diff options
Diffstat (limited to 'ANDROID_3.4.5/sound/soc/mxs/mxs-saif.c')
| -rw-r--r-- | ANDROID_3.4.5/sound/soc/mxs/mxs-saif.c | 762 |
1 files changed, 762 insertions, 0 deletions
diff --git a/ANDROID_3.4.5/sound/soc/mxs/mxs-saif.c b/ANDROID_3.4.5/sound/soc/mxs/mxs-saif.c new file mode 100644 index 00000000..53f4fd8f --- /dev/null +++ b/ANDROID_3.4.5/sound/soc/mxs/mxs-saif.c @@ -0,0 +1,762 @@ +/* + * Copyright 2011 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/dma-mapping.h> +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/time.h> +#include <linux/fsl/mxs-dma.h> +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <sound/saif.h> +#include <asm/mach-types.h> +#include <mach/hardware.h> +#include <mach/mxs.h> + +#include "mxs-saif.h" + +static struct mxs_saif *mxs_saif[2]; + +/* + * SAIF is a little different with other normal SOC DAIs on clock using. + * + * For MXS, two SAIF modules are instantiated on-chip. + * Each SAIF has a set of clock pins and can be operating in master + * mode simultaneously if they are connected to different off-chip codecs. + * Also, one of the two SAIFs can master or drive the clock pins while the + * other SAIF, in slave mode, receives clocking from the master SAIF. + * This also means that both SAIFs must operate at the same sample rate. + * + * We abstract this as each saif has a master, the master could be + * himself or other saifs. In the generic saif driver, saif does not need + * to know the different clkmux. Saif only needs to know who is his master + * and operating his master to generate the proper clock rate for him. + * The master id is provided in mach-specific layer according to different + * clkmux setting. + */ + +static int mxs_saif_set_dai_sysclk(struct snd_soc_dai *cpu_dai, + int clk_id, unsigned int freq, int dir) +{ + struct mxs_saif *saif = snd_soc_dai_get_drvdata(cpu_dai); + + switch (clk_id) { + case MXS_SAIF_MCLK: + saif->mclk = freq; + break; + default: + return -EINVAL; + } + return 0; +} + +/* + * Since SAIF may work on EXTMASTER mode, IOW, it's working BITCLK&LRCLK + * is provided by other SAIF, we provide a interface here to get its master + * from its master_id. + * Note that the master could be himself. + */ +static inline struct mxs_saif *mxs_saif_get_master(struct mxs_saif * saif) +{ + return mxs_saif[saif->master_id]; +} + +/* + * Set SAIF clock and MCLK + */ +static int mxs_saif_set_clk(struct mxs_saif *saif, + unsigned int mclk, + unsigned int rate) +{ + u32 scr; + int ret; + struct mxs_saif *master_saif; + + dev_dbg(saif->dev, "mclk %d rate %d\n", mclk, rate); + + /* Set master saif to generate proper clock */ + master_saif = mxs_saif_get_master(saif); + if (!master_saif) + return -EINVAL; + + dev_dbg(saif->dev, "master saif%d\n", master_saif->id); + + /* Checking if can playback and capture simutaneously */ + if (master_saif->ongoing && rate != master_saif->cur_rate) { + dev_err(saif->dev, + "can not change clock, master saif%d(rate %d) is ongoing\n", + master_saif->id, master_saif->cur_rate); + return -EINVAL; + } + + scr = __raw_readl(master_saif->base + SAIF_CTRL); + scr &= ~BM_SAIF_CTRL_BITCLK_MULT_RATE; + scr &= ~BM_SAIF_CTRL_BITCLK_BASE_RATE; + + /* + * Set SAIF clock + * + * The SAIF clock should be either 384*fs or 512*fs. + * If MCLK is used, the SAIF clk ratio need to match mclk ratio. + * For 32x mclk, set saif clk as 512*fs. + * For 48x mclk, set saif clk as 384*fs. + * + * If MCLK is not used, we just set saif clk to 512*fs. + */ + clk_prepare_enable(master_saif->clk); + + if (master_saif->mclk_in_use) { + if (mclk % 32 == 0) { + scr &= ~BM_SAIF_CTRL_BITCLK_BASE_RATE; + ret = clk_set_rate(master_saif->clk, 512 * rate); + } else if (mclk % 48 == 0) { + scr |= BM_SAIF_CTRL_BITCLK_BASE_RATE; + ret = clk_set_rate(master_saif->clk, 384 * rate); + } else { + /* SAIF MCLK should be either 32x or 48x */ + clk_disable_unprepare(master_saif->clk); + return -EINVAL; + } + } else { + ret = clk_set_rate(master_saif->clk, 512 * rate); + scr &= ~BM_SAIF_CTRL_BITCLK_BASE_RATE; + } + + clk_disable_unprepare(master_saif->clk); + + if (ret) + return ret; + + master_saif->cur_rate = rate; + + if (!master_saif->mclk_in_use) { + __raw_writel(scr, master_saif->base + SAIF_CTRL); + return 0; + } + + /* + * Program the over-sample rate for MCLK output + * + * The available MCLK range is 32x, 48x... 512x. The rate + * could be from 8kHz to 192kH. + */ + switch (mclk / rate) { + case 32: + scr |= BF_SAIF_CTRL_BITCLK_MULT_RATE(4); + break; + case 64: + scr |= BF_SAIF_CTRL_BITCLK_MULT_RATE(3); + break; + case 128: + scr |= BF_SAIF_CTRL_BITCLK_MULT_RATE(2); + break; + case 256: + scr |= BF_SAIF_CTRL_BITCLK_MULT_RATE(1); + break; + case 512: + scr |= BF_SAIF_CTRL_BITCLK_MULT_RATE(0); + break; + case 48: + scr |= BF_SAIF_CTRL_BITCLK_MULT_RATE(3); + break; + case 96: + scr |= BF_SAIF_CTRL_BITCLK_MULT_RATE(2); + break; + case 192: + scr |= BF_SAIF_CTRL_BITCLK_MULT_RATE(1); + break; + case 384: + scr |= BF_SAIF_CTRL_BITCLK_MULT_RATE(0); + break; + default: + return -EINVAL; + } + + __raw_writel(scr, master_saif->base + SAIF_CTRL); + + return 0; +} + +/* + * Put and disable MCLK. + */ +int mxs_saif_put_mclk(unsigned int saif_id) +{ + struct mxs_saif *saif = mxs_saif[saif_id]; + u32 stat; + + if (!saif) + return -EINVAL; + + stat = __raw_readl(saif->base + SAIF_STAT); + if (stat & BM_SAIF_STAT_BUSY) { + dev_err(saif->dev, "error: busy\n"); + return -EBUSY; + } + + clk_disable_unprepare(saif->clk); + + /* disable MCLK output */ + __raw_writel(BM_SAIF_CTRL_CLKGATE, + saif->base + SAIF_CTRL + MXS_SET_ADDR); + __raw_writel(BM_SAIF_CTRL_RUN, + saif->base + SAIF_CTRL + MXS_CLR_ADDR); + + saif->mclk_in_use = 0; + return 0; +} + +/* + * Get MCLK and set clock rate, then enable it + * + * This interface is used for codecs who are using MCLK provided + * by saif. + */ +int mxs_saif_get_mclk(unsigned int saif_id, unsigned int mclk, + unsigned int rate) +{ + struct mxs_saif *saif = mxs_saif[saif_id]; + u32 stat; + int ret; + struct mxs_saif *master_saif; + + if (!saif) + return -EINVAL; + + /* Clear Reset */ + __raw_writel(BM_SAIF_CTRL_SFTRST, + saif->base + SAIF_CTRL + MXS_CLR_ADDR); + + /* FIXME: need clear clk gate for register r/w */ + __raw_writel(BM_SAIF_CTRL_CLKGATE, + saif->base + SAIF_CTRL + MXS_CLR_ADDR); + + master_saif = mxs_saif_get_master(saif); + if (saif != master_saif) { + dev_err(saif->dev, "can not get mclk from a non-master saif\n"); + return -EINVAL; + } + + stat = __raw_readl(saif->base + SAIF_STAT); + if (stat & BM_SAIF_STAT_BUSY) { + dev_err(saif->dev, "error: busy\n"); + return -EBUSY; + } + + saif->mclk_in_use = 1; + ret = mxs_saif_set_clk(saif, mclk, rate); + if (ret) + return ret; + + ret = clk_prepare_enable(saif->clk); + if (ret) + return ret; + + /* enable MCLK output */ + __raw_writel(BM_SAIF_CTRL_RUN, + saif->base + SAIF_CTRL + MXS_SET_ADDR); + + return 0; +} + +/* + * SAIF DAI format configuration. + * Should only be called when port is inactive. + */ +static int mxs_saif_set_dai_fmt(struct snd_soc_dai *cpu_dai, unsigned int fmt) +{ + u32 scr, stat; + u32 scr0; + struct mxs_saif *saif = snd_soc_dai_get_drvdata(cpu_dai); + + stat = __raw_readl(saif->base + SAIF_STAT); + if (stat & BM_SAIF_STAT_BUSY) { + dev_err(cpu_dai->dev, "error: busy\n"); + return -EBUSY; + } + + scr0 = __raw_readl(saif->base + SAIF_CTRL); + scr0 = scr0 & ~BM_SAIF_CTRL_BITCLK_EDGE & ~BM_SAIF_CTRL_LRCLK_POLARITY \ + & ~BM_SAIF_CTRL_JUSTIFY & ~BM_SAIF_CTRL_DELAY; + scr = 0; + + /* DAI mode */ + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_I2S: + /* data frame low 1clk before data */ + scr |= BM_SAIF_CTRL_DELAY; + scr &= ~BM_SAIF_CTRL_LRCLK_POLARITY; + break; + case SND_SOC_DAIFMT_LEFT_J: + /* data frame high with data */ + scr &= ~BM_SAIF_CTRL_DELAY; + scr &= ~BM_SAIF_CTRL_LRCLK_POLARITY; + scr &= ~BM_SAIF_CTRL_JUSTIFY; + break; + default: + return -EINVAL; + } + + /* DAI clock inversion */ + switch (fmt & SND_SOC_DAIFMT_INV_MASK) { + case SND_SOC_DAIFMT_IB_IF: + scr |= BM_SAIF_CTRL_BITCLK_EDGE; + scr |= BM_SAIF_CTRL_LRCLK_POLARITY; + break; + case SND_SOC_DAIFMT_IB_NF: + scr |= BM_SAIF_CTRL_BITCLK_EDGE; + scr &= ~BM_SAIF_CTRL_LRCLK_POLARITY; + break; + case SND_SOC_DAIFMT_NB_IF: + scr &= ~BM_SAIF_CTRL_BITCLK_EDGE; + scr |= BM_SAIF_CTRL_LRCLK_POLARITY; + break; + case SND_SOC_DAIFMT_NB_NF: + scr &= ~BM_SAIF_CTRL_BITCLK_EDGE; + scr &= ~BM_SAIF_CTRL_LRCLK_POLARITY; + break; + } + + /* + * Note: We simply just support master mode since SAIF TX can only + * work as master. + * Here the master is relative to codec side. + * Saif internally could be slave when working on EXTMASTER mode. + * We just hide this to machine driver. + */ + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { + case SND_SOC_DAIFMT_CBS_CFS: + if (saif->id == saif->master_id) + scr &= ~BM_SAIF_CTRL_SLAVE_MODE; + else + scr |= BM_SAIF_CTRL_SLAVE_MODE; + + __raw_writel(scr | scr0, saif->base + SAIF_CTRL); + break; + default: + return -EINVAL; + } + + return 0; +} + +static int mxs_saif_startup(struct snd_pcm_substream *substream, + struct snd_soc_dai *cpu_dai) +{ + struct mxs_saif *saif = snd_soc_dai_get_drvdata(cpu_dai); + snd_soc_dai_set_dma_data(cpu_dai, substream, &saif->dma_param); + + /* clear error status to 0 for each re-open */ + saif->fifo_underrun = 0; + saif->fifo_overrun = 0; + + /* Clear Reset for normal operations */ + __raw_writel(BM_SAIF_CTRL_SFTRST, + saif->base + SAIF_CTRL + MXS_CLR_ADDR); + + /* clear clock gate */ + __raw_writel(BM_SAIF_CTRL_CLKGATE, + saif->base + SAIF_CTRL + MXS_CLR_ADDR); + + return 0; +} + +/* + * Should only be called when port is inactive. + * although can be called multiple times by upper layers. + */ +static int mxs_saif_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *cpu_dai) +{ + struct mxs_saif *saif = snd_soc_dai_get_drvdata(cpu_dai); + u32 scr, stat; + int ret; + + /* mclk should already be set */ + if (!saif->mclk && saif->mclk_in_use) { + dev_err(cpu_dai->dev, "set mclk first\n"); + return -EINVAL; + } + + stat = __raw_readl(saif->base + SAIF_STAT); + if (stat & BM_SAIF_STAT_BUSY) { + dev_err(cpu_dai->dev, "error: busy\n"); + return -EBUSY; + } + + /* + * Set saif clk based on sample rate. + * If mclk is used, we also set mclk, if not, saif->mclk is + * default 0, means not used. + */ + ret = mxs_saif_set_clk(saif, saif->mclk, params_rate(params)); + if (ret) { + dev_err(cpu_dai->dev, "unable to get proper clk\n"); + return ret; + } + + scr = __raw_readl(saif->base + SAIF_CTRL); + + scr &= ~BM_SAIF_CTRL_WORD_LENGTH; + scr &= ~BM_SAIF_CTRL_BITCLK_48XFS_ENABLE; + switch (params_format(params)) { + case SNDRV_PCM_FORMAT_S16_LE: + scr |= BF_SAIF_CTRL_WORD_LENGTH(0); + break; + case SNDRV_PCM_FORMAT_S20_3LE: + scr |= BF_SAIF_CTRL_WORD_LENGTH(4); + scr |= BM_SAIF_CTRL_BITCLK_48XFS_ENABLE; + break; + case SNDRV_PCM_FORMAT_S24_LE: + scr |= BF_SAIF_CTRL_WORD_LENGTH(8); + scr |= BM_SAIF_CTRL_BITCLK_48XFS_ENABLE; + break; + default: + return -EINVAL; + } + + /* Tx/Rx config */ + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { + /* enable TX mode */ + scr &= ~BM_SAIF_CTRL_READ_MODE; + } else { + /* enable RX mode */ + scr |= BM_SAIF_CTRL_READ_MODE; + } + + __raw_writel(scr, saif->base + SAIF_CTRL); + return 0; +} + +static int mxs_saif_prepare(struct snd_pcm_substream *substream, + struct snd_soc_dai *cpu_dai) +{ + struct mxs_saif *saif = snd_soc_dai_get_drvdata(cpu_dai); + + /* enable FIFO error irqs */ + __raw_writel(BM_SAIF_CTRL_FIFO_ERROR_IRQ_EN, + saif->base + SAIF_CTRL + MXS_SET_ADDR); + + return 0; +} + +static int mxs_saif_trigger(struct snd_pcm_substream *substream, int cmd, + struct snd_soc_dai *cpu_dai) +{ + struct mxs_saif *saif = snd_soc_dai_get_drvdata(cpu_dai); + struct mxs_saif *master_saif; + u32 delay; + + master_saif = mxs_saif_get_master(saif); + if (!master_saif) + return -EINVAL; + + switch (cmd) { + case SNDRV_PCM_TRIGGER_START: + case SNDRV_PCM_TRIGGER_RESUME: + case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: + dev_dbg(cpu_dai->dev, "start\n"); + + clk_enable(master_saif->clk); + if (!master_saif->mclk_in_use) + __raw_writel(BM_SAIF_CTRL_RUN, + master_saif->base + SAIF_CTRL + MXS_SET_ADDR); + + /* + * If the saif's master is not himself, we also need to enable + * itself clk for its internal basic logic to work. + */ + if (saif != master_saif) { + clk_enable(saif->clk); + __raw_writel(BM_SAIF_CTRL_RUN, + saif->base + SAIF_CTRL + MXS_SET_ADDR); + } + + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { + /* + * write a data to saif data register to trigger + * the transfer + */ + __raw_writel(0, saif->base + SAIF_DATA); + } else { + /* + * read