diff options
Diffstat (limited to 'ANDROID_3.4.5/sound/pci/echoaudio/gina24_dsp.c')
| -rw-r--r-- | ANDROID_3.4.5/sound/pci/echoaudio/gina24_dsp.c | 349 |
1 files changed, 0 insertions, 349 deletions
diff --git a/ANDROID_3.4.5/sound/pci/echoaudio/gina24_dsp.c b/ANDROID_3.4.5/sound/pci/echoaudio/gina24_dsp.c deleted file mode 100644 index 98f7cfa8..00000000 --- a/ANDROID_3.4.5/sound/pci/echoaudio/gina24_dsp.c +++ /dev/null @@ -1,349 +0,0 @@ -/**************************************************************************** - - Copyright Echo Digital Audio Corporation (c) 1998 - 2004 - All rights reserved - www.echoaudio.com - - This file is part of Echo Digital Audio's generic driver library. - - Echo Digital Audio's generic driver library is free software; - you can redistribute it and/or modify it under the terms of - the GNU General Public License as published by the Free Software - Foundation. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 59 Temple Place - Suite 330, Boston, - MA 02111-1307, USA. - - ************************************************************************* - - Translation from C++ and adaptation for use in ALSA-Driver - were made by Giuliano Pochini <pochini@shiny.it> - -****************************************************************************/ - - -static int write_control_reg(struct echoaudio *chip, u32 value, char force); -static int set_input_clock(struct echoaudio *chip, u16 clock); -static int set_professional_spdif(struct echoaudio *chip, char prof); -static int set_digital_mode(struct echoaudio *chip, u8 mode); -static int load_asic_generic(struct echoaudio *chip, u32 cmd, short asic); -static int check_asic_status(struct echoaudio *chip); - - -static int init_hw(struct echoaudio *chip, u16 device_id, u16 subdevice_id) -{ - int err; - - DE_INIT(("init_hw() - Gina24\n")); - if (snd_BUG_ON((subdevice_id & 0xfff0) != GINA24)) - return -ENODEV; - - if ((err = init_dsp_comm_page(chip))) { - DE_INIT(("init_hw - could not initialize DSP comm page\n")); - return err; - } - - chip->device_id = device_id; - chip->subdevice_id = subdevice_id; - chip->bad_board = TRUE; - chip->input_clock_types = - ECHO_CLOCK_BIT_INTERNAL | ECHO_CLOCK_BIT_SPDIF | - ECHO_CLOCK_BIT_ESYNC | ECHO_CLOCK_BIT_ESYNC96 | - ECHO_CLOCK_BIT_ADAT; - - /* Gina24 comes in both '301 and '361 flavors */ - if (chip->device_id == DEVICE_ID_56361) { - chip->dsp_code_to_load = FW_GINA24_361_DSP; - chip->digital_modes = - ECHOCAPS_HAS_DIGITAL_MODE_SPDIF_RCA | - ECHOCAPS_HAS_DIGITAL_MODE_SPDIF_OPTICAL | - ECHOCAPS_HAS_DIGITAL_MODE_ADAT; - } else { - chip->dsp_code_to_load = FW_GINA24_301_DSP; - chip->digital_modes = - ECHOCAPS_HAS_DIGITAL_MODE_SPDIF_RCA | - ECHOCAPS_HAS_DIGITAL_MODE_SPDIF_OPTICAL | - ECHOCAPS_HAS_DIGITAL_MODE_ADAT | - ECHOCAPS_HAS_DIGITAL_MODE_SPDIF_CDROM; - } - - if ((err = load_firmware(chip)) < 0) - return err; - chip->bad_board = FALSE; - - DE_INIT(("init_hw done\n")); - return err; -} - - - -static int set_mixer_defaults(struct echoaudio *chip) -{ - chip->digital_mode = DIGITAL_MODE_SPDIF_RCA; - chip->professional_spdif = FALSE; - chip->digital_in_automute = TRUE; - return init_line_levels(chip); -} - - - -static u32 detect_input_clocks(const