diff options
Diffstat (limited to 'ANDROID_3.4.5/include/linux/i2c')
29 files changed, 0 insertions, 2584 deletions
diff --git a/ANDROID_3.4.5/include/linux/i2c/adp5588.h b/ANDROID_3.4.5/include/linux/i2c/adp5588.h deleted file mode 100644 index cec17cf6..00000000 --- a/ANDROID_3.4.5/include/linux/i2c/adp5588.h +++ /dev/null @@ -1,171 +0,0 @@ -/* - * Analog Devices ADP5588 I/O Expander and QWERTY Keypad Controller - * - * Copyright 2009-2010 Analog Devices Inc. - * - * Licensed under the GPL-2 or later. - */ - -#ifndef _ADP5588_H -#define _ADP5588_H - -#define DEV_ID 0x00 /* Device ID */ -#define CFG 0x01 /* Configuration Register1 */ -#define INT_STAT 0x02 /* Interrupt Status Register */ -#define KEY_LCK_EC_STAT 0x03 /* Key Lock and Event Counter Register */ -#define Key_EVENTA 0x04 /* Key Event Register A */ -#define Key_EVENTB 0x05 /* Key Event Register B */ -#define Key_EVENTC 0x06 /* Key Event Register C */ -#define Key_EVENTD 0x07 /* Key Event Register D */ -#define Key_EVENTE 0x08 /* Key Event Register E */ -#define Key_EVENTF 0x09 /* Key Event Register F */ -#define Key_EVENTG 0x0A /* Key Event Register G */ -#define Key_EVENTH 0x0B /* Key Event Register H */ -#define Key_EVENTI 0x0C /* Key Event Register I */ -#define Key_EVENTJ 0x0D /* Key Event Register J */ -#define KP_LCK_TMR 0x0E /* Keypad Lock1 to Lock2 Timer */ -#define UNLOCK1 0x0F /* Unlock Key1 */ -#define UNLOCK2 0x10 /* Unlock Key2 */ -#define GPIO_INT_STAT1 0x11 /* GPIO Interrupt Status */ -#define GPIO_INT_STAT2 0x12 /* GPIO Interrupt Status */ -#define GPIO_INT_STAT3 0x13 /* GPIO Interrupt Status */ -#define GPIO_DAT_STAT1 0x14 /* GPIO Data Status, Read twice to clear */ -#define GPIO_DAT_STAT2 0x15 /* GPIO Data Status, Read twice to clear */ -#define GPIO_DAT_STAT3 0x16 /* GPIO Data Status, Read twice to clear */ -#define GPIO_DAT_OUT1 0x17 /* GPIO DATA OUT */ -#define GPIO_DAT_OUT2 0x18 /* GPIO DATA OUT */ -#define GPIO_DAT_OUT3 0x19 /* GPIO DATA OUT */ -#define GPIO_INT_EN1 0x1A /* GPIO Interrupt Enable */ -#define GPIO_INT_EN2 0x1B /* GPIO Interrupt Enable */ -#define GPIO_INT_EN3 0x1C /* GPIO Interrupt Enable */ -#define KP_GPIO1 0x1D /* Keypad or GPIO Selection */ -#define KP_GPIO2 0x1E /* Keypad or GPIO Selection */ -#define KP_GPIO3 0x1F /* Keypad or GPIO Selection */ -#define GPI_EM1 0x20 /* GPI Event Mode 1 */ -#define GPI_EM2 0x21 /* GPI Event Mode 2 */ -#define GPI_EM3 0x22 /* GPI Event Mode 3 */ -#define GPIO_DIR1 0x23 /* GPIO Data Direction */ -#define GPIO_DIR2 0x24 /* GPIO Data Direction */ -#define GPIO_DIR3 0x25 /* GPIO Data Direction */ -#define GPIO_INT_LVL1 0x26 /* GPIO Edge/Level Detect */ -#define GPIO_INT_LVL2 0x27 /* GPIO Edge/Level Detect */ -#define GPIO_INT_LVL3 0x28 /* GPIO Edge/Level Detect */ -#define Debounce_DIS1 0x29 /* Debounce Disable */ -#define Debounce_DIS2 0x2A /* Debounce Disable */ -#define Debounce_DIS3 0x2B /* Debounce Disable */ -#define GPIO_PULL1 0x2C /* GPIO Pull Disable */ -#define GPIO_PULL2 0x2D /* GPIO Pull Disable */ -#define GPIO_PULL3 0x2E /* GPIO Pull Disable */ -#define CMP_CFG_STAT 0x30 /* Comparator Configuration and Status Register */ -#define CMP_CONFG_SENS1 0x31 /* Sensor1 Comparator Configuration Register */ -#define CMP_CONFG_SENS2 0x32 /* L2 Light Sensor Reference Level, Output Falling for Sensor 1 */ -#define CMP1_LVL2_TRIP 0x33 /* L2 Light Sensor Hysteresis (Active when Output Rising) for Sensor 1 */ -#define CMP1_LVL2_HYS 0x34 /* L3 Light Sensor Reference Level, Output Falling For Sensor 1 */ -#define CMP1_LVL3_TRIP 0x35 /* L3 Light Sensor Hysteresis (Active when Output Rising) For Sensor 1 */ -#define CMP1_LVL3_HYS 0x36 /* Sensor 2 Comparator Configuration Register */ -#define CMP2_LVL2_TRIP 0x37 /* L2 Light Sensor Reference Level, Output Falling for Sensor 2 */ -#define CMP2_LVL2_HYS 0x38 /* L2 Light Sensor Hysteresis (Active when Output Rising) for Sensor 2 */ -#define CMP2_LVL3_TRIP 0x39 /* L3 Light Sensor Reference Level, Output Falling For Sensor 2 */ -#define CMP2_LVL3_HYS 0x3A /* L3 Light Sensor Hysteresis (Active when Output Rising) For Sensor 2 */ -#define CMP1_ADC_DAT_R1 0x3B /* Comparator 1 ADC data Register1 */ -#define CMP1_ADC_DAT_R2 0x3C /* Comparator 1 ADC data Register2 */ -#define CMP2_ADC_DAT_R1 0x3D /* Comparator 2 ADC data Register1 */ -#define CMP2_ADC_DAT_R2 0x3E /* Comparator 2 ADC data Register2 */ - -#define ADP5588_DEVICE_ID_MASK 0xF - - /* Configuration Register1 */ -#define ADP5588_AUTO_INC (1 << 7) -#define ADP5588_GPIEM_CFG (1 << 6) -#define ADP5588_OVR_FLOW_M (1 << 5) -#define ADP5588_INT_CFG (1 << 4) -#define ADP5588_OVR_FLOW_IEN (1 << 3) -#define ADP5588_K_LCK_IM (1 << 2) -#define ADP5588_GPI_IEN (1 << 1) -#define ADP5588_KE_IEN (1 << 0) - -/* Interrupt Status Register */ -#define ADP5588_CMP2_INT (1 << 5) -#define ADP5588_CMP1_INT (1 << 4) -#define ADP5588_OVR_FLOW_INT (1 << 3) -#define ADP5588_K_LCK_INT (1 << 2) -#define ADP5588_GPI_INT (1 << 1) -#define ADP5588_KE_INT (1 << 0) - -/* Key Lock and Event Counter Register */ -#define ADP5588_K_LCK_EN (1 << 6) -#define ADP5588_LCK21 0x30 -#define ADP5588_KEC 0xF - -#define ADP5588_MAXGPIO 18 -#define ADP5588_BANK(offs) ((offs) >> 3) -#define ADP5588_BIT(offs) (1u << ((offs) & 0x7)) - -/* Put one of these structures in i2c_board_info platform_data */ - -#define ADP5588_KEYMAPSIZE 80 - -#define GPI_PIN_ROW0 97 -#define GPI_PIN_ROW1 98 -#define GPI_PIN_ROW2 99 -#define GPI_PIN_ROW3 100 -#define GPI_PIN_ROW4 101 -#define GPI_PIN_ROW5 102 -#define GPI_PIN_ROW6 103 -#define GPI_PIN_ROW7 104 -#define GPI_PIN_COL0 105 -#define GPI_PIN_COL1 106 -#define GPI_PIN_COL2 107 -#define GPI_PIN_COL3 108 -#define GPI_PIN_COL4 109 -#define GPI_PIN_COL5 110 -#define GPI_PIN_COL6 111 -#define GPI_PIN_COL7 112 -#define GPI_PIN_COL8 113 -#define GPI_PIN_COL9 114 - -#define GPI_PIN_ROW_BASE GPI_PIN_ROW0 -#define GPI_PIN_ROW_END GPI_PIN_ROW7 -#define GPI_PIN_COL_BASE GPI_PIN_COL0 -#define GPI_PIN_COL_END GPI_PIN_COL9 - -#define GPI_PIN_BASE GPI_PIN_ROW_BASE -#define GPI_PIN_END GPI_PIN_COL_END - -#define ADP5588_GPIMAPSIZE_MAX (GPI_PIN_END - GPI_PIN_BASE + 1) - -struct adp5588_gpi_map { - unsigned short pin; - unsigned short sw_evt; -}; - -struct adp5588_kpad_platform_data { - int rows; /* Number of rows */ - int cols; /* Number of columns */ - const unsigned short *keymap; /* Pointer to keymap */ - unsigned short keymapsize; /* Keymap size */ - unsigned repeat:1; /* Enable key repeat */ - unsigned en_keylock:1; /* Enable Key Lock feature */ - unsigned short unlock_key1; /* Unlock Key 1 */ - unsigned short unlock_key2; /* Unlock Key 2 */ - const struct adp5588_gpi_map *gpimap; - unsigned short gpimapsize; - const struct adp5588_gpio_platform_data *gpio_data; -}; - -struct i2c_client; /* forward declaration */ - -struct adp5588_gpio_platform_data { - int gpio_start; /* GPIO Chip base # */ - unsigned irq_base; /* interrupt base # */ - unsigned pullup_dis_mask; /* Pull-Up Disable Mask */ - int (*setup)(struct i2c_client *client, - int gpio, unsigned ngpio, - void *context); - int (*teardown)(struct i2c_client *client, - int gpio, unsigned ngpio, - void *context); - void *context; -}; - -#endif diff --git a/ANDROID_3.4.5/include/linux/i2c/adp8860.h b/ANDROID_3.4.5/include/linux/i2c/adp8860.h deleted file mode 100644 index 0b4d3985..00000000 --- a/ANDROID_3.4.5/include/linux/i2c/adp8860.h +++ /dev/null @@ -1,154 +0,0 @@ -/* - * Definitions and platform data for Analog Devices - * Backlight drivers ADP8860 - * - * Copyright 2009-2010 Analog Devices Inc. - * - * Licensed under the GPL-2 or later. - */ - -#ifndef __LINUX_I2C_ADP8860_H -#define __LINUX_I2C_ADP8860_H - -#include <linux/leds.h> -#include <linux/types.h> - -#define ID_ADP8860 8860 - -#define ADP8860_MAX_BRIGHTNESS 0x7F -#define FLAG_OFFT_SHIFT 8 - -/* - * LEDs subdevice platform data - */ - -#define ADP8860_LED_DIS_BLINK (0 << FLAG_OFFT_SHIFT) -#define ADP8860_LED_OFFT_600ms (1 << FLAG_OFFT_SHIFT) -#define ADP8860_LED_OFFT_1200ms (2 << FLAG_OFFT_SHIFT) -#define ADP8860_LED_OFFT_1800ms (3 << FLAG_OFFT_SHIFT) - -#define ADP8860_LED_ONT_200ms 0 -#define ADP8860_LED_ONT_600ms 1 -#define ADP8860_LED_ONT_800ms 2 -#define ADP8860_LED_ONT_1200ms 3 - -#define ADP8860_LED_D7 (7) -#define ADP8860_LED_D6 (6) -#define ADP8860_LED_D5 (5) -#define ADP8860_LED_D4 (4) -#define ADP8860_LED_D3 (3) -#define ADP8860_LED_D2 (2) -#define ADP8860_LED_D1 (1) - -/* - * Backlight subdevice platform data - */ - -#define ADP8860_BL_D7 (1 << 6) -#define ADP8860_BL_D6 (1 << 5) -#define ADP8860_BL_D5 (1 << 4) -#define ADP8860_BL_D4 (1 << 3) -#define ADP8860_BL_D3 (1 << 2) -#define ADP8860_BL_D2 (1 << 1) -#define ADP8860_BL_D1 (1 << 0) - -#define ADP8860_FADE_T_DIS 0 /* Fade Timer Disabled */ -#define ADP8860_FADE_T_300ms 1 /* 0.3 Sec */ -#define ADP8860_FADE_T_600ms 2 -#define ADP8860_FADE_T_900ms 3 -#define ADP8860_FADE_T_1200ms 4 -#define ADP8860_FADE_T_1500ms 5 -#define ADP8860_FADE_T_1800ms 6 -#define ADP8860_FADE_T_2100ms 7 -#define ADP8860_FADE_T_2400ms 8 -#define ADP8860_FADE_T_2700ms 9 -#define ADP8860_FADE_T_3000ms 10 -#define ADP8860_FADE_T_3500ms 11 -#define ADP8860_FADE_T_4000ms 12 -#define ADP8860_FADE_T_4500ms 13 -#define ADP8860_FADE_T_5000ms 14 -#define ADP8860_FADE_T_5500ms 15 /* 5.5 Sec */ - -#define ADP8860_FADE_LAW_LINEAR 0 -#define ADP8860_FADE_LAW_SQUARE 1 -#define ADP8860_FADE_LAW_CUBIC1 2 -#define ADP8860_FADE_LAW_CUBIC2 3 - -#define ADP8860_BL_AMBL_FILT_80ms 0 /* Light sensor filter time */ -#define ADP8860_BL_AMBL_FILT_160ms 1 -#define ADP8860_BL_AMBL_FILT_320ms 2 -#define ADP8860_BL_AMBL_FILT_640ms 3 -#define ADP8860_BL_AMBL_FILT_1280ms 4 -#define ADP8860_BL_AMBL_FILT_2560ms 5 -#define ADP8860_BL_AMBL_FILT_5120ms 6 -#define ADP8860_BL_AMBL_FILT_10240ms 7 /* 10.24 sec */ - -/* - * Blacklight current 0..30mA - */ -#define ADP8860_BL_CUR_mA(I) ((I * 127) / 30) - -/* - * L2 comparator current 0..1106uA - */ -#define ADP8860_L2_COMP_CURR_uA(I) ((I * 255) / 1106) - -/* - * L3 comparator current 0..138uA - */ -#define ADP8860_L3_COMP_CURR_uA(I) ((I * 255) / 138) - -struct adp8860_backlight_platform_data { - u8 bl_led_assign; /* 1 = Backlight 0 = Individual LED */ - - u8 bl_fade_in; /* Backlight Fade-In Timer */ - u8 bl_fade_out; /* Backlight Fade-Out Timer */ - u8 bl_fade_law; /* fade-on/fade-off