diff options
Diffstat (limited to 'ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-shared.h')
| -rw-r--r-- | ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-shared.h | 435 |
1 files changed, 0 insertions, 435 deletions
diff --git a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-shared.h b/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-shared.h deleted file mode 100644 index b515d657..00000000 --- a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-shared.h +++ /dev/null @@ -1,435 +0,0 @@ -/****************************************************************************** - * - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2007 - 2012 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, - * USA - * - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * Contact Information: - * Intel Linux Wireless <ilw@linux.intel.com> - * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - * - * BSD LICENSE - * - * Copyright(c) 2005 - 2012 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - *****************************************************************************/ -#ifndef __iwl_shared_h__ -#define __iwl_shared_h__ - -#include <linux/types.h> -#include <linux/spinlock.h> -#include <linux/gfp.h> -#include <net/mac80211.h> - -#include "iwl-commands.h" -#include "iwl-fw.h" - -/** - * DOC: shared area - role and goal - * - * The shared area contains all the data exported by the upper layer to the - * other layers. Since the bus and transport layer shouldn't dereference - * iwl_priv, all the data needed by the upper layer and the transport / bus - * layer must be here. - * The shared area also holds pointer to all the other layers. This allows a - * layer to call a function from another layer. - * - * NOTE: All the layers hold a pointer to the shared area which must be shrd. - * A few macros assume that (_m)->shrd points to the shared area no matter - * what _m is. - * - * gets notifications about enumeration, suspend, resume. - * For the moment, the bus layer is not a linux kernel module as itself, and - * the module_init function of the driver must call the bus specific - * registration functions. These functions are listed at the end of this file. - * For the moment, there is only one implementation of this interface: PCI-e. - * This implementation is iwl-pci.c - */ - -struct iwl_priv; -struct iwl_trans; -struct iwl_sensitivity_ranges; -struct iwl_trans_ops; - -#define DRV_NAME "iwlwifi" -#define IWLWIFI_VERSION "in-tree:" -#define DRV_COPYRIGHT "Copyright(c) 2003-2012 Intel Corporation" -#define DRV_AUTHOR "<ilw@linux.intel.com>" - -extern struct iwl_mod_params iwlagn_mod_params; - -#define IWL_DISABLE_HT_ALL BIT(0) -#define IWL_DISABLE_HT_TXAGG BIT(1) -#define IWL_DISABLE_HT_RXAGG BIT(2) - -/** - * struct iwl_mod_params - * - * Holds the module parameters - * - * @sw_crypto: using hardware encryption, default = 0 - * @disable_11n: disable 11n capabilities, default = 0, - * use IWL_DISABLE_HT_* constants - * @amsdu_size_8K: enable 8K amsdu size, default = 1 - * @antenna: both antennas (use diversity), default = 0 - * @restart_fw: restart firmware, default = 1 - * @plcp_check: enable plcp health check, default = true - * @ack_check: disable ack health check, default = false - * @wd_disable: enable stuck queue check, default = 0 - * @bt_coex_active: enable bt coex, default = true - * @led_mode: system default, default = 0 - * @no_sleep_autoadjust: disable autoadjust, default = true - * @power_save: disable power save, default = false - * @power_level: power level, default = 1 - * @debug_level: levels are IWL_DL_* - * @ant_coupling: antenna coupling in dB, default = 0 - * @bt_ch_announce: BT channel inhibition, default = enable - * @wanted_ucode_alternative: ucode alternative to use, default = 1 - * @auto_agg: enable agg. without check, default = true - */ -struct iwl_mod_params { - int sw_crypto; - unsigned int disable_11n; - int amsdu_size_8K; - int antenna; - int restart_fw; - bool plcp_check; - bool ack_check; - int wd_disable; - bool bt_coex_active; - int led_mode; - bool no_sleep_autoadjust; - bool power_save; - int power_level; - u32 debug_level; - int ant_coupling; - bool bt_ch_announce; - int wanted_ucode_alternative; - bool auto_agg; -}; - -/** - * struct iwl_hw_params - * - * Holds the module parameters - * - * @num_ampdu_queues: num of ampdu queues - * @tx_chains_num: Number of TX chains - * @rx_chains_num: Number of RX chains - * @valid_tx_ant: usable antennas for TX - * @valid_rx_ant: usable antennas for RX - * @ht40_channel: is 40MHz width possible: BIT(IEEE80211_BAND_XXX) - * @sku: sku read from EEPROM - * @rx_page_order: Rx buffer page order - * @ct_kill_threshold: temperature threshold - in hw dependent unit - * @ct_kill_exit_threshold: when to reeable the device - in hw dependent unit - * relevant for 1000, 6000 and up - * @wd_timeout: TX queues watchdog timeout - * @struct iwl_sensitivity_ranges: range of sensitivity values - * @use_rts_for_aggregation: use rts/cts protection for HT traffic - */ -struct iwl_hw_params { - u8 num_ampdu_queues; - u8 tx_chains_num; - u8 rx_chains_num; - u8 valid_tx_ant; - u8 valid_rx_ant; - u8 ht40_channel; - bool use_rts_for_aggregation; - u16 sku; - u32 rx_page_order; - u32 ct_kill_threshold; - u32 ct_kill_exit_threshold; - unsigned int wd_timeout; - - const struct iwl_sensitivity_ranges *sens; -}; - -/* - * LED mode - * IWL_LED_DEFAULT: use device default - * IWL_LED_RF_STATE: turn LED on/off based on RF state - * LED ON = RF ON - * LED OFF = RF OFF - * IWL_LED_BLINK: adjust led blink rate based on blink table - * IWL_LED_DISABLE: led disabled - */ -enum iwl_led_mode { - IWL_LED_DEFAULT, - IWL_LED_RF_STATE, - IWL_LED_BLINK, - IWL_LED_DISABLE, -}; - -/* - * @max_ll_items: max number of OTP blocks - * @shadow_ram_support: shadow support for OTP memory - * @led_compensation: compensate on the led on/off time per HW according - * to the deviation to achieve the desired led frequency. - * The detail algorithm is described in iwl-led.c - * @chain_noise_num_beacons: number of beacons used to compute chain noise - * @adv_thermal_throttle: support advance thermal throttle - * @support_ct_kill_exit: support ct kill exit condition - * @support_wimax_coexist: support wimax/wifi co-exist - * @plcp_delta_threshold: plcp error rate threshold used to trigger - * radio tuning when there is a high receiving plcp error rate - * @chain_noise_scale: default chain noise scale used for gain computation - * @wd_timeout: TX queues watchdog timeout - * @max_event_log_size: size of event log buffer size for ucode event logging - * @shadow_reg_enable: HW shadhow register bit - * @hd_v2: v2 of enhanced sensitivity value, used for 2000 series and up - * @no_idle_support: do not support idle mode - * wd_disable: disable watchdog timer - */ -struct iwl_base_params { - int eeprom_size; - int num_of_queues; /* def: HW dependent */ - int num_of_ampdu_queues;/* def: HW dependent */ - /* for iwl_apm_init() */ - u32 pll_cfg_val; - - const u16 max_ll_items; - const bool shadow_ram_support; - u16 led_compensation; - bool adv_thermal_throttle; - bool support_ct_kill_exit; - const bool support_wimax_coexist; - u8 plcp_delta_threshold; - s32 chain_noise_scale; - unsigned int wd_timeout; - u32 max_event_log_size; - const bool shadow_reg_enable; - const bool hd_v2; - const bool no_idle_support; - const bool wd_disable; -}; - -/* - * @advanced_bt_coexist: support advanced bt coexist - * @bt_init_traffic_load: specify initial bt traffic load - * @bt_prio_boost: default bt priority boost value - * @agg_time_limit: maximum number of uSec in aggregation - * @bt_sco_disable: uCode should not response to BT in SCO/ESCO mode - */ -struct iwl_bt_params { - bool advanced_bt_coexist; - u8 bt_init_traffic_load; - u8 bt_prio_boost; - u16 agg_time_limit; - bool bt_sco_disable; - bool bt_session_2; -}; -/* - * @use_rts_for_aggregation: use rts/cts protection for HT traffic - */ -struct iwl_ht_params { - const bool ht_greenfield_support; /* if used set to true */ - bool use_rts_for_aggregation; - enum ieee80211_smps_mode smps_mode; -}; - -/** - * struct iwl_cfg - * @name: Offical name of the device - * @fw_name_pre: Firmware filename prefix. The api version and extension - * (.ucode) will be added to filename before loading from disk. The - * filename is constructed as fw_name_pre<api>.ucode. - * @ucode_api_max: Highest version of uCode API supported by driver. - * @ucode_api_ok: oldest version of the uCode API that is OK to load - * without a warning, for use in transitions - * @ucode_api_min: Lowest version of uCode API supported by driver. - * @max_inst_size: The maximal length of the fw inst section - * @max_data_size: The maximal length of the fw data section - * @valid_tx_ant: valid transmit antenna - * @valid_rx_ant: valid receive antenna - * @eeprom_ver: EEPROM version - * @eeprom_calib_ver: EEPROM calibration version - * @lib: pointer to the lib ops - * @additional_nic_config: additional nic configuration - * @base_params: pointer to basic parameters - * @ht_params: point to ht patameters - * @bt_params: pointer to bt parameters - * @need_temp_offset_calib: need to perform temperature offset calibration - * @no_xtal_calib: some devices do not need crystal calibration data, - * don't send it to those - * @scan_rx_antennas: available antenna for scan operation - * @led_mode: 0=blinking, 1=On(RF On)/Off(RF Off) - * @adv_pm: advance power management - * @rx_with_siso_diversity: 1x1 device with rx antenna diversity - * @internal_wimax_coex: internal wifi/wimax combo device - * @iq_invert: I/Q inversion - * @temp_offset_v2: support v2 of temperature offset calibration - * - * We enable the driver to be backward compatible wrt API version. The - * driver specifies which APIs it supports (with @ucode_api_max being the - * highest and @ucode_api_min the lowest). Firmware will only be loaded if - * it has a supported API version. - * - * The ideal usage of this infrastructure is to treat a new ucode API - * release as a new hardware revision. - */ -struct iwl_cfg { - /* params specific to an individual device within a device family */ - const char *name; - const char *fw_name_pre; - const unsigned int ucode_api_max; - const unsigned int ucode_api_ok; - const unsigned int ucode_api_min; - const u32 max_data_size; - const u32 max_inst_size; - u8 valid_tx_ant; - u8 valid_rx_ant; - u16 eeprom_ver; - u16 eeprom_calib_ver; - const struct iwl_lib_ops *lib; - void (*additional_nic_config)(struct iwl_priv *priv); - /* params not likely to change within a device family */ - const struct iwl_base_params *base_params; - /* params likely to change within a device family */ - const struct iwl_ht_params *ht_params; - const struct iwl_bt_params *bt_params; - const bool need_temp_offset_calib; /* if used set to true */ - const bool no_xtal_calib; - u8 scan_rx_antennas[IEEE80211_NUM_BANDS]; - enum iwl_led_mode led_mode; - const bool adv_pm; - const bool rx_with_siso_diversity; - const bool internal_wimax_coex; - const bool iq_invert; - const bool temp_offset_v2; -}; - -/** - * struct iwl_shared - shared fields for all the layers of the driver - * - * @status: STATUS_* - * @wowlan: are we running wowlan uCode - * @valid_contexts: microcode/device supports multiple contexts - * @bus: pointer to the bus layer data - * @cfg: see struct iwl_cfg - * @priv: pointer to the upper layer data - * @trans: pointer to the transport layer data - * @nic: pointer to the nic data - * @hw_params: see struct iwl_hw_params - * @lock: protect general shared data - * @eeprom: pointer to the eeprom/OTP image - * @ucode_type: indicator of loaded ucode image - * @device_pointers: pointers to ucode event tables - */ -struct iwl_shared { - unsigned long status; - u8 valid_contexts; - - const struct iwl_cfg *cfg; - struct iwl_trans *trans; - void *drv; - struct iwl_hw_params hw_params; - const struct iwl_fw *fw; - - /* eeprom -- this is in the card's little endian byte order */ - u8 *eeprom; - - /* ucode related variables */ - enum iwl_ucode_type ucode_type; - - struct { - u32 error_event_table; - u32 log_event_table; - } device_pointers; - -}; - -/*Whatever _m is (iwl_trans, iwl_priv, these macros will work */ -#define cfg(_m) ((_m)->shrd->cfg) -#define trans(_m) ((_m)->shrd->trans) -#define hw_params(_m) ((_m)->shrd->hw_params) - -static inline bool iwl_have_debug_level(u32 level) -{ - return iwlagn_mod_params.debug_level & level; -} - -enum iwl_rxon_context_id { - IWL_RXON_CTX_BSS, - IWL_RXON_CTX_PAN, - - NUM_IWL_RXON_CTX -}; - -int iwlagn_hw_valid_rtc_data_addr(u32 addr); -const char *get_cmd_string(u8 cmd); - -#define IWL_CMD(x) case x: return #x - -/***************************************************** -* DRIVER STATUS FUNCTIONS -******************************************************/ -#define STATUS_HCMD_ACTIVE 0 /* host command in progress */ -/* 1 is unused (used to be STATUS_HCMD_SYNC_ACTIVE) */ -#define STATUS_INT_ENABLED 2 -#define STATUS_RF_KILL_HW 3 -#define STATUS_CT_KILL 4 -#define STATUS_INIT 5 -#define STATUS_ALIVE 6 -#define STATUS_READY 7 -#define STATUS_TEMPERATURE 8 -#define STATUS_GEO_CONFIGURED 9 -#define STATUS_EXIT_PENDING 10 -#define STATUS_STATISTICS 12 -#define STATUS_SCANNING 13 -#define STATUS_SCAN_ABORTING 14 -#define STATUS_SCAN_HW 15 -#define STATUS_POWER_PMI 16 -#define STATUS_FW_ERROR 17 -#define STATUS_DEVICE_ENABLED 18 -#define STATUS_CHANNEL_SWITCH_PENDING 19 -#define STATUS_SCAN_COMPLETE 20 - -#endif /* #__iwl_shared_h__ */ |