diff options
Diffstat (limited to 'drivers/ata/pata_legacy.c')
| -rw-r--r-- | drivers/ata/pata_legacy.c | 1277 |
1 files changed, 1277 insertions, 0 deletions
diff --git a/drivers/ata/pata_legacy.c b/drivers/ata/pata_legacy.c new file mode 100644 index 00000000..4fe9d213 --- /dev/null +++ b/drivers/ata/pata_legacy.c @@ -0,0 +1,1277 @@ +/* + * pata-legacy.c - Legacy port PATA/SATA controller driver. + * Copyright 2005/2006 Red Hat, all rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + * + * An ATA driver for the legacy ATA ports. + * + * Data Sources: + * Opti 82C465/82C611 support: Data sheets at opti-inc.com + * HT6560 series: + * Promise 20230/20620: + * http://www.ryston.cz/petr/vlb/pdc20230b.html + * http://www.ryston.cz/petr/vlb/pdc20230c.html + * http://www.ryston.cz/petr/vlb/pdc20630.html + * QDI65x0: + * http://www.ryston.cz/petr/vlb/qd6500.html + * http://www.ryston.cz/petr/vlb/qd6580.html + * + * QDI65x0 probe code based on drivers/ide/legacy/qd65xx.c + * Rewritten from the work of Colten Edwards <pje120@cs.usask.ca> by + * Samuel Thibault <samuel.thibault@ens-lyon.org> + * + * Unsupported but docs exist: + * Appian/Adaptec AIC25VL01/Cirrus Logic PD7220 + * + * This driver handles legacy (that is "ISA/VLB side") IDE ports found + * on PC class systems. There are three hybrid devices that are exceptions + * The Cyrix 5510/5520 where a pre SFF ATA device is on the bridge and + * the MPIIX where the tuning is PCI side but the IDE is "ISA side". + * + * Specific support is included for the ht6560a/ht6560b/opti82c611a/ + * opti82c465mv/promise 20230c/20630/qdi65x0/winbond83759A + * + * Support for the Winbond 83759A when operating in advanced mode. + * Multichip mode is not currently supported. + * + * Use the autospeed and pio_mask options with: + * Appian ADI/2 aka CLPD7220 or AIC25VL01. + * Use the jumpers, autospeed and set pio_mask to the mode on the jumpers with + * Goldstar GM82C711, PIC-1288A-125, UMC 82C871F, Winbond W83759, + * Winbond W83759A, Promise PDC20230-B + * + * For now use autospeed and pio_mask as above with the W83759A. This may + * change. + * + */ + +#include <linux/async.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/blkdev.h> +#include <linux/delay.h> +#include <scsi/scsi_host.h> +#include <linux/ata.h> +#include <linux/libata.h> +#include <linux/platform_device.h> + +#define DRV_NAME "pata_legacy" +#define DRV_VERSION "0.6.5" + +#define NR_HOST 6 + +static int all; +module_param(all, int, 0444); +MODULE_PARM_DESC(all, "Grab all legacy port devices, even if PCI(0=off, 1=on)"); + +enum controller { + BIOS = 0, + SNOOP = 1, + PDC20230 = 2, + HT6560A = 3, + HT6560B = 4, + OPTI611A = 5, + OPTI46X = 6, + QDI6500 = 7, + QDI6580 = 8, + QDI6580DP = 9, /* Dual channel mode is different */ + W83759A = 10, + + UNKNOWN = -1 +}; + +struct legacy_data { + unsigned long timing; + u8 clock[2]; + u8 last; + int fast; + enum controller type; + struct platform_device *platform_dev; +}; + +struct legacy_probe { + unsigned char *name; + unsigned long port; + unsigned int irq; + unsigned int slot; + enum controller type; + unsigned long private; +}; + +struct legacy_controller { + const char *name; + struct ata_port_operations *ops; + unsigned int pio_mask; + unsigned int flags; + unsigned int pflags; + int (*setup)(struct platform_device *, struct legacy_probe *probe, + struct legacy_data *data); +}; + +static int legacy_port[NR_HOST] = { 0x1f0, 0x170, 0x1e8, 0x168, 0x1e0, 0x160 }; + +static struct legacy_probe probe_list[NR_HOST]; +static struct legacy_data legacy_data[NR_HOST]; +static struct ata_host *legacy_host[NR_HOST]; +static int nr_legacy_host; + + +static int probe_all; /* Set to check all ISA port ranges */ +static int ht6560a; /* HT 6560A on primary 1, second 2, both 3 */ +static int ht6560b; /* HT 6560A on primary 1, second 2, both 3 */ +static int opti82c611a; /* Opti82c611A on primary 1, sec 2, both 3 */ +static int opti82c46x; /* Opti 82c465MV present(pri/sec autodetect) */ +static int autospeed; /* Chip present which snoops speed changes */ +static int pio_mask = ATA_PIO4; /* PIO range for autospeed devices */ +static int iordy_mask = 0xFFFFFFFF; /* Use iordy if available */ + +/* Set to probe QDI controllers */ +#ifdef CONFIG_PATA_QDI_MODULE +static int qdi = 1; +#else +static