diff options
Diffstat (limited to 'ANDROID_3.4.5/drivers/media/video/stk-sensor.c')
| -rw-r--r-- | ANDROID_3.4.5/drivers/media/video/stk-sensor.c | 595 |
1 files changed, 0 insertions, 595 deletions
diff --git a/ANDROID_3.4.5/drivers/media/video/stk-sensor.c b/ANDROID_3.4.5/drivers/media/video/stk-sensor.c deleted file mode 100644 index e546b014..00000000 --- a/ANDROID_3.4.5/drivers/media/video/stk-sensor.c +++ /dev/null @@ -1,595 +0,0 @@ -/* stk-sensor.c: Driver for ov96xx sensor (used in some Syntek webcams) - * - * Copyright 2007-2008 Jaime Velasco Juan <jsagarribay@gmail.com> - * - * Some parts derived from ov7670.c: - * Copyright 2006 One Laptop Per Child Association, Inc. Written - * by Jonathan Corbet with substantial inspiration from Mark - * McClelland's ovcamchip code. - * - * Copyright 2006-7 Jonathan Corbet <corbet@lwn.net> - * - * This file may be distributed under the terms of the GNU General - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -/* Controlling the sensor via the STK1125 vendor specific control interface: - * The camera uses an OmniVision sensor and the stk1125 provides an - * SCCB(i2c)-USB bridge which let us program the sensor. - * In my case the sensor id is 0x9652, it can be read from sensor's register - * 0x0A and 0x0B as follows: - * - read register #R: - * output #R to index 0x0208 - * output 0x0070 to index 0x0200 - * input 1 byte from index 0x0201 (some kind of status register) - * until its value is 0x01 - * input 1 byte from index 0x0209. This is the value of #R - * - write value V to register #R - * output #R to index 0x0204 - * output V to index 0x0205 - * output 0x0005 to index 0x0200 - * input 1 byte from index 0x0201 until its value becomes 0x04 - */ - -/* It seems the i2c bus is controlled with these registers */ - -#include "stk-webcam.h" - -#define STK_IIC_BASE (0x0200) -# define STK_IIC_OP (STK_IIC_BASE) -# define STK_IIC_OP_TX (0x05) -# define STK_IIC_OP_RX (0x70) -# define STK_IIC_STAT (STK_IIC_BASE+1) -# define STK_IIC_STAT_TX_OK (0x04) -# define STK_IIC_STAT_RX_OK (0x01) -/* I don't know what does this register. - * when it is 0x00 or 0x01, we cannot talk to the sensor, - * other values work */ -# define STK_IIC_ENABLE (STK_IIC_BASE+2) -# define STK_IIC_ENABLE_NO (0x00) -/* This is what the driver writes in windows */ -# define STK_IIC_ENABLE_YES (0x1e) -/* - * Address of the slave. Seems like the binary driver look for the - * sensor in multiple places, attempting a reset sequence. - * We only know about the ov9650 - */ -# define STK_IIC_ADDR (STK_IIC_BASE+3) -# define STK_IIC_TX_INDEX (STK_IIC_BASE+4) -# define STK_IIC_TX_VALUE (STK_IIC_BASE+5) -# define STK_IIC_RX_INDEX (STK_IIC_BASE+8) -# define STK_IIC_RX_VALUE (STK_IIC_BASE+9) - -#define