diff options
Diffstat (limited to 'ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-agn.c')
| -rw-r--r-- | ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-agn.c | 1636 |
1 files changed, 0 insertions, 1636 deletions
diff --git a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-agn.c b/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-agn.c deleted file mode 100644 index 2a9a16f9..00000000 --- a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-agn.c +++ /dev/null @@ -1,1636 +0,0 @@ -/****************************************************************************** - * - * Copyright(c) 2003 - 2012 Intel Corporation. All rights reserved. - * - * Portions of this file are derived from the ipw3945 project, as well - * as portions of the ieee80211 subsystem header files. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA - * - * The full GNU General Public License is included in this distribution in the - * file called LICENSE. - * - * Contact Information: - * Intel Linux Wireless <ilw@linux.intel.com> - * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - * - *****************************************************************************/ -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/slab.h> -#include <linux/delay.h> -#include <linux/sched.h> -#include <linux/skbuff.h> -#include <linux/netdevice.h> -#include <linux/etherdevice.h> -#include <linux/if_arp.h> - -#include <net/mac80211.h> - -#include <asm/div64.h> - -#include "iwl-eeprom.h" -#include "iwl-dev.h" -#include "iwl-core.h" -#include "iwl-io.h" -#include "iwl-agn-calib.h" -#include "iwl-agn.h" -#include "iwl-shared.h" -#include "iwl-trans.h" -#include "iwl-op-mode.h" - -/****************************************************************************** - * - * module boiler plate - * - ******************************************************************************/ - -/* - * module name, copyright, version, etc. - */ -#define DRV_DESCRIPTION "Intel(R) Wireless WiFi Link AGN driver for Linux" - -#ifdef CONFIG_IWLWIFI_DEBUG -#define VD "d" -#else -#define VD -#endif - -#define DRV_VERSION IWLWIFI_VERSION VD - - -MODULE_DESCRIPTION(DRV_DESCRIPTION); -MODULE_VERSION(DRV_VERSION); -MODULE_AUTHOR(DRV_COPYRIGHT " " DRV_AUTHOR); -MODULE_LICENSE("GPL"); -MODULE_ALIAS("iwlagn"); - -void iwl_update_chain_flags(struct iwl_priv *priv) -{ - struct iwl_rxon_context *ctx; - - for_each_context(priv, ctx) { - iwlagn_set_rxon_chain(priv, ctx); - if (ctx->active.rx_chain != ctx->staging.rx_chain) - iwlagn_commit_rxon(priv, ctx); - } -} - -/* Parse the beacon frame to find the TIM element and set tim_idx & tim_size */ -static void iwl_set_beacon_tim(struct iwl_priv *priv, - struct iwl_tx_beacon_cmd *tx_beacon_cmd, - u8 *beacon, u32 frame_size) -{ - u16 tim_idx; - struct ieee80211_mgmt *mgmt = (struct ieee80211_mgmt *)beacon; - - /* - * The index is relative to frame start but we start looking at the - * variable-length part of the beacon. - */ - tim_idx = mgmt->u.beacon.variable - beacon; - - /* Parse variable-length elements of beacon to find WLAN_EID_TIM */ - while ((tim_idx < (frame_size - 2)) && - (beacon[tim_idx] != WLAN_EID_TIM)) - tim_idx += beacon[tim_idx+1] + 2; - - /* If TIM field was found, set variables */ - if ((tim_idx < (frame_size - 1)) && (beacon[tim_idx] == WLAN_EID_TIM)) { - tx_beacon_cmd->tim_idx = cpu_to_le16(tim_idx); - tx_beacon_cmd->tim_size = beacon[tim_idx+1]; - } else - IWL_WARN(priv, "Unable to find TIM Element in beacon\n"); -} - -int iwlagn_send_beacon_cmd(struct iwl_priv *priv) -{ - struct iwl_tx_beacon_cmd *tx_beacon_cmd; - struct iwl_host_cmd cmd = { - .id = REPLY_TX_BEACON, - .flags = CMD_SYNC, - }; - struct ieee80211_tx_info *info; - u32 frame_size; - u32 rate_flags; - u32 rate; - - /* - * We have to set up the TX command, the TX Beacon command, and the - * beacon contents. - */ - - lockdep_assert_held(&priv->mutex); - - if (!priv->beacon_ctx) { - IWL_ERR(priv, "trying to build beacon w/o beacon context!\n"); - return 0; - } - - if (WARN_ON(!priv->beacon_skb)) - return -EINVAL; - - /* Allocate beacon command */ - if (!priv->beacon_cmd) - priv->beacon_cmd = kzalloc(sizeof(*tx_beacon_cmd), GFP_KERNEL); - tx_beacon_cmd = priv->beacon_cmd; - if (!tx_beacon_cmd) - return -ENOMEM; - - frame_size = priv->beacon_skb->len; - - /* Set up TX command fields */ - tx_beacon_cmd->tx.len = cpu_to_le16((u16)frame_size); - tx_beacon_cmd->tx.sta_id = priv->beacon_ctx->bcast_sta_id; - tx_beacon_cmd->tx.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE; - tx_beacon_cmd->tx.tx_flags = TX_CMD_FLG_SEQ_CTL_MSK | - TX_CMD_FLG_TSF_MSK | TX_CMD_FLG_STA_RATE_MSK; - - /* Set up TX beacon command fields */ - iwl_set_beacon_tim(priv, tx_beacon_cmd, priv->beacon_skb->data, - frame_size); - - /* Set up packet rate and flags */ - info = IEEE80211_SKB_CB(priv->beacon_skb); - - /* - * Let's set up the rate at least somewhat correctly; - * it will currently not actually be used by the uCode, - * it uses the broadcast station's rate instead. - */ - if (info->control.rates[0].idx < 0 || - info->control.rates[0].flags & IEEE80211_TX_RC_MCS) - rate = 0; - else - rate = info->control.rates[0].idx; - - priv->mgmt_tx_ant = iwl_toggle_tx_ant(priv, priv->mgmt_tx_ant, - hw_params(priv).valid_tx_ant); - rate_flags = iwl_ant_idx_to_flags(priv->mgmt_tx_ant); - - /* In mac80211, rates for 5 GHz start at 0 */ - if (info->band == IEEE80211_BAND_5GHZ) - rate += IWL_FIRST_OFDM_RATE; - else if (rate >= IWL_FIRST_CCK_RATE && rate <= IWL_LAST_CCK_RATE) - rate_flags |= RATE_MCS_CCK_MSK; - - tx_beacon_cmd->tx.rate_n_flags = - iwl_hw_set_rate_n_flags(rate, rate_flags); - - /* Submit command */ - cmd.len[0] = sizeof(*tx_beacon_cmd); - cmd.data[0] = tx_beacon_cmd; - cmd.dataflags[0] = IWL_HCMD_DFL_NOCOPY; - cmd.len[1] = frame_size; - cmd.data[1] = priv->beacon_skb->data; - cmd.dataflags[1] = IWL_HCMD_DFL_NOCOPY; - - return iwl_dvm_send_cmd(priv, &cmd); -} - -static void iwl_bg_beacon_update(struct work_struct *work) -{ - struct iwl_priv *priv = - container_of(work, struct iwl_priv, beacon_update); - struct sk_buff *beacon; - - mutex_lock(&priv->mutex); - if (!priv->beacon_ctx) { - IWL_ERR(priv, "updating beacon w/o beacon context!