int qdi; +#endif + +#ifdef CONFIG_PATA_WINBOND_VLB_MODULE +static int winbond = 1; /* Set to probe Winbond controllers, + give I/O port if non standard */ +#else +static int winbond; /* Set to probe Winbond controllers, + give I/O port if non standard */ +#endif + +/** + * legacy_probe_add - Add interface to probe list + * @port: Controller port + * @irq: IRQ number + * @type: Controller type + * @private: Controller specific info + * + * Add an entry into the probe list for ATA controllers. This is used + * to add the default ISA slots and then to build up the table + * further according to other ISA/VLB/Weird device scans + * + * An I/O port list is used to keep ordering stable and sane, as we + * don't have any good way to talk about ordering otherwise + */ + +static int legacy_probe_add(unsigned long port, unsigned int irq, + enum controller type, unsigned long private) +{ + struct legacy_probe *lp = &probe_list[0]; + int i; + struct legacy_probe *free = NULL; + + for (i = 0; i < NR_HOST; i++) { + if (lp->port == 0 && free == NULL) + free = lp; + /* Matching port, or the correct slot for ordering */ + if (lp->port == port || legacy_port[i] == port) { + free = lp; + break; + } + lp++; + } + if (free == NULL) { + printk(KERN_ERR "pata_legacy: Too many interfaces.\n"); + return -1; + } + /* Fill in the entry for later probing */ + free->port = port; + free->irq = irq; + free->type = type; + free->private = private; + return 0; +} + + +/** + * legacy_set_mode - mode setting + * @link: IDE link + * @unused: Device that failed when error is returned + * + * Use a non standard set_mode function. We don't want to be tuned. + * + * The BIOS configured everything. Our job is not to fiddle. Just use + * whatever PIO the hardware is using and leave it at that. When we + * get some kind of nice user driven API for control then we can + * expand on this as per hdparm in the base kernel. + */ + +static int legacy_set_mode(struct ata_link *link, struct ata_device **unused) +{ + struct ata_device *dev; + + ata_for_each_dev(dev, link, ENABLED) { + ata_dev_info(dev, "configured for PIO\n"); + dev->pio_mode = XFER_PIO_0; + dev->xfer_mode = XFER_PIO_0; + dev->xfer_shift = ATA_SHIFT_PIO; + dev->flags |= ATA_DFLAG_PIO; + } + return 0; +} + +static struct scsi_host_template legacy_sht = { + ATA_PIO_SHT(DRV_NAME), +}; + +static const struct ata_port_operations legacy_base_port_ops = { + .inherits = &ata_sff_port_ops, + .cable_detect = ata_cable_40wire, +}; + +/* + * These ops are used if the user indicates the hardware + * snoops the commands to decide on the mode and handles the + * mode selection "magically" itself. Several legacy controllers + * do this. The mode range can be set if it is not 0x1F by setting + * pio_mask as well. + */ + +static struct ata_port_operations simple_port_ops = { + .inherits = &legacy_base_port_ops, + .sff_data_xfer = ata_sff_data_xfer_noirq, +}; + +static struct ata_port_operations legacy_port_ops = { + .inherits = &legacy_base_port_ops, + .sff_data_xfer = ata_sff_data_xfer_noirq, + .set_mode = legacy_set_mode, +}; + +/* + * Promise 20230C and 20620 support + * + * This controller supports PIO0 to PIO2. We set PIO timings + * conservatively to allow for 50MHz Vesa Local Bus. The 20620 DMA + * support is weird being DMA to controller and PIO'd to the host + * and not supported. + */ + +static void pdc20230_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + int tries = 5; + int pio = adev->pio_mode - XFER_PIO_0; + u8 rt; + unsigned long flags; + + /* Safe as UP only. Force I/Os to occur together */ + + local_irq_save(flags); + + /* Unlock the control interface */ + do { + inb(0x1F5); + outb(inb(0x1F2) | 0x80, 0x1F2); + inb(0x1F2); + inb(0x3F6); + inb(0x3F6); + inb(0x1F2); + inb(0x1F2); + } + while ((inb(0x1F2) & 0x80) && --tries); + + local_irq_restore(flags); + + outb(inb(0x1F4) & 0x07, 0x1F4); + + rt = inb(0x1F3); + rt &= 0x07 << (3 * adev->devno); + if (pio) + rt |= (1 + 3 * pio) << (3 * adev->devno); + + udelay(100); + outb(inb(0x1F2) | 0x01, 0x1F2); + udelay(100); + inb(0x1F5); + +} + +static unsigned int pdc_data_xfer_vlb(struct ata_device *dev, + unsigned char *buf, unsigned int buflen, int rw) +{ + int slop = buflen & 3; + struct ata_port *ap = dev->link->ap; + + /* 32bit I/O capable *and* we