diff options
Diffstat (limited to 'arch/arm/plat-omap/devices.c')
| -rw-r--r-- | arch/arm/plat-omap/devices.c | 214 |
1 files changed, 214 insertions, 0 deletions
diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c new file mode 100644 index 00000000..60278f47 --- /dev/null +++ b/arch/arm/plat-omap/devices.c @@ -0,0 +1,214 @@ +/* + * linux/arch/arm/plat-omap/devices.c + * + * Common platform device setup/initialization for OMAP1 and OMAP2 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ +#include <linux/gpio.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/io.h> +#include <linux/slab.h> +#include <linux/memblock.h> + +#include <mach/hardware.h> +#include <asm/mach-types.h> +#include <asm/mach/map.h> +#include <asm/memblock.h> + +#include <plat/tc.h> +#include <plat/board.h> +#include <plat/mmc.h> +#include <plat/menelaus.h> +#include <plat/omap44xx.h> + +#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) || \ + defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE) + +#define OMAP_MMC_NR_RES 2 + +/* + * Register MMC devices. Called from mach-omap1 and mach-omap2 device init. + */ +int __init omap_mmc_add(const char *name, int id, unsigned long base, + unsigned long size, unsigned int irq, + struct omap_mmc_platform_data *data) +{ + struct platform_device *pdev; + struct resource res[OMAP_MMC_NR_RES]; + int ret; + + pdev = platform_device_alloc(name, id); + if (!pdev) + return -ENOMEM; + + memset(res, 0, OMAP_MMC_NR_RES * sizeof(struct resource)); + res[0].start = base; + res[0].end = base + size - 1; + res[0].flags = IORESOURCE_MEM; + res[1].start = res[1].end = irq; + res[1].flags = IORESOURCE_IRQ; + + ret = platform_device_add_resources(pdev, res, ARRAY_SIZE(res)); + if (ret == 0) + ret = platform_device_add_data(pdev, data, sizeof(*data)); + if (ret) + goto fail; + + ret = platform_device_add(pdev); + if (ret) + goto fail; + + /* return device handle to board setup code */ + data->dev = &pdev->dev; + return 0; + +fail: + platform_device_put(pdev); + return ret; +} + +#endif + +/*-------------------------------------------------------------------------*/ + +#if defined(CONFIG_HW_RANDOM_OMAP) || defined(CONFIG_HW_RANDOM_OMAP_MODULE) + +#ifdef CONFIG_ARCH_OMAP2 +#define OMAP_RNG_BASE 0x480A0000 +#else +#define OMAP_RNG_BASE 0xfffe5000 +#endif + +static struct resource rng_resources[] = { + { + .start = OMAP_RNG_BASE, + .end = OMAP_RNG_BASE + 0x4f, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device omap_rng_device = { + .name = "omap_rng", + .id = -1, + .num_resources = ARRAY_SIZE(rng_resources), + .resource = rng_resources, +}; + +static void omap_init_rng(void) +{ + (void) platform_device_register(&omap_rng_device); +} +#else +static inline void omap_init_rng(void) {} +#endif + +/*-------------------------------------------------------------------------*/ + +/* Numbering for the SPI-capable controllers when used for SPI: + * spi = 1 + * uwire = 2 + * mmc1..2 = 3..4 + * mcbsp1..3 = 5..7 + */ + +#if defined(CONFIG_SPI_OMAP_UWIRE) || defined(CONFIG_SPI_OMAP_UWIRE_MODULE) + +#define OMAP_UWIRE_BASE 0xfffb3000 + +static struct resource uwire_resources[] = { + { + .start = OMAP_UWIRE_BASE, + .end = OMAP_UWIRE_BASE + 0x20, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device omap_uwire_device = { + .name = "omap_uwire", + .id = -1, + .num_resources = ARRAY_SIZE(uwire_resources), + .resource = uwire_resources, +}; + +static void omap_init_uwire(void) +{ + /* FIXME define and use a boot tag; not all boards will be hooking + * up devices to the microwire controller, and multi-board configs + * mean that CONFIG_SPI_OMAP_UWIRE may be configured anyway... + */ + + /* board-specific code must configure chipselects (only a few + * are normally used) and SCLK/SDI/SDO (each has two choices). + */ + (void) platform_device_register(&omap_uwire_device); +} +#else +static inline void omap_init_uwire(void) {} +#endif + +#if defined(CONFIG_TIDSPBRIDGE) || defined(CONFIG_TIDSPBRIDGE_MODULE) + +static phys_addr_t omap_dsp_phys_mempool_base; + +void __init omap_dsp_reserve_sdram_memblock(void) +{ + phys_addr_t size = CONFIG_TIDSPBRIDGE_MEMPOOL_SIZE; + phys_addr_t paddr; + + if (!size) + return; + + paddr = arm_memblock_steal(size, SZ_1M); + if (!paddr) { + pr_err("%s: failed to reserve %x bytes\n", + __func__, size); + return; + } + + omap_dsp_phys_mempool_base = paddr; +} + +phys_addr_t omap_dsp_get_mempool_base(void) +{ + return omap_dsp_phys_mempool_base; +} +EXPORT_SYMBOL(omap_dsp_get_mempool_base); +#endif + +/* + * This gets called after board-specific INIT_MACHINE, and initializes most + * on-chip peripherals accessible on this board (except for few like USB): + * + * (a) Does any "standard config" pin muxing needed. Board-specific + * code will have muxed GPIO pins and done "nonstandard" setup; + * that code could live in the boot loader. + * (b) Populating board-specific platform_data with the data drivers + * rely on to handle wiring variations. + * (c) Creating platform devices as meaningful on this board and + * with this kernel configuration. + * + * Claiming GPIOs, and setting their direction and initial values, is the + * responsibility of the device drivers. So is responding to probe(). + * + * Board-specific knowledge like creating devices or pin setup is to be + * kept out of drivers as much as possible. In particular, pin setup + * may be handled by the boot loader, and drivers should expect it will + * normally have been done by the time they're probed. + */ +static int __init omap_init_devices(void) +{ + /* please keep these calls, and their implementations above, + * in alphabetical order so they're easier to sort through. + */ + omap_init_rng(); + omap_init_uwire(); + return 0; +} +arch_initcall(omap_init_devices); |