\n"); - goto out; - } - - if (priv->beacon_ctx->vif->type != NL80211_IFTYPE_AP) { - /* - * The ucode will send beacon notifications even in - * IBSS mode, but we don't want to process them. But - * we need to defer the type check to here due to - * requiring locking around the beacon_ctx access. - */ - goto out; - } - - /* Pull updated AP beacon from mac80211. will fail if not in AP mode */ - beacon = ieee80211_beacon_get(priv->hw, priv->beacon_ctx->vif); - if (!beacon) { - IWL_ERR(priv, "update beacon failed -- keeping old\n"); - goto out; - } - - /* new beacon skb is allocated every time; dispose previous.*/ - dev_kfree_skb(priv->beacon_skb); - - priv->beacon_skb = beacon; - - iwlagn_send_beacon_cmd(priv); - out: - mutex_unlock(&priv->mutex); -} - -static void iwl_bg_bt_runtime_config(struct work_struct *work) -{ - struct iwl_priv *priv = - container_of(work, struct iwl_priv, bt_runtime_config); - - if (test_bit(STATUS_EXIT_PENDING, &priv->status)) - return; - - /* dont send host command if rf-kill is on */ - if (!iwl_is_ready_rf(priv)) - return; - iwlagn_send_advance_bt_config(priv); -} - -static void iwl_bg_bt_full_concurrency(struct work_struct *work) -{ - struct iwl_priv *priv = - container_of(work, struct iwl_priv, bt_full_concurrency); - struct iwl_rxon_context *ctx; - - mutex_lock(&priv->mutex); - - if (test_bit(STATUS_EXIT_PENDING, &priv->status)) - goto out; - - /* dont send host command if rf-kill is on */ - if (!iwl_is_ready_rf(priv)) - goto out; - - IWL_DEBUG_INFO(priv, "BT coex in %s mode\n", - priv->bt_full_concurrent ? - "full concurrency" : "3-wire"); - - /* - * LQ & RXON updated cmds must be sent before BT Config cmd - * to avoid 3-wire collisions - */ - for_each_context(priv, ctx) { - iwlagn_set_rxon_chain(priv, ctx); - iwlagn_commit_rxon(priv, ctx); - } - - iwlagn_send_advance_bt_config(priv); -out: - mutex_unlock(&priv->mutex); -} - -/** - * iwl_bg_statistics_periodic - Timer callback to queue statistics - * - * This callback is provided in order to send a statistics request. - * - * This timer function is continually reset to execute within - * REG_RECALIB_PERIOD seconds since the last STATISTICS_NOTIFICATION - * was received. We need to ensure we receive the statistics in order - * to update the temperature used for calibrating the TXPOWER. - */ -static void iwl_bg_statistics_periodic(unsigned long data) -{ - struct iwl_priv *priv = (struct iwl_priv *)data; - - if (test_bit(STATUS_EXIT_PENDING, &priv->status)) - return; - - /* dont send host command if rf-kill is on */ - if (!iwl_is_ready_rf(priv)) - return; - - iwl_send_statistics_request(priv, CMD_ASYNC, false); -} - - -static void iwl_print_cont_event_trace(struct iwl_priv *priv, u32 base, - u32 start_idx, u32 num_events, - u32 capacity, u32 mode) -{ - u32 i; - u32 ptr; /* SRAM byte address of log data */ - u32 ev, time, data; /* event log data */ - unsigned long reg_flags; - - if (mode == 0) - ptr = base + (4 * sizeof(u32)) + (start_idx * 2 * sizeof(u32)); - else - ptr = base + (4 * sizeof(u32)) + (start_idx * 3 * sizeof(u32)); - - /* Make sure device is powered up for SRAM reads */ - spin_lock_irqsave(&trans(priv)->reg_lock, reg_flags); - if (unlikely(!iwl_grab_nic_access(trans(priv)))) { - spin_unlock_irqrestore(&trans(priv)->reg_lock, reg_flags); - return; - } - - /* Set starting address; reads will auto-increment */ - iwl_write32(trans(priv), HBUS_TARG_MEM_RADDR, ptr); - - /* - * Refuse to read more than would have fit into the log from - * the current start_idx. This used to happen due to the race - * described below, but now WARN because the code below should - * prevent it from happening here. - */ - if (WARN_ON(num_events > capacity - start_idx)) - num_events = capacity - start_idx; - - /* - * "time" is actually "data" for mode 0 (no timestamp). - * place event id # at far right for easier visual parsing. - */ - for (i = 0; i < num_events; i++) { - ev = iwl_read32(trans(priv), HBUS_TARG_MEM_RDAT); - time = iwl_read32(trans(priv), HBUS_TARG_MEM_RDAT); - if (mode == 0) { - trace_iwlwifi_dev_ucode_cont_event( - trans(priv)->dev, 0, time, ev); - } else { - data = iwl_read32(trans(priv), HBUS_TARG_MEM_RDAT); - trace_iwlwifi_dev_ucode_cont_event( - trans(priv)->dev, time, data, ev); - } - } - /* Allow device to power down */ - iwl_release_nic_access(trans(priv)); - spin_unlock_irqrestore(&trans(priv)->reg_lock, reg_flags); -} - -static void iwl_continuous_event_trace(struct iwl_priv *priv) -{ - u32 capacity; /* event log capacity in # entries */ - struct { - u32 capacity; - u32 mode; - u32 wrap_counter; - u32 write_counter; - } __packed read; - u32 base; /* SRAM byte address of event log header */ - u32 mode; /* 0 - no timestamp, 1 - timestamp recorded */ - u32 num_wraps; /* # times uCode wrapped to top of log */ - u32 next_entry; /* index of next entry to be written by uCode */ - - base = priv->shrd->device_pointers.log_event_table; - if (iwlagn_hw_valid_rtc_data_addr(base)) { - iwl_read_targ_mem_words(trans(priv), base, &read, sizeof(read)); - - capacity = read.capacity; - mode = read.mode; - num_wraps = read.wrap_counter; - next_entry = read.write_counter; - } else - return; - - /* - * Unfortunately, the uCode doesn't use temporary variables. - * Therefore, it can happen that we read next_entry == capacity, - * which really means next_entry == 0. - */ - if (unlikely(next_entry == capacity)) - next_entry = 0; - /* - * Additionally, the uCode increases the write pointer before - * the wraps counter, so if the write pointer is smaller than - * the old write pointer (wrap occurred) but we read that no - * wrap occurred, we actually read between the next_entry and - * num_wraps update (this does happen in practice!!) -- take - * that into account by increasing num_wraps. - */ - if (unlikely(next_entry < priv->event_log.next_entry && - num_wraps == priv->event_log.num_wraps)) - num_wraps++; - - if (num_wraps == priv->event_log.num_wraps) { - iwl_print_cont_event_trace( - priv, base, priv->event_log.next_entry, - next_entry - priv->event_log.next_entry, - capacity, mode); - - priv->event_log.non_wraps_count++; - } else { - if (num_wraps - priv->event_log.num_wraps > 1) - priv->event_log.wraps_more_count++; - else - priv->event_log.wraps_once_count++; - - trace_iwlwifi_dev_ucode_wrap_event(trans(priv)->dev, - num_wraps - priv->event_log.num_wraps, - next_entry, priv->event_log.next_entry); - - if (next_entry < priv->event_log.next_entry) { - iwl_print_cont_event_trace( - priv, base, priv->event_log.next_entry, - capacity - priv->event_log.next_entry, - capacity, mode); - - iwl_print_cont_event_trace( - priv, base, 0, next_entry, capacity, mode); - } else { - iwl_print_cont_event_trace( - priv, base, next_entry, - capacity - next_entry, - capacity, mode); - - iwl_print_cont_event_trace( - priv, base, 0, next_entry, capacity, mode); - } - } - - priv->event_log.num_wraps = num_wraps; - priv->event_log.next_entry = next_entry; -} - -/** - * iwl_bg_ucode_trace - Timer callback to log ucode event - * - * The timer is continually set to execute every - * UCODE_TRACE_PERIOD milliseconds after the last timer expired - * this function is to perform continuous uCode event logging operation - * if enabled - */ -static void iwl_bg_ucode_trace(unsigned long data) -{ - struct iwl_priv *priv = (struct iwl_priv *)data; - - if (test_bit(STATUS_EXIT_PENDING, &priv->status)) - return; - - if (priv->event_log.ucode_trace) { - iwl_continuous_event_trace(priv); - /* Reschedule the timer to occur in UCODE_TRACE_PERIOD */ - mod_timer(&priv->ucode_trace, - jiffies + msecs_to_jiffies(UCODE_TRACE_PERIOD)); - } -} - -static void iwl_bg_tx_flush(struct work_struct *work) -{ - struct iwl_priv *priv = - container_of(work, struct iwl_priv, tx_flush); - - if (test_bit(STATUS_EXIT_PENDING, &priv->status)) - return; - - /* do nothing if rf-kill is on */ - if (!iwl_is_ready_rf(priv)) - return; - - IWL_DEBUG_INFO(priv, "device request: flush all tx frames\n"); - iwlagn_dev_txfifo_flush(priv, IWL_DROP_ALL); -} - -static void iwl_init_context(struct iwl_priv *priv, u32 ucode_flags) -{ - int i; - - /* - * The default context is always valid, - * the PAN context depends on uCode. - */ - priv->shrd->valid_contexts = BIT(IWL_RXON_CTX_BSS); - if (ucode_flags & IWL_UCODE_TLV_FLAGS_PAN) - priv->shrd->valid_contexts |= BIT(IWL_RXON_CTX_PAN); - - for (i = 0; i < NUM_IWL_RXON_CTX; i++) - priv->contexts[i].ctxid = i; - - priv->contexts[IWL_RXON_CTX_BSS].always_active = true; - priv->contexts[IWL_RXON_CTX_BSS].is_active = true; - priv->contexts[IWL_RXON_CTX_BSS].rxon_cmd = REPLY_RXON; - priv->contexts[IWL_RXON_CTX_BSS].rxon_timing_cmd = REPLY_RXON_TIMING; - priv->contexts[IWL_RXON_CTX_BSS].rxon_assoc_cmd = REPLY_RXON_ASSOC; - priv->contexts[IWL_RXON_CTX_BSS].qos_cmd = REPLY_QOS_PARAM; - priv->contexts[IWL_RXON_CTX_BSS].ap_sta_id = IWL_AP_ID; - priv->contexts[IWL_RXON_CTX_BSS].wep_key_cmd = REPLY_WEPKEY; - priv->contexts[IWL_RXON_CTX_BSS].bcast_sta_id = IWLAGN_BROADCAST_ID; - priv->contexts[IWL_RXON_CTX_BSS].exclusive_interface_modes = - BIT(NL80211_IFTYPE_ADHOC); - priv->contexts[IWL_RXON_CTX_BSS].interface_modes = - BIT(NL80211_IFTYPE_STATION); - priv->contexts[IWL_RXON_CTX_BSS].ap_devtype = RXON_DEV_TYPE_AP; - priv->contexts[IWL_RXON_CTX_BSS].ibss_devtype = RXON_DEV_TYPE_IBSS; - priv->contexts[IWL_RXON_CTX_BSS].station_devtype = RXON_DEV_TYPE_ESS; - priv->contexts[IWL_RXON_CTX_BSS].unused_devtype = RXON_DEV_TYPE_ESS; - - priv->contexts[IWL_RXON_CTX_PAN].rxon_cmd = REPLY_WIPAN_RXON; - priv->contexts[IWL_RXON_CTX_PAN].rxon_timing_cmd = - REPLY_WIPAN_RXON_TIMING; - priv->contexts[IWL_RXON_CTX_PAN].rxon_assoc_cmd = - REPLY_WIPAN_RXON_ASSOC; - priv->contexts[IWL_RXON_CTX_PAN].qos_cmd = REPLY_WIPAN_QOS_PARAM; - priv->contexts[IWL_RXON_CTX_PAN].ap_sta_id = IWL_AP_ID_PAN; - priv->contexts[IWL_RXON_CTX_PAN].wep_key_cmd = REPLY_WIPAN_WEPKEY; - priv->contexts[IWL_RXON_CTX_PAN].bcast_sta_id = IWLAGN_PAN_BCAST_ID; - priv->contexts[IWL_RXON_CTX_PAN].station_flags = STA_FLG_PAN_STATION; - priv->contexts[IWL_RXON_CTX_PAN].interface_modes = - BIT(NL80211_IFTYPE_STATION) | BIT(NL80211_IFTYPE_AP); - - if (ucode_flags & IWL_UCODE_TLV_FLAGS_P2P) - priv->contexts[IWL_RXON_CTX_PAN].interface_modes |= - BIT(NL80211_IFTYPE_P2P_CLIENT) | - BIT(NL80211_IFTYPE_P2P_GO); - - priv->contexts[IWL_RXON_CTX_PAN].ap_devtype = RXON_DEV_TYPE_CP; - priv->contexts[IWL_RXON_CTX_PAN].station_devtype = RXON_DEV_TYPE_2STA; - priv->contexts[IWL_RXON_CTX_PAN].unused_devtype = RXON_DEV_TYPE_P2P; - - BUILD_BUG_ON(NUM_IWL_RXON_CTX != 2); -} - -static void iwl_rf_kill_ct_config(struct iwl_priv *priv) -{ - struct iwl_ct_kill_config cmd; - struct iwl_ct_kill_throttling_config adv_cmd; - int ret = 0; - - iwl_write32(trans(priv), CSR_UCODE_DRV_GP1_CLR, - CSR_UCODE_DRV_GP1_REG_BIT_CT_KILL_EXIT); - - priv->thermal_throttle.ct_kill_toggle = false; - - if (cfg(priv)->base_params->support_ct_kill_exit) { - adv_cmd.critical_temperature_enter = - cpu_to_le32(hw_params(priv).ct_kill_threshold); - adv_cmd.critical_temperature_exit = - cpu_to_le32(hw_params(priv).ct_kill_exit_threshold); - - ret = iwl_dvm_send_cmd_pdu(priv, - REPLY_CT_KILL_CONFIG_CMD, - CMD_SYNC, sizeof(adv_cmd), &adv_cmd); - if (ret) - IWL_ERR(priv, "REPLY_CT_KILL_CONFIG_CMD failed\n"); - else - IWL_DEBUG_INFO(priv, "REPLY_CT_KILL_CONFIG_CMD " - "succeeded, critical temperature enter is %d," - "exit is %d\n", - hw_params(priv).ct_kill_threshold, - hw_params(priv).ct_kill_exit_threshold); - } else { - cmd.critical_temperature_R = - cpu_to_le32(hw_params(priv).ct_kill_threshold); - - ret = iwl_dvm_send_cmd_pdu(priv, - REPLY_CT_KILL_CONFIG_CMD, - CMD_SYNC, sizeof(cmd), &cmd); - if (ret) - IWL_ERR(priv, "REPLY_CT_KILL_CONFIG_CMD failed\n"); - else - IWL_DEBUG_INFO(priv, "REPLY_CT_KILL_CONFIG_CMD " - "succeeded, " - "critical temperature is %d\n", - hw_params(priv).ct_kill_threshold); - } -} - -static int iwlagn_send_calib_cfg_rt(struct iwl_priv *priv, u32 cfg) -{ - struct iwl_calib_cfg_cmd calib_cfg_cmd; - struct iwl_host_cmd cmd = { - .id = CALIBRATION_CFG_CMD, - .len = { sizeof(struct iwl_calib_cfg_cmd), }, - .data = { &calib_cfg_cmd, }, - }; - - memset(&calib_cfg_cmd, 0, sizeof(calib_cfg_cmd)); - calib_cfg_cmd.ucd_calib_cfg.once.is_enable = IWL_CALIB_RT_CFG_ALL; - calib_cfg_cmd.ucd_calib_cfg.once.start = cpu_to_le32(cfg); - - return iwl_dvm_send_cmd(priv, &cmd); -} - - -static int iwlagn_send_tx_ant_config(struct iwl_priv *priv, u8 valid_tx_ant) -{ - struct iwl_tx_ant_config_cmd tx_ant_cmd = { - .valid = cpu_to_le32(valid_tx_ant), - }; - - if (IWL_UCODE_API(priv->fw->ucode_ver) > 1) { - IWL_DEBUG_HC(priv, "select valid tx ant: %u\n", valid_tx_ant); - return iwl_dvm_send_cmd_pdu(priv, - TX_ANT_CONFIGURATION_CMD, - CMD_SYNC, - sizeof(struct iwl_tx_ant_config_cmd), - &tx_ant_cmd); - } else { - IWL_DEBUG_HC(priv, "TX_ANT_CONFIGURATION_CMD not supported\n"); - return -EOPNOTSUPP; - } -} - -/** - * iwl_alive_start - called after REPLY_ALIVE notification received - * from protocol/runtime uCode (initialization uCode's - * Alive gets handled by iwl_init_alive_start()). - */ -int iwl_alive_start(struct iwl_priv *priv) -{ - int ret = 0; - struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS]; - - IWL_DEBUG_INFO(priv, "Runtime Alive received.\n"); - - /* After the ALIVE response, we can send host commands to the uCode */ - set_bit(STATUS_ALIVE, &priv->status); - - /* Enable watchdog to monitor the driver tx queues */ - iwl_setup_watchdog(priv); - - if (iwl_is_rfkill(priv)) - return -ERFKILL; - - if (priv->event_log.ucode_trace) { - /* start collecting data now */ - mod_timer(&priv->ucode_trace, jiffies); - } - - /* download priority table before any calibration request */ - if (cfg(priv)->bt_params && - cfg(priv)->bt_params->advanced_bt_coexist) { - /* Configure Bluetooth device coexistence support */ - if (cfg(priv)->bt_params->bt_sco_disable) - priv->bt_enable_pspoll = false; - else - priv->bt_enable_pspoll = true; - - priv->bt_valid = IWLAGN_BT_ALL_VALID_MSK; - priv->kill_ack_mask = IWLAGN_BT_KILL_ACK_MASK_DEFAULT; - priv->kill_cts_mask = IWLAGN_BT_KILL_CTS_MASK_DEFAULT; - iwlagn_send_advance_bt_config(priv); - priv->bt_valid = IWLAGN_BT_VALID_ENABLE_FLAGS; - priv->cur_rssi_ctx = NULL; - - iwl_send_prio_tbl(priv); - - /* FIXME: w/a to force change uCode BT state machine */ - ret = iwl_send_bt_env(priv, IWL_BT_COEX_ENV_OPEN, - BT_COEX_PRIO_TBL_EVT_INIT_CALIB2); - if (ret) - return ret; - ret = iwl_send_bt_env(priv, IWL_BT_COEX_ENV_CLOSE, - BT_COEX_PRIO_TBL_EVT_INIT_CALIB2); - if (ret) - return ret; - } else { - /* - * default is 2-wire BT coexexistence support - */ - iwl_send_bt_config(priv); - } - - /* - * Perform runtime calibrations, including DC calibration. - */ - iwlagn_send_calib_cfg_rt(priv, IWL_CALIB_CFG_DC_IDX); - - ieee80211_wake_queues(priv->hw); - - priv->active_rate = IWL_RATES_MASK; - - /* Configure Tx antenna selection based on H/W config */ - iwlagn_send_tx_ant_config(priv, hw_params(priv).valid_tx_ant); - - if (iwl_is_associated_ctx(ctx) && !priv->wowlan) { - struct iwl_rxon_cmd *active_rxon = - (struct iwl_rxon_cmd *)&ctx->active; - /* apply any changes in staging */ - ctx->staging.filter_flags |= RXON_FILTER_ASSOC_MSK; - active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK; - } else { - struct iwl_rxon_context *tmp; - /* Initialize our rx_config data */ - for_each_context(priv, tmp) - iwl_connection_init_rx_config(priv, tmp); - - iwlagn_set_rxon_chain(priv, ctx); - } - - if (!priv->wowlan) { - /* WoWLAN ucode will not reply in the same way, skip it */ - iwl_reset_run_time_calib(priv); - } - - set_bit(STATUS_READY, &priv->status); - - /* Configure the adapter for unassociated operation */ - ret = iwlagn_commit_rxon(priv, ctx); - if (ret) - return ret; - - /* At this point, the NIC is initialized and operational */ - iwl_rf_kill_ct_config(priv); - - IWL_DEBUG_INFO(priv, "ALIVE processing complete.\n"); - - return iwl_power_update_mode(priv, true); -} - -/** - * iwl_clear_driver_stations - clear knowledge of all stations from driver - * @priv: iwl priv struct - * - * This is called during iwl_down() to make sure that in the case - * we're coming there from a hardware restart mac80211 will be - * able to reconfigure stations -- if we're getting there in the - * normal down flow then the stations will already be cleared. - */ -static void iwl_clear_driver_stations(struct iwl_priv *priv) -{ - struct iwl_rxon_context *ctx; - - spin_lock_bh(&priv->sta_lock); - memset(priv->stations, 0, sizeof(priv->stations)); - priv->num_stations = 0; - - priv->ucode_key_table = 0; - - for_each_context(priv, ctx) { - /* - * Remove all key information that is not stored as part - * of station information since mac80211 may not have had - * a chance to remove all the keys. When device is - * reconfigured by mac80211 after an error all keys will - * be reconfigured. - */ - memset(ctx->wep_keys, 0, sizeof(ctx->wep_keys)); - ctx->key_mapping_keys = 0; - } - - spin_unlock_bh(&priv->sta_lock); -} - -void iwl_down(struct iwl_priv *priv) -{ - int exit_pending; - - IWL_DEBUG_INFO(priv, DRV_NAME " is going down\n"); - - lockdep_assert_held(&priv->mutex); - - iwl_scan_cancel_timeout(priv, 200); - - /* - * If active, scanning won't cancel it, so say it expired. - * No race since we hold the mutex here and a new one - * can't come in at this time. - */ - ieee80211_remain_on_channel_expired(priv->hw); - - exit_pending = - test_and_set_bit(STATUS_EXIT_PENDING, &priv->status); - - /* Stop TX queues watchdog. We need to have STATUS_EXIT_PENDING bit set - * to prevent rearm timer */ - del_timer_sync(&priv->watchdog); - - iwl_clear_ucode_stations(priv, NULL); - iwl_dealloc_bcast_stations(priv); - iwl_clear_driver_stations(priv); - - /* reset BT coex data */ - priv->bt_status = 0; - priv->cur_rssi_ctx = NULL; - priv->bt_is_sco = 0; - if (cfg(priv)->bt_params) - priv->bt_traffic_load = - cfg(priv)->bt_params->bt_init_traffic_load; - else - priv->bt_traffic_load = 0; - priv->bt_full_concurrent = false; - priv->bt_ci_compliance = 0; - - /* Wipe out the EXIT_PENDING status bit if we are not actually - * exiting the module */ - if (!exit_pending) - clear_bit(STATUS_EXIT_PENDING, &priv->status); - - if (priv->mac80211_registered) - ieee80211_stop_queues(priv->hw); - - priv->ucode_loaded = false; - iwl_trans_stop_device(trans(priv)); - - /* Clear out all status bits but a few that are stable across reset */ - priv->status &= test_bit(STATUS_RF_KILL_HW, &priv->status) << - STATUS_RF_KILL_HW | - test_bit(STATUS_GEO_CONFIGURED, &priv->status) << - STATUS_GEO_CONFIGURED | - test_bit(STATUS_EXIT_PENDING, &priv->status) << - STATUS_EXIT_PENDING; - priv->shrd->status &= - test_bit(STATUS_FW_ERROR, &priv->shrd->status) << - STATUS_FW_ERROR; - - dev_kfree_skb(priv->beacon_skb); - priv->beacon_skb = NULL; -} - -/***************************************************************************** - * - * Workqueue callbacks - * - *****************************************************************************/ - -static void iwl_bg_run_time_calib_work(struct work_struct *work) -{ - struct iwl_priv *priv = container_of(work, struct iwl_priv, - run_time_calib_work); - - mutex_lock(&priv->mutex); - - if (test_bit(STATUS_EXIT_PENDING, &priv->status) || - test_bit(STATUS_SCANNING, &priv->status)) { - mutex_unlock(&priv->mutex); - return; - } - - if (priv->start_calib) { - iwl_chain_noise_calibration(priv); - iwl_sensitivity_calibration(priv); - } - - mutex_unlock(&priv->mutex); -} - -void iwlagn_prepare_restart(struct iwl_priv *priv) -{ - bool bt_full_concurrent; - u8 bt_ci_compliance; - u8 bt_load; - u8 bt_status; - bool bt_is_sco; - - lockdep_assert_held(&priv->mutex); - - priv->is_open = 0; - - /* - * __iwl_down() will clear the BT status variables, - * which is correct, but when we restart we really - * want to keep them so restore them afterwards. - * - * The restart process will later pick them up and - * re-configure the hw when we reconfigure the BT - * command. - */ - bt_full_concurrent = priv->bt_full_concurrent; - bt_ci_compliance = priv->bt_ci_compliance; - bt_load = priv->bt_traffic_load; - bt_status = priv->bt_status; - bt_is_sco = priv->bt_is_sco; - - iwl_down(priv); - - priv->bt_full_concurrent = bt_full_concurrent; - priv->bt_ci_compliance = bt_ci_compliance; - priv->bt_traffic_load = bt_load; - priv->bt_status = bt_status; - priv->bt_is_sco = bt_is_sco; -} - -static void iwl_bg_restart(struct work_struct *data) -{ - struct iwl_priv *priv = container_of(data, struct iwl_priv, restart); - - if (test_bit(STATUS_EXIT_PENDING, &priv->status)) - return; - - if (test_and_clear_bit(STATUS_FW_ERROR, &priv->shrd->status)) { - mutex_lock(&priv->mutex); - iwlagn_prepare_restart(priv); - mutex_unlock(&priv->mutex); - iwl_cancel_deferred_work(priv); - ieee80211_restart_hw(priv->hw); - } else { - WARN_ON(1); - } -} - - - - -void iwlagn_disable_roc(struct iwl_priv *priv) -{ - struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_PAN]; - - lockdep_assert_held(&priv->mutex); - - if (!priv->hw_roc_setup) - return; - - ctx->staging.dev_type = RXON_DEV_TYPE_P2P; - ctx->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK; - - priv->hw_roc_channel = NULL; - - memset(ctx->staging.node_addr, 0, ETH_ALEN); - - iwlagn_commit_rxon(priv, ctx); - - ctx->is_active = false; - priv->hw_roc_setup = false; -} - -static void iwlagn_disable_roc_work(struct work_struct *work) -{ - struct iwl_priv *priv = container_of(work, struct iwl_priv, - hw_roc_disable_work.work); - - mutex_lock(&priv->mutex); - iwlagn_disable_roc(priv); - mutex_unlock(&priv->mutex); -} - -/***************************************************************************** - * - * driver setup and teardown - * - *****************************************************************************/ - -static void iwl_setup_deferred_work(struct iwl_priv *priv) -{ - priv->workqueue = create_singlethread_workqueue(DRV_NAME); - - INIT_WORK(&priv->restart, iwl_bg_restart); - INIT_WORK(&priv->beacon_update, iwl_bg_beacon_update); - INIT_WORK(&priv->run_time_calib_work, iwl_bg_run_time_calib_work); - INIT_WORK(&priv->tx_flush, iwl_bg_tx_flush); - INIT_WORK(&priv->bt_full_concurrency, iwl_bg_bt_full_concurrency); - INIT_WORK(&priv->bt_runtime_config, iwl_bg_bt_runtime_config); - INIT_DELAYED_WORK(&priv->hw_roc_disable_work, - iwlagn_disable_roc_work); - - iwl_setup_scan_deferred_work(priv); - - if (cfg(priv)->bt_params) - iwlagn_bt_setup_deferred_work(priv); - - init_timer(&priv->statistics_periodic); - priv->statistics_periodic.data = (unsigned long)priv; - priv->statistics_periodic.function = iwl_bg_statistics_periodic; - - init_timer(&priv->ucode_trace); - priv->ucode_trace.data = (unsigned long)priv; - priv->ucode_trace.function = iwl_bg_ucode_trace; - - init_timer(&priv->watchdog); - priv->watchdog.data = (unsigned long)priv; - priv->watchdog.function = iwl_bg_watchdog; -} - -void iwl_cancel_deferred_work(struct iwl_priv *priv) -{ - if (cfg(priv)->bt_params) - iwlagn_bt_cancel_deferred_work(priv); - - cancel_work_sync(&priv->run_time_calib_work); - cancel_work_sync(&priv->beacon_update); - - iwl_cancel_scan_deferred_work(priv); - - cancel_work_sync(&priv->bt_full_concurrency); - cancel_work_sync(&priv->bt_runtime_config); - cancel_delayed_work_sync(&priv->hw_roc_disable_work); - - del_timer_sync(&priv->statistics_periodic); - del_timer_sync(&priv->ucode_trace); -} - -static