MAX_RETRIES (50) - -#define SENSOR_ADDRESS (0x60) - -/* From ov7670.c (These registers aren't fully accurate) */ - -/* Registers */ -#define REG_GAIN 0x00 /* Gain lower 8 bits (rest in vref) */ -#define REG_BLUE 0x01 /* blue gain */ -#define REG_RED 0x02 /* red gain */ -#define REG_VREF 0x03 /* Pieces of GAIN, VSTART, VSTOP */ -#define REG_COM1 0x04 /* Control 1 */ -#define COM1_CCIR656 0x40 /* CCIR656 enable */ -#define COM1_QFMT 0x20 /* QVGA/QCIF format */ -#define COM1_SKIP_0 0x00 /* Do not skip any row */ -#define COM1_SKIP_2 0x04 /* Skip 2 rows of 4 */ -#define COM1_SKIP_3 0x08 /* Skip 3 rows of 4 */ -#define REG_BAVE 0x05 /* U/B Average level */ -#define REG_GbAVE 0x06 /* Y/Gb Average level */ -#define REG_AECHH 0x07 /* AEC MS 5 bits */ -#define REG_RAVE 0x08 /* V/R Average level */ -#define REG_COM2 0x09 /* Control 2 */ -#define COM2_SSLEEP 0x10 /* Soft sleep mode */ -#define REG_PID 0x0a /* Product ID MSB */ -#define REG_VER 0x0b /* Product ID LSB */ -#define REG_COM3 0x0c /* Control 3 */ -#define COM3_SWAP 0x40 /* Byte swap */ -#define COM3_SCALEEN 0x08 /* Enable scaling */ -#define COM3_DCWEN 0x04 /* Enable downsamp/crop/window */ -#define REG_COM4 0x0d /* Control 4 */ -#define REG_COM5 0x0e /* All "reserved" */ -#define REG_COM6 0x0f /* Control 6 */ -#define REG_AECH 0x10 /* More bits of AEC value */ -#define REG_CLKRC 0x11 /* Clock control */ -#define CLK_PLL 0x80 /* Enable internal PLL */ -#define CLK_EXT 0x40 /* Use external clock directly */ -#define CLK_SCALE 0x3f /* Mask for internal clock scale */ -#define REG_COM7 0x12 /* Control 7 */ -#define COM7_RESET 0x80 /* Register reset */ -#define COM7_FMT_MASK 0x38 -#define COM7_FMT_SXGA 0x00 -#define COM7_FMT_VGA 0x40 -#define COM7_FMT_CIF 0x20 /* CIF format */ -#define COM7_FMT_QVGA 0x10 /* QVGA format */ -#define COM7_FMT_QCIF 0x08 /* QCIF format */ -#define COM7_RGB 0x04 /* bits 0 and 2 - RGB format */ -#define COM7_YUV 0x00 /* YUV */ -#define COM7_BAYER 0x01 /* Bayer format */ -#define COM7_PBAYER 0x05 /* "Processed bayer" */ -#define REG_COM8 0x13 /* Control 8 */ -#define COM8_FASTAEC 0x80 /* Enable fast AGC/AEC */ -#define COM8_AECSTEP 0x40 /* Unlimited AEC step size */ -#define COM8_BFILT 0x20 /* Band filter enable */ -#define COM8_AGC 0x04 /* Auto gain enable */ -#define COM8_AWB 0x02 /* White balance enable */ -#define COM8_AEC 0x01 /* Auto exposure enable */ -#define REG_COM9 0x14 /* Control 9 - gain ceiling */ -#define REG_COM10 0x15 /* Control 10 */ -#define COM10_HSYNC 0x40 /* HSYNC instead of HREF */ -#define COM10_PCLK_HB 0x20 /* Suppress PCLK on horiz blank */ -#define COM10_HREF_REV 0x08 /* Reverse HREF */ -#define COM10_VS_LEAD 0x04 /* VSYNC on clock leading edge */ -#define COM10_VS_NEG 0x02 /* VSYNC negative */ -#define