557 files changed, 0 insertions, 177414 deletions

diff --git a/ANDROID_3.4.5/arch/m68k/Kconfig b/ANDROID_3.4.5/arch/m68k/Kconfig
deleted file mode 100644
index d318c606..00000000
--- a/ANDROID_3.4.5/arch/m68k/Kconfig
+++ /dev/null
@@ -1,153 +0,0 @@
-config M68K
-	bool
-	default y
-	select HAVE_IDE
-	select HAVE_AOUT if MMU
-	select HAVE_GENERIC_HARDIRQS
-	select GENERIC_IRQ_SHOW
-	select ARCH_HAVE_NMI_SAFE_CMPXCHG if RMW_INSNS
-	select GENERIC_CPU_DEVICES
-	select FPU if MMU
-
-config RWSEM_GENERIC_SPINLOCK
-	bool
-	default y
-
-config RWSEM_XCHGADD_ALGORITHM
-	bool
-
-config ARCH_HAS_ILOG2_U32
-	bool
-
-config ARCH_HAS_ILOG2_U64
-	bool
-
-config GENERIC_CLOCKEVENTS
-	bool
-
-config GENERIC_GPIO
-	bool
-
-config GENERIC_HWEIGHT
-	bool
-	default y
-
-config GENERIC_CALIBRATE_DELAY
-	bool
-	default y
-
-config GENERIC_CSUM
-	bool
-
-config TIME_LOW_RES
-	bool
-	default y
-
-config ARCH_USES_GETTIMEOFFSET
-	def_bool MMU && !COLDFIRE
-
-config NO_IOPORT
-	def_bool y
-
-config NO_DMA
-	def_bool (MMU && SUN3) || (!MMU && !COLDFIRE)
-
-config ZONE_DMA
-	bool
-	default y
-
-config CPU_HAS_NO_BITFIELDS
-	bool
-
-config CPU_HAS_NO_MULDIV64
-	bool
-
-config CPU_HAS_ADDRESS_SPACES
-	bool
-
-config FPU
-	bool
-
-config HZ
-	int
-	default 1000 if CLEOPATRA
-	default 100
-
-source "init/Kconfig"
-
-source "kernel/Kconfig.freezer"
-
-config MMU
-	bool "MMU-based Paged Memory Management Support"
-	default y
-	select GENERIC_IOMAP
-	help
-	  Select if you want MMU-based virtualised addressing space
-	  support by paged memory management. If unsure, say 'Y'.
-
-config MMU_MOTOROLA
-	bool
-
-config MMU_COLDFIRE
-	bool
-
-config MMU_SUN3
-	bool
-	depends on MMU && !MMU_MOTOROLA && !MMU_COLDFIRE
-
-menu "Platform setup"
-
-source arch/m68k/Kconfig.cpu
-
-source arch/m68k/Kconfig.machine
-
-source arch/m68k/Kconfig.bus
-
-endmenu
-
-menu "Kernel Features"
-
-if COLDFIRE
-source "kernel/Kconfig.preempt"
-endif
-
-if !MMU || COLDFIRE
-source "kernel/time/Kconfig"
-endif
-
-source "mm/Kconfig"
-
-endmenu
-
-menu "Executable file formats"
-
-source "fs/Kconfig.binfmt"
-
-endmenu
-
-if !MMU
-menu "Power management options"
-
-config PM
-	bool "Power Management support"
-	help
-	  Support processor power management modes
-
-endmenu
-endif
-
-source "net/Kconfig"
-
-source "drivers/Kconfig"
-
-source "arch/m68k/Kconfig.devices"
-
-source "fs/Kconfig"
-
-source "arch/m68k/Kconfig.debug"
-
-source "security/Kconfig"
-
-source "crypto/Kconfig"
-
-source "lib/Kconfig"
diff --git a/ANDROID_3.4.5/arch/m68k/Kconfig.bus b/ANDROID_3.4.5/arch/m68k/Kconfig.bus
deleted file mode 100644
index 3adb4995..00000000
--- a/ANDROID_3.4.5/arch/m68k/Kconfig.bus
+++ /dev/null
@@ -1,64 +0,0 @@
-if MMU
-
-comment "Bus Support"
-
-config DIO
-	bool "DIO bus support"
-	depends on HP300
-	default y
-	help
-	  Say Y here to enable support for the "DIO" expansion bus used in
-	  HP300 machines. If you are using such a system you almost certainly
-	  want this.
-
-config NUBUS
-	bool
-	depends on MAC
-	default y
-
-config ZORRO
-	bool "Amiga Zorro (AutoConfig) bus support"
-	depends on AMIGA
-	help
-	  This enables support for the Zorro bus in the Amiga. If you have
-	  expansion cards in your Amiga that conform to the Amiga
-	  AutoConfig(tm) specification, say Y, otherwise N. Note that even
-	  expansion cards that do not fit in the Zorro slots but fit in e.g.
-	  the CPU slot may fall in this category, so you have to say Y to let
-	  Linux use these.
-
-config AMIGA_PCMCIA
-	bool "Amiga 1200/600 PCMCIA support (EXPERIMENTAL)"
-	depends on AMIGA && EXPERIMENTAL
-	help
-	  Include support in the kernel for pcmcia on Amiga 1200 and Amiga
-	  600. If you intend to use pcmcia cards say Y; otherwise say N.
-
-config ISA
-	bool
-	depends on Q40 || AMIGA_PCMCIA
-	default y
-	help
-	  Find out whether you have ISA slots on your motherboard.  ISA is the
-	  name of a bus system, i.e. the way the CPU talks to the other stuff
-	  inside your box.  Other bus systems are PCI, EISA, MicroChannel
-	  (MCA) or VESA.  ISA is an older system, now being displaced by PCI;
-	  newer boards don't support it.  If you have ISA, say Y, otherwise N.
-
-config GENERIC_ISA_DMA
-	def_bool ISA
-
-source "drivers/pci/Kconfig"
-
-source "drivers/zorro/Kconfig"
-
-endif
-
-if !MMU
-
-config ISA_DMA_API
-        def_bool !M5272
-
-source "drivers/pcmcia/Kconfig"
-
-endif
diff --git a/ANDROID_3.4.5/arch/m68k/Kconfig.cpu b/ANDROID_3.4.5/arch/m68k/Kconfig.cpu
deleted file mode 100644
index 8a9c7671..00000000
--- a/ANDROID_3.4.5/arch/m68k/Kconfig.cpu
+++ /dev/null
@@ -1,451 +0,0 @@
-comment "Processor Type"
-
-choice
-	prompt "CPU family support"
-	default M68KCLASSIC if MMU
-	default COLDFIRE if !MMU
-	help
-	  The Freescale (was Motorola) M68K family of processors implements
-	  the full 68000 processor instruction set.
-	  The Freescale ColdFire family of processors is a modern derivitive
-	  of the 68000 processor family. They are mainly targeted at embedded
-	  applications, and are all System-On-Chip (SOC) devices, as opposed
-	  to stand alone CPUs. They implement a subset of the original 68000
-	  processor instruction set.
-	  If you anticipate running this kernel on a computer with a classic
-	  MC68xxx processor, select M68KCLASSIC.
-	  If you anticipate running this kernel on a computer with a ColdFire
-	  processor, select COLDFIRE.
-
-config M68KCLASSIC
-	bool "Classic M68K CPU family support"
-
-config COLDFIRE
-	bool "Coldfire CPU family support"
-	select GENERIC_GPIO
-	select ARCH_REQUIRE_GPIOLIB
-	select CPU_HAS_NO_BITFIELDS
-	select CPU_HAS_NO_MULDIV64
-	select GENERIC_CSUM
-
-endchoice
-
-if M68KCLASSIC
-
-config M68000
-	bool
-	select CPU_HAS_NO_BITFIELDS
-	select CPU_HAS_NO_MULDIV64
-	select GENERIC_CSUM
-	help
-	  The Freescale (was Motorola) 68000 CPU is the first generation of
-	  the well known M68K family of processors. The CPU core as well as
-	  being available as a stand alone CPU was also used in many
-	  System-On-Chip devices (eg 68328, 68302, etc). It does not contain
-	  a paging MMU.
-
-config MCPU32
-	bool
-	select CPU_HAS_NO_BITFIELDS
-	help
-	  The Freescale (was then Motorola) CPU32 is a CPU core that is
-	  based on the 68020 processor. For the most part it is used in
-	  System-On-Chip parts, and does not contain a paging MMU.
-
-config M68020
-	bool "68020 support"
-	depends on MMU
-	select GENERIC_ATOMIC64
-	select CPU_HAS_ADDRESS_SPACES
-	help
-	  If you anticipate running this kernel on a computer with a MC68020
-	  processor, say Y. Otherwise, say N. Note that the 68020 requires a
-	  68851 MMU (Memory Management Unit) to run Linux/m68k, except on the
-	  Sun 3, which provides its own version.
-
-config M68030
-	bool "68030 support"
-	depends on MMU && !MMU_SUN3
-	select GENERIC_ATOMIC64
-	select CPU_HAS_ADDRESS_SPACES
-	help
-	  If you anticipate running this kernel on a computer with a MC68030
-	  processor, say Y. Otherwise, say N. Note that a MC68EC030 will not
-	  work, as it does not include an MMU (Memory Management Unit).
-
-config M68040
-	bool "68040 support"
-	depends on MMU && !MMU_SUN3
-	select GENERIC_ATOMIC64
-	select CPU_HAS_ADDRESS_SPACES
-	help
-	  If you anticipate running this kernel on a computer with a MC68LC040
-	  or MC68040 processor, say Y. Otherwise, say N. Note that an
-	  MC68EC040 will not work, as it does not include an MMU (Memory
-	  Management Unit).
-
-config M68060
-	bool "68060 support"
-	depends on MMU && !MMU_SUN3
-	select GENERIC_ATOMIC64
-	select CPU_HAS_ADDRESS_SPACES
-	help
-	  If you anticipate running this kernel on a computer with a MC68060
-	  processor, say Y. Otherwise, say N.
-
-config M68328
-	bool "MC68328"
-	depends on !MMU
-	select M68000
-	help
-	  Motorola 68328 processor support.
-
-config M68EZ328
-	bool "MC68EZ328"
-	depends on !MMU
-	select M68000
-	help
-	  Motorola 68EX328 processor support.
-
-config M68VZ328
-	bool "MC68VZ328"
-	depends on !MMU
-	select M68000
-	help
-	  Motorola 68VZ328 processor support.
-
-config M68360
-	bool "MC68360"
-	depends on !MMU
-	select MCPU32
-	help
-	  Motorola 68360 processor support.
-
-endif # M68KCLASSIC
-
-if COLDFIRE
-
-config M5206
-	bool "MCF5206"
-	depends on !MMU
-	select COLDFIRE_SW_A7
-	select HAVE_MBAR
-	help
-	  Motorola ColdFire 5206 processor support.
-
-config M5206e
-	bool "MCF5206e"
-	depends on !MMU
-	select COLDFIRE_SW_A7
-	select HAVE_MBAR
-	help
-	  Motorola ColdFire 5206e processor support.
-
-config M520x
-	bool "MCF520x"
-	depends on !MMU
-	select GENERIC_CLOCKEVENTS
-	select HAVE_CACHE_SPLIT
-	help
-	   Freescale Coldfire 5207/5208 processor support.
-
-config M523x
-	bool "MCF523x"
-	depends on !MMU
-	select GENERIC_CLOCKEVENTS
-	select HAVE_CACHE_SPLIT
-	select HAVE_IPSBAR
-	help
-	  Freescale Coldfire 5230/1/2/4/5 processor support
-
-config M5249
-	bool "MCF5249"
-	depends on !MMU
-	select COLDFIRE_SW_A7
-	select HAVE_MBAR
-	help
-	  Motorola ColdFire 5249 processor support.
-
-config M527x
-	bool
-
-config M5271
-	bool "MCF5271"
-	depends on !MMU
-	select M527x
-	select HAVE_CACHE_SPLIT
-	select HAVE_IPSBAR
-	select GENERIC_CLOCKEVENTS
-	help
-	  Freescale (Motorola) ColdFire 5270/5271 processor support.
-
-config M5272
-	bool "MCF5272"
-	depends on !MMU
-	select COLDFIRE_SW_A7
-	select HAVE_MBAR
-	help
-	  Motorola ColdFire 5272 processor support.
-
-config M5275
-	bool "MCF5275"
-	depends on !MMU
-	select M527x
-	select HAVE_CACHE_SPLIT
-	select HAVE_IPSBAR
-	select GENERIC_CLOCKEVENTS
-	help
-	  Freescale (Motorola) ColdFire 5274/5275 processor support.
-
-config M528x
-	bool "MCF528x"
-	depends on !MMU
-	select GENERIC_CLOCKEVENTS
-	select HAVE_CACHE_SPLIT
-	select HAVE_IPSBAR
-	help
-	  Motorola ColdFire 5280/5282 processor support.
-
-config M5307
-	bool "MCF5307"
-	depends on !MMU
-	select COLDFIRE_SW_A7
-	select HAVE_CACHE_CB
-	select HAVE_MBAR
-	help
-	  Motorola ColdFire 5307 processor support.
-
-config M532x
-	bool "MCF532x"
-	depends on !MMU
-	select HAVE_CACHE_CB
-	help
-	  Freescale (Motorola) ColdFire 532x processor support.
-
-config M5407
-	bool "MCF5407"
-	depends on !MMU
-	select COLDFIRE_SW_A7
-	select HAVE_CACHE_CB
-	select HAVE_MBAR
-	help
-	  Motorola ColdFire 5407 processor support.
-
-config M54xx
-	bool
-
-config M547x
-	bool "MCF547x"
-	select M54xx
-	select MMU_COLDFIRE if MMU
-	select HAVE_CACHE_CB
-	select HAVE_MBAR
-	help
-	  Freescale ColdFire 5470/5471/5472/5473/5474/5475 processor support.
-
-config M548x
-	bool "MCF548x"
-	select MMU_COLDFIRE if MMU
-	select M54xx
-	select HAVE_CACHE_CB
-	select HAVE_MBAR
-	help
-	  Freescale ColdFire 5480/5481/5482/5483/5484/5485 processor support.
-
-endif # COLDFIRE
-
-
-comment "Processor Specific Options"
-
-config M68KFPU_EMU
-	bool "Math emulation support (EXPERIMENTAL)"
-	depends on MMU
-	depends on EXPERIMENTAL
-	help
-	  At some point in the future, this will cause floating-point math
-	  instructions to be emulated by the kernel on machines that lack a
-	  floating-point math coprocessor.  Thrill-seekers and chronically
-	  sleep-deprived psychotic hacker types can say Y now, everyone else
-	  should probably wait a while.
-
-config M68KFPU_EMU_EXTRAPREC
-	bool "Math emulation extra precision"
-	depends on M68KFPU_EMU
-	help
-	  The fpu uses normally a few bit more during calculations for
-	  correct rounding, the emulator can (often) do the same but this
-	  extra calculation can cost quite some time, so you can disable
-	  it here. The emulator will then "only" calculate with a 64 bit
-	  mantissa and round slightly incorrect, what is more than enough
-	  for normal usage.
-
-config M68KFPU_EMU_ONLY
-	bool "Math emulation only kernel"
-	depends on M68KFPU_EMU
-	help
-	  This option prevents any floating-point instructions from being
-	  compiled into the kernel, thereby the kernel doesn't save any
-	  floating point context anymore during task switches, so this
-	  kernel will only be usable on machines without a floating-point
-	  math coprocessor. This makes the kernel a bit faster as no tests
-	  needs to be executed whether a floating-point instruction in the
-	  kernel should be executed or not.
-
-config ADVANCED
-	bool "Advanced configuration options"
-	depends on MMU
-	---help---
-	  This gives you access to some advanced options for the CPU. The
-	  defaults should be fine for most users, but these options may make
-	  it possible for you to improve performance somewhat if you know what
-	  you are doing.
-
-	  Note that the answer to this question won't directly affect the
-	  kernel: saying N will just cause the configurator to skip all
-	  the questions about these options.
-
-	  Most users should say N to this question.
-
-config RMW_INSNS
-	bool "Use read-modify-write instructions"
-	depends on ADVANCED
-	---help---
-	  This allows to use certain instructions that work with indivisible
-	  read-modify-write bus cycles. While this is faster than the
-	  workaround of disabling interrupts, it can conflict with DMA
-	  ( = direct memory access) on many Amiga systems, and it is also said
-	  to destabilize other machines. It is very likely that this will
-	  cause serious problems on any Amiga or Atari Medusa if set. The only
-	  configuration where it should work are 68030-based Ataris, where it
-	  apparently improves performance. But you've been warned! Unless you
-	  really know what you are doing, say N. Try Y only if you're quite
-	  adventurous.
-
-config SINGLE_MEMORY_CHUNK
-	bool "Use one physical chunk of memory only" if ADVANCED && !SUN3
-	depends on MMU
-	default y if SUN3
-	select NEED_MULTIPLE_NODES
-	help
-	  Ignore all but the first contiguous chunk of physical memory for VM
-	  purposes.  This will save a few bytes kernel size and may speed up
-	  some operations.  Say N if not sure.
-
-config ARCH_DISCONTIGMEM_ENABLE
-	def_bool MMU && !SINGLE_MEMORY_CHUNK
-
-config 060_WRITETHROUGH
-	bool "Use write-through caching for 68060 supervisor accesses"
-	depends on ADVANCED && M68060
-	---help---
-	  The 68060 generally uses copyback caching of recently accessed data.
-	  Copyback caching means that memory writes will be held in an on-chip
-	  cache and only written back to memory some time later.  Saying Y
-	  here will force supervisor (kernel) accesses to use writethrough
-	  caching.  Writethrough caching means that data is written to memory
-	  straight away, so that cache and memory data always agree.
-	  Writethrough caching is less efficient, but is needed for some
-	  drivers on 68060 based systems where the 68060 bus snooping signal
-	  is hardwired on.  The 53c710 SCSI driver is known to suffer from
-	  this problem.
-
-config M68K_L2_CACHE
-	bool
-	depends on MAC
-	default y
-
-config NODES_SHIFT
-	int
-	default "3"
-	depends on !SINGLE_MEMORY_CHUNK
-
-config FPU
-	bool
-
-config COLDFIRE_SW_A7
-	bool
-
-config HAVE_CACHE_SPLIT
-	bool
-
-config HAVE_CACHE_CB
-	bool
-
-config HAVE_MBAR
-	bool
-
-config HAVE_IPSBAR
-	bool
-
-config CLOCK_SET
-	bool "Enable setting the CPU clock frequency"
-	depends on COLDFIRE
-	default n
-	help
-	  On some CPU's you do not need to know what the core CPU clock
-	  frequency is. On these you can disable clock setting. On some
-	  traditional 68K parts, and on all ColdFire parts you need to set
-	  the appropriate CPU clock frequency. On these devices many of the
-	  onboard peripherals derive their timing from the master CPU clock
-	  frequency.
-
-config CLOCK_FREQ
-	int "Set the core clock frequency"
-	default "66666666"
-	depends on CLOCK_SET
-	help
-	  Define the CPU clock frequency in use. This is the core clock
-	  frequency, it may or may not be the same as the external clock
-	  crystal fitted to your board. Some processors have an internal
-	  PLL and can have their frequency programmed at run time, others
-	  use internal dividers. In general the kernel won't setup a PLL
-	  if it is fitted (there are some exceptions). This value will be
-	  specific to the exact CPU that you are using.
-
-config OLDMASK
-	bool "Old mask 5307 (1H55J) silicon"
-	depends on M5307
-	help
-	  Build support for the older revision ColdFire 5307 silicon.
-	  Specifically this is the 1H55J mask revision.
-
-if HAVE_CACHE_SPLIT
-choice
-	prompt "Split Cache Configuration"
-	default CACHE_I
-
-config CACHE_I
-	bool "Instruction"
-	help
-	  Use all of the ColdFire CPU cache memory as an instruction cache.
-
-config CACHE_D
-	bool "Data"
-	help
-	  Use all of the ColdFire CPU cache memory as a data cache.
-
-config CACHE_BOTH
-	bool "Both"
-	help
-	  Split the ColdFire CPU cache, and use half as an instruction cache
-	  and half as a data cache.
-endchoice
-endif
-
-if HAVE_CACHE_CB
-choice
-	prompt "Data cache mode"
-	default CACHE_WRITETHRU
-
-config CACHE_WRITETHRU
-	bool "Write-through"
-	help
-	  The ColdFire CPU cache is set into Write-through mode.
-
-config CACHE_COPYBACK
-	bool "Copy-back"
-	help
-	  The ColdFire CPU cache is set into Copy-back mode.
-endchoice
-endif
-
diff --git a/ANDROID_3.4.5/arch/m68k/Kconfig.debug b/ANDROID_3.4.5/arch/m68k/Kconfig.debug
deleted file mode 100644
index 87233ace..00000000
--- a/ANDROID_3.4.5/arch/m68k/Kconfig.debug
+++ /dev/null
@@ -1,50 +0,0 @@
-menu "Kernel hacking"
-
-source "lib/Kconfig.debug"
-
-config BOOTPARAM
-	bool 'Compiled-in Kernel Boot Parameter'
-
-config BOOTPARAM_STRING
-	string 'Kernel Boot Parameter'
-	default 'console=ttyS0,19200'
-	depends on BOOTPARAM
-
-config EARLY_PRINTK
-	bool "Early printk" if EMBEDDED
-	depends on MVME16x || MAC
-	default y
-	help
-          Write kernel log output directly to a serial port.
-
-          This is useful for kernel debugging when your machine crashes very
-          early before the console code is initialized.
-          You should normally say N here, unless you want to debug such a crash.
-
-if !MMU
-
-config FULLDEBUG
-	bool "Full Symbolic/Source Debugging support"
-	help
-	  Enable debugging symbols on kernel build.
-
-config HIGHPROFILE
-	bool "Use fast second timer for profiling"
-	depends on COLDFIRE
-	help
-	  Use a fast secondary clock to produce profiling information.
-
-config NO_KERNEL_MSG
-	bool "Suppress Kernel BUG Messages"
-	help
-	  Do not output any debug BUG messages within the kernel.
-
-config BDM_DISABLE
-	bool "Disable BDM signals"
-	depends on (EXPERIMENTAL && COLDFIRE)
-	help
-	  Disable the ColdFire CPU's BDM signals.
-
-endif
-
-endmenu
diff --git a/ANDROID_3.4.5/arch/m68k/Kconfig.devices b/ANDROID_3.4.5/arch/m68k/Kconfig.devices
deleted file mode 100644
index 04a3d9be..00000000
--- a/ANDROID_3.4.5/arch/m68k/Kconfig.devices
+++ /dev/null
@@ -1,120 +0,0 @@
-if MMU
-
-config ARCH_MAY_HAVE_PC_FDC
-	bool
-	depends on BROKEN && (Q40 || SUN3X)
-	default y
-
-menu "Platform devices"
-
-config HEARTBEAT
-	bool "Use power LED as a heartbeat" if AMIGA || APOLLO || ATARI || Q40
-	default y if !AMIGA && !APOLLO && !ATARI && !Q40 && HP300
-	help
-	  Use the power-on LED on your machine as a load meter.  The exact
-	  behavior is platform-dependent, but normally the flash frequency is
-	  a hyperbolic function of the 5-minute load average.
-
-# We have a dedicated heartbeat LED. :-)
-config PROC_HARDWARE
-	bool "/proc/hardware support"
-	help
-	  Say Y here to support the /proc/hardware file, which gives you
-	  access to information about the machine you're running on,
-	  including the model, CPU, MMU, clock speed, BogoMIPS rating,
-	  and memory size.
-
-config NATFEAT
-	bool "ARAnyM emulator support"
-	depends on ATARI
-	help
-	  This option enables support for ARAnyM native features, such as
-	  access to a disk image as /dev/hda.
-
-config NFBLOCK
-	tristate "NatFeat block device support"
-	depends on BLOCK && NATFEAT
-	help
-	  Say Y to include support for the ARAnyM NatFeat block device
-	  which allows direct access to the hard drives without using
-	  the hardware emulation.
-
-config NFCON
-	tristate "NatFeat console driver"
-	depends on NATFEAT
-	help
-	  Say Y to include support for the ARAnyM NatFeat console driver
-	  which allows the console output to be redirected to the stderr
-	  output of ARAnyM.
-
-config NFETH
-	tristate "NatFeat Ethernet support"
-	depends on ETHERNET && NATFEAT
-	help
-	  Say Y to include support for the ARAnyM NatFeat network device
-	  which will emulate a regular ethernet device while presenting an
-	  ethertap device to the host system.
-
-endmenu
-
-menu "Character devices"
-
-config ATARI_DSP56K
-	tristate "Atari DSP56k support (EXPERIMENTAL)"
-	depends on ATARI && EXPERIMENTAL
-	help
-	  If you want to be able to use the DSP56001 in Falcons, say Y. This
-	  driver is still experimental, and if you don't know what it is, or
-	  if you don't have this processor, just say N.
-
-	  To compile this driver as a module, choose M here.
-
-config AMIGA_BUILTIN_SERIAL
-	tristate "Amiga builtin serial support"
-	depends on AMIGA
-	help
-	  If you want to use your Amiga's built-in serial port in Linux,
-	  answer Y.
-
-	  To compile this driver as a module, choose M here.
-
-config HPDCA
-	tristate "HP DCA serial support"
-	depends on DIO && SERIAL_8250
-	help
-	  If you want to use the internal "DCA" serial ports on an HP300
-	  machine, say Y here.
-
-config HPAPCI
-	tristate "HP APCI serial support"
-	depends on HP300 && SERIAL_8250 && EXPERIMENTAL
-	help
-	  If you want to use the internal "APCI" serial ports on an HP400
-	  machine, say Y here.
-
-config SERIAL_CONSOLE
-	bool "Support for serial port console"
-	depends on AMIGA_BUILTIN_SERIAL=y
-	---help---
-	  If you say Y here, it will be possible to use a serial port as the
-	  system console (the system console is the device which receives all
-	  kernel messages and warnings and which allows logins in single user
-	  mode). This could be useful if some terminal or printer is connected
-	  to that serial port.
-
-	  Even if you say Y here, the currently visible virtual console
-	  (/dev/tty0) will still be used as the system console by default, but
-	  you can alter that using a kernel command line option such as
-	  "console=ttyS1". (Try "man bootparam" or see the documentation of
-	  your boot loader about how to pass options to the kernel at boot
-	  time.)
-
-	  If you don't have a graphical console and you say Y here, the
-	  kernel will automatically use the first serial line, /dev/ttyS0, as
-	  system console.
-
-	  If unsure, say N.
-
-endmenu
-
-endif
diff --git a/ANDROID_3.4.5/arch/m68k/Kconfig.machine b/ANDROID_3.4.5/arch/m68k/Kconfig.machine
deleted file mode 100644
index 7cdf6b01..00000000
--- a/ANDROID_3.4.5/arch/m68k/Kconfig.machine
+++ /dev/null
@@ -1,587 +0,0 @@
-comment "Machine Types"
-
-if M68KCLASSIC
-
-config AMIGA
-	bool "Amiga support"
-	depends on MMU
-	select MMU_MOTOROLA if MMU
-	help
-	  This option enables support for the Amiga series of computers. If
-	  you plan to use this kernel on an Amiga, say Y here and browse the
-	  material available in <file:Documentation/m68k>; otherwise say N.
-
-config ATARI
-	bool "Atari support"
-	depends on MMU
-	select MMU_MOTOROLA if MMU
-	help
-	  This option enables support for the 68000-based Atari series of
-	  computers (including the TT, Falcon and Medusa). If you plan to use
-	  this kernel on an Atari, say Y here and browse the material
-	  available in <file:Documentation/m68k>; otherwise say N.
-
-config MAC
-	bool "Macintosh support"
-	depends on MMU
-	select MMU_MOTOROLA if MMU
-	help
-	  This option enables support for the Apple Macintosh series of
-	  computers (yes, there is experimental support now, at least for part
-	  of the series).
-
-	  Say N unless you're willing to code the remaining necessary support.
-	  ;)
-
-config APOLLO
-	bool "Apollo support"
-	depends on MMU
-	select MMU_MOTOROLA if MMU
-	help
-	  Say Y here if you want to run Linux on an MC680x0-based Apollo
-	  Domain workstation such as the DN3500.
-
-config VME
-	bool "VME (Motorola and BVM) support"
-	depends on MMU
-	select MMU_MOTOROLA if MMU
-	help
-	  Say Y here if you want to build a kernel for a 680x0 based VME
-	  board.  Boards currently supported include Motorola boards MVME147,
-	  MVME162, MVME166, MVME167, MVME172, and MVME177.  BVME4000 and
-	  BVME6000 boards from BVM Ltd are also supported.
-
-config MVME147
-	bool "MVME147 support"
-	depends on MMU
-	depends on VME
-	help
-	  Say Y to include support for early Motorola VME boards.  This will
-	  build a kernel which can run on MVME147 single-board computers.  If
-	  you select this option you will have to select the appropriate
-	  drivers for SCSI, Ethernet and serial ports later on.
-
-config MVME16x
-	bool "MVME162, 166 and 167 support"
-	depends on MMU
-	depends on VME
-	help
-	  Say Y to include support for Motorola VME boards.  This will build a
-	  kernel which can run on MVME162, MVME166, MVME167, MVME172, and
-	  MVME177 boards.  If you select this option you will have to select
-	  the appropriate drivers for SCSI, Ethernet and serial ports later
-	  on.
-
-config BVME6000
-	bool "BVME4000 and BVME6000 support"
-	depends on MMU
-	depends on VME
-	help
-	  Say Y to include support for VME boards from BVM Ltd.  This will
-	  build a kernel which can run on BVME4000 and BVME6000 boards.  If
-	  you select this option you will have to select the appropriate
-	  drivers for SCSI, Ethernet and serial ports later on.
-
-config HP300
-	bool "HP9000/300 and HP9000/400 support"
-	depends on MMU
-	select MMU_MOTOROLA if MMU
-	help
-	  This option enables support for the HP9000/300 and HP9000/400 series
-	  of workstations. Support for these machines is still somewhat
-	  experimental. If you plan to try to use the kernel on such a machine
-	  say Y here.
-	  Everybody else says N.
-
-config SUN3X
-	bool "Sun3x support"
-	depends on MMU
-	select MMU_MOTOROLA if MMU
-	select M68030
-	help
-	  This option enables support for the Sun 3x series of workstations.
-	  Be warned that this support is very experimental.
-	  Note that Sun 3x kernels are not compatible with Sun 3 hardware.
-	  General Linux information on the Sun 3x series (now discontinued)
-	  is at <http://www.angelfire.com/ca2/tech68k/sun3.html>.
-
-	  If you don't want to compile a kernel for a Sun 3x, say N.
-
-config Q40
-	bool "Q40/Q60 support"
-	depends on MMU
-	select MMU_MOTOROLA if MMU
-	help
-	  The Q40 is a Motorola 68040-based successor to the Sinclair QL
-	  manufactured in Germany.  There is an official Q40 home page at
-	  <http://www.q40.de/>.  This option enables support for the Q40 and
-	  Q60. Select your CPU below.  For 68LC060 don't forget to enable FPU
-	  emulation.
-
-config SUN3
-	bool "Sun3 support"
-	depends on MMU
-	depends on !MMU_MOTOROLA
-	select MMU_SUN3 if MMU
-	select M68020
-	help
-	  This option enables support for the Sun 3 series of workstations
-	  (3/50, 3/60, 3/1xx, 3/2xx systems). Enabling this option requires
-	  that all other hardware types must be disabled, as Sun 3 kernels
-	  are incompatible with all other m68k targets (including Sun 3x!).
-
-	  If you don't want to compile a kernel exclusively for a Sun 3, say N.
-
-endif # M68KCLASSIC
-
-config PILOT
-	bool
-
-config PILOT3
-	bool "Pilot 1000/5000, PalmPilot Personal/Pro, or PalmIII support"
-	depends on M68328
-	select PILOT
-	help
-	  Support for the Palm Pilot 1000/5000, Personal/Pro and PalmIII.
-
-config XCOPILOT_BUGS
-	bool "(X)Copilot support"
-	depends on PILOT3
-	help
-	  Support the bugs of Xcopilot.
-
-config UC5272
-	bool "Arcturus Networks uC5272 dimm board support"
-	depends on M5272
-	help
-	  Support for the Arcturus Networks uC5272 dimm board.
-
-config UC5282
-	bool "Arcturus Networks uC5282 board support"
-	depends on M528x
-	help
-	  Support for the Arcturus Networks uC5282 dimm board.
-
-config UCSIMM
-	bool "uCsimm module support"
-	depends on M68EZ328
-	help
-	  Support for the Arcturus Networks uCsimm module.
-
-config UCDIMM
-	bool "uDsimm module support"
-	depends on M68VZ328
-	help
-	  Support for the Arcturus Networks uDsimm module.
-
-config DRAGEN2
-	bool "DragenEngine II board support"
-	depends on M68VZ328
-	help
-	  Support for the DragenEngine II board.
-
-config DIRECT_IO_ACCESS
-	bool "Allow user to access IO directly"
-	depends on (UCSIMM || UCDIMM || DRAGEN2)
-	help
-	  Disable the CPU internal registers protection in user mode,
-	  to allow a user application to read/write them.
-
-config INIT_LCD
-	bool "Initialize LCD"
-	depends on (UCSIMM || UCDIMM || DRAGEN2)
-	help
-	  Initialize the LCD controller of the 68x328 processor.
-
-config MEMORY_RESERVE
-	int "Memory reservation (MiB)"
-	depends on (UCSIMM || UCDIMM)
-	help
-	  Reserve certain memory regions on 68x328 based boards.
-
-config UCQUICC
-	bool "Lineo uCquicc board support"
-	depends on M68360
-	help
-	  Support for the Lineo uCquicc board.
-
-config ARNEWSH
-	bool
-
-config ARN5206
-	bool "Arnewsh 5206 board support"
-	depends on M5206
-	select ARNEWSH
-	help
-	  Support for the Arnewsh 5206 board.
-
-config FREESCALE
-	bool
-
-config M5206eC3
-	bool "Motorola M5206eC3 board support"
-	depends on M5206e
-	select FREESCALE
-	help
-	  Support for the Motorola M5206eC3 board.
-
-config ELITE
-	bool "Motorola M5206eLITE board support"
-	depends on M5206e
-	help
-	  Support for the Motorola M5206eLITE board.
-
-config M5208EVB
-	bool "Freescale M5208EVB board support"
-	depends on M520x
-	select FREESCALE
-	help
-	  Support for the Freescale Coldfire M5208EVB.
-
-config M5235EVB
-	bool "Freescale M5235EVB support"
-	depends on M523x
-	select FREESCALE
-	help
-	  Support for the Freescale M5235EVB board.
-
-config M5249C3
-	bool "Motorola M5249C3 board support"
-	depends on M5249
-	select FREESCALE
-	help
-	  Support for the Motorola M5249C3 board.
-
-config M5271EVB
-	bool "Freescale (Motorola) M5271EVB board support"
-	depends on M5271
-	select FREESCALE
-	help
-	  Support for the Freescale (Motorola) M5271EVB board.
-
-config M5275EVB
-	bool "Freescale (Motorola) M5275EVB board support"
-	depends on M5275
-	select FREESCALE
-	help
-	  Support for the Freescale (Motorola) M5275EVB board.
-
-config M5272C3
-	bool "Motorola M5272C3 board support"
-	depends on M5272
-	select FREESCALE
-	help
-	  Support for the Motorola M5272C3 board.
-
-config senTec
-	bool
-
-config COBRA5272
-	bool "senTec COBRA5272 board support"
-	depends on M5272
-	select senTec
-	help
-	  Support for the senTec COBRA5272 board.
-
-config AVNET
-	bool
-
-config AVNET5282
-	bool "Avnet 5282 board support"
-	depends on M528x
-	select AVNET
-	help
-	  Support for the Avnet 5282 board.
-
-config M5282EVB
-	bool "Motorola M5282EVB board support"
-	depends on M528x
-	select FREESCALE
-	help
-	  Support for the Motorola M5282EVB board.
-
-config COBRA5282
-	bool "senTec COBRA5282 board support"
-	depends on M528x
-	select senTec
-	help
-	  Support for the senTec COBRA5282 board.
-
-config SOM5282EM
-	bool "EMAC.Inc SOM5282EM board support"
-	depends on M528x
-	select EMAC_INC
-	help
-	  Support for the EMAC.Inc SOM5282EM module.
-
-config WILDFIRE
-	bool "Intec Automation Inc. WildFire board support"
-	depends on M528x
-	help
-	  Support for the Intec Automation Inc. WildFire.
-
-config WILDFIREMOD
-	bool "Intec Automation Inc. WildFire module support"
-	depends on M528x
-	help
-	  Support for the Intec Automation Inc. WildFire module.
-
-config ARN5307
-	bool "Arnewsh 5307 board support"
-	depends on M5307
-	select ARNEWSH
-	help
-	  Support for the Arnewsh 5307 board.
-
-config M5307C3
-	bool "Motorola M5307C3 board support"
-	depends on M5307
-	select FREESCALE
-	help
-	  Support for the Motorola M5307C3 board.
-
-config SECUREEDGEMP3
-	bool "SnapGear SecureEdge/MP3 platform support"
-	depends on M5307
-	help
-	  Support for the SnapGear SecureEdge/MP3 platform.
-
-config M5329EVB
-	bool "Freescale (Motorola) M5329EVB board support"
-	depends on M532x
-	select FREESCALE
-	help
-	  Support for the Freescale (Motorola) M5329EVB board.
-
-config COBRA5329
-	bool "senTec COBRA5329 board support"
-	depends on M532x
-	help
-	  Support for the senTec COBRA5329 board.
-
-config M5407C3
-	bool "Motorola M5407C3 board support"
-	depends on M5407
-	select FREESCALE
-	help
-	  Support for the Motorola M5407C3 board.
-
-config FIREBEE
-	bool "FireBee board support"
-	depends on M547x
-	help
-	  Support for the FireBee ColdFire 5475 based board.
-
-config CLEOPATRA
-	bool "Feith CLEOPATRA board support"
-	depends on (M5307 || M5407)
-	help
-	  Support for the Feith Cleopatra boards.
-
-config CANCam
-	bool "Feith CANCam board support"
-	depends on M5272
-	help
-	  Support for the Feith CANCam board.
-
-config SCALES
-	bool "Feith SCALES board support"
-	depends on M5272
-	help
-	  Support for the Feith SCALES board.
-
-config NETtel
-	bool "SecureEdge/NETtel board support"
-	depends on (M5206e || M5272 || M5307)
-	help
-	  Support for the SnapGear NETtel/SecureEdge/SnapGear boards.
-
-config SNAPGEAR
-	bool "SnapGear router board support"
-	depends on NETtel
-	help
-	  Special additional support for SnapGear router boards.
-
-config SNEHA
-	bool
-
-config CPU16B
-	bool "Sneha Technologies S.L. Sarasvati board support"
-	depends on M5272
-	select SNEHA
-	help
-	  Support for the SNEHA CPU16B board.
-
-config MOD5272
-	bool "Netburner MOD-5272 board support"
-	depends on M5272
-	help
-	  Support for the Netburner MOD-5272 board.
-
-config SAVANT
-	bool
-
-config SAVANTrosie1
-	bool "Savant Rosie1 board support"
-	depends on M523x
-	select SAVANT
-	help
-	  Support for the Savant Rosie1 board.
-
-
-if !MMU || COLDFIRE
-
-comment "Machine Options"
-
-config UBOOT
-	bool "Support for U-Boot command line parameters"
-	help
-	  If you say Y here kernel will try to collect command
-	  line parameters from the initial u-boot stack.
-	default n
-
-config 4KSTACKS
-	bool "Use 4Kb for kernel stacks instead of 8Kb"
-	default y
-	help
-	  If you say Y here the kernel will use a 4Kb stacksize for the
-	  kernel stack attached to each process/thread. This facilitates
-	  running more threads on a system and also reduces the pressure
-	  on the VM subsystem for higher order allocations.
-
-comment "RAM configuration"
-
-config RAMBASE
-	hex "Address of the base of RAM"
-	default "0"
-	help
-	  Define the address that RAM starts at. On many platforms this is
-	  0, the base of the address space. And this is the default. Some
-	  platforms choose to setup their RAM at other addresses within the
-	  processor address space.
-
-config RAMSIZE
-	hex "Size of RAM (in bytes), or 0 for automatic"
-	default "0x400000"
-	help
-	  Define the size of the system RAM. If you select 0 then the
-	  kernel will try to probe the RAM size at runtime. This is not
-	  supported on all CPU types.
-
-config VECTORBASE
-	hex "Address of the base of system vectors"
-	default "0"
-	help
-	  Define the address of the system vectors. Commonly this is
-	  put at the start of RAM, but it doesn't have to be. On ColdFire
-	  platforms this address is programmed into the VBR register, thus
-	  actually setting the address to use.
-
-config MBAR
-	hex "Address of the MBAR (internal peripherals)"
-	default "0x10000000"
-	depends on HAVE_MBAR
-	help
-	  Define the address of the internal system peripherals. This value
-	  is set in the processors MBAR register. This is generally setup by
-	  the boot loader, and will not be written by the kernel. By far most
-	  ColdFire boards use the default 0x10000000 value, so if unsure then
-	  use this.
-
-config IPSBAR
-	hex "Address of the IPSBAR (internal peripherals)"
-	default "0x40000000"
-	depends on HAVE_IPSBAR
-	help
-	  Define the address of the internal system peripherals. This value
-	  is set in the processors IPSBAR register. This is generally setup by
-	  the boot loader, and will not be written by the kernel. By far most
-	  ColdFire boards use the default 0x40000000 value, so if unsure then
-	  use this.
-
-config KERNELBASE
-	hex "Address of the base of kernel code"
-	default "0x400"
-	help
-	  Typically on m68k systems the kernel will not start at the base
-	  of RAM, but usually some small offset from it. Define the start
-	  address of the kernel here. The most common setup will have the
-	  processor vectors at the base of RAM and then the start of the
-	  kernel. On some platforms some RAM is reserved for boot loaders
-	  and the kernel starts after that. The 0x400 default was based on
-	  a system with the RAM based at address 0, and leaving enough room
-	  for the theoretical maximum number of 256 vectors.
-
-comment "ROM configuration"
-
-config ROM
-	bool "Specify ROM linker regions"
-	default n
-	help
-	  Define a ROM region for the linker script. This creates a kernel
-	  that can be stored in flash, with possibly the text, and data
-	  regions being copied out to RAM at startup.
-
-config ROMBASE
-	hex "Address of the base of ROM device"
-	default "0"
-	depends on ROM
-	help
-	  Define the address that the ROM region starts at. Some platforms
-	  use this to set their chip select region accordingly for the boot
-	  device.
-
-config ROMVEC
-	hex "Address of the base of the ROM vectors"
-	default "0"
-	depends on ROM
-	help
-	  This is almost always the same as the base of the ROM. Since on all
-	  68000 type variants the vectors are at the base of the boot device
-	  on system startup.
-
-config ROMVECSIZE
-	hex "Size of ROM vector region (in bytes)"
-	default "0x400"
-	depends on ROM
-	help
-	  Define the size of the vector region in ROM. For most 68000
-	  variants this would be 0x400 bytes in size. Set to 0 if you do
-	  not want a vector region at the start of the ROM.
-
-config ROMSTART
-	hex "Address of the base of system image in ROM"
-	default "0x400"
-	depends on ROM
-	help
-	  Define the start address of the system image in ROM. Commonly this
-	  is strait after the ROM vectors.
-
-config ROMSIZE
-	hex "Size of the ROM device"
-	default "0x100000"
-	depends on ROM
-	help
-	  Size of the ROM device. On some platforms this is used to setup
-	  the chip select that controls the boot ROM device.
-
-choice
-	prompt "Kernel executes from"
-	---help---
-	  Choose the memory type that the kernel will be running in.
-
-config RAMKERNEL
-	bool "RAM"
-	help
-	  The kernel will be resident in RAM when running.
-
-config ROMKERNEL
-	bool "ROM"
-	help
-	  The kernel will be resident in FLASH/ROM when running. This is
-	  often referred to as Execute-in-Place (XIP), since the kernel
-	  code executes from the position it is stored in the FLASH/ROM.
-
-endchoice
-
-endif
diff --git a/ANDROID_3.4.5/arch/m68k/Makefile b/ANDROID_3.4.5/arch/m68k/Makefile
deleted file mode 100644
index cf318f20..00000000
--- a/ANDROID_3.4.5/arch/m68k/Makefile
+++ /dev/null
@@ -1,171 +0,0 @@
-#
-# m68k/Makefile
-#
-# This file is included by the global makefile so that you can add your own
-# architecture-specific flags and dependencies. Remember to do have actions
-# for "archclean" and "archdep" for cleaning up and making dependencies for
-# this architecture
-#
-# This file is subject to the terms and conditions of the GNU General Public
-# License.  See the file "COPYING" in the main directory of this archive
-# for more details.
-#
-# Copyright (C) 1994 by Hamish Macdonald
-# Copyright (C) 2002,2011 Greg Ungerer <gerg@snapgear.com>
-#
-
-KBUILD_DEFCONFIG := multi_defconfig
-
-#
-#	Enable processor type. Ordering of these is important - we want to
-#	use the minimum processor type of the range we support. The logic
-#	for 680x0 will only allow use of the -m68060 or -m68040 if no other
-#	680x0 type is specified - and no option is specified for 68030 or
-#	68020. The other m68k/ColdFire types always specify some type of
-#	compiler cpu type flag.
-#
-ifndef CONFIG_M68040
-cpuflags-$(CONFIG_M68060)	:= -m68060
-endif
-ifndef CONFIG_M68060
-cpuflags-$(CONFIG_M68040)	:= -m68040
-endif
-cpuflags-$(CONFIG_M68030)	:=
-cpuflags-$(CONFIG_M68020)	:=
-cpuflags-$(CONFIG_M68360)	:= -m68332
-cpuflags-$(CONFIG_M68000)	:= -m68000
-cpuflags-$(CONFIG_M54xx)	:= $(call cc-option,-mcpu=5475,-m5200)
-cpuflags-$(CONFIG_M5407)	:= $(call cc-option,-mcpu=5407,-m5200)
-cpuflags-$(CONFIG_M532x)	:= $(call cc-option,-mcpu=532x,-m5307)
-cpuflags-$(CONFIG_M5307)	:= $(call cc-option,-mcpu=5307,-m5200)
-cpuflags-$(CONFIG_M528x)	:= $(call cc-option,-mcpu=528x,-m5307)
-cpuflags-$(CONFIG_M5275)	:= $(call cc-option,-mcpu=5275,-m5307)
-cpuflags-$(CONFIG_M5272)	:= $(call cc-option,-mcpu=5272,-m5307)
-cpuflags-$(CONFIG_M5271)	:= $(call cc-option,-mcpu=5271,-m5307)
-cpuflags-$(CONFIG_M523x)	:= $(call cc-option,-mcpu=523x,-m5307)
-cpuflags-$(CONFIG_M5249)	:= $(call cc-option,-mcpu=5249,-m5200)
-cpuflags-$(CONFIG_M520x)	:= $(call cc-option,-mcpu=5208,-m5200)
-cpuflags-$(CONFIG_M5206e)	:= $(call cc-option,-mcpu=5206e,-m5200)
-cpuflags-$(CONFIG_M5206)	:= $(call cc-option,-mcpu=5206,-m5200)
-
-KBUILD_AFLAGS += $(cpuflags-y)
-KBUILD_CFLAGS += $(cpuflags-y) -pipe
-ifdef CONFIG_MMU
-# without -fno-strength-reduce the 53c7xx.c driver fails ;-(
-KBUILD_CFLAGS += -fno-strength-reduce -ffixed-a2
-else
-# we can use a m68k-linux-gcc toolchain with these in place
-KBUILD_CFLAGS += -DUTS_SYSNAME=\"uClinux\"
-KBUILD_CFLAGS += -D__uClinux__
-KBUILD_AFLAGS += -D__uClinux__
-endif
-
-LDFLAGS := -m m68kelf
-KBUILD_LDFLAGS_MODULE += -T $(srctree)/arch/m68k/kernel/module.lds
-ifneq ($(SUBARCH),$(ARCH))
-	ifeq ($(CROSS_COMPILE),)
-		CROSS_COMPILE := $(call cc-cross-prefix, \
-			m68k-linux-gnu- m68k-linux- m68k-unknown-linux-gnu-)
-	endif
-endif
-
-ifdef CONFIG_SUN3
-LDFLAGS_vmlinux = -N
-endif
-
-CHECKFLAGS += -D__mc68000__
-
-
-ifdef CONFIG_KGDB
-# If configured for kgdb support, include debugging infos and keep the
-# frame pointer
-KBUILD_CFLAGS := $(subst -fomit-frame-pointer,,$(KBUILD_CFLAGS)) -g
-endif
-
-#
-# Select the assembler head startup code. Order is important. The default
-# head code is first, processor specific selections can override it after.
-#
-head-y				:= arch/m68k/kernel/head.o
-head-$(CONFIG_SUN3)		:= arch/m68k/kernel/sun3-head.o
-head-$(CONFIG_M68360)		:= arch/m68k/platform/68360/head.o
-head-$(CONFIG_M68000)		:= arch/m68k/platform/68328/head.o
-head-$(CONFIG_COLDFIRE)		:= arch/m68k/platform/coldfire/head.o
-
-core-y				+= arch/m68k/kernel/	arch/m68k/mm/
-libs-y				+= arch/m68k/lib/
-
-core-$(CONFIG_Q40)		+= arch/m68k/q40/
-core-$(CONFIG_AMIGA)		+= arch/m68k/amiga/
-core-$(CONFIG_ATARI)		+= arch/m68k/atari/
-core-$(CONFIG_MAC)		+= arch/m68k/mac/
-core-$(CONFIG_HP300)		+= arch/m68k/hp300/
-core-$(CONFIG_APOLLO)		+= arch/m68k/apollo/
-core-$(CONFIG_MVME147)		+= arch/m68k/mvme147/
-core-$(CONFIG_MVME16x)		+= arch/m68k/mvme16x/
-core-$(CONFIG_BVME6000)		+= arch/m68k/bvme6000/
-core-$(CONFIG_SUN3X)		+= arch/m68k/sun3x/	arch/m68k/sun3/
-core-$(CONFIG_SUN3)		+= arch/m68k/sun3/	arch/m68k/sun3/prom/
-core-$(CONFIG_NATFEAT)		+= arch/m68k/emu/
-core-$(CONFIG_M68040)		+= arch/m68k/fpsp040/
-core-$(CONFIG_M68060)		+= arch/m68k/ifpsp060/
-core-$(CONFIG_M68KFPU_EMU)	+= arch/m68k/math-emu/
-core-$(CONFIG_M68360)		+= arch/m68k/platform/68360/
-core-$(CONFIG_M68000)		+= arch/m68k/platform/68328/
-core-$(CONFIG_M68EZ328)		+= arch/m68k/platform/68EZ328/
-core-$(CONFIG_M68VZ328)		+= arch/m68k/platform/68VZ328/
-core-$(CONFIG_COLDFIRE)		+= arch/m68k/platform/coldfire/
-core-$(CONFIG_M5206)		+= arch/m68k/platform/5206/
-core-$(CONFIG_M5206e)		+= arch/m68k/platform/5206/
-core-$(CONFIG_M520x)		+= arch/m68k/platform/520x/
-core-$(CONFIG_M523x)		+= arch/m68k/platform/523x/
-core-$(CONFIG_M5249)		+= arch/m68k/platform/5249/
-core-$(CONFIG_M527x)		+= arch/m68k/platform/527x/
-core-$(CONFIG_M5272)		+= arch/m68k/platform/5272/
-core-$(CONFIG_M528x)		+= arch/m68k/platform/528x/
-core-$(CONFIG_M5307)		+= arch/m68k/platform/5307/
-core-$(CONFIG_M532x)		+= arch/m68k/platform/532x/
-core-$(CONFIG_M5407)		+= arch/m68k/platform/5407/
-core-$(CONFIG_M54xx)		+= arch/m68k/platform/54xx/
-
-
-all:	zImage
-
-lilo:	vmlinux
-	if [ -f $(INSTALL_PATH)/vmlinux ]; then mv -f $(INSTALL_PATH)/vmlinux $(INSTALL_PATH)/vmlinux.old; fi
-	if [ -f $(INSTALL_PATH)/System.map ]; then mv -f $(INSTALL_PATH)/System.map $(INSTALL_PATH)/System.old; fi
-	cat vmlinux > $(INSTALL_PATH)/vmlinux
-	cp System.map $(INSTALL_PATH)/System.map
-	if [ -x /sbin/lilo ]; then /sbin/lilo; else /etc/lilo/install; fi
-
-zImage compressed: vmlinux.gz
-
-vmlinux.gz: vmlinux
-
-ifndef CONFIG_KGDB
-	cp vmlinux vmlinux.tmp
-	$(STRIP) vmlinux.tmp
-	gzip -9c vmlinux.tmp >vmlinux.gz
-	rm vmlinux.tmp
-else
-	gzip -9c vmlinux >vmlinux.gz
-endif
-
-bzImage: vmlinux.bz2
-
-vmlinux.bz2: vmlinux
-
-ifndef CONFIG_KGDB
-	cp vmlinux vmlinux.tmp
-	$(STRIP) vmlinux.tmp
-	bzip2 -1c vmlinux.tmp >vmlinux.bz2
-	rm vmlinux.tmp
-else
-	bzip2 -1c vmlinux >vmlinux.bz2
-endif
-
-archclean:
-	rm -f vmlinux.gz vmlinux.bz2
-
-install:
-	sh $(srctree)/arch/m68k/install.sh $(KERNELRELEASE) vmlinux.gz System.map "$(INSTALL_PATH)"
diff --git a/ANDROID_3.4.5/arch/m68k/amiga/Makefile b/ANDROID_3.4.5/arch/m68k/amiga/Makefile
deleted file mode 100644
index 11dd30b1..00000000
--- a/ANDROID_3.4.5/arch/m68k/amiga/Makefile
+++ /dev/null
@@ -1,7 +0,0 @@
-#
-# Makefile for Linux arch/m68k/amiga source directory
-#
-
-obj-y		:= config.o amiints.o cia.o chipram.o amisound.o platform.o
-
-obj-$(CONFIG_AMIGA_PCMCIA)	+= pcmcia.o
diff --git a/ANDROID_3.4.5/arch/m68k/amiga/amiints.c b/ANDROID_3.4.5/arch/m68k/amiga/amiints.c
deleted file mode 100644
index 47b5f900..00000000
--- a/ANDROID_3.4.5/arch/m68k/amiga/amiints.c
+++ /dev/null
@@ -1,174 +0,0 @@
-/*
- * Amiga Linux interrupt handling code
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file COPYING in the main directory of this archive
- * for more details.
- */
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/errno.h>
-#include <linux/irq.h>
-
-#include <asm/irq.h>
-#include <asm/traps.h>
-#include <asm/amigahw.h>
-#include <asm/amigaints.h>
-#include <asm/amipcmcia.h>
-
-
-/*
- * Enable/disable a particular machine specific interrupt source.
- * Note that this may affect other interrupts in case of a shared interrupt.
- * This function should only be called for a _very_ short time to change some
- * internal data, that may not be changed by the interrupt at the same time.
- */
-
-static void amiga_irq_enable(struct irq_data *data)
-{
-	amiga_custom.intena = IF_SETCLR | (1 << (data->irq - IRQ_USER));
-}
-
-static void amiga_irq_disable(struct irq_data *data)
-{
-	amiga_custom.intena = 1 << (data->irq - IRQ_USER);
-}
-
-static struct irq_chip amiga_irq_chip = {
-	.name		= "amiga",
-	.irq_enable	= amiga_irq_enable,
-	.irq_disable	= amiga_irq_disable,
-};
-
-
-/*
- * The builtin Amiga hardware interrupt handlers.
- */
-
-static void ami_int1(unsigned int irq, struct irq_desc *desc)
-{
-	unsigned short ints = amiga_custom.intreqr & amiga_custom.intenar;
-
-	/* if serial transmit buffer empty, interrupt */
-	if (ints & IF_TBE) {
-		amiga_custom.intreq = IF_TBE;
-		generic_handle_irq(IRQ_AMIGA_TBE);
-	}
-
-	/* if floppy disk transfer complete, interrupt */
-	if (ints & IF_DSKBLK) {
-		amiga_custom.intreq = IF_DSKBLK;
-		generic_handle_irq(IRQ_AMIGA_DSKBLK);
-	}
-
-	/* if software interrupt set, interrupt */
-	if (ints & IF_SOFT) {
-		amiga_custom.intreq = IF_SOFT;
-		generic_handle_irq(IRQ_AMIGA_SOFT);
-	}
-}
-
-static void ami_int3(unsigned int irq, struct irq_desc *desc)
-{
-	unsigned short ints = amiga_custom.intreqr & amiga_custom.intenar;
-
-	/* if a blitter interrupt */
-	if (ints & IF_BLIT) {
-		amiga_custom.intreq = IF_BLIT;
-		generic_handle_irq(IRQ_AMIGA_BLIT);
-	}
-
-	/* if a copper interrupt */
-	if (ints & IF_COPER) {
-		amiga_custom.intreq = IF_COPER;
-		generic_handle_irq(IRQ_AMIGA_COPPER);
-	}
-
-	/* if a vertical blank interrupt */
-	if (ints & IF_VERTB) {
-		amiga_custom.intreq = IF_VERTB;
-		generic_handle_irq(IRQ_AMIGA_VERTB);
-	}
-}
-
-static void ami_int4(unsigned int irq, struct irq_desc *desc)
-{
-	unsigned short ints = amiga_custom.intreqr & amiga_custom.intenar;
-
-	/* if audio 0 interrupt */
-	if (ints & IF_AUD0) {
-		amiga_custom.intreq = IF_AUD0;
-		generic_handle_irq(IRQ_AMIGA_AUD0);
-	}
-
-	/* if audio 1 interrupt */
-	if (ints & IF_AUD1) {
-		amiga_custom.intreq = IF_AUD1;
-		generic_handle_irq(IRQ_AMIGA_AUD1);
-	}
-
-	/* if audio 2 interrupt */
-	if (ints & IF_AUD2) {
-		amiga_custom.intreq = IF_AUD2;
-		generic_handle_irq(IRQ_AMIGA_AUD2);
-	}
-
-	/* if audio 3 interrupt */
-	if (ints & IF_AUD3) {
-		amiga_custom.intreq = IF_AUD3;
-		generic_handle_irq(IRQ_AMIGA_AUD3);
-	}
-}
-
-static void ami_int5(unsigned int irq, struct irq_desc *desc)
-{
-	unsigned short ints = amiga_custom.intreqr & amiga_custom.intenar;
-
-	/* if serial receive buffer full interrupt */
-	if (ints & IF_RBF) {
-		/* acknowledge of IF_RBF must be done by the serial interrupt */
-		generic_handle_irq(IRQ_AMIGA_RBF);
-	}
-
-	/* if a disk sync interrupt */
-	if (ints & IF_DSKSYN) {
-		amiga_custom.intreq = IF_DSKSYN;
-		generic_handle_irq(IRQ_AMIGA_DSKSYN);
-	}
-}
-
-
-/*
- * void amiga_init_IRQ(void)
- *
- * Parameters:	None
- *
- * Returns:	Nothing
- *
- * This function should be called during kernel startup to initialize
- * the amiga IRQ handling routines.
- */
-
-void __init amiga_init_IRQ(void)
-{
-	m68k_setup_irq_controller(&amiga_irq_chip, handle_simple_irq, IRQ_USER,
-				  AMI_STD_IRQS);
-
-	irq_set_chained_handler(IRQ_AUTO_1, ami_int1);
-	irq_set_chained_handler(IRQ_AUTO_3, ami_int3);
-	irq_set_chained_handler(IRQ_AUTO_4, ami_int4);
-	irq_set_chained_handler(IRQ_AUTO_5, ami_int5);
-
-	/* turn off PCMCIA interrupts */
-	if (AMIGAHW_PRESENT(PCMCIA))
-		gayle.inten = GAYLE_IRQ_IDE;
-
-	/* turn off all interrupts and enable the master interrupt bit */
-	amiga_custom.intena = 0x7fff;
-	amiga_custom.intreq = 0x7fff;
-	amiga_custom.intena = IF_SETCLR | IF_INTEN;
-
-	cia_init_IRQ(&ciaa_base);
-	cia_init_IRQ(&ciab_base);
-}
diff --git a/ANDROID_3.4.5/arch/m68k/amiga/amisound.c b/ANDROID_3.4.5/arch/m68k/amiga/amisound.c
deleted file mode 100644
index 2559eefc..00000000
--- a/ANDROID_3.4.5/arch/m68k/amiga/amisound.c
+++ /dev/null
@@ -1,116 +0,0 @@
-/*
- * linux/arch/m68k/amiga/amisound.c
- *
- * amiga sound driver for Linux/m68k
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file COPYING in the main directory of this archive
- * for more details.
- */
-
-#include <linux/jiffies.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/string.h>
-#include <linux/module.h>
-
-#include <asm/amigahw.h>
-
-static unsigned short *snd_data;
-static const signed char sine_data[] = {
-	0,  39,  75,  103,  121,  127,  121,  103,  75,  39,
-	0, -39, -75, -103, -121, -127, -121, -103, -75, -39
-};
-#define DATA_SIZE	ARRAY_SIZE(sine_data)
-
-#define custom amiga_custom
-
-    /*
-     * The minimum period for audio may be modified by the frame buffer
-     * device since it depends on htotal (for OCS/ECS/AGA)
-     */
-
-volatile unsigned short amiga_audio_min_period = 124; /* Default for pre-OCS */
-EXPORT_SYMBOL(amiga_audio_min_period);
-
-#define MAX_PERIOD	(65535)
-
-
-    /*
-     *	Current period (set by dmasound.c)
-     */
-
-unsigned short amiga_audio_period = MAX_PERIOD;
-EXPORT_SYMBOL(amiga_audio_period);
-
-static unsigned long clock_constant;
-
-void __init amiga_init_sound(void)
-{
-	static struct resource beep_res = { .name = "Beep" };
-
-	snd_data = amiga_chip_alloc_res(sizeof(sine_data), &beep_res);
-	if (!snd_data) {
-		printk (KERN_CRIT "amiga init_sound: failed to allocate chipmem\n");
-		return;
-	}
-	memcpy (snd_data, sine_data, sizeof(sine_data));
-
-	/* setup divisor */
-	clock_constant = (amiga_colorclock+DATA_SIZE/2)/DATA_SIZE;
-
-	/* without amifb, turn video off and enable high quality sound */
-#ifndef CONFIG_FB_AMIGA
-	amifb_video_off();
-#endif
-}
-
-static void nosound( unsigned long ignored );
-static DEFINE_TIMER(sound_timer, nosound, 0, 0);
-
-void amiga_mksound( unsigned int hz, unsigned int ticks )
-{
-	unsigned long flags;
-
-	if (!snd_data)
-		return;
-
-	local_irq_save(flags);
-	del_timer( &sound_timer );
-
-	if (hz > 20 && hz < 32767) {
-		unsigned long period = (clock_constant / hz);
-
-		if (period < amiga_audio_min_period)
-			period = amiga_audio_min_period;
-		if (period > MAX_PERIOD)
-			period = MAX_PERIOD;
-
-		/* setup pointer to data, period, length and volume */
-		custom.aud[2].audlc = snd_data;
-		custom.aud[2].audlen = sizeof(sine_data)/2;
-		custom.aud[2].audper = (unsigned short)period;
-		custom.aud[2].audvol = 32; /* 50% of maxvol */
-
-		if (ticks) {
-			sound_timer.expires = jiffies + ticks;
-			add_timer( &sound_timer );
-		}
-
-		/* turn on DMA for audio channel 2 */
-		custom.dmacon = DMAF_SETCLR | DMAF_AUD2;
-
-	} else
-		nosound( 0 );
-
-	local_irq_restore(flags);
-}
-
-
-static void nosound( unsigned long ignored )
-{
-	/* turn off DMA for audio channel 2 */
-	custom.dmacon = DMAF_AUD2;
-	/* restore period to previous value after beeping */
-	custom.aud[2].audper = amiga_audio_period;
-}
diff --git a/ANDROID_3.4.5/arch/m68k/amiga/chipram.c b/ANDROID_3.4.5/arch/m68k/amiga/chipram.c
deleted file mode 100644
index 99449fbf..00000000
--- a/ANDROID_3.4.5/arch/m68k/amiga/chipram.c
+++ /dev/null
@@ -1,123 +0,0 @@
-/*
-**  linux/amiga/chipram.c
-**
-**      Modified 03-May-94 by Geert Uytterhoeven <geert@linux-m68k.org>
-**          - 64-bit aligned allocations for full AGA compatibility
-**
-**	Rewritten 15/9/2000 by Geert to use resource management
-*/
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/slab.h>
-#include <linux/string.h>
-#include <linux/module.h>
-
-#include <asm/atomic.h>
-#include <asm/page.h>
-#include <asm/amigahw.h>
-
-unsigned long amiga_chip_size;
-EXPORT_SYMBOL(amiga_chip_size);
-
-static struct resource chipram_res = {
-	.name = "Chip RAM", .start = CHIP_PHYSADDR
-};
-static atomic_t chipavail;
-
-
-void __init amiga_chip_init(void)
-{
-	if (!AMIGAHW_PRESENT(CHIP_RAM))
-		return;
-
-	chipram_res.end = CHIP_PHYSADDR + amiga_chip_size - 1;
-	request_resource(&iomem_resource, &chipram_res);
-
-	atomic_set(&chipavail, amiga_chip_size);
-}
-
-
-void *amiga_chip_alloc(unsigned long size, const char *name)
-{
-	struct resource *res;
-	void *p;
-
-	res = kzalloc(sizeof(struct resource), GFP_KERNEL);
-	if (!res)
-		return NULL;
-
-	res->name = name;
-	p = amiga_chip_alloc_res(size, res);
-	if (!p) {
-		kfree(res);
-		return NULL;
-	}
-
-	return p;
-}
-EXPORT_SYMBOL(amiga_chip_alloc);
-
-
-	/*
-	 *  Warning:
-	 *  amiga_chip_alloc_res is meant only for drivers that need to
-	 *  allocate Chip RAM before kmalloc() is functional. As a consequence,
-	 *  those drivers must not free that Chip RAM afterwards.
-	 */
-
-void *amiga_chip_alloc_res(unsigned long size, struct resource *res)
-{
-	int error;
-
-	/* round up */
-	size = PAGE_ALIGN(size);
-
-	pr_debug("amiga_chip_alloc_res: allocate %lu bytes\n", size);
-	error = allocate_resource(&chipram_res, res, size, 0, UINT_MAX,
-				  PAGE_SIZE, NULL, NULL);
-	if (error < 0) {
-		pr_err("amiga_chip_alloc_res: allocate_resource() failed %d!\n",
-		       error);
-		return NULL;
-	}
-
-	atomic_sub(size, &chipavail);
-	pr_debug("amiga_chip_alloc_res: returning %pR\n", res);
-	return (void *)ZTWO_VADDR(res->start);
-}
-
-void amiga_chip_free(void *ptr)
-{
-	unsigned long start = ZTWO_PADDR(ptr);
-	struct resource *res;
-	unsigned long size;
-
-	res = lookup_resource(&chipram_res, start);
-	if (!res) {
-		pr_err("amiga_chip_free: trying to free nonexistent region at "
-		       "%p\n", ptr);
-		return;
-	}
-
-	size = resource_size(res);
-	pr_debug("amiga_chip_free: free %lu bytes at %p\n", size, ptr);
-	atomic_add(size, &chipavail);
-	release_resource(res);
-	kfree(res);
-}
-EXPORT_SYMBOL(amiga_chip_free);
-
-
-unsigned long amiga_chip_avail(void)
-{
-	unsigned long n = atomic_read(&chipavail);
-
-	pr_debug("amiga_chip_avail : %lu bytes\n", n);
-	return n;
-}
-EXPORT_SYMBOL(amiga_chip_avail);
-
diff --git a/ANDROID_3.4.5/arch/m68k/amiga/cia.c b/ANDROID_3.4.5/arch/m68k/amiga/cia.c
deleted file mode 100644
index 18c0e299..00000000
--- a/ANDROID_3.4.5/arch/m68k/amiga/cia.c
+++ /dev/null
@@ -1,185 +0,0 @@
-/*
- *  linux/arch/m68k/amiga/cia.c - CIA support
- *
- *  Copyright (C) 1996 Roman Zippel
- *
- *  The concept of some functions bases on the original Amiga OS function
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file COPYING in the main directory of this archive
- * for more details.
- */
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/errno.h>
-#include <linux/kernel_stat.h>
-#include <linux/init.h>
-#include <linux/seq_file.h>
-#include <linux/interrupt.h>
-
-#include <asm/irq.h>
-#include <asm/amigahw.h>
-#include <asm/amigaints.h>
-
-struct ciabase {
-	volatile struct CIA *cia;
-	unsigned char icr_mask, icr_data;
-	unsigned short int_mask;
-	int handler_irq, cia_irq, server_irq;
-	char *name;
-} ciaa_base = {
-	.cia		= &ciaa,
-	.int_mask	= IF_PORTS,
-	.handler_irq	= IRQ_AMIGA_PORTS,
-	.cia_irq	= IRQ_AMIGA_CIAA,
-	.name		= "CIAA"
-}, ciab_base = {
-	.cia		= &ciab,
-	.int_mask	= IF_EXTER,
-	.handler_irq	= IRQ_AMIGA_EXTER,
-	.cia_irq	= IRQ_AMIGA_CIAB,
-	.name		= "CIAB"
-};
-
-/*
- *  Cause or clear CIA interrupts, return old interrupt status.
- */
-
-unsigned char cia_set_irq(struct ciabase *base, unsigned char mask)
-{
-	unsigned char old;
-
-	old = (base->icr_data |= base->cia->icr);
-	if (mask & CIA_ICR_SETCLR)
-		base->icr_data |= mask;
-	else
-		base->icr_data &= ~mask;
-	if (base->icr_data & base->icr_mask)
-		amiga_custom.intreq = IF_SETCLR | base->int_mask;
-	return old & base->icr_mask;
-}
-
-/*
- *  Enable or disable CIA interrupts, return old interrupt mask,
- */
-
-unsigned char cia_able_irq(struct ciabase *base, unsigned char mask)
-{
-	unsigned char old;
-
-	old = base->icr_mask;
-	base->icr_data |= base->cia->icr;
-	base->cia->icr = mask;
-	if (mask & CIA_ICR_SETCLR)
-		base->icr_mask |= mask;
-	else
-		base->icr_mask &= ~mask;
-	base->icr_mask &= CIA_ICR_ALL;
-	if (base->icr_data & base->icr_mask)
-		amiga_custom.intreq = IF_SETCLR | base->int_mask;
-	return old;
-}
-
-static irqreturn_t cia_handler(int irq, void *dev_id)
-{
-	struct ciabase *base = dev_id;
-	int mach_irq;
-	unsigned char ints;
-
-	mach_irq = base->cia_irq;
-	ints = cia_set_irq(base, CIA_ICR_ALL);
-	amiga_custom.intreq = base->int_mask;
-	for (; ints; mach_irq++, ints >>= 1) {
-		if (ints & 1)
-			generic_handle_irq(mach_irq);
-	}
-	return IRQ_HANDLED;
-}
-
-static void cia_irq_enable(struct irq_data *data)
-{
-	unsigned int irq = data->irq;
-	unsigned char mask;
-
-	if (irq >= IRQ_AMIGA_CIAB) {
-		mask = 1 << (irq - IRQ_AMIGA_CIAB);
-		cia_set_irq(&ciab_base, mask);
-		cia_able_irq(&ciab_base, CIA_ICR_SETCLR | mask);
-	} else {
-		mask = 1 << (irq - IRQ_AMIGA_CIAA);
-		cia_set_irq(&ciaa_base, mask);
-		cia_able_irq(&ciaa_base, CIA_ICR_SETCLR | mask);
-	}
-}
-
-static void cia_irq_disable(struct irq_data *data)
-{
-	unsigned int irq = data->irq;
-
-	if (irq >= IRQ_AMIGA_CIAB)
-		cia_able_irq(&ciab_base, 1 << (irq - IRQ_AMIGA_CIAB));
-	else
-		cia_able_irq(&ciaa_base, 1 << (irq - IRQ_AMIGA_CIAA));
-}
-
-static struct irq_chip cia_irq_chip = {
-	.name		= "cia",
-	.irq_enable	= cia_irq_enable,
-	.irq_disable	= cia_irq_disable,
-};
-
-/*
- * Override auto irq 2 & 6 and use them as general chain
- * for external interrupts, we link the CIA interrupt sources
- * into this chain.
- */
-
-static void auto_irq_enable(struct irq_data *data)
-{
-	switch (data->irq) {
-	case IRQ_AUTO_2:
-		amiga_custom.intena = IF_SETCLR | IF_PORTS;
-		break;
-	case IRQ_AUTO_6:
-		amiga_custom.intena = IF_SETCLR | IF_EXTER;
-		break;
-	}
-}
-
-static void auto_irq_disable(struct irq_data *data)
-{
-	switch (data->irq) {
-	case IRQ_AUTO_2:
-		amiga_custom.intena = IF_PORTS;
-		break;
-	case IRQ_AUTO_6:
-		amiga_custom.intena = IF_EXTER;
-		break;
-	}
-}
-
-static struct irq_chip auto_irq_chip = {
-	.name		= "auto",
-	.irq_enable	= auto_irq_enable,
-	.irq_disable	= auto_irq_disable,
-};
-
-void __init cia_init_IRQ(struct ciabase *base)
-{
-	m68k_setup_irq_controller(&cia_irq_chip, handle_simple_irq,
-				  base->cia_irq, CIA_IRQS);
-
-	/* clear any pending interrupt and turn off all interrupts */
-	cia_set_irq(base, CIA_ICR_ALL);
-	cia_able_irq(base, CIA_ICR_ALL);
-
-	/* override auto int and install CIA handler */
-	m68k_setup_irq_controller(&auto_irq_chip, handle_simple_irq,
-				  base->handler_irq, 1);
-	m68k_irq_startup_irq(base->handler_irq);
-	if (request_irq(base->handler_irq, cia_handler, IRQF_SHARED,
-			base->name, base))
-		pr_err("Couldn't register %s interrupt\n", base->name);
-}
diff --git a/ANDROID_3.4.5/arch/m68k/amiga/config.c b/ANDROID_3.4.5/arch/m68k/amiga/config.c
deleted file mode 100644
index ee01b7a3..00000000
--- a/ANDROID_3.4.5/arch/m68k/amiga/config.c
+++ /dev/null
@@ -1,817 +0,0 @@
-/*
- *  linux/arch/m68k/amiga/config.c
- *
- *  Copyright (C) 1993 Hamish Macdonald
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file COPYING in the main directory of this archive
- * for more details.
- */
-
-/*
- * Miscellaneous Amiga stuff
- */
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/seq_file.h>
-#include <linux/tty.h>
-#include <linux/console.h>
-#include <linux/rtc.h>
-#include <linux/init.h>
-#include <linux/vt_kern.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/zorro.h>
-#include <linux/module.h>
-#include <linux/keyboard.h>
-
-#include <asm/bootinfo.h>
-#include <asm/setup.h>
-#include <asm/pgtable.h>
-#include <asm/amigahw.h>
-#include <asm/amigaints.h>
-#include <asm/irq.h>
-#include <asm/rtc.h>
-#include <asm/machdep.h>
-#include <asm/io.h>
-
-static unsigned long amiga_model;
-
-unsigned long amiga_eclock;
-EXPORT_SYMBOL(amiga_eclock);
-
-unsigned long amiga_colorclock;
-EXPORT_SYMBOL(amiga_colorclock);
-
-unsigned long amiga_chipset;
-EXPORT_SYMBOL(amiga_chipset);
-
-unsigned char amiga_vblank;
-EXPORT_SYMBOL(amiga_vblank);
-
-static unsigned char amiga_psfreq;
-
-struct amiga_hw_present amiga_hw_present;
-EXPORT_SYMBOL(amiga_hw_present);
-
-static char s_a500[] __initdata = "A500";
-static char s_a500p[] __initdata = "A500+";
-static char s_a600[] __initdata = "A600";
-static char s_a1000[] __initdata = "A1000";
-static char s_a1200[] __initdata = "A1200";
-static char s_a2000[] __initdata = "A2000";
-static char s_a2500[] __initdata = "A2500";
-static char s_a3000[] __initdata = "A3000";
-static char s_a3000t[] __initdata = "A3000T";
-static char s_a3000p[] __initdata = "A3000+";
-static char s_a4000[] __initdata = "A4000";
-static char s_a4000t[] __initdata = "A4000T";
-static char s_cdtv[] __initdata = "CDTV";
-static char s_cd32[] __initdata = "CD32";
-static char s_draco[] __initdata = "Draco";
-static char *amiga_models[] __initdata = {
-	[AMI_500-AMI_500]	= s_a500,
-	[AMI_500PLUS-AMI_500]	= s_a500p,
-	[AMI_600-AMI_500]	= s_a600,
-	[AMI_1000-AMI_500]	= s_a1000,
-	[AMI_1200-AMI_500]	= s_a1200,
-	[AMI_2000-AMI_500]	= s_a2000,
-	[AMI_2500-AMI_500]	= s_a2500,
-	[AMI_3000-AMI_500]	= s_a3000,
-	[AMI_3000T-AMI_500]	= s_a3000t,
-	[AMI_3000PLUS-AMI_500]	= s_a3000p,
-	[AMI_4000-AMI_500]	= s_a4000,
-	[AMI_4000T-AMI_500]	= s_a4000t,
-	[AMI_CDTV-AMI_500]	= s_cdtv,
-	[AMI_CD32-AMI_500]	= s_cd32,
-	[AMI_DRACO-AMI_500]	= s_draco,
-};
-
-static char amiga_model_name[13] = "Amiga ";
-
-static void amiga_sched_init(irq_handler_t handler);
-static void amiga_get_model(char *model);
-static void amiga_get_hardware_list(struct seq_file *m);
-/* amiga specific timer functions */
-static unsigned long amiga_gettimeoffset(void);
-extern void amiga_mksound(unsigned int count, unsigned int ticks);
-static void amiga_reset(void);
-extern void amiga_init_sound(void);
-static void amiga_mem_console_write(struct console *co, const char *b,
-				    unsigned int count);
-#ifdef CONFIG_HEARTBEAT
-static void amiga_heartbeat(int on);
-#endif
-
-static struct console amiga_console_driver = {
-	.name	= "debug",
-	.flags	= CON_PRINTBUFFER,
-	.index	= -1,
-};
-
-
-    /*
-     *  Motherboard Resources present in all Amiga models
-     */
-
-static struct {
-	struct resource _ciab, _ciaa, _custom, _kickstart;
-} mb_resources = {
-	._ciab = {
-		.name = "CIA B", .start = 0x00bfd000, .end = 0x00bfdfff
-	},
-	._ciaa = {
-		.name = "CIA A", .start = 0x00bfe000, .end = 0x00bfefff
-	},
-	._custom = {
-		.name = "Custom I/O", .start = 0x00dff000, .end = 0x00dfffff
-	},
-	._kickstart = {
-		.name = "Kickstart ROM", .start = 0x00f80000, .end = 0x00ffffff
-	}
-};
-
-static struct resource ram_resource[NUM_MEMINFO];
-
-
-    /*
-     *  Parse an Amiga-specific record in the bootinfo
-     */
-
-int amiga_parse_bootinfo(const struct bi_record *record)
-{
-	int unknown = 0;
-	const unsigned long *data = record->data;
-
-	switch (record->tag) {
-	case BI_AMIGA_MODEL:
-		amiga_model = *data;
-		break;
-
-	case BI_AMIGA_ECLOCK:
-		amiga_eclock = *data;
-		break;
-
-	case BI_AMIGA_CHIPSET:
-		amiga_chipset = *data;
-		break;
-
-	case BI_AMIGA_CHIP_SIZE:
-		amiga_chip_size = *(const int *)data;
-		break;
-
-	case BI_AMIGA_VBLANK:
-		amiga_vblank = *(const unsigned char *)data;
-		break;
-
-	case BI_AMIGA_PSFREQ:
-		amiga_psfreq = *(const unsigned char *)data;
-		break;
-
-	case BI_AMIGA_AUTOCON:
-#ifdef CONFIG_ZORRO
-		if (zorro_num_autocon < ZORRO_NUM_AUTO) {
-			const struct ConfigDev *cd = (struct ConfigDev *)data;
-			struct zorro_dev *dev = &zorro_autocon[zorro_num_autocon++];
-			dev->rom = cd->cd_Rom;
-			dev->slotaddr = cd->cd_SlotAddr;
-			dev->slotsize = cd->cd_SlotSize;
-			dev->resource.start = (unsigned long)cd->cd_BoardAddr;
-			dev->resource.end = dev->resource.start + cd->cd_BoardSize - 1;
-		} else
-			printk("amiga_parse_bootinfo: too many AutoConfig devices\n");
-#endif /* CONFIG_ZORRO */
-		break;
-
-	case BI_AMIGA_SERPER:
-		/* serial port period: ignored here */
-		break;
-
-	default:
-		unknown = 1;
-	}
-	return unknown;
-}
-
-    /*
-     *  Identify builtin hardware
-     */
-
-static void __init amiga_identify(void)
-{
-	/* Fill in some default values, if necessary */
-	if (amiga_eclock == 0)
-		amiga_eclock = 709379;
-
-	memset(&amiga_hw_present, 0, sizeof(amiga_hw_present));
-
-	printk("Amiga hardware found: ");
-	if (amiga_model >= AMI_500 && amiga_model <= AMI_DRACO) {
-		printk("[%s] ", amiga_models[amiga_model-AMI_500]);
-		strcat(amiga_model_name, amiga_models[amiga_model-AMI_500]);
-	}
-
-	switch (amiga_model) {
-	case AMI_UNKNOWN:
-		goto Generic;
-
-	case AMI_600:
-	case AMI_1200:
-		AMIGAHW_SET(A1200_IDE);
-		AMIGAHW_SET(PCMCIA);
-	case AMI_500:
-	case AMI_500PLUS:
-	case AMI_1000:
-	case AMI_2000:
-	case AMI_2500:
-		AMIGAHW_SET(A2000_CLK);	/* Is this correct for all models? */
-		goto Generic;
-
-	case AMI_3000:
-	case AMI_3000T:
-		AMIGAHW_SET(AMBER_FF);
-		AMIGAHW_SET(MAGIC_REKICK);
-		/* fall through */
-	case AMI_3000PLUS:
-		AMIGAHW_SET(A3000_SCSI);
-		AMIGAHW_SET(A3000_CLK);
-		AMIGAHW_SET(ZORRO3);
-		goto Generic;
-
-	case AMI_4000T:
-		AMIGAHW_SET(A4000_SCSI);
-		/* fall through */
-	case AMI_4000:
-		AMIGAHW_SET(A4000_IDE);
-		AMIGAHW_SET(A3000_CLK);
-		AMIGAHW_SET(ZORRO3);
-		goto Generic;
-
-	case AMI_CDTV:
-	case AMI_CD32:
-		AMIGAHW_SET(CD_ROM);
-		AMIGAHW_SET(A2000_CLK);             /* Is this correct? */
-		goto Generic;
-
-	Generic:
-		AMIGAHW_SET(AMI_VIDEO);
-		AMIGAHW_SET(AMI_BLITTER);
-		AMIGAHW_SET(AMI_AUDIO);
-		AMIGAHW_SET(AMI_FLOPPY);
-		AMIGAHW_SET(AMI_KEYBOARD);
-		AMIGAHW_SET(AMI_MOUSE);
-		AMIGAHW_SET(AMI_SERIAL);
-		AMIGAHW_SET(AMI_PARALLEL);
-		AMIGAHW_SET(CHIP_RAM);
-		AMIGAHW_SET(PAULA);
-
-		switch (amiga_chipset) {
-		case CS_OCS:
-		case CS_ECS:
-		case CS_AGA:
-			switch (amiga_custom.deniseid & 0xf) {
-			case 0x0c:
-				AMIGAHW_SET(DENISE_HR);
-				break;
-			case 0x08:
-				AMIGAHW_SET(LISA);
-				break;
-			}
-			break;
-		default:
-			AMIGAHW_SET(DENISE);
-			break;
-		}
-		switch ((amiga_custom.vposr>>8) & 0x7f) {
-		case 0x00:
-			AMIGAHW_SET(AGNUS_PAL);
-			break;
-		case 0x10:
-			AMIGAHW_SET(AGNUS_NTSC);
-			break;
-		case 0x20:
-		case 0x21:
-			AMIGAHW_SET(AGNUS_HR_PAL);
-			break;
-		case 0x30:
-		case 0x31:
-			AMIGAHW_SET(AGNUS_HR_NTSC);
-			break;
-		case 0x22:
-		case 0x23:
-			AMIGAHW_SET(ALICE_PAL);
-			break;
-		case 0x32:
-		case 0x33:
-			AMIGAHW_SET(ALICE_NTSC);
-			break;
-		}
-		AMIGAHW_SET(ZORRO);
-		break;
-
-	case AMI_DRACO:
-		panic("No support for Draco yet");
-
-	default:
-		panic("Unknown Amiga Model");
-	}
-
-#define AMIGAHW_ANNOUNCE(name, str)		\
-	if (AMIGAHW_PRESENT(name))		\
-		printk(str)
-
-	AMIGAHW_ANNOUNCE(AMI_VIDEO, "VIDEO ");
-	AMIGAHW_ANNOUNCE(AMI_BLITTER, "BLITTER ");
-	AMIGAHW_ANNOUNCE(AMBER_FF, "AMBER_FF ");
-	AMIGAHW_ANNOUNCE(AMI_AUDIO, "AUDIO ");
-	AMIGAHW_ANNOUNCE(AMI_FLOPPY, "FLOPPY ");
-	AMIGAHW_ANNOUNCE(A3000_SCSI, "A3000_SCSI ");
-	AMIGAHW_ANNOUNCE(A4000_SCSI, "A4000_SCSI ");
-	AMIGAHW_ANNOUNCE(A1200_IDE, "A1200_IDE ");
-	AMIGAHW_ANNOUNCE(A4000_IDE, "A4000_IDE ");
-	AMIGAHW_ANNOUNCE(CD_ROM, "CD_ROM ");
-	AMIGAHW_ANNOUNCE(AMI_KEYBOARD, "KEYBOARD ");
-	AMIGAHW_ANNOUNCE(AMI_MOUSE, "MOUSE ");
-	AMIGAHW_ANNOUNCE(AMI_SERIAL, "SERIAL ");
-	AMIGAHW_ANNOUNCE(AMI_PARALLEL, "PARALLEL ");
-	AMIGAHW_ANNOUNCE(A2000_CLK, "A2000_CLK ");
-	AMIGAHW_ANNOUNCE(A3000_CLK, "A3000_CLK ");
-	AMIGAHW_ANNOUNCE(CHIP_RAM, "CHIP_RAM ");
-	AMIGAHW_ANNOUNCE(PAULA, "PAULA ");
-	AMIGAHW_ANNOUNCE(DENISE, "DENISE ");
-	AMIGAHW_ANNOUNCE(DENISE_HR, "DENISE_HR ");
-	AMIGAHW_ANNOUNCE(LISA, "LISA ");
-	AMIGAHW_ANNOUNCE(AGNUS_PAL, "AGNUS_PAL ");
-	AMIGAHW_ANNOUNCE(AGNUS_NTSC, "AGNUS_NTSC ");
-	AMIGAHW_ANNOUNCE(AGNUS_HR_PAL, "AGNUS_HR_PAL ");
-	AMIGAHW_ANNOUNCE(AGNUS_HR_NTSC, "AGNUS_HR_NTSC ");
-	AMIGAHW_ANNOUNCE(ALICE_PAL, "ALICE_PAL ");
-	AMIGAHW_ANNOUNCE(ALICE_NTSC, "ALICE_NTSC ");
-	AMIGAHW_ANNOUNCE(MAGIC_REKICK, "MAGIC_REKICK ");
-	AMIGAHW_ANNOUNCE(PCMCIA, "PCMCIA ");
-	if (AMIGAHW_PRESENT(ZORRO))
-		printk("ZORRO%s ", AMIGAHW_PRESENT(ZORRO3) ? "3" : "");
-	printk("\n");
-
-#undef AMIGAHW_ANNOUNCE
-}
-
-    /*
-     *  Setup the Amiga configuration info
-     */
-
-void __init config_amiga(void)
-{
-	int i;
-
-	amiga_identify();
-
-	/* Yuk, we don't have PCI memory */
-	iomem_resource.name = "Memory";
-	for (i = 0; i < 4; i++)
-		request_resource(&iomem_resource, &((struct resource *)&mb_resources)[i]);
-
-	mach_sched_init      = amiga_sched_init;
-	mach_init_IRQ        = amiga_init_IRQ;
-	mach_get_model       = amiga_get_model;
-	mach_get_hardware_list = amiga_get_hardware_list;
-	mach_gettimeoffset   = amiga_gettimeoffset;
-
-	/*
-	 * default MAX_DMA=0xffffffff on all machines. If we don't do so, the SCSI
-	 * code will not be able to allocate any mem for transfers, unless we are
-	 * dealing with a Z2 mem only system.                  /Jes
-	 */
-	mach_max_dma_address = 0xffffffff;
-
-	mach_reset           = amiga_reset;
-#if defined(CONFIG_INPUT_M68K_BEEP) || defined(CONFIG_INPUT_M68K_BEEP_MODULE)
-	mach_beep            = amiga_mksound;
-#endif
-
-#ifdef CONFIG_HEARTBEAT
-	mach_heartbeat = amiga_heartbeat;
-#endif
-
-	/* Fill in the clock value (based on the 700 kHz E-Clock) */
-	amiga_colorclock = 5*amiga_eclock;	/* 3.5 MHz */
-
-	/* clear all DMA bits */
-	amiga_custom.dmacon = DMAF_ALL;
-	/* ensure that the DMA master bit is set */
-	amiga_custom.dmacon = DMAF_SETCLR | DMAF_MASTER;
-
-	/* don't use Z2 RAM as system memory on Z3 capable machines */
-	if (AMIGAHW_PRESENT(ZORRO3)) {
-		int i, j;
-		u32 disabled_z2mem = 0;
-
-		for (i = 0; i < m68k_num_memory; i++) {
-			if (m68k_memory[i].addr < 16*1024*1024) {
-				if (i == 0) {
-					/* don't cut off the branch we're sitting on */
-					printk("Warning: kernel runs in Zorro II memory\n");
-					continue;
-				}
-				disabled_z2mem += m68k_memory[i].size;
-				m68k_num_memory--;
-				for (j = i; j < m68k_num_memory; j++)
-					m68k_memory[j] = m68k_memory[j+1];
-				i--;
-			}
-		}
-		if (disabled_z2mem)
-		printk("%dK of Zorro II memory will not be used as system memory\n",
-		disabled_z2mem>>10);
-	}
-
-	/* request all RAM */
-	for (i = 0; i < m68k_num_memory; i++) {
-		ram_resource[i].name =
-			(m68k_memory[i].addr >= 0x01000000) ? "32-bit Fast RAM" :
-			(m68k_memory[i].addr < 0x00c00000) ? "16-bit Fast RAM" :
-			"16-bit Slow RAM";
-		ram_resource[i].start = m68k_memory[i].addr;
-		ram_resource[i].end = m68k_memory[i].addr+m68k_memory[i].size-1;
-		request_resource(&iomem_resource, &ram_resource[i]);
-	}
-
-	/* initialize chipram allocator */
-	amiga_chip_init();
-
-	/* our beloved beeper */
-	if (AMIGAHW_PRESENT(AMI_AUDIO))
-		amiga_init_sound();
-
-	/*
-	 * if it is an A3000, set the magic bit that forces
-	 * a hard rekick
-	 */
-	if (AMIGAHW_PRESENT(MAGIC_REKICK))
-		*(unsigned char *)ZTWO_VADDR(0xde0002) |= 0x80;
-}
-
-static unsigned short jiffy_ticks;
-
-static void __init amiga_sched_init(irq_handler_t timer_routine)
-{
-	static struct resource sched_res = {
-		.name = "timer", .start = 0x00bfd400, .end = 0x00bfd5ff,
-	};
-	jiffy_ticks = DIV_ROUND_CLOSEST(amiga_eclock, HZ);
-
-	if (request_resource(&mb_resources._ciab, &sched_res))
-		printk("Cannot allocate ciab.ta{lo,hi}\n");
-	ciab.cra &= 0xC0;   /* turn off timer A, continuous mode, from Eclk */
-	ciab.talo = jiffy_ticks % 256;
-	ciab.tahi = jiffy_ticks / 256;
-
-	/* install interrupt service routine for CIAB Timer A
-	 *
-	 * Please don't change this to use ciaa, as it interferes with the
-	 * SCSI code. We'll have to take a look at this later
-	 */
-	if (request_irq(IRQ_AMIGA_CIAB_TA, timer_routine, 0, "timer", NULL))
-		pr_err("Couldn't register timer interrupt\n");
-	/* start timer */
-	ciab.cra |= 0x11;
-}
-
-#define TICK_SIZE 10000
-
-/* This is always executed with interrupts disabled.  */
-static unsigned long amiga_gettimeoffset(void)
-{
-	unsigned short hi, lo, hi2;
-	unsigned long ticks, offset = 0;
-
-	/* read CIA B timer A current value */
-	hi  = ciab.tahi;
-	lo  = ciab.talo;
-	hi2 = ciab.tahi;
-
-	if (hi != hi2) {
-		lo = ciab.talo;
-		hi = hi2;
-	}
-
-	ticks = hi << 8 | lo;
-
-	if (ticks > jiffy_ticks / 2)
-		/* check for pending interrupt */
-		if (cia_set_irq(&ciab_base, 0) & CIA_ICR_TA)
-			offset = 10000;
-
-	ticks = jiffy_ticks - ticks;
-	ticks = (10000 * ticks) / jiffy_ticks;
-
-	return ticks + offset;
-}
-
-static void amiga_reset(void)  __noreturn;
-
-static void amiga_reset(void)
-{
-	unsigned long jmp_addr040 = virt_to_phys(&&jmp_addr_label040);
-	unsigned long jmp_addr = virt_to_phys(&&jmp_addr_label);
-
-	local_irq_disable();
-	if (CPU_IS_040_OR_060)
-		/* Setup transparent translation registers for mapping
-		 * of 16 MB kernel segment before disabling translation
-		 */
-		asm volatile ("\n"
-			"	move.l	%0,%%d0\n"
-			"	and.l	#0xff000000,%%d0\n"
-			"	or.w	#0xe020,%%d0\n"   /* map 16 MB, enable, cacheable */
-			"	.chip	68040\n"
-			"	movec	%%d0,%%itt0\n"
-			"	movec	%%d0,%%dtt0\n"
-			"	.chip	68k\n"
-			"	jmp	%0@\n"
-			: /* no outputs */
-			: "a" (jmp_addr040)
-			: "d0");
-	else
-		/* for 680[23]0, just disable translation and jump to the physical
-		 * address of the label
-		 */
-		asm volatile ("\n"
-			"	pmove	%%tc,%@\n"
-			"	bclr	#7,%@\n"
-			"	pmove	%@,%%tc\n"
-			"	jmp	%0@\n"
-			: /* no outputs */
-			: "a" (jmp_addr));
-jmp_addr_label040:
-	/* disable translation on '040 now */
-	asm volatile ("\n"
-		"	moveq	#0,%%d0\n"
-		"	.chip	68040\n"
-		"	movec	%%d0,%%tc\n"	/* disable MMU */
-		"	.chip	68k\n"
-		: /* no outputs */
-		: /* no inputs */
-		: "d0");
-
-	jmp_addr_label:
-	/* pickup reset address from AmigaOS ROM, reset devices and jump
-	 * to reset address
-	 */
-	asm volatile ("\n"
-		"	move.w	#0x2700,%sr\n"
-		"	lea	0x01000000,%a0\n"
-		"	sub.l	%a0@(-0x14),%a0\n"
-		"	move.l	%a0@(4),%a0\n"
-		"	subq.l	#2,%a0\n"
-		"	jra	1f\n"
-		/* align on a longword boundary */
-		"	" __ALIGN_STR "\n"
-		"1:\n"
-		"	reset\n"
-		"	jmp   %a0@");
-
-	for (;;)
-		;
-}
-
-
-    /*
-     *  Debugging
-     */
-
-#define SAVEKMSG_MAXMEM		128*1024
-
-#define SAVEKMSG_MAGIC1		0x53415645	/* 'SAVE' */
-#define SAVEKMSG_MAGIC2		0x4B4D5347	/* 'KMSG' */
-
-struct savekmsg {
-	unsigned long magic1;		/* SAVEKMSG_MAGIC1 */
-	unsigned long magic2;		/* SAVEKMSG_MAGIC2 */
-	unsigned long magicptr;		/* address of magic1 */
-	unsigned long size;
-	char data[0];
-};
-
-static struct savekmsg *savekmsg;
-
-static void amiga_mem_console_write(struct console *co, const char *s,
-				    unsigned int count)
-{
-	if (savekmsg->size + count <= SAVEKMSG_MAXMEM-sizeof(struct savekmsg)) {
-		memcpy(savekmsg->data + savekmsg->size, s, count);
-		savekmsg->size += count;
-	}
-}
-
-static int __init amiga_savekmsg_setup(char *arg)
-{
-	if (!MACH_IS_AMIGA || strcmp(arg, "mem"))
-		return 0;
-
-	if (amiga_chip_size < SAVEKMSG_MAXMEM) {
-		pr_err("Not enough chipram for debugging\n");
-		return -ENOMEM;
-	}
-
-	/* Just steal the block, the chipram allocator isn't functional yet */
-	amiga_chip_size -= SAVEKMSG_MAXMEM;
-	savekmsg = (void *)ZTWO_VADDR(CHIP_PHYSADDR + amiga_chip_size);
-	savekmsg->magic1 = SAVEKMSG_MAGIC1;
-	savekmsg->magic2 = SAVEKMSG_MAGIC2;
-	savekmsg->magicptr = ZTWO_PADDR(savekmsg);
-	savekmsg->size = 0;
-
-	amiga_console_driver.write = amiga_mem_console_write;
-	register_console(&amiga_console_driver);
-	return 0;
-}
-
-early_param("debug", amiga_savekmsg_setup);
-
-static void amiga_serial_putc(char c)
-{
-	amiga_custom.serdat = (unsigned char)c | 0x100;
-	while (!(amiga_custom.serdatr & 0x2000))
-		;
-}
-
-static void amiga_serial_console_write(struct console *co, const char *s,
-				       unsigned int count)
-{
-	while (count--) {
-		if (*s == '\n')
-			amiga_serial_putc('\r');
-		amiga_serial_putc(*s++);
-	}
-}
-
-#if 0
-void amiga_serial_puts(const char *s)
-{
-	amiga_serial_console_write(NULL, s, strlen(s));
-}
-
-int amiga_serial_console_wait_key(struct console *co)
-{
-	int ch;
-
-	while (!(amiga_custom.intreqr & IF_RBF))
-		barrier();
-	ch = amiga_custom.serdatr & 0xff;
-	/* clear the interrupt, so that another character can be read */
-	amiga_custom.intreq = IF_RBF;
-	return ch;
-}
-
-void amiga_serial_gets(struct console *co, char *s, int len)
-{
-	int ch, cnt = 0;
-
-	while (1) {
-		ch = amiga_serial_console_wait_key(co);
-
-		/* Check for backspace. */
-		if (ch == 8 || ch == 127) {
-			if (cnt == 0) {
-				amiga_serial_putc('\007');
-				continue;
-			}
-			cnt--;
-			amiga_serial_puts("\010 \010");
-			continue;
-		}
-
-		/* Check for enter. */
-		if (ch == 10 || ch == 13)
-			break;
-
-		/* See if line is too long. */
-		if (cnt >= len + 1) {
-			amiga_serial_putc(7);
-			cnt--;
-			continue;
-		}
-
-		/* Store and echo character. */
-		s[cnt++] = ch;
-		amiga_serial_putc(ch);
-	}
-	/* Print enter. */
-	amiga_serial_puts("\r\n");
-	s[cnt] = 0;
-}
-#endif
-
-static int __init amiga_debug_setup(char *arg)
-{
-	if (MACH_IS_AMIGA && !strcmp(arg, "ser")) {
-		/* no initialization required (?) */
-		amiga_console_driver.write = amiga_serial_console_write;
-		register_console(&amiga_console_driver);
-	}
-	return 0;
-}
-
-early_param("debug", amiga_debug_setup);
-
-#ifdef CONFIG_HEARTBEAT
-static void amiga_heartbeat(int on)
-{
-	if (on)
-		ciaa.pra &= ~2;
-	else
-		ciaa.pra |= 2;
-}
-#endif
-
-    /*
-     *  Amiga specific parts of /proc
-     */
-
-static void amiga_get_model(char *model)
-{
-	strcpy(model, amiga_model_name);
-}
-
-
-static void amiga_get_hardware_list(struct seq_file *m)
-{
-	if (AMIGAHW_PRESENT(CHIP_RAM))
-		seq_printf(m, "Chip RAM:\t%ldK\n", amiga_chip_size>>10);
-	seq_printf(m, "PS Freq:\t%dHz\nEClock Freq:\t%ldHz\n",
-			amiga_psfreq, amiga_eclock);
-	if (AMIGAHW_PRESENT(AMI_VIDEO)) {
-		char *type;
-		switch (amiga_chipset) {
-		case CS_OCS:
-			type = "OCS";
-			break;
-		case CS_ECS:
-			type = "ECS";
-			break;
-		case CS_AGA:
-			type = "AGA";
-			break;
-		default:
-			type = "Old or Unknown";
-			break;
-		}
-		seq_printf(m, "Graphics:\t%s\n", type);
-	}
-
-#define AMIGAHW_ANNOUNCE(name, str)			\
-	if (AMIGAHW_PRESENT(name))			\
-		seq_printf (m, "\t%s\n", str)
-
-	seq_printf (m, "Detected hardware:\n");
-
-	AMIGAHW_ANNOUNCE(AMI_VIDEO, "Amiga Video");
-	AMIGAHW_ANNOUNCE(AMI_BLITTER, "Blitter");
-	AMIGAHW_ANNOUNCE(AMBER_FF, "Amber Flicker Fixer");
-	AMIGAHW_ANNOUNCE(AMI_AUDIO, "Amiga Audio");
-	AMIGAHW_ANNOUNCE(AMI_FLOPPY, "Floppy Controller");
-	AMIGAHW_ANNOUNCE(A3000_SCSI, "SCSI Controller WD33C93 (A3000 style)");
-	AMIGAHW_ANNOUNCE(A4000_SCSI, "SCSI Controller NCR53C710 (A4000T style)");
-	AMIGAHW_ANNOUNCE(A1200_IDE, "IDE Interface (A1200 style)");
-	AMIGAHW_ANNOUNCE(A4000_IDE, "IDE Interface (A4000 style)");
-	AMIGAHW_ANNOUNCE(CD_ROM, "Internal CD ROM drive");
-	AMIGAHW_ANNOUNCE(AMI_KEYBOARD, "Keyboard");
-	AMIGAHW_ANNOUNCE(AMI_MOUSE, "Mouse Port");
-	AMIGAHW_ANNOUNCE(AMI_SERIAL, "Serial Port");
-	AMIGAHW_ANNOUNCE(AMI_PARALLEL, "Parallel Port");
-	AMIGAHW_ANNOUNCE(A2000_CLK, "Hardware Clock (A2000 style)");
-	AMIGAHW_ANNOUNCE(A3000_CLK, "Hardware Clock (A3000 style)");
-	AMIGAHW_ANNOUNCE(CHIP_RAM, "Chip RAM");
-	AMIGAHW_ANNOUNCE(PAULA, "Paula 8364");
-	AMIGAHW_ANNOUNCE(DENISE, "Denise 8362");
-	AMIGAHW_ANNOUNCE(DENISE_HR, "Denise 8373");
-	AMIGAHW_ANNOUNCE(LISA, "Lisa 8375");
-	AMIGAHW_ANNOUNCE(AGNUS_PAL, "Normal/Fat PAL Agnus 8367/8371");
-	AMIGAHW_ANNOUNCE(AGNUS_NTSC, "Normal/Fat NTSC Agnus 8361/8370");
-	AMIGAHW_ANNOUNCE(AGNUS_HR_PAL, "Fat Hires PAL Agnus 8372");
-	AMIGAHW_ANNOUNCE(AGNUS_HR_NTSC, "Fat Hires NTSC Agnus 8372");
-	AMIGAHW_ANNOUNCE(ALICE_PAL, "PAL Alice 8374");
-	AMIGAHW_ANNOUNCE(ALICE_NTSC, "NTSC Alice 8374");
-	AMIGAHW_ANNOUNCE(MAGIC_REKICK, "Magic Hard Rekick");
-	AMIGAHW_ANNOUNCE(PCMCIA, "PCMCIA Slot");
-#ifdef CONFIG_ZORRO
-	if (AMIGAHW_PRESENT(ZORRO))
-		seq_printf(m, "\tZorro II%s AutoConfig: %d Expansion "
-				"Device%s\n",
-				AMIGAHW_PRESENT(ZORRO3) ? "I" : "",
-				zorro_num_autocon, zorro_num_autocon == 1 ? "" : "s");
-#endif /* CONFIG_ZORRO */
-
-#undef AMIGAHW_ANNOUNCE
-}
-
-/*
- * The Amiga keyboard driver needs key_maps, but we cannot export it in
- * drivers/char/defkeymap.c, as it is autogenerated
- */
-#ifdef CONFIG_HW_CONSOLE
-EXPORT_SYMBOL_GPL(key_maps);
-#endif
diff --git a/ANDROID_3.4.5/arch/m68k/amiga/pcmcia.c b/ANDROID_3.4.5/arch/m68k/amiga/pcmcia.c
deleted file mode 100644
index 7106f0c3..00000000
--- a/ANDROID_3.4.5/arch/m68k/amiga/pcmcia.c
+++ /dev/null
@@ -1,122 +0,0 @@
-/*
-** asm-m68k/pcmcia.c -- Amiga Linux PCMCIA support
-**                      most information was found by disassembling card.resource
-**                      I'm still looking for an official doc !
-**
-** Copyright 1997 by Alain Malek
-**
-** This file is subject to the terms and conditions of the GNU General Public
-** License.  See the file COPYING in the main directory of this archive
-** for more details.
-**
-** Created: 12/10/97 by Alain Malek
-*/
-
-#include <linux/types.h>
-#include <linux/jiffies.h>
-#include <linux/timer.h>
-#include <linux/module.h>
-
-#include <asm/amigayle.h>
-#include <asm/amipcmcia.h>
-
-/* gayle config byte for program voltage and access speed */
-static unsigned char cfg_byte = GAYLE_CFG_0V|GAYLE_CFG_150NS;
-
-void pcmcia_reset(void)
-{
-	unsigned long reset_start_time = jiffies;
-	unsigned char b;
-
-	gayle_reset = 0x00;
-	while (time_before(jiffies, reset_start_time + 1*HZ/100));
-	b = gayle_reset;
-}
-EXPORT_SYMBOL(pcmcia_reset);
-
-
-/* copy a tuple, including tuple header. return nb bytes copied */
-/* be careful as this may trigger a GAYLE_IRQ_WR interrupt ! */
-
-int pcmcia_copy_tuple(unsigned char tuple_id, void *tuple, int max_len)
-{
-	unsigned char id, *dest;
-	int cnt, pos, len;
-
-	dest = tuple;
-	pos = 0;
-
-	id = gayle_attribute[pos];
-
-	while((id != CISTPL_END) && (pos < 0x10000)) {
-		len = (int)gayle_attribute[pos+2] + 2;
-		if (id == tuple_id) {
-			len = (len > max_len)?max_len:len;
-			for (cnt = 0; cnt < len; cnt++) {
-				*dest++ = gayle_attribute[pos+(cnt<<1)];
-			}
-
-			return len;
-		}
-		pos += len<<1;
-		id = gayle_attribute[pos];
-	}
-
-	return 0;
-}
-EXPORT_SYMBOL(pcmcia_copy_tuple);
-
-void pcmcia_program_voltage(int voltage)
-{
-	unsigned char v;
-
-	switch (voltage) {
-	case PCMCIA_0V:
-		v = GAYLE_CFG_0V;
-		break;
-	case PCMCIA_5V:
-		v = GAYLE_CFG_5V;
-		break;
-	case PCMCIA_12V:
-		v = GAYLE_CFG_12V;
-		break;
-	default:
-		v = GAYLE_CFG_0V;
-	}
-
-	cfg_byte = (cfg_byte & 0xfc) | v;
-	gayle.config = cfg_byte;
-
-}
-EXPORT_SYMBOL(pcmcia_program_voltage);
-
-void pcmcia_access_speed(int speed)
-{
-	unsigned char s;
-
-	if (speed <= PCMCIA_SPEED_100NS)
-		s = GAYLE_CFG_100NS;
-	else if (speed <= PCMCIA_SPEED_150NS)
-		s = GAYLE_CFG_150NS;
-	else if (speed <= PCMCIA_SPEED_250NS)
-		s = GAYLE_CFG_250NS;
-	else
-		s = GAYLE_CFG_720NS;
-
-	cfg_byte = (cfg_byte & 0xf3) | s;
-	gayle.config = cfg_byte;
-}
-EXPORT_SYMBOL(pcmcia_access_speed);
-
-void pcmcia_write_enable(void)
-{
-	gayle.cardstatus = GAYLE_CS_WR|GAYLE_CS_DA;
-}
-EXPORT_SYMBOL(pcmcia_write_enable);
-
-void pcmcia_write_disable(void)
-{
-	gayle.cardstatus = 0;
-}
-EXPORT_SYMBOL(pcmcia_write_disable);
-
diff --git a/ANDROID_3.4.5/arch/m68k/amiga/platform.c b/ANDROID_3.4.5/arch/m68k/amiga/platform.c
deleted file mode 100644
index 7fd8b417..00000000
--- a/ANDROID_3.4.5/arch/m68k/amiga/platform.c
+++ /dev/null
@@ -1,197 +0,0 @@
-/*
- *  Copyright (C) 2007-2009 Geert Uytterhoeven
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file COPYING in the main directory of this archive
- * for more details.
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/zorro.h>
-
-#include <asm/amigahw.h>
-#include <asm/amigayle.h>
-
-
-#ifdef CONFIG_ZORRO
-
-static const struct resource zorro_resources[] __initconst = {
-	/* Zorro II regions (on Zorro II/III) */
-	{
-		.name	= "Zorro II exp",
-		.start	= 0x00e80000,
-		.end	= 0x00efffff,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.name	= "Zorro II mem",
-		.start	= 0x00200000,
-		.end	= 0x009fffff,
-		.flags	= IORESOURCE_MEM,
-	},
-	/* Zorro III regions (on Zorro III only) */
-	{
-		.name	= "Zorro III exp",
-		.start	= 0xff000000,
-		.end	= 0xffffffff,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.name	= "Zorro III cfg",
-		.start	= 0x40000000,
-		.end	= 0x7fffffff,
-		.flags	= IORESOURCE_MEM,
-	}
-};
-
-
-static int __init amiga_init_bus(void)
-{
-	if (!MACH_IS_AMIGA || !AMIGAHW_PRESENT(ZORRO))
-		return -ENODEV;
-
-	platform_device_register_simple("amiga-zorro", -1, zorro_resources,
-					AMIGAHW_PRESENT(ZORRO3) ? 4 : 2);
-	return 0;
-}
-
-subsys_initcall(amiga_init_bus);
-
-
-static int z_dev_present(zorro_id id)
-{
-	unsigned int i;
-
-	for (i = 0; i < zorro_num_autocon; i++)
-		if (zorro_autocon[i].rom.er_Manufacturer == ZORRO_MANUF(id) &&
-		    zorro_autocon[i].rom.er_Product == ZORRO_PROD(id))
-			return 1;
-
-	return 0;
-}
-
-#else /* !CONFIG_ZORRO */
-
-static inline int z_dev_present(zorro_id id) { return 0; }
-
-#endif /* !CONFIG_ZORRO */
-
-
-static const struct resource a3000_scsi_resource __initconst = {
-	.start	= 0xdd0000,
-	.end	= 0xdd00ff,
-	.flags	= IORESOURCE_MEM,
-};
-
-
-static const struct resource a4000t_scsi_resource __initconst = {
-	.start	= 0xdd0000,
-	.end	= 0xdd0fff,
-	.flags	= IORESOURCE_MEM,
-};
-
-
-static const struct resource a1200_ide_resource __initconst = {
-	.start	= 0xda0000,
-	.end	= 0xda1fff,
-	.flags	= IORESOURCE_MEM,
-};
-
-static const struct gayle_ide_platform_data a1200_ide_pdata __initconst = {
-	.base		= 0xda0000,
-	.irqport	= 0xda9000,
-	.explicit_ack	= 1,
-};
-
-
-static const struct resource a4000_ide_resource __initconst = {
-	.start	= 0xdd2000,
-	.end	= 0xdd3fff,
-	.flags	= IORESOURCE_MEM,
-};
-
-static const struct gayle_ide_platform_data a4000_ide_pdata __initconst = {
-	.base		= 0xdd2020,
-	.irqport	= 0xdd3020,
-	.explicit_ack	= 0,
-};
-
-
-static const struct resource amiga_rtc_resource __initconst = {
-	.start	= 0x00dc0000,
-	.end	= 0x00dcffff,
-	.flags	= IORESOURCE_MEM,
-};
-
-
-static int __init amiga_init_devices(void)
-{
-	struct platform_device *pdev;
-
-	if (!MACH_IS_AMIGA)
-		return -ENODEV;
-
-	/* video hardware */
-	if (AMIGAHW_PRESENT(AMI_VIDEO))
-		platform_device_register_simple("amiga-video", -1, NULL, 0);
-
-
-	/* sound hardware */
-	if (AMIGAHW_PRESENT(AMI_AUDIO))
-		platform_device_register_simple("amiga-audio", -1, NULL, 0);
-
-
-	/* storage interfaces */
-	if (AMIGAHW_PRESENT(AMI_FLOPPY))
-		platform_device_register_simple("amiga-floppy", -1, NULL, 0);
-
-	if (AMIGAHW_PRESENT(A3000_SCSI))
-		platform_device_register_simple("amiga-a3000-scsi", -1,
-						&a3000_scsi_resource, 1);
-
-	if (AMIGAHW_PRESENT(A4000_SCSI))
-		platform_device_register_simple("amiga-a4000t-scsi", -1,
-						&a4000t_scsi_resource, 1);
-
-	if (AMIGAHW_PRESENT(A1200_IDE) ||
-	    z_dev_present(ZORRO_PROD_MTEC_VIPER_MK_V_E_MATRIX_530_SCSI_IDE)) {
-		pdev = platform_device_register_simple("amiga-gayle-ide", -1,
-						       &a1200_ide_resource, 1);
-		platform_device_add_data(pdev, &a1200_ide_pdata,
-					 sizeof(a1200_ide_pdata));
-	}
-
-	if (AMIGAHW_PRESENT(A4000_IDE)) {
-		pdev = platform_device_register_simple("amiga-gayle-ide", -1,
-						       &a4000_ide_resource, 1);
-		platform_device_add_data(pdev, &a4000_ide_pdata,
-					 sizeof(a4000_ide_pdata));
-	}
-
-
-	/* other I/O hardware */
-	if (AMIGAHW_PRESENT(AMI_KEYBOARD))
-		platform_device_register_simple("amiga-keyboard", -1, NULL, 0);
-
-	if (AMIGAHW_PRESENT(AMI_MOUSE))
-		platform_device_register_simple("amiga-mouse", -1, NULL, 0);
-
-	if (AMIGAHW_PRESENT(AMI_SERIAL))
-		platform_device_register_simple("amiga-serial", -1, NULL, 0);
-
-	if (AMIGAHW_PRESENT(AMI_PARALLEL))
-		platform_device_register_simple("amiga-parallel", -1, NULL, 0);
-
-
-	/* real time clocks */
-	if (AMIGAHW_PRESENT(A2000_CLK))
-		platform_device_register_simple("rtc-msm6242", -1,
-						&amiga_rtc_resource, 1);
-
-	if (AMIGAHW_PRESENT(A3000_CLK))
-		platform_device_register_simple("rtc-rp5c01", -1,
-						&amiga_rtc_resource, 1);
-
-	return 0;
-}
-
-device_initcall(amiga_init_devices);
diff --git a/ANDROID_3.4.5/arch/m68k/apollo/Makefile b/ANDROID_3.4.5/arch/m68k/apollo/Makefile
deleted file mode 100644
index 76a05796..00000000
--- a/ANDROID_3.4.5/arch/m68k/apollo/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-#
-# Makefile for Linux arch/m68k/amiga source directory
-#
-
-obj-y		:= config.o dn_ints.o
diff --git a/ANDROID_3.4.5/arch/m68k/apollo/config.c b/ANDROID_3.4.5/arch/m68k/apollo/config.c
deleted file mode 100644
index 0a30406b..00000000
--- a/ANDROID_3.4.5/arch/m68k/apollo/config.c
+++ /dev/null
@@ -1,283 +0,0 @@
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/tty.h>
-#include <linux/console.h>
-#include <linux/rtc.h>
-#include <linux/vt_kern.h>
-#include <linux/interrupt.h>
-
-#include <asm/setup.h>
-#include <asm/bootinfo.h>
-#include <asm/pgtable.h>
-#include <asm/apollohw.h>
-#include <asm/irq.h>
-#include <asm/rtc.h>
-#include <asm/machdep.h>
-
-u_long sio01_physaddr;
-u_long sio23_physaddr;
-u_long rtc_physaddr;
-u_long pica_physaddr;
-u_long picb_physaddr;
-u_long cpuctrl_physaddr;
-u_long timer_physaddr;
-u_long apollo_model;
-
-extern void dn_sched_init(irq_handler_t handler);
-extern void dn_init_IRQ(void);
-extern unsigned long dn_gettimeoffset(void);
-extern int dn_dummy_hwclk(int, struct rtc_time *);
-extern int dn_dummy_set_clock_mmss(unsigned long);
-extern void dn_dummy_reset(void);
-#ifdef CONFIG_HEARTBEAT
-static void dn_heartbeat(int on);
-#endif
-static irqreturn_t dn_timer_int(int irq,void *);
-static void dn_get_model(char *model);
-static const char *apollo_models[] = {
-	[APOLLO_DN3000-APOLLO_DN3000] = "DN3000 (Otter)",
-	[APOLLO_DN3010-APOLLO_DN3000] = "DN3010 (Otter)",
-	[APOLLO_DN3500-APOLLO_DN3000] = "DN3500 (Cougar II)",
-	[APOLLO_DN4000-APOLLO_DN3000] = "DN4000 (Mink)",
-	[APOLLO_DN4500-APOLLO_DN3000] = "DN4500 (Roadrunner)"
-};
-
-int apollo_parse_bootinfo(const struct bi_record *record) {
-
-	int unknown = 0;
-	const unsigned long *data = record->data;
-
-	switch(record->tag) {
-		case BI_APOLLO_MODEL:
-			apollo_model=*data;
-			break;
-
-		default:
-			 unknown=1;
-	}
-
-	return unknown;
-}
-
-void dn_setup_model(void) {
-
-
-	printk("Apollo hardware found: ");
-	printk("[%s]\n", apollo_models[apollo_model - APOLLO_DN3000]);
-
-	switch(apollo_model) {
-		case APOLLO_UNKNOWN:
-			panic("Unknown apollo model");
-			break;
-		case APOLLO_DN3000:
-		case APOLLO_DN3010:
-			sio01_physaddr=SAU8_SIO01_PHYSADDR;
-			rtc_physaddr=SAU8_RTC_PHYSADDR;
-			pica_physaddr=SAU8_PICA;
-			picb_physaddr=SAU8_PICB;
-			cpuctrl_physaddr=SAU8_CPUCTRL;
-			timer_physaddr=SAU8_TIMER;
-			break;
-		case APOLLO_DN4000:
-			sio01_physaddr=SAU7_SIO01_PHYSADDR;
-			sio23_physaddr=SAU7_SIO23_PHYSADDR;
-			rtc_physaddr=SAU7_RTC_PHYSADDR;
-			pica_physaddr=SAU7_PICA;
-			picb_physaddr=SAU7_PICB;
-			cpuctrl_physaddr=SAU7_CPUCTRL;
-			timer_physaddr=SAU7_TIMER;
-			break;
-		case APOLLO_DN4500:
-			panic("Apollo model not yet supported");
-			break;
-		case APOLLO_DN3500:
-			sio01_physaddr=SAU7_SIO01_PHYSADDR;
-			sio23_physaddr=SAU7_SIO23_PHYSADDR;
-			rtc_physaddr=SAU7_RTC_PHYSADDR;
-			pica_physaddr=SAU7_PICA;
-			picb_physaddr=SAU7_PICB;
-			cpuctrl_physaddr=SAU7_CPUCTRL;
-			timer_physaddr=SAU7_TIMER;
-			break;
-		default:
-			panic("Undefined apollo model");
-			break;
-	}
-
-
-}
-
-int dn_serial_console_wait_key(struct console *co) {
-
-	while(!(sio01.srb_csrb & 1))
-		barrier();
-	return sio01.rhrb_thrb;
-}
-
-void dn_serial_console_write (struct console *co, const char *str,unsigned int count)
-{
-   while(count--) {
-	if (*str == '\n') {
-	sio01.rhrb_thrb = (unsigned char)'\r';
-	while (!(sio01.srb_csrb & 0x4))
-                ;
-	}
-    sio01.rhrb_thrb = (unsigned char)*str++;
-    while (!(sio01.srb_csrb & 0x4))
-            ;
-  }
-}
-
-void dn_serial_print (const char *str)
-{
-    while (*str) {
-        if (*str == '\n') {
-            sio01.rhrb_thrb = (unsigned char)'\r';
-            while (!(sio01.srb_csrb & 0x4))
-                ;
-        }
-        sio01.rhrb_thrb = (unsigned char)*str++;
-        while (!(sio01.srb_csrb & 0x4))
-            ;
-    }
-}
-
-void __init config_apollo(void)
-{
-	int i;
-
-	dn_setup_model();
-
-	mach_sched_init=dn_sched_init; /* */
-	mach_init_IRQ=dn_init_IRQ;
-	mach_gettimeoffset   = dn_gettimeoffset;
-	mach_max_dma_address = 0xffffffff;
-	mach_hwclk           = dn_dummy_hwclk; /* */
-	mach_set_clock_mmss  = dn_dummy_set_clock_mmss; /* */
-	mach_reset	     = dn_dummy_reset;  /* */
-#ifdef CONFIG_HEARTBEAT
-	mach_heartbeat = dn_heartbeat;
-#endif
-	mach_get_model       = dn_get_model;
-
-	cpuctrl=0xaa00;
-
-	/* clear DMA translation table */
-	for(i=0;i<0x400;i++)
-		addr_xlat_map[i]=0;
-
-}
-
-irqreturn_t dn_timer_int(int irq, void *dev_id)
-{
-	irq_handler_t timer_handler = dev_id;
-
-	volatile unsigned char x;
-
-	timer_handler(irq, dev_id);
-
-	x=*(volatile unsigned char *)(timer+3);
-	x=*(volatile unsigned char *)(timer+5);
-
-	return IRQ_HANDLED;
-}
-
-void dn_sched_init(irq_handler_t timer_routine)
-{
-	/* program timer 1 */
-	*(volatile unsigned char *)(timer+3)=0x01;
-	*(volatile unsigned char *)(timer+1)=0x40;
-	*(volatile unsigned char *)(timer+5)=0x09;
-	*(volatile unsigned char *)(timer+7)=0xc4;
-
-	/* enable IRQ of PIC B */
-	*(volatile unsigned char *)(pica+1)&=(~8);
-
-#if 0
-	printk("*(0x10803) %02x\n",*(volatile unsigned char *)(timer+0x3));
-	printk("*(0x10803) %02x\n",*(volatile unsigned char *)(timer+0x3));
-#endif
-
-	if (request_irq(IRQ_APOLLO, dn_timer_int, 0, "time", timer_routine))
-		pr_err("Couldn't register timer interrupt\n");
-}
-
-unsigned long dn_gettimeoffset(void) {
-
-	return 0xdeadbeef;
-
-}
-
-int dn_dummy_hwclk(int op, struct rtc_time *t) {
-
-
-  if(!op) { /* read */
-    t->tm_sec=rtc->second;
-    t->tm_min=rtc->minute;
-    t->tm_hour=rtc->hours;
-    t->tm_mday=rtc->day_of_month;
-    t->tm_wday=rtc->day_of_week;
-    t->tm_mon=rtc->month;
-    t->tm_year=rtc->year;
-  } else {
-    rtc->second=t->tm_sec;
-    rtc->minute=t->tm_min;
-    rtc->hours=t->tm_hour;
-    rtc->day_of_month=t->tm_mday;
-    if(t->tm_wday!=-1)
-      rtc->day_of_week=t->tm_wday;
-    rtc->month=t->tm_mon;
-    rtc->year=t->tm_year;
-  }
-
-  return 0;
-
-}
-
-int dn_dummy_set_clock_mmss(unsigned long nowtime) {
-
-  printk("set_clock_mmss\n");
-
-  return 0;
-
-}
-
-void dn_dummy_reset(void) {
-
-  dn_serial_print("The end !\n");
-
-  for(;;);
-
-}
-
-void dn_dummy_waitbut(void) {
-
-  dn_serial_print("waitbut\n");
-
-}
-
-static void dn_get_model(char *model)
-{
-    strcpy(model, "Apollo ");
-    if (apollo_model >= APOLLO_DN3000 && apollo_model <= APOLLO_DN4500)
-        strcat(model, apollo_models[apollo_model - APOLLO_DN3000]);
-}
-
-#ifdef CONFIG_HEARTBEAT
-static int dn_cpuctrl=0xff00;
-
-static void dn_heartbeat(int on) {
-
-	if(on) {
-		dn_cpuctrl&=~0x100;
-		cpuctrl=dn_cpuctrl;
-	}
-	else {
-		dn_cpuctrl&=~0x100;
-		dn_cpuctrl|=0x100;
-		cpuctrl=dn_cpuctrl;
-	}
-}
-#endif
-
diff --git a/ANDROID_3.4.5/arch/m68k/apollo/dn_ints.c b/ANDROID_3.4.5/arch/m68k/apollo/dn_ints.c
deleted file mode 100644
index 17be1e7e..00000000
--- a/ANDROID_3.4.5/arch/m68k/apollo/dn_ints.c
+++ /dev/null
@@ -1,47 +0,0 @@
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-
-#include <asm/traps.h>
-#include <asm/apollohw.h>
-
-unsigned int apollo_irq_startup(struct irq_data *data)
-{
-	unsigned int irq = data->irq;
-
-	if (irq < 8)
-		*(volatile unsigned char *)(pica+1) &= ~(1 << irq);
-	else
-		*(volatile unsigned char *)(picb+1) &= ~(1 << (irq - 8));
-	return 0;
-}
-
-void apollo_irq_shutdown(struct irq_data *data)
-{
-	unsigned int irq = data->irq;
-
-	if (irq < 8)
-		*(volatile unsigned char *)(pica+1) |= (1 << irq);
-	else
-		*(volatile unsigned char *)(picb+1) |= (1 << (irq - 8));
-}
-
-void apollo_irq_eoi(struct irq_data *data)
-{
-	*(volatile unsigned char *)(pica) = 0x20;
-	*(volatile unsigned char *)(picb) = 0x20;
-}
-
-static struct irq_chip apollo_irq_chip = {
-	.name           = "apollo",
-	.irq_startup    = apollo_irq_startup,
-	.irq_shutdown   = apollo_irq_shutdown,
-	.irq_eoi	= apollo_irq_eoi,
-};
-
-
-void __init dn_init_IRQ(void)
-{
-	m68k_setup_user_interrupt(VEC_USER + 96, 16);
-	m68k_setup_irq_controller(&apollo_irq_chip, handle_fasteoi_irq,
-				  IRQ_APOLLO, 16);
-}
diff --git a/ANDROID_3.4.5/arch/m68k/atari/Makefile b/ANDROID_3.4.5/arch/m68k/atari/Makefile
deleted file mode 100644
index 0cac7233..00000000
--- a/ANDROID_3.4.5/arch/m68k/atari/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# Makefile for Linux arch/m68k/atari source directory
-#
-
-obj-y		:= config.o time.o debug.o ataints.o stdma.o \
-			atasound.o stram.o
-
-obj-$(CONFIG_ATARI_KBD_CORE)	+= atakeyb.o
diff --git a/ANDROID_3.4.5/arch/m68k/atari/ataints.c b/ANDROID_3.4.5/arch/m68k/atari/ataints.c
deleted file mode 100644
index 783d8f02..00000000
--- a/ANDROID_3.4.5/arch/m68k/atari/ataints.c
+++ /dev/null
@@ -1,235 +0,0 @@
-/*
- * arch/m68k/atari/ataints.c -- Atari Linux interrupt handling code
- *
- * 5/2/94 Roman Hodek:
- *  Added support for TT interrupts; setup for TT SCU (may someone has
- *  twiddled there and we won't get the right interrupts :-()
- *
- *  Major change: The device-independent code in m68k/ints.c didn't know
- *  about non-autovec ints yet. It hardcoded the number of possible ints to
- *  7 (IRQ1...IRQ7). But the Atari has lots of non-autovec ints! I made the
- *  number of possible ints a constant defined in interrupt.h, which is
- *  47 for the Atari. So we can call request_irq() for all Atari interrupts
- *  just the normal way. Additionally, all vectors >= 48 are initialized to
- *  call trap() instead of inthandler(). This must be changed here, too.
- *
- * 1995-07-16 Lars Brinkhoff <f93labr@dd.chalmers.se>:
- *  Corrected a bug in atari_add_isr() which rejected all SCC
- *  interrupt sources if there were no TT MFP!
- *
- * 12/13/95: New interface functions atari_level_triggered_int() and
- *  atari_register_vme_int() as support for level triggered VME interrupts.
- *
- * 02/12/96: (Roman)
- *  Total rewrite of Atari interrupt handling, for new scheme see comments
- *  below.
- *
- * 1996-09-03 lars brinkhoff <f93labr@dd.chalmers.se>:
- *  Added new function atari_unregister_vme_int(), and
- *  modified atari_register_vme_int() as well as IS_VALID_INTNO()
- *  to work with it.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file COPYING in the main directory of this archive
- * for more details.
- *
- */
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/kernel_stat.h>
-#include <linux/init.h>
-#include <linux/seq_file.h>
-#include <linux/module.h>
-
-#include <asm/traps.h>
-
-#include <asm/atarihw.h>
-#include <asm/atariints.h>
-#include <asm/atari_stdma.h>
-#include <asm/irq.h>
-#include <asm/entry.h>
-
-
-/*
- * Atari interrupt handling scheme:
- * --------------------------------
- *
- * All interrupt source have an internal number (defined in
- * <asm/atariints.h>): Autovector interrupts are 1..7, then follow ST-MFP,
- * TT-MFP, SCC, and finally VME interrupts. Vector numbers for the latter can
- * be allocated by atari_register_vme_int().
- */
-
-/*
- * Bitmap for free interrupt vector numbers
- * (new vectors starting from 0x70 can be allocated by
- * atari_register_vme_int())
- */
-static int free_vme_vec_bitmap;
-
-/* GK:
- * HBL IRQ handler for Falcon. Nobody needs it :-)
- * ++andreas: raise ipl to disable further HBLANK interrupts.
- */
-asmlinkage void falcon_hblhandler(void);
-asm(".text\n"
-__ALIGN_STR "\n\t"
-"falcon_hblhandler:\n\t"
-	"orw	#0x200,%sp@\n\t"	/* set saved ipl to 2 */
-	"rte");
-
-extern void atari_microwire_cmd(int cmd);
-
-static unsigned int atari_irq_startup(struct irq_data *data)
-{
-	unsigned int irq = data->irq;
-
-	m68k_irq_startup(data);
-	atari_turnon_irq(irq);
-	atari_enable_irq(irq);
-	return 0;
-}
-
-static void atari_irq_shutdown(struct irq_data *data)
-{
-	unsigned int irq = data->irq;
-
-	atari_disable_irq(irq);
-	atari_turnoff_irq(irq);
-	m68k_irq_shutdown(data);
-
-	if (irq == IRQ_AUTO_4)
-	    vectors[VEC_INT4] = falcon_hblhandler;
-}
-
-static void atari_irq_enable(struct irq_data *data)
-{
-	atari_enable_irq(data->irq);
-}
-
-static void atari_irq_disable(struct irq_data *data)
-{
-	atari_disable_irq(data->irq);
-}
-
-static struct irq_chip atari_irq_chip = {
-	.name		= "atari",
-	.irq_startup	= atari_irq_startup,
-	.irq_shutdown	= atari_irq_shutdown,
-	.irq_enable	= atari_irq_enable,
-	.irq_disable	= atari_irq_disable,
-};
-
-/*
- * void atari_init_IRQ (void)
- *
- * Parameters:	None
- *
- * Returns:	Nothing
- *
- * This function should be called during kernel startup to initialize
- * the atari IRQ handling routines.
- */
-
-void __init atari_init_IRQ(void)
-{
-	m68k_setup_user_interrupt(VEC_USER, NUM_ATARI_SOURCES - IRQ_USER);
-	m68k_setup_irq_controller(&atari_irq_chip, handle_simple_irq, 1,
-				  NUM_ATARI_SOURCES - 1);
-
-	/* Initialize the MFP(s) */
-
-#ifdef ATARI_USE_SOFTWARE_EOI
-	st_mfp.vec_adr  = 0x48;	/* Software EOI-Mode */
-#else
-	st_mfp.vec_adr  = 0x40;	/* Automatic EOI-Mode */
-#endif
-	st_mfp.int_en_a = 0x00;	/* turn off MFP-Ints */
-	st_mfp.int_en_b = 0x00;
-	st_mfp.int_mk_a = 0xff;	/* no Masking */
-	st_mfp.int_mk_b = 0xff;
-
-	if (ATARIHW_PRESENT(TT_MFP)) {
-#ifdef ATARI_USE_SOFTWARE_EOI
-		tt_mfp.vec_adr  = 0x58;		/* Software EOI-Mode */
-#else
-		tt_mfp.vec_adr  = 0x50;		/* Automatic EOI-Mode */
-#endif
-		tt_mfp.int_en_a = 0x00;		/* turn off MFP-Ints */
-		tt_mfp.int_en_b = 0x00;
-		tt_mfp.int_mk_a = 0xff;		/* no Masking */
-		tt_mfp.int_mk_b = 0xff;
-	}
-
-	if (ATARIHW_PRESENT(SCC) && !atari_SCC_reset_done) {
-		atari_scc.cha_a_ctrl = 9;
-		MFPDELAY();
-		atari_scc.cha_a_ctrl = (char) 0xc0; /* hardware reset */
-	}
-
-	if (ATARIHW_PRESENT(SCU)) {
-		/* init the SCU if present */
-		tt_scu.sys_mask = 0x10;		/* enable VBL (for the cursor) and
-									 * disable HSYNC interrupts (who
-									 * needs them?)  MFP and SCC are
-									 * enabled in VME mask
-									 */
-		tt_scu.vme_mask = 0x60;		/* enable MFP and SCC ints */
-	} else {
-		/* If no SCU and no Hades, the HSYNC interrupt needs to be
-		 * disabled this way. (Else _inthandler in kernel/sys_call.S
-		 * gets overruns)
-		 */
-
-		vectors[VEC_INT2] = falcon_hblhandler;
-		vectors[VEC_INT4] = falcon_hblhandler;
-	}
-
-	if (ATARIHW_PRESENT(PCM_8BIT) && ATARIHW_PRESENT(MICROWIRE)) {
-		/* Initialize the LM1992 Sound Controller to enable
-		   the PSG sound.  This is misplaced here, it should
-		   be in an atasound_init(), that doesn't exist yet. */
-		atari_microwire_cmd(MW_LM1992_PSG_HIGH);
-	}
-
-	stdma_init();
-
-	/* Initialize the PSG: all sounds off, both ports output */
-	sound_ym.rd_data_reg_sel = 7;
-	sound_ym.wd_data = 0xff;
-}
-
-
-/*
- * atari_register_vme_int() returns the number of a free interrupt vector for
- * hardware with a programmable int vector (probably a VME board).
- */
-
-unsigned long atari_register_vme_int(void)
-{
-	int i;
-
-	for (i = 0; i < 32; i++)
-		if ((free_vme_vec_bitmap & (1 << i)) == 0)
-			break;
-
-	if (i == 16)
-		return 0;
-
-	free_vme_vec_bitmap |= 1 << i;
-	return VME_SOURCE_BASE + i;
-}
-EXPORT_SYMBOL(atari_register_vme_int);
-
-
-void atari_unregister_vme_int(unsigned long irq)
-{
-	if (irq >= VME_SOURCE_BASE && irq < VME_SOURCE_BASE + VME_MAX_SOURCES) {
-		irq -= VME_SOURCE_BASE;
-		free_vme_vec_bitmap &= ~(1 << irq);
-	}
-}
-EXPORT_SYMBOL(atari_unregister_vme_int);
-
-
diff --git a/ANDROID_3.4.5/arch/m68k/atari/atakeyb.c b/ANDROID_3.4.5/arch/m68k/atari/atakeyb.c
deleted file mode 100644
index 95022b04..00000000
--- a/ANDROID_3.4.5/arch/m68k/atari/atakeyb.c
+++ /dev/null
@@ -1,638 +0,0 @@
-/*
- * Atari Keyboard driver for 680x0 Linux
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file COPYING in the main directory of this archive
- * for more details.
- */
-
-/*
- * Atari support by Robert de Vries
- * enhanced by Bjoern Brauel and Roman Hodek
- *
- * 2.6 and input cleanup (removed autorepeat stuff) for 2.6.21
- * 06/07 Michael Schmitz
- */
-
-#include <linux/module.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/errno.h>
-#include <linux/keyboard.h>
-#include <linux/delay.h>
-#include <linux/timer.h>
-#include <linux/kd.h>
-#include <linux/random.h>
-#include <linux/init.h>
-#include <linux/kbd_kern.h>
-
-#include <asm/atariints.h>
-#include <asm/atarihw.h>
-#include <asm/atarikb.h>
-#include <asm/atari_joystick.h>
-#include <asm/irq.h>
-
-
-/* Hook for MIDI serial driver */
-void (*atari_MIDI_interrupt_hook) (void);
-/* Hook for keyboard inputdev  driver */
-void (*atari_input_keyboard_interrupt_hook) (unsigned char, char);
-/* Hook for mouse inputdev  driver */
-void (*atari_input_mouse_interrupt_hook) (char *);
-EXPORT_SYMBOL(atari_input_keyboard_interrupt_hook);
-EXPORT_SYMBOL(atari_input_mouse_interrupt_hook);
-
-/* variables for IKBD self test: */
-
-/* state: 0: off; >0: in progress; >1: 0xf1 received */
-static volatile int ikbd_self_test;
-/* timestamp when last received a char */
-static volatile unsigned long self_test_last_rcv;
-/* bitmap of keys reported as broken */
-static unsigned long broken_keys[128/(sizeof(unsigned long)*8)] = { 0, };
-
-#define BREAK_MASK	(0x80)
-
-/*
- * ++roman: The following changes were applied manually:
- *
- *  - The Alt (= Meta) key works in combination with Shift and
- *    Control, e.g. Alt+Shift+a sends Meta-A (0xc1), Alt+Control+A sends
- *    Meta-Ctrl-A (0x81) ...
- *
- *  - The parentheses on the keypad send '(' and ')' with all
- *    modifiers (as would do e.g. keypad '+'), but they cannot be used as
- *    application keys (i.e. sending Esc O c).
- *
- *  - HELP and UNDO are mapped to be F21 and F24, resp, that send the
- *    codes "\E[M" and "\E[P". (This is better than the old mapping to
- *    F11 and F12, because these codes are on Shift+F1/2 anyway.) This
- *    way, applications that allow their own keyboard mappings
- *    (e.g. tcsh, X Windows) can be configured to use them in the way
- *    the label suggests (providing help or undoing).
- *
- *  - Console switching is done with Alt+Fx (consoles 1..10) and
- *    Shift+Alt+Fx (consoles 11..20).
- *
- *  - The misc. special function implemented in the kernel are mapped
- *    to the following key combinations:
- *
- *      ClrHome          -> Home/Find
- *      Shift + ClrHome  -> End/Select
- *      Shift + Up       -> Page Up
- *      Shift + Down     -> Page Down
- *      Alt + Help       -> show system status
- *      Shift + Help     -> show memory info
- *      Ctrl + Help      -> show registers
- *      Ctrl + Alt + Del -> Reboot
- *      Alt + Undo       -> switch to last console
- *      Shift + Undo     -> send interrupt
- *      Alt + Insert     -> stop/start output (same as ^S/^Q)
- *      Alt + Up         -> Scroll back console (if implemented)
- *      Alt + Down       -> Scroll forward console (if implemented)
- *      Alt + CapsLock   -> NumLock
- *
- * ++Andreas:
- *
- *  - Help mapped to K_HELP
- *  - Undo mapped to K_UNDO (= K_F246)
- *  - Keypad Left/Right Parenthesis mapped to new K_PPAREN[LR]
- */
-
-typedef enum kb_state_t {
-	KEYBOARD, AMOUSE, RMOUSE, JOYSTICK, CLOCK, RESYNC
-} KB_STATE_T;
-
-#define	IS_SYNC_CODE(sc)	((sc) >= 0x04 && (sc) <= 0xfb)
-
-typedef struct keyboard_state {
-	unsigned char buf[6];
-	int len;
-	KB_STATE_T state;
-} KEYBOARD_STATE;
-
-KEYBOARD_STATE kb_state;
-
-/* ++roman: If a keyboard overrun happened, we can't tell in general how much
- * bytes have been lost and in which state of the packet structure we are now.
- * This usually causes keyboards bytes to be interpreted as mouse movements
- * and vice versa, which is very annoying. It seems better to throw away some
- * bytes (that are usually mouse bytes) than to misinterpret them. Therefore I
- * introduced the RESYNC state for IKBD data. In this state, the bytes up to
- * one that really looks like a key event (0x04..0xf2) or the start of a mouse
- * packet (0xf8..0xfb) are thrown away, but at most 2 bytes. This at least
- * speeds up the resynchronization of the event structure, even if maybe a
- * mouse movement is lost. However, nothing is perfect. For bytes 0x01..0x03,
- * it's really hard to decide whether they're mouse or keyboard bytes. Since
- * overruns usually occur when moving the Atari mouse rapidly, they're seen as
- * mouse bytes here. If this is wrong, only a make code of the keyboard gets
- * lost, which isn't too bad. Losing a break code would be disastrous,
- * because then the keyboard repeat strikes...
- */
-
-static irqreturn_t atari_keyboard_interrupt(int irq, void *dummy)
-{
-	u_char acia_stat;
-	int scancode;
-	int break_flag;
-
-repeat:
-	if (acia.mid_ctrl & ACIA_IRQ)
-		if (atari_MIDI_interrupt_hook)
-			atari_MIDI_interrupt_hook();
-	acia_stat = acia.key_ctrl;
-	/* check out if the interrupt came from this ACIA */
-	if (!((acia_stat | acia.mid_ctrl) & ACIA_IRQ))
-		return IRQ_HANDLED;
-
-	if (acia_stat & ACIA_OVRN) {
-		/* a very fast typist or a slow system, give a warning */
-		/* ...happens often if interrupts were disabled for too long */
-		printk(KERN_DEBUG "Keyboard overrun\n");
-		scancode = acia.key_data;
-		if (ikbd_self_test)
-			/* During self test, don't do resyncing, just process the code */
-			goto interpret_scancode;
-		else if (IS_SYNC_CODE(scancode)) {
-			/* This code seem already to be the start of a new packet or a
-			 * single scancode */
-			kb_state.state = KEYBOARD;
-			goto interpret_scancode;
-		} else {
-			/* Go to RESYNC state and skip this byte */
-			kb_state.state = RESYNC;
-			kb_state.len = 1;	/* skip max. 1 another byte */
-			goto repeat;
-		}
-	}
-
-	if (acia_stat & ACIA_RDRF) {
-		/* received a character */
-		scancode = acia.key_data;	/* get it or reset the ACIA, I'll get it! */
-		tasklet_schedule(&keyboard_tasklet);
-	interpret_scancode:
-		switch (kb_state.state) {
-		case KEYBOARD:
-			switch (scancode) {
-			case 0xF7:
-				kb_state.state = AMOUSE;
-				kb_state.len = 0;
-				break;
-
-			case 0xF8:
-			case 0xF9:
-			case 0xFA:
-			case 0xFB:
-				kb_state.state = RMOUSE;
-				kb_state.len = 1;
-				kb_state.buf[0] = scancode;
-				break;
-
-			case 0xFC:
-				kb_state.state = CLOCK;
-				kb_state.len = 0;
-				break;
-
-			case 0xFE:
-			case 0xFF:
-				kb_state.state = JOYSTICK;
-				kb_state.len = 1;
-				kb_state.buf[0] = scancode;
-				break;
-
-			case 0xF1:
-				/* during self-test, note that 0xf1 received */
-				if (ikbd_self_test) {
-					++ikbd_self_test;
-					self_test_last_rcv = jiffies;
-					break;
-				}
-				/* FALL THROUGH */
-
-			default:
-				break_flag = scancode & BREAK_MASK;
-				scancode &= ~BREAK_MASK;
-				if (ikbd_self_test) {
-					/* Scancodes sent during the self-test stand for broken
-					 * keys (keys being down). The code *should* be a break
-					 * code, but nevertheless some AT keyboard interfaces send
-					 * make codes instead. Therefore, simply ignore
-					 * break_flag...
-					 */
-					int keyval, keytyp;
-
-					set_bit(scancode, broken_keys);
-					self_test_last_rcv = jiffies;
-					/* new Linux scancodes; approx. */
-					keyval = scancode;
-					keytyp = KTYP(keyval) - 0xf0;
-					keyval = KVAL(keyval);
-
-					printk(KERN_WARNING "Key with scancode %d ", scancode);
-					if (keytyp == KT_LATIN || keytyp == KT_LETTER) {
-						if (keyval < ' ')
-							printk("('^%c') ", keyval + '@');
-						else
-							printk("('%c') ", keyval);
-					}
-					printk("is broken -- will be ignored.\n");
-					break;
-				} else if (test_bit(scancode, broken_keys))
-					break;
-
-				if (atari_input_keyboard_interrupt_hook)
-					atari_input_keyboard_interrupt_hook((unsigned char)scancode, !break_flag);
-				break;
-			}
-			break;
-
-		case AMOUSE:
-			kb_state.buf[kb_state.len++] = scancode;
-			if (kb_state.len == 5) {
-				kb_state.state = KEYBOARD;
-				/* not yet used */
-				/* wake up someone waiting for this */
-			}
-			break;
-
-		case RMOUSE:
-			kb_state.buf[kb_state.len++] = scancode;
-			if (kb_state.len == 3) {
-				kb_state.state = KEYBOARD;
-				if (atari_input_mouse_interrupt_hook)
-					atari_input_mouse_interrupt_hook(kb_state.buf);
-			}
-			break;
-
-		case JOYSTICK:
-			kb_state.buf[1] = scancode;
-			kb_state.state = KEYBOARD;
-#ifdef FIXED_ATARI_JOYSTICK
-			atari_joystick_interrupt(kb_state.buf);
-#endif
-			break;
-
-		case CLOCK:
-			kb_state.buf[kb_state.len++] = scancode;
-			if (kb_state.len == 6) {
-				kb_state.state = KEYBOARD;
-				/* wake up someone waiting for this.
-				   But will this ever be used, as Linux keeps its own time.
-				   Perhaps for synchronization purposes? */
-				/* wake_up_interruptible(&clock_wait); */
-			}
-			break;
-
-		case RESYNC:
-			if (kb_state.len <= 0 || IS_SYNC_CODE(scancode)) {
-				kb_state.state = KEYBOARD;
-				goto interpret_scancode;
-			}
-			kb_state.len--;
-			break;
-		}
-	}
-
-#if 0
-	if (acia_stat & ACIA_CTS)
-		/* cannot happen */;
-#endif
-
-	if (acia_stat & (ACIA_FE | ACIA_PE)) {
-		printk("Error in keyboard communication\n");
-	}
-
-	/* handle_scancode() can take a lot of time, so check again if
-	 * some character arrived
-	 */
-	goto repeat;
-}
-
-/*
- * I write to the keyboard without using interrupts, I poll instead.
- * This takes for the maximum length string allowed (7) at 7812.5 baud
- * 8 data 1 start 1 stop bit: 9.0 ms
- * If this takes too long for normal operation, interrupt driven writing
- * is the solution. (I made a feeble attempt in that direction but I
- * kept it simple for now.)
- */
-void ikbd_write(const char *str, int len)
-{
-	u_char acia_stat;
-
-	if ((len < 1) || (len > 7))
-		panic("ikbd: maximum string length exceeded");
-	while (len) {
-		acia_stat = acia.key_ctrl;
-		if (acia_stat & ACIA_TDRE) {
-			acia.key_data = *str++;
-			len--;
-		}
-	}
-}
-
-/* Reset (without touching the clock) */
-void ikbd_reset(void)
-{
-	static const char cmd[2] = { 0x80, 0x01 };
-
-	ikbd_write(cmd, 2);
-
-	/*
-	 * if all's well code 0xF1 is returned, else the break codes of
-	 * all keys making contact
-	 */
-}
-
-/* Set mouse button action */
-void ikbd_mouse_button_action(int mode)
-{
-	char cmd[2] = { 0x07, mode };
-
-	ikbd_write(cmd, 2);
-}
-
-/* Set relative mouse position reporting */
-void ikbd_mouse_rel_pos(void)
-{
-	static const char cmd[1] = { 0x08 };
-
-	ikbd_write(cmd, 1);
-}
-EXPORT_SYMBOL(ikbd_mouse_rel_pos);
-
-/* Set absolute mouse position reporting */
-void ikbd_mouse_abs_pos(int xmax, int ymax)
-{
-	char cmd[5] = { 0x09, xmax>>8, xmax&0xFF, ymax>>8, ymax&0xFF };
-
-	ikbd_write(cmd, 5);
-}
-
-/* Set mouse keycode mode */
-void ikbd_mouse_kbd_mode(int dx, int dy)
-{
-	char cmd[3] = { 0x0A, dx, dy };
-
-	ikbd_write(cmd, 3);
-}
-
-/* Set mouse threshold */
-void ikbd_mouse_thresh(int x, int y)
-{
-	char cmd[3] = { 0x0B, x, y };
-
-	ikbd_write(cmd, 3);
-}
-EXPORT_SYMBOL(ikbd_mouse_thresh);
-
-/* Set mouse scale */
-void ikbd_mouse_scale(int x, int y)
-{
-	char cmd[3] = { 0x0C, x, y };
-
-	ikbd_write(cmd, 3);
-}
-
-/* Interrogate mouse position */
-void ikbd_mouse_pos_get(int *x, int *y)
-{
-	static const char cmd[1] = { 0x0D };
-
-	ikbd_write(cmd, 1);
-
-	/* wait for returning bytes */
-}
-
-/* Load mouse position */
-void ikbd_mouse_pos_set(int x, int y)
-{
-	char cmd[6] = { 0x0E, 0x00, x>>8, x&0xFF, y>>8, y&0xFF };
-
-	ikbd_write(cmd, 6);
-}
-
-/* Set Y=0 at bottom */
-void ikbd_mouse_y0_bot(void)
-{
-	static const char cmd[1] = { 0x0F };
-
-	ikbd_write(cmd, 1);
-}
-
-/* Set Y=0 at top */
-void ikbd_mouse_y0_top(void)
-{
-	static const char cmd[1] = { 0x10 };
-
-	ikbd_write(cmd, 1);
-}
-EXPORT_SYMBOL(ikbd_mouse_y0_top);
-
-/* Resume */
-void ikbd_resume(void)
-{
-	static const char cmd[1] = { 0x11 };
-
-	ikbd_write(cmd, 1);
-}
-
-/* Disable mouse */
-void ikbd_mouse_disable(void)
-{
-	static const char cmd[1] = { 0x12 };
-
-	ikbd_write(cmd, 1);
-}
-EXPORT_SYMBOL(ikbd_mouse_disable);
-
-/* Pause output */
-void ikbd_pause(void)
-{
-	static const char cmd[1] = { 0x13 };
-
-	ikbd_write(cmd, 1);
-}
-
-/* Set joystick event reporting */
-void ikbd_joystick_event_on(void)
-{
-	static const char cmd[1] = { 0x14 };
-
-	ikbd_write(cmd, 1);
-}
-
-/* Set joystick interrogation mode */
-void ikbd_joystick_event_off(void)
-{
-	static const char cmd[1] = { 0x15 };
-
-	ikbd_write(cmd, 1);
-}
-
-/* Joystick interrogation */
-void ikbd_joystick_get_state(void)
-{
-	static const char cmd[1] = { 0x16 };
-
-	ikbd_write(cmd, 1);
-}
-
-#if 0
-/* This disables all other ikbd activities !!!! */
-/* Set joystick monitoring */
-void ikbd_joystick_monitor(int rate)
-{
-	static const char cmd[2] = { 0x17, rate };
-
-	ikbd_write(cmd, 2);
-
-	kb_state.state = JOYSTICK_MONITOR;
-}
-#endif
-
-/* some joystick routines not in yet (0x18-0x19) */
-
-/* Disable joysticks */
-void ikbd_joystick_disable(void)
-{
-	static const char cmd[1] = { 0x1A };
-
-	ikbd_write(cmd, 1);
-}
-
-/* Time-of-day clock set */
-void ikbd_clock_set(int year, int month, int day, int hour, int minute, int second)
-{
-	char cmd[7] = { 0x1B, year, month, day, hour, minute, second };
-
-	ikbd_write(cmd, 7);
-}
-
-/* Interrogate time-of-day clock */
-void ikbd_clock_get(int *year, int *month, int *day, int *hour, int *minute, int second)
-{
-	static const char cmd[1] = { 0x1C };
-
-	ikbd_write(cmd, 1);
-}
-
-/* Memory load */
-void ikbd_mem_write(int address, int size, char *data)
-{
-	panic("Attempt to write data into keyboard memory");
-}
-
-/* Memory read */
-void ikbd_mem_read(int address, char data[6])
-{
-	char cmd[3] = { 0x21, address>>8, address&0xFF };
-
-	ikbd_write(cmd, 3);
-
-	/* receive data and put it in data */
-}
-
-/* Controller execute */
-void ikbd_exec(int address)
-{
-	char cmd[3] = { 0x22, address>>8, address&0xFF };
-
-	ikbd_write(cmd, 3);
-}
-
-/* Status inquiries (0x87-0x9A) not yet implemented */
-
-/* Set the state of the caps lock led. */
-void atari_kbd_leds(unsigned int leds)
-{
-	char cmd[6] = {32, 0, 4, 1, 254 + ((leds & 4) != 0), 0};
-
-	ikbd_write(cmd, 6);
-}
-
-/*
- * The original code sometimes left the interrupt line of
- * the ACIAs low forever. I hope, it is fixed now.
- *
- * Martin Rogge, 20 Aug 1995
- */
-
-static int atari_keyb_done = 0;
-
-int atari_keyb_init(void)
-{
-	int error;
-
-	if (atari_keyb_done)
-		return 0;
-
-	kb_state.state = KEYBOARD;
-	kb_state.len = 0;
-
-	error = request_irq(IRQ_MFP_ACIA, atari_keyboard_interrupt,
-			    IRQ_TYPE_SLOW, "keyboard,mouse,MIDI",
-			    atari_keyboard_interrupt);
-	if (error)
-		return error;
-
-	atari_turnoff_irq(IRQ_MFP_ACIA);
-	do {
-		/* reset IKBD ACIA */
-		acia.key_ctrl = ACIA_RESET |
-				((atari_switches & ATARI_SWITCH_IKBD) ?
-				 ACIA_RHTID : 0);
-		(void)acia.key_ctrl;
-		(void)acia.key_data;
-
-		/* reset MIDI ACIA */
-		acia.mid_ctrl = ACIA_RESET |
-				((atari_switches & ATARI_SWITCH_MIDI) ?
-				 ACIA_RHTID : 0);
-		(void)acia.mid_ctrl;
-		(void)acia.mid_data;
-
-		/* divide 500kHz by 64 gives 7812.5 baud */
-		/* 8 data no parity 1 start 1 stop bit */
-		/* receive interrupt enabled */
-		/* RTS low (except if switch selected), transmit interrupt disabled */
-		acia.key_ctrl = (ACIA_DIV64|ACIA_D8N1S|ACIA_RIE) |
-				((atari_switches & ATARI_SWITCH_IKBD) ?
-				 ACIA_RHTID : ACIA_RLTID);
-
-		acia.mid_ctrl = ACIA_DIV16 | ACIA_D8N1S |
-				((atari_switches & ATARI_SWITCH_MIDI) ?
-				 ACIA_RHTID : 0);
-
-	/* make sure the interrupt line is up */
-	} while ((st_mfp.par_dt_reg & 0x10) == 0);
-
-	/* enable ACIA Interrupts */
-	st_mfp.active_edge &= ~0x10;
-	atari_turnon_irq(IRQ_MFP_ACIA);
-
-	ikbd_self_test = 1;
-	ikbd_reset();
-	/* wait for a period of inactivity (here: 0.25s), then assume the IKBD's
-	 * self-test is finished */
-	self_test_last_rcv = jiffies;
-	while (time_before(jiffies, self_test_last_rcv + HZ/4))
-		barrier();
-	/* if not incremented: no 0xf1 received */
-	if (ikbd_self_test == 1)
-		printk(KERN_ERR "WARNING: keyboard self test failed!\n");
-	ikbd_self_test = 0;
-
-	ikbd_mouse_disable();
-	ikbd_joystick_disable();
-
-#ifdef FIXED_ATARI_JOYSTICK
-	atari_joystick_init();
-#endif
-
-	// flag init done
-	atari_keyb_done = 1;
-	return 0;
-}
-EXPORT_SYMBOL_GPL(atari_keyb_init);
diff --git a/ANDROID_3.4.5/arch/m68k/atari/atasound.c b/ANDROID_3.4.5/arch/m68k/atari/atasound.c
deleted file mode 100644
index 1c1181eb..00000000
--- a/ANDROID_3.4.5/arch/m68k/atari/atasound.c
+++ /dev/null
@@ -1,110 +0,0 @@
-/*
- * linux/arch/m68k/atari/atasound.c
- *
- * ++Geert: Moved almost all stuff to linux/drivers/sound/
- *
- * The author of atari_nosound, atari_mksound and atari_microwire_cmd is
- * unknown. (++roman: That's me... :-)
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file COPYING in the main directory of this archive
- * for more details.
- *
- * 1998-05-31 ++andreas: atari_mksound rewritten to always use the envelope,
- *			 no timer, atari_nosound removed.
- *
- */
-
-
-#include <linux/sched.h>
-#include <linux/timer.h>
-#include <linux/major.h>
-#include <linux/fcntl.h>
-#include <linux/errno.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-
-#include <asm/atarihw.h>
-#include <asm/irq.h>
-#include <asm/pgtable.h>
-#include <asm/atariints.h>
-
-
-/*
- * stuff from the old atasound.c
- */
-
-void atari_microwire_cmd (int cmd)
-{
-	tt_microwire.mask = 0x7ff;
-	tt_microwire.data = MW_LM1992_ADDR | cmd;
-
-	/* Busy wait for data being completely sent :-( */
-	while( tt_microwire.mask != 0x7ff)
-		;
-}
-EXPORT_SYMBOL(atari_microwire_cmd);
-
-
-/* PSG base frequency */
-#define	PSG_FREQ	125000
-/* PSG envelope base frequency times 10 */
-#define PSG_ENV_FREQ_10	78125
-
-void atari_mksound (unsigned int hz, unsigned int ticks)
-{
-	/* Generates sound of some frequency for some number of clock
-	   ticks.  */
-	unsigned long flags;
-	unsigned char tmp;
-	int period;
-
-	local_irq_save(flags);
-
-
-	/* Disable generator A in mixer control.  */
-	sound_ym.rd_data_reg_sel = 7;
-	tmp = sound_ym.rd_data_reg_sel;
-	tmp |= 011;
-	sound_ym.wd_data = tmp;
-
-	if (hz) {
-	    /* Convert from frequency value to PSG period value (base
-	       frequency 125 kHz).  */
-
-	    period = PSG_FREQ / hz;
-
-	    if (period > 0xfff) period = 0xfff;
-
-	/* Set generator A frequency to hz.  */
-	sound_ym.rd_data_reg_sel = 0;
-	sound_ym.wd_data = period & 0xff;
-	sound_ym.rd_data_reg_sel = 1;
-	sound_ym.wd_data = (period >> 8) & 0xf;
-	if (ticks) {
-		/* Set length of envelope (max 8 sec).  */
-		int length = (ticks * PSG_ENV_FREQ_10) / HZ / 10;
-
-		if (length > 0xffff) length = 0xffff;
-		sound_ym.rd_data_reg_sel = 11;
-		sound_ym.wd_data = length & 0xff;
-		sound_ym.rd_data_reg_sel = 12;
-		sound_ym.wd_data = length >> 8;
-		/* Envelope form: max -> min single.  */
-		sound_ym.rd_data_reg_sel = 13;
-		sound_ym.wd_data = 0;
-		/* Use envelope for generator A.  */
-		sound_ym.rd_data_reg_sel = 8;
-		sound_ym.wd_data = 0x10;
-	} else {
-		/* Set generator A level to maximum, no envelope.  */
-		sound_ym.rd_data_reg_sel = 8;
-		sound_ym.wd_data = 15;
-	}
-	/* Turn on generator A in mixer control.  */
-	sound_ym.rd_data_reg_sel = 7;
-	tmp &= ~1;
-	sound_ym.wd_data = tmp;
-	}
-	local_irq_restore(flags);
-}
diff --git a/ANDROID_3.4.5/arch/m68k/atari/config.c b/ANDROID_3.4.5/arch/m68k/atari/config.c
deleted file mode 100644
index d8eb3274..00000000
--- a/ANDROID_3.4.5/arch/m68k/atari/config.c
+++ /dev/null
@@ -1,657 +0,0 @@
-/*
- *  linux/arch/m68k/atari/config.c
- *
- *  Copyright (C) 1994 Bjoern Brauel
- *
- *  5/2/94 Roman Hodek:
- *    Added setting of time_adj to get a better clock.
- *
- *  5/14/94 Roman Hodek:
- *    gettod() for TT
- *
- *  5/15/94 Roman Hodek:
- *    hard_reset_now() for Atari (and others?)
- *
- *  94/12/30 Andreas Schwab:
- *    atari_sched_init fixed to get precise clock.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file COPYING in the main directory of this archive
- * for more details.
- */
-
-/*
- * Miscellaneous atari stuff
- */
-
-#include <linux/types.h>
-#include <linux/mm.h>
-#include <linux/seq_file.h>
-#include <linux/console.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/ioport.h>
-#include <linux/vt_kern.h>
-#include <linux/module.h>
-
-#include <asm/bootinfo.h>
-#include <asm/setup.h>
-#include <asm/atarihw.h>
-#include <asm/atariints.h>
-#include <asm/atari_stram.h>
-#include <asm/machdep.h>
-#include <asm/hwtest.h>
-#include <asm/io.h>
-
-u_long atari_mch_cookie;
-EXPORT_SYMBOL(atari_mch_cookie);
-
-u_long atari_mch_type;
-EXPORT_SYMBOL(atari_mch_type);
-
-struct atari_hw_present atari_hw_present;
-EXPORT_SYMBOL(atari_hw_present);
-
-u_long atari_switches;
-EXPORT_SYMBOL(atari_switches);
-
-int atari_dont_touch_floppy_select;
-EXPORT_SYMBOL(atari_dont_touch_floppy_select);
-
-int atari_rtc_year_offset;
-
-/* local function prototypes */
-static void atari_reset(void);
-static void atari_get_model(char *model);
-static void atari_get_hardware_list(struct seq_file *m);
-
-/* atari specific irq functions */
-extern void atari_init_IRQ (void);
-extern void atari_mksound(unsigned int count, unsigned int ticks);
-#ifdef CONFIG_HEARTBEAT
-static void atari_heartbeat(int on);
-#endif
-
-/* atari specific timer functions (in time.c) */
-extern void atari_sched_init(irq_handler_t);
-extern unsigned long atari_gettimeoffset (void);
-extern int atari_mste_hwclk (int, struct rtc_time *);
-extern int atari_tt_hwclk (int, struct rtc_time *);
-extern int atari_mste_set_clock_mmss (unsigned long);
-extern int atari_tt_set_clock_mmss (unsigned long);
-
-
-/* ++roman: This is a more elaborate test for an SCC chip, since the plain
- * Medusa board generates DTACK at the SCC's standard addresses, but a SCC
- * board in the Medusa is possible. Also, the addresses where the ST_ESCC
- * resides generate DTACK without the chip, too.
- * The method is to write values into the interrupt vector register, that
- * should be readable without trouble (from channel A!).
- */
-
-static int __init scc_test(volatile char *ctla)
-{
-	if (!hwreg_present(ctla))
-		return 0;
-	MFPDELAY();
-
-	*ctla = 2;
-	MFPDELAY();
-	*ctla = 0x40;
-	MFPDELAY();
-
-	*ctla = 2;
-	MFPDELAY();
-	if (*ctla != 0x40)
-		return 0;
-	MFPDELAY();
-
-	*ctla = 2;
-	MFPDELAY();
-	*ctla = 0x60;
-	MFPDELAY();
-
-	*ctla = 2;
-	MFPDELAY();
-	if (*ctla != 0x60)
-		return 0;
-
-	return 1;
-}
-
-
-    /*
-     *  Parse an Atari-specific record in the bootinfo
-     */
-
-int __init atari_parse_bootinfo(const struct bi_record *record)
-{
-	int unknown = 0;
-	const u_long *data = record->data;
-
-	switch (record->tag) {
-	case BI_ATARI_MCH_COOKIE:
-		atari_mch_cookie = *data;
-		break;
-	case BI_ATARI_MCH_TYPE:
-		atari_mch_type = *data;
-		break;
-	default:
-		unknown = 1;
-		break;
-	}
-	return unknown;
-}
-
-
-/* Parse the Atari-specific switches= option. */
-static int __init atari_switches_setup(char *str)
-{
-	char switches[strlen(str) + 1];
-	char *p;
-	int ovsc_shift;
-	char *args = switches;
-
-	if (!MACH_IS_ATARI)
-		return 0;
-
-	/* copy string to local array, strsep works destructively... */
-	strcpy(switches, str);
-	atari_switches = 0;
-
-	/* parse the options */
-	while ((p = strsep(&args, ",")) != NULL) {
-		if (!*p)
-			continue;
-		ovsc_shift = 0;
-		if (strncmp(p, "ov_", 3) == 0) {
-			p += 3;
-			ovsc_shift = ATARI_SWITCH_OVSC_SHIFT;
-		}
-
-		if (strcmp(p, "ikbd") == 0) {
-			/* RTS line of IKBD ACIA */
-			atari_switches |= ATARI_SWITCH_IKBD << ovsc_shift;
-		} else if (strcmp(p, "midi") == 0) {
-			/* RTS line of MIDI ACIA */
-			atari_switches |= ATARI_SWITCH_MIDI << ovsc_shift;
-		} else if (strcmp(p, "snd6") == 0) {
-			atari_switches |= ATARI_SWITCH_SND6 << ovsc_shift;
-		} else if (strcmp(p, "snd7") == 0) {
-			atari_switches |= ATARI_SWITCH_SND7 << ovsc_shift;
-		}
-	}
-	return 0;
-}
-
-early_param("switches", atari_switches_setup);
-
-
-    /*
-     *  Setup the Atari configuration info
-     */
-
-void __init config_atari(void)
-{
-	unsigned short tos_version;
-
-	memset(&atari_hw_present, 0, sizeof(atari_hw_present));
-
-	/* Change size of I/O space from 64KB to 4GB. */
-	ioport_resource.end  = 0xFFFFFFFF;
-
-	mach_sched_init      = atari_sched_init;
-	mach_init_IRQ        = atari_init_IRQ;
-	mach_get_model	 = atari_get_model;
-	mach_get_hardware_list = atari_get_hardware_list;
-	mach_gettimeoffset   = atari_gettimeoffset;
-	mach_reset           = atari_reset;
-	mach_max_dma_address = 0xffffff;
-#if defined(CONFIG_INPUT_M68K_BEEP) || defined(CONFIG_INPUT_M68K_BEEP_MODULE)
-	mach_beep          = atari_mksound;
-#endif
-#ifdef CONFIG_HEARTBEAT
-	mach_heartbeat = atari_heartbeat;
-#endif
-
-	/* Set switches as requested by the user */
-	if (atari_switches & ATARI_SWITCH_IKBD)
-		acia.key_ctrl = ACIA_DIV64 | ACIA_D8N1S | ACIA_RHTID;
-	if (atari_switches & ATARI_SWITCH_MIDI)
-		acia.mid_ctrl = ACIA_DIV16 | ACIA_D8N1S | ACIA_RHTID;
-	if (atari_switches & (ATARI_SWITCH_SND6|ATARI_SWITCH_SND7)) {
-		sound_ym.rd_data_reg_sel = 14;
-		sound_ym.wd_data = sound_ym.rd_data_reg_sel |
-				   ((atari_switches&ATARI_SWITCH_SND6) ? 0x40 : 0) |
-				   ((atari_switches&ATARI_SWITCH_SND7) ? 0x80 : 0);
-	}
-
-	/* ++bjoern:
-	 * Determine hardware present
-	 */
-
-	printk("Atari hardware found: ");
-	if (MACH_IS_MEDUSA) {
-		/* There's no Atari video hardware on the Medusa, but all the
-		 * addresses below generate a DTACK so no bus error occurs! */
-	} else if (hwreg_present(f030_xreg)) {
-		ATARIHW_SET(VIDEL_SHIFTER);
-		printk("VIDEL ");
-		/* This is a temporary hack: If there is Falcon video
-		 * hardware, we assume that the ST-DMA serves SCSI instead of
-		 * ACSI. In the future, there should be a better method for
-		 * this...
-		 */
-		ATARIHW_SET(ST_SCSI);
-		printk("STDMA-SCSI ");
-	} else if (hwreg_present(tt_palette)) {
-		ATARIHW_SET(TT_SHIFTER);
-		printk("TT_SHIFTER ");
-	} else if (hwreg_present(&shifter.bas_hi)) {
-		if (hwreg_present(&shifter.bas_lo) &&
-		    (shifter.bas_lo = 0x0aau, shifter.bas_lo == 0x0aau)) {
-			ATARIHW_SET(EXTD_SHIFTER);
-			printk("EXTD_SHIFTER ");
-		} else {
-			ATARIHW_SET(STND_SHIFTER);
-			printk("STND_SHIFTER ");
-		}
-	}
-	if (hwreg_present(&st_mfp.par_dt_reg)) {
-		ATARIHW_SET(ST_MFP);
-		printk("ST_MFP ");
-	}
-	if (hwreg_present(&tt_mfp.par_dt_reg)) {
-		ATARIHW_SET(TT_MFP);
-		printk("TT_MFP ");
-	}
-	if (hwreg_present(&tt_scsi_dma.dma_addr_hi)) {
-		ATARIHW_SET(SCSI_DMA);
-		printk("TT_SCSI_DMA ");
-	}
-	/*
-	 * The ST-DMA address registers aren't readable
-	 * on all Medusas, so the test below may fail
-	 */
-	if (MACH_IS_MEDUSA ||
-	    (hwreg_present(&st_dma.dma_vhi) &&
-	     (st_dma.dma_vhi = 0x55) && (st_dma.dma_hi = 0xaa) &&
-	     st_dma.dma_vhi == 0x55 && st_dma.dma_hi == 0xaa &&
-	     (st_dma.dma_vhi = 0xaa) && (st_dma.dma_hi = 0x55) &&
-	     st_dma.dma_vhi == 0xaa && st_dma.dma_hi == 0x55)) {
-		ATARIHW_SET(EXTD_DMA);
-		printk("EXTD_DMA ");
-	}
-	if (hwreg_present(&tt_scsi.scsi_data)) {
-		ATARIHW_SET(TT_SCSI);
-		printk("TT_SCSI ");
-	}
-	if (hwreg_present(&sound_ym.rd_data_reg_sel)) {
-		ATARIHW_SET(YM_2149);
-		printk("YM2149 ");
-	}
-	if (!MACH_IS_MEDUSA && hwreg_present(&tt_dmasnd.ctrl)) {
-		ATARIHW_SET(PCM_8BIT);
-		printk("PCM ");
-	}
-	if (hwreg_present(&falcon_codec.unused5)) {
-		ATARIHW_SET(CODEC);
-		printk("CODEC ");
-	}
-	if (hwreg_present(&dsp56k_host_interface.icr)) {
-		ATARIHW_SET(DSP56K);
-		printk("DSP56K ");
-	}
-	if (hwreg_present(&tt_scc_dma.dma_ctrl) &&
-#if 0
-	    /* This test sucks! Who knows some better? */
-	    (tt_scc_dma.dma_ctrl = 0x01, (tt_scc_dma.dma_ctrl & 1) == 1) &&
-	    (tt_scc_dma.dma_ctrl = 0x00, (tt_scc_dma.dma_ctrl & 1) == 0)
-#else
-	    !MACH_IS_MEDUSA
-#endif
-	    ) {
-		ATARIHW_SET(SCC_DMA);
-		printk("SCC_DMA ");
-	}
-	if (scc_test(&atari_scc.cha_a_ctrl)) {
-		ATARIHW_SET(SCC);
-		printk("SCC ");
-	}
-	if (scc_test(&st_escc.cha_b_ctrl)) {
-		ATARIHW_SET(ST_ESCC);
-		printk("ST_ESCC ");
-	}
-	if (hwreg_present(&tt_scu.sys_mask)) {
-		ATARIHW_SET(SCU);
-		/* Assume a VME bus if there's a SCU */
-		ATARIHW_SET(VME);
-		printk("VME SCU ");
-	}
-	if (hwreg_present((void *)(0xffff9210))) {
-		ATARIHW_SET(ANALOG_JOY);
-		printk("ANALOG_JOY ");
-	}
-	if (hwreg_present(blitter.halftone)) {
-		ATARIHW_SET(BLITTER);
-		printk("BLITTER ");
-	}
-	if (hwreg_present((void *)0xfff00039)) {
-		ATARIHW_SET(IDE);
-		printk("IDE ");
-	}
-#if 1 /* This maybe wrong */
-	if (!MACH_IS_MEDUSA && hwreg_present(&tt_microwire.data) &&
-	    hwreg_present(&tt_microwire.mask) &&
-	    (tt_microwire.mask = 0x7ff,
-	     udelay(1),
-	     tt_microwire.data = MW_LM1992_PSG_HIGH | MW_LM1992_ADDR,
-	     udelay(1),
-	     tt_microwire.data != 0)) {
-		ATARIHW_SET(MICROWIRE);
-		while (tt_microwire.mask != 0x7ff)
-			;
-		printk("MICROWIRE ");
-	}
-#endif
-	if (hwreg_present(&tt_rtc.regsel)) {
-		ATARIHW_SET(TT_CLK);
-		printk("TT_CLK ");
-		mach_hwclk = atari_tt_hwclk;
-		mach_set_clock_mmss = atari_tt_set_clock_mmss;
-	}
-	if (hwreg_present(&mste_rtc.sec_ones)) {
-		ATARIHW_SET(MSTE_CLK);
-		printk("MSTE_CLK ");
-		mach_hwclk = atari_mste_hwclk;
-		mach_set_clock_mmss = atari_mste_set_clock_mmss;
-	}
-	if (!MACH_IS_MEDUSA && hwreg_present(&dma_wd.fdc_speed) &&
-	    hwreg_write(&dma_wd.fdc_speed, 0)) {
-		ATARIHW_SET(FDCSPEED);
-		printk("FDC_SPEED ");
-	}
-	if (!ATARIHW_PRESENT(ST_SCSI)) {
-		ATARIHW_SET(ACSI);
-		printk("ACSI ");
-	}
-	printk("\n");
-
-	if (CPU_IS_040_OR_060)
-		/* Now it seems to be safe to turn of the tt0 transparent
-		 * translation (the one that must not be turned off in
-		 * head.S...)
-		 */
-		asm volatile ("\n"
-			"	moveq	#0,%%d0\n"
-			"	.chip	68040\n"
-			"	movec	%%d0,%%itt0\n"
-			"	movec	%%d0,%%dtt0\n"
-			"	.chip	68k"
-			: /* no outputs */
-			: /* no inputs */
-			: "d0");
-
-	/* allocator for memory that must reside in st-ram */
-	atari_stram_init();
-
-	/* Set up a mapping for the VMEbus address region:
-	 *
-	 * VME is either at phys. 0xfexxxxxx (TT) or 0xa00000..0xdfffff
-	 * (MegaSTE) In both cases, the whole 16 MB chunk is mapped at
-	 * 0xfe000000 virt., because this can be done with a single
-	 * transparent translation. On the 68040, lots of often unused
-	 * page tables would be needed otherwise. On a MegaSTE or similar,
-	 * the highest byte is stripped off by hardware due to the 24 bit
-	 * design of the bus.
-	 */
-
-	if (CPU_IS_020_OR_030) {
-		unsigned long tt1_val;
-		tt1_val = 0xfe008543;	/* Translate 0xfexxxxxx, enable, cache
-					 * inhibit, read and write, FDC mask = 3,
-					 * FDC val = 4 -> Supervisor only */
-		asm volatile ("\n"
-			"	.chip	68030\n"
-			"	pmove	%0,%/tt1\n"
-			"	.chip	68k"
-			: : "m" (tt1_val));
-	} else {
-	        asm volatile ("\n"
-			"	.chip	68040\n"
-			"	movec	%0,%%itt1\n"
-			"	movec	%0,%%dtt1\n"
-			"	.chip	68k"
-			:
-			: "d" (0xfe00a040));	/* Translate 0xfexxxxxx, enable,
-						 * supervisor only, non-cacheable/
-						 * serialized, writable */
-
-	}
-
-	/* Fetch tos version at Physical 2 */
-	/*
-	 * We my not be able to access this address if the kernel is
-	 * loaded to st ram, since the first page is unmapped.  On the
-	 * Medusa this is always the case and there is nothing we can do
-	 * about this, so we just assume the smaller offset.  For the TT
-	 * we use the fact that in head.S we have set up a mapping
-	 * 0xFFxxxxxx -> 0x00xxxxxx, so that the first 16MB is accessible
-	 * in the last 16MB of the address space.
-	 */
-	tos_version = (MACH_IS_MEDUSA) ?
-			0xfff : *(unsigned short *)0xff000002;
-	atari_rtc_year_offset = (tos_version < 0x306) ? 70 : 68;
-}
-
-#ifdef CONFIG_HEARTBEAT
-static void atari_heartbeat(int on)
-{
-	unsigned char tmp;
-	unsigned long flags;
-
-	if (atari_dont_touch_floppy_select)
-		return;
-
-	local_irq_save(flags);
-	sound_ym.rd_data_reg_sel = 14;	/* Select PSG Port A */
-	tmp = sound_ym.rd_data_reg_sel;
-	sound_ym.wd_data = on ? (tmp & ~0x02) : (tmp | 0x02);
-	local_irq_restore(flags);
-}
-#endif
-
-/* ++roman:
- *
- * This function does a reset on machines that lack the ability to
- * assert the processor's _RESET signal somehow via hardware. It is
- * based on the fact that you can find the initial SP and PC values
- * after a reset at physical addresses 0 and 4. This works pretty well
- * for Atari machines, since the lowest 8 bytes of physical memory are
- * really ROM (mapped by hardware). For other 680x0 machines: don't
- * know if it works...
- *
- * To get the values at addresses 0 and 4, the MMU better is turned
- * off first. After that, we have to jump into physical address space
- * (the PC before the pmove statement points to the virtual address of
- * the code). Getting that physical address is not hard, but the code
- * becomes a bit complex since I've tried to ensure that the jump
- * statement after the pmove is in the cache already (otherwise the
- * processor can't fetch it!). For that, the code first jumps to the
- * jump statement with the (virtual) address of the pmove section in
- * an address register . The jump statement is surely in the cache
- * now. After that, that physical address of the reset code is loaded
- * into the same address register, pmove is done and the same jump
- * statements goes to the reset code. Since there are not many
- * statements between the two jumps, I hope it stays in the cache.
- *
- * The C code makes heavy use of the GCC features that you can get the
- * address of a C label. No hope to compile this with another compiler
- * than GCC!
- */
-
-/* ++andreas: no need for complicated code, just depend on prefetch */
-
-static void atari_reset(void)
-{
-	long tc_val = 0;
-	long reset_addr;
-
-	/*
-	 * On the Medusa, phys. 0x4 may contain garbage because it's no
-	 * ROM.  See above for explanation why we cannot use PTOV(4).
-	 */
-	reset_addr = MACH_IS_MEDUSA || MACH_IS_AB40 ? 0xe00030 :
-		     *(unsigned long *) 0xff000004;
-
-	/* reset ACIA for switch off OverScan, if it's active */
-	if (atari_switches & ATARI_SWITCH_OVSC_IKBD)
-		acia.key_ctrl = ACIA_RESET;
-	if (atari_switches & ATARI_SWITCH_OVSC_MIDI)
-		acia.mid_ctrl = ACIA_RESET;
-
-	/* processor independent: turn off interrupts and reset the VBR;
-	 * the caches must be left enabled, else prefetching the final jump
-	 * instruction doesn't work.
-	 */
-	local_irq_disable();
-	asm volatile ("movec	%0,%%vbr"
-			: : "d" (0));
-
-	if (CPU_IS_040_OR_060) {
-		unsigned long jmp_addr040 = virt_to_phys(&&jmp_addr_label040);
-		if (CPU_IS_060) {
-			/* 68060: clear PCR to turn off superscalar operation */
-			asm volatile ("\n"
-				"	.chip 68060\n"
-				"	movec %0,%%pcr\n"
-				"	.chip 68k"
-				: : "d" (0));
-		}
-
-		asm volatile ("\n"
-			"	move.l	%0,%%d0\n"
-			"	and.l	#0xff000000,%%d0\n"
-			"	or.w	#0xe020,%%d0\n"   /* map 16 MB, enable, cacheable */
-			"	.chip	68040\n"
-			"	movec	%%d0,%%itt0\n"
-			"	movec	%%d0,%%dtt0\n"
-			"	.chip	68k\n"
-			"	jmp	%0@"
-			: : "a" (jmp_addr040)
-			: "d0");
-	jmp_addr_label040:
-		asm volatile ("\n"
-			"	moveq	#0,%%d0\n"
-			"	nop\n"
-			"	.chip	68040\n"
-			"	cinva	%%bc\n"
-			"	nop\n"
-			"	pflusha\n"
-			"	nop\n"
-			"	movec	%%d0,%%tc\n"
-			"	nop\n"
-			/* the following setup of transparent translations is needed on the
-			 * Afterburner040 to successfully reboot. Other machines shouldn't
-			 * care about a different tt regs setup, they also didn't care in
-			 * the past that the regs weren't turned off. */
-			"	move.l	#0xffc000,%%d0\n" /* whole insn space cacheable */
-			"	movec	%%d0,%%itt0\n"
-			"	movec	%%d0,%%itt1\n"
-			"	or.w	#0x40,%/d0\n" /* whole data space non-cacheable/ser. */
-			"	movec	%%d0,%%dtt0\n"
-			"	movec	%%d0,%%dtt1\n"
-			"	.chip	68k\n"
-			"	jmp	%0@"
-			: /* no outputs */
-			: "a" (reset_addr)
-			: "d0");
-	} else
-		asm volatile ("\n"
-			"	pmove	%0,%%tc\n"
-			"	jmp	%1@"
-			: /* no outputs */
-			: "m" (tc_val), "a" (reset_addr));
-}
-
-
-static void atari_get_model(char *model)
-{
-	strcpy(model, "Atari ");
-	switch (atari_mch_cookie >> 16) {
-	case ATARI_MCH_ST:
-		if (ATARIHW_PRESENT(MSTE_CLK))
-			strcat(model, "Mega ST");
-		else
-			strcat(model, "ST");
-		break;
-	case ATARI_MCH_STE:
-		if (MACH_IS_MSTE)
-			strcat(model, "Mega STE");
-		else
-			strcat(model, "STE");
-		break;
-	case ATARI_MCH_TT:
-		if (MACH_IS_MEDUSA)
-			/* Medusa has TT _MCH cookie */
-			strcat(model, "Medusa");
-		else
-			strcat(model, "TT");
-		break;
-	case ATARI_MCH_FALCON:
-		strcat(model, "Falcon");
-		if (MACH_IS_AB40)
-			strcat(model, " (with Afterburner040)");
-		break;
-	default:
-		sprintf(model + strlen(model), "(unknown mach cookie 0x%lx)",
-			atari_mch_cookie);
-		break;
-	}
-}
-
-
-static void atari_get_hardware_list(struct seq_file *m)
-{
-	int i;
-
-	for (i = 0; i < m68k_num_memory; i++)
-		seq_printf(m, "\t%3ld MB at 0x%08lx (%s)\n",
-				m68k_memory[i].size >> 20, m68k_memory[i].addr,
-				(m68k_memory[i].addr & 0xff000000 ?
-				 "alternate RAM" : "ST-RAM"));
-
-#define ATARIHW_ANNOUNCE(name, str)			\
-	if (ATARIHW_PRESENT(name))			\
-		seq_printf(m, "\t%s\n", str)
-
-	seq_printf(m, "Detected hardware:\n");
-	ATARIHW_ANNOUNCE(STND_SHIFTER, "ST Shifter");
-	ATARIHW_ANNOUNCE(EXTD_SHIFTER, "STe Shifter");
-	ATARIHW_ANNOUNCE(TT_SHIFTER, "TT Shifter");
-	ATARIHW_ANNOUNCE(VIDEL_SHIFTER, "Falcon Shifter");
-	ATARIHW_ANNOUNCE(YM_2149, "Programmable Sound Generator");
-	ATARIHW_ANNOUNCE(PCM_8BIT, "PCM 8 Bit Sound");
-	ATARIHW_ANNOUNCE(CODEC, "CODEC Sound");
-	ATARIHW_ANNOUNCE(TT_SCSI, "SCSI Controller NCR5380 (TT style)");
-	ATARIHW_ANNOUNCE(ST_SCSI, "SCSI Controller NCR5380 (Falcon style)");
-	ATARIHW_ANNOUNCE(ACSI, "ACSI Interface");
-	ATARIHW_ANNOUNCE(IDE, "IDE Interface");
-	ATARIHW_ANNOUNCE(FDCSPEED, "8/16 Mhz Switch for FDC");
-	ATARIHW_ANNOUNCE(ST_MFP, "Multi Function Peripheral MFP 68901");
-	ATARIHW_ANNOUNCE(TT_MFP, "Second Multi Function Peripheral MFP 68901");
-	ATARIHW_ANNOUNCE(SCC, "Serial Communications Controller SCC 8530");
-	ATARIHW_ANNOUNCE(ST_ESCC, "Extended Serial Communications Controller SCC 85230");
-	ATARIHW_ANNOUNCE(ANALOG_JOY, "Paddle Interface");
-	ATARIHW_ANNOUNCE(MICROWIRE, "MICROWIRE(tm) Interface");
-	ATARIHW_ANNOUNCE(STND_DMA, "DMA Controller (24 bit)");
-	ATARIHW_ANNOUNCE(EXTD_DMA, "DMA Controller (32 bit)");
-	ATARIHW_ANNOUNCE(SCSI_DMA, "DMA Controller for NCR5380");
-	ATARIHW_ANNOUNCE(SCC_DMA, "DMA Controller for SCC");
-	ATARIHW_ANNOUNCE(TT_CLK, "Clock Chip MC146818A");
-	ATARIHW_ANNOUNCE(MSTE_CLK, "Clock Chip RP5C15");
-	ATARIHW_ANNOUNCE(SCU, "System Control Unit");
-	ATARIHW_ANNOUNCE(BLITTER, "Blitter");
-	ATARIHW_ANNOUNCE(VME, "VME Bus");
-	ATARIHW_ANNOUNCE(DSP56K, "DSP56001 processor");
-}
diff --git a/ANDROID_3.4.5/arch/m68k/atari/debug.c b/ANDROID_3.4.5/arch/m68k/atari/debug.c
deleted file mode 100644
index a547ba96..00000000
--- a/ANDROID_3.4.5/arch/m68k/atari/debug.c
+++ /dev/null
@@ -1,326 +0,0 @@
-/*
- * linux/arch/m68k/atari/debug.c
- *
- * Atari debugging and serial console stuff
- *
- * Assembled of parts of former atari/config.c 97-12-18 by Roman Hodek
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file COPYING in the main directory of this archive
- * for more details.
- */
-
-#include <linux/types.h>
-#include <linux/tty.h>
-#include <linux/console.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/module.h>
-
-#include <asm/atarihw.h>
-#include <asm/atariints.h>
-
-/* Can be set somewhere, if a SCC master reset has already be done and should
- * not be repeated; used by kgdb */
-int atari_SCC_reset_done;
-EXPORT_SYMBOL(atari_SCC_reset_done);
-
-static struct console atari_console_driver = {
-	.name	= "debug",
-	.flags	= CON_PRINTBUFFER,
-	.index	= -1,
-};
-
-
-static inline void ata_mfp_out(char c)
-{
-	while (!(st_mfp.trn_stat & 0x80))	/* wait for tx buf empty */
-		barrier();
-	st_mfp.usart_dta = c;
-}
-
-static void atari_mfp_console_write(struct console *co, const char *str,
-				    unsigned int count)
-{
-	while (count--) {
-		if (*str == '\n')
-			ata_mfp_out('\r');
-		ata_mfp_out(*str++);
-	}
-}
-
-static inline void ata_scc_out(char c)
-{
-	do {
-		MFPDELAY();
-	} while (!(atari_scc.cha_b_ctrl & 0x04)); /* wait for tx buf empty */
-	MFPDELAY();
-	atari_scc.cha_b_data = c;
-}
-
-static void atari_scc_console_write(struct console *co, const char *str,
-				    unsigned int count)
-{
-	while (count--) {
-		if (*str == '\n')
-			ata_scc_out('\r');
-		ata_scc_out(*str++);
-	}
-}
-
-static inline void ata_midi_out(char c)
-{
-	while (!(acia.mid_ctrl & ACIA_TDRE))	/* wait for tx buf empty */
-		barrier();
-	acia.mid_data = c;
-}
-
-static void atari_midi_console_write(struct console *co, const char *str,
-				     unsigned int count)
-{
-	while (count--) {
-		if (*str == '\n')
-			ata_midi_out('\r');
-		ata_midi_out(*str++);
-	}
-}
-
-static int ata_par_out(char c)
-{
-	unsigned char tmp;
-	/* This a some-seconds timeout in case no printer is connected */
-	unsigned long i = loops_per_jiffy > 1 ? loops_per_jiffy : 10000000/HZ;
-
-	while ((st_mfp.par_dt_reg & 1) && --i) /* wait for BUSY == L */
-		;
-	if (!i)
-		return 0;
-
-	sound_ym.rd_data_reg_sel = 15;	/* select port B */
-	sound_ym.wd_data = c;		/* put char onto port */
-	sound_ym.rd_data_reg_sel = 14;	/* select port A */
-	tmp = sound_ym.rd_data_reg_sel;
-	sound_ym.wd_data = tmp & ~0x20;	/* set strobe L */
-	MFPDELAY();			/* wait a bit */
-	sound_ym.wd_data = tmp | 0x20;	/* set strobe H */
-	return 1;
-}
-
-static void atari_par_console_write(struct console *co, const char *str,
-				    unsigned int count)
-{
-	static int printer_present = 1;
-
-	if (!printer_present)
-		return;
-
-	while (count--) {
-		if (*str == '\n') {
-			if (!ata_par_out('\r')) {
-				printer_present = 0;
-				return;
-			}
-		}
-		if (!ata_par_out(*str++)) {
-			printer_present = 0;
-			return;
-		}
-	}
-}
-
-#if 0
-int atari_mfp_console_wait_key(struct console *co)
-{
-	while (!(st_mfp.rcv_stat & 0x80))	/* wait for rx buf filled */
-		barrier();
-	return st_mfp.usart_dta;
-}
-
-int atari_scc_console_wait_key(struct console *co)
-{
-	do {
-		MFPDELAY();
-	} while (!(atari_scc.cha_b_ctrl & 0x01)); /* wait for rx buf filled */
-	MFPDELAY();
-	return atari_scc.cha_b_data;
-}
-
-int atari_midi_console_wait_key(struct console *co)
-{
-	while (!(acia.mid_ctrl & ACIA_RDRF)) /* wait for rx buf filled */
-		barrier();
-	return acia.mid_data;
-}
-#endif
-
-/*
- * The following two functions do a quick'n'dirty initialization of the MFP or
- * SCC serial ports. They're used by the debugging interface, kgdb, and the
- * serial console code.
- */
-static void __init atari_init_mfp_port(int cflag)
-{
-	/*
-	 * timer values for 1200...115200 bps; > 38400 select 110, 134, or 150
-	 * bps, resp., and work only correct if there's a RSVE or RSSPEED
-	 */
-	static int baud_table[9] = { 16, 11, 8, 4, 2, 1, 175, 143, 128 };
-	int baud = cflag & CBAUD;
-	int parity = (cflag & PARENB) ? ((cflag & PARODD) ? 0x04 : 0x06) : 0;
-	int csize = ((cflag & CSIZE) == CS7) ? 0x20 : 0x00;
-
-	if (cflag & CBAUDEX)
-		baud += B38400;
-	if (baud < B1200 || baud > B38400+2)
-		baud = B9600;		/* use default 9600bps for non-implemented rates */
-	baud -= B1200;			/* baud_table[] starts at 1200bps */
-
-	st_mfp.trn_stat &= ~0x01;	/* disable TX */
-	st_mfp.usart_ctr = parity | csize | 0x88; /* 1:16 clk mode, 1 stop bit */
-	st_mfp.tim_ct_cd &= 0x70;	/* stop timer D */
-	st_mfp.tim_dt_d = baud_table[baud];
-	st_mfp.tim_ct_cd |= 0x01;	/* start timer D, 1:4 */
-	st_mfp.trn_stat |= 0x01;	/* enable TX */
-}
-
-#define SCC_WRITE(reg, val)				\
-	do {						\
-		atari_scc.cha_b_ctrl = (reg);		\
-		MFPDELAY();				\
-		atari_scc.cha_b_ctrl = (val);		\
-		MFPDELAY();				\
-	} while (0)
-
-/* loops_per_jiffy isn't initialized yet, so we can't use udelay(). This does a
- * delay of ~ 60us. */
-#define LONG_DELAY()					\
-	do {						\
-		int i;					\
-		for (i = 100; i > 0; --i)		\
-			MFPDELAY();			\
-	} while (0)
-
-static void __init atari_init_scc_port(int cflag)
-{
-	static int clksrc_table[9] =
-		/* reg 11: 0x50 = BRG, 0x00 = RTxC, 0x28 = TRxC */
-		{ 0x50, 0x50, 0x50, 0x50, 0x50, 0x50, 0x50, 0x00, 0x00 };
-	static int brgsrc_table[9] =
-		/* reg 14: 0 = RTxC, 2 = PCLK */
-		{ 2, 2, 2, 2, 2, 2, 0, 2, 2 };
-	static int clkmode_table[9] =
-		/* reg 4: 0x40 = x16, 0x80 = x32, 0xc0 = x64 */
-		{ 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0xc0, 0x80 };
-	static int div_table[9] =
-		/* reg12 (BRG low) */
-		{ 208, 138, 103, 50, 24, 11, 1, 0, 0 };
-
-	int baud = cflag & CBAUD;
-	int clksrc, clkmode, div, reg3, reg5;
-
-	if (cflag & CBAUDEX)
-		baud += B38400;
-	if (baud < B1200 || baud > B38400+2)
-		baud = B9600;		/* use default 9600bps for non-implemented rates */
-	baud -= B1200;			/* tables starts at 1200bps */
-
-	clksrc  = clksrc_table[baud];
-	clkmode = clkmode_table[baud];
-	div     = div_table[baud];
-	if (ATARIHW_PRESENT(TT_MFP) && baud >= 6) {
-		/* special treatment for TT, where rates >= 38400 are done via TRxC */
-		clksrc = 0x28;		/* TRxC */
-		clkmode = baud == 6 ? 0xc0 :
-			  baud == 7 ? 0x80 : /* really 76800bps */
-				      0x40;  /* really 153600bps */
-		div = 0;
-	}
-
-	reg3 = (cflag & CSIZE) == CS8 ? 0xc0 : 0x40;
-	reg5 = (cflag & CSIZE) == CS8 ? 0x60 : 0x20 | 0x82 /* assert DTR/RTS */;
-
-	(void)atari_scc.cha_b_ctrl;	/* reset reg pointer */
-	SCC_WRITE(9, 0xc0);		/* reset */
-	LONG_DELAY();			/* extra delay after WR9 access */
-	SCC_WRITE(4, (cflag & PARENB) ? ((cflag & PARODD) ? 0x01 : 0x03)
-				      : 0 | 0x04 /* 1 stopbit */ | clkmode);
-	SCC_WRITE(3, reg3);
-	SCC_WRITE(5, reg5);
-	SCC_WRITE(9, 0);		/* no interrupts */
-	LONG_DELAY();			/* extra delay after WR9 access */
-	SCC_WRITE(10, 0);		/* NRZ mode */
-	SCC_WRITE(11, clksrc);		/* main clock source */
-	SCC_WRITE(12, div);		/* BRG value */
-	SCC_WRITE(13, 0);		/* BRG high byte */
-	SCC_WRITE(14, brgsrc_table[baud]);
-	SCC_WRITE(14, brgsrc_table[baud] | (div ? 1 : 0));
-	SCC_WRITE(3, reg3 | 1);
-	SCC_WRITE(5, reg5 | 8);
-
-	atari_SCC_reset_done = 1;
-}
-
-static void __init atari_init_midi_port(int cflag)
-{
-	int baud = cflag & CBAUD;
-	int csize = ((cflag & CSIZE) == CS8) ? 0x10 : 0x00;
-	/* warning 7N1 isn't possible! (instead 7O2 is used...) */
-	int parity = (cflag & PARENB) ? ((cflag & PARODD) ? 0x0c : 0x08) : 0x04;
-	int div;
-
-	/* 4800 selects 7812.5, 115200 selects 500000, all other (incl. 9600 as
-	 * default) the standard MIDI speed 31250. */
-	if (cflag & CBAUDEX)
-		baud += B38400;
-	if (baud == B4800)
-		div = ACIA_DIV64;	/* really 7812.5 bps */
-	else if (baud == B38400+2 /* 115200 */)
-		div = ACIA_DIV1;	/* really 500 kbps (does that work??) */
-	else
-		div = ACIA_DIV16;	/* 31250 bps, standard for MIDI */
-
-	/* RTS low, ints disabled */
-	acia.mid_ctrl = div | csize | parity |
-		    ((atari_switches & ATARI_SWITCH_MIDI) ?
-		     ACIA_RHTID : ACIA_RLTID);
-}
-
-static int __init atari_debug_setup(char *arg)
-{
-	if (!MACH_IS_ATARI)
-		return 0;
-
-	if (!strcmp(arg, "ser"))
-		/* defaults to ser2 for a Falcon and ser1 otherwise */
-		arg = MACH_IS_FALCON ? "ser2" : "ser1";
-
-	if (!strcmp(arg, "ser1")) {
-		/* ST-MFP Modem1 serial port */
-		atari_init_mfp_port(B9600|CS8);
-		atari_console_driver.write = atari_mfp_console_write;
-	} else if (!strcmp(arg, "ser2")) {
-		/* SCC Modem2 serial port */
-		atari_init_scc_port(B9600|CS8);
-		atari_console_driver.write = atari_scc_console_write;
-	} else if (!strcmp(arg, "midi")) {
-		/* MIDI port */
-		atari_init_midi_port(B9600|CS8);
-		atari_console_driver.write = atari_midi_console_write;
-	} else if (!strcmp(arg, "par")) {
-		/* parallel printer */
-		atari_turnoff_irq(IRQ_MFP_BUSY); /* avoid ints */
-		sound_ym.rd_data_reg_sel = 7;	/* select mixer control */
-		sound_ym.wd_data = 0xff;	/* sound off, ports are output */
-		sound_ym.rd_data_reg_sel = 15;	/* select port B */
-		sound_ym.wd_data = 0;		/* no char */
-		sound_ym.rd_data_reg_sel = 14;	/* select port A */
-		sound_ym.wd_data = sound_ym.rd_data_reg_sel | 0x20; /* strobe H */
-		atari_console_driver.write = atari_par_console_write;
-	}
-	if (atari_console_driver.write)
-		register_console(&atari_console_driver);
-
-	return 0;
-}
-
-early_param("debug", atari_debug_setup);
diff --git a/ANDROID_3.4.5/arch/m68k/atari/stdma.c b/ANDROID_3.4.5/arch/m68k/atari/stdma.c
deleted file mode 100644
index ddbf43ca..00000000
--- a/ANDROID_3.4.5/arch/m68k/atari/stdma.c
+++ /dev/null
@@ -1,201 +0,0 @@
-/*
- *  linux/arch/m68k/atari/stmda.c
- *
- *  Copyright (C) 1994 Roman Hodek
- *
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file COPYING in the main directory of this archive
- * for more details.
- */
-
-
-/* This file contains some function for controlling the access to the  */
-/* ST-DMA chip that may be shared between devices. Currently we have:  */
-/*   TT:     Floppy and ACSI bus                                       */
-/*   Falcon: Floppy and SCSI                                           */
-/*                                                                     */
-/* The controlling functions set up a wait queue for access to the     */
-/* ST-DMA chip. Callers to stdma_lock() that cannot granted access are */
-/* put onto a queue and waked up later if the owner calls              */
-/* stdma_release(). Additionally, the caller gives his interrupt       */
-/* service routine to stdma_lock().                                    */
-/*                                                                     */
-/* On the Falcon, the IDE bus uses just the ACSI/Floppy interrupt, but */
-/* not the ST-DMA chip itself. So falhd.c needs not to lock the        */
-/* chip. The interrupt is routed to falhd.c if IDE is configured, the  */
-/* model is a Falcon and the interrupt was caused by the HD controller */
-/* (can be determined by looking at its status register).              */
-
-
-#include <linux/types.h>
-#include <linux/kdev_t.h>
-#include <linux/genhd.h>
-#include <linux/sched.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/wait.h>
-#include <linux/module.h>
-
-#include <asm/atari_stdma.h>
-#include <asm/atariints.h>
-#include <asm/atarihw.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-
-static int stdma_locked;			/* the semaphore */
-						/* int func to be called */
-static irq_handler_t stdma_isr;
-static void *stdma_isr_data;			/* data passed to isr */
-static DECLARE_WAIT_QUEUE_HEAD(stdma_wait);	/* wait queue for ST-DMA */
-
-
-
-
-/***************************** Prototypes *****************************/
-
-static irqreturn_t stdma_int (int irq, void *dummy);
-
-/************************* End of Prototypes **************************/
-
-
-
-/*
- * Function: void stdma_lock( isrfunc isr, void *data )
- *
- * Purpose: Tries to get a lock on the ST-DMA chip that is used by more
- *   then one device driver. Waits on stdma_wait until lock is free.
- *   stdma_lock() may not be called from an interrupt! You have to
- *   get the lock in your main routine and release it when your
- *   request is finished.
- *
- * Inputs: A interrupt function that is called until the lock is
- *   released.
- *
- * Returns: nothing
- *
- */
-
-void stdma_lock(irq_handler_t handler, void *data)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);		/* protect lock */
-
-	/* Since the DMA is used for file system purposes, we
-	 have to sleep uninterruptible (there may be locked
-	 buffers) */
-	wait_event(stdma_wait, !stdma_locked);
-
-	stdma_locked   = 1;
-	stdma_isr      = handler;
-	stdma_isr_data = data;
-	local_irq_restore(flags);
-}
-EXPORT_SYMBOL(stdma_lock);
-
-
-/*
- * Function: void stdma_release( void )
- *
- * Purpose: Releases the lock on the ST-DMA chip.
- *
- * Inputs: none
- *
- * Returns: nothing
- *
- */
-
-void stdma_release(void)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-
-	stdma_locked   = 0;
-	stdma_isr      = NULL;
-	stdma_isr_data = NULL;
-	wake_up(&stdma_wait);
-
-	local_irq_restore(flags);
-}
-EXPORT_SYMBOL(stdma_release);
-
-
-/*
- * Function: int stdma_others_waiting( void )
- *
- * Purpose: Check if someone waits for the ST-DMA lock.
- *
- * Inputs: none
- *
- * Returns: 0 if no one is waiting, != 0 otherwise
- *
- */
-
-int stdma_others_waiting(void)
-{
-	return waitqueue_active(&stdma_wait);
-}
-EXPORT_SYMBOL(stdma_others_waiting);
-
-
-/*
- * Function: int stdma_islocked( void )
- *
- * Purpose: Check if the ST-DMA is currently locked.
- * Note: Returned status is only valid if ints are disabled while calling and
- *       as long as they remain disabled.
- *       If called with ints enabled, status can change only from locked to
- *       unlocked, because ints may not lock the ST-DMA.
- *
- * Inputs: none
- *
- * Returns: != 0 if locked, 0 otherwise
- *
- */
-
-int stdma_islocked(void)
-{
-	return stdma_locked;
-}
-EXPORT_SYMBOL(stdma_islocked);
-
-
-/*
- * Function: void stdma_init( void )
- *
- * Purpose: Initialize the ST-DMA chip access controlling.
- *   It sets up the interrupt and its service routine. The int is registered
- *   as slow int, client devices have to live with that (no problem
- *   currently).
- *
- * Inputs: none
- *
- * Return: nothing
- *
- */
-
-void __init stdma_init(void)
-{
-	stdma_isr = NULL;
-	if (request_irq(IRQ_MFP_FDC, stdma_int, IRQ_TYPE_SLOW | IRQF_SHARED,
-			"ST-DMA floppy,ACSI,IDE,Falcon-SCSI", stdma_int))
-		pr_err("Couldn't register ST-DMA interrupt\n");
-}
-
-
-/*
- * Function: void stdma_int()
- *
- * Purpose: The interrupt routine for the ST-DMA. It calls the isr
- *   registered by stdma_lock().
- *
- */
-
-static irqreturn_t stdma_int(int irq, void *dummy)
-{
-  if (stdma_isr)
-      (*stdma_isr)(irq, stdma_isr_data);
-  return IRQ_HANDLED;
-}
diff --git a/ANDROID_3.4.5/arch/m68k/atari/stram.c b/ANDROID_3.4.5/arch/m68k/atari/stram.c
deleted file mode 100644
index 0810c8d5..00000000
--- a/ANDROID_3.4.5/arch/m68k/atari/stram.c
+++ /dev/null
@@ -1,160 +0,0 @@
-/*
- * Functions for ST-RAM allocations
- *
- * Copyright 1994-97 Roman Hodek <Roman.Hodek@informatik.uni-erlangen.de>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file COPYING in the main directory of this archive
- * for more details.
- */
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/kdev_t.h>
-#include <linux/major.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/vmalloc.h>
-#include <linux/pagemap.h>
-#include <linux/bootmem.h>
-#include <linux/mount.h>
-#include <linux/blkdev.h>
-#include <linux/module.h>
-
-#include <asm/setup.h>
-#include <asm/machdep.h>
-#include <asm/page.h>
-#include <asm/pgtable.h>
-#include <asm/atarihw.h>
-#include <asm/atari_stram.h>
-#include <asm/io.h>
-
-
-/*
- * The ST-RAM allocator allocates memory from a pool of reserved ST-RAM of
- * configurable size, set aside on ST-RAM init.
- * As long as this pool is not exhausted, allocation of real ST-RAM can be
- * guaranteed.
- */
-
-/* set if kernel is in ST-RAM */
-static int kernel_in_stram;
-
-static struct resource stram_pool = {
-	.name = "ST-RAM Pool"
-};
-
-static unsigned long pool_size = 1024*1024;
-
-
-static int __init atari_stram_setup(char *arg)
-{
-	if (!MACH_IS_ATARI)
-		return 0;
-
-	pool_size = memparse(arg, NULL);
-	return 0;
-}
-
-early_param("stram_pool", atari_stram_setup);
-
-
-/*
- * This init function is called very early by atari/config.c
- * It initializes some internal variables needed for stram_alloc()
- */
-void __init atari_stram_init(void)
-{
-	int i;
-	void *stram_start;
-
-	/*
-	 * determine whether kernel code resides in ST-RAM
-	 * (then ST-RAM is the first memory block at virtual 0x0)
-	 */
-	stram_start = phys_to_virt(0);
-	kernel_in_stram = (stram_start == 0);
-
-	for (i = 0; i < m68k_num_memory; ++i) {
-		if (m68k_memory[i].addr == 0) {
-			return;
-		}
-	}
-
-	/* Should never come here! (There is always ST-Ram!) */
-	panic("atari_stram_init: no ST-RAM found!");
-}
-
-
-/*
- * This function is called from setup_arch() to reserve the pages needed for
- * ST-RAM management.
- */
-void __init atari_stram_reserve_pages(void *start_mem)
-{
-	/*
-	 * always reserve first page of ST-RAM, the first 2 KiB are
-	 * supervisor-only!
-	 */
-	if (!kernel_in_stram)
-		reserve_bootmem(0, PAGE_SIZE, BOOTMEM_DEFAULT);
-
-	stram_pool.start = (resource_size_t)alloc_bootmem_low_pages(pool_size);
-	stram_pool.end = stram_pool.start + pool_size - 1;
-	request_resource(&iomem_resource, &stram_pool);
-
-	pr_debug("atari_stram pool: size = %lu bytes, resource = %pR\n",
-		 pool_size, &stram_pool);
-}
-
-
-void *atari_stram_alloc(unsigned long size, const char *owner)
-{
-	struct resource *res;
-	int error;
-
-	pr_debug("atari_stram_alloc: allocate %lu bytes\n", size);
-
-	/* round up */
-	size = PAGE_ALIGN(size);
-
-	res = kzalloc(sizeof(struct resource), GFP_KERNEL);
-	if (!res)
-		return NULL;
-
-	res->name = owner;
-	error = allocate_resource(&stram_pool, res, size, 0, UINT_MAX,
-				  PAGE_SIZE, NULL, NULL);
-	if (error < 0) {
-		pr_err("atari_stram_alloc: allocate_resource() failed %d!\n",
-		       error);
-		kfree(res);
-		return NULL;
-	}
-
-	pr_debug("atari_stram_alloc: returning %pR\n", res);
-	return (void *)res->start;
-}
-EXPORT_SYMBOL(atari_stram_alloc);
-
-
-void atari_stram_free(void *addr)
-{
-	unsigned long start = (unsigned long)addr;
-	struct resource *res;
-	unsigned long size;
-
-	res = lookup_resource(&stram_pool, start);
-	if (!res) {
-		pr_err("atari_stram_free: trying to free nonexistent region "
-		       "at %p\n", addr);
-		return;
-	}
-
-	size = resource_size(res);
-	pr_debug("atari_stram_free: free %lu bytes at %p\n", size, addr);
-	release_resource(res);
-	kfree(res);
-}
-EXPORT_SYMBOL(atari_stram_free);
diff --git a/ANDROID_3.4.5/arch/m68k/atari/time.c b/ANDROID_3.4.5/arch/m68k/atari/time.c
deleted file mode 100644
index c0cc68a2..00000000
--- a/ANDROID_3.4.5/arch/m68k/atari/time.c
+++ /dev/null
@@ -1,357 +0,0 @@
-/*
- * linux/arch/m68k/atari/time.c
- *
- * Atari time and real time clock stuff
- *
- * Assembled of parts of former atari/config.c 97-12-18 by Roman Hodek
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file COPYING in the main directory of this archive
- * for more details.
- */
-
-#include <linux/types.h>
-#include <linux/mc146818rtc.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/rtc.h>
-#include <linux/bcd.h>
-#include <linux/delay.h>
-#include <linux/export.h>
-
-#include <asm/atariints.h>
-
-DEFINE_SPINLOCK(rtc_lock);
-EXPORT_SYMBOL_GPL(rtc_lock);
-
-void __init
-atari_sched_init(irq_handler_t timer_routine)
-{
-    /* set Timer C data Register */
-    st_mfp.tim_dt_c = INT_TICKS;
-    /* start timer C, div = 1:100 */
-    st_mfp.tim_ct_cd = (st_mfp.tim_ct_cd & 15) | 0x60;
-    /* install interrupt service routine for MFP Timer C */
-    if (request_irq(IRQ_MFP_TIMC, timer_routine, IRQ_TYPE_SLOW,
-		    "timer", timer_routine))
-	pr_err("Couldn't register timer interrupt\n");
-}
-
-/* ++andreas: gettimeoffset fixed to check for pending interrupt */
-
-#define TICK_SIZE 10000
-
-/* This is always executed with interrupts disabled.  */
-unsigned long atari_gettimeoffset (void)
-{
-  unsigned long ticks, offset = 0;
-
-  /* read MFP timer C current value */
-  ticks = st_mfp.tim_dt_c;
-  /* The probability of underflow is less than 2% */
-  if (ticks > INT_TICKS - INT_TICKS / 50)
-    /* Check for pending timer interrupt */
-    if (st_mfp.int_pn_b & (1 << 5))
-      offset = TICK_SIZE;
-
-  ticks = INT_TICKS - ticks;
-  ticks = ticks * 10000L / INT_TICKS;
-
-  return ticks + offset;
-}
-
-
-static void mste_read(struct MSTE_RTC *val)
-{
-#define COPY(v) val->v=(mste_rtc.v & 0xf)
-	do {
-		COPY(sec_ones) ; COPY(sec_tens) ; COPY(min_ones) ;
-		COPY(min_tens) ; COPY(hr_ones) ; COPY(hr_tens) ;
-		COPY(weekday) ; COPY(day_ones) ; COPY(day_tens) ;
-		COPY(mon_ones) ; COPY(mon_tens) ; COPY(year_ones) ;
-		COPY(year_tens) ;
-	/* prevent from reading the clock while it changed */
-	} while (val->sec_ones != (mste_rtc.sec_ones & 0xf));
-#undef COPY
-}
-
-static void mste_write(struct MSTE_RTC *val)
-{
-#define COPY(v) mste_rtc.v=val->v
-	do {
-		COPY(sec_ones) ; COPY(sec_tens) ; COPY(min_ones) ;
-		COPY(min_tens) ; COPY(hr_ones) ; COPY(hr_tens) ;
-		COPY(weekday) ; COPY(day_ones) ; COPY(day_tens) ;
-		COPY(mon_ones) ; COPY(mon_tens) ; COPY(year_ones) ;
-		COPY(year_tens) ;
-	/* prevent from writing the clock while it changed */
-	} while (val->sec_ones != (mste_rtc.sec_ones & 0xf));
-#undef COPY
-}
-
-#define	RTC_READ(reg)				\
-    ({	unsigned char	__val;			\
-		(void) atari_writeb(reg,&tt_rtc.regsel);	\
-		__val = tt_rtc.data;		\
-		__val;				\
-	})
-
-#define	RTC_WRITE(reg,val)			\
-    do {					\
-		atari_writeb(reg,&tt_rtc.regsel);	\
-		tt_rtc.data = (val);		\
-	} while(0)
-
-
-#define HWCLK_POLL_INTERVAL	5
-
-int atari_mste_hwclk( int op, struct rtc_time *t )
-{
-    int hour, year;
-    int hr24=0;
-    struct MSTE_RTC val;
-
-    mste_rtc.mode=(mste_rtc.mode | 1);
-    hr24=mste_rtc.mon_tens & 1;
-    mste_rtc.mode=(mste_rtc.mode & ~1);
-
-    if (op) {
-        /* write: prepare values */
-
-        val.sec_ones = t->tm_sec % 10;
-        val.sec_tens = t->tm_sec / 10;
-        val.min_ones = t->tm_min % 10;
-        val.min_tens = t->tm_min / 10;
-        hour = t->tm_hour;
-        if (!hr24) {
-	    if (hour > 11)
-		hour += 20 - 12;
-	    if (hour == 0 || hour == 20)
-		hour += 12;
-        }
-        val.hr_ones = hour % 10;
-        val.hr_tens = hour / 10;
-        val.day_ones = t->tm_mday % 10;
-        val.day_tens = t->tm_mday / 10;
-        val.mon_ones = (t->tm_mon+1) % 10;
-        val.mon_tens = (t->tm_mon+1) / 10;
-        year = t->tm_year - 80;
-        val.year_ones = year % 10;
-        val.year_tens = year / 10;
-        val.weekday = t->tm_wday;
-        mste_write(&val);
-        mste_rtc.mode=(mste_rtc.mode | 1);
-        val.year_ones = (year % 4);	/* leap year register */
-        mste_rtc.mode=(mste_rtc.mode & ~1);
-    }
-    else {
-        mste_read(&val);
-        t->tm_sec = val.sec_ones + val.sec_tens * 10;
-        t->tm_min = val.min_ones + val.min_tens * 10;
-        hour = val.hr_ones + val.hr_tens * 10;
-	if (!hr24) {
-	    if (hour == 12 || hour == 12 + 20)
-		hour -= 12;
-	    if (hour >= 20)
-                hour += 12 - 20;
-        }
-	t->tm_hour = hour;
-	t->tm_mday = val.day_ones + val.day_tens * 10;
-        t->tm_mon  = val.mon_ones + val.mon_tens * 10 - 1;
-        t->tm_year = val.year_ones + val.year_tens * 10 + 80;
-        t->tm_wday = val.weekday;
-    }
-    return 0;
-}
-
-int atari_tt_hwclk( int op, struct rtc_time *t )
-{
-    int sec=0, min=0, hour=0, day=0, mon=0, year=0, wday=0;
-    unsigned long	flags;
-    unsigned char	ctrl;
-    int pm = 0;
-
-    ctrl = RTC_READ(RTC_CONTROL); /* control registers are
-                                   * independent from the UIP */
-
-    if (op) {
-        /* write: prepare values */
-
-        sec  = t->tm_sec;
-        min  = t->tm_min;
-        hour = t->tm_hour;
-        day  = t->tm_mday;
-        mon  = t->tm_mon + 1;
-        year = t->tm_year - atari_rtc_year_offset;
-        wday = t->tm_wday + (t->tm_wday >= 0);
-
-        if (!(ctrl & RTC_24H)) {
-	    if (hour > 11) {
-		pm = 0x80;
-		if (hour != 12)
-		    hour -= 12;
-	    }
-	    else if (hour == 0)
-		hour = 12;
-        }
-
-        if (!(ctrl & RTC_DM_BINARY)) {
-	    sec = bin2bcd(sec);
-	    min = bin2bcd(min);
-	    hour = bin2bcd(hour);
-	    day = bin2bcd(day);
-	    mon = bin2bcd(mon);
-	    year = bin2bcd(year);
-	    if (wday >= 0)
-		wday = bin2bcd(wday);
-        }
-    }
-
-    /* Reading/writing the clock registers is a bit critical due to
-     * the regular update cycle of the RTC. While an update is in
-     * progress, registers 0..9 shouldn't be touched.
-     * The problem is solved like that: If an update is currently in
-     * progress (the UIP bit is set), the process sleeps for a while
-     * (50ms). This really should be enough, since the update cycle
-     * normally needs 2 ms.
-     * If the UIP bit reads as 0, we have at least 244 usecs until the
-     * update starts. This should be enough... But to be sure,
-     * additionally the RTC_SET bit is set to prevent an update cycle.
-     */
-
-    while( RTC_READ(RTC_FREQ_SELECT) & RTC_UIP ) {
-	if (in_atomic() || irqs_disabled())
-	    mdelay(1);
-	else
-	    schedule_timeout_interruptible(HWCLK_POLL_INTERVAL);
-    }
-
-    local_irq_save(flags);
-    RTC_WRITE( RTC_CONTROL, ctrl | RTC_SET );
-    if (!op) {
-        sec  = RTC_READ( RTC_SECONDS );
-        min  = RTC_READ( RTC_MINUTES );
-        hour = RTC_READ( RTC_HOURS );
-        day  = RTC_READ( RTC_DAY_OF_MONTH );
-        mon  = RTC_READ( RTC_MONTH );
-        year = RTC_READ( RTC_YEAR );
-        wday = RTC_READ( RTC_DAY_OF_WEEK );
-    }
-    else {
-        RTC_WRITE( RTC_SECONDS, sec );
-        RTC_WRITE( RTC_MINUTES, min );
-        RTC_WRITE( RTC_HOURS, hour + pm);
-        RTC_WRITE( RTC_DAY_OF_MONTH, day );
-        RTC_WRITE( RTC_MONTH, mon );
-        RTC_WRITE( RTC_YEAR, year );
-        if (wday >= 0) RTC_WRITE( RTC_DAY_OF_WEEK, wday );
-    }
-    RTC_WRITE( RTC_CONTROL, ctrl & ~RTC_SET );
-    local_irq_restore(flags);
-
-    if (!op) {
-        /* read: adjust values */
-
-        if (hour & 0x80) {
-	    hour &= ~0x80;
-	    pm = 1;
-	}
-
-	if (!(ctrl & RTC_DM_BINARY)) {
-	    sec = bcd2bin(sec);
-	    min = bcd2bin(min);
-	    hour = bcd2bin(hour);
-	    day = bcd2bin(day);
-	    mon = bcd2bin(mon);
-	    year = bcd2bin(year);
-	    wday = bcd2bin(wday);
-        }
-
-        if (!(ctrl & RTC_24H)) {
-	    if (!pm && hour == 12)
-		hour = 0;
-	    else if (pm && hour != 12)
-		hour += 12;
-        }
-
-        t->tm_sec  = sec;
-        t->tm_min  = min;
-        t->tm_hour = hour;
-        t->tm_mday = day;
-        t->tm_mon  = mon - 1;
-        t->tm_year = year + atari_rtc_year_offset;
-        t->tm_wday = wday - 1;
-    }
-
-    return( 0 );
-}
-
-
-int atari_mste_set_clock_mmss (unsigned long nowtime)
-{
-    short real_seconds = nowtime % 60, real_minutes = (nowtime / 60) % 60;
-    struct MSTE_RTC val;
-    unsigned char rtc_minutes;
-
-    mste_read(&val);
-    rtc_minutes= val.min_ones + val.min_tens * 10;
-    if ((rtc_minutes < real_minutes
-         ? real_minutes - rtc_minutes
-         : rtc_minutes - real_minutes) < 30)
-    {
-        val.sec_ones = real_seconds % 10;
-        val.sec_tens = real_seconds / 10;
-        val.min_ones = real_minutes % 10;
-        val.min_tens = real_minutes / 10;
-        mste_write(&val);
-    }
-    else
-        return -1;
-    return 0;
-}
-
-int atari_tt_set_clock_mmss (unsigned long nowtime)
-{
-    int retval = 0;
-    short real_seconds = nowtime % 60, real_minutes = (nowtime / 60) % 60;
-    unsigned char save_control, save_freq_select, rtc_minutes;
-
-    save_control = RTC_READ (RTC_CONTROL); /* tell the clock it's being set */
-    RTC_WRITE (RTC_CONTROL, save_control | RTC_SET);
-
-    save_freq_select = RTC_READ (RTC_FREQ_SELECT); /* stop and reset prescaler */
-    RTC_WRITE (RTC_FREQ_SELECT, save_freq_select | RTC_DIV_RESET2);
-
-    rtc_minutes = RTC_READ (RTC_MINUTES);
-    if (!(save_control & RTC_DM_BINARY))
-	rtc_minutes = bcd2bin(rtc_minutes);
-
-    /* Since we're only adjusting minutes and seconds, don't interfere
-       with hour overflow.  This avoids messing with unknown time zones
-       but requires your RTC not to be off by more than 30 minutes.  */
-    if ((rtc_minutes < real_minutes
-         ? real_minutes - rtc_minutes
-         : rtc_minutes - real_minutes) < 30)
-        {
-            if (!(save_control & RTC_DM_BINARY))
-                {
-		    real_seconds = bin2bcd(real_seconds);
-		    real_minutes = bin2bcd(real_minutes);
-                }
-            RTC_WRITE (RTC_SECONDS, real_seconds);
-            RTC_WRITE (RTC_MINUTES, real_minutes);
-        }
-    else
-        retval = -1;
-
-    RTC_WRITE (RTC_FREQ_SELECT, save_freq_select);
-    RTC_WRITE (RTC_CONTROL, save_control);
-    return retval;
-}
-
-/*
- * Local variables:
- *  c-indent-level: 4
- *  tab-width: 8
- * End:
- */
diff --git a/ANDROID_3.4.5/arch/m68k/bvme6000/Makefile b/ANDROID_3.4.5/arch/m68k/bvme6000/Makefile
deleted file mode 100644
index d8174004..00000000
--- a/ANDROID_3.4.5/arch/m68k/bvme6000/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-#
-# Makefile for Linux arch/m68k/bvme6000 source directory
-#
-
-obj-y		:= config.o rtc.o
diff --git a/ANDROID_3.4.5/arch/m68k/bvme6000/config.c b/ANDROID_3.4.5/arch/m68k/bvme6000/config.c
deleted file mode 100644
index 0bf850a2..00000000
--- a/ANDROID_3.4.5/arch/m68k/bvme6000/config.c
+++ /dev/null
@@ -1,349 +0,0 @@
-/*
- *  arch/m68k/bvme6000/config.c
- *
- *  Copyright (C) 1997 Richard Hirst [richard@sleepie.demon.co.uk]
- *
- * Based on:
- *
- *  linux/amiga/config.c
- *
- *  Copyright (C) 1993 Hamish Macdonald
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file README.legal in the main directory of this archive
- * for more details.
- */
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/tty.h>
-#include <linux/console.h>
-#include <linux/linkage.h>
-#include <linux/init.h>
-#include <linux/major.h>
-#include <linux/genhd.h>
-#include <linux/rtc.h>
-#include <linux/interrupt.h>
-#include <linux/bcd.h>
-
-#include <asm/bootinfo.h>
-#include <asm/pgtable.h>
-#include <asm/setup.h>
-#include <asm/irq.h>
-#include <asm/traps.h>
-#include <asm/rtc.h>
-#include <asm/machdep.h>
-#include <asm/bvme6000hw.h>
-
-static void bvme6000_get_model(char *model);
-extern void bvme6000_sched_init(irq_handler_t handler);
-extern unsigned long bvme6000_gettimeoffset (void);
-extern int bvme6000_hwclk (int, struct rtc_time *);
-extern int bvme6000_set_clock_mmss (unsigned long);
-extern void bvme6000_reset (void);
-void bvme6000_set_vectors (void);
-
-/* Save tick handler routine pointer, will point to xtime_update() in
- * kernel/timer/timekeeping.c, called via bvme6000_process_int() */
-
-static irq_handler_t tick_handler;
-
-
-int bvme6000_parse_bootinfo(const struct bi_record *bi)
-{
-	if (bi->tag == BI_VME_TYPE)
-		return 0;
-	else
-		return 1;
-}
-
-void bvme6000_reset(void)
-{
-	volatile PitRegsPtr pit = (PitRegsPtr)BVME_PIT_BASE;
-
-	printk ("\r\n\nCalled bvme6000_reset\r\n"
-			"\r\r\r\r\r\r\r\r\r\r\r\r\r\r\r\r\r\r");
-	/* The string of returns is to delay the reset until the whole
-	 * message is output. */
-	/* Enable the watchdog, via PIT port C bit 4 */
-
-	pit->pcddr	|= 0x10;	/* WDOG enable */
-
-	while(1)
-		;
-}
-
-static void bvme6000_get_model(char *model)
-{
-    sprintf(model, "BVME%d000", m68k_cputype == CPU_68060 ? 6 : 4);
-}
-
-/*
- * This function is called during kernel startup to initialize
- * the bvme6000 IRQ handling routines.
- */
-static void __init bvme6000_init_IRQ(void)
-{
-	m68k_setup_user_interrupt(VEC_USER, 192);
-}
-
-void __init config_bvme6000(void)
-{
-    volatile PitRegsPtr pit = (PitRegsPtr)BVME_PIT_BASE;
-
-    /* Board type is only set by newer versions of vmelilo/tftplilo */
-    if (!vme_brdtype) {
-	if (m68k_cputype == CPU_68060)
-	    vme_brdtype = VME_TYPE_BVME6000;
-	else
-	    vme_brdtype = VME_TYPE_BVME4000;
-    }
-#if 0
-    /* Call bvme6000_set_vectors() so ABORT will work, along with BVMBug
-     * debugger.  Note trap_init() will splat the abort vector, but
-     * bvme6000_init_IRQ() will put it back again.  Hopefully. */
-
-    bvme6000_set_vectors();
-#endif
-
-    mach_max_dma_address = 0xffffffff;
-    mach_sched_init      = bvme6000_sched_init;
-    mach_init_IRQ        = bvme6000_init_IRQ;
-    mach_gettimeoffset   = bvme6000_gettimeoffset;
-    mach_hwclk           = bvme6000_hwclk;
-    mach_set_clock_mmss	 = bvme6000_set_clock_mmss;
-    mach_reset		 = bvme6000_reset;
-    mach_get_model       = bvme6000_get_model;
-
-    printk ("Board is %sconfigured as a System Controller\n",
-		*config_reg_ptr & BVME_CONFIG_SW1 ? "" : "not ");
-
-    /* Now do the PIT configuration */
-
-    pit->pgcr	= 0x00;	/* Unidirectional 8 bit, no handshake for now */
-    pit->psrr	= 0x18;	/* PIACK and PIRQ functions enabled */
-    pit->pacr	= 0x00;	/* Sub Mode 00, H2 i/p, no DMA */
-    pit->padr	= 0x00;	/* Just to be tidy! */
-    pit->paddr	= 0x00;	/* All inputs for now (safest) */
-    pit->pbcr	= 0x80;	/* Sub Mode 1x, H4 i/p, no DMA */
-    pit->pbdr	= 0xbc | (*config_reg_ptr & BVME_CONFIG_SW1 ? 0 : 0x40);
-			/* PRI, SYSCON?, Level3, SCC clks from xtal */
-    pit->pbddr	= 0xf3;	/* Mostly outputs */
-    pit->pcdr	= 0x01;	/* PA transceiver disabled */
-    pit->pcddr	= 0x03;	/* WDOG disable */
-
-    /* Disable snooping for Ethernet and VME accesses */
-
-    bvme_acr_addrctl = 0;
-}
-
-
-irqreturn_t bvme6000_abort_int (int irq, void *dev_id)
-{
-        unsigned long *new = (unsigned long *)vectors;
-        unsigned long *old = (unsigned long *)0xf8000000;
-
-        /* Wait for button release */
-        while (*(volatile unsigned char *)BVME_LOCAL_IRQ_STAT & BVME_ABORT_STATUS)
-                ;
-
-        *(new+4) = *(old+4);            /* Illegal instruction */
-        *(new+9) = *(old+9);            /* Trace */
-        *(new+47) = *(old+47);          /* Trap #15 */
-        *(new+0x1f) = *(old+0x1f);      /* ABORT switch */
-	return IRQ_HANDLED;
-}
-
-
-static irqreturn_t bvme6000_timer_int (int irq, void *dev_id)
-{
-    volatile RtcPtr_t rtc = (RtcPtr_t)BVME_RTC_BASE;
-    unsigned char msr = rtc->msr & 0xc0;
-
-    rtc->msr = msr | 0x20;		/* Ack the interrupt */
-
-    return tick_handler(irq, dev_id);
-}
-
-/*
- * Set up the RTC timer 1 to mode 2, so T1 output toggles every 5ms
- * (40000 x 125ns).  It will interrupt every 10ms, when T1 goes low.
- * So, when reading the elapsed time, you should read timer1,
- * subtract it from 39999, and then add 40000 if T1 is high.
- * That gives you the number of 125ns ticks in to the 10ms period,
- * so divide by 8 to get the microsecond result.
- */
-
-void bvme6000_sched_init (irq_handler_t timer_routine)
-{
-    volatile RtcPtr_t rtc = (RtcPtr_t)BVME_RTC_BASE;
-    unsigned char msr = rtc->msr & 0xc0;
-
-    rtc->msr = 0;	/* Ensure timer registers accessible */
-
-    tick_handler = timer_routine;
-    if (request_irq(BVME_IRQ_RTC, bvme6000_timer_int, 0,
-				"timer", bvme6000_timer_int))
-	panic ("Couldn't register timer int");
-
-    rtc->t1cr_omr = 0x04;	/* Mode 2, ext clk */
-    rtc->t1msb = 39999 >> 8;
-    rtc->t1lsb = 39999 & 0xff;
-    rtc->irr_icr1 &= 0xef;	/* Route timer 1 to INTR pin */
-    rtc->msr = 0x40;		/* Access int.cntrl, etc */
-    rtc->pfr_icr0 = 0x80;	/* Just timer 1 ints enabled */
-    rtc->irr_icr1 = 0;
-    rtc->t1cr_omr = 0x0a;	/* INTR+T1 active lo, push-pull */
-    rtc->t0cr_rtmr &= 0xdf;	/* Stop timers in standby */
-    rtc->msr = 0;		/* Access timer 1 control */
-    rtc->t1cr_omr = 0x05;	/* Mode 2, ext clk, GO */
-
-    rtc->msr = msr;
-
-    if (request_irq(BVME_IRQ_ABORT, bvme6000_abort_int, 0,
-				"abort", bvme6000_abort_int))
-	panic ("Couldn't register abort int");
-}
-
-
-/* This is always executed with interrupts disabled.  */
-
-/*
- * NOTE:  Don't accept any readings within 5us of rollover, as
- * the T1INT bit may be a little slow getting set.  There is also
- * a fault in the chip, meaning that reads may produce invalid
- * results...
- */
-
-unsigned long bvme6000_gettimeoffset (void)
-{
-    volatile RtcPtr_t rtc = (RtcPtr_t)BVME_RTC_BASE;
-    volatile PitRegsPtr pit = (PitRegsPtr)BVME_PIT_BASE;
-    unsigned char msr = rtc->msr & 0xc0;
-    unsigned char t1int, t1op;
-    unsigned long v = 800000, ov;
-
-    rtc->msr = 0;	/* Ensure timer registers accessible */
-
-    do {
-	ov = v;
-	t1int = rtc->msr & 0x20;
-	t1op  = pit->pcdr & 0x04;
-	rtc->t1cr_omr |= 0x40;		/* Latch timer1 */
-	v = rtc->t1msb << 8;		/* Read timer1 */
-	v |= rtc->t1lsb;		/* Read timer1 */
-    } while (t1int != (rtc->msr & 0x20) ||
-		t1op != (pit->pcdr & 0x04) ||
-			abs(ov-v) > 80 ||
-				v > 39960);
-
-    v = 39999 - v;
-    if (!t1op)				/* If in second half cycle.. */
-	v += 40000;
-    v /= 8;				/* Convert ticks to microseconds */
-    if (t1int)
-	v += 10000;			/* Int pending, + 10ms */
-    rtc->msr = msr;
-
-    return v;
-}
-
-/*
- * Looks like op is non-zero for setting the clock, and zero for
- * reading the clock.
- *
- *  struct hwclk_time {
- *         unsigned        sec;       0..59
- *         unsigned        min;       0..59
- *         unsigned        hour;      0..23
- *         unsigned        day;       1..31
- *         unsigned        mon;       0..11
- *         unsigned        year;      00...
- *         int             wday;      0..6, 0 is Sunday, -1 means unknown/don't set
- * };
- */
-
-int bvme6000_hwclk(int op, struct rtc_time *t)
-{
-	volatile RtcPtr_t rtc = (RtcPtr_t)BVME_RTC_BASE;
-	unsigned char msr = rtc->msr & 0xc0;
-
-	rtc->msr = 0x40;	/* Ensure clock and real-time-mode-register
-				 * are accessible */
-	if (op)
-	{	/* Write.... */
-		rtc->t0cr_rtmr = t->tm_year%4;
-		rtc->bcd_tenms = 0;
-		rtc->bcd_sec = bin2bcd(t->tm_sec);
-		rtc->bcd_min = bin2bcd(t->tm_min);
-		rtc->bcd_hr  = bin2bcd(t->tm_hour);
-		rtc->bcd_dom = bin2bcd(t->tm_mday);
-		rtc->bcd_mth = bin2bcd(t->tm_mon + 1);
-		rtc->bcd_year = bin2bcd(t->tm_year%100);
-		if (t->tm_wday >= 0)
-			rtc->bcd_dow = bin2bcd(t->tm_wday+1);
-		rtc->t0cr_rtmr = t->tm_year%4 | 0x08;
-	}
-	else
-	{	/* Read....  */
-		do {
-			t->tm_sec  = bcd2bin(rtc->bcd_sec);
-			t->tm_min  = bcd2bin(rtc->bcd_min);
-			t->tm_hour = bcd2bin(rtc->bcd_hr);
-			t->tm_mday = bcd2bin(rtc->bcd_dom);
-			t->tm_mon  = bcd2bin(rtc->bcd_mth)-1;
-			t->tm_year = bcd2bin(rtc->bcd_year);
-			if (t->tm_year < 70)
-				t->tm_year += 100;
-			t->tm_wday = bcd2bin(rtc->bcd_dow)-1;
-		} while (t->tm_sec != bcd2bin(rtc->bcd_sec));
-	}
-
-	rtc->msr = msr;
-
-	return 0;
-}
-
-/*
- * Set the minutes and seconds from seconds value 'nowtime'.  Fail if
- * clock is out by > 30 minutes.  Logic lifted from atari code.
- * Algorithm is to wait for the 10ms register to change, and then to
- * wait a short while, and then set it.
- */
-
-int bvme6000_set_clock_mmss (unsigned long nowtime)
-{
-	int retval = 0;
-	short real_seconds = nowtime % 60, real_minutes = (nowtime / 60) % 60;
-	unsigned char rtc_minutes, rtc_tenms;
-	volatile RtcPtr_t rtc = (RtcPtr_t)BVME_RTC_BASE;
-	unsigned char msr = rtc->msr & 0xc0;
-	unsigned long flags;
-	volatile int i;
-
-	rtc->msr = 0;		/* Ensure clock accessible */
-	rtc_minutes = bcd2bin (rtc->bcd_min);
-
-	if ((rtc_minutes < real_minutes
-		? real_minutes - rtc_minutes
-			: rtc_minutes - real_minutes) < 30)
-	{
-		local_irq_save(flags);
-		rtc_tenms = rtc->bcd_tenms;
-		while (rtc_tenms == rtc->bcd_tenms)
-			;
-		for (i = 0; i < 1000; i++)
-			;
-		rtc->bcd_min = bin2bcd(real_minutes);
-		rtc->bcd_sec = bin2bcd(real_seconds);
-		local_irq_restore(flags);
-	}
-	else
-		retval = -1;
-
-	rtc->msr = msr;
-
-	return retval;
-}
-
diff --git a/ANDROID_3.4.5/arch/m68k/bvme6000/rtc.c b/ANDROID_3.4.5/arch/m68k/bvme6000/rtc.c
deleted file mode 100644
index cf12a17d..00000000
--- a/ANDROID_3.4.5/arch/m68k/bvme6000/rtc.c
+++ /dev/null
@@ -1,174 +0,0 @@
-/*
- *	Real Time Clock interface for Linux on the BVME6000
- *
- * Based on the PC driver by Paul Gortmaker.
- */
-
-#define RTC_VERSION		"1.00"
-
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <linux/miscdevice.h>
-#include <linux/ioport.h>
-#include <linux/capability.h>
-#include <linux/fcntl.h>
-#include <linux/init.h>
-#include <linux/poll.h>
-#include <linux/module.h>
-#include <linux/mc146818rtc.h>	/* For struct rtc_time and ioctls, etc */
-#include <linux/bcd.h>
-#include <asm/bvme6000hw.h>
-
-#include <asm/io.h>
-#include <asm/uaccess.h>
-#include <asm/setup.h>
-
-/*
- *	We sponge a minor off of the misc major. No need slurping
- *	up another valuable major dev number for this. If you add
- *	an ioctl, make sure you don't conflict with SPARC's RTC
- *	ioctls.
- */
-
-static unsigned char days_in_mo[] =
-{0, 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31};
-
-static atomic_t rtc_status = ATOMIC_INIT(1);
-
-static long rtc_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
-{
-	volatile RtcPtr_t rtc = (RtcPtr_t)BVME_RTC_BASE;
-	unsigned char msr;
-	unsigned long flags;
-	struct rtc_time wtime;
-	void __user *argp = (void __user *)arg;
-
-	switch (cmd) {
-	case RTC_RD_TIME:	/* Read the time/date from RTC	*/
-	{
-		local_irq_save(flags);
-		/* Ensure clock and real-time-mode-register are accessible */
-		msr = rtc->msr & 0xc0;
-		rtc->msr = 0x40;
-		memset(&wtime, 0, sizeof(struct rtc_time));
-		do {
-			wtime.tm_sec =  bcd2bin(rtc->bcd_sec);
-			wtime.tm_min =  bcd2bin(rtc->bcd_min);
-			wtime.tm_hour = bcd2bin(rtc->bcd_hr);
-			wtime.tm_mday =  bcd2bin(rtc->bcd_dom);
-			wtime.tm_mon =  bcd2bin(rtc->bcd_mth)-1;
-			wtime.tm_year = bcd2bin(rtc->bcd_year);
-			if (wtime.tm_year < 70)
-				wtime.tm_year += 100;
-			wtime.tm_wday = bcd2bin(rtc->bcd_dow)-1;
-		} while (wtime.tm_sec != bcd2bin(rtc->bcd_sec));
-		rtc->msr = msr;
-		local_irq_restore(flags);
-		return copy_to_user(argp, &wtime, sizeof wtime) ?
-								-EFAULT : 0;
-	}
-	case RTC_SET_TIME:	/* Set the RTC */
-	{
-		struct rtc_time rtc_tm;
-		unsigned char mon, day, hrs, min, sec, leap_yr;
-		unsigned int yrs;
-
-		if (!capable(CAP_SYS_ADMIN))
-			return -EACCES;
-
-		if (copy_from_user(&rtc_tm, argp, sizeof(struct rtc_time)))
-			return -EFAULT;
-
-		yrs = rtc_tm.tm_year;
-		if (yrs < 1900)
-			yrs += 1900;
-		mon = rtc_tm.tm_mon + 1;   /* tm_mon starts at zero */
-		day = rtc_tm.tm_mday;
-		hrs = rtc_tm.tm_hour;
-		min = rtc_tm.tm_min;
-		sec = rtc_tm.tm_sec;
-
-		leap_yr = ((!(yrs % 4) && (yrs % 100)) || !(yrs % 400));
-
-		if ((mon > 12) || (mon < 1) || (day == 0))
-			return -EINVAL;
-
-		if (day > (days_in_mo[mon] + ((mon == 2) && leap_yr)))
-			return -EINVAL;
-
-		if ((hrs >= 24) || (min >= 60) || (sec >= 60))
-			return -EINVAL;
-
-		if (yrs >= 2070)
-			return -EINVAL;
-
-		local_irq_save(flags);
-		/* Ensure clock and real-time-mode-register are accessible */
-		msr = rtc->msr & 0xc0;
-		rtc->msr = 0x40;
-
-		rtc->t0cr_rtmr = yrs%4;
-		rtc->bcd_tenms = 0;
-		rtc->bcd_sec   = bin2bcd(sec);
-		rtc->bcd_min   = bin2bcd(min);
-		rtc->bcd_hr    = bin2bcd(hrs);
-		rtc->bcd_dom   = bin2bcd(day);
-		rtc->bcd_mth   = bin2bcd(mon);
-		rtc->bcd_year  = bin2bcd(yrs%100);
-		if (rtc_tm.tm_wday >= 0)
-			rtc->bcd_dow = bin2bcd(rtc_tm.tm_wday+1);
-		rtc->t0cr_rtmr = yrs%4 | 0x08;
-
-		rtc->msr = msr;
-		local_irq_restore(flags);
-		return 0;
-	}
-	default:
-		return -EINVAL;
-	}
-}
-
-/*
- * We enforce only one user at a time here with the open/close.
- */
-static int rtc_open(struct inode *inode, struct file *file)
-{
-	if (!atomic_dec_and_test(&rtc_status)) {
-		atomic_inc(&rtc_status);
-		return -EBUSY;
-	}
-	return 0;
-}
-
-static int rtc_release(struct inode *inode, struct file *file)
-{
-	atomic_inc(&rtc_status);
-	return 0;
-}
-
-/*
- *	The various file operations we support.
