diff options
Diffstat (limited to 'ANDROID_3.4.5/drivers/net/usb/cdc_ether.c')
| -rw-r--r-- | ANDROID_3.4.5/drivers/net/usb/cdc_ether.c | 660 |
1 files changed, 0 insertions, 660 deletions
diff --git a/ANDROID_3.4.5/drivers/net/usb/cdc_ether.c b/ANDROID_3.4.5/drivers/net/usb/cdc_ether.c deleted file mode 100644 index 202af629..00000000 --- a/ANDROID_3.4.5/drivers/net/usb/cdc_ether.c +++ /dev/null @@ -1,660 +0,0 @@ -/* - * CDC Ethernet based networking peripherals - * Copyright (C) 2003-2005 by David Brownell - * Copyright (C) 2006 by Ole Andre Vadla Ravnas (ActiveSync) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -// #define DEBUG // error path messages, extra info -// #define VERBOSE // more; success messages - -#include <linux/module.h> -#include <linux/init.h> -#include <linux/netdevice.h> -#include <linux/etherdevice.h> -#include <linux/ethtool.h> -#include <linux/workqueue.h> -#include <linux/mii.h> -#include <linux/usb.h> -#include <linux/usb/cdc.h> -#include <linux/usb/usbnet.h> - - -#if defined(CONFIG_USB_NET_RNDIS_HOST) || defined(CONFIG_USB_NET_RNDIS_HOST_MODULE) - -static int is_rndis(struct usb_interface_descriptor *desc) -{ - return (desc->bInterfaceClass == USB_CLASS_COMM && - desc->bInterfaceSubClass == 2 && - desc->bInterfaceProtocol == 0xff); -} - -static int is_activesync(struct usb_interface_descriptor *desc) -{ - return (desc->bInterfaceClass == USB_CLASS_MISC && - desc->bInterfaceSubClass == 1 && - desc->bInterfaceProtocol == 1); -} - -static int is_wireless_rndis(struct usb_interface_descriptor *desc) -{ - return (desc->bInterfaceClass == USB_CLASS_WIRELESS_CONTROLLER && - desc->bInterfaceSubClass == 1 && - desc->bInterfaceProtocol == 3); -} - -#else - -#define is_rndis(desc) 0 -#define is_activesync(desc) 0 -#define is_wireless_rndis(desc) 0 - -#endif - -static const u8 mbm_guid[16] = { - 0xa3, 0x17, 0xa8, 0x8b, 0x04, 0x5e, 0x4f, 0x01, - 0xa6, 0x07, 0xc0, 0xff, 0xcb, 0x7e, 0x39, 0x2a, -}; - -/* - * probes control interface, claims data interface, collects the bulk - * endpoints, activates data interface (if needed), maybe sets MTU. - * all pure cdc, except for certain firmware workarounds, and knowing - * that rndis uses one different rule. - */ -int usbnet_generic_cdc_bind(struct usbnet *dev, struct usb_interface *intf) -{ - u8 *buf = intf->cur_altsetting->extra; - int len = intf->cur_altsetting->extralen; - struct usb_interface_descriptor *d; - struct cdc_state *info = (void *) &dev->data; - int status; - int rndis; - bool android_rndis_quirk = false; - struct usb_driver *driver = driver_of(intf); - struct usb_cdc_mdlm_desc *desc = NULL; - struct usb_cdc_mdlm_detail_desc *detail = NULL; - - if (sizeof dev->data < sizeof *info) - return -EDOM; - - /* expect strict spec conformance for the descriptors, but - * cope with firmware which stores them in the wrong place - */ - if (len == 0 && dev->udev->actconfig->extralen) { - /* Motorola SB4100 (and others: Brad Hards says it's - * from a Broadcom design) put CDC descriptors here - */ - buf = dev->udev->actconfig->extra; - len = dev->udev->actconfig->extralen; - dev_dbg(&intf->dev, "CDC descriptors on config\n"); - } - - /* Maybe CDC descriptors are after the