COM10_HS_NEG 0x01 /* HSYNC negative */ -#define REG_HSTART 0x17 /* Horiz start high bits */ -#define REG_HSTOP 0x18 /* Horiz stop high bits */ -#define REG_VSTART 0x19 /* Vert start high bits */ -#define REG_VSTOP 0x1a /* Vert stop high bits */ -#define REG_PSHFT 0x1b /* Pixel delay after HREF */ -#define REG_MIDH 0x1c /* Manuf. ID high */ -#define REG_MIDL 0x1d /* Manuf. ID low */ -#define REG_MVFP 0x1e /* Mirror / vflip */ -#define MVFP_MIRROR 0x20 /* Mirror image */ -#define MVFP_FLIP 0x10 /* Vertical flip */ - -#define REG_AEW 0x24 /* AGC upper limit */ -#define REG_AEB 0x25 /* AGC lower limit */ -#define REG_VPT 0x26 /* AGC/AEC fast mode op region */ -#define REG_ADVFL 0x2d /* Insert dummy lines (LSB) */ -#define REG_ADVFH 0x2e /* Insert dummy lines (MSB) */ -#define REG_HSYST 0x30 /* HSYNC rising edge delay */ -#define REG_HSYEN 0x31 /* HSYNC falling edge delay */ -#define REG_HREF 0x32 /* HREF pieces */ -#define REG_TSLB 0x3a /* lots of stuff */ -#define TSLB_YLAST 0x04 /* UYVY or VYUY - see com13 */ -#define TSLB_BYTEORD 0x08 /* swap bytes in 16bit mode? */ -#define REG_COM11 0x3b /* Control 11 */ -#define COM11_NIGHT 0x80 /* NIght mode enable */ -#define COM11_NMFR 0x60 /* Two bit NM frame rate */ -#define COM11_HZAUTO 0x10 /* Auto detect 50/60 Hz */ -#define COM11_50HZ 0x08 /* Manual 50Hz select */ -#define COM11_EXP 0x02 -#define REG_COM12 0x3c /* Control 12 */ -#define COM12_HREF 0x80 /* HREF always */ -#define REG_COM13 0x3d /* Control 13 */ -#define COM13_GAMMA 0x80 /* Gamma enable */ -#define COM13_UVSAT 0x40 /* UV saturation auto adjustment */ -#define COM13_CMATRIX 0x10 /* Enable color matrix for RGB or YUV */ -#define COM13_UVSWAP 0x01 /* V before U - w/TSLB */ -#define REG_COM14 0x3e /* Control 14 */ -#define COM14_DCWEN 0x10 /* DCW/PCLK-scale enable */ -#define REG_EDGE 0x3f /* Edge enhancement factor */ -#define REG_COM15 0x40 /* Control 15 */ -#define COM15_R10F0 0x00 /* Data range 10 to F0 */ -#define COM15_R01FE 0x80 /* 01 to FE */ -#define COM15_R00FF 0xc0 /* 00 to FF */ -#define COM15_RGB565 0x10 /* RGB565 output */ -#define COM15_RGBFIXME 0x20 /* FIXME */ -#define COM15_RGB555 0x30 /* RGB555 output */ -#define REG_COM16 0x41 /* Control 16 */ -#define COM16_AWBGAIN 0x08 /* AWB gain enable */ -#define REG_COM17 0x42 /* Control 17 */ -#define COM17_AECWIN 0xc0 /* AEC window - must match COM4 */ -#define COM17_CBAR 0x08 /* DSP Color bar */ - -/* - * This matrix defines how the colors are generated, must be - * tweaked to adjust hue and saturation. - * - * Order: v-red, v-green, v-blue, u-red, u-green, u-blue - * - * They are nine-bit signed quantities, with the sign bit - * stored in 0x58. Sign for v-red is bit 0, and up from there. - */ -#define REG_CMATRIX_BASE 0x4f -#define CMATRIX_LEN 