- */
-
-static const struct file_operations rtc_fops = {
-	.unlocked_ioctl	= rtc_ioctl,
-	.open		= rtc_open,
-	.release	= rtc_release,
-	.llseek		= noop_llseek,
-};
-
-static struct miscdevice rtc_dev = {
-	.minor =	RTC_MINOR,
-	.name =		"rtc",
-	.fops =		&rtc_fops
-};
-
-static int __init rtc_DP8570A_init(void)
-{
-	if (!MACH_IS_BVME6000)
-		return -ENODEV;
-
-	printk(KERN_INFO "DP8570A Real Time Clock Driver v%s\n", RTC_VERSION);
-	return misc_register(&rtc_dev);
-}
-module_init(rtc_DP8570A_init);
diff --git a/ANDROID_3.4.5/arch/m68k/configs/amiga_defconfig b/ANDROID_3.4.5/arch/m68k/configs/amiga_defconfig
deleted file mode 100644
index e93fdae1..00000000
--- a/ANDROID_3.4.5/arch/m68k/configs/amiga_defconfig
+++ /dev/null
@@ -1,379 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_LOCALVERSION="-amiga"
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_RELAY=y
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_AMIGA=y
-CONFIG_M68020=y
-CONFIG_M68030=y
-CONFIG_M68040=y
-CONFIG_M68060=y
-CONFIG_BINFMT_AOUT=m
-CONFIG_BINFMT_MISC=m
-CONFIG_ZORRO=y
-CONFIG_AMIGA_PCMCIA=y
-CONFIG_HEARTBEAT=y
-CONFIG_PROC_HARDWARE=y
-CONFIG_ZORRO_NAMES=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_NET_KEY_MIGRATE=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_NET_IPIP=m
-CONFIG_NET_IPGRE=m
-CONFIG_SYN_COOKIES=y
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-CONFIG_INET_IPCOMP=m
-CONFIG_INET_XFRM_MODE_TRANSPORT=m
-CONFIG_INET_XFRM_MODE_TUNNEL=m
-CONFIG_INET_XFRM_MODE_BEET=m
-CONFIG_INET_DIAG=m
-CONFIG_IPV6_PRIVACY=y
-CONFIG_IPV6_ROUTER_PREF=y
-CONFIG_IPV6_ROUTE_INFO=y
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
-CONFIG_IPV6_TUNNEL=m
-CONFIG_NETFILTER=y
-CONFIG_NETFILTER_NETLINK_QUEUE=m
-CONFIG_NF_CONNTRACK=m
-# CONFIG_NF_CT_PROTO_DCCP is not set
-CONFIG_NF_CT_PROTO_UDPLITE=m
-CONFIG_NF_CONNTRACK_AMANDA=m
-CONFIG_NF_CONNTRACK_FTP=m
-CONFIG_NF_CONNTRACK_H323=m
-CONFIG_NF_CONNTRACK_IRC=m
-CONFIG_NF_CONNTRACK_NETBIOS_NS=m
-CONFIG_NF_CONNTRACK_PPTP=m
-CONFIG_NF_CONNTRACK_SANE=m
-CONFIG_NF_CONNTRACK_SIP=m
-CONFIG_NF_CONNTRACK_TFTP=m
-CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
-CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
-CONFIG_NETFILTER_XT_TARGET_DSCP=m
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFLOG=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
-CONFIG_NETFILTER_XT_TARGET_TRACE=m
-CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
-CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
-CONFIG_NETFILTER_XT_MATCH_COMMENT=m
-CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
-CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
-CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_DSCP=m
-CONFIG_NETFILTER_XT_MATCH_ESP=m
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
-CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
-CONFIG_NETFILTER_XT_MATCH_OWNER=m
-CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
-CONFIG_NETFILTER_XT_MATCH_QUOTA=m
-CONFIG_NETFILTER_XT_MATCH_RATEEST=m
-CONFIG_NETFILTER_XT_MATCH_REALM=m
-CONFIG_NETFILTER_XT_MATCH_RECENT=m
-CONFIG_NETFILTER_XT_MATCH_STATE=m
-CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
-CONFIG_NETFILTER_XT_MATCH_STRING=m
-CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_TIME=m
-CONFIG_NETFILTER_XT_MATCH_U32=m
-CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_AH=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_NF_NAT=m
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-CONFIG_NF_CONNTRACK_IPV6=m
-CONFIG_IP6_NF_QUEUE=m
-CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_AH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_MATCH_FRAG=m
-CONFIG_IP6_NF_MATCH_OPTS=m
-CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_MH=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_TARGET_HL=m
-CONFIG_IP6_NF_TARGET_LOG=m
-CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_TARGET_REJECT=m
-CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_RAW=m
-CONFIG_IP_DCCP=m
-# CONFIG_IP_DCCP_CCID3 is not set
-CONFIG_ATALK=m
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_CONNECTOR=m
-CONFIG_PARPORT=m
-CONFIG_PARPORT_AMIGA=m
-CONFIG_PARPORT_MFC3=m
-CONFIG_PARPORT_1284=y
-CONFIG_AMIGA_FLOPPY=y
-CONFIG_AMIGA_Z2RAM=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_ATA_OVER_ETH=m
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDECD=y
-CONFIG_BLK_DEV_GAYLE=y
-CONFIG_BLK_DEV_BUDDHA=y
-CONFIG_RAID_ATTRS=m
-CONFIG_SCSI=y
-CONFIG_SCSI_TGT=m
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=m
-CONFIG_CHR_DEV_OSST=m
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=m
-CONFIG_SCSI_CONSTANTS=y
-CONFIG_SCSI_SAS_LIBSAS=m
-# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
-CONFIG_SCSI_SRP_ATTRS=m
-CONFIG_SCSI_SRP_TGT_ATTRS=y
-CONFIG_ISCSI_TCP=m
-CONFIG_A3000_SCSI=y
-CONFIG_A2091_SCSI=y
-CONFIG_GVP11_SCSI=y
-CONFIG_SCSI_A4000T=y
-CONFIG_SCSI_ZORRO7XX=y
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-CONFIG_MD_RAID456=m
-CONFIG_BLK_DEV_DM=m
-CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
-CONFIG_DM_MULTIPATH=m
-CONFIG_DM_UEVENT=y
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=m
-CONFIG_MACVLAN=m
-CONFIG_EQUALIZER=m
-CONFIG_VETH=m
-CONFIG_NET_ETHERNET=y
-CONFIG_ARIADNE=y
-CONFIG_A2065=y
-CONFIG_HYDRA=y
-CONFIG_ZORRO8390=y
-CONFIG_APNE=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-CONFIG_PPP=m
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_MPPE=m
-CONFIG_PPPOE=m
-CONFIG_SLIP=m
-CONFIG_SLIP_COMPRESSED=y
-CONFIG_SLIP_SMART=y
-CONFIG_SLIP_MODE_SLIP6=y
-CONFIG_NETCONSOLE=m
-CONFIG_NETCONSOLE_DYNAMIC=y
-CONFIG_INPUT_FF_MEMLESS=m
-CONFIG_KEYBOARD_AMIGA=y
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_MOUSE_PS2 is not set
-CONFIG_MOUSE_AMIGA=m
-CONFIG_INPUT_JOYSTICK=y
-CONFIG_JOYSTICK_AMIGA=m
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_M68K_BEEP=m
-# CONFIG_SERIO is not set
-CONFIG_VT_HW_CONSOLE_BINDING=y
-# CONFIG_DEVKMEM is not set
-CONFIG_PRINTER=m
-# CONFIG_HW_RANDOM is not set
-CONFIG_GEN_RTC=m
-CONFIG_GEN_RTC_X=y
-# CONFIG_HWMON is not set
-CONFIG_FB=y
-CONFIG_FB_CIRRUS=y
-CONFIG_FB_AMIGA=y
-CONFIG_FB_AMIGA_OCS=y
-CONFIG_FB_AMIGA_ECS=y
-CONFIG_FB_AMIGA_AGA=y
-CONFIG_FB_FM2=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-CONFIG_SOUND=m
-CONFIG_DMASOUND_PAULA=m
-CONFIG_HID=m
-CONFIG_HIDRAW=y
-# CONFIG_USB_SUPPORT is not set
-CONFIG_AMIGA_BUILTIN_SERIAL=y
-CONFIG_SERIAL_CONSOLE=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_REISERFS_FS=m
-CONFIG_JFS_FS=m
-CONFIG_XFS_FS=m
-CONFIG_OCFS2_FS=m
-# CONFIG_OCFS2_FS_STATS is not set
-# CONFIG_OCFS2_DEBUG_MASKLOG is not set
-CONFIG_QUOTA_NETLINK_INTERFACE=y
-# CONFIG_PRINT_QUOTA_WARNING is not set
-CONFIG_AUTOFS_FS=m
-CONFIG_AUTOFS4_FS=m
-CONFIG_FUSE_FS=m
-CONFIG_ISO9660_FS=y
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_UDF_FS=m
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=m
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_AFFS_FS=m
-CONFIG_HFS_FS=m
-CONFIG_HFSPLUS_FS=m
-CONFIG_CRAMFS=m
-CONFIG_SQUASHFS=m
-CONFIG_MINIX_FS=y
-CONFIG_HPFS_FS=m
-CONFIG_SYSV_FS=m
-CONFIG_UFS_FS=m
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
-CONFIG_SMB_FS=m
-CONFIG_SMB_NLS_DEFAULT=y
-CONFIG_CODA_FS=m
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
-CONFIG_DLM=m
-CONFIG_MAGIC_SYSRQ=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_CCM=m
-CONFIG_CRYPTO_GCM=m
-CONFIG_CRYPTO_CTS=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_XTS=m
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_RMD128=m
-CONFIG_CRYPTO_RMD160=m
-CONFIG_CRYPTO_RMD256=m
-CONFIG_CRYPTO_RMD320=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_CAMELLIA=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_SALSA20=m
-CONFIG_CRYPTO_SEED=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_ZLIB=m
-CONFIG_CRYPTO_LZO=m
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_HW is not set
-CONFIG_CRC16=m
-CONFIG_CRC_T10DIF=y
diff --git a/ANDROID_3.4.5/arch/m68k/configs/apollo_defconfig b/ANDROID_3.4.5/arch/m68k/configs/apollo_defconfig
deleted file mode 100644
index 66b26c1e..00000000
--- a/ANDROID_3.4.5/arch/m68k/configs/apollo_defconfig
+++ /dev/null
@@ -1,347 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_LOCALVERSION="-apollo"
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_RELAY=y
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_APOLLO=y
-CONFIG_M68020=y
-CONFIG_M68030=y
-CONFIG_M68040=y
-CONFIG_M68060=y
-CONFIG_BINFMT_AOUT=m
-CONFIG_BINFMT_MISC=m
-CONFIG_HEARTBEAT=y
-CONFIG_PROC_HARDWARE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_NET_KEY_MIGRATE=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-CONFIG_NET_IPIP=m
-CONFIG_NET_IPGRE=m
-CONFIG_SYN_COOKIES=y
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-CONFIG_INET_IPCOMP=m
-CONFIG_INET_XFRM_MODE_TRANSPORT=m
-CONFIG_INET_XFRM_MODE_TUNNEL=m
-CONFIG_INET_XFRM_MODE_BEET=m
-CONFIG_INET_DIAG=m
-CONFIG_IPV6_PRIVACY=y
-CONFIG_IPV6_ROUTER_PREF=y
-CONFIG_IPV6_ROUTE_INFO=y
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
-CONFIG_IPV6_TUNNEL=m
-CONFIG_NETFILTER=y
-CONFIG_NETFILTER_NETLINK_QUEUE=m
-CONFIG_NF_CONNTRACK=m
-# CONFIG_NF_CT_PROTO_DCCP is not set
-CONFIG_NF_CT_PROTO_UDPLITE=m
-CONFIG_NF_CONNTRACK_AMANDA=m
-CONFIG_NF_CONNTRACK_FTP=m
-CONFIG_NF_CONNTRACK_H323=m
-CONFIG_NF_CONNTRACK_IRC=m
-CONFIG_NF_CONNTRACK_NETBIOS_NS=m
-CONFIG_NF_CONNTRACK_PPTP=m
-CONFIG_NF_CONNTRACK_SANE=m
-CONFIG_NF_CONNTRACK_SIP=m
-CONFIG_NF_CONNTRACK_TFTP=m
-CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
-CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
-CONFIG_NETFILTER_XT_TARGET_DSCP=m
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFLOG=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
-CONFIG_NETFILTER_XT_TARGET_TRACE=m
-CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
-CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
-CONFIG_NETFILTER_XT_MATCH_COMMENT=m
-CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
-CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
-CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_DSCP=m
-CONFIG_NETFILTER_XT_MATCH_ESP=m
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
-CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
-CONFIG_NETFILTER_XT_MATCH_OWNER=m
-CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
-CONFIG_NETFILTER_XT_MATCH_QUOTA=m
-CONFIG_NETFILTER_XT_MATCH_RATEEST=m
-CONFIG_NETFILTER_XT_MATCH_REALM=m
-CONFIG_NETFILTER_XT_MATCH_RECENT=m
-CONFIG_NETFILTER_XT_MATCH_STATE=m
-CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
-CONFIG_NETFILTER_XT_MATCH_STRING=m
-CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_TIME=m
-CONFIG_NETFILTER_XT_MATCH_U32=m
-CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_AH=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_NF_NAT=m
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-CONFIG_NF_CONNTRACK_IPV6=m
-CONFIG_IP6_NF_QUEUE=m
-CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_AH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_MATCH_FRAG=m
-CONFIG_IP6_NF_MATCH_OPTS=m
-CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_MH=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_TARGET_HL=m
-CONFIG_IP6_NF_TARGET_LOG=m
-CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_TARGET_REJECT=m
-CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_RAW=m
-CONFIG_IP_DCCP=m
-# CONFIG_IP_DCCP_CCID3 is not set
-CONFIG_ATALK=m
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_CONNECTOR=m
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_ATA_OVER_ETH=m
-CONFIG_RAID_ATTRS=m
-CONFIG_SCSI=y
-CONFIG_SCSI_TGT=m
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=m
-CONFIG_CHR_DEV_OSST=m
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=m
-CONFIG_SCSI_CONSTANTS=y
-CONFIG_SCSI_SAS_LIBSAS=m
-# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
-CONFIG_SCSI_SRP_ATTRS=m
-CONFIG_SCSI_SRP_TGT_ATTRS=y
-CONFIG_ISCSI_TCP=m
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-CONFIG_MD_RAID456=m
-CONFIG_BLK_DEV_DM=m
-CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
-CONFIG_DM_MULTIPATH=m
-CONFIG_DM_UEVENT=y
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=m
-CONFIG_MACVLAN=m
-CONFIG_EQUALIZER=m
-CONFIG_VETH=m
-CONFIG_NET_ETHERNET=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-CONFIG_PPP=m
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_MPPE=m
-CONFIG_PPPOE=m
-CONFIG_SLIP=m
-CONFIG_SLIP_COMPRESSED=y
-CONFIG_SLIP_SMART=y
-CONFIG_SLIP_MODE_SLIP6=y
-CONFIG_NETCONSOLE=m
-CONFIG_NETCONSOLE_DYNAMIC=y
-CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_MOUSE_PS2=m
-CONFIG_MOUSE_SERIAL=m
-CONFIG_SERIO=m
-# CONFIG_SERIO_SERPORT is not set
-CONFIG_VT_HW_CONSOLE_BINDING=y
-# CONFIG_DEVKMEM is not set
-# CONFIG_HW_RANDOM is not set
-CONFIG_GEN_RTC=m
-CONFIG_GEN_RTC_X=y
-# CONFIG_HWMON is not set
-CONFIG_FB=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_VGA16 is not set
-# CONFIG_LOGO_LINUX_CLUT224 is not set
-CONFIG_HID=m
-CONFIG_HIDRAW=y
-# CONFIG_USB_SUPPORT is not set
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_REISERFS_FS=m
-CONFIG_JFS_FS=m
-CONFIG_XFS_FS=m
-CONFIG_OCFS2_FS=m
-# CONFIG_OCFS2_FS_STATS is not set
-# CONFIG_OCFS2_DEBUG_MASKLOG is not set
-CONFIG_QUOTA_NETLINK_INTERFACE=y
-# CONFIG_PRINT_QUOTA_WARNING is not set
-CONFIG_AUTOFS_FS=m
-CONFIG_AUTOFS4_FS=m
-CONFIG_FUSE_FS=m
-CONFIG_ISO9660_FS=y
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_UDF_FS=m
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=m
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_AFFS_FS=m
-CONFIG_HFS_FS=m
-CONFIG_HFSPLUS_FS=m
-CONFIG_CRAMFS=m
-CONFIG_SQUASHFS=m
-CONFIG_MINIX_FS=y
-CONFIG_HPFS_FS=m
-CONFIG_SYSV_FS=m
-CONFIG_UFS_FS=m
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
-CONFIG_SMB_FS=m
-CONFIG_SMB_NLS_DEFAULT=y
-CONFIG_CODA_FS=m
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
-CONFIG_DLM=m
-CONFIG_MAGIC_SYSRQ=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_CCM=m
-CONFIG_CRYPTO_GCM=m
-CONFIG_CRYPTO_CTS=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_XTS=m
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_RMD128=m
-CONFIG_CRYPTO_RMD160=m
-CONFIG_CRYPTO_RMD256=m
-CONFIG_CRYPTO_RMD320=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_CAMELLIA=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_SALSA20=m
-CONFIG_CRYPTO_SEED=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_ZLIB=m
-CONFIG_CRYPTO_LZO=m
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_HW is not set
-CONFIG_CRC16=m
-CONFIG_CRC_T10DIF=y
diff --git a/ANDROID_3.4.5/arch/m68k/configs/atari_defconfig b/ANDROID_3.4.5/arch/m68k/configs/atari_defconfig
deleted file mode 100644
index 15133251..00000000
--- a/ANDROID_3.4.5/arch/m68k/configs/atari_defconfig
+++ /dev/null
@@ -1,359 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_LOCALVERSION="-atari"
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_RELAY=y
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_ATARI=y
-CONFIG_M68020=y
-CONFIG_M68030=y
-CONFIG_M68040=y
-CONFIG_M68060=y
-CONFIG_BINFMT_AOUT=m
-CONFIG_BINFMT_MISC=m
-CONFIG_STRAM_PROC=y
-CONFIG_HEARTBEAT=y
-CONFIG_PROC_HARDWARE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_NET_KEY_MIGRATE=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_NET_IPIP=m
-CONFIG_NET_IPGRE=m
-CONFIG_SYN_COOKIES=y
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-CONFIG_INET_IPCOMP=m
-CONFIG_INET_XFRM_MODE_TRANSPORT=m
-CONFIG_INET_XFRM_MODE_TUNNEL=m
-CONFIG_INET_XFRM_MODE_BEET=m
-CONFIG_INET_DIAG=m
-CONFIG_IPV6_PRIVACY=y
-CONFIG_IPV6_ROUTER_PREF=y
-CONFIG_IPV6_ROUTE_INFO=y
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
-CONFIG_IPV6_TUNNEL=m
-CONFIG_NETFILTER=y
-CONFIG_NETFILTER_NETLINK_QUEUE=m
-CONFIG_NF_CONNTRACK=m
-# CONFIG_NF_CT_PROTO_DCCP is not set
-CONFIG_NF_CT_PROTO_UDPLITE=m
-CONFIG_NF_CONNTRACK_AMANDA=m
-CONFIG_NF_CONNTRACK_FTP=m
-CONFIG_NF_CONNTRACK_H323=m
-CONFIG_NF_CONNTRACK_IRC=m
-CONFIG_NF_CONNTRACK_NETBIOS_NS=m
-CONFIG_NF_CONNTRACK_PPTP=m
-CONFIG_NF_CONNTRACK_SANE=m
-CONFIG_NF_CONNTRACK_SIP=m
-CONFIG_NF_CONNTRACK_TFTP=m
-CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
-CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
-CONFIG_NETFILTER_XT_TARGET_DSCP=m
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFLOG=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
-CONFIG_NETFILTER_XT_TARGET_TRACE=m
-CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
-CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
-CONFIG_NETFILTER_XT_MATCH_COMMENT=m
-CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
-CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
-CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_DSCP=m
-CONFIG_NETFILTER_XT_MATCH_ESP=m
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
-CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
-CONFIG_NETFILTER_XT_MATCH_OWNER=m
-CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
-CONFIG_NETFILTER_XT_MATCH_QUOTA=m
-CONFIG_NETFILTER_XT_MATCH_RATEEST=m
-CONFIG_NETFILTER_XT_MATCH_REALM=m
-CONFIG_NETFILTER_XT_MATCH_RECENT=m
-CONFIG_NETFILTER_XT_MATCH_STATE=m
-CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
-CONFIG_NETFILTER_XT_MATCH_STRING=m
-CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_TIME=m
-CONFIG_NETFILTER_XT_MATCH_U32=m
-CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_AH=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_NF_NAT=m
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-CONFIG_NF_CONNTRACK_IPV6=m
-CONFIG_IP6_NF_QUEUE=m
-CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_AH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_MATCH_FRAG=m
-CONFIG_IP6_NF_MATCH_OPTS=m
-CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_MH=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_TARGET_HL=m
-CONFIG_IP6_NF_TARGET_LOG=m
-CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_TARGET_REJECT=m
-CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_RAW=m
-CONFIG_IP_DCCP=m
-# CONFIG_IP_DCCP_CCID3 is not set
-CONFIG_ATALK=m
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_CONNECTOR=m
-CONFIG_PARPORT=m
-CONFIG_PARPORT_ATARI=m
-CONFIG_PARPORT_1284=y
-CONFIG_ATARI_FLOPPY=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_ATA_OVER_ETH=m
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDECD=y
-CONFIG_BLK_DEV_FALCON_IDE=y
-CONFIG_RAID_ATTRS=m
-CONFIG_SCSI=y
-CONFIG_SCSI_TGT=m
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=m
-CONFIG_CHR_DEV_OSST=m
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=m
-CONFIG_SCSI_CONSTANTS=y
-CONFIG_SCSI_SAS_LIBSAS=m
-# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
-CONFIG_SCSI_SRP_ATTRS=m
-CONFIG_SCSI_SRP_TGT_ATTRS=y
-CONFIG_ISCSI_TCP=m
-CONFIG_ATARI_SCSI=y
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-CONFIG_MD_RAID456=m
-CONFIG_BLK_DEV_DM=m
-CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
-CONFIG_DM_MULTIPATH=m
-CONFIG_DM_UEVENT=y
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=m
-CONFIG_MACVLAN=m
-CONFIG_EQUALIZER=m
-CONFIG_VETH=m
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-CONFIG_ATARILANCE=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-CONFIG_PPP=m
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_MPPE=m
-CONFIG_PPPOE=m
-CONFIG_SLIP=m
-CONFIG_SLIP_COMPRESSED=y
-CONFIG_SLIP_SMART=y
-CONFIG_SLIP_MODE_SLIP6=y
-CONFIG_NETCONSOLE=m
-CONFIG_NETCONSOLE_DYNAMIC=y
-CONFIG_INPUT_FF_MEMLESS=m
-CONFIG_KEYBOARD_ATARI=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_MOUSE_PS2=m
-CONFIG_MOUSE_ATARI=m
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_M68K_BEEP=m
-# CONFIG_SERIO_SERPORT is not set
-CONFIG_VT_HW_CONSOLE_BINDING=y
-# CONFIG_DEVKMEM is not set
-CONFIG_PRINTER=m
-# CONFIG_HW_RANDOM is not set
-CONFIG_GEN_RTC=m
-CONFIG_GEN_RTC_X=y
-# CONFIG_HWMON is not set
-CONFIG_FB=y
-CONFIG_FB_ATARI=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-CONFIG_SOUND=m
-CONFIG_DMASOUND_ATARI=m
-CONFIG_HID=m
-CONFIG_HIDRAW=y
-# CONFIG_USB_SUPPORT is not set
-CONFIG_ATARI_DSP56K=m
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_REISERFS_FS=m
-CONFIG_JFS_FS=m
-CONFIG_XFS_FS=m
-CONFIG_OCFS2_FS=m
-# CONFIG_OCFS2_FS_STATS is not set
-# CONFIG_OCFS2_DEBUG_MASKLOG is not set
-CONFIG_QUOTA_NETLINK_INTERFACE=y
-# CONFIG_PRINT_QUOTA_WARNING is not set
-CONFIG_AUTOFS_FS=m
-CONFIG_AUTOFS4_FS=m
-CONFIG_FUSE_FS=m
-CONFIG_ISO9660_FS=y
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_UDF_FS=m
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=m
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_AFFS_FS=m
-CONFIG_HFS_FS=m
-CONFIG_HFSPLUS_FS=m
-CONFIG_CRAMFS=m
-CONFIG_SQUASHFS=m
-CONFIG_MINIX_FS=y
-CONFIG_HPFS_FS=m
-CONFIG_SYSV_FS=m
-CONFIG_UFS_FS=m
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
-CONFIG_SMB_FS=m
-CONFIG_SMB_NLS_DEFAULT=y
-CONFIG_CODA_FS=m
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
-CONFIG_DLM=m
-CONFIG_MAGIC_SYSRQ=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_CCM=m
-CONFIG_CRYPTO_GCM=m
-CONFIG_CRYPTO_CTS=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_XTS=m
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_RMD128=m
-CONFIG_CRYPTO_RMD160=m
-CONFIG_CRYPTO_RMD256=m
-CONFIG_CRYPTO_RMD320=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_CAMELLIA=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_SALSA20=m
-CONFIG_CRYPTO_SEED=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_ZLIB=m
-CONFIG_CRYPTO_LZO=m
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_HW is not set
-CONFIG_CRC16=y
-CONFIG_CRC_T10DIF=y
diff --git a/ANDROID_3.4.5/arch/m68k/configs/bvme6000_defconfig b/ANDROID_3.4.5/arch/m68k/configs/bvme6000_defconfig
deleted file mode 100644
index 67bb6fc1..00000000
--- a/ANDROID_3.4.5/arch/m68k/configs/bvme6000_defconfig
+++ /dev/null
@@ -1,343 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_LOCALVERSION="-bvme6000"
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_RELAY=y
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_VME=y
-CONFIG_BVME6000=y
-CONFIG_M68040=y
-CONFIG_M68060=y
-CONFIG_BINFMT_AOUT=m
-CONFIG_BINFMT_MISC=m
-CONFIG_PROC_HARDWARE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_NET_KEY_MIGRATE=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-CONFIG_NET_IPIP=m
-CONFIG_NET_IPGRE=m
-CONFIG_SYN_COOKIES=y
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-CONFIG_INET_IPCOMP=m
-CONFIG_INET_XFRM_MODE_TRANSPORT=m
-CONFIG_INET_XFRM_MODE_TUNNEL=m
-CONFIG_INET_XFRM_MODE_BEET=m
-CONFIG_INET_DIAG=m
-CONFIG_IPV6_PRIVACY=y
-CONFIG_IPV6_ROUTER_PREF=y
-CONFIG_IPV6_ROUTE_INFO=y
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
-CONFIG_IPV6_TUNNEL=m
-CONFIG_NETFILTER=y
-CONFIG_NETFILTER_NETLINK_QUEUE=m
-CONFIG_NF_CONNTRACK=m
-# CONFIG_NF_CT_PROTO_DCCP is not set
-CONFIG_NF_CT_PROTO_UDPLITE=m
-CONFIG_NF_CONNTRACK_AMANDA=m
-CONFIG_NF_CONNTRACK_FTP=m
-CONFIG_NF_CONNTRACK_H323=m
-CONFIG_NF_CONNTRACK_IRC=m
-CONFIG_NF_CONNTRACK_NETBIOS_NS=m
-CONFIG_NF_CONNTRACK_PPTP=m
-CONFIG_NF_CONNTRACK_SANE=m
-CONFIG_NF_CONNTRACK_SIP=m
-CONFIG_NF_CONNTRACK_TFTP=m
-CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
-CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
-CONFIG_NETFILTER_XT_TARGET_DSCP=m
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFLOG=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
-CONFIG_NETFILTER_XT_TARGET_TRACE=m
-CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
-CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
-CONFIG_NETFILTER_XT_MATCH_COMMENT=m
-CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
-CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
-CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_DSCP=m
-CONFIG_NETFILTER_XT_MATCH_ESP=m
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
-CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
-CONFIG_NETFILTER_XT_MATCH_OWNER=m
-CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
-CONFIG_NETFILTER_XT_MATCH_QUOTA=m
-CONFIG_NETFILTER_XT_MATCH_RATEEST=m
-CONFIG_NETFILTER_XT_MATCH_REALM=m
-CONFIG_NETFILTER_XT_MATCH_RECENT=m
-CONFIG_NETFILTER_XT_MATCH_STATE=m
-CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
-CONFIG_NETFILTER_XT_MATCH_STRING=m
-CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_TIME=m
-CONFIG_NETFILTER_XT_MATCH_U32=m
-CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_AH=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_NF_NAT=m
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-CONFIG_NF_CONNTRACK_IPV6=m
-CONFIG_IP6_NF_QUEUE=m
-CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_AH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_MATCH_FRAG=m
-CONFIG_IP6_NF_MATCH_OPTS=m
-CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_MH=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_TARGET_HL=m
-CONFIG_IP6_NF_TARGET_LOG=m
-CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_TARGET_REJECT=m
-CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_RAW=m
-CONFIG_IP_DCCP=m
-# CONFIG_IP_DCCP_CCID3 is not set
-CONFIG_ATALK=m
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_CONNECTOR=m
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_ATA_OVER_ETH=m
-CONFIG_RAID_ATTRS=m
-CONFIG_SCSI=y
-CONFIG_SCSI_TGT=m
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=m
-CONFIG_CHR_DEV_OSST=m
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=m
-CONFIG_SCSI_CONSTANTS=y
-CONFIG_SCSI_SAS_LIBSAS=m
-# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
-CONFIG_SCSI_SRP_ATTRS=m
-CONFIG_SCSI_SRP_TGT_ATTRS=y
-CONFIG_ISCSI_TCP=m
-CONFIG_BVME6000_SCSI=y
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-CONFIG_MD_RAID456=m
-CONFIG_BLK_DEV_DM=m
-CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
-CONFIG_DM_MULTIPATH=m
-CONFIG_DM_UEVENT=y
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=m
-CONFIG_MACVLAN=m
-CONFIG_EQUALIZER=m
-CONFIG_VETH=m
-CONFIG_NET_ETHERNET=y
-CONFIG_BVME6000_NET=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-CONFIG_PPP=m
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_MPPE=m
-CONFIG_PPPOE=m
-CONFIG_SLIP=m
-CONFIG_SLIP_COMPRESSED=y
-CONFIG_SLIP_SMART=y
-CONFIG_SLIP_MODE_SLIP6=y
-CONFIG_NETCONSOLE=m
-CONFIG_NETCONSOLE_DYNAMIC=y
-CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_MOUSE_PS2=m
-CONFIG_MOUSE_SERIAL=m
-CONFIG_SERIO=m
-# CONFIG_SERIO_SERPORT is not set
-CONFIG_VT_HW_CONSOLE_BINDING=y
-# CONFIG_DEVKMEM is not set
-# CONFIG_HW_RANDOM is not set
-CONFIG_GEN_RTC=m
-CONFIG_GEN_RTC_X=y
-# CONFIG_HWMON is not set
-CONFIG_HID=m
-CONFIG_HIDRAW=y
-# CONFIG_USB_SUPPORT is not set
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_REISERFS_FS=m
-CONFIG_JFS_FS=m
-CONFIG_XFS_FS=m
-CONFIG_OCFS2_FS=m
-# CONFIG_OCFS2_FS_STATS is not set
-# CONFIG_OCFS2_DEBUG_MASKLOG is not set
-CONFIG_QUOTA_NETLINK_INTERFACE=y
-# CONFIG_PRINT_QUOTA_WARNING is not set
-CONFIG_AUTOFS_FS=m
-CONFIG_AUTOFS4_FS=m
-CONFIG_FUSE_FS=m
-CONFIG_ISO9660_FS=y
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_UDF_FS=m
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=m
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_AFFS_FS=m
-CONFIG_HFS_FS=m
-CONFIG_HFSPLUS_FS=m
-CONFIG_CRAMFS=m
-CONFIG_SQUASHFS=m
-CONFIG_MINIX_FS=y
-CONFIG_HPFS_FS=m
-CONFIG_SYSV_FS=m
-CONFIG_UFS_FS=m
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
-CONFIG_SMB_FS=m
-CONFIG_SMB_NLS_DEFAULT=y
-CONFIG_CODA_FS=m
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
-CONFIG_DLM=m
-CONFIG_MAGIC_SYSRQ=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_CCM=m
-CONFIG_CRYPTO_GCM=m
-CONFIG_CRYPTO_CTS=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_XTS=m
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_RMD128=m
-CONFIG_CRYPTO_RMD160=m
-CONFIG_CRYPTO_RMD256=m
-CONFIG_CRYPTO_RMD320=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_CAMELLIA=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_SALSA20=m
-CONFIG_CRYPTO_SEED=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_ZLIB=m
-CONFIG_CRYPTO_LZO=m
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_HW is not set
-CONFIG_CRC16=m
-CONFIG_CRC_T10DIF=y
-CONFIG_CRC32=m
diff --git a/ANDROID_3.4.5/arch/m68k/configs/hp300_defconfig b/ANDROID_3.4.5/arch/m68k/configs/hp300_defconfig
deleted file mode 100644
index 3e35ce5f..00000000
--- a/ANDROID_3.4.5/arch/m68k/configs/hp300_defconfig
+++ /dev/null
@@ -1,348 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_LOCALVERSION="-hp300"
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_RELAY=y
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_HP300=y
-CONFIG_M68020=y
-CONFIG_M68030=y
-CONFIG_M68040=y
-CONFIG_M68060=y
-CONFIG_BINFMT_AOUT=m
-CONFIG_BINFMT_MISC=m
-CONFIG_PROC_HARDWARE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_NET_KEY_MIGRATE=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-CONFIG_NET_IPIP=m
-CONFIG_NET_IPGRE=m
-CONFIG_SYN_COOKIES=y
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-CONFIG_INET_IPCOMP=m
-CONFIG_INET_XFRM_MODE_TRANSPORT=m
-CONFIG_INET_XFRM_MODE_TUNNEL=m
-CONFIG_INET_XFRM_MODE_BEET=m
-CONFIG_INET_DIAG=m
-CONFIG_IPV6_PRIVACY=y
-CONFIG_IPV6_ROUTER_PREF=y
-CONFIG_IPV6_ROUTE_INFO=y
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
-CONFIG_IPV6_TUNNEL=m
-CONFIG_NETFILTER=y
-CONFIG_NETFILTER_NETLINK_QUEUE=m
-CONFIG_NF_CONNTRACK=m
-# CONFIG_NF_CT_PROTO_DCCP is not set
-CONFIG_NF_CT_PROTO_UDPLITE=m
-CONFIG_NF_CONNTRACK_AMANDA=m
-CONFIG_NF_CONNTRACK_FTP=m
-CONFIG_NF_CONNTRACK_H323=m
-CONFIG_NF_CONNTRACK_IRC=m
-CONFIG_NF_CONNTRACK_NETBIOS_NS=m
-CONFIG_NF_CONNTRACK_PPTP=m
-CONFIG_NF_CONNTRACK_SANE=m
-CONFIG_NF_CONNTRACK_SIP=m
-CONFIG_NF_CONNTRACK_TFTP=m
-CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
-CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
-CONFIG_NETFILTER_XT_TARGET_DSCP=m
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFLOG=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
-CONFIG_NETFILTER_XT_TARGET_TRACE=m
-CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
-CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
-CONFIG_NETFILTER_XT_MATCH_COMMENT=m
-CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
-CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
-CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_DSCP=m
-CONFIG_NETFILTER_XT_MATCH_ESP=m
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
-CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
-CONFIG_NETFILTER_XT_MATCH_OWNER=m
-CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
-CONFIG_NETFILTER_XT_MATCH_QUOTA=m
-CONFIG_NETFILTER_XT_MATCH_RATEEST=m
-CONFIG_NETFILTER_XT_MATCH_REALM=m
-CONFIG_NETFILTER_XT_MATCH_RECENT=m
-CONFIG_NETFILTER_XT_MATCH_STATE=m
-CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
-CONFIG_NETFILTER_XT_MATCH_STRING=m
-CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_TIME=m
-CONFIG_NETFILTER_XT_MATCH_U32=m
-CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_AH=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_NF_NAT=m
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-CONFIG_NF_CONNTRACK_IPV6=m
-CONFIG_IP6_NF_QUEUE=m
-CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_AH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_MATCH_FRAG=m
-CONFIG_IP6_NF_MATCH_OPTS=m
-CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_MH=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_TARGET_HL=m
-CONFIG_IP6_NF_TARGET_LOG=m
-CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_TARGET_REJECT=m
-CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_RAW=m
-CONFIG_IP_DCCP=m
-# CONFIG_IP_DCCP_CCID3 is not set
-CONFIG_ATALK=m
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_CONNECTOR=m
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_ATA_OVER_ETH=m
-CONFIG_RAID_ATTRS=m
-CONFIG_SCSI=y
-CONFIG_SCSI_TGT=m
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=m
-CONFIG_CHR_DEV_OSST=m
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=m
-CONFIG_SCSI_CONSTANTS=y
-CONFIG_SCSI_SAS_LIBSAS=m
-# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
-CONFIG_SCSI_SRP_ATTRS=m
-CONFIG_SCSI_SRP_TGT_ATTRS=y
-CONFIG_ISCSI_TCP=m
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-CONFIG_MD_RAID456=m
-CONFIG_BLK_DEV_DM=m
-CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
-CONFIG_DM_MULTIPATH=m
-CONFIG_DM_UEVENT=y
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=m
-CONFIG_MACVLAN=m
-CONFIG_EQUALIZER=m
-CONFIG_VETH=m
-CONFIG_NET_ETHERNET=y
-CONFIG_HPLANCE=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-CONFIG_PPP=m
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_MPPE=m
-CONFIG_PPPOE=m
-CONFIG_SLIP=m
-CONFIG_SLIP_COMPRESSED=y
-CONFIG_SLIP_SMART=y
-CONFIG_SLIP_MODE_SLIP6=y
-CONFIG_NETCONSOLE=m
-CONFIG_NETCONSOLE_DYNAMIC=y
-CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_MOUSE_PS2=m
-CONFIG_MOUSE_SERIAL=m
-CONFIG_INPUT_MISC=y
-CONFIG_HP_SDC_RTC=m
-# CONFIG_SERIO_SERPORT is not set
-CONFIG_VT_HW_CONSOLE_BINDING=y
-# CONFIG_DEVKMEM is not set
-# CONFIG_HW_RANDOM is not set
-CONFIG_GEN_RTC=m
-CONFIG_GEN_RTC_X=y
-# CONFIG_HWMON is not set
-CONFIG_FB=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_HID=m
-CONFIG_HIDRAW=y
-# CONFIG_USB_SUPPORT is not set
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_REISERFS_FS=m
-CONFIG_JFS_FS=m
-CONFIG_XFS_FS=m
-CONFIG_OCFS2_FS=m
-# CONFIG_OCFS2_FS_STATS is not set
-# CONFIG_OCFS2_DEBUG_MASKLOG is not set
-CONFIG_QUOTA_NETLINK_INTERFACE=y
-# CONFIG_PRINT_QUOTA_WARNING is not set
-CONFIG_AUTOFS_FS=m
-CONFIG_AUTOFS4_FS=m
-CONFIG_FUSE_FS=m
-CONFIG_ISO9660_FS=y
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_UDF_FS=m
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=m
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_AFFS_FS=m
-CONFIG_HFS_FS=m
-CONFIG_HFSPLUS_FS=m
-CONFIG_CRAMFS=m
-CONFIG_SQUASHFS=m
-CONFIG_MINIX_FS=y
-CONFIG_HPFS_FS=m
-CONFIG_SYSV_FS=m
-CONFIG_UFS_FS=m
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
-CONFIG_SMB_FS=m
-CONFIG_SMB_NLS_DEFAULT=y
-CONFIG_CODA_FS=m
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
-CONFIG_DLM=m
-CONFIG_MAGIC_SYSRQ=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_CCM=m
-CONFIG_CRYPTO_GCM=m
-CONFIG_CRYPTO_CTS=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_XTS=m
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_RMD128=m
-CONFIG_CRYPTO_RMD160=m
-CONFIG_CRYPTO_RMD256=m
-CONFIG_CRYPTO_RMD320=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_CAMELLIA=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_SALSA20=m
-CONFIG_CRYPTO_SEED=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_ZLIB=m
-CONFIG_CRYPTO_LZO=m
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_HW is not set
-CONFIG_CRC16=m
-CONFIG_CRC_T10DIF=y
diff --git a/ANDROID_3.4.5/arch/m68k/configs/m5208evb_defconfig b/ANDROID_3.4.5/arch/m68k/configs/m5208evb_defconfig
deleted file mode 100644
index c1616824..00000000
--- a/ANDROID_3.4.5/arch/m68k/configs/m5208evb_defconfig
+++ /dev/null
@@ -1,76 +0,0 @@
-# CONFIG_MMU is not set
-CONFIG_EXPERIMENTAL=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EXPERT=y
-# CONFIG_KALLSYMS is not set
-# CONFIG_HOTPLUG is not set
-# CONFIG_FUTEX is not set
-# CONFIG_EPOLL is not set
-# CONFIG_SIGNALFD is not set
-# CONFIG_TIMERFD is not set
-# CONFIG_EVENTFD is not set
-# CONFIG_AIO is not set
-# CONFIG_VM_EVENT_COUNTERS is not set
-# CONFIG_COMPAT_BRK is not set
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_M520x=y
-CONFIG_CLOCK_SET=y
-CONFIG_CLOCK_FREQ=166666666
-CONFIG_CLOCK_DIV=2
-CONFIG_M5208EVB=y
-# CONFIG_4KSTACKS is not set
-CONFIG_RAMBASE=0x40000000
-CONFIG_RAMSIZE=0x2000000
-CONFIG_VECTORBASE=0x40000000
-CONFIG_KERNELBASE=0x40020000
-CONFIG_RAM16BIT=y
-CONFIG_BINFMT_FLAT=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_FW_LOADER is not set
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_RAM=y
-CONFIG_MTD_UCLINUX=y
-CONFIG_BLK_DEV_RAM=y
-# CONFIG_MISC_DEVICES is not set
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_FEC=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_INPUT is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_MCF=y
-CONFIG_SERIAL_MCF_BAUDRATE=115200
-CONFIG_SERIAL_MCF_CONSOLE=y
-# CONFIG_UNIX98_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_EXT2_FS=y
-# CONFIG_FILE_LOCKING is not set
-# CONFIG_DNOTIFY is not set
-# CONFIG_SYSFS is not set
-CONFIG_ROMFS_FS=y
-CONFIG_ROMFS_BACKED_BY_MTD=y
-# CONFIG_NETWORK_FILESYSTEMS is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_FULLDEBUG=y
-CONFIG_BOOTPARAM=y
-CONFIG_BOOTPARAM_STRING="root=/dev/mtdblock0"
diff --git a/ANDROID_3.4.5/arch/m68k/configs/m5249evb_defconfig b/ANDROID_3.4.5/arch/m68k/configs/m5249evb_defconfig
deleted file mode 100644
index a6599e42..00000000
--- a/ANDROID_3.4.5/arch/m68k/configs/m5249evb_defconfig
+++ /dev/null
@@ -1,69 +0,0 @@
-# CONFIG_MMU is not set
-CONFIG_EXPERIMENTAL=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EXPERT=y
-# CONFIG_KALLSYMS is not set
-# CONFIG_HOTPLUG is not set
-# CONFIG_FUTEX is not set
-# CONFIG_EPOLL is not set
-# CONFIG_SIGNALFD is not set
-# CONFIG_TIMERFD is not set
-# CONFIG_EVENTFD is not set
-# CONFIG_AIO is not set
-# CONFIG_VM_EVENT_COUNTERS is not set
-# CONFIG_SLUB_DEBUG is not set
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_M5249=y
-CONFIG_CLOCK_SET=y
-CONFIG_CLOCK_FREQ=140000000
-CONFIG_CLOCK_DIV=2
-CONFIG_M5249C3=y
-CONFIG_RAMBASE=0x00000000
-CONFIG_RAMSIZE=0x00800000
-CONFIG_VECTORBASE=0x00000000
-CONFIG_KERNELBASE=0x00020000
-CONFIG_BINFMT_FLAT=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_FW_LOADER is not set
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_RAM=y
-CONFIG_MTD_UCLINUX=y
-CONFIG_BLK_DEV_RAM=y
-# CONFIG_MISC_DEVICES is not set
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-CONFIG_PPP=y
-# CONFIG_INPUT is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_MCF=y
-CONFIG_SERIAL_MCF_CONSOLE=y
-# CONFIG_UNIX98_PTYS is not set
-# CONFIG_HWMON is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_EXT2_FS=y
-# CONFIG_FILE_LOCKING is not set
-CONFIG_ROMFS_FS=y
-CONFIG_ROMFS_BACKED_BY_MTD=y
-# CONFIG_NETWORK_FILESYSTEMS is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_BOOTPARAM=y
-CONFIG_BOOTPARAM_STRING="root=/dev/mtdblock0"
-# CONFIG_CRC32 is not set
diff --git a/ANDROID_3.4.5/arch/m68k/configs/m5272c3_defconfig b/ANDROID_3.4.5/arch/m68k/configs/m5272c3_defconfig
deleted file mode 100644
index 3fa60a57..00000000
--- a/ANDROID_3.4.5/arch/m68k/configs/m5272c3_defconfig
+++ /dev/null
@@ -1,67 +0,0 @@
-# CONFIG_MMU is not set
-CONFIG_EXPERIMENTAL=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EXPERT=y
-# CONFIG_KALLSYMS is not set
-# CONFIG_HOTPLUG is not set
-# CONFIG_FUTEX is not set
-# CONFIG_EPOLL is not set
-# CONFIG_SIGNALFD is not set
-# CONFIG_TIMERFD is not set
-# CONFIG_EVENTFD is not set
-# CONFIG_AIO is not set
-# CONFIG_VM_EVENT_COUNTERS is not set
-# CONFIG_SLUB_DEBUG is not set
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_M5272=y
-CONFIG_CLOCK_SET=y
-CONFIG_M5272C3=y
-CONFIG_RAMBASE=0x00000000
-CONFIG_RAMSIZE=0x00800000
-CONFIG_VECTORBASE=0x00000000
-CONFIG_KERNELBASE=0x00020000
-CONFIG_BINFMT_FLAT=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_FW_LOADER is not set
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_RAM=y
-CONFIG_MTD_UCLINUX=y
-CONFIG_BLK_DEV_RAM=y
-# CONFIG_MISC_DEVICES is not set
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_FEC=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_INPUT is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_MCF=y
-CONFIG_SERIAL_MCF_CONSOLE=y
-# CONFIG_UNIX98_PTYS is not set
-# CONFIG_HWMON is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_EXT2_FS=y
-# CONFIG_FILE_LOCKING is not set
-# CONFIG_DNOTIFY is not set
-CONFIG_ROMFS_FS=y
-CONFIG_ROMFS_BACKED_BY_MTD=y
-# CONFIG_NETWORK_FILESYSTEMS is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_BOOTPARAM=y
-CONFIG_BOOTPARAM_STRING="root=/dev/mtdblock0"
diff --git a/ANDROID_3.4.5/arch/m68k/configs/m5275evb_defconfig b/ANDROID_3.4.5/arch/m68k/configs/m5275evb_defconfig
deleted file mode 100644
index a1230e82..00000000
--- a/ANDROID_3.4.5/arch/m68k/configs/m5275evb_defconfig
+++ /dev/null
@@ -1,73 +0,0 @@
-# CONFIG_MMU is not set
-CONFIG_EXPERIMENTAL=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EXPERT=y
-# CONFIG_KALLSYMS is not set
-# CONFIG_HOTPLUG is not set
-# CONFIG_FUTEX is not set
-# CONFIG_EPOLL is not set
-# CONFIG_SIGNALFD is not set
-# CONFIG_TIMERFD is not set
-# CONFIG_EVENTFD is not set
-# CONFIG_AIO is not set
-# CONFIG_VM_EVENT_COUNTERS is not set
-# CONFIG_SLUB_DEBUG is not set
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_M5275=y
-CONFIG_CLOCK_SET=y
-CONFIG_CLOCK_FREQ=150000000
-CONFIG_CLOCK_DIV=2
-CONFIG_M5275EVB=y
-# CONFIG_4KSTACKS is not set
-CONFIG_RAMBASE=0x00000000
-CONFIG_RAMSIZE=0x00000000
-CONFIG_VECTORBASE=0x00000000
-CONFIG_KERNELBASE=0x00020000
-CONFIG_BINFMT_FLAT=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_FW_LOADER is not set
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_RAM=y
-CONFIG_MTD_UCLINUX=y
-CONFIG_BLK_DEV_RAM=y
-# CONFIG_MISC_DEVICES is not set
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_FEC=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-CONFIG_PPP=y
-# CONFIG_INPUT is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_MCF=y
-CONFIG_SERIAL_MCF_CONSOLE=y
-# CONFIG_UNIX98_PTYS is not set
-# CONFIG_HWMON is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_EXT2_FS=y
-# CONFIG_FILE_LOCKING is not set
-# CONFIG_DNOTIFY is not set
-CONFIG_ROMFS_FS=y
-CONFIG_ROMFS_BACKED_BY_MTD=y
-# CONFIG_NETWORK_FILESYSTEMS is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_BOOTPARAM=y
-CONFIG_BOOTPARAM_STRING="root=/dev/mtdblock0"
-# CONFIG_CRC32 is not set
diff --git a/ANDROID_3.4.5/arch/m68k/configs/m5307c3_defconfig b/ANDROID_3.4.5/arch/m68k/configs/m5307c3_defconfig
deleted file mode 100644
index 43795f41..00000000
--- a/ANDROID_3.4.5/arch/m68k/configs/m5307c3_defconfig
+++ /dev/null
@@ -1,77 +0,0 @@
-# CONFIG_MMU is not set
-CONFIG_EXPERIMENTAL=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EXPERT=y
-# CONFIG_KALLSYMS is not set
-# CONFIG_HOTPLUG is not set
-# CONFIG_FUTEX is not set
-# CONFIG_EPOLL is not set
-# CONFIG_SIGNALFD is not set
-# CONFIG_TIMERFD is not set
-# CONFIG_EVENTFD is not set
-# CONFIG_AIO is not set
-# CONFIG_VM_EVENT_COUNTERS is not set
-# CONFIG_SLUB_DEBUG is not set
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_M5307=y
-CONFIG_CLOCK_SET=y
-CONFIG_CLOCK_FREQ=90000000
-CONFIG_CLOCK_DIV=2
-CONFIG_M5307C3=y
-CONFIG_RAMBASE=0x00000000
-CONFIG_RAMSIZE=0x00800000
-CONFIG_VECTORBASE=0x00000000
-CONFIG_KERNELBASE=0x00020000
-CONFIG_BINFMT_FLAT=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_FW_LOADER is not set
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_RAM=y
-CONFIG_MTD_UCLINUX=y
-CONFIG_BLK_DEV_RAM=y
-# CONFIG_MISC_DEVICES is not set
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-CONFIG_PPP=y
-CONFIG_SLIP=y
-CONFIG_SLIP_COMPRESSED=y
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_MCF=y
-CONFIG_SERIAL_MCF_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_EXT2_FS=y
-# CONFIG_DNOTIFY is not set
-CONFIG_ROMFS_FS=y
-CONFIG_ROMFS_BACKED_BY_MTD=y
-# CONFIG_NETWORK_FILESYSTEMS is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_FULLDEBUG=y
-CONFIG_BOOTPARAM=y
-CONFIG_BOOTPARAM_STRING="root=/dev/mtdblock0"
-# CONFIG_CRC32 is not set
diff --git a/ANDROID_3.4.5/arch/m68k/configs/m5407c3_defconfig b/ANDROID_3.4.5/arch/m68k/configs/m5407c3_defconfig
deleted file mode 100644
index 72746c57..00000000
--- a/ANDROID_3.4.5/arch/m68k/configs/m5407c3_defconfig
+++ /dev/null
@@ -1,71 +0,0 @@
-# CONFIG_MMU is not set
-CONFIG_EXPERIMENTAL=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EXPERT=y
-# CONFIG_KALLSYMS is not set
-# CONFIG_HOTPLUG is not set
-# CONFIG_FUTEX is not set
-# CONFIG_EPOLL is not set
-# CONFIG_SIGNALFD is not set
-# CONFIG_TIMERFD is not set
-# CONFIG_EVENTFD is not set
-# CONFIG_AIO is not set
-# CONFIG_VM_EVENT_COUNTERS is not set
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_M5407=y
-CONFIG_CLOCK_SET=y
-CONFIG_CLOCK_FREQ=50000000
-CONFIG_M5407C3=y
-CONFIG_RAMBASE=0x00000000
-CONFIG_RAMSIZE=0x00000000
-CONFIG_VECTORBASE=0x00000000
-CONFIG_KERNELBASE=0x00020000
-CONFIG_BINFMT_FLAT=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_FW_LOADER is not set
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_RAM=y
-CONFIG_MTD_UCLINUX=y
-CONFIG_BLK_DEV_RAM=y
-# CONFIG_MISC_DEVICES is not set
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-CONFIG_PPP=y
-# CONFIG_INPUT is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_MCF=y
-CONFIG_SERIAL_MCF_CONSOLE=y
-# CONFIG_UNIX98_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_EXT2_FS=y
-# CONFIG_FILE_LOCKING is not set
-# CONFIG_DNOTIFY is not set
-CONFIG_ROMFS_FS=y
-CONFIG_ROMFS_BACKED_BY_MTD=y
-# CONFIG_NETWORK_FILESYSTEMS is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_BOOTPARAM=y
-CONFIG_BOOTPARAM_STRING="root=/dev/mtdblock0"
-# CONFIG_CRC32 is not set
diff --git a/ANDROID_3.4.5/arch/m68k/configs/mac_defconfig b/ANDROID_3.4.5/arch/m68k/configs/mac_defconfig
deleted file mode 100644
index ae81e2d1..00000000
--- a/ANDROID_3.4.5/arch/m68k/configs/mac_defconfig
+++ /dev/null
@@ -1,367 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_LOCALVERSION="-mac"
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_RELAY=y
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MAC=y
-CONFIG_M68020=y
-CONFIG_M68030=y
-CONFIG_M68040=y
-CONFIG_BINFMT_AOUT=m
-CONFIG_BINFMT_MISC=m
-CONFIG_PROC_HARDWARE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_NET_KEY_MIGRATE=y
-CONFIG_INET=y
-CONFIG_NET_IPIP=m
-CONFIG_NET_IPGRE=m
-CONFIG_SYN_COOKIES=y
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-CONFIG_INET_IPCOMP=m
-CONFIG_INET_XFRM_MODE_TRANSPORT=m
-CONFIG_INET_XFRM_MODE_TUNNEL=m
-CONFIG_INET_XFRM_MODE_BEET=m
-CONFIG_INET_DIAG=m
-CONFIG_IPV6_PRIVACY=y
-CONFIG_IPV6_ROUTER_PREF=y
-CONFIG_IPV6_ROUTE_INFO=y
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
-CONFIG_IPV6_TUNNEL=m
-CONFIG_NETFILTER=y
-CONFIG_NETFILTER_NETLINK_QUEUE=m
-CONFIG_NF_CONNTRACK=m
-# CONFIG_NF_CT_PROTO_DCCP is not set
-CONFIG_NF_CT_PROTO_UDPLITE=m
-CONFIG_NF_CONNTRACK_AMANDA=m
-CONFIG_NF_CONNTRACK_FTP=m
-CONFIG_NF_CONNTRACK_H323=m
-CONFIG_NF_CONNTRACK_IRC=m
-CONFIG_NF_CONNTRACK_NETBIOS_NS=m
-CONFIG_NF_CONNTRACK_PPTP=m
-CONFIG_NF_CONNTRACK_SANE=m
-CONFIG_NF_CONNTRACK_SIP=m
-CONFIG_NF_CONNTRACK_TFTP=m
-CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
-CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
-CONFIG_NETFILTER_XT_TARGET_DSCP=m
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFLOG=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
-CONFIG_NETFILTER_XT_TARGET_TRACE=m
-CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
-CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
-CONFIG_NETFILTER_XT_MATCH_COMMENT=m
-CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
-CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
-CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_DSCP=m
-CONFIG_NETFILTER_XT_MATCH_ESP=m
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
-CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
-CONFIG_NETFILTER_XT_MATCH_OWNER=m
-CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
-CONFIG_NETFILTER_XT_MATCH_QUOTA=m
-CONFIG_NETFILTER_XT_MATCH_RATEEST=m
-CONFIG_NETFILTER_XT_MATCH_REALM=m
-CONFIG_NETFILTER_XT_MATCH_RECENT=m
-CONFIG_NETFILTER_XT_MATCH_STATE=m
-CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
-CONFIG_NETFILTER_XT_MATCH_STRING=m
-CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_TIME=m
-CONFIG_NETFILTER_XT_MATCH_U32=m
-CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_AH=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_NF_NAT=m
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-CONFIG_NF_CONNTRACK_IPV6=m
-CONFIG_IP6_NF_QUEUE=m
-CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_AH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_MATCH_FRAG=m
-CONFIG_IP6_NF_MATCH_OPTS=m
-CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_MH=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_TARGET_HL=m
-CONFIG_IP6_NF_TARGET_LOG=m
-CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_TARGET_REJECT=m
-CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_RAW=m
-CONFIG_IP_DCCP=m
-# CONFIG_IP_DCCP_CCID3 is not set
-CONFIG_ATALK=m
-CONFIG_DEV_APPLETALK=m
-CONFIG_IPDDP=m
-CONFIG_IPDDP_ENCAP=y
-CONFIG_IPDDP_DECAP=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_CONNECTOR=m
-CONFIG_BLK_DEV_SWIM=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_ATA_OVER_ETH=m
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDECD=y
-CONFIG_BLK_DEV_MAC_IDE=y
-CONFIG_RAID_ATTRS=m
-CONFIG_SCSI=y
-CONFIG_SCSI_TGT=m
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=m
-CONFIG_CHR_DEV_OSST=m
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=m
-CONFIG_SCSI_CONSTANTS=y
-CONFIG_SCSI_SAS_LIBSAS=m
-# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
-CONFIG_SCSI_SRP_ATTRS=m
-CONFIG_SCSI_SRP_TGT_ATTRS=y
-CONFIG_ISCSI_TCP=m
-CONFIG_MAC_SCSI=y
-CONFIG_SCSI_MAC_ESP=y
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-CONFIG_MD_RAID456=m
-CONFIG_BLK_DEV_DM=m
-CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
-CONFIG_DM_MULTIPATH=m
-CONFIG_DM_UEVENT=y
-CONFIG_ADB=y
-CONFIG_ADB_MACII=y
-CONFIG_ADB_MACIISI=y
-CONFIG_ADB_IOP=y
-CONFIG_ADB_PMU68K=y
-CONFIG_ADB_CUDA=y
-CONFIG_INPUT_ADBHID=y
-CONFIG_MAC_EMUMOUSEBTN=y
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=m
-CONFIG_MACVLAN=m
-CONFIG_EQUALIZER=m
-CONFIG_VETH=m
-CONFIG_NET_ETHERNET=y
-CONFIG_MAC8390=y
-CONFIG_MAC89x0=m
-CONFIG_MACSONIC=m
-CONFIG_MACMACE=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-CONFIG_PPP=m
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_MPPE=m
-CONFIG_PPPOE=m
-CONFIG_SLIP=m
-CONFIG_SLIP_COMPRESSED=y
-CONFIG_SLIP_SMART=y
-CONFIG_SLIP_MODE_SLIP6=y
-CONFIG_NETCONSOLE=m
-CONFIG_NETCONSOLE_DYNAMIC=y
-CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_MOUSE_PS2=m
-CONFIG_MOUSE_SERIAL=m
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_M68K_BEEP=m
-CONFIG_SERIO=m
-# CONFIG_SERIO_SERPORT is not set
-CONFIG_VT_HW_CONSOLE_BINDING=y
-# CONFIG_DEVKMEM is not set
-CONFIG_SERIAL_PMACZILOG=y
-CONFIG_SERIAL_PMACZILOG_TTYS=y
-CONFIG_SERIAL_PMACZILOG_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_GEN_RTC=m
-CONFIG_GEN_RTC_X=y
-# CONFIG_HWMON is not set
-CONFIG_FB=y
-CONFIG_FB_VALKYRIE=y
-CONFIG_FB_MAC=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-CONFIG_HID=m
-CONFIG_HIDRAW=y
-# CONFIG_USB_SUPPORT is not set
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_REISERFS_FS=m
-CONFIG_JFS_FS=m
-CONFIG_XFS_FS=m
-CONFIG_OCFS2_FS=m
-# CONFIG_OCFS2_FS_STATS is not set
-# CONFIG_OCFS2_DEBUG_MASKLOG is not set
-CONFIG_QUOTA_NETLINK_INTERFACE=y
-# CONFIG_PRINT_QUOTA_WARNING is not set
-CONFIG_AUTOFS_FS=m
-CONFIG_AUTOFS4_FS=m
-CONFIG_FUSE_FS=m
-CONFIG_ISO9660_FS=y
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_UDF_FS=m
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=m
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_AFFS_FS=m
-CONFIG_HFS_FS=y
-CONFIG_HFSPLUS_FS=y
-CONFIG_CRAMFS=m
-CONFIG_SQUASHFS=m
-CONFIG_MINIX_FS=y
-CONFIG_HPFS_FS=m
-CONFIG_SYSV_FS=m
-CONFIG_UFS_FS=m
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
-CONFIG_SMB_FS=m
-CONFIG_SMB_NLS_DEFAULT=y
-CONFIG_CODA_FS=m
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
-CONFIG_DLM=m
-CONFIG_MAGIC_SYSRQ=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_CCM=m
-CONFIG_CRYPTO_GCM=m
-CONFIG_CRYPTO_CTS=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_XTS=m
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_RMD128=m
-CONFIG_CRYPTO_RMD160=m
-CONFIG_CRYPTO_RMD256=m
-CONFIG_CRYPTO_RMD320=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_CAMELLIA=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_SALSA20=m
-CONFIG_CRYPTO_SEED=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_ZLIB=m
-CONFIG_CRYPTO_LZO=m
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_HW is not set
-CONFIG_CRC16=m
-CONFIG_CRC_T10DIF=y
diff --git a/ANDROID_3.4.5/arch/m68k/configs/multi_defconfig b/ANDROID_3.4.5/arch/m68k/configs/multi_defconfig
deleted file mode 100644
index 55d394ed..00000000
--- a/ANDROID_3.4.5/arch/m68k/configs/multi_defconfig
+++ /dev/null
@@ -1,445 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_LOCALVERSION="-multi"
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_RELAY=y
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_AMIGA=y
-CONFIG_ATARI=y
-CONFIG_MAC=y
-CONFIG_APOLLO=y
-CONFIG_VME=y
-CONFIG_MVME147=y
-CONFIG_MVME16x=y
-CONFIG_BVME6000=y
-CONFIG_HP300=y
-CONFIG_SUN3X=y
-CONFIG_Q40=y
-CONFIG_M68020=y
-CONFIG_M68040=y
-CONFIG_M68060=y
-CONFIG_BINFMT_AOUT=m
-CONFIG_BINFMT_MISC=m
-CONFIG_ZORRO=y
-CONFIG_AMIGA_PCMCIA=y
-CONFIG_STRAM_PROC=y
-CONFIG_HEARTBEAT=y
-CONFIG_PROC_HARDWARE=y
-CONFIG_ZORRO_NAMES=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_NET_KEY_MIGRATE=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-CONFIG_NET_IPIP=m
-CONFIG_NET_IPGRE=m
-CONFIG_SYN_COOKIES=y
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-CONFIG_INET_IPCOMP=m
-CONFIG_INET_XFRM_MODE_TRANSPORT=m
-CONFIG_INET_XFRM_MODE_TUNNEL=m
-CONFIG_INET_XFRM_MODE_BEET=m
-CONFIG_INET_DIAG=m
-CONFIG_IPV6_PRIVACY=y
-CONFIG_IPV6_ROUTER_PREF=y
-CONFIG_IPV6_ROUTE_INFO=y
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
-CONFIG_IPV6_TUNNEL=m
-CONFIG_NETFILTER=y
-CONFIG_NETFILTER_NETLINK_QUEUE=m
-CONFIG_NF_CONNTRACK=m
-# CONFIG_NF_CT_PROTO_DCCP is not set
-CONFIG_NF_CT_PROTO_UDPLITE=m
-CONFIG_NF_CONNTRACK_AMANDA=m
-CONFIG_NF_CONNTRACK_FTP=m
-CONFIG_NF_CONNTRACK_H323=m
-CONFIG_NF_CONNTRACK_IRC=m
-CONFIG_NF_CONNTRACK_NETBIOS_NS=m
-CONFIG_NF_CONNTRACK_PPTP=m
-CONFIG_NF_CONNTRACK_SANE=m
-CONFIG_NF_CONNTRACK_SIP=m
-CONFIG_NF_CONNTRACK_TFTP=m
-CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
-CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
-CONFIG_NETFILTER_XT_TARGET_DSCP=m
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFLOG=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
-CONFIG_NETFILTER_XT_TARGET_TRACE=m
-CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
-CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
-CONFIG_NETFILTER_XT_MATCH_COMMENT=m
-CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
-CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
-CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_DSCP=m
-CONFIG_NETFILTER_XT_MATCH_ESP=m
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
-CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
-CONFIG_NETFILTER_XT_MATCH_OWNER=m
-CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
-CONFIG_NETFILTER_XT_MATCH_QUOTA=m
-CONFIG_NETFILTER_XT_MATCH_RATEEST=m
-CONFIG_NETFILTER_XT_MATCH_REALM=m
-CONFIG_NETFILTER_XT_MATCH_RECENT=m
-CONFIG_NETFILTER_XT_MATCH_STATE=m
-CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
-CONFIG_NETFILTER_XT_MATCH_STRING=m
-CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_TIME=m
-CONFIG_NETFILTER_XT_MATCH_U32=m
-CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_AH=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_NF_NAT=m
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-CONFIG_NF_CONNTRACK_IPV6=m
-CONFIG_IP6_NF_QUEUE=m
-CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_AH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_MATCH_FRAG=m
-CONFIG_IP6_NF_MATCH_OPTS=m
-CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_MH=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_TARGET_HL=m
-CONFIG_IP6_NF_TARGET_LOG=m
-CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_TARGET_REJECT=m
-CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_RAW=m
-CONFIG_IP_DCCP=m
-# CONFIG_IP_DCCP_CCID3 is not set
-CONFIG_ATALK=m
-CONFIG_DEV_APPLETALK=m
-CONFIG_IPDDP=m
-CONFIG_IPDDP_ENCAP=y
-CONFIG_IPDDP_DECAP=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_CONNECTOR=m
-CONFIG_PARPORT=m
-CONFIG_PARPORT_AMIGA=m
-CONFIG_PARPORT_MFC3=m
-CONFIG_PARPORT_ATARI=m
-CONFIG_PARPORT_1284=y
-CONFIG_AMIGA_FLOPPY=y
-CONFIG_ATARI_FLOPPY=y
-CONFIG_BLK_DEV_SWIM=y
-CONFIG_AMIGA_Z2RAM=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_ATA_OVER_ETH=m
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDECD=y
-CONFIG_BLK_DEV_GAYLE=y
-CONFIG_BLK_DEV_BUDDHA=y
-CONFIG_BLK_DEV_FALCON_IDE=y
-CONFIG_BLK_DEV_MAC_IDE=y
-CONFIG_BLK_DEV_Q40IDE=y
-CONFIG_RAID_ATTRS=m
-CONFIG_SCSI=y
-CONFIG_SCSI_TGT=m
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=m
-CONFIG_CHR_DEV_OSST=m
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=m
-CONFIG_SCSI_CONSTANTS=y
-CONFIG_SCSI_SAS_LIBSAS=m
-# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
-CONFIG_SCSI_SRP_ATTRS=m
-CONFIG_SCSI_SRP_TGT_ATTRS=y
-CONFIG_ISCSI_TCP=m
-CONFIG_A3000_SCSI=y
-CONFIG_A2091_SCSI=y
-CONFIG_GVP11_SCSI=y
-CONFIG_SCSI_A4000T=y
-CONFIG_SCSI_ZORRO7XX=y
-CONFIG_ATARI_SCSI=y
-CONFIG_MAC_SCSI=y
-CONFIG_SCSI_MAC_ESP=y
-CONFIG_MVME147_SCSI=y
-CONFIG_MVME16x_SCSI=y
-CONFIG_BVME6000_SCSI=y
-CONFIG_SUN3X_ESP=y
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-CONFIG_MD_RAID456=m
-CONFIG_BLK_DEV_DM=m
-CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
-CONFIG_DM_MULTIPATH=m
-CONFIG_DM_UEVENT=y
-CONFIG_ADB=y
-CONFIG_ADB_MACII=y
-CONFIG_ADB_MACIISI=y
-CONFIG_ADB_IOP=y
-CONFIG_ADB_PMU68K=y
-CONFIG_ADB_CUDA=y
-CONFIG_INPUT_ADBHID=y
-CONFIG_MAC_EMUMOUSEBTN=y
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=m
-CONFIG_MACVLAN=m
-CONFIG_EQUALIZER=m
-CONFIG_VETH=m
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-CONFIG_ARIADNE=y
-CONFIG_A2065=y
-CONFIG_HYDRA=y
-CONFIG_ZORRO8390=y
-CONFIG_APNE=y
-CONFIG_MAC8390=y
-CONFIG_MAC89x0=y
-CONFIG_MACSONIC=y
-CONFIG_MACMACE=y
-CONFIG_MVME147_NET=y
-CONFIG_MVME16x_NET=y
-CONFIG_BVME6000_NET=y
-CONFIG_ATARILANCE=y
-CONFIG_SUN3LANCE=y
-CONFIG_HPLANCE=y
-CONFIG_NE2000=m
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-CONFIG_PPP=m
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_MPPE=m
-CONFIG_PPPOE=m
-CONFIG_SLIP=m
-CONFIG_SLIP_COMPRESSED=y
-CONFIG_SLIP_SMART=y
-CONFIG_SLIP_MODE_SLIP6=y
-CONFIG_NETCONSOLE=m
-CONFIG_NETCONSOLE_DYNAMIC=y
-CONFIG_INPUT_FF_MEMLESS=m
-CONFIG_KEYBOARD_AMIGA=y
-CONFIG_KEYBOARD_ATARI=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_SUNKBD=y
-CONFIG_MOUSE_PS2=m
-CONFIG_MOUSE_SERIAL=m
-CONFIG_MOUSE_AMIGA=m
-CONFIG_MOUSE_ATARI=m
-CONFIG_INPUT_JOYSTICK=y
-CONFIG_JOYSTICK_AMIGA=m
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_M68K_BEEP=m
-CONFIG_HP_SDC_RTC=y
-# CONFIG_SERIO_SERPORT is not set
-CONFIG_SERIO_Q40KBD=y
-CONFIG_VT_HW_CONSOLE_BINDING=y
-# CONFIG_DEVKMEM is not set
-CONFIG_SERIAL_PMACZILOG=y
-CONFIG_SERIAL_PMACZILOG_TTYS=y
-CONFIG_SERIAL_PMACZILOG_CONSOLE=y
-CONFIG_PRINTER=m
-# CONFIG_HW_RANDOM is not set
-CONFIG_GEN_RTC=y
-CONFIG_GEN_RTC_X=y
-# CONFIG_HWMON is not set
-CONFIG_FB=y
-CONFIG_FB_CIRRUS=y
-CONFIG_FB_AMIGA=y
-CONFIG_FB_AMIGA_OCS=y
-CONFIG_FB_AMIGA_ECS=y
-CONFIG_FB_AMIGA_AGA=y
-CONFIG_FB_FM2=y
-CONFIG_FB_ATARI=y
-CONFIG_FB_VALKYRIE=y
-CONFIG_FB_MAC=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-CONFIG_SOUND=m
-CONFIG_DMASOUND_ATARI=m
-CONFIG_DMASOUND_PAULA=m
-CONFIG_DMASOUND_Q40=m
-CONFIG_HID=m
-CONFIG_HIDRAW=y
-# CONFIG_USB_SUPPORT is not set
-CONFIG_ATARI_DSP56K=m
-CONFIG_AMIGA_BUILTIN_SERIAL=y
-CONFIG_SERIAL_CONSOLE=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_REISERFS_FS=m
-CONFIG_JFS_FS=m
-CONFIG_XFS_FS=m
-CONFIG_OCFS2_FS=m
-# CONFIG_OCFS2_FS_STATS is not set
-# CONFIG_OCFS2_DEBUG_MASKLOG is not set
-CONFIG_QUOTA_NETLINK_INTERFACE=y
-# CONFIG_PRINT_QUOTA_WARNING is not set
-CONFIG_AUTOFS_FS=m
-CONFIG_AUTOFS4_FS=m
-CONFIG_FUSE_FS=m
-CONFIG_ISO9660_FS=y
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_UDF_FS=m
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=m
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_AFFS_FS=m
-CONFIG_HFS_FS=y
-CONFIG_HFSPLUS_FS=y
-CONFIG_CRAMFS=m
-CONFIG_SQUASHFS=m
-CONFIG_MINIX_FS=y
-CONFIG_HPFS_FS=m
-CONFIG_SYSV_FS=m
-CONFIG_UFS_FS=m
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
-CONFIG_SMB_FS=m
-CONFIG_SMB_NLS_DEFAULT=y
-CONFIG_CODA_FS=m
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
-CONFIG_DLM=m
-CONFIG_MAGIC_SYSRQ=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_CCM=m
-CONFIG_CRYPTO_GCM=m
-CONFIG_CRYPTO_CTS=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_XTS=m
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_RMD128=m
-CONFIG_CRYPTO_RMD160=m
-CONFIG_CRYPTO_RMD256=m
-CONFIG_CRYPTO_RMD320=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_CAMELLIA=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_SALSA20=m
-CONFIG_CRYPTO_SEED=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_ZLIB=m
-CONFIG_CRYPTO_LZO=m
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_HW is not set
-CONFIG_CRC16=y
-CONFIG_CRC_T10DIF=y
diff --git a/ANDROID_3.4.5/arch/m68k/configs/mvme147_defconfig b/ANDROID_3.4.5/arch/m68k/configs/mvme147_defconfig
deleted file mode 100644
index af773743..00000000
--- a/ANDROID_3.4.5/arch/m68k/configs/mvme147_defconfig
+++ /dev/null
@@ -1,341 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_LOCALVERSION="-mvme147"
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_RELAY=y
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_VME=y
-CONFIG_MVME147=y
-CONFIG_M68030=y
-CONFIG_BINFMT_AOUT=m
-CONFIG_BINFMT_MISC=m
-CONFIG_PROC_HARDWARE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_NET_KEY_MIGRATE=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-CONFIG_NET_IPIP=m
-CONFIG_NET_IPGRE=m
-CONFIG_SYN_COOKIES=y
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-CONFIG_INET_IPCOMP=m
-CONFIG_INET_XFRM_MODE_TRANSPORT=m
-CONFIG_INET_XFRM_MODE_TUNNEL=m
-CONFIG_INET_XFRM_MODE_BEET=m
-CONFIG_INET_DIAG=m
-CONFIG_IPV6_PRIVACY=y
-CONFIG_IPV6_ROUTER_PREF=y
-CONFIG_IPV6_ROUTE_INFO=y
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
-CONFIG_IPV6_TUNNEL=m
-CONFIG_NETFILTER=y
-CONFIG_NETFILTER_NETLINK_QUEUE=m
-CONFIG_NF_CONNTRACK=m
-# CONFIG_NF_CT_PROTO_DCCP is not set
-CONFIG_NF_CT_PROTO_UDPLITE=m
-CONFIG_NF_CONNTRACK_AMANDA=m
-CONFIG_NF_CONNTRACK_FTP=m
-CONFIG_NF_CONNTRACK_H323=m
-CONFIG_NF_CONNTRACK_IRC=m
-CONFIG_NF_CONNTRACK_NETBIOS_NS=m
-CONFIG_NF_CONNTRACK_PPTP=m
-CONFIG_NF_CONNTRACK_SANE=m
-CONFIG_NF_CONNTRACK_SIP=m
-CONFIG_NF_CONNTRACK_TFTP=m
-CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
-CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
-CONFIG_NETFILTER_XT_TARGET_DSCP=m
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFLOG=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
-CONFIG_NETFILTER_XT_TARGET_TRACE=m
-CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
-CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
-CONFIG_NETFILTER_XT_MATCH_COMMENT=m
-CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
-CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
-CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_DSCP=m
-CONFIG_NETFILTER_XT_MATCH_ESP=m
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
-CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
-CONFIG_NETFILTER_XT_MATCH_OWNER=m
-CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
-CONFIG_NETFILTER_XT_MATCH_QUOTA=m
-CONFIG_NETFILTER_XT_MATCH_RATEEST=m
-CONFIG_NETFILTER_XT_MATCH_REALM=m
-CONFIG_NETFILTER_XT_MATCH_RECENT=m
-CONFIG_NETFILTER_XT_MATCH_STATE=m
-CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
-CONFIG_NETFILTER_XT_MATCH_STRING=m
-CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_TIME=m
-CONFIG_NETFILTER_XT_MATCH_U32=m
-CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_AH=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_NF_NAT=m
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-CONFIG_NF_CONNTRACK_IPV6=m
-CONFIG_IP6_NF_QUEUE=m
-CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_AH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_MATCH_FRAG=m
-CONFIG_IP6_NF_MATCH_OPTS=m
-CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_MH=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_TARGET_HL=m
-CONFIG_IP6_NF_TARGET_LOG=m
-CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_TARGET_REJECT=m
-CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_RAW=m
-CONFIG_IP_DCCP=m
-# CONFIG_IP_DCCP_CCID3 is not set
-CONFIG_ATALK=m
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_CONNECTOR=m
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_ATA_OVER_ETH=m
-CONFIG_RAID_ATTRS=m
-CONFIG_SCSI=y
-CONFIG_SCSI_TGT=m
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=m
-CONFIG_CHR_DEV_OSST=m
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=m
-CONFIG_SCSI_CONSTANTS=y
-CONFIG_SCSI_SAS_LIBSAS=m
-# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
-CONFIG_SCSI_SRP_ATTRS=m
-CONFIG_SCSI_SRP_TGT_ATTRS=y
-CONFIG_ISCSI_TCP=m
-CONFIG_MVME147_SCSI=y
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-CONFIG_MD_RAID456=m
-CONFIG_BLK_DEV_DM=m
-CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
-CONFIG_DM_MULTIPATH=m
-CONFIG_DM_UEVENT=y
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=m
-CONFIG_MACVLAN=m
-CONFIG_EQUALIZER=m
-CONFIG_VETH=m
-CONFIG_NET_ETHERNET=y
-CONFIG_MVME147_NET=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-CONFIG_PPP=m
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_MPPE=m
-CONFIG_PPPOE=m
-CONFIG_SLIP=m
-CONFIG_SLIP_COMPRESSED=y
-CONFIG_SLIP_SMART=y
-CONFIG_SLIP_MODE_SLIP6=y
-CONFIG_NETCONSOLE=m
-CONFIG_NETCONSOLE_DYNAMIC=y
-CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_MOUSE_PS2=m
-CONFIG_MOUSE_SERIAL=m
-CONFIG_SERIO=m
-# CONFIG_SERIO_SERPORT is not set
-CONFIG_VT_HW_CONSOLE_BINDING=y
-# CONFIG_DEVKMEM is not set
-# CONFIG_HW_RANDOM is not set
-CONFIG_GEN_RTC=m
-CONFIG_GEN_RTC_X=y
-# CONFIG_HWMON is not set
-CONFIG_HID=m
-CONFIG_HIDRAW=y
-# CONFIG_USB_SUPPORT is not set
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_REISERFS_FS=m
-CONFIG_JFS_FS=m
-CONFIG_XFS_FS=m
-CONFIG_OCFS2_FS=m
-# CONFIG_OCFS2_FS_STATS is not set
-# CONFIG_OCFS2_DEBUG_MASKLOG is not set
-CONFIG_QUOTA_NETLINK_INTERFACE=y
-# CONFIG_PRINT_QUOTA_WARNING is not set
-CONFIG_AUTOFS_FS=m
-CONFIG_AUTOFS4_FS=m
-CONFIG_FUSE_FS=m
-CONFIG_ISO9660_FS=y
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_UDF_FS=m
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=m
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_AFFS_FS=m
-CONFIG_HFS_FS=m
-CONFIG_HFSPLUS_FS=m
-CONFIG_CRAMFS=m
-CONFIG_SQUASHFS=m
-CONFIG_MINIX_FS=y
-CONFIG_HPFS_FS=m
-CONFIG_SYSV_FS=m
-CONFIG_UFS_FS=m
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
-CONFIG_SMB_FS=m
-CONFIG_SMB_NLS_DEFAULT=y
-CONFIG_CODA_FS=m
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
-CONFIG_DLM=m
-CONFIG_MAGIC_SYSRQ=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_CCM=m
-CONFIG_CRYPTO_GCM=m
-CONFIG_CRYPTO_CTS=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_XTS=m
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_RMD128=m
-CONFIG_CRYPTO_RMD160=m
-CONFIG_CRYPTO_RMD256=m
-CONFIG_CRYPTO_RMD320=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_CAMELLIA=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_SALSA20=m
-CONFIG_CRYPTO_SEED=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_ZLIB=m
-CONFIG_CRYPTO_LZO=m
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_HW is not set
-CONFIG_CRC16=m
-CONFIG_CRC_T10DIF=y
diff --git a/ANDROID_3.4.5/arch/m68k/configs/mvme16x_defconfig b/ANDROID_3.4.5/arch/m68k/configs/mvme16x_defconfig
deleted file mode 100644
index cdb70d66..00000000
--- a/ANDROID_3.4.5/arch/m68k/configs/mvme16x_defconfig
+++ /dev/null
@@ -1,342 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_LOCALVERSION="-mvme16x"
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_RELAY=y
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_VME=y
-CONFIG_MVME16x=y
-CONFIG_M68040=y
-CONFIG_M68060=y
-CONFIG_BINFMT_AOUT=m
-CONFIG_BINFMT_MISC=m
-CONFIG_PROC_HARDWARE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_NET_KEY_MIGRATE=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-CONFIG_NET_IPIP=m
-CONFIG_NET_IPGRE=m
-CONFIG_SYN_COOKIES=y
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-CONFIG_INET_IPCOMP=m
-CONFIG_INET_XFRM_MODE_TRANSPORT=m
-CONFIG_INET_XFRM_MODE_TUNNEL=m
-CONFIG_INET_XFRM_MODE_BEET=m
-CONFIG_INET_DIAG=m
-CONFIG_IPV6_PRIVACY=y
-CONFIG_IPV6_ROUTER_PREF=y
-CONFIG_IPV6_ROUTE_INFO=y
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
-CONFIG_IPV6_TUNNEL=m
-CONFIG_NETFILTER=y
-CONFIG_NETFILTER_NETLINK_QUEUE=m
-CONFIG_NF_CONNTRACK=m
-# CONFIG_NF_CT_PROTO_DCCP is not set
-CONFIG_NF_CT_PROTO_UDPLITE=m
-CONFIG_NF_CONNTRACK_AMANDA=m
-CONFIG_NF_CONNTRACK_FTP=m
-CONFIG_NF_CONNTRACK_H323=m
-CONFIG_NF_CONNTRACK_IRC=m
-CONFIG_NF_CONNTRACK_NETBIOS_NS=m
-CONFIG_NF_CONNTRACK_PPTP=m
-CONFIG_NF_CONNTRACK_SANE=m
-CONFIG_NF_CONNTRACK_SIP=m
-CONFIG_NF_CONNTRACK_TFTP=m
-CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
-CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
-CONFIG_NETFILTER_XT_TARGET_DSCP=m
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFLOG=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
-CONFIG_NETFILTER_XT_TARGET_TRACE=m
-CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
-CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
-CONFIG_NETFILTER_XT_MATCH_COMMENT=m
-CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
-CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
-CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_DSCP=m
-CONFIG_NETFILTER_XT_MATCH_ESP=m
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
-CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
-CONFIG_NETFILTER_XT_MATCH_OWNER=m
-CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
-CONFIG_NETFILTER_XT_MATCH_QUOTA=m
-CONFIG_NETFILTER_XT_MATCH_RATEEST=m
-CONFIG_NETFILTER_XT_MATCH_REALM=m
-CONFIG_NETFILTER_XT_MATCH_RECENT=m
-CONFIG_NETFILTER_XT_MATCH_STATE=m
-CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
-CONFIG_NETFILTER_XT_MATCH_STRING=m
-CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_TIME=m
-CONFIG_NETFILTER_XT_MATCH_U32=m
-CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_AH=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_NF_NAT=m
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-CONFIG_NF_CONNTRACK_IPV6=m
-CONFIG_IP6_NF_QUEUE=m
-CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_AH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_MATCH_FRAG=m
-CONFIG_IP6_NF_MATCH_OPTS=m
-CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_MH=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_TARGET_HL=m
-CONFIG_IP6_NF_TARGET_LOG=m
-CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_TARGET_REJECT=m
-CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_RAW=m
-CONFIG_IP_DCCP=m
-# CONFIG_IP_DCCP_CCID3 is not set
-CONFIG_ATALK=m
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_CONNECTOR=m
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_ATA_OVER_ETH=m
-CONFIG_RAID_ATTRS=m
-CONFIG_SCSI=y
-CONFIG_SCSI_TGT=m
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=m
-CONFIG_CHR_DEV_OSST=m
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=m
-CONFIG_SCSI_CONSTANTS=y
-CONFIG_SCSI_SAS_LIBSAS=m
-# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
-CONFIG_SCSI_SRP_ATTRS=m
-CONFIG_SCSI_SRP_TGT_ATTRS=y
-CONFIG_ISCSI_TCP=m
-CONFIG_MVME16x_SCSI=y
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-CONFIG_MD_RAID456=m
-CONFIG_BLK_DEV_DM=m
-CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
-CONFIG_DM_MULTIPATH=m
-CONFIG_DM_UEVENT=y
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=m
-CONFIG_MACVLAN=m
-CONFIG_EQUALIZER=m
-CONFIG_VETH=m
-CONFIG_NET_ETHERNET=y
-CONFIG_MVME16x_NET=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-CONFIG_PPP=m
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_MPPE=m
-CONFIG_PPPOE=m
-CONFIG_SLIP=m
-CONFIG_SLIP_COMPRESSED=y
-CONFIG_SLIP_SMART=y
-CONFIG_SLIP_MODE_SLIP6=y
-CONFIG_NETCONSOLE=m
-CONFIG_NETCONSOLE_DYNAMIC=y
-CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_MOUSE_PS2=m
-CONFIG_MOUSE_SERIAL=m
-CONFIG_SERIO=m
-# CONFIG_SERIO_SERPORT is not set
-CONFIG_VT_HW_CONSOLE_BINDING=y
-# CONFIG_DEVKMEM is not set
-# CONFIG_HW_RANDOM is not set
-CONFIG_GEN_RTC=m
-CONFIG_GEN_RTC_X=y
-# CONFIG_HWMON is not set
-CONFIG_HID=m
-CONFIG_HIDRAW=y
-# CONFIG_USB_SUPPORT is not set
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_REISERFS_FS=m
-CONFIG_JFS_FS=m
-CONFIG_XFS_FS=m
-CONFIG_OCFS2_FS=m
-# CONFIG_OCFS2_FS_STATS is not set
-# CONFIG_OCFS2_DEBUG_MASKLOG is not set
-CONFIG_QUOTA_NETLINK_INTERFACE=y
-# CONFIG_PRINT_QUOTA_WARNING is not set
-CONFIG_AUTOFS_FS=m
-CONFIG_AUTOFS4_FS=m
-CONFIG_FUSE_FS=m
-CONFIG_ISO9660_FS=y
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_UDF_FS=m
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=m
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_AFFS_FS=m
-CONFIG_HFS_FS=m
-CONFIG_HFSPLUS_FS=m
-CONFIG_CRAMFS=m
-CONFIG_SQUASHFS=m
-CONFIG_MINIX_FS=y
-CONFIG_HPFS_FS=m
-CONFIG_SYSV_FS=m
-CONFIG_UFS_FS=m
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
-CONFIG_SMB_FS=m
-CONFIG_SMB_NLS_DEFAULT=y
-CONFIG_CODA_FS=m
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
-CONFIG_DLM=m
-CONFIG_MAGIC_SYSRQ=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_CCM=m
-CONFIG_CRYPTO_GCM=m
-CONFIG_CRYPTO_CTS=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_XTS=m
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_RMD128=m
-CONFIG_CRYPTO_RMD160=m
-CONFIG_CRYPTO_RMD256=m
-CONFIG_CRYPTO_RMD320=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_CAMELLIA=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_SALSA20=m
-CONFIG_CRYPTO_SEED=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_ZLIB=m
-CONFIG_CRYPTO_LZO=m
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_HW is not set
-CONFIG_CRC16=m
-CONFIG_CRC_T10DIF=y
diff --git a/ANDROID_3.4.5/arch/m68k/configs/q40_defconfig b/ANDROID_3.4.5/arch/m68k/configs/q40_defconfig
deleted file mode 100644
index 46bed78d..00000000
--- a/ANDROID_3.4.5/arch/m68k/configs/q40_defconfig
+++ /dev/null
@@ -1,347 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_LOCALVERSION="-q40"
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_RELAY=y
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_Q40=y
-CONFIG_M68040=y
-CONFIG_M68060=y
-CONFIG_BINFMT_AOUT=m
-CONFIG_BINFMT_MISC=m
-CONFIG_HEARTBEAT=y
-CONFIG_PROC_HARDWARE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_NET_KEY_MIGRATE=y
-CONFIG_INET=y
-CONFIG_NET_IPIP=m
-CONFIG_NET_IPGRE=m
-CONFIG_SYN_COOKIES=y
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-CONFIG_INET_IPCOMP=m
-CONFIG_INET_XFRM_MODE_TRANSPORT=m
-CONFIG_INET_XFRM_MODE_TUNNEL=m
-CONFIG_INET_XFRM_MODE_BEET=m
-CONFIG_INET_DIAG=m
-CONFIG_IPV6_PRIVACY=y
-CONFIG_IPV6_ROUTER_PREF=y
-CONFIG_IPV6_ROUTE_INFO=y
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
-CONFIG_IPV6_TUNNEL=m
-CONFIG_NETFILTER=y
-CONFIG_NETFILTER_NETLINK_QUEUE=m
-CONFIG_NF_CONNTRACK=m
-# CONFIG_NF_CT_PROTO_DCCP is not set
-CONFIG_NF_CT_PROTO_UDPLITE=m
-CONFIG_NF_CONNTRACK_AMANDA=m
-CONFIG_NF_CONNTRACK_FTP=m
-CONFIG_NF_CONNTRACK_H323=m
-CONFIG_NF_CONNTRACK_IRC=m
-CONFIG_NF_CONNTRACK_NETBIOS_NS=m
-CONFIG_NF_CONNTRACK_PPTP=m
-CONFIG_NF_CONNTRACK_SANE=m
-CONFIG_NF_CONNTRACK_SIP=m
-CONFIG_NF_CONNTRACK_TFTP=m
-CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
-CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
-CONFIG_NETFILTER_XT_TARGET_DSCP=m
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFLOG=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
-CONFIG_NETFILTER_XT_TARGET_TRACE=m
-CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
-CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
-CONFIG_NETFILTER_XT_MATCH_COMMENT=m
-CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
-CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
-CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_DSCP=m
-CONFIG_NETFILTER_XT_MATCH_ESP=m
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
-CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
-CONFIG_NETFILTER_XT_MATCH_OWNER=m
-CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
-CONFIG_NETFILTER_XT_MATCH_QUOTA=m
-CONFIG_NETFILTER_XT_MATCH_RATEEST=m
-CONFIG_NETFILTER_XT_MATCH_REALM=m
-CONFIG_NETFILTER_XT_MATCH_RECENT=m
-CONFIG_NETFILTER_XT_MATCH_STATE=m
-CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
-CONFIG_NETFILTER_XT_MATCH_STRING=m
-CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_TIME=m
-CONFIG_NETFILTER_XT_MATCH_U32=m
-CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_AH=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_NF_NAT=m
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-CONFIG_NF_CONNTRACK_IPV6=m
-CONFIG_IP6_NF_QUEUE=m
-CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_AH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_MATCH_FRAG=m
-CONFIG_IP6_NF_MATCH_OPTS=m
-CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_MH=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_TARGET_HL=m
-CONFIG_IP6_NF_TARGET_LOG=m
-CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_TARGET_REJECT=m
-CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_RAW=m
-CONFIG_IP_DCCP=m
-# CONFIG_IP_DCCP_CCID3 is not set
-CONFIG_ATALK=m
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_CONNECTOR=m
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_ATA_OVER_ETH=m
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDECD=y
-CONFIG_BLK_DEV_Q40IDE=y
-CONFIG_RAID_ATTRS=m
-CONFIG_SCSI=y
-CONFIG_SCSI_TGT=m
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=m
-CONFIG_CHR_DEV_OSST=m
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=m
-CONFIG_SCSI_CONSTANTS=y
-CONFIG_SCSI_SAS_LIBSAS=m
-# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
-CONFIG_SCSI_SRP_ATTRS=m
-CONFIG_SCSI_SRP_TGT_ATTRS=y
-CONFIG_ISCSI_TCP=m
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-CONFIG_MD_RAID456=m
-CONFIG_BLK_DEV_DM=m
-CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
-CONFIG_DM_MULTIPATH=m
-CONFIG_DM_UEVENT=y
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=m
-CONFIG_MACVLAN=m
-CONFIG_EQUALIZER=m
-CONFIG_VETH=m
-CONFIG_NET_ETHERNET=y
-CONFIG_NE2000=m
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-CONFIG_PPP=m
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_MPPE=m
-CONFIG_PPPOE=m
-CONFIG_SLIP=m
-CONFIG_SLIP_COMPRESSED=y
-CONFIG_SLIP_SMART=y
-CONFIG_SLIP_MODE_SLIP6=y
-CONFIG_NETCONSOLE=m
-CONFIG_NETCONSOLE_DYNAMIC=y
-CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_MOUSE_PS2=m
-CONFIG_MOUSE_SERIAL=m
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_M68K_BEEP=m
-CONFIG_SERIO=m
-# CONFIG_SERIO_SERPORT is not set
-CONFIG_SERIO_Q40KBD=m
-CONFIG_VT_HW_CONSOLE_BINDING=y
-# CONFIG_DEVKMEM is not set
-# CONFIG_HW_RANDOM is not set
-CONFIG_GEN_RTC=m
-CONFIG_GEN_RTC_X=y
-# CONFIG_HWMON is not set
-CONFIG_FB=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-CONFIG_SOUND=m
-CONFIG_DMASOUND_Q40=m
-CONFIG_HID=m
-CONFIG_HIDRAW=y
-# CONFIG_USB_SUPPORT is not set
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_REISERFS_FS=m
-CONFIG_JFS_FS=m
-CONFIG_XFS_FS=m
-CONFIG_OCFS2_FS=m
-# CONFIG_OCFS2_FS_STATS is not set
-# CONFIG_OCFS2_DEBUG_MASKLOG is not set
-CONFIG_QUOTA_NETLINK_INTERFACE=y
-# CONFIG_PRINT_QUOTA_WARNING is not set
-CONFIG_AUTOFS_FS=m
-CONFIG_AUTOFS4_FS=m
-CONFIG_FUSE_FS=m
-CONFIG_ISO9660_FS=y
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_UDF_FS=m
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=m
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_AFFS_FS=m
-CONFIG_HFS_FS=m
-CONFIG_HFSPLUS_FS=m
-CONFIG_CRAMFS=m
-CONFIG_SQUASHFS=m
-CONFIG_MINIX_FS=y
-CONFIG_HPFS_FS=m
-CONFIG_SYSV_FS=m
-CONFIG_UFS_FS=m
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
-CONFIG_SMB_FS=m
-CONFIG_SMB_NLS_DEFAULT=y
-CONFIG_CODA_FS=m
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
-CONFIG_DLM=m
-CONFIG_MAGIC_SYSRQ=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_CCM=m
-CONFIG_CRYPTO_GCM=m
-CONFIG_CRYPTO_CTS=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_XTS=m
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_RMD128=m
-CONFIG_CRYPTO_RMD160=m
-CONFIG_CRYPTO_RMD256=m
-CONFIG_CRYPTO_RMD320=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_CAMELLIA=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_SALSA20=m
-CONFIG_CRYPTO_SEED=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_ZLIB=m
-CONFIG_CRYPTO_LZO=m
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_HW is not set
-CONFIG_CRC16=m
-CONFIG_CRC_T10DIF=y
diff --git a/ANDROID_3.4.5/arch/m68k/configs/sun3_defconfig b/ANDROID_3.4.5/arch/m68k/configs/sun3_defconfig
deleted file mode 100644
index 86f7772b..00000000
--- a/ANDROID_3.4.5/arch/m68k/configs/sun3_defconfig
+++ /dev/null
@@ -1,343 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_LOCALVERSION="-sun3"
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_RELAY=y
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_SUN3=y
-CONFIG_BINFMT_AOUT=m
-CONFIG_BINFMT_MISC=m
-CONFIG_PROC_HARDWARE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_NET_KEY_MIGRATE=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-CONFIG_NET_IPIP=m
-CONFIG_NET_IPGRE=m
-CONFIG_SYN_COOKIES=y
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-CONFIG_INET_IPCOMP=m
-CONFIG_INET_XFRM_MODE_TRANSPORT=m
-CONFIG_INET_XFRM_MODE_TUNNEL=m
-CONFIG_INET_XFRM_MODE_BEET=m
-CONFIG_INET_DIAG=m
-CONFIG_IPV6_PRIVACY=y
-CONFIG_IPV6_ROUTER_PREF=y
-CONFIG_IPV6_ROUTE_INFO=y
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
-CONFIG_IPV6_TUNNEL=m
-CONFIG_NETFILTER=y
-CONFIG_NETFILTER_NETLINK_QUEUE=m
-CONFIG_NF_CONNTRACK=m
-# CONFIG_NF_CT_PROTO_DCCP is not set
-CONFIG_NF_CT_PROTO_UDPLITE=m
-CONFIG_NF_CONNTRACK_AMANDA=m
-CONFIG_NF_CONNTRACK_FTP=m
-CONFIG_NF_CONNTRACK_H323=m
-CONFIG_NF_CONNTRACK_IRC=m
-CONFIG_NF_CONNTRACK_NETBIOS_NS=m
-CONFIG_NF_CONNTRACK_PPTP=m
-CONFIG_NF_CONNTRACK_SANE=m
-CONFIG_NF_CONNTRACK_SIP=m
-CONFIG_NF_CONNTRACK_TFTP=m
-CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
-CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
-CONFIG_NETFILTER_XT_TARGET_DSCP=m
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFLOG=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
-CONFIG_NETFILTER_XT_TARGET_TRACE=m
-CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
-CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
-CONFIG_NETFILTER_XT_MATCH_COMMENT=m
-CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
-CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
-CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_DSCP=m
-CONFIG_NETFILTER_XT_MATCH_ESP=m
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
-CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
-CONFIG_NETFILTER_XT_MATCH_OWNER=m
-CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
-CONFIG_NETFILTER_XT_MATCH_QUOTA=m
-CONFIG_NETFILTER_XT_MATCH_RATEEST=m
-CONFIG_NETFILTER_XT_MATCH_REALM=m
-CONFIG_NETFILTER_XT_MATCH_RECENT=m
-CONFIG_NETFILTER_XT_MATCH_STATE=m
-CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
-CONFIG_NETFILTER_XT_MATCH_STRING=m
-CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_TIME=m
-CONFIG_NETFILTER_XT_MATCH_U32=m
-CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_AH=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_NF_NAT=m
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-CONFIG_NF_CONNTRACK_IPV6=m
-CONFIG_IP6_NF_QUEUE=m
-CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_AH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_MATCH_FRAG=m
-CONFIG_IP6_NF_MATCH_OPTS=m
-CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_MH=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_TARGET_HL=m
-CONFIG_IP6_NF_TARGET_LOG=m
-CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_TARGET_REJECT=m
-CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_RAW=m
-CONFIG_IP_DCCP=m
-# CONFIG_IP_DCCP_CCID3 is not set
-CONFIG_ATALK=m
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_CONNECTOR=m
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_ATA_OVER_ETH=m
-CONFIG_RAID_ATTRS=m
-CONFIG_SCSI=y
-CONFIG_SCSI_TGT=m
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=m
-CONFIG_CHR_DEV_OSST=m
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=m
-CONFIG_SCSI_CONSTANTS=y
-CONFIG_SCSI_SAS_LIBSAS=m
-# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
-CONFIG_SCSI_SRP_ATTRS=m
-CONFIG_SCSI_SRP_TGT_ATTRS=y
-CONFIG_ISCSI_TCP=m
-CONFIG_SUN3_SCSI=y
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-CONFIG_MD_RAID456=m
-CONFIG_BLK_DEV_DM=m
-CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
-CONFIG_DM_MULTIPATH=m
-CONFIG_DM_UEVENT=y
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=m
-CONFIG_MACVLAN=m
-CONFIG_EQUALIZER=m
-CONFIG_VETH=m
-CONFIG_NET_ETHERNET=y
-CONFIG_SUN3LANCE=y
-CONFIG_SUN3_82586=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-CONFIG_PPP=m
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_MPPE=m
-CONFIG_PPPOE=m
-CONFIG_SLIP=m
-CONFIG_SLIP_COMPRESSED=y
-CONFIG_SLIP_SMART=y
-CONFIG_SLIP_MODE_SLIP6=y
-CONFIG_NETCONSOLE=m
-CONFIG_NETCONSOLE_DYNAMIC=y
-CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_SUNKBD=y
-CONFIG_MOUSE_PS2=m
-CONFIG_MOUSE_SERIAL=m
-# CONFIG_SERIO_SERPORT is not set
-CONFIG_VT_HW_CONSOLE_BINDING=y
-# CONFIG_DEVKMEM is not set
-# CONFIG_HW_RANDOM is not set
-CONFIG_GEN_RTC=m
-CONFIG_GEN_RTC_X=y
-# CONFIG_HWMON is not set
-CONFIG_FB=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-CONFIG_HID=m
-CONFIG_HIDRAW=y
-# CONFIG_USB_SUPPORT is not set
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_REISERFS_FS=m
-CONFIG_JFS_FS=m
-CONFIG_XFS_FS=m
-CONFIG_OCFS2_FS=m
-# CONFIG_OCFS2_FS_STATS is not set
-# CONFIG_OCFS2_DEBUG_MASKLOG is not set
-CONFIG_QUOTA_NETLINK_INTERFACE=y
-# CONFIG_PRINT_QUOTA_WARNING is not set
-CONFIG_AUTOFS_FS=m
-CONFIG_AUTOFS4_FS=m
-CONFIG_FUSE_FS=m
-CONFIG_ISO9660_FS=y
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_UDF_FS=m
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=m
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_AFFS_FS=m
-CONFIG_HFS_FS=m
-CONFIG_HFSPLUS_FS=m
-CONFIG_CRAMFS=m
-CONFIG_SQUASHFS=m
-CONFIG_MINIX_FS=y
-CONFIG_HPFS_FS=m
-CONFIG_SYSV_FS=m
-CONFIG_UFS_FS=m
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
-CONFIG_SMB_FS=m
-CONFIG_SMB_NLS_DEFAULT=y
-CONFIG_CODA_FS=m
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
-CONFIG_DLM=m
-CONFIG_MAGIC_SYSRQ=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_CCM=m
-CONFIG_CRYPTO_GCM=m
-CONFIG_CRYPTO_CTS=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_XTS=m
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_RMD128=m
-CONFIG_CRYPTO_RMD160=m
-CONFIG_CRYPTO_RMD256=m
-CONFIG_CRYPTO_RMD320=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_CAMELLIA=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_SALSA20=m
-CONFIG_CRYPTO_SEED=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_ZLIB=m
-CONFIG_CRYPTO_LZO=m
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_HW is not set
-CONFIG_CRC16=m
-CONFIG_CRC_T10DIF=y
diff --git a/ANDROID_3.4.5/arch/m68k/configs/sun3x_defconfig b/ANDROID_3.4.5/arch/m68k/configs/sun3x_defconfig
deleted file mode 100644
index 28826145..00000000
--- a/ANDROID_3.4.5/arch/m68k/configs/sun3x_defconfig
+++ /dev/null
@@ -1,342 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_LOCALVERSION="-sun3x"
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_RELAY=y
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_SUN3X=y
-CONFIG_BINFMT_AOUT=m
-CONFIG_BINFMT_MISC=m
-CONFIG_PROC_HARDWARE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_NET_KEY_MIGRATE=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-CONFIG_NET_IPIP=m
-CONFIG_NET_IPGRE=m
-CONFIG_SYN_COOKIES=y
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-CONFIG_INET_IPCOMP=m
-CONFIG_INET_XFRM_MODE_TRANSPORT=m
-CONFIG_INET_XFRM_MODE_TUNNEL=m
-CONFIG_INET_XFRM_MODE_BEET=m
-CONFIG_INET_DIAG=m
-CONFIG_IPV6_PRIVACY=y
-CONFIG_IPV6_ROUTER_PREF=y
-CONFIG_IPV6_ROUTE_INFO=y
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
-CONFIG_IPV6_TUNNEL=m
-CONFIG_NETFILTER=y
-CONFIG_NETFILTER_NETLINK_QUEUE=m
-CONFIG_NF_CONNTRACK=m
-# CONFIG_NF_CT_PROTO_DCCP is not set
-CONFIG_NF_CT_PROTO_UDPLITE=m
-CONFIG_NF_CONNTRACK_AMANDA=m
-CONFIG_NF_CONNTRACK_FTP=m
-CONFIG_NF_CONNTRACK_H323=m
-CONFIG_NF_CONNTRACK_IRC=m
-CONFIG_NF_CONNTRACK_NETBIOS_NS=m
-CONFIG_NF_CONNTRACK_PPTP=m
-CONFIG_NF_CONNTRACK_SANE=m
-CONFIG_NF_CONNTRACK_SIP=m
-CONFIG_NF_CONNTRACK_TFTP=m
-CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
-CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
-CONFIG_NETFILTER_XT_TARGET_DSCP=m
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFLOG=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
-CONFIG_NETFILTER_XT_TARGET_TRACE=m
-CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
-CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
-CONFIG_NETFILTER_XT_MATCH_COMMENT=m
-CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
-CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
-CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_DSCP=m
-CONFIG_NETFILTER_XT_MATCH_ESP=m
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
-CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
-CONFIG_NETFILTER_XT_MATCH_OWNER=m
-CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
-CONFIG_NETFILTER_XT_MATCH_QUOTA=m
-CONFIG_NETFILTER_XT_MATCH_RATEEST=m
-CONFIG_NETFILTER_XT_MATCH_REALM=m
-CONFIG_NETFILTER_XT_MATCH_RECENT=m
-CONFIG_NETFILTER_XT_MATCH_STATE=m
-CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
-CONFIG_NETFILTER_XT_MATCH_STRING=m
-CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_TIME=m
-CONFIG_NETFILTER_XT_MATCH_U32=m
-CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_AH=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_NF_NAT=m
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-CONFIG_NF_CONNTRACK_IPV6=m
-CONFIG_IP6_NF_QUEUE=m
-CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_AH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_MATCH_FRAG=m
-CONFIG_IP6_NF_MATCH_OPTS=m
-CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_MH=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_TARGET_HL=m
-CONFIG_IP6_NF_TARGET_LOG=m
-CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_TARGET_REJECT=m
-CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_RAW=m
-CONFIG_IP_DCCP=m
-# CONFIG_IP_DCCP_CCID3 is not set
-CONFIG_ATALK=m
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_CONNECTOR=m
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_ATA_OVER_ETH=m
-CONFIG_RAID_ATTRS=m
-CONFIG_SCSI=y
-CONFIG_SCSI_TGT=m
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=m
-CONFIG_CHR_DEV_OSST=m
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=m
-CONFIG_SCSI_CONSTANTS=y
-CONFIG_SCSI_SAS_LIBSAS=m
-# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
-CONFIG_SCSI_SRP_ATTRS=m
-CONFIG_SCSI_SRP_TGT_ATTRS=y
-CONFIG_ISCSI_TCP=m
-CONFIG_SUN3X_ESP=y
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-CONFIG_MD_RAID456=m
-CONFIG_BLK_DEV_DM=m
-CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
-CONFIG_DM_MULTIPATH=m
-CONFIG_DM_UEVENT=y
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=m
-CONFIG_MACVLAN=m
-CONFIG_EQUALIZER=m
-CONFIG_VETH=m
-CONFIG_NET_ETHERNET=y
-CONFIG_SUN3LANCE=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-CONFIG_PPP=m
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_MPPE=m
-CONFIG_PPPOE=m
-CONFIG_SLIP=m
-CONFIG_SLIP_COMPRESSED=y
-CONFIG_SLIP_SMART=y
-CONFIG_SLIP_MODE_SLIP6=y
-CONFIG_NETCONSOLE=m
-CONFIG_NETCONSOLE_DYNAMIC=y
-CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_SUNKBD=y
-CONFIG_MOUSE_PS2=m
-CONFIG_MOUSE_SERIAL=m
-# CONFIG_SERIO_SERPORT is not set
-CONFIG_VT_HW_CONSOLE_BINDING=y
-# CONFIG_DEVKMEM is not set
-# CONFIG_HW_RANDOM is not set
-CONFIG_GEN_RTC=m
-CONFIG_GEN_RTC_X=y
-# CONFIG_HWMON is not set
-CONFIG_FB=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-CONFIG_HID=m
-CONFIG_HIDRAW=y
-# CONFIG_USB_SUPPORT is not set
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_REISERFS_FS=m
-CONFIG_JFS_FS=m
-CONFIG_XFS_FS=m
-CONFIG_OCFS2_FS=m
-# CONFIG_OCFS2_FS_STATS is not set
-# CONFIG_OCFS2_DEBUG_MASKLOG is not set
-CONFIG_QUOTA_NETLINK_INTERFACE=y
-# CONFIG_PRINT_QUOTA_WARNING is not set
-CONFIG_AUTOFS_FS=m
-CONFIG_AUTOFS4_FS=m
-CONFIG_FUSE_FS=m
-CONFIG_ISO9660_FS=y
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_UDF_FS=m
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=m
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_AFFS_FS=m
-CONFIG_HFS_FS=m
-CONFIG_HFSPLUS_FS=m
-CONFIG_CRAMFS=m
-CONFIG_SQUASHFS=m
-CONFIG_MINIX_FS=y
-CONFIG_HPFS_FS=m
-CONFIG_SYSV_FS=m
-CONFIG_UFS_FS=m
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
-CONFIG_SMB_FS=m
-CONFIG_SMB_NLS_DEFAULT=y
-CONFIG_CODA_FS=m
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
-CONFIG_DLM=m
-CONFIG_MAGIC_SYSRQ=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_CCM=m
-CONFIG_CRYPTO_GCM=m
-CONFIG_CRYPTO_CTS=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_XTS=m
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_RMD128=m
-CONFIG_CRYPTO_RMD160=m
-CONFIG_CRYPTO_RMD256=m
-CONFIG_CRYPTO_RMD320=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_CAMELLIA=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_SALSA20=m
-CONFIG_CRYPTO_SEED=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_ZLIB=m
-CONFIG_CRYPTO_LZO=m
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_HW is not set
-CONFIG_CRC16=m
-CONFIG_CRC_T10DIF=y
diff --git a/ANDROID_3.4.5/arch/m68k/emu/Makefile b/ANDROID_3.4.5/arch/m68k/emu/Makefile
deleted file mode 100644
index 7dc20108..00000000
--- a/ANDROID_3.4.5/arch/m68k/emu/Makefile
+++ /dev/null
@@ -1,9 +0,0 @@
-#
-# Makefile for Linux arch/m68k/emu source directory
-#
-
-obj-y			+= natfeat.o
-
-obj-$(CONFIG_NFBLOCK)	+= nfblock.o
-obj-$(CONFIG_NFCON)	+= nfcon.o
-obj-$(CONFIG_NFETH)	+= nfeth.o
diff --git a/ANDROID_3.4.5/arch/m68k/emu/natfeat.c b/ANDROID_3.4.5/arch/m68k/emu/natfeat.c
deleted file mode 100644
index 2291a7d6..00000000
--- a/ANDROID_3.4.5/arch/m68k/emu/natfeat.c
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- * natfeat.c - ARAnyM hardware support via Native Features (natfeats)
- *
- * Copyright (c) 2005 Petr Stehlik of ARAnyM dev team
- *
- * Reworked for Linux by Roman Zippel <zippel@linux-m68k.org>
- *
- * This software may be used and distributed according to the terms of
- * the GNU General Public License (GPL), incorporated herein by reference.
- */
-
-#include <linux/types.h>
-#include <linux/console.h>
-#include <linux/string.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/io.h>
-#include <asm/machdep.h>
-#include <asm/natfeat.h>
-
-asm("\n"
-"	.global nf_get_id,nf_call\n"
-"nf_get_id:\n"
-"	.short	0x7300\n"
-"	rts\n"
-"nf_call:\n"
-"	.short	0x7301\n"
-"	rts\n"
-"1:	moveq.l	#0,%d0\n"
-"	rts\n"
-"	.section __ex_table,\"a\"\n"
-"	.long	nf_get_id,1b\n"
-"	.long	nf_call,1b\n"
-"	.previous");
-EXPORT_SYMBOL_GPL(nf_get_id);
-EXPORT_SYMBOL_GPL(nf_call);
-
-void nfprint(const char *fmt, ...)
-{
-	static char buf[256];
-	va_list ap;
-	int n;
-
-	va_start(ap, fmt);
-	n = vsnprintf(buf, 256, fmt, ap);
-	nf_call(nf_get_id("NF_STDERR"), buf);
-	va_end(ap);
-}
-
-static void nf_poweroff(void)
-{
-	long id = nf_get_id("NF_SHUTDOWN");
-
-	if (id)
-		nf_call(id);
-}
-
-void nf_init(void)
-{
-	unsigned long id, version;
-	char buf[256];
-
-	id = nf_get_id("NF_VERSION");
-	if (!id)
-		return;
-	version = nf_call(id);
-
-	id = nf_get_id("NF_NAME");
-	if (!id)
-		return;
-	nf_call(id, buf, 256);
-	buf[255] = 0;
-
-	pr_info("NatFeats found (%s, %lu.%lu)\n", buf, version >> 16,
-		version & 0xffff);
-
-	mach_power_off = nf_poweroff;
-}
diff --git a/ANDROID_3.4.5/arch/m68k/emu/nfblock.c b/ANDROID_3.4.5/arch/m68k/emu/nfblock.c
deleted file mode 100644
index e3011338..00000000
--- a/ANDROID_3.4.5/arch/m68k/emu/nfblock.c
+++ /dev/null
@@ -1,194 +0,0 @@
-/*
- * ARAnyM block device driver
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file COPYING in the main directory of this archive
- * for more details.
- */
-
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/init.h>
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/types.h>
-#include <linux/genhd.h>
-#include <linux/blkdev.h>
-#include <linux/hdreg.h>
-#include <linux/slab.h>
-
-#include <asm/natfeat.h>
-
-static long nfhd_id;
-
-enum {
-	/* emulation entry points */
-	NFHD_READ_WRITE = 10,
-	NFHD_GET_CAPACITY = 14,
-
-	/* skip ACSI devices */
-	NFHD_DEV_OFFSET = 8,
-};
-
-static inline s32 nfhd_read_write(u32 major, u32 minor, u32 rwflag, u32 recno,
-				  u32 count, u32 buf)
-{
-	return nf_call(nfhd_id + NFHD_READ_WRITE, major, minor, rwflag, recno,
-		       count, buf);
-}
-
-static inline s32 nfhd_get_capacity(u32 major, u32 minor, u32 *blocks,
-				    u32 *blocksize)
-{
-	return nf_call(nfhd_id + NFHD_GET_CAPACITY, major, minor, blocks,
-		       blocksize);
-}
-
-static LIST_HEAD(nfhd_list);
-
-static int major_num;
-module_param(major_num, int, 0);
-
-struct nfhd_device {
-	struct list_head list;
-	int id;
-	u32 blocks, bsize;
-	int bshift;
-	struct request_queue *queue;
-	struct gendisk *disk;
-};
-
-static void nfhd_make_request(struct request_queue *queue, struct bio *bio)
-{
-	struct nfhd_device *dev = queue->queuedata;
-	struct bio_vec *bvec;
-	int i, dir, len, shift;
-	sector_t sec = bio->bi_sector;
-
-	dir = bio_data_dir(bio);
-	shift = dev->bshift;
-	bio_for_each_segment(bvec, bio, i) {
-		len = bvec->bv_len;
-		len >>= 9;
-		nfhd_read_write(dev->id, 0, dir, sec >> shift, len >> shift,
-				bvec_to_phys(bvec));
-		sec += len;
-	}
-	bio_endio(bio, 0);
-}
-
-static int nfhd_getgeo(struct block_device *bdev, struct hd_geometry *geo)
-{
-	struct nfhd_device *dev = bdev->bd_disk->private_data;
-
-	geo->cylinders = dev->blocks >> (6 - dev->bshift);
-	geo->heads = 4;
-	geo->sectors = 16;
-
-	return 0;
-}
-
-static const struct block_device_operations nfhd_ops = {
-	.owner	= THIS_MODULE,
-	.getgeo	= nfhd_getgeo,
-};
-
-static int __init nfhd_init_one(int id, u32 blocks, u32 bsize)
-{
-	struct nfhd_device *dev;
-	int dev_id = id - NFHD_DEV_OFFSET;
-
-	pr_info("nfhd%u: found device with %u blocks (%u bytes)\n", dev_id,
-		blocks, bsize);
-
-	if (bsize < 512 || (bsize & (bsize - 1))) {
-		pr_warn("nfhd%u: invalid block size\n", dev_id);
-		return -EINVAL;
-	}
-
-	dev = kmalloc(sizeof(struct nfhd_device), GFP_KERNEL);
-	if (!dev)
-		goto out;
-
-	dev->id = id;
-	dev->blocks = blocks;
-	dev->bsize = bsize;
-	dev->bshift = ffs(bsize) - 10;
-
-	dev->queue = blk_alloc_queue(GFP_KERNEL);
-	if (dev->queue == NULL)
-		goto free_dev;
-
-	dev->queue->queuedata = dev;
-	blk_queue_make_request(dev->queue, nfhd_make_request);
-	blk_queue_logical_block_size(dev->queue, bsize);
-
-	dev->disk = alloc_disk(16);
-	if (!dev->disk)
-		goto free_queue;
-
-	dev->disk->major = major_num;
-	dev->disk->first_minor = dev_id * 16;
-	dev->disk->fops = &nfhd_ops;
-	dev->disk->private_data = dev;
-	sprintf(dev->disk->disk_name, "nfhd%u", dev_id);
-	set_capacity(dev->disk, (sector_t)blocks * (bsize / 512));
-	dev->disk->queue = dev->queue;
-
-	add_disk(dev->disk);
-
-	list_add_tail(&dev->list, &nfhd_list);
-
-	return 0;
-
-free_queue:
-	blk_cleanup_queue(dev->queue);
-free_dev:
-	kfree(dev);
-out:
-	return -ENOMEM;
-}
-
-static int __init nfhd_init(void)
-{
-	u32 blocks, bsize;
-	int i;
-
-	nfhd_id = nf_get_id("XHDI");
-	if (!nfhd_id)
-		return -ENODEV;
-
-	major_num = register_blkdev(major_num, "nfhd");
-	if (major_num <= 0) {
-		pr_warn("nfhd: unable to get major number\n");
-		return major_num;
-	}
-
-	for (i = NFHD_DEV_OFFSET; i < 24; i++) {
-		if (nfhd_get_capacity(i, 0, &blocks, &bsize))
-			continue;
-		nfhd_init_one(i, blocks, bsize);
-	}
-
-	return 0;
-}
-
-static void __exit nfhd_exit(void)
-{
-	struct nfhd_device *dev, *next;
-
-	list_for_each_entry_safe(dev, next, &nfhd_list, list) {
-		list_del(&dev->list);
-		del_gendisk(dev->disk);
-		put_disk(dev->disk);
-		blk_cleanup_queue(dev->queue);
-		kfree(dev);
-	}
-	unregister_blkdev(major_num, "nfhd");
-}
-
-module_init(nfhd_init);
-module_exit(nfhd_exit);
-
-MODULE_LICENSE("GPL");
diff --git a/ANDROID_3.4.5/arch/m68k/emu/nfcon.c b/ANDROID_3.4.5/arch/m68k/emu/nfcon.c
deleted file mode 100644
index 8db25e80..00000000
--- a/ANDROID_3.4.5/arch/m68k/emu/nfcon.c
+++ /dev/null
@@ -1,161 +0,0 @@
-/*
- * ARAnyM console driver
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file COPYING in the main directory of this archive
- * for more details.
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/console.h>
-#include <linux/tty.h>
-#include <linux/tty_driver.h>
-#include <linux/tty_flip.h>
-#include <linux/slab.h>
-#include <linux/err.h>
-#include <linux/uaccess.h>
-
-#include <asm/natfeat.h>
-
-static int stderr_id;
-static struct tty_driver *nfcon_tty_driver;
-
-static void nfputs(const char *str, unsigned int count)
-{
-	char buf[68];
-
-	buf[64] = 0;
-	while (count > 64) {
-		memcpy(buf, str, 64);
-		nf_call(stderr_id, buf);
-		str += 64;
-		count -= 64;
-	}
-	memcpy(buf, str, count);
-	buf[count] = 0;
-	nf_call(stderr_id, buf);
-}
-
-static void nfcon_write(struct console *con, const char *str,
-			unsigned int count)
-{
-	nfputs(str, count);
-}
-
-static struct tty_driver *nfcon_device(struct console *con, int *index)
-{
-	*index = 0;
-	return (con->flags & CON_ENABLED) ? nfcon_tty_driver : NULL;
-}
-
-static struct console nf_console = {
-	.name	= "nfcon",
-	.write	= nfcon_write,
-	.device	= nfcon_device,
-	.flags	= CON_PRINTBUFFER,
-	.index	= -1,
-};
-
-
-static int nfcon_tty_open(struct tty_struct *tty, struct file *filp)
-{
-	return 0;
-}
-
-static void nfcon_tty_close(struct tty_struct *tty, struct file *filp)
-{
-}
-
-static int nfcon_tty_write(struct tty_struct *tty, const unsigned char *buf,
-			   int count)
-{
-	nfputs(buf, count);
-	return count;
-}
-
-static int nfcon_tty_put_char(struct tty_struct *tty, unsigned char ch)
-{
-	char temp[2] = { ch, 0 };
-
-	nf_call(stderr_id, temp);
-	return 1;
-}
-
-static int nfcon_tty_write_room(struct tty_struct *tty)
-{
-	return 64;
-}
-
-static const struct tty_operations nfcon_tty_ops = {
-	.open		= nfcon_tty_open,
-	.close		= nfcon_tty_close,
-	.write		= nfcon_tty_write,
-	.put_char	= nfcon_tty_put_char,
-	.write_room	= nfcon_tty_write_room,
-};
-
-#ifndef MODULE
-
-static int __init nf_debug_setup(char *arg)
-{
-	if (strcmp(arg, "nfcon"))
-		return 0;
-
-	stderr_id = nf_get_id("NF_STDERR");
-	if (stderr_id) {
-		nf_console.flags |= CON_ENABLED;
-		register_console(&nf_console);
-	}
-
-	return 0;
-}
-
-early_param("debug", nf_debug_setup);
-
-#endif /* !MODULE */
-
-static int __init nfcon_init(void)
-{
-	int res;
-
-	stderr_id = nf_get_id("NF_STDERR");
-	if (!stderr_id)
-		return -ENODEV;
-
-	nfcon_tty_driver = alloc_tty_driver(1);
-	if (!nfcon_tty_driver)
-		return -ENOMEM;
-
-	nfcon_tty_driver->driver_name = "nfcon";
-	nfcon_tty_driver->name = "nfcon";
-	nfcon_tty_driver->type = TTY_DRIVER_TYPE_SYSTEM;
-	nfcon_tty_driver->subtype = SYSTEM_TYPE_TTY;
-	nfcon_tty_driver->init_termios = tty_std_termios;
-	nfcon_tty_driver->flags = TTY_DRIVER_REAL_RAW;
-
-	tty_set_operations(nfcon_tty_driver, &nfcon_tty_ops);
-	res = tty_register_driver(nfcon_tty_driver);
-	if (res) {
-		pr_err("failed to register nfcon tty driver\n");
-		put_tty_driver(nfcon_tty_driver);
-		return res;
-	}
-
-	if (!(nf_console.flags & CON_ENABLED))
-		register_console(&nf_console);
-
-	return 0;
-}
-
-static void __exit nfcon_exit(void)
-{
-	unregister_console(&nf_console);
-	tty_unregister_driver(nfcon_tty_driver);
-	put_tty_driver(nfcon_tty_driver);
-}
-
-module_init(nfcon_init);
-module_exit(nfcon_exit);
-
-MODULE_LICENSE("GPL");
diff --git a/ANDROID_3.4.5/arch/m68k/emu/nfeth.c b/ANDROID_3.4.5/arch/m68k/emu/nfeth.c
deleted file mode 100644
index a985a7e8..00000000
--- a/ANDROID_3.4.5/arch/m68k/emu/nfeth.c
+++ /dev/null
@@ -1,270 +0,0 @@
-/*
- * atari_nfeth.c - ARAnyM ethernet card driver for GNU/Linux
- *
- * Copyright (c) 2005 Milan Jurik, Petr Stehlik of ARAnyM dev team
- *
- * Based on ARAnyM driver for FreeMiNT written by Standa Opichal
- *
- * This software may be used and distributed according to the terms of
- * the GNU General Public License (GPL), incorporated herein by reference.
- */
-
-#define DRV_VERSION	"0.3"
-#define DRV_RELDATE	"10/12/2005"
-
-#define pr_fmt(fmt)	KBUILD_MODNAME ": " fmt
-
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/interrupt.h>
-#include <linux/module.h>
-#include <asm/natfeat.h>
-#include <asm/virtconvert.h>
-
-enum {
-	GET_VERSION = 0,/* no parameters, return NFAPI_VERSION in d0 */
-	XIF_INTLEVEL,	/* no parameters, return Interrupt Level in d0 */
-	XIF_IRQ,	/* acknowledge interrupt from host */
-	XIF_START,	/* (ethX), called on 'ifup', start receiver thread */
-	XIF_STOP,	/* (ethX), called on 'ifdown', stop the thread */
-	XIF_READLENGTH,	/* (ethX), return size of network data block to read */
-	XIF_READBLOCK,	/* (ethX, buffer, size), read block of network data */
-	XIF_WRITEBLOCK,	/* (ethX, buffer, size), write block of network data */
-	XIF_GET_MAC,	/* (ethX, buffer, size), return MAC HW addr in buffer */
-	XIF_GET_IPHOST,	/* (ethX, buffer, size), return IP address of host */
-	XIF_GET_IPATARI,/* (ethX, buffer, size), return IP address of atari */
-	XIF_GET_NETMASK	/* (ethX, buffer, size), return IP netmask */
-};
-
-#define MAX_UNIT	8
-
-/* These identify the driver base version and may not be removed. */
-static const char version[] __devinitconst =
-	KERN_INFO KBUILD_MODNAME ".c:v" DRV_VERSION " " DRV_RELDATE
-	" S.Opichal, M.Jurik, P.Stehlik\n"
-	KERN_INFO " http://aranym.org/\n";
-
-MODULE_AUTHOR("Milan Jurik");
-MODULE_DESCRIPTION("Atari NFeth driver");
-MODULE_LICENSE("GPL");
-/*
-MODULE_PARM(nfeth_debug, "i");
-MODULE_PARM_DESC(nfeth_debug, "nfeth_debug level (1-2)");
-*/
-
-
-static long nfEtherID;
-static int nfEtherIRQ;
-
-struct nfeth_private {
-	int ethX;
-};
-
-static struct net_device *nfeth_dev[MAX_UNIT];
-
-static int nfeth_open(struct net_device *dev)
-{
-	struct nfeth_private *priv = netdev_priv(dev);
-	int res;
-
-	res = nf_call(nfEtherID + XIF_START, priv->ethX);
-	netdev_dbg(dev, "%s: %d\n", __func__, res);
-
-	/* Ready for data */
-	netif_start_queue(dev);
-
-	return 0;
-}
-
-static int nfeth_stop(struct net_device *dev)
-{
-	struct nfeth_private *priv = netdev_priv(dev);
-
-	/* No more data */
-	netif_stop_queue(dev);
-
-	nf_call(nfEtherID + XIF_STOP, priv->ethX);
-
-	return 0;
-}
-
-/*
- * Read a packet out of the adapter and pass it to the upper layers
- */
-static inline void recv_packet(struct net_device *dev)
-{
-	struct nfeth_private *priv = netdev_priv(dev);
-	unsigned short pktlen;
-	struct sk_buff *skb;
-
-	/* read packet length (excluding 32 bit crc) */
-	pktlen = nf_call(nfEtherID + XIF_READLENGTH, priv->ethX);
-
-	netdev_dbg(dev, "%s: %u\n", __func__, pktlen);
-
-	if (!pktlen) {
-		netdev_dbg(dev, "%s: pktlen == 0\n", __func__);
-		dev->stats.rx_errors++;
-		return;
-	}
-
-	skb = dev_alloc_skb(pktlen + 2);
-	if (!skb) {
-		netdev_dbg(dev, "%s: out of mem (buf_alloc failed)\n",
-			   __func__);
-		dev->stats.rx_dropped++;
-		return;
-	}
-
-	skb->dev = dev;
-	skb_reserve(skb, 2);		/* 16 Byte align  */
-	skb_put(skb, pktlen);		/* make room */
-	nf_call(nfEtherID + XIF_READBLOCK, priv->ethX, virt_to_phys(skb->data),
-		pktlen);
-
-	skb->protocol = eth_type_trans(skb, dev);
-	netif_rx(skb);
-	dev->last_rx = jiffies;
-	dev->stats.rx_packets++;
-	dev->stats.rx_bytes += pktlen;
-
-	/* and enqueue packet */
-	return;
-}
-
-static irqreturn_t nfeth_interrupt(int irq, void *dev_id)
-{
-	int i, m, mask;
-
-	mask = nf_call(nfEtherID + XIF_IRQ, 0);
-	for (i = 0, m = 1; i < MAX_UNIT; m <<= 1, i++) {
-		if (mask & m && nfeth_dev[i]) {
-			recv_packet(nfeth_dev[i]);
-			nf_call(nfEtherID + XIF_IRQ, m);
-		}
-	}
-	return IRQ_HANDLED;
-}
-
-static int nfeth_xmit(struct sk_buff *skb, struct net_device *dev)
-{
-	unsigned int len;
-	char *data, shortpkt[ETH_ZLEN];
-	struct nfeth_private *priv = netdev_priv(dev);
-
-	data = skb->data;
-	len = skb->len;
-	if (len < ETH_ZLEN) {
-		memset(shortpkt, 0, ETH_ZLEN);
-		memcpy(shortpkt, data, len);
-		data = shortpkt;
-		len = ETH_ZLEN;
-	}
-
-	netdev_dbg(dev, "%s: send %u bytes\n", __func__, len);
-	nf_call(nfEtherID + XIF_WRITEBLOCK, priv->ethX, virt_to_phys(data),
-		len);
-
-	dev->stats.tx_packets++;
-	dev->stats.tx_bytes += len;
-
-	dev_kfree_skb(skb);
-	return 0;
-}
-
-static void nfeth_tx_timeout(struct net_device *dev)
-{
-	dev->stats.tx_errors++;
-	netif_wake_queue(dev);
-}
-
-static const struct net_device_ops nfeth_netdev_ops = {
-	.ndo_open		= nfeth_open,
-	.ndo_stop		= nfeth_stop,
-	.ndo_start_xmit		= nfeth_xmit,
-	.ndo_tx_timeout		= nfeth_tx_timeout,
-	.ndo_validate_addr	= eth_validate_addr,
-	.ndo_change_mtu		= eth_change_mtu,
-	.ndo_set_mac_address	= eth_mac_addr,
-};
-
-static struct net_device * __init nfeth_probe(int unit)
-{
-	struct net_device *dev;
-	struct nfeth_private *priv;
-	char mac[ETH_ALEN], host_ip[32], local_ip[32];
-	int err;
-
-	if (!nf_call(nfEtherID + XIF_GET_MAC, unit, mac, ETH_ALEN))
-		return NULL;
-
-	dev = alloc_etherdev(sizeof(struct nfeth_private));
-	if (!dev)
-		return NULL;
-
-	dev->irq = nfEtherIRQ;
-	dev->netdev_ops = &nfeth_netdev_ops;
-
-	memcpy(dev->dev_addr, mac, ETH_ALEN);
-
-	priv = netdev_priv(dev);
-	priv->ethX = unit;
-
-	err = register_netdev(dev);
-	if (err) {
-		free_netdev(dev);
-		return NULL;
-	}
-
-	nf_call(nfEtherID + XIF_GET_IPHOST, unit,
-		host_ip, sizeof(host_ip));
-	nf_call(nfEtherID + XIF_GET_IPATARI, unit,
-		local_ip, sizeof(local_ip));
-
-	netdev_info(dev, KBUILD_MODNAME " addr:%s (%s) HWaddr:%pM\n", host_ip,
-		    local_ip, mac);
-
-	return dev;
-}
-
-static int __init nfeth_init(void)
-{
-	long ver;
-	int error, i;
-
-	nfEtherID = nf_get_id("ETHERNET");
-	if (!nfEtherID)
-		return -ENODEV;
-
-	ver = nf_call(nfEtherID + GET_VERSION);
-	pr_info("API %lu\n", ver);
-
-	nfEtherIRQ = nf_call(nfEtherID + XIF_INTLEVEL);
-	error = request_irq(nfEtherIRQ, nfeth_interrupt, IRQF_SHARED,
-			    "eth emu", nfeth_interrupt);
-	if (error) {
-		pr_err("request for irq %d failed %d", nfEtherIRQ, error);
-		return error;
-	}
-
-	for (i = 0; i < MAX_UNIT; i++)
-		nfeth_dev[i] = nfeth_probe(i);
-
-	return 0;
-}
-
-static void __exit nfeth_cleanup(void)
-{
-	int i;
-
-	for (i = 0; i < MAX_UNIT; i++) {
-		if (nfeth_dev[i]) {
-			unregister_netdev(nfeth_dev[0]);
-			free_netdev(nfeth_dev[0]);
-		}
-	}
-	free_irq(nfEtherIRQ, nfeth_interrupt);
-}
-
-module_init(nfeth_init);
-module_exit(nfeth_cleanup);
diff --git a/ANDROID_3.4.5/arch/m68k/fpsp040/Makefile b/ANDROID_3.4.5/arch/m68k/fpsp040/Makefile
deleted file mode 100644
index 9506d883..00000000
--- a/ANDROID_3.4.5/arch/m68k/fpsp040/Makefile
+++ /dev/null
@@ -1,15 +0,0 @@
-#
-# Makefile for Linux arch/m68k/fpsp040 source directory
-#
-
-obj-y    := bindec.o binstr.o decbin.o do_func.o gen_except.o get_op.o \
-	    kernel_ex.o res_func.o round.o sacos.o sasin.o satan.o satanh.o \
-	    scosh.o setox.o sgetem.o sint.o slog2.o slogn.o \
-	    smovecr.o srem_mod.o scale.o \
-	    ssin.o ssinh.o stan.o stanh.o sto_res.o stwotox.o tbldo.o util.o \
-	    x_bsun.o x_fline.o x_operr.o x_ovfl.o x_snan.o x_store.o \
-	    x_unfl.o x_unimp.o x_unsupp.o bugfix.o skeleton.o
-
-EXTRA_LDFLAGS := -x
-
-$(OS_OBJS): fpsp.h
diff --git a/ANDROID_3.4.5/arch/m68k/fpsp040/README b/ANDROID_3.4.5/arch/m68k/fpsp040/README
deleted file mode 100644
index f5749446..00000000
--- a/ANDROID_3.4.5/arch/m68k/fpsp040/README
+++ /dev/null
@@ -1,30 +0,0 @@
-
-MOTOROLA MICROPROCESSOR & MEMORY TECHNOLOGY GROUP
-M68000 Hi-Performance Microprocessor Division
-M68040 Software Package
-
-M68040 Software Package Copyright (c) 1993, 1994 Motorola Inc.
-All rights reserved.
-
-THE SOFTWARE is provided on an "AS IS" basis and without warranty.
-To the maximum extent permitted by applicable law,
-MOTOROLA DISCLAIMS ALL WARRANTIES WHETHER EXPRESS OR IMPLIED,
-INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A
-PARTICULAR PURPOSE and any warranty against infringement with
-regard to the SOFTWARE (INCLUDING ANY MODIFIED VERSIONS THEREOF)
-and any accompanying written materials.
-
-To the maximum extent permitted by applicable law,
-IN NO EVENT SHALL MOTOROLA BE LIABLE FOR ANY DAMAGES WHATSOEVER
-(INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
-PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, OR
-OTHER PECUNIARY LOSS) ARISING OF THE USE OR INABILITY TO USE THE
-SOFTWARE.  Motorola assumes no responsibility for the maintenance
-and support of the SOFTWARE.
-
-You are hereby granted a copyright license to use, modify, and
-distribute the SOFTWARE so long as this entire notice is retained
-without alteration in any modified and/or redistributed versions,
-and that such modified versions are clearly identified as such.
-No licenses are granted by implication, estoppel or otherwise
-under any patents or trademarks of Motorola, Inc.
diff --git a/ANDROID_3.4.5/arch/m68k/fpsp040/bindec.S b/ANDROID_3.4.5/arch/m68k/fpsp040/bindec.S
deleted file mode 100644
index f2e79523..00000000
--- a/ANDROID_3.4.5/arch/m68k/fpsp040/bindec.S
+++ /dev/null
@@ -1,919 +0,0 @@
-|
-|	bindec.sa 3.4 1/3/91
-|
-|	bindec
-|
-|	Description:
-|		Converts an input in extended precision format
-|		to bcd format.
-|
-|	Input:
-|		a0 points to the input extended precision value
-|		value in memory; d0 contains the k-factor sign-extended
-|		to 32-bits.  The input may be either normalized,
-|		unnormalized, or denormalized.
-|
-|	Output:	result in the FP_SCR1 space on the stack.
-|
-|	Saves and Modifies: D2-D7,A2,FP2
-|
-|	Algorithm:
-|
-|	A1.	Set RM and size ext;  Set SIGMA = sign of input.
-|		The k-factor is saved for use in d7. Clear the
-|		BINDEC_FLG for separating normalized/denormalized
-|		input.  If input is unnormalized or denormalized,
-|		normalize it.
-|
-|	A2.	Set X = abs(input).
-|
-|	A3.	Compute ILOG.
-|		ILOG is the log base 10 of the input value.  It is
-|		approximated by adding e + 0.f when the original
-|		value is viewed as 2^^e * 1.f in extended precision.
-|		This value is stored in d6.
-|
-|	A4.	Clr INEX bit.
-|		The operation in A3 above may have set INEX2.
-|
-|	A5.	Set ICTR = 0;
-|		ICTR is a flag used in A13.  It must be set before the
-|		loop entry A6.
-|
-|	A6.	Calculate LEN.
-|		LEN is the number of digits to be displayed.  The
-|		k-factor can dictate either the total number of digits,
-|		if it is a positive number, or the number of digits
-|		after the decimal point which are to be included as
-|		significant.  See the 68882 manual for examples.
-|		If LEN is computed to be greater than 17, set OPERR in
-|		USER_FPSR.  LEN is stored in d4.
-|
-|	A7.	Calculate SCALE.
-|		SCALE is equal to 10^ISCALE, where ISCALE is the number
-|		of decimal places needed to insure LEN integer digits
-|		in the output before conversion to bcd. LAMBDA is the
-|		sign of ISCALE, used in A9. Fp1 contains
-|		10^^(abs(ISCALE)) using a rounding mode which is a
-|		function of the original rounding mode and the signs
-|		of ISCALE and X.  A table is given in the code.
-|
-|	A8.	Clr INEX; Force RZ.
-|		The operation in A3 above may have set INEX2.
-|		RZ mode is forced for the scaling operation to insure
-|		only one rounding error.  The grs bits are collected in
-|		the INEX flag for use in A10.
-|
-|	A9.	Scale X -> Y.
-|		The mantissa is scaled to the desired number of
-|		significant digits.  The excess digits are collected
-|		in INEX2.
-|
-|	A10.	Or in INEX.
-|		If INEX is set, round error occurred.  This is
-|		compensated for by 'or-ing' in the INEX2 flag to
-|		the lsb of Y.
-|
-|	A11.	Restore original FPCR; set size ext.
-|		Perform FINT operation in the user's rounding mode.
-|		Keep the size to extended.
-|
-|	A12.	Calculate YINT = FINT(Y) according to user's rounding
-|		mode.  The FPSP routine sintd0 is used.  The output
-|		is in fp0.
-|
-|	A13.	Check for LEN digits.
-|		If the int operation results in more than LEN digits,
-|		or less than LEN -1 digits, adjust ILOG and repeat from
-|		A6.  This test occurs only on the first pass.  If the
-|		result is exactly 10^LEN, decrement ILOG and divide
-|		the mantissa by 10.
-|
-|	A14.	Convert the mantissa to bcd.
-|		The binstr routine is used to convert the LEN digit
-|		mantissa to bcd in memory.  The input to binstr is
-|		to be a fraction; i.e. (mantissa)/10^LEN and adjusted
-|		such that the decimal point is to the left of bit 63.
-|		The bcd digits are stored in the correct position in
-|		the final string area in memory.
-|
-|	A15.	Convert the exponent to bcd.
-|		As in A14 above, the exp is converted to bcd and the
-|		digits are stored in the final string.
-|		Test the length of the final exponent string.  If the
-|		length is 4, set operr.
-|
-|	A16.	Write sign bits to final string.
-|
-|	Implementation Notes:
-|
-|	The registers are used as follows:
-|
-|		d0: scratch; LEN input to binstr
-|		d1: scratch
-|		d2: upper 32-bits of mantissa for binstr
-|		d3: scratch;lower 32-bits of mantissa for binstr
-|		d4: LEN
-|		d5: LAMBDA/ICTR
-|		d6: ILOG
-|		d7: k-factor
-|		a0: ptr for original operand/final result
-|		a1: scratch pointer
-|		a2: pointer to FP_X; abs(original value) in ext
-|		fp0: scratch
-|		fp1: scratch
-|		fp2: scratch
-|		F_SCR1:
-|		F_SCR2:
-|		L_SCR1:
-|		L_SCR2:
-
-|		Copyright (C) Motorola, Inc. 1990
-|			All Rights Reserved
-|
-|       For details on the license for this file, please see the
-|       file, README, in this same directory.
-
-|BINDEC    idnt    2,1 | Motorola 040 Floating Point Software Package
-
-#include "fpsp.h"
-
-	|section	8
-
-| Constants in extended precision
-LOG2:	.long	0x3FFD0000,0x9A209A84,0xFBCFF798,0x00000000
-LOG2UP1:	.long	0x3FFD0000,0x9A209A84,0xFBCFF799,0x00000000
-
-| Constants in single precision
-FONE:	.long	0x3F800000,0x00000000,0x00000000,0x00000000
-FTWO:	.long	0x40000000,0x00000000,0x00000000,0x00000000
-FTEN:	.long	0x41200000,0x00000000,0x00000000,0x00000000
-F4933:	.long	0x459A2800,0x00000000,0x00000000,0x00000000
-
-RBDTBL:	.byte	0,0,0,0
-	.byte	3,3,2,2
-	.byte	3,2,2,3
-	.byte	2,3,3,2
-
-	|xref	binstr
-	|xref	sintdo
-	|xref	ptenrn,ptenrm,ptenrp
-
-	.global	bindec
-	.global	sc_mul
-bindec:
-	moveml	%d2-%d7/%a2,-(%a7)
-	fmovemx %fp0-%fp2,-(%a7)
-
-| A1. Set RM and size ext. Set SIGMA = sign input;
-|     The k-factor is saved for use in d7.  Clear BINDEC_FLG for
-|     separating  normalized/denormalized input.  If the input
-|     is a denormalized number, set the BINDEC_FLG memory word
-|     to signal denorm.  If the input is unnormalized, normalize
-|     the input and test for denormalized result.
-|
-	fmovel	#rm_mode,%FPCR	|set RM and ext
-	movel	(%a0),L_SCR2(%a6)	|save exponent for sign check
-	movel	%d0,%d7		|move k-factor to d7
-	clrb	BINDEC_FLG(%a6)	|clr norm/denorm flag
-	movew	STAG(%a6),%d0	|get stag
-	andiw	#0xe000,%d0	|isolate stag bits
-	beq	A2_str		|if zero, input is norm
-|
-| Normalize the denorm
-|
-un_de_norm:
-	movew	(%a0),%d0
-	andiw	#0x7fff,%d0	|strip sign of normalized exp
-	movel	4(%a0),%d1
-	movel	8(%a0),%d2
-norm_loop:
-	subw	#1,%d0
-	lsll	#1,%d2
-	roxll	#1,%d1
-	tstl	%d1
-	bges	norm_loop
-|
-| Test if the normalized input is denormalized
-|
-	tstw	%d0
-	bgts	pos_exp		|if greater than zero, it is a norm
-	st	BINDEC_FLG(%a6)	|set flag for denorm
-pos_exp:
-	andiw	#0x7fff,%d0	|strip sign of normalized exp
-	movew	%d0,(%a0)
-	movel	%d1,4(%a0)
-	movel	%d2,8(%a0)
-
-| A2. Set X = abs(input).
-|
-A2_str:
-	movel	(%a0),FP_SCR2(%a6) | move input to work space
-	movel	4(%a0),FP_SCR2+4(%a6) | move input to work space
-	movel	8(%a0),FP_SCR2+8(%a6) | move input to work space
-	andil	#0x7fffffff,FP_SCR2(%a6) |create abs(X)
-
-| A3. Compute ILOG.
-|     ILOG is the log base 10 of the input value.  It is approx-
-|     imated by adding e + 0.f when the original value is viewed
-|     as 2^^e * 1.f in extended precision.  This value is stored
-|     in d6.
-|
-| Register usage:
-|	Input/Output
-|	d0: k-factor/exponent
-|	d2: x/x
-|	d3: x/x
-|	d4: x/x
-|	d5: x/x
-|	d6: x/ILOG
-|	d7: k-factor/Unchanged
-|	a0: ptr for original operand/final result
-|	a1: x/x
-|	a2: x/x
-|	fp0: x/float(ILOG)
-|	fp1: x/x
-|	fp2: x/x
-|	F_SCR1:x/x
-|	F_SCR2:Abs(X)/Abs(X) with $3fff exponent
-|	L_SCR1:x/x
-|	L_SCR2:first word of X packed/Unchanged
-
-	tstb	BINDEC_FLG(%a6)	|check for denorm
-	beqs	A3_cont		|if clr, continue with norm
-	movel	#-4933,%d6	|force ILOG = -4933
-	bras	A4_str
-A3_cont:
-	movew	FP_SCR2(%a6),%d0	|move exp to d0
-	movew	#0x3fff,FP_SCR2(%a6) |replace exponent with 0x3fff
-	fmovex	FP_SCR2(%a6),%fp0	|now fp0 has 1.f
-	subw	#0x3fff,%d0	|strip off bias
-	faddw	%d0,%fp0		|add in exp
-	fsubs	FONE,%fp0	|subtract off 1.0
-	fbge	pos_res		|if pos, branch
-	fmulx	LOG2UP1,%fp0	|if neg, mul by LOG2UP1
-	fmovel	%fp0,%d6		|put ILOG in d6 as a lword
-	bras	A4_str		|go move out ILOG
-pos_res:
-	fmulx	LOG2,%fp0	|if pos, mul by LOG2
-	fmovel	%fp0,%d6		|put ILOG in d6 as a lword
-
-
-| A4. Clr INEX bit.
-|     The operation in A3 above may have set INEX2.
-
-A4_str:
-	fmovel	#0,%FPSR		|zero all of fpsr - nothing needed
-
-
-| A5. Set ICTR = 0;
-|     ICTR is a flag used in A13.  It must be set before the
-|     loop entry A6. The lower word of d5 is used for ICTR.
-
-	clrw	%d5		|clear ICTR
-
-
-| A6. Calculate LEN.
-|     LEN is the number of digits to be displayed.  The k-factor
-|     can dictate either the total number of digits, if it is
-|     a positive number, or the number of digits after the
-|     original decimal point which are to be included as
-|     significant.  See the 68882 manual for examples.
-|     If LEN is computed to be greater than 17, set OPERR in
-|     USER_FPSR.  LEN is stored in d4.
-|
-| Register usage:
-|	Input/Output
-|	d0: exponent/Unchanged
-|	d2: x/x/scratch
-|	d3: x/x
-|	d4: exc picture/LEN
-|	d5: ICTR/Unchanged
-|	d6: ILOG/Unchanged
-|	d7: k-factor/Unchanged
-|	a0: ptr for original operand/final result
-|	a1: x/x
-|	a2: x/x
-|	fp0: float(ILOG)/Unchanged
-|	fp1: x/x
-|	fp2: x/x
-|	F_SCR1:x/x
-|	F_SCR2:Abs(X) with $3fff exponent/Unchanged
-|	L_SCR1:x/x
-|	L_SCR2:first word of X packed/Unchanged
-
-A6_str:
-	tstl	%d7		|branch on sign of k
-	bles	k_neg		|if k <= 0, LEN = ILOG + 1 - k
-	movel	%d7,%d4		|if k > 0, LEN = k
-	bras	len_ck		|skip to LEN check
-k_neg:
-	movel	%d6,%d4		|first load ILOG to d4
-	subl	%d7,%d4		|subtract off k
-	addql	#1,%d4		|add in the 1
-len_ck:
-	tstl	%d4		|LEN check: branch on sign of LEN
-	bles	LEN_ng		|if neg, set LEN = 1
-	cmpl	#17,%d4		|test if LEN > 17
-	bles	A7_str		|if not, forget it
-	movel	#17,%d4		|set max LEN = 17
-	tstl	%d7		|if negative, never set OPERR
-	bles	A7_str		|if positive, continue
-	orl	#opaop_mask,USER_FPSR(%a6) |set OPERR & AIOP in USER_FPSR
-	bras	A7_str		|finished here
-LEN_ng:
-	moveql	#1,%d4		|min LEN is 1
-
-
-| A7. Calculate SCALE.
-|     SCALE is equal to 10^ISCALE, where ISCALE is the number
-|     of decimal places needed to insure LEN integer digits
-|     in the output before conversion to bcd. LAMBDA is the sign
-|     of ISCALE, used in A9.  Fp1 contains 10^^(abs(ISCALE)) using
-|     the rounding mode as given in the following table (see
-|     Coonen, p. 7.23 as ref.; however, the SCALE variable is
-|     of opposite sign in bindec.sa from Coonen).
-|
-|	Initial					USE
-|	FPCR[6:5]	LAMBDA	SIGN(X)		FPCR[6:5]
-|	----------------------------------------------
-|	 RN	00	   0	   0		00/0	RN
-|	 RN	00	   0	   1		00/0	RN
-|	 RN	00	   1	   0		00/0	RN
-|	 RN	00	   1	   1		00/0	RN
-|	 RZ	01	   0	   0		11/3	RP
-|	 RZ	01	   0	   1		11/3	RP
-|	 RZ	01	   1	   0		10/2	RM
-|	 RZ	01	   1	   1		10/2	RM
-|	 RM	10	   0	   0		11/3	RP
-|	 RM	10	   0	   1		10/2	RM
-|	 RM	10	   1	   0		10/2	RM
-|	 RM	10	   1	   1		11/3	RP
-|	 RP	11	   0	   0		10/2	RM
-|	 RP	11	   0	   1		11/3	RP
-|	 RP	11	   1	   0		11/3	RP
-|	 RP	11	   1	   1		10/2	RM
-|
-| Register usage:
-|	Input/Output
-|	d0: exponent/scratch - final is 0
-|	d2: x/0 or 24 for A9
-|	d3: x/scratch - offset ptr into PTENRM array
-|	d4: LEN/Unchanged
-|	d5: 0/ICTR:LAMBDA
-|	d6: ILOG/ILOG or k if ((k<=0)&(ILOG<k))
-|	d7: k-factor/Unchanged
-|	a0: ptr for original operand/final result
-|	a1: x/ptr to PTENRM array
-|	a2: x/x
-|	fp0: float(ILOG)/Unchanged
-|	fp1: x/10^ISCALE
-|	fp2: x/x
-|	F_SCR1:x/x
-|	F_SCR2:Abs(X) with $3fff exponent/Unchanged
-|	L_SCR1:x/x
-|	L_SCR2:first word of X packed/Unchanged
-
-A7_str:
-	tstl	%d7		|test sign of k
-	bgts	k_pos		|if pos and > 0, skip this
-	cmpl	%d6,%d7		|test k - ILOG
-	blts	k_pos		|if ILOG >= k, skip this
-	movel	%d7,%d6		|if ((k<0) & (ILOG < k)) ILOG = k
-k_pos:
-	movel	%d6,%d0		|calc ILOG + 1 - LEN in d0
-	addql	#1,%d0		|add the 1
-	subl	%d4,%d0		|sub off LEN
-	swap	%d5		|use upper word of d5 for LAMBDA
-	clrw	%d5		|set it zero initially
-	clrw	%d2		|set up d2 for very small case
-	tstl	%d0		|test sign of ISCALE
-	bges	iscale		|if pos, skip next inst
-	addqw	#1,%d5		|if neg, set LAMBDA true
-	cmpl	#0xffffecd4,%d0	|test iscale <= -4908
-	bgts	no_inf		|if false, skip rest
-	addil	#24,%d0		|add in 24 to iscale
-	movel	#24,%d2		|put 24 in d2 for A9
-no_inf:
-	negl	%d0		|and take abs of ISCALE
-iscale:
-	fmoves	FONE,%fp1	|init fp1 to 1
-	bfextu	USER_FPCR(%a6){#26:#2},%d1 |get initial rmode bits
-	lslw	#1,%d1		|put them in bits 2:1
-	addw	%d5,%d1		|add in LAMBDA
-	lslw	#1,%d1		|put them in bits 3:1
-	tstl	L_SCR2(%a6)	|test sign of original x
-	bges	x_pos		|if pos, don't set bit 0
-	addql	#1,%d1		|if neg, set bit 0
-x_pos:
-	leal	RBDTBL,%a2	|load rbdtbl base
-	moveb	(%a2,%d1),%d3	|load d3 with new rmode
-	lsll	#4,%d3		|put bits in proper position
-	fmovel	%d3,%fpcr		|load bits into fpu
-	lsrl	#4,%d3		|put bits in proper position
-	tstb	%d3		|decode new rmode for pten table
-	bnes	not_rn		|if zero, it is RN
-	leal	PTENRN,%a1	|load a1 with RN table base
-	bras	rmode		|exit decode
-not_rn:
-	lsrb	#1,%d3		|get lsb in carry
-	bccs	not_rp		|if carry clear, it is RM
-	leal	PTENRP,%a1	|load a1 with RP table base
-	bras	rmode		|exit decode
-not_rp:
-	leal	PTENRM,%a1	|load a1 with RM table base
-rmode:
-	clrl	%d3		|clr table index
-e_loop:
-	lsrl	#1,%d0		|shift next bit into carry
-	bccs	e_next		|if zero, skip the mul
-	fmulx	(%a1,%d3),%fp1	|mul by 10**(d3_bit_no)
-e_next:
-	addl	#12,%d3		|inc d3 to next pwrten table entry
-	tstl	%d0		|test if ISCALE is zero
-	bnes	e_loop		|if not, loop
-
-
-| A8. Clr INEX; Force RZ.
-|     The operation in A3 above may have set INEX2.
-|     RZ mode is forced for the scaling operation to insure
-|     only one rounding error.  The grs bits are collected in
-|     the INEX flag for use in A10.
-|
-| Register usage:
-|	Input/Output
-
-	fmovel	#0,%FPSR		|clr INEX
-	fmovel	#rz_mode,%FPCR	|set RZ rounding mode
-
-
-| A9. Scale X -> Y.
-|     The mantissa is scaled to the desired number of significant
-|     digits.  The excess digits are collected in INEX2. If mul,
-|     Check d2 for excess 10 exponential value.  If not zero,
-|     the iscale value would have caused the pwrten calculation
-|     to overflow.  Only a negative iscale can cause this, so
-|     multiply by 10^(d2), which is now only allowed to be 24,
-|     with a multiply by 10^8 and 10^16, which is exact since
-|     10^24 is exact.  If the input was denormalized, we must
-|     create a busy stack frame with the mul command and the
-|     two operands, and allow the fpu to complete the multiply.
-|
-| Register usage:
-|	Input/Output
-|	d0: FPCR with RZ mode/Unchanged
-|	d2: 0 or 24/unchanged
-|	d3: x/x
-|	d4: LEN/Unchanged
-|	d5: ICTR:LAMBDA
-|	d6: ILOG/Unchanged
-|	d7: k-factor/Unchanged
-|	a0: ptr for original operand/final result
-|	a1: ptr to PTENRM array/Unchanged
-|	a2: x/x
-|	fp0: float(ILOG)/X adjusted for SCALE (Y)
-|	fp1: 10^ISCALE/Unchanged
-|	fp2: x/x
-|	F_SCR1:x/x
-|	F_SCR2:Abs(X) with $3fff exponent/Unchanged
-|	L_SCR1:x/x
-|	L_SCR2:first word of X packed/Unchanged
-
-A9_str:
-	fmovex	(%a0),%fp0	|load X from memory
-	fabsx	%fp0		|use abs(X)
-	tstw	%d5		|LAMBDA is in lower word of d5
-	bne	sc_mul		|if neg (LAMBDA = 1), scale by mul
-	fdivx	%fp1,%fp0		|calculate X / SCALE -> Y to fp0
-	bras	A10_st		|branch to A10
-
-sc_mul:
-	tstb	BINDEC_FLG(%a6)	|check for denorm
-	beqs	A9_norm		|if norm, continue with mul
-	fmovemx %fp1-%fp1,-(%a7)	|load ETEMP with 10^ISCALE
-	movel	8(%a0),-(%a7)	|load FPTEMP with input arg
-	movel	4(%a0),-(%a7)
-	movel	(%a0),-(%a7)
-	movel	#18,%d3		|load count for busy stack
-A9_loop:
-	clrl	-(%a7)		|clear lword on stack
-	dbf	%d3,A9_loop
-	moveb	VER_TMP(%a6),(%a7) |write current version number
-	moveb	#BUSY_SIZE-4,1(%a7) |write current busy size
-	moveb	#0x10,0x44(%a7)	|set fcefpte[15] bit
-	movew	#0x0023,0x40(%a7)	|load cmdreg1b with mul command
-	moveb	#0xfe,0x8(%a7)	|load all 1s to cu savepc
-	frestore (%a7)+		|restore frame to fpu for completion
-	fmulx	36(%a1),%fp0	|multiply fp0 by 10^8
-	fmulx	48(%a1),%fp0	|multiply fp0 by 10^16
-	bras	A10_st
-A9_norm:
-	tstw	%d2		|test for small exp case
-	beqs	A9_con		|if zero, continue as normal
-	fmulx	36(%a1),%fp0	|multiply fp0 by 10^8
-	fmulx	48(%a1),%fp0	|multiply fp0 by 10^16
-A9_con:
-	fmulx	%fp1,%fp0		|calculate X * SCALE -> Y to fp0
-
-
-| A10. Or in INEX.
-|      If INEX is set, round error occurred.  This is compensated
-|      for by 'or-ing' in the INEX2 flag to the lsb of Y.
-|
-| Register usage:
-|	Input/Output
-|	d0: FPCR with RZ mode/FPSR with INEX2 isolated
-|	d2: x/x
-|	d3: x/x
-|	d4: LEN/Unchanged
-|	d5: ICTR:LAMBDA
-|	d6: ILOG/Unchanged
-|	d7: k-factor/Unchanged
-|	a0: ptr for original operand/final result
-|	a1: ptr to PTENxx array/Unchanged
-|	a2: x/ptr to FP_SCR2(a6)
-|	fp0: Y/Y with lsb adjusted
-|	fp1: 10^ISCALE/Unchanged
-|	fp2: x/x
-
-A10_st:
-	fmovel	%FPSR,%d0		|get FPSR
-	fmovex	%fp0,FP_SCR2(%a6)	|move Y to memory
-	leal	FP_SCR2(%a6),%a2	|load a2 with ptr to FP_SCR2
-	btstl	#9,%d0		|check if INEX2 set
-	beqs	A11_st		|if clear, skip rest
-	oril	#1,8(%a2)	|or in 1 to lsb of mantissa
-	fmovex	FP_SCR2(%a6),%fp0	|write adjusted Y back to fpu
-
-
-| A11. Restore original FPCR; set size ext.
-|      Perform FINT operation in the user's rounding mode.  Keep
-|      the size to extended.  The sintdo entry point in the sint
-|      routine expects the FPCR value to be in USER_FPCR for
-|      mode and precision.  The original FPCR is saved in L_SCR1.
-
-A11_st:
-	movel	USER_FPCR(%a6),L_SCR1(%a6) |save it for later
-	andil	#0x00000030,USER_FPCR(%a6) |set size to ext,
-|					;block exceptions
-
-
-| A12. Calculate YINT = FINT(Y) according to user's rounding mode.
-|      The FPSP routine sintd0 is used.  The output is in fp0.
-|
-| Register usage:
-|	Input/Output
-|	d0: FPSR with AINEX cleared/FPCR with size set to ext
-|	d2: x/x/scratch
-|	d3: x/x
-|	d4: LEN/Unchanged
-|	d5: ICTR:LAMBDA/Unchanged
-|	d6: ILOG/Unchanged
-|	d7: k-factor/Unchanged
-|	a0: ptr for original operand/src ptr for sintdo
-|	a1: ptr to PTENxx array/Unchanged
-|	a2: ptr to FP_SCR2(a6)/Unchanged
-|	a6: temp pointer to FP_SCR2(a6) - orig value saved and restored
-|	fp0: Y/YINT
-|	fp1: 10^ISCALE/Unchanged
-|	fp2: x/x
-|	F_SCR1:x/x
-|	F_SCR2:Y adjusted for inex/Y with original exponent
-|	L_SCR1:x/original USER_FPCR
-|	L_SCR2:first word of X packed/Unchanged
-
-A12_st:
-	moveml	%d0-%d1/%a0-%a1,-(%a7)	|save regs used by sintd0
-	movel	L_SCR1(%a6),-(%a7)
-	movel	L_SCR2(%a6),-(%a7)
-	leal	FP_SCR2(%a6),%a0		|a0 is ptr to F_SCR2(a6)
-	fmovex	%fp0,(%a0)		|move Y to memory at FP_SCR2(a6)
-	tstl	L_SCR2(%a6)		|test sign of original operand
-	bges	do_fint			|if pos, use Y
-	orl	#0x80000000,(%a0)		|if neg, use -Y
-do_fint:
-	movel	USER_FPSR(%a6),-(%a7)
-	bsr	sintdo			|sint routine returns int in fp0
-	moveb	(%a7),USER_FPSR(%a6)
-	addl	#4,%a7
-	movel	(%a7)+,L_SCR2(%a6)
-	movel	(%a7)+,L_SCR1(%a6)
-	moveml	(%a7)+,%d0-%d1/%a0-%a1	|restore regs used by sint
-	movel	L_SCR2(%a6),FP_SCR2(%a6)	|restore original exponent
-	movel	L_SCR1(%a6),USER_FPCR(%a6) |restore user's FPCR
-
-
-| A13. Check for LEN digits.
-|      If the int operation results in more than LEN digits,
-|      or less than LEN -1 digits, adjust ILOG and repeat from
-|      A6.  This test occurs only on the first pass.  If the
-|      result is exactly 10^LEN, decrement ILOG and divide
-|      the mantissa by 10.  The calculation of 10^LEN cannot
-|      be inexact, since all powers of ten up to 10^27 are exact
-|      in extended precision, so the use of a previous power-of-ten
-|      table will introduce no error.
-|
-|
-| Register usage:
-|	Input/Output
-|	d0: FPCR with size set to ext/scratch final = 0
-|	d2: x/x
-|	d3: x/scratch final = x
-|	d4: LEN/LEN adjusted
-|	d5: ICTR:LAMBDA/LAMBDA:ICTR
-|	d6: ILOG/ILOG adjusted
-|	d7: k-factor/Unchanged
-|	a0: pointer into memory for packed bcd string formation
-|	a1: ptr to PTENxx array/Unchanged
-|	a2: ptr to FP_SCR2(a6)/Unchanged
-|	fp0: int portion of Y/abs(YINT) adjusted
-|	fp1: 10^ISCALE/Unchanged
-|	fp2: x/10^LEN
-|	F_SCR1:x/x
-|	F_SCR2:Y with original exponent/Unchanged
-|	L_SCR1:original USER_FPCR/Unchanged
-|	L_SCR2:first word of X packed/Unchanged
-
-A13_st:
-	swap	%d5		|put ICTR in lower word of d5
-	tstw	%d5		|check if ICTR = 0
-	bne	not_zr		|if non-zero, go to second test
-|
-| Compute 10^(LEN-1)
-|
-	fmoves	FONE,%fp2	|init fp2 to 1.0
-	movel	%d4,%d0		|put LEN in d0
-	subql	#1,%d0		|d0 = LEN -1
-	clrl	%d3		|clr table index
-l_loop:
-	lsrl	#1,%d0		|shift next bit into carry
-	bccs	l_next		|if zero, skip the mul
-	fmulx	(%a1,%d3),%fp2	|mul by 10**(d3_bit_no)
-l_next:
-	addl	#12,%d3		|inc d3 to next pwrten table entry
-	tstl	%d0		|test if LEN is zero
-	bnes	l_loop		|if not, loop
-|
-| 10^LEN-1 is computed for this test and A14.  If the input was
-| denormalized, check only the case in which YINT > 10^LEN.
-|
-	tstb	BINDEC_FLG(%a6)	|check if input was norm
-	beqs	A13_con		|if norm, continue with checking
-	fabsx	%fp0		|take abs of YINT
-	bra	test_2
-|
-| Compare abs(YINT) to 10^(LEN-1) and 10^LEN
-|
-A13_con:
-	fabsx	%fp0		|take abs of YINT
-	fcmpx	%fp2,%fp0		|compare abs(YINT) with 10^(LEN-1)
-	fbge	test_2		|if greater, do next test
-	subql	#1,%d6		|subtract 1 from ILOG
-	movew	#1,%d5		|set ICTR
-	fmovel	#rm_mode,%FPCR	|set rmode to RM
-	fmuls	FTEN,%fp2	|compute 10^LEN
-	bra	A6_str		|return to A6 and recompute YINT
-test_2:
-	fmuls	FTEN,%fp2	|compute 10^LEN
-	fcmpx	%fp2,%fp0		|compare abs(YINT) with 10^LEN
-	fblt	A14_st		|if less, all is ok, go to A14
-	fbgt	fix_ex		|if greater, fix and redo
-	fdivs	FTEN,%fp0	|if equal, divide by 10
-	addql	#1,%d6		| and inc ILOG
-	bras	A14_st		| and continue elsewhere
-fix_ex:
-	addql	#1,%d6		|increment ILOG by 1
-	movew	#1,%d5		|set ICTR
-	fmovel	#rm_mode,%FPCR	|set rmode to RM
-	bra	A6_str		|return to A6 and recompute YINT
-|
-| Since ICTR <> 0, we have already been through one adjustment,
-| and shouldn't have another; this is to check if abs(YINT) = 10^LEN
-| 10^LEN is again computed using whatever table is in a1 since the
-| value calculated cannot be inexact.
-|
-not_zr:
-	fmoves	FONE,%fp2	|init fp2 to 1.0
-	movel	%d4,%d0		|put LEN in d0
-	clrl	%d3		|clr table index
-z_loop:
-	lsrl	#1,%d0		|shift next bit into carry
-	bccs	z_next		|if zero, skip the mul
-	fmulx	(%a1,%d3),%fp2	|mul by 10**(d3_bit_no)
-z_next:
-	addl	#12,%d3		|inc d3 to next pwrten table entry
-	tstl	%d0		|test if LEN is zero
-	bnes	z_loop		|if not, loop
-	fabsx	%fp0		|get abs(YINT)
-	fcmpx	%fp2,%fp0		|check if abs(YINT) = 10^LEN
-	fbne	A14_st		|if not, skip this
-	fdivs	FTEN,%fp0	|divide abs(YINT) by 10
-	addql	#1,%d6		|and inc ILOG by 1
-	addql	#1,%d4		| and inc LEN
-	fmuls	FTEN,%fp2	| if LEN++, the get 10^^LEN
-
-
-| A14. Convert the mantissa to bcd.
-|      The binstr routine is used to convert the LEN digit
-|      mantissa to bcd in memory.  The input to binstr is
-|      to be a fraction; i.e. (mantissa)/10^LEN and adjusted
-|      such that the decimal point is to the left of bit 63.
-|      The bcd digits are stored in the correct position in
-|      the final string area in memory.
-|
-|
-| Register usage:
-|	Input/Output
-|	d0: x/LEN call to binstr - final is 0
-|	d1: x/0
-|	d2: x/ms 32-bits of mant of abs(YINT)
-|	d3: x/ls 32-bits of mant of abs(YINT)
-|	d4: LEN/Unchanged
-|	d5: ICTR:LAMBDA/LAMBDA:ICTR
-|	d6: ILOG
-|	d7: k-factor/Unchanged
-|	a0: pointer into memory for packed bcd string formation
-|	    /ptr to first mantissa byte in result string
-|	a1: ptr to PTENxx array/Unchanged
-|	a2: ptr to FP_SCR2(a6)/Unchanged
-|	fp0: int portion of Y/abs(YINT) adjusted
-|	fp1: 10^ISCALE/Unchanged
-|	fp2: 10^LEN/Unchanged
-|	F_SCR1:x/Work area for final result
-|	F_SCR2:Y with original exponent/Unchanged
-|	L_SCR1:original USER_FPCR/Unchanged
-|	L_SCR2:first word of X packed/Unchanged
-
-A14_st:
-	fmovel	#rz_mode,%FPCR	|force rz for conversion
-	fdivx	%fp2,%fp0		|divide abs(YINT) by 10^LEN
-	leal	FP_SCR1(%a6),%a0
-	fmovex	%fp0,(%a0)	|move abs(YINT)/10^LEN to memory
-	movel	4(%a0),%d2	|move 2nd word of FP_RES to d2
-	movel	8(%a0),%d3	|move 3rd word of FP_RES to d3
-	clrl	4(%a0)		|zero word 2 of FP_RES
-	clrl	8(%a0)		|zero word 3 of FP_RES
-	movel	(%a0),%d0		|move exponent to d0
-	swap	%d0		|put exponent in lower word
-	beqs	no_sft		|if zero, don't shift
-	subil	#0x3ffd,%d0	|sub bias less 2 to make fract
-	tstl	%d0		|check if > 1
-	bgts	no_sft		|if so, don't shift
-	negl	%d0		|make exp positive
-m_loop:
-	lsrl	#1,%d2		|shift d2:d3 right, add 0s
-	roxrl	#1,%d3		|the number of places
-	dbf	%d0,m_loop	|given in d0
-no_sft:
-	tstl	%d2		|check for mantissa of zero
-	bnes	no_zr		|if not, go on
-	tstl	%d3		|continue zero check
-	beqs	zer_m		|if zero, go directly to binstr
-no_zr:
-	clrl	%d1		|put zero in d1 for addx
-	addil	#0x00000080,%d3	|inc at bit 7
-	addxl	%d1,%d2		|continue inc
-	andil	#0xffffff80,%d3	|strip off lsb not used by 882
-zer_m:
-	movel	%d4,%d0		|put LEN in d0 for binstr call
-	addql	#3,%a0		|a0 points to M16 byte in result
-	bsr	binstr		|call binstr to convert mant
-
-
-| A15. Convert the exponent to bcd.
-|      As in A14 above, the exp is converted to bcd and the
-|      digits are stored in the final string.
-|
-|      Digits are stored in L_SCR1(a6) on return from BINDEC as:
-|
-|	 32               16 15                0
-|	-----------------------------------------
-|	|  0 | e3 | e2 | e1 | e4 |  X |  X |  X |
-|	-----------------------------------------
-|
-| And are moved into their proper places in FP_SCR1.  If digit e4
-| is non-zero, OPERR is signaled.  In all cases, all 4 digits are
-| written as specified in the 881/882 manual for packed decimal.
-|
-| Register usage:
-|	Input/Output
-|	d0: x/LEN call to binstr - final is 0
-|	d1: x/scratch (0);shift count for final exponent packing
-|	d2: x/ms 32-bits of exp fraction/scratch
-|	d3: x/ls 32-bits of exp fraction
-|	d4: LEN/Unchanged
-|	d5: ICTR:LAMBDA/LAMBDA:ICTR
-|	d6: ILOG
-|	d7: k-factor/Unchanged
-|	a0: ptr to result string/ptr to L_SCR1(a6)
-|	a1: ptr to PTENxx array/Unchanged
-|	a2: ptr to FP_SCR2(a6)/Unchanged
-|	fp0: abs(YINT) adjusted/float(ILOG)
-|	fp1: 10^ISCALE/Unchanged
-|	fp2: 10^LEN/Unchanged
-|	F_SCR1:Work area for final result/BCD result
-|	F_SCR2:Y with original exponent/ILOG/10^4
-|	L_SCR1:original USER_FPCR/Exponent digits on return from binstr
-|	L_SCR2:first word of X packed/Unchanged
-
-A15_st:
-	tstb	BINDEC_FLG(%a6)	|check for denorm
-	beqs	not_denorm
-	ftstx	%fp0		|test for zero
-	fbeq	den_zero	|if zero, use k-factor or 4933
-	fmovel	%d6,%fp0		|float ILOG
-	fabsx	%fp0		|get abs of ILOG
-	bras	convrt
-den_zero:
-	tstl	%d7		|check sign of the k-factor
-	blts	use_ilog	|if negative, use ILOG
-	fmoves	F4933,%fp0	|force exponent to 4933
-	bras	convrt		|do it
-use_ilog:
-	fmovel	%d6,%fp0		|float ILOG
-	fabsx	%fp0		|get abs of ILOG
-	bras	convrt
-not_denorm:
-	ftstx	%fp0		|test for zero
-	fbne	not_zero	|if zero, force exponent
-	fmoves	FONE,%fp0	|force exponent to 1
-	bras	convrt		|do it
-not_zero:
-	fmovel	%d6,%fp0		|float ILOG
-	fabsx	%fp0		|get abs of ILOG
-convrt:
-	fdivx	24(%a1),%fp0	|compute ILOG/10^4
-	fmovex	%fp0,FP_SCR2(%a6)	|store fp0 in memory
-	movel	4(%a2),%d2	|move word 2 to d2
-	movel	8(%a2),%d3	|move word 3 to d3
-	movew	(%a2),%d0		|move exp to d0
-	beqs	x_loop_fin	|if zero, skip the shift
-	subiw	#0x3ffd,%d0	|subtract off bias
-	negw	%d0		|make exp positive
-x_loop:
-	lsrl	#1,%d2		|shift d2:d3 right
-	roxrl	#1,%d3		|the number of places
-	dbf	%d0,x_loop	|given in d0
-x_loop_fin:
-	clrl	%d1		|put zero in d1 for addx
-	addil	#0x00000080,%d3	|inc at bit 6
-	addxl	%d1,%d2		|continue inc
-	andil	#0xffffff80,%d3	|strip off lsb not used by 882
-	movel	#4,%d0		|put 4 in d0 for binstr call
-	leal	L_SCR1(%a6),%a0	|a0 is ptr to L_SCR1 for exp digits
-	bsr	binstr		|call binstr to convert exp
-	movel	L_SCR1(%a6),%d0	|load L_SCR1 lword to d0
-	movel	#12,%d1		|use d1 for shift count
-	lsrl	%d1,%d0		|shift d0 right by 12
-	bfins	%d0,FP_SCR1(%a6){#4:#12} |put e3:e2:e1 in FP_SCR1
-	lsrl	%d1,%d0		|shift d0 right by 12
-	bfins	%d0,FP_SCR1(%a6){#16:#4} |put e4 in FP_SCR1
-	tstb	%d0		|check if e4 is zero
-	beqs	A16_st		|if zero, skip rest
-	orl	#opaop_mask,USER_FPSR(%a6) |set OPERR & AIOP in USER_FPSR
-
-
-| A16. Write sign bits to final string.
-|	   Sigma is bit 31 of initial value; RHO is bit 31 of d6 (ILOG).
-|
-| Register usage:
-|	Input/Output
-|	d0: x/scratch - final is x
-|	d2: x/x
-|	d3: x/x
-|	d4: LEN/Unchanged
-|	d5: ICTR:LAMBDA/LAMBDA:ICTR
-|	d6: ILOG/ILOG adjusted
-|	d7: k-factor/Unchanged
-|	a0: ptr to L_SCR1(a6)/Unchanged
-|	a1: ptr to PTENxx array/Unchanged
-|	a2: ptr to FP_SCR2(a6)/Unchanged
-|	fp0: float(ILOG)/Unchanged
-|	fp1: 10^ISCALE/Unchanged
-|	fp2: 10^LEN/Unchanged
-|	F_SCR1:BCD result with correct signs
-|	F_SCR2:ILOG/10^4
-|	L_SCR1:Exponent digits on return from binstr
-|	L_SCR2:first word of X packed/Unchanged
-
-A16_st:
-	clrl	%d0		|clr d0 for collection of signs
-	andib	#0x0f,FP_SCR1(%a6) |clear first nibble of FP_SCR1
-	tstl	L_SCR2(%a6)	|check sign of original mantissa
-	bges	mant_p		|if pos, don't set SM
-	moveql	#2,%d0		|move 2 in to d0 for SM
-mant_p:
-	tstl	%d6		|check sign of ILOG
-	bges	wr_sgn		|if pos, don't set SE
-	addql	#1,%d0		|set bit 0 in d0 for SE
-wr_sgn:
-	bfins	%d0,FP_SCR1(%a6){#0:#2} |insert SM and SE into FP_SCR1
-
-| Clean up and restore all registers used.
-
-	fmovel	#0,%FPSR		|clear possible inex2/ainex bits
-	fmovemx (%a7)+,%fp0-%fp2
-	moveml	(%a7)+,%d2-%d7/%a2
-	rts
-
-	|end
diff --git a/ANDROID_3.4.5/arch/m68k/fpsp040/binstr.S b/ANDROID_3.4.5/arch/m68k/fpsp040/binstr.S
deleted file mode 100644
index 8a05ba92..00000000
--- a/ANDROID_3.4.5/arch/m68k/fpsp040/binstr.S
+++ /dev/null
@@ -1,139 +0,0 @@
-|
-|	binstr.sa 3.3 12/19/90
-|
-|
-|	Description: Converts a 64-bit binary integer to bcd.
-|
-|	Input: 64-bit binary integer in d2:d3, desired length (LEN) in
-|          d0, and a  pointer to start in memory for bcd characters
-|          in d0. (This pointer must point to byte 4 of the first
-|          lword of the packed decimal memory string.)
-|
-|	Output:	LEN bcd digits representing the 64-bit integer.
-|
-|	Algorithm:
-|		The 64-bit binary is assumed to have a decimal point before
-|		bit 63.  The fraction is multiplied by 10 using a mul by 2
-|		shift and a mul by 8 shift.  The bits shifted out of the
-|		msb form a decimal digit.  This process is iterated until
-|		LEN digits are formed.
-|
-|	A1. Init d7 to 1.  D7 is the byte digit counter, and if 1, the
-|		digit formed will be assumed the least significant.  This is
-|		to force the first byte formed to have a 0 in the upper 4 bits.
-|
-|	A2. Beginning of the loop:
-|		Copy the fraction in d2:d3 to d4:d5.
-|
-|	A3. Multiply the fraction in d2:d3 by 8 using bit-field
-|		extracts and shifts.  The three msbs from d2 will go into
-|		d1.
-|
-|	A4. Multiply the fraction in d4:d5 by 2 using shifts.  The msb
-|		will be collected by the carry.
-|
-|	A5. Add using the carry the 64-bit quantities in d2:d3 and d4:d5
-|		into d2:d3.  D1 will contain the bcd digit formed.
-|
-|	A6. Test d7.  If zero, the digit formed is the ms digit.  If non-
-|		zero, it is the ls digit.  Put the digit in its place in the
-|		upper word of d0.  If it is the ls digit, write the word
-|		from d0 to memory.
-|
-|	A7. Decrement d6 (LEN counter) and repeat the loop until zero.
-|
-|	Implementation Notes:
-|
-|	The registers are used as follows:
-|
-|		d0: LEN counter
-|		d1: temp used to form the digit
-|		d2: upper 32-bits of fraction for mul by 8
-|		d3: lower 32-bits of fraction for mul by 8
-|		d4: upper 32-bits of fraction for mul by 2
-|		d5: lower 32-bits of fraction for mul by 2
-|		d6: temp for bit-field extracts
-|		d7: byte digit formation word;digit count {0,1}
-|		a0: pointer into memory for packed bcd string formation
-|
-
-|		Copyright (C) Motorola, Inc. 1990
-|			All Rights Reserved
-|
-|       For details on the license for this file, please see the
-|       file, README, in this same directory.
-
-|BINSTR    idnt    2,1 | Motorola 040 Floating Point Software Package
-
-	|section	8
-
-#include "fpsp.h"
-
-	.global	binstr
-binstr:
-	moveml	%d0-%d7,-(%a7)
-|
-| A1: Init d7
-|
-	moveql	#1,%d7			|init d7 for second digit
-	subql	#1,%d0			|for dbf d0 would have LEN+1 passes
-|
-| A2. Copy d2:d3 to d4:d5.  Start loop.
-|
-loop:
-	movel	%d2,%d4			|copy the fraction before muls
-	movel	%d3,%d5			|to d4:d5
-|
-| A3. Multiply d2:d3 by 8; extract msbs into d1.
-|
-	bfextu	%d2{#0:#3},%d1		|copy 3 msbs of d2 into d1
-	asll	#3,%d2			|shift d2 left by 3 places
-	bfextu	%d3{#0:#3},%d6		|copy 3 msbs of d3 into d6
-	asll	#3,%d3			|shift d3 left by 3 places
-	orl	%d6,%d2			|or in msbs from d3 into d2
-|
-| A4. Multiply d4:d5 by 2; add carry out to d1.
-|
-	asll	#1,%d5			|mul d5 by 2
-	roxll	#1,%d4			|mul d4 by 2
-	swap	%d6			|put 0 in d6 lower word
-	addxw	%d6,%d1			|add in extend from mul by 2
-|
-| A5. Add mul by 8 to mul by 2.  D1 contains the digit formed.
-|
-	addl	%d5,%d3			|add lower 32 bits
-	nop				|ERRATA ; FIX #13 (Rev. 1.2 6/6/90)
-	addxl	%d4,%d2			|add with extend upper 32 bits
-	nop				|ERRATA ; FIX #13 (Rev. 1.2 6/6/90)
-	addxw	%d6,%d1			|add in extend from add to d1
-	swap	%d6			|with d6 = 0; put 0 in upper word
-|
-| A6. Test d7 and branch.
-|
-	tstw	%d7			|if zero, store digit & to loop
-	beqs	first_d			|if non-zero, form byte & write
-sec_d:
-	swap	%d7			|bring first digit to word d7b
-	aslw	#4,%d7			|first digit in upper 4 bits d7b
-	addw	%d1,%d7			|add in ls digit to d7b
-	moveb	%d7,(%a0)+		|store d7b byte in memory
-	swap	%d7			|put LEN counter in word d7a
-	clrw	%d7			|set d7a to signal no digits done
-	dbf	%d0,loop		|do loop some more!
-	bras	end_bstr		|finished, so exit
-first_d:
-	swap	%d7			|put digit word in d7b
-	movew	%d1,%d7			|put new digit in d7b
-	swap	%d7			|put LEN counter in word d7a
-	addqw	#1,%d7			|set d7a to signal first digit done
-	dbf	%d0,loop		|do loop some more!
-	swap	%d7			|put last digit in string
-	lslw	#4,%d7			|move it to upper 4 bits
-	moveb	%d7,(%a0)+		|store it in memory string
-|
-| Clean up and return with result in fp0.
-|
-end_bstr:
-	moveml	(%a7)+,%d0-%d7
-	rts
-	|end
diff --git a/ANDROID_3.4.5/arch/m68k/fpsp040/bugfix.S b/ANDROID_3.4.5/arch/m68k/fpsp040/bugfix.S
deleted file mode 100644
index 3bb9c84b..00000000
--- a/ANDROID_3.4.5/arch/m68k/fpsp040/bugfix.S
+++ /dev/null
@@ -1,495 +0,0 @@
-|
-|	bugfix.sa 3.2 1/31/91
-|
-|
-|	This file contains workarounds for bugs in the 040
-|	relating to the Floating-Point Software Package (FPSP)
-|
-|	Fixes for bugs: 1238
-|
-|	Bug: 1238
-|
-|
-|    /* The following dirty_bit clear should be left in
-|     * the handler permanently to improve throughput.
-|     * The dirty_bits are located at bits [23:16] in
-|     * longword $08 in the busy frame $4x60.  Bit 16
-|     * corresponds to FP0, bit 17 corresponds to FP1,
-|     * and so on.
-|     */
-|    if  (E3_exception_just_serviced)   {
-|         dirty_bit[cmdreg3b[9:7]] = 0;
-|         }
-|
-|    if  (fsave_format_version != $40)  {goto NOFIX}
-|
-|    if !(E3_exception_just_serviced)   {goto NOFIX}
-|    if  (cupc == 0000000)              {goto NOFIX}
-|    if  ((cmdreg1b[15:13] != 000) &&
-|         (cmdreg1b[15:10] != 010001))  {goto NOFIX}
-|    if (((cmdreg1b[15:13] != 000) || ((cmdreg1b[12:10] != cmdreg2b[9:7]) &&
-|				      (cmdreg1b[12:10] != cmdreg3b[9:7]))  ) &&
-|	 ((cmdreg1b[ 9: 7] != cmdreg2b[9:7]) &&
-|	  (cmdreg1b[ 9: 7] != cmdreg3b[9:7])) )  {goto NOFIX}
-|
-|    /* Note: for 6d43b or 8d43b, you may want to add the following code
-|     * to get better coverage.  (If you do not insert this code, the part
-|     * won't lock up; it will simply get the wrong answer.)
-|     * Do NOT insert this code for 10d43b or later parts.
-|     *
-|     *  if (fpiarcu == integer stack return address) {
-|     *       cupc = 0000000;
-|     *       goto NOFIX;
-|     *       }
-|     */
-|
-|    if (cmdreg1b[15:13] != 000)   {goto FIX_OPCLASS2}
-|    FIX_OPCLASS0:
-|    if (((cmdreg1b[12:10] == cmdreg2b[9:7]) ||
-|	 (cmdreg1b[ 9: 7] == cmdreg2b[9:7])) &&
-|	(cmdreg1b[12:10] != cmdreg3b[9:7]) &&
-|	(cmdreg1b[ 9: 7] != cmdreg3b[9:7]))  {  /* xu conflict only */
-|	/* We execute the following code if there is an
-|	   xu conflict and NOT an nu conflict */
-|
-|	/* first save some values on the fsave frame */
-|	stag_temp     = STAG[fsave_frame];
-|	cmdreg1b_temp = CMDREG1B[fsave_frame];
-|	dtag_temp     = DTAG[fsave_frame];
-|	ete15_temp    = ETE15[fsave_frame];
-|
-|	CUPC[fsave_frame] = 0000000;
-|	FRESTORE
-|	FSAVE
-|
-|	/* If the xu instruction is exceptional, we punt.
-|	 * Otherwise, we would have to include OVFL/UNFL handler
-|	 * code here to get the correct answer.
-|	 */
-|	if (fsave_frame_format == $4060) {goto KILL_PROCESS}
-|
-|	fsave_frame = /* build a long frame of all zeros */
-|	fsave_frame_format = $4060;  /* label it as long frame */
-|
-|	/* load it with the temps we saved */
-|	STAG[fsave_frame]     =  stag_temp;
-|	CMDREG1B[fsave_frame] =  cmdreg1b_temp;
-|	DTAG[fsave_frame]     =  dtag_temp;
-|	ETE15[fsave_frame]    =  ete15_temp;
-|
-|	/* Make sure that the cmdreg3b dest reg is not going to
-|	 * be destroyed by a FMOVEM at the end of all this code.
-|	 * If it is, you should move the current value of the reg
-|	 * onto the stack so that the reg will loaded with that value.
-|	 */
-|
-|	/* All done.  Proceed with the code below */
-|    }
-|
-|    etemp  = FP_reg_[cmdreg1b[12:10]];
-|    ete15  = ~ete14;
-|    cmdreg1b[15:10] = 010010;
-|    clear(bug_flag_procIDxxxx);
-|    FRESTORE and return;
-|
-|
-|    FIX_OPCLASS2:
-|    if ((cmdreg1b[9:7] == cmdreg2b[9:7]) &&
-|	(cmdreg1b[9:7] != cmdreg3b[9:7]))  {  /* xu conflict only */
-|	/* We execute the following code if there is an
-|	   xu conflict and NOT an nu conflict */
-|
-|	/* first save some values on the fsave frame */
-|	stag_temp     = STAG[fsave_frame];
-|	cmdreg1b_temp = CMDREG1B[fsave_frame];
-|	dtag_temp     = DTAG[fsave_frame];
-|	ete15_temp    = ETE15[fsave_frame];
-|	etemp_temp    = ETEMP[fsave_frame];
-|
-|	CUPC[fsave_frame] = 0000000;
-|	FRESTORE
-|	FSAVE
-|
-|
-|	/* If the xu instruction is exceptional, we punt.
-|	 * Otherwise, we would have to include OVFL/UNFL handler
-|	 * code here to get the correct answer.
-|	 */
-|	if (fsave_frame_format == $4060) {goto KILL_PROCESS}
-|
-|	fsave_frame = /* build a long frame of all zeros */
-|	fsave_frame_format = $4060;  /* label it as long frame */
-|
-|	/* load it with the temps we saved */
-|	STAG[fsave_frame]     =  stag_temp;
-|	CMDREG1B[fsave_frame] =  cmdreg1b_temp;
-|	DTAG[fsave_frame]     =  dtag_temp;
-|	ETE15[fsave_frame]    =  ete15_temp;
-|	ETEMP[fsave_frame]    =  etemp_temp;
-|
-|	/* Make sure that the cmdreg3b dest reg is not going to
-|	 * be destroyed by a FMOVEM at the end of all this code.
-|	 * If it is, you should move the current value of the reg
-|	 * onto the stack so that the reg will loaded with that value.
-|	 */
-|
-|	/* All done.  Proceed with the code below */
-|    }
-|
-|    if (etemp_exponent == min_sgl)   etemp_exponent = min_dbl;
-|    if (etemp_exponent == max_sgl)   etemp_exponent = max_dbl;
-|    cmdreg1b[15:10] = 010101;
-|    clear(bug_flag_procIDxxxx);
-|    FRESTORE and return;
-|
-|
-|    NOFIX:
-|    clear(bug_flag_procIDxxxx);
-|    FRESTORE and return;
-|
-
-
-|		Copyright (C) Motorola, Inc. 1990
-|			All Rights Reserved
-|
-|       For details on the license for this file, please see the
-|       file, README, in this same directory.
-
-|BUGFIX    idnt    2,1 | Motorola 040 Floating Point Software Package
-
-	|section	8
-
-#include "fpsp.h"
-
-	|xref	fpsp_fmt_error
-
-	.global	b1238_fix
-b1238_fix:
-|
-| This code is entered only on completion of the handling of an
-| nu-generated ovfl, unfl, or inex exception.  If the version
-| number of the fsave is not $40, this handler is not necessary.
-| Simply branch to fix_done and exit normally.
-|
-	cmpib	#VER_40,4(%a7)
-	bne	fix_done
-|
-| Test for cu_savepc equal to zero.  If not, this is not a bug
-| #1238 case.
-|
-	moveb	CU_SAVEPC(%a6),%d0
-	andib	#0xFE,%d0
-	beq	fix_done	|if zero, this is not bug #1238
-
-|
-| Test the register conflict aspect.  If opclass0, check for
-| cu src equal to xu dest or equal to nu dest.  If so, go to
-| op0.  Else, or if opclass2, check for cu dest equal to
-| xu dest or equal to nu dest.  If so, go to tst_opcl.  Else,
-| exit, it is not the bug case.
-|
-| Check for opclass 0.  If not, go and check for opclass 2 and sgl.
-|
-	movew	CMDREG1B(%a6),%d0
-	andiw	#0xE000,%d0		|strip all but opclass
-	bne	op2sgl			|not opclass 0, check op2
-|
-| Check for cu and nu register conflict.  If one exists, this takes
-| priority over a cu and xu conflict.
-|
-	bfextu	CMDREG1B(%a6){#3:#3},%d0	|get 1st src
-	bfextu	CMDREG3B(%a6){#6:#3},%d1	|get 3rd dest
-	cmpb	%d0,%d1
-	beqs	op0			|if equal, continue bugfix
-|
-| Check for cu dest equal to nu dest.  If so, go and fix the
-| bug condition.  Otherwise, exit.
-|
-	bfextu	CMDREG1B(%a6){#6:#3},%d0	|get 1st dest
-	cmpb	%d0,%d1			|cmp 1st dest with 3rd dest
-	beqs	op0			|if equal, continue bugfix
-|
-| Check for cu and xu register conflict.
-|
-	bfextu	CMDREG2B(%a6){#6:#3},%d1	|get 2nd dest
-	cmpb	%d0,%d1			|cmp 1st dest with 2nd dest
-	beqs	op0_xu			|if equal, continue bugfix
-	bfextu	CMDREG1B(%a6){#3:#3},%d0	|get 1st src
-	cmpb	%d0,%d1			|cmp 1st src with 2nd dest
-	beq	op0_xu
-	bne	fix_done		|if the reg checks fail, exit
-|
-| We have the opclass 0 situation.
-|
-op0:
-	bfextu	CMDREG1B(%a6){#3:#3},%d0	|get source register no
-	movel	#7,%d1
-	subl	%d0,%d1
-	clrl	%d0
-	bsetl	%d1,%d0
-	fmovemx %d0,ETEMP(%a6)		|load source to ETEMP
-
-	moveb	#0x12,%d0
-	bfins	%d0,CMDREG1B(%a6){#0:#6}	|opclass 2, extended
-|
-|	Set ETEMP exponent bit 15 as the opposite of ete14
-|
-	btst	#6,ETEMP_EX(%a6)		|check etemp exponent bit 14
-	beq	setete15
-	bclr	#etemp15_bit,STAG(%a6)
-	bra	finish
-setete15:
-	bset	#etemp15_bit,STAG(%a6)
-	bra	finish
-
-|
-| We have the case in which a conflict exists between the cu src or
-| dest and the dest of the xu.  We must clear the instruction in
-| the cu and restore the state, allowing the instruction in the
-| xu to complete.  Remember, the instruction in the nu
-| was exceptional, and was completed by the appropriate handler.
-| If the result of the xu instruction is not exceptional, we can
-| restore the instruction from the cu to the frame and continue
-| processing the original exception.  If the result is also
-| exceptional, we choose to kill the process.
-|
-|	Items saved from the stack:
-|
-|		$3c stag     - L_SCR1
-|		$40 cmdreg1b - L_SCR2
-|		$44 dtag     - L_SCR3
-|
-| The cu savepc is set to zero, and the frame is restored to the
-| fpu.
-|
-op0_xu:
-	movel	STAG(%a6),L_SCR1(%a6)
-	movel	CMDREG1B(%a6),L_SCR2(%a6)
-	movel	DTAG(%a6),L_SCR3(%a6)
-	andil	#0xe0000000,L_SCR3(%a6)
-	moveb	#0,CU_SAVEPC(%a6)
-	movel	(%a7)+,%d1		|save return address from bsr
-	frestore (%a7)+
-	fsave	-(%a7)
-|
-| Check if the instruction which just completed was exceptional.
-|
-	cmpw	#0x4060,(%a7)
-	beq	op0_xb
-|
-| It is necessary to isolate the result of the instruction in the
-| xu if it is to fp0 - fp3 and write that value to the USER_FPn
-| locations on the stack.  The correct destination register is in
-| cmdreg2b.
-|
-	bfextu	CMDREG2B(%a6){#6:#3},%d0	|get dest register no
-	cmpil	#3,%d0
-	bgts	op0_xi
-	beqs	op0_fp3
-	cmpil	#1,%d0
-	blts	op0_fp0
-	beqs	op0_fp1
-op0_fp2:
-	fmovemx %fp2-%fp2,USER_FP2(%a6)
-	bras	op0_xi
-op0_fp1:
-	fmovemx %fp1-%fp1,USER_FP1(%a6)
-	bras	op0_xi
-op0_fp0:
-	fmovemx %fp0-%fp0,USER_FP0(%a6)
-	bras	op0_xi
-op0_fp3:
-	fmovemx %fp3-%fp3,USER_FP3(%a6)
-|
-| The frame returned is idle.  We must build a busy frame to hold
-| the cu state information and setup etemp.
-|
-op0_xi:
-	movel	#22,%d0		|clear 23 lwords
-	clrl	(%a7)
-op0_loop:
-	clrl	-(%a7)
-	dbf	%d0,op0_loop
-	movel	#0x40600000,-(%a7)
-	movel	L_SCR1(%a6),STAG(%a6)
-	movel	L_SCR2(%a6),CMDREG1B(%a6)
-	movel	L_SCR3(%a6),DTAG(%a6)
-	moveb	#0x6,CU_SAVEPC(%a6)
-	movel	%d1,-(%a7)		|return bsr return address
-	bfextu	CMDREG1B(%a6){#3:#3},%d0	|get source register no
-	movel	#7,%d1
-	subl	%d0,%d1
-	clrl	%d0
-	bsetl	%d1,%d0
-	fmovemx %d0,ETEMP(%a6)		|load source to ETEMP
-
-	moveb	#0x12,%d0
-	bfins	%d0,CMDREG1B(%a6){#0:#6}	|opclass 2, extended
-|
-|	Set ETEMP exponent bit 15 as the opposite of ete14
-|
-	btst	#6,ETEMP_EX(%a6)		|check etemp exponent bit 14
-	beq	op0_sete15
-	bclr	#etemp15_bit,STAG(%a6)
-	bra	finish
-op0_sete15:
-	bset	#etemp15_bit,STAG(%a6)
-	bra	finish
-
-|
-| The frame returned is busy.  It is not possible to reconstruct
-| the code sequence to allow completion.  We will jump to
-| fpsp_fmt_error and allow the kernel to kill the process.
-|
-op0_xb:
-	jmp	fpsp_fmt_error
-
-|
-| Check for opclass 2 and single size.  If not both, exit.
-|
-op2sgl:
-	movew	CMDREG1B(%a6),%d0
-	andiw	#0xFC00,%d0		|strip all but opclass and size
-	cmpiw	#0x4400,%d0		|test for opclass 2 and size=sgl
-	bne	fix_done		|if not, it is not bug 1238
-|
-| Check for cu dest equal to nu dest or equal to xu dest, with
-| a cu and nu conflict taking priority an nu conflict.  If either,
-| go and fix the bug condition.  Otherwise, exit.
-|
-	bfextu	CMDREG1B(%a6){#6:#3},%d0	|get 1st dest
-	bfextu	CMDREG3B(%a6){#6:#3},%d1	|get 3rd dest
-	cmpb	%d0,%d1			|cmp 1st dest with 3rd dest
-	beq	op2_com			|if equal, continue bugfix
-	bfextu	CMDREG2B(%a6){#6:#3},%d1	|get 2nd dest
-	cmpb	%d0,%d1			|cmp 1st dest with 2nd dest
-	bne	fix_done		|if the reg checks fail, exit
-|
-| We have the case in which a conflict exists between the cu src or
-| dest and the dest of the xu.  We must clear the instruction in
-| the cu and restore the state, allowing the instruction in the
-| xu to complete.  Remember, the instruction in the nu
-| was exceptional, and was completed by the appropriate handler.
-| If the result of the xu instruction is not exceptional, we can
-| restore the instruction from the cu to the frame and continue
-| processing the original exception.  If the result is also
-| exceptional, we choose to kill the process.
-|
-|	Items saved from the stack:
-|
-|		$3c stag     - L_SCR1
-|		$40 cmdreg1b - L_SCR2
-|		$44 dtag     - L_SCR3
-|		etemp        - FP_SCR2
-|
-| The cu savepc is set to zero, and the frame is restored to the
-| fpu.
-|
-op2_xu:
-	movel	STAG(%a6),L_SCR1(%a6)
-	movel	CMDREG1B(%a6),L_SCR2(%a6)
-	movel	DTAG(%a6),L_SCR3(%a6)
-	andil	#0xe0000000,L_SCR3(%a6)
-	moveb	#0,CU_SAVEPC(%a6)
-	movel	ETEMP(%a6),FP_SCR2(%a6)
-	movel	ETEMP_HI(%a6),FP_SCR2+4(%a6)
-	movel	ETEMP_LO(%a6),FP_SCR2+8(%a6)
-	movel	(%a7)+,%d1		|save return address from bsr
-	frestore (%a7)+
-	fsave	-(%a7)
-|
-| Check if the instruction which just completed was exceptional.
-|
-	cmpw	#0x4060,(%a7)
-	beq	op2_xb
-|
-| It is necessary to isolate the result of the instruction in the
-| xu if it is to fp0 - fp3 and write that value to the USER_FPn
-| locations on the stack.  The correct destination register is in
-| cmdreg2b.
-|
-	bfextu	CMDREG2B(%a6){#6:#3},%d0	|get dest register no
-	cmpil	#3,%d0
-	bgts	op2_xi
-	beqs	op2_fp3
-	cmpil	#1,%d0
-	blts	op2_fp0
-	beqs	op2_fp1
-op2_fp2:
-	fmovemx %fp2-%fp2,USER_FP2(%a6)
-	bras	op2_xi
-op2_fp1:
-	fmovemx %fp1-%fp1,USER_FP1(%a6)
-	bras	op2_xi
-op2_fp0:
-	fmovemx %fp0-%fp0,USER_FP0(%a6)
-	bras	op2_xi
-op2_fp3:
-	fmovemx %fp3-%fp3,USER_FP3(%a6)
-|
-| The frame returned is idle.  We must build a busy frame to hold
-| the cu state information and fix up etemp.
-|
-op2_xi:
-	movel	#22,%d0		|clear 23 lwords
-	clrl	(%a7)
-op2_loop:
-	clrl	-(%a7)
-	dbf	%d0,op2_loop
-	movel	#0x40600000,-(%a7)
-	movel	L_SCR1(%a6),STAG(%a6)
-	movel	L_SCR2(%a6),CMDREG1B(%a6)
-	movel	L_SCR3(%a6),DTAG(%a6)
-	moveb	#0x6,CU_SAVEPC(%a6)
-	movel	FP_SCR2(%a6),ETEMP(%a6)
-	movel	FP_SCR2+4(%a6),ETEMP_HI(%a6)
-	movel	FP_SCR2+8(%a6),ETEMP_LO(%a6)
-	movel	%d1,-(%a7)
-	bra	op2_com
-
-|
-| We have the opclass 2 single source situation.
-|
-op2_com:
-	moveb	#0x15,%d0
-	bfins	%d0,CMDREG1B(%a6){#0:#6}	|opclass 2, double
-
-	cmpw	#0x407F,ETEMP_EX(%a6)	|single +max
-	bnes	case2
-	movew	#0x43FF,ETEMP_EX(%a6)	|to double +max
-	bra	finish
-case2:
-	cmpw	#0xC07F,ETEMP_EX(%a6)	|single -max
-	bnes	case3
-	movew	#0xC3FF,ETEMP_EX(%a6)	|to double -max
-	bra	finish
-case3:
-	cmpw	#0x3F80,ETEMP_EX(%a6)	|single +min
-	bnes	case4
-	movew	#0x3C00,ETEMP_EX(%a6)	|to double +min
-	bra	finish
-case4:
-	cmpw	#0xBF80,ETEMP_EX(%a6)	|single -min
-	bne	fix_done
-	movew	#0xBC00,ETEMP_EX(%a6)	|to double -min
-	bra	finish
-|
-| The frame returned is busy.  It is not possible to reconstruct
-| the code sequence to allow completion.  fpsp_fmt_error causes
-| an fline illegal instruction to be executed.
-|
-| You should replace the jump to fpsp_fmt_error with a jump
-| to the entry point used to kill a process.
-|
-op2_xb:
-	jmp	fpsp_fmt_error
-
-|
-| Enter here if the case is not of the situations affected by
-| bug #1238, or if the fix is completed, and exit.
-|
-finish:
-fix_done:
-	rts
-
-	|end
diff --git a/ANDROID_3.4.5/arch/m68k/fpsp040/decbin.S b/ANDROID_3.4.5/arch/m68k/fpsp040/decbin.S
deleted file mode 100644
index 16ed796b..00000000
--- a/ANDROID_3.4.5/arch/m68k/fpsp040/decbin.S
+++ /dev/null
@@ -1,505 +0,0 @@
-|
-|	decbin.sa 3.3 12/19/90
-|
-|	Description: Converts normalized packed bcd value pointed to by
-|	register A6 to extended-precision value in FP0.
-|
-|	Input: Normalized packed bcd value in ETEMP(a6).
-|
-|	Output:	Exact floating-point representation of the packed bcd value.
-|
-|	Saves and Modifies: D2-D5
-|
-|	Speed: The program decbin takes ??? cycles to execute.
-|
-|	Object Size:
-|
-|	External Reference(s): None.
-|
-|	Algorithm:
-|	Expected is a normal bcd (i.e. non-exceptional; all inf, zero,
-|	and NaN operands are dispatched without entering this routine)
-|	value in 68881/882 format at location ETEMP(A6).
-|
-|	A1.	Convert the bcd exponent to binary by successive adds and muls.
-|	Set the sign according to SE. Subtract 16 to compensate
-|	for the mantissa which is to be interpreted as 17 integer
-|	digits, rather than 1 integer and 16 fraction digits.
-|	Note: this operation can never overflow.
-|
-|	A2. Convert the bcd mantissa to binary by successive
-|	adds and muls in FP0. Set the sign according to SM.
-|	The mantissa digits will be converted with the decimal point
-|	assumed following the least-significant digit.
-|	Note: this operation can never overflow.
-|
-|	A3. Count the number of leading/trailing zeros in the
-|	bcd string.  If SE is positive, count the leading zeros;
-|	if negative, count the trailing zeros.  Set the adjusted
-|	exponent equal to the exponent from A1 and the zero count
-|	added if SM = 1 and subtracted if SM = 0.  Scale the
-|	mantissa the equivalent of forcing in the bcd value:
-|
-|	SM = 0	a non-zero digit in the integer position
-|	SM = 1	a non-zero digit in Mant0, lsd of the fraction
-|
-|	this will insure that any value, regardless of its
-|	representation (ex. 0.1E2, 1E1, 10E0, 100E-1), is converted
-|	consistently.
-|
-|	A4. Calculate the factor 10^exp in FP1 using a table of
-|	10^(2^n) values.  To reduce the error in forming factors
-|	greater than 10^27, a directed rounding scheme is used with
-|	tables rounded to RN, RM, and RP, according to the table
-|	in the comments of the pwrten section.
-|
-|	A5. Form the final binary number by scaling the mantissa by
-|	the exponent factor.  This is done by multiplying the
-|	mantissa in FP0 by the factor in FP1 if the adjusted
-|	exponent sign is positive, and dividing FP0 by FP1 if
-|	it is negative.
-|
-|	Clean up and return.  Check if the final mul or div resulted
-|	in an inex2 exception.  If so, set inex1 in the fpsr and
-|	check if the inex1 exception is enabled.  If so, set d7 upper
-|	word to $0100.  This will signal unimp.sa that an enabled inex1
-|	exception occurred.  Unimp will fix the stack.
-|
-
-|		Copyright (C) Motorola, Inc. 1990
-|			All Rights Reserved
-|
-|       For details on the license for this file, please see the
-|       file, README, in this same directory.
-
-|DECBIN    idnt    2,1 | Motorola 040 Floating Point Software Package
-
-	|section	8
-
-#include "fpsp.h"
-
-|
-|	PTENRN, PTENRM, and PTENRP are arrays of powers of 10 rounded
-|	to nearest, minus, and plus, respectively.  The tables include
-|	10**{1,2,4,8,16,32,64,128,256,512,1024,2048,4096}.  No rounding
-|	is required until the power is greater than 27, however, all
-|	tables include the first 5 for ease of indexing.
-|
-	|xref	PTENRN
-	|xref	PTENRM
-	|xref	PTENRP
-
-RTABLE:	.byte	0,0,0,0
-	.byte	2,3,2,3
-	.byte	2,3,3,2
-	.byte	3,2,2,3
-
-	.global	decbin
-	.global	calc_e
-	.global	pwrten
-	.global	calc_m
-	.global	norm
-	.global	ap_st_z
-	.global	ap_st_n
-|
-	.set	FNIBS,7
-	.set	FSTRT,0
-|
-	.set	ESTRT,4
-	.set	EDIGITS,2	|
-|
-| Constants in single precision
-FZERO:	.long	0x00000000
-FONE:	.long	0x3F800000
-FTEN:	.long	0x41200000
-
-	.set	TEN,10
-
-|
-decbin:
-	| fmovel	#0,FPCR		;clr real fpcr
-	moveml	%d2-%d5,-(%a7)
-|
-| Calculate exponent:
-|  1. Copy bcd value in memory for use as a working copy.
-|  2. Calculate absolute value of exponent in d1 by mul and add.
-|  3. Correct for exponent sign.
-|  4. Subtract 16 to compensate for interpreting the mant as all integer digits.
-|     (i.e., all digits assumed left of the decimal point.)
-|
-| Register usage:
-|
-|  calc_e:
-|	(*)  d0: temp digit storage
-|	(*)  d1: accumulator for binary exponent
-|	(*)  d2: digit count
-|	(*)  d3: offset pointer
-|	( )  d4: first word of bcd
-|	( )  a0: pointer to working bcd value
-|	( )  a6: pointer to original bcd value
-|	(*)  FP_SCR1: working copy of original bcd value
-|	(*)  L_SCR1: copy of original exponent word
-|
-calc_e:
-	movel	#EDIGITS,%d2	|# of nibbles (digits) in fraction part
-	moveql	#ESTRT,%d3	|counter to pick up digits
-	leal	FP_SCR1(%a6),%a0	|load tmp bcd storage address
-	movel	ETEMP(%a6),(%a0)	|save input bcd value
-	movel	ETEMP_HI(%a6),4(%a0) |save words 2 and 3
-	movel	ETEMP_LO(%a6),8(%a0) |and work with these
-	movel	(%a0),%d4	|get first word of bcd
-	clrl	%d1		|zero d1 for accumulator
-e_gd:
-	mulul	#TEN,%d1	|mul partial product by one digit place
-	bfextu	%d4{%d3:#4},%d0	|get the digit and zero extend into d0
-	addl	%d0,%d1		|d1 = d1 + d0
-	addqb	#4,%d3		|advance d3 to the next digit
-	dbf	%d2,e_gd	|if we have used all 3 digits, exit loop
-	btst	#30,%d4		|get SE
-	beqs	e_pos		|don't negate if pos
-	negl	%d1		|negate before subtracting
-e_pos:
-	subl	#16,%d1		|sub to compensate for shift of mant
-	bges	e_save		|if still pos, do not neg
-	negl	%d1		|now negative, make pos and set SE
-	orl	#0x40000000,%d4	|set SE in d4,
-	orl	#0x40000000,(%a0)	|and in working bcd
-e_save:
-	movel	%d1,L_SCR1(%a6)	|save exp in memory
-|
-|
-| Calculate mantissa:
-|  1. Calculate absolute value of mantissa in fp0 by mul and add.
-|  2. Correct for mantissa sign.
-|     (i.e., all digits assumed left of the decimal point.)
-|
-| Register usage:
-|
-|  calc_m:
-|	(*)  d0: temp digit storage
-|	(*)  d1: lword counter
-|	(*)  d2: digit count
-|	(*)  d3: offset pointer
-|	( )  d4: words 2 and 3 of bcd
-|	( )  a0: pointer to working bcd value
-|	( )  a6: pointer to original bcd value
-|	(*) fp0: mantissa accumulator
-|	( )  FP_SCR1: working copy of original bcd value
-|	( )  L_SCR1: copy of original exponent word
-|
-calc_m:
-	moveql	#1,%d1		|word counter, init to 1
-	fmoves	FZERO,%fp0	|accumulator
-|
-|
-|  Since the packed number has a long word between the first & second parts,
-|  get the integer digit then skip down & get the rest of the
-|  mantissa.  We will unroll the loop once.
-|
-	bfextu	(%a0){#28:#4},%d0	|integer part is ls digit in long word
-	faddb	%d0,%fp0		|add digit to sum in fp0
-|
-|
-|  Get the rest of the mantissa.
-|
-loadlw:
-	movel	(%a0,%d1.L*4),%d4	|load mantissa longword into d4
-	moveql	#FSTRT,%d3	|counter to pick up digits
-	moveql	#FNIBS,%d2	|reset number of digits per a0 ptr
-md2b:
-	fmuls	FTEN,%fp0	|fp0 = fp0 * 10
-	bfextu	%d4{%d3:#4},%d0	|get the digit and zero extend
-	faddb	%d0,%fp0	|fp0 = fp0 + digit
-|
-|
-|  If all the digits (8) in that long word have been converted (d2=0),
-|  then inc d1 (=2) to point to the next long word and reset d3 to 0
-|  to initialize the digit offset, and set d2 to 7 for the digit count;
-|  else continue with this long word.
-|
-	addqb	#4,%d3		|advance d3 to the next digit
-	dbf	%d2,md2b		|check for last digit in this lw
-nextlw:
-	addql	#1,%d1		|inc lw pointer in mantissa
-	cmpl	#2,%d1		|test for last lw
-	ble	loadlw		|if not, get last one
-
-|
-|  Check the sign of the mant and make the value in fp0 the same sign.
-|
-m_sign:
-	btst	#31,(%a0)	|test sign of the mantissa
-	beq	ap_st_z		|if clear, go to append/strip zeros
-	fnegx	%fp0		|if set, negate fp0
-
-|
-| Append/strip zeros:
-|
-|  For adjusted exponents which have an absolute value greater than 27*,
-|  this routine calculates the amount needed to normalize the mantissa
-|  for the adjusted exponent.  That number is subtracted from the exp
-|  if the exp was positive, and added if it was negative.  The purpose
-|  of this is to reduce the value of the exponent and the possibility
-|  of error in calculation of pwrten.
-|
-|  1. Branch on the sign of the adjusted exponent.
-|  2p.(positive exp)
-|   2. Check M16 and the digits in lwords 2 and 3 in descending order.
-|   3. Add one for each zero encountered until a non-zero digit.
-|   4. Subtract the count from the exp.
-|   5. Check if the exp has crossed zero in #3 above; make the exp abs
-|	   and set SE.
-|	6. Multiply the mantissa by 10**count.
-|  2n.(negative exp)
-|   2. Check the digits in lwords 3 and 2 in descending order.
-|   3. Add one for each zero encountered until a non-zero digit.
-|   4. Add the count to the exp.
-|   5. Check if the exp has crossed zero in #3 above; clear SE.
-|   6. Divide the mantissa by 10**count.
-|
-|  *Why 27?  If the adjusted exponent is within -28 < expA < 28, than
-|   any adjustment due to append/strip zeros will drive the resultant
-|   exponent towards zero.  Since all pwrten constants with a power
-|   of 27 or less are exact, there is no need to use this routine to
-|   attempt to lessen the resultant exponent.
-|
-| Register usage:
-|
-|  ap_st_z:
-|	(*)  d0: temp digit storage
-|	(*)  d1: zero count
-|	(*)  d2: digit count
-|	(*)  d3: offset pointer
-|	( )  d4: first word of bcd
-|	(*)  d5: lword counter
-|	( )  a0: pointer to working bcd value
-|	( )  FP_SCR1: working copy of original bcd value
-|	( )  L_SCR1: copy of original exponent word
-|
-|
-| First check the absolute value of the exponent to see if this
-| routine is necessary.  If so, then check the sign of the exponent
-| and do append (+) or strip (-) zeros accordingly.
-| This section handles a positive adjusted exponent.
-|
-ap_st_z:
-	movel	L_SCR1(%a6),%d1	|load expA for range test
-	cmpl	#27,%d1		|test is with 27
-	ble	pwrten		|if abs(expA) <28, skip ap/st zeros
-	btst	#30,(%a0)	|check sign of exp
-	bne	ap_st_n		|if neg, go to neg side
-	clrl	%d1		|zero count reg
-	movel	(%a0),%d4		|load lword 1 to d4
-	bfextu	%d4{#28:#4},%d0	|get M16 in d0
-	bnes	ap_p_fx		|if M16 is non-zero, go fix exp
-	addql	#1,%d1		|inc zero count
-	moveql	#1,%d5		|init lword counter
-	movel	(%a0,%d5.L*4),%d4	|get lword 2 to d4
-	bnes	ap_p_cl		|if lw 2 is zero, skip it
-	addql	#8,%d1		|and inc count by 8
-	addql	#1,%d5		|inc lword counter
-	movel	(%a0,%d5.L*4),%d4	|get lword 3 to d4
-ap_p_cl:
-	clrl	%d3		|init offset reg
-	moveql	#7,%d2		|init digit counter
-ap_p_gd:
-	bfextu	%d4{%d3:#4},%d0	|get digit
-	bnes	ap_p_fx		|if non-zero, go to fix exp
-	addql	#4,%d3		|point to next digit
-	addql	#1,%d1		|inc digit counter
-	dbf	%d2,ap_p_gd	|get next digit
-ap_p_fx:
-	movel	%d1,%d0		|copy counter to d2
-	movel	L_SCR1(%a6),%d1	|get adjusted exp from memory
-	subl	%d0,%d1		|subtract count from exp
-	bges	ap_p_fm		|if still pos, go to pwrten
-	negl	%d1		|now its neg; get abs
-	movel	(%a0),%d4		|load lword 1 to d4
-	orl	#0x40000000,%d4	| and set SE in d4
-	orl	#0x40000000,(%a0)	| and in memory
-|
-| Calculate the mantissa multiplier to compensate for the striping of
-| zeros from the mantissa.
-|
-ap_p_fm:
-	movel	#PTENRN,%a1	|get address of power-of-ten table
-	clrl	%d3		|init table index
-	fmoves	FONE,%fp1	|init fp1 to 1
-	moveql	#3,%d2		|init d2 to count bits in counter
-ap_p_el:
-	asrl	#1,%d0		|shift lsb into carry
-	bccs	ap_p_en		|if 1, mul fp1 by pwrten factor
-	fmulx	(%a1,%d3),%fp1	|mul by 10**(d3_bit_no)
-ap_p_en:
-	addl	#12,%d3		|inc d3 to next rtable entry
-	tstl	%d0		|check if d0 is zero
-	bnes	ap_p_el		|if not, get next bit
-	fmulx	%fp1,%fp0		|mul mantissa by 10**(no_bits_shifted)
-	bra	pwrten		|go calc pwrten
-|
-| This section handles a negative adjusted exponent.
-|
-ap_st_n:
-	clrl	%d1		|clr counter
-	moveql	#2,%d5		|set up d5 to point to lword 3
-	movel	(%a0,%d5.L*4),%d4	|get lword 3
-	bnes	ap_n_cl		|if not zero, check digits
-	subl	#1,%d5		|dec d5 to point to lword 2
-	addql	#8,%d1		|inc counter by 8
-	movel	(%a0,%d5.L*4),%d4	|get lword 2
-ap_n_cl:
-	movel	#28,%d3		|point to last digit
-	moveql	#7,%d2		|init digit counter
-ap_n_gd:
-	bfextu	%d4{%d3:#4},%d0	|get digit
-	bnes	ap_n_fx		|if non-zero, go to exp fix
-	subql	#4,%d3		|point to previous digit
-	addql	#1,%d1		|inc digit counter
-	dbf	%d2,ap_n_gd	|get next digit
-ap_n_fx:
-	movel	%d1,%d0		|copy counter to d0
-	movel	L_SCR1(%a6),%d1	|get adjusted exp from memory
-	subl	%d0,%d1		|subtract count from exp
-	bgts	ap_n_fm		|if still pos, go fix mantissa
-	negl	%d1		|take abs of exp and clr SE
-	movel	(%a0),%d4		|load lword 1 to d4
-	andl	#0xbfffffff,%d4	| and clr SE in d4
-	andl	#0xbfffffff,(%a0)	| and in memory
-|
-| Calculate the mantissa multiplier to compensate for the appending of
-| zeros to the mantissa.
-|
-ap_n_fm:
-	movel	#PTENRN,%a1	|get address of power-of-ten table
-	clrl	%d3		|init table index
-	fmoves	FONE,%fp1	|init fp1 to 1
-	moveql	#3,%d2		|init d2 to count bits in counter
-ap_n_el:
-	asrl	#1,%d0		|shift lsb into carry
-	bccs	ap_n_en		|if 1, mul fp1 by pwrten factor
-	fmulx	(%a1,%d3),%fp1	|mul by 10**(d3_bit_no)
-ap_n_en:
-	addl	#12,%d3		|inc d3 to next rtable entry
-	tstl	%d0		|check if d0 is zero
-	bnes	ap_n_el		|if not, get next bit
-	fdivx	%fp1,%fp0		|div mantissa by 10**(no_bits_shifted)
-|
-|
-| Calculate power-of-ten factor from adjusted and shifted exponent.
-|
-| Register usage:
-|
-|  pwrten:
-|	(*)  d0: temp
-|	( )  d1: exponent
-|	(*)  d2: {FPCR[6:5],SM,SE} as index in RTABLE; temp
-|	(*)  d3: FPCR work copy
-|	( )  d4: first word of bcd
-|	(*)  a1: RTABLE pointer
-|  calc_p:
-|	(*)  d0: temp
-|	( )  d1: exponent
-|	(*)  d3: PWRTxx table index
-|	( )  a0: pointer to working copy of bcd
-|	(*)  a1: PWRTxx pointer
-|	(*) fp1: power-of-ten accumulator
-|
-| Pwrten calculates the exponent factor in the selected rounding mode
-| according to the following table:
-|
-|	Sign of Mant  Sign of Exp  Rounding Mode  PWRTEN Rounding Mode
-|
-|	ANY	  ANY	RN	RN
-|
-|	 +	   +	RP	RP
-|	 -	   +	RP	RM
-|	 +	   -	RP	RM
-|	 -	   -	RP	RP
-|
-|	 +	   +	RM	RM
-|	 -	   +	RM	RP
-|	 +	   -	RM	RP
-|	 -	   -	RM	RM
-|
-|	 +	   +	RZ	RM
-|	 -	   +	RZ	RM
-|	 +	   -	RZ	RP
-|	 -	   -	RZ	RP
-|
-|
-pwrten:
-	movel	USER_FPCR(%a6),%d3 |get user's FPCR
-	bfextu	%d3{#26:#2},%d2	|isolate rounding mode bits
-	movel	(%a0),%d4		|reload 1st bcd word to d4
-	asll	#2,%d2		|format d2 to be
-	bfextu	%d4{#0:#2},%d0	| {FPCR[6],FPCR[5],SM,SE}
-	addl	%d0,%d2		|in d2 as index into RTABLE
-	leal	RTABLE,%a1	|load rtable base
-	moveb	(%a1,%d2),%d0	|load new rounding bits from table
-	clrl	%d3			|clear d3 to force no exc and extended
-	bfins	%d0,%d3{#26:#2}	|stuff new rounding bits in FPCR
-	fmovel	%d3,%FPCR		|write new FPCR
-	asrl	#1,%d0		|write correct PTENxx table
-	bccs	not_rp		|to a1
-	leal	PTENRP,%a1	|it is RP
-	bras	calc_p		|go to init section
-not_rp:
-	asrl	#1,%d0		|keep checking
-	bccs	not_rm
-	leal	PTENRM,%a1	|it is RM
-	bras	calc_p		|go to init section
-not_rm:
-	leal	PTENRN,%a1	|it is RN
-calc_p:
-	movel	%d1,%d0		|copy exp to d0;use d0
-	bpls	no_neg		|if exp is negative,
-	negl	%d0		|invert it
-	orl	#0x40000000,(%a0)	|and set SE bit
-no_neg:
-	clrl	%d3		|table index
-	fmoves	FONE,%fp1	|init fp1 to 1
-e_loop:
-	asrl	#1,%d0		|shift next bit into carry
-	bccs	e_next		|if zero, skip the mul
-	fmulx	(%a1,%d3),%fp1	|mul by 10**(d3_bit_no)
-e_next:
-	addl	#12,%d3		|inc d3 to next rtable entry
-	tstl	%d0		|check if d0 is zero
-	bnes	e_loop		|not zero, continue shifting
-|
-|
-|  Check the sign of the adjusted exp and make the value in fp0 the
-|  same sign. If the exp was pos then multiply fp1*fp0;
-|  else divide fp0/fp1.
-|
-| Register Usage:
-|  norm:
-|	( )  a0: pointer to working bcd value
-|	(*) fp0: mantissa accumulator
-|	( ) fp1: scaling factor - 10**(abs(exp))
-|
-norm:
-	btst	#30,(%a0)	|test the sign of the exponent
-	beqs	mul		|if clear, go to multiply
-div:
-	fdivx	%fp1,%fp0		|exp is negative, so divide mant by exp
-	bras	end_dec
-mul:
-	fmulx	%fp1,%fp0		|exp is positive, so multiply by exp
-|
-|
-| Clean up and return with result in fp0.
-|
-| If the final mul/div in decbin incurred an inex exception,
-| it will be inex2, but will be reported as inex1 by get_op.
-|
-end_dec:
-	fmovel	%FPSR,%d0		|get status register
-	bclrl	#inex2_bit+8,%d0	|test for inex2 and clear it
-	fmovel	%d0,%FPSR		|return status reg w/o inex2
-	beqs	no_exc		|skip this if no exc
-	orl	#inx1a_mask,USER_FPSR(%a6) |set inex1/ainex
-no_exc:
-	moveml	(%a7)+,%d2-%d5
-	rts
-	|end
diff --git a/ANDROID_3.4.5/arch/m68k/fpsp040/do_func.S b/ANDROID_3.4.5/arch/m68k/fpsp040/do_func.S
deleted file mode 100644
index 3eff99a8..00000000
--- a/ANDROID_3.4.5/arch/m68k/fpsp040/do_func.S
+++ /dev/null
@@ -1,558 +0,0 @@
-|
-|	do_func.sa 3.4 2/18/91
-|
-| Do_func performs the unimplemented operation.  The operation
-| to be performed is determined from the lower 7 bits of the
-| extension word (except in the case of fmovecr and fsincos).
-| The opcode and tag bits form an index into a jump table in
-| tbldo.sa.  Cases of zero, infinity and NaN are handled in
-| do_func by forcing the default result.  Normalized and
-| denormalized (there are no unnormalized numbers at this
-| point) are passed onto the emulation code.
-|
-| CMDREG1B and STAG are extracted from the fsave frame
-| and combined to form the table index.  The function called
-| will start with a0 pointing to the ETEMP operand.  Dyadic
-| functions can find FPTEMP at -12(a0).
-|
-| Called functions return their result in fp0.  Sincos returns
-| sin(x) in fp0 and cos(x) in fp1.
-|
-
-|		Copyright (C) Motorola, Inc. 1990
-|			All Rights Reserved
-|
-|       For details on the license for this file, please see the
-|       file, README, in this same directory.
-
-DO_FUNC:	|idnt    2,1 | Motorola 040 Floating Point Software Package
-
-	|section	8
-
-#include "fpsp.h"
-
-	|xref	t_dz2
-	|xref	t_operr
-	|xref	t_inx2
-	|xref	t_resdnrm
-	|xref	dst_nan
-	|xref	src_nan
-	|xref	nrm_set
-	|xref	sto_cos
-
-	|xref	tblpre
-	|xref	slognp1,slogn,slog10,slog2
-	|xref	slognd,slog10d,slog2d
-	|xref	smod,srem
-	|xref	sscale
-	|xref	smovcr
-
-PONE:	.long	0x3fff0000,0x80000000,0x00000000	|+1
-MONE:	.long	0xbfff0000,0x80000000,0x00000000	|-1
-PZERO:	.long	0x00000000,0x00000000,0x00000000	|+0
-MZERO:	.long	0x80000000,0x00000000,0x00000000	|-0
-PINF:	.long	0x7fff0000,0x00000000,0x00000000	|+inf
-MINF:	.long	0xffff0000,0x00000000,0x00000000	|-inf
-QNAN:	.long	0x7fff0000,0xffffffff,0xffffffff	|non-signaling nan
-PPIBY2:  .long	0x3FFF0000,0xC90FDAA2,0x2168C235	|+PI/2
-MPIBY2:  .long	0xbFFF0000,0xC90FDAA2,0x2168C235	|-PI/2
-
-	.global	do_func
-do_func:
-	clrb	CU_ONLY(%a6)
-|
-| Check for fmovecr.  It does not follow the format of fp gen
-| unimplemented instructions.  The test is on the upper 6 bits;
-| if they are $17, the inst is fmovecr.  Call entry smovcr
-| directly.
-|
-	bfextu	CMDREG1B(%a6){#0:#6},%d0 |get opclass and src fields
-	cmpil	#0x17,%d0		|if op class and size fields are $17,
-|				;it is FMOVECR; if not, continue
-	bnes	not_fmovecr
-	jmp	smovcr		|fmovecr; jmp directly to emulation
-
-not_fmovecr:
-	movew	CMDREG1B(%a6),%d0
-	andl	#0x7F,%d0
-	cmpil	#0x38,%d0		|if the extension is >= $38,
-	bge	serror		|it is illegal
-	bfextu	STAG(%a6){#0:#3},%d1
-	lsll	#3,%d0		|make room for STAG
-	addl	%d1,%d0		|combine for final index into table
-	leal	tblpre,%a1	|start of monster jump table
-	movel	(%a1,%d0.w*4),%a1	|real target address
-	leal	ETEMP(%a6),%a0	|a0 is pointer to src op
-	movel	USER_FPCR(%a6),%d1
-	andl	#0xFF,%d1		| discard all but rounding mode/prec
-	fmovel	#0,%fpcr
-	jmp	(%a1)
-|
-|	ERROR
-|
-	.global	serror
-serror:
-	st	STORE_FLG(%a6)
-	rts
-|
-| These routines load forced values into fp0.  They are called
-| by index into tbldo.
-|
-| Load a signed zero to fp0 and set inex2/ainex
-|
-	.global	snzrinx
-snzrinx:
-	btstb	#sign_bit,LOCAL_EX(%a0)	|get sign of source operand
-	bnes	ld_mzinx	|if negative, branch
-	bsr	ld_pzero	|bsr so we can return and set inx
-	bra	t_inx2		|now, set the inx for the next inst
-ld_mzinx:
-	bsr	ld_mzero	|if neg, load neg zero, return here
-	bra	t_inx2		|now, set the inx for the next inst
-|
-| Load a signed zero to fp0; do not set inex2/ainex
-|
-	.global	szero
-szero:
-	btstb	#sign_bit,LOCAL_EX(%a0) |get sign of source operand
-	bne	ld_mzero	|if neg, load neg zero
-	bra	ld_pzero	|load positive zero
-|
-| Load a signed infinity to fp0; do not set inex2/ainex
-|
-	.global	sinf
-sinf:
-	btstb	#sign_bit,LOCAL_EX(%a0)	|get sign of source operand
-	bne	ld_minf			|if negative branch
-	bra	ld_pinf
-|
-| Load a signed one to fp0; do not set inex2/ainex
-|
-	.global	sone
-sone:
-	btstb	#sign_bit,LOCAL_EX(%a0)	|check sign of source
-	bne	ld_mone
-	bra	ld_pone
-|
-| Load a signed pi/2 to fp0; do not set inex2/ainex
-|
-	.global	spi_2
-spi_2:
-	btstb	#sign_bit,LOCAL_EX(%a0)	|check sign of source
-	bne	ld_mpi2
-	bra	ld_ppi2
-|
-| Load either a +0 or +inf for plus/minus operand
-|
-	.global	szr_inf
-szr_inf:
-	btstb	#sign_bit,LOCAL_EX(%a0)	|check sign of source
-	bne	ld_pzero
-	bra	ld_pinf
-|
-| Result is either an operr or +inf for plus/minus operand
-| [Used by slogn, slognp1, slog10, and slog2]
-|
-	.global	sopr_inf
-sopr_inf:
-	btstb	#sign_bit,LOCAL_EX(%a0)	|check sign of source
-	bne	t_operr
-	bra	ld_pinf
-|
-|	FLOGNP1
-|
-	.global	sslognp1
-sslognp1:
-	fmovemx (%a0),%fp0-%fp0
-	fcmpb	#-1,%fp0
-	fbgt	slognp1
-	fbeq	t_dz2		|if = -1, divide by zero exception
-	fmovel	#0,%FPSR		|clr N flag
-	bra	t_operr		|take care of operands < -1
-|
-|	FETOXM1
-|
-	.global	setoxm1i
-setoxm1i:
-	btstb	#sign_bit,LOCAL_EX(%a0)	|check sign of source
-	bne	ld_mone
-	bra	ld_pinf
-|
-|	FLOGN
-|
-| Test for 1.0 as an input argument, returning +zero.  Also check
-| the sign and return operr if negative.
-|
-	.global	sslogn
-sslogn:
-	btstb	#sign_bit,LOCAL_EX(%a0)
-	bne	t_operr		|take care of operands < 0
-	cmpiw	#0x3fff,LOCAL_EX(%a0) |test for 1.0 input
-	bne	slogn
-	cmpil	#0x80000000,LOCAL_HI(%a0)
-	bne	slogn
-	tstl	LOCAL_LO(%a0)
-	bne	slogn
-	fmovex	PZERO,%fp0
-	rts
-
-	.global	sslognd
-sslognd:
-	btstb	#sign_bit,LOCAL_EX(%a0)
-	beq	slognd
-	bra	t_operr		|take care of operands < 0
-
-|
-|	FLOG10
-|
-	.global	sslog10
-sslog10:
-	btstb	#sign_bit,LOCAL_EX(%a0)
-	bne	t_operr		|take care of operands < 0
-	cmpiw	#0x3fff,LOCAL_EX(%a0) |test for 1.0 input
-	bne	slog10
-	cmpil	#0x80000000,LOCAL_HI(%a0)
-	bne	slog10
-	tstl	LOCAL_LO(%a0)
-	bne	slog10
-	fmovex	PZERO,%fp0
-	rts
-
-	.global	sslog10d
-sslog10d:
-	btstb	#sign_bit,LOCAL_EX(%a0)
-	beq	slog10d
-	bra	t_operr		|take care of operands < 0
-
-|
-|	FLOG2
-|
-	.global	sslog2
-sslog2:
-	btstb	#sign_bit,LOCAL_EX(%a0)
-	bne	t_operr		|take care of operands < 0
-	cmpiw	#0x3fff,LOCAL_EX(%a0) |test for 1.0 input
-	bne	slog2
-	cmpil	#0x80000000,LOCAL_HI(%a0)
-	bne	slog2
-	tstl	LOCAL_LO(%a0)
-	bne	slog2
-	fmovex	PZERO,%fp0
-	rts
-
-	.global	sslog2d
-sslog2d:
-	btstb	#sign_bit,LOCAL_EX(%a0)
-	beq	slog2d
-	bra	t_operr		|take care of operands < 0
-
-|
-|	FMOD
-|
-pmodt:
-|				;$21 fmod
-|				;dtag,stag
-	.long	smod		|  00,00  norm,norm = normal
-	.long	smod_oper	|  00,01  norm,zero = nan with operr
-	.long	smod_fpn	|  00,10  norm,inf  = fpn
-	.long	smod_snan	|  00,11  norm,nan  = nan
-	.long	smod_zro	|  01,00  zero,norm = +-zero
-	.long	smod_oper	|  01,01  zero,zero = nan with operr
-	.long	smod_zro	|  01,10  zero,inf  = +-zero
-	.long	smod_snan	|  01,11  zero,nan  = nan
-	.long	smod_oper	|  10,00  inf,norm  = nan with operr
-	.long	smod_oper	|  10,01  inf,zero  = nan with operr
-	.long	smod_oper	|  10,10  inf,inf   = nan with operr
-	.long	smod_snan	|  10,11  inf,nan   = nan
-	.long	smod_dnan	|  11,00  nan,norm  = nan
-	.long	smod_dnan	|  11,01  nan,zero  = nan
-	.long	smod_dnan	|  11,10  nan,inf   = nan
-	.long	smod_dnan	|  11,11  nan,nan   = nan
-
-	.global	pmod
-pmod:
-	clrb	FPSR_QBYTE(%a6) | clear quotient field
-	bfextu	STAG(%a6){#0:#3},%d0 |stag = d0
-	bfextu	DTAG(%a6){#0:#3},%d1 |dtag = d1
-
-|
-| Alias extended denorms to norms for the jump table.
-|
-	bclrl	#2,%d0
-	bclrl	#2,%d1
-
-	lslb	#2,%d1
-	orb	%d0,%d1		|d1{3:2} = dtag, d1{1:0} = stag
-|				;Tag values:
-|				;00 = norm or denorm
-|				;01 = zero
-|				;10 = inf
-|				;11 = nan
-	lea	pmodt,%a1
-	movel	(%a1,%d1.w*4),%a1
-	jmp	(%a1)
-
-smod_snan:
-	bra	src_nan
-smod_dnan:
-	bra	dst_nan
-smod_oper:
-	bra	t_operr
-smod_zro:
-	moveb	ETEMP(%a6),%d1	|get sign of src op
-	moveb	FPTEMP(%a6),%d0	|get sign of dst op
-	eorb	%d0,%d1		|get exor of sign bits
-	btstl	#7,%d1		|test for sign
-	beqs	smod_zsn	|if clr, do not set sign big
-	bsetb	#q_sn_bit,FPSR_QBYTE(%a6) |set q-byte sign bit
-smod_zsn:
-	btstl	#7,%d0		|test if + or -
-	beq	ld_pzero	|if pos then load +0
-	bra	ld_mzero	|else neg load -0
-
-smod_fpn:
-	moveb	ETEMP(%a6),%d1	|get sign of src op
-	moveb	FPTEMP(%a6),%d0	|get sign of dst op
-	eorb	%d0,%d1		|get exor of sign bits
-	btstl	#7,%d1		|test for sign
-	beqs	smod_fsn	|if clr, do not set sign big
-	bsetb	#q_sn_bit,FPSR_QBYTE(%a6) |set q-byte sign bit
-smod_fsn:
-	tstb	DTAG(%a6)	|filter out denormal destination case
-	bpls	smod_nrm	|
-	leal	FPTEMP(%a6),%a0	|a0<- addr(FPTEMP)
-	bra	t_resdnrm	|force UNFL(but exact) result
-smod_nrm:
-	fmovel USER_FPCR(%a6),%fpcr |use user's rmode and precision
-	fmovex FPTEMP(%a6),%fp0	|return dest to fp0
-	rts
-
-|
-|	FREM
-|
-premt:
-|				;$25 frem
-|				;dtag,stag
-	.long	srem		|  00,00  norm,norm = normal
-	.long	srem_oper	|  00,01  norm,zero = nan with operr
-	.long	srem_fpn	|  00,10  norm,inf  = fpn
-	.long	srem_snan	|  00,11  norm,nan  = nan
-	.long	srem_zro	|  01,00  zero,norm = +-zero
-	.long	srem_oper	|  01,01  zero,zero = nan with operr
-	.long	srem_zro	|  01,10  zero,inf  = +-zero
-	.long	srem_snan	|  01,11  zero,nan  = nan
-	.long	srem_oper	|  10,00  inf,norm  = nan with operr
-	.long	srem_oper	|  10,01  inf,zero  = nan with operr
-	.long	srem_oper	|  10,10  inf,inf   = nan with operr
-	.long	srem_snan	|  10,11  inf,nan   = nan
-	.long	srem_dnan	|  11,00  nan,norm  = nan
-	.long	srem_dnan	|  11,01  nan,zero  = nan
-	.long	srem_dnan	|  11,10  nan,inf   = nan
-	.long	srem_dnan	|  11,11  nan,nan   = nan
-
-	.global	prem
-prem:
-	clrb	FPSR_QBYTE(%a6)   |clear quotient field
-	bfextu	STAG(%a6){#0:#3},%d0 |stag = d0
-	bfextu	DTAG(%a6){#0:#3},%d1 |dtag = d1
-|
-| Alias extended denorms to norms for the jump table.
-|
-	bclr	#2,%d0
-	bclr	#2,%d1
-
-	lslb	#2,%d1
-	orb	%d0,%d1		|d1{3:2} = dtag, d1{1:0} = stag
-|				;Tag values:
-|				;00 = norm or denorm
-|				;01 = zero
-|				;10 = inf
-|				;11 = nan
-	lea	premt,%a1
-	movel	(%a1,%d1.w*4),%a1
-	jmp	(%a1)
-
-srem_snan:
-	bra	src_nan
-srem_dnan:
-	bra	dst_nan
-srem_oper:
-	bra	t_operr
-srem_zro:
-	moveb	ETEMP(%a6),%d1	|get sign of src op
-	moveb	FPTEMP(%a6),%d0	|get sign of dst op
-	eorb	%d0,%d1		|get exor of sign bits
-	btstl	#7,%d1		|test for sign
-	beqs	srem_zsn	|if clr, do not set sign big
-	bsetb	#q_sn_bit,FPSR_QBYTE(%a6) |set q-byte sign bit
-srem_zsn:
-	btstl	#7,%d0		|test if + or -
-	beq	ld_pzero	|if pos then load +0
-	bra	ld_mzero	|else neg load -0
-
-srem_fpn:
-	moveb	ETEMP(%a6),%d1	|get sign of src op
-	moveb	FPTEMP(%a6),%d0	|get sign of dst op
-	eorb	%d0,%d1		|get exor of sign bits
-	btstl	#7,%d1		|test for sign
-	beqs	srem_fsn	|if clr, do not set sign big
-	bsetb	#q_sn_bit,FPSR_QBYTE(%a6) |set q-byte sign bit
-srem_fsn:
-	tstb	DTAG(%a6)	|filter out denormal destination case
-	bpls	srem_nrm	|
-	leal	FPTEMP(%a6),%a0	|a0<- addr(FPTEMP)
-	bra	t_resdnrm	|force UNFL(but exact) result
-srem_nrm:
-	fmovel USER_FPCR(%a6),%fpcr |use user's rmode and precision
-	fmovex FPTEMP(%a6),%fp0	|return dest to fp0
-	rts
-|
-|	FSCALE
-|
-pscalet:
-|				;$26 fscale
-|				;dtag,stag
-	.long	sscale		|  00,00  norm,norm = result
-	.long	sscale		|  00,01  norm,zero = fpn
-	.long	scl_opr		|  00,10  norm,inf  = nan with operr
-	.long	scl_snan	|  00,11  norm,nan  = nan
-	.long	scl_zro		|  01,00  zero,norm = +-zero
-	.long	scl_zro		|  01,01  zero,zero = +-zero
-	.long	scl_opr		|  01,10  zero,inf  = nan with operr
-	.long	scl_snan	|  01,11  zero,nan  = nan
-	.long	scl_inf		|  10,00  inf,norm  = +-inf
-	.long	scl_inf		|  10,01  inf,zero  = +-inf
-	.long	scl_opr		|  10,10  inf,inf   = nan with operr
-	.long	scl_snan	|  10,11  inf,nan   = nan
-	.long	scl_dnan	|  11,00  nan,norm  = nan
-	.long	scl_dnan	|  11,01  nan,zero  = nan
-	.long	scl_dnan	|  11,10  nan,inf   = nan
-	.long	scl_dnan	|  11,11  nan,nan   = nan
-
-	.global	pscale
-pscale:
-	bfextu	STAG(%a6){#0:#3},%d0 |stag in d0
-	bfextu	DTAG(%a6){#0:#3},%d1 |dtag in d1
-	bclrl	#2,%d0		|alias  denorm into norm
-	bclrl	#2,%d1		|alias  denorm into norm
-	lslb	#2,%d1
-	orb	%d0,%d1		|d1{4:2} = dtag, d1{1:0} = stag
-|				;dtag values     stag values:
-|				;000 = norm      00 = norm
-|				;001 = zero	 01 = zero
-|				;010 = inf	 10 = inf
-|				;011 = nan	 11 = nan
-|				;100 = dnrm
-|
-|
-	leal	pscalet,%a1	|load start of jump table
-	movel	(%a1,%d1.w*4),%a1	|load a1 with label depending on tag
-	jmp	(%a1)		|go to the routine
-
-scl_opr:
-	bra	t_operr
-
-scl_dnan:
-	bra	dst_nan
-
-scl_zro:
-	btstb	#sign_bit,FPTEMP_EX(%a6)	|test if + or -
-	beq	ld_pzero		|if pos then load +0
-	bra	ld_mzero		|if neg then load -0
-scl_inf:
-	btstb	#sign_bit,FPTEMP_EX(%a6)	|test if + or -
-	beq	ld_pinf			|if pos then load +inf
-	bra	ld_minf			|else neg load -inf
-scl_snan:
-	bra	src_nan
-|
-|	FSINCOS
-|
-	.global	ssincosz
-ssincosz:
-	btstb	#sign_bit,ETEMP(%a6)	|get sign
-	beqs	sincosp
-	fmovex	MZERO,%fp0
-	bras	sincoscom
-sincosp:
-	fmovex PZERO,%fp0
-sincoscom:
-	fmovemx PONE,%fp1-%fp1	|do not allow FPSR to be affected
-	bra	sto_cos		|store cosine result
-
-	.global	ssincosi
-ssincosi:
-	fmovex QNAN,%fp1	|load NAN
-	bsr	sto_cos		|store cosine result
-	fmovex QNAN,%fp0	|load NAN
-	bra	t_operr
-
-	.global	ssincosnan
-ssincosnan:
-	movel	ETEMP_EX(%a6),FP_SCR1(%a6)
-	movel	ETEMP_HI(%a6),FP_SCR1+4(%a6)
-	movel	ETEMP_LO(%a6),FP_SCR1+8(%a6)
-	bsetb	#signan_bit,FP_SCR1+4(%a6)
-	fmovemx FP_SCR1(%a6),%fp1-%fp1
-	bsr	sto_cos
-	bra	src_nan
-|
-| This code forces default values for the zero, inf, and nan cases
-| in the transcendentals code.  The CC bits must be set in the
-| stacked FPSR to be correctly reported.
-|
-|**Returns +PI/2
-	.global	ld_ppi2
-ld_ppi2:
-	fmovex PPIBY2,%fp0		|load +pi/2
-	bra	t_inx2			|set inex2 exc
-
-|**Returns -PI/2
-	.global	ld_mpi2
-ld_mpi2:
-	fmovex MPIBY2,%fp0		|load -pi/2
-	orl	#neg_mask,USER_FPSR(%a6)	|set N bit
-	bra	t_inx2			|set inex2 exc
-
-|**Returns +inf
-	.global	ld_pinf
-ld_pinf:
-	fmovex PINF,%fp0		|load +inf
-	orl	#inf_mask,USER_FPSR(%a6)	|set I bit
-	rts
-
-|**Returns -inf
-	.global	ld_minf
-ld_minf:
-	fmovex MINF,%fp0		|load -inf
-	orl	#neg_mask+inf_mask,USER_FPSR(%a6)	|set N and I bits
-	rts
-
-|**Returns +1
-	.global	ld_pone
-ld_pone:
-	fmovex PONE,%fp0		|load +1
-	rts
-
-|**Returns -1
-	.global	ld_mone
-ld_mone:
-	fmovex MONE,%fp0		|load -1
-	orl	#neg_mask,USER_FPSR(%a6)	|set N bit
-	rts
-
-|**Returns +0
-	.global	ld_pzero
-ld_pzero:
-	fmovex PZERO,%fp0		|load +0
-	orl	#z_mask,USER_FPSR(%a6)	|set Z bit
-	rts
-
-|**Returns -0
-	.global	ld_mzero
-ld_mzero:
-	fmovex MZERO,%fp0		|load -0
-	orl	#neg_mask+z_mask,USER_FPSR(%a6)	|set N and Z bits
-	rts
-
-	|end
diff --git a/ANDROID_3.4.5/arch/m68k/fpsp040/fpsp.h b/ANDROID_3.4.5/arch/m68k/fpsp040/fpsp.h
deleted file mode 100644
index 5df4cd77..00000000
--- a/ANDROID_3.4.5/arch/m68k/fpsp040/fpsp.h
+++ /dev/null
@@ -1,347 +0,0 @@
-|
-|	fpsp.h 3.3 3.3
-|
-
-|		Copyright (C) Motorola, Inc. 1990
-|			All Rights Reserved
-|
-|       For details on the license for this file, please see the
-|       file, README, in this same directory.
-
-|	fpsp.h --- stack frame offsets during FPSP exception handling
-|
-|	These equates are used to access the exception frame, the fsave
-|	frame and any local variables needed by the FPSP package.
-|
-|	All FPSP handlers begin by executing:
-|
-|		link	a6,#-LOCAL_SIZE
-|		fsave	-(a7)
-|		movem.l	d0-d1/a0-a1,USER_DA(a6)
-|		fmovem.x fp0-fp3,USER_FP0(a6)
-|		fmove.l	fpsr/fpcr/fpiar,USER_FPSR(a6)
-|
-|	After initialization, the stack looks like this:
-|
-|	A7 --->	+-------------------------------+
-|		|				|
-|		|	FPU fsave area		|
-|		|				|
-|		+-------------------------------+
-|		|				|
-|		|	FPSP Local Variables	|
-|		|	     including		|
-|		|	  saved registers	|
-|		|				|
-|		+-------------------------------+
-|	A6 --->	|	Saved A6		|
-|		+-------------------------------+
-|		|				|
-|		|	Exception Frame		|
-|		|				|
-|		|				|
-|
-|	Positive offsets from A6 refer to the exception frame.  Negative
-|	offsets refer to the Local Variable area and the fsave area.
-|	The fsave frame is also accessible from the top via A7.
-|
-|	On exit, the handlers execute:
-|
-|		movem.l	USER_DA(a6),d0-d1/a0-a1
-|		fmovem.x USER_FP0(a6),fp0-fp3
-|		fmove.l	USER_FPSR(a6),fpsr/fpcr/fpiar
-|		frestore (a7)+
-|		unlk	a6
-|
-|	and then either "bra fpsp_done" if the exception was completely
-|	handled	by the package, or "bra real_xxxx" which is an external
-|	label to a routine that will process a real exception of the
-|	type that was generated.  Some handlers may omit the "frestore"
-|	if the FPU state after the exception is idle.
-|
-|	Sometimes the exception handler will transform the fsave area
-|	because it needs to report an exception back to the user.  This
-|	can happen if the package is entered for an unimplemented float
-|	instruction that generates (say) an underflow.  Alternatively,
-|	a second fsave frame can be pushed onto the stack and the
-|	handler	exit code will reload the new frame and discard the old.
-|
-|	The registers d0, d1, a0, a1 and fp0-fp3 are always saved and
-|	restored from the "local variable" area and can be used as
-|	temporaries.  If a routine needs to change any
-|	of these registers, it should modify the saved copy and let
-|	the handler exit code restore the value.
-|
-|----------------------------------------------------------------------
-|
-|	Local Variables on the stack
-|
-	.set	LOCAL_SIZE,192		| bytes needed for local variables
-	.set	LV,-LOCAL_SIZE	| convenient base value
-|
-	.set	USER_DA,LV+0		| save space for D0-D1,A0-A1
-	.set	USER_D0,LV+0		| saved user D0
-	.set	USER_D1,LV+4		| saved user D1
-	.set	USER_A0,LV+8		| saved user A0
-	.set	USER_A1,LV+12		| saved user A1
-	.set	USER_FP0,LV+16		| saved user FP0
-	.set	USER_FP1,LV+28		| saved user FP1
-	.set	USER_FP2,LV+40		| saved user FP2
-	.set	USER_FP3,LV+52		| saved user FP3
-	.set	USER_FPCR,LV+64		| saved user FPCR
-	.set	FPCR_ENABLE,USER_FPCR+2	|	FPCR exception enable
-	.set	FPCR_MODE,USER_FPCR+3	|	FPCR rounding mode control
-	.set	USER_FPSR,LV+68		| saved user FPSR
-	.set	FPSR_CC,USER_FPSR+0	|	FPSR condition code
-	.set	FPSR_QBYTE,USER_FPSR+1	|	FPSR quotient
-	.set	FPSR_EXCEPT,USER_FPSR+2	|	FPSR exception
-	.set	FPSR_AEXCEPT,USER_FPSR+3	|	FPSR accrued exception
-	.set	USER_FPIAR,LV+72		| saved user FPIAR
-	.set	FP_SCR1,LV+76		| room for a temporary float value
-	.set	FP_SCR2,LV+92		| room for a temporary float value
-	.set	L_SCR1,LV+108		| room for a temporary long value
-	.set	L_SCR2,LV+112		| room for a temporary long value
-	.set	STORE_FLG,LV+116
-	.set	BINDEC_FLG,LV+117		| used in bindec
-	.set	DNRM_FLG,LV+118		| used in res_func
-	.set	RES_FLG,LV+119		| used in res_func
-	.set	DY_MO_FLG,LV+120		| dyadic/monadic flag
-	.set	UFLG_TMP,LV+121		| temporary for uflag errata
-	.set	CU_ONLY,LV+122		| cu-only flag
-	.set	VER_TMP,LV+123		| temp holding for version number
-	.set	L_SCR3,LV+124		| room for a temporary long value
-	.set	FP_SCR3,LV+128		| room for a temporary float value
-	.set	FP_SCR4,LV+144		| room for a temporary float value
-	.set	FP_SCR5,LV+160		| room for a temporary float value
-	.set	FP_SCR6,LV+176
-|
-|NEXT		equ	LV+192		;need to increase LOCAL_SIZE
-|
-|--------------------------------------------------------------------------
-|
-|	fsave offsets and bit definitions
-|
-|	Offsets are defined from the end of an fsave because the last 10
-|	words of a busy frame are the same as the unimplemented frame.
-|
-	.set	CU_SAVEPC,LV-92		| micro-pc for CU (1 byte)
-	.set	FPR_DIRTY_BITS,LV-91		| fpr dirty bits
-|
-	.set	WBTEMP,LV-76		| write back temp (12 bytes)
-	.set	WBTEMP_EX,WBTEMP		| wbtemp sign and exponent (2 bytes)
-	.set	WBTEMP_HI,WBTEMP+4	| wbtemp mantissa [63:32] (4 bytes)
-	.set	WBTEMP_LO,WBTEMP+8	| wbtemp mantissa [31:00] (4 bytes)
-|
-	.set	WBTEMP_SGN,WBTEMP+2	| used to store sign
-|
-	.set	FPSR_SHADOW,LV-64		| fpsr shadow reg
-|
-	.set	FPIARCU,LV-60		| Instr. addr. reg. for CU (4 bytes)
-|
-	.set	CMDREG2B,LV-52		| cmd reg for machine 2
-	.set	CMDREG3B,LV-48		| cmd reg for E3 exceptions (2 bytes)
-|
-	.set	NMNEXC,LV-44		| NMNEXC (unsup,snan bits only)
-	.set	nmn_unsup_bit,1	|
-	.set	nmn_snan_bit,0	|
-|
-	.set	NMCEXC,LV-43		| NMNEXC & NMCEXC
-	.set	nmn_operr_bit,7
-	.set	nmn_ovfl_bit,6
-	.set	nmn_unfl_bit,5
-	.set	nmc_unsup_bit,4
-	.set	nmc_snan_bit,3
-	.set	nmc_operr_bit,2
-	.set	nmc_ovfl_bit,1
-	.set	nmc_unfl_bit,0
-|
-	.set	STAG,LV-40		| source tag (1 byte)
-	.set	WBTEMP_GRS,LV-40		| alias wbtemp guard, round, sticky
-	.set	guard_bit,1		| guard bit is bit number 1
-	.set	round_bit,0		| round bit is bit number 0
-	.set	stag_mask,0xE0		| upper 3 bits are source tag type
-	.set	denorm_bit,7		| bit determines if denorm or unnorm
-	.set	etemp15_bit,4		| etemp exponent bit #15
-	.set	wbtemp66_bit,2		| wbtemp mantissa bit #66
-	.set	wbtemp1_bit,1		| wbtemp mantissa bit #1
-	.set	wbtemp0_bit,0		| wbtemp mantissa bit #0
-|
-	.set	STICKY,LV-39		| holds sticky bit
-	.set	sticky_bit,7
-|
-	.set	CMDREG1B,LV-36		| cmd reg for E1 exceptions (2 bytes)
-	.set	kfact_bit,12		| distinguishes static/dynamic k-factor
-|					;on packed move outs.  NOTE: this
-|					;equate only works when CMDREG1B is in
-|					;a register.
-|
-	.set	CMDWORD,LV-35		| command word in cmd1b
-	.set	direction_bit,5		| bit 0 in opclass
-	.set	size_bit2,12		| bit 2 in size field
-|
-	.set	DTAG,LV-32		| dest tag (1 byte)
-	.set	dtag_mask,0xE0		| upper 3 bits are dest type tag
-	.set	fptemp15_bit,4		| fptemp exponent bit #15
-|
-	.set	WB_BYTE,LV-31		| holds WBTE15 bit (1 byte)
-	.set	wbtemp15_bit,4		| wbtemp exponent bit #15
-|
-	.set	E_BYTE,LV-28		| holds E1 and E3 bits (1 byte)
-	.set	E1,2		| which bit is E1 flag
-	.set	E3,1		| which bit is E3 flag
-	.set	SFLAG,0		| which bit is S flag
-|
-	.set	T_BYTE,LV-27		| holds T and U bits (1 byte)
-	.set	XFLAG,7		| which bit is X flag
-	.set	UFLAG,5		| which bit is U flag
-	.set	TFLAG,4		| which bit is T flag
-|
-	.set	FPTEMP,LV-24		| fptemp (12 bytes)
-	.set	FPTEMP_EX,FPTEMP		| fptemp sign and exponent (2 bytes)
-	.set	FPTEMP_HI,FPTEMP+4	| fptemp mantissa [63:32] (4 bytes)
-	.set	FPTEMP_LO,FPTEMP+8	| fptemp mantissa [31:00] (4 bytes)
-|
-	.set	FPTEMP_SGN,FPTEMP+2	| used to store sign
-|
-	.set	ETEMP,LV-12		| etemp (12 bytes)
-	.set	ETEMP_EX,ETEMP		| etemp sign and exponent (2 bytes)
-	.set	ETEMP_HI,ETEMP+4		| etemp mantissa [63:32] (4 bytes)
-	.set	ETEMP_LO,ETEMP+8		| etemp mantissa [31:00] (4 bytes)
-|
-	.set	ETEMP_SGN,ETEMP+2		| used to store sign
-|
-	.set	EXC_SR,4		| exception frame status register
-	.set	EXC_PC,6		| exception frame program counter
-	.set	EXC_VEC,10		| exception frame vector (format+vector#)
-	.set	EXC_EA,12		| exception frame effective address
-|
-|--------------------------------------------------------------------------
-|
-|	FPSR/FPCR bits
-|
-	.set	neg_bit,3	|  negative result
-	.set	z_bit,2	|  zero result
-	.set	inf_bit,1	|  infinity result
-	.set	nan_bit,0	|  not-a-number result
-|
-	.set	q_sn_bit,7	|  sign bit of quotient byte
-|
-	.set	bsun_bit,7	|  branch on unordered
-	.set	snan_bit,6	|  signalling nan
-	.set	operr_bit,5	|  operand error
-	.set	ovfl_bit,4	|  overflow
-	.set	unfl_bit,3	|  underflow
-	.set	dz_bit,2	|  divide by zero
-	.set	inex2_bit,1	|  inexact result 2
-	.set	inex1_bit,0	|  inexact result 1
-|
-	.set	aiop_bit,7	|  accrued illegal operation
-	.set	aovfl_bit,6	|  accrued overflow
-	.set	aunfl_bit,5	|  accrued underflow
-	.set	adz_bit,4	|  accrued divide by zero
-	.set	ainex_bit,3	|  accrued inexact
-|
-|	FPSR individual bit masks
-|
-	.set	neg_mask,0x08000000
-	.set	z_mask,0x04000000
-	.set	inf_mask,0x02000000
-	.set	nan_mask,0x01000000
-|
-	.set	bsun_mask,0x00008000	|
-	.set	snan_mask,0x00004000
-	.set	operr_mask,0x00002000
-	.set	ovfl_mask,0x00001000
-	.set	unfl_mask,0x00000800
-	.set	dz_mask,0x00000400
-	.set	inex2_mask,0x00000200
-	.set	inex1_mask,0x00000100
-|
-	.set	aiop_mask,0x00000080	|  accrued illegal operation
-	.set	aovfl_mask,0x00000040	|  accrued overflow
-	.set	aunfl_mask,0x00000020	|  accrued underflow
-	.set	adz_mask,0x00000010	|  accrued divide by zero
-	.set	ainex_mask,0x00000008	|  accrued inexact
-|
-|	FPSR combinations used in the FPSP
-|
-	.set	dzinf_mask,inf_mask+dz_mask+adz_mask
-	.set	opnan_mask,nan_mask+operr_mask+aiop_mask
-	.set	nzi_mask,0x01ffffff	|  clears N, Z, and I
-	.set	unfinx_mask,unfl_mask+inex2_mask+aunfl_mask+ainex_mask
-	.set	unf2inx_mask,unfl_mask+inex2_mask+ainex_mask
-	.set	ovfinx_mask,ovfl_mask+inex2_mask+aovfl_mask+ainex_mask
-	.set	inx1a_mask,inex1_mask+ainex_mask
-	.set	inx2a_mask,inex2_mask+ainex_mask
-	.set	snaniop_mask,nan_mask+snan_mask+aiop_mask
-	.set	naniop_mask,nan_mask+aiop_mask
-	.set	neginf_mask,neg_mask+inf_mask
-	.set	infaiop_mask,inf_mask+aiop_mask
-	.set	negz_mask,neg_mask+z_mask
-	.set	opaop_mask,operr_mask+aiop_mask
-	.set	unfl_inx_mask,unfl_mask+aunfl_mask+ainex_mask
-	.set	ovfl_inx_mask,ovfl_mask+aovfl_mask+ainex_mask
-|
-|--------------------------------------------------------------------------
-|
-|	FPCR rounding modes
-|
-	.set	x_mode,0x00	|  round to extended
-	.set	s_mode,0x40	|  round to single
-	.set	d_mode,0x80	|  round to double
-|
-	.set	rn_mode,0x00	|  round nearest
-	.set	rz_mode,0x10	|  round to zero
-	.set	rm_mode,0x20	|  round to minus infinity
-	.set	rp_mode,0x30	|  round to plus infinity
-|
-|--------------------------------------------------------------------------
-|
-|	Miscellaneous equates
-|
-	.set	signan_bit,6	|  signalling nan bit in mantissa
-	.set	sign_bit,7
-|
-	.set	rnd_stky_bit,29	|  round/sticky bit of mantissa
-|				this can only be used if in a data register
-	.set	sx_mask,0x01800000 |  set s and x bits in word $48
-|
-	.set	LOCAL_EX,0
-	.set	LOCAL_SGN,2
-	.set	LOCAL_HI,4
-	.set	LOCAL_LO,8
-	.set	LOCAL_GRS,12	|  valid ONLY for FP_SCR1, FP_SCR2
-|
-|
-	.set	norm_tag,0x00	|  tag bits in {7:5} position
-	.set	zero_tag,0x20
-	.set	inf_tag,0x40
-	.set	nan_tag,0x60
-	.set	dnrm_tag,0x80
-|
-|	fsave sizes and formats
-|
-	.set	VER_4,0x40		|  fpsp compatible version numbers
-|					are in the $40s {$40-$4f}
-	.set	VER_40,0x40		|  original version number
-	.set	VER_41,0x41		|  revision version number
-|
-	.set	BUSY_SIZE,100		|  size of busy frame
-	.set	BUSY_FRAME,LV-BUSY_SIZE	|  start of busy frame
-|
-	.set	UNIMP_40_SIZE,44		|  size of orig unimp frame
-	.set	UNIMP_41_SIZE,52		|  size of rev unimp frame
-|
-	.set	IDLE_SIZE,4		|  size of idle frame
-	.set	IDLE_FRAME,LV-IDLE_SIZE	|  start of idle frame
-|
-|	exception vectors
-|
-	.set	TRACE_VEC,0x2024		|  trace trap
-	.set	FLINE_VEC,0x002C		|  real F-line
-	.set	UNIMP_VEC,0x202C		|  unimplemented
-	.set	INEX_VEC,0x00C4
-|
-	.set	dbl_thresh,0x3C01
-	.set	sgl_thresh,0x3F81
-|
diff --git a/ANDROID_3.4.5/arch/m68k/fpsp040/gen_except.S b/ANDROID_3.4.5/arch/m68k/fpsp040/gen_except.S
deleted file mode 100644
index 3642cb7e..00000000
--- a/ANDROID_3.4.5/arch/m68k/fpsp040/gen_except.S
+++ /dev/null
@@ -1,467 +0,0 @@
-|
-|	gen_except.sa 3.7 1/16/92
-|
-|	gen_except --- FPSP routine to detect reportable exceptions
-|
-|	This routine compares the exception enable byte of the
-|	user_fpcr on the stack with the exception status byte
-|	of the user_fpsr.
-|
-|	Any routine which may report an exceptions must load
-|	the stack frame in memory with the exceptional operand(s).
-|
-|	Priority for exceptions is:
-|
-|	Highest:	bsun
-|			snan
-|			operr
-|			ovfl
-|			unfl
-|			dz
-|			inex2
-|	Lowest:		inex1
-|
-|	Note: The IEEE standard specifies that inex2 is to be
-|	reported if ovfl occurs and the ovfl enable bit is not
-|	set but the inex2 enable bit is.
-|
-|
-|		Copyright (C) Motorola, Inc. 1990
-|			All Rights Reserved
-|
-|       For details on the license for this file, please see the
-|       file, README, in this same directory.
-
-GEN_EXCEPT:    |idnt    2,1 | Motorola 040 Floating Point Software Package
-
-	|section 8
-
-#include "fpsp.h"
-
-	|xref	real_trace
-	|xref	fpsp_done
-	|xref	fpsp_fmt_error
-
-exc_tbl:
-	.long	bsun_exc
-	.long	commonE1
-	.long	commonE1
-	.long	ovfl_unfl
-	.long	ovfl_unfl
-	.long	commonE1
-	.long	commonE3
-	.long	commonE3
-	.long	no_match
-
-	.global	gen_except
-gen_except:
-	cmpib	#IDLE_SIZE-4,1(%a7)	|test for idle frame
-	beq	do_check		|go handle idle frame
-	cmpib	#UNIMP_40_SIZE-4,1(%a7)	|test for orig unimp frame
-	beqs	unimp_x			|go handle unimp frame
-	cmpib	#UNIMP_41_SIZE-4,1(%a7)	|test for rev unimp frame
-	beqs	unimp_x			|go handle unimp frame
-	cmpib	#BUSY_SIZE-4,1(%a7)	|if size <> $60, fmt error
-	bnel	fpsp_fmt_error
-	leal	BUSY_SIZE+LOCAL_SIZE(%a7),%a1 |init a1 so fpsp.h
-|					;equates will work
-| Fix up the new busy frame with entries from the unimp frame
-|
-	movel	ETEMP_EX(%a6),ETEMP_EX(%a1) |copy etemp from unimp
-	movel	ETEMP_HI(%a6),ETEMP_HI(%a1) |frame to busy frame
-	movel	ETEMP_LO(%a6),ETEMP_LO(%a1)
-	movel	CMDREG1B(%a6),CMDREG1B(%a1) |set inst in frame to unimp
-	movel	CMDREG1B(%a6),%d0		|fix cmd1b to make it
-	andl	#0x03c30000,%d0		|work for cmd3b
-	bfextu	CMDREG1B(%a6){#13:#1},%d1	|extract bit 2
-	lsll	#5,%d1
-	swap	%d1
-	orl	%d1,%d0			|put it in the right place
-	bfextu	CMDREG1B(%a6){#10:#3},%d1	|extract bit 3,4,5
-	lsll	#2,%d1
-	swap	%d1
-	orl	%d1,%d0			|put them in the right place
-	movel	%d0,CMDREG3B(%a1)		|in the busy frame
-|
-| Or in the FPSR from the emulation with the USER_FPSR on the stack.
-|
-	fmovel	%FPSR,%d0
-	orl	%d0,USER_FPSR(%a6)
-	movel	USER_FPSR(%a6),FPSR_SHADOW(%a1) |set exc bits
-	orl	#sx_mask,E_BYTE(%a1)
-	bra	do_clean
-
-|
-| Frame is an unimp frame possible resulting from an fmove <ea>,fp0
-| that caused an exception
-|
-| a1 is modified to point into the new frame allowing fpsp equates
-| to be valid.
-|
-unimp_x:
-	cmpib	#UNIMP_40_SIZE-4,1(%a7)	|test for orig unimp frame
-	bnes	test_rev
-	leal	UNIMP_40_SIZE+LOCAL_SIZE(%a7),%a1
-	bras	unimp_con
-test_rev:
-	cmpib	#UNIMP_41_SIZE-4,1(%a7)	|test for rev unimp frame
-	bnel	fpsp_fmt_error		|if not $28 or $30
-	leal	UNIMP_41_SIZE+LOCAL_SIZE(%a7),%a1
-
-unimp_con:
-|
-| Fix up the new unimp frame with entries from the old unimp frame
-|
-	movel	CMDREG1B(%a6),CMDREG1B(%a1) |set inst in frame to unimp
-|
-| Or in the FPSR from the emulation with the USER_FPSR on the stack.
-|
-	fmovel	%FPSR,%d0
-	orl	%d0,USER_FPSR(%a6)
-	bra	do_clean
-
-|
-| Frame is idle, so check for exceptions reported through
-| USER_FPSR and set the unimp frame accordingly.
-| A7 must be incremented to the point before the
-| idle fsave vector to the unimp vector.
-|
-
-do_check:
-	addl	#4,%a7			|point A7 back to unimp frame
-|
-| Or in the FPSR from the emulation with the USER_FPSR on the stack.
-|
-	fmovel	%FPSR,%d0
-	orl	%d0,USER_FPSR(%a6)
-|
-| On a busy frame, we must clear the nmnexc bits.
-|
-	cmpib	#BUSY_SIZE-4,1(%a7)	|check frame type
-	bnes	check_fr		|if busy, clr nmnexc
-	clrw	NMNEXC(%a6)		|clr nmnexc & nmcexc
-	btstb	#5,CMDREG1B(%a6)		|test for fmove out
-	bnes	frame_com
-	movel	USER_FPSR(%a6),FPSR_SHADOW(%a6) |set exc bits
-	orl	#sx_mask,E_BYTE(%a6)
-	bras	frame_com
-check_fr:
-	cmpb	#UNIMP_40_SIZE-4,1(%a7)
-	beqs	frame_com
-	clrw	NMNEXC(%a6)
-frame_com:
-	moveb	FPCR_ENABLE(%a6),%d0	|get fpcr enable byte
-	andb	FPSR_EXCEPT(%a6),%d0	|and in the fpsr exc byte
-	bfffo	%d0{#24:#8},%d1		|test for first set bit
-	leal	exc_tbl,%a0		|load jmp table address
-	subib	#24,%d1			|normalize bit offset to 0-8
-	movel	(%a0,%d1.w*4),%a0		|load routine address based
-|					;based on first enabled exc
-	jmp	(%a0)			|jump to routine
-|
-| Bsun is not possible in unimp or unsupp
-|
-bsun_exc:
-	bra	do_clean
-|
-| The typical work to be done to the unimp frame to report an
-| exception is to set the E1/E3 byte and clr the U flag.
-| commonE1 does this for E1 exceptions, which are snan,
-| operr, and dz.  commonE3 does this for E3 exceptions, which
-| are inex2 and inex1, and also clears the E1 exception bit
-| left over from the unimp exception.
-|
-commonE1:
-	bsetb	#E1,E_BYTE(%a6)		|set E1 flag
-	bra	commonE			|go clean and exit
-
-commonE3:
-	tstb	UFLG_TMP(%a6)		|test flag for unsup/unimp state
-	bnes	unsE3
-uniE3:
-	bsetb	#E3,E_BYTE(%a6)		|set E3 flag
-	bclrb	#E1,E_BYTE(%a6)		|clr E1 from unimp
-	bra	commonE
-
-unsE3:
-	tstb	RES_FLG(%a6)
-	bnes	unsE3_0
-unsE3_1:
-	bsetb	#E3,E_BYTE(%a6)		|set E3 flag
-unsE3_0:
-	bclrb	#E1,E_BYTE(%a6)		|clr E1 flag
-	movel	CMDREG1B(%a6),%d0
-	andl	#0x03c30000,%d0		|work for cmd3b
-	bfextu	CMDREG1B(%a6){#13:#1},%d1	|extract bit 2
-	lsll	#5,%d1
-	swap	%d1
-	orl	%d1,%d0			|put it in the right place
-	bfextu	CMDREG1B(%a6){#10:#3},%d1	|extract bit 3,4,5
-	lsll	#2,%d1
-	swap	%d1
-	orl	%d1,%d0			|put them in the right place
-	movel	%d0,CMDREG3B(%a6)		|in the busy frame
-
-commonE:
-	bclrb	#UFLAG,T_BYTE(%a6)	|clr U flag from unimp
-	bra	do_clean		|go clean and exit
-|
-| No bits in the enable byte match existing exceptions.  Check for
-| the case of the ovfl exc without the ovfl enabled, but with
-| inex2 enabled.
-|
-no_match:
-	btstb	#inex2_bit,FPCR_ENABLE(%a6) |check for ovfl/inex2 case
-	beqs	no_exc			|if clear, exit
-	btstb	#ovfl_bit,FPSR_EXCEPT(%a6) |now check ovfl
-	beqs	no_exc			|if clear, exit
-	bras	ovfl_unfl		|go to unfl_ovfl to determine if
-|					;it is an unsupp or unimp exc
-
-| No exceptions are to be reported.  If the instruction was
-| unimplemented, no FPU restore is necessary.  If it was
-| unsupported, we must perform the restore.
-no_exc:
-	tstb	UFLG_TMP(%a6)	|test flag for unsupp/unimp state
-	beqs	uni_no_exc
-uns_no_exc:
-	tstb	RES_FLG(%a6)	|check if frestore is needed
-	bne	do_clean	|if clear, no frestore needed
-uni_no_exc:
-	moveml	USER_DA(%a6),%d0-%d1/%a0-%a1
-	fmovemx USER_FP0(%a6),%fp0-%fp3
-	fmoveml USER_FPCR(%a6),%fpcr/%fpsr/%fpiar
-	unlk	%a6
-	bra	finish_up
-|
-| Unsupported Data Type Handler:
-| Ovfl:
-|   An fmoveout that results in an overflow is reported this way.
-| Unfl:
-|   An fmoveout that results in an underflow is reported this way.
-|
-| Unimplemented Instruction Handler:
-| Ovfl:
-|   Only scosh, setox, ssinh, stwotox, and scale can set overflow in
-|   this manner.
-| Unfl:
-|   Stwotox, setox, and scale can set underflow in this manner.
-|   Any of the other Library Routines such that f(x)=x in which
-|   x is an extended denorm can report an underflow exception.
-|   It is the responsibility of the exception-causing exception
-|   to make sure that WBTEMP is correct.
-|
-|   The exceptional operand is in FP_SCR1.
-|
-ovfl_unfl:
-	tstb	UFLG_TMP(%a6)	|test flag for unsupp/unimp state
-	beqs	ofuf_con
-|
-| The caller was from an unsupported data type trap.  Test if the
-| caller set CU_ONLY.  If so, the exceptional operand is expected in
-| FPTEMP, rather than WBTEMP.
-|
-	tstb	CU_ONLY(%a6)		|test if inst is cu-only
-	beq	unsE3
-|	move.w	#$fe,CU_SAVEPC(%a6)
-	clrb	CU_SAVEPC(%a6)
-	bsetb	#E1,E_BYTE(%a6)		|set E1 exception flag
-	movew	ETEMP_EX(%a6),FPTEMP_EX(%a6)
-	movel	ETEMP_HI(%a6),FPTEMP_HI(%a6)
-	movel	ETEMP_LO(%a6),FPTEMP_LO(%a6)
-	bsetb	#fptemp15_bit,DTAG(%a6)	|set fpte15
-	bclrb	#UFLAG,T_BYTE(%a6)	|clr U flag from unimp
-	bra	do_clean		|go clean and exit
-
-ofuf_con:
-	moveb	(%a7),VER_TMP(%a6)	|save version number
-	cmpib	#BUSY_SIZE-4,1(%a7)	|check for busy frame
-	beqs	busy_fr			|if unimp, grow to busy
-	cmpib	#VER_40,(%a7)		|test for orig unimp frame
-	bnes	try_41			|if not, test for rev frame
-	moveql	#13,%d0			|need to zero 14 lwords
-	bras	ofuf_fin
-try_41:
-	cmpib	#VER_41,(%a7)		|test for rev unimp frame
-	bnel	fpsp_fmt_error		|if neither, exit with error
-	moveql	#11,%d0			|need to zero 12 lwords
-
-ofuf_fin:
-	clrl	(%a7)
-loop1:
-	clrl	-(%a7)			|clear and dec a7
-	dbra	%d0,loop1
-	moveb	VER_TMP(%a6),(%a7)
-	moveb	#BUSY_SIZE-4,1(%a7)		|write busy fmt word.
-busy_fr:
-	movel	FP_SCR1(%a6),WBTEMP_EX(%a6)	|write
-	movel	FP_SCR1+4(%a6),WBTEMP_HI(%a6)	|exceptional op to
-	movel	FP_SCR1+8(%a6),WBTEMP_LO(%a6)	|wbtemp
-	bsetb	#E3,E_BYTE(%a6)			|set E3 flag
-	bclrb	#E1,E_BYTE(%a6)			|make sure E1 is clear
-	bclrb	#UFLAG,T_BYTE(%a6)		|clr U flag
-	movel	USER_FPSR(%a6),FPSR_SHADOW(%a6)
-	orl	#sx_mask,E_BYTE(%a6)
-	movel	CMDREG1B(%a6),%d0		|fix cmd1b to make it
-	andl	#0x03c30000,%d0		|work for cmd3b
-	bfextu	CMDREG1B(%a6){#13:#1},%d1	|extract bit 2
-	lsll	#5,%d1
-	swap	%d1
-	orl	%d1,%d0			|put it in the right place
-	bfextu	CMDREG1B(%a6){#10:#3},%d1	|extract bit 3,4,5
-	lsll	#2,%d1
-	swap	%d1
-	orl	%d1,%d0			|put them in the right place
-	movel	%d0,CMDREG3B(%a6)		|in the busy frame
-
-|
-| Check if the frame to be restored is busy or unimp.