transfer characteristic */ - - u8 en_ambl_sens; /* 1 = enable ambient light sensor */ - u8 abml_filt; /* Light sensor filter time */ - - u8 l1_daylight_max; /* use BL_CUR_mA(I) 0 <= I <= 30 mA */ - u8 l1_daylight_dim; /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */ - u8 l2_office_max; /* use BL_CUR_mA(I) 0 <= I <= 30 mA */ - u8 l2_office_dim; /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */ - u8 l3_dark_max; /* use BL_CUR_mA(I) 0 <= I <= 30 mA */ - u8 l3_dark_dim; /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */ - - u8 l2_trip; /* use L2_COMP_CURR_uA(I) 0 <= I <= 1106 uA */ - u8 l2_hyst; /* use L2_COMP_CURR_uA(I) 0 <= I <= 1106 uA */ - u8 l3_trip; /* use L3_COMP_CURR_uA(I) 0 <= I <= 551 uA */ - u8 l3_hyst; /* use L3_COMP_CURR_uA(I) 0 <= I <= 551 uA */ - - /** - * Independent Current Sinks / LEDS - * Sinks not assigned to the Backlight can be exposed to - * user space using the LEDS CLASS interface - */ - - int num_leds; - struct led_info *leds; - u8 led_fade_in; /* LED Fade-In Timer */ - u8 led_fade_out; /* LED Fade-Out Timer */ - u8 led_fade_law; /* fade-on/fade-off transfer characteristic */ - u8 led_on_time; - - /** - * Gain down disable. Setting this option does not allow the - * charge pump to switch to lower gains. NOT AVAILABLE on ADP8860 - * 1 = the charge pump doesn't switch down in gain until all LEDs are 0. - * The charge pump switches up in gain as needed. This feature is - * useful if the ADP8863 charge pump is used to drive an external load. - * This feature must be used when utilizing small fly capacitors - * (0402 or smaller). - * 0 = the charge pump automatically switches up and down in gain. - * This provides optimal efficiency, but is not suitable for driving - * loads that are not connected through the ADP8863 diode drivers. - * Additionally, the charge pump fly capacitors should be low ESR - * and sized 0603 or greater. - */ - - u8 gdwn_dis; -}; - -#endif /* __LINUX_I2C_ADP8860_H */ diff --git a/ANDROID_3.4.5/include/linux/i2c/adp8870.h b/ANDROID_3.4.5/include/linux/i2c/adp8870.h deleted file mode 100644 index 624dcecc..00000000 --- a/ANDROID_3.4.5/include/linux/i2c/adp8870.h +++ /dev/null @@ -1,153 +0,0 @@ -/* - * Definitions and platform data for Analog Devices - * Backlight drivers ADP8870 - * - * Copyright 2009-2010 Analog Devices Inc. - * - * Licensed under the GPL-2 or later. - */ - -#ifndef __LINUX_I2C_ADP8870_H -#define __LINUX_I2C_ADP8870_H - -#define ID_ADP8870 8870 - -#define ADP8870_MAX_BRIGHTNESS 0x7F -#define FLAG_OFFT_SHIFT 8 - -/* - * LEDs subdevice platform data - */ - -#define ADP8870_LED_DIS_BLINK (0 << FLAG_OFFT_SHIFT) -#define ADP8870_LED_OFFT_600ms (1 << FLAG_OFFT_SHIFT) -#define ADP8870_LED_OFFT_1200ms (2 << FLAG_OFFT_SHIFT) -#define ADP8870_LED_OFFT_1800ms (3 << FLAG_OFFT_SHIFT) - -#define ADP8870_LED_ONT_200ms 0 -#define ADP8870_LED_ONT_600ms 1 -#define ADP8870_LED_ONT_800ms 2 -#define ADP8870_LED_ONT_1200ms 3 - -#define ADP8870_LED_D7 (7) -#define ADP8870_LED_D6 (6) -#define ADP8870_LED_D5 (5) -#define ADP8870_LED_D4 (4) -#define ADP8870_LED_D3 (3) -#define ADP8870_LED_D2 (2) -#define ADP8870_LED_D1 (1) - -/* - * Backlight subdevice platform data - */ - -#define ADP8870_BL_D7 (1 << 6) -#define ADP8870_BL_D6 (1 << 5) -#define ADP8870_BL_D5 (1 << 4) -#define ADP8870_BL_D4 (1 << 3) -#define ADP8870_BL_D3 (1 << 2) -#define ADP8870_BL_D2 (1 << 1) -#define ADP8870_BL_D1 (1 << 0) - -#define ADP8870_FADE_T_DIS 0 /* Fade Timer Disabled */ -#define ADP8870_FADE_T_300ms 1 /* 0.3 Sec */ -#define ADP8870_FADE_T_600ms 2 -#define ADP8870_FADE_T_900ms 3 -#define ADP8870_FADE_T_1200ms 4 -#define ADP8870_FADE_T_1500ms 5 -#define ADP8870_FADE_T_1800ms 6 -#define ADP8870_FADE_T_2100ms 7 -#define ADP8870_FADE_T_2400ms 8 -#define ADP8870_FADE_T_2700ms 9 -#define ADP8870_FADE_T_3000ms 10 -#define ADP8870_FADE_T_3500ms 11 -#define ADP8870_FADE_T_4000ms 12 -#define ADP8870_FADE_T_4500ms 13 -#define ADP8870_FADE_T_5000ms 14 -#define ADP8870_FADE_T_5500ms 15 /* 5.5 Sec */ - -#define ADP8870_FADE_LAW_LINEAR 0 -#define ADP8870_FADE_LAW_SQUARE 1 -#define ADP8870_FADE_LAW_CUBIC1 2 -#define ADP8870_FADE_LAW_CUBIC2 3 - -#define ADP8870_BL_AMBL_FILT_80ms 0 /* Light sensor filter time */ -#define ADP8870_BL_AMBL_FILT_160ms 1 -#define ADP8870_BL_AMBL_FILT_320ms 2 -#define ADP8870_BL_AMBL_FILT_640ms 3 -#define ADP8870_BL_AMBL_FILT_1280ms 4 -#define ADP8870_BL_AMBL_FILT_2560ms 5 -#define ADP8870_BL_AMBL_FILT_5120ms 6 -#define ADP8870_BL_AMBL_FILT_10240ms 7 /* 10.24 sec */ - -/* - * Blacklight current 0..30mA - */ -#define ADP8870_BL_CUR_mA(I) ((I * 127) / 30) - -/* - * L2 comparator current 0..1106uA - */ -#define ADP8870_L2_COMP_CURR_uA(I) ((I * 255) / 1106) - -/* - * L3 comparator current 0..551uA - */ -#define ADP8870_L3_COMP_CURR_uA(I) ((I * 255) / 551) - -/* - * L4 comparator current 0..275uA - */ -#define ADP8870_L4_COMP_CURR_uA(I) ((I * 255) / 275) - -/* - * L5 comparator current 0..138uA - */ -#define ADP8870_L5_COMP_CURR_uA(I) ((I * 255) / 138) - -struct adp8870_backlight_platform_data { - u8 bl_led_assign; /* 1 = Backlight 0 = Individual LED */ - u8 pwm_assign; /* 1 = Enables PWM mode */ - - u8 bl_fade_in; /* Backlight Fade-In Timer */ - u8 bl_fade_out; /* Backlight Fade-Out Timer */ - u8 bl_fade_law; /* fade-on/fade-off transfer characteristic */ - - u8 en_ambl_sens; /* 1 = enable ambient light sensor */ - u8 abml_filt; /* Light sensor filter time */ - - u8 l1_daylight_max; /* use BL_CUR_mA(I) 0 <= I <= 30 mA */ - u8 l1_daylight_dim; /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */ - u8 l2_bright_max; /* use BL_CUR_mA(I) 0 <= I <= 30 mA */ - u8 l2_bright_dim; /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */ - u8 l3_office_max; /* use BL_CUR_mA(I) 0 <= I <= 30 mA */ - u8 l3_office_dim; /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */ - u8 l4_indoor_max; /* use BL_CUR_mA(I) 0 <= I <= 30 mA */ - u8 l4_indor_dim; /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */ - u8 l5_dark_max; /* use BL_CUR_mA(I) 0 <= I <= 30 mA */ - u8 l5_dark_dim; /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */ - - u8 l2_trip; /* use L2_COMP_CURR_uA(I) 0 <= I <= 1106 uA */ - u8 l2_hyst; /* use L2_COMP_CURR_uA(I) 0 <= I <= 1106 uA */ - u8 l3_trip; /* use L3_COMP_CURR_uA(I) 0 <= I <= 551 uA */ - u8 l3_hyst; /* use L3_COMP_CURR_uA(I) 0 <= I <= 551 uA */ - u8 l4_trip; /* use L4_COMP_CURR_uA(I) 0 <= I <= 275 uA */ - u8 l4_hyst; /* use L4_COMP_CURR_uA(I) 0 <= I <= 275 uA */ - u8 l5_trip; /* use L5_COMP_CURR_uA(I) 0 <= I <= 138 uA */ - u8 l5_hyst; /* use L6_COMP_CURR_uA(I) 0 <= I <= 138 uA */ - - /** - * Independent Current Sinks / LEDS - * Sinks not assigned to the Backlight can be exposed to - * user space using the LEDS CLASS interface - */ - - int num_leds; - struct led_info *leds; - u8 led_fade_in; /* LED Fade-In Timer */ - u8 led_fade_out; /* LED Fade-Out Timer */ - u8 led_fade_law; /* fade-on/fade-off transfer characteristic */ - u8 led_on_time; -}; - -#endif /* __LINUX_I2C_ADP8870_H */ diff --git a/ANDROID_3.4.5/include/linux/i2c/ads1015.h b/ANDROID_3.4.5/include/linux/i2c/ads1015.h deleted file mode 100644 index d5aa2a04..00000000 --- a/ANDROID_3.4.5/include/linux/i2c/ads1015.h +++ /dev/null @@ -1,36 +0,0 @@ -/* - * Platform Data for ADS1015 12-bit 4-input ADC - * (C) Copyright 2010 - * Dirk Eibach, Guntermann & Drunck GmbH <eibach@gdsys.de> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef LINUX_ADS1015_H -#define LINUX_ADS1015_H - -#define ADS1015_CHANNELS 8 - -struct ads1015_channel_data { - bool enabled; - unsigned int pga; - unsigned int data_rate; -}; - -struct ads1015_platform_data { - struct ads1015_channel_data channel_data[ADS1015_CHANNELS]; -}; - -#endif /* LINUX_ADS1015_H */ diff --git a/ANDROID_3.4.5/include/linux/i2c/apds990x.h b/ANDROID_3.4.5/include/linux/i2c/apds990x.h deleted file mode 100644 index d186fcc5..00000000 --- a/ANDROID_3.4.5/include/linux/i2c/apds990x.h +++ /dev/null @@ -1,79 +0,0 @@ -/* - * This file is part of the APDS990x sensor driver. - * Chip is combined proximity and ambient light sensor. - * - * Copyright (C) 2010 Nokia Corporation and/or its subsidiary(-ies). - * - * Contact: Samu Onkalo <samu.p.onkalo@nokia.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - * - */ - -#ifndef __APDS990X_H__ -#define __APDS990X_H__ - - -#define APDS_IRLED_CURR_12mA 0x3 -#define APDS_IRLED_CURR_25mA 0x2 -#define APDS_IRLED_CURR_50mA 0x1 -#define APDS_IRLED_CURR_100mA 0x0 - -/** - * struct apds990x_chip_factors - defines effect of the cover window - * @ga: Total glass attenuation - * @cf1: clear channel factor 1 for raw to lux conversion - * @irf1: IR channel factor 1 for raw to lux conversion - * @cf2: clear channel factor 2 for raw to lux conversion - * @irf2: IR channel factor 2 for raw to lux conversion - * @df: device factor for conversion formulas - * - * Structure for tuning ALS calculation to match with environment. - * Values depend on the material above the sensor and the sensor - * itself. If the GA is zero, driver will use uncovered sensor default values - * format: decimal value * APDS_PARAM_SCALE except df which is plain integer. - */ -#define APDS_PARAM_SCALE 4096 -struct apds990x_chip_factors { - int ga; - int cf1; - int irf1; - int cf2; - int irf2; - int df; -}; - -/** - * struct apds990x_platform_data - platform data for apsd990x.c driver - * @cf: chip factor data - * @pddrive: IR-led driving current - * @ppcount: number of IR pulses used for proximity estimation - * @setup_resources: interrupt line setup call back function - * @release_resources: interrupt line release call back function - * - * Proximity detection result depends heavily on correct ppcount, pdrive - * and cover window. - * - */ - -struct apds990x_platform_data { - struct apds990x_chip_factors cf; - u8 pdrive; - u8 ppcount; - int (*setup_resources)(void); - int (*release_resources)(void); -}; - -#endif diff --git a/ANDROID_3.4.5/include/linux/i2c/at24.h b/ANDROID_3.4.5/include/linux/i2c/at24.h deleted file mode 100644 index 285025a9..00000000 --- a/ANDROID_3.4.5/include/linux/i2c/at24.h +++ /dev/null @@ -1,55 +0,0 @@ -/* - * at24.h - platform_data for the at24 (generic eeprom) driver - * (C) Copyright 2008 by Pengutronix - * (C) Copyright 2012 by Wolfram