endpoint? This bug has - * been seen on some 2Wire Inc RNDIS-ish products. - */ - if (len == 0) { - struct usb_host_endpoint *hep; - - hep = intf->cur_altsetting->endpoint; - if (hep) { - buf = hep->extra; - len = hep->extralen; - } - if (len) - dev_dbg(&intf->dev, - "CDC descriptors on endpoint\n"); - } - - /* this assumes that if there's a non-RNDIS vendor variant - * of cdc-acm, it'll fail RNDIS requests cleanly. - */ - rndis = (is_rndis(&intf->cur_altsetting->desc) || - is_activesync(&intf->cur_altsetting->desc) || - is_wireless_rndis(&intf->cur_altsetting->desc)); - - memset(info, 0, sizeof *info); - info->control = intf; - while (len > 3) { - if (buf [1] != USB_DT_CS_INTERFACE) - goto next_desc; - - /* use bDescriptorSubType to identify the CDC descriptors. - * We expect devices with CDC header and union descriptors. - * For CDC Ethernet we need the ethernet descriptor. - * For RNDIS, ignore two (pointless) CDC modem descriptors - * in favor of a complicated OID-based RPC scheme doing what - * CDC Ethernet achieves with a simple descriptor. - */ - switch (buf [2]) { - case USB_CDC_HEADER_TYPE: - if (info->header) { - dev_dbg(&intf->dev, "extra CDC header\n"); - goto bad_desc; - } - info->header = (void *) buf; - if (info->header->bLength != sizeof *info->header) { - dev_dbg(&intf->dev, "CDC header len %u\n", - info->header->bLength); - goto bad_desc; - } - break; - case USB_CDC_ACM_TYPE: - /* paranoia: disambiguate a "real" vendor-specific - * modem interface from an RNDIS non-modem. - */ - if (rndis) { - struct usb_cdc_acm_descriptor *acm; - - acm = (void *) buf; - if (acm->bmCapabilities) { - dev_dbg(&intf->dev, - "ACM capabilities %02x, " - "not really RNDIS?\n", - acm->bmCapabilities); - goto bad_desc; - } - } - break; - case USB_CDC_UNION_TYPE: - if (info->u) { - dev_dbg(&intf->dev, "extra CDC union\n"); - goto bad_desc; - } - info->u = (void *) buf; - if (info->u->bLength != sizeof *info->u) { - dev_dbg(&intf->dev, "CDC union len %u\n", - info->u->bLength); - goto bad_desc; - } - - /* we need a master/control interface (what we're - * probed with) and a slave/data interface; union - * descriptors sort this all out. - */ - info->control = usb_ifnum_to_if(dev->udev, - info->u->bMasterInterface0); - info->data = usb_ifnum_to_if(dev->udev, - info->u->bSlaveInterface0); - if (!info->control || !info->data) { - dev_dbg(&intf->dev, - "master #%u/%p slave #%u/%p\n", - info->u->bMasterInterface0, - info->control, - info->u->bSlaveInterface0, - info->data); - /* fall back to hard-wiring for RNDIS */ - if (rndis) { - android_rndis_quirk = true; - goto next_desc; - } - goto bad_desc; - } - if (info->control != intf) { - dev_dbg(&intf->dev, "bogus CDC Union\n"); - /* Ambit USB Cable Modem (and maybe others) - * interchanges master and slave interface. - */ - if (info->data == intf) { - info->data = info->control; - info->control = intf; - } else - goto bad_desc; - } - - /* a data interface altsetting does the real i/o */ - d = &info->data->cur_altsetting->desc; - if (d->bInterfaceClass != USB_CLASS_CDC_DATA) { - dev_dbg(&intf->dev, "slave class %u\n", - d->bInterfaceClass); - goto bad_desc; - } - break; - case USB_CDC_ETHERNET_TYPE: - if (info->ether) { - dev_dbg(&intf->dev, "extra CDC ether\n"); - goto bad_desc; - } - info->ether = (void *) buf; - if (info->ether->bLength != sizeof *info->ether) { - dev_dbg(&intf->dev, "CDC ether len %u\n", - info->ether->bLength); - goto bad_desc; - } - dev->hard_mtu = le16_to_cpu( - info->ether->wMaxSegmentSize); - /* because of Zaurus, we may be ignoring the host - * side link address we were given. - */ - break; - case USB_CDC_MDLM_TYPE: - if (desc) { - dev_dbg(&intf->dev, "extra MDLM descriptor\n"); - goto bad_desc; - } - - desc = (void *)buf; - - if (desc->bLength != sizeof(*desc)) - goto bad_desc; - - if (memcmp(&desc->bGUID, mbm_guid, 16)) - goto bad_desc; - break; - case USB_CDC_MDLM_DETAIL_TYPE: - if (detail) { - dev_dbg(&intf->dev, "extra MDLM detail descriptor\n"); - goto bad_desc; - } - - detail = (void *)buf; - - if (detail->bGuidDescriptorType == 0) { - if (detail->bLength < (sizeof(*detail) + 1)) - goto bad_desc; - } else - goto bad_desc; - break; - } -next_desc: - len -= buf [0]; /* bLength */ - buf += buf [0]; - } - - /* Microsoft ActiveSync based and some regular RNDIS devices lack the - * CDC descriptors, so we'll hard-wire the interfaces and not check - * for descriptors. - * - * Some Android RNDIS devices have a CDC Union descriptor pointing - * to non-existing interfaces. Ignore that and attempt the same - * hard-wired 0 and 1 interfaces. - */ - if (rndis && (!info->u || android_rndis_quirk)) { - info->control = usb_ifnum_to_if(dev->udev, 0); - info->data = usb_ifnum_to_if(dev->udev, 1); - if (!info->control || !info->data || info->control != intf) { - dev_dbg(&intf->dev, - "rndis: master #0/%p slave #1/%p\n", - info->control, - info->data); - goto bad_desc; - } - - } else if (!info->header || !info->u || (!rndis && !info->ether)) { - dev_dbg(&intf->dev, "missing cdc %s%s%sdescriptor\n", - info->header ? "" : "header ", - info->u ? "" : "union ", - info->ether ? "" : "ether "); - goto bad_desc; - } - - /* claim data interface and set it up ... with side effects. - * network traffic can't flow until an altsetting is enabled. - */ - status = usb_driver_claim_interface(driver, info->data, dev); - if (status < 0) - return status; - status = usbnet_get_endpoints(dev, info->data); - if (status < 0) { - /* ensure immediate exit from usbnet_disconnect */ - usb_set_intfdata(info->data, NULL); - usb_driver_release_interface(driver, info->data); - return status; - } - - /* status endpoint: optional for CDC Ethernet, not RNDIS (or ACM) */ - dev->status = NULL; - if (info->control->cur_altsetting->desc.bNumEndpoints == 1) { - struct usb_endpoint_descriptor *desc; - - dev->status = &info->control->cur_altsetting->endpoint [0]; - desc = &dev->status->desc; - if (!usb_endpoint_is_int_in(desc) || - (le16_to_cpu(desc->wMaxPacketSize) - < sizeof(struct usb_cdc_notification)) || - !desc->bInterval) { - dev_dbg(&intf->dev, "bad notification endpoint\n"); - dev->status = NULL; - } - } - if (rndis && !dev->status) { - dev_dbg(&intf->dev, "missing RNDIS status endpoint\n"); - usb_set_intfdata(info->data, NULL); - usb_driver_release_interface(driver, info->data); - return -ENODEV; - } - return 0; - -bad_desc: - dev_info(&dev->udev->dev, "bad