diff options
Diffstat (limited to 'arch/x86/Kconfig.debug')
| -rw-r--r-- | arch/x86/Kconfig.debug | 302 |
1 files changed, 302 insertions, 0 deletions
diff --git a/arch/x86/Kconfig.debug b/arch/x86/Kconfig.debug new file mode 100644 index 00000000..e46c2147 --- /dev/null +++ b/arch/x86/Kconfig.debug @@ -0,0 +1,302 @@ +menu "Kernel hacking" + +config TRACE_IRQFLAGS_SUPPORT + def_bool y + +source "lib/Kconfig.debug" + +config STRICT_DEVMEM + bool "Filter access to /dev/mem" + ---help--- + If this option is disabled, you allow userspace (root) access to all + of memory, including kernel and userspace memory. Accidental + access to this is obviously disastrous, but specific access can + be used by people debugging the kernel. Note that with PAT support + enabled, even in this case there are restrictions on /dev/mem + use due to the cache aliasing requirements. + + If this option is switched on, the /dev/mem file only allows + userspace access to PCI space and the BIOS code and data regions. + This is sufficient for dosemu and X and all common users of + /dev/mem. + + If in doubt, say Y. + +config X86_VERBOSE_BOOTUP + bool "Enable verbose x86 bootup info messages" + default y + ---help--- + Enables the informational output from the decompression stage + (e.g. bzImage) of the boot. If you disable this you will still + see errors. Disable this if you want silent bootup. + +config EARLY_PRINTK + bool "Early printk" if EXPERT + default y + ---help--- + Write kernel log output directly into the VGA buffer or to a serial + port. + + This is useful for kernel debugging when your machine crashes very + early before the console code is initialized. For normal operation + it is not recommended because it looks ugly and doesn't cooperate + with klogd/syslogd or the X server. You should normally N here, + unless you want to debug such a crash. + +config EARLY_PRINTK_INTEL_MID + bool "Early printk for Intel MID platform support" + depends on EARLY_PRINTK && X86_INTEL_MID + +config EARLY_PRINTK_DBGP + bool "Early printk via EHCI debug port" + depends on EARLY_PRINTK && PCI + ---help--- + Write kernel log output directly into the EHCI debug port. + + This is useful for kernel debugging when your machine crashes very + early before the console code is initialized. For normal operation + it is not recommended because it looks ugly and doesn't cooperate + with klogd/syslogd or the X server. You should normally N here, + unless you want to debug such a crash. You need usb debug device. + +config DEBUG_STACKOVERFLOW + bool "Check for stack overflows" + depends on DEBUG_KERNEL + ---help--- + Say Y here if you want to check the overflows of kernel, IRQ + and exception stacks. This option will cause messages of the + stacks in detail when free stack space drops below a certain + limit. + If in doubt, say "N". + +config X86_PTDUMP + bool "Export kernel pagetable layout to userspace via debugfs" + depends on DEBUG_KERNEL + select DEBUG_FS + ---help--- + Say Y here if you want to show the kernel pagetable layout in a + debugfs file. This information is only useful for kernel developers + who are working in architecture specific areas of the kernel. + It is probably not a good idea to enable this feature in a production + kernel. + If in doubt, say "N" + +config DEBUG_RODATA + bool "Write protect kernel read-only data structures" + default y + depends on DEBUG_KERNEL + ---help--- + Mark the kernel read-only data as write-protected in the pagetables, + in order to catch accidental (and incorrect) writes to such const + data. This is recommended so that we can catch kernel bugs sooner. + If in doubt, say "Y". + +config DEBUG_RODATA_TEST + bool "Testcase for the DEBUG_RODATA feature" + depends on DEBUG_RODATA + default y + ---help--- + This option enables a testcase for the DEBUG_RODATA + feature as well as for the change_page_attr() infrastructure. + If in doubt, say "N" + +config DEBUG_SET_MODULE_RONX + bool "Set loadable kernel module data as NX and text as RO" + depends on MODULES + ---help--- + This option helps catch unintended modifications to loadable + kernel module's text and read-only data. It also prevents execution + of module data. Such protection may interfere with run-time code + patching and dynamic kernel tracing - and they might also protect + against certain classes of kernel exploits. + If in doubt, say "N". + +config DEBUG_NX_TEST + tristate "Testcase for the NX non-executable stack feature" + depends on DEBUG_KERNEL && m + ---help--- + This option enables a testcase for the CPU NX capability + and the software setup of this feature. + If in doubt, say "N" + +config DOUBLEFAULT + default y + bool "Enable doublefault exception handler" if EXPERT + depends on X86_32 + ---help--- + This option allows trapping of rare doublefault exceptions that + would otherwise cause a system to silently reboot. Disabling this + option saves about 4k and might cause you much additional grey + hair. + +config IOMMU_DEBUG + bool "Enable IOMMU debugging" + depends on GART_IOMMU && DEBUG_KERNEL + depends on X86_64 + ---help--- + Force the IOMMU to on even when you have less than 4GB of + memory and add debugging code. On overflow always panic. And + allow to enable IOMMU leak tracing. Can be disabled at boot + time with iommu=noforce. This will also enable scatter gather + list merging. Currently not recommended for production + code. When you use it make sure you have a big enough + IOMMU/AGP aperture. Most of the options enabled by this can + be set more finegrained using the iommu= command line + options. See Documentation/x86/x86_64/boot-options.txt for more + details. + +config IOMMU_STRESS + bool "Enable IOMMU stress-test mode" + ---help--- + This option disables various optimizations in IOMMU related + code to do real stress testing of the IOMMU code. This option + will cause a performance drop and should only be enabled for + testing. + +config IOMMU_LEAK + bool "IOMMU leak tracing" + depends on IOMMU_DEBUG && DMA_API_DEBUG + ---help--- + Add a simple leak tracer to the IOMMU code. This is useful when you + are debugging a buggy device driver that leaks IOMMU mappings. + +config HAVE_MMIOTRACE_SUPPORT + def_bool y + +config X86_DECODER_SELFTEST + bool "x86 instruction decoder selftest" + depends on DEBUG_KERNEL && KPROBES + ---help--- + Perform x86 instruction decoder selftests at build time. + This option is useful for checking the sanity of x86 instruction + decoder code. + If unsure, say "N". + +# +# IO delay types: +# + +config IO_DELAY_TYPE_0X80 + int + default "0" + +config IO_DELAY_TYPE_0XED + int + default "1" + +config IO_DELAY_TYPE_UDELAY + int + default "2" + +config IO_DELAY_TYPE_NONE + int + default "3" + +choice + prompt "IO delay type" + default IO_DELAY_0X80 + +config IO_DELAY_0X80 + bool "port 0x80 based port-IO delay [recommended]" + ---help--- + This is the traditional Linux IO delay used for in/out_p. + It is the most tested hence safest selection here. + +config IO_DELAY_0XED + bool "port 0xed based port-IO delay" + ---help--- + Use port 0xed as the IO delay. This frees up port 0x80 which is + often used as a hardware-debug port. + +config IO_DELAY_UDELAY + bool "udelay based port-IO delay" + ---help--- + Use udelay(2) as the IO delay method. This provides the delay + while not having any side-effect on the IO port space. + +config IO_DELAY_NONE + bool "no port-IO delay" + ---help--- + No port-IO delay. Will break on old boxes that require port-IO + delay for certain operations. Should work on most new machines. + +endchoice + +if IO_DELAY_0X80 +config DEFAULT_IO_DELAY_TYPE + int + default IO_DELAY_TYPE_0X80 +endif + +if IO_DELAY_0XED +config DEFAULT_IO_DELAY_TYPE + int + default IO_DELAY_TYPE_0XED +endif + +if IO_DELAY_UDELAY +config DEFAULT_IO_DELAY_TYPE + int + default IO_DELAY_TYPE_UDELAY +endif + +if IO_DELAY_NONE +config DEFAULT_IO_DELAY_TYPE + int + default IO_DELAY_TYPE_NONE +endif + +config DEBUG_BOOT_PARAMS + bool "Debug boot parameters" + depends on DEBUG_KERNEL + depends on DEBUG_FS + ---help--- + This option will cause struct boot_params to be exported via debugfs. + +config CPA_DEBUG + bool "CPA self-test code" + depends on DEBUG_KERNEL + ---help--- + Do change_page_attr() self-tests every 30 seconds. + +config OPTIMIZE_INLINING + bool "Allow gcc to uninline functions marked 'inline'" + ---help--- + This option determines if the kernel forces gcc to inline the functions + developers have marked 'inline'. Doing so takes away freedom from gcc to + do what it thinks is best, which is desirable for the gcc 3.x series of + compilers. The gcc 4.x series have a rewritten inlining algorithm and + enabling this option will generate a smaller kernel there. Hopefully + this algorithm is so good that allowing gcc 4.x and above to make the + decision will become the default in the future. Until then this option + is there to test gcc for this. + + If unsure, say N. + +config DEBUG_STRICT_USER_COPY_CHECKS + bool "Strict copy size checks" + depends on DEBUG_KERNEL && !TRACE_BRANCH_PROFILING + ---help--- + Enabling this option turns a certain set of sanity checks for user + copy operations into compile time failures. + + The copy_from_user() etc checks are there to help test if there + are sufficient security checks on the length argument of + the copy operation, by having gcc prove that the argument is + within bounds. + + If unsure, or if you run an older (pre 4.4) gcc, say N. + +config DEBUG_NMI_SELFTEST + bool "NMI Selftest" + depends on DEBUG_KERNEL && X86_LOCAL_APIC + ---help--- + Enabling this option turns on a quick NMI selftest to verify + that the NMI behaves correctly. + + This might help diagnose strange hangs that rely on NMI to + function properly. + + If unsure, say N. + +endmenu |