-|** NOTE *** Bug fix for errata (0d43b #3)
-| If the frame is unimp, we must create a busy frame to
-| fix the bug with the nmnexc bits in cases in which they
-| are set by a previous instruction and not cleared by
-| the save. The frame will be unimp only if the final
-| instruction in an emulation routine caused the exception
-| by doing an fmove <ea>,fp0.  The exception operand, in
-| internal format, is in fptemp.
-|
-do_clean:
-	cmpib	#UNIMP_40_SIZE-4,1(%a7)
-	bnes	do_con
-	moveql	#13,%d0			|in orig, need to zero 14 lwords
-	bras	do_build
-do_con:
-	cmpib	#UNIMP_41_SIZE-4,1(%a7)
-	bnes	do_restore		|frame must be busy
-	moveql	#11,%d0			|in rev, need to zero 12 lwords
-
-do_build:
-	moveb	(%a7),VER_TMP(%a6)
-	clrl	(%a7)
-loop2:
-	clrl	-(%a7)			|clear and dec a7
-	dbra	%d0,loop2
-|
-| Use a1 as pointer into new frame.  a6 is not correct if an unimp or
-| busy frame was created as the result of an exception on the final
-| instruction of an emulation routine.
-|
-| We need to set the nmcexc bits if the exception is E1. Otherwise,
-| the exc taken will be inex2.
-|
-	leal	BUSY_SIZE+LOCAL_SIZE(%a7),%a1	|init a1 for new frame
-	moveb	VER_TMP(%a6),(%a7)	|write busy fmt word
-	moveb	#BUSY_SIZE-4,1(%a7)
-	movel	FP_SCR1(%a6),WBTEMP_EX(%a1)	|write
-	movel	FP_SCR1+4(%a6),WBTEMP_HI(%a1)	|exceptional op to
-	movel	FP_SCR1+8(%a6),WBTEMP_LO(%a1)	|wbtemp
-|	btst.b	#E1,E_BYTE(%a1)
-|	beq.b	do_restore
-	bfextu	USER_FPSR(%a6){#17:#4},%d0	|get snan/operr/ovfl/unfl bits
-	bfins	%d0,NMCEXC(%a1){#4:#4}	|and insert them in nmcexc
-	movel	USER_FPSR(%a6),FPSR_SHADOW(%a1) |set exc bits
-	orl	#sx_mask,E_BYTE(%a1)
-
-do_restore:
-	moveml	USER_DA(%a6),%d0-%d1/%a0-%a1
-	fmovemx USER_FP0(%a6),%fp0-%fp3
-	fmoveml USER_FPCR(%a6),%fpcr/%fpsr/%fpiar
-	frestore (%a7)+
-	tstb	RES_FLG(%a6)	|RES_FLG indicates a "continuation" frame
-	beq	cont
-	bsr	bug1384
-cont:
-	unlk	%a6
-|
-| If trace mode enabled, then go to trace handler.  This handler
-| cannot have any fp instructions.  If there are fp inst's and an
-| exception has been restored into the machine then the exception
-| will occur upon execution of the fp inst.  This is not desirable
-| in the kernel (supervisor mode).  See MC68040 manual Section 9.3.8.
-|
-finish_up:
-	btstb	#7,(%a7)		|test T1 in SR
-	bnes	g_trace
-	btstb	#6,(%a7)		|test T0 in SR
-	bnes	g_trace
-	bral	fpsp_done
-|
-| Change integer stack to look like trace stack
-| The address of the instruction that caused the
-| exception is already in the integer stack (is
-| the same as the saved friar)
-|
-| If the current frame is already a 6-word stack then all
-| that needs to be done is to change the vector# to TRACE.
-| If the frame is only a 4-word stack (meaning we got here
-| on an Unsupported data type exception), then we need to grow
-| the stack an extra 2 words and get the FPIAR from the FPU.
-|
-g_trace:
-	bftst	EXC_VEC-4(%sp){#0:#4}
-	bne	g_easy
-
-	subw	#4,%sp		| make room
-	movel	4(%sp),(%sp)
-	movel	8(%sp),4(%sp)
-	subw	#BUSY_SIZE,%sp
-	fsave	(%sp)
-	fmovel	%fpiar,BUSY_SIZE+EXC_EA-4(%sp)
-	frestore (%sp)
-	addw	#BUSY_SIZE,%sp
-
-g_easy:
-	movew	#TRACE_VEC,EXC_VEC-4(%a7)
-	bral	real_trace
-|
-|  This is a work-around for hardware bug 1384.
-|
-bug1384:
-	link	%a5,#0
-	fsave	-(%sp)
-	cmpib	#0x41,(%sp)	| check for correct frame
-	beq	frame_41
-	bgt	nofix		| if more advanced mask, do nada
-
-frame_40:
-	tstb	1(%sp)		| check to see if idle
-	bne	notidle
-idle40:
-	clrl	(%sp)		| get rid of old fsave frame
-        movel  %d1,USER_D1(%a6)  | save d1
-	movew	#8,%d1		| place unimp frame instead
-loop40:	clrl	-(%sp)
-	dbra	%d1,loop40
-        movel  USER_D1(%a6),%d1  | restore d1
-	movel	#0x40280000,-(%sp)
-	frestore (%sp)+
-	unlk	%a5
-	rts
-
-frame_41:
-	tstb	1(%sp)		| check to see if idle
-	bne	notidle
-idle41:
-	clrl	(%sp)		| get rid of old fsave frame
-        movel  %d1,USER_D1(%a6)  | save d1
-	movew	#10,%d1		| place unimp frame instead
-loop41:	clrl	-(%sp)
-	dbra	%d1,loop41
-        movel  USER_D1(%a6),%d1  | restore d1
-	movel	#0x41300000,-(%sp)
-	frestore (%sp)+
-	unlk	%a5
-	rts
-
-notidle:
-	bclrb	#etemp15_bit,-40(%a5)
-	frestore (%sp)+
-	unlk	%a5
-	rts
-
-nofix:
-	frestore (%sp)+
-	unlk	%a5
-	rts
-
-	|end
diff --git a/ANDROID_3.4.5/arch/m68k/fpsp040/get_op.S b/ANDROID_3.4.5/arch/m68k/fpsp040/get_op.S
deleted file mode 100644
index 64c36d79..00000000
--- a/ANDROID_3.4.5/arch/m68k/fpsp040/get_op.S
+++ /dev/null
@@ -1,675 +0,0 @@
-|
-|	get_op.sa 3.6 5/19/92
-|
-|	get_op.sa 3.5 4/26/91
-|
-|  Description: This routine is called by the unsupported format/data
-| type exception handler ('unsupp' - vector 55) and the unimplemented
-| instruction exception handler ('unimp' - vector 11).  'get_op'
-| determines the opclass (0, 2, or 3) and branches to the
-| opclass handler routine.  See 68881/2 User's Manual table 4-11
-| for a description of the opclasses.
-|
-| For UNSUPPORTED data/format (exception vector 55) and for
-| UNIMPLEMENTED instructions (exception vector 11) the following
-| applies:
-|
-| - For unnormalized numbers (opclass 0, 2, or 3) the
-| number(s) is normalized and the operand type tag is updated.
-|
-| - For a packed number (opclass 2) the number is unpacked and the
-| operand type tag is updated.
-|
-| - For denormalized numbers (opclass 0 or 2) the number(s) is not
-| changed but passed to the next module.  The next module for
-| unimp is do_func, the next module for unsupp is res_func.
-|
-| For UNSUPPORTED data/format (exception vector 55) only the
-| following applies:
-|
-| - If there is a move out with a packed number (opclass 3) the
-| number is packed and written to user memory.  For the other
-| opclasses the number(s) are written back to the fsave stack
-| and the instruction is then restored back into the '040.  The
-| '040 is then able to complete the instruction.
-|
-| For example:
-| fadd.x fpm,fpn where the fpm contains an unnormalized number.
-| The '040 takes an unsupported data trap and gets to this
-| routine.  The number is normalized, put back on the stack and
-| then an frestore is done to restore the instruction back into
-| the '040.  The '040 then re-executes the fadd.x fpm,fpn with
-| a normalized number in the source and the instruction is
-| successful.
-|
-| Next consider if in the process of normalizing the un-
-| normalized number it becomes a denormalized number.  The
-| routine which converts the unnorm to a norm (called mk_norm)
-| detects this and tags the number as a denorm.  The routine
-| res_func sees the denorm tag and converts the denorm to a
-| norm.  The instruction is then restored back into the '040
-| which re_executes the instruction.
-|
-|
-|		Copyright (C) Motorola, Inc. 1990
-|			All Rights Reserved
-|
-|       For details on the license for this file, please see the
-|       file, README, in this same directory.
-
-GET_OP:    |idnt    2,1 | Motorola 040 Floating Point Software Package
-
-	|section	8
-
-#include "fpsp.h"
-
-	.global	PIRN,PIRZRM,PIRP
-	.global	SMALRN,SMALRZRM,SMALRP
-	.global	BIGRN,BIGRZRM,BIGRP
-
-PIRN:
-	.long 0x40000000,0xc90fdaa2,0x2168c235    |pi
-PIRZRM:
-	.long 0x40000000,0xc90fdaa2,0x2168c234    |pi
-PIRP:
-	.long 0x40000000,0xc90fdaa2,0x2168c235    |pi
-
-|round to nearest
-SMALRN:
-	.long 0x3ffd0000,0x9a209a84,0xfbcff798    |log10(2)
-	.long 0x40000000,0xadf85458,0xa2bb4a9a    |e
-	.long 0x3fff0000,0xb8aa3b29,0x5c17f0bc    |log2(e)
-	.long 0x3ffd0000,0xde5bd8a9,0x37287195    |log10(e)
-	.long 0x00000000,0x00000000,0x00000000    |0.0
-| round to zero;round to negative infinity
-SMALRZRM:
-	.long 0x3ffd0000,0x9a209a84,0xfbcff798    |log10(2)
-	.long 0x40000000,0xadf85458,0xa2bb4a9a    |e
-	.long 0x3fff0000,0xb8aa3b29,0x5c17f0bb    |log2(e)
-	.long 0x3ffd0000,0xde5bd8a9,0x37287195    |log10(e)
-	.long 0x00000000,0x00000000,0x00000000    |0.0
-| round to positive infinity
-SMALRP:
-	.long 0x3ffd0000,0x9a209a84,0xfbcff799    |log10(2)
-	.long 0x40000000,0xadf85458,0xa2bb4a9b    |e
-	.long 0x3fff0000,0xb8aa3b29,0x5c17f0bc    |log2(e)
-	.long 0x3ffd0000,0xde5bd8a9,0x37287195    |log10(e)
-	.long 0x00000000,0x00000000,0x00000000    |0.0
-
-|round to nearest
-BIGRN:
-	.long 0x3ffe0000,0xb17217f7,0xd1cf79ac    |ln(2)
-	.long 0x40000000,0x935d8ddd,0xaaa8ac17    |ln(10)
-	.long 0x3fff0000,0x80000000,0x00000000    |10 ^ 0
-
-	.global	PTENRN
-PTENRN:
-	.long 0x40020000,0xA0000000,0x00000000    |10 ^ 1
-	.long 0x40050000,0xC8000000,0x00000000    |10 ^ 2
-	.long 0x400C0000,0x9C400000,0x00000000    |10 ^ 4
-	.long 0x40190000,0xBEBC2000,0x00000000    |10 ^ 8
-	.long 0x40340000,0x8E1BC9BF,0x04000000    |10 ^ 16
-	.long 0x40690000,0x9DC5ADA8,0x2B70B59E    |10 ^ 32
-	.long 0x40D30000,0xC2781F49,0xFFCFA6D5    |10 ^ 64
-	.long 0x41A80000,0x93BA47C9,0x80E98CE0    |10 ^ 128
-	.long 0x43510000,0xAA7EEBFB,0x9DF9DE8E    |10 ^ 256
-	.long 0x46A30000,0xE319A0AE,0xA60E91C7    |10 ^ 512
-	.long 0x4D480000,0xC9767586,0x81750C17    |10 ^ 1024
-	.long 0x5A920000,0x9E8B3B5D,0xC53D5DE5    |10 ^ 2048
-	.long 0x75250000,0xC4605202,0x8A20979B    |10 ^ 4096
-|round to minus infinity
-BIGRZRM:
-	.long 0x3ffe0000,0xb17217f7,0xd1cf79ab    |ln(2)
-	.long 0x40000000,0x935d8ddd,0xaaa8ac16    |ln(10)
-	.long 0x3fff0000,0x80000000,0x00000000    |10 ^ 0
-
-	.global	PTENRM
-PTENRM:
-	.long 0x40020000,0xA0000000,0x00000000    |10 ^ 1
-	.long 0x40050000,0xC8000000,0x00000000    |10 ^ 2
-	.long 0x400C0000,0x9C400000,0x00000000    |10 ^ 4
-	.long 0x40190000,0xBEBC2000,0x00000000    |10 ^ 8
-	.long 0x40340000,0x8E1BC9BF,0x04000000    |10 ^ 16
-	.long 0x40690000,0x9DC5ADA8,0x2B70B59D    |10 ^ 32
-	.long 0x40D30000,0xC2781F49,0xFFCFA6D5    |10 ^ 64
-	.long 0x41A80000,0x93BA47C9,0x80E98CDF    |10 ^ 128
-	.long 0x43510000,0xAA7EEBFB,0x9DF9DE8D    |10 ^ 256
-	.long 0x46A30000,0xE319A0AE,0xA60E91C6    |10 ^ 512
-	.long 0x4D480000,0xC9767586,0x81750C17    |10 ^ 1024
-	.long 0x5A920000,0x9E8B3B5D,0xC53D5DE5    |10 ^ 2048
-	.long 0x75250000,0xC4605202,0x8A20979A    |10 ^ 4096
-|round to positive infinity
-BIGRP:
-	.long 0x3ffe0000,0xb17217f7,0xd1cf79ac    |ln(2)
-	.long 0x40000000,0x935d8ddd,0xaaa8ac17    |ln(10)
-	.long 0x3fff0000,0x80000000,0x00000000    |10 ^ 0
-
-	.global	PTENRP
-PTENRP:
-	.long 0x40020000,0xA0000000,0x00000000    |10 ^ 1
-	.long 0x40050000,0xC8000000,0x00000000    |10 ^ 2
-	.long 0x400C0000,0x9C400000,0x00000000    |10 ^ 4
-	.long 0x40190000,0xBEBC2000,0x00000000    |10 ^ 8
-	.long 0x40340000,0x8E1BC9BF,0x04000000    |10 ^ 16
-	.long 0x40690000,0x9DC5ADA8,0x2B70B59E    |10 ^ 32
-	.long 0x40D30000,0xC2781F49,0xFFCFA6D6    |10 ^ 64
-	.long 0x41A80000,0x93BA47C9,0x80E98CE0    |10 ^ 128
-	.long 0x43510000,0xAA7EEBFB,0x9DF9DE8E    |10 ^ 256
-	.long 0x46A30000,0xE319A0AE,0xA60E91C7    |10 ^ 512
-	.long 0x4D480000,0xC9767586,0x81750C18    |10 ^ 1024
-	.long 0x5A920000,0x9E8B3B5D,0xC53D5DE6    |10 ^ 2048
-	.long 0x75250000,0xC4605202,0x8A20979B    |10 ^ 4096
-
-	|xref	nrm_zero
-	|xref	decbin
-	|xref	round
-
-	.global    get_op
-	.global    uns_getop
-	.global    uni_getop
-get_op:
-	clrb	DY_MO_FLG(%a6)
-	tstb	UFLG_TMP(%a6)	|test flag for unsupp/unimp state
-	beq	uni_getop
-
-uns_getop:
-	btstb	#direction_bit,CMDREG1B(%a6)
-	bne	opclass3	|branch if a fmove out (any kind)
-	btstb	#6,CMDREG1B(%a6)
-	beqs	uns_notpacked
-
-	bfextu	CMDREG1B(%a6){#3:#3},%d0
-	cmpb	#3,%d0
-	beq	pack_source	|check for a packed src op, branch if so
-uns_notpacked:
-	bsr	chk_dy_mo	|set the dyadic/monadic flag
-	tstb	DY_MO_FLG(%a6)
-	beqs	src_op_ck	|if monadic, go check src op
-|				;else, check dst op (fall through)
-
-	btstb	#7,DTAG(%a6)
-	beqs	src_op_ck	|if dst op is norm, check src op
-	bras	dst_ex_dnrm	|else, handle destination unnorm/dnrm
-
-uni_getop:
-	bfextu	CMDREG1B(%a6){#0:#6},%d0 |get opclass and src fields
-	cmpil	#0x17,%d0		|if op class and size fields are $17,
-|				;it is FMOVECR; if not, continue
-|
-| If the instruction is fmovecr, exit get_op.  It is handled
-| in do_func and smovecr.sa.
-|
-	bne	not_fmovecr	|handle fmovecr as an unimplemented inst
-	rts
-
-not_fmovecr:
-	btstb	#E1,E_BYTE(%a6)	|if set, there is a packed operand
-	bne	pack_source	|check for packed src op, branch if so
-
-| The following lines of are coded to optimize on normalized operands
-	moveb	STAG(%a6),%d0
-	orb	DTAG(%a6),%d0	|check if either of STAG/DTAG msb set
-	bmis	dest_op_ck	|if so, some op needs to be fixed
-	rts
-
-dest_op_ck:
-	btstb	#7,DTAG(%a6)	|check for unsupported data types in
-	beqs	src_op_ck	|the destination, if not, check src op
-	bsr	chk_dy_mo	|set dyadic/monadic flag
-	tstb	DY_MO_FLG(%a6)	|
-	beqs	src_op_ck	|if monadic, check src op
-|
-| At this point, destination has an extended denorm or unnorm.
-|
-dst_ex_dnrm:
-	movew	FPTEMP_EX(%a6),%d0 |get destination exponent
-	andiw	#0x7fff,%d0	|mask sign, check if exp = 0000
-	beqs	src_op_ck	|if denorm then check source op.
-|				;denorms are taken care of in res_func
-|				;(unsupp) or do_func (unimp)
-|				;else unnorm fall through
-	leal	FPTEMP(%a6),%a0	|point a0 to dop - used in mk_norm
-	bsr	mk_norm		|go normalize - mk_norm returns:
-|				;L_SCR1{7:5} = operand tag
-|				;	(000 = norm, 100 = denorm)
-|				;L_SCR1{4} = fpte15 or ete15
-|				;	0 = exp >  $3fff
-|				;	1 = exp <= $3fff
-|				;and puts the normalized num back
-|				;on the fsave stack
-|
-	moveb L_SCR1(%a6),DTAG(%a6) |write the new tag & fpte15
-|				;to the fsave stack and fall
-|				;through to check source operand
-|
-src_op_ck:
-	btstb	#7,STAG(%a6)
-	beq	end_getop	|check for unsupported data types on the
-|				;source operand
-	btstb	#5,STAG(%a6)
-	bnes	src_sd_dnrm	|if bit 5 set, handle sgl/dbl denorms
-|
-| At this point only unnorms or extended denorms are possible.
-|
-src_ex_dnrm:
-	movew	ETEMP_EX(%a6),%d0 |get source exponent
-	andiw	#0x7fff,%d0	|mask sign, check if exp = 0000
-	beq	end_getop	|if denorm then exit, denorms are
-|				;handled in do_func
-	leal	ETEMP(%a6),%a0	|point a0 to sop - used in mk_norm
-	bsr	mk_norm		|go normalize - mk_norm returns:
-|				;L_SCR1{7:5} = operand tag
-|				;	(000 = norm, 100 = denorm)
-|				;L_SCR1{4} = fpte15 or ete15
-|				;	0 = exp >  $3fff
-|				;	1 = exp <= $3fff
-|				;and puts the normalized num back
-|				;on the fsave stack
-|
-	moveb	L_SCR1(%a6),STAG(%a6) |write the new tag & ete15
-	rts			|end_getop
-
-|
-| At this point, only single or double denorms are possible.
-| If the inst is not fmove, normalize the source.  If it is,
-| do nothing to the input.
-|
-src_sd_dnrm:
-	btstb	#4,CMDREG1B(%a6)	|differentiate between sgl/dbl denorm
-	bnes	is_double
-is_single:
-	movew	#0x3f81,%d1	|write bias for sgl denorm
-	bras	common		|goto the common code
-is_double:
-	movew	#0x3c01,%d1	|write the bias for a dbl denorm
-common:
-	btstb	#sign_bit,ETEMP_EX(%a6) |grab sign bit of mantissa
-	beqs	pos
-	bset	#15,%d1		|set sign bit because it is negative
-pos:
-	movew	%d1,ETEMP_EX(%a6)
-|				;put exponent on stack
-
-	movew	CMDREG1B(%a6),%d1
-	andw	#0xe3ff,%d1	|clear out source specifier
-	orw	#0x0800,%d1	|set source specifier to extended prec
-	movew	%d1,CMDREG1B(%a6)	|write back to the command word in stack
-|				;this is needed to fix unsupp data stack
-	leal	ETEMP(%a6),%a0	|point a0 to sop
-
-	bsr	mk_norm		|convert sgl/dbl denorm to norm
-	moveb	L_SCR1(%a6),STAG(%a6) |put tag into source tag reg - d0
-	rts			|end_getop
-|
-| At this point, the source is definitely packed, whether
-| instruction is dyadic or monadic is still unknown
-|
-pack_source:
-	movel	FPTEMP_LO(%a6),ETEMP(%a6)	|write ms part of packed
-|				;number to etemp slot
-	bsr	chk_dy_mo	|set dyadic/monadic flag
-	bsr	unpack
-
-	tstb	DY_MO_FLG(%a6)
-	beqs	end_getop	|if monadic, exit
-|				;else, fix FPTEMP
-pack_dya:
-	bfextu	CMDREG1B(%a6){#6:#3},%d0 |extract dest fp reg
-	movel	#7,%d1
-	subl	%d0,%d1
-	clrl	%d0
-	bsetl	%d1,%d0		|set up d0 as a dynamic register mask
-	fmovemx %d0,FPTEMP(%a6)	|write to FPTEMP
-
-	btstb	#7,DTAG(%a6)	|check dest tag for unnorm or denorm
-	bne	dst_ex_dnrm	|else, handle the unnorm or ext denorm
-|
-| Dest is not denormalized.  Check for norm, and set fpte15
-| accordingly.
-|
-	moveb	DTAG(%a6),%d0
-	andib	#0xf0,%d0		|strip to only dtag:fpte15
-	tstb	%d0		|check for normalized value
-	bnes	end_getop	|if inf/nan/zero leave get_op
-	movew	FPTEMP_EX(%a6),%d0
-	andiw	#0x7fff,%d0
-	cmpiw	#0x3fff,%d0	|check if fpte15 needs setting
-	bges	end_getop	|if >= $3fff, leave fpte15=0
-	orb	#0x10,DTAG(%a6)
-	bras	end_getop
-
-|
-| At this point, it is either an fmoveout packed, unnorm or denorm
-|
-opclass3:
-	clrb	DY_MO_FLG(%a6)	|set dyadic/monadic flag to monadic
-	bfextu	CMDREG1B(%a6){#4:#2},%d0
-	cmpib	#3,%d0
-	bne	src_ex_dnrm	|if not equal, must be unnorm or denorm
-|				;else it is a packed move out
-|				;exit
-end_getop:
-	rts
-
-|
-| Sets the DY_MO_FLG correctly. This is used only on if it is an
-| unsupported data type exception.  Set if dyadic.
-|
-chk_dy_mo:
-	movew	CMDREG1B(%a6),%d0
-	btstl	#5,%d0		|testing extension command word
-	beqs	set_mon		|if bit 5 = 0 then monadic
-	btstl	#4,%d0		|know that bit 5 = 1
-	beqs	set_dya		|if bit 4 = 0 then dyadic
-	andiw	#0x007f,%d0	|get rid of all but extension bits {6:0}
-	cmpiw	#0x0038,%d0	|if extension = $38 then fcmp (dyadic)
-	bnes	set_mon
-set_dya:
-	st	DY_MO_FLG(%a6)	|set the inst flag type to dyadic
-	rts
-set_mon:
-	clrb	DY_MO_FLG(%a6)	|set the inst flag type to monadic
-	rts
-|
-|	MK_NORM
-|
-| Normalizes unnormalized numbers, sets tag to norm or denorm, sets unfl
-| exception if denorm.
-|
-| CASE opclass 0x0 unsupp
-|	mk_norm till msb set
-|	set tag = norm
-|
-| CASE opclass 0x0 unimp
-|	mk_norm till msb set or exp = 0
-|	if integer bit = 0
-|	   tag = denorm
-|	else
-|	   tag = norm
-|
-| CASE opclass 011 unsupp
-|	mk_norm till msb set or exp = 0
-|	if integer bit = 0
-|	   tag = denorm
-|	   set unfl_nmcexe = 1
-|	else
-|	   tag = norm
-|
-| if exp <= $3fff
-|   set ete15 or fpte15 = 1
-| else set ete15 or fpte15 = 0
-
-| input:
-|	a0 = points to operand to be normalized
-| output:
-|	L_SCR1{7:5} = operand tag (000 = norm, 100 = denorm)
-|	L_SCR1{4}   = fpte15 or ete15 (0 = exp > $3fff, 1 = exp <=$3fff)
-|	the normalized operand is placed back on the fsave stack
-mk_norm:
-	clrl	L_SCR1(%a6)
-	bclrb	#sign_bit,LOCAL_EX(%a0)
-	sne	LOCAL_SGN(%a0)	|transform into internal extended format
-
-	cmpib	#0x2c,1+EXC_VEC(%a6) |check if unimp
-	bnes	uns_data	|branch if unsupp
-	bsr	uni_inst	|call if unimp (opclass 0x0)
-	bras	reload
-uns_data:
-	btstb	#direction_bit,CMDREG1B(%a6) |check transfer direction
-	bnes	bit_set		|branch if set (opclass 011)
-	bsr	uns_opx		|call if opclass 0x0
-	bras	reload
-bit_set:
-	bsr	uns_op3		|opclass 011
-reload:
-	cmpw	#0x3fff,LOCAL_EX(%a0) |if exp > $3fff
-	bgts	end_mk		|   fpte15/ete15 already set to 0
-	bsetb	#4,L_SCR1(%a6)	|else set fpte15/ete15 to 1
-|				;calling routine actually sets the
-|				;value on the stack (along with the
-|				;tag), since this routine doesn't
-|				;know if it should set ete15 or fpte15
-|				;ie, it doesn't know if this is the
-|				;src op or dest op.
-end_mk:
-	bfclr	LOCAL_SGN(%a0){#0:#8}
-	beqs	end_mk_pos
-	bsetb	#sign_bit,LOCAL_EX(%a0) |convert back to IEEE format
-end_mk_pos:
-	rts
-|
-|     CASE opclass 011 unsupp
-|
-uns_op3:
-	bsr	nrm_zero	|normalize till msb = 1 or exp = zero
-	btstb	#7,LOCAL_HI(%a0)	|if msb = 1
-	bnes	no_unfl		|then branch
-set_unfl:
-	orw	#dnrm_tag,L_SCR1(%a6) |set denorm tag
-	bsetb	#unfl_bit,FPSR_EXCEPT(%a6) |set unfl exception bit
-no_unfl:
-	rts
-|
-|     CASE opclass 0x0 unsupp
-|
-uns_opx:
-	bsr	nrm_zero	|normalize the number
-	btstb	#7,LOCAL_HI(%a0)	|check if integer bit (j-bit) is set
-	beqs	uns_den		|if clear then now have a denorm
-uns_nrm:
-	orb	#norm_tag,L_SCR1(%a6) |set tag to norm
-	rts
-uns_den:
-	orb	#dnrm_tag,L_SCR1(%a6) |set tag to denorm
-	rts
-|
-|     CASE opclass 0x0 unimp
-|
-uni_inst:
-	bsr	nrm_zero
-	btstb	#7,LOCAL_HI(%a0)	|check if integer bit (j-bit) is set
-	beqs	uni_den		|if clear then now have a denorm
-uni_nrm:
-	orb	#norm_tag,L_SCR1(%a6) |set tag to norm
-	rts
-uni_den:
-	orb	#dnrm_tag,L_SCR1(%a6) |set tag to denorm
-	rts
-
-|
-|	Decimal to binary conversion
-|
-| Special cases of inf and NaNs are completed outside of decbin.
-| If the input is an snan, the snan bit is not set.
-|
-| input:
-|	ETEMP(a6)	- points to packed decimal string in memory
-| output:
-|	fp0	- contains packed string converted to extended precision
-|	ETEMP	- same as fp0
-unpack:
-	movew	CMDREG1B(%a6),%d0	|examine command word, looking for fmove's
-	andw	#0x3b,%d0
-	beq	move_unpack	|special handling for fmove: must set FPSR_CC
-
-	movew	ETEMP(%a6),%d0	|get word with inf information
-	bfextu	%d0{#20:#12},%d1	|get exponent into d1
-	cmpiw	#0x0fff,%d1	|test for inf or NaN
-	bnes	try_zero	|if not equal, it is not special
-	bfextu	%d0{#17:#3},%d1	|get SE and y bits into d1
-	cmpiw	#7,%d1		|SE and y bits must be on for special
-	bnes	try_zero	|if not on, it is not special
-|input is of the special cases of inf and NaN
-	tstl	ETEMP_HI(%a6)	|check ms mantissa
-	bnes	fix_nan		|if non-zero, it is a NaN
-	tstl	ETEMP_LO(%a6)	|check ls mantissa
-	bnes	fix_nan		|if non-zero, it is a NaN
-	bra	finish		|special already on stack
-fix_nan:
-	btstb	#signan_bit,ETEMP_HI(%a6) |test for snan
-	bne	finish
-	orl	#snaniop_mask,USER_FPSR(%a6) |always set snan if it is so
-	bra	finish
-try_zero:
-	movew	ETEMP_EX+2(%a6),%d0 |get word 4
-	andiw	#0x000f,%d0	|clear all but last ni(y)bble
-	tstw	%d0		|check for zero.
-	bne	not_spec
-	tstl	ETEMP_HI(%a6)	|check words 3 and 2
-	bne	not_spec
-	tstl	ETEMP_LO(%a6)	|check words 1 and 0
-	bne	not_spec
-	tstl	ETEMP(%a6)	|test sign of the zero
-	bges	pos_zero
-	movel	#0x80000000,ETEMP(%a6) |write neg zero to etemp
-	clrl	ETEMP_HI(%a6)
-	clrl	ETEMP_LO(%a6)
-	bra	finish
-pos_zero:
-	clrl	ETEMP(%a6)
-	clrl	ETEMP_HI(%a6)
-	clrl	ETEMP_LO(%a6)
-	bra	finish
-
-not_spec:
-	fmovemx %fp0-%fp1,-(%a7)	|save fp0 - decbin returns in it
-	bsr	decbin
-	fmovex %fp0,ETEMP(%a6)	|put the unpacked sop in the fsave stack
-	fmovemx (%a7)+,%fp0-%fp1
-	fmovel	#0,%FPSR		|clr fpsr from decbin
-	bra	finish
-
-|
-| Special handling for packed move in:  Same results as all other
-| packed cases, but we must set the FPSR condition codes properly.
-|
-move_unpack:
-	movew	ETEMP(%a6),%d0	|get word with inf information
-	bfextu	%d0{#20:#12},%d1	|get exponent into d1
-	cmpiw	#0x0fff,%d1	|test for inf or NaN
-	bnes	mtry_zero	|if not equal, it is not special
-	bfextu	%d0{#17:#3},%d1	|get SE and y bits into d1
-	cmpiw	#7,%d1		|SE and y bits must be on for special
-	bnes	mtry_zero	|if not on, it is not special
-|input is of the special cases of inf and NaN
-	tstl	ETEMP_HI(%a6)	|check ms mantissa
-	bnes	mfix_nan		|if non-zero, it is a NaN
-	tstl	ETEMP_LO(%a6)	|check ls mantissa
-	bnes	mfix_nan		|if non-zero, it is a NaN
-|input is inf
-	orl	#inf_mask,USER_FPSR(%a6) |set I bit
-	tstl	ETEMP(%a6)	|check sign
-	bge	finish
-	orl	#neg_mask,USER_FPSR(%a6) |set N bit
-	bra	finish		|special already on stack
-mfix_nan:
-	orl	#nan_mask,USER_FPSR(%a6) |set NaN bit
-	moveb	#nan_tag,STAG(%a6)	|set stag to NaN
-	btstb	#signan_bit,ETEMP_HI(%a6) |test for snan
-	bnes	mn_snan
-	orl	#snaniop_mask,USER_FPSR(%a6) |set snan bit
-	btstb	#snan_bit,FPCR_ENABLE(%a6) |test for snan enabled
-	bnes	mn_snan
-	bsetb	#signan_bit,ETEMP_HI(%a6) |force snans to qnans
-mn_snan:
-	tstl	ETEMP(%a6)	|check for sign
-	bge	finish		|if clr, go on
-	orl	#neg_mask,USER_FPSR(%a6) |set N bit
-	bra	finish
-
-mtry_zero:
-	movew	ETEMP_EX+2(%a6),%d0 |get word 4
-	andiw	#0x000f,%d0	|clear all but last ni(y)bble
-	tstw	%d0		|check for zero.
-	bnes	mnot_spec
-	tstl	ETEMP_HI(%a6)	|check words 3 and 2
-	bnes	mnot_spec
-	tstl	ETEMP_LO(%a6)	|check words 1 and 0
-	bnes	mnot_spec
-	tstl	ETEMP(%a6)	|test sign of the zero
-	bges	mpos_zero
-	orl	#neg_mask+z_mask,USER_FPSR(%a6) |set N and Z
-	movel	#0x80000000,ETEMP(%a6) |write neg zero to etemp
-	clrl	ETEMP_HI(%a6)
-	clrl	ETEMP_LO(%a6)
-	bras	finish
-mpos_zero:
-	orl	#z_mask,USER_FPSR(%a6) |set Z
-	clrl	ETEMP(%a6)
-	clrl	ETEMP_HI(%a6)
-	clrl	ETEMP_LO(%a6)
-	bras	finish
-
-mnot_spec:
-	fmovemx %fp0-%fp1,-(%a7)	|save fp0 ,fp1 - decbin returns in fp0
-	bsr	decbin
-	fmovex %fp0,ETEMP(%a6)
-|				;put the unpacked sop in the fsave stack
-	fmovemx (%a7)+,%fp0-%fp1
-
-finish:
-	movew	CMDREG1B(%a6),%d0	|get the command word
-	andw	#0xfbff,%d0	|change the source specifier field to
-|				;extended (was packed).
-	movew	%d0,CMDREG1B(%a6)	|write command word back to fsave stack
-|				;we need to do this so the 040 will
-|				;re-execute the inst. without taking
-|				;another packed trap.
-
-fix_stag:
-|Converted result is now in etemp on fsave stack, now set the source
-|tag (stag)
-|	if (ete =$7fff) then INF or NAN
-|		if (etemp = $x.0----0) then
-|			stag = INF
-|		else
-|			stag = NAN
-|	else
-|		if (ete = $0000) then
-|			stag = ZERO
-|		else
-|			stag = NORM
-|
-| Note also that the etemp_15 bit (just right of the stag) must
-| be set accordingly.
-|
-	movew		ETEMP_EX(%a6),%d1
-	andiw		#0x7fff,%d1   |strip sign
-	cmpw		#0x7fff,%d1
-	bnes		z_or_nrm
-	movel		ETEMP_HI(%a6),%d1
-	bnes		is_nan
-	movel		ETEMP_LO(%a6),%d1
-	bnes		is_nan
-is_inf:
-	moveb		#0x40,STAG(%a6)
-	movel		#0x40,%d0
-	rts
-is_nan:
-	moveb		#0x60,STAG(%a6)
-	movel		#0x60,%d0
-	rts
-z_or_nrm:
-	tstw		%d1
-	bnes		is_nrm
-is_zro:
-| For a zero, set etemp_15
-	moveb		#0x30,STAG(%a6)
-	movel		#0x20,%d0
-	rts
-is_nrm:
-| For a norm, check if the exp <= $3fff; if so, set etemp_15
-	cmpiw		#0x3fff,%d1
-	bles		set_bit15
-	moveb		#0,STAG(%a6)
-	bras		end_is_nrm
-set_bit15:
-	moveb		#0x10,STAG(%a6)
-end_is_nrm:
-	movel		#0,%d0
-end_fix:
-	rts
-
-end_get:
-	rts
-	|end
diff --git a/ANDROID_3.4.5/arch/m68k/fpsp040/kernel_ex.S b/ANDROID_3.4.5/arch/m68k/fpsp040/kernel_ex.S
deleted file mode 100644
index 45bcf345..00000000
--- a/ANDROID_3.4.5/arch/m68k/fpsp040/kernel_ex.S
+++ /dev/null
@@ -1,493 +0,0 @@
-|
-|	kernel_ex.sa 3.3 12/19/90
-|
-| This file contains routines to force exception status in the
-| fpu for exceptional cases detected or reported within the
-| transcendental functions.  Typically, the t_xx routine will
-| set the appropriate bits in the USER_FPSR word on the stack.
-| The bits are tested in gen_except.sa to determine if an exceptional
-| situation needs to be created on return from the FPSP.
-|
-
-|		Copyright (C) Motorola, Inc. 1990
-|			All Rights Reserved
-|
-|       For details on the license for this file, please see the
-|       file, README, in this same directory.
-
-KERNEL_EX:    |idnt    2,1 | Motorola 040 Floating Point Software Package
-
-	|section    8
-
-#include "fpsp.h"
-
-mns_inf:  .long 0xffff0000,0x00000000,0x00000000
-pls_inf:  .long 0x7fff0000,0x00000000,0x00000000
-nan:      .long 0x7fff0000,0xffffffff,0xffffffff
-huge:     .long 0x7ffe0000,0xffffffff,0xffffffff
-
-	|xref	  ovf_r_k
-	|xref	  unf_sub
-	|xref	  nrm_set
-
-	.global	  t_dz
-	.global      t_dz2
-	.global      t_operr
-	.global      t_unfl
-	.global      t_ovfl
-	.global      t_ovfl2
-	.global      t_inx2
-	.global	  t_frcinx
-	.global	  t_extdnrm
-	.global	  t_resdnrm
-	.global	  dst_nan
-	.global	  src_nan
-|
-|	DZ exception
-|
-|
-|	if dz trap disabled
-|		store properly signed inf (use sign of etemp) into fp0
-|		set FPSR exception status dz bit, condition code
-|		inf bit, and accrued dz bit
-|		return
-|		frestore the frame into the machine (done by unimp_hd)
-|
-|	else dz trap enabled
-|		set exception status bit & accrued bits in FPSR
-|		set flag to disable sto_res from corrupting fp register
-|		return
-|		frestore the frame into the machine (done by unimp_hd)
-|
-| t_dz2 is used by monadic functions such as flogn (from do_func).
-| t_dz is used by monadic functions such as satanh (from the
-| transcendental function).
-|
-t_dz2:
-	bsetb	#neg_bit,FPSR_CC(%a6)	|set neg bit in FPSR
-	fmovel	#0,%FPSR			|clr status bits (Z set)
-	btstb	#dz_bit,FPCR_ENABLE(%a6)	|test FPCR for dz exc enabled
-	bnes	dz_ena_end
-	bras	m_inf			|flogx always returns -inf
-t_dz:
-	fmovel	#0,%FPSR			|clr status bits (Z set)
-	btstb	#dz_bit,FPCR_ENABLE(%a6)	|test FPCR for dz exc enabled
-	bnes	dz_ena
-|
-|	dz disabled
-|
-	btstb	#sign_bit,ETEMP_EX(%a6)	|check sign for neg or pos
-	beqs	p_inf			|branch if pos sign
-
-m_inf:
-	fmovemx mns_inf,%fp0-%fp0		|load -inf
-	bsetb	#neg_bit,FPSR_CC(%a6)	|set neg bit in FPSR
-	bras	set_fpsr
-p_inf:
-	fmovemx pls_inf,%fp0-%fp0		|load +inf
-set_fpsr:
-	orl	#dzinf_mask,USER_FPSR(%a6) |set I,DZ,ADZ
-	rts
-|
-|	dz enabled
-|
-dz_ena:
-	btstb	#sign_bit,ETEMP_EX(%a6)	|check sign for neg or pos
-	beqs	dz_ena_end
-	bsetb	#neg_bit,FPSR_CC(%a6)	|set neg bit in FPSR
-dz_ena_end:
-	orl	#dzinf_mask,USER_FPSR(%a6) |set I,DZ,ADZ
-	st	STORE_FLG(%a6)
-	rts
-|
-|	OPERR exception
-|
-|	if (operr trap disabled)
-|		set FPSR exception status operr bit, condition code
-|		nan bit; Store default NAN into fp0
-|		frestore the frame into the machine (done by unimp_hd)
-|
-|	else (operr trap enabled)
-|		set FPSR exception status operr bit, accrued operr bit
-|		set flag to disable sto_res from corrupting fp register
-|		frestore the frame into the machine (done by unimp_hd)
-|
-t_operr:
-	orl	#opnan_mask,USER_FPSR(%a6) |set NaN, OPERR, AIOP
-
-	btstb	#operr_bit,FPCR_ENABLE(%a6) |test FPCR for operr enabled
-	bnes	op_ena
-
-	fmovemx nan,%fp0-%fp0		|load default nan
-	rts
-op_ena:
-	st	STORE_FLG(%a6)		|do not corrupt destination
-	rts
-
-|
-|	t_unfl --- UNFL exception
-|
-| This entry point is used by all routines requiring unfl, inex2,
-| aunfl, and ainex to be set on exit.
-|
-| On entry, a0 points to the exceptional operand.  The final exceptional
-| operand is built in FP_SCR1 and only the sign from the original operand
-| is used.
-|
-t_unfl:
-	clrl	FP_SCR1(%a6)		|set exceptional operand to zero
-	clrl	FP_SCR1+4(%a6)
-	clrl	FP_SCR1+8(%a6)
-	tstb	(%a0)			|extract sign from caller's exop
-	bpls	unfl_signok
-	bset	#sign_bit,FP_SCR1(%a6)
-unfl_signok:
-	leal	FP_SCR1(%a6),%a0
-	orl	#unfinx_mask,USER_FPSR(%a6)
-|					;set UNFL, INEX2, AUNFL, AINEX
-unfl_con:
-	btstb	#unfl_bit,FPCR_ENABLE(%a6)
-	beqs	unfl_dis
-
-unfl_ena:
-	bfclr	STAG(%a6){#5:#3}		|clear wbtm66,wbtm1,wbtm0
-	bsetb	#wbtemp15_bit,WB_BYTE(%a6) |set wbtemp15
-	bsetb	#sticky_bit,STICKY(%a6)	|set sticky bit
-
-	bclrb	#E1,E_BYTE(%a6)
-
-unfl_dis:
-	bfextu	FPCR_MODE(%a6){#0:#2},%d0	|get round precision
-
-	bclrb	#sign_bit,LOCAL_EX(%a0)
-	sne	LOCAL_SGN(%a0)		|convert to internal ext format
-
-	bsr	unf_sub			|returns IEEE result at a0
-|					;and sets FPSR_CC accordingly
-
-	bfclr	LOCAL_SGN(%a0){#0:#8}	|convert back to IEEE ext format
-	beqs	unfl_fin
-
-	bsetb	#sign_bit,LOCAL_EX(%a0)
-	bsetb	#sign_bit,FP_SCR1(%a6)	|set sign bit of exc operand
-
-unfl_fin:
-	fmovemx (%a0),%fp0-%fp0		|store result in fp0
-	rts
-
-
-|
-|	t_ovfl2 --- OVFL exception (without inex2 returned)
-|
-| This entry is used by scale to force catastrophic overflow.  The
-| ovfl, aovfl, and ainex bits are set, but not the inex2 bit.
-|
-t_ovfl2:
-	orl	#ovfl_inx_mask,USER_FPSR(%a6)
-	movel	ETEMP(%a6),FP_SCR1(%a6)
-	movel	ETEMP_HI(%a6),FP_SCR1+4(%a6)
-	movel	ETEMP_LO(%a6),FP_SCR1+8(%a6)
-|
-| Check for single or double round precision.  If single, check if
-| the lower 40 bits of ETEMP are zero; if not, set inex2.  If double,
-| check if the lower 21 bits are zero; if not, set inex2.
-|
-	moveb	FPCR_MODE(%a6),%d0
-	andib	#0xc0,%d0
-	beq	t_work		|if extended, finish ovfl processing
-	cmpib	#0x40,%d0		|test for single
-	bnes	t_dbl
-t_sgl:
-	tstb	ETEMP_LO(%a6)
-	bnes	t_setinx2
-	movel	ETEMP_HI(%a6),%d0
-	andil	#0xff,%d0		|look at only lower 8 bits
-	bnes	t_setinx2
-	bra	t_work
-t_dbl:
-	movel	ETEMP_LO(%a6),%d0
-	andil	#0x7ff,%d0	|look at only lower 11 bits
-	beq	t_work
-t_setinx2:
-	orl	#inex2_mask,USER_FPSR(%a6)
-	bras	t_work
-|
-|	t_ovfl --- OVFL exception
-|
-|** Note: the exc operand is returned in ETEMP.
-|
-t_ovfl:
-	orl	#ovfinx_mask,USER_FPSR(%a6)
-t_work:
-	btstb	#ovfl_bit,FPCR_ENABLE(%a6) |test FPCR for ovfl enabled
-	beqs	ovf_dis
-
-ovf_ena:
-	clrl	FP_SCR1(%a6)		|set exceptional operand
-	clrl	FP_SCR1+4(%a6)
-	clrl	FP_SCR1+8(%a6)
-
-	bfclr	STAG(%a6){#5:#3}		|clear wbtm66,wbtm1,wbtm0
-	bclrb	#wbtemp15_bit,WB_BYTE(%a6) |clear wbtemp15
-	bsetb	#sticky_bit,STICKY(%a6)	|set sticky bit
-
-	bclrb	#E1,E_BYTE(%a6)
-|					;fall through to disabled case
-
-| For disabled overflow call 'ovf_r_k'.  This routine loads the
-| correct result based on the rounding precision, destination
-| format, rounding mode and sign.
-|
-ovf_dis:
-	bsr	ovf_r_k			|returns unsigned ETEMP_EX
-|					;and sets FPSR_CC accordingly.
-	bfclr	ETEMP_SGN(%a6){#0:#8}	|fix sign
-	beqs	ovf_pos
-	bsetb	#sign_bit,ETEMP_EX(%a6)
-	bsetb	#sign_bit,FP_SCR1(%a6)	|set exceptional operand sign
-ovf_pos:
-	fmovemx ETEMP(%a6),%fp0-%fp0		|move the result to fp0
-	rts
-
-
-|
-|	INEX2 exception
-|
-| The inex2 and ainex bits are set.
-|
-t_inx2:
-	orl	#inx2a_mask,USER_FPSR(%a6) |set INEX2, AINEX
-	rts
-
-|
-|	Force Inex2
-|
-| This routine is called by the transcendental routines to force
-| the inex2 exception bits set in the FPSR.  If the underflow bit
-| is set, but the underflow trap was not taken, the aunfl bit in
-| the FPSR must be set.
-|
-t_frcinx:
-	orl	#inx2a_mask,USER_FPSR(%a6) |set INEX2, AINEX
-	btstb	#unfl_bit,FPSR_EXCEPT(%a6) |test for unfl bit set
-	beqs	no_uacc1		|if clear, do not set aunfl
-	bsetb	#aunfl_bit,FPSR_AEXCEPT(%a6)
-no_uacc1:
-	rts
-
-|
-|	DST_NAN
-|
-| Determine if the destination nan is signalling or non-signalling,
-| and set the FPSR bits accordingly.  See the MC68040 User's Manual
-| section 3.2.2.5 NOT-A-NUMBERS.
-|
-dst_nan:
-	btstb	#sign_bit,FPTEMP_EX(%a6) |test sign of nan
-	beqs	dst_pos			|if clr, it was positive
-	bsetb	#neg_bit,FPSR_CC(%a6)	|set N bit
-dst_pos:
-	btstb	#signan_bit,FPTEMP_HI(%a6) |check if signalling
-	beqs	dst_snan		|branch if signalling
-
-	fmovel	%d1,%fpcr			|restore user's rmode/prec
-	fmovex FPTEMP(%a6),%fp0		|return the non-signalling nan
-|
-| Check the source nan.  If it is signalling, snan will be reported.
-|
-	moveb	STAG(%a6),%d0
-	andib	#0xe0,%d0
-	cmpib	#0x60,%d0
-	bnes	no_snan
-	btstb	#signan_bit,ETEMP_HI(%a6) |check if signalling
-	bnes	no_snan
-	orl	#snaniop_mask,USER_FPSR(%a6) |set NAN, SNAN, AIOP
-no_snan:
-	rts
-
-dst_snan:
-	btstb	#snan_bit,FPCR_ENABLE(%a6) |check if trap enabled
-	beqs	dst_dis			|branch if disabled
-
-	orb	#nan_tag,DTAG(%a6)	|set up dtag for nan
-	st	STORE_FLG(%a6)		|do not store a result
-	orl	#snaniop_mask,USER_FPSR(%a6) |set NAN, SNAN, AIOP
-	rts
-
-dst_dis:
-	bsetb	#signan_bit,FPTEMP_HI(%a6) |set SNAN bit in sop
-	fmovel	%d1,%fpcr			|restore user's rmode/prec
-	fmovex FPTEMP(%a6),%fp0		|load non-sign. nan
-	orl	#snaniop_mask,USER_FPSR(%a6) |set NAN, SNAN, AIOP
-	rts
-
-|
-|	SRC_NAN
-|
-| Determine if the source nan is signalling or non-signalling,
-| and set the FPSR bits accordingly.  See the MC68040 User's Manual
-| section 3.2.2.5 NOT-A-NUMBERS.
-|
-src_nan:
-	btstb	#sign_bit,ETEMP_EX(%a6) |test sign of nan
-	beqs	src_pos			|if clr, it was positive
-	bsetb	#neg_bit,FPSR_CC(%a6)	|set N bit
-src_pos:
-	btstb	#signan_bit,ETEMP_HI(%a6) |check if signalling
-	beqs	src_snan		|branch if signalling
-	fmovel	%d1,%fpcr			|restore user's rmode/prec
-	fmovex ETEMP(%a6),%fp0		|return the non-signalling nan
-	rts
-
-src_snan:
-	btstb	#snan_bit,FPCR_ENABLE(%a6) |check if trap enabled
-	beqs	src_dis			|branch if disabled
-	bsetb	#signan_bit,ETEMP_HI(%a6) |set SNAN bit in sop
-	orb	#norm_tag,DTAG(%a6)	|set up dtag for norm
-	orb	#nan_tag,STAG(%a6)	|set up stag for nan
-	st	STORE_FLG(%a6)		|do not store a result
-	orl	#snaniop_mask,USER_FPSR(%a6) |set NAN, SNAN, AIOP
-	rts
-
-src_dis:
-	bsetb	#signan_bit,ETEMP_HI(%a6) |set SNAN bit in sop
-	fmovel	%d1,%fpcr			|restore user's rmode/prec
-	fmovex ETEMP(%a6),%fp0		|load non-sign. nan
-	orl	#snaniop_mask,USER_FPSR(%a6) |set NAN, SNAN, AIOP
-	rts
-
-|
-| For all functions that have a denormalized input and that f(x)=x,
-| this is the entry point
-|
-t_extdnrm:
-	orl	#unfinx_mask,USER_FPSR(%a6)
-|					;set UNFL, INEX2, AUNFL, AINEX
-	bras	xdnrm_con
-|
-| Entry point for scale with extended denorm.  The function does
-| not set inex2, aunfl, or ainex.
-|
-t_resdnrm:
-	orl	#unfl_mask,USER_FPSR(%a6)
-
-xdnrm_con:
-	btstb	#unfl_bit,FPCR_ENABLE(%a6)
-	beqs	xdnrm_dis
-
-|
-| If exceptions are enabled, the additional task of setting up WBTEMP
-| is needed so that when the underflow exception handler is entered,
-| the user perceives no difference between what the 040 provides vs.
-| what the FPSP provides.
-|
-xdnrm_ena:
-	movel	%a0,-(%a7)
-
-	movel	LOCAL_EX(%a0),FP_SCR1(%a6)
-	movel	LOCAL_HI(%a0),FP_SCR1+4(%a6)
-	movel	LOCAL_LO(%a0),FP_SCR1+8(%a6)
-
-	lea	FP_SCR1(%a6),%a0
-
-	bclrb	#sign_bit,LOCAL_EX(%a0)
-	sne	LOCAL_SGN(%a0)		|convert to internal ext format
-	tstw	LOCAL_EX(%a0)		|check if input is denorm
-	beqs	xdnrm_dn		|if so, skip nrm_set
-	bsr	nrm_set			|normalize the result (exponent
-|					;will be negative
-xdnrm_dn:
-	bclrb	#sign_bit,LOCAL_EX(%a0)	|take off false sign
-	bfclr	LOCAL_SGN(%a0){#0:#8}	|change back to IEEE ext format
-	beqs	xdep
-	bsetb	#sign_bit,LOCAL_EX(%a0)
-xdep:
-	bfclr	STAG(%a6){#5:#3}		|clear wbtm66,wbtm1,wbtm0
-	bsetb	#wbtemp15_bit,WB_BYTE(%a6) |set wbtemp15
-	bclrb	#sticky_bit,STICKY(%a6)	|clear sticky bit
-	bclrb	#E1,E_BYTE(%a6)
-	movel	(%a7)+,%a0
-xdnrm_dis:
-	bfextu	FPCR_MODE(%a6){#0:#2},%d0	|get round precision
-	bnes	not_ext			|if not round extended, store
-|					;IEEE defaults
-is_ext:
-	btstb	#sign_bit,LOCAL_EX(%a0)
-	beqs	xdnrm_store
-
-	bsetb	#neg_bit,FPSR_CC(%a6)	|set N bit in FPSR_CC
-
-	bras	xdnrm_store
-
-not_ext:
-	bclrb	#sign_bit,LOCAL_EX(%a0)
-	sne	LOCAL_SGN(%a0)		|convert to internal ext format
-	bsr	unf_sub			|returns IEEE result pointed by
-|					;a0; sets FPSR_CC accordingly
-	bfclr	LOCAL_SGN(%a0){#0:#8}	|convert back to IEEE ext format
-	beqs	xdnrm_store
-	bsetb	#sign_bit,LOCAL_EX(%a0)
-xdnrm_store:
-	fmovemx (%a0),%fp0-%fp0		|store result in fp0
-	rts
-
-|
-| This subroutine is used for dyadic operations that use an extended
-| denorm within the kernel. The approach used is to capture the frame,
-| fix/restore.
-|
-	.global	t_avoid_unsupp
-t_avoid_unsupp:
-	link	%a2,#-LOCAL_SIZE		|so that a2 fpsp.h negative
-|					;offsets may be used
-	fsave	-(%a7)
-	tstb	1(%a7)			|check if idle, exit if so
-	beq	idle_end
-	btstb	#E1,E_BYTE(%a2)		|check for an E1 exception if
-|					;enabled, there is an unsupp
-	beq	end_avun		|else, exit
-	btstb	#7,DTAG(%a2)		|check for denorm destination
-	beqs	src_den			|else, must be a source denorm
-|
-| handle destination denorm
-|
-	lea	FPTEMP(%a2),%a0
-	btstb	#sign_bit,LOCAL_EX(%a0)
-	sne	LOCAL_SGN(%a0)		|convert to internal ext format
-	bclrb	#7,DTAG(%a2)		|set DTAG to norm
-	bsr	nrm_set			|normalize result, exponent
-|					;will become negative
-	bclrb	#sign_bit,LOCAL_EX(%a0)	|get rid of fake sign
-	bfclr	LOCAL_SGN(%a0){#0:#8}	|convert back to IEEE ext format
-	beqs	ck_src_den		|check if source is also denorm
-	bsetb	#sign_bit,LOCAL_EX(%a0)
-ck_src_den:
-	btstb	#7,STAG(%a2)
-	beqs	end_avun
-src_den:
-	lea	ETEMP(%a2),%a0
-	btstb	#sign_bit,LOCAL_EX(%a0)
-	sne	LOCAL_SGN(%a0)		|convert to internal ext format
-	bclrb	#7,STAG(%a2)		|set STAG to norm
-	bsr	nrm_set			|normalize result, exponent
-|					;will become negative
-	bclrb	#sign_bit,LOCAL_EX(%a0)	|get rid of fake sign
-	bfclr	LOCAL_SGN(%a0){#0:#8}	|convert back to IEEE ext format
-	beqs	den_com
-	bsetb	#sign_bit,LOCAL_EX(%a0)
-den_com:
-	moveb	#0xfe,CU_SAVEPC(%a2)	|set continue frame
-	clrw	NMNEXC(%a2)		|clear NMNEXC
-	bclrb	#E1,E_BYTE(%a2)
-|	fmove.l	%FPSR,FPSR_SHADOW(%a2)
-|	bset.b	#SFLAG,E_BYTE(%a2)
-|	bset.b	#XFLAG,T_BYTE(%a2)
-end_avun:
-	frestore (%a7)+
-	unlk	%a2
-	rts
-idle_end:
-	addl	#4,%a7
-	unlk	%a2
-	rts
-	|end
diff --git a/ANDROID_3.4.5/arch/m68k/fpsp040/res_func.S b/ANDROID_3.4.5/arch/m68k/fpsp040/res_func.S
deleted file mode 100644
index d9cdf438..00000000
--- a/ANDROID_3.4.5/arch/m68k/fpsp040/res_func.S
+++ /dev/null
@@ -1,2039 +0,0 @@
-|
-|	res_func.sa 3.9 7/29/91
-|
-| Normalizes denormalized numbers if necessary and updates the
-| stack frame.  The function is then restored back into the
-| machine and the 040 completes the operation.  This routine
-| is only used by the unsupported data type/format handler.
-| (Exception vector 55).
-|
-| For packed move out (fmove.p fpm,<ea>) the operation is
-| completed here; data is packed and moved to user memory.
-| The stack is restored to the 040 only in the case of a
-| reportable exception in the conversion.
-|
-|
-|		Copyright (C) Motorola, Inc. 1990
-|			All Rights Reserved
-|
-|       For details on the license for this file, please see the
-|       file, README, in this same directory.
-
-RES_FUNC:    |idnt    2,1 | Motorola 040 Floating Point Software Package
-
-	|section	8
-
-#include "fpsp.h"
-
-sp_bnds:	.short	0x3f81,0x407e
-		.short	0x3f6a,0x0000
-dp_bnds:	.short	0x3c01,0x43fe
-		.short	0x3bcd,0x0000
-
-	|xref	mem_write
-	|xref	bindec
-	|xref	get_fline
-	|xref	round
-	|xref	denorm
-	|xref	dest_ext
-	|xref	dest_dbl
-	|xref	dest_sgl
-	|xref	unf_sub
-	|xref	nrm_set
-	|xref	dnrm_lp
-	|xref	ovf_res
-	|xref	reg_dest
-	|xref	t_ovfl
-	|xref	t_unfl
-
-	.global	res_func
-	.global	p_move
-
-res_func:
-	clrb	DNRM_FLG(%a6)
-	clrb	RES_FLG(%a6)
-	clrb	CU_ONLY(%a6)
-	tstb	DY_MO_FLG(%a6)
-	beqs	monadic
-dyadic:
-	btstb	#7,DTAG(%a6)	|if dop = norm=000, zero=001,
-|				;inf=010 or nan=011
-	beqs	monadic		|then branch
-|				;else denorm
-| HANDLE DESTINATION DENORM HERE
-|				;set dtag to norm
-|				;write the tag & fpte15 to the fstack
-	leal	FPTEMP(%a6),%a0
-
-	bclrb	#sign_bit,LOCAL_EX(%a0)
-	sne	LOCAL_SGN(%a0)
-
-	bsr	nrm_set		|normalize number (exp will go negative)
-	bclrb	#sign_bit,LOCAL_EX(%a0) |get rid of false sign
-	bfclr	LOCAL_SGN(%a0){#0:#8}	|change back to IEEE ext format
-	beqs	dpos
-	bsetb	#sign_bit,LOCAL_EX(%a0)
-dpos:
-	bfclr	DTAG(%a6){#0:#4}	|set tag to normalized, FPTE15 = 0
-	bsetb	#4,DTAG(%a6)	|set FPTE15
-	orb	#0x0f,DNRM_FLG(%a6)
-monadic:
-	leal	ETEMP(%a6),%a0
-	btstb	#direction_bit,CMDREG1B(%a6)	|check direction
-	bne	opclass3			|it is a mv out
-|
-| At this point, only opclass 0 and 2 possible
-|
-	btstb	#7,STAG(%a6)	|if sop = norm=000, zero=001,
-|				;inf=010 or nan=011
-	bne	mon_dnrm	|else denorm
-	tstb	DY_MO_FLG(%a6)	|all cases of dyadic instructions would
-	bne	normal		|require normalization of denorm
-
-| At this point:
-|	monadic instructions:	fabs  = $18  fneg   = $1a  ftst   = $3a
-|				fmove = $00  fsmove = $40  fdmove = $44
-|				fsqrt = $05* fssqrt = $41  fdsqrt = $45
-|				(*fsqrt reencoded to $05)
-|
-	movew	CMDREG1B(%a6),%d0	|get command register
-	andil	#0x7f,%d0			|strip to only command word
-|
-| At this point, fabs, fneg, fsmove, fdmove, ftst, fsqrt, fssqrt, and
-| fdsqrt are possible.
-| For cases fabs, fneg, fsmove, and fdmove goto spos (do not normalize)
-| For cases fsqrt, fssqrt, and fdsqrt goto nrm_src (do normalize)
-|
-	btstl	#0,%d0
-	bne	normal			|weed out fsqrt instructions
-|
-| cu_norm handles fmove in instructions with normalized inputs.
-| The routine round is used to correctly round the input for the
-| destination precision and mode.
-|
-cu_norm:
-	st	CU_ONLY(%a6)		|set cu-only inst flag
-	movew	CMDREG1B(%a6),%d0
-	andib	#0x3b,%d0		|isolate bits to select inst
-	tstb	%d0
-	beql	cu_nmove	|if zero, it is an fmove
-	cmpib	#0x18,%d0
-	beql	cu_nabs		|if $18, it is fabs
-	cmpib	#0x1a,%d0
-	beql	cu_nneg		|if $1a, it is fneg
-|
-| Inst is ftst.  Check the source operand and set the cc's accordingly.
-| No write is done, so simply rts.
-|
-cu_ntst:
-	movew	LOCAL_EX(%a0),%d0
-	bclrl	#15,%d0
-	sne	LOCAL_SGN(%a0)
-	beqs	cu_ntpo
-	orl	#neg_mask,USER_FPSR(%a6) |set N
-cu_ntpo:
-	cmpiw	#0x7fff,%d0	|test for inf/nan
-	bnes	cu_ntcz
-	tstl	LOCAL_HI(%a0)
-	bnes	cu_ntn
-	tstl	LOCAL_LO(%a0)
-	bnes	cu_ntn
-	orl	#inf_mask,USER_FPSR(%a6)
-	rts
-cu_ntn:
-	orl	#nan_mask,USER_FPSR(%a6)
-	movel	ETEMP_EX(%a6),FPTEMP_EX(%a6)	|set up fptemp sign for
-|						;snan handler
-
-	rts
-cu_ntcz:
-	tstl	LOCAL_HI(%a0)
-	bnel	cu_ntsx
-	tstl	LOCAL_LO(%a0)
-	bnel	cu_ntsx
-	orl	#z_mask,USER_FPSR(%a6)
-cu_ntsx:
-	rts
-|
-| Inst is fabs.  Execute the absolute value function on the input.
-| Branch to the fmove code.  If the operand is NaN, do nothing.
-|
-cu_nabs:
-	moveb	STAG(%a6),%d0
-	btstl	#5,%d0			|test for NaN or zero
-	bne	wr_etemp		|if either, simply write it
-	bclrb	#7,LOCAL_EX(%a0)		|do abs
-	bras	cu_nmove		|fmove code will finish
-|
-| Inst is fneg.  Execute the negate value function on the input.
-| Fall though to the fmove code.  If the operand is NaN, do nothing.
-|
-cu_nneg:
-	moveb	STAG(%a6),%d0
-	btstl	#5,%d0			|test for NaN or zero
-	bne	wr_etemp		|if either, simply write it
-	bchgb	#7,LOCAL_EX(%a0)		|do neg
-|
-| Inst is fmove.  This code also handles all result writes.
-| If bit 2 is set, round is forced to double.  If it is clear,
-| and bit 6 is set, round is forced to single.  If both are clear,
-| the round precision is found in the fpcr.  If the rounding precision
-| is double or single, round the result before the write.
-|
-cu_nmove:
-	moveb	STAG(%a6),%d0
-	andib	#0xe0,%d0			|isolate stag bits
-	bne	wr_etemp		|if not norm, simply write it
-	btstb	#2,CMDREG1B+1(%a6)	|check for rd
-	bne	cu_nmrd
-	btstb	#6,CMDREG1B+1(%a6)	|check for rs
-	bne	cu_nmrs
-|
-| The move or operation is not with forced precision.  Test for
-| nan or inf as the input; if so, simply write it to FPn.  Use the
-| FPCR_MODE byte to get rounding on norms and zeros.
-|
-cu_nmnr:
-	bfextu	FPCR_MODE(%a6){#0:#2},%d0
-	tstb	%d0			|check for extended
-	beq	cu_wrexn		|if so, just write result
-	cmpib	#1,%d0			|check for single
-	beq	cu_nmrs			|fall through to double
-|
-| The move is fdmove or round precision is double.
-|
-cu_nmrd:
-	movel	#2,%d0			|set up the size for denorm
-	movew	LOCAL_EX(%a0),%d1		|compare exponent to double threshold
-	andw	#0x7fff,%d1
-	cmpw	#0x3c01,%d1
-	bls	cu_nunfl
-	bfextu	FPCR_MODE(%a6){#2:#2},%d1	|get rmode
-	orl	#0x00020000,%d1		|or in rprec (double)
-	clrl	%d0			|clear g,r,s for round
-	bclrb	#sign_bit,LOCAL_EX(%a0)	|convert to internal format
-	sne	LOCAL_SGN(%a0)
-	bsrl	round
-	bfclr	LOCAL_SGN(%a0){#0:#8}
-	beqs	cu_nmrdc
-	bsetb	#sign_bit,LOCAL_EX(%a0)
-cu_nmrdc:
-	movew	LOCAL_EX(%a0),%d1		|check for overflow
-	andw	#0x7fff,%d1
-	cmpw	#0x43ff,%d1
-	bge	cu_novfl		|take care of overflow case
-	bra	cu_wrexn
-|
-| The move is fsmove or round precision is single.
-|
-cu_nmrs:
-	movel	#1,%d0
-	movew	LOCAL_EX(%a0),%d1
-	andw	#0x7fff,%d1
-	cmpw	#0x3f81,%d1
-	bls	cu_nunfl
-	bfextu	FPCR_MODE(%a6){#2:#2},%d1
-	orl	#0x00010000,%d1
-	clrl	%d0
-	bclrb	#sign_bit,LOCAL_EX(%a0)
-	sne	LOCAL_SGN(%a0)
-	bsrl	round
-	bfclr	LOCAL_SGN(%a0){#0:#8}
-	beqs	cu_nmrsc
-	bsetb	#sign_bit,LOCAL_EX(%a0)
-cu_nmrsc:
-	movew	LOCAL_EX(%a0),%d1
-	andw	#0x7FFF,%d1
-	cmpw	#0x407f,%d1
-	blt	cu_wrexn
-|
-| The operand is above precision boundaries.  Use t_ovfl to
-| generate the correct value.
-|
-cu_novfl:
-	bsr	t_ovfl
-	bra	cu_wrexn
-|
-| The operand is below precision boundaries.  Use denorm to
-| generate the correct value.
-|
-cu_nunfl:
-	bclrb	#sign_bit,LOCAL_EX(%a0)
-	sne	LOCAL_SGN(%a0)
-	bsr	denorm
-	bfclr	LOCAL_SGN(%a0){#0:#8}	|change back to IEEE ext format
-	beqs	cu_nucont
-	bsetb	#sign_bit,LOCAL_EX(%a0)
-cu_nucont:
-	bfextu	FPCR_MODE(%a6){#2:#2},%d1
-	btstb	#2,CMDREG1B+1(%a6)	|check for rd
-	bne	inst_d
-	btstb	#6,CMDREG1B+1(%a6)	|check for rs
-	bne	inst_s
-	swap	%d1
-	moveb	FPCR_MODE(%a6),%d1
-	lsrb	#6,%d1
-	swap	%d1
-	bra	inst_sd
-inst_d:
-	orl	#0x00020000,%d1
-	bra	inst_sd
-inst_s:
-	orl	#0x00010000,%d1
-inst_sd:
-	bclrb	#sign_bit,LOCAL_EX(%a0)
-	sne	LOCAL_SGN(%a0)
-	bsrl	round
-	bfclr	LOCAL_SGN(%a0){#0:#8}
-	beqs	cu_nuflp
-	bsetb	#sign_bit,LOCAL_EX(%a0)
-cu_nuflp:
-	btstb	#inex2_bit,FPSR_EXCEPT(%a6)
-	beqs	cu_nuninx
-	orl	#aunfl_mask,USER_FPSR(%a6) |if the round was inex, set AUNFL
-cu_nuninx:
-	tstl	LOCAL_HI(%a0)		|test for zero
-	bnes	cu_nunzro
-	tstl	LOCAL_LO(%a0)
-	bnes	cu_nunzro
-|
-| The mantissa is zero from the denorm loop.  Check sign and rmode
-| to see if rounding should have occurred which would leave the lsb.
-|
-	movel	USER_FPCR(%a6),%d0
-	andil	#0x30,%d0		|isolate rmode
-	cmpil	#0x20,%d0
-	blts	cu_nzro
-	bnes	cu_nrp
-cu_nrm:
-	tstw	LOCAL_EX(%a0)	|if positive, set lsb
-	bges	cu_nzro
-	btstb	#7,FPCR_MODE(%a6) |check for double
-	beqs	cu_nincs
-	bras	cu_nincd
-cu_nrp:
-	tstw	LOCAL_EX(%a0)	|if positive, set lsb
-	blts	cu_nzro
-	btstb	#7,FPCR_MODE(%a6) |check for double
-	beqs	cu_nincs
-cu_nincd:
-	orl	#0x800,LOCAL_LO(%a0) |inc for double
-	bra	cu_nunzro
-cu_nincs:
-	orl	#0x100,LOCAL_HI(%a0) |inc for single
-	bra	cu_nunzro
-cu_nzro:
-	orl	#z_mask,USER_FPSR(%a6)
-	moveb	STAG(%a6),%d0
-	andib	#0xe0,%d0
-	cmpib	#0x40,%d0		|check if input was tagged zero
-	beqs	cu_numv
-cu_nunzro:
-	orl	#unfl_mask,USER_FPSR(%a6) |set unfl
-cu_numv:
-	movel	(%a0),ETEMP(%a6)
-	movel	4(%a0),ETEMP_HI(%a6)
-	movel	8(%a0),ETEMP_LO(%a6)
-|
-| Write the result to memory, setting the fpsr cc bits.  NaN and Inf
-| bypass cu_wrexn.
-|
-cu_wrexn:
-	tstw	LOCAL_EX(%a0)		|test for zero
-	beqs	cu_wrzero
-	cmpw	#0x8000,LOCAL_EX(%a0)	|test for zero
-	bnes	cu_wreon
-cu_wrzero:
-	orl	#z_mask,USER_FPSR(%a6)	|set Z bit
-cu_wreon:
-	tstw	LOCAL_EX(%a0)
-	bpl	wr_etemp
-	orl	#neg_mask,USER_FPSR(%a6)
-	bra	wr_etemp
-
-|
-| HANDLE SOURCE DENORM HERE
-|
-|				;clear denorm stag to norm
-|				;write the new tag & ete15 to the fstack
-mon_dnrm:
-|
-| At this point, check for the cases in which normalizing the
-| denorm produces incorrect results.
-|
-	tstb	DY_MO_FLG(%a6)	|all cases of dyadic instructions would
-	bnes	nrm_src		|require normalization of denorm
-
-| At this point:
-|	monadic instructions:	fabs  = $18  fneg   = $1a  ftst   = $3a
-|				fmove = $00  fsmove = $40  fdmove = $44
-|				fsqrt = $05* fssqrt = $41  fdsqrt = $45
-|				(*fsqrt reencoded to $05)
-|
-	movew	CMDREG1B(%a6),%d0	|get command register
-	andil	#0x7f,%d0			|strip to only command word
-|
-| At this point, fabs, fneg, fsmove, fdmove, ftst, fsqrt, fssqrt, and
-| fdsqrt are possible.
-| For cases fabs, fneg, fsmove, and fdmove goto spos (do not normalize)
-| For cases fsqrt, fssqrt, and fdsqrt goto nrm_src (do normalize)
-|
-	btstl	#0,%d0
-	bnes	nrm_src		|weed out fsqrt instructions
-	st	CU_ONLY(%a6)	|set cu-only inst flag
-	bra	cu_dnrm		|fmove, fabs, fneg, ftst
-|				;cases go to cu_dnrm
-nrm_src:
-	bclrb	#sign_bit,LOCAL_EX(%a0)
-	sne	LOCAL_SGN(%a0)
-	bsr	nrm_set		|normalize number (exponent will go
-|				; negative)
-	bclrb	#sign_bit,LOCAL_EX(%a0) |get rid of false sign
-
-	bfclr	LOCAL_SGN(%a0){#0:#8}	|change back to IEEE ext format
-	beqs	spos
-	bsetb	#sign_bit,LOCAL_EX(%a0)
-spos:
-	bfclr	STAG(%a6){#0:#4}	|set tag to normalized, FPTE15 = 0
-	bsetb	#4,STAG(%a6)	|set ETE15
-	orb	#0xf0,DNRM_FLG(%a6)
-normal:
-	tstb	DNRM_FLG(%a6)	|check if any of the ops were denorms
-	bne	ck_wrap		|if so, check if it is a potential
-|				;wrap-around case
-fix_stk:
-	moveb	#0xfe,CU_SAVEPC(%a6)
-	bclrb	#E1,E_BYTE(%a6)
-
-	clrw	NMNEXC(%a6)
-
-	st	RES_FLG(%a6)	|indicate that a restore is needed
-	rts
-
-|
-| cu_dnrm handles all cu-only instructions (fmove, fabs, fneg, and
-| ftst) completely in software without an frestore to the 040.
-|
-cu_dnrm:
-	st	CU_ONLY(%a6)
-	movew	CMDREG1B(%a6),%d0
-	andib	#0x3b,%d0		|isolate bits to select inst
-	tstb	%d0
-	beql	cu_dmove	|if zero, it is an fmove
-	cmpib	#0x18,%d0
-	beql	cu_dabs		|if $18, it is fabs
-	cmpib	#0x1a,%d0
-	beql	cu_dneg		|if $1a, it is fneg
-|
-| Inst is ftst.  Check the source operand and set the cc's accordingly.
-| No write is done, so simply rts.
-|
-cu_dtst:
-	movew	LOCAL_EX(%a0),%d0
-	bclrl	#15,%d0
-	sne	LOCAL_SGN(%a0)
-	beqs	cu_dtpo
-	orl	#neg_mask,USER_FPSR(%a6) |set N
-cu_dtpo:
-	cmpiw	#0x7fff,%d0	|test for inf/nan
-	bnes	cu_dtcz
-	tstl	LOCAL_HI(%a0)
-	bnes	cu_dtn
-	tstl	LOCAL_LO(%a0)
-	bnes	cu_dtn
-	orl	#inf_mask,USER_FPSR(%a6)
-	rts
-cu_dtn:
-	orl	#nan_mask,USER_FPSR(%a6)
-	movel	ETEMP_EX(%a6),FPTEMP_EX(%a6)	|set up fptemp sign for
-|						;snan handler
-	rts
-cu_dtcz:
-	tstl	LOCAL_HI(%a0)
-	bnel	cu_dtsx
-	tstl	LOCAL_LO(%a0)
-	bnel	cu_dtsx
-	orl	#z_mask,USER_FPSR(%a6)
-cu_dtsx:
-	rts
-|
-| Inst is fabs.  Execute the absolute value function on the input.
-| Branch to the fmove code.
-|
-cu_dabs:
-	bclrb	#7,LOCAL_EX(%a0)		|do abs
-	bras	cu_dmove		|fmove code will finish
-|
-| Inst is fneg.  Execute the negate value function on the input.
-| Fall though to the fmove code.
-|
-cu_dneg:
-	bchgb	#7,LOCAL_EX(%a0)		|do neg
-|
-| Inst is fmove.  This code also handles all result writes.
-| If bit 2 is set, round is forced to double.  If it is clear,
-| and bit 6 is set, round is forced to single.  If both are clear,
-| the round precision is found in the fpcr.  If the rounding precision
-| is double or single, the result is zero, and the mode is checked
-| to determine if the lsb of the result should be set.
-|
-cu_dmove:
-	btstb	#2,CMDREG1B+1(%a6)	|check for rd
-	bne	cu_dmrd
-	btstb	#6,CMDREG1B+1(%a6)	|check for rs
-	bne	cu_dmrs
-|
-| The move or operation is not with forced precision.  Use the
-| FPCR_MODE byte to get rounding.
-|
-cu_dmnr:
-	bfextu	FPCR_MODE(%a6){#0:#2},%d0
-	tstb	%d0			|check for extended
-	beq	cu_wrexd		|if so, just write result
-	cmpib	#1,%d0			|check for single
-	beq	cu_dmrs			|fall through to double
-|
-| The move is fdmove or round precision is double.  Result is zero.
-| Check rmode for rp or rm and set lsb accordingly.
-|
-cu_dmrd:
-	bfextu	FPCR_MODE(%a6){#2:#2},%d1	|get rmode
-	tstw	LOCAL_EX(%a0)		|check sign
-	blts	cu_dmdn
-	cmpib	#3,%d1			|check for rp
-	bne	cu_dpd			|load double pos zero
-	bra	cu_dpdr			|load double pos zero w/lsb
-cu_dmdn:
-	cmpib	#2,%d1			|check for rm
-	bne	cu_dnd			|load double neg zero
-	bra	cu_dndr			|load double neg zero w/lsb
-|
-| The move is fsmove or round precision is single.  Result is zero.
-| Check for rp or rm and set lsb accordingly.
-|
-cu_dmrs:
-	bfextu	FPCR_MODE(%a6){#2:#2},%d1	|get rmode
-	tstw	LOCAL_EX(%a0)		|check sign
-	blts	cu_dmsn
-	cmpib	#3,%d1			|check for rp
-	bne	cu_spd			|load single pos zero
-	bra	cu_spdr			|load single pos zero w/lsb
-cu_dmsn:
-	cmpib	#2,%d1			|check for rm
-	bne	cu_snd			|load single neg zero
-	bra	cu_sndr			|load single neg zero w/lsb
-|
-| The precision is extended, so the result in etemp is correct.
-| Simply set unfl (not inex2 or aunfl) and write the result to
-| the correct fp register.
-cu_wrexd:
-	orl	#unfl_mask,USER_FPSR(%a6)
-	tstw	LOCAL_EX(%a0)
-	beq	wr_etemp
-	orl	#neg_mask,USER_FPSR(%a6)
-	bra	wr_etemp
-|
-| These routines write +/- zero in double format.  The routines
-| cu_dpdr and cu_dndr set the double lsb.
-|
-cu_dpd:
-	movel	#0x3c010000,LOCAL_EX(%a0)	|force pos double zero
-	clrl	LOCAL_HI(%a0)
-	clrl	LOCAL_LO(%a0)
-	orl	#z_mask,USER_FPSR(%a6)
-	orl	#unfinx_mask,USER_FPSR(%a6)
-	bra	wr_etemp
-cu_dpdr:
-	movel	#0x3c010000,LOCAL_EX(%a0)	|force pos double zero
-	clrl	LOCAL_HI(%a0)
-	movel	#0x800,LOCAL_LO(%a0)	|with lsb set
-	orl	#unfinx_mask,USER_FPSR(%a6)
-	bra	wr_etemp
-cu_dnd:
-	movel	#0xbc010000,LOCAL_EX(%a0)	|force pos double zero
-	clrl	LOCAL_HI(%a0)
-	clrl	LOCAL_LO(%a0)
-	orl	#z_mask,USER_FPSR(%a6)
-	orl	#neg_mask,USER_FPSR(%a6)
-	orl	#unfinx_mask,USER_FPSR(%a6)
-	bra	wr_etemp
-cu_dndr:
-	movel	#0xbc010000,LOCAL_EX(%a0)	|force pos double zero
-	clrl	LOCAL_HI(%a0)
-	movel	#0x800,LOCAL_LO(%a0)	|with lsb set
-	orl	#neg_mask,USER_FPSR(%a6)
-	orl	#unfinx_mask,USER_FPSR(%a6)
-	bra	wr_etemp
-|
-| These routines write +/- zero in single format.  The routines
-| cu_dpdr and cu_dndr set the single lsb.
-|
-cu_spd:
-	movel	#0x3f810000,LOCAL_EX(%a0)	|force pos single zero
-	clrl	LOCAL_HI(%a0)
-	clrl	LOCAL_LO(%a0)
-	orl	#z_mask,USER_FPSR(%a6)
-	orl	#unfinx_mask,USER_FPSR(%a6)
-	bra	wr_etemp
-cu_spdr:
-	movel	#0x3f810000,LOCAL_EX(%a0)	|force pos single zero
-	movel	#0x100,LOCAL_HI(%a0)	|with lsb set
-	clrl	LOCAL_LO(%a0)
-	orl	#unfinx_mask,USER_FPSR(%a6)
-	bra	wr_etemp
-cu_snd:
-	movel	#0xbf810000,LOCAL_EX(%a0)	|force pos single zero
-	clrl	LOCAL_HI(%a0)
-	clrl	LOCAL_LO(%a0)
-	orl	#z_mask,USER_FPSR(%a6)
-	orl	#neg_mask,USER_FPSR(%a6)
-	orl	#unfinx_mask,USER_FPSR(%a6)
-	bra	wr_etemp
-cu_sndr:
-	movel	#0xbf810000,LOCAL_EX(%a0)	|force pos single zero
-	movel	#0x100,LOCAL_HI(%a0)	|with lsb set
-	clrl	LOCAL_LO(%a0)
-	orl	#neg_mask,USER_FPSR(%a6)
-	orl	#unfinx_mask,USER_FPSR(%a6)
-	bra	wr_etemp
-
-|
-| This code checks for 16-bit overflow conditions on dyadic
-| operations which are not restorable into the floating-point
-| unit and must be completed in software.  Basically, this
-| condition exists with a very large norm and a denorm.  One
-| of the operands must be denormalized to enter this code.
-|
-| Flags used:
-|	DY_MO_FLG contains 0 for monadic op, $ff for dyadic
-|	DNRM_FLG contains $00 for neither op denormalized
-|	                  $0f for the destination op denormalized
-|	                  $f0 for the source op denormalized
-|	                  $ff for both ops denormalized
-|
-| The wrap-around condition occurs for add, sub, div, and cmp
-| when
-|
-|	abs(dest_exp - src_exp) >= $8000
-|
-| and for mul when
-|
-|	(dest_exp + src_exp) < $0
-|
-| we must process the operation here if this case is true.
-|
-| The rts following the frcfpn routine is the exit from res_func
-| for this condition.  The restore flag (RES_FLG) is left clear.
-| No frestore is done unless an exception is to be reported.
-|
-| For fadd:
-|	if(sign_of(dest) != sign_of(src))
-|		replace exponent of src with $3fff (keep sign)
-|		use fpu to perform dest+new_src (user's rmode and X)
-|		clr sticky
-|	else
-|		set sticky
-|	call round with user's precision and mode
-|	move result to fpn and wbtemp
-|
-| For fsub:
-|	if(sign_of(dest) == sign_of(src))
-|		replace exponent of src with $3fff (keep sign)
-|		use fpu to perform dest+new_src (user's rmode and X)
-|		clr sticky
-|	else
-|		set sticky
-|	call round with user's precision and mode
-|	move result to fpn and wbtemp
-|
-| For fdiv/fsgldiv:
-|	if(both operands are denorm)
-|		restore_to_fpu;
-|	if(dest is norm)
-|		force_ovf;
-|	else(dest is denorm)
-|		force_unf:
-|
-| For fcmp:
-|	if(dest is norm)
-|		N = sign_of(dest);
-|	else(dest is denorm)
-|		N = sign_of(src);
-|
-| For fmul:
-|	if(both operands are denorm)
-|		force_unf;
-|	if((dest_exp + src_exp) < 0)
-|		force_unf:
-|	else
-|		restore_to_fpu;
-|
-| local equates:
-	.set	addcode,0x22
-	.set	subcode,0x28
-	.set	mulcode,0x23
-	.set	divcode,0x20
-	.set	cmpcode,0x38
-ck_wrap:
-	| tstb	DY_MO_FLG(%a6)	;check for fsqrt
-	beq	fix_stk		|if zero, it is fsqrt
-	movew	CMDREG1B(%a6),%d0
-	andiw	#0x3b,%d0		|strip to command bits
-	cmpiw	#addcode,%d0
-	beq	wrap_add
-	cmpiw	#subcode,%d0
-	beq	wrap_sub
-	cmpiw	#mulcode,%d0
-	beq	wrap_mul
-	cmpiw	#cmpcode,%d0
-	beq	wrap_cmp
-|
-| Inst is fdiv.
-|
-wrap_div:
-	cmpb	#0xff,DNRM_FLG(%a6) |if both ops denorm,
-	beq	fix_stk		 |restore to fpu
-|
-| One of the ops is denormalized.  Test for wrap condition
-| and force the result.
-|
-	cmpb	#0x0f,DNRM_FLG(%a6) |check for dest denorm
-	bnes	div_srcd
-div_destd:
-	bsrl	ckinf_ns
-	bne	fix_stk
-	bfextu	ETEMP_EX(%a6){#1:#15},%d0	|get src exp (always pos)
-	bfexts	FPTEMP_EX(%a6){#1:#15},%d1	|get dest exp (always neg)
-	subl	%d1,%d0			|subtract dest from src
-	cmpl	#0x7fff,%d0
-	blt	fix_stk			|if less, not wrap case
-	clrb	WBTEMP_SGN(%a6)
-	movew	ETEMP_EX(%a6),%d0		|find the sign of the result
-	movew	FPTEMP_EX(%a6),%d1
-	eorw	%d1,%d0
-	andiw	#0x8000,%d0
-	beq	force_unf
-	st	WBTEMP_SGN(%a6)
-	bra	force_unf
-
-ckinf_ns:
-	moveb	STAG(%a6),%d0		|check source tag for inf or nan
-	bra	ck_in_com
-ckinf_nd:
-	moveb	DTAG(%a6),%d0		|check destination tag for inf or nan
-ck_in_com:
-	andib	#0x60,%d0			|isolate tag bits
-	cmpb	#0x40,%d0			|is it inf?
-	beq	nan_or_inf		|not wrap case
-	cmpb	#0x60,%d0			|is it nan?
-	beq	nan_or_inf		|yes, not wrap case?
-	cmpb	#0x20,%d0			|is it a zero?
-	beq	nan_or_inf		|yes
-	clrl	%d0
-	rts				|then ; it is either a zero of norm,
-|					;check wrap case
-nan_or_inf:
-	moveql	#-1,%d0
-	rts
-
-
-
-div_srcd:
-	bsrl	ckinf_nd
-	bne	fix_stk
-	bfextu	FPTEMP_EX(%a6){#1:#15},%d0	|get dest exp (always pos)
-	bfexts	ETEMP_EX(%a6){#1:#15},%d1	|get src exp (always neg)
-	subl	%d1,%d0			|subtract src from dest
-	cmpl	#0x8000,%d0
-	blt	fix_stk			|if less, not wrap case
-	clrb	WBTEMP_SGN(%a6)
-	movew	ETEMP_EX(%a6),%d0		|find the sign of the result
-	movew	FPTEMP_EX(%a6),%d1
-	eorw	%d1,%d0
-	andiw	#0x8000,%d0
-	beqs	force_ovf
-	st	WBTEMP_SGN(%a6)
-|
-| This code handles the case of the instruction resulting in
-| an overflow condition.
-|
-force_ovf:
-	bclrb	#E1,E_BYTE(%a6)
-	orl	#ovfl_inx_mask,USER_FPSR(%a6)
-	clrw	NMNEXC(%a6)
-	leal	WBTEMP(%a6),%a0		|point a0 to memory location
-	movew	CMDREG1B(%a6),%d0
-	btstl	#6,%d0			|test for forced precision
-	beqs	frcovf_fpcr
-	btstl	#2,%d0			|check for double
-	bnes	frcovf_dbl
-	movel	#0x1,%d0			|inst is forced single
-	bras	frcovf_rnd
-frcovf_dbl:
-	movel	#0x2,%d0			|inst is forced double
-	bras	frcovf_rnd
-frcovf_fpcr:
-	bfextu	FPCR_MODE(%a6){#0:#2},%d0	|inst not forced - use fpcr prec
-frcovf_rnd:
-
-| The 881/882 does not set inex2 for the following case, so the
-| line is commented out to be compatible with 881/882
-|	tst.b	%d0
-|	beq.b	frcovf_x
-|	or.l	#inex2_mask,USER_FPSR(%a6) ;if prec is s or d, set inex2
-
-|frcovf_x:
-	bsrl	ovf_res			|get correct result based on
-|					;round precision/mode.  This
-|					;sets FPSR_CC correctly
-|					;returns in external format
-	bfclr	WBTEMP_SGN(%a6){#0:#8}
-	beq	frcfpn
-	bsetb	#sign_bit,WBTEMP_EX(%a6)
-	bra	frcfpn
-|
-| Inst is fadd.
-|
-wrap_add:
-	cmpb	#0xff,DNRM_FLG(%a6) |if both ops denorm,
-	beq	fix_stk		 |restore to fpu
-|
-| One of the ops is denormalized.  Test for wrap condition
-| and complete the instruction.
-|
-	cmpb	#0x0f,DNRM_FLG(%a6) |check for dest denorm
-	bnes	add_srcd
-add_destd:
-	bsrl	ckinf_ns
-	bne	fix_stk
-	bfextu	ETEMP_EX(%a6){#1:#15},%d0	|get src exp (always pos)
-	bfexts	FPTEMP_EX(%a6){#1:#15},%d1	|get dest exp (always neg)
-	subl	%d1,%d0			|subtract dest from src
-	cmpl	#0x8000,%d0
-	blt	fix_stk			|if less, not wrap case
-	bra	add_wrap
-add_srcd:
-	bsrl	ckinf_nd
-	bne	fix_stk
-	bfextu	FPTEMP_EX(%a6){#1:#15},%d0	|get dest exp (always pos)
-	bfexts	ETEMP_EX(%a6){#1:#15},%d1	|get src exp (always neg)
-	subl	%d1,%d0			|subtract src from dest
-	cmpl	#0x8000,%d0
-	blt	fix_stk			|if less, not wrap case
-|
-| Check the signs of the operands.  If they are unlike, the fpu
-| can be used to add the norm and 1.0 with the sign of the
-| denorm and it will correctly generate the result in extended
-| precision.  We can then call round with no sticky and the result
-| will be correct for the user's rounding mode and precision.  If
-| the signs are the same, we call round with the sticky bit set
-| and the result will be correct for the user's rounding mode and
-| precision.
-|
-add_wrap:
-	movew	ETEMP_EX(%a6),%d0
-	movew	FPTEMP_EX(%a6),%d1
-	eorw	%d1,%d0
-	andiw	#0x8000,%d0
-	beq	add_same
-|
-| The signs are unlike.
-|
-	cmpb	#0x0f,DNRM_FLG(%a6) |is dest the denorm?
-	bnes	add_u_srcd
-	movew	FPTEMP_EX(%a6),%d0
-	andiw	#0x8000,%d0
-	orw	#0x3fff,%d0	|force the exponent to +/- 1
-	movew	%d0,FPTEMP_EX(%a6) |in the denorm
-	movel	USER_FPCR(%a6),%d0
-	andil	#0x30,%d0
-	fmovel	%d0,%fpcr		|set up users rmode and X
-	fmovex	ETEMP(%a6),%fp0
-	faddx	FPTEMP(%a6),%fp0
-	leal	WBTEMP(%a6),%a0	|point a0 to wbtemp in frame
-	fmovel	%fpsr,%d1
-	orl	%d1,USER_FPSR(%a6) |capture cc's and inex from fadd
-	fmovex	%fp0,WBTEMP(%a6)	|write result to memory
-	lsrl	#4,%d0		|put rmode in lower 2 bits
-	movel	USER_FPCR(%a6),%d1
-	andil	#0xc0,%d1
-	lsrl	#6,%d1		|put precision in upper word
-	swap	%d1
-	orl	%d0,%d1		|set up for round call
-	clrl	%d0		|force sticky to zero
-	bclrb	#sign_bit,WBTEMP_EX(%a6)
-	sne	WBTEMP_SGN(%a6)
-	bsrl	round		|round result to users rmode & prec
-	bfclr	WBTEMP_SGN(%a6){#0:#8}	|convert back to IEEE ext format
-	beq	frcfpnr
-	bsetb	#sign_bit,WBTEMP_EX(%a6)
-	bra	frcfpnr
-add_u_srcd:
-	movew	ETEMP_EX(%a6),%d0
-	andiw	#0x8000,%d0
-	orw	#0x3fff,%d0	|force the exponent to +/- 1
-	movew	%d0,ETEMP_EX(%a6) |in the denorm
-	movel	USER_FPCR(%a6),%d0
-	andil	#0x30,%d0
-	fmovel	%d0,%fpcr		|set up users rmode and X
-	fmovex	ETEMP(%a6),%fp0
-	faddx	FPTEMP(%a6),%fp0
-	fmovel	%fpsr,%d1
-	orl	%d1,USER_FPSR(%a6) |capture cc's and inex from fadd
-	leal	WBTEMP(%a6),%a0	|point a0 to wbtemp in frame
-	fmovex	%fp0,WBTEMP(%a6)	|write result to memory
-	lsrl	#4,%d0		|put rmode in lower 2 bits
-	movel	USER_FPCR(%a6),%d1
-	andil	#0xc0,%d1
-	lsrl	#6,%d1		|put precision in upper word
-	swap	%d1
-	orl	%d0,%d1		|set up for round call
-	clrl	%d0		|force sticky to zero
-	bclrb	#sign_bit,WBTEMP_EX(%a6)
-	sne	WBTEMP_SGN(%a6)	|use internal format for round
-	bsrl	round		|round result to users rmode & prec
-	bfclr	WBTEMP_SGN(%a6){#0:#8}	|convert back to IEEE ext format
-	beq	frcfpnr
-	bsetb	#sign_bit,WBTEMP_EX(%a6)
-	bra	frcfpnr
-|
-| Signs are alike:
-|
-add_same:
-	cmpb	#0x0f,DNRM_FLG(%a6) |is dest the denorm?
-	bnes	add_s_srcd
-add_s_destd:
-	leal	ETEMP(%a6),%a0
-	movel	USER_FPCR(%a6),%d0
-	andil	#0x30,%d0
-	lsrl	#4,%d0		|put rmode in lower 2 bits
-	movel	USER_FPCR(%a6),%d1
-	andil	#0xc0,%d1
-	lsrl	#6,%d1		|put precision in upper word
-	swap	%d1
-	orl	%d0,%d1		|set up for round call
-	movel	#0x20000000,%d0	|set sticky for round
-	bclrb	#sign_bit,ETEMP_EX(%a6)
-	sne	ETEMP_SGN(%a6)
-	bsrl	round		|round result to users rmode & prec
-	bfclr	ETEMP_SGN(%a6){#0:#8}	|convert back to IEEE ext format
-	beqs	add_s_dclr
-	bsetb	#sign_bit,ETEMP_EX(%a6)
-add_s_dclr:
-	leal	WBTEMP(%a6),%a0
-	movel	ETEMP(%a6),(%a0)	|write result to wbtemp
-	movel	ETEMP_HI(%a6),4(%a0)
-	movel	ETEMP_LO(%a6),8(%a0)
-	tstw	ETEMP_EX(%a6)
-	bgt	add_ckovf
-	orl	#neg_mask,USER_FPSR(%a6)
-	bra	add_ckovf
-add_s_srcd:
-	leal	FPTEMP(%a6),%a0
-	movel	USER_FPCR(%a6),%d0
-	andil	#0x30,%d0
-	lsrl	#4,%d0		|put rmode in lower 2 bits
-	movel	USER_FPCR(%a6),%d1
-	andil	#0xc0,%d1
-	lsrl	#6,%d1		|put precision in upper word
-	swap	%d1
-	orl	%d0,%d1		|set up for round call
-	movel	#0x20000000,%d0	|set sticky for round
-	bclrb	#sign_bit,FPTEMP_EX(%a6)
-	sne	FPTEMP_SGN(%a6)
-	bsrl	round		|round result to users rmode & prec
-	bfclr	FPTEMP_SGN(%a6){#0:#8}	|convert back to IEEE ext format
-	beqs	add_s_sclr
-	bsetb	#sign_bit,FPTEMP_EX(%a6)
-add_s_sclr:
-	leal	WBTEMP(%a6),%a0
-	movel	FPTEMP(%a6),(%a0)	|write result to wbtemp
-	movel	FPTEMP_HI(%a6),4(%a0)
-	movel	FPTEMP_LO(%a6),8(%a0)
-	tstw	FPTEMP_EX(%a6)
-	bgt	add_ckovf
-	orl	#neg_mask,USER_FPSR(%a6)
-add_ckovf:
-	movew	WBTEMP_EX(%a6),%d0
-	andiw	#0x7fff,%d0
-	cmpiw	#0x7fff,%d0
-	bne	frcfpnr
-|
-| The result has overflowed to $7fff exponent.  Set I, ovfl,
-| and aovfl, and clr the mantissa (incorrectly set by the
-| round routine.)
-|
-	orl	#inf_mask+ovfl_inx_mask,USER_FPSR(%a6)
-	clrl	4(%a0)
-	bra	frcfpnr
-|
-| Inst is fsub.
-|
-wrap_sub:
-	cmpb	#0xff,DNRM_FLG(%a6) |if both ops denorm,
-	beq	fix_stk		 |restore to fpu
-|
-| One of the ops is denormalized.  Test for wrap condition
-| and complete the instruction.
-|
-	cmpb	#0x0f,DNRM_FLG(%a6) |check for dest denorm
-	bnes	sub_srcd
-sub_destd:
-	bsrl	ckinf_ns
-	bne	fix_stk
-	bfextu	ETEMP_EX(%a6){#1:#15},%d0	|get src exp (always pos)
-	bfexts	FPTEMP_EX(%a6){#1:#15},%d1	|get dest exp (always neg)
-	subl	%d1,%d0			|subtract src from dest
-	cmpl	#0x8000,%d0
-	blt	fix_stk			|if less, not wrap case
-	bra	sub_wrap
-sub_srcd:
-	bsrl	ckinf_nd
-	bne	fix_stk
-	bfextu	FPTEMP_EX(%a6){#1:#15},%d0	|get dest exp (always pos)
-	bfexts	ETEMP_EX(%a6){#1:#15},%d1	|get src exp (always neg)
-	subl	%d1,%d0			|subtract dest from src
-	cmpl	#0x8000,%d0
-	blt	fix_stk			|if less, not wrap case
-|
-| Check the signs of the operands.  If they are alike, the fpu
-| can be used to subtract from the norm 1.0 with the sign of the
-| denorm and it will correctly generate the result in extended
-| precision.  We can then call round with no sticky and the result
-| will be correct for the user's rounding mode and precision.  If
-| the signs are unlike, we call round with the sticky bit set
-| and the result will be correct for the user's rounding mode and
-| precision.
-|
-sub_wrap:
-	movew	ETEMP_EX(%a6),%d0
-	movew	FPTEMP_EX(%a6),%d1
-	eorw	%d1,%d0
-	andiw	#0x8000,%d0
-	bne	sub_diff
-|
-| The signs are alike.
-|
-	cmpb	#0x0f,DNRM_FLG(%a6) |is dest the denorm?
-	bnes	sub_u_srcd
-	movew	FPTEMP_EX(%a6),%d0
-	andiw	#0x8000,%d0
-	orw	#0x3fff,%d0	|force the exponent to +/- 1
-	movew	%d0,FPTEMP_EX(%a6) |in the denorm
-	movel	USER_FPCR(%a6),%d0
-	andil	#0x30,%d0
-	fmovel	%d0,%fpcr		|set up users rmode and X
-	fmovex	FPTEMP(%a6),%fp0
-	fsubx	ETEMP(%a6),%fp0
-	fmovel	%fpsr,%d1
-	orl	%d1,USER_FPSR(%a6) |capture cc's and inex from fadd
-	leal	WBTEMP(%a6),%a0	|point a0 to wbtemp in frame
-	fmovex	%fp0,WBTEMP(%a6)	|write result to memory
-	lsrl	#4,%d0		|put rmode in lower 2 bits
-	movel	USER_FPCR(%a6),%d1
-	andil	#0xc0,%d1
-	lsrl	#6,%d1		|put precision in upper word
-	swap	%d1
-	orl	%d0,%d1		|set up for round call
-	clrl	%d0		|force sticky to zero
-	bclrb	#sign_bit,WBTEMP_EX(%a6)
-	sne	WBTEMP_SGN(%a6)
-	bsrl	round		|round result to users rmode & prec
-	bfclr	WBTEMP_SGN(%a6){#0:#8}	|convert back to IEEE ext format
-	beq	frcfpnr
-	bsetb	#sign_bit,WBTEMP_EX(%a6)
-	bra	frcfpnr
-sub_u_srcd:
-	movew	ETEMP_EX(%a6),%d0
-	andiw	#0x8000,%d0
-	orw	#0x3fff,%d0	|force the exponent to +/- 1
-	movew	%d0,ETEMP_EX(%a6) |in the denorm
-	movel	USER_FPCR(%a6),%d0
-	andil	#0x30,%d0
-	fmovel	%d0,%fpcr		|set up users rmode and X
-	fmovex	FPTEMP(%a6),%fp0
-	fsubx	ETEMP(%a6),%fp0
-	fmovel	%fpsr,%d1
-	orl	%d1,USER_FPSR(%a6) |capture cc's and inex from fadd
-	leal	WBTEMP(%a6),%a0	|point a0 to wbtemp in frame
-	fmovex	%fp0,WBTEMP(%a6)	|write result to memory
-	lsrl	#4,%d0		|put rmode in lower 2 bits
-	movel	USER_FPCR(%a6),%d1
-	andil	#0xc0,%d1
-	lsrl	#6,%d1		|put precision in upper word
-	swap	%d1
-	orl	%d0,%d1		|set up for round call
-	clrl	%d0		|force sticky to zero
-	bclrb	#sign_bit,WBTEMP_EX(%a6)
-	sne	WBTEMP_SGN(%a6)
-	bsrl	round		|round result to users rmode & prec
-	bfclr	WBTEMP_SGN(%a6){#0:#8}	|convert back to IEEE ext format
-	beq	frcfpnr
-	bsetb	#sign_bit,WBTEMP_EX(%a6)
-	bra	frcfpnr
-|
-| Signs are unlike:
-|
-sub_diff:
-	cmpb	#0x0f,DNRM_FLG(%a6) |is dest the denorm?
-	bnes	sub_s_srcd
-sub_s_destd:
-	leal	ETEMP(%a6),%a0
-	movel	USER_FPCR(%a6),%d0
-	andil	#0x30,%d0
-	lsrl	#4,%d0		|put rmode in lower 2 bits
-	movel	USER_FPCR(%a6),%d1
-	andil	#0xc0,%d1
-	lsrl	#6,%d1		|put precision in upper word
-	swap	%d1
-	orl	%d0,%d1		|set up for round call
-	movel	#0x20000000,%d0	|set sticky for round
-|
-| Since the dest is the denorm, the sign is the opposite of the
-| norm sign.
-|
-	eoriw	#0x8000,ETEMP_EX(%a6)	|flip sign on result
-	tstw	ETEMP_EX(%a6)
-	bgts	sub_s_dwr
-	orl	#neg_mask,USER_FPSR(%a6)
-sub_s_dwr:
-	bclrb	#sign_bit,ETEMP_EX(%a6)
-	sne	ETEMP_SGN(%a6)
-	bsrl	round		|round result to users rmode & prec
-	bfclr	ETEMP_SGN(%a6){#0:#8}	|convert back to IEEE ext format
-	beqs	sub_s_dclr
-	bsetb	#sign_bit,ETEMP_EX(%a6)
-sub_s_dclr:
-	leal	WBTEMP(%a6),%a0
-	movel	ETEMP(%a6),(%a0)	|write result to wbtemp
-	movel	ETEMP_HI(%a6),4(%a0)
-	movel	ETEMP_LO(%a6),8(%a0)
-	bra	sub_ckovf
-sub_s_srcd:
-	leal	FPTEMP(%a6),%a0
-	movel	USER_FPCR(%a6),%d0
-	andil	#0x30,%d0
-	lsrl	#4,%d0		|put rmode in lower 2 bits
-	movel	USER_FPCR(%a6),%d1
-	andil	#0xc0,%d1
-	lsrl	#6,%d1		|put precision in upper word
-	swap	%d1
-	orl	%d0,%d1		|set up for round call
-	movel	#0x20000000,%d0	|set sticky for round
-	bclrb	#sign_bit,FPTEMP_EX(%a6)
-	sne	FPTEMP_SGN(%a6)
-	bsrl	round		|round result to users rmode & prec
-	bfclr	FPTEMP_SGN(%a6){#0:#8}	|convert back to IEEE ext format
-	beqs	sub_s_sclr
-	bsetb	#sign_bit,FPTEMP_EX(%a6)
-sub_s_sclr:
-	leal	WBTEMP(%a6),%a0
-	movel	FPTEMP(%a6),(%a0)	|write result to wbtemp
-	movel	FPTEMP_HI(%a6),4(%a0)
-	movel	FPTEMP_LO(%a6),8(%a0)
-	tstw	FPTEMP_EX(%a6)
-	bgt	sub_ckovf
-	orl	#neg_mask,USER_FPSR(%a6)
-sub_ckovf:
-	movew	WBTEMP_EX(%a6),%d0
-	andiw	#0x7fff,%d0
-	cmpiw	#0x7fff,%d0
-	bne	frcfpnr
-|
-| The result has overflowed to $7fff exponent.  Set I, ovfl,
-| and aovfl, and clr the mantissa (incorrectly set by the
-| round routine.)
-|
-	orl	#inf_mask+ovfl_inx_mask,USER_FPSR(%a6)
-	clrl	4(%a0)
-	bra	frcfpnr
-|
-| Inst is fcmp.
-|
-wrap_cmp:
-	cmpb	#0xff,DNRM_FLG(%a6) |if both ops denorm,
-	beq	fix_stk		 |restore to fpu
-|
-| One of the ops is denormalized.  Test for wrap condition
-| and complete the instruction.
-|
-	cmpb	#0x0f,DNRM_FLG(%a6) |check for dest denorm
-	bnes	cmp_srcd
-cmp_destd:
-	bsrl	ckinf_ns
-	bne	fix_stk
-	bfextu	ETEMP_EX(%a6){#1:#15},%d0	|get src exp (always pos)
-	bfexts	FPTEMP_EX(%a6){#1:#15},%d1	|get dest exp (always neg)
-	subl	%d1,%d0			|subtract dest from src
-	cmpl	#0x8000,%d0
-	blt	fix_stk			|if less, not wrap case
-	tstw	ETEMP_EX(%a6)		|set N to ~sign_of(src)
-	bge	cmp_setn
-	rts
-cmp_srcd:
-	bsrl	ckinf_nd
-	bne	fix_stk
-	bfextu	FPTEMP_EX(%a6){#1:#15},%d0	|get dest exp (always pos)
-	bfexts	ETEMP_EX(%a6){#1:#15},%d1	|get src exp (always neg)
-	subl	%d1,%d0			|subtract src from dest
-	cmpl	#0x8000,%d0
-	blt	fix_stk			|if less, not wrap case
-	tstw	FPTEMP_EX(%a6)		|set N to sign_of(dest)
-	blt	cmp_setn
-	rts
-cmp_setn:
-	orl	#neg_mask,USER_FPSR(%a6)
-	rts
-
-|
-| Inst is fmul.
-|
-wrap_mul:
-	cmpb	#0xff,DNRM_FLG(%a6) |if both ops denorm,
-	beq	force_unf	|force an underflow (really!)
-|
-| One of the ops is denormalized.  Test for wrap condition
-| and complete the instruction.
-|
-	cmpb	#0x0f,DNRM_FLG(%a6) |check for dest denorm
-	bnes	mul_srcd
-mul_destd:
-	bsrl	ckinf_ns
-	bne	fix_stk
-	bfextu	ETEMP_EX(%a6){#1:#15},%d0	|get src exp (always pos)
-	bfexts	FPTEMP_EX(%a6){#1:#15},%d1	|get dest exp (always neg)
-	addl	%d1,%d0			|subtract dest from src
-	bgt	fix_stk
-	bra	force_unf
-mul_srcd:
-	bsrl	ckinf_nd
-	bne	fix_stk
-	bfextu	FPTEMP_EX(%a6){#1:#15},%d0	|get dest exp (always pos)
-	bfexts	ETEMP_EX(%a6){#1:#15},%d1	|get src exp (always neg)
-	addl	%d1,%d0			|subtract src from dest
-	bgt	fix_stk
-
-|
-| This code handles the case of the instruction resulting in
-| an underflow condition.
-|
-force_unf:
-	bclrb	#E1,E_BYTE(%a6)
-	orl	#unfinx_mask,USER_FPSR(%a6)
-	clrw	NMNEXC(%a6)
-	clrb	WBTEMP_SGN(%a6)
-	movew	ETEMP_EX(%a6),%d0		|find the sign of the result
-	movew	FPTEMP_EX(%a6),%d1
-	eorw	%d1,%d0
-	andiw	#0x8000,%d0
-	beqs	frcunfcont
-	st	WBTEMP_SGN(%a6)
-frcunfcont:
-	lea	WBTEMP(%a6),%a0		|point a0 to memory location
-	movew	CMDREG1B(%a6),%d0
-	btstl	#6,%d0			|test for forced precision
-	beqs	frcunf_fpcr
-	btstl	#2,%d0			|check for double
-	bnes	frcunf_dbl
-	movel	#0x1,%d0			|inst is forced single
-	bras	frcunf_rnd
-frcunf_dbl:
-	movel	#0x2,%d0			|inst is forced double
-	bras	frcunf_rnd
-frcunf_fpcr:
-	bfextu	FPCR_MODE(%a6){#0:#2},%d0	|inst not forced - use fpcr prec
-frcunf_rnd:
-	bsrl	unf_sub			|get correct result based on
-|					;round precision/mode.  This
-|					;sets FPSR_CC correctly
-	bfclr	WBTEMP_SGN(%a6){#0:#8}	|convert back to IEEE ext format
-	beqs	frcfpn
-	bsetb	#sign_bit,WBTEMP_EX(%a6)
-	bra	frcfpn
-
-|
-| Write the result to the user's fpn.  All results must be HUGE to be
-| written; otherwise the results would have overflowed or underflowed.
-| If the rounding precision is single or double, the ovf_res routine
-| is needed to correctly supply the max value.
-|
-frcfpnr:
-	movew	CMDREG1B(%a6),%d0
-	btstl	#6,%d0			|test for forced precision
-	beqs	frcfpn_fpcr
-	btstl	#2,%d0			|check for double
-	bnes	frcfpn_dbl
-	movel	#0x1,%d0			|inst is forced single
-	bras	frcfpn_rnd
-frcfpn_dbl:
-	movel	#0x2,%d0			|inst is forced double
-	bras	frcfpn_rnd
-frcfpn_fpcr:
-	bfextu	FPCR_MODE(%a6){#0:#2},%d0	|inst not forced - use fpcr prec
-	tstb	%d0
-	beqs	frcfpn			|if extended, write what you got
-frcfpn_rnd:
-	bclrb	#sign_bit,WBTEMP_EX(%a6)
-	sne	WBTEMP_SGN(%a6)
-	bsrl	ovf_res			|get correct result based on
-|					;round precision/mode.  This
-|					;sets FPSR_CC correctly
-	bfclr	WBTEMP_SGN(%a6){#0:#8}	|convert back to IEEE ext format
-	beqs	frcfpn_clr
-	bsetb	#sign_bit,WBTEMP_EX(%a6)
-frcfpn_clr:
-	orl	#ovfinx_mask,USER_FPSR(%a6)
-|
-| Perform the write.
-|
-frcfpn:
-	bfextu	CMDREG1B(%a6){#6:#3},%d0	|extract fp destination register
-	cmpib	#3,%d0
-	bles	frc0123			|check if dest is fp0-fp3
-	movel	#7,%d1
-	subl	%d0,%d1
-	clrl	%d0
-	bsetl	%d1,%d0
-	fmovemx WBTEMP(%a6),%d0
-	rts
-frc0123:
-	cmpib	#0,%d0
-	beqs	frc0_dst
-	cmpib	#1,%d0
-	beqs	frc1_dst
-	cmpib	#2,%d0
-	beqs	frc2_dst
-frc3_dst:
-	movel	WBTEMP_EX(%a6),USER_FP3(%a6)
-	movel	WBTEMP_HI(%a6),USER_FP3+4(%a6)
-	movel	WBTEMP_LO(%a6),USER_FP3+8(%a6)
-	rts
-frc2_dst:
-	movel	WBTEMP_EX(%a6),USER_FP2(%a6)
-	movel	WBTEMP_HI(%a6),USER_FP2+4(%a6)
-	movel	WBTEMP_LO(%a6),USER_FP2+8(%a6)
-	rts
-frc1_dst:
-	movel	WBTEMP_EX(%a6),USER_FP1(%a6)
-	movel	WBTEMP_HI(%a6),USER_FP1+4(%a6)
-	movel	WBTEMP_LO(%a6),USER_FP1+8(%a6)
-	rts
-frc0_dst:
-	movel	WBTEMP_EX(%a6),USER_FP0(%a6)
-	movel	WBTEMP_HI(%a6),USER_FP0+4(%a6)
-	movel	WBTEMP_LO(%a6),USER_FP0+8(%a6)
-	rts
-
-|
-| Write etemp to fpn.
-| A check is made on enabled and signalled snan exceptions,
-| and the destination is not overwritten if this condition exists.
-| This code is designed to make fmoveins of unsupported data types
-| faster.
-|
-wr_etemp:
-	btstb	#snan_bit,FPSR_EXCEPT(%a6)	|if snan is set, and
-	beqs	fmoveinc		|enabled, force restore
-	btstb	#snan_bit,FPCR_ENABLE(%a6) |and don't overwrite
-	beqs	fmoveinc		|the dest
-	movel	ETEMP_EX(%a6),FPTEMP_EX(%a6)	|set up fptemp sign for
-|						;snan handler
-	tstb	ETEMP(%a6)		|check for negative
-	blts	snan_neg
-	rts
-snan_neg:
-	orl	#neg_bit,USER_FPSR(%a6)	|snan is negative; set N
-	rts
-fmoveinc:
-	clrw	NMNEXC(%a6)
-	bclrb	#E1,E_BYTE(%a6)
-	moveb	STAG(%a6),%d0		|check if stag is inf
-	andib	#0xe0,%d0
-	cmpib	#0x40,%d0
-	bnes	fminc_cnan
-	orl	#inf_mask,USER_FPSR(%a6) |if inf, nothing yet has set I
-	tstw	LOCAL_EX(%a0)		|check sign
-	bges	fminc_con
-	orl	#neg_mask,USER_FPSR(%a6)
-	bra	fminc_con
-fminc_cnan:
-	cmpib	#0x60,%d0			|check if stag is NaN
-	bnes	fminc_czero
-	orl	#nan_mask,USER_FPSR(%a6) |if nan, nothing yet has set NaN
-	movel	ETEMP_EX(%a6),FPTEMP_EX(%a6)	|set up fptemp sign for
-|						;snan handler
-	tstw	LOCAL_EX(%a0)		|check sign
-	bges	fminc_con
-	orl	#neg_mask,USER_FPSR(%a6)
-	bra	fminc_con
-fminc_czero:
-	cmpib	#0x20,%d0			|check if zero
-	bnes	fminc_con
-	orl	#z_mask,USER_FPSR(%a6)	|if zero, set Z
-	tstw	LOCAL_EX(%a0)		|check sign
-	bges	fminc_con
-	orl	#neg_mask,USER_FPSR(%a6)
-fminc_con:
-	bfextu	CMDREG1B(%a6){#6:#3},%d0	|extract fp destination register
-	cmpib	#3,%d0
-	bles	fp0123			|check if dest is fp0-fp3
-	movel	#7,%d1
-	subl	%d0,%d1
-	clrl	%d0
-	bsetl	%d1,%d0
-	fmovemx ETEMP(%a6),%d0
-	rts
-
-fp0123:
-	cmpib	#0,%d0
-	beqs	fp0_dst
-	cmpib	#1,%d0
-	beqs	fp1_dst
-	cmpib	#2,%d0
-	beqs	fp2_dst
-fp3_dst:
-	movel	ETEMP_EX(%a6),USER_FP3(%a6)
-	movel	ETEMP_HI(%a6),USER_FP3+4(%a6)
-	movel	ETEMP_LO(%a6),USER_FP3+8(%a6)
-	rts
-fp2_dst:
-	movel	ETEMP_EX(%a6),USER_FP2(%a6)
-	movel	ETEMP_HI(%a6),USER_FP2+4(%a6)
-	movel	ETEMP_LO(%a6),USER_FP2+8(%a6)
-	rts
-fp1_dst:
-	movel	ETEMP_EX(%a6),USER_FP1(%a6)
-	movel	ETEMP_HI(%a6),USER_FP1+4(%a6)
-	movel	ETEMP_LO(%a6),USER_FP1+8(%a6)
-	rts
-fp0_dst:
-	movel	ETEMP_EX(%a6),USER_FP0(%a6)
-	movel	ETEMP_HI(%a6),USER_FP0+4(%a6)
-	movel	ETEMP_LO(%a6),USER_FP0+8(%a6)
-	rts
-
-opclass3:
-	st	CU_ONLY(%a6)
-	movew	CMDREG1B(%a6),%d0	|check if packed moveout
-	andiw	#0x0c00,%d0	|isolate last 2 bits of size field
-	cmpiw	#0x0c00,%d0	|if size is 011 or 111, it is packed
-	beq	pack_out	|else it is norm or denorm
-	bra	mv_out
-
-
-|
-|	MOVE OUT
-|
-
-mv_tbl:
-	.long	li
-	.long	sgp
-	.long	xp
-	.long	mvout_end	|should never be taken
-	.long	wi
-	.long	dp
-	.long	bi
-	.long	mvout_end	|should never be taken
-mv_out:
-	bfextu	CMDREG1B(%a6){#3:#3},%d1	|put source specifier in d1
-	leal	mv_tbl,%a0
-	movel	%a0@(%d1:l:4),%a0
-	jmp	(%a0)
-
-|
-| This exit is for move-out to memory.  The aunfl bit is
-| set if the result is inex and unfl is signalled.
-|
-mvout_end:
-	btstb	#inex2_bit,FPSR_EXCEPT(%a6)
-	beqs	no_aufl
-	btstb	#unfl_bit,FPSR_EXCEPT(%a6)
-	beqs	no_aufl
-	bsetb	#aunfl_bit,FPSR_AEXCEPT(%a6)
-no_aufl:
-	clrw	NMNEXC(%a6)
-	bclrb	#E1,E_BYTE(%a6)
-	fmovel	#0,%FPSR			|clear any cc bits from res_func
-|
-| Return ETEMP to extended format from internal extended format so
-| that gen_except will have a correctly signed value for ovfl/unfl
-| handlers.
-|
-	bfclr	ETEMP_SGN(%a6){#0:#8}
-	beqs	mvout_con
-	bsetb	#sign_bit,ETEMP_EX(%a6)
-mvout_con:
-	rts
-|
-| This exit is for move-out to int register.  The aunfl bit is
-| not set in any case for this move.
-|
-mvouti_end:
-	clrw	NMNEXC(%a6)
-	bclrb	#E1,E_BYTE(%a6)
-	fmovel	#0,%FPSR			|clear any cc bits from res_func
-|
-| Return ETEMP to extended format from internal extended format so
-| that gen_except will have a correctly signed value for ovfl/unfl
-| handlers.
-|
-	bfclr	ETEMP_SGN(%a6){#0:#8}
-	beqs	mvouti_con
-	bsetb	#sign_bit,ETEMP_EX(%a6)
-mvouti_con:
-	rts
-|
-| li is used to handle a long integer source specifier
-|
-
-li:
-	moveql	#4,%d0		|set byte count
-
-	btstb	#7,STAG(%a6)	|check for extended denorm
-	bne	int_dnrm	|if so, branch
-
-	fmovemx ETEMP(%a6),%fp0-%fp0
-	fcmpd	#0x41dfffffffc00000,%fp0
-| 41dfffffffc00000 in dbl prec = 401d0000fffffffe00000000 in ext prec
-	fbge	lo_plrg
-	fcmpd	#0xc1e0000000000000,%fp0
-| c1e0000000000000 in dbl prec = c01e00008000000000000000 in ext prec
-	fble	lo_nlrg
-|
-| at this point, the answer is between the largest pos and neg values
-|
-	movel	USER_FPCR(%a6),%d1	|use user's rounding mode
-	andil	#0x30,%d1
-	fmovel	%d1,%fpcr
-	fmovel	%fp0,L_SCR1(%a6)	|let the 040 perform conversion
-	fmovel %fpsr,%d1
-	orl	%d1,USER_FPSR(%a6)	|capture inex2/ainex if set
-	bra	int_wrt
-
-
-lo_plrg:
-	movel	#0x7fffffff,L_SCR1(%a6)	|answer is largest positive int
-	fbeq	int_wrt			|exact answer
-	fcmpd	#0x41dfffffffe00000,%fp0
-| 41dfffffffe00000 in dbl prec = 401d0000ffffffff00000000 in ext prec
-	fbge	int_operr		|set operr
-	bra	int_inx			|set inexact
-
-lo_nlrg:
-	movel	#0x80000000,L_SCR1(%a6)
-	fbeq	int_wrt			|exact answer
-	fcmpd	#0xc1e0000000100000,%fp0
-| c1e0000000100000 in dbl prec = c01e00008000000080000000 in ext prec
-	fblt	int_operr		|set operr
-	bra	int_inx			|set inexact
-
-|
-| wi is used to handle a word integer source specifier
-|
-
-wi:
-	moveql	#2,%d0		|set byte count
-
-	btstb	#7,STAG(%a6)	|check for extended denorm
-	bne	int_dnrm	|branch if so
-
-	fmovemx ETEMP(%a6),%fp0-%fp0
-	fcmps	#0x46fffe00,%fp0
-| 46fffe00 in sgl prec = 400d0000fffe000000000000 in ext prec
-	fbge	wo_plrg
-	fcmps	#0xc7000000,%fp0
-| c7000000 in sgl prec = c00e00008000000000000000 in ext prec
-	fble	wo_nlrg
-
-|
-| at this point, the answer is between the largest pos and neg values
-|
-	movel	USER_FPCR(%a6),%d1	|use user's rounding mode
-	andil	#0x30,%d1
-	fmovel	%d1,%fpcr
-	fmovew	%fp0,L_SCR1(%a6)	|let the 040 perform conversion
-	fmovel %fpsr,%d1
-	orl	%d1,USER_FPSR(%a6)	|capture inex2/ainex if set
-	bra	int_wrt
-
-wo_plrg:
-	movew	#0x7fff,L_SCR1(%a6)	|answer is largest positive int
-	fbeq	int_wrt			|exact answer
-	fcmps	#0x46ffff00,%fp0
-| 46ffff00 in sgl prec = 400d0000ffff000000000000 in ext prec
-	fbge	int_operr		|set operr
-	bra	int_inx			|set inexact
-
-wo_nlrg:
-	movew	#0x8000,L_SCR1(%a6)
-	fbeq	int_wrt			|exact answer
-	fcmps	#0xc7000080,%fp0
-| c7000080 in sgl prec = c00e00008000800000000000 in ext prec
-	fblt	int_operr		|set operr
-	bra	int_inx			|set inexact
-
-|
-| bi is used to handle a byte integer source specifier
-|
-
-bi:
-	moveql	#1,%d0		|set byte count
-
-	btstb	#7,STAG(%a6)	|check for extended denorm
-	bne	int_dnrm	|branch if so
-
-	fmovemx ETEMP(%a6),%fp0-%fp0
-	fcmps	#0x42fe0000,%fp0
-| 42fe0000 in sgl prec = 40050000fe00000000000000 in ext prec
-	fbge	by_plrg
-	fcmps	#0xc3000000,%fp0
-| c3000000 in sgl prec = c00600008000000000000000 in ext prec
-	fble	by_nlrg
-
-|
-| at this point, the answer is between the largest pos and neg values
-|
-	movel	USER_FPCR(%a6),%d1	|use user's rounding mode
-	andil	#0x30,%d1
-	fmovel	%d1,%fpcr
-	fmoveb	%fp0,L_SCR1(%a6)	|let the 040 perform conversion
-	fmovel %fpsr,%d1
-	orl	%d1,USER_FPSR(%a6)	|capture inex2/ainex if set
-	bra	int_wrt
-
-by_plrg:
-	moveb	#0x7f,L_SCR1(%a6)		|answer is largest positive int
-	fbeq	int_wrt			|exact answer
-	fcmps	#0x42ff0000,%fp0
-| 42ff0000 in sgl prec = 40050000ff00000000000000 in ext prec
-	fbge	int_operr		|set operr
-	bra	int_inx			|set inexact
-
-by_nlrg:
-	moveb	#0x80,L_SCR1(%a6)
-	fbeq	int_wrt			|exact answer
-	fcmps	#0xc3008000,%fp0
-| c3008000 in sgl prec = c00600008080000000000000 in ext prec
-	fblt	int_operr		|set operr
-	bra	int_inx			|set inexact
-
-|
-| Common integer routines
-|
-| int_drnrm---account for possible nonzero result for round up with positive
-| operand and round down for negative answer.  In the first case (result = 1)
-| byte-width (store in d0) of result must be honored.  In the second case,
-| -1 in L_SCR1(a6) will cover all contingencies (FMOVE.B/W/L out).
-
-int_dnrm:
-	movel	#0,L_SCR1(%a6)	| initialize result to 0
-	bfextu	FPCR_MODE(%a6){#2:#2},%d1	| d1 is the rounding mode
-	cmpb	#2,%d1
-	bmis	int_inx		| if RN or RZ, done
-	bnes	int_rp		| if RP, continue below
-	tstw	ETEMP(%a6)	| RM: store -1 in L_SCR1 if src is negative
-	bpls	int_inx		| otherwise result is 0
-	movel	#-1,L_SCR1(%a6)
-	bras	int_inx
-int_rp:
-	tstw	ETEMP(%a6)	| RP: store +1 of proper width in L_SCR1 if
-|				; source is greater than 0
-	bmis	int_inx		| otherwise, result is 0
-	lea	L_SCR1(%a6),%a1	| a1 is address of L_SCR1
-	addal	%d0,%a1		| offset by destination width -1
-	subal	#1,%a1
-	bsetb	#0,(%a1)		| set low bit at a1 address
-int_inx:
-	oril	#inx2a_mask,USER_FPSR(%a6)
-	bras	int_wrt
-int_operr:
-	fmovemx %fp0-%fp0,FPTEMP(%a6)	|FPTEMP must contain the extended
-|				;precision source that needs to be
-|				;converted to integer this is required
-|				;if the operr exception is enabled.
-|				;set operr/aiop (no inex2 on int ovfl)
-
-	oril	#opaop_mask,USER_FPSR(%a6)
-|				;fall through to perform int_wrt
-int_wrt:
-	movel	EXC_EA(%a6),%a1	|load destination address
-	tstl	%a1		|check to see if it is a dest register
-	beqs	wrt_dn		|write data register
-	lea	L_SCR1(%a6),%a0	|point to supervisor source address
-	bsrl	mem_write
-	bra	mvouti_end
-
-wrt_dn:
-	movel	%d0,-(%sp)	|d0 currently contains the size to write
-	bsrl	get_fline	|get_fline returns Dn in d0
-	andiw	#0x7,%d0		|isolate register
-	movel	(%sp)+,%d1	|get size
-	cmpil	#4,%d1		|most frequent case
-	beqs	sz_long
-	cmpil	#2,%d1
-	bnes	sz_con
-	orl	#8,%d0		|add 'word' size to register#
-	bras	sz_con
-sz_long:
-	orl	#0x10,%d0		|add 'long' size to register#
-sz_con:
-	movel	%d0,%d1		|reg_dest expects size:reg in d1
-	bsrl	reg_dest	|load proper data register
-	bra	mvouti_end
-xp:
-	lea	ETEMP(%a6),%a0
-	bclrb	#sign_bit,LOCAL_EX(%a0)
-	sne	LOCAL_SGN(%a0)
-	btstb	#7,STAG(%a6)	|check for extended denorm
-	bne	xdnrm
-	clrl	%d0
-	bras	do_fp		|do normal case
-sgp:
-	lea	ETEMP(%a6),%a0
-	bclrb	#sign_bit,LOCAL_EX(%a0)
-	sne	LOCAL_SGN(%a0)
-	btstb	#7,STAG(%a6)	|check for extended denorm
-	bne	sp_catas	|branch if so
-	movew	LOCAL_EX(%a0),%d0
-	lea	sp_bnds,%a1
-	cmpw	(%a1),%d0
-	blt	sp_under
-	cmpw	2(%a1),%d0
-	bgt	sp_over
-	movel	#1,%d0		|set destination format to single
-	bras	do_fp		|do normal case
-dp:
-	lea	ETEMP(%a6),%a0
-	bclrb	#sign_bit,LOCAL_EX(%a0)
-	sne	LOCAL_SGN(%a0)
-
-	btstb	#7,STAG(%a6)	|check for extended denorm
-	bne	dp_catas	|branch if so
-
-	movew	LOCAL_EX(%a0),%d0
-	lea	dp_bnds,%a1
-
-	cmpw	(%a1),%d0
-	blt	dp_under
-	cmpw	2(%a1),%d0
-	bgt	dp_over
-
-	movel	#2,%d0		|set destination format to double
-|				;fall through to do_fp
-|
-do_fp:
-	bfextu	FPCR_MODE(%a6){#2:#2},%d1	|rnd mode in d1
-	swap	%d0			|rnd prec in upper word
-	addl	%d0,%d1			|d1 has PREC/MODE info
-
-	clrl	%d0			|clear g,r,s
-
-	bsrl	round			|round
-
-	movel	%a0,%a1
-	movel	EXC_EA(%a6),%a0
-
-	bfextu	CMDREG1B(%a6){#3:#3},%d1	|extract destination format
-|					;at this point only the dest
-|					;formats sgl, dbl, ext are
-|					;possible
-	cmpb	#2,%d1
-	bgts	ddbl			|double=5, extended=2, single=1
-	bnes	dsgl
-|					;fall through to dext
-dext:
-	bsrl	dest_ext
-	bra	mvout_end
-dsgl:
-	bsrl	dest_sgl
-	bra	mvout_end
-ddbl:
-	bsrl	dest_dbl
-	bra	mvout_end
-
-|
-| Handle possible denorm or catastrophic underflow cases here
-|
-xdnrm:
-	bsr	set_xop		|initialize WBTEMP
-	bsetb	#wbtemp15_bit,WB_BYTE(%a6) |set wbtemp15
-
-	movel	%a0,%a1
-	movel	EXC_EA(%a6),%a0	|a0 has the destination pointer
-	bsrl	dest_ext	|store to memory
-	bsetb	#unfl_bit,FPSR_EXCEPT(%a6)
-	bra	mvout_end
-
-sp_under:
-	bsetb	#etemp15_bit,STAG(%a6)
-
-	cmpw	4(%a1),%d0
-	blts	sp_catas	|catastrophic underflow case
-
-	movel	#1,%d0		|load in round precision
-	movel	#sgl_thresh,%d1	|load in single denorm threshold
-	bsrl	dpspdnrm	|expects d1 to have the proper
-|				;denorm threshold
-	bsrl	dest_sgl	|stores value to destination
-	bsetb	#unfl_bit,FPSR_EXCEPT(%a6)
-	bra	mvout_end	|exit
-
-dp_under:
-	bsetb	#etemp15_bit,STAG(%a6)
-
-	cmpw	4(%a1),%d0
-	blts	dp_catas	|catastrophic underflow case
-
-	movel	#dbl_thresh,%d1	|load in double precision threshold
-	movel	#2,%d0
-	bsrl	dpspdnrm	|expects d1 to have proper
-|				;denorm threshold
-|				;expects d0 to have round precision
-	bsrl	dest_dbl	|store value to destination
-	bsetb	#unfl_bit,FPSR_EXCEPT(%a6)
-	bra	mvout_end	|exit
-
-|
-| Handle catastrophic underflow cases here
-|
-sp_catas:
-| Temp fix for z bit set in unf_sub
-	movel	USER_FPSR(%a6),-(%a7)
-
-	movel	#1,%d0		|set round precision to sgl
-
-	bsrl	unf_sub		|a0 points to result
-
-	movel	(%a7)+,USER_FPSR(%a6)
-
-	movel	#1,%d0
-	subw	%d0,LOCAL_EX(%a0) |account for difference between
-|				;denorm/norm bias
-
-	movel	%a0,%a1		|a1 has the operand input
-	movel	EXC_EA(%a6),%a0	|a0 has the destination pointer
-
-	bsrl	dest_sgl	|store the result
-	oril	#unfinx_mask,USER_FPSR(%a6)
-	bra	mvout_end
-
-dp_catas:
-| Temp fix for z bit set in unf_sub
-	movel	USER_FPSR(%a6),-(%a7)
-
-	movel	#2,%d0		|set round precision to dbl
-	bsrl	unf_sub		|a0 points to result
-
-	movel	(%a7)+,USER_FPSR(%a6)
-
-	movel	#1,%d0
-	subw	%d0,LOCAL_EX(%a0) |account for difference between
-|				;denorm/norm bias
-
-	movel	%a0,%a1		|a1 has the operand input
-	movel	EXC_EA(%a6),%a0	|a0 has the destination pointer
-
-	bsrl	dest_dbl	|store the result
-	oril	#unfinx_mask,USER_FPSR(%a6)
-	bra	mvout_end
-
-|
-| Handle catastrophic overflow cases here
-|
-sp_over:
-| Temp fix for z bit set in unf_sub
-	movel	USER_FPSR(%a6),-(%a7)
-
-	movel	#1,%d0
-	leal	FP_SCR1(%a6),%a0	|use FP_SCR1 for creating result
-	movel	ETEMP_EX(%a6),(%a0)
-	movel	ETEMP_HI(%a6),4(%a0)
-	movel	ETEMP_LO(%a6),8(%a0)
-	bsrl	ovf_res
-
-	movel	(%a7)+,USER_FPSR(%a6)
-
-	movel	%a0,%a1
-	movel	EXC_EA(%a6),%a0
-	bsrl	dest_sgl
-	orl	#ovfinx_mask,USER_FPSR(%a6)
-	bra	mvout_end
-
-dp_over:
-| Temp fix for z bit set in ovf_res
-	movel	USER_FPSR(%a6),-(%a7)
-
-	movel	#2,%d0
-	leal	FP_SCR1(%a6),%a0	|use FP_SCR1 for creating result
-	movel	ETEMP_EX(%a6),(%a0)
-	movel	ETEMP_HI(%a6),4(%a0)
-	movel	ETEMP_LO(%a6),8(%a0)
-	bsrl	ovf_res
-
-	movel	(%a7)+,USER_FPSR(%a6)
-
-	movel	%a0,%a1
-	movel	EXC_EA(%a6),%a0
-	bsrl	dest_dbl
-	orl	#ovfinx_mask,USER_FPSR(%a6)
-	bra	mvout_end
-
-|
-|	DPSPDNRM
-|
-| This subroutine takes an extended normalized number and denormalizes
-| it to the given round precision. This subroutine also decrements
-| the input operand's exponent by 1 to account for the fact that
-| dest_sgl or dest_dbl expects a normalized number's bias.
-|
-| Input: a0  points to a normalized number in internal extended format
-|	 d0  is the round precision (=1 for sgl; =2 for dbl)
-|	 d1  is the single precision or double precision
-|	     denorm threshold
-|
-| Output: (In the format for dest_sgl or dest_dbl)
-|	 a0   points to the destination
-|	 a1   points to the operand
-|
-| Exceptions: Reports inexact 2 exception by setting USER_FPSR bits
-|
-dpspdnrm:
-	movel	%d0,-(%a7)	|save round precision
-	clrl	%d0		|clear initial g,r,s
-	bsrl	dnrm_lp		|careful with d0, it's needed by round
-
-	bfextu	FPCR_MODE(%a6){#2:#2},%d1 |get rounding mode
-	swap	%d1
-	movew	2(%a7),%d1	|set rounding precision
-	swap	%d1		|at this point d1 has PREC/MODE info
-	bsrl	round		|round result, sets the inex bit in
-|				;USER_FPSR if needed
-
-	movew	#1,%d0
-	subw	%d0,LOCAL_EX(%a0) |account for difference in denorm
-|				;vs norm bias
-
-	movel	%a0,%a1		|a1 has the operand input
-	movel	EXC_EA(%a6),%a0	|a0 has the destination pointer
-	addw	#4,%a7		|pop stack
-	rts
-|
-| SET_XOP initialized WBTEMP with the value pointed to by a0
-| input: a0 points to input operand in the internal extended format
-|
-set_xop:
-	movel	LOCAL_EX(%a0),WBTEMP_EX(%a6)
-	movel	LOCAL_HI(%a0),WBTEMP_HI(%a6)
-	movel	LOCAL_LO(%a0),WBTEMP_LO(%a6)
-	bfclr	WBTEMP_SGN(%a6){#0:#8}
-	beqs	sxop
-	bsetb	#sign_bit,WBTEMP_EX(%a6)
-sxop:
-	bfclr	STAG(%a6){#5:#4}	|clear wbtm66,wbtm1,wbtm0,sbit
-	rts
-|
-|	P_MOVE
-|
-p_movet:
-	.long	p_move
-	.long	p_movez
-	.long	p_movei
-	.long	p_moven
-	.long	p_move
-p_regd:
-	.long	p_dyd0
-	.long	p_dyd1
-	.long	p_dyd2
-	.long	p_dyd3
-	.long	p_dyd4
-	.long	p_dyd5
-	.long	p_dyd6
-	.long	p_dyd7
-
-pack_out:
-	leal	p_movet,%a0	|load jmp table address
-	movew	STAG(%a6),%d0	|get source tag
-	bfextu	%d0{#16:#3},%d0	|isolate source bits
-	movel	(%a0,%d0.w*4),%a0	|load a0 with routine label for tag
-	jmp	(%a0)		|go to the routine
-
-p_write:
-	movel	#0x0c,%d0	|get byte count
-	movel	EXC_EA(%a6),%a1	|get the destination address
-	bsr	mem_write	|write the user's destination
-	moveb	#0,CU_SAVEPC(%a6) |set the cu save pc to all 0's
-
-|
-| Also note that the dtag must be set to norm here - this is because
-| the 040 uses the dtag to execute the correct microcode.
-|
-        bfclr    DTAG(%a6){#0:#3}  |set dtag to norm
-
-	rts
-
-| Notes on handling of special case (zero, inf, and nan) inputs:
-|	1. Operr is not signalled if the k-factor is greater than 18.
-|	2. Per the manual, status bits are not set.
-|
-
-p_move:
-	movew	CMDREG1B(%a6),%d0
-	btstl	#kfact_bit,%d0	|test for dynamic k-factor
-	beqs	statick		|if clear, k-factor is static
-dynamick:
-	bfextu	%d0{#25:#3},%d0	|isolate register for dynamic k-factor
-	lea	p_regd,%a0
-	movel	%a0@(%d0:l:4),%a0
-	jmp	(%a0)
-statick:
-	andiw	#0x007f,%d0	|get k-factor
-	bfexts	%d0{#25:#7},%d0	|sign extend d0 for bindec
-	leal	ETEMP(%a6),%a0	|a0 will point to the packed decimal
-	bsrl	bindec		|perform the convert; data at a6
-	leal	FP_SCR1(%a6),%a0	|load a0 with result address
-	bral	p_write
-p_movez:
-	leal	ETEMP(%a6),%a0	|a0 will point to the packed decimal
-	clrw	2(%a0)		|clear lower word of exp
-	clrl	4(%a0)		|load second lword of ZERO
-	clrl	8(%a0)		|load third lword of ZERO
-	bra	p_write		|go write results
-p_movei:
-	fmovel	#0,%FPSR		|clear aiop
-	leal	ETEMP(%a6),%a0	|a0 will point to the packed decimal
-	clrw	2(%a0)		|clear lower word of exp
-	bra	p_write		|go write the result
-p_moven:
-	leal	ETEMP(%a6),%a0	|a0 will point to the packed decimal
-	clrw	2(%a0)		|clear lower word of exp
-	bra	p_write		|go write the result
-
-|
-| Routines to read the dynamic k-factor from Dn.
-|
-p_dyd0:
-	movel	USER_D0(%a6),%d0
-	bras	statick
-p_dyd1:
-	movel	USER_D1(%a6),%d0
-	bras	statick
-p_dyd2:
-	movel	%d2,%d0
-	bras	statick
-p_dyd3:
-	movel	%d3,%d0
-	bras	statick
-p_dyd4:
-	movel	%d4,%d0
-	bras	statick
-p_dyd5:
-	movel	%d5,%d0
-	bras	statick
-p_dyd6:
-	movel	%d6,%d0
-	bra	statick
-p_dyd7:
-	movel	%d7,%d0
-	bra	statick
-
-	|end
diff --git a/ANDROID_3.4.5/arch/m68k/fpsp040/round.S b/ANDROID_3.4.5/arch/m68k/fpsp040/round.S
deleted file mode 100644
index f84ae0dd..00000000
--- a/ANDROID_3.4.5/arch/m68k/fpsp040/round.S
+++ /dev/null
@@ -1,648 +0,0 @@
-|
-|	round.sa 3.4 7/29/91
-|
-|	handle rounding and normalization tasks
-|
-|
-|
-|		Copyright (C) Motorola, Inc. 1990
-|			All Rights Reserved
-|
-|       For details on the license for this file, please see the
-|       file, README, in this same directory.
-
-|ROUND	idnt    2,1 | Motorola 040 Floating Point Software Package
-
-	|section	8
-
-#include "fpsp.h"
-
-|
-|	round --- round result according to precision/mode
-|
-|	a0 points to the input operand in the internal extended format
-|	d1(high word) contains rounding precision:
-|		ext = $0000xxxx
-|		sgl = $0001xxxx
-|		dbl = $0002xxxx
-|	d1(low word) contains rounding mode:
-|		RN  = $xxxx0000
-|		RZ  = $xxxx0001
-|		RM  = $xxxx0010
-|		RP  = $xxxx0011
-|	d0{31:29} contains the g,r,s bits (extended)
-|
-|	On return the value pointed to by a0 is correctly rounded,
-|	a0 is preserved and the g-r-s bits in d0 are cleared.
-|	The result is not typed - the tag field is invalid.  The
-|	result is still in the internal extended format.
-|
-|	The INEX bit of USER_FPSR will be set if the rounded result was
-|	inexact (i.e. if any of the g-r-s bits were set).
-|
-
-	.global	round
-round:
-| If g=r=s=0 then result is exact and round is done, else set
-| the inex flag in status reg and continue.
-|
-	bsrs	ext_grs			|this subroutine looks at the
-|					:rounding precision and sets
-|					;the appropriate g-r-s bits.
-	tstl	%d0			|if grs are zero, go force
-	bne	rnd_cont		|lower bits to zero for size
-
-	swap	%d1			|set up d1.w for round prec.
-	bra	truncate
-
-rnd_cont:
-|
-| Use rounding mode as an index into a jump table for these modes.
-|
-	orl	#inx2a_mask,USER_FPSR(%a6) |set inex2/ainex
-	lea	mode_tab,%a1
-	movel	(%a1,%d1.w*4),%a1
-	jmp	(%a1)
-|
-| Jump table indexed by rounding mode in d1.w.  All following assumes
-| grs != 0.
-|
-mode_tab:
-	.long	rnd_near
-	.long	rnd_zero
-	.long	rnd_mnus
-	.long	rnd_plus
-|
-|	ROUND PLUS INFINITY
-|
-|	If sign of fp number = 0 (positive), then add 1 to l.
-|
-rnd_plus:
-	swap	%d1			|set up d1 for round prec.
-	tstb	LOCAL_SGN(%a0)		|check for sign
-	bmi	truncate		|if positive then truncate
-	movel	#0xffffffff,%d0		|force g,r,s to be all f's
-	lea	add_to_l,%a1
-	movel	(%a1,%d1.w*4),%a1
-	jmp	(%a1)
-|
-|	ROUND MINUS INFINITY
-|
-|	If sign of fp number = 1 (negative), then add 1 to l.
-|
-rnd_mnus:
-	swap	%d1			|set up d1 for round prec.
-	tstb	LOCAL_SGN(%a0)		|check for sign
-	bpl	truncate		|if negative then truncate
-	movel	#0xffffffff,%d0		|force g,r,s to be all f's
-	lea	add_to_l,%a1
-	movel	(%a1,%d1.w*4),%a1
-	jmp	(%a1)
-|
-|	ROUND ZERO
-|
-|	Always truncate.
-rnd_zero:
-	swap	%d1			|set up d1 for round prec.
-	bra	truncate
-|
-|
-|	ROUND NEAREST
-|
-|	If (g=1), then add 1 to l and if (r=s=0), then clear l
-|	Note that this will round to even in case of a tie.
-|
-rnd_near:
-	swap	%d1			|set up d1 for round prec.
-	asll	#1,%d0			|shift g-bit to c-bit
-	bcc	truncate		|if (g=1) then
-	lea	add_to_l,%a1
-	movel	(%a1,%d1.w*4),%a1
-	jmp	(%a1)
-
-|
-|	ext_grs --- extract guard, round and sticky bits
-|
-| Input:	d1 =		PREC:ROUND
-| Output:	d0{31:29}=	guard, round, sticky
-|
-| The ext_grs extract the guard/round/sticky bits according to the
-| selected rounding precision. It is called by the round subroutine
-| only.  All registers except d0 are kept intact. d0 becomes an
-| updated guard,round,sticky in d0{31:29}
-|
-| Notes: the ext_grs uses the round PREC, and therefore has to swap d1
-|	 prior to usage, and needs to restore d1 to original.
-|
-ext_grs:
-	swap	%d1			|have d1.w point to round precision
-	cmpiw	#0,%d1
-	bnes	sgl_or_dbl
-	bras	end_ext_grs
-
-sgl_or_dbl:
-	moveml	%d2/%d3,-(%a7)		|make some temp registers
-	cmpiw	#1,%d1
-	bnes	grs_dbl
-grs_sgl:
-	bfextu	LOCAL_HI(%a0){#24:#2},%d3	|sgl prec. g-r are 2 bits right
-	movel	#30,%d2			|of the sgl prec. limits
-	lsll	%d2,%d3			|shift g-r bits to MSB of d3
-	movel	LOCAL_HI(%a0),%d2		|get word 2 for s-bit test
-	andil	#0x0000003f,%d2		|s bit is the or of all other
-	bnes	st_stky			|bits to the right of g-r
-	tstl	LOCAL_LO(%a0)		|test lower mantissa
-	bnes	st_stky			|if any are set, set sticky
-	tstl	%d0			|test original g,r,s
-	bnes	st_stky			|if any are set, set sticky
-	bras	end_sd			|if words 3 and 4 are clr, exit
-grs_dbl:
-	bfextu	LOCAL_LO(%a0){#21:#2},%d3	|dbl-prec. g-r are 2 bits right
-	movel	#30,%d2			|of the dbl prec. limits
-	lsll	%d2,%d3			|shift g-r bits to the MSB of d3
-	movel	LOCAL_LO(%a0),%d2		|get lower mantissa  for s-bit test
-	andil	#0x000001ff,%d2		|s bit is the or-ing of all
-	bnes	st_stky			|other bits to the right of g-r
-	tstl	%d0			|test word original g,r,s
-	bnes	st_stky			|if any are set, set sticky
-	bras	end_sd			|if clear, exit
-st_stky:
-	bset	#rnd_stky_bit,%d3
-end_sd:
-	movel	%d3,%d0			|return grs to d0
-	moveml	(%a7)+,%d2/%d3		|restore scratch registers
-end_ext_grs:
-	swap	%d1			|restore d1 to original
-	rts
-
-|*******************  Local Equates
-	.set	ad_1_sgl,0x00000100	|  constant to add 1 to l-bit in sgl prec
-	.set	ad_1_dbl,0x00000800	|  constant to add 1 to l-bit in dbl prec
-
-
-|Jump table for adding 1 to the l-bit indexed by rnd prec
-
-add_to_l:
-	.long	add_ext
-	.long	add_sgl
-	.long	add_dbl
-	.long	add_dbl
-|
-|	ADD SINGLE
-|
-add_sgl:
-	addl	#ad_1_sgl,LOCAL_HI(%a0)
-	bccs	scc_clr			|no mantissa overflow
-	roxrw  LOCAL_HI(%a0)		|shift v-bit back in
-	roxrw  LOCAL_HI+2(%a0)		|shift v-bit back in
-	addw	#0x1,LOCAL_EX(%a0)	|and incr exponent
-scc_clr:
-	tstl	%d0			|test for rs = 0
-	bnes	sgl_done
-	andiw  #0xfe00,LOCAL_HI+2(%a0)	|clear the l-bit
-sgl_done:
-	andil	#0xffffff00,LOCAL_HI(%a0) |truncate bits beyond sgl limit
-	clrl	LOCAL_LO(%a0)		|clear d2
-	rts
-
-|
-|	ADD EXTENDED
-|
-add_ext:
-	addql  #1,LOCAL_LO(%a0)		|add 1 to l-bit
-	bccs	xcc_clr			|test for carry out
-	addql  #1,LOCAL_HI(%a0)		|propagate carry
-	bccs	xcc_clr
-	roxrw  LOCAL_HI(%a0)		|mant is 0 so restore v-bit
-	roxrw  LOCAL_HI+2(%a0)		|mant is 0 so restore v-bit
-	roxrw	LOCAL_LO(%a0)
-	roxrw	LOCAL_LO+2(%a0)
-	addw	#0x1,LOCAL_EX(%a0)	|and inc exp
-xcc_clr:
-	tstl	%d0			|test rs = 0
-	bnes	add_ext_done
-	andib	#0xfe,LOCAL_LO+3(%a0)	|clear the l bit
-add_ext_done:
-	rts
-|
-|	ADD DOUBLE
-|
-add_dbl:
-	addl	#ad_1_dbl,LOCAL_LO(%a0)
-	bccs	dcc_clr
-	addql	#1,LOCAL_HI(%a0)		|propagate carry
-	bccs	dcc_clr
-	roxrw	LOCAL_HI(%a0)		|mant is 0 so restore v-bit
-	roxrw	LOCAL_HI+2(%a0)		|mant is 0 so restore v-bit
-	roxrw	LOCAL_LO(%a0)
-	roxrw	LOCAL_LO+2(%a0)
-	addw	#0x1,LOCAL_EX(%a0)	|incr exponent
-dcc_clr:
-	tstl	%d0			|test for rs = 0
-	bnes	dbl_done
-	andiw	#0xf000,LOCAL_LO+2(%a0)	|clear the l-bit
-
-dbl_done:
-	andil	#0xfffff800,LOCAL_LO(%a0) |truncate bits beyond dbl limit
-	rts
-
-error:
-	rts
-|
-| Truncate all other bits
-|
-trunct:
-	.long	end_rnd
-	.long	sgl_done
-	.long	dbl_done
-	.long	dbl_done
-
-truncate:
-	lea	trunct,%a1
-	movel	(%a1,%d1.w*4),%a1
-	jmp	(%a1)
-
-end_rnd:
-	rts
-
-|
-|	NORMALIZE
-|
-| These routines (nrm_zero & nrm_set) normalize the unnorm.  This
-| is done by shifting the mantissa left while decrementing the
-| exponent.
-|
-| NRM_SET shifts and decrements until there is a 1 set in the integer
-| bit of the mantissa (msb in d1).
-|
-| NRM_ZERO shifts and decrements until there is a 1 set in the integer
-| bit of the mantissa (msb in d1) unless this would mean the exponent
-| would go less than 0.  In that case the number becomes a denorm - the
-| exponent (d0) is set to 0 and the mantissa (d1 & d2) is not
-| normalized.
-|
-| Note that both routines have been optimized (for the worst case) and
-| therefore do not have the easy to follow decrement/shift loop.
-|
-|	NRM_ZERO
-|
-|	Distance to first 1 bit in mantissa = X
-|	Distance to 0 from exponent = Y
-|	If X < Y
-|	Then
-|	  nrm_set
-|	Else
-|	  shift mantissa by Y
-|	  set exponent = 0
-|
-|input:
-|	FP_SCR1 = exponent, ms mantissa part, ls mantissa part
-|output:
-|	L_SCR1{4} = fpte15 or ete15 bit
-|
-	.global	nrm_zero
-nrm_zero:
-	movew	LOCAL_EX(%a0),%d0
-	cmpw   #64,%d0          |see if exp > 64
-	bmis	d0_less
-	bsr	nrm_set		|exp > 64 so exp won't exceed 0
-	rts
-d0_less:
-	moveml	%d2/%d3/%d5/%d6,-(%a7)
-	movel	LOCAL_HI(%a0),%d1
-	movel	LOCAL_LO(%a0),%d2
-
-	bfffo	%d1{#0:#32},%d3	|get the distance to the first 1
-|				;in ms mant
-	beqs	ms_clr		|branch if no bits were set
-	cmpw	%d3,%d0		|of X>Y
-	bmis	greater		|then exp will go past 0 (neg) if
-|				;it is just shifted
-	bsr	nrm_set		|else exp won't go past 0
-	moveml	(%a7)+,%d2/%d3/%d5/%d6
-	rts
-greater:
-	movel	%d2,%d6		|save ls mant in d6
-	lsll	%d0,%d2		|shift ls mant by count
-	lsll	%d0,%d1		|shift ms mant by count
-	movel	#32,%d5
-	subl	%d0,%d5		|make op a denorm by shifting bits
-	lsrl	%d5,%d6		|by the number in the exp, then
-|				;set exp = 0.
-	orl	%d6,%d1		|shift the ls mant bits into the ms mant
-	movel	#0,%d0		|same as if decremented exp to 0
-|				;while shifting
-	movew	%d0,LOCAL_EX(%a0)
-	movel	%d1,LOCAL_HI(%a0)
-	movel	%d2,LOCAL_LO(%a0)
-	moveml	(%a7)+,%d2/%d3/%d5/%d6
-	rts
-ms_clr:
-	bfffo	%d2{#0:#32},%d3	|check if any bits set in ls mant
-	beqs	all_clr		|branch if none set
-	addw	#32,%d3
-	cmpw	%d3,%d0		|if X>Y
-	bmis	greater		|then branch
-	bsr	nrm_set		|else exp won't go past 0
-	moveml	(%a7)+,%d2/%d3/%d5/%d6
-	rts
-all_clr:
-	movew	#0,LOCAL_EX(%a0)	|no mantissa bits set. Set exp = 0.
-	moveml	(%a7)+,%d2/%d3/%d5/%d6
-	rts
-|
-|	NRM_SET
-|
-	.global	nrm_set
-nrm_set:
-	movel	%d7,-(%a7)
-	bfffo	LOCAL_HI(%a0){#0:#32},%d7 |find first 1 in ms mant to d7)
-	beqs	lower		|branch if ms mant is all 0's
-
-	movel	%d6,-(%a7)
-
-	subw	%d7,LOCAL_EX(%a0)	|sub exponent by count
-	movel	LOCAL_HI(%a0),%d0	|d0 has ms mant
-	movel	LOCAL_LO(%a0),%d1 |d1 has ls mant
-
-	lsll	%d7,%d0		|shift first 1 to j bit position
-	movel	%d1,%d6		|copy ls mant into d6
-	lsll	%d7,%d6		|shift ls mant by count
-	movel	%d6,LOCAL_LO(%a0)	|store ls mant into memory
-	moveql	#32,%d6
-	subl	%d7,%d6		|continue shift
-	lsrl	%d6,%d1		|shift off all bits but those that will
-|				;be shifted into ms mant
-	orl	%d1,%d0		|shift the ls mant bits into the ms mant
-	movel	%d0,LOCAL_HI(%a0)	|store ms mant into memory
-	moveml	(%a7)+,%d7/%d6	|restore registers
-	rts
-
-|
-| We get here if ms mant was = 0, and we assume ls mant has bits
-| set (otherwise this would have been tagged a zero not a denorm).
-|
-lower:
-	movew	LOCAL_EX(%a0),%d0	|d0 has exponent
-	movel	LOCAL_LO(%a0),%d1	|d1 has ls mant
-	subw	#32,%d0		|account for ms mant being all zeros
-	bfffo	%d1{#0:#32},%d7	|find first 1 in ls mant to d7)
-	subw	%d7,%d0		|subtract shift count from exp
-	lsll	%d7,%d1		|shift first 1 to integer bit in ms mant
-	movew	%d0,LOCAL_EX(%a0)	|store ms mant
-	movel	%d1,LOCAL_HI(%a0)	|store exp
-	clrl	LOCAL_LO(%a0)	|clear ls mant
-	movel	(%a7)+,%d7
-	rts
-|
-|	denorm --- denormalize an intermediate result
-|
-|	Used by underflow.
-|
-| Input:
-|	a0	 points to the operand to be denormalized
-|		 (in the internal extended format)
-|
-|	d0:	 rounding precision
-| Output:
-|	a0	 points to the denormalized result
-|		 (in the internal extended format)
-|
-|	d0	is guard,round,sticky
-|
-| d0 comes into this routine with the rounding precision. It
-| is then loaded with the denormalized exponent threshold for the
-| rounding precision.
-|
-
-	.global	denorm
-denorm:
-	btstb	#6,LOCAL_EX(%a0)	|check for exponents between $7fff-$4000
-	beqs	no_sgn_ext
-	bsetb	#7,LOCAL_EX(%a0)	|sign extend if it is so
-no_sgn_ext:
-
-	cmpib	#0,%d0		|if 0 then extended precision
-	bnes	not_ext		|else branch
-
-	clrl	%d1		|load d1 with ext threshold
-	clrl	%d0		|clear the sticky flag
-	bsr	dnrm_lp		|denormalize the number
-	tstb	%d1		|check for inex
-	beq	no_inex		|if clr, no inex
-	bras	dnrm_inex	|if set, set inex
-
-not_ext:
-	cmpil	#1,%d0		|if 1 then single precision
-	beqs	load_sgl	|else must be 2, double prec
-
-load_dbl:
-	movew	#dbl_thresh,%d1	|put copy of threshold in d1
-	movel	%d1,%d0		|copy d1 into d0
-	subw	LOCAL_EX(%a0),%d0	|diff = threshold - exp
-	cmpw	#67,%d0		|if diff > 67 (mant + grs bits)
-	bpls	chk_stky	|then branch (all bits would be
-|				; shifted off in denorm routine)
-	clrl	%d0		|else clear the sticky flag
-	bsr	dnrm_lp		|denormalize the number
-	tstb	%d1		|check flag
-	beqs	no_inex		|if clr, no inex
-	bras	dnrm_inex	|if set, set inex
-
-load_sgl:
-	movew	#sgl_thresh,%d1	|put copy of threshold in d1
-	movel	%d1,%d0		|copy d1 into d0
-	subw	LOCAL_EX(%a0),%d0	|diff = threshold - exp
-	cmpw	#67,%d0		|if diff > 67 (mant + grs bits)
-	bpls	chk_stky	|then branch (all bits would be
-|				; shifted off in denorm routine)
-	clrl	%d0		|else clear the sticky flag
-	bsr	dnrm_lp		|denormalize the number
-	tstb	%d1		|check flag
-	beqs	no_inex		|if clr, no inex
-	bras	dnrm_inex	|if set, set inex
-
-chk_stky:
-	tstl	LOCAL_HI(%a0)	|check for any bits set
-	bnes	set_stky
-	tstl	LOCAL_LO(%a0)	|check for any bits set
-	bnes	set_stky
-	bras	clr_mant
-set_stky:
-	orl	#inx2a_mask,USER_FPSR(%a6) |set inex2/ainex
-	movel	#0x20000000,%d0	|set sticky bit in return value
-clr_mant:
-	movew	%d1,LOCAL_EX(%a0)		|load exp with threshold
-	movel	#0,LOCAL_HI(%a0)	|set d1 = 0 (ms mantissa)
-	movel	#0,LOCAL_LO(%a0)		|set d2 = 0 (ms mantissa)
-	rts
-dnrm_inex:
-	orl	#inx2a_mask,USER_FPSR(%a6) |set inex2/ainex
-no_inex:
-	rts
-
-|
-|	dnrm_lp --- normalize exponent/mantissa to specified threshold
-|
-| Input:
-|	a0		points to the operand to be denormalized
-|	d0{31:29}	initial guard,round,sticky
-|	d1{15:0}	denormalization threshold
-| Output:
-|	a0		points to the denormalized operand
-|	d0{31:29}	final guard,round,sticky
-|	d1.b		inexact flag:  all ones means inexact result
-|
-| The LOCAL_LO and LOCAL_GRS parts of the value are copied to FP_SCR2
-| so that bfext can be used to extract the new low part of the mantissa.
-| Dnrm_lp can be called with a0 pointing to ETEMP or WBTEMP and there
-| is no LOCAL_GRS scratch word following it on the fsave frame.
-|
-	.global	dnrm_lp
-dnrm_lp:
-	movel	%d2,-(%sp)		|save d2 for temp use
-	btstb	#E3,E_BYTE(%a6)		|test for type E3 exception
-	beqs	not_E3			|not type E3 exception
-	bfextu	WBTEMP_GRS(%a6){#6:#3},%d2	|extract guard,round, sticky  bit
-	movel	#29,%d0
-	lsll	%d0,%d2			|shift g,r,s to their positions
-	movel	%d2,%d0
-not_E3:
-	movel	(%sp)+,%d2		|restore d2
-	movel	LOCAL_LO(%a0),FP_SCR2+LOCAL_LO(%a6)
-	movel	%d0,FP_SCR2+LOCAL_GRS(%a6)
-	movel	%d1,%d0			|copy the denorm threshold
-	subw	LOCAL_EX(%a0),%d1		|d1 = threshold - uns exponent
-	bles	no_lp			|d1 <= 0
-	cmpw	#32,%d1
-	blts	case_1			|0 = d1 < 32
-	cmpw	#64,%d1
-	blts	case_2			|32 <= d1 < 64
-	bra	case_3			|d1 >= 64
-|
-| No normalization necessary
-|
-no_lp:
-	clrb	%d1			|set no inex2 reported
-	movel	FP_SCR2+LOCAL_GRS(%a6),%d0	|restore original g,r,s
-	rts
-|
-| case (0<d1<32)
-|
-case_1:
-	movel	%d2,-(%sp)
-	movew	%d0,LOCAL_EX(%a0)		|exponent = denorm threshold
-	movel	#32,%d0
-	subw	%d1,%d0			|d0 = 32 - d1
-	bfextu	LOCAL_EX(%a0){%d0:#32},%d2
-	bfextu	%d2{%d1:%d0},%d2		|d2 = new LOCAL_HI
-	bfextu	LOCAL_HI(%a0){%d0:#32},%d1	|d1 = new LOCAL_LO
-	bfextu	FP_SCR2+LOCAL_LO(%a6){%d0:#32},%d0	|d0 = new G,R,S
-	movel	%d2,LOCAL_HI(%a0)		|store new LOCAL_HI
-	movel	%d1,LOCAL_LO(%a0)		|store new LOCAL_LO
-	clrb	%d1
-	bftst	%d0{#2:#30}
-	beqs	c1nstky
-	bsetl	#rnd_stky_bit,%d0
-	st	%d1
-c1nstky:
-	movel	FP_SCR2+LOCAL_GRS(%a6),%d2	|restore original g,r,s
-	andil	#0xe0000000,%d2		|clear all but G,R,S
-	tstl	%d2			|test if original G,R,S are clear
-	beqs	grs_clear
-	orl	#0x20000000,%d0		|set sticky bit in d0
-grs_clear:
-	andil	#0xe0000000,%d0		|clear all but G,R,S
-	movel	(%sp)+,%d2
-	rts
-|
-| case (32<=d1<64)
-|
-case_2:
-	movel	%d2,-(%sp)
-	movew	%d0,LOCAL_EX(%a0)		|unsigned exponent = threshold
-	subw	#32,%d1			|d1 now between 0 and 32
-	movel	#32,%d0
-	subw	%d1,%d0			|d0 = 32 - d1
-	bfextu	LOCAL_EX(%a0){%d0:#32},%d2
-	bfextu	%d2{%d1:%d0},%d2		|d2 = new LOCAL_LO
-	bfextu	LOCAL_HI(%a0){%d0:#32},%d1	|d1 = new G,R,S
-	bftst	%d1{#2:#30}
-	bnes	c2_sstky		|bra if sticky bit to be set
-	bftst	FP_SCR2+LOCAL_LO(%a6){%d0:#32}
-	bnes	c2_sstky		|bra if sticky bit to be set
-	movel	%d1,%d0
-	clrb	%d1
-	bras	end_c2
-c2_sstky:
-	movel	%d1,%d0
-	bsetl	#rnd_stky_bit,%d0
-	st	%d1
-end_c2:
-	clrl	LOCAL_HI(%a0)		|store LOCAL_HI = 0
-	movel	%d2,LOCAL_LO(%a0)		|store LOCAL_LO
-	movel	FP_SCR2+LOCAL_GRS(%a6),%d2	|restore original g,r,s
-	andil	#0xe0000000,%d2		|clear all but G,R,S
-	tstl	%d2			|test if original G,R,S are clear
-	beqs	clear_grs
-	orl	#0x20000000,%d0		|set sticky bit in d0
-clear_grs:
-	andil	#0xe0000000,%d0		|get rid of all but G,R,S
-	movel	(%sp)+,%d2
-	rts
-|
-| d1 >= 64 Force the exponent to be the denorm threshold with the
-| correct sign.
-|
-case_3:
-	movew	%d0,LOCAL_EX(%a0)
-	tstw	LOCAL_SGN(%a0)
-	bges	c3con
-c3neg:
-	orl	#0x80000000,LOCAL_EX(%a0)
-c3con:
-	cmpw	#64,%d1
-	beqs	sixty_four
-	cmpw	#65,%d1
-	beqs	sixty_five
-|
-| Shift value is out of range.  Set d1 for inex2 flag and
-| return a zero with the given threshold.
-|
-	clrl	LOCAL_HI(%a0)
-	clrl	LOCAL_LO(%a0)
-	movel	#0x20000000,%d0
-	st	%d1
-	rts
-
-sixty_four:
-	movel	LOCAL_HI(%a0),%d0
-	bfextu	%d0{#2:#30},%d1
-	andil	#0xc0000000,%d0
-	bras	c3com
-
-sixty_five:
-	movel	LOCAL_HI(%a0),%d0
-	bfextu	%d0{#1:#31},%d1
-	andil	#0x80000000,%d0
-	lsrl	#1,%d0			|shift high bit into R bit
-
-c3com:
-	tstl	%d1
-	bnes	c3ssticky
-	tstl	LOCAL_LO(%a0)
-	bnes	c3ssticky
-	tstb	FP_SCR2+LOCAL_GRS(%a6)
-	bnes	c3ssticky
-	clrb	%d1
-	bras	c3end
-
-c3ssticky:
-	bsetl	#rnd_stky_bit,%d0
-	st	%d1
-c3end:
-	clrl	LOCAL_HI(%a0)
-	clrl	LOCAL_LO(%a0)
-	rts
-
-	|end
diff --git a/ANDROID_3.4.5/arch/m68k/fpsp040/sacos.S b/ANDROID_3.4.5/arch/m68k/fpsp040/sacos.S
deleted file mode 100644
index 513c7cca..00000000
--- a/ANDROID_3.4.5/arch/m68k/fpsp040/sacos.S
+++ /dev/null
@@ -1,114 +0,0 @@
-|
-|	sacos.sa 3.3 12/19/90
-|
-|	Description: The entry point sAcos computes the inverse cosine of
-|		an input argument; sAcosd does the same except for denormalized
-|		input.
-|
-|	Input: Double-extended number X in location pointed to
-|		by address register a0.
-|
-|	Output: The value arccos(X) returned in floating-point register Fp0.
-|
-|	Accuracy and Monotonicity: The returned result is within 3 ulps in
-|		64 significant bit, i.e. within 0.5001 ulp to 53 bits if the
-|		result is subsequently rounded to double precision. The
-|		result is provably monotonic in double precision.
-|
-|	Speed: The program sCOS takes approximately 310 cycles.
-|
-|	Algorithm:
-|
-|	ACOS
-|	1. If |X| >= 1, go to 3.
-|
-|	2. (|X| < 1) Calculate acos(X) by
-|		z := (1-X) / (1+X)
-|		acos(X) = 2 * atan( sqrt(z) ).
-|		Exit.
-|
-|	3. If |X| > 1, go to 5.
-|
-|	4. (|X| = 1) If X > 0, return 0. Otherwise, return Pi. Exit.
-|
-|	5. (|X| > 1) Generate an invalid operation by 0 * infinity.
-|		Exit.
-|
-
-|		Copyright (C) Motorola, Inc. 1990
-|			All Rights Reserved
-|
-|       For details on the license for this file, please see the
-|       file, README, in this same directory.
-
-|SACOS	idnt	2,1 | Motorola 040 Floating Point Software Package
-
-	|section	8
-
-PI:	.long 0x40000000,0xC90FDAA2,0x2168C235,0x00000000
-PIBY2:	.long 0x3FFF0000,0xC90FDAA2,0x2168C235,0x00000000
-
-	|xref	t_operr
-	|xref	t_frcinx
-	|xref	satan
-
-	.global	sacosd
-sacosd:
-|--ACOS(X) = PI/2 FOR DENORMALIZED X
-	fmovel		%d1,%fpcr		| ...load user's rounding mode/precision
-	fmovex		PIBY2,%fp0
-	bra		t_frcinx
-
-	.global	sacos
-sacos:
-	fmovex		(%a0),%fp0	| ...LOAD INPUT
-
-	movel		(%a0),%d0		| ...pack exponent with upper 16 fraction
-	movew		4(%a0),%d0
-	andil		#0x7FFFFFFF,%d0
-	cmpil		#0x3FFF8000,%d0
-	bges		ACOSBIG
-
-|--THIS IS THE USUAL CASE, |X| < 1
-|--ACOS(X) = 2 * ATAN(	SQRT( (1-X)/(1+X) )	)
-
-	fmoves		#0x3F800000,%fp1
-	faddx		%fp0,%fp1		| ...1+X
-	fnegx		%fp0		| ... -X
-	fadds		#0x3F800000,%fp0	| ...1-X
-	fdivx		%fp1,%fp0		| ...(1-X)/(1+X)
-	fsqrtx		%fp0		| ...SQRT((1-X)/(1+X))
-	fmovemx	%fp0-%fp0,(%a0)	| ...overwrite input
-	movel		%d1,-(%sp)	|save original users fpcr
-	clrl		%d1
-	bsr		satan		| ...ATAN(SQRT([1-X]/[1+X]))
-	fmovel		(%sp)+,%fpcr	|restore users exceptions
-	faddx		%fp0,%fp0		| ...2 * ATAN( STUFF )
-	bra		t_frcinx
-
-ACOSBIG:
-	fabsx		%fp0
-	fcmps		#0x3F800000,%fp0
-	fbgt		t_operr		|cause an operr exception
-
-|--|X| = 1, ACOS(X) = 0 OR PI
-	movel		(%a0),%d0		| ...pack exponent with upper 16 fraction
-	movew		4(%a0),%d0
-	cmpl		#0,%d0		|D0 has original exponent+fraction
-	bgts		ACOSP1
-
-|--X = -1
-|Returns PI and inexact exception
-	fmovex		PI,%fp0
-	fmovel		%d1,%FPCR
-	fadds		#0x00800000,%fp0	|cause an inexact exception to be put
-|					;into the 040 - will not trap until next
-|					;fp inst.
-	bra		t_frcinx
-
-ACOSP1:
-	fmovel		%d1,%FPCR
-	fmoves		#0x00000000,%fp0
-	rts				|Facos ; of +1 is exact
-
-	|end
diff --git a/ANDROID_3.4.5/arch/m68k/fpsp040/sasin.S b/ANDROID_3.4.5/arch/m68k/fpsp040/sasin.S
deleted file mode 100644
index 2a269a58..00000000
--- a/ANDROID_3.4.5/arch/m68k/fpsp040/sasin.S
+++ /dev/null
@@ -1,103 +0,0 @@
-|
-|	sasin.sa 3.3 12/19/90
-|
-|	Description: The entry point sAsin computes the inverse sine of
-|		an input argument; sAsind does the same except for denormalized
-|		input.
-|
-|	Input: Double-extended number X in location pointed to
-|		by address register a0.
-|
-|	Output: The value arcsin(X) returned in floating-point register Fp0.
-|
-|	Accuracy and Monotonicity: The returned result is within 3 ulps in
-|		64 significant bit, i.e. within 0.5001 ulp to 53 bits if the
-|		result is subsequently rounded to double precision. The
-|		result is provably monotonic in double precision.
-|
-|	Speed: The program sASIN takes approximately 310 cycles.
-|
-|	Algorithm:
-|
-|	ASIN
-|	1. If |X| >= 1, go to 3.
-|
-|	2. (|X| < 1) Calculate asin(X) by
-|		z := sqrt( [1-X][1+X] )
-|		asin(X) = atan( x / z ).
-|		Exit.
-|
-|	3. If |X| > 1, go to 5.
-|
-|	4. (|X| = 1) sgn := sign(X), return asin(X) := sgn * Pi/2. Exit.
-|
-|	5. (|X| > 1) Generate an invalid operation by 0 * infinity.
-|		Exit.
-|
-
-|		Copyright (C) Motorola, Inc. 1990
-|			All Rights Reserved
-|
-|       For details on the license for this file, please see the
-|       file, README, in this same directory.
-
-|SASIN	idnt	2,1 | Motorola 040 Floating Point Software Package
-
-	|section	8
-
-PIBY2:	.long 0x3FFF0000,0xC90FDAA2,0x2168C235,0x00000000
-
-	|xref	t_operr
-	|xref	t_frcinx
-	|xref	t_extdnrm
-	|xref	satan
-
-	.global	sasind
-sasind:
-|--ASIN(X) = X FOR DENORMALIZED X
-
-	bra		t_extdnrm
-
-	.global	sasin
-sasin:
-	fmovex		(%a0),%fp0	| ...LOAD INPUT
-
-	movel		(%a0),%d0
-	movew		4(%a0),%d0
-	andil		#0x7FFFFFFF,%d0
-	cmpil		#0x3FFF8000,%d0
-	bges		asinbig
-
-|--THIS IS THE USUAL CASE, |X| < 1
-|--ASIN(X) = ATAN( X / SQRT( (1-X)(1+X) ) )
-
-	fmoves		#0x3F800000,%fp1
-	fsubx		%fp0,%fp1		| ...1-X
-	fmovemx	%fp2-%fp2,-(%a7)
-	fmoves		#0x3F800000,%fp2
-	faddx		%fp0,%fp2		| ...1+X
-	fmulx		%fp2,%fp1		| ...(1+X)(1-X)
-	fmovemx	(%a7)+,%fp2-%fp2
-	fsqrtx		%fp1		| ...SQRT([1-X][1+X])
-	fdivx		%fp1,%fp0		| ...X/SQRT([1-X][1+X])
-	fmovemx	%fp0-%fp0,(%a0)
-	bsr		satan
-	bra		t_frcinx
-
-asinbig:
-	fabsx		%fp0	 | ...|X|
-	fcmps		#0x3F800000,%fp0
-	fbgt		t_operr		|cause an operr exception
-
-|--|X| = 1, ASIN(X) = +- PI/2.
-
-	fmovex		PIBY2,%fp0
-	movel		(%a0),%d0
-	andil		#0x80000000,%d0	| ...SIGN BIT OF X
-	oril		#0x3F800000,%d0	| ...+-1 IN SGL FORMAT
-	movel		%d0,-(%sp)	| ...push SIGN(X) IN SGL-FMT
-	fmovel		%d1,%FPCR
-	fmuls		(%sp)+,%fp0
-	bra		t_frcinx
-
-	|end
diff --git a/ANDROID_3.4.5/arch/m68k/fpsp040/satan.S b/ANDROID_3.4.5/arch/m68k/fpsp040/satan.S
deleted file mode 100644
index c8a66499..00000000
--- a/ANDROID_3.4.5/arch/m68k/fpsp040/satan.S
+++ /dev/null
@@ -1,477 +0,0 @@
-|
-|	satan.sa 3.3 12/19/90
-|
-|	The entry point satan computes the arctangent of an
-|	input value. satand does the same except the input value is a
-|	denormalized number.
-|
-|	Input: Double-extended value in memory location pointed to by address
-|		register a0.
-|
-|	Output:	Arctan(X) returned in floating-point register Fp0.
-|
-|	Accuracy and Monotonicity: The returned result is within 2 ulps in
-|		64 significant bit, i.e. within 0.5001 ulp to 53 bits if the
-|		result is subsequently rounded to double precision. The
-|		result is provably monotonic in double precision.
-|
-|	Speed: The program satan takes approximately 160 cycles for input
-|		argument X such that 1/16 < |X| < 16. For the other arguments,
-|		the program will run no worse than 10% slower.
-|
-|	Algorithm:
-|	Step 1. If |X| >= 16 or |X| < 1/16, go to Step 5.
-|
-|	Step 2. Let X = sgn * 2**k * 1.xxxxxxxx...x. Note that k = -4, -3,..., or 3.
-|		Define F = sgn * 2**k * 1.xxxx1, i.e. the first 5 significant bits
-|		of X with a bit-1 attached at the 6-th bit position. Define u
-|		to be u = (X-F) / (1 + X*F).
-|
-|	Step 3. Approximate arctan(u) by a polynomial poly.
-|
-|	Step 4. Return arctan(F) + poly, arctan(F) is fetched from a table of values
-|		calculated beforehand. Exit.
-|
-|	Step 5. If |X| >= 16, go to Step 7.
-|
-|	Step 6. Approximate arctan(X) by an odd polynomial in X. Exit.
-|
-|	Step 7. Define X' = -1/X. Approximate arctan(X') by an odd polynomial in X'.
-|		Arctan(X) = sign(X)*Pi/2 + arctan(X'). Exit.
-|
-
-|		Copyright (C) Motorola, Inc. 1990
-|			All Rights Reserved
-|
-|       For details on the license for this file, please see the
-|       file, README, in this same directory.
-
-|satan	idnt	2,1 | Motorola 040 Floating Point Software Package
-
-	|section	8
-
-#include "fpsp.h"
-
-BOUNDS1:	.long 0x3FFB8000,0x4002FFFF
-
-ONE:	.long 0x3F800000
-
-	.long 0x00000000
-
-ATANA3:	.long 0xBFF6687E,0x314987D8
-ATANA2:	.long 0x4002AC69,0x34A26DB3
-
-ATANA1:	.long 0xBFC2476F,0x4E1DA28E
-ATANB6:	.long 0x3FB34444,0x7F876989
-
-ATANB5:	.long 0xBFB744EE,0x7FAF45DB
-ATANB4:	.long 0x3FBC71C6,0x46940220
-
-ATANB3:	.long 0xBFC24924,0x921872F9
-ATANB2:	.long 0x3FC99999,0x99998FA9
-
-ATANB1:	.long 0xBFD55555,0x55555555
-ATANC5:	.long 0xBFB70BF3,0x98539E6A
-
-ATANC4:	.long 0x3FBC7187,0x962D1D7D
-ATANC3:	.long 0xBFC24924,0x827107B8
-
-ATANC2:	.long 0x3FC99999,0x9996263E
-ATANC1:	.long 0xBFD55555,0x55555536
-
-PPIBY2:	.long 0x3FFF0000,0xC90FDAA2,0x2168C235,0x00000000
-NPIBY2:	.long 0xBFFF0000,0xC90FDAA2,0x2168C235,0x00000000
-PTINY:	.long 0x00010000,0x80000000,0x00000000,0x00000000
-NTINY:	.long 0x80010000,0x80000000,0x00000000,0x00000000
-
-ATANTBL:
-	.long	0x3FFB0000,0x83D152C5,0x060B7A51,0x00000000
-	.long	0x3FFB0000,0x8BC85445,0x65498B8B,0x00000000
-	.long	0x3FFB0000,0x93BE4060,0x17626B0D,0x00000000
-	.long	0x3FFB0000,0x9BB3078D,0x35AEC202,0x00000000
-	.long	0x3FFB0000,0xA3A69A52,0x5DDCE7DE,0x00000000
-	.long	0x3FFB0000,0xAB98E943,0x62765619,0x00000000
-	.long	0x3FFB0000,0xB389E502,0xF9C59862,0x00000000
-	.long	0x3FFB0000,0xBB797E43,0x6B09E6FB,0x00000000
-	.long	0x3FFB0000,0xC367A5C7,0x39E5F446,0x00000000
-	.long	0x3FFB0000,0xCB544C61,0xCFF7D5C6,0x00000000
-	.long	0x3FFB0000,0xD33F62F8,0x2488533E,0x00000000
-	.long	0x3FFB0000,0xDB28DA81,0x62404C77,0x00000000
-	.long	0x3FFB0000,0xE310A407,0x8AD34F18,0x00000000
-	.long	0x3FFB0000,0xEAF6B0A8,0x188EE1EB,0x00000000
-	.long	0x3FFB0000,0xF2DAF194,0x9DBE79D5,0x00000000
-	.long	0x3FFB0000,0xFABD5813,0x61D47E3E,0x00000000
-	.long	0x3FFC0000,0x8346AC21,0x0959ECC4,0x00000000
-	.long	0x3FFC0000,0x8B232A08,0x304282D8,0x00000000
-	.long	0x3FFC0000,0x92FB70B8,0xD29AE2F9,0x00000000
-	.long	0x3FFC0000,0x9ACF476F,0x5CCD1CB4,0x00000000
-	.long	0x3FFC0000,0xA29E7630,0x4954F23F,0x00000000
-	.long	0x3FFC0000,0xAA68C5D0,0x8AB85230,0x00000000
-	.long	0x3FFC0000,0xB22DFFFD,0x9D539F83,0x00000000
-	.long	0x3FFC0000,0xB9EDEF45,0x3E900EA5,0x00000000
-	.long	0x3FFC0000,0xC1A85F1C,0xC75E3EA5,0x00000000
-	.long	0x3FFC0000,0xC95D1BE8,0x28138DE6,0x00000000
-	.long	0x3FFC0000,0xD10BF300,0x840D2DE4,0x00000000
-	.long	0x3FFC0000,0xD8B4B2BA,0x6BC05E7A,0x00000000
-	.long	0x3FFC0000,0xE0572A6B,0xB42335F6,0x00000000
-	.long	0x3FFC0000,0xE7F32A70,0xEA9CAA8F,0x00000000
-	.long	0x3FFC0000,0xEF888432,0x64ECEFAA,0x00000000
-	.long	0x3FFC0000,0xF7170A28,0xECC06666,0x00000000
-	.long	0x3FFD0000,0x812FD288,0x332DAD32,0x00000000
-	.long	0x3FFD0000,0x88A8D1B1,0x218E4D64,0x00000000
-	.long	0x3FFD0000,0x9012AB3F,0x23E4AEE8,0x00000000
-	.long	0x3FFD0000,0x976CC3D4,0x11E7F1B9,0x00000000
-	.long	0x3FFD0000,0x9EB68949,0x3889A227,0x00000000
-	.long	0x3FFD0000,0xA5EF72C3,0x4487361B,0x00000000
-	.long	0x3FFD0000,0xAD1700BA,0xF07A7227,0x00000000
-	.long	0x3FFD0000,0xB42CBCFA,0xFD37EFB7,0x00000000
-	.long	0x3FFD0000,0xBB303A94,0x0BA80F89,0x00000000
-	.long	0x3FFD0000,0xC22115C6,0xFCAEBBAF,0x00000000
-	.long	0x3FFD0000,0xC8FEF3E6,0x86331221,0x00000000
-	.long	0x3FFD0000,0xCFC98330,0xB4000C70,0x00000000
-	.long	0x3FFD0000,0xD6807AA1,0x102C5BF9,0x00000000
-	.long	0x3FFD0000,0xDD2399BC,0x31252AA3,0x00000000
-	.long	0x3FFD0000,0xE3B2A855,0x6B8FC517,0x00000000
-	.long	0x3FFD0000,0xEA2D764F,0x64315989,0x00000000
-	.long	0x3FFD0000,0xF3BF5BF8,0xBAD1A21D,0x00000000
-	.long	0x3FFE0000,0x801CE39E,0x0D205C9A,0x00000000
-	.long	0x3FFE0000,0x8630A2DA,0xDA1ED066,0x00000000
-	.long	0x3FFE0000,0x8C1AD445,0xF3E09B8C,0x00000000
-	.long	0x3FFE0000,0x91DB8F16,0x64F350E2,0x00000000
-	.long	0x3FFE0000,0x97731420,0x365E538C,0x00000000
-	.long	0x3FFE0000,0x9CE1C8E6,0xA0B8CDBA,0x00000000
-	.long	0x3FFE0000,0xA22832DB,0xCADAAE09,0x00000000
-	.long	0x3FFE0000,0xA746F2DD,0xB7602294,0x00000000
-	.long	0x3FFE0000,0xAC3EC0FB,0x997DD6A2,0x00000000
-	.long	0x3FFE0000,0xB110688A,0xEBDC6F6A,0x00000000
-	.long	0x3FFE0000,0xB5BCC490,0x59ECC4B0,0x00000000
-	.long	0x3FFE0000,0xBA44BC7D,0xD470782F,0x00000000
-	.long	0x3FFE0000,0xBEA94144,0xFD049AAC,0x00000000
-	.long	0x3FFE0000,0xC2EB4ABB,0x661628B6,0x00000000
-	.long	0x3FFE0000,0xC70BD54C,0xE602EE14,0x00000000
-	.long	0x3FFE0000,0xCD000549,0xADEC7159,0x00000000
-	.long	0x3FFE0000,0xD48457D2,0xD8EA4EA3,0x00000000
-	.long	0x3FFE0000,0xDB948DA7,0x12DECE3B,0x00000000
-	.long	0x3FFE0000,0xE23855F9,0x69E8096A,0x00000000
-	.long	0x3FFE0000,0xE8771129,0xC4353259,0x00000000
-	.long	0x3FFE0000,0xEE57C16E,0x0D379C0D,0x00000000
-	.long	0x3FFE0000,0xF3E10211,0xA87C3779,0x00000000
-	.long	0x3FFE0000,0xF919039D,0x758B8D41,0x00000000
-	.long	0x3FFE0000,0xFE058B8F,0x64935FB3,0x00000000
-	.long	0x3FFF0000,0x8155FB49,0x7B685D04,0x00000000
-	.long	0x3FFF0000,0x83889E35,0x49D108E1,0x00000000
-	.long	0x3FFF0000,0x859CFA76,0x511D724B,0x00000000
-	.long	0x3FFF0000,0x87952ECF,0xFF8131E7,0x00000000
-	.long	0x3FFF0000,0x89732FD1,0x9557641B,0x00000000
-	.long	0x3FFF0000,0x8B38CAD1,0x01932A35,0x00000000
-	.long	0x3FFF0000,0x8CE7A8D8,0x301EE6B5,0x00000000
-	.long	0x3FFF0000,0x8F46A39E,0x2EAE5281,0x00000000
-	.long	0x3FFF0000,0x922DA7D7,0x91888487,0x00000000
-	.long	0x3FFF0000,0x94D19FCB,0xDEDF5241,0x00000000
-	.long	0x3FFF0000,0x973AB944,0x19D2A08B,0x00000000
-	.long	0x3FFF0000,0x996FF00E,0x08E10B96,0x00000000
-	.long	0x3FFF0000,0x9B773F95,0x12321DA7,0x00000000
-	.long	0x3FFF0000,0x9D55CC32,0x0F935624,0x00000000
-	.long	0x3FFF0000,0x9F100575,0x006CC571,0x00000000
-	.long	0x3FFF0000,0xA0A9C290,0xD97CC06C,0x00000000
-	.long	0x3FFF0000,0xA22659EB,0xEBC0630A,0x00000000
-	.long	0x3FFF0000,0xA388B4AF,0xF6EF0EC9,0x00000000
-	.long	0x3FFF0000,0xA4D35F10,0x61D292C4,0x00000000
-	.long	0x3FFF0000,0xA60895DC,0xFBE3187E,0x00000000
-	.long	0x3FFF0000,0xA72A51DC,0x7367BEAC,0x00000000
-	.long	0x3FFF0000,0xA83A5153,0x0956168F,0x00000000
-	.long	0x3FFF0000,0xA93A2007,0x7539546E,0x00000000
-	.long	0x3FFF0000,0xAA9E7245,0x023B2605,0x00000000
-	.long	0x3FFF0000,0xAC4C84BA,0x6FE4D58F,0x00000000
-	.long	0x3FFF0000,0xADCE4A4A,0x606B9712,0x00000000
-	.long	0x3FFF0000,0xAF2A2DCD,0x8D263C9C,0x00000000
-	.long	0x3FFF0000,0xB0656F81,0xF22265C7,0x00000000
-	.long	0x3FFF0000,0xB1846515,0x0F71496A,0x00000000
-	.long	0x3FFF0000,0xB28AAA15,0x6F9ADA35,0x00000000
-	.long	0x3FFF0000,0xB37B44FF,0x3766B895,0x00000000
-	.long	0x3FFF0000,0xB458C3DC,0xE9630433,0x00000000
-	.long	0x3FFF0000,0xB525529D,0x562246BD,0x00000000
-	.long	0x3FFF0000,0xB5E2CCA9,0x5F9D88CC,0x00000000
-	.long	0x3FFF0000,0xB692CADA,0x7ACA1ADA,0x00000000
-	.long	0x3FFF0000,0xB736AEA7,0xA6925838,0x00000000
-	.long	0x3FFF0000,0xB7CFAB28,0x7E9F7B36,0x00000000
-	.long	0x3FFF0000,0xB85ECC66,0xCB219835,0x00000000
-	.long	0x3FFF0000,0xB8E4FD5A,0x20A593DA,0x00000000
-	.long	0x3FFF0000,0xB99F41F6,0x4AFF9BB5,0x00000000
-	.long	0x3FFF0000,0xBA7F1E17,0x842BBE7B,0x00000000
-	.long	0x3FFF0000,0xBB471285,0x7637E17D,0x00000000
-	.long	0x3FFF0000,0xBBFABE8A,0x4788DF6F,0x00000000
-	.long	0x3FFF0000,0xBC9D0FAD,0x2B689D79,0x00000000
-	.long	0x3FFF0000,0xBD306A39,0x471ECD86,0x00000000
-	.long	0x3FFF0000,0xBDB6C731,0x856AF18A,0x00000000
-	.long	0x3FFF0000,0xBE31CAC5,0x02E80D70,0x00000000
-	.long	0x3FFF0000,0xBEA2D55C,0xE33194E2,0x00000000
-	.long	0x3FFF0000,0xBF0B10B7,0xC03128F0,0x00000000
-	.long	0x3FFF0000,0xBF6B7A18,0xDACB778D,0x00000000
-	.long	0x3FFF0000,0xBFC4EA46,0x63FA18F6,0x00000000
-	.long	0x3FFF0000,0xC0181BDE,0x8B89A454,0x00000000
-	.long	0x3FFF0000,0xC065B066,0xCFBF6439,0x00000000
-	.long	0x3FFF0000,0xC0AE345F,0x56340AE6,0x00000000
-	.long	0x3FFF0000,0xC0F22291,0x9CB9E6A7,0x00000000
-
-	.set	X,FP_SCR1
-	.set	XDCARE,X+2
-	.set	XFRAC,X+4
-	.set	XFRACLO,X+8
-
-	.set	ATANF,FP_SCR2
-	.set	ATANFHI,ATANF+4
-	.set	ATANFLO,ATANF+8
-
-
-	| xref	t_frcinx
-	|xref	t_extdnrm
-
-	.global	satand
-satand:
-|--ENTRY POINT FOR ATAN(X) FOR DENORMALIZED ARGUMENT
-
-	bra		t_extdnrm
-
-	.global	satan
-satan:
-|--ENTRY POINT FOR ATAN(X), HERE X IS FINITE, NON-ZERO, AND NOT NAN'S
-
-	fmovex		(%a0),%fp0	| ...LOAD INPUT
-
-	movel		(%a0),%d0
-	movew		4(%a0),%d0
-	fmovex		%fp0,X(%a6)
-	andil		#0x7FFFFFFF,%d0
-
-	cmpil		#0x3FFB8000,%d0		| ...|X| >= 1/16?
-	bges		ATANOK1
-	bra		ATANSM
-
-ATANOK1:
-	cmpil		#0x4002FFFF,%d0		| ...|X| < 16 ?
-	bles		ATANMAIN
-	bra		ATANBIG
-
-
-|--THE MOST LIKELY CASE, |X| IN [1/16, 16). WE USE TABLE TECHNIQUE
-|--THE IDEA IS ATAN(X) = ATAN(F) + ATAN( [X-F] / [1+XF] ).
-|--SO IF F IS CHOSEN TO BE CLOSE TO X AND ATAN(F) IS STORED IN
-|--A TABLE, ALL WE NEED IS TO APPROXIMATE ATAN(U) WHERE
-|--U = (X-F)/(1+XF) IS SMALL (REMEMBER F IS CLOSE TO X). IT IS
-|--TRUE THAT A DIVIDE IS NOW NEEDED, BUT THE APPROXIMATION FOR
-|--ATAN(U) IS A VERY SHORT POLYNOMIAL AND THE INDEXING TO
-|--FETCH F AND SAVING OF REGISTERS CAN BE ALL HIDED UNDER THE
-|--DIVIDE. IN THE END THIS METHOD IS MUCH FASTER THAN A TRADITIONAL
-|--ONE. NOTE ALSO THAT THE TRADITIONAL SCHEME THAT APPROXIMATE
-|--ATAN(X) DIRECTLY WILL NEED TO USE A RATIONAL APPROXIMATION
-|--(DIVISION NEEDED) ANYWAY BECAUSE A POLYNOMIAL APPROXIMATION
-|--WILL INVOLVE A VERY LONG POLYNOMIAL.
-
-|--NOW WE SEE X AS +-2^K * 1.BBBBBBB....B <- 1. + 63 BITS
-|--WE CHOSE F TO BE +-2^K * 1.BBBB1
-|--THAT IS IT MATCHES THE EXPONENT AND FIRST 5 BITS OF X, THE
-|--SIXTH BITS IS SET TO BE 1. SINCE K = -4, -3, ..., 3, THERE
-|--ARE ONLY 8 TIMES 16 = 2^7 = 128 |F|'S. SINCE ATAN(-|F|) IS
-|-- -ATAN(|F|), WE NEED TO STORE ONLY ATAN(|F|).
-
-ATANMAIN:
-
-	movew		#0x0000,XDCARE(%a6)	| ...CLEAN UP X JUST IN CASE
-	andil		#0xF8000000,XFRAC(%a6)	| ...FIRST 5 BITS
-	oril		#0x04000000,XFRAC(%a6)	| ...SET 6-TH BIT TO 1
-	movel		#0x00000000,XFRACLO(%a6)	| ...LOCATION OF X IS NOW F
-
-	fmovex		%fp0,%fp1			| ...FP1 IS X
-	fmulx		X(%a6),%fp1		| ...FP1 IS X*F, NOTE THAT X*F > 0
-	fsubx		X(%a6),%fp0		| ...FP0 IS X-F
-	fadds		#0x3F800000,%fp1		| ...FP1 IS 1 + X*F
-	fdivx		%fp1,%fp0			| ...FP0 IS U = (X-F)/(1+X*F)
-
-|--WHILE THE DIVISION IS TAKING ITS TIME, WE FETCH ATAN(|F|)
-|--CREATE ATAN(F) AND STORE IT IN ATANF, AND
-|--SAVE REGISTERS FP2.
-
-	movel		%d2,-(%a7)	| ...SAVE d2 TEMPORARILY
-	movel		%d0,%d2		| ...THE EXPO AND 16 BITS OF X
-	andil		#0x00007800,%d0	| ...4 VARYING BITS OF F'S FRACTION
-	andil		#0x7FFF0000,%d2	| ...EXPONENT OF F
-	subil		#0x3FFB0000,%d2	| ...K+4
-	asrl		#1,%d2
-	addl		%d2,%d0		| ...THE 7 BITS IDENTIFYING F
-	asrl		#7,%d0		| ...INDEX INTO TBL OF ATAN(|F|)
-	lea		ATANTBL,%a1
-	addal		%d0,%a1		| ...ADDRESS OF ATAN(|F|)
-	movel		(%a1)+,ATANF(%a6)
-	movel		(%a1)+,ATANFHI(%a6)
-	movel		(%a1)+,ATANFLO(%a6)	| ...ATANF IS NOW ATAN(|F|)
-	movel		X(%a6),%d0		| ...LOAD SIGN AND EXPO. AGAIN
-	andil		#0x80000000,%d0	| ...SIGN(F)
-	orl		%d0,ATANF(%a6)	| ...ATANF IS NOW SIGN(F)*ATAN(|F|)
-	movel		(%a7)+,%d2	| ...RESTORE d2
-
-|--THAT'S ALL I HAVE TO DO FOR NOW,
-|--BUT ALAS, THE DIVIDE IS STILL CRANKING!
-
-|--U IN FP0, WE ARE NOW READY TO COMPUTE ATAN(U) AS
-|--U + A1*U*V*(A2 + V*(A3 + V)), V = U*U
-|--THE POLYNOMIAL MAY LOOK STRANGE, BUT IS NEVERTHELESS CORRECT.
-|--THE NATURAL FORM IS U + U*V*(A1 + V*(A2 + V*A3))
-|--WHAT WE HAVE HERE IS MERELY	A1 = A3, A2 = A1/A3, A3 = A2/A3.
-|--THE REASON FOR THIS REARRANGEMENT IS TO MAKE THE INDEPENDENT
-|--PARTS A1*U*V AND (A2 + ... STUFF) MORE LOAD-BALANCED
-
-
-	fmovex		%fp0,%fp1
-	fmulx		%fp1,%fp1
-	fmoved		ATANA3,%fp2
-	faddx		%fp1,%fp2		| ...A3+V
-	fmulx		%fp1,%fp2		| ...V*(A3+V)
-	fmulx		%fp0,%fp1		| ...U*V
-	faddd		ATANA2,%fp2	| ...A2+V*(A3+V)
-	fmuld		ATANA1,%fp1	| ...A1*U*V
-	fmulx		%fp2,%fp1		| ...A1*U*V*(A2+V*(A3+V))
-
-	faddx		%fp1,%fp0		| ...ATAN(U), FP1 RELEASED
-	fmovel		%d1,%FPCR		|restore users exceptions
-	faddx		ATANF(%a6),%fp0	| ...ATAN(X)
-	bra		t_frcinx
-
-ATANBORS:
-|--|X| IS IN d0 IN COMPACT FORM. FP1, d0 SAVED.
-|--FP0 IS X AND |X| <= 1/16 OR |X| >= 16.
-	cmpil		#0x3FFF8000,%d0
-	bgt		ATANBIG	| ...I.E. |X| >= 16
-
-ATANSM:
-|--|X| <= 1/16
-|--IF |X| < 2^(-40), RETURN X AS ANSWER. OTHERWISE, APPROXIMATE
-|--ATAN(X) BY X + X*Y*(B1+Y*(B2+Y*(B3+Y*(B4+Y*(B5+Y*B6)))))
-|--WHICH IS X + X*Y*( [B1+Z*(B3+Z*B5)] + [Y*(B2+Z*(B4+Z*B6)] )
-|--WHERE Y = X*X, AND Z = Y*Y.
-
-	cmpil		#0x3FD78000,%d0
-	blt		ATANTINY
-|--COMPUTE POLYNOMIAL
-	fmulx		%fp0,%fp0	| ...FP0 IS Y = X*X
-
-
-	movew		#0x0000,XDCARE(%a6)
-
-	fmovex		%fp0,%fp1
-	fmulx		%fp1,%fp1		| ...FP1 IS Z = Y*Y
-
-	fmoved		ATANB6,%fp2
-	fmoved		ATANB5,%fp3
-
-	fmulx		%fp1,%fp2		| ...Z*B6
-	fmulx		%fp1,%fp3		| ...Z*B5
-
-	faddd		ATANB4,%fp2	| ...B4+Z*B6
-	faddd		ATANB3,%fp3	| ...B3+Z*B5
-
-	fmulx		%fp1,%fp2		| ...Z*(B4+Z*B6)
-	fmulx		%fp3,%fp1		| ...Z*(B3+Z*B5)
-
-	faddd		ATANB2,%fp2	| ...B2+Z*(B4+Z*B6)
-	faddd		ATANB1,%fp1	| ...B1+Z*(B3+Z*B5)
-
-	fmulx		%fp0,%fp2		| ...Y*(B2+Z*(B4+Z*B6))
-	fmulx		X(%a6),%fp0		| ...X*Y
-
-	faddx		%fp2,%fp1		| ...[B1+Z*(B3+Z*B5)]+[Y*(B2+Z*(B4+Z*B6))]
-
-
-	fmulx		%fp1,%fp0	| ...X*Y*([B1+Z*(B3+Z*B5)]+[Y*(B2+Z*(B4+Z*B6))])
-
-	fmovel		%d1,%FPCR		|restore users exceptions
-	faddx		X(%a6),%fp0
-
-	bra		t_frcinx
-
-ATANTINY:
-|--|X| < 2^(-40), ATAN(X) = X
-	movew		#0x0000,XDCARE(%a6)
-
-	fmovel		%d1,%FPCR		|restore users exceptions
-	fmovex		X(%a6),%fp0	|last inst - possible exception set
-
-	bra		t_frcinx
-
-ATANBIG:
-|--IF |X| > 2^(100), RETURN	SIGN(X)*(PI/2 - TINY). OTHERWISE,
-|--RETURN SIGN(X)*PI/2 + ATAN(-1/X).
-	cmpil		#0x40638000,%d0
-	bgt		ATANHUGE
-
-|--APPROXIMATE ATAN(-1/X) BY
-|--X'+X'*Y*(C1+Y*(C2+Y*(C3+Y*(C4+Y*C5)))), X' = -1/X, Y = X'*X'
-|--THIS CAN BE RE-WRITTEN AS
-|--X'+X'*Y*( [C1+Z*(C3+Z*C5)] + [Y*(C2+Z*C4)] ), Z = Y*Y.
-
-	fmoves		#0xBF800000,%fp1	| ...LOAD -1
-	fdivx		%fp0,%fp1		| ...FP1 IS -1/X
-
-
-|--DIVIDE IS STILL CRANKING
-
-	fmovex		%fp1,%fp0		| ...FP0 IS X'
-	fmulx		%fp0,%fp0		| ...FP0 IS Y = X'*X'
-	fmovex		%fp1,X(%a6)		| ...X IS REALLY X'
-
-	fmovex		%fp0,%fp1
-	fmulx		%fp1,%fp1		| ...FP1 IS Z = Y*Y
-
-	fmoved		ATANC5,%fp3
-	fmoved		ATANC4,%fp2
-
-	fmulx		%fp1,%fp3		| ...Z*C5
-	fmulx		%fp1,%fp2		| ...Z*B4
-
-	faddd		ATANC3,%fp3	| ...C3+Z*C5
-	faddd		ATANC2,%fp2	| ...C2+Z*C4
-
-	fmulx		%fp3,%fp1		| ...Z*(C3+Z*C5), FP3 RELEASED
-	fmulx		%fp0,%fp2		| ...Y*(C2+Z*C4)
-
-	faddd		ATANC1,%fp1	| ...C1+Z*(C3+Z*C5)
-	fmulx		X(%a6),%fp0		| ...X'*Y
-
-	faddx		%fp2,%fp1		| ...[Y*(C2+Z*C4)]+[C1+Z*(C3+Z*C5)]
-
-
-	fmulx		%fp1,%fp0		| ...X'*Y*([B1+Z*(B3+Z*B5)]
-|					...	+[Y*(B2+Z*(B4+Z*B6))])
-	faddx		X(%a6),%fp0
-
-	fmovel		%d1,%FPCR		|restore users exceptions
-
-	btstb		#7,(%a0)
-	beqs		pos_big
-
-neg_big:
-	faddx		NPIBY2,%fp0
-	bra		t_frcinx
-
-pos_big:
-	faddx		PPIBY2,%fp0
-	bra		t_frcinx
-
-ATANHUGE:
-|--RETURN SIGN(X)*(PIBY2 - TINY) = SIGN(X)*PIBY2 - SIGN(X)*TINY
-	btstb		#7,(%a0)
-	beqs		pos_huge
-
-neg_huge:
-	fmovex		NPIBY2,%fp0
-	fmovel		%d1,%fpcr
-	fsubx		NTINY,%fp0
-	bra		t_frcinx
-
-pos_huge:
-	fmovex		PPIBY2,%fp0
-	fmovel		%d1,%fpcr
-	fsubx		PTINY,%fp0
-	bra		t_frcinx
-
-	|end
diff --git a/ANDROID_3.4.5/arch/m68k/fpsp040/satanh.S b/ANDROID_3.4.5/arch/m68k/fpsp040/satanh.S
deleted file mode 100644
index ba91f77a..00000000
--- a/ANDROID_3.4.5/arch/m68k/fpsp040/satanh.S
+++ /dev/null
@@ -1,103 +0,0 @@
-|
-|	satanh.sa 3.3 12/19/90
-|
-|	The entry point satanh computes the inverse
-|	hyperbolic tangent of
-|	an input argument; satanhd does the same except for denormalized
-|	input.
-|
-|	Input: Double-extended number X in location pointed to
-|		by address register a0.
-|
-|	Output: The value arctanh(X) returned in floating-point register Fp0.
-|
-|	Accuracy and Monotonicity: The returned result is within 3 ulps in
-|		64 significant bit, i.e. within 0.5001 ulp to 53 bits if the
-|		result is subsequently rounded to double precision. The
-|		result is provably monotonic in double precision.
-|
-|	Speed: The program satanh takes approximately 270 cycles.
-|
-|	Algorithm:
-|
-|	ATANH
-|	1. If |X| >= 1, go to 3.
-|
-|	2. (|X| < 1) Calculate atanh(X) by
-|		sgn := sign(X)
-|		y := |X|
-|		z := 2y/(1-y)
-|		atanh(X) := sgn * (1/2) * logp1(z)
-|		Exit.
-|
-|	3. If |X| > 1, go to 5.
-|
-|	4. (|X| = 1) Generate infinity with an appropriate sign and
-|		divide-by-zero by
-|		sgn := sign(X)
-|		atan(X) := sgn / (+0).
-|		Exit.
-|
-|	5. (|X| > 1) Generate an invalid operation by 0 * infinity.
-|		Exit.
-|
-
-|		Copyright (C) Motorola, Inc. 1990
-|			All Rights Reserved
-|
-|       For details on the license for this file, please see the
-|       file, README, in this same directory.
-
-|satanh	idnt	2,1 | Motorola 040 Floating Point Software Package
-
-	|section	8
-
-	|xref	t_dz
-	|xref	t_operr
-	|xref	t_frcinx
-	|xref	t_extdnrm
-	|xref	slognp1
-
-	.global	satanhd
-satanhd:
-|--ATANH(X) = X FOR DENORMALIZED X
-
-	bra		t_extdnrm
-
-	.global	satanh
-satanh:
-	movel		(%a0),%d0
-	movew		4(%a0),%d0
-	andil		#0x7FFFFFFF,%d0
-	cmpil		#0x3FFF8000,%d0
-	bges		ATANHBIG
-
-|--THIS IS THE USUAL CASE, |X| < 1
-|--Y = |X|, Z = 2Y/(1-Y), ATANH(X) = SIGN(X) * (1/2) * LOG1P(Z).
-
-	fabsx		(%a0),%fp0	| ...Y = |X|
-	fmovex		%fp0,%fp1
-	fnegx		%fp1		| ...-Y
-	faddx		%fp0,%fp0		| ...2Y
-	fadds		#0x3F800000,%fp1	| ...1-Y
-	fdivx		%fp1,%fp0		| ...2Y/(1-Y)
-	movel		(%a0),%d0
-	andil		#0x80000000,%d0
-	oril		#0x3F000000,%d0	| ...SIGN(X)*HALF
-	movel		%d0,-(%sp)
-
-	fmovemx	%fp0-%fp0,(%a0)	| ...overwrite input
-	movel		%d1,-(%sp)
-	clrl		%d1
-	bsr		slognp1		| ...LOG1P(Z)
-	fmovel		(%sp)+,%fpcr
-	fmuls		(%sp)+,%fp0
-	bra		t_frcinx
-
-ATANHBIG:
-	fabsx		(%a0),%fp0	| ...|X|
-	fcmps		#0x3F800000,%fp0
-	fbgt		t_operr
-	bra		t_dz
-
-	|end
diff --git a/ANDROID_3.4.5/arch/m68k/fpsp040/scale.S b/ANDROID_3.4.5/arch/m68k/fpsp040/scale.S
deleted file mode 100644
index 04829dd4..00000000
--- a/ANDROID_3.4.5/arch/m68k/fpsp040/scale.S
+++ /dev/null
@@ -1,370 +0,0 @@
-|
-|	scale.sa 3.3 7/30/91
-|
-|	The entry point sSCALE computes the destination operand
-|	scaled by the source operand.  If the absolute value of
-|	the source operand is (>= 2^14) an overflow or underflow
-|	is returned.
-|
-|	The entry point sscale is called from do_func to emulate
-|	the fscale unimplemented instruction.
-|
-|	Input: Double-extended destination operand in FPTEMP,
-|		double-extended source operand in ETEMP.
-|
-|	Output: The function returns scale(X,Y) to fp0.
-|
-|	Modifies: fp0.
-|
-|	Algorithm:
-|
-|		Copyright (C) Motorola, Inc. 1990
-|			All Rights Reserved
-|
-|       For details on the license for this file, please see the
-|       file, README, in this same directory.
-
-|SCALE    idnt    2,1 | Motorola 040 Floating Point Software Package
-
-	|section	8
-
-#include "fpsp.h"
-
-	|xref	t_ovfl2
-	|xref	t_unfl
-	|xref	round
-	|xref	t_resdnrm
-
-SRC_BNDS: .short	0x3fff,0x400c
-
-|
-| This entry point is used by the unimplemented instruction exception
-| handler.
-|
-|
-|
-|	FSCALE
-|
-	.global	sscale
-sscale:
-	fmovel		#0,%fpcr		|clr user enabled exc
-	clrl		%d1
-	movew		FPTEMP(%a6),%d1	|get dest exponent
-	smi		L_SCR1(%a6)	|use L_SCR1 to hold sign
-	andil		#0x7fff,%d1	|strip sign
-	movew		ETEMP(%a6),%d0	|check src bounds
-	andiw		#0x7fff,%d0	|clr sign bit
-	cmp2w		SRC_BNDS,%d0
-	bccs		src_in
-	cmpiw		#0x400c,%d0	|test for too large
-	bge		src_out
-|
-| The source input is below 1, so we check for denormalized numbers
-| and set unfl.
-|
-src_small:
-	moveb		DTAG(%a6),%d0
-	andib		#0xe0,%d0
-	tstb		%d0
-	beqs		no_denorm
-	st		STORE_FLG(%a6)	|dest already contains result
-	orl		#unfl_mask,USER_FPSR(%a6) |set UNFL
-den_done:
-	leal		FPTEMP(%a6),%a0
-	bra		t_resdnrm
-no_denorm:
-	fmovel		USER_FPCR(%a6),%FPCR
-	fmovex		FPTEMP(%a6),%fp0	|simply return dest
-	rts
-
-
-|
-| Source is within 2^14 range.  To perform the int operation,
-| move it to d0.
-|
-src_in:
-	fmovex		ETEMP(%a6),%fp0	|move in src for int
-	fmovel		#rz_mode,%fpcr	|force rz for src conversion
-	fmovel		%fp0,%d0		|int src to d0
-	fmovel		#0,%FPSR		|clr status from above
-	tstw		ETEMP(%a6)	|check src sign
-	blt		src_neg
-|
-| Source is positive.  Add the src to the dest exponent.
-| The result can be denormalized, if src = 0, or overflow,
-| if the result of the add sets a bit in the upper word.
-|
-src_pos:
-	tstw		%d1		|check for denorm
-	beq		dst_dnrm
-	addl		%d0,%d1		|add src to dest exp
-	beqs		denorm		|if zero, result is denorm
-	cmpil		#0x7fff,%d1	|test for overflow
-	bges		ovfl
-	tstb		L_SCR1(%a6)
-	beqs		spos_pos
-	orw		#0x8000,%d1
-spos_pos:
-	movew		%d1,FPTEMP(%a6)	|result in FPTEMP
-	fmovel		USER_FPCR(%a6),%FPCR
-	fmovex		FPTEMP(%a6),%fp0	|write result to fp0
-	rts
-ovfl:
-	tstb		L_SCR1(%a6)
-	beqs		sovl_pos
-	orw		#0x8000,%d1
-sovl_pos:
-	movew		FPTEMP(%a6),ETEMP(%a6)	|result in ETEMP
-	movel		FPTEMP_HI(%a6),ETEMP_HI(%a6)
-	movel		FPTEMP_LO(%a6),ETEMP_LO(%a6)
-	bra		t_ovfl2
-
-denorm:
-	tstb		L_SCR1(%a6)
-	beqs		den_pos
-	orw		#0x8000,%d1
-den_pos:
-	tstl		FPTEMP_HI(%a6)	|check j bit
-	blts		nden_exit	|if set, not denorm
-	movew		%d1,ETEMP(%a6)	|input expected in ETEMP
-	movel		FPTEMP_HI(%a6),ETEMP_HI(%a6)
-	movel		FPTEMP_LO(%a6),ETEMP_LO(%a6)
-	orl		#unfl_bit,USER_FPSR(%a6)	|set unfl
-	leal		ETEMP(%a6),%a0
-	bra		t_resdnrm
-nden_exit:
-	movew		%d1,FPTEMP(%a6)	|result in FPTEMP
-	fmovel		USER_FPCR(%a6),%FPCR
-	fmovex		FPTEMP(%a6),%fp0	|write result to fp0
-	rts
-
-|
-| Source is negative.  Add the src to the dest exponent.
-| (The result exponent will be reduced).  The result can be
-| denormalized.
-|
-src_neg:
-	addl		%d0,%d1		|add src to dest
-	beqs		denorm		|if zero, result is denorm
-	blts		fix_dnrm	|if negative, result is
-|					;needing denormalization
-	tstb		L_SCR1(%a6)
-	beqs		sneg_pos
-	orw		#0x8000,%d1
-sneg_pos:
-	movew		%d1,FPTEMP(%a6)	|result in FPTEMP
-	fmovel		USER_FPCR(%a6),%FPCR
-	fmovex		FPTEMP(%a6),%fp0	|write result to fp0
-	rts
-
-
-|
-| The result exponent is below denorm value.  Test for catastrophic
-| underflow and force zero if true.  If not, try to shift the
-| mantissa right until a zero exponent exists.
-|
-fix_dnrm:
-	cmpiw		#0xffc0,%d1	|lower bound for normalization
-	blt		fix_unfl	|if lower, catastrophic unfl
-	movew		%d1,%d0		|use d0 for exp
-	movel		%d2,-(%a7)	|free d2 for norm
-	movel		FPTEMP_HI(%a6),%d1
-	movel		FPTEMP_LO(%a6),%d2
-	clrl		L_SCR2(%a6)
-fix_loop:
-	addw		#1,%d0		|drive d0 to 0
-	lsrl		#1,%d1		|while shifting the
-	roxrl		#1,%d2		|mantissa to the right
-	bccs		no_carry
-	st		L_SCR2(%a6)	|use L_SCR2 to capture inex
-no_carry:
-	tstw		%d0		|it is finished when
-	blts		fix_loop	|d0 is zero or the mantissa
-	tstb		L_SCR2(%a6)
-	beqs		tst_zero
-	orl		#unfl_inx_mask,USER_FPSR(%a6)
-|					;set unfl, aunfl, ainex
-|
-| Test for zero. If zero, simply use fmove to return +/- zero
-| to the fpu.
-|
-tst_zero:
-	clrw		FPTEMP_EX(%a6)
-	tstb		L_SCR1(%a6)	|test for sign
-	beqs		tst_con
-	orw		#0x8000,FPTEMP_EX(%a6) |set sign bit
-tst_con:
-	movel		%d1,FPTEMP_HI(%a6)
-	movel		%d2,FPTEMP_LO(%a6)
-	movel		(%a7)+,%d2
-	tstl		%d1
-	bnes		not_zero
-	tstl		FPTEMP_LO(%a6)
-	bnes		not_zero
-|
-| Result is zero.  Check for rounding mode to set lsb.  If the
-| mode is rp, and the zero is positive, return smallest denorm.
-| If the mode is rm, and the zero is negative, return smallest
-| negative denorm.
-|
-	btstb		#5,FPCR_MODE(%a6) |test if rm or rp
-	beqs		no_dir
-	btstb		#4,FPCR_MODE(%a6) |check which one
-	beqs		zer_rm
-zer_rp:
-	tstb		L_SCR1(%a6)	|check sign
-	bnes		no_dir		|if set, neg op, no inc
-	movel		#1,FPTEMP_LO(%a6) |set lsb
-	bras		sm_dnrm
-zer_rm:
-	tstb		L_SCR1(%a6)	|check sign
-	beqs		no_dir		|if clr, neg op, no inc
-	movel		#1,FPTEMP_LO(%a6) |set lsb
-	orl		#neg_mask,USER_FPSR(%a6) |set N
-	bras		sm_dnrm
-no_dir:
-	fmovel		USER_FPCR(%a6),%FPCR
-	fmovex		FPTEMP(%a6),%fp0	|use fmove to set cc's
-	rts
-
-|
-| The rounding mode changed the zero to a smallest denorm. Call
-| t_resdnrm with exceptional operand in ETEMP.
-|
-sm_dnrm:
-	movel		FPTEMP_EX(%a6),ETEMP_EX(%a6)
-	movel		FPTEMP_HI(%a6),ETEMP_HI(%a6)
-	movel		FPTEMP_LO(%a6),ETEMP_LO(%a6)
-	leal		ETEMP(%a6),%a0
-	bra		t_resdnrm
-
-|
-| Result is still denormalized.
-|
-not_zero:
-	orl		#unfl_mask,USER_FPSR(%a6) |set unfl
-	tstb		L_SCR1(%a6)	|check for sign
-	beqs		fix_exit
-	orl		#neg_mask,USER_FPSR(%a6) |set N
-fix_exit:
-	bras		sm_dnrm
-
-
-|
-| The result has underflowed to zero. Return zero and set
-| unfl, aunfl, and ainex.
-|
-fix_unfl:
-	orl		#unfl_inx_mask,USER_FPSR(%a6)
-	btstb		#5,FPCR_MODE(%a6) |test if rm or rp
-	beqs		no_dir2
-	btstb		#4,FPCR_MODE(%a6) |check which one
-	beqs		zer_rm2
-zer_rp2:
-	tstb		L_SCR1(%a6)	|check sign
-	bnes		no_dir2		|if set, neg op, no inc
-	clrl		FPTEMP_EX(%a6)
-	clrl		FPTEMP_HI(%a6)
-	movel		#1,FPTEMP_LO(%a6) |set lsb
-	bras		sm_dnrm		|return smallest denorm
-zer_rm2:
-	tstb		L_SCR1(%a6)	|check sign
-	beqs		no_dir2		|if clr, neg op, no inc
-	movew		#0x8000,FPTEMP_EX(%a6)
-	clrl		FPTEMP_HI(%a6)
-	movel		#1,FPTEMP_LO(%a6) |set lsb
-	orl		#neg_mask,USER_FPSR(%a6) |set N
-	bra		sm_dnrm		|return smallest denorm
-
-no_dir2:
-	tstb		L_SCR1(%a6)
-	bges		pos_zero
-neg_zero:
-	clrl		FP_SCR1(%a6)	|clear the exceptional operand
-	clrl		FP_SCR1+4(%a6)	|for gen_except.
-	clrl		FP_SCR1+8(%a6)
-	fmoves		#0x80000000,%fp0
-	rts
-pos_zero:
-	clrl		FP_SCR1(%a6)	|clear the exceptional operand
-	clrl		FP_SCR1+4(%a6)	|for gen_except.
-	clrl		FP_SCR1+8(%a6)
-	fmoves		#0x00000000,%fp0
-	rts
-
-|
-| The destination is a denormalized number.  It must be handled
-| by first shifting the bits in the mantissa until it is normalized,
-| then adding the remainder of the source to the exponent.
-|
-dst_dnrm:
-	moveml		%d2/%d3,-(%a7)
-	movew		FPTEMP_EX(%a6),%d1
-	movel		FPTEMP_HI(%a6),%d2
-	movel		FPTEMP_LO(%a6),%d3
-dst_loop:
-	tstl		%d2		|test for normalized result
-	blts		dst_norm	|exit loop if so
-	tstl		%d0		|otherwise, test shift count
-	beqs		dst_fin		|if zero, shifting is done
-	subil		#1,%d0		|dec src
-	lsll		#1,%d3
-	roxll		#1,%d2
-	bras		dst_loop
-|
-| Destination became normalized.  Simply add the remaining
-| portion of the src to the exponent.
-|
-dst_norm:
-	addw		%d0,%d1		|dst is normalized; add src
-	tstb		L_SCR1(%a6)
-	beqs		dnrm_pos
-	orl		#0x8000,%d1
-dnrm_pos:
-	movemw		%d1,FPTEMP_EX(%a6)
-	moveml		%d2,FPTEMP_HI(%a6)
-	moveml		%d3,FPTEMP_LO(%a6)
-	fmovel		USER_FPCR(%a6),%FPCR
-	fmovex		FPTEMP(%a6),%fp0
-	moveml		(%a7)+,%d2/%d3
-	rts
-
-|
-| Destination remained denormalized.  Call t_excdnrm with
-| exceptional operand in ETEMP.
-|
-dst_fin:
-	tstb		L_SCR1(%a6)	|check for sign
-	beqs		dst_exit
-	orl		#neg_mask,USER_FPSR(%a6) |set N
-	orl		#0x8000,%d1
-dst_exit:
-	movemw		%d1,ETEMP_EX(%a6)
-	moveml		%d2,ETEMP_HI(%a6)
-	moveml		%d3,ETEMP_LO(%a6)
-	orl		#unfl_mask,USER_FPSR(%a6) |set unfl
-	moveml		(%a7)+,%d2/%d3
-	leal		ETEMP(%a6),%a0
-	bra		t_resdnrm
-
-|
-| Source is outside of 2^14 range.  Test the sign and branch
-| to the appropriate exception handler.
-|
-src_out:
-	tstb		L_SCR1(%a6)
-	beqs		scro_pos
-	orl		#0x8000,%d1
-scro_pos:
-	movel		FPTEMP_HI(%a6),ETEMP_HI(%a6)
-	movel		FPTEMP_LO(%a6),ETEMP_LO(%a6)
-	tstw		ETEMP(%a6)
-	blts		res_neg
-res_pos:
-	movew		%d1,ETEMP(%a6)	|result in ETEMP
-	bra		t_ovfl2
-res_neg:
-	movew		%d1,ETEMP(%a6)	|result in ETEMP
-	leal		ETEMP(%a6),%a0
-	bra		t_unfl
-	|end
diff --git a/ANDROID_3.4.5/arch/m68k/fpsp040/scosh.S b/ANDROID_3.4.5/arch/m68k/fpsp040/scosh.S
deleted file mode 100644
index 07d3a4d7..00000000
--- a/ANDROID_3.4.5/arch/m68k/fpsp040/scosh.S
+++ /dev/null
@@ -1,131 +0,0 @@
-|
-|	scosh.sa 3.1 12/10/90
-|
-|	The entry point sCosh computes the hyperbolic cosine of
-|	an input argument; sCoshd does the same except for denormalized
-|	input.
-|
-|	Input: Double-extended number X in location pointed to
-|		by address register a0.
-|
-|	Output: The value cosh(X) returned in floating-point register Fp0.
-|
-|	Accuracy and Monotonicity: The returned result is within 3 ulps in
-|		64 significant bit, i.e. within 0.5001 ulp to 53 bits if the
-|		result is subsequently rounded to double precision. The
-|		result is provably monotonic in double precision.
-|
-|	Speed: The program sCOSH takes approximately 250 cycles.
-|
-|	Algorithm:
-|
-|	COSH
-|	1. If |X| > 16380 log2, go to 3.
-|
-|	2. (|X| <= 16380 log2) Cosh(X) is obtained by the formulae
-|		y = |X|, z = exp(Y), and
-|		cosh(X) = (1/2)*( z + 1/z ).
-|		Exit.
-|
-|	3. (|X| > 16380 log2). If |X| > 16480 log2, go to 5.
-|
-|	4. (16380 log2 < |X| <= 16480 log2)
-|		cosh(X) = sign(X) * exp(|X|)/2.
-|		However, invoking exp(|X|) may cause premature overflow.
-|		Thus, we calculate sinh(X) as follows:
-|		Y	:= |X|
-|		Fact	:=	2**(16380)
-|		Y'	:= Y - 16381 log2
-|		cosh(X) := Fact * exp(Y').
-|		Exit.
-|
-|	5. (|X| > 16480 log2) sinh(X) must overflow. Return
-|		Huge*Huge to generate overflow and an infinity with
-|		the appropriate sign. Huge is the largest finite number in
-|		extended format. Exit.
-|
-|
-
-|		Copyright (C) Motorola, Inc. 1990
-|			All Rights Reserved
-|
-|       For details on the license for this file, please see the
-|       file, README, in this same directory.
-
-|SCOSH	idnt	2,1 | Motorola 040 Floating Point Software Package
-
-	|section	8
-
-	|xref	t_ovfl
-	|xref	t_frcinx
-	|xref	setox
-
-T1:	.long 0x40C62D38,0xD3D64634 | ... 16381 LOG2 LEAD
-T2:	.long 0x3D6F90AE,0xB1E75CC7 | ... 16381 LOG2 TRAIL
-
-TWO16380: .long 0x7FFB0000,0x80000000,0x00000000,0x00000000
-
-	.global	scoshd
-scoshd:
-|--COSH(X) = 1 FOR DENORMALIZED X
-
-	fmoves		#0x3F800000,%fp0
-
-	fmovel		%d1,%FPCR
-	fadds		#0x00800000,%fp0
-	bra		t_frcinx
-
-	.global	scosh
-scosh:
-	fmovex		(%a0),%fp0	| ...LOAD INPUT
-
-	movel		(%a0),%d0
-	movew		4(%a0),%d0
-	andil		#0x7FFFFFFF,%d0
-	cmpil		#0x400CB167,%d0
-	bgts		COSHBIG
-
-|--THIS IS THE USUAL CASE, |X| < 16380 LOG2
-|--COSH(X) = (1/2) * ( EXP(X) + 1/EXP(X) )
-
-	fabsx		%fp0		| ...|X|
-
-	movel		%d1,-(%sp)
-	clrl		%d1
-	fmovemx	%fp0-%fp0,(%a0)	|pass parameter to setox
-	bsr		setox		| ...FP0 IS EXP(|X|)
-	fmuls		#0x3F000000,%fp0	| ...(1/2)EXP(|X|)
-	movel		(%sp)+,%d1
-
-	fmoves		#0x3E800000,%fp1	| ...(1/4)
-	fdivx		%fp0,%fp1		| ...1/(2 EXP(|X|))
-
-	fmovel		%d1,%FPCR
-	faddx		%fp1,%fp0
-
-	bra		t_frcinx
-
-COSHBIG:
-	cmpil		#0x400CB2B3,%d0
-	bgts		COSHHUGE
-
-	fabsx		%fp0
-	fsubd		T1(%pc),%fp0		| ...(|X|-16381LOG2_LEAD)
-	fsubd		T2(%pc),%fp0		| ...|X| - 16381 LOG2, ACCURATE
-
-	movel		%d1,-(%sp)
-	clrl		%d1
-	fmovemx	%fp0-%fp0,(%a0)
-	bsr		setox
-	fmovel		(%sp)+,%fpcr
-
-	fmulx		TWO16380(%pc),%fp0
-	bra		t_frcinx
-
-COSHHUGE:
-	fmovel		#0,%fpsr		|clr N bit if set by source
-	bclrb		#7,(%a0)		|always return positive value
-	fmovemx	(%a0),%fp0-%fp0
-	bra		t_ovfl
-
-	|end
diff --git a/ANDROID_3.4.5/arch/m68k/fpsp040/setox.S b/ANDROID_3.4.5/arch/m68k/fpsp040/setox.S
deleted file mode 100644
index f1acf7e3..00000000
--- a/ANDROID_3.4.5/arch/m68k/fpsp040/setox.S
+++ /dev/null
@@ -1,864 +0,0 @@
-|
-|	setox.sa 3.1 12/10/90
-|
-|	The entry point setox computes the exponential of a value.
-|	setoxd does the same except the input value is a denormalized
-|	number.	setoxm1 computes exp(X)-1, and setoxm1d computes
-|	exp(X)-1 for denormalized X.
-|
-|	INPUT
-|	-----
-|	Double-extended value in memory location pointed to by address
-|	register a0.
-|
-|	OUTPUT
-|	------
-|	exp(X) or exp(X)-1 returned in floating-point register fp0.
-|
-|	ACCURACY and MONOTONICITY
-|	-------------------------
-|	The returned result is within 0.85 ulps in 64 significant bit, i.e.
-|	within 0.5001 ulp to 53 bits if the result is subsequently rounded
-|	to double precision. The result is provably monotonic in double
-|	precision.
-|
-|	SPEED
-|	-----
-|	Two timings are measured, both in the copy-back mode. The
-|	first one is measured when the function is invoked the first time
-|	(so the instructions and data are not in cache), and the
-|	second one is measured when the function is reinvoked at the same
-|	input argument.
-|
-|	The program setox takes approximately 210/190 cycles for input
-|	argument X whose magnitude is less than 16380 log2, which
-|	is the usual situation.	For the less common arguments,
-|	depending on their values, the program may run faster or slower --
-|	but no worse than 10% slower even in the extreme cases.
-|
-|	The program setoxm1 takes approximately ??? / ??? cycles for input
-|	argument X, 0.25 <= |X| < 70log2. For |X| < 0.25, it takes
-|	approximately ??? / ??? cycles. For the less common arguments,
-|	depending on their values, the program may run faster or slower --
-|	but no worse than 10% slower even in the extreme cases.
-|
-|	ALGORITHM and IMPLEMENTATION NOTES
-|	----------------------------------
-|
-|	setoxd
-|	------
-|	Step 1.	Set ans := 1.0
-|
-|	Step 2.	Return	ans := ans + sign(X)*2^(-126). Exit.
-|	Notes:	This will always generate one exception -- inexact.
-|
-|
-|	setox
-|	-----
-|
-|	Step 1.	Filter out extreme cases of input argument.
-|		1.1	If |X| >= 2^(-65), go to Step 1.3.
-|		1.2	Go to Step 7.
-|		1.3	If |X| < 16380 log(2), go to Step 2.
-|		1.4	Go to Step 8.
-|	Notes:	The usual case should take the branches 1.1 -> 1.3 -> 2.
-|		 To avoid the use of floating-point comparisons, a
-|		 compact representation of |X| is used. This format is a
-|		 32-bit integer, the upper (more significant) 16 bits are
-|		 the sign and biased exponent field of |X|; the lower 16
-|		 bits are the 16 most significant fraction (including the
-|		 explicit bit) bits of |X|. Consequently, the comparisons
-|		 in Steps 1.1 and 1.3 can be performed by integer comparison.
-|		 Note also that the constant 16380 log(2) used in Step 1.3
-|		 is also in the compact form. Thus taking the branch
-|		 to Step 2 guarantees |X| < 16380 log(2). There is no harm
-|		 to have a small number of cases where |X| is less than,
-|		 but close to, 16380 log(2) and the branch to Step 9 is
-|		 taken.
-|
-|	Step 2.	Calculate N = round-to-nearest-int( X * 64/log2 ).
-|		2.1	Set AdjFlag := 0 (indicates the branch 1.3 -> 2 was taken)
-|		2.2	N := round-to-nearest-integer( X * 64/log2 ).
-|		2.3	Calculate	J = N mod 64; so J = 0,1,2,..., or 63.
-|		2.4	Calculate	M = (N - J)/64; so N = 64M + J.
-|		2.5	Calculate the address of the stored value of 2^(J/64).
-|		2.6	Create the value Scale = 2^M.
-|	Notes:	The calculation in 2.2 is really performed by
-|
-|			Z := X * constant
-|			N := round-to-nearest-integer(Z)
-|
-|		 where
-|
-|			constant := single-precision( 64/log 2 ).
-|
-|		 Using a single-precision constant avoids memory access.
-|		 Another effect of using a single-precision "constant" is
-|		 that the calculated value Z is
-|
-|			Z = X*(64/log2)*(1+eps), |eps| <= 2^(-24).
-|
-|		 This error has to be considered later in Steps 3 and 4.
-|
-|	Step 3.	Calculate X - N*log2/64.
-|		3.1	R := X + N*L1, where L1 := single-precision(-log2/64).
-|		3.2	R := R + N*L2, L2 := extended-precision(-log2/64 - L1).
-|	Notes:	a) The way L1 and L2 are chosen ensures L1+L2 approximate
-|		 the value	-log2/64	to 88 bits of accuracy.
-|		 b) N*L1 is exact because N is no longer than 22 bits and
-|		 L1 is no longer than 24 bits.
-|		 c) The calculation X+N*L1 is also exact due to cancellation.
-|		 Thus, R is practically X+N(L1+L2) to full 64 bits.
-|		 d) It is important to estimate how large can |R| be after
-|		 Step 3.2.
-|
-|			N = rnd-to-int( X*64/log2 (1+eps) ), |eps|<=2^(-24)
-|			X*64/log2 (1+eps)	=	N + f,	|f| <= 0.5
-|			X*64/log2 - N	=	f - eps*X 64/log2
-|			X - N*log2/64	=	f*log2/64 - eps*X
-|
-|
-|		 Now |X| <= 16446 log2, thus
-|
-|			|X - N*log2/64| <= (0.5 + 16446/2^(18))*log2/64
-|					<= 0.57 log2/64.
-|		 This bound will be used in Step 4.
-|
-|	Step 4.	Approximate exp(R)-1 by a polynomial
-|			p = R + R*R*(A1 + R*(A2 + R*(A3 + R*(A4 + R*A5))))
-|	Notes:	a) In order to reduce memory access, the coefficients are
-|		 made as "short" as possible: A1 (which is 1/2), A4 and A5
-|		 are single precision; A2 and A3 are double precision.
-|		 b) Even with the restrictions above,
-|			|p - (exp(R)-1)| < 2^(-68.8) for all |R| <= 0.0062.
-|		 Note that 0.0062 is slightly bigger than 0.57 log2/64.
-|		 c) To fully utilize the pipeline, p is separated into
-|		 two independent pieces of roughly equal complexities
-|			p = [ R + R*S*(A2 + S*A4) ]	+
-|				[ S*(A1 + S*(A3 + S*A5)) ]
-|		 where S = R*R.
-|
-|	Step 5.	Compute 2^(J/64)*exp(R) = 2^(J/64)*(1+p) by
-|				ans := T + ( T*p + t)
-|		 where T and t are the stored values for 2^(J/64).
-|	Notes:	2^(J/64) is stored as T and t where T+t approximates
-|		 2^(J/64) to roughly 85 bits; T is in extended precision
-|		 and t is in single precision. Note also that T is rounded
-|		 to 62 bits so that the last two bits of T are zero. The
-|		 reason for such a special form is that T-1, T-2, and T-8
-|		 will all be exact --- a property that will give much
-|		 more accurate computation of the function EXPM1.
-|
-|	Step 6.	Reconstruction of exp(X)
-|			exp(X) = 2^M * 2^(J/64) * exp(R).
-|		6.1	If AdjFlag = 0, go to 6.3
-|		6.2	ans := ans * AdjScale
-|		6.3	Restore the user FPCR
-|		6.4	Return ans := ans * Scale. Exit.
-|	Notes:	If AdjFlag = 0, we have X = Mlog2 + Jlog2/64 + R,
-|		 |M| <= 16380, and Scale = 2^M. Moreover, exp(X) will
-|		 neither overflow nor underflow. If AdjFlag = 1, that
-|		 means that
-|			X = (M1+M)log2 + Jlog2/64 + R, |M1+M| >= 16380.
-|		 Hence, exp(X) may overflow or underflow or neither.
-|		 When that is the case, AdjScale = 2^(M1) where M1 is
-|		 approximately M. Thus 6.2 will never cause over/underflow.
-|		 Possible exception in 6.4 is overflow or underflow.
-|		 The inexact exception is not generated in 6.4. Although
-|		 one can argue that the inexact flag should always be
-|		 raised, to simulate that exception cost to much than the
-|		 flag is worth in practical uses.
-|
-|	Step 7.	Return 1 + X.
-|		7.1	ans := X
-|		7.2	Restore user FPCR.
-|		7.3	Return ans := 1 + ans. Exit
-|	Notes:	For non-zero X, the inexact exception will always be
-|		 raised by 7.3. That is the only exception raised by 7.3.
-|		 Note also that we use the FMOVEM instruction to move X
-|		 in Step 7.1 to avoid unnecessary trapping. (Although
-|		 the FMOVEM may not seem relevant since X is normalized,
-|		 the precaution will be useful in the library version of
-|		 this code where the separate entry for denormalized inputs
-|		 will be done away with.)
-|
-|	Step 8.	Handle exp(X) where |X| >= 16380log2.
-|		8.1	If |X| > 16480 log2, go to Step 9.
-|		(mimic 2.2 - 2.6)
-|		8.2	N := round-to-integer( X * 64/log2 )
-|		8.3	Calculate J = N mod 64, J = 0,1,...,63
-|		8.4	K := (N-J)/64, M1 := truncate(K/2), M = K-M1, AdjFlag := 1.
-|		8.5	Calculate the address of the stored value 2^(J/64).
-|		8.6	Create the values Scale = 2^M, AdjScale = 2^M1.
-|		8.7	Go to Step 3.
-|	Notes:	Refer to notes for 2.2 - 2.6.
-|
-|	Step 9.	Handle exp(X), |X| > 16480 log2.
-|		9.1	If X < 0, go to 9.3
-|		9.2	ans := Huge, go to 9.4
-|		9.3	ans := Tiny.
-|		9.4	Restore user FPCR.
-|		9.5	Return ans := ans * ans. Exit.
-|	Notes:	Exp(X) will surely overflow or underflow, depending on
-|		 X's sign. "Huge" and "Tiny" are respectively large/tiny
-|		 extended-precision numbers whose square over/underflow
-|		 with an inexact result. Thus, 9.5 always raises the
-|		 inexact together with either overflow or underflow.
-|
-|
-|	setoxm1d
-|	--------
-|
-|	Step 1.	Set ans := 0
-|
-|	Step 2.	Return	ans := X + ans. Exit.
-|	Notes:	This will return X with the appropriate rounding
-|		 precision prescribed by the user FPCR.
-|
-|	setoxm1
-|	-------
-|
-|	Step 1.	Check |X|
-|		1.1	If |X| >= 1/4, go to Step 1.3.
-|		1.2	Go to Step 7.
-|		1.3	If |X| < 70 log(2), go to Step 2.
-|		1.4	Go to Step 10.
-|	Notes:	The usual case should take the branches 1.1 -> 1.3 -> 2.
-|		 However, it is conceivable |X| can be small very often
-|		 because EXPM1 is intended to evaluate exp(X)-1 accurately
-|		 when |X| is small. For further details on the comparisons,
-|		 see the notes on Step 1 of setox.
-|
-|	Step 2.	Calculate N = round-to-nearest-int( X * 64/log2 ).
-|		2.1	N := round-to-nearest-integer( X * 64/log2 ).
-|		2.2	Calculate	J = N mod 64; so J = 0,1,2,..., or 63.
-|		2.3	Calculate	M = (N - J)/64; so N = 64M + J.
-|		2.4	Calculate the address of the stored value of 2^(J/64).
-|		2.5	Create the values Sc = 2^M and OnebySc := -2^(-M).
-|	Notes:	See the notes on Step 2 of setox.
-|
-|	Step 3.	Calculate X - N*log2/64.
-|		3.1	R := X + N*L1, where L1 := single-precision(-log2/64).
-|		3.2	R := R + N*L2, L2 := extended-precision(-log2/64 - L1).
-|	Notes:	Applying the analysis of Step 3 of setox in this case
-|		 shows that |R| <= 0.0055 (note that |X| <= 70 log2 in
-|		 this case).
-|
-|	Step 4.	Approximate exp(R)-1 by a polynomial
-|			p = R+R*R*(A1+R*(A2+R*(A3+R*(A4+R*(A5+R*A6)))))
-|	Notes:	a) In order to reduce memory access, the coefficients are
-|		 made as "short" as possible: A1 (which is 1/2), A5 and A6
-|		 are single precision; A2, A3 and A4 are double precision.
-|		 b) Even with the restriction above,
-|			|p - (exp(R)-1)| <	|R| * 2^(-72.7)
-|		 for all |R| <= 0.0055.
-|		 c) To fully utilize the pipeline, p is separated into
-|		 two independent pieces of roughly equal complexity
-|			p = [ R*S*(A2 + S*(A4 + S*A6)) ]	+
-|				[ R + S*(A1 + S*(A3 + S*A5)) ]
-|		 where S = R*R.
-|
-|	Step 5.	Compute 2^(J/64)*p by
-|				p := T*p
-|		 where T and t are the stored values for 2^(J/64).
-|	Notes:	2^(J/64) is stored as T and t where T+t approximates
-|		 2^(J/64) to roughly 85 bits; T is in extended precision
-|		 and t is in single precision. Note also that T is rounded
-|		 to 62 bits so that the last two bits of T are zero. The
-|		 reason for such a special form is that T-1, T-2, and T-8
-|		 will all be exact --- a property that will be exploited
-|		 in Step 6 below. The total relative error in p is no
-|		 bigger than 2^(-67.7) compared to the final result.
-|
-|	Step 6.	Reconstruction of exp(X)-1
-|			exp(X)-1 = 2^M * ( 2^(J/64) + p - 2^(-M) ).
-|		6.1	If M <= 63, go to Step 6.3.
-|		6.2	ans := T + (p + (t + OnebySc)). Go to 6.6
-|		6.3	If M >= -3, go to 6.5.
-|		6.4	ans := (T + (p + t)) + OnebySc. Go to 6.6
-|		6.5	ans := (T + OnebySc) + (p + t).
-|		6.6	Restore user FPCR.
-|		6.7	Return ans := Sc * ans. Exit.
-|	Notes:	The various arrangements of the expressions give accurate
-|		 evaluations.
-|
-|	Step 7.	exp(X)-1 for |X| < 1/4.
-|		7.1	If |X| >= 2^(-65), go to Step 9.
-|		7.2	Go to Step 8.
-|
-|	Step 8.	Calculate exp(X)-1, |X| < 2^(-65).
-|		8.1	If |X| < 2^(-16312), goto 8.3
-|		8.2	Restore FPCR; return ans := X - 2^(-16382). Exit.
-|		8.3	X := X * 2^(140).
-|		8.4	Restore FPCR; ans := ans - 2^(-16382).
-|		 Return ans := ans*2^(140). Exit
-|	Notes:	The idea is to return "X - tiny" under the user
-|		 precision and rounding modes. To avoid unnecessary
-|		 inefficiency, we stay away from denormalized numbers the
-|		 best we can. For |X| >= 2^(-16312), the straightforward
-|		 8.2 generates the inexact exception as the case warrants.
-|
-|	Step 9.	Calculate exp(X)-1, |X| < 1/4, by a polynomial
-|			p = X + X*X*(B1 + X*(B2 + ... + X*B12))
-|	Notes:	a) In order to reduce memory access, the coefficients are
-|		 made as "short" as possible: B1 (which is 1/2), B9 to B12
-|		 are single precision; B3 to B8 are double precision; and
-|		 B2 is double extended.
-|		 b) Even with the restriction above,
-|			|p - (exp(X)-1)| < |X| 2^(-70.6)
-|		 for all |X| <= 0.251.
-|		 Note that 0.251 is slightly bigger than 1/4.
-|		 c) To fully preserve accuracy, the polynomial is computed
-|		 as	X + ( S*B1 +	Q ) where S = X*X and
-|			Q	=	X*S*(B2 + X*(B3 + ... + X*B12))
-|		 d) To fully utilize the pipeline, Q is separated into
-|		 two independent pieces of roughly equal complexity
-|			Q = [ X*S*(B2 + S*(B4 + ... + S*B12)) ] +
-|				[ S*S*(B3 + S*(B5 + ... + S*B11)) ]
-|
-|	Step 10.	Calculate exp(X)-1 for |X| >= 70 log 2.
-|		10.1 If X >= 70log2 , exp(X) - 1 = exp(X) for all practical
-|		 purposes. Therefore, go to Step 1 of setox.
-|		10.2 If X <= -70log2, exp(X) - 1 = -1 for all practical purposes.
-|		 ans := -1
-|		 Restore user FPCR
-|		 Return ans := ans + 2^(-126). Exit.
-|	Notes:	10.2 will always create an inexact and return -1 + tiny
-|		 in the user rounding precision and mode.
-|
-|
-
-|		Copyright (C) Motorola, Inc. 1990
-|			All Rights Reserved
-|
-|       For details on the license for this file, please see the
-|       file, README, in this same directory.
-
-|setox	idnt	2,1 | Motorola 040 Floating Point Software Package
-
-	|section	8
-
-#include "fpsp.h"
-
-L2:	.long	0x3FDC0000,0x82E30865,0x4361C4C6,0x00000000
-
-EXPA3:	.long	0x3FA55555,0x55554431
-EXPA2:	.long	0x3FC55555,0x55554018
-
-HUGE:	.long	0x7FFE0000,0xFFFFFFFF,0xFFFFFFFF,0x00000000
-TINY:	.long	0x00010000,0xFFFFFFFF,0xFFFFFFFF,0x00000000
-
-EM1A4:	.long	0x3F811111,0x11174385
-EM1A3:	.long	0x3FA55555,0x55554F5A
-
-EM1A2:	.long	0x3FC55555,0x55555555,0x00000000,0x00000000
-
-EM1B8:	.long	0x3EC71DE3,0xA5774682
-EM1B7:	.long	0x3EFA01A0,0x19D7CB68
-
-EM1B6:	.long	0x3F2A01A0,0x1A019DF3
-EM1B5:	.long	0x3F56C16C,0x16C170E2
-
-EM1B4:	.long	0x3F811111,0x11111111
-EM1B3:	.long	0x3FA55555,0x55555555
-
-EM1B2:	.long	0x3FFC0000,0xAAAAAAAA,0xAAAAAAAB
-	.long	0x00000000
-
-TWO140:	.long	0x48B00000,0x00000000
-TWON140:	.long	0x37300000,0x00000000
-
-EXPTBL:
-	.long	0x3FFF0000,0x80000000,0x00000000,0x00000000
-	.long	0x3FFF0000,0x8164D1F3,0xBC030774,0x9F841A9B
-	.long	0x3FFF0000,0x82CD8698,0xAC2BA1D8,0x9FC1D5B9
-	.long	0x3FFF0000,0x843A28C3,0xACDE4048,0xA0728369
-	.long	0x3FFF0000,0x85AAC367,0xCC487B14,0x1FC5C95C
-	.long	0x3FFF0000,0x871F6196,0x9E8D1010,0x1EE85C9F
-	.long	0x3FFF0000,0x88980E80,0x92DA8528,0x9FA20729
-	.long	0x3FFF0000,0x8A14D575,0x496EFD9C,0xA07BF9AF
-	.long	0x3FFF0000,0x8B95C1E3,0xEA8BD6E8,0xA0020DCF
-	.long	0x3FFF0000,0x8D1ADF5B,0x7E5BA9E4,0x205A63DA
-	.long	0x3FFF0000,0x8EA4398B,0x45CD53C0,0x1EB70051
-	.long	0x3FFF0000,0x9031DC43,0x1466B1DC,0x1F6EB029
-	.long	0x3FFF0000,0x91C3D373,0xAB11C338,0xA0781494
-	.long	0x3FFF0000,0x935A2B2F,0x13E6E92C,0x9EB319B0
-	.long	0x3FFF0000,0x94F4EFA8,0xFEF70960,0x2017457D
-	.long	0x3FFF0000,0x96942D37,0x20185A00,0x1F11D537
-	.long	0x3FFF0000,0x9837F051,0x8DB8A970,0x9FB952DD
-	.long	0x3FFF0000,0x99E04593,0x20B7FA64,0x1FE43087
-	.long	0x3FFF0000,0x9B8D39B9,0xD54E5538,0x1FA2A818
-	.long	0x3FFF0000,0x9D3ED9A7,0x2CFFB750,0x1FDE494D
-	.long	0x3FFF0000,0x9EF53260,0x91A111AC,0x20504890
-	.long	0x3FFF0000,0xA0B0510F,0xB9714FC4,0xA073691C
-	.long	0x3FFF0000,0xA2704303,0x0C496818,0x1F9B7A05
-	.long	0x3FFF0000,0xA43515AE,0x09E680A0,0xA0797126
-	.long	0x3FFF0000,0xA5FED6A9,0xB15138EC,0xA071A140
-	.long	0x3FFF0000,0xA7CD93B4,0xE9653568,0x204F62DA
-	.long	0x3FFF0000,0xA9A15AB4,0xEA7C0EF8,0x1F283C4A
-	.long	0x3FFF0000,0xAB7A39B5,0xA93ED338,0x9F9A7FDC
-	.long	0x3FFF0000,0xAD583EEA,0x42A14AC8,0xA05B3FAC
-	.long	0x3FFF0000,0xAF3B78AD,0x690A4374,0x1FDF2610
-	.long	0x3FFF0000,0xB123F581,0xD2AC2590,0x9F705F90
-	.long	0x3FFF0000,0xB311C412,0xA9112488,0x201F678A
-	.long	0x3FFF0000,0xB504F333,0xF9DE6484,0x1F32FB13
-	.long	0x3FFF0000,0xB6FD91E3,0x28D17790,0x20038B30
-	.long	0x3FFF0000,0xB8FBAF47,0x62FB9EE8,0x200DC3CC
-	.long	0x3FFF0000,0xBAFF5AB2,0x133E45FC,0x9F8B2AE6
-	.long	0x3FFF0000,0xBD08A39F,0x580C36C0,0xA02BBF70
-	.long	0x3FFF0000,0xBF1799B6,0x7A731084,0xA00BF518
-	.long	0x3FFF0000,0xC12C4CCA,0x66709458,0xA041DD41
-	.long	0x3FFF0000,0xC346CCDA,0x24976408,0x9FDF137B
-	.long	0x3FFF0000,0xC5672A11,0x5506DADC,0x201F1568
-	.long	0x3FFF0000,0xC78D74C8,0xABB9B15C,0x1FC13A2E
-	.long	0x3FFF0000,0xC9B9BD86,0x6E2F27A4,0xA03F8F03
-	.long	0x3FFF0000,0xCBEC14FE,0xF2727C5C,0x1FF4907D
-	.long	0x3FFF0000,0xCE248C15,0x1F8480E4,0x9E6E53E4
-	.long	0x3FFF0000,0xD06333DA,0xEF2B2594,0x1FD6D45C
-	.long	0x3FFF0000,0xD2A81D91,0xF12AE45C,0xA076EDB9
-	.long	0x3FFF0000,0xD4F35AAB,0xCFEDFA20,0x9FA6DE21
-	.long	0x3FFF0000,0xD744FCCA,0xD69D6AF4,0x1EE69A2F
-	.long	0x3FFF0000,0xD99D15C2,0x78AFD7B4,0x207F439F
-	.long	0x3FFF0000,0xDBFBB797,0xDAF23754,0x201EC207
-	.long	0x3FFF0000,0xDE60F482,0x5E0E9124,0x9E8BE175
-	.long	0x3FFF0000,0xE0CCDEEC,0x2A94E110,0x20032C4B
-	.long	0x3FFF0000,0xE33F8972,0xBE8A5A50,0x2004DFF5
-	.long	0x3FFF0000,0xE5B906E7,0x7C8348A8,0x1E72F47A
-	.long	0x3FFF0000,0xE8396A50,0x3C4BDC68,0x1F722F22
-	.long	0x3FFF0000,0xEAC0C6E7,0xDD243930,0xA017E945
-	.long	0x3FFF0000,0xED4F301E,0xD9942B84,0x1F401A5B
-	.long	0x3FFF0000,0xEFE4B99B,0xDCDAF5CC,0x9FB9A9E3
-	.long	0x3FFF0000,0xF281773C,0x59FFB138,0x20744C05
-	.long	0x3FFF0000,0xF5257D15,0x2486CC2C,0x1F773A19
-	.long	0x3FFF0000,0xF7D0DF73,0x0AD13BB8,0x1FFE90D5
-	.long	0x3FFF0000,0xFA83B2DB,0x722A033C,0xA041ED22
-	.long	0x3FFF0000,0xFD3E0C0C,0xF486C174,0x1F853F3A
-
-	.set	ADJFLAG,L_SCR2
-	.set	SCALE,FP_SCR1
-	.set	ADJSCALE,FP_SCR2
-	.set	SC,FP_SCR3
-	.set	ONEBYSC,FP_SCR4
-
-	| xref	t_frcinx
-	|xref	t_extdnrm
-	|xref	t_unfl
-	|xref	t_ovfl
-
-	.global	setoxd
-setoxd:
-|--entry point for EXP(X), X is denormalized
-	movel		(%a0),%d0
-	andil		#0x80000000,%d0
-	oril		#0x00800000,%d0		| ...sign(X)*2^(-126)
-	movel		%d0,-(%sp)
-	fmoves		#0x3F800000,%fp0
-	fmovel		%d1,%fpcr
-	fadds		(%sp)+,%fp0
-	bra		t_frcinx
-
-	.global	setox
-setox:
-|--entry point for EXP(X), here X is finite, non-zero, and not NaN's
-
-|--Step 1.
-	movel		(%a0),%d0	 | ...load part of input X
-	andil		#0x7FFF0000,%d0	| ...biased expo. of X
-	cmpil		#0x3FBE0000,%d0	| ...2^(-65)
-	bges		EXPC1		| ...normal case
-	bra		EXPSM
-
-EXPC1:
-|--The case |X| >= 2^(-65)
-	movew		4(%a0),%d0	| ...expo. and partial sig. of |X|
-	cmpil		#0x400CB167,%d0	| ...16380 log2 trunc. 16 bits
-	blts		EXPMAIN	 | ...normal case
-	bra		EXPBIG
-
-EXPMAIN:
-|--Step 2.
-|--This is the normal branch:	2^(-65) <= |X| < 16380 log2.
-	fmovex		(%a0),%fp0	| ...load input from (a0)
-
-	fmovex		%fp0,%fp1
-	fmuls		#0x42B8AA3B,%fp0	| ...64/log2 * X
-	fmovemx	%fp2-%fp2/%fp3,-(%a7)		| ...save fp2
-	movel		#0,ADJFLAG(%a6)
-	fmovel		%fp0,%d0		| ...N = int( X * 64/log2 )
-	lea		EXPTBL,%a1
-	fmovel		%d0,%fp0		| ...convert to floating-format
-
-	movel		%d0,L_SCR1(%a6)	| ...save N temporarily
-	andil		#0x3F,%d0		| ...D0 is J = N mod 64
-	lsll		#4,%d0
-	addal		%d0,%a1		| ...address of 2^(J/64)
-	movel		L_SCR1(%a6),%d0
-	asrl		#6,%d0		| ...D0 is M
-	addiw		#0x3FFF,%d0	| ...biased expo. of 2^(M)
-	movew		L2,L_SCR1(%a6)	| ...prefetch L2, no need in CB
-
-EXPCONT1:
-|--Step 3.
-|--fp1,fp2 saved on the stack. fp0 is N, fp1 is X,
-|--a0 points to 2^(J/64), D0 is biased expo. of 2^(M)
-	fmovex		%fp0,%fp2
-	fmuls		#0xBC317218,%fp0	| ...N * L1, L1 = lead(-log2/64)
-	fmulx		L2,%fp2		| ...N * L2, L1+L2 = -log2/64
-	faddx		%fp1,%fp0		| ...X + N*L1
-	faddx		%fp2,%fp0		| ...fp0 is R, reduced arg.
-|	MOVE.W		#$3FA5,EXPA3	...load EXPA3 in cache
-
-|--Step 4.
-|--WE NOW COMPUTE EXP(R)-1 BY A POLYNOMIAL
-|-- R + R*R*(A1 + R*(A2 + R*(A3 + R*(A4 + R*A5))))
-|--TO FULLY UTILIZE THE PIPELINE, WE COMPUTE S = R*R
-|--[R+R*S*(A2+S*A4)] + [S*(A1+S*(A3+S*A5))]
-
-	fmovex		%fp0,%fp1
-	fmulx		%fp1,%fp1		| ...fp1 IS S = R*R
-
-	fmoves		#0x3AB60B70,%fp2	| ...fp2 IS A5
-|	MOVE.W		#0,2(%a1)	...load 2^(J/64) in cache
-
-	fmulx		%fp1,%fp2		| ...fp2 IS S*A5
-	fmovex		%fp1,%fp3
-	fmuls		#0x3C088895,%fp3	| ...fp3 IS S*A4
-
-	faddd		EXPA3,%fp2	| ...fp2 IS A3+S*A5
-	faddd		EXPA2,%fp3	| ...fp3 IS A2+S*A4
-
-	fmulx		%fp1,%fp2		| ...fp2 IS S*(A3+S*A5)
-	movew		%d0,SCALE(%a6)	| ...SCALE is 2^(M) in extended
-	clrw		SCALE+2(%a6)
-	movel		#0x80000000,SCALE+4(%a6)
-	clrl		SCALE+8(%a6)
-
-	fmulx		%fp1,%fp3		| ...fp3 IS S*(A2+S*A4)
-
-	fadds		#0x3F000000,%fp2	| ...fp2 IS A1+S*(A3+S*A5)
-	fmulx		%fp0,%fp3		| ...fp3 IS R*S*(A2+S*A4)
-
-	fmulx		%fp1,%fp2		| ...fp2 IS S*(A1+S*(A3+S*A5))
-	faddx		%fp3,%fp0		| ...fp0 IS R+R*S*(A2+S*A4),
-|					...fp3 released
-
-	fmovex		(%a1)+,%fp1	| ...fp1 is lead. pt. of 2^(J/64)
-	faddx		%fp2,%fp0		| ...fp0 is EXP(R) - 1
-|					...fp2 released
-
-|--Step 5
-|--final reconstruction process
-|--EXP(X) = 2^M * ( 2^(J/64) + 2^(J/64)*(EXP(R)-1) )
-
-	fmulx		%fp1,%fp0		| ...2^(J/64)*(Exp(R)-1)
-	fmovemx	(%a7)+,%fp2-%fp2/%fp3	| ...fp2 restored
-	fadds		(%a1),%fp0	| ...accurate 2^(J/64)
-
-	faddx		%fp1,%fp0		| ...2^(J/64) + 2^(J/64)*...
-	movel		ADJFLAG(%a6),%d0
-
-|--Step 6
-	tstl		%d0
-	beqs		NORMAL
-ADJUST:
-	fmulx		ADJSCALE(%a6),%fp0
-NORMAL:
-	fmovel		%d1,%FPCR		| ...restore user FPCR
-	fmulx		SCALE(%a6),%fp0	| ...multiply 2^(M)
-	bra		t_frcinx
-
-EXPSM:
-|--Step 7
-	fmovemx	(%a0),%fp0-%fp0	| ...in case X is denormalized
-	fmovel		%d1,%FPCR
-	fadds		#0x3F800000,%fp0	| ...1+X in user mode
-	bra		t_frcinx
-
-EXPBIG:
-|--Step 8
-	cmpil		#0x400CB27C,%d0	| ...16480 log2
-	bgts		EXP2BIG
-|--Steps 8.2 -- 8.6
-	fmovex		(%a0),%fp0	| ...load input from (a0)
-
-	fmovex		%fp0,%fp1
-	fmuls		#0x42B8AA3B,%fp0	| ...64/log2 * X
-	fmovemx	 %fp2-%fp2/%fp3,-(%a7)		| ...save fp2
-	movel		#1,ADJFLAG(%a6)
-	fmovel		%fp0,%d0		| ...N = int( X * 64/log2 )
-	lea		EXPTBL,%a1
-	fmovel		%d0,%fp0		| ...convert to floating-format
-	movel		%d0,L_SCR1(%a6)			| ...save N temporarily
-	andil		#0x3F,%d0		 | ...D0 is J = N mod 64
-	lsll		#4,%d0
-	addal		%d0,%a1			| ...address of 2^(J/64)
-	movel		L_SCR1(%a6),%d0
-	asrl		#6,%d0			| ...D0 is K
-	movel		%d0,L_SCR1(%a6)			| ...save K temporarily
-	asrl		#1,%d0			| ...D0 is M1
-	subl		%d0,L_SCR1(%a6)			| ...a1 is M
-	addiw		#0x3FFF,%d0		| ...biased expo. of 2^(M1)
-	movew		%d0,ADJSCALE(%a6)		| ...ADJSCALE := 2^(M1)
-	clrw		ADJSCALE+2(%a6)
-	movel		#0x80000000,ADJSCALE+4(%a6)
-	clrl		ADJSCALE+8(%a6)
-	movel		L_SCR1(%a6),%d0			| ...D0 is M
-	addiw		#0x3FFF,%d0		| ...biased expo. of 2^(M)
-	bra		EXPCONT1		| ...go back to Step 3
-
-EXP2BIG:
-|--Step 9
-	fmovel		%d1,%FPCR
-	movel		(%a0),%d0
-	bclrb		#sign_bit,(%a0)		| ...setox always returns positive
-	cmpil		#0,%d0
-	blt		t_unfl
-	bra		t_ovfl
-
-	.global	setoxm1d
-setoxm1d:
-|--entry point for EXPM1(X), here X is denormalized
-|--Step 0.