struct echoaudio *chip) -{ - u32 clocks_from_dsp, clock_bits; - - /* Map the DSP clock detect bits to the generic driver clock - detect bits */ - clocks_from_dsp = le32_to_cpu(chip->comm_page->status_clocks); - - clock_bits = ECHO_CLOCK_BIT_INTERNAL; - - if (clocks_from_dsp & GML_CLOCK_DETECT_BIT_SPDIF) - clock_bits |= ECHO_CLOCK_BIT_SPDIF; - - if (clocks_from_dsp & GML_CLOCK_DETECT_BIT_ADAT) - clock_bits |= ECHO_CLOCK_BIT_ADAT; - - if (clocks_from_dsp & GML_CLOCK_DETECT_BIT_ESYNC) - clock_bits |= ECHO_CLOCK_BIT_ESYNC | ECHO_CLOCK_BIT_ESYNC96; - - return clock_bits; -} - - - -/* Gina24 has an ASIC on the PCI card which must be loaded for anything -interesting to happen. */ -static int load_asic(struct echoaudio *chip) -{ - u32 control_reg; - int err; - short asic; - - if (chip->asic_loaded) - return 1; - - /* Give the DSP a few milliseconds to settle down */ - mdelay(10); - - /* Pick the correct ASIC for '301 or '361 Gina24 */ - if (chip->device_id == DEVICE_ID_56361) - asic = FW_GINA24_361_ASIC; - else - asic = FW_GINA24_301_ASIC; - - err = load_asic_generic(chip, DSP_FNC_LOAD_GINA24_ASIC, asic); - if (err < 0) - return err; - - chip->asic_code = asic; - - /* Now give the new ASIC a little time to set up */ - mdelay(10); - /* See if it worked */ - err = check_asic_status(chip); - - /* Set up the control register if the load succeeded - - 48 kHz, internal clock, S/PDIF RCA mode */ - if (!err) { - control_reg = GML_CONVERTER_ENABLE | GML_48KHZ; - err = write_control_reg(chip, control_reg, TRUE); - } - DE_INIT(("load_asic() done\n")); - return err; -} - - - -static int set_sample_rate(struct echoaudio *chip, u32 rate) -{ - u32 control_reg, clock; - - if (snd_BUG_ON(rate >= 50000 && - chip->digital_mode == DIGITAL_MODE_ADAT)) - return -EINVAL; - - /* Only set the clock for internal mode. */ - if (chip->input_clock != ECHO_CLOCK_INTERNAL) { - DE_ACT(("set_sample_rate: Cannot set sample rate - " - "clock not set to CLK_CLOCKININTERNAL\n")); - /* Save the rate anyhow */ - chip->comm_page->sample_rate = cpu_to_le32(rate); - chip->sample_rate = rate; - return 0; - } - - clock = 0; - - control_reg = le32_to_cpu(chip->comm_page->control_register); - control_reg &= GML_CLOCK_CLEAR_MASK & GML_SPDIF_RATE_CLEAR_MASK; - - switch (rate) { - case 96000: - clock = GML_96KHZ; - break; - case 88200: - clock = GML_88KHZ; - break; - case 48000: - clock = GML_48KHZ | GML_SPDIF_SAMPLE_RATE1; - break; - case 44100: - clock = GML_44KHZ; - /* Professional mode ? */ - if (control_reg & GML_SPDIF_PRO_MODE) - clock |= GML_SPDIF_SAMPLE_RATE0; - break; - case 32000: - clock = GML_32KHZ | GML_SPDIF_SAMPLE_RATE0 | - GML_SPDIF_SAMPLE_RATE1; - break; - case 22050: - clock = GML_22KHZ; - break; - case 16000: - clock = GML_16KHZ; - break; - case 11025: - clock = GML_11KHZ; - break; - case 8000: - clock = GML_8KHZ; - break; - default: - DE_ACT(("set_sample_rate: %d invalid!