Sang - * same license as the driver - */ - -#ifndef _LINUX_AT24_H -#define _LINUX_AT24_H - -#include <linux/types.h> -#include <linux/memory.h> - -/** - * struct at24_platform_data - data to set up at24 (generic eeprom) driver - * @byte_len: size of eeprom in byte - * @page_size: number of byte which can be written in one go - * @flags: tunable options, check AT24_FLAG_* defines - * @setup: an optional callback invoked after eeprom is probed; enables kernel - code to access eeprom via memory_accessor, see example - * @context: optional parameter passed to setup() - * - * If you set up a custom eeprom type, please double-check the parameters. - * Especially page_size needs extra care, as you risk data loss if your value - * is bigger than what the chip actually supports! - * - * An example in pseudo code for a setup() callback: - * - * void get_mac_addr(struct memory_accessor *mem_acc, void *context) - * { - * u8 *mac_addr = ethernet_pdata->mac_addr; - * off_t offset = context; - * - * // Read MAC addr from EEPROM - * if (mem_acc->read(mem_acc, mac_addr, offset, ETH_ALEN) == ETH_ALEN) - * pr_info("Read MAC addr from EEPROM: %pM\n", mac_addr); - * } - * - * This function pointer and context can now be set up in at24_platform_data. - */ - -struct at24_platform_data { - u32 byte_len; /* size (sum of all addr) */ - u16 page_size; /* for writes */ - u8 flags; -#define AT24_FLAG_ADDR16 0x80 /* address pointer is 16 bit */ -#define AT24_FLAG_READONLY 0x40 /* sysfs-entry will be read-only */ -#define AT24_FLAG_IRUGO 0x20 /* sysfs-entry will be world-readable */ -#define AT24_FLAG_TAKE8ADDR 0x10 /* take always 8 addresses (24c00) */ - - void (*setup)(struct memory_accessor *, void *context); - void *context; -}; - -#endif /* _LINUX_AT24_H */ diff --git a/ANDROID_3.4.5/include/linux/i2c/atmel_mxt_ts.h b/ANDROID_3.4.5/include/linux/i2c/atmel_mxt_ts.h deleted file mode 100644 index f027f7a6..00000000 --- a/ANDROID_3.4.5/include/linux/i2c/atmel_mxt_ts.h +++ /dev/null @@ -1,44 +0,0 @@ -/* - * Atmel maXTouch Touchscreen driver - * - * Copyright (C) 2010 Samsung Electronics Co.Ltd - * Author: Joonyoung Shim <jy0922.shim@samsung.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#ifndef __LINUX_ATMEL_MXT_TS_H -#define __LINUX_ATMEL_MXT_TS_H - -#include <linux/types.h> - -/* Orient */ -#define MXT_NORMAL 0x0 -#define MXT_DIAGONAL 0x1 -#define MXT_HORIZONTAL_FLIP 0x2 -#define MXT_ROTATED_90_COUNTER 0x3 -#define MXT_VERTICAL_FLIP 0x4 -#define MXT_ROTATED_90 0x5 -#define MXT_ROTATED_180 0x6 -#define MXT_DIAGONAL_COUNTER 0x7 - -/* The platform data for the Atmel maXTouch touchscreen driver */ -struct mxt_platform_data { - const u8 *config; - size_t config_length; - - unsigned int x_line; - unsigned int y_line; - unsigned int x_size; - unsigned int y_size; - unsigned int blen; - unsigned int threshold; - unsigned int voltage; - unsigned char orient; - unsigned long irqflags; -}; - -#endif /* __LINUX_ATMEL_MXT_TS_H */ diff --git a/ANDROID_3.4.5/include/linux/i2c/bh1770glc.h b/ANDROID_3.4.5/include/linux/i2c/bh1770glc.h deleted file mode 100644 index 8b5e2df3..00000000 --- a/ANDROID_3.4.5/include/linux/i2c/bh1770glc.h +++ /dev/null @@ -1,53 +0,0 @@ -/* - * This file is part of the ROHM BH1770GLC / OSRAM SFH7770 sensor driver. - * Chip is combined proximity and ambient light sensor. - * - * Copyright (C) 2010 Nokia Corporation and/or its subsidiary(-ies). - * - * Contact: Samu Onkalo <samu.p.onkalo@nokia.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - * - */ - -#ifndef __BH1770_H__ -#define __BH1770_H__ - -/** - * struct bh1770_platform_data - platform data for bh1770glc driver - * @led_def_curr: IR led driving current. - * @glass_attenuation: Attenuation factor for covering window. - * @setup_resources: Call back for interrupt line setup function - * @release_resources: Call back for interrupte line release function - * - * Example of glass attenuation: 16384 * 385 / 100 means attenuation factor - * of 3.85. i.e. light_above_sensor = light_above_cover_window / 3.85 - */ - -struct bh1770_platform_data { -#define BH1770_LED_5mA 0 -#define BH1770_LED_10mA 1 -#define BH1770_LED_20mA 2 -#define BH1770_LED_50mA 3 -#define BH1770_LED_100mA 4 -#define BH1770_LED_150mA 5 -#define BH1770_LED_200mA 6 - __u8 led_def_curr; -#define BH1770_NEUTRAL_GA 16384 /* 16384 / 16384 = 1 */ - __u32 glass_attenuation; - int (*setup_resources)(void); - int (*release_resources)(void); -}; -#endif diff --git a/ANDROID_3.4.5/include/linux/i2c/dm355evm_msp.h b/ANDROID_3.4.5/include/linux/i2c/dm355evm_msp.h deleted file mode 100644 index 37247035..00000000 --- a/ANDROID_3.4.5/include/linux/i2c/dm355evm_msp.h +++ /dev/null @@ -1,79 +0,0 @@ -/* - * dm355evm_msp.h - support MSP430 microcontroller on DM355EVM board - */ -#ifndef __LINUX_I2C_DM355EVM_MSP -#define __LINUX_I2C_DM355EVM_MSP - -/* - * Written against Spectrum's writeup for the A4 firmware revision, - * and tweaked to match source and rev D2 schematics by removing CPLD - * and NOR flash hooks (which were last appropriate in rev B boards). - * - * Note that the firmware supports a flavor of write posting ... to be - * sure a write completes, issue another read or write. - */ - -/* utilities to access "registers" emulated by msp430 firmware */ -extern int dm355evm_msp_write(u8 value, u8 reg); -extern int dm355evm_msp_read(u8 reg); - - -/* command/control registers */ -#define DM355EVM_MSP_COMMAND 0x00 -# define MSP_COMMAND_NULL 0 -# define MSP_COMMAND_RESET_COLD 1 -# define MSP_COMMAND_RESET_WARM 2 -# define MSP_COMMAND_RESET_WARM_I 3 -# define MSP_COMMAND_POWEROFF 4 -# define MSP_COMMAND_IR_REINIT 5 -#define DM355EVM_MSP_STATUS 0x01 -# define MSP_STATUS_BAD_OFFSET BIT(0) -# define MSP_STATUS_BAD_COMMAND BIT(1) -# define MSP_STATUS_POWER_ERROR BIT(2) -# define MSP_STATUS_RXBUF_OVERRUN BIT(3) -#define DM355EVM_MSP_RESET 0x02 /* 0 bits == in reset */ -# define MSP_RESET_DC5 BIT(0) -# define MSP_RESET_TVP5154 BIT(2) -# define MSP_RESET_IMAGER BIT(3) -# define MSP_RESET_ETHERNET BIT(4) -# define MSP_RESET_SYS BIT(5) -# define MSP_RESET_AIC33 BIT(7) - -/* GPIO registers ... bit patterns mostly match the source MSP ports */ -#define DM355EVM_MSP_LED 0x03 /* active low (MSP P4) */ -#define DM355EVM_MSP_SWITCH1 0x04 /* (MSP P5, masked) */ -# define MSP_SWITCH1_SW6_1 BIT(0) -# define MSP_SWITCH1_SW6_2 BIT(1) -# define MSP_SWITCH1_SW6_3 BIT(2) -# define MSP_SWITCH1_SW6_4 BIT(3) -# define MSP_SWITCH1_J1 BIT(4) /* NTSC/PAL */ -# define MSP_SWITCH1_MSP_INT BIT(5) /* active low */ -#define DM355EVM_MSP_SWITCH2 0x05 /* (MSP P6, masked) */ -# define MSP_SWITCH2_SW10 BIT(3) -# define MSP_SWITCH2_SW11 BIT(4) -# define MSP_SWITCH2_SW12 BIT(5) -# define MSP_SWITCH2_SW13 BIT(6) -# define MSP_SWITCH2_SW14 BIT(7) -#define DM355EVM_MSP_SDMMC 0x06 /* (MSP P2, masked) */ -# define MSP_SDMMC_0_WP BIT(1) -# define MSP_SDMMC_0_CD BIT(2) /* active low */ -# define MSP_SDMMC_1_WP BIT(3) -# define MSP_SDMMC_1_CD BIT(4) /* active low */ -#define DM355EVM_MSP_FIRMREV 0x07 /* not a GPIO (out of order) */ -#define DM355EVM_MSP_VIDEO_IN 0x08 /* (MSP P3, masked) */ -# define MSP_VIDEO_IMAGER BIT(7) /* low == tvp5146 */ - -/* power supply registers are currently omitted */ - -/* RTC registers */ -#define DM355EVM_MSP_RTC_0 0x12 /* LSB */ -#define DM355EVM_MSP_RTC_1 0x13 -#define DM355EVM_MSP_RTC_2 0x14 -#define DM355EVM_MSP_RTC_3 0x15 /* MSB */ - -/* input event queue registers; code == ((HIGH << 8) | LOW) */ -#define DM355EVM_MSP_INPUT_COUNT 0x16 /* decrement by reading LOW */ -#define DM355EVM_MSP_INPUT_HIGH 0x17 -#define DM355EVM_MSP_INPUT_LOW 0x18 - -#endif /* __LINUX_I2C_DM355EVM_MSP */ diff --git a/ANDROID_3.4.5/include/linux/i2c/ds620.h b/ANDROID_3.4.5/include/linux/i2c/ds620.h deleted file mode 100644 index 736bb87a..00000000 --- a/ANDROID_3.4.5/include/linux/i2c/ds620.h +++ /dev/null @@ -1,21 +0,0 @@ -#ifndef _LINUX_DS620_H -#define _LINUX_DS620_H - -#include <linux/types.h> -#include <linux/i2c.h> - -/* platform data for the DS620 temperature sensor and thermostat */ - -struct ds620_platform_data { - /* - * Thermostat output pin PO mode: - * 0 = always low (default) - * 1 = PO_LOW - * 2 = PO_HIGH - * - * (see Documentation/hwmon/ds620) - */ - int pomode; -}; - -#endif /* _LINUX_DS620_H */ diff --git a/ANDROID_3.4.5/include/linux/i2c/i2c-sh_mobile.h b/ANDROID_3.4.5/include/linux/i2c/i2c-sh_mobile.h deleted file mode 100644 index beda7081..00000000 --- a/ANDROID_3.4.5/include/linux/i2c/i2c-sh_mobile.h +++ /dev/null @@ -1,10 +0,0 @@ -#ifndef __I2C_SH_MOBILE_H__ -#define __I2C_SH_MOBILE_H__ - -#include <linux/platform_device.h> - -struct i2c_sh_mobile_platform_data { - unsigned long bus_speed; -}; - -#endif /* __I2C_SH_MOBILE_H__ */ diff --git a/ANDROID_3.4.5/include/linux/i2c/lm8323.h b/ANDROID_3.4.5/include/linux/i2c/lm8323.h deleted file mode 100644 index 478d668b..00000000 --- a/ANDROID_3.4.5/include/linux/i2c/lm8323.h +++ /dev/null @@ -1,46 +0,0 @@ -/* - * lm8323.h - Configuration for LM8323 keypad driver. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation (version 2 of the License only). - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __LINUX_LM8323_H -#define __LINUX_LM8323_H - -#include <linux/types.h> - -/* - * Largest keycode that the chip can send, plus one, - * so keys can be mapped directly at the index of the - * LM8323 keycode instead of subtracting one. - */ -#define LM8323_KEYMAP_SIZE (0x7f + 1) - -#define LM8323_NUM_PWMS 3 - -struct lm8323_platform_data { - int debounce_time; /* Time to watch for key bouncing, in ms. */ - int active_time; /* Idle time until sleep, in ms. */ - - int size_x; - int size_y; - bool repeat; - const unsigned short *keymap; - - const char *pwm_names[LM8323_NUM_PWMS]; - - const char *name; /* Device name. */ -}; - -#endif /* __LINUX_LM8323_H */ diff --git a/ANDROID_3.4.5/include/linux/i2c/ltc4245.h b/ANDROID_3.4.5/include/linux/i2c/ltc4245.h deleted file mode 100644 index 56bda4be..00000000 --- a/ANDROID_3.4.5/include/linux/i2c/ltc4245.