need to write a whole number of dwords */ + if (ata_id_has_dword_io(dev->id) && (slop == 0 || slop == 3) + && (ap->pflags & ATA_PFLAG_PIO32)) { + unsigned long flags; + + local_irq_save(flags); + + /* Perform the 32bit I/O synchronization sequence */ + ioread8(ap->ioaddr.nsect_addr); + ioread8(ap->ioaddr.nsect_addr); + ioread8(ap->ioaddr.nsect_addr); + + /* Now the data */ + if (rw == READ) + ioread32_rep(ap->ioaddr.data_addr, buf, buflen >> 2); + else + iowrite32_rep(ap->ioaddr.data_addr, buf, buflen >> 2); + + if (unlikely(slop)) { + __le32 pad; + if (rw == READ) { + pad = cpu_to_le32(ioread32(ap->ioaddr.data_addr)); + memcpy(buf + buflen - slop, &pad, slop); + } else { + memcpy(&pad, buf + buflen - slop, slop); + iowrite32(le32_to_cpu(pad), ap->ioaddr.data_addr); + } + buflen += 4 - slop; + } + local_irq_restore(flags); + } else + buflen = ata_sff_data_xfer_noirq(dev, buf, buflen, rw); + + return buflen; +} + +static struct ata_port_operations pdc20230_port_ops = { + .inherits = &legacy_base_port_ops, + .set_piomode = pdc20230_set_piomode, + .sff_data_xfer = pdc_data_xfer_vlb, +}; + +/* + * Holtek 6560A support + * + * This controller supports PIO0 to PIO2 (no IORDY even though higher + * timings can be loaded). + */ + +static void ht6560a_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + u8 active, recover; + struct ata_timing t; + + /* Get the timing data in cycles. For now play safe at 50Mhz */ + ata_timing_compute(adev, adev->pio_mode, &t, 20000, 1000); + + active = clamp_val(t.active, 2, 15); + recover = clamp_val(t.recover, 4, 15); + + inb(0x3E6); + inb(0x3E6); + inb(0x3E6); + inb(0x3E6); + + iowrite8(recover << 4 | active, ap->ioaddr.device_addr); + ioread8(ap->ioaddr.status_addr); +} + +static struct ata_port_operations ht6560a_port_ops = { + .inherits = &legacy_base_port_ops, + .set_piomode = ht6560a_set_piomode, +}; + +/* + * Holtek 6560B support + * + * This controller supports PIO0 to PIO4. We honour the BIOS/jumper FIFO + * setting unless we see an ATAPI device in which case we force it off. + * + * FIXME: need to implement 2nd channel support. + */ + +static void ht6560b_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + u8 active, recover; + struct ata_timing t; + + /* Get the timing data in cycles. For now play safe at 50Mhz */ + ata_timing_compute(adev, adev->pio_mode, &t, 20000, 1000); + + active = clamp_val(t.active, 2, 15); + recover = clamp_val(t.recover, 2, 16) & 0x0F; + + inb(0x3E6); + inb(0x3E6); + inb(0x3E6); + inb(0x3E6); + + iowrite8(recover << 4 | active, ap->ioaddr.device_addr); + + if (adev->class != ATA_DEV_ATA) { + u8 rconf = inb(0x3E6); + if (rconf & 0x24) { + rconf &= ~0x24; + outb(rconf, 0x3E6); + } + } + ioread8(ap->ioaddr.status_addr); +} + +static struct ata_port_operations ht6560b_port_ops = { + .inherits = &legacy_base_port_ops, + .set_piomode = ht6560b_set_piomode, +}; + +/* + * Opti core chipset helpers + */ + +/** + * opti_syscfg - read OPTI chipset configuration + * @reg: Configuration register to read + * + * Returns the value of an OPTI system board configuration register. + */ + +static u8 opti_syscfg(u8 reg) +{ + unsigned long flags; + u8 r; + + /* Uniprocessor chipset and must force cycles adjancent */ + local_irq_save(flags); + outb(reg, 0x22); + r = inb(0x24); + local_irq_restore(flags); + return r; +} + +/* + * Opti 82C611A + * + * This controller supports PIO0 to PIO3. + */ + +static void opti82c611a_set_piomode(struct ata_port *ap, + struct ata_device *adev) +{ + u8 active, recover, setup; + struct ata_timing t; + struct ata_device *pair = ata_dev_pair(adev); + int clock; + int khz[4] = { 50000, 40000, 33000, 25000 }; + u8 rc; + + /* Enter configuration mode */ + ioread16(ap->ioaddr.error_addr); + ioread16(ap->ioaddr.error_addr); + iowrite8(3, ap->ioaddr.nsect_addr); + + /* Read VLB clock strapping */ + clock = 1000000000 / khz[ioread8(ap->ioaddr.lbah_addr) & 0x03]; + + /* Get the timing data in cycles */ + ata_timing_compute(adev, adev->pio_mode, &t, clock, 1000); + + /* Setup timing is shared */ + if (pair) { + struct ata_timing tp; + ata_timing_compute(pair, pair->pio_mode, &tp, clock, 1000); + + ata_timing_merge(&t, &tp, &t, ATA_TIMING_SETUP); + } + + active = clamp_val(t.active, 2, 17) - 2; + recover = clamp_val(t.recover, 1, 16) - 1; + setup = clamp_val(t.setup, 1, 4) - 1; + + /* Select the right timing bank for write timing */ + rc = ioread8(ap->ioaddr.lbal_addr); + rc &= 0x7F; + rc |= (adev->devno << 7); + iowrite8(rc, ap->ioaddr.lbal_addr); + + /* Write the timings */ + iowrite8(active << 4 | recover, ap->ioaddr.error_addr); + + /* Select the right bank for read timings, also + load the shared timings for address */ + rc = ioread8(ap->ioaddr.device_addr); + rc &= 0xC0; + rc |= adev->devno; /* Index select */ + rc |= (setup << 4) | 0x04; + iowrite8(rc, ap->ioaddr.device_addr); + + /* Load the read timings */ + iowrite8(active << 4 | recover, ap->ioaddr.data_addr); + + /* Ensure the timing register mode is right */ + rc = ioread8(ap->ioaddr.lbal_addr); + rc &= 0x73; + rc |= 0x84; + iowrite8(rc, ap->ioaddr.lbal_addr); + + /* Exit command mode */ + iowrite8(0x83, ap->ioaddr.nsect_addr); +} + + +static struct ata_port_operations opti82c611a_port_ops = { + .inherits = &legacy_base_port_ops, + .set_piomode = opti82c611a_set_piomode, +}; + +/* + * Opti 82C465MV + * + * This controller supports PIO0 to PIO3. Unlike the 611A the MVB + * version is dual channel but doesn't have a lot of unique registers. + */ + +static void opti82c46x_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + u8 active, recover, setup; + struct ata_timing t; + struct ata_device *pair = ata_dev_pair(adev); + int clock; + int khz[4] = { 50000, 40000, 33000, 25000 }; + u8 rc; + u8 sysclk; + + /* Get the clock */ + sysclk = opti_syscfg(0xAC) & 0xC0; /* BIOS set */ + + /* Enter configuration mode */ + ioread16(ap->ioaddr.error_addr); + ioread16(ap->ioaddr.error_addr); + iowrite8(3, ap->ioaddr.nsect_addr); + + /* Read VLB clock strapping */ + clock = 1000000000 / khz[sysclk]; + + /* Get the timing data in cycles */ + ata_timing_compute(adev, adev->pio_mode, &t, clock, 1000); + + /* Setup timing is shared */ + if (pair) { + struct ata_timing tp; + ata_timing_compute(pair, pair->pio_mode, &tp, clock, 1000); + + ata_timing_merge(&t, &tp, &t, ATA_TIMING_SETUP); + } + + active = clamp_val(t.active, 2, 17) - 2; + recover = clamp_val(t.recover, 1, 16) - 1; + setup = clamp_val(t.setup, 1, 4) - 1; + + /* Select the right timing bank for write timing */ + rc = ioread8(ap->ioaddr.lbal_addr); + rc &= 0x7F; + rc |= (adev->devno << 7); + iowrite8(rc, ap->ioaddr.lbal_addr); + + /* Write the timings */ + iowrite8(active << 4 | recover, ap->ioaddr.error_addr); + + /* Select the right bank for read timings, also + load the shared timings for address */ + rc = ioread8(ap->ioaddr.device_addr); + rc &= 0xC0; + rc |= adev->devno; /* Index select */ + rc |= (setup << 4) | 0x04; + iowrite8(rc, ap->ioaddr.device_addr); + + /* Load the read timings */ + iowrite8(active << 4 | recover, ap->ioaddr.data_addr); + + /* Ensure the timing register mode is right */ + rc = ioread8(ap->ioaddr.lbal_addr); + rc &= 0x73; + rc |= 0x84; + iowrite8(rc, ap->ioaddr.lbal_addr); + + /* Exit command mode */ + iowrite8(0x83, ap->ioaddr.nsect_addr); + + /* We need to know this for quad device on the MVB */ + ap->host->private_data = ap; +} + +/** + * opt82c465mv_qc_issue - command issue + * @qc: command pending + * + * Called when the libata layer is about to issue a command. We wrap + * this interface so that we can load the correct ATA timings. The + * MVB has a single set of timing registers and these are shared + * across channels. As there are two registers we really ought to + * track the last two used values as a sort of register window. For + * now we just reload on a channel switch. On the single channel + * setup this condition never fires so we do nothing extra. + * + * FIXME: dual channel needs ->serialize support + */ + +static unsigned int opti82c46x_qc_issue(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct ata_device *adev = qc->dev; + + /* If timings are set and for the wrong channel (2nd test is + due to a libata shortcoming and will eventually go I hope) */ + if (ap->host->private_data != ap->host + && ap->host->private_data != NULL) + opti82c46x_set_piomode(ap, adev); + + return ata_sff_qc_issue(qc); +} + +static struct ata_port_operations opti82c46x_port_ops = { + .inherits = &legacy_base_port_ops, + .set_piomode = opti82c46x_set_piomode, + .qc_issue = opti82c46x_qc_issue, +}; + +/** + * qdi65x0_set_piomode - PIO setup for QDI65x0 + * @ap: Port + * @adev: Device + * + * In single channel mode the 6580 has one clock per device and we can + * avoid the requirement to clock switch. We also have to load the timing + * into the right clock according to whether we are master or slave. + * + * In dual channel mode the 6580 has one clock per channel and we have + * to software clockswitch in qc_issue. + */ + +static void qdi65x0_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + struct ata_timing t; + struct legacy_data *ld_qdi = ap->host->private_data; + int active, recovery; + u8 timing; + + /* Get the timing data in cycles */ + ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000); + + if (ld_qdi->fast) { + active = 8 - clamp_val(t.active, 1, 8); + recovery = 18 - clamp_val(t.recover, 3, 18); + } else { + active = 9 - clamp_val(t.active, 2, 9); + recovery = 15 - clamp_val(t.recover, 0, 15); + } + timing = (recovery << 4) | active | 0x08; + ld_qdi->clock[adev->devno] = timing; + + if (ld_qdi->type == QDI6580) + outb(timing, ld_qdi->timing + 2 * adev->devno); + else + outb(timing, ld_qdi->timing + 2 * ap->port_no); + + /* Clear the FIFO */ + if (ld_qdi->type != QDI6500 && adev->class != ATA_DEV_ATA) + outb(0x5F, (ld_qdi->timing & 0xFFF0) + 3); +} + +/** + * qdi_qc_issue - command issue + * @qc: command pending + * + * Called when the libata layer is about to issue a command. We wrap + * this interface so that we can load the correct ATA timings. + */ + +static unsigned int qdi_qc_issue(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct ata_device *adev = qc->dev; + struct legacy_data *ld_qdi = ap->host->private_data; + + if (ld_qdi->clock[adev->devno] != ld_qdi->last) { + if (adev->pio_mode) { + ld_qdi->last = ld_qdi->clock[adev->devno]; + outb(ld_qdi->clock[adev->devno], ld_qdi->timing + + 2 * ap->port_no); + } + } + return ata_sff_qc_issue(qc); +} + +static unsigned int vlb32_data_xfer(struct ata_device *adev, unsigned char *buf, + unsigned int buflen, int rw) +{ + struct ata_port *ap = adev->link->ap; + int slop = buflen & 3; + + if (ata_id_has_dword_io(adev->id) && (slop == 0 || slop == 3) + && (ap->pflags & ATA_PFLAG_PIO32)) { + if (rw == WRITE) + iowrite32_rep(ap->ioaddr.data_addr, buf, buflen >> 2); + else + ioread32_rep(ap->ioaddr.data_addr, buf, buflen >> 2); + + if (unlikely(slop)) { + __le32 pad; + if (rw == WRITE) { + memcpy(&pad, buf + buflen - slop, slop); + iowrite32(le32_to_cpu(pad), ap->ioaddr.data_addr); + } else { + pad = cpu_to_le32(ioread32(ap->ioaddr.data_addr)); + memcpy(buf + buflen - slop, &pad, slop); + } + } + return (buflen + 3) & ~3; + } else + return ata_sff_data_xfer(adev, buf, buflen, rw); +} + +static int qdi_port(struct platform_device *dev, + struct legacy_probe *lp, struct legacy_data *ld) +{ + if (devm_request_region(&dev->dev, lp->private, 4, "qdi") == NULL) + return -EBUSY; + ld->timing = lp->private; + return 0; +} + +static struct ata_port_operations qdi6500_port_ops = { + .inherits = &legacy_base_port_ops, + .set_piomode = qdi65x0_set_piomode, + .qc_issue = qdi_qc_issue, + .sff_data_xfer = vlb32_data_xfer, +}; + +static struct ata_port_operations qdi6580_port_ops = { + .inherits = &legacy_base_port_ops, + .set_piomode = qdi65x0_set_piomode, + .sff_data_xfer = vlb32_data_xfer, +}; + +static struct ata_port_operations qdi6580dp_port_ops = { + .inherits = &legacy_base_port_ops, + .set_piomode = qdi65x0_set_piomode, + .qc_issue = qdi_qc_issue, + .sff_data_xfer = vlb32_data_xfer, +}; + +static DEFINE_SPINLOCK(winbond_lock); + +static void winbond_writecfg(unsigned long port, u8 reg, u8 val) +{ + unsigned long flags; + spin_lock_irqsave(&winbond_lock, flags); + outb(reg, port + 0x01); + outb(val, port + 0x02); + spin_unlock_irqrestore(&winbond_lock, flags); +} + +static u8 winbond_readcfg(unsigned long port, u8 reg) +{ + u8 val; + + unsigned long flags; + spin_lock_irqsave(&winbond_lock, flags); + outb(reg, port + 0x01); + val = inb(port + 0x02); + spin_unlock_irqrestore(&winbond_lock, flags); + + return val; +} + +static void winbond_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + struct ata_timing t; + struct legacy_data *ld_winbond = ap->host->private_data; + int active, recovery; + u8 reg; + int timing = 0x88 + (ap->port_no * 4) + (adev->devno * 2); + + reg = winbond_readcfg(ld_winbond->timing, 0x81); + + /* Get the timing data in cycles */ + if (reg & 0x40) /* Fast VLB bus, assume 50MHz */ + ata_timing_compute(adev, adev->pio_mode, &t, 20000, 1000); + else + ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000); + + active = (clamp_val(t.active, 3, 17) - 1) & 0x0F; + recovery = (clamp_val(t.recover, 1, 15) + 1) & 0x0F; + timing = (active << 4) | recovery; + winbond_writecfg(ld_winbond->timing, timing, reg); + + /* Load the setup timing */ + + reg = 0x35; + if (adev->class != ATA_DEV_ATA) + reg |= 0x08; /* FIFO off */ + if (!ata_pio_need_iordy(adev)) + reg |= 0x02; /* IORDY off */ + reg |= (clamp_val(t.setup, 0, 3) << 6); + winbond_writecfg(ld_winbond->timing, timing + 1, reg); +} + +static int winbond_port(struct platform_device *dev, + struct legacy_probe *lp, struct legacy_data *ld) +{ + if (devm_request_region(&dev->dev, lp->private, 4, "winbond") == NULL) + return -EBUSY; + ld->timing = lp->private; + return 0; +} + +static struct ata_port_operations winbond_port_ops = { + .inherits = &legacy_base_port_ops, + .set_piomode = winbond_set_piomode, + .sff_data_xfer = vlb32_data_xfer, +}; + +static struct legacy_controller controllers[] = { + {"BIOS", &legacy_port_ops, ATA_PIO4, + ATA_FLAG_NO_IORDY, 0, NULL }, + {"Snooping", &simple_port_ops, ATA_PIO4, + 0, 0, NULL }, + {"PDC20230", &pdc20230_port_ops, ATA_PIO2, + ATA_FLAG_NO_IORDY, + ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32CHANGE, NULL }, + {"HT6560A", &ht6560a_port_ops, ATA_PIO2, + ATA_FLAG_NO_IORDY, 0, NULL }, + {"HT6560B", &ht6560b_port_ops, ATA_PIO4, + ATA_FLAG_NO_IORDY, 0, NULL }, + {"OPTI82C611A", &opti82c611a_port_ops, ATA_PIO3, + 0, 0, NULL }, + {"OPTI82C46X", &opti82c46x_port_ops, ATA_PIO3, + 0, 0, NULL }, + {"QDI6500", &qdi6500_port_ops, ATA_PIO2, + ATA_FLAG_NO_IORDY, + ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32CHANGE, qdi_port }, + {"QDI6580", &qdi6580_port_ops, ATA_PIO4, + 0, ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32CHANGE, qdi_port }, + {"QDI6580DP", &qdi6580dp_port_ops, ATA_PIO4, + 0, ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32CHANGE, qdi_port }, + {"W83759A", &winbond_port_ops, ATA_PIO4, + 0, ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32CHANGE, + winbond_port } +}; + +/** + * probe_chip_type - Discover controller + * @probe: Probe entry to check + * + * Probe an ATA port and identify the type of controller. We don't + * check if the controller appears to be driveless at this point. + */ + +static __init int probe_chip_type(struct legacy_probe *probe) +{ + int mask = 1 << probe->slot; + + if (winbond && (probe->port == 0x1F0 || probe->port == 0x170)) { + u8 reg = winbond_readcfg(winbond, 0x81); + reg |= 0x80; /* jumpered mode off */ + winbond_writecfg(winbond, 0x81, reg); + reg = winbond_readcfg(winbond, 0x83); + reg |= 0xF0; /* local control */ + winbond_writecfg(winbond, 0x83, reg); + reg = winbond_readcfg(winbond, 0x85); + reg |= 0xF0; /* programmable timing */ + winbond_writecfg(winbond, 0x85, reg); + + reg = winbond_readcfg(winbond, 0x81); + + if (reg & mask) + return W83759A; + } + if (probe->port == 0x1F0) { + unsigned long flags; + local_irq_save(flags); + /* Probes */ + outb(inb(0x1F2) | 0x80, 0x1F2); + inb(0x1F5); + inb(0x1F2); + inb(0x3F6); + inb(0x3F6); + inb(0x1F2); + inb(0x1F2); + + if ((inb(0x1F2) & 0x80) == 0) { + /* PDC20230c or 20630 ? */ + printk(KERN_INFO "PDC20230-C/20630 VLB ATA controller" + " detected.\n"); + udelay(100); + inb(0x1F5); + local_irq_restore(flags); + return PDC20230; + } else { + outb(0x55, 0x1F2); + inb(0x1F2); + inb(0x1F2); + if (inb(0x1F2) == 0x00) + printk(KERN_INFO "PDC20230-B VLB ATA " + "controller detected.\n"); + local_irq_restore(flags); + return BIOS; + } + local_irq_restore(flags); + } + + if (ht6560a & mask) + return HT6560A; + if (ht6560b & mask) + return HT6560B; + if (opti82c611a & mask) + return OPTI611A; + if (opti82c46x & mask) + return OPTI46X; + if (autospeed & mask) + return SNOOP; + return BIOS; +} + + +/** + * legacy_init_one - attach a legacy interface + * @pl: probe record + * + * Register an ISA bus IDE interface. Such interfaces are PIO and we + * assume do not support IRQ sharing. + */ + +static __init int legacy_init_one(struct legacy_probe *probe) +{ + struct legacy_controller *controller = &controllers[probe->type]; + int pio_modes = controller->pio_mask; + unsigned long io = probe->port; + u32 mask = (1 << probe->slot); + struct ata_port_operations *ops = controller->ops; + struct legacy_data *ld = &legacy_data[probe->slot]; + struct ata_host *host = NULL; + struct ata_port *ap; + struct platform_device *pdev; + struct ata_device *dev; + void __iomem *io_addr, *ctrl_addr; + u32 iordy = (iordy_mask & mask) ? 