1 files changed, 0 insertions, 46 deletions
diff --git a/ANDROID_3.4.5/include/linux/usb/isp1362.h b/ANDROID_3.4.5/include/linux/usb/isp1362.h
deleted file mode 100644
index 642684bb..00000000
--- a/ANDROID_3.4.5/include/linux/usb/isp1362.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * board initialization code should put one of these into dev->platform_data
- * and place the isp1362 onto platform_bus.
- */
-
-#ifndef __LINUX_USB_ISP1362_H__
-#define __LINUX_USB_ISP1362_H__
-
-struct isp1362_platform_data {
-	/* Enable internal pulldown resistors on downstream ports */
-	unsigned sel15Kres:1;
-	/* Clock cannot be stopped */
-	unsigned clknotstop:1;
-	/* On-chip overcurrent protection */
-	unsigned oc_enable:1;
-	/* INT output polarity */
-	unsigned int_act_high:1;
-	/* INT edge or level triggered */
-	unsigned int_edge_triggered:1;
-	/* DREQ output polarity */
-	unsigned dreq_act_high:1;
-	/* DACK input polarity */
-	unsigned dack_act_high:1;
-	/* chip can be resumed via H_WAKEUP pin */
-	unsigned remote_wakeup_connected:1;
-	/* Switch or not to switch (keep always powered) */
-	unsigned no_power_switching:1;
-	/* Ganged port power switching (0) or individual port power switching (1) */
-	unsigned power_switching_mode:1;
-	/* Given port_power, msec/2 after power on till power good */
-	u8 potpg;
-	/* Hardware reset set/clear */
-	void (*reset) (struct device *dev, int set);
-	/* Clock start/stop */
-	void (*clock) (struct device *dev, int start);
-	/* Inter-io delay (ns). The chip is picky about access timings; it
-	 * expects at least:
-	 * 110ns delay between consecutive accesses to DATA_REG,
-	 * 300ns delay between access to ADDR_REG and DATA_REG (registers)
-	 * 462ns delay between access to ADDR_REG and DATA_REG (buffer memory)
-	 * WE MUST NOT be activated during these intervals (even without CS!)
-	 */
-	void (*delay) (struct device *dev, unsigned int delay);
-};
-
-#endif