diff options
Diffstat (limited to 'ANDROID_3.4.5/arch/powerpc/boot/dts/katmai.dts')
| -rw-r--r-- | ANDROID_3.4.5/arch/powerpc/boot/dts/katmai.dts | 510 |
1 files changed, 0 insertions, 510 deletions
diff --git a/ANDROID_3.4.5/arch/powerpc/boot/dts/katmai.dts b/ANDROID_3.4.5/arch/powerpc/boot/dts/katmai.dts deleted file mode 100644 index f913dbe2..00000000 --- a/ANDROID_3.4.5/arch/powerpc/boot/dts/katmai.dts +++ /dev/null @@ -1,510 +0,0 @@ -/* - * Device Tree Source for AMCC Katmai eval board - * - * Copyright (c) 2006, 2007 IBM Corp. - * Benjamin Herrenschmidt <benh@kernel.crashing.org> - * - * Copyright (c) 2006, 2007 IBM Corp. - * Josh Boyer <jwboyer@linux.vnet.ibm.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without - * any warranty of any kind, whether express or implied. - */ - -/dts-v1/; - -/ { - #address-cells = <2>; - #size-cells = <2>; - model = "amcc,katmai"; - compatible = "amcc,katmai"; - dcr-parent = <&{/cpus/cpu@0}>; - - aliases { - ethernet0 = &EMAC0; - serial0 = &UART0; - serial1 = &UART1; - serial2 = &UART2; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu@0 { - device_type = "cpu"; - model = "PowerPC,440SPe"; - reg = <0x00000000>; - clock-frequency = <0>; /* Filled in by zImage */ - timebase-frequency = <0>; /* Filled in by zImage */ - i-cache-line-size = <32>; - d-cache-line-size = <32>; - i-cache-size = <32768>; - d-cache-size = <32768>; - dcr-controller; - dcr-access-method = "native"; - reset-type = <2>; /* Use chip-reset */ - }; - }; - - memory { - device_type = "memory"; - reg = <0x0 0x00000000 0x0 0x00000000>; /* Filled in by U-Boot */ - }; - - UIC0: interrupt-controller0 { - compatible = "ibm,uic-440spe","ibm,uic"; - interrupt-controller; - cell-index = <0>; - dcr-reg = <0x0c0 0x009>; - #address-cells = <0>; - #size-cells = <0>; - #interrupt-cells = <2>; - }; - - UIC1: interrupt-controller1 { - compatible = "ibm,uic-440spe","ibm,uic"; - interrupt-controller; - cell-index = <1>; - dcr-reg = <0x0d0 0x009>; - #address-cells = <0>; - #size-cells = <0>; - #interrupt-cells = <2>; - interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */ - interrupt-parent = <&UIC0>; - }; - - UIC2: interrupt-controller2 { - compatible = "ibm,uic-440spe","ibm,uic"; - interrupt-controller; - cell-index = <2>; - dcr-reg = <0x0e0 0x009>; - #address-cells = <0>; - #size-cells = <0>; - #interrupt-cells = <2>; - interrupts = <0xa 0x4 0xb 0x4>; /* cascade */ - interrupt-parent = <&UIC0>; - }; - - UIC3: interrupt-controller3 { - compatible = "ibm,uic-440spe","ibm,uic"; - interrupt-controller; - cell-index = <3>; - dcr-reg = <0x0f0 0x009>; - #address-cells = <0>; - #size-cells = <0>; - #interrupt-cells = <2>; - interrupts = <0x10 0x4 0x11 0x4>; /* cascade */ - interrupt-parent = <&UIC0>; - }; - - SDR0: sdr { - compatible = "ibm,sdr-440spe"; - dcr-reg = <0x00e 0x002>; - }; - - CPR0: cpr { - compatible = "ibm,cpr-440spe"; - dcr-reg = <0x00c 0x002>; - }; - - MQ0: mq { - compatible = "ibm,mq-440spe"; - dcr-reg = <0x040 0x020>; - }; - - plb { - compatible = "ibm,plb-440spe", "ibm,plb-440gp", "ibm,plb4"; - #address-cells = <2>; - #size-cells = <1>; - /* addr-child addr-parent size */ - ranges = <0x4 0x00100000 0x4 0x00100000 0x00001000 - 0x4 0x00200000 0x4 0x00200000 0x00000400 - 0x4 0xe0000000 0x4 0xe0000000 0x20000000 - 0xc 0x00000000 0xc 0x00000000 0x20000000 - 0xd 0x00000000 0xd 0x00000000 0x80000000 - 0xd 0x80000000 0xd 0x80000000 0x80000000 - 0xe 0x00000000 0xe 0x00000000 0x80000000 - 0xe 0x80000000 0xe 0x80000000 0x80000000 - 0xf 0x00000000 0xf 0x00000000 0x80000000 - 0xf 0x80000000 0xf 0x80000000 