-	bra		t_extdnrm
-
-
-	.global	setoxm1
-setoxm1:
-|--entry point for EXPM1(X), here X is finite, non-zero, non-NaN
-
-|--Step 1.
-|--Step 1.1
-	movel		(%a0),%d0	 | ...load part of input X
-	andil		#0x7FFF0000,%d0	| ...biased expo. of X
-	cmpil		#0x3FFD0000,%d0	| ...1/4
-	bges		EM1CON1	 | ...|X| >= 1/4
-	bra		EM1SM
-
-EM1CON1:
-|--Step 1.3
-|--The case |X| >= 1/4
-	movew		4(%a0),%d0	| ...expo. and partial sig. of |X|
-	cmpil		#0x4004C215,%d0	| ...70log2 rounded up to 16 bits
-	bles		EM1MAIN	 | ...1/4 <= |X| <= 70log2
-	bra		EM1BIG
-
-EM1MAIN:
-|--Step 2.
-|--This is the case:	1/4 <= |X| <= 70 log2.
-	fmovex		(%a0),%fp0	| ...load input from (a0)
-
-	fmovex		%fp0,%fp1
-	fmuls		#0x42B8AA3B,%fp0	| ...64/log2 * X
-	fmovemx	%fp2-%fp2/%fp3,-(%a7)		| ...save fp2
-|	MOVE.W		#$3F81,EM1A4		...prefetch in CB mode
-	fmovel		%fp0,%d0		| ...N = int( X * 64/log2 )
-	lea		EXPTBL,%a1
-	fmovel		%d0,%fp0		| ...convert to floating-format
-
-	movel		%d0,L_SCR1(%a6)			| ...save N temporarily
-	andil		#0x3F,%d0		 | ...D0 is J = N mod 64
-	lsll		#4,%d0
-	addal		%d0,%a1			| ...address of 2^(J/64)
-	movel		L_SCR1(%a6),%d0
-	asrl		#6,%d0			| ...D0 is M
-	movel		%d0,L_SCR1(%a6)			| ...save a copy of M
-|	MOVE.W		#$3FDC,L2		...prefetch L2 in CB mode
-
-|--Step 3.
-|--fp1,fp2 saved on the stack. fp0 is N, fp1 is X,
-|--a0 points to 2^(J/64), D0 and a1 both contain M
-	fmovex		%fp0,%fp2
-	fmuls		#0xBC317218,%fp0	| ...N * L1, L1 = lead(-log2/64)
-	fmulx		L2,%fp2		| ...N * L2, L1+L2 = -log2/64
-	faddx		%fp1,%fp0	 | ...X + N*L1
-	faddx		%fp2,%fp0	 | ...fp0 is R, reduced arg.
-|	MOVE.W		#$3FC5,EM1A2		...load EM1A2 in cache
-	addiw		#0x3FFF,%d0		| ...D0 is biased expo. of 2^M
-
-|--Step 4.
-|--WE NOW COMPUTE EXP(R)-1 BY A POLYNOMIAL
-|-- R + R*R*(A1 + R*(A2 + R*(A3 + R*(A4 + R*(A5 + R*A6)))))
-|--TO FULLY UTILIZE THE PIPELINE, WE COMPUTE S = R*R
-|--[R*S*(A2+S*(A4+S*A6))] + [R+S*(A1+S*(A3+S*A5))]
-
-	fmovex		%fp0,%fp1
-	fmulx		%fp1,%fp1		| ...fp1 IS S = R*R
-
-	fmoves		#0x3950097B,%fp2	| ...fp2 IS a6
-|	MOVE.W		#0,2(%a1)	...load 2^(J/64) in cache
-
-	fmulx		%fp1,%fp2		| ...fp2 IS S*A6
-	fmovex		%fp1,%fp3
-	fmuls		#0x3AB60B6A,%fp3	| ...fp3 IS S*A5
-
-	faddd		EM1A4,%fp2	| ...fp2 IS A4+S*A6
-	faddd		EM1A3,%fp3	| ...fp3 IS A3+S*A5
-	movew		%d0,SC(%a6)		| ...SC is 2^(M) in extended
-	clrw		SC+2(%a6)
-	movel		#0x80000000,SC+4(%a6)
-	clrl		SC+8(%a6)
-
-	fmulx		%fp1,%fp2		| ...fp2 IS S*(A4+S*A6)
-	movel		L_SCR1(%a6),%d0		| ...D0 is	M
-	negw		%d0		| ...D0 is -M
-	fmulx		%fp1,%fp3		| ...fp3 IS S*(A3+S*A5)
-	addiw		#0x3FFF,%d0	| ...biased expo. of 2^(-M)
-	faddd		EM1A2,%fp2	| ...fp2 IS A2+S*(A4+S*A6)
-	fadds		#0x3F000000,%fp3	| ...fp3 IS A1+S*(A3+S*A5)
-
-	fmulx		%fp1,%fp2		| ...fp2 IS S*(A2+S*(A4+S*A6))
-	oriw		#0x8000,%d0	| ...signed/expo. of -2^(-M)
-	movew		%d0,ONEBYSC(%a6)	| ...OnebySc is -2^(-M)
-	clrw		ONEBYSC+2(%a6)
-	movel		#0x80000000,ONEBYSC+4(%a6)
-	clrl		ONEBYSC+8(%a6)
-	fmulx		%fp3,%fp1		| ...fp1 IS S*(A1+S*(A3+S*A5))
-|					...fp3 released
-
-	fmulx		%fp0,%fp2		| ...fp2 IS R*S*(A2+S*(A4+S*A6))
-	faddx		%fp1,%fp0		| ...fp0 IS R+S*(A1+S*(A3+S*A5))
-|					...fp1 released
-
-	faddx		%fp2,%fp0		| ...fp0 IS EXP(R)-1
-|					...fp2 released
-	fmovemx	(%a7)+,%fp2-%fp2/%fp3	| ...fp2 restored
-
-|--Step 5
-|--Compute 2^(J/64)*p
-
-	fmulx		(%a1),%fp0	| ...2^(J/64)*(Exp(R)-1)
-
-|--Step 6
-|--Step 6.1
-	movel		L_SCR1(%a6),%d0		| ...retrieve M
-	cmpil		#63,%d0
-	bles		MLE63
-|--Step 6.2	M >= 64
-	fmoves		12(%a1),%fp1	| ...fp1 is t
-	faddx		ONEBYSC(%a6),%fp1	| ...fp1 is t+OnebySc
-	faddx		%fp1,%fp0		| ...p+(t+OnebySc), fp1 released
-	faddx		(%a1),%fp0	| ...T+(p+(t+OnebySc))
-	bras		EM1SCALE
-MLE63:
-|--Step 6.3	M <= 63
-	cmpil		#-3,%d0
-	bges		MGEN3
-MLTN3:
-|--Step 6.4	M <= -4
-	fadds		12(%a1),%fp0	| ...p+t
-	faddx		(%a1),%fp0	| ...T+(p+t)
-	faddx		ONEBYSC(%a6),%fp0	| ...OnebySc + (T+(p+t))
-	bras		EM1SCALE
-MGEN3:
-|--Step 6.5	-3 <= M <= 63
-	fmovex		(%a1)+,%fp1	| ...fp1 is T
-	fadds		(%a1),%fp0	| ...fp0 is p+t
-	faddx		ONEBYSC(%a6),%fp1	| ...fp1 is T+OnebySc
-	faddx		%fp1,%fp0		| ...(T+OnebySc)+(p+t)
-
-EM1SCALE:
-|--Step 6.6
-	fmovel		%d1,%FPCR
-	fmulx		SC(%a6),%fp0
-
-	bra		t_frcinx
-
-EM1SM:
-|--Step 7	|X| < 1/4.
-	cmpil		#0x3FBE0000,%d0	| ...2^(-65)
-	bges		EM1POLY
-
-EM1TINY:
-|--Step 8	|X| < 2^(-65)
-	cmpil		#0x00330000,%d0	| ...2^(-16312)
-	blts		EM12TINY
-|--Step 8.2
-	movel		#0x80010000,SC(%a6)	| ...SC is -2^(-16382)
-	movel		#0x80000000,SC+4(%a6)
-	clrl		SC+8(%a6)
-	fmovex		(%a0),%fp0
-	fmovel		%d1,%FPCR
-	faddx		SC(%a6),%fp0
-
-	bra		t_frcinx
-
-EM12TINY:
-|--Step 8.3
-	fmovex		(%a0),%fp0
-	fmuld		TWO140,%fp0
-	movel		#0x80010000,SC(%a6)
-	movel		#0x80000000,SC+4(%a6)
-	clrl		SC+8(%a6)
-	faddx		SC(%a6),%fp0
-	fmovel		%d1,%FPCR
-	fmuld		TWON140,%fp0
-
-	bra		t_frcinx
-
-EM1POLY:
-|--Step 9	exp(X)-1 by a simple polynomial
-	fmovex		(%a0),%fp0	| ...fp0 is X
-	fmulx		%fp0,%fp0		| ...fp0 is S := X*X
-	fmovemx	%fp2-%fp2/%fp3,-(%a7)	| ...save fp2
-	fmoves		#0x2F30CAA8,%fp1	| ...fp1 is B12
-	fmulx		%fp0,%fp1		| ...fp1 is S*B12
-	fmoves		#0x310F8290,%fp2	| ...fp2 is B11
-	fadds		#0x32D73220,%fp1	| ...fp1 is B10+S*B12
-
-	fmulx		%fp0,%fp2		| ...fp2 is S*B11
-	fmulx		%fp0,%fp1		| ...fp1 is S*(B10 + ...
-
-	fadds		#0x3493F281,%fp2	| ...fp2 is B9+S*...
-	faddd		EM1B8,%fp1	| ...fp1 is B8+S*...
-
-	fmulx		%fp0,%fp2		| ...fp2 is S*(B9+...
-	fmulx		%fp0,%fp1		| ...fp1 is S*(B8+...
-
-	faddd		EM1B7,%fp2	| ...fp2 is B7+S*...
-	faddd		EM1B6,%fp1	| ...fp1 is B6+S*...
-
-	fmulx		%fp0,%fp2		| ...fp2 is S*(B7+...
-	fmulx		%fp0,%fp1		| ...fp1 is S*(B6+...
-
-	faddd		EM1B5,%fp2	| ...fp2 is B5+S*...
-	faddd		EM1B4,%fp1	| ...fp1 is B4+S*...
-
-	fmulx		%fp0,%fp2		| ...fp2 is S*(B5+...
-	fmulx		%fp0,%fp1		| ...fp1 is S*(B4+...
-
-	faddd		EM1B3,%fp2	| ...fp2 is B3+S*...
-	faddx		EM1B2,%fp1	| ...fp1 is B2+S*...
-
-	fmulx		%fp0,%fp2		| ...fp2 is S*(B3+...
-	fmulx		%fp0,%fp1		| ...fp1 is S*(B2+...
-
-	fmulx		%fp0,%fp2		| ...fp2 is S*S*(B3+...)
-	fmulx		(%a0),%fp1	| ...fp1 is X*S*(B2...
-
-	fmuls		#0x3F000000,%fp0	| ...fp0 is S*B1
-	faddx		%fp2,%fp1		| ...fp1 is Q
-|					...fp2 released
-
-	fmovemx	(%a7)+,%fp2-%fp2/%fp3	| ...fp2 restored
-
-	faddx		%fp1,%fp0		| ...fp0 is S*B1+Q
-|					...fp1 released
-
-	fmovel		%d1,%FPCR
-	faddx		(%a0),%fp0
-
-	bra		t_frcinx
-
-EM1BIG:
-|--Step 10	|X| > 70 log2
-	movel		(%a0),%d0
-	cmpil		#0,%d0
-	bgt		EXPC1
-|--Step 10.2
-	fmoves		#0xBF800000,%fp0	| ...fp0 is -1
-	fmovel		%d1,%FPCR
-	fadds		#0x00800000,%fp0	| ...-1 + 2^(-126)
-
-	bra		t_frcinx
-
-	|end
diff --git a/ANDROID_3.4.5/arch/m68k/fpsp040/sgetem.S b/ANDROID_3.4.5/arch/m68k/fpsp040/sgetem.S
deleted file mode 100644
index d9234f4a..00000000
--- a/ANDROID_3.4.5/arch/m68k/fpsp040/sgetem.S
+++ /dev/null
@@ -1,140 +0,0 @@
-|
-|	sgetem.sa 3.1 12/10/90
-|
-|	The entry point sGETEXP returns the exponent portion
-|	of the input argument.  The exponent bias is removed
-|	and the exponent value is returned as an extended
-|	precision number in fp0.  sGETEXPD handles denormalized
-|	numbers.
-|
-|	The entry point sGETMAN extracts the mantissa of the
-|	input argument.  The mantissa is converted to an
-|	extended precision number and returned in fp0.  The
-|	range of the result is [1.0 - 2.0).
-|
-|
-|	Input:  Double-extended number X in the ETEMP space in
-|		the floating-point save stack.
-|
-|	Output:	The functions return exp(X) or man(X) in fp0.
-|
-|	Modified: fp0.
-|
-|
-|		Copyright (C) Motorola, Inc. 1990
-|			All Rights Reserved
-|
-|       For details on the license for this file, please see the
-|       file, README, in this same directory.
-
-|SGETEM	idnt	2,1 | Motorola 040 Floating Point Software Package
-
-	|section 8
-
-#include "fpsp.h"
-
-	|xref	nrm_set
-
-|
-| This entry point is used by the unimplemented instruction exception
-| handler.  It points a0 to the input operand.
-|
-|
-|
-|	SGETEXP
-|
-
-	.global	sgetexp
-sgetexp:
-	movew	LOCAL_EX(%a0),%d0	|get the exponent
-	bclrl	#15,%d0		|clear the sign bit
-	subw	#0x3fff,%d0	|subtract off the bias
-	fmovew  %d0,%fp0		|move the exp to fp0
-	rts
-
-	.global	sgetexpd
-sgetexpd:
-	bclrb	#sign_bit,LOCAL_EX(%a0)
-	bsr	nrm_set		|normalize (exp will go negative)
-	movew	LOCAL_EX(%a0),%d0	|load resulting exponent into d0
-	subw	#0x3fff,%d0	|subtract off the bias
-	fmovew	%d0,%fp0		|move the exp to fp0
-	rts
-|
-|
-| This entry point is used by the unimplemented instruction exception
-| handler.  It points a0 to the input operand.
-|
-|
-|
-|	SGETMAN
-|
-|
-| For normalized numbers, leave the mantissa alone, simply load
-| with an exponent of +/- $3fff.
-|
-	.global	sgetman
-sgetman:
-	movel	USER_FPCR(%a6),%d0
-	andil	#0xffffff00,%d0	|clear rounding precision and mode
-	fmovel	%d0,%fpcr		|this fpcr setting is used by the 882
-	movew	LOCAL_EX(%a0),%d0	|get the exp (really just want sign bit)
-	orw	#0x7fff,%d0	|clear old exp
-	bclrl	#14,%d0		|make it the new exp +-3fff
-	movew	%d0,LOCAL_EX(%a0)	|move the sign & exp back to fsave stack
-	fmovex	(%a0),%fp0	|put new value back in fp0
-	rts
-
-|
-| For denormalized numbers, shift the mantissa until the j-bit = 1,
-| then load the exponent with +/1 $3fff.
-|
-	.global	sgetmand
-sgetmand:
-	movel	LOCAL_HI(%a0),%d0	|load ms mant in d0
-	movel	LOCAL_LO(%a0),%d1	|load ls mant in d1
-	bsr	shft		|shift mantissa bits till msbit is set
-	movel	%d0,LOCAL_HI(%a0)	|put ms mant back on stack
-	movel	%d1,LOCAL_LO(%a0)	|put ls mant back on stack
-	bras	sgetman
-
-|
-|	SHFT
-|
-|	Shifts the mantissa bits until msbit is set.
-|	input:
-|		ms mantissa part in d0
-|		ls mantissa part in d1
-|	output:
-|		shifted bits in d0 and d1
-shft:
-	tstl	%d0		|if any bits set in ms mant
-	bnes	upper		|then branch
-|				;else no bits set in ms mant
-	tstl	%d1		|test if any bits set in ls mant
-	bnes	cont		|if set then continue
-	bras	shft_end	|else return
-cont:
-	movel	%d3,-(%a7)	|save d3
-	exg	%d0,%d1		|shift ls mant to ms mant
-	bfffo	%d0{#0:#32},%d3	|find first 1 in ls mant to d0
-	lsll	%d3,%d0		|shift first 1 to integer bit in ms mant
-	movel	(%a7)+,%d3	|restore d3
-	bras	shft_end
-upper:
-
-	moveml	%d3/%d5/%d6,-(%a7)	|save registers
-	bfffo	%d0{#0:#32},%d3	|find first 1 in ls mant to d0
-	lsll	%d3,%d0		|shift ms mant until j-bit is set
-	movel	%d1,%d6		|save ls mant in d6
-	lsll	%d3,%d1		|shift ls mant by count
-	movel	#32,%d5
-	subl	%d3,%d5		|sub 32 from shift for ls mant
-	lsrl	%d5,%d6		|shift off all bits but those that will
-|				;be shifted into ms mant
-	orl	%d6,%d0		|shift the ls mant bits into the ms mant
-	moveml	(%a7)+,%d3/%d5/%d6	|restore registers
-shft_end:
-	rts
-
-	|end
diff --git a/ANDROID_3.4.5/arch/m68k/fpsp040/sint.S b/ANDROID_3.4.5/arch/m68k/fpsp040/sint.S
deleted file mode 100644
index 0e92d4e5..00000000
--- a/ANDROID_3.4.5/arch/m68k/fpsp040/sint.S
+++ /dev/null
@@ -1,246 +0,0 @@
-|
-|	sint.sa 3.1 12/10/90
-|
-|	The entry point sINT computes the rounded integer
-|	equivalent of the input argument, sINTRZ computes
-|	the integer rounded to zero of the input argument.
-|
-|	Entry points sint and sintrz are called from do_func
-|	to emulate the fint and fintrz unimplemented instructions,
-|	respectively.  Entry point sintdo is used by bindec.
-|
-|	Input: (Entry points sint and sintrz) Double-extended
-|		number X in the ETEMP space in the floating-point
-|		save stack.
-|	       (Entry point sintdo) Double-extended number X in
-|		location pointed to by the address register a0.
-|	       (Entry point sintd) Double-extended denormalized
-|		number X in the ETEMP space in the floating-point
-|		save stack.
-|
-|	Output: The function returns int(X) or intrz(X) in fp0.
-|
-|	Modifies: fp0.
-|
-|	Algorithm: (sint and sintrz)
-|
-|	1. If exp(X) >= 63, return X.
-|	   If exp(X) < 0, return +/- 0 or +/- 1, according to
-|	   the rounding mode.
-|
-|	2. (X is in range) set rsc = 63 - exp(X). Unnormalize the
-|	   result to the exponent $403e.
-|
-|	3. Round the result in the mode given in USER_FPCR. For
-|	   sintrz, force round-to-zero mode.
-|
-|	4. Normalize the rounded result; store in fp0.
-|
-|	For the denormalized cases, force the correct result
-|	for the given sign and rounding mode.
-|
-|		        Sign(X)
-|		RMODE   +    -
-|		-----  --------
-|		 RN    +0   -0
-|		 RZ    +0   -0
-|		 RM    +0   -1
-|		 RP    +1   -0
-|
-|
-|		Copyright (C) Motorola, Inc. 1990
-|			All Rights Reserved
-|
-|       For details on the license for this file, please see the
-|       file, README, in this same directory.
-
-|SINT    idnt    2,1 | Motorola 040 Floating Point Software Package
-
-	|section	8
-
-#include "fpsp.h"
-
-	|xref	dnrm_lp
-	|xref	nrm_set
-	|xref	round
-	|xref	t_inx2
-	|xref	ld_pone
-	|xref	ld_mone
-	|xref	ld_pzero
-	|xref	ld_mzero
-	|xref	snzrinx
-
-|
-|	FINT
-|
-	.global	sint
-sint:
-	bfextu	FPCR_MODE(%a6){#2:#2},%d1	|use user's mode for rounding
-|					;implicitly has extend precision
-|					;in upper word.
-	movel	%d1,L_SCR1(%a6)		|save mode bits
-	bras	sintexc
-
-|
-|	FINT with extended denorm inputs.
-|
-	.global	sintd
-sintd:
-	btstb	#5,FPCR_MODE(%a6)
-	beq	snzrinx		|if round nearest or round zero, +/- 0
-	btstb	#4,FPCR_MODE(%a6)
-	beqs	rnd_mns
-rnd_pls:
-	btstb	#sign_bit,LOCAL_EX(%a0)
-	bnes	sintmz
-	bsr	ld_pone		|if round plus inf and pos, answer is +1
-	bra	t_inx2
-rnd_mns:
-	btstb	#sign_bit,LOCAL_EX(%a0)
-	beqs	sintpz
-	bsr	ld_mone		|if round mns inf and neg, answer is -1
-	bra	t_inx2
-sintpz:
-	bsr	ld_pzero
-	bra	t_inx2
-sintmz:
-	bsr	ld_mzero
-	bra	t_inx2
-
-|
-|	FINTRZ
-|
-	.global	sintrz
-sintrz:
-	movel	#1,L_SCR1(%a6)		|use rz mode for rounding
-|					;implicitly has extend precision
-|					;in upper word.
-	bras	sintexc
-|
-|	SINTDO
-|
-|	Input:	a0 points to an IEEE extended format operand
-|	Output:	fp0 has the result
-|
-| Exceptions:
-|
-| If the subroutine results in an inexact operation, the inx2 and
-| ainx bits in the USER_FPSR are set.
-|
-|
-	.global	sintdo
-sintdo:
-	bfextu	FPCR_MODE(%a6){#2:#2},%d1	|use user's mode for rounding
-|					;implicitly has ext precision
-|					;in upper word.
-	movel	%d1,L_SCR1(%a6)		|save mode bits
-|
-| Real work of sint is in sintexc
-|
-sintexc:
-	bclrb	#sign_bit,LOCAL_EX(%a0)	|convert to internal extended
-|					;format
-	sne	LOCAL_SGN(%a0)
-	cmpw	#0x403e,LOCAL_EX(%a0)	|check if (unbiased) exp > 63
-	bgts	out_rnge			|branch if exp < 63
-	cmpw	#0x3ffd,LOCAL_EX(%a0)	|check if (unbiased) exp < 0
-	bgt	in_rnge			|if 63 >= exp > 0, do calc
-|
-| Input is less than zero.  Restore sign, and check for directed
-| rounding modes.  L_SCR1 contains the rmode in the lower byte.
-|
-un_rnge:
-	btstb	#1,L_SCR1+3(%a6)		|check for rn and rz
-	beqs	un_rnrz
-	tstb	LOCAL_SGN(%a0)		|check for sign
-	bnes	un_rmrp_neg
-|
-| Sign is +.  If rp, load +1.0, if rm, load +0.0
-|
-	cmpib	#3,L_SCR1+3(%a6)		|check for rp
-	beqs	un_ldpone		|if rp, load +1.0
-	bsr	ld_pzero		|if rm, load +0.0
-	bra	t_inx2
-un_ldpone:
-	bsr	ld_pone
-	bra	t_inx2
-|
-| Sign is -.  If rm, load -1.0, if rp, load -0.0
-|
-un_rmrp_neg:
-	cmpib	#2,L_SCR1+3(%a6)		|check for rm
-	beqs	un_ldmone		|if rm, load -1.0
-	bsr	ld_mzero		|if rp, load -0.0
-	bra	t_inx2
-un_ldmone:
-	bsr	ld_mone
-	bra	t_inx2
-|
-| Rmode is rn or rz; return signed zero
-|
-un_rnrz:
-	tstb	LOCAL_SGN(%a0)		|check for sign
-	bnes	un_rnrz_neg
-	bsr	ld_pzero
-	bra	t_inx2
-un_rnrz_neg:
-	bsr	ld_mzero
-	bra	t_inx2
-
-|
-| Input is greater than 2^63.  All bits are significant.  Return
-| the input.
-|
-out_rnge:
-	bfclr	LOCAL_SGN(%a0){#0:#8}	|change back to IEEE ext format
-	beqs	intps
-	bsetb	#sign_bit,LOCAL_EX(%a0)
-intps:
-	fmovel	%fpcr,-(%sp)
-	fmovel	#0,%fpcr
-	fmovex LOCAL_EX(%a0),%fp0	|if exp > 63
-|					;then return X to the user
-|					;there are no fraction bits
-	fmovel	(%sp)+,%fpcr
-	rts
-
-in_rnge:
-|					;shift off fraction bits
-	clrl	%d0			|clear d0 - initial g,r,s for
-|					;dnrm_lp
-	movel	#0x403e,%d1		|set threshold for dnrm_lp
-|					;assumes a0 points to operand
-	bsr	dnrm_lp
-|					;returns unnormalized number
-|					;pointed by a0
-|					;output d0 supplies g,r,s
-|					;used by round
-	movel	L_SCR1(%a6),%d1		|use selected rounding mode
-|
-|
-	bsr	round			|round the unnorm based on users
-|					;input	a0 ptr to ext X
-|					;	d0 g,r,s bits
-|					;	d1 PREC/MODE info
-|					;output a0 ptr to rounded result
-|					;inexact flag set in USER_FPSR
-|					;if initial grs set
-|
-| normalize the rounded result and store value in fp0
-|
-	bsr	nrm_set			|normalize the unnorm
-|					;Input: a0 points to operand to
-|					;be normalized
-|					;Output: a0 points to normalized
-|					;result
-	bfclr	LOCAL_SGN(%a0){#0:#8}
-	beqs	nrmrndp
-	bsetb	#sign_bit,LOCAL_EX(%a0)	|return to IEEE extended format
-nrmrndp:
-	fmovel	%fpcr,-(%sp)
-	fmovel	#0,%fpcr
-	fmovex LOCAL_EX(%a0),%fp0	|move result to fp0
-	fmovel	(%sp)+,%fpcr
-	rts
-
-	|end
diff --git a/ANDROID_3.4.5/arch/m68k/fpsp040/skeleton.S b/ANDROID_3.4.5/arch/m68k/fpsp040/skeleton.S
deleted file mode 100644
index a8f41615..00000000
--- a/ANDROID_3.4.5/arch/m68k/fpsp040/skeleton.S
+++ /dev/null
@@ -1,513 +0,0 @@
-|
-|	skeleton.sa 3.2 4/26/91
-|
-|	This file contains code that is system dependent and will
-|	need to be modified to install the FPSP.
-|
-|	Each entry point for exception 'xxxx' begins with a 'jmp fpsp_xxxx'.
-|	Put any target system specific handling that must be done immediately
-|	before the jump instruction.  If there no handling necessary, then
-|	the 'fpsp_xxxx' handler entry point should be placed in the exception
-|	table so that the 'jmp' can be eliminated. If the FPSP determines that the
-|	exception is one that must be reported then there will be a
-|	return from the package by a 'jmp real_xxxx'.  At that point
-|	the machine state will be identical to the state before
-|	the FPSP was entered.  In particular, whatever condition
-|	that caused the exception will still be pending when the FPSP
-|	package returns.  Thus, there will be system specific code
-|	to handle the exception.
-|
-|	If the exception was completely handled by the package, then
-|	the return will be via a 'jmp fpsp_done'.  Unless there is
-|	OS specific work to be done (such as handling a context switch or
-|	interrupt) the user program can be resumed via 'rte'.
-|
-|	In the following skeleton code, some typical 'real_xxxx' handling
-|	code is shown.  This code may need to be moved to an appropriate
-|	place in the target system, or rewritten.
-|
-
-|		Copyright (C) Motorola, Inc. 1990
-|			All Rights Reserved
-|
-|       For details on the license for this file, please see the
-|       file, README, in this same directory.
-
-|
-|	Modified for Linux-1.3.x by Jes Sorensen (jds@kom.auc.dk)
-|
-
-#include <linux/linkage.h>
-#include <asm/entry.h>
-#include <asm/asm-offsets.h>
-
-|SKELETON	idnt    2,1 | Motorola 040 Floating Point Software Package
-
-	|section 15
-|
-|	The following counters are used for standalone testing
-|
-
-	|section 8
-
-#include "fpsp.h"
-
-	|xref	b1238_fix
-
-|
-|	Divide by Zero exception
-|
-|	All dz exceptions are 'real', hence no fpsp_dz entry point.
-|
-	.global	dz
-	.global	real_dz
-dz:
-real_dz:
-	link		%a6,#-LOCAL_SIZE
-	fsave		-(%sp)
-	bclrb		#E1,E_BYTE(%a6)
-	frestore	(%sp)+
-	unlk		%a6
-
-	SAVE_ALL_INT
-	GET_CURRENT(%d0)
-	movel	%sp,%sp@-		| stack frame pointer argument
-	bsrl	trap_c
-	addql	#4,%sp
-	bral	ret_from_exception
-
-|
-|	Inexact exception
-|
-|	All inexact exceptions are real, but the 'real' handler
-|	will probably want to clear the pending exception.
-|	The provided code will clear the E3 exception (if pending),
-|	otherwise clear the E1 exception.  The frestore is not really
-|	necessary for E1 exceptions.
-|
-| Code following the 'inex' label is to handle bug #1232.  In this
-| bug, if an E1 snan, ovfl, or unfl occurred, and the process was
-| swapped out before taking the exception, the exception taken on
-| return was inex, rather than the correct exception.  The snan, ovfl,
-| and unfl exception to be taken must not have been enabled.  The
-| fix is to check for E1, and the existence of one of snan, ovfl,
-| or unfl bits set in the fpsr.  If any of these are set, branch
-| to the appropriate  handler for the exception in the fpsr.  Note
-| that this fix is only for d43b parts, and is skipped if the
-| version number is not $40.
-|
-|
-	.global	real_inex
-	.global	inex
-inex:
-	link		%a6,#-LOCAL_SIZE
-	fsave		-(%sp)
-	cmpib		#VER_40,(%sp)		|test version number
-	bnes		not_fmt40
-	fmovel		%fpsr,-(%sp)
-	btstb		#E1,E_BYTE(%a6)		|test for E1 set
-	beqs		not_b1232
-	btstb		#snan_bit,2(%sp) |test for snan
-	beq		inex_ckofl
-	addl		#4,%sp
-	frestore	(%sp)+
-	unlk		%a6
-	bra		snan
-inex_ckofl:
-	btstb		#ovfl_bit,2(%sp) |test for ovfl
-	beq		inex_ckufl
-	addl		#4,%sp
-	frestore	(%sp)+
-	unlk		%a6
-	bra		ovfl
-inex_ckufl:
-	btstb		#unfl_bit,2(%sp) |test for unfl
-	beq		not_b1232
-	addl		#4,%sp
-	frestore	(%sp)+
-	unlk		%a6
-	bra		unfl
-
-|
-| We do not have the bug 1232 case.  Clean up the stack and call
-| real_inex.
-|
-not_b1232:
-	addl		#4,%sp
-	frestore	(%sp)+
-	unlk		%a6
-
-real_inex:
-
-	link		%a6,#-LOCAL_SIZE
-	fsave		-(%sp)
-not_fmt40:
-	bclrb		#E3,E_BYTE(%a6)		|clear and test E3 flag
-	beqs		inex_cke1
-|
-| Clear dirty bit on dest resister in the frame before branching
-| to b1238_fix.
-|
-	moveml		%d0/%d1,USER_DA(%a6)
-	bfextu		CMDREG1B(%a6){#6:#3},%d0		|get dest reg no
-	bclrb		%d0,FPR_DIRTY_BITS(%a6)	|clr dest dirty bit
-	bsrl		b1238_fix		|test for bug1238 case
-	moveml		USER_DA(%a6),%d0/%d1
-	bras		inex_done
-inex_cke1:
-	bclrb		#E1,E_BYTE(%a6)
-inex_done:
-	frestore	(%sp)+
-	unlk		%a6
-
-	SAVE_ALL_INT
-	GET_CURRENT(%d0)
-	movel	%sp,%sp@-		| stack frame pointer argument
-	bsrl	trap_c
-	addql	#4,%sp
-	bral	ret_from_exception
-
-|
-|	Overflow exception
-|
-	|xref	fpsp_ovfl
-	.global	real_ovfl
-	.global	ovfl
-ovfl:
-	jmp	fpsp_ovfl
-real_ovfl:
-
-	link		%a6,#-LOCAL_SIZE
-	fsave		-(%sp)
-	bclrb		#E3,E_BYTE(%a6)		|clear and test E3 flag
-	bnes		ovfl_done
-	bclrb		#E1,E_BYTE(%a6)
-ovfl_done:
-	frestore	(%sp)+
-	unlk		%a6
-
-	SAVE_ALL_INT
-	GET_CURRENT(%d0)
-	movel	%sp,%sp@-		| stack frame pointer argument
-	bsrl	trap_c
-	addql	#4,%sp
-	bral	ret_from_exception
-
-|
-|	Underflow exception
-|
-	|xref	fpsp_unfl
-	.global	real_unfl
-	.global	unfl
-unfl:
-	jmp	fpsp_unfl
-real_unfl:
-
-	link		%a6,#-LOCAL_SIZE
-	fsave		-(%sp)
-	bclrb		#E3,E_BYTE(%a6)		|clear and test E3 flag
-	bnes		unfl_done
-	bclrb		#E1,E_BYTE(%a6)
-unfl_done:
-	frestore	(%sp)+
-	unlk		%a6
-
-	SAVE_ALL_INT
-	GET_CURRENT(%d0)
-	movel	%sp,%sp@-		| stack frame pointer argument
-	bsrl	trap_c
-	addql	#4,%sp
-	bral	ret_from_exception
-
-|
-|	Signalling NAN exception
-|
-	|xref	fpsp_snan
-	.global	real_snan
-	.global	snan
-snan:
-	jmp	fpsp_snan
-real_snan:
-	link		%a6,#-LOCAL_SIZE
-	fsave		-(%sp)
-	bclrb		#E1,E_BYTE(%a6)	|snan is always an E1 exception
-	frestore	(%sp)+
-	unlk		%a6
-
-	SAVE_ALL_INT
-	GET_CURRENT(%d0)
-	movel	%sp,%sp@-		| stack frame pointer argument
-	bsrl	trap_c
-	addql	#4,%sp
-	bral	ret_from_exception
-
-|
-|	Operand Error exception
-|
-	|xref	fpsp_operr
-	.global	real_operr
-	.global	operr
-operr:
-	jmp	fpsp_operr
-real_operr:
-	link		%a6,#-LOCAL_SIZE
-	fsave		-(%sp)
-	bclrb		#E1,E_BYTE(%a6)	|operr is always an E1 exception
-	frestore	(%sp)+
-	unlk		%a6
-
-	SAVE_ALL_INT
-	GET_CURRENT(%d0)
-	movel	%sp,%sp@-		| stack frame pointer argument
-	bsrl	trap_c
-	addql	#4,%sp
-	bral	ret_from_exception
-
-
-|
-|	BSUN exception
-|
-|	This sample handler simply clears the nan bit in the FPSR.
-|
-	|xref	fpsp_bsun
-	.global	real_bsun
-	.global	bsun
-bsun:
-	jmp	fpsp_bsun
-real_bsun:
-	link		%a6,#-LOCAL_SIZE
-	fsave		-(%sp)
-	bclrb		#E1,E_BYTE(%a6)	|bsun is always an E1 exception
-	fmovel		%FPSR,-(%sp)
-	bclrb		#nan_bit,(%sp)
-	fmovel		(%sp)+,%FPSR
-	frestore	(%sp)+
-	unlk		%a6
-
-	SAVE_ALL_INT
-	GET_CURRENT(%d0)
-	movel	%sp,%sp@-		| stack frame pointer argument
-	bsrl	trap_c
-	addql	#4,%sp
-	bral	ret_from_exception
-
-|
-|	F-line exception
-|
-|	A 'real' F-line exception is one that the FPSP isn't supposed to
-|	handle. E.g. an instruction with a co-processor ID that is not 1.
-|
-|
-	|xref	fpsp_fline
-	.global	real_fline
-	.global	fline
-fline:
-	jmp	fpsp_fline
-real_fline:
-
-	SAVE_ALL_INT
-	GET_CURRENT(%d0)
-	movel	%sp,%sp@-		| stack frame pointer argument
-	bsrl	trap_c
-	addql	#4,%sp
-	bral	ret_from_exception
-
-|
-|	Unsupported data type exception
-|
-	|xref	fpsp_unsupp
-	.global	real_unsupp
-	.global	unsupp
-unsupp:
-	jmp	fpsp_unsupp
-real_unsupp:
-	link		%a6,#-LOCAL_SIZE
-	fsave		-(%sp)
-	bclrb		#E1,E_BYTE(%a6)	|unsupp is always an E1 exception
-	frestore	(%sp)+
-	unlk		%a6
-
-	SAVE_ALL_INT
-	GET_CURRENT(%d0)
-	movel	%sp,%sp@-		| stack frame pointer argument
-	bsrl	trap_c
-	addql	#4,%sp
-	bral	ret_from_exception
-
-|
-|	Trace exception
-|
-	.global	real_trace
-real_trace:
-	|
-	bral	trap
-
-|
-|	fpsp_fmt_error --- exit point for frame format error
-|
-|	The fpu stack frame does not match the frames existing
-|	or planned at the time of this writing.  The fpsp is
-|	unable to handle frame sizes not in the following
-|	version:size pairs:
-|
-|	{4060, 4160} - busy frame
-|	{4028, 4130} - unimp frame
-|	{4000, 4100} - idle frame
-|
-|	This entry point simply holds an f-line illegal value.
-|	Replace this with a call to your kernel panic code or
-|	code to handle future revisions of the fpu.
-|
-	.global	fpsp_fmt_error
-fpsp_fmt_error:
-
-	.long	0xf27f0000	|f-line illegal
-
-|
-|	fpsp_done --- FPSP exit point
-|
-|	The exception has been handled by the package and we are ready
-|	to return to user mode, but there may be OS specific code
-|	to execute before we do.  If there is, do it now.
-|
-|
-
-	.global	fpsp_done
-fpsp_done:
-	btst	#0x5,%sp@		| supervisor bit set in saved SR?
-	beq	.Lnotkern
-	rte
-.Lnotkern:
-	SAVE_ALL_INT
-	GET_CURRENT(%d0)
-	| deliver signals, reschedule etc..
-	jra	ret_from_exception
-
-|
-|	mem_write --- write to user or supervisor address space
-|
-| Writes to memory while in supervisor mode.  copyout accomplishes
-| this via a 'moves' instruction.  copyout is a UNIX SVR3 (and later) function.
-| If you don't have copyout, use the local copy of the function below.
-|
-|	a0 - supervisor source address
-|	a1 - user destination address
-|	d0 - number of bytes to write (maximum count is 12)
-|
-| The supervisor source address is guaranteed to point into the supervisor
-| stack.  The result is that a UNIX
-| process is allowed to sleep as a consequence of a page fault during
-| copyout.  The probability of a page fault is exceedingly small because
-| the 68040 always reads the destination address and thus the page
-| faults should have already been handled.
-|
-| If the EXC_SR shows that the exception was from supervisor space,
-| then just do a dumb (and slow) memory move.  In a UNIX environment
-| there shouldn't be any supervisor mode floating point exceptions.
-|
-	.global	mem_write
-mem_write:
-	btstb	#5,EXC_SR(%a6)	|check for supervisor state
-	beqs	user_write
-super_write:
-	moveb	(%a0)+,(%a1)+
-	subql	#1,%d0
-	bnes	super_write
-	rts
-user_write:
-	movel	%d1,-(%sp)	|preserve d1 just in case
-	movel	%d0,-(%sp)
-	movel	%a1,-(%sp)
-	movel	%a0,-(%sp)
-	jsr		copyout
-	addw	#12,%sp
-	movel	(%sp)+,%d1
-	rts
-|
-|	mem_read --- read from user or supervisor address space
-|
-| Reads from memory while in supervisor mode.  copyin accomplishes
-| this via a 'moves' instruction.  copyin is a UNIX SVR3 (and later) function.
-| If you don't have copyin, use the local copy of the function below.
-|
-| The FPSP calls mem_read to read the original F-line instruction in order
-| to extract the data register number when the 'Dn' addressing mode is
-| used.
-|
-|Input:
-|	a0 - user source address
-|	a1 - supervisor destination address
-|	d0 - number of bytes to read (maximum count is 12)
-|
-| Like mem_write, mem_read always reads with a supervisor
-| destination address on the supervisor stack.  Also like mem_write,
-| the EXC_SR is checked and a simple memory copy is done if reading
-| from supervisor space is indicated.
-|
-	.global	mem_read
-mem_read:
-	btstb	#5,EXC_SR(%a6)	|check for supervisor state
-	beqs	user_read
-super_read:
-	moveb	(%a0)+,(%a1)+
-	subql	#1,%d0
-	bnes	super_read
-	rts
-user_read:
-	movel	%d1,-(%sp)	|preserve d1 just in case
-	movel	%d0,-(%sp)
-	movel	%a1,-(%sp)
-	movel	%a0,-(%sp)
-	jsr	copyin
-	addw	#12,%sp
-	movel	(%sp)+,%d1
-	rts
-
-|
-| Use these routines if your kernel doesn't have copyout/copyin equivalents.
-| Assumes that D0/D1/A0/A1 are scratch registers. copyout overwrites DFC,
-| and copyin overwrites SFC.
-|
-copyout:
-	movel	4(%sp),%a0	| source
-	movel	8(%sp),%a1	| destination
-	movel	12(%sp),%d0	| count
-	subl	#1,%d0		| dec count by 1 for dbra
-	movel	#1,%d1
-
-|	DFC is already set
-|	movec	%d1,%DFC		| set dfc for user data space
-moreout:
-	moveb	(%a0)+,%d1	| fetch supervisor byte
-out_ea:
-	movesb	%d1,(%a1)+	| write user byte
-	dbf	%d0,moreout
-	rts
-
-copyin:
-	movel	4(%sp),%a0	| source
-	movel	8(%sp),%a1	| destination
-	movel	12(%sp),%d0	| count
-	subl	#1,%d0		| dec count by 1 for dbra
-	movel	#1,%d1
-|	SFC is already set
-|	movec	%d1,%SFC		| set sfc for user space
-morein:
-in_ea:
-	movesb	(%a0)+,%d1	| fetch user byte
-	moveb	%d1,(%a1)+	| write supervisor byte
-	dbf	%d0,morein
-	rts
-
-	.section .fixup,#alloc,#execinstr
-	.even
-1:
-	jbra	fpsp040_die
-
-	.section __ex_table,#alloc
-	.align	4
-
-	.long	in_ea,1b
-	.long	out_ea,1b
-
-	|end
diff --git a/ANDROID_3.4.5/arch/m68k/fpsp040/slog2.S b/ANDROID_3.4.5/arch/m68k/fpsp040/slog2.S
deleted file mode 100644
index fac2c738..00000000
--- a/ANDROID_3.4.5/arch/m68k/fpsp040/slog2.S
+++ /dev/null
@@ -1,187 +0,0 @@
-|
-|	slog2.sa 3.1 12/10/90
-|
-|       The entry point slog10 computes the base-10
-|	logarithm of an input argument X.
-|	slog10d does the same except the input value is a
-|	denormalized number.
-|	sLog2 and sLog2d are the base-2 analogues.
-|
-|       INPUT:	Double-extended value in memory location pointed to
-|		by address register a0.
-|
-|       OUTPUT: log_10(X) or log_2(X) returned in floating-point
-|		register fp0.
-|
-|       ACCURACY and MONOTONICITY: The returned result is within 1.7
-|		ulps in 64 significant bit, i.e. within 0.5003 ulp
-|		to 53 bits if the result is subsequently rounded
-|		to double precision. The result is provably monotonic
-|		in double precision.
-|
-|       SPEED:	Two timings are measured, both in the copy-back mode.
-|		The first one is measured when the function is invoked
-|		the first time (so the instructions and data are not
-|		in cache), and the second one is measured when the
-|		function is reinvoked at the same input argument.
-|
-|       ALGORITHM and IMPLEMENTATION NOTES:
-|
-|       slog10d:
-|
-|       Step 0.   If X < 0, create a NaN and raise the invalid operation
-|                 flag. Otherwise, save FPCR in D1; set FpCR to default.
-|       Notes:    Default means round-to-nearest mode, no floating-point
-|                 traps, and precision control = double extended.
-|
-|       Step 1.   Call slognd to obtain Y = log(X), the natural log of X.
-|       Notes:    Even if X is denormalized, log(X) is always normalized.
-|
-|       Step 2.   Compute log_10(X) = log(X) * (1/log(10)).
-|            2.1  Restore the user FPCR
-|            2.2  Return ans := Y * INV_L10.
-|
-|
-|       slog10:
-|
-|       Step 0.   If X < 0, create a NaN and raise the invalid operation
-|                 flag. Otherwise, save FPCR in D1; set FpCR to default.
-|       Notes:    Default means round-to-nearest mode, no floating-point
-|                 traps, and precision control = double extended.
-|
-|       Step 1.   Call sLogN to obtain Y = log(X), the natural log of X.
-|
-|       Step 2.   Compute log_10(X) = log(X) * (1/log(10)).
-|            2.1  Restore the user FPCR
-|            2.2  Return ans := Y * INV_L10.
-|
-|
-|       sLog2d:
-|
-|       Step 0.   If X < 0, create a NaN and raise the invalid operation
-|                 flag. Otherwise, save FPCR in D1; set FpCR to default.
-|       Notes:    Default means round-to-nearest mode, no floating-point
-|                 traps, and precision control = double extended.
-|
-|       Step 1.   Call slognd to obtain Y = log(X), the natural log of X.
-|       Notes:    Even if X is denormalized, log(X) is always normalized.
-|
-|       Step 2.   Compute log_10(X) = log(X) * (1/log(2)).
-|            2.1  Restore the user FPCR
-|            2.2  Return ans := Y * INV_L2.
-|
-|
-|       sLog2:
-|
-|       Step 0.   If X < 0, create a NaN and raise the invalid operation
-|                 flag. Otherwise, save FPCR in D1; set FpCR to default.
-|       Notes:    Default means round-to-nearest mode, no floating-point
-|                 traps, and precision control = double extended.
-|
-|       Step 1.   If X is not an integer power of two, i.e., X != 2^k,
-|                 go to Step 3.
-|
-|       Step 2.   Return k.
-|            2.1  Get integer k, X = 2^k.
-|            2.2  Restore the user FPCR.
-|            2.3  Return ans := convert-to-double-extended(k).
-|
-|       Step 3.   Call sLogN to obtain Y = log(X), the natural log of X.
-|
-|       Step 4.   Compute log_2(X) = log(X) * (1/log(2)).
-|            4.1  Restore the user FPCR
-|            4.2  Return ans := Y * INV_L2.
-|
-
-|		Copyright (C) Motorola, Inc. 1990
-|			All Rights Reserved
-|
-|       For details on the license for this file, please see the
-|       file, README, in this same directory.
-
-|SLOG2    idnt    2,1 | Motorola 040 Floating Point Software Package
-
-	|section	8
-
-	|xref	t_frcinx
-	|xref	t_operr
-	|xref	slogn
-	|xref	slognd
-
-INV_L10:  .long 0x3FFD0000,0xDE5BD8A9,0x37287195,0x00000000
-
-INV_L2:   .long 0x3FFF0000,0xB8AA3B29,0x5C17F0BC,0x00000000
-
-	.global	slog10d
-slog10d:
-|--entry point for Log10(X), X is denormalized
-	movel		(%a0),%d0
-	blt		invalid
-	movel		%d1,-(%sp)
-	clrl		%d1
-	bsr		slognd			| ...log(X), X denorm.
-	fmovel		(%sp)+,%fpcr
-	fmulx		INV_L10,%fp0
-	bra		t_frcinx
-
-	.global	slog10
-slog10:
-|--entry point for Log10(X), X is normalized
-
-	movel		(%a0),%d0
-	blt		invalid
-	movel		%d1,-(%sp)
-	clrl		%d1
-	bsr		slogn			| ...log(X), X normal.
-	fmovel		(%sp)+,%fpcr
-	fmulx		INV_L10,%fp0
-	bra		t_frcinx
-
-
-	.global	slog2d
-slog2d:
-|--entry point for Log2(X), X is denormalized
-
-	movel		(%a0),%d0
-	blt		invalid
-	movel		%d1,-(%sp)
-	clrl		%d1
-	bsr		slognd			| ...log(X), X denorm.
-	fmovel		(%sp)+,%fpcr
-	fmulx		INV_L2,%fp0
-	bra		t_frcinx
-
-	.global	slog2
-slog2:
-|--entry point for Log2(X), X is normalized
-	movel		(%a0),%d0
-	blt		invalid
-
-	movel		8(%a0),%d0
-	bnes		continue		| ...X is not 2^k
-
-	movel		4(%a0),%d0
-	andl		#0x7FFFFFFF,%d0
-	tstl		%d0
-	bnes		continue
-
-|--X = 2^k.
-	movew		(%a0),%d0
-	andl		#0x00007FFF,%d0
-	subl		#0x3FFF,%d0
-	fmovel		%d1,%fpcr
-	fmovel		%d0,%fp0
-	bra		t_frcinx
-
-continue:
-	movel		%d1,-(%sp)
-	clrl		%d1
-	bsr		slogn			| ...log(X), X normal.
-	fmovel		(%sp)+,%fpcr
-	fmulx		INV_L2,%fp0
-	bra		t_frcinx
-
-invalid:
-	bra		t_operr
-
-	|end
diff --git a/ANDROID_3.4.5/arch/m68k/fpsp040/slogn.S b/ANDROID_3.4.5/arch/m68k/fpsp040/slogn.S
deleted file mode 100644
index d98eaf64..00000000
--- a/ANDROID_3.4.5/arch/m68k/fpsp040/slogn.S
+++ /dev/null
@@ -1,591 +0,0 @@
-|
-|	slogn.sa 3.1 12/10/90
-|
-|	slogn computes the natural logarithm of an
-|	input value. slognd does the same except the input value is a
-|	denormalized number. slognp1 computes log(1+X), and slognp1d
-|	computes log(1+X) for denormalized X.
-|
-|	Input: Double-extended value in memory location pointed to by address
-|		register a0.
-|
-|	Output:	log(X) or log(1+X) returned in floating-point register Fp0.
-|
-|	Accuracy and Monotonicity: The returned result is within 2 ulps in
-|		64 significant bit, i.e. within 0.5001 ulp to 53 bits if the
-|		result is subsequently rounded to double precision. The
-|		result is provably monotonic in double precision.
-|
-|	Speed: The program slogn takes approximately 190 cycles for input
-|		argument X such that |X-1| >= 1/16, which is the usual
-|		situation. For those arguments, slognp1 takes approximately
-|		 210 cycles. For the less common arguments, the program will
-|		 run no worse than 10% slower.
-|
-|	Algorithm:
-|	LOGN:
-|	Step 1. If |X-1| < 1/16, approximate log(X) by an odd polynomial in
-|		u, where u = 2(X-1)/(X+1). Otherwise, move on to Step 2.
-|
-|	Step 2. X = 2**k * Y where 1 <= Y < 2. Define F to be the first seven
-|		significant bits of Y plus 2**(-7), i.e. F = 1.xxxxxx1 in base
-|		2 where the six "x" match those of Y. Note that |Y-F| <= 2**(-7).
-|
-|	Step 3. Define u = (Y-F)/F. Approximate log(1+u) by a polynomial in u,
-|		log(1+u) = poly.
-|
-|	Step 4. Reconstruct log(X) = log( 2**k * Y ) = k*log(2) + log(F) + log(1+u)
-|		by k*log(2) + (log(F) + poly). The values of log(F) are calculated
-|		beforehand and stored in the program.
-|
-|	lognp1:
-|	Step 1: If |X| < 1/16, approximate log(1+X) by an odd polynomial in
-|		u where u = 2X/(2+X). Otherwise, move on to Step 2.
-|
-|	Step 2: Let 1+X = 2**k * Y, where 1 <= Y < 2. Define F as done in Step 2
-|		of the algorithm for LOGN and compute log(1+X) as
-|		k*log(2) + log(F) + poly where poly approximates log(1+u),
-|		u = (Y-F)/F.
-|
-|	Implementation Notes:
-|	Note 1. There are 64 different possible values for F, thus 64 log(F)'s
-|		need to be tabulated. Moreover, the values of 1/F are also
-|		tabulated so that the division in (Y-F)/F can be performed by a
-|		multiplication.
-|
-|	Note 2. In Step 2 of lognp1, in order to preserved accuracy, the value
-|		Y-F has to be calculated carefully when 1/2 <= X < 3/2.
-|
-|	Note 3. To fully exploit the pipeline, polynomials are usually separated
-|		into two parts evaluated independently before being added up.
-|
-
-|		Copyright (C) Motorola, Inc. 1990
-|			All Rights Reserved
-|
-|       For details on the license for this file, please see the
-|       file, README, in this same directory.
-
-|slogn	idnt	2,1 | Motorola 040 Floating Point Software Package
-
-	|section	8
-
-#include "fpsp.h"
-
-BOUNDS1:  .long 0x3FFEF07D,0x3FFF8841
-BOUNDS2:  .long 0x3FFE8000,0x3FFFC000
-
-LOGOF2:	.long 0x3FFE0000,0xB17217F7,0xD1CF79AC,0x00000000
-
-one:	.long 0x3F800000
-zero:	.long 0x00000000
-infty:	.long 0x7F800000
-negone:	.long 0xBF800000
-
-LOGA6:	.long 0x3FC2499A,0xB5E4040B
-LOGA5:	.long 0xBFC555B5,0x848CB7DB
-
-LOGA4:	.long 0x3FC99999,0x987D8730
-LOGA3:	.long 0xBFCFFFFF,0xFF6F7E97
-
-LOGA2:	.long 0x3FD55555,0x555555a4
-LOGA1:	.long 0xBFE00000,0x00000008
-
-LOGB5:	.long 0x3F175496,0xADD7DAD6
-LOGB4:	.long 0x3F3C71C2,0xFE80C7E0
-
-LOGB3:	.long 0x3F624924,0x928BCCFF
-LOGB2:	.long 0x3F899999,0x999995EC
-
-LOGB1:	.long 0x3FB55555,0x55555555
-TWO:	.long 0x40000000,0x00000000
-
-LTHOLD:	.long 0x3f990000,0x80000000,0x00000000,0x00000000
-
-LOGTBL:
-	.long  0x3FFE0000,0xFE03F80F,0xE03F80FE,0x00000000
-	.long  0x3FF70000,0xFF015358,0x833C47E2,0x00000000
-	.long  0x3FFE0000,0xFA232CF2,0x52138AC0,0x00000000
-	.long  0x3FF90000,0xBDC8D83E,0xAD88D549,0x00000000
-	.long  0x3FFE0000,0xF6603D98,0x0F6603DA,0x00000000
-	.long  0x3FFA0000,0x9CF43DCF,0xF5EAFD48,0x00000000
-	.long  0x3FFE0000,0xF2B9D648,0x0F2B9D65,0x00000000
-	.long  0x3FFA0000,0xDA16EB88,0xCB8DF614,0x00000000
-	.long  0x3FFE0000,0xEF2EB71F,0xC4345238,0x00000000
-	.long  0x3FFB0000,0x8B29B775,0x1BD70743,0x00000000
-	.long  0x3FFE0000,0xEBBDB2A5,0xC1619C8C,0x00000000
-	.long  0x3FFB0000,0xA8D839F8,0x30C1FB49,0x00000000
-	.long  0x3FFE0000,0xE865AC7B,0x7603A197,0x00000000
-	.long  0x3FFB0000,0xC61A2EB1,0x8CD907AD,0x00000000
-	.long  0x3FFE0000,0xE525982A,0xF70C880E,0x00000000
-	.long  0x3FFB0000,0xE2F2A47A,0xDE3A18AF,0x00000000
-	.long  0x3FFE0000,0xE1FC780E,0x1FC780E2,0x00000000
-	.long  0x3FFB0000,0xFF64898E,0xDF55D551,0x00000000
-	.long  0x3FFE0000,0xDEE95C4C,0xA037BA57,0x00000000
-	.long  0x3FFC0000,0x8DB956A9,0x7B3D0148,0x00000000
-	.long  0x3FFE0000,0xDBEB61EE,0xD19C5958,0x00000000
-	.long  0x3FFC0000,0x9B8FE100,0xF47BA1DE,0x00000000
-	.long  0x3FFE0000,0xD901B203,0x6406C80E,0x00000000
-	.long  0x3FFC0000,0xA9372F1D,0x0DA1BD17,0x00000000
-	.long  0x3FFE0000,0xD62B80D6,0x2B80D62C,0x00000000
-	.long  0x3FFC0000,0xB6B07F38,0xCE90E46B,0x00000000
-	.long  0x3FFE0000,0xD3680D36,0x80D3680D,0x00000000
-	.long  0x3FFC0000,0xC3FD0329,0x06488481,0x00000000
-	.long  0x3FFE0000,0xD0B69FCB,0xD2580D0B,0x00000000
-	.long  0x3FFC0000,0xD11DE0FF,0x15AB18CA,0x00000000
-	.long  0x3FFE0000,0xCE168A77,0x25080CE1,0x00000000
-	.long  0x3FFC0000,0xDE1433A1,0x6C66B150,0x00000000
-	.long  0x3FFE0000,0xCB8727C0,0x65C393E0,0x00000000
-	.long  0x3FFC0000,0xEAE10B5A,0x7DDC8ADD,0x00000000
-	.long  0x3FFE0000,0xC907DA4E,0x871146AD,0x00000000
-	.long  0x3FFC0000,0xF7856E5E,0xE2C9B291,0x00000000
-	.long  0x3FFE0000,0xC6980C69,0x80C6980C,0x00000000
-	.long  0x3FFD0000,0x82012CA5,0xA68206D7,0x00000000
-	.long  0x3FFE0000,0xC4372F85,0x5D824CA6,0x00000000
-	.long  0x3FFD0000,0x882C5FCD,0x7256A8C5,0x00000000
-	.long  0x3FFE0000,0xC1E4BBD5,0x95F6E947,0x00000000
-	.long  0x3FFD0000,0x8E44C60B,0x4CCFD7DE,0x00000000
-	.long  0x3FFE0000,0xBFA02FE8,0x0BFA02FF,0x00000000
-	.long  0x3FFD0000,0x944AD09E,0xF4351AF6,0x00000000
-	.long  0x3FFE0000,0xBD691047,0x07661AA3,0x00000000
-	.long  0x3FFD0000,0x9A3EECD4,0xC3EAA6B2,0x00000000
-	.long  0x3FFE0000,0xBB3EE721,0xA54D880C,0x00000000
-	.long  0x3FFD0000,0xA0218434,0x353F1DE8,0x00000000
-	.long  0x3FFE0000,0xB92143FA,0x36F5E02E,0x00000000
-	.long  0x3FFD0000,0xA5F2FCAB,0xBBC506DA,0x00000000
-	.long  0x3FFE0000,0xB70FBB5A,0x19BE3659,0x00000000
-	.long  0x3FFD0000,0xABB3B8BA,0x2AD362A5,0x00000000
-	.long  0x3FFE0000,0xB509E68A,0x9B94821F,0x00000000
-	.long  0x3FFD0000,0xB1641795,0xCE3CA97B,0x00000000
-	.long  0x3FFE0000,0xB30F6352,0x8917C80B,0x00000000
-	.long  0x3FFD0000,0xB7047551,0x5D0F1C61,0x00000000
-	.long  0x3FFE0000,0xB11FD3B8,0x0B11FD3C,0x00000000
-	.long  0x3FFD0000,0xBC952AFE,0xEA3D13E1,0x00000000
-	.long  0x3FFE0000,0xAF3ADDC6,0x80AF3ADE,0x00000000
-	.long  0x3FFD0000,0xC2168ED0,0xF458BA4A,0x00000000
-	.long  0x3FFE0000,0xAD602B58,0x0AD602B6,0x00000000
-	.long  0x3FFD0000,0xC788F439,0xB3163BF1,0x00000000
-	.long  0x3FFE0000,0xAB8F69E2,0x8359CD11,0x00000000
-	.long  0x3FFD0000,0xCCECAC08,0xBF04565D,0x00000000
-	.long  0x3FFE0000,0xA9C84A47,0xA07F5638,0x00000000
-	.long  0x3FFD0000,0xD2420487,0x2DD85160,0x00000000
-	.long  0x3FFE0000,0xA80A80A8,0x0A80A80B,0x00000000
-	.long  0x3FFD0000,0xD7894992,0x3BC3588A,0x00000000
-	.long  0x3FFE0000,0xA655C439,0x2D7B73A8,0x00000000
-	.long  0x3FFD0000,0xDCC2C4B4,0x9887DACC,0x00000000
-	.long  0x3FFE0000,0xA4A9CF1D,0x96833751,0x00000000
-	.long  0x3FFD0000,0xE1EEBD3E,0x6D6A6B9E,0x00000000
-	.long  0x3FFE0000,0xA3065E3F,0xAE7CD0E0,0x00000000
-	.long  0x3FFD0000,0xE70D785C,0x2F9F5BDC,0x00000000
-	.long  0x3FFE0000,0xA16B312E,0xA8FC377D,0x00000000
-	.long  0x3FFD0000,0xEC1F392C,0x5179F283,0x00000000
-	.long  0x3FFE0000,0x9FD809FD,0x809FD80A,0x00000000
-	.long  0x3FFD0000,0xF12440D3,0xE36130E6,0x00000000
-	.long  0x3FFE0000,0x9E4CAD23,0xDD5F3A20,0x00000000
-	.long  0x3FFD0000,0xF61CCE92,0x346600BB,0x00000000
-	.long  0x3FFE0000,0x9CC8E160,0xC3FB19B9,0x00000000
-	.long  0x3FFD0000,0xFB091FD3,0x8145630A,0x00000000
-	.long  0x3FFE0000,0x9B4C6F9E,0xF03A3CAA,0x00000000
-	.long  0x3FFD0000,0xFFE97042,0xBFA4C2AD,0x00000000
-	.long  0x3FFE0000,0x99D722DA,0xBDE58F06,0x00000000
-	.long  0x3FFE0000,0x825EFCED,0x49369330,0x00000000
-	.long  0x3FFE0000,0x9868C809,0x868C8098,0x00000000
-	.long  0x3FFE0000,0x84C37A7A,0xB9A905C9,0x00000000
-	.long  0x3FFE0000,0x97012E02,0x5C04B809,0x00000000
-	.long  0x3FFE0000,0x87224C2E,0x8E645FB7,0x00000000
-	.long  0x3FFE0000,0x95A02568,0x095A0257,0x00000000
-	.long  0x3FFE0000,0x897B8CAC,0x9F7DE298,0x00000000
-	.long  0x3FFE0000,0x94458094,0x45809446,0x00000000
-	.long  0x3FFE0000,0x8BCF55DE,0xC4CD05FE,0x00000000
-	.long  0x3FFE0000,0x92F11384,0x0497889C,0x00000000
-	.long  0x3FFE0000,0x8E1DC0FB,0x89E125E5,0x00000000
-	.long  0x3FFE0000,0x91A2B3C4,0xD5E6F809,0x00000000
-	.long  0x3FFE0000,0x9066E68C,0x955B6C9B,0x00000000
-	.long  0x3FFE0000,0x905A3863,0x3E06C43B,0x00000000
-	.long  0x3FFE0000,0x92AADE74,0xC7BE59E0,0x00000000
-	.long  0x3FFE0000,0x8F1779D9,0xFDC3A219,0x00000000
-	.long  0x3FFE0000,0x94E9BFF6,0x15845643,0x00000000
-	.long  0x3FFE0000,0x8DDA5202,0x37694809,0x00000000
-	.long  0x3FFE0000,0x9723A1B7,0x20134203,0x00000000
-	.long  0x3FFE0000,0x8CA29C04,0x6514E023,0x00000000
-	.long  0x3FFE0000,0x995899C8,0x90EB8990,0x00000000
-	.long  0x3FFE0000,0x8B70344A,0x139BC75A,0x00000000
-	.long  0x3FFE0000,0x9B88BDAA,0x3A3DAE2F,0x00000000
-	.long  0x3FFE0000,0x8A42F870,0x5669DB46,0x00000000
-	.long  0x3FFE0000,0x9DB4224F,0xFFE1157C,0x00000000
-	.long  0x3FFE0000,0x891AC73A,0xE9819B50,0x00000000
-	.long  0x3FFE0000,0x9FDADC26,0x8B7A12DA,0x00000000
-	.long  0x3FFE0000,0x87F78087,0xF78087F8,0x00000000
-	.long  0x3FFE0000,0xA1FCFF17,0xCE733BD4,0x00000000
-	.long  0x3FFE0000,0x86D90544,0x7A34ACC6,0x00000000
-	.long  0x3FFE0000,0xA41A9E8F,0x5446FB9F,0x00000000
-	.long  0x3FFE0000,0x85BF3761,0x2CEE3C9B,0x00000000
-	.long  0x3FFE0000,0xA633CD7E,0x6771CD8B,0x00000000
-	.long  0x3FFE0000,0x84A9F9C8,0x084A9F9D,0x00000000
-	.long  0x3FFE0000,0xA8489E60,0x0B435A5E,0x00000000
-	.long  0x3FFE0000,0x83993052,0x3FBE3368,0x00000000
-	.long  0x3FFE0000,0xAA59233C,0xCCA4BD49,0x00000000
-	.long  0x3FFE0000,0x828CBFBE,0xB9A020A3,0x00000000
-	.long  0x3FFE0000,0xAC656DAE,0x6BCC4985,0x00000000
-	.long  0x3FFE0000,0x81848DA8,0xFAF0D277,0x00000000
-	.long  0x3FFE0000,0xAE6D8EE3,0x60BB2468,0x00000000
-	.long  0x3FFE0000,0x80808080,0x80808081,0x00000000
-	.long  0x3FFE0000,0xB07197A2,0x3C46C654,0x00000000
-
-	.set	ADJK,L_SCR1
-
-	.set	X,FP_SCR1
-	.set	XDCARE,X+2
-	.set	XFRAC,X+4
-
-	.set	F,FP_SCR2
-	.set	FFRAC,F+4
-
-	.set	KLOG2,FP_SCR3
-
-	.set	SAVEU,FP_SCR4
-
-	| xref	t_frcinx
-	|xref	t_extdnrm
-	|xref	t_operr
-	|xref	t_dz
-
-	.global	slognd
-slognd:
-|--ENTRY POINT FOR LOG(X) FOR DENORMALIZED INPUT
-
-	movel		#-100,ADJK(%a6)	| ...INPUT = 2^(ADJK) * FP0
-
-|----normalize the input value by left shifting k bits (k to be determined
-|----below), adjusting exponent and storing -k to  ADJK
-|----the value TWOTO100 is no longer needed.
-|----Note that this code assumes the denormalized input is NON-ZERO.
-
-     moveml	%d2-%d7,-(%a7)		| ...save some registers
-     movel	#0x00000000,%d3		| ...D3 is exponent of smallest norm. #
-     movel	4(%a0),%d4
-     movel	8(%a0),%d5		| ...(D4,D5) is (Hi_X,Lo_X)
-     clrl	%d2			| ...D2 used for holding K
-
-     tstl	%d4
-     bnes	HiX_not0
-
-HiX_0:
-     movel	%d5,%d4
-     clrl	%d5
-     movel	#32,%d2
-     clrl	%d6
-     bfffo      %d4{#0:#32},%d6
-     lsll      %d6,%d4
-     addl	%d6,%d2			| ...(D3,D4,D5) is normalized
-
-     movel	%d3,X(%a6)
-     movel	%d4,XFRAC(%a6)
-     movel	%d5,XFRAC+4(%a6)
-     negl	%d2
-     movel	%d2,ADJK(%a6)
-     fmovex	X(%a6),%fp0
-     moveml	(%a7)+,%d2-%d7		| ...restore registers
-     lea	X(%a6),%a0
-     bras	LOGBGN			| ...begin regular log(X)
-
-
-HiX_not0:
-     clrl	%d6
-     bfffo	%d4{#0:#32},%d6		| ...find first 1
-     movel	%d6,%d2			| ...get k
-     lsll	%d6,%d4
-     movel	%d5,%d7			| ...a copy of D5
-     lsll	%d6,%d5
-     negl	%d6
-     addil	#32,%d6
-     lsrl	%d6,%d7
-     orl	%d7,%d4			| ...(D3,D4,D5) normalized
-
-     movel	%d3,X(%a6)
-     movel	%d4,XFRAC(%a6)
-     movel	%d5,XFRAC+4(%a6)
-     negl	%d2
-     movel	%d2,ADJK(%a6)
-     fmovex	X(%a6),%fp0
-     moveml	(%a7)+,%d2-%d7		| ...restore registers
-     lea	X(%a6),%a0
-     bras	LOGBGN			| ...begin regular log(X)
-
-
-	.global	slogn
-slogn:
-|--ENTRY POINT FOR LOG(X) FOR X FINITE, NON-ZERO, NOT NAN'S
-
-	fmovex		(%a0),%fp0	| ...LOAD INPUT
-	movel		#0x00000000,ADJK(%a6)
-
-LOGBGN:
-|--FPCR SAVED AND CLEARED, INPUT IS 2^(ADJK)*FP0, FP0 CONTAINS
-|--A FINITE, NON-ZERO, NORMALIZED NUMBER.
-
-	movel	(%a0),%d0
-	movew	4(%a0),%d0
-
-	movel	(%a0),X(%a6)
-	movel	4(%a0),X+4(%a6)
-	movel	8(%a0),X+8(%a6)
-
-	cmpil	#0,%d0		| ...CHECK IF X IS NEGATIVE
-	blt	LOGNEG		| ...LOG OF NEGATIVE ARGUMENT IS INVALID
-	cmp2l	BOUNDS1,%d0	| ...X IS POSITIVE, CHECK IF X IS NEAR 1
-	bcc	LOGNEAR1	| ...BOUNDS IS ROUGHLY [15/16, 17/16]
-
-LOGMAIN:
-|--THIS SHOULD BE THE USUAL CASE, X NOT VERY CLOSE TO 1
-
-|--X = 2^(K) * Y, 1 <= Y < 2. THUS, Y = 1.XXXXXXXX....XX IN BINARY.
-|--WE DEFINE F = 1.XXXXXX1, I.E. FIRST 7 BITS OF Y AND ATTACH A 1.
-|--THE IDEA IS THAT LOG(X) = K*LOG2 + LOG(Y)
-|--			 = K*LOG2 + LOG(F) + LOG(1 + (Y-F)/F).
-|--NOTE THAT U = (Y-F)/F IS VERY SMALL AND THUS APPROXIMATING
-|--LOG(1+U) CAN BE VERY EFFICIENT.
-|--ALSO NOTE THAT THE VALUE 1/F IS STORED IN A TABLE SO THAT NO
-|--DIVISION IS NEEDED TO CALCULATE (Y-F)/F.
-
-|--GET K, Y, F, AND ADDRESS OF 1/F.
-	asrl	#8,%d0
-	asrl	#8,%d0		| ...SHIFTED 16 BITS, BIASED EXPO. OF X
-	subil	#0x3FFF,%d0	| ...THIS IS K
-	addl	ADJK(%a6),%d0	| ...ADJUST K, ORIGINAL INPUT MAY BE  DENORM.
-	lea	LOGTBL,%a0	| ...BASE ADDRESS OF 1/F AND LOG(F)
-	fmovel	%d0,%fp1		| ...CONVERT K TO FLOATING-POINT FORMAT
-
-|--WHILE THE CONVERSION IS GOING ON, WE GET F AND ADDRESS OF 1/F
-	movel	#0x3FFF0000,X(%a6)	| ...X IS NOW Y, I.E. 2^(-K)*X
-	movel	XFRAC(%a6),FFRAC(%a6)
-	andil	#0xFE000000,FFRAC(%a6) | ...FIRST 7 BITS OF Y
-	oril	#0x01000000,FFRAC(%a6) | ...GET F: ATTACH A 1 AT THE EIGHTH BIT
-	movel	FFRAC(%a6),%d0	| ...READY TO GET ADDRESS OF 1/F
-	andil	#0x7E000000,%d0
-	asrl	#8,%d0
-	asrl	#8,%d0
-	asrl	#4,%d0		| ...SHIFTED 20, D0 IS THE DISPLACEMENT
-	addal	%d0,%a0		| ...A0 IS THE ADDRESS FOR 1/F
-
-	fmovex	X(%a6),%fp0
-	movel	#0x3fff0000,F(%a6)
-	clrl	F+8(%a6)
-	fsubx	F(%a6),%fp0		| ...Y-F
-	fmovemx %fp2-%fp2/%fp3,-(%sp)	| ...SAVE FP2 WHILE FP0 IS NOT READY
-|--SUMMARY: FP0 IS Y-F, A0 IS ADDRESS OF 1/F, FP1 IS K
-|--REGISTERS SAVED: FPCR, FP1, FP2
-
-LP1CONT1:
-|--AN RE-ENTRY POINT FOR LOGNP1
-	fmulx	(%a0),%fp0	| ...FP0 IS U = (Y-F)/F
-	fmulx	LOGOF2,%fp1	| ...GET K*LOG2 WHILE FP0 IS NOT READY
-	fmovex	%fp0,%fp2
-	fmulx	%fp2,%fp2		| ...FP2 IS V=U*U
-	fmovex	%fp1,KLOG2(%a6)	| ...PUT K*LOG2 IN MEMORY, FREE FP1
-
-|--LOG(1+U) IS APPROXIMATED BY
-|--U + V*(A1+U*(A2+U*(A3+U*(A4+U*(A5+U*A6))))) WHICH IS
-|--[U + V*(A1+V*(A3+V*A5))]  +  [U*V*(A2+V*(A4+V*A6))]
-
-	fmovex	%fp2,%fp3
-	fmovex	%fp2,%fp1
-
-	fmuld	LOGA6,%fp1	| ...V*A6
-	fmuld	LOGA5,%fp2	| ...V*A5
-
-	faddd	LOGA4,%fp1	| ...A4+V*A6
-	faddd	LOGA3,%fp2	| ...A3+V*A5
-
-	fmulx	%fp3,%fp1		| ...V*(A4+V*A6)
-	fmulx	%fp3,%fp2		| ...V*(A3+V*A5)
-
-	faddd	LOGA2,%fp1	| ...A2+V*(A4+V*A6)
-	faddd	LOGA1,%fp2	| ...A1+V*(A3+V*A5)
-
-	fmulx	%fp3,%fp1		| ...V*(A2+V*(A4+V*A6))
-	addal	#16,%a0		| ...ADDRESS OF LOG(F)
-	fmulx	%fp3,%fp2		| ...V*(A1+V*(A3+V*A5)), FP3 RELEASED
-
-	fmulx	%fp0,%fp1		| ...U*V*(A2+V*(A4+V*A6))
-	faddx	%fp2,%fp0		| ...U+V*(A1+V*(A3+V*A5)), FP2 RELEASED
-
-	faddx	(%a0),%fp1	| ...LOG(F)+U*V*(A2+V*(A4+V*A6))
-	fmovemx  (%sp)+,%fp2-%fp2/%fp3	| ...RESTORE FP2
-	faddx	%fp1,%fp0		| ...FP0 IS LOG(F) + LOG(1+U)
-
-	fmovel	%d1,%fpcr
-	faddx	KLOG2(%a6),%fp0	| ...FINAL ADD
-	bra	t_frcinx
-
-
-LOGNEAR1:
-|--REGISTERS SAVED: FPCR, FP1. FP0 CONTAINS THE INPUT.
-	fmovex	%fp0,%fp1
-	fsubs	one,%fp1		| ...FP1 IS X-1
-	fadds	one,%fp0		| ...FP0 IS X+1
-	faddx	%fp1,%fp1		| ...FP1 IS 2(X-1)
-|--LOG(X) = LOG(1+U/2)-LOG(1-U/2) WHICH IS AN ODD POLYNOMIAL
-|--IN U, U = 2(X-1)/(X+1) = FP1/FP0
-
-LP1CONT2:
-|--THIS IS AN RE-ENTRY POINT FOR LOGNP1
-	fdivx	%fp0,%fp1		| ...FP1 IS U
-	fmovemx %fp2-%fp2/%fp3,-(%sp)	 | ...SAVE FP2
-|--REGISTERS SAVED ARE NOW FPCR,FP1,FP2,FP3
-|--LET V=U*U, W=V*V, CALCULATE
-|--U + U*V*(B1 + V*(B2 + V*(B3 + V*(B4 + V*B5)))) BY
-|--U + U*V*(  [B1 + W*(B3 + W*B5)]  +  [V*(B2 + W*B4)]  )
-	fmovex	%fp1,%fp0
-	fmulx	%fp0,%fp0	| ...FP0 IS V
-	fmovex	%fp1,SAVEU(%a6) | ...STORE U IN MEMORY, FREE FP1
-	fmovex	%fp0,%fp1
-	fmulx	%fp1,%fp1	| ...FP1 IS W
-
-	fmoved	LOGB5,%fp3
-	fmoved	LOGB4,%fp2
-
-	fmulx	%fp1,%fp3	| ...W*B5
-	fmulx	%fp1,%fp2	| ...W*B4
-
-	faddd	LOGB3,%fp3 | ...B3+W*B5
-	faddd	LOGB2,%fp2 | ...B2+W*B4
-
-	fmulx	%fp3,%fp1	| ...W*(B3+W*B5), FP3 RELEASED
-
-	fmulx	%fp0,%fp2	| ...V*(B2+W*B4)
-
-	faddd	LOGB1,%fp1 | ...B1+W*(B3+W*B5)
-	fmulx	SAVEU(%a6),%fp0 | ...FP0 IS U*V
-
-	faddx	%fp2,%fp1	| ...B1+W*(B3+W*B5) + V*(B2+W*B4), FP2 RELEASED
-	fmovemx (%sp)+,%fp2-%fp2/%fp3 | ...FP2 RESTORED
-
-	fmulx	%fp1,%fp0	| ...U*V*( [B1+W*(B3+W*B5)] + [V*(B2+W*B4)] )
-
-	fmovel	%d1,%fpcr
-	faddx	SAVEU(%a6),%fp0
-	bra	t_frcinx
-	rts
-
-LOGNEG:
-|--REGISTERS SAVED FPCR. LOG(-VE) IS INVALID
-	bra	t_operr
-
-	.global	slognp1d
-slognp1d:
-|--ENTRY POINT FOR LOG(1+Z) FOR DENORMALIZED INPUT
-| Simply return the denorm
-
-	bra	t_extdnrm
-
-	.global	slognp1
-slognp1:
-|--ENTRY POINT FOR LOG(1+X) FOR X FINITE, NON-ZERO, NOT NAN'S
-
-	fmovex	(%a0),%fp0	| ...LOAD INPUT
-	fabsx	%fp0		|test magnitude
-	fcmpx	LTHOLD,%fp0	|compare with min threshold
-	fbgt	LP1REAL		|if greater, continue
-	fmovel	#0,%fpsr		|clr N flag from compare
-	fmovel	%d1,%fpcr
-	fmovex	(%a0),%fp0	|return signed argument
-	bra	t_frcinx
-
-LP1REAL:
-	fmovex	(%a0),%fp0	| ...LOAD INPUT
-	movel	#0x00000000,ADJK(%a6)
-	fmovex	%fp0,%fp1	| ...FP1 IS INPUT Z
-	fadds	one,%fp0	| ...X := ROUND(1+Z)
-	fmovex	%fp0,X(%a6)
-	movew	XFRAC(%a6),XDCARE(%a6)
-	movel	X(%a6),%d0
-	cmpil	#0,%d0
-	ble	LP1NEG0	| ...LOG OF ZERO OR -VE
-	cmp2l	BOUNDS2,%d0
-	bcs	LOGMAIN	| ...BOUNDS2 IS [1/2,3/2]
-|--IF 1+Z > 3/2 OR 1+Z < 1/2, THEN X, WHICH IS ROUNDING 1+Z,
-|--CONTAINS AT LEAST 63 BITS OF INFORMATION OF Z. IN THAT CASE,
-|--SIMPLY INVOKE LOG(X) FOR LOG(1+Z).
-
-LP1NEAR1:
-|--NEXT SEE IF EXP(-1/16) < X < EXP(1/16)
-	cmp2l	BOUNDS1,%d0
-	bcss	LP1CARE
-
-LP1ONE16:
-|--EXP(-1/16) < X < EXP(1/16). LOG(1+Z) = LOG(1+U/2) - LOG(1-U/2)
-|--WHERE U = 2Z/(2+Z) = 2Z/(1+X).
-	faddx	%fp1,%fp1	| ...FP1 IS 2Z
-	fadds	one,%fp0	| ...FP0 IS 1+X
-|--U = FP1/FP0
-	bra	LP1CONT2
-
-LP1CARE:
-|--HERE WE USE THE USUAL TABLE DRIVEN APPROACH. CARE HAS TO BE
-|--TAKEN BECAUSE 1+Z CAN HAVE 67 BITS OF INFORMATION AND WE MUST
-|--PRESERVE ALL THE INFORMATION. BECAUSE 1+Z IS IN [1/2,3/2],
-|--THERE ARE ONLY TWO CASES.
-|--CASE 1: 1+Z < 1, THEN K = -1 AND Y-F = (2-F) + 2Z
-|--CASE 2: 1+Z > 1, THEN K = 0  AND Y-F = (1-F) + Z
-|--ON RETURNING TO LP1CONT1, WE MUST HAVE K IN FP1, ADDRESS OF
-|--(1/F) IN A0, Y-F IN FP0, AND FP2 SAVED.
-
-	movel	XFRAC(%a6),FFRAC(%a6)
-	andil	#0xFE000000,FFRAC(%a6)
-	oril	#0x01000000,FFRAC(%a6)	| ...F OBTAINED
-	cmpil	#0x3FFF8000,%d0	| ...SEE IF 1+Z > 1
-	bges	KISZERO
-
-KISNEG1:
-	fmoves	TWO,%fp0
-	movel	#0x3fff0000,F(%a6)
-	clrl	F+8(%a6)
-	fsubx	F(%a6),%fp0	| ...2-F
-	movel	FFRAC(%a6),%d0
-	andil	#0x7E000000,%d0
-	asrl	#8,%d0
-	asrl	#8,%d0
-	asrl	#4,%d0		| ...D0 CONTAINS DISPLACEMENT FOR 1/F
-	faddx	%fp1,%fp1		| ...GET 2Z
-	fmovemx %fp2-%fp2/%fp3,-(%sp)	| ...SAVE FP2
-	faddx	%fp1,%fp0		| ...FP0 IS Y-F = (2-F)+2Z
-	lea	LOGTBL,%a0	| ...A0 IS ADDRESS OF 1/F
-	addal	%d0,%a0
-	fmoves	negone,%fp1	| ...FP1 IS K = -1
-	bra	LP1CONT1
-
-KISZERO:
-	fmoves	one,%fp0
-	movel	#0x3fff0000,F(%a6)
-	clrl	F+8(%a6)
-	fsubx	F(%a6),%fp0		| ...1-F
-	movel	FFRAC(%a6),%d0
-	andil	#0x7E000000,%d0
-	asrl	#8,%d0
-	asrl	#8,%d0
-	asrl	#4,%d0
-	faddx	%fp1,%fp0		| ...FP0 IS Y-F
-	fmovemx %fp2-%fp2/%fp3,-(%sp)	| ...FP2 SAVED
-	lea	LOGTBL,%a0
-	addal	%d0,%a0		| ...A0 IS ADDRESS OF 1/F
-	fmoves	zero,%fp1	| ...FP1 IS K = 0
-	bra	LP1CONT1
-
-LP1NEG0:
-|--FPCR SAVED. D0 IS X IN COMPACT FORM.
-	cmpil	#0,%d0
-	blts	LP1NEG
-LP1ZERO:
-	fmoves	negone,%fp0
-
-	fmovel	%d1,%fpcr
-	bra t_dz
-
-LP1NEG:
-	fmoves	zero,%fp0
-
-	fmovel	%d1,%fpcr
-	bra	t_operr
-
-	|end
diff --git a/ANDROID_3.4.5/arch/m68k/fpsp040/smovecr.S b/ANDROID_3.4.5/arch/m68k/fpsp040/smovecr.S
deleted file mode 100644
index 73c36512..00000000
--- a/ANDROID_3.4.5/arch/m68k/fpsp040/smovecr.S
+++ /dev/null
@@ -1,161 +0,0 @@
-|
-|	smovecr.sa 3.1 12/10/90
-|
-|	The entry point sMOVECR returns the constant at the
-|	offset given in the instruction field.
-|
-|	Input: An offset in the instruction word.
-|
-|	Output:	The constant rounded to the user's rounding
-|		mode unchecked for overflow.
-|
-|	Modified: fp0.
-|
-|
-|		Copyright (C) Motorola, Inc. 1990
-|			All Rights Reserved
-|
-|       For details on the license for this file, please see the
-|       file, README, in this same directory.
-
-|SMOVECR	idnt	2,1 | Motorola 040 Floating Point Software Package
-
-	|section 8
-
-#include "fpsp.h"
-
-	|xref	nrm_set
-	|xref	round
-	|xref	PIRN
-	|xref	PIRZRM
-	|xref	PIRP
-	|xref	SMALRN
-	|xref	SMALRZRM
-	|xref	SMALRP
-	|xref	BIGRN
-	|xref	BIGRZRM
-	|xref	BIGRP
-
-FZERO:	.long	00000000
-|
-|	FMOVECR
-|
-	.global	smovcr
-smovcr:
-	bfextu	CMDREG1B(%a6){#9:#7},%d0 |get offset
-	bfextu	USER_FPCR(%a6){#26:#2},%d1 |get rmode
-|
-| check range of offset
-|
-	tstb	%d0		|if zero, offset is to pi
-	beqs	PI_TBL		|it is pi
-	cmpib	#0x0a,%d0		|check range $01 - $0a
-	bles	Z_VAL		|if in this range, return zero
-	cmpib	#0x0e,%d0		|check range $0b - $0e
-	bles	SM_TBL		|valid constants in this range
-	cmpib	#0x2f,%d0		|check range $10 - $2f
-	bles	Z_VAL		|if in this range, return zero
-	cmpib	#0x3f,%d0		|check range $30 - $3f
-	ble	BG_TBL		|valid constants in this range
-Z_VAL:
-	fmoves	FZERO,%fp0
-	rts
-PI_TBL:
-	tstb	%d1		|offset is zero, check for rmode
-	beqs	PI_RN		|if zero, rn mode
-	cmpib	#0x3,%d1		|check for rp
-	beqs	PI_RP		|if 3, rp mode
-PI_RZRM:
-	leal	PIRZRM,%a0	|rmode is rz or rm, load PIRZRM in a0
-	bra	set_finx
-PI_RN:
-	leal	PIRN,%a0		|rmode is rn, load PIRN in a0
-	bra	set_finx
-PI_RP:
-	leal	PIRP,%a0		|rmode is rp, load PIRP in a0
-	bra	set_finx
-SM_TBL:
-	subil	#0xb,%d0		|make offset in 0 - 4 range
-	tstb	%d1		|check for rmode
-	beqs	SM_RN		|if zero, rn mode
-	cmpib	#0x3,%d1		|check for rp
-	beqs	SM_RP		|if 3, rp mode
-SM_RZRM:
-	leal	SMALRZRM,%a0	|rmode is rz or rm, load SMRZRM in a0
-	cmpib	#0x2,%d0		|check if result is inex
-	ble	set_finx	|if 0 - 2, it is inexact
-	bra	no_finx		|if 3, it is exact
-SM_RN:
-	leal	SMALRN,%a0	|rmode is rn, load SMRN in a0
-	cmpib	#0x2,%d0		|check if result is inex
-	ble	set_finx	|if 0 - 2, it is inexact
-	bra	no_finx		|if 3, it is exact
-SM_RP:
-	leal	SMALRP,%a0	|rmode is rp, load SMRP in a0
-	cmpib	#0x2,%d0		|check if result is inex
-	ble	set_finx	|if 0 - 2, it is inexact
-	bra	no_finx		|if 3, it is exact
-BG_TBL:
-	subil	#0x30,%d0		|make offset in 0 - f range
-	tstb	%d1		|check for rmode
-	beqs	BG_RN		|if zero, rn mode
-	cmpib	#0x3,%d1		|check for rp
-	beqs	BG_RP		|if 3, rp mode
-BG_RZRM:
-	leal	BIGRZRM,%a0	|rmode is rz or rm, load BGRZRM in a0
-	cmpib	#0x1,%d0		|check if result is inex
-	ble	set_finx	|if 0 - 1, it is inexact
-	cmpib	#0x7,%d0		|second check
-	ble	no_finx		|if 0 - 7, it is exact
-	bra	set_finx	|if 8 - f, it is inexact
-BG_RN:
-	leal	BIGRN,%a0	|rmode is rn, load BGRN in a0
-	cmpib	#0x1,%d0		|check if result is inex
-	ble	set_finx	|if 0 - 1, it is inexact
-	cmpib	#0x7,%d0		|second check
-	ble	no_finx		|if 0 - 7, it is exact
-	bra	set_finx	|if 8 - f, it is inexact
-BG_RP:
-	leal	BIGRP,%a0	|rmode is rp, load SMRP in a0
-	cmpib	#0x1,%d0		|check if result is inex
-	ble	set_finx	|if 0 - 1, it is inexact
-	cmpib	#0x7,%d0		|second check
-	ble	no_finx		|if 0 - 7, it is exact
-|	bra	set_finx	;if 8 - f, it is inexact
-set_finx:
-	orl	#inx2a_mask,USER_FPSR(%a6) |set inex2/ainex
-no_finx:
-	mulul	#12,%d0			|use offset to point into tables
-	movel	%d1,L_SCR1(%a6)		|load mode for round call
-	bfextu	USER_FPCR(%a6){#24:#2},%d1	|get precision
-	tstl	%d1			|check if extended precision
-|
-| Precision is extended
-|
-	bnes	not_ext			|if extended, do not call round
-	fmovemx (%a0,%d0),%fp0-%fp0		|return result in fp0
-	rts
-|
-| Precision is single or double
-|
-not_ext:
-	swap	%d1			|rnd prec in upper word of d1
-	addl	L_SCR1(%a6),%d1		|merge rmode in low word of d1
-	movel	(%a0,%d0),FP_SCR1(%a6)	|load first word to temp storage
-	movel	4(%a0,%d0),FP_SCR1+4(%a6)	|load second word
-	movel	8(%a0,%d0),FP_SCR1+8(%a6)	|load third word
-	clrl	%d0			|clear g,r,s
-	lea	FP_SCR1(%a6),%a0
-	btstb	#sign_bit,LOCAL_EX(%a0)
-	sne	LOCAL_SGN(%a0)		|convert to internal ext. format
-
-	bsr	round			|go round the mantissa
-
-	bfclr	LOCAL_SGN(%a0){#0:#8}	|convert back to IEEE ext format
-	beqs	fin_fcr
-	bsetb	#sign_bit,LOCAL_EX(%a0)
-fin_fcr:
-	fmovemx (%a0),%fp0-%fp0
-	rts
-
-	|end
diff --git a/ANDROID_3.4.5/arch/m68k/fpsp040/srem_mod.S b/ANDROID_3.4.5/arch/m68k/fpsp040/srem_mod.S
deleted file mode 100644
index a27e70c9..00000000
--- a/ANDROID_3.4.5/arch/m68k/fpsp040/srem_mod.S
+++ /dev/null
@@ -1,421 +0,0 @@
-|
-|	srem_mod.sa 3.1 12/10/90
-|
-|      The entry point sMOD computes the floating point MOD of the
-|      input values X and Y. The entry point sREM computes the floating
-|      point (IEEE) REM of the input values X and Y.
-|
-|      INPUT
-|      -----
-|      Double-extended value Y is pointed to by address in register
-|      A0. Double-extended value X is located in -12(A0). The values
-|      of X and Y are both nonzero and finite; although either or both
-|      of them can be denormalized. The special cases of zeros, NaNs,
-|      and infinities are handled elsewhere.
-|
-|      OUTPUT
-|      ------
-|      FREM(X,Y) or FMOD(X,Y), depending on entry point.
-|
-|       ALGORITHM
-|       ---------
-|
-|       Step 1.  Save and strip signs of X and Y: signX := sign(X),
-|                signY := sign(Y), X := |X|, Y := |Y|,
-|                signQ := signX EOR signY. Record whether MOD or REM
-|                is requested.
-|
-|       Step 2.  Set L := expo(X)-expo(Y), k := 0, Q := 0.
-|                If (L < 0) then
-|                   R := X, go to Step 4.
-|                else
-|                   R := 2^(-L)X, j := L.
-|                endif
-|
-|       Step 3.  Perform MOD(X,Y)
-|            3.1 If R = Y, go to Step 9.
-|            3.2 If R > Y, then { R := R - Y, Q := Q + 1}
-|            3.3 If j = 0, go to Step 4.
-|            3.4 k := k + 1, j := j - 1, Q := 2Q, R := 2R. Go to
-|                Step 3.1.
-|
-|       Step 4.  At this point, R = X - QY = MOD(X,Y). Set
-|                Last_Subtract := false (used in Step 7 below). If
-|                MOD is requested, go to Step 6.
-|
-|       Step 5.  R = MOD(X,Y), but REM(X,Y) is requested.
-|            5.1 If R < Y/2, then R = MOD(X,Y) = REM(X,Y). Go to
-|                Step 6.
-|            5.2 If R > Y/2, then { set Last_Subtract := true,
-|                Q := Q + 1, Y := signY*Y }. Go to Step 6.
-|            5.3 This is the tricky case of R = Y/2. If Q is odd,
-|                then { Q := Q + 1, signX := -signX }.
-|
-|       Step 6.  R := signX*R.
-|
-|       Step 7.  If Last_Subtract = true, R := R - Y.
-|
-|       Step 8.  Return signQ, last 7 bits of Q, and R as required.
-|
-|       Step 9.  At this point, R = 2^(-j)*X - Q Y = Y. Thus,
-|                X = 2^(j)*(Q+1)Y. set Q := 2^(j)*(Q+1),
-|                R := 0. Return signQ, last 7 bits of Q, and R.
-|
-|
-
-|		Copyright (C) Motorola, Inc. 1990
-|			All Rights Reserved
-|
-|       For details on the license for this file, please see the
-|       file, README, in this same directory.
-
-SREM_MOD:    |idnt    2,1 | Motorola 040 Floating Point Software Package
-
-	|section    8
-
-#include "fpsp.h"
-
-	.set	Mod_Flag,L_SCR3
-	.set	SignY,FP_SCR3+4
-	.set	SignX,FP_SCR3+8
-	.set	SignQ,FP_SCR3+12
-	.set	Sc_Flag,FP_SCR4
-
-	.set	Y,FP_SCR1
-	.set	Y_Hi,Y+4
-	.set	Y_Lo,Y+8
-
-	.set	R,FP_SCR2
-	.set	R_Hi,R+4
-	.set	R_Lo,R+8
-
-
-Scale:     .long	0x00010000,0x80000000,0x00000000,0x00000000
-
-	|xref	t_avoid_unsupp
-
-        .global        smod
-smod:
-
-   movel               #0,Mod_Flag(%a6)
-   bras                Mod_Rem
-
-        .global        srem
-srem:
-
-   movel               #1,Mod_Flag(%a6)
-
-Mod_Rem:
-|..Save sign of X and Y
-   moveml              %d2-%d7,-(%a7)     | ...save data registers
-   movew               (%a0),%d3
-   movew               %d3,SignY(%a6)
-   andil               #0x00007FFF,%d3   | ...Y := |Y|
-
-|
-   movel               4(%a0),%d4
-   movel               8(%a0),%d5        | ...(D3,D4,D5) is |Y|
-
-   tstl                %d3
-   bnes                Y_Normal
-
-   movel               #0x00003FFE,%d3	| ...$3FFD + 1
-   tstl                %d4
-   bnes                HiY_not0
-
-HiY_0:
-   movel               %d5,%d4
-   clrl                %d5
-   subil               #32,%d3
-   clrl                %d6
-   bfffo                %d4{#0:#32},%d6
-   lsll                %d6,%d4
-   subl                %d6,%d3           | ...(D3,D4,D5) is normalized
-|                                       ...with bias $7FFD
-   bras                Chk_X
-
-HiY_not0:
-   clrl                %d6
-   bfffo                %d4{#0:#32},%d6
-   subl                %d6,%d3
-   lsll                %d6,%d4
-   movel               %d5,%d7           | ...a copy of D5
-   lsll                %d6,%d5
-   negl                %d6
-   addil               #32,%d6
-   lsrl                %d6,%d7
-   orl                 %d7,%d4           | ...(D3,D4,D5) normalized
-|                                       ...with bias $7FFD
-   bras                Chk_X
-
-Y_Normal:
-   addil               #0x00003FFE,%d3   | ...(D3,D4,D5) normalized
-|                                       ...with bias $7FFD
-
-Chk_X:
-   movew               -12(%a0),%d0
-   movew               %d0,SignX(%a6)
-   movew               SignY(%a6),%d1
-   eorl                %d0,%d1
-   andil               #0x00008000,%d1
-   movew               %d1,SignQ(%a6)	| ...sign(Q) obtained
-   andil               #0x00007FFF,%d0
-   movel               -8(%a0),%d1
-   movel               -4(%a0),%d2       | ...(D0,D1,D2) is |X|
-   tstl                %d0
-   bnes                X_Normal
-   movel               #0x00003FFE,%d0
-   tstl                %d1
-   bnes                HiX_not0
-
-HiX_0:
-   movel               %d2,%d1
-   clrl                %d2
-   subil               #32,%d0
-   clrl                %d6
-   bfffo                %d1{#0:#32},%d6
-   lsll                %d6,%d1
-   subl                %d6,%d0           | ...(D0,D1,D2) is normalized
-|                                       ...with bias $7FFD
-   bras                Init
-
-HiX_not0:
-   clrl                %d6
-   bfffo                %d1{#0:#32},%d6
-   subl                %d6,%d0
-   lsll                %d6,%d1
-   movel               %d2,%d7           | ...a copy of D2
-   lsll                %d6,%d2
-   negl                %d6
-   addil               #32,%d6
-   lsrl                %d6,%d7
-   orl                 %d7,%d1           | ...(D0,D1,D2) normalized
-|                                       ...with bias $7FFD
-   bras                Init
-
-X_Normal:
-   addil               #0x00003FFE,%d0   | ...(D0,D1,D2) normalized
-|                                       ...with bias $7FFD
-
-Init:
-|
-   movel               %d3,L_SCR1(%a6)   | ...save biased expo(Y)
-   movel		%d0,L_SCR2(%a6)	|save d0
-   subl                %d3,%d0           | ...L := expo(X)-expo(Y)
-|   Move.L               D0,L            ...D0 is j
-   clrl                %d6              | ...D6 := carry <- 0
-   clrl                %d3              | ...D3 is Q
-   moveal              #0,%a1           | ...A1 is k; j+k=L, Q=0
-
-|..(Carry,D1,D2) is R
-   tstl                %d0
-   bges                Mod_Loop
-
-|..expo(X) < expo(Y). Thus X = mod(X,Y)
-|
-   movel		L_SCR2(%a6),%d0	|restore d0
-   bra                Get_Mod
-
-|..At this point  R = 2^(-L)X; Q = 0; k = 0; and  k+j = L
-
-
-Mod_Loop:
-   tstl                %d6              | ...test carry bit
-   bgts                R_GT_Y
-
-|..At this point carry = 0, R = (D1,D2), Y = (D4,D5)
-   cmpl                %d4,%d1           | ...compare hi(R) and hi(Y)
-   bnes                R_NE_Y
-   cmpl                %d5,%d2           | ...compare lo(R) and lo(Y)
-   bnes                R_NE_Y
-
-|..At this point, R = Y
-   bra                Rem_is_0
-
-R_NE_Y:
-|..use the borrow of the previous compare
-   bcss                R_LT_Y          | ...borrow is set iff R < Y
-
-R_GT_Y:
-|..If Carry is set, then Y < (Carry,D1,D2) < 2Y. Otherwise, Carry = 0
-|..and Y < (D1,D2) < 2Y. Either way, perform R - Y
-   subl                %d5,%d2           | ...lo(R) - lo(Y)
-   subxl               %d4,%d1           | ...hi(R) - hi(Y)
-   clrl                %d6              | ...clear carry
-   addql               #1,%d3           | ...Q := Q + 1
-
-R_LT_Y:
-|..At this point, Carry=0, R < Y. R = 2^(k-L)X - QY; k+j = L; j >= 0.
-   tstl                %d0              | ...see if j = 0.
-   beqs                PostLoop
-
-   addl                %d3,%d3           | ...Q := 2Q
-   addl                %d2,%d2           | ...lo(R) = 2lo(R)
-   roxll               #1,%d1           | ...hi(R) = 2hi(R) + carry
-   scs                  %d6              | ...set Carry if 2(R) overflows
-   addql               #1,%a1           | ...k := k+1
-   subql               #1,%d0           | ...j := j - 1
-|..At this point, R=(Carry,D1,D2) = 2^(k-L)X - QY, j+k=L, j >= 0, R < 2Y.
-
-   bras                Mod_Loop
-
-PostLoop:
-|..k = L, j = 0, Carry = 0, R = (D1,D2) = X - QY, R < Y.
-
-|..normalize R.
-   movel               L_SCR1(%a6),%d0           | ...new biased expo of R
-   tstl                %d1
-   bnes                HiR_not0
-
-HiR_0:
-   movel               %d2,%d1
-   clrl                %d2
-   subil               #32,%d0
-   clrl                %d6
-   bfffo                %d1{#0:#32},%d6
-   lsll                %d6,%d1
-   subl                %d6,%d0           | ...(D0,D1,D2) is normalized
-|                                       ...with bias $7FFD
-   bras                Get_Mod
-
-HiR_not0:
-   clrl                %d6
-   bfffo                %d1{#0:#32},%d6
-   bmis                Get_Mod         | ...already normalized
-   subl                %d6,%d0
-   lsll                %d6,%d1
-   movel               %d2,%d7           | ...a copy of D2
-   lsll                %d6,%d2
-   negl                %d6
-   addil               #32,%d6
-   lsrl                %d6,%d7
-   orl                 %d7,%d1           | ...(D0,D1,D2) normalized
-
-|
-Get_Mod:
-   cmpil		#0x000041FE,%d0
-   bges		No_Scale
-Do_Scale:
-   movew		%d0,R(%a6)
-   clrw		R+2(%a6)
-   movel		%d1,R_Hi(%a6)
-   movel		%d2,R_Lo(%a6)
-   movel		L_SCR1(%a6),%d6
-   movew		%d6,Y(%a6)
-   clrw		Y+2(%a6)
-   movel		%d4,Y_Hi(%a6)
-   movel		%d5,Y_Lo(%a6)
-   fmovex		R(%a6),%fp0		| ...no exception
-   movel		#1,Sc_Flag(%a6)
-   bras		ModOrRem
-No_Scale:
-   movel		%d1,R_Hi(%a6)
-   movel		%d2,R_Lo(%a6)
-   subil		#0x3FFE,%d0
-   movew		%d0,R(%a6)
-   clrw		R+2(%a6)
-   movel		L_SCR1(%a6),%d6
-   subil		#0x3FFE,%d6
-   movel		%d6,L_SCR1(%a6)
-   fmovex		R(%a6),%fp0
-   movew		%d6,Y(%a6)
-   movel		%d4,Y_Hi(%a6)
-   movel		%d5,Y_Lo(%a6)
-   movel		#0,Sc_Flag(%a6)
-
-|
-
-
-ModOrRem:
-   movel               Mod_Flag(%a6),%d6
-   beqs                Fix_Sign
-
-   movel               L_SCR1(%a6),%d6           | ...new biased expo(Y)
-   subql               #1,%d6           | ...biased expo(Y/2)
-   cmpl                %d6,%d0
-   blts                Fix_Sign
-   bgts                Last_Sub
-
-   cmpl                %d4,%d1
-   bnes                Not_EQ
-   cmpl                %d5,%d2
-   bnes                Not_EQ
-   bra                Tie_Case
-
-Not_EQ:
-   bcss                Fix_Sign
-
-Last_Sub:
-|
-   fsubx		Y(%a6),%fp0		| ...no exceptions
-   addql               #1,%d3           | ...Q := Q + 1
-
-|
-
-Fix_Sign:
-|..Get sign of X
-   movew               SignX(%a6),%d6
-   bges		Get_Q
-   fnegx		%fp0
-
-|..Get Q
-|
-Get_Q:
-   clrl		%d6
-   movew               SignQ(%a6),%d6        | ...D6 is sign(Q)
-   movel               #8,%d7
-   lsrl                %d7,%d6
-   andil               #0x0000007F,%d3   | ...7 bits of Q
-   orl                 %d6,%d3           | ...sign and bits of Q
-   swap                 %d3
-   fmovel              %fpsr,%d6
-   andil               #0xFF00FFFF,%d6
-   orl                 %d3,%d6
-   fmovel              %d6,%fpsr         | ...put Q in fpsr
-
-|
-Restore:
-   moveml              (%a7)+,%d2-%d7
-   fmovel              USER_FPCR(%a6),%fpcr
-   movel               Sc_Flag(%a6),%d0
-   beqs                Finish
-   fmulx		Scale(%pc),%fp0	| ...may cause underflow
-   bra			t_avoid_unsupp	|check for denorm as a
-|					;result of the scaling
-
-Finish:
-	fmovex		%fp0,%fp0		|capture exceptions & round
-	rts
-
-Rem_is_0:
-|..R = 2^(-j)X - Q Y = Y, thus R = 0 and quotient = 2^j (Q+1)
-   addql               #1,%d3
-   cmpil               #8,%d0           | ...D0 is j
-   bges                Q_Big
-
-   lsll                %d0,%d3
-   bras                Set_R_0
-
-Q_Big:
-   clrl                %d3
-
-Set_R_0:
-   fmoves		#0x00000000,%fp0
-   movel		#0,Sc_Flag(%a6)
-   bra                Fix_Sign
-
-Tie_Case:
-|..Check parity of Q
-   movel               %d3,%d6
-   andil               #0x00000001,%d6
-   tstl                %d6
-   beq                Fix_Sign	| ...Q is even
-
-|..Q is odd, Q := Q + 1, signX := -signX
-   addql               #1,%d3
-   movew               SignX(%a6),%d6
-   eoril               #0x00008000,%d6
-   movew               %d6,SignX(%a6)
-   bra                Fix_Sign
-
-   |end
diff --git a/ANDROID_3.4.5/arch/m68k/fpsp040/ssin.S b/ANDROID_3.4.5/arch/m68k/fpsp040/ssin.S
deleted file mode 100644
index a1ef8e01..00000000
--- a/ANDROID_3.4.5/arch/m68k/fpsp040/ssin.S
+++ /dev/null
@@ -1,745 +0,0 @@
-|
-|	ssin.sa 3.3 7/29/91
-|
-|	The entry point sSIN computes the sine of an input argument
-|	sCOS computes the cosine, and sSINCOS computes both. The
-|	corresponding entry points with a "d" computes the same
-|	corresponding function values for denormalized inputs.
-|
-|	Input: Double-extended number X in location pointed to
-|		by address register a0.
-|
-|	Output: The function value sin(X) or cos(X) returned in Fp0 if SIN or
-|		COS is requested. Otherwise, for SINCOS, sin(X) is returned
-|		in Fp0, and cos(X) is returned in Fp1.
-|
-|	Modifies: Fp0 for SIN or COS; both Fp0 and Fp1 for SINCOS.
-|
-|	Accuracy and Monotonicity: The returned result is within 1 ulp in
-|		64 significant bit, i.e. within 0.5001 ulp to 53 bits if the
-|		result is subsequently rounded to double precision. The
-|		result is provably monotonic in double precision.
-|
-|	Speed: The programs sSIN and sCOS take approximately 150 cycles for
-|		input argument X such that |X| < 15Pi, which is the usual
-|		situation. The speed for sSINCOS is approximately 190 cycles.
-|
-|	Algorithm:
-|
-|	SIN and COS:
-|	1. If SIN is invoked, set AdjN := 0; otherwise, set AdjN := 1.
-|
-|	2. If |X| >= 15Pi or |X| < 2**(-40), go to 7.
-|
-|	3. Decompose X as X = N(Pi/2) + r where |r| <= Pi/4. Let
-|		k = N mod 4, so in particular, k = 0,1,2,or 3. Overwrite
-|		k by k := k + AdjN.
-|
-|	4. If k is even, go to 6.
-|
-|	5. (k is odd) Set j := (k-1)/2, sgn := (-1)**j. Return sgn*cos(r)
-|		where cos(r) is approximated by an even polynomial in r,
-|		1 + r*r*(B1+s*(B2+ ... + s*B8)),	s = r*r.
-|		Exit.
-|
-|	6. (k is even) Set j := k/2, sgn := (-1)**j. Return sgn*sin(r)
-|		where sin(r) is approximated by an odd polynomial in r
-|		r + r*s*(A1+s*(A2+ ... + s*A7)),	s = r*r.
-|		Exit.
-|
-|	7. If |X| > 1, go to 9.
-|
-|	8. (|X|<2**(-40)) If SIN is invoked, return X; otherwise return 1.
-|
-|	9. Overwrite X by X := X rem 2Pi. Now that |X| <= Pi, go back to 3.
-|
-|	SINCOS:
-|	1. If |X| >= 15Pi or |X| < 2**(-40), go to 6.
-|
-|	2. Decompose X as X = N(Pi/2) + r where |r| <= Pi/4. Let
-|		k = N mod 4, so in particular, k = 0,1,2,or 3.
-|
-|	3. If k is even, go to 5.
-|
-|	4. (k is odd) Set j1 := (k-1)/2, j2 := j1 (EOR) (k mod 2), i.e.
-|		j1 exclusive or with the l.s.b. of k.
-|		sgn1 := (-1)**j1, sgn2 := (-1)**j2.
-|		SIN(X) = sgn1 * cos(r) and COS(X) = sgn2*sin(r) where
-|		sin(r) and cos(r) are computed as odd and even polynomials
-|		in r, respectively. Exit
-|
-|	5. (k is even) Set j1 := k/2, sgn1 := (-1)**j1.
-|		SIN(X) = sgn1 * sin(r) and COS(X) = sgn1*cos(r) where
-|		sin(r) and cos(r) are computed as odd and even polynomials
-|		in r, respectively. Exit
-|
-|	6. If |X| > 1, go to 8.
-|
-|	7. (|X|<2**(-40)) SIN(X) = X and COS(X) = 1. Exit.
-|
-|	8. Overwrite X by X := X rem 2Pi. Now that |X| <= Pi, go back to 2.
-|
-
-|		Copyright (C) Motorola, Inc. 1990
-|			All Rights Reserved
-|
-|       For details on the license for this file, please see the
-|       file, README, in this same directory.
-
-|SSIN	idnt	2,1 | Motorola 040 Floating Point Software Package
-
-	|section	8
-
-#include "fpsp.h"
-
-BOUNDS1:	.long 0x3FD78000,0x4004BC7E
-TWOBYPI:	.long 0x3FE45F30,0x6DC9C883
-
-SINA7:	.long 0xBD6AAA77,0xCCC994F5
-SINA6:	.long 0x3DE61209,0x7AAE8DA1
-
-SINA5:	.long 0xBE5AE645,0x2A118AE4
-SINA4:	.long 0x3EC71DE3,0xA5341531
-
-SINA3:	.long 0xBF2A01A0,0x1A018B59,0x00000000,0x00000000
-
-SINA2:	.long 0x3FF80000,0x88888888,0x888859AF,0x00000000
-
-SINA1:	.long 0xBFFC0000,0xAAAAAAAA,0xAAAAAA99,0x00000000
-
-COSB8:	.long 0x3D2AC4D0,0xD6011EE3
-COSB7:	.long 0xBDA9396F,0x9F45AC19
-
-COSB6:	.long 0x3E21EED9,0x0612C972
-COSB5:	.long 0xBE927E4F,0xB79D9FCF
-
-COSB4:	.long 0x3EFA01A0,0x1A01D423,0x00000000,0x00000000
-
-COSB3:	.long 0xBFF50000,0xB60B60B6,0x0B61D438,0x00000000
-
-COSB2:	.long 0x3FFA0000,0xAAAAAAAA,0xAAAAAB5E
-COSB1:	.long 0xBF000000
-
-INVTWOPI: .long 0x3FFC0000,0xA2F9836E,0x4E44152A
-
-TWOPI1:	.long 0x40010000,0xC90FDAA2,0x00000000,0x00000000
-TWOPI2:	.long 0x3FDF0000,0x85A308D4,0x00000000,0x00000000
-
-	|xref	PITBL
-
-	.set	INARG,FP_SCR4
-
-	.set	X,FP_SCR5
-	.set	XDCARE,X+2
-	.set	XFRAC,X+4
-
-	.set	RPRIME,FP_SCR1
-	.set	SPRIME,FP_SCR2
-
-	.set	POSNEG1,L_SCR1
-	.set	TWOTO63,L_SCR1
-
-	.set	ENDFLAG,L_SCR2
-	.set	N,L_SCR2
-
-	.set	ADJN,L_SCR3
-
-	| xref	t_frcinx
-	|xref	t_extdnrm
-	|xref	sto_cos
-
-	.global	ssind
-ssind:
-|--SIN(X) = X FOR DENORMALIZED X
-	bra		t_extdnrm
-
-	.global	scosd
-scosd:
-|--COS(X) = 1 FOR DENORMALIZED X
-
-	fmoves		#0x3F800000,%fp0
-|
-|	9D25B Fix: Sometimes the previous fmove.s sets fpsr bits
-|
-	fmovel		#0,%fpsr
-|
-	bra		t_frcinx
-
-	.global	ssin
-ssin:
-|--SET ADJN TO 0
-	movel		#0,ADJN(%a6)
-	bras		SINBGN
-
-	.global	scos
-scos:
-|--SET ADJN TO 1
-	movel		#1,ADJN(%a6)
-
-SINBGN:
-|--SAVE FPCR, FP1. CHECK IF |X| IS TOO SMALL OR LARGE
-
-	fmovex		(%a0),%fp0	| ...LOAD INPUT
-
-	movel		(%a0),%d0
-	movew		4(%a0),%d0
-	fmovex		%fp0,X(%a6)
-	andil		#0x7FFFFFFF,%d0		| ...COMPACTIFY X
-
-	cmpil		#0x3FD78000,%d0		| ...|X| >= 2**(-40)?
-	bges		SOK1
-	bra		SINSM
-
-SOK1:
-	cmpil		#0x4004BC7E,%d0		| ...|X| < 15 PI?
-	blts		SINMAIN
-	bra		REDUCEX
-
-SINMAIN:
-|--THIS IS THE USUAL CASE, |X| <= 15 PI.
-|--THE ARGUMENT REDUCTION IS DONE BY TABLE LOOK UP.
-	fmovex		%fp0,%fp1
-	fmuld		TWOBYPI,%fp1	| ...X*2/PI
-
-|--HIDE THE NEXT THREE INSTRUCTIONS
-	lea		PITBL+0x200,%a1 | ...TABLE OF N*PI/2, N = -32,...,32
-
-
-|--FP1 IS NOW READY
-	fmovel		%fp1,N(%a6)		| ...CONVERT TO INTEGER
-
-	movel		N(%a6),%d0
-	asll		#4,%d0
-	addal		%d0,%a1	| ...A1 IS THE ADDRESS OF N*PIBY2
-|				...WHICH IS IN TWO PIECES Y1 & Y2
-
-	fsubx		(%a1)+,%fp0	| ...X-Y1
-|--HIDE THE NEXT ONE
-	fsubs		(%a1),%fp0	| ...FP0 IS R = (X-Y1)-Y2
-
-SINCONT:
-|--continuation from REDUCEX
-
-|--GET N+ADJN AND SEE IF SIN(R) OR COS(R) IS NEEDED
-	movel		N(%a6),%d0
-	addl		ADJN(%a6),%d0	| ...SEE IF D0 IS ODD OR EVEN
-	rorl		#1,%d0	| ...D0 WAS ODD IFF D0 IS NEGATIVE
-	cmpil		#0,%d0
-	blt		COSPOLY
-
-SINPOLY:
-|--LET J BE THE LEAST SIG. BIT OF D0, LET SGN := (-1)**J.
-|--THEN WE RETURN	SGN*SIN(R). SGN*SIN(R) IS COMPUTED BY
-|--R' + R'*S*(A1 + S(A2 + S(A3 + S(A4 + ... + SA7)))), WHERE
-|--R' = SGN*R, S=R*R. THIS CAN BE REWRITTEN AS
-|--R' + R'*S*( [A1+T(A3+T(A5+TA7))] + [S(A2+T(A4+TA6))])
-|--WHERE T=S*S.
-|--NOTE THAT A3 THROUGH A7 ARE STORED IN DOUBLE PRECISION
-|--WHILE A1 AND A2 ARE IN DOUBLE-EXTENDED FORMAT.
-	fmovex		%fp0,X(%a6)	| ...X IS R
-	fmulx		%fp0,%fp0	| ...FP0 IS S
-|---HIDE THE NEXT TWO WHILE WAITING FOR FP0
-	fmoved		SINA7,%fp3
-	fmoved		SINA6,%fp2
-|--FP0 IS NOW READY
-	fmovex		%fp0,%fp1
-	fmulx		%fp1,%fp1	| ...FP1 IS T
-|--HIDE THE NEXT TWO WHILE WAITING FOR FP1
-
-	rorl		#1,%d0
-	andil		#0x80000000,%d0
-|				...LEAST SIG. BIT OF D0 IN SIGN POSITION
-	eorl		%d0,X(%a6)	| ...X IS NOW R'= SGN*R
-
-	fmulx		%fp1,%fp3	| ...TA7
-	fmulx		%fp1,%fp2	| ...TA6
-
-	faddd		SINA5,%fp3 | ...A5+TA7
-	faddd		SINA4,%fp2 | ...A4+TA6
-
-	fmulx		%fp1,%fp3	| ...T(A5+TA7)
-	fmulx		%fp1,%fp2	| ...T(A4+TA6)
-
-	faddd		SINA3,%fp3 | ...A3+T(A5+TA7)
-	faddx		SINA2,%fp2 | ...A2+T(A4+TA6)
-
-	fmulx		%fp3,%fp1	| ...T(A3+T(A5+TA7))
-
-	fmulx		%fp0,%fp2	| ...S(A2+T(A4+TA6))
-	faddx		SINA1,%fp1 | ...A1+T(A3+T(A5+TA7))
-	fmulx		X(%a6),%fp0	| ...R'*S
-
-	faddx		%fp2,%fp1	| ...[A1+T(A3+T(A5+TA7))]+[S(A2+T(A4+TA6))]
-|--FP3 RELEASED, RESTORE NOW AND TAKE SOME ADVANTAGE OF HIDING
-|--FP2 RELEASED, RESTORE NOW AND TAKE FULL ADVANTAGE OF HIDING
-
-
-	fmulx		%fp1,%fp0		| ...SIN(R')-R'
-|--FP1 RELEASED.
-
-	fmovel		%d1,%FPCR		|restore users exceptions
-	faddx		X(%a6),%fp0		|last inst - possible exception set
-	bra		t_frcinx
-
-
-COSPOLY:
-|--LET J BE THE LEAST SIG. BIT OF D0, LET SGN := (-1)**J.
-|--THEN WE RETURN	SGN*COS(R). SGN*COS(R) IS COMPUTED BY
-|--SGN + S'*(B1 + S(B2 + S(B3 + S(B4 + ... + SB8)))), WHERE
-|--S=R*R AND S'=SGN*S. THIS CAN BE REWRITTEN AS
-|--SGN + S'*([B1+T(B3+T(B5+TB7))] + [S(B2+T(B4+T(B6+TB8)))])
-|--WHERE T=S*S.
-|--NOTE THAT B4 THROUGH B8 ARE STORED IN DOUBLE PRECISION
-|--WHILE B2 AND B3 ARE IN DOUBLE-EXTENDED FORMAT, B1 IS -1/2
-|--AND IS THEREFORE STORED AS SINGLE PRECISION.
-
-	fmulx		%fp0,%fp0	| ...FP0 IS S
-|---HIDE THE NEXT TWO WHILE WAITING FOR FP0
-	fmoved		COSB8,%fp2
-	fmoved		COSB7,%fp3
-|--FP0 IS NOW READY
-	fmovex		%fp0,%fp1
-	fmulx		%fp1,%fp1	| ...FP1 IS T
-|--HIDE THE NEXT TWO WHILE WAITING FOR FP1
-	fmovex		%fp0,X(%a6)	| ...X IS S
-	rorl		#1,%d0
-	andil		#0x80000000,%d0
-|			...LEAST SIG. BIT OF D0 IN SIGN POSITION
-
-	fmulx		%fp1,%fp2	| ...TB8
-|--HIDE THE NEXT TWO WHILE WAITING FOR THE XU
-	eorl		%d0,X(%a6)	| ...X IS NOW S'= SGN*S
-	andil		#0x80000000,%d0
-
-	fmulx		%fp1,%fp3	| ...TB7
-|--HIDE THE NEXT TWO WHILE WAITING FOR THE XU
-	oril		#0x3F800000,%d0	| ...D0 IS SGN IN SINGLE
-	movel		%d0,POSNEG1(%a6)
-
-	faddd		COSB6,%fp2 | ...B6+TB8
-	faddd		COSB5,%fp3 | ...B5+TB7
-
-	fmulx		%fp1,%fp2	| ...T(B6+TB8)
-	fmulx		%fp1,%fp3	| ...T(B5+TB7)
-
-	faddd		COSB4,%fp2 | ...B4+T(B6+TB8)
-	faddx		COSB3,%fp3 | ...B3+T(B5+TB7)
-
-	fmulx		%fp1,%fp2	| ...T(B4+T(B6+TB8))
-	fmulx		%fp3,%fp1	| ...T(B3+T(B5+TB7))
-
-	faddx		COSB2,%fp2 | ...B2+T(B4+T(B6+TB8))
-	fadds		COSB1,%fp1 | ...B1+T(B3+T(B5+TB7))
-
-	fmulx		%fp2,%fp0	| ...S(B2+T(B4+T(B6+TB8)))
-|--FP3 RELEASED, RESTORE NOW AND TAKE SOME ADVANTAGE OF HIDING
-|--FP2 RELEASED.
-
-
-	faddx		%fp1,%fp0
-|--FP1 RELEASED
-
-	fmulx		X(%a6),%fp0
-
-	fmovel		%d1,%FPCR		|restore users exceptions
-	fadds		POSNEG1(%a6),%fp0	|last inst - possible exception set
-	bra		t_frcinx
-
-
-SINBORS:
-|--IF |X| > 15PI, WE USE THE GENERAL ARGUMENT REDUCTION.
-|--IF |X| < 2**(-40), RETURN X OR 1.
-	cmpil		#0x3FFF8000,%d0
-	bgts		REDUCEX
-
-
-SINSM:
-	movel		ADJN(%a6),%d0
-	cmpil		#0,%d0
-	bgts		COSTINY
-
-SINTINY:
-	movew		#0x0000,XDCARE(%a6)	| ...JUST IN CASE
-	fmovel		%d1,%FPCR		|restore users exceptions
-	fmovex		X(%a6),%fp0		|last inst - possible exception set
-	bra		t_frcinx
-
-
-COSTINY:
-	fmoves		#0x3F800000,%fp0
-
-	fmovel		%d1,%FPCR		|restore users exceptions
-	fsubs		#0x00800000,%fp0	|last inst - possible exception set
-	bra		t_frcinx
-
-
-REDUCEX:
-|--WHEN REDUCEX IS USED, THE CODE WILL INEVITABLY BE SLOW.
-|--THIS REDUCTION METHOD, HOWEVER, IS MUCH FASTER THAN USING
-|--THE REMAINDER INSTRUCTION WHICH IS NOW IN SOFTWARE.
-
-	fmovemx	%fp2-%fp5,-(%a7)	| ...save FP2 through FP5
-	movel		%d2,-(%a7)
-        fmoves         #0x00000000,%fp1
-|--If compact form of abs(arg) in d0=$7ffeffff, argument is so large that
-|--there is a danger of unwanted overflow in first LOOP iteration.  In this
-|--case, reduce argument by one remainder step to make subsequent reduction
-|--safe.
-	cmpil	#0x7ffeffff,%d0		|is argument dangerously large?
-	bnes	LOOP
-	movel	#0x7ffe0000,FP_SCR2(%a6)	|yes
-|					;create 2**16383*PI/2
-	movel	#0xc90fdaa2,FP_SCR2+4(%a6)
-	clrl	FP_SCR2+8(%a6)
-	ftstx	%fp0			|test sign of argument
-	movel	#0x7fdc0000,FP_SCR3(%a6)	|create low half of 2**16383*
-|					;PI/2 at FP_SCR3
-	movel	#0x85a308d3,FP_SCR3+4(%a6)
-	clrl   FP_SCR3+8(%a6)
-	fblt	red_neg
-	orw	#0x8000,FP_SCR2(%a6)	|positive arg
-	orw	#0x8000,FP_SCR3(%a6)
-red_neg:
-	faddx  FP_SCR2(%a6),%fp0		|high part of reduction is exact
-	fmovex  %fp0,%fp1		|save high result in fp1
-	faddx  FP_SCR3(%a6),%fp0		|low part of reduction
-	fsubx  %fp0,%fp1			|determine low component of result
-	faddx  FP_SCR3(%a6),%fp1		|fp0/fp1 are reduced argument.
-
-|--ON ENTRY, FP0 IS X, ON RETURN, FP0 IS X REM PI/2, |X| <= PI/4.
-|--integer quotient will be stored in N
-|--Intermediate remainder is 66-bit long; (R,r) in (FP0,FP1)
-
-LOOP:
-	fmovex		%fp0,INARG(%a6)	| ...+-2**K * F, 1 <= F < 2
-	movew		INARG(%a6),%d0
-        movel          %d0,%a1		| ...save a copy of D0
-	andil		#0x00007FFF,%d0
-	subil		#0x00003FFF,%d0	| ...D0 IS K
-	cmpil		#28,%d0
-	bles		LASTLOOP
-CONTLOOP:
-	subil		#27,%d0	 | ...D0 IS L := K-27
-	movel		#0,ENDFLAG(%a6)
-	bras		WORK
-LASTLOOP:
-	clrl		%d0		| ...D0 IS L := 0
-	movel		#1,ENDFLAG(%a6)
-
-WORK:
-|--FIND THE REMAINDER OF (R,r) W.R.T.	2**L * (PI/2). L IS SO CHOSEN
-|--THAT	INT( X * (2/PI) / 2**(L) ) < 2**29.
-
-|--CREATE 2**(-L) * (2/PI), SIGN(INARG)*2**(63),
-|--2**L * (PIby2_1), 2**L * (PIby2_2)
-
-	movel		#0x00003FFE,%d2	| ...BIASED EXPO OF 2/PI
-	subl		%d0,%d2		| ...BIASED EXPO OF 2**(-L)*(2/PI)
-
-	movel		#0xA2F9836E,FP_SCR1+4(%a6)
-	movel		#0x4E44152A,FP_SCR1+8(%a6)
-	movew		%d2,FP_SCR1(%a6)	| ...FP_SCR1 is 2**(-L)*(2/PI)
-
-	fmovex		%fp0,%fp2
-	fmulx		FP_SCR1(%a6),%fp2
-|--WE MUST NOW FIND INT(FP2). SINCE WE NEED THIS VALUE IN
-|--FLOATING POINT FORMAT, THE TWO FMOVE'S	FMOVE.L FP <--> N
-|--WILL BE TOO INEFFICIENT. THE WAY AROUND IT IS THAT
-|--(SIGN(INARG)*2**63	+	FP2) - SIGN(INARG)*2**63 WILL GIVE
-|--US THE DESIRED VALUE IN FLOATING POINT.
-
-|--HIDE SIX CYCLES OF INSTRUCTION
-        movel		%a1,%d2
-        swap		%d2
-	andil		#0x80000000,%d2
-	oril		#0x5F000000,%d2	| ...D2 IS SIGN(INARG)*2**63 IN SGL
-	movel		%d2,TWOTO63(%a6)
-
-	movel		%d0,%d2
-	addil		#0x00003FFF,%d2	| ...BIASED EXPO OF 2**L * (PI/2)
-
-|--FP2 IS READY
-	fadds		TWOTO63(%a6),%fp2	| ...THE FRACTIONAL PART OF FP1 IS ROUNDED
-
-|--HIDE 4 CYCLES OF INSTRUCTION; creating 2**(L)*Piby2_1  and  2**(L)*Piby2_2
-        movew		%d2,FP_SCR2(%a6)
-	clrw           FP_SCR2+2(%a6)
-	movel		#0xC90FDAA2,FP_SCR2+4(%a6)
-	clrl		FP_SCR2+8(%a6)		| ...FP_SCR2 is  2**(L) * Piby2_1
-
-|--FP2 IS READY
-	fsubs		TWOTO63(%a6),%fp2		| ...FP2 is N
-
-	addil		#0x00003FDD,%d0
-        movew		%d0,FP_SCR3(%a6)
-	clrw           FP_SCR3+2(%a6)
-	movel		#0x85A308D3,FP_SCR3+4(%a6)
-	clrl		FP_SCR3+8(%a6)		| ...FP_SCR3 is 2**(L) * Piby2_2
-
-	movel		ENDFLAG(%a6),%d0
-
-|--We are now ready to perform (R+r) - N*P1 - N*P2, P1 = 2**(L) * Piby2_1 and
-|--P2 = 2**(L) * Piby2_2
-	fmovex		%fp2,%fp4
-	fmulx		FP_SCR2(%a6),%fp4		| ...W = N*P1
-	fmovex		%fp2,%fp5
-	fmulx		FP_SCR3(%a6),%fp5		| ...w = N*P2
-	fmovex		%fp4,%fp3
-|--we want P+p = W+w  but  |p| <= half ulp of P
-|--Then, we need to compute  A := R-P   and  a := r-p
-	faddx		%fp5,%fp3			| ...FP3 is P
-	fsubx		%fp3,%fp4			| ...W-P
-
-	fsubx		%fp3,%fp0			| ...FP0 is A := R - P
-        faddx		%fp5,%fp4			| ...FP4 is p = (W-P)+w
-
-	fmovex		%fp0,%fp3			| ...FP3 A
-	fsubx		%fp4,%fp1			| ...FP1 is a := r - p
-
-|--Now we need to normalize (A,a) to  "new (R,r)" where R+r = A+a but
-|--|r| <= half ulp of R.
-	faddx		%fp1,%fp0			| ...FP0 is R := A+a
-|--No need to calculate r if this is the last loop
-	cmpil		#0,%d0
-	bgt		RESTORE
-
-|--Need to calculate r
-	fsubx		%fp0,%fp3			| ...A-R
-	faddx		%fp3,%fp1			| ...FP1 is r := (A-R)+a
-	bra		LOOP
-
-RESTORE:
-        fmovel		%fp2,N(%a6)
-	movel		(%a7)+,%d2
-	fmovemx	(%a7)+,%fp2-%fp5
-
-
-	movel		ADJN(%a6),%d0
-	cmpil		#4,%d0
-
-	blt		SINCONT
-	bras		SCCONT
-
-	.global	ssincosd
-ssincosd:
-|--SIN AND COS OF X FOR DENORMALIZED X
-
-	fmoves		#0x3F800000,%fp1
-	bsr		sto_cos		|store cosine result
-	bra		t_extdnrm
-
-	.global	ssincos
-ssincos:
-|--SET ADJN TO 4
-	movel		#4,ADJN(%a6)
-
-	fmovex		(%a0),%fp0	| ...LOAD INPUT
-
-	movel		(%a0),%d0
-	movew		4(%a0),%d0
-	fmovex		%fp0,X(%a6)
-	andil		#0x7FFFFFFF,%d0		| ...COMPACTIFY X
-
-	cmpil		#0x3FD78000,%d0		| ...|X| >= 2**(-40)?
-	bges		SCOK1
-	bra		SCSM
-
-SCOK1:
-	cmpil		#0x4004BC7E,%d0		| ...|X| < 15 PI?
-	blts		SCMAIN
-	bra		REDUCEX
-
-
-SCMAIN:
-|--THIS IS THE USUAL CASE, |X| <= 15 PI.
-|--THE ARGUMENT REDUCTION IS DONE BY TABLE LOOK UP.
-	fmovex		%fp0,%fp1
-	fmuld		TWOBYPI,%fp1	| ...X*2/PI
-
-|--HIDE THE NEXT THREE INSTRUCTIONS
-	lea		PITBL+0x200,%a1 | ...TABLE OF N*PI/2, N = -32,...,32
-
-
-|--FP1 IS NOW READY
-	fmovel		%fp1,N(%a6)		| ...CONVERT TO INTEGER
-
-	movel		N(%a6),%d0
-	asll		#4,%d0
-	addal		%d0,%a1		| ...ADDRESS OF N*PIBY2, IN Y1, Y2
-
-	fsubx		(%a1)+,%fp0	| ...X-Y1
-        fsubs		(%a1),%fp0	| ...FP0 IS R = (X-Y1)-Y2
-
-SCCONT:
-|--continuation point from REDUCEX
-
-|--HIDE THE NEXT TWO
-	movel		N(%a6),%d0
-	rorl		#1,%d0
-
-	cmpil		#0,%d0		| ...D0 < 0 IFF N IS ODD
-	bge		NEVEN
-
-NODD:
-|--REGISTERS SAVED SO FAR: D0, A0, FP2.
-
-	fmovex		%fp0,RPRIME(%a6)
-	fmulx		%fp0,%fp0	 | ...FP0 IS S = R*R
-	fmoved		SINA7,%fp1	| ...A7
-	fmoved		COSB8,%fp2	| ...B8
-	fmulx		%fp0,%fp1	 | ...SA7
-	movel		%d2,-(%a7)
-	movel		%d0,%d2
-	fmulx		%fp0,%fp2	 | ...SB8
-	rorl		#1,%d2
-	andil		#0x80000000,%d2
-
-	faddd		SINA6,%fp1	| ...A6+SA7
-	eorl		%d0,%d2
-	andil		#0x80000000,%d2
-	faddd		COSB7,%fp2	| ...B7+SB8
-
-	fmulx		%fp0,%fp1	 | ...S(A6+SA7)
-	eorl		%d2,RPRIME(%a6)
-	movel		(%a7)+,%d2
-	fmulx		%fp0,%fp2	 | ...S(B7+SB8)
-	rorl		#1,%d0
-	andil		#0x80000000,%d0
-
-	faddd		SINA5,%fp1	| ...A5+S(A6+SA7)
-	movel		#0x3F800000,POSNEG1(%a6)
-	eorl		%d0,POSNEG1(%a6)
-	faddd		COSB6,%fp2	| ...B6+S(B7+SB8)
-
-	fmulx		%fp0,%fp1	 | ...S(A5+S(A6+SA7))
-	fmulx		%fp0,%fp2	 | ...S(B6+S(B7+SB8))
-	fmovex		%fp0,SPRIME(%a6)
-
-	faddd		SINA4,%fp1	| ...A4+S(A5+S(A6+SA7))
-	eorl		%d0,SPRIME(%a6)
-	faddd		COSB5,%fp2	| ...B5+S(B6+S(B7+SB8))
-
-	fmulx		%fp0,%fp1	 | ...S(A4+...)
-	fmulx		%fp0,%fp2	 | ...S(B5+...)
-
-	faddd		SINA3,%fp1	| ...A3+S(A4+...)
-	faddd		COSB4,%fp2	| ...B4+S(B5+...)
-
-	fmulx		%fp0,%fp1	 | ...S(A3+...)
-	fmulx		%fp0,%fp2	 | ...S(B4+...)
-
-	faddx		SINA2,%fp1	| ...A2+S(A3+...)
-	faddx		COSB3,%fp2	| ...B3+S(B4+...)
-
-	fmulx		%fp0,%fp1	 | ...S(A2+...)
-	fmulx		%fp0,%fp2	 | ...S(B3+...)
-
-	faddx		SINA1,%fp1	| ...A1+S(A2+...)
-	faddx		COSB2,%fp2	| ...B2+S(B3+...)
-
-	fmulx		%fp0,%fp1	 | ...S(A1+...)
-	fmulx		%fp2,%fp0	 | ...S(B2+...)
-
-
-
-	fmulx		RPRIME(%a6),%fp1	| ...R'S(A1+...)
-	fadds		COSB1,%fp0	| ...B1+S(B2...)
-	fmulx		SPRIME(%a6),%fp0	| ...S'(B1+S(B2+...))
-
-	movel		%d1,-(%sp)	|restore users mode & precision
-	andil		#0xff,%d1		|mask off all exceptions
-	fmovel		%d1,%FPCR
-	faddx		RPRIME(%a6),%fp1	| ...COS(X)
-	bsr		sto_cos		|store cosine result
-	fmovel		(%sp)+,%FPCR	|restore users exceptions
-	fadds		POSNEG1(%a6),%fp0	| ...SIN(X)
-
-	bra		t_frcinx
-
-
-NEVEN:
-|--REGISTERS SAVED SO FAR: FP2.
-
-	fmovex		%fp0,RPRIME(%a6)
-	fmulx		%fp0,%fp0	 | ...FP0 IS S = R*R
-	fmoved		COSB8,%fp1			| ...B8
-	fmoved		SINA7,%fp2			| ...A7
-	fmulx		%fp0,%fp1	 | ...SB8
-	fmovex		%fp0,SPRIME(%a6)
-	fmulx		%fp0,%fp2	 | ...SA7
-	rorl		#1,%d0
-	andil		#0x80000000,%d0
-	faddd		COSB7,%fp1	| ...B7+SB8
-	faddd		SINA6,%fp2	| ...A6+SA7
-	eorl		%d0,RPRIME(%a6)
-	eorl		%d0,SPRIME(%a6)
-	fmulx		%fp0,%fp1	 | ...S(B7+SB8)
-	oril		#0x3F800000,%d0
-	movel		%d0,POSNEG1(%a6)
-	fmulx		%fp0,%fp2	 | ...S(A6+SA7)
-
-	faddd		COSB6,%fp1	| ...B6+S(B7+SB8)
-	faddd		SINA5,%fp2	| ...A5+S(A6+SA7)
-
-	fmulx		%fp0,%fp1	 | ...S(B6+S(B7+SB8))
-	fmulx		%fp0,%fp2	 | ...S(A5+S(A6+SA7))
-
-	faddd		COSB5,%fp1	| ...B5+S(B6+S(B7+SB8))
-	faddd		SINA4,%fp2	| ...A4+S(A5+S(A6+SA7))
-
-	fmulx		%fp0,%fp1	 | ...S(B5+...)
-	fmulx		%fp0,%fp2	 | ...S(A4+...)
-
-	faddd		COSB4,%fp1	| ...B4+S(B5+...)
-	faddd		SINA3,%fp2	| ...A3+S(A4+...)
-
-	fmulx		%fp0,%fp1	 | ...S(B4+...)
-	fmulx		%fp0,%fp2	 | ...S(A3+...)
-
-	faddx		COSB3,%fp1	| ...B3+S(B4+...)
-	faddx		SINA2,%fp2	| ...A2+S(A3+...)
-
-	fmulx		%fp0,%fp1	 | ...S(B3+...)
-	fmulx		%fp0,%fp2	 | ...S(A2+...)
-
-	faddx		COSB2,%fp1	| ...B2+S(B3+...)
-	faddx		SINA1,%fp2	| ...A1+S(A2+...)
-
-	fmulx		%fp0,%fp1	 | ...S(B2+...)
-	fmulx		%fp2,%fp0	 | ...s(a1+...)
-
-
-
-	fadds		COSB1,%fp1	| ...B1+S(B2...)
-	fmulx		RPRIME(%a6),%fp0	| ...R'S(A1+...)
-	fmulx		SPRIME(%a6),%fp1	| ...S'(B1+S(B2+...))
-
-	movel		%d1,-(%sp)	|save users mode & precision
-	andil		#0xff,%d1		|mask off all exceptions
-	fmovel		%d1,%FPCR
-	fadds		POSNEG1(%a6),%fp1	| ...COS(X)
-	bsr		sto_cos		|store cosine result
-	fmovel		(%sp)+,%FPCR	|restore users exceptions
-	faddx		RPRIME(%a6),%fp0	| ...SIN(X)
-
-	bra		t_frcinx
-
-SCBORS:
-	cmpil		#0x3FFF8000,%d0
-	bgt		REDUCEX
-
-
-SCSM:
-	movew		#0x0000,XDCARE(%a6)
-	fmoves		#0x3F800000,%fp1
-
-	movel		%d1,-(%sp)	|save users mode & precision
-	andil		#0xff,%d1		|mask off all exceptions
-	fmovel		%d1,%FPCR
-	fsubs		#0x00800000,%fp1
-	bsr		sto_cos		|store cosine result
-	fmovel		(%sp)+,%FPCR	|restore users exceptions
-	fmovex		X(%a6),%fp0
-	bra		t_frcinx
-
-	|end
diff --git a/ANDROID_3.4.5/arch/m68k/fpsp040/ssinh.S b/ANDROID_3.4.5/arch/m68k/fpsp040/ssinh.S
deleted file mode 100644
index 8a560edc..00000000
--- a/ANDROID_3.4.5/arch/m68k/fpsp040/ssinh.S
+++ /dev/null
@@ -1,134 +0,0 @@
-|
-|	ssinh.sa 3.1 12/10/90
-|
-|       The entry point sSinh computes the hyperbolic sine of
-|       an input argument; sSinhd does the same except for denormalized
-|       input.
-|
-|       Input: Double-extended number X in location pointed to
-|		by address register a0.
-|
-|       Output: The value sinh(X) returned in floating-point register Fp0.
-|
-|       Accuracy and Monotonicity: The returned result is within 3 ulps in
-|               64 significant bit, i.e. within 0.5001 ulp to 53 bits if the
-|               result is subsequently rounded to double precision. The
-|               result is provably monotonic in double precision.
-|
-|       Speed: The program sSINH takes approximately 280 cycles.
-|
-|       Algorithm:
-|
-|       SINH
-|       1. If |X| > 16380 log2, go to 3.
-|
-|       2. (|X| <= 16380 log2) Sinh(X) is obtained by the formulae
-|               y = |X|, sgn = sign(X), and z = expm1(Y),
-|               sinh(X) = sgn*(1/2)*( z + z/(1+z) ).
-|          Exit.
-|
-|       3. If |X| > 16480 log2, go to 5.
-|
-|       4. (16380 log2 < |X| <= 16480 log2)
-|               sinh(X) = sign(X) * exp(|X|)/2.
-|          However, invoking exp(|X|) may cause premature overflow.
-|          Thus, we calculate sinh(X) as follows:
-|             Y       := |X|
-|             sgn     := sign(X)
-|             sgnFact := sgn * 2**(16380)
-|             Y'      := Y - 16381 log2
-|             sinh(X) := sgnFact * exp(Y').
-|          Exit.
-|
-|       5. (|X| > 16480 log2) sinh(X) must overflow. Return
-|          sign(X)*Huge*Huge to generate overflow and an infinity with
-|          the appropriate sign. Huge is the largest finite number in
-|          extended format. Exit.
-|
-
-|		Copyright (C) Motorola, Inc. 1990
-|			All Rights Reserved
-|
-|       For details on the license for this file, please see the
-|       file, README, in this same directory.
-
-|SSINH	idnt	2,1 | Motorola 040 Floating Point Software Package
-
-	|section	8
-
-T1:	.long 0x40C62D38,0xD3D64634 | ... 16381 LOG2 LEAD
-T2:	.long 0x3D6F90AE,0xB1E75CC7 | ... 16381 LOG2 TRAIL
-
-	|xref	t_frcinx
-	|xref	t_ovfl
-	|xref	t_extdnrm
-	|xref	setox
-	|xref	setoxm1
-
-	.global	ssinhd
-ssinhd:
-|--SINH(X) = X FOR DENORMALIZED X
-
-	bra	t_extdnrm
-
-	.global	ssinh
-ssinh:
-	fmovex	(%a0),%fp0	| ...LOAD INPUT
-
-	movel	(%a0),%d0
-	movew	4(%a0),%d0
-	movel	%d0,%a1		| save a copy of original (compacted) operand
-	andl	#0x7FFFFFFF,%d0
-	cmpl	#0x400CB167,%d0
-	bgts	SINHBIG
-
-|--THIS IS THE USUAL CASE, |X| < 16380 LOG2
-|--Y = |X|, Z = EXPM1(Y), SINH(X) = SIGN(X)*(1/2)*( Z + Z/(1+Z) )
-
-	fabsx	%fp0		| ...Y = |X|
-
-	moveml	%a1/%d1,-(%sp)
-	fmovemx %fp0-%fp0,(%a0)
-	clrl	%d1
-	bsr	setoxm1		| ...FP0 IS Z = EXPM1(Y)
-	fmovel	#0,%fpcr
-	moveml	(%sp)+,%a1/%d1
-
-	fmovex	%fp0,%fp1
-	fadds	#0x3F800000,%fp1	| ...1+Z
-	fmovex	%fp0,-(%sp)
-	fdivx	%fp1,%fp0		| ...Z/(1+Z)
-	movel	%a1,%d0
-	andl	#0x80000000,%d0
-	orl	#0x3F000000,%d0
-	faddx	(%sp)+,%fp0
-	movel	%d0,-(%sp)
-
-	fmovel	%d1,%fpcr
-	fmuls	(%sp)+,%fp0	|last fp inst - possible exceptions set
-
-	bra	t_frcinx
-
-SINHBIG:
-	cmpl	#0x400CB2B3,%d0
-	bgt	t_ovfl
-	fabsx	%fp0
-	fsubd	T1(%pc),%fp0	| ...(|X|-16381LOG2_LEAD)
-	movel	#0,-(%sp)
-	movel	#0x80000000,-(%sp)
-	movel	%a1,%d0
-	andl	#0x80000000,%d0
-	orl	#0x7FFB0000,%d0
-	movel	%d0,-(%sp)	| ...EXTENDED FMT
-	fsubd	T2(%pc),%fp0	| ...|X| - 16381 LOG2, ACCURATE
-
-	movel	%d1,-(%sp)
-	clrl	%d1
-	fmovemx %fp0-%fp0,(%a0)
-	bsr	setox
-	fmovel	(%sp)+,%fpcr
-
-	fmulx	(%sp)+,%fp0	|possible exception
-	bra	t_frcinx
-
-	|end
diff --git a/ANDROID_3.4.5/arch/m68k/fpsp040/stan.S b/ANDROID_3.4.5/arch/m68k/fpsp040/stan.S
deleted file mode 100644
index f8553aae..00000000
--- a/ANDROID_3.4.5/arch/m68k/fpsp040/stan.S
+++ /dev/null
@@ -1,454 +0,0 @@
-|
-|	stan.sa 3.3 7/29/91
-|
-|	The entry point stan computes the tangent of
-|	an input argument;
-|	stand does the same except for denormalized input.
-|
-|	Input: Double-extended number X in location pointed to
-|		by address register a0.
-|
-|	Output: The value tan(X) returned in floating-point register Fp0.
-|
-|	Accuracy and Monotonicity: The returned result is within 3 ulp in
-|		64 significant bit, i.e. within 0.5001 ulp to 53 bits if the
-|		result is subsequently rounded to double precision. The
-|		result is provably monotonic in double precision.
-|
-|	Speed: The program sTAN takes approximately 170 cycles for
-|		input argument X such that |X| < 15Pi, which is the usual
-|		situation.
-|
-|	Algorithm:
-|
-|	1. If |X| >= 15Pi or |X| < 2**(-40), go to 6.
-|
-|	2. Decompose X as X = N(Pi/2) + r where |r| <= Pi/4. Let
-|		k = N mod 2, so in particular, k = 0 or 1.
-|
-|	3. If k is odd, go to 5.
-|
-|	4. (k is even) Tan(X) = tan(r) and tan(r) is approximated by a
-|		rational function U/V where
-|		U = r + r*s*(P1 + s*(P2 + s*P3)), and
-|		V = 1 + s*(Q1 + s*(Q2 + s*(Q3 + s*Q4))),  s = r*r.
-|		Exit.
-|
-|	4. (k is odd) Tan(X) = -cot(r). Since tan(r) is approximated by a
-|		rational function U/V where
-|		U = r + r*s*(P1 + s*(P2 + s*P3)), and
-|		V = 1 + s*(Q1 + s*(Q2 + s*(Q3 + s*Q4))), s = r*r,
-|		-Cot(r) = -V/U. Exit.
-|
-|	6. If |X| > 1, go to 8.
-|
-|	7. (|X|<2**(-40)) Tan(X) = X. Exit.
-|
-|	8. Overwrite X by X := X rem 2Pi. Now that |X| <= Pi, go back to 2.
-|
-
-|		Copyright (C) Motorola, Inc. 1990
-|			All Rights Reserved
-|
-|       For details on the license for this file, please see the
-|       file, README, in this same directory.
-
-|STAN	idnt	2,1 | Motorola 040 Floating Point Software Package
-
-	|section	8
-
-#include "fpsp.h"
-
-BOUNDS1:	.long 0x3FD78000,0x4004BC7E
-TWOBYPI:	.long 0x3FE45F30,0x6DC9C883
-
-TANQ4:	.long 0x3EA0B759,0xF50F8688
-TANP3:	.long 0xBEF2BAA5,0xA8924F04
-
-TANQ3:	.long 0xBF346F59,0xB39BA65F,0x00000000,0x00000000
-
-TANP2:	.long 0x3FF60000,0xE073D3FC,0x199C4A00,0x00000000
-
-TANQ2:	.long 0x3FF90000,0xD23CD684,0x15D95FA1,0x00000000
-
-TANP1:	.long 0xBFFC0000,0x8895A6C5,0xFB423BCA,0x00000000
-
-TANQ1:	.long 0xBFFD0000,0xEEF57E0D,0xA84BC8CE,0x00000000
-
-INVTWOPI: .long 0x3FFC0000,0xA2F9836E,0x4E44152A,0x00000000
-
-TWOPI1:	.long 0x40010000,0xC90FDAA2,0x00000000,0x00000000
-TWOPI2:	.long 0x3FDF0000,0x85A308D4,0x00000000,0x00000000
-
-|--N*PI/2, -32 <= N <= 32, IN A LEADING TERM IN EXT. AND TRAILING
-|--TERM IN SGL. NOTE THAT PI IS 64-BIT LONG, THUS N*PI/2 IS AT
-|--MOST 69 BITS LONG.
-	.global	PITBL
-PITBL:
-  .long  0xC0040000,0xC90FDAA2,0x2168C235,0x21800000
-  .long  0xC0040000,0xC2C75BCD,0x105D7C23,0xA0D00000
-  .long  0xC0040000,0xBC7EDCF7,0xFF523611,0xA1E80000
-  .long  0xC0040000,0xB6365E22,0xEE46F000,0x21480000
-  .long  0xC0040000,0xAFEDDF4D,0xDD3BA9EE,0xA1200000
-  .long  0xC0040000,0xA9A56078,0xCC3063DD,0x21FC0000
-  .long  0xC0040000,0xA35CE1A3,0xBB251DCB,0x21100000
-  .long  0xC0040000,0x9D1462CE,0xAA19D7B9,0xA1580000
-  .long  0xC0040000,0x96CBE3F9,0x990E91A8,0x21E00000
-  .long  0xC0040000,0x90836524,0x88034B96,0x20B00000
-  .long  0xC0040000,0x8A3AE64F,0x76F80584,0xA1880000
-  .long  0xC0040000,0x83F2677A,0x65ECBF73,0x21C40000
-  .long  0xC0030000,0xFB53D14A,0xA9C2F2C2,0x20000000
-  .long  0xC0030000,0xEEC2D3A0,0x87AC669F,0x21380000
-  .long  0xC0030000,0xE231D5F6,0x6595DA7B,0xA1300000
-  .long  0xC0030000,0xD5A0D84C,0x437F4E58,0x9FC00000
-  .long  0xC0030000,0xC90FDAA2,0x2168C235,0x21000000
-  .long  0xC0030000,0xBC7EDCF7,0xFF523611,0xA1680000
-  .long  0xC0030000,0xAFEDDF4D,0xDD3BA9EE,0xA0A00000
-  .long  0xC0030000,0xA35CE1A3,0xBB251DCB,0x20900000
-  .long  0xC0030000,0x96CBE3F9,0x990E91A8,0x21600000
-  .long  0xC0030000,0x8A3AE64F,0x76F80584,0xA1080000
-  .long  0xC0020000,0xFB53D14A,0xA9C2F2C2,0x1F800000
-  .long  0xC0020000,0xE231D5F6,0x6595DA7B,0xA0B00000
-  .long  0xC0020000,0xC90FDAA2,0x2168C235,0x20800000
-  .long  0xC0020000,0xAFEDDF4D,0xDD3BA9EE,0xA0200000
-  .long  0xC0020000,0x96CBE3F9,0x990E91A8,0x20E00000
-  .long  0xC0010000,0xFB53D14A,0xA9C2F2C2,0x1F000000
-  .long  0xC0010000,0xC90FDAA2,0x2168C235,0x20000000
-  .long  0xC0010000,0x96CBE3F9,0x990E91A8,0x20600000
-  .long  0xC0000000,0xC90FDAA2,0x2168C235,0x1F800000
-  .long  0xBFFF0000,0xC90FDAA2,0x2168C235,0x1F000000
-  .long  0x00000000,0x00000000,0x00000000,0x00000000
-  .long  0x3FFF0000,0xC90FDAA2,0x2168C235,0x9F000000
-  .long  0x40000000,0xC90FDAA2,0x2168C235,0x9F800000
-  .long  0x40010000,0x96CBE3F9,0x990E91A8,0xA0600000
-  .long  0x40010000,0xC90FDAA2,0x2168C235,0xA0000000
-  .long  0x40010000,0xFB53D14A,0xA9C2F2C2,0x9F000000
-  .long  0x40020000,0x96CBE3F9,0x990E91A8,0xA0E00000
-  .long  0x40020000,0xAFEDDF4D,0xDD3BA9EE,0x20200000
-  .long  0x40020000,0xC90FDAA2,0x2168C235,0xA0800000
-  .long  0x40020000,0xE231D5F6,0x6595DA7B,0x20B00000
-  .long  0x40020000,0xFB53D14A,0xA9C2F2C2,0x9F800000
-  .long  0x40030000,0x8A3AE64F,0x76F80584,0x21080000
-  .long  0x40030000,0x96CBE3F9,0x990E91A8,0xA1600000
-  .long  0x40030000,0xA35CE1A3,0xBB251DCB,0xA0900000
-  .long  0x40030000,0xAFEDDF4D,0xDD3BA9EE,0x20A00000
-  .long  0x40030000,0xBC7EDCF7,0xFF523611,0x21680000
-  .long  0x40030000,0xC90FDAA2,0x2168C235,0xA1000000
-  .long  0x40030000,0xD5A0D84C,0x437F4E58,0x1FC00000
-  .long  0x40030000,0xE231D5F6,0x6595DA7B,0x21300000
-  .long  0x40030000,0xEEC2D3A0,0x87AC669F,0xA1380000
-  .long  0x40030000,0xFB53D14A,0xA9C2F2C2,0xA0000000
-  .long  0x40040000,0x83F2677A,0x65ECBF73,0xA1C40000
-  .long  0x40040000,0x8A3AE64F,0x76F80584,0x21880000
-  .long  0x40040000,0x90836524,0x88034B96,0xA0B00000
-  .long  0x40040000,0x96CBE3F9,0x990E91A8,0xA1E00000
-  .long  0x40040000,0x9D1462CE,0xAA19D7B9,0x21580000
-  .long  0x40040000,0xA35CE1A3,0xBB251DCB,0xA1100000
-  .long  0x40040000,0xA9A56078,0xCC3063DD,0xA1FC0000
-  .long  0x40040000,0xAFEDDF4D,0xDD3BA9EE,0x21200000
-  .long  0x40040000,0xB6365E22,0xEE46F000,0xA1480000
-  .long  0x40040000,0xBC7EDCF7,0xFF523611,0x21E80000
-  .long  0x40040000,0xC2C75BCD,0x105D7C23,0x20D00000
-  .long  0x40040000,0xC90FDAA2,0x2168C235,0xA1800000
-
-	.set	INARG,FP_SCR4
-
-	.set	TWOTO63,L_SCR1
-	.set	ENDFLAG,L_SCR2
-	.set	N,L_SCR3
-
-	| xref	t_frcinx
-	|xref	t_extdnrm
-
-	.global	stand
-stand:
-|--TAN(X) = X FOR DENORMALIZED X
-
-	bra		t_extdnrm
-
-	.global	stan
-stan:
-	fmovex		(%a0),%fp0	| ...LOAD INPUT
-
-	movel		(%a0),%d0
-	movew		4(%a0),%d0
-	andil		#0x7FFFFFFF,%d0
-
-	cmpil		#0x3FD78000,%d0		| ...|X| >= 2**(-40)?
-	bges		TANOK1
-	bra		TANSM
-TANOK1:
-	cmpil		#0x4004BC7E,%d0		| ...|X| < 15 PI?
-	blts		TANMAIN
-	bra		REDUCEX
-
-
-TANMAIN:
-|--THIS IS THE USUAL CASE, |X| <= 15 PI.
-|--THE ARGUMENT REDUCTION IS DONE BY TABLE LOOK UP.
-	fmovex		%fp0,%fp1
-	fmuld		TWOBYPI,%fp1	| ...X*2/PI
-
-|--HIDE THE NEXT TWO INSTRUCTIONS
-	leal		PITBL+0x200,%a1 | ...TABLE OF N*PI/2, N = -32,...,32
-
-|--FP1 IS NOW READY
-	fmovel		%fp1,%d0		| ...CONVERT TO INTEGER
-
-	asll		#4,%d0
-	addal		%d0,%a1		| ...ADDRESS N*PIBY2 IN Y1, Y2
-
-	fsubx		(%a1)+,%fp0	| ...X-Y1
-|--HIDE THE NEXT ONE
-
-	fsubs		(%a1),%fp0	| ...FP0 IS R = (X-Y1)-Y2
-
-	rorl		#5,%d0
-	andil		#0x80000000,%d0	| ...D0 WAS ODD IFF D0 < 0
-
-TANCONT:
-
-	cmpil		#0,%d0
-	blt		NODD
-
-	fmovex		%fp0,%fp1
-	fmulx		%fp1,%fp1		| ...S = R*R
-
-	fmoved		TANQ4,%fp3
-	fmoved		TANP3,%fp2
-
-	fmulx		%fp1,%fp3		| ...SQ4
-	fmulx		%fp1,%fp2		| ...SP3
-
-	faddd		TANQ3,%fp3	| ...Q3+SQ4
-	faddx		TANP2,%fp2	| ...P2+SP3
-
-	fmulx		%fp1,%fp3		| ...S(Q3+SQ4)
-	fmulx		%fp1,%fp2		| ...S(P2+SP3)
-
-	faddx		TANQ2,%fp3	| ...Q2+S(Q3+SQ4)
-	faddx		TANP1,%fp2	| ...P1+S(P2+SP3)
-
-	fmulx		%fp1,%fp3		| ...S(Q2+S(Q3+SQ4))
-	fmulx		%fp1,%fp2		| ...S(P1+S(P2+SP3))
-
-	faddx		TANQ1,%fp3	| ...Q1+S(Q2+S(Q3+SQ4))
-	fmulx		%fp0,%fp2		| ...RS(P1+S(P2+SP3))
-
-	fmulx		%fp3,%fp1		| ...S(Q1+S(Q2+S(Q3+SQ4)))
-
-
-	faddx		%fp2,%fp0		| ...R+RS(P1+S(P2+SP3))
-
-
-	fadds		#0x3F800000,%fp1	| ...1+S(Q1+...)
-
-	fmovel		%d1,%fpcr		|restore users exceptions
-	fdivx		%fp1,%fp0		|last inst - possible exception set
-
-	bra		t_frcinx
-
-NODD:
-	fmovex		%fp0,%fp1
-	fmulx		%fp0,%fp0		| ...S = R*R
-
-	fmoved		TANQ4,%fp3
-	fmoved		TANP3,%fp2
-
-	fmulx		%fp0,%fp3		| ...SQ4
-	fmulx		%fp0,%fp2		| ...SP3
-
-	faddd		TANQ3,%fp3	| ...Q3+SQ4
-	faddx		TANP2,%fp2	| ...P2+SP3
-
-	fmulx		%fp0,%fp3		| ...S(Q3+SQ4)
-	fmulx		%fp0,%fp2		| ...S(P2+SP3)
-
-	faddx		TANQ2,%fp3	| ...Q2+S(Q3+SQ4)
-	faddx		TANP1,%fp2	| ...P1+S(P2+SP3)
-
-	fmulx		%fp0,%fp3		| ...S(Q2+S(Q3+SQ4))
-	fmulx		%fp0,%fp2		| ...S(P1+S(P2+SP3))
-
-	faddx		TANQ1,%fp3	| ...Q1+S(Q2+S(Q3+SQ4))
-	fmulx		%fp1,%fp2		| ...RS(P1+S(P2+SP3))
-
-	fmulx		%fp3,%fp0		| ...S(Q1+S(Q2+S(Q3+SQ4)))
-
-
-	faddx		%fp2,%fp1		| ...R+RS(P1+S(P2+SP3))
-	fadds		#0x3F800000,%fp0	| ...1+S(Q1+...)
-
-
-	fmovex		%fp1,-(%sp)
-	eoril		#0x80000000,(%sp)
-
-	fmovel		%d1,%fpcr		|restore users exceptions
-	fdivx		(%sp)+,%fp0	|last inst - possible exception set
-
-	bra		t_frcinx
-
-TANBORS:
-|--IF |X| > 15PI, WE USE THE GENERAL ARGUMENT REDUCTION.
-|--IF |X| < 2**(-40), RETURN X OR 1.
-	cmpil		#0x3FFF8000,%d0
-	bgts		REDUCEX
-
-TANSM:
-
-	fmovex		%fp0,-(%sp)
-	fmovel		%d1,%fpcr		 |restore users exceptions
-	fmovex		(%sp)+,%fp0	|last inst - possible exception set
-
-	bra		t_frcinx
-
-
-REDUCEX:
-|--WHEN REDUCEX IS USED, THE CODE WILL INEVITABLY BE SLOW.
-|--THIS REDUCTION METHOD, HOWEVER, IS MUCH FASTER THAN USING
-|--THE REMAINDER INSTRUCTION WHICH IS NOW IN SOFTWARE.
-
-	fmovemx	%fp2-%fp5,-(%a7)	| ...save FP2 through FP5
-	movel		%d2,-(%a7)
-        fmoves         #0x00000000,%fp1
-
-|--If compact form of abs(arg) in d0=$7ffeffff, argument is so large that
-|--there is a danger of unwanted overflow in first LOOP iteration.  In this
-|--case, reduce argument by one remainder step to make subsequent reduction
-|--safe.
-	cmpil	#0x7ffeffff,%d0		|is argument dangerously large?
-	bnes	LOOP
-	movel	#0x7ffe0000,FP_SCR2(%a6)	|yes
-|					;create 2**16383*PI/2
-	movel	#0xc90fdaa2,FP_SCR2+4(%a6)
-	clrl	FP_SCR2+8(%a6)
-	ftstx	%fp0			|test sign of argument
-	movel	#0x7fdc0000,FP_SCR3(%a6)	|create low half of 2**16383*
-|					;PI/2 at FP_SCR3
-	movel	#0x85a308d3,FP_SCR3+4(%a6)
-	clrl   FP_SCR3+8(%a6)
-	fblt	red_neg
-	orw	#0x8000,FP_SCR2(%a6)	|positive arg
-	orw	#0x8000,FP_SCR3(%a6)
-red_neg:
-	faddx  FP_SCR2(%a6),%fp0		|high part of reduction is exact
-	fmovex  %fp0,%fp1		|save high result in fp1
-	faddx  FP_SCR3(%a6),%fp0		|low part of reduction
-	fsubx  %fp0,%fp1			|determine low component of result
-	faddx  FP_SCR3(%a6),%fp1		|fp0/fp1 are reduced argument.
-
-|--ON ENTRY, FP0 IS X, ON RETURN, FP0 IS X REM PI/2, |X| <= PI/4.
-|--integer quotient will be stored in N
-|--Intermediate remainder is 66-bit long; (R,r) in (FP0,FP1)
-
-LOOP:
-	fmovex		%fp0,INARG(%a6)	| ...+-2**K * F, 1 <= F < 2
-	movew		INARG(%a6),%d0
-        movel          %d0,%a1		| ...save a copy of D0
-	andil		#0x00007FFF,%d0
-	subil		#0x00003FFF,%d0	| ...D0 IS K
-	cmpil		#28,%d0
-	bles		LASTLOOP
-CONTLOOP:
-	subil		#27,%d0	 | ...D0 IS L := K-27
-	movel		#0,ENDFLAG(%a6)
-	bras		WORK
-LASTLOOP:
-	clrl		%d0		| ...D0 IS L := 0
-	movel		#1,ENDFLAG(%a6)
-
-WORK:
-|--FIND THE REMAINDER OF (R,r) W.R.T.	2**L * (PI/2). L IS SO CHOSEN
-|--THAT	INT( X * (2/PI) / 2**(L) ) < 2**29.
-
-|--CREATE 2**(-L) * (2/PI), SIGN(INARG)*2**(63),
-|--2**L * (PIby2_1), 2**L * (PIby2_2)
-
-	movel		#0x00003FFE,%d2	| ...BIASED EXPO OF 2/PI
-	subl		%d0,%d2		| ...BIASED EXPO OF 2**(-L)*(2/PI)
-
-	movel		#0xA2F9836E,FP_SCR1+4(%a6)
-	movel		#0x4E44152A,FP_SCR1+8(%a6)
-	movew		%d2,FP_SCR1(%a6)	| ...FP_SCR1 is 2**(-L)*(2/PI)
-
-	fmovex		%fp0,%fp2
-	fmulx		FP_SCR1(%a6),%fp2
-|--WE MUST NOW FIND INT(FP2). SINCE WE NEED THIS VALUE IN
-|--FLOATING POINT FORMAT, THE TWO FMOVE'S	FMOVE.L FP <--> N
-|--WILL BE TOO INEFFICIENT. THE WAY AROUND IT IS THAT
-|--(SIGN(INARG)*2**63	+	FP2) - SIGN(INARG)*2**63 WILL GIVE
-|--US THE DESIRED VALUE IN FLOATING POINT.
-
-|--HIDE SIX CYCLES OF INSTRUCTION
-        movel		%a1,%d2
-        swap		%d2
-	andil		#0x80000000,%d2
-	oril		#0x5F000000,%d2	| ...D2 IS SIGN(INARG)*2**63 IN SGL
-	movel		%d2,TWOTO63(%a6)
-
-	movel		%d0,%d2
-	addil		#0x00003FFF,%d2	| ...BIASED EXPO OF 2**L * (PI/2)
-
-|--FP2 IS READY
-	fadds		TWOTO63(%a6),%fp2	| ...THE FRACTIONAL PART OF FP1 IS ROUNDED
-
-|--HIDE 4 CYCLES OF INSTRUCTION; creating 2**(L)*Piby2_1  and  2**(L)*Piby2_2
-        movew		%d2,FP_SCR2(%a6)
-	clrw           FP_SCR2+2(%a6)
-	movel		#0xC90FDAA2,FP_SCR2+4(%a6)
-	clrl		FP_SCR2+8(%a6)		| ...FP_SCR2 is  2**(L) * Piby2_1
-
-|--FP2 IS READY
-	fsubs		TWOTO63(%a6),%fp2		| ...FP2 is N
-
-	addil		#0x00003FDD,%d0
-        movew		%d0,FP_SCR3(%a6)
-	clrw           FP_SCR3+2(%a6)
-	movel		#0x85A308D3,FP_SCR3+4(%a6)
-	clrl		FP_SCR3+8(%a6)		| ...FP_SCR3 is 2**(L) * Piby2_2
-
-	movel		ENDFLAG(%a6),%d0
-
-|--We are now ready to perform (R+r) - N*P1 - N*P2, P1 = 2**(L) * Piby2_1 and
-|--P2 = 2**(L) * Piby2_2
-	fmovex		%fp2,%fp4
-	fmulx		FP_SCR2(%a6),%fp4		| ...W = N*P1
-	fmovex		%fp2,%fp5
-	fmulx		FP_SCR3(%a6),%fp5		| ...w = N*P2
-	fmovex		%fp4,%fp3
-|--we want P+p = W+w  but  |p| <= half ulp of P
-|--Then, we need to compute  A := R-P   and  a := r-p
-	faddx		%fp5,%fp3			| ...FP3 is P
-	fsubx		%fp3,%fp4			| ...W-P
-
-	fsubx		%fp3,%fp0			| ...FP0 is A := R - P
-        faddx		%fp5,%fp4			| ...FP4 is p = (W-P)+w
-
-	fmovex		%fp0,%fp3			| ...FP3 A
-	fsubx		%fp4,%fp1			| ...FP1 is a := r - p
-
-|--Now we need to normalize (A,a) to  "new (R,r)" where R+r = A+a but
-|--|r| <= half ulp of R.
-	faddx		%fp1,%fp0			| ...FP0 is R := A+a
-|--No need to calculate r if this is the last loop
-	cmpil		#0,%d0
-	bgt		RESTORE
-
-|--Need to calculate r
-	fsubx		%fp0,%fp3			| ...A-R
-	faddx		%fp3,%fp1			| ...FP1 is r := (A-R)+a
-	bra		LOOP
-
-RESTORE:
-        fmovel		%fp2,N(%a6)
-	movel		(%a7)+,%d2
-	fmovemx	(%a7)+,%fp2-%fp5
-
-
-	movel		N(%a6),%d0
-        rorl		#1,%d0
-
-
-	bra		TANCONT
-
-	|end
diff --git a/ANDROID_3.4.5/arch/m68k/fpsp040/stanh.S b/ANDROID_3.4.5/arch/m68k/fpsp040/stanh.S
deleted file mode 100644
index 7e12e59e..00000000
--- a/ANDROID_3.4.5/arch/m68k/fpsp040/stanh.S
+++ /dev/null
@@ -1,184 +0,0 @@
-|
-|	stanh.sa 3.1 12/10/90
-|
-|	The entry point sTanh computes the hyperbolic tangent of
-|	an input argument; sTanhd does the same except for denormalized
-|	input.
-|
-|	Input: Double-extended number X in location pointed to
-|		by address register a0.
-|
-|	Output: The value tanh(X) returned in floating-point register Fp0.
-|
-|	Accuracy and Monotonicity: The returned result is within 3 ulps in
-|		64 significant bit, i.e. within 0.5001 ulp to 53 bits if the
-|		result is subsequently rounded to double precision. The
-|		result is provably monotonic in double precision.
-|
-|	Speed: The program stanh takes approximately 270 cycles.
-|
-|	Algorithm:
-|
-|	TANH
-|	1. If |X| >= (5/2) log2 or |X| <= 2**(-40), go to 3.
-|
-|	2. (2**(-40) < |X| < (5/2) log2) Calculate tanh(X) by
-|		sgn := sign(X), y := 2|X|, z := expm1(Y), and
-|		tanh(X) = sgn*( z/(2+z) ).
-|		Exit.
-|
-|	3. (|X| <= 2**(-40) or |X| >= (5/2) log2). If |X| < 1,
-|		go to 7.
-|
-|	4. (|X| >= (5/2) log2) If |X| >= 50 log2, go to 6.
-|
-|	5. ((5/2) log2 <= |X| < 50 log2) Calculate tanh(X) by
-|		sgn := sign(X), y := 2|X|, z := exp(Y),
-|		tanh(X) = sgn - [ sgn*2/(1+z) ].
-|		Exit.
-|
-|	6. (|X| >= 50 log2) Tanh(X) = +-1 (round to nearest). Thus, we
-|		calculate Tanh(X) by
-|		sgn := sign(X), Tiny := 2**(-126),
-|		tanh(X) := sgn - sgn*Tiny.
-|		Exit.
-|
-|	7. (|X| < 2**(-40)). Tanh(X) = X.	Exit.
-|
-
-|		Copyright (C) Motorola, Inc. 1990
-|			All Rights Reserved
-|
-|       For details on the license for this file, please see the
-|       file, README, in this same directory.
-
-|STANH	idnt	2,1 | Motorola 040 Floating Point Software Package
-
-	|section	8
-
-#include "fpsp.h"
-
-	.set	X,FP_SCR5
-	.set	XDCARE,X+2
-	.set	XFRAC,X+4
-
-	.set	SGN,L_SCR3
-
-	.set	V,FP_SCR6
-
-BOUNDS1:	.long 0x3FD78000,0x3FFFDDCE | ... 2^(-40), (5/2)LOG2
-
-	|xref	t_frcinx
-	|xref	t_extdnrm
-	|xref	setox
-	|xref	setoxm1
-
-	.global	stanhd
-stanhd:
-|--TANH(X) = X FOR DENORMALIZED X
-
-	bra		t_extdnrm
-
-	.global	stanh
-stanh:
-	fmovex		(%a0),%fp0	| ...LOAD INPUT
-
-	fmovex		%fp0,X(%a6)
-	movel		(%a0),%d0
-	movew		4(%a0),%d0
-	movel		%d0,X(%a6)
-	andl		#0x7FFFFFFF,%d0
-	cmp2l		BOUNDS1(%pc),%d0	| ...2**(-40) < |X| < (5/2)LOG2 ?
-	bcss		TANHBORS
-
-|--THIS IS THE USUAL CASE
-|--Y = 2|X|, Z = EXPM1(Y), TANH(X) = SIGN(X) * Z / (Z+2).
-
-	movel		X(%a6),%d0
-	movel		%d0,SGN(%a6)
-	andl		#0x7FFF0000,%d0
-	addl		#0x00010000,%d0	| ...EXPONENT OF 2|X|
-	movel		%d0,X(%a6)
-	andl		#0x80000000,SGN(%a6)
-	fmovex		X(%a6),%fp0		| ...FP0 IS Y = 2|X|
-
-	movel		%d1,-(%a7)
-	clrl		%d1
-	fmovemx	%fp0-%fp0,(%a0)
-	bsr		setoxm1		| ...FP0 IS Z = EXPM1(Y)
-	movel		(%a7)+,%d1
-
-	fmovex		%fp0,%fp1
-	fadds		#0x40000000,%fp1	| ...Z+2
-	movel		SGN(%a6),%d0
-	fmovex		%fp1,V(%a6)
-	eorl		%d0,V(%a6)
-
-	fmovel		%d1,%FPCR		|restore users exceptions
-	fdivx		V(%a6),%fp0
-	bra		t_frcinx
-
-TANHBORS:
-	cmpl		#0x3FFF8000,%d0
-	blt		TANHSM
-
-	cmpl		#0x40048AA1,%d0
-	bgt		TANHHUGE
-
-|-- (5/2) LOG2 < |X| < 50 LOG2,
-|--TANH(X) = 1 - (2/[EXP(2X)+1]). LET Y = 2|X|, SGN = SIGN(X),
-|--TANH(X) = SGN -	SGN*2/[EXP(Y)+1].
-
-	movel		X(%a6),%d0
-	movel		%d0,SGN(%a6)
-	andl		#0x7FFF0000,%d0
-	addl		#0x00010000,%d0	| ...EXPO OF 2|X|
-	movel		%d0,X(%a6)		| ...Y = 2|X|
-	andl		#0x80000000,SGN(%a6)
-	movel		SGN(%a6),%d0
-	fmovex		X(%a6),%fp0		| ...Y = 2|X|
-
-	movel		%d1,-(%a7)
-	clrl		%d1
-	fmovemx	%fp0-%fp0,(%a0)
-	bsr		setox		| ...FP0 IS EXP(Y)
-	movel		(%a7)+,%d1
-	movel		SGN(%a6),%d0
-	fadds		#0x3F800000,%fp0	| ...EXP(Y)+1
-
-	eorl		#0xC0000000,%d0	| ...-SIGN(X)*2
-	fmoves		%d0,%fp1		| ...-SIGN(X)*2 IN SGL FMT
-	fdivx		%fp0,%fp1		| ...-SIGN(X)2 / [EXP(Y)+1 ]
-
-	movel		SGN(%a6),%d0
-	orl		#0x3F800000,%d0	| ...SGN
-	fmoves		%d0,%fp0		| ...SGN IN SGL FMT
-
-	fmovel		%d1,%FPCR		|restore users exceptions
-	faddx		%fp1,%fp0
-
-	bra		t_frcinx
-
-TANHSM:
-	movew		#0x0000,XDCARE(%a6)
-
-	fmovel		%d1,%FPCR		|restore users exceptions
-	fmovex		X(%a6),%fp0		|last inst - possible exception set
-
-	bra		t_frcinx
-
-TANHHUGE:
-|---RETURN SGN(X) - SGN(X)EPS
-	movel		X(%a6),%d0
-	andl		#0x80000000,%d0
-	orl		#0x3F800000,%d0
-	fmoves		%d0,%fp0
-	andl		#0x80000000,%d0
-	eorl		#0x80800000,%d0	| ...-SIGN(X)*EPS
-
-	fmovel		%d1,%FPCR		|restore users exceptions
-	fadds		%d0,%fp0
-
-	bra		t_frcinx
-
-	|end
diff --git a/ANDROID_3.4.5/arch/m68k/fpsp040/sto_res.S b/ANDROID_3.4.5/arch/m68k/fpsp040/sto_res.S
deleted file mode 100644
index 484b47d4..00000000
--- a/ANDROID_3.4.5/arch/m68k/fpsp040/sto_res.S
+++ /dev/null
@@ -1,97 +0,0 @@
-|
-|	sto_res.sa 3.1 12/10/90
-|
-|	Takes the result and puts it in where the user expects it.
-|	Library functions return result in fp0.	If fp0 is not the
-|	users destination register then fp0 is moved to the
-|	correct floating-point destination register.  fp0 and fp1
-|	are then restored to the original contents.
-|
-|	Input:	result in fp0,fp1
-|
-|		d2 & a0 should be kept unmodified
-|
-|	Output:	moves the result to the true destination reg or mem
-|
-|	Modifies: destination floating point register
-|
-
-|		Copyright (C) Motorola, Inc. 1990
-|			All Rights Reserved
-|
-|       For details on the license for this file, please see the
-|       file, README, in this same directory.
-
-STO_RES:	|idnt	2,1 | Motorola 040 Floating Point Software Package
-
-
-	|section	8
-
-#include "fpsp.h"
-
-	.global	sto_cos
-sto_cos:
-	bfextu		CMDREG1B(%a6){#13:#3},%d0	|extract cos destination
-	cmpib		#3,%d0		|check for fp0/fp1 cases
-	bles		c_fp0123
-	fmovemx	%fp1-%fp1,-(%a7)
-	moveql		#7,%d1
-	subl		%d0,%d1		|d1 = 7- (dest. reg. no.)
-	clrl		%d0
-	bsetl		%d1,%d0		|d0 is dynamic register mask
-	fmovemx	(%a7)+,%d0
-	rts
-c_fp0123:
-	cmpib		#0,%d0
-	beqs		c_is_fp0
-	cmpib		#1,%d0
-	beqs		c_is_fp1
-	cmpib		#2,%d0
-	beqs		c_is_fp2
-c_is_fp3:
-	fmovemx	%fp1-%fp1,USER_FP3(%a6)
-	rts
-c_is_fp2:
-	fmovemx	%fp1-%fp1,USER_FP2(%a6)
-	rts
-c_is_fp1:
-	fmovemx	%fp1-%fp1,USER_FP1(%a6)
-	rts
-c_is_fp0:
-	fmovemx	%fp1-%fp1,USER_FP0(%a6)
-	rts
-
-
-	.global	sto_res
-sto_res:
-	bfextu		CMDREG1B(%a6){#6:#3},%d0	|extract destination register
-	cmpib		#3,%d0		|check for fp0/fp1 cases
-	bles		fp0123
-	fmovemx	%fp0-%fp0,-(%a7)
-	moveql		#7,%d1
-	subl		%d0,%d1		|d1 = 7- (dest. reg. no.)
-	clrl		%d0
-	bsetl		%d1,%d0		|d0 is dynamic register mask
-	fmovemx	(%a7)+,%d0
-	rts
-fp0123:
-	cmpib		#0,%d0
-	beqs		is_fp0
-	cmpib		#1,%d0
-	beqs		is_fp1
-	cmpib		#2,%d0
-	beqs		is_fp2
-is_fp3:
-	fmovemx	%fp0-%fp0,USER_FP3(%a6)
-	rts
-is_fp2:
-	fmovemx	%fp0-%fp0,USER_FP2(%a6)
-	rts
-is_fp1:
-	fmovemx	%fp0-%fp0,USER_FP1(%a6)
-	rts
-is_fp0:
-	fmovemx	%fp0-%fp0,USER_FP0(%a6)
-	rts
-
-	|end
diff --git a/ANDROID_3.4.5/arch/m68k/fpsp040/stwotox.S b/ANDROID_3.4.5/arch/m68k/fpsp040/stwotox.S
deleted file mode 100644
index 0d5e6a14..00000000
--- a/ANDROID_3.4.5/arch/m68k/fpsp040/stwotox.S
+++ /dev/null
@@ -1,426 +0,0 @@
-|
-|	stwotox.sa 3.1 12/10/90
-|
-|	stwotox  --- 2**X
-|	stwotoxd --- 2**X for denormalized X
-|	stentox  --- 10**X
-|	stentoxd --- 10**X for denormalized X
-|
-|	Input: Double-extended number X in location pointed to
-|		by address register a0.
-|
-|	Output: The function values are returned in Fp0.
-|
-|	Accuracy and Monotonicity: The returned result is within 2 ulps in
-|		64 significant bit, i.e. within 0.5001 ulp to 53 bits if the
-|		result is subsequently rounded to double precision. The
-|		result is provably monotonic in double precision.
-|
-|	Speed: The program stwotox takes approximately 190 cycles and the
-|		program stentox takes approximately 200 cycles.
-|
-|	Algorithm:
-|
-|	twotox
-|	1. If |X| > 16480, go to ExpBig.
-|
-|	2. If |X| < 2**(-70), go to ExpSm.
-|
-|	3. Decompose X as X = N/64 + r where |r| <= 1/128. Furthermore
-|		decompose N as
-|		 N = 64(M + M') + j,  j = 0,1,2,...,63.
-|
-|	4. Overwrite r := r * log2. Then
-|		2**X = 2**(M') * 2**(M) * 2**(j/64) * exp(r).
-|		Go to expr to compute that expression.
-|
-|	tentox
-|	1. If |X| > 16480*log_10(2) (base 10 log of 2), go to ExpBig.
-|
-|	2. If |X| < 2**(-70), go to ExpSm.
-|
-|	3. Set y := X*log_2(10)*64 (base 2 log of 10). Set
-|		N := round-to-int(y). Decompose N as
-|		 N = 64(M + M') + j,  j = 0,1,2,...,63.
-|
-|	4. Define r as
-|		r := ((X - N*L1)-N*L2) * L10
-|		where L1, L2 are the leading and trailing parts of log_10(2)/64
-|		and L10 is the natural log of 10. Then
-|		10**X = 2**(M') * 2**(M) * 2**(j/64) * exp(r).
-|		Go to expr to compute that expression.
-|
-|	expr
-|	1. Fetch 2**(j/64) from table as Fact1 and Fact2.
-|
-|	2. Overwrite Fact1 and Fact2 by
-|		Fact1 := 2**(M) * Fact1
-|		Fact2 := 2**(M) * Fact2
-|		Thus Fact1 + Fact2 = 2**(M) * 2**(j/64).
-|
-|	3. Calculate P where 1 + P approximates exp(r):
-|		P = r + r*r*(A1+r*(A2+...+r*A5)).
-|
-|	4. Let AdjFact := 2**(M'). Return
-|		AdjFact * ( Fact1 + ((Fact1*P) + Fact2) ).
-|		Exit.
-|
-|	ExpBig
-|	1. Generate overflow by Huge * Huge if X > 0; otherwise, generate
-|		underflow by Tiny * Tiny.
-|
-|	ExpSm
-|	1. Return 1 + X.
-|
-
-|		Copyright (C) Motorola, Inc. 1990
-|			All Rights Reserved
-|
-|       For details on the license for this file, please see the
-|       file, README, in this same directory.
-
-|STWOTOX	idnt	2,1 | Motorola 040 Floating Point Software Package
-
-	|section	8
-
-#include "fpsp.h"
-
-BOUNDS1:	.long 0x3FB98000,0x400D80C0 | ... 2^(-70),16480
-BOUNDS2:	.long 0x3FB98000,0x400B9B07 | ... 2^(-70),16480 LOG2/LOG10
-
-L2TEN64:	.long 0x406A934F,0x0979A371 | ... 64LOG10/LOG2
-L10TWO1:	.long 0x3F734413,0x509F8000 | ... LOG2/64LOG10
-
-L10TWO2:	.long 0xBFCD0000,0xC0219DC1,0xDA994FD2,0x00000000
-
-LOG10:	.long 0x40000000,0x935D8DDD,0xAAA8AC17,0x00000000
-
-LOG2:	.long 0x3FFE0000,0xB17217F7,0xD1CF79AC,0x00000000
-
-EXPA5:	.long 0x3F56C16D,0x6F7BD0B2
-EXPA4:	.long 0x3F811112,0x302C712C
-EXPA3:	.long 0x3FA55555,0x55554CC1
-EXPA2:	.long 0x3FC55555,0x55554A54
-EXPA1:	.long 0x3FE00000,0x00000000,0x00000000,0x00000000
-
-HUGE:	.long 0x7FFE0000,0xFFFFFFFF,0xFFFFFFFF,0x00000000
-TINY:	.long 0x00010000,0xFFFFFFFF,0xFFFFFFFF,0x00000000
-
-EXPTBL:
-	.long  0x3FFF0000,0x80000000,0x00000000,0x3F738000
-	.long  0x3FFF0000,0x8164D1F3,0xBC030773,0x3FBEF7CA
-	.long  0x3FFF0000,0x82CD8698,0xAC2BA1D7,0x3FBDF8A9
-	.long  0x3FFF0000,0x843A28C3,0xACDE4046,0x3FBCD7C9
-	.long  0x3FFF0000,0x85AAC367,0xCC487B15,0xBFBDE8DA
-	.long  0x3FFF0000,0x871F6196,0x9E8D1010,0x3FBDE85C
-	.long  0x3FFF0000,0x88980E80,0x92DA8527,0x3FBEBBF1
-	.long  0x3FFF0000,0x8A14D575,0x496EFD9A,0x3FBB80CA
-	.long  0x3FFF0000,0x8B95C1E3,0xEA8BD6E7,0xBFBA8373
-	.long  0x3FFF0000,0x8D1ADF5B,0x7E5BA9E6,0xBFBE9670
-	.long  0x3FFF0000,0x8EA4398B,0x45CD53C0,0x3FBDB700
-	.long  0x3FFF0000,0x9031DC43,0x1466B1DC,0x3FBEEEB0
-	.long  0x3FFF0000,0x91C3D373,0xAB11C336,0x3FBBFD6D
-	.long  0x3FFF0000,0x935A2B2F,0x13E6E92C,0xBFBDB319
-	.long  0x3FFF0000,0x94F4EFA8,0xFEF70961,0x3FBDBA2B
-	.long  0x3FFF0000,0x96942D37,0x20185A00,0x3FBE91D5
-	.long  0x3FFF0000,0x9837F051,0x8DB8A96F,0x3FBE8D5A
-	.long  0x3FFF0000,0x99E04593,0x20B7FA65,0xBFBCDE7B
-	.long  0x3FFF0000,0x9B8D39B9,0xD54E5539,0xBFBEBAAF
-	.long  0x3FFF0000,0x9D3ED9A7,0x2CFFB751,0xBFBD86DA
-	.long  0x3FFF0000,0x9EF53260,0x91A111AE,0xBFBEBEDD
-	.long  0x3FFF0000,0xA0B0510F,0xB9714FC2,0x3FBCC96E
-	.long  0x3FFF0000,0xA2704303,0x0C496819,0xBFBEC90B
-	.long  0x3FFF0000,0xA43515AE,0x09E6809E,0x3FBBD1DB
-	.long  0x3FFF0000,0xA5FED6A9,0xB15138EA,0x3FBCE5EB
-	.long  0x3FFF0000,0xA7CD93B4,0xE965356A,0xBFBEC274
-	.long  0x3FFF0000,0xA9A15AB4,0xEA7C0EF8,0x3FBEA83C
-	.long  0x3FFF0000,0xAB7A39B5,0xA93ED337,0x3FBECB00
-	.long  0x3FFF0000,0xAD583EEA,0x42A14AC6,0x3FBE9301
-	.long  0x3FFF0000,0xAF3B78AD,0x690A4375,0xBFBD8367
-	.long  0x3FFF0000,0xB123F581,0xD2AC2590,0xBFBEF05F
-	.long  0x3FFF0000,0xB311C412,0xA9112489,0x3FBDFB3C
-	.long  0x3FFF0000,0xB504F333,0xF9DE6484,0x3FBEB2FB
-	.long  0x3FFF0000,0xB6FD91E3,0x28D17791,0x3FBAE2CB
-	.long  0x3FFF0000,0xB8FBAF47,0x62FB9EE9,0x3FBCDC3C
-	.long  0x3FFF0000,0xBAFF5AB2,0x133E45FB,0x3FBEE9AA
-	.long  0x3FFF0000,0xBD08A39F,0x580C36BF,0xBFBEAEFD
-	.long  0x3FFF0000,0xBF1799B6,0x7A731083,0xBFBCBF51
-	.long  0x3FFF0000,0xC12C4CCA,0x66709456,0x3FBEF88A
-	.long  0x3FFF0000,0xC346CCDA,0x24976407,0x3FBD83B2
-	.long  0x3FFF0000,0xC5672A11,0x5506DADD,0x3FBDF8AB
-	.long  0x3FFF0000,0xC78D74C8,0xABB9B15D,0xBFBDFB17
-	.long  0x3FFF0000,0xC9B9BD86,0x6E2F27A3,0xBFBEFE3C
-	.long  0x3FFF0000,0xCBEC14FE,0xF2727C5D,0xBFBBB6F8
-	.long  0x3FFF0000,0xCE248C15,0x1F8480E4,0xBFBCEE53
-	.long  0x3FFF0000,0xD06333DA,0xEF2B2595,0xBFBDA4AE
-	.long  0x3FFF0000,0xD2A81D91,0xF12AE45A,0x3FBC9124
-	.long  0x3FFF0000,0xD4F35AAB,0xCFEDFA1F,0x3FBEB243
-	.long  0x3FFF0000,0xD744FCCA,0xD69D6AF4,0x3FBDE69A
-	.long  0x3FFF0000,0xD99D15C2,0x78AFD7B6,0xBFB8BC61
-	.long  0x3FFF0000,0xDBFBB797,0xDAF23755,0x3FBDF610
-	.long  0x3FFF0000,0xDE60F482,0x5E0E9124,0xBFBD8BE1
-	.long  0x3FFF0000,0xE0CCDEEC,0x2A94E111,0x3FBACB12
-	.long  0x3FFF0000,0xE33F8972,0xBE8A5A51,0x3FBB9BFE
-	.long  0x3FFF0000,0xE5B906E7,0x7C8348A8,0x3FBCF2F4
-	.long  0x3FFF0000,0xE8396A50,0x3C4BDC68,0x3FBEF22F
-	.long  0x3FFF0000,0xEAC0C6E7,0xDD24392F,0xBFBDBF4A
-	.long  0x3FFF0000,0xED4F301E,0xD9942B84,0x3FBEC01A
-	.long  0x3FFF0000,0xEFE4B99B,0xDCDAF5CB,0x3FBE8CAC
-	.long  0x3FFF0000,0xF281773C,0x59FFB13A,0xBFBCBB3F
-	.long  0x3FFF0000,0xF5257D15,0x2486CC2C,0x3FBEF73A
-	.long  0x3FFF0000,0xF7D0DF73,0x0AD13BB9,0xBFB8B795
-	.long  0x3FFF0000,0xFA83B2DB,0x722A033A,0x3FBEF84B
-	.long  0x3FFF0000,0xFD3E0C0C,0xF486C175,0xBFBEF581
-
-	.set	N,L_SCR1
-
-	.set	X,FP_SCR1
-	.set	XDCARE,X+2
-	.set	XFRAC,X+4
-
-	.set	ADJFACT,FP_SCR2
-
-	.set	FACT1,FP_SCR3
-	.set	FACT1HI,FACT1+4
-	.set	FACT1LOW,FACT1+8
-
-	.set	FACT2,FP_SCR4
-	.set	FACT2HI,FACT2+4
-	.set	FACT2LOW,FACT2+8
-
-	| xref	t_unfl
-	|xref	t_ovfl
-	|xref	t_frcinx
-
-	.global	stwotoxd
-stwotoxd:
-|--ENTRY POINT FOR 2**(X) FOR DENORMALIZED ARGUMENT
-
-	fmovel		%d1,%fpcr		| ...set user's rounding mode/precision
-	fmoves		#0x3F800000,%fp0  | ...RETURN 1 + X
-	movel		(%a0),%d0
-	orl		#0x00800001,%d0
-	fadds		%d0,%fp0
-	bra		t_frcinx
-
-	.global	stwotox
-stwotox:
-|--ENTRY POINT FOR 2**(X), HERE X IS FINITE, NON-ZERO, AND NOT NAN'S
-	fmovemx	(%a0),%fp0-%fp0	| ...LOAD INPUT, do not set cc's
-
-	movel		(%a0),%d0
-	movew		4(%a0),%d0
-	fmovex		%fp0,X(%a6)
-	andil		#0x7FFFFFFF,%d0
-
-	cmpil		#0x3FB98000,%d0		| ...|X| >= 2**(-70)?
-	bges		TWOOK1
-	bra		EXPBORS
-
-TWOOK1:
-	cmpil		#0x400D80C0,%d0		| ...|X| > 16480?
-	bles		TWOMAIN
-	bra		EXPBORS
-
-
-TWOMAIN:
-|--USUAL CASE, 2^(-70) <= |X| <= 16480
-
-	fmovex		%fp0,%fp1
-	fmuls		#0x42800000,%fp1  | ...64 * X
-
-	fmovel		%fp1,N(%a6)		| ...N = ROUND-TO-INT(64 X)
-	movel		%d2,-(%sp)
-	lea		EXPTBL,%a1	| ...LOAD ADDRESS OF TABLE OF 2^(J/64)
-	fmovel		N(%a6),%fp1		| ...N --> FLOATING FMT
-	movel		N(%a6),%d0
-	movel		%d0,%d2
-	andil		#0x3F,%d0		| ...D0 IS J
-	asll		#4,%d0		| ...DISPLACEMENT FOR 2^(J/64)
-	addal		%d0,%a1		| ...ADDRESS FOR 2^(J/64)
-	asrl		#6,%d2		| ...d2 IS L, N = 64L + J
-	movel		%d2,%d0
-	asrl		#1,%d0		| ...D0 IS M
-	subl		%d0,%d2		| ...d2 IS M', N = 64(M+M') + J
-	addil		#0x3FFF,%d2
-	movew		%d2,ADJFACT(%a6)	| ...ADJFACT IS 2^(M')
-	movel		(%sp)+,%d2
-|--SUMMARY: a1 IS ADDRESS FOR THE LEADING PORTION OF 2^(J/64),
-|--D0 IS M WHERE N = 64(M+M') + J. NOTE THAT |M| <= 16140 BY DESIGN.
-|--ADJFACT = 2^(M').
-|--REGISTERS SAVED SO FAR ARE (IN ORDER) FPCR, D0, FP1, a1, AND FP2.
-
-	fmuls		#0x3C800000,%fp1  | ...(1/64)*N
-	movel		(%a1)+,FACT1(%a6)
-	movel		(%a1)+,FACT1HI(%a6)
-	movel		(%a1)+,FACT1LOW(%a6)
-	movew		(%a1)+,FACT2(%a6)
-	clrw		FACT2+2(%a6)
-
-	fsubx		%fp1,%fp0		| ...X - (1/64)*INT(64 X)
-
-	movew		(%a1)+,FACT2HI(%a6)
-	clrw		FACT2HI+2(%a6)
-	clrl		FACT2LOW(%a6)
-	addw		%d0,FACT1(%a6)
-
-	fmulx		LOG2,%fp0	| ...FP0 IS R
-	addw		%d0,FACT2(%a6)
-
-	bra		expr
-
-EXPBORS:
-|--FPCR, D0 SAVED
-	cmpil		#0x3FFF8000,%d0
-	bgts		EXPBIG
-
-EXPSM:
-|--|X| IS SMALL, RETURN 1 + X
-
-	fmovel		%d1,%FPCR		|restore users exceptions
-	fadds		#0x3F800000,%fp0  | ...RETURN 1 + X
-
-	bra		t_frcinx
-
-EXPBIG:
-|--|X| IS LARGE, GENERATE OVERFLOW IF X > 0; ELSE GENERATE UNDERFLOW
-|--REGISTERS SAVE SO FAR ARE FPCR AND  D0
-	movel		X(%a6),%d0
-	cmpil		#0,%d0
-	blts		EXPNEG
-
-	bclrb		#7,(%a0)		|t_ovfl expects positive value
-	bra		t_ovfl
-
-EXPNEG:
-	bclrb		#7,(%a0)		|t_unfl expects positive value
-	bra		t_unfl
-
-	.global	stentoxd
-stentoxd:
-|--ENTRY POINT FOR 10**(X) FOR DENORMALIZED ARGUMENT
-
-	fmovel		%d1,%fpcr		| ...set user's rounding mode/precision
-	fmoves		#0x3F800000,%fp0  | ...RETURN 1 + X
-	movel		(%a0),%d0
-	orl		#0x00800001,%d0
-	fadds		%d0,%fp0
-	bra		t_frcinx
-
-	.global	stentox
-stentox:
-|--ENTRY POINT FOR 10**(X), HERE X IS FINITE, NON-ZERO, AND NOT NAN'S
-	fmovemx	(%a0),%fp0-%fp0	| ...LOAD INPUT, do not set cc's
-
-	movel		(%a0),%d0
-	movew		4(%a0),%d0
-	fmovex		%fp0,X(%a6)
-	andil		#0x7FFFFFFF,%d0
-
-	cmpil		#0x3FB98000,%d0		| ...|X| >= 2**(-70)?
-	bges		TENOK1
-	bra		EXPBORS
-
-TENOK1:
-	cmpil		#0x400B9B07,%d0		| ...|X| <= 16480*log2/log10 ?
-	bles		TENMAIN
-	bra		EXPBORS
-
-TENMAIN:
-|--USUAL CASE, 2^(-70) <= |X| <= 16480 LOG 2 / LOG 10
-
-	fmovex		%fp0,%fp1
-	fmuld		L2TEN64,%fp1	| ...X*64*LOG10/LOG2
-
-	fmovel		%fp1,N(%a6)		| ...N=INT(X*64*LOG10/LOG2)
-	movel		%d2,-(%sp)
-	lea		EXPTBL,%a1	| ...LOAD ADDRESS OF TABLE OF 2^(J/64)
-	fmovel		N(%a6),%fp1		| ...N --> FLOATING FMT
-	movel		N(%a6),%d0
-	movel		%d0,%d2
-	andil		#0x3F,%d0		| ...D0 IS J
-	asll		#4,%d0		| ...DISPLACEMENT FOR 2^(J/64)
-	addal		%d0,%a1		| ...ADDRESS FOR 2^(J/64)
-	asrl		#6,%d2		| ...d2 IS L, N = 64L + J
-	movel		%d2,%d0
-	asrl		#1,%d0		| ...D0 IS M
-	subl		%d0,%d2		| ...d2 IS M', N = 64(M+M') + J
-	addil		#0x3FFF,%d2
-	movew		%d2,ADJFACT(%a6)	| ...ADJFACT IS 2^(M')
-	movel		(%sp)+,%d2
-
-|--SUMMARY: a1 IS ADDRESS FOR THE LEADING PORTION OF 2^(J/64),
-|--D0 IS M WHERE N = 64(M+M') + J. NOTE THAT |M| <= 16140 BY DESIGN.
-|--ADJFACT = 2^(M').
-|--REGISTERS SAVED SO FAR ARE (IN ORDER) FPCR, D0, FP1, a1, AND FP2.
-
-	fmovex		%fp1,%fp2
-
-	fmuld		L10TWO1,%fp1	| ...N*(LOG2/64LOG10)_LEAD
-	movel		(%a1)+,FACT1(%a6)
-
-	fmulx		L10TWO2,%fp2	| ...N*(LOG2/64LOG10)_TRAIL
-
-	movel		(%a1)+,FACT1HI(%a6)
-	movel		(%a1)+,FACT1LOW(%a6)
-	fsubx		%fp1,%fp0		| ...X - N L_LEAD
-	movew		(%a1)+,FACT2(%a6)
-
-	fsubx		%fp2,%fp0		| ...X - N L_TRAIL
-
-	clrw		FACT2+2(%a6)
-	movew		(%a1)+,FACT2HI(%a6)
-	clrw		FACT2HI+2(%a6)
-	clrl		FACT2LOW(%a6)
-
-	fmulx		LOG10,%fp0	| ...FP0 IS R
-
-	addw		%d0,FACT1(%a6)
-	addw		%d0,FACT2(%a6)
-
-expr:
-|--FPCR, FP2, FP3 ARE SAVED IN ORDER AS SHOWN.
-|--ADJFACT CONTAINS 2**(M'), FACT1 + FACT2 = 2**(M) * 2**(J/64).
-|--FP0 IS R. THE FOLLOWING CODE COMPUTES
-|--	2**(M'+M) * 2**(J/64) * EXP(R)
-
-	fmovex		%fp0,%fp1
-	fmulx		%fp1,%fp1		| ...FP1 IS S = R*R
-
-	fmoved		EXPA5,%fp2	| ...FP2 IS A5
-	fmoved		EXPA4,%fp3	| ...FP3 IS A4
-
-	fmulx		%fp1,%fp2		| ...FP2 IS S*A5
-	fmulx		%fp1,%fp3		| ...FP3 IS S*A4
-
-	faddd		EXPA3,%fp2	| ...FP2 IS A3+S*A5
-	faddd		EXPA2,%fp3	| ...FP3 IS A2+S*A4
-
-	fmulx		%fp1,%fp2		| ...FP2 IS S*(A3+S*A5)
-	fmulx		%fp1,%fp3		| ...FP3 IS S*(A2+S*A4)
-
-	faddd		EXPA1,%fp2	| ...FP2 IS A1+S*(A3+S*A5)
-	fmulx		%fp0,%fp3		| ...FP3 IS R*S*(A2+S*A4)
-
-	fmulx		%fp1,%fp2		| ...FP2 IS S*(A1+S*(A3+S*A5))
-	faddx		%fp3,%fp0		| ...FP0 IS R+R*S*(A2+S*A4)
-
-	faddx		%fp2,%fp0		| ...FP0 IS EXP(R) - 1
-
-
-|--FINAL RECONSTRUCTION PROCESS
-|--EXP(X) = 2^M*2^(J/64) + 2^M*2^(J/64)*(EXP(R)-1)  -  (1 OR 0)
-
-	fmulx		FACT1(%a6),%fp0
-	faddx		FACT2(%a6),%fp0
-	faddx		FACT1(%a6),%fp0
-
-	fmovel		%d1,%FPCR		|restore users exceptions
-	clrw		ADJFACT+2(%a6)
-	movel		#0x80000000,ADJFACT+4(%a6)
-	clrl		ADJFACT+8(%a6)
-	fmulx		ADJFACT(%a6),%fp0	| ...FINAL ADJUSTMENT
-
-	bra		t_frcinx
-
-	|end
diff --git a/ANDROID_3.4.5/arch/m68k/fpsp040/tbldo.S b/ANDROID_3.4.5/arch/m68k/fpsp040/tbldo.S
deleted file mode 100644
index fd5c37a5..00000000
--- a/ANDROID_3.4.5/arch/m68k/fpsp040/tbldo.S
+++ /dev/null
@@ -1,553 +0,0 @@
-|
-|	tbldo.sa 3.1 12/10/90
-|
-| Modified:
-|	8/16/90	chinds	The table was constructed to use only one level
-|			of indirection in do_func for monadic
-|			functions.  Dyadic functions require two
-|			levels, and the tables are still contained
-|			in do_func.  The table is arranged for
-|			index with a 10-bit index, with the first
-|			7 bits the opcode, and the remaining 3
-|			the stag.  For dyadic functions, all
-|			valid addresses are to the generic entry
-|			point.
-|
-
-|		Copyright (C) Motorola, Inc. 1990
-|			All Rights Reserved
-|
-|       For details on the license for this file, please see the
-|       file, README, in this same directory.
-
-|TBLDO	idnt    2,1 | Motorola 040 Floating Point Software Package
-
-	|section	8
-
-	|xref	ld_pinf,ld_pone,ld_ppi2
-	|xref	t_dz2,t_operr
-	|xref	serror,sone,szero,sinf,snzrinx
-	|xref	sopr_inf,spi_2,src_nan,szr_inf
-
-	|xref	smovcr
-	|xref	pmod,prem,pscale
-	|xref	satanh,satanhd
-	|xref	sacos,sacosd,sasin,sasind,satan,satand
-	|xref	setox,setoxd,setoxm1,setoxm1d,setoxm1i
-	|xref	sgetexp,sgetexpd,sgetman,sgetmand
-	|xref	sint,sintd,sintrz
-	|xref	ssincos,ssincosd,ssincosi,ssincosnan,ssincosz
-	|xref	scos,scosd,ssin,ssind,stan,stand
-	|xref	scosh,scoshd,ssinh,ssinhd,stanh,stanhd
-	|xref	sslog10,sslog2,sslogn,sslognp1
-	|xref	sslog10d,sslog2d,sslognd,slognp1d
-	|xref	stentox,stentoxd,stwotox,stwotoxd
-
-|	instruction		;opcode-stag Notes
-	.global	tblpre
-tblpre:
-	.long	smovcr		|$00-0 fmovecr all
-	.long	smovcr		|$00-1 fmovecr all
-	.long	smovcr		|$00-2 fmovecr all
-	.long	smovcr		|$00-3 fmovecr all
-	.long	smovcr		|$00-4 fmovecr all
-	.long	smovcr		|$00-5 fmovecr all
-	.long	smovcr		|$00-6 fmovecr all
-	.long	smovcr		|$00-7 fmovecr all
-
-	.long	sint		|$01-0 fint norm
-	.long	szero		|$01-1 fint zero
-	.long	sinf		|$01-2 fint inf
-	.long	src_nan		|$01-3 fint nan
-	.long	sintd		|$01-4 fint denorm inx
-	.long	serror		|$01-5 fint ERROR
-	.long	serror		|$01-6 fint ERROR
-	.long	serror		|$01-7 fint ERROR
-
-	.long	ssinh		|$02-0 fsinh norm
-	.long	szero		|$02-1 fsinh zero
-	.long	sinf		|$02-2 fsinh inf
-	.long	src_nan		|$02-3 fsinh nan
-	.long	ssinhd		|$02-4 fsinh denorm
-	.long	serror		|$02-5 fsinh ERROR
-	.long	serror		|$02-6 fsinh ERROR
-	.long	serror		|$02-7 fsinh ERROR
-
-	.long	sintrz		|$03-0 fintrz norm
-	.long	szero		|$03-1 fintrz zero
-	.long	sinf		|$03-2 fintrz inf
-	.long	src_nan		|$03-3 fintrz nan
-	.long	snzrinx		|$03-4 fintrz denorm inx
-	.long	serror		|$03-5 fintrz ERROR
-	.long	serror		|$03-6 fintrz ERROR
-	.long	serror		|$03-7 fintrz ERROR
-
-	.long	serror		|$04-0 ERROR - illegal extension
-	.long	serror		|$04-1 ERROR - illegal extension
-	.long	serror		|$04-2 ERROR - illegal extension
-	.long	serror		|$04-3 ERROR - illegal extension
-	.long	serror		|$04-4 ERROR - illegal extension
-	.long	serror		|$04-5 ERROR - illegal extension
-	.long	serror		|$04-6 ERROR - illegal extension
-	.long	serror		|$04-7 ERROR - illegal extension
-
-	.long	serror		|$05-0 ERROR - illegal extension
-	.long	serror		|$05-1 ERROR - illegal extension
-	.long	serror		|$05-2 ERROR - illegal extension
-	.long	serror		|$05-3 ERROR - illegal extension
-	.long	serror		|$05-4 ERROR - illegal extension
-	.long	serror		|$05-5 ERROR - illegal extension
-	.long	serror		|$05-6 ERROR - illegal extension
-	.long	serror		|$05-7 ERROR - illegal extension
-
-	.long	sslognp1	|$06-0 flognp1 norm
-	.long	szero		|$06-1 flognp1 zero
-	.long	sopr_inf	|$06-2 flognp1 inf
-	.long	src_nan		|$06-3 flognp1 nan
-	.long	slognp1d	|$06-4 flognp1 denorm
-	.long	serror		|$06-5 flognp1 ERROR
-	.long	serror		|$06-6 flognp1 ERROR
-	.long	serror		|$06-7 flognp1 ERROR
-
-	.long	serror		|$07-0 ERROR - illegal extension
-	.long	serror		|$07-1 ERROR - illegal extension
-	.long	serror		|$07-2 ERROR - illegal extension
-	.long	serror		|$07-3 ERROR - illegal extension
-	.long	serror		|$07-4 ERROR - illegal extension
-	.long	serror		|$07-5 ERROR - illegal extension
-	.long	serror		|$07-6 ERROR - illegal extension
-	.long	serror		|$07-7 ERROR - illegal extension
-
-	.long	setoxm1		|$08-0 fetoxm1 norm
-	.long	szero		|$08-1 fetoxm1 zero
-	.long	setoxm1i	|$08-2 fetoxm1 inf
-	.long	src_nan		|$08-3 fetoxm1 nan
-	.long	setoxm1d	|$08-4 fetoxm1 denorm
-	.long	serror		|$08-5 fetoxm1 ERROR
-	.long	serror		|$08-6 fetoxm1 ERROR
-	.long	serror		|$08-7 fetoxm1 ERROR
-
-	.long	stanh		|$09-0 ftanh norm
-	.long	szero		|$09-1 ftanh zero
-	.long	sone		|$09-2 ftanh inf
-	.long	src_nan		|$09-3 ftanh nan
-	.long	stanhd		|$09-4 ftanh denorm
-	.long	serror		|$09-5 ftanh ERROR
-	.long	serror		|$09-6 ftanh ERROR
-	.long	serror		|$09-7 ftanh ERROR
-
-	.long	satan		|$0a-0 fatan norm
-	.long	szero		|$0a-1 fatan zero
-	.long	spi_2		|$0a-2 fatan inf
-	.long	src_nan		|$0a-3 fatan nan
-	.long	satand		|$0a-4 fatan denorm
-	.long	serror		|$0a-5 fatan ERROR
-	.long	serror		|$0a-6 fatan ERROR
-	.long	serror		|$0a-7 fatan ERROR
-
-	.long	serror		|$0b-0 ERROR - illegal extension
-	.long	serror		|$0b-1 ERROR - illegal extension
-	.long	serror		|$0b-2 ERROR - illegal extension
-	.long	serror		|$0b-3 ERROR - illegal extension
-	.long	serror		|$0b-4 ERROR - illegal extension
-	.long	serror		|$0b-5 ERROR - illegal extension
-	.long	serror		|$0b-6 ERROR - illegal extension
-	.long	serror		|$0b-7 ERROR - illegal extension
-
-	.long	sasin		|$0c-0 fasin norm
-	.long	szero		|$0c-1 fasin zero
-	.long	t_operr		|$0c-2 fasin inf
-	.long	src_nan		|$0c-3 fasin nan
-	.long	sasind		|$0c-4 fasin denorm
-	.long	serror		|$0c-5 fasin ERROR
-	.long	serror		|$0c-6 fasin ERROR
-	.long	serror		|$0c-7 fasin ERROR
-
-	.long	satanh		|$0d-0 fatanh norm
-	.long	szero		|$0d-1 fatanh zero
-	.long	t_operr		|$0d-2 fatanh inf
-	.long	src_nan		|$0d-3 fatanh nan
-	.long	satanhd		|$0d-4 fatanh denorm
-	.long	serror		|$0d-5 fatanh ERROR
-	.long	serror		|$0d-6 fatanh ERROR
-	.long	serror		|$0d-7 fatanh ERROR
-
-	.long	ssin		|$0e-0 fsin norm
-	.long	szero		|$0e-1 fsin zero
-	.long	t_operr		|$0e-2 fsin inf
-	.long	src_nan		|$0e-3 fsin nan
-	.long	ssind		|$0e-4 fsin denorm
-	.long	serror		|$0e-5 fsin ERROR
-	.long	serror		|$0e-6 fsin ERROR
-	.long	serror		|$0e-7 fsin ERROR
-
-	.long	stan		|$0f-0 ftan norm
-	.long	szero		|$0f-1 ftan zero
-	.long	t_operr		|$0f-2 ftan inf
-	.long	src_nan		|$0f-3 ftan nan
-	.long	stand		|$0f-4 ftan denorm
-	.long	serror		|$0f-5 ftan ERROR
-	.long	serror		|$0f-6 ftan ERROR
-	.long	serror		|$0f-7 ftan ERROR
-
-	.long	setox		|$10-0 fetox norm
-	.long	ld_pone		|$10-1 fetox zero
-	.long	szr_inf		|$10-2 fetox inf
-	.long	src_nan		|$10-3 fetox nan
-	.long	setoxd		|$10-4 fetox denorm
-	.long	serror		|$10-5 fetox ERROR
-	.long	serror		|$10-6 fetox ERROR
-	.long	serror		|$10-7 fetox ERROR
-
-	.long	stwotox		|$11-0 ftwotox norm
-	.long	ld_pone		|$11-1 ftwotox zero
-	.long	szr_inf		|$11-2 ftwotox inf
-	.long	src_nan		|$11-3 ftwotox nan
-	.long	stwotoxd	|$11-4 ftwotox denorm
-	.long	serror		|$11-5 ftwotox ERROR
-	.long	serror		|$11-6 ftwotox ERROR
-	.long	serror		|$11-7 ftwotox ERROR
-
-	.long	stentox		|$12-0 ftentox norm
-	.long	ld_pone		|$12-1 ftentox zero
-	.long	szr_inf		|$12-2 ftentox inf
-	.long	src_nan		|$12-3 ftentox nan
-	.long	stentoxd	|$12-4 ftentox denorm
-	.long	serror		|$12-5 ftentox ERROR
-	.long	serror		|$12-6 ftentox ERROR
-	.long	serror		|$12-7 ftentox ERROR
-
-	.long	serror		|$13-0 ERROR - illegal extension
-	.long	serror		|$13-1 ERROR - illegal extension
-	.long	serror		|$13-2 ERROR - illegal extension
-	.long	serror		|$13-3 ERROR - illegal extension
-	.long	serror		|$13-4 ERROR - illegal extension
-	.long	serror		|$13-5 ERROR - illegal extension
-	.long	serror		|$13-6 ERROR - illegal extension
-	.long	serror		|$13-7 ERROR - illegal extension
-
-	.long	sslogn		|$14-0 flogn norm
-	.long	t_dz2		|$14-1 flogn zero
-	.long	sopr_inf	|$14-2 flogn inf
-	.long	src_nan		|$14-3 flogn nan
-	.long	sslognd		|$14-4 flogn denorm
-	.long	serror		|$14-5 flogn ERROR
-	.long	serror		|$14-6 flogn ERROR
-	.long	serror		|$14-7 flogn ERROR
-
-	.long	sslog10		|$15-0 flog10 norm
-	.long	t_dz2		|$15-1 flog10 zero
-	.long	sopr_inf	|$15-2 flog10 inf
-	.long	src_nan		|$15-3 flog10 nan
-	.long	sslog10d	|$15-4 flog10 denorm
-	.long	serror		|$15-5 flog10 ERROR
-	.long	serror		|$15-6 flog10 ERROR
-	.long	serror		|$15-7 flog10 ERROR
-
-	.long	sslog2		|$16-0 flog2 norm
-	.long	t_dz2		|$16-1 flog2 zero
-	.long	sopr_inf	|$16-2 flog2 inf
-	.long	src_nan		|$16-3 flog2 nan
-	.long	sslog2d		|$16-4 flog2 denorm
-	.long	serror		|$16-5 flog2 ERROR
-	.long	serror		|$16-6 flog2 ERROR
-	.long	serror		|$16-7 flog2 ERROR
-
-	.long	serror		|$17-0 ERROR - illegal extension
-	.long	serror		|$17-1 ERROR - illegal extension
-	.long	serror		|$17-2 ERROR - illegal extension
-	.long	serror		|$17-3 ERROR - illegal extension
-	.long	serror		|$17-4 ERROR - illegal extension
-	.long	serror		|$17-5 ERROR - illegal extension
-	.long	serror		|$17-6 ERROR - illegal extension
-	.long	serror		|$17-7 ERROR - illegal extension
-
-	.long	serror		|$18-0 ERROR - illegal extension
-	.long	serror		|$18-1 ERROR - illegal extension
-	.long	serror		|$18-2 ERROR - illegal extension
-	.long	serror		|$18-3 ERROR - illegal extension
-	.long	serror		|$18-4 ERROR - illegal extension
-	.long	serror		|$18-5 ERROR - illegal extension
-	.long	serror		|$18-6 ERROR - illegal extension
-	.long	serror		|$18-7 ERROR - illegal extension
-
-	.long	scosh		|$19-0 fcosh norm
-	.long	ld_pone		|$19-1 fcosh zero
-	.long	ld_pinf		|$19-2 fcosh inf
-	.long	src_nan		|$19-3 fcosh nan
-	.long	scoshd		|$19-4 fcosh denorm
-	.long	serror		|$19-5 fcosh ERROR
-	.long	serror		|$19-6 fcosh ERROR
-	.long	serror		|$19-7 fcosh ERROR
-
-	.long	serror		|$1a-0 ERROR - illegal extension
-	.long	serror		|$1a-1 ERROR - illegal extension
-	.long	serror		|$1a-2 ERROR - illegal extension
-	.long	serror		|$1a-3 ERROR - illegal extension
-	.long	serror		|$1a-4 ERROR - illegal extension
-	.long	serror		|$1a-5 ERROR - illegal extension
-	.long	serror		|$1a-6 ERROR - illegal extension
-	.long	serror		|$1a-7 ERROR - illegal extension
-
-	.long	serror		|$1b-0 ERROR - illegal extension
-	.long	serror		|$1b-1 ERROR - illegal extension
-	.long	serror		|$1b-2 ERROR - illegal extension
-	.long	serror		|$1b-3 ERROR - illegal extension
-	.long	serror		|$1b-4 ERROR - illegal extension
-	.long	serror		|$1b-5 ERROR - illegal extension
-	.long	serror		|$1b-6 ERROR - illegal extension
-	.long	serror		|$1b-7 ERROR - illegal extension
-
-	.long	sacos		|$1c-0 facos norm
-	.long	ld_ppi2		|$1c-1 facos zero
-	.long	t_operr		|$1c-2 facos inf
-	.long	src_nan		|$1c-3 facos nan
-	.long	sacosd		|$1c-4 facos denorm
-	.long	serror		|$1c-5 facos ERROR
-	.long	serror		|$1c-6 facos ERROR
-	.long	serror		|$1c-7 facos ERROR
-
-	.long	scos		|$1d-0 fcos norm
-	.long	ld_pone		|$1d-1 fcos zero
-	.long	t_operr		|$1d-2 fcos inf
-	.long	src_nan		|$1d-3 fcos nan
-	.long	scosd		|$1d-4 fcos denorm
-	.long	serror		|$1d-5 fcos ERROR
-	.long	serror		|$1d-6 fcos ERROR
-	.long	serror		|$1d-7 fcos ERROR
-
-	.long	sgetexp		|$1e-0 fgetexp norm
-	.long	szero		|$1e-1 fgetexp zero
-	.long	t_operr		|$1e-2 fgetexp inf
-	.long	src_nan		|$1e-3 fgetexp nan
-	.long	sgetexpd	|$1e-4 fgetexp denorm
-	.long	serror		|$1e-5 fgetexp ERROR
-	.long	serror		|$1e-6 fgetexp ERROR
-	.long	serror		|$1e-7 fgetexp ERROR
-
-	.long	sgetman		|$1f-0 fgetman norm
-	.long	szero		|$1f-1 fgetman zero
-	.long	t_operr		|$1f-2 fgetman inf
-	.long	src_nan		|$1f-3 fgetman nan
-	.long	sgetmand	|$1f-4 fgetman denorm
-	.long	serror		|$1f-5 fgetman ERROR
-	.long	serror		|$1f-6 fgetman ERROR
-	.long	serror		|$1f-7 fgetman ERROR
-
-	.long	serror		|$20-0 ERROR - illegal extension
-	.long	serror		|$20-1 ERROR - illegal extension
-	.long	serror		|$20-2 ERROR - illegal extension
-	.long	serror		|$20-3 ERROR - illegal extension
-	.long	serror		|$20-4 ERROR - illegal extension
-	.long	serror		|$20-5 ERROR - illegal extension
-	.long	serror		|$20-6 ERROR - illegal extension
-	.long	serror		|$20-7 ERROR - illegal extension
-
-	.long	pmod		|$21-0 fmod all
-	.long	pmod		|$21-1 fmod all
-	.long	pmod		|$21-2 fmod all
-	.long	pmod		|$21-3 fmod all
-	.long	pmod		|$21-4 fmod all
-	.long	serror		|$21-5 fmod ERROR
-	.long	serror		|$21-6 fmod ERROR
-	.long	serror		|$21-7 fmod ERROR
-
-	.long	serror		|$22-0 ERROR - illegal extension
-	.long	serror		|$22-1 ERROR - illegal extension
-	.long	serror		|$22-2 ERROR - illegal extension
-	.long	serror		|$22-3 ERROR - illegal extension
-	.long	serror		|$22-4 ERROR - illegal extension
-	.long	serror		|$22-5 ERROR - illegal extension
-	.long	serror		|$22-6 ERROR - illegal extension
-	.long	serror		|$22-7 ERROR - illegal extension
-
-	.long	serror		|$23-0 ERROR - illegal extension
-	.long	serror		|$23-1 ERROR - illegal extension
-	.long	serror		|$23-2 ERROR - illegal extension
-	.long	serror		|$23-3 ERROR - illegal extension
-	.long	serror		|$23-4 ERROR - illegal extension
-	.long	serror		|$23-5 ERROR - illegal extension
-	.long	serror		|$23-6 ERROR - illegal extension
-	.long	serror		|$23-7 ERROR - illegal extension
-
-	.long	serror		|$24-0 ERROR - illegal extension
-	.long	serror		|$24-1 ERROR - illegal extension
-	.long	serror		|$24-2 ERROR - illegal extension
-	.long	serror		|$24-3 ERROR - illegal extension
-	.long	serror		|$24-4 ERROR - illegal extension
-	.long	serror		|$24-5 ERROR - illegal extension
-	.long	serror		|$24-6 ERROR - illegal extension
-	.long	serror		|$24-7 ERROR - illegal extension
-
-	.long	prem		|$25-0 frem all
-	.long	prem		|$25-1 frem all
-	.long	prem		|$25-2 frem all
-	.long	prem		|$25-3 frem all
-	.long	prem		|$25-4 frem all
-	.long	serror		|$25-5 frem ERROR
-	.long	serror		|$25-6 frem ERROR
-	.long	serror		|$25-7 frem ERROR
-
-	.long	pscale		|$26-0 fscale all
-	.long	pscale		|$26-1 fscale all
-	.long	pscale		|$26-2 fscale all
-	.long	pscale		|$26-3 fscale all
-	.long	pscale		|$26-4 fscale all
-	.long	serror		|$26-5 fscale ERROR
-	.long	serror		|$26-6 fscale ERROR
-	.long	serror		|$26-7 fscale ERROR
-
-	.long	serror		|$27-0 ERROR - illegal extension
-	.long	serror		|$27-1 ERROR - illegal extension
-	.long	serror		|$27-2 ERROR - illegal extension
-	.long	serror		|$27-3 ERROR - illegal extension
-	.long	serror		|$27-4 ERROR - illegal extension
-	.long	serror		|$27-5 ERROR - illegal extension
-	.long	serror		|$27-6 ERROR - illegal extension
-	.long	serror		|$27-7 ERROR - illegal extension
-
-	.long	serror		|$28-0 ERROR - illegal extension
-	.long	serror		|$28-1 ERROR - illegal extension
-	.long	serror		|$28-2 ERROR - illegal extension
-	.long	serror		|$28-3 ERROR - illegal extension
-	.long	serror		|$28-4 ERROR - illegal extension
-	.long	serror		|$28-5 ERROR - illegal extension
-	.long	serror		|$28-6 ERROR - illegal extension
-	.long	serror		|$28-7 ERROR - illegal extension
-
-	.long	serror		|$29-0 ERROR - illegal extension
-	.long	serror		|$29-1 ERROR - illegal extension
-	.long	serror		|$29-2 ERROR - illegal extension
-	.long	serror		|$29-3 ERROR - illegal extension
-	.long	serror		|$29-4 ERROR - illegal extension
-	.long	serror		|$29-5 ERROR - illegal extension
-	.long	serror		|$29-6 ERROR - illegal extension
-	.long	serror		|$29-7 ERROR - illegal extension
-
-	.long	serror		|$2a-0 ERROR - illegal extension
-	.long	serror		|$2a-1 ERROR - illegal extension
-	.long	serror		|$2a-2 ERROR - illegal extension
-	.long	serror		|$2a-3 ERROR - illegal extension
-	.long	serror		|$2a-4 ERROR - illegal extension
-	.long	serror		|$2a-5 ERROR - illegal extension
-	.long	serror		|$2a-6 ERROR - illegal extension
-	.long	serror		|$2a-7 ERROR - illegal extension
-
-	.long	serror		|$2b-0 ERROR - illegal extension
-	.long	serror		|$2b-1 ERROR - illegal extension
-	.long	serror		|$2b-2 ERROR - illegal extension
-	.long	serror		|$2b-3 ERROR - illegal extension
-	.long	serror		|$2b-4 ERROR - illegal extension
-	.long	serror		|$2b-5 ERROR - illegal extension
-	.long	serror		|$2b-6 ERROR - illegal extension
-	.long	serror		|$2b-7 ERROR - illegal extension
-
-	.long	serror		|$2c-0 ERROR - illegal extension
-	.long	serror		|$2c-1 ERROR - illegal extension
-	.long	serror		|$2c-2 ERROR - illegal extension
-	.long	serror		|$2c-3 ERROR - illegal extension
-	.long	serror		|$2c-4 ERROR - illegal extension
-	.long	serror		|$2c-5 ERROR - illegal extension
-	.long	serror		|$2c-6 ERROR - illegal extension
-	.long	serror		|$2c-7 ERROR - illegal extension
-
-	.long	serror		|$2d-0 ERROR - illegal extension
-	.long	serror		|$2d-1 ERROR - illegal extension
-	.long	serror		|$2d-2 ERROR - illegal extension
-	.long	serror		|$2d-3 ERROR - illegal extension
-	.long	serror		|$2d-4 ERROR - illegal extension
-	.long	serror		|$2d-5 ERROR - illegal extension
-	.long	serror		|$2d-6 ERROR - illegal extension
-	.long	serror		|$2d-7 ERROR - illegal extension
-
-	.long	serror		|$2e-0 ERROR - illegal extension
-	.long	serror		|$2e-1 ERROR - illegal extension
-	.long	serror		|$2e-2 ERROR - illegal extension
-	.long	serror		|$2e-3 ERROR - illegal extension
-	.long	serror		|$2e-4 ERROR - illegal extension
-	.long	serror		|$2e-5 ERROR - illegal extension
-	.long	serror		|$2e-6 ERROR - illegal extension
-	.long	serror		|$2e-7 ERROR - illegal extension
-
-	.long	serror		|$2f-0 ERROR - illegal extension
-	.long	serror		|$2f-1 ERROR - illegal extension
-	.long	serror		|$2f-2 ERROR - illegal extension
-	.long	serror		|$2f-3 ERROR - illegal extension
-	.long	serror		|$2f-4 ERROR - illegal extension
-	.long	serror		|$2f-5 ERROR - illegal extension
-	.long	serror		|$2f-6 ERROR - illegal extension
-	.long	serror		|$2f-7 ERROR - illegal extension
-
-	.long	ssincos		|$30-0 fsincos norm
-	.long	ssincosz	|$30-1 fsincos zero
-	.long	ssincosi	|$30-2 fsincos inf
-	.long	ssincosnan	|$30-3 fsincos nan
-	.long	ssincosd	|$30-4 fsincos denorm
-	.long	serror		|$30-5 fsincos ERROR
-	.long	serror		|$30-6 fsincos ERROR
-	.long	serror		|$30-7 fsincos ERROR
-
-	.long	ssincos		|$31-0 fsincos norm
-	.long	ssincosz	|$31-1 fsincos zero
-	.long	ssincosi	|$31-2 fsincos inf
-	.long	ssincosnan	|$31-3 fsincos nan
-	.long	ssincosd	|$31-4 fsincos denorm
-	.long	serror		|$31-5 fsincos ERROR
-	.long	serror		|$31-6 fsincos ERROR
-	.long	serror		|$31-7 fsincos ERROR
-
-	.long	ssincos		|$32-0 fsincos norm
-	.long	ssincosz	|$32-1 fsincos zero
-	.long	ssincosi	|$32-2 fsincos inf
-	.long	ssincosnan	|$32-3 fsincos nan
-	.long	ssincosd	|$32-4 fsincos denorm
-	.long	serror		|$32-5 fsincos ERROR
-	.long	serror		|$32-6 fsincos ERROR
-	.long	serror		|$32-7 fsincos ERROR
-
-	.long	ssincos		|$33-0 fsincos norm
-	.long	ssincosz	|$33-1 fsincos zero
-	.long	ssincosi	|$33-2 fsincos inf
-	.long	ssincosnan	|$33-3 fsincos nan
-	.long	ssincosd	|$33-4 fsincos denorm
-	.long	serror		|$33-5 fsincos ERROR
-	.long	serror		|$33-6 fsincos ERROR
-	.long	serror		|$33-7 fsincos ERROR
-
-	.long	ssincos		|$34-0 fsincos norm
-	.long	ssincosz	|$34-1 fsincos zero
-	.long	ssincosi	|$34-2 fsincos inf
-	.long	ssincosnan	|$34-3 fsincos nan
-	.long	ssincosd	|$34-4 fsincos denorm
-	.long	serror		|$34-5 fsincos ERROR
-	.long	serror		|$34-6 fsincos ERROR
-	.long	serror		|$34-7 fsincos ERROR
-
-	.long	ssincos		|$35-0 fsincos norm
-	.long	ssincosz	|$35-1 fsincos zero
-	.long	ssincosi	|$35-2 fsincos inf
-	.long	ssincosnan	|$35-3 fsincos nan
-	.long	ssincosd	|$35-4 fsincos denorm
-	.long	serror		|$35-5 fsincos ERROR
-	.long	serror		|$35-6 fsincos ERROR
-	.long	serror		|$35-7 fsincos ERROR
-
-	.long	ssincos		|$36-0 fsincos norm
-	.long	ssincosz	|$36-1 fsincos zero
-	.long	ssincosi	|$36-2 fsincos inf
-	.long	ssincosnan	|$36-3 fsincos nan
-	.long	ssincosd	|$36-4 fsincos denorm
-	.long	serror		|$36-5 fsincos ERROR
-	.long	serror		|$36-6 fsincos ERROR
-	.long	serror		|$36-7 fsincos ERROR
-
-	.long	ssincos		|$37-0 fsincos norm
-	.long	ssincosz	|$37-1 fsincos zero
-	.long	ssincosi	|$37-2 fsincos inf
-	.long	ssincosnan	|$37-3 fsincos nan
-	.long	ssincosd	|$37-4 fsincos denorm
-	.long	serror		|$37-5 fsincos ERROR
-	.long	serror		|$37-6 fsincos ERROR
-	.long	serror		|$37-7 fsincos ERROR
-
-	|end
diff --git a/ANDROID_3.4.5/arch/m68k/fpsp040/util.S b/ANDROID_3.4.5/arch/m68k/fpsp040/util.S
deleted file mode 100644
index 65b26fa8..00000000
--- a/ANDROID_3.4.5/arch/m68k/fpsp040/util.S
+++ /dev/null
@@ -1,747 +0,0 @@
-|
-|	util.sa 3.7 7/29/91
-|
-|	This file contains routines used by other programs.
-|
-|	ovf_res: used by overflow to force the correct
-|		 result. ovf_r_k, ovf_r_x2, ovf_r_x3 are
-|		 derivatives of this routine.
-|	get_fline: get user's opcode word
-|	g_dfmtou: returns the destination format.
-|	g_opcls: returns the opclass of the float instruction.
-|	g_rndpr: returns the rounding precision.
-|	reg_dest: write byte, word, or long data to Dn
-|
-|
-|		Copyright (C) Motorola, Inc. 1990
-|			All Rights Reserved
-|
-|       For details on the license for this file, please see the
-|       file, README, in this same directory.
-
-|UTIL	idnt    2,1 | Motorola 040 Floating Point Software Package
-
-	|section	8
-
-#include "fpsp.h"
-
-	|xref	mem_read
-
-	.global	g_dfmtou
-	.global	g_opcls
-	.global	g_rndpr
-	.global	get_fline
-	.global	reg_dest
-
-|
-| Final result table for ovf_res. Note that the negative counterparts
-| are unnecessary as ovf_res always returns the sign separately from
-| the exponent.
-|					;+inf
-EXT_PINF:	.long	0x7fff0000,0x00000000,0x00000000,0x00000000
-|					;largest +ext
-EXT_PLRG:	.long	0x7ffe0000,0xffffffff,0xffffffff,0x00000000
-|					;largest magnitude +sgl in ext
-SGL_PLRG:	.long	0x407e0000,0xffffff00,0x00000000,0x00000000
-|					;largest magnitude +dbl in ext
-DBL_PLRG:	.long	0x43fe0000,0xffffffff,0xfffff800,0x00000000
-|					;largest -ext
-
-tblovfl:
-	.long	EXT_RN
-	.long	EXT_RZ
-	.long	EXT_RM
-	.long	EXT_RP
-	.long	SGL_RN
-	.long	SGL_RZ
-	.long	SGL_RM
-	.long	SGL_RP
-	.long	DBL_RN
-	.long	DBL_RZ
-	.long	DBL_RM
-	.long	DBL_RP
-	.long	error
-	.long	error
-	.long	error
-	.long	error
-
-
-|
-|	ovf_r_k --- overflow result calculation
-|
-| This entry point is used by kernel_ex.
-|
-| This forces the destination precision to be extended
-|
-| Input:	operand in ETEMP
-| Output:	a result is in ETEMP (internal extended format)
-|
-	.global	ovf_r_k
-ovf_r_k:
-	lea	ETEMP(%a6),%a0	|a0 points to source operand
-	bclrb	#sign_bit,ETEMP_EX(%a6)
-	sne	ETEMP_SGN(%a6)	|convert to internal IEEE format
-
-|
-|	ovf_r_x2 --- overflow result calculation
-|
-| This entry point used by x_ovfl.  (opclass 0 and 2)
-|
-| Input		a0  points to an operand in the internal extended format
-| Output	a0  points to the result in the internal extended format
-|
-| This sets the round precision according to the user's FPCR unless the
-| instruction is fsgldiv or fsglmul or fsadd, fdadd, fsub, fdsub, fsmul,
-| fdmul, fsdiv, fddiv, fssqrt, fsmove, fdmove, fsabs, fdabs, fsneg, fdneg.
-| If the instruction is fsgldiv of fsglmul, the rounding precision must be
-| extended.  If the instruction is not fsgldiv or fsglmul but a force-
-| precision instruction, the rounding precision is then set to the force
-| precision.
-
-	.global	ovf_r_x2
-ovf_r_x2:
-	btstb	#E3,E_BYTE(%a6)		|check for nu exception
-	beql	ovf_e1_exc		|it is cu exception
-ovf_e3_exc:
-	movew	CMDREG3B(%a6),%d0		|get the command word
-	andiw	#0x00000060,%d0		|clear all bits except 6 and 5
-	cmpil	#0x00000040,%d0
-	beql	ovff_sgl		|force precision is single
-	cmpil	#0x00000060,%d0
-	beql	ovff_dbl		|force precision is double
-	movew	CMDREG3B(%a6),%d0		|get the command word again
-	andil	#0x7f,%d0			|clear all except operation
-	cmpil	#0x33,%d0
-	beql	ovf_fsgl		|fsglmul or fsgldiv
-	cmpil	#0x30,%d0
-	beql	ovf_fsgl
-	bra	ovf_fpcr		|instruction is none of the above
-|					;use FPCR
-ovf_e1_exc:
-	movew	CMDREG1B(%a6),%d0		|get command word
-	andil	#0x00000044,%d0		|clear all bits except 6 and 2
-	cmpil	#0x00000040,%d0
-	beql	ovff_sgl		|the instruction is force single
-	cmpil	#0x00000044,%d0
-	beql	ovff_dbl		|the instruction is force double
-	movew	CMDREG1B(%a6),%d0		|again get the command word
-	andil	#0x0000007f,%d0		|clear all except the op code
-	cmpil	#0x00000027,%d0
-	beql	ovf_fsgl		|fsglmul
-	cmpil	#0x00000024,%d0
-	beql	ovf_fsgl		|fsgldiv
-	bra	ovf_fpcr		|none of the above, use FPCR
-|
-|
-| Inst is either fsgldiv or fsglmul.  Force extended precision.
-|
-ovf_fsgl:
-	clrl	%d0
-	bra	ovf_res
-
-ovff_sgl:
-	movel	#0x00000001,%d0		|set single
-	bra	ovf_res
-ovff_dbl:
-	movel	#0x00000002,%d0		|set double
-	bra	ovf_res
-|
-| The precision is in the fpcr.
-|
-ovf_fpcr:
-	bfextu	FPCR_MODE(%a6){#0:#2},%d0 |set round precision
-	bra	ovf_res
-
-|
-|
-|	ovf_r_x3 --- overflow result calculation
-|
-| This entry point used by x_ovfl. (opclass 3 only)
-|
-| Input		a0  points to an operand in the internal extended format
-| Output	a0  points to the result in the internal extended format
-|
-| This sets the round precision according to the destination size.
-|
-	.global	ovf_r_x3
-ovf_r_x3:
-	bsr	g_dfmtou	|get dest fmt in d0{1:0}
-|				;for fmovout, the destination format
-|				;is the rounding precision
-
-|
-|	ovf_res --- overflow result calculation
-|
-| Input:
-|	a0	points to operand in internal extended format
-| Output:
-|	a0	points to result in internal extended format
-|
-	.global	ovf_res
-ovf_res:
-	lsll	#2,%d0		|move round precision to d0{3:2}
-	bfextu	FPCR_MODE(%a6){#2:#2},%d1 |set round mode
-	orl	%d1,%d0		|index is fmt:mode in d0{3:0}
-	leal	tblovfl,%a1	|load a1 with table address
-	movel	%a1@(%d0:l:4),%a1	|use d0 as index to the table
-	jmp	(%a1)		|go to the correct routine
-|
-|case DEST_FMT = EXT
-|
-EXT_RN:
-	leal	EXT_PINF,%a1	|answer is +/- infinity
-	bsetb	#inf_bit,FPSR_CC(%a6)
-	bra	set_sign	|now go set the sign
-EXT_RZ:
-	leal	EXT_PLRG,%a1	|answer is +/- large number
-	bra	set_sign	|now go set the sign
-EXT_RM:
-	tstb	LOCAL_SGN(%a0)	|if negative overflow
-	beqs	e_rm_pos
-e_rm_neg:
-	leal	EXT_PINF,%a1	|answer is negative infinity
-	orl	#neginf_mask,USER_FPSR(%a6)
-	bra	end_ovfr
-e_rm_pos:
-	leal	EXT_PLRG,%a1	|answer is large positive number
-	bra	end_ovfr
-EXT_RP:
-	tstb	LOCAL_SGN(%a0)	|if negative overflow
-	beqs	e_rp_pos
-e_rp_neg:
-	leal	EXT_PLRG,%a1	|answer is large negative number
-	bsetb	#neg_bit,FPSR_CC(%a6)
-	bra	end_ovfr
-e_rp_pos:
-	leal	EXT_PINF,%a1	|answer is positive infinity
-	bsetb	#inf_bit,FPSR_CC(%a6)
-	bra	end_ovfr
-|
-|case DEST_FMT = DBL
-|
-DBL_RN:
-	leal	EXT_PINF,%a1	|answer is +/- infinity
-	bsetb	#inf_bit,FPSR_CC(%a6)
-	bra	set_sign
-DBL_RZ:
-	leal	DBL_PLRG,%a1	|answer is +/- large number
-	bra	set_sign	|now go set the sign
-DBL_RM:
-	tstb	LOCAL_SGN(%a0)	|if negative overflow
-	beqs	d_rm_pos
-d_rm_neg:
-	leal	EXT_PINF,%a1	|answer is negative infinity
-	orl	#neginf_mask,USER_FPSR(%a6)
-	bra	end_ovfr	|inf is same for all precisions (ext,dbl,sgl)
-d_rm_pos:
-	leal	DBL_PLRG,%a1	|answer is large positive number
-	bra	end_ovfr
-DBL_RP:
-	tstb	LOCAL_SGN(%a0)	|if negative overflow
-	beqs	d_rp_pos
-d_rp_neg:
-	leal	DBL_PLRG,%a1	|answer is large negative number
-	bsetb	#neg_bit,FPSR_CC(%a6)
-	bra	end_ovfr
-d_rp_pos:
-	leal	EXT_PINF,%a1	|answer is positive infinity
-	bsetb	#inf_bit,FPSR_CC(%a6)
-	bra	end_ovfr
-|
-|case DEST_FMT = SGL
-|
-SGL_RN:
-	leal	EXT_PINF,%a1	|answer is +/-  infinity
-	bsetb	#inf_bit,FPSR_CC(%a6)
-	bras	set_sign
-SGL_RZ:
-	leal	SGL_PLRG,%a1	|answer is +/- large number
-	bras	set_sign
-SGL_RM:
-	tstb	LOCAL_SGN(%a0)	|if negative overflow
-	beqs	s_rm_pos
-s_rm_neg:
-	leal	EXT_PINF,%a1	|answer is negative infinity
-	orl	#neginf_mask,USER_FPSR(%a6)
-	bras	end_ovfr
-s_rm_pos:
-	leal	SGL_PLRG,%a1	|answer is large positive number
-	bras	end_ovfr
-SGL_RP:
-	tstb	LOCAL_SGN(%a0)	|if negative overflow
-	beqs	s_rp_pos
-s_rp_neg:
-	leal	SGL_PLRG,%a1	|answer is large negative number
-	bsetb	#neg_bit,FPSR_CC(%a6)
-	bras	end_ovfr
-s_rp_pos:
-	leal	EXT_PINF,%a1	|answer is positive infinity
-	bsetb	#inf_bit,FPSR_CC(%a6)
-	bras	end_ovfr
-
-set_sign:
-	tstb	LOCAL_SGN(%a0)	|if negative overflow
-	beqs	end_ovfr
-neg_sign:
-	bsetb	#neg_bit,FPSR_CC(%a6)
-
-end_ovfr:
-	movew	LOCAL_EX(%a1),LOCAL_EX(%a0) |do not overwrite sign
-	movel	LOCAL_HI(%a1),LOCAL_HI(%a0)
-	movel	LOCAL_LO(%a1),LOCAL_LO(%a0)
-	rts
-
-
-|
-|	ERROR
-|
-error:
-	rts
-|
-|	get_fline --- get f-line opcode of interrupted instruction
-|
-|	Returns opcode in the low word of d0.
-|
-get_fline:
-	movel	USER_FPIAR(%a6),%a0	|opcode address
-	movel	#0,-(%a7)	|reserve a word on the stack
-	leal	2(%a7),%a1	|point to low word of temporary
-	movel	#2,%d0		|count
-	bsrl	mem_read
-	movel	(%a7)+,%d0
-	rts
-|
-|	g_rndpr --- put rounding precision in d0{1:0}
-|
-|	valid return codes are:
-|		00 - extended
-|		01 - single
-|		10 - double
-|
-| begin
-| get rounding precision (cmdreg3b{6:5})
-| begin
-|  case	opclass = 011 (move out)
-|	get destination format - this is the also the rounding precision
-|
-|  case	opclass = 0x0
-|	if E3
-|	    *case RndPr(from cmdreg3b{6:5} = 11  then RND_PREC = DBL
-|	    *case RndPr(from cmdreg3b{6:5} = 10  then RND_PREC = SGL
-|	     case RndPr(from cmdreg3b{6:5} = 00 | 01
-|		use precision from FPCR{7:6}
-|			case 00 then RND_PREC = EXT
-|			case 01 then RND_PREC = SGL
-|			case 10 then RND_PREC = DBL
-|	else E1
-|	     use precision in FPCR{7:6}
-|	     case 00 then RND_PREC = EXT
-|	     case 01 then RND_PREC = SGL
-|	     case 10 then RND_PREC = DBL
-| end
-|
-g_rndpr:
-	bsr	g_opcls		|get opclass in d0{2:0}
-	cmpw	#0x0003,%d0	|check for opclass 011
-	bnes	op_0x0
-
-|
-| For move out instructions (opclass 011) the destination format
-| is the same as the rounding precision.  Pass results from g_dfmtou.
-|
-	bsr	g_dfmtou
-	rts
-op_0x0:
-	btstb	#E3,E_BYTE(%a6)
-	beql	unf_e1_exc	|branch to e1 underflow
-unf_e3_exc:
-	movel	CMDREG3B(%a6),%d0	|rounding precision in d0{10:9}
-	bfextu	%d0{#9:#2},%d0	|move the rounding prec bits to d0{1:0}
-	cmpil	#0x2,%d0
-	beql	unff_sgl	|force precision is single
-	cmpil	#0x3,%d0		|force precision is double
-	beql	unff_dbl
-	movew	CMDREG3B(%a6),%d0	|get the command word again
-	andil	#0x7f,%d0		|clear all except operation
-	cmpil	#0x33,%d0
-	beql	unf_fsgl	|fsglmul or fsgldiv
-	cmpil	#0x30,%d0
-	beql	unf_fsgl	|fsgldiv or fsglmul
-	bra	unf_fpcr
-unf_e1_exc:
-	movel	CMDREG1B(%a6),%d0	|get 32 bits off the stack, 1st 16 bits
-|				;are the command word
-	andil	#0x00440000,%d0	|clear all bits except bits 6 and 2
-	cmpil	#0x00400000,%d0
-	beql	unff_sgl	|force single
-	cmpil	#0x00440000,%d0	|force double
-	beql	unff_dbl
-	movel	CMDREG1B(%a6),%d0	|get the command word again
-	andil	#0x007f0000,%d0	|clear all bits except the operation
-	cmpil	#0x00270000,%d0
-	beql	unf_fsgl	|fsglmul
-	cmpil	#0x00240000,%d0
-	beql	unf_fsgl	|fsgldiv
-	bra	unf_fpcr
-
-|
-| Convert to return format.  The values from cmdreg3b and the return
-| values are:
-|	cmdreg3b	return	     precision
-|	--------	------	     ---------
-|	  00,01		  0		ext
-|	   10		  1		sgl
-|	   11		  2		dbl
-| Force single
-|
-unff_sgl:
-	movel	#1,%d0		|return 1
-	rts
-|
-| Force double
-|
-unff_dbl:
-	movel	#2,%d0		|return 2
-	rts
-|
-| Force extended
-|
-unf_fsgl:
-	movel	#0,%d0
-	rts
-|
-| Get rounding precision set in FPCR{7:6}.
-|
-unf_fpcr:
-	movel	USER_FPCR(%a6),%d0 |rounding precision bits in d0{7:6}
-	bfextu	%d0{#24:#2},%d0	|move the rounding prec bits to d0{1:0}
-	rts
-|
-|	g_opcls --- put opclass in d0{2:0}
-|
-g_opcls:
-	btstb	#E3,E_BYTE(%a6)
-	beqs	opc_1b		|if set, go to cmdreg1b
-opc_3b:
-	clrl	%d0		|if E3, only opclass 0x0 is possible
-	rts
-opc_1b:
-	movel	CMDREG1B(%a6),%d0
-	bfextu	%d0{#0:#3},%d0	|shift opclass bits d0{31:29} to d0{2:0}
-	rts
-|
-|	g_dfmtou --- put destination format in d0{1:0}
-|
-|	If E1, the format is from cmdreg1b{12:10}
-|	If E3, the format is extended.
-|
-|	Dest. Fmt.
-|		extended  010 -> 00
-|		single    001 -> 01
-|		double    101 -> 10
-|
-g_dfmtou:
-	btstb	#E3,E_BYTE(%a6)
-	beqs	op011
-	clrl	%d0		|if E1, size is always ext
-	rts
-op011:
-	movel	CMDREG1B(%a6),%d0
-	bfextu	%d0{#3:#3},%d0	|dest fmt from cmdreg1b{12:10}
-	cmpb	#1,%d0		|check for single
-	bnes	not_sgl
-	movel	#1,%d0
-	rts
-not_sgl:
-	cmpb	#5,%d0		|check for double
-	bnes	not_dbl
-	movel	#2,%d0
-	rts
-not_dbl:
-	clrl	%d0		|must be extended
-	rts
-
-|
-|
-| Final result table for unf_sub. Note that the negative counterparts
-| are unnecessary as unf_sub always returns the sign separately from
-| the exponent.
-|					;+zero
-EXT_PZRO:	.long	0x00000000,0x00000000,0x00000000,0x00000000
-|					;+zero
-SGL_PZRO:	.long	0x3f810000,0x00000000,0x00000000,0x00000000
-|					;+zero
-DBL_PZRO:	.long	0x3c010000,0x00000000,0x00000000,0x00000000
-|					;smallest +ext denorm
-EXT_PSML:	.long	0x00000000,0x00000000,0x00000001,0x00000000
-|					;smallest +sgl denorm
-SGL_PSML:	.long	0x3f810000,0x00000100,0x00000000,0x00000000
-|					;smallest +dbl denorm
-DBL_PSML:	.long	0x3c010000,0x00000000,0x00000800,0x00000000
-|
-|	UNF_SUB --- underflow result calculation
-|
-| Input:
-|	d0	contains round precision
-|	a0	points to input operand in the internal extended format
-|
-| Output:
-|	a0	points to correct internal extended precision result.
-|
-
-tblunf:
-	.long	uEXT_RN
-	.long	uEXT_RZ
-	.long	uEXT_RM
-	.long	uEXT_RP
-	.long	uSGL_RN
-	.long	uSGL_RZ
-	.long	uSGL_RM
-	.long	uSGL_RP
-	.long	uDBL_RN
-	.long	uDBL_RZ
-	.long	uDBL_RM
-	.long	uDBL_RP
-	.long	uDBL_RN
-	.long	uDBL_RZ
-	.long	uDBL_RM
-	.long	uDBL_RP
-
-	.global	unf_sub
-unf_sub:
-	lsll	#2,%d0		|move round precision to d0{3:2}
-	bfextu	FPCR_MODE(%a6){#2:#2},%d1 |set round mode
-	orl	%d1,%d0		|index is fmt:mode in d0{3:0}
-	leal	tblunf,%a1	|load a1 with table address
-	movel	%a1@(%d0:l:4),%a1	|use d0 as index to the table
-	jmp	(%a1)		|go to the correct routine
-|
-|case DEST_FMT = EXT
-|
-uEXT_RN:
-	leal	EXT_PZRO,%a1	|answer is +/- zero
-	bsetb	#z_bit,FPSR_CC(%a6)
-	bra	uset_sign	|now go set the sign
-uEXT_RZ:
-	leal	EXT_PZRO,%a1	|answer is +/- zero
-	bsetb	#z_bit,FPSR_CC(%a6)
-	bra	uset_sign	|now go set the sign
-uEXT_RM:
-	tstb	LOCAL_SGN(%a0)	|if negative underflow
-	beqs	ue_rm_pos
-ue_rm_neg:
-	leal	EXT_PSML,%a1	|answer is negative smallest denorm
-	bsetb	#neg_bit,FPSR_CC(%a6)
-	bra	end_unfr
-ue_rm_pos:
-	leal	EXT_PZRO,%a1	|answer is positive zero
-	bsetb	#z_bit,FPSR_CC(%a6)
-	bra	end_unfr
-uEXT_RP:
-	tstb	LOCAL_SGN(%a0)	|if negative underflow
-	beqs	ue_rp_pos
-ue_rp_neg:
-	leal	EXT_PZRO,%a1	|answer is negative zero
-	oril	#negz_mask,USER_FPSR(%a6)
-	bra	end_unfr
-ue_rp_pos:
-	leal	EXT_PSML,%a1	|answer is positive smallest denorm
-	bra	end_unfr
-|
-|case DEST_FMT = DBL
-|
-uDBL_RN:
-	leal	DBL_PZRO,%a1	|answer is +/- zero
-	bsetb	#z_bit,FPSR_CC(%a6)
-	bra	uset_sign
-uDBL_RZ:
-	leal	DBL_PZRO,%a1	|answer is +/- zero
-	bsetb	#z_bit,FPSR_CC(%a6)
-	bra	uset_sign	|now go set the sign
-uDBL_RM:
-	tstb	LOCAL_SGN(%a0)	|if negative overflow
-	beqs	ud_rm_pos
-ud_rm_neg:
-	leal	DBL_PSML,%a1	|answer is smallest denormalized negative
-	bsetb	#neg_bit,FPSR_CC(%a6)
-	bra	end_unfr
-ud_rm_pos:
-	leal	DBL_PZRO,%a1	|answer is positive zero
-	bsetb	#z_bit,FPSR_CC(%a6)
-	bra	end_unfr
-uDBL_RP:
-	tstb	LOCAL_SGN(%a0)	|if negative overflow
-	beqs	ud_rp_pos
-ud_rp_neg:
-	leal	DBL_PZRO,%a1	|answer is negative zero
-	oril	#negz_mask,USER_FPSR(%a6)
-	bra	end_unfr
-ud_rp_pos:
-	leal	DBL_PSML,%a1	|answer is smallest denormalized negative
-	bra	end_unfr
-|
-|case DEST_FMT = SGL
-|
-uSGL_RN:
-	leal	SGL_PZRO,%a1	|answer is +/- zero
-	bsetb	#z_bit,FPSR_CC(%a6)
-	bras	uset_sign
-uSGL_RZ:
-	leal	SGL_PZRO,%a1	|answer is +/- zero
-	bsetb	#z_bit,FPSR_CC(%a6)
-	bras	uset_sign
-uSGL_RM:
-	tstb	LOCAL_SGN(%a0)	|if negative overflow
-	beqs	us_rm_pos
-us_rm_neg:
-	leal	SGL_PSML,%a1	|answer is smallest denormalized negative
-	bsetb	#neg_bit,FPSR_CC(%a6)
-	bras	end_unfr
-us_rm_pos:
-	leal	SGL_PZRO,%a1	|answer is positive zero
-	bsetb	#z_bit,FPSR_CC(%a6)
-	bras	end_unfr
-uSGL_RP:
-	tstb	LOCAL_SGN(%a0)	|if negative overflow
-	beqs	us_rp_pos
-us_rp_neg:
-	leal	SGL_PZRO,%a1	|answer is negative zero
-	oril	#negz_mask,USER_FPSR(%a6)
-	bras	end_unfr
-us_rp_pos:
-	leal	SGL_PSML,%a1	|answer is smallest denormalized positive
-	bras	end_unfr
-
-uset_sign:
-	tstb	LOCAL_SGN(%a0)	|if negative overflow
-	beqs	end_unfr
-uneg_sign:
-	bsetb	#neg_bit,FPSR_CC(%a6)
-
-end_unfr:
-	movew	LOCAL_EX(%a1),LOCAL_EX(%a0) |be careful not to overwrite sign
-	movel	LOCAL_HI(%a1),LOCAL_HI(%a0)
-	movel	LOCAL_LO(%a1),LOCAL_LO(%a0)
-	rts
-|
-|	reg_dest --- write byte, word, or long data to Dn
-|
-|
-| Input:
-|	L_SCR1: Data
-|	d1:     data size and dest register number formatted as:
-|
-|	32		5    4     3     2     1     0
-|       -----------------------------------------------
-|       |        0        |    Size   |  Dest Reg #   |
-|       -----------------------------------------------
-|
-|	Size is:
-|		0 - Byte
-|		1 - Word
-|		2 - Long/Single
-|
-pregdst:
-	.long	byte_d0
-	.long	byte_d1
-	.long	byte_d2
-	.long	byte_d3
-	.long	byte_d4
-	.long	byte_d5
-	.long	byte_d6
-	.long	byte_d7
-	.long	word_d0
-	.long	word_d1
-	.long	word_d2
-	.long	word_d3
-	.long	word_d4
-	.long	word_d5
-	.long	word_d6
-	.long	word_d7
-	.long	long_d0
-	.long	long_d1
-	.long	long_d2
-	.long	long_d3
-	.long	long_d4
-	.long	long_d5
-	.long	long_d6
-	.long	long_d7
-
-reg_dest:
-	leal	pregdst,%a0
-	movel	%a0@(%d1:l:4),%a0
-	jmp	(%a0)
-
-byte_d0:
-	moveb	L_SCR1(%a6),USER_D0+3(%a6)
-	rts
-byte_d1:
-	moveb	L_SCR1(%a6),USER_D1+3(%a6)
-	rts
-byte_d2:
-	moveb	L_SCR1(%a6),%d2
-	rts
-byte_d3:
-	moveb	L_SCR1(%a6),%d3
-	rts
-byte_d4:
-	moveb	L_SCR1(%a6),%d4
-	rts
-byte_d5:
-	moveb	L_SCR1(%a6),%d5
-	rts
-byte_d6:
-	moveb	L_SCR1(%a6),%d6
-	rts
-byte_d7:
-	moveb	L_SCR1(%a6),%d7
-	rts
-word_d0:
-	movew	L_SCR1(%a6),USER_D0+2(%a6)
-	rts
-word_d1:
-	movew	L_SCR1(%a6),USER_D1+2(%a6)
-	rts
-word_d2:
-	movew	L_SCR1(%a6),%d2
-	rts
-word_d3:
-	movew	L_SCR1(%a6),%d3
-	rts
-word_d4:
-	movew	L_SCR1(%a6),%d4
-	rts
-word_d5:
-	movew	L_SCR1(%a6),%d5
-	rts
-word_d6:
-	movew	L_SCR1(%a6),%d6
-	rts
-word_d7:
-	movew	L_SCR1(%a6),%d7
-	rts
-long_d0:
-	movel	L_SCR1(%a6),USER_D0(%a6)
-	rts
-long_d1:
-	movel	L_SCR1(%a6),USER_D1(%a6)
-	rts
-long_d2:
-	movel	L_SCR1(%a6),%d2
-	rts
-long_d3:
-	movel	L_SCR1(%a6),%d3
-	rts
-long_d4:
-	movel	L_SCR1(%a6),%d4
-	rts
-long_d5:
-	movel	L_SCR1(%a6),%d5
-	rts
-long_d6:
-	movel	L_SCR1(%a6),%d6
-	rts
-long_d7:
-	movel	L_SCR1(%a6),%d7
-	rts
-	|end
diff --git a/ANDROID_3.4.5/arch/m68k/fpsp040/x_bsun.S b/ANDROID_3.4.5/arch/m68k/fpsp040/x_bsun.S
deleted file mode 100644
index d5a576bf..00000000
--- a/ANDROID_3.4.5/arch/m68k/fpsp040/x_bsun.S
+++ /dev/null
@@ -1,46 +0,0 @@
-|
-|	x_bsun.sa 3.3 7/1/91
-|
-|	fpsp_bsun --- FPSP handler for branch/set on unordered exception
-|
-|	Copy the PC to FPIAR to maintain 881/882 compatibility
-|
-|	The real_bsun handler will need to perform further corrective
-|	measures as outlined in the 040 User's Manual on pages
-|	9-41f, section 9.8.3.
-|
-
-|		Copyright (C) Motorola, Inc. 1990
-|			All Rights Reserved
-|
-|       For details on the license for this file, please see the
-|       file, README, in this same directory.
-
-X_BSUN:	|idnt    2,1 | Motorola 040 Floating Point Software Package
-
-	|section	8
-
-#include "fpsp.h"
-
-	|xref	real_bsun
-
-	.global	fpsp_bsun
-fpsp_bsun:
-|
-	link		%a6,#-LOCAL_SIZE
-	fsave		-(%a7)
-	moveml		%d0-%d1/%a0-%a1,USER_DA(%a6)
-	fmovemx	%fp0-%fp3,USER_FP0(%a6)
-	fmoveml	%fpcr/%fpsr/%fpiar,USER_FPCR(%a6)
-
-|
-	movel		EXC_PC(%a6),USER_FPIAR(%a6)
-|
-	moveml		USER_DA(%a6),%d0-%d1/%a0-%a1
-	fmovemx	USER_FP0(%a6),%fp0-%fp3
-	fmoveml	USER_FPCR(%a6),%fpcr/%fpsr/%fpiar
-	frestore	(%a7)+
-	unlk		%a6
-	bral		real_bsun
-|
-	|end
diff --git a/ANDROID_3.4.5/arch/m68k/fpsp040/x_fline.S b/ANDROID_3.4.5/arch/m68k/fpsp040/x_fline.S
deleted file mode 100644
index 264e126d..00000000
--- a/ANDROID_3.4.5/arch/m68k/fpsp040/x_fline.S
+++ /dev/null
@@ -1,103 +0,0 @@
-|
-|	x_fline.sa 3.3 1/10/91
-|
-|	fpsp_fline --- FPSP handler for fline exception
-|
-|	First determine if the exception is one of the unimplemented
-|	floating point instructions.  If so, let fpsp_unimp handle it.
-|	Next, determine if the instruction is an fmovecr with a non-zero
-|	<ea> field.  If so, handle here and return.  Otherwise, it
-|	must be a real F-line exception.
-|
-
-|		Copyright (C) Motorola, Inc. 1990
-|			All Rights Reserved
-|
-|       For details on the license for this file, please see the
-|       file, README, in this same directory.
