diff options
Diffstat (limited to 'drivers/char/Kconfig')
| -rw-r--r-- | drivers/char/Kconfig | 687 |
1 files changed, 687 insertions, 0 deletions
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig new file mode 100644 index 00000000..ee63877e --- /dev/null +++ b/drivers/char/Kconfig @@ -0,0 +1,687 @@ +# +# Character device configuration +# + +menu "Character devices" + +source "drivers/tty/Kconfig" + +config DEVMEM + bool "Memory device driver" + default y + help + The memory driver provides two character devices, mem and kmem, which + provide access to the system's memory. The mem device is a view of + physical memory, and each byte in the device corresponds to the + matching physical address. The kmem device is the same as mem, but + the addresses correspond to the kernel's virtual address space rather + than physical memory. These devices are standard parts of a Linux + system and most users should say Y here. You might say N if very + security conscience or memory is tight. + +config DEVKMEM + bool "/dev/kmem virtual device support" + default y + help + Say Y here if you want to support the /dev/kmem device. The + /dev/kmem device is rarely used, but can be used for certain + kind of kernel debugging operations. + When in doubt, say "N". + +config STALDRV + bool "Stallion multiport serial support" + depends on SERIAL_NONSTANDARD + help + Stallion cards give you many serial ports. You would need something + like this to connect more than two modems to your Linux box, for + instance in order to become a dial-in server. If you say Y here, + you will be asked for your specific card model in the next + questions. Make sure to read <file:Documentation/serial/stallion.txt> + in this case. If you have never heard about all this, it's safe to + say N. + +config SGI_SNSC + bool "SGI Altix system controller communication support" + depends on (IA64_SGI_SN2 || IA64_GENERIC) + help + If you have an SGI Altix and you want to enable system + controller communication from user space (you want this!), + say Y. Otherwise, say N. + +config SGI_TIOCX + bool "SGI TIO CX driver support" + depends on (IA64_SGI_SN2 || IA64_GENERIC) + help + If you have an SGI Altix and you have fpga devices attached + to your TIO, say Y here, otherwise say N. + +config SGI_MBCS + tristate "SGI FPGA Core Services driver support" + depends on SGI_TIOCX + help + If you have an SGI Altix with an attached SABrick + say Y or M here, otherwise say N. + +source "drivers/tty/serial/Kconfig" + +config TTY_PRINTK + bool "TTY driver to output user messages via printk" + depends on EXPERT + default n + ---help--- + If you say Y here, the support for writing user messages (i.e. + console messages) via printk is available. + + The feature is useful to inline user messages with kernel + messages. + In order to use this feature, you should output user messages + to /dev/ttyprintk or redirect console to this TTY. + + If unsure, say N. + +config BFIN_OTP + tristate "Blackfin On-Chip OTP Memory Support" + depends on BLACKFIN && (BF51x || BF52x || BF54x) + default y + help + If you say Y here, you will get support for a character device + interface into the One Time Programmable memory pages that are + stored on the Blackfin processor. This will not get you access + to the secure memory pages however. You will need to write your + own secure code and reader for that. + + To compile this driver as a module, choose M here: the module + will be called bfin-otp. + + If unsure, it is safe to say Y. + +config BFIN_OTP_WRITE_ENABLE + bool "Enable writing support of OTP pages" + depends on BFIN_OTP + default n + help + If you say Y here, you will enable support for writing of the + OTP pages. This is dangerous by nature as you can only program + the pages once, so only enable this option when you actually + need it so as to not inadvertently clobber data. + + If unsure, say N. + +config PRINTER + tristate "Parallel printer support" + depends on PARPORT + ---help--- + If you intend to attach a printer to the parallel port of your Linux + box (as opposed to using a serial printer; if the connector at the + printer has 9 or 25 holes ["female"], then it's serial), say Y. + Also read the Printing-HOWTO, available from + <http://www.tldp.org/docs.html#howto>. + + It is possible to share one parallel port among several devices + (e.g. printer and ZIP drive) and it is safe to compile the + corresponding drivers into the kernel. + + To compile this driver as a module, choose M here and read + <file:Documentation/parport.txt>. The module will be called lp. + + If you have several parallel ports, you can specify which ports to + use with the "lp" kernel command line option. (Try "man bootparam" + or see the documentation of your boot loader (lilo or loadlin) about + how to pass options to the kernel at boot time.) The syntax of the + "lp" command line option can be found in <file:drivers/char/lp.c>. + + If you have more than 8 printers, you need to increase the LP_NO + macro in lp.c and the PARPORT_MAX macro in parport.h. + +config LP_CONSOLE + bool "Support for console on line printer" + depends on PRINTER + ---help--- + If you want kernel messages to be printed out as they occur, you + can have a console on the printer. This option adds support for + doing that; to actually get it to happen you need to pass the + option "console=lp0" to the kernel at boot time. + + If the printer is out of paper (or off, or unplugged, or too + busy..) the kernel will stall until the printer is ready again. + By defining CONSOLE_LP_STRICT to 0 (at your own risk) you + can make the kernel continue when this happens, + but it'll lose the kernel messages. + + If unsure, say N. + +config PPDEV + tristate "Support for user-space parallel port device drivers" + depends on PARPORT + ---help--- + Saying Y to this adds support for /dev/parport device nodes. This + is needed for programs that want portable access to the parallel + port, for instance deviceid (which displays Plug-and-Play device + IDs). + + This is the parallel port equivalent of SCSI generic support (sg). + It is safe to say N to this -- it is not needed for normal printing + or parallel port CD-ROM/disk support. + + To compile this driver as a module, choose M here: the + module will be called ppdev. + + If unsure, say N. + +source "drivers/tty/hvc/Kconfig" + +config VIRTIO_CONSOLE + tristate "Virtio console" + depends on VIRTIO + select HVC_DRIVER + help + Virtio console for use with lguest and other hypervisors. + + Also serves as a general-purpose serial device for data + transfer between the guest and host. Character devices at + /dev/vportNpn will be created when corresponding ports are + found, where N is the device number and n is the port number + within that device. If specified by the host, a sysfs + attribute called 'name' will be populated with a name for + the port which can be used by udev scripts to create a + symlink to the device. + +config IBM_BSR + tristate "IBM POWER Barrier Synchronization Register support" + depends on PPC_PSERIES + help + This devices exposes a hardware mechanism for fast synchronization + of threads across a large system which avoids bouncing a cacheline + between several cores on a system + +source "drivers/char/ipmi/Kconfig" + +config DS1620 + tristate "NetWinder thermometer support" + depends on ARCH_NETWINDER + help + Say Y here to include support for the thermal management hardware + found in the NetWinder. This driver allows the user to control the + temperature set points and to read the current temperature. + + It is also possible to say M here to build it as a module (ds1620) + It is recommended to be used on a NetWinder, but it is not a + necessity. + +config NWBUTTON + tristate "NetWinder Button" + depends on ARCH_NETWINDER + ---help--- + If you say Y here and create a character device node /dev/nwbutton + with major and minor numbers 10 and 158 ("man mknod"), then every + time the orange button is pressed a number of times, the number of + times the button was pressed will be written to that device. + + This is most useful for applications, as yet unwritten, which + perform actions based on how many times the button is pressed in a + row. + + Do not hold the button down for too long, as the driver does not + alter the behaviour of the hardware reset circuitry attached to the + button; it will still execute a hard reset if the button is held + down for longer than approximately five seconds. + + To compile this driver as a module, choose M here: the + module will be called nwbutton. + + Most people will answer Y to this question and "Reboot Using Button" + below to be able to initiate a system shutdown from the button. + +config NWBUTTON_REBOOT + bool "Reboot Using Button" + depends on NWBUTTON + help + If you say Y here, then you will be able to initiate a system + shutdown and reboot by pressing the orange button a number of times. + The number of presses to initiate the shutdown is two by default, + but this can be altered by modifying the value of NUM_PRESSES_REBOOT + in nwbutton.h and recompiling the driver or, if you compile the + driver as a module, you can specify the number of presses at load + time with "insmod button reboot_count=<something>". + +config NWFLASH + tristate "NetWinder flash support" + depends on ARCH_NETWINDER + ---help--- + If you say Y here and create a character device /dev/flash with + major 10 and minor 160 you can manipulate the flash ROM containing + the NetWinder firmware. Be careful as accidentally overwriting the + flash contents can render your computer unbootable. On no account + allow random users access to this device. :-) + + To compile this driver as a module, choose M here: the + module will be called nwflash. + + If you're not sure, say N. + +source "drivers/char/hw_random/Kconfig" + +config NVRAM + tristate "/dev/nvram support" + depends on ATARI || X86 || (ARM && RTC_DRV_CMOS) || GENERIC_NVRAM + ---help--- + If you say Y here and create a character special file /dev/nvram + with major number 10 and minor number 144 using mknod ("man mknod"), + you get read and write access to the extra bytes of non-volatile + memory in the real time clock (RTC), which is contained in every PC + and most Ataris. The actual number of bytes varies, depending on the + nvram in the system, but is usually 114 (128-14 for the RTC). + + This memory is conventionally called "CMOS RAM" on PCs and "NVRAM" + on Ataris. /dev/nvram may be used to view settings there, or to + change them (with some utility). It could also be used to frequently + save a few bits of very important data that may not be lost over + power-off and for which writing to disk is too insecure. Note + however that most NVRAM space in a PC belongs to the BIOS and you + should NEVER idly tamper with it. See Ralf Brown's interrupt list + for a guide to the use of CMOS bytes by your BIOS. + + On Atari machines, /dev/nvram is always configured and does not need + to be selected. + + To compile this driver as a module, choose M here: the + module will be called nvram. + +# +# These legacy RTC drivers just cause too many conflicts with the generic +# RTC framework ... let's not even try to coexist any more. +# +if RTC_LIB=n + +config RTC + tristate "Enhanced Real Time Clock Support (legacy PC RTC driver)" + depends on !PPC && !PARISC && !IA64 && !M68K && !SPARC && !FRV \ + && !ARM && !SUPERH && !S390 && !AVR32 && !BLACKFIN && !UML + ---help--- + If you say Y here and create a character special file /dev/rtc with + major number 10 and minor number 135 using mknod ("man mknod"), you + will get access to the real time clock (or hardware clock) built + into your computer. + + Every PC has such a clock built in. It can be used to generate + signals from as low as 1Hz up to 8192Hz, and can also be used + as a 24 hour alarm. It reports status information via the file + /proc/driver/rtc and its behaviour is set by various ioctls on + /dev/rtc. + + If you run Linux on a multiprocessor machine and said Y to + "Symmetric Multi Processing" above, you should say Y here to read + and set the RTC in an SMP compatible fashion. + + If you think you have a use for such a device (such as periodic data + sampling), then say Y here, and read <file:Documentation/rtc.txt> + for details. + + To compile this driver as a module, choose M here: the + module will be called rtc. + +config JS_RTC + tristate "Enhanced Real Time Clock Support" + depends on SPARC32 && PCI + ---help--- + If you say Y here and create a character special file /dev/rtc with + major number 10 and minor number 135 using mknod ("man mknod"), you + will get access to the real time clock (or hardware clock) built + into your computer. + + Every PC has such a clock built in. It can be used to generate + signals from as low as 1Hz up to 8192Hz, and can also be used + as a 24 hour alarm. It reports status information via the file + /proc/driver/rtc and its behaviour is set by various ioctls on + /dev/rtc. + + If you think you have a use for such a device (such as periodic data + sampling), then say Y here, and read <file:Documentation/rtc.txt> + for details. + + To compile this driver as a module, choose M here: the + module will be called js-rtc. + +config GEN_RTC + tristate "Generic /dev/rtc emulation" + depends on RTC!=y && !IA64 && !ARM && !M32R && !MIPS && !SPARC && !FRV && !S390 && !SUPERH && !AVR32 && !BLACKFIN && !UML + ---help--- + If you say Y here and create a character special file /dev/rtc with + major number 10 and minor number 135 using mknod ("man mknod"), you + will get access to the real time clock (or hardware clock) built + into your computer. + + It reports status information via the file /proc/driver/rtc and its + behaviour is set by various ioctls on /dev/rtc. If you enable the + "extended RTC operation" below it will also provide an emulation + for RTC_UIE which is required by some programs and may improve + precision in some cases. + + To compile this driver as a module, choose M here: the + module will be called genrtc. + +config GEN_RTC_X + bool "Extended RTC operation" + depends on GEN_RTC + help + Provides an emulation for RTC_UIE which is required by some programs + and may improve precision of the generic RTC support in some cases. + +config EFI_RTC + bool "EFI Real Time Clock