\n", rate)); - return -EINVAL; - } - - control_reg |= clock; - - chip->comm_page->sample_rate = cpu_to_le32(rate); /* ignored by the DSP */ - chip->sample_rate = rate; - DE_ACT(("set_sample_rate: %d clock %d\n", rate, clock)); - - return write_control_reg(chip, control_reg, FALSE); -} - - - -static int set_input_clock(struct echoaudio *chip, u16 clock) -{ - u32 control_reg, clocks_from_dsp; - - DE_ACT(("set_input_clock:\n")); - - /* Mask off the clock select bits */ - control_reg = le32_to_cpu(chip->comm_page->control_register) & - GML_CLOCK_CLEAR_MASK; - clocks_from_dsp = le32_to_cpu(chip->comm_page->status_clocks); - - switch (clock) { - case ECHO_CLOCK_INTERNAL: - DE_ACT(("Set Gina24 clock to INTERNAL\n")); - chip->input_clock = ECHO_CLOCK_INTERNAL; - return set_sample_rate(chip, chip->sample_rate); - case ECHO_CLOCK_SPDIF: - if (chip->digital_mode == DIGITAL_MODE_ADAT) - return -EAGAIN; - DE_ACT(("Set Gina24 clock to SPDIF\n")); - control_reg |= GML_SPDIF_CLOCK; - if (clocks_from_dsp & GML_CLOCK_DETECT_BIT_SPDIF96) - control_reg |= GML_DOUBLE_SPEED_MODE; - else - control_reg &= ~GML_DOUBLE_SPEED_MODE; - break; - case ECHO_CLOCK_ADAT: - if (chip->digital_mode != DIGITAL_MODE_ADAT) - return -EAGAIN; - DE_ACT(("Set Gina24 clock to ADAT\n")); - control_reg |= GML_ADAT_CLOCK; - control_reg &= ~GML_DOUBLE_SPEED_MODE; - break; - case ECHO_CLOCK_ESYNC: - DE_ACT(("Set Gina24 clock to ESYNC\n")); - control_reg |= GML_ESYNC_CLOCK; - control_reg &= ~GML_DOUBLE_SPEED_MODE; - break; - case ECHO_CLOCK_ESYNC96: - DE_ACT(("Set Gina24 clock to ESYNC96\n")); - control_reg |= GML_ESYNC_CLOCK | GML_DOUBLE_SPEED_MODE; - break; - default: - DE_ACT(("Input clock 0x%x not supported for Gina24\n", clock)); - return -EINVAL; - } - - chip->input_clock = clock; - return write_control_reg(chip, control_reg, TRUE); -} - - - -static int dsp_set_digital_mode(struct echoaudio *chip, u8 mode) -{ - u32 control_reg; - int err, incompatible_clock; - - /* Set clock to "internal" if it's not compatible with the new mode */ - incompatible_clock = FALSE; - switch (mode) { - case DIGITAL_MODE_SPDIF_OPTICAL: - case DIGITAL_MODE_SPDIF_CDROM: - case DIGITAL_MODE_SPDIF_RCA: - if (chip->input_clock == ECHO_CLOCK_ADAT) - incompatible_clock = TRUE; - break; - case DIGITAL_MODE_ADAT: - if (chip->input_clock == ECHO_CLOCK_SPDIF) - incompatible_clock = TRUE; - break; - default: - DE_ACT(("Digital mode not supported: %d\n", mode)); - return -EINVAL; - } - - spin_lock_irq(&chip->lock); - - if (incompatible_clock) { /* Switch to 48KHz, internal */ - chip->sample_rate = 48000; - set_input_clock(chip, ECHO_CLOCK_INTERNAL); - } - - /* Clear the current digital mode */ - control_reg = le32_to_cpu(chip->comm_page->control_register); - control_reg &= GML_DIGITAL_MODE_CLEAR_MASK; - - /* Tweak the control reg */ - switch (mode) { - case DIGITAL_MODE_SPDIF_OPTICAL: - control_reg |= GML_SPDIF_OPTICAL_MODE; - break; - case DIGITAL_MODE_SPDIF_CDROM: - /* '361 Gina24 cards do not have the S/PDIF CD-ROM mode */ - if (chip->device_id == DEVICE_ID_56301) - control_reg |= GML_SPDIF_CDROM_MODE; - break; - case DIGITAL_MODE_SPDIF_RCA: - /* GML_SPDIF_OPTICAL_MODE bit cleared */ - break; - case DIGITAL_MODE_ADAT: - control_reg |= GML_ADAT_MODE; - control_reg &= ~GML_DOUBLE_SPEED_MODE; - break; - } - - err = write_control_reg(chip, control_reg, TRUE); - spin_unlock_irq(&chip->lock); - if (err < 0) - return err; - chip->digital_mode = mode; - - DE_ACT(("set_digital_mode to %d\n", chip->digital_mode)); - return incompatible_clock; -} |