diff options
Diffstat (limited to 'ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-1000.c')
| -rw-r--r-- | ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-1000.c | 230 |
1 files changed, 0 insertions, 230 deletions
diff --git a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-1000.c b/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-1000.c deleted file mode 100644 index 8d80e233..00000000 --- a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-1000.c +++ /dev/null @@ -1,230 +0,0 @@ -/****************************************************************************** - * - * Copyright(c) 2008 - 2012 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA - * - * The full GNU General Public License is included in this distribution in the - * file called LICENSE. - * - * Contact Information: - * Intel Linux Wireless <ilw@linux.intel.com> - * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - * - *****************************************************************************/ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/delay.h> -#include <linux/skbuff.h> -#include <linux/netdevice.h> -#include <net/mac80211.h> -#include <linux/etherdevice.h> -#include <asm/unaligned.h> -#include <linux/stringify.h> - -#include "iwl-eeprom.h" -#include "iwl-dev.h" -#include "iwl-core.h" -#include "iwl-io.h" -#include "iwl-agn.h" -#include "iwl-agn-hw.h" -#include "iwl-shared.h" -#include "iwl-cfg.h" -#include "iwl-prph.h" - -/* Highest firmware API version supported */ -#define IWL1000_UCODE_API_MAX 5 -#define IWL100_UCODE_API_MAX 5 - -/* Oldest version we won't warn about */ -#define IWL1000_UCODE_API_OK 5 -#define IWL100_UCODE_API_OK 5 - -/* Lowest firmware API version supported */ -#define IWL1000_UCODE_API_MIN 1 -#define IWL100_UCODE_API_MIN 5 - -#define IWL1000_FW_PRE "iwlwifi-1000-" -#define IWL1000_MODULE_FIRMWARE(api) IWL1000_FW_PRE __stringify(api) ".ucode" - -#define IWL100_FW_PRE "iwlwifi-100-" -#define IWL100_MODULE_FIRMWARE(api) IWL100_FW_PRE __stringify(api) ".ucode" - - -/* - * For 1000, use advance thermal throttling critical temperature threshold, - * but legacy thermal management implementation for now. - * This is for the reason of 1000 uCode using advance thermal throttling API - * but not implement ct_kill_exit based on ct_kill exit temperature - * so the thermal throttling will still based on legacy thermal throttling - * management. - * The code here need to be modified once 1000 uCode has the advanced thermal - * throttling algorithm in place - */ -static void iwl1000_set_ct_threshold(struct iwl_priv *priv) -{ - /* want Celsius */ - hw_params(priv).ct_kill_threshold = CT_KILL_THRESHOLD_LEGACY; - hw_params(priv).ct_kill_exit_threshold = CT_KILL_EXIT_THRESHOLD; -} - -/* NIC configuration for 1000 series */ -static void iwl1000_nic_config(struct iwl_priv *priv) -{ - /* set CSR_HW_CONFIG_REG for uCode use */ - iwl_set_bit(trans(priv), CSR_HW_IF_CONFIG_REG, - CSR_HW_IF_CONFIG_REG_BIT_RADIO_SI | - CSR_HW_IF_CONFIG_REG_BIT_MAC_SI); - - /* Setting digital SVR for 1000 card to 1.32V */ - /* locking is acquired in iwl_set_bits_mask_prph() function */ - iwl_set_bits_mask_prph(trans(priv), APMG_DIGITAL_SVR_REG, - APMG_SVR_DIGITAL_VOLTAGE_1_32, - ~APMG_SVR_VOLTAGE_CONFIG_BIT_MSK); -} - -static const struct iwl_sensitivity_ranges iwl1000_sensitivity = { - .min_nrg_cck = 95, - .auto_corr_min_ofdm = 90, - .auto_corr_min_ofdm_mrc = 170, - .auto_corr_min_ofdm_x1 = 120, - .auto_corr_min_ofdm_mrc_x1 = 240, - - .auto_corr_max_ofdm = 120, - .auto_corr_max_ofdm_mrc = 210, - .auto_corr_max_ofdm_x1 = 155, - .auto_corr_max_ofdm_mrc_x1 = 290, - - .auto_corr_min_cck = 125, - .auto_corr_max_cck = 200, - .auto_corr_min_cck_mrc = 170, - .auto_corr_max_cck_mrc = 400, - .nrg_th_cck = 95, - .nrg_th_ofdm = 95, - - .barker_corr_th_min = 190, - .barker_corr_th_min_mrc = 390, - .nrg_th_cca = 62, -}; - -static void iwl1000_hw_set_hw_params(struct iwl_priv *priv) -{ - hw_params(priv).ht40_channel = BIT(IEEE80211_BAND_2GHZ); - - hw_params(priv).tx_chains_num = - num_of_ant(hw_params(priv).valid_tx_ant); - if (cfg(priv)->rx_with_siso_diversity) - hw_params(priv).rx_chains_num = 1; - else - hw_params(priv).rx_chains_num = - num_of_ant(hw_params(priv).valid_rx_ant); - - iwl1000_set_ct_threshold(priv); - - /* Set initial sensitivity parameters */ - hw_params(priv).sens = &iwl1000_sensitivity; -} - -static struct iwl_lib_ops iwl1000_lib = { - .set_hw_params = iwl1000_hw_set_hw_params, - .nic_config = iwl1000_nic_config, - .eeprom_ops = { - .regulatory_bands = { - EEPROM_REG_BAND_1_CHANNELS, - EEPROM_REG_BAND_2_CHANNELS, - EEPROM_REG_BAND_3_CHANNELS, - EEPROM_REG_BAND_4_CHANNELS, - EEPROM_REG_BAND_5_CHANNELS, - EEPROM_REG_BAND_24_HT40_CHANNELS, - EEPROM_REGULATORY_BAND_NO_HT40, - }, - }, - .temperature = iwlagn_temperature, -}; - -static const struct iwl_base_params iwl1000_base_params = { - .num_of_queues = IWLAGN_NUM_QUEUES, - .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES, - .eeprom_size = OTP_LOW_IMAGE_SIZE, - .pll_cfg_val = CSR50_ANA_PLL_CFG_VAL, - .max_ll_items = OTP_MAX_LL_ITEMS_1000, - .shadow_ram_support = false, - .led_compensation = 51, - .support_ct_kill_exit = true, - .plcp_delta_threshold = IWL_MAX_PLCP_ERR_EXT_LONG_THRESHOLD_DEF, - .chain_noise_scale = 1000, - .wd_timeout = IWL_DEF_WD_TIMEOUT, - .max_event_log_size = 128, - .wd_disable = true, -}; - -static const struct iwl_ht_params iwl1000_ht_params = { - .ht_greenfield_support = true, - .use_rts_for_aggregation = true, /* use rts/cts protection */ - .smps_mode = IEEE80211_SMPS_DYNAMIC, -}; - -#define IWL_DEVICE_1000 \ - .fw_name_pre = IWL1000_FW_PRE, \ - .ucode_api_max = IWL1000_UCODE_API_MAX, \ - .ucode_api_ok = IWL1000_UCODE_API_OK, \ - .ucode_api_min = IWL1000_UCODE_API_MIN, \ - .max_inst_size = IWLAGN_RTC_INST_SIZE, \ - .max_data_size = IWLAGN_RTC_DATA_SIZE, \ - .eeprom_ver = EEPROM_1000_EEPROM_VERSION, \ - .eeprom_calib_ver = EEPROM_1000_TX_POWER_VERSION, \ - .lib = &iwl1000_lib, \ - .base_params = &iwl1000_base_params, \ - .led_mode = IWL_LED_BLINK - -const struct iwl_cfg iwl1000_bgn_cfg = { - .name = "Intel(R) Centrino(R) Wireless-N 1000 BGN", - IWL_DEVICE_1000, - .ht_params = &iwl1000_ht_params, -}; - -const struct iwl_cfg iwl1000_bg_cfg = { - .name = "Intel(R) Centrino(R) Wireless-N 1000 BG", - IWL_DEVICE_1000, -}; - -#define IWL_DEVICE_100 \ - .fw_name_pre = IWL100_FW_PRE, \ - .ucode_api_max = IWL100_UCODE_API_MAX, \ - .ucode_api_ok = IWL100_UCODE_API_OK, \ - .ucode_api_min = IWL100_UCODE_API_MIN, \ - .max_inst_size = IWLAGN_RTC_INST_SIZE, \ - .max_data_size = IWLAGN_RTC_DATA_SIZE, \ - .eeprom_ver = EEPROM_1000_EEPROM_VERSION, \ - .eeprom_calib_ver = EEPROM_1000_TX_POWER_VERSION, \ - .lib = &iwl1000_lib, \ - .base_params = &iwl1000_base_params, \ - .led_mode = IWL_LED_RF_STATE, \ - .rx_with_siso_diversity = true - -const struct iwl_cfg iwl100_bgn_cfg = { - .name = "Intel(R) Centrino(R) Wireless-N 100 BGN", - IWL_DEVICE_100, - .ht_params = &iwl1000_ht_params, -}; - -const struct iwl_cfg iwl100_bg_cfg = { - .name = "Intel(R) Centrino(R) Wireless-N 100 BG", - IWL_DEVICE_100, -}; - -MODULE_FIRMWARE(IWL1000_MODULE_FIRMWARE(IWL1000_UCODE_API_OK)); -MODULE_FIRMWARE(IWL100_MODULE_FIRMWARE(IWL100_UCODE_API_OK)); |