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * Platform Data for LTC4245 hardware monitor chip - * - * Copyright (c) 2010 Ira W. Snyder <iws@ovro.caltech.edu> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#ifndef LINUX_LTC4245_H -#define LINUX_LTC4245_H - -#include <linux/types.h> - -struct ltc4245_platform_data { - bool use_extra_gpios; -}; - -#endif /* LINUX_LTC4245_H */ diff --git a/ANDROID_3.4.5/include/linux/i2c/max6639.h b/ANDROID_3.4.5/include/linux/i2c/max6639.h deleted file mode 100644 index 6011c420..00000000 --- a/ANDROID_3.4.5/include/linux/i2c/max6639.h +++ /dev/null @@ -1,14 +0,0 @@ -#ifndef _LINUX_MAX6639_H -#define _LINUX_MAX6639_H - -#include <linux/types.h> - -/* platform data for the MAX6639 temperature sensor and fan control */ - -struct max6639_platform_data { - bool pwm_polarity; /* Polarity low (0) or high (1, default) */ - int ppr; /* Pulses per rotation 1..4 (default == 2) */ - int rpm_range; /* 2000, 4000 (default), 8000 or 16000 */ -}; - -#endif /* _LINUX_MAX6639_H */ diff --git a/ANDROID_3.4.5/include/linux/i2c/max732x.h b/ANDROID_3.4.5/include/linux/i2c/max732x.h deleted file mode 100644 index c04bac8b..00000000 --- a/ANDROID_3.4.5/include/linux/i2c/max732x.h +++ /dev/null @@ -1,22 +0,0 @@ -#ifndef __LINUX_I2C_MAX732X_H -#define __LINUX_I2C_MAX732X_H - -/* platform data for the MAX732x 8/16-bit I/O expander driver */ - -struct max732x_platform_data { - /* number of the first GPIO */ - unsigned gpio_base; - - /* interrupt base */ - int irq_base; - - void *context; /* param to setup/teardown */ - - int (*setup)(struct i2c_client *client, - unsigned gpio, unsigned ngpio, - void *context); - int (*teardown)(struct i2c_client *client, - unsigned gpio, unsigned ngpio, - void *context); -}; -#endif /* __LINUX_I2C_MAX732X_H */ diff --git a/ANDROID_3.4.5/include/linux/i2c/mcs.h b/ANDROID_3.4.5/include/linux/i2c/mcs.h deleted file mode 100644 index 61bb18a4..00000000 --- a/ANDROID_3.4.5/include/linux/i2c/mcs.h +++ /dev/null @@ -1,35 +0,0 @@ -/* - * Copyright (C) 2009 - 2010 Samsung Electronics Co.Ltd - * Author: Joonyoung Shim <jy0922.shim@samsung.com> - * Author: HeungJun Kim <riverful.kim@samsung.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ - -#ifndef __LINUX_MCS_H -#define __LINUX_MCS_H - -#define MCS_KEY_MAP(v, c) ((((v) & 0xff) << 16) | ((c) & 0xffff)) -#define MCS_KEY_VAL(v) (((v) >> 16) & 0xff) -#define MCS_KEY_CODE(v) ((v) & 0xffff) - -struct mcs_platform_data { - void (*poweron)(bool); - void (*cfg_pin)(void); - - /* touchscreen */ - unsigned int x_size; - unsigned int y_size; - - /* touchkey */ - const u32 *keymap; - unsigned int keymap_size; - unsigned int key_maxval; - bool no_autorepeat; -}; - -#endif /* __LINUX_MCS_H */ diff --git a/ANDROID_3.4.5/include/linux/i2c/mpr121_touchkey.h b/ANDROID_3.4.5/include/linux/i2c/mpr121_touchkey.h deleted file mode 100644 index f0bcc38b..00000000 --- a/ANDROID_3.4.5/include/linux/i2c/mpr121_touchkey.h +++ /dev/null @@ -1,20 +0,0 @@ -/* Header file for Freescale MPR121 Capacitive Touch Sensor */ - -#ifndef _MPR121_TOUCHKEY_H -#define _MPR121_TOUCHKEY_H - -/** - * struct mpr121_platform_data - platform data for mpr121 sensor - * @keymap: pointer to array of KEY_* values representing keymap - * @keymap_size: size of the keymap - * @wakeup: configure the button as a wake-up source - * @vdd_uv: VDD voltage in uV - */ -struct mpr121_platform_data { - const unsigned short *keymap; - unsigned int keymap_size; - bool wakeup; - int vdd_uv; -}; - -#endif /* _MPR121_TOUCHKEY_H */ diff --git a/ANDROID_3.4.5/include/linux/i2c/pca953x.h b/ANDROID_3.4.5/include/linux/i2c/pca953x.h deleted file mode 100644 index 139ba526..00000000 --- a/ANDROID_3.4.5/include/linux/i2c/pca953x.h +++ /dev/null @@ -1,30 +0,0 @@ -#ifndef _LINUX_PCA953X_H -#define _LINUX_PCA953X_H - -#include <linux/types.h> -#include <linux/i2c.h> - -/* platform data for the PCA9539 16-bit I/O expander driver */ - -struct pca953x_platform_data { - /* number of the first GPIO */ - unsigned gpio_base; - - /* initial polarity inversion setting */ - uint16_t invert; - - /* interrupt base */ - int irq_base; - - void *context; /* param to setup/teardown */ - - int (*setup)(struct i2c_client *client, - unsigned gpio, unsigned ngpio, - void *context); - int (*teardown)(struct i2c_client *client, - unsigned gpio, unsigned ngpio, - void *context); - const char *const *names; -}; - -#endif /* _LINUX_PCA953X_H */ diff --git a/ANDROID_3.4.5/include/linux/i2c/pca954x.h b/ANDROID_3.4.5/include/linux/i2c/pca954x.h deleted file mode 100644 index 28f1f8d5..00000000 --- a/ANDROID_3.4.5/include/linux/i2c/pca954x.h +++ /dev/null @@ -1,47 +0,0 @@ -/* - * - * pca954x.h - I2C multiplexer/switch support - * - * Copyright (c) 2008-2009 Rodolfo Giometti <giometti@linux.it> - * Copyright (c) 2008-2009 Eurotech S.p.A. <info@eurotech.it> - * Michael Lawnick <michael.lawnick.ext@nsn.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - - -#ifndef _LINUX_I2C_PCA954X_H -#define _LINUX_I2C_PCA954X_H - -/* Platform data for the PCA954x I2C multiplexers */ - -/* Per channel initialisation data: - * @adap_id: bus number for the adapter. 0 = don't care - * @deselect_on_exit: set this entry to 1, if your H/W needs deselection - * of this channel after transaction. - * - */ -struct pca954x_platform_mode { - int adap_id; - unsigned int deselect_on_exit:1; -}; - -/* Per mux/switch data, used with i2c_register_board_info */ -struct pca954x_platform_data { - struct pca954x_platform_mode *modes; - int num_modes; -}; - -#endif /* _LINUX_I2C_PCA954X_H */ diff --git a/ANDROID_3.4.5/include/linux/i2c/pcf857x.h b/ANDROID_3.4.5/include/linux/i2c/pcf857x.h deleted file mode 100644 index 0767a2a6..00000000 --- a/ANDROID_3.4.5/include/linux/i2c/pcf857x.h +++ /dev/null @@ -1,44 +0,0 @@ -#ifndef __LINUX_PCF857X_H -#define __LINUX_PCF857X_H - -/** - * struct pcf857x_platform_data - data to set up pcf857x driver - * @gpio_base: number of the chip's first GPIO - * @n_latch: optional bit-inverse of initial register value; if - * you leave this initialized to zero the driver will act - * like the chip was just reset - * @setup: optional callback issued once the GPIOs are valid - * @teardown: optional callback issued before the GPIOs are invalidated - * @context: optional parameter passed to setup() and teardown() - * - * In addition to the I2C_BOARD_INFO() state appropriate to each chip, - * the i2c_board_info used with the pcf875x driver must provide its - * platform_data (pointer to one of these structures) with at least - * the gpio_base value initialized. - * - * The @setup callback may be used with the kind of board-specific glue - * which hands the (now-valid) GPIOs to other drivers, or which puts - * devices in their initial states using these GPIOs. - * - * These GPIO chips are only "quasi-bidirectional"; read the chip specs - * to understand the behavior. They don't have separate registers to - * record which pins are used for input or output, record which output - * values are driven, or provide access to input values. That must be - * inferred by reading the chip's value and knowing the last value written - * to it. If you leave n_latch initialized to zero, that last written - * value is presumed to be all ones (as if the chip were just reset). - */ -struct pcf857x_platform_data { - unsigned gpio_base; - unsigned n_latch; - - int (*setup)(struct i2c_client *client, - int gpio, unsigned ngpio, - void *context); - int (*teardown)(struct i2c_client *client, - int gpio, unsigned ngpio, - void *context); - void *context; -}; - -#endif /* __LINUX_PCF857X_H */ diff --git a/ANDROID_3.4.5/include/linux/i2c/pmbus.h b/ANDROID_3.4.5/include/linux/i2c/pmbus.h deleted file mode 100644 index 69280db0..00000000 --- a/ANDROID_3.4.5/include/linux/i2c/pmbus.h +++ /dev/null @@ -1,45 +0,0 @@ -/* - * Hardware monitoring driver for PMBus devices - * - * Copyright (c) 2010, 2011 Ericsson AB. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef _PMBUS_H_ -#define _PMBUS_H_ - -/* flags */ - -/* - * PMBUS_SKIP_STATUS_CHECK - * - * During register detection, skip checking the status register for - * communication or command errors. - * - * Some PMBus chips respond with valid data when trying to read an unsupported - * register. For such chips, checking the status register is mandatory when - * trying to determine if a chip register exists or not. - * Other PMBus chips don't support the STATUS_CML register, or report - * communication errors for no explicable reason. For such chips, checking - * the status register must be disabled. - */ -#define PMBUS_SKIP_STATUS_CHECK (1 << 0) - -struct pmbus_platform_data { - u32 flags; /* Device specific flags */ -}; - -#endif /* _PMBUS_H_ */ diff --git a/ANDROID_3.4.5/include/linux/i2c/pxa-i2c.h b/ANDROID_3.4.5/include/linux/i2c/pxa-i2c.h deleted file mode 100644 index 1a9f65e6..00000000 --- a/ANDROID_3.4.5/include/linux/i2c/pxa-i2c.h +++ /dev/null @@ -1,82 +0,0 @@ -/* - * i2c_pxa.h - * - * Copyright (C) 2002 Intrinsyc Software Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ -#ifndef _I2C_PXA_H_ -#define _I2C_PXA_H_ - -#if 0 -#define DEF_TIMEOUT 3 -#else -/* need a longer timeout if we're dealing with the fact we may well be - * looking at a multi-master environment -*/ -#define DEF_TIMEOUT 32 -#endif - -#define BUS_ERROR (-EREMOTEIO) -#define XFER_NAKED (-ECONNREFUSED) -#define I2C_RETRY (-2000) /* an error has occurred retry transmit */ - -/* ICR initialize bit values -* -* 15. FM 0 (100 Khz operation) -* 14. UR 0 (No unit reset) -* 13. SADIE 0 (Disables the unit from interrupting on slave addresses -* matching its slave address) -* 12. ALDIE 0 (Disables the unit from interrupt when it loses arbitration -* in master mode) -* 11. SSDIE 0 (Disables interrupts from a slave stop detected, in slave mode) -* 10. BEIE 1 (Enable interrupts from detected bus errors, no ACK sent) -* 9. IRFIE 1 (Enable interrupts from full buffer received) -* 8. ITEIE 1 (Enables the I2C unit to interrupt when transmit buffer empty) -* 7. GCD 1 (Disables i2c unit response to general call messages as a slave) -* 6. IUE 0 (Disable unit until we change settings) -* 5. SCLE 1 (Enables the i2c clock output for master mode (drives SCL) -* 4. MA 0 (Only send stop with the ICR stop bit) -* 3. TB 0 (We are not transmitting a byte initially) -* 2. ACKNAK 0 (Send an ACK after the unit receives a byte) -* 1. STOP 0 (Do not send a STOP) -* 0. START 0 (Do not send a START) -* -*/ -#define I2C_ICR_INIT (ICR_BEIE | ICR_IRFIE | ICR_ITEIE | ICR_GCD | ICR_SCLE) - -/* I2C status register init values - * - * 10. BED 1 (Clear bus error detected) - * 9. SAD 1 (Clear slave address detected) - * 7. IRF 1 (Clear IDBR Receive Full) - * 6. ITE 1 (Clear IDBR Transmit Empty) - * 5. ALD 1 (Clear Arbitration Loss Detected) - * 4. SSD 1 (Clear Slave Stop Detected) - */ -#define I2C_ISR_INIT 0x7FF /* status register init */ - -struct i2c_slave_client; - -struct i2c_pxa_platform_data { - unsigned int slave_addr; - struct i2c_slave_client *slave; - unsigned int class; - unsigned int use_pio :1; - unsigned int fast_mode :1; -}; - -extern void pxa_set_i2c_info(struct i2c_pxa_platform_data *info); - -#ifdef CONFIG_PXA27x -extern void pxa27x_set_i2c_power_info(struct i2c_pxa_platform_data *info); -#endif - -#ifdef CONFIG_PXA3xx -extern void pxa3xx_set_i2c_power_info(struct i2c_pxa_platform_data *info); -#endif - -#endif diff --git a/ANDROID_3.4.5/include/linux/i2c/s6000.h b/ANDROID_3.4.5/include/linux/i2c/s6000.h deleted file mode 100644 index d9b34bfd..00000000 --- a/ANDROID_3.4.5/include/linux/i2c/s6000.h +++ /dev/null @@ -1,10 +0,0 @@ -#ifndef __LINUX_I2C_S6000_H -#define __LINUX_I2C_S6000_H - -struct s6_i2c_platform_data { - const char *clock; /* the clock to use */ - int bus_num; /* the bus number to register */ -}; - -#endif - diff --git a/ANDROID_3.4.5/include/linux/i2c/sx150x.h b/ANDROID_3.4.5/include/linux/i2c/sx150x.h deleted file mode 100644 index 52baa79d..00000000 --- a/ANDROID_3.4.5/include/linux/i2c/sx150x.h +++ /dev/null @@ -1,82 +0,0 @@ -/* - * Driver for the Semtech SX150x I2C GPIO Expanders - * - * Copyright (c) 2010, Code Aurora Forum. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 and - * only version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA - * 02110-1301, USA. - */ -#ifndef __LINUX_I2C_SX150X_H -#define __LINUX_I2C_SX150X_H - -/** - * struct sx150x_platform_data - config data for SX150x driver - * @gpio_base: The index number of the first GPIO assigned to this - * GPIO expander. The expander will create a block of - * consecutively numbered gpios beginning at the given base, - * with the size of the block depending on the model of the - * expander chip. - * @oscio_is_gpo: If set to true, the driver will configure OSCIO as a GPO - * instead of as an oscillator, increasing the size of the - * GP(I)O pool created by this expander by one. The - * output-only GPO pin will be added at the end of the block. - * @io_pullup_ena: A bit-mask which enables or disables the pull-up resistor - * for each IO line in the expander. Setting the bit at - * position n will enable the pull-up for the IO at - * the corresponding offset. For chips with fewer than - * 16 IO pins, high-end bits are ignored. - * @io_pulldn_ena: A bit-mask which enables-or disables the pull-down - * resistor for each IO line in the expander. Setting the - * bit at position n will enable the pull-down for the IO at - * the corresponding offset. For chips with fewer than - * 16 IO pins, high-end bits are ignored. - * @io_open_drain_ena: A bit-mask which enables-or disables open-drain - * operation for each IO line in the expander. Setting the - * bit at position n enables open-drain operation for - * the IO at the corresponding offset. Clearing the bit - * enables regular push-pull operation for that IO. - * For chips with fewer than 16 IO pins, high-end bits - * are ignored. - * @io_polarity: A bit-mask which enables polarity inversion for each IO line - * in the expander. Setting the bit at position n inverts - * the polarity of that IO line, while clearing it results - * in normal polarity. For chips with fewer than 16 IO pins, - * high-end bits are ignored. - * @irq_summary: The 'summary IRQ' line to which the GPIO expander's INT line - * is connected, via which it reports interrupt events - * across all GPIO lines. This must be a real, - * pre-existing IRQ line. - * Setting this value < 0 disables the irq_chip functionality - * of the driver. - * @irq_base: The first 'virtual IRQ' line at which our block of GPIO-based - * IRQ lines will appear. Similarly to gpio_base, the expander - * will create a block of irqs beginning at this number. - * This value is ignored if irq_summary is < 0. - * @reset_during_probe: If set to true, the driver will trigger a full - * reset of the chip at the beginning of the probe - * in order to place it in a known state. - */ -struct sx150x_platform_data { - unsigned gpio_base; - bool oscio_is_gpo; - u16 io_pullup_ena; - u16 io_pulldn_ena; - u16 io_open_drain_ena; - u16 io_polarity; - int irq_summary; - unsigned irq_base; - bool reset_during_probe; -}; - -#endif /* __LINUX_I2C_SX150X_H */ diff --git a/ANDROID_3.4.5/include/linux/i2c/tc35876x.h b/ANDROID_3.4.5/include/linux/i2c/tc35876x.h deleted file mode 100644 index cd6a51c7..00000000 --- a/ANDROID_3.4.5/include/linux/i2c/tc35876x.h +++ /dev/null @@ -1,11 +0,0 @@ - -#ifndef _TC35876X_H -#define _TC35876X_H - -struct tc35876x_platform_data { - int gpio_bridge_reset; - int gpio_panel_bl_en; - int gpio_panel_vadd; -}; - -#endif /* _TC35876X_H */ diff --git a/ANDROID_3.4.5/include/linux/i2c/tps65010.h b/ANDROID_3.4.5/include/linux/i2c/tps65010.h deleted file mode 100644 index 08aa9227..00000000 --- a/ANDROID_3.4.5/include/linux/i2c/tps65010.h +++ /dev/null @@ -1,205 +0,0 @@ -/* linux/i2c/tps65010.h - * - * Functions to access TPS65010 power management device. - * - * Copyright (C) 2004 Dirk Behme <dirk.behme@de.bosch.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __LINUX_I2C_TPS65010_H -#define __LINUX_I2C_TPS65010_H - -/* - * ---------------------------------------------------------------------------- - * Registers, all 8 bits - * ---------------------------------------------------------------------------- - */ - -#define TPS_CHGSTATUS 0x01 -# define TPS_CHG_USB (1 << 7) -# define TPS_CHG_AC (1 << 6) -# define TPS_CHG_THERM (1 << 5) -# define TPS_CHG_TERM (1 << 4) -# define TPS_CHG_TAPER_TMO (1 << 3) -# define TPS_CHG_CHG_TMO (1 << 2) -# define TPS_CHG_PRECHG_TMO (1 << 1) -# define TPS_CHG_TEMP_ERR (1 << 0) -#define TPS_REGSTATUS 0x02 -# define TPS_REG_ONOFF (1 << 7) -# define TPS_REG_COVER (1 << 6) -# define TPS_REG_UVLO (1 << 5) -# define TPS_REG_NO_CHG (1 << 4) /* tps65013 */ -# define TPS_REG_PG_LD02 (1 << 3) -# define TPS_REG_PG_LD01 (1 << 2) -# define TPS_REG_PG_MAIN (1 << 1) -# define TPS_REG_PG_CORE (1 << 0) -#define TPS_MASK1 0x03 -#define TPS_MASK2 0x04 -#define TPS_ACKINT1 0x05 -#define TPS_ACKINT2 0x06 -#define TPS_CHGCONFIG 0x07 -# define TPS_CHARGE_POR (1 << 7) /* 65010/65012 */ -# define TPS65013_AUA (1 << 7) /* 65011/65013 */ -# define TPS_CHARGE_RESET (1 << 6) -# define TPS_CHARGE_FAST (1 << 5) -# define TPS_CHARGE_CURRENT (3 << 3) -# define TPS_VBUS_500MA (1 << 2) -# define TPS_VBUS_CHARGING (1 << 1) -# define TPS_CHARGE_ENABLE (1 << 0) -#define TPS_LED1_ON 0x08 -#define TPS_LED1_PER 0x09 -#define TPS_LED2_ON 0x0a -#define TPS_LED2_PER 0x0b -#define TPS_VDCDC1 0x0c -# define TPS_ENABLE_LP (1 << 3) -#define TPS_VDCDC2 0x0d -# define TPS_LP_COREOFF (1 << 7) -# define TPS_VCORE_1_8V (7<<4) -# define TPS_VCORE_1_5V (6 << 4) -# define TPS_VCORE_1_4V (5 << 4) -# define TPS_VCORE_1_3V (4 << 4) -# define TPS_VCORE_1_2V (3 << 4) -# define TPS_VCORE_1_1V (2 << 4) -# define TPS_VCORE_1_0V (1 << 4) -# define TPS_VCORE_0_85V (0 << 4) -# define TPS_VCORE_LP_1_2V (3 << 2) -# define TPS_VCORE_LP_1_1V (2 << 2) -# define TPS_VCORE_LP_1_0V (1 << 2) -# define TPS_VCORE_LP_0_85V (0 << 2) -# define TPS_VIB (1 << 1) -# define TPS_VCORE_DISCH (1 << 0) -#define TPS_VREGS1 0x0e -# define TPS_LDO2_ENABLE (1 << 7) -# define TPS_LDO2_OFF (1 << 6) -# define TPS_VLDO2_3_0V (3 << 4) -# define TPS_VLDO2_2_75V (2 << 4) -# define TPS_VLDO2_2_5V (1 << 4) -# define TPS_VLDO2_1_8V (0 << 4) -# define TPS_LDO1_ENABLE (1 << 3) -# define TPS_LDO1_OFF (1 << 2) -# define TPS_VLDO1_3_0V (3 << 0) -# define TPS_VLDO1_2_75V (2 << 0) -# define TPS_VLDO1_2_5V (1 << 0) -# define TPS_VLDO1_ADJ (0 << 0) -#define TPS_MASK3 0x0f -#define TPS_DEFGPIO 0x10 - -/* - * ---------------------------------------------------------------------------- - * Macros used by exported functions - * ---------------------------------------------------------------------------- - */ - -#define LED1 1 -#define LED2 2 -#define OFF 0 -#define ON 1 -#define BLINK 2 -#define GPIO1 1 -#define GPIO2 2 -#define GPIO3 3 -#define GPIO4 4 -#define LOW 0 -#define HIGH 1 - -/* - * ---------------------------------------------------------------------------- - * Exported functions - * ---------------------------------------------------------------------------- - */ - -/* Draw from VBUS: - * 0 mA -- DON'T DRAW (might supply power instead) - * 100 mA -- usb unit load (slowest charge rate) - * 500 mA -- usb high power (fast battery charge) - */ -extern int tps65010_set_vbus_draw(unsigned mA); - -/* tps65010_set_gpio_out_value parameter: - * gpio: GPIO1, GPIO2, GPIO3 or GPIO4 - * value: LOW or HIGH - */ -extern int tps65010_set_gpio_out_value(unsigned gpio, unsigned value); - -/* tps65010_set_led parameter: - * led: LED1 or LED2 - * mode: ON, OFF or BLINK - */ -extern int tps65010_set_led(unsigned led, unsigned mode); - -/* tps65010_set_vib parameter: - * value: ON or OFF - */ -extern int tps65010_set_vib(unsigned value); - -/* tps65010_set_low_pwr parameter: - * mode: ON or OFF - */ -extern int tps65010_set_low_pwr(unsigned mode); - -/* tps65010_config_vregs1 parameter: - * value to be written to VREGS1 register - * Note: The complete register is written, set all bits you need - */ -extern int tps65010_config_vregs1(unsigned value); - -/* tps65013_set_low_pwr parameter: - * mode: ON or OFF - */ -extern int tps65013_set_low_pwr(unsigned mode); - -/* tps65010_set_vdcdc2 - * value to be written to VDCDC2 - */ -extern int tps65010_config_vdcdc2(unsigned value); - -struct i2c_client; - -/** - * struct tps65010_board - packages GPIO and LED lines - * @base: the GPIO number to assign to GPIO-1 - * @outmask: bit (N-1) is set to allow GPIO-N to be used as an - * (open drain) output - * @setup: optional callback issued once the GPIOs are valid - * @teardown: optional callback issued before the GPIOs are invalidated - * @context: optional parameter passed to setup() and