	u32				gsi;
+	u32				clock_rate;
+	u8				pci_prog_intfc;
+	u8				flags;
+	u16				conout_index;
+	u32				reserved;
+} __attribute__((packed));
+
+#define PCDP_IF_PCI	1
+
+/* pcdp_if_pci.trans */
+#define PCDP_PCI_TRANS_IOPORT	0x02
+#define PCDP_PCI_TRANS_MMIO	0x01
+
+struct pcdp_if_pci {
+	u8			interconnect;
+	u8			reserved;
+	u16			length;
+	u8			segment;
+	u8			bus;
+	u8			dev;
+	u8			fun;
+	u16			dev_id;
+	u16			vendor_id;
+	u32			acpi_interrupt;
+	u64			mmio_tra;
+	u64			ioport_tra;
+	u8			flags;
+	u8			trans;
+} __attribute__((packed));
+
+struct pcdp_vga {
+	u8			count;		/* address space descriptors */
+} __attribute__((packed));
+
+/* pcdp_device.flags */
+#define PCDP_PRIMARY_CONSOLE	1
+
+struct pcdp_device {
+	u8			type;
+	u8			flags;
+	u16			length;
+	u16			efi_index;
+	/* next data is pcdp_if_pci or pcdp_if_acpi (not yet supported) */
+	/* next data is device specific type (currently only pcdp_vga) */
+} __attribute__((packed));
+
+struct pcdp {
+	u8			signature[4];
+	u32			length;
+	u8			rev;		/* PCDP v2.0 is rev 3 */
+	u8			chksum;
+	u8			oemid[6];
+	u8			oem_tabid[8];
+	u32			oem_rev;
+	u8			creator_id[4];
+	u32			creator_rev;
+	u32			num_uarts;
+	struct pcdp_uart	uart[0];	/* actual size is num_uarts */
+	/* remainder of table is pcdp_device structures */
+} __attribute__((packed));