diff options
Diffstat (limited to 'arch/arm/mach-mmp/pxa168.c')
| -rw-r--r-- | arch/arm/mach-mmp/pxa168.c | 228 |
1 files changed, 228 insertions, 0 deletions
diff --git a/arch/arm/mach-mmp/pxa168.c b/arch/arm/mach-mmp/pxa168.c new file mode 100644 index 00000000..b24d2c32 --- /dev/null +++ b/arch/arm/mach-mmp/pxa168.c @@ -0,0 +1,228 @@ +/* + * linux/arch/arm/mach-mmp/pxa168.c + * + * Code specific to PXA168 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/list.h> +#include <linux/io.h> +#include <linux/clk.h> +#include <linux/platform_device.h> + +#include <asm/mach/time.h> +#include <asm/system_misc.h> +#include <mach/addr-map.h> +#include <mach/cputype.h> +#include <mach/regs-apbc.h> +#include <mach/regs-apmu.h> +#include <mach/irqs.h> +#include <mach/dma.h> +#include <mach/devices.h> +#include <mach/mfp.h> +#include <linux/dma-mapping.h> +#include <mach/pxa168.h> + +#include "common.h" +#include "clock.h" + +#define MFPR_VIRT_BASE (APB_VIRT_BASE + 0x1e000) + +static struct mfp_addr_map pxa168_mfp_addr_map[] __initdata = +{ + MFP_ADDR_X(GPIO0, GPIO36, 0x04c), + MFP_ADDR_X(GPIO37, GPIO55, 0x000), + MFP_ADDR_X(GPIO56, GPIO123, 0x0e0), + MFP_ADDR_X(GPIO124, GPIO127, 0x0f4), + + MFP_ADDR_END, +}; + +void __init pxa168_init_irq(void) +{ + icu_init_irq(); +} + +/* APB peripheral clocks */ +static APBC_CLK(uart1, PXA168_UART1, 1, 14745600); +static APBC_CLK(uart2, PXA168_UART2, 1, 14745600); +static APBC_CLK(uart3, PXA168_UART3, 1, 14745600); +static APBC_CLK(twsi0, PXA168_TWSI0, 1, 33000000); +static APBC_CLK(twsi1, PXA168_TWSI1, 1, 33000000); +static APBC_CLK(pwm1, PXA168_PWM1, 1, 13000000); +static APBC_CLK(pwm2, PXA168_PWM2, 1, 13000000); +static APBC_CLK(pwm3, PXA168_PWM3, 1, 13000000); +static APBC_CLK(pwm4, PXA168_PWM4, 1, 13000000); +static APBC_CLK(ssp1, PXA168_SSP1, 4, 0); +static APBC_CLK(ssp2, PXA168_SSP2, 4, 0); +static APBC_CLK(ssp3, PXA168_SSP3, 4, 0); +static APBC_CLK(ssp4, PXA168_SSP4, 4, 0); +static APBC_CLK(ssp5, PXA168_SSP5, 4, 0); +static APBC_CLK(gpio, PXA168_GPIO, 0, 13000000); +static APBC_CLK(keypad, PXA168_KPC, 0, 32000); +static APBC_CLK(rtc, PXA168_RTC, 8, 32768); + +static APMU_CLK(nand, NAND, 0x19b, 156000000); +static APMU_CLK(lcd, LCD, 0x7f, 312000000); +static APMU_CLK(eth, ETH, 0x09, 0); +static APMU_CLK(usb, USB, 0x12, 0); + +/* device and clock bindings */ +static struct clk_lookup pxa168_clkregs[] = { + INIT_CLKREG(&clk_uart1, "pxa2xx-uart.0", NULL), + INIT_CLKREG(&clk_uart2, "pxa2xx-uart.1", NULL), + INIT_CLKREG(&clk_uart3, "pxa2xx-uart.2", NULL), + INIT_CLKREG(&clk_twsi0, "pxa2xx-i2c.0", NULL), + INIT_CLKREG(&clk_twsi1, "pxa2xx-i2c.1", NULL), + INIT_CLKREG(&clk_pwm1, "pxa168-pwm.0", NULL), + INIT_CLKREG(&clk_pwm2, "pxa168-pwm.1", NULL), + INIT_CLKREG(&clk_pwm3, "pxa168-pwm.2", NULL), + INIT_CLKREG(&clk_pwm4, "pxa168-pwm.3", NULL), + INIT_CLKREG(&clk_ssp1, "pxa168-ssp.0", NULL), + INIT_CLKREG(&clk_ssp2, "pxa168-ssp.1", NULL), + INIT_CLKREG(&clk_ssp3, "pxa168-ssp.2", NULL), + INIT_CLKREG(&clk_ssp4, "pxa168-ssp.3", NULL), + INIT_CLKREG(&clk_ssp5, "pxa168-ssp.4", NULL), + INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL), + INIT_CLKREG(&clk_lcd, "pxa168-fb", NULL), + INIT_CLKREG(&clk_gpio, "pxa-gpio", NULL), + INIT_CLKREG(&clk_keypad, "pxa27x-keypad", NULL), + INIT_CLKREG(&clk_eth, "pxa168-eth", "MFUCLK"), + INIT_CLKREG(&clk_usb, "pxa168-ehci", "PXA168-USBCLK"), + INIT_CLKREG(&clk_rtc, "sa1100-rtc", NULL), +}; + +static int __init pxa168_init(void) +{ + if (cpu_is_pxa168()) { + mfp_init_base(MFPR_VIRT_BASE); + mfp_init_addr(pxa168_mfp_addr_map); + pxa_init_dma(IRQ_PXA168_DMA_INT0, 32); + clkdev_add_table(ARRAY_AND_SIZE(pxa168_clkregs)); + } + + return 