-
-X_FLINE:	|idnt    2,1 | Motorola 040 Floating Point Software Package
-
-	|section	8
-
-#include "fpsp.h"
-
-	|xref	real_fline
-	|xref	fpsp_unimp
-	|xref	uni_2
-	|xref	mem_read
-	|xref	fpsp_fmt_error
-
-	.global	fpsp_fline
-fpsp_fline:
-|
-|	check for unimplemented vector first.  Use EXC_VEC-4 because
-|	the equate is valid only after a 'link a6' has pushed one more
-|	long onto the stack.
-|
-	cmpw	#UNIMP_VEC,EXC_VEC-4(%a7)
-	beql	fpsp_unimp
-
-|
-|	fmovecr with non-zero <ea> handling here
-|
-	subl	#4,%a7		|4 accounts for 2-word difference
-|				;between six word frame (unimp) and
-|				;four word frame
-	link	%a6,#-LOCAL_SIZE
-	fsave	-(%a7)
-	moveml	%d0-%d1/%a0-%a1,USER_DA(%a6)
-	moveal	EXC_PC+4(%a6),%a0	|get address of fline instruction
-	leal	L_SCR1(%a6),%a1	|use L_SCR1 as scratch
-	movel	#4,%d0
-	addl	#4,%a6		|to offset the sub.l #4,a7 above so that
-|				;a6 can point correctly to the stack frame
-|				;before branching to mem_read
-	bsrl	mem_read
-	subl	#4,%a6
-	movel	L_SCR1(%a6),%d0	|d0 contains the fline and command word
-	bfextu	%d0{#4:#3},%d1	|extract coprocessor id
-	cmpib	#1,%d1		|check if cpid=1
-	bne	not_mvcr	|exit if not
-	bfextu	%d0{#16:#6},%d1
-	cmpib	#0x17,%d1		|check if it is an FMOVECR encoding
-	bne	not_mvcr
-|				;if an FMOVECR instruction, fix stack
-|				;and go to FPSP_UNIMP
-fix_stack:
-	cmpib	#VER_40,(%a7)	|test for orig unimp frame
-	bnes	ck_rev
-	subl	#UNIMP_40_SIZE-4,%a7 |emulate an orig fsave
-	moveb	#VER_40,(%a7)
-	moveb	#UNIMP_40_SIZE-4,1(%a7)
-	clrw	2(%a7)
-	bras	fix_con
-ck_rev:
-	cmpib	#VER_41,(%a7)	|test for rev unimp frame
-	bnel	fpsp_fmt_error	|if not $40 or $41, exit with error
-	subl	#UNIMP_41_SIZE-4,%a7 |emulate a rev fsave
-	moveb	#VER_41,(%a7)
-	moveb	#UNIMP_41_SIZE-4,1(%a7)
-	clrw	2(%a7)
-fix_con:
-	movew	EXC_SR+4(%a6),EXC_SR(%a6) |move stacked sr to new position
-	movel	EXC_PC+4(%a6),EXC_PC(%a6) |move stacked pc to new position
-	fmovel	EXC_PC(%a6),%FPIAR |point FPIAR to fline inst
-	movel	#4,%d1
-	addl	%d1,EXC_PC(%a6)	|increment stacked pc value to next inst
-	movew	#0x202c,EXC_VEC(%a6) |reformat vector to unimp
-	clrl	EXC_EA(%a6)	|clear the EXC_EA field
-	movew	%d0,CMDREG1B(%a6) |move the lower word into CMDREG1B
-	clrl	E_BYTE(%a6)
-	bsetb	#UFLAG,T_BYTE(%a6)
-	moveml	USER_DA(%a6),%d0-%d1/%a0-%a1 |restore data registers
-	bral	uni_2
-
-not_mvcr:
-	moveml	USER_DA(%a6),%d0-%d1/%a0-%a1 |restore data registers
-	frestore (%a7)+
-	unlk	%a6
-	addl	#4,%a7
-	bral	real_fline
-
-	|end
diff --git a/ANDROID_3.4.5/arch/m68k/fpsp040/x_operr.S b/ANDROID_3.4.5/arch/m68k/fpsp040/x_operr.S
deleted file mode 100644
index e2c371c3..00000000
--- a/ANDROID_3.4.5/arch/m68k/fpsp040/x_operr.S
+++ /dev/null
@@ -1,355 +0,0 @@
-|
-|	x_operr.sa 3.5 7/1/91
-|
-|	fpsp_operr --- FPSP handler for operand error exception
-|
-|	See 68040 User's Manual pp. 9-44f
-|
-| Note 1: For trap disabled 040 does the following:
-| If the dest is a fp reg, then an extended precision non_signaling
-| NAN is stored in the dest reg.  If the dest format is b, w, or l and
-| the source op is a NAN, then garbage is stored as the result (actually
-| the upper 32 bits of the mantissa are sent to the integer unit). If
-| the dest format is integer (b, w, l) and the operr is caused by
-| integer overflow, or the source op is inf, then the result stored is
-| garbage.
-| There are three cases in which operr is incorrectly signaled on the
-| 040.  This occurs for move_out of format b, w, or l for the largest
-| negative integer (-2^7 for b, -2^15 for w, -2^31 for l).
-|
-|	  On opclass = 011 fmove.(b,w,l) that causes a conversion
-|	  overflow -> OPERR, the exponent in wbte (and fpte) is:
-|		byte    56 - (62 - exp)
-|		word    48 - (62 - exp)
-|		long    32 - (62 - exp)
-|
-|			where exp = (true exp) - 1
-|
-|  So, wbtemp and fptemp will contain the following on erroneously
-|	  signalled operr:
-|			fpts = 1
-|			fpte = $4000  (15 bit externally)
-|		byte	fptm = $ffffffff ffffff80
-|		word	fptm = $ffffffff ffff8000
-|		long	fptm = $ffffffff 80000000
-|
-| Note 2: For trap enabled 040 does the following:
-| If the inst is move_out, then same as Note 1.
-| If the inst is not move_out, the dest is not modified.
-| The exceptional operand is not defined for integer overflow
-| during a move_out.
-|
-
-|		Copyright (C) Motorola, Inc. 1990
-|			All Rights Reserved
-|
-|       For details on the license for this file, please see the
-|       file, README, in this same directory.
-
-X_OPERR:	|idnt    2,1 | Motorola 040 Floating Point Software Package
-
-	|section	8
-
-#include "fpsp.h"
-
-	|xref	mem_write
-	|xref	real_operr
-	|xref	real_inex
-	|xref	get_fline
-	|xref	fpsp_done
-	|xref	reg_dest
-
-	.global	fpsp_operr
-fpsp_operr:
-|
-	link		%a6,#-LOCAL_SIZE
-	fsave		-(%a7)
-	moveml		%d0-%d1/%a0-%a1,USER_DA(%a6)
-	fmovemx	%fp0-%fp3,USER_FP0(%a6)
-	fmoveml	%fpcr/%fpsr/%fpiar,USER_FPCR(%a6)
-
-|
-| Check if this is an opclass 3 instruction.
-|  If so, fall through, else branch to operr_end
-|
-	btstb	#TFLAG,T_BYTE(%a6)
-	beqs	operr_end
-
-|
-| If the destination size is B,W,or L, the operr must be
-| handled here.
-|
-	movel	CMDREG1B(%a6),%d0
-	bfextu	%d0{#3:#3},%d0	|0=long, 4=word, 6=byte
-	cmpib	#0,%d0		|determine size; check long
-	beq	operr_long
-	cmpib	#4,%d0		|check word
-	beq	operr_word
-	cmpib	#6,%d0		|check byte
-	beq	operr_byte
-
-|
-| The size is not B,W,or L, so the operr is handled by the
-| kernel handler.  Set the operr bits and clean up, leaving
-| only the integer exception frame on the stack, and the
-| fpu in the original exceptional state.
-|
-operr_end:
-	bsetb		#operr_bit,FPSR_EXCEPT(%a6)
-	bsetb		#aiop_bit,FPSR_AEXCEPT(%a6)
-
-	moveml		USER_DA(%a6),%d0-%d1/%a0-%a1
-	fmovemx	USER_FP0(%a6),%fp0-%fp3
-	fmoveml	USER_FPCR(%a6),%fpcr/%fpsr/%fpiar
-	frestore	(%a7)+
-	unlk		%a6
-	bral		real_operr
-
-operr_long:
-	moveql	#4,%d1		|write size to d1
-	moveb	STAG(%a6),%d0	|test stag for nan
-	andib	#0xe0,%d0		|clr all but tag
-	cmpib	#0x60,%d0		|check for nan
-	beq	operr_nan
-	cmpil	#0x80000000,FPTEMP_LO(%a6) |test if ls lword is special
-	bnes	chklerr		|if not equal, check for incorrect operr
-	bsr	check_upper	|check if exp and ms mant are special
-	tstl	%d0
-	bnes	chklerr		|if d0 is true, check for incorrect operr
-	movel	#0x80000000,%d0	|store special case result
-	bsr	operr_store
-	bra	not_enabled	|clean and exit
-|
-|	CHECK FOR INCORRECTLY GENERATED OPERR EXCEPTION HERE
-|
-chklerr:
-	movew	FPTEMP_EX(%a6),%d0
-	andw	#0x7FFF,%d0	|ignore sign bit
-	cmpw	#0x3FFE,%d0	|this is the only possible exponent value
-	bnes	chklerr2
-fixlong:
-	movel	FPTEMP_LO(%a6),%d0
-	bsr	operr_store
-	bra	not_enabled
-chklerr2:
-	movew	FPTEMP_EX(%a6),%d0
-	andw	#0x7FFF,%d0	|ignore sign bit
-	cmpw	#0x4000,%d0
-	bcc	store_max	|exponent out of range
-
-	movel	FPTEMP_LO(%a6),%d0
-	andl	#0x7FFF0000,%d0	|look for all 1's on bits 30-16
-	cmpl	#0x7FFF0000,%d0
-	beqs	fixlong
-
-	tstl	FPTEMP_LO(%a6)
-	bpls	chklepos
-	cmpl	#0xFFFFFFFF,FPTEMP_HI(%a6)
-	beqs	fixlong
-	bra	store_max
-chklepos:
-	tstl	FPTEMP_HI(%a6)
-	beqs	fixlong
-	bra	store_max
-
-operr_word:
-	moveql	#2,%d1		|write size to d1
-	moveb	STAG(%a6),%d0	|test stag for nan
-	andib	#0xe0,%d0		|clr all but tag
-	cmpib	#0x60,%d0		|check for nan
-	beq	operr_nan
-	cmpil	#0xffff8000,FPTEMP_LO(%a6) |test if ls lword is special
-	bnes	chkwerr		|if not equal, check for incorrect operr
-	bsr	check_upper	|check if exp and ms mant are special
-	tstl	%d0
-	bnes	chkwerr		|if d0 is true, check for incorrect operr
-	movel	#0x80000000,%d0	|store special case result
-	bsr	operr_store
-	bra	not_enabled	|clean and exit
-|
-|	CHECK FOR INCORRECTLY GENERATED OPERR EXCEPTION HERE
-|
-chkwerr:
-	movew	FPTEMP_EX(%a6),%d0
-	andw	#0x7FFF,%d0	|ignore sign bit
-	cmpw	#0x3FFE,%d0	|this is the only possible exponent value
-	bnes	store_max
-	movel	FPTEMP_LO(%a6),%d0
-	swap	%d0
-	bsr	operr_store
-	bra	not_enabled
-
-operr_byte:
-	moveql	#1,%d1		|write size to d1
-	moveb	STAG(%a6),%d0	|test stag for nan
-	andib	#0xe0,%d0		|clr all but tag
-	cmpib	#0x60,%d0		|check for nan
-	beqs	operr_nan
-	cmpil	#0xffffff80,FPTEMP_LO(%a6) |test if ls lword is special
-	bnes	chkberr		|if not equal, check for incorrect operr
-	bsr	check_upper	|check if exp and ms mant are special
-	tstl	%d0
-	bnes	chkberr		|if d0 is true, check for incorrect operr
-	movel	#0x80000000,%d0	|store special case result
-	bsr	operr_store
-	bra	not_enabled	|clean and exit
-|
-|	CHECK FOR INCORRECTLY GENERATED OPERR EXCEPTION HERE
-|
-chkberr:
-	movew	FPTEMP_EX(%a6),%d0
-	andw	#0x7FFF,%d0	|ignore sign bit
-	cmpw	#0x3FFE,%d0	|this is the only possible exponent value
-	bnes	store_max
-	movel	FPTEMP_LO(%a6),%d0
-	asll	#8,%d0
-	swap	%d0
-	bsr	operr_store
-	bra	not_enabled
-
-|
-| This operr condition is not of the special case.  Set operr
-| and aiop and write the portion of the nan to memory for the
-| given size.
-|
-operr_nan:
-	orl	#opaop_mask,USER_FPSR(%a6) |set operr & aiop
-
-	movel	ETEMP_HI(%a6),%d0	|output will be from upper 32 bits
-	bsr	operr_store
-	bra	end_operr
-|
-| Store_max loads the max pos or negative for the size, sets
-| the operr and aiop bits, and clears inex and ainex, incorrectly
-| set by the 040.
-|
-store_max:
-	orl	#opaop_mask,USER_FPSR(%a6) |set operr & aiop
-	bclrb	#inex2_bit,FPSR_EXCEPT(%a6)
-	bclrb	#ainex_bit,FPSR_AEXCEPT(%a6)
-	fmovel	#0,%FPSR
-
-	tstw	FPTEMP_EX(%a6)	|check sign
-	blts	load_neg
-	movel	#0x7fffffff,%d0
-	bsr	operr_store
-	bra	end_operr
-load_neg:
-	movel	#0x80000000,%d0
-	bsr	operr_store
-	bra	end_operr
-
-|
-| This routine stores the data in d0, for the given size in d1,
-| to memory or data register as required.  A read of the fline
-| is required to determine the destination.
-|
-operr_store:
-	movel	%d0,L_SCR1(%a6)	|move write data to L_SCR1
-	movel	%d1,-(%a7)	|save register size
-	bsrl	get_fline	|fline returned in d0
-	movel	(%a7)+,%d1
-	bftst	%d0{#26:#3}		|if mode is zero, dest is Dn
-	bnes	dest_mem
-|
-| Destination is Dn.  Get register number from d0. Data is on
-| the stack at (a7). D1 has size: 1=byte,2=word,4=long/single
-|
-	andil	#7,%d0		|isolate register number
-	cmpil	#4,%d1
-	beqs	op_long		|the most frequent case
-	cmpil	#2,%d1
-	bnes	op_con
-	orl	#8,%d0
-	bras	op_con
-op_long:
-	orl	#0x10,%d0
-op_con:
-	movel	%d0,%d1		|format size:reg for reg_dest
-	bral	reg_dest	|call to reg_dest returns to caller
-|				;of operr_store
-|
-| Destination is memory.  Get <ea> from integer exception frame
-| and call mem_write.
-|
-dest_mem:
-	leal	L_SCR1(%a6),%a0	|put ptr to write data in a0
-	movel	EXC_EA(%a6),%a1	|put user destination address in a1
-	movel	%d1,%d0		|put size in d0
-	bsrl	mem_write
-	rts
-|
-| Check the exponent for $c000 and the upper 32 bits of the
-| mantissa for $ffffffff.  If both are true, return d0 clr
-| and store the lower n bits of the least lword of FPTEMP
-| to d0 for write out.  If not, it is a real operr, and set d0.
-|
-check_upper:
-	cmpil	#0xffffffff,FPTEMP_HI(%a6) |check if first byte is all 1's
-	bnes	true_operr	|if not all 1's then was true operr
-	cmpiw	#0xc000,FPTEMP_EX(%a6) |check if incorrectly signalled
-	beqs	not_true_operr	|branch if not true operr
-	cmpiw	#0xbfff,FPTEMP_EX(%a6) |check if incorrectly signalled
-	beqs	not_true_operr	|branch if not true operr
-true_operr:
-	movel	#1,%d0		|signal real operr
-	rts
-not_true_operr:
-	clrl	%d0		|signal no real operr
-	rts
-
-|
-| End_operr tests for operr enabled.  If not, it cleans up the stack
-| and does an rte.  If enabled, it cleans up the stack and branches
-| to the kernel operr handler with only the integer exception
-| frame on the stack and the fpu in the original exceptional state
-| with correct data written to the destination.
-|
-end_operr:
-	btstb		#operr_bit,FPCR_ENABLE(%a6)
-	beqs		not_enabled
-enabled:
-	moveml		USER_DA(%a6),%d0-%d1/%a0-%a1
-	fmovemx	USER_FP0(%a6),%fp0-%fp3
-	fmoveml	USER_FPCR(%a6),%fpcr/%fpsr/%fpiar
-	frestore	(%a7)+
-	unlk		%a6
-	bral		real_operr
-
-not_enabled:
-|
-| It is possible to have either inex2 or inex1 exceptions with the
-| operr.  If the inex enable bit is set in the FPCR, and either
-| inex2 or inex1 occurred, we must clean up and branch to the
-| real inex handler.
-|
-ck_inex:
-	moveb	FPCR_ENABLE(%a6),%d0
-	andb	FPSR_EXCEPT(%a6),%d0
-	andib	#0x3,%d0
-	beq	operr_exit
-|
-| Inexact enabled and reported, and we must take an inexact exception.
-|
-take_inex:
-	moveb		#INEX_VEC,EXC_VEC+1(%a6)
-	movel		USER_FPSR(%a6),FPSR_SHADOW(%a6)
-	orl		#sx_mask,E_BYTE(%a6)
-	moveml		USER_DA(%a6),%d0-%d1/%a0-%a1
-	fmovemx	USER_FP0(%a6),%fp0-%fp3
-	fmoveml	USER_FPCR(%a6),%fpcr/%fpsr/%fpiar
-	frestore	(%a7)+
-	unlk		%a6
-	bral		real_inex
-|
-| Since operr is only an E1 exception, there is no need to frestore
-| any state back to the fpu.
-|
-operr_exit:
-	moveml		USER_DA(%a6),%d0-%d1/%a0-%a1
-	fmovemx	USER_FP0(%a6),%fp0-%fp3
-	fmoveml	USER_FPCR(%a6),%fpcr/%fpsr/%fpiar
-	unlk		%a6
-	bral		fpsp_done
-
-	|end
diff --git a/ANDROID_3.4.5/arch/m68k/fpsp040/x_ovfl.S b/ANDROID_3.4.5/arch/m68k/fpsp040/x_ovfl.S
deleted file mode 100644
index 6fe4989e..00000000
--- a/ANDROID_3.4.5/arch/m68k/fpsp040/x_ovfl.S
+++ /dev/null
@@ -1,185 +0,0 @@
-|
-|	x_ovfl.sa 3.5 7/1/91
-|
-|	fpsp_ovfl --- FPSP handler for overflow exception
-|
-|	Overflow occurs when a floating-point intermediate result is
-|	too large to be represented in a floating-point data register,
-|	or when storing to memory, the contents of a floating-point
-|	data register are too large to be represented in the
-|	destination format.
-|
-| Trap disabled results
-|
-| If the instruction is move_out, then garbage is stored in the
-| destination.  If the instruction is not move_out, then the
-| destination is not affected.  For 68881 compatibility, the
-| following values should be stored at the destination, based
-| on the current rounding mode:
-|
-|  RN	Infinity with the sign of the intermediate result.
-|  RZ	Largest magnitude number, with the sign of the
-|	intermediate result.
-|  RM   For pos overflow, the largest pos number. For neg overflow,
-|	-infinity
-|  RP   For pos overflow, +infinity. For neg overflow, the largest
-|	neg number
-|
-| Trap enabled results
-| All trap disabled code applies.  In addition the exceptional
-| operand needs to be made available to the users exception handler
-| with a bias of $6000 subtracted from the exponent.
-|
-|
-
-|		Copyright (C) Motorola, Inc. 1990
-|			All Rights Reserved
-|
-|       For details on the license for this file, please see the
-|       file, README, in this same directory.
-
-X_OVFL:	|idnt    2,1 | Motorola 040 Floating Point Software Package
-
-	|section	8
-
-#include "fpsp.h"
-
-	|xref	ovf_r_x2
-	|xref	ovf_r_x3
-	|xref	store
-	|xref	real_ovfl
-	|xref	real_inex
-	|xref	fpsp_done
-	|xref	g_opcls
-	|xref	b1238_fix
-
-	.global	fpsp_ovfl
-fpsp_ovfl:
-	link		%a6,#-LOCAL_SIZE
-	fsave		-(%a7)
-	moveml		%d0-%d1/%a0-%a1,USER_DA(%a6)
-	fmovemx	%fp0-%fp3,USER_FP0(%a6)
-	fmoveml	%fpcr/%fpsr/%fpiar,USER_FPCR(%a6)
-
-|
-|	The 040 doesn't set the AINEX bit in the FPSR, the following
-|	line temporarily rectifies this error.
-|
-	bsetb	#ainex_bit,FPSR_AEXCEPT(%a6)
-|
-	bsrl	ovf_adj		|denormalize, round & store interm op
-|
-|	if overflow traps not enabled check for inexact exception
-|
-	btstb	#ovfl_bit,FPCR_ENABLE(%a6)
-	beqs	ck_inex
-|
-	btstb		#E3,E_BYTE(%a6)
-	beqs		no_e3_1
-	bfextu		CMDREG3B(%a6){#6:#3},%d0	|get dest reg no
-	bclrb		%d0,FPR_DIRTY_BITS(%a6)	|clr dest dirty bit
-	bsrl		b1238_fix
-	movel		USER_FPSR(%a6),FPSR_SHADOW(%a6)
-	orl		#sx_mask,E_BYTE(%a6)
-no_e3_1:
-	moveml		USER_DA(%a6),%d0-%d1/%a0-%a1
-	fmovemx	USER_FP0(%a6),%fp0-%fp3
-	fmoveml	USER_FPCR(%a6),%fpcr/%fpsr/%fpiar
-	frestore	(%a7)+
-	unlk		%a6
-	bral		real_ovfl
-|
-| It is possible to have either inex2 or inex1 exceptions with the
-| ovfl.  If the inex enable bit is set in the FPCR, and either
-| inex2 or inex1 occurred, we must clean up and branch to the
-| real inex handler.
-|
-ck_inex:
-|	move.b		FPCR_ENABLE(%a6),%d0
-|	and.b		FPSR_EXCEPT(%a6),%d0
-|	andi.b		#$3,%d0
-	btstb		#inex2_bit,FPCR_ENABLE(%a6)
-	beqs		ovfl_exit
-|
-| Inexact enabled and reported, and we must take an inexact exception.
-|
-take_inex:
-	btstb		#E3,E_BYTE(%a6)
-	beqs		no_e3_2
-	bfextu		CMDREG3B(%a6){#6:#3},%d0	|get dest reg no
-	bclrb		%d0,FPR_DIRTY_BITS(%a6)	|clr dest dirty bit
-	bsrl		b1238_fix
-	movel		USER_FPSR(%a6),FPSR_SHADOW(%a6)
-	orl		#sx_mask,E_BYTE(%a6)
-no_e3_2:
-	moveb		#INEX_VEC,EXC_VEC+1(%a6)
-	moveml		USER_DA(%a6),%d0-%d1/%a0-%a1
-	fmovemx	USER_FP0(%a6),%fp0-%fp3
-	fmoveml	USER_FPCR(%a6),%fpcr/%fpsr/%fpiar
-	frestore	(%a7)+
-	unlk		%a6
-	bral		real_inex
-
-ovfl_exit:
-	bclrb	#E3,E_BYTE(%a6)	|test and clear E3 bit
-	beqs	e1_set
-|
-| Clear dirty bit on dest resister in the frame before branching
-| to b1238_fix.
-|
-	bfextu		CMDREG3B(%a6){#6:#3},%d0	|get dest reg no
-	bclrb		%d0,FPR_DIRTY_BITS(%a6)	|clr dest dirty bit
-	bsrl		b1238_fix		|test for bug1238 case
-
-	movel		USER_FPSR(%a6),FPSR_SHADOW(%a6)
-	orl		#sx_mask,E_BYTE(%a6)
-	moveml		USER_DA(%a6),%d0-%d1/%a0-%a1
-	fmovemx	USER_FP0(%a6),%fp0-%fp3
-	fmoveml	USER_FPCR(%a6),%fpcr/%fpsr/%fpiar
-	frestore	(%a7)+
-	unlk		%a6
-	bral		fpsp_done
-e1_set:
-	moveml		USER_DA(%a6),%d0-%d1/%a0-%a1
-	fmovemx	USER_FP0(%a6),%fp0-%fp3
-	fmoveml	USER_FPCR(%a6),%fpcr/%fpsr/%fpiar
-	unlk		%a6
-	bral		fpsp_done
-
-|
-|	ovf_adj
-|
-ovf_adj:
-|
-| Have a0 point to the correct operand.
-|
-	btstb	#E3,E_BYTE(%a6)	|test E3 bit
-	beqs	ovf_e1
-
-	lea	WBTEMP(%a6),%a0
-	bras	ovf_com
-ovf_e1:
-	lea	ETEMP(%a6),%a0
-
-ovf_com:
-	bclrb	#sign_bit,LOCAL_EX(%a0)
-	sne	LOCAL_SGN(%a0)
-
-	bsrl	g_opcls		|returns opclass in d0
-	cmpiw	#3,%d0		|check for opclass3
-	bnes	not_opc011
-
-|
-| FPSR_CC is saved and restored because ovf_r_x3 affects it. The
-| CCs are defined to be 'not affected' for the opclass3 instruction.
-|
-	moveb	FPSR_CC(%a6),L_SCR1(%a6)
-	bsrl	ovf_r_x3	|returns a0 pointing to result
-	moveb	L_SCR1(%a6),FPSR_CC(%a6)
-	bral	store		|stores to memory or register
-
-not_opc011:
-	bsrl	ovf_r_x2	|returns a0 pointing to result
-	bral	store		|stores to memory or register
-
-	|end
diff --git a/ANDROID_3.4.5/arch/m68k/fpsp040/x_snan.S b/ANDROID_3.4.5/arch/m68k/fpsp040/x_snan.S
deleted file mode 100644
index 4ed76641..00000000
--- a/ANDROID_3.4.5/arch/m68k/fpsp040/x_snan.S
+++ /dev/null
@@ -1,276 +0,0 @@
-|
-|	x_snan.sa 3.3 7/1/91
-|
-| fpsp_snan --- FPSP handler for signalling NAN exception
-|
-| SNAN for float -> integer conversions (integer conversion of
-| an SNAN) is a non-maskable run-time exception.
-|
-| For trap disabled the 040 does the following:
-| If the dest data format is s, d, or x, then the SNAN bit in the NAN
-| is set to one and the resulting non-signaling NAN (truncated if
-| necessary) is transferred to the dest.  If the dest format is b, w,
-| or l, then garbage is written to the dest (actually the upper 32 bits
-| of the mantissa are sent to the integer unit).
-|
-| For trap enabled the 040 does the following:
-| If the inst is move_out, then the results are the same as for trap
-| disabled with the exception posted.  If the instruction is not move_
-| out, the dest. is not modified, and the exception is posted.
-|
-
-|		Copyright (C) Motorola, Inc. 1990
-|			All Rights Reserved
-|
-|       For details on the license for this file, please see the
-|       file, README, in this same directory.
-
-X_SNAN:	|idnt    2,1 | Motorola 040 Floating Point Software Package
-
-	|section	8
-
-#include "fpsp.h"
-
-	|xref	get_fline
-	|xref	mem_write
-	|xref	real_snan
-	|xref	real_inex
-	|xref	fpsp_done
-	|xref	reg_dest
-
-	.global	fpsp_snan
-fpsp_snan:
-	link		%a6,#-LOCAL_SIZE
-	fsave		-(%a7)
-	moveml		%d0-%d1/%a0-%a1,USER_DA(%a6)
-	fmovemx	%fp0-%fp3,USER_FP0(%a6)
-	fmoveml	%fpcr/%fpsr/%fpiar,USER_FPCR(%a6)
-
-|
-| Check if trap enabled
-|
-	btstb		#snan_bit,FPCR_ENABLE(%a6)
-	bnes		ena		|If enabled, then branch
-
-	bsrl		move_out	|else SNAN disabled
-|
-| It is possible to have an inex1 exception with the
-| snan.  If the inex enable bit is set in the FPCR, and either
-| inex2 or inex1 occurred, we must clean up and branch to the
-| real inex handler.
-|
-ck_inex:
-	moveb	FPCR_ENABLE(%a6),%d0
-	andb	FPSR_EXCEPT(%a6),%d0
-	andib	#0x3,%d0
-	beq	end_snan
-|
-| Inexact enabled and reported, and we must take an inexact exception.
-|
-take_inex:
-	moveb		#INEX_VEC,EXC_VEC+1(%a6)
-	moveml		USER_DA(%a6),%d0-%d1/%a0-%a1
-	fmovemx	USER_FP0(%a6),%fp0-%fp3
-	fmoveml	USER_FPCR(%a6),%fpcr/%fpsr/%fpiar
-	frestore	(%a7)+
-	unlk		%a6
-	bral		real_inex
-|
-| SNAN is enabled.  Check if inst is move_out.
-| Make any corrections to the 040 output as necessary.
-|
-ena:
-	btstb		#5,CMDREG1B(%a6) |if set, inst is move out
-	beq		not_out
-
-	bsrl		move_out
-
-report_snan:
-	moveb		(%a7),VER_TMP(%a6)
-	cmpib		#VER_40,(%a7)	|test for orig unimp frame
-	bnes		ck_rev
-	moveql		#13,%d0		|need to zero 14 lwords
-	bras		rep_con
-ck_rev:
-	moveql		#11,%d0		|need to zero 12 lwords
-rep_con:
-	clrl		(%a7)
-loop1:
-	clrl		-(%a7)		|clear and dec a7
-	dbra		%d0,loop1
-	moveb		VER_TMP(%a6),(%a7) |format a busy frame
-	moveb		#BUSY_SIZE-4,1(%a7)
-	movel		USER_FPSR(%a6),FPSR_SHADOW(%a6)
-	orl		#sx_mask,E_BYTE(%a6)
-	moveml		USER_DA(%a6),%d0-%d1/%a0-%a1
-	fmovemx	USER_FP0(%a6),%fp0-%fp3
-	fmoveml	USER_FPCR(%a6),%fpcr/%fpsr/%fpiar
-	frestore	(%a7)+
-	unlk		%a6
-	bral		real_snan
-|
-| Exit snan handler by expanding the unimp frame into a busy frame
-|
-end_snan:
-	bclrb		#E1,E_BYTE(%a6)
-
-	moveb		(%a7),VER_TMP(%a6)
-	cmpib		#VER_40,(%a7)	|test for orig unimp frame
-	bnes		ck_rev2
-	moveql		#13,%d0		|need to zero 14 lwords
-	bras		rep_con2
-ck_rev2:
-	moveql		#11,%d0		|need to zero 12 lwords
-rep_con2:
-	clrl		(%a7)
-loop2:
-	clrl		-(%a7)		|clear and dec a7
-	dbra		%d0,loop2
-	moveb		VER_TMP(%a6),(%a7) |format a busy frame
-	moveb		#BUSY_SIZE-4,1(%a7) |write busy size
-	movel		USER_FPSR(%a6),FPSR_SHADOW(%a6)
-	orl		#sx_mask,E_BYTE(%a6)
-	moveml		USER_DA(%a6),%d0-%d1/%a0-%a1
-	fmovemx	USER_FP0(%a6),%fp0-%fp3
-	fmoveml	USER_FPCR(%a6),%fpcr/%fpsr/%fpiar
-	frestore	(%a7)+
-	unlk		%a6
-	bral		fpsp_done
-
-|
-| Move_out
-|
-move_out:
-	movel		EXC_EA(%a6),%a0	|get <ea> from exc frame
-
-	bfextu		CMDREG1B(%a6){#3:#3},%d0 |move rx field to d0{2:0}
-	cmpil		#0,%d0		|check for long
-	beqs		sto_long	|branch if move_out long
-
-	cmpil		#4,%d0		|check for word
-	beqs		sto_word	|branch if move_out word
-
-	cmpil		#6,%d0		|check for byte
-	beqs		sto_byte	|branch if move_out byte
-
-|
-| Not byte, word or long
-|
-	rts
-|
-| Get the 32 most significant bits of etemp mantissa
-|
-sto_long:
-	movel		ETEMP_HI(%a6),%d1
-	movel		#4,%d0		|load byte count
-|
-| Set signalling nan bit
-|
-	bsetl		#30,%d1
-|
-| Store to the users destination address
-|
-	tstl		%a0		|check if <ea> is 0
-	beqs		wrt_dn		|destination is a data register
-
-	movel		%d1,-(%a7)	|move the snan onto the stack
-	movel		%a0,%a1		|load dest addr into a1
-	movel		%a7,%a0		|load src addr of snan into a0
-	bsrl		mem_write	|write snan to user memory
-	movel		(%a7)+,%d1	|clear off stack
-	rts
-|
-| Get the 16 most significant bits of etemp mantissa
-|
-sto_word:
-	movel		ETEMP_HI(%a6),%d1
-	movel		#2,%d0		|load byte count
-|
-| Set signalling nan bit
-|
-	bsetl		#30,%d1
-|
-| Store to the users destination address
-|
-	tstl		%a0		|check if <ea> is 0
-	beqs		wrt_dn		|destination is a data register
-
-	movel		%d1,-(%a7)	|move the snan onto the stack
-	movel		%a0,%a1		|load dest addr into a1
-	movel		%a7,%a0		|point to low word
-	bsrl		mem_write	|write snan to user memory
-	movel		(%a7)+,%d1	|clear off stack
-	rts
-|
-| Get the 8 most significant bits of etemp mantissa
-|
-sto_byte:
-	movel		ETEMP_HI(%a6),%d1
-	movel		#1,%d0		|load byte count
-|
-| Set signalling nan bit
-|
-	bsetl		#30,%d1
-|
-| Store to the users destination address
-|
-	tstl		%a0		|check if <ea> is 0
-	beqs		wrt_dn		|destination is a data register
-	movel		%d1,-(%a7)	|move the snan onto the stack
-	movel		%a0,%a1		|load dest addr into a1
-	movel		%a7,%a0		|point to source byte
-	bsrl		mem_write	|write snan to user memory
-	movel		(%a7)+,%d1	|clear off stack
-	rts
-
-|
-|	wrt_dn --- write to a data register
-|
-|	We get here with D1 containing the data to write and D0 the
-|	number of bytes to write: 1=byte,2=word,4=long.
-|
-wrt_dn:
-	movel		%d1,L_SCR1(%a6)	|data
-	movel		%d0,-(%a7)	|size
-	bsrl		get_fline	|returns fline word in d0
-	movel		%d0,%d1
-	andil		#0x7,%d1		|d1 now holds register number
-	movel		(%sp)+,%d0	|get original size
-	cmpil		#4,%d0
-	beqs		wrt_long
-	cmpil		#2,%d0
-	bnes		wrt_byte
-wrt_word:
-	orl		#0x8,%d1
-	bral		reg_dest
-wrt_long:
-	orl		#0x10,%d1
-	bral		reg_dest
-wrt_byte:
-	bral		reg_dest
-|
-| Check if it is a src nan or dst nan
-|
-not_out:
-	movel		DTAG(%a6),%d0
-	bfextu		%d0{#0:#3},%d0	|isolate dtag in lsbs
-
-	cmpib		#3,%d0		|check for nan in destination
-	bnes		issrc		|destination nan has priority
-dst_nan:
-	btstb		#6,FPTEMP_HI(%a6) |check if dest nan is an snan
-	bnes		issrc		|no, so check source for snan
-	movew		FPTEMP_EX(%a6),%d0
-	bras		cont
-issrc:
-	movew		ETEMP_EX(%a6),%d0
-cont:
-	btstl		#15,%d0		|test for sign of snan
-	beqs		clr_neg
-	bsetb		#neg_bit,FPSR_CC(%a6)
-	bra		report_snan
-clr_neg:
-	bclrb		#neg_bit,FPSR_CC(%a6)
-	bra		report_snan
-
-	|end
diff --git a/ANDROID_3.4.5/arch/m68k/fpsp040/x_store.S b/ANDROID_3.4.5/arch/m68k/fpsp040/x_store.S
deleted file mode 100644
index 402dc0c0..00000000
--- a/ANDROID_3.4.5/arch/m68k/fpsp040/x_store.S
+++ /dev/null
@@ -1,255 +0,0 @@
-|
-|	x_store.sa 3.2 1/24/91
-|
-|	store --- store operand to memory or register
-|
-|	Used by underflow and overflow handlers.
-|
-|	a6 = points to fp value to be stored.
-|
-
-|		Copyright (C) Motorola, Inc. 1990
-|			All Rights Reserved
-|
-|       For details on the license for this file, please see the
-|       file, README, in this same directory.
-
-X_STORE:	|idnt    2,1 | Motorola 040 Floating Point Software Package
-
-	|section	8
-
-fpreg_mask:
-	.byte	0x80,0x40,0x20,0x10,0x08,0x04,0x02,0x01
-
-#include "fpsp.h"
-
-	|xref	mem_write
-	|xref	get_fline
-	|xref	g_opcls
-	|xref	g_dfmtou
-	|xref	reg_dest
-
-	.global	dest_ext
-	.global	dest_dbl
-	.global	dest_sgl
-
-	.global	store
-store:
-	btstb	#E3,E_BYTE(%a6)
-	beqs	E1_sto
-E3_sto:
-	movel	CMDREG3B(%a6),%d0
-	bfextu	%d0{#6:#3},%d0		|isolate dest. reg from cmdreg3b
-sto_fp:
-	lea	fpreg_mask,%a1
-	moveb	(%a1,%d0.w),%d0		|convert reg# to dynamic register mask
-	tstb	LOCAL_SGN(%a0)
-	beqs	is_pos
-	bsetb	#sign_bit,LOCAL_EX(%a0)
-is_pos:
-	fmovemx (%a0),%d0		|move to correct register
-|
-|	if fp0-fp3 is being modified, we must put a copy
-|	in the USER_FPn variable on the stack because all exception
-|	handlers restore fp0-fp3 from there.
-|
-	cmpb	#0x80,%d0
-	bnes	not_fp0
-	fmovemx %fp0-%fp0,USER_FP0(%a6)
-	rts
-not_fp0:
-	cmpb	#0x40,%d0
-	bnes	not_fp1
-	fmovemx %fp1-%fp1,USER_FP1(%a6)
-	rts
-not_fp1:
-	cmpb	#0x20,%d0
-	bnes	not_fp2
-	fmovemx %fp2-%fp2,USER_FP2(%a6)
-	rts
-not_fp2:
-	cmpb	#0x10,%d0
-	bnes	not_fp3
-	fmovemx %fp3-%fp3,USER_FP3(%a6)
-	rts
-not_fp3:
-	rts
-
-E1_sto:
-	bsrl	g_opcls		|returns opclass in d0
-	cmpib	#3,%d0
-	beq	opc011		|branch if opclass 3
-	movel	CMDREG1B(%a6),%d0
-	bfextu	%d0{#6:#3},%d0	|extract destination register
-	bras	sto_fp
-
-opc011:
-	bsrl	g_dfmtou	|returns dest format in d0
-|				;ext=00, sgl=01, dbl=10
-	movel	%a0,%a1		|save source addr in a1
-	movel	EXC_EA(%a6),%a0	|get the address
-	cmpil	#0,%d0		|if dest format is extended
-	beq	dest_ext	|then branch
-	cmpil	#1,%d0		|if dest format is single
-	beq	dest_sgl	|then branch
-|
-|	fall through to dest_dbl
-|
-
-|
-|	dest_dbl --- write double precision value to user space
-|
-|Input
-|	a0 -> destination address
-|	a1 -> source in extended precision
-|Output
-|	a0 -> destroyed
-|	a1 -> destroyed
-|	d0 -> 0
-|
-|Changes extended precision to double precision.
-| Note: no attempt is made to round the extended value to double.
-|	dbl_sign = ext_sign
-|	dbl_exp = ext_exp - $3fff(ext bias) + $7ff(dbl bias)
-|	get rid of ext integer bit
-|	dbl_mant = ext_mant{62:12}
-|
-|		---------------   ---------------    ---------------
-|  extended ->  |s|    exp    |   |1| ms mant   |    | ls mant     |
-|		---------------   ---------------    ---------------
-|		 95	    64    63 62	      32      31     11	  0
-|				     |			     |
-|				     |			     |
-|				     |			     |
-|			             v			     v
-|			      ---------------   ---------------
-|  double   ->		      |s|exp| mant  |   |  mant       |
-|			      ---------------   ---------------
-|			      63     51   32   31	       0
-|
-dest_dbl:
-	clrl	%d0		|clear d0
-	movew	LOCAL_EX(%a1),%d0	|get exponent
-	subw	#0x3fff,%d0	|subtract extended precision bias
-	cmpw	#0x4000,%d0	|check if inf
-	beqs	inf		|if so, special case
-	addw	#0x3ff,%d0	|add double precision bias
-	swap	%d0		|d0 now in upper word
-	lsll	#4,%d0		|d0 now in proper place for dbl prec exp
-	tstb	LOCAL_SGN(%a1)
-	beqs	get_mant	|if positive, go process mantissa
-	bsetl	#31,%d0		|if negative, put in sign information
-|				; before continuing
-	bras	get_mant	|go process mantissa
-inf:
-	movel	#0x7ff00000,%d0	|load dbl inf exponent
-	clrl	LOCAL_HI(%a1)	|clear msb
-	tstb	LOCAL_SGN(%a1)
-	beqs	dbl_inf		|if positive, go ahead and write it
-	bsetl	#31,%d0		|if negative put in sign information
-dbl_inf:
-	movel	%d0,LOCAL_EX(%a1)	|put the new exp back on the stack
-	bras	dbl_wrt
-get_mant:
-	movel	LOCAL_HI(%a1),%d1	|get ms mantissa
-	bfextu	%d1{#1:#20},%d1	|get upper 20 bits of ms
-	orl	%d1,%d0		|put these bits in ms word of double
-	movel	%d0,LOCAL_EX(%a1)	|put the new exp back on the stack
-	movel	LOCAL_HI(%a1),%d1	|get ms mantissa
-	movel	#21,%d0		|load shift count
-	lsll	%d0,%d1		|put lower 11 bits in upper bits
-	movel	%d1,LOCAL_HI(%a1)	|build lower lword in memory
-	movel	LOCAL_LO(%a1),%d1	|get ls mantissa
-	bfextu	%d1{#0:#21},%d0	|get ls 21 bits of double
-	orl	%d0,LOCAL_HI(%a1)	|put them in double result
-dbl_wrt:
-	movel	#0x8,%d0		|byte count for double precision number
-	exg	%a0,%a1		|a0=supervisor source, a1=user dest
-	bsrl	mem_write	|move the number to the user's memory
-	rts
-|
-|	dest_sgl --- write single precision value to user space
-|
-|Input
-|	a0 -> destination address
-|	a1 -> source in extended precision
-|
-|Output
-|	a0 -> destroyed
-|	a1 -> destroyed
-|	d0 -> 0
-|
-|Changes extended precision to single precision.
-|	sgl_sign = ext_sign
-|	sgl_exp = ext_exp - $3fff(ext bias) + $7f(sgl bias)
-|	get rid of ext integer bit
-|	sgl_mant = ext_mant{62:12}
-|
-|		---------------   ---------------    ---------------
-|  extended ->  |s|    exp    |   |1| ms mant   |    | ls mant     |
-|		---------------   ---------------    ---------------
-|		 95	    64    63 62	   40 32      31     12	  0
-|				     |	   |
-|				     |	   |
-|				     |	   |
-|			             v     v
-|			      ---------------
-|  single   ->		      |s|exp| mant  |
-|			      ---------------
-|			      31     22     0
-|
-dest_sgl:
-	clrl	%d0
-	movew	LOCAL_EX(%a1),%d0	|get exponent
-	subw	#0x3fff,%d0	|subtract extended precision bias
-	cmpw	#0x4000,%d0	|check if inf
-	beqs	sinf		|if so, special case
-	addw	#0x7f,%d0		|add single precision bias
-	swap	%d0		|put exp in upper word of d0
-	lsll	#7,%d0		|shift it into single exp bits
-	tstb	LOCAL_SGN(%a1)
-	beqs	get_sman	|if positive, continue
-	bsetl	#31,%d0		|if negative, put in sign first
-	bras	get_sman	|get mantissa
-sinf:
-	movel	#0x7f800000,%d0	|load single inf exp to d0
-	tstb	LOCAL_SGN(%a1)
-	beqs	sgl_wrt		|if positive, continue
-	bsetl	#31,%d0		|if negative, put in sign info
-	bras	sgl_wrt
-
-get_sman:
-	movel	LOCAL_HI(%a1),%d1	|get ms mantissa
-	bfextu	%d1{#1:#23},%d1	|get upper 23 bits of ms
-	orl	%d1,%d0		|put these bits in ms word of single
-
-sgl_wrt:
-	movel	%d0,L_SCR1(%a6)	|put the new exp back on the stack
-	movel	#0x4,%d0		|byte count for single precision number
-	tstl	%a0		|users destination address
-	beqs	sgl_Dn		|destination is a data register
-	exg	%a0,%a1		|a0=supervisor source, a1=user dest
-	leal	L_SCR1(%a6),%a0	|point a0 to data
-	bsrl	mem_write	|move the number to the user's memory
-	rts
-sgl_Dn:
-	bsrl	get_fline	|returns fline word in d0
-	andw	#0x7,%d0		|isolate register number
-	movel	%d0,%d1		|d1 has size:reg formatted for reg_dest
-	orl	#0x10,%d1		|reg_dest wants size added to reg#
-	bral	reg_dest	|size is X, rts in reg_dest will
-|				;return to caller of dest_sgl
-
-dest_ext:
-	tstb	LOCAL_SGN(%a1)	|put back sign into exponent word
-	beqs	dstx_cont
-	bsetb	#sign_bit,LOCAL_EX(%a1)
-dstx_cont:
-	clrb	LOCAL_SGN(%a1)	|clear out the sign byte
-
-	movel	#0x0c,%d0		|byte count for extended number
-	exg	%a0,%a1		|a0=supervisor source, a1=user dest
-	bsrl	mem_write	|move the number to the user's memory
-	rts
-
-	|end
diff --git a/ANDROID_3.4.5/arch/m68k/fpsp040/x_unfl.S b/ANDROID_3.4.5/arch/m68k/fpsp040/x_unfl.S
deleted file mode 100644
index eb772ff3..00000000
--- a/ANDROID_3.4.5/arch/m68k/fpsp040/x_unfl.S
+++ /dev/null
@@ -1,268 +0,0 @@
-|
-|	x_unfl.sa 3.4 7/1/91
-|
-|	fpsp_unfl --- FPSP handler for underflow exception
-|
-| Trap disabled results
-|	For 881/2 compatibility, sw must denormalize the intermediate
-| result, then store the result.  Denormalization is accomplished
-| by taking the intermediate result (which is always normalized) and
-| shifting the mantissa right while incrementing the exponent until
-| it is equal to the denormalized exponent for the destination
-| format.  After denormalization, the result is rounded to the
-| destination format.
-|
-| Trap enabled results
-|	All trap disabled code applies.	In addition the exceptional
-| operand needs to made available to the user with a bias of $6000
-| added to the exponent.
-|
-
-|		Copyright (C) Motorola, Inc. 1990
-|			All Rights Reserved
-|
-|       For details on the license for this file, please see the
-|       file, README, in this same directory.
-
-X_UNFL:	|idnt    2,1 | Motorola 040 Floating Point Software Package
-
-	|section	8
-
-#include "fpsp.h"
-
-	|xref	denorm
-	|xref	round
-	|xref	store
-	|xref	g_rndpr
-	|xref	g_opcls
-	|xref	g_dfmtou
-	|xref	real_unfl
-	|xref	real_inex
-	|xref	fpsp_done
-	|xref	b1238_fix
-
-	.global	fpsp_unfl
-fpsp_unfl:
-	link		%a6,#-LOCAL_SIZE
-	fsave		-(%a7)
-	moveml		%d0-%d1/%a0-%a1,USER_DA(%a6)
-	fmovemx	%fp0-%fp3,USER_FP0(%a6)
-	fmoveml	%fpcr/%fpsr/%fpiar,USER_FPCR(%a6)
-
-|
-	bsrl		unf_res	|denormalize, round & store interm op
-|
-| If underflow exceptions are not enabled, check for inexact
-| exception
-|
-	btstb		#unfl_bit,FPCR_ENABLE(%a6)
-	beqs		ck_inex
-
-	btstb		#E3,E_BYTE(%a6)
-	beqs		no_e3_1
-|
-| Clear dirty bit on dest resister in the frame before branching
-| to b1238_fix.
-|
-	bfextu		CMDREG3B(%a6){#6:#3},%d0	|get dest reg no
-	bclrb		%d0,FPR_DIRTY_BITS(%a6)	|clr dest dirty bit
-	bsrl		b1238_fix		|test for bug1238 case
-	movel		USER_FPSR(%a6),FPSR_SHADOW(%a6)
-	orl		#sx_mask,E_BYTE(%a6)
-no_e3_1:
-	moveml		USER_DA(%a6),%d0-%d1/%a0-%a1
-	fmovemx	USER_FP0(%a6),%fp0-%fp3
-	fmoveml	USER_FPCR(%a6),%fpcr/%fpsr/%fpiar
-	frestore	(%a7)+
-	unlk		%a6
-	bral		real_unfl
-|
-| It is possible to have either inex2 or inex1 exceptions with the
-| unfl.  If the inex enable bit is set in the FPCR, and either
-| inex2 or inex1 occurred, we must clean up and branch to the
-| real inex handler.
-|
-ck_inex:
-	moveb		FPCR_ENABLE(%a6),%d0
-	andb		FPSR_EXCEPT(%a6),%d0
-	andib		#0x3,%d0
-	beqs		unfl_done
-
-|
-| Inexact enabled and reported, and we must take an inexact exception
-|
-take_inex:
-	btstb		#E3,E_BYTE(%a6)
-	beqs		no_e3_2
-|
-| Clear dirty bit on dest resister in the frame before branching
-| to b1238_fix.
-|
-	bfextu		CMDREG3B(%a6){#6:#3},%d0	|get dest reg no
-	bclrb		%d0,FPR_DIRTY_BITS(%a6)	|clr dest dirty bit
-	bsrl		b1238_fix		|test for bug1238 case
-	movel		USER_FPSR(%a6),FPSR_SHADOW(%a6)
-	orl		#sx_mask,E_BYTE(%a6)
-no_e3_2:
-	moveb		#INEX_VEC,EXC_VEC+1(%a6)
-	moveml         USER_DA(%a6),%d0-%d1/%a0-%a1
-	fmovemx        USER_FP0(%a6),%fp0-%fp3
-	fmoveml        USER_FPCR(%a6),%fpcr/%fpsr/%fpiar
-	frestore        (%a7)+
-	unlk            %a6
-	bral		real_inex
-
-unfl_done:
-	bclrb		#E3,E_BYTE(%a6)
-	beqs		e1_set		|if set then branch
-|
-| Clear dirty bit on dest resister in the frame before branching
-| to b1238_fix.
-|
-	bfextu		CMDREG3B(%a6){#6:#3},%d0		|get dest reg no
-	bclrb		%d0,FPR_DIRTY_BITS(%a6)	|clr dest dirty bit
-	bsrl		b1238_fix		|test for bug1238 case
-	movel		USER_FPSR(%a6),FPSR_SHADOW(%a6)
-	orl		#sx_mask,E_BYTE(%a6)
-	moveml		USER_DA(%a6),%d0-%d1/%a0-%a1
-	fmovemx	USER_FP0(%a6),%fp0-%fp3
-	fmoveml	USER_FPCR(%a6),%fpcr/%fpsr/%fpiar
-	frestore	(%a7)+
-	unlk		%a6
-	bral		fpsp_done
-e1_set:
-	moveml		USER_DA(%a6),%d0-%d1/%a0-%a1
-	fmovemx	USER_FP0(%a6),%fp0-%fp3
-	fmoveml	USER_FPCR(%a6),%fpcr/%fpsr/%fpiar
-	unlk		%a6
-	bral		fpsp_done
-|
-|	unf_res --- underflow result calculation
-|
-unf_res:
-	bsrl		g_rndpr		|returns RND_PREC in d0 0=ext,
-|					;1=sgl, 2=dbl
-|					;we need the RND_PREC in the
-|					;upper word for round
-	movew		#0,-(%a7)
-	movew		%d0,-(%a7)	|copy RND_PREC to stack
-|
-|
-| If the exception bit set is E3, the exceptional operand from the
-| fpu is in WBTEMP; else it is in FPTEMP.
-|
-	btstb		#E3,E_BYTE(%a6)
-	beqs		unf_E1
-unf_E3:
-	lea		WBTEMP(%a6),%a0	|a0 now points to operand
-|
-| Test for fsgldiv and fsglmul.  If the inst was one of these, then
-| force the precision to extended for the denorm routine.  Use
-| the user's precision for the round routine.
-|
-	movew		CMDREG3B(%a6),%d1	|check for fsgldiv or fsglmul
-	andiw		#0x7f,%d1
-	cmpiw		#0x30,%d1		|check for sgldiv
-	beqs		unf_sgl
-	cmpiw		#0x33,%d1		|check for sglmul
-	bnes		unf_cont	|if not, use fpcr prec in round
-unf_sgl:
-	clrl		%d0
-	movew		#0x1,(%a7)	|override g_rndpr precision
-|					;force single
-	bras		unf_cont
-unf_E1:
-	lea		FPTEMP(%a6),%a0	|a0 now points to operand
-unf_cont:
-	bclrb		#sign_bit,LOCAL_EX(%a0)	|clear sign bit
-	sne		LOCAL_SGN(%a0)		|store sign
-
-	bsrl		denorm		|returns denorm, a0 points to it
-|
-| WARNING:
-|				;d0 has guard,round sticky bit
-|				;make sure that it is not corrupted
-|				;before it reaches the round subroutine
-|				;also ensure that a0 isn't corrupted
-
-|
-| Set up d1 for round subroutine d1 contains the PREC/MODE
-| information respectively on upper/lower register halves.
-|
-	bfextu		FPCR_MODE(%a6){#2:#2},%d1	|get mode from FPCR
-|						;mode in lower d1
-	addl		(%a7)+,%d1		|merge PREC/MODE
-|
-| WARNING: a0 and d0 are assumed to be intact between the denorm and
-| round subroutines. All code between these two subroutines
-| must not corrupt a0 and d0.
-|
-|
-| Perform Round
-|	Input:		a0 points to input operand
-|			d0{31:29} has guard, round, sticky
-|			d1{01:00} has rounding mode
-|			d1{17:16} has rounding precision
-|	Output:		a0 points to rounded operand
-|
-
-	bsrl		round		|returns rounded denorm at (a0)
-|
-| Differentiate between store to memory vs. store to register
-|
-unf_store:
-	bsrl		g_opcls		|returns opclass in d0{2:0}
-	cmpib		#0x3,%d0
-	bnes		not_opc011
-|
-| At this point, a store to memory is pending
-|
-opc011:
-	bsrl		g_dfmtou
-	tstb		%d0
-	beqs		ext_opc011	|If extended, do not subtract
-|				;If destination format is sgl/dbl,
-	tstb		LOCAL_HI(%a0)	|If rounded result is normal,don't
-|					;subtract
-	bmis		ext_opc011
-	subqw		#1,LOCAL_EX(%a0)	|account for denorm bias vs.
-|				;normalized bias
-|				;          normalized   denormalized
-|				;single       $7f           $7e
-|				;double       $3ff          $3fe
-|
-ext_opc011:
-	bsrl		store		|stores to memory
-	bras		unf_done	|finish up
-
-|
-| At this point, a store to a float register is pending
-|
-not_opc011:
-	bsrl		store	|stores to float register
-|				;a0 is not corrupted on a store to a
-|				;float register.
-|
-| Set the condition codes according to result
-|
-	tstl		LOCAL_HI(%a0)	|check upper mantissa
-	bnes		ck_sgn
-	tstl		LOCAL_LO(%a0)	|check lower mantissa
-	bnes		ck_sgn
-	bsetb		#z_bit,FPSR_CC(%a6) |set condition codes if zero
-ck_sgn:
-	btstb		#sign_bit,LOCAL_EX(%a0)	|check the sign bit
-	beqs		unf_done
-	bsetb		#neg_bit,FPSR_CC(%a6)
-
-|
-| Finish.
-|
-unf_done:
-	btstb		#inex2_bit,FPSR_EXCEPT(%a6)
-	beqs		no_aunfl
-	bsetb		#aunfl_bit,FPSR_AEXCEPT(%a6)
-no_aunfl:
-	rts
-
-	|end
diff --git a/ANDROID_3.4.5/arch/m68k/fpsp040/x_unimp.S b/ANDROID_3.4.5/arch/m68k/fpsp040/x_unimp.S
deleted file mode 100644
index 6f382b21..00000000
--- a/ANDROID_3.4.5/arch/m68k/fpsp040/x_unimp.S
+++ /dev/null
@@ -1,76 +0,0 @@
-|
-|	x_unimp.sa 3.3 7/1/91
-|
-|	fpsp_unimp --- FPSP handler for unimplemented instruction
-|	exception.
-|
-| Invoked when the user program encounters a floating-point
-| op-code that hardware does not support.  Trap vector# 11
-| (See table 8-1 MC68030 User's Manual).
-|
-|
-| Note: An fsave for an unimplemented inst. will create a short
-| fsave stack.
-|
-|  Input: 1. Six word stack frame for unimplemented inst, four word
-|            for illegal
-|            (See table 8-7 MC68030 User's Manual).
-|         2. Unimp (short) fsave state frame created here by fsave
-|            instruction.
-|
-|
-|		Copyright (C) Motorola, Inc. 1990
-|			All Rights Reserved
-|
-|       For details on the license for this file, please see the
-|       file, README, in this same directory.
-
-X_UNIMP:	|idnt    2,1 | Motorola 040 Floating Point Software Package
-
-	|section	8
-
-#include "fpsp.h"
-
-	|xref	get_op
-	|xref	do_func
-	|xref	sto_res
-	|xref	gen_except
-	|xref	fpsp_fmt_error
-
-	.global	fpsp_unimp
-	.global	uni_2
-fpsp_unimp:
-	link		%a6,#-LOCAL_SIZE
-	fsave		-(%a7)
-uni_2:
-	moveml		%d0-%d1/%a0-%a1,USER_DA(%a6)
-	fmovemx	%fp0-%fp3,USER_FP0(%a6)
-	fmoveml	%fpcr/%fpsr/%fpiar,USER_FPCR(%a6)
-	moveb		(%a7),%d0		|test for valid version num
-	andib		#0xf0,%d0		|test for $4x
-	cmpib		#VER_4,%d0	|must be $4x or exit
-	bnel		fpsp_fmt_error
-|
-|	Temporary D25B Fix
-|	The following lines are used to ensure that the FPSR
-|	exception byte and condition codes are clear before proceeding
-|
-	movel		USER_FPSR(%a6),%d0
-	andl		#0xFF00FF,%d0	|clear all but accrued exceptions
-	movel		%d0,USER_FPSR(%a6)
-	fmovel		#0,%FPSR |clear all user bits
-	fmovel		#0,%FPCR	|clear all user exceptions for FPSP
-
-	clrb		UFLG_TMP(%a6)	|clr flag for unsupp data
-
-	bsrl		get_op		|go get operand(s)
-	clrb		STORE_FLG(%a6)
-	bsrl		do_func		|do the function
-	fsave		-(%a7)		|capture possible exc state
-	tstb		STORE_FLG(%a6)
-	bnes		no_store	|if STORE_FLG is set, no store
-	bsrl		sto_res		|store the result in user space
-no_store:
-	bral		gen_except	|post any exceptions and return
-
-	|end
diff --git a/ANDROID_3.4.5/arch/m68k/fpsp040/x_unsupp.S b/ANDROID_3.4.5/arch/m68k/fpsp040/x_unsupp.S
deleted file mode 100644
index d7cf4620..00000000
--- a/ANDROID_3.4.5/arch/m68k/fpsp040/x_unsupp.S
+++ /dev/null
@@ -1,82 +0,0 @@
-|
-|	x_unsupp.sa 3.3 7/1/91
-|
-|	fpsp_unsupp --- FPSP handler for unsupported data type exception
-|
-| Trap vector #55	(See table 8-1 Mc68030 User's manual).
-| Invoked when the user program encounters a data format (packed) that
-| hardware does not support or a data type (denormalized numbers or un-
-| normalized numbers).
-| Normalizes denorms and unnorms, unpacks packed numbers then stores
-| them back into the machine to let the 040 finish the operation.
-|
-| Unsupp calls two routines:
-|	1. get_op -  gets the operand(s)
-|	2. res_func - restore the function back into the 040 or
-|			if fmove.p fpm,<ea> then pack source (fpm)
-|			and store in users memory <ea>.
-|
-|  Input: Long fsave stack frame
-|
-|
-
-|		Copyright (C) Motorola, Inc. 1990
-|			All Rights Reserved
-|
-|       For details on the license for this file, please see the
-|       file, README, in this same directory.
-
-X_UNSUPP:	|idnt    2,1 | Motorola 040 Floating Point Software Package
-
-	|section	8
-
-#include "fpsp.h"
-
-	|xref	get_op
-	|xref	res_func
-	|xref	gen_except
-	|xref	fpsp_fmt_error
-
-	.global	fpsp_unsupp
-fpsp_unsupp:
-|
-	link		%a6,#-LOCAL_SIZE
-	fsave		-(%a7)
-	moveml		%d0-%d1/%a0-%a1,USER_DA(%a6)
-	fmovemx	%fp0-%fp3,USER_FP0(%a6)
-	fmoveml	%fpcr/%fpsr/%fpiar,USER_FPCR(%a6)
-
-
-	moveb		(%a7),VER_TMP(%a6) |save version number
-	moveb		(%a7),%d0		|test for valid version num
-	andib		#0xf0,%d0		|test for $4x
-	cmpib		#VER_4,%d0	|must be $4x or exit
-	bnel		fpsp_fmt_error
-
-	fmovel		#0,%FPSR		|clear all user status bits
-	fmovel		#0,%FPCR		|clear all user control bits
-|
-|	The following lines are used to ensure that the FPSR
-|	exception byte and condition codes are clear before proceeding,
-|	except in the case of fmove, which leaves the cc's intact.
-|
-unsupp_con:
-	movel		USER_FPSR(%a6),%d1
-	btst		#5,CMDREG1B(%a6)	|looking for fmove out
-	bne		fmove_con
-	andl		#0xFF00FF,%d1	|clear all but aexcs and qbyte
-	bras		end_fix
-fmove_con:
-	andl		#0x0FFF40FF,%d1	|clear all but cc's, snan bit, aexcs, and qbyte
-end_fix:
-	movel		%d1,USER_FPSR(%a6)
-
-	st		UFLG_TMP(%a6)	|set flag for unsupp data
-
-	bsrl		get_op		|everything okay, go get operand(s)
-	bsrl		res_func	|fix up stack frame so can restore it
-	clrl		-(%a7)
-	moveb		VER_TMP(%a6),(%a7) |move idle fmt word to top of stack
-	bral		gen_except
-|
-	|end
diff --git a/ANDROID_3.4.5/arch/m68k/hp300/Makefile b/ANDROID_3.4.5/arch/m68k/hp300/Makefile
deleted file mode 100644
index 96d4244c..00000000
--- a/ANDROID_3.4.5/arch/m68k/hp300/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-#
-# Makefile for Linux arch/m68k/hp300 source directory
-#
-
-obj-y		:= config.o time.o reboot.o
diff --git a/ANDROID_3.4.5/arch/m68k/hp300/README.hp300 b/ANDROID_3.4.5/arch/m68k/hp300/README.hp300
deleted file mode 100644
index 47073fbd..00000000
--- a/ANDROID_3.4.5/arch/m68k/hp300/README.hp300
+++ /dev/null
@@ -1,14 +0,0 @@
-HP300 notes
------------
-
-The Linux/HP web page is at <http://www.tazenda.demon.co.uk/phil/linux-hp/>
-
-Currently only 9000/340 machines have been tested.  Any amount of RAM should
-work now but I've only tried 16MB and 12MB.
-
-The serial console is probably broken at the moment but the Topcat/HIL keyboard
-combination seems to work for me.  Your mileage may vary.
-
-The LANCE driver works after a fashion but only if you reset the chip before
-every packet.  This doesn't make for very speedy operation.
-
diff --git a/ANDROID_3.4.5/arch/m68k/hp300/config.c b/ANDROID_3.4.5/arch/m68k/hp300/config.c
deleted file mode 100644
index bf16af1e..00000000
--- a/ANDROID_3.4.5/arch/m68k/hp300/config.c
+++ /dev/null
@@ -1,273 +0,0 @@
-/*
- *  linux/arch/m68k/hp300/config.c
- *
- *  Copyright (C) 1998 Philip Blundell <philb@gnu.org>
- *
- *  This file contains the HP300-specific initialisation code.  It gets
- *  called by setup.c.
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/string.h>
-#include <linux/kernel.h>
-#include <linux/console.h>
-
-#include <asm/bootinfo.h>
-#include <asm/machdep.h>
-#include <asm/blinken.h>
-#include <asm/io.h>                               /* readb() and writeb() */
-#include <asm/hp300hw.h>
-#include <asm/rtc.h>
-
-#include "time.h"
-
-unsigned long hp300_model;
-unsigned long hp300_uart_scode = -1;
-unsigned char hp300_ledstate;
-EXPORT_SYMBOL(hp300_ledstate);
-
-static char s_hp330[] __initdata = "330";
-static char s_hp340[] __initdata = "340";
-static char s_hp345[] __initdata = "345";
-static char s_hp360[] __initdata = "360";
-static char s_hp370[] __initdata = "370";
-static char s_hp375[] __initdata = "375";
-static char s_hp380[] __initdata = "380";
-static char s_hp385[] __initdata = "385";
-static char s_hp400[] __initdata = "400";
-static char s_hp425t[] __initdata = "425t";
-static char s_hp425s[] __initdata = "425s";
-static char s_hp425e[] __initdata = "425e";
-static char s_hp433t[] __initdata = "433t";
-static char s_hp433s[] __initdata = "433s";
-static char *hp300_models[] __initdata = {
-	[HP_320]	= NULL,
-	[HP_330]	= s_hp330,
-	[HP_340]	= s_hp340,
-	[HP_345]	= s_hp345,
-	[HP_350]	= NULL,
-	[HP_360]	= s_hp360,
-	[HP_370]	= s_hp370,
-	[HP_375]	= s_hp375,
-	[HP_380]	= s_hp380,
-	[HP_385]	= s_hp385,
-	[HP_400]	= s_hp400,
-	[HP_425T]	= s_hp425t,
-	[HP_425S]	= s_hp425s,
-	[HP_425E]	= s_hp425e,
-	[HP_433T]	= s_hp433t,
-	[HP_433S]	= s_hp433s,
-};
-
-static char hp300_model_name[13] = "HP9000/";
-
-extern void hp300_reset(void);
-#ifdef CONFIG_SERIAL_8250_CONSOLE
-extern int hp300_setup_serial_console(void) __init;
-#endif
-
-int __init hp300_parse_bootinfo(const struct bi_record *record)
-{
-	int unknown = 0;
-	const unsigned long *data = record->data;
-
-	switch (record->tag) {
-	case BI_HP300_MODEL:
-		hp300_model = *data;
-		break;
-
-	case BI_HP300_UART_SCODE:
-		hp300_uart_scode = *data;
-		break;
-
-	case BI_HP300_UART_ADDR:
-		/* serial port address: ignored here */
-		break;
-
-        default:
-		unknown = 1;
-	}
-
-	return unknown;
-}
-
-#ifdef CONFIG_HEARTBEAT
-static void hp300_pulse(int x)
-{
-	if (x)
-		blinken_leds(0x10, 0);
-	else
-		blinken_leds(0, 0x10);
-}
-#endif
-
-static void hp300_get_model(char *model)
-{
-	strcpy(model, hp300_model_name);
-}
-
-#define RTCBASE			0xf0420000
-#define RTC_DATA		0x1
-#define RTC_CMD			0x3
-
-#define	RTC_BUSY		0x02
-#define	RTC_DATA_RDY		0x01
-
-#define rtc_busy()		(in_8(RTCBASE + RTC_CMD) & RTC_BUSY)
-#define rtc_data_available()	(in_8(RTCBASE + RTC_CMD) & RTC_DATA_RDY)
-#define rtc_status()		(in_8(RTCBASE + RTC_CMD))
-#define rtc_command(x)		out_8(RTCBASE + RTC_CMD, (x))
-#define rtc_read_data()		(in_8(RTCBASE + RTC_DATA))
-#define rtc_write_data(x)	out_8(RTCBASE + RTC_DATA, (x))
-
-#define RTC_SETREG	0xe0
-#define RTC_WRITEREG	0xc2
-#define RTC_READREG	0xc3
-
-#define RTC_REG_SEC2	0
-#define RTC_REG_SEC1	1
-#define RTC_REG_MIN2	2
-#define RTC_REG_MIN1	3
-#define RTC_REG_HOUR2	4
-#define RTC_REG_HOUR1	5
-#define RTC_REG_WDAY	6
-#define RTC_REG_DAY2	7
-#define RTC_REG_DAY1	8
-#define RTC_REG_MON2	9
-#define RTC_REG_MON1	10
-#define RTC_REG_YEAR2	11
-#define RTC_REG_YEAR1	12
-
-#define RTC_HOUR1_24HMODE 0x8
-
-#define RTC_STAT_MASK	0xf0
-#define RTC_STAT_RDY	0x40
-
-static inline unsigned char hp300_rtc_read(unsigned char reg)
-{
-	unsigned char s, ret;
-	unsigned long flags;
-
-	local_irq_save(flags);
-
-	while (rtc_busy());
-	rtc_command(RTC_SETREG);
-	while (rtc_busy());
-	rtc_write_data(reg);
-	while (rtc_busy());
-	rtc_command(RTC_READREG);
-
-	do {
-		while (!rtc_data_available());
-		s = rtc_status();
-		ret = rtc_read_data();
-	} while ((s & RTC_STAT_MASK) != RTC_STAT_RDY);
-
-	local_irq_restore(flags);
-
-	return ret;
-}
-
-static inline unsigned char hp300_rtc_write(unsigned char reg,
-					    unsigned char val)
-{
-	unsigned char s, ret;
-	unsigned long flags;
-
-	local_irq_save(flags);
-
-	while (rtc_busy());
-	rtc_command(RTC_SETREG);
-	while (rtc_busy());
-	rtc_write_data((val << 4) | reg);
-	while (rtc_busy());
-	rtc_command(RTC_WRITEREG);
-	while (rtc_busy());
-	rtc_command(RTC_READREG);
-
-	do {
-		while (!rtc_data_available());
-		s = rtc_status();
-		ret = rtc_read_data();
-	} while ((s & RTC_STAT_MASK) != RTC_STAT_RDY);
-
-	local_irq_restore(flags);
-
-	return ret;
-}
-
-static int hp300_hwclk(int op, struct rtc_time *t)
-{
-	if (!op) { /* read */
-		t->tm_sec  = hp300_rtc_read(RTC_REG_SEC1) * 10 +
-			hp300_rtc_read(RTC_REG_SEC2);
-		t->tm_min  = hp300_rtc_read(RTC_REG_MIN1) * 10 +
-			hp300_rtc_read(RTC_REG_MIN2);
-		t->tm_hour = (hp300_rtc_read(RTC_REG_HOUR1) & 3) * 10 +
-			hp300_rtc_read(RTC_REG_HOUR2);
-		t->tm_wday = -1;
-		t->tm_mday = hp300_rtc_read(RTC_REG_DAY1) * 10 +
-			hp300_rtc_read(RTC_REG_DAY2);
-		t->tm_mon  = hp300_rtc_read(RTC_REG_MON1) * 10 +
-			hp300_rtc_read(RTC_REG_MON2) - 1;
-		t->tm_year = hp300_rtc_read(RTC_REG_YEAR1) * 10 +
-			hp300_rtc_read(RTC_REG_YEAR2);
-		if (t->tm_year <= 69)
-			t->tm_year += 100;
-	} else {
-		hp300_rtc_write(RTC_REG_SEC1, t->tm_sec / 10);
-		hp300_rtc_write(RTC_REG_SEC2, t->tm_sec % 10);
-		hp300_rtc_write(RTC_REG_MIN1, t->tm_min / 10);
-		hp300_rtc_write(RTC_REG_MIN2, t->tm_min % 10);
-		hp300_rtc_write(RTC_REG_HOUR1,
-				((t->tm_hour / 10) & 3) | RTC_HOUR1_24HMODE);
-		hp300_rtc_write(RTC_REG_HOUR2, t->tm_hour % 10);
-		hp300_rtc_write(RTC_REG_DAY1, t->tm_mday / 10);
-		hp300_rtc_write(RTC_REG_DAY2, t->tm_mday % 10);
-		hp300_rtc_write(RTC_REG_MON1, (t->tm_mon + 1) / 10);
-		hp300_rtc_write(RTC_REG_MON2, (t->tm_mon + 1) % 10);
-		if (t->tm_year >= 100)
-			t->tm_year -= 100;
-		hp300_rtc_write(RTC_REG_YEAR1, t->tm_year / 10);
-		hp300_rtc_write(RTC_REG_YEAR2, t->tm_year % 10);
-	}
-
-	return 0;
-}
-
-static unsigned int hp300_get_ss(void)
-{
-	return hp300_rtc_read(RTC_REG_SEC1) * 10 +
-		hp300_rtc_read(RTC_REG_SEC2);
-}
-
-static void __init hp300_init_IRQ(void)
-{
-}
-
-void __init config_hp300(void)
-{
-	mach_sched_init      = hp300_sched_init;
-	mach_init_IRQ        = hp300_init_IRQ;
-	mach_get_model       = hp300_get_model;
-	mach_gettimeoffset   = hp300_gettimeoffset;
-	mach_hwclk	     = hp300_hwclk;
-	mach_get_ss	     = hp300_get_ss;
-	mach_reset           = hp300_reset;
-#ifdef CONFIG_HEARTBEAT
-	mach_heartbeat       = hp300_pulse;
-#endif
-	mach_max_dma_address = 0xffffffff;
-
-	if (hp300_model >= HP_330 && hp300_model <= HP_433S && hp300_model != HP_350) {
-		printk(KERN_INFO "Detected HP9000 model %s\n", hp300_models[hp300_model-HP_320]);
-		strcat(hp300_model_name, hp300_models[hp300_model-HP_320]);
-	}
-	else {
-		panic("Unknown HP9000 Model");
-	}
-#ifdef CONFIG_SERIAL_8250_CONSOLE
-	hp300_setup_serial_console();
-#endif
-}
diff --git a/ANDROID_3.4.5/arch/m68k/hp300/hp300map.map b/ANDROID_3.4.5/arch/m68k/hp300/hp300map.map
deleted file mode 100644
index 6b45f0ab..00000000
--- a/ANDROID_3.4.5/arch/m68k/hp300/hp300map.map
+++ /dev/null
@@ -1,252 +0,0 @@
-# HP300 kernel keymap. This uses 7 modifier combinations.
-keymaps 0-2,4-5,8,12
-# Change the above line into
-#	keymaps 0-2,4-6,8,12
-# in case you want the entries
-#	altgr   control keycode  83 = Boot
-#	altgr   control keycode 111 = Boot
-# below.
-#
-# In fact AltGr is used very little, and one more keymap can
-# be saved by mapping AltGr to Alt (and adapting a few entries):
-# keycode 100 = Alt
-#
-keycode   1 =
-keycode   2 = Alt
-keycode   3 = Alt
-keycode   4 = Shift
-keycode   5 = Shift
-keycode   6 = Control
-keycode   7 =
-keycode   8 =
-keycode   9 =
-keycode  10 =
-keycode  11 =
-keycode  12 =
-keycode  13 =
-keycode  14 =
-keycode  15 =
-keycode  16 =
-keycode  17 =
-keycode  18 =
-keycode  19 =
-keycode  20 =
-keycode  21 =
-keycode  22 =
-keycode  23 =
-keycode  24 = b
-keycode  25 = v
-keycode  26 = c
-keycode  27 = x
-keycode  28 = z
-keycode  29 =
-keycode  30 =
-keycode  31 = Escape		Delete
-keycode  32 =
-keycode  33 =
-keycode  34 =
-keycode  35 =
-keycode  36 =
-keycode  37 =
-keycode  38 =
-keycode  39 =
-keycode  40 = h
-keycode  41 = g
-keycode  42 = f
-keycode  43 = d
-keycode  44 = s
-keycode  45 = a
-keycode  46 =
-keycode  47 = Caps_Lock
-keycode  48 = u
-keycode  49 = y
-keycode  50 = t
-keycode  51 = r
-keycode  52 = e
-keycode  53 = w
-keycode  54 = q
-keycode  55 = Tab		Tab
-	alt     keycode    55 = Meta_Tab
-keycode  56 = seven		ampersand
-keycode  57 = six		asciicircum
-keycode  58 = five		percent
-keycode  59 = four		dollar
-keycode  60 = three		numbersign
-keycode  61 = two		at		at
-keycode  62 = one		exclam		exclam
-keycode  63 = grave		asciitilde
-	control keycode    63 = nul
-	alt     keycode    63 = Meta_grave
-keycode  64 =
-keycode  65 =
-keycode  66 =
-keycode  67 =
-keycode  68 =
-keycode  69 =
-keycode  70 =
-keycode  71 =
-keycode  72 =
-keycode  73 = F4
-	control keycode	   73 = Console_4
-keycode  74 = F3
-	control keycode	   74 = Console_3
-keycode  75 = F2
-	control keycode	   75 = Console_2
-keycode  76 = F1
-	control keycode	   76 = Console_1
-keycode  77 =
-keycode  78 =
-keycode  79 =
-keycode  80 =
-keycode  81 = F5
-	control keycode	   81 = Console_5
-keycode  82 = F6
-	control keycode	   82 = Console_6
-keycode  83 = F7
-	control keycode	   83 = Console_7
-keycode  84 = F8
-	control keycode	   84 = Console_8
-keycode  85 =
-keycode  86 =
-keycode  87 =
-keycode  88 = eight		asterisk	asterisk
-keycode  89 = nine		parenleft	bracketleft
-keycode  90 = zero		parenright	bracketright
-keycode  91 = minus		underscore
-keycode  92 = equal		plus
-keycode  93 = BackSpace
-keycode  94 =
-keycode  95 =
-keycode  96 = i
-keycode  97 = o
-keycode  98 = p
-keycode  99 = bracketleft	braceleft
-keycode 100 = bracketright	braceright
-keycode 101 = backslash		bar
-	control keycode   101 = Control_backslash
-	alt     keycode   101 = Meta_backslash
-keycode 102 =
-keycode 103 =
-keycode 104 = j
-keycode 105 = k
-keycode 106 = l
-keycode 107 = semicolon		colon
-	alt     keycode   107 = Meta_semicolon
-keycode 108 = apostrophe	quotedbl
-	control keycode   108 = Control_g
-	alt     keycode   108 = Meta_apostrophe
-keycode 109 = Return
-keycode 110 =
-keycode 111 =
-keycode 112 = m
-keycode 113 = comma		less
-keycode 114 = period		greater
-keycode 115 = slash		question
-keycode 116 =
-keycode 117 =
-keycode 118 =
-keycode 119 =
-keycode 120 = n
-keycode 121 = space		space
-keycode 122 =
-keycode 123 =
-keycode 124 = Left
-keycode 125 = Down
-keycode 126 = Up
-keycode 127 = Right
-string F1 = "\033[[A"
-string F2 = "\033[[B"
-string F3 = "\033[[C"
-string F4 = "\033[[D"
-string F5 = "\033[[E"
-string F6 = "\033[17~"
-string F7 = "\033[18~"
-string F8 = "\033[19~"
-string F9 = "\033[20~"
-string F10 = "\033[21~"
-string F11 = "\033[23~"
-string F12 = "\033[24~"
-string F13 = "\033[25~"
-string F14 = "\033[26~"
-string F15 = "\033[28~"
-string F16 = "\033[29~"
-string F17 = "\033[31~"
-string F18 = "\033[32~"
-string F19 = "\033[33~"
-string F20 = "\033[34~"
-string Find = "\033[1~"
-string Insert = "\033[2~"
-string Remove = "\033[3~"
-string Select = "\033[4~"
-string Prior = "\033[5~"
-string Next = "\033[6~"
-string Macro = "\033[M"
-string Pause = "\033[P"
-compose '`' 'A' to 'À'
-compose '`' 'a' to 'à'
-compose '\'' 'A' to 'Á'
-compose '\'' 'a' to 'á'
-compose '^' 'A' to 'Â'
-compose '^' 'a' to 'â'
-compose '~' 'A' to 'Ã'
-compose '~' 'a' to 'ã'
-compose '"' 'A' to 'Ä'
-compose '"' 'a' to 'ä'
-compose 'O' 'A' to 'Å'
-compose 'o' 'a' to 'å'
-compose '0' 'A' to 'Å'
-compose '0' 'a' to 'å'
-compose 'A' 'A' to 'Å'
-compose 'a' 'a' to 'å'
-compose 'A' 'E' to 'Æ'
-compose 'a' 'e' to 'æ'
-compose ',' 'C' to 'Ç'
-compose ',' 'c' to 'ç'
-compose '`' 'E' to 'È'
-compose '`' 'e' to 'è'
-compose '\'' 'E' to 'É'
-compose '\'' 'e' to 'é'
-compose '^' 'E' to 'Ê'
-compose '^' 'e' to 'ê'
-compose '"' 'E' to 'Ë'
-compose '"' 'e' to 'ë'
-compose '`' 'I' to 'Ì'
-compose '`' 'i' to 'ì'
-compose '\'' 'I' to 'Í'
-compose '\'' 'i' to 'í'
-compose '^' 'I' to 'Î'
-compose '^' 'i' to 'î'
-compose '"' 'I' to 'Ï'
-compose '"' 'i' to 'ï'
-compose '-' 'D' to 'Ð'
-compose '-' 'd' to 'ð'
-compose '~' 'N' to 'Ñ'
-compose '~' 'n' to 'ñ'
-compose '`' 'O' to 'Ò'
-compose '`' 'o' to 'ò'
-compose '\'' 'O' to 'Ó'
-compose '\'' 'o' to 'ó'
-compose '^' 'O' to 'Ô'
-compose '^' 'o' to 'ô'
-compose '~' 'O' to 'Õ'
-compose '~' 'o' to 'õ'
-compose '"' 'O' to 'Ö'
-compose '"' 'o' to 'ö'
-compose '/' 'O' to 'Ø'
-compose '/' 'o' to 'ø'
-compose '`' 'U' to 'Ù'
-compose '`' 'u' to 'ù'
-compose '\'' 'U' to 'Ú'
-compose '\'' 'u' to 'ú'
-compose '^' 'U' to 'Û'
-compose '^' 'u' to 'û'
-compose '"' 'U' to 'Ü'
-compose '"' 'u' to 'ü'
-compose '\'' 'Y' to 'Ý'
-compose '\'' 'y' to 'ý'
-compose 'T' 'H' to 'Þ'
-compose 't' 'h' to 'þ'
-compose 's' 's' to 'ß'
-compose '"' 'y' to 'ÿ'
-compose 's' 'z' to 'ß'
-compose 'i' 'j' to 'ÿ'
diff --git a/ANDROID_3.4.5/arch/m68k/hp300/reboot.S b/ANDROID_3.4.5/arch/m68k/hp300/reboot.S
deleted file mode 100644
index 52eb852e..00000000
--- a/ANDROID_3.4.5/arch/m68k/hp300/reboot.S
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- *  linux/arch/m68k/hp300/reboot.S
- *
- *  Copyright (C) 1998 Philip Blundell <philb@gnu.org>
- *
- *  Do the dirty work of rebooting the machine.  Basically we need to undo all the
- *  good stuff that head.S did when we started up.  The caches and MMU must be
- *  disabled and then we jump back to the PROM.  This is a bit gruesome but we put
- *  a brave face on it.
- */
-
-/* XXX Doesn't work yet.  Not sure why and can't be bothered to fix it at the moment. */
-
-	.globl	hp300_reset
-hp300_reset:
-	jmp	hp300_reset
diff --git a/ANDROID_3.4.5/arch/m68k/hp300/time.c b/ANDROID_3.4.5/arch/m68k/hp300/time.c
deleted file mode 100644
index 29a71be9..00000000
--- a/ANDROID_3.4.5/arch/m68k/hp300/time.c
+++ /dev/null
@@ -1,77 +0,0 @@
-/*
- *  linux/arch/m68k/hp300/time.c
- *
- *  Copyright (C) 1998 Philip Blundell <philb@gnu.org>
- *
- *  This file contains the HP300-specific time handling code.
- */
-
-#include <asm/ptrace.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/kernel_stat.h>
-#include <linux/interrupt.h>
-#include <asm/machdep.h>
-#include <asm/irq.h>
-#include <asm/io.h>
-#include <asm/traps.h>
-#include <asm/blinken.h>
-
-/* Clock hardware definitions */
-
-#define CLOCKBASE	0xf05f8000
-
-#define	CLKCR1		0x1
-#define	CLKCR2		0x3
-#define	CLKCR3		CLKCR1
-#define	CLKSR		CLKCR2
-#define	CLKMSB1		0x5
-#define	CLKMSB2		0x9
-#define	CLKMSB3		0xD
-
-/* This is for machines which generate the exact clock. */
-#define USECS_PER_JIFFY (1000000/HZ)
-
-#define INTVAL ((10000 / 4) - 1)
-
-static irqreturn_t hp300_tick(int irq, void *dev_id)
-{
-	unsigned long tmp;
-	irq_handler_t vector = dev_id;
-	in_8(CLOCKBASE + CLKSR);
-	asm volatile ("movpw %1@(5),%0" : "=d" (tmp) : "a" (CLOCKBASE));
-	/* Turn off the network and SCSI leds */
-	blinken_leds(0, 0xe0);
-	return vector(irq, NULL);
-}
-
-unsigned long hp300_gettimeoffset(void)
-{
-  /* Read current timer 1 value */
-  unsigned char lsb, msb1, msb2;
-  unsigned short ticks;
-
-  msb1 = in_8(CLOCKBASE + 5);
-  lsb = in_8(CLOCKBASE + 7);
-  msb2 = in_8(CLOCKBASE + 5);
-  if (msb1 != msb2)
-    /* A carry happened while we were reading.  Read it again */
-    lsb = in_8(CLOCKBASE + 7);
-  ticks = INTVAL - ((msb2 << 8) | lsb);
-  return (USECS_PER_JIFFY * ticks) / INTVAL;
-}
-
-void __init hp300_sched_init(irq_handler_t vector)
-{
-  out_8(CLOCKBASE + CLKCR2, 0x1);		/* select CR1 */
-  out_8(CLOCKBASE + CLKCR1, 0x1);		/* reset */
-
-  asm volatile(" movpw %0,%1@(5)" : : "d" (INTVAL), "a" (CLOCKBASE));
-
-  if (request_irq(IRQ_AUTO_6, hp300_tick, 0, "timer tick", vector))
-    pr_err("Couldn't register timer interrupt\n");
-
-  out_8(CLOCKBASE + CLKCR2, 0x1);		/* select CR1 */
-  out_8(CLOCKBASE + CLKCR1, 0x40);		/* enable irq */
-}
diff --git a/ANDROID_3.4.5/arch/m68k/hp300/time.h b/ANDROID_3.4.5/arch/m68k/hp300/time.h
deleted file mode 100644
index 7b982429..00000000
--- a/ANDROID_3.4.5/arch/m68k/hp300/time.h
+++ /dev/null
@@ -1,2 +0,0 @@
-extern void hp300_sched_init(irq_handler_t vector);
-extern unsigned long hp300_gettimeoffset(void);
diff --git a/ANDROID_3.4.5/arch/m68k/ifpsp060/CHANGES b/ANDROID_3.4.5/arch/m68k/ifpsp060/CHANGES
deleted file mode 100644
index ba965969..00000000
--- a/ANDROID_3.4.5/arch/m68k/ifpsp060/CHANGES
+++ /dev/null
@@ -1,120 +0,0 @@
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-MOTOROLA MICROPROCESSOR & MEMORY TECHNOLOGY GROUP
-M68000 Hi-Performance Microprocessor Division
-M68060 Software Package
-Production Release P1.00 -- October 10, 1994
-
-M68060 Software Package Copyright © 1993, 1994 Motorola Inc.  All rights reserved.
-
-THE SOFTWARE is provided on an "AS IS" basis and without warranty.
-To the maximum extent permitted by applicable law,
-MOTOROLA DISCLAIMS ALL WARRANTIES WHETHER EXPRESS OR IMPLIED,
-INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
-and any warranty against infringement with regard to the SOFTWARE
-(INCLUDING ANY MODIFIED VERSIONS THEREOF) and any accompanying written materials.
-
-To the maximum extent permitted by applicable law,
-IN NO EVENT SHALL MOTOROLA BE LIABLE FOR ANY DAMAGES WHATSOEVER
-(INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS,
-BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, OR OTHER PECUNIARY LOSS)
-ARISING OF THE USE OR INABILITY TO USE THE SOFTWARE.
-Motorola assumes no responsibility for the maintenance and support of the SOFTWARE.
-
-You are hereby granted a copyright license to use, modify, and distribute the SOFTWARE
-so long as this entire notice is retained without alteration in any modified and/or
-redistributed versions, and that such modified versions are clearly identified as such.
-No licenses are granted by implication, estoppel or otherwise under any patents
-or trademarks of Motorola, Inc.
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-CHANGES SINCE LAST RELEASE:
----------------------------
-
-1) "movep" emulation where data was being read from memory
-was reading the intermediate bytes. Emulation now only
-reads the required bytes.
-
-2) "flogn", "flog2", and "flog10" of "1" was setting the
-Inexact FPSR bit. Emulation now does not set Inexact for
-this case.
-
-3) For an opclass three FP instruction where the effective addressing
-mode was pre-decrement or post-increment and the address register
-was A0 or A1, the address register was not being updated as a result
-of the operation. This has been corrected.
-
-4) Beta B.2 version had the following erratum:
-
-	Scenario:
-	---------
-	If {i,d}mem_{read,write}_{byte,word,long}() returns
-	a failing value to the 68060SP, the package ignores
-	this return value and continues with program execution
-	as if it never received a failing value.
-
-	Effect:
-	-------
-	For example, if a user executed "fsin.x ADDR,fp0" where
-	ADDR should cause a "segmentation violation", the memory read
-	requested by the package should return a failing value
-	to the package. Since the package currently ignores this
-	return value, the user program will continue to the
-	next instruction, and the result created in fp0 will be
-	undefined.
-
-	Fix:
-	----
-	This has been fixed in the current release.
-
-	Notes:
-	------
-	Upon receiving a non-zero (failing) return value from
-	a {i,d}mem_{read,write}_{byte,word,long}() "call-out",
-	the package creates a 16-byte access error stack frame
-	from the current exception stack frame and exits
-	through the "call-out" _real_access(). This is the process
-	as described in the MC68060 User's Manual.
-
-	For instruction read access errors, the info stacked is:
-		SR	= SR at time of exception
-		PC	= PC of instruction being emulated
-		VOFF	= $4008 (stack frame format type)
-		ADDRESS	= PC of instruction being emulated
-		FSLW	= FAULT STATUS LONGWORD
-
-	The valid FSLW bits are:
-		bit 27		= 1	(misaligned bit)
-		bit 24		= 1	(read)
-		bit 23		= 0	(write)
-		bit 22:21	= 10	(SIZE = word)
-		bit 20:19	= 00	(TT)
-		bit 18:16	= x10	(TM; x = 1 for supervisor mode)
-		bit 15		= 1	(IO)
-		bit 0		= 1	(Software Emulation Error)
-
-	all other bits are EQUAL TO ZERO and can be set by the _real_access()
-	"call-out" stub by the user as appropriate. The MC68060 User's Manual
-	stated that ONLY "bit 0" would be set. The 060SP attempts to set a few
-	other bits.
-
-	For data read/write access errors, the info stacked is:
-		SR	= SR at time of exception
-		PC	= PC of instruction being emulated
-		VOFF	= $4008 (stack frame format type)
-		ADDRESS	= Address of source or destination operand
-		FSLW	= FAULT STATUS LONGWORD
-
-	The valid FSLW bits are:
-		bit 27		= 0	(misaligned bit)
-		bit 24		= x	(read; 1 if read, 0 if write)
-		bit 23		= x	(write; 1 if write, 0 if read)
-		bit 22:21	= xx	(SIZE; see MC68060 User's Manual)
-		bit 20:19	= 00	(TT)
-		bit 18:16	= x01	(TM; x = 1 for supervisor mode)
-		bit 15		= 0	(IO)
-		bit 0		= 1	(Software Emulation Error)
-
-	all other bits are EQUAL TO ZERO and can be set by the _real_access()
-	"call-out" stub by the user as appropriate. The MC68060 User's Manual
-	stated that ONLY "bit 0" would be set. The 060SP attempts to set a few
-	other bits.
diff --git a/ANDROID_3.4.5/arch/m68k/ifpsp060/MISC b/ANDROID_3.4.5/arch/m68k/ifpsp060/MISC
deleted file mode 100644
index 1a63913d..00000000
--- a/ANDROID_3.4.5/arch/m68k/ifpsp060/MISC
+++ /dev/null
@@ -1,201 +0,0 @@
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-MOTOROLA MICROPROCESSOR & MEMORY TECHNOLOGY GROUP
-M68000 Hi-Performance Microprocessor Division
-M68060 Software Package
-Production Release P1.00 -- October 10, 1994
-
-M68060 Software Package Copyright © 1993, 1994 Motorola Inc.  All rights reserved.
-
-THE SOFTWARE is provided on an "AS IS" basis and without warranty.
-To the maximum extent permitted by applicable law,
-MOTOROLA DISCLAIMS ALL WARRANTIES WHETHER EXPRESS OR IMPLIED,
-INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
-and any warranty against infringement with regard to the SOFTWARE
-(INCLUDING ANY MODIFIED VERSIONS THEREOF) and any accompanying written materials.
-
-To the maximum extent permitted by applicable law,
-IN NO EVENT SHALL MOTOROLA BE LIABLE FOR ANY DAMAGES WHATSOEVER
-(INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS,
-BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, OR OTHER PECUNIARY LOSS)
-ARISING OF THE USE OR INABILITY TO USE THE SOFTWARE.
-Motorola assumes no responsibility for the maintenance and support of the SOFTWARE.
-
-You are hereby granted a copyright license to use, modify, and distribute the SOFTWARE
-so long as this entire notice is retained without alteration in any modified and/or
-redistributed versions, and that such modified versions are clearly identified as such.
-No licenses are granted by implication, estoppel or otherwise under any patents
-or trademarks of Motorola, Inc.
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-RELEASE FILE VERSIONS:
------------------------
-
-fpsp.sa
-----------
-freal.s     : 2.4
-hdr.fpu     : 2.4
-x_fovfl.s   : 2.16
-x_funfl.s   : 2.19
-x_funsupp.s : 2.27
-x_effadd.s  : 2.21
-x_foperr.s  : 2.9
-x_fsnan.s   : 2.12
-x_finex.s   : 2.14
-x_fdz.s     : 2.5
-x_fline.s   : 2.5
-x_funimp.s  : 2.27
-fsin.s      : 2.6
-ftan.s      : 2.6
-fatan.s     : 2.3
-fasin.s     : 2.3
-facos.s     : 2.5
-fetox.s     : 2.4
-fgetem.s    : 2.5
-fcosh.s     : 2.4
-fsinh.s     : 2.5
-ftanh.s     : 2.3
-flogn.s     : 2.6
-fatanh.s    : 2.4
-flog2.s     : 2.4
-ftwotox.s   : 2.4
-fmovecr.s   : 2.5
-fscale.s    : 2.5
-frem_mod.s  : 2.6
-fkern.s     : 2.6
-fkern2.s    : 2.5
-fgen_except.s: 2.7
-foptbl.s    : 2.3
-fmul.s      : 2.5
-fin.s       : 2.4
-fdiv.s      : 2.5
-fneg.s      : 2.4
-ftst.s      : 2.3
-fint.s      : 2.3
-fintrz.s    : 2.3
-fabs.s      : 2.4
-fcmp.s      : 2.4
-fsglmul.s   : 2.5
-fsgldiv.s   : 2.8
-fadd.s      : 2.6
-fsub.s      : 2.6
-fsqrt.s     : 2.4
-fmisc.s     : 2.3
-fdbcc.s     : 2.8
-ftrapcc.s   : 2.5
-fscc.s      : 2.6
-fmovm.s     : 2.15
-fctrl.s     : 2.6
-fcalc_ea.s  : 2.7
-fmem.s      : 2.9
-fout.s      : 2.9
-ireg.s      : 2.6
-fdenorm.s   : 2.3
-fround.s    : 2.4
-fnorm.s     : 2.3
-foptag_set.s: 2.4
-fresult.s   : 2.3
-fpack.s     : 2.6
-fdecbin.s   : 2.4
-fbindec.s   : 2.5
-fbinstr.s   : 2.3
-faccess.s   : 2.3
-
-pfpsp.sa
-----------
-freal.s     : 2.4
-hdr.fpu     : 2.4
-x_fovfl.s   : 2.16
-x_funfl.s   : 2.19
-x_funsupp.s : 2.27
-x_effadd.s  : 2.21
-x_foperr.s  : 2.9
-x_fsnan.s   : 2.12
-x_finex.s   : 2.14
-x_fdz.s     : 2.5
-x_fline2.s  : 2.3
-fcalc_ea.s  : 2.7
-foptbl2.s   : 2.4
-fmovm.s     : 2.15
-fctrl.s     : 2.6
-fmisc.s     : 2.3
-fdenorm.s   : 2.3
-fround.s    : 2.4
-fnorm.s     : 2.3
-foptag_set.s: 2.4
-fresult.s   : 2.3
-fout.s      : 2.9
-fmul.s      : 2.5
-fin.s       : 2.4
-fdiv.s      : 2.5
-fneg.s      : 2.4
-ftst.s      : 2.3
-fint.s      : 2.3
-fintrz.s    : 2.3
-fabs.s      : 2.4
-fcmp.s      : 2.4
-fsglmul.s   : 2.5
-fsgldiv.s   : 2.8
-fadd.s      : 2.6
-fsub.s      : 2.6
-fsqrt.s     : 2.4
-ireg.s      : 2.6
-fpack.s     : 2.6
-fdecbin.s   : 2.4
-fbindec.s   : 2.5
-fbinstr.s   : 2.3
-faccess.s   : 2.3
-
-fplsp.sa
-----------
-lfptop.s    : 2.3
-hdr.fpu     : 2.4
-fsin.s      : 2.6
-ftan.s      : 2.6
-fatan.s     : 2.3
-fasin.s     : 2.3
-facos.s     : 2.5
-fetox.s     : 2.4
-fgetem.s    : 2.5
-fcosh.s     : 2.4
-fsinh.s     : 2.5
-ftanh.s     : 2.3
-flogn.s     : 2.6
-fatanh.s    : 2.4
-flog2.s     : 2.4
-ftwotox.s   : 2.4
-fscale.s    : 2.5
-frem_mod.s  : 2.6
-l_support.s : 2.15
-fnorm.s     : 2.3
-
-isp.sa
-----------
-ireal.s     : 2.4
-hdr.int     : 2.4
-x_uieh.s    : 2.13
-icalc_ea.s  : 2.11
-imovep.s    : 2.8
-ichk2cmp2.s : 2.6
-idiv64.s    : 2.10
-imul64.s    :
-icas2.s     : 2.11
-icas.s      : 2.12
-icas2_core.s: 2.6
-icas_core.s : 2.6
-
-ilsp.sa
-----------
-litop.s     : 2.2
-l_idiv64.s  : 2.8
-l_imul64.s  : 2.6
-l_ichk2cmp2.s: 2.5
-
-ex. files
-----------
-wrk/fskeleton.s: 2.2
-wrk/iskeleton.s: 2.2
-wrk/os.s    : 2.1
-
-tests
-----------
-itest.s     : 2.2
-ftest.s     : 2.1
diff --git a/ANDROID_3.4.5/arch/m68k/ifpsp060/Makefile b/ANDROID_3.4.5/arch/m68k/ifpsp060/Makefile
deleted file mode 100644
index 43b43504..00000000
--- a/ANDROID_3.4.5/arch/m68k/ifpsp060/Makefile
+++ /dev/null
@@ -1,9 +0,0 @@
-# Makefile for 680x0 Linux 68060 integer/floating point support package
-#
-# This file is subject to the terms and conditions of the GNU General Public
-# License.  See the file "README.legal" in the main directory of this archive
-# for more details.
-
-obj-y := fskeleton.o iskeleton.o os.o
-
-EXTRA_LDFLAGS := -x
diff --git a/ANDROID_3.4.5/arch/m68k/ifpsp060/README b/ANDROID_3.4.5/arch/m68k/ifpsp060/README
deleted file mode 100644
index f6f8f5c5..00000000
--- a/ANDROID_3.4.5/arch/m68k/ifpsp060/README
+++ /dev/null
@@ -1,71 +0,0 @@
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-MOTOROLA MICROPROCESSOR & MEMORY TECHNOLOGY GROUP
-M68000 Hi-Performance Microprocessor Division
-M68060 Software Package
-Production Release P1.00 -- October 10, 1994
-
-M68060 Software Package Copyright © 1993, 1994 Motorola Inc.  All rights reserved.
-
-THE SOFTWARE is provided on an "AS IS" basis and without warranty.
-To the maximum extent permitted by applicable law,
-MOTOROLA DISCLAIMS ALL WARRANTIES WHETHER EXPRESS OR IMPLIED,
-INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
-and any warranty against infringement with regard to the SOFTWARE
-(INCLUDING ANY MODIFIED VERSIONS THEREOF) and any accompanying written materials.
-
-To the maximum extent permitted by applicable law,
-IN NO EVENT SHALL MOTOROLA BE LIABLE FOR ANY DAMAGES WHATSOEVER
-(INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS,
-BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, OR OTHER PECUNIARY LOSS)
-ARISING OF THE USE OR INABILITY TO USE THE SOFTWARE.
-Motorola assumes no responsibility for the maintenance and support of the SOFTWARE.
-
-You are hereby granted a copyright license to use, modify, and distribute the SOFTWARE
-so long as this entire notice is retained without alteration in any modified and/or
-redistributed versions, and that such modified versions are clearly identified as such.
-No licenses are granted by implication, estoppel or otherwise under any patents
-or trademarks of Motorola, Inc.
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-Files in this directory:
--------------------------
-
-fpsp.sa		Full FP Kernel Module - hex image
-fpsp.s		Full FP Kernel Module - source code
-fpsp.doc	Full FP Kernel Module - on-line documentation
-
-pfpsp.sa	Partial FP Kernel Module - hex image
-pfpsp.s		Partial FP Kernel Module - source code
-
-fplsp.sa	FP Library Module - hex image
-fplsp.s		FP Library Module - source code
-fplsp.doc	FP Library Module - on-line documentation
-
-isp.sa		Integer Unimplemented Kernel Module - hex image
-isp.s		Integer Unimplemented Kernel Module - source code
-isp.doc		Integer Unimplemented Kernel Module - on-line doc
-
-ilsp.sa		Integer Unimplemented Library Module - hex image
-ilsp.s		Integer Unimplemented Library Module - source code
-ilsp.doc	Integer Unimplemented Library Module - on-line doc
-
-fskeleton.s	Sample Call-outs needed by fpsp.sa and pfpsp.sa
-
-iskeleton.s	Sample Call-outs needed by isp.sa
-
-os.s		Sample Call-outs needed by fpsp.sa, pfpsp.sa, and isp.sa
-
-ftest.sa	Simple test program to test that {p}fpsp.sa
-		was connected properly; hex image
-ftest.s		above test; source code
-
-itest.sa	Simple test program to test that isp.sa was
-		connected properly; hex image
-itest.s		above test; source code
-
-test.doc	on-line documentation for {i,f}test.sa
-
-README		This file
-
-ERRATA		Known errata for this release
-
-MISC		Release file version numbers
diff --git a/ANDROID_3.4.5/arch/m68k/ifpsp060/TEST.DOC b/ANDROID_3.4.5/arch/m68k/ifpsp060/TEST.DOC
deleted file mode 100644
index 1ba3aef1..00000000
--- a/ANDROID_3.4.5/arch/m68k/ifpsp060/TEST.DOC
+++ /dev/null
@@ -1,208 +0,0 @@
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-MOTOROLA MICROPROCESSOR & MEMORY TECHNOLOGY GROUP
-M68000 Hi-Performance Microprocessor Division
-M68060 Software Package
-Production Release P1.00 -- October 10, 1994
-
-M68060 Software Package Copyright © 1993, 1994 Motorola Inc.  All rights reserved.
-
-THE SOFTWARE is provided on an "AS IS" basis and without warranty.
-To the maximum extent permitted by applicable law,
-MOTOROLA DISCLAIMS ALL WARRANTIES WHETHER EXPRESS OR IMPLIED,
-INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
-and any warranty against infringement with regard to the SOFTWARE
-(INCLUDING ANY MODIFIED VERSIONS THEREOF) and any accompanying written materials.
-
-To the maximum extent permitted by applicable law,
-IN NO EVENT SHALL MOTOROLA BE LIABLE FOR ANY DAMAGES WHATSOEVER
-(INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS,
-BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, OR OTHER PECUNIARY LOSS)
-ARISING OF THE USE OR INABILITY TO USE THE SOFTWARE.
-Motorola assumes no responsibility for the maintenance and support of the SOFTWARE.
-
-You are hereby granted a copyright license to use, modify, and distribute the SOFTWARE
-so long as this entire notice is retained without alteration in any modified and/or
-redistributed versions, and that such modified versions are clearly identified as such.
-No licenses are granted by implication, estoppel or otherwise under any patents
-or trademarks of Motorola, Inc.
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-68060 SOFTWARE PACKAGE (Kernel version) SIMPLE TESTS
------------------------------------------------------
-
-The files itest.sa and ftest.sa contain simple tests to check
-the state of the 68060ISP and 68060FPSP once they have been installed.
-
-Release file format:
---------------------
-The release files itest.sa and ftest.sa are essentially
-hexadecimal images of the actual tests. This format is the
-ONLY format that will be supported. The hex images were created
-by assembling the source code and then converting the resulting
-binary output images into ASCII text files. The hexadecimal
-numbers are listed using the Motorola Assembly syntax assembler
-directive "dc.l" (define constant longword). The files can be
-converted to other assembly syntaxes by using any word processor
-with a global search and replace function.
-
-To assist in assembling and linking these modules with other modules,
-the installer should add symbolic labels to the top of the files.
-This will allow the calling routines to access the entry points
-of these packages.
-
-The source code itest.s and ftest.s have been included but only
-for documentation purposes.
-
-Release file structure:
------------------------
-
-(top of module)
-	-----------------
-	|		| - 128 byte-sized section
-   (1)  |   Call-Out	| - 4 bytes per entry (user fills these in)
-	|		|
-	-----------------
-	|		| - 8 bytes per entry
-   (2)  | Entry Point	| - user does "bsr" or "jsr" to this address
-	|		|
-	-----------------
-	|		| - code section
-   (3)  ~		~
-	|		|
-	-----------------
-(bottom of module)
-
-The first section of this module is the "Call-out" section. This section
-is NOT INCLUDED in {i,f}test.sa (an example "Call-out" section is provided at
-the end of this file). The purpose of this section is to allow the test
-routines to reference external printing functions that must be provided
-by the host operating system. This section MUST be exactly 128 bytes in
-size. There are 32 fields, each 4 bytes in size. Each field corresponds
-to a function required by the test packages (these functions and their
-location are listed in "68060{ISP,FPSP}-TEST call-outs" below). Each field
-entry should contain the address of the corresponding function RELATIVE to
-the starting address of the "call-out" section. The "Call-out" section must
-sit adjacent to the {i,f}test.sa image in memory. Since itest.sa and ftest.sa
-are individual tests, they each require their own "Call-out" sections.
-
-The second section, the "Entry-point" section, is used by external routines
-to access the test routines. Since the {i,f}test.sa hex files contain
-no symbol names, this section contains function entry points that are fixed
-with respect to the top of the package. The currently defined entry-points
-are listed in section "68060{ISP,FPSP}-TEST entry points" below. A calling
-routine would simply execute a "bsr" or "jsr" that jumped to the selected
-function entry-point.
-
-For example, to run the 060ISP test, write a program that includes the
-itest.sa data and execute something similar to:
-
-	bsr	_060ISP_TEST+128+0
-
-(_060ISP_TEST is the starting address of the "Call-out" section; the "Call-out"
-section is 128 bytes long; and the 68060ISP test entry point is located
-0 bytes from the top of the "Entry-point" section.)
-
-The third section is the code section. After entering through an "Entry-point",
-the entry code jumps to the appropriate test code within the code section.
-
-68060ISP-TEST Call-outs:
-------------------------
-0x0: _print_string()
-0x4: _print_number()
-
-68060FPSP-TEST Call-outs:
--------------------------
-0x0: _print_string()
-0x4: _print_number()
-
-The test packages call _print_string() and _print_number()
-as subroutines and expect the main program to print a string
-or a number to a file or to the screen.
-In "C"-like fashion, the test program calls:
-
-	print_string("Test passed");
-
-		or
-
-	print_number(20);
-
-For _print_string(), the test programs pass a longword address
-of the string on the stack. For _print_number(), the test programs pass
-a longword number to be printed.
-
-For debugging purposes, after the main program performs a "print"
-for a test package, it should flush the output so that it's not
-buffered. In this way, if the test program crashes, at least the previous
-statements printed will be seen.
-
-68060ISP-TEST Entry-points:
----------------------------
-0x0: integer test
-
-68060FPSP-TEST Entry-points:
-----------------------------
-0x00: main fp test
-0x08: FP unimplemented test
-0x10: FP enabled snan/operr/ovfl/unfl/dz/inex
-
-The floating-point unit test has 3 entry points which will require
-3 different calls to the package if each of the three following tests
-is desired:
-
-main fp test: tests (1) unimp effective address exception
-		    (2) unsupported data type exceptions
-		    (3) non-maskable overflow/underflow exceptions
-
-FP unimplemented: tests FP unimplemented exception. this one is
-		  separate from the previous tests for systems that don't
-		  want FP unimplemented instructions.
-
-FP enabled: tests enabled snan/operr/ovfl/unfl/dz/inex.
-	    basically, it enables each of these exceptions and forces
-	    each using an implemented FP instruction. this process
-	    exercises _fpsp_{snan,operr,ovfl,unfl,dz,inex}() and
-	    _real_{snan,operr,ovfl,unfl,dz,inex}(). the test expects
-	    _real_XXXX() to do nothing except clear the exception
-	    and "rte". if a system's _real_XXXX() handler creates an
-	    alternate result, the test will print "failed" but this
-	    is acceptable.
-
-Miscellaneous:
---------------
-Again, itest.sa and ftest.sa are simple tests and do not thoroughly
-test all 68060SP connections. For example, they do not test connections
-to _real_access(), _real_trace(), _real_trap(), etc. because these
-will be system-implemented several different ways and the test packages
-must remain system independent.
-
-Example test package set-up:
-----------------------------
-_print_str:
-	.			# provided by system
-	rts
-
-_print_num:
-	.			# provided by system
-	rts
-
-	.
-	.
-	bsr	_060FPSP_TEST+128+0
-	.
-	.
-	rts
-
-# beginning of "Call-out" section; provided by integrator.
-# MUST be 128 bytes long.
-_060FPSP_TEST:
-	long	_print_str - _060FPSP_TEST
-	long	_print_num - _060FPSP_TEST
-	space	120
-
-# ftest.sa starts here; start of "Entry-point" section.
-	long	0x60ff0000, 0x00002346
-	long	0x60ff0000, 0x00018766
-	long	0x60ff0000, 0x00023338
-	long	0x24377299, 0xab2643ea
-		.
-		.
-		.
diff --git a/ANDROID_3.4.5/arch/m68k/ifpsp060/fplsp.doc b/ANDROID_3.4.5/arch/m68k/ifpsp060/fplsp.doc
deleted file mode 100644
index 89730a93..00000000
--- a/ANDROID_3.4.5/arch/m68k/ifpsp060/fplsp.doc
+++ /dev/null
@@ -1,231 +0,0 @@
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-MOTOROLA MICROPROCESSOR & MEMORY TECHNOLOGY GROUP
-M68000 Hi-Performance Microprocessor Division
-M68060 Software Package
-Production Release P1.00 -- October 10, 1994
-
-M68060 Software Package Copyright © 1993, 1994 Motorola Inc.  All rights reserved.
-
-THE SOFTWARE is provided on an "AS IS" basis and without warranty.
-To the maximum extent permitted by applicable law,
-MOTOROLA DISCLAIMS ALL WARRANTIES WHETHER EXPRESS OR IMPLIED,
-INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
-and any warranty against infringement with regard to the SOFTWARE
-(INCLUDING ANY MODIFIED VERSIONS THEREOF) and any accompanying written materials.
-
-To the maximum extent permitted by applicable law,
-IN NO EVENT SHALL MOTOROLA BE LIABLE FOR ANY DAMAGES WHATSOEVER
-(INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS,
-BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, OR OTHER PECUNIARY LOSS)
-ARISING OF THE USE OR INABILITY TO USE THE SOFTWARE.
-Motorola assumes no responsibility for the maintenance and support of the SOFTWARE.
-
-You are hereby granted a copyright license to use, modify, and distribute the SOFTWARE
-so long as this entire notice is retained without alteration in any modified and/or
-redistributed versions, and that such modified versions are clearly identified as such.
-No licenses are granted by implication, estoppel or otherwise under any patents
-or trademarks of Motorola, Inc.
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-68060 FLOATING-POINT SOFTWARE PACKAGE (Library version)
---------------------------------------------------------
-
-The file fplsp.sa contains the "Library version" of the
-68060SP Floating-Point Software Package. The routines
-included in this module can be used to emulate the
-FP instructions not implemented in 68060 hardware. These
-instructions normally take exception vector #11
-"FP Unimplemented Instruction".
-
-By re-compiling a program that uses these instructions, and
-making subroutine calls in place of the unimplemented
-instructions, a program can avoid the overhead associated
-with taking the exception.
-
-Release file format:
---------------------
-The file fplsp.sa is essentially a hexadecimal image of the
-release package. This is the ONLY format which will be supported.
-The hex image was created by assembling the source code and
-then converting the resulting binary output image into an
-ASCII text file. The hexadecimal numbers are listed
-using the Motorola Assembly Syntax assembler directive "dc.l"
-(define constant longword). The file can be converted to other
-assembly syntaxes by using any word processor with a global
-search and replace function.
-
-To assist in assembling and linking this module with other modules,
-the installer should add a symbolic label to the top of the file.
-This will allow calling routines to access the entry points
-of this package.
-
-The source code fplsp.s has also been included but only for
-documentation purposes.
-
-Release file structure:
------------------------
-The file fplsp.sa contains an "Entry-Point" section and a
-code section. The FPLSP has no "Call-Out" section. The first section
-is the "Entry-Point" section. In order to access a function in the
-package, a program must "bsr" or "jsr" to the location listed
-below in "68060FPLSP entry points" that corresponds to the desired
-function. A branch instruction located at the selected entry point
-within the package will then enter the correct emulation code routine.
-
-The entry point addresses at the beginning of the package will remain
-fixed so that a program calling the routines will not have to be
-re-compiled with every new 68060FPLSP release.
-
-There are 3 entry-points for each instruction type: single precision,
-double precision, and extended precision.
-
-As an example, the "fsin" library instruction can be passed an
-extended precision operand if program executes:
-
-# fsin.x fp0
-
-	fmovm.x	&0x01,-(%sp)	# pass operand on stack
-	bsr.l	_060FPLSP_TOP+0x1a8 # branch to fsin routine
-	add.l	&0xc,%sp	# clear operand from stack
-
-Upon return, fp0 holds the correct result. The FPSR is
-set correctly. The FPCR is unchanged. The FPIAR is undefined.
-
-Another example. This time, a dyadic operation:
-
-# frem.s %fp1,%fp0
-
-	fmov.s	%fp1,-(%sp)	# pass src operand
-	fmov.s	%fp0,-(%sp)	# pass dst operand
-	bsr.l	_060FPLSP_TOP+0x168 # branch to frem routine
-	addq.l	&0x8,%sp	# clear operands from stack
-
-Again, the result is returned in fp0. Note that BOTH operands
-are passed in single precision format.
-
-Exception reporting:
---------------------
-The package takes exceptions according to the FPCR value upon subroutine
-entry. If an exception should be reported, then the package forces
-this exception using implemented floating-point instructions.
-For example, if the instruction being emulated should cause a
-floating-point Operand Error exception, then the library routine
-executes an FMUL of a zero and an infinity to force the OPERR
-exception. Although the FPIAR will be undefined for the enabled
-Operand Error exception handler, the user will at least be able
-to record that the event occurred.
-
-Miscellaneous:
---------------
-The package does not attempt to correctly emulate instructions
-with Signalling NAN inputs. Use of SNANs should be avoided with
-this package.
-
-The fabs/fadd/fdiv/fint/fintrz/fmul/fneg/fsqrt/fsub entry points
-are provided for the convenience of older compilers that make
-subroutine calls for all fp instructions. The code does NOT emulate
-the instruction but rather simply executes it.
-
-68060FPLSP entry points:
-------------------------
-_060FPLSP_TOP:
-0x000:	_060LSP__facoss_
-0x008:	_060LSP__facosd_
-0x010:	_060LSP__facosx_
-0x018:	_060LSP__fasins_
-0x020:	_060LSP__fasind_
-0x028:	_060LSP__fasinx_
-0x030:	_060LSP__fatans_
-0x038:	_060LSP__fatand_
-0x040:	_060LSP__fatanx_
-0x048:	_060LSP__fatanhs_
-0x050:	_060LSP__fatanhd_
-0x058:	_060LSP__fatanhx_
-0x060:	_060LSP__fcoss_
-0x068:	_060LSP__fcosd_
-0x070:	_060LSP__fcosx_
-0x078:	_060LSP__fcoshs_
-0x080:	_060LSP__fcoshd_
-0x088:	_060LSP__fcoshx_
-0x090:	_060LSP__fetoxs_
-0x098:	_060LSP__fetoxd_
-0x0a0:	_060LSP__fetoxx_
-0x0a8:	_060LSP__fetoxm1s_
-0x0b0:	_060LSP__fetoxm1d_
-0x0b8:	_060LSP__fetoxm1x_
-0x0c0:	_060LSP__fgetexps_
-0x0c8:	_060LSP__fgetexpd_
-0x0d0:	_060LSP__fgetexpx_
-0x0d8:	_060LSP__fgetmans_
-0x0e0:	_060LSP__fgetmand_
-0x0e8:	_060LSP__fgetmanx_
-0x0f0:	_060LSP__flog10s_
-0x0f8:	_060LSP__flog10d_
-0x100:	_060LSP__flog10x_
-0x108:	_060LSP__flog2s_
-0x110:	_060LSP__flog2d_
-0x118:	_060LSP__flog2x_
-0x120:	_060LSP__flogns_
-0x128:	_060LSP__flognd_
-0x130:	_060LSP__flognx_
-0x138:	_060LSP__flognp1s_
-0x140:	_060LSP__flognp1d_
-0x148:	_060LSP__flognp1x_
-0x150:	_060LSP__fmods_
-0x158:	_060LSP__fmodd_
-0x160:	_060LSP__fmodx_
-0x168:	_060LSP__frems_
-0x170:	_060LSP__fremd_
-0x178:	_060LSP__fremx_
-0x180:	_060LSP__fscales_
-0x188:	_060LSP__fscaled_
-0x190:	_060LSP__fscalex_
-0x198:	_060LSP__fsins_
-0x1a0:	_060LSP__fsind_
-0x1a8:	_060LSP__fsinx_
-0x1b0:	_060LSP__fsincoss_
-0x1b8:	_060LSP__fsincosd_
-0x1c0:	_060LSP__fsincosx_
-0x1c8:	_060LSP__fsinhs_
-0x1d0:	_060LSP__fsinhd_
-0x1d8:	_060LSP__fsinhx_
-0x1e0:	_060LSP__ftans_
-0x1e8:	_060LSP__ftand_
-0x1f0:	_060LSP__ftanx_
-0x1f8:	_060LSP__ftanhs_
-0x200:	_060LSP__ftanhd_
-0x208:	_060LSP__ftanhx_
-0x210:	_060LSP__ftentoxs_
-0x218:	_060LSP__ftentoxd_
-0x220:	_060LSP__ftentoxx_
-0x228:	_060LSP__ftwotoxs_
-0x230:	_060LSP__ftwotoxd_
-0x238:	_060LSP__ftwotoxx_
-
-0x240:	_060LSP__fabss_
-0x248:	_060LSP__fabsd_
-0x250:	_060LSP__fabsx_
-0x258:	_060LSP__fadds_
-0x260:	_060LSP__faddd_
-0x268:	_060LSP__faddx_
-0x270:	_060LSP__fdivs_
-0x278:	_060LSP__fdivd_
-0x280:	_060LSP__fdivx_
-0x288:	_060LSP__fints_
-0x290:	_060LSP__fintd_
-0x298:	_060LSP__fintx_
-0x2a0:	_060LSP__fintrzs_
-0x2a8:	_060LSP__fintrzd_
-0x2b0:	_060LSP__fintrzx_
-0x2b8:	_060LSP__fmuls_
-0x2c0:	_060LSP__fmuld_
-0x2c8:	_060LSP__fmulx_
-0x2d0:	_060LSP__fnegs_
-0x2d8:	_060LSP__fnegd_
-0x2e0:	_060LSP__fnegx_
-0x2e8:	_060LSP__fsqrts_
-0x2f0:	_060LSP__fsqrtd_
-0x2f8:	_060LSP__fsqrtx_
-0x300:	_060LSP__fsubs_
-0x308:	_060LSP__fsubd_
-0x310:	_060LSP__fsubx_
diff --git a/ANDROID_3.4.5/arch/m68k/ifpsp060/fplsp.sa b/ANDROID_3.4.5/arch/m68k/ifpsp060/fplsp.sa
deleted file mode 100644
index 8826df03..00000000
--- a/ANDROID_3.4.5/arch/m68k/ifpsp060/fplsp.sa
+++ /dev/null
@@ -1,1946 +0,0 @@
-	dc.l	$60ff0000,$238e0000,$60ff0000,$24200000
-	dc.l	$60ff0000,$24b60000,$60ff0000,$11060000
-	dc.l	$60ff0000,$11980000,$60ff0000,$122e0000
-	dc.l	$60ff0000,$0f160000,$60ff0000,$0fa80000
-	dc.l	$60ff0000,$103e0000,$60ff0000,$12ae0000
-	dc.l	$60ff0000,$13400000,$60ff0000,$13d60000
-	dc.l	$60ff0000,$05ae0000,$60ff0000,$06400000
-	dc.l	$60ff0000,$06d60000,$60ff0000,$213e0000
-	dc.l	$60ff0000,$21d00000,$60ff0000,$22660000
-	dc.l	$60ff0000,$16160000,$60ff0000,$16a80000
-	dc.l	$60ff0000,$173e0000,$60ff0000,$0aee0000
-	dc.l	$60ff0000,$0b800000,$60ff0000,$0c160000
-	dc.l	$60ff0000,$24a60000,$60ff0000,$25380000
-	dc.l	$60ff0000,$25ce0000,$60ff0000,$26660000
-	dc.l	$60ff0000,$26f80000,$60ff0000,$278e0000
-	dc.l	$60ff0000,$1d160000,$60ff0000,$1da80000
-	dc.l	$60ff0000,$1e3e0000,$60ff0000,$1ed60000
-	dc.l	$60ff0000,$1f680000,$60ff0000,$1ffe0000
-	dc.l	$60ff0000,$1b0e0000,$60ff0000,$1ba00000
-	dc.l	$60ff0000,$1c360000,$60ff0000,$08860000
-	dc.l	$60ff0000,$09180000,$60ff0000,$09ae0000
-	dc.l	$60ff0000,$2bf00000,$60ff0000,$2ca40000
-	dc.l	$60ff0000,$2d580000,$60ff0000,$29980000
-	dc.l	$60ff0000,$2a4c0000,$60ff0000,$2b000000
-	dc.l	$60ff0000,$2e000000,$60ff0000,$2eb40000
-	dc.l	$60ff0000,$2f680000,$60ff0000,$029e0000
-	dc.l	$60ff0000,$03300000,$60ff0000,$03c60000
-	dc.l	$60ff0000,$27660000,$60ff0000,$27fe0000
-	dc.l	$60ff0000,$289a0000,$60ff0000,$061e0000
-	dc.l	$60ff0000,$06b00000,$60ff0000,$07460000
-	dc.l	$60ff0000,$12ee0000,$60ff0000,$13800000
-	dc.l	$60ff0000,$14160000,$60ff0000,$0b760000
-	dc.l	$60ff0000,$0c080000,$60ff0000,$0c9e0000
-	dc.l	$60ff0000,$18460000,$60ff0000,$18d80000
-	dc.l	$60ff0000,$196e0000,$60ff0000,$16560000
-	dc.l	$60ff0000,$16e80000,$60ff0000,$177e0000
-	dc.l	$60ff0000,$72fe0000,$60ff0000,$72fe0000
-	dc.l	$60ff0000,$72fe0000,$60ff0000,$71be0000
-	dc.l	$60ff0000,$71d40000,$60ff0000,$71ea0000
-	dc.l	$60ff0000,$72840000,$60ff0000,$729a0000
-	dc.l	$60ff0000,$72b00000,$60ff0000,$72fe0000
-	dc.l	$60ff0000,$72fe0000,$60ff0000,$72fe0000
-	dc.l	$60ff0000,$72fe0000,$60ff0000,$72fe0000
-	dc.l	$60ff0000,$72fe0000,$60ff0000,$71f20000
-	dc.l	$60ff0000,$72080000,$60ff0000,$721e0000
-	dc.l	$60ff0000,$72860000,$60ff0000,$72860000
-	dc.l	$60ff0000,$72860000,$60ff0000,$72860000
-	dc.l	$60ff0000,$72860000,$60ff0000,$72860000
-	dc.l	$60ff0000,$71600000,$60ff0000,$71760000
-	dc.l	$60ff0000,$718c0000,$51fc51fc,$51fc51fc
-	dc.l	$51fc51fc,$51fc51fc,$51fc51fc,$51fc51fc
-	dc.l	$51fc51fc,$51fc51fc,$51fc51fc,$51fc51fc
-	dc.l	$51fc51fc,$51fc51fc,$51fc51fc,$51fc51fc
-	dc.l	$51fc51fc,$51fc51fc,$51fc51fc,$51fc51fc
-	dc.l	$51fc51fc,$51fc51fc,$51fc51fc,$51fc51fc
-	dc.l	$51fc51fc,$51fc51fc,$51fc51fc,$51fc51fc
-	dc.l	$51fc51fc,$51fc51fc,$51fc51fc,$51fc51fc
-	dc.l	$51fc51fc,$51fc51fc,$51fc51fc,$51fc51fc
-	dc.l	$51fc51fc,$51fc51fc,$51fc51fc,$51fc51fc
-	dc.l	$51fc51fc,$51fc51fc,$51fc51fc,$51fc51fc
-	dc.l	$51fc51fc,$51fc51fc,$51fc51fc,$51fc51fc
-	dc.l	$51fc51fc,$51fc51fc,$51fc51fc,$51fc51fc
-	dc.l	$51fc51fc,$51fc51fc,$51fc51fc,$51fc51fc
-	dc.l	$51fc51fc,$51fc51fc,$51fc51fc,$51fc51fc
-	dc.l	$40c62d38,$d3d64634,$3d6f90ae,$b1e75cc7
-	dc.l	$40000000,$c90fdaa2,$2168c235,$00000000
-	dc.l	$3fff0000,$c90fdaa2,$2168c235,$00000000
-	dc.l	$3fe45f30,$6dc9c883,$4e56ff40,$48ee0303
-	dc.l	$ff9cf22e,$b800ff60,$f22ef0c0,$ffdcf23c
-	dc.l	$90000000,$0000f22e,$44000008,$f22e6800
-	dc.l	$ff6c41ee,$ff6c61ff,$00006c76,$1d40ff4e
-	dc.l	$120002ae,$00ff00ff,$ff644280,$102eff63
-	dc.l	$4a016608,$61ff0000,$2ddc6030,$0c010001
-	dc.l	$660861ff,$00007124,$60220c01,$00026608
-	dc.l	$61ff0000,$6d226014,$0c010003,$660861ff
-	dc.l	$00006f4c,$600661ff,$00002f8e,$4cee0303
-	dc.l	$ff9cf22e,$9800ff60,$f22ed040,$ffe84e5e
-	dc.l	$4e754e56,$ff4048ee,$0303ff9c,$f22eb800
-	dc.l	$ff60f22e,$f0c0ffdc,$f23c9000,$00000000
-	dc.l	$f22e5400,$0008f22e,$6800ff6c,$41eeff6c
-	dc.l	$61ff0000,$6bdc1d40,$ff4e1200,$02ae00ff
-	dc.l	$00ffff64,$4280102e,$ff631d41,$ff4e4a01
-	dc.l	$660861ff,$00002d3e,$60300c01,$00016608
-	dc.l	$61ff0000,$70866022,$0c010002,$660861ff
-	dc.l	$00006c84,$60140c01,$00036608,$61ff0000
-	dc.l	$6eae6006,$61ff0000,$2ef04cee,$0303ff9c
-	dc.l	$f22e9800,$ff60f22e,$d040ffe8,$4e5e4e75
-	dc.l	$4e56ff40,$48ee0303,$ff9cf22e,$b800ff60
-	dc.l	$f22ef0c0,$ffdcf23c,$90000000,$000041ee
-	dc.l	$ff6c216e,$00080000,$216e000c,$0004216e
-	dc.l	$00100008,$61ff0000,$6b381d40,$ff4e1200
-	dc.l	$02ae00ff,$00ffff64,$4280102e,$ff634a01
-	dc.l	$660861ff,$00002c9e,$60300c01,$00016608
-	dc.l	$61ff0000,$6fe66022,$0c010002,$660861ff
-	dc.l	$00006be4,$60140c01,$00036608,$61ff0000
-	dc.l	$6e0e6006,$61ff0000,$2e504cee,$0303ff9c
-	dc.l	$f22e9800,$ff60f22e,$d040ffe8,$4e5e4e75
-	dc.l	$4e56ff40,$48ee0303,$ff9cf22e,$b800ff60
-	dc.l	$f22ef0c0,$ffdcf23c,$90000000,$0000f22e
-	dc.l	$44000008,$f22e6800,$ff6c41ee,$ff6c61ff
-	dc.l	$00006a9e,$1d40ff4e,$120002ae,$00ff00ff
-	dc.l	$ff644280,$102eff63,$4a016608,$61ff0000
-	dc.l	$2c0e6030,$0c010001,$660861ff,$00006fc8
-	dc.l	$60220c01,$00026608,$61ff0000,$6b4a6014
-	dc.l	$0c010003,$660861ff,$00006d74,$600661ff
-	dc.l	$00002dbc,$4cee0303,$ff9cf22e,$9800ff60
-	dc.l	$f22ed040,$ffe84e5e,$4e754e56,$ff4048ee
-	dc.l	$0303ff9c,$f22eb800,$ff60f22e,$f0c0ffdc
-	dc.l	$f23c9000,$00000000,$f22e5400,$0008f22e
-	dc.l	$6800ff6c,$41eeff6c,$61ff0000,$6a041d40
-	dc.l	$ff4e1200,$02ae00ff,$00ffff64,$4280102e
-	dc.l	$ff631d41,$ff4e4a01,$660861ff,$00002b70
-	dc.l	$60300c01,$00016608,$61ff0000,$6f2a6022
-	dc.l	$0c010002,$660861ff,$00006aac,$60140c01
-	dc.l	$00036608,$61ff0000,$6cd66006,$61ff0000
-	dc.l	$2d1e4cee,$0303ff9c,$f22e9800,$ff60f22e
-	dc.l	$d040ffe8,$4e5e4e75,$4e56ff40,$48ee0303
-	dc.l	$ff9cf22e,$b800ff60,$f22ef0c0,$ffdcf23c
-	dc.l	$90000000,$000041ee,$ff6c216e,$00080000
-	dc.l	$216e000c,$0004216e,$00100008,$61ff0000
-	dc.l	$69601d40,$ff4e1200,$02ae00ff,$00ffff64
-	dc.l	$4280102e,$ff634a01,$660861ff,$00002ad0
-	dc.l	$60300c01,$00016608,$61ff0000,$6e8a6022
-	dc.l	$0c010002,$660861ff,$00006a0c,$60140c01
-	dc.l	$00036608,$61ff0000,$6c366006,$61ff0000
-	dc.l	$2c7e4cee,$0303ff9c,$f22e9800,$ff60f22e
-	dc.l	$d040ffe8,$4e5e4e75,$4e56ff40,$48ee0303
-	dc.l	$ff9cf22e,$b800ff60,$f22ef0c0,$ffdcf23c
-	dc.l	$90000000,$0000f22e,$44000008,$f22e6800
-	dc.l	$ff6c41ee,$ff6c61ff,$000068c6,$1d40ff4e
-	dc.l	$120002ae,$00ff00ff,$ff644280,$102eff63
-	dc.l	$4a016608,$61ff0000,$4e686030,$0c010001
-	dc.l	$660861ff,$00006d74,$60220c01,$00026608
-	dc.l	$61ff0000,$6d946014,$0c010003,$660861ff
-	dc.l	$00006b9c,$600661ff,$00004f14,$4cee0303
-	dc.l	$ff9cf22e,$9800ff60,$f22ed040,$ffe84e5e
-	dc.l	$4e754e56,$ff4048ee,$0303ff9c,$f22eb800
-	dc.l	$ff60f22e,$f0c0ffdc,$f23c9000,$00000000
-	dc.l	$f22e5400,$0008f22e,$6800ff6c,$41eeff6c
-	dc.l	$61ff0000,$682c1d40,$ff4e1200,$02ae00ff
-	dc.l	$00ffff64,$4280102e,$ff631d41,$ff4e4a01
-	dc.l	$660861ff,$00004dca,$60300c01,$00016608
-	dc.l	$61ff0000,$6cd66022,$0c010002,$660861ff
-	dc.l	$00006cf6,$60140c01,$00036608,$61ff0000
-	dc.l	$6afe6006,$61ff0000,$4e764cee,$0303ff9c
-	dc.l	$f22e9800,$ff60f22e,$d040ffe8,$4e5e4e75
-	dc.l	$4e56ff40,$48ee0303,$ff9cf22e,$b800ff60
-	dc.l	$f22ef0c0,$ffdcf23c,$90000000,$000041ee
-	dc.l	$ff6c216e,$00080000,$216e000c,$0004216e
-	dc.l	$00100008,$61ff0000,$67881d40,$ff4e1200
-	dc.l	$02ae00ff,$00ffff64,$4280102e,$ff634a01
-	dc.l	$660861ff,$00004d2a,$60300c01,$00016608
-	dc.l	$61ff0000,$6c366022,$0c010002,$660861ff
-	dc.l	$00006c56,$60140c01,$00036608,$61ff0000
-	dc.l	$6a5e6006,$61ff0000,$4dd64cee,$0303ff9c
-	dc.l	$f22e9800,$ff60f22e,$d040ffe8,$4e5e4e75
-	dc.l	$4e56ff40,$48ee0303,$ff9cf22e,$b800ff60
-	dc.l	$f22ef0c0,$ffdcf23c,$90000000,$0000f22e
-	dc.l	$44000008,$f22e6800,$ff6c41ee,$ff6c61ff
-	dc.l	$000066ee,$1d40ff4e,$120002ae,$00ff00ff
-	dc.l	$ff644280,$102eff63,$4a016608,$61ff0000
-	dc.l	$59b26030,$0c010001,$660861ff,$00006b9c
-	dc.l	$60220c01,$00026608,$61ff0000,$6bf26014
-	dc.l	$0c010003,$660861ff,$000069c4,$600661ff
-	dc.l	$00005ad4,$4cee0303,$ff9cf22e,$9800ff60
-	dc.l	$f22ed040,$ffe84e5e,$4e754e56,$ff4048ee
-	dc.l	$0303ff9c,$f22eb800,$ff60f22e,$f0c0ffdc
-	dc.l	$f23c9000,$00000000,$f22e5400,$0008f22e
-	dc.l	$6800ff6c,$41eeff6c,$61ff0000,$66541d40
-	dc.l	$ff4e1200,$02ae00ff,$00ffff64,$4280102e
-	dc.l	$ff631d41,$ff4e4a01,$660861ff,$00005914
-	dc.l	$60300c01,$00016608,$61ff0000,$6afe6022
-	dc.l	$0c010002,$660861ff,$00006b54,$60140c01
-	dc.l	$00036608,$61ff0000,$69266006,$61ff0000
-	dc.l	$5a364cee,$0303ff9c,$f22e9800,$ff60f22e
-	dc.l	$d040ffe8,$4e5e4e75,$4e56ff40,$48ee0303
-	dc.l	$ff9cf22e,$b800ff60,$f22ef0c0,$ffdcf23c
-	dc.l	$90000000,$000041ee,$ff6c216e,$00080000
-	dc.l	$216e000c,$0004216e,$00100008,$61ff0000
-	dc.l	$65b01d40,$ff4e1200,$02ae00ff,$00ffff64
-	dc.l	$4280102e,$ff634a01,$660861ff,$00005874
-	dc.l	$60300c01,$00016608,$61ff0000,$6a5e6022
-	dc.l	$0c010002,$660861ff,$00006ab4,$60140c01
-	dc.l	$00036608,$61ff0000,$68866006,$61ff0000
-	dc.l	$59964cee,$0303ff9c,$f22e9800,$ff60f22e
-	dc.l	$d040ffe8,$4e5e4e75,$4e56ff40,$48ee0303
-	dc.l	$ff9cf22e,$b800ff60,$f22ef0c0,$ffdcf23c
-	dc.l	$90000000,$0000f22e,$44000008,$f22e6800
-	dc.l	$ff6c41ee,$ff6c61ff,$00006516,$1d40ff4e
-	dc.l	$120002ae,$00ff00ff,$ff644280,$102eff63
-	dc.l	$4a016608,$61ff0000,$46c46030,$0c010001
-	dc.l	$660861ff,$000069c4,$60220c01,$00026608
-	dc.l	$61ff0000,$6a246014,$0c010003,$660861ff
-	dc.l	$000067ec,$600661ff,$00004948,$4cee0303
-	dc.l	$ff9cf22e,$9800ff60,$f22ed040,$ffe84e5e
-	dc.l	$4e754e56,$ff4048ee,$0303ff9c,$f22eb800
-	dc.l	$ff60f22e,$f0c0ffdc,$f23c9000,$00000000
-	dc.l	$f22e5400,$0008f22e,$6800ff6c,$41eeff6c
-	dc.l	$61ff0000,$647c1d40,$ff4e1200,$02ae00ff
-	dc.l	$00ffff64,$4280102e,$ff631d41,$ff4e4a01
-	dc.l	$660861ff,$00004626,$60300c01,$00016608
-	dc.l	$61ff0000,$69266022,$0c010002,$660861ff
-	dc.l	$00006986,$60140c01,$00036608,$61ff0000
-	dc.l	$674e6006,$61ff0000,$48aa4cee,$0303ff9c
-	dc.l	$f22e9800,$ff60f22e,$d040ffe8,$4e5e4e75
-	dc.l	$4e56ff40,$48ee0303,$ff9cf22e,$b800ff60
-	dc.l	$f22ef0c0,$ffdcf23c,$90000000,$000041ee
-	dc.l	$ff6c216e,$00080000,$216e000c,$0004216e
-	dc.l	$00100008,$61ff0000,$63d81d40,$ff4e1200
-	dc.l	$02ae00ff,$00ffff64,$4280102e,$ff634a01
-	dc.l	$660861ff,$00004586,$60300c01,$00016608
-	dc.l	$61ff0000,$68866022,$0c010002,$660861ff
-	dc.l	$000068e6,$60140c01,$00036608,$61ff0000
-	dc.l	$66ae6006,$61ff0000,$480a4cee,$0303ff9c
-	dc.l	$f22e9800,$ff60f22e,$d040ffe8,$4e5e4e75
-	dc.l	$4e56ff40,$48ee0303,$ff9cf22e,$b800ff60
-	dc.l	$f22ef0c0,$ffdcf23c,$90000000,$0000f22e
-	dc.l	$44000008,$f22e6800,$ff6c41ee,$ff6c61ff
-	dc.l	$0000633e,$1d40ff4e,$120002ae,$00ff00ff
-	dc.l	$ff644280,$102eff63,$4a016608,$61ff0000
-	dc.l	$49c46030,$0c010001,$660861ff,$000067ec
-	dc.l	$60220c01,$00026608,$61ff0000,$68546014
-	dc.l	$0c010003,$660861ff,$00006614,$600661ff
-	dc.l	$00004afa,$4cee0303,$ff9cf22e,$9800ff60
-	dc.l	$f22ed040,$ffe84e5e,$4e754e56,$ff4048ee
-	dc.l	$0303ff9c,$f22eb800,$ff60f22e,$f0c0ffdc
-	dc.l	$f23c9000,$00000000,$f22e5400,$0008f22e
-	dc.l	$6800ff6c,$41eeff6c,$61ff0000,$62a41d40
-	dc.l	$ff4e1200,$02ae00ff,$00ffff64,$4280102e
-	dc.l	$ff631d41,$ff4e4a01,$660861ff,$00004926
-	dc.l	$60300c01,$00016608,$61ff0000,$674e6022
-	dc.l	$0c010002,$660861ff,$000067b6,$60140c01
-	dc.l	$00036608,$61ff0000,$65766006,$61ff0000
-	dc.l	$4a5c4cee,$0303ff9c,$f22e9800,$ff60f22e
-	dc.l	$d040ffe8,$4e5e4e75,$4e56ff40,$48ee0303
-	dc.l	$ff9cf22e,$b800ff60,$f22ef0c0,$ffdcf23c
-	dc.l	$90000000,$000041ee,$ff6c216e,$00080000
-	dc.l	$216e000c,$0004216e,$00100008,$61ff0000
-	dc.l	$62001d40,$ff4e1200,$02ae00ff,$00ffff64
-	dc.l	$4280102e,$ff634a01,$660861ff,$00004886
-	dc.l	$60300c01,$00016608,$61ff0000,$66ae6022
-	dc.l	$0c010002,$660861ff,$00006716,$60140c01
-	dc.l	$00036608,$61ff0000,$64d66006,$61ff0000
-	dc.l	$49bc4cee,$0303ff9c,$f22e9800,$ff60f22e
-	dc.l	$d040ffe8,$4e5e4e75,$4e56ff40,$48ee0303
-	dc.l	$ff9cf22e,$b800ff60,$f22ef0c0,$ffdcf23c
-	dc.l	$90000000,$0000f22e,$44000008,$f22e6800
-	dc.l	$ff6c41ee,$ff6c61ff,$00006166,$1d40ff4e
-	dc.l	$120002ae,$00ff00ff,$ff644280,$102eff63
-	dc.l	$4a016608,$61ff0000,$391c6030,$0c010001
-	dc.l	$660861ff,$00006614,$60220c01,$00026608
-	dc.l	$61ff0000,$66b86014,$0c010003,$660861ff
-	dc.l	$0000643c,$600661ff,$00003b28,$4cee0303
-	dc.l	$ff9cf22e,$9800ff60,$f22ed040,$ffe84e5e
-	dc.l	$4e754e56,$ff4048ee,$0303ff9c,$f22eb800
-	dc.l	$ff60f22e,$f0c0ffdc,$f23c9000,$00000000
-	dc.l	$f22e5400,$0008f22e,$6800ff6c,$41eeff6c
-	dc.l	$61ff0000,$60cc1d40,$ff4e1200,$02ae00ff
-	dc.l	$00ffff64,$4280102e,$ff631d41,$ff4e4a01
-	dc.l	$660861ff,$0000387e,$60300c01,$00016608
-	dc.l	$61ff0000,$65766022,$0c010002,$660861ff
-	dc.l	$0000661a,$60140c01,$00036608,$61ff0000
-	dc.l	$639e6006,$61ff0000,$3a8a4cee,$0303ff9c
-	dc.l	$f22e9800,$ff60f22e,$d040ffe8,$4e5e4e75
-	dc.l	$4e56ff40,$48ee0303,$ff9cf22e,$b800ff60
-	dc.l	$f22ef0c0,$ffdcf23c,$90000000,$000041ee
-	dc.l	$ff6c216e,$00080000,$216e000c,$0004216e
-	dc.l	$00100008,$61ff0000,$60281d40,$ff4e1200
-	dc.l	$02ae00ff,$00ffff64,$4280102e,$ff634a01
-	dc.l	$660861ff,$000037de,$60300c01,$00016608
-	dc.l	$61ff0000,$64d66022,$0c010002,$660861ff
-	dc.l	$0000657a,$60140c01,$00036608,$61ff0000
-	dc.l	$62fe6006,$61ff0000,$39ea4cee,$0303ff9c
-	dc.l	$f22e9800,$ff60f22e,$d040ffe8,$4e5e4e75
-	dc.l	$4e56ff40,$48ee0303,$ff9cf22e,$b800ff60
-	dc.l	$f22ef0c0,$ffdcf23c,$90000000,$0000f22e
-	dc.l	$44000008,$f22e6800,$ff6c41ee,$ff6c61ff
-	dc.l	$00005f8e,$1d40ff4e,$120002ae,$00ff00ff
-	dc.l	$ff644280,$102eff63,$4a016608,$61ff0000
-	dc.l	$39886030,$0c010001,$660861ff,$0000643c
-	dc.l	$60220c01,$00026608,$61ff0000,$603a6014
-	dc.l	$0c010003,$660861ff,$00006264,$600661ff
-	dc.l	$00003a04,$4cee0303,$ff9cf22e,$9800ff60
-	dc.l	$f22ed040,$ffe84e5e,$4e754e56,$ff4048ee
-	dc.l	$0303ff9c,$f22eb800,$ff60f22e,$f0c0ffdc
-	dc.l	$f23c9000,$00000000,$f22e5400,$0008f22e
-	dc.l	$6800ff6c,$41eeff6c,$61ff0000,$5ef41d40
-	dc.l	$ff4e1200,$02ae00ff,$00ffff64,$4280102e
-	dc.l	$ff631d41,$ff4e4a01,$660861ff,$000038ea
-	dc.l	$60300c01,$00016608,$61ff0000,$639e6022
-	dc.l	$0c010002,$660861ff,$00005f9c,$60140c01
-	dc.l	$00036608,$61ff0000,$61c66006,$61ff0000
-	dc.l	$39664cee,$0303ff9c,$f22e9800,$ff60f22e
-	dc.l	$d040ffe8,$4e5e4e75,$4e56ff40,$48ee0303
-	dc.l	$ff9cf22e,$b800ff60,$f22ef0c0,$ffdcf23c
-	dc.l	$90000000,$000041ee,$ff6c216e,$00080000
-	dc.l	$216e000c,$0004216e,$00100008,$61ff0000
-	dc.l	$5e501d40,$ff4e1200,$02ae00ff,$00ffff64
-	dc.l	$4280102e,$ff634a01,$660861ff,$0000384a
-	dc.l	$60300c01,$00016608,$61ff0000,$62fe6022
-	dc.l	$0c010002,$660861ff,$00005efc,$60140c01
-	dc.l	$00036608,$61ff0000,$61266006,$61ff0000
-	dc.l	$38c64cee,$0303ff9c,$f22e9800,$ff60f22e
-	dc.l	$d040ffe8,$4e5e4e75,$4e56ff40,$48ee0303
-	dc.l	$ff9cf22e,$b800ff60,$f22ef0c0,$ffdcf23c
-	dc.l	$90000000,$0000f22e,$44000008,$f22e6800
-	dc.l	$ff6c41ee,$ff6c61ff,$00005db6,$1d40ff4e
-	dc.l	$120002ae,$00ff00ff,$ff644280,$102eff63
-	dc.l	$4a016608,$61ff0000,$51d46030,$0c010001
-	dc.l	$660861ff,$00006264,$60220c01,$00026608
-	dc.l	$61ff0000,$5e626014,$0c010003,$660861ff
-	dc.l	$0000608c,$600661ff,$00005224,$4cee0303
-	dc.l	$ff9cf22e,$9800ff60,$f22ed040,$ffe84e5e
-	dc.l	$4e754e56,$ff4048ee,$0303ff9c,$f22eb800
-	dc.l	$ff60f22e,$f0c0ffdc,$f23c9000,$00000000
-	dc.l	$f22e5400,$0008f22e,$6800ff6c,$41eeff6c
-	dc.l	$61ff0000,$5d1c1d40,$ff4e1200,$02ae00ff
-	dc.l	$00ffff64,$4280102e,$ff631d41,$ff4e4a01
-	dc.l	$660861ff,$00005136,$60300c01,$00016608
-	dc.l	$61ff0000,$61c66022,$0c010002,$660861ff
-	dc.l	$00005dc4,$60140c01,$00036608,$61ff0000
-	dc.l	$5fee6006,$61ff0000,$51864cee,$0303ff9c
-	dc.l	$f22e9800,$ff60f22e,$d040ffe8,$4e5e4e75
-	dc.l	$4e56ff40,$48ee0303,$ff9cf22e,$b800ff60
-	dc.l	$f22ef0c0,$ffdcf23c,$90000000,$000041ee
-	dc.l	$ff6c216e,$00080000,$216e000c,$0004216e
-	dc.l	$00100008,$61ff0000,$5c781d40,$ff4e1200
-	dc.l	$02ae00ff,$00ffff64,$4280102e,$ff634a01
-	dc.l	$660861ff,$00005096,$60300c01,$00016608
-	dc.l	$61ff0000,$61266022,$0c010002,$660861ff
-	dc.l	$00005d24,$60140c01,$00036608,$61ff0000
-	dc.l	$5f4e6006,$61ff0000,$50e64cee,$0303ff9c
-	dc.l	$f22e9800,$ff60f22e,$d040ffe8,$4e5e4e75
-	dc.l	$4e56ff40,$48ee0303,$ff9cf22e,$b800ff60
-	dc.l	$f22ef0c0,$ffdcf23c,$90000000,$0000f22e
-	dc.l	$44000008,$f22e6800,$ff6c41ee,$ff6c61ff
-	dc.l	$00005bde,$1d40ff4e,$120002ae,$00ff00ff
-	dc.l	$ff644280,$102eff63,$4a016608,$61ff0000
-	dc.l	$28066030,$0c010001,$660861ff,$0000608c
-	dc.l	$60220c01,$00026608,$61ff0000,$5c8a6014
-	dc.l	$0c010003,$660861ff,$00005eb4,$600661ff
-	dc.l	$00002938,$4cee0303,$ff9cf22e,$9800ff60
-	dc.l	$f22ed040,$ffe84e5e,$4e754e56,$ff4048ee
-	dc.l	$0303ff9c,$f22eb800,$ff60f22e,$f0c0ffdc
-	dc.l	$f23c9000,$00000000,$f22e5400,$0008f22e
-	dc.l	$6800ff6c,$41eeff6c,$61ff0000,$5b441d40
-	dc.l	$ff4e1200,$02ae00ff,$00ffff64,$4280102e
-	dc.l	$ff631d41,$ff4e4a01,$660861ff,$00002768
-	dc.l	$60300c01,$00016608,$61ff0000,$5fee6022
-	dc.l	$0c010002,$660861ff,$00005bec,$60140c01
-	dc.l	$00036608,$61ff0000,$5e166006,$61ff0000
-	dc.l	$289a4cee,$0303ff9c,$f22e9800,$ff60f22e
-	dc.l	$d040ffe8,$4e5e4e75,$4e56ff40,$48ee0303
-	dc.l	$ff9cf22e,$b800ff60,$f22ef0c0,$ffdcf23c
-	dc.l	$90000000,$000041ee,$ff6c216e,$00080000
-	dc.l	$216e000c,$0004216e,$00100008,$61ff0000
-	dc.l	$5aa01d40,$ff4e1200,$02ae00ff,$00ffff64
-	dc.l	$4280102e,$ff634a01,$660861ff,$000026c8
-	dc.l	$60300c01,$00016608,$61ff0000,$5f4e6022
-	dc.l	$0c010002,$660861ff,$00005b4c,$60140c01
-	dc.l	$00036608,$61ff0000,$5d766006,$61ff0000
-	dc.l	$27fa4cee,$0303ff9c,$f22e9800,$ff60f22e
-	dc.l	$d040ffe8,$4e5e4e75,$4e56ff40,$48ee0303
-	dc.l	$ff9cf22e,$b800ff60,$f22ef0c0,$ffdcf23c
-	dc.l	$90000000,$0000f22e,$44000008,$f22e6800
-	dc.l	$ff6c41ee,$ff6c61ff,$00005a06,$1d40ff4e
-	dc.l	$120002ae,$00ff00ff,$ff644280,$102eff63
-	dc.l	$4a016608,$61ff0000,$39e46030,$0c010001
-	dc.l	$660861ff,$00005f30,$60220c01,$00026608
-	dc.l	$61ff0000,$5f026014,$0c010003,$660861ff
-	dc.l	$00005cdc,$600661ff,$00003b5e,$4cee0303
-	dc.l	$ff9cf22e,$9800ff60,$f22ed040,$ffe84e5e
-	dc.l	$4e754e56,$ff4048ee,$0303ff9c,$f22eb800
-	dc.l	$ff60f22e,$f0c0ffdc,$f23c9000,$00000000
-	dc.l	$f22e5400,$0008f22e,$6800ff6c,$41eeff6c
-	dc.l	$61ff0000,$596c1d40,$ff4e1200,$02ae00ff
-	dc.l	$00ffff64,$4280102e,$ff631d41,$ff4e4a01
-	dc.l	$660861ff,$00003946,$60300c01,$00016608
-	dc.l	$61ff0000,$5e926022,$0c010002,$660861ff
-	dc.l	$00005e64,$60140c01,$00036608,$61ff0000
-	dc.l	$5c3e6006,$61ff0000,$3ac04cee,$0303ff9c
-	dc.l	$f22e9800,$ff60f22e,$d040ffe8,$4e5e4e75
-	dc.l	$4e56ff40,$48ee0303,$ff9cf22e,$b800ff60
-	dc.l	$f22ef0c0,$ffdcf23c,$90000000,$000041ee
-	dc.l	$ff6c216e,$00080000,$216e000c,$0004216e
-	dc.l	$00100008,$61ff0000,$58c81d40,$ff4e1200
-	dc.l	$02ae00ff,$00ffff64,$4280102e,$ff634a01
-	dc.l	$660861ff,$000038a6,$60300c01,$00016608
-	dc.l	$61ff0000,$5df26022,$0c010002,$660861ff
-	dc.l	$00005dc4,$60140c01,$00036608,$61ff0000
-	dc.l	$5b9e6006,$61ff0000,$3a204cee,$0303ff9c
-	dc.l	$f22e9800,$ff60f22e,$d040ffe8,$4e5e4e75
-	dc.l	$4e56ff40,$48ee0303,$ff9cf22e,$b800ff60
-	dc.l	$f22ef0c0,$ffdcf23c,$90000000,$0000f22e
-	dc.l	$44000008,$f22e6800,$ff6c41ee,$ff6c61ff
-	dc.l	$0000582e,$1d40ff4e,$120002ae,$00ff00ff
-	dc.l	$ff644280,$102eff63,$4a016608,$61ff0000
-	dc.l	$522e6030,$0c010001,$660861ff,$00005d58
-	dc.l	$60220c01,$00026608,$61ff0000,$5d2a6014
-	dc.l	$0c010003,$660861ff,$00005b04,$600661ff
-	dc.l	$000052d6,$4cee0303,$ff9cf22e,$9800ff60
-	dc.l	$f22ed040,$ffe84e5e,$4e754e56,$ff4048ee
-	dc.l	$0303ff9c,$f22eb800,$ff60f22e,$f0c0ffdc
-	dc.l	$f23c9000,$00000000,$f22e5400,$0008f22e
-	dc.l	$6800ff6c,$41eeff6c,$61ff0000,$57941d40
-	dc.l	$ff4e1200,$02ae00ff,$00ffff64,$4280102e
-	dc.l	$ff631d41,$ff4e4a01,$660861ff,$00005190
-	dc.l	$60300c01,$00016608,$61ff0000,$5cba6022
-	dc.l	$0c010002,$660861ff,$00005c8c,$60140c01
-	dc.l	$00036608,$61ff0000,$5a666006,$61ff0000
-	dc.l	$52384cee,$0303ff9c,$f22e9800,$ff60f22e
-	dc.l	$d040ffe8,$4e5e4e75,$4e56ff40,$48ee0303
-	dc.l	$ff9cf22e,$b800ff60,$f22ef0c0,$ffdcf23c
-	dc.l	$90000000,$000041ee,$ff6c216e,$00080000
-	dc.l	$216e000c,$0004216e,$00100008,$61ff0000
-	dc.l	$56f01d40,$ff4e1200,$02ae00ff,$00ffff64
-	dc.l	$4280102e,$ff634a01,$660861ff,$000050f0
-	dc.l	$60300c01,$00016608,$61ff0000,$5c1a6022
-	dc.l	$0c010002,$660861ff,$00005bec,$60140c01
-	dc.l	$00036608,$61ff0000,$59c66006,$61ff0000
-	dc.l	$51984cee,$0303ff9c,$f22e9800,$ff60f22e
-	dc.l	$d040ffe8,$4e5e4e75,$4e56ff40,$48ee0303
-	dc.l	$ff9cf22e,$b800ff60,$f22ef0c0,$ffdcf23c
-	dc.l	$90000000,$0000f22e,$44000008,$f22e6800
-	dc.l	$ff6c41ee,$ff6c61ff,$00005656,$1d40ff4e
-	dc.l	$120002ae,$00ff00ff,$ff644280,$102eff63
-	dc.l	$4a016608,$61ff0000,$514e6030,$0c010001
-	dc.l	$660861ff,$00005b80,$60220c01,$00026608
-	dc.l	$61ff0000,$5b526014,$0c010003,$660861ff
-	dc.l	$0000592c,$600661ff,$0000524c,$4cee0303
-	dc.l	$ff9cf22e,$9800ff60,$f22ed040,$ffe84e5e
-	dc.l	$4e754e56,$ff4048ee,$0303ff9c,$f22eb800
-	dc.l	$ff60f22e,$f0c0ffdc,$f23c9000,$00000000
-	dc.l	$f22e5400,$0008f22e,$6800ff6c,$41eeff6c
-	dc.l	$61ff0000,$55bc1d40,$ff4e1200,$02ae00ff
-	dc.l	$00ffff64,$4280102e,$ff631d41,$ff4e4a01
-	dc.l	$660861ff,$000050b0,$60300c01,$00016608
-	dc.l	$61ff0000,$5ae26022,$0c010002,$660861ff
-	dc.l	$00005ab4,$60140c01,$00036608,$61ff0000
-	dc.l	$588e6006,$61ff0000,$51ae4cee,$0303ff9c
-	dc.l	$f22e9800,$ff60f22e,$d040ffe8,$4e5e4e75
-	dc.l	$4e56ff40,$48ee0303,$ff9cf22e,$b800ff60
-	dc.l	$f22ef0c0,$ffdcf23c,$90000000,$000041ee
-	dc.l	$ff6c216e,$00080000,$216e000c,$0004216e
-	dc.l	$00100008,$61ff0000,$55181d40,$ff4e1200
-	dc.l	$02ae00ff,$00ffff64,$4280102e,$ff634a01
-	dc.l	$660861ff,$00005010,$60300c01,$00016608
-	dc.l	$61ff0000,$5a426022,$0c010002,$660861ff
-	dc.l	$00005a14,$60140c01,$00036608,$61ff0000
-	dc.l	$57ee6006,$61ff0000,$510e4cee,$0303ff9c
-	dc.l	$f22e9800,$ff60f22e,$d040ffe8,$4e5e4e75
-	dc.l	$4e56ff40,$48ee0303,$ff9cf22e,$b800ff60
-	dc.l	$f22ef0c0,$ffdcf23c,$90000000,$0000f22e
-	dc.l	$44000008,$f22e6800,$ff6c41ee,$ff6c61ff
-	dc.l	$0000547e,$1d40ff4e,$120002ae,$00ff00ff
-	dc.l	$ff644280,$102eff63,$4a016608,$61ff0000
-	dc.l	$45026030,$0c010001,$660861ff,$000054c8
-	dc.l	$60220c01,$00026608,$61ff0000,$59826014
-	dc.l	$0c010003,$660861ff,$00005754,$600661ff
-	dc.l	$00004682,$4cee0303,$ff9cf22e,$9800ff60
-	dc.l	$f22ed040,$ffe84e5e,$4e754e56,$ff4048ee
-	dc.l	$0303ff9c,$f22eb800,$ff60f22e,$f0c0ffdc
-	dc.l	$f23c9000,$00000000,$f22e5400,$0008f22e
-	dc.l	$6800ff6c,$41eeff6c,$61ff0000,$53e41d40
-	dc.l	$ff4e1200,$02ae00ff,$00ffff64,$4280102e
-	dc.l	$ff631d41,$ff4e4a01,$660861ff,$00004464
-	dc.l	$60300c01,$00016608,$61ff0000,$542a6022
-	dc.l	$0c010002,$660861ff,$000058e4,$60140c01
-	dc.l	$00036608,$61ff0000,$56b66006,$61ff0000
-	dc.l	$45e44cee,$0303ff9c,$f22e9800,$ff60f22e
-	dc.l	$d040ffe8,$4e5e4e75,$4e56ff40,$48ee0303
-	dc.l	$ff9cf22e,$b800ff60,$f22ef0c0,$ffdcf23c
-	dc.l	$90000000,$000041ee,$ff6c216e,$00080000
-	dc.l	$216e000c,$0004216e,$00100008,$61ff0000
-	dc.l	$53401d40,$ff4e1200,$02ae00ff,$00ffff64
-	dc.l	$4280102e,$ff634a01,$660861ff,$000043c4
-	dc.l	$60300c01,$00016608,$61ff0000,$538a6022
-	dc.l	$0c010002,$660861ff,$00005844,$60140c01
-	dc.l	$00036608,$61ff0000,$56166006,$61ff0000
-	dc.l	$45444cee,$0303ff9c,$f22e9800,$ff60f22e
-	dc.l	$d040ffe8,$4e5e4e75,$4e56ff40,$48ee0303
-	dc.l	$ff9cf22e,$b800ff60,$f22ef0c0,$ffdcf23c
-	dc.l	$90000000,$0000f22e,$44000008,$f22e6800
-	dc.l	$ff6c41ee,$ff6c61ff,$000052a6,$1d40ff4e
-	dc.l	$120002ae,$00ff00ff,$ff644280,$102eff63
-	dc.l	$4a016608,$61ff0000,$476c6030,$0c010001
-	dc.l	$660861ff,$000052f0,$60220c01,$00026608
-	dc.l	$61ff0000,$57aa6014,$0c010003,$660861ff
-	dc.l	$0000557c,$600661ff,$0000476a,$4cee0303
-	dc.l	$ff9cf22e,$9800ff60,$f22ed040,$ffe84e5e
-	dc.l	$4e754e56,$ff4048ee,$0303ff9c,$f22eb800
-	dc.l	$ff60f22e,$f0c0ffdc,$f23c9000,$00000000
-	dc.l	$f22e5400,$0008f22e,$6800ff6c,$41eeff6c
-	dc.l	$61ff0000,$520c1d40,$ff4e1200,$02ae00ff
-	dc.l	$00ffff64,$4280102e,$ff631d41,$ff4e4a01
-	dc.l	$660861ff,$000046ce,$60300c01,$00016608
-	dc.l	$61ff0000,$52526022,$0c010002,$660861ff
-	dc.l	$0000570c,$60140c01,$00036608,$61ff0000
-	dc.l	$54de6006,$61ff0000,$46cc4cee,$0303ff9c
-	dc.l	$f22e9800,$ff60f22e,$d040ffe8,$4e5e4e75
-	dc.l	$4e56ff40,$48ee0303,$ff9cf22e,$b800ff60
-	dc.l	$f22ef0c0,$ffdcf23c,$90000000,$000041ee
-	dc.l	$ff6c216e,$00080000,$216e000c,$0004216e
-	dc.l	$00100008,$61ff0000,$51681d40,$ff4e1200
-	dc.l	$02ae00ff,$00ffff64,$4280102e,$ff634a01
-	dc.l	$660861ff,$0000462e,$60300c01,$00016608
-	dc.l	$61ff0000,$51b26022,$0c010002,$660861ff
-	dc.l	$0000566c,$60140c01,$00036608,$61ff0000
-	dc.l	$543e6006,$61ff0000,$462c4cee,$0303ff9c
-	dc.l	$f22e9800,$ff60f22e,$d040ffe8,$4e5e4e75
-	dc.l	$4e56ff40,$48ee0303,$ff9cf22e,$b800ff60
-	dc.l	$f22ef0c0,$ffdcf23c,$90000000,$0000f22e
-	dc.l	$44000008,$f22e6800,$ff6c41ee,$ff6c61ff
-	dc.l	$000050ce,$1d40ff4e,$120002ae,$00ff00ff
-	dc.l	$ff644280,$102eff63,$4a016608,$61ff0000
-	dc.l	$45e46030,$0c010001,$660861ff,$00005118
-	dc.l	$60220c01,$00026608,$61ff0000,$55d26014
-	dc.l	$0c010003,$660861ff,$000053a4,$600661ff
-	dc.l	$0000460c,$4cee0303,$ff9cf22e,$9800ff60
-	dc.l	$f22ed040,$ffe84e5e,$4e754e56,$ff4048ee
-	dc.l	$0303ff9c,$f22eb800,$ff60f22e,$f0c0ffdc
-	dc.l	$f23c9000,$00000000,$f22e5400,$0008f22e
-	dc.l	$6800ff6c,$41eeff6c,$61ff0000,$50341d40
-	dc.l	$ff4e1200,$02ae00ff,$00ffff64,$4280102e
-	dc.l	$ff631d41,$ff4e4a01,$660861ff,$00004546
-	dc.l	$60300c01,$00016608,$61ff0000,$507a6022
-	dc.l	$0c010002,$660861ff,$00005534,$60140c01
-	dc.l	$00036608,$61ff0000,$53066006,$61ff0000
-	dc.l	$456e4cee,$0303ff9c,$f22e9800,$ff60f22e
-	dc.l	$d040ffe8,$4e5e4e75,$4e56ff40,$48ee0303
-	dc.l	$ff9cf22e,$b800ff60,$f22ef0c0,$ffdcf23c
-	dc.l	$90000000,$000041ee,$ff6c216e,$00080000
-	dc.l	$216e000c,$0004216e,$00100008,$61ff0000
-	dc.l	$4f901d40,$ff4e1200,$02ae00ff,$00ffff64
-	dc.l	$4280102e,$ff634a01,$660861ff,$000044a6
-	dc.l	$60300c01,$00016608,$61ff0000,$4fda6022
-	dc.l	$0c010002,$660861ff,$00005494,$60140c01
-	dc.l	$00036608,$61ff0000,$52666006,$61ff0000
-	dc.l	$44ce4cee,$0303ff9c,$f22e9800,$ff60f22e
-	dc.l	$d040ffe8,$4e5e4e75,$4e56ff40,$48ee0303
-	dc.l	$ff9cf22e,$b800ff60,$f22ef0c0,$ffdcf23c
-	dc.l	$90000000,$0000f22e,$44000008,$f22e6800
-	dc.l	$ff6c41ee,$ff6c61ff,$00004ef6,$1d40ff4e
-	dc.l	$120002ae,$00ff00ff,$ff644280,$102eff63
-	dc.l	$4a016608,$61ff0000,$33da6030,$0c010001
-	dc.l	$660861ff,$00005420,$60220c01,$00026608
-	dc.l	$61ff0000,$53ca6014,$0c010003,$660861ff
-	dc.l	$000051cc,$600661ff,$0000344c,$4cee0303
-	dc.l	$ff9cf22e,$9800ff60,$f22ed040,$ffe84e5e
-	dc.l	$4e754e56,$ff4048ee,$0303ff9c,$f22eb800
-	dc.l	$ff60f22e,$f0c0ffdc,$f23c9000,$00000000
-	dc.l	$f22e5400,$0008f22e,$6800ff6c,$41eeff6c
-	dc.l	$61ff0000,$4e5c1d40,$ff4e1200,$02ae00ff
-	dc.l	$00ffff64,$4280102e,$ff631d41,$ff4e4a01
-	dc.l	$660861ff,$0000333c,$60300c01,$00016608
-	dc.l	$61ff0000,$53826022,$0c010002,$660861ff
-	dc.l	$0000532c,$60140c01,$00036608,$61ff0000
-	dc.l	$512e6006,$61ff0000,$33ae4cee,$0303ff9c
-	dc.l	$f22e9800,$ff60f22e,$d040ffe8,$4e5e4e75
-	dc.l	$4e56ff40,$48ee0303,$ff9cf22e,$b800ff60
-	dc.l	$f22ef0c0,$ffdcf23c,$90000000,$000041ee
-	dc.l	$ff6c216e,$00080000,$216e000c,$0004216e
-	dc.l	$00100008,$61ff0000,$4db81d40,$ff4e1200
-	dc.l	$02ae00ff,$00ffff64,$4280102e,$ff634a01
-	dc.l	$660861ff,$0000329c,$60300c01,$00016608
-	dc.l	$61ff0000,$52e26022,$0c010002,$660861ff
-	dc.l	$0000528c,$60140c01,$00036608,$61ff0000
-	dc.l	$508e6006,$61ff0000,$330e4cee,$0303ff9c
-	dc.l	$f22e9800,$ff60f22e,$d040ffe8,$4e5e4e75
-	dc.l	$4e56ff40,$48ee0303,$ff9cf22e,$b800ff60
-	dc.l	$f22ef0c0,$ffdcf23c,$90000000,$0000f22e
-	dc.l	$44000008,$f22e6800,$ff6c41ee,$ff6c61ff
-	dc.l	$00004d1e,$1d40ff4e,$120002ae,$00ff00ff
-	dc.l	$ff644280,$102eff63,$4a016608,$61ff0000
-	dc.l	$27cc6030,$0c010001,$660861ff,$00005284
-	dc.l	$60220c01,$00026608,$61ff0000,$4dca6014
-	dc.l	$0c010003,$660861ff,$00004ff4,$600661ff
-	dc.l	$0000282a,$4cee0303,$ff9cf22e,$9800ff60
-	dc.l	$f22ed040,$ffe84e5e,$4e754e56,$ff4048ee
-	dc.l	$0303ff9c,$f22eb800,$ff60f22e,$f0c0ffdc
-	dc.l	$f23c9000,$00000000,$f22e5400,$0008f22e
-	dc.l	$6800ff6c,$41eeff6c,$61ff0000,$4c841d40
-	dc.l	$ff4e1200,$02ae00ff,$00ffff64,$4280102e
-	dc.l	$ff631d41,$ff4e4a01,$660861ff,$0000272e
-	dc.l	$60300c01,$00016608,$61ff0000,$51e66022
-	dc.l	$0c010002,$660861ff,$00004d2c,$60140c01
-	dc.l	$00036608,$61ff0000,$4f566006,$61ff0000
-	dc.l	$278c4cee,$0303ff9c,$f22e9800,$ff60f22e
-	dc.l	$d040ffe8,$4e5e4e75,$4e56ff40,$48ee0303
-	dc.l	$ff9cf22e,$b800ff60,$f22ef0c0,$ffdcf23c
-	dc.l	$90000000,$000041ee,$ff6c216e,$00080000
-	dc.l	$216e000c,$0004216e,$00100008,$61ff0000
-	dc.l	$4be01d40,$ff4e1200,$02ae00ff,$00ffff64
-	dc.l	$4280102e,$ff634a01,$660861ff,$0000268e
-	dc.l	$60300c01,$00016608,$61ff0000,$51466022
-	dc.l	$0c010002,$660861ff,$00004c8c,$60140c01
-	dc.l	$00036608,$61ff0000,$4eb66006,$61ff0000
-	dc.l	$26ec4cee,$0303ff9c,$f22e9800,$ff60f22e
-	dc.l	$d040ffe8,$4e5e4e75,$4e56ff40,$48ee0303
-	dc.l	$ff9cf22e,$b800ff60,$f22ef0c0,$ffdcf23c
-	dc.l	$90000000,$0000f22e,$44000008,$f22e6800
-	dc.l	$ff6c41ee,$ff6c61ff,$00004b46,$1d40ff4e
-	dc.l	$120002ae,$00ff00ff,$ff644280,$102eff63
-	dc.l	$4a016608,$61ff0000,$2fb06030,$0c010001
-	dc.l	$660861ff,$00004ff4,$60220c01,$00026608
-	dc.l	$61ff0000,$4bf26014,$0c010003,$660861ff
-	dc.l	$00004e1c,$600661ff,$00002f9a,$4cee0303
-	dc.l	$ff9cf22e,$9800ff60,$f22ed040,$ffe84e5e
-	dc.l	$4e754e56,$ff4048ee,$0303ff9c,$f22eb800
-	dc.l	$ff60f22e,$f0c0ffdc,$f23c9000,$00000000
-	dc.l	$f22e5400,$0008f22e,$6800ff6c,$41eeff6c
-	dc.l	$61ff0000,$4aac1d40,$ff4e1200,$02ae00ff
-	dc.l	$00ffff64,$4280102e,$ff631d41,$ff4e4a01
-	dc.l	$660861ff,$00002f12,$60300c01,$00016608
-	dc.l	$61ff0000,$4f566022,$0c010002,$660861ff
-	dc.l	$00004b54,$60140c01,$00036608,$61ff0000
-	dc.l	$4d7e6006,$61ff0000,$2efc4cee,$0303ff9c
-	dc.l	$f22e9800,$ff60f22e,$d040ffe8,$4e5e4e75
-	dc.l	$4e56ff40,$48ee0303,$ff9cf22e,$b800ff60
-	dc.l	$f22ef0c0,$ffdcf23c,$90000000,$000041ee
-	dc.l	$ff6c216e,$00080000,$216e000c,$0004216e
-	dc.l	$00100008,$61ff0000,$4a081d40,$ff4e1200
-	dc.l	$02ae00ff,$00ffff64,$4280102e,$ff634a01
-	dc.l	$660861ff,$00002e72,$60300c01,$00016608
-	dc.l	$61ff0000,$4eb66022,$0c010002,$660861ff
-	dc.l	$00004ab4,$60140c01,$00036608,$61ff0000
-	dc.l	$4cde6006,$61ff0000,$2e5c4cee,$0303ff9c
-	dc.l	$f22e9800,$ff60f22e,$d040ffe8,$4e5e4e75
-	dc.l	$4e56ff40,$48ee0303,$ff9cf22e,$b800ff60
-	dc.l	$f22ef0c0,$ffdcf23c,$90000000,$0000f22e
-	dc.l	$44000008,$f22e6800,$ff6c41ee,$ff6c61ff
-	dc.l	$0000496e,$1d40ff4e,$120002ae,$00ff00ff
-	dc.l	$ff644280,$102eff63,$4a016608,$61ff0000
-	dc.l	$2e0c6030,$0c010001,$660861ff,$00004e1c
-	dc.l	$60220c01,$00026608,$61ff0000,$4a1a6014
-	dc.l	$0c010003,$660861ff,$00004c44,$600661ff
-	dc.l	$00002e08,$4cee0303,$ff9cf22e,$9800ff60
-	dc.l	$f22ed040,$ffe84e5e,$4e754e56,$ff4048ee
-	dc.l	$0303ff9c,$f22eb800,$ff60f22e,$f0c0ffdc
-	dc.l	$f23c9000,$00000000,$f22e5400,$0008f22e
-	dc.l	$6800ff6c,$41eeff6c,$61ff0000,$48d41d40
-	dc.l	$ff4e1200,$02ae00ff,$00ffff64,$4280102e
-	dc.l	$ff631d41,$ff4e4a01,$660861ff,$00002d6e
-	dc.l	$60300c01,$00016608,$61ff0000,$4d7e6022
-	dc.l	$0c010002,$660861ff,$0000497c,$60140c01
-	dc.l	$00036608,$61ff0000,$4ba66006,$61ff0000
-	dc.l	$2d6a4cee,$0303ff9c,$f22e9800,$ff60f22e
-	dc.l	$d040ffe8,$4e5e4e75,$4e56ff40,$48ee0303
-	dc.l	$ff9cf22e,$b800ff60,$f22ef0c0,$ffdcf23c
-	dc.l	$90000000,$000041ee,$ff6c216e,$00080000
-	dc.l	$216e000c,$0004216e,$00100008,$61ff0000
-	dc.l	$48301d40,$ff4e1200,$02ae00ff,$00ffff64
-	dc.l	$4280102e,$ff634a01,$660861ff,$00002cce
-	dc.l	$60300c01,$00016608,$61ff0000,$4cde6022
-	dc.l	$0c010002,$660861ff,$000048dc,$60140c01
-	dc.l	$00036608,$61ff0000,$4b066006,$61ff0000
-	dc.l	$2cca4cee,$0303ff9c,$f22e9800,$ff60f22e
-	dc.l	$d040ffe8,$4e5e4e75,$4e56ff40,$48ee0303
-	dc.l	$ff9cf22e,$b800ff60,$f22ef0c0,$ffdcf23c
-	dc.l	$90000000,$0000f22e,$44000008,$f22e6800
-	dc.l	$ff6c41ee,$ff6c61ff,$00004796,$1d40ff4e
-	dc.l	$120002ae,$00ff00ff,$ff644280,$102eff63
-	dc.l	$4a016608,$61ff0000,$0af46030,$0c010001
-	dc.l	$660861ff,$00004d18,$60220c01,$00026608
-	dc.l	$61ff0000,$4d386014,$0c010003,$660861ff
-	dc.l	$00004d34,$600661ff,$00000d58,$4cee0303
-	dc.l	$ff9cf22e,$9800ff60,$f227e003,$f21fd040
-	dc.l	$f21fd080,$4e5e4e75,$4e56ff40,$48ee0303
-	dc.l	$ff9cf22e,$b800ff60,$f22ef0c0,$ffdcf23c
-	dc.l	$90000000,$0000f22e,$54000008,$f22e6800
-	dc.l	$ff6c41ee,$ff6c61ff,$000046f6,$1d40ff4e
-	dc.l	$120002ae,$00ff00ff,$ff644280,$102eff63
-	dc.l	$1d41ff4e,$4a016608,$61ff0000,$0a506030
-	dc.l	$0c010001,$660861ff,$00004c74,$60220c01
-	dc.l	$00026608,$61ff0000,$4c946014,$0c010003
-	dc.l	$660861ff,$00004c90,$600661ff,$00000cb4
-	dc.l	$4cee0303,$ff9cf22e,$9800ff60,$f227e003
-	dc.l	$f21fd040,$f21fd080,$4e5e4e75,$4e56ff40
-	dc.l	$48ee0303,$ff9cf22e,$b800ff60,$f22ef0c0
-	dc.l	$ffdcf23c,$90000000,$000041ee,$ff6c216e
-	dc.l	$00080000,$216e000c,$0004216e,$00100008
-	dc.l	$61ff0000,$464c1d40,$ff4e1200,$02ae00ff
-	dc.l	$00ffff64,$4280102e,$ff634a01,$660861ff
-	dc.l	$000009aa,$60300c01,$00016608,$61ff0000
-	dc.l	$4bce6022,$0c010002,$660861ff,$00004bee
-	dc.l	$60140c01,$00036608,$61ff0000,$4bea6006
-	dc.l	$61ff0000,$0c0e4cee,$0303ff9c,$f22e9800
-	dc.l	$ff60f227,$e003f21f,$d040f21f,$d0804e5e
-	dc.l	$4e754e56,$ff4048ee,$0303ff9c,$f22eb800
-	dc.l	$ff60f22e,$f0c0ffdc,$f23c9000,$00000000
-	dc.l	$f22e4400,$0008f22e,$6800ff78,$41eeff78
-	dc.l	$61ff0000,$45ac1d40,$ff4ff22e,$4400000c
-	dc.l	$f22e6800,$ff6c41ee,$ff6c61ff,$00004592
-	dc.l	$1d40ff4e,$220002ae,$00ff00ff,$ff644280
-	dc.l	$102eff63,$41eeff6c,$43eeff78,$4a016608
-	dc.l	$61ff0000,$4c466030,$0c010001,$660861ff
-	dc.l	$00004c64,$60220c01,$00026608,$61ff0000
-	dc.l	$4c846014,$0c010003,$660861ff,$00004d16
-	dc.l	$600661ff,$00004c14,$4cee0303,$ff9cf22e
-	dc.l	$9800ff60,$f22ed040,$ffe84e5e,$4e754e56
-	dc.l	$ff4048ee,$0303ff9c,$f22eb800,$ff60f22e
-	dc.l	$f0c0ffdc,$f23c9000,$00000000,$f22e5400
-	dc.l	$0008f22e,$6800ff78,$41eeff78,$61ff0000
-	dc.l	$44f01d40,$ff4ff22e,$54000010,$f22e6800
-	dc.l	$ff6c41ee,$ff6c61ff,$000044d6,$1d40ff4e
-	dc.l	$220002ae,$00ff00ff,$ff644280,$102eff63
-	dc.l	$41eeff6c,$43eeff78,$4a016608,$61ff0000
-	dc.l	$4b8a6030,$0c010001,$660861ff,$00004ba8
-	dc.l	$60220c01,$00026608,$61ff0000,$4bc86014
-	dc.l	$0c010003,$660861ff,$00004c5a,$600661ff
-	dc.l	$00004b58,$4cee0303,$ff9cf22e,$9800ff60
-	dc.l	$f22ed040,$ffe84e5e,$4e754e56,$ff4048ee
-	dc.l	$0303ff9c,$f22eb800,$ff60f22e,$f0c0ffdc
-	dc.l	$f23c9000,$00000000,$41eeff78,$216e0008
-	dc.l	$0000216e,$000c0004,$216e0010,$000861ff
-	dc.l	$0000442e,$1d40ff4f,$41eeff6c,$216e0014
-	dc.l	$0000216e,$00180004,$216e001c,$000861ff
-	dc.l	$0000440e,$1d40ff4e,$220002ae,$00ff00ff
-	dc.l	$ff644280,$102eff63,$41eeff6c,$43eeff78
-	dc.l	$4a016608,$61ff0000,$4ac26030,$0c010001
-	dc.l	$660861ff,$00004ae0,$60220c01,$00026608
-	dc.l	$61ff0000,$4b006014,$0c010003,$660861ff
-	dc.l	$00004b92,$600661ff,$00004a90,$4cee0303
-	dc.l	$ff9cf22e,$9800ff60,$f22ed040,$ffe84e5e
-	dc.l	$4e754e56,$ff4048ee,$0303ff9c,$f22eb800
-	dc.l	$ff60f22e,$f0c0ffdc,$f23c9000,$00000000
-	dc.l	$f22e4400,$0008f22e,$6800ff78,$41eeff78
-	dc.l	$61ff0000,$436c1d40,$ff4ff22e,$4400000c
-	dc.l	$f22e6800,$ff6c41ee,$ff6c61ff,$00004352
-	dc.l	$1d40ff4e,$220002ae,$00ff00ff,$ff644280
-	dc.l	$102eff63,$41eeff6c,$43eeff78,$4a016608
-	dc.l	$61ff0000,$491c6030,$0c010001,$660861ff
-	dc.l	$0000493a,$60220c01,$00026608,$61ff0000
-	dc.l	$495a6014,$0c010003,$660861ff,$00004ad6
-	dc.l	$600661ff,$000048ea,$4cee0303,$ff9cf22e
-	dc.l	$9800ff60,$f22ed040,$ffe84e5e,$4e754e56
-	dc.l	$ff4048ee,$0303ff9c,$f22eb800,$ff60f22e
-	dc.l	$f0c0ffdc,$f23c9000,$00000000,$f22e5400
-	dc.l	$0008f22e,$6800ff78,$41eeff78,$61ff0000
-	dc.l	$42b01d40,$ff4ff22e,$54000010,$f22e6800
-	dc.l	$ff6c41ee,$ff6c61ff,$00004296,$1d40ff4e
-	dc.l	$220002ae,$00ff00ff,$ff644280,$102eff63
-	dc.l	$41eeff6c,$43eeff78,$4a016608,$61ff0000
-	dc.l	$48606030,$0c010001,$660861ff,$0000487e
-	dc.l	$60220c01,$00026608,$61ff0000,$489e6014
-	dc.l	$0c010003,$660861ff,$00004a1a,$600661ff
-	dc.l	$0000482e,$4cee0303,$ff9cf22e,$9800ff60
-	dc.l	$f22ed040,$ffe84e5e,$4e754e56,$ff4048ee
-	dc.l	$0303ff9c,$f22eb800,$ff60f22e,$f0c0ffdc
-	dc.l	$f23c9000,$00000000,$41eeff78,$216e0008
-	dc.l	$0000216e,$000c0004,$216e0010,$000861ff
-	dc.l	$000041ee,$1d40ff4f,$41eeff6c,$216e0014
-	dc.l	$0000216e,$00180004,$216e001c,$000861ff
-	dc.l	$000041ce,$1d40ff4e,$220002ae,$00ff00ff
-	dc.l	$ff644280,$102eff63,$41eeff6c,$43eeff78
-	dc.l	$4a016608,$61ff0000,$47986030,$0c010001
-	dc.l	$660861ff,$000047b6,$60220c01,$00026608
-	dc.l	$61ff0000,$47d66014,$0c010003,$660861ff
-	dc.l	$00004952,$600661ff,$00004766,$4cee0303
-	dc.l	$ff9cf22e,$9800ff60,$f22ed040,$ffe84e5e
-	dc.l	$4e754e56,$ff4048ee,$0303ff9c,$f22eb800
-	dc.l	$ff60f22e,$f0c0ffdc,$f23c9000,$00000000
-	dc.l	$f22e4400,$0008f22e,$6800ff78,$41eeff78
-	dc.l	$61ff0000,$412c1d40,$ff4ff22e,$4400000c
-	dc.l	$f22e6800,$ff6c41ee,$ff6c61ff,$00004112
-	dc.l	$1d40ff4e,$220002ae,$00ff00ff,$ff644280
-	dc.l	$102eff63,$41eeff6c,$43eeff78,$4a016608
-	dc.l	$61ff0000,$484a6030,$0c010001,$660861ff
-	dc.l	$0000486a,$60220c01,$00026608,$61ff0000
-	dc.l	$488a6014,$0c010003,$660861ff,$00004896
-	dc.l	$600661ff,$00004818,$4cee0303,$ff9cf22e
-	dc.l	$9800ff60,$f22ed040,$ffe84e5e,$4e754e56
-	dc.l	$ff4048ee,$0303ff9c,$f22eb800,$ff60f22e
-	dc.l	$f0c0ffdc,$f23c9000,$00000000,$f22e5400
-	dc.l	$0008f22e,$6800ff78,$41eeff78,$61ff0000
-	dc.l	$40701d40,$ff4ff22e,$54000010,$f22e6800
-	dc.l	$ff6c41ee,$ff6c61ff,$00004056,$1d40ff4e
-	dc.l	$220002ae,$00ff00ff,$ff644280,$102eff63
-	dc.l	$41eeff6c,$43eeff78,$4a016608,$61ff0000
-	dc.l	$478e6030,$0c010001,$660861ff,$000047ae
-	dc.l	$60220c01,$00026608,$61ff0000,$47ce6014
-	dc.l	$0c010003,$660861ff,$000047da,$600661ff
-	dc.l	$0000475c,$4cee0303,$ff9cf22e,$9800ff60
-	dc.l	$f22ed040,$ffe84e5e,$4e754e56,$ff4048ee
-	dc.l	$0303ff9c,$f22eb800,$ff60f22e,$f0c0ffdc
-	dc.l	$f23c9000,$00000000,$41eeff78,$216e0008
-	dc.l	$0000216e,$000c0004,$216e0010,$000861ff
-	dc.l	$00003fae,$1d40ff4f,$41eeff6c,$216e0014
-	dc.l	$0000216e,$00180004,$216e001c,$000861ff
-	dc.l	$00003f8e,$1d40ff4e,$220002ae,$00ff00ff
-	dc.l	$ff644280,$102eff63,$41eeff6c,$43eeff78
-	dc.l	$4a016608,$61ff0000,$46c66030,$0c010001
-	dc.l	$660861ff,$000046e6,$60220c01,$00026608
-	dc.l	$61ff0000,$47066014,$0c010003,$660861ff
-	dc.l	$00004712,$600661ff,$00004694,$4cee0303
-	dc.l	$ff9cf22e,$9800ff60,$f22ed040,$ffe84e5e
-	dc.l	$4e75bd6a,$aa77ccc9,$94f53de6,$12097aae
-	dc.l	$8da1be5a,$e6452a11,$8ae43ec7,$1de3a534
-	dc.l	$1531bf2a,$01a01a01,$8b590000,$00000000
-	dc.l	$00003ff8,$00008888,$88888888,$59af0000
-	dc.l	$0000bffc,$0000aaaa,$aaaaaaaa,$aa990000
-	dc.l	$00003d2a,$c4d0d601,$1ee3bda9,$396f9f45
-	dc.l	$ac193e21,$eed90612,$c972be92,$7e4fb79d
-	dc.l	$9fcf3efa,$01a01a01,$d4230000,$00000000
-	dc.l	$0000bff5,$0000b60b,$60b60b61,$d4380000
-	dc.l	$00003ffa,$0000aaaa,$aaaaaaaa,$ab5ebf00
-	dc.l	$00002d7c,$00000000,$ff5c6008,$2d7c0000
-	dc.l	$0001ff5c,$f2104800,$f22e6800,$ff842210
-	dc.l	$32280004,$02817fff,$ffff0c81,$3fd78000
-	dc.l	$6c046000,$01780c81,$4004bc7e,$6d046000
-	dc.l	$0468f200,$0080f23a,$54a3d186,$43fb0170
-	dc.l	$00000866,$f22e6080,$ff58222e,$ff58e981
-	dc.l	$d3c1f219,$4828f211,$4428222e,$ff58d2ae
-	dc.l	$ff5ce299,$0c810000,$00006d00,$0088f227
-	dc.l	$e00cf22e,$6800ff84,$f2000023,$f23a5580
-	dc.l	$fed2f23a,$5500fed4,$f2000080,$f20004a3
-	dc.l	$e2990281,$80000000,$b3aeff84,$f20005a3
-	dc.l	$f2000523,$f23a55a2,$febaf23a,$5522febc
-	dc.l	$f20005a3,$f2000523,$f23a55a2,$feb6f23a
-	dc.l	$4922fec0,$f2000ca3,$f2000123,$f23a48a2
-	dc.l	$fec2f22e,$4823ff84,$f20008a2,$f2000423
-	dc.l	$f21fd030,$f2009000,$f22e4822,$ff8460ff
-	dc.l	$00004006,$f227e00c,$f2000023,$f23a5500
-	dc.l	$fea2f23a,$5580fea4,$f2000080,$f20004a3
-	dc.l	$f22e6800,$ff84e299,$02818000,$0000f200
-	dc.l	$0523b3ae,$ff840281,$80000000,$f20005a3
-	dc.l	$00813f80,$00002d41,$ff54f23a,$5522fe74
-	dc.l	$f23a55a2,$fe76f200,$0523f200,$05a3f23a
-	dc.l	$5522fe70,$f23a49a2,$fe7af200,$0523f200
-	dc.l	$0ca3f23a,$4922fe7c,$f23a44a2,$fe82f200
-	dc.l	$0823f200,$0422f22e,$4823ff84,$f21fd030
-	dc.l	$f2009000,$f22e4422,$ff5460ff,$00003f6a
-	dc.l	$0c813fff,$80006eff,$00000300,$222eff5c
-	dc.l	$0c810000,$00006e14,$f2009000,$123c0003
-	dc.l	$f22e4800,$ff8460ff,$00003f36,$f23c4400
-	dc.l	$3f800000,$f2009000,$f23c4422,$80800000
-	dc.l	$60ff0000,$3f2c60ff,$00003f64,$f23c4400
-	dc.l	$3f800000,$60ff0000,$3f182d7c,$00000004
-	dc.l	$ff5cf210,$4800f22e,$6800ff84,$22103228
-	dc.l	$00040281,$7fffffff,$0c813fd7,$80006c04
-	dc.l	$60000240,$0c814004,$bc7e6d04,$6000027a
-	dc.l	$f2000080,$f23a54a3,$cf9843fb,$01700000
-	dc.l	$0678f22e,$6080ff58,$222eff58,$e981d3c1
-	dc.l	$f2194828,$f2114428,$222eff58,$e2990c81
-	dc.l	$00000000,$6c000106,$f227e004,$f22e6800
-	dc.l	$ff84f200,$0023f23a,$5480fce8,$f23a5500
-	dc.l	$fd32f200,$00a3f200,$01232f02,$2401e29a
-	dc.l	$02828000,$0000b382,$02828000,$0000f23a
-	dc.l	$54a2fcc8,$f23a5522,$fd12f200,$00a3b5ae
-	dc.l	$ff84241f,$f2000123,$e2990281,$80000000
-	dc.l	$2d7c3f80,$0000ff54,$b3aeff54,$f23a54a2
-	dc.l	$fca2f23a,$5522fcec,$f20000a3,$f2000123
-	dc.l	$f22e6800,$ff90f23a,$54a2fc90,$b3aeff90
-	dc.l	$f23a5522,$fcd6f200,$00a3f200,$0123f23a
-	dc.l	$54a2fc80,$f23a5522,$fccaf200,$00a3f200
-	dc.l	$0123f23a,$48a2fc7c,$f23a4922,$fcc6f200
-	dc.l	$00a3f200,$0123f23a,$48a2fc78,$f23a4922
-	dc.l	$fcc2f200,$00a3f200,$0823f22e,$48a3ff84
-	dc.l	$f23a4422,$fcbaf22e,$4823ff90,$f21fd020
-	dc.l	$f2009000,$f22e48a2,$ff8461ff,$00003e22
-	dc.l	$f22e4422,$ff5460ff,$00003d9e,$f227e004
-	dc.l	$f22e6800,$ff84f200,$0023f23a,$5480fc34
-	dc.l	$f23a5500,$fbdef200,$00a3f22e,$6800ff90
-	dc.l	$f2000123,$e2990281,$80000000,$f23a54a2
-	dc.l	$fc1af23a,$5522fbc4,$b3aeff84,$b3aeff90
-	dc.l	$f20000a3,$00813f80,$00002d41,$ff54f200
-	dc.l	$0123f23a,$54a2fbfc,$f23a5522,$fba6f200
-	dc.l	$00a3f200,$0123f23a,$54a2fbf0,$f23a5522
-	dc.l	$fb9af200,$00a3f200,$0123f23a,$54a2fbe4
-	dc.l	$f23a5522,$fb8ef200,$00a3f200,$0123f23a
-	dc.l	$48a2fbe0,$f23a4922,$fb8af200,$00a3f200
-	dc.l	$0123f23a,$48a2fbdc,$f23a4922,$fb86f200
-	dc.l	$00a3f200,$0823f23a,$44a2fbd4,$f22e4823
-	dc.l	$ff84f22e,$48a3ff90,$f21fd020,$f2009000
-	dc.l	$f22e44a2,$ff5461ff,$00003d36,$f22e4822
-	dc.l	$ff8460ff,$00003cb2,$0c813fff,$80006e00
-	dc.l	$0048f23c,$44803f80,$0000f200,$9000f23c
-	dc.l	$44a80080,$000061ff,$00003d06,$f200b000
-	dc.l	$123c0003,$f22e4800,$ff8460ff,$00003c72
-	dc.l	$2f00f23c,$44803f80,$000061ff,$00003ce2
-	dc.l	$201f60ff,$00003ca8,$f227e03c,$2f02f23c
-	dc.l	$44800000,$00000c81,$7ffeffff,$66523d7c
-	dc.l	$7ffeff84,$2d7cc90f,$daa2ff88,$42aeff8c
-	dc.l	$3d7c7fdc,$ff902d7c,$85a308d3,$ff9442ae
-	dc.l	$ff98f200,$003af294,$000e002e,$0080ff84
-	dc.l	$002e0080,$ff90f22e,$4822ff84,$f2000080
-	dc.l	$f22e4822,$ff90f200,$00a8f22e,$48a2ff90
-	dc.l	$f22e6800,$ff84322e,$ff842241,$02810000
-	dc.l	$7fff0481,$00003fff,$0c810000,$001c6f0e
-	dc.l	$04810000,$001b1d7c,$0000ff58,$60084281
-	dc.l	$1d7c0001,$ff58243c,$00003ffe,$94812d7c
-	dc.l	$a2f9836e,$ff882d7c,$4e44152a,$ff8c3d42
-	dc.l	$ff84f200,$0100f22e,$4923ff84,$24094842
-	dc.l	$02828000,$00000082,$5f000000,$2d42ff54
-	dc.l	$f22e4522,$ff54f22e,$4528ff54,$24010682
-	dc.l	$00003fff,$3d42ff84,$2d7cc90f,$daa2ff88
-	dc.l	$42aeff8c,$06810000,$3fdd3d41,$ff902d7c
-	dc.l	$85a308d3,$ff9442ae,$ff98122e,$ff58f200
-	dc.l	$0a00f22e,$4a23ff84,$f2000a80,$f22e4aa3
-	dc.l	$ff90f200,$1180f200,$15a2f200,$0e28f200
-	dc.l	$0c28f200,$1622f200,$0180f200,$10a8f200
-	dc.l	$04220c01,$00006e00,$000ef200,$01a8f200
-	dc.l	$0ca26000,$ff0cf22e,$6100ff58,$241ff21f
-	dc.l	$d03c222e,$ff5c0c81,$00000004,$6d00fa4c
-	dc.l	$6000fc36,$3ea0b759,$f50f8688,$bef2baa5
-	dc.l	$a8924f04,$bf346f59,$b39ba65f,$00000000
-	dc.l	$00000000,$3ff60000,$e073d3fc,$199c4a00
-	dc.l	$00000000,$3ff90000,$d23cd684,$15d95fa1
-	dc.l	$00000000,$bffc0000,$8895a6c5,$fb423bca
-	dc.l	$00000000,$bffd0000,$eef57e0d,$a84bc8ce
-	dc.l	$00000000,$3ffc0000,$a2f9836e,$4e44152a
-	dc.l	$00000000,$40010000,$c90fdaa2,$00000000
-	dc.l	$00000000,$3fdf0000,$85a308d4,$00000000
-	dc.l	$00000000,$c0040000,$c90fdaa2,$2168c235
-	dc.l	$21800000,$c0040000,$c2c75bcd,$105d7c23
-	dc.l	$a0d00000,$c0040000,$bc7edcf7,$ff523611
-	dc.l	$a1e80000,$c0040000,$b6365e22,$ee46f000
-	dc.l	$21480000,$c0040000,$afeddf4d,$dd3ba9ee
-	dc.l	$a1200000,$c0040000,$a9a56078,$cc3063dd
-	dc.l	$21fc0000,$c0040000,$a35ce1a3,$bb251dcb
-	dc.l	$21100000,$c0040000,$9d1462ce,$aa19d7b9
-	dc.l	$a1580000,$c0040000,$96cbe3f9,$990e91a8
-	dc.l	$21e00000,$c0040000,$90836524,$88034b96
-	dc.l	$20b00000,$c0040000,$8a3ae64f,$76f80584
-	dc.l	$a1880000,$c0040000,$83f2677a,$65ecbf73
-	dc.l	$21c40000,$c0030000,$fb53d14a,$a9c2f2c2
-	dc.l	$20000000,$c0030000,$eec2d3a0,$87ac669f
-	dc.l	$21380000,$c0030000,$e231d5f6,$6595da7b
-	dc.l	$a1300000,$c0030000,$d5a0d84c,$437f4e58
-	dc.l	$9fc00000,$c0030000,$c90fdaa2,$2168c235
-	dc.l	$21000000,$c0030000,$bc7edcf7,$ff523611
-	dc.l	$a1680000,$c0030000,$afeddf4d,$dd3ba9ee
-	dc.l	$a0a00000,$c0030000,$a35ce1a3,$bb251dcb
-	dc.l	$20900000,$c0030000,$96cbe3f9,$990e91a8
-	dc.l	$21600000,$c0030000,$8a3ae64f,$76f80584
-	dc.l	$a1080000,$c0020000,$fb53d14a,$a9c2f2c2
-	dc.l	$1f800000,$c0020000,$e231d5f6,$6595da7b
-	dc.l	$a0b00000,$c0020000,$c90fdaa2,$2168c235
-	dc.l	$20800000,$c0020000,$afeddf4d,$dd3ba9ee
-	dc.l	$a0200000,$c0020000,$96cbe3f9,$990e91a8
-	dc.l	$20e00000,$c0010000,$fb53d14a,$a9c2f2c2
-	dc.l	$1f000000,$c0010000,$c90fdaa2,$2168c235
-	dc.l	$20000000,$c0010000,$96cbe3f9,$990e91a8
-	dc.l	$20600000,$c0000000,$c90fdaa2,$2168c235
-	dc.l	$1f800000,$bfff0000,$c90fdaa2,$2168c235
-	dc.l	$1f000000,$00000000,$00000000,$00000000
-	dc.l	$00000000,$3fff0000,$c90fdaa2,$2168c235
-	dc.l	$9f000000,$40000000,$c90fdaa2,$2168c235
-	dc.l	$9f800000,$40010000,$96cbe3f9,$990e91a8
-	dc.l	$a0600000,$40010000,$c90fdaa2,$2168c235
-	dc.l	$a0000000,$40010000,$fb53d14a,$a9c2f2c2
-	dc.l	$9f000000,$40020000,$96cbe3f9,$990e91a8
-	dc.l	$a0e00000,$40020000,$afeddf4d,$dd3ba9ee
-	dc.l	$20200000,$40020000,$c90fdaa2,$2168c235
-	dc.l	$a0800000,$40020000,$e231d5f6,$6595da7b
-	dc.l	$20b00000,$40020000,$fb53d14a,$a9c2f2c2
-	dc.l	$9f800000,$40030000,$8a3ae64f,$76f80584
-	dc.l	$21080000,$40030000,$96cbe3f9,$990e91a8
-	dc.l	$a1600000,$40030000,$a35ce1a3,$bb251dcb
-	dc.l	$a0900000,$40030000,$afeddf4d,$dd3ba9ee
-	dc.l	$20a00000,$40030000,$bc7edcf7,$ff523611
-	dc.l	$21680000,$40030000,$c90fdaa2,$2168c235
-	dc.l	$a1000000,$40030000,$d5a0d84c,$437f4e58
-	dc.l	$1fc00000,$40030000,$e231d5f6,$6595da7b
-	dc.l	$21300000,$40030000,$eec2d3a0,$87ac669f
-	dc.l	$a1380000,$40030000,$fb53d14a,$a9c2f2c2
-	dc.l	$a0000000,$40040000,$83f2677a,$65ecbf73
-	dc.l	$a1c40000,$40040000,$8a3ae64f,$76f80584
-	dc.l	$21880000,$40040000,$90836524,$88034b96
-	dc.l	$a0b00000,$40040000,$96cbe3f9,$990e91a8
-	dc.l	$a1e00000,$40040000,$9d1462ce,$aa19d7b9
-	dc.l	$21580000,$40040000,$a35ce1a3,$bb251dcb
-	dc.l	$a1100000,$40040000,$a9a56078,$cc3063dd
-	dc.l	$a1fc0000,$40040000,$afeddf4d,$dd3ba9ee
-	dc.l	$21200000,$40040000,$b6365e22,$ee46f000
-	dc.l	$a1480000,$40040000,$bc7edcf7,$ff523611
-	dc.l	$21e80000,$40040000,$c2c75bcd,$105d7c23
-	dc.l	$20d00000,$40040000,$c90fdaa2,$2168c235
-	dc.l	$a1800000,$f2104800,$22103228,$00040281
-	dc.l	$7fffffff,$0c813fd7,$80006c04,$60000134
-	dc.l	$0c814004,$bc7e6d04,$60000144,$f2000080
-	dc.l	$f23a54a3,$c6dc43fa,$fdbcf201,$6080e981
-	dc.l	$d3c1f219,$4828f211,$4428ea99,$02818000
-	dc.l	$0000f227,$e00c0c81,$00000000,$6d000072
-	dc.l	$f2000080,$f20004a3,$f23a5580,$faf8f23a
-	dc.l	$5500fafa,$f20005a3,$f2000523,$f23a55a2
-	dc.l	$faf4f23a,$4922fafe,$f20005a3,$f2000523
-	dc.l	$f23a49a2,$fb00f23a,$4922fb0a,$f20005a3
-	dc.l	$f2000523,$f23a49a2,$fb0cf200,$0123f200
-	dc.l	$0ca3f200,$0822f23c,$44a23f80,$0000f21f
-	dc.l	$d030f200,$9000f200,$042060ff,$0000357a
-	dc.l	$f2000080,$f2000023,$f23a5580,$fa88f23a
-	dc.l	$5500fa8a,$f20001a3,$f2000123,$f23a55a2
-	dc.l	$fa84f23a,$4922fa8e,$f20001a3,$f2000123
-	dc.l	$f23a49a2,$fa90f23a,$4922fa9a,$f20001a3
-	dc.l	$f2000123,$f23a49a2,$fa9cf200,$0523f200
-	dc.l	$0c23f200,$08a2f23c,$44223f80,$0000f21f
-	dc.l	$d030f227,$68800a97,$80000000,$f2009000
-	dc.l	$f21f4820,$60ff0000,$35000c81,$3fff8000
-	dc.l	$6e1cf227,$6800f200,$9000123c,$0003f21f
-	dc.l	$480060ff,$000034da,$60ff0000,$3522f227
-	dc.l	$e03c2f02,$f23c4480,$00000000,$0c817ffe
-	dc.l	$ffff6652,$3d7c7ffe,$ff842d7c,$c90fdaa2
-	dc.l	$ff8842ae,$ff8c3d7c,$7fdcff90,$2d7c85a3
-	dc.l	$08d3ff94,$42aeff98,$f200003a,$f294000e
-	dc.l	$002e0080,$ff84002e,$0080ff90,$f22e4822
-	dc.l	$ff84f200,$0080f22e,$4822ff90,$f20000a8
-	dc.l	$f22e48a2,$ff90f22e,$6800ff84,$322eff84
-	dc.l	$22410281,$00007fff,$04810000,$3fff0c81
-	dc.l	$0000001c,$6f0e0481,$0000001b,$1d7c0000
-	dc.l	$ff586008,$42811d7c,$0001ff58,$243c0000
-	dc.l	$3ffe9481,$2d7ca2f9,$836eff88,$2d7c4e44
-	dc.l	$152aff8c,$3d42ff84,$f2000100,$f22e4923
-	dc.l	$ff842409,$48420282,$80000000,$00825f00
-	dc.l	$00002d42,$ff54f22e,$4522ff54,$f22e4528
-	dc.l	$ff542401,$06820000,$3fff3d42,$ff842d7c
-	dc.l	$c90fdaa2,$ff8842ae,$ff8c0681,$00003fdd
-	dc.l	$3d41ff90,$2d7c85a3,$08d3ff94,$42aeff98
-	dc.l	$122eff58,$f2000a00,$f22e4a23,$ff84f200
-	dc.l	$0a80f22e,$4aa3ff90,$f2001180,$f20015a2
-	dc.l	$f2000e28,$f2000c28,$f2001622,$f2000180
-	dc.l	$f20010a8,$f2000422,$0c010000,$6e00000e
-	dc.l	$f20001a8,$f2000ca2,$6000ff0c,$f22e6100
-	dc.l	$ff54241f,$f21fd03c,$222eff54,$e2996000
-	dc.l	$fd72bff6,$687e3149,$87d84002,$ac6934a2
-	dc.l	$6db3bfc2,$476f4e1d,$a28e3fb3,$44447f87
-	dc.l	$6989bfb7,$44ee7faf,$45db3fbc,$71c64694
-	dc.l	$0220bfc2,$49249218,$72f93fc9,$99999999
-	dc.l	$8fa9bfd5,$55555555,$5555bfb7,$0bf39853
-	dc.l	$9e6a3fbc,$7187962d,$1d7dbfc2,$49248271
-	dc.l	$07b83fc9,$99999996,$263ebfd5,$55555555
-	dc.l	$55363fff,$0000c90f,$daa22168,$c2350000
-	dc.l	$0000bfff,$0000c90f,$daa22168,$c2350000
-	dc.l	$00000001,$00008000,$00000000,$00000000
-	dc.l	$00008001,$00008000,$00000000,$00000000
-	dc.l	$00003ffb,$000083d1,$52c5060b,$7a510000
-	dc.l	$00003ffb,$00008bc8,$54456549,$8b8b0000
-	dc.l	$00003ffb,$000093be,$40601762,$6b0d0000
-	dc.l	$00003ffb,$00009bb3,$078d35ae,$c2020000
-	dc.l	$00003ffb,$0000a3a6,$9a525ddc,$e7de0000
-	dc.l	$00003ffb,$0000ab98,$e9436276,$56190000
-	dc.l	$00003ffb,$0000b389,$e502f9c5,$98620000
-	dc.l	$00003ffb,$0000bb79,$7e436b09,$e6fb0000
-	dc.l	$00003ffb,$0000c367,$a5c739e5,$f4460000
-	dc.l	$00003ffb,$0000cb54,$4c61cff7,$d5c60000
-	dc.l	$00003ffb,$0000d33f,$62f82488,$533e0000
-	dc.l	$00003ffb,$0000db28,$da816240,$4c770000
-	dc.l	$00003ffb,$0000e310,$a4078ad3,$4f180000
-	dc.l	$00003ffb,$0000eaf6,$b0a8188e,$e1eb0000
-	dc.l	$00003ffb,$0000f2da,$f1949dbe,$79d50000
-	dc.l	$00003ffb,$0000fabd,$581361d4,$7e3e0000
-	dc.l	$00003ffc,$00008346,$ac210959,$ecc40000
-	dc.l	$00003ffc,$00008b23,$2a083042,$82d80000
-	dc.l	$00003ffc,$000092fb,$70b8d29a,$e2f90000
-	dc.l	$00003ffc,$00009acf,$476f5ccd,$1cb40000
-	dc.l	$00003ffc,$0000a29e,$76304954,$f23f0000
-	dc.l	$00003ffc,$0000aa68,$c5d08ab8,$52300000
-	dc.l	$00003ffc,$0000b22d,$fffd9d53,$9f830000
-	dc.l	$00003ffc,$0000b9ed,$ef453e90,$0ea50000
-	dc.l	$00003ffc,$0000c1a8,$5f1cc75e,$3ea50000
-	dc.l	$00003ffc,$0000c95d,$1be82813,$8de60000
-	dc.l	$00003ffc,$0000d10b,$f300840d,$2de40000
-	dc.l	$00003ffc,$0000d8b4,$b2ba6bc0,$5e7a0000
-	dc.l	$00003ffc,$0000e057,$2a6bb423,$35f60000
-	dc.l	$00003ffc,$0000e7f3,$2a70ea9c,$aa8f0000
-	dc.l	$00003ffc,$0000ef88,$843264ec,$efaa0000
-	dc.l	$00003ffc,$0000f717,$0a28ecc0,$66660000
-	dc.l	$00003ffd,$0000812f,$d288332d,$ad320000
-	dc.l	$00003ffd,$000088a8,$d1b1218e,$4d640000
-	dc.l	$00003ffd,$00009012,$ab3f23e4,$aee80000
-	dc.l	$00003ffd,$0000976c,$c3d411e7,$f1b90000
-	dc.l	$00003ffd,$00009eb6,$89493889,$a2270000
-	dc.l	$00003ffd,$0000a5ef,$72c34487,$361b0000
-	dc.l	$00003ffd,$0000ad17,$00baf07a,$72270000
-	dc.l	$00003ffd,$0000b42c,$bcfafd37,$efb70000
-	dc.l	$00003ffd,$0000bb30,$3a940ba8,$0f890000
-	dc.l	$00003ffd,$0000c221,$15c6fcae,$bbaf0000
-	dc.l	$00003ffd,$0000c8fe,$f3e68633,$12210000
-	dc.l	$00003ffd,$0000cfc9,$8330b400,$0c700000
-	dc.l	$00003ffd,$0000d680,$7aa1102c,$5bf90000
-	dc.l	$00003ffd,$0000dd23,$99bc3125,$2aa30000
-	dc.l	$00003ffd,$0000e3b2,$a8556b8f,$c5170000
-	dc.l	$00003ffd,$0000ea2d,$764f6431,$59890000
-	dc.l	$00003ffd,$0000f3bf,$5bf8bad1,$a21d0000
-	dc.l	$00003ffe,$0000801c,$e39e0d20,$5c9a0000
-	dc.l	$00003ffe,$00008630,$a2dada1e,$d0660000
-	dc.l	$00003ffe,$00008c1a,$d445f3e0,$9b8c0000
-	dc.l	$00003ffe,$000091db,$8f1664f3,$50e20000
-	dc.l	$00003ffe,$00009773,$1420365e,$538c0000
-	dc.l	$00003ffe,$00009ce1,$c8e6a0b8,$cdba0000
-	dc.l	$00003ffe,$0000a228,$32dbcada,$ae090000
-	dc.l	$00003ffe,$0000a746,$f2ddb760,$22940000
-	dc.l	$00003ffe,$0000ac3e,$c0fb997d,$d6a20000
-	dc.l	$00003ffe,$0000b110,$688aebdc,$6f6a0000
-	dc.l	$00003ffe,$0000b5bc,$c49059ec,$c4b00000
-	dc.l	$00003ffe,$0000ba44,$bc7dd470,$782f0000
-	dc.l	$00003ffe,$0000bea9,$4144fd04,$9aac0000
-	dc.l	$00003ffe,$0000c2eb,$4abb6616,$28b60000
-	dc.l	$00003ffe,$0000c70b,$d54ce602,$ee140000
-	dc.l	$00003ffe,$0000cd00,$0549adec,$71590000
-	dc.l	$00003ffe,$0000d484,$57d2d8ea,$4ea30000
-	dc.l	$00003ffe,$0000db94,$8da712de,$ce3b0000
-	dc.l	$00003ffe,$0000e238,$55f969e8,$096a0000
-	dc.l	$00003ffe,$0000e877,$1129c435,$32590000
-	dc.l	$00003ffe,$0000ee57,$c16e0d37,$9c0d0000
-	dc.l	$00003ffe,$0000f3e1,$0211a87c,$37790000
-	dc.l	$00003ffe,$0000f919,$039d758b,$8d410000
-	dc.l	$00003ffe,$0000fe05,$8b8f6493,$5fb30000
-	dc.l	$00003fff,$00008155,$fb497b68,$5d040000
-	dc.l	$00003fff,$00008388,$9e3549d1,$08e10000
-	dc.l	$00003fff,$0000859c,$fa76511d,$724b0000
-	dc.l	$00003fff,$00008795,$2ecfff81,$31e70000
-	dc.l	$00003fff,$00008973,$2fd19557,$641b0000
-	dc.l	$00003fff,$00008b38,$cad10193,$2a350000
-	dc.l	$00003fff,$00008ce7,$a8d8301e,$e6b50000
-	dc.l	$00003fff,$00008f46,$a39e2eae,$52810000
-	dc.l	$00003fff,$0000922d,$a7d79188,$84870000
-	dc.l	$00003fff,$000094d1,$9fcbdedf,$52410000
-	dc.l	$00003fff,$0000973a,$b94419d2,$a08b0000
-	dc.l	$00003fff,$0000996f,$f00e08e1,$0b960000
-	dc.l	$00003fff,$00009b77,$3f951232,$1da70000
-	dc.l	$00003fff,$00009d55,$cc320f93,$56240000
-	dc.l	$00003fff,$00009f10,$0575006c,$c5710000
-	dc.l	$00003fff,$0000a0a9,$c290d97c,$c06c0000
-	dc.l	$00003fff,$0000a226,$59ebebc0,$630a0000
-	dc.l	$00003fff,$0000a388,$b4aff6ef,$0ec90000
-	dc.l	$00003fff,$0000a4d3,$5f1061d2,$92c40000
-	dc.l	$00003fff,$0000a608,$95dcfbe3,$187e0000
-	dc.l	$00003fff,$0000a72a,$51dc7367,$beac0000
-	dc.l	$00003fff,$0000a83a,$51530956,$168f0000
-	dc.l	$00003fff,$0000a93a,$20077539,$546e0000
-	dc.l	$00003fff,$0000aa9e,$7245023b,$26050000
-	dc.l	$00003fff,$0000ac4c,$84ba6fe4,$d58f0000
-	dc.l	$00003fff,$0000adce,$4a4a606b,$97120000
-	dc.l	$00003fff,$0000af2a,$2dcd8d26,$3c9c0000
-	dc.l	$00003fff,$0000b065,$6f81f222,$65c70000
-	dc.l	$00003fff,$0000b184,$65150f71,$496a0000
-	dc.l	$00003fff,$0000b28a,$aa156f9a,$da350000
-	dc.l	$00003fff,$0000b37b,$44ff3766,$b8950000
-	dc.l	$00003fff,$0000b458,$c3dce963,$04330000
-	dc.l	$00003fff,$0000b525,$529d5622,$46bd0000
-	dc.l	$00003fff,$0000b5e2,$cca95f9d,$88cc0000
-	dc.l	$00003fff,$0000b692,$cada7aca,$1ada0000
-	dc.l	$00003fff,$0000b736,$aea7a692,$58380000
-	dc.l	$00003fff,$0000b7cf,$ab287e9f,$7b360000
-	dc.l	$00003fff,$0000b85e,$cc66cb21,$98350000
-	dc.l	$00003fff,$0000b8e4,$fd5a20a5,$93da0000
-	dc.l	$00003fff,$0000b99f,$41f64aff,$9bb50000
-	dc.l	$00003fff,$0000ba7f,$1e17842b,$be7b0000
-	dc.l	$00003fff,$0000bb47,$12857637,$e17d0000
-	dc.l	$00003fff,$0000bbfa,$be8a4788,$df6f0000
-	dc.l	$00003fff,$0000bc9d,$0fad2b68,$9d790000
-	dc.l	$00003fff,$0000bd30,$6a39471e,$cd860000
-	dc.l	$00003fff,$0000bdb6,$c731856a,$f18a0000
-	dc.l	$00003fff,$0000be31,$cac502e8,$0d700000
-	dc.l	$00003fff,$0000bea2,$d55ce331,$94e20000
-	dc.l	$00003fff,$0000bf0b,$10b7c031,$28f00000
-	dc.l	$00003fff,$0000bf6b,$7a18dacb,$778d0000
-	dc.l	$00003fff,$0000bfc4,$ea4663fa,$18f60000
-	dc.l	$00003fff,$0000c018,$1bde8b89,$a4540000
-	dc.l	$00003fff,$0000c065,$b066cfbf,$64390000
-	dc.l	$00003fff,$0000c0ae,$345f5634,$0ae60000
-	dc.l	$00003fff,$0000c0f2,$22919cb9,$e6a70000
-	dc.l	$0000f210,$48002210,$32280004,$f22e6800
-	dc.l	$ff840281,$7fffffff,$0c813ffb,$80006c04
-	dc.l	$600000d0,$0c814002,$ffff6f04,$6000014c
-	dc.l	$02aef800,$0000ff88,$00ae0400,$0000ff88
-	dc.l	$2d7c0000,$0000ff8c,$f2000080,$f22e48a3
-	dc.l	$ff84f22e,$4828ff84,$f23c44a2,$3f800000
-	dc.l	$f2000420,$2f022401,$02810000,$78000282
-	dc.l	$7fff0000,$04823ffb,$0000e282,$d282ee81
-	dc.l	$43faf780,$d3c12d59,$ff902d59,$ff942d59
-	dc.l	$ff98222e,$ff840281,$80000000,$83aeff90
-	dc.l	$241ff227,$e004f200,$0080f200,$04a3f23a
-	dc.l	$5500f6a0,$f2000522,$f2000523,$f20000a3
-	dc.l	$f23a5522,$f696f23a,$54a3f698,$f20008a3
-	dc.l	$f2000422,$f21fd020,$f2009000,$f22e4822
-	dc.l	$ff9060ff,$000029d2,$0c813fff,$80006e00
-	dc.l	$008a0c81,$3fd78000,$6d00006c,$f227e00c
-	dc.l	$f2000023,$f2000080,$f20004a3,$f23a5500
-	dc.l	$f65af23a,$5580f65c,$f2000523,$f20005a3
-	dc.l	$f23a5522,$f656f23a,$55a2f658,$f2000523
-	dc.l	$f2000ca3,$f23a5522,$f652f23a,$54a2f654
-	dc.l	$f2000123,$f22e4823,$ff84f200,$08a2f200
-	dc.l	$0423f21f,$d030f200,$9000f22e,$4822ff84
-	dc.l	$60ff0000,$2954f200,$9000123c,$0003f22e
-	dc.l	$4800ff84,$60ff0000,$29380c81,$40638000
-	dc.l	$6e00008e,$f227e00c,$f23c4480,$bf800000
-	dc.l	$f20000a0,$f2000400,$f2000023,$f22e6880
-	dc.l	$ff84f200,$0080f200,$04a3f23a,$5580f5ec
-	dc.l	$f23a5500,$f5eef200,$05a3f200,$0523f23a
-	dc.l	$55a2f5e8,$f23a5522,$f5eaf200,$0ca3f200
-	dc.l	$0123f23a,$54a2f5e4,$f22e4823,$ff84f200
-	dc.l	$08a2f200,$0423f22e,$4822ff84,$f21fd030
-	dc.l	$f2009000,$4a106a0c,$f23a4822,$f5d660ff
-	dc.l	$000028c6,$f23a4822,$f5ba60ff,$000028b2
-	dc.l	$4a106a16,$f23a4800,$f5baf200,$9000f23a
-	dc.l	$4822f5c0,$60ff0000,$28a0f23a,$4800f594
-	dc.l	$f2009000,$f23a4822,$f5ba60ff,$00002882
-	dc.l	$60ff0000,$28baf210,$48002210,$32280004
-	dc.l	$02817fff,$ffff0c81,$3fff8000,$6c4e0c81
-	dc.l	$3fd78000,$6d00007c,$f23c4480,$3f800000
-	dc.l	$f20000a8,$f227e004,$f23c4500,$3f800000
-	dc.l	$f2000122,$f20008a3,$f21fd020,$f2000484
-	dc.l	$f2000420,$f227e001,$41d761ff,$fffffd66
-	dc.l	$dffc0000,$000c60ff,$0000280e,$f2000018
-	dc.l	$f23c4438,$3f800000,$f2d20000,$265af23a
-	dc.l	$4800b8ae,$22100281,$80000000,$00813f80
-	dc.l	$00002f01,$f2009000,$f21f4423,$60ff0000
-	dc.l	$27d8f200,$9000123c,$0003f210,$480060ff
-	dc.l	$000027be,$60ff0000,$2806f210,$48002210
-	dc.l	$32280004,$02817fff,$ffff0c81,$3fff8000
-	dc.l	$6c44f23c,$44803f80,$0000f200,$00a2f200
-	dc.l	$001af23c,$44223f80,$0000f200,$0420f200
-	dc.l	$00042f00,$4280f227,$e00141d7,$61ffffff
-	dc.l	$fcc4dffc,$0000000c,$f21f9000,$f2000022
-	dc.l	$60ff0000,$276cf200,$0018f23c,$44383f80
-	dc.l	$0000f2d2,$000025b0,$4a106a18,$f23a4800
-	dc.l	$b7f0f200,$9000f23c,$44220080,$000060ff
-	dc.l	$0000273e,$60ff0000,$2988f200,$9000f23a
-	dc.l	$4800b7de,$60ff0000,$27283fdc,$000082e3
-	dc.l	$08654361,$c4c60000,$00003fa5,$55555555
-	dc.l	$4cc13fc5,$55555555,$4a543f81,$11111117
-	dc.l	$43853fa5,$55555555,$4f5a3fc5,$55555555
-	dc.l	$55550000,$00000000,$00003ec7,$1de3a577
-	dc.l	$46823efa,$01a019d7,$cb683f2a,$01a01a01
-	dc.l	$9df33f56,$c16c16c1,$70e23f81,$11111111
-	dc.l	$11113fa5,$55555555,$55553ffc,$0000aaaa
-	dc.l	$aaaaaaaa,$aaab0000,$000048b0,$00000000
-	dc.l	$00003730,$00000000,$00003fff,$00008000
-	dc.l	$00000000,$00000000,$00003fff,$00008164
-	dc.l	$d1f3bc03,$07749f84,$1a9b3fff,$000082cd
-	dc.l	$8698ac2b,$a1d89fc1,$d5b93fff,$0000843a
-	dc.l	$28c3acde,$4048a072,$83693fff,$000085aa
-	dc.l	$c367cc48,$7b141fc5,$c95c3fff,$0000871f
-	dc.l	$61969e8d,$10101ee8,$5c9f3fff,$00008898
-	dc.l	$0e8092da,$85289fa2,$07293fff,$00008a14
-	dc.l	$d575496e,$fd9ca07b,$f9af3fff,$00008b95
-	dc.l	$c1e3ea8b,$d6e8a002,$0dcf3fff,$00008d1a
-	dc.l	$df5b7e5b,$a9e4205a,$63da3fff,$00008ea4
-	dc.l	$398b45cd,$53c01eb7,$00513fff,$00009031
-	dc.l	$dc431466,$b1dc1f6e,$b0293fff,$000091c3
-	dc.l	$d373ab11,$c338a078,$14943fff,$0000935a
-	dc.l	$2b2f13e6,$e92c9eb3,$19b03fff,$000094f4
-	dc.l	$efa8fef7,$09602017,$457d3fff,$00009694
-	dc.l	$2d372018,$5a001f11,$d5373fff,$00009837
-	dc.l	$f0518db8,$a9709fb9,$52dd3fff,$000099e0
-	dc.l	$459320b7,$fa641fe4,$30873fff,$00009b8d
-	dc.l	$39b9d54e,$55381fa2,$a8183fff,$00009d3e
-	dc.l	$d9a72cff,$b7501fde,$494d3fff,$00009ef5
-	dc.l	$326091a1,$11ac2050,$48903fff,$0000a0b0
-	dc.l	$510fb971,$4fc4a073,$691c3fff,$0000a270
-	dc.l	$43030c49,$68181f9b,$7a053fff,$0000a435
-	dc.l	$15ae09e6,$80a0a079,$71263fff,$0000a5fe
-	dc.l	$d6a9b151,$38eca071,$a1403fff,$0000a7cd
-	dc.l	$93b4e965,$3568204f,$62da3fff,$0000a9a1
-	dc.l	$5ab4ea7c,$0ef81f28,$3c4a3fff,$0000ab7a
-	dc.l	$39b5a93e,$d3389f9a,$7fdc3fff,$0000ad58
-	dc.l	$3eea42a1,$4ac8a05b,$3fac3fff,$0000af3b
-	dc.l	$78ad690a,$43741fdf,$26103fff,$0000b123
-	dc.l	$f581d2ac,$25909f70,$5f903fff,$0000b311
-	dc.l	$c412a911,$2488201f,$678a3fff,$0000b504
-	dc.l	$f333f9de,$64841f32,$fb133fff,$0000b6fd
-	dc.l	$91e328d1,$77902003,$8b303fff,$0000b8fb
-	dc.l	$af4762fb,$9ee8200d,$c3cc3fff,$0000baff
-	dc.l	$5ab2133e,$45fc9f8b,$2ae63fff,$0000bd08
-	dc.l	$a39f580c,$36c0a02b,$bf703fff,$0000bf17
-	dc.l	$99b67a73,$1084a00b,$f5183fff,$0000c12c
-	dc.l	$4cca6670,$9458a041,$dd413fff,$0000c346
-	dc.l	$ccda2497,$64089fdf,$137b3fff,$0000c567
-	dc.l	$2a115506,$dadc201f,$15683fff,$0000c78d
-	dc.l	$74c8abb9,$b15c1fc1,$3a2e3fff,$0000c9b9
-	dc.l	$bd866e2f,$27a4a03f,$8f033fff,$0000cbec
-	dc.l	$14fef272,$7c5c1ff4,$907d3fff,$0000ce24
-	dc.l	$8c151f84,$80e49e6e,$53e43fff,$0000d063
-	dc.l	$33daef2b,$25941fd6,$d45c3fff,$0000d2a8
-	dc.l	$1d91f12a,$e45ca076,$edb93fff,$0000d4f3
-	dc.l	$5aabcfed,$fa209fa6,$de213fff,$0000d744
-	dc.l	$fccad69d,$6af41ee6,$9a2f3fff,$0000d99d
-	dc.l	$15c278af,$d7b4207f,$439f3fff,$0000dbfb
-	dc.l	$b797daf2,$3754201e,$c2073fff,$0000de60
-	dc.l	$f4825e0e,$91249e8b,$e1753fff,$0000e0cc
-	dc.l	$deec2a94,$e1102003,$2c4b3fff,$0000e33f
-	dc.l	$8972be8a,$5a502004,$dff53fff,$0000e5b9
-	dc.l	$06e77c83,$48a81e72,$f47a3fff,$0000e839
-	dc.l	$6a503c4b,$dc681f72,$2f223fff,$0000eac0
-	dc.l	$c6e7dd24,$3930a017,$e9453fff,$0000ed4f
-	dc.l	$301ed994,$2b841f40,$1a5b3fff,$0000efe4
-	dc.l	$b99bdcda,$f5cc9fb9,$a9e33fff,$0000f281
-	dc.l	$773c59ff,$b1382074,$4c053fff,$0000f525
-	dc.l	$7d152486,$cc2c1f77,$3a193fff,$0000f7d0
-	dc.l	$df730ad1,$3bb81ffe,$90d53fff,$0000fa83
-	dc.l	$b2db722a,$033ca041,$ed223fff,$0000fd3e
-	dc.l	$0c0cf486,$c1741f85,$3f3a2210,$02817fff
-	dc.l	$00000c81,$3fbe0000,$6c0660ff,$00000108
-	dc.l	$32280004,$0c81400c,$b1676d06,$60ff0000
-	dc.l	$010cf210,$4800f200,$0080f23c,$442342b8
-	dc.l	$aa3bf227,$e00c2d7c,$00000000,$ff58f201
-	dc.l	$600043fa,$fbb6f201,$40002d41,$ff540281
-	dc.l	$0000003f,$e989d3c1,$222eff54,$ec810641
-	dc.l	$3fff3d7a,$fb06ff54,$f2000100,$f23c4423
-	dc.l	$bc317218,$f23a4923,$faf2f200,$0422f200
-	dc.l	$0822f200,$0080f200,$04a3f23c,$45003ab6
-	dc.l	$0b70f200,$0523f200,$0580f23c,$45a33c08
-	dc.l	$8895f23a,$5522fad4,$f23a55a2,$fad6f200
-	dc.l	$05233d41,$ff842d7c,$80000000,$ff8842ae
-	dc.l	$ff8cf200,$05a3f23c,$45223f00,$0000f200
-	dc.l	$01a3f200,$0523f200,$0c22f219,$4880f200
-	dc.l	$0822f200,$0423f21f,$d030f211,$4422f200
-	dc.l	$0422222e,$ff584a81,$6706f22e,$4823ff90
-	dc.l	$f2009000,$123c0000,$f22e4823,$ff8460ff
-	dc.l	$0000216e,$f210d080,$f2009000,$f23c4422
-	dc.l	$3f800000,$60ff0000,$21680c81,$400cb27c
-	dc.l	$6e66f210,$4800f200,$0080f23c,$442342b8
-	dc.l	$aa3bf227,$e00c2d7c,$00000001,$ff58f201
-	dc.l	$600043fa,$faa6f201,$40002d41,$ff540281
-	dc.l	$0000003f,$e989d3c1,$222eff54,$ec812d41
-	dc.l	$ff54e281,$93aeff54,$06413fff,$3d41ff90
-	dc.l	$2d7c8000,$0000ff94,$42aeff98,$222eff54
-	dc.l	$06413fff,$6000fed2,$4a106bff,$00001fbc
-	dc.l	$60ff0000,$20ae2f10,$02978000,$00000097
-	dc.l	$00800000,$f23c4400,$3f800000,$f2009000
-	dc.l	$f21f4422,$60ff0000,$20c82210,$02817fff
-	dc.l	$00000c81,$3ffd0000,$6c0660ff,$0000015e
-	dc.l	$32280004,$0c814004,$c2156f06,$60ff0000
-	dc.l	$026cf210,$4800f200,$0080f23c,$442342b8
-	dc.l	$aa3bf227,$e00cf201,$600043fa,$f9eef201
-	dc.l	$40002d41,$ff540281,$0000003f,$e989d3c1
-	dc.l	$222eff54,$ec812d41,$ff54f200,$0100f23c
-	dc.l	$4423bc31,$7218f23a,$4923f930,$f2000422
-	dc.l	$f2000822,$06413fff,$f2000080,$f20004a3
-	dc.l	$f23c4500,$3950097b,$f2000523,$f2000580
-	dc.l	$f23c45a3,$3ab60b6a,$f23a5522,$f91ef23a
-	dc.l	$55a2f920,$3d41ff84,$2d7c8000,$0000ff88
-	dc.l	$42aeff8c,$f2000523,$222eff54,$4441f200
-	dc.l	$05a30641,$3ffff23a,$5522f900,$f23c45a2
-	dc.l	$3f000000,$f2000523,$00418000,$3d41ff90
-	dc.l	$2d7c8000,$0000ff94,$42aeff98,$f2000ca3
-	dc.l	$f2000123,$f2000422,$f2000822,$f21fd030
-	dc.l	$f2114823,$222eff54,$0c810000,$003f6f1a
-	dc.l	$f2294480,$000cf22e,$48a2ff90,$f2000422
-	dc.l	$f2114822,$60ff0000,$00340c81,$fffffffd
-	dc.l	$6c16f229,$4422000c,$f2114822,$f22e4822
-	dc.l	$ff9060ff,$00000016,$f2194880,$f2114422
-	dc.l	$f22e48a2,$ff90f200,$0422f200,$9000f22e
-	dc.l	$4823ff84,$60ff0000,$1f500c81,$3fbe0000
-	dc.l	$6c6c0c81,$00330000,$6d2c2d7c,$80010000
-	dc.l	$ff842d7c,$80000000,$ff8842ae,$ff8cf210
-	dc.l	$4800f200,$9000123c,$0002f22e,$4822ff84
-	dc.l	$60ff0000,$1f0cf210,$4800f23a,$5423f86c
-	dc.l	$2d7c8001,$0000ff84,$2d7c8000,$0000ff88
-	dc.l	$42aeff8c,$f22e4822,$ff84f200,$9000123c
-	dc.l	$0000f23a,$5423f84c,$60ff0000,$1ed4f210
-	dc.l	$4800f200,$0023f227,$e00cf23c,$44802f30
-	dc.l	$caa8f200,$00a3f23c,$4500310f,$8290f23c
-	dc.l	$44a232d7,$3220f200,$0123f200,$00a3f23c
-	dc.l	$45223493,$f281f23a,$54a2f7c0,$f2000123
-	dc.l	$f20000a3,$f23a5522,$f7baf23a,$54a2f7bc
-	dc.l	$f2000123,$f20000a3,$f23a5522,$f7b6f23a
-	dc.l	$54a2f7b8,$f2000123,$f20000a3,$f23a5522
-	dc.l	$f7b2f23a,$48a2f7b4,$f2000123,$f20000a3
-	dc.l	$f2000123,$f21048a3,$f23c4423,$3f000000
-	dc.l	$f20008a2,$f21fd030,$f2000422,$f2009000
-	dc.l	$f2104822,$60ff0000,$1e302210,$0c810000
-	dc.l	$00006e00,$fbacf23c,$4400bf80,$0000f200
-	dc.l	$9000f23c,$44220080,$000060ff,$00001e1a
-	dc.l	$60ff0000,$1e4a3028,$00000880,$000f0440
-	dc.l	$3ffff200,$50006d02,$4e751d7c,$0008ff64
-	dc.l	$4e7561ff,$00002342,$44400440,$3ffff200
-	dc.l	$50001d7c,$0008ff64,$4e753028,$00000040
-	dc.l	$7fff0880,$000e2d68,$0004ff88,$2d680008
-	dc.l	$ff8c3d40,$ff84f22e,$4800ff84,$6b024e75
-	dc.l	$1d7c0008,$ff644e75,$61ff0000,$22fc60ca
-	dc.l	$7ffb0000,$80000000,$00000000,$00000000
-	dc.l	$f2104800,$22103228,$00040281,$7fffffff
-	dc.l	$0c81400c,$b1676e42,$f2000018,$2f004280
-	dc.l	$f227e001,$41d761ff,$fffffad2,$dffc0000
-	dc.l	$000cf23c,$44233f00,$0000201f,$f23c4480
-	dc.l	$3e800000,$f20000a0,$f2009000,$123c0002
-	dc.l	$f2000422,$60ff0000,$1d280c81,$400cb2b3
-	dc.l	$6e3cf200,$0018f23a,$5428adb6,$f23a5428
-	dc.l	$adb82f00,$4280f227,$e00141d7,$61ffffff
-	dc.l	$fa7cdffc,$0000000c,$201ff200,$9000123c
-	dc.l	$0000f23a,$4823ff5a,$60ff0000,$1ce460ff
-	dc.l	$00001cb0,$f23c4400,$3f800000,$f2009000
-	dc.l	$f23c4422,$00800000,$60ff0000,$1cd4f210
-	dc.l	$48002210,$32280004,$22410281,$7fffffff
-	dc.l	$0c81400c,$b1676e62,$f2000018,$48e78040
-	dc.l	$f227e001,$41d74280,$61ffffff,$fbe0dffc
-	dc.l	$0000000c,$f23c9000,$00000000,$4cdf0201
-	dc.l	$f2000080,$f23c44a2,$3f800000,$f2276800
-	dc.l	$f2000420,$22090281,$80000000,$00813f00
-	dc.l	$0000f21f,$48222f01,$f2009000,$123c0000
-	dc.l	$f21f4423,$60ff0000,$1c480c81,$400cb2b3
-	dc.l	$6eff0000,$1bc2f200,$0018f23a,$5428acd2
-	dc.l	$2f3c0000,$00002f3c,$80000000,$22090281
-	dc.l	$80000000,$00817ffb,$00002f01,$f23a5428
-	dc.l	$acb82f00,$4280f227,$e00141d7,$61ffffff
-	dc.l	$f97cdffc,$0000000c,$201ff200,$9000123c
-	dc.l	$0000f21f,$482360ff,$00001be6,$60ff0000
-	dc.l	$1c2ef210,$4800f22e,$6800ff84,$22103228
-	dc.l	$00042d41,$ff840281,$7fffffff,$0c813fd7
-	dc.l	$80006d00,$00740c81,$3fffddce,$6e00006a
-	dc.l	$222eff84,$2d41ff5c,$02817fff,$00000681
-	dc.l	$00010000,$2d41ff84,$02ae8000,$0000ff5c
-	dc.l	$f22e4800,$ff842f00,$4280f227,$e00141d7
-	dc.l	$61ffffff,$fac8dffc,$0000000c,$201ff200
-	dc.l	$0080f23c,$44a24000,$0000222e,$ff5cf22e
-	dc.l	$6880ff84,$b3aeff84,$f2009000,$f22e4820
-	dc.l	$ff8460ff,$00001b52,$0c813fff,$80006d00
-	dc.l	$00880c81,$40048aa1,$6e000092,$222eff84
-	dc.l	$2d41ff5c,$02817fff,$00000681,$00010000
-	dc.l	$2d41ff84,$02ae8000,$0000ff5c,$222eff5c
-	dc.l	$f22e4800,$ff842f00,$4280f227,$e00141d7
-	dc.l	$61ffffff,$f878dffc,$0000000c,$201f222e
-	dc.l	$ff5cf23c,$44223f80,$00000a81,$c0000000
-	dc.l	$f2014480,$f20000a0,$222eff5c,$00813f80
-	dc.l	$0000f201,$4400f200,$9000123c,$0002f200
-	dc.l	$042260ff,$00001ac2,$f2009000,$123c0003
-	dc.l	$f22e4800,$ff8460ff,$00001aa6,$222eff84
-	dc.l	$02818000,$00000081,$3f800000,$f2014400
-	dc.l	$02818000,$00000a81,$80800000,$f2009000
-	dc.l	$f2014422,$60ff0000,$1a8060ff,$00001ac0
-	dc.l	$3ffe0000,$b17217f7,$d1cf79ac,$00000000
-	dc.l	$3f800000,$00000000,$7f800000,$bf800000
-	dc.l	$3fc2499a,$b5e4040b,$bfc555b5,$848cb7db
-	dc.l	$3fc99999,$987d8730,$bfcfffff,$ff6f7e97
-	dc.l	$3fd55555,$555555a4,$bfe00000,$00000008
-	dc.l	$3f175496,$add7dad6,$3f3c71c2,$fe80c7e0
-	dc.l	$3f624924,$928bccff,$3f899999,$999995ec
-	dc.l	$3fb55555,$55555555,$40000000,$00000000
-	dc.l	$3f990000,$80000000,$00000000,$00000000
-	dc.l	$3ffe0000,$fe03f80f,$e03f80fe,$00000000
-	dc.l	$3ff70000,$ff015358,$833c47e2,$00000000
-	dc.l	$3ffe0000,$fa232cf2,$52138ac0,$00000000
-	dc.l	$3ff90000,$bdc8d83e,$ad88d549,$00000000
-	dc.l	$3ffe0000,$f6603d98,$0f6603da,$00000000
-	dc.l	$3ffa0000,$9cf43dcf,$f5eafd48,$00000000
-	dc.l	$3ffe0000,$f2b9d648,$0f2b9d65,$00000000
-	dc.l	$3ffa0000,$da16eb88,$cb8df614,$00000000
-	dc.l	$3ffe0000,$ef2eb71f,$c4345238,$00000000
-	dc.l	$3ffb0000,$8b29b775,$1bd70743,$00000000
-	dc.l	$3ffe0000,$ebbdb2a5,$c1619c8c,$00000000
-	dc.l	$3ffb0000,$a8d839f8,$30c1fb49,$00000000
-	dc.l	$3ffe0000,$e865ac7b,$7603a197,$00000000
-	dc.l	$3ffb0000,$c61a2eb1,$8cd907ad,$00000000
-	dc.l	$3ffe0000,$e525982a,$f70c880e,$00000000
-	dc.l	$3ffb0000,$e2f2a47a,$de3a18af,$00000000
-	dc.l	$3ffe0000,$e1fc780e,$1fc780e2,$00000000
-	dc.l	$3ffb0000,$ff64898e,$df55d551,$00000000
-	dc.l	$3ffe0000,$dee95c4c,$a037ba57,$00000000
-	dc.l	$3ffc0000,$8db956a9,$7b3d0148,$00000000
-	dc.l	$3ffe0000,$dbeb61ee,$d19c5958,$00000000
-	dc.l	$3ffc0000,$9b8fe100,$f47ba1de,$00000000
-	dc.l	$3ffe0000,$d901b203,$6406c80e,$00000000
-	dc.l	$3ffc0000,$a9372f1d,$0da1bd17,$00000000
-	dc.l	$3ffe0000,$d62b80d6,$2b80d62c,$00000000
-	dc.l	$3ffc0000,$b6b07f38,$ce90e46b,$00000000
-	dc.l	$3ffe0000,$d3680d36,$80d3680d,$00000000
-	dc.l	$3ffc0000,$c3fd0329,$06488481,$00000000
-	dc.l	$3ffe0000,$d0b69fcb,$d2580d0b,$00000000
-	dc.l	$3ffc0000,$d11de0ff,$15ab18ca,$00000000
-	dc.l	$3ffe0000,$ce168a77,$25080ce1,$00000000
-	dc.l	$3ffc0000,$de1433a1,$6c66b150,$00000000
-	dc.l	$3ffe0000,$cb8727c0,$65c393e0,$00000000
-	dc.l	$3ffc0000,$eae10b5a,$7ddc8add,$00000000
-	dc.l	$3ffe0000,$c907da4e,$871146ad,$00000000
-	dc.l	$3ffc0000,$f7856e5e,$e2c9b291,$00000000
-	dc.l	$3ffe0000,$c6980c69,$80c6980c,$00000000
-	dc.l	$3ffd0000,$82012ca5,$a68206d7,$00000000
-	dc.l	$3ffe0000,$c4372f85,$5d824ca6,$00000000
-	dc.l	$3ffd0000,$882c5fcd,$7256a8c5,$00000000
-	dc.l	$3ffe0000,$c1e4bbd5,$95f6e947,$00000000
-	dc.l	$3ffd0000,$8e44c60b,$4ccfd7de,$00000000
-	dc.l	$3ffe0000,$bfa02fe8,$0bfa02ff,$00000000
-	dc.l	$3ffd0000,$944ad09e,$f4351af6,$00000000
-	dc.l	$3ffe0000,$bd691047,$07661aa3,$00000000
-	dc.l	$3ffd0000,$9a3eecd4,$c3eaa6b2,$00000000
-	dc.l	$3ffe0000,$bb3ee721,$a54d880c,$00000000
-	dc.l	$3ffd0000,$a0218434,$353f1de8,$00000000
-	dc.l	$3ffe0000,$b92143fa,$36f5e02e,$00000000
-	dc.l	$3ffd0000,$a5f2fcab,$bbc506da,$00000000
-	dc.l	$3ffe0000,$b70fbb5a,$19be3659,$00000000
-	dc.l	$3ffd0000,$abb3b8ba,$2ad362a5,$00000000
-	dc.l	$3ffe0000,$b509e68a,$9b94821f,$00000000
-	dc.l	$3ffd0000,$b1641795,$ce3ca97b,$00000000
-	dc.l	$3ffe0000,$b30f6352,$8917c80b,$00000000
-	dc.l	$3ffd0000,$b7047551,$5d0f1c61,$00000000
-	dc.l	$3ffe0000,$b11fd3b8,$0b11fd3c,$00000000
-	dc.l	$3ffd0000,$bc952afe,$ea3d13e1,$00000000
-	dc.l	$3ffe0000,$af3addc6,$80af3ade,$00000000
-	dc.l	$3ffd0000,$c2168ed0,$f458ba4a,$00000000
-	dc.l	$3ffe0000,$ad602b58,$0ad602b6,$00000000
-	dc.l	$3ffd0000,$c788f439,$b3163bf1,$00000000
-	dc.l	$3ffe0000,$ab8f69e2,$8359cd11,$00000000
-	dc.l	$3ffd0000,$ccecac08,$bf04565d,$00000000
-	dc.l	$3ffe0000,$a9c84a47,$a07f5638,$00000000
-	dc.l	$3ffd0000,$d2420487,$2dd85160,$00000000
-	dc.l	$3ffe0000,$a80a80a8,$0a80a80b,$00000000
-	dc.l	$3ffd0000,$d7894992,$3bc3588a,$00000000
-	dc.l	$3ffe0000,$a655c439,$2d7b73a8,$00000000
-	dc.l	$3ffd0000,$dcc2c4b4,$9887dacc,$00000000
-	dc.l	$3ffe0000,$a4a9cf1d,$96833751,$00000000
-	dc.l	$3ffd0000,$e1eebd3e,$6d6a6b9e,$00000000
-	dc.l	$3ffe0000,$a3065e3f,$ae7cd0e0,$00000000
-	dc.l	$3ffd0000,$e70d785c,$2f9f5bdc,$00000000
-	dc.l	$3ffe0000,$a16b312e,$a8fc377d,$00000000
-	dc.l	$3ffd0000,$ec1f392c,$5179f283,$00000000
-	dc.l	$3ffe0000,$9fd809fd,$809fd80a,$00000000
-	dc.l	$3ffd0000,$f12440d3,$e36130e6,$00000000
-	dc.l	$3ffe0000,$9e4cad23,$dd5f3a20,$00000000
-	dc.l	$3ffd0000,$f61cce92,$346600bb,$00000000
-	dc.l	$3ffe0000,$9cc8e160,$c3fb19b9,$00000000
-	dc.l	$3ffd0000,$fb091fd3,$8145630a,$00000000
-	dc.l	$3ffe0000,$9b4c6f9e,$f03a3caa,$00000000
-	dc.l	$3ffd0000,$ffe97042,$bfa4c2ad,$00000000
-	dc.l	$3ffe0000,$99d722da,$bde58f06,$00000000
-	dc.l	$3ffe0000,$825efced,$49369330,$00000000
-	dc.l	$3ffe0000,$9868c809,$868c8098,$00000000
-	dc.l	$3ffe0000,$84c37a7a,$b9a905c9,$00000000
-	dc.l	$3ffe0000,$97012e02,$5c04b809,$00000000
-	dc.l	$3ffe0000,$87224c2e,$8e645fb7,$00000000
-	dc.l	$3ffe0000,$95a02568,$095a0257,$00000000
-	dc.l	$3ffe0000,$897b8cac,$9f7de298,$00000000
-	dc.l	$3ffe0000,$94458094,$45809446,$00000000
-	dc.l	$3ffe0000,$8bcf55de,$c4cd05fe,$00000000
-	dc.l	$3ffe0000,$92f11384,$0497889c,$00000000
-	dc.l	$3ffe0000,$8e1dc0fb,$89e125e5,$00000000
-	dc.l	$3ffe0000,$91a2b3c4,$d5e6f809,$00000000
-	dc.l	$3ffe0000,$9066e68c,$955b6c9b,$00000000
-	dc.l	$3ffe0000,$905a3863,$3e06c43b,$00000000
-	dc.l	$3ffe0000,$92aade74,$c7be59e0,$00000000
-	dc.l	$3ffe0000,$8f1779d9,$fdc3a219,$00000000
-	dc.l	$3ffe0000,$94e9bff6,$15845643,$00000000
-	dc.l	$3ffe0000,$8dda5202,$37694809,$00000000
-	dc.l	$3ffe0000,$9723a1b7,$20134203,$00000000
-	dc.l	$3ffe0000,$8ca29c04,$6514e023,$00000000
-	dc.l	$3ffe0000,$995899c8,$90eb8990,$00000000
-	dc.l	$3ffe0000,$8b70344a,$139bc75a,$00000000
-	dc.l	$3ffe0000,$9b88bdaa,$3a3dae2f,$00000000
-	dc.l	$3ffe0000,$8a42f870,$5669db46,$00000000
-	dc.l	$3ffe0000,$9db4224f,$ffe1157c,$00000000
-	dc.l	$3ffe0000,$891ac73a,$e9819b50,$00000000
-	dc.l	$3ffe0000,$9fdadc26,$8b7a12da,$00000000
-	dc.l	$3ffe0000,$87f78087,$f78087f8,$00000000
-	dc.l	$3ffe0000,$a1fcff17,$ce733bd4,$00000000
-	dc.l	$3ffe0000,$86d90544,$7a34acc6,$00000000
-	dc.l	$3ffe0000,$a41a9e8f,$5446fb9f,$00000000
-	dc.l	$3ffe0000,$85bf3761,$2cee3c9b,$00000000
-	dc.l	$3ffe0000,$a633cd7e,$6771cd8b,$00000000
-	dc.l	$3ffe0000,$84a9f9c8,$084a9f9d,$00000000
-	dc.l	$3ffe0000,$a8489e60,$0b435a5e,$00000000
-	dc.l	$3ffe0000,$83993052,$3fbe3368,$00000000
-	dc.l	$3ffe0000,$aa59233c,$cca4bd49,$00000000
-	dc.l	$3ffe0000,$828cbfbe,$b9a020a3,$00000000
-	dc.l	$3ffe0000,$ac656dae,$6bcc4985,$00000000
-	dc.l	$3ffe0000,$81848da8,$faf0d277,$00000000
-	dc.l	$3ffe0000,$ae6d8ee3,$60bb2468,$00000000
-	dc.l	$3ffe0000,$80808080,$80808081,$00000000
-	dc.l	$3ffe0000,$b07197a2,$3c46c654,$00000000
-	dc.l	$f2104800,$2d7c0000,$0000ff54,$22103228
-	dc.l	$00042d50,$ff842d68,$0004ff88,$2d680008
-	dc.l	$ff8c0c81,$00000000,$6d000182,$0c813ffe
-	dc.l	$f07d6d0a,$0c813fff,$88416f00,$00e2e081
-	dc.l	$e0810481,$00003fff,$d2aeff54,$41faf7b2
-	dc.l	$f2014080,$2d7c3fff,$0000ff84,$2d6eff88
-	dc.l	$ff9402ae,$fe000000,$ff9400ae,$01000000
-	dc.l	$ff94222e,$ff940281,$7e000000,$e081e081
-	dc.l	$e881d1c1,$f22e4800,$ff842d7c,$3fff0000
-	dc.l	$ff9042ae,$ff98f22e,$4828ff90,$f227e00c
-	dc.l	$f2104823,$f23a48a3,$f6c8f200,$0100f200
-	dc.l	$0923f22e,$6880ff84,$f2000980,$f2000880
-	dc.l	$f23a54a3,$f6ccf23a,$5523f6ce,$f23a54a2
-	dc.l	$f6d0f23a,$5522f6d2,$f2000ca3,$f2000d23
-	dc.l	$f23a54a2,$f6ccf23a,$5522f6ce,$f2000ca3
-	dc.l	$d1fc0000,$0010f200,$0d23f200,$00a3f200
-	dc.l	$0822f210,$48a2f21f,$d030f200,$0422f200
-	dc.l	$9000f22e,$4822ff84,$60ff0000,$10ccf23c
-	dc.l	$58380001,$f2c10000,$1318f200,$0080f23a
-	dc.l	$44a8f64e,$f23a4422,$f648f200,$04a2f200
-	dc.l	$00a0f227,$e00cf200,$0400f200,$0023f22e
-	dc.l	$6880ff84,$f2000080,$f20004a3,$f23a5580
-	dc.l	$f660f23a,$5500f662,$f20005a3,$f2000523
-	dc.l	$f23a55a2,$f65cf23a,$5522f65e,$f2000ca3
-	dc.l	$f2000123,$f23a54a2,$f658f22e,$4823ff84
-	dc.l	$f20008a2,$f21fd030,$f2000423,$f2009000
-	dc.l	$f22e4822,$ff8460ff,$0000103e,$60ff0000
-	dc.l	$0e962d7c,$ffffff9c,$ff5448e7,$3f002610
-	dc.l	$28280004,$2a280008,$42824a84,$66342805
-	dc.l	$42857420,$4286edc4,$6000edac,$d4862d43
-	dc.l	$ff842d44,$ff882d45,$ff8c4482,$2d42ff54
-	dc.l	$f22e4800,$ff844cdf,$00fc41ee,$ff846000
-	dc.l	$fe0c4286,$edc46000,$2406edac,$2e05edad
-	dc.l	$44860686,$00000020,$ecaf8887,$2d43ff84
-	dc.l	$2d44ff88,$2d45ff8c,$44822d42,$ff54f22e
-	dc.l	$4800ff84,$4cdf00fc,$41eeff84,$6000fdce
-	dc.l	$f2104800,$f2000018,$f23a4838,$f5a4f292
-	dc.l	$0014f200,$9000123c,$0003f210,$480060ff
-	dc.l	$00000f7e,$f2104800,$2d7c0000,$0000ff54
-	dc.l	$f2000080,$f23a4422,$f508f22e,$6800ff84
-	dc.l	$3d6eff88,$ff86222e,$ff840c81,$00000000
-	dc.l	$6f0000da,$0c813ffe,$80006d00,$fda20c81
-	dc.l	$3fffc000,$6e00fd98,$0c813ffe,$f07d6d00
-	dc.l	$001a0c81,$3fff8841,$6e000010,$f20004a2
-	dc.l	$f23a4422,$f4bc6000,$fe762d6e,$ff88ff94
-	dc.l	$02aefe00,$0000ff94,$00ae0100,$0000ff94
-	dc.l	$0c813fff,$80006c44,$f23a4400,$f4fc2d7c
-	dc.l	$3fff0000,$ff9042ae,$ff98f22e,$4828ff90
-	dc.l	$222eff94,$02817e00,$0000e081,$e081e881
-	dc.l	$f20004a2,$f227e00c,$f2000422,$41faf4e2
-	dc.l	$d1c1f23a,$4480f466,$6000fd76,$f23a4400
-	dc.l	$f4502d7c,$3fff0000,$ff9042ae,$ff98f22e
-	dc.l	$4828ff90,$222eff94,$02817e00,$0000e081
-	dc.l	$e081e881,$f2000422,$f227e00c,$41faf4a2
-	dc.l	$d1c1f23a,$4480f41e,$6000fd36,$0c810000
-	dc.l	$00006d10,$f23a4400,$f414f200,$900060ff
-	dc.l	$00000c4e,$f23a4400,$f3fcf200,$900060ff
-	dc.l	$00000cb4,$60ff0000,$0e962210,$32280004
-	dc.l	$02817fff,$ffff0c81,$3fff8000,$6c56f210
-	dc.l	$4818f200,$0080f200,$049af200,$0022f23c
-	dc.l	$44a23f80,$0000f200,$04202210,$02818000
-	dc.l	$00000081,$3f000000,$2f012f00,$4280f227
-	dc.l	$e00141d7,$61ffffff,$fe5adffc,$0000000c
-	dc.l	$201ff200,$9000123c,$0000f21f,$442360ff
-	dc.l	$00000dde,$f2104818,$f23c4438,$3f800000
-	dc.l	$f2d20000,$0c3260ff,$00000bb6,$60ff0000
-	dc.l	$0e0e3ffd,$0000de5b,$d8a93728,$71950000
-	dc.l	$00003fff,$0000b8aa,$3b295c17,$f0bc0000
-	dc.l	$0000f23c,$58000001,$f2104838,$f2c10000
-	dc.l	$0ff02210,$6d000090,$2f004280,$61ffffff
-	dc.l	$fba2f21f,$9000f23a,$4823ffb8,$60ff0000
-	dc.l	$0d782210,$6d000070,$2f004280,$61ffffff
-	dc.l	$fd34f21f,$9000f23a,$4823ff98,$60ff0000
-	dc.l	$0d682210,$6d000050,$22280008,$662e2228
-	dc.l	$00040281,$7fffffff,$66223210,$02810000
-	dc.l	$7fff0481,$00003fff,$67ff0000,$0f84f200
-	dc.l	$9000f201,$400060ff,$00000d1e,$2f004280
-	dc.l	$61ffffff,$fb2ef21f,$9000f23a,$4823ff54
-	dc.l	$60ff0000,$0d0460ff,$00000b5c,$22106d00
-	dc.l	$fff62f00,$428061ff,$fffffcba,$f21f9000
-	dc.l	$f23a4823,$ff2e60ff,$00000cee,$406a934f
-	dc.l	$0979a371,$3f734413,$509f8000,$bfcd0000
-	dc.l	$c0219dc1,$da994fd2,$00000000,$40000000
-	dc.l	$935d8ddd,$aaa8ac17,$00000000,$3ffe0000
-	dc.l	$b17217f7,$d1cf79ac,$00000000,$3f56c16d
-	dc.l	$6f7bd0b2,$3f811112,$302c712c,$3fa55555
-	dc.l	$55554cc1,$3fc55555,$55554a54,$3fe00000
-	dc.l	$00000000,$00000000,$00000000,$3fff0000
-	dc.l	$80000000,$00000000,$3f738000,$3fff0000
-	dc.l	$8164d1f3,$bc030773,$3fbef7ca,$3fff0000
-	dc.l	$82cd8698,$ac2ba1d7,$3fbdf8a9,$3fff0000
-	dc.l	$843a28c3,$acde4046,$3fbcd7c9,$3fff0000
-	dc.l	$85aac367,$cc487b15,$bfbde8da,$3fff0000
-	dc.l	$871f6196,$9e8d1010,$3fbde85c,$3fff0000
-	dc.l	$88980e80,$92da8527,$3fbebbf1,$3fff0000
-	dc.l	$8a14d575,$496efd9a,$3fbb80ca,$3fff0000
-	dc.l	$8b95c1e3,$ea8bd6e7,$bfba8373,$3fff0000
-	dc.l	$8d1adf5b,$7e5ba9e6,$bfbe9670,$3fff0000
-	dc.l	$8ea4398b,$45cd53c0,$3fbdb700,$3fff0000
-	dc.l	$9031dc43,$1466b1dc,$3fbeeeb0,$3fff0000
-	dc.l	$91c3d373,$ab11c336,$3fbbfd6d,$3fff0000
-	dc.l	$935a2b2f,$13e6e92c,$bfbdb319,$3fff0000
-	dc.l	$94f4efa8,$fef70961,$3fbdba2b,$3fff0000
-	dc.l	$96942d37,$20185a00,$3fbe91d5,$3fff0000
-	dc.l	$9837f051,$8db8a96f,$3fbe8d5a,$3fff0000
-	dc.l	$99e04593,$20b7fa65,$bfbcde7b,$3fff0000
-	dc.l	$9b8d39b9,$d54e5539,$bfbebaaf,$3fff0000
-	dc.l	$9d3ed9a7,$2cffb751,$bfbd86da,$3fff0000
-	dc.l	$9ef53260,$91a111ae,$bfbebedd,$3fff0000
-	dc.l	$a0b0510f,$b9714fc2,$3fbcc96e,$3fff0000
-	dc.l	$a2704303,$0c496819,$bfbec90b,$3fff0000
-	dc.l	$a43515ae,$09e6809e,$3fbbd1db,$3fff0000
-	dc.l	$a5fed6a9,$b15138ea,$3fbce5eb,$3fff0000
-	dc.l	$a7cd93b4,$e965356a,$bfbec274,$3fff0000
-	dc.l	$a9a15ab4,$ea7c0ef8,$3fbea83c,$3fff0000
-	dc.l	$ab7a39b5,$a93ed337,$3fbecb00,$3fff0000
-	dc.l	$ad583eea,$42a14ac6,$3fbe9301,$3fff0000
-	dc.l	$af3b78ad,$690a4375,$bfbd8367,$3fff0000
-	dc.l	$b123f581,$d2ac2590,$bfbef05f,$3fff0000
-	dc.l	$b311c412,$a9112489,$3fbdfb3c,$3fff0000
-	dc.l	$b504f333,$f9de6484,$3fbeb2fb,$3fff0000
-	dc.l	$b6fd91e3,$28d17791,$3fbae2cb,$3fff0000
-	dc.l	$b8fbaf47,$62fb9ee9,$3fbcdc3c,$3fff0000
-	dc.l	$baff5ab2,$133e45fb,$3fbee9aa,$3fff0000
-	dc.l	$bd08a39f,$580c36bf,$bfbeaefd,$3fff0000
-	dc.l	$bf1799b6,$7a731083,$bfbcbf51,$3fff0000
-	dc.l	$c12c4cca,$66709456,$3fbef88a,$3fff0000
-	dc.l	$c346ccda,$24976407,$3fbd83b2,$3fff0000
-	dc.l	$c5672a11,$5506dadd,$3fbdf8ab,$3fff0000
-	dc.l	$c78d74c8,$abb9b15d,$bfbdfb17,$3fff0000
-	dc.l	$c9b9bd86,$6e2f27a3,$bfbefe3c,$3fff0000
-	dc.l	$cbec14fe,$f2727c5d,$bfbbb6f8,$3fff0000
-	dc.l	$ce248c15,$1f8480e4,$bfbcee53,$3fff0000
-	dc.l	$d06333da,$ef2b2595,$bfbda4ae,$3fff0000
-	dc.l	$d2a81d91,$f12ae45a,$3fbc9124,$3fff0000
-	dc.l	$d4f35aab,$cfedfa1f,$3fbeb243,$3fff0000
-	dc.l	$d744fcca,$d69d6af4,$3fbde69a,$3fff0000
-	dc.l	$d99d15c2,$78afd7b6,$bfb8bc61,$3fff0000
-	dc.l	$dbfbb797,$daf23755,$3fbdf610,$3fff0000
-	dc.l	$de60f482,$5e0e9124,$bfbd8be1,$3fff0000
-	dc.l	$e0ccdeec,$2a94e111,$3fbacb12,$3fff0000
-	dc.l	$e33f8972,$be8a5a51,$3fbb9bfe,$3fff0000
-	dc.l	$e5b906e7,$7c8348a8,$3fbcf2f4,$3fff0000
-	dc.l	$e8396a50,$3c4bdc68,$3fbef22f,$3fff0000
-	dc.l	$eac0c6e7,$dd24392f,$bfbdbf4a,$3fff0000
-	dc.l	$ed4f301e,$d9942b84,$3fbec01a,$3fff0000
-	dc.l	$efe4b99b,$dcdaf5cb,$3fbe8cac,$3fff0000
-	dc.l	$f281773c,$59ffb13a,$bfbcbb3f,$3fff0000
-	dc.l	$f5257d15,$2486cc2c,$3fbef73a,$3fff0000
-	dc.l	$f7d0df73,$0ad13bb9,$bfb8b795,$3fff0000
-	dc.l	$fa83b2db,$722a033a,$3fbef84b,$3fff0000
-	dc.l	$fd3e0c0c,$f486c175,$bfbef581,$f210d080
-	dc.l	$22103228,$0004f22e,$6800ff84,$02817fff
-	dc.l	$ffff0c81,$3fb98000,$6c046000,$00880c81
-	dc.l	$400d80c0,$6f046000,$007cf200,$0080f23c
-	dc.l	$44a34280,$0000f22e,$6080ff54,$2f0243fa
-	dc.l	$fbbcf22e,$4080ff54,$222eff54,$24010281
-	dc.l	$0000003f,$e981d3c1,$ec822202,$e2819481
-	dc.l	$06820000,$3ffff227,$e00cf23c,$44a33c80
-	dc.l	$00002d59,$ff842d59,$ff882d59,$ff8c3d59
-	dc.l	$ff90f200,$04283d59,$ff94426e,$ff9642ae
-	dc.l	$ff98d36e,$ff84f23a,$4823fb22,$d36eff90
-	dc.l	$60000100,$0c813fff,$80006e12,$f2009000
-	dc.l	$f23c4422,$3f800000,$60ff0000,$07b4222e
-	dc.l	$ff840c81,$00000000,$6d0660ff,$00000764
-	dc.l	$60ff0000,$0666f200,$9000f23c,$44003f80
-	dc.l	$00002210,$00810080,$0001f201,$442260ff
-	dc.l	$0000077e,$f210d080,$22103228,$0004f22e
-	dc.l	$6800ff84,$02817fff,$ffff0c81,$3fb98000
-	dc.l	$6c046000,$ff900c81,$400b9b07,$6f046000
-	dc.l	$ff84f200,$0080f23a,$54a3fa62,$f22e6080
-	dc.l	$ff542f02,$43fafac6,$f22e4080,$ff54222e
-	dc.l	$ff542401,$02810000,$003fe981,$d3c1ec82
-	dc.l	$2202e281,$94810682,$00003fff,$f227e00c
-	dc.l	$f2000500,$f23a54a3,$fa2c2d59,$ff84f23a
-	dc.l	$4923fa2a,$2d59ff88,$2d59ff8c,$f2000428
-	dc.l	$3d59ff90,$f2000828,$3d59ff94,$426eff96
-	dc.l	$42aeff98,$f23a4823,$fa14d36e,$ff84d36e
-	dc.l	$ff90f200,$0080f200,$04a3f23a,$5500fa1e
-	dc.l	$f23a5580,$fa20f200,$0523f200,$05a3f23a
-	dc.l	$5522fa1a,$f23a55a2,$fa1cf200,$0523f200
-	dc.l	$05a3f23a,$5522fa16,$f20001a3,$f2000523
-	dc.l	$f2000c22,$f2000822,$f21fd030,$f22e4823
-	dc.l	$ff84f22e,$4822ff90,$f22e4822,$ff84f200
-	dc.l	$90003d42,$ff84241f,$2d7c8000,$0000ff88
-	dc.l	$42aeff8c,$123c0000,$f22e4823,$ff8460ff
-	dc.l	$0000063e,$f2009000,$f23c4400,$3f800000
-	dc.l	$22100081,$00800001,$f2014422,$60ff0000
-	dc.l	$06302f00,$32290000,$5beeff54,$02810000
-	dc.l	$7fff3028,$00000240,$7fff0c40,$3fff6d00
-	dc.l	$00c00c40,$400c6e00,$00a4f228,$48030000
-	dc.l	$f2006000,$f23c8800,$00000000,$4a290004
-	dc.l	$6b5e2f00,$3d690000,$ff842d69,$0004ff88
-	dc.l	$2d690008,$ff8c41ee,$ff8461ff,$00000b2a
-	dc.l	$4480d09f,$f22ed080,$ff840c40,$c0016c36
-	dc.l	$f21f9000,$223c8000,$00000480,$ffffc001
-	dc.l	$44800c00,$00206c0a,$e0a942a7,$2f0142a7
-	dc.l	$60280400,$0020e0a9,$2f0142a7,$42a7601a
-	dc.l	$f229d080,$0000f21f,$90000640,$3fff4840
-	dc.l	$42a72f3c,$80000000,$2f00f200,$b000123c
-	dc.l	$0000f21f,$482360ff,$0000054c,$201fc149
-	dc.l	$4a290000,$6bff0000,$041c60ff,$00000464
-	dc.l	$4a290004,$6a16201f,$f2009000,$123c0003
-	dc.l	$f2294800,$000060ff,$0000051c,$201f2049
-	dc.l	$60ff0000,$05860001,$00008000,$00000000
-	dc.l	$00000000,$0000422e,$ff652f00,$422eff5c
-	dc.l	$600c422e,$ff652f00,$1d7c0001,$ff5c48e7
-	dc.l	$3f003628,$00003d43,$ff580283,$00007fff
-	dc.l	$28280004,$2a280008,$4a83663c,$263c0000
-	dc.l	$3ffe4a84,$66162805,$42850483,$00000020
-	dc.l	$4286edc4,$6000edac,$96866022,$4286edc4
-	dc.l	$60009686,$edac2e05,$edad4486,$06860000
-	dc.l	$0020ecaf,$88876006,$06830000,$3ffe3029
-	dc.l	$00003d40,$ff5a322e,$ff58b181,$02810000
-	dc.l	$80003d41,$ff5e0280,$00007fff,$22290004
-	dc.l	$24290008,$4a80663c,$203c0000,$3ffe4a81
-	dc.l	$66162202,$42820480,$00000020,$4286edc1
-	dc.l	$6000eda9,$90866022,$4286edc1,$60009086
-	dc.l	$eda92e02,$edaa4486,$06860000,$0020ecaf
-	dc.l	$82876006,$06800000,$3ffe2d43,$ff542f00
-	dc.l	$90834286,$4283227c,$00000000,$4a806c06
-	dc.l	$201f6000,$006a588f,$4a866e0e,$b2846608
-	dc.l	$b4856604,$60000136,$65089485,$93844286
-	dc.l	$52834a80,$670ed683,$d482e391,$55c65289
-	dc.l	$538060d4,$202eff54,$4a816616,$22024282
-	dc.l	$04800000,$00204286,$edc16000,$eda99086
-	dc.l	$601c4286,$edc16000,$6b149086,$eda92e02
-	dc.l	$edaa4486,$06860000,$0020ecaf,$82870c80
-	dc.l	$000041fe,$6c2a3d40,$ff902d41,$ff942d42
-	dc.l	$ff982c2e,$ff543d46,$ff842d44,$ff882d45
-	dc.l	$ff8cf22e,$4800ff90,$1d7c0001,$ff5d6036
-	dc.l	$2d41ff94,$2d42ff98,$04800000,$3ffe3d40
-	dc.l	$ff902c2e,$ff540486,$00003ffe,$2d46ff54
-	dc.l	$f22e4800,$ff903d46,$ff842d44,$ff882d45
-	dc.l	$ff8c422e,$ff5d4a2e,$ff5c6722,$2c2eff54
-	dc.l	$5386b086,$6d186e0e,$b2846608,$b4856604
-	dc.l	$6000007a,$6508f22e,$4828ff84,$52833c2e
-	dc.l	$ff5a6c04,$f200001a,$42863c2e,$ff5e7e08
-	dc.l	$eeae0283,$0000007f,$86861d43,$ff654cdf
-	dc.l	$00fc201f,$f2009000,$4a2eff5d,$6710123c
-	dc.l	$0000f23a,$4823fdc0,$60ff0000,$02ca123c
-	dc.l	$0003f200,$000060ff,$000002bc,$52830c80
-	dc.l	$00000008,$6c04e1ab,$60024283,$f23c4400
-	dc.l	$00000000,$422eff5d,$6000ff94,$2c030286
-	dc.l	$00000001,$4a866700,$ff865283,$3c2eff5a
-	dc.l	$0a860000,$80003d46,$ff5a6000,$ff723028
-	dc.l	$00000240,$7fff0c40,$7fff6738,$08280007
-	dc.l	$00046706,$103c0000,$4e754a40,$66184aa8
-	dc.l	$0004660c,$4aa80008,$6606103c,$00014e75
-	dc.l	$103c0004,$4e7561ff,$000007f6,$4e75103c
-	dc.l	$00064e75,$4aa80008,$66122028,$00040280
-	dc.l	$7fffffff,$6606103c,$00024e75,$103c0003
-	dc.l	$4e757fff,$0000ffff,$ffffffff,$ffff4a28
-	dc.l	$00006a38,$00ae0a00,$0410ff64,$082e0002
-	dc.l	$ff62660a,$f23c4400,$ff800000,$4e75f22e
-	dc.l	$d080ffdc,$f22e9000,$ff60f23c,$4480bf80
-	dc.l	$0000f23c,$44a00000,$00004e75,$00ae0200
-	dc.l	$0410ff64,$082e0002,$ff62660a,$f23c4400
-	dc.l	$7f800000,$4e75f22e,$d080ffdc,$f22e9000
-	dc.l	$ff60f23c,$44803f80,$0000f23c,$44a00000
-	dc.l	$00004e75,$00ae0100,$2080ff64,$082e0005
-	dc.l	$ff626608,$f23ad080,$ff6a4e75,$f22ed080
-	dc.l	$ffdcf22e,$9000ff60,$f227e004,$f23c4500
-	dc.l	$7f800000,$f23c4523,$00000000,$f21fd020
-	dc.l	$4e757ffe,$0000ffff,$ffffffff,$fffffffe
-	dc.l	$0000ffff,$ffffffff,$ffff0000,$00008000
-	dc.l	$00000000,$00008000,$00008000,$00000000
-	dc.l	$00004a28,$00006a26,$00ae0800,$0a28ff64
-	dc.l	$f22e9000,$ff60f23a,$d080ffdc,$f23a4823
-	dc.l	$ffcaf200,$a800e198,$1d40ff64,$4e75006e
-	dc.l	$0a28ff66,$f22e9000,$ff60f23a,$d080ffac
-	dc.l	$f2000023,$f200a800,$e1981d40,$ff644e75
-	dc.l	$00ae0000,$1048ff64,$12000201,$00c06700
-	dc.l	$005a3d68,$0000ff84,$2d680004,$ff882d68
-	dc.l	$0008ff8c,$41eeff84,$48e7c080,$61ff0000
-	dc.l	$06184cdf,$01030c01,$00406610,$4aa80008
-	dc.l	$66184a28,$00076612,$60000020,$22280008
-	dc.l	$02810000,$07ff6700,$001200ae,$00000200
-	dc.l	$ff646006,$006e1248,$ff664a28,$00006a22
-	dc.l	$f22e9000,$ff60f23a,$d080ff14,$f23a4823
-	dc.l	$ff02f200,$a800e198,$00000000,$1d40ff64
-	dc.l	$4e75f22e,$9000ff60,$f23ad080,$fee6f23a
-	dc.l	$4823fee0,$f200a800,$e1981d40,$ff644e75
-	dc.l	$006e1248,$ff66f22e,$9000ff60,$f23ad080
-	dc.l	$fec2f23a,$4823febc,$f200a800,$e1981d40
-	dc.l	$ff644e75,$f200a800,$81aeff64,$6020f200
-	dc.l	$a80081ae,$ff64f294,$000ef281,$0032006e
-	dc.l	$0208ff66,$600800ae,$08000208,$ff64082e
-	dc.l	$0001ff62,$66024e75,$f22e9000,$ff60f23c
-	dc.l	$44803f80,$0000f23a,$48a2fe80,$4e751d7c
-	dc.l	$0004ff64,$006e0208,$ff664e75,$f22e9000
-	dc.l	$ff60f228,$48000000,$f200a800,$00800000
-	dc.l	$0a2881ae,$ff644e75,$f22e9000,$ff60f228
-	dc.l	$48000000,$f200a800,$81aeff64,$4e754e75
-	dc.l	$f2294800,$00004a29,$00006b08,$1d7c0001
-	dc.l	$ff644e75,$1d7c0009,$ff644e75,$f2284800
-	dc.l	$00004a28,$00006b08,$1d7c0001,$ff644e75
-	dc.l	$1d7c0009,$ff644e75,$f227b000,$f23c9000
-	dc.l	$00000000,$f22f4400,$0008f21f,$9000f22f
-	dc.l	$44220008,$4e75f227,$b000f23c,$90000000
-	dc.l	$0000f22f,$54000008,$f21f9000,$f22f5422
-	dc.l	$000c4e75,$f22fd080,$0004f22f,$48220010
-	dc.l	$4e75f227,$b000f23c,$90000000,$0000f22f
-	dc.l	$44000008,$f21f9000,$f22f4428,$00084e75
-	dc.l	$f227b000,$f23c9000,$00000000,$f22f5400
-	dc.l	$0008f21f,$9000f22f,$5428000c,$4e75f22f
-	dc.l	$d0800004,$f22f4828,$00104e75,$f227b000
-	dc.l	$f23c9000,$00000000,$f22f4400,$0008f21f
-	dc.l	$9000f22f,$44230008,$4e75f227,$b000f23c
-	dc.l	$90000000,$0000f22f,$54000008,$f21f9000
-	dc.l	$f22f5423,$000c4e75,$f22fd080,$0004f22f
-	dc.l	$48230010,$4e75f227,$b000f23c,$90000000
-	dc.l	$0000f22f,$44000008,$f21f9000,$f22f4420
-	dc.l	$00084e75,$f227b000,$f23c9000,$00000000
-	dc.l	$f22f5400,$0008f21f,$9000f22f,$5420000c
-	dc.l	$4e75f22f,$d0800004,$f22f4820,$00104e75
-	dc.l	$f22f4418,$00044e75,$f22f5418,$00044e75
-	dc.l	$f22f4818,$00044e75,$f22f441a,$00044e75
-	dc.l	$f22f541a,$00044e75,$f22f481a,$00044e75
-	dc.l	$f22f4404,$00044e75,$f22f5404,$00044e75
-	dc.l	$f22f4804,$00044e75,$f22f4401,$00044e75
-	dc.l	$f22f5401,$00044e75,$f22f4801,$00044e75
-	dc.l	$f22f4403,$00044e75,$f22f5403,$00044e75
-	dc.l	$f22f4803,$00044e75,$4a280000,$6b10f23c
-	dc.l	$44000000,$00001d7c,$0004ff64,$4e75f23c
-	dc.l	$44008000,$00001d7c,$000cff64,$4e754a29
-	dc.l	$00006bea,$60d84a28,$00006b10,$f23c4400
-	dc.l	$7f800000,$1d7c0002,$ff644e75,$f23c4400
-	dc.l	$ff800000,$1d7c000a,$ff644e75,$4a290000
-	dc.l	$6bea60d8,$4a280000,$6ba460d0,$4a280000
-	dc.l	$6b00fba2,$60c64a28,$00006b16,$60be4a28
-	dc.l	$00006b0e,$f23c4400,$3f800000,$422eff64
-	dc.l	$4e75f23c,$4400bf80,$00001d7c,$0008ff64
-	dc.l	$4e753fff,$0000c90f,$daa22168,$c235bfff
-	dc.l	$0000c90f,$daa22168,$c2354a28,$00006b0e
-	dc.l	$f2009000,$f23a4800,$ffda6000,$fcf2f200
-	dc.l	$9000f23a,$4800ffd8,$6000fcec,$f23c4480
-	dc.l	$3f800000,$4a280000,$6a10f23c,$44008000
-	dc.l	$00001d7c,$000cff64,$4e75f23c,$44000000
-	dc.l	$00001d7c,$0004ff64,$4e75f23a,$4880fa84
-	dc.l	$6000fb02,$f2284880,$00006000,$fd30122e
-	dc.l	$ff4f67ff,$fffff782,$0c010001,$67000078
-	dc.l	$0c010002,$67ffffff,$fade0c01,$000467ff
-	dc.l	$fffff766,$60ffffff,$fcea122e,$ff4f67ff
-	dc.l	$fffffac4,$0c010001,$67ffffff,$faba0c01
-	dc.l	$000267ff,$fffffab0,$0c010004,$67ffffff
-	dc.l	$faa660ff,$fffffcbc,$122eff4f,$67ff0000
-	dc.l	$00440c01,$000167ff,$0000001e,$0c010002
-	dc.l	$67ffffff,$fa820c01,$000467ff,$00000026
-	dc.l	$60ffffff,$fc8e1228,$00001029,$0000b101
-	dc.l	$02010080,$1d41ff65,$4a006a00,$fe526000
-	dc.l	$fe5e422e,$ff652f00,$12280000,$10290000
-	dc.l	$b1010201,$00801d41,$ff650c2e,$0004ff4f
-	dc.l	$660c41e9,$0000201f,$60ffffff,$fc2ef21f
-	dc.l	$9000f229,$48000000,$4a290000,$6b024e75
-	dc.l	$1d7c0008,$ff644e75,$122eff4f,$67ffffff
-	dc.l	$f6a40c01,$00016700,$ff8e0c01,$000267ff
-	dc.l	$fffff9f4,$0c010004,$67ffffff,$f68860ff
-	dc.l	$fffffc00,$122eff4f,$67ffffff,$f9da0c01
-	dc.l	$000167ff,$fffff9d0,$0c010002,$67ffffff
-	dc.l	$f9c60c01,$000467ff,$fffff9bc,$60ffffff
-	dc.l	$fbd2122e,$ff4f6700,$ff5a0c01,$00016700
-	dc.l	$ff360c01,$000267ff,$fffff99c,$0c010004
-	dc.l	$67ffffff,$ff4060ff,$fffffba8,$122eff4f
-	dc.l	$67ffffff,$f5000c01,$000167ff,$fffffd92
-	dc.l	$0c010002,$67ffffff,$fdb60c01,$000467ff
-	dc.l	$fffff4e2,$60ffffff,$fb7a122e,$ff4f67ff
-	dc.l	$fffff4d2,$0c010001,$67ffffff,$fd640c01
-	dc.l	$000267ff,$fffffd88,$0c010004,$67ffffff
-	dc.l	$f4b460ff,$fffffb4c,$122eff4f,$67ffffff
-	dc.l	$f9260c01,$000367ff,$fffffb38,$60ffffff
-	dc.l	$f916122e,$ff4f0c01,$000367ff,$fffffb24
-	dc.l	$60ffffff,$fb3a2f02,$2f032028,$00042228
-	dc.l	$0008edc0,$2000671a,$e5a8e9c1,$30228083
-	dc.l	$e5a92140,$00042141,$00082002,$261f241f
-	dc.l	$4e75edc1,$2000e5a9,$06820000,$00202141
-	dc.l	$000442a8,$00082002,$261f241f,$4e75ede8
-	dc.l	$00000004,$660eede8,$00000008,$67000074
-	dc.l	$06400020,$42813228,$00000241,$7fffb041
-	dc.l	$6e1c9240,$30280000,$02408000,$82403141
-	dc.l	$000061ff,$ffffff82,$103c0000,$4e750c01
-	dc.l	$00206e20,$e9e80840,$00042140,$00042028
-	dc.l	$0008e3a8,$21400008,$02688000,$0000103c
-	dc.l	$00044e75,$04410020,$20280008,$e3a82140
-	dc.l	$000442a8,$00080268,$80000000,$103c0004
-	dc.l	$4e750268,$80000000,$103c0001,$4e7551fc
diff --git a/ANDROID_3.4.5/arch/m68k/ifpsp060/fpsp.doc b/ANDROID_3.4.5/arch/m68k/ifpsp060/fpsp.doc
deleted file mode 100644
index 23d513f7..00000000
--- a/ANDROID_3.4.5/arch/m68k/ifpsp060/fpsp.doc
+++ /dev/null
@@ -1,295 +0,0 @@
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-MOTOROLA MICROPROCESSOR & MEMORY TECHNOLOGY GROUP
-M68000 Hi-Performance Microprocessor Division
-M68060 Software Package
-Production Release P1.00 -- October 10, 1994
-
-M68060 Software Package Copyright © 1993, 1994 Motorola Inc.  All rights reserved.