teardown() - * - * Board data may be used to package the GPIO (and LED) lines for use - * in by the generic GPIO and LED frameworks. The first four GPIOs - * starting at gpio_base are GPIO1..GPIO4. The next two are LED1/nPG - * and LED2 (with hardware blinking capability, not currently exposed). - * - * The @setup callback may be used with the kind of board-specific glue - * which hands the (now-valid) GPIOs to other drivers, or which puts - * devices in their initial states using these GPIOs. - */ -struct tps65010_board { - int base; - unsigned outmask; - - int (*setup)(struct i2c_client *client, void *context); - int (*teardown)(struct i2c_client *client, void *context); - void *context; -}; - -#endif /* __LINUX_I2C_TPS65010_H */ - diff --git a/ANDROID_3.4.5/include/linux/i2c/tsc2007.h b/ANDROID_3.4.5/include/linux/i2c/tsc2007.h deleted file mode 100644 index 506a9f7a..00000000 --- a/ANDROID_3.4.5/include/linux/i2c/tsc2007.h +++ /dev/null @@ -1,24 +0,0 @@ -#ifndef __LINUX_I2C_TSC2007_H -#define __LINUX_I2C_TSC2007_H - -/* linux/i2c/tsc2007.h */ - -struct tsc2007_platform_data { - u16 model; /* 2007. */ - u16 x_plate_ohms; /* must be non-zero value */ - u16 max_rt; /* max. resistance above which samples are ignored */ - unsigned long poll_delay; /* delay (in ms) after pen-down event - before polling starts */ - unsigned long poll_period; /* time (in ms) between samples */ - int fuzzx; /* fuzz factor for X, Y and pressure axes */ - int fuzzy; - int fuzzz; - - int (*get_pendown_state)(void); - void (*clear_penirq)(void); /* If needed, clear 2nd level - interrupt source */ - int (*init_platform_hw)(void); - void (*exit_platform_hw)(void); -}; - -#endif diff --git a/ANDROID_3.4.5/include/linux/i2c/twl.h b/ANDROID_3.4.5/include/linux/i2c/twl.h deleted file mode 100644 index 1f90de0c..00000000 --- a/ANDROID_3.4.5/include/linux/i2c/twl.h +++ /dev/null @@ -1,846 +0,0 @@ -/* - * twl4030.h - header for TWL4030 PM and audio CODEC device - * - * Copyright (C) 2005-2006 Texas Instruments, Inc. - * - * Based on tlv320aic23.c: - * Copyright (c) by Kai Svahn <kai.svahn@nokia.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ - -#ifndef __TWL_H_ -#define __TWL_H_ - -#include <linux/types.h> -#include <linux/input/matrix_keypad.h> - -/* - * Using the twl4030 core we address registers using a pair - * { module id, relative register offset } - * which that core then maps to the relevant - * { i2c slave, absolute register address } - * - * The module IDs are meaningful only to the twl4030 core code, - * which uses them as array indices to look up the first register - * address each module uses within a given i2c slave. - */ - -/* Slave 0 (i2c address 0x48) */ -#define TWL4030_MODULE_USB 0x00 - -/* Slave 1 (i2c address 0x49) */ -#define TWL4030_MODULE_AUDIO_VOICE 0x01 -#define TWL4030_MODULE_GPIO 0x02 -#define TWL4030_MODULE_INTBR 0x03 -#define TWL4030_MODULE_PIH 0x04 -#define TWL4030_MODULE_TEST 0x05 - -/* Slave 2 (i2c address 0x4a) */ -#define TWL4030_MODULE_KEYPAD 0x06 -#define TWL4030_MODULE_MADC 0x07 -#define TWL4030_MODULE_INTERRUPTS 0x08 -#define TWL4030_MODULE_LED 0x09 -#define TWL4030_MODULE_MAIN_CHARGE 0x0A -#define TWL4030_MODULE_PRECHARGE 0x0B -#define TWL4030_MODULE_PWM0 0x0C -#define TWL4030_MODULE_PWM1 0x0D -#define TWL4030_MODULE_PWMA 0x0E -#define TWL4030_MODULE_PWMB 0x0F - -#define TWL5031_MODULE_ACCESSORY 0x10 -#define TWL5031_MODULE_INTERRUPTS 0x11 - -/* Slave 3 (i2c address 0x4b) */ -#define TWL4030_MODULE_BACKUP 0x12 -#define TWL4030_MODULE_INT 0x13 -#define TWL4030_MODULE_PM_MASTER 0x14 -#define TWL4030_MODULE_PM_RECEIVER 0x15 -#define TWL4030_MODULE_RTC 0x16 -#define TWL4030_MODULE_SECURED_REG 0x17 - -#define TWL_MODULE_USB TWL4030_MODULE_USB -#define TWL_MODULE_AUDIO_VOICE TWL4030_MODULE_AUDIO_VOICE -#define TWL_MODULE_PIH TWL4030_MODULE_PIH -#define TWL_MODULE_MADC TWL4030_MODULE_MADC -#define TWL_MODULE_MAIN_CHARGE TWL4030_MODULE_MAIN_CHARGE -#define TWL_MODULE_PM_MASTER TWL4030_MODULE_PM_MASTER -#define TWL_MODULE_PM_RECEIVER TWL4030_MODULE_PM_RECEIVER -#define TWL_MODULE_RTC TWL4030_MODULE_RTC -#define TWL_MODULE_PWM TWL4030_MODULE_PWM0 - -#define TWL6030_MODULE_ID0 0x0D -#define TWL6030_MODULE_ID1 0x0E -#define TWL6030_MODULE_ID2 0x0F - -#define GPIO_INTR_OFFSET 0 -#define KEYPAD_INTR_OFFSET 1 -#define BCI_INTR_OFFSET 2 -#define MADC_INTR_OFFSET 3 -#define USB_INTR_OFFSET 4 -#define CHARGERFAULT_INTR_OFFSET 5 -#define BCI_PRES_INTR_OFFSET 9 -#define USB_PRES_INTR_OFFSET 10 -#define RTC_INTR_OFFSET 11 - -/* - * Offset from TWL6030_IRQ_BASE / pdata->irq_base - */ -#define PWR_INTR_OFFSET 0 -#define HOTDIE_INTR_OFFSET 12 -#define SMPSLDO_INTR_OFFSET 13 -#define BATDETECT_INTR_OFFSET 14 -#define SIMDETECT_INTR_OFFSET 15 -#define MMCDETECT_INTR_OFFSET 16 -#define GASGAUGE_INTR_OFFSET 17 -#define USBOTG_INTR_OFFSET 4 -#define CHARGER_INTR_OFFSET 2 -#define RSV_INTR_OFFSET 0 - -/* INT register offsets */ -#define REG_INT_STS_A 0x00 -#define REG_INT_STS_B 0x01 -#define REG_INT_STS_C 0x02 - -#define REG_INT_MSK_LINE_A 0x03 -#define REG_INT_MSK_LINE_B 0x04 -#define REG_INT_MSK_LINE_C 0x05 - -#define REG_INT_MSK_STS_A 0x06 -#define REG_INT_MSK_STS_B 0x07 -#define REG_INT_MSK_STS_C 0x08 - -/* MASK INT REG GROUP A */ -#define TWL6030_PWR_INT_MASK 0x07 -#define TWL6030_RTC_INT_MASK 0x18 -#define TWL6030_HOTDIE_INT_MASK 0x20 -#define TWL6030_SMPSLDOA_INT_MASK 0xC0 - -/* MASK INT REG GROUP B */ -#define TWL6030_SMPSLDOB_INT_MASK 0x01 -#define TWL6030_BATDETECT_INT_MASK 0x02 -#define TWL6030_SIMDETECT_INT_MASK 0x04 -#define TWL6030_MMCDETECT_INT_MASK 0x08 -#define TWL6030_GPADC_INT_MASK 0x60 -#define TWL6030_GASGAUGE_INT_MASK 0x80 - -/* MASK INT REG GROUP C */ -#define TWL6030_USBOTG_INT_MASK 0x0F -#define TWL6030_CHARGER_CTRL_INT_MASK 0x10 -#define TWL6030_CHARGER_FAULT_INT_MASK 0x60 - -#define TWL6030_MMCCTRL 0xEE -#define VMMC_AUTO_OFF (0x1 << 3) -#define SW_FC (0x1 << 2) -#define STS_MMC 0x1 - -#define TWL6030_CFG_INPUT_PUPD3 0xF2 -#define MMC_PU (0x1 << 3) -#define MMC_PD (0x1 << 2) - -#define TWL_SIL_TYPE(rev) ((rev) & 0x00FFFFFF) -#define TWL_SIL_REV(rev) ((rev) >> 24) -#define TWL_SIL_5030 0x09002F -#define TWL5030_REV_1_0 0x00 -#define TWL5030_REV_1_1 0x10 -#define TWL5030_REV_1_2 0x30 - -#define TWL4030_CLASS_ID 0x4030 -#define TWL6030_CLASS_ID 0x6030 -unsigned int twl_rev(void); -#define GET_TWL_REV (twl_rev()) -#define TWL_CLASS_IS(class, id) \ -static inline int twl_class_is_ ##class(void) \ -{ \ - return ((id) == (GET_TWL_REV)) ? 1 : 0; \ -} - -TWL_CLASS_IS(4030, TWL4030_CLASS_ID) -TWL_CLASS_IS(6030, TWL6030_CLASS_ID) - -#define TWL6025_SUBCLASS BIT(4) /* TWL6025 has changed registers */ - -/* - * Read and write single 8-bit registers - */ -int twl_i2c_write_u8(u8 mod_no, u8 val, u8 reg); -int twl_i2c_read_u8(u8 mod_no, u8 *val, u8 reg); - -/* - * Read and write several 8-bit registers at once. - * - * IMPORTANT: For twl_i2c_write(), allocate num_bytes + 1 - * for the value, and populate your data starting at offset 1. - */ -int twl_i2c_write(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes); -int twl_i2c_read(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes); - -int twl_get_type(void); -int twl_get_version(void); - -int twl6030_interrupt_unmask(u8 bit_mask, u8 offset); -int twl6030_interrupt_mask(u8 bit_mask, u8 offset); - -/* Card detect Configuration for MMC1 Controller on OMAP4 */ -#ifdef CONFIG_TWL4030_CORE -int twl6030_mmc_card_detect_config(void); -#else -static inline int twl6030_mmc_card_detect_config(void) -{ - pr_debug("twl6030_mmc_card_detect_config not supported\n"); - return 0; -} -#endif - -/* MMC1 Controller on OMAP4 uses Phoenix irq for Card detect */ -#ifdef CONFIG_TWL4030_CORE -int twl6030_mmc_card_detect(struct device *dev, int slot); -#else -static inline int twl6030_mmc_card_detect(struct device *dev, int slot) -{ - pr_debug("Call back twl6030_mmc_card_detect not supported\n"); - return -EIO; -} -#endif -/*----------------------------------------------------------------------*/ - -/* - * NOTE: at up to 1024 registers, this is a big chip. - * - * Avoid putting register declarations in this file, instead of into - * a driver-private file, unless some of the registers in a block - * need to be shared with other drivers. One example is blocks that - * have Secondary IRQ Handler (SIH) registers. - */ - -#define TWL4030_SIH_CTRL_EXCLEN_MASK BIT(0) -#define TWL4030_SIH_CTRL_PENDDIS_MASK BIT(1) -#define TWL4030_SIH_CTRL_COR_MASK BIT(2) - -/*----------------------------------------------------------------------*/ - -/* - * GPIO Block Register offsets (use TWL4030_MODULE_GPIO) - */ - -#define REG_GPIODATAIN1 0x0 -#define REG_GPIODATAIN2 0x1 -#define REG_GPIODATAIN3 0x2 -#define REG_GPIODATADIR1 0x3 -#define REG_GPIODATADIR2 0x4 -#define REG_GPIODATADIR3 0x5 -#define REG_GPIODATAOUT1 0x6 -#define REG_GPIODATAOUT2 0x7 -#define REG_GPIODATAOUT3 0x8 -#define REG_CLEARGPIODATAOUT1 0x9 -#define REG_CLEARGPIODATAOUT2 0xA -#define REG_CLEARGPIODATAOUT3 0xB -#define REG_SETGPIODATAOUT1 0xC -#define REG_SETGPIODATAOUT2 0xD -#define REG_SETGPIODATAOUT3 0xE -#define REG_GPIO_DEBEN1 0xF -#define REG_GPIO_DEBEN2 0x10 -#define REG_GPIO_DEBEN3 0x11 -#define REG_GPIO_CTRL 0x12 -#define REG_GPIOPUPDCTR1 0x13 -#define REG_GPIOPUPDCTR2 0x14 -#define REG_GPIOPUPDCTR3 0x15 -#define REG_GPIOPUPDCTR4 0x16 -#define REG_GPIOPUPDCTR5 0x17 -#define REG_GPIO_ISR1A 0x19 -#define REG_GPIO_ISR2A 0x1A -#define REG_GPIO_ISR3A 0x1B -#define REG_GPIO_IMR1A 0x1C -#define REG_GPIO_IMR2A 0x1D -#define REG_GPIO_IMR3A 0x1E -#define REG_GPIO_ISR1B 0x1F -#define REG_GPIO_ISR2B 0x20 -#define REG_GPIO_ISR3B 0x21 -#define REG_GPIO_IMR1B 0x22 -#define REG_GPIO_IMR2B 0x23 -#define REG_GPIO_IMR3B 0x24 -#define REG_GPIO_EDR1 0x28 -#define REG_GPIO_EDR2 0x29 -#define REG_GPIO_EDR3 0x2A -#define REG_GPIO_EDR4 0x2B -#define REG_GPIO_EDR5 0x2C -#define REG_GPIO_SIH_CTRL 0x2D - -/* Up to 18 signals are available as GPIOs, when their - * pins are not assigned to another use (such as ULPI/USB). - */ -#define TWL4030_GPIO_MAX 18 - -/*----------------------------------------------------------------------*/ - -/*Interface Bit Register (INTBR) offsets - *(Use TWL_4030_MODULE_INTBR) - */ - -#define REG_IDCODE_7_0 0x00 -#define REG_IDCODE_15_8 0x01 -#define