CDC descriptors\n"); - return -ENODEV; -} -EXPORT_SYMBOL_GPL(usbnet_generic_cdc_bind); - -void usbnet_cdc_unbind(struct usbnet *dev, struct usb_interface *intf) -{ - struct cdc_state *info = (void *) &dev->data; - struct usb_driver *driver = driver_of(intf); - - /* disconnect master --> disconnect slave */ - if (intf == info->control && info->data) { - /* ensure immediate exit from usbnet_disconnect */ - usb_set_intfdata(info->data, NULL); - usb_driver_release_interface(driver, info->data); - info->data = NULL; - } - - /* and vice versa (just in case) */ - else if (intf == info->data && info->control) { - /* ensure immediate exit from usbnet_disconnect */ - usb_set_intfdata(info->control, NULL); - usb_driver_release_interface(driver, info->control); - info->control = NULL; - } -} -EXPORT_SYMBOL_GPL(usbnet_cdc_unbind); - -/*------------------------------------------------------------------------- - * - * Communications Device Class, Ethernet Control model - * - * Takes two interfaces. The DATA interface is inactive till an altsetting - * is selected. Configuration data includes class descriptors. There's - * an optional status endpoint on the control interface. - * - * This should interop with whatever the 2.4 "CDCEther.c" driver - * (by Brad Hards) talked with, with more functionality. - * - *-------------------------------------------------------------------------*/ - -static void dumpspeed(struct usbnet *dev, __le32 *speeds) -{ - netif_info(dev, timer, dev->net, - "link speeds: %u kbps up, %u kbps down\n", - __le32_to_cpu(speeds[0]) / 1000, - __le32_to_cpu(speeds[1]) / 1000); -} - -void usbnet_cdc_status(struct usbnet *dev, struct urb *urb) -{ - struct usb_cdc_notification *event; - - if (urb->actual_length < sizeof *event) - return; - - /* SPEED_CHANGE can get split into two 8-byte packets */ - if (test_and_clear_bit(EVENT_STS_SPLIT, &dev->flags)) { - dumpspeed(dev, (__le32 *) urb->transfer_buffer); - return; - } - - event = urb->transfer_buffer; - switch (event->bNotificationType) { - case USB_CDC_NOTIFY_NETWORK_CONNECTION: - netif_dbg(dev, timer, dev->net, "CDC: carrier %s\n", - event->wValue ? "on" : "off"); - if (event->wValue) - netif_carrier_on(dev->net); - else - netif_carrier_off(dev->net); - break; - case USB_CDC_NOTIFY_SPEED_CHANGE: /* tx/rx rates */ - netif_dbg(dev, timer, dev->net, "CDC: speed change (len %d)\n", - urb->actual_length); - if (urb->actual_length != (sizeof *event + 8)) - set_bit(EVENT_STS_SPLIT, &dev->flags); - else - dumpspeed(dev, (__le32 *) &event[1]); - break; - /* USB_CDC_NOTIFY_RESPONSE_AVAILABLE can happen too (e.g. RNDIS), - * but there are no standard formats for the response data. - */ - default: - netdev_err(dev->net, "CDC: unexpected notification %02x!