-
-THE SOFTWARE is provided on an "AS IS" basis and without warranty.
-To the maximum extent permitted by applicable law,
-MOTOROLA DISCLAIMS ALL WARRANTIES WHETHER EXPRESS OR IMPLIED,
-INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
-and any warranty against infringement with regard to the SOFTWARE
-(INCLUDING ANY MODIFIED VERSIONS THEREOF) and any accompanying written materials.
-
-To the maximum extent permitted by applicable law,
-IN NO EVENT SHALL MOTOROLA BE LIABLE FOR ANY DAMAGES WHATSOEVER
-(INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS,
-BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, OR OTHER PECUNIARY LOSS)
-ARISING OF THE USE OR INABILITY TO USE THE SOFTWARE.
-Motorola assumes no responsibility for the maintenance and support of the SOFTWARE.
-
-You are hereby granted a copyright license to use, modify, and distribute the SOFTWARE
-so long as this entire notice is retained without alteration in any modified and/or
-redistributed versions, and that such modified versions are clearly identified as such.
-No licenses are granted by implication, estoppel or otherwise under any patents
-or trademarks of Motorola, Inc.
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-68060 FLOATING-POINT SOFTWARE PACKAGE (Kernel version)
--------------------------------------------------------
-
-The file fpsp.sa contains the 68060 Floating-Point Software
-Package. This package is essentially a set of exception handlers
-that can be integrated into an operating system.
-These exception handlers emulate Unimplemented FP instructions,
-instructions using unimplemented data types, and instructions
-using unimplemented addressing modes. In addition, this package
-includes exception handlers to provide full IEEE-754 compliant
-exception handling.
-
-Release file format:
---------------------
-The file fpsp.sa is essentially a hexadecimal image of the
-release package. This is the ONLY format which will be supported.
-The hex image was created by assembling the source code and
-then converting the resulting binary output image into an
-ASCII text file. The hexadecimal numbers are listed
-using the Motorola Assembly Syntax assembler directive "dc.l"
-(define constant longword). The file can be converted to other
-assembly syntaxes by using any word processor with a global
-search and replace function.
-
-To assist in assembling and linking this module with other modules,
-the installer should add a symbolic label to the top of the file.
-This will allow calling routines to access the entry points
-of this package.
-
-The source code fpsp.s has also been included but only for
-documentation purposes.
-
-Release file structure:
------------------------
-
-(top of module)
-	-----------------
-	|		| - 128 byte-sized section
-   (1)  |   Call-Out	| - 4 bytes per entry (user fills these in)
-	|		| - example routines in fskeleton.s
-	-----------------
-	|		| - 8 bytes per entry
-   (2)  | Entry Point	| - user does "bra" or "jmp" to this address
-	|		|
-	-----------------
-	|		| - code section
-   (3)  ~		~
-	|		|
-	-----------------
-(bottom of module)
-
-The first section of this module is the "Call-out" section. This section
-is NOT INCLUDED in fpsp.sa (an example "Call-out" section is provided at
-the end of the file fskeleton.s). The purpose of this section is to allow
-the FPSP routines to reference external functions that must be provided
-by the host operating system. This section MUST be exactly 128 bytes in
-size. There are 32 fields, each 4 bytes in size. Each field corresponds
-to a function required by the FPSP (these functions and their location are
-listed in "68060FPSP call-outs" below). Each field entry should contain
-the address of the corresponding function RELATIVE to the starting address
-of the "call-out" section. The "Call-out" section must sit adjacent to the
-fpsp.sa image in memory.
-
-The second section, the "Entry-point" section, is used by external routines
-to access the functions within the FPSP. Since the fpsp.sa hex file contains
-no symbol names, this section contains function entry points that are fixed
-with respect to the top of the package. The currently defined entry-points
-are listed in section "68060 FPSP entry points" below. A calling routine
-would simply execute a "bra" or "jmp" that jumped to the selected function
-entry-point.
-
-For example, if the 68060 hardware took a "Line-F Emulator" exception
-(vector #11), the operating system should execute something similar to:
-
-	bra	_060FPSP_TOP+128+48
-
-(_060FPSP_TOP is the starting address of the "Call-out" section; the "Call-out"
-section is 128 bytes long; and the F-Line FPSP handler entry point is located
-48 bytes from the top of the "Entry-point" section.)
-
-The third section is the code section. After entering through an "Entry-point",
-the entry code jumps to the appropriate emulation code within the code section.
-
-68060FPSP call-outs: (details in fskeleton.s)
---------------------
-0x000:	_060_real_bsun
-0x004:	_060_real_snan
-0x008:	_060_real_operr
-0x00c:	_060_real_ovfl
-0x010:	_060_real_unfl
-0x014:	_060_real_dz
-0x018:	_060_real_inex
-0x01c:	_060_real_fline
-0x020:	_060_real_fpu_disabled
-0x024:	_060_real_trap
-0x028:	_060_real_trace
-0x02c:	_060_real_access
-0x030:	_060_fpsp_done
-
-0x034:	(Motorola reserved)
-0x038:	(Motorola reserved)
-0x03c:	(Motorola reserved)
-
-0x040:	_060_imem_read
-0x044:	_060_dmem_read
-0x048:	_060_dmem_write
-0x04c:	_060_imem_read_word
-0x050:	_060_imem_read_long
-0x054:	_060_dmem_read_byte
-0x058:	_060_dmem_read_word
-0x05c:	_060_dmem_read_long
-0x060:	_060_dmem_write_byte
-0x064:	_060_dmem_write_word
-0x068:	_060_dmem_write_long
-
-0x06c:	(Motorola reserved)
-0x070:	(Motorola reserved)
-0x074:	(Motorola reserved)
-0x078:	(Motorola reserved)
-0x07c:	(Motorola reserved)
-
-68060FPSP entry points:
------------------------
-0x000:	_060_fpsp_snan
-0x008:	_060_fpsp_operr
-0x010:	_060_fpsp_ovfl
-0x018:	_060_fpsp_unfl
-0x020:	_060_fpsp_dz
-0x028:	_060_fpsp_inex
-0x030:	_060_fpsp_fline
-0x038:	_060_fpsp_unsupp
-0x040:	_060_fpsp_effadd
-
-
-
-Miscellaneous:
---------------
-
-_060_fpsp_snan:
-----------------
-- documented in 3.5 of 060SP spec.
-- Basic flow:
-	exception taken ---> enter _060_fpsp_snan --|
-						    |
-            always exits through _060_real_snan <----
-
-_060_fpsp_operr:
-----------------
-- documented in 3.5 of 060SP spec.
-- Basic flow:
-	exception taken ---> enter _060_fpsp_operr --|
-						     |
-           always exits through _060_real_operr <-----
-
-_060_fpsp_dz:
-----------------
-- documented in 3.7 of 060SP spec.
-- Basic flow:
-	exception taken ---> enter _060_fpsp_dz   --|
-						    |
-            always exits through _060_real_dz   <----
-
-_060_fpsp_inex:
-----------------
-- documented in 3.6 of 060SP spec.
-- Basic flow:
-	exception taken ---> enter _060_fpsp_inex --|
-						    |
-            always exits through _060_real_inex <----
-
-
-_060_fpsp_ovfl:
-----------------
-- documented in 3.4 of 060SP spec.
-- Basic flow:
-	exception taken ---> enter _060_fpsp_ovfl --|
-						    |
-            may exit through _060_real_inex     <---|
-						 or |
-            may exit through _060_real_ovfl     <---|
-						 or |
-            may exit through _060_fpsp_done     <---|
-
-_060_fpsp_unfl:
-----------------
-- documented in 3.4 of 060SP spec.
-- Basic flow:
-	exception taken ---> enter _060_fpsp_unfl --|
-						    |
-            may exit through _060_real_inex     <---|
-						 or |
-            may exit through _060_real_unfl     <---|
-						 or |
-            may exit through _060_fpsp_done     <---|
-
-
-_060_fpsp_fline:
------------------
-- not fully documented in 060SP spec.
-- Basic flow:
-	exception taken ---> enter _060_fpsp_fline --|
-						     |
-            -------------------------------------------
-            |               |                     |
-            v               v                     v
-   (unimplemented   (fpu disabled)       (possible F-line illegal)
-     stack frame)           |                     v
-            |               v               special case "fmovecr"?
-            |         exit through                    |
-            |     _060_real_fpu_disabled        -------------
-            |                                   |           |
-            |               ^                   v           v
-            |               |                 (yes)        (no)
-            |               |                   v           v
-            |               |             fpu disabled?   exit through
-            |               |                   |         _060_real_fline
-            v               |             -------------
-            |               |             |           |
-            |               |             v           v
-            |               |-----------(yes)        (no)
-            |                                         |
-            |----<------------------------------------|
-            |
-            |
-            |----> may exit through _060_real_trace
-            |
-            |----> may exit through _060_real_trap
-            |
-            |----> may exit through _060_real_bsun
-            |
-            |----> may exit through _060_fpsp_done
-
-
-_060_fpsp_unsupp:
-------------------
-- documented in 3.1 of 060SP spec.
-- Basic flow:
-	exception taken ---> enter _060_fpsp_unsupp --|
-						      |
-						      |
-            may exit through _060_real_snan      <----|
-						  or  |
-            may exit through _060_real_operr     <----|
-						  or  |
-            may exit through _060_real_ovfl      <----|
-						  or  |
-            may exit through _060_real_unfl      <----|
-						  or  |
-            may exit through _060_real_inex      <----|
-						  or  |
-            may exit through _060_real_trace     <----|
-						  or  |
-            may exit through _060_fpsp_done      <----|
-
-
-_060_fpsp_effadd:
-------------------
-- documented in 3.3 of 060 spec.
-- Basic flow:
-	exception taken ---> enter _060_fpsp_effadd --|
-						      |
-						      |
-            may exit through _060_real_trace     <----|
-						  or  |
-     may exit through _060_real_fpu_disabled     <----|
-						  or  |
-            may exit through _060_fpsp_done      <----|
diff --git a/ANDROID_3.4.5/arch/m68k/ifpsp060/fpsp.sa b/ANDROID_3.4.5/arch/m68k/ifpsp060/fpsp.sa
deleted file mode 100644
index d69486a4..00000000
--- a/ANDROID_3.4.5/arch/m68k/ifpsp060/fpsp.sa
+++ /dev/null
@@ -1,3401 +0,0 @@
-	.long	0x60ff0000,0x17400000,0x60ff0000,0x15f40000
-	.long	0x60ff0000,0x02b60000,0x60ff0000,0x04700000
-	.long	0x60ff0000,0x1b100000,0x60ff0000,0x19aa0000
-	.long	0x60ff0000,0x1b5a0000,0x60ff0000,0x062e0000
-	.long	0x60ff0000,0x102c0000,0x51fc51fc,0x51fc51fc
-	.long	0x51fc51fc,0x51fc51fc,0x51fc51fc,0x51fc51fc
-	.long	0x51fc51fc,0x51fc51fc,0x51fc51fc,0x51fc51fc
-	.long	0x51fc51fc,0x51fc51fc,0x51fc51fc,0x51fc51fc
-	.long	0x2f00203a,0xff2c487b,0x0930ffff,0xfef8202f
-	.long	0x00044e74,0x00042f00,0x203afef2,0x487b0930
-	.long	0xfffffee2,0x202f0004,0x4e740004,0x2f00203a
-	.long	0xfee0487b,0x0930ffff,0xfecc202f,0x00044e74
-	.long	0x00042f00,0x203afed2,0x487b0930,0xfffffeb6
-	.long	0x202f0004,0x4e740004,0x2f00203a,0xfea4487b
-	.long	0x0930ffff,0xfea0202f,0x00044e74,0x00042f00
-	.long	0x203afe96,0x487b0930,0xfffffe8a,0x202f0004
-	.long	0x4e740004,0x2f00203a,0xfe7c487b,0x0930ffff
-	.long	0xfe74202f,0x00044e74,0x00042f00,0x203afe76
-	.long	0x487b0930,0xfffffe5e,0x202f0004,0x4e740004
-	.long	0x2f00203a,0xfe68487b,0x0930ffff,0xfe48202f
-	.long	0x00044e74,0x00042f00,0x203afe56,0x487b0930
-	.long	0xfffffe32,0x202f0004,0x4e740004,0x2f00203a
-	.long	0xfe44487b,0x0930ffff,0xfe1c202f,0x00044e74
-	.long	0x00042f00,0x203afe32,0x487b0930,0xfffffe06
-	.long	0x202f0004,0x4e740004,0x2f00203a,0xfe20487b
-	.long	0x0930ffff,0xfdf0202f,0x00044e74,0x00042f00
-	.long	0x203afe1e,0x487b0930,0xfffffdda,0x202f0004
-	.long	0x4e740004,0x2f00203a,0xfe0c487b,0x0930ffff
-	.long	0xfdc4202f,0x00044e74,0x00042f00,0x203afdfa
-	.long	0x487b0930,0xfffffdae,0x202f0004,0x4e740004
-	.long	0x2f00203a,0xfde8487b,0x0930ffff,0xfd98202f
-	.long	0x00044e74,0x00042f00,0x203afdd6,0x487b0930
-	.long	0xfffffd82,0x202f0004,0x4e740004,0x2f00203a
-	.long	0xfdc4487b,0x0930ffff,0xfd6c202f,0x00044e74
-	.long	0x00042f00,0x203afdb2,0x487b0930,0xfffffd56
-	.long	0x202f0004,0x4e740004,0x2f00203a,0xfda0487b
-	.long	0x0930ffff,0xfd40202f,0x00044e74,0x00042f00
-	.long	0x203afd8e,0x487b0930,0xfffffd2a,0x202f0004
-	.long	0x4e740004,0x2f00203a,0xfd7c487b,0x0930ffff
-	.long	0xfd14202f,0x00044e74,0x00042f00,0x203afd6a
-	.long	0x487b0930,0xfffffcfe,0x202f0004,0x4e740004
-	.long	0x40c62d38,0xd3d64634,0x3d6f90ae,0xb1e75cc7
-	.long	0x40000000,0xc90fdaa2,0x2168c235,0x00000000
-	.long	0x3fff0000,0xc90fdaa2,0x2168c235,0x00000000
-	.long	0x3fe45f30,0x6dc9c883,0x4e56ff40,0xf32eff6c
-	.long	0x48ee0303,0xff9cf22e,0xbc00ff60,0xf22ef0c0
-	.long	0xffdc2d6e,0xff68ff44,0x206eff44,0x58aeff44
-	.long	0x61ffffff,0xff042d40,0xff40082e,0x0005ff42
-	.long	0x66000116,0x41eeff6c,0x61ff0000,0x051c41ee
-	.long	0xff6c61ff,0x0000c1dc,0x1d40ff4e,0x082e0005
-	.long	0xff436726,0xe9ee0183,0xff4261ff,0x0000bd22
-	.long	0x41eeff78,0x61ff0000,0xc1ba0c00,0x00066606
-	.long	0x61ff0000,0xc11e1d40,0xff4f4280,0x102eff63
-	.long	0x122eff43,0x0241007f,0x02ae00ff,0x01ffff64
-	.long	0xf23c9000,0x00000000,0xf23c8800,0x00000000
-	.long	0x41eeff6c,0x43eeff78,0x223b1530,0x00007112
-	.long	0x4ebb1930,0x0000710a,0xe9ee0183,0xff4261ff
-	.long	0x0000bd4e,0x082e0004,0xff626622,0x082e0001
-	.long	0xff626644,0xf22ed0c0,0xffdcf22e,0x9c00ff60
-	.long	0x4cee0303,0xff9c4e5e,0x60ffffff,0xfcc6f22e
-	.long	0xf040ff6c,0x3d7ce005,0xff6ef22e,0xd0c0ffdc
-	.long	0xf22e9c00,0xff604cee,0x0303ff9c,0xf36eff6c
-	.long	0x4e5e60ff,0xfffffcb2,0xf22ef040,0xff6c1d7c
-	.long	0x00c4000b,0x3d7ce001,0xff6ef22e,0xd0c0ffdc
-	.long	0xf22e9c00,0xff604cee,0x0303ff9c,0xf36eff6c
-	.long	0x4e5e60ff,0xfffffcae,0x1d7c0000,0xff4e4280
-	.long	0x102eff63,0x02aeffff,0x00ffff64,0xf23c9000
-	.long	0x00000000,0xf23c8800,0x00000000,0x41eeff6c
-	.long	0x61ff0000,0xb2ce082e,0x0004ff62,0x6600ff70
-	.long	0x082e0001,0xff626600,0xff90f22e,0xd0c0ffdc
-	.long	0xf22e9c00,0xff604cee,0x0303ff9c,0x4e5e0817
-	.long	0x000767ff,0xfffffc0c,0xf22fa400,0x00083f7c
-	.long	0x20240006,0x60ffffff,0xfcec4e56,0xff40f32e
-	.long	0xff6c48ee,0x0303ff9c,0xf22ebc00,0xff60f22e
-	.long	0xf0c0ffdc,0x2d6eff68,0xff44206e,0xff4458ae
-	.long	0xff4461ff,0xfffffd42,0x2d40ff40,0x082e0005
-	.long	0xff426600,0x013241ee,0xff6c61ff,0x0000035a
-	.long	0x41eeff6c,0x61ff0000,0xc01a1d40,0xff4e082e
-	.long	0x0005ff43,0x672e082e,0x0004ff43,0x6626e9ee
-	.long	0x0183ff42,0x61ff0000,0xbb5841ee,0xff7861ff
-	.long	0x0000bff0,0x0c000006,0x660661ff,0x0000bf54
-	.long	0x1d40ff4f,0x4280102e,0xff63122e,0xff430241
-	.long	0x007f02ae,0x00ff01ff,0xff64f23c,0x90000000
-	.long	0x0000f23c,0x88000000,0x000041ee,0xff6c43ee
-	.long	0xff78223b,0x15300000,0x6f484ebb,0x19300000
-	.long	0x6f40e9ee,0x0183ff42,0x61ff0000,0xbb84082e
-	.long	0x0003ff62,0x6622082e,0x0001ff62,0x664ef22e
-	.long	0xd0c0ffdc,0xf22e9c00,0xff604cee,0x0303ff9c
-	.long	0x4e5e60ff,0xfffffafc,0x082e0003,0xff666700
-	.long	0xffd6f22e,0xf040ff6c,0x3d7ce003,0xff6ef22e
-	.long	0xd0c0ffdc,0xf22e9c00,0xff604cee,0x0303ff9c
-	.long	0xf36eff6c,0x4e5e60ff,0xfffffaf4,0x082e0001
-	.long	0xff666700,0xffaaf22e,0xf040ff6c,0x1d7c00c4
-	.long	0x000b3d7c,0xe001ff6e,0xf22ed0c0,0xffdcf22e
-	.long	0x9c00ff60,0x4cee0303,0xff9cf36e,0xff6c4e5e
-	.long	0x60ffffff,0xfad01d7c,0x0000ff4e,0x4280102e
-	.long	0xff6302ae,0xffff00ff,0xff64f23c,0x90000000
-	.long	0x0000f23c,0x88000000,0x000041ee,0xff6c61ff
-	.long	0x0000b0f0,0x082e0003,0xff626600,0xff66082e
-	.long	0x0001ff62,0x6600ff90,0xf22ed0c0,0xffdcf22e
-	.long	0x9c00ff60,0x4cee0303,0xff9c4e5e,0x08170007
-	.long	0x67ffffff,0xfa2ef22f,0xa4000008,0x3f7c2024
-	.long	0x000660ff,0xfffffb0e,0x4e56ff40,0xf32eff6c
-	.long	0x48ee0303,0xff9cf22e,0xbc00ff60,0xf22ef0c0
-	.long	0xffdc082e,0x00050004,0x66084e68,0x2d48ffd8
-	.long	0x600841ee,0x00102d48,0xffd82d6e,0xff68ff44
-	.long	0x206eff44,0x58aeff44,0x61ffffff,0xfb4c2d40
-	.long	0xff40422e,0xff4a082e,0x0005ff42,0x66000208
-	.long	0xe9ee0006,0xff420c00,0x00136700,0x049e02ae
-	.long	0x00ff00ff,0xff64f23c,0x90000000,0x0000f23c
-	.long	0x88000000,0x000041ee,0xff6c61ff,0x0000013a
-	.long	0x41eeff6c,0x61ff0000,0xbdfa0c00,0x00066606
-	.long	0x61ff0000,0xbd5e1d40,0xff4ee9ee,0x0183ff42
-	.long	0x082e0005,0xff436728,0x0c2e003a,0xff436720
-	.long	0x61ff0000,0xb92c41ee,0xff7861ff,0x0000bdc4
-	.long	0x0c000006,0x660661ff,0x0000bd28,0x1d40ff4f
-	.long	0x4280102e,0xff63e9ee,0x1047ff43,0x41eeff6c
-	.long	0x43eeff78,0x223b1d30,0x00006d36,0x4ebb1930
-	.long	0x00006d2e,0x102eff62,0x6634102e,0xff430200
-	.long	0x00380c00,0x0038670c,0xe9ee0183,0xff4261ff
-	.long	0x0000b95e,0xf22ed0c0,0xffdcf22e,0x9c00ff60
-	.long	0x4cee0303,0xff9c4e5e,0x60ffffff,0xf8e6c02e
-	.long	0xff66edc0,0x06086614,0x082e0004,0xff6667ba
-	.long	0x082e0001,0xff6267b2,0x60000066,0x04800000
-	.long	0x00180c00,0x00066614,0x082e0003,0xff666600
-	.long	0x004a082e,0x0004ff66,0x66000046,0x2f0061ff
-	.long	0x000007e0,0x201f3d7b,0x0222ff6e,0xf22ed0c0
-	.long	0xffdcf22e,0x9c00ff60,0x4cee0303,0xff9cf36e
-	.long	0xff6c4e5e,0x60ffffff,0xf87ae000,0xe006e004
-	.long	0xe005e003,0xe002e001,0xe001303c,0x000460bc
-	.long	0x303c0003,0x60b6e9ee,0x0006ff42,0x0c000011
-	.long	0x67080c00,0x00156750,0x4e753028,0x00000240
-	.long	0x7fff0c40,0x3f806708,0x0c40407f,0x672c4e75
-	.long	0x02a87fff,0xffff0004,0x671861ff,0x0000bbbc
-	.long	0x44400640,0x3f810268,0x80000000,0x81680000
-	.long	0x4e750268,0x80000000,0x4e750228,0x007f0004
-	.long	0x00687fff,0x00004e75,0x30280000,0x02407fff
-	.long	0x0c403c00,0x67080c40,0x43ff67de,0x4e7502a8
-	.long	0x7fffffff,0x00046606,0x4aa80008,0x67c461ff
-	.long	0x0000bb68,0x44400640,0x3c010268,0x80000000
-	.long	0x81680000,0x4e75e9ee,0x00c3ff42,0x0c000003
-	.long	0x670004a2,0x0c000007,0x6700049a,0x02aeffff
-	.long	0x00ffff64,0xf23c9000,0x00000000,0xf23c8800
-	.long	0x00000000,0x302eff6c,0x02407fff,0x671041ee
-	.long	0xff6c61ff,0x0000bb5c,0x1d40ff4e,0x60061d7c
-	.long	0x0004ff4e,0x4280102e,0xff6341ee,0xff6c2d56
-	.long	0xffd461ff,0x0000adec,0x102eff62,0x66000086
-	.long	0x2caeffd4,0x082e0005,0x00046626,0x206effd8
-	.long	0x4e60f22e,0xd0c0ffdc,0xf22e9c00,0xff604cee
-	.long	0x0303ff9c,0x4e5e0817,0x0007667a,0x60ffffff
-	.long	0xf7220c2e,0x0008ff4a,0x66d8f22e,0xf080ff6c
-	.long	0xf22ed0c0,0xffdcf22e,0x9c00ff60,0x4cee0303
-	.long	0xff9c2c56,0x2f6f00c4,0x00b82f6f,0x00c800bc
-	.long	0x2f6f002c,0x00c42f6f,0x003000c8,0x2f6f0034
-	.long	0x00ccdffc,0x000000b8,0x08170007,0x662860ff
-	.long	0xfffff6d0,0xc02eff66,0xedc00608,0x662a082e
-	.long	0x0004ff66,0x6700ff6a,0x082e0001,0xff626700
-	.long	0xff606000,0x01663f7c,0x20240006,0xf22fa400
-	.long	0x000860ff,0xfffff78e,0x04800000,0x0018303b
-	.long	0x020a4efb,0x00064afc,0x00080000,0x0000003a
-	.long	0x00640094,0x00000140,0x0000f22e,0xd0c0ffdc
-	.long	0xf22e9c00,0xff604cee,0x0303ff9c,0x3d7c30d8
-	.long	0x000a3d7c,0xe006ff6e,0xf36eff6c,0x4e5e60ff
-	.long	0xfffff6d4,0xf22ed0c0,0xffdcf22e,0x9c00ff60
-	.long	0x4cee0303,0xff9c3d7c,0x30d0000a,0x3d7ce004
-	.long	0xff6ef36e,0xff6c4e5e,0x60ffffff,0xf694f22e
-	.long	0xf040ff6c,0xf22ed0c0,0xffdcf22e,0x9c00ff60
-	.long	0x4cee0303,0xff9c3d7c,0x30d4000a,0x3d7ce005
-	.long	0xff6ef36e,0xff6c4e5e,0x60ffffff,0xf60c2cae
-	.long	0xffd4082e,0x00050004,0x66000038,0x206effd8
-	.long	0x4e60f22e,0xf040ff6c,0xf22ed0c0,0xffdcf22e
-	.long	0x9c00ff60,0x4cee0303,0xff9c3d7c,0x30cc000a
-	.long	0x3d7ce003,0xff6ef36e,0xff6c4e5e,0x60ffffff
-	.long	0xf5de0c2e,0x0008ff4a,0x66c8f22e,0xf080ff6c
-	.long	0xf22ef040,0xff78f22e,0xd0c0ffdc,0xf22e9c00
-	.long	0xff604cee,0x0303ff9c,0x3d7c30cc,0x000a3d7c
-	.long	0xe003ff7a,0xf36eff78,0x2c562f6f,0x00c400b8
-	.long	0x2f6f00c8,0x00bc2f6f,0x00cc00c0,0x2f6f002c
-	.long	0x00c42f6f,0x003000c8,0x2f6f0034,0x00ccdffc
-	.long	0x000000b8,0x60ffffff,0xf576f22e,0xf040ff6c
-	.long	0xf22ed0c0,0xffdcf22e,0x9c00ff60,0x4cee0303
-	.long	0xff9c3d7c,0x30c4000a,0x3d7ce001,0xff6ef36e
-	.long	0xff6c4e5e,0x60ffffff,0xf55c02ae,0x00ff00ff
-	.long	0xff64f23c,0x90000000,0x0000f23c,0x88000000
-	.long	0x000061ff,0x0000bdba,0x41eeff6c,0x61ff0000
-	.long	0xb9621d40,0xff4ee9ee,0x0183ff42,0x082e0005
-	.long	0xff436728,0x0c2e003a,0xff436720,0x61ff0000
-	.long	0xb4a041ee,0xff7861ff,0x0000b938,0x0c000006
-	.long	0x660661ff,0x0000b89c,0x1d40ff4f,0x4280102e
-	.long	0xff63e9ee,0x1047ff43,0x41eeff6c,0x43eeff78
-	.long	0x223b1d30,0x000068aa,0x4ebb1930,0x000068a2
-	.long	0x102eff62,0x6600008a,0x102eff43,0x02000038
-	.long	0x0c000038,0x670ce9ee,0x0183ff42,0x61ff0000
-	.long	0xb4d0082e,0x00050004,0x6600002a,0x206effd8
-	.long	0x4e60f22e,0xd0c0ffdc,0xf22e9c00,0xff604cee
-	.long	0x0303ff9c,0x4e5e0817,0x00076600,0x012660ff
-	.long	0xfffff440,0x082e0002,0xff4a67d6,0xf22ed0c0
-	.long	0xffdcf22e,0x9c00ff60,0x4cee0303,0xff9c4e5e
-	.long	0x2f6f0004,0x00102f6f,0x0000000c,0xdffc0000
-	.long	0x000c0817,0x00076600,0x00ea60ff,0xfffff404
-	.long	0xc02eff66,0xedc00608,0x6618082e,0x0004ff66
-	.long	0x6700ff66,0x082e0001,0xff626700,0xff5c6000
-	.long	0x006e0480,0x00000018,0x0c000006,0x6d14082e
-	.long	0x0003ff66,0x66000060,0x082e0004,0xff666600
-	.long	0x004e082e,0x00050004,0x66000054,0x206effd8
-	.long	0x4e603d7b,0x022aff6e,0xf22ed0c0,0xffdcf22e
-	.long	0x9c00ff60,0x4cee0303,0xff9cf36e,0xff6c4e5e
-	.long	0x08170007,0x6600006c,0x60ffffff,0xf386e000
-	.long	0xe006e004,0xe005e003,0xe002e001,0xe001303c
-	.long	0x00036000,0xffae303c,0x00046000,0xffa6082e
-	.long	0x0002ff4a,0x67ac3d7b,0x02d6ff6e,0xf22ed0c0
-	.long	0xffdcf22e,0x9c00ff60,0x4cee0303,0xff9cf36e
-	.long	0xff6c4e5e,0x2f6f0004,0x00102f6f,0x0000000c
-	.long	0xdffc0000,0x000c0817,0x00076606,0x60ffffff
-	.long	0xf3223f7c,0x20240006,0xf22fa400,0x000860ff
-	.long	0xfffff402,0x02aeffff,0x00ffff64,0xf23c9000
-	.long	0x00000000,0xf23c8800,0x00000000,0xe9ee0183
-	.long	0xff4261ff,0x0000b22a,0x41eeff6c,0x61ff0000
-	.long	0xb7520c00,0x00066606,0x61ff0000,0xb6b61d40
-	.long	0xff4e4280,0x102eff63,0x41eeff6c,0x2d56ffd4
-	.long	0x61ff0000,0xa94e102e,0xff626600,0x00842cae
-	.long	0xffd4082e,0x00050004,0x6628206e,0xffd84e60
-	.long	0xf22ed0c0,0xffdcf22e,0x9c00ff60,0x4cee0303
-	.long	0xff9c4e5e,0x08170007,0x6600ff68,0x60ffffff
-	.long	0xf282082e,0x0003ff4a,0x67d6f22e,0xd0c0ffdc
-	.long	0xf22e9c00,0xff604cee,0x0303ff9c,0x2c562f6f
-	.long	0x00c400b8,0x2f6f00c8,0x00bc2f6f,0x003800c4
-	.long	0x2f6f003c,0x00c82f6f,0x004000cc,0xdffc0000
-	.long	0x00b80817,0x00076600,0xff1a60ff,0xfffff234
-	.long	0xc02eff66,0xedc00608,0x6700ff74,0x2caeffd4
-	.long	0x0c00001a,0x6e0000e8,0x67000072,0x082e0005
-	.long	0x0004660a,0x206effd8,0x4e606000,0xfb8e0c2e
-	.long	0x0008ff4a,0x6600fb84,0xf22ed0c0,0xffdcf22e
-	.long	0x9c00ff60,0x4cee0303,0xff9c3d7c,0x30d8000a
-	.long	0x3d7ce006,0xff6ef36e,0xff6c2c56,0x2f6f00c4
-	.long	0x00b82f6f,0x00c800bc,0x2f6f00cc,0x00c02f6f
-	.long	0x003800c4,0x2f6f003c,0x00c82f6f,0x004000cc
-	.long	0xdffc0000,0x00b860ff,0xfffff22c,0x082e0005
-	.long	0x00046600,0x000c206e,0xffd84e60,0x6000fb46
-	.long	0x0c2e0008,0xff4a6600,0xfb3cf22e,0xd0c0ffdc
-	.long	0xf22e9c00,0xff604cee,0x0303ff9c,0x3d7c30d0
-	.long	0x000a3d7c,0xe004ff6e,0xf36eff6c,0x2c562f6f
-	.long	0x00c400b8,0x2f6f00c8,0x00bc2f6f,0x00cc00c0
-	.long	0x2f6f0038,0x00c42f6f,0x003c00c8,0x2f6f0040
-	.long	0x00ccdffc,0x000000b8,0x60ffffff,0xf1a4082e
-	.long	0x00050004,0x6600000c,0x206effd8,0x4e606000
-	.long	0xfbda0c2e,0x0008ff4a,0x6600fbd0,0xf22ed0c0
-	.long	0xffdcf22e,0x9c00ff60,0x4cee0303,0xff9c3d7c
-	.long	0x30c4000a,0x3d7ce001,0xff6ef36e,0xff6c2c56
-	.long	0x2f6f00c4,0x00b82f6f,0x00c800bc,0x2f6f00cc
-	.long	0x00c02f6f,0x003800c4,0x2f6f003c,0x00c82f6f
-	.long	0x004000cc,0xdffc0000,0x00b860ff,0xfffff106
-	.long	0xe9ee00c3,0xff420c00,0x00016708,0x0c000005
-	.long	0x67344e75,0x302eff6c,0x02407fff,0x67260c40
-	.long	0x3f806e20,0x44400640,0x3f81222e,0xff70e0a9
-	.long	0x08c1001f,0x2d41ff70,0x026e8000,0xff6c006e
-	.long	0x3f80ff6c,0x4e75302e,0xff6c0240,0x7fff673a
-	.long	0x0c403c00,0x6e344a2e,0xff6c5bee,0xff6e3d40
-	.long	0xff6c4280,0x41eeff6c,0x323c3c01,0x61ff0000
-	.long	0xb156303c,0x3c004a2e,0xff6e6704,0x08c0000f
-	.long	0x08ee0007,0xff703d40,0xff6c4e75,0x082e0005
-	.long	0x000467ff,0xfffff176,0x2d680000,0xff782d68
-	.long	0x0004ff7c,0x2d680008,0xff804281,0x4e752f00
-	.long	0x4e7a0808,0x08000001,0x66000460,0x201f4e56
-	.long	0xff4048ee,0x0303ff9c,0xf22ebc00,0xff60f22e
-	.long	0xf0c0ffdc,0x2d6e0006,0xff44206e,0xff4458ae
-	.long	0xff4461ff,0xfffff152,0x2d40ff40,0x4a406b00
-	.long	0x020e02ae,0x00ff00ff,0xff640800,0x000a6618
-	.long	0x206eff44,0x43eeff6c,0x700c61ff,0xfffff0d2
-	.long	0x4a816600,0x04926048,0x206eff44,0x43eeff6c
-	.long	0x700c61ff,0xfffff0ba,0x4a816600,0x047ae9ee
-	.long	0x004fff6c,0x0c407fff,0x6726102e,0xff6f0200
-	.long	0x000f660c,0x4aaeff70,0x66064aae,0xff746710
-	.long	0x41eeff6c,0x61ff0000,0xb88cf22e,0xf080ff6c
-	.long	0x06ae0000,0x000cff44,0x41eeff6c,0x61ff0000
-	.long	0xb3c21d40,0xff4e0c00,0x0006660a,0x61ff0000
-	.long	0xb3221d40,0xff4e422e,0xff53082e,0x0005ff43
-	.long	0x6748082e,0x0004ff43,0x662ce9ee,0x0183ff42
-	.long	0x61ff0000,0xaeec41ee,0xff7861ff,0x0000b384
-	.long	0x1d40ff4f,0x0c000006,0x662061ff,0x0000b2e4
-	.long	0x1d40ff4f,0x6014082e,0x0003ff43,0x670c50ee
-	.long	0xff53082e,0x0001ff43,0x67c04280,0x102eff63
-	.long	0x122eff43,0x0241007f,0xf23c9000,0x00000000
-	.long	0xf23c8800,0x00000000,0x41eeff6c,0x43eeff78
-	.long	0x223b1530,0x000062ca,0x4ebb1930,0x000062c2
-	.long	0x102eff62,0x66404a2e,0xff53660c,0xe9ee0183
-	.long	0xff4261ff,0x0000aefa,0x2d6e0006,0xff682d6e
-	.long	0xff440006,0xf22ed0c0,0xffdcf22e,0x9c00ff60
-	.long	0x4cee0303,0xff9c4e5e,0x08170007,0x66000096
-	.long	0x60ffffff,0xee6ec02e,0xff66edc0,0x06086612
-	.long	0x082e0004,0xff6667ae,0x082e0001,0xff6267ac
-	.long	0x60340480,0x00000018,0x0c000006,0x6610082e
-	.long	0x0004ff66,0x6620082e,0x0003ff66,0x66203d7b
-	.long	0x0206ff6e,0x601ee002,0xe006e004,0xe005e003
-	.long	0xe002e001,0xe0013d7c,0xe005ff6e,0x60063d7c
-	.long	0xe003ff6e,0x2d6e0006,0xff682d6e,0xff440006
-	.long	0xf22ed0c0,0xffdcf22e,0x9c00ff60,0x4cee0303
-	.long	0xff9cf36e,0xff6c4e5e,0x08170007,0x660660ff
-	.long	0xffffede0,0x2f173f6f,0x00080004,0x3f7c2024
-	.long	0x0006f22f,0xa4000008,0x60ffffff,0xeeb80800
-	.long	0x000e6700,0x01c2082e,0x00050004,0x66164e68
-	.long	0x2d48ffd8,0x61ff0000,0x9564206e,0xffd84e60
-	.long	0x600001aa,0x422eff4a,0x41ee000c,0x2d48ffd8
-	.long	0x61ff0000,0x95480c2e,0x0008ff4a,0x67000086
-	.long	0x0c2e0004,0xff4a6600,0x0184082e,0x00070004
-	.long	0x66363dae,0x00040804,0x2daeff44,0x08063dbc
-	.long	0x00f0080a,0x41f60804,0x2d480004,0xf22ed0c0
-	.long	0xffdcf22e,0x9c00ff60,0x4cee0303,0xff9c4e5e
-	.long	0x2e5f60ff,0xffffed3c,0x3dae0004,0x08002dae
-	.long	0xff440802,0x3dbc2024,0x08062dae,0x00060808
-	.long	0x41f60800,0x2d480004,0xf22ed0c0,0xffdcf22e
-	.long	0x9c00ff60,0x4cee0303,0xff9c4e5e,0x2e5f60ff
-	.long	0xffffedf2,0x1d41000a,0x1d40000b,0xf22ed0c0
-	.long	0xffdcf22e,0x9c00ff60,0x4cee0303,0xff9c2f16
-	.long	0x2f002f01,0x2f2eff44,0x4280102e,0x000b4480
-	.long	0x082e0007,0x0004671c,0x3dae0004,0x08002dae
-	.long	0x00060808,0x2d9f0802,0x3dbc2024,0x08064876
-	.long	0x08006014,0x3dae0004,0x08042d9f,0x08063dbc
-	.long	0x00f0080a,0x48760804,0x4281122e,0x000a4a01
-	.long	0x6a0cf236,0xf080080c,0x06800000,0x000ce309
-	.long	0x6a0cf236,0xf040080c,0x06800000,0x000ce309
-	.long	0x6a0cf236,0xf020080c,0x06800000,0x000ce309
-	.long	0x6a0cf236,0xf010080c,0x06800000,0x000ce309
-	.long	0x6a0cf236,0xf008080c,0x06800000,0x000ce309
-	.long	0x6a0cf236,0xf004080c,0x06800000,0x000ce309
-	.long	0x6a0cf236,0xf002080c,0x06800000,0x000ce309
-	.long	0x6a06f236,0xf001080c,0x222f0004,0x202f0008
-	.long	0x2c6f000c,0x2e5f0817,0x000767ff,0xffffec04
-	.long	0x60ffffff,0xecf061ff,0x00009bda,0xf22ed0c0
-	.long	0xffdcf22e,0x9c00ff60,0x4cee0303,0xff9c082e
-	.long	0x00070004,0x660e2d6e,0xff440006,0x4e5e60ff
-	.long	0xffffebd0,0x2c563f6f,0x00c400c0,0x2f6f00c6
-	.long	0x00c82f6f,0x000400c2,0x3f7c2024,0x00c6dffc
-	.long	0x000000c0,0x60ffffff,0xec9c201f,0x4e56ff40
-	.long	0x48ee0303,0xff9c2d6e,0x0006ff44,0x206eff44
-	.long	0x58aeff44,0x61ffffff,0xed002d40,0xff404a40
-	.long	0x6b047010,0x60260800,0x000e6610,0xe9c014c3
-	.long	0x700c0c01,0x00076614,0x58806010,0x428061ff
-	.long	0x0000967c,0x202eff44,0x90ae0006,0x3d40000a
-	.long	0x4cee0303,0xff9c4e5e,0x518f2f00,0x3f6f000c
-	.long	0x00042f6f,0x000e0006,0x4280302f,0x00122f6f
-	.long	0x00060010,0xd1af0006,0x3f7c402c,0x000a201f
-	.long	0x60ffffff,0xebe44e7a,0x08080800,0x0001660c
-	.long	0xf22e9c00,0xff60f22e,0xd0c0ffdc,0x4cee0303
-	.long	0xff9c4e5e,0x514f2eaf,0x00083f6f,0x000c0004
-	.long	0x3f7c4008,0x00062f6f,0x00020008,0x2f7c0942
-	.long	0x8001000c,0x08170005,0x670608ef,0x0002000d
-	.long	0x60ffffff,0xebd64fee,0xff404e7a,0x18080801
-	.long	0x0001660c,0xf22ed0c0,0xffdcf22f,0x9c000020
-	.long	0x2c562f6f,0x00c400bc,0x3f6f00c8,0x00c03f7c
-	.long	0x400800c2,0x2f4800c4,0x3f4000c8,0x3f7c0001
-	.long	0x00ca4cef,0x0303005c,0xdefc00bc,0x60a64e56
-	.long	0xff40f32e,0xff6c48ee,0x0303ff9c,0xf22ebc00
-	.long	0xff60f22e,0xf0c0ffdc,0x2d6eff68,0xff44206e
-	.long	0xff4458ae,0xff4461ff,0xffffebce,0x2d40ff40
-	.long	0x0800000d,0x662841ee,0xff6c61ff,0xfffff1ea
-	.long	0xf22ed0c0,0xffdcf22e,0x9c00ff60,0x4cee0303
-	.long	0xff9cf36e,0xff6c4e5e,0x60ffffff,0xea94322e
-	.long	0xff6c0241,0x7fff0c41,0x7fff661a,0x4aaeff74
-	.long	0x660c222e,0xff700281,0x7fffffff,0x67082d6e
-	.long	0xff70ff54,0x6012223c,0x7fffffff,0x4a2eff6c
-	.long	0x6a025281,0x2d41ff54,0xe9c004c3,0x122eff41
-	.long	0x307b0206,0x4efb8802,0x006c0000,0x0000ff98
-	.long	0x003e0000,0x00100000,0x102eff54,0x0c010007
-	.long	0x6f16206e,0x000c61ff,0xffffeb86,0x4a8166ff
-	.long	0x0000bca8,0x6000ff6a,0x02410007,0x61ff0000
-	.long	0xa8046000,0xff5c302e,0xff540c01,0x00076f16
-	.long	0x206e000c,0x61ffffff,0xeb6e4a81,0x66ff0000
-	.long	0xbc886000,0xff3c0241,0x000761ff,0x0000a79a
-	.long	0x6000ff2e,0x202eff54,0x0c010007,0x6f16206e
-	.long	0x000c61ff,0xffffeb56,0x4a8166ff,0x0000bc68
-	.long	0x6000ff0e,0x02410007,0x61ff0000,0xa7306000
-	.long	0xff004e56,0xff40f32e,0xff6c48ee,0x0303ff9c
-	.long	0xf22ebc00,0xff60f22e,0xf0c0ffdc,0x2d6eff68
-	.long	0xff44206e,0xff4458ae,0xff4461ff,0xffffea8a
-	.long	0x2d40ff40,0x0800000d,0x6600002a,0x41eeff6c
-	.long	0x61ffffff,0xf0a4f22e,0xd0c0ffdc,0xf22e9c00
-	.long	0xff604cee,0x0303ff9c,0xf36eff6c,0x4e5e60ff
-	.long	0xffffe964,0xe9c004c3,0x122eff41,0x307b0206
-	.long	0x4efb8802,0x007400a6,0x015a0000,0x00420104
-	.long	0x00100000,0x102eff70,0x08c00006,0x0c010007
-	.long	0x6f16206e,0x000c61ff,0xffffea76,0x4a8166ff
-	.long	0x0000bb98,0x6000ffa0,0x02410007,0x61ff0000
-	.long	0xa6f46000,0xff92302e,0xff7008c0,0x000e0c01
-	.long	0x00076f16,0x206e000c,0x61ffffff,0xea5a4a81
-	.long	0x66ff0000,0xbb746000,0xff6e0241,0x000761ff
-	.long	0x0000a686,0x6000ff60,0x202eff70,0x08c0001e
-	.long	0x0c010007,0x6f16206e,0x000c61ff,0xffffea3e
-	.long	0x4a8166ff,0x0000bb50,0x6000ff3c,0x02410007
-	.long	0x61ff0000,0xa6186000,0xff2e0c01,0x00076f2e
-	.long	0x202eff6c,0x02808000,0x00000080,0x7fc00000
-	.long	0x222eff70,0xe0898081,0x206e000c,0x61ffffff
-	.long	0xe9fc4a81,0x66ff0000,0xbb0e6000,0xfefa202e
-	.long	0xff6c0280,0x80000000,0x00807fc0,0x00002f01
-	.long	0x222eff70,0xe0898081,0x221f0241,0x000761ff
-	.long	0x0000a5ba,0x6000fed0,0x202eff6c,0x02808000
-	.long	0x00000080,0x7ff80000,0x222eff70,0x2d40ff84
-	.long	0x700be0a9,0x83aeff84,0x222eff70,0x02810000
-	.long	0x07ffe0b9,0x2d41ff88,0x222eff74,0xe0a983ae
-	.long	0xff8841ee,0xff84226e,0x000c7008,0x61ffffff
-	.long	0xe8cc4a81,0x66ff0000,0xba9c6000,0xfe7a422e
-	.long	0xff4a3d6e,0xff6cff84,0x426eff86,0x202eff70
-	.long	0x08c0001e,0x2d40ff88,0x2d6eff74,0xff8c082e
-	.long	0x00050004,0x66384e68,0x2d48ffd8,0x2d56ffd4
-	.long	0x61ff0000,0x98922248,0x2d48000c,0x206effd8
-	.long	0x4e602cae,0xffd441ee,0xff84700c,0x61ffffff
-	.long	0xe86c4a81,0x66ff0000,0xba4a6000,0xfe1a2d56
-	.long	0xffd461ff,0x00009860,0x22482d48,0x000c2cae
-	.long	0xffd40c2e,0x0008ff4a,0x66ccf22e,0xd0c0ffdc
-	.long	0xf22e9c00,0xff604cee,0x0303ff9c,0xf36eff6c
-	.long	0x2c6effd4,0x2f6f00c4,0x00b82f6f,0x00c800bc
-	.long	0x2f6f00cc,0x00c02f6f,0x004400c4,0x2f6f0048
-	.long	0x00c82f6f,0x004c00cc,0xdffc0000,0x00b860ff
-	.long	0xffffe734,0x4e56ff40,0xf32eff6c,0x48ee0303
-	.long	0xff9cf22e,0xbc00ff60,0xf22ef0c0,0xffdc2d6e
-	.long	0xff68ff44,0x206eff44,0x58aeff44,0x61ffffff
-	.long	0xe7f82d40,0xff400800,0x000d6600,0x0106e9c0
-	.long	0x04c36622,0x0c6e401e,0xff6c661a,0xf23c9000
-	.long	0x00000000,0xf22e4000,0xff70f22e,0x6800ff6c
-	.long	0x3d7ce001,0xff6e41ee,0xff6c61ff,0xffffedea
-	.long	0x02ae00ff,0x01ffff64,0xf23c9000,0x00000000
-	.long	0xf23c8800,0x00000000,0xe9ee1006,0xff420c01
-	.long	0x00176700,0x009641ee,0xff6c61ff,0x0000aa84
-	.long	0x1d40ff4e,0x082e0005,0xff43672e,0x082e0004
-	.long	0xff436626,0xe9ee0183,0xff4261ff,0x0000a5c2
-	.long	0x41eeff78,0x61ff0000,0xaa5a0c00,0x00066606
-	.long	0x61ff0000,0xa9be1d40,0xff4f4280,0x102eff63
-	.long	0x122eff43,0x0241007f,0x41eeff6c,0x43eeff78
-	.long	0x223b1530,0x000059ca,0x4ebb1930,0x000059c2
-	.long	0xe9ee0183,0xff4261ff,0x0000a606,0xf22ed0c0
-	.long	0xffdcf22e,0x9c00ff60,0x4cee0303,0xff9cf36e
-	.long	0xff6c4e5e,0x60ffffff,0xe5cc4280,0x102eff63
-	.long	0x122eff43,0x02810000,0x007f61ff,0x000043ce
-	.long	0x60be1d7c,0x0000ff4e,0x4280102e,0xff6302ae
-	.long	0xffff00ff,0xff6441ee,0xff6c61ff,0x00009be4
-	.long	0x60aa4e56,0xff40f32e,0xff6c48ee,0x0303ff9c
-	.long	0xf22ebc00,0xff60f22e,0xf0c0ffdc,0x2d6eff68
-	.long	0xff44206e,0xff4458ae,0xff4461ff,0xffffe69a
-	.long	0x2d40ff40,0x41eeff6c,0x61ffffff,0xecbcf22e
-	.long	0xd0c0ffdc,0xf22e9c00,0xff604cee,0x0303ff9c
-	.long	0xf36eff6c,0x4e5e60ff,0xffffe592,0x0c6f202c
-	.long	0x000667ff,0x000000aa,0x0c6f402c,0x000667ff
-	.long	0xffffe5a6,0x4e56ff40,0x48ee0303,0xff9c2d6e
-	.long	0x0006ff44,0x206eff44,0x58aeff44,0x61ffffff
-	.long	0xe638e9c0,0x100a0c41,0x03c86664,0xe9c01406
-	.long	0x0c010017,0x665a4e7a,0x08080800,0x0001672a
-	.long	0x4cee0303,0xff9c4e5e,0x518f3eaf,0x00082f6f
-	.long	0x000a0002,0x3f7c402c,0x00062f6f,0x0002000c
-	.long	0x58af0002,0x60ffffff,0xe5404cee,0x0303ff9c
-	.long	0x4e5ef22f,0x84000002,0x58af0002,0x2f172f6f
-	.long	0x00080004,0x1f7c0020,0x000660ff,0x00000012
-	.long	0x4cee0303,0xff9c4e5e,0x60ffffff,0xe4f64e56
-	.long	0xff4048ee,0x0303ff9c,0xf22ebc00,0xff60f22e
-	.long	0xf0c0ffdc,0x082e0005,0x00046608,0x4e682d48
-	.long	0xffd8600c,0x41ee0010,0x2d48ffd8,0x2d48ffd4
-	.long	0x2d6eff68,0xff44206e,0xff4458ae,0xff4461ff
-	.long	0xffffe576,0x2d40ff40,0xf23c9000,0x00000000
-	.long	0xf23c8800,0x00000000,0x422eff4a,0x08000016
-	.long	0x66000182,0x422eff53,0x02ae00ff,0x00ffff64
-	.long	0xe9c01406,0x0c010017,0x670000be,0x61ff0000
-	.long	0x95fc4280,0x102eff63,0x122eff43,0x0241003f
-	.long	0xe749822e,0xff4e43ee,0xff7841ee,0xff6c323b
-	.long	0x132002b2,0x4ebb1120,0x02ac102e,0xff626600
-	.long	0x00a2e9ee,0x0183ff42,0x61ff0000,0xa3e4f22e
-	.long	0xd0c0ffdc,0xf22e9c00,0xff604cee,0x0303ff9c
-	.long	0x0c2e0004,0xff4a672a,0x0c2e0008,0xff4a6722
-	.long	0x4e5e0817,0x000767ff,0xffffe358,0xf327f22f
-	.long	0xa4000014,0xf35f3f7c,0x20240006,0x60ffffff
-	.long	0xe434082e,0x00050004,0x660c2f08,0x206effd8
-	.long	0x4e60205f,0x60ca2f00,0x202effd8,0x90aeffd4
-	.long	0x2dae0008,0x08082dae,0x00040804,0x3d400004
-	.long	0x201f4e5e,0xded760aa,0x4280102e,0xff63122e
-	.long	0xff430281,0x0000007f,0x61ff0000,0x41506000
-	.long	0xff5ac02e,0xff66edc0,0x06086616,0x082e0004
-	.long	0xff666700,0xff4e082e,0x0001ff62,0x6700ff44
-	.long	0x603e0480,0x00000018,0x0c000006,0x6610082e
-	.long	0x0004ff66,0x662a082e,0x0003ff66,0x66302f00
-	.long	0x61ffffff,0xf1ee201f,0x3d7b0206,0xff6e602a
-	.long	0xe002e006,0xe004e005,0xe003e002,0xe001e001
-	.long	0x61ffffff,0xf1ce3d7c,0xe005ff6e,0x600c61ff
-	.long	0xfffff1c0,0x3d7ce003,0xff6ef22e,0xd0c0ffdc
-	.long	0xf22e9c00,0xff604cee,0x0303ff9c,0xf36eff6c
-	.long	0x6000feee,0xe9c01283,0x0c010001,0x67000056
-	.long	0x0c010007,0x66000078,0xe9c01343,0x0c010002
-	.long	0x6d00006c,0x61ff0000,0x82780c2e,0x0002ff4a
-	.long	0x670000d2,0x0c2e0001,0xff4a6600,0x01002d6e
-	.long	0xff68000c,0x3d7c201c,0x000af22e,0xd0c0ffdc
-	.long	0xf22e9c00,0xff604cee,0x0303ff9c,0x4e5e60ff
-	.long	0xffffe2dc,0x206eff44,0x54aeff44,0x61ffffff
-	.long	0xe3524a81,0x6600047c,0x48c061ff,0x00007e60
-	.long	0x0c2e0002,0xff4a6700,0x007c6000,0x00b061ff
-	.long	0x00008562,0x0c2e0002,0xff4a6700,0x0068082e
-	.long	0x00050004,0x660a206e,0xffd84e60,0x6000008e
-	.long	0x0c2e0008,0xff4a6600,0x0084f22e,0xd0c0ffdc
-	.long	0xf22e9c00,0xff604cee,0x0303ff9c,0x4e5e0817
-	.long	0x00076612,0x558f2eaf,0x00022f6f,0x00060004
-	.long	0x60ffffff,0xe17e558f,0x2eaf0002,0x3f6f0006
-	.long	0x00043f7c,0x20240006,0xf22fa400,0x000860ff
-	.long	0xffffe252,0x3d7c00c0,0x000e2d6e,0xff68000a
-	.long	0x3d6e0004,0x00083d7c,0xe000ff6e,0xf22ed0c0
-	.long	0xffdcf22e,0x9c00ff60,0x4cee0303,0xff9cf36e
-	.long	0xff6c4e5e,0x588f60ff,0xffffe180,0xf22ed0c0
-	.long	0xffdcf22e,0x9c00ff60,0x4cee0303,0xff9c4e5e
-	.long	0x08170007,0x660660ff,0xffffe108,0xf22fa400
-	.long	0x00081f7c,0x00240007,0x60ffffff,0xe1e84afc
-	.long	0x01c00000,0x00000000,0x00000000,0x00000000
-	.long	0x00000000,0x00000000,0x00000000,0x00000000
-	.long	0x000028a4,0x4b1e4b4c,0x4f4c2982,0x4f3c0000
-	.long	0x00000000,0x00000000,0x00000000,0x00000000
-	.long	0x00000000,0x00000000,0x00000000,0x00000000
-	.long	0x00000000,0x00000000,0x00000000,0x00000000
-	.long	0x000035c6,0x4b1e4b82,0x4f4c371a,0x4f3c0000
-	.long	0x00000000,0x00000000,0x00000000,0x00000000
-	.long	0x000024b0,0x4b1e4b8c,0x4f4c2766,0x4f3c0000
-	.long	0x00002988,0x4b1e4b94,0x4f4c2af0,0x4f3c0000
-	.long	0x00001ab8,0x4b1e4bd0,0x4f4c1cf6,0x4f3c0000
-	.long	0x00000000,0x00000000,0x00000000,0x00000000
-	.long	0x00001cfc,0x4b1e4744,0x4f4c1daa,0x4f3c0000
-	.long	0x00003720,0x4b1e4744,0x4f4c37a2,0x4f3c0000
-	.long	0x00000468,0x4b1e4744,0x4f4c064c,0x4f3c0000
-	.long	0x00000f2a,0x4b1e4744,0x4f4c108e,0x4f3c0000
-	.long	0x000022e0,0x4b9a4b7a,0x4f4c248c,0x4f3c0000
-	.long	0x00003d02,0x4b9a4b7a,0x4f4c3ddc,0x4f3c0000
-	.long	0x00003dfa,0x4b9a4b7a,0x4f4c3f2a,0x4f3c0000
-	.long	0x00000000,0x00000000,0x00000000,0x00000000
-	.long	0x00003386,0x47324b82,0x4f4c3538,0x4f3c0000
-	.long	0x000037c8,0x47324b82,0x4f4c37f8,0x4f3c0000
-	.long	0x00003818,0x47324b82,0x4f4c3872,0x4f3c0000
-	.long	0x00000000,0x00000000,0x00000000,0x00000000
-	.long	0x00000000,0x00000000,0x00000000,0x00000000
-	.long	0x000027e6,0x4b9a4b52,0x4f4c288a,0x4f3c0000
-	.long	0x00000000,0x00000000,0x00000000,0x00000000
-	.long	0x00000000,0x00000000,0x00000000,0x00000000
-	.long	0x00001db0,0x4bd64744,0x4f4c1e40,0x4f3c0000
-	.long	0x00000472,0x4b9a4744,0x4f4c0652,0x4f3c0000
-	.long	0x0000276c,0x4b1e4744,0x4f4c2788,0x4f3c0000
-	.long	0x000027a0,0x4b1e4744,0x4f4c27ce,0x4f3c0000
-	.long	0x00000000,0x00000000,0x00000000,0x00000000
-	.long	0x00004ca4,0x4cda4d12,0x4ee24ca4,0x4ef40000
-	.long	0x00000000,0x00000000,0x00000000,0x00000000
-	.long	0x00000000,0x00000000,0x00000000,0x00000000
-	.long	0x00000000,0x00000000,0x00000000,0x00000000
-	.long	0x00004dac,0x4de24e1a,0x4ee24dac,0x4ef40000
-	.long	0x00004e4e,0x4e864ebe,0x4ee24e4e,0x4ef40000
-	.long	0x00000000,0x00000000,0x00000000,0x00000000
-	.long	0x00000000,0x00000000,0x00000000,0x00000000
-	.long	0x00000000,0x00000000,0x00000000,0x00000000
-	.long	0x00000000,0x00000000,0x00000000,0x00000000
-	.long	0x00000000,0x00000000,0x00000000,0x00000000
-	.long	0x00000000,0x00000000,0x00000000,0x00000000
-	.long	0x00000000,0x00000000,0x00000000,0x00000000
-	.long	0x00000000,0x00000000,0x00000000,0x00000000
-	.long	0x00000000,0x00000000,0x00000000,0x00000000
-	.long	0x00000660,0x4bf24c20,0x4c3008f6,0x4c400000
-	.long	0x00000660,0x4bf24c20,0x4c3008f6,0x4c400000
-	.long	0x00000660,0x4bf24c20,0x4c3008f6,0x4c400000
-	.long	0x00000660,0x4bf24c20,0x4c3008f6,0x4c400000
-	.long	0x00000660,0x4bf24c20,0x4c3008f6,0x4c400000
-	.long	0x00000660,0x4bf24c20,0x4c3008f6,0x4c400000
-	.long	0x00000660,0x4bf24c20,0x4c3008f6,0x4c400000
-	.long	0x00000660,0x4bf24c20,0x4c3008f6,0x4c400000
-	.long	0x00004cee,0x0303ff9c,0xf22e9c00,0xff60f22e
-	.long	0xd0c0ffdc,0x2d6eff68,0x00064e5e,0x2f173f6f
-	.long	0x00080004,0x3f7c4008,0x00062f6f,0x00020008
-	.long	0x2f7c0942,0x8001000c,0x08170005,0x670608ef
-	.long	0x0002000d,0x60ffffff,0xde32bd6a,0xaa77ccc9
-	.long	0x94f53de6,0x12097aae,0x8da1be5a,0xe6452a11
-	.long	0x8ae43ec7,0x1de3a534,0x1531bf2a,0x01a01a01
-	.long	0x8b590000,0x00000000,0x00003ff8,0x00008888
-	.long	0x88888888,0x59af0000,0x0000bffc,0x0000aaaa
-	.long	0xaaaaaaaa,0xaa990000,0x00003d2a,0xc4d0d601
-	.long	0x1ee3bda9,0x396f9f45,0xac193e21,0xeed90612
-	.long	0xc972be92,0x7e4fb79d,0x9fcf3efa,0x01a01a01
-	.long	0xd4230000,0x00000000,0x0000bff5,0x0000b60b
-	.long	0x60b60b61,0xd4380000,0x00003ffa,0x0000aaaa
-	.long	0xaaaaaaaa,0xab5ebf00,0x00002d7c,0x00000000
-	.long	0xff5c6008,0x2d7c0000,0x0001ff5c,0xf2104800
-	.long	0xf22e6800,0xff842210,0x32280004,0x02817fff
-	.long	0xffff0c81,0x3fd78000,0x6c046000,0x01780c81
-	.long	0x4004bc7e,0x6d046000,0x0468f200,0x0080f23a
-	.long	0x54a3de7e,0x43fb0170,0x00000866,0xf22e6080
-	.long	0xff58222e,0xff58e981,0xd3c1f219,0x4828f211
-	.long	0x4428222e,0xff58d2ae,0xff5ce299,0x0c810000
-	.long	0x00006d00,0x0088f227,0xe00cf22e,0x6800ff84
-	.long	0xf2000023,0xf23a5580,0xfed2f23a,0x5500fed4
-	.long	0xf2000080,0xf20004a3,0xe2990281,0x80000000
-	.long	0xb3aeff84,0xf20005a3,0xf2000523,0xf23a55a2
-	.long	0xfebaf23a,0x5522febc,0xf20005a3,0xf2000523
-	.long	0xf23a55a2,0xfeb6f23a,0x4922fec0,0xf2000ca3
-	.long	0xf2000123,0xf23a48a2,0xfec2f22e,0x4823ff84
-	.long	0xf20008a2,0xf2000423,0xf21fd030,0xf2009000
-	.long	0xf22e4822,0xff8460ff,0x00004364,0xf227e00c
-	.long	0xf2000023,0xf23a5500,0xfea2f23a,0x5580fea4
-	.long	0xf2000080,0xf20004a3,0xf22e6800,0xff84e299
-	.long	0x02818000,0x0000f200,0x0523b3ae,0xff840281
-	.long	0x80000000,0xf20005a3,0x00813f80,0x00002d41
-	.long	0xff54f23a,0x5522fe74,0xf23a55a2,0xfe76f200
-	.long	0x0523f200,0x05a3f23a,0x5522fe70,0xf23a49a2
-	.long	0xfe7af200,0x0523f200,0x0ca3f23a,0x4922fe7c
-	.long	0xf23a44a2,0xfe82f200,0x0823f200,0x0422f22e
-	.long	0x4823ff84,0xf21fd030,0xf2009000,0xf22e4422
-	.long	0xff5460ff,0x000042c8,0x0c813fff,0x80006eff
-	.long	0x00000300,0x222eff5c,0x0c810000,0x00006e14
-	.long	0xf2009000,0x123c0003,0xf22e4800,0xff8460ff
-	.long	0x0000428e,0xf23c4400,0x3f800000,0xf2009000
-	.long	0xf23c4422,0x80800000,0x60ff0000,0x428a60ff
-	.long	0x00004110,0xf23c4400,0x3f800000,0x60ff0000
-	.long	0x42762d7c,0x00000004,0xff5cf210,0x4800f22e
-	.long	0x6800ff84,0x22103228,0x00040281,0x7fffffff
-	.long	0x0c813fd7,0x80006c04,0x60000240,0x0c814004
-	.long	0xbc7e6d04,0x6000027a,0xf2000080,0xf23a54a3
-	.long	0xdc9043fb,0x01700000,0x0678f22e,0x6080ff58
-	.long	0x222eff58,0xe981d3c1,0xf2194828,0xf2114428
-	.long	0x222eff58,0xe2990c81,0x00000000,0x6c000106
-	.long	0xf227e004,0xf22e6800,0xff84f200,0x0023f23a
-	.long	0x5480fce8,0xf23a5500,0xfd32f200,0x00a3f200
-	.long	0x01232f02,0x2401e29a,0x02828000,0x0000b382
-	.long	0x02828000,0x0000f23a,0x54a2fcc8,0xf23a5522
-	.long	0xfd12f200,0x00a3b5ae,0xff84241f,0xf2000123
-	.long	0xe2990281,0x80000000,0x2d7c3f80,0x0000ff54
-	.long	0xb3aeff54,0xf23a54a2,0xfca2f23a,0x5522fcec
-	.long	0xf20000a3,0xf2000123,0xf22e6800,0xff90f23a
-	.long	0x54a2fc90,0xb3aeff90,0xf23a5522,0xfcd6f200
-	.long	0x00a3f200,0x0123f23a,0x54a2fc80,0xf23a5522
-	.long	0xfccaf200,0x00a3f200,0x0123f23a,0x48a2fc7c
-	.long	0xf23a4922,0xfcc6f200,0x00a3f200,0x0123f23a
-	.long	0x48a2fc78,0xf23a4922,0xfcc2f200,0x00a3f200
-	.long	0x0823f22e,0x48a3ff84,0xf23a4422,0xfcbaf22e
-	.long	0x4823ff90,0xf21fd020,0xf2009000,0xf22e48a2
-	.long	0xff8461ff,0x0000448e,0xf22e4422,0xff5460ff
-	.long	0x000040fc,0xf227e004,0xf22e6800,0xff84f200
-	.long	0x0023f23a,0x5480fc34,0xf23a5500,0xfbdef200
-	.long	0x00a3f22e,0x6800ff90,0xf2000123,0xe2990281
-	.long	0x80000000,0xf23a54a2,0xfc1af23a,0x5522fbc4
-	.long	0xb3aeff84,0xb3aeff90,0xf20000a3,0x00813f80
-	.long	0x00002d41,0xff54f200,0x0123f23a,0x54a2fbfc
-	.long	0xf23a5522,0xfba6f200,0x00a3f200,0x0123f23a
-	.long	0x54a2fbf0,0xf23a5522,0xfb9af200,0x00a3f200
-	.long	0x0123f23a,0x54a2fbe4,0xf23a5522,0xfb8ef200
-	.long	0x00a3f200,0x0123f23a,0x48a2fbe0,0xf23a4922
-	.long	0xfb8af200,0x00a3f200,0x0123f23a,0x48a2fbdc
-	.long	0xf23a4922,0xfb86f200,0x00a3f200,0x0823f23a
-	.long	0x44a2fbd4,0xf22e4823,0xff84f22e,0x48a3ff90
-	.long	0xf21fd020,0xf2009000,0xf22e44a2,0xff5461ff
-	.long	0x000043a2,0xf22e4822,0xff8460ff,0x00004010
-	.long	0x0c813fff,0x80006e00,0x0048f23c,0x44803f80
-	.long	0x0000f200,0x9000f23c,0x44a80080,0x000061ff
-	.long	0x00004372,0xf200b000,0x123c0003,0xf22e4800
-	.long	0xff8460ff,0x00003fca,0x2f00f23c,0x44803f80
-	.long	0x000061ff,0x0000434e,0x201f60ff,0x00003e54
-	.long	0xf227e03c,0x2f02f23c,0x44800000,0x00000c81
-	.long	0x7ffeffff,0x66523d7c,0x7ffeff84,0x2d7cc90f
-	.long	0xdaa2ff88,0x42aeff8c,0x3d7c7fdc,0xff902d7c
-	.long	0x85a308d3,0xff9442ae,0xff98f200,0x003af294
-	.long	0x000e002e,0x0080ff84,0x002e0080,0xff90f22e
-	.long	0x4822ff84,0xf2000080,0xf22e4822,0xff90f200
-	.long	0x00a8f22e,0x48a2ff90,0xf22e6800,0xff84322e
-	.long	0xff842241,0x02810000,0x7fff0481,0x00003fff
-	.long	0x0c810000,0x001c6f0e,0x04810000,0x001b1d7c
-	.long	0x0000ff58,0x60084281,0x1d7c0001,0xff58243c
-	.long	0x00003ffe,0x94812d7c,0xa2f9836e,0xff882d7c
-	.long	0x4e44152a,0xff8c3d42,0xff84f200,0x0100f22e
-	.long	0x4923ff84,0x24094842,0x02828000,0x00000082
-	.long	0x5f000000,0x2d42ff54,0xf22e4522,0xff54f22e
-	.long	0x4528ff54,0x24010682,0x00003fff,0x3d42ff84
-	.long	0x2d7cc90f,0xdaa2ff88,0x42aeff8c,0x06810000
-	.long	0x3fdd3d41,0xff902d7c,0x85a308d3,0xff9442ae
-	.long	0xff98122e,0xff58f200,0x0a00f22e,0x4a23ff84
-	.long	0xf2000a80,0xf22e4aa3,0xff90f200,0x1180f200
-	.long	0x15a2f200,0x0e28f200,0x0c28f200,0x1622f200
-	.long	0x0180f200,0x10a8f200,0x04220c01,0x00006e00
-	.long	0x000ef200,0x01a8f200,0x0ca26000,0xff0cf22e
-	.long	0x6100ff58,0x241ff21f,0xd03c222e,0xff5c0c81
-	.long	0x00000004,0x6d00fa4c,0x6000fc36,0x3ea0b759
-	.long	0xf50f8688,0xbef2baa5,0xa8924f04,0xbf346f59
-	.long	0xb39ba65f,0x00000000,0x00000000,0x3ff60000
-	.long	0xe073d3fc,0x199c4a00,0x00000000,0x3ff90000
-	.long	0xd23cd684,0x15d95fa1,0x00000000,0xbffc0000
-	.long	0x8895a6c5,0xfb423bca,0x00000000,0xbffd0000
-	.long	0xeef57e0d,0xa84bc8ce,0x00000000,0x3ffc0000
-	.long	0xa2f9836e,0x4e44152a,0x00000000,0x40010000
-	.long	0xc90fdaa2,0x00000000,0x00000000,0x3fdf0000
-	.long	0x85a308d4,0x00000000,0x00000000,0xc0040000
-	.long	0xc90fdaa2,0x2168c235,0x21800000,0xc0040000
-	.long	0xc2c75bcd,0x105d7c23,0xa0d00000,0xc0040000
-	.long	0xbc7edcf7,0xff523611,0xa1e80000,0xc0040000
-	.long	0xb6365e22,0xee46f000,0x21480000,0xc0040000
-	.long	0xafeddf4d,0xdd3ba9ee,0xa1200000,0xc0040000
-	.long	0xa9a56078,0xcc3063dd,0x21fc0000,0xc0040000
-	.long	0xa35ce1a3,0xbb251dcb,0x21100000,0xc0040000
-	.long	0x9d1462ce,0xaa19d7b9,0xa1580000,0xc0040000
-	.long	0x96cbe3f9,0x990e91a8,0x21e00000,0xc0040000
-	.long	0x90836524,0x88034b96,0x20b00000,0xc0040000
-	.long	0x8a3ae64f,0x76f80584,0xa1880000,0xc0040000
-	.long	0x83f2677a,0x65ecbf73,0x21c40000,0xc0030000
-	.long	0xfb53d14a,0xa9c2f2c2,0x20000000,0xc0030000
-	.long	0xeec2d3a0,0x87ac669f,0x21380000,0xc0030000
-	.long	0xe231d5f6,0x6595da7b,0xa1300000,0xc0030000
-	.long	0xd5a0d84c,0x437f4e58,0x9fc00000,0xc0030000
-	.long	0xc90fdaa2,0x2168c235,0x21000000,0xc0030000
-	.long	0xbc7edcf7,0xff523611,0xa1680000,0xc0030000
-	.long	0xafeddf4d,0xdd3ba9ee,0xa0a00000,0xc0030000
-	.long	0xa35ce1a3,0xbb251dcb,0x20900000,0xc0030000
-	.long	0x96cbe3f9,0x990e91a8,0x21600000,0xc0030000
-	.long	0x8a3ae64f,0x76f80584,0xa1080000,0xc0020000
-	.long	0xfb53d14a,0xa9c2f2c2,0x1f800000,0xc0020000
-	.long	0xe231d5f6,0x6595da7b,0xa0b00000,0xc0020000
-	.long	0xc90fdaa2,0x2168c235,0x20800000,0xc0020000
-	.long	0xafeddf4d,0xdd3ba9ee,0xa0200000,0xc0020000
-	.long	0x96cbe3f9,0x990e91a8,0x20e00000,0xc0010000
-	.long	0xfb53d14a,0xa9c2f2c2,0x1f000000,0xc0010000
-	.long	0xc90fdaa2,0x2168c235,0x20000000,0xc0010000
-	.long	0x96cbe3f9,0x990e91a8,0x20600000,0xc0000000
-	.long	0xc90fdaa2,0x2168c235,0x1f800000,0xbfff0000
-	.long	0xc90fdaa2,0x2168c235,0x1f000000,0x00000000
-	.long	0x00000000,0x00000000,0x00000000,0x3fff0000
-	.long	0xc90fdaa2,0x2168c235,0x9f000000,0x40000000
-	.long	0xc90fdaa2,0x2168c235,0x9f800000,0x40010000
-	.long	0x96cbe3f9,0x990e91a8,0xa0600000,0x40010000
-	.long	0xc90fdaa2,0x2168c235,0xa0000000,0x40010000
-	.long	0xfb53d14a,0xa9c2f2c2,0x9f000000,0x40020000
-	.long	0x96cbe3f9,0x990e91a8,0xa0e00000,0x40020000
-	.long	0xafeddf4d,0xdd3ba9ee,0x20200000,0x40020000
-	.long	0xc90fdaa2,0x2168c235,0xa0800000,0x40020000
-	.long	0xe231d5f6,0x6595da7b,0x20b00000,0x40020000
-	.long	0xfb53d14a,0xa9c2f2c2,0x9f800000,0x40030000
-	.long	0x8a3ae64f,0x76f80584,0x21080000,0x40030000
-	.long	0x96cbe3f9,0x990e91a8,0xa1600000,0x40030000
-	.long	0xa35ce1a3,0xbb251dcb,0xa0900000,0x40030000
-	.long	0xafeddf4d,0xdd3ba9ee,0x20a00000,0x40030000
-	.long	0xbc7edcf7,0xff523611,0x21680000,0x40030000
-	.long	0xc90fdaa2,0x2168c235,0xa1000000,0x40030000
-	.long	0xd5a0d84c,0x437f4e58,0x1fc00000,0x40030000
-	.long	0xe231d5f6,0x6595da7b,0x21300000,0x40030000
-	.long	0xeec2d3a0,0x87ac669f,0xa1380000,0x40030000
-	.long	0xfb53d14a,0xa9c2f2c2,0xa0000000,0x40040000
-	.long	0x83f2677a,0x65ecbf73,0xa1c40000,0x40040000
-	.long	0x8a3ae64f,0x76f80584,0x21880000,0x40040000
-	.long	0x90836524,0x88034b96,0xa0b00000,0x40040000
-	.long	0x96cbe3f9,0x990e91a8,0xa1e00000,0x40040000
-	.long	0x9d1462ce,0xaa19d7b9,0x21580000,0x40040000
-	.long	0xa35ce1a3,0xbb251dcb,0xa1100000,0x40040000
-	.long	0xa9a56078,0xcc3063dd,0xa1fc0000,0x40040000
-	.long	0xafeddf4d,0xdd3ba9ee,0x21200000,0x40040000
-	.long	0xb6365e22,0xee46f000,0xa1480000,0x40040000
-	.long	0xbc7edcf7,0xff523611,0x21e80000,0x40040000
-	.long	0xc2c75bcd,0x105d7c23,0x20d00000,0x40040000
-	.long	0xc90fdaa2,0x2168c235,0xa1800000,0xf2104800
-	.long	0x22103228,0x00040281,0x7fffffff,0x0c813fd7
-	.long	0x80006c04,0x60000134,0x0c814004,0xbc7e6d04
-	.long	0x60000144,0xf2000080,0xf23a54a3,0xd3d443fa
-	.long	0xfdbcf201,0x6080e981,0xd3c1f219,0x4828f211
-	.long	0x4428ea99,0x02818000,0x0000f227,0xe00c0c81
-	.long	0x00000000,0x6d000072,0xf2000080,0xf20004a3
-	.long	0xf23a5580,0xfaf8f23a,0x5500fafa,0xf20005a3
-	.long	0xf2000523,0xf23a55a2,0xfaf4f23a,0x4922fafe
-	.long	0xf20005a3,0xf2000523,0xf23a49a2,0xfb00f23a
-	.long	0x4922fb0a,0xf20005a3,0xf2000523,0xf23a49a2
-	.long	0xfb0cf200,0x0123f200,0x0ca3f200,0x0822f23c
-	.long	0x44a23f80,0x0000f21f,0xd030f200,0x9000f200
-	.long	0x042060ff,0x000038d8,0xf2000080,0xf2000023
-	.long	0xf23a5580,0xfa88f23a,0x5500fa8a,0xf20001a3
-	.long	0xf2000123,0xf23a55a2,0xfa84f23a,0x4922fa8e
-	.long	0xf20001a3,0xf2000123,0xf23a49a2,0xfa90f23a
-	.long	0x4922fa9a,0xf20001a3,0xf2000123,0xf23a49a2
-	.long	0xfa9cf200,0x0523f200,0x0c23f200,0x08a2f23c
-	.long	0x44223f80,0x0000f21f,0xd030f227,0x68800a97
-	.long	0x80000000,0xf2009000,0xf21f4820,0x60ff0000
-	.long	0x385e0c81,0x3fff8000,0x6e1cf227,0x6800f200
-	.long	0x9000123c,0x0003f21f,0x480060ff,0x00003832
-	.long	0x60ff0000,0x36cef227,0xe03c2f02,0xf23c4480
-	.long	0x00000000,0x0c817ffe,0xffff6652,0x3d7c7ffe
-	.long	0xff842d7c,0xc90fdaa2,0xff8842ae,0xff8c3d7c
-	.long	0x7fdcff90,0x2d7c85a3,0x08d3ff94,0x42aeff98
-	.long	0xf200003a,0xf294000e,0x002e0080,0xff84002e
-	.long	0x0080ff90,0xf22e4822,0xff84f200,0x0080f22e
-	.long	0x4822ff90,0xf20000a8,0xf22e48a2,0xff90f22e
-	.long	0x6800ff84,0x322eff84,0x22410281,0x00007fff
-	.long	0x04810000,0x3fff0c81,0x0000001c,0x6f0e0481
-	.long	0x0000001b,0x1d7c0000,0xff586008,0x42811d7c
-	.long	0x0001ff58,0x243c0000,0x3ffe9481,0x2d7ca2f9
-	.long	0x836eff88,0x2d7c4e44,0x152aff8c,0x3d42ff84
-	.long	0xf2000100,0xf22e4923,0xff842409,0x48420282
-	.long	0x80000000,0x00825f00,0x00002d42,0xff54f22e
-	.long	0x4522ff54,0xf22e4528,0xff542401,0x06820000
-	.long	0x3fff3d42,0xff842d7c,0xc90fdaa2,0xff8842ae
-	.long	0xff8c0681,0x00003fdd,0x3d41ff90,0x2d7c85a3
-	.long	0x08d3ff94,0x42aeff98,0x122eff58,0xf2000a00
-	.long	0xf22e4a23,0xff84f200,0x0a80f22e,0x4aa3ff90
-	.long	0xf2001180,0xf20015a2,0xf2000e28,0xf2000c28
-	.long	0xf2001622,0xf2000180,0xf20010a8,0xf2000422
-	.long	0x0c010000,0x6e00000e,0xf20001a8,0xf2000ca2
-	.long	0x6000ff0c,0xf22e6100,0xff54241f,0xf21fd03c
-	.long	0x222eff54,0xe2996000,0xfd72bff6,0x687e3149
-	.long	0x87d84002,0xac6934a2,0x6db3bfc2,0x476f4e1d
-	.long	0xa28e3fb3,0x44447f87,0x6989bfb7,0x44ee7faf
-	.long	0x45db3fbc,0x71c64694,0x0220bfc2,0x49249218
-	.long	0x72f93fc9,0x99999999,0x8fa9bfd5,0x55555555
-	.long	0x5555bfb7,0x0bf39853,0x9e6a3fbc,0x7187962d
-	.long	0x1d7dbfc2,0x49248271,0x07b83fc9,0x99999996
-	.long	0x263ebfd5,0x55555555,0x55363fff,0x0000c90f
-	.long	0xdaa22168,0xc2350000,0x0000bfff,0x0000c90f
-	.long	0xdaa22168,0xc2350000,0x00000001,0x00008000
-	.long	0x00000000,0x00000000,0x00008001,0x00008000
-	.long	0x00000000,0x00000000,0x00003ffb,0x000083d1
-	.long	0x52c5060b,0x7a510000,0x00003ffb,0x00008bc8
-	.long	0x54456549,0x8b8b0000,0x00003ffb,0x000093be
-	.long	0x40601762,0x6b0d0000,0x00003ffb,0x00009bb3
-	.long	0x078d35ae,0xc2020000,0x00003ffb,0x0000a3a6
-	.long	0x9a525ddc,0xe7de0000,0x00003ffb,0x0000ab98
-	.long	0xe9436276,0x56190000,0x00003ffb,0x0000b389
-	.long	0xe502f9c5,0x98620000,0x00003ffb,0x0000bb79
-	.long	0x7e436b09,0xe6fb0000,0x00003ffb,0x0000c367
-	.long	0xa5c739e5,0xf4460000,0x00003ffb,0x0000cb54
-	.long	0x4c61cff7,0xd5c60000,0x00003ffb,0x0000d33f
-	.long	0x62f82488,0x533e0000,0x00003ffb,0x0000db28
-	.long	0xda816240,0x4c770000,0x00003ffb,0x0000e310
-	.long	0xa4078ad3,0x4f180000,0x00003ffb,0x0000eaf6
-	.long	0xb0a8188e,0xe1eb0000,0x00003ffb,0x0000f2da
-	.long	0xf1949dbe,0x79d50000,0x00003ffb,0x0000fabd
-	.long	0x581361d4,0x7e3e0000,0x00003ffc,0x00008346
-	.long	0xac210959,0xecc40000,0x00003ffc,0x00008b23
-	.long	0x2a083042,0x82d80000,0x00003ffc,0x000092fb
-	.long	0x70b8d29a,0xe2f90000,0x00003ffc,0x00009acf
-	.long	0x476f5ccd,0x1cb40000,0x00003ffc,0x0000a29e
-	.long	0x76304954,0xf23f0000,0x00003ffc,0x0000aa68
-	.long	0xc5d08ab8,0x52300000,0x00003ffc,0x0000b22d
-	.long	0xfffd9d53,0x9f830000,0x00003ffc,0x0000b9ed
-	.long	0xef453e90,0x0ea50000,0x00003ffc,0x0000c1a8
-	.long	0x5f1cc75e,0x3ea50000,0x00003ffc,0x0000c95d
-	.long	0x1be82813,0x8de60000,0x00003ffc,0x0000d10b
-	.long	0xf300840d,0x2de40000,0x00003ffc,0x0000d8b4
-	.long	0xb2ba6bc0,0x5e7a0000,0x00003ffc,0x0000e057
-	.long	0x2a6bb423,0x35f60000,0x00003ffc,0x0000e7f3
-	.long	0x2a70ea9c,0xaa8f0000,0x00003ffc,0x0000ef88
-	.long	0x843264ec,0xefaa0000,0x00003ffc,0x0000f717
-	.long	0x0a28ecc0,0x66660000,0x00003ffd,0x0000812f
-	.long	0xd288332d,0xad320000,0x00003ffd,0x000088a8
-	.long	0xd1b1218e,0x4d640000,0x00003ffd,0x00009012
-	.long	0xab3f23e4,0xaee80000,0x00003ffd,0x0000976c
-	.long	0xc3d411e7,0xf1b90000,0x00003ffd,0x00009eb6
-	.long	0x89493889,0xa2270000,0x00003ffd,0x0000a5ef
-	.long	0x72c34487,0x361b0000,0x00003ffd,0x0000ad17
-	.long	0x00baf07a,0x72270000,0x00003ffd,0x0000b42c
-	.long	0xbcfafd37,0xefb70000,0x00003ffd,0x0000bb30
-	.long	0x3a940ba8,0x0f890000,0x00003ffd,0x0000c221
-	.long	0x15c6fcae,0xbbaf0000,0x00003ffd,0x0000c8fe
-	.long	0xf3e68633,0x12210000,0x00003ffd,0x0000cfc9
-	.long	0x8330b400,0x0c700000,0x00003ffd,0x0000d680
-	.long	0x7aa1102c,0x5bf90000,0x00003ffd,0x0000dd23
-	.long	0x99bc3125,0x2aa30000,0x00003ffd,0x0000e3b2
-	.long	0xa8556b8f,0xc5170000,0x00003ffd,0x0000ea2d
-	.long	0x764f6431,0x59890000,0x00003ffd,0x0000f3bf
-	.long	0x5bf8bad1,0xa21d0000,0x00003ffe,0x0000801c
-	.long	0xe39e0d20,0x5c9a0000,0x00003ffe,0x00008630
-	.long	0xa2dada1e,0xd0660000,0x00003ffe,0x00008c1a
-	.long	0xd445f3e0,0x9b8c0000,0x00003ffe,0x000091db
-	.long	0x8f1664f3,0x50e20000,0x00003ffe,0x00009773
-	.long	0x1420365e,0x538c0000,0x00003ffe,0x00009ce1
-	.long	0xc8e6a0b8,0xcdba0000,0x00003ffe,0x0000a228
-	.long	0x32dbcada,0xae090000,0x00003ffe,0x0000a746
-	.long	0xf2ddb760,0x22940000,0x00003ffe,0x0000ac3e
-	.long	0xc0fb997d,0xd6a20000,0x00003ffe,0x0000b110
-	.long	0x688aebdc,0x6f6a0000,0x00003ffe,0x0000b5bc
-	.long	0xc49059ec,0xc4b00000,0x00003ffe,0x0000ba44
-	.long	0xbc7dd470,0x782f0000,0x00003ffe,0x0000bea9
-	.long	0x4144fd04,0x9aac0000,0x00003ffe,0x0000c2eb
-	.long	0x4abb6616,0x28b60000,0x00003ffe,0x0000c70b
-	.long	0xd54ce602,0xee140000,0x00003ffe,0x0000cd00
-	.long	0x0549adec,0x71590000,0x00003ffe,0x0000d484
-	.long	0x57d2d8ea,0x4ea30000,0x00003ffe,0x0000db94
-	.long	0x8da712de,0xce3b0000,0x00003ffe,0x0000e238
-	.long	0x55f969e8,0x096a0000,0x00003ffe,0x0000e877
-	.long	0x1129c435,0x32590000,0x00003ffe,0x0000ee57
-	.long	0xc16e0d37,0x9c0d0000,0x00003ffe,0x0000f3e1
-	.long	0x0211a87c,0x37790000,0x00003ffe,0x0000f919
-	.long	0x039d758b,0x8d410000,0x00003ffe,0x0000fe05
-	.long	0x8b8f6493,0x5fb30000,0x00003fff,0x00008155
-	.long	0xfb497b68,0x5d040000,0x00003fff,0x00008388
-	.long	0x9e3549d1,0x08e10000,0x00003fff,0x0000859c
-	.long	0xfa76511d,0x724b0000,0x00003fff,0x00008795
-	.long	0x2ecfff81,0x31e70000,0x00003fff,0x00008973
-	.long	0x2fd19557,0x641b0000,0x00003fff,0x00008b38
-	.long	0xcad10193,0x2a350000,0x00003fff,0x00008ce7
-	.long	0xa8d8301e,0xe6b50000,0x00003fff,0x00008f46
-	.long	0xa39e2eae,0x52810000,0x00003fff,0x0000922d
-	.long	0xa7d79188,0x84870000,0x00003fff,0x000094d1
-	.long	0x9fcbdedf,0x52410000,0x00003fff,0x0000973a
-	.long	0xb94419d2,0xa08b0000,0x00003fff,0x0000996f
-	.long	0xf00e08e1,0x0b960000,0x00003fff,0x00009b77
-	.long	0x3f951232,0x1da70000,0x00003fff,0x00009d55
-	.long	0xcc320f93,0x56240000,0x00003fff,0x00009f10
-	.long	0x0575006c,0xc5710000,0x00003fff,0x0000a0a9
-	.long	0xc290d97c,0xc06c0000,0x00003fff,0x0000a226
-	.long	0x59ebebc0,0x630a0000,0x00003fff,0x0000a388
-	.long	0xb4aff6ef,0x0ec90000,0x00003fff,0x0000a4d3
-	.long	0x5f1061d2,0x92c40000,0x00003fff,0x0000a608
-	.long	0x95dcfbe3,0x187e0000,0x00003fff,0x0000a72a
-	.long	0x51dc7367,0xbeac0000,0x00003fff,0x0000a83a
-	.long	0x51530956,0x168f0000,0x00003fff,0x0000a93a
-	.long	0x20077539,0x546e0000,0x00003fff,0x0000aa9e
-	.long	0x7245023b,0x26050000,0x00003fff,0x0000ac4c
-	.long	0x84ba6fe4,0xd58f0000,0x00003fff,0x0000adce
-	.long	0x4a4a606b,0x97120000,0x00003fff,0x0000af2a
-	.long	0x2dcd8d26,0x3c9c0000,0x00003fff,0x0000b065
-	.long	0x6f81f222,0x65c70000,0x00003fff,0x0000b184
-	.long	0x65150f71,0x496a0000,0x00003fff,0x0000b28a
-	.long	0xaa156f9a,0xda350000,0x00003fff,0x0000b37b
-	.long	0x44ff3766,0xb8950000,0x00003fff,0x0000b458
-	.long	0xc3dce963,0x04330000,0x00003fff,0x0000b525
-	.long	0x529d5622,0x46bd0000,0x00003fff,0x0000b5e2
-	.long	0xcca95f9d,0x88cc0000,0x00003fff,0x0000b692
-	.long	0xcada7aca,0x1ada0000,0x00003fff,0x0000b736
-	.long	0xaea7a692,0x58380000,0x00003fff,0x0000b7cf
-	.long	0xab287e9f,0x7b360000,0x00003fff,0x0000b85e
-	.long	0xcc66cb21,0x98350000,0x00003fff,0x0000b8e4
-	.long	0xfd5a20a5,0x93da0000,0x00003fff,0x0000b99f
-	.long	0x41f64aff,0x9bb50000,0x00003fff,0x0000ba7f
-	.long	0x1e17842b,0xbe7b0000,0x00003fff,0x0000bb47
-	.long	0x12857637,0xe17d0000,0x00003fff,0x0000bbfa
-	.long	0xbe8a4788,0xdf6f0000,0x00003fff,0x0000bc9d
-	.long	0x0fad2b68,0x9d790000,0x00003fff,0x0000bd30
-	.long	0x6a39471e,0xcd860000,0x00003fff,0x0000bdb6
-	.long	0xc731856a,0xf18a0000,0x00003fff,0x0000be31
-	.long	0xcac502e8,0x0d700000,0x00003fff,0x0000bea2
-	.long	0xd55ce331,0x94e20000,0x00003fff,0x0000bf0b
-	.long	0x10b7c031,0x28f00000,0x00003fff,0x0000bf6b
-	.long	0x7a18dacb,0x778d0000,0x00003fff,0x0000bfc4
-	.long	0xea4663fa,0x18f60000,0x00003fff,0x0000c018
-	.long	0x1bde8b89,0xa4540000,0x00003fff,0x0000c065
-	.long	0xb066cfbf,0x64390000,0x00003fff,0x0000c0ae
-	.long	0x345f5634,0x0ae60000,0x00003fff,0x0000c0f2
-	.long	0x22919cb9,0xe6a70000,0x0000f210,0x48002210
-	.long	0x32280004,0xf22e6800,0xff840281,0x7fffffff
-	.long	0x0c813ffb,0x80006c04,0x600000d0,0x0c814002
-	.long	0xffff6f04,0x6000014c,0x02aef800,0x0000ff88
-	.long	0x00ae0400,0x0000ff88,0x2d7c0000,0x0000ff8c
-	.long	0xf2000080,0xf22e48a3,0xff84f22e,0x4828ff84
-	.long	0xf23c44a2,0x3f800000,0xf2000420,0x2f022401
-	.long	0x02810000,0x78000282,0x7fff0000,0x04823ffb
-	.long	0x0000e282,0xd282ee81,0x43faf780,0xd3c12d59
-	.long	0xff902d59,0xff942d59,0xff98222e,0xff840281
-	.long	0x80000000,0x83aeff90,0x241ff227,0xe004f200
-	.long	0x0080f200,0x04a3f23a,0x5500f6a0,0xf2000522
-	.long	0xf2000523,0xf20000a3,0xf23a5522,0xf696f23a
-	.long	0x54a3f698,0xf20008a3,0xf2000422,0xf21fd020
-	.long	0xf2009000,0xf22e4822,0xff9060ff,0x00002d30
-	.long	0x0c813fff,0x80006e00,0x008a0c81,0x3fd78000
-	.long	0x6d00006c,0xf227e00c,0xf2000023,0xf2000080
-	.long	0xf20004a3,0xf23a5500,0xf65af23a,0x5580f65c
-	.long	0xf2000523,0xf20005a3,0xf23a5522,0xf656f23a
-	.long	0x55a2f658,0xf2000523,0xf2000ca3,0xf23a5522
-	.long	0xf652f23a,0x54a2f654,0xf2000123,0xf22e4823
-	.long	0xff84f200,0x08a2f200,0x0423f21f,0xd030f200
-	.long	0x9000f22e,0x4822ff84,0x60ff0000,0x2cb2f200
-	.long	0x9000123c,0x0003f22e,0x4800ff84,0x60ff0000
-	.long	0x2c900c81,0x40638000,0x6e00008e,0xf227e00c
-	.long	0xf23c4480,0xbf800000,0xf20000a0,0xf2000400
-	.long	0xf2000023,0xf22e6880,0xff84f200,0x0080f200
-	.long	0x04a3f23a,0x5580f5ec,0xf23a5500,0xf5eef200
-	.long	0x05a3f200,0x0523f23a,0x55a2f5e8,0xf23a5522
-	.long	0xf5eaf200,0x0ca3f200,0x0123f23a,0x54a2f5e4
-	.long	0xf22e4823,0xff84f200,0x08a2f200,0x0423f22e
-	.long	0x4822ff84,0xf21fd030,0xf2009000,0x4a106a0c
-	.long	0xf23a4822,0xf5d660ff,0x00002c24,0xf23a4822
-	.long	0xf5ba60ff,0x00002c10,0x4a106a16,0xf23a4800
-	.long	0xf5baf200,0x9000f23a,0x4822f5c0,0x60ff0000
-	.long	0x2bfef23a,0x4800f594,0xf2009000,0xf23a4822
-	.long	0xf5ba60ff,0x00002be0,0x60ff0000,0x2a66f210
-	.long	0x48002210,0x32280004,0x02817fff,0xffff0c81
-	.long	0x3fff8000,0x6c4e0c81,0x3fd78000,0x6d00007c
-	.long	0xf23c4480,0x3f800000,0xf20000a8,0xf227e004
-	.long	0xf23c4500,0x3f800000,0xf2000122,0xf20008a3
-	.long	0xf21fd020,0xf2000484,0xf2000420,0xf227e001
-	.long	0x41d761ff,0xfffffd66,0xdffc0000,0x000c60ff
-	.long	0x00002b6c,0xf2000018,0xf23c4438,0x3f800000
-	.long	0xf2d20000,0x29d4f23a,0x4800c5a6,0x22100281
-	.long	0x80000000,0x00813f80,0x00002f01,0xf2009000
-	.long	0xf21f4423,0x60ff0000,0x2b36f200,0x9000123c
-	.long	0x0003f210,0x480060ff,0x00002b16,0x60ff0000
-	.long	0x29b2f210,0x48002210,0x32280004,0x02817fff
-	.long	0xffff0c81,0x3fff8000,0x6c44f23c,0x44803f80
-	.long	0x0000f200,0x00a2f200,0x001af23c,0x44223f80
-	.long	0x0000f200,0x0420f200,0x00042f00,0x4280f227
-	.long	0xe00141d7,0x61ffffff,0xfcc4dffc,0x0000000c
-	.long	0xf21f9000,0xf2000022,0x60ff0000,0x2acaf200
-	.long	0x0018f23c,0x44383f80,0x0000f2d2,0x0000292a
-	.long	0x4a106a18,0xf23a4800,0xc4e8f200,0x9000f23c
-	.long	0x44220080,0x000060ff,0x00002a9c,0x60ff0000
-	.long	0x2ce8f200,0x9000f23a,0x4800c4d6,0x60ff0000
-	.long	0x2a863fdc,0x000082e3,0x08654361,0xc4c60000
-	.long	0x00003fa5,0x55555555,0x4cc13fc5,0x55555555
-	.long	0x4a543f81,0x11111117,0x43853fa5,0x55555555
-	.long	0x4f5a3fc5,0x55555555,0x55550000,0x00000000
-	.long	0x00003ec7,0x1de3a577,0x46823efa,0x01a019d7
-	.long	0xcb683f2a,0x01a01a01,0x9df33f56,0xc16c16c1
-	.long	0x70e23f81,0x11111111,0x11113fa5,0x55555555
-	.long	0x55553ffc,0x0000aaaa,0xaaaaaaaa,0xaaab0000
-	.long	0x000048b0,0x00000000,0x00003730,0x00000000
-	.long	0x00003fff,0x00008000,0x00000000,0x00000000
-	.long	0x00003fff,0x00008164,0xd1f3bc03,0x07749f84
-	.long	0x1a9b3fff,0x000082cd,0x8698ac2b,0xa1d89fc1
-	.long	0xd5b93fff,0x0000843a,0x28c3acde,0x4048a072
-	.long	0x83693fff,0x000085aa,0xc367cc48,0x7b141fc5
-	.long	0xc95c3fff,0x0000871f,0x61969e8d,0x10101ee8
-	.long	0x5c9f3fff,0x00008898,0x0e8092da,0x85289fa2
-	.long	0x07293fff,0x00008a14,0xd575496e,0xfd9ca07b
-	.long	0xf9af3fff,0x00008b95,0xc1e3ea8b,0xd6e8a002
-	.long	0x0dcf3fff,0x00008d1a,0xdf5b7e5b,0xa9e4205a
-	.long	0x63da3fff,0x00008ea4,0x398b45cd,0x53c01eb7
-	.long	0x00513fff,0x00009031,0xdc431466,0xb1dc1f6e
-	.long	0xb0293fff,0x000091c3,0xd373ab11,0xc338a078
-	.long	0x14943fff,0x0000935a,0x2b2f13e6,0xe92c9eb3
-	.long	0x19b03fff,0x000094f4,0xefa8fef7,0x09602017
-	.long	0x457d3fff,0x00009694,0x2d372018,0x5a001f11
-	.long	0xd5373fff,0x00009837,0xf0518db8,0xa9709fb9
-	.long	0x52dd3fff,0x000099e0,0x459320b7,0xfa641fe4
-	.long	0x30873fff,0x00009b8d,0x39b9d54e,0x55381fa2
-	.long	0xa8183fff,0x00009d3e,0xd9a72cff,0xb7501fde
-	.long	0x494d3fff,0x00009ef5,0x326091a1,0x11ac2050
-	.long	0x48903fff,0x0000a0b0,0x510fb971,0x4fc4a073
-	.long	0x691c3fff,0x0000a270,0x43030c49,0x68181f9b
-	.long	0x7a053fff,0x0000a435,0x15ae09e6,0x80a0a079
-	.long	0x71263fff,0x0000a5fe,0xd6a9b151,0x38eca071
-	.long	0xa1403fff,0x0000a7cd,0x93b4e965,0x3568204f
-	.long	0x62da3fff,0x0000a9a1,0x5ab4ea7c,0x0ef81f28
-	.long	0x3c4a3fff,0x0000ab7a,0x39b5a93e,0xd3389f9a
-	.long	0x7fdc3fff,0x0000ad58,0x3eea42a1,0x4ac8a05b
-	.long	0x3fac3fff,0x0000af3b,0x78ad690a,0x43741fdf
-	.long	0x26103fff,0x0000b123,0xf581d2ac,0x25909f70
-	.long	0x5f903fff,0x0000b311,0xc412a911,0x2488201f
-	.long	0x678a3fff,0x0000b504,0xf333f9de,0x64841f32
-	.long	0xfb133fff,0x0000b6fd,0x91e328d1,0x77902003
-	.long	0x8b303fff,0x0000b8fb,0xaf4762fb,0x9ee8200d
-	.long	0xc3cc3fff,0x0000baff,0x5ab2133e,0x45fc9f8b
-	.long	0x2ae63fff,0x0000bd08,0xa39f580c,0x36c0a02b
-	.long	0xbf703fff,0x0000bf17,0x99b67a73,0x1084a00b
-	.long	0xf5183fff,0x0000c12c,0x4cca6670,0x9458a041
-	.long	0xdd413fff,0x0000c346,0xccda2497,0x64089fdf
-	.long	0x137b3fff,0x0000c567,0x2a115506,0xdadc201f
-	.long	0x15683fff,0x0000c78d,0x74c8abb9,0xb15c1fc1
-	.long	0x3a2e3fff,0x0000c9b9,0xbd866e2f,0x27a4a03f
-	.long	0x8f033fff,0x0000cbec,0x14fef272,0x7c5c1ff4
-	.long	0x907d3fff,0x0000ce24,0x8c151f84,0x80e49e6e
-	.long	0x53e43fff,0x0000d063,0x33daef2b,0x25941fd6
-	.long	0xd45c3fff,0x0000d2a8,0x1d91f12a,0xe45ca076
-	.long	0xedb93fff,0x0000d4f3,0x5aabcfed,0xfa209fa6
-	.long	0xde213fff,0x0000d744,0xfccad69d,0x6af41ee6
-	.long	0x9a2f3fff,0x0000d99d,0x15c278af,0xd7b4207f
-	.long	0x439f3fff,0x0000dbfb,0xb797daf2,0x3754201e
-	.long	0xc2073fff,0x0000de60,0xf4825e0e,0x91249e8b
-	.long	0xe1753fff,0x0000e0cc,0xdeec2a94,0xe1102003
-	.long	0x2c4b3fff,0x0000e33f,0x8972be8a,0x5a502004
-	.long	0xdff53fff,0x0000e5b9,0x06e77c83,0x48a81e72
-	.long	0xf47a3fff,0x0000e839,0x6a503c4b,0xdc681f72
-	.long	0x2f223fff,0x0000eac0,0xc6e7dd24,0x3930a017
-	.long	0xe9453fff,0x0000ed4f,0x301ed994,0x2b841f40
-	.long	0x1a5b3fff,0x0000efe4,0xb99bdcda,0xf5cc9fb9
-	.long	0xa9e33fff,0x0000f281,0x773c59ff,0xb1382074
-	.long	0x4c053fff,0x0000f525,0x7d152486,0xcc2c1f77
-	.long	0x3a193fff,0x0000f7d0,0xdf730ad1,0x3bb81ffe
-	.long	0x90d53fff,0x0000fa83,0xb2db722a,0x033ca041
-	.long	0xed223fff,0x0000fd3e,0x0c0cf486,0xc1741f85
-	.long	0x3f3a2210,0x02817fff,0x00000c81,0x3fbe0000
-	.long	0x6c0660ff,0x00000108,0x32280004,0x0c81400c
-	.long	0xb1676d06,0x60ff0000,0x010cf210,0x4800f200
-	.long	0x0080f23c,0x442342b8,0xaa3bf227,0xe00c2d7c
-	.long	0x00000000,0xff58f201,0x600043fa,0xfbb6f201
-	.long	0x40002d41,0xff540281,0x0000003f,0xe989d3c1
-	.long	0x222eff54,0xec810641,0x3fff3d7a,0xfb06ff54
-	.long	0xf2000100,0xf23c4423,0xbc317218,0xf23a4923
-	.long	0xfaf2f200,0x0422f200,0x0822f200,0x0080f200
-	.long	0x04a3f23c,0x45003ab6,0x0b70f200,0x0523f200
-	.long	0x0580f23c,0x45a33c08,0x8895f23a,0x5522fad4
-	.long	0xf23a55a2,0xfad6f200,0x05233d41,0xff842d7c
-	.long	0x80000000,0xff8842ae,0xff8cf200,0x05a3f23c
-	.long	0x45223f00,0x0000f200,0x01a3f200,0x0523f200
-	.long	0x0c22f219,0x4880f200,0x0822f200,0x0423f21f
-	.long	0xd030f211,0x4422f200,0x0422222e,0xff584a81
-	.long	0x6706f22e,0x4823ff90,0xf2009000,0x123c0000
-	.long	0xf22e4823,0xff8460ff,0x000024c6,0xf210d080
-	.long	0xf2009000,0xf23c4422,0x3f800000,0x60ff0000
-	.long	0x24c60c81,0x400cb27c,0x6e66f210,0x4800f200
-	.long	0x0080f23c,0x442342b8,0xaa3bf227,0xe00c2d7c
-	.long	0x00000001,0xff58f201,0x600043fa,0xfaa6f201
-	.long	0x40002d41,0xff540281,0x0000003f,0xe989d3c1
-	.long	0x222eff54,0xec812d41,0xff54e281,0x93aeff54
-	.long	0x06413fff,0x3d41ff90,0x2d7c8000,0x0000ff94
-	.long	0x42aeff98,0x222eff54,0x06413fff,0x6000fed2
-	.long	0x4a106bff,0x00002370,0x60ff0000,0x24122f10
-	.long	0x02978000,0x00000097,0x00800000,0xf23c4400
-	.long	0x3f800000,0xf2009000,0xf21f4422,0x60ff0000
-	.long	0x24262210,0x02817fff,0x00000c81,0x3ffd0000
-	.long	0x6c0660ff,0x0000015e,0x32280004,0x0c814004
-	.long	0xc2156f06,0x60ff0000,0x026cf210,0x4800f200
-	.long	0x0080f23c,0x442342b8,0xaa3bf227,0xe00cf201
-	.long	0x600043fa,0xf9eef201,0x40002d41,0xff540281
-	.long	0x0000003f,0xe989d3c1,0x222eff54,0xec812d41
-	.long	0xff54f200,0x0100f23c,0x4423bc31,0x7218f23a
-	.long	0x4923f930,0xf2000422,0xf2000822,0x06413fff
-	.long	0xf2000080,0xf20004a3,0xf23c4500,0x3950097b
-	.long	0xf2000523,0xf2000580,0xf23c45a3,0x3ab60b6a
-	.long	0xf23a5522,0xf91ef23a,0x55a2f920,0x3d41ff84
-	.long	0x2d7c8000,0x0000ff88,0x42aeff8c,0xf2000523
-	.long	0x222eff54,0x4441f200,0x05a30641,0x3ffff23a
-	.long	0x5522f900,0xf23c45a2,0x3f000000,0xf2000523
-	.long	0x00418000,0x3d41ff90,0x2d7c8000,0x0000ff94
-	.long	0x42aeff98,0xf2000ca3,0xf2000123,0xf2000422
-	.long	0xf2000822,0xf21fd030,0xf2114823,0x222eff54
-	.long	0x0c810000,0x003f6f1a,0xf2294480,0x000cf22e
-	.long	0x48a2ff90,0xf2000422,0xf2114822,0x60ff0000
-	.long	0x00340c81,0xfffffffd,0x6c16f229,0x4422000c
-	.long	0xf2114822,0xf22e4822,0xff9060ff,0x00000016
-	.long	0xf2194880,0xf2114422,0xf22e48a2,0xff90f200
-	.long	0x0422f200,0x9000f22e,0x4823ff84,0x60ff0000
-	.long	0x22ae0c81,0x3fbe0000,0x6c6c0c81,0x00330000
-	.long	0x6d2c2d7c,0x80010000,0xff842d7c,0x80000000
-	.long	0xff8842ae,0xff8cf210,0x4800f200,0x9000123c
-	.long	0x0002f22e,0x4822ff84,0x60ff0000,0x2264f210
-	.long	0x4800f23a,0x5423f86c,0x2d7c8001,0x0000ff84
-	.long	0x2d7c8000,0x0000ff88,0x42aeff8c,0xf22e4822
-	.long	0xff84f200,0x9000123c,0x0000f23a,0x5423f84c
-	.long	0x60ff0000,0x222cf210,0x4800f200,0x0023f227
-	.long	0xe00cf23c,0x44802f30,0xcaa8f200,0x00a3f23c
-	.long	0x4500310f,0x8290f23c,0x44a232d7,0x3220f200
-	.long	0x0123f200,0x00a3f23c,0x45223493,0xf281f23a
-	.long	0x54a2f7c0,0xf2000123,0xf20000a3,0xf23a5522
-	.long	0xf7baf23a,0x54a2f7bc,0xf2000123,0xf20000a3
-	.long	0xf23a5522,0xf7b6f23a,0x54a2f7b8,0xf2000123
-	.long	0xf20000a3,0xf23a5522,0xf7b2f23a,0x48a2f7b4
-	.long	0xf2000123,0xf20000a3,0xf2000123,0xf21048a3
-	.long	0xf23c4423,0x3f000000,0xf20008a2,0xf21fd030
-	.long	0xf2000422,0xf2009000,0xf2104822,0x60ff0000
-	.long	0x218e2210,0x0c810000,0x00006e00,0xfbacf23c
-	.long	0x4400bf80,0x0000f200,0x9000f23c,0x44220080
-	.long	0x000060ff,0x00002178,0x60ff0000,0x1ff63028
-	.long	0x00000880,0x000f0440,0x3ffff200,0x50006d02
-	.long	0x4e751d7c,0x0008ff64,0x4e7561ff,0x00007cfc
-	.long	0x44400440,0x3ffff200,0x50001d7c,0x0008ff64
-	.long	0x4e753028,0x00000040,0x7fff0880,0x000e2d68
-	.long	0x0004ff88,0x2d680008,0xff8c3d40,0xff84f22e
-	.long	0x4800ff84,0x6b024e75,0x1d7c0008,0xff644e75
-	.long	0x61ff0000,0x7cb660ca,0x7ffb0000,0x80000000
-	.long	0x00000000,0x00000000,0xf2104800,0x22103228
-	.long	0x00040281,0x7fffffff,0x0c81400c,0xb1676e42
-	.long	0xf2000018,0x2f004280,0xf227e001,0x41d761ff
-	.long	0xfffffad2,0xdffc0000,0x000cf23c,0x44233f00
-	.long	0x0000201f,0xf23c4480,0x3e800000,0xf20000a0
-	.long	0xf2009000,0x123c0002,0xf2000422,0x60ff0000
-	.long	0x20800c81,0x400cb2b3,0x6e3cf200,0x0018f23a
-	.long	0x5428baae,0xf23a5428,0xbab02f00,0x4280f227
-	.long	0xe00141d7,0x61ffffff,0xfa7cdffc,0x0000000c
-	.long	0x201ff200,0x9000123c,0x0000f23a,0x4823ff5a
-	.long	0x60ff0000,0x203c60ff,0x00002014,0xf23c4400
-	.long	0x3f800000,0xf2009000,0xf23c4422,0x00800000
-	.long	0x60ff0000,0x2032f210,0x48002210,0x32280004
-	.long	0x22410281,0x7fffffff,0x0c81400c,0xb1676e62
-	.long	0xf2000018,0x48e78040,0xf227e001,0x41d74280
-	.long	0x61ffffff,0xfbe0dffc,0x0000000c,0xf23c9000
-	.long	0x00000000,0x4cdf0201,0xf2000080,0xf23c44a2
-	.long	0x3f800000,0xf2276800,0xf2000420,0x22090281
-	.long	0x80000000,0x00813f00,0x0000f21f,0x48222f01
-	.long	0xf2009000,0x123c0000,0xf21f4423,0x60ff0000
-	.long	0x1fa00c81,0x400cb2b3,0x6eff0000,0x1f4cf200
-	.long	0x0018f23a,0x5428b9ca,0x2f3c0000,0x00002f3c
-	.long	0x80000000,0x22090281,0x80000000,0x00817ffb
-	.long	0x00002f01,0xf23a5428,0xb9b02f00,0x4280f227
-	.long	0xe00141d7,0x61ffffff,0xf97cdffc,0x0000000c
-	.long	0x201ff200,0x9000123c,0x0000f21f,0x482360ff
-	.long	0x00001f3e,0x60ff0000,0x1ddaf210,0x4800f22e
-	.long	0x6800ff84,0x22103228,0x00042d41,0xff840281
-	.long	0x7fffffff,0x0c813fd7,0x80006d00,0x00740c81
-	.long	0x3fffddce,0x6e00006a,0x222eff84,0x2d41ff5c
-	.long	0x02817fff,0x00000681,0x00010000,0x2d41ff84
-	.long	0x02ae8000,0x0000ff5c,0xf22e4800,0xff842f00
-	.long	0x4280f227,0xe00141d7,0x61ffffff,0xfac8dffc
-	.long	0x0000000c,0x201ff200,0x0080f23c,0x44a24000
-	.long	0x0000222e,0xff5cf22e,0x6880ff84,0xb3aeff84
-	.long	0xf2009000,0xf22e4820,0xff8460ff,0x00001eb0
-	.long	0x0c813fff,0x80006d00,0x00880c81,0x40048aa1
-	.long	0x6e000092,0x222eff84,0x2d41ff5c,0x02817fff
-	.long	0x00000681,0x00010000,0x2d41ff84,0x02ae8000
-	.long	0x0000ff5c,0x222eff5c,0xf22e4800,0xff842f00
-	.long	0x4280f227,0xe00141d7,0x61ffffff,0xf878dffc
-	.long	0x0000000c,0x201f222e,0xff5cf23c,0x44223f80
-	.long	0x00000a81,0xc0000000,0xf2014480,0xf20000a0
-	.long	0x222eff5c,0x00813f80,0x0000f201,0x4400f200
-	.long	0x9000123c,0x0002f200,0x042260ff,0x00001e20
-	.long	0xf2009000,0x123c0003,0xf22e4800,0xff8460ff
-	.long	0x00001dfe,0x222eff84,0x02818000,0x00000081
-	.long	0x3f800000,0xf2014400,0x02818000,0x00000a81
-	.long	0x80800000,0xf2009000,0xf2014422,0x60ff0000
-	.long	0x1dde60ff,0x00001c6c,0x3ffe0000,0xb17217f7
-	.long	0xd1cf79ac,0x00000000,0x3f800000,0x00000000
-	.long	0x7f800000,0xbf800000,0x3fc2499a,0xb5e4040b
-	.long	0xbfc555b5,0x848cb7db,0x3fc99999,0x987d8730
-	.long	0xbfcfffff,0xff6f7e97,0x3fd55555,0x555555a4
-	.long	0xbfe00000,0x00000008,0x3f175496,0xadd7dad6
-	.long	0x3f3c71c2,0xfe80c7e0,0x3f624924,0x928bccff
-	.long	0x3f899999,0x999995ec,0x3fb55555,0x55555555
-	.long	0x40000000,0x00000000,0x3f990000,0x80000000
-	.long	0x00000000,0x00000000,0x3ffe0000,0xfe03f80f
-	.long	0xe03f80fe,0x00000000,0x3ff70000,0xff015358
-	.long	0x833c47e2,0x00000000,0x3ffe0000,0xfa232cf2
-	.long	0x52138ac0,0x00000000,0x3ff90000,0xbdc8d83e
-	.long	0xad88d549,0x00000000,0x3ffe0000,0xf6603d98
-	.long	0x0f6603da,0x00000000,0x3ffa0000,0x9cf43dcf
-	.long	0xf5eafd48,0x00000000,0x3ffe0000,0xf2b9d648
-	.long	0x0f2b9d65,0x00000000,0x3ffa0000,0xda16eb88
-	.long	0xcb8df614,0x00000000,0x3ffe0000,0xef2eb71f
-	.long	0xc4345238,0x00000000,0x3ffb0000,0x8b29b775
-	.long	0x1bd70743,0x00000000,0x3ffe0000,0xebbdb2a5
-	.long	0xc1619c8c,0x00000000,0x3ffb0000,0xa8d839f8
-	.long	0x30c1fb49,0x00000000,0x3ffe0000,0xe865ac7b
-	.long	0x7603a197,0x00000000,0x3ffb0000,0xc61a2eb1
-	.long	0x8cd907ad,0x00000000,0x3ffe0000,0xe525982a
-	.long	0xf70c880e,0x00000000,0x3ffb0000,0xe2f2a47a
-	.long	0xde3a18af,0x00000000,0x3ffe0000,0xe1fc780e
-	.long	0x1fc780e2,0x00000000,0x3ffb0000,0xff64898e
-	.long	0xdf55d551,0x00000000,0x3ffe0000,0xdee95c4c
-	.long	0xa037ba57,0x00000000,0x3ffc0000,0x8db956a9
-	.long	0x7b3d0148,0x00000000,0x3ffe0000,0xdbeb61ee
-	.long	0xd19c5958,0x00000000,0x3ffc0000,0x9b8fe100
-	.long	0xf47ba1de,0x00000000,0x3ffe0000,0xd901b203
-	.long	0x6406c80e,0x00000000,0x3ffc0000,0xa9372f1d
-	.long	0x0da1bd17,0x00000000,0x3ffe0000,0xd62b80d6
-	.long	0x2b80d62c,0x00000000,0x3ffc0000,0xb6b07f38
-	.long	0xce90e46b,0x00000000,0x3ffe0000,0xd3680d36
-	.long	0x80d3680d,0x00000000,0x3ffc0000,0xc3fd0329
-	.long	0x06488481,0x00000000,0x3ffe0000,0xd0b69fcb
-	.long	0xd2580d0b,0x00000000,0x3ffc0000,0xd11de0ff
-	.long	0x15ab18ca,0x00000000,0x3ffe0000,0xce168a77
-	.long	0x25080ce1,0x00000000,0x3ffc0000,0xde1433a1
-	.long	0x6c66b150,0x00000000,0x3ffe0000,0xcb8727c0
-	.long	0x65c393e0,0x00000000,0x3ffc0000,0xeae10b5a
-	.long	0x7ddc8add,0x00000000,0x3ffe0000,0xc907da4e
-	.long	0x871146ad,0x00000000,0x3ffc0000,0xf7856e5e
-	.long	0xe2c9b291,0x00000000,0x3ffe0000,0xc6980c69
-	.long	0x80c6980c,0x00000000,0x3ffd0000,0x82012ca5
-	.long	0xa68206d7,0x00000000,0x3ffe0000,0xc4372f85
-	.long	0x5d824ca6,0x00000000,0x3ffd0000,0x882c5fcd
-	.long	0x7256a8c5,0x00000000,0x3ffe0000,0xc1e4bbd5
-	.long	0x95f6e947,0x00000000,0x3ffd0000,0x8e44c60b
-	.long	0x4ccfd7de,0x00000000,0x3ffe0000,0xbfa02fe8
-	.long	0x0bfa02ff,0x00000000,0x3ffd0000,0x944ad09e
-	.long	0xf4351af6,0x00000000,0x3ffe0000,0xbd691047
-	.long	0x07661aa3,0x00000000,0x3ffd0000,0x9a3eecd4
-	.long	0xc3eaa6b2,0x00000000,0x3ffe0000,0xbb3ee721
-	.long	0xa54d880c,0x00000000,0x3ffd0000,0xa0218434
-	.long	0x353f1de8,0x00000000,0x3ffe0000,0xb92143fa
-	.long	0x36f5e02e,0x00000000,0x3ffd0000,0xa5f2fcab
-	.long	0xbbc506da,0x00000000,0x3ffe0000,0xb70fbb5a
-	.long	0x19be3659,0x00000000,0x3ffd0000,0xabb3b8ba
-	.long	0x2ad362a5,0x00000000,0x3ffe0000,0xb509e68a
-	.long	0x9b94821f,0x00000000,0x3ffd0000,0xb1641795
-	.long	0xce3ca97b,0x00000000,0x3ffe0000,0xb30f6352
-	.long	0x8917c80b,0x00000000,0x3ffd0000,0xb7047551
-	.long	0x5d0f1c61,0x00000000,0x3ffe0000,0xb11fd3b8
-	.long	0x0b11fd3c,0x00000000,0x3ffd0000,0xbc952afe
-	.long	0xea3d13e1,0x00000000,0x3ffe0000,0xaf3addc6
-	.long	0x80af3ade,0x00000000,0x3ffd0000,0xc2168ed0
-	.long	0xf458ba4a,0x00000000,0x3ffe0000,0xad602b58
-	.long	0x0ad602b6,0x00000000,0x3ffd0000,0xc788f439
-	.long	0xb3163bf1,0x00000000,0x3ffe0000,0xab8f69e2
-	.long	0x8359cd11,0x00000000,0x3ffd0000,0xccecac08
-	.long	0xbf04565d,0x00000000,0x3ffe0000,0xa9c84a47
-	.long	0xa07f5638,0x00000000,0x3ffd0000,0xd2420487
-	.long	0x2dd85160,0x00000000,0x3ffe0000,0xa80a80a8
-	.long	0x0a80a80b,0x00000000,0x3ffd0000,0xd7894992
-	.long	0x3bc3588a,0x00000000,0x3ffe0000,0xa655c439
-	.long	0x2d7b73a8,0x00000000,0x3ffd0000,0xdcc2c4b4
-	.long	0x9887dacc,0x00000000,0x3ffe0000,0xa4a9cf1d
-	.long	0x96833751,0x00000000,0x3ffd0000,0xe1eebd3e
-	.long	0x6d6a6b9e,0x00000000,0x3ffe0000,0xa3065e3f
-	.long	0xae7cd0e0,0x00000000,0x3ffd0000,0xe70d785c
-	.long	0x2f9f5bdc,0x00000000,0x3ffe0000,0xa16b312e
-	.long	0xa8fc377d,0x00000000,0x3ffd0000,0xec1f392c
-	.long	0x5179f283,0x00000000,0x3ffe0000,0x9fd809fd
-	.long	0x809fd80a,0x00000000,0x3ffd0000,0xf12440d3
-	.long	0xe36130e6,0x00000000,0x3ffe0000,0x9e4cad23
-	.long	0xdd5f3a20,0x00000000,0x3ffd0000,0xf61cce92
-	.long	0x346600bb,0x00000000,0x3ffe0000,0x9cc8e160
-	.long	0xc3fb19b9,0x00000000,0x3ffd0000,0xfb091fd3
-	.long	0x8145630a,0x00000000,0x3ffe0000,0x9b4c6f9e
-	.long	0xf03a3caa,0x00000000,0x3ffd0000,0xffe97042
-	.long	0xbfa4c2ad,0x00000000,0x3ffe0000,0x99d722da
-	.long	0xbde58f06,0x00000000,0x3ffe0000,0x825efced
-	.long	0x49369330,0x00000000,0x3ffe0000,0x9868c809
-	.long	0x868c8098,0x00000000,0x3ffe0000,0x84c37a7a
-	.long	0xb9a905c9,0x00000000,0x3ffe0000,0x97012e02
-	.long	0x5c04b809,0x00000000,0x3ffe0000,0x87224c2e
-	.long	0x8e645fb7,0x00000000,0x3ffe0000,0x95a02568
-	.long	0x095a0257,0x00000000,0x3ffe0000,0x897b8cac
-	.long	0x9f7de298,0x00000000,0x3ffe0000,0x94458094
-	.long	0x45809446,0x00000000,0x3ffe0000,0x8bcf55de
-	.long	0xc4cd05fe,0x00000000,0x3ffe0000,0x92f11384
-	.long	0x0497889c,0x00000000,0x3ffe0000,0x8e1dc0fb
-	.long	0x89e125e5,0x00000000,0x3ffe0000,0x91a2b3c4
-	.long	0xd5e6f809,0x00000000,0x3ffe0000,0x9066e68c
-	.long	0x955b6c9b,0x00000000,0x3ffe0000,0x905a3863
-	.long	0x3e06c43b,0x00000000,0x3ffe0000,0x92aade74
-	.long	0xc7be59e0,0x00000000,0x3ffe0000,0x8f1779d9
-	.long	0xfdc3a219,0x00000000,0x3ffe0000,0x94e9bff6
-	.long	0x15845643,0x00000000,0x3ffe0000,0x8dda5202
-	.long	0x37694809,0x00000000,0x3ffe0000,0x9723a1b7
-	.long	0x20134203,0x00000000,0x3ffe0000,0x8ca29c04
-	.long	0x6514e023,0x00000000,0x3ffe0000,0x995899c8
-	.long	0x90eb8990,0x00000000,0x3ffe0000,0x8b70344a
-	.long	0x139bc75a,0x00000000,0x3ffe0000,0x9b88bdaa
-	.long	0x3a3dae2f,0x00000000,0x3ffe0000,0x8a42f870
-	.long	0x5669db46,0x00000000,0x3ffe0000,0x9db4224f
-	.long	0xffe1157c,0x00000000,0x3ffe0000,0x891ac73a
-	.long	0xe9819b50,0x00000000,0x3ffe0000,0x9fdadc26
-	.long	0x8b7a12da,0x00000000,0x3ffe0000,0x87f78087
-	.long	0xf78087f8,0x00000000,0x3ffe0000,0xa1fcff17
-	.long	0xce733bd4,0x00000000,0x3ffe0000,0x86d90544
-	.long	0x7a34acc6,0x00000000,0x3ffe0000,0xa41a9e8f
-	.long	0x5446fb9f,0x00000000,0x3ffe0000,0x85bf3761
-	.long	0x2cee3c9b,0x00000000,0x3ffe0000,0xa633cd7e
-	.long	0x6771cd8b,0x00000000,0x3ffe0000,0x84a9f9c8
-	.long	0x084a9f9d,0x00000000,0x3ffe0000,0xa8489e60
-	.long	0x0b435a5e,0x00000000,0x3ffe0000,0x83993052
-	.long	0x3fbe3368,0x00000000,0x3ffe0000,0xaa59233c
-	.long	0xcca4bd49,0x00000000,0x3ffe0000,0x828cbfbe
-	.long	0xb9a020a3,0x00000000,0x3ffe0000,0xac656dae
-	.long	0x6bcc4985,0x00000000,0x3ffe0000,0x81848da8
-	.long	0xfaf0d277,0x00000000,0x3ffe0000,0xae6d8ee3
-	.long	0x60bb2468,0x00000000,0x3ffe0000,0x80808080
-	.long	0x80808081,0x00000000,0x3ffe0000,0xb07197a2
-	.long	0x3c46c654,0x00000000,0xf2104800,0x2d7c0000
-	.long	0x0000ff54,0x22103228,0x00042d50,0xff842d68
-	.long	0x0004ff88,0x2d680008,0xff8c0c81,0x00000000
-	.long	0x6d000182,0x0c813ffe,0xf07d6d0a,0x0c813fff
-	.long	0x88416f00,0x00e2e081,0xe0810481,0x00003fff
-	.long	0xd2aeff54,0x41faf7b2,0xf2014080,0x2d7c3fff
-	.long	0x0000ff84,0x2d6eff88,0xff9402ae,0xfe000000
-	.long	0xff9400ae,0x01000000,0xff94222e,0xff940281
-	.long	0x7e000000,0xe081e081,0xe881d1c1,0xf22e4800
-	.long	0xff842d7c,0x3fff0000,0xff9042ae,0xff98f22e
-	.long	0x4828ff90,0xf227e00c,0xf2104823,0xf23a48a3
-	.long	0xf6c8f200,0x0100f200,0x0923f22e,0x6880ff84
-	.long	0xf2000980,0xf2000880,0xf23a54a3,0xf6ccf23a
-	.long	0x5523f6ce,0xf23a54a2,0xf6d0f23a,0x5522f6d2
-	.long	0xf2000ca3,0xf2000d23,0xf23a54a2,0xf6ccf23a
-	.long	0x5522f6ce,0xf2000ca3,0xd1fc0000,0x0010f200
-	.long	0x0d23f200,0x00a3f200,0x0822f210,0x48a2f21f
-	.long	0xd030f200,0x0422f200,0x9000f22e,0x4822ff84
-	.long	0x60ff0000,0x142af23c,0x58380001,0xf2c10000
-	.long	0x1678f200,0x0080f23a,0x44a8f64e,0xf23a4422
-	.long	0xf648f200,0x04a2f200,0x00a0f227,0xe00cf200
-	.long	0x0400f200,0x0023f22e,0x6880ff84,0xf2000080
-	.long	0xf20004a3,0xf23a5580,0xf660f23a,0x5500f662
-	.long	0xf20005a3,0xf2000523,0xf23a55a2,0xf65cf23a
-	.long	0x5522f65e,0xf2000ca3,0xf2000123,0xf23a54a2
-	.long	0xf658f22e,0x4823ff84,0xf20008a2,0xf21fd030
-	.long	0xf2000423,0xf2009000,0xf22e4822,0xff8460ff
-	.long	0x0000139c,0x60ff0000,0x12102d7c,0xffffff9c
-	.long	0xff5448e7,0x3f002610,0x28280004,0x2a280008
-	.long	0x42824a84,0x66342805,0x42857420,0x4286edc4
-	.long	0x6000edac,0xd4862d43,0xff842d44,0xff882d45
-	.long	0xff8c4482,0x2d42ff54,0xf22e4800,0xff844cdf
-	.long	0x00fc41ee,0xff846000,0xfe0c4286,0xedc46000
-	.long	0x2406edac,0x2e05edad,0x44860686,0x00000020
-	.long	0xecaf8887,0x2d43ff84,0x2d44ff88,0x2d45ff8c
-	.long	0x44822d42,0xff54f22e,0x4800ff84,0x4cdf00fc
-	.long	0x41eeff84,0x6000fdce,0xf2104800,0xf2000018
-	.long	0xf23a4838,0xf5a4f292,0x0014f200,0x9000123c
-	.long	0x0003f210,0x480060ff,0x000012d6,0xf2104800
-	.long	0x2d7c0000,0x0000ff54,0xf2000080,0xf23a4422
-	.long	0xf508f22e,0x6800ff84,0x3d6eff88,0xff86222e
-	.long	0xff840c81,0x00000000,0x6f0000da,0x0c813ffe
-	.long	0x80006d00,0xfda20c81,0x3fffc000,0x6e00fd98
-	.long	0x0c813ffe,0xf07d6d00,0x001a0c81,0x3fff8841
-	.long	0x6e000010,0xf20004a2,0xf23a4422,0xf4bc6000
-	.long	0xfe762d6e,0xff88ff94,0x02aefe00,0x0000ff94
-	.long	0x00ae0100,0x0000ff94,0x0c813fff,0x80006c44
-	.long	0xf23a4400,0xf4fc2d7c,0x3fff0000,0xff9042ae
-	.long	0xff98f22e,0x4828ff90,0x222eff94,0x02817e00
-	.long	0x0000e081,0xe081e881,0xf20004a2,0xf227e00c
-	.long	0xf2000422,0x41faf4e2,0xd1c1f23a,0x4480f466
-	.long	0x6000fd76,0xf23a4400,0xf4502d7c,0x3fff0000
-	.long	0xff9042ae,0xff98f22e,0x4828ff90,0x222eff94
-	.long	0x02817e00,0x0000e081,0xe081e881,0xf2000422
-	.long	0xf227e00c,0x41faf4a2,0xd1c1f23a,0x4480f41e
-	.long	0x6000fd36,0x0c810000,0x00006d10,0xf23a4400
-	.long	0xf414f200,0x900060ff,0x00001014,0xf23a4400
-	.long	0xf3fcf200,0x900060ff,0x0000102e,0x60ff0000
-	.long	0x10422210,0x32280004,0x02817fff,0xffff0c81
-	.long	0x3fff8000,0x6c56f210,0x4818f200,0x0080f200
-	.long	0x049af200,0x0022f23c,0x44a23f80,0x0000f200
-	.long	0x04202210,0x02818000,0x00000081,0x3f000000
-	.long	0x2f012f00,0x4280f227,0xe00141d7,0x61ffffff
-	.long	0xfe5adffc,0x0000000c,0x201ff200,0x9000123c
-	.long	0x0000f21f,0x442360ff,0x00001136,0xf2104818
-	.long	0xf23c4438,0x3f800000,0xf2d20000,0x0fac60ff
-	.long	0x00000f7c,0x60ff0000,0x0fba3ffd,0x0000de5b
-	.long	0xd8a93728,0x71950000,0x00003fff,0x0000b8aa
-	.long	0x3b295c17,0xf0bc0000,0x0000f23c,0x58000001
-	.long	0xf2104838,0xf2c10000,0x13502210,0x6d000090
-	.long	0x2f004280,0x61ffffff,0xfba2f21f,0x9000f23a
-	.long	0x4823ffb8,0x60ff0000,0x10d62210,0x6d000070
-	.long	0x2f004280,0x61ffffff,0xfd34f21f,0x9000f23a
-	.long	0x4823ff98,0x60ff0000,0x10c62210,0x6d000050
-	.long	0x22280008,0x662e2228,0x00040281,0x7fffffff
-	.long	0x66223210,0x02810000,0x7fff0481,0x00003fff
-	.long	0x67ff0000,0x12e4f200,0x9000f201,0x400060ff
-	.long	0x0000107c,0x2f004280,0x61ffffff,0xfb2ef21f
-	.long	0x9000f23a,0x4823ff54,0x60ff0000,0x106260ff
-	.long	0x00000ed6,0x22106d00,0xfff62f00,0x428061ff
-	.long	0xfffffcba,0xf21f9000,0xf23a4823,0xff2e60ff
-	.long	0x0000104c,0x406a934f,0x0979a371,0x3f734413
-	.long	0x509f8000,0xbfcd0000,0xc0219dc1,0xda994fd2
-	.long	0x00000000,0x40000000,0x935d8ddd,0xaaa8ac17
-	.long	0x00000000,0x3ffe0000,0xb17217f7,0xd1cf79ac
-	.long	0x00000000,0x3f56c16d,0x6f7bd0b2,0x3f811112
-	.long	0x302c712c,0x3fa55555,0x55554cc1,0x3fc55555
-	.long	0x55554a54,0x3fe00000,0x00000000,0x00000000
-	.long	0x00000000,0x3fff0000,0x80000000,0x00000000
-	.long	0x3f738000,0x3fff0000,0x8164d1f3,0xbc030773
-	.long	0x3fbef7ca,0x3fff0000,0x82cd8698,0xac2ba1d7
-	.long	0x3fbdf8a9,0x3fff0000,0x843a28c3,0xacde4046
-	.long	0x3fbcd7c9,0x3fff0000,0x85aac367,0xcc487b15
-	.long	0xbfbde8da,0x3fff0000,0x871f6196,0x9e8d1010
-	.long	0x3fbde85c,0x3fff0000,0x88980e80,0x92da8527
-	.long	0x3fbebbf1,0x3fff0000,0x8a14d575,0x496efd9a
-	.long	0x3fbb80ca,0x3fff0000,0x8b95c1e3,0xea8bd6e7
-	.long	0xbfba8373,0x3fff0000,0x8d1adf5b,0x7e5ba9e6
-	.long	0xbfbe9670,0x3fff0000,0x8ea4398b,0x45cd53c0
-	.long	0x3fbdb700,0x3fff0000,0x9031dc43,0x1466b1dc
-	.long	0x3fbeeeb0,0x3fff0000,0x91c3d373,0xab11c336
-	.long	0x3fbbfd6d,0x3fff0000,0x935a2b2f,0x13e6e92c
-	.long	0xbfbdb319,0x3fff0000,0x94f4efa8,0xfef70961
-	.long	0x3fbdba2b,0x3fff0000,0x96942d37,0x20185a00
-	.long	0x3fbe91d5,0x3fff0000,0x9837f051,0x8db8a96f
-	.long	0x3fbe8d5a,0x3fff0000,0x99e04593,0x20b7fa65
-	.long	0xbfbcde7b,0x3fff0000,0x9b8d39b9,0xd54e5539
-	.long	0xbfbebaaf,0x3fff0000,0x9d3ed9a7,0x2cffb751
-	.long	0xbfbd86da,0x3fff0000,0x9ef53260,0x91a111ae
-	.long	0xbfbebedd,0x3fff0000,0xa0b0510f,0xb9714fc2
-	.long	0x3fbcc96e,0x3fff0000,0xa2704303,0x0c496819
-	.long	0xbfbec90b,0x3fff0000,0xa43515ae,0x09e6809e
-	.long	0x3fbbd1db,0x3fff0000,0xa5fed6a9,0xb15138ea
-	.long	0x3fbce5eb,0x3fff0000,0xa7cd93b4,0xe965356a
-	.long	0xbfbec274,0x3fff0000,0xa9a15ab4,0xea7c0ef8
-	.long	0x3fbea83c,0x3fff0000,0xab7a39b5,0xa93ed337
-	.long	0x3fbecb00,0x3fff0000,0xad583eea,0x42a14ac6
-	.long	0x3fbe9301,0x3fff0000,0xaf3b78ad,0x690a4375
-	.long	0xbfbd8367,0x3fff0000,0xb123f581,0xd2ac2590
-	.long	0xbfbef05f,0x3fff0000,0xb311c412,0xa9112489
-	.long	0x3fbdfb3c,0x3fff0000,0xb504f333,0xf9de6484
-	.long	0x3fbeb2fb,0x3fff0000,0xb6fd91e3,0x28d17791
-	.long	0x3fbae2cb,0x3fff0000,0xb8fbaf47,0x62fb9ee9
-	.long	0x3fbcdc3c,0x3fff0000,0xbaff5ab2,0x133e45fb
-	.long	0x3fbee9aa,0x3fff0000,0xbd08a39f,0x580c36bf
-	.long	0xbfbeaefd,0x3fff0000,0xbf1799b6,0x7a731083
-	.long	0xbfbcbf51,0x3fff0000,0xc12c4cca,0x66709456
-	.long	0x3fbef88a,0x3fff0000,0xc346ccda,0x24976407
-	.long	0x3fbd83b2,0x3fff0000,0xc5672a11,0x5506dadd
-	.long	0x3fbdf8ab,0x3fff0000,0xc78d74c8,0xabb9b15d
-	.long	0xbfbdfb17,0x3fff0000,0xc9b9bd86,0x6e2f27a3
-	.long	0xbfbefe3c,0x3fff0000,0xcbec14fe,0xf2727c5d
-	.long	0xbfbbb6f8,0x3fff0000,0xce248c15,0x1f8480e4
-	.long	0xbfbcee53,0x3fff0000,0xd06333da,0xef2b2595
-	.long	0xbfbda4ae,0x3fff0000,0xd2a81d91,0xf12ae45a
-	.long	0x3fbc9124,0x3fff0000,0xd4f35aab,0xcfedfa1f
-	.long	0x3fbeb243,0x3fff0000,0xd744fcca,0xd69d6af4
-	.long	0x3fbde69a,0x3fff0000,0xd99d15c2,0x78afd7b6
-	.long	0xbfb8bc61,0x3fff0000,0xdbfbb797,0xdaf23755
-	.long	0x3fbdf610,0x3fff0000,0xde60f482,0x5e0e9124
-	.long	0xbfbd8be1,0x3fff0000,0xe0ccdeec,0x2a94e111
-	.long	0x3fbacb12,0x3fff0000,0xe33f8972,0xbe8a5a51
-	.long	0x3fbb9bfe,0x3fff0000,0xe5b906e7,0x7c8348a8
-	.long	0x3fbcf2f4,0x3fff0000,0xe8396a50,0x3c4bdc68
-	.long	0x3fbef22f,0x3fff0000,0xeac0c6e7,0xdd24392f
-	.long	0xbfbdbf4a,0x3fff0000,0xed4f301e,0xd9942b84
-	.long	0x3fbec01a,0x3fff0000,0xefe4b99b,0xdcdaf5cb
-	.long	0x3fbe8cac,0x3fff0000,0xf281773c,0x59ffb13a
-	.long	0xbfbcbb3f,0x3fff0000,0xf5257d15,0x2486cc2c
-	.long	0x3fbef73a,0x3fff0000,0xf7d0df73,0x0ad13bb9
-	.long	0xbfb8b795,0x3fff0000,0xfa83b2db,0x722a033a
-	.long	0x3fbef84b,0x3fff0000,0xfd3e0c0c,0xf486c175
-	.long	0xbfbef581,0xf210d080,0x22103228,0x0004f22e
-	.long	0x6800ff84,0x02817fff,0xffff0c81,0x3fb98000
-	.long	0x6c046000,0x00880c81,0x400d80c0,0x6f046000
-	.long	0x007cf200,0x0080f23c,0x44a34280,0x0000f22e
-	.long	0x6080ff54,0x2f0243fa,0xfbbcf22e,0x4080ff54
-	.long	0x222eff54,0x24010281,0x0000003f,0xe981d3c1
-	.long	0xec822202,0xe2819481,0x06820000,0x3ffff227
-	.long	0xe00cf23c,0x44a33c80,0x00002d59,0xff842d59
-	.long	0xff882d59,0xff8c3d59,0xff90f200,0x04283d59
-	.long	0xff94426e,0xff9642ae,0xff98d36e,0xff84f23a
-	.long	0x4823fb22,0xd36eff90,0x60000100,0x0c813fff
-	.long	0x80006e12,0xf2009000,0xf23c4422,0x3f800000
-	.long	0x60ff0000,0x0b12222e,0xff840c81,0x00000000
-	.long	0x6d0660ff,0x00000ac8,0x60ff0000,0x0a1af200
-	.long	0x9000f23c,0x44003f80,0x00002210,0x00810080
-	.long	0x0001f201,0x442260ff,0x00000adc,0xf210d080
-	.long	0x22103228,0x0004f22e,0x6800ff84,0x02817fff
-	.long	0xffff0c81,0x3fb98000,0x6c046000,0xff900c81
-	.long	0x400b9b07,0x6f046000,0xff84f200,0x0080f23a
-	.long	0x54a3fa62,0xf22e6080,0xff542f02,0x43fafac6
-	.long	0xf22e4080,0xff54222e,0xff542401,0x02810000
-	.long	0x003fe981,0xd3c1ec82,0x2202e281,0x94810682
-	.long	0x00003fff,0xf227e00c,0xf2000500,0xf23a54a3
-	.long	0xfa2c2d59,0xff84f23a,0x4923fa2a,0x2d59ff88
-	.long	0x2d59ff8c,0xf2000428,0x3d59ff90,0xf2000828
-	.long	0x3d59ff94,0x426eff96,0x42aeff98,0xf23a4823
-	.long	0xfa14d36e,0xff84d36e,0xff90f200,0x0080f200
-	.long	0x04a3f23a,0x5500fa1e,0xf23a5580,0xfa20f200
-	.long	0x0523f200,0x05a3f23a,0x5522fa1a,0xf23a55a2
-	.long	0xfa1cf200,0x0523f200,0x05a3f23a,0x5522fa16
-	.long	0xf20001a3,0xf2000523,0xf2000c22,0xf2000822
-	.long	0xf21fd030,0xf22e4823,0xff84f22e,0x4822ff90
-	.long	0xf22e4822,0xff84f200,0x90003d42,0xff84241f
-	.long	0x2d7c8000,0x0000ff88,0x42aeff8c,0x123c0000
-	.long	0xf22e4823,0xff8460ff,0x00000996,0xf2009000
-	.long	0xf23c4400,0x3f800000,0x22100081,0x00800001
-	.long	0xf2014422,0x60ff0000,0x098e2f01,0xe8082200
-	.long	0x02410003,0x0240000c,0x48403001,0x221f4a01
-	.long	0x671e0c01,0x000a6f12,0x0c01000e,0x6f3c0c01
-	.long	0x002f6f06,0x0c01003f,0x6f6260ff,0x00000baa
-	.long	0x4a00660c,0x41fb0170,0x000000d6,0x60000086
-	.long	0x0c000003,0x670a41fb,0x01700000,0x00d06074
-	.long	0x41fb0170,0x000000d2,0x606a0401,0x000b4a00
-	.long	0x661041fb,0x01700000,0x00cc0c01,0x00026f54
-	.long	0x605a0c00,0x0003670a,0x41fb0170,0x000000f2
-	.long	0x60e841fb,0x01700000,0x012460de,0x04010030
-	.long	0x4a006616,0x41fb0170,0x0000014e,0x0c010001
-	.long	0x6f220c01,0x00076f24,0x601a0c00,0x0003670a
-	.long	0x41fb0170,0x000001f2,0x60e241fb,0x01700000
-	.long	0x02a860d8,0x00ae0000,0x0208ff64,0xc2fc000c
-	.long	0x48404a00,0x6608f230,0xd0801000,0x4e754840
-	.long	0x3d701000,0xff902d70,0x1004ff94,0x2d701008
-	.long	0xff982200,0x428041ee,0xff904268,0x000261ff
-	.long	0x000062c6,0xf210d080,0x4e7551fc,0x40000000
-	.long	0xc90fdaa2,0x2168c235,0x40000000,0xc90fdaa2
-	.long	0x2168c234,0x40000000,0xc90fdaa2,0x2168c235
-	.long	0x3ffd0000,0x9a209a84,0xfbcff798,0x40000000
-	.long	0xadf85458,0xa2bb4a9a,0x3fff0000,0xb8aa3b29
-	.long	0x5c17f0bc,0x3ffd0000,0xde5bd8a9,0x37287195
-	.long	0x00000000,0x00000000,0x00000000,0x3ffd0000
-	.long	0x9a209a84,0xfbcff798,0x40000000,0xadf85458
-	.long	0xa2bb4a9a,0x3fff0000,0xb8aa3b29,0x5c17f0bb
-	.long	0x3ffd0000,0xde5bd8a9,0x37287195,0x00000000
-	.long	0x00000000,0x00000000,0x3ffd0000,0x9a209a84
-	.long	0xfbcff799,0x40000000,0xadf85458,0xa2bb4a9b
-	.long	0x3fff0000,0xb8aa3b29,0x5c17f0bc,0x3ffd0000
-	.long	0xde5bd8a9,0x37287195,0x00000000,0x00000000
-	.long	0x00000000,0x3ffe0000,0xb17217f7,0xd1cf79ac
-	.long	0x40000000,0x935d8ddd,0xaaa8ac17,0x3fff0000
-	.long	0x80000000,0x00000000,0x40020000,0xa0000000
-	.long	0x00000000,0x40050000,0xc8000000,0x00000000
-	.long	0x400c0000,0x9c400000,0x00000000,0x40190000
-	.long	0xbebc2000,0x00000000,0x40340000,0x8e1bc9bf
-	.long	0x04000000,0x40690000,0x9dc5ada8,0x2b70b59e
-	.long	0x40d30000,0xc2781f49,0xffcfa6d5,0x41a80000
-	.long	0x93ba47c9,0x80e98ce0,0x43510000,0xaa7eebfb
-	.long	0x9df9de8e,0x46a30000,0xe319a0ae,0xa60e91c7
-	.long	0x4d480000,0xc9767586,0x81750c17,0x5a920000
-	.long	0x9e8b3b5d,0xc53d5de5,0x75250000,0xc4605202
-	.long	0x8a20979b,0x3ffe0000,0xb17217f7,0xd1cf79ab
-	.long	0x40000000,0x935d8ddd,0xaaa8ac16,0x3fff0000
-	.long	0x80000000,0x00000000,0x40020000,0xa0000000
-	.long	0x00000000,0x40050000,0xc8000000,0x00000000
-	.long	0x400c0000,0x9c400000,0x00000000,0x40190000
-	.long	0xbebc2000,0x00000000,0x40340000,0x8e1bc9bf
-	.long	0x04000000,0x40690000,0x9dc5ada8,0x2b70b59d
-	.long	0x40d30000,0xc2781f49,0xffcfa6d5,0x41a80000
-	.long	0x93ba47c9,0x80e98cdf,0x43510000,0xaa7eebfb
-	.long	0x9df9de8d,0x46a30000,0xe319a0ae,0xa60e91c6
-	.long	0x4d480000,0xc9767586,0x81750c17,0x5a920000
-	.long	0x9e8b3b5d,0xc53d5de4,0x75250000,0xc4605202
-	.long	0x8a20979a,0x3ffe0000,0xb17217f7,0xd1cf79ac
-	.long	0x40000000,0x935d8ddd,0xaaa8ac17,0x3fff0000
-	.long	0x80000000,0x00000000,0x40020000,0xa0000000
-	.long	0x00000000,0x40050000,0xc8000000,0x00000000
-	.long	0x400c0000,0x9c400000,0x00000000,0x40190000
-	.long	0xbebc2000,0x00000000,0x40340000,0x8e1bc9bf
-	.long	0x04000000,0x40690000,0x9dc5ada8,0x2b70b59e
-	.long	0x40d30000,0xc2781f49,0xffcfa6d6,0x41a80000
-	.long	0x93ba47c9,0x80e98ce0,0x43510000,0xaa7eebfb
-	.long	0x9df9de8e,0x46a30000,0xe319a0ae,0xa60e91c7
-	.long	0x4d480000,0xc9767586,0x81750c18,0x5a920000
-	.long	0x9e8b3b5d,0xc53d5de5,0x75250000,0xc4605202
-	.long	0x8a20979b,0x2f003229,0x00005bee,0xff540281
-	.long	0x00007fff,0x30280000,0x02407fff,0x0c403fff
-	.long	0x6d0000c0,0x0c40400c,0x6e0000a4,0xf2284803
-	.long	0x0000f200,0x6000f23c,0x88000000,0x00004a29
-	.long	0x00046b5e,0x2f003d69,0x0000ff84,0x2d690004
-	.long	0xff882d69,0x0008ff8c,0x41eeff84,0x61ff0000
-	.long	0x60ba4480,0xd09ff22e,0xd080ff84,0x0c40c001
-	.long	0x6c36f21f,0x9000223c,0x80000000,0x0480ffff
-	.long	0xc0014480,0x0c000020,0x6c0ae0a9,0x42a72f01
-	.long	0x42a76028,0x04000020,0xe0a92f01,0x42a742a7
-	.long	0x601af229,0xd0800000,0xf21f9000,0x06403fff
-	.long	0x484042a7,0x2f3c8000,0x00002f00,0xf200b000
-	.long	0x123c0000,0xf21f4823,0x60ff0000,0x04ce201f
-	.long	0xc1494a29,0x00006bff,0x0000038c,0x60ff0000
-	.long	0x03c44a29,0x00046a16,0x201ff200,0x9000123c
-	.long	0x0003f229,0x48000000,0x60ff0000,0x049e201f
-	.long	0x204960ff,0x000002e2,0x00010000,0x80000000
-	.long	0x00000000,0x00000000,0x422eff65,0x2f00422e
-	.long	0xff5c600c,0x422eff65,0x2f001d7c,0x0001ff5c
-	.long	0x48e73f00,0x36280000,0x3d43ff58,0x02830000
-	.long	0x7fff2828,0x00042a28,0x00084a83,0x663c263c
-	.long	0x00003ffe,0x4a846616,0x28054285,0x04830000
-	.long	0x00204286,0xedc46000,0xedac9686,0x60224286
-	.long	0xedc46000,0x9686edac,0x2e05edad,0x44860686
-	.long	0x00000020,0xecaf8887,0x60060683,0x00003ffe
-	.long	0x30290000,0x3d40ff5a,0x322eff58,0xb1810281
-	.long	0x00008000,0x3d41ff5e,0x02800000,0x7fff2229
-	.long	0x00042429,0x00084a80,0x663c203c,0x00003ffe
-	.long	0x4a816616,0x22024282,0x04800000,0x00204286
-	.long	0xedc16000,0xeda99086,0x60224286,0xedc16000
-	.long	0x9086eda9,0x2e02edaa,0x44860686,0x00000020
-	.long	0xecaf8287,0x60060680,0x00003ffe,0x2d43ff54
-	.long	0x2f009083,0x42864283,0x227c0000,0x00004a80
-	.long	0x6c06201f,0x6000006a,0x588f4a86,0x6e0eb284
-	.long	0x6608b485,0x66046000,0x01366508,0x94859384
-	.long	0x42865283,0x4a80670e,0xd683d482,0xe39155c6
-	.long	0x52895380,0x60d4202e,0xff544a81,0x66162202
-	.long	0x42820480,0x00000020,0x4286edc1,0x6000eda9
-	.long	0x9086601c,0x4286edc1,0x60006b14,0x9086eda9
-	.long	0x2e02edaa,0x44860686,0x00000020,0xecaf8287
-	.long	0x0c800000,0x41fe6c2a,0x3d40ff90,0x2d41ff94
-	.long	0x2d42ff98,0x2c2eff54,0x3d46ff84,0x2d44ff88
-	.long	0x2d45ff8c,0xf22e4800,0xff901d7c,0x0001ff5d
-	.long	0x60362d41,0xff942d42,0xff980480,0x00003ffe
-	.long	0x3d40ff90,0x2c2eff54,0x04860000,0x3ffe2d46
-	.long	0xff54f22e,0x4800ff90,0x3d46ff84,0x2d44ff88
-	.long	0x2d45ff8c,0x422eff5d,0x4a2eff5c,0x67222c2e
-	.long	0xff545386,0xb0866d18,0x6e0eb284,0x6608b485
-	.long	0x66046000,0x007a6508,0xf22e4828,0xff845283
-	.long	0x3c2eff5a,0x6c04f200,0x001a4286,0x3c2eff5e
-	.long	0x7e08eeae,0x02830000,0x007f8686,0x1d43ff65
-	.long	0x4cdf00fc,0x201ff200,0x90004a2e,0xff5d6710
-	.long	0x123c0000,0xf23a4823,0xfdc060ff,0x0000024c
-	.long	0x123c0003,0xf2000000,0x60ff0000,0x023e5283
-	.long	0x0c800000,0x00086c04,0xe1ab6002,0x4283f23c
-	.long	0x44000000,0x0000422e,0xff5d6000,0xff942c03
-	.long	0x02860000,0x00014a86,0x6700ff86,0x52833c2e
-	.long	0xff5a0a86,0x00008000,0x3d46ff5a,0x6000ff72
-	.long	0x7fff0000,0xffffffff,0xffffffff,0x4a280000
-	.long	0x6b12f23c,0x44007f80,0x000000ae,0x02000410
-	.long	0xff644e75,0xf23c4400,0xff800000,0x00ae0a00
-	.long	0x0410ff64,0x4e7500ae,0x01002080,0xff64f23a
-	.long	0xd080ffbe,0x4e7500ae,0x00000800,0xff646008
-	.long	0x00ae0000,0x0a28ff64,0x22482200,0x020100c0
-	.long	0x660e4a28,0x00006a18,0x08ee0003,0xff646010
-	.long	0x2f094a28,0x00005bc1,0x61ff0000,0x0196225f
-	.long	0xf210d080,0x102eff62,0x0200000a,0x66024e75
-	.long	0x3d690000,0xff842d69,0x0004ff88,0x2d690008
-	.long	0xff8c41ee,0xff8461ff,0x00005cd0,0x06800000
-	.long	0x6000026e,0x8000ff84,0x816eff84,0xf22ed040
-	.long	0xff844e75,0x00ae0000,0x0a28ff64,0x4a105bc1
-	.long	0x61ff0000,0x013ef210,0xd080f23c,0x44800000
-	.long	0x00004e75,0x00ae0000,0x0a28ff64,0x51c161ff
-	.long	0x00000120,0xf210d080,0xf23c4480,0x00000000
-	.long	0x4e7500ae,0x00001048,0xff641200,0x020100c0
-	.long	0x675c4a28,0x00046b24,0x3d680000,0xff842d68
-	.long	0x0004ff88,0x2d680008,0xff8c41ee,0xff8448e7
-	.long	0xc08061ff,0x00005c44,0x4cdf0103,0x0c010040
-	.long	0x660e4aa8,0x00086614,0x4a280007,0x660e601e
-	.long	0x22280008,0x02810000,0x07ff6712,0x00ae0000
-	.long	0x0200ff64,0x600800ae,0x00001248,0xff644a28
-	.long	0x00005bc1,0x61ff0000,0x5f261d40,0xff64f210
-	.long	0xd080f23c,0x44800000,0x00004e75,0x00ae0000
-	.long	0x1248ff64,0x51c161ff,0x00005f04,0x1d40ff64
-	.long	0xf210d080,0xf23c4480,0x00000000,0x4e75f327
-	.long	0x4a2f0002,0x6b2edffc,0x0000000c,0xf294000e
-	.long	0xf2810014,0x006e0208,0xff664e75,0x00ae0800
-	.long	0x0208ff64,0x4e751d7c,0x0004ff64,0x006e0208
-	.long	0xff664e75,0x006e0208,0xff6661ff,0x00000bae
-	.long	0xdffc0000,0x000c4e75,0xf3274a2f,0x00026bea
-	.long	0xdffc0000,0x000cf200,0xa80081ae,0xff644e75
-	.long	0x00ae0000,0x0a28ff64,0x02410010,0xe8080200
-	.long	0x000f8001,0x2200e309,0x1d7b000a,0xff6441fb
-	.long	0x16204e75,0x04040400,0x04040400,0x04040400
-	.long	0x00000000,0x0c0c080c,0x0c0c080c,0x0c0c080c
-	.long	0x00000000,0x00000000,0x00000000,0x00000000
-	.long	0x00000000,0x00000000,0x00000000,0x00000000
-	.long	0x00000000,0x00000000,0x00000000,0x00000000
-	.long	0x00000000,0x00000000,0x00000001,0x00000000
-	.long	0x3f810000,0x00000000,0x00000000,0x00000000
-	.long	0x3f810000,0x00000000,0x00000000,0x00000000
-	.long	0x3f810000,0x00000000,0x00000000,0x00000000
-	.long	0x3f810000,0x00000100,0x00000000,0x00000000
-	.long	0x3c010000,0x00000000,0x00000000,0x00000000
-	.long	0x3c010000,0x00000000,0x00000000,0x00000000
-	.long	0x3c010000,0x00000000,0x00000000,0x00000000
-	.long	0x3c010000,0x00000000,0x00000800,0x00000000
-	.long	0x00000000,0x00000000,0x00000000,0x00000000
-	.long	0x00000000,0x00000000,0x00000000,0x00000000
-	.long	0x00000000,0x00000000,0x00000000,0x00000000
-	.long	0x00000000,0x00000000,0x00000000,0x00000000
-	.long	0x80000000,0x00000000,0x00000000,0x00000000
-	.long	0x80000000,0x00000000,0x00000000,0x00000000
-	.long	0x80000000,0x00000000,0x00000001,0x00000000
-	.long	0x80000000,0x00000000,0x00000000,0x00000000
-	.long	0xbf810000,0x00000000,0x00000000,0x00000000
-	.long	0xbf810000,0x00000000,0x00000000,0x00000000
-	.long	0xbf810000,0x00000100,0x00000000,0x00000000
-	.long	0xbf810000,0x00000000,0x00000000,0x00000000
-	.long	0xbc010000,0x00000000,0x00000000,0x00000000
-	.long	0xbc010000,0x00000000,0x00000000,0x00000000
-	.long	0xbc010000,0x00000000,0x00000800,0x00000000
-	.long	0xbc010000,0x00000000,0x00000000,0x00000000
-	.long	0x4a280000,0x6b10f23c,0x44000000,0x00001d7c
-	.long	0x0004ff64,0x4e75f23c,0x44008000,0x00001d7c
-	.long	0x000cff64,0x4e754a29,0x00006bea,0x60d84a28
-	.long	0x00006b10,0xf23c4400,0x7f800000,0x1d7c0002
-	.long	0xff644e75,0xf23c4400,0xff800000,0x1d7c000a
-	.long	0xff644e75,0x4a290000,0x6bea60d8,0x4a280000
-	.long	0x6ba460d0,0x4a280000,0x6b00fbbc,0x60c64a28
-	.long	0x00006b16,0x60be4a28,0x00006b0e,0xf23c4400
-	.long	0x3f800000,0x422eff64,0x4e75f23c,0x4400bf80
-	.long	0x00001d7c,0x0008ff64,0x4e753fff,0x0000c90f
-	.long	0xdaa22168,0xc235bfff,0x0000c90f,0xdaa22168
-	.long	0xc2354a28,0x00006b0e,0xf2009000,0xf23a4800
-	.long	0xffda6000,0xfcf0f200,0x9000f23a,0x4800ffd8
-	.long	0x6000fcea,0xf23c4480,0x3f800000,0x4a280000
-	.long	0x6a10f23c,0x44008000,0x00001d7c,0x000cff64
-	.long	0x6040f23c,0x44000000,0x00001d7c,0x0004ff64
-	.long	0x6030f23a,0x4880faea,0x61ff0000,0x00286000
-	.long	0xfb16f228,0x48800000,0x61ff0000,0x00186000
-	.long	0x030ef228,0x48800000,0x61ff0000,0x00086000
-	.long	0x02ee102e,0xff430240,0x0007303b,0x02064efb
-	.long	0x00020010,0x00180020,0x0026002c,0x00320038
-	.long	0x003ef22e,0xf040ffdc,0x4e75f22e,0xf040ffe8
-	.long	0x4e75f200,0x05004e75,0xf2000580,0x4e75f200
-	.long	0x06004e75,0xf2000680,0x4e75f200,0x07004e75
-	.long	0xf2000780,0x4e75122e,0xff4f67ff,0xfffff7dc
-	.long	0x0c010001,0x67000096,0x0c010002,0x67ffffff
-	.long	0xfa880c01,0x000467ff,0xfffff7c0,0x0c010005
-	.long	0x67ff0000,0x024060ff,0x0000024a,0x122eff4f
-	.long	0x67ffffff,0xfa640c01,0x000167ff,0xfffffa5a
-	.long	0x0c010002,0x67ffffff,0xfa500c01,0x000467ff
-	.long	0xfffffa46,0x0c010003,0x67ff0000,0x021860ff
-	.long	0x00000202,0x122eff4f,0x67ff0000,0x004e0c01
-	.long	0x000167ff,0x00000028,0x0c010002,0x67ffffff
-	.long	0xfa180c01,0x000467ff,0x00000030,0x0c010003
-	.long	0x67ff0000,0x01e060ff,0x000001ca,0x12280000
-	.long	0x10290000,0xb1010201,0x00801d41,0xff654a00
-	.long	0x6a00fdc4,0x6000fdd0,0x422eff65,0x2f001228
-	.long	0x00001029,0x0000b101,0x02010080,0x1d41ff65
-	.long	0x0c2e0004,0xff4f660c,0x41e90000,0x201f60ff
-	.long	0xfffff9c6,0xf21f9000,0xf2294800,0x00004a29
-	.long	0x00006b02,0x4e751d7c,0x0008ff64,0x4e75122e
-	.long	0xff4f67ff,0xfffff6e0,0x0c010001,0x6700ff8e
-	.long	0x0c010002,0x67ffffff,0xf9800c01,0x000467ff
-	.long	0xfffff6c4,0x0c010003,0x67ff0000,0x014860ff
-	.long	0x00000132,0x122eff4f,0x67ffffff,0xf95c0c01
-	.long	0x000167ff,0xfffff952,0x0c010002,0x67ffffff
-	.long	0xf9480c01,0x000467ff,0xfffff93e,0x0c010003
-	.long	0x67ff0000,0x011060ff,0x000000fa,0x122eff4f
-	.long	0x6700ff46,0x0c010001,0x6700ff22,0x0c010002
-	.long	0x67ffffff,0xf9140c01,0x000467ff,0xffffff2c
-	.long	0x0c010003,0x67ff0000,0x00dc60ff,0x000000c6
-	.long	0x122eff4f,0x67ffffff,0xf51e0c01,0x000167ff
-	.long	0xfffffce6,0x0c010002,0x67ffffff,0xfd0a0c01
-	.long	0x000467ff,0xfffff500,0x0c010003,0x67ff0000
-	.long	0x00a460ff,0x0000008e,0x122eff4f,0x67ffffff
-	.long	0xf4e60c01,0x000167ff,0xfffffcae,0x0c010002
-	.long	0x67ffffff,0xfcd20c01,0x000467ff,0xfffff4c8
-	.long	0x0c010003,0x67ff0000,0x006c60ff,0x00000056
-	.long	0x122eff4f,0x67ffffff,0xf8800c01,0x000367ff
-	.long	0x00000052,0x0c010005,0x67ff0000,0x003860ff
-	.long	0xfffff866,0x122eff4f,0x0c010003,0x67340c01
-	.long	0x0005671e,0x6058122e,0xff4f0c01,0x00036708
-	.long	0x0c010005,0x670c6036,0x00ae0100,0x4080ff64
-	.long	0x6010f229,0x48000000,0xf200a800,0x81aeff64
-	.long	0x4e75f229,0x48000000,0x4a290000,0x6b081d7c
-	.long	0x0001ff64,0x4e751d7c,0x0009ff64,0x4e75f228
-	.long	0x48000000,0xf200a800,0x81aeff64,0x4e75f228
-	.long	0x48000000,0x4a280000,0x6bdc1d7c,0x0001ff64
-	.long	0x4e751d7c,0x0009ff64,0x4e75122e,0xff4e67ff
-	.long	0xffffd936,0x0c010001,0x67ffffff,0xfba60c01
-	.long	0x000267ff,0xfffffbca,0x0c010004,0x67ffffff
-	.long	0xd9f60c01,0x000367ff,0xffffffb6,0x60ffffff
-	.long	0xffa0122e,0xff4e67ff,0xffffe620,0x0c010001
-	.long	0x67ffffff,0xfb6e0c01,0x000267ff,0xfffffbc8
-	.long	0x0c010004,0x67ffffff,0xe7560c01,0x000367ff
-	.long	0xffffff7e,0x60ffffff,0xff68122e,0xff4e67ff
-	.long	0xffffd4d2,0x0c010001,0x67ffffff,0xfb360c01
-	.long	0x000267ff,0xfffffb9a,0x0c010004,0x67ffffff
-	.long	0xd76a0c01,0x000367ff,0xffffff46,0x60ffffff
-	.long	0xff30122e,0xff4e67ff,0xffffd972,0x0c010001
-	.long	0x67ffffff,0xfafe0c01,0x000267ff,0xfffffb6a
-	.long	0x0c010004,0x67ffffff,0xdabc0c01,0x000367ff
-	.long	0xffffff0e,0x60ffffff,0xfef8122e,0xff4e67ff
-	.long	0xffffca6a,0x0c010001,0x67ffffff,0xfac60c01
-	.long	0x000267ff,0xfffffb6e,0x0c010004,0x67ffffff
-	.long	0xcc8a0c01,0x000367ff,0xfffffed6,0x60ffffff
-	.long	0xfec0122e,0xff4e67ff,0xffffcc76,0x0c010001
-	.long	0x67ffffff,0xfa8e0c01,0x000267ff,0xfffff6aa
-	.long	0x0c010004,0x67ffffff,0xcd060c01,0x000367ff
-	.long	0xfffffe9e,0x60ffffff,0xfe88122e,0xff4e67ff
-	.long	0xffffe662,0x0c010001,0x67ffffff,0xfa560c01
-	.long	0x000267ff,0xfffff672,0x0c010004,0x67ffffff
-	.long	0xe6c60c01,0x000367ff,0xfffffe66,0x60ffffff
-	.long	0xfe50122e,0xff4e67ff,0xffffb372,0x0c010001
-	.long	0x67ffffff,0xfa1e0c01,0x000267ff,0xfffff63a
-	.long	0x0c010004,0x67ffffff,0xb5380c01,0x000367ff
-	.long	0xfffffe2e,0x60ffffff,0xfe18122e,0xff4e67ff
-	.long	0xffffbdfc,0x0c010001,0x67ffffff,0xf9e60c01
-	.long	0x000267ff,0xfffff602,0x0c010004,0x67ffffff
-	.long	0xbf420c01,0x000367ff,0xfffffdf6,0x60ffffff
-	.long	0xfde0122e,0xff4e67ff,0xffffd17a,0x0c010001
-	.long	0x67ffffff,0xfa2a0c01,0x000267ff,0xfffffa00
-	.long	0x0c010004,0x67ffffff,0xd3080c01,0x000367ff
-	.long	0xfffffdbe,0x60ffffff,0xfda8122e,0xff4e67ff
-	.long	0xffffeb64,0x0c010001,0x67ffffff,0xf9f20c01
-	.long	0x000267ff,0xfffff9c8,0x0c010004,0x67ffffff
-	.long	0xec200c01,0x000367ff,0xfffffd86,0x60ffffff
-	.long	0xfd70122e,0xff4e67ff,0xffffec24,0x0c010001
-	.long	0x67ffffff,0xf9ba0c01,0x000267ff,0xfffff990
-	.long	0x0c010004,0x67ffffff,0xed360c01,0x000367ff
-	.long	0xfffffd4e,0x60ffffff,0xfd38122e,0xff4e67ff
-	.long	0xffffe178,0x0c010001,0x67ffffff,0xf51a0c01
-	.long	0x000267ff,0xfffff960,0x0c010004,0x67ffffff
-	.long	0xe30c0c01,0x000367ff,0xfffffd16,0x60ffffff
-	.long	0xfd00122e,0xff4e67ff,0xffffe582,0x0c010001
-	.long	0x67ffffff,0xf4e20c01,0x000267ff,0xfffff928
-	.long	0x0c010004,0x67ffffff,0xe5940c01,0x000367ff
-	.long	0xfffffcde,0x60ffffff,0xfcc8122e,0xff4e67ff
-	.long	0xffffe59a,0x0c010001,0x67ffffff,0xf4aa0c01
-	.long	0x000267ff,0xfffff8f0,0x0c010004,0x67ffffff
-	.long	0xe5d60c01,0x000367ff,0xfffffca6,0x60ffffff
-	.long	0xfc90122e,0xff4e67ff,0xffffd530,0x0c010001
-	.long	0x67ffffff,0xf8da0c01,0x000267ff,0xfffff888
-	.long	0x0c010004,0x67ffffff,0xd5b60c01,0x000367ff
-	.long	0xfffffc6e,0x60ffffff,0xfc58122e,0xff4e67ff
-	.long	0xffffcac2,0x0c010001,0x67ffffff,0xf8de0c01
-	.long	0x000267ff,0xfffff442,0x0c010004,0x67ffffff
-	.long	0xcb340c01,0x000367ff,0xfffffc36,0x60ffffff
-	.long	0xfc20122e,0xff4e67ff,0xffffb14c,0x0c010001
-	.long	0x67ffffff,0xf86a0c01,0x000267ff,0xfffff40a
-	.long	0x0c010004,0x67ffffff,0xb30e0c01,0x000367ff
-	.long	0xfffffbfe,0x60ffffff,0xfbe8122e,0xff4e67ff
-	.long	0xffffd40e,0x0c010001,0x67ffffff,0xf7b60c01
-	.long	0x000267ff,0xfffff3d2,0x0c010004,0x67ffffff
-	.long	0xd40c0c01,0x000367ff,0xfffffbc6,0x60ffffff
-	.long	0xfbb0122e,0xff4e67ff,0xffffd40a,0x0c010001
-	.long	0x67ffffff,0xf77e0c01,0x000267ff,0xfffff39a
-	.long	0x0c010004,0x67ffffff,0xd41a0c01,0x000367ff
-	.long	0xfffffb8e,0x60ffffff,0xfb78122e,0xff4e67ff
-	.long	0xffffb292,0x0c010001,0x67ffffff,0xf81a0c01
-	.long	0x000267ff,0xfffff83e,0x0c010004,0x67ffffff
-	.long	0xb50a0c01,0x000367ff,0xfffff83a,0x60ffffff
-	.long	0xf844122e,0xff4e67ff,0xfffff89e,0x0c010001
-	.long	0x67ffffff,0xf8ca0c01,0x000267ff,0xfffff8f8
-	.long	0x0c010004,0x67ffffff,0xf8800c01,0x000367ff
-	.long	0xfffffab4,0x60ffffff,0xfac0122e,0xff4e67ff
-	.long	0xfffff96e,0x0c010001,0x67ffffff,0xf99a0c01
-	.long	0x000267ff,0xfffff9c8,0x0c010004,0x67ffffff
-	.long	0xf9500c01,0x000367ff,0xfffffa7c,0x60ffffff
-	.long	0xfa88122e,0xff4e67ff,0xfffff9d8,0x0c010001
-	.long	0x67ffffff,0xfa060c01,0x000267ff,0xfffffa34
-	.long	0x0c010004,0x67ffffff,0xf9ba0c01,0x000367ff
-	.long	0xfffffa44,0x60ffffff,0xfa500c2f,0x00070003
-	.long	0x673e1d7c,0x0000ff4e,0x1d7c0000,0xff4ff22e
-	.long	0xf080ff78,0x41ef0004,0x43eeff78,0x0c010003
-	.long	0x67160c01,0x00026708,0x61ff0000,0x02004e75
-	.long	0x61ff0000,0x1b9e4e75,0x61ff0000,0x05e44e75
-	.long	0x1d7c0004,0xff4e60c0,0x4afc006d,0x000005d2
-	.long	0x00000fc8,0xfffffa6e,0x0000106c,0x00002314
-	.long	0x00000000,0xfffffaa6,0x00000000,0xfffffade
-	.long	0xfffffb16,0xfffffb4e,0x00000000,0xfffffb86
-	.long	0xfffffbbe,0xfffffbf6,0xfffffc2e,0xfffffc66
-	.long	0xfffffc9e,0xfffffcd6,0x00000000,0xfffffd0e
-	.long	0xfffffd46,0xfffffd7e,0x00000000,0x00001112
-	.long	0xfffffdb6,0x00000ca8,0x00000000,0xfffffdee
-	.long	0xfffffe26,0xfffffe5e,0xfffffe96,0x0000089e
-	.long	0xffffff06,0x00001b84,0x000001de,0x00001854
-	.long	0xffffff3e,0xffffff76,0x00001512,0x00001f4c
-	.long	0x00000000,0x00000000,0x00000000,0x00000000
-	.long	0x00000000,0x00000000,0x00000000,0xfffffece
-	.long	0xfffffece,0xfffffece,0xfffffece,0xfffffece
-	.long	0xfffffece,0xfffffece,0xfffffece,0x000013b0
-	.long	0x00000000,0x00000f56,0x00000000,0x00000000
-	.long	0x00000000,0x00000000,0x00000000,0x000005c0
-	.long	0x00002302,0x00000000,0x00000000,0x000005ca
-	.long	0x0000230c,0x00000000,0x00000000,0x00000000
-	.long	0x00000000,0x00000000,0x00000000,0x00000000
-	.long	0x00000000,0x00000000,0x00000000,0x00000000
-	.long	0x00000000,0x00000000,0x00000000,0x00000000
-	.long	0x00000000,0x00000000,0x00000000,0x00001100
-	.long	0x00000000,0x00000c96,0x00000000,0x0000110a
-	.long	0x00000000,0x00000ca0,0x00000000,0x0000088c
-	.long	0x00000000,0x00001b72,0x000001cc,0x00000896
-	.long	0x00000000,0x00001b7c,0x000001d6,0x00001f3a
-	.long	0x00000000,0x00000000,0x00000000,0x00001f44
-	.long	0xffffc001,0xffffff81,0xfffffc01,0x00004000
-	.long	0x0000007f,0x000003ff,0x02000030,0x00000040
-	.long	0x60080200,0x00300000,0x00802d40,0xff5c4241
-	.long	0x122eff4f,0xe709822e,0xff4e6600,0x02e43d69
-	.long	0x0000ff90,0x2d690004,0xff942d69,0x0008ff98
-	.long	0x3d680000,0xff842d68,0x0004ff88,0x2d680008
-	.long	0xff8c61ff,0x000024ce,0x2f0061ff,0x00002572
-	.long	0xd197322e,0xff5eec09,0x201fb0bb,0x14846700
-	.long	0x011e6d00,0x0062b0bb,0x14846700,0x021a6e00
-	.long	0x014af22e,0xd080ff90,0xf22e9000,0xff5cf23c
-	.long	0x88000000,0x0000f22e,0x4823ff84,0xf201a800
-	.long	0xf23c9000,0x00000000,0x83aeff64,0xf22ef080
-	.long	0xff842f02,0x322eff84,0x24010281,0x00007fff
-	.long	0x02428000,0x92808242,0x3d41ff84,0x241ff22e
-	.long	0xd080ff84,0x4e75f22e,0xd080ff90,0xf22e9000
-	.long	0xff5cf23c,0x88000000,0x0000f22e,0x4823ff84
-	.long	0xf201a800,0xf23c9000,0x00000000,0x83aeff64
-	.long	0x00ae0000,0x1048ff64,0x122eff62,0x02010013
-	.long	0x661c082e,0x0003ff64,0x56c1202e,0xff5c61ff
-	.long	0x00004fcc,0x812eff64,0xf210d080,0x4e75222e
-	.long	0xff5c0201,0x00c06634,0xf22ef080,0xff842f02
-	.long	0x322eff84,0x34010281,0x00007fff,0x92800481
-	.long	0x00006000,0x02417fff,0x02428000,0x82423d41
-	.long	0xff84241f,0xf22ed040,0xff8460a6,0xf22ed080
-	.long	0xff90222e,0xff5c0201,0x0030f201,0x9000f22e
-	.long	0x4823ff84,0xf23c9000,0x00000000,0x60aaf22e
-	.long	0xd080ff90,0xf22e9000,0xff5cf23c,0x88000000
-	.long	0x0000f22e,0x4823ff84,0xf201a800,0xf23c9000
-	.long	0x00000000,0x83aeff64,0xf2000098,0xf23c58b8
-	.long	0x0002f293,0xff3c6000,0xfee408ee,0x0003ff66
-	.long	0xf22ed080,0xff90f23c,0x90000000,0x0010f23c
-	.long	0x88000000,0x0000f22e,0x4823ff84,0xf201a800
-	.long	0xf23c9000,0x00000000,0x83aeff64,0x122eff62
-	.long	0x0201000b,0x6620f22e,0xf080ff84,0x41eeff84
-	.long	0x222eff5c,0x61ff0000,0x4dd8812e,0xff64f22e
-	.long	0xd080ff84,0x4e75f22e,0xd040ff90,0x222eff5c
-	.long	0x020100c0,0x6652f22e,0x9000ff5c,0xf23c8800
-	.long	0x00000000,0xf22e48a3,0xff84f23c,0x90000000
-	.long	0x0000f22e,0xf040ff84,0x2f02322e,0xff842401
-	.long	0x02810000,0x7fff0242,0x80009280,0x06810000
-	.long	0x60000241,0x7fff8242,0x3d41ff84,0x241ff22e
-	.long	0xd040ff84,0x6000ff80,0x222eff5c,0x02010030
-	.long	0xf2019000,0x60a6f22e,0xd080ff90,0xf22e9000
-	.long	0xff5cf23c,0x88000000,0x0000f22e,0x4823ff84
-	.long	0xf201a800,0xf23c9000,0x00000000,0x83aeff64
-	.long	0xf2000098,0xf23c58b8,0x0002f292,0xfde0f294
-	.long	0xfefaf22e,0xd040ff90,0x222eff5c,0x020100c0
-	.long	0x00010010,0xf2019000,0xf23c8800,0x00000000
-	.long	0xf22e48a3,0xff84f23c,0x90000000,0x0000f200
-	.long	0x0498f23c,0x58b80002,0xf293fda2,0x6000febc
-	.long	0x323b120a,0x4efb1006,0x4afc0030,0xfd120072
-	.long	0x00cc006c,0xfd120066,0x00000000,0x00720072
-	.long	0x0060006c,0x00720066,0x00000000,0x009e0060
-	.long	0x009e006c,0x009e0066,0x00000000,0x006c006c
-	.long	0x006c006c,0x006c0066,0x00000000,0xfd120072
-	.long	0x00cc006c,0xfd120066,0x00000000,0x00660066
-	.long	0x00660066,0x00660066,0x00000000,0x60ff0000
-	.long	0x230e60ff,0x00002284,0x60ff0000,0x227e1028
-	.long	0x00001229,0x0000b101,0x6a10f23c,0x44008000
-	.long	0x00001d7c,0x000cff64,0x4e75f23c,0x44000000
-	.long	0x00001d7c,0x0004ff64,0x4e75f229,0xd0800000
-	.long	0x10280000,0x12290000,0xb1016a10,0xf2000018
-	.long	0xf200001a,0x1d7c000a,0xff644e75,0xf2000018
-	.long	0x1d7c0002,0xff644e75,0xf228d080,0x00001028
-	.long	0x00001229,0x0000b101,0x6ae260d0,0x02000030
-	.long	0x00000040,0x60080200,0x00300000,0x00802d40
-	.long	0xff5c122e,0xff4e6600,0x02620200,0x00c06600
-	.long	0x007c4a28,0x00006a06,0x08ee0003,0xff64f228
-	.long	0xd0800000,0x4e750200,0x00c06600,0x006008ee
-	.long	0x0003ff66,0x4a280000,0x6a0608ee,0x0003ff64
-	.long	0xf228d080,0x0000082e,0x0003ff62,0x66024e75
-	.long	0x3d680000,0xff842d68,0x0004ff88,0x2d680008
-	.long	0xff8c41ee,0xff8461ff,0x00004950,0x44400640
-	.long	0x6000322e,0xff840241,0x80000240,0x7fff8041
-	.long	0x3d40ff84,0xf22ed040,0xff844e75,0x0c000040
-	.long	0x667e3d68,0x0000ff84,0x2d680004,0xff882d68
-	.long	0x0008ff8c,0x61ff0000,0x206c0c80,0x0000007f
-	.long	0x6c000092,0x0c80ffff,0xff816700,0x01786d00
-	.long	0x00f4f23c,0x88000000,0x0000f22e,0x9000ff5c
-	.long	0xf22e4800,0xff84f201,0xa800f23c,0x90000000
-	.long	0x000083ae,0xff642f02,0xf22ef080,0xff84322e
-	.long	0xff843401,0x02810000,0x7fff9280,0x02428000
-	.long	0x84413d42,0xff84241f,0xf22ed080,0xff844e75
-	.long	0x3d680000,0xff842d68,0x0004ff88,0x2d680008
-	.long	0xff8c61ff,0x00001fee,0x0c800000,0x03ff6c00
-	.long	0x00140c80,0xfffffc01,0x670000fa,0x6d000076
-	.long	0x6000ff80,0x08ee0003,0xff664a2e,0xff846a06
-	.long	0x08ee0003,0xff64122e,0xff620201,0x000b661a
-	.long	0x41eeff84,0x222eff5c,0x61ff0000,0x4a74812e
-	.long	0xff64f22e,0xd080ff84,0x4e752d6e,0xff88ff94
-	.long	0x2d6eff8c,0xff98322e,0xff842f02,0x34010281
-	.long	0x00007fff,0x92800242,0x80000681,0x00006000
-	.long	0x02417fff,0x84413d42,0xff90f22e,0xd040ff90
-	.long	0x241f60ac,0xf23c8800,0x00000000,0xf22e9000
-	.long	0xff5cf22e,0x4800ff84,0xf23c9000,0x00000000
-	.long	0xf201a800,0x83aeff64,0x00ae0000,0x1048ff64
-	.long	0x122eff62,0x02010013,0x661c082e,0x0003ff64
-	.long	0x56c1202e,0xff5c61ff,0x00004ae4,0x812eff64
-	.long	0xf210d080,0x4e752f02,0x322eff84,0x24010281
-	.long	0x00007fff,0x02428000,0x92800481,0x00006000
-	.long	0x02417fff,0x82423d41,0xff84241f,0xf22ed040
-	.long	0xff8460b6,0xf23c8800,0x00000000,0xf22e9000
-	.long	0xff5cf22e,0x4800ff84,0xf201a800,0xf23c9000
-	.long	0x00000000,0x83aeff64,0xf2000098,0xf23c58b8
-	.long	0x0002f293,0xff746000,0xfe7e0c01,0x00046700
-	.long	0xfdb60c01,0x000567ff,0x00001f98,0x0c010003
-	.long	0x67ff0000,0x1fa2f228,0x48000000,0xf200a800
-	.long	0xe1981d40,0xff644e75,0x51fc51fc,0x51fc51fc
-	.long	0x00003fff,0x0000007e,0x000003fe,0xffffc001
-	.long	0xffffff81,0xfffffc01,0x02000030,0x00000040
-	.long	0x60080200,0x00300000,0x00802d40,0xff5c4241
-	.long	0x122eff4f,0xe709822e,0xff4e6600,0x02d63d69
-	.long	0x0000ff90,0x2d690004,0xff942d69,0x0008ff98
-	.long	0x3d680000,0xff842d68,0x0004ff88,0x2d680008
-	.long	0xff8c61ff,0x00001e0e,0x2f0061ff,0x00001eb2
-	.long	0x4497d197,0x322eff5e,0xec09201f,0xb0bb148e
-	.long	0x6f000074,0xb0bb1520,0xff7a6700,0x020c6e00
-	.long	0x013cf22e,0xd080ff90,0xf22e9000,0xff5cf23c
-	.long	0x88000000,0x0000f22e,0x4820ff84,0xf201a800
-	.long	0xf23c9000,0x00000000,0x83aeff64,0xf22ef080
-	.long	0xff842f02,0x322eff84,0x24010281,0x00007fff
-	.long	0x02428000,0x92808242,0x3d41ff84,0x241ff22e
-	.long	0xd080ff84,0x4e750000,0x7fff0000,0x407f0000
-	.long	0x43ff201f,0x60c62f00,0xf22ed080,0xff90f22e
-	.long	0x9000ff5c,0xf23c8800,0x00000000,0xf22e4820
-	.long	0xff84f200,0xa800f23c,0x90000000,0x000081ae
-	.long	0xff64f227,0xe0013017,0xdffc0000,0x000c0280
-	.long	0x00007fff,0x9097b0bb,0x14ae6db6,0x201f00ae
-	.long	0x00001048,0xff64122e,0xff620201,0x0013661c
-	.long	0x082e0003,0xff6456c1,0x202eff5c,0x61ff0000
-	.long	0x48de812e,0xff64f210,0xd0804e75,0x222eff5c
-	.long	0x020100c0,0x6634f22e,0xf080ff84,0x2f02322e
-	.long	0xff843401,0x02810000,0x7fff9280,0x04810000
-	.long	0x60000241,0x7fff0242,0x80008242,0x3d41ff84
-	.long	0x241ff22e,0xd040ff84,0x60a6f22e,0xd080ff90
-	.long	0x222eff5c,0x02010030,0xf2019000,0xf22e4820
-	.long	0xff84f23c,0x90000000,0x000060aa,0x08ee0003
-	.long	0xff66f22e,0xd080ff90,0xf23c9000,0x00000010
-	.long	0xf23c8800,0x00000000,0xf22e4820,0xff84f201
-	.long	0xa800f23c,0x90000000,0x000083ae,0xff64122e
-	.long	0xff620201,0x000b6620,0xf22ef080,0xff8441ee
-	.long	0xff84222e,0xff5c61ff,0x00004726,0x812eff64
-	.long	0xf22ed080,0xff844e75,0xf22ed040,0xff90222e
-	.long	0xff5c0201,0x00c06652,0xf22e9000,0xff5cf23c
-	.long	0x88000000,0x0000f22e,0x48a0ff84,0xf23c9000
-	.long	0x00000000,0xf22ef040,0xff842f02,0x322eff84
-	.long	0x24010281,0x00007fff,0x02428000,0x92800681
-	.long	0x00006000,0x02417fff,0x82423d41,0xff84241f
-	.long	0xf22ed040,0xff846000,0xff80222e,0xff5c0201
-	.long	0x0030f201,0x900060a6,0xf22ed080,0xff90f22e
-	.long	0x9000ff5c,0xf23c8800,0x00000000,0xf22e4820
-	.long	0xff84f201,0xa800f23c,0x90000000,0x000083ae
-	.long	0xff64f200,0x0098f23c,0x58b80001,0xf292fdee
-	.long	0xf294fefa,0xf22ed040,0xff90222e,0xff5c0201
-	.long	0x00c00001,0x0010f201,0x9000f23c,0x88000000
-	.long	0x0000f22e,0x48a0ff84,0xf23c9000,0x00000000
-	.long	0xf2000498,0xf23c58b8,0x0001f293,0xfdb06000
-	.long	0xfebc323b,0x120a4efb,0x10064afc,0x0030fd20
-	.long	0x009e0072,0x0060fd20,0x00660000,0x00000072
-	.long	0x006c0072,0x00600072,0x00660000,0x000000d0
-	.long	0x00d0006c,0x006000d0,0x00660000,0x00000060
-	.long	0x00600060,0x00600060,0x00660000,0x0000fd20
-	.long	0x009e0072,0x0060fd20,0x00660000,0x00000066
-	.long	0x00660066,0x00660066,0x00660000,0x000060ff
-	.long	0x00001bd8,0x60ff0000,0x1bd260ff,0x00001c50
-	.long	0x10280000,0x12290000,0xb1016a10,0xf23c4400
-	.long	0x80000000,0x1d7c000c,0xff644e75,0xf23c4400
-	.long	0x00000000,0x1d7c0004,0xff644e75,0x006e0410
-	.long	0xff661028,0x00001229,0x0000b101,0x6a10f23c
-	.long	0x4400ff80,0x00001d7c,0x000aff64,0x4e75f23c
-	.long	0x44007f80,0x00001d7c,0x0002ff64,0x4e751029
-	.long	0x00001228,0x0000b101,0x6a16f229,0xd0800000
-	.long	0xf2000018,0xf200001a,0x1d7c000a,0xff644e75
-	.long	0xf229d080,0x0000f200,0x00181d7c,0x0002ff64
-	.long	0x4e750200,0x00300000,0x00406008,0x02000030
-	.long	0x00000080,0x2d40ff5c,0x122eff4e,0x66000276
-	.long	0x020000c0,0x66000090,0x2d680004,0xff882d68
-	.long	0x0008ff8c,0x30280000,0x0a408000,0x6a061d7c
-	.long	0x0008ff64,0x3d40ff84,0xf22ed080,0xff844e75
-	.long	0x020000c0,0x666008ee,0x0003ff66,0x2d680004
-	.long	0xff882d68,0x0008ff8c,0x30280000,0x0a408000
-	.long	0x6a061d7c,0x0008ff64,0x3d40ff84,0xf22ed080
-	.long	0xff84082e,0x0003ff62,0x66024e75,0x41eeff84
-	.long	0x61ff0000,0x42664440,0x06406000,0x322eff84
-	.long	0x02418000,0x02407fff,0x80413d40,0xff84f22e
-	.long	0xd040ff84,0x4e750c00,0x0040667e,0x3d680000
-	.long	0xff842d68,0x0004ff88,0x2d680008,0xff8c61ff
-	.long	0x00001982,0x0c800000,0x007f6c00,0x00900c80
-	.long	0xffffff81,0x67000178,0x6d0000f4,0xf23c8800
-	.long	0x00000000,0xf22e9000,0xff5cf22e,0x481aff84
-	.long	0xf201a800,0xf23c9000,0x00000000,0x83aeff64
-	.long	0x2f02f22e,0xf080ff84,0x322eff84,0x34010281
-	.long	0x00007fff,0x92800242,0x80008441,0x3d42ff84
-	.long	0x241ff22e,0xd080ff84,0x4e753d68,0x0000ff84
-	.long	0x2d680004,0xff882d68,0x0008ff8c,0x61ff0000
-	.long	0x19040c80,0x000003ff,0x6c120c80,0xfffffc01
-	.long	0x670000fc,0x6d000078,0x6000ff82,0x08ee0003
-	.long	0xff660a2e,0x0080ff84,0x6a0608ee,0x0003ff64
-	.long	0x122eff62,0x0201000b,0x661a41ee,0xff84222e
-	.long	0xff5c61ff,0x0000438a,0x812eff64,0xf22ed080
-	.long	0xff844e75,0x2d6eff88,0xff942d6e,0xff8cff98
-	.long	0x322eff84,0x2f022401,0x02810000,0x7fff0242
-	.long	0x80009280,0x06810000,0x60000241,0x7fff8242
-	.long	0x3d41ff90,0xf22ed040,0xff90241f,0x60acf23c
-	.long	0x88000000,0x0000f22e,0x9000ff5c,0xf22e481a
-	.long	0xff84f23c,0x90000000,0x0000f201,0xa80083ae
-	.long	0xff6400ae,0x00001048,0xff64122e,0xff620201
-	.long	0x0013661c,0x082e0003,0xff6456c1,0x202eff5c
-	.long	0x61ff0000,0x43fa812e,0xff64f210,0xd0804e75
-	.long	0x2f02322e,0xff842401,0x02810000,0x7fff0242
-	.long	0x80009280,0x04810000,0x60000241,0x7fff8242
-	.long	0x3d41ff84,0xf22ed040,0xff84241f,0x60b6f23c
-	.long	0x88000000,0x0000f22e,0x9000ff5c,0xf22e481a
-	.long	0xff84f201,0xa800f23c,0x90000000,0x000083ae
-	.long	0xff64f200,0x0098f23c,0x58b80002,0xf293ff74
-	.long	0x6000fe7e,0x0c010004,0x6700fdb6,0x0c010005
-	.long	0x67ff0000,0x18ae0c01,0x000367ff,0x000018b8
-	.long	0xf228481a,0x0000f200,0xa800e198,0x1d40ff64
-	.long	0x4e75122e,0xff4e6610,0x4a280000,0x6b024e75
-	.long	0x1d7c0008,0xff644e75,0x0c010001,0x67400c01
-	.long	0x00026724,0x0c010005,0x67ff0000,0x18660c01
-	.long	0x000367ff,0x00001870,0x4a280000,0x6b024e75
-	.long	0x1d7c0008,0xff644e75,0x4a280000,0x6b081d7c
-	.long	0x0002ff64,0x4e751d7c,0x000aff64,0x4e754a28
-	.long	0x00006b08,0x1d7c0004,0xff644e75,0x1d7c000c
-	.long	0xff644e75,0x122eff4e,0x66280200,0x0030f200
-	.long	0x9000f23c,0x88000000,0x0000f228,0x48010000
-	.long	0xf23c9000,0x00000000,0xf200a800,0x81aeff64
-	.long	0x4e750c01,0x0001672e,0x0c010002,0x674e0c01
-	.long	0x00046710,0x0c010005,0x67ff0000,0x17d660ff
-	.long	0x000017e4,0x3d680000,0xff841d7c,0x0080ff88
-	.long	0x41eeff84,0x60a44a28,0x00006b10,0xf23c4400
-	.long	0x00000000,0x1d7c0004,0xff644e75,0xf23c4400
-	.long	0x80000000,0x1d7c000c,0xff644e75,0xf228d080
-	.long	0x00004a28,0x00006b08,0x1d7c0002,0xff644e75
-	.long	0x1d7c000a,0xff644e75,0x122eff4e,0x6618f23c
-	.long	0x88000000,0x0000f228,0x48030000,0xf200a800
-	.long	0x81aeff64,0x4e750c01,0x0001672e,0x0c010002
-	.long	0x674e0c01,0x00046710,0x0c010005,0x67ff0000
-	.long	0x174260ff,0x00001750,0x3d680000,0xff841d7c
-	.long	0x0080ff88,0x41eeff84,0x60b44a28,0x00006b10
-	.long	0xf23c4400,0x00000000,0x1d7c0004,0xff644e75
-	.long	0xf23c4400,0x80000000,0x1d7c000c,0xff644e75
-	.long	0xf228d080,0x00004a28,0x00006b08,0x1d7c0002
-	.long	0xff644e75,0x1d7c000a,0xff644e75,0x02000030
-	.long	0x00000040,0x60080200,0x00300000,0x00802d40
-	.long	0xff5c122e,0xff4e6600,0x025c0200,0x00c0667e
-	.long	0x2d680004,0xff882d68,0x0008ff8c,0x32280000
-	.long	0x0881000f,0x3d41ff84,0xf22ed080,0xff844e75
-	.long	0x020000c0,0x665808ee,0x0003ff66,0x2d680004
-	.long	0xff882d68,0x0008ff8c,0x30280000,0x0880000f
-	.long	0x3d40ff84,0xf22ed080,0xff84082e,0x0003ff62
-	.long	0x66024e75,0x41eeff84,0x61ff0000,0x3e0e4440
-	.long	0x06406000,0x322eff84,0x02418000,0x02407fff
-	.long	0x80413d40,0xff84f22e,0xd040ff84,0x4e750c00
-	.long	0x0040667e,0x3d680000,0xff842d68,0x0004ff88
-	.long	0x2d680008,0xff8c61ff,0x0000152a,0x0c800000
-	.long	0x007f6c00,0x00900c80,0xffffff81,0x67000170
-	.long	0x6d0000ec,0xf23c8800,0x00000000,0xf22e9000
-	.long	0xff5cf22e,0x4818ff84,0xf201a800,0xf23c9000
-	.long	0x00000000,0x83aeff64,0x2f02f22e,0xf080ff84
-	.long	0x322eff84,0x24010281,0x00007fff,0x92800242
-	.long	0x80008441,0x3d42ff84,0x241ff22e,0xd080ff84
-	.long	0x4e753d68,0x0000ff84,0x2d680004,0xff882d68
-	.long	0x0008ff8c,0x61ff0000,0x14ac0c80,0x000003ff
-	.long	0x6c120c80,0xfffffc01,0x670000f4,0x6d000070
-	.long	0x6000ff82,0x08ee0003,0xff6608ae,0x0007ff84
-	.long	0x122eff62,0x0201000b,0x661a41ee,0xff84222e
-	.long	0xff5c61ff,0x00003f3a,0x812eff64,0xf22ed080
-	.long	0xff844e75,0x2d6eff88,0xff942d6e,0xff8cff98
-	.long	0x322eff84,0x2f022401,0x02810000,0x7fff0242
-	.long	0x80009280,0x06810000,0x60000241,0x7fff8242
-	.long	0x3d41ff90,0xf22ed040,0xff90241f,0x60acf23c
-	.long	0x88000000,0x0000f22e,0x9000ff5c,0xf22e4818
-	.long	0xff84f23c,0x90000000,0x0000f201,0xa80083ae
-	.long	0xff6400ae,0x00001048,0xff64122e,0xff620201
-	.long	0x0013661c,0x082e0003,0xff6456c1,0x202eff5c
-	.long	0x61ff0000,0x3faa812e,0xff64f210,0xd0804e75
-	.long	0x2f02322e,0xff842401,0x02810000,0x7fff0242
-	.long	0x80009280,0x04810000,0x60000241,0x7fff8242
-	.long	0x3d41ff84,0xf22ed040,0xff84241f,0x60b6f23c
-	.long	0x88000000,0x0000f22e,0x9000ff5c,0xf22e4818
-	.long	0xff84f201,0xa800f23c,0x90000000,0x000083ae
-	.long	0xff64f200,0x0098f23c,0x58b80002,0xf293ff74
-	.long	0x6000fe86,0x0c010004,0x6700fdc6,0x0c010005
-	.long	0x67ff0000,0x145e0c01,0x000367ff,0x00001468
-	.long	0xf2284818,0x00000c01,0x00026708,0x1d7c0004
-	.long	0xff644e75,0x1d7c0002,0xff644e75,0x4241122e
-	.long	0xff4fe709,0x822eff4e,0x6618f229,0xd0800000
-	.long	0xf2284838,0x0000f200,0xa800e198,0x1d40ff64
-	.long	0x4e75323b,0x120a4efb,0x10064afc,0x0030ffdc
-	.long	0xffdcffdc,0x006000f8,0x006e0000,0x0000ffdc
-	.long	0xffdcffdc,0x0060007c,0x006e0000,0x0000ffdc
-	.long	0xffdcffdc,0x0060007c,0x006e0000,0x00000060
-	.long	0x00600060,0x00600060,0x006e0000,0x00000114
-	.long	0x009c009c,0x006000bc,0x006e0000,0x0000006e
-	.long	0x006e006e,0x006e006e,0x006e0000,0x000061ff
-	.long	0x00001388,0x022e00f7,0xff644e75,0x61ff0000
-	.long	0x137a022e,0x00f7ff64,0x4e753d68,0x0000ff84
-	.long	0x20280004,0x08c0001f,0x2d40ff88,0x2d680008
-	.long	0xff8c41ee,0xff846000,0xff422d69,0x0000ff84
-	.long	0x20290004,0x08c0001f,0x2d40ff88,0x2d690008
-	.long	0xff8c43ee,0xff846000,0xff223d69,0x0000ff90
-	.long	0x3d680000,0xff842029,0x000408c0,0x001f2d40
-	.long	0xff942028,0x000408c0,0x001f2d40,0xff882d69
-	.long	0x0008ff98,0x2d680008,0xff8c43ee,0xff9041ee
-	.long	0xff846000,0xfee61028,0x00001229,0x0000b101
-	.long	0x6b00ff78,0x4a006b02,0x4e751d7c,0x0008ff64
-	.long	0x4e751028,0x00001229,0x0000b101,0x6b00ff7c
-	.long	0x4a006a02,0x4e751d7c,0x0008ff64,0x4e752d40
-	.long	0xff5c4241,0x122eff4f,0xe709822e,0xff4e6600
-	.long	0x02a03d69,0x0000ff90,0x2d690004,0xff942d69
-	.long	0x0008ff98,0x3d680000,0xff842d68,0x0004ff88
-	.long	0x2d680008,0xff8c61ff,0x0000119a,0x2f0061ff
-	.long	0x0000123e,0xd09f0c80,0xffffc001,0x670000f8
-	.long	0x6d000064,0x0c800000,0x40006700,0x01da6e00
-	.long	0x0122f22e,0xd080ff90,0xf22e9000,0xff5cf23c
-	.long	0x88000000,0x0000f22e,0x4827ff84,0xf201a800
-	.long	0xf23c9000,0x00000000,0x83aeff64,0xf22ef080
-	.long	0xff842f02,0x322eff84,0x24010281,0x00007fff
-	.long	0x02428000,0x92808242,0x3d41ff84,0x241ff22e
-	.long	0xd080ff84,0x4e75f22e,0xd080ff90,0xf22e9000
-	.long	0xff5cf23c,0x88000000,0x0000f22e,0x4827ff84
-	.long	0xf201a800,0xf23c9000,0x00000000,0x83aeff64
-	.long	0x00ae0000,0x1048ff64,0x122eff62,0x02010013
-	.long	0x6620082e,0x0003ff64,0x56c1202e,0xff5c0200
-	.long	0x003061ff,0x00003c98,0x812eff64,0xf210d080
-	.long	0x4e75f22e,0xf080ff84,0x2f02322e,0xff842401
-	.long	0x02810000,0x7fff9280,0x04810000,0x60000241
-	.long	0x7fff0242,0x80008242,0x3d41ff84,0x241ff22e
-	.long	0xd040ff84,0x60acf22e,0xd080ff90,0xf22e9000
-	.long	0xff5cf23c,0x88000000,0x0000f22e,0x4827ff84
-	.long	0xf201a800,0xf23c9000,0x00000000,0x83aeff64
-	.long	0xf2000098,0xf23c58b8,0x0002f293,0xff646000
-	.long	0xff0c08ee,0x0003ff66,0xf22ed080,0xff90f23c
-	.long	0x90000000,0x0010f23c,0x88000000,0x0000f22e
-	.long	0x4827ff84,0xf201a800,0xf23c9000,0x00000000
-	.long	0x83aeff64,0x122eff62,0x0201000b,0x6620f22e
-	.long	0xf080ff84,0x41eeff84,0x222eff5c,0x61ff0000
-	.long	0x3b56812e,0xff64f22e,0xd080ff84,0x4e75f22e
-	.long	0xd040ff90,0xf22e9000,0xff5cf23c,0x88000000
-	.long	0x0000f22e,0x48a7ff84,0xf23c9000,0x00000000
-	.long	0xf22ef040,0xff842f02,0x322eff84,0x24010281
-	.long	0x00007fff,0x02428000,0x92800681,0x00006000
-	.long	0x02417fff,0x82423d41,0xff84241f,0xf22ed040
-	.long	0xff846000,0xff8af22e,0xd080ff90,0xf22e9000
-	.long	0xff5cf23c,0x88000000,0x0000f22e,0x4827ff84
-	.long	0xf201a800,0xf23c9000,0x00000000,0x83aeff64
-	.long	0xf2000098,0xf23c58b8,0x0002f292,0xfe20f294
-	.long	0xff12f22e,0xd040ff90,0x222eff5c,0x020100c0
-	.long	0x00010010,0xf2019000,0xf23c8800,0x00000000
-	.long	0xf22e48a7,0xff84f23c,0x90000000,0x0000f200
-	.long	0x0498f23c,0x58b80002,0xf293fde2,0x6000fed4
-	.long	0x323b120a,0x4efb1006,0x4afc0030,0xfd560072
-	.long	0x0078006c,0xfd560066,0x00000000,0x00720072
-	.long	0x0060006c,0x00720066,0x00000000,0x007e0060
-	.long	0x007e006c,0x007e0066,0x00000000,0x006c006c
-	.long	0x006c006c,0x006c0066,0x00000000,0xfd560072
-	.long	0x0078006c,0xfd560066,0x00000000,0x00660066
-	.long	0x00660066,0x00660066,0x00000000,0x60ff0000
-	.long	0x101e60ff,0x00000f94,0x60ff0000,0x0f8e60ff
-	.long	0xffffed0e,0x60ffffff,0xed6260ff,0xffffed2e
-	.long	0x2d40ff5c,0x4241122e,0xff4fe709,0x822eff4e
-	.long	0x6600027c,0x3d690000,0xff902d69,0x0004ff94
-	.long	0x2d690008,0xff983d68,0x0000ff84,0x2d680004
-	.long	0xff882d68,0x0008ff8c,0x61ff0000,0x0e582f00
-	.long	0x61ff0000,0x0efc4497,0xd197322e,0xff5eec09
-	.long	0x201f0c80,0xffffc001,0x6f000064,0x0c800000
-	.long	0x3fff6700,0x01b66e00,0x0100f22e,0xd080ff90
-	.long	0xf22e9000,0xff5cf23c,0x88000000,0x0000f22e
-	.long	0x4824ff84,0xf201a800,0xf23c9000,0x00000000
-	.long	0x83aeff64,0xf22ef080,0xff842f02,0x322eff84
-	.long	0x24010281,0x00007fff,0x02428000,0x92808242
-	.long	0x3d41ff84,0x241ff22e,0xd080ff84,0x4e75f22e
-	.long	0xd080ff90,0xf22e9000,0xff5cf23c,0x88000000
-	.long	0x0000f22e,0x4824ff84,0xf201a800,0xf23c9000
-	.long	0x00000000,0x83aeff64,0xf227e001,0x3217dffc
-	.long	0x0000000c,0x02810000,0x7fff9280,0x0c810000
-	.long	0x7fff6d90,0x006e1048,0xff66122e,0xff620201
-	.long	0x00136620,0x082e0003,0xff6456c1,0x202eff5c
-	.long	0x02000030,0x61ff0000,0x3936812e,0xff64f210
-	.long	0xd0804e75,0xf22ef080,0xff842f02,0x322eff84
-	.long	0x24010281,0x00007fff,0x02428000,0x92800481
-	.long	0x00006000,0x02417fff,0x82423d41,0xff84241f
-	.long	0xf22ed040,0xff8460ac,0x08ee0003,0xff66f22e
-	.long	0xd080ff90,0xf23c9000,0x00000010,0xf23c8800
-	.long	0x00000000,0xf22e4824,0xff84f201,0xa800f23c
-	.long	0x90000000,0x000083ae,0xff64122e,0xff620201
-	.long	0x000b6620,0xf22ef080,0xff8441ee,0xff84222e
-	.long	0xff5c61ff,0x00003830,0x812eff64,0xf22ed080
-	.long	0xff844e75,0xf22ed040,0xff90f22e,0x9000ff5c
-	.long	0xf23c8800,0x00000000,0xf22e48a4,0xff84f23c
-	.long	0x90000000,0x0000f22e,0xf040ff84,0x2f02322e
-	.long	0xff842401,0x02810000,0x7fff0242,0x80009280
-	.long	0x06810000,0x60000241,0x7fff8242,0x3d41ff84
-	.long	0x241ff22e,0xd040ff84,0x608af22e,0xd080ff90
-	.long	0xf22e9000,0xff5cf23c,0x88000000,0x0000f22e
-	.long	0x4824ff84,0xf201a800,0xf23c9000,0x00000000
-	.long	0x83aeff64,0xf2000098,0xf23c58b8,0x0001f292
-	.long	0xfe44f294,0xff14f22e,0xd040ff90,0x42810001
-	.long	0x0010f201,0x9000f23c,0x88000000,0x0000f22e
-	.long	0x48a4ff84,0xf23c9000,0x00000000,0xf2000498
-	.long	0xf23c58b8,0x0001f293,0xfe0c6000,0xfedc323b
-	.long	0x120a4efb,0x10064afc,0x0030fd7a,0x00720078
-	.long	0x0060fd7a,0x00660000,0x00000078,0x006c0078
-	.long	0x00600078,0x00660000,0x0000007e,0x007e006c
-	.long	0x0060007e,0x00660000,0x00000060,0x00600060
-	.long	0x00600060,0x00660000,0x0000fd7a,0x00720078
-	.long	0x0060fd7a,0x00660000,0x00000066,0x00660066
-	.long	0x00660066,0x00660000,0x000060ff,0x00000c7c
-	.long	0x60ff0000,0x0c7660ff,0x00000cf4,0x60ffffff
-	.long	0xf0ce60ff,0xfffff09c,0x60ffffff,0xf0f40200
-	.long	0x00300000,0x00406008,0x02000030,0x00000080
-	.long	0x2d40ff5c,0x4241122e,0xff4fe709,0x822eff4e
-	.long	0x6600024c,0x61ff0000,0x0a5cf22e,0xd080ff90
-	.long	0xf23c8800,0x00000000,0xf22e9000,0xff5cf22e
-	.long	0x4822ff84,0xf23c9000,0x00000000,0xf201a800
-	.long	0x83aeff64,0xf281003c,0x2f02f227,0xe001322e
-	.long	0xff5eec09,0x34170282,0x00007fff,0x9480b4bb
-	.long	0x14246c38,0xb4bb142a,0x6d0000b8,0x67000184
-	.long	0x32170241,0x80008242,0x3e81f21f,0xd080241f
-	.long	0x4e754e75,0x00007fff,0x0000407f,0x000043ff
-	.long	0x00000000,0x00003f81,0x00003c01,0x00ae0000
-	.long	0x1048ff64,0x122eff62,0x02010013,0x6624dffc
-	.long	0x0000000c,0x082e0003,0xff6456c1,0x202eff5c
-	.long	0x61ff0000,0x366a812e,0xff64f210,0xd080241f
-	.long	0x4e75122e,0xff5c0201,0x00c0661a,0x32170241
-	.long	0x80000482,0x00006000,0x02427fff,0x82423e81
-	.long	0xf21fd040,0x60bef22e,0xd080ff90,0x222eff5c
-	.long	0x02010030,0xf2019000,0xf22e4822,0xff84f23c
-	.long	0x90000000,0x0000dffc,0x0000000c,0xf227e001
-	.long	0x60ba08ee,0x0003ff66,0xdffc0000,0x000cf22e
-	.long	0xd080ff90,0xf23c9000,0x00000010,0xf23c8800
-	.long	0x00000000,0xf22e4822,0xff84f23c,0x90000000
-	.long	0x0000f201,0xa80083ae,0xff64122e,0xff620201
-	.long	0x000b6622,0xf22ef080,0xff8441ee,0xff84222e
-	.long	0xff5c61ff,0x000034ba,0x812eff64,0xf22ed080
-	.long	0xff84241f,0x4e75f22e,0xd040ff90,0x222eff5c
-	.long	0x020100c0,0x664ef22e,0x9000ff5c,0xf23c8800
-	.long	0x00000000,0xf22e48a2,0xff84f23c,0x90000000
-	.long	0x0000f22e,0xf040ff84,0x322eff84,0x24010281
-	.long	0x00007fff,0x02428000,0x92800681,0x00006000
-	.long	0x02417fff,0x82423d41,0xff84f22e,0xd040ff84
-	.long	0x6000ff82,0x222eff5c,0x02010030,0xf2019000
-	.long	0x60aa222e,0xff5c0201,0x00c06700,0xfe74222f
-	.long	0x00040c81,0x80000000,0x6600fe66,0x4aaf0008
-	.long	0x6600fe5e,0x082e0001,0xff666700,0xfe54f22e
-	.long	0xd040ff90,0x222eff5c,0x020100c0,0x00010010
-	.long	0xf2019000,0xf23c8800,0x00000000,0xf22e48a2
-	.long	0xff84f23c,0x90000000,0x0000f200,0x0018f200
-	.long	0x0498f200,0x0438f292,0xfeca6000,0xfe14323b
-	.long	0x120a4efb,0x10064afc,0x0030fdaa,0x00e4011c
-	.long	0x0060fdaa,0x00660000,0x000000bc,0x006c011c
-	.long	0x006000bc,0x00660000,0x00000130,0x0130010c
-	.long	0x00600130,0x00660000,0x00000060,0x00600060
-	.long	0x00600060,0x00660000,0x0000fdaa,0x00e4011c
-	.long	0x0060fdaa,0x00660000,0x00000066,0x00660066
-	.long	0x00660066,0x00660000,0x000060ff,0x0000097c
-	.long	0x60ff0000,0x09761028,0x00001229,0x0000b101
-	.long	0x6b000016,0x4a006b2e,0xf23c4400,0x00000000
-	.long	0x1d7c0004,0xff644e75,0x122eff5f,0x02010030
-	.long	0x0c010020,0x6710f23c,0x44000000,0x00001d7c
-	.long	0x0004ff64,0x4e75f23c,0x44008000,0x00001d7c
-	.long	0x000cff64,0x4e753d68,0x0000ff84,0x2d680004
-	.long	0xff882d68,0x0008ff8c,0x61ff0000,0x0828426e
-	.long	0xff9042ae,0xff9442ae,0xff986000,0xfcce3d69
-	.long	0x0000ff90,0x2d690004,0xff942d69,0x0008ff98
-	.long	0x61ff0000,0x08ac426e,0xff8442ae,0xff8842ae
-	.long	0xff8c6000,0xfca61028,0x00001229,0x0000b300
-	.long	0x6bff0000,0x094af228,0xd0800000,0x4a280000
-	.long	0x6a1c1d7c,0x000aff64,0x4e75f229,0xd0800000
-	.long	0x4a290000,0x6a081d7c,0x000aff64,0x4e751d7c
-	.long	0x0002ff64,0x4e750200,0x00300000,0x00406008
-	.long	0x02000030,0x00000080,0x2d40ff5c,0x4241122e
-	.long	0xff4fe709,0x822eff4e,0x6600024c,0x61ff0000
-	.long	0x0694f22e,0xd080ff90,0xf23c8800,0x00000000
-	.long	0xf22e9000,0xff5cf22e,0x4828ff84,0xf23c9000
-	.long	0x00000000,0xf201a800,0x83aeff64,0xf281003c
-	.long	0x2f02f227,0xe001322e,0xff5eec09,0x34170282
-	.long	0x00007fff,0x9480b4bb,0x14246c38,0xb4bb142a
-	.long	0x6d0000b8,0x67000184,0x32170241,0x80008242
-	.long	0x3e81f21f,0xd080241f,0x4e754e75,0x00007fff
-	.long	0x0000407f,0x000043ff,0x00000000,0x00003f81
-	.long	0x00003c01,0x00ae0000,0x1048ff64,0x122eff62
-	.long	0x02010013,0x6624dffc,0x0000000c,0x082e0003
-	.long	0xff6456c1,0x202eff5c,0x61ff0000,0x32a2812e
-	.long	0xff64f210,0xd080241f,0x4e75122e,0xff5c0201
-	.long	0x00c0661a,0x32170241,0x80000482,0x00006000
-	.long	0x02427fff,0x82423e81,0xf21fd040,0x60bef22e
-	.long	0xd080ff90,0x222eff5c,0x02010030,0xf2019000
-	.long	0xf22e4828,0xff84f23c,0x90000000,0x0000dffc
-	.long	0x0000000c,0xf227e001,0x60ba08ee,0x0003ff66
-	.long	0xdffc0000,0x000cf22e,0xd080ff90,0xf23c9000
-	.long	0x00000010,0xf23c8800,0x00000000,0xf22e4828
-	.long	0xff84f23c,0x90000000,0x0000f201,0xa80083ae
-	.long	0xff64122e,0xff620201,0x000b6622,0xf22ef080
-	.long	0xff8441ee,0xff84222e,0xff5c61ff,0x000030f2
-	.long	0x812eff64,0xf22ed080,0xff84241f,0x4e75f22e
-	.long	0xd040ff90,0x222eff5c,0x020100c0,0x664ef22e
-	.long	0x9000ff5c,0xf23c8800,0x00000000,0xf22e48a8
-	.long	0xff84f23c,0x90000000,0x0000f22e,0xf040ff84
-	.long	0x322eff84,0x24010281,0x00007fff,0x02428000
-	.long	0x92800681,0x00006000,0x02417fff,0x82423d41
-	.long	0xff84f22e,0xd040ff84,0x6000ff82,0x222eff5c
-	.long	0x02010030,0xf2019000,0x60aa222e,0xff5c0201
-	.long	0x00c06700,0xfe74222f,0x00040c81,0x80000000
-	.long	0x6600fe66,0x4aaf0008,0x6600fe5e,0x082e0001
-	.long	0xff666700,0xfe54f22e,0xd040ff90,0x222eff5c
-	.long	0x020100c0,0x00010010,0xf2019000,0xf23c8800
-	.long	0x00000000,0xf22e48a8,0xff84f23c,0x90000000
-	.long	0x0000f200,0x0018f200,0x0498f200,0x0438f292
-	.long	0xfeca6000,0xfe14323b,0x120a4efb,0x10064afc
-	.long	0x0030fdaa,0x00e2011a,0x0060fdaa,0x00660000
-	.long	0x000000ba,0x006c011a,0x006000ba,0x00660000
-	.long	0x00000130,0x0130010a,0x00600130,0x00660000
-	.long	0x00000060,0x00600060,0x00600060,0x00660000
-	.long	0x0000fdaa,0x00e2011a,0x0060fdaa,0x00660000
-	.long	0x00000066,0x00660066,0x00660066,0x00660000
-	.long	0x000060ff,0x000005b4,0x60ff0000,0x05ae1028
-	.long	0x00001229,0x0000b300,0x6a144a00,0x6b2ef23c
-	.long	0x44000000,0x00001d7c,0x0004ff64,0x4e75122e
-	.long	0xff5f0201,0x00300c01,0x00206710,0xf23c4400
-	.long	0x00000000,0x1d7c0004,0xff644e75,0xf23c4400
-	.long	0x80000000,0x1d7c000c,0xff644e75,0x3d680000
-	.long	0xff842d68,0x0004ff88,0x2d680008,0xff8c61ff
-	.long	0x00000462,0x426eff90,0x42aeff94,0x42aeff98
-	.long	0x6000fcd0,0x3d690000,0xff902d69,0x0004ff94
-	.long	0x2d690008,0xff9861ff,0x000004e6,0x426eff84
-	.long	0x42aeff88,0x42aeff8c,0x6000fca8,0x10280000
-	.long	0x12290000,0xb3006aff,0x00000584,0xf228d080
-	.long	0x0000f200,0x001af293,0x001e1d7c,0x000aff64
-	.long	0x4e75f229,0xd0800000,0x4a290000,0x6a081d7c
-	.long	0x000aff64,0x4e751d7c,0x0002ff64,0x4e750200
-	.long	0x00300000,0x00406008,0x02000030,0x00000080
-	.long	0x2d40ff5c,0x4241122e,0xff4e6600,0x02744a28
-	.long	0x00006bff,0x00000528,0x020000c0,0x6648f22e
-	.long	0x9000ff5c,0xf23c8800,0x00000000,0xf2104804
-	.long	0xf201a800,0x83aeff64,0x4e754a28,0x00006bff
-	.long	0x000004fc,0x020000c0,0x661c3d68,0x0000ff84
-	.long	0x2d680004,0xff882d68,0x0008ff8c,0x61ff0000
-	.long	0x03ae6000,0x003e0c00,0x00406600,0x00843d68
-	.long	0x0000ff84,0x2d680004,0xff882d68,0x0008ff8c
-	.long	0x61ff0000,0x038a0c80,0x0000007e,0x67000098
-	.long	0x6e00009e,0x0c80ffff,0xff806700,0x01a46d00
-	.long	0x0120f23c,0x88000000,0x0000f22e,0x9000ff5c
-	.long	0xf22e4804,0xff84f201,0xa800f23c,0x90000000
-	.long	0x000083ae,0xff642f02,0xf22ef080,0xff84322e
-	.long	0xff842401,0x02810000,0x7fff9280,0x02428000
-	.long	0x84413d42,0xff84241f,0xf22ed080,0xff844e75
-	.long	0x3d680000,0xff842d68,0x0004ff88,0x2d680008
-	.long	0xff8c61ff,0x00000308,0x0c800000,0x03fe6700
-	.long	0x00166e1c,0x0c80ffff,0xfc006700,0x01246d00
-	.long	0x00a06000,0xff7e082e,0x0000ff85,0x6600ff74
-	.long	0x08ee0003,0xff66f23c,0x90000000,0x0010f23c
-	.long	0x88000000,0x0000f22e,0x4804ff84,0xf201a800
-	.long	0xf23c9000,0x00000000,0x83aeff64,0x122eff62
-	.long	0x0201000b,0x6620f22e,0xf080ff84,0x41eeff84
-	.long	0x222eff5c,0x61ff0000,0x2d28812e,0xff64f22e
-	.long	0xd080ff84,0x4e752d6e,0xff88ff94,0x2d6eff8c
-	.long	0xff98322e,0xff842f02,0x24010281,0x00007fff
-	.long	0x02428000,0x92800681,0x00006000,0x02417fff
-	.long	0x82423d41,0xff90f22e,0xd040ff90,0x241f60a6
-	.long	0xf23c8800,0x00000000,0xf22e9000,0xff5cf22e
-	.long	0x4804ff84,0xf23c9000,0x00000000,0xf201a800
-	.long	0x83aeff64,0x00ae0000,0x1048ff64,0x122eff62
-	.long	0x02010013,0x661c082e,0x0003ff64,0x56c1202e
-	.long	0xff5c61ff,0x00002d98,0x812eff64,0xf210d080
-	.long	0x4e752f02,0x322eff84,0x24010281,0x00007fff
-	.long	0x02428000,0x92800481,0x00006000,0x02417fff
-	.long	0x82423d41,0xff84f22e,0xd040ff84,0x241f60b6
-	.long	0x082e0000,0xff856600,0xff78f23c,0x88000000
-	.long	0x0000f22e,0x9000ff5c,0xf22e4804,0xff84f201
-	.long	0xa800f23c,0x90000000,0x000083ae,0xff64f200
-	.long	0x0080f23c,0x58b80001,0xf293ff6a,0x6000fe48
-	.long	0x0c010004,0x6700fdb4,0x0c010001,0x67160c01
-	.long	0x00026736,0x0c010005,0x67ff0000,0x023660ff
-	.long	0x00000244,0x4a280000,0x6b10f23c,0x44000000
-	.long	0x00001d7c,0x0004ff64,0x4e75f23c,0x44008000
-	.long	0x00001d7c,0x000cff64,0x4e754a28,0x00006bff
-	.long	0x0000026c,0xf228d080,0x00001d7c,0x0002ff64
-	.long	0x4e752d68,0x0004ff88,0x2d690004,0xff942d68
-	.long	0x0008ff8c,0x2d690008,0xff983028,0x00003229
-	.long	0x00003d40,0xff843d41,0xff900240,0x7fff0241
-	.long	0x7fff3d40,0xff543d41,0xff56b041,0x6cff0000
-	.long	0x005c61ff,0x0000015a,0x2f000c2e,0x0004ff4e
-	.long	0x661041ee,0xff8461ff,0x00002940,0x44403d40
-	.long	0xff54302e,0xff560440,0x0042b06e,0xff546c1a
-	.long	0x302eff54,0xd06f0002,0x322eff84,0x02418000
-	.long	0x80413d40,0xff84201f,0x4e75026e,0x8000ff84
-	.long	0x08ee0000,0xff85201f,0x4e7561ff,0x00000056
-	.long	0x2f000c2e,0x0004ff4f,0x661041ee,0xff9061ff
-	.long	0x000028e8,0x44403d40,0xff56302e,0xff540440
-	.long	0x0042b06e,0xff566c1a,0x302eff56,0xd06f0002
-	.long	0x322eff90,0x02418000,0x80413d40,0xff90201f
-	.long	0x4e75026e,0x8000ff90,0x08ee0000,0xff91201f
-	.long	0x4e75322e,0xff843001,0x02810000,0x7fff0240
-	.long	0x80000040,0x3fff3d40,0xff840c2e,0x0004ff4e
-	.long	0x670a203c,0x00003fff,0x90814e75,0x41eeff84
-	.long	0x61ff0000,0x28764480,0x220060e6,0x0c2e0004
-	.long	0xff4e673a,0x322eff84,0x02810000,0x7fff026e
-	.long	0x8000ff84,0x08010000,0x6712006e,0x3fffff84
-	.long	0x203c0000,0x3fff9081,0xe2804e75,0x006e3ffe
-	.long	0xff84203c,0x00003ffe,0x9081e280,0x4e7541ee
-	.long	0xff8461ff,0x00002824,0x08000000,0x6710006e
-	.long	0x3fffff84,0x06800000,0x3fffe280,0x4e75006e
-	.long	0x3ffeff84,0x06800000,0x3ffee280,0x4e75322e
-	.long	0xff903001,0x02810000,0x7fff0240,0x80000040
-	.long	0x3fff3d40,0xff900c2e,0x0004ff4f,0x670a203c
-	.long	0x00003fff,0x90814e75,0x41eeff90,0x61ff0000
-	.long	0x27ca4480,0x220060e6,0x0c2e0005,0xff4f6732
-	.long	0x0c2e0003,0xff4f673e,0x0c2e0003,0xff4e6714
-	.long	0x08ee0006,0xff7000ae,0x01004080,0xff6441ee
-	.long	0xff6c6042,0x00ae0100,0x0000ff64,0x41eeff6c
-	.long	0x603400ae,0x01004080,0xff6408ee,0x0006ff7c
-	.long	0x41eeff78,0x602041ee,0xff780c2e,0x0005ff4e
-	.long	0x66ff0000,0x000c00ae,0x00004080,0xff6400ae
-	.long	0x01000000,0xff640828,0x00070000,0x670800ae
-	.long	0x08000000,0xff64f210,0xd0804e75,0x00ae0100
-	.long	0x2080ff64,0xf23bd080,0x01700000,0x00084e75
-	.long	0x7fff0000,0xffffffff,0xffffffff,0x2d40ff54
-	.long	0x302eff42,0x4281122e,0xff64e099,0xf2018800
-	.long	0x323b0206,0x4efb1002,0x02340040,0x02f8030c
-	.long	0x03200334,0x0348035c,0x03660352,0x033e032a
-	.long	0x03160302,0x004a0238,0x023a0276,0x0054009e
-	.long	0x0102014c,0x01b201fc,0x021801d8,0x018c0128
-	.long	0x00de007a,0x02b6025a,0xf2810006,0x6000032a
-	.long	0x4e75f28e,0x00066000,0x03204e75,0xf2920022
-	.long	0x082e0000,0xff646700,0x031000ae,0x00008080
-	.long	0xff64082e,0x0007ff62,0x6600032c,0x600002fa
-	.long	0x4e75f29d,0x00066000,0x02f0082e,0x0000ff64
-	.long	0x671200ae,0x00008080,0xff64082e,0x0007ff62
-	.long	0x66000304,0x4e75f293,0x0022082e,0x0000ff64
-	.long	0x670002c6,0x00ae0000,0x8080ff64,0x082e0007
-	.long	0xff626600,0x02e26000,0x02b0082e,0x0000ff64
-	.long	0x671200ae,0x00008080,0xff64082e,0x0007ff62
-	.long	0x660002c4,0x4e75f29c,0x00066000,0x028c082e
-	.long	0x0000ff64,0x671200ae,0x00008080,0xff64082e
-	.long	0x0007ff62,0x660002a0,0x4e75f294,0x0022082e
-	.long	0x0000ff64,0x67000262,0x00ae0000,0x8080ff64
-	.long	0x082e0007,0xff626600,0x027e6000,0x024c4e75
-	.long	0xf29b0006,0x60000242,0x082e0000,0xff646712
-	.long	0x00ae0000,0x8080ff64,0x082e0007,0xff626600
-	.long	0x02564e75,0xf2950022,0x082e0000,0xff646700
-	.long	0x021800ae,0x00008080,0xff64082e,0x0007ff62
-	.long	0x66000234,0x60000202,0x082e0000,0xff646712
-	.long	0x00ae0000,0x8080ff64,0x082e0007,0xff626600
-	.long	0x02164e75,0xf29a0006,0x600001de,0x082e0000
-	.long	0xff646700,0x001400ae,0x00008080,0xff64082e
-	.long	0x0007ff62,0x660001f0,0x4e75f296,0x0022082e
-	.long	0x0000ff64,0x670001b2,0x00ae0000,0x8080ff64
-	.long	0x082e0007,0xff626600,0x01ce6000,0x019c4e75
-	.long	0xf2990006,0x60000192,0x082e0000,0xff646712
-	.long	0x00ae0000,0x8080ff64,0x082e0007,0xff626600
-	.long	0x01a64e75,0xf2970018,0x00ae0000,0x8080ff64
-	.long	0x082e0007,0xff626600,0x018e6000,0x015c4e75
-	.long	0xf2980006,0x60000152,0x00ae0000,0x8080ff64
-	.long	0x082e0007,0xff626600,0x016e4e75,0x6000013a
-	.long	0x4e75082e,0x0000ff64,0x6700012e,0x00ae0000
-	.long	0x8080ff64,0x082e0007,0xff626600,0x014a6000
-	.long	0x0118082e,0x0000ff64,0x671200ae,0x00008080
-	.long	0xff64082e,0x0007ff62,0x6600012c,0x4e75f291
-	.long	0x0022082e,0x0000ff64,0x670000ee,0x00ae0000
-	.long	0x8080ff64,0x082e0007,0xff626600,0x010a6000
-	.long	0x00d8082e,0x0000ff64,0x671200ae,0x00008080
-	.long	0xff64082e,0x0007ff62,0x660000ec,0x4e75f29e
-	.long	0x0022082e,0x0000ff64,0x670000ae,0x00ae0000
-	.long	0x8080ff64,0x082e0007,0xff626600,0x00ca6000
-	.long	0x0098082e,0x0000ff64,0x67000014,0x00ae0000
-	.long	0x8080ff64,0x082e0007,0xff626600,0x00aa4e75
-	.long	0xf2820006,0x60000072,0x4e75f28d,0x00066000
-	.long	0x00684e75,0xf2830006,0x6000005e,0x4e75f28c
-	.long	0x00066000,0x00544e75,0xf2840006,0x6000004a
-	.long	0x4e75f28b,0x00066000,0x00404e75,0xf2850006
-	.long	0x60000036,0x4e75f28a,0x00066000,0x002c4e75
-	.long	0xf2860006,0x60000022,0x4e75f289,0x00066000
-	.long	0x00184e75,0xf2870006,0x6000000e,0x4e75f288
-	.long	0x00066000,0x00044e75,0x122eff41,0x02410007
-	.long	0x61ff0000,0x1d665340,0x61ff0000,0x1dd00c40
-	.long	0xffff6602,0x4e75202e,0xff54d0ae,0xff685880
-	.long	0x2d400006,0x4e751d7c,0x0002ff4a,0x4e75302e
-	.long	0xff424281,0x122eff64,0xe099f201,0x8800323b
-	.long	0x02064efb,0x1002021e,0x004002e4,0x02f002fc
-	.long	0x03080314,0x03200326,0x031a030e,0x030202f6
-	.long	0x02ea0046,0x02200224,0x0260004c,0x009200f8
-	.long	0x013e01a4,0x01ea0202,0x01c4017e,0x011800d2
-	.long	0x006c02a2,0x0240f281,0x02ea4e75,0xf28e02e4
-	.long	0x4e75f292,0x02de082e,0x0000ff64,0x671200ae
-	.long	0x00008080,0xff64082e,0x0007ff62,0x660002cc
-	.long	0x4e75f29d,0x00044e75,0x082e0000,0xff646700
-	.long	0x02b200ae,0x00008080,0xff64082e,0x0007ff62
-	.long	0x660002a8,0x6000029c,0xf293001e,0x082e0000
-	.long	0xff646712,0x00ae0000,0x8080ff64,0x082e0007
-	.long	0xff626600,0x02864e75,0x082e0000,0xff646700
-	.long	0x027200ae,0x00008080,0xff64082e,0x0007ff62
-	.long	0x66000268,0x6000025c,0xf29c0004,0x4e75082e
-	.long	0x0000ff64,0x6700024c,0x00ae0000,0x8080ff64
-	.long	0x082e0007,0xff626600,0x02426000,0x0236f294
-	.long	0x0232082e,0x0000ff64,0x671200ae,0x00008080
-	.long	0xff64082e,0x0007ff62,0x66000220,0x4e75f29b
-	.long	0x00044e75,0x082e0000,0xff646700,0x020600ae
-	.long	0x00008080,0xff64082e,0x0007ff62,0x660001fc
-	.long	0x600001f0,0xf295001e,0x082e0000,0xff646712
-	.long	0x00ae0000,0x8080ff64,0x082e0007,0xff626600
-	.long	0x01da4e75,0x082e0000,0xff646700,0x01c600ae
-	.long	0x00008080,0xff64082e,0x0007ff62,0x660001bc
-	.long	0x600001b0,0xf29a0004,0x4e75082e,0x0000ff64
-	.long	0x670001a0,0x00ae0000,0x8080ff64,0x082e0007
-	.long	0xff626600,0x01966000,0x018af296,0x0186082e
-	.long	0x0000ff64,0x671200ae,0x00008080,0xff64082e
-	.long	0x0007ff62,0x66000174,0x4e75f299,0x00044e75
-	.long	0x082e0000,0xff646700,0x015a00ae,0x00008080
-	.long	0xff64082e,0x0007ff62,0x66000150,0x60000144
-	.long	0xf2970140,0x00ae0000,0x8080ff64,0x082e0007
-	.long	0xff626600,0x01364e75,0xf2980004,0x4e7500ae
-	.long	0x00008080,0xff64082e,0x0007ff62,0x6600011c
-	.long	0x60000110,0x4e756000,0x010a082e,0x0000ff64
-	.long	0x671200ae,0x00008080,0xff64082e,0x0007ff62
-	.long	0x660000f8,0x4e75082e,0x0000ff64,0x670000e4
-	.long	0x00ae0000,0x8080ff64,0x082e0007,0xff626600
-	.long	0x00da6000,0x00cef291,0x0020082e,0x0000ff64
-	.long	0x67000014,0x00ae0000,0x8080ff64,0x082e0007
-	.long	0xff626600,0x00b64e75,0x082e0000,0xff646700
-	.long	0x00a200ae,0x00008080,0xff64082e,0x0007ff62
-	.long	0x66000098,0x6000008c,0xf29e0020,0x082e0000
-	.long	0xff646700,0x001400ae,0x00008080,0xff64082e
-	.long	0x0007ff62,0x66000074,0x4e75082e,0x0000ff64
-	.long	0x67000060,0x00ae0000,0x8080ff64,0x082e0007
-	.long	0xff626600,0x00566000,0x004af282,0x00464e75
-	.long	0xf28d0040,0x4e75f283,0x003a4e75,0xf28c0034
-	.long	0x4e75f284,0x002e4e75,0xf28b0028,0x4e75f285
-	.long	0x00224e75,0xf28a001c,0x4e75f286,0x00164e75
-	.long	0xf2890010,0x4e75f287,0x000a4e75,0xf2880004
-	.long	0x4e751d7c,0x0001ff4a,0x4e751d7c,0x0002ff4a
-	.long	0x4e75302e,0xff424281,0x122eff64,0xe099f201
-	.long	0x8800323b,0x02064efb,0x10020208,0x004002ac
-	.long	0x02cc02ec,0x030c032c,0x034c035c,0x033c031c
-	.long	0x02fc02dc,0x02bc0050,0x020e0214,0x02440060
-	.long	0x00a400fa,0x013e0194,0x01d801f0,0x01b60172
-	.long	0x011c00d8,0x00820278,0x022cf281,0x00084200
-	.long	0x6000032e,0x50c06000,0x0328f28e,0x00084200
-	.long	0x6000031e,0x50c06000,0x0318f292,0x001a4200
-	.long	0x082e0000,0xff646700,0x030800ae,0x00008080
-	.long	0xff646000,0x02f250c0,0x600002f6,0xf29d0008
-	.long	0x42006000,0x02ec50c0,0x082e0000,0xff646700
-	.long	0x02e000ae,0x00008080,0xff646000,0x02caf293
-	.long	0x001a4200,0x082e0000,0xff646700,0x02c400ae
-	.long	0x00008080,0xff646000,0x02ae50c0,0x082e0000
-	.long	0xff646700,0x02ac00ae,0x00008080,0xff646000
-	.long	0x0296f29c,0x00084200,0x60000296,0x50c0082e
-	.long	0x0000ff64,0x6700028a,0x00ae0000,0x8080ff64
-	.long	0x60000274,0xf294001a,0x4200082e,0x0000ff64
-	.long	0x6700026e,0x00ae0000,0x8080ff64,0x60000258
-	.long	0x50c06000,0x025cf29b,0x00084200,0x60000252
-	.long	0x50c0082e,0x0000ff64,0x67000246,0x00ae0000
-	.long	0x8080ff64,0x60000230,0xf295001a,0x4200082e
-	.long	0x0000ff64,0x6700022a,0x00ae0000,0x8080ff64
-	.long	0x60000214,0x50c0082e,0x0000ff64,0x67000212
-	.long	0x00ae0000,0x8080ff64,0x600001fc,0xf29a0008
-	.long	0x42006000,0x01fc50c0,0x082e0000,0xff646700
-	.long	0x01f000ae,0x00008080,0xff646000,0x01daf296
-	.long	0x001a4200,0x082e0000,0xff646700,0x01d400ae
-	.long	0x00008080,0xff646000,0x01be50c0,0x600001c2
-	.long	0xf2990008,0x42006000,0x01b850c0,0x082e0000
-	.long	0xff646700,0x01ac00ae,0x00008080,0xff646000
-	.long	0x0196f297,0x00104200,0x00ae0000,0x8080ff64
-	.long	0x60000184,0x50c06000,0x0188f298,0x00084200
-	.long	0x6000017e,0x50c000ae,0x00008080,0xff646000
-	.long	0x01664200,0x6000016a,0x50c06000,0x01644200
-	.long	0x082e0000,0xff646700,0x015800ae,0x00008080
-	.long	0xff646000,0x014250c0,0x082e0000,0xff646700
-	.long	0x014000ae,0x00008080,0xff646000,0x012af291
-	.long	0x001a4200,0x082e0000,0xff646700,0x012400ae
-	.long	0x00008080,0xff646000,0x010e50c0,0x082e0000
-	.long	0xff646700,0x010c00ae,0x00008080,0xff646000
-	.long	0x00f6f29e,0x001a4200,0x082e0000,0xff646700
-	.long	0x00f000ae,0x00008080,0xff646000,0x00da50c0
-	.long	0x082e0000,0xff646700,0x00d800ae,0x00008080
-	.long	0xff646000,0x00c2f282,0x00084200,0x600000c2
-	.long	0x50c06000,0x00bcf28d,0x00084200,0x600000b2
-	.long	0x50c06000,0x00acf283,0x00084200,0x600000a2
-	.long	0x50c06000,0x009cf28c,0x00084200,0x60000092
-	.long	0x50c06000,0x008cf284,0x00084200,0x60000082
-	.long	0x50c06000,0x007cf28b,0x00084200,0x60000072
-	.long	0x50c06000,0x006cf285,0x00084200,0x60000062
-	.long	0x50c06000,0x005cf28a,0x00084200,0x60000052
-	.long	0x50c06000,0x004cf286,0x00084200,0x60000042
-	.long	0x50c06000,0x003cf289,0x00084200,0x60000032
-	.long	0x50c06000,0x002cf287,0x00084200,0x60000022
-	.long	0x50c06000,0x001cf288,0x00084200,0x60000012
-	.long	0x50c06000,0x000c082e,0x0007ff62,0x66000088
-	.long	0x2040122e,0xff412001,0x02010038,0x66102200
-	.long	0x02410007,0x200861ff,0x0000172a,0x4e750c01
-	.long	0x0018671a,0x0c010020,0x67382008,0x206e000c
-	.long	0x61ffffff,0x5a7c4a81,0x66000054,0x4e752008
-	.long	0x206e000c,0x61ffffff,0x5a684a81,0x66000040
-	.long	0x122eff41,0x02410007,0x700161ff,0x00001722
-	.long	0x4e752008,0x206e000c,0x61ffffff,0x5a444a81
-	.long	0x6600001c,0x122eff41,0x02410007,0x700161ff
-	.long	0x0000174e,0x4e751d7c,0x0002ff4a,0x4e753d7c
-	.long	0x00a1000a,0x60ff0000,0x2b86122e,0xff430241
-	.long	0x0070e809,0x61ff0000,0x15b20280,0x000000ff
-	.long	0x2f00103b,0x09200148,0x2f0061ff,0x00000340
-	.long	0x201f221f,0x67000134,0x082e0005,0xff426700
-	.long	0x00b8082e,0x0004ff42,0x6600001a,0x123b1120
-	.long	0x021e082e,0x00050004,0x670a0c2e,0x0008ff4a
-	.long	0x66024e75,0x22489fc0,0x41d74a01,0x6a0c20ee
-	.long	0xffdc20ee,0xffe020ee,0xffe4e309,0x6a0c20ee
-	.long	0xffe820ee,0xffec20ee,0xfff0e309,0x6a0af210
-	.long	0xf020d1fc,0x0000000c,0xe3096a0a,0xf210f010
-	.long	0xd1fc0000,0x000ce309,0x6a0af210,0xf008d1fc
-	.long	0x0000000c,0xe3096a0a,0xf210f004,0xd1fc0000
-	.long	0x000ce309,0x6a0af210,0xf002d1fc,0x0000000c
-	.long	0xe3096a0a,0xf210f001,0xd1fc0000,0x000c2d49
-	.long	0xff5441d7,0x2f0061ff,0xffff58b2,0x201fdfc0
-	.long	0x4a816600,0x071e4e75,0x2d48ff54,0x9fc043d7
-	.long	0x2f012f00,0x61ffffff,0x587e201f,0x4a816600
-	.long	0x070e221f,0x41d74a01,0x6a0c2d58,0xffdc2d58
-	.long	0xffe02d58,0xffe4e309,0x6a0c2d58,0xffe82d58
-	.long	0xffec2d58,0xfff0e309,0x6a04f218,0xd020e309
-	.long	0x6a04f218,0xd010e309,0x6a04f218,0xd008e309
-	.long	0x6a04f218,0xd004e309,0x6a04f218,0xd002e309
-	.long	0x6a04f218,0xd001dfc0,0x4e754e75,0x000c0c18
-	.long	0x0c181824,0x0c181824,0x18242430,0x0c181824
-	.long	0x18242430,0x18242430,0x2430303c,0x0c181824
-	.long	0x18242430,0x18242430,0x2430303c,0x18242430
-	.long	0x2430303c,0x2430303c,0x303c3c48,0x0c181824
-	.long	0x18242430,0x18242430,0x2430303c,0x18242430
-	.long	0x2430303c,0x2430303c,0x303c3c48,0x18242430
-	.long	0x2430303c,0x2430303c,0x303c3c48,0x2430303c
-	.long	0x303c3c48,0x303c3c48,0x3c484854,0x0c181824
-	.long	0x18242430,0x18242430,0x2430303c,0x18242430
-	.long	0x2430303c,0x2430303c,0x303c3c48,0x18242430
-	.long	0x2430303c,0x2430303c,0x303c3c48,0x2430303c
-	.long	0x303c3c48,0x303c3c48,0x3c484854,0x18242430
-	.long	0x2430303c,0x2430303c,0x303c3c48,0x2430303c
-	.long	0x303c3c48,0x303c3c48,0x3c484854,0x2430303c
-	.long	0x303c3c48,0x303c3c48,0x3c484854,0x303c3c48
-	.long	0x3c484854,0x3c484854,0x48545460,0x008040c0
-	.long	0x20a060e0,0x109050d0,0x30b070f0,0x088848c8
-	.long	0x28a868e8,0x189858d8,0x38b878f8,0x048444c4
-	.long	0x24a464e4,0x149454d4,0x34b474f4,0x0c8c4ccc
-	.long	0x2cac6cec,0x1c9c5cdc,0x3cbc7cfc,0x028242c2
-	.long	0x22a262e2,0x129252d2,0x32b272f2,0x0a8a4aca
-	.long	0x2aaa6aea,0x1a9a5ada,0x3aba7afa,0x068646c6
-	.long	0x26a666e6,0x169656d6,0x36b676f6,0x0e8e4ece
-	.long	0x2eae6eee,0x1e9e5ede,0x3ebe7efe,0x018141c1
-	.long	0x21a161e1,0x119151d1,0x31b171f1,0x098949c9
-	.long	0x29a969e9,0x199959d9,0x39b979f9,0x058545c5
-	.long	0x25a565e5,0x159555d5,0x35b575f5,0x0d8d4dcd
-	.long	0x2dad6ded,0x1d9d5ddd,0x3dbd7dfd,0x038343c3
-	.long	0x23a363e3,0x139353d3,0x33b373f3,0x0b8b4bcb
-	.long	0x2bab6beb,0x1b9b5bdb,0x3bbb7bfb,0x078747c7
-	.long	0x27a767e7,0x179757d7,0x37b777f7,0x0f8f4fcf
-	.long	0x2faf6fef,0x1f9f5fdf,0x3fbf7fff,0x2040302e
-	.long	0xff403200,0x0240003f,0x02810000,0x0007303b
-	.long	0x020a4efb,0x00064afc,0x00400000,0x00000000
-	.long	0x00000000,0x00000000,0x00000000,0x00000000
-	.long	0x00000000,0x00000000,0x00000080,0x0086008c
-	.long	0x00900094,0x0098009c,0x00a000a6,0x00b600c6
-	.long	0x00d200de,0x00ea00f6,0x01020118,0x01260134
-	.long	0x013e0148,0x0152015c,0x0166017a,0x019801b6
-	.long	0x01d201ee,0x020a0226,0x02420260,0x02600260
-	.long	0x02600260,0x02600260,0x026002c0,0x02da02f4
-	.long	0x03140000,0x00000000,0x0000206e,0xffa44e75
-	.long	0x206effa8,0x4e75204a,0x4e75204b,0x4e75204c
-	.long	0x4e75204d,0x4e752056,0x4e75206e,0xffd84e75
-	.long	0x202effa4,0x2200d288,0x2d41ffa4,0x20404e75
-	.long	0x202effa8,0x2200d288,0x2d41ffa8,0x20404e75
-	.long	0x200a2200,0xd2882441,0x20404e75,0x200b2200
-	.long	0xd2882641,0x20404e75,0x200c2200,0xd2882841
-	.long	0x20404e75,0x200d2200,0xd2882a41,0x20404e75
-	.long	0x20162200,0xd2882c81,0x20404e75,0x1d7c0004
-	.long	0xff4a202e,0xffd82200,0xd2882d41,0xffd82040
-	.long	0x4e75202e,0xffa49088,0x2d40ffa4,0x20404e75
-	.long	0x202effa8,0x90882d40,0xffa82040,0x4e75200a
-	.long	0x90882440,0x20404e75,0x200b9088,0x26402040
-	.long	0x4e75200c,0x90882840,0x20404e75,0x200d9088
-	.long	0x2a402040,0x4e752016,0x90882c80,0x20404e75
-	.long	0x1d7c0008,0xff4a202e,0xffd89088,0x2d40ffd8
-	.long	0x20404e75,0x206eff44,0x54aeff44,0x61ffffff
-	.long	0x54a24a81,0x66ffffff,0x68203040,0xd1eeffa4
-	.long	0x4e75206e,0xff4454ae,0xff4461ff,0xffff5484
-	.long	0x4a8166ff,0xffff6802,0x3040d1ee,0xffa84e75
-	.long	0x206eff44,0x54aeff44,0x61ffffff,0x54664a81
-	.long	0x66ffffff,0x67e43040,0xd1ca4e75,0x206eff44
-	.long	0x54aeff44,0x61ffffff,0x544a4a81,0x66ffffff
-	.long	0x67c83040,0xd1cb4e75,0x206eff44,0x54aeff44
-	.long	0x61ffffff,0x542e4a81,0x66ffffff,0x67ac3040
-	.long	0xd1cc4e75,0x206eff44,0x54aeff44,0x61ffffff
-	.long	0x54124a81,0x66ffffff,0x67903040,0xd1cd4e75
-	.long	0x206eff44,0x54aeff44,0x61ffffff,0x53f64a81
-	.long	0x66ffffff,0x67743040,0xd1d64e75,0x206eff44
-	.long	0x54aeff44,0x61ffffff,0x53da4a81,0x66ffffff
-	.long	0x67583040,0xd1eeffd8,0x4e755081,0x61ff0000
-	.long	0x0fda2f00,0x206eff44,0x54aeff44,0x61ffffff
-	.long	0x53b24a81,0x66ffffff,0x6730205f,0x08000008
-	.long	0x660000e6,0x2d40ff54,0x2200e959,0x0241000f
-	.long	0x61ff0000,0x0fa62f02,0x242eff54,0x0802000b
-	.long	0x660248c0,0x2202ef59,0x02810000,0x0003e3a8
-	.long	0x49c2d082,0xd1c0241f,0x4e75206e,0xff4454ae
-	.long	0xff4461ff,0xffff535c,0x4a8166ff,0xffff66da
-	.long	0x30404e75,0x206eff44,0x58aeff44,0x61ffffff
-	.long	0x53584a81,0x66ffffff,0x66c02040,0x4e75206e
-	.long	0xff4454ae,0xff4461ff,0xffff5328,0x4a8166ff
-	.long	0xffff66a6,0x3040d1ee,0xff445588,0x4e75206e
-	.long	0xff4454ae,0xff4461ff,0xffff5308,0x4a8166ff
-	.long	0xffff6686,0x206eff44,0x55880800,0x00086600
-	.long	0x00382d40,0xff542200,0xe9590241,0x000f61ff
-	.long	0x00000ef8,0x2f02242e,0xff540802,0x000b6602
-	.long	0x48c02202,0xef590281,0x00000003,0xe3a849c2
-	.long	0xd082d1c0,0x241f4e75,0x08000006,0x670c48e7
-	.long	0x3c002a00,0x26084282,0x60282d40,0xff54e9c0
-	.long	0x140461ff,0x00000eb4,0x48e73c00,0x24002a2e
-	.long	0xff542608,0x0805000b,0x660248c2,0xe9c50542
-	.long	0xe1aa0805,0x00076702,0x4283e9c5,0x06820c00
-	.long	0x00026d34,0x6718206e,0xff4458ae,0xff4461ff
-	.long	0xffff5276,0x4a8166ff,0x000000b0,0x6018206e
-	.long	0xff4454ae,0xff4461ff,0xffff5248,0x4a8166ff
-	.long	0x00000098,0x48c0d680,0xe9c50782,0x6700006e
-	.long	0x0c000002,0x6d346718,0x206eff44,0x58aeff44
-	.long	0x61ffffff,0x52344a81,0x66ff0000,0x006e601c
-	.long	0x206eff44,0x54aeff44,0x61ffffff,0x52064a81
-	.long	0x66ff0000,0x005648c0,0x60024280,0x28000805
-	.long	0x00026714,0x204361ff,0xffff5240,0x4a816600
-	.long	0x0028d082,0xd0846018,0xd6822043,0x61ffffff
-	.long	0x522a4a81,0x66000012,0xd0846004,0xd6822003
-	.long	0x20404cdf,0x003c4e75,0x20434cdf,0x003c303c
-	.long	0x010160ff,0xffff6582,0x4cdf003c,0x60ffffff
-	.long	0x652861ff,0x000023c6,0x303c00e1,0x600a61ff
-	.long	0x000023ba,0x303c0161,0x206eff54,0x60ffffff
-	.long	0x6558102e,0xff420c00,0x009c6700,0x00b20c00
-	.long	0x00986700,0x00740c00,0x00946736,0x206eff44
-	.long	0x58aeff44,0x61ffffff,0x51704a81,0x66ffffff
-	.long	0x64d82d40,0xff64206e,0xff4458ae,0xff4461ff
-	.long	0xffff5156,0x4a8166ff,0xffff64be,0x2d40ff68
-	.long	0x4e75206e,0xff4458ae,0xff4461ff,0xffff513a
-	.long	0x4a8166ff,0xffff64a2,0x2d40ff60,0x206eff44
-	.long	0x58aeff44,0x61ffffff,0x51204a81,0x66ffffff
-	.long	0x64882d40,0xff684e75,0x206eff44,0x58aeff44
-	.long	0x61ffffff,0x51044a81,0x66ffffff,0x646c2d40
-	.long	0xff60206e,0xff4458ae,0xff4461ff,0xffff50ea
-	.long	0x4a8166ff,0xffff6452,0x2d40ff64,0x4e75206e
-	.long	0xff4458ae,0xff4461ff,0xffff50ce,0x4a8166ff
-	.long	0xffff6436,0x2d40ff60,0x206eff44,0x58aeff44
-	.long	0x61ffffff,0x50b44a81,0x66ffffff,0x641c2d40
-	.long	0xff64206e,0xff4458ae,0xff4461ff,0xffff509a
-	.long	0x4a8166ff,0xffff6402,0x2d40ff68,0x4e752040
-	.long	0x102eff41,0x22000240,0x00380281,0x00000007
-	.long	0x0c000018,0x67240c00,0x0020672c,0x80410c00
-	.long	0x003c6706,0x206e000c,0x4e751d7c,0x0080ff4a
-	.long	0x41f60162,0xff680004,0x4e752008,0x61ff0000
-	.long	0x0d70206e,0x000c4e75,0x200861ff,0x00000db2
-	.long	0x206e000c,0x0c00000c,0x67024e75,0x51882d48
-	.long	0x000c4e75,0x102eff41,0x22000240,0x00380281
-	.long	0x00000007,0x0c000018,0x670e0c00,0x00206700
-	.long	0x0076206e,0x000c4e75,0x323b120e,0x206e000c
-	.long	0x4efb1006,0x4afc0008,0x0010001a,0x0024002c
-	.long	0x0034003c,0x0044004e,0x06ae0000,0x000cffa4
-	.long	0x4e7506ae,0x0000000c,0xffa84e75,0xd5fc0000
-	.long	0x000c4e75,0xd7fc0000,0x000c4e75,0xd9fc0000
-	.long	0x000c4e75,0xdbfc0000,0x000c4e75,0x06ae0000
-	.long	0x000cffd4,0x4e751d7c,0x0004ff4a,0x06ae0000
-	.long	0x000cffd8,0x4e75323b,0x1214206e,0x000c5188
-	.long	0x51ae000c,0x4efb1006,0x4afc0008,0x00100016
-	.long	0x001c0020,0x00240028,0x002c0032,0x2d48ffa4
-	.long	0x4e752d48,0xffa84e75,0x24484e75,0x26484e75
-	.long	0x28484e75,0x2a484e75,0x2d48ffd4,0x4e752d48
-	.long	0xffd81d7c,0x0008ff4a,0x4e75082e,0x0006ff42
-	.long	0x6664102e,0xff430800,0x0005672c,0x08000004
-	.long	0x670a0240,0x007f0c40,0x0038661c,0xe9ee0183
-	.long	0xff4261ff,0x00000d6a,0x61ff0000,0x12060c00
-	.long	0x00066722,0x1d40ff4f,0xe9ee00c3,0xff4261ff
-	.long	0x00000cbe,0x61ff0000,0x11ea0c00,0x0006670e
-	.long	0x1d40ff4e,0x4e7561ff,0x00001148,0x60d661ff
-	.long	0x00001140,0x60ea302e,0xff420800,0x0005672c
-	.long	0x08000004,0x670a0240,0x007f0c40,0x0038661c
-	.long	0xe9ee0183,0xff4261ff,0x00000d06,0x61ff0000
-	.long	0x11a20c00,0x00066726,0x1d40ff4f,0xe9ee00c3
-	.long	0xff42e9ee,0x1283ff40,0x660000be,0x422eff4e
-	.long	0xe9ee1343,0xff40303b,0x02124efb,0x000e61ff
-	.long	0x000010e0,0x60d24afc,0x00080010,0x006a0000
-	.long	0x0000002e,0x0000004c,0x000061ff,0x00000a5c
-	.long	0xf2004000,0xf22ef080,0xff6cf281,0x00044e75
-	.long	0x1d7c0001,0xff4e4e75,0x61ff0000,0x0a3ef200
-	.long	0x5000f22e,0xf080ff6c,0xf2810004,0x4e751d7c
-	.long	0x0001ff4e,0x4e7561ff,0x00000a20,0xf2005800
-	.long	0xf22ef080,0xff6cf281,0x00044e75,0x1d7c0001
-	.long	0xff4e4e75,0x61ff0000,0x0a022d40,0xff5441ee
-	.long	0xff5461ff,0x000011de,0x1d40ff4e,0x0c000005
-	.long	0x670001a4,0x0c000004,0x6700015e,0xf2104400
-	.long	0xf22ef080,0xff6c4e75,0x422eff4e,0x303b020a
-	.long	0x4efb0006,0x4afc0008,0x001000e2,0x027202b0
-	.long	0x005601a0,0x009c0000,0x700461ff,0xfffffd22
-	.long	0x0c2e0080,0xff4a6726,0x61ffffff,0x4dde4a81
-	.long	0x66ff0000,0x1eecf200,0x4000f22e,0xf080ff6c
-	.long	0xf2810004,0x4e751d7c,0x0001ff4e,0x4e7561ff
-	.long	0xffff4d76,0x4a8166ff,0xffff6e8a,0x60d87002
-	.long	0x61ffffff,0xfcdc0c2e,0x0080ff4a,0x672661ff
-	.long	0xffff4d82,0x4a8166ff,0x00001e98,0xf2005000
-	.long	0xf22ef080,0xff6cf281,0x00044e75,0x1d7c0001
-	.long	0xff4e4e75,0x61ffffff,0x4d1a4a81,0x66ffffff
-	.long	0x6e4460d8,0x700161ff,0xfffffc96,0x0c2e0080
-	.long	0xff4a6726,0x61ffffff,0x4d264a81,0x66ff0000
-	.long	0x1e42f200,0x5800f22e,0xf080ff6c,0xf2810004
-	.long	0x4e751d7c,0x0001ff4e,0x4e7561ff,0xffff4cd4
-	.long	0x4a8166ff,0xffff6dfe,0x60d87004,0x61ffffff
-	.long	0xfc500c2e,0x0080ff4a,0x673e61ff,0xffff4d0c
-	.long	0x2d40ff54,0x4a8166ff,0x00001e16,0x41eeff54
-	.long	0x61ff0000,0x10a01d40,0xff4e0c00,0x00046700
-	.long	0x00280c00,0x00056700,0x005ef22e,0x4400ff54
-	.long	0xf22ef080,0xff6c4e75,0x61ffffff,0x4c8c4a81
-	.long	0x66ffffff,0x6da060c4,0x426eff6c,0xe9d00257
-	.long	0xe1882d40,0xff7042ae,0xff74426e,0xff6c0810
-	.long	0x00076706,0x08ee0007,0xff6c41ee,0xff6c61ff
-	.long	0x00000e78,0x323c3f81,0x9240836e,0xff6c1d7c
-	.long	0x0000ff4e,0x4e753d7c,0x7fffff6c,0xe9d00257
-	.long	0xe1882d40,0xff7042ae,0xff740810,0x00076706
-	.long	0x08ee0007,0xff6c4e75,0x700861ff,0xfffffb92
-	.long	0x0c2e0080,0xff4a6740,0x43eeff54,0x700861ff
-	.long	0xffff4bc4,0x4a8166ff,0x00001d64,0x41eeff54
-	.long	0x61ff0000,0x0f701d40,0xff4e0c00,0x00046700
-	.long	0x002e0c00,0x00056700,0x0068f22e,0x5400ff54
-	.long	0xf22ef080,0xff6c4e75,0x43eeff54,0x700861ff
-	.long	0xffff4b6e,0x4a8166ff,0xffff6cda,0x60be426e
-	.long	0xff6ce9d0,0x031f2d40,0xff70e9e8,0x02d50004
-	.long	0x720be3a8,0x2d40ff74,0x08100007,0x670608ee
-	.long	0x0007ff6c,0x41eeff6c,0x61ff0000,0x0dae323c
-	.long	0x3c019240,0x836eff6c,0x1d7c0000,0xff4e4e75
-	.long	0x3d7c7fff,0xff6ce9d0,0x031f2d40,0xff70e9e8
-	.long	0x02d50004,0x720be3a8,0x2d40ff74,0x08100007
-	.long	0x670608ee,0x0007ff6c,0x4e75700c,0x61ffffff
-	.long	0xfac043ee,0xff6c700c,0x61ffffff,0x4afa4a81
-	.long	0x66ff0000,0x1ca841ee,0xff6c61ff,0x00000e24
-	.long	0x0c000006,0x67061d40,0xff4e4e75,0x61ff0000
-	.long	0x0d821d40,0xff4e4e75,0x61ff0000,0x125441ee
-	.long	0xff6c61ff,0x00000dfc,0x0c000006,0x67061d40
-	.long	0xff4e4e75,0x61ff0000,0x0d5a1d40,0xff4e4e75
-	.long	0xe9ee10c3,0xff42327b,0x120a4efb,0x98064afc
-	.long	0x000800e0,0x01e00148,0x06200078,0x041a0010
-	.long	0x06204a2e,0xff4e664c,0xf228d080,0x0000f200
-	.long	0x9000f200,0x7800f23c,0x90000000,0x0000f201
-	.long	0xa800836e,0xff66122e,0xff410201,0x00386714
-	.long	0x206e000c,0x61ffffff,0x4ae84a81,0x66ff0000
-	.long	0x1c0a4e75,0x122eff41,0x02410007,0x61ff0000
-	.long	0x07644e75,0x22280000,0x02818000,0x00000081
-	.long	0x00800000,0xf2014400,0x60a44a2e,0xff4e664c
-	.long	0xf228d080,0x0000f200,0x9000f200,0x7000f23c
-	.long	0x90000000,0x0000f201,0xa800836e,0xff66122e
-	.long	0xff410201,0x00386714,0x206e000c,0x61ffffff
-	.long	0x4a964a81,0x66ff0000,0x1bb04e75,0x122eff41
-	.long	0x02410007,0x61ff0000,0x06c04e75,0x22280000
-	.long	0x02818000,0x00000081,0x00800000,0xf2014400
-	.long	0x60a44a2e,0xff4e664c,0xf228d080,0x0000f200
-	.long	0x9000f200,0x6000f23c,0x90000000,0x0000f201
-	.long	0xa800836e,0xff66122e,0xff410201,0x00386714
-	.long	0x206e000c,0x61ffffff,0x4a444a81,0x66ff0000
-	.long	0x1b564e75,0x122eff41,0x02410007,0x61ff0000
-	.long	0x061c4e75,0x22280000,0x02818000,0x00000081
-	.long	0x00800000,0xf2014400,0x60a43d68,0x0000ff84
-	.long	0x426eff86,0x2d680004,0xff882d68,0x0008ff8c
-	.long	0xf228d080,0x000061ff,0xfffff94c,0x224841ee
-	.long	0xff84700c,0x0c2e0008,0xff4a6726,0x61ffffff
-	.long	0x492c4a81,0x66000052,0x4a2eff4e,0x66024e75
-	.long	0x08ee0003,0xff66102e,0xff620200,0x000a6616
-	.long	0x4e7561ff,0xffff5788,0x4a816600,0x002c4a2e
-	.long	0xff4e66dc,0x4e7541ee,0xff8461ff,0x00000b3c
-	.long	0x44400240,0x7fff026e,0x8000ff84,0x816eff84
-	.long	0xf22ed040,0xff844e75,0x2caeffd4,0x60ff0000
-	.long	0x1ab20200,0x00300000,0x00402d40,0xff5c3028
-	.long	0x00000240,0x7fff0c40,0x407e6e00,0x00e66700
-	.long	0x01520c40,0x3f816d00,0x0058f228,0xd0800000
-	.long	0xf22e9000,0xff5cf23c,0x88000000,0x0000f200
-	.long	0x6400f23c,0x90000000,0x0000f201,0xa800836e
-	.long	0xff66122e,0xff410201,0x00386714,0x206e000c
-	.long	0x61ffffff,0x49184a81,0x66ff0000,0x1a2a4e75
-	.long	0x122eff41,0x02410007,0x61ff0000,0x04f04e75
-	.long	0x08ee0003,0xff663d68,0x0000ff84,0x2d680004
-	.long	0xff882d68,0x0008ff8c,0x2f084280,0x0c2e0004
-	.long	0xff4e660a,0x41eeff84,0x61ff0000,0x0a6e41ee
-	.long	0xff84222e,0xff5c61ff,0x00000c86,0x41eeff84
-	.long	0x61ff0000,0x034c122e,0xff410201,0x00386714
-	.long	0x206e000c,0x61ffffff,0x48a44a81,0x66ff0000
-	.long	0x19b6600e,0x122eff41,0x02410007,0x61ff0000
-	.long	0x047c122e,0xff620201,0x000a6600,0x00b8588f
-	.long	0x4e754a28,0x0007660e,0x4aa80008,0x6608006e
-	.long	0x1048ff66,0x6006006e,0x1248ff66,0x2f084a28
-	.long	0x00005bc1,0x202eff5c,0x61ff0000,0x0d12f210
-	.long	0xd080f200,0x6400122e,0xff410201,0x00386714
-	.long	0x206e000c,0x61ffffff,0x48344a81,0x66ff0000
-	.long	0x1946600e,0x122eff41,0x02410007,0x61ff0000
-	.long	0x040c122e,0xff620201,0x000a6600,0x007c588f
-	.long	0x4e753228,0x00000241,0x80000041,0x3fff3d41
-	.long	0xff842d68,0x0004ff88,0x2d680008,0xff8cf22e
-	.long	0x9000ff5c,0xf22e4800,0xff84f23c,0x90000000
-	.long	0x0000f200,0x0018f23c,0x58380002,0xf294fe7c
-	.long	0x6000ff50,0x205f3d68,0x0000ff84,0x2d680004
-	.long	0xff882d68,0x0008ff8c,0x0c2e0004,0xff4e662c
-	.long	0x41eeff84,0x61ff0000,0x09424480,0x02407fff
-	.long	0xefee004f,0xff846014,0x205f3d68,0x0000ff84
-	.long	0x2d680004,0xff882d68,0x0008ff8c,0x08ae0007
-	.long	0xff8456ee,0xff8641ee,0xff84122e,0xff5fe809
-	.long	0x0241000c,0x4841122e,0xff5fe809,0x02410003
-	.long	0x428061ff,0x00000782,0x4a2eff86,0x670608ee
-	.long	0x0007ff84,0xf22ed040,0xff844e75,0x02000030
-	.long	0x00000080,0x2d40ff5c,0x30280000,0x02407fff
-	.long	0x0c4043fe,0x6e0000c8,0x67000120,0x0c403c01
-	.long	0x6d000046,0xf228d080,0x0000f22e,0x9000ff5c
-	.long	0xf23c8800,0x00000000,0xf22e7400,0xff54f23c
-	.long	0x90000000,0x0000f200,0xa800816e,0xff66226e
-	.long	0x000c41ee,0xff547008,0x61ffffff,0x46304a81
-	.long	0x66ff0000,0x18004e75,0x08ee0003,0xff663d68
-	.long	0x0000ff84,0x2d680004,0xff882d68,0x0008ff8c
-	.long	0x2f084280,0x0c2e0004,0xff4e660a,0x41eeff84
-	.long	0x61ff0000,0x084641ee,0xff84222e,0xff5c61ff
-	.long	0x00000a5e,0x41eeff84,0x61ff0000,0x00d22d40
-	.long	0xff542d41,0xff58226e,0x000c41ee,0xff547008
-	.long	0x61ffffff,0x45c84a81,0x66ff0000,0x1798122e
-	.long	0xff620201,0x000a6600,0xfe9c588f,0x4e753028
-	.long	0x000a0240,0x07ff6608,0x006e1048,0xff666006
-	.long	0x006e1248,0xff662f08,0x4a280000,0x5bc1202e
-	.long	0xff5c61ff,0x00000af8,0xf210d080,0xf22e7400
-	.long	0xff54226e,0x000c41ee,0xff547008,0x61ffffff
-	.long	0x456c4a81,0x66ff0000,0x173c122e,0xff620201
-	.long	0x000a6600,0xfe74588f,0x4e753228,0x00000241
-	.long	0x80000041,0x3fff3d41,0xff842d68,0x0004ff88
-	.long	0x2d680008,0xff8cf22e,0x9000ff5c,0xf22e4800
-	.long	0xff84f23c,0x90000000,0x0000f200,0x0018f23c
-	.long	0x58380002,0xf294feae,0x6000ff64,0x42803028
-	.long	0x00000440,0x3fff0640,0x03ff4a28,0x00046b02
-	.long	0x53404840,0xe9884a28,0x00006a04,0x08c0001f
-	.long	0x22280004,0xe9c11054,0x80812d40,0xff542228
-	.long	0x00047015,0xe1a92d41,0xff582228,0x0008e9c1
-	.long	0x0015222e,0xff588280,0x202eff54,0x4e754280
-	.long	0x30280000,0x04403fff,0x0640007f,0x4a280004
-	.long	0x6b025340,0x4840ef88,0x4a280000,0x6a0408c0
-	.long	0x001f2228,0x00040281,0x7fffff00,0xe0898081
-	.long	0x4e7561ff,0xfffff490,0x2f08102e,0xff4e6600
-	.long	0x0082082e,0x0004ff42,0x6712122e,0xff43e809
-	.long	0x02410007,0x61ff0000,0x00926004,0x102eff43
-	.long	0xebc00647,0x2f0041ee,0xff6c61ff,0x00000ed0
-	.long	0x02aecfff,0xf00fff84,0x201f4a2e,0xff876616
-	.long	0x4aaeff88,0x66104aae,0xff8c660a,0x4a806606
-	.long	0x026ef000,0xff8441ee,0xff84225f,0x700c0c2e
-	.long	0x0008ff4a,0x670e61ff,0xffff4412,0x4a816600
-	.long	0xfb384e75,0x61ffffff,0x52864a81,0x6600fb2a
-	.long	0x4e750c00,0x00046700,0xff7a41ee,0xff6c426e
-	.long	0xff6e0c00,0x00056702,0x60c0006e,0x4080ff66
-	.long	0x08ee0006,0xff7060b2,0x303b1206,0x4efb0002
-	.long	0x00200026,0x002c0030,0x00340038,0x003c0040
-	.long	0x0044004a,0x00500054,0x0058005c,0x00600064
-	.long	0x202eff9c,0x4e75202e,0xffa04e75,0x20024e75
-	.long	0x20034e75,0x20044e75,0x20054e75,0x20064e75
-	.long	0x20074e75,0x202effa4,0x4e75202e,0xffa84e75
-	.long	0x200a4e75,0x200b4e75,0x200c4e75,0x200d4e75
-	.long	0x20164e75,0x202effd8,0x4e75323b,0x12064efb
-	.long	0x10020010,0x0016001c,0x00200024,0x0028002c
-	.long	0x00302d40,0xff9c4e75,0x2d40ffa0,0x4e752400
-	.long	0x4e752600,0x4e752800,0x4e752a00,0x4e752c00
-	.long	0x4e752e00,0x4e75323b,0x12064efb,0x10020010
-	.long	0x0016001c,0x00200024,0x0028002c,0x00303d40
-	.long	0xff9e4e75,0x3d40ffa2,0x4e753400,0x4e753600
-	.long	0x4e753800,0x4e753a00,0x4e753c00,0x4e753e00
-	.long	0x4e75323b,0x12064efb,0x10020010,0x0016001c
-	.long	0x00200024,0x0028002c,0x00301d40,0xff9f4e75
-	.long	0x1d40ffa3,0x4e751400,0x4e751600,0x4e751800
-	.long	0x4e751a00,0x4e751c00,0x4e751e00,0x4e75323b
-	.long	0x12064efb,0x10020010,0x0016001c,0x00200024
-	.long	0x0028002c,0x0030d1ae,0xffa44e75,0xd1aeffa8
-	.long	0x4e75d5c0,0x4e75d7c0,0x4e75d9c0,0x4e75dbc0
-	.long	0x4e75d196,0x4e751d7c,0x0004ff4a,0x0c000001
-	.long	0x6706d1ae,0xffd84e75,0x54aeffd8,0x4e75323b
-	.long	0x12064efb,0x10020010,0x0016001c,0x00200024
-	.long	0x0028002c,0x003091ae,0xffa44e75,0x91aeffa8
-	.long	0x4e7595c0,0x4e7597c0,0x4e7599c0,0x4e759bc0
-	.long	0x4e759196,0x4e751d7c,0x0008ff4a,0x0c000001
-	.long	0x670691ae,0xffd84e75,0x55aeffd8,0x4e75303b
-	.long	0x02064efb,0x00020010,0x00280040,0x004c0058
-	.long	0x00640070,0x007c2d6e,0xffdcff6c,0x2d6effe0
-	.long	0xff702d6e,0xffe4ff74,0x41eeff6c,0x4e752d6e
-	.long	0xffe8ff6c,0x2d6effec,0xff702d6e,0xfff0ff74
-	.long	0x41eeff6c,0x4e75f22e,0xf020ff6c,0x41eeff6c
-	.long	0x4e75f22e,0xf010ff6c,0x41eeff6c,0x4e75f22e
-	.long	0xf008ff6c,0x41eeff6c,0x4e75f22e,0xf004ff6c
-	.long	0x41eeff6c,0x4e75f22e,0xf002ff6c,0x41eeff6c
-	.long	0x4e75f22e,0xf001ff6c,0x41eeff6c,0x4e75303b
-	.long	0x02064efb,0x00020010,0x00280040,0x004c0058
-	.long	0x00640070,0x007c2d6e,0xffdcff78,0x2d6effe0
-	.long	0xff7c2d6e,0xffe4ff80,0x41eeff78,0x4e752d6e
-	.long	0xffe8ff78,0x2d6effec,0xff7c2d6e,0xfff0ff80
-	.long	0x41eeff78,0x4e75f22e,0xf020ff78,0x41eeff78
-	.long	0x4e75f22e,0xf010ff78,0x41eeff78,0x4e75f22e
-	.long	0xf008ff78,0x41eeff78,0x4e75f22e,0xf004ff78
-	.long	0x41eeff78,0x4e75f22e,0xf002ff78,0x41eeff78
-	.long	0x4e75f22e,0xf001ff78,0x41eeff78,0x4e75303b
-	.long	0x02064efb,0x00020010,0x00180020,0x002a0034
-	.long	0x003e0048,0x0052f22e,0xf080ffdc,0x4e75f22e
-	.long	0xf080ffe8,0x4e75f227,0xe001f21f,0xd0204e75
-	.long	0xf227e001,0xf21fd010,0x4e75f227,0xe001f21f
-	.long	0xd0084e75,0xf227e001,0xf21fd004,0x4e75f227
-	.long	0xe001f21f,0xd0024e75,0xf227e001,0xf21fd001
-	.long	0x4e750000,0x3f813c01,0xe408323b,0x02f63001
-	.long	0x90680000,0x0c400042,0x6a164280,0x082e0001
-	.long	0xff666704,0x08c0001d,0x61ff0000,0x001a4e75
-	.long	0x203c2000,0x00003141,0x000042a8,0x000442a8
-	.long	0x00084e75,0x2d680008,0xff542d40,0xff582001
-	.long	0x92680000,0x6f100c41,0x00206d10,0x0c410040
-	.long	0x6d506000,0x009a202e,0xff584e75,0x2f023140
-	.long	0x00007020,0x90410c41,0x001d6d08,0x142eff58
-	.long	0x852eff57,0xe9e82020,0x0004e9e8,0x18000004
-	.long	0xe9ee0800,0xff542142,0x00042141,0x0008e8c0
-	.long	0x009e6704,0x08c0001d,0x0280e000,0x0000241f
-	.long	0x4e752f02,0x31400000,0x04410020,0x70209041
-	.long	0x142eff58,0x852eff57,0xe9e82020,0x0004e9e8
-	.long	0x18000004,0xe8c1009e,0x660ce8ee,0x081fff54
-	.long	0x66042001,0x60062001,0x08c0001d,0x42a80004
-	.long	0x21420008,0x0280e000,0x0000241f,0x4e753140
-	.long	0x00000c41,0x00416d12,0x672442a8,0x000442a8
-	.long	0x0008203c,0x20000000,0x4e752028,0x00042200
-	.long	0x0280c000,0x00000281,0x3fffffff,0x60122028
-	.long	0x00040280,0x80000000,0xe2880281,0x7fffffff
-	.long	0x66164aa8,0x00086610,0x4a2eff58,0x660a42a8
-	.long	0x000442a8,0x00084e75,0x08c0001d,0x42a80004
-	.long	0x42a80008,0x4e7561ff,0x00000110,0x4a806700
-	.long	0x00fa006e,0x0208ff66,0x327b1206,0x4efb9802
-	.long	0x004000ea,0x00240008,0x4a280002,0x6b0000dc
-	.long	0x70ff4841,0x0c010004,0x6700003e,0x6e000094
-	.long	0x60000064,0x4a280002,0x6a0000c0,0x70ff4841
-	.long	0x0c010004,0x67000022,0x6e000078,0x60000048
-	.long	0xe3806400,0x00a64841,0x0c010004,0x6700000a
-	.long	0x6e000060,0x60000030,0x06a80000,0x01000004
-	.long	0x640ce4e8,0x0004e4e8,0x00065268,0x00004a80
-	.long	0x66060268,0xfe000006,0x02a8ffff,0xff000004
-	.long	0x42a80008,0x4e7552a8,0x0008641a,0x52a80004
-	.long	0x6414e4e8,0x0004e4e8,0x0006e4e8,0x0008e4e8
-	.long	0x000a5268,0x00004a80,0x66060228,0x00fe000b
-	.long	0x4e7506a8,0x00000800,0x0008641a,0x52a80004
-	.long	0x6414e4e8,0x0004e4e8,0x0006e4e8,0x0008e4e8
-	.long	0x000a5268,0x00004a80,0x66060268,0xf000000a
-	.long	0x02a8ffff,0xf8000008,0x4e754841,0x0c010004
-	.long	0x6700ff86,0x6eea4e75,0x48414a01,0x66044841
-	.long	0x4e7548e7,0x30000c01,0x00046622,0xe9e83602
-	.long	0x0004741e,0xe5ab2428,0x00040282,0x0000003f
-	.long	0x66284aa8,0x00086622,0x4a80661e,0x6020e9e8
-	.long	0x35420008,0x741ee5ab,0x24280008,0x02820000
-	.long	0x01ff6606,0x4a806602,0x600408c3,0x001d2003
-	.long	0x4cdf000c,0x48414e75,0x2f022f03,0x20280004
-	.long	0x22280008,0xedc02000,0x671ae5a8,0xe9c13022
-	.long	0x8083e5a9,0x21400004,0x21410008,0x2002261f
-	.long	0x241f4e75,0xedc12000,0xe5a90682,0x00000020
-	.long	0x21410004,0x42a80008,0x2002261f,0x241f4e75
-	.long	0xede80000,0x0004660e,0xede80000,0x00086700
-	.long	0x00740640,0x00204281,0x32280000,0x02417fff
-	.long	0xb0416e1c,0x92403028,0x00000240,0x80008240
-	.long	0x31410000,0x61ffffff,0xff82103c,0x00004e75
-	.long	0x0c010020,0x6e20e9e8,0x08400004,0x21400004
-	.long	0x20280008,0xe3a82140,0x00080268,0x80000000
-	.long	0x103c0004,0x4e750441,0x00202028,0x0008e3a8
-	.long	0x21400004,0x42a80008,0x02688000,0x0000103c
-	.long	0x00044e75,0x02688000,0x0000103c,0x00014e75
-	.long	0x30280000,0x02407fff,0x0c407fff,0x67480828
-	.long	0x00070004,0x6706103c,0x00004e75,0x4a406618
-	.long	0x4aa80004,0x660c4aa8,0x00086606,0x103c0001
-	.long	0x4e75103c,0x00044e75,0x4aa80004,0x66124aa8
-	.long	0x0008660c,0x02688000,0x0000103c,0x00014e75
-	.long	0x103c0006,0x4e754aa8,0x00086612,0x20280004
-	.long	0x02807fff,0xffff6606,0x103c0002,0x4e750828
-	.long	0x00060004,0x6706103c,0x00034e75,0x103c0005
-	.long	0x4e752028,0x00002200,0x02807ff0,0x0000670e
-	.long	0x0c807ff0,0x00006728,0x103c0000,0x4e750281
-	.long	0x000fffff,0x66ff0000,0x00144aa8,0x000466ff
-	.long	0x0000000a,0x103c0001,0x4e75103c,0x00044e75
-	.long	0x0281000f,0xffff66ff,0x00000014,0x4aa80004
-	.long	0x66ff0000,0x000a103c,0x00024e75,0x08010013
-	.long	0x66ff0000,0x000a103c,0x00054e75,0x103c0003
-	.long	0x4e752028,0x00002200,0x02807f80,0x0000670e
-	.long	0x0c807f80,0x0000671e,0x103c0000,0x4e750281
-	.long	0x007fffff,0x66ff0000,0x000a103c,0x00014e75
-	.long	0x103c0004,0x4e750281,0x007fffff,0x66ff0000
-	.long	0x000a103c,0x00024e75,0x08010016,0x66ff0000
-	.long	0x000a103c,0x00054e75,0x103c0003,0x4e752f01
-	.long	0x08280007,0x000056e8,0x00023228,0x00000241
-	.long	0x7fff9240,0x31410000,0x2f08202f,0x00040240
-	.long	0x00c0e848,0x61ffffff,0xfae22057,0x322f0006
-	.long	0x024100c0,0xe8494841,0x322f0006,0x02410030
-	.long	0xe84961ff,0xfffffc22,0x205f08a8,0x00070000
-	.long	0x4a280002,0x670a08e8,0x00070000,0x42280002
-	.long	0x42804aa8,0x0004660a,0x4aa80008,0x660408c0
-	.long	0x0002082e,0x0001ff66,0x670608ee,0x0005ff67
-	.long	0x588f4e75,0x2f010828,0x00070000,0x56e80002
-	.long	0x32280000,0x02417fff,0x92403141,0x00002f08
-	.long	0x428061ff,0xfffffa64,0x2057323c,0x00044841
-	.long	0x322f0006,0x02410030,0xe84961ff,0xfffffbaa
-	.long	0x205f08a8,0x00070000,0x4a280002,0x670a08e8
-	.long	0x00070000,0x42280002,0x42804aa8,0x0004660a
-	.long	0x4aa80008,0x660408c0,0x0002082e,0x0001ff66
-	.long	0x670608ee,0x0005ff67,0x588f4e75,0x02410010
-	.long	0xe8088200,0x3001e309,0x600e0241,0x00108200
-	.long	0x48408200,0x3001e309,0x103b0008,0x41fb1620
-	.long	0x4e750200,0x00020200,0x00020200,0x00020000
-	.long	0x00000a08,0x0a080a08,0x0a080a08,0x0a087fff
-	.long	0x00000000,0x00000000,0x00000000,0x00007ffe
-	.long	0x0000ffff,0xffffffff,0xffff0000,0x00007ffe
-	.long	0x0000ffff,0xffffffff,0xffff0000,0x00007fff
-	.long	0x00000000,0x00000000,0x00000000,0x00007fff
-	.long	0x00000000,0x00000000,0x00000000,0x0000407e
-	.long	0x0000ffff,0xff000000,0x00000000,0x0000407e
-	.long	0x0000ffff,0xff000000,0x00000000,0x00007fff
-	.long	0x00000000,0x00000000,0x00000000,0x00007fff
-	.long	0x00000000,0x00000000,0x00000000,0x000043fe
-	.long	0x0000ffff,0xffffffff,0xf8000000,0x000043fe
-	.long	0x0000ffff,0xffffffff,0xf8000000,0x00007fff
-	.long	0x00000000,0x00000000,0x00000000,0x00000000
-	.long	0x00000000,0x00000000,0x00000000,0x00000000
-	.long	0x00000000,0x00000000,0x00000000,0x00000000
-	.long	0x00000000,0x00000000,0x00000000,0x00000000
-	.long	0x00000000,0x00000000,0x00000000,0x0000ffff
-	.long	0x00000000,0x00000000,0x00000000,0x0000fffe
-	.long	0x0000ffff,0xffffffff,0xffff0000,0x0000ffff
-	.long	0x00000000,0x00000000,0x00000000,0x0000fffe
-	.long	0x0000ffff,0xffffffff,0xffff0000,0x0000ffff
-	.long	0x00000000,0x00000000,0x00000000,0x0000c07e
-	.long	0x0000ffff,0xff000000,0x00000000,0x0000ffff
-	.long	0x00000000,0x00000000,0x00000000,0x0000c07e
-	.long	0x0000ffff,0xff000000,0x00000000,0x0000ffff
-	.long	0x00000000,0x00000000,0x00000000,0x0000c3fe
-	.long	0x0000ffff,0xffffffff,0xf8000000,0x0000ffff
-	.long	0x00000000,0x00000000,0x00000000,0x0000c3fe
-	.long	0x0000ffff,0xffffffff,0xf8000000,0x0000700c
-	.long	0x61ffffff,0xe82c43ee,0xff6c700c,0x61ffffff
-	.long	0x38664a81,0x66ff0000,0x0a14e9ee,0x004fff6c
-	.long	0x0c407fff,0x66024e75,0x102eff6f,0x0200000f
-	.long	0x660e4aae,0xff706608,0x4aaeff74,0x66024e75
-	.long	0x41eeff6c,0x61ff0000,0x001cf22e,0xf080ff6c
-	.long	0x4e750000,0x00000203,0x02030203,0x03020302
-	.long	0x02032d68,0x0000ff84,0x2d680004,0xff882d68
-	.long	0x0008ff8c,0x41eeff84,0x48e73c00,0xf227e001
-	.long	0x74027604,0x28104281,0x4c3c1001,0x0000000a
-	.long	0xe9c408c4,0xd2805803,0x51caffee,0x0804001e
-	.long	0x67024481,0x04810000,0x00106c0e,0x44810084
-	.long	0x40000000,0x00904000,0x00002f01,0x7201f23c
-	.long	0x44000000,0x0000e9d0,0x0704f200,0x58222830
-	.long	0x1c007600,0x7407f23c,0x44234120,0x0000e9c4
-	.long	0x08c4f200,0x58225803,0x51caffec,0x52810c81
-	.long	0x00000002,0x6fd80810,0x001f6704,0xf200001a
-	.long	0x22170c81,0x0000001b,0x6f0000e4,0x0810001e
-	.long	0x66744281,0x2810e9c4,0x07046624,0x52817a01
-	.long	0x28305c00,0x66085081,0x52852830,0x5c004283
-	.long	0x7407e9c4,0x08c46608,0x58835281,0x51cafff4
-	.long	0x20012217,0x92806c10,0x44812810,0x00844000
-	.long	0x00000090,0x40000000,0x43fb0170,0x00000666
-	.long	0x4283f23c,0x44803f80,0x00007403,0xe2806406
-	.long	0xf23148a3,0x38000683,0x0000000c,0x4a8066ec
-	.long	0xf2000423,0x60684281,0x7a022830,0x5c006608
-	.long	0x53855081,0x28305c00,0x761c7407,0xe9c408c4
-	.long	0x66085983,0x528151ca,0xfff42001,0x22179280
-	.long	0x6e104481,0x28100284,0xbfffffff,0x0290bfff
-	.long	0xffff43fb,0x01700000,0x05fc4283,0xf23c4480
-	.long	0x3f800000,0x7403e280,0x6406f231,0x48a33800
-	.long	0x06830000,0x000c4a80,0x66ecf200,0x0420262e
-	.long	0xff60e9c3,0x26822810,0xe582e9c4,0x0002d480
-	.long	0x43fafe50,0x10312800,0x4283efc3,0x0682f203
-	.long	0x9000e280,0x640a43fb,0x01700000,0x06446016
-	.long	0xe280640a,0x43fb0170,0x000006d2,0x600843fb
-	.long	0x01700000,0x05902001,0x6a084480,0x00904000
-	.long	0x00004283,0xf23c4480,0x3f800000,0xe2806406
-	.long	0xf23148a3,0x38000683,0x0000000c,0x4a8066ec
-	.long	0x0810001e,0x6706f200,0x04206004,0xf2000423
-	.long	0xf200a800,0x08800009,0x6706006e,0x0108ff66
-	.long	0x588ff21f,0xd0404cdf,0x003cf23c,0x90000000
-	.long	0x0000f23c,0x88000000,0x00004e75,0x3ffd0000
-	.long	0x9a209a84,0xfbcff798,0x00000000,0x3ffd0000
-	.long	0x9a209a84,0xfbcff799,0x00000000,0x3f800000
-	.long	0x00000000,0x00000000,0x00000000,0x40000000
-	.long	0x00000000,0x00000000,0x00000000,0x41200000
-	.long	0x00000000,0x00000000,0x00000000,0x459a2800
-	.long	0x00000000,0x00000000,0x00000000,0x00000000
-	.long	0x03030202,0x03020203,0x02030302,0x48e73f20
-	.long	0xf227e007,0xf23c9000,0x00000020,0x2d50ff58
-	.long	0x2e00422e,0xff500c2e,0x0004ff4e,0x66000030
-	.long	0x30100240,0x7fff2228,0x00042428,0x00085340
-	.long	0xe38ae391,0x4a816cf6,0x4a406e04,0x50eeff50
-	.long	0x02407fff,0x30802141,0x00042142,0x00082d50
-	.long	0xff902d68,0x0004ff94,0x2d680008,0xff9802ae
-	.long	0x7fffffff,0xff904a2e,0xff506708,0x2c3cffff
-	.long	0xecbb6038,0x302eff90,0x3d7c3fff,0xff90f22e
-	.long	0x4800ff90,0x04403fff,0xf2005022,0xf23a4428
-	.long	0xff1cf293,0x000ef23a,0x4823ff02,0xf2066000
-	.long	0x600af23a,0x4823fee6,0xf2066000,0xf23c8800
-	.long	0x00000000,0x42454a87,0x6f042807,0x60062806
-	.long	0x98875284,0x4a846f18,0x0c840000,0x00116f12
-	.long	0x78114a87,0x6f0c00ae,0x00002080,0xff646002
-	.long	0x78014a87,0x6e06be86,0x6d022c07,0x20065280
-	.long	0x90844845,0x42454242,0x4a806c14,0x52450c80
-	.long	0xffffecd4,0x6e080680,0x00000018,0x74184480
-	.long	0xf23a4480,0xfe98e9ee,0x1682ff60,0xe349d245
-	.long	0xe3494aae,0xff586c02,0x528145fa,0xfec01632
-	.long	0x1800e98b,0xf2039000,0xe88b4a03,0x660a43fb
-	.long	0x01700000,0x03706016,0xe20b640a,0x43fb0170
-	.long	0x000003fe,0x600843fb,0x01700000,0x04904283
-	.long	0xe2886406,0xf23148a3,0x38000683,0x0000000c
-	.long	0x4a8066ec,0xf23c8800,0x00000000,0xf23c9000
-	.long	0x00000010,0xf2104800,0xf2000018,0x4a456608
-	.long	0xf2000420,0x6000008e,0x4a2eff50,0x67000072
-	.long	0xf227e002,0x36170243,0x7fff0050,0x8000d650
-	.long	0x04433fff,0xd6690024,0x04433fff,0xd6690030
-	.long	0x04433fff,0x6b000048,0x02578000,0x87570250
-	.long	0x7fff2f28,0x00082f28,0x00042f3c,0x3fff0000
-	.long	0xf21fd080,0xf21f4823,0x2f29002c,0x2f290028
-	.long	0x2f3c3fff,0x00002f29,0x00382f29,0x00342f3c
-	.long	0x3fff0000,0xf21f4823,0xf21f4823,0x601660fe
-	.long	0x4a42670c,0xf2294823,0x0024f229,0x48230030
-	.long	0xf2000423,0xf200a800,0xf22e6800,0xff9045ee
-	.long	0xff900800,0x0009670e,0x00aa0000,0x00010008
-	.long	0xf22e4800,0xff902d6e,0xff60ff54,0x02ae0000
-	.long	0x0030ff60,0x48e7c0c0,0x2f2eff54,0x2f2eff58
-	.long	0x41eeff90,0xf2106800,0x4aaeff58,0x6c060090
-	.long	0x80000000,0x2f2eff64,0xf22e9000,0xff60f23c
-	.long	0x88000000,0x0000f22e,0x4801ff90,0xf200a800
-	.long	0x816eff66,0x1d57ff64,0x588f2d5f,0xff582d5f
-	.long	0xff544cdf,0x03032d6e,0xff58ff90,0x2d6eff54
-	.long	0xff604845,0x4a4566ff,0x00000086,0xf23a4500
-	.long	0xfcec2004,0x53804283,0xe2886406,0xf2314923
-	.long	0x38000683,0x0000000c,0x4a8066ec,0x4a2eff50
-	.long	0x670af200,0x001860ff,0x00000028,0xf2000018
-	.long	0xf2000838,0xf293001a,0x53863a3c,0x0001f23c
-	.long	0x90000000,0x0020f23a,0x4523fcc2,0x6000fda8
-	.long	0xf23a4523,0xfcb8f200,0x0838f294,0x005cf292
-	.long	0x000cf23a,0x4420fca6,0x5286604c,0x52863a3c
-	.long	0x0001f23c,0x90000000,0x00206000,0xfd7af23a
-	.long	0x4500fc6a,0x20044283,0xe2886406,0xf2314923
-	.long	0x38000683,0x0000000c,0x4a8066ec,0xf2000018
-	.long	0xf2000838,0xf28e0012,0xf23a4420,0xfc605286
-	.long	0x5284f23a,0x4523fc56,0xf23c9000,0x00000010
-	.long	0xf2000820,0x41eeff84,0xf2106800,0x24280004
-	.long	0x26280008,0x42a80004,0x42a80008,0x20104840
-	.long	0x67140480,0x00003ffd,0x4a806e0a,0x4480e28a
-	.long	0xe29351c8,0xfffa4a82,0x66044a83,0x67104281
-	.long	0x06830000,0x0080d581,0x0283ffff,0xff802004
-	.long	0x568861ff,0x000002b0,0x4a2eff50,0x6728f200
-	.long	0x003af281,0x000cf206,0x4000f200,0x0018602e
-	.long	0x4a876d08,0xf23a4400,0xfbe46022,0xf2064000
-	.long	0xf2000018,0x6018f200,0x003af28e,0x000af23a
-	.long	0x4400fb9a,0x6008f206,0x4000f200,0x0018f229
-	.long	0x48200018,0xf22e6800,0xff90242a,0x0004262a
-	.long	0x00083012,0x670e0440,0x3ffd4440,0xe28ae293
-	.long	0x51c8fffa,0x42810683,0x00000080,0xd5810283
-	.long	0xffffff80,0x700441ee,0xff5461ff,0x00000228
-	.long	0x202eff54,0x720ce2a8,0xefee010c,0xff84e2a8
-	.long	0xefee0404,0xff844a00,0x670800ae,0x00002080
-	.long	0xff644280,0x022e000f,0xff844aae,0xff586c02
-	.long	0x70024a86,0x6c025280,0xefee0002,0xff84f23c
-	.long	0x88000000,0x0000f21f,0xd0e04cdf,0x04fc4e75
-	.long	0x40020000,0xa0000000,0x00000000,0x40050000
-	.long	0xc8000000,0x00000000,0x400c0000,0x9c400000
-	.long	0x00000000,0x40190000,0xbebc2000,0x00000000
-	.long	0x40340000,0x8e1bc9bf,0x04000000,0x40690000
-	.long	0x9dc5ada8,0x2b70b59e,0x40d30000,0xc2781f49
-	.long	0xffcfa6d5,0x41a80000,0x93ba47c9,0x80e98ce0
-	.long	0x43510000,0xaa7eebfb,0x9df9de8e,0x46a30000
-	.long	0xe319a0ae,0xa60e91c7,0x4d480000,0xc9767586
-	.long	0x81750c17,0x5a920000,0x9e8b3b5d,0xc53d5de5
-	.long	0x75250000,0xc4605202,0x8a20979b,0x40020000
-	.long	0xa0000000,0x00000000,0x40050000,0xc8000000
-	.long	0x00000000,0x400c0000,0x9c400000,0x00000000
-	.long	0x40190000,0xbebc2000,0x00000000,0x40340000
-	.long	0x8e1bc9bf,0x04000000,0x40690000,0x9dc5ada8
-	.long	0x2b70b59e,0x40d30000,0xc2781f49,0xffcfa6d6
-	.long	0x41a80000,0x93ba47c9,0x80e98ce0,0x43510000
-	.long	0xaa7eebfb,0x9df9de8e,0x46a30000,0xe319a0ae
-	.long	0xa60e91c7,0x4d480000,0xc9767586,0x81750c18
-	.long	0x5a920000,0x9e8b3b5d,0xc53d5de5,0x75250000
-	.long	0xc4605202,0x8a20979b,0x40020000,0xa0000000
-	.long	0x00000000,0x40050000,0xc8000000,0x00000000
-	.long	0x400c0000,0x9c400000,0x00000000,0x40190000
-	.long	0xbebc2000,0x00000000,0x40340000,0x8e1bc9bf
-	.long	0x04000000,0x40690000,0x9dc5ada8,0x2b70b59d
-	.long	0x40d30000,0xc2781f49,0xffcfa6d5,0x41a80000
-	.long	0x93ba47c9,0x80e98cdf,0x43510000,0xaa7eebfb
-	.long	0x9df9de8d,0x46a30000,0xe319a0ae,0xa60e91c6
-	.long	0x4d480000,0xc9767586,0x81750c17,0x5a920000
-	.long	0x9e8b3b5d,0xc53d5de4,0x75250000,0xc4605202
-	.long	0x8a20979a,0x48e7ff00,0x7e015380,0x28022a03
-	.long	0xe9c21003,0xe782e9c3,0x6003e783,0x8486e385
-	.long	0xe3944846,0xd346d685,0x4e71d584,0x4e71d346
-	.long	0x48464a47,0x67124847,0xe947de41,0x10c74847
-	.long	0x424751c8,0xffc86012,0x48473e01,0x48475247
-	.long	0x51c8ffba,0x4847e94f,0x10c74cdf,0x00ff4e75
-	.long	0x70016100,0x00d63d7c,0x0121000a,0x6000007e
-	.long	0x70026100,0x00c63d7c,0x0141000a,0x606e7004
-	.long	0x610000b8,0x3d7c0101,0x000a6060,0x70086100
-	.long	0x00aa3d7c,0x0161000a,0x6052700c,0x6100009c
-	.long	0x3d7c0161,0x000a6044,0x70016100,0x008e3d7c
-	.long	0x00a1000a,0x60367002,0x61000080,0x3d7c00c1
-	.long	0x000a6028,0x70046100,0x00723d7c,0x0081000a
-	.long	0x601a7008,0x61000064,0x3d7c00e1,0x000a600c
-	.long	0x700c6100,0x00563d7c,0x00e1000a,0x2d6eff68
-	.long	0x0006f22e,0xd0c0ffdc,0xf22e9c00,0xff604cee
-	.long	0x0303ff9c,0x4e5e2f17,0x2f6f0008,0x00042f6f
-	.long	0x000c0008,0x2f7c0000,0x0001000c,0x3f6f0006
-	.long	0x000c3f7c,0x40080006,0x08170005,0x670608ef
-	.long	0x0002000d,0x60ffffff,0x2d82122e,0xff410201
-	.long	0x00380c01,0x00186700,0x000c0c01,0x00206700
-	.long	0x00604e75,0x122eff41,0x02410007,0x323b1206
-	.long	0x4efb1002,0x00100016,0x001c0020,0x00240028
-	.long	0x002c0030,0x91aeffa4,0x4e7591ae,0xffa84e75
-	.long	0x95c04e75,0x97c04e75,0x99c04e75,0x9bc04e75
-	.long	0x91964e75,0x0c2e0030,0x000a6612,0x082e0005
-	.long	0x0004660a,0x4e7a8800,0x91c04e7b,0x88004e75
-	.long	0x448060a0,0x00000000,0x00000000,0x00000000
diff --git a/ANDROID_3.4.5/arch/m68k/ifpsp060/fskeleton.S b/ANDROID_3.4.5/arch/m68k/ifpsp060/fskeleton.S
deleted file mode 100644
index 0a1ae4f4..00000000
--- a/ANDROID_3.4.5/arch/m68k/ifpsp060/fskeleton.S
+++ /dev/null
@@ -1,342 +0,0 @@
-|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-|MOTOROLA MICROPROCESSOR & MEMORY TECHNOLOGY GROUP
-|M68000 Hi-Performance Microprocessor Division
-|M68060 Software Package
-|Production Release P1.00 -- October 10, 1994
-|
-|M68060 Software Package Copyright © 1993, 1994 Motorola Inc.  All rights reserved.