REG_IDCODE_16_23 0x02 -#define REG_IDCODE_31_24 0x03 -#define REG_GPPUPDCTR1 0x0F -#define REG_UNLOCK_TEST_REG 0x12 - -/*I2C1 and I2C4(SR) SDA/SCL pull-up control bits */ - -#define I2C_SCL_CTRL_PU BIT(0) -#define I2C_SDA_CTRL_PU BIT(2) -#define SR_I2C_SCL_CTRL_PU BIT(4) -#define SR_I2C_SDA_CTRL_PU BIT(6) - -#define TWL_EEPROM_R_UNLOCK 0x49 - -/*----------------------------------------------------------------------*/ - -/* - * Keypad register offsets (use TWL4030_MODULE_KEYPAD) - * ... SIH/interrupt only - */ - -#define TWL4030_KEYPAD_KEYP_ISR1 0x11 -#define TWL4030_KEYPAD_KEYP_IMR1 0x12 -#define TWL4030_KEYPAD_KEYP_ISR2 0x13 -#define TWL4030_KEYPAD_KEYP_IMR2 0x14 -#define TWL4030_KEYPAD_KEYP_SIR 0x15 /* test register */ -#define TWL4030_KEYPAD_KEYP_EDR 0x16 -#define TWL4030_KEYPAD_KEYP_SIH_CTRL 0x17 - -/*----------------------------------------------------------------------*/ - -/* - * Multichannel ADC register offsets (use TWL4030_MODULE_MADC) - * ... SIH/interrupt only - */ - -#define TWL4030_MADC_ISR1 0x61 -#define TWL4030_MADC_IMR1 0x62 -#define TWL4030_MADC_ISR2 0x63 -#define TWL4030_MADC_IMR2 0x64 -#define TWL4030_MADC_SIR 0x65 /* test register */ -#define TWL4030_MADC_EDR 0x66 -#define TWL4030_MADC_SIH_CTRL 0x67 - -/*----------------------------------------------------------------------*/ - -/* - * Battery charger register offsets (use TWL4030_MODULE_INTERRUPTS) - */ - -#define TWL4030_INTERRUPTS_BCIISR1A 0x0 -#define TWL4030_INTERRUPTS_BCIISR2A 0x1 -#define TWL4030_INTERRUPTS_BCIIMR1A 0x2 -#define TWL4030_INTERRUPTS_BCIIMR2A 0x3 -#define TWL4030_INTERRUPTS_BCIISR1B 0x4 -#define TWL4030_INTERRUPTS_BCIISR2B 0x5 -#define TWL4030_INTERRUPTS_BCIIMR1B 0x6 -#define TWL4030_INTERRUPTS_BCIIMR2B 0x7 -#define TWL4030_INTERRUPTS_BCISIR1 0x8 /* test register */ -#define TWL4030_INTERRUPTS_BCISIR2 0x9 /* test register */ -#define TWL4030_INTERRUPTS_BCIEDR1 0xa -#define TWL4030_INTERRUPTS_BCIEDR2 0xb -#define TWL4030_INTERRUPTS_BCIEDR3 0xc -#define TWL4030_INTERRUPTS_BCISIHCTRL 0xd - -/*----------------------------------------------------------------------*/ - -/* - * Power Interrupt block register offsets (use TWL4030_MODULE_INT) - */ - -#define TWL4030_INT_PWR_ISR1 0x0 -#define TWL4030_INT_PWR_IMR1 0x1 -#define TWL4030_INT_PWR_ISR2 0x2 -#define TWL4030_INT_PWR_IMR2 0x3 -#define TWL4030_INT_PWR_SIR 0x4 /* test register */ -#define TWL4030_INT_PWR_EDR1 0x5 -#define TWL4030_INT_PWR_EDR2 0x6 -#define TWL4030_INT_PWR_SIH_CTRL 0x7 - -/*----------------------------------------------------------------------*/ - -/* - * Accessory Interrupts - */ -#define TWL5031_ACIIMR_LSB 0x05 -#define TWL5031_ACIIMR_MSB 0x06 -#define TWL5031_ACIIDR_LSB 0x07 -#define TWL5031_ACIIDR_MSB 0x08 -#define TWL5031_ACCISR1 0x0F -#define TWL5031_ACCIMR1 0x10 -#define TWL5031_ACCISR2 0x11 -#define TWL5031_ACCIMR2 0x12 -#define TWL5031_ACCSIR 0x13 -#define TWL5031_ACCEDR1 0x14 -#define TWL5031_ACCSIHCTRL 0x15 - -/*----------------------------------------------------------------------*/ - -/* - * Battery Charger Controller - */ - -#define TWL5031_INTERRUPTS_BCIISR1 0x0 -#define TWL5031_INTERRUPTS_BCIIMR1 0x1 -#define TWL5031_INTERRUPTS_BCIISR2 0x2 -#define TWL5031_INTERRUPTS_BCIIMR2 0x3 -#define TWL5031_INTERRUPTS_BCISIR 0x4 -#define TWL5031_INTERRUPTS_BCIEDR1 0x5 -#define TWL5031_INTERRUPTS_BCIEDR2 0x6 -#define TWL5031_INTERRUPTS_BCISIHCTRL 0x7 - -/*----------------------------------------------------------------------*/ - -/* - * PM Master module register offsets (use TWL4030_MODULE_PM_MASTER) - */ - -#define TWL4030_PM_MASTER_CFG_P1_TRANSITION 0x00 -#define TWL4030_PM_MASTER_CFG_P2_TRANSITION 0x01 -#define TWL4030_PM_MASTER_CFG_P3_TRANSITION 0x02 -#define TWL4030_PM_MASTER_CFG_P123_TRANSITION 0x03 -#define TWL4030_PM_MASTER_STS_BOOT 0x04 -#define TWL4030_PM_MASTER_CFG_BOOT 0x05 -#define TWL4030_PM_MASTER_SHUNDAN 0x06 -#define TWL4030_PM_MASTER_BOOT_BCI 0x07 -#define TWL4030_PM_MASTER_CFG_PWRANA1 0x08 -#define TWL4030_PM_MASTER_CFG_PWRANA2 0x09 -#define TWL4030_PM_MASTER_BACKUP_MISC_STS 0x0b -#define TWL4030_PM_MASTER_BACKUP_MISC_CFG 0x0c -#define TWL4030_PM_MASTER_BACKUP_MISC_TST 0x0d -#define TWL4030_PM_MASTER_PROTECT_KEY 0x0e -#define TWL4030_PM_MASTER_STS_HW_CONDITIONS 0x0f -#define TWL4030_PM_MASTER_P1_SW_EVENTS 0x10 -#define TWL4030_PM_MASTER_P2_SW_EVENTS 0x11 -#define TWL4030_PM_MASTER_P3_SW_EVENTS 0x12 -#define TWL4030_PM_MASTER_STS_P123_STATE 0x13 -#define TWL4030_PM_MASTER_PB_CFG 0x14 -#define TWL4030_PM_MASTER_PB_WORD_MSB 0x15 -#define TWL4030_PM_MASTER_PB_WORD_LSB 0x16 -#define TWL4030_PM_MASTER_SEQ_ADD_W2P 0x1c -#define TWL4030_PM_MASTER_SEQ_ADD_P2A 0x1d -#define TWL4030_PM_MASTER_SEQ_ADD_A2W 0x1e -#define TWL4030_PM_MASTER_SEQ_ADD_A2S 0x1f -#define TWL4030_PM_MASTER_SEQ_ADD_S2A12 0x20 -#define TWL4030_PM_MASTER_SEQ_ADD_S2A3 0x21 -#define TWL4030_PM_MASTER_SEQ_ADD_WARM 0x22 -#define TWL4030_PM_MASTER_MEMORY_ADDRESS 0x23 -#define TWL4030_PM_MASTER_MEMORY_DATA 0x24 - -#define TWL4030_PM_MASTER_KEY_CFG1 0xc0 -#define TWL4030_PM_MASTER_KEY_CFG2 0x0c - -#define TWL4030_PM_MASTER_KEY_TST1 0xe0 -#define TWL4030_PM_MASTER_KEY_TST2 0x0e - -#define TWL4030_PM_MASTER_GLOBAL_TST 0xb6 - -/*----------------------------------------------------------------------*/ - -/* Power bus message definitions */ - -/* The TWL4030/5030 splits its power-management resources (the various - * regulators, clock and reset lines) into 3 processor groups - P1, P2 and - * P3. These groups can then be configured to transition between sleep, wait-on - * and active states by sending messages to the power bus. See Section 5.4.2 - * Power Resources of TWL4030 TRM - */ - -/* Processor groups */ -#define DEV_GRP_NULL 0x0 -#define DEV_GRP_P1 0x1 /* P1: all OMAP devices */ -#define DEV_GRP_P2 0x2 /* P2: all Modem devices */ -#define DEV_GRP_P3 0x4 /* P3: all peripheral devices */ - -/* Resource groups */ -#define RES_GRP_RES 0x0 /* Reserved */ -#define RES_GRP_PP 0x1 /* Power providers */ -#define RES_GRP_RC 0x2 /* Reset and control */ -#define RES_GRP_PP_RC 0x3 -#define RES_GRP_PR 0x4 /* Power references */ -#define RES_GRP_PP_PR 0x5 -#define RES_GRP_RC_PR 0x6 -#define RES_GRP_ALL 0x7 /* All resource groups */ - -#define RES_TYPE2_R0 0x0 - -#define RES_TYPE_ALL 0x7 - -/* Resource states */ -#define RES_STATE_WRST 0xF -#define RES_STATE_ACTIVE 0xE -#define RES_STATE_SLEEP 0x8 -#define RES_STATE_OFF 0x0 - -/* Power resources */ - -/* Power providers */ -#define RES_VAUX1 1 -#define RES_VAUX2 2 -#define RES_VAUX3 3 -#define RES_VAUX4 4 -#define RES_VMMC1 5 -#define RES_VMMC2 6 -#define RES_VPLL1 7 -#define RES_VPLL2 8 -#define RES_VSIM 9 -#define RES_VDAC 10 -#define RES_VINTANA1 11 -#define RES_VINTANA2 12 -#define RES_VINTDIG 13 -#define RES_VIO 14 -#define RES_VDD1 15 -#define RES_VDD2 16 -#define RES_VUSB_1V5 17 -#define RES_VUSB_1V8 18 -#define RES_VUSB_3V1 19 -#define RES_VUSBCP 20 -#define RES_REGEN 21 -/* Reset and control */ -#define RES_NRES_PWRON 22 -#define RES_CLKEN 23 -#define RES_SYSEN 24 -#define RES_HFCLKOUT 25 -#define RES_32KCLKOUT 26 -#define RES_RESET 27 -/* Power Reference */ -#define RES_MAIN_REF 28 - -#define TOTAL_RESOURCES 28 -/* - * Power Bus Message Format ... these can be sent individually by Linux, - * but are usually part of downloaded scripts that are run when various - * power events are triggered. - * - * Broadcast Message (16 Bits): - * DEV_GRP[15:13] MT[12] RES_GRP[11:9] RES_TYPE2[8:7] RES_TYPE[6:4] - * RES_STATE[3:0] - * - * Singular Message (16 Bits): - * DEV_GRP[15:13] MT[12] RES_ID[11:4] RES_STATE[3:0] - */ - -#define MSG_BROADCAST(devgrp, grp, type, type2, state) \ - ( (devgrp) << 13 | 1 << 12 | (grp) << 9 | (type2) << 7 \ - | (type) << 4 | (state)) - -#define MSG_SINGULAR(devgrp, id, state) \ - ((devgrp) << 13 | 0 << 12 | (id) << 4 | (state)) - -#define MSG_BROADCAST_ALL(devgrp, state) \ - ((devgrp) << 5 | (state)) - -#define MSG_BROADCAST_REF MSG_BROADCAST_ALL -#define MSG_BROADCAST_PROV MSG_BROADCAST_ALL -#define MSG_BROADCAST__CLK_RST MSG_BROADCAST_ALL -/*----------------------------------------------------------------------*/ - -struct twl4030_clock_init_data { - bool ck32k_lowpwr_enable; -}; - -struct twl4030_bci_platform_data { - int *battery_tmp_tbl; - unsigned int tblsize; -}; - -/* TWL4030_GPIO_MAX (18) GPIOs, with interrupts */ -struct twl4030_gpio_platform_data { - int gpio_base; - unsigned irq_base, irq_end; - - /* package the two LED signals as output-only GPIOs? */ - bool use_leds; - - /* gpio-n should control VMMC(n+1) if BIT(n) in mmc_cd is set */ - u8 mmc_cd; - - /* if BIT(N) is set, or VMMC(n+1) is linked, debounce GPIO-N */ - u32 debounce; - - /* For gpio-N, bit (1 << N) in "pullups" is set if that pullup - * should be enabled. Else, if that bit is set in "pulldowns", - * that pulldown is enabled. Don't waste power by letting any - * digital inputs float... - */ - u32 pullups; - u32 pulldowns; - - int (*setup)(struct device *dev, - unsigned gpio, unsigned ngpio); - int (*teardown)(struct device *dev, - unsigned gpio, unsigned ngpio); -}; - -struct twl4030_madc_platform_data { - int irq_line; -}; - -/* Boards have unique mappings of {row, col} --> keycode. - * Column and row are 8 bits each, but range only from 0..7. - * a PERSISTENT_KEY is "always on" and never reported. - */ -#define PERSISTENT_KEY(r, c) KEY((r), (c), KEY_RESERVED) - -struct twl4030_keypad_data { - const struct matrix_keymap_data *keymap_data; - unsigned rows; - unsigned cols; - bool rep; -}; - -enum twl4030_usb_mode { - T2_USB_MODE_ULPI = 1, - T2_USB_MODE_CEA2011_3PIN = 2, -}; - -struct twl4030_usb_data { - enum twl4030_usb_mode usb_mode; - unsigned long features; - - int (*phy_init)(struct device *dev); - int (*phy_exit)(struct device *dev); - /* Power on/off the PHY */ - int (*phy_power)(struct device *dev, int iD, int on); - /* enable/disable phy clocks */ - int (*phy_set_clock)(struct device *dev, int on); - /* suspend/resume of phy */ - int (*phy_suspend)(struct device *dev, int suspend); -}; - -struct twl4030_ins { - u16 pmb_message; - u8 delay; -}; - -struct twl4030_script { - struct twl4030_ins *script; - unsigned size; - u8 flags; -#define TWL4030_WRST_SCRIPT (1<<0) -#define TWL4030_WAKEUP12_SCRIPT (1<<1) -#define TWL4030_WAKEUP3_SCRIPT (1<<2) -#define TWL4030_SLEEP_SCRIPT (1<<3) -}; - -struct twl4030_resconfig { - u8 resource; - u8 devgroup; /* Processor group that Power resource belongs to */ - u8 type; /* Power resource addressed, 6 / broadcast message */ - u8 type2; /* Power resource addressed, 3 / broadcast message */ - u8 remap_off; /* off state remapping */ - u8 remap_sleep; /* sleep state remapping */ -}; - -struct twl4030_power_data { - struct twl4030_script **scripts; - unsigned num; - struct twl4030_resconfig *resource_config; -#define TWL4030_RESCONFIG_UNDEF ((u8)-1) - bool use_poweroff; /* Board is wired for TWL poweroff */ -}; - -extern void twl4030_power_init(struct twl4030_power_data *triton2_scripts); -extern int twl4030_remove_script(u8 flags); -extern void twl4030_power_off(void); - -struct twl4030_codec_data { - unsigned int digimic_delay; /* in ms */ - unsigned int ramp_delay_value; - unsigned int offset_cncl_path; - unsigned int check_defaults:1; - unsigned int reset_registers:1; - unsigned int hs_extmute:1; - void (*set_hs_extmute)(int mute); -}; - -struct twl4030_vibra_data { - unsigned int coexist; -}; - -struct twl4030_audio_data { - unsigned int audio_mclk; - struct twl4030_codec_data *codec; - struct twl4030_vibra_data *vibra; - - /* twl6040 */ - int audpwron_gpio; /* audio power-on gpio */ - int naudint_irq; /* audio interrupt */ - unsigned int irq_base; -}; - -struct twl4030_platform_data { - unsigned irq_base, irq_end; - struct twl4030_clock_init_data *clock; - struct twl4030_bci_platform_data *bci; - struct twl4030_gpio_platform_data *gpio; - struct twl4030_madc_platform_data *madc; - struct twl4030_keypad_data *keypad; - struct twl4030_usb_data *usb; - struct twl4030_power_data *power; - struct twl4030_audio_data *audio; - - /* Common LDO regulators for TWL4030/TWL6030 */ - struct regulator_init_data *vdac; - struct regulator_init_data *vaux1; - struct regulator_init_data *vaux2; - struct regulator_init_data *vaux3; - struct regulator_init_data *vdd1; - struct regulator_init_data *vdd2; - struct regulator_init_data *vdd3; - /* TWL4030 LDO regulators */ - struct regulator_init_data *vpll1; - struct regulator_init_data *vpll2; - struct regulator_init_data *vmmc1; - struct regulator_init_data *vmmc2; - struct regulator_init_data *vsim; - struct regulator_init_data *vaux4; - struct regulator_init_data *vio; - struct regulator_init_data *vintana1; - struct regulator_init_data *vintana2; - struct regulator_init_data *vintdig; - /* TWL6030 LDO regulators */ - struct regulator_init_data *vmmc; - struct regulator_init_data *vpp; - struct regulator_init_data *vusim; - struct regulator_init_data *vana; - struct regulator_init_data *vcxio; - struct regulator_init_data *vusb; - struct regulator_init_data *clk32kg; - struct regulator_init_data *v1v8; - struct regulator_init_data *v2v1; - /* TWL6025 LDO regulators */ - struct regulator_init_data *ldo1; - struct regulator_init_data *ldo2; - struct regulator_init_data *ldo3; - struct regulator_init_data *ldo4; - struct regulator_init_data *ldo5; - struct regulator_init_data *ldo6; - struct regulator_init_data *ldo7; - struct regulator_init_data *ldoln; - struct regulator_init_data *ldousb; - /* TWL6025 DCDC regulators */ - struct regulator_init_data *smps3; - struct regulator_init_data *smps4; - struct regulator_init_data *vio6025; -}; - -struct twl_regulator_driver_data { - int (*set_voltage)(void *data, int target_uV); - int (*get_voltage)(void *data); - void *data; - unsigned long features; -}; - -/*----------------------------------------------------------------------*/ - -int twl4030_sih_setup(struct device *dev, int module, int irq_base); - -/* Offsets to Power Registers */ -#define TWL4030_VDAC_DEV_GRP 0x3B -#define TWL4030_VDAC_DEDICATED 0x3E -#define TWL4030_VAUX1_DEV_GRP 0x17 -#define TWL4030_VAUX1_DEDICATED 0x1A -#define TWL4030_VAUX2_DEV_GRP 0x1B -#define TWL4030_VAUX2_DEDICATED 0x1E -#define TWL4030_VAUX3_DEV_GRP 0x1F -#define TWL4030_VAUX3_DEDICATED 0x22 - -static inline int twl4030charger_usb_en(int enable) { return 0; } - -/*----------------------------------------------------------------------*/ - -/* Linux-specific regulator identifiers ... for now, we only support - * the LDOs, and leave the three buck converters alone. VDD1 and VDD2 - * need to tie into hardware based voltage scaling (cpufreq etc), while - * VIO is generally fixed. - */ - -/* TWL4030 SMPS/LDO's */ -/* EXTERNAL dc-to-dc buck converters */ -#define TWL4030_REG_VDD1 0 -#define TWL4030_REG_VDD2 1 -#define TWL4030_REG_VIO 2 - -/* EXTERNAL LDOs */ -#define TWL4030_REG_VDAC 3 -#define TWL4030_REG_VPLL1 4 -#define TWL4030_REG_VPLL2 5 /* not on all chips */ -#define TWL4030_REG_VMMC1 6 -#define TWL4030_REG_VMMC2 7 /* not on all chips */ -#define TWL4030_REG_VSIM 8 /* not on all chips */ -#define TWL4030_REG_VAUX1 9 /* not on all chips */ -#define TWL4030_REG_VAUX2_4030 10 /* (twl4030-specific) */ -#define TWL4030_REG_VAUX2 11 /* (twl5030 and newer) */ -#define TWL4030_REG_VAUX3 12 /* not on all chips */ -#define TWL4030_REG_VAUX4 13 /* not on all chips */ - -/* INTERNAL LDOs */ -#define TWL4030_REG_VINTANA1 14 -#define TWL4030_REG_VINTANA2 15 -#define TWL4030_REG_VINTDIG 16 -#define TWL4030_REG_VUSB1V5 17 -#define TWL4030_REG_VUSB1V8 18 -#define TWL4030_REG_VUSB3V1 19 - -/* TWL6030 SMPS/LDO's */ -/* EXTERNAL dc-to-dc buck convertor controllable via SR */ -#define TWL6030_REG_VDD1 30 -#define TWL6030_REG_VDD2 31 -#define TWL6030_REG_VDD3 32 - -/* Non SR compliant dc-to-dc buck convertors */ -#define TWL6030_REG_VMEM 33 -#define TWL6030_REG_V2V1 34 -#define TWL6030_REG_V1V29 35 -#define TWL6030_REG_V1V8 36 - -/* EXTERNAL LDOs */ -#define TWL6030_REG_VAUX1_6030 37 -#define TWL6030_REG_VAUX2_6030 38 -#define TWL6030_REG_VAUX3_6030 39 -#define TWL6030_REG_VMMC 40 -#define TWL6030_REG_VPP 41 -#define TWL6030_REG_VUSIM 42 -#define TWL6030_REG_VANA 43 -#define TWL6030_REG_VCXIO 44 -#define TWL6030_REG_VDAC 45 -#define TWL6030_REG_VUSB 46 - -/* INTERNAL LDOs */ -#define TWL6030_REG_VRTC 47 -#define TWL6030_REG_CLK32KG 48 - -/* LDOs on 6025 have different names */ -#define TWL6025_REG_LDO2 49 -#define TWL6025_REG_LDO4 50 -#define TWL6025_REG_LDO3 51 -#define TWL6025_REG_LDO5 52 -#define TWL6025_REG_LDO1 53 -#define TWL6025_REG_LDO7 54 -#define TWL6025_REG_LDO6 55 -#define TWL6025_REG_LDOLN 56 -#define TWL6025_REG_LDOUSB 57 - -/* 6025 DCDC supplies */ -#define TWL6025_REG_SMPS3 58 -#define TWL6025_REG_SMPS4 59 -#define TWL6025_REG_VIO 60 - - -#endif /* End of __TWL4030_H */ diff --git a/ANDROID_3.4.5/include/linux/i2c/twl4030-madc.h b/ANDROID_3.4.5/include/linux/i2c/twl4030-madc.h deleted file mode 100644 index 530e11ba..00000000 --- a/ANDROID_3.4.5/include/linux/i2c/twl4030-madc.h +++ /dev/null @@ -1,145 +0,0 @@ -/* - * twl4030_madc.h - Header for TWL4030 MADC - * - * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ - * J Keerthy <j-keerthy@ti.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - * - */ - -#ifndef _TWL4030_MADC_H -#define _TWL4030_MADC_H - -struct twl4030_madc_conversion_method { - u8 sel; - u8 avg; - u8 rbase; - u8 ctrl; -}; - -#define TWL4030_MADC_MAX_CHANNELS 16 - - -/* - * twl4030_madc_request- madc request packet for channel conversion - * @channels: 16 bit bitmap for individual channels - * @do_avgP: sample the input channel for 4 consecutive cycles - * @method: RT, SW1, SW2 - * @type: Polling or interrupt based method - */ - -struct twl4030_madc_request { - unsigned long channels; - u16 do_avg; - u16 method; - u16 type; - bool active; - bool result_pending; - int rbuf[TWL4030_MADC_MAX_CHANNELS]; - void (*func_cb)(int len, int channels, int *buf); -}; - -enum conversion_methods { - TWL4030_MADC_RT, - TWL4030_MADC_SW1, - TWL4030_MADC_SW2, - TWL4030_MADC_NUM_METHODS -}; - -enum sample_type { - TWL4030_MADC_WAIT, - TWL4030_MADC_IRQ_ONESHOT, - TWL4030_MADC_IRQ_REARM -}; - -#define TWL4030_MADC_CTRL1 0x00 -#define TWL4030_MADC_CTRL2 0x01 - -#define TWL4030_MADC_RTSELECT_LSB 0x02 -#define TWL4030_MADC_SW1SELECT_LSB 0x06 -#define TWL4030_MADC_SW2SELECT_LSB 0x0A - -#define TWL4030_MADC_RTAVERAGE_LSB 0x04 -#define TWL4030_MADC_SW1AVERAGE_LSB 0x08 -#define TWL4030_MADC_SW2AVERAGE_LSB 0x0C - -#define TWL4030_MADC_CTRL_SW1 0x12 -#define TWL4030_MADC_CTRL_SW2 0x13 - -#define TWL4030_MADC_RTCH0_LSB 0x17 -#define TWL4030_MADC_GPCH0_LSB 0x37 - -#define TWL4030_MADC_MADCON (1 << 0) /* MADC power on */ -#define TWL4030_MADC_BUSY (1 << 0) /* MADC busy */ -/* MADC conversion completion */ -#define TWL4030_MADC_EOC_SW (1 << 1) -/* MADC SWx start conversion */ -#define TWL4030_MADC_SW_START (1 << 5) -#define TWL4030_MADC_ADCIN0 (1 << 0) -#define TWL4030_MADC_ADCIN1 (1 << 1) -#define TWL4030_MADC_ADCIN2 (1 << 2) -#define TWL4030_MADC_ADCIN3 (1 << 3) -#define TWL4030_MADC_ADCIN4 (1 << 4) -#define TWL4030_MADC_ADCIN5 (1 << 5) -#define TWL4030_MADC_ADCIN6 (1 << 6) -#define TWL4030_MADC_ADCIN7 (1 << 7) -#define TWL4030_MADC_ADCIN8 (1 << 8) -#define TWL4030_MADC_ADCIN9 (1 << 9) -#define TWL4030_MADC_ADCIN10 (1 << 10) -#define TWL4030_MADC_ADCIN11 (1 << 11) -#define TWL4030_MADC_ADCIN12 (1 << 12) -#define TWL4030_MADC_ADCIN13 (1 << 13) -#define TWL4030_MADC_ADCIN14 (1 << 14) -#define TWL4030_MADC_ADCIN15 (1 << 15) - -/* Fixed channels */ -#define TWL4030_MADC_BTEMP TWL4030_MADC_ADCIN1 -#define TWL4030_MADC_VBUS TWL4030_MADC_ADCIN8 -#define TWL4030_MADC_VBKB TWL4030_MADC_ADCIN9 -#define TWL4030_MADC_ICHG TWL4030_MADC_ADCIN10 -#define TWL4030_MADC_VCHG TWL4030_MADC_ADCIN11 -#define TWL4030_MADC_VBAT TWL4030_MADC_ADCIN12 - -/* Step size and prescaler ratio */ -#define TEMP_STEP_SIZE 147 -#define TEMP_PSR_R 100 -#define CURR_STEP_SIZE 147 -#define CURR_PSR_R1 44 -#define CURR_PSR_R2 88 - -#define TWL4030_BCI_BCICTL1 0x23 -#define TWL4030_BCI_CGAIN 0x020 -#define TWL4030_BCI_MESBAT (1 << 1) -#define TWL4030_BCI_TYPEN (1 << 4) -#define TWL4030_BCI_ITHEN (1 << 3) - -#define REG_BCICTL2 0x024 -#define TWL4030_BCI_ITHSENS 0x007 - -/* Register and bits for GPBR1 register */ -#define TWL4030_REG_GPBR1 0x0c -#define TWL4030_GPBR1_MADC_HFCLK_EN (1 << 7) - -struct twl4030_madc_user_parms { - int channel; - int average; - int status; - u16 result; -}; - -int twl4030_madc_conversion(struct twl4030_madc_request *conv); -int twl4030_get_madc_conversion(int channel_no); -#endif |