diff options
Diffstat (limited to 'arch/arm/plat-spear/include')
| -rw-r--r-- | arch/arm/plat-spear/include/plat/clock.h | 249 | ||||
| -rw-r--r-- | arch/arm/plat-spear/include/plat/debug-macro.S | 36 | ||||
| -rw-r--r-- | arch/arm/plat-spear/include/plat/gpio.h | 1 | ||||
| -rw-r--r-- | arch/arm/plat-spear/include/plat/hardware.h | 17 | ||||
| -rw-r--r-- | arch/arm/plat-spear/include/plat/keyboard.h | 162 | ||||
| -rw-r--r-- | arch/arm/plat-spear/include/plat/padmux.h | 92 | ||||
| -rw-r--r-- | arch/arm/plat-spear/include/plat/shirq.h | 73 | ||||
| -rw-r--r-- | arch/arm/plat-spear/include/plat/timex.h | 19 | ||||
| -rw-r--r-- | arch/arm/plat-spear/include/plat/uncompress.h | 43 |
9 files changed, 692 insertions, 0 deletions
diff --git a/arch/arm/plat-spear/include/plat/clock.h b/arch/arm/plat-spear/include/plat/clock.h new file mode 100644 index 00000000..0062bafe --- /dev/null +++ b/arch/arm/plat-spear/include/plat/clock.h @@ -0,0 +1,249 @@ +/* + * arch/arm/plat-spear/include/plat/clock.h + * + * Clock framework definitions for SPEAr platform + * + * Copyright (C) 2009 ST Microelectronics + * Viresh Kumar<viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __PLAT_CLOCK_H +#define __PLAT_CLOCK_H + +#include <linux/list.h> +#include <linux/clkdev.h> +#include <linux/types.h> + +/* clk structure flags */ +#define ALWAYS_ENABLED (1 << 0) /* clock always enabled */ +#define RESET_TO_ENABLE (1 << 1) /* reset register bit to enable clk */ +#define ENABLED_ON_INIT (1 << 2) /* clocks enabled at init */ + +/** + * struct clkops - clock operations + * @enable: pointer to clock enable function + * @disable: pointer to clock disable function + */ +struct clkops { + int (*enable) (struct clk *); + void (*disable) (struct clk *); +}; + +/** + * struct pclk_info - parents info + * @pclk: pointer to parent clk + * @pclk_val: value to be written for selecting this parent + */ +struct pclk_info { + struct clk *pclk; + u8 pclk_val; +}; + +/** + * struct pclk_sel - parents selection configuration + * @pclk_info: pointer to array of parent clock info + * @pclk_count: number of parents + * @pclk_sel_reg: register for selecting a parent + * @pclk_sel_mask: mask for selecting parent (can be used to clear bits also) + */ +struct pclk_sel { + struct pclk_info *pclk_info; + u8 pclk_count; + void __iomem *pclk_sel_reg; + unsigned int pclk_sel_mask; +}; + +/** + * struct rate_config - clk rate configurations + * @tbls: array of device specific clk rate tables, in ascending order of rates + * @count: size of tbls array + * @default_index: default setting when originally disabled + */ +struct rate_config { + void *tbls; + u8 count; + u8 default_index; +}; + +/** + * struct clk - clock structure + * @usage_count: num of users who enabled this clock + * @flags: flags for clock properties + * @rate: programmed clock rate in Hz + * @en_reg: clk enable/disable reg + * @en_reg_bit: clk enable/disable bit + * @ops: clk enable/disable ops - generic_clkops selected if NULL + * @recalc: pointer to clock rate recalculate function + * @set_rate: pointer to clock set rate function + * @calc_rate: pointer to clock get rate function for index + * @rate_config: rate configuration information, used by set_rate + * @div_factor: division factor to parent clock. + * @pclk: current parent clk + * @pclk_sel: pointer to parent selection structure + * @pclk_sel_shift: register shift for selecting parent of this clock + * @children: list for childrens or this clock + * @sibling: node for list of clocks having same parents + * @private_data: clock specific private data + * @node: list to maintain clocks linearly + * @cl: clocklook up associated with this clock + * @dent: object for debugfs + */ +struct clk { + unsigned int usage_count; + unsigned int flags; + unsigned long rate; + void __iomem *en_reg; + u8 en_reg_bit; + const struct clkops *ops; + int (*recalc) (struct clk *); + int (*set_rate) (struct clk *, unsigned long rate); + unsigned long (*calc_rate)(struct clk *, int index); + struct rate_config rate_config; + unsigned int div_factor; + + struct clk *pclk; + struct pclk_sel *pclk_sel; + unsigned int pclk_sel_shift; + + struct list_head children; + struct list_head sibling; + void *private_data; +#ifdef CONFIG_DEBUG_FS + struct list_head node; + struct clk_lookup *cl; + struct dentry *dent; +#endif +}; + +/* pll configuration structure */ +struct pll_clk_masks { + u32 mode_mask; + u32 mode_shift; + + u32 norm_fdbk_m_mask; + u32 norm_fdbk_m_shift; + u32 dith_fdbk_m_mask; + u32 dith_fdbk_m_shift; + u32 div_p_mask; + u32 div_p_shift; + u32 div_n_mask; + u32 div_n_shift; +}; + +struct pll_clk_config { + void __iomem *mode_reg; + void __iomem *cfg_reg; + struct pll_clk_masks *masks; +}; + +/* pll clk rate config structure */ +struct pll_rate_tbl { + u8 mode; + u16 m; + u8 n; + u8 p; +}; + +/* ahb and apb bus configuration structure */ +struct bus_clk_masks { + u32 mask; + u32 shift; +}; + +struct bus_clk_config { + void __iomem *reg; + struct bus_clk_masks *masks; +}; + +/* ahb and apb clk bus rate config structure */ +struct bus_rate_tbl { + u8 div; +}; + +/* Aux clk configuration structure: applicable to UART and FIRDA */ +struct aux_clk_masks { + u32 eq_sel_mask; + u32 eq_sel_shift; + u32 eq1_mask; + u32 eq2_mask; + u32 xscale_sel_mask; + u32 xscale_sel_shift; + u32 yscale_sel_mask; + u32 yscale_sel_shift; +}; + +struct aux_clk_config { + void __iomem *synth_reg; + struct aux_clk_masks *masks; +}; + +/* aux clk rate config structure */ +struct aux_rate_tbl { + u16 xscale; + u16 yscale; + u8 eq; +}; + +/* GPT clk configuration structure */ +struct gpt_clk_masks { + u32 mscale_sel_mask; + u32 mscale_sel_shift; + u32 nscale_sel_mask; + u32 nscale_sel_shift; +}; + +struct gpt_clk_config { + void __iomem *synth_reg; + struct gpt_clk_masks *masks; +}; + +/* gpt clk rate config structure */ +struct gpt_rate_tbl { + u16 mscale; + u16 nscale; +}; + +/* clcd clk configuration structure */ +struct clcd_synth_masks { + u32 div_factor_mask; + u32 div_factor_shift; +}; + +struct clcd_clk_config { + void __iomem *synth_reg; + struct clcd_synth_masks *masks; +}; + +/* clcd clk rate config structure */ +struct clcd_rate_tbl { + u16 div; +}; + +/* platform