Services" + depends on IA64 + +config DS1302 + tristate "DS1302 RTC support" + depends on M32R && (PLAT_M32700UT || PLAT_OPSPUT) + help + If you say Y here and create a character special file /dev/rtc with + major number 121 and minor number 0 using mknod ("man mknod"), you + will get access to the real time clock (or hardware clock) built + into your computer. + +endif # RTC_LIB + +config PWM_WMT + tristate "WMT PWM support" + depends on ARCH_WMT + ---help--- + Say Y here if you want to enable PWM on WMT application processor. + + To compile this driver as a module, choose M here: the + module will be called wmt_pwm + +config WMT_GPIO + tristate "WMT GPIO support" + depends on ARCH_WMT + default y + ---help--- + Say Y here if you want to enable WMT GPIO . + + To compile this driver as a module, choose M here + +config WMT_VIBRATOR + tristate "WMT vibrator support" + depends on ARCH_WMT + default y + ---help--- + Say Y here if you want to enable vibrator driver. + + To compile this driver as a module, choose M here: the + module will be called wmt_vibrate + +config WMT_EFUSE + tristate "WMT eFuse support" + depends on ARCH_WMT + default m + ---help--- + Say Y or M here if you want to enable WMT eFuse in WMT SOC. + + To compile this driver as a module, choose M here: the + module will be called s_wmt_efuse + +config CHARGE_SMB358 + tristate "WMT SMB358 Charging-IC support" + depends on ARCH_WMT + default n + ---help--- + Say Y here if you want to enable SMB358 charging IC driver. + + To compile this driver as a module, choose M here: the + module will be called wmt_vibrate +config WMT_EFUSE_STUB + tristate "WMT eFuse stub function support" + depends on ARCH_WMT + default y + ---help--- + Support eFuse stub functions. + +config DTLK + tristate "Double Talk PC internal speech card support" + depends on ISA + help + This driver is for the DoubleTalk PC, a speech synthesizer + manufactured by RC Systems (<http://www.rcsys.com/>). It is also + called the `internal DoubleTalk'. + + To compile this driver as a module, choose M here: the + module will be called dtlk. + +config XILINX_HWICAP + tristate "Xilinx HWICAP Support" + depends on XILINX_VIRTEX || MICROBLAZE + help + This option enables support for Xilinx Internal Configuration + Access Port (ICAP) driver. The ICAP is used on Xilinx Virtex + FPGA platforms to partially reconfigure the FPGA at runtime. + + If unsure, say N. + +config R3964 + tristate "Siemens R3964 line discipline" + ---help--- + This driver allows synchronous communication with devices using the + Siemens R3964 packet protocol. Unless you are dealing with special + hardware like PLCs, you are unlikely to need this. + + To compile this driver as a module, choose M here: the + module will be called n_r3964. + + If unsure, say N. + +config APPLICOM + tristate "Applicom intelligent fieldbus card support" + depends on PCI + ---help--- + This driver provides the kernel-side support for the intelligent + fieldbus cards made by Applicom International. More information + about these cards can be found on the WWW at the address + <http://www.applicom-int.com/>, or by email from David Woodhouse + <dwmw2@infradead.org>. + + To compile this driver as a module, choose M here: the + module will be called applicom. + + If unsure, say N. + +config SONYPI + tristate "Sony Vaio Programmable I/O Control Device support (EXPERIMENTAL)" + depends on EXPERIMENTAL && X86 && PCI && INPUT && !64BIT + ---help--- + This driver enables access to the Sony Programmable I/O Control + Device which can be found in many (all ?) Sony Vaio laptops. + + If you have one of those laptops, read + <file:Documentation/laptops/sonypi.txt>, and say Y or M here. + + To compile this driver as a module, choose M here: the + module will be called sonypi. + +config GPIO_TB0219 + tristate "TANBAC TB0219 GPIO support" + depends on TANBAC_TB022X + select GPIO_VR41XX + +source "drivers/char/pcmcia/Kconfig" + +config MWAVE + tristate "ACP Modem (Mwave) support" + depends on X86 + select SERIAL_8250 + ---help--- + The ACP modem (Mwave) for Linux is a WinModem. It is composed of a + kernel driver and a user level application. Together these components + support direct attachment to public switched telephone networks (PSTNs) + and support selected world wide countries. + + This version of the ACP Modem driver supports the IBM Thinkpad 600E, + 600, and 770 that include on board ACP modem hardware. + + The modem also supports the standard communications port interface + (ttySx) and is compatible with the Hayes AT Command Set. + + The user level application needed to use this driver can be found at + the IBM Linux Technology Center (LTC) web site: + <http://www.ibm.com/linux/ltc/>. + + If you own one of the above IBM Thinkpads which has