0: ATA_FLAG_NO_IORDY; + int ret; + + iordy |= controller->flags; + + pdev = platform_device_register_simple(DRV_NAME, probe->slot, NULL, 0); + if (IS_ERR(pdev)) + return PTR_ERR(pdev); + + ret = -EBUSY; + if (devm_request_region(&pdev->dev, io, 8, "pata_legacy") == NULL || + devm_request_region(&pdev->dev, io + 0x0206, 1, + "pata_legacy") == NULL) + goto fail; + + ret = -ENOMEM; + io_addr = devm_ioport_map(&pdev->dev, io, 8); + ctrl_addr = devm_ioport_map(&pdev->dev, io + 0x0206, 1); + if (!io_addr || !ctrl_addr) + goto fail; + ld->type = probe->type; + if (controller->setup) + if (controller->setup(pdev, probe, ld) < 0) + goto fail; + host = ata_host_alloc(&pdev->dev, 1); + if (!host) + goto fail; + ap = host->ports[0]; + + ap->ops = ops; + ap->pio_mask = pio_modes; + ap->flags |= ATA_FLAG_SLAVE_POSS | iordy; + ap->pflags |= controller->pflags; + ap->ioaddr.cmd_addr = io_addr; + ap->ioaddr.altstatus_addr = ctrl_addr; + ap->ioaddr.ctl_addr = ctrl_addr; + ata_sff_std_ports(&ap->ioaddr); + ap->host->private_data = ld; + + ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", io, io + 0x0206); + + ret = ata_host_activate(host, probe->irq, ata_sff_interrupt, 0, + &legacy_sht); + if (ret) + goto fail; + async_synchronize_full(); + ld->platform_dev = pdev; + + /* Nothing found means we drop the port as its probably not there */ + + ret = -ENODEV; + ata_for_each_dev(dev, &ap->link, ALL) { + if (!ata_dev_absent(dev)) { + legacy_host[probe->slot] = host; + ld->platform_dev = pdev; + return 0; + } + } + ata_host_detach(host); +fail: + platform_device_unregister(pdev); + return ret; +} + +/** + * legacy_check_special_cases - ATA special cases + * @p: PCI device to check + * @master: set this if we find an ATA master + * @master: set this if we find an ATA secondary + * + * A small number of vendors implemented early PCI ATA interfaces + * on bridge logic without the ATA interface being PCI visible. + * Where we have a matching PCI driver we must skip the relevant + * device here. If we don't know about it then the legacy driver + * is the right driver anyway. + */ + +static void __init legacy_check_special_cases(struct pci_dev *p, int *primary, + int *secondary) +{ + /* Cyrix CS5510 pre SFF MWDMA ATA on the bridge */ + if (p->vendor == 0x1078 && p->device == 0x0000) { + *primary = *secondary = 1; + return; + } + /* Cyrix CS5520 pre SFF MWDMA ATA on the bridge */ + if (p->vendor == 0x1078 && p->device == 0x0002) { + *primary = *secondary = 1; + return; + } + /* Intel MPIIX - PIO ATA on non PCI side of bridge */ + if (p->vendor == 0x8086 && p->device == 0x1234) { + u16 r; + pci_read_config_word(p, 0x6C, &r); + if (r & 0x8000) { + /* ATA port enabled */ + if (r & 0x4000) + *secondary = 1; + else + *primary = 1; + } + return; + } +} + +static __init void probe_opti_vlb(void) +{ + /* If an OPTI 82C46X is present find out where the channels are */ + static const char *optis[4] = { + "3/463MV", "5MV", + "5MVA", "5MVB" + }; + u8 chans = 1; + u8 ctrl = (opti_syscfg(0x30) & 0xC0) >> 6; + + opti82c46x = 3; /* Assume master and slave first */ + printk(KERN_INFO DRV_NAME ": Opti 82C46%s chipset support.\n", + optis[ctrl]); + if (ctrl == 3) + chans = (opti_syscfg(0x3F) & 0x20) ? 