0x80000000>; - clock-frequency = <0>; /* Filled in by zImage */ - - SDRAM0: sdram { - compatible = "ibm,sdram-440spe", "ibm,sdram-405gp"; - dcr-reg = <0x010 0x002>; - }; - - MAL0: mcmal { - compatible = "ibm,mcmal-440spe", "ibm,mcmal2"; - dcr-reg = <0x180 0x062>; - num-tx-chans = <2>; - num-rx-chans = <1>; - interrupt-parent = <&MAL0>; - interrupts = <0x0 0x1 0x2 0x3 0x4>; - #interrupt-cells = <1>; - #address-cells = <0>; - #size-cells = <0>; - interrupt-map = </*TXEOB*/ 0x0 &UIC1 0x6 0x4 - /*RXEOB*/ 0x1 &UIC1 0x7 0x4 - /*SERR*/ 0x2 &UIC1 0x1 0x4 - /*TXDE*/ 0x3 &UIC1 0x2 0x4 - /*RXDE*/ 0x4 &UIC1 0x3 0x4>; - }; - - POB0: opb { - compatible = "ibm,opb-440spe", "ibm,opb-440gp", "ibm,opb"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0xe0000000 0x00000004 0xe0000000 0x20000000>; - clock-frequency = <0>; /* Filled in by zImage */ - - EBC0: ebc { - compatible = "ibm,ebc-440spe", "ibm,ebc-440gp", "ibm,ebc"; - dcr-reg = <0x012 0x002>; - #address-cells = <2>; - #size-cells = <1>; - clock-frequency = <0>; /* Filled in by zImage */ - /* ranges property is supplied by U-Boot */ - interrupts = <0x5 0x1>; - interrupt-parent = <&UIC1>; - - nor_flash@0,0 { - compatible = "cfi-flash"; - bank-width = <2>; - reg = <0x00000000 0x00000000 0x01000000>; - #address-cells = <1>; - #size-cells = <1>; - partition@0 { - label = "kernel"; - reg = <0x00000000 0x001e0000>; - }; - partition@1e0000 { - label = "dtb"; - reg = <0x001e0000 0x00020000>; - }; - partition@200000 { - label = "root"; - reg = <0x00200000 0x00200000>; - }; - partition@400000 { - label = "user"; - reg = <0x00400000 0x00b60000>; - }; - partition@f60000 { - label = "env"; - reg = <0x00f60000 0x00040000>; - }; - partition@fa0000 { - label = "u-boot"; - reg = <0x00fa0000 0x00060000>; - }; - }; - }; - - UART0: serial@f0000200 { - device_type = "serial"; - compatible = "ns16550"; - reg = <0xf0000200 0x00000008>; - virtual-reg = <0xa0000200>; - clock-frequency = <0>; /* Filled in by zImage */ - current-speed = <115200>; - interrupt-parent = <&UIC0>; - interrupts = <0x0 0x4>; - }; - - UART1: serial@f0000300 { - device_type = "serial"; - compatible = "ns16550"; - reg = <0xf0000300 0x00000008>; - virtual-reg = <0xa0000300>; - clock-frequency = <0>; - current-speed = <0>; - interrupt-parent = <&UIC0>; - interrupts = <0x1 0x4>; - }; - - - UART2: serial@f0000600 { - device_type = "serial"; - compatible = "ns16550"; - reg = <0xf0000600 0x00000008>; - virtual-reg = <0xa0000600>; - clock-frequency = <0>; - current-speed = <0>; - interrupt-parent = <&UIC1>; - interrupts = <0x5 0x4>; - }; - - IIC0: i2c@f0000400 { - compatible = "ibm,iic-440spe", "ibm,iic-440gp", "ibm,iic"; - reg = <0xf0000400 0x00000014>; - interrupt-parent = <&UIC0>; - interrupts = <0x2 0x4>; - }; - - IIC1: i2c@f0000500 { - compatible = "ibm,iic-440spe", "ibm,iic-440gp", "ibm,iic"; - reg = <0xf0000500 0x00000014>; - interrupt-parent = <&UIC0>; - interrupts = <0x3 0x4>; - }; - - EMAC0: ethernet@f0000800 { - linux,network-index = <0x0>; - device_type = "network"; - compatible = "ibm,emac-440spe", "ibm,emac4"; - interrupt-parent = <&UIC1>; - interrupts = <0x1c 0x4 0x1d 0x4>; - reg = <0xf0000800 0x00000074>; - local-mac-address = [000000000000]; - mal-device = <&MAL0>; - mal-tx-channel = <0>; - mal-rx-channel = <0>; - cell-index = <0>; - max-frame-size = <9000>; - rx-fifo-size = <4096>; - tx-fifo-size = <2048>; - phy-mode = "gmii"; - phy-map = <0x00000000>; - has-inverted-stacr-oc; - has-new-stacr-staopc; - }; - }; - - PCIX0: pci@c0ec00000 { - device_type = "pci"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - compatible = "ibm,plb-pcix-440spe", "ibm,plb-pcix"; - primary; - large-inbound-windows; - enable-msi-hole; - reg = <0x0000000c 0x0ec00000 0x00000008 /* Config space access */ - 0x00000000 0x00000000 0x00000000 /* no IACK cycles */ - 0x0000000c 0x0ed00000 0x00000004 /* Special cycles */ - 0x0000000c 0x0ec80000 0x00000100 /* Internal registers */ - 0x0000000c 0x0ec80100 0x000000fc>; /* Internal messaging registers */ - - /* Outbound ranges, one memory and one IO, - * later cannot be changed - */ - ranges = <0x02000000 0x00000000 0x80000000 0x0000000d 0x80000000 0x00000000 0x80000000 - 0x01000000 0x00000000 0x00000000 0x0000000c 0x08000000 0x00000000 0x00010000>; - - /* Inbound 4GB range starting at 0 */ - dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x1 0x00000000>; - - /* This drives busses 0 to 0xf */ - bus-range = <0x0 0xf>; - - /* - * On Katmai, the following PCI-X interrupts signals - * have to be enabled via jumpers (only INTA is - * enabled per default): - * - * INTB: J3: 1-2 - * INTC: J2: 1-2 - * INTD: J1: 1-2 - */ - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = < - /* IDSEL 1 */ - 0x800 0x0 0x0 0x1 &UIC1 0x14 0x8 - 0x800 0x0 0x0 0x2 &UIC1 0x13 0x8 - 0x800 0x0 0x0 0x3 &UIC1 0x12 0x8 - 0x800 0x0 0x0 0x4 &UIC1 0x11 0x8 - >; - }; - - PCIE0: pciex@d00000000 { - device_type = "pci"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - compatible = "ibm,plb-pciex-440spe", "ibm,plb-pciex"; - primary; - port = <0x0>; /* port number */ - reg = <0x0000000d 0x00000000 0x20000000 /* Config space access */ - 0x0000000c 0x10000000 0x00001000>; /* Registers */ - dcr-reg = <0x100 0x020>; - sdr-base = <0x300>; - - /* Outbound ranges, one memory and one IO, - * later cannot be changed - */ - ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x00000000 0x00000000 0x80000000 - 0x01000000 0x00000000 0x00000000 0x0000000f 0x80000000 0x00000000 0x00010000>; - - /* Inbound 4GB range starting at 0 */ - dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x1 0x00000000>; - - /* This drives busses 0x10 to 0x1f */ - bus-range = <0x10 0x1f>; - - /* Legacy interrupts (note the weird polarity, the bridge seems - * to invert PCIe legacy interrupts). - * We are de-swizzling here because the numbers are actually for - * port of the root complex virtual P2P bridge. But I want - * to avoid putting a node for it in the tree, so the numbers - * below are basically de-swizzled numbers. - * The real slot is on idsel 0, so the swizzling is 1:1 - */ - interrupt-map-mask = <0x0 0x0 0x0 0x7>; - interrupt-map = < - 0x0 0x0 0x0 0x1 &UIC3 0x0 0x4 /* swizzled int A */ - 0x0 0x0 0x0 0x2 &UIC3 0x1 0x4 /* swizzled int B */ - 0x0 0x0 0x0 0x3 &UIC3 0x2 0x4 /* swizzled int C */ - 0x0 0x0 0x0 0x4 &UIC3 0x3 0x4 /* swizzled int D */>; - }; - - PCIE1: pciex@d20000000 { - device_type = "pci"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - compatible = "ibm,plb-pciex-440spe", "ibm,plb-pciex"; - primary; - port = <0x1>; /* port number */ - reg = <0x0000000d 0x20000000 0x20000000 /* Config space access */ - 0x0000000c 0x10001000 0x00001000>; /* Registers */ - dcr-reg = <0x120 0x020>; - sdr-base = <0x340>; - - /* Outbound ranges, one memory and one IO, - * later cannot be changed - */ - ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x80000000 0x00000000 0x80000000 - 0x01000000 0x00000000 0x00000000 0x0000000f 0x80010000 0x00000000 0x00010000>; - - /* Inbound 4GB range starting at 0 */ - dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x1 0x00000000>; - - /* This drives busses 0x20 to 0x2f */ - bus-range = <0x20 0x2f>; - - /* Legacy interrupts (note the weird polarity, the