specific clock functions */ +void __init clk_init(void); +void clk_register(struct clk_lookup *cl); +void recalc_root_clocks(void); + +/* clock recalc & set rate functions */ +int follow_parent(struct clk *clk); +unsigned long pll_calc_rate(struct clk *clk, int index); +int pll_clk_recalc(struct clk *clk); +int pll_clk_set_rate(struct clk *clk, unsigned long desired_rate); +unsigned long bus_calc_rate(struct clk *clk, int index); +int bus_clk_recalc(struct clk *clk); +int bus_clk_set_rate(struct clk *clk, unsigned long desired_rate); +unsigned long gpt_calc_rate(struct clk *clk, int index); +int gpt_clk_recalc(struct clk *clk); +int gpt_clk_set_rate(struct clk *clk, unsigned long desired_rate); +unsigned long aux_calc_rate(struct clk *clk, int index); +int aux_clk_recalc(struct clk *clk); +int aux_clk_set_rate(struct clk *clk, unsigned long desired_rate); +unsigned long clcd_calc_rate(struct clk *clk, int index); +int clcd_clk_recalc(struct clk *clk); +int clcd_clk_set_rate(struct clk *clk, unsigned long desired_rate); + +#endif /* __PLAT_CLOCK_H */ diff --git a/arch/arm/plat-spear/include/plat/debug-macro.S b/arch/arm/plat-spear/include/plat/debug-macro.S new file mode 100644 index 00000000..02b160a1 --- /dev/null +++ b/arch/arm/plat-spear/include/plat/debug-macro.S @@ -0,0 +1,36 @@ +/* + * arch/arm/plat-spear/include/plat/debug-macro.S + * + * Debugging macro include header for spear platform + * + * Copyright (C) 2009 ST Microelectronics + * Viresh Kumar<viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/amba/serial.h> +#include <mach/hardware.h> + + .macro addruart, rp, rv, tmp + mov \rp, #SPEAR_DBG_UART_BASE @ Physical base + mov \rv, #VA_SPEAR_DBG_UART_BASE @ Virtual base + .endm + + .macro senduart, rd, rx + strb \rd, [\rx, #UART01x_DR] @ ASC_TX_BUFFER + .endm + + .macro waituart, rd, rx +1001: ldr \rd, [\rx, #UART01x_FR] @ FLAG REGISTER + tst \rd, #UART01x_FR_TXFF @ TX_FULL + bne 1001b + .endm + + .macro busyuart, rd, rx +1002: ldr \rd, [\rx, #UART01x_FR] @ FLAG REGISTER + tst \rd, #UART011_FR_TXFE @ TX_EMPTY + beq 1002b + .endm diff --git a/arch/arm/plat-spear/include/plat/gpio.h b/arch/arm/plat-spear/include/plat/gpio.h new file mode 100644 index 00000000..40a8c178 --- /dev/null +++ b/arch/arm/plat-spear/include/plat/gpio.h @@ -0,0 +1 @@ +/* empty */ diff --git a/arch/arm/plat-spear/include/plat/hardware.h b/arch/arm/plat-spear/include/plat/hardware.h new file mode 100644 index 00000000..70187d76 --- /dev/null +++ b/arch/arm/plat-spear/include/plat/hardware.h @@ -0,0 +1,17 @@ +/* + * arch/arm/plat-spear/include/plat/hardware.h + * + * Hardware definitions for SPEAr + * + * Copyright (C) 2010 ST Microelectronics + * Viresh Kumar<viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __PLAT_HARDWARE_H +#define __PLAT_HARDWARE_H + +#endif /* __PLAT_HARDWARE_H */ diff --git a/arch/arm/plat-spear/include/plat/keyboard.h b/arch/arm/plat-spear/include/plat/keyboard.h new file mode 100644 index 00000000..0562f134 --- /dev/null +++ b/arch/arm/plat-spear/include/plat/keyboard.h @@ -0,0 +1,162 @@ +/* + * Copyright (C) 2010 ST Microelectronics + * Rajeev Kumar<rajeev-dlh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __PLAT_KEYBOARD_H +#define __PLAT_KEYBOARD_H + +#include <linux/bitops.h> +#include <linux/input.h> +#include <linux/input/matrix_keypad.h> +#include <linux/types.h> + +#define DECLARE_9x9_KEYMAP(_name) \ +int _name[] = { \ + KEY(0, 0, KEY_ESC), \ + KEY(0, 1, KEY_1), \ + KEY(0, 2, KEY_2), \ + KEY(0, 3, KEY_3), \ + KEY(0, 4, KEY_4), \ + KEY(0, 5, KEY_5), \ + KEY(0, 6, KEY_6), \ + KEY(0, 7, KEY_7), \ + KEY(0, 8, KEY_8), \ + KEY(1, 0, KEY_9), \ + KEY(1, 1, KEY_MINUS), \ + KEY(1, 2, KEY_EQUAL), \ + KEY(1, 3, KEY_BACKSPACE), \ + KEY(1, 4, KEY_TAB), \ + KEY(1, 5, KEY_Q), \ + KEY(1, 6, KEY_W), \ + KEY(1, 7, KEY_E), \ + KEY(1, 8, KEY_R), \ + KEY(2, 0, KEY_T), \ + KEY(2, 1, KEY_Y), \ + KEY(2, 2, KEY_U), \ + KEY(2, 3, KEY_I), \ + KEY(2, 4, KEY_O), \ + KEY(2, 5, KEY_P), \ + KEY(2, 6, KEY_LEFTBRACE), \ + KEY(2, 7, KEY_RIGHTBRACE), \ + KEY(2, 8, KEY_ENTER), \ + KEY(3, 0, KEY_LEFTCTRL), \ + KEY(3, 1, KEY_A), \ + KEY(3, 2, KEY_S), \ + KEY(3, 3, KEY_D), \ + KEY(3, 4, KEY_F), \ + KEY(3, 5, KEY_G), \ + KEY(3, 6, KEY_H), \ + KEY(3, 7, KEY_J), \ + KEY(3, 8, KEY_K), \ + KEY(4, 0, KEY_L), \ + KEY(4, 1, KEY_SEMICOLON), \ + KEY(4, 2, KEY_APOSTROPHE), \ + KEY(4, 3, KEY_GRAVE), \ + KEY(4, 4, KEY_LEFTSHIFT), \ + KEY(4, 5, KEY_BACKSLASH), \ + KEY(4, 6, KEY_Z), \ + KEY(4, 7, KEY_X), \ + KEY(4, 8, KEY_C), \ + KEY(5, 0, KEY_V), \ + KEY(5, 1, KEY_B), \ + KEY(5, 2, KEY_N), \ + KEY(5, 3, KEY_M), \ + KEY(5, 4, KEY_COMMA), \ + KEY(5, 5, KEY_DOT), \ + KEY(5, 6, KEY_SLASH), \ + KEY(5, 7, KEY_RIGHTSHIFT), \ + KEY(5, 8, KEY_KPASTERISK), \ + KEY(6, 0, KEY_LEFTALT), \ + KEY(6, 1, KEY_SPACE), \ + KEY(6, 2, KEY_CAPSLOCK), \ + KEY(6, 3, KEY_F1), \ + KEY(6, 4, KEY_F2), \ + KEY(6, 5, KEY_F3), \ + KEY(6, 6, KEY_F4), \ + KEY(6, 7, KEY_F5), \ + KEY(6, 8, KEY_F6), \ + KEY(7, 0, KEY_F7), \ + KEY(7, 1, KEY_F8), \ + KEY(7, 2, KEY_F9), \ + KEY(7, 3, KEY_F10), \ + KEY(7, 4, KEY_NUMLOCK), \ + KEY(7, 5, KEY_SCROLLLOCK), \ + KEY(7, 6, KEY_KP7), \ + KEY(7, 7, KEY_KP8), \ + KEY(7, 8, KEY_KP9), \ + KEY(8, 0, KEY_KPMINUS), \ + KEY(8, 1, KEY_KP4), \ + KEY(8, 2, KEY_KP5), \ + KEY(8, 3, KEY_KP6), \ + KEY(8, 4, KEY_KPPLUS), \ + KEY(8, 5, KEY_KP1), \ + KEY(8, 6, KEY_KP2), \ + KEY(8, 7, KEY_KP3), \ + KEY(8, 8, KEY_KP0), \ +} + +#define DECLARE_6x6_KEYMAP(_name) \ +int _name[] = { \ + KEY(0, 0, KEY_RESERVED), \ + KEY(0, 1, KEY_1), \ + KEY(0, 2, KEY_2), \ + KEY(0, 3, KEY_3), \ + KEY(0, 4, KEY_4), \ + KEY(0, 5, KEY_5), \ + KEY(1, 0, KEY_Q), \ + KEY(1, 1, KEY_W), \ + KEY(1, 2, KEY_E), \ + KEY(1, 3, KEY_R), \ + KEY(1, 4, KEY_T), \ + KEY(1, 5, KEY_Y), \ + KEY(2, 0, KEY_D), \ + KEY(2, 1, KEY_F), \ + KEY(2, 2, KEY_G), \ + KEY(2, 3, KEY_H), \ + KEY(2, 4, KEY_J), \ + KEY(2, 5, KEY_K), \ + KEY(3, 0, KEY_B), \ + KEY(3, 1, KEY_N), \ + KEY(3, 2, KEY_M), \ + KEY(3, 3, KEY_COMMA), \ + KEY(3, 4, KEY_DOT), \ + KEY(3, 5, KEY_SLASH), \ + KEY(4, 0, KEY_F6), \ + KEY(4, 1, KEY_F7), \ + KEY(4, 2, KEY_F8), \ + KEY(4, 3, KEY_F9), \ + KEY(4, 4, KEY_F10), \ + KEY(4, 5, KEY_NUMLOCK), \ + KEY(5, 0, KEY_KP2), \ + KEY(5, 1, KEY_KP3), \ + KEY(5, 2, KEY_KP0), \ + KEY(5, 