a data from saif data register to trigger + * the receive + */ + __raw_readl(saif->base + SAIF_DATA); + } + + master_saif->ongoing = 1; + + dev_dbg(saif->dev, "CTRL 0x%x STAT 0x%x\n", + __raw_readl(saif->base + SAIF_CTRL), + __raw_readl(saif->base + SAIF_STAT)); + + dev_dbg(master_saif->dev, "CTRL 0x%x STAT 0x%x\n", + __raw_readl(master_saif->base + SAIF_CTRL), + __raw_readl(master_saif->base + SAIF_STAT)); + break; + case SNDRV_PCM_TRIGGER_SUSPEND: + case SNDRV_PCM_TRIGGER_STOP: + case SNDRV_PCM_TRIGGER_PAUSE_PUSH: + dev_dbg(cpu_dai->dev, "stop\n"); + + /* wait a while for the current sample to complete */ + delay = USEC_PER_SEC / master_saif->cur_rate; + + if (!master_saif->mclk_in_use) { + __raw_writel(BM_SAIF_CTRL_RUN, + master_saif->base + SAIF_CTRL + MXS_CLR_ADDR); + udelay(delay); + } + clk_disable(master_saif->clk); + + if (saif != master_saif) { + __raw_writel(BM_SAIF_CTRL_RUN, + saif->base + SAIF_CTRL + MXS_CLR_ADDR); + udelay(delay); + clk_disable(saif->clk); + } + + master_saif->ongoing = 0; + + break; + default: + return -EINVAL; + } + + return 0; +} + +#define MXS_SAIF_RATES SNDRV_PCM_RATE_8000_192000 +#define MXS_SAIF_FORMATS \ + (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE | \ + SNDRV_PCM_FMTBIT_S24_LE) + +static const struct snd_soc_dai_ops mxs_saif_dai_ops = { + .startup = mxs_saif_startup, + .trigger = mxs_saif_trigger, + .prepare = mxs_saif_prepare, + .hw_params = mxs_saif_hw_params, + .set_sysclk = mxs_saif_set_dai_sysclk, + .set_fmt = mxs_saif_set_dai_fmt, +}; + +static int mxs_saif_dai_probe(struct snd_soc_dai *dai) +{ + struct mxs_saif *saif = dev_get_drvdata(dai->dev); + + snd_soc_dai_set_drvdata(dai, saif); + + return 0; +} + +static struct snd_soc_dai_driver mxs_saif_dai = { + .name = "mxs-saif", + .probe = mxs_saif_dai_probe, + .playback = { + .channels_min = 2, + .channels_max = 2, + .rates = MXS_SAIF_RATES, + .formats = MXS_SAIF_FORMATS, + }, + .capture = { + .channels_min = 2, + .channels_max = 2, + .rates = MXS_SAIF_RATES, + .formats = MXS_SAIF_FORMATS, + }, + .ops = &mxs_saif_dai_ops, +}; + +static irqreturn_t mxs_saif_irq(int irq, void *dev_id) +{ + struct mxs_saif *saif = dev_id; + unsigned int stat; + + stat = __raw_readl(saif->base + SAIF_STAT); + if (!(stat & (BM_SAIF_STAT_FIFO_UNDERFLOW_IRQ | + BM_SAIF_STAT_FIFO_OVERFLOW_IRQ))) + return IRQ_NONE; + + if (stat & BM_SAIF_STAT_FIFO_UNDERFLOW_IRQ) { + dev_dbg(saif->dev, "underrun!!! %d\n", ++saif->fifo_underrun); + __raw_writel(BM_SAIF_STAT_FIFO_UNDERFLOW_IRQ, + saif->base + SAIF_STAT + MXS_CLR_ADDR); + } + + if (stat & BM_SAIF_STAT_FIFO_OVERFLOW_IRQ) { + dev_dbg(saif->dev, "overrun!!! %d\n", ++saif->fifo_overrun); + __raw_writel(BM_SAIF_STAT_FIFO_OVERFLOW_IRQ, + saif->base + SAIF_STAT + MXS_CLR_ADDR); + } + + dev_dbg(saif->dev, "SAIF_CTRL %x SAIF_STAT %x\n", + __raw_readl(saif->base + SAIF_CTRL), + __raw_readl(saif->base + SAIF_STAT)); + + return IRQ_HANDLED; +} + +static int mxs_saif_probe(struct platform_device *pdev) +{ + struct resource *iores, *dmares; + struct mxs_saif *saif; + struct mxs_saif_platform_data *pdata; + int ret = 0; + + if (pdev->id >= ARRAY_SIZE(mxs_saif)) + return -EINVAL; + + saif = devm_kzalloc(&pdev->dev, sizeof(*saif), GFP_KERNEL); + if (!saif) + return -ENOMEM; + + mxs_saif[pdev->id] = saif; + saif->id = pdev->id; + + pdata = pdev->dev.platform_data; + if (pdata && !pdata->master_mode) { + saif->master_id = pdata->master_id; + if (saif->master_id < 0 || + saif->master_id >= ARRAY_SIZE(mxs_saif) || + saif->master_id == saif->id) { + dev_err(&pdev->dev, "get wrong master id\n"); + return -EINVAL; + } + } else { + saif->master_id = saif->id; + } + + saif->clk = clk_get(&pdev->dev, NULL); + if (IS_ERR(saif->clk)) { + ret = PTR_ERR(saif->clk); + dev_err(&pdev->dev, "Cannot get the clock: %d\n", + ret); + return ret; + } + + iores = platform_get_resource(pdev, IORESOURCE_MEM, 0); + + saif->base = devm_request_and_ioremap(&pdev->dev, iores); + if (!saif->base) { + dev_err(&pdev->dev, "ioremap failed\n"); + ret = -ENODEV; + goto failed_get_resource; + } + + dmares = platform_get_resource(pdev, IORESOURCE_DMA, 0); + if (!dmares) { + ret = -ENODEV; + dev_err(&pdev->dev, "failed to get dma resource: %d\n", + ret); + goto failed_get_resource; + } + saif->dma_param.chan_num = dmares->start; + + saif->irq = platform_get_irq(pdev, 0); + if (saif->irq < 0) { + ret = saif->irq; + dev_err(&pdev->dev, "failed to get irq resource: %d\n", + ret); + goto failed_get_resource; + } + + saif->dev = &pdev->dev; + ret = devm_request_irq(&pdev->dev, saif->irq, mxs_saif_irq, 0, + "mxs-saif", saif); + if (ret) { + dev_err(&pdev->dev, "failed to request irq\n"); + goto failed_get_resource; + } + + saif->dma_param.chan_irq = platform_get_irq(pdev, 1); + if (saif->dma_param.chan_irq < 0) { + ret = saif->dma_param.chan_irq; + dev_err(&pdev->dev, "failed to get dma irq resource: %d\n", + ret); + goto failed_get_resource; + } + + platform_set_drvdata(pdev, saif); + + ret = snd_soc_register_dai(&pdev->dev, &mxs_saif_dai); + if (ret) { + dev_err(&pdev->dev, "register DAI failed\n"); + goto failed_get_resource; + } + + saif->soc_platform_pdev = platform_device_alloc( + "mxs-pcm-audio", pdev->id); + if (!saif->soc_platform_pdev) { + ret = -ENOMEM; + goto failed_pdev_alloc; + } + + platform_set_drvdata(saif->soc_platform_pdev, saif); + ret = platform_device_add(saif->soc_platform_pdev); + if (ret) { + dev_err(&pdev->dev, "failed to add soc platform device\n"); + goto failed_pdev_add; + } + + return 0; + +failed_pdev_add: + platform_device_put(saif->soc_platform_pdev); +failed_pdev_alloc: + snd_soc_unregister_dai(&pdev->dev); +failed_get_resource: + clk_put(saif->clk); + + return ret; +} + +static int __devexit mxs_saif_remove(struct platform_device *pdev) +{ + struct mxs_saif *saif = platform_get_drvdata(pdev); + + platform_device_unregister(saif->soc_platform_pdev); + snd_soc_unregister_dai(&pdev->dev); + clk_put(saif->clk); + + return 0; +} + +static struct platform_driver mxs_saif_driver = { + .probe = mxs_saif_probe, + .remove = __devexit_p(mxs_saif_remove), + + .driver = { + .name = "mxs-saif", + .owner = THIS_MODULE, + }, +}; + +module_platform_driver(mxs_saif_driver); + +MODULE_AUTHOR("Freescale Semiconductor, Inc."); +MODULE_DESCRIPTION("MXS ASoC SAIF driver"); +MODULE_LICENSE("GPL"); |