6 -#define REG_CMATRIX_SIGN 0x58 - - -#define REG_BRIGHT 0x55 /* Brightness */ -#define REG_CONTRAS 0x56 /* Contrast control */ - -#define REG_GFIX 0x69 /* Fix gain control */ - -#define REG_RGB444 0x8c /* RGB 444 control */ -#define R444_ENABLE 0x02 /* Turn on RGB444, overrides 5x5 */ -#define R444_RGBX 0x01 /* Empty nibble at end */ - -#define REG_HAECC1 0x9f /* Hist AEC/AGC control 1 */ -#define REG_HAECC2 0xa0 /* Hist AEC/AGC control 2 */ - -#define REG_BD50MAX 0xa5 /* 50hz banding step limit */ -#define REG_HAECC3 0xa6 /* Hist AEC/AGC control 3 */ -#define REG_HAECC4 0xa7 /* Hist AEC/AGC control 4 */ -#define REG_HAECC5 0xa8 /* Hist AEC/AGC control 5 */ -#define REG_HAECC6 0xa9 /* Hist AEC/AGC control 6 */ -#define REG_HAECC7 0xaa /* Hist AEC/AGC control 7 */ -#define REG_BD60MAX 0xab /* 60hz banding step limit */ - - - - -/* Returns 0 if OK */ -static int stk_sensor_outb(struct stk_camera *dev, u8 reg, u8 val) -{ - int i = 0; - int tmpval = 0; - - if (stk_camera_write_reg(dev, STK_IIC_TX_INDEX, reg)) - return 1; - if (stk_camera_write_reg(dev, STK_IIC_TX_VALUE, val)) - return 1; - if (stk_camera_write_reg(dev, STK_IIC_OP, STK_IIC_OP_TX)) - return 1; - do { - if (stk_camera_read_reg(dev, STK_IIC_STAT, &tmpval)) - return 1; - i++; - } while (tmpval == 0 && i < MAX_RETRIES); - if (tmpval != STK_IIC_STAT_TX_OK) { - if (tmpval) - STK_ERROR("stk_sensor_outb failed, status=0x%02x\n", - tmpval); - return 1; - } else - return 0; -} - -static int stk_sensor_inb(struct stk_camera *dev, u8 reg, u8 *val) -{ - int i = 0; - int tmpval = 0; - - if (stk_camera_write_reg(dev, STK_IIC_RX_INDEX, reg)) - return 1; - if (stk_camera_write_reg(dev, STK_IIC_OP, STK_IIC_OP_RX)) - return 1; - do { - if (stk_camera_read_reg(dev, STK_IIC_STAT, &tmpval)) - return 1; - i++; - } while (tmpval == 0 && i < MAX_RETRIES); - if (tmpval != STK_IIC_STAT_RX_OK) { - if (tmpval) - STK_ERROR("stk_sensor_inb failed, status=0x%02x\n", - tmpval); - return 1; - } - - if (stk_camera_read_reg(dev, STK_IIC_RX_VALUE, &tmpval)) - return 1; - - *val = (u8) tmpval; - return 0; -} - -static int stk_sensor_write_regvals(struct stk_camera *dev, - struct regval *rv) -{ - int ret; - if (rv == NULL) - return 0; - while (rv->reg != 0xff || rv->val != 0xff) { - ret = stk_sensor_outb(dev, rv->reg, rv->val); - if (ret != 0) - return ret; - rv++; - } - return 0; -} - -int stk_sensor_sleep(struct stk_camera *dev) -{ - u8 tmp; - return stk_sensor_inb(dev, REG_COM2, &tmp) - || stk_sensor_outb(dev, REG_COM2, tmp|COM2_SSLEEP); -} - -int stk_sensor_wakeup(struct stk_camera *dev) -{ - u8 tmp; - return stk_sensor_inb(dev, REG_COM2, &tmp) - || stk_sensor_outb(dev, REG_COM2, tmp&~COM2_SSLEEP); -} - -static struct regval ov_initvals[] = { - {REG_CLKRC, CLK_PLL}, - {REG_COM11, 