\n", - event->bNotificationType); - break; - } -} -EXPORT_SYMBOL_GPL(usbnet_cdc_status); -void check_set_mac(unsigned char *buf); -int usbnet_cdc_bind(struct usbnet *dev, struct usb_interface *intf) -{ - int status; - struct cdc_state *info = (void *) &dev->data; - - BUILD_BUG_ON((sizeof(((struct usbnet *)0)->data) - < sizeof(struct cdc_state))); - - status = usbnet_generic_cdc_bind(dev, intf); - if (status < 0) - return status; - - status = usbnet_get_ethernet_addr(dev, info->ether->iMACAddress); - check_set_mac(dev->net->dev_addr); - if (status < 0) { - usb_set_intfdata(info->data, NULL); - usb_driver_release_interface(driver_of(intf), info->data); - return status; - } - - /* FIXME cdc-ether has some multicast code too, though it complains - * in routine cases. info->ether describes the multicast support. - * Implement that here, manipulating the cdc filter as needed. - */ - return 0; -} -EXPORT_SYMBOL_GPL(usbnet_cdc_bind); - -static int cdc_manage_power(struct usbnet *dev, int on) -{ - dev->intf->needs_remote_wakeup = on; - return 0; -} - -static const struct driver_info cdc_info = { - .description = "CDC Ethernet Device", - .flags = FLAG_ETHER | FLAG_POINTTOPOINT, - // .check_connect = cdc_check_connect, - .bind = usbnet_cdc_bind, - .unbind = usbnet_cdc_unbind, - .status = usbnet_cdc_status, - .manage_power = cdc_manage_power, -}; - -static const struct driver_info wwan_info = { - .description = "Mobile Broadband Network Device", - .flags = FLAG_WWAN, - .bind = usbnet_cdc_bind, - .unbind = usbnet_cdc_unbind, - .status = usbnet_cdc_status, - .manage_power = cdc_manage_power, -}; - -/*-------------------------------------------------------------------------*/ - -#define HUAWEI_VENDOR_ID 0x12D1 -#define NOVATEL_VENDOR_ID 0x1410 - -static const struct usb_device_id products [] = { -/* - * BLACKLIST !! - * - * First blacklist any products that are egregiously nonconformant - * with the CDC Ethernet specs. Minor braindamage we cope with; when - * they're not even trying, needing a separate driver is only the first - * of the differences to show up. - */ - -#define ZAURUS_MASTER_INTERFACE \ - .bInterfaceClass = USB_CLASS_COMM, \ - .bInterfaceSubClass = USB_CDC_SUBCLASS_ETHERNET, \ - .bInterfaceProtocol = USB_CDC_PROTO_NONE - -/* SA-1100 based Sharp Zaurus ("collie"), or compatible; - * wire-incompatible with true CDC Ethernet implementations. - * (And, it seems, needlessly so...) - */ -{ - .match_flags = USB_DEVICE_ID_MATCH_INT_INFO - | USB_DEVICE_ID_MATCH_DEVICE, - .idVendor = 0x04DD, - .idProduct = 0x8004, - ZAURUS_MASTER_INTERFACE, - .driver_info = 0, -}, - -/* PXA-25x based Sharp Zaurii. Note that it seems some of these - * (later models especially) may have shipped only with firmware - * advertising false "CDC MDLM" compatibility ... but we're not - * clear which models did that, so for now let's assume the worst. - */ -{ - .match_flags = USB_DEVICE_ID_MATCH_INT_INFO - | USB_DEVICE_ID_MATCH_DEVICE, - .idVendor = 0x04DD, - .idProduct = 0x8005, /* A-300 */ - ZAURUS_MASTER_INTERFACE, - .driver_info = 0, -}, { - .match_flags = USB_DEVICE_ID_MATCH_INT_INFO - | USB_DEVICE_ID_MATCH_DEVICE, - .idVendor = 0x04DD, - .idProduct = 0x8006, /* B-500/SL-5600 */ - ZAURUS_MASTER_INTERFACE, - .driver_info = 0, -}, { - .match_flags = USB_DEVICE_ID_MATCH_INT_INFO - | USB_DEVICE_ID_MATCH_DEVICE, - .idVendor = 0x04DD, - .idProduct = 0x8007, /* C-700 */ - ZAURUS_MASTER_INTERFACE, - .driver_info = 0, -}, { - .match_flags = USB_DEVICE_ID_MATCH_INT_INFO - | USB_DEVICE_ID_MATCH_DEVICE, - .idVendor = 0x04DD, - .idProduct = 0x9031, /* C-750 C-760 */ - ZAURUS_MASTER_INTERFACE, - .driver_info = 