-|
-|THE SOFTWARE is provided on an "AS IS" basis and without warranty.
-|To the maximum extent permitted by applicable law,
-|MOTOROLA DISCLAIMS ALL WARRANTIES WHETHER EXPRESS OR IMPLIED,
-|INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
-|and any warranty against infringement with regard to the SOFTWARE
-|(INCLUDING ANY MODIFIED VERSIONS THEREOF) and any accompanying written materials.
-|
-|To the maximum extent permitted by applicable law,
-|IN NO EVENT SHALL MOTOROLA BE LIABLE FOR ANY DAMAGES WHATSOEVER
-|(INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS,
-|BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, OR OTHER PECUNIARY LOSS)
-|ARISING OF THE USE OR INABILITY TO USE THE SOFTWARE.
-|Motorola assumes no responsibility for the maintenance and support of the SOFTWARE.
-|
-|You are hereby granted a copyright license to use, modify, and distribute the SOFTWARE
-|so long as this entire notice is retained without alteration in any modified and/or
-|redistributed versions, and that such modified versions are clearly identified as such.
-|No licenses are granted by implication, estoppel or otherwise under any patents
-|or trademarks of Motorola, Inc.
-|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-| fskeleton.s
-|
-| This file contains:
-|	(1) example "Call-out"s
-|	(2) example package entry code
-|	(3) example "Call-out" table
-|
-
-#include <linux/linkage.h>
-
-|################################
-| (1) EXAMPLE CALL-OUTS		#
-|				#
-| _060_fpsp_done()		#
-| _060_real_ovfl()		#
-| _060_real_unfl()		#
-| _060_real_operr()		#
-| _060_real_snan()		#
-| _060_real_dz()		#
-| _060_real_inex()		#
-| _060_real_bsun()		#
-| _060_real_fline()		#
-| _060_real_fpu_disabled()	#
-| _060_real_trap()		#
-|################################
-
-|
-| _060_fpsp_done():
-|
-| This is the main exit point for the 68060 Floating-Point
-| Software Package. For a normal exit, all 060FPSP routines call this
-| routine. The operating system can do system dependent clean-up or
-| simply execute an "rte" as with the sample code below.
-|
-	.global		_060_fpsp_done
-_060_fpsp_done:
-	bral	 _060_isp_done	| do the same as isp_done
-
-|
-| _060_real_ovfl():
-|
-| This is the exit point for the 060FPSP when an enabled overflow exception
-| is present. The routine below should point to the operating system handler
-| for enabled overflow conditions. The exception stack frame is an overflow
-| stack frame. The FP state frame holds the EXCEPTIONAL OPERAND.
-|
-| The sample routine below simply clears the exception status bit and
-| does an "rte".
-|
-	.global		_060_real_ovfl
-_060_real_ovfl:
-	fsave		-(%sp)
-	move.w		#0x6000,0x2(%sp)
-	frestore	(%sp)+
-	bral		trap	| jump to trap handler
-
-
-|
-| _060_real_unfl():
-|
-| This is the exit point for the 060FPSP when an enabled underflow exception
-| is present. The routine below should point to the operating system handler
-| for enabled underflow conditions. The exception stack frame is an underflow
-| stack frame. The FP state frame holds the EXCEPTIONAL OPERAND.
-|
-| The sample routine below simply clears the exception status bit and
-| does an "rte".
-|
-	.global		_060_real_unfl
-_060_real_unfl:
-	fsave		-(%sp)
-	move.w		#0x6000,0x2(%sp)
-	frestore	(%sp)+
-	bral		trap	| jump to trap handler
-
-|
-| _060_real_operr():
-|
-| This is the exit point for the 060FPSP when an enabled operand error exception
-| is present. The routine below should point to the operating system handler
-| for enabled operand error exceptions. The exception stack frame is an operand error
-| stack frame. The FP state frame holds the source operand of the faulting
-| instruction.
-|
-| The sample routine below simply clears the exception status bit and
-| does an "rte".
-|
-	.global		_060_real_operr
-_060_real_operr:
-	fsave		-(%sp)
-	move.w		#0x6000,0x2(%sp)
-	frestore	(%sp)+
-	bral		trap	| jump to trap handler
-
-|
-| _060_real_snan():
-|
-| This is the exit point for the 060FPSP when an enabled signalling NaN exception
-| is present. The routine below should point to the operating system handler
-| for enabled signalling NaN exceptions. The exception stack frame is a signalling NaN
-| stack frame. The FP state frame holds the source operand of the faulting
-| instruction.
-|
-| The sample routine below simply clears the exception status bit and
-| does an "rte".
-|
-	.global		_060_real_snan
-_060_real_snan:
-	fsave		-(%sp)
-	move.w		#0x6000,0x2(%sp)
-	frestore	(%sp)+
-	bral		trap	| jump to trap handler
-
-|
-| _060_real_dz():
-|
-| This is the exit point for the 060FPSP when an enabled divide-by-zero exception
-| is present. The routine below should point to the operating system handler
-| for enabled divide-by-zero exceptions. The exception stack frame is a divide-by-zero
-| stack frame. The FP state frame holds the source operand of the faulting
-| instruction.
-|
-| The sample routine below simply clears the exception status bit and
-| does an "rte".
-|
-	.global		_060_real_dz
-_060_real_dz:
-	fsave		-(%sp)
-	move.w		#0x6000,0x2(%sp)
-	frestore	(%sp)+
-	bral		trap	| jump to trap handler
-
-|
-| _060_real_inex():
-|
-| This is the exit point for the 060FPSP when an enabled inexact exception
-| is present. The routine below should point to the operating system handler
-| for enabled inexact exceptions. The exception stack frame is an inexact
-| stack frame. The FP state frame holds the source operand of the faulting
-| instruction.
-|
-| The sample routine below simply clears the exception status bit and
-| does an "rte".
-|
-	.global		_060_real_inex
-_060_real_inex:
-	fsave		-(%sp)
-	move.w		#0x6000,0x2(%sp)
-	frestore	(%sp)+
-	bral		trap	| jump to trap handler
-
-|
-| _060_real_bsun():
-|
-| This is the exit point for the 060FPSP when an enabled bsun exception
-| is present. The routine below should point to the operating system handler
-| for enabled bsun exceptions. The exception stack frame is a bsun
-| stack frame.
-|
-| The sample routine below clears the exception status bit, clears the NaN
-| bit in the FPSR, and does an "rte". The instruction that caused the
-| bsun will now be re-executed but with the NaN FPSR bit cleared.
-|
-	.global		_060_real_bsun
-_060_real_bsun:
-|	fsave		-(%sp)
-
-	fmove.l		%fpsr,-(%sp)
-	andi.b		#0xfe,(%sp)
-	fmove.l		(%sp)+,%fpsr
-
-	bral		trap	| jump to trap handler
-
-|
-| _060_real_fline():
-|
-| This is the exit point for the 060FPSP when an F-Line Illegal exception is
-| encountered. Three different types of exceptions can enter the F-Line exception
-| vector number 11: FP Unimplemented Instructions, FP implemented instructions when
-| the FPU is disabled, and F-Line Illegal instructions. The 060FPSP module
-| _fpsp_fline() distinguishes between the three and acts appropriately. F-Line
-| Illegals branch here.
-|
-	.global		_060_real_fline
-_060_real_fline:
-	bral		trap	| jump to trap handler
-
-|
-| _060_real_fpu_disabled():
-|
-| This is the exit point for the 060FPSP when an FPU disabled exception is
-| encountered. Three different types of exceptions can enter the F-Line exception
-| vector number 11: FP Unimplemented Instructions, FP implemented instructions when
-| the FPU is disabled, and F-Line Illegal instructions. The 060FPSP module
-| _fpsp_fline() distinguishes between the three and acts appropriately. FPU disabled
-| exceptions branch here.
-|
-| The sample code below enables the FPU, sets the PC field in the exception stack
-| frame to the PC of the instruction causing the exception, and does an "rte".
-| The execution of the instruction then proceeds with an enabled floating-point
-| unit.
-|
-	.global		_060_real_fpu_disabled
-_060_real_fpu_disabled:
-	move.l		%d0,-(%sp)		| enabled the fpu
-	.long	0x4E7A0808			|movec		pcr,%d0
-	bclr		#0x1,%d0
-	.long	0x4E7B0808			|movec		%d0,pcr
-	move.l		(%sp)+,%d0
-
-	move.l		0xc(%sp),0x2(%sp)	| set "Current PC"
-	rte
-
-|
-| _060_real_trap():
-|
-| This is the exit point for the 060FPSP when an emulated "ftrapcc" instruction
-| discovers that the trap condition is true and it should branch to the operating
-| system handler for the trap exception vector number 7.
-|
-| The sample code below simply executes an "rte".
-|
-	.global		_060_real_trap
-_060_real_trap:
-	bral		trap	| jump to trap handler
-
-|############################################################################
-
-|#################################
-| (2) EXAMPLE PACKAGE ENTRY CODE #
-|#################################
-
-	.global		_060_fpsp_snan
-_060_fpsp_snan:
-	bra.l		_FP_CALL_TOP+0x80+0x00
-
-	.global		_060_fpsp_operr
-_060_fpsp_operr:
-	bra.l		_FP_CALL_TOP+0x80+0x08
-
-	.global		_060_fpsp_ovfl
-_060_fpsp_ovfl:
-	bra.l		_FP_CALL_TOP+0x80+0x10
-
-	.global		_060_fpsp_unfl
-_060_fpsp_unfl:
-	bra.l		_FP_CALL_TOP+0x80+0x18
-
-	.global		_060_fpsp_dz
-_060_fpsp_dz:
-	bra.l		_FP_CALL_TOP+0x80+0x20
-
-	.global		_060_fpsp_inex
-_060_fpsp_inex:
-	bra.l		_FP_CALL_TOP+0x80+0x28
-
-	.global		_060_fpsp_fline
-_060_fpsp_fline:
-	bra.l		_FP_CALL_TOP+0x80+0x30
-
-	.global		_060_fpsp_unsupp
-_060_fpsp_unsupp:
-	bra.l		_FP_CALL_TOP+0x80+0x38
-
-	.global		_060_fpsp_effadd
-_060_fpsp_effadd:
-	bra.l		_FP_CALL_TOP+0x80+0x40
-
-|############################################################################
-
-|###############################
-| (3) EXAMPLE CALL-OUT SECTION #
-|###############################
-
-| The size of this section MUST be 128 bytes!!!
-
-_FP_CALL_TOP:
-	.long	_060_real_bsun		- _FP_CALL_TOP
-	.long	_060_real_snan		- _FP_CALL_TOP
-	.long	_060_real_operr		- _FP_CALL_TOP
-	.long	_060_real_ovfl		- _FP_CALL_TOP
-	.long	_060_real_unfl		- _FP_CALL_TOP
-	.long	_060_real_dz		- _FP_CALL_TOP
-	.long	_060_real_inex		- _FP_CALL_TOP
-	.long	_060_real_fline		- _FP_CALL_TOP
-	.long	_060_real_fpu_disabled	- _FP_CALL_TOP
-	.long	_060_real_trap		- _FP_CALL_TOP
-	.long	_060_real_trace		- _FP_CALL_TOP
-	.long	_060_real_access	- _FP_CALL_TOP
-	.long	_060_fpsp_done		- _FP_CALL_TOP
-
-	.long	0x00000000, 0x00000000, 0x00000000
-
-	.long	_060_imem_read		- _FP_CALL_TOP
-	.long	_060_dmem_read		- _FP_CALL_TOP
-	.long	_060_dmem_write		- _FP_CALL_TOP
-	.long	_060_imem_read_word	- _FP_CALL_TOP
-	.long	_060_imem_read_long	- _FP_CALL_TOP
-	.long	_060_dmem_read_byte	- _FP_CALL_TOP
-	.long	_060_dmem_read_word	- _FP_CALL_TOP
-	.long	_060_dmem_read_long	- _FP_CALL_TOP
-	.long	_060_dmem_write_byte	- _FP_CALL_TOP
-	.long	_060_dmem_write_word	- _FP_CALL_TOP
-	.long	_060_dmem_write_long	- _FP_CALL_TOP
-
-	.long	0x00000000
-
-	.long	0x00000000, 0x00000000, 0x00000000, 0x00000000
-
-|############################################################################
-
-| 060 FPSP KERNEL PACKAGE NEEDS TO GO HERE!!!
-
-#include "fpsp.sa"
diff --git a/ANDROID_3.4.5/arch/m68k/ifpsp060/ftest.sa b/ANDROID_3.4.5/arch/m68k/ifpsp060/ftest.sa
deleted file mode 100644
index b365bc2f..00000000
--- a/ANDROID_3.4.5/arch/m68k/ifpsp060/ftest.sa
+++ /dev/null
@@ -1,371 +0,0 @@
-	dc.l	$60ff0000,$00d40000,$60ff0000,$016c0000
-	dc.l	$60ff0000,$01a80000,$54657374,$696e6720
-	dc.l	$36383036,$30204650,$53502073,$74617274
-	dc.l	$65643a0a,$00546573,$74696e67,$20363830
-	dc.l	$36302046,$50535020,$756e696d,$706c656d
-	dc.l	$656e7465,$6420696e,$73747275,$6374696f
-	dc.l	$6e207374,$61727465,$643a0a00,$54657374
-	dc.l	$696e6720,$36383036,$30204650,$53502065
-	dc.l	$78636570,$74696f6e,$20656e61,$626c6564
-	dc.l	$20737461,$72746564,$3a0a0070,$61737365
-	dc.l	$640a0020,$6661696c,$65640a00,$4a80660e
-	dc.l	$487affe9,$61ff0000,$1642588f,$4e752f01
-	dc.l	$61ff0000,$164c588f,$487affd9,$61ff0000
-	dc.l	$162a588f,$4e754e56,$fe8048e7,$3f3cf227
-	dc.l	$e0ff487a,$ff3461ff,$00001610,$588f42ae
-	dc.l	$fea0487b,$01700000,$058061ff,$000015fc
-	dc.l	$588f61ff,$00000588,$61ffffff,$ffa242ae
-	dc.l	$fea0487b,$01700000,$126c61ff,$000015dc
-	dc.l	$588f61ff,$00001280,$61ffffff,$ff8242ae
-	dc.l	$fea0487b,$01700000,$0b6461ff,$000015bc
-	dc.l	$61ff0000,$0b7261ff,$ffffff64,$42aefea0
-	dc.l	$487b0170,$00000de2,$61ff0000,$159e61ff
-	dc.l	$00000df0,$61ffffff,$ff464cdf,$3cfcf21f
-	dc.l	$d0ff4e5e,$4e754e56,$fe8048e7,$3f3cf227
-	dc.l	$e0ff487a,$feb161ff,$00001570,$588f42ae
-	dc.l	$fea0487b,$01700000,$00fe61ff,$0000155c
-	dc.l	$588f61ff,$00000110,$61ffffff,$ff024cdf
-	dc.l	$3cfcf21f,$d0ff4e5e,$4e754e56,$fe8048e7
-	dc.l	$3f3cf227,$e0ff487a,$fea461ff,$0000152c
-	dc.l	$588f42ae,$fea0487b,$01700000,$0f1461ff
-	dc.l	$00001518,$61ff0000,$0f1a61ff,$fffffec0
-	dc.l	$42aefea0,$487b0170,$00000fd2,$61ff0000
-	dc.l	$14fa61ff,$00000fd8,$61ffffff,$fea242ae
-	dc.l	$fea0487b,$01700000,$0b6061ff,$000014dc
-	dc.l	$61ff0000,$0b6a61ff,$fffffe84,$42aefea0
-	dc.l	$487b0170,$00000c22,$61ff0000,$14be61ff
-	dc.l	$00000c2c,$61ffffff,$fe6642ae,$fea0487b
-	dc.l	$01700000,$105661ff,$000014a0,$61ff0000
-	dc.l	$105a61ff,$fffffe48,$42aefea0,$487b0170
-	dc.l	$00000da2,$61ff0000,$148261ff,$00000da8
-	dc.l	$61ffffff,$fe2a4cdf,$3cfcf21f,$d0ff4e5e
-	dc.l	$4e750955,$6e696d70,$6c656d65,$6e746564
-	dc.l	$20465020,$696e7374,$72756374,$696f6e73
-	dc.l	$2e2e2e00,$52aefea0,$4cfb3fff,$01700000
-	dc.l	$1390f23b,$d0ff0170,$000013c6,$f23b9c00
-	dc.l	$01700000,$141c3d7c,$0000fea6,$48ee7fff
-	dc.l	$ff80f22e,$f0ffff20,$f22ebc00,$feb42d7c
-	dc.l	$40000000,$fe802d7c,$c90fdaa2,$fe842d7c
-	dc.l	$2168c235,$fe8844fc,$0000f22e,$480efe80
-	dc.l	$42eefea4,$48ee7fff,$ffc0f22e,$f0fffec0
-	dc.l	$f22ebc00,$fea82d7c,$bfbf0000,$ff202d7c
-	dc.l	$80000000,$ff242d7c,$00000000,$ff282d7c
-	dc.l	$08000208,$feb841fa,$ffc22d48,$febc61ff
-	dc.l	$00001288,$4a0066ff,$000012ae,$61ff0000
-	dc.l	$12b04a00,$66ff0000,$12a052ae,$fea04cfb
-	dc.l	$3fff0170,$000012da,$f23bd0ff,$01700000
-	dc.l	$1310f23b,$9c000170,$00001366,$3d7c0000
-	dc.l	$fea648ee,$7fffff80,$f22ef0ff,$ff20f22e
-	dc.l	$bc00feb4,$2d7c3ffe,$0000fe80,$2d7cc90f
-	dc.l	$daa2fe84,$2d7c2168,$c235fe88,$44fc0000
-	dc.l	$f22e480f,$fe8042ee,$fea448ee,$7fffffc0
-	dc.l	$f22ef0ff,$fec0f22e,$bc00fea8,$2d7c3fff
-	dc.l	$0000ff20,$2d7c8000,$0000ff24,$2d7c0000
-	dc.l	$0000ff28,$2d7c0000,$0208feb8,$41faffc2
-	dc.l	$2d48febc,$61ff0000,$11d24a00,$66ff0000
-	dc.l	$11f861ff,$000011fa,$4a0066ff,$000011ea
-	dc.l	$52aefea0,$4cfb3fff,$01700000,$1224f23b
-	dc.l	$d0ff0170,$0000125a,$f23b9c00,$01700000
-	dc.l	$12b03d7c,$0000fea6,$48ee7fff,$ff80f22e
-	dc.l	$f0ffff20,$f22ebc00,$feb444fc,$0000f200
-	dc.l	$5c3142ee,$fea448ee,$7fffffc0,$f22ef0ff
-	dc.l	$fec0f22e,$bc00fea8,$2d7c4000,$0000ff20
-	dc.l	$2d7c935d,$8dddff24,$2d7caaa8,$ac17ff28
-	dc.l	$2d7c0000,$0208feb8,$41faffc4,$2d48febc
-	dc.l	$61ff0000,$11364a00,$66ff0000,$115c61ff
-	dc.l	$0000115e,$4a0066ff,$0000114e,$52aefea0
-	dc.l	$4cfb3fff,$01700000,$1188f23b,$d0ff0170
-	dc.l	$000011be,$f23b9c00,$01700000,$1214f23c
-	dc.l	$88000f00,$00007e00,$3d7c0000,$fea648ee
-	dc.l	$7fffff80,$f22ef0ff,$ff20f22e,$bc00feb4
-	dc.l	$44fc0000,$f2470012,$42eefea4,$48ee7fff
-	dc.l	$ffc0f22e,$f0fffec0,$f22ebc00,$fea82d7c
-	dc.l	$0f008080,$feb841fa,$ffdc2d48,$febc61ff
-	dc.l	$000010a8,$4a0066ff,$000010ce,$61ff0000
-	dc.l	$10d04a00,$66ff0000,$10c052ae,$fea04cfb
-	dc.l	$3fff0170,$000010fa,$f23bd0ff,$01700000
-	dc.l	$1130f23b,$9c000170,$00001186,$f23c8800
-	dc.l	$0f000000,$7e023d7c,$0000fea6,$48ee7fff
-	dc.l	$ff80f22e,$f0ffff20,$f22ebc00,$feb444fc
-	dc.l	$0000f24f,$0012fffc,$42eefea4,$48ee7fff
-	dc.l	$ffc0f22e,$f0fffec0,$f22ebc00,$fea83d7c
-	dc.l	$ffffff9e,$2d7c0f00,$8080feb8,$41faffd4
-	dc.l	$2d48febc,$61ff0000,$10124a00,$66ff0000
-	dc.l	$103861ff,$0000103a,$4a0066ff,$0000102a
-	dc.l	$52aefea0,$4cfb3fff,$01700000,$1064f23b
-	dc.l	$d0ff0170,$0000109a,$f23b9c00,$01700000
-	dc.l	$10f0f23c,$88000f00,$00003d7c,$0000fea6
-	dc.l	$48ee7fff,$ff80f22e,$f0ffff20,$f22ebc00
-	dc.l	$feb444fc,$0000f27b,$0012abcd,$ef0142ee
-	dc.l	$fea448ee,$7fffffc0,$f22ef0ff,$fec0f22e
-	dc.l	$bc00fea8,$2d7c0f00,$8080feb8,$41faffd8
-	dc.l	$2d48febc,$61ff0000,$0f824a00,$66ff0000
-	dc.l	$0fa861ff,$00000faa,$4a0066ff,$00000f9a
-	dc.l	$42804e75,$09556e69,$6d706c65,$6d656e74
-	dc.l	$6564203c,$65613e2e,$2e2e0000,$52aefea0
-	dc.l	$4cfb3fff,$01700000,$0fb8f23b,$d0ff0170
-	dc.l	$00000fee,$f23b9c00,$01700000,$10443d7c
-	dc.l	$0000fea6,$48ee7fff,$ff80f22e,$f0ffff20
-	dc.l	$f22ebc00,$feb4f23c,$58000002,$44fc0000
-	dc.l	$f23c4823,$c0000000,$80000000,$00000000
-	dc.l	$42eefea4,$48ee7fff,$ffc0f22e,$f0fffec0
-	dc.l	$f22ebc00,$fea82d7c,$c0010000,$ff202d7c
-	dc.l	$80000000,$ff242d7c,$00000000,$ff282d7c
-	dc.l	$08000000,$feb841fa,$ffb82d48,$febc61ff
-	dc.l	$00000eb8,$4a0066ff,$00000ede,$61ff0000
-	dc.l	$0ee04a00,$66ff0000,$0ed052ae,$fea04cfb
-	dc.l	$3fff0170,$00000f0a,$f23bd0ff,$01700000
-	dc.l	$0f40f23b,$9c000170,$00000f96,$3d7c0000
-	dc.l	$fea648ee,$7fffff80,$f22ef0ff,$ff20f22e
-	dc.l	$bc00feb4,$44fc0000,$f23c4c18,$c1230001
-	dc.l	$23456789,$12345678,$42eefea4,$48ee7fff
-	dc.l	$ffc0f22e,$f0fffec0,$f22ebc00,$fea82d7c
-	dc.l	$3e660000,$ff202d7c,$d0ed23e8,$ff242d7c
-	dc.l	$d14035bc,$ff282d7c,$00000108,$feb841fa
-	dc.l	$ffb82d48,$febc61ff,$00000e10,$4a0066ff
-	dc.l	$00000e36,$61ff0000,$0e384a00,$66ff0000
-	dc.l	$0e2852ae,$fea04cfb,$3fff0170,$00000e62
-	dc.l	$f23bd0ff,$01700000,$0e98f23b,$9c000170
-	dc.l	$00000eee,$3d7c0000,$fea644fc,$000048ee
-	dc.l	$7fffff80,$f22ef0ff,$ff20f22e,$bc00feb4
-	dc.l	$f23c9800,$ffffffff,$ffffffff,$42eefea4
-	dc.l	$48ee7fff,$ffc0f22e,$f0fffec0,$f22ebc00
-	dc.l	$fea82d7c,$0000fff0,$feb42d7c,$0ffffff8
-	dc.l	$feb861ff,$00000d84,$4a0066ff,$00000daa
-	dc.l	$61ff0000,$0dac4a00,$66ff0000,$0d9c52ae
-	dc.l	$fea04cfb,$3fff0170,$00000dd6,$f23bd0ff
-	dc.l	$01700000,$0e0cf23b,$9c000170,$00000e62
-	dc.l	$3d7c0000,$fea644fc,$000048ee,$7fffff80
-	dc.l	$f22ef0ff,$ff20f22e,$bc00feb4,$f23c9400
-	dc.l	$ffffffff,$ffffffff,$42eefea4,$48ee7fff
-	dc.l	$ffc0f22e,$f0fffec0,$f22ebc00,$fea82d7c
-	dc.l	$0000fff0,$feb42d7c,$ffffffff,$febc61ff
-	dc.l	$00000cf8,$4a0066ff,$00000d1e,$61ff0000
-	dc.l	$0d204a00,$66ff0000,$0d1052ae,$fea04cfb
-	dc.l	$3fff0170,$00000d4a,$f23bd0ff,$01700000
-	dc.l	$0d80f23b,$9c000170,$00000dd6,$3d7c0000
-	dc.l	$fea644fc,$000048ee,$7fffff80,$f22ef0ff
-	dc.l	$ff20f22e,$bc00feb4,$f23c8c00,$ffffffff
-	dc.l	$ffffffff,$42eefea4,$48ee7fff,$ffc0f22e
-	dc.l	$f0fffec0,$f22ebc00,$fea82d7c,$0ffffff8
-	dc.l	$feb82d7c,$ffffffff,$febc61ff,$00000c6c
-	dc.l	$4a0066ff,$00000c92,$61ff0000,$0c944a00
-	dc.l	$66ff0000,$0c8452ae,$fea04cfb,$3fff0170
-	dc.l	$00000cbe,$f23bd0ff,$01700000,$0cf4f23b
-	dc.l	$9c000170,$00000d4a,$3d7c0000,$fea644fc
-	dc.l	$000048ee,$7fffff80,$f22ef0ff,$ff20f22e
-	dc.l	$bc00feb4,$f23c9c00,$ffffffff,$ffffffff
-	dc.l	$ffffffff,$42eefea4,$48ee7fff,$ffc0f22e
-	dc.l	$f0fffec0,$f22ebc00,$fea82d7c,$0000fff0
-	dc.l	$feb42d7c,$0ffffff8,$feb82d7c,$ffffffff
-	dc.l	$febc61ff,$00000bd4,$4a0066ff,$00000bfa
-	dc.l	$61ff0000,$0bfc4a00,$66ff0000,$0bec52ae
-	dc.l	$fea04cfb,$3fff0170,$00000c26,$f23bd0ff
-	dc.l	$01700000,$0c5cf23b,$9c000170,$00000cb2
-	dc.l	$f23c5800,$0001f23c,$58800002,$f23c5900
-	dc.l	$0003f23c,$59800004,$f23c5a00,$0005f23c
-	dc.l	$5a800006,$f23c5b00,$0007f23c,$5b800008
-	dc.l	$f23c8400,$00000000,$70aa3d7c,$0000fea6
-	dc.l	$48eeffff,$ff80f22e,$bc00feb4,$f22ef0ff
-	dc.l	$ff2044fc,$0000f227,$e80042ee,$fea4f22e
-	dc.l	$bc00fea8,$f23c4480,$7f800000,$f23c4580
-	dc.l	$7f800000,$f23c4680,$7f800000,$f23c4780
-	dc.l	$7f800000,$f21f4880,$f21f4980,$f21f4a80
-	dc.l	$f21f4b80,$48eeffff,$ffc0f22e,$f0fffec0
-	dc.l	$61ff0000,$0af64a00,$66ff0000,$0b1c61ff
-	dc.l	$00000b1e,$4a0066ff,$00000b0e,$52aefea0
-	dc.l	$4cfb3fff,$01700000,$0b48f23b,$d0ff0170
-	dc.l	$00000b7e,$f23b9c00,$01700000,$0bd4f23c
-	dc.l	$58000001,$f23c5880,$0002f23c,$59000003
-	dc.l	$f23c5980,$0004f23c,$5a000005,$f23c5a80
-	dc.l	$0006f23c,$5b000007,$f23c5b80,$0008f227
-	dc.l	$6b00f227,$6a00f227,$6900f227,$6800f22e
-	dc.l	$f0ffff20,$f23c4700,$7f800000,$f23c4600
-	dc.l	$7f800000,$f23c4500,$7f800000,$f23c4400
-	dc.l	$7f800000,$f23c8400,$00000000,$f23c8800
-	dc.l	$00000000,$70aa3d7c,$0000fea6,$48eeffff
-	dc.l	$ff80f22e,$bc00feb4,$44fc0000,$f21fd800
-	dc.l	$42eefea4,$f22ebc00,$fea848ee,$ffffffc0
-	dc.l	$f22ef0ff,$fec061ff,$00000a10,$4a0066ff
-	dc.l	$00000a36,$61ff0000,$0a384a00,$66ff0000
-	dc.l	$0a2852ae,$fea04cfb,$3fff0170,$00000a62
-	dc.l	$f23bd0ff,$01700000,$0a98f23b,$9c000170
-	dc.l	$00000aee,$f23c5800,$0001f23c,$58800002
-	dc.l	$f23c5900,$0003f23c,$59800004,$f23c5a00
-	dc.l	$0005f23c,$5a800006,$f23c5b00,$0007f23c
-	dc.l	$5b800008,$f23c8400,$00000000,$203cffff
-	dc.l	$ff003d7c,$0000fea6,$48eeffff,$ff80f22e
-	dc.l	$bc00feb4,$f22ef0ff,$ff2044fc,$0000f227
-	dc.l	$e80042ee,$fea4f22e,$bc00fea8,$48eeffff
-	dc.l	$ffc0f22e,$f0fffec0,$61ff0000,$095e4a00
-	dc.l	$66ff0000,$098461ff,$00000986,$4a0066ff
-	dc.l	$00000976,$42804e75,$094e6f6e,$2d6d6173
-	dc.l	$6b61626c,$65206f76,$6572666c,$6f772e2e
-	dc.l	$2e0051fc,$52aefea0,$4cfb3fff,$01700000
-	dc.l	$0990f23b,$d0ff0170,$000009c6,$f23b9c00
-	dc.l	$01700000,$0a1c3d7c,$0000fea6,$48ee7fff
-	dc.l	$ff80f22e,$f0ffff20,$f22ebc00,$feb4f23c
-	dc.l	$58000002,$2d7c7ffe,$0000fe80,$2d7c8000
-	dc.l	$0000fe84,$2d7c0000,$0000fe88,$44fc0000
-	dc.l	$f22e4823,$fe8042ee,$fea448ee,$7fffffc0
-	dc.l	$f22ef0ff,$fec0f22e,$bc00fea8,$2d7c7fff
-	dc.l	$0000ff20,$2d7c0000,$0000ff24,$2d7c0000
-	dc.l	$0000ff28,$2d7c0200,$1048feb8,$41faffc2
-	dc.l	$2d48febc,$61ff0000,$08824a00,$66ff0000
-	dc.l	$08a861ff,$000008aa,$4a0066ff,$0000089a
-	dc.l	$42804e75,$09456e61,$626c6564,$206f7665
-	dc.l	$72666c6f,$772e2e2e,$000051fc,$52aefea0
-	dc.l	$4cfb3fff,$01700000,$08b8f23b,$d0ff0170
-	dc.l	$000008ee,$f23b9c00,$01700000,$09443d7c
-	dc.l	$0000fea6,$48ee7fff,$ff80f22e,$f0ffff20
-	dc.l	$f23c9000,$00001000,$f22ebc00,$feb4f23c
-	dc.l	$58000002,$2d7c7ffe,$0000fe80,$2d7c8000
-	dc.l	$0000fe84,$2d7c0000,$0000fe88,$44fc0000
-	dc.l	$f22e4823,$fe8042ee,$fea448ee,$7fffffc0
-	dc.l	$f22ef0ff,$fec0f22e,$bc00fea8,$2d7c7fff
-	dc.l	$0000ff20,$2d7c0000,$0000ff24,$2d7c0000
-	dc.l	$0000ff28,$2d7c0200,$1048feb8,$41faffc2
-	dc.l	$2d48febc,$61ff0000,$07a24a00,$66ff0000
-	dc.l	$07c861ff,$000007ca,$4a0066ff,$000007ba
-	dc.l	$42804e75,$09456e61,$626c6564,$20756e64
-	dc.l	$6572666c,$6f772e2e,$2e0051fc,$52aefea0
-	dc.l	$4cfb3fff,$01700000,$07d8f23b,$d0ff0170
-	dc.l	$0000080e,$f23b9c00,$01700000,$08643d7c
-	dc.l	$0000fea6,$48ee7fff,$ff80f22e,$f0ffff20
-	dc.l	$f23c9000,$00000800,$f22ebc00,$feb42d7c
-	dc.l	$00000000,$fe802d7c,$80000000,$fe842d7c
-	dc.l	$00000000,$fe88f22e,$d080fe80,$44fc0000
-	dc.l	$f23c5820,$000242ee,$fea448ee,$7fffffc0
-	dc.l	$f22ef0ff,$fec0f22e,$bc00fea8,$2d7c0000
-	dc.l	$0000ff20,$2d7c4000,$0000ff24,$2d7c0000
-	dc.l	$0000ff28,$2d7c0000,$0800feb8,$41faffc2
-	dc.l	$2d48febc,$61ff0000,$06c24a00,$66ff0000
-	dc.l	$06e861ff,$000006ea,$4a0066ff,$000006da
-	dc.l	$42804e75,$094e6f6e,$2d6d6173,$6b61626c
-	dc.l	$6520756e,$64657266,$6c6f772e,$2e2e0000
-	dc.l	$52aefea0,$4cfb3fff,$01700000,$06f4f23b
-	dc.l	$d0ff0170,$0000072a,$f23b9c00,$01700000
-	dc.l	$07803d7c,$0000fea6,$48ee7fff,$ff80f22e
-	dc.l	$f0ffff20,$f22ebc00,$feb42d7c,$00000000
-	dc.l	$fe802d7c,$80000000,$fe842d7c,$00000000
-	dc.l	$fe88f22e,$d080fe80,$44fc0000,$f23c5820
-	dc.l	$000242ee,$fea448ee,$7fffffc0,$f22ef0ff
-	dc.l	$fec0f22e,$bc00fea8,$2d7c0000,$0000ff20
-	dc.l	$2d7c4000,$0000ff24,$2d7c0000,$0000ff28
-	dc.l	$2d7c0000,$0800feb8,$41faffc2,$2d48febc
-	dc.l	$61ff0000,$05e64a00,$66ff0000,$060c61ff
-	dc.l	$0000060e,$4a0066ff,$000005fe,$42804e75
-	dc.l	$09456e61,$626c6564,$20696e65,$78616374
-	dc.l	$2e2e2e00,$52aefea0,$4cfb3fff,$01700000
-	dc.l	$0620f23b,$d0ff0170,$00000656,$f23b9c00
-	dc.l	$01700000,$06ac3d7c,$0000fea6,$48ee7fff
-	dc.l	$ff80f22e,$f0ffff20,$f23c9000,$00000200
-	dc.l	$f22ebc00,$feb42d7c,$50000000,$fe802d7c
-	dc.l	$80000000,$fe842d7c,$00000000,$fe88f22e
-	dc.l	$d080fe80,$44fc0000,$f23c5822,$000242ee
-	dc.l	$fea448ee,$7fffffc0,$f22ef0ff,$fec0f22e
-	dc.l	$bc00fea8,$2d7c5000,$0000ff20,$2d7c8000
-	dc.l	$0000ff24,$2d7c0000,$0000ff28,$2d7c0000
-	dc.l	$0208feb8,$41faffc2,$2d48febc,$61ff0000
-	dc.l	$050a4a00,$66ff0000,$053061ff,$00000532
-	dc.l	$4a0066ff,$00000522,$42804e75,$09456e61
-	dc.l	$626c6564,$20534e41,$4e2e2e2e,$000051fc
-	dc.l	$52aefea0,$4cfb3fff,$01700000,$0544f23b
-	dc.l	$d0ff0170,$0000057a,$f23b9c00,$01700000
-	dc.l	$05d03d7c,$0000fea6,$48ee7fff,$ff80f22e
-	dc.l	$f0ffff20,$f23c9000,$00004000,$f22ebc00
-	dc.l	$feb42d7c,$ffff0000,$fe802d7c,$00000000
-	dc.l	$fe842d7c,$00000001,$fe88f22e,$d080fe80
-	dc.l	$44fc0000,$f23c5822,$000242ee,$fea448ee
-	dc.l	$7fffffc0,$f22ef0ff,$fec0f22e,$bc00fea8
-	dc.l	$2d7cffff,$0000ff20,$2d7c0000,$0000ff24
-	dc.l	$2d7c0000,$0001ff28,$2d7c0900,$4080feb8
-	dc.l	$41faffc2,$2d48febc,$61ff0000,$042e4a00
-	dc.l	$66ff0000,$045461ff,$00000456,$4a0066ff
-	dc.l	$00000446,$42804e75,$09456e61,$626c6564
-	dc.l	$204f5045,$52522e2e,$2e0051fc,$52aefea0
-	dc.l	$4cfb3fff,$01700000,$0468f23b,$d0ff0170
-	dc.l	$0000049e,$f23b9c00,$01700000,$04f43d7c
-	dc.l	$0000fea6,$48ee7fff,$ff80f22e,$f0ffff20
-	dc.l	$f23c9000,$00002000,$f22ebc00,$feb42d7c
-	dc.l	$ffff0000,$fe802d7c,$00000000,$fe842d7c
-	dc.l	$00000000,$fe88f22e,$d080fe80,$44fc0000
-	dc.l	$f23c4422,$7f800000,$42eefea4,$48ee7fff
-	dc.l	$ffc0f22e,$f0fffec0,$f22ebc00,$fea82d7c
-	dc.l	$ffff0000,$ff202d7c,$00000000,$ff242d7c
-	dc.l	$00000000,$ff282d7c,$01002080,$feb841fa
-	dc.l	$ffc02d48,$febc61ff,$00000350,$4a0066ff
-	dc.l	$00000376,$61ff0000,$03784a00,$66ff0000
-	dc.l	$03684280,$4e750945,$6e61626c,$65642044
-	dc.l	$5a2e2e2e,$000051fc,$52aefea0,$4cfb3fff
-	dc.l	$01700000,$038cf23b,$d0ff0170,$000003c2
-	dc.l	$f23b9c00,$01700000,$04183d7c,$0000fea6
-	dc.l	$48ee7fff,$ff80f22e,$f0ffff20,$f23c9000
-	dc.l	$00000400,$f22ebc00,$feb42d7c,$40000000
-	dc.l	$fe802d7c,$80000000,$fe842d7c,$00000000
-	dc.l	$fe88f22e,$d080fe80,$44fc0000,$f23c5820
-	dc.l	$000042ee,$fea448ee,$7fffffc0,$f22ef0ff
-	dc.l	$fec0f22e,$bc00fea8,$2d7c4000,$0000ff20
-	dc.l	$2d7c8000,$0000ff24,$2d7c0000,$0000ff28
-	dc.l	$2d7c0200,$0410feb8,$41faffc2,$2d48febc
-	dc.l	$61ff0000,$02764a00,$66ff0000,$029c61ff
-	dc.l	$0000029e,$4a0066ff,$0000028e,$42804e75
-	dc.l	$09556e69,$6d706c65,$6d656e74,$65642064
-	dc.l	$61746120,$74797065,$2f666f72,$6d61742e
-	dc.l	$2e2e0000,$52aefea0,$4cfb3fff,$01700000
-	dc.l	$02a0f23b,$d0ff0170,$000002d6,$f23b9c00
-	dc.l	$01700000,$032c3d7c,$0000fea6,$48ee7fff
-	dc.l	$ff80f22e,$f0ffff20,$f22ebc00,$feb42d7c
-	dc.l	$c03f0000,$fe802d7c,$00000000,$fe842d7c
-	dc.l	$00000001,$fe88f23c,$58000002,$44fc0000
-	dc.l	$f22e4823,$fe8042ee,$fea448ee,$7fffffc0
-	dc.l	$f22ef0ff,$fec0f22e,$bc00fea8,$2d7cc001
-	dc.l	$0000ff20,$2d7c8000,$0000ff24,$2d7c0000
-	dc.l	$0000ff28,$2d7c0800,$0000feb8,$41faffc2
-	dc.l	$2d48febc,$61ff0000,$01924a00,$66ff0000
-	dc.l	$01b861ff,$000001ba,$4a0066ff,$000001aa
-	dc.l	$52aefea0,$4cfb3fff,$01700000,$01e4f23b
-	dc.l	$d0ff0170,$0000021a,$f23b9c00,$01700000
-	dc.l	$02703d7c,$0000fea6,$48ee7fff,$ff80f22e
-	dc.l	$f0ffff20,$f22ebc00,$feb42d7c,$80000000
-	dc.l	$fe802d7c,$01000000,$fe842d7c,$00000000
-	dc.l	$fe88f23c,$40007fff,$ffff44fc,$0000f22e
-	dc.l	$4823fe80,$42eefea4,$48ee7fff,$ffc0f22e
-	dc.l	$f0fffec0,$f22ebc00,$fea82d7c,$80170000
-	dc.l	$ff202d7c,$fffffffe,$ff242d7c,$00000000
-	dc.l	$ff282d7c,$08000000,$feb841fa,$ffc22d48
-	dc.l	$febc61ff,$000000d4,$4a0066ff,$000000fa
-	dc.l	$61ff0000,$00fc4a00,$66ff0000,$00ec52ae
-	dc.l	$fea04cfb,$3fff0170,$00000126,$f23bd0ff
-	dc.l	$01700000,$015cf23b,$9c000170,$000001b2
-	dc.l	$3d7c0000,$fea648ee,$7fffff80,$f22ef0ff
-	dc.l	$ff20f22e,$bc00feb4,$2d7cc123,$0001fe80
-	dc.l	$2d7c2345,$6789fe84,$2d7c1234,$5678fe88
-	dc.l	$44fc0000,$f22e4c18,$fe8042ee,$fea448ee
-	dc.l	$7fffffc0,$f22ef0ff,$fec0f22e,$bc00fea8
-	dc.l	$2d7c3e66,$0000ff20,$2d7cd0ed,$23e8ff24
-	dc.l	$2d7cd140,$35bcff28,$2d7c0000,$0108feb8
-	dc.l	$41faffc2,$2d48febc,$61ff0000,$001e4a00
-	dc.l	$66ff0000,$004461ff,$00000046,$4a0066ff
-	dc.l	$00000036,$42804e75,$41eeff80,$43eeffc0
-	dc.l	$700eb189,$66ff0000,$001c51c8,$fff6302e
-	dc.l	$fea6322e,$fea4b041,$66ff0000,$00084280
-	dc.l	$4e757001,$4e75222e,$fea07001,$4e7541ee
-	dc.l	$ff2043ee,$fec07017,$b18966ff,$0000002c
-	dc.l	$51c8fff6,$41eefeb4,$43eefea8,$b18966ff
-	dc.l	$00000018,$b18966ff,$00000010,$b18966ff
-	dc.l	$00000008,$42804e75,$70014e75,$acacacac
-	dc.l	$acacacac,$acacacac,$acacacac,$acacacac
-	dc.l	$acacacac,$acacacac,$acacacac,$acacacac
-	dc.l	$acacacac,$acacacac,$acacacac,$acacacac
-	dc.l	$acacacac,$acacacac,$acacacac,$7fff0000
-	dc.l	$ffffffff,$ffffffff,$7fff0000,$ffffffff
-	dc.l	$ffffffff,$7fff0000,$ffffffff,$ffffffff
-	dc.l	$7fff0000,$ffffffff,$ffffffff,$7fff0000
-	dc.l	$ffffffff,$ffffffff,$7fff0000,$ffffffff
-	dc.l	$ffffffff,$7fff0000,$ffffffff,$ffffffff
-	dc.l	$7fff0000,$ffffffff,$ffffffff,$00000000
-	dc.l	$00000000,$00000000,$2f00203a,$e884487b
-	dc.l	$0930ffff,$e880202f,$00044e74,$00042f00
-	dc.l	$203ae872,$487b0930,$ffffe86a,$202f0004
-	dc.l	$4e740004,$00000000,$00000000,$00000000
diff --git a/ANDROID_3.4.5/arch/m68k/ifpsp060/ilsp.doc b/ANDROID_3.4.5/arch/m68k/ifpsp060/ilsp.doc
deleted file mode 100644
index 4e6292f0..00000000
--- a/ANDROID_3.4.5/arch/m68k/ifpsp060/ilsp.doc
+++ /dev/null
@@ -1,150 +0,0 @@
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-MOTOROLA MICROPROCESSOR & MEMORY TECHNOLOGY GROUP
-M68000 Hi-Performance Microprocessor Division
-M68060 Software Package
-Production Release P1.00 -- October 10, 1994
-
-M68060 Software Package Copyright © 1993, 1994 Motorola Inc.  All rights reserved.
-
-THE SOFTWARE is provided on an "AS IS" basis and without warranty.
-To the maximum extent permitted by applicable law,
-MOTOROLA DISCLAIMS ALL WARRANTIES WHETHER EXPRESS OR IMPLIED,
-INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
-and any warranty against infringement with regard to the SOFTWARE
-(INCLUDING ANY MODIFIED VERSIONS THEREOF) and any accompanying written materials.
-
-To the maximum extent permitted by applicable law,
-IN NO EVENT SHALL MOTOROLA BE LIABLE FOR ANY DAMAGES WHATSOEVER
-(INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS,
-BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, OR OTHER PECUNIARY LOSS)
-ARISING OF THE USE OR INABILITY TO USE THE SOFTWARE.
-Motorola assumes no responsibility for the maintenance and support of the SOFTWARE.
-
-You are hereby granted a copyright license to use, modify, and distribute the SOFTWARE
-so long as this entire notice is retained without alteration in any modified and/or
-redistributed versions, and that such modified versions are clearly identified as such.
-No licenses are granted by implication, estoppel or otherwise under any patents
-or trademarks of Motorola, Inc.
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-68060 INTEGER SOFTWARE PACKAGE (Library version)
--------------------------------------------------
-
-The file ilsp.s contains the "Library version" of the
-68060 Integer Software Package. Routines included in this
-module can be used to emulate 64-bit divide and multiply,
-and the "cmp2" instruction. These instructions are not
-implemented in hardware on the 68060 and normally take
-exception vector #61 "Unimplemented Integer Instruction".
-
-By re-compiling a program that uses these instructions, and
-making subroutine calls in place of the unimplemented
-instructions, a program can avoid the overhead associated with
-taking the exception.
-
-Release file format:
---------------------
-The file ilsp.sa is essentially a hexadecimal image of the
-release package. This is the ONLY format which will be supported.
-The hex image was created by assembling the source code and
-then converting the resulting binary output image into an
-ASCII text file. The hexadecimal numbers are listed
-using the Motorola Assembly Syntax assembler directive "dc.l"
-(define constant longword). The file can be converted to other
-assembly syntaxes by using any word processor with a global
-search and replace function.
-
-To assist in assembling and linking this module with other modules,
-the installer should add a symbolic label to the top of the file.
-This will allow calling routines to access the entry points
-of this package.
-
-The source code ilsp.s has also been included but only for
-documentation purposes.
-
-Release file structure:
------------------------
-The file ilsp.sa contains an "Entry-Point" section and a
-code section. The ILSP has no "Call-Out" section. The first section
-is the "Entry-Point" section. In order to access a function in the
-package, a program must "bsr" or "jsr" to the location listed
-below in "68060ILSP Entry Points" that corresponds to the desired
-function. A branch instruction located at the selected entry point
-within the package will then enter the correct emulation code routine.
-
-The entry point addresses at the beginning of the package will remain
-fixed so that a program calling the routines will not have to be
-re-compiled with every new 68060ILSP release.
-
-For example, to use a 64-bit multiply instruction,
-do a "bsr" or "jsr" to the entry point defined by
-the 060ILSP entry table. A compiler generated code sequence
-for unsigned multiply could look like:
-
-# mulu.l <ea>,Dh:Dl
-# mulu.l _multiplier,%d1:%d0
-
-	subq.l	&0x8,%sp	# make room for result on stack
-	pea	(%sp)		# pass: result addr on stack
-	mov.l	%d0,-(%sp)	# pass: multiplicand on stack
-	mov.l	_multiplier,-(%sp) # pass: multiplier on stack
-	bsr.l	_060LISP_TOP+0x18 # branch to multiply routine
-	add.l	&0xc,%sp	# clear arguments from stack
-	mov.l	(%sp)+,%d1	# load result[63:32]
-	mov.l	(%sp)+,%d0	# load result[31:0]
-
-For a divide:
-
-# divu.l <ea>,Dr:Dq
-# divu.l _divisor,%d1:%d0
-
-	subq.l	&0x8,%sp	# make room for result on stack
-	pea	(%sp)		# pass: result addr on stack
-	mov.l	%d0,-(%sp)	# pass: dividend hi on stack
-	mov.l	%d1,-(%sp)	# pass: dividend hi on stack
-	mov.l	_divisor,-(%sp) # pass: divisor on stack
-	bsr.l	_060LISP_TOP+0x08 # branch to divide routine
-	add.l	&0xc,%sp	# clear arguments from stack
-	mov.l	(%sp)+,%d1	# load remainder
-	mov.l	(%sp)+,%d0	# load quotient
-
-The library routines also return the correct condition code
-register value. If this is important, then the caller of the library
-routine must make sure that the value isn't lost while popping
-other items off of the stack.
-
-An example of using the "cmp2" instruction is as follows:
-
-# cmp2.l <ea>,Rn
-# cmp2.l _bounds,%d0
-
-	pea	_bounds		# pass ptr to bounds
-	mov.l	%d0,-(%sp)	# pass Rn
-	bsr.l	_060LSP_TOP_+0x48 # branch to "cmp2" routine
-	mov.w	%cc,_tmp	# save off condition codes
-	addq.l	&0x8,%sp	# clear arguments from stack
-
-Exception reporting:
---------------------
-If the instruction being emulated is a divide and the source
-operand is a zero, then the library routine, as its last
-instruction, executes an implemented divide using a zero
-source operand so that an "Integer Divide-by-Zero" exception
-will be taken. Although the exception stack frame will not
-point to the correct instruction, the user will at least be able
-to record that such an event occurred if desired.
-
-68060ILSP entry points:
------------------------
-_060ILSP_TOP:
-0x000:	_060LSP__idivs64_
-0x008:	_060LSP__idivu64_
-
-0x010:	_060LSP__imuls64_
-0x018:	_060LSP__imulu64_
-
-0x020:	_060LSP__cmp2_Ab_
-0x028:	_060LSP__cmp2_Aw_
-0x030:	_060LSP__cmp2_Al_
-0x038:	_060LSP__cmp2_Db_
-0x040:	_060LSP__cmp2_Dw_
-0x048:	_060LSP__cmp2_Dl_
diff --git a/ANDROID_3.4.5/arch/m68k/ifpsp060/ilsp.sa b/ANDROID_3.4.5/arch/m68k/ifpsp060/ilsp.sa
deleted file mode 100644
index 2757d502..00000000
--- a/ANDROID_3.4.5/arch/m68k/ifpsp060/ilsp.sa
+++ /dev/null
@@ -1,101 +0,0 @@
-	dc.l	$60ff0000,$01fe0000,$60ff0000,$02080000
-	dc.l	$60ff0000,$04900000,$60ff0000,$04080000
-	dc.l	$60ff0000,$051e0000,$60ff0000,$053c0000
-	dc.l	$60ff0000,$055a0000,$60ff0000,$05740000
-	dc.l	$60ff0000,$05940000,$60ff0000,$05b40000
-	dc.l	$51fc51fc,$51fc51fc,$51fc51fc,$51fc51fc
-	dc.l	$51fc51fc,$51fc51fc,$51fc51fc,$51fc51fc
-	dc.l	$51fc51fc,$51fc51fc,$51fc51fc,$51fc51fc
-	dc.l	$51fc51fc,$51fc51fc,$51fc51fc,$51fc51fc
-	dc.l	$51fc51fc,$51fc51fc,$51fc51fc,$51fc51fc
-	dc.l	$51fc51fc,$51fc51fc,$51fc51fc,$51fc51fc
-	dc.l	$51fc51fc,$51fc51fc,$51fc51fc,$51fc51fc
-	dc.l	$51fc51fc,$51fc51fc,$51fc51fc,$51fc51fc
-	dc.l	$51fc51fc,$51fc51fc,$51fc51fc,$51fc51fc
-	dc.l	$51fc51fc,$51fc51fc,$51fc51fc,$51fc51fc
-	dc.l	$51fc51fc,$51fc51fc,$51fc51fc,$51fc51fc
-	dc.l	$51fc51fc,$51fc51fc,$51fc51fc,$51fc51fc
-	dc.l	$51fc51fc,$51fc51fc,$51fc51fc,$51fc51fc
-	dc.l	$51fc51fc,$51fc51fc,$51fc51fc,$51fc51fc
-	dc.l	$51fc51fc,$51fc51fc,$51fc51fc,$51fc51fc
-	dc.l	$51fc51fc,$51fc51fc,$51fc51fc,$51fc51fc
-	dc.l	$51fc51fc,$51fc51fc,$51fc51fc,$51fc51fc
-	dc.l	$51fc51fc,$51fc51fc,$51fc51fc,$51fc51fc
-	dc.l	$51fc51fc,$51fc51fc,$51fc51fc,$51fc51fc
-	dc.l	$51fc51fc,$51fc51fc,$51fc51fc,$51fc51fc
-	dc.l	$51fc51fc,$51fc51fc,$51fc51fc,$51fc51fc
-	dc.l	$51fc51fc,$51fc51fc,$51fc51fc,$51fc51fc
-	dc.l	$51fc51fc,$51fc51fc,$51fc51fc,$51fc51fc
-	dc.l	$51fc51fc,$51fc51fc,$51fc51fc,$51fc51fc
-	dc.l	$51fc51fc,$51fc51fc,$51fc51fc,$51fc51fc
-	dc.l	$51fc51fc,$51fc51fc,$51fc51fc,$51fc51fc
-	dc.l	$51fc51fc,$51fc51fc,$51fc51fc,$51fc51fc
-	dc.l	$4e56fff0,$48e73f00,$42eefff0,$50eeffff
-	dc.l	$60104e56,$fff048e7,$3f0042ee,$fff051ee
-	dc.l	$ffff2e2e,$00086700,$00ae2a2e,$000c2c2e
-	dc.l	$00104a2e,$ffff671a,$4a875dee,$fffe6a02
-	dc.l	$44874a85,$5deefffd,$6a0844fc,$00004086
-	dc.l	$40854a85,$66164a86,$67000046,$be866306
-	dc.l	$cb466000,$00124c47,$6005600a,$be85634c
-	dc.l	$61ff0000,$00864a2e,$ffff6724,$4a2efffd
-	dc.l	$67024485,$102efffe,$b12efffd,$670c0c86
-	dc.l	$80000000,$62264486,$60060806,$001f661c
-	dc.l	$026e0010,$fff044ee,$fff04a86,$48f60060
-	dc.l	$01610014,$4cdf00fc,$4e5e4e75,$2a2e000c
-	dc.l	$2c2e0010,$026e001c,$fff0006e,$0002fff0
-	dc.l	$44eefff0,$60d62dae,$000c0161,$00142dae
-	dc.l	$00100162,$00140004,$44eefff0,$4cdf00fc
-	dc.l	$4e5e80fc,$00004e75,$0c870000,$ffff621e
-	dc.l	$42814845,$48463a06,$8ac73205,$48463a06
-	dc.l	$8ac74841,$32054245,$48452c01,$4e7542ae
-	dc.l	$fff8422e,$fffc4281,$0807001f,$660e52ae
-	dc.l	$fff8e38f,$e38ee395,$6000ffee,$26072405
-	dc.l	$48424843,$b4436606,$323cffff,$600a2205
-	dc.l	$82c30281,$0000ffff,$2f064246,$48462607
-	dc.l	$2401c4c7,$4843c6c1,$28059883,$48443004
-	dc.l	$38064a40,$6600000a,$b4846304,$538160de
-	dc.l	$2f052c01,$48462a07,$61ff0000,$006a2405
-	dc.l	$26062a1f,$2c1f9c83,$9b8264ff,$0000001a
-	dc.l	$53814282,$26074843,$4243dc83,$db822607
-	dc.l	$42434843,$da834a2e,$fffc6616,$3d41fff4
-	dc.l	$42814845,$48463a06,$424650ee,$fffc6000
-	dc.l	$ff6c3d41,$fff63c05,$48464845,$2e2efff8
-	dc.l	$670a5387,$e28de296,$51cffffa,$2a062c2e
-	dc.l	$fff44e75,$24062606,$28054843,$4844ccc5
-	dc.l	$cac3c4c4,$c6c44284,$4846dc45,$d744dc42
-	dc.l	$d7444846,$42454242,$48454842,$da82da83
-	dc.l	$4e754e56,$fffc48e7,$380042ee,$fffc202e
-	dc.l	$00086700,$005a222e,$000c6700,$00522400
-	dc.l	$26002801,$48434844,$c0c1c2c3,$c4c4c6c4
-	dc.l	$42844840,$d041d784,$d042d784,$48404241
-	dc.l	$42424841,$4842d282,$d283382e,$fffc0204
-	dc.l	$00104a81,$6a040004,$000844c4,$c34048f6
-	dc.l	$00030161,$00104cdf,$001c4e5e,$4e754280
-	dc.l	$4281382e,$fffc0204,$00100004,$000444c4
-	dc.l	$60da4e56,$fffc48e7,$3c0042ee,$fffc202e
-	dc.l	$000867da,$222e000c,$67d44205,$4a806c06
-	dc.l	$44800005,$00014a81,$6c064481,$0a050001
-	dc.l	$24002600,$28014843,$4844c0c1,$c2c3c4c4
-	dc.l	$c6c44284,$4840d041,$d784d042,$d7844840
-	dc.l	$42414242,$48414842,$d282d283,$4a056708
-	dc.l	$46804681,$5280d384,$382efffc,$02040010
-	dc.l	$4a816a04,$00040008,$44c4c340,$48f60003
-	dc.l	$01610010,$4cdf003c,$4e5e4e75,$42804281
-	dc.l	$382efffc,$02040010,$00040004,$44c460da
-	dc.l	$4e56fffc,$48e73800,$42eefffc,$242e0008
-	dc.l	$10360161,$000c1236,$0162000c,$000149c0
-	dc.l	$49c16000,$00b84e56,$fffc48e7,$380042ee
-	dc.l	$fffc242e,$00083036,$0161000c,$32360162
-	dc.l	$000c0002,$48c048c1,$60000092,$4e56fffc
-	dc.l	$48e73800,$42eefffc,$242e0008,$20360161
-	dc.l	$000c2236,$0162000c,$00046000,$00704e56
-	dc.l	$fffc48e7,$380042ee,$fffc242e,$00081036
-	dc.l	$0161000c,$12360162,$000c0001,$49c049c1
-	dc.l	$49c26000,$00484e56,$fffc48e7,$380042ee
-	dc.l	$fffc242e,$00083036,$0161000c,$32360162
-	dc.l	$000c0002,$48c048c1,$48c26000,$00204e56
-	dc.l	$fffc48e7,$380042ee,$fffc242e,$00082036
-	dc.l	$0161000c,$22360162,$000c0004,$948042c3
-	dc.l	$02030004,$9280b282,$42c48604,$02030005
-	dc.l	$382efffc,$0204001a,$880344c4,$4cdf001c
-	dc.l	$4e5e4e75,$00000000,$00000000,$00000000
diff --git a/ANDROID_3.4.5/arch/m68k/ifpsp060/iskeleton.S b/ANDROID_3.4.5/arch/m68k/ifpsp060/iskeleton.S
deleted file mode 100644
index 91a9c65f..00000000
--- a/ANDROID_3.4.5/arch/m68k/ifpsp060/iskeleton.S
+++ /dev/null
@@ -1,347 +0,0 @@
-|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-|MOTOROLA MICROPROCESSOR & MEMORY TECHNOLOGY GROUP
-|M68000 Hi-Performance Microprocessor Division
-|M68060 Software Package
-|Production Release P1.00 -- October 10, 1994
-|
-|M68060 Software Package Copyright © 1993, 1994 Motorola Inc.  All rights reserved.
-|
-|THE SOFTWARE is provided on an "AS IS" basis and without warranty.
-|To the maximum extent permitted by applicable law,
-|MOTOROLA DISCLAIMS ALL WARRANTIES WHETHER EXPRESS OR IMPLIED,
-|INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
-|and any warranty against infringement with regard to the SOFTWARE
-|(INCLUDING ANY MODIFIED VERSIONS THEREOF) and any accompanying written materials.
-|
-|To the maximum extent permitted by applicable law,
-|IN NO EVENT SHALL MOTOROLA BE LIABLE FOR ANY DAMAGES WHATSOEVER
-|(INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS,
-|BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, OR OTHER PECUNIARY LOSS)
-|ARISING OF THE USE OR INABILITY TO USE THE SOFTWARE.
-|Motorola assumes no responsibility for the maintenance and support of the SOFTWARE.
-|
-|You are hereby granted a copyright license to use, modify, and distribute the SOFTWARE
-|so long as this entire notice is retained without alteration in any modified and/or
-|redistributed versions, and that such modified versions are clearly identified as such.
-|No licenses are granted by implication, estoppel or otherwise under any patents
-|or trademarks of Motorola, Inc.
-|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-| iskeleton.s
-|
-| This file contains:
-|	(1) example "Call-out"s
-|	(2) example package entry code
-|	(3) example "Call-out" table
-|
-
-#include <linux/linkage.h>
-#include <asm/entry.h>
-#include <asm/asm-offsets.h>
-
-
-|################################
-| (1) EXAMPLE CALL-OUTS		#
-|				#
-| _060_isp_done()		#
-| _060_real_chk()		#
-| _060_real_divbyzero()		#
-|				#
-| _060_real_cas()		#
-| _060_real_cas2()		#
-| _060_real_lock_page()		#
-| _060_real_unlock_page()	#
-|################################
-
-|
-| _060_isp_done():
-|
-| This is and example main exit point for the Unimplemented Integer
-| Instruction exception handler. For a normal exit, the
-| _isp_unimp() branches to here so that the operating system
-| can do any clean-up desired. The stack frame is the
-| Unimplemented Integer Instruction stack frame with
-| the PC pointing to the instruction following the instruction
-| just emulated.
-| To simply continue execution at the next instruction, just
-| do an "rte".
-|
-| Linux/68k: If returning to user space, check for needed reselections.
-
-	.global		_060_isp_done
-_060_isp_done:
-	btst	#0x5,%sp@		| supervisor bit set in saved SR?
-	beq	.Lnotkern
-	rte
-.Lnotkern:
-	SAVE_ALL_INT
-	GET_CURRENT(%d0)
-	| deliver signals, reschedule etc..
-	jra	ret_from_exception
-
-|
-| _060_real_chk():
-|
-| This is an alternate exit point for the Unimplemented Integer
-| Instruction exception handler. If the instruction was a "chk2"
-| and the operand was out of bounds, then _isp_unimp() creates
-| a CHK exception stack frame from the Unimplemented Integer Instrcution
-| stack frame and branches to this routine.
-|
-| Linux/68k: commented out test for tracing
-
-	.global		_060_real_chk
-_060_real_chk:
-|	tst.b		(%sp)			| is tracing enabled?
-|	bpls		real_chk_end		| no
-
-|
-|	    CHK FRAME		   TRACE FRAME
-|	*****************	*****************
-|	*   Current PC	*	*   Current PC	*
-|	*****************	*****************
-|	* 0x2 *  0x018	*	* 0x2 *  0x024	*
-|	*****************	*****************
-|	*     Next	*	*     Next	*
-|	*      PC	*	*      PC	*
-|	*****************	*****************
-|	*      SR	*	*      SR	*
-|	*****************	*****************
-|
-|	move.b		#0x24,0x7(%sp)		| set trace vecno
-|	bral		_060_real_trace
-
-real_chk_end:
-	bral		trap			| jump to trap handler
-
-|
-| _060_real_divbyzero:
-|
-| This is an alternate exit point for the Unimplemented Integer
-| Instruction exception handler isp_unimp(). If the instruction is a 64-bit
-| integer divide where the source operand is a zero, then the _isp_unimp()
-| creates a Divide-by-zero exception stack frame from the Unimplemented
-| Integer Instruction stack frame and branches to this routine.
-|
-| Remember that a trace exception may be pending. The code below performs
-| no action associated with the "chk" exception. If tracing is enabled,
-| then it create a Trace exception stack frame from the "chk" exception
-| stack frame and branches to the _real_trace() entry point.
-|
-| Linux/68k: commented out test for tracing
-
-	.global		_060_real_divbyzero
-_060_real_divbyzero:
-|	tst.b		(%sp)			| is tracing enabled?
-|	bpls		real_divbyzero_end	| no
-
-|
-|	 DIVBYZERO FRAME	   TRACE FRAME
-|	*****************	*****************
-|	*   Current PC	*	*   Current PC	*
-|	*****************	*****************
-|	* 0x2 *  0x014	*	* 0x2 *  0x024	*
-|	*****************	*****************
-|	*     Next	*	*     Next	*
-|	*      PC	*	*      PC	*
-|	*****************	*****************
-|	*      SR	*	*      SR	*
-|	*****************	*****************
-|
-|	move.b		#0x24,0x7(%sp)		| set trace vecno
-|	bral		_060_real_trace
-
-real_divbyzero_end:
-	bral		trap			| jump to trap handler
-
-|##########################
-
-|
-| _060_real_cas():
-|
-| Entry point for the selected cas emulation code implementation.
-| If the implementation provided by the 68060ISP is sufficient,
-| then this routine simply re-enters the package through _isp_cas.
-|
-	.global		_060_real_cas
-_060_real_cas:
-	bral		_I_CALL_TOP+0x80+0x08
-
-|
-| _060_real_cas2():
-|
-| Entry point for the selected cas2 emulation code implementation.
-| If the implementation provided by the 68060ISP is sufficient,
-| then this routine simply re-enters the package through _isp_cas2.
-|
-	.global		_060_real_cas2
-_060_real_cas2:
-	bral		_I_CALL_TOP+0x80+0x10
-
-|
-| _060_lock_page():
-|
-| Entry point for the operating system`s routine to "lock" a page
-| from being paged out. This routine is needed by the cas/cas2
-| algorithms so that no page faults occur within the "core" code
-| region. Note: the routine must lock two pages if the operand
-| spans two pages.
-| NOTE: THE ROUTINE SHOULD RETURN AN FSLW VALUE IN D0 ON FAILURE
-| SO THAT THE 060SP CAN CREATE A PROPER ACCESS ERROR FRAME.
-| Arguments:
-|	a0 = operand address
-|	d0 = `xxxxxxff -> supervisor; `xxxxxx00 -> user
-|	d1 = `xxxxxxff -> longword; `xxxxxx00 -> word
-| Expected outputs:
-|	d0 = 0 -> success; non-zero -> failure
-|
-| Linux/m68k: Make sure the page is properly paged in, so we use
-| plpaw and handle any exception here. The kernel must not be
-| preempted until _060_unlock_page(), so that the page stays mapped.
-|
-	.global		_060_real_lock_page
-_060_real_lock_page:
-	move.l	%d2,-(%sp)
-	| load sfc/dfc
-	tst.b	%d0
-	jne	1f
-	moveq	#1,%d0
-	jra	2f
-1:	moveq	#5,%d0
-2:	movec.l	%dfc,%d2
-	movec.l	%d0,%dfc
-	movec.l	%d0,%sfc
-
-	clr.l	%d0
-	| prefetch address
-	.chip	68060
-	move.l	%a0,%a1
-1:	plpaw	(%a1)
-	addq.w	#1,%a0
-	tst.b	%d1
-	jeq	2f
-	addq.w	#2,%a0
-2:	plpaw	(%a0)
-3:	.chip	68k
-
-	| restore sfc/dfc
-	movec.l	%d2,%dfc
-	movec.l	%d2,%sfc
-	move.l	(%sp)+,%d2
-	rts
-
-.section __ex_table,"a"
-	.align	4
-	.long	1b,11f
-	.long	2b,21f
-.previous
-.section .fixup,"ax"
-	.even
-11:	move.l	#0x020003c0,%d0
-	or.l	%d2,%d0
-	swap	%d0
-	jra	3b
-21:	move.l	#0x02000bc0,%d0
-	or.l	%d2,%d0
-	swap	%d0
-	jra	3b
-.previous
-
-|
-| _060_unlock_page():
-|
-| Entry point for the operating system`s routine to "unlock" a
-| page that has been "locked" previously with _real_lock_page.
-| Note: the routine must unlock two pages if the operand spans
-| two pages.
-| Arguments:
-|	a0 = operand address
-|	d0 = `xxxxxxff -> supervisor; `xxxxxx00 -> user
-|	d1 = `xxxxxxff -> longword; `xxxxxx00 -> word
-|
-| Linux/m68k: perhaps reenable preemption here...
-
-	.global		_060_real_unlock_page
-_060_real_unlock_page:
-	clr.l		%d0
-	rts
-
-|###########################################################################
-
-|#################################
-| (2) EXAMPLE PACKAGE ENTRY CODE #
-|#################################
-
-	.global		_060_isp_unimp
-_060_isp_unimp:
-	bral		_I_CALL_TOP+0x80+0x00
-
-	.global		_060_isp_cas
-_060_isp_cas:
-	bral		_I_CALL_TOP+0x80+0x08
-
-	.global		_060_isp_cas2
-_060_isp_cas2:
-	bral		_I_CALL_TOP+0x80+0x10
-
-	.global		_060_isp_cas_finish
-_060_isp_cas_finish:
-	bra.l		_I_CALL_TOP+0x80+0x18
-
-	.global		_060_isp_cas2_finish
-_060_isp_cas2_finish:
-	bral		_I_CALL_TOP+0x80+0x20
-
-	.global		_060_isp_cas_inrange
-_060_isp_cas_inrange:
-	bral		_I_CALL_TOP+0x80+0x28
-
-	.global		_060_isp_cas_terminate
-_060_isp_cas_terminate:
-	bral		_I_CALL_TOP+0x80+0x30
-
-	.global		_060_isp_cas_restart
-_060_isp_cas_restart:
-	bral		_I_CALL_TOP+0x80+0x38
-
-|###########################################################################
-
-|###############################
-| (3) EXAMPLE CALL-OUT SECTION #
-|###############################
-
-| The size of this section MUST be 128 bytes!!!
-
-_I_CALL_TOP:
-	.long	_060_real_chk		- _I_CALL_TOP
-	.long	_060_real_divbyzero	- _I_CALL_TOP
-	.long	_060_real_trace		- _I_CALL_TOP
-	.long	_060_real_access	- _I_CALL_TOP
-	.long	_060_isp_done		- _I_CALL_TOP
-
-	.long	_060_real_cas		- _I_CALL_TOP
-	.long	_060_real_cas2		- _I_CALL_TOP
-	.long	_060_real_lock_page	- _I_CALL_TOP
-	.long	_060_real_unlock_page	- _I_CALL_TOP
-
-	.long	0x00000000, 0x00000000, 0x00000000, 0x00000000
-	.long	0x00000000, 0x00000000, 0x00000000
-
-	.long	_060_imem_read		- _I_CALL_TOP
-	.long	_060_dmem_read		- _I_CALL_TOP
-	.long	_060_dmem_write		- _I_CALL_TOP
-	.long	_060_imem_read_word	- _I_CALL_TOP
-	.long	_060_imem_read_long	- _I_CALL_TOP
-	.long	_060_dmem_read_byte	- _I_CALL_TOP
-	.long	_060_dmem_read_word	- _I_CALL_TOP
-	.long	_060_dmem_read_long	- _I_CALL_TOP
-	.long	_060_dmem_write_byte	- _I_CALL_TOP
-	.long	_060_dmem_write_word	- _I_CALL_TOP
-	.long	_060_dmem_write_long	- _I_CALL_TOP
-
-	.long	0x00000000
-	.long	0x00000000, 0x00000000, 0x00000000, 0x00000000
-
-|###########################################################################
-
-| 060 INTEGER KERNEL PACKAGE MUST GO HERE!!!
-#include "isp.sa"
diff --git a/ANDROID_3.4.5/arch/m68k/ifpsp060/isp.doc b/ANDROID_3.4.5/arch/m68k/ifpsp060/isp.doc
deleted file mode 100644
index 9dadd727..00000000
--- a/ANDROID_3.4.5/arch/m68k/ifpsp060/isp.doc
+++ /dev/null
@@ -1,218 +0,0 @@
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-MOTOROLA MICROPROCESSOR & MEMORY TECHNOLOGY GROUP
-M68000 Hi-Performance Microprocessor Division
-M68060 Software Package
-Production Release P1.00 -- October 10, 1994
-
-M68060 Software Package Copyright © 1993, 1994 Motorola Inc.  All rights reserved.
-
-THE SOFTWARE is provided on an "AS IS" basis and without warranty.
-To the maximum extent permitted by applicable law,
-MOTOROLA DISCLAIMS ALL WARRANTIES WHETHER EXPRESS OR IMPLIED,
-INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
-and any warranty against infringement with regard to the SOFTWARE
-(INCLUDING ANY MODIFIED VERSIONS THEREOF) and any accompanying written materials.
-
-To the maximum extent permitted by applicable law,
-IN NO EVENT SHALL MOTOROLA BE LIABLE FOR ANY DAMAGES WHATSOEVER
-(INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS,
-BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, OR OTHER PECUNIARY LOSS)
-ARISING OF THE USE OR INABILITY TO USE THE SOFTWARE.
-Motorola assumes no responsibility for the maintenance and support of the SOFTWARE.
-
-You are hereby granted a copyright license to use, modify, and distribute the SOFTWARE
-so long as this entire notice is retained without alteration in any modified and/or
-redistributed versions, and that such modified versions are clearly identified as such.
-No licenses are granted by implication, estoppel or otherwise under any patents
-or trademarks of Motorola, Inc.
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-68060 INTEGER SOFTWARE PACKAGE (Kernel version)
-------------------------------------------------
-
-The file isp.sa contains the 68060 Integer Software Package.
-This package is essentially an exception handler that can be
-integrated into an operating system to handle the "Unimplemented
-Integer Instruction" exception vector #61.
-This exception is taken when any of the integer instructions
-not hardware implemented on the 68060 are encountered. The
-isp.sa provides full emulation support for these instructions.
-
-The unimplemented integer instructions are:
-	64-bit divide
-	64-bit multiply
-	movep
-	cmp2
-	chk2
-	cas (w/ a misaligned effective address)
-	cas2
-
-Release file format:
---------------------
-The file isp.sa is essentially a hexadecimal image of the
-release package. This is the ONLY format which will be supported.
-The hex image was created by assembling the source code and
-then converting the resulting binary output image into an
-ASCII text file. The hexadecimal numbers are listed
-using the Motorola Assembly Syntax assembler directive "dc.l"
-(define constant longword). The file can be converted to other
-assembly syntaxes by using any word processor with a global
-search and replace function.
-
-To assist in assembling and linking this module with other modules,
-the installer should add a symbolic label to the top of the file.
-This will allow calling routines to access the entry points
-of this package.
-
-The source code isp.s has also been included but only for
-documentation purposes.
-
-Release file structure:
------------------------
-
-(top of module)
-	-----------------
-	|		| - 128 byte-sized section
-   (1)  |   Call-Out    | - 4 bytes per entry (user fills these in)
-	|		| - example routines in iskeleton.s
-	-----------------
-	|		| - 8 bytes per entry
-   (2)  | Entry Point   | - user does a "bra" or "jmp" to this address
-	|               |
-	-----------------
-	|		| - code section
-   (3)  ~		~
-	|		|
-	-----------------
-(bottom of module)
-
-The first section of this module is the "Call-out" section. This section
-is NOT INCLUDED in isp.sa (an example "Call-out" section is provided at
-the end of the file iskeleton.s). The purpose of this section is to allow
-the ISP routines to reference external functions that must be provided
-by the host operating system. This section MUST be exactly 128 bytes in
-size. There are 32 fields, each 4 bytes in size. Each field corresponds
-to a function required by the ISP (these functions and their location are
-listed in "68060ISP call-outs" below). Each field entry should contain
-the address of the corresponding function RELATIVE to the starting address
-of the "call-out" section. The "Call-out" section must sit adjacent to the
-isp.sa image in memory.
-
-The second section, the "Entry-point" section, is used by external routines
-to access the functions within the ISP. Since the isp.sa hex file contains
-no symbol names, this section contains function entry points that are fixed
-with respect to the top of the package. The currently defined entry-points
-are listed in section "68060 ISP entry points" below. A calling routine
-would simply execute a "bra" or "jmp" that jumped to the selected function
-entry-point.
-
-For example, if the 68060 hardware took a "Unimplemented Integer Instruction"
-exception (vector #61), the operating system should execute something
-similar to:
-
-	bra	_060ISP_TOP+128+0
-
-(_060ISP_TOP is the starting address of the "Call-out" section; the "Call-out"
-section is 128 bytes long; and the Unimplemented Integer ISP handler entry
-point is located 0 bytes from the top of the "Entry-point" section.)
-
-The third section is the code section. After entering through an "Entry-point",
-the entry code jumps to the appropriate emulation code within the code section.
-
-68060ISP call-outs: (details in iskeleton.s)
---------------------
-0x000:	_060_real_chk
-0x004:	_060_real_divbyzero
-0x008:	_060_real_trace
-0x00c:	_060_real_access
-0x010:	_060_isp_done
-
-0x014:	_060_real_cas
-0x018:	_060_real_cas2
-0x01c:	_060_real_lock_page
-0x020:	_060_real_unlock_page
-
-0x024:	(Motorola reserved)
-0x028:	(Motorola reserved)
-0x02c:	(Motorola reserved)
-0x030:	(Motorola reserved)
-0x034:	(Motorola reserved)
-0x038:	(Motorola reserved)
-0x03c:	(Motorola reserved)
-
-0x040:	_060_imem_read
-0x044:	_060_dmem_read
-0x048:	_060_dmem_write
-0x04c:	_060_imem_read_word
-0x050:	_060_imem_read_long
-0x054:	_060_dmem_read_byte
-0x058:	_060_dmem_read_word
-0x05c:	_060_dmem_read_long
-0x060:	_060_dmem_write_byte
-0x064:	_060_dmem_write_word
-0x068:	_060_dmem_write_long
-
-0x06c:	(Motorola reserved)
-0x070:	(Motorola reserved)
-0x074:	(Motorola reserved)
-0x078:	(Motorola reserved)
-0x07c:	(Motorola reserved)
-
-68060ISP entry points:
------------------------
-0x000:	_060_isp_unimp
-
-0x008:	_060_isp_cas
-0x010:	_060_isp_cas2
-0x018:	_060_isp_cas_finish
-0x020:	_060_isp_cas2_finish
-0x028:	_060_isp_cas_inrange
-0x030:	_060_isp_cas_terminate
-0x038:	_060_isp_cas_restart
-
-Integrating cas/cas2:
----------------------
-The instructions "cas2" and "cas" (when used with a misaligned effective
-address) take the Unimplemented Integer Instruction exception. When the
-060ISP is installed properly, these instructions will enter through the
-_060_isp_unimp() entry point of the ISP.
-
-After the 060ISP decodes the instruction type and fetches the appropriate
-data registers, and BEFORE the actual emulated transfers occur, the
-package calls either the "Call-out" _060_real_cas() or _060_real_cas2().
-If the emulation code provided by the 060ISP is sufficient for the
-host system (see isp.s source code), then these "Call-out"s should be
-made, by the system integrator, to point directly back into the package
-through the "Entry-point"s _060_isp_cas() or _060_isp_cas2().
-
-One other necessary action by the integrator is to supply the routines
-_060_real_lock_page() and _060_real_unlock_page(). These functions are
-defined further in iskeleton.s and the 68060 Software Package Specification.
-
-If the "core" emulation routines of either "cas" or "cas2" perform some
-actions which are too system-specific, then the system integrator must
-supply new emulation code. This new emulation code should reside within
-the functions _060_real_cas() or _060_real_cas2(). When this new emulation
-code has completed, then it should re-enter the 060ISP package through the
-"Entry-point" _060_isp_cas_finish() or _060_isp_cas2_finish().
-To see what the register state is upon entering _060_real_cas() or
-_060_real_cas2() and what it should be upon return to the package through
-_060_isp_cas_finish() or _060_isp_cas2_finish(), please refer to the
-source code in isp.s.
-
-Miscellaneous:
---------------
-
-_060_isp_unimp:
-----------------
-- documented in 2.2 in spec.
-- Basic flow:
-	exception taken ---> enter _060_isp_unimp   --|
-						      |
-						      |
-            may exit through _060_real_itrace    <----|
-						  or  |
-            may exit through _060_real_chk       <----|
-						  or  |
-            may exit through _060_real_divbyzero <----|
-						  or  |
-            may exit through _060_isp_done       <----|
diff --git a/ANDROID_3.4.5/arch/m68k/ifpsp060/isp.sa b/ANDROID_3.4.5/arch/m68k/ifpsp060/isp.sa
deleted file mode 100644
index 2f88d2a7..00000000
--- a/ANDROID_3.4.5/arch/m68k/ifpsp060/isp.sa
+++ /dev/null
@@ -1,392 +0,0 @@
-	.long	0x60ff0000,0x02360000,0x60ff0000,0x16260000
-	.long	0x60ff0000,0x12dc0000,0x60ff0000,0x11ea0000
-	.long	0x60ff0000,0x10de0000,0x60ff0000,0x12a40000
-	.long	0x60ff0000,0x12560000,0x60ff0000,0x122a0000
-	.long	0x51fc51fc,0x51fc51fc,0x51fc51fc,0x51fc51fc
-	.long	0x51fc51fc,0x51fc51fc,0x51fc51fc,0x51fc51fc
-	.long	0x51fc51fc,0x51fc51fc,0x51fc51fc,0x51fc51fc
-	.long	0x51fc51fc,0x51fc51fc,0x51fc51fc,0x51fc51fc
-	.long	0x2f00203a,0xfefc487b,0x0930ffff,0xfef8202f
-	.long	0x00044e74,0x00042f00,0x203afeea,0x487b0930
-	.long	0xfffffee2,0x202f0004,0x4e740004,0x2f00203a
-	.long	0xfed8487b,0x0930ffff,0xfecc202f,0x00044e74
-	.long	0x00042f00,0x203afec6,0x487b0930,0xfffffeb6
-	.long	0x202f0004,0x4e740004,0x2f00203a,0xfeb4487b
-	.long	0x0930ffff,0xfea0202f,0x00044e74,0x00042f00
-	.long	0x203afea2,0x487b0930,0xfffffe8a,0x202f0004
-	.long	0x4e740004,0x2f00203a,0xfe90487b,0x0930ffff
-	.long	0xfe74202f,0x00044e74,0x00042f00,0x203afe7e
-	.long	0x487b0930,0xfffffe5e,0x202f0004,0x4e740004
-	.long	0x2f00203a,0xfe6c487b,0x0930ffff,0xfe48202f
-	.long	0x00044e74,0x00042f00,0x203afe76,0x487b0930
-	.long	0xfffffe32,0x202f0004,0x4e740004,0x2f00203a
-	.long	0xfe64487b,0x0930ffff,0xfe1c202f,0x00044e74
-	.long	0x00042f00,0x203afe52,0x487b0930,0xfffffe06
-	.long	0x202f0004,0x4e740004,0x2f00203a,0xfe40487b
-	.long	0x0930ffff,0xfdf0202f,0x00044e74,0x00042f00
-	.long	0x203afe2e,0x487b0930,0xfffffdda,0x202f0004
-	.long	0x4e740004,0x2f00203a,0xfe1c487b,0x0930ffff
-	.long	0xfdc4202f,0x00044e74,0x00042f00,0x203afe0a
-	.long	0x487b0930,0xfffffdae,0x202f0004,0x4e740004
-	.long	0x2f00203a,0xfdf8487b,0x0930ffff,0xfd98202f
-	.long	0x00044e74,0x00042f00,0x203afde6,0x487b0930
-	.long	0xfffffd82,0x202f0004,0x4e740004,0x2f00203a
-	.long	0xfdd4487b,0x0930ffff,0xfd6c202f,0x00044e74
-	.long	0x00042f00,0x203afdc2,0x487b0930,0xfffffd56
-	.long	0x202f0004,0x4e740004,0x4e56ffa0,0x48ee3fff
-	.long	0xffc02d56,0xfff8082e,0x00050004,0x66084e68
-	.long	0x2d48fffc,0x600841ee,0x000c2d48,0xfffc422e
-	.long	0xffaa3d6e,0x0004ffa8,0x2d6e0006,0xffa4206e
-	.long	0xffa458ae,0xffa461ff,0xffffff26,0x2d40ffa0
-	.long	0x0800001e,0x67680800,0x00166628,0x61ff0000
-	.long	0x0cb0082e,0x00050004,0x670000ac,0x082e0002
-	.long	0xffaa6700,0x00a2082e,0x00070004,0x66000186
-	.long	0x600001b0,0x61ff0000,0x0a28082e,0x0002ffaa
-	.long	0x660e082e,0x0005ffaa,0x6600010a,0x60000078
-	.long	0x082e0005,0x000467ea,0x082e0005,0xffaa6600
-	.long	0x01264a2e,0x00046b00,0x014c6000,0x01760800
-	.long	0x0018670a,0x61ff0000,0x07ae6000,0x004a0800
-	.long	0x001b6730,0x48400c00,0x00fc670a,0x61ff0000
-	.long	0x0e926000,0x0032206e,0xffa454ae,0xffa461ff
-	.long	0xfffffe68,0x4a816600,0x019861ff,0x00000d20
-	.long	0x60000014,0x61ff0000,0x08c40c2e,0x0010ffaa
-	.long	0x66000004,0x605c1d6e,0xffa90005,0x082e0005
-	.long	0x00046606,0x206efffc,0x4e604cee,0x3fffffc0
-	.long	0x082e0007,0x00046612,0x2d6effa4,0x00062cae
-	.long	0xfff84e5e,0x60ffffff,0xfd622d6e,0xfff8fffc
-	.long	0x3d6e0004,0x00002d6e,0x00060008,0x2d6effa4
-	.long	0x00023d7c,0x20240006,0x598e4e5e,0x60ffffff
-	.long	0xfd0e1d6e,0xffa90005,0x4cee3fff,0xffc03cae
-	.long	0x00042d6e,0x00060008,0x2d6effa4,0x00023d7c
-	.long	0x20180006,0x2c6efff8,0xdffc0000,0x006060ff
-	.long	0xfffffcb0,0x1d6effa9,0x00054cee,0x3fffffc0
-	.long	0x3cae0004,0x2d6e0006,0x00082d6e,0xffa40002
-	.long	0x3d7c2014,0x00062c6e,0xfff8dffc,0x00000060
-	.long	0x60ffffff,0xfc941d6e,0xffa90005,0x4cee3fff
-	.long	0xffc02d6e,0x0006000c,0x3d7c2014,0x000a2d6e
-	.long	0xffa40006,0x2c6efff8,0xdffc0000,0x006460ff
-	.long	0xfffffc66,0x1d6effa9,0x00054cee,0x3fffffc0
-	.long	0x2d6e0006,0x000c3d7c,0x2024000a,0x2d6effa4
-	.long	0x00062c6e,0xfff8dffc,0x00000064,0x60ffffff
-	.long	0xfc4e1d6e,0xffa90005,0x4cee3fff,0xffc03d7c
-	.long	0x00f4000e,0x2d6effa4,0x000a3d6e,0x00040008
-	.long	0x2c6efff8,0xdffc0000,0x006860ff,0xfffffc4c
-	.long	0x2c882d40,0xfffc4fee,0xffc04cdf,0x7fff2f2f
-	.long	0x000c2f6f,0x00040010,0x2f6f000c,0x00042f6f
-	.long	0x0008000c,0x2f5f0004,0x3f7c4008,0x00066028
-	.long	0x4cee3fff,0xffc04e5e,0x514f2eaf,0x00083f6f
-	.long	0x000c0004,0x3f7c4008,0x00062f6f,0x00020008
-	.long	0x2f7c0942,0x8001000c,0x08170005,0x670608ef
-	.long	0x0002000d,0x60ffffff,0xfbcc0c2e,0x0040ffaa
-	.long	0x660c4280,0x102effab,0x2daeffac,0x0ce04e75
-	.long	0x2040302e,0xffa03200,0x0240003f,0x02810000
-	.long	0x0007303b,0x020a4efb,0x00064afc,0x00400000
-	.long	0x00000000,0x00000000,0x00000000,0x00000000
-	.long	0x00000000,0x00000000,0x00000000,0x00000080
-	.long	0x0086008c,0x00920098,0x009e00a4,0x00aa00b0
-	.long	0x00ce00ec,0x010a0128,0x01460164,0x01820196
-	.long	0x01b401d2,0x01f0020e,0x022c024a,0x0268027c
-	.long	0x029a02b8,0x02d602f4,0x03120330,0x034e036c
-	.long	0x036c036c,0x036c036c,0x036c036c,0x036c03d6
-	.long	0x03f0040a,0x042a03ca,0x00000000,0x0000206e
-	.long	0xffe04e75,0x206effe4,0x4e75206e,0xffe84e75
-	.long	0x206effec,0x4e75206e,0xfff04e75,0x206efff4
-	.long	0x4e75206e,0xfff84e75,0x206efffc,0x4e752008
-	.long	0x206effe0,0xd0882d40,0xffe02d48,0xffac1d7c
-	.long	0x0000ffab,0x1d7c0040,0xffaa4e75,0x2008206e
-	.long	0xffe4d088,0x2d40ffe4,0x2d48ffac,0x1d7c0001
-	.long	0xffab1d7c,0x0040ffaa,0x4e752008,0x206effe8
-	.long	0xd0882d40,0xffe82d48,0xffac1d7c,0x0002ffab
-	.long	0x1d7c0040,0xffaa4e75,0x2008206e,0xffecd088
-	.long	0x2d40ffec,0x2d48ffac,0x1d7c0003,0xffab1d7c
-	.long	0x0040ffaa,0x4e752008,0x206efff0,0xd0882d40
-	.long	0xfff02d48,0xffac1d7c,0x0004ffab,0x1d7c0040
-	.long	0xffaa4e75,0x2008206e,0xfff4d088,0x2d40fff4
-	.long	0x2d48ffac,0x1d7c0005,0xffab1d7c,0x0040ffaa
-	.long	0x4e752008,0x206efff8,0xd0882d40,0xfff82d48
-	.long	0xffac1d7c,0x0006ffab,0x1d7c0040,0xffaa4e75
-	.long	0x1d7c0004,0xffaa2008,0x206efffc,0xd0882d40
-	.long	0xfffc4e75,0x202effe0,0x2d40ffac,0x90882d40
-	.long	0xffe02040,0x1d7c0000,0xffab1d7c,0x0040ffaa
-	.long	0x4e75202e,0xffe42d40,0xffac9088,0x2d40ffe4
-	.long	0x20401d7c,0x0001ffab,0x1d7c0040,0xffaa4e75
-	.long	0x202effe8,0x2d40ffac,0x90882d40,0xffe82040
-	.long	0x1d7c0002,0xffab1d7c,0x0040ffaa,0x4e75202e
-	.long	0xffec2d40,0xffac9088,0x2d40ffec,0x20401d7c
-	.long	0x0003ffab,0x1d7c0040,0xffaa4e75,0x202efff0
-	.long	0x2d40ffac,0x90882d40,0xfff02040,0x1d7c0004
-	.long	0xffab1d7c,0x0040ffaa,0x4e75202e,0xfff42d40
-	.long	0xffac9088,0x2d40fff4,0x20401d7c,0x0005ffab
-	.long	0x1d7c0040,0xffaa4e75,0x202efff8,0x2d40ffac
-	.long	0x90882d40,0xfff82040,0x1d7c0006,0xffab1d7c
-	.long	0x0040ffaa,0x4e751d7c,0x0008ffaa,0x202efffc
-	.long	0x90882d40,0xfffc2040,0x4e75206e,0xffa454ae
-	.long	0xffa461ff,0xfffff9d4,0x4a8166ff,0xfffffd04
-	.long	0x3040d1ee,0xffe04e75,0x206effa4,0x54aeffa4
-	.long	0x61ffffff,0xf9b64a81,0x66ffffff,0xfce63040
-	.long	0xd1eeffe4,0x4e75206e,0xffa454ae,0xffa461ff
-	.long	0xfffff998,0x4a8166ff,0xfffffcc8,0x3040d1ee
-	.long	0xffe84e75,0x206effa4,0x54aeffa4,0x61ffffff
-	.long	0xf97a4a81,0x66ffffff,0xfcaa3040,0xd1eeffec
-	.long	0x4e75206e,0xffa454ae,0xffa461ff,0xfffff95c
-	.long	0x4a8166ff,0xfffffc8c,0x3040d1ee,0xfff04e75
-	.long	0x206effa4,0x54aeffa4,0x61ffffff,0xf93e4a81
-	.long	0x66ffffff,0xfc6e3040,0xd1eefff4,0x4e75206e
-	.long	0xffa454ae,0xffa461ff,0xfffff920,0x4a8166ff
-	.long	0xfffffc50,0x3040d1ee,0xfff84e75,0x206effa4
-	.long	0x54aeffa4,0x61ffffff,0xf9024a81,0x66ffffff
-	.long	0xfc323040,0xd1eefffc,0x4e752f01,0x206effa4
-	.long	0x54aeffa4,0x61ffffff,0xf8e24a81,0x66ffffff
-	.long	0xfc12221f,0x207614e0,0x08000008,0x670e48e7
-	.long	0x3c002a00,0x260860ff,0x000000ec,0x2f022200
-	.long	0xe9590241,0x000f2236,0x14c00800,0x000b6602
-	.long	0x48c12400,0xef5a0282,0x00000003,0xe5a949c0
-	.long	0xd081d1c0,0x241f4e75,0x1d7c0080,0xffaa206e
-	.long	0xffa44e75,0x206effa4,0x54aeffa4,0x61ffffff
-	.long	0xf87a4a81,0x66ffffff,0xfbaa3040,0x4e75206e
-	.long	0xffa458ae,0xffa461ff,0xfffff876,0x4a8166ff
-	.long	0xfffffb90,0x20404e75,0x206effa4,0x54aeffa4
-	.long	0x61ffffff,0xf8464a81,0x66ffffff,0xfb763040
-	.long	0xd1eeffa4,0x55884e75,0x206effa4,0x54aeffa4
-	.long	0x61ffffff,0xf8264a81,0x66ffffff,0xfb56206e
-	.long	0xffa45588,0x08000008,0x670e48e7,0x3c002a00
-	.long	0x260860ff,0x00000030,0x2f022200,0xe9590241
-	.long	0x000f2236,0x14c00800,0x000b6602,0x48c12400
-	.long	0xef5a0282,0x00000003,0xe5a949c0,0xd081d1c0
-	.long	0x241f4e75,0x08050006,0x67044282,0x6016e9c5
-	.long	0x24042436,0x24c00805,0x000b6602,0x48c2e9c5
-	.long	0x0542e1aa,0x08050007,0x67024283,0xe9c50682
-	.long	0x0c000002,0x6d346718,0x206effa4,0x58aeffa4
-	.long	0x61ffffff,0xf7ac4a81,0x66ffffff,0xfac66018
-	.long	0x206effa4,0x54aeffa4,0x61ffffff,0xf77e4a81
-	.long	0x66ffffff,0xfaae48c0,0xd680e9c5,0x07826700
-	.long	0x006a0c00,0x00026d34,0x6718206e,0xffa458ae
-	.long	0xffa461ff,0xfffff76a,0x4a8166ff,0xfffffa84
-	.long	0x601c206e,0xffa454ae,0xffa461ff,0xfffff73c
-	.long	0x4a8166ff,0xfffffa6c,0x48c06002,0x42802800
-	.long	0x08050002,0x67122043,0x61ffffff,0xf7764a81
-	.long	0x6624d082,0xd0846016,0xd6822043,0x61ffffff
-	.long	0xf7624a81,0x6610d084,0x6004d682,0x20032040
-	.long	0x4cdf003c,0x4e752043,0x203c0101,0x000160ff
-	.long	0xfffff9f0,0x322effa0,0x10010240,0x00072076
-	.long	0x04e0d0ee,0xffa20801,0x00076700,0x008c3001
-	.long	0xef580240,0x00072036,0x04c00801,0x00066752
-	.long	0x24002448,0xe19a2002,0x61ffffff,0xf71c4a81
-	.long	0x660000fc,0x544a204a,0xe19a2002,0x61ffffff
-	.long	0xf7084a81,0x660000e8,0x544a204a,0xe19a2002
-	.long	0x61ffffff,0xf6f44a81,0x660000d4,0x544a204a
-	.long	0xe19a2002,0x61ffffff,0xf6e04a81,0x660000c0
-	.long	0x4e752400,0x2448e048,0x61ffffff,0xf6cc4a81
-	.long	0x660000ac,0x544a204a,0x200261ff,0xfffff6ba
-	.long	0x4a816600,0x009a4e75,0x08010006,0x675c2448
-	.long	0x61ffffff,0xf6624a81,0x66000092,0x2400544a
-	.long	0x204a61ff,0xfffff650,0x4a816600,0x0080e14a
-	.long	0x1400544a,0x204a61ff,0xfffff63c,0x4a816600
-	.long	0x006ce18a,0x1400544a,0x204a61ff,0xfffff628
-	.long	0x4a816600,0x0058e18a,0x1400122e,0xffa0e209
-	.long	0x02410007,0x2d8214c0,0x4e752448,0x61ffffff
-	.long	0xf6064a81,0x66000036,0x2400544a,0x204a61ff
-	.long	0xfffff5f4,0x4a816600,0x0024e14a,0x1400122e
-	.long	0xffa0e209,0x02410007,0x3d8214c2,0x4e75204a
-	.long	0x203c00a1,0x000160ff,0xfffff8a8,0x204a203c
-	.long	0x01210001,0x60ffffff,0xf89a61ff,0xfffff914
-	.long	0x102effa2,0xe9180240,0x000f2436,0x04c00c2e
-	.long	0x0002ffa0,0x6d506728,0x244861ff,0xfffff5c4
-	.long	0x4a816600,0x009e2600,0x588a204a,0x61ffffff
-	.long	0xf5b24a81,0x6600008c,0x22002003,0x60000048
-	.long	0x244861ff,0xfffff59c,0x4a816600,0x00763200
-	.long	0x484048c0,0x48c1082e,0x0007ffa2,0x66000028
-	.long	0x48c26000,0x00222448,0x61ffffff,0xf5604a81
-	.long	0x6600005e,0x1200e048,0x49c049c1,0x082e0007
-	.long	0xffa26602,0x49c29480,0x42c30203,0x00049280
-	.long	0xb28242c4,0x86040203,0x0005382e,0xffa80204
-	.long	0x001a8803,0x3d44ffa8,0x082e0003,0xffa26602
-	.long	0x4e750804,0x00006602,0x4e751d7c,0x0010ffaa
-	.long	0x4e75204a,0x203c0101,0x000160ff,0xfffff7c4
-	.long	0x204a203c,0x01410001,0x60ffffff,0xf7b6102e
-	.long	0xffa10200,0x00386600,0x0208102e,0xffa10240
-	.long	0x00072e36,0x04c06700,0x00c0102e,0xffa3122e
-	.long	0xffa20240,0x0007e809,0x02410007,0x3d40ffb2
-	.long	0x3d41ffb4,0x2a3604c0,0x2c3614c0,0x082e0003
-	.long	0xffa2671a,0x4a875dee,0xffb06a02,0x44874a85
-	.long	0x5deeffb1,0x6a0844fc,0x00004086,0x40854a85
-	.long	0x66164a86,0x67000048,0xbe866306,0xcb466000
-	.long	0x00124c47,0x6005600a,0xbe85634e,0x61ff0000
-	.long	0x0068082e,0x0003ffa2,0x67244a2e,0xffb16702
-	.long	0x4485102e,0xffb0b12e,0xffb1670c,0x0c868000
-	.long	0x00006226,0x44866006,0x0806001f,0x661c44ee
-	.long	0xffa84a86,0x42eeffa8,0x302effb2,0x322effb4
-	.long	0x2d8504c0,0x2d8614c0,0x4e7508ee,0x0001ffa9
-	.long	0x08ae0000,0xffa94e75,0x022e001e,0xffa9002e
-	.long	0x0020ffaa,0x4e750c87,0x0000ffff,0x621e4281
-	.long	0x48454846,0x3a068ac7,0x32054846,0x3a068ac7
-	.long	0x48413205,0x42454845,0x2c014e75,0x42aeffbc
-	.long	0x422effb6,0x42810807,0x001f660e,0x52aeffbc
-	.long	0xe38fe38e,0xe3956000,0xffee2607,0x24054842
-	.long	0x4843b443,0x6606323c,0xffff600a,0x220582c3
-	.long	0x02810000,0xffff2f06,0x42464846,0x26072401
-	.long	0xc4c74843,0xc6c12805,0x98834844,0x30043806
-	.long	0x4a406600,0x000ab484,0x63045381,0x60de2f05
-	.long	0x2c014846,0x2a0761ff,0x0000006a,0x24052606
-	.long	0x2a1f2c1f,0x9c839b82,0x64ff0000,0x001a5381
-	.long	0x42822607,0x48434243,0xdc83db82,0x26074243
-	.long	0x4843da83,0x4a2effb6,0x66163d41,0xffb84281
-	.long	0x48454846,0x3a064246,0x50eeffb6,0x6000ff6c
-	.long	0x3d41ffba,0x3c054846,0x48452e2e,0xffbc670a
-	.long	0x5387e28d,0xe29651cf,0xfffa2a06,0x2c2effb8
-	.long	0x4e752406,0x26062805,0x48434844,0xccc5cac3
-	.long	0xc4c4c6c4,0x42844846,0xdc45d744,0xdc42d744
-	.long	0x48464245,0x42424845,0x4842da82,0xda834e75
-	.long	0x700461ff,0xfffff61c,0x0c2e0080,0xffaa6712
-	.long	0x244861ff,0xfffff2dc,0x4a81661e,0x2e006000
-	.long	0xfde658ae,0xffa461ff,0xfffff286,0x4a8166ff
-	.long	0xfffff5a0,0x2e006000,0xfdce61ff,0xfffff5ce
-	.long	0x204a203c,0x01010001,0x60ffffff,0xf556102e
-	.long	0xffa10c00,0x00076e00,0x00b40240,0x00072636
-	.long	0x04c0342e,0xffa24241,0x1202e95a,0x02420007
-	.long	0x283624c0,0x4a846700,0x00884a83,0x67000082
-	.long	0x422effb0,0x082e0003,0xffa26718,0x4a836c08
-	.long	0x4483002e,0x0001ffb0,0x4a846c08,0x44840a2e
-	.long	0x0001ffb0,0x2a032c03,0x2e044846,0x4847c6c4
-	.long	0xc8c6cac7,0xccc74287,0x4843d644,0xdd87d645
-	.long	0xdd874843,0x42444245,0x48444845,0xd885d886
-	.long	0x4a2effb0,0x67084683,0x46845283,0xd9872d83
-	.long	0x24c044fc,0x00002d84,0x14c042c7,0x02070008
-	.long	0x1c2effa9,0x02060010,0x8c071d46,0xffa94e75
-	.long	0x42b624c0,0x42b614c0,0x7e0460e4,0x700461ff
-	.long	0xfffff510,0x0c2e0080,0xffaa6714,0x244861ff
-	.long	0xfffff1d0,0x4a816600,0x00202600,0x6000ff34
-	.long	0x58aeffa4,0x61ffffff,0xf1784a81,0x66ffffff
-	.long	0xf4922600,0x6000ff1c,0x61ffffff,0xf4c0204a
-	.long	0x203c0101,0x000160ff,0xfffff448,0x2d40ffb4
-	.long	0x2200e958,0x0240000f,0x227604c0,0x2d49ffb0
-	.long	0x2001ec49,0x02410007,0x2a3614c0,0x02400007
-	.long	0x263604c0,0x3d40ffba,0x302effa2,0x2200e958
-	.long	0x0240000f,0x207604c0,0x2d48ffbc,0x2001ec49
-	.long	0x02410007,0x283614c0,0x02400007,0x243604c0
-	.long	0x3d40ffb8,0x082e0001,0xffa056c7,0x082e0005
-	.long	0x000456c6,0x24482649,0x22072006,0x61ffffff
-	.long	0xf05c204a,0x4a8066ff,0x000001c8,0x22072006
-	.long	0x204b61ff,0xfffff046,0x204b4a80,0x660a204a
-	.long	0x224b60ff,0xfffff020,0x2f002207,0x2006204a
-	.long	0x61ffffff,0xf03e201f,0x204b60ff,0x00000194
-	.long	0x082e0001,0xffa06648,0x44eeffa8,0xb0426602
-	.long	0xb24342ee,0xffa84a04,0x6610362e,0xffba3d81
-	.long	0x34c2342e,0xffb83d80,0x24c2082e,0x00050004
-	.long	0x56c22002,0x51c1206e,0xffbc61ff,0xffffeff4
-	.long	0x200251c1,0x206effb0,0x61ffffff,0xefe64e75
-	.long	0x44eeffa8,0xb0826602,0xb28342ee,0xffa84a04
-	.long	0x6610362e,0xffba2d81,0x34c0342e,0xffb82d80
-	.long	0x24c0082e,0x00050004,0x56c22002,0x50c1206e
-	.long	0xffbc61ff,0xffffefac,0x200250c1,0x206effb0
-	.long	0x61ffffff,0xef9e4e75,0x202effb4,0x6000feae
-	.long	0x082e0001,0xffa06610,0x700261ff,0xfffff364
-	.long	0x2d48ffb4,0x51c7600e,0x700461ff,0xfffff354
-	.long	0x2d48ffb4,0x50c7302e,0xffa22200,0xec480240
-	.long	0x00072436,0x04c00241,0x00072836,0x14c03d41
-	.long	0xffb8082e,0x00050004,0x56c62448,0x22072006
-	.long	0x61ffffff,0xef284a80,0x66000096,0x204a60ff
-	.long	0xffffeeee,0x082e0001,0xffa0662c,0x44eeffa8
-	.long	0xb04442ee,0xffa84a01,0x6608362e,0xffb83d80
-	.long	0x34c2206e,0xffb451c1,0x082e0005,0x000456c0
-	.long	0x61ffffff,0xeefe4e75,0x44eeffa8,0xb08442ee
-	.long	0xffa84a01,0x6608362e,0xffb82d80,0x34c0206e
-	.long	0xffb450c1,0x082e0005,0x000456c0,0x61ffffff
-	.long	0xeed24e75,0x4e7b6000,0x4e7b6001,0x0c2e00fc
-	.long	0xffa167ff,0xffffff24,0x206effb4,0x082e0001
-	.long	0xffa056c7,0x6000ff40,0x4e7b6000,0x4e7b6001
-	.long	0x24482f00,0x61ffffff,0xf264201f,0x588f518f
-	.long	0x518e721a,0x41ef0008,0x43ef0000,0x22d851c9
-	.long	0xfffc3d7c,0x4008000a,0x2d4a000c,0x2d400010
-	.long	0x4cee3fff,0xffc04e5e,0x60ffffff,0xedf84280
-	.long	0x43fb0170,0x000005ae,0xb3c86d0e,0x43fb0170
-	.long	0x00000010,0xb1c96d02,0x4e7570ff,0x4e754a06
-	.long	0x66047001,0x60027005,0x4a076700,0x01e42448
-	.long	0x26492848,0x2a49568c,0x568d220a,0x40c7007c
-	.long	0x07004e7a,0x60004e7b,0x00004e7b,0x0001f58a
-	.long	0xf58cf58b,0xf58df46a,0xf46cf46b,0xf46d2441
-	.long	0x56812841,0xf5caf5cc,0x247c8000,0x0000267c
-	.long	0xa0000000,0x287c0000,0x00002008,0x02000003
-	.long	0x671c0c00,0x00026700,0x00966000,0x010251fc
-	.long	0x4e7ba008,0x0e911000,0x0e900000,0x6002600e
-	.long	0xb082661c,0xb2836618,0x0e915800,0x6002600e
-	.long	0x4e7bb008,0x0e904800,0x4e7bc008,0x6034600e
-	.long	0x4e7bb008,0x0e900800,0x4e7bc008,0x6012600e
-	.long	0x4e714e71,0x4e714e71,0x4e714e71,0x4e7160b0
-	.long	0x4e7b6000,0x4e7b6001,0x46c751c4,0x60ffffff
-	.long	0xfd424e7b,0x60004e7b,0x600146c7,0x50c460ff
-	.long	0xfffffd30,0x51fc51fc,0x51fc51fc,0x51fc51fc
-	.long	0x4e7ba008,0x0e911000,0x0e900000,0x6002600e
-	.long	0xb082662c,0xb2836628,0x0e915800,0x6002600e
-	.long	0x48440e58,0x48004e7b,0xb0084844,0x6002600e
-	.long	0x0e504800,0x4e7bc008,0x6000ffa8,0x4e71600e
-	.long	0x48400e58,0x08004e7b,0xb0084840,0x6002600e
-	.long	0x0e500800,0x4e7bc008,0x6000ff76,0x4e71600e
-	.long	0x4e714e71,0x4e714e71,0x4e714e71,0x4e716090
-	.long	0x4e7ba008,0x0e911000,0x0e900000,0x6002600e
-	.long	0xb082663c,0xb2836638,0x0e915800,0x6002600e
-	.long	0xe19c0e18,0x48004844,0x0e584800,0x6002600e
-	.long	0xe19c4e7b,0xb0080e10,0x48006004,0x4e71600e
-	.long	0x4e7bc008,0x6000ff2c,0x4e714e71,0x4e71600e
-	.long	0xe1980e18,0x08004840,0x0e580800,0x6002600e
-	.long	0xe1984e7b,0xb0080e10,0x08006004,0x4e71600e
-	.long	0x4e7bc008,0x6000feea,0x4e714e71,0x4e71600c
-	.long	0x4e714e71,0x4e714e71,0x4e714e71,0x6000ff72
-	.long	0x24482649,0x28482a49,0x528c528d,0x220a40c7
-	.long	0x007c0700,0x4e7a6000,0x4e7b0000,0x4e7b0001
-	.long	0xf58af58c,0xf58bf58d,0xf46af46c,0xf46bf46d
-	.long	0x24415681,0x2841f5ca,0xf5cc247c,0x80000000
-	.long	0x267ca000,0x0000287c,0x00000000,0x20080800
-	.long	0x00006600,0x009a6016,0x51fc51fc,0x51fc51fc
-	.long	0x4e7ba008,0x0e511000,0x0e500000,0x6002600e
-	.long	0xb042661c,0xb2436618,0x0e515800,0x6002600e
-	.long	0x4e7bb008,0x0e504800,0x4e7bc008,0x6034600e
-	.long	0x4e7bb008,0x0e500800,0x4e7bc008,0x6012600e
-	.long	0x4e714e71,0x4e714e71,0x4e714e71,0x4e7160b0
-	.long	0x4e7b6000,0x4e7b6001,0x46c751c4,0x60ffffff
-	.long	0xfb624e7b,0x60004e7b,0x600146c7,0x50c460ff
-	.long	0xfffffb50,0x51fc51fc,0x51fc51fc,0x51fc51fc
-	.long	0x4e7ba008,0x0e511000,0x0e500000,0x6002600e
-	.long	0xb042662c,0xb2436628,0x0e515800,0x6002600e
-	.long	0xe09c0e18,0x48004e7b,0xb008e19c,0x6002600e
-	.long	0x0e104800,0x4e7bc008,0x6000ffa8,0x4e71600e
-	.long	0xe0980e18,0x08004e7b,0xb008e198,0x6002600e
-	.long	0x0e100800,0x4e7bc008,0x6000ff76,0x4e71600e
-	.long	0x4e714e71,0x4e714e71,0x4e714e71,0x4e716090
-	.long	0x4a066604,0x70016002,0x70054a07,0x660000c6
-	.long	0x22482448,0x528a2602,0xe04a40c7,0x007c0700
-	.long	0x4e7a6000,0x4e7b0000,0x4e7b0001,0xf589f58a
-	.long	0xf469f46a,0x227c8000,0x0000247c,0xa0000000
-	.long	0x267c0000,0x00006016,0x51fc51fc,0x51fc51fc
-	.long	0x4e7b9008,0x0e500000,0xb0446624,0x6002600e
-	.long	0x0e182800,0x4e7ba008,0x0e103800,0x6002600e
-	.long	0x4e7bb008,0x604c4e71,0x4e714e71,0x4e71600e
-	.long	0xe0980e18,0x08004e7b,0xa008e198,0x6002600e
-	.long	0x0e100800,0x4e7bb008,0x60164e71,0x4e71600e
-	.long	0x4e714e71,0x4e714e71,0x4e714e71,0x4e7160a0
-	.long	0x4e7b6000,0x4e7b6001,0x46c751c1,0x60ffffff
-	.long	0xfb164e7b,0x60004e7b,0x600146c7,0x50c160ff
-	.long	0xfffffb04,0x22482448,0x568a2208,0x08010000
-	.long	0x660000c2,0x26024842,0x40c7007c,0x07004e7a
-	.long	0x60004e7b,0x00004e7b,0x0001f589,0xf58af469
-	.long	0xf46a227c,0x80000000,0x247ca000,0x0000267c
-	.long	0x00000000,0x601851fc,0x51fc51fc,0x51fc51fc
-	.long	0x4e7b9008,0x0e900000,0xb0846624,0x6002600e
-	.long	0x0e582800,0x4e7ba008,0x0e503800,0x6002600e
-	.long	0x4e7bb008,0x604c4e71,0x4e714e71,0x4e71600e
-	.long	0x48400e58,0x08004840,0x4e7ba008,0x6002600e
-	.long	0x0e500800,0x4e7bb008,0x60164e71,0x4e71600e
-	.long	0x4e714e71,0x4e714e71,0x4e714e71,0x4e7160a0
-	.long	0x4e7b6000,0x4e7b6001,0x46c751c1,0x60ffffff
-	.long	0xfa464e7b,0x60004e7b,0x600146c7,0x50c160ff
-	.long	0xfffffa34,0x2a02e08a,0x26024842,0x40c7007c
-	.long	0x07004e7a,0x60004e7b,0x00004e7b,0x0001f589
-	.long	0xf58af469,0xf46a227c,0x80000000,0x247ca000
-	.long	0x0000267c,0x00000000,0x601451fc,0x51fc51fc
-	.long	0x4e7b9008,0x0e900000,0xb0846624,0x6002600e
-	.long	0x0e182800,0x0e583800,0x4e7ba008,0x6002600e
-	.long	0x0e105800,0x4e7bb008,0x6000ff88,0x4e71600e
-	.long	0xe1980e18,0x08004840,0x0e580800,0x6002600e
-	.long	0xe1984e7b,0xa0080e10,0x08006004,0x4e71600e
-	.long	0x4e7bb008,0x6000ff4a,0x4e714e71,0x4e71600e
-	.long	0x4e714e71,0x4e714e71,0x4e714e71,0x4e716090
diff --git a/ANDROID_3.4.5/arch/m68k/ifpsp060/itest.sa b/ANDROID_3.4.5/arch/m68k/ifpsp060/itest.sa
deleted file mode 100644
index 7b15eaf6..00000000
--- a/ANDROID_3.4.5/arch/m68k/ifpsp060/itest.sa
+++ /dev/null
@@ -1,1281 +0,0 @@
-	dc.l	$60ff0000,$005c5465,$7374696e,$67203638
-	dc.l	$30363020,$49535020,$73746172,$7465643a
-	dc.l	$0a007061,$73736564,$0a002066,$61696c65
-	dc.l	$640a0000,$4a80660e,$487affe8,$61ff0000
-	dc.l	$4f9a588f,$4e752f01,$61ff0000,$4fa4588f
-	dc.l	$487affd8,$61ff0000,$4f82588f,$4e754e56
-	dc.l	$ff6048e7,$3f3c487a,$ff9e61ff,$00004f6c
-	dc.l	$588f42ae,$ff78487b,$01700000,$00ea61ff
-	dc.l	$00004f58,$588f61ff,$000000f0,$61ffffff
-	dc.l	$ffa642ae,$ff78487b,$01700000,$0af661ff
-	dc.l	$00004f38,$588f61ff,$00000af8,$61ffffff
-	dc.l	$ff8642ae,$ff78487b,$01700000,$179c61ff
-	dc.l	$00004f18,$588f61ff,$0000179c,$61ffffff
-	dc.l	$ff6642ae,$ff78487b,$01700000,$038661ff
-	dc.l	$00004ef8,$588f61ff,$00000380,$61ffffff
-	dc.l	$ff4642ae,$ff78487b,$01700000,$202c61ff
-	dc.l	$00004ed8,$588f2d7c,$00000002,$ff7461ff
-	dc.l	$0000202c,$61ffffff,$ff1e42ae,$ff78487b
-	dc.l	$01700000,$0d7c61ff,$00004eb0,$588f61ff
-	dc.l	$00000d74,$61ffffff,$fefe42ae,$ff78487b
-	dc.l	$01700000,$0f8e61ff,$00004e90,$588f61ff
-	dc.l	$00000f88,$61ffffff,$fede4cdf,$3cfc4e5e
-	dc.l	$4e750936,$342d6269,$74206d75,$6c746970
-	dc.l	$6c792e2e,$2e0051fc,$52aeff78,$4cfb3fff
-	dc.l	$01700000,$4e184281,$243c9999,$9999263c
-	dc.l	$88888888,$3d7c0004,$ff7c44fc,$000048ee
-	dc.l	$7fffff80,$4c013402,$42eeff7e,$48ee7fff
-	dc.l	$ffc042ae,$ff8842ae,$ff8c61ff,$00004da6
-	dc.l	$4a0066ff,$00004dcc,$52aeff78,$4cfb3fff
-	dc.l	$01700000,$4dc8223c,$77777777,$243c9999
-	dc.l	$99997600,$3d7c0004,$ff7c44fc,$000048ee
-	dc.l	$7fffff80,$4c013402,$42eeff7e,$48ee7fff
-	dc.l	$ffc042ae,$ff8842ae,$ff8c61ff,$00004d56
-	dc.l	$4a0066ff,$00004d7c,$52aeff78,$4cfb3fff
-	dc.l	$01700000,$4d787210,$243c6666,$66663d7c
-	dc.l	$0000ff7c,$44fc0000,$48ee7fff,$ff804c01
-	dc.l	$240242ee,$ff7e48ee,$7fffffc0,$2d7c0000
-	dc.l	$0006ff88,$61ff0000,$4d0c4a00,$66ff0000
-	dc.l	$4d3252ae,$ff784cfb,$3fff0170,$00004d2e
-	dc.l	$223c5555,$55557400,$76033d7c,$0000ff7c
-	dc.l	$44fc0000,$48ee7fff,$ff804c01,$340242ee
-	dc.l	$ff7e48ee,$7fffffc0,$2d7c0000,$0000ff88
-	dc.l	$2d7cffff,$ffffff8c,$61ff0000,$4cb84a00
-	dc.l	$66ff0000,$4cde52ae,$ff784cfb,$3fff0170
-	dc.l	$00004cda,$223c4000,$00007400,$76043d7c
-	dc.l	$0000ff7c,$44fc0000,$48ee7fff,$ff804c01
-	dc.l	$340242ee,$ff7e48ee,$7fffffc0,$2d7c0000
-	dc.l	$0001ff88,$2d7c0000,$0000ff8c,$61ff0000
-	dc.l	$4c644a00,$66ff0000,$4c8a52ae,$ff784cfb
-	dc.l	$3fff0170,$00004c86,$72ff7400,$76ff3d7c
-	dc.l	$0008ff7c,$44fc0000,$48ee7fff,$ff804c01
-	dc.l	$340242ee,$ff7e48ee,$7fffffc0,$2d7cffff
-	dc.l	$fffeff88,$2d7c0000,$0001ff8c,$61ff0000
-	dc.l	$4c144a00,$66ff0000,$4c3a52ae,$ff784cfb
-	dc.l	$3fff0170,$00004c36,$223c8000,$00007400
-	dc.l	$76ff3d7c,$0000ff7c,$44fc0000,$48ee7fff
-	dc.l	$ff804c01,$3c0242ee,$ff7e48ee,$7fffffc0
-	dc.l	$2d7c0000,$0000ff88,$2d7c8000,$0000ff8c
-	dc.l	$61ff0000,$4bc04a00,$66ff0000,$4be652ae
-	dc.l	$ff784cfb,$3fff0170,$00004be2,$223c8000
-	dc.l	$00007400,$76013d7c,$0008ff7c,$44fc0000
-	dc.l	$48ee7fff,$ff804c01,$3c0242ee,$ff7e48ee
-	dc.l	$7fffffc0,$2d7cffff,$ffffff88,$2d7c8000
-	dc.l	$0000ff8c,$61ff0000,$4b6c4a00,$66ff0000
-	dc.l	$4b9252ae,$ff784cfb,$3fff0170,$00004b8e
-	dc.l	$72017400,$263c8000,$00003d7c,$0008ff7c
-	dc.l	$44fc0000,$48ee7fff,$ff804c01,$3c0242ee
-	dc.l	$ff7e48ee,$7fffffc0,$2d7cffff,$ffffff88
-	dc.l	$2d7c8000,$0000ff8c,$61ff0000,$4b184a00
-	dc.l	$66ff0000,$4b3e222e,$ff784280,$4e75096d
-	dc.l	$6f766570,$2e2e2e00,$52aeff78,$4cfb3fff
-	dc.l	$01700000,$4b2841ee,$ff60303c,$aaaa4228
-	dc.l	$00004228,$00023d7c,$001fff7c,$44fc001f
-	dc.l	$48ee7fff,$ff800188,$000042ee,$ff7e48ee
-	dc.l	$7fffffc0,$12280002,$e1491228,$0000b041
-	dc.l	$66ff0000,$4ade61ff,$00004aaa,$4a0066ff
-	dc.l	$00004ad0,$52aeff78,$4cfb3fff,$01700000
-	dc.l	$4acc41ee,$ff64303c,$aaaa42a8,$fffc4290
-	dc.l	$42a80004,$3d7c001f,$ff7c44fc,$001f48ee
-	dc.l	$7fffff80,$01880000,$42eeff7e,$48ee7fff
-	dc.l	$ffc04aa8,$fffc66ff,$00004a88,$4aa80004
-	dc.l	$66ff0000,$4a7e0c90,$aa00aa00,$66ff0000
-	dc.l	$4a7261ff,$00004a3e,$4a0066ff,$00004a64
-	dc.l	$52aeff78,$4cfb3fff,$01700000,$4a6041ee
-	dc.l	$ff60303c,$aaaa4228,$00004228,$00023d7c
-	dc.l	$0000ff7c,$44fc0000,$48ee7fff,$ff800188
-	dc.l	$000042ee,$ff7e48ee,$7fffffc0,$12280002
-	dc.l	$e1491228,$0000b041,$66ff0000,$4a1661ff
-	dc.l	$000049e2,$4a0066ff,$00004a08,$52aeff78
-	dc.l	$4cfb3fff,$01700000,$4a0441ee,$ff60117c
-	dc.l	$00aa0000,$117c00aa,$00023d7c,$001fff7c
-	dc.l	$44fc001f,$48ee7fff,$ff800108,$000042ee
-	dc.l	$ff7e48ee,$7fffffc0,$3d7caaaa,$ff82323c
-	dc.l	$aaaab041,$66ff0000,$49ba61ff,$00004986
-	dc.l	$4a0066ff,$000049ac,$52aeff78,$4cfb3fff
-	dc.l	$01700000,$49a841ee,$ff60203c,$aaaaaaaa
-	dc.l	$42280000,$42280002,$42280004,$42280006
-	dc.l	$3d7c001f,$ff7c44fc,$001f48ee,$7fffff80
-	dc.l	$01c80000,$42eeff7e,$48ee7fff,$ffc01228
-	dc.l	$0006e189,$12280004,$e1891228,$0002e189
-	dc.l	$12280000,$b08166ff,$00004948,$61ff0000
-	dc.l	$49144a00,$66ff0000,$493a52ae,$ff784cfb
-	dc.l	$3fff0170,$00004936,$41eeff64,$203caaaa
-	dc.l	$aaaa42a8,$fffc4290,$42a80004,$42a80008
-	dc.l	$3d7c001f,$ff7c44fc,$001f48ee,$7fffff80
-	dc.l	$01c80000,$42eeff7e,$48ee7fff,$ffc04aa8
-	dc.l	$fffc66ff,$000048ec,$4aa80008,$66ff0000
-	dc.l	$48e20c90,$aa00aa00,$66ff0000,$48d60ca8
-	dc.l	$aa00aa00,$000466ff,$000048c8,$61ff0000
-	dc.l	$48944a00,$66ff0000,$48ba52ae,$ff784cfb
-	dc.l	$3fff0170,$000048b6,$41eeff60,$117c00aa
-	dc.l	$0000117c,$00aa0002,$117c00aa,$0004117c
-	dc.l	$00aa0006,$3d7c001f,$ff7c44fc,$001f48ee
-	dc.l	$7fffff80,$01480000,$42eeff7e,$48ee7fff
-	dc.l	$ffc02d7c,$aaaaaaaa,$ff80223c,$aaaaaaaa
-	dc.l	$b08166ff,$0000485c,$61ff0000,$48284a00
-	dc.l	$66ff0000,$484e52ae,$ff784cfb,$3fff0170
-	dc.l	$0000484a,$41eeff60,$3e3caaaa,$42280000
-	dc.l	$42280002,$3d7c001f,$ff7c44fc,$001f48ee
-	dc.l	$7fffff80,$0f880000,$42eeff7e,$48ee7fff
-	dc.l	$ffc01228,$0002e149,$12280000,$be4166ff
-	dc.l	$00004800,$61ff0000,$47cc4a00,$66ff0000
-	dc.l	$47f252ae,$ff784cfb,$3fff0170,$000047ee
-	dc.l	$41eeff60,$117c00aa,$0000117c,$00aa0002
-	dc.l	$3d7c001f,$ff7c44fc,$001f48ee,$7fffff80
-	dc.l	$0f080000,$42eeff7e,$48ee7fff,$ffc03d7c
-	dc.l	$aaaaff9e,$323caaaa,$be4166ff,$000047a4
-	dc.l	$61ff0000,$47704a00,$66ff0000,$479652ae
-	dc.l	$ff784cfb,$3fff0170,$00004792,$41eeff60
-	dc.l	$303caaaa,$42280000,$42280002,$3d7c001f
-	dc.l	$ff7c44fc,$001f48ee,$7fffff80,$01880000
-	dc.l	$42eeff7e,$48ee7fff,$ffc01228,$0002e149
-	dc.l	$12280000,$b04166ff,$00004748,$61ff0000
-	dc.l	$47144a00,$66ff0000,$473a52ae,$ff784cfb
-	dc.l	$3fff0170,$00004736,$41eeff60,$303caaaa
-	dc.l	$42280008,$4228000a,$3d7c001f,$ff7c44fc
-	dc.l	$001f48ee,$7fffff80,$01880008,$42eeff7e
-	dc.l	$48ee7fff,$ffc01228,$000ae149,$12280008
-	dc.l	$b04166ff,$000046ec,$61ff0000,$46b84a00
-	dc.l	$66ff0000,$46de52ae,$ff784cfb,$3fff0170
-	dc.l	$000046da,$41eeff60,$117c00aa,$0008117c
-	dc.l	$00aa000a,$3d7c001f,$ff7c44fc,$001f48ee
-	dc.l	$7fffff80,$01080008,$42eeff7e,$48ee7fff
-	dc.l	$ffc03d7c,$aaaaff82,$323caaaa,$b04166ff
-	dc.l	$00004690,$61ff0000,$465c4a00,$66ff0000
-	dc.l	$468252ae,$ff784cfb,$3fff0170,$0000467e
-	dc.l	$41eeff60,$203caaaa,$aaaa4228,$00084228
-	dc.l	$000a4228,$000c4228,$000e3d7c,$001fff7c
-	dc.l	$44fc001f,$48ee7fff,$ff8001c8,$000842ee
-	dc.l	$ff7e48ee,$7fffffc0,$1228000e,$e1891228
-	dc.l	$000ce189,$1228000a,$e1891228,$0008b081
-	dc.l	$66ff0000,$461e61ff,$000045ea,$4a0066ff
-	dc.l	$00004610,$52aeff78,$4cfb3fff,$01700000
-	dc.l	$460c41ee,$ff60117c,$00aa0008,$117c00aa
-	dc.l	$000a117c,$00aa000c,$117c00aa,$000e3d7c
-	dc.l	$001fff7c,$44fc001f,$48ee7fff,$ff800148
-	dc.l	$000842ee,$ff7e48ee,$7fffffc0,$2d7caaaa
-	dc.l	$aaaaff80,$223caaaa,$aaaab081,$66ff0000
-	dc.l	$45b261ff,$0000457e,$4a0066ff,$000045a4
-	dc.l	$52aeff78,$4cfb3fff,$01700000,$45a041ee
-	dc.l	$ff68303c,$aaaa4228,$fff84228,$fffa3d7c
-	dc.l	$001fff7c,$44fc001f,$48ee7fff,$ff800188
-	dc.l	$fff842ee,$ff7e48ee,$7fffffc0,$1228fffa
-	dc.l	$e1491228,$fff8b041,$66ff0000,$455661ff
-	dc.l	$00004522,$4a0066ff,$00004548,$52aeff78
-	dc.l	$4cfb3fff,$01700000,$454441ee,$ff68117c
-	dc.l	$00aafff8,$117c00aa,$fffa3d7c,$001fff7c
-	dc.l	$44fc001f,$48ee7fff,$ff800108,$fff842ee
-	dc.l	$ff7e48ee,$7fffffc0,$3d7caaaa,$ff82323c
-	dc.l	$aaaab041,$66ff0000,$44fa61ff,$000044c6
-	dc.l	$4a0066ff,$000044ec,$52aeff78,$4cfb3fff
-	dc.l	$01700000,$44e841ee,$ff68203c,$aaaaaaaa
-	dc.l	$4228fff8,$4228fffa,$4228fffc,$42280000
-	dc.l	$3d7c001f,$ff7c44fc,$001f48ee,$7fffff80
-	dc.l	$01c8fff8,$42eeff7e,$48ee7fff,$ffc01228
-	dc.l	$fffee189,$1228fffc,$e1891228,$fffae189
-	dc.l	$1228fff8,$b08166ff,$00004488,$61ff0000
-	dc.l	$44544a00,$66ff0000,$447a52ae,$ff784cfb
-	dc.l	$3fff0170,$00004476,$41eeff68,$117c00aa
-	dc.l	$fff8117c,$00aafffa,$117c00aa,$fffc117c
-	dc.l	$00aa0000,$3d7c001f,$ff7c44fc,$001f48ee
-	dc.l	$7fffff80,$0148fff8,$42eeff7e,$48ee7fff
-	dc.l	$ffc02d7c,$aaaaaaaa,$ff80223c,$aaaaaaaa
-	dc.l	$b08166ff,$0000441c,$61ff0000,$43e84a00
-	dc.l	$66ff0000,$440e222e,$ff784280,$4e750936
-	dc.l	$342d6269,$74206469,$76696465,$2e2e2e00
-	dc.l	$52aeff78,$52aeff78,$4cfb3fff,$01700000
-	dc.l	$43ec7201,$74007600,$3d7c0014,$ff7c44fc
-	dc.l	$001f48ee,$7fffff80,$4c413402,$42eeff7e
-	dc.l	$48ee7fff,$ffc061ff,$0000438a,$4a0066ff
-	dc.l	$000043b0,$52aeff78,$4cfb3fff,$01700000
-	dc.l	$43ac223c,$44444444,$7400263c,$55555555
-	dc.l	$3d7c0010,$ff7c44fc,$001f48ee,$7fffff80
-	dc.l	$4c413402,$42eeff7e,$48ee7fff,$ffc02d7c
-	dc.l	$11111111,$ff882d7c,$00000001,$ff8c61ff
-	dc.l	$00004332,$4a0066ff,$00004358,$52aeff78
-	dc.l	$4cfb3fff,$01700000,$4354223c,$55555555
-	dc.l	$7400263c,$44444444,$3d7c0014,$ff7c44fc
-	dc.l	$001f48ee,$7fffff80,$4c413402,$42eeff7e
-	dc.l	$48ee7fff,$ffc02d7c,$44444444,$ff882d7c
-	dc.l	$00000000,$ff8c61ff,$000042da,$4a0066ff
-	dc.l	$00004300,$52aeff78,$4cfb3fff,$01700000
-	dc.l	$42fc223c,$11111111,$243c4444,$4444263c
-	dc.l	$44444444,$3d7c001e,$ff7c44fc,$001d48ee
-	dc.l	$7fffff80,$4c413402,$42eeff7e,$48ee7fff
-	dc.l	$ffc061ff,$0000428e,$4a0066ff,$000042b4
-	dc.l	$52aeff78,$4cfb3fff,$01700000,$42b072fe
-	dc.l	$74017602,$3d7c001e,$ff7c44fc,$001d48ee
-	dc.l	$7fffff80,$4c413c02,$42eeff7e,$48ee7fff
-	dc.l	$ffc061ff,$0000424e,$4a0066ff,$00004274
-	dc.l	$52aeff78,$4cfb3fff,$01700000,$427072fe
-	dc.l	$74017600,$3d7c0018,$ff7c44fc,$001d48ee
-	dc.l	$7fffff80,$4c413c02,$42eeff7e,$48ee7fff
-	dc.l	$ffc02d7c,$00000000,$ff882d7c,$80000000
-	dc.l	$ff8c61ff,$000041fe,$4a0066ff,$00004224
-	dc.l	$52aeff78,$4cfb3fff,$01700000,$42207202
-	dc.l	$74017600,$3d7c001e,$ff7c44fc,$001d48ee
-	dc.l	$7fffff80,$4c413c02,$42eeff7e,$48ee7fff
-	dc.l	$ffc061ff,$000041be,$4a0066ff,$000041e4
-	dc.l	$52aeff78,$4cfb3fff,$01700000,$41e072ff
-	dc.l	$74fe76ff,$3d7c0008,$ff7c44fc,$000048ee
-	dc.l	$7fffff80,$4c413402,$42eeff7e,$48ee7fff
-	dc.l	$ffc061ff,$0000417e,$4a0066ff,$000041a4
-	dc.l	$52aeff78,$4cfb3fff,$01700000,$41a072ff
-	dc.l	$74fe76ff,$3d7c0008,$ff7c44fc,$000048ee
-	dc.l	$7fffff80,$4c7c2402,$ffffffff,$42eeff7e
-	dc.l	$48ee7fff,$ffc02d7c,$ffffffff,$ff8861ff
-	dc.l	$00004132,$4a0066ff,$00004158,$52aeff78
-	dc.l	$4cfb3fff,$01700000,$4154223c,$0000ffff
-	dc.l	$7401263c,$55555555,$3d7c0000,$ff7c44fc
-	dc.l	$000048ee,$7fffff80,$4c413402,$42eeff7e
-	dc.l	$48ee7fff,$ffc02d7c,$0000aaab,$ff882d7c
-	dc.l	$00015556,$ff8c61ff,$000040da,$4a0066ff
-	dc.l	$00004100,$222eff78,$42804e75,$09636173
-	dc.l	$2e2e2e00,$52aeff78,$4cfb3fff,$01700000
-	dc.l	$40ec41ee,$ff6130bc,$aaaa323c,$aaaa343c
-	dc.l	$bbbb3d7c,$0014ff7c,$44fc0010,$48ee7fff
-	dc.l	$ff800cd0,$008142ee,$ff7e3610,$3d7cbbbb
-	dc.l	$ff8e48ee,$7fffffc0,$61ff0000,$40784a00
-	dc.l	$66ff0000,$409e52ae,$ff784cfb,$3fff0170
-	dc.l	$0000409a,$41eeff61,$30bceeee,$323caaaa
-	dc.l	$343cbbbb,$3d7c0000,$ff7c44fc,$000048ee
-	dc.l	$7fffff80,$0cd00081,$42eeff7e,$36103d7c
-	dc.l	$eeeeff86,$3d7ceeee,$ff8e48ee,$7fffffc0
-	dc.l	$61ff0000,$40204a00,$66ff0000,$404652ae
-	dc.l	$ff784cfb,$3fff0170,$00004042,$41eeff62
-	dc.l	$20bcaaaa,$aaaa223c,$aaaaaaaa,$243cbbbb
-	dc.l	$bbbb3d7c,$0004ff7c,$44fc0000,$48ee7fff
-	dc.l	$ff800ed0,$008142ee,$ff7e2610,$2d7cbbbb
-	dc.l	$bbbbff8c,$48ee7fff,$ffc061ff,$00003fc6
-	dc.l	$4a0066ff,$00003fec,$52aeff78,$4cfb3fff
-	dc.l	$01700000,$3fe841ee,$ff6220bc,$eeeeeeee
-	dc.l	$223caaaa,$aaaa243c,$bbbbbbbb,$3d7c0000
-	dc.l	$ff7c44fc,$000048ee,$7fffff80,$0ed00081
-	dc.l	$42eeff7e,$26102d7c,$eeeeeeee,$ff842d7c
-	dc.l	$eeeeeeee,$ff8c48ee,$7fffffc0,$61ff0000
-	dc.l	$3f644a00,$66ff0000,$3f8a52ae,$ff784cfb
-	dc.l	$3fff0170,$00003f86,$41eeff61,$20bcaaaa
-	dc.l	$aaaa223c,$aaaaaaaa,$243cbbbb,$bbbb3d7c
-	dc.l	$0004ff7c,$44fc0000,$48ee7fff,$ff800ed0
-	dc.l	$008142ee,$ff7e2610,$2d7cbbbb,$bbbbff8c
-	dc.l	$48ee7fff,$ffc061ff,$00003f0a,$4a0066ff
-	dc.l	$00003f30,$52aeff78,$4cfb3fff,$01700000
-	dc.l	$3f2c41ee,$ff6120bc,$7fffffff,$223c8000
-	dc.l	$0000243c,$bbbbbbbb,$3d7c001b,$ff7c44fc
-	dc.l	$001048ee,$7fffff80,$0ed00081,$42eeff7e
-	dc.l	$26102d7c,$7fffffff,$ff842d7c,$7fffffff
-	dc.l	$ff8c48ee,$7fffffc0,$61ff0000,$3ea84a00
-	dc.l	$66ff0000,$3ece222e,$ff784280,$4e750963
-	dc.l	$6173322e,$2e2e0000,$52aeff78,$4cfb3fff
-	dc.l	$01700000,$3eb841ee,$ff6043ee,$ff6420bc
-	dc.l	$aaaaaaaa,$22bcbbbb,$bbbb223c,$aaaaaaaa
-	dc.l	$243cbbbb,$bbbb263c,$cccccccc,$283cdddd
-	dc.l	$dddd3d7c,$0014ff7c,$44fc0010,$48ee7fff
-	dc.l	$ff800efc,$80c19102,$42eeff7e,$2a102c11
-	dc.l	$2d7ccccc,$ccccff94,$2d7cdddd,$ddddff98
-	dc.l	$48ee7fff,$ffc061ff,$00003e1a,$4a0066ff
-	dc.l	$00003e40,$52aeff78,$4cfb3fff,$01700000
-	dc.l	$3e3c41ee,$ff6143ee,$ff6520bc,$aaaaaaaa
-	dc.l	$22bcbbbb,$bbbb223c,$aaaaaaaa,$243cbbbb
-	dc.l	$bbbb263c,$cccccccc,$283cdddd,$dddd3d7c
-	dc.l	$0014ff7c,$44fc0010,$48ee7fff,$ff800efc
-	dc.l	$80c19102,$42eeff7e,$2a102c11,$2d7ccccc
-	dc.l	$ccccff94,$2d7cdddd,$ddddff98,$48ee7fff
-	dc.l	$ffc061ff,$00003d9e,$4a0066ff,$00003dc4
-	dc.l	$52aeff78,$4cfb3fff,$01700000,$3dc041ee
-	dc.l	$ff6243ee,$ff6620bc,$aaaaaaaa,$22bcbbbb
-	dc.l	$bbbb223c,$aaaaaaaa,$243cbbbb,$bbbb263c
-	dc.l	$cccccccc,$283cdddd,$dddd3d7c,$0014ff7c
-	dc.l	$44fc0010,$48ee7fff,$ff800efc,$80c19102
-	dc.l	$42eeff7e,$2a102c11,$2d7ccccc,$ccccff94
-	dc.l	$2d7cdddd,$ddddff98,$48ee7fff,$ffc061ff
-	dc.l	$00003d22,$4a0066ff,$00003d48,$52aeff78
-	dc.l	$4cfb3fff,$01700000,$3d4441ee,$ff6043ee
-	dc.l	$ff6420bc,$eeeeeeee,$22bcbbbb,$bbbb223c
-	dc.l	$aaaaaaaa,$243cbbbb,$bbbb263c,$cccccccc
-	dc.l	$283cdddd,$dddd3d7c,$0000ff7c,$44fc0000
-	dc.l	$48ee7fff,$ff800efc,$80c19102,$42eeff7e
-	dc.l	$2a102c11,$2d7ceeee,$eeeeff84,$2d7cbbbb
-	dc.l	$bbbbff88,$2d7ceeee,$eeeeff94,$2d7cbbbb
-	dc.l	$bbbbff98,$48ee7fff,$ffc061ff,$00003c96
-	dc.l	$4a0066ff,$00003cbc,$52aeff78,$4cfb3fff
-	dc.l	$01700000,$3cb841ee,$ff6143ee,$ff6520bc
-	dc.l	$eeeeeeee,$22bcbbbb,$bbbb223c,$aaaaaaaa
-	dc.l	$243cbbbb,$bbbb263c,$cccccccc,$283cdddd
-	dc.l	$dddd3d7c,$0000ff7c,$44fc0000,$48ee7fff
-	dc.l	$ff800efc,$80c19102,$42eeff7e,$2a102c11
-	dc.l	$2d7ceeee,$eeeeff84,$2d7cbbbb,$bbbbff88
-	dc.l	$2d7ceeee,$eeeeff94,$2d7cbbbb,$bbbbff98
-	dc.l	$48ee7fff,$ffc061ff,$00003c0a,$4a0066ff
-	dc.l	$00003c30,$52aeff78,$4cfb3fff,$01700000
-	dc.l	$3c2c41ee,$ff6243ee,$ff6620bc,$eeeeeeee
-	dc.l	$22bcbbbb,$bbbb223c,$aaaaaaaa,$243cbbbb
-	dc.l	$bbbb263c,$cccccccc,$283cdddd,$dddd3d7c
-	dc.l	$0000ff7c,$44fc0000,$48ee7fff,$ff800efc
-	dc.l	$80c19102,$42eeff7e,$2a102c11,$2d7ceeee
-	dc.l	$eeeeff84,$2d7cbbbb,$bbbbff88,$2d7ceeee
-	dc.l	$eeeeff94,$2d7cbbbb,$bbbbff98,$48ee7fff
-	dc.l	$ffc061ff,$00003b7e,$4a0066ff,$00003ba4
-	dc.l	$52aeff78,$4cfb3fff,$01700000,$3ba041ee
-	dc.l	$ff6043ee,$ff6420bc,$aaaaaaaa,$22bceeee
-	dc.l	$eeee223c,$aaaaaaaa,$243cbbbb,$bbbb263c
-	dc.l	$cccccccc,$283cdddd,$dddd3d7c,$0000ff7c
-	dc.l	$44fc0000,$48ee7fff,$ff800efc,$80c19102
-	dc.l	$42eeff7e,$2a102c11,$2d7caaaa,$aaaaff84
-	dc.l	$2d7ceeee,$eeeeff88,$2d7caaaa,$aaaaff94
-	dc.l	$2d7ceeee,$eeeeff98,$48ee7fff,$ffc061ff
-	dc.l	$00003af2,$4a0066ff,$00003b18,$52aeff78
-	dc.l	$4cfb3fff,$01700000,$3b1441ee,$ff6143ee
-	dc.l	$ff6520bc,$aaaaaaaa,$22bceeee,$eeee223c
-	dc.l	$aaaaaaaa,$243cbbbb,$bbbb263c,$cccccccc
-	dc.l	$283cdddd,$dddd3d7c,$0000ff7c,$44fc0000
-	dc.l	$48ee7fff,$ff800efc,$80c19102,$42eeff7e
-	dc.l	$2a102c11,$2d7caaaa,$aaaaff84,$2d7ceeee
-	dc.l	$eeeeff88,$2d7caaaa,$aaaaff94,$2d7ceeee
-	dc.l	$eeeeff98,$48ee7fff,$ffc061ff,$00003a66
-	dc.l	$4a0066ff,$00003a8c,$52aeff78,$4cfb3fff
-	dc.l	$01700000,$3a8841ee,$ff6243ee,$ff6620bc
-	dc.l	$aaaaaaaa,$22bc7fff,$ffff223c,$aaaaaaaa
-	dc.l	$243c8000,$0000263c,$cccccccc,$283cdddd
-	dc.l	$dddd3d7c,$000bff7c,$44fc0000,$48ee7fff
-	dc.l	$ff800efc,$80c19102,$42eeff7e,$2a102c11
-	dc.l	$2d7caaaa,$aaaaff84,$2d7c7fff,$ffffff88
-	dc.l	$2d7caaaa,$aaaaff94,$2d7c7fff,$ffffff98
-	dc.l	$48ee7fff,$ffc061ff,$000039da,$4a0066ff
-	dc.l	$00003a00,$52aeff78,$4cfb3fff,$01700000
-	dc.l	$39fc41ee,$ff6043ee,$ff6430bc,$aaaa32bc
-	dc.l	$bbbb323c,$aaaa343c,$bbbb363c,$cccc383c
-	dc.l	$dddd3d7c,$0014ff7c,$44fc0010,$48ee7fff
-	dc.l	$ff800cfc,$80c19102,$42eeff7e,$3a103c11
-	dc.l	$3d7ccccc,$ff963d7c,$ddddff9a,$48ee7fff
-	dc.l	$ffc061ff,$0000396e,$4a0066ff,$00003994
-	dc.l	$52aeff78,$4cfb3fff,$01700000,$399041ee
-	dc.l	$ff6143ee,$ff6530bc,$aaaa32bc,$bbbb323c
-	dc.l	$aaaa343c,$bbbb363c,$cccc383c,$dddd3d7c
-	dc.l	$0004ff7c,$44fc0000,$48ee7fff,$ff800cfc
-	dc.l	$80c19102,$42eeff7e,$3a103c11,$3d7ccccc
-	dc.l	$ff963d7c,$ddddff9a,$48ee7fff,$ffc061ff
-	dc.l	$00003902,$4a0066ff,$00003928,$52aeff78
-	dc.l	$4cfb3fff,$01700000,$392441ee,$ff6043ee
-	dc.l	$ff6430bc,$eeee32bc,$bbbb323c,$aaaa343c
-	dc.l	$bbbb363c,$cccc383c,$dddd3d7c,$0000ff7c
-	dc.l	$44fc0000,$48ee7fff,$ff800cfc,$80c19102
-	dc.l	$42eeff7e,$3a103c11,$3d7ceeee,$ff863d7c
-	dc.l	$bbbbff8a,$3d7ceeee,$ff963d7c,$bbbbff9a
-	dc.l	$48ee7fff,$ffc061ff,$0000388a,$4a0066ff
-	dc.l	$000038b0,$52aeff78,$4cfb3fff,$01700000
-	dc.l	$38ac41ee,$ff6143ee,$ff6530bc,$eeee32bc
-	dc.l	$bbbb323c,$aaaa343c,$bbbb363c,$cccc383c
-	dc.l	$dddd3d7c,$0000ff7c,$44fc0000,$48ee7fff
-	dc.l	$ff800cfc,$80c19102,$42eeff7e,$3a103c11
-	dc.l	$3d7ceeee,$ff863d7c,$bbbbff8a,$3d7ceeee
-	dc.l	$ff963d7c,$bbbbff9a,$48ee7fff,$ffc061ff
-	dc.l	$00003812,$4a0066ff,$00003838,$52aeff78
-	dc.l	$4cfb3fff,$01700000,$383441ee,$ff6043ee
-	dc.l	$ff6430bc,$aaaa32bc,$eeee323c,$aaaa343c
-	dc.l	$bbbb363c,$cccc383c,$dddd3d7c,$0000ff7c
-	dc.l	$44fc0000,$48ee7fff,$ff800cfc,$80c19102
-	dc.l	$42eeff7e,$3a103c11,$3d7caaaa,$ff863d7c
-	dc.l	$eeeeff8a,$3d7caaaa,$ff963d7c,$eeeeff9a
-	dc.l	$48ee7fff,$ffc061ff,$0000379a,$4a0066ff
-	dc.l	$000037c0,$52aeff78,$4cfb3fff,$01700000
-	dc.l	$37bc41ee,$ff6143ee,$ff6530bc,$aaaa32bc
-	dc.l	$7fff323c,$aaaa343c,$8000363c,$cccc383c
-	dc.l	$dddd3d7c,$001bff7c,$44fc0010,$48ee7fff
-	dc.l	$ff800cfc,$80c19102,$42eeff7e,$3a103c11
-	dc.l	$3d7caaaa,$ff863d7c,$7fffff8a,$3d7caaaa
-	dc.l	$ff963d7c,$7fffff9a,$48ee7fff,$ffc061ff
-	dc.l	$00003722,$4a0066ff,$00003748,$222eff78
-	dc.l	$42804e75,$09636d70,$322c6368,$6b322e2e
-	dc.l	$2e0051fc,$52aeff78,$4cfb3fff,$01700000
-	dc.l	$372c3d7c,$2040ff60,$223c1111,$11203d7c
-	dc.l	$0004ff7c,$44fc0000,$48ee7fff,$ff8000ee
-	dc.l	$1000ff60,$42eeff7e,$48ee7fff,$ffc061ff
-	dc.l	$000036c2,$4a0066ff,$000036e8,$52aeff78
-	dc.l	$4cfb3fff,$01700000,$36e43d7c,$2040ff60
-	dc.l	$227c0000,$00403d7c,$0004ff7c,$44fc0000
-	dc.l	$48ee7fff,$ff8000ee,$9000ff60,$42eeff7e
-	dc.l	$48ee7fff,$ffc061ff,$0000367a,$4a0066ff
-	dc.l	$000036a0,$52aeff78,$4cfb3fff,$01700000
-	dc.l	$369c3d7c,$2040ff60,$223c1111,$11303d7c
-	dc.l	$0000ff7c,$44fc0000,$48ee7fff,$ff8000ee
-	dc.l	$1800ff60,$42eeff7e,$48ee7fff,$ffc061ff
-	dc.l	$00003632,$4a0066ff,$00003658,$52aeff78
-	dc.l	$4cfb3fff,$01700000,$36543d7c,$2040ff60
-	dc.l	$227c0000,$00103d7c,$0001ff7c,$44fc0000
-	dc.l	$48ee7fff,$ff8000ee,$9000ff60,$42eeff7e
-	dc.l	$48ee7fff,$ffc061ff,$000035ea,$4a0066ff
-	dc.l	$00003610,$52aeff78,$4cfb3fff,$01700000
-	dc.l	$360c3d7c,$2040ff60,$223c1111,$11503d7c
-	dc.l	$0001ff7c,$44fc0000,$48ee7fff,$ff8000ee
-	dc.l	$1000ff60,$42eeff7e,$48ee7fff,$ffc061ff
-	dc.l	$000035a2,$4a0066ff,$000035c8,$52aeff78
-	dc.l	$4cfb3fff,$01700000,$35c43d7c,$2040ff60
-	dc.l	$227c0000,$00903d7c,$0001ff7c,$44fc0000
-	dc.l	$48ee7fff,$ff8000ee,$9000ff60,$42eeff7e
-	dc.l	$48ee7fff,$ffc061ff,$0000355a,$4a0066ff
-	dc.l	$00003580,$52aeff78,$4cfb3fff,$01700000
-	dc.l	$357c2d7c,$2000a000,$ff60223c,$11112000
-	dc.l	$3d7c0004,$ff7c44fc,$000048ee,$7fffff80
-	dc.l	$02ee1000,$ff6042ee,$ff7e48ee,$7fffffc0
-	dc.l	$61ff0000,$35104a00,$66ff0000,$353652ae
-	dc.l	$ff784cfb,$3fff0170,$00003532,$2d7c2000
-	dc.l	$a000ff60,$227cffff,$a0003d7c,$0004ff7c
-	dc.l	$44fc0000,$48ee7fff,$ff8002ee,$9000ff60
-	dc.l	$42eeff7e,$48ee7fff,$ffc061ff,$000034c6
-	dc.l	$4a0066ff,$000034ec,$52aeff78,$4cfb3fff
-	dc.l	$01700000,$34e82d7c,$2000a000,$ff60223c
-	dc.l	$11113000,$3d7c0000,$ff7c44fc,$000048ee
-	dc.l	$7fffff80,$02ee1800,$ff6042ee,$ff7e48ee
-	dc.l	$7fffffc0,$61ff0000,$347c4a00,$66ff0000
-	dc.l	$34a252ae,$ff784cfb,$3fff0170,$0000349e
-	dc.l	$2d7c2000,$a000ff60,$227cffff,$90003d7c
-	dc.l	$0000ff7c,$44fc0000,$48ee7fff,$ff8002ee
-	dc.l	$9000ff60,$42eeff7e,$48ee7fff,$ffc061ff
-	dc.l	$00003432,$4a0066ff,$00003458,$52aeff78
-	dc.l	$4cfb3fff,$01700000,$34542d7c,$2000a000
-	dc.l	$ff60223c,$11111000,$3d7c0001,$ff7c44fc
-	dc.l	$000048ee,$7fffff80,$02ee1000,$ff6042ee
-	dc.l	$ff7e48ee,$7fffffc0,$61ff0000,$33e84a00
-	dc.l	$66ff0000,$340e52ae,$ff784cfb,$3fff0170
-	dc.l	$0000340a,$2d7c2000,$a000ff60,$227cffff
-	dc.l	$b0003d7c,$0001ff7c,$44fc0000,$48ee7fff
-	dc.l	$ff8002ee,$9000ff60,$42eeff7e,$48ee7fff
-	dc.l	$ffc061ff,$0000339e,$4a0066ff,$000033c4
-	dc.l	$52aeff78,$4cfb3fff,$01700000,$33c02d7c
-	dc.l	$a0000000,$ff602d7c,$c0000000,$ff64223c
-	dc.l	$a0000000,$3d7c000c,$ff7c44fc,$000848ee
-	dc.l	$7fffff80,$04ee1000,$ff6042ee,$ff7e48ee
-	dc.l	$7fffffc0,$61ff0000,$334c4a00,$66ff0000
-	dc.l	$337252ae,$ff784cfb,$3fff0170,$0000336e
-	dc.l	$2d7ca000,$0000ff60,$2d7cc000,$0000ff64
-	dc.l	$227cc000,$00003d7c,$000cff7c,$44fc0008
-	dc.l	$48ee7fff,$ff8004ee,$9000ff60,$42eeff7e
-	dc.l	$48ee7fff,$ffc061ff,$000032fa,$4a0066ff
-	dc.l	$00003320,$52aeff78,$4cfb3fff,$01700000
-	dc.l	$331c2d7c,$a0000000,$ff602d7c,$c0000000
-	dc.l	$ff64223c,$b0000000,$3d7c0008,$ff7c44fc
-	dc.l	$000848ee,$7fffff80,$04ee1800,$ff6042ee
-	dc.l	$ff7e48ee,$7fffffc0,$61ff0000,$32a84a00
-	dc.l	$66ff0000,$32ce52ae,$ff784cfb,$3fff0170
-	dc.l	$000032ca,$2d7ca000,$0000ff60,$2d7cc000
-	dc.l	$0000ff64,$227c1000,$00003d7c,$0009ff7c
-	dc.l	$44fc0008,$48ee7fff,$ff8004ee,$9000ff60
-	dc.l	$42eeff7e,$48ee7fff,$ffc061ff,$00003256
-	dc.l	$4a0066ff,$0000327c,$52aeff78,$4cfb3fff
-	dc.l	$01700000,$32782d7c,$a0000000,$ff602d7c
-	dc.l	$c0000000,$ff64223c,$90000000,$3d7c0009
-	dc.l	$ff7c44fc,$000848ee,$7fffff80,$04ee1000
-	dc.l	$ff6042ee,$ff7e48ee,$7fffffc0,$61ff0000
-	dc.l	$32044a00,$66ff0000,$322a52ae,$ff784cfb
-	dc.l	$3fff0170,$00003226,$2d7ca000,$0000ff60
-	dc.l	$2d7cc000,$0000ff64,$227cd000,$00003d7c
-	dc.l	$0009ff7c,$44fc0008,$48ee7fff,$ff8004ee
-	dc.l	$9000ff60,$42eeff7e,$48ee7fff,$ffc061ff
-	dc.l	$000031b2,$4a0066ff,$000031d8,$52aeff78
-	dc.l	$4cfb3fff,$01700000,$31d43d7c,$a040ff60
-	dc.l	$223c1111,$11a03d7c,$0004ff7c,$44fc0000
-	dc.l	$48ee7fff,$ff8000ee,$1000ff60,$42eeff7e
-	dc.l	$48ee7fff,$ffc061ff,$0000316a,$4a0066ff
-	dc.l	$00003190,$52aeff78,$4cfb3fff,$01700000
-	dc.l	$318c3d7c,$a040ff60,$227c0000,$00403d7c
-	dc.l	$0004ff7c,$44fc0000,$48ee7fff,$ff8000ee
-	dc.l	$9800ff60,$42eeff7e,$48ee7fff,$ffc061ff
-	dc.l	$00003122,$4a0066ff,$00003148,$52aeff78
-	dc.l	$4cfb3fff,$01700000,$31443d7c,$a040ff60
-	dc.l	$223c1111,$11b03d7c,$0000ff7c,$44fc0000
-	dc.l	$48ee7fff,$ff8000ee,$1000ff60,$42eeff7e
-	dc.l	$48ee7fff,$ffc061ff,$000030da,$4a0066ff
-	dc.l	$00003100,$52aeff78,$4cfb3fff,$01700000
-	dc.l	$30fc3d7c,$a040ff60,$227c0000,$00103d7c
-	dc.l	$0000ff7c,$44fc0000,$48ee7fff,$ff8000ee
-	dc.l	$9000ff60,$42eeff7e,$48ee7fff,$ffc061ff
-	dc.l	$00003092,$4a0066ff,$000030b8,$52aeff78
-	dc.l	$4cfb3fff,$01700000,$30b43d7c,$a040ff60
-	dc.l	$223c1111,$11903d7c,$0001ff7c,$44fc0000
-	dc.l	$48ee7fff,$ff8000ee,$1000ff60,$42eeff7e
-	dc.l	$48ee7fff,$ffc061ff,$0000304a,$4a0066ff
-	dc.l	$00003070,$52aeff78,$4cfb3fff,$01700000
-	dc.l	$306c3d7c,$a040ff60,$227c0000,$00503d7c
-	dc.l	$0001ff7c,$44fc0000,$48ee7fff,$ff8000ee
-	dc.l	$9000ff60,$42eeff7e,$48ee7fff,$ffc061ff
-	dc.l	$00003002,$4a0066ff,$00003028,$52aeff78
-	dc.l	$4cfb3fff,$01700000,$30243d7c,$a0c0ff60
-	dc.l	$223c1111,$11a03d7c,$0004ff7c,$44fc0000
-	dc.l	$48ee7fff,$ff8000ee,$1000ff60,$42eeff7e
-	dc.l	$48ee7fff,$ffc061ff,$00002fba,$4a0066ff
-	dc.l	$00002fe0,$52aeff78,$4cfb3fff,$01700000
-	dc.l	$2fdc3d7c,$a0c0ff60,$227cffff,$ffc03d7c
-	dc.l	$0004ff7c,$44fc0000,$48ee7fff,$ff8000ee
-	dc.l	$9000ff60,$42eeff7e,$48ee7fff,$ffc061ff
-	dc.l	$00002f72,$4a0066ff,$00002f98,$52aeff78
-	dc.l	$4cfb3fff,$01700000,$2f943d7c,$a0c0ff60
-	dc.l	$223c1111,$11b03d7c,$0000ff7c,$44fc0000
-	dc.l	$48ee7fff,$ff8000ee,$1800ff60,$42eeff7e
-	dc.l	$48ee7fff,$ffc061ff,$00002f2a,$4a0066ff
-	dc.l	$00002f50,$52aeff78,$4cfb3fff,$01700000
-	dc.l	$2f4c3d7c,$a0c0ff60,$227c1111,$11903d7c
-	dc.l	$0001ff7c,$44fc0000,$48ee7fff,$ff8000ee
-	dc.l	$9000ff60,$42eeff7e,$48ee7fff,$ffc061ff
-	dc.l	$00002ee2,$4a0066ff,$00002f08,$52aeff78
-	dc.l	$4cfb3fff,$01700000,$2f043d7c,$a0c0ff60
-	dc.l	$223c1111,$11d03d7c,$0001ff7c,$44fc0000
-	dc.l	$48ee7fff,$ff8000ee,$1000ff60,$42eeff7e
-	dc.l	$48ee7fff,$ffc061ff,$00002e9a,$4a0066ff
-	dc.l	$00002ec0,$52aeff78,$4cfb3fff,$01700000
-	dc.l	$2ebc3d7c,$a0c0ff60,$227c0000,$00503d7c
-	dc.l	$001bff7c,$44fc001f,$48ee7fff,$ff8000ee
-	dc.l	$9000ff60,$42eeff7e,$48ee7fff,$ffc061ff
-	dc.l	$00002e52,$4a0066ff,$00002e78,$222eff78
-	dc.l	$42804e75,$09456666,$65637469,$76652061
-	dc.l	$64647265,$73736573,$2e2e2e00,$52aeff78
-	dc.l	$4cfb3fff,$01700000,$2e544282,$760241ee
-	dc.l	$ff743d7c,$0000ff7c,$44fc0000,$48eeffff
-	dc.l	$ff804c10,$340242ee,$ff7e48ee,$ffffffc0
-	dc.l	$2d7c0000,$0004ff8c,$61ff0000,$2de84a00
-	dc.l	$66ff0000,$2e0e52ae,$ff784cfb,$3fff0170
-	dc.l	$00002e0a,$42827602,$41eeff74,$3d7c0000
-	dc.l	$ff7c44fc,$000048ee,$ffffff80,$4c183402
-	dc.l	$42eeff7e,$48eeffff,$ffc02d7c,$00000004
-	dc.l	$ff8c41ee,$ff782d48,$ffa061ff,$00002d96
-	dc.l	$4a0066ff,$00002dbc,$52aeff78,$4cfb3fff
-	dc.l	$01700000,$2db84282,$760241ee,$ff783d7c
-	dc.l	$0000ff7c,$44fc0000,$48eeffff,$ff804c20
-	dc.l	$340242ee,$ff7e48ee,$ffffffc0,$2d7c0000
-	dc.l	$0004ff8c,$41eeff74,$2d48ffa0,$61ff0000
-	dc.l	$2d444a00,$66ff0000,$2d6a52ae,$ff784cfb
-	dc.l	$3fff0170,$00002d66,$42827602,$41ee0f74
-	dc.l	$3d7c0000,$ff7c44fc,$000048ee,$ffffff80
-	dc.l	$4c283402,$f00042ee,$ff7e48ee,$ffffffc0
-	dc.l	$2d7c0000,$0004ff8c,$61ff0000,$2cf84a00
-	dc.l	$66ff0000,$2d1e52ae,$ff784cfb,$3fff0170
-	dc.l	$00002d1a,$42827602,$41eeef74,$3d7c0000
-	dc.l	$ff7c44fc,$000048ee,$ffffff80,$4c283402
-	dc.l	$100042ee,$ff7e48ee,$ffffffc0,$2d7c0000
-	dc.l	$0004ff8c,$61ff0000,$2cac4a00,$66ff0000
-	dc.l	$2cd252ae,$ff7852ae,$ff7852ae,$ff784cfb
-	dc.l	$3fff0170,$00002cc6,$42827602,$3d7c0000
-	dc.l	$ff7c44fc,$000048ee,$ffffff80,$4c3c3402
-	dc.l	$00000002,$42eeff7e,$48eeffff,$ffc02d7c
-	dc.l	$00000004,$ff8c61ff,$00002c5a,$4a0066ff
-	dc.l	$00002c80,$52aeff78,$60040000,$00024cfb
-	dc.l	$3fff0170,$00002c76,$42827602,$3d7c0000
-	dc.l	$ff7c44fc,$000048ee,$ffffff80,$4c3a3402
-	dc.l	$ffda42ee,$ff7e48ee,$ffffffc0,$2d7c0000
-	dc.l	$0004ff8c,$61ff0000,$2c0c4a00,$66ff0000
-	dc.l	$2c3252ae,$ff784cfb,$3fff0170,$00002c2e
-	dc.l	$42827602,$43eeff78,$3d7c0000,$ff7c44fc
-	dc.l	$000048ee,$ffffff80,$4c213402,$42eeff7e
-	dc.l	$48eeffff,$ffc02d7c,$00000004,$ff8c41ee
-	dc.l	$ff742d48,$ffa461ff,$00002bba,$4a0066ff
-	dc.l	$00002be0,$52aeff78,$4cfb3fff,$01700000
-	dc.l	$2bdc4282,$760245ee,$ff783d7c,$0000ff7c
-	dc.l	$44fc0000,$48eeffff,$ff804c22,$340242ee
-	dc.l	$ff7e48ee,$ffffffc0,$2d7c0000,$0004ff8c
-	dc.l	$41eeff74,$2d48ffa8,$61ff0000,$2b684a00
-	dc.l	$66ff0000,$2b8e52ae,$ff784cfb,$3fff0170
-	dc.l	$00002b8a,$42827602,$47eeff78,$3d7c0000
-	dc.l	$ff7c44fc,$000048ee,$ffffff80,$4c233402
-	dc.l	$42eeff7e,$48eeffff,$ffc02d7c,$00000004
-	dc.l	$ff8c41ee,$ff742d48,$ffac61ff,$00002b16
-	dc.l	$4a0066ff,$00002b3c,$52aeff78,$4cfb3fff
-	dc.l	$01700000,$2b384282,$760249ee,$ff783d7c
-	dc.l	$0000ff7c,$44fc0000,$48eeffff,$ff804c24
-	dc.l	$340242ee,$ff7e48ee,$ffffffc0,$2d7c0000
-	dc.l	$0004ff8c,$41eeff74,$2d48ffb0,$61ff0000
-	dc.l	$2ac44a00,$66ff0000,$2aea52ae,$ff784cfb
-	dc.l	$3fff0170,$00002ae6,$42827602,$4beeff78
-	dc.l	$3d7c0000,$ff7c44fc,$000048ee,$ffffff80
-	dc.l	$4c253402,$42eeff7e,$48eeffff,$ffc02d7c
-	dc.l	$00000004,$ff8c41ee,$ff742d48,$ffb461ff
-	dc.l	$00002a72,$4a0066ff,$00002a98,$52aeff78
-	dc.l	$4cfb3fff,$01700000,$2a94224e,$42827602
-	dc.l	$4de9ff78,$337c0000,$ff7c44fc,$000048e9
-	dc.l	$ffffff80,$4c263402,$42e9ff7e,$48e9ffff
-	dc.l	$ffc0237c,$00000004,$ff8c41e9,$ff742348
-	dc.l	$ffb82c49,$61ff0000,$2a1c4a00,$66ff0000
-	dc.l	$2a4252ae,$ff784cfb,$3fff0170,$00002a3e
-	dc.l	$42827602,$204f4fee,$ff783d7c,$0000ff7c
-	dc.l	$44fc0000,$48eeffff,$ff804c27,$340242ee
-	dc.l	$ff7e48ee,$ffffffc0,$2d7c0000,$0004ff8c
-	dc.l	$43eeff74,$2d49ffbc,$2e4861ff,$000029c6
-	dc.l	$4a0066ff,$000029ec,$52aeff78,$4cfb3fff
-	dc.l	$01700000,$29e84282,$760241ee,$ff7478f0
-	dc.l	$3d7c0000,$ff7c44fc,$000048ee,$ffffff80
-	dc.l	$4c303402,$401042ee,$ff7e48ee,$ffffffc0
-	dc.l	$2d7c0000,$0004ff8c,$61ff0000,$29784a00
-	dc.l	$66ff0000,$299e52ae,$ff784cfb,$3fff0170
-	dc.l	$0000299a,$42827602,$41eeff74,$78f83d7c
-	dc.l	$0000ff7c,$44fc0000,$48eeffff,$ff804c30
-	dc.l	$34024210,$42eeff7e,$48eeffff,$ffc02d7c
-	dc.l	$00000004,$ff8c61ff,$0000292a,$4a0066ff
-	dc.l	$00002950,$52aeff78,$4cfb3fff,$01700000
-	dc.l	$294c4282,$760241ee,$ff7478fc,$3d7c0000
-	dc.l	$ff7c44fc,$000048ee,$ffffff80,$4c303402
-	dc.l	$441042ee,$ff7e48ee,$ffffffc0,$2d7c0000
-	dc.l	$0004ff8c,$61ff0000,$28dc4a00,$66ff0000
-	dc.l	$290252ae,$ff784cfb,$3fff0170,$000028fe
-	dc.l	$42827602,$41eeff74,$78fe3d7c,$0000ff7c
-	dc.l	$44fc0000,$48eeffff,$ff804c30,$34024610
-	dc.l	$42eeff7e,$48eeffff,$ffc02d7c,$00000004
-	dc.l	$ff8c61ff,$0000288e,$4a0066ff,$000028b4
-	dc.l	$52aeff78,$4cfb3fff,$01700000,$28b04282
-	dc.l	$760241ee,$ff7478f0,$3d7c0000,$ff7c44fc
-	dc.l	$000048ee,$ffffff80,$4c303402,$481042ee
-	dc.l	$ff7e48ee,$ffffffc0,$2d7c0000,$0004ff8c
-	dc.l	$61ff0000,$28404a00,$66ff0000,$286652ae
-	dc.l	$ff784cfb,$3fff0170,$00002862,$42827602
-	dc.l	$41eeff74,$78f83d7c,$0000ff7c,$44fc0000
-	dc.l	$48eeffff,$ff804c30,$34024a10,$42eeff7e
-	dc.l	$48eeffff,$ffc02d7c,$00000004,$ff8c61ff
-	dc.l	$000027f2,$4a0066ff,$00002818,$52aeff78
-	dc.l	$4cfb3fff,$01700000,$28144282,$760241ee
-	dc.l	$ff7478fc,$3d7c0000,$ff7c44fc,$000048ee
-	dc.l	$ffffff80,$4c303402,$4c1042ee,$ff7e48ee
-	dc.l	$ffffffc0,$2d7c0000,$0004ff8c,$61ff0000
-	dc.l	$27a44a00,$66ff0000,$27ca52ae,$ff784cfb
-	dc.l	$3fff0170,$000027c6,$42827602,$41eeff74
-	dc.l	$78fe3d7c,$0000ff7c,$44fc0000,$48eeffff
-	dc.l	$ff804c30,$34024e10,$42eeff7e,$48eeffff
-	dc.l	$ffc02d7c,$00000004,$ff8c61ff,$00002756
-	dc.l	$4a0066ff,$0000277c,$52aeff78,$4cfb3fff
-	dc.l	$01700000,$27784282,$760241ee,$ff74287c
-	dc.l	$fffffffe,$3d7c0000,$ff7c44fc,$000048ee
-	dc.l	$ffffff80,$4c303402,$ce1042ee,$ff7e48ee
-	dc.l	$ffffffc0,$2d7c0000,$0004ff8c,$61ff0000
-	dc.l	$27044a00,$66ff0000,$272a52ae,$ff784cfb
-	dc.l	$3fff0170,$00002726,$42827602,$41eeff74
-	dc.l	$287c0000,$00023d7c,$0000ff7c,$44fc0000
-	dc.l	$48eeffff,$ff804c30,$3402cef0,$42eeff7e
-	dc.l	$48eeffff,$ffc02d7c,$00000004,$ff8c61ff
-	dc.l	$000026b2,$4a0066ff,$000026d8,$52aeff78
-	dc.l	$4cfb3fff,$01700000,$26d44282,$760243ee
-	dc.l	$ff7478f0,$3d7c0000,$ff7c44fc,$000048ee
-	dc.l	$ffffff80,$4c313402,$401042ee,$ff7e48ee
-	dc.l	$ffffffc0,$2d7c0000,$0004ff8c,$61ff0000
-	dc.l	$26644a00,$66ff0000,$268a52ae,$ff784cfb
-	dc.l	$3fff0170,$00002686,$42827602,$45eeff74
-	dc.l	$78f03d7c,$0000ff7c,$44fc0000,$48eeffff
-	dc.l	$ff804c32,$34024010,$42eeff7e,$48eeffff
-	dc.l	$ffc02d7c,$00000004,$ff8c61ff,$00002616
-	dc.l	$4a0066ff,$0000263c,$52aeff78,$4cfb3fff
-	dc.l	$01700000,$26384282,$760247ee,$ff7478f0
-	dc.l	$3d7c0000,$ff7c44fc,$000048ee,$ffffff80
-	dc.l	$4c333402,$401042ee,$ff7e48ee,$ffffffc0
-	dc.l	$2d7c0000,$0004ff8c,$61ff0000,$25c84a00
-	dc.l	$66ff0000,$25ee52ae,$ff784cfb,$3fff0170
-	dc.l	$000025ea,$42827602,$49eeff74,$78f03d7c
-	dc.l	$0000ff7c,$44fc0000,$48eeffff,$ff804c34
-	dc.l	$34024010,$42eeff7e,$48eeffff,$ffc02d7c
-	dc.l	$00000004,$ff8c61ff,$0000257a,$4a0066ff
-	dc.l	$000025a0,$52aeff78,$4cfb3fff,$01700000
-	dc.l	$259c4282,$76024bee,$ff7478f0,$3d7c0000
-	dc.l	$ff7c44fc,$000048ee,$ffffff80,$4c353402
-	dc.l	$401042ee,$ff7e48ee,$ffffffc0,$2d7c0000
-	dc.l	$0004ff8c,$61ff0000,$252c4a00,$66ff0000
-	dc.l	$255252ae,$ff784cfb,$3fff0170,$0000254e
-	dc.l	$224e4282,$76024de9,$ff7478f0,$337c0000
-	dc.l	$ff7c44fc,$000048e9,$ffffff80,$4c363402
-	dc.l	$401042e9,$ff7e48e9,$ffffffc0,$237c0000
-	dc.l	$0004ff8c,$2c4961ff,$000024da,$4a0066ff
-	dc.l	$00002500,$52aeff78,$4cfb3fff,$01700000
-	dc.l	$24fc4282,$7602204f,$4feeff74,$78f03d7c
-	dc.l	$0000ff7c,$44fc0000,$48eeffff,$ff804c37
-	dc.l	$34024010,$42eeff7e,$48eeffff,$ffc02d7c
-	dc.l	$00000004,$ff8c2e48,$61ff0000,$24884a00
-	dc.l	$66ff0000,$24ae52ae,$ff784cfb,$3fff0170
-	dc.l	$000024aa,$42827602,$43eeff74,$3d7c0000
-	dc.l	$ff7c44fc,$000048ee,$ffffff80,$4c113402
-	dc.l	$42eeff7e,$48eeffff,$ffc02d7c,$00000004
-	dc.l	$ff8c61ff,$0000243e,$4a0066ff,$00002464
-	dc.l	$52aeff78,$4cfb3fff,$01700000,$24604282
-	dc.l	$760245ee,$ff743d7c,$0000ff7c,$44fc0000
-	dc.l	$48eeffff,$ff804c12,$340242ee,$ff7e48ee
-	dc.l	$ffffffc0,$2d7c0000,$0004ff8c,$61ff0000
-	dc.l	$23f44a00,$66ff0000,$241a52ae,$ff784cfb
-	dc.l	$3fff0170,$00002416,$42827602,$47eeff74
-	dc.l	$3d7c0000,$ff7c44fc,$000048ee,$ffffff80
-	dc.l	$4c133402,$42eeff7e,$48eeffff,$ffc02d7c
-	dc.l	$00000004,$ff8c61ff,$000023aa,$4a0066ff
-	dc.l	$000023d0,$52aeff78,$4cfb3fff,$01700000
-	dc.l	$23cc4282,$760249ee,$ff743d7c,$0000ff7c
-	dc.l	$44fc0000,$48eeffff,$ff804c14,$340242ee
-	dc.l	$ff7e48ee,$ffffffc0,$2d7c0000,$0004ff8c
-	dc.l	$61ff0000,$23604a00,$66ff0000,$238652ae
-	dc.l	$ff784cfb,$3fff0170,$00002382,$42827602
-	dc.l	$4beeff74,$3d7c0000,$ff7c44fc,$000048ee
-	dc.l	$ffffff80,$4c153402,$42eeff7e,$48eeffff
-	dc.l	$ffc02d7c,$00000004,$ff8c61ff,$00002316
-	dc.l	$4a0066ff,$0000233c,$52aeff78,$4cfb3fff
-	dc.l	$01700000,$2338224e,$42827602,$4de9ff74
-	dc.l	$337c0000,$ff7c44fc,$000048e9,$ffffff80
-	dc.l	$4c163402,$42e9ff7e,$48e9ffff,$ffc0237c
-	dc.l	$00000004,$ff8c2c49,$61ff0000,$22c84a00
-	dc.l	$66ff0000,$22ee52ae,$ff784cfb,$3fff0170
-	dc.l	$000022ea,$42827602,$204f4fee,$ff743d7c
-	dc.l	$0000ff7c,$44fc0000,$48eeffff,$ff804c17
-	dc.l	$340242ee,$ff7e48ee,$ffffffc0,$2d7c0000
-	dc.l	$0004ff8c,$2e4861ff,$0000227a,$4a0066ff
-	dc.l	$000022a0,$52aeff78,$4cfb3fff,$01700000
-	dc.l	$229c4282,$760243ee,$ff743d7c,$0000ff7c
-	dc.l	$44fc0000,$48eeffff,$ff804c19,$340242ee
-	dc.l	$ff7e48ee,$ffffffc0,$2d7c0000,$0004ff8c
-	dc.l	$41eeff78,$2d48ffa4,$61ff0000,$22284a00
-	dc.l	$66ff0000,$224e52ae,$ff784cfb,$3fff0170
-	dc.l	$0000224a,$42827602,$45eeff74,$3d7c0000
-	dc.l	$ff7c44fc,$000048ee,$ffffff80,$4c1a3402
-	dc.l	$42eeff7e,$48eeffff,$ffc02d7c,$00000004
-	dc.l	$ff8c41ee,$ff782d48,$ffa861ff,$000021d6
-	dc.l	$4a0066ff,$000021fc,$52aeff78,$4cfb3fff
-	dc.l	$01700000,$21f84282,$760247ee,$ff743d7c
-	dc.l	$0000ff7c,$44fc0000,$48eeffff,$ff804c1b
-	dc.l	$340242ee,$ff7e48ee,$ffffffc0,$2d7c0000
-	dc.l	$0004ff8c,$41eeff78,$2d48ffac,$61ff0000
-	dc.l	$21844a00,$66ff0000,$21aa52ae,$ff784cfb
-	dc.l	$3fff0170,$000021a6,$42827602,$49eeff74
-	dc.l	$3d7c0000,$ff7c44fc,$000048ee,$ffffff80
-	dc.l	$4c1c3402,$42eeff7e,$48eeffff,$ffc02d7c
-	dc.l	$00000004,$ff8c41ee,$ff782d48,$ffb061ff
-	dc.l	$00002132,$4a0066ff,$00002158,$52aeff78
-	dc.l	$4cfb3fff,$01700000,$21544282,$76024bee
-	dc.l	$ff743d7c,$0000ff7c,$44fc0000,$48eeffff
-	dc.l	$ff804c1d,$340242ee,$ff7e48ee,$ffffffc0
-	dc.l	$2d7c0000,$0004ff8c,$41eeff78,$2d48ffb4
-	dc.l	$61ff0000,$20e04a00,$66ff0000,$210652ae
-	dc.l	$ff784cfb,$3fff0170,$00002102,$224e4282
-	dc.l	$76024de9,$ff74337c,$0000ff7c,$44fc0000
-	dc.l	$48e9ffff,$ff804c1e,$340242e9,$ff7e48e9
-	dc.l	$ffffffc0,$237c0000,$0004ff8c,$41e9ff78
-	dc.l	$2348ffb8,$2c4961ff,$0000208a,$4a0066ff
-	dc.l	$000020b0,$52aeff78,$4cfb3fff,$01700000
-	dc.l	$20ac4282,$7602204f,$4feeff74,$3d7c0000
-	dc.l	$ff7c44fc,$000048ee,$ffffff80,$4c1f3402
-	dc.l	$42eeff7e,$48eeffff,$ffc02d7c,$00000004
-	dc.l	$ff8c43ee,$ff782d49,$ffbc2e48,$61ff0000
-	dc.l	$20344a00,$66ff0000,$205a52ae,$ff784cfb
-	dc.l	$3fff0170,$00002056,$42827602,$43eeef74
-	dc.l	$3d7c0000,$ff7c44fc,$000048ee,$ffffff80
-	dc.l	$4c293402,$100042ee,$ff7e48ee,$ffffffc0
-	dc.l	$2d7c0000,$0004ff8c,$61ff0000,$1fe84a00
-	dc.l	$66ff0000,$200e52ae,$ff784cfb,$3fff0170
-	dc.l	$0000200a,$42827602,$45eeef74,$3d7c0000
-	dc.l	$ff7c44fc,$000048ee,$ffffff80,$4c2a3402
-	dc.l	$100042ee,$ff7e48ee,$ffffffc0,$2d7c0000
-	dc.l	$0004ff8c,$61ff0000,$1f9c4a00,$66ff0000
-	dc.l	$1fc252ae,$ff784cfb,$3fff0170,$00001fbe
-	dc.l	$42827602,$47eeef74,$3d7c0000,$ff7c44fc
-	dc.l	$000048ee,$ffffff80,$4c2b3402,$100042ee
-	dc.l	$ff7e48ee,$ffffffc0,$2d7c0000,$0004ff8c
-	dc.l	$61ff0000,$1f504a00,$66ff0000,$1f7652ae
-	dc.l	$ff784cfb,$3fff0170,$00001f72,$42827602
-	dc.l	$49eeef74,$3d7c0000,$ff7c44fc,$000048ee
-	dc.l	$ffffff80,$4c2c3402,$100042ee,$ff7e48ee
-	dc.l	$ffffffc0,$2d7c0000,$0004ff8c,$61ff0000
-	dc.l	$1f044a00,$66ff0000,$1f2a52ae,$ff784cfb
-	dc.l	$3fff0170,$00001f26,$42827602,$4beeef74
-	dc.l	$3d7c0000,$ff7c44fc,$000048ee,$ffffff80
-	dc.l	$4c2d3402,$100042ee,$ff7e48ee,$ffffffc0
-	dc.l	$2d7c0000,$0004ff8c,$61ff0000,$1eb84a00
-	dc.l	$66ff0000,$1ede52ae,$ff784cfb,$3fff0170
-	dc.l	$00001eda,$224e4282,$76024de9,$ef74337c
-	dc.l	$0000ff7c,$44fc0000,$48e9ffff,$ff804c2e
-	dc.l	$34021000,$42e9ff7e,$48e9ffff,$ffc0237c
-	dc.l	$00000004,$ff8c2c49,$61ff0000,$1e684a00
-	dc.l	$66ff0000,$1e8e52ae,$ff784cfb,$3fff0170
-	dc.l	$00001e8a,$42827602,$204f4fee,$ef743d7c
-	dc.l	$0000ff7c,$44fc0000,$48eeffff,$ff804c2f
-	dc.l	$34021000,$42eeff7e,$48eeffff,$ffc02d7c
-	dc.l	$00000004,$ff8c2e48,$61ff0000,$1e184a00
-	dc.l	$66ff0000,$1e3e52ae,$ff784cfb,$3fff0170
-	dc.l	$00001e3a,$42827602,$41ee0f74,$3d7c0000
-	dc.l	$ff7c44fc,$000048ee,$ffffff80,$4c283402
-	dc.l	$f00042ee,$ff7e48ee,$ffffffc0,$2d7c0000
-	dc.l	$0004ff8c,$61ff0000,$1dcc4a00,$66ff0000
-	dc.l	$1df252ae,$ff786004,$00000002,$4cfb3fff
-	dc.l	$01700000,$1de84282,$76023d7c,$0000ff7c
-	dc.l	$44fc0000,$48eeffff,$ff804c3a,$3402ffda
-	dc.l	$42eeff7e,$48eeffff,$ffc02d7c,$00000004
-	dc.l	$ff8c61ff,$00001d7e,$4a0066ff,$00001da4
-	dc.l	$52aeff78,$4cfb3fff,$01700000,$1da04282
-	dc.l	$760247ee,$ff7478f0,$3d7c0000,$ff7c44fc
-	dc.l	$000048ee,$ffffff80,$4c333402,$401042ee
-	dc.l	$ff7e48ee,$ffffffc0,$2d7c0000,$0004ff8c
-	dc.l	$61ff0000,$1d304a00,$66ff0000,$1d5652ae
-	dc.l	$ff784cfb,$3fff0170,$00001d52,$42827602
-	dc.l	$47eeff74,$78f83d7c,$0000ff7c,$44fc0000
-	dc.l	$48eeffff,$ff804c33,$34024210,$42eeff7e
-	dc.l	$48eeffff,$ffc02d7c,$00000004,$ff8c61ff
-	dc.l	$00001ce2,$4a0066ff,$00001d08,$52aeff78
-	dc.l	$4cfb3fff,$01700000,$1d044282,$760247ee
-	dc.l	$ff7478fc,$3d7c0000,$ff7c44fc,$000048ee
-	dc.l	$ffffff80,$4c333402,$441042ee,$ff7e48ee
-	dc.l	$ffffffc0,$2d7c0000,$0004ff8c,$61ff0000
-	dc.l	$1c944a00,$66ff0000,$1cba52ae,$ff784cfb
-	dc.l	$3fff0170,$00001cb6,$42827602,$47eeff74
-	dc.l	$78fe3d7c,$0000ff7c,$44fc0000,$48eeffff
-	dc.l	$ff804c33,$34024610,$42eeff7e,$48eeffff
-	dc.l	$ffc02d7c,$00000004,$ff8c61ff,$00001c46
-	dc.l	$4a0066ff,$00001c6c,$52aeff78,$4cfb3fff
-	dc.l	$01700000,$1c684282,$760247ee,$ff7478f0
-	dc.l	$3d7c0000,$ff7c44fc,$000048ee,$ffffff80
-	dc.l	$4c333402,$481042ee,$ff7e48ee,$ffffffc0
-	dc.l	$2d7c0000,$0004ff8c,$61ff0000,$1bf84a00
-	dc.l	$66ff0000,$1c1e52ae,$ff784cfb,$3fff0170
-	dc.l	$00001c1a,$42827602,$47eeff74,$78f83d7c
-	dc.l	$0000ff7c,$44fc0000,$48eeffff,$ff804c33
-	dc.l	$34024a10,$42eeff7e,$48eeffff,$ffc02d7c
-	dc.l	$00000004,$ff8c61ff,$00001baa,$4a0066ff
-	dc.l	$00001bd0,$52aeff78,$4cfb3fff,$01700000
-	dc.l	$1bcc4282,$760247ee,$ff7478fc,$3d7c0000
-	dc.l	$ff7c44fc,$000048ee,$ffffff80,$4c333402
-	dc.l	$4c1042ee,$ff7e48ee,$ffffffc0,$2d7c0000
-	dc.l	$0004ff8c,$61ff0000,$1b5c4a00,$66ff0000
-	dc.l	$1b8252ae,$ff784cfb,$3fff0170,$00001b7e
-	dc.l	$42827602,$47eeff74,$78fe3d7c,$0000ff7c
-	dc.l	$44fc0000,$48eeffff,$ff804c33,$34024e10
-	dc.l	$42eeff7e,$48eeffff,$ffc02d7c,$00000004
-	dc.l	$ff8c61ff,$00001b0e,$4a0066ff,$00001b34
-	dc.l	$52aeff78,$4cfb3fff,$01700000,$1b304282
-	dc.l	$760247ee,$ff74287c,$00000002,$3d7c0000
-	dc.l	$ff7c44fc,$000048ee,$ffffff80,$4c333402
-	dc.l	$cef042ee,$ff7e48ee,$ffffffc0,$2d7c0000
-	dc.l	$0004ff8c,$61ff0000,$1abc4a00,$66ff0000
-	dc.l	$1ae252ae,$ff784cfb,$3fff0170,$00001ade
-	dc.l	$42827602,$47eeff74,$287c0000,$00023d7c
-	dc.l	$0000ff7c,$44fc0000,$48eeffff,$ff804c33
-	dc.l	$34020750,$42eeff7e,$48eeffff,$ffc02d7c
-	dc.l	$00000004,$ff8c61ff,$00001a6a,$4a0066ff
-	dc.l	$00001a90,$52aeff78,$4cfb3fff,$01700000
-	dc.l	$1a8c4282,$760247ee,$ff74284b,$d9fc0000
-	dc.l	$00103d7c,$0000ff7c,$44fc0000,$48eeffff
-	dc.l	$ff804c30,$3402c9a0,$fff042ee,$ff7e48ee
-	dc.l	$ffffffc0,$2d7c0000,$0004ff8c,$61ff0000
-	dc.l	$1a144a00,$66ff0000,$1a3a52ae,$ff784cfb
-	dc.l	$3fff0170,$00001a36,$42827602,$47eeff74
-	dc.l	$287c0000,$00023d7c,$0000ff7c,$44fc0000
-	dc.l	$48eeffff,$ff804c33,$3402cef0,$42eeff7e
-	dc.l	$48eeffff,$ffc02d7c,$00000004,$ff8c61ff
-	dc.l	$000019c2,$4a0066ff,$000019e8,$52aeff78
-	dc.l	$60040000,$00024cfb,$3fff0170,$000019de
-	dc.l	$42827602,$47eeff74,$78f03d7c,$0000ff7c
-	dc.l	$44fc0000,$48eeffff,$ff804c3b,$340240e4
-	dc.l	$42eeff7e,$48eeffff,$ffc02d7c,$00000004
-	dc.l	$ff8c61ff,$0000196e,$4a0066ff,$00001994
-	dc.l	$52aeff78,$60040000,$00024cfb,$3fff0170
-	dc.l	$0000198a,$42827602,$41eeff74,$78f83d7c
-	dc.l	$0000ff7c,$44fc0000,$48ee7fff,$ff804c3b
-	dc.l	$340242e4,$42eeff7e,$48ee7fff,$ffc02d7c
-	dc.l	$00000004,$ff8c61ff,$0000191a,$4a0066ff
-	dc.l	$00001940,$52aeff78,$60040000,$00024cfb
-	dc.l	$3fff0170,$00001936,$42827602,$41eeff74
-	dc.l	$78fc3d7c,$0000ff7c,$44fc0000,$48ee7fff
-	dc.l	$ff804c3b,$340244e4,$42eeff7e,$48ee7fff
-	dc.l	$ffc02d7c,$00000004,$ff8c61ff,$000018c6
-	dc.l	$4a0066ff,$000018ec,$52aeff78,$60040000
-	dc.l	$00024cfb,$3fff0170,$000018e2,$42827602
-	dc.l	$41eeff74,$78fe3d7c,$0000ff7c,$44fc0000
-	dc.l	$48ee7fff,$ff804c3b,$340246e4,$42eeff7e
-	dc.l	$48ee7fff,$ffc02d7c,$00000004,$ff8c61ff
-	dc.l	$00001872,$4a0066ff,$00001898,$52aeff78
-	dc.l	$60040000,$00024cfb,$3fff0170,$0000188e
-	dc.l	$42827602,$41eeff74,$78f03d7c,$0000ff7c
-	dc.l	$44fc0000,$48ee7fff,$ff804c3b,$340248e4
-	dc.l	$42eeff7e,$48ee7fff,$ffc02d7c,$00000004
-	dc.l	$ff8c61ff,$0000181e,$4a0066ff,$00001844
-	dc.l	$52aeff78,$60040000,$00024cfb,$3fff0170
-	dc.l	$0000183a,$42827602,$41eeff74,$78f83d7c
-	dc.l	$0000ff7c,$44fc0000,$48ee7fff,$ff804c3b
-	dc.l	$34024ae4,$42eeff7e,$48ee7fff,$ffc02d7c
-	dc.l	$00000004,$ff8c61ff,$000017ca,$4a0066ff
-	dc.l	$000017f0,$52aeff78,$60040000,$00024cfb
-	dc.l	$3fff0170,$000017e6,$42827602,$41eeff74
-	dc.l	$78fc3d7c,$0000ff7c,$44fc0000,$48ee7fff
-	dc.l	$ff804c3b,$34024ce4,$42eeff7e,$48ee7fff
-	dc.l	$ffc02d7c,$00000004,$ff8c61ff,$00001776
-	dc.l	$4a0066ff,$0000179c,$52aeff78,$60040000
-	dc.l	$00024cfb,$3fff0170,$00001792,$42827602
-	dc.l	$41eeff74,$78fe3d7c,$0000ff7c,$44fc0000
-	dc.l	$48ee7fff,$ff804c3b,$34024ee4,$42eeff7e
-	dc.l	$48ee7fff,$ffc02d7c,$00000004,$ff8c61ff
-	dc.l	$00001722,$4a0066ff,$00001748,$52aeff78
-	dc.l	$60040000,$00024cfb,$3fff0170,$0000173e
-	dc.l	$42827602,$47eeff74,$287cffff,$fffe3d7c
-	dc.l	$0000ff7c,$44fc0000,$48eeffff,$ff804c3b
-	dc.l	$3402cee0,$42eeff7e,$48eeffff,$ffc02d7c
-	dc.l	$00000004,$ff8c61ff,$000016ca,$4a0066ff
-	dc.l	$000016f0,$52aeff78,$60040000,$00024cfb
-	dc.l	$3fff0170,$000016e6,$42827602,$47eeff74
-	dc.l	$287c0000,$00023d7c,$0000ff7c,$44fc0000
-	dc.l	$48eeffff,$ff804c3b,$34020760,$ffd042ee
-	dc.l	$ff7e48ee,$ffffffc0,$2d7c0000,$0004ff8c
-	dc.l	$61ff0000,$16704a00,$66ff0000,$169652ae
-	dc.l	$ff7852ae,$ff784cfb,$3fff0170,$0000168e
-	dc.l	$42827602,$47f9ffff,$ff74287c,$00000002
-	dc.l	$3d7c0000,$ff7c44fc,$000048ee,$ffffff80
-	dc.l	$4c3b3402,$cf300000,$000a42ee,$ff7e48ee
-	dc.l	$ffffffc0,$2d7c0000,$0004ff8c,$60040000
-	dc.l	$000261ff,$0000160e,$4a0066ff,$00001634
-	dc.l	$52aeff78,$60040000,$00024cfb,$3fff0170
-	dc.l	$0000162a,$42827602,$43eeff74,$78f03d7c
-	dc.l	$0000ff7c,$44fc0000,$48eeffff,$ff804c3b
-	dc.l	$340240e4,$42eeff7e,$48eeffff,$ffc02d7c
-	dc.l	$00000004,$ff8c61ff,$000015ba,$4a0066ff
-	dc.l	$000015e0,$52aeff78,$60040000,$00024cfb
-	dc.l	$3fff0170,$000015d6,$42827602,$41eeff74
-	dc.l	$78f83d7c,$0000ff7c,$44fc0000,$48eeffff
-	dc.l	$ff804c3b,$340242e4,$42eeff7e,$48eeffff
-	dc.l	$ffc02d7c,$00000004,$ff8c61ff,$00001566
-	dc.l	$4a0066ff,$0000158c,$52aeff78,$60040000
-	dc.l	$00024cfb,$3fff0170,$00001582,$42827602
-	dc.l	$41eeff74,$78fc3d7c,$0000ff7c,$44fc0000
-	dc.l	$48eeffff,$ff804c3b,$340244e4,$42eeff7e
-	dc.l	$48eeffff,$ffc02d7c,$00000004,$ff8c61ff
-	dc.l	$00001512,$4a0066ff,$00001538,$52aeff78
-	dc.l	$60040000,$00024cfb,$3fff0170,$0000152e
-	dc.l	$42827602,$41eeff74,$78fe3d7c,$0000ff7c
-	dc.l	$44fc0000,$48eeffff,$ff804c3b,$340246e4
-	dc.l	$42eeff7e,$48eeffff,$ffc02d7c,$00000004
-	dc.l	$ff8c61ff,$000014be,$4a0066ff,$000014e4
-	dc.l	$52aeff78,$60040000,$00024cfb,$3fff0170
-	dc.l	$000014da,$42827602,$41eeff74,$78f03d7c
-	dc.l	$0000ff7c,$44fc0000,$48eeffff,$ff804c3b
-	dc.l	$340248e4,$42eeff7e,$48eeffff,$ffc02d7c
-	dc.l	$00000004,$ff8c61ff,$0000146a,$4a0066ff
-	dc.l	$00001490,$52aeff78,$60040000,$00024cfb
-	dc.l	$3fff0170,$00001486,$42827602,$41eeff74
-	dc.l	$78f83d7c,$0000ff7c,$44fc0000,$48eeffff
-	dc.l	$ff804c3b,$34024ae4,$42eeff7e,$48eeffff
-	dc.l	$ffc02d7c,$00000004,$ff8c61ff,$00001416
-	dc.l	$4a0066ff,$0000143c,$52aeff78,$60040000
-	dc.l	$00024cfb,$3fff0170,$00001432,$42827602
-	dc.l	$41eeff74,$78fc3d7c,$0000ff7c,$44fc0000
-	dc.l	$48eeffff,$ff804c3b,$34024ce4,$42eeff7e
-	dc.l	$48eeffff,$ffc02d7c,$00000004,$ff8c61ff
-	dc.l	$000013c2,$4a0066ff,$000013e8,$52aeff78
-	dc.l	$60040000,$00024cfb,$3fff0170,$000013de
-	dc.l	$42827602,$41eeff74,$78fe3d7c,$0000ff7c
-	dc.l	$44fc0000,$48eeffff,$ff804c3b,$34024ee4
-	dc.l	$42eeff7e,$48eeffff,$ffc02d7c,$00000004
-	dc.l	$ff8c61ff,$0000136e,$4a0066ff,$00001394
-	dc.l	$52aeff78,$4cfb3fff,$01700000,$13904282
-	dc.l	$760241ee,$ff7478fe,$3d7c0000,$ff7c44fc
-	dc.l	$000048ee,$ffffff80,$4c3b3402,$4e2642ee
-	dc.l	$ff7e48ee,$ffffffc0,$2d7c0000,$0004ff8c
-	dc.l	$60040000,$000261ff,$0000131a,$4a0066ff
-	dc.l	$00001340,$52aeff78,$4cfb3fff,$01700000
-	dc.l	$133c4282,$760247ee,$ef7449ee,$ff70288b
-	dc.l	$78f03d7c,$0000ff7c,$44fc0000,$48eeffff
-	dc.l	$ff804c34,$34024122,$00101000,$42eeff7e
-	dc.l	$48eeffff,$ffc02d7c,$00000004,$ff8c61ff
-	dc.l	$000012c2,$4a0066ff,$000012e8,$52aeff78
-	dc.l	$4cfb3fff,$01700000,$12e44282,$760247ee
-	dc.l	$ef7449ee,$ff70288b,$78f83d7c,$0000ff7c
-	dc.l	$44fc0000,$48eeffff,$ff804c34,$34024322
-	dc.l	$00101000,$42eeff7e,$48eeffff,$ffc02d7c
-	dc.l	$00000004,$ff8c61ff,$0000126a,$4a0066ff
-	dc.l	$00001290,$52aeff78,$4cfb3fff,$01700000
-	dc.l	$128c4282,$760247ee,$ef7449ee,$ff70288b
-	dc.l	$78fc3d7c,$0000ff7c,$44fc0000,$48eeffff
-	dc.l	$ff804c34,$34024522,$00101000,$42eeff7e
-	dc.l	$48eeffff,$ffc02d7c,$00000004,$ff8c61ff
-	dc.l	$00001212,$4a0066ff,$00001238,$52aeff78
-	dc.l	$4cfb3fff,$01700000,$12344282,$760247ee
-	dc.l	$ef7449ee,$ff70288b,$78fe3d7c,$0000ff7c
-	dc.l	$44fc0000,$48eeffff,$ff804c34,$34024722
-	dc.l	$00101000,$42eeff7e,$48eeffff,$ffc02d7c
-	dc.l	$00000004,$ff8c61ff,$000011ba,$4a0066ff
-	dc.l	$000011e0,$52aeff78,$4cfb3fff,$01700000
-	dc.l	$11dc4282,$760247ee,$ef7449ee,$ff70288b
-	dc.l	$78f03d7c,$0000ff7c,$44fc0000,$48eeffff
-	dc.l	$ff804c34,$34024922,$00101000,$42eeff7e
-	dc.l	$48eeffff,$ffc02d7c,$00000004,$ff8c61ff
-	dc.l	$00001162,$4a0066ff,$00001188,$52aeff78
-	dc.l	$4cfb3fff,$01700000,$11844282,$760247ee
-	dc.l	$ef7449ee,$ff70288b,$78f83d7c,$0000ff7c
-	dc.l	$44fc0000,$48eeffff,$ff804c34,$34024b22
-	dc.l	$00101000,$42eeff7e,$48eeffff,$ffc02d7c
-	dc.l	$00000004,$ff8c61ff,$0000110a,$4a0066ff
-	dc.l	$00001130,$52aeff78,$4cfb3fff,$01700000
-	dc.l	$112c4282,$760247ee,$ef7449ee,$ff70288b
-	dc.l	$78fc3d7c,$0000ff7c,$44fc0000,$48eeffff
-	dc.l	$ff804c34,$34024d22,$00101000,$42eeff7e
-	dc.l	$48eeffff,$ffc02d7c,$00000004,$ff8c61ff
-	dc.l	$000010b2,$4a0066ff,$000010d8,$52aeff78
-	dc.l	$4cfb3fff,$01700000,$10d44282,$760247ee
-	dc.l	$ef7449ee,$ff70288b,$78fe3d7c,$0000ff7c
-	dc.l	$44fc0000,$48eeffff,$ff804c34,$34024f22
-	dc.l	$00101000,$42eeff7e,$48eeffff,$ffc02d7c
-	dc.l	$00000004,$ff8c61ff,$0000105a,$4a0066ff
-	dc.l	$00001080,$52aeff78,$4cfb3fff,$01700000
-	dc.l	$107c4282,$760247ee,$ef7449ee,$ff70288b
-	dc.l	$78fe3d7c,$0000ff7c,$44fc0000,$48eeffff
-	dc.l	$ff804c34,$34024f33,$00000010,$00001000
-	dc.l	$42eeff7e,$48eeffff,$ffc02d7c,$00000004
-	dc.l	$ff8c61ff,$00000ffe,$4a0066ff,$00001024
-	dc.l	$52aeff78,$4cfb3fff,$01700000,$10204282
-	dc.l	$760247ee,$ef7449ee,$ff70288b,$78fe3d7c
-	dc.l	$0000ff7c,$44fc0000,$48eeffff,$ff804c34
-	dc.l	$34020753,$00001000,$42eeff7e,$48eeffff
-	dc.l	$ffc02d7c,$00000004,$ff8c61ff,$00000fa6
-	dc.l	$4a0066ff,$00000fcc,$52aeff78,$4cfb3fff
-	dc.l	$01700000,$0fc84282,$760247ee,$ef7449ee
-	dc.l	$ff70288b,$78fe3d7c,$0000ff7c,$44fc0000
-	dc.l	$48eeffff,$ff804c34,$34020753,$00001000
-	dc.l	$42eeff7e,$48eeffff,$ffc02d7c,$00000004
-	dc.l	$ff8c61ff,$00000f4e,$4a0066ff,$00000f74
-	dc.l	$52aeff78,$4cfb3fff,$01700000,$0f704282
-	dc.l	$760247ee,$ef7449ee,$ff70288b,$78f0d88c
-	dc.l	$3d7c0000,$ff7c44fc,$000048ee,$ffffff80
-	dc.l	$4c303402,$49b30000,$00100000,$100042ee
-	dc.l	$ff7e48ee,$ffffffc0,$2d7c0000,$0004ff8c
-	dc.l	$61ff0000,$0ef04a00,$66ff0000,$0f1652ae
-	dc.l	$ff7852ae,$ff784cfb,$3fff0170,$00000f0e
-	dc.l	$224e4282,$760247e9,$0f7449e9,$ff70288b
-	dc.l	$2c7cffff,$fffe337c,$0000ff7c,$44fc0000
-	dc.l	$48e9ffff,$ff804c34,$3402ef22,$0010f000
-	dc.l	$42e9ff7e,$48e9ffff,$ffc0237c,$00000004
-	dc.l	$ff8c2c49,$61ff0000,$0e8c4a00,$66ff0000
-	dc.l	$0eb252ae,$ff784cfb,$3fff0170,$00000eae
-	dc.l	$224e4282,$760247e9,$0f7449e9,$ff70288b
-	dc.l	$2c7c0000,$0002337c,$0000ff7c,$44fc0000
-	dc.l	$48e9ffff,$ff804c34,$3402ef22,$fff0f000
-	dc.l	$42e9ff7e,$48e9ffff,$ffc0237c,$00000004
-	dc.l	$ff8c2c49,$61ff0000,$0e2c4a00,$66ff0000
-	dc.l	$0e5252ae,$ff784cfb,$3fff0170,$00000e4e
-	dc.l	$42827602,$47eeff54,$49eeff70,$288b99fc
-	dc.l	$00000010,$78103d7c,$0000ff7c,$44fc0000
-	dc.l	$48eeffff,$ff804c34,$34024126,$00100010
-	dc.l	$42eeff7e,$48eeffff,$ffc02d7c,$00000004
-	dc.l	$ff8c61ff,$00000dce,$4a0066ff,$00000df4
-	dc.l	$52aeff78,$4cfb3fff,$01700000,$0df04282
-	dc.l	$760247ee,$ff5449ee,$ff70288b,$99fc0000
-	dc.l	$00107808,$3d7c0000,$ff7c44fc,$000048ee
-	dc.l	$ffffff80,$4c343402,$43260010,$001042ee
-	dc.l	$ff7e48ee,$ffffffc0,$2d7c0000,$0004ff8c
-	dc.l	$61ff0000,$0d704a00,$66ff0000,$0d9652ae
-	dc.l	$ff784cfb,$3fff0170,$00000d92,$42827602
-	dc.l	$47eeff54,$49eeff70,$288b99fc,$00000010
-	dc.l	$78043d7c,$0000ff7c,$44fc0000,$48eeffff
-	dc.l	$ff804c34,$34024526,$00100010,$42eeff7e
-	dc.l	$48eeffff,$ffc02d7c,$00000004,$ff8c61ff
-	dc.l	$00000d12,$4a0066ff,$00000d38,$52aeff78
-	dc.l	$4cfb3fff,$01700000,$0d344282,$760247ee
-	dc.l	$ff5449ee,$ff70288b,$99fc0000,$00107802
-	dc.l	$3d7c0000,$ff7c44fc,$000048ee,$ffffff80
-	dc.l	$4c343402,$47260010,$001042ee,$ff7e48ee
-	dc.l	$ffffffc0,$2d7c0000,$0004ff8c,$61ff0000
-	dc.l	$0cb44a00,$66ff0000,$0cda52ae,$ff784cfb
-	dc.l	$3fff0170,$00000cd6,$42827602,$47eeff54
-	dc.l	$49eeff70,$288b99fc,$00000010,$78103d7c
-	dc.l	$0000ff7c,$44fc0000,$48eeffff,$ff804c34
-	dc.l	$34024926,$00100010,$42eeff7e,$48eeffff
-	dc.l	$ffc02d7c,$00000004,$ff8c61ff,$00000c56
-	dc.l	$4a0066ff,$00000c7c,$52aeff78,$4cfb3fff
-	dc.l	$01700000,$0c784282,$760247ee,$ff5449ee
-	dc.l	$ff70288b,$99fc0000,$00107808,$3d7c0000
-	dc.l	$ff7c44fc,$000048ee,$ffffff80,$4c343402
-	dc.l	$43260010,$001042ee,$ff7e48ee,$ffffffc0
-	dc.l	$2d7c0000,$0004ff8c,$61ff0000,$0bf84a00
-	dc.l	$66ff0000,$0c1e52ae,$ff784cfb,$3fff0170
-	dc.l	$00000c1a,$42827602,$47eeff54,$49eeff70
-	dc.l	$288b99fc,$00000010,$78043d7c,$0000ff7c
-	dc.l	$44fc0000,$48eeffff,$ff804c34,$34024d26
-	dc.l	$00100010,$42eeff7e,$48eeffff,$ffc02d7c
-	dc.l	$00000004,$ff8c61ff,$00000b9a,$4a0066ff
-	dc.l	$00000bc0,$52aeff78,$4cfb3fff,$01700000
-	dc.l	$0bbc4282,$760247ee,$ff5449ee,$ff70288b
-	dc.l	$99fc0000,$00107802,$3d7c0000,$ff7c44fc
-	dc.l	$000048ee,$ffffff80,$4c343402,$4f260010
-	dc.l	$001042ee,$ff7e48ee,$ffffffc0,$2d7c0000
-	dc.l	$0004ff8c,$61ff0000,$0b3c4a00,$66ff0000
-	dc.l	$0b6252ae,$ff784cfb,$3fff0170,$00000b5e
-	dc.l	$42827602,$47eeff54,$49eeff70,$288b99fc
-	dc.l	$00000010,$78023d7c,$0000ff7c,$44fc0000
-	dc.l	$48eeffff,$ff804c34,$34024f37,$00000010
-	dc.l	$00000010,$42eeff7e,$48eeffff,$ffc02d7c
-	dc.l	$00000004,$ff8c61ff,$00000ada,$4a0066ff
-	dc.l	$00000b00,$52aeff78,$4cfb3fff,$01700000
-	dc.l	$0afc4282,$760247ee,$ff5449ee,$ff70288b
-	dc.l	$78023d7c,$0000ff7c,$44fc0000,$48eeffff
-	dc.l	$ff804c34,$34020753,$00000020,$42eeff7e
-	dc.l	$48eeffff,$ffc02d7c,$00000004,$ff8c61ff
-	dc.l	$00000a82,$4a0066ff,$00000aa8,$52aeff78
-	dc.l	$4cfb3fff,$01700000,$0aa4204f,$42827602
-	dc.l	$47eeff54,$4feeff70,$2e8b7820,$3d7c0000
-	dc.l	$ff7c44fc,$000048ee,$ffffff80,$4c373402
-	dc.l	$491542ee,$ff7e48ee,$ffffffc0,$2d7c0000
-	dc.l	$0004ff8c,$2e4861ff,$00000a2a,$4a0066ff
-	dc.l	$00000a50,$52aeff78,$52aeff78,$4cfb3fff
-	dc.l	$01700000,$0a48224e,$42827602,$47e9ff74
-	dc.l	$4de9ff70,$2c8bddfc,$00000010,$2a7cffff
-	dc.l	$fffe337c,$0000ff7c,$44fc0000,$48e9ffff
-	dc.l	$ff804c36,$3402df27,$fff00000,$001042e9
-	dc.l	$ff7e48e9,$ffffffc0,$237c0000,$0004ff8c
-	dc.l	$2c4961ff,$000009be,$4a0066ff,$000009e4
-	dc.l	$222eff78,$42804e75,$52aeff78,$4cfb3fff
-	dc.l	$01700000,$09d84282,$760247fa,$ef7449fa
-	dc.l	$ff70288b,$78f03d7c,$0000ff7c,$44fc0000
-	dc.l	$48eeffff,$ff804c3b,$34024122,$ff801000
-	dc.l	$42eeff7e,$48eeffff,$ffc02d7c,$00000004
-	dc.l	$ff8c61ff,$0000095e,$4a0066ff,$00000984
-	dc.l	$52aeff78,$4cfb3fff,$01700000,$09804282
-	dc.l	$760247fa,$ef7449fa,$ff70288b,$78f83d7c
-	dc.l	$0000ff7c,$44fc0000,$48eeffff,$ff804c3b
-	dc.l	$34024322,$ff801000,$42eeff7e,$48eeffff
-	dc.l	$ffc02d7c,$00000004,$ff8c61ff,$00000906
-	dc.l	$4a0066ff,$0000092c,$52aeff78,$4cfb3fff
-	dc.l	$01700000,$09284282,$760247fa,$ef7449fa
-	dc.l	$ff70288b,$78fc3d7c,$0000ff7c,$44fc0000
-	dc.l	$48eeffff,$ff804c3b,$34024522,$ff801000
-	dc.l	$42eeff7e,$48eeffff,$ffc02d7c,$00000004
-	dc.l	$ff8c61ff,$000008ae,$4a0066ff,$000008d4
-	dc.l	$52aeff78,$4cfb3fff,$01700000,$08d04282
-	dc.l	$760247fa,$ef7449fa,$ff70288b,$78fe3d7c
-	dc.l	$0000ff7c,$44fc0000,$48eeffff,$ff804c3b
-	dc.l	$34024722,$ff801000,$42eeff7e,$48eeffff
-	dc.l	$ffc02d7c,$00000004,$ff8c61ff,$00000856
-	dc.l	$4a0066ff,$0000087c,$52aeff78,$4cfb3fff
-	dc.l	$01700000,$08784282,$760247fa,$ef7449fa
-	dc.l	$ff70288b,$78f03d7c,$0000ff7c,$44fc0000
-	dc.l	$48eeffff,$ff804c3b,$34024922,$ff801000
-	dc.l	$42eeff7e,$48eeffff,$ffc02d7c,$00000004
-	dc.l	$ff8c61ff,$000007fe,$4a0066ff,$00000824
-	dc.l	$52aeff78,$4cfb3fff,$01700000,$08204282
-	dc.l	$760247fa,$ef7449fa,$ff70288b,$78f83d7c
-	dc.l	$0000ff7c,$44fc0000,$48eeffff,$ff804c3b
-	dc.l	$34024b22,$ff801000,$42eeff7e,$48eeffff
-	dc.l	$ffc02d7c,$00000004,$ff8c61ff,$000007a6
-	dc.l	$4a0066ff,$000007cc,$52aeff78,$4cfb3fff
-	dc.l	$01700000,$07c84282,$760247fa,$ef7449fa
-	dc.l	$ff70288b,$78fc3d7c,$0000ff7c,$44fc0000
-	dc.l	$48eeffff,$ff804c3b,$34024d22,$ff801000
-	dc.l	$42eeff7e,$48eeffff,$ffc02d7c,$00000004
-	dc.l	$ff8c61ff,$0000074e,$4a0066ff,$00000774
-	dc.l	$52aeff78,$4cfb3fff,$01700000,$07704282
-	dc.l	$760247fa,$ef7449fa,$ff70288b,$78fe3d7c
-	dc.l	$0000ff7c,$44fc0000,$48eeffff,$ff804c3b
-	dc.l	$34024f22,$ff801000,$42eeff7e,$48eeffff
-	dc.l	$ffc02d7c,$00000004,$ff8c61ff,$000006f6
-	dc.l	$4a0066ff,$0000071c,$52aeff78,$4cfb3fff
-	dc.l	$01700000,$07184282,$760247fa,$ef7449fa
-	dc.l	$ff70288b,$78fe3d7c,$0000ff7c,$44fc0000
-	dc.l	$48eeffff,$ff804c3b,$34024f33,$ffffff80
-	dc.l	$00001000,$42eeff7e,$48eeffff,$ffc02d7c
-	dc.l	$00000004,$ff8c61ff,$0000069a,$4a0066ff
-	dc.l	$000006c0,$52aeff78,$4cfb3fff,$01700000
-	dc.l	$06bc4282,$760247fa,$ef7449fa,$ff70288b
-	dc.l	$78fe3d7c,$0000ff7c,$44fc0000,$48eeffff
-	dc.l	$ff804c3b,$34020773,$ffffff70,$00001000
-	dc.l	$42eeff7e,$48eeffff,$ffc02d7c,$00000004
-	dc.l	$ff8c61ff,$0000063e,$4a0066ff,$00000664
-	dc.l	$52aeff78,$4cfb3fff,$01700000,$06604282
-	dc.l	$760247fa,$ef7449fa,$ff70288b,$280c3d7c
-	dc.l	$0000ff7c,$44fc0000,$48eeffff,$ff804c30
-	dc.l	$34024993,$00001000,$42eeff7e,$48eeffff
-	dc.l	$ffc02d7c,$00000004,$ff8c61ff,$000005e6
-	dc.l	$4a0066ff,$0000060c,$52aeff78,$4cfb3fff
-	dc.l	$01700000,$06084282,$760247fa,$ef7449fa
-	dc.l	$ff70288b,$78f0d88c,$3d7c0000,$ff7c44fc
-	dc.l	$000048ee,$ffffff80,$4c303402,$49b30000
-	dc.l	$00100000,$100042ee,$ff7e48ee,$ffffffc0
-	dc.l	$2d7c0000,$0004ff8c,$61ff0000,$05884a00
-	dc.l	$66ff0000,$05ae52ae,$ff784282,$760247fa
-	dc.l	$ff7449fa,$ff70288b,$78f03d7c,$0000ff7c
-	dc.l	$44fc0000,$48eeffff,$ff804c30,$340201f1
-	dc.l	$ffffff70,$42eeff7e,$48eeffff,$ffc02d7c
-	dc.l	$00000004,$ff8c61ff,$0000053a,$4a0066ff
-	dc.l	$00000560,$52aeff78,$4cfb3fff,$01700000
-	dc.l	$055c4282,$760247fa,$0f7449fa,$ff70288b
-	dc.l	$2c7c0000,$00023d7c,$0000ff7c,$44fc0000
-	dc.l	$48eeffff,$ff804c3b,$3402ef22,$ff60f000
-	dc.l	$42eeff7e,$48eeffff,$ffc02d7c,$00000004
-	dc.l	$ff8c61ff,$000004de,$4a0066ff,$00000504
-	dc.l	$52aeff78,$4cfb3fff,$01700000,$0500204f
-	dc.l	$42827602,$47fa0f74,$49faff70,$288b2e7c
-	dc.l	$00000002,$3d7c0000,$ff7c44fc,$000048ee
-	dc.l	$ffffff80,$4c3b3402,$ff22ff60,$f00042ee
-	dc.l	$ff7e48ee,$ffffffc0,$2d7c0000,$0004ff8c
-	dc.l	$2e4861ff,$0000047e,$4a0066ff,$000004a4
-	dc.l	$52aeff78,$4cfb3fff,$01700000,$04a04282
-	dc.l	$760247fa,$ff5449fa,$ff70288b,$99fc0000
-	dc.l	$00107810,$3d7c0000,$ff7c44fc,$000048ee
-	dc.l	$ffffff80,$4c3b3402,$4126ff70,$001042ee
-	dc.l	$ff7e48ee,$ffffffc0,$2d7c0000,$0004ff8c
-	dc.l	$61ff0000,$04204a00,$66ff0000,$044652ae
-	dc.l	$ff784cfb,$3fff0170,$00000442,$42827602
-	dc.l	$47faff54,$49faff70,$288b99fc,$00000010
-	dc.l	$78083d7c,$0000ff7c,$44fc0000,$48eeffff
-	dc.l	$ff804c3b,$34024326,$ff700010,$42eeff7e
-	dc.l	$48eeffff,$ffc02d7c,$00000004,$ff8c61ff
-	dc.l	$000003c2,$4a0066ff,$000003e8,$52aeff78
-	dc.l	$4cfb3fff,$01700000,$03e44282,$760247fa
-	dc.l	$ff5449fa,$ff70288b,$99fc0000,$00107804
-	dc.l	$3d7c0000,$ff7c44fc,$000048ee,$ffffff80
-	dc.l	$4c3b3402,$4526ff70,$001042ee,$ff7e48ee
-	dc.l	$ffffffc0,$2d7c0000,$0004ff8c,$61ff0000
-	dc.l	$03644a00,$66ff0000,$038a52ae,$ff784cfb
-	dc.l	$3fff0170,$00000386,$42827602,$47faff54
-	dc.l	$49faff70,$288b99fc,$00000010,$78023d7c
-	dc.l	$0000ff7c,$44fc0000,$48eeffff,$ff804c3b
-	dc.l	$34024726,$ff700010,$42eeff7e,$48eeffff
-	dc.l	$ffc02d7c,$00000004,$ff8c61ff,$00000306
-	dc.l	$4a0066ff,$0000032c,$52aeff78,$4cfb3fff
-	dc.l	$01700000,$03284282,$760247fa,$ff5449fa
-	dc.l	$ff70288b,$99fc0000,$00107810,$3d7c0000
-	dc.l	$ff7c44fc,$000048ee,$ffffff80,$4c3b3402
-	dc.l	$4926ff70,$001042ee,$ff7e48ee,$ffffffc0
-	dc.l	$2d7c0000,$0004ff8c,$61ff0000,$02a84a00
-	dc.l	$66ff0000,$02ce52ae,$ff784cfb,$3fff0170
-	dc.l	$000002ca,$42827602,$47faff54,$49faff70
-	dc.l	$288b99fc,$00000010,$78083d7c,$0000ff7c
-	dc.l	$44fc0000,$48eeffff,$ff804c3b,$34024326
-	dc.l	$ff700010,$42eeff7e,$48eeffff,$ffc02d7c
-	dc.l	$00000004,$ff8c61ff,$0000024a,$4a0066ff
-	dc.l	$00000270,$52aeff78,$4cfb3fff,$01700000
-	dc.l	$026c4282,$760247fa,$ff5449fa,$ff70288b
-	dc.l	$99fc0000,$00107804,$3d7c0000,$ff7c44fc
-	dc.l	$000048ee,$ffffff80,$4c3b3402,$4d26ff70
-	dc.l	$001042ee,$ff7e48ee,$ffffffc0,$2d7c0000
-	dc.l	$0004ff8c,$61ff0000,$01ec4a00,$66ff0000
-	dc.l	$021252ae,$ff784cfb,$3fff0170,$0000020e
-	dc.l	$42827602,$47faff54,$49faff70,$288b99fc
-	dc.l	$00000010,$78023d7c,$0000ff7c,$44fc0000
-	dc.l	$48eeffff,$ff804c3b,$34024f26,$ff700010
-	dc.l	$42eeff7e,$48eeffff,$ffc02d7c,$00000004
-	dc.l	$ff8c61ff,$0000018e,$4a0066ff,$000001b4
-	dc.l	$52aeff78,$4cfb3fff,$01700000,$01b04282
-	dc.l	$760247fa,$ff5449fa,$ff70288b,$99fc0000
-	dc.l	$00107802,$3d7c0000,$ff7c44fc,$000048ee
-	dc.l	$ffffff80,$4c3b3402,$4f37ffff,$ff700000
-	dc.l	$001042ee,$ff7e48ee,$ffffffc0,$2d7c0000
-	dc.l	$0004ff8c,$61ff0000,$012c4a00,$66ff0000
-	dc.l	$015252ae,$ff784cfb,$3fff0170,$0000014e
-	dc.l	$42827602,$47faff54,$49faff70,$288b7802
-	dc.l	$3d7c0000,$ff7c44fc,$000048ee,$ffffff80
-	dc.l	$4c3b3402,$0773ffff,$ff700000,$002042ee
-	dc.l	$ff7e48ee,$ffffffc0,$2d7c0000,$0004ff8c
-	dc.l	$61ff0000,$00d04a00,$66ff0000,$00f652ae
-	dc.l	$ff784cfb,$3fff0170,$000000f2,$42827602
-	dc.l	$47faff54,$49faff70,$288b7804,$3d7c0000
-	dc.l	$ff7c44fc,$000048ee,$ffffff80,$4c303402
-	dc.l	$4fb5ffff,$ff7042ee,$ff7e48ee,$ffffffc0
-	dc.l	$2d7c0000,$0004ff8c,$61ff0000,$00784a00
-	dc.l	$66ff0000,$009e52ae,$ff784cfb,$3fff0170
-	dc.l	$0000009a,$204f4282,$760247fa,$ff744dfa
-	dc.l	$ff702c8b,$ddfc0000,$00102e7c,$fffffffe
-	dc.l	$3d7c0000,$ff7c44fc,$000048ee,$ffffff80
-	dc.l	$4c3b3402,$ff27ff70,$00000010,$42eeff7e
-	dc.l	$48eeffff,$ffc02d7c,$00000004,$ff8c2e48
-	dc.l	$61ff0000,$00104a00,$66ff0000,$00364280
-	dc.l	$4e7541ee,$ff8043ee,$ffc0700e,$b18966ff
-	dc.l	$0000001c,$51c8fff6,$302eff7c,$322eff7e
-	dc.l	$b04166ff,$00000008,$42804e75,$70014e75
-	dc.l	$222eff78,$70014e75,$acacacac,$acacacac
-	dc.l	$acacacac,$acacacac,$acacacac,$acacacac
-	dc.l	$acacacac,$acacacac,$acacacac,$acacacac
-	dc.l	$acacacac,$acacacac,$acacacac,$acacacac
-	dc.l	$acacacac,$acacacac,$2f00203a,$afa4487b
-	dc.l	$0930ffff,$afa0202f,$00044e74,$00042f00
-	dc.l	$203aaf92,$487b0930,$ffffaf8a,$202f0004
-	dc.l	$4e740004,$00000000,$00000000,$00000000
diff --git a/ANDROID_3.4.5/arch/m68k/ifpsp060/os.S b/ANDROID_3.4.5/arch/m68k/ifpsp060/os.S
deleted file mode 100644
index 7a0d6e42..00000000
--- a/ANDROID_3.4.5/arch/m68k/ifpsp060/os.S
+++ /dev/null
@@ -1,396 +0,0 @@
-|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-|MOTOROLA MICROPROCESSOR & MEMORY TECHNOLOGY GROUP
-|M68000 Hi-Performance Microprocessor Division
-|M68060 Software Package
-|Production Release P1.00 -- October 10, 1994
-|
-|M68060 Software Package Copyright © 1993, 1994 Motorola Inc.  All rights reserved.