0x01}, - {0x6a, 0x7d}, - {REG_AECH, 0x40}, - {REG_GAIN, 0x00}, - {REG_BLUE, 0x80}, - {REG_RED, 0x80}, - /* Do not enable fast AEC for now */ - /*{REG_COM8, COM8_FASTAEC|COM8_AECSTEP|COM8_BFILT|COM8_AGC|COM8_AEC},*/ - {REG_COM8, COM8_AECSTEP|COM8_BFILT|COM8_AGC|COM8_AEC}, - {0x39, 0x50}, {0x38, 0x93}, - {0x37, 0x00}, {0x35, 0x81}, - {REG_COM5, 0x20}, - {REG_COM1, 0x00}, - {REG_COM3, 0x00}, - {REG_COM4, 0x00}, - {REG_PSHFT, 0x00}, - {0x16, 0x07}, - {0x33, 0xe2}, {0x34, 0xbf}, - {REG_COM16, 0x00}, - {0x96, 0x04}, - /* Gamma curve values */ -/* { 0x7a, 0x20 }, { 0x7b, 0x10 }, - { 0x7c, 0x1e }, { 0x7d, 0x35 }, - { 0x7e, 0x5a }, { 0x7f, 0x69 }, - { 0x80, 0x76 }, { 0x81, 0x80 }, - { 0x82, 0x88 }, { 0x83, 0x8f }, - { 0x84, 0x96 }, { 0x85, 0xa3 }, - { 0x86, 0xaf }, { 0x87, 0xc4 }, - { 0x88, 0xd7 }, { 0x89, 0xe8 }, -*/ - {REG_GFIX, 0x40}, - {0x8e, 0x00}, - {REG_COM12, 0x73}, - {0x8f, 0xdf}, {0x8b, 0x06}, - {0x8c, 0x20}, - {0x94, 0x88}, {0x95, 0x88}, -/* {REG_COM15, 0xc1}, TODO */ - {0x29, 0x3f}, - {REG_COM6, 0x42}, - {REG_BD50MAX, 0x80}, - {REG_HAECC6, 0xb8}, {REG_HAECC7, 0x92}, - {REG_BD60MAX, 0x0a}, - {0x90, 0x00}, {0x91, 0x00}, - {REG_HAECC1, 0x00}, {REG_HAECC2, 0x00}, - {REG_AEW, 0x68}, {REG_AEB, 0x5c}, - {REG_VPT, 0xc3}, - {REG_COM9, 0x2e}, - {0x2a, 0x00}, {0x2b, 0x00}, - - {0xff, 0xff}, /* END MARKER */ -}; - -/* Probe the I2C bus and initialise the sensor chip */ -int stk_sensor_init(struct stk_camera *dev) -{ - u8 idl = 0; - u8 idh = 0; - - if (stk_camera_write_reg(dev, STK_IIC_ENABLE, STK_IIC_ENABLE_YES) - || stk_camera_write_reg(dev, STK_IIC_ADDR, SENSOR_ADDRESS) - || stk_sensor_outb(dev, REG_COM7, COM7_RESET)) { - STK_ERROR("Sensor resetting failed\n"); - return -ENODEV; - } - msleep(10); - /* Read the manufacturer ID: ov = 0x7FA2 */ - if (stk_sensor_inb(dev, REG_MIDH, &idh) - || stk_sensor_inb(dev, REG_MIDL, &idl)) { - STK_ERROR("Strange error reading sensor ID\n"); - return -ENODEV; - } - if (idh != 0x7f || idl != 0xa2) { - STK_ERROR("Huh? you don't have a sensor from ovt\n"); - return -ENODEV; - } - if (stk_sensor_inb(dev, REG_PID, &idh) - || stk_sensor_inb(dev, REG_VER, &idl)) { - STK_ERROR("Could not read sensor model\n"); - return -ENODEV; - } - stk_sensor_write_regvals(dev, ov_initvals); - msleep(10); - STK_INFO("OmniVision sensor detected, id %02X%02X" - " at address %x\n", idh, idl, SENSOR_ADDRESS); - return 0; -} - -/* V4L2_PIX_FMT_UYVY */ -static struct regval ov_fmt_uyvy[] = { - {REG_TSLB, TSLB_YLAST|0x08 }, - { 0x4f, 0x80 }, /* "matrix coefficient 1" */ - { 0x50, 0x80 }, /* "matrix coefficient 2" */ - { 0x51, 0 }, /* vb */ - { 0x52, 0x22 }, /* "matrix coefficient 4" */ - { 0x53, 0x5e }, /* "matrix coefficient 5" */ - { 0x54, 0x80 }, /* "matrix coefficient 6" */ - {REG_COM13, COM13_UVSAT|COM13_CMATRIX}, - {REG_COM15, COM15_R00FF }, - {0xff, 0xff}, /* END MARKER */ -}; -/* V4L2_PIX_FMT_YUYV */ -static struct regval ov_fmt_yuyv[] = { - {REG_TSLB, 0 }, - { 0x4f, 0x80 }, /* "matrix coefficient 1" */ - { 0x50, 0x80 }, /* "matrix coefficient 2" */ - { 0x51, 0 }, /* vb */ - { 0x52, 0x22 }, /* "matrix coefficient 4" */ - { 0x53, 0x5e }, /* "matrix coefficient 5" */ - { 0x54, 0x80 }, /* "matrix coefficient 6" */ - {REG_COM13, COM13_UVSAT|COM13_CMATRIX}, - {REG_COM15, COM15_R00FF }, - {0xff, 0xff}, /* END MARKER */ -}; - -/* V4L2_PIX_FMT_RGB565X rrrrrggg gggbbbbb */ -static struct regval ov_fmt_rgbr[] = { - { REG_RGB444, 0 }, /* No RGB444 please */ - {REG_TSLB, 0x00}, - { REG_COM1, 0x0 }, - { REG_COM9, 0x38 }, /* 16x gain ceiling; 0x8 is reserved bit */ - { 0x4f, 0xb3 }, /* "matrix coefficient 1" */ - { 0x50, 0xb3 }, /* "matrix coefficient 2" */ - { 0x51, 0 }, /* vb */ - { 0x52, 0x3d }, /* "matrix coefficient 4" */ - { 0x53, 0xa7 }, /* "matrix coefficient 5" */ - { 0x54, 0xe4 }, /* "matrix coefficient 6" */ - { REG_COM13, COM13_GAMMA }, - { REG_COM15, COM15_RGB565|COM15_R00FF }, - { 0xff, 0xff }, -}; - -/* V4L2_PIX_FMT_RGB565 gggbbbbb rrrrrggg */ -static struct regval ov_fmt_rgbp[] = { - { REG_RGB444, 0 }, /* No RGB444 please */ - {REG_TSLB, TSLB_BYTEORD }, - { REG_COM1, 0x0 }, - { REG_COM9, 0x38 }, /* 16x gain ceiling; 0x8 is reserved bit */ - { 0x4f, 0xb3 }, /* "matrix coefficient 1" */ - { 0x50, 0xb3 }, /* "matrix coefficient 2" */ - { 0x51, 0 }, /* vb */ - { 0x52, 0x3d }, /* "matrix coefficient 4" */ - { 0x53, 0xa7 }, /* "matrix coefficient 5" */ - { 0x54, 0xe4 }, /* "matrix coefficient 6" */ - { REG_COM13, COM13_GAMMA }, - { REG_COM15, COM15_RGB565|COM15_R00FF }, - { 0xff, 0xff }, -}; - -/* V4L2_PIX_FMT_SRGGB8 */ -static struct regval ov_fmt_bayer[] = { - /* This changes color order */ - {REG_TSLB, 0x40}, /* BGGR */ - /* {REG_TSLB, 0x08}, */ /* BGGR with vertical image flipping */ - {REG_COM15, COM15_R00FF }, - {0xff, 0xff}, /* END MARKER */ -}; -/* - * Store a set of start/stop values into the camera. - */ -static int stk_sensor_set_hw(struct stk_camera *dev, - int hstart, int hstop, int vstart, int vstop) -{ - int ret; - unsigned char v; -/* - * Horizontal: 11 bits, top 8 live in hstart and hstop. Bottom 3 of - * hstart are in href[2:0], bottom 3 of hstop in href[5:3]. There is - * a mystery "edge offset" value in the top two bits of href. - */ - ret = stk_sensor_outb(dev, REG_HSTART, (hstart >> 3) & 0xff); - ret += stk_sensor_outb(dev, REG_HSTOP, (hstop >> 3) & 0xff); - ret += stk_sensor_inb(dev, REG_HREF, &v); - v = (v & 0xc0) | ((hstop & 0x7) << 3) | (hstart & 0x7); - msleep(10); - ret += stk_sensor_outb(dev, REG_HREF, v); -/* - * Vertical: similar arrangement (note: this is