0, -}, { - .match_flags = USB_DEVICE_ID_MATCH_INT_INFO - | USB_DEVICE_ID_MATCH_DEVICE, - .idVendor = 0x04DD, - .idProduct = 0x9032, /* SL-6000 */ - ZAURUS_MASTER_INTERFACE, - .driver_info = 0, -}, { - .match_flags = USB_DEVICE_ID_MATCH_INT_INFO - | USB_DEVICE_ID_MATCH_DEVICE, - .idVendor = 0x04DD, - /* reported with some C860 units */ - .idProduct = 0x9050, /* C-860 */ - ZAURUS_MASTER_INTERFACE, - .driver_info = 0, -}, - -/* Olympus has some models with a Zaurus-compatible option. - * R-1000 uses a FreeScale i.MXL cpu (ARMv4T) - */ -{ - .match_flags = USB_DEVICE_ID_MATCH_INT_INFO - | USB_DEVICE_ID_MATCH_DEVICE, - .idVendor = 0x07B4, - .idProduct = 0x0F02, /* R-1000 */ - ZAURUS_MASTER_INTERFACE, - .driver_info = 0, -}, - -/* LG Electronics VL600 wants additional headers on every frame */ -{ - USB_DEVICE_AND_INTERFACE_INFO(0x1004, 0x61aa, USB_CLASS_COMM, - USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE), - .driver_info = 0, -}, - -/* Logitech Harmony 900 - uses the pseudo-MDLM (BLAN) driver */ -{ - USB_DEVICE_AND_INTERFACE_INFO(0x046d, 0xc11f, USB_CLASS_COMM, - USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE), - .driver_info = 0, -}, - -/* - * WHITELIST!!! - * - * CDC Ether uses two interfaces, not necessarily consecutive. - * We match the main interface, ignoring the optional device - * class so we could handle devices that aren't exclusively - * CDC ether. - * - * NOTE: this match must come AFTER entries blacklisting devices - * because of bugs/quirks in a given product (like Zaurus, above). - */ -{ - /* Novatel USB551L */ - /* This match must come *before* the generic CDC-ETHER match so that - * we get FLAG_WWAN set on the device, since it's descriptors are - * generic CDC-ETHER. - */ - .match_flags = USB_DEVICE_ID_MATCH_VENDOR - | USB_DEVICE_ID_MATCH_PRODUCT - | USB_DEVICE_ID_MATCH_INT_INFO, - .idVendor = NOVATEL_VENDOR_ID, - .idProduct = 0xB001, - .bInterfaceClass = USB_CLASS_COMM, - .bInterfaceSubClass = USB_CDC_SUBCLASS_ETHERNET, - .bInterfaceProtocol = USB_CDC_PROTO_NONE, - .driver_info = (unsigned long)&wwan_info, -}, { - USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ETHERNET, - USB_CDC_PROTO_NONE), - .driver_info = (unsigned long) &cdc_info, -}, { - USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_MDLM, - USB_CDC_PROTO_NONE), - .driver_info = (unsigned long)&wwan_info, - -}, { - /* Various Huawei modems with a network port like the UMG1831 */ - .match_flags = USB_DEVICE_ID_MATCH_VENDOR - | USB_DEVICE_ID_MATCH_INT_INFO, - .idVendor = HUAWEI_VENDOR_ID, - .bInterfaceClass = USB_CLASS_COMM, - .bInterfaceSubClass = USB_CDC_SUBCLASS_ETHERNET, - .bInterfaceProtocol = 255, - .driver_info = (unsigned long)&wwan_info, -}, - { }, // END -}; -MODULE_DEVICE_TABLE(usb, products); - -struct usb_driver cdc_driver = { - .name = "cdc_ether", - .id_table = products, - .probe = usbnet_probe, - .disconnect = usbnet_disconnect, - .suspend = usbnet_suspend, - .resume = usbnet_resume, - .reset_resume = usbnet_resume, - .supports_autosuspend = 1, -}; -EXPORT_SYMBOL_GPL(cdc_driver); - -module_usb_driver(cdc_driver); - -MODULE_AUTHOR("David Brownell"); -MODULE_DESCRIPTION("USB CDC Ethernet devices"); -MODULE_LICENSE("GPL"); |