1 files changed, 0 insertions, 150 deletions
diff --git a/ANDROID_3.4.5/arch/powerpc/boot/mktree.c b/ANDROID_3.4.5/arch/powerpc/boot/mktree.c
deleted file mode 100644
index e2ae2434..00000000
--- a/ANDROID_3.4.5/arch/powerpc/boot/mktree.c
+++ /dev/null
@@ -1,150 +0,0 @@
-/*
- * Makes a tree bootable image for IBM Evaluation boards.
- * Basically, just take a zImage, skip the ELF header, and stuff
- * a 32 byte header on the front.
- *
- * We use htonl, which is a network macro, to make sure we're doing
- * The Right Thing on an LE machine.  It's non-obvious, but it should
- * work on anything BSD'ish.
- */
-
-#include <fcntl.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <sys/stat.h>
-#include <unistd.h>
-#include <netinet/in.h>
-#ifdef __sun__
-#include <inttypes.h>
-#else
-#include <stdint.h>
-#endif
-
-/* This gets tacked on the front of the image.  There are also a few
- * bytes allocated after the _start label used by the boot rom (see
- * head.S for details).
- */
-typedef struct boot_block {
-	uint32_t bb_magic;		/* 0x0052504F */
-	uint32_t bb_dest;		/* Target address of the image */
-	uint32_t bb_num_512blocks;	/* Size, rounded-up, in 512 byte blks */
-	uint32_t bb_debug_flag;	/* Run debugger or image after load */
-	uint32_t bb_entry_point;	/* The image address to start */
-	uint32_t bb_checksum;	/* 32 bit checksum including header */
-	uint32_t reserved[2];
-} boot_block_t;
-
-#define IMGBLK	512
-unsigned int	tmpbuf[IMGBLK / sizeof(unsigned int)];
-
-int main(int argc, char *argv[])
-{
-	int	in_fd, out_fd;
-	int	nblks, i;
-	unsigned int	cksum, *cp;
-	struct	stat	st;
-	boot_block_t	bt;
-
-	if (argc < 5) {
-		fprintf(stderr, "usage: %s <zImage-file> <boot-image> <load address> <entry point>\n",argv[0]);
-		exit(1);
-	}
-
-	if (stat(argv[1], &st) < 0) {
-		perror("stat");
-		exit(2);
-	}
-
-	nblks = (st.st_size + IMGBLK) / IMGBLK;
-
-	bt.bb_magic = htonl(0x0052504F);
-
-	/* If we have the optional entry point parameter, use it */
-	bt.bb_dest = htonl(strtoul(argv[3], NULL, 0));
-	bt.bb_entry_point = htonl(strtoul(argv[4], NULL, 0));
-
-	/* We know these from the linker command.
-	 * ...and then move it up into memory a little more so the
-	 * relocation can happen.
-	 */
-	bt.bb_num_512blocks = htonl(nblks);
-	bt.bb_debug_flag = 0;
-
-	bt.bb_checksum = 0;
-
-	/* To be neat and tidy :-).
-	*/
-	bt.reserved[0] = 0;
-	bt.reserved[1] = 0;
-
-	if ((in_fd = open(argv[1], O_RDONLY)) < 0) {
-		perror("zImage open");
-		exit(3);
-	}
-
-	if ((out_fd = open(argv[2], (O_RDWR | O_CREAT | O_TRUNC), 0666)) < 0) {
-		perror("bootfile open");
-		exit(3);
-	}
-
-	cksum = 0;
-	cp = (void *)&bt;
-	for (i = 0; i < sizeof(bt) / sizeof(unsigned int); i++)
-		cksum += *cp++;
-
-	/* Assume zImage is an ELF file, and skip the 64K header.
-	*/
-	if (read(in_fd, tmpbuf, sizeof(tmpbuf)) != sizeof(tmpbuf)) {
-		fprintf(stderr, "%s is too small to be an ELF image\n",
-				argv[1]);
-		exit(4);
-	}
-
-	if (tmpbuf[0] != htonl(0x7f454c46)) {
-		fprintf(stderr, "%s is not an ELF image\n", argv[1]);
-		exit(4);
-	}
-
-	if (lseek(in_fd, (64 * 1024), SEEK_SET) < 0) {
-		fprintf(stderr, "%s failed to seek in ELF image\n", argv[1]);
-		exit(4);
-	}
-
-	nblks -= (64 * 1024) / IMGBLK;
-
-	/* And away we go......
-	*/
-	if (write(out_fd, &bt, sizeof(bt)) != sizeof(bt)) {
-		perror("boot-image write");
-		exit(5);
-	}
-
-	while (nblks-- > 0) {
-		if (read(in_fd, tmpbuf, sizeof(tmpbuf)) < 0) {
-			perror("zImage read");
-			exit(5);
-		}
-		cp = tmpbuf;
-		for (i = 0; i < sizeof(tmpbuf) / sizeof(unsigned int); i++)
-			cksum += *cp++;
-		if (write(out_fd, tmpbuf, sizeof(tmpbuf)) != sizeof(tmpbuf)) {
-			perror("boot-image write");
-			exit(5);
-		}
-	}
-
-	/* rewrite the header with the computed checksum.
-	*/
-	bt.bb_checksum = htonl(cksum);
-	if (lseek(out_fd, 0, SEEK_SET) < 0) {
-		perror("rewrite seek");
-		exit(1);
-	}
-	if (write(out_fd, &bt, sizeof(bt)) != sizeof(bt)) {
-		perror("boot-image rewrite");
-		exit(1);
-	}
-
-	exit(0);
-}