different from ov7670.c) - */ - ret += stk_sensor_outb(dev, REG_VSTART, (vstart >> 3) & 0xff); - ret += stk_sensor_outb(dev, REG_VSTOP, (vstop >> 3) & 0xff); - ret += stk_sensor_inb(dev, REG_VREF, &v); - v = (v & 0xc0) | ((vstop & 0x7) << 3) | (vstart & 0x7); - msleep(10); - ret += stk_sensor_outb(dev, REG_VREF, v); - return ret; -} - - -int stk_sensor_configure(struct stk_camera *dev) -{ - int com7; - /* - * We setup the sensor to output dummy lines in low-res modes, - * so we don't get absurdly hight framerates. - */ - unsigned dummylines; - int flip; - struct regval *rv; - - switch (dev->vsettings.mode) { - case MODE_QCIF: com7 = COM7_FMT_QCIF; - dummylines = 604; - break; - case MODE_QVGA: com7 = COM7_FMT_QVGA; - dummylines = 267; - break; - case MODE_CIF: com7 = COM7_FMT_CIF; - dummylines = 412; - break; - case MODE_VGA: com7 = COM7_FMT_VGA; - dummylines = 11; - break; - case MODE_SXGA: com7 = COM7_FMT_SXGA; - dummylines = 0; - break; - default: STK_ERROR("Unsupported mode %d\n", dev->vsettings.mode); - return -EFAULT; - } - switch (dev->vsettings.palette) { - case V4L2_PIX_FMT_UYVY: - com7 |= COM7_YUV; - rv = ov_fmt_uyvy; - break; - case V4L2_PIX_FMT_YUYV: - com7 |= COM7_YUV; - rv = ov_fmt_yuyv; - break; - case V4L2_PIX_FMT_RGB565: - com7 |= COM7_RGB; - rv = ov_fmt_rgbp; - break; - case V4L2_PIX_FMT_RGB565X: - com7 |= COM7_RGB; - rv = ov_fmt_rgbr; - break; - case V4L2_PIX_FMT_SBGGR8: - com7 |= COM7_PBAYER; - rv = ov_fmt_bayer; - break; - default: STK_ERROR("Unsupported colorspace\n"); - return -EFAULT; - } - /*FIXME sometimes the sensor go to a bad state - stk_sensor_write_regvals(dev, ov_initvals); */ - stk_sensor_outb(dev, REG_COM7, com7); - msleep(50); - stk_sensor_write_regvals(dev, rv); - flip = (dev->vsettings.vflip?MVFP_FLIP:0) - | (dev->vsettings.hflip?MVFP_MIRROR:0); - stk_sensor_outb(dev, REG_MVFP, flip); - if (dev->vsettings.palette == V4L2_PIX_FMT_SBGGR8 - && !dev->vsettings.vflip) - stk_sensor_outb(dev, REG_TSLB, 0x08); - stk_sensor_outb(dev, REG_ADVFH, dummylines >> 8); - stk_sensor_outb(dev, REG_ADVFL, dummylines & 0xff); - msleep(50); - switch (dev->vsettings.mode) { - case MODE_VGA: - if (stk_sensor_set_hw(dev, 302, 1582, 6, 486)) - STK_ERROR("stk_sensor_set_hw failed (VGA)\n"); - break; - case MODE_SXGA: - case MODE_CIF: - case MODE_QVGA: - case MODE_QCIF: - /*FIXME These settings seem ignored by the sensor - if (stk_sensor_set_hw(dev, 220, 1500, 10, 1034)) - STK_ERROR("stk_sensor_set_hw failed (SXGA)\n"); - */ - break; - } - msleep(10); - return 0; -} - -int stk_sensor_set_brightness(struct stk_camera *dev, int br) -{ - if (br < 0 || br > 0xff) - return -EINVAL; - stk_sensor_outb(dev, REG_AEB, max(0x00, br - 6)); - stk_sensor_outb(dev, REG_AEW, min(0xff, br + 6)); - return 0; -} - |