0; +} +postcore_initcall(pxa168_init); + +/* system timer - clock enabled, 3.25MHz */ +#define TIMER_CLK_RST (APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(3)) + +static void __init pxa168_timer_init(void) +{ + /* this is early, we have to initialize the CCU registers by + * ourselves instead of using clk_* API. Clock rate is defined + * by APBC_TIMERS_CLK_RST (3.25MHz) and enabled free-running + */ + __raw_writel(APBC_APBCLK | APBC_RST, APBC_PXA168_TIMERS); + + /* 3.25MHz, bus/functional clock enabled, release reset */ + __raw_writel(TIMER_CLK_RST, APBC_PXA168_TIMERS); + + timer_init(IRQ_PXA168_TIMER1); +} + +struct sys_timer pxa168_timer = { + .init = pxa168_timer_init, +}; + +void pxa168_clear_keypad_wakeup(void) +{ + uint32_t val; + uint32_t mask = APMU_PXA168_KP_WAKE_CLR; + + /* wake event clear is needed in order to clear keypad interrupt */ + val = __raw_readl(APMU_WAKE_CLR); + __raw_writel(val | mask, APMU_WAKE_CLR); +} + +/* on-chip devices */ +PXA168_DEVICE(uart1, "pxa2xx-uart", 0, UART1, 0xd4017000, 0x30, 21, 22); +PXA168_DEVICE(uart2, "pxa2xx-uart", 1, UART2, 0xd4018000, 0x30, 23, 24); +PXA168_DEVICE(uart3, "pxa2xx-uart", 2, UART3, 0xd4026000, 0x30, 23, 24); +PXA168_DEVICE(twsi0, "pxa2xx-i2c", 0, TWSI0, 0xd4011000, 0x28); +PXA168_DEVICE(twsi1, "pxa2xx-i2c", 1, TWSI1, 0xd4025000, 0x28); +PXA168_DEVICE(pwm1, "pxa168-pwm", 0, NONE, 0xd401a000, 0x10); +PXA168_DEVICE(pwm2, "pxa168-pwm", 1, NONE, 0xd401a400, 0x10); +PXA168_DEVICE(pwm3, "pxa168-pwm", 2, NONE, 0xd401a800, 0x10); +PXA168_DEVICE(pwm4, "pxa168-pwm", 3, NONE, 0xd401ac00, 0x10); +PXA168_DEVICE(nand, "pxa3xx-nand", -1, NAND, 0xd4283000, 0x80, 97, 99); +PXA168_DEVICE(ssp1, "pxa168-ssp", 0, SSP1, 0xd401b000, 0x40, 52, 53); +PXA168_DEVICE(ssp2, "pxa168-ssp", 1, SSP2, 0xd401c000, 0x40, 54, 55); +PXA168_DEVICE(ssp3, "pxa168-ssp", 2, SSP3, 0xd401f000, 0x40, 56, 57); +PXA168_DEVICE(ssp4, "pxa168-ssp", 3, SSP4, 0xd4020000, 0x40, 58, 59); +PXA168_DEVICE(ssp5, "pxa168-ssp", 4, SSP5, 0xd4021000, 0x40, 60, 61); +PXA168_DEVICE(fb, "pxa168-fb", -1, LCD, 0xd420b000, 0x1c8); +PXA168_DEVICE(keypad, "pxa27x-keypad", -1, KEYPAD, 0xd4012000, 0x4c); +PXA168_DEVICE(eth, "pxa168-eth", -1, MFU, 0xc0800000, 0x0fff); + +struct resource pxa168_resource_gpio[] = { + { + .start = 0xd4019000, + .end = 0xd4019fff, + .flags = IORESOURCE_MEM, + }, { + .start = IRQ_PXA168_GPIOX, + .end = IRQ_PXA168_GPIOX, + .name = "gpio_mux", + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device pxa168_device_gpio = { + .name = "pxa-gpio", + .id = -1, + .num_resources = ARRAY_SIZE(pxa168_resource_gpio), + .resource = pxa168_resource_gpio, +}; + +struct resource pxa168_usb_host_resources[] = { + /* USB Host conroller register base */ + [0] = { + .start = 0xd4209000, + .end = 0xd4209000 + 0x200, + .flags = IORESOURCE_MEM, + .name = "pxa168-usb-host", + }, + /* USB PHY register base */ + [1] = { + .start = 0xd4206000, + .end = 0xd4206000 + 0xff, + .flags = IORESOURCE_MEM, + .name = "pxa168-usb-phy", + }, + [2] = { + .start = IRQ_PXA168_USB2, + .end = IRQ_PXA168_USB2, + .flags = IORESOURCE_IRQ, + }, +}; + +static u64 pxa168_usb_host_dmamask = DMA_BIT_MASK(32); +struct platform_device pxa168_device_usb_host = { + .name = "pxa168-ehci", + .id = -1, + .dev = { + .dma_mask = &pxa168_usb_host_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + + .num_resources = ARRAY_SIZE(pxa168_usb_host_resources), + .resource = pxa168_usb_host_resources, +}; + +int __init pxa168_add_usb_host(struct pxa168_usb_pdata *pdata) +{ + pxa168_device_usb_host.dev.platform_data = pdata; + return platform_device_register(&pxa168_device_usb_host); +} + +void pxa168_restart(char mode, const char *cmd) +{ + soft_restart(0xffff0000); +} |