the Mwave chipset + in it, say Y. + + To compile this driver as a module, choose M here: the + module will be called mwave. + +config SCx200_GPIO + tristate "NatSemi SCx200 GPIO Support" + depends on SCx200 + select NSC_GPIO + help + Give userspace access to the GPIO pins on the National + Semiconductor SCx200 processors. + + If compiled as a module, it will be called scx200_gpio. + +config PC8736x_GPIO + tristate "NatSemi PC8736x GPIO Support" + depends on X86_32 && !UML + default SCx200_GPIO # mostly N + select NSC_GPIO # needed for support routines + help + Give userspace access to the GPIO pins on the National + Semiconductor PC-8736x (x=[03456]) SuperIO chip. The chip + has multiple functional units, inc several managed by + hwmon/pc87360 driver. Tested with PC-87366 + + If compiled as a module, it will be called pc8736x_gpio. + +config NSC_GPIO + tristate "NatSemi Base GPIO Support" + depends on X86_32 + # selected by SCx200_GPIO and PC8736x_GPIO + # what about 2 selectors differing: m != y + help + Common support used (and needed) by scx200_gpio and + pc8736x_gpio drivers. If those drivers are built as + modules, this one will be too, named nsc_gpio + +config RAW_DRIVER + tristate "RAW driver (/dev/raw/rawN)" + depends on BLOCK + help + The raw driver permits block devices to be bound to /dev/raw/rawN. + Once bound, I/O against /dev/raw/rawN uses efficient zero-copy I/O. + See the raw(8) manpage for more details. + + Applications should preferably open the device (eg /dev/hda1) + with the O_DIRECT flag. + +config MAX_RAW_DEVS + int "Maximum number of RAW devices to support (1-65536)" + depends on RAW_DRIVER + default "256" + help + The maximum number of RAW devices that are supported. + Default is 256. Increase this number in case you need lots of + raw devices. + +config HPET + bool "HPET - High Precision Event Timer" if (X86 || IA64) + default n + depends on ACPI + help + If you say Y here, you will have a miscdevice named "/dev/hpet/". Each + open selects one of the timers supported by the HPET. The timers are + non-periodic and/or periodic. + +config HPET_MMAP + bool "Allow mmap of HPET" + default y + depends on HPET + help + If you say Y here, user applications will be able to mmap + the HPET registers. + + In some hardware implementations, the page containing HPET + registers may also contain other things that shouldn't be + exposed to the user. If this applies to your hardware, + say N here. + +config HANGCHECK_TIMER + tristate "Hangcheck timer" + depends on X86 || IA64 || PPC64 || S390 + help + The hangcheck-timer module detects when the system has gone + out to lunch past a certain margin. It can reboot the system + or merely print a warning. + +config MMTIMER + tristate "MMTIMER Memory mapped RTC for SGI Altix" + depends on IA64_GENERIC || IA64_SGI_SN2 + default y + help + The mmtimer device allows direct userspace access to the + Altix system timer. + +config UV_MMTIMER + tristate "UV_MMTIMER Memory mapped RTC for SGI UV" + depends on X86_UV + default m + help + The uv_mmtimer device allows direct userspace access to the + UV system timer. + +source "drivers/char/tpm/Kconfig" + +config TELCLOCK + tristate "Telecom clock driver for ATCA SBC" + depends on EXPERIMENTAL && X86 + default n + help + The telecom clock device is specific to the MPCBL0010 and MPCBL0050 + ATCA computers and allows direct userspace access to the + configuration of the telecom clock configuration settings. This + device is used for hardware synchronization across the ATCA backplane + fabric. Upon loading, the driver exports a sysfs directory, + /sys/devices/platform/telco_clock, with a number of files for + controlling the behavior of this hardware. + +config DEVPORT + bool + depends on !M68K + depends on ISA || PCI + default y + +config DCC_TTY + tristate "DCC tty driver" + depends on ARM + +source "drivers/s390/char/Kconfig" + +config RAMOOPS + tristate "Log panic/oops to a RAM buffer" + depends on HAS_IOMEM + default n + help + This enables panic and oops messages to be logged to a circular + buffer in RAM where it can be read back at some later point. + +config MSM_SMD_PKT + bool "Enable device interface for some SMD packet ports" + default n + depends on MSM_SMD + help + Enables userspace clients to read and write to some packet SMD + ports via device interface for MSM chipset. + +config TILE_SROM + bool "Character-device access via hypervisor to the Tilera SPI ROM" + depends on TILE + default y + ---help--- + This device provides character-level read-write access + to the SROM, typically via the "0", "1", and "2" devices + in /dev/srom/. The Tilera hypervisor makes the flash + device appear much like a simple EEPROM, and knows + how to partition a single ROM for multiple purposes. + +endmenu + |