3, KEY_KPDOT), \ + KEY(5, 4, KEY_RO), \ + KEY(5, 5, KEY_ZENKAKUHANKAKU), \ +} + +#define KEYPAD_9x9 0 +#define KEYPAD_6x6 1 +#define KEYPAD_2x2 2 + +/** + * struct kbd_platform_data - spear keyboard platform data + * keymap: pointer to keymap data (table and size) + * rep: enables key autorepeat + * mode: choose keyboard support(9x9, 6x6, 2x2) + * + * This structure is supposed to be used by platform code to supply + * keymaps to drivers that implement keyboards. + */ +struct kbd_platform_data { + const struct matrix_keymap_data *keymap; + bool rep; + unsigned int mode; +}; + +#endif /* __PLAT_KEYBOARD_H */ diff --git a/arch/arm/plat-spear/include/plat/padmux.h b/arch/arm/plat-spear/include/plat/padmux.h new file mode 100644 index 00000000..877f3adc --- /dev/null +++ b/arch/arm/plat-spear/include/plat/padmux.h @@ -0,0 +1,92 @@ +/* + * arch/arm/plat-spear/include/plat/padmux.h + * + * SPEAr platform specific gpio pads muxing file + * + * Copyright (C) 2009 ST Microelectronics + * Viresh Kumar<viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __PLAT_PADMUX_H +#define __PLAT_PADMUX_H + +#include <linux/types.h> + +/* + * struct pmx_reg: configuration structure for mode reg and mux reg + * + * offset: offset of mode reg + * mask: mask of mode reg + */ +struct pmx_reg { + u32 offset; + u32 mask; +}; + +/* + * struct pmx_dev_mode: configuration structure every group of modes of a device + * + * ids: all modes for this configuration + * mask: mask for supported mode + */ +struct pmx_dev_mode { + u32 ids; + u32 mask; +}; + +/* + * struct pmx_mode: mode definition structure + * + * name: mode name + * mask: mode mask + */ +struct pmx_mode { + char *name; + u32 id; + u32 mask; +}; + +/* + * struct pmx_dev: device definition structure + * + * name: device name + * modes: device configuration array for different modes supported + * mode_count: size of modes array + * is_active: is peripheral active/enabled + * enb_on_reset: if 1, mask bits to be cleared in reg otherwise to be set in reg + */ +struct pmx_dev { + char *name; + struct pmx_dev_mode *modes; + u8 mode_count; + bool is_active; + bool enb_on_reset; +}; + +/* + * struct pmx_driver: driver definition structure + * + * mode: mode to be set + * devs: array of pointer to pmx devices + * devs_count: ARRAY_SIZE of devs + * base: base address of soc config registers + * mode_reg: structure of mode config register + * mux_reg: structure of device mux config register + */ +struct pmx_driver { + struct pmx_mode *mode; + struct pmx_dev **devs; + u8 devs_count; + u32 *base; + struct pmx_reg mode_reg; + struct pmx_reg mux_reg; +}; + +/* pmx functions */ +int pmx_register(struct pmx_driver *driver); + +#endif /* __PLAT_PADMUX_H */ diff --git a/arch/arm/plat-spear/include/plat/shirq.h b/arch/arm/plat-spear/include/plat/shirq.h new file mode 100644 index 00000000..03ed8b58 --- /dev/null +++ b/arch/arm/plat-spear/include/plat/shirq.h @@ -0,0 +1,73 @@ +/* + * arch/arm/plat-spear/include/plat/shirq.h + * + * SPEAr platform shared irq layer header file + * + * Copyright (C) 2009 ST Microelectronics + * Viresh