diff options
Diffstat (limited to 'ANDROID_3.4.5/arch/powerpc/boot/dts/pcm032.dts')
| -rw-r--r-- | ANDROID_3.4.5/arch/powerpc/boot/dts/pcm032.dts | 218 |
1 files changed, 0 insertions, 218 deletions
diff --git a/ANDROID_3.4.5/arch/powerpc/boot/dts/pcm032.dts b/ANDROID_3.4.5/arch/powerpc/boot/dts/pcm032.dts deleted file mode 100644 index 1dd478bf..00000000 --- a/ANDROID_3.4.5/arch/powerpc/boot/dts/pcm032.dts +++ /dev/null @@ -1,218 +0,0 @@ -/* - * phyCORE-MPC5200B-IO (pcm032) board Device Tree Source - * - * Copyright (C) 2006-2009 Pengutronix - * Sascha Hauer <s.hauer@pengutronix.de> - * Juergen Beisert <j.beisert@pengutronix.de> - * Wolfram Sang <w.sang@pengutronix.de> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -/include/ "mpc5200b.dtsi" - -/ { - model = "phytec,pcm032"; - compatible = "phytec,pcm032"; - - memory { - reg = <0x00000000 0x08000000>; // 128MB - }; - - soc5200@f0000000 { - timer@600 { // General Purpose Timer - fsl,has-wdt; - }; - - gpt2: timer@620 { // General Purpose Timer in GPIO mode - gpio-controller; - #gpio-cells = <2>; - }; - - gpt3: timer@630 { // General Purpose Timer in GPIO mode - gpio-controller; - #gpio-cells = <2>; - }; - - gpt4: timer@640 { // General Purpose Timer in GPIO mode - gpio-controller; - #gpio-cells = <2>; - }; - - gpt5: timer@650 { // General Purpose Timer in GPIO mode - gpio-controller; - #gpio-cells = <2>; - }; - - gpt6: timer@660 { // General Purpose Timer in GPIO mode - compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; - reg = <0x660 0x10>; - interrupts = <1 15 0>; - gpio-controller; - #gpio-cells = <2>; - }; - - gpt7: timer@670 { // General Purpose Timer in GPIO mode - gpio-controller; - #gpio-cells = <2>; - }; - - psc@2000 { /* PSC1 is ac97 */ - compatible = "fsl,mpc5200b-psc-ac97","fsl,mpc5200-psc-ac97"; - cell-index = <0>; - }; - - /* PSC2 port is used by CAN1/2 */ - psc@2200 { - status = "disabled"; - }; - - psc@2400 { /* PSC3 in UART mode */ - compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; - }; - - /* PSC4 is ??? */ - psc@2600 { - status = "disabled"; - }; - - /* PSC5 is ??? */ - psc@2800 { - status = "disabled"; - }; - - psc@2c00 { /* PSC6 in UART mode */ - compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; - }; - - ethernet@3000 { - phy-handle = <&phy0>; - }; - - mdio@3000 { - phy0: ethernet-phy@0 { - reg = <0>; - }; - }; - - i2c@3d40 { - rtc@51 { - compatible = "nxp,pcf8563"; - reg = <0x51>; - }; - eeprom@52 { - compatible = "catalyst,24c32"; - reg = <0x52>; - pagesize = <32>; - }; - }; - }; - - pci@f0000d00 { - interrupt-map-mask = <0xf800 0 0 7>; - interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3 // 1st slot - 0xc000 0 0 2 &mpc5200_pic 1 1 3 - 0xc000 0 0 3 &mpc5200_pic 1 2 3 - 0xc000 0 0 4 &mpc5200_pic 1 3 3 - - 0xc800 0 0 1 &mpc5200_pic 1 1 3 // 2nd slot - 0xc800 0 0 2 &mpc5200_pic 1 2 3 - 0xc800 0 0 3 &mpc5200_pic 1 3 3 - 0xc800 0 0 4 &mpc5200_pic 0 0 3>; - ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000 - 0x02000000 0 0xa0000000 0xa0000000 0 0x10000000 - 0x01000000 0 0x00000000 0xb0000000 0 0x01000000>; - }; - - localbus { - ranges = <0 0 0xfe000000 0x02000000 - 1 0 0xfc000000 0x02000000 - 2 0 0xfbe00000 0x00200000 - 3 0 0xf9e00000 0x02000000 - 4 0 0xf7e00000 0x02000000 - 5 0 0xe6000000 0x02000000 - 6 0 0xe8000000 0x02000000 - 7 0 0xea000000 0x02000000>; - - flash@0,0 { - compatible = "cfi-flash"; - reg = <0 0 0x02000000>; - bank-width = <4>; - #size-cells = <1>; - #address-cells = <1>; - - partition@0 { - label = "ubootl"; - reg = <0x00000000 0x00040000>; - }; - partition@40000 { - label = "kernel"; - reg = <0x00040000 0x001c0000>; - }; - partition@200000 { - label = "jffs2"; - reg = <0x00200000 0x01d00000>; - }; - partition@1f00000 { - label = "uboot"; - reg = <0x01f00000 0x00040000>; - }; - partition@1f40000 { - label = "env"; - reg = <0x01f40000 0x00040000>; - }; - partition@1f80000 { - label = "oftree"; - reg = <0x01f80000 0x00040000>; - }; - partition@1fc0000 { - label = "space"; - reg = <0x01fc0000 0x00040000>; - }; - }; - - sram@2,0 { - compatible = "mtd-ram"; - reg = <2 0 0x00200000>; - bank-width = <2>; - }; - - /* - * example snippets for FPGA - * - * fpga@3,0 { - * compatible = "fpga_driver"; - * reg = <3 0 0x02000000>; - * bank-width = <4>; - * }; - * - * fpga@4,0 { - * compatible = "fpga_driver"; - * reg = <4 0 0x02000000>; - * bank-width = <4>; - * }; - */ - - /* - * example snippets for free chipselects - * - * device@5,0 { - * compatible = "custom_driver"; - * reg = <5 0 0x02000000>; - * }; - * - * device@6,0 { - * compatible = "custom_driver"; - * reg = <6 0 0x02000000>; - * }; - * - * device@7,0 { - * compatible = "custom_driver"; - * reg = <7 0 0x02000000>; - * }; - */ - }; -}; |