void iwl_init_hw_rates(struct ieee80211_rate *rates) -{ - int i; - - for (i = 0; i < IWL_RATE_COUNT_LEGACY; i++) { - rates[i].bitrate = iwl_rates[i].ieee * 5; - rates[i].hw_value = i; /* Rate scaling will work on indexes */ - rates[i].hw_value_short = i; - rates[i].flags = 0; - if ((i >= IWL_FIRST_CCK_RATE) && (i <= IWL_LAST_CCK_RATE)) { - /* - * If CCK != 1M then set short preamble rate flag. - */ - rates[i].flags |= - (iwl_rates[i].plcp == IWL_RATE_1M_PLCP) ? - 0 : IEEE80211_RATE_SHORT_PREAMBLE; - } - } -} - -static int iwl_init_drv(struct iwl_priv *priv) -{ - int ret; - - spin_lock_init(&priv->sta_lock); - - mutex_init(&priv->mutex); - - INIT_LIST_HEAD(&priv->calib_results); - - priv->ieee_channels = NULL; - priv->ieee_rates = NULL; - priv->band = IEEE80211_BAND_2GHZ; - - priv->plcp_delta_threshold = - cfg(priv)->base_params->plcp_delta_threshold; - - priv->iw_mode = NL80211_IFTYPE_STATION; - priv->current_ht_config.smps = IEEE80211_SMPS_STATIC; - priv->missed_beacon_threshold = IWL_MISSED_BEACON_THRESHOLD_DEF; - priv->agg_tids_count = 0; - - priv->ucode_owner = IWL_OWNERSHIP_DRIVER; - - /* initialize force reset */ - priv->force_reset[IWL_RF_RESET].reset_duration = - IWL_DELAY_NEXT_FORCE_RF_RESET; - priv->force_reset[IWL_FW_RESET].reset_duration = - IWL_DELAY_NEXT_FORCE_FW_RELOAD; - - priv->rx_statistics_jiffies = jiffies; - - /* Choose which receivers/antennas to use */ - iwlagn_set_rxon_chain(priv, &priv->contexts[IWL_RXON_CTX_BSS]); - - iwl_init_scan_params(priv); - - /* init bt coex */ - if (cfg(priv)->bt_params && - cfg(priv)->bt_params->advanced_bt_coexist) { - priv->kill_ack_mask = IWLAGN_BT_KILL_ACK_MASK_DEFAULT; - priv->kill_cts_mask = IWLAGN_BT_KILL_CTS_MASK_DEFAULT; - priv->bt_valid = IWLAGN_BT_ALL_VALID_MSK; - priv->bt_on_thresh = BT_ON_THRESHOLD_DEF; - priv->bt_duration = BT_DURATION_LIMIT_DEF; - priv->dynamic_frag_thresh = BT_FRAG_THRESHOLD_DEF; - } - - ret = iwl_init_channel_map(priv); - if (ret) { - IWL_ERR(priv, "initializing regulatory failed: %d\n", ret); - goto err; - } - - ret = iwl_init_geos(priv); - if (ret) { - IWL_ERR(priv, "initializing geos failed: %d\n", ret); - goto err_free_channel_map; - } - iwl_init_hw_rates(priv->ieee_rates); - - return 0; - -err_free_channel_map: - iwl_free_channel_map(priv); -err: - return ret; -} - -static void iwl_uninit_drv(struct iwl_priv *priv) -{ - iwl_free_geos(priv); - iwl_free_channel_map(priv); - kfree(priv->scan_cmd); - kfree(priv->beacon_cmd); - kfree(rcu_dereference_raw(priv->noa_data)); - iwl_calib_free_results(priv); -#ifdef CONFIG_IWLWIFI_DEBUGFS - kfree(priv->wowlan_sram); -#endif -} - -/* Size of one Rx buffer in host DRAM */ -#define IWL_RX_BUF_SIZE_4K (4 * 1024) -#define IWL_RX_BUF_SIZE_8K (8 * 1024) - -static void iwl_set_hw_params(struct iwl_priv *priv) -{ - if (cfg(priv)->ht_params) - hw_params(priv).use_rts_for_aggregation = - cfg(priv)->ht_params->use_rts_for_aggregation; - - if (iwlagn_mod_params.amsdu_size_8K) - hw_params(priv).rx_page_order = - get_order(IWL_RX_BUF_SIZE_8K); - else - hw_params(priv).rx_page_order = - get_order(IWL_RX_BUF_SIZE_4K); - - if (iwlagn_mod_params.disable_11n & IWL_DISABLE_HT_ALL) - hw_params(priv).sku &= ~EEPROM_SKU_CAP_11N_ENABLE; - - hw_params(priv).num_ampdu_queues = - cfg(priv)->base_params->num_of_ampdu_queues; - hw_params(priv).wd_timeout = cfg(priv)->base_params->wd_timeout; - - /* Device-specific setup */ - cfg(priv)->lib->set_hw_params(priv); -} - - - -static void iwl_debug_config(struct iwl_priv *priv) -{ - dev_printk(KERN_INFO, trans(priv)->dev, "CONFIG_IWLWIFI_DEBUG " -#ifdef CONFIG_IWLWIFI_DEBUG - "enabled\n"); -#else - "disabled\n"); -#endif - dev_printk(KERN_INFO, trans(priv)->dev, "CONFIG_IWLWIFI_DEBUGFS " -#ifdef CONFIG_IWLWIFI_DEBUGFS - "enabled\n"); -#else - "disabled\n"); -#endif - dev_printk(KERN_INFO, trans(priv)->dev, "CONFIG_IWLWIFI_DEVICE_TRACING " -#ifdef CONFIG_IWLWIFI_DEVICE_TRACING - "enabled\n"); -#else - "disabled\n"); -#endif - - dev_printk(KERN_INFO, trans(priv)->dev, "CONFIG_IWLWIFI_DEVICE_TESTMODE " -#ifdef CONFIG_IWLWIFI_DEVICE_TESTMODE - "enabled\n"); -#else - "disabled\n"); -#endif - dev_printk(KERN_INFO, trans(priv)->dev, "CONFIG_IWLWIFI_P2P " -#ifdef CONFIG_IWLWIFI_P2P - "enabled\n"); -#else - "disabled\n"); -#endif -} - -static struct iwl_op_mode *iwl_op_mode_dvm_start(struct iwl_trans *trans, - const struct iwl_fw *fw) -{ - int err = 0; - struct iwl_priv *priv; - struct ieee80211_hw *hw; - struct iwl_op_mode *op_mode; - u16 num_mac; - u32 ucode_flags; - struct iwl_trans_config trans_cfg; - static const u8 no_reclaim_cmds[] = { - REPLY_RX_PHY_CMD, - REPLY_RX, - REPLY_RX_MPDU_CMD, - REPLY_COMPRESSED_BA, - STATISTICS_NOTIFICATION, - REPLY_TX, - }; - - /************************ - * 1. Allocating HW data - ************************/ - hw = iwl_alloc_all(); - if (!hw) { - pr_err("%s: Cannot allocate network device\n", - cfg(trans)->name); - err = -ENOMEM; - goto out; - } - - op_mode = hw->priv; - op_mode->ops = &iwl_dvm_ops; - priv = IWL_OP_MODE_GET_DVM(op_mode); - priv->shrd = trans->shrd; - priv->fw = fw; - /* TODO: remove fw from shared data later */ - priv->shrd->fw = fw; - - /* - * Populate the state variables that the transport layer needs - * to know about. - */ - trans_cfg.op_mode = op_mode; - trans_cfg.no_reclaim_cmds = no_reclaim_cmds; - trans_cfg.n_no_reclaim_cmds = ARRAY_SIZE(no_reclaim_cmds); - - ucode_flags = fw->ucode_capa.flags; - -#ifndef CONFIG_IWLWIFI_P2P - ucode_flags &= ~IWL_UCODE_TLV_FLAGS_PAN; -#endif - - if (ucode_flags & IWL_UCODE_TLV_FLAGS_PAN) { - priv->sta_key_max_num = STA_KEY_MAX_NUM_PAN; - trans_cfg.cmd_queue = IWL_IPAN_CMD_QUEUE_NUM; - } else { - priv->sta_key_max_num = STA_KEY_MAX_NUM; - trans_cfg.cmd_queue = IWL_DEFAULT_CMD_QUEUE_NUM; - } - - /* Configure transport layer */ - iwl_trans_configure(trans(priv), &trans_cfg); - - /* At this point both hw and priv are allocated. */ - - SET_IEEE80211_DEV(priv->hw, trans(priv)->dev); - - /* show what debugging capabilities we have */ - iwl_debug_config(priv); - - IWL_DEBUG_INFO(priv, "*** LOAD DRIVER ***\n"); - - /* is antenna coupling more than 35dB ? */ - priv->bt_ant_couple_ok = - (iwlagn_mod_params.ant_coupling > - IWL_BT_ANTENNA_COUPLING_THRESHOLD) ? - true : false; - - /* enable/disable bt channel inhibition */ - priv->bt_ch_announce = iwlagn_mod_params.bt_ch_announce; - IWL_DEBUG_INFO(priv, "BT channel inhibition is %s\n", - (priv->bt_ch_announce) ? "On" : "Off"); - - if (iwl_alloc_traffic_mem(priv)) - IWL_ERR(priv, "Not enough memory to generate traffic log\n"); - - /* these spin locks will be used in apm_ops.init and EEPROM access - * we should init now - */ - spin_lock_init(&trans(priv)->reg_lock); - spin_lock_init(&priv->statistics.lock); - - /*********************** - * 2. Read REV register - ***********************/ - IWL_INFO(priv, "Detected %s, REV=0x%X\n", - cfg(priv)->name, trans(priv)->hw_rev); - - err = iwl_trans_start_hw(trans(priv)); - if (err) - goto out_free_traffic_mem; - - /***************** - * 3. Read EEPROM - *****************/ - err = iwl_eeprom_init(trans(priv), trans(priv)->hw_rev); - /* Reset chip to save power until we load uCode during "up". */ - iwl_trans_stop_hw(trans(priv)); - if (err) { - IWL_ERR(priv, "Unable to init EEPROM\n"); - goto out_free_traffic_mem; - } - err = iwl_eeprom_check_version(priv); - if (err) - goto out_free_eeprom; - - err = iwl_eeprom_init_hw_params(priv); - if (err) - goto out_free_eeprom; - - /* extract MAC Address */ - iwl_eeprom_get_mac(priv->shrd, priv->addresses[0].addr); - IWL_DEBUG_INFO(priv, "MAC address: %pM\n", priv->addresses[0].addr); - priv->hw->wiphy->addresses = priv->addresses; - priv->hw->wiphy->n_addresses = 1; - num_mac = iwl_eeprom_query16(priv->shrd, EEPROM_NUM_MAC_ADDRESS); - if (num_mac > 1) { - memcpy(priv->addresses[1].addr, priv->addresses[0].addr, - ETH_ALEN); - priv->addresses[1].addr[5]++; - priv->hw->wiphy->n_addresses++; - } - - /************************ - * 4. Setup HW constants - ************************/ - iwl_set_hw_params(priv); - - if (!(hw_params(priv).sku & EEPROM_SKU_CAP_IPAN_ENABLE)) { - IWL_DEBUG_INFO(priv, "Your EEPROM disabled PAN"); - ucode_flags &= ~IWL_UCODE_TLV_FLAGS_PAN; - /* - * if not PAN, then don't support P2P -- might be a uCode - * packaging bug or due to the eeprom check above - */ - ucode_flags &= ~IWL_UCODE_TLV_FLAGS_P2P; - priv->sta_key_max_num = STA_KEY_MAX_NUM; - trans_cfg.cmd_queue = IWL_DEFAULT_CMD_QUEUE_NUM; - - /* Configure transport layer again*/ - iwl_trans_configure(trans(priv), &trans_cfg); - } - - /******************* - * 5. Setup priv - *******************/ - - err = iwl_init_drv(priv); - if (err) - goto out_free_eeprom; - /* At this point both hw and priv are initialized. */ - - /******************** - * 6. Setup services - ********************/ - iwl_setup_deferred_work(priv); - iwl_setup_rx_handlers(priv); - iwl_testmode_init(priv); - - iwl_power_initialize(priv); - iwl_tt_initialize(priv); - - snprintf(priv->hw->wiphy->fw_version, - sizeof(priv->hw->wiphy->fw_version), - "%s", fw->fw_version); - - priv->new_scan_threshold_behaviour = - !!(ucode_flags & IWL_UCODE_TLV_FLAGS_NEWSCAN); - - priv->phy_calib_chain_noise_reset_cmd = - fw->ucode_capa.standard_phy_calibration_size; - priv->phy_calib_chain_noise_gain_cmd = - fw->ucode_capa.standard_phy_calibration_size + 1; - - /* initialize all valid contexts */ - iwl_init_context(priv, ucode_flags); - - /************************************************** - * This is still part of probe() in a sense... - * - * 7. Setup and register with mac80211 and debugfs - **************************************************/ - err = iwlagn_mac_setup_register(priv, &fw->ucode_capa); - if (err) - goto out_destroy_workqueue; - - err = iwl_dbgfs_register(priv, DRV_NAME); - if (err) - IWL_ERR(priv, - "failed to create debugfs files. Ignoring error: %d\n", - err); - - return op_mode; - -out_destroy_workqueue: - destroy_workqueue(priv->workqueue); - priv->workqueue = NULL; - iwl_uninit_drv(priv); -out_free_eeprom: - iwl_eeprom_free(priv->shrd); -out_free_traffic_mem: - iwl_free_traffic_mem(priv); - ieee80211_free_hw(priv->hw); -out: - op_mode = NULL; - return op_mode; -} - -static void iwl_op_mode_dvm_stop(struct iwl_op_mode *op_mode) -{ - struct iwl_priv *priv = IWL_OP_MODE_GET_DVM(op_mode); - - IWL_DEBUG_INFO(priv, "*** UNLOAD DRIVER ***\n"); - - iwl_dbgfs_unregister(priv); - - iwl_testmode_cleanup(priv); - iwlagn_mac_unregister(priv); - - iwl_tt_exit(priv); - - /*This will stop the queues, move the device to low power state */ - priv->ucode_loaded = false; - iwl_trans_stop_device(trans(priv)); - - iwl_eeprom_free(priv->shrd); - - /*netif_stop_queue(dev); */ - flush_workqueue(priv->workqueue); - - /* ieee80211_unregister_hw calls iwlagn_mac_stop, which flushes - * priv->workqueue... so we can't take down the workqueue - * until now... */ - destroy_workqueue(priv->workqueue); - priv->workqueue = NULL; - iwl_free_traffic_mem(priv); - - iwl_uninit_drv(priv); - - dev_kfree_skb(priv->beacon_skb); - - ieee80211_free_hw(priv->hw); -} - -static void iwl_cmd_queue_full(struct iwl_op_mode *op_mode) -{ - struct iwl_priv *priv = IWL_OP_MODE_GET_DVM(op_mode); - - if (!iwl_check_for_ct_kill(priv)) { - IWL_ERR(priv, "Restarting adapter queue is full\n"); - iwl_nic_error(op_mode); - } -} - -static void iwl_nic_config(struct iwl_op_mode *op_mode) -{ - struct iwl_priv *priv = IWL_OP_MODE_GET_DVM(op_mode); - - cfg(priv)->lib->nic_config(priv); -} - -static void iwl_stop_sw_queue(struct iwl_op_mode *op_mode, u8 ac) -{ - struct iwl_priv *priv = IWL_OP_MODE_GET_DVM(op_mode); - - set_bit(ac, &priv->transport_queue_stop); - ieee80211_stop_queue(priv->hw, ac); -} - -static void