Kumar<viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __PLAT_SHIRQ_H +#define __PLAT_SHIRQ_H + +#include <linux/irq.h> +#include <linux/types.h> + +/* + * struct shirq_dev_config: shared irq device configuration + * + * virq: virtual irq number of device + * enb_mask: enable mask of device + * status_mask: status mask of device + * clear_mask: clear mask of device + */ +struct shirq_dev_config { + u32 virq; + u32 enb_mask; + u32 status_mask; + u32 clear_mask; +}; + +/* + * struct shirq_regs: shared irq register configuration + * + * base: base address of shared irq register + * enb_reg: enable register offset + * reset_to_enb: val 1 indicates, we need to clear bit for enabling interrupt + * status_reg: status register offset + * status_reg_mask: status register valid mask + * clear_reg: clear register offset + * reset_to_clear: val 1 indicates, we need to clear bit for clearing interrupt + */ +struct shirq_regs { + void __iomem *base; + u32 enb_reg; + u32 reset_to_enb; + u32 status_reg; + u32 status_reg_mask; + u32 clear_reg; + u32 reset_to_clear; +}; + +/* + * struct spear_shirq: shared irq structure + * + * irq: hardware irq number + * dev_config: array of device config structures which are using "irq" line + * dev_count: size of dev_config array + * regs: register configuration for shared irq block + */ +struct spear_shirq { + u32 irq; + struct shirq_dev_config *dev_config; + u32 dev_count; + struct shirq_regs regs; +}; + +int spear_shirq_register(struct spear_shirq *shirq); + +#endif /* __PLAT_SHIRQ_H */ diff --git a/arch/arm/plat-spear/include/plat/timex.h b/arch/arm/plat-spear/include/plat/timex.h new file mode 100644 index 00000000..914d09dd --- /dev/null +++ b/arch/arm/plat-spear/include/plat/timex.h @@ -0,0 +1,19 @@ +/* + * arch/arm/plat-spear/include/plat/timex.h + * + * SPEAr platform specific timex definitions + * + * Copyright (C) 2009 ST Microelectronics + * Viresh Kumar<viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __PLAT_TIMEX_H +#define __PLAT_TIMEX_H + +#define CLOCK_TICK_RATE 48000000 + +#endif /* __PLAT_TIMEX_H */ diff --git a/arch/arm/plat-spear/include/plat/uncompress.h b/arch/arm/plat-spear/include/plat/uncompress.h new file mode 100644 index 00000000..1bf84527 --- /dev/null +++ b/arch/arm/plat-spear/include/plat/uncompress.h @@ -0,0 +1,43 @@ +/* + * arch/arm/plat-spear/include/plat/uncompress.h + * + * Serial port stubs for kernel decompress status messages + * + * Copyright (C) 2009 ST Microelectronics + * Viresh Kumar<viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/io.h> +#include <linux/amba/serial.h> +#include <mach/hardware.h> + +#ifndef __PLAT_UNCOMPRESS_H +#define __PLAT_UNCOMPRESS_H +/* + * This does not append a newline + */ +static inline void putc(int c) +{ + void __iomem *base = (void __iomem *)SPEAR_DBG_UART_BASE; + + while (readl_relaxed(base + UART01x_FR) & UART01x_FR_TXFF) + barrier(); + + writel_relaxed(c, base + UART01x_DR); +} + +static inline void flush(void) +{ +} + +/* + * nothing to do + */ +#define arch_decomp_setup() +#define arch_decomp_wdog() + +#endif /* __PLAT_UNCOMPRESS_H */ |