2 : 1; + ctrl = opti_syscfg(0xAC); + /* Check enabled and this port is the 465MV port. On the + MVB we may have two channels */ + if (ctrl & 8) { + if (chans == 2) { + legacy_probe_add(0x1F0, 14, OPTI46X, 0); + legacy_probe_add(0x170, 15, OPTI46X, 0); + } + if (ctrl & 4) + legacy_probe_add(0x170, 15, OPTI46X, 0); + else + legacy_probe_add(0x1F0, 14, OPTI46X, 0); + } else + legacy_probe_add(0x1F0, 14, OPTI46X, 0); +} + +static __init void qdi65_identify_port(u8 r, u8 res, unsigned long port) +{ + static const unsigned long ide_port[2] = { 0x170, 0x1F0 }; + /* Check card type */ + if ((r & 0xF0) == 0xC0) { + /* QD6500: single channel */ + if (r & 8) + /* Disabled ? */ + return; + legacy_probe_add(ide_port[r & 0x01], 14 + (r & 0x01), + QDI6500, port); + } + if (((r & 0xF0) == 0xA0) || (r & 0xF0) == 0x50) { + /* QD6580: dual channel */ + if (!request_region(port + 2 , 2, "pata_qdi")) { + release_region(port, 2); + return; + } + res = inb(port + 3); + /* Single channel mode ? */ + if (res & 1) + legacy_probe_add(ide_port[r & 0x01], 14 + (r & 0x01), + QDI6580, port); + else { /* Dual channel mode */ + legacy_probe_add(0x1F0, 14, QDI6580DP, port); + /* port + 0x02, r & 0x04 */ + legacy_probe_add(0x170, 15, QDI6580DP, port + 2); + } + release_region(port + 2, 2); + } +} + +static __init void probe_qdi_vlb(void) +{ + unsigned long flags; + static const unsigned long qd_port[2] = { 0x30, 0xB0 }; + int i; + + /* + * Check each possible QD65xx base address + */ + + for (i = 0; i < 2; i++) { + unsigned long port = qd_port[i]; + u8 r, res; + + + if (request_region(port, 2, "pata_qdi")) { + /* Check for a card */ + local_irq_save(flags); + /* I have no h/w that needs this delay but it + is present in the historic code */ + r = inb(port); + udelay(1); + outb(0x19, port); + udelay(1); + res = inb(port); + udelay(1); + outb(r, port); + udelay(1); + local_irq_restore(flags); + + /* Fail */ + if (res == 0x19) { + release_region(port, 2); + continue; + } + /* Passes the presence test */ + r = inb(port + 1); + udelay(1); + /* Check port agrees with port set */ + if ((r & 2) >> 1 == i) + qdi65_identify_port(r, res, port); + release_region(port, 2); + } + } +} + +/** + * legacy_init - attach legacy interfaces + * + * Attach legacy IDE interfaces by scanning the usual IRQ/port suspects. + * Right now we do not scan the ide0 and ide1 address but should do so + * for non PCI systems or systems with no PCI IDE legacy mode devices. + * If you fix that note there are special cases to consider like VLB + * drivers and CS5510/20. + */ + +static __init int legacy_init(void) +{ + int i; + int ct = 0; + int primary = 0; + int secondary = 0; + int pci_present = 0; + struct legacy_probe *pl = &probe_list[0]; + int slot = 0; + + struct pci_dev *p = NULL; + + for_each_pci_dev(p) { + int r; + /* Check for any overlap of the system ATA mappings. Native + mode controllers stuck on these addresses or some devices + in 'raid' mode won't be found by the storage class test */ + for (r = 0; r < 6; r++) { + if (pci_resource_start(p, r) == 0x1f0) + primary = 1; + if (pci_resource_start(p, r) == 0x170) + secondary = 1; + } + /* Check for special cases */ + legacy_check_special_cases(p, &primary, &secondary); + + /* If PCI bus is present then don't probe for tertiary + legacy ports */ + pci_present = 1; + } + + if (winbond == 1) + winbond = 0x130; /* Default port, alt is 1B0 */ + + if (primary == 0 || all) + legacy_probe_add(0x1F0, 14, UNKNOWN, 0); + if (secondary == 0 || all) + legacy_probe_add(0x170, 15, UNKNOWN, 0); + + if (probe_all || !pci_present) { + /* ISA/VLB extra ports */ + legacy_probe_add(0x1E8, 11, UNKNOWN, 0); + legacy_probe_add(0x168, 10, UNKNOWN, 0); + legacy_probe_add(0x1E0, 8, UNKNOWN, 0); + legacy_probe_add(0x160, 12, UNKNOWN, 0); + } + + if (opti82c46x) + probe_opti_vlb(); + if (qdi) + probe_qdi_vlb(); + + for (i = 0; i < NR_HOST; i++, pl++) { + if (pl->port == 0) + continue; + if (pl->type == UNKNOWN) + pl->type = probe_chip_type(pl); + pl->slot = slot++; + if (legacy_init_one(pl) == 0) + ct++; + } + if (ct != 0) + return 0; + return -ENODEV; +} + +static __exit void legacy_exit(void) +{ + int i; + + for (i = 0; i < nr_legacy_host; i++) { + struct legacy_data *ld = &legacy_data[i]; + ata_host_detach(legacy_host[i]); + platform_device_unregister(ld->platform_dev); + } +} + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("low-level driver for legacy ATA"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(DRV_VERSION); +MODULE_ALIAS("pata_qdi"); +MODULE_ALIAS("pata_winbond"); + +module_param(probe_all, int, 0); +module_param(autospeed, int, 0); +module_param(ht6560a, int, 0); +module_param(ht6560b, int, 0); +module_param(opti82c611a, int, 0); +module_param(opti82c46x, int, 0); +module_param(qdi, int, 0); +module_param(winbond, int, 0); +module_param(pio_mask, int, 0); +module_param(iordy_mask, int, 0); + +module_init(legacy_init); +module_exit(legacy_exit); |