iwl_wake_sw_queue(struct iwl_op_mode *op_mode, u8 ac) -{ - struct iwl_priv *priv = IWL_OP_MODE_GET_DVM(op_mode); - - clear_bit(ac, &priv->transport_queue_stop); - - if (!priv->passive_no_rx) - ieee80211_wake_queue(priv->hw, ac); -} - -void iwlagn_lift_passive_no_rx(struct iwl_priv *priv) -{ - int ac; - - if (!priv->passive_no_rx) - return; - - for (ac = IEEE80211_AC_VO; ac < IEEE80211_NUM_ACS; ac++) { - if (!test_bit(ac, &priv->transport_queue_stop)) { - IWL_DEBUG_TX_QUEUES(priv, "Wake queue %d"); - ieee80211_wake_queue(priv->hw, ac); - } else { - IWL_DEBUG_TX_QUEUES(priv, "Don't wake queue %d"); - } - } - - priv->passive_no_rx = false; -} - -const struct iwl_op_mode_ops iwl_dvm_ops = { - .start = iwl_op_mode_dvm_start, - .stop = iwl_op_mode_dvm_stop, - .rx = iwl_rx_dispatch, - .queue_full = iwl_stop_sw_queue, - .queue_not_full = iwl_wake_sw_queue, - .hw_rf_kill = iwl_set_hw_rfkill_state, - .free_skb = iwl_free_skb, - .nic_error = iwl_nic_error, - .cmd_queue_full = iwl_cmd_queue_full, - .nic_config = iwl_nic_config, -}; - -/***************************************************************************** - * - * driver and module entry point - * - *****************************************************************************/ - -struct kmem_cache *iwl_tx_cmd_pool; - -static int __init iwl_init(void) -{ - - int ret; - pr_info(DRV_DESCRIPTION ", " DRV_VERSION "\n"); - pr_info(DRV_COPYRIGHT "\n"); - - iwl_tx_cmd_pool = kmem_cache_create("iwl_dev_cmd", - sizeof(struct iwl_device_cmd), - sizeof(void *), 0, NULL); - if (!iwl_tx_cmd_pool) - return -ENOMEM; - - ret = iwlagn_rate_control_register(); - if (ret) { - pr_err("Unable to register rate control algorithm: %d\n", ret); - goto error_rc_register; - } - - ret = iwl_pci_register_driver(); - if (ret) - goto error_pci_register; - return ret; - -error_pci_register: - iwlagn_rate_control_unregister(); -error_rc_register: - kmem_cache_destroy(iwl_tx_cmd_pool); - return ret; -} - -static void __exit iwl_exit(void) -{ - iwl_pci_unregister_driver(); - iwlagn_rate_control_unregister(); - kmem_cache_destroy(iwl_tx_cmd_pool); -} - -module_exit(iwl_exit); -module_init(iwl_init); - -#ifdef CONFIG_IWLWIFI_DEBUG -module_param_named(debug, iwlagn_mod_params.debug_level, uint, - S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(debug, "debug output mask"); -#endif - -module_param_named(swcrypto, iwlagn_mod_params.sw_crypto, int, S_IRUGO); -MODULE_PARM_DESC(swcrypto, "using crypto in software (default 0 [hardware])"); -module_param_named(11n_disable, iwlagn_mod_params.disable_11n, uint, S_IRUGO); -MODULE_PARM_DESC(11n_disable, - "disable 11n functionality, bitmap: 1: full, 2: agg TX, 4: agg RX"); -module_param_named(amsdu_size_8K, iwlagn_mod_params.amsdu_size_8K, - int, S_IRUGO); -MODULE_PARM_DESC(amsdu_size_8K, "enable 8K amsdu size"); -module_param_named(fw_restart, iwlagn_mod_params.restart_fw, int, S_IRUGO); -MODULE_PARM_DESC(fw_restart, "restart firmware in case of error"); - -module_param_named(ucode_alternative, - iwlagn_mod_params.wanted_ucode_alternative, - int, S_IRUGO); -MODULE_PARM_DESC(ucode_alternative, - "specify ucode alternative to use from ucode file"); - -module_param_named(antenna_coupling, iwlagn_mod_params.ant_coupling, - int, S_IRUGO); -MODULE_PARM_DESC(antenna_coupling, - "specify antenna coupling in dB (defualt: 0 dB)"); - -module_param_named(bt_ch_inhibition, iwlagn_mod_params.bt_ch_announce, - bool, S_IRUGO); -MODULE_PARM_DESC(bt_ch_inhibition, - "Enable BT channel inhibition (default: enable)"); - -module_param_named(plcp_check, iwlagn_mod_params.plcp_check, bool, S_IRUGO); -MODULE_PARM_DESC(plcp_check, "Check plcp health (default: 1 [enabled])"); - -module_param_named(ack_check, iwlagn_mod_params.ack_check, bool, S_IRUGO); -MODULE_PARM_DESC(ack_check, "Check ack health (default: 0 [disabled])"); - -module_param_named(wd_disable, iwlagn_mod_params.wd_disable, int, S_IRUGO); -MODULE_PARM_DESC(wd_disable, - "Disable stuck queue watchdog timer 0=system default, " - "1=disable, 2=enable (default: 0)"); - -/* - * set bt_coex_active to true, uCode will do kill/defer - * every time the priority line is asserted (BT is sending signals on the - * priority line in the PCIx). - * set bt_coex_active to false, uCode will ignore the BT activity and - * perform the normal operation - * - * User might experience transmit issue on some platform due to WiFi/BT - * co-exist problem. The possible behaviors are: - * Able to scan and finding all the available AP - * Not able to associate with any AP - * On those platforms, WiFi communication can be restored by set - * "bt_coex_active" module parameter to "false" - * - * default: bt_coex_active = true (BT_COEX_ENABLE) - */ -module_param_named(bt_coex_active, iwlagn_mod_params.bt_coex_active, - bool, S_IRUGO); -MODULE_PARM_DESC(bt_coex_active, "enable wifi/bt co-exist (default: enable)"); - -module_param_named(led_mode, iwlagn_mod_params.led_mode, int, S_IRUGO); -MODULE_PARM_DESC(led_mode, "0=system default, " - "1=On(RF On)/Off(RF Off), 2=blinking, 3=Off (default: 0)"); - -module_param_named(power_save, iwlagn_mod_params.power_save, - bool, S_IRUGO); -MODULE_PARM_DESC(power_save, - "enable WiFi power management (default: disable)"); - -module_param_named(power_level, iwlagn_mod_params.power_level, - int, S_IRUGO); -MODULE_PARM_DESC(power_level, - "default power save level (range from 1 - 5, default: 1)"); - -module_param_named(auto_agg, iwlagn_mod_params.auto_agg, - bool, S_IRUGO); -MODULE_PARM_DESC(auto_agg, - "enable agg w/o check traffic load (default: enable)"); - -/* - * For now, keep using power level 1 instead of automatically - * adjusting ... - */ -module_param_named(no_sleep_autoadjust, iwlagn_mod_params.no_sleep_autoadjust, - bool, S_IRUGO); -MODULE_PARM_DESC(no_sleep_autoadjust, - "don't automatically adjust sleep level " - "according to maximum network latency (default: true)"); |