bridge seems - * to invert PCIe legacy interrupts). - * We are de-swizzling here because the numbers are actually for - * port of the root complex virtual P2P bridge. But I want - * to avoid putting a node for it in the tree, so the numbers - * below are basically de-swizzled numbers. - * The real slot is on idsel 0, so the swizzling is 1:1 - */ - interrupt-map-mask = <0x0 0x0 0x0 0x7>; - interrupt-map = < - 0x0 0x0 0x0 0x1 &UIC3 0x4 0x4 /* swizzled int A */ - 0x0 0x0 0x0 0x2 &UIC3 0x5 0x4 /* swizzled int B */ - 0x0 0x0 0x0 0x3 &UIC3 0x6 0x4 /* swizzled int C */ - 0x0 0x0 0x0 0x4 &UIC3 0x7 0x4 /* swizzled int D */>; - }; - - PCIE2: pciex@d40000000 { - device_type = "pci"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - compatible = "ibm,plb-pciex-440spe", "ibm,plb-pciex"; - primary; - port = <0x2>; /* port number */ - reg = <0x0000000d 0x40000000 0x20000000 /* Config space access */ - 0x0000000c 0x10002000 0x00001000>; /* Registers */ - dcr-reg = <0x140 0x020>; - sdr-base = <0x370>; - - /* Outbound ranges, one memory and one IO, - * later cannot be changed - */ - ranges = <0x02000000 0x00000000 0x80000000 0x0000000f 0x00000000 0x00000000 0x80000000 - 0x01000000 0x00000000 0x00000000 0x0000000f 0x80020000 0x00000000 0x00010000>; - - /* Inbound 4GB range starting at 0 */ - dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x1 0x00000000>; - - /* This drives busses 0x30 to 0x3f */ - bus-range = <0x30 0x3f>; - - /* Legacy interrupts (note the weird polarity, the bridge seems - * to invert PCIe legacy interrupts). - * We are de-swizzling here because the numbers are actually for - * port of the root complex virtual P2P bridge. But I want - * to avoid putting a node for it in the tree, so the numbers - * below are basically de-swizzled numbers. - * The real slot is on idsel 0, so the swizzling is 1:1 - */ - interrupt-map-mask = <0x0 0x0 0x0 0x7>; - interrupt-map = < - 0x0 0x0 0x0 0x1 &UIC3 0x8 0x4 /* swizzled int A */ - 0x0 0x0 0x0 0x2 &UIC3 0x9 0x4 /* swizzled int B */ - 0x0 0x0 0x0 0x3 &UIC3 0xa 0x4 /* swizzled int C */ - 0x0 0x0 0x0 0x4 &UIC3 0xb 0x4 /* swizzled int D */>; - }; - - MSI: ppc4xx-msi@400300000 { - compatible = "amcc,ppc4xx-msi", "ppc4xx-msi"; - reg = < 0x4 0x00300000 0x100>; - sdr-base = <0x3B0>; - msi-data = <0x00000000>; - msi-mask = <0x44440000>; - interrupt-count = <3>; - interrupts =<0 1 2 3>; - interrupt-parent = <&UIC0>; - #interrupt-cells = <1>; - #address-cells = <0>; - #size-cells = <0>; - interrupt-map = <0 &UIC0 0xC 1 - 1 &UIC0 0x0D 1 - 2 &UIC0 0x0E 1 - 3 &UIC0 0x0F 1>; - }; - - I2O: i2o@400100000 { - compatible = "ibm,i2o-440spe"; - reg = <0x00000004 0x00100000 0x100>; - dcr-reg = <0x060 0x020>; - }; - - DMA0: dma0@400100100 { - compatible = "ibm,dma-440spe"; - cell-index = <0>; - reg = <0x00000004 0x00100100 0x100>; - dcr-reg = <0x060 0x020>; - interrupt-parent = <&DMA0>; - interrupts = <0 1>; - #interrupt-cells = <1>; - #address-cells = <0>; - #size-cells = <0>; - interrupt-map = < - 0 &UIC0 0x14 4 - 1 &UIC1 0x16 4>; - }; - - DMA1: dma1@400100200 { - compatible = "ibm,dma-440spe"; - cell-index = <1>; - reg = <0x00000004 0x00100200 0x100>; - dcr-reg = <0x060 0x020>; - interrupt-parent = <&DMA1>; - interrupts = <0 1>; - #interrupt-cells = <1>; - #address-cells = <0>; - #size-cells = <0>; - interrupt-map = < - 0 &UIC0 0x16 4 - 1 &UIC1 0x16 4>; - }; - - xor-accel@400200000 { - compatible = "amcc,xor-accelerator"; - reg = <0x00000004 0x00200000 0x400>; - interrupt-parent = <&UIC1>; - interrupts = <0x1f 4>; - }; - }; - - chosen { - linux,stdout-path = "/plb/opb/serial@f0000200"; - }; -}; |