diff options
Diffstat (limited to 'arch/arm/mach-davinci/Kconfig')
| -rw-r--r-- | arch/arm/mach-davinci/Kconfig | 276 |
1 files changed, 276 insertions, 0 deletions
diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig new file mode 100644 index 00000000..32d837d8 --- /dev/null +++ b/arch/arm/mach-davinci/Kconfig @@ -0,0 +1,276 @@ +if ARCH_DAVINCI + +config AINTC + bool + +config CP_INTC + bool + +config ARCH_DAVINCI_DMx + select CPU_ARM926T + bool + +menu "TI DaVinci Implementations" + +comment "DaVinci Core Type" + +config ARCH_DAVINCI_DM644x + bool "DaVinci 644x based system" + select AINTC + select ARCH_DAVINCI_DMx + +config ARCH_DAVINCI_DM355 + bool "DaVinci 355 based system" + select AINTC + select ARCH_DAVINCI_DMx + +config ARCH_DAVINCI_DM646x + bool "DaVinci 646x based system" + select AINTC + select ARCH_DAVINCI_DMx + +config ARCH_DAVINCI_DA830 + bool "DA830/OMAP-L137/AM17x based system" + select CP_INTC + select ARCH_DAVINCI_DA8XX + select CPU_DCACHE_WRITETHROUGH # needed on silicon revs 1.0, 1.1 + +config ARCH_DAVINCI_DA850 + bool "DA850/OMAP-L138/AM18x based system" + select CP_INTC + select ARCH_DAVINCI_DA8XX + select ARCH_HAS_CPUFREQ + +config ARCH_DAVINCI_DA8XX + select CPU_ARM926T + bool + +config ARCH_DAVINCI_DM365 + bool "DaVinci 365 based system" + select AINTC + select ARCH_DAVINCI_DMx + +config ARCH_DAVINCI_TNETV107X + select CPU_V6 + select CP_INTC + bool "TNETV107X based system" + +comment "DaVinci Board Type" + +config MACH_DAVINCI_EVM + bool "TI DM644x EVM" + default ARCH_DAVINCI_DM644x + depends on ARCH_DAVINCI_DM644x + select MISC_DEVICES + select EEPROM_AT24 + select I2C + help + Configure this option to specify the whether the board used + for development is a DM644x EVM + +config MACH_SFFSDR + bool "Lyrtech SFFSDR" + depends on ARCH_DAVINCI_DM644x + select MISC_DEVICES + select EEPROM_AT24 + select I2C + help + Say Y here to select the Lyrtech Small Form Factor + Software Defined Radio (SFFSDR) board. + +config MACH_NEUROS_OSD2 + bool "Neuros OSD2 Open Television Set Top Box" + depends on ARCH_DAVINCI_DM644x + help + Configure this option to specify the whether the board used + for development is a Neuros OSD2 Open Set Top Box. + +config MACH_DAVINCI_DM355_EVM + bool "TI DM355 EVM" + default ARCH_DAVINCI_DM355 + depends on ARCH_DAVINCI_DM355 + help + Configure this option to specify the whether the board used + for development is a DM355 EVM + +config MACH_DM355_LEOPARD + bool "DM355 Leopard board" + depends on ARCH_DAVINCI_DM355 + help + Configure this option to specify the whether the board used + for development is a DM355 Leopard board. + +config MACH_DAVINCI_DM6467_EVM + bool "TI DM6467 EVM" + default ARCH_DAVINCI_DM646x + depends on ARCH_DAVINCI_DM646x + select MACH_DAVINCI_DM6467TEVM + select MISC_DEVICES + select EEPROM_AT24 + select I2C + help + Configure this option to specify the whether the board used + for development is a DM6467 EVM + +config MACH_DAVINCI_DM6467TEVM + bool + +config MACH_DAVINCI_DM365_EVM + bool "TI DM365 EVM" + default ARCH_DAVINCI_DM365 + depends on ARCH_DAVINCI_DM365 + select MISC_DEVICES + select EEPROM_AT24 + select I2C + help + Configure this option to specify whether the board used + for development is a DM365 EVM + +config MACH_DAVINCI_DA830_EVM + bool "TI DA830/OMAP-L137/AM17x Reference Platform" + default ARCH_DAVINCI_DA830 + depends on ARCH_DAVINCI_DA830 + select GPIO_PCF857X + select MISC_DEVICES + select EEPROM_AT24 + select I2C + help + Say Y here to select the TI DA830/OMAP-L137/AM17x Evaluation Module. + +choice + prompt "Select DA830/OMAP-L137/AM17x UI board peripheral" + depends on MACH_DAVINCI_DA830_EVM + help + The presence of UI card on the DA830/OMAP-L137/AM17x EVM is + detected automatically based on successful probe of the I2C + based GPIO expander on that board. This option selected in this + menu has an effect only in case of a successful UI card detection. + +config DA830_UI_LCD + bool "LCD" + help + Say Y here to use the LCD as a framebuffer or simple character + display. + +config DA830_UI_NAND + bool "NAND flash" + help + Say Y here to use the NAND flash. Do not forget to setup + the switch correctly. +endchoice + +config MACH_DAVINCI_DA850_EVM + bool "TI DA850/OMAP-L138/AM18x Reference Platform" + default ARCH_DAVINCI_DA850 + depends on ARCH_DAVINCI_DA850 + help + Say Y here to select the TI DA850/OMAP-L138/AM18x Evaluation Module. + +choice + prompt "Select peripherals connected to expander on UI board" + depends on MACH_DAVINCI_DA850_EVM + help + The presence of User Interface (UI) card on the DA850/OMAP-L138/AM18x + EVM is detected automatically based on successful probe of the I2C + based GPIO expander on that card. This option selected in this + menu has an effect only in case of a successful UI card detection. + +config DA850_UI_NONE + bool "No peripheral is enabled" + help + Say Y if you do not want to enable any of the peripherals connected + to TCA6416 expander on DA850/OMAP-L138/AM18x EVM UI card + +config DA850_UI_RMII + bool "RMII Ethernet PHY" + help + Say Y if you want to use the RMII PHY on the DA850/OMAP-L138/AM18x + EVM. This PHY is found on the UI daughter card that is supplied with + the EVM. + NOTE: Please take care while choosing this option, MII PHY will + not be functional if RMII mode is selected. + +endchoice + +config DA850_WL12XX + bool "AM18x wl1271 daughter board" + depends on MACH_DAVINCI_DA850_EVM + help + The wl1271 daughter card for AM18x EVMs is a combo wireless + connectivity add-on card, based on the LS Research TiWi module with + Texas Instruments' wl1271 solution. + Say Y if you want to use a wl1271 expansion card connected to the + AM18x EVM. + +config GPIO_PCA953X + default MACH_DAVINCI_DA850_EVM + +config KEYBOARD_GPIO_POLLED + default MACH_DAVINCI_DA850_EVM + +config MACH_TNETV107X + bool "TI TNETV107X Reference Platform" + default ARCH_DAVINCI_TNETV107X + depends on ARCH_DAVINCI_TNETV107X + help + Say Y here to select the TI TNETV107X Evaluation Module. + +config MACH_MITYOMAPL138 + bool "Critical Link MityDSP-L138/MityARM-1808 SoM" + depends on ARCH_DAVINCI_DA850 + select MISC_DEVICES + select EEPROM_AT24 + select I2C + help + Say Y here to select the Critical Link MityDSP-L138/MityARM-1808 + System on Module. Information on this SoM may be found at + http://www.mitydsp.com + +config MACH_OMAPL138_HAWKBOARD + bool "TI AM1808 / OMAPL-138 Hawkboard platform" + depends on ARCH_DAVINCI_DA850 + help + Say Y here to select the TI AM1808 / OMAPL-138 Hawkboard platform . + Information of this board may be found at + http://www.hawkboard.org/ + +config DAVINCI_MUX + bool "DAVINCI multiplexing support" + depends on ARCH_DAVINCI + default y + help + Pin multiplexing support for DAVINCI boards. If your bootloader + sets the multiplexing correctly, say N. Otherwise, or if unsure, + say Y. + +config DAVINCI_MUX_DEBUG + bool "Multiplexing debug output" + depends on DAVINCI_MUX + help + Makes the multiplexing functions print out a lot of debug info. + This is useful if you want to find out the correct values of the + multiplexing registers. + +config DAVINCI_MUX_WARNINGS + bool "Warn about pins the bootloader didn't set up" + depends on DAVINCI_MUX + help + Choose Y here to warn whenever driver initialization logic needs + to change the pin multiplexing setup. When there are no warnings + printed, it's safe to deselect DAVINCI_MUX for your product. + +config DAVINCI_RESET_CLOCKS + bool "Reset unused clocks during boot" + depends on ARCH_DAVINCI + help + Say Y if you want to reset unused clocks during boot. + This option saves power, but assumes all drivers are + using the clock framework. Broken drivers that do not + yet use clock framework may not work with this option. + If you are booting from another operating system, you + probably do not want this option enabled until your + device drivers work properly. + +endmenu + +endif |