-|
-|THE SOFTWARE is provided on an "AS IS" basis and without warranty.
-|To the maximum extent permitted by applicable law,
-|MOTOROLA DISCLAIMS ALL WARRANTIES WHETHER EXPRESS OR IMPLIED,
-|INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
-|and any warranty against infringement with regard to the SOFTWARE
-|(INCLUDING ANY MODIFIED VERSIONS THEREOF) and any accompanying written materials.
-|
-|To the maximum extent permitted by applicable law,
-|IN NO EVENT SHALL MOTOROLA BE LIABLE FOR ANY DAMAGES WHATSOEVER
-|(INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS,
-|BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, OR OTHER PECUNIARY LOSS)
-|ARISING OF THE USE OR INABILITY TO USE THE SOFTWARE.
-|Motorola assumes no responsibility for the maintenance and support of the SOFTWARE.
-|
-|You are hereby granted a copyright license to use, modify, and distribute the SOFTWARE
-|so long as this entire notice is retained without alteration in any modified and/or
-|redistributed versions, and that such modified versions are clearly identified as such.
-|No licenses are granted by implication, estoppel or otherwise under any patents
-|or trademarks of Motorola, Inc.
-|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-| os.s
-|
-| This file contains:
-|	- example "Call-Out"s required by both the ISP and FPSP.
-|
-
-#include <linux/linkage.h>
-
-|################################
-| EXAMPLE CALL-OUTS		#
-|				#
-| _060_dmem_write()		#
-| _060_dmem_read()		#
-| _060_imem_read()		#
-| _060_dmem_read_byte()		#
-| _060_dmem_read_word()		#
-| _060_dmem_read_long()		#
-| _060_imem_read_word()		#
-| _060_imem_read_long()		#
-| _060_dmem_write_byte()	#
-| _060_dmem_write_word()	#
-| _060_dmem_write_long()	#
-|				#
-| _060_real_trace()		#
-| _060_real_access()		#
-|################################
-
-|
-| Each IO routine checks to see if the memory write/read is to/from user
-| or supervisor application space. The examples below use simple "move"
-| instructions for supervisor mode applications and call _copyin()/_copyout()
-| for user mode applications.
-| When installing the 060SP, the _copyin()/_copyout() equivalents for a
-| given operating system should be substituted.
-|
-| The addresses within the 060SP are guaranteed to be on the stack.
-| The result is that Unix processes are allowed to sleep as a consequence
-| of a page fault during a _copyout.
-|
-| Linux/68k: The _060_[id]mem_{read,write}_{byte,word,long} functions
-| (i.e. all the known length <= 4) are implemented by single moves
-| statements instead of (more expensive) copy{in,out} calls, if
-| working in user space
-
-|
-| _060_dmem_write():
-|
-| Writes to data memory while in supervisor mode.
-|
-| INPUTS:
-|	a0 - supervisor source address
-|	a1 - user destination address
-|	d0 - number of bytes to write
-|	0x4(%a6),bit5 - 1 = supervisor mode, 0 = user mode
-| OUTPUTS:
-|	d1 - 0 = success, !0 = failure
-|
-	.global		_060_dmem_write
-_060_dmem_write:
-	subq.l		#1,%d0
-	btst		#0x5,0x4(%a6)		| check for supervisor state
-	beqs		user_write
-super_write:
-	move.b		(%a0)+,(%a1)+		| copy 1 byte
-	dbra		%d0,super_write		| quit if --ctr < 0
-	clr.l		%d1			| return success
-	rts
-user_write:
-	move.b		(%a0)+,%d1		| copy 1 byte
-copyoutae:
-	movs.b		%d1,(%a1)+
-	dbra		%d0,user_write		| quit if --ctr < 0
-	clr.l		%d1			| return success
-	rts
-
-|
-| _060_imem_read(), _060_dmem_read():
-|
-| Reads from data/instruction memory while in supervisor mode.
-|
-| INPUTS:
-|	a0 - user source address
-|	a1 - supervisor destination address
-|	d0 - number of bytes to read
-|	0x4(%a6),bit5 - 1 = supervisor mode, 0 = user mode
-| OUTPUTS:
-|	d1 - 0 = success, !0 = failure
-|
-	.global		_060_imem_read
-	.global		_060_dmem_read
-_060_imem_read:
-_060_dmem_read:
-	subq.l		#1,%d0
-	btst		#0x5,0x4(%a6)		| check for supervisor state
-	beqs		user_read
-super_read:
-	move.b		(%a0)+,(%a1)+		| copy 1 byte
-	dbra		%d0,super_read		| quit if --ctr < 0
-	clr.l		%d1			| return success
-	rts
-user_read:
-copyinae:
-	movs.b		(%a0)+,%d1
-	move.b		%d1,(%a1)+		| copy 1 byte
-	dbra		%d0,user_read		| quit if --ctr < 0
-	clr.l		%d1			| return success
-	rts
-
-|
-| _060_dmem_read_byte():
-|
-| Read a data byte from user memory.
-|
-| INPUTS:
-|	a0 - user source address
-|	0x4(%a6),bit5 - 1 = supervisor mode, 0 = user mode
-| OUTPUTS:
-|	d0 - data byte in d0
-|	d1 - 0 = success, !0 = failure
-|
-	.global		_060_dmem_read_byte
-_060_dmem_read_byte:
-	clr.l		%d0			| clear whole longword
-	clr.l		%d1			| assume success
-	btst		#0x5,0x4(%a6)		| check for supervisor state
-	bnes		dmrbs			| supervisor
-dmrbuae:movs.b		(%a0),%d0		| fetch user byte
-	rts
-dmrbs:	move.b		(%a0),%d0		| fetch super byte
-	rts
-
-|
-| _060_dmem_read_word():
-|
-| Read a data word from user memory.
-|
-| INPUTS:
-|	a0 - user source address
-|	0x4(%a6),bit5 - 1 = supervisor mode, 0 = user mode
-| OUTPUTS:
-|	d0 - data word in d0
-|	d1 - 0 = success, !0 = failure
-|
-| _060_imem_read_word():
-|
-| Read an instruction word from user memory.
-|
-| INPUTS:
-|	a0 - user source address
-|	0x4(%a6),bit5 - 1 = supervisor mode, 0 = user mode
-| OUTPUTS:
-|	d0 - instruction word in d0
-|	d1 - 0 = success, !0 = failure
-|
-	.global		_060_dmem_read_word
-	.global		_060_imem_read_word
-_060_dmem_read_word:
-_060_imem_read_word:
-	clr.l		%d1			| assume success
-	clr.l		%d0			| clear whole longword
-	btst		#0x5,0x4(%a6)		| check for supervisor state
-	bnes		dmrws			| supervisor
-dmrwuae:movs.w		(%a0), %d0		| fetch user word
-	rts
-dmrws:	move.w		(%a0), %d0		| fetch super word
-	rts
-
-|
-| _060_dmem_read_long():
-|
-
-|
-| INPUTS:
-|	a0 - user source address
-|	0x4(%a6),bit5 - 1 = supervisor mode, 0 = user mode
-| OUTPUTS:
-|	d0 - data longword in d0
-|	d1 - 0 = success, !0 = failure
-|
-| _060_imem_read_long():
-|
-| Read an instruction longword from user memory.
-|
-| INPUTS:
-|	a0 - user source address
-|	0x4(%a6),bit5 - 1 = supervisor mode, 0 = user mode
-| OUTPUTS:
-|	d0 - instruction longword in d0
-|	d1 - 0 = success, !0 = failure
-|
-	.global		_060_dmem_read_long
-	.global		_060_imem_read_long
-_060_dmem_read_long:
-_060_imem_read_long:
-	clr.l		%d1			| assume success
-	btst		#0x5,0x4(%a6)		| check for supervisor state
-	bnes		dmrls			| supervisor
-dmrluae:movs.l		(%a0),%d0		| fetch user longword
-	rts
-dmrls:	move.l		(%a0),%d0		| fetch super longword
-	rts
-
-|
-| _060_dmem_write_byte():
-|
-| Write a data byte to user memory.
-|
-| INPUTS:
-|	a0 - user destination address
-|	d0 - data byte in d0
-|	0x4(%a6),bit5 - 1 = supervisor mode, 0 = user mode
-| OUTPUTS:
-|	d1 - 0 = success, !0 = failure
-|
-	.global		_060_dmem_write_byte
-_060_dmem_write_byte:
-	clr.l		%d1			| assume success
-	btst		#0x5,0x4(%a6)		| check for supervisor state
-	bnes		dmwbs			| supervisor
-dmwbuae:movs.b		%d0,(%a0)		| store user byte
-	rts
-dmwbs:	move.b		%d0,(%a0)		| store super byte
-	rts
-
-|
-| _060_dmem_write_word():
-|
-| Write a data word to user memory.
-|
-| INPUTS:
-|	a0 - user destination address
-|	d0 - data word in d0
-|	0x4(%a6),bit5 - 1 = supervisor mode, 0 = user mode
-| OUTPUTS:
-|	d1 - 0 = success, !0 = failure
-|
-	.global		_060_dmem_write_word
-_060_dmem_write_word:
-	clr.l		%d1			| assume success
-	btst		#0x5,0x4(%a6)		| check for supervisor state
-	bnes		dmwws			| supervisor
-dmwwu:
-dmwwuae:movs.w		%d0,(%a0)		| store user word
-	bras		dmwwr
-dmwws:	move.w		%d0,(%a0)		| store super word
-dmwwr:	clr.l		%d1			| return success
-	rts
-
-|
-| _060_dmem_write_long():
-|
-| Write a data longword to user memory.
-|
-| INPUTS:
-|	a0 - user destination address
-|	d0 - data longword in d0
-|	0x4(%a6),bit5 - 1 = supervisor mode, 0 = user mode
-| OUTPUTS:
-|	d1 - 0 = success, !0 = failure
-|
-	.global		_060_dmem_write_long
-_060_dmem_write_long:
-	clr.l		%d1			| assume success
-	btst		#0x5,0x4(%a6)		| check for supervisor state
-	bnes		dmwls			| supervisor
-dmwluae:movs.l		%d0,(%a0)		| store user longword
-	rts
-dmwls:	move.l		%d0,(%a0)		| store super longword
-	rts
-
-
-#if 0
-|###############################################
-
-|
-| Use these routines if your kernel doesn't have _copyout/_copyin equivalents.
-| Assumes that D0/D1/A0/A1 are scratch registers. The _copyin/_copyout
-| below assume that the SFC/DFC have been set previously.
-|
-| Linux/68k: These are basically non-inlined versions of
-| memcpy_{to,from}fs, but without long-transfer optimization
-| Note: Assumed that SFC/DFC are pointing correctly to user data
-| space... Should be right, or are there any exceptions?
-
-|
-| int _copyout(supervisor_addr, user_addr, nbytes)
-|
-	.global		_copyout
-_copyout:
-	move.l		4(%sp),%a0		| source
-	move.l		8(%sp),%a1		| destination
-	move.l		12(%sp),%d0		| count
-	subq.l		#1,%d0
-moreout:
-	move.b		(%a0)+,%d1		| fetch supervisor byte
-copyoutae:
-	movs.b		%d1,(%a1)+		| store user byte
-	dbra		%d0,moreout		| are we through yet?
-	moveq		#0,%d0			| return success
-	rts
-
-|
-| int _copyin(user_addr, supervisor_addr, nbytes)
-|
-	.global		_copyin
-_copyin:
-	move.l		4(%sp),%a0		| source
-	move.l		8(%sp),%a1		| destination
-	move.l		12(%sp),%d0		| count
-    subq.l      #1,%d0
-morein:
-copyinae:
-	movs.b		(%a0)+,%d1		| fetch user byte
-	move.b		%d1,(%a1)+		| write supervisor byte
-	dbra		%d0,morein		| are we through yet?
-	moveq		#0,%d0			| return success
-	rts
-#endif
-
-|###########################################################################
-
-|
-| _060_real_trace():
-|
-| This is the exit point for the 060FPSP when an instruction is being traced
-| and there are no other higher priority exceptions pending for this instruction
-| or they have already been processed.
-|
-| The sample code below simply executes an "rte".
-|
-	.global		_060_real_trace
-_060_real_trace:
-	bral	trap
-
-|
-| _060_real_access():
-|
-| This is the exit point for the 060FPSP when an access error exception
-| is encountered. The routine below should point to the operating system
-| handler for access error exceptions. The exception stack frame is an
-| 8-word access error frame.
-|
-| The sample routine below simply executes an "rte" instruction which
-| is most likely the incorrect thing to do and could put the system
-| into an infinite loop.
-|
-	.global		_060_real_access
-_060_real_access:
-	bral	buserr
-
-
-
-| Execption handling for movs access to illegal memory
-	.section .fixup,#alloc,#execinstr
-	.even
-1:	moveq		#-1,%d1
-	rts
-.section __ex_table,#alloc
-	.align 4
-	.long	dmrbuae,1b
-	.long	dmrwuae,1b
-	.long	dmrluae,1b
-	.long	dmwbuae,1b
-	.long	dmwwuae,1b
-	.long	dmwluae,1b
-	.long	copyoutae,1b
-	.long	copyinae,1b
-	.text
diff --git a/ANDROID_3.4.5/arch/m68k/ifpsp060/pfpsp.sa b/ANDROID_3.4.5/arch/m68k/ifpsp060/pfpsp.sa
deleted file mode 100644
index d276b27f..00000000
--- a/ANDROID_3.4.5/arch/m68k/ifpsp060/pfpsp.sa
+++ /dev/null
@@ -1,1730 +0,0 @@
-	dc.l	$60ff0000,$17400000,$60ff0000,$15f40000
-	dc.l	$60ff0000,$02b60000,$60ff0000,$04700000
-	dc.l	$60ff0000,$1b100000,$60ff0000,$19aa0000
-	dc.l	$60ff0000,$1b5a0000,$60ff0000,$062e0000
-	dc.l	$60ff0000,$102c0000,$51fc51fc,$51fc51fc
-	dc.l	$51fc51fc,$51fc51fc,$51fc51fc,$51fc51fc
-	dc.l	$51fc51fc,$51fc51fc,$51fc51fc,$51fc51fc
-	dc.l	$51fc51fc,$51fc51fc,$51fc51fc,$51fc51fc
-	dc.l	$2f00203a,$ff2c487b,$0930ffff,$fef8202f
-	dc.l	$00044e74,$00042f00,$203afef2,$487b0930
-	dc.l	$fffffee2,$202f0004,$4e740004,$2f00203a
-	dc.l	$fee0487b,$0930ffff,$fecc202f,$00044e74
-	dc.l	$00042f00,$203afed2,$487b0930,$fffffeb6
-	dc.l	$202f0004,$4e740004,$2f00203a,$fea4487b
-	dc.l	$0930ffff,$fea0202f,$00044e74,$00042f00
-	dc.l	$203afe96,$487b0930,$fffffe8a,$202f0004
-	dc.l	$4e740004,$2f00203a,$fe7c487b,$0930ffff
-	dc.l	$fe74202f,$00044e74,$00042f00,$203afe76
-	dc.l	$487b0930,$fffffe5e,$202f0004,$4e740004
-	dc.l	$2f00203a,$fe68487b,$0930ffff,$fe48202f
-	dc.l	$00044e74,$00042f00,$203afe56,$487b0930
-	dc.l	$fffffe32,$202f0004,$4e740004,$2f00203a
-	dc.l	$fe44487b,$0930ffff,$fe1c202f,$00044e74
-	dc.l	$00042f00,$203afe32,$487b0930,$fffffe06
-	dc.l	$202f0004,$4e740004,$2f00203a,$fe20487b
-	dc.l	$0930ffff,$fdf0202f,$00044e74,$00042f00
-	dc.l	$203afe1e,$487b0930,$fffffdda,$202f0004
-	dc.l	$4e740004,$2f00203a,$fe0c487b,$0930ffff
-	dc.l	$fdc4202f,$00044e74,$00042f00,$203afdfa
-	dc.l	$487b0930,$fffffdae,$202f0004,$4e740004
-	dc.l	$2f00203a,$fde8487b,$0930ffff,$fd98202f
-	dc.l	$00044e74,$00042f00,$203afdd6,$487b0930
-	dc.l	$fffffd82,$202f0004,$4e740004,$2f00203a
-	dc.l	$fdc4487b,$0930ffff,$fd6c202f,$00044e74
-	dc.l	$00042f00,$203afdb2,$487b0930,$fffffd56
-	dc.l	$202f0004,$4e740004,$2f00203a,$fda0487b
-	dc.l	$0930ffff,$fd40202f,$00044e74,$00042f00
-	dc.l	$203afd8e,$487b0930,$fffffd2a,$202f0004
-	dc.l	$4e740004,$2f00203a,$fd7c487b,$0930ffff
-	dc.l	$fd14202f,$00044e74,$00042f00,$203afd6a
-	dc.l	$487b0930,$fffffcfe,$202f0004,$4e740004
-	dc.l	$40c62d38,$d3d64634,$3d6f90ae,$b1e75cc7
-	dc.l	$40000000,$c90fdaa2,$2168c235,$00000000
-	dc.l	$3fff0000,$c90fdaa2,$2168c235,$00000000
-	dc.l	$3fe45f30,$6dc9c883,$4e56ff40,$f32eff6c
-	dc.l	$48ee0303,$ff9cf22e,$bc00ff60,$f22ef0c0
-	dc.l	$ffdc2d6e,$ff68ff44,$206eff44,$58aeff44
-	dc.l	$61ffffff,$ff042d40,$ff40082e,$0005ff42
-	dc.l	$66000116,$41eeff6c,$61ff0000,$051c41ee
-	dc.l	$ff6c61ff,$00002aec,$1d40ff4e,$082e0005
-	dc.l	$ff436726,$e9ee0183,$ff4261ff,$00005cac
-	dc.l	$41eeff78,$61ff0000,$2aca0c00,$00066606
-	dc.l	$61ff0000,$2a2e1d40,$ff4f4280,$102eff63
-	dc.l	$122eff43,$0241007f,$02ae00ff,$01ffff64
-	dc.l	$f23c9000,$00000000,$f23c8800,$00000000
-	dc.l	$41eeff6c,$43eeff78,$223b1530,$00001974
-	dc.l	$4ebb1930,$0000196c,$e9ee0183,$ff4261ff
-	dc.l	$00005cd8,$082e0004,$ff626622,$082e0001
-	dc.l	$ff626644,$f22ed0c0,$ffdcf22e,$9c00ff60
-	dc.l	$4cee0303,$ff9c4e5e,$60ffffff,$fcc6f22e
-	dc.l	$f040ff6c,$3d7ce005,$ff6ef22e,$d0c0ffdc
-	dc.l	$f22e9c00,$ff604cee,$0303ff9c,$f36eff6c
-	dc.l	$4e5e60ff,$fffffcb2,$f22ef040,$ff6c1d7c
-	dc.l	$00c4000b,$3d7ce001,$ff6ef22e,$d0c0ffdc
-	dc.l	$f22e9c00,$ff604cee,$0303ff9c,$f36eff6c
-	dc.l	$4e5e60ff,$fffffcae,$1d7c0000,$ff4e4280
-	dc.l	$102eff63,$02aeffff,$00ffff64,$f23c9000
-	dc.l	$00000000,$f23c8800,$00000000,$41eeff6c
-	dc.l	$61ff0000,$2e0c082e,$0004ff62,$6600ff70
-	dc.l	$082e0001,$ff626600,$ff90f22e,$d0c0ffdc
-	dc.l	$f22e9c00,$ff604cee,$0303ff9c,$4e5e0817
-	dc.l	$000767ff,$fffffc0c,$f22fa400,$00083f7c
-	dc.l	$20240006,$60ffffff,$fcec4e56,$ff40f32e
-	dc.l	$ff6c48ee,$0303ff9c,$f22ebc00,$ff60f22e
-	dc.l	$f0c0ffdc,$2d6eff68,$ff44206e,$ff4458ae
-	dc.l	$ff4461ff,$fffffd42,$2d40ff40,$082e0005
-	dc.l	$ff426600,$013241ee,$ff6c61ff,$0000035a
-	dc.l	$41eeff6c,$61ff0000,$292a1d40,$ff4e082e
-	dc.l	$0005ff43,$672e082e,$0004ff43,$6626e9ee
-	dc.l	$0183ff42,$61ff0000,$5ae241ee,$ff7861ff
-	dc.l	$00002900,$0c000006,$660661ff,$00002864
-	dc.l	$1d40ff4f,$4280102e,$ff63122e,$ff430241
-	dc.l	$007f02ae,$00ff01ff,$ff64f23c,$90000000
-	dc.l	$0000f23c,$88000000,$000041ee,$ff6c43ee
-	dc.l	$ff78223b,$15300000,$17aa4ebb,$19300000
-	dc.l	$17a2e9ee,$0183ff42,$61ff0000,$5b0e082e
-	dc.l	$0003ff62,$6622082e,$0001ff62,$664ef22e
-	dc.l	$d0c0ffdc,$f22e9c00,$ff604cee,$0303ff9c
-	dc.l	$4e5e60ff,$fffffafc,$082e0003,$ff666700
-	dc.l	$ffd6f22e,$f040ff6c,$3d7ce003,$ff6ef22e
-	dc.l	$d0c0ffdc,$f22e9c00,$ff604cee,$0303ff9c
-	dc.l	$f36eff6c,$4e5e60ff,$fffffaf4,$082e0001
-	dc.l	$ff666700,$ffaaf22e,$f040ff6c,$1d7c00c4
-	dc.l	$000b3d7c,$e001ff6e,$f22ed0c0,$ffdcf22e
-	dc.l	$9c00ff60,$4cee0303,$ff9cf36e,$ff6c4e5e
-	dc.l	$60ffffff,$fad01d7c,$0000ff4e,$4280102e
-	dc.l	$ff6302ae,$ffff00ff,$ff64f23c,$90000000
-	dc.l	$0000f23c,$88000000,$000041ee,$ff6c61ff
-	dc.l	$00002c2e,$082e0003,$ff626600,$ff66082e
-	dc.l	$0001ff62,$6600ff90,$f22ed0c0,$ffdcf22e
-	dc.l	$9c00ff60,$4cee0303,$ff9c4e5e,$08170007
-	dc.l	$67ffffff,$fa2ef22f,$a4000008,$3f7c2024
-	dc.l	$000660ff,$fffffb0e,$4e56ff40,$f32eff6c
-	dc.l	$48ee0303,$ff9cf22e,$bc00ff60,$f22ef0c0
-	dc.l	$ffdc082e,$00050004,$66084e68,$2d48ffd8
-	dc.l	$600841ee,$00102d48,$ffd82d6e,$ff68ff44
-	dc.l	$206eff44,$58aeff44,$61ffffff,$fb4c2d40
-	dc.l	$ff40422e,$ff4a082e,$0005ff42,$66000208
-	dc.l	$e9ee0006,$ff420c00,$00136700,$049e02ae
-	dc.l	$00ff00ff,$ff64f23c,$90000000,$0000f23c
-	dc.l	$88000000,$000041ee,$ff6c61ff,$0000013a
-	dc.l	$41eeff6c,$61ff0000,$270a0c00,$00066606
-	dc.l	$61ff0000,$266e1d40,$ff4ee9ee,$0183ff42
-	dc.l	$082e0005,$ff436728,$0c2e003a,$ff436720
-	dc.l	$61ff0000,$58b641ee,$ff7861ff,$000026d4
-	dc.l	$0c000006,$660661ff,$00002638,$1d40ff4f
-	dc.l	$4280102e,$ff63e9ee,$1047ff43,$41eeff6c
-	dc.l	$43eeff78,$223b1d30,$00001598,$4ebb1930
-	dc.l	$00001590,$102eff62,$6634102e,$ff430200
-	dc.l	$00380c00,$0038670c,$e9ee0183,$ff4261ff
-	dc.l	$000058e8,$f22ed0c0,$ffdcf22e,$9c00ff60
-	dc.l	$4cee0303,$ff9c4e5e,$60ffffff,$f8e6c02e
-	dc.l	$ff66edc0,$06086614,$082e0004,$ff6667ba
-	dc.l	$082e0001,$ff6267b2,$60000066,$04800000
-	dc.l	$00180c00,$00066614,$082e0003,$ff666600
-	dc.l	$004a082e,$0004ff66,$66000046,$2f0061ff
-	dc.l	$000007e0,$201f3d7b,$0222ff6e,$f22ed0c0
-	dc.l	$ffdcf22e,$9c00ff60,$4cee0303,$ff9cf36e
-	dc.l	$ff6c4e5e,$60ffffff,$f87ae000,$e006e004
-	dc.l	$e005e003,$e002e001,$e001303c,$000460bc
-	dc.l	$303c0003,$60b6e9ee,$0006ff42,$0c000011
-	dc.l	$67080c00,$00156750,$4e753028,$00000240
-	dc.l	$7fff0c40,$3f806708,$0c40407f,$672c4e75
-	dc.l	$02a87fff,$ffff0004,$671861ff,$000024cc
-	dc.l	$44400640,$3f810268,$80000000,$81680000
-	dc.l	$4e750268,$80000000,$4e750228,$007f0004
-	dc.l	$00687fff,$00004e75,$30280000,$02407fff
-	dc.l	$0c403c00,$67080c40,$43ff67de,$4e7502a8
-	dc.l	$7fffffff,$00046606,$4aa80008,$67c461ff
-	dc.l	$00002478,$44400640,$3c010268,$80000000
-	dc.l	$81680000,$4e75e9ee,$00c3ff42,$0c000003
-	dc.l	$670004a2,$0c000007,$6700049a,$02aeffff
-	dc.l	$00ffff64,$f23c9000,$00000000,$f23c8800
-	dc.l	$00000000,$302eff6c,$02407fff,$671041ee
-	dc.l	$ff6c61ff,$0000246c,$1d40ff4e,$60061d7c
-	dc.l	$0004ff4e,$4280102e,$ff6341ee,$ff6c2d56
-	dc.l	$ffd461ff,$0000292a,$102eff62,$66000086
-	dc.l	$2caeffd4,$082e0005,$00046626,$206effd8
-	dc.l	$4e60f22e,$d0c0ffdc,$f22e9c00,$ff604cee
-	dc.l	$0303ff9c,$4e5e0817,$0007667a,$60ffffff
-	dc.l	$f7220c2e,$0008ff4a,$66d8f22e,$f080ff6c
-	dc.l	$f22ed0c0,$ffdcf22e,$9c00ff60,$4cee0303
-	dc.l	$ff9c2c56,$2f6f00c4,$00b82f6f,$00c800bc
-	dc.l	$2f6f002c,$00c42f6f,$003000c8,$2f6f0034
-	dc.l	$00ccdffc,$000000b8,$08170007,$662860ff
-	dc.l	$fffff6d0,$c02eff66,$edc00608,$662a082e
-	dc.l	$0004ff66,$6700ff6a,$082e0001,$ff626700
-	dc.l	$ff606000,$01663f7c,$20240006,$f22fa400
-	dc.l	$000860ff,$fffff78e,$04800000,$0018303b
-	dc.l	$020a4efb,$00064afc,$00080000,$0000003a
-	dc.l	$00640094,$00000140,$0000f22e,$d0c0ffdc
-	dc.l	$f22e9c00,$ff604cee,$0303ff9c,$3d7c30d8
-	dc.l	$000a3d7c,$e006ff6e,$f36eff6c,$4e5e60ff
-	dc.l	$fffff6d4,$f22ed0c0,$ffdcf22e,$9c00ff60
-	dc.l	$4cee0303,$ff9c3d7c,$30d0000a,$3d7ce004
-	dc.l	$ff6ef36e,$ff6c4e5e,$60ffffff,$f694f22e
-	dc.l	$f040ff6c,$f22ed0c0,$ffdcf22e,$9c00ff60
-	dc.l	$4cee0303,$ff9c3d7c,$30d4000a,$3d7ce005
-	dc.l	$ff6ef36e,$ff6c4e5e,$60ffffff,$f60c2cae
-	dc.l	$ffd4082e,$00050004,$66000038,$206effd8
-	dc.l	$4e60f22e,$f040ff6c,$f22ed0c0,$ffdcf22e
-	dc.l	$9c00ff60,$4cee0303,$ff9c3d7c,$30cc000a
-	dc.l	$3d7ce003,$ff6ef36e,$ff6c4e5e,$60ffffff
-	dc.l	$f5de0c2e,$0008ff4a,$66c8f22e,$f080ff6c
-	dc.l	$f22ef040,$ff78f22e,$d0c0ffdc,$f22e9c00
-	dc.l	$ff604cee,$0303ff9c,$3d7c30cc,$000a3d7c
-	dc.l	$e003ff7a,$f36eff78,$2c562f6f,$00c400b8
-	dc.l	$2f6f00c8,$00bc2f6f,$00cc00c0,$2f6f002c
-	dc.l	$00c42f6f,$003000c8,$2f6f0034,$00ccdffc
-	dc.l	$000000b8,$60ffffff,$f576f22e,$f040ff6c
-	dc.l	$f22ed0c0,$ffdcf22e,$9c00ff60,$4cee0303
-	dc.l	$ff9c3d7c,$30c4000a,$3d7ce001,$ff6ef36e
-	dc.l	$ff6c4e5e,$60ffffff,$f55c02ae,$00ff00ff
-	dc.l	$ff64f23c,$90000000,$0000f23c,$88000000
-	dc.l	$000061ff,$00005548,$41eeff6c,$61ff0000
-	dc.l	$22721d40,$ff4ee9ee,$0183ff42,$082e0005
-	dc.l	$ff436728,$0c2e003a,$ff436720,$61ff0000
-	dc.l	$542a41ee,$ff7861ff,$00002248,$0c000006
-	dc.l	$660661ff,$000021ac,$1d40ff4f,$4280102e
-	dc.l	$ff63e9ee,$1047ff43,$41eeff6c,$43eeff78
-	dc.l	$223b1d30,$0000110c,$4ebb1930,$00001104
-	dc.l	$102eff62,$6600008a,$102eff43,$02000038
-	dc.l	$0c000038,$670ce9ee,$0183ff42,$61ff0000
-	dc.l	$545a082e,$00050004,$6600002a,$206effd8
-	dc.l	$4e60f22e,$d0c0ffdc,$f22e9c00,$ff604cee
-	dc.l	$0303ff9c,$4e5e0817,$00076600,$012660ff
-	dc.l	$fffff440,$082e0002,$ff4a67d6,$f22ed0c0
-	dc.l	$ffdcf22e,$9c00ff60,$4cee0303,$ff9c4e5e
-	dc.l	$2f6f0004,$00102f6f,$0000000c,$dffc0000
-	dc.l	$000c0817,$00076600,$00ea60ff,$fffff404
-	dc.l	$c02eff66,$edc00608,$6618082e,$0004ff66
-	dc.l	$6700ff66,$082e0001,$ff626700,$ff5c6000
-	dc.l	$006e0480,$00000018,$0c000006,$6d14082e
-	dc.l	$0003ff66,$66000060,$082e0004,$ff666600
-	dc.l	$004e082e,$00050004,$66000054,$206effd8
-	dc.l	$4e603d7b,$022aff6e,$f22ed0c0,$ffdcf22e
-	dc.l	$9c00ff60,$4cee0303,$ff9cf36e,$ff6c4e5e
-	dc.l	$08170007,$6600006c,$60ffffff,$f386e000
-	dc.l	$e006e004,$e005e003,$e002e001,$e001303c
-	dc.l	$00036000,$ffae303c,$00046000,$ffa6082e
-	dc.l	$0002ff4a,$67ac3d7b,$02d6ff6e,$f22ed0c0
-	dc.l	$ffdcf22e,$9c00ff60,$4cee0303,$ff9cf36e
-	dc.l	$ff6c4e5e,$2f6f0004,$00102f6f,$0000000c
-	dc.l	$dffc0000,$000c0817,$00076606,$60ffffff
-	dc.l	$f3223f7c,$20240006,$f22fa400,$000860ff
-	dc.l	$fffff402,$02aeffff,$00ffff64,$f23c9000
-	dc.l	$00000000,$f23c8800,$00000000,$e9ee0183
-	dc.l	$ff4261ff,$000051b4,$41eeff6c,$61ff0000
-	dc.l	$20620c00,$00066606,$61ff0000,$1fc61d40
-	dc.l	$ff4e4280,$102eff63,$41eeff6c,$2d56ffd4
-	dc.l	$61ff0000,$248c102e,$ff626600,$00842cae
-	dc.l	$ffd4082e,$00050004,$6628206e,$ffd84e60
-	dc.l	$f22ed0c0,$ffdcf22e,$9c00ff60,$4cee0303
-	dc.l	$ff9c4e5e,$08170007,$6600ff68,$60ffffff
-	dc.l	$f282082e,$0003ff4a,$67d6f22e,$d0c0ffdc
-	dc.l	$f22e9c00,$ff604cee,$0303ff9c,$2c562f6f
-	dc.l	$00c400b8,$2f6f00c8,$00bc2f6f,$003800c4
-	dc.l	$2f6f003c,$00c82f6f,$004000cc,$dffc0000
-	dc.l	$00b80817,$00076600,$ff1a60ff,$fffff234
-	dc.l	$c02eff66,$edc00608,$6700ff74,$2caeffd4
-	dc.l	$0c00001a,$6e0000e8,$67000072,$082e0005
-	dc.l	$0004660a,$206effd8,$4e606000,$fb8e0c2e
-	dc.l	$0008ff4a,$6600fb84,$f22ed0c0,$ffdcf22e
-	dc.l	$9c00ff60,$4cee0303,$ff9c3d7c,$30d8000a
-	dc.l	$3d7ce006,$ff6ef36e,$ff6c2c56,$2f6f00c4
-	dc.l	$00b82f6f,$00c800bc,$2f6f00cc,$00c02f6f
-	dc.l	$003800c4,$2f6f003c,$00c82f6f,$004000cc
-	dc.l	$dffc0000,$00b860ff,$fffff22c,$082e0005
-	dc.l	$00046600,$000c206e,$ffd84e60,$6000fb46
-	dc.l	$0c2e0008,$ff4a6600,$fb3cf22e,$d0c0ffdc
-	dc.l	$f22e9c00,$ff604cee,$0303ff9c,$3d7c30d0
-	dc.l	$000a3d7c,$e004ff6e,$f36eff6c,$2c562f6f
-	dc.l	$00c400b8,$2f6f00c8,$00bc2f6f,$00cc00c0
-	dc.l	$2f6f0038,$00c42f6f,$003c00c8,$2f6f0040
-	dc.l	$00ccdffc,$000000b8,$60ffffff,$f1a4082e
-	dc.l	$00050004,$6600000c,$206effd8,$4e606000
-	dc.l	$fbda0c2e,$0008ff4a,$6600fbd0,$f22ed0c0
-	dc.l	$ffdcf22e,$9c00ff60,$4cee0303,$ff9c3d7c
-	dc.l	$30c4000a,$3d7ce001,$ff6ef36e,$ff6c2c56
-	dc.l	$2f6f00c4,$00b82f6f,$00c800bc,$2f6f00cc
-	dc.l	$00c02f6f,$003800c4,$2f6f003c,$00c82f6f
-	dc.l	$004000cc,$dffc0000,$00b860ff,$fffff106
-	dc.l	$e9ee00c3,$ff420c00,$00016708,$0c000005
-	dc.l	$67344e75,$302eff6c,$02407fff,$67260c40
-	dc.l	$3f806e20,$44400640,$3f81222e,$ff70e0a9
-	dc.l	$08c1001f,$2d41ff70,$026e8000,$ff6c006e
-	dc.l	$3f80ff6c,$4e75302e,$ff6c0240,$7fff673a
-	dc.l	$0c403c00,$6e344a2e,$ff6c5bee,$ff6e3d40
-	dc.l	$ff6c4280,$41eeff6c,$323c3c01,$61ff0000
-	dc.l	$1a66303c,$3c004a2e,$ff6e6704,$08c0000f
-	dc.l	$08ee0007,$ff703d40,$ff6c4e75,$082e0005
-	dc.l	$000467ff,$fffff176,$2d680000,$ff782d68
-	dc.l	$0004ff7c,$2d680008,$ff804281,$4e752f00
-	dc.l	$4e7a0808,$08000001,$66000460,$201f4e56
-	dc.l	$ff4048ee,$0303ff9c,$f22ebc00,$ff60f22e
-	dc.l	$f0c0ffdc,$2d6e0006,$ff44206e,$ff4458ae
-	dc.l	$ff4461ff,$fffff152,$2d40ff40,$4a406b00
-	dc.l	$020e02ae,$00ff00ff,$ff640800,$000a6618
-	dc.l	$206eff44,$43eeff6c,$700c61ff,$fffff0d2
-	dc.l	$4a816600,$04926048,$206eff44,$43eeff6c
-	dc.l	$700c61ff,$fffff0ba,$4a816600,$047ae9ee
-	dc.l	$004fff6c,$0c407fff,$6726102e,$ff6f0200
-	dc.l	$000f660c,$4aaeff70,$66064aae,$ff746710
-	dc.l	$41eeff6c,$61ff0000,$501af22e,$f080ff6c
-	dc.l	$06ae0000,$000cff44,$41eeff6c,$61ff0000
-	dc.l	$1cd21d40,$ff4e0c00,$0006660a,$61ff0000
-	dc.l	$1c321d40,$ff4e422e,$ff53082e,$0005ff43
-	dc.l	$6748082e,$0004ff43,$662ce9ee,$0183ff42
-	dc.l	$61ff0000,$4e7641ee,$ff7861ff,$00001c94
-	dc.l	$1d40ff4f,$0c000006,$662061ff,$00001bf4
-	dc.l	$1d40ff4f,$6014082e,$0003ff43,$670c50ee
-	dc.l	$ff53082e,$0001ff43,$67c04280,$102eff63
-	dc.l	$122eff43,$0241007f,$f23c9000,$00000000
-	dc.l	$f23c8800,$00000000,$41eeff6c,$43eeff78
-	dc.l	$223b1530,$00000b2c,$4ebb1930,$00000b24
-	dc.l	$102eff62,$66404a2e,$ff53660c,$e9ee0183
-	dc.l	$ff4261ff,$00004e84,$2d6e0006,$ff682d6e
-	dc.l	$ff440006,$f22ed0c0,$ffdcf22e,$9c00ff60
-	dc.l	$4cee0303,$ff9c4e5e,$08170007,$66000096
-	dc.l	$60ffffff,$ee6ec02e,$ff66edc0,$06086612
-	dc.l	$082e0004,$ff6667ae,$082e0001,$ff6267ac
-	dc.l	$60340480,$00000018,$0c000006,$6610082e
-	dc.l	$0004ff66,$6620082e,$0003ff66,$66203d7b
-	dc.l	$0206ff6e,$601ee002,$e006e004,$e005e003
-	dc.l	$e002e001,$e0013d7c,$e005ff6e,$60063d7c
-	dc.l	$e003ff6e,$2d6e0006,$ff682d6e,$ff440006
-	dc.l	$f22ed0c0,$ffdcf22e,$9c00ff60,$4cee0303
-	dc.l	$ff9cf36e,$ff6c4e5e,$08170007,$660660ff
-	dc.l	$ffffede0,$2f173f6f,$00080004,$3f7c2024
-	dc.l	$0006f22f,$a4000008,$60ffffff,$eeb80800
-	dc.l	$000e6700,$01c2082e,$00050004,$66164e68
-	dc.l	$2d48ffd8,$61ff0000,$0bce206e,$ffd84e60
-	dc.l	$600001aa,$422eff4a,$41ee000c,$2d48ffd8
-	dc.l	$61ff0000,$0bb20c2e,$0008ff4a,$67000086
-	dc.l	$0c2e0004,$ff4a6600,$0184082e,$00070004
-	dc.l	$66363dae,$00040804,$2daeff44,$08063dbc
-	dc.l	$00f0080a,$41f60804,$2d480004,$f22ed0c0
-	dc.l	$ffdcf22e,$9c00ff60,$4cee0303,$ff9c4e5e
-	dc.l	$2e5f60ff,$ffffed3c,$3dae0004,$08002dae
-	dc.l	$ff440802,$3dbc2024,$08062dae,$00060808
-	dc.l	$41f60800,$2d480004,$f22ed0c0,$ffdcf22e
-	dc.l	$9c00ff60,$4cee0303,$ff9c4e5e,$2e5f60ff
-	dc.l	$ffffedf2,$1d41000a,$1d40000b,$f22ed0c0
-	dc.l	$ffdcf22e,$9c00ff60,$4cee0303,$ff9c2f16
-	dc.l	$2f002f01,$2f2eff44,$4280102e,$000b4480
-	dc.l	$082e0007,$0004671c,$3dae0004,$08002dae
-	dc.l	$00060808,$2d9f0802,$3dbc2024,$08064876
-	dc.l	$08006014,$3dae0004,$08042d9f,$08063dbc
-	dc.l	$00f0080a,$48760804,$4281122e,$000a4a01
-	dc.l	$6a0cf236,$f080080c,$06800000,$000ce309
-	dc.l	$6a0cf236,$f040080c,$06800000,$000ce309
-	dc.l	$6a0cf236,$f020080c,$06800000,$000ce309
-	dc.l	$6a0cf236,$f010080c,$06800000,$000ce309
-	dc.l	$6a0cf236,$f008080c,$06800000,$000ce309
-	dc.l	$6a0cf236,$f004080c,$06800000,$000ce309
-	dc.l	$6a0cf236,$f002080c,$06800000,$000ce309
-	dc.l	$6a06f236,$f001080c,$222f0004,$202f0008
-	dc.l	$2c6f000c,$2e5f0817,$000767ff,$ffffec04
-	dc.l	$60ffffff,$ecf061ff,$00001244,$f22ed0c0
-	dc.l	$ffdcf22e,$9c00ff60,$4cee0303,$ff9c082e
-	dc.l	$00070004,$660e2d6e,$ff440006,$4e5e60ff
-	dc.l	$ffffebd0,$2c563f6f,$00c400c0,$2f6f00c6
-	dc.l	$00c82f6f,$000400c2,$3f7c2024,$00c6dffc
-	dc.l	$000000c0,$60ffffff,$ec9c201f,$4e56ff40
-	dc.l	$48ee0303,$ff9c2d6e,$0006ff44,$206eff44
-	dc.l	$58aeff44,$61ffffff,$ed002d40,$ff404a40
-	dc.l	$6b047010,$60260800,$000e6610,$e9c014c3
-	dc.l	$700c0c01,$00076614,$58806010,$428061ff
-	dc.l	$00000ce6,$202eff44,$90ae0006,$3d40000a
-	dc.l	$4cee0303,$ff9c4e5e,$518f2f00,$3f6f000c
-	dc.l	$00042f6f,$000e0006,$4280302f,$00122f6f
-	dc.l	$00060010,$d1af0006,$3f7c402c,$000a201f
-	dc.l	$60ffffff,$ebe44e7a,$08080800,$0001660c
-	dc.l	$f22e9c00,$ff60f22e,$d0c0ffdc,$4cee0303
-	dc.l	$ff9c4e5e,$514f2eaf,$00083f6f,$000c0004
-	dc.l	$3f7c4008,$00062f6f,$00020008,$2f7c0942
-	dc.l	$8001000c,$08170005,$670608ef,$0002000d
-	dc.l	$60ffffff,$ebd64fee,$ff404e7a,$18080801
-	dc.l	$0001660c,$f22ed0c0,$ffdcf22f,$9c000020
-	dc.l	$2c562f6f,$00c400bc,$3f6f00c8,$00c03f7c
-	dc.l	$400800c2,$2f4800c4,$3f4000c8,$3f7c0001
-	dc.l	$00ca4cef,$0303005c,$defc00bc,$60a64e56
-	dc.l	$ff40f32e,$ff6c48ee,$0303ff9c,$f22ebc00
-	dc.l	$ff60f22e,$f0c0ffdc,$2d6eff68,$ff44206e
-	dc.l	$ff4458ae,$ff4461ff,$ffffebce,$2d40ff40
-	dc.l	$0800000d,$662841ee,$ff6c61ff,$fffff1ea
-	dc.l	$f22ed0c0,$ffdcf22e,$9c00ff60,$4cee0303
-	dc.l	$ff9cf36e,$ff6c4e5e,$60ffffff,$ea94322e
-	dc.l	$ff6c0241,$7fff0c41,$7fff661a,$4aaeff74
-	dc.l	$660c222e,$ff700281,$7fffffff,$67082d6e
-	dc.l	$ff70ff54,$6012223c,$7fffffff,$4a2eff6c
-	dc.l	$6a025281,$2d41ff54,$e9c004c3,$122eff41
-	dc.l	$307b0206,$4efb8802,$006c0000,$0000ff98
-	dc.l	$003e0000,$00100000,$102eff54,$0c010007
-	dc.l	$6f16206e,$000c61ff,$ffffeb86,$4a8166ff
-	dc.l	$00005436,$6000ff6a,$02410007,$61ff0000
-	dc.l	$478e6000,$ff5c302e,$ff540c01,$00076f16
-	dc.l	$206e000c,$61ffffff,$eb6e4a81,$66ff0000
-	dc.l	$54166000,$ff3c0241,$000761ff,$00004724
-	dc.l	$6000ff2e,$202eff54,$0c010007,$6f16206e
-	dc.l	$000c61ff,$ffffeb56,$4a8166ff,$000053f6
-	dc.l	$6000ff0e,$02410007,$61ff0000,$46ba6000
-	dc.l	$ff004e56,$ff40f32e,$ff6c48ee,$0303ff9c
-	dc.l	$f22ebc00,$ff60f22e,$f0c0ffdc,$2d6eff68
-	dc.l	$ff44206e,$ff4458ae,$ff4461ff,$ffffea8a
-	dc.l	$2d40ff40,$0800000d,$6600002a,$41eeff6c
-	dc.l	$61ffffff,$f0a4f22e,$d0c0ffdc,$f22e9c00
-	dc.l	$ff604cee,$0303ff9c,$f36eff6c,$4e5e60ff
-	dc.l	$ffffe964,$e9c004c3,$122eff41,$307b0206
-	dc.l	$4efb8802,$007400a6,$015a0000,$00420104
-	dc.l	$00100000,$102eff70,$08c00006,$0c010007
-	dc.l	$6f16206e,$000c61ff,$ffffea76,$4a8166ff
-	dc.l	$00005326,$6000ffa0,$02410007,$61ff0000
-	dc.l	$467e6000,$ff92302e,$ff7008c0,$000e0c01
-	dc.l	$00076f16,$206e000c,$61ffffff,$ea5a4a81
-	dc.l	$66ff0000,$53026000,$ff6e0241,$000761ff
-	dc.l	$00004610,$6000ff60,$202eff70,$08c0001e
-	dc.l	$0c010007,$6f16206e,$000c61ff,$ffffea3e
-	dc.l	$4a8166ff,$000052de,$6000ff3c,$02410007
-	dc.l	$61ff0000,$45a26000,$ff2e0c01,$00076f2e
-	dc.l	$202eff6c,$02808000,$00000080,$7fc00000
-	dc.l	$222eff70,$e0898081,$206e000c,$61ffffff
-	dc.l	$e9fc4a81,$66ff0000,$529c6000,$fefa202e
-	dc.l	$ff6c0280,$80000000,$00807fc0,$00002f01
-	dc.l	$222eff70,$e0898081,$221f0241,$000761ff
-	dc.l	$00004544,$6000fed0,$202eff6c,$02808000
-	dc.l	$00000080,$7ff80000,$222eff70,$2d40ff84
-	dc.l	$700be0a9,$83aeff84,$222eff70,$02810000
-	dc.l	$07ffe0b9,$2d41ff88,$222eff74,$e0a983ae
-	dc.l	$ff8841ee,$ff84226e,$000c7008,$61ffffff
-	dc.l	$e8cc4a81,$66ff0000,$522a6000,$fe7a422e
-	dc.l	$ff4a3d6e,$ff6cff84,$426eff86,$202eff70
-	dc.l	$08c0001e,$2d40ff88,$2d6eff74,$ff8c082e
-	dc.l	$00050004,$66384e68,$2d48ffd8,$2d56ffd4
-	dc.l	$61ff0000,$02c22248,$2d48000c,$206effd8
-	dc.l	$4e602cae,$ffd441ee,$ff84700c,$61ffffff
-	dc.l	$e86c4a81,$66ff0000,$51d86000,$fe1a2d56
-	dc.l	$ffd461ff,$00000290,$22482d48,$000c2cae
-	dc.l	$ffd40c2e,$0008ff4a,$66ccf22e,$d0c0ffdc
-	dc.l	$f22e9c00,$ff604cee,$0303ff9c,$f36eff6c
-	dc.l	$2c6effd4,$2f6f00c4,$00b82f6f,$00c800bc
-	dc.l	$2f6f00cc,$00c02f6f,$004400c4,$2f6f0048
-	dc.l	$00c82f6f,$004c00cc,$dffc0000,$00b860ff
-	dc.l	$ffffe734,$4e56ff40,$f32eff6c,$48ee0303
-	dc.l	$ff9cf22e,$bc00ff60,$f22ef0c0,$ffdc2d6e
-	dc.l	$ff68ff44,$206eff44,$58aeff44,$61ffffff
-	dc.l	$e7f82d40,$ff400800,$000d6600,$0106e9c0
-	dc.l	$04c36622,$0c6e401e,$ff6c661a,$f23c9000
-	dc.l	$00000000,$f22e4000,$ff70f22e,$6800ff6c
-	dc.l	$3d7ce001,$ff6e41ee,$ff6c61ff,$ffffedea
-	dc.l	$02ae00ff,$01ffff64,$f23c9000,$00000000
-	dc.l	$f23c8800,$00000000,$e9ee1006,$ff420c01
-	dc.l	$00176700,$009641ee,$ff6c61ff,$00001394
-	dc.l	$1d40ff4e,$082e0005,$ff43672e,$082e0004
-	dc.l	$ff436626,$e9ee0183,$ff4261ff,$0000454c
-	dc.l	$41eeff78,$61ff0000,$136a0c00,$00066606
-	dc.l	$61ff0000,$12ce1d40,$ff4f4280,$102eff63
-	dc.l	$122eff43,$0241007f,$41eeff6c,$43eeff78
-	dc.l	$223b1530,$0000022c,$4ebb1930,$00000224
-	dc.l	$e9ee0183,$ff4261ff,$00004590,$f22ed0c0
-	dc.l	$ffdcf22e,$9c00ff60,$4cee0303,$ff9cf36e
-	dc.l	$ff6c4e5e,$60ffffff,$e5cc4280,$102eff63
-	dc.l	$122eff43,$02810000,$007f61ff,$00000396
-	dc.l	$60be1d7c,$0000ff4e,$4280102e,$ff6302ae
-	dc.l	$ffff00ff,$ff6441ee,$ff6c61ff,$00001722
-	dc.l	$60aa4e56,$ff40f32e,$ff6c48ee,$0303ff9c
-	dc.l	$f22ebc00,$ff60f22e,$f0c0ffdc,$2d6eff68
-	dc.l	$ff44206e,$ff4458ae,$ff4461ff,$ffffe69a
-	dc.l	$2d40ff40,$41eeff6c,$61ffffff,$ecbcf22e
-	dc.l	$d0c0ffdc,$f22e9c00,$ff604cee,$0303ff9c
-	dc.l	$f36eff6c,$4e5e60ff,$ffffe592,$0c6f402c
-	dc.l	$000667ff,$ffffe5b2,$60ffffff,$e5962040
-	dc.l	$102eff41,$22000240,$00380281,$00000007
-	dc.l	$0c000018,$67240c00,$0020672c,$80410c00
-	dc.l	$003c6706,$206e000c,$4e751d7c,$0080ff4a
-	dc.l	$41f60162,$ff680004,$4e752008,$61ff0000
-	dc.l	$42ca206e,$000c4e75,$200861ff,$0000430c
-	dc.l	$206e000c,$0c00000c,$67024e75,$51882d48
-	dc.l	$000c4e75,$102eff41,$22000240,$00380281
-	dc.l	$00000007,$0c000018,$670e0c00,$00206700
-	dc.l	$0076206e,$000c4e75,$323b120e,$206e000c
-	dc.l	$4efb1006,$4afc0008,$0010001a,$0024002c
-	dc.l	$0034003c,$0044004e,$06ae0000,$000cffa4
-	dc.l	$4e7506ae,$0000000c,$ffa84e75,$d5fc0000
-	dc.l	$000c4e75,$d7fc0000,$000c4e75,$d9fc0000
-	dc.l	$000c4e75,$dbfc0000,$000c4e75,$06ae0000
-	dc.l	$000cffd4,$4e751d7c,$0004ff4a,$06ae0000
-	dc.l	$000cffd8,$4e75323b,$1214206e,$000c5188
-	dc.l	$51ae000c,$4efb1006,$4afc0008,$00100016
-	dc.l	$001c0020,$00240028,$002c0032,$2d48ffa4
-	dc.l	$4e752d48,$ffa84e75,$24484e75,$26484e75
-	dc.l	$28484e75,$2a484e75,$2d48ffd4,$4e752d48
-	dc.l	$ffd81d7c,$0008ff4a,$4e754afc,$006d0000
-	dc.l	$20700000,$2a660000,$00000000,$2b0a0000
-	dc.l	$3db20000,$00000000,$00000000,$00000000
-	dc.l	$00000000,$00000000,$00000000,$00000000
-	dc.l	$00000000,$00000000,$00000000,$00000000
-	dc.l	$00000000,$00000000,$00000000,$00000000
-	dc.l	$00000000,$00000000,$00000000,$00000000
-	dc.l	$2bb00000,$00000000,$27460000,$00000000
-	dc.l	$00000000,$00000000,$00000000,$00000000
-	dc.l	$233c0000,$00000000,$36220000,$1c7c0000
-	dc.l	$32f20000,$00000000,$00000000,$2fb00000
-	dc.l	$39ea0000,$00000000,$00000000,$00000000
-	dc.l	$00000000,$00000000,$00000000,$00000000
-	dc.l	$00000000,$00000000,$00000000,$00000000
-	dc.l	$00000000,$00000000,$00000000,$00000000
-	dc.l	$2e4e0000,$00000000,$29f40000,$00000000
-	dc.l	$00000000,$00000000,$00000000,$00000000
-	dc.l	$205e0000,$3da00000,$00000000,$00000000
-	dc.l	$20680000,$3daa0000,$00000000,$00000000
-	dc.l	$00000000,$00000000,$00000000,$00000000
-	dc.l	$00000000,$00000000,$00000000,$00000000
-	dc.l	$00000000,$00000000,$00000000,$00000000
-	dc.l	$00000000,$00000000,$00000000,$00000000
-	dc.l	$2b9e0000,$00000000,$27340000,$00000000
-	dc.l	$2ba80000,$00000000,$273e0000,$00000000
-	dc.l	$232a0000,$00000000,$36100000,$1c6a0000
-	dc.l	$23340000,$00000000,$361a0000,$1c740000
-	dc.l	$39d80000,$00000000,$00000000,$00000000
-	dc.l	$39e260fe,$122eff43,$02410070,$e80961ff
-	dc.l	$00003ed2,$02800000,$00ff2f00,$103b0920
-	dc.l	$01482f00,$61ff0000,$0340201f,$221f6700
-	dc.l	$0134082e,$0005ff42,$670000b8,$082e0004
-	dc.l	$ff426600,$001a123b,$1120021e,$082e0005
-	dc.l	$0004670a,$0c2e0008,$ff4a6602,$4e752248
-	dc.l	$9fc041d7,$4a016a0c,$20eeffdc,$20eeffe0
-	dc.l	$20eeffe4,$e3096a0c,$20eeffe8,$20eeffec
-	dc.l	$20eefff0,$e3096a0a,$f210f020,$d1fc0000
-	dc.l	$000ce309,$6a0af210,$f010d1fc,$0000000c
-	dc.l	$e3096a0a,$f210f008,$d1fc0000,$000ce309
-	dc.l	$6a0af210,$f004d1fc,$0000000c,$e3096a0a
-	dc.l	$f210f002,$d1fc0000,$000ce309,$6a0af210
-	dc.l	$f001d1fc,$0000000c,$2d49ff54,$41d72f00
-	dc.l	$61ffffff,$e248201f,$dfc04a81,$6600071e
-	dc.l	$4e752d48,$ff549fc0,$43d72f01,$2f0061ff
-	dc.l	$ffffe214,$201f4a81,$6600070e,$221f41d7
-	dc.l	$4a016a0c,$2d58ffdc,$2d58ffe0,$2d58ffe4
-	dc.l	$e3096a0c,$2d58ffe8,$2d58ffec,$2d58fff0
-	dc.l	$e3096a04,$f218d020,$e3096a04,$f218d010
-	dc.l	$e3096a04,$f218d008,$e3096a04,$f218d004
-	dc.l	$e3096a04,$f218d002,$e3096a04,$f218d001
-	dc.l	$dfc04e75,$4e75000c,$0c180c18,$18240c18
-	dc.l	$18241824,$24300c18,$18241824,$24301824
-	dc.l	$24302430,$303c0c18,$18241824,$24301824
-	dc.l	$24302430,$303c1824,$24302430,$303c2430
-	dc.l	$303c303c,$3c480c18,$18241824,$24301824
-	dc.l	$24302430,$303c1824,$24302430,$303c2430
-	dc.l	$303c303c,$3c481824,$24302430,$303c2430
-	dc.l	$303c303c,$3c482430,$303c303c,$3c48303c
-	dc.l	$3c483c48,$48540c18,$18241824,$24301824
-	dc.l	$24302430,$303c1824,$24302430,$303c2430
-	dc.l	$303c303c,$3c481824,$24302430,$303c2430
-	dc.l	$303c303c,$3c482430,$303c303c,$3c48303c
-	dc.l	$3c483c48,$48541824,$24302430,$303c2430
-	dc.l	$303c303c,$3c482430,$303c303c,$3c48303c
-	dc.l	$3c483c48,$48542430,$303c303c,$3c48303c
-	dc.l	$3c483c48,$4854303c,$3c483c48,$48543c48
-	dc.l	$48544854,$54600080,$40c020a0,$60e01090
-	dc.l	$50d030b0,$70f00888,$48c828a8,$68e81898
-	dc.l	$58d838b8,$78f80484,$44c424a4,$64e41494
-	dc.l	$54d434b4,$74f40c8c,$4ccc2cac,$6cec1c9c
-	dc.l	$5cdc3cbc,$7cfc0282,$42c222a2,$62e21292
-	dc.l	$52d232b2,$72f20a8a,$4aca2aaa,$6aea1a9a
-	dc.l	$5ada3aba,$7afa0686,$46c626a6,$66e61696
-	dc.l	$56d636b6,$76f60e8e,$4ece2eae,$6eee1e9e
-	dc.l	$5ede3ebe,$7efe0181,$41c121a1,$61e11191
-	dc.l	$51d131b1,$71f10989,$49c929a9,$69e91999
-	dc.l	$59d939b9,$79f90585,$45c525a5,$65e51595
-	dc.l	$55d535b5,$75f50d8d,$4dcd2dad,$6ded1d9d
-	dc.l	$5ddd3dbd,$7dfd0383,$43c323a3,$63e31393
-	dc.l	$53d333b3,$73f30b8b,$4bcb2bab,$6beb1b9b
-	dc.l	$5bdb3bbb,$7bfb0787,$47c727a7,$67e71797
-	dc.l	$57d737b7,$77f70f8f,$4fcf2faf,$6fef1f9f
-	dc.l	$5fdf3fbf,$7fff2040,$302eff40,$32000240
-	dc.l	$003f0281,$00000007,$303b020a,$4efb0006
-	dc.l	$4afc0040,$00000000,$00000000,$00000000
-	dc.l	$00000000,$00000000,$00000000,$00000000
-	dc.l	$00000000,$00800086,$008c0090,$00940098
-	dc.l	$009c00a0,$00a600b6,$00c600d2,$00de00ea
-	dc.l	$00f60102,$01180126,$0134013e,$01480152
-	dc.l	$015c0166,$017a0198,$01b601d2,$01ee020a
-	dc.l	$02260242,$02600260,$02600260,$02600260
-	dc.l	$02600260,$02c002da,$02f40314,$00000000
-	dc.l	$00000000,$206effa4,$4e75206e,$ffa84e75
-	dc.l	$204a4e75,$204b4e75,$204c4e75,$204d4e75
-	dc.l	$20564e75,$206effd8,$4e75202e,$ffa42200
-	dc.l	$d2882d41,$ffa42040,$4e75202e,$ffa82200
-	dc.l	$d2882d41,$ffa82040,$4e75200a,$2200d288
-	dc.l	$24412040,$4e75200b,$2200d288,$26412040
-	dc.l	$4e75200c,$2200d288,$28412040,$4e75200d
-	dc.l	$2200d288,$2a412040,$4e752016,$2200d288
-	dc.l	$2c812040,$4e751d7c,$0004ff4a,$202effd8
-	dc.l	$2200d288,$2d41ffd8,$20404e75,$202effa4
-	dc.l	$90882d40,$ffa42040,$4e75202e,$ffa89088
-	dc.l	$2d40ffa8,$20404e75,$200a9088,$24402040
-	dc.l	$4e75200b,$90882640,$20404e75,$200c9088
-	dc.l	$28402040,$4e75200d,$90882a40,$20404e75
-	dc.l	$20169088,$2c802040,$4e751d7c,$0008ff4a
-	dc.l	$202effd8,$90882d40,$ffd82040,$4e75206e
-	dc.l	$ff4454ae,$ff4461ff,$ffffde38,$4a8166ff
-	dc.l	$fffff1b6,$3040d1ee,$ffa44e75,$206eff44
-	dc.l	$54aeff44,$61ffffff,$de1a4a81,$66ffffff
-	dc.l	$f1983040,$d1eeffa8,$4e75206e,$ff4454ae
-	dc.l	$ff4461ff,$ffffddfc,$4a8166ff,$fffff17a
-	dc.l	$3040d1ca,$4e75206e,$ff4454ae,$ff4461ff
-	dc.l	$ffffdde0,$4a8166ff,$fffff15e,$3040d1cb
-	dc.l	$4e75206e,$ff4454ae,$ff4461ff,$ffffddc4
-	dc.l	$4a8166ff,$fffff142,$3040d1cc,$4e75206e
-	dc.l	$ff4454ae,$ff4461ff,$ffffdda8,$4a8166ff
-	dc.l	$fffff126,$3040d1cd,$4e75206e,$ff4454ae
-	dc.l	$ff4461ff,$ffffdd8c,$4a8166ff,$fffff10a
-	dc.l	$3040d1d6,$4e75206e,$ff4454ae,$ff4461ff
-	dc.l	$ffffdd70,$4a8166ff,$fffff0ee,$3040d1ee
-	dc.l	$ffd84e75,$508161ff,$000038fa,$2f00206e
-	dc.l	$ff4454ae,$ff4461ff,$ffffdd48,$4a8166ff
-	dc.l	$fffff0c6,$205f0800,$00086600,$00e62d40
-	dc.l	$ff542200,$e9590241,$000f61ff,$000038c6
-	dc.l	$2f02242e,$ff540802,$000b6602,$48c02202
-	dc.l	$ef590281,$00000003,$e3a849c2,$d082d1c0
-	dc.l	$241f4e75,$206eff44,$54aeff44,$61ffffff
-	dc.l	$dcf24a81,$66ffffff,$f0703040,$4e75206e
-	dc.l	$ff4458ae,$ff4461ff,$ffffdcee,$4a8166ff
-	dc.l	$fffff056,$20404e75,$206eff44,$54aeff44
-	dc.l	$61ffffff,$dcbe4a81,$66ffffff,$f03c3040
-	dc.l	$d1eeff44,$55884e75,$206eff44,$54aeff44
-	dc.l	$61ffffff,$dc9e4a81,$66ffffff,$f01c206e
-	dc.l	$ff445588,$08000008,$66000038,$2d40ff54
-	dc.l	$2200e959,$0241000f,$61ff0000,$38182f02
-	dc.l	$242eff54,$0802000b,$660248c0,$2202ef59
-	dc.l	$02810000,$0003e3a8,$49c2d082,$d1c0241f
-	dc.l	$4e750800,$0006670c,$48e73c00,$2a002608
-	dc.l	$42826028,$2d40ff54,$e9c01404,$61ff0000
-	dc.l	$37d448e7,$3c002400,$2a2eff54,$26080805
-	dc.l	$000b6602,$48c2e9c5,$0542e1aa,$08050007
-	dc.l	$67024283,$e9c50682,$0c000002,$6d346718
-	dc.l	$206eff44,$58aeff44,$61ffffff,$dc0c4a81
-	dc.l	$66ff0000,$00b06018,$206eff44,$54aeff44
-	dc.l	$61ffffff,$dbde4a81,$66ff0000,$009848c0
-	dc.l	$d680e9c5,$07826700,$006e0c00,$00026d34
-	dc.l	$6718206e,$ff4458ae,$ff4461ff,$ffffdbca
-	dc.l	$4a8166ff,$0000006e,$601c206e,$ff4454ae
-	dc.l	$ff4461ff,$ffffdb9c,$4a8166ff,$00000056
-	dc.l	$48c06002,$42802800,$08050002,$67142043
-	dc.l	$61ffffff,$dbd64a81,$66000028,$d082d084
-	dc.l	$6018d682,$204361ff,$ffffdbc0,$4a816600
-	dc.l	$0012d084,$6004d682,$20032040,$4cdf003c
-	dc.l	$4e752043,$4cdf003c,$303c0101,$60ffffff
-	dc.l	$ef184cdf,$003c60ff,$ffffeebe,$61ff0000
-	dc.l	$44ea303c,$00e1600a,$61ff0000,$44de303c
-	dc.l	$0161206e,$ff5460ff,$ffffeeee,$102eff42
-	dc.l	$0c00009c,$670000b2,$0c000098,$67000074
-	dc.l	$0c000094,$6736206e,$ff4458ae,$ff4461ff
-	dc.l	$ffffdb06,$4a8166ff,$ffffee6e,$2d40ff64
-	dc.l	$206eff44,$58aeff44,$61ffffff,$daec4a81
-	dc.l	$66ffffff,$ee542d40,$ff684e75,$206eff44
-	dc.l	$58aeff44,$61ffffff,$dad04a81,$66ffffff
-	dc.l	$ee382d40,$ff60206e,$ff4458ae,$ff4461ff
-	dc.l	$ffffdab6,$4a8166ff,$ffffee1e,$2d40ff68
-	dc.l	$4e75206e,$ff4458ae,$ff4461ff,$ffffda9a
-	dc.l	$4a8166ff,$ffffee02,$2d40ff60,$206eff44
-	dc.l	$58aeff44,$61ffffff,$da804a81,$66ffffff
-	dc.l	$ede82d40,$ff644e75,$206eff44,$58aeff44
-	dc.l	$61ffffff,$da644a81,$66ffffff,$edcc2d40
-	dc.l	$ff60206e,$ff4458ae,$ff4461ff,$ffffda4a
-	dc.l	$4a8166ff,$ffffedb2,$2d40ff64,$206eff44
-	dc.l	$58aeff44,$61ffffff,$da304a81,$66ffffff
-	dc.l	$ed982d40,$ff684e75,$2d680004,$ff882d69
-	dc.l	$0004ff94,$2d680008,$ff8c2d69,$0008ff98
-	dc.l	$30280000,$32290000,$3d40ff84,$3d41ff90
-	dc.l	$02407fff,$02417fff,$3d40ff54,$3d41ff56
-	dc.l	$b0416cff,$0000005c,$61ff0000,$015a2f00
-	dc.l	$0c2e0004,$ff4e6610,$41eeff84,$61ff0000
-	dc.l	$04fa4440,$3d40ff54,$302eff56,$04400042
-	dc.l	$b06eff54,$6c1a302e,$ff54d06f,$0002322e
-	dc.l	$ff840241,$80008041,$3d40ff84,$201f4e75
-	dc.l	$026e8000,$ff8408ee,$0000ff85,$201f4e75
-	dc.l	$61ff0000,$00562f00,$0c2e0004,$ff4f6610
-	dc.l	$41eeff90,$61ff0000,$04a24440,$3d40ff56
-	dc.l	$302eff54,$04400042,$b06eff56,$6c1a302e
-	dc.l	$ff56d06f,$0002322e,$ff900241,$80008041
-	dc.l	$3d40ff90,$201f4e75,$026e8000,$ff9008ee
-	dc.l	$0000ff91,$201f4e75,$322eff84,$30010281
-	dc.l	$00007fff,$02408000,$00403fff,$3d40ff84
-	dc.l	$0c2e0004,$ff4e670a,$203c0000,$3fff9081
-	dc.l	$4e7541ee,$ff8461ff,$00000430,$44802200
-	dc.l	$60e60c2e,$0004ff4e,$673a322e,$ff840281
-	dc.l	$00007fff,$026e8000,$ff840801,$00006712
-	dc.l	$006e3fff,$ff84203c,$00003fff,$9081e280
-	dc.l	$4e75006e,$3ffeff84,$203c0000,$3ffe9081
-	dc.l	$e2804e75,$41eeff84,$61ff0000,$03de0800
-	dc.l	$00006710,$006e3fff,$ff840680,$00003fff
-	dc.l	$e2804e75,$006e3ffe,$ff840680,$00003ffe
-	dc.l	$e2804e75,$322eff90,$30010281,$00007fff
-	dc.l	$02408000,$00403fff,$3d40ff90,$0c2e0004
-	dc.l	$ff4f670a,$203c0000,$3fff9081,$4e7541ee
-	dc.l	$ff9061ff,$00000384,$44802200,$60e60c2e
-	dc.l	$0005ff4f,$67320c2e,$0003ff4f,$673e0c2e
-	dc.l	$0003ff4e,$671408ee,$0006ff70,$00ae0100
-	dc.l	$4080ff64,$41eeff6c,$604200ae,$01000000
-	dc.l	$ff6441ee,$ff6c6034,$00ae0100,$4080ff64
-	dc.l	$08ee0006,$ff7c41ee,$ff786020,$41eeff78
-	dc.l	$0c2e0005,$ff4e66ff,$0000000c,$00ae0000
-	dc.l	$4080ff64,$00ae0100,$0000ff64,$08280007
-	dc.l	$00006708,$00ae0800,$0000ff64,$f210d080
-	dc.l	$4e7500ae,$01002080,$ff64f23b,$d0800170
-	dc.l	$00000008,$4e757fff,$0000ffff,$ffffffff
-	dc.l	$ffff0000,$3f813c01,$e408323b,$02f63001
-	dc.l	$90680000,$0c400042,$6a164280,$082e0001
-	dc.l	$ff666704,$08c0001d,$61ff0000,$001a4e75
-	dc.l	$203c2000,$00003141,$000042a8,$000442a8
-	dc.l	$00084e75,$2d680008,$ff542d40,$ff582001
-	dc.l	$92680000,$6f100c41,$00206d10,$0c410040
-	dc.l	$6d506000,$009a202e,$ff584e75,$2f023140
-	dc.l	$00007020,$90410c41,$001d6d08,$142eff58
-	dc.l	$852eff57,$e9e82020,$0004e9e8,$18000004
-	dc.l	$e9ee0800,$ff542142,$00042141,$0008e8c0
-	dc.l	$009e6704,$08c0001d,$0280e000,$0000241f
-	dc.l	$4e752f02,$31400000,$04410020,$70209041
-	dc.l	$142eff58,$852eff57,$e9e82020,$0004e9e8
-	dc.l	$18000004,$e8c1009e,$660ce8ee,$081fff54
-	dc.l	$66042001,$60062001,$08c0001d,$42a80004
-	dc.l	$21420008,$0280e000,$0000241f,$4e753140
-	dc.l	$00000c41,$00416d12,$672442a8,$000442a8
-	dc.l	$0008203c,$20000000,$4e752028,$00042200
-	dc.l	$0280c000,$00000281,$3fffffff,$60122028
-	dc.l	$00040280,$80000000,$e2880281,$7fffffff
-	dc.l	$66164aa8,$00086610,$4a2eff58,$660a42a8
-	dc.l	$000442a8,$00084e75,$08c0001d,$42a80004
-	dc.l	$42a80008,$4e7561ff,$00000110,$4a806700
-	dc.l	$00fa006e,$0208ff66,$327b1206,$4efb9802
-	dc.l	$004000ea,$00240008,$4a280002,$6b0000dc
-	dc.l	$70ff4841,$0c010004,$6700003e,$6e000094
-	dc.l	$60000064,$4a280002,$6a0000c0,$70ff4841
-	dc.l	$0c010004,$67000022,$6e000078,$60000048
-	dc.l	$e3806400,$00a64841,$0c010004,$6700000a
-	dc.l	$6e000060,$60000030,$06a80000,$01000004
-	dc.l	$640ce4e8,$0004e4e8,$00065268,$00004a80
-	dc.l	$66060268,$fe000006,$02a8ffff,$ff000004
-	dc.l	$42a80008,$4e7552a8,$0008641a,$52a80004
-	dc.l	$6414e4e8,$0004e4e8,$0006e4e8,$0008e4e8
-	dc.l	$000a5268,$00004a80,$66060228,$00fe000b
-	dc.l	$4e7506a8,$00000800,$0008641a,$52a80004
-	dc.l	$6414e4e8,$0004e4e8,$0006e4e8,$0008e4e8
-	dc.l	$000a5268,$00004a80,$66060268,$f000000a
-	dc.l	$02a8ffff,$f8000008,$4e754841,$0c010004
-	dc.l	$6700ff86,$6eea4e75,$48414a01,$66044841
-	dc.l	$4e7548e7,$30000c01,$00046622,$e9e83602
-	dc.l	$0004741e,$e5ab2428,$00040282,$0000003f
-	dc.l	$66284aa8,$00086622,$4a80661e,$6020e9e8
-	dc.l	$35420008,$741ee5ab,$24280008,$02820000
-	dc.l	$01ff6606,$4a806602,$600408c3,$001d2003
-	dc.l	$4cdf000c,$48414e75,$2f022f03,$20280004
-	dc.l	$22280008,$edc02000,$671ae5a8,$e9c13022
-	dc.l	$8083e5a9,$21400004,$21410008,$2002261f
-	dc.l	$241f4e75,$edc12000,$e5a90682,$00000020
-	dc.l	$21410004,$42a80008,$2002261f,$241f4e75
-	dc.l	$ede80000,$0004660e,$ede80000,$00086700
-	dc.l	$00740640,$00204281,$32280000,$02417fff
-	dc.l	$b0416e1c,$92403028,$00000240,$80008240
-	dc.l	$31410000,$61ffffff,$ff82103c,$00004e75
-	dc.l	$0c010020,$6e20e9e8,$08400004,$21400004
-	dc.l	$20280008,$e3a82140,$00080268,$80000000
-	dc.l	$103c0004,$4e750441,$00202028,$0008e3a8
-	dc.l	$21400004,$42a80008,$02688000,$0000103c
-	dc.l	$00044e75,$02688000,$0000103c,$00014e75
-	dc.l	$30280000,$02407fff,$0c407fff,$67480828
-	dc.l	$00070004,$6706103c,$00004e75,$4a406618
-	dc.l	$4aa80004,$660c4aa8,$00086606,$103c0001
-	dc.l	$4e75103c,$00044e75,$4aa80004,$66124aa8
-	dc.l	$0008660c,$02688000,$0000103c,$00014e75
-	dc.l	$103c0006,$4e754aa8,$00086612,$20280004
-	dc.l	$02807fff,$ffff6606,$103c0002,$4e750828
-	dc.l	$00060004,$6706103c,$00034e75,$103c0005
-	dc.l	$4e752028,$00002200,$02807ff0,$0000670e
-	dc.l	$0c807ff0,$00006728,$103c0000,$4e750281
-	dc.l	$000fffff,$66ff0000,$00144aa8,$000466ff
-	dc.l	$0000000a,$103c0001,$4e75103c,$00044e75
-	dc.l	$0281000f,$ffff66ff,$00000014,$4aa80004
-	dc.l	$66ff0000,$000a103c,$00024e75,$08010013
-	dc.l	$66ff0000,$000a103c,$00054e75,$103c0003
-	dc.l	$4e752028,$00002200,$02807f80,$0000670e
-	dc.l	$0c807f80,$0000671e,$103c0000,$4e750281
-	dc.l	$007fffff,$66ff0000,$000a103c,$00014e75
-	dc.l	$103c0004,$4e750281,$007fffff,$66ff0000
-	dc.l	$000a103c,$00024e75,$08010016,$66ff0000
-	dc.l	$000a103c,$00054e75,$103c0003,$4e752f01
-	dc.l	$08280007,$000056e8,$00023228,$00000241
-	dc.l	$7fff9240,$31410000,$2f08202f,$00040240
-	dc.l	$00c0e848,$61ffffff,$fae22057,$322f0006
-	dc.l	$024100c0,$e8494841,$322f0006,$02410030
-	dc.l	$e84961ff,$fffffc22,$205f08a8,$00070000
-	dc.l	$4a280002,$670a08e8,$00070000,$42280002
-	dc.l	$42804aa8,$0004660a,$4aa80008,$660408c0
-	dc.l	$0002082e,$0001ff66,$670608ee,$0005ff67
-	dc.l	$588f4e75,$2f010828,$00070000,$56e80002
-	dc.l	$32280000,$02417fff,$92403141,$00002f08
-	dc.l	$428061ff,$fffffa64,$2057323c,$00044841
-	dc.l	$322f0006,$02410030,$e84961ff,$fffffbaa
-	dc.l	$205f08a8,$00070000,$4a280002,$670a08e8
-	dc.l	$00070000,$42280002,$42804aa8,$0004660a
-	dc.l	$4aa80008,$660408c0,$0002082e,$0001ff66
-	dc.l	$670608ee,$0005ff67,$588f4e75,$02410010
-	dc.l	$e8088200,$3001e309,$600e0241,$00108200
-	dc.l	$48408200,$3001e309,$103b0008,$41fb1620
-	dc.l	$4e750200,$00020200,$00020200,$00020000
-	dc.l	$00000a08,$0a080a08,$0a080a08,$0a087fff
-	dc.l	$00000000,$00000000,$00000000,$00007ffe
-	dc.l	$0000ffff,$ffffffff,$ffff0000,$00007ffe
-	dc.l	$0000ffff,$ffffffff,$ffff0000,$00007fff
-	dc.l	$00000000,$00000000,$00000000,$00007fff
-	dc.l	$00000000,$00000000,$00000000,$0000407e
-	dc.l	$0000ffff,$ff000000,$00000000,$0000407e
-	dc.l	$0000ffff,$ff000000,$00000000,$00007fff
-	dc.l	$00000000,$00000000,$00000000,$00007fff
-	dc.l	$00000000,$00000000,$00000000,$000043fe
-	dc.l	$0000ffff,$ffffffff,$f8000000,$000043fe
-	dc.l	$0000ffff,$ffffffff,$f8000000,$00007fff
-	dc.l	$00000000,$00000000,$00000000,$00000000
-	dc.l	$00000000,$00000000,$00000000,$00000000
-	dc.l	$00000000,$00000000,$00000000,$00000000
-	dc.l	$00000000,$00000000,$00000000,$00000000
-	dc.l	$00000000,$00000000,$00000000,$0000ffff
-	dc.l	$00000000,$00000000,$00000000,$0000fffe
-	dc.l	$0000ffff,$ffffffff,$ffff0000,$0000ffff
-	dc.l	$00000000,$00000000,$00000000,$0000fffe
-	dc.l	$0000ffff,$ffffffff,$ffff0000,$0000ffff
-	dc.l	$00000000,$00000000,$00000000,$0000c07e
-	dc.l	$0000ffff,$ff000000,$00000000,$0000ffff
-	dc.l	$00000000,$00000000,$00000000,$0000c07e
-	dc.l	$0000ffff,$ff000000,$00000000,$0000ffff
-	dc.l	$00000000,$00000000,$00000000,$0000c3fe
-	dc.l	$0000ffff,$ffffffff,$f8000000,$0000ffff
-	dc.l	$00000000,$00000000,$00000000,$0000c3fe
-	dc.l	$0000ffff,$ffffffff,$f8000000,$0000e9ee
-	dc.l	$10c3ff42,$327b120a,$4efb9806,$4afc0008
-	dc.l	$00e001e0,$01480620,$0078041a,$00100620
-	dc.l	$4a2eff4e,$664cf228,$d0800000,$f2009000
-	dc.l	$f2007800,$f23c9000,$00000000,$f201a800
-	dc.l	$836eff66,$122eff41,$02010038,$6714206e
-	dc.l	$000c61ff,$ffffcfaa,$4a8166ff,$0000385a
-	dc.l	$4e75122e,$ff410241,$000761ff,$00002bb0
-	dc.l	$4e752228,$00000281,$80000000,$00810080
-	dc.l	$0000f201,$440060a4,$4a2eff4e,$664cf228
-	dc.l	$d0800000,$f2009000,$f2007000,$f23c9000
-	dc.l	$00000000,$f201a800,$836eff66,$122eff41
-	dc.l	$02010038,$6714206e,$000c61ff,$ffffcf58
-	dc.l	$4a8166ff,$00003800,$4e75122e,$ff410241
-	dc.l	$000761ff,$00002b0c,$4e752228,$00000281
-	dc.l	$80000000,$00810080,$0000f201,$440060a4
-	dc.l	$4a2eff4e,$664cf228,$d0800000,$f2009000
-	dc.l	$f2006000,$f23c9000,$00000000,$f201a800
-	dc.l	$836eff66,$122eff41,$02010038,$6714206e
-	dc.l	$000c61ff,$ffffcf06,$4a8166ff,$000037a6
-	dc.l	$4e75122e,$ff410241,$000761ff,$00002a68
-	dc.l	$4e752228,$00000281,$80000000,$00810080
-	dc.l	$0000f201,$440060a4,$3d680000,$ff84426e
-	dc.l	$ff862d68,$0004ff88,$2d680008,$ff8cf228
-	dc.l	$d0800000,$61ffffff,$e83e2248,$41eeff84
-	dc.l	$700c0c2e,$0008ff4a,$672661ff,$ffffcdee
-	dc.l	$4a816600,$00524a2e,$ff4e6602,$4e7508ee
-	dc.l	$0003ff66,$102eff62,$0200000a,$66164e75
-	dc.l	$61ffffff,$dc4a4a81,$6600002c,$4a2eff4e
-	dc.l	$66dc4e75,$41eeff84,$61ffffff,$f90e4440
-	dc.l	$02407fff,$026e8000,$ff84816e,$ff84f22e
-	dc.l	$d040ff84,$4e752cae,$ffd460ff,$00003702
-	dc.l	$02000030,$00000040,$2d40ff5c,$30280000
-	dc.l	$02407fff,$0c40407e,$6e0000e6,$67000152
-	dc.l	$0c403f81,$6d000058,$f228d080,$0000f22e
-	dc.l	$9000ff5c,$f23c8800,$00000000,$f2006400
-	dc.l	$f23c9000,$00000000,$f201a800,$836eff66
-	dc.l	$122eff41,$02010038,$6714206e,$000c61ff
-	dc.l	$ffffcdda,$4a8166ff,$0000367a,$4e75122e
-	dc.l	$ff410241,$000761ff,$0000293c,$4e7508ee
-	dc.l	$0003ff66,$3d680000,$ff842d68,$0004ff88
-	dc.l	$2d680008,$ff8c2f08,$42800c2e,$0004ff4e
-	dc.l	$660a41ee,$ff8461ff,$fffff840,$41eeff84
-	dc.l	$222eff5c,$61ffffff,$fa5841ee,$ff8461ff
-	dc.l	$0000034c,$122eff41,$02010038,$6714206e
-	dc.l	$000c61ff,$ffffcd66,$4a8166ff,$00003606
-	dc.l	$600e122e,$ff410241,$000761ff,$000028c8
-	dc.l	$122eff62,$0201000a,$660000b8,$588f4e75
-	dc.l	$4a280007,$660e4aa8,$00086608,$006e1048
-	dc.l	$ff666006,$006e1248,$ff662f08,$4a280000
-	dc.l	$5bc1202e,$ff5c61ff,$fffffae4,$f210d080
-	dc.l	$f2006400,$122eff41,$02010038,$6714206e
-	dc.l	$000c61ff,$ffffccf6,$4a8166ff,$00003596
-	dc.l	$600e122e,$ff410241,$000761ff,$00002858
-	dc.l	$122eff62,$0201000a,$6600007c,$588f4e75
-	dc.l	$32280000,$02418000,$00413fff,$3d41ff84
-	dc.l	$2d680004,$ff882d68,$0008ff8c,$f22e9000
-	dc.l	$ff5cf22e,$4800ff84,$f23c9000,$00000000
-	dc.l	$f2000018,$f23c5838,$0002f294,$fe7c6000
-	dc.l	$ff50205f,$3d680000,$ff842d68,$0004ff88
-	dc.l	$2d680008,$ff8c0c2e,$0004ff4e,$662c41ee
-	dc.l	$ff8461ff,$fffff714,$44800240,$7fffefee
-	dc.l	$004fff84,$6014205f,$3d680000,$ff842d68
-	dc.l	$0004ff88,$2d680008,$ff8c08ae,$0007ff84
-	dc.l	$56eeff86,$41eeff84,$122eff5f,$e8090241
-	dc.l	$000c4841,$122eff5f,$e8090241,$00034280
-	dc.l	$61ffffff,$f5544a2e,$ff866706,$08ee0007
-	dc.l	$ff84f22e,$d040ff84,$4e750200,$00300000
-	dc.l	$00802d40,$ff5c3028,$00000240,$7fff0c40
-	dc.l	$43fe6e00,$00c86700,$01200c40,$3c016d00
-	dc.l	$0046f228,$d0800000,$f22e9000,$ff5cf23c
-	dc.l	$88000000,$0000f22e,$7400ff54,$f23c9000
-	dc.l	$00000000,$f200a800,$816eff66,$226e000c
-	dc.l	$41eeff54,$700861ff,$ffffcaf2,$4a8166ff
-	dc.l	$00003450,$4e7508ee,$0003ff66,$3d680000
-	dc.l	$ff842d68,$0004ff88,$2d680008,$ff8c2f08
-	dc.l	$42800c2e,$0004ff4e,$660a41ee,$ff8461ff
-	dc.l	$fffff618,$41eeff84,$222eff5c,$61ffffff
-	dc.l	$f83041ee,$ff8461ff,$000000d2,$2d40ff54
-	dc.l	$2d41ff58,$226e000c,$41eeff54,$700861ff
-	dc.l	$ffffca8a,$4a8166ff,$000033e8,$122eff62
-	dc.l	$0201000a,$6600fe9c,$588f4e75,$3028000a
-	dc.l	$024007ff,$6608006e,$1048ff66,$6006006e
-	dc.l	$1248ff66,$2f084a28,$00005bc1,$202eff5c
-	dc.l	$61ffffff,$f8caf210,$d080f22e,$7400ff54
-	dc.l	$226e000c,$41eeff54,$700861ff,$ffffca2e
-	dc.l	$4a8166ff,$0000338c,$122eff62,$0201000a
-	dc.l	$6600fe74,$588f4e75,$32280000,$02418000
-	dc.l	$00413fff,$3d41ff84,$2d680004,$ff882d68
-	dc.l	$0008ff8c,$f22e9000,$ff5cf22e,$4800ff84
-	dc.l	$f23c9000,$00000000,$f2000018,$f23c5838
-	dc.l	$0002f294,$feae6000,$ff644280,$30280000
-	dc.l	$04403fff,$064003ff,$4a280004,$6b025340
-	dc.l	$4840e988,$4a280000,$6a0408c0,$001f2228
-	dc.l	$0004e9c1,$10548081,$2d40ff54,$22280004
-	dc.l	$7015e1a9,$2d41ff58,$22280008,$e9c10015
-	dc.l	$222eff58,$8280202e,$ff544e75,$42803028
-	dc.l	$00000440,$3fff0640,$007f4a28,$00046b02
-	dc.l	$53404840,$ef884a28,$00006a04,$08c0001f
-	dc.l	$22280004,$02817fff,$ff00e089,$80814e75
-	dc.l	$61ffffff,$e3822f08,$102eff4e,$66000082
-	dc.l	$082e0004,$ff426712,$122eff43,$e8090241
-	dc.l	$000761ff,$000024de,$6004102e,$ff43ebc0
-	dc.l	$06472f00,$41eeff6c,$61ff0000,$2b2002ae
-	dc.l	$cffff00f,$ff84201f,$4a2eff87,$66164aae
-	dc.l	$ff886610,$4aaeff8c,$660a4a80,$6606026e
-	dc.l	$f000ff84,$41eeff84,$225f700c,$0c2e0008
-	dc.l	$ff4a670e,$61ffffff,$c8d44a81,$6600fb38
-	dc.l	$4e7561ff,$ffffd748,$4a816600,$fb2a4e75
-	dc.l	$0c000004,$6700ff7a,$41eeff6c,$426eff6e
-	dc.l	$0c000005,$670260c0,$006e4080,$ff6608ee
-	dc.l	$0006ff70,$60b251fc,$51fc51fc,$51fc51fc
-	dc.l	$ffffc001,$ffffff81,$fffffc01,$00004000
-	dc.l	$0000007f,$000003ff,$02000030,$00000040
-	dc.l	$60080200,$00300000,$00802d40,$ff5c4241
-	dc.l	$122eff4f,$e709822e,$ff4e6600,$02e43d69
-	dc.l	$0000ff90,$2d690004,$ff942d69,$0008ff98
-	dc.l	$3d680000,$ff842d68,$0004ff88,$2d680008
-	dc.l	$ff8c61ff,$ffffef24,$2f0061ff,$ffffefc8
-	dc.l	$d197322e,$ff5eec09,$201fb0bb,$14846700
-	dc.l	$011e6d00,$0062b0bb,$14846700,$021a6e00
-	dc.l	$014af22e,$d080ff90,$f22e9000,$ff5cf23c
-	dc.l	$88000000,$0000f22e,$4823ff84,$f201a800
-	dc.l	$f23c9000,$00000000,$83aeff64,$f22ef080
-	dc.l	$ff842f02,$322eff84,$24010281,$00007fff
-	dc.l	$02428000,$92808242,$3d41ff84,$241ff22e
-	dc.l	$d080ff84,$4e75f22e,$d080ff90,$f22e9000
-	dc.l	$ff5cf23c,$88000000,$0000f22e,$4823ff84
-	dc.l	$f201a800,$f23c9000,$00000000,$83aeff64
-	dc.l	$00ae0000,$1048ff64,$122eff62,$02010013
-	dc.l	$661c082e,$0003ff64,$56c1202e,$ff5c61ff
-	dc.l	$fffff5dc,$812eff64,$f210d080,$4e75222e
-	dc.l	$ff5c0201,$00c06634,$f22ef080,$ff842f02
-	dc.l	$322eff84,$34010281,$00007fff,$92800481
-	dc.l	$00006000,$02417fff,$02428000,$82423d41
-	dc.l	$ff84241f,$f22ed040,$ff8460a6,$f22ed080
-	dc.l	$ff90222e,$ff5c0201,$0030f201,$9000f22e
-	dc.l	$4823ff84,$f23c9000,$00000000,$60aaf22e
-	dc.l	$d080ff90,$f22e9000,$ff5cf23c,$88000000
-	dc.l	$0000f22e,$4823ff84,$f201a800,$f23c9000
-	dc.l	$00000000,$83aeff64,$f2000098,$f23c58b8
-	dc.l	$0002f293,$ff3c6000,$fee408ee,$0003ff66
-	dc.l	$f22ed080,$ff90f23c,$90000000,$0010f23c
-	dc.l	$88000000,$0000f22e,$4823ff84,$f201a800
-	dc.l	$f23c9000,$00000000,$83aeff64,$122eff62
-	dc.l	$0201000b,$6620f22e,$f080ff84,$41eeff84
-	dc.l	$222eff5c,$61ffffff,$f3e8812e,$ff64f22e
-	dc.l	$d080ff84,$4e75f22e,$d040ff90,$222eff5c
-	dc.l	$020100c0,$6652f22e,$9000ff5c,$f23c8800
-	dc.l	$00000000,$f22e48a3,$ff84f23c,$90000000
-	dc.l	$0000f22e,$f040ff84,$2f02322e,$ff842401
-	dc.l	$02810000,$7fff0242,$80009280,$06810000
-	dc.l	$60000241,$7fff8242,$3d41ff84,$241ff22e
-	dc.l	$d040ff84,$6000ff80,$222eff5c,$02010030
-	dc.l	$f2019000,$60a6f22e,$d080ff90,$f22e9000
-	dc.l	$ff5cf23c,$88000000,$0000f22e,$4823ff84
-	dc.l	$f201a800,$f23c9000,$00000000,$83aeff64
-	dc.l	$f2000098,$f23c58b8,$0002f292,$fde0f294
-	dc.l	$fefaf22e,$d040ff90,$222eff5c,$020100c0
-	dc.l	$00010010,$f2019000,$f23c8800,$00000000
-	dc.l	$f22e48a3,$ff84f23c,$90000000,$0000f200
-	dc.l	$0498f23c,$58b80002,$f293fda2,$6000febc
-	dc.l	$323b120a,$4efb1006,$4afc0030,$fd120072
-	dc.l	$00cc006c,$fd120066,$00000000,$00720072
-	dc.l	$0060006c,$00720066,$00000000,$009e0060
-	dc.l	$009e006c,$009e0066,$00000000,$006c006c
-	dc.l	$006c006c,$006c0066,$00000000,$fd120072
-	dc.l	$00cc006c,$fd120066,$00000000,$00660066
-	dc.l	$00660066,$00660066,$00000000,$60ffffff
-	dc.l	$ed6460ff,$ffffecda,$60ffffff,$ecd41028
-	dc.l	$00001229,$0000b101,$6a10f23c,$44008000
-	dc.l	$00001d7c,$000cff64,$4e75f23c,$44000000
-	dc.l	$00001d7c,$0004ff64,$4e75f229,$d0800000
-	dc.l	$10280000,$12290000,$b1016a10,$f2000018
-	dc.l	$f200001a,$1d7c000a,$ff644e75,$f2000018
-	dc.l	$1d7c0002,$ff644e75,$f228d080,$00001028
-	dc.l	$00001229,$0000b101,$6ae260d0,$02000030
-	dc.l	$00000040,$60080200,$00300000,$00802d40
-	dc.l	$ff5c122e,$ff4e6600,$02620200,$00c06600
-	dc.l	$007c4a28,$00006a06,$08ee0003,$ff64f228
-	dc.l	$d0800000,$4e750200,$00c06600,$006008ee
-	dc.l	$0003ff66,$4a280000,$6a0608ee,$0003ff64
-	dc.l	$f228d080,$0000082e,$0003ff62,$66024e75
-	dc.l	$3d680000,$ff842d68,$0004ff88,$2d680008
-	dc.l	$ff8c41ee,$ff8461ff,$ffffef60,$44400640
-	dc.l	$6000322e,$ff840241,$80000240,$7fff8041
-	dc.l	$3d40ff84,$f22ed040,$ff844e75,$0c000040
-	dc.l	$667e3d68,$0000ff84,$2d680004,$ff882d68
-	dc.l	$0008ff8c,$61ffffff,$eac20c80,$0000007f
-	dc.l	$6c000092,$0c80ffff,$ff816700,$01786d00
-	dc.l	$00f4f23c,$88000000,$0000f22e,$9000ff5c
-	dc.l	$f22e4800,$ff84f201,$a800f23c,$90000000
-	dc.l	$000083ae,$ff642f02,$f22ef080,$ff84322e
-	dc.l	$ff843401,$02810000,$7fff9280,$02428000
-	dc.l	$84413d42,$ff84241f,$f22ed080,$ff844e75
-	dc.l	$3d680000,$ff842d68,$0004ff88,$2d680008
-	dc.l	$ff8c61ff,$ffffea44,$0c800000,$03ff6c00
-	dc.l	$00140c80,$fffffc01,$670000fa,$6d000076
-	dc.l	$6000ff80,$08ee0003,$ff664a2e,$ff846a06
-	dc.l	$08ee0003,$ff64122e,$ff620201,$000b661a
-	dc.l	$41eeff84,$222eff5c,$61ffffff,$f084812e
-	dc.l	$ff64f22e,$d080ff84,$4e752d6e,$ff88ff94
-	dc.l	$2d6eff8c,$ff98322e,$ff842f02,$34010281
-	dc.l	$00007fff,$92800242,$80000681,$00006000
-	dc.l	$02417fff,$84413d42,$ff90f22e,$d040ff90
-	dc.l	$241f60ac,$f23c8800,$00000000,$f22e9000
-	dc.l	$ff5cf22e,$4800ff84,$f23c9000,$00000000
-	dc.l	$f201a800,$83aeff64,$00ae0000,$1048ff64
-	dc.l	$122eff62,$02010013,$661c082e,$0003ff64
-	dc.l	$56c1202e,$ff5c61ff,$fffff0f4,$812eff64
-	dc.l	$f210d080,$4e752f02,$322eff84,$24010281
-	dc.l	$00007fff,$02428000,$92800481,$00006000
-	dc.l	$02417fff,$82423d41,$ff84241f,$f22ed040
-	dc.l	$ff8460b6,$f23c8800,$00000000,$f22e9000
-	dc.l	$ff5cf22e,$4800ff84,$f201a800,$f23c9000
-	dc.l	$00000000,$83aeff64,$f2000098,$f23c58b8
-	dc.l	$0002f293,$ff746000,$fe7e0c01,$00046700
-	dc.l	$fdb60c01,$000567ff,$ffffe9ee,$0c010003
-	dc.l	$67ffffff,$e9f8f228,$48000000,$f200a800
-	dc.l	$e1981d40,$ff644e75,$51fc51fc,$51fc51fc
-	dc.l	$00003fff,$0000007e,$000003fe,$ffffc001
-	dc.l	$ffffff81,$fffffc01,$02000030,$00000040
-	dc.l	$60080200,$00300000,$00802d40,$ff5c4241
-	dc.l	$122eff4f,$e709822e,$ff4e6600,$02d63d69
-	dc.l	$0000ff90,$2d690004,$ff942d69,$0008ff98
-	dc.l	$3d680000,$ff842d68,$0004ff88,$2d680008
-	dc.l	$ff8c61ff,$ffffe864,$2f0061ff,$ffffe908
-	dc.l	$4497d197,$322eff5e,$ec09201f,$b0bb148e
-	dc.l	$6f000074,$b0bb1520,$ff7a6700,$020c6e00
-	dc.l	$013cf22e,$d080ff90,$f22e9000,$ff5cf23c
-	dc.l	$88000000,$0000f22e,$4820ff84,$f201a800
-	dc.l	$f23c9000,$00000000,$83aeff64,$f22ef080
-	dc.l	$ff842f02,$322eff84,$24010281,$00007fff
-	dc.l	$02428000,$92808242,$3d41ff84,$241ff22e
-	dc.l	$d080ff84,$4e750000,$7fff0000,$407f0000
-	dc.l	$43ff201f,$60c62f00,$f22ed080,$ff90f22e
-	dc.l	$9000ff5c,$f23c8800,$00000000,$f22e4820
-	dc.l	$ff84f200,$a800f23c,$90000000,$000081ae
-	dc.l	$ff64f227,$e0013017,$dffc0000,$000c0280
-	dc.l	$00007fff,$9097b0bb,$14ae6db6,$201f00ae
-	dc.l	$00001048,$ff64122e,$ff620201,$0013661c
-	dc.l	$082e0003,$ff6456c1,$202eff5c,$61ffffff
-	dc.l	$eeee812e,$ff64f210,$d0804e75,$222eff5c
-	dc.l	$020100c0,$6634f22e,$f080ff84,$2f02322e
-	dc.l	$ff843401,$02810000,$7fff9280,$04810000
-	dc.l	$60000241,$7fff0242,$80008242,$3d41ff84
-	dc.l	$241ff22e,$d040ff84,$60a6f22e,$d080ff90
-	dc.l	$222eff5c,$02010030,$f2019000,$f22e4820
-	dc.l	$ff84f23c,$90000000,$000060aa,$08ee0003
-	dc.l	$ff66f22e,$d080ff90,$f23c9000,$00000010
-	dc.l	$f23c8800,$00000000,$f22e4820,$ff84f201
-	dc.l	$a800f23c,$90000000,$000083ae,$ff64122e
-	dc.l	$ff620201,$000b6620,$f22ef080,$ff8441ee
-	dc.l	$ff84222e,$ff5c61ff,$ffffed36,$812eff64
-	dc.l	$f22ed080,$ff844e75,$f22ed040,$ff90222e
-	dc.l	$ff5c0201,$00c06652,$f22e9000,$ff5cf23c
-	dc.l	$88000000,$0000f22e,$48a0ff84,$f23c9000
-	dc.l	$00000000,$f22ef040,$ff842f02,$322eff84
-	dc.l	$24010281,$00007fff,$02428000,$92800681
-	dc.l	$00006000,$02417fff,$82423d41,$ff84241f
-	dc.l	$f22ed040,$ff846000,$ff80222e,$ff5c0201
-	dc.l	$0030f201,$900060a6,$f22ed080,$ff90f22e
-	dc.l	$9000ff5c,$f23c8800,$00000000,$f22e4820
-	dc.l	$ff84f201,$a800f23c,$90000000,$000083ae
-	dc.l	$ff64f200,$0098f23c,$58b80001,$f292fdee
-	dc.l	$f294fefa,$f22ed040,$ff90222e,$ff5c0201
-	dc.l	$00c00001,$0010f201,$9000f23c,$88000000
-	dc.l	$0000f22e,$48a0ff84,$f23c9000,$00000000
-	dc.l	$f2000498,$f23c58b8,$0001f293,$fdb06000
-	dc.l	$febc323b,$120a4efb,$10064afc,$0030fd20
-	dc.l	$009e0072,$0060fd20,$00660000,$00000072
-	dc.l	$006c0072,$00600072,$00660000,$000000d0
-	dc.l	$00d0006c,$006000d0,$00660000,$00000060
-	dc.l	$00600060,$00600060,$00660000,$0000fd20
-	dc.l	$009e0072,$0060fd20,$00660000,$00000066
-	dc.l	$00660066,$00660066,$00660000,$000060ff
-	dc.l	$ffffe62e,$60ffffff,$e62860ff,$ffffe6a6
-	dc.l	$10280000,$12290000,$b1016a10,$f23c4400
-	dc.l	$80000000,$1d7c000c,$ff644e75,$f23c4400
-	dc.l	$00000000,$1d7c0004,$ff644e75,$006e0410
-	dc.l	$ff661028,$00001229,$0000b101,$6a10f23c
-	dc.l	$4400ff80,$00001d7c,$000aff64,$4e75f23c
-	dc.l	$44007f80,$00001d7c,$0002ff64,$4e751029
-	dc.l	$00001228,$0000b101,$6a16f229,$d0800000
-	dc.l	$f2000018,$f200001a,$1d7c000a,$ff644e75
-	dc.l	$f229d080,$0000f200,$00181d7c,$0002ff64
-	dc.l	$4e750200,$00300000,$00406008,$02000030
-	dc.l	$00000080,$2d40ff5c,$122eff4e,$66000276
-	dc.l	$020000c0,$66000090,$2d680004,$ff882d68
-	dc.l	$0008ff8c,$30280000,$0a408000,$6a061d7c
-	dc.l	$0008ff64,$3d40ff84,$f22ed080,$ff844e75
-	dc.l	$020000c0,$666008ee,$0003ff66,$2d680004
-	dc.l	$ff882d68,$0008ff8c,$30280000,$0a408000
-	dc.l	$6a061d7c,$0008ff64,$3d40ff84,$f22ed080
-	dc.l	$ff84082e,$0003ff62,$66024e75,$41eeff84
-	dc.l	$61ffffff,$e8764440,$06406000,$322eff84
-	dc.l	$02418000,$02407fff,$80413d40,$ff84f22e
-	dc.l	$d040ff84,$4e750c00,$0040667e,$3d680000
-	dc.l	$ff842d68,$0004ff88,$2d680008,$ff8c61ff
-	dc.l	$ffffe3d8,$0c800000,$007f6c00,$00900c80
-	dc.l	$ffffff81,$67000178,$6d0000f4,$f23c8800
-	dc.l	$00000000,$f22e9000,$ff5cf22e,$481aff84
-	dc.l	$f201a800,$f23c9000,$00000000,$83aeff64
-	dc.l	$2f02f22e,$f080ff84,$322eff84,$34010281
-	dc.l	$00007fff,$92800242,$80008441,$3d42ff84
-	dc.l	$241ff22e,$d080ff84,$4e753d68,$0000ff84
-	dc.l	$2d680004,$ff882d68,$0008ff8c,$61ffffff
-	dc.l	$e35a0c80,$000003ff,$6c120c80,$fffffc01
-	dc.l	$670000fc,$6d000078,$6000ff82,$08ee0003
-	dc.l	$ff660a2e,$0080ff84,$6a0608ee,$0003ff64
-	dc.l	$122eff62,$0201000b,$661a41ee,$ff84222e
-	dc.l	$ff5c61ff,$ffffe99a,$812eff64,$f22ed080
-	dc.l	$ff844e75,$2d6eff88,$ff942d6e,$ff8cff98
-	dc.l	$322eff84,$2f022401,$02810000,$7fff0242
-	dc.l	$80009280,$06810000,$60000241,$7fff8242
-	dc.l	$3d41ff90,$f22ed040,$ff90241f,$60acf23c
-	dc.l	$88000000,$0000f22e,$9000ff5c,$f22e481a
-	dc.l	$ff84f23c,$90000000,$0000f201,$a80083ae
-	dc.l	$ff6400ae,$00001048,$ff64122e,$ff620201
-	dc.l	$0013661c,$082e0003,$ff6456c1,$202eff5c
-	dc.l	$61ffffff,$ea0a812e,$ff64f210,$d0804e75
-	dc.l	$2f02322e,$ff842401,$02810000,$7fff0242
-	dc.l	$80009280,$04810000,$60000241,$7fff8242
-	dc.l	$3d41ff84,$f22ed040,$ff84241f,$60b6f23c
-	dc.l	$88000000,$0000f22e,$9000ff5c,$f22e481a
-	dc.l	$ff84f201,$a800f23c,$90000000,$000083ae
-	dc.l	$ff64f200,$0098f23c,$58b80002,$f293ff74
-	dc.l	$6000fe7e,$0c010004,$6700fdb6,$0c010005
-	dc.l	$67ffffff,$e3040c01,$000367ff,$ffffe30e
-	dc.l	$f228481a,$0000f200,$a800e198,$1d40ff64
-	dc.l	$4e75122e,$ff4e6610,$4a280000,$6b024e75
-	dc.l	$1d7c0008,$ff644e75,$0c010001,$67400c01
-	dc.l	$00026724,$0c010005,$67ffffff,$e2bc0c01
-	dc.l	$000367ff,$ffffe2c6,$4a280000,$6b024e75
-	dc.l	$1d7c0008,$ff644e75,$4a280000,$6b081d7c
-	dc.l	$0002ff64,$4e751d7c,$000aff64,$4e754a28
-	dc.l	$00006b08,$1d7c0004,$ff644e75,$1d7c000c
-	dc.l	$ff644e75,$122eff4e,$66280200,$0030f200
-	dc.l	$9000f23c,$88000000,$0000f228,$48010000
-	dc.l	$f23c9000,$00000000,$f200a800,$81aeff64
-	dc.l	$4e750c01,$0001672e,$0c010002,$674e0c01
-	dc.l	$00046710,$0c010005,$67ffffff,$e22c60ff
-	dc.l	$ffffe23a,$3d680000,$ff841d7c,$0080ff88
-	dc.l	$41eeff84,$60a44a28,$00006b10,$f23c4400
-	dc.l	$00000000,$1d7c0004,$ff644e75,$f23c4400
-	dc.l	$80000000,$1d7c000c,$ff644e75,$f228d080
-	dc.l	$00004a28,$00006b08,$1d7c0002,$ff644e75
-	dc.l	$1d7c000a,$ff644e75,$122eff4e,$6618f23c
-	dc.l	$88000000,$0000f228,$48030000,$f200a800
-	dc.l	$81aeff64,$4e750c01,$0001672e,$0c010002
-	dc.l	$674e0c01,$00046710,$0c010005,$67ffffff
-	dc.l	$e19860ff,$ffffe1a6,$3d680000,$ff841d7c
-	dc.l	$0080ff88,$41eeff84,$60b44a28,$00006b10
-	dc.l	$f23c4400,$00000000,$1d7c0004,$ff644e75
-	dc.l	$f23c4400,$80000000,$1d7c000c,$ff644e75
-	dc.l	$f228d080,$00004a28,$00006b08,$1d7c0002
-	dc.l	$ff644e75,$1d7c000a,$ff644e75,$02000030
-	dc.l	$00000040,$60080200,$00300000,$00802d40
-	dc.l	$ff5c122e,$ff4e6600,$025c0200,$00c0667e
-	dc.l	$2d680004,$ff882d68,$0008ff8c,$32280000
-	dc.l	$0881000f,$3d41ff84,$f22ed080,$ff844e75
-	dc.l	$020000c0,$665808ee,$0003ff66,$2d680004
-	dc.l	$ff882d68,$0008ff8c,$30280000,$0880000f
-	dc.l	$3d40ff84,$f22ed080,$ff84082e,$0003ff62
-	dc.l	$66024e75,$41eeff84,$61ffffff,$e41e4440
-	dc.l	$06406000,$322eff84,$02418000,$02407fff
-	dc.l	$80413d40,$ff84f22e,$d040ff84,$4e750c00
-	dc.l	$0040667e,$3d680000,$ff842d68,$0004ff88
-	dc.l	$2d680008,$ff8c61ff,$ffffdf80,$0c800000
-	dc.l	$007f6c00,$00900c80,$ffffff81,$67000170
-	dc.l	$6d0000ec,$f23c8800,$00000000,$f22e9000
-	dc.l	$ff5cf22e,$4818ff84,$f201a800,$f23c9000
-	dc.l	$00000000,$83aeff64,$2f02f22e,$f080ff84
-	dc.l	$322eff84,$24010281,$00007fff,$92800242
-	dc.l	$80008441,$3d42ff84,$241ff22e,$d080ff84
-	dc.l	$4e753d68,$0000ff84,$2d680004,$ff882d68
-	dc.l	$0008ff8c,$61ffffff,$df020c80,$000003ff
-	dc.l	$6c120c80,$fffffc01,$670000f4,$6d000070
-	dc.l	$6000ff82,$08ee0003,$ff6608ae,$0007ff84
-	dc.l	$122eff62,$0201000b,$661a41ee,$ff84222e
-	dc.l	$ff5c61ff,$ffffe54a,$812eff64,$f22ed080
-	dc.l	$ff844e75,$2d6eff88,$ff942d6e,$ff8cff98
-	dc.l	$322eff84,$2f022401,$02810000,$7fff0242
-	dc.l	$80009280,$06810000,$60000241,$7fff8242
-	dc.l	$3d41ff90,$f22ed040,$ff90241f,$60acf23c
-	dc.l	$88000000,$0000f22e,$9000ff5c,$f22e4818
-	dc.l	$ff84f23c,$90000000,$0000f201,$a80083ae
-	dc.l	$ff6400ae,$00001048,$ff64122e,$ff620201
-	dc.l	$0013661c,$082e0003,$ff6456c1,$202eff5c
-	dc.l	$61ffffff,$e5ba812e,$ff64f210,$d0804e75
-	dc.l	$2f02322e,$ff842401,$02810000,$7fff0242
-	dc.l	$80009280,$04810000,$60000241,$7fff8242
-	dc.l	$3d41ff84,$f22ed040,$ff84241f,$60b6f23c
-	dc.l	$88000000,$0000f22e,$9000ff5c,$f22e4818
-	dc.l	$ff84f201,$a800f23c,$90000000,$000083ae
-	dc.l	$ff64f200,$0098f23c,$58b80002,$f293ff74
-	dc.l	$6000fe86,$0c010004,$6700fdc6,$0c010005
-	dc.l	$67ffffff,$deb40c01,$000367ff,$ffffdebe
-	dc.l	$f2284818,$00000c01,$00026708,$1d7c0004
-	dc.l	$ff644e75,$1d7c0002,$ff644e75,$4241122e
-	dc.l	$ff4fe709,$822eff4e,$6618f229,$d0800000
-	dc.l	$f2284838,$0000f200,$a800e198,$1d40ff64
-	dc.l	$4e75323b,$120a4efb,$10064afc,$0030ffdc
-	dc.l	$ffdcffdc,$006000f8,$006e0000,$0000ffdc
-	dc.l	$ffdcffdc,$0060007c,$006e0000,$0000ffdc
-	dc.l	$ffdcffdc,$0060007c,$006e0000,$00000060
-	dc.l	$00600060,$00600060,$006e0000,$00000114
-	dc.l	$009c009c,$006000bc,$006e0000,$0000006e
-	dc.l	$006e006e,$006e006e,$006e0000,$000061ff
-	dc.l	$ffffddde,$022e00f7,$ff644e75,$61ffffff
-	dc.l	$ddd0022e,$00f7ff64,$4e753d68,$0000ff84
-	dc.l	$20280004,$08c0001f,$2d40ff88,$2d680008
-	dc.l	$ff8c41ee,$ff846000,$ff422d69,$0000ff84
-	dc.l	$20290004,$08c0001f,$2d40ff88,$2d690008
-	dc.l	$ff8c43ee,$ff846000,$ff223d69,$0000ff90
-	dc.l	$3d680000,$ff842029,$000408c0,$001f2d40
-	dc.l	$ff942028,$000408c0,$001f2d40,$ff882d69
-	dc.l	$0008ff98,$2d680008,$ff8c43ee,$ff9041ee
-	dc.l	$ff846000,$fee61028,$00001229,$0000b101
-	dc.l	$6b00ff78,$4a006b02,$4e751d7c,$0008ff64
-	dc.l	$4e751028,$00001229,$0000b101,$6b00ff7c
-	dc.l	$4a006a02,$4e751d7c,$0008ff64,$4e752d40
-	dc.l	$ff5c4241,$122eff4f,$e709822e,$ff4e6600
-	dc.l	$02a03d69,$0000ff90,$2d690004,$ff942d69
-	dc.l	$0008ff98,$3d680000,$ff842d68,$0004ff88
-	dc.l	$2d680008,$ff8c61ff,$ffffdbf0,$2f0061ff
-	dc.l	$ffffdc94,$d09f0c80,$ffffc001,$670000f8
-	dc.l	$6d000064,$0c800000,$40006700,$01da6e00
-	dc.l	$0122f22e,$d080ff90,$f22e9000,$ff5cf23c
-	dc.l	$88000000,$0000f22e,$4827ff84,$f201a800
-	dc.l	$f23c9000,$00000000,$83aeff64,$f22ef080
-	dc.l	$ff842f02,$322eff84,$24010281,$00007fff
-	dc.l	$02428000,$92808242,$3d41ff84,$241ff22e
-	dc.l	$d080ff84,$4e75f22e,$d080ff90,$f22e9000
-	dc.l	$ff5cf23c,$88000000,$0000f22e,$4827ff84
-	dc.l	$f201a800,$f23c9000,$00000000,$83aeff64
-	dc.l	$00ae0000,$1048ff64,$122eff62,$02010013
-	dc.l	$6620082e,$0003ff64,$56c1202e,$ff5c0200
-	dc.l	$003061ff,$ffffe2a8,$812eff64,$f210d080
-	dc.l	$4e75f22e,$f080ff84,$2f02322e,$ff842401
-	dc.l	$02810000,$7fff9280,$04810000,$60000241
-	dc.l	$7fff0242,$80008242,$3d41ff84,$241ff22e
-	dc.l	$d040ff84,$60acf22e,$d080ff90,$f22e9000
-	dc.l	$ff5cf23c,$88000000,$0000f22e,$4827ff84
-	dc.l	$f201a800,$f23c9000,$00000000,$83aeff64
-	dc.l	$f2000098,$f23c58b8,$0002f293,$ff646000
-	dc.l	$ff0c08ee,$0003ff66,$f22ed080,$ff90f23c
-	dc.l	$90000000,$0010f23c,$88000000,$0000f22e
-	dc.l	$4827ff84,$f201a800,$f23c9000,$00000000
-	dc.l	$83aeff64,$122eff62,$0201000b,$6620f22e
-	dc.l	$f080ff84,$41eeff84,$222eff5c,$61ffffff
-	dc.l	$e166812e,$ff64f22e,$d080ff84,$4e75f22e
-	dc.l	$d040ff90,$f22e9000,$ff5cf23c,$88000000
-	dc.l	$0000f22e,$48a7ff84,$f23c9000,$00000000
-	dc.l	$f22ef040,$ff842f02,$322eff84,$24010281
-	dc.l	$00007fff,$02428000,$92800681,$00006000
-	dc.l	$02417fff,$82423d41,$ff84241f,$f22ed040
-	dc.l	$ff846000,$ff8af22e,$d080ff90,$f22e9000
-	dc.l	$ff5cf23c,$88000000,$0000f22e,$4827ff84
-	dc.l	$f201a800,$f23c9000,$00000000,$83aeff64
-	dc.l	$f2000098,$f23c58b8,$0002f292,$fe20f294
-	dc.l	$ff12f22e,$d040ff90,$222eff5c,$020100c0
-	dc.l	$00010010,$f2019000,$f23c8800,$00000000
-	dc.l	$f22e48a7,$ff84f23c,$90000000,$0000f200
-	dc.l	$0498f23c,$58b80002,$f293fde2,$6000fed4
-	dc.l	$323b120a,$4efb1006,$4afc0030,$fd560072
-	dc.l	$0078006c,$fd560066,$00000000,$00720072
-	dc.l	$0060006c,$00720066,$00000000,$007e0060
-	dc.l	$007e006c,$007e0066,$00000000,$006c006c
-	dc.l	$006c006c,$006c0066,$00000000,$fd560072
-	dc.l	$0078006c,$fd560066,$00000000,$00660066
-	dc.l	$00660066,$00660066,$00000000,$60ffffff
-	dc.l	$da7460ff,$ffffd9ea,$60ffffff,$d9e460ff
-	dc.l	$ffffed0e,$60ffffff,$ed6260ff,$ffffed2e
-	dc.l	$2d40ff5c,$4241122e,$ff4fe709,$822eff4e
-	dc.l	$6600027c,$3d690000,$ff902d69,$0004ff94
-	dc.l	$2d690008,$ff983d68,$0000ff84,$2d680004
-	dc.l	$ff882d68,$0008ff8c,$61ffffff,$d8ae2f00
-	dc.l	$61ffffff,$d9524497,$d197322e,$ff5eec09
-	dc.l	$201f0c80,$ffffc001,$6f000064,$0c800000
-	dc.l	$3fff6700,$01b66e00,$0100f22e,$d080ff90
-	dc.l	$f22e9000,$ff5cf23c,$88000000,$0000f22e
-	dc.l	$4824ff84,$f201a800,$f23c9000,$00000000
-	dc.l	$83aeff64,$f22ef080,$ff842f02,$322eff84
-	dc.l	$24010281,$00007fff,$02428000,$92808242
-	dc.l	$3d41ff84,$241ff22e,$d080ff84,$4e75f22e
-	dc.l	$d080ff90,$f22e9000,$ff5cf23c,$88000000
-	dc.l	$0000f22e,$4824ff84,$f201a800,$f23c9000
-	dc.l	$00000000,$83aeff64,$f227e001,$3217dffc
-	dc.l	$0000000c,$02810000,$7fff9280,$0c810000
-	dc.l	$7fff6d90,$006e1048,$ff66122e,$ff620201
-	dc.l	$00136620,$082e0003,$ff6456c1,$202eff5c
-	dc.l	$02000030,$61ffffff,$df46812e,$ff64f210
-	dc.l	$d0804e75,$f22ef080,$ff842f02,$322eff84
-	dc.l	$24010281,$00007fff,$02428000,$92800481
-	dc.l	$00006000,$02417fff,$82423d41,$ff84241f
-	dc.l	$f22ed040,$ff8460ac,$08ee0003,$ff66f22e
-	dc.l	$d080ff90,$f23c9000,$00000010,$f23c8800
-	dc.l	$00000000,$f22e4824,$ff84f201,$a800f23c
-	dc.l	$90000000,$000083ae,$ff64122e,$ff620201
-	dc.l	$000b6620,$f22ef080,$ff8441ee,$ff84222e
-	dc.l	$ff5c61ff,$ffffde40,$812eff64,$f22ed080
-	dc.l	$ff844e75,$f22ed040,$ff90f22e,$9000ff5c
-	dc.l	$f23c8800,$00000000,$f22e48a4,$ff84f23c
-	dc.l	$90000000,$0000f22e,$f040ff84,$2f02322e
-	dc.l	$ff842401,$02810000,$7fff0242,$80009280
-	dc.l	$06810000,$60000241,$7fff8242,$3d41ff84
-	dc.l	$241ff22e,$d040ff84,$608af22e,$d080ff90
-	dc.l	$f22e9000,$ff5cf23c,$88000000,$0000f22e
-	dc.l	$4824ff84,$f201a800,$f23c9000,$00000000
-	dc.l	$83aeff64,$f2000098,$f23c58b8,$0001f292
-	dc.l	$fe44f294,$ff14f22e,$d040ff90,$42810001
-	dc.l	$0010f201,$9000f23c,$88000000,$0000f22e
-	dc.l	$48a4ff84,$f23c9000,$00000000,$f2000498
-	dc.l	$f23c58b8,$0001f293,$fe0c6000,$fedc323b
-	dc.l	$120a4efb,$10064afc,$0030fd7a,$00720078
-	dc.l	$0060fd7a,$00660000,$00000078,$006c0078
-	dc.l	$00600078,$00660000,$0000007e,$007e006c
-	dc.l	$0060007e,$00660000,$00000060,$00600060
-	dc.l	$00600060,$00660000,$0000fd7a,$00720078
-	dc.l	$0060fd7a,$00660000,$00000066,$00660066
-	dc.l	$00660066,$00660000,$000060ff,$ffffd6d2
-	dc.l	$60ffffff,$d6cc60ff,$ffffd74a,$60ffffff
-	dc.l	$f0ce60ff,$fffff09c,$60ffffff,$f0f40200
-	dc.l	$00300000,$00406008,$02000030,$00000080
-	dc.l	$2d40ff5c,$4241122e,$ff4fe709,$822eff4e
-	dc.l	$6600024c,$61ffffff,$d4b2f22e,$d080ff90
-	dc.l	$f23c8800,$00000000,$f22e9000,$ff5cf22e
-	dc.l	$4822ff84,$f23c9000,$00000000,$f201a800
-	dc.l	$83aeff64,$f281003c,$2f02f227,$e001322e
-	dc.l	$ff5eec09,$34170282,$00007fff,$9480b4bb
-	dc.l	$14246c38,$b4bb142a,$6d0000b8,$67000184
-	dc.l	$32170241,$80008242,$3e81f21f,$d080241f
-	dc.l	$4e754e75,$00007fff,$0000407f,$000043ff
-	dc.l	$00000000,$00003f81,$00003c01,$00ae0000
-	dc.l	$1048ff64,$122eff62,$02010013,$6624dffc
-	dc.l	$0000000c,$082e0003,$ff6456c1,$202eff5c
-	dc.l	$61ffffff,$dc7a812e,$ff64f210,$d080241f
-	dc.l	$4e75122e,$ff5c0201,$00c0661a,$32170241
-	dc.l	$80000482,$00006000,$02427fff,$82423e81
-	dc.l	$f21fd040,$60bef22e,$d080ff90,$222eff5c
-	dc.l	$02010030,$f2019000,$f22e4822,$ff84f23c
-	dc.l	$90000000,$0000dffc,$0000000c,$f227e001
-	dc.l	$60ba08ee,$0003ff66,$dffc0000,$000cf22e
-	dc.l	$d080ff90,$f23c9000,$00000010,$f23c8800
-	dc.l	$00000000,$f22e4822,$ff84f23c,$90000000
-	dc.l	$0000f201,$a80083ae,$ff64122e,$ff620201
-	dc.l	$000b6622,$f22ef080,$ff8441ee,$ff84222e
-	dc.l	$ff5c61ff,$ffffdaca,$812eff64,$f22ed080
-	dc.l	$ff84241f,$4e75f22e,$d040ff90,$222eff5c
-	dc.l	$020100c0,$664ef22e,$9000ff5c,$f23c8800
-	dc.l	$00000000,$f22e48a2,$ff84f23c,$90000000
-	dc.l	$0000f22e,$f040ff84,$322eff84,$24010281
-	dc.l	$00007fff,$02428000,$92800681,$00006000
-	dc.l	$02417fff,$82423d41,$ff84f22e,$d040ff84
-	dc.l	$6000ff82,$222eff5c,$02010030,$f2019000
-	dc.l	$60aa222e,$ff5c0201,$00c06700,$fe74222f
-	dc.l	$00040c81,$80000000,$6600fe66,$4aaf0008
-	dc.l	$6600fe5e,$082e0001,$ff666700,$fe54f22e
-	dc.l	$d040ff90,$222eff5c,$020100c0,$00010010
-	dc.l	$f2019000,$f23c8800,$00000000,$f22e48a2
-	dc.l	$ff84f23c,$90000000,$0000f200,$0018f200
-	dc.l	$0498f200,$0438f292,$feca6000,$fe14323b
-	dc.l	$120a4efb,$10064afc,$0030fdaa,$00e4011c
-	dc.l	$0060fdaa,$00660000,$000000bc,$006c011c
-	dc.l	$006000bc,$00660000,$00000130,$0130010c
-	dc.l	$00600130,$00660000,$00000060,$00600060
-	dc.l	$00600060,$00660000,$0000fdaa,$00e4011c
-	dc.l	$0060fdaa,$00660000,$00000066,$00660066
-	dc.l	$00660066,$00660000,$000060ff,$ffffd3d2
-	dc.l	$60ffffff,$d3cc1028,$00001229,$0000b101
-	dc.l	$6b000016,$4a006b2e,$f23c4400,$00000000
-	dc.l	$1d7c0004,$ff644e75,$122eff5f,$02010030
-	dc.l	$0c010020,$6710f23c,$44000000,$00001d7c
-	dc.l	$0004ff64,$4e75f23c,$44008000,$00001d7c
-	dc.l	$000cff64,$4e753d68,$0000ff84,$2d680004
-	dc.l	$ff882d68,$0008ff8c,$61ffffff,$d27e426e
-	dc.l	$ff9042ae,$ff9442ae,$ff986000,$fcce3d69
-	dc.l	$0000ff90,$2d690004,$ff942d69,$0008ff98
-	dc.l	$61ffffff,$d302426e,$ff8442ae,$ff8842ae
-	dc.l	$ff8c6000,$fca61028,$00001229,$0000b300
-	dc.l	$6bffffff,$d3a0f228,$d0800000,$4a280000
-	dc.l	$6a1c1d7c,$000aff64,$4e75f229,$d0800000
-	dc.l	$4a290000,$6a081d7c,$000aff64,$4e751d7c
-	dc.l	$0002ff64,$4e750200,$00300000,$00406008
-	dc.l	$02000030,$00000080,$2d40ff5c,$4241122e
-	dc.l	$ff4fe709,$822eff4e,$6600024c,$61ffffff
-	dc.l	$d0eaf22e,$d080ff90,$f23c8800,$00000000
-	dc.l	$f22e9000,$ff5cf22e,$4828ff84,$f23c9000
-	dc.l	$00000000,$f201a800,$83aeff64,$f281003c
-	dc.l	$2f02f227,$e001322e,$ff5eec09,$34170282
-	dc.l	$00007fff,$9480b4bb,$14246c38,$b4bb142a
-	dc.l	$6d0000b8,$67000184,$32170241,$80008242
-	dc.l	$3e81f21f,$d080241f,$4e754e75,$00007fff
-	dc.l	$0000407f,$000043ff,$00000000,$00003f81
-	dc.l	$00003c01,$00ae0000,$1048ff64,$122eff62
-	dc.l	$02010013,$6624dffc,$0000000c,$082e0003
-	dc.l	$ff6456c1,$202eff5c,$61ffffff,$d8b2812e
-	dc.l	$ff64f210,$d080241f,$4e75122e,$ff5c0201
-	dc.l	$00c0661a,$32170241,$80000482,$00006000
-	dc.l	$02427fff,$82423e81,$f21fd040,$60bef22e
-	dc.l	$d080ff90,$222eff5c,$02010030,$f2019000
-	dc.l	$f22e4828,$ff84f23c,$90000000,$0000dffc
-	dc.l	$0000000c,$f227e001,$60ba08ee,$0003ff66
-	dc.l	$dffc0000,$000cf22e,$d080ff90,$f23c9000
-	dc.l	$00000010,$f23c8800,$00000000,$f22e4828
-	dc.l	$ff84f23c,$90000000,$0000f201,$a80083ae
-	dc.l	$ff64122e,$ff620201,$000b6622,$f22ef080
-	dc.l	$ff8441ee,$ff84222e,$ff5c61ff,$ffffd702
-	dc.l	$812eff64,$f22ed080,$ff84241f,$4e75f22e
-	dc.l	$d040ff90,$222eff5c,$020100c0,$664ef22e
-	dc.l	$9000ff5c,$f23c8800,$00000000,$f22e48a8
-	dc.l	$ff84f23c,$90000000,$0000f22e,$f040ff84
-	dc.l	$322eff84,$24010281,$00007fff,$02428000
-	dc.l	$92800681,$00006000,$02417fff,$82423d41
-	dc.l	$ff84f22e,$d040ff84,$6000ff82,$222eff5c
-	dc.l	$02010030,$f2019000,$60aa222e,$ff5c0201
-	dc.l	$00c06700,$fe74222f,$00040c81,$80000000
-	dc.l	$6600fe66,$4aaf0008,$6600fe5e,$082e0001
-	dc.l	$ff666700,$fe54f22e,$d040ff90,$222eff5c
-	dc.l	$020100c0,$00010010,$f2019000,$f23c8800
-	dc.l	$00000000,$f22e48a8,$ff84f23c,$90000000
-	dc.l	$0000f200,$0018f200,$0498f200,$0438f292
-	dc.l	$feca6000,$fe14323b,$120a4efb,$10064afc
-	dc.l	$0030fdaa,$00e2011a,$0060fdaa,$00660000
-	dc.l	$000000ba,$006c011a,$006000ba,$00660000
-	dc.l	$00000130,$0130010a,$00600130,$00660000
-	dc.l	$00000060,$00600060,$00600060,$00660000
-	dc.l	$0000fdaa,$00e2011a,$0060fdaa,$00660000
-	dc.l	$00000066,$00660066,$00660066,$00660000
-	dc.l	$000060ff,$ffffd00a,$60ffffff,$d0041028
-	dc.l	$00001229,$0000b300,$6a144a00,$6b2ef23c
-	dc.l	$44000000,$00001d7c,$0004ff64,$4e75122e
-	dc.l	$ff5f0201,$00300c01,$00206710,$f23c4400
-	dc.l	$00000000,$1d7c0004,$ff644e75,$f23c4400
-	dc.l	$80000000,$1d7c000c,$ff644e75,$3d680000
-	dc.l	$ff842d68,$0004ff88,$2d680008,$ff8c61ff
-	dc.l	$ffffceb8,$426eff90,$42aeff94,$42aeff98
-	dc.l	$6000fcd0,$3d690000,$ff902d69,$0004ff94
-	dc.l	$2d690008,$ff9861ff,$ffffcf3c,$426eff84
-	dc.l	$42aeff88,$42aeff8c,$6000fca8,$10280000
-	dc.l	$12290000,$b3006aff,$ffffcfda,$f228d080
-	dc.l	$0000f200,$001af293,$001e1d7c,$000aff64
-	dc.l	$4e75f229,$d0800000,$4a290000,$6a081d7c
-	dc.l	$000aff64,$4e751d7c,$0002ff64,$4e750200
-	dc.l	$00300000,$00406008,$02000030,$00000080
-	dc.l	$2d40ff5c,$4241122e,$ff4e6600,$02744a28
-	dc.l	$00006bff,$ffffcf7e,$020000c0,$6648f22e
-	dc.l	$9000ff5c,$f23c8800,$00000000,$f2104804
-	dc.l	$f201a800,$83aeff64,$4e754a28,$00006bff
-	dc.l	$ffffcf52,$020000c0,$661c3d68,$0000ff84
-	dc.l	$2d680004,$ff882d68,$0008ff8c,$61ffffff
-	dc.l	$ce046000,$003e0c00,$00406600,$00843d68
-	dc.l	$0000ff84,$2d680004,$ff882d68,$0008ff8c
-	dc.l	$61ffffff,$cde00c80,$0000007e,$67000098
-	dc.l	$6e00009e,$0c80ffff,$ff806700,$01a46d00
-	dc.l	$0120f23c,$88000000,$0000f22e,$9000ff5c
-	dc.l	$f22e4804,$ff84f201,$a800f23c,$90000000
-	dc.l	$000083ae,$ff642f02,$f22ef080,$ff84322e
-	dc.l	$ff842401,$02810000,$7fff9280,$02428000
-	dc.l	$84413d42,$ff84241f,$f22ed080,$ff844e75
-	dc.l	$3d680000,$ff842d68,$0004ff88,$2d680008
-	dc.l	$ff8c61ff,$ffffcd5e,$0c800000,$03fe6700
-	dc.l	$00166e1c,$0c80ffff,$fc006700,$01246d00
-	dc.l	$00a06000,$ff7e082e,$0000ff85,$6600ff74
-	dc.l	$08ee0003,$ff66f23c,$90000000,$0010f23c
-	dc.l	$88000000,$0000f22e,$4804ff84,$f201a800
-	dc.l	$f23c9000,$00000000,$83aeff64,$122eff62
-	dc.l	$0201000b,$6620f22e,$f080ff84,$41eeff84
-	dc.l	$222eff5c,$61ffffff,$d338812e,$ff64f22e
-	dc.l	$d080ff84,$4e752d6e,$ff88ff94,$2d6eff8c
-	dc.l	$ff98322e,$ff842f02,$24010281,$00007fff
-	dc.l	$02428000,$92800681,$00006000,$02417fff
-	dc.l	$82423d41,$ff90f22e,$d040ff90,$241f60a6
-	dc.l	$f23c8800,$00000000,$f22e9000,$ff5cf22e
-	dc.l	$4804ff84,$f23c9000,$00000000,$f201a800
-	dc.l	$83aeff64,$00ae0000,$1048ff64,$122eff62
-	dc.l	$02010013,$661c082e,$0003ff64,$56c1202e
-	dc.l	$ff5c61ff,$ffffd3a8,$812eff64,$f210d080
-	dc.l	$4e752f02,$322eff84,$24010281,$00007fff
-	dc.l	$02428000,$92800481,$00006000,$02417fff
-	dc.l	$82423d41,$ff84f22e,$d040ff84,$241f60b6
-	dc.l	$082e0000,$ff856600,$ff78f23c,$88000000
-	dc.l	$0000f22e,$9000ff5c,$f22e4804,$ff84f201
-	dc.l	$a800f23c,$90000000,$000083ae,$ff64f200
-	dc.l	$0080f23c,$58b80001,$f293ff6a,$6000fe48
-	dc.l	$0c010004,$6700fdb4,$0c010001,$67160c01
-	dc.l	$00026736,$0c010005,$67ffffff,$cc8c60ff
-	dc.l	$ffffcc9a,$4a280000,$6b10f23c,$44000000
-	dc.l	$00001d7c,$0004ff64,$4e75f23c,$44008000
-	dc.l	$00001d7c,$000cff64,$4e754a28,$00006bff
-	dc.l	$ffffccc2,$f228d080,$00001d7c,$0002ff64
-	dc.l	$4e75303b,$12064efb,$00020020,$0026002c
-	dc.l	$00300034,$0038003c,$00400044,$004a0050
-	dc.l	$00540058,$005c0060,$0064202e,$ff9c4e75
-	dc.l	$202effa0,$4e752002,$4e752003,$4e752004
-	dc.l	$4e752005,$4e752006,$4e752007,$4e75202e
-	dc.l	$ffa44e75,$202effa8,$4e75200a,$4e75200b
-	dc.l	$4e75200c,$4e75200d,$4e752016,$4e75202e
-	dc.l	$ffd84e75,$323b1206,$4efb1002,$00100016
-	dc.l	$001c0020,$00240028,$002c0030,$2d40ff9c
-	dc.l	$4e752d40,$ffa04e75,$24004e75,$26004e75
-	dc.l	$28004e75,$2a004e75,$2c004e75,$2e004e75
-	dc.l	$323b1206,$4efb1002,$00100016,$001c0020
-	dc.l	$00240028,$002c0030,$3d40ff9e,$4e753d40
-	dc.l	$ffa24e75,$34004e75,$36004e75,$38004e75
-	dc.l	$3a004e75,$3c004e75,$3e004e75,$323b1206
-	dc.l	$4efb1002,$00100016,$001c0020,$00240028
-	dc.l	$002c0030,$1d40ff9f,$4e751d40,$ffa34e75
-	dc.l	$14004e75,$16004e75,$18004e75,$1a004e75
-	dc.l	$1c004e75,$1e004e75,$323b1206,$4efb1002
-	dc.l	$00100016,$001c0020,$00240028,$002c0030
-	dc.l	$d1aeffa4,$4e75d1ae,$ffa84e75,$d5c04e75
-	dc.l	$d7c04e75,$d9c04e75,$dbc04e75,$d1964e75
-	dc.l	$1d7c0004,$ff4a0c00,$00016706,$d1aeffd8
-	dc.l	$4e7554ae,$ffd84e75,$323b1206,$4efb1002
-	dc.l	$00100016,$001c0020,$00240028,$002c0030
-	dc.l	$91aeffa4,$4e7591ae,$ffa84e75,$95c04e75
-	dc.l	$97c04e75,$99c04e75,$9bc04e75,$91964e75
-	dc.l	$1d7c0008,$ff4a0c00,$00016706,$91aeffd8
-	dc.l	$4e7555ae,$ffd84e75,$303b0206,$4efb0002
-	dc.l	$00100028,$0040004c,$00580064,$0070007c
-	dc.l	$2d6effdc,$ff6c2d6e,$ffe0ff70,$2d6effe4
-	dc.l	$ff7441ee,$ff6c4e75,$2d6effe8,$ff6c2d6e
-	dc.l	$ffecff70,$2d6efff0,$ff7441ee,$ff6c4e75
-	dc.l	$f22ef020,$ff6c41ee,$ff6c4e75,$f22ef010
-	dc.l	$ff6c41ee,$ff6c4e75,$f22ef008,$ff6c41ee
-	dc.l	$ff6c4e75,$f22ef004,$ff6c41ee,$ff6c4e75
-	dc.l	$f22ef002,$ff6c41ee,$ff6c4e75,$f22ef001
-	dc.l	$ff6c41ee,$ff6c4e75,$303b0206,$4efb0002
-	dc.l	$00100028,$0040004c,$00580064,$0070007c
-	dc.l	$2d6effdc,$ff782d6e,$ffe0ff7c,$2d6effe4
-	dc.l	$ff8041ee,$ff784e75,$2d6effe8,$ff782d6e
-	dc.l	$ffecff7c,$2d6efff0,$ff8041ee,$ff784e75
-	dc.l	$f22ef020,$ff7841ee,$ff784e75,$f22ef010
-	dc.l	$ff7841ee,$ff784e75,$f22ef008,$ff7841ee
-	dc.l	$ff784e75,$f22ef004,$ff7841ee,$ff784e75
-	dc.l	$f22ef002,$ff7841ee,$ff784e75,$f22ef001
-	dc.l	$ff7841ee,$ff784e75,$303b0206,$4efb0002
-	dc.l	$00100018,$0020002a,$0034003e,$00480052
-	dc.l	$f22ef080,$ffdc4e75,$f22ef080,$ffe84e75
-	dc.l	$f227e001,$f21fd020,$4e75f227,$e001f21f
-	dc.l	$d0104e75,$f227e001,$f21fd008,$4e75f227
-	dc.l	$e001f21f,$d0044e75,$f227e001,$f21fd002
-	dc.l	$4e75f227,$e001f21f,$d0014e75,$700c61ff
-	dc.l	$ffffbace,$43eeff6c,$700c61ff,$ffffa0d8
-	dc.l	$4a8166ff,$00000a14,$e9ee004f,$ff6c0c40
-	dc.l	$7fff6602,$4e75102e,$ff6f0200,$000f660e
-	dc.l	$4aaeff70,$66084aae,$ff746602,$4e7541ee
-	dc.l	$ff6c61ff,$0000001c,$f22ef080,$ff6c4e75
-	dc.l	$00000000,$02030203,$02030302,$03020203
-	dc.l	$2d680000,$ff842d68,$0004ff88,$2d680008
-	dc.l	$ff8c41ee,$ff8448e7,$3c00f227,$e0017402
-	dc.l	$76042810,$42814c3c,$10010000,$000ae9c4
-	dc.l	$08c4d280,$580351ca,$ffee0804,$001e6702
-	dc.l	$44810481,$00000010,$6c0e4481,$00844000
-	dc.l	$00000090,$40000000,$2f017201,$f23c4400
-	dc.l	$00000000,$e9d00704,$f2005822,$28301c00
-	dc.l	$76007407,$f23c4423,$41200000,$e9c408c4
-	dc.l	$f2005822,$580351ca,$ffec5281,$0c810000
-	dc.l	$00026fd8,$0810001f,$6704f200,$001a2217
-	dc.l	$0c810000,$001b6f00,$00e40810,$001e6674
-	dc.l	$42812810,$e9c40704,$66245281,$7a012830
-	dc.l	$5c006608,$50815285,$28305c00,$42837407
-	dc.l	$e9c408c4,$66085883,$528151ca,$fff42001
-	dc.l	$22179280,$6c104481,$28100084,$40000000
-	dc.l	$00904000,$000043fb,$01700000,$06664283
-	dc.l	$f23c4480,$3f800000,$7403e280,$6406f231
-	dc.l	$48a33800,$06830000,$000c4a80,$66ecf200
-	dc.l	$04236068,$42817a02,$28305c00,$66085385
-	dc.l	$50812830,$5c00761c,$7407e9c4,$08c46608
-	dc.l	$59835281,$51cafff4,$20012217,$92806e10
-	dc.l	$44812810,$0284bfff,$ffff0290,$bfffffff
-	dc.l	$43fb0170,$000005fc,$4283f23c,$44803f80
-	dc.l	$00007403,$e2806406,$f23148a3,$38000683
-	dc.l	$0000000c,$4a8066ec,$f2000420,$262eff60
-	dc.l	$e9c32682,$2810e582,$e9c40002,$d48043fa
-	dc.l	$fe501031,$28004283,$efc30682,$f2039000
-	dc.l	$e280640a,$43fb0170,$00000644,$6016e280
-	dc.l	$640a43fb,$01700000,$06d26008,$43fb0170
-	dc.l	$00000590,$20016a08,$44800090,$40000000
-	dc.l	$4283f23c,$44803f80,$0000e280,$6406f231
-	dc.l	$48a33800,$06830000,$000c4a80,$66ec0810
-	dc.l	$001e6706,$f2000420,$6004f200,$0423f200
-	dc.l	$a8000880,$00096706,$006e0108,$ff66588f
-	dc.l	$f21fd040,$4cdf003c,$f23c9000,$00000000
-	dc.l	$f23c8800,$00000000,$4e753ffd,$00009a20
-	dc.l	$9a84fbcf,$f7980000,$00003ffd,$00009a20
-	dc.l	$9a84fbcf,$f7990000,$00003f80,$00000000
-	dc.l	$00000000,$00000000,$00004000,$00000000
-	dc.l	$00000000,$00000000,$00004120,$00000000
-	dc.l	$00000000,$00000000,$0000459a,$28000000
-	dc.l	$00000000,$00000000,$00000000,$00000303
-	dc.l	$02020302,$02030203,$030248e7,$3f20f227
-	dc.l	$e007f23c,$90000000,$00202d50,$ff582e00
-	dc.l	$422eff50,$0c2e0004,$ff4e6600,$00303010
-	dc.l	$02407fff,$22280004,$24280008,$5340e38a
-	dc.l	$e3914a81,$6cf64a40,$6e0450ee,$ff500240
-	dc.l	$7fff3080,$21410004,$21420008,$2d50ff90
-	dc.l	$2d680004,$ff942d68,$0008ff98,$02ae7fff
-	dc.l	$ffffff90,$4a2eff50,$67082c3c,$ffffecbb
-	dc.l	$6038302e,$ff903d7c,$3fffff90,$f22e4800
-	dc.l	$ff900440,$3ffff200,$5022f23a,$4428ff1c
-	dc.l	$f293000e,$f23a4823,$ff02f206,$6000600a
-	dc.l	$f23a4823,$fee6f206,$6000f23c,$88000000
-	dc.l	$00004245,$4a876f04,$28076006,$28069887
-	dc.l	$52844a84,$6f180c84,$00000011,$6f127811
-	dc.l	$4a876f0c,$00ae0000,$2080ff64,$60027801
-	dc.l	$4a876e06,$be866d02,$2c072006,$52809084
-	dc.l	$48454245,$42424a80,$6c145245,$0c80ffff
-	dc.l	$ecd46e08,$06800000,$00187418,$4480f23a
-	dc.l	$4480fe98,$e9ee1682,$ff60e349,$d245e349
-	dc.l	$4aaeff58,$6c025281,$45fafec0,$16321800
-	dc.l	$e98bf203,$9000e88b,$4a03660a,$43fb0170
-	dc.l	$00000370,$6016e20b,$640a43fb,$01700000
-	dc.l	$03fe6008,$43fb0170,$00000490,$4283e288
-	dc.l	$6406f231,$48a33800,$06830000,$000c4a80
-	dc.l	$66ecf23c,$88000000,$0000f23c,$90000000
-	dc.l	$0010f210,$4800f200,$00184a45,$6608f200
-	dc.l	$04206000,$008e4a2e,$ff506700,$0072f227
-	dc.l	$e0023617,$02437fff,$00508000,$d6500443
-	dc.l	$3fffd669,$00240443,$3fffd669,$00300443
-	dc.l	$3fff6b00,$00480257,$80008757,$02507fff
-	dc.l	$2f280008,$2f280004,$2f3c3fff,$0000f21f
-	dc.l	$d080f21f,$48232f29,$002c2f29,$00282f3c
-	dc.l	$3fff0000,$2f290038,$2f290034,$2f3c3fff
-	dc.l	$0000f21f,$4823f21f,$48236016,$60fe4a42
-	dc.l	$670cf229,$48230024,$f2294823,$0030f200
-	dc.l	$0423f200,$a800f22e,$6800ff90,$45eeff90
-	dc.l	$08000009,$670e00aa,$00000001,$0008f22e
-	dc.l	$4800ff90,$2d6eff60,$ff5402ae,$00000030
-	dc.l	$ff6048e7,$c0c02f2e,$ff542f2e,$ff5841ee
-	dc.l	$ff90f210,$68004aae,$ff586c06,$00908000
-	dc.l	$00002f2e,$ff64f22e,$9000ff60,$f23c8800
-	dc.l	$00000000,$f22e4801,$ff90f200,$a800816e
-	dc.l	$ff661d57,$ff64588f,$2d5fff58,$2d5fff54
-	dc.l	$4cdf0303,$2d6eff58,$ff902d6e,$ff54ff60
-	dc.l	$48454a45,$66ff0000,$0086f23a,$4500fcec
-	dc.l	$20045380,$4283e288,$6406f231,$49233800
-	dc.l	$06830000,$000c4a80,$66ec4a2e,$ff50670a
-	dc.l	$f2000018,$60ff0000,$0028f200,$0018f200
-	dc.l	$0838f293,$001a5386,$3a3c0001,$f23c9000
-	dc.l	$00000020,$f23a4523,$fcc26000,$fda8f23a
-	dc.l	$4523fcb8,$f2000838,$f294005c,$f292000c
-	dc.l	$f23a4420,$fca65286,$604c5286,$3a3c0001
-	dc.l	$f23c9000,$00000020,$6000fd7a,$f23a4500
-	dc.l	$fc6a2004,$4283e288,$6406f231,$49233800
-	dc.l	$06830000,$000c4a80,$66ecf200,$0018f200
-	dc.l	$0838f28e,$0012f23a,$4420fc60,$52865284
-	dc.l	$f23a4523,$fc56f23c,$90000000,$0010f200
-	dc.l	$082041ee,$ff84f210,$68002428,$00042628
-	dc.l	$000842a8,$000442a8,$00082010,$48406714
-	dc.l	$04800000,$3ffd4a80,$6e0a4480,$e28ae293
-	dc.l	$51c8fffa,$4a826604,$4a836710,$42810683
-	dc.l	$00000080,$d5810283,$ffffff80,$20045688
-	dc.l	$61ff0000,$02b04a2e,$ff506728,$f200003a
-	dc.l	$f281000c,$f2064000,$f2000018,$602e4a87
-	dc.l	$6d08f23a,$4400fbe4,$6022f206,$4000f200
-	dc.l	$00186018,$f200003a,$f28e000a,$f23a4400
-	dc.l	$fb9a6008,$f2064000,$f2000018,$f2294820
-	dc.l	$0018f22e,$6800ff90,$242a0004,$262a0008
-	dc.l	$3012670e,$04403ffd,$4440e28a,$e29351c8
-	dc.l	$fffa4281,$06830000,$0080d581,$0283ffff
-	dc.l	$ff807004,$41eeff54,$61ff0000,$0228202e
-	dc.l	$ff54720c,$e2a8efee,$010cff84,$e2a8efee
-	dc.l	$0404ff84,$4a006708,$00ae0000,$2080ff64
-	dc.l	$4280022e,$000fff84,$4aaeff58,$6c027002
-	dc.l	$4a866c02,$5280efee,$0002ff84,$f23c8800
-	dc.l	$00000000,$f21fd0e0,$4cdf04fc,$4e754002
-	dc.l	$0000a000,$00000000,$00004005,$0000c800
-	dc.l	$00000000,$0000400c,$00009c40,$00000000
-	dc.l	$00004019,$0000bebc,$20000000,$00004034
-	dc.l	$00008e1b,$c9bf0400,$00004069,$00009dc5
-	dc.l	$ada82b70,$b59e40d3,$0000c278,$1f49ffcf
-	dc.l	$a6d541a8,$000093ba,$47c980e9,$8ce04351
-	dc.l	$0000aa7e,$ebfb9df9,$de8e46a3,$0000e319
-	dc.l	$a0aea60e,$91c74d48,$0000c976,$75868175
-	dc.l	$0c175a92,$00009e8b,$3b5dc53d,$5de57525
-	dc.l	$0000c460,$52028a20,$979b4002,$0000a000
-	dc.l	$00000000,$00004005,$0000c800,$00000000
-	dc.l	$0000400c,$00009c40,$00000000,$00004019
-	dc.l	$0000bebc,$20000000,$00004034,$00008e1b
-	dc.l	$c9bf0400,$00004069,$00009dc5,$ada82b70
-	dc.l	$b59e40d3,$0000c278,$1f49ffcf,$a6d641a8
-	dc.l	$000093ba,$47c980e9,$8ce04351,$0000aa7e
-	dc.l	$ebfb9df9,$de8e46a3,$0000e319,$a0aea60e
-	dc.l	$91c74d48,$0000c976,$75868175,$0c185a92
-	dc.l	$00009e8b,$3b5dc53d,$5de57525,$0000c460
-	dc.l	$52028a20,$979b4002,$0000a000,$00000000
-	dc.l	$00004005,$0000c800,$00000000,$0000400c
-	dc.l	$00009c40,$00000000,$00004019,$0000bebc
-	dc.l	$20000000,$00004034,$00008e1b,$c9bf0400
-	dc.l	$00004069,$00009dc5,$ada82b70,$b59d40d3
-	dc.l	$0000c278,$1f49ffcf,$a6d541a8,$000093ba
-	dc.l	$47c980e9,$8cdf4351,$0000aa7e,$ebfb9df9
-	dc.l	$de8d46a3,$0000e319,$a0aea60e,$91c64d48
-	dc.l	$0000c976,$75868175,$0c175a92,$00009e8b
-	dc.l	$3b5dc53d,$5de47525,$0000c460,$52028a20
-	dc.l	$979a48e7,$ff007e01,$53802802,$2a03e9c2
-	dc.l	$1003e782,$e9c36003,$e7838486,$e385e394
-	dc.l	$4846d346,$d6854e71,$d5844e71,$d3464846
-	dc.l	$4a476712,$4847e947,$de4110c7,$48474247
-	dc.l	$51c8ffc8,$60124847,$3e014847,$524751c8
-	dc.l	$ffba4847,$e94f10c7,$4cdf00ff,$4e757001
-	dc.l	$610000d6,$3d7c0121,$000a6000,$007e7002
-	dc.l	$610000c6,$3d7c0141,$000a606e,$70046100
-	dc.l	$00b83d7c,$0101000a,$60607008,$610000aa
-	dc.l	$3d7c0161,$000a6052,$700c6100,$009c3d7c
-	dc.l	$0161000a,$60447001,$6100008e,$3d7c00a1
-	dc.l	$000a6036,$70026100,$00803d7c,$00c1000a
-	dc.l	$60287004,$61000072,$3d7c0081,$000a601a
-	dc.l	$70086100,$00643d7c,$00e1000a,$600c700c
-	dc.l	$61000056,$3d7c00e1,$000a2d6e,$ff680006
-	dc.l	$f22ed0c0,$ffdcf22e,$9c00ff60,$4cee0303
-	dc.l	$ff9c4e5e,$2f172f6f,$00080004,$2f6f000c
-	dc.l	$00082f7c,$00000001,$000c3f6f,$0006000c
-	dc.l	$3f7c4008,$00060817,$00056706,$08ef0002
-	dc.l	$000d60ff,$ffff95f4,$122eff41,$02010038
-	dc.l	$0c010018,$6700000c,$0c010020,$67000060
-	dc.l	$4e75122e,$ff410241,$0007323b,$12064efb
-	dc.l	$10020010,$0016001c,$00200024,$0028002c
-	dc.l	$003091ae,$ffa44e75,$91aeffa8,$4e7595c0
-	dc.l	$4e7597c0,$4e7599c0,$4e759bc0,$4e759196
-	dc.l	$4e750c2e,$0030000a,$6612082e,$00050004
-	dc.l	$660a4e7a,$880091c0,$4e7b8800,$4e754480
-	dc.l	$60a051fc,$00000000,$00000000,$00000000
diff --git a/ANDROID_3.4.5/arch/m68k/ifpsp060/src/README-SRC b/ANDROID_3.4.5/arch/m68k/ifpsp060/src/README-SRC
deleted file mode 100644
index 6be5cff2..00000000
--- a/ANDROID_3.4.5/arch/m68k/ifpsp060/src/README-SRC
+++ /dev/null
@@ -1,12 +0,0 @@
-This is the original source code from Motorola for the 68060 processor
-support code, providing emulation for rarely used m68k instructions
-not implemented in the 68060 silicon.
-
-The code provided here will not assemble out of the box using the GNU
-assembler, however it is being included in order to comply with the
-GNU General Public License.
-
-You don't need to actually assemble these files in order to compile a
-workin m68k kernel, the precompiled .sa files in arch/m68k/ifpsp060
-are sufficient and were generated from these source files by
-Motorola.
diff --git a/ANDROID_3.4.5/arch/m68k/ifpsp060/src/fplsp.S b/ANDROID_3.4.5/arch/m68k/ifpsp060/src/fplsp.S
deleted file mode 100644
index 3b7ea2dc..00000000
--- a/ANDROID_3.4.5/arch/m68k/ifpsp060/src/fplsp.S
+++ /dev/null
@@ -1,10980 +0,0 @@
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-MOTOROLA MICROPROCESSOR & MEMORY TECHNOLOGY GROUP
-M68000 Hi-Performance Microprocessor Division
-M68060 Software Package
-Production Release P1.00 -- October 10, 1994
-
-M68060 Software Package Copyright © 1993, 1994 Motorola Inc.  All rights reserved.
-
-THE SOFTWARE is provided on an "AS IS" basis and without warranty.
-To the maximum extent permitted by applicable law,
-MOTOROLA DISCLAIMS ALL WARRANTIES WHETHER EXPRESS OR IMPLIED,
-INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
-and any warranty against infringement with regard to the SOFTWARE
-(INCLUDING ANY MODIFIED VERSIONS THEREOF) and any accompanying written materials.
-
-To the maximum extent permitted by applicable law,
-IN NO EVENT SHALL MOTOROLA BE LIABLE FOR ANY DAMAGES WHATSOEVER
-(INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS,
-BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, OR OTHER PECUNIARY LOSS)
-ARISING OF THE USE OR INABILITY TO USE THE SOFTWARE.
-Motorola assumes no responsibility for the maintenance and support of the SOFTWARE.
-
-You are hereby granted a copyright license to use, modify, and distribute the SOFTWARE
-so long as this entire notice is retained without alteration in any modified and/or
-redistributed versions, and that such modified versions are clearly identified as such.
-No licenses are granted by implication, estoppel or otherwise under any patents
-or trademarks of Motorola, Inc.
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-#
-# lfptop.s:
-#	This file is appended to the top of the 060ILSP package
-# and contains the entry points into the package. The user, in
-# effect, branches to one of the branch table entries located here.
-#
-
-	bra.l	_facoss_
-	short	0x0000
-	bra.l	_facosd_
-	short	0x0000
-	bra.l	_facosx_
-	short	0x0000
-
-	bra.l	_fasins_
-	short	0x0000
-	bra.l	_fasind_
-	short	0x0000
-	bra.l	_fasinx_
-	short	0x0000
-
-	bra.l	_fatans_
-	short	0x0000
-	bra.l	_fatand_
-	short	0x0000
-	bra.l	_fatanx_
-	short	0x0000
-
-	bra.l	_fatanhs_
-	short	0x0000
-	bra.l	_fatanhd_
-	short	0x0000
-	bra.l	_fatanhx_
-	short	0x0000
-
-	bra.l	_fcoss_
-	short	0x0000
-	bra.l	_fcosd_
-	short	0x0000
-	bra.l	_fcosx_
-	short	0x0000
-
-	bra.l	_fcoshs_
-	short	0x0000
-	bra.l	_fcoshd_
-	short	0x0000
-	bra.l	_fcoshx_
-	short	0x0000
-
-	bra.l	_fetoxs_
-	short	0x0000
-	bra.l	_fetoxd_
-	short	0x0000
-	bra.l	_fetoxx_
-	short	0x0000
-
-	bra.l	_fetoxm1s_
-	short	0x0000
-	bra.l	_fetoxm1d_
-	short	0x0000
-	bra.l	_fetoxm1x_
-	short	0x0000
-
-	bra.l	_fgetexps_
-	short	0x0000
-	bra.l	_fgetexpd_
-	short	0x0000
-	bra.l	_fgetexpx_
-	short	0x0000
-
-	bra.l	_fgetmans_
-	short	0x0000
-	bra.l	_fgetmand_
-	short	0x0000
-	bra.l	_fgetmanx_
-	short	0x0000
-
-	bra.l	_flog10s_
-	short	0x0000
-	bra.l	_flog10d_
-	short	0x0000
-	bra.l	_flog10x_
-	short	0x0000
-
-	bra.l	_flog2s_
-	short	0x0000
-	bra.l	_flog2d_
-	short	0x0000
-	bra.l	_flog2x_
-	short	0x0000
-
-	bra.l	_flogns_
-	short	0x0000
-	bra.l	_flognd_
-	short	0x0000
-	bra.l	_flognx_
-	short	0x0000
-
-	bra.l	_flognp1s_
-	short	0x0000
-	bra.l	_flognp1d_
-	short	0x0000
-	bra.l	_flognp1x_
-	short	0x0000
-
-	bra.l	_fmods_
-	short	0x0000
-	bra.l	_fmodd_
-	short	0x0000
-	bra.l	_fmodx_
-	short	0x0000
-
-	bra.l	_frems_
-	short	0x0000
-	bra.l	_fremd_
-	short	0x0000
-	bra.l	_fremx_
-	short	0x0000
-
-	bra.l	_fscales_
-	short	0x0000
-	bra.l	_fscaled_
-	short	0x0000
-	bra.l	_fscalex_
-	short	0x0000
-
-	bra.l	_fsins_
-	short	0x0000
-	bra.l	_fsind_
-	short	0x0000
-	bra.l	_fsinx_
-	short	0x0000
-
-	bra.l	_fsincoss_
-	short	0x0000
-	bra.l	_fsincosd_
-	short	0x0000
-	bra.l	_fsincosx_
-	short	0x0000
-
-	bra.l	_fsinhs_
-	short	0x0000
-	bra.l	_fsinhd_
-	short	0x0000
-	bra.l	_fsinhx_
-	short	0x0000
-
-	bra.l	_ftans_
-	short	0x0000
-	bra.l	_ftand_
-	short	0x0000
-	bra.l	_ftanx_
-	short	0x0000
-
-	bra.l	_ftanhs_
-	short	0x0000
-	bra.l	_ftanhd_
-	short	0x0000
-	bra.l	_ftanhx_
-	short	0x0000
-
-	bra.l	_ftentoxs_
-	short	0x0000
-	bra.l	_ftentoxd_
-	short	0x0000
-	bra.l	_ftentoxx_
-	short	0x0000
-
-	bra.l	_ftwotoxs_
-	short	0x0000
-	bra.l	_ftwotoxd_
-	short	0x0000
-	bra.l	_ftwotoxx_
-	short	0x0000
-
-	bra.l	_fabss_
-	short	0x0000
-	bra.l	_fabsd_
-	short	0x0000
-	bra.l	_fabsx_
-	short	0x0000
-
-	bra.l	_fadds_
-	short	0x0000
-	bra.l	_faddd_
-	short	0x0000
-	bra.l	_faddx_
-	short	0x0000
-
-	bra.l	_fdivs_
-	short	0x0000
-	bra.l	_fdivd_
-	short	0x0000
-	bra.l	_fdivx_
-	short	0x0000
-
-	bra.l	_fints_
-	short	0x0000
-	bra.l	_fintd_
-	short	0x0000
-	bra.l	_fintx_
-	short	0x0000
-
-	bra.l	_fintrzs_
-	short	0x0000
-	bra.l	_fintrzd_
-	short	0x0000
-	bra.l	_fintrzx_
-	short	0x0000
-
-	bra.l	_fmuls_
-	short	0x0000
-	bra.l	_fmuld_
-	short	0x0000
-	bra.l	_fmulx_
-	short	0x0000
-
-	bra.l	_fnegs_
-	short	0x0000
-	bra.l	_fnegd_
-	short	0x0000
-	bra.l	_fnegx_
-	short	0x0000
-
-	bra.l	_fsqrts_
-	short	0x0000
-	bra.l	_fsqrtd_
-	short	0x0000
-	bra.l	_fsqrtx_
-	short	0x0000
-
-	bra.l	_fsubs_
-	short	0x0000
-	bra.l	_fsubd_
-	short	0x0000
-	bra.l	_fsubx_
-	short	0x0000
-
-# leave room for future possible additions
-	align	0x400
-
-#
-# This file contains a set of define statements for constants
-# in order to promote readability within the corecode itself.
-#
-
-set LOCAL_SIZE,		192			# stack frame size(bytes)
-set LV,			-LOCAL_SIZE		# stack offset
-
-set EXC_SR,		0x4			# stack status register
-set EXC_PC,		0x6			# stack pc
-set EXC_VOFF,		0xa			# stacked vector offset
-set EXC_EA,		0xc			# stacked <ea>
-
-set EXC_FP,		0x0			# frame pointer
-
-set EXC_AREGS,		-68			# offset of all address regs
-set EXC_DREGS,		-100			# offset of all data regs
-set EXC_FPREGS,		-36			# offset of all fp regs
-
-set EXC_A7,		EXC_AREGS+(7*4)		# offset of saved a7
-set OLD_A7,		EXC_AREGS+(6*4)		# extra copy of saved a7
-set EXC_A6,		EXC_AREGS+(6*4)		# offset of saved a6
-set EXC_A5,		EXC_AREGS+(5*4)
-set EXC_A4,		EXC_AREGS+(4*4)
-set EXC_A3,		EXC_AREGS+(3*4)
-set EXC_A2,		EXC_AREGS+(2*4)
-set EXC_A1,		EXC_AREGS+(1*4)
-set EXC_A0,		EXC_AREGS+(0*4)
-set EXC_D7,		EXC_DREGS+(7*4)
-set EXC_D6,		EXC_DREGS+(6*4)
-set EXC_D5,		EXC_DREGS+(5*4)
-set EXC_D4,		EXC_DREGS+(4*4)
-set EXC_D3,		EXC_DREGS+(3*4)
-set EXC_D2,		EXC_DREGS+(2*4)
-set EXC_D1,		EXC_DREGS+(1*4)
-set EXC_D0,		EXC_DREGS+(0*4)
-
-set EXC_FP0,		EXC_FPREGS+(0*12)	# offset of saved fp0
-set EXC_FP1,		EXC_FPREGS+(1*12)	# offset of saved fp1
-set EXC_FP2,		EXC_FPREGS+(2*12)	# offset of saved fp2 (not used)
-
-set FP_SCR1,		LV+80			# fp scratch 1
-set FP_SCR1_EX,		FP_SCR1+0
-set FP_SCR1_SGN,	FP_SCR1+2
-set FP_SCR1_HI,		FP_SCR1+4
-set FP_SCR1_LO,		FP_SCR1+8
-
-set FP_SCR0,		LV+68			# fp scratch 0
-set FP_SCR0_EX,		FP_SCR0+0
-set FP_SCR0_SGN,	FP_SCR0+2
-set FP_SCR0_HI,		FP_SCR0+4
-set FP_SCR0_LO,		FP_SCR0+8
-
-set FP_DST,		LV+56			# fp destination operand
-set FP_DST_EX,		FP_DST+0
-set FP_DST_SGN,		FP_DST+2
-set FP_DST_HI,		FP_DST+4
-set FP_DST_LO,		FP_DST+8
-
-set FP_SRC,		LV+44			# fp source operand
-set FP_SRC_EX,		FP_SRC+0
-set FP_SRC_SGN,		FP_SRC+2
-set FP_SRC_HI,		FP_SRC+4
-set FP_SRC_LO,		FP_SRC+8
-
-set USER_FPIAR,		LV+40			# FP instr address register
-
-set USER_FPSR,		LV+36			# FP status register
-set FPSR_CC,		USER_FPSR+0		# FPSR condition codes
-set FPSR_QBYTE,		USER_FPSR+1		# FPSR qoutient byte
-set FPSR_EXCEPT,	USER_FPSR+2		# FPSR exception status byte
-set FPSR_AEXCEPT,	USER_FPSR+3		# FPSR accrued exception byte
-
-set USER_FPCR,		LV+32			# FP control register
-set FPCR_ENABLE,	USER_FPCR+2		# FPCR exception enable
-set FPCR_MODE,		USER_FPCR+3		# FPCR rounding mode control
-
-set L_SCR3,		LV+28			# integer scratch 3
-set L_SCR2,		LV+24			# integer scratch 2
-set L_SCR1,		LV+20			# integer scratch 1
-
-set STORE_FLG,		LV+19			# flag: operand store (ie. not fcmp/ftst)
-
-set EXC_TEMP2,		LV+24			# temporary space
-set EXC_TEMP,		LV+16			# temporary space
-
-set DTAG,		LV+15			# destination operand type
-set STAG,		LV+14			# source operand type
-
-set SPCOND_FLG,		LV+10			# flag: special case (see below)
-
-set EXC_CC,		LV+8			# saved condition codes
-set EXC_EXTWPTR,	LV+4			# saved current PC (active)
-set EXC_EXTWORD,	LV+2			# saved extension word
-set EXC_CMDREG,		LV+2			# saved extension word
-set EXC_OPWORD,		LV+0			# saved operation word
-
-################################
-
-# Helpful macros
-
-set FTEMP,		0			# offsets within an
-set FTEMP_EX,		0			# extended precision
-set FTEMP_SGN,		2			# value saved in memory.
-set FTEMP_HI,		4
-set FTEMP_LO,		8
-set FTEMP_GRS,		12
-
-set LOCAL,		0			# offsets within an
-set LOCAL_EX,		0			# extended precision
-set LOCAL_SGN,		2			# value saved in memory.
-set LOCAL_HI,		4
-set LOCAL_LO,		8
-set LOCAL_GRS,		12
-
-set DST,		0			# offsets within an
-set DST_EX,		0			# extended precision
-set DST_HI,		4			# value saved in memory.
-set DST_LO,		8
-
-set SRC,		0			# offsets within an
-set SRC_EX,		0			# extended precision
-set SRC_HI,		4			# value saved in memory.
-set SRC_LO,		8
-
-set SGL_LO,		0x3f81			# min sgl prec exponent
-set SGL_HI,		0x407e			# max sgl prec exponent
-set DBL_LO,		0x3c01			# min dbl prec exponent
-set DBL_HI,		0x43fe			# max dbl prec exponent
-set EXT_LO,		0x0			# min ext prec exponent
-set EXT_HI,		0x7ffe			# max ext prec exponent
-
-set EXT_BIAS,		0x3fff			# extended precision bias
-set SGL_BIAS,		0x007f			# single precision bias
-set DBL_BIAS,		0x03ff			# double precision bias
-
-set NORM,		0x00			# operand type for STAG/DTAG
-set ZERO,		0x01			# operand type for STAG/DTAG
-set INF,		0x02			# operand type for STAG/DTAG
-set QNAN,		0x03			# operand type for STAG/DTAG
-set DENORM,		0x04			# operand type for STAG/DTAG
-set SNAN,		0x05			# operand type for STAG/DTAG
-set UNNORM,		0x06			# operand type for STAG/DTAG
-
-##################
-# FPSR/FPCR bits #
-##################
-set neg_bit,		0x3			# negative result
-set z_bit,		0x2			# zero result
-set inf_bit,		0x1			# infinite result
-set nan_bit,		0x0			# NAN result
-
-set q_sn_bit,		0x7			# sign bit of quotient byte
-
-set bsun_bit,		7			# branch on unordered
-set snan_bit,		6			# signalling NAN
-set operr_bit,		5			# operand error
-set ovfl_bit,		4			# overflow
-set unfl_bit,		3			# underflow
-set dz_bit,		2			# divide by zero
-set inex2_bit,		1			# inexact result 2
-set inex1_bit,		0			# inexact result 1
-
-set aiop_bit,		7			# accrued inexact operation bit
-set aovfl_bit,		6			# accrued overflow bit
-set aunfl_bit,		5			# accrued underflow bit
-set adz_bit,		4			# accrued dz bit
-set ainex_bit,		3			# accrued inexact bit
-
-#############################
-# FPSR individual bit masks #
-#############################
-set neg_mask,		0x08000000		# negative bit mask (lw)
-set inf_mask,		0x02000000		# infinity bit mask (lw)
-set z_mask,		0x04000000		# zero bit mask (lw)
-set nan_mask,		0x01000000		# nan bit mask (lw)
-
-set neg_bmask,		0x08			# negative bit mask (byte)
-set inf_bmask,		0x02			# infinity bit mask (byte)
-set z_bmask,		0x04			# zero bit mask (byte)
-set nan_bmask,		0x01			# nan bit mask (byte)
-
-set bsun_mask,		0x00008000		# bsun exception mask
-set snan_mask,		0x00004000		# snan exception mask
-set operr_mask,		0x00002000		# operr exception mask
-set ovfl_mask,		0x00001000		# overflow exception mask
-set unfl_mask,		0x00000800		# underflow exception mask
-set dz_mask,		0x00000400		# dz exception mask
-set inex2_mask,		0x00000200		# inex2 exception mask
-set inex1_mask,		0x00000100		# inex1 exception mask
-
-set aiop_mask,		0x00000080		# accrued illegal operation
-set aovfl_mask,		0x00000040		# accrued overflow
-set aunfl_mask,		0x00000020		# accrued underflow
-set adz_mask,		0x00000010		# accrued divide by zero
-set ainex_mask,		0x00000008		# accrued inexact
-
-######################################
-# FPSR combinations used in the FPSP #
-######################################
-set dzinf_mask,		inf_mask+dz_mask+adz_mask
-set opnan_mask,		nan_mask+operr_mask+aiop_mask
-set nzi_mask,		0x01ffffff		#clears N, Z, and I
-set unfinx_mask,	unfl_mask+inex2_mask+aunfl_mask+ainex_mask
-set unf2inx_mask,	unfl_mask+inex2_mask+ainex_mask
-set ovfinx_mask,	ovfl_mask+inex2_mask+aovfl_mask+ainex_mask
-set inx1a_mask,		inex1_mask+ainex_mask
-set inx2a_mask,		inex2_mask+ainex_mask
-set snaniop_mask,	nan_mask+snan_mask+aiop_mask
-set snaniop2_mask,	snan_mask+aiop_mask
-set naniop_mask,	nan_mask+aiop_mask
-set neginf_mask,	neg_mask+inf_mask
-set infaiop_mask,	inf_mask+aiop_mask
-set negz_mask,		neg_mask+z_mask
-set opaop_mask,		operr_mask+aiop_mask
-set unfl_inx_mask,	unfl_mask+aunfl_mask+ainex_mask
-set ovfl_inx_mask,	ovfl_mask+aovfl_mask+ainex_mask
-
-#########
-# misc. #
-#########
-set rnd_stky_bit,	29			# stky bit pos in longword
-
-set sign_bit,		0x7			# sign bit
-set signan_bit,		0x6			# signalling nan bit
-
-set sgl_thresh,		0x3f81			# minimum sgl exponent
-set dbl_thresh,		0x3c01			# minimum dbl exponent
-
-set x_mode,		0x0			# extended precision
-set s_mode,		0x4			# single precision
-set d_mode,		0x8			# double precision
-
-set rn_mode,		0x0			# round-to-nearest
-set rz_mode,		0x1			# round-to-zero
-set rm_mode,		0x2			# round-tp-minus-infinity
-set rp_mode,		0x3			# round-to-plus-infinity
-
-set mantissalen,	64			# length of mantissa in bits
-
-set BYTE,		1			# len(byte) == 1 byte
-set WORD,		2			# len(word) == 2 bytes
-set LONG,		4			# len(longword) == 2 bytes
-
-set BSUN_VEC,		0xc0			# bsun    vector offset
-set INEX_VEC,		0xc4			# inexact vector offset
-set DZ_VEC,		0xc8			# dz      vector offset
-set UNFL_VEC,		0xcc			# unfl    vector offset
-set OPERR_VEC,		0xd0			# operr   vector offset
-set OVFL_VEC,		0xd4			# ovfl    vector offset
-set SNAN_VEC,		0xd8			# snan    vector offset
-
-###########################
-# SPecial CONDition FLaGs #
-###########################
-set ftrapcc_flg,	0x01			# flag bit: ftrapcc exception
-set fbsun_flg,		0x02			# flag bit: bsun exception
-set mia7_flg,		0x04			# flag bit: (a7)+ <ea>
-set mda7_flg,		0x08			# flag bit: -(a7) <ea>
-set fmovm_flg,		0x40			# flag bit: fmovm instruction
-set immed_flg,		0x80			# flag bit: &<data> <ea>
-
-set ftrapcc_bit,	0x0
-set fbsun_bit,		0x1
-set mia7_bit,		0x2
-set mda7_bit,		0x3
-set immed_bit,		0x7
-
-##################################
-# TRANSCENDENTAL "LAST-OP" FLAGS #
-##################################
-set FMUL_OP,		0x0			# fmul instr performed last
-set FDIV_OP,		0x1			# fdiv performed last
-set FADD_OP,		0x2			# fadd performed last
-set FMOV_OP,		0x3			# fmov performed last
-
-#############
-# CONSTANTS #
-#############
-T1:	long		0x40C62D38,0xD3D64634	# 16381 LOG2 LEAD
-T2:	long		0x3D6F90AE,0xB1E75CC7	# 16381 LOG2 TRAIL
-
-PI:	long		0x40000000,0xC90FDAA2,0x2168C235,0x00000000
-PIBY2:	long		0x3FFF0000,0xC90FDAA2,0x2168C235,0x00000000
-
-TWOBYPI:
-	long		0x3FE45F30,0x6DC9C883
-
-#########################################################################
-# MONADIC TEMPLATE							#
-#########################################################################
-	global		_fsins_
-_fsins_:
-	link		%a6,&-LOCAL_SIZE
-
-	movm.l		&0x0303,EXC_DREGS(%a6)	# save d0-d1/a0-a1
-	fmovm.l		%fpcr,%fpsr,USER_FPCR(%a6) # save ctrl regs
-	fmovm.x		&0xc0,EXC_FP0(%a6)	# save fp0/fp1
-
-	fmov.l		&0x0,%fpcr		# zero FPCR
-
-#
-#	copy, convert, and tag input argument
-#
-	fmov.s		0x8(%a6),%fp0		# load sgl input
-	fmov.x		%fp0,FP_SRC(%a6)
-	lea		FP_SRC(%a6),%a0
-	bsr.l		tag			# fetch operand type
-	mov.b		%d0,STAG(%a6)
-	mov.b		%d0,%d1
-
-	andi.l		&0x00ff00ff,USER_FPSR(%a6)
-
-	clr.l		%d0
-	mov.b		FPCR_MODE(%a6),%d0	# pass rnd mode,prec
-
-	tst.b		%d1
-	bne.b		_L0_2s
-	bsr.l		ssin			# operand is a NORM
-	bra.b		_L0_6s
-_L0_2s:
-	cmpi.b		%d1,&ZERO		# is operand a ZERO?
-	bne.b		_L0_3s			# no
-	bsr.l		src_zero			# yes
-	bra.b		_L0_6s
-_L0_3s:
-	cmpi.b		%d1,&INF		# is operand an INF?
-	bne.b		_L0_4s			# no
-	bsr.l		t_operr			# yes
-	bra.b		_L0_6s
-_L0_4s:
-	cmpi.b		%d1,&QNAN		# is operand a QNAN?
-	bne.b		_L0_5s			# no
-	bsr.l		src_qnan			# yes
-	bra.b		_L0_6s
-_L0_5s:
-	bsr.l		ssind			# operand is a DENORM
-_L0_6s:
-
-#
-#	Result is now in FP0
-#
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr # restore ctrl regs
-	fmovm.x		EXC_FP1(%a6),&0x40	# restore fp1
-	unlk		%a6
-	rts
-
-	global		_fsind_
-_fsind_:
-	link		%a6,&-LOCAL_SIZE
-
-	movm.l		&0x0303,EXC_DREGS(%a6)	# save d0-d1/a0-a1
-	fmovm.l		%fpcr,%fpsr,USER_FPCR(%a6) # save ctrl regs
-	fmovm.x		&0xc0,EXC_FP0(%a6)	# save fp0/fp1
-
-	fmov.l		&0x0,%fpcr		# zero FPCR
-
-#
-#	copy, convert, and tag input argument
-#
-	fmov.d		0x8(%a6),%fp0		# load dbl input
-	fmov.x		%fp0,FP_SRC(%a6)
-	lea		FP_SRC(%a6),%a0
-	bsr.l		tag			# fetch operand type
-	mov.b		%d0,STAG(%a6)
-	mov.b		%d0,%d1
-
-	andi.l		&0x00ff00ff,USER_FPSR(%a6)
-
-	clr.l		%d0
-	mov.b		FPCR_MODE(%a6),%d0	# pass rnd mode,prec
-
-	mov.b		%d1,STAG(%a6)
-	tst.b		%d1
-	bne.b		_L0_2d
-	bsr.l		ssin			# operand is a NORM
-	bra.b		_L0_6d
-_L0_2d:
-	cmpi.b		%d1,&ZERO		# is operand a ZERO?
-	bne.b		_L0_3d			# no
-	bsr.l		src_zero			# yes
-	bra.b		_L0_6d
-_L0_3d:
-	cmpi.b		%d1,&INF		# is operand an INF?
-	bne.b		_L0_4d			# no
-	bsr.l		t_operr			# yes
-	bra.b		_L0_6d
-_L0_4d:
-	cmpi.b		%d1,&QNAN		# is operand a QNAN?
-	bne.b		_L0_5d			# no
-	bsr.l		src_qnan			# yes
-	bra.b		_L0_6d
-_L0_5d:
-	bsr.l		ssind			# operand is a DENORM
-_L0_6d:
-
-#
-#	Result is now in FP0
-#
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr # restore ctrl regs
-	fmovm.x		EXC_FP1(%a6),&0x40	# restore fp1
-	unlk		%a6
-	rts
-
-	global		_fsinx_
-_fsinx_:
-	link		%a6,&-LOCAL_SIZE
-
-	movm.l		&0x0303,EXC_DREGS(%a6)	# save d0-d1/a0-a1
-	fmovm.l		%fpcr,%fpsr,USER_FPCR(%a6) # save ctrl regs
-	fmovm.x		&0xc0,EXC_FP0(%a6)	# save fp0/fp1
-
-	fmov.l		&0x0,%fpcr		# zero FPCR
-
-#
-#	copy, convert, and tag input argument
-#
-	lea		FP_SRC(%a6),%a0
-	mov.l		0x8+0x0(%a6),0x0(%a0)	# load ext input
-	mov.l		0x8+0x4(%a6),0x4(%a0)
-	mov.l		0x8+0x8(%a6),0x8(%a0)
-	bsr.l		tag			# fetch operand type
-	mov.b		%d0,STAG(%a6)
-	mov.b		%d0,%d1
-
-	andi.l		&0x00ff00ff,USER_FPSR(%a6)
-
-	clr.l		%d0
-	mov.b		FPCR_MODE(%a6),%d0	# pass rnd mode,prec
-
-	tst.b		%d1
-	bne.b		_L0_2x
-	bsr.l		ssin			# operand is a NORM
-	bra.b		_L0_6x
-_L0_2x:
-	cmpi.b		%d1,&ZERO		# is operand a ZERO?
-	bne.b		_L0_3x			# no
-	bsr.l		src_zero			# yes
-	bra.b		_L0_6x
-_L0_3x:
-	cmpi.b		%d1,&INF		# is operand an INF?
-	bne.b		_L0_4x			# no
-	bsr.l		t_operr			# yes
-	bra.b		_L0_6x
-_L0_4x:
-	cmpi.b		%d1,&QNAN		# is operand a QNAN?
-	bne.b		_L0_5x			# no
-	bsr.l		src_qnan			# yes
-	bra.b		_L0_6x
-_L0_5x:
-	bsr.l		ssind			# operand is a DENORM
-_L0_6x:
-
-#
-#	Result is now in FP0
-#
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr # restore ctrl regs
-	fmovm.x		EXC_FP1(%a6),&0x40	# restore fp1
-	unlk		%a6
-	rts
-
-
-#########################################################################
-# MONADIC TEMPLATE							#
-#########################################################################
-	global		_fcoss_
-_fcoss_:
-	link		%a6,&-LOCAL_SIZE
-
-	movm.l		&0x0303,EXC_DREGS(%a6)	# save d0-d1/a0-a1
-	fmovm.l		%fpcr,%fpsr,USER_FPCR(%a6) # save ctrl regs
-	fmovm.x		&0xc0,EXC_FP0(%a6)	# save fp0/fp1
-
-	fmov.l		&0x0,%fpcr		# zero FPCR
-
-#
-#	copy, convert, and tag input argument
-#
-	fmov.s		0x8(%a6),%fp0		# load sgl input
-	fmov.x		%fp0,FP_SRC(%a6)
-	lea		FP_SRC(%a6),%a0
-	bsr.l		tag			# fetch operand type
-	mov.b		%d0,STAG(%a6)
-	mov.b		%d0,%d1
-
-	andi.l		&0x00ff00ff,USER_FPSR(%a6)
-
-	clr.l		%d0
-	mov.b		FPCR_MODE(%a6),%d0	# pass rnd mode,prec
-
-	tst.b		%d1
-	bne.b		_L1_2s
-	bsr.l		scos			# operand is a NORM
-	bra.b		_L1_6s
-_L1_2s:
-	cmpi.b		%d1,&ZERO		# is operand a ZERO?
-	bne.b		_L1_3s			# no
-	bsr.l		ld_pone			# yes
-	bra.b		_L1_6s
-_L1_3s:
-	cmpi.b		%d1,&INF		# is operand an INF?
-	bne.b		_L1_4s			# no
-	bsr.l		t_operr			# yes
-	bra.b		_L1_6s
-_L1_4s:
-	cmpi.b		%d1,&QNAN		# is operand a QNAN?
-	bne.b		_L1_5s			# no
-	bsr.l		src_qnan			# yes
-	bra.b		_L1_6s
-_L1_5s:
-	bsr.l		scosd			# operand is a DENORM
-_L1_6s:
-
-#
-#	Result is now in FP0
-#
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr # restore ctrl regs
-	fmovm.x		EXC_FP1(%a6),&0x40	# restore fp1
-	unlk		%a6
-	rts
-
-	global		_fcosd_
-_fcosd_:
-	link		%a6,&-LOCAL_SIZE
-
-	movm.l		&0x0303,EXC_DREGS(%a6)	# save d0-d1/a0-a1
-	fmovm.l		%fpcr,%fpsr,USER_FPCR(%a6) # save ctrl regs
-	fmovm.x		&0xc0,EXC_FP0(%a6)	# save fp0/fp1
-
-	fmov.l		&0x0,%fpcr		# zero FPCR
-
-#
-#	copy, convert, and tag input argument
-#
-	fmov.d		0x8(%a6),%fp0		# load dbl input
-	fmov.x		%fp0,FP_SRC(%a6)
-	lea		FP_SRC(%a6),%a0
-	bsr.l		tag			# fetch operand type
-	mov.b		%d0,STAG(%a6)
-	mov.b		%d0,%d1
-
-	andi.l		&0x00ff00ff,USER_FPSR(%a6)
-
-	clr.l		%d0
-	mov.b		FPCR_MODE(%a6),%d0	# pass rnd mode,prec
-
-	mov.b		%d1,STAG(%a6)
-	tst.b		%d1
-	bne.b		_L1_2d
-	bsr.l		scos			# operand is a NORM
-	bra.b		_L1_6d
-_L1_2d:
-	cmpi.b		%d1,&ZERO		# is operand a ZERO?
-	bne.b		_L1_3d			# no
-	bsr.l		ld_pone			# yes
-	bra.b		_L1_6d
-_L1_3d:
-	cmpi.b		%d1,&INF		# is operand an INF?
-	bne.b		_L1_4d			# no
-	bsr.l		t_operr			# yes
-	bra.b		_L1_6d
-_L1_4d:
-	cmpi.b		%d1,&QNAN		# is operand a QNAN?
-	bne.b		_L1_5d			# no
-	bsr.l		src_qnan			# yes
-	bra.b		_L1_6d
-_L1_5d:
-	bsr.l		scosd			# operand is a DENORM
-_L1_6d:
-
-#
-#	Result is now in FP0
-#
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr # restore ctrl regs
-	fmovm.x		EXC_FP1(%a6),&0x40	# restore fp1
-	unlk		%a6
-	rts
-
-	global		_fcosx_
-_fcosx_:
-	link		%a6,&-LOCAL_SIZE
-
-	movm.l		&0x0303,EXC_DREGS(%a6)	# save d0-d1/a0-a1
-	fmovm.l		%fpcr,%fpsr,USER_FPCR(%a6) # save ctrl regs
-	fmovm.x		&0xc0,EXC_FP0(%a6)	# save fp0/fp1
-
-	fmov.l		&0x0,%fpcr		# zero FPCR
-
-#
-#	copy, convert, and tag input argument
-#
-	lea		FP_SRC(%a6),%a0
-	mov.l		0x8+0x0(%a6),0x0(%a0)	# load ext input
-	mov.l		0x8+0x4(%a6),0x4(%a0)
-	mov.l		0x8+0x8(%a6),0x8(%a0)
-	bsr.l		tag			# fetch operand type
-	mov.b		%d0,STAG(%a6)
-	mov.b		%d0,%d1
-
-	andi.l		&0x00ff00ff,USER_FPSR(%a6)
-
-	clr.l		%d0
-	mov.b		FPCR_MODE(%a6),%d0	# pass rnd mode,prec
-
-	tst.b		%d1
-	bne.b		_L1_2x
-	bsr.l		scos			# operand is a NORM
-	bra.b		_L1_6x
-_L1_2x:
-	cmpi.b		%d1,&ZERO		# is operand a ZERO?
-	bne.b		_L1_3x			# no
-	bsr.l		ld_pone			# yes
-	bra.b		_L1_6x
-_L1_3x:
-	cmpi.b		%d1,&INF		# is operand an INF?
-	bne.b		_L1_4x			# no
-	bsr.l		t_operr			# yes
-	bra.b		_L1_6x
-_L1_4x:
-	cmpi.b		%d1,&QNAN		# is operand a QNAN?
-	bne.b		_L1_5x			# no
-	bsr.l		src_qnan			# yes
-	bra.b		_L1_6x
-_L1_5x:
-	bsr.l		scosd			# operand is a DENORM
-_L1_6x:
-
-#
-#	Result is now in FP0
-#
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr # restore ctrl regs
-	fmovm.x		EXC_FP1(%a6),&0x40	# restore fp1
-	unlk		%a6
-	rts
-
-
-#########################################################################
-# MONADIC TEMPLATE							#
-#########################################################################
-	global		_fsinhs_
-_fsinhs_:
-	link		%a6,&-LOCAL_SIZE
-
-	movm.l		&0x0303,EXC_DREGS(%a6)	# save d0-d1/a0-a1
-	fmovm.l		%fpcr,%fpsr,USER_FPCR(%a6) # save ctrl regs
-	fmovm.x		&0xc0,EXC_FP0(%a6)	# save fp0/fp1
-
-	fmov.l		&0x0,%fpcr		# zero FPCR
-
-#
-#	copy, convert, and tag input argument
-#
-	fmov.s		0x8(%a6),%fp0		# load sgl input
-	fmov.x		%fp0,FP_SRC(%a6)
-	lea		FP_SRC(%a6),%a0
-	bsr.l		tag			# fetch operand type
-	mov.b		%d0,STAG(%a6)
-	mov.b		%d0,%d1
-
-	andi.l		&0x00ff00ff,USER_FPSR(%a6)
-
-	clr.l		%d0
-	mov.b		FPCR_MODE(%a6),%d0	# pass rnd mode,prec
-
-	tst.b		%d1
-	bne.b		_L2_2s
-	bsr.l		ssinh			# operand is a NORM
-	bra.b		_L2_6s
-_L2_2s:
-	cmpi.b		%d1,&ZERO		# is operand a ZERO?
-	bne.b		_L2_3s			# no
-	bsr.l		src_zero			# yes
-	bra.b		_L2_6s
-_L2_3s:
-	cmpi.b		%d1,&INF		# is operand an INF?
-	bne.b		_L2_4s			# no
-	bsr.l		src_inf			# yes
-	bra.b		_L2_6s
-_L2_4s:
-	cmpi.b		%d1,&QNAN		# is operand a QNAN?
-	bne.b		_L2_5s			# no
-	bsr.l		src_qnan			# yes
-	bra.b		_L2_6s
-_L2_5s:
-	bsr.l		ssinhd			# operand is a DENORM
-_L2_6s:
-
-#
-#	Result is now in FP0
-#
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr # restore ctrl regs
-	fmovm.x		EXC_FP1(%a6),&0x40	# restore fp1
-	unlk		%a6
-	rts
-
-	global		_fsinhd_
-_fsinhd_:
-	link		%a6,&-LOCAL_SIZE
-
-	movm.l		&0x0303,EXC_DREGS(%a6)	# save d0-d1/a0-a1
-	fmovm.l		%fpcr,%fpsr,USER_FPCR(%a6) # save ctrl regs
-	fmovm.x		&0xc0,EXC_FP0(%a6)	# save fp0/fp1
-
-	fmov.l		&0x0,%fpcr		# zero FPCR
-
-#
-#	copy, convert, and tag input argument
-#
-	fmov.d		0x8(%a6),%fp0		# load dbl input
-	fmov.x		%fp0,FP_SRC(%a6)
-	lea		FP_SRC(%a6),%a0
-	bsr.l		tag			# fetch operand type
-	mov.b		%d0,STAG(%a6)
-	mov.b		%d0,%d1
-
-	andi.l		&0x00ff00ff,USER_FPSR(%a6)
-
-	clr.l		%d0
-	mov.b		FPCR_MODE(%a6),%d0	# pass rnd mode,prec
-
-	mov.b		%d1,STAG(%a6)
-	tst.b		%d1
-	bne.b		_L2_2d
-	bsr.l		ssinh			# operand is a NORM
-	bra.b		_L2_6d
-_L2_2d:
-	cmpi.b		%d1,&ZERO		# is operand a ZERO?
-	bne.b		_L2_3d			# no
-	bsr.l		src_zero			# yes
-	bra.b		_L2_6d
-_L2_3d:
-	cmpi.b		%d1,&INF		# is operand an INF?
-	bne.b		_L2_4d			# no
-	bsr.l		src_inf			# yes
-	bra.b		_L2_6d
-_L2_4d:
-	cmpi.b		%d1,&QNAN		# is operand a QNAN?
-	bne.b		_L2_5d			# no
-	bsr.l		src_qnan			# yes
-	bra.b		_L2_6d
-_L2_5d:
-	bsr.l		ssinhd			# operand is a DENORM
-_L2_6d:
-
-#
-#	Result is now in FP0
-#
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr # restore ctrl regs
-	fmovm.x		EXC_FP1(%a6),&0x40	# restore fp1
-	unlk		%a6
-	rts
-
-	global		_fsinhx_
-_fsinhx_:
-	link		%a6,&-LOCAL_SIZE
-
-	movm.l		&0x0303,EXC_DREGS(%a6)	# save d0-d1/a0-a1
-	fmovm.l		%fpcr,%fpsr,USER_FPCR(%a6) # save ctrl regs
-	fmovm.x		&0xc0,EXC_FP0(%a6)	# save fp0/fp1
-
-	fmov.l		&0x0,%fpcr		# zero FPCR
-
-#
-#	copy, convert, and tag input argument
-#
-	lea		FP_SRC(%a6),%a0
-	mov.l		0x8+0x0(%a6),0x0(%a0)	# load ext input
-	mov.l		0x8+0x4(%a6),0x4(%a0)
-	mov.l		0x8+0x8(%a6),0x8(%a0)
-	bsr.l		tag			# fetch operand type
-	mov.b		%d0,STAG(%a6)
-	mov.b		%d0,%d1
-
-	andi.l		&0x00ff00ff,USER_FPSR(%a6)
-
-	clr.l		%d0
-	mov.b		FPCR_MODE(%a6),%d0	# pass rnd mode,prec
-
-	tst.b		%d1
-	bne.b		_L2_2x
-	bsr.l		ssinh			# operand is a NORM
-	bra.b		_L2_6x
-_L2_2x:
-	cmpi.b		%d1,&ZERO		# is operand a ZERO?
-	bne.b		_L2_3x			# no
-	bsr.l		src_zero			# yes
-	bra.b		_L2_6x
-_L2_3x:
-	cmpi.b		%d1,&INF		# is operand an INF?
-	bne.b		_L2_4x			# no
-	bsr.l		src_inf			# yes
-	bra.b		_L2_6x
-_L2_4x:
-	cmpi.b		%d1,&QNAN		# is operand a QNAN?
-	bne.b		_L2_5x			# no
-	bsr.l		src_qnan			# yes
-	bra.b		_L2_6x
-_L2_5x:
-	bsr.l		ssinhd			# operand is a DENORM
-_L2_6x:
-
-#
-#	Result is now in FP0
-#
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr # restore ctrl regs
-	fmovm.x		EXC_FP1(%a6),&0x40	# restore fp1
-	unlk		%a6
-	rts
-
-
-#########################################################################
-# MONADIC TEMPLATE							#
-#########################################################################
-	global		_flognp1s_
-_flognp1s_:
-	link		%a6,&-LOCAL_SIZE
-
-	movm.l		&0x0303,EXC_DREGS(%a6)	# save d0-d1/a0-a1
-	fmovm.l		%fpcr,%fpsr,USER_FPCR(%a6) # save ctrl regs
-	fmovm.x		&0xc0,EXC_FP0(%a6)	# save fp0/fp1
-
-	fmov.l		&0x0,%fpcr		# zero FPCR
-
-#
-#	copy, convert, and tag input argument
-#
-	fmov.s		0x8(%a6),%fp0		# load sgl input
-	fmov.x		%fp0,FP_SRC(%a6)
-	lea		FP_SRC(%a6),%a0
-	bsr.l		tag			# fetch operand type
-	mov.b		%d0,STAG(%a6)
-	mov.b		%d0,%d1
-
-	andi.l		&0x00ff00ff,USER_FPSR(%a6)
-
-	clr.l		%d0
-	mov.b		FPCR_MODE(%a6),%d0	# pass rnd mode,prec
-
-	tst.b		%d1
-	bne.b		_L3_2s
-	bsr.l		slognp1			# operand is a NORM
-	bra.b		_L3_6s
-_L3_2s:
-	cmpi.b		%d1,&ZERO		# is operand a ZERO?
-	bne.b		_L3_3s			# no
-	bsr.l		src_zero			# yes
-	bra.b		_L3_6s
-_L3_3s:
-	cmpi.b		%d1,&INF		# is operand an INF?
-	bne.b		_L3_4s			# no
-	bsr.l		sopr_inf			# yes
-	bra.b		_L3_6s
-_L3_4s:
-	cmpi.b		%d1,&QNAN		# is operand a QNAN?
-	bne.b		_L3_5s			# no
-	bsr.l		src_qnan			# yes
-	bra.b		_L3_6s
-_L3_5s:
-	bsr.l		slognp1d			# operand is a DENORM
-_L3_6s:
-
-#
-#	Result is now in FP0
-#
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr # restore ctrl regs
-	fmovm.x		EXC_FP1(%a6),&0x40	# restore fp1
-	unlk		%a6
-	rts
-
-	global		_flognp1d_
-_flognp1d_:
-	link		%a6,&-LOCAL_SIZE
-
-	movm.l		&0x0303,EXC_DREGS(%a6)	# save d0-d1/a0-a1
-	fmovm.l		%fpcr,%fpsr,USER_FPCR(%a6) # save ctrl regs
-	fmovm.x		&0xc0,EXC_FP0(%a6)	# save fp0/fp1
-
-	fmov.l		&0x0,%fpcr		# zero FPCR
-
-#
-#	copy, convert, and tag input argument
-#
-	fmov.d		0x8(%a6),%fp0		# load dbl input
-	fmov.x		%fp0,FP_SRC(%a6)
-	lea		FP_SRC(%a6),%a0
-	bsr.l		tag			# fetch operand type
-	mov.b		%d0,STAG(%a6)
-	mov.b		%d0,%d1
-
-	andi.l		&0x00ff00ff,USER_FPSR(%a6)
-
-	clr.l		%d0
-	mov.b		FPCR_MODE(%a6),%d0	# pass rnd mode,prec
-
-	mov.b		%d1,STAG(%a6)
-	tst.b		%d1
-	bne.b		_L3_2d
-	bsr.l		slognp1			# operand is a NORM
-	bra.b		_L3_6d
-_L3_2d:
-	cmpi.b		%d1,&ZERO		# is operand a ZERO?
-	bne.b		_L3_3d			# no
-	bsr.l		src_zero			# yes
-	bra.b		_L3_6d
-_L3_3d:
-	cmpi.b		%d1,&INF		# is operand an INF?
-	bne.b		_L3_4d			# no
-	bsr.l		sopr_inf			# yes
-	bra.b		_L3_6d
-_L3_4d:
-	cmpi.b		%d1,&QNAN		# is operand a QNAN?
-	bne.b		_L3_5d			# no
-	bsr.l		src_qnan			# yes
-	bra.b		_L3_6d
-_L3_5d:
-	bsr.l		slognp1d			# operand is a DENORM
-_L3_6d:
-
-#
-#	Result is now in FP0
-#
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr # restore ctrl regs
-	fmovm.x		EXC_FP1(%a6),&0x40	# restore fp1
-	unlk		%a6
-	rts
-
-	global		_flognp1x_
-_flognp1x_:
-	link		%a6,&-LOCAL_SIZE
-
-	movm.l		&0x0303,EXC_DREGS(%a6)	# save d0-d1/a0-a1
-	fmovm.l		%fpcr,%fpsr,USER_FPCR(%a6) # save ctrl regs
-	fmovm.x		&0xc0,EXC_FP0(%a6)	# save fp0/fp1
-
-	fmov.l		&0x0,%fpcr		# zero FPCR
-
-#
-#	copy, convert, and tag input argument
-#
-	lea		FP_SRC(%a6),%a0
-	mov.l		0x8+0x0(%a6),0x0(%a0)	# load ext input
-	mov.l		0x8+0x4(%a6),0x4(%a0)
-	mov.l		0x8+0x8(%a6),0x8(%a0)
-	bsr.l		tag			# fetch operand type
-	mov.b		%d0,STAG(%a6)
-	mov.b		%d0,%d1
-
-	andi.l		&0x00ff00ff,USER_FPSR(%a6)
-
-	clr.l		%d0
-	mov.b		FPCR_MODE(%a6),%d0	# pass rnd mode,prec
-
-	tst.b		%d1
-	bne.b		_L3_2x
-	bsr.l		slognp1			# operand is a NORM
-	bra.b		_L3_6x
-_L3_2x:
-	cmpi.b		%d1,&ZERO		# is operand a ZERO?
-	bne.b		_L3_3x			# no
-	bsr.l		src_zero			# yes
-	bra.b		_L3_6x
-_L3_3x:
-	cmpi.b		%d1,&INF		# is operand an INF?
-	bne.b		_L3_4x			# no
-	bsr.l		sopr_inf			# yes
-	bra.b		_L3_6x
-_L3_4x:
-	cmpi.b		%d1,&QNAN		# is operand a QNAN?
-	bne.b		_L3_5x			# no
-	bsr.l		src_qnan			# yes
-	bra.b		_L3_6x
-_L3_5x:
-	bsr.l		slognp1d			# operand is a DENORM
-_L3_6x:
-
-#
-#	Result is now in FP0
-#
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr # restore ctrl regs
-	fmovm.x		EXC_FP1(%a6),&0x40	# restore fp1
-	unlk		%a6
-	rts
-
-
-#########################################################################
-# MONADIC TEMPLATE							#
-#########################################################################
-	global		_fetoxm1s_
-_fetoxm1s_:
-	link		%a6,&-LOCAL_SIZE
-
-	movm.l		&0x0303,EXC_DREGS(%a6)	# save d0-d1/a0-a1
-	fmovm.l		%fpcr,%fpsr,USER_FPCR(%a6) # save ctrl regs
-	fmovm.x		&0xc0,EXC_FP0(%a6)	# save fp0/fp1
-
-	fmov.l		&0x0,%fpcr		# zero FPCR
-
-#
-#	copy, convert, and tag input argument
-#
-	fmov.s		0x8(%a6),%fp0		# load sgl input
-	fmov.x		%fp0,FP_SRC(%a6)
-	lea		FP_SRC(%a6),%a0
-	bsr.l		tag			# fetch operand type
-	mov.b		%d0,STAG(%a6)
-	mov.b		%d0,%d1
-
-	andi.l		&0x00ff00ff,USER_FPSR(%a6)
-
-	clr.l		%d0
-	mov.b		FPCR_MODE(%a6),%d0	# pass rnd mode,prec
-
-	tst.b		%d1
-	bne.b		_L4_2s
-	bsr.l		setoxm1			# operand is a NORM
-	bra.b		_L4_6s
-_L4_2s:
-	cmpi.b		%d1,&ZERO		# is operand a ZERO?
-	bne.b		_L4_3s			# no
-	bsr.l		src_zero			# yes
-	bra.b		_L4_6s
-_L4_3s:
-	cmpi.b		%d1,&INF		# is operand an INF?
-	bne.b		_L4_4s			# no
-	bsr.l		setoxm1i			# yes
-	bra.b		_L4_6s
-_L4_4s:
-	cmpi.b		%d1,&QNAN		# is operand a QNAN?
-	bne.b		_L4_5s			# no
-	bsr.l		src_qnan			# yes
-	bra.b		_L4_6s
-_L4_5s:
-	bsr.l		setoxm1d			# operand is a DENORM
-_L4_6s:
-
-#
-#	Result is now in FP0
-#
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr # restore ctrl regs
-	fmovm.x		EXC_FP1(%a6),&0x40	# restore fp1
-	unlk		%a6
-	rts
-
-	global		_fetoxm1d_
-_fetoxm1d_:
-	link		%a6,&-LOCAL_SIZE
-
-	movm.l		&0x0303,EXC_DREGS(%a6)	# save d0-d1/a0-a1
-	fmovm.l		%fpcr,%fpsr,USER_FPCR(%a6) # save ctrl regs
-	fmovm.x		&0xc0,EXC_FP0(%a6)	# save fp0/fp1
-
-	fmov.l		&0x0,%fpcr		# zero FPCR
-
-#
-#	copy, convert, and tag input argument
-#
-	fmov.d		0x8(%a6),%fp0		# load dbl input
-	fmov.x		%fp0,FP_SRC(%a6)
-	lea		FP_SRC(%a6),%a0
-	bsr.l		tag			# fetch operand type
-	mov.b		%d0,STAG(%a6)
-	mov.b		%d0,%d1
-
-	andi.l		&0x00ff00ff,USER_FPSR(%a6)
-
-	clr.l		%d0
-	mov.b		FPCR_MODE(%a6),%d0	# pass rnd mode,prec
-
-	mov.b		%d1,STAG(%a6)
-	tst.b		%d1
-	bne.b		_L4_2d
-	bsr.l		setoxm1			# operand is a NORM
-	bra.b		_L4_6d
-_L4_2d:
-	cmpi.b		%d1,&ZERO		# is operand a ZERO?
-	bne.b		_L4_3d			# no
-	bsr.l		src_zero			# yes
-	bra.b		_L4_6d
-_L4_3d:
-	cmpi.b		%d1,&INF		# is operand an INF?
-	bne.b		_L4_4d			# no
-	bsr.l		setoxm1i			# yes
-	bra.b		_L4_6d
-_L4_4d:
-	cmpi.b		%d1,&QNAN		# is operand a QNAN?
-	bne.b		_L4_5d			# no
-	bsr.l		src_qnan			# yes
-	bra.b		_L4_6d
-_L4_5d:
-	bsr.l		setoxm1d			# operand is a DENORM
-_L4_6d:
-
-#
-#	Result is now in FP0
-#
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr # restore ctrl regs
-	fmovm.x		EXC_FP1(%a6),&0x40	# restore fp1
-	unlk		%a6
-	rts
-
-	global		_fetoxm1x_
-_fetoxm1x_:
-	link		%a6,&-LOCAL_SIZE
-
-	movm.l		&0x0303,EXC_DREGS(%a6)	# save d0-d1/a0-a1
-	fmovm.l		%fpcr,%fpsr,USER_FPCR(%a6) # save ctrl regs
-	fmovm.x		&0xc0,EXC_FP0(%a6)	# save fp0/fp1
-
-	fmov.l		&0x0,%fpcr		# zero FPCR
-
-#
-#	copy, convert, and tag input argument
-#
-	lea		FP_SRC(%a6),%a0
-	mov.l		0x8+0x0(%a6),0x0(%a0)	# load ext input
-	mov.l		0x8+0x4(%a6),0x4(%a0)
-	mov.l		0x8+0x8(%a6),0x8(%a0)
-	bsr.l		tag			# fetch operand type
-	mov.b		%d0,STAG(%a6)
-	mov.b		%d0,%d1
-
-	andi.l		&0x00ff00ff,USER_FPSR(%a6)
-
-	clr.l		%d0
-	mov.b		FPCR_MODE(%a6),%d0	# pass rnd mode,prec
-
-	tst.b		%d1
-	bne.b		_L4_2x
-	bsr.l		setoxm1			# operand is a NORM
-	bra.b		_L4_6x
-_L4_2x:
-	cmpi.b		%d1,&ZERO		# is operand a ZERO?
-	bne.b		_L4_3x			# no
-	bsr.l		src_zero			# yes
-	bra.b		_L4_6x
-_L4_3x:
-	cmpi.b		%d1,&INF		# is operand an INF?
-	bne.b		_L4_4x			# no
-	bsr.l		setoxm1i			# yes
-	bra.b		_L4_6x
-_L4_4x:
-	cmpi.b		%d1,&QNAN		# is operand a QNAN?
-	bne.b		_L4_5x			# no
-	bsr.l		src_qnan			# yes
-	bra.b		_L4_6x
-_L4_5x:
-	bsr.l		setoxm1d			# operand is a DENORM
-_L4_6x:
-
-#
-#	Result is now in FP0
-#
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr # restore ctrl regs
-	fmovm.x		EXC_FP1(%a6),&0x40	# restore fp1
-	unlk		%a6
-	rts
-
-
-#########################################################################
-# MONADIC TEMPLATE							#
-#########################################################################
-	global		_ftanhs_
-_ftanhs_:
-	link		%a6,&-LOCAL_SIZE
-
-	movm.l		&0x0303,EXC_DREGS(%a6)	# save d0-d1/a0-a1
-	fmovm.l		%fpcr,%fpsr,USER_FPCR(%a6) # save ctrl regs
-	fmovm.x		&0xc0,EXC_FP0(%a6)	# save fp0/fp1
-
-	fmov.l		&0x0,%fpcr		# zero FPCR
-
-#
-#	copy, convert, and tag input argument
-#
-	fmov.s		0x8(%a6),%fp0		# load sgl input
-	fmov.x		%fp0,FP_SRC(%a6)
-	lea		FP_SRC(%a6),%a0
-	bsr.l		tag			# fetch operand type
-	mov.b		%d0,STAG(%a6)
-	mov.b		%d0,%d1
-
-	andi.l		&0x00ff00ff,USER_FPSR(%a6)
-
-	clr.l		%d0
-	mov.b		FPCR_MODE(%a6),%d0	# pass rnd mode,prec
-
-	tst.b		%d1
-	bne.b		_L5_2s
-	bsr.l		stanh			# operand is a NORM
-	bra.b		_L5_6s
-_L5_2s:
-	cmpi.b		%d1,&ZERO		# is operand a ZERO?
-	bne.b		_L5_3s			# no
-	bsr.l		src_zero			# yes
-	bra.b		_L5_6s
-_L5_3s:
-	cmpi.b		%d1,&INF		# is operand an INF?
-	bne.b		_L5_4s			# no
-	bsr.l		src_one			# yes
-	bra.b		_L5_6s
-_L5_4s:
-	cmpi.b		%d1,&QNAN		# is operand a QNAN?
-	bne.b		_L5_5s			# no
-	bsr.l		src_qnan			# yes
-	bra.b		_L5_6s
-_L5_5s:
-	bsr.l		stanhd			# operand is a DENORM
-_L5_6s:
-
-#
-#	Result is now in FP0
-#
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr # restore ctrl regs
-	fmovm.x		EXC_FP1(%a6),&0x40	# restore fp1
-	unlk		%a6
-	rts
-
-	global		_ftanhd_
-_ftanhd_:
-	link		%a6,&-LOCAL_SIZE
-
-	movm.l		&0x0303,EXC_DREGS(%a6)	# save d0-d1/a0-a1
-	fmovm.l		%fpcr,%fpsr,USER_FPCR(%a6) # save ctrl regs
-	fmovm.x		&0xc0,EXC_FP0(%a6)	# save fp0/fp1
-
-	fmov.l		&0x0,%fpcr		# zero FPCR
-
-#
-#	copy, convert, and tag input argument
-#
-	fmov.d		0x8(%a6),%fp0		# load dbl input
-	fmov.x		%fp0,FP_SRC(%a6)
-	lea		FP_SRC(%a6),%a0
-	bsr.l		tag			# fetch operand type
-	mov.b		%d0,STAG(%a6)
-	mov.b		%d0,%d1
-
-	andi.l		&0x00ff00ff,USER_FPSR(%a6)
-
-	clr.l		%d0
-	mov.b		FPCR_MODE(%a6),%d0	# pass rnd mode,prec
-
-	mov.b		%d1,STAG(%a6)
-	tst.b		%d1
-	bne.b		_L5_2d
-	bsr.l		stanh			# operand is a NORM
-	bra.b		_L5_6d
-_L5_2d:
-	cmpi.b		%d1,&ZERO		# is operand a ZERO?
-	bne.b		_L5_3d			# no
-	bsr.l		src_zero			# yes
-	bra.b		_L5_6d
-_L5_3d:
-	cmpi.b		%d1,&INF		# is operand an INF?
-	bne.b		_L5_4d			# no
-	bsr.l		src_one			# yes
-	bra.b		_L5_6d
-_L5_4d:
-	cmpi.b		%d1,&QNAN		# is operand a QNAN?
-	bne.b		_L5_5d			# no
-	bsr.l		src_qnan			# yes
-	bra.b		_L5_6d
-_L5_5d:
-	bsr.l		stanhd			# operand is a DENORM
-_L5_6d:
-
-#
-#	Result is now in FP0
-#
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr # restore ctrl regs
-	fmovm.x		EXC_FP1(%a6),&0x40	# restore fp1
-	unlk		%a6
-	rts
-
-	global		_ftanhx_
-_ftanhx_:
-	link		%a6,&-LOCAL_SIZE
-
-	movm.l		&0x0303,EXC_DREGS(%a6)	# save d0-d1/a0-a1
-	fmovm.l		%fpcr,%fpsr,USER_FPCR(%a6) # save ctrl regs
-	fmovm.x		&0xc0,EXC_FP0(%a6)	# save fp0/fp1
-
-	fmov.l		&0x0,%fpcr		# zero FPCR
-
-#
-#	copy, convert, and tag input argument
-#
-	lea		FP_SRC(%a6),%a0
-	mov.l		0x8+0x0(%a6),0x0(%a0)	# load ext input
-	mov.l		0x8+0x4(%a6),0x4(%a0)
-	mov.l		0x8+0x8(%a6),0x8(%a0)
-	bsr.l		tag			# fetch operand type
-	mov.b		%d0,STAG(%a6)
-	mov.b		%d0,%d1
-
-	andi.l		&0x00ff00ff,USER_FPSR(%a6)
-
-	clr.l		%d0
-	mov.b		FPCR_MODE(%a6),%d0	# pass rnd mode,prec
-
-	tst.b		%d1
-	bne.b		_L5_2x
-	bsr.l		stanh			# operand is a NORM
-	bra.b		_L5_6x
-_L5_2x:
-	cmpi.b		%d1,&ZERO		# is operand a ZERO?
-	bne.b		_L5_3x			# no
-	bsr.l		src_zero			# yes
-	bra.b		_L5_6x
-_L5_3x:
-	cmpi.b		%d1,&INF		# is operand an INF?
-	bne.b		_L5_4x			# no
-	bsr.l		src_one			# yes
-	bra.b		_L5_6x
-_L5_4x:
-	cmpi.b		%d1,&QNAN		# is operand a QNAN?
-	bne.b		_L5_5x			# no
-	bsr.l		src_qnan			# yes
-	bra.b		_L5_6x
-_L5_5x:
-	bsr.l		stanhd			# operand is a DENORM
-_L5_6x:
-
-#
-#	Result is now in FP0
-#
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr # restore ctrl regs
-	fmovm.x		EXC_FP1(%a6),&0x40	# restore fp1
-	unlk		%a6
-	rts
-
-
-#########################################################################
-# MONADIC TEMPLATE							#
-#########################################################################
-	global		_fatans_
-_fatans_:
-	link		%a6,&-LOCAL_SIZE
-
-	movm.l		&0x0303,EXC_DREGS(%a6)	# save d0-d1/a0-a1
-	fmovm.l		%fpcr,%fpsr,USER_FPCR(%a6) # save ctrl regs
-	fmovm.x		&0xc0,EXC_FP0(%a6)	# save fp0/fp1
-
-	fmov.l		&0x0,%fpcr		# zero FPCR
-
-#
-#	copy, convert, and tag input argument
-#
-	fmov.s		0x8(%a6),%fp0		# load sgl input
-	fmov.x		%fp0,FP_SRC(%a6)
-	lea		FP_SRC(%a6),%a0
-	bsr.l		tag			# fetch operand type
-	mov.b		%d0,STAG(%a6)
-	mov.b		%d0,%d1
-
-	andi.l		&0x00ff00ff,USER_FPSR(%a6)
-
-	clr.l		%d0
-	mov.b		FPCR_MODE(%a6),%d0	# pass rnd mode,prec
-
-	tst.b		%d1
-	bne.b		_L6_2s
-	bsr.l		satan			# operand is a NORM
-	bra.b		_L6_6s
-_L6_2s:
-	cmpi.b		%d1,&ZERO		# is operand a ZERO?
-	bne.b		_L6_3s			# no
-	bsr.l		src_zero			# yes
-	bra.b		_L6_6s
-_L6_3s:
-	cmpi.b		%d1,&INF		# is operand an INF?
-	bne.b		_L6_4s			# no
-	bsr.l		spi_2			# yes
-	bra.b		_L6_6s
-_L6_4s:
-	cmpi.b		%d1,&QNAN		# is operand a QNAN?
-	bne.b		_L6_5s			# no
-	bsr.l		src_qnan			# yes
-	bra.b		_L6_6s
-_L6_5s:
-	bsr.l		satand			# operand is a DENORM
-_L6_6s:
-
-#
-#	Result is now in FP0
-#
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr # restore ctrl regs
-	fmovm.x		EXC_FP1(%a6),&0x40	# restore fp1
-	unlk		%a6
-	rts
-
-	global		_fatand_
-_fatand_:
-	link		%a6,&-LOCAL_SIZE
-
-	movm.l		&0x0303,EXC_DREGS(%a6)	# save d0-d1/a0-a1
-	fmovm.l		%fpcr,%fpsr,USER_FPCR(%a6) # save ctrl regs
-	fmovm.x		&0xc0,EXC_FP0(%a6)	# save fp0/fp1
-
-	fmov.l		&0x0,%fpcr		# zero FPCR
-
-#
-#	copy, convert, and tag input argument
-#
-	fmov.d		0x8(%a6),%fp0		# load dbl input
-	fmov.x		%fp0,FP_SRC(%a6)
-	lea		FP_SRC(%a6),%a0
-	bsr.l		tag			# fetch operand type
-	mov.b		%d0,STAG(%a6)
-	mov.b		%d0,%d1
-
-	andi.l		&0x00ff00ff,USER_FPSR(%a6)
-
-	clr.l		%d0
-	mov.b		FPCR_MODE(%a6),%d0	# pass rnd mode,prec
-
-	mov.b		%d1,STAG(%a6)
-	tst.b		%d1
-	bne.b		_L6_2d
-	bsr.l		satan			# operand is a NORM
-	bra.b		_L6_6d
-_L6_2d:
-	cmpi.b		%d1,&ZERO		# is operand a ZERO?
-	bne.b		_L6_3d			# no
-	bsr.l		src_zero			# yes
-	bra.b		_L6_6d
-_L6_3d:
-	cmpi.b		%d1,&INF		# is operand an INF?
-	bne.b		_L6_4d			# no
-	bsr.l		spi_2			# yes
-	bra.b		_L6_6d
-_L6_4d:
-	cmpi.b		%d1,&QNAN		# is operand a QNAN?
-	bne.b		_L6_5d			# no
-	bsr.l		src_qnan			# yes
-	bra.b		_L6_6d
-_L6_5d:
-	bsr.l		satand			# operand is a DENORM
-_L6_6d:
-
-#
-#	Result is now in FP0
-#
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr # restore ctrl regs
-	fmovm.x		EXC_FP1(%a6),&0x40	# restore fp1
-	unlk		%a6
-	rts
-
-	global		_fatanx_
-_fatanx_:
-	link		%a6,&-LOCAL_SIZE
-
-	movm.l		&0x0303,EXC_DREGS(%a6)	# save d0-d1/a0-a1
-	fmovm.l		%fpcr,%fpsr,USER_FPCR(%a6) # save ctrl regs
-	fmovm.x		&0xc0,EXC_FP0(%a6)	# save fp0/fp1
-
-	fmov.l		&0x0,%fpcr		# zero FPCR
-
-#
-#	copy, convert, and tag input argument
-#
-	lea		FP_SRC(%a6),%a0
-	mov.l		0x8+0x0(%a6),0x0(%a0)	# load ext input
-	mov.l		0x8+0x4(%a6),0x4(%a0)
-	mov.l		0x8+0x8(%a6),0x8(%a0)
-	bsr.l		tag			# fetch operand type
-	mov.b		%d0,STAG(%a6)
-	mov.b		%d0,%d1
-
-	andi.l		&0x00ff00ff,USER_FPSR(%a6)
-
-	clr.l		%d0
-	mov.b		FPCR_MODE(%a6),%d0	# pass rnd mode,prec
-
-	tst.b		%d1
-	bne.b		_L6_2x
-	bsr.l		satan			# operand is a NORM
-	bra.b		_L6_6x
-_L6_2x:
-	cmpi.b		%d1,&ZERO		# is operand a ZERO?
-	bne.b		_L6_3x			# no
-	bsr.l		src_zero			# yes
-	bra.b		_L6_6x
-_L6_3x:
-	cmpi.b		%d1,&INF		# is operand an INF?
-	bne.b		_L6_4x			# no
-	bsr.l		spi_2			# yes
-	bra.b		_L6_6x
-_L6_4x:
-	cmpi.b		%d1,&QNAN		# is operand a QNAN?
-	bne.b		_L6_5x			# no
-	bsr.l		src_qnan			# yes
-	bra.b		_L6_6x
-_L6_5x:
-	bsr.l		satand			# operand is a DENORM
-_L6_6x:
-
-#
-#	Result is now in FP0
-#
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr # restore ctrl regs
-	fmovm.x		EXC_FP1(%a6),&0x40	# restore fp1
-	unlk		%a6
-	rts
-
-
-#########################################################################
-# MONADIC TEMPLATE							#
-#########################################################################
-	global		_fasins_
-_fasins_:
-	link		%a6,&-LOCAL_SIZE
-
-	movm.l		&0x0303,EXC_DREGS(%a6)	# save d0-d1/a0-a1
-	fmovm.l		%fpcr,%fpsr,USER_FPCR(%a6) # save ctrl regs
-	fmovm.x		&0xc0,EXC_FP0(%a6)	# save fp0/fp1
-
-	fmov.l		&0x0,%fpcr		# zero FPCR
-
-#
-#	copy, convert, and tag input argument
-#
-	fmov.s		0x8(%a6),%fp0		# load sgl input
-	fmov.x		%fp0,FP_SRC(%a6)
-	lea		FP_SRC(%a6),%a0
-	bsr.l		tag			# fetch operand type
-	mov.b		%d0,STAG(%a6)
-	mov.b		%d0,%d1
-
-	andi.l		&0x00ff00ff,USER_FPSR(%a6)
-
-	clr.l		%d0
-	mov.b		FPCR_MODE(%a6),%d0	# pass rnd mode,prec
-
-	tst.b		%d1
-	bne.b		_L7_2s
-	bsr.l		sasin			# operand is a NORM
-	bra.b		_L7_6s
-_L7_2s:
-	cmpi.b		%d1,&ZERO		# is operand a ZERO?
-	bne.b		_L7_3s			# no
-	bsr.l		src_zero			# yes
-	bra.b		_L7_6s
-_L7_3s:
-	cmpi.b		%d1,&INF		# is operand an INF?
-	bne.b		_L7_4s			# no
-	bsr.l		t_operr			# yes
-	bra.b		_L7_6s
-_L7_4s:
-	cmpi.b		%d1,&QNAN		# is operand a QNAN?
-	bne.b		_L7_5s			# no
-	bsr.l		src_qnan			# yes
-	bra.b		_L7_6s
-_L7_5s:
-	bsr.l		sasind			# operand is a DENORM
-_L7_6s:
-
-#
-#	Result is now in FP0
-#
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr # restore ctrl regs
-	fmovm.x		EXC_FP1(%a6),&0x40	# restore fp1
-	unlk		%a6
-	rts
-
-	global		_fasind_
-_fasind_:
-	link		%a6,&-LOCAL_SIZE
-
-	movm.l		&0x0303,EXC_DREGS(%a6)	# save d0-d1/a0-a1
-	fmovm.l		%fpcr,%fpsr,USER_FPCR(%a6) # save ctrl regs
-	fmovm.x		&0xc0,EXC_FP0(%a6)	# save fp0/fp1
-
-	fmov.l		&0x0,%fpcr		# zero FPCR
-
-#
-#	copy, convert, and tag input argument
-#
-	fmov.d		0x8(%a6),%fp0		# load dbl input
-	fmov.x		%fp0,FP_SRC(%a6)
-	lea		FP_SRC(%a6),%a0
-	bsr.l		tag			# fetch operand type
-	mov.b		%d0,STAG(%a6)
-	mov.b		%d0,%d1
-
-	andi.l		&0x00ff00ff,USER_FPSR(%a6)
-
-	clr.l		%d0
-	mov.b		FPCR_MODE(%a6),%d0	# pass rnd mode,prec
-
-	mov.b		%d1,STAG(%a6)
-	tst.b		%d1
-	bne.b		_L7_2d
-	bsr.l		sasin			# operand is a NORM
-	bra.b		_L7_6d
-_L7_2d:
-	cmpi.b		%d1,&ZERO		# is operand a ZERO?
-	bne.b		_L7_3d			# no
-	bsr.l		src_zero			# yes
-	bra.b		_L7_6d
-_L7_3d:
-	cmpi.b		%d1,&INF		# is operand an INF?
-	bne.b		_L7_4d			# no
-	bsr.l		t_operr			# yes
-	bra.b		_L7_6d
-_L7_4d:
-	cmpi.b		%d1,&QNAN		# is operand a QNAN?
-	bne.b		_L7_5d			# no
-	bsr.l		src_qnan			# yes
-	bra.b		_L7_6d
-_L7_5d:
-	bsr.l		sasind			# operand is a DENORM
-_L7_6d:
-
-#
-#	Result is now in FP0
-#
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr # restore ctrl regs
-	fmovm.x		EXC_FP1(%a6),&0x40	# restore fp1
-	unlk		%a6
-	rts
-
-	global		_fasinx_
-_fasinx_:
-	link		%a6,&-LOCAL_SIZE
-
-	movm.l		&0x0303,EXC_DREGS(%a6)	# save d0-d1/a0-a1
-	fmovm.l		%fpcr,%fpsr,USER_FPCR(%a6) # save ctrl regs
-	fmovm.x		&0xc0,EXC_FP0(%a6)	# save fp0/fp1
-
-	fmov.l		&0x0,%fpcr		# zero FPCR
-
-#
-#	copy, convert, and tag input argument
-#
-	lea		FP_SRC(%a6),%a0
-	mov.l		0x8+0x0(%a6),0x0(%a0)	# load ext input
-	mov.l		0x8+0x4(%a6),0x4(%a0)
-	mov.l		0x8+0x8(%a6),0x8(%a0)
-	bsr.l		tag			# fetch operand type
-	mov.b		%d0,STAG(%a6)
-	mov.b		%d0,%d1
-
-	andi.l		&0x00ff00ff,USER_FPSR(%a6)
-
-	clr.l		%d0
-	mov.b		FPCR_MODE(%a6),%d0	# pass rnd mode,prec
-
-	tst.b		%d1
-	bne.b		_L7_2x
-	bsr.l		sasin			# operand is a NORM
-	bra.b		_L7_6x
-_L7_2x:
-	cmpi.b		%d1,&ZERO		# is operand a ZERO?
-	bne.b		_L7_3x			# no
-	bsr.l		src_zero			# yes
-	bra.b		_L7_6x
-_L7_3x:
-	cmpi.b		%d1,&INF		# is operand an INF?
-	bne.b		_L7_4x			# no
-	bsr.l		t_operr			# yes
-	bra.b		_L7_6x
-_L7_4x:
-	cmpi.b		%d1,&QNAN		# is operand a QNAN?
-	bne.b		_L7_5x			# no
-	bsr.l		src_qnan			# yes
-	bra.b		_L7_6x
-_L7_5x:
-	bsr.l		sasind			# operand is a DENORM
-_L7_6x:
-
-#
-#	Result is now in FP0
-#
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr # restore ctrl regs
-	fmovm.x		EXC_FP1(%a6),&0x40	# restore fp1
-	unlk		%a6
-	rts
-
-
-#########################################################################
-# MONADIC TEMPLATE							#
-#########################################################################
-	global		_fatanhs_
-_fatanhs_:
-	link		%a6,&-LOCAL_SIZE
-
-	movm.l		&0x0303,EXC_DREGS(%a6)	# save d0-d1/a0-a1
-	fmovm.l		%fpcr,%fpsr,USER_FPCR(%a6) # save ctrl regs
-	fmovm.x		&0xc0,EXC_FP0(%a6)	# save fp0/fp1
-
-	fmov.l		&0x0,%fpcr		# zero FPCR
-
-#
-#	copy, convert, and tag input argument
-#
-	fmov.s		0x8(%a6),%fp0		# load sgl input
-	fmov.x		%fp0,FP_SRC(%a6)
-	lea		FP_SRC(%a6),%a0
-	bsr.l		tag			# fetch operand type
-	mov.b		%d0,STAG(%a6)
-	mov.b		%d0,%d1
-
-	andi.l		&0x00ff00ff,USER_FPSR(%a6)
-
-	clr.l		%d0
-	mov.b		FPCR_MODE(%a6),%d0	# pass rnd mode,prec
-
-	tst.b		%d1
-	bne.b		_L8_2s
-	bsr.l		satanh			# operand is a NORM
-	bra.b		_L8_6s
-_L8_2s:
-	cmpi.b		%d1,&ZERO		# is operand a ZERO?
-	bne.b		_L8_3s			# no
-	bsr.l		src_zero			# yes
-	bra.b		_L8_6s
-_L8_3s:
-	cmpi.b		%d1,&INF		# is operand an INF?
-	bne.b		_L8_4s			# no
-	bsr.l		t_operr			# yes
-	bra.b		_L8_6s
-_L8_4s:
-	cmpi.b		%d1,&QNAN		# is operand a QNAN?
-	bne.b		_L8_5s			# no
-	bsr.l		src_qnan			# yes
-	bra.b		_L8_6s
-_L8_5s:
-	bsr.l		satanhd			# operand is a DENORM
-_L8_6s:
-
-#
-#	Result is now in FP0
-#
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr # restore ctrl regs
-	fmovm.x		EXC_FP1(%a6),&0x40	# restore fp1
-	unlk		%a6
-	rts
-
-	global		_fatanhd_
-_fatanhd_:
-	link		%a6,&-LOCAL_SIZE
-
-	movm.l		&0x0303,EXC_DREGS(%a6)	# save d0-d1/a0-a1
-	fmovm.l		%fpcr,%fpsr,USER_FPCR(%a6) # save ctrl regs
-	fmovm.x		&0xc0,EXC_FP0(%a6)	# save fp0/fp1
-
-	fmov.l		&0x0,%fpcr		# zero FPCR
-
-#
-#	copy, convert, and tag input argument
-#
-	fmov.d		0x8(%a6),%fp0		# load dbl input
-	fmov.x		%fp0,FP_SRC(%a6)
-	lea		FP_SRC(%a6),%a0
-	bsr.l		tag			# fetch operand type
-	mov.b		%d0,STAG(%a6)
-	mov.b		%d0,%d1
-
-	andi.l		&0x00ff00ff,USER_FPSR(%a6)
-
-	clr.l		%d0
-	mov.b		FPCR_MODE(%a6),%d0	# pass rnd mode,prec
-
-	mov.b		%d1,STAG(%a6)
-	tst.b		%d1
-	bne.b		_L8_2d
-	bsr.l		satanh			# operand is a NORM
-	bra.b		_L8_6d
-_L8_2d:
-	cmpi.b		%d1,&ZERO		# is operand a ZERO?
-	bne.b		_L8_3d			# no
-	bsr.l		src_zero			# yes
-	bra.b		_L8_6d
-_L8_3d:
-	cmpi.b		%d1,&INF		# is operand an INF?
-	bne.b		_L8_4d			# no
-	bsr.l		t_operr			# yes
-	bra.b		_L8_6d
-_L8_4d:
-	cmpi.b		%d1,&QNAN		# is operand a QNAN?
-	bne.b		_L8_5d			# no
-	bsr.l		src_qnan			# yes
-	bra.b		_L8_6d
-_L8_5d:
-	bsr.l		satanhd			# operand is a DENORM
-_L8_6d:
-
-#
-#	Result is now in FP0
-#
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr # restore ctrl regs
-	fmovm.x		EXC_FP1(%a6),&0x40	# restore fp1
-	unlk		%a6
-	rts
-
-	global		_fatanhx_
-_fatanhx_:
-	link		%a6,&-LOCAL_SIZE
-
-	movm.l		&0x0303,EXC_DREGS(%a6)	# save d0-d1/a0-a1
-	fmovm.l		%fpcr,%fpsr,USER_FPCR(%a6) # save ctrl regs
-	fmovm.x		&0xc0,EXC_FP0(%a6)	# save fp0/fp1
-
-	fmov.l		&0x0,%fpcr		# zero FPCR
-
-#
-#	copy, convert, and tag input argument
-#
-	lea		FP_SRC(%a6),%a0
-	mov.l		0x8+0x0(%a6),0x0(%a0)	# load ext input
-	mov.l		0x8+0x4(%a6),0x4(%a0)
-	mov.l		0x8+0x8(%a6),0x8(%a0)
-	bsr.l		tag			# fetch operand type
-	mov.b		%d0,STAG(%a6)
-	mov.b		%d0,%d1
-
-	andi.l		&0x00ff00ff,USER_FPSR(%a6)
-
-	clr.l		%d0
-	mov.b		FPCR_MODE(%a6),%d0	# pass rnd mode,prec
-
-	tst.b		%d1
-	bne.b		_L8_2x
-	bsr.l		satanh			# operand is a NORM
-	bra.b		_L8_6x
-_L8_2x:
-	cmpi.b		%d1,&ZERO		# is operand a ZERO?
-	bne.b		_L8_3x			# no
-	bsr.l		src_zero			# yes
-	bra.b		_L8_6x
-_L8_3x:
-	cmpi.b		%d1,&INF		# is operand an INF?
-	bne.b		_L8_4x			# no
-	bsr.l		t_operr			# yes
-	bra.b		_L8_6x
-_L8_4x:
-	cmpi.b		%d1,&QNAN		# is operand a QNAN?
-	bne.b		_L8_5x			# no
-	bsr.l		src_qnan			# yes
-	bra.b		_L8_6x
-_L8_5x:
-	bsr.l		satanhd			# operand is a DENORM
-_L8_6x:
-
-#
-#	Result is now in FP0
-#
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr # restore ctrl regs
-	fmovm.x		EXC_FP1(%a6),&0x40	# restore fp1
-	unlk		%a6
-	rts
-
-
-#########################################################################
-# MONADIC TEMPLATE							#
-#########################################################################
-	global		_ftans_
-_ftans_:
-	link		%a6,&-LOCAL_SIZE
-
-	movm.l		&0x0303,EXC_DREGS(%a6)	# save d0-d1/a0-a1
-	fmovm.l		%fpcr,%fpsr,USER_FPCR(%a6) # save ctrl regs
-	fmovm.x		&0xc0,EXC_FP0(%a6)	# save fp0/fp1
-
-	fmov.l		&0x0,%fpcr		# zero FPCR
-
-#
-#	copy, convert, and tag input argument
-#
-	fmov.s		0x8(%a6),%fp0		# load sgl input
-	fmov.x		%fp0,FP_SRC(%a6)
-	lea		FP_SRC(%a6),%a0
-	bsr.l		tag			# fetch operand type
-	mov.b		%d0,STAG(%a6)
-	mov.b		%d0,%d1
-
-	andi.l		&0x00ff00ff,USER_FPSR(%a6)
-
-	clr.l		%d0
-	mov.b		FPCR_MODE(%a6),%d0	# pass rnd mode,prec
-
-	tst.b		%d1
-	bne.b		_L9_2s
-	bsr.l		stan			# operand is a NORM
-	bra.b		_L9_6s
-_L9_2s:
-	cmpi.b		%d1,&ZERO		# is operand a ZERO?
-	bne.b		_L9_3s			# no
-	bsr.l		src_zero			# yes
-	bra.b		_L9_6s
-_L9_3s:
-	cmpi.b		%d1,&INF		# is operand an INF?
-	bne.b		_L9_4s			# no
-	bsr.l		t_operr			# yes
-	bra.b		_L9_6s
-_L9_4s:
-	cmpi.b		%d1,&QNAN		# is operand a QNAN?
-	bne.b		_L9_5s			# no
-	bsr.l		src_qnan			# yes
-	bra.b		_L9_6s
-_L9_5s:
-	bsr.l		stand			# operand is a DENORM
-_L9_6s:
-
-#
-#	Result is now in FP0
-#
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr # restore ctrl regs
-	fmovm.x		EXC_FP1(%a6),&0x40	# restore fp1
-	unlk		%a6
-	rts
-
-	global		_ftand_
-_ftand_:
-	link		%a6,&-LOCAL_SIZE
-
-	movm.l		&0x0303,EXC_DREGS(%a6)	# save d0-d1/a0-a1
-	fmovm.l		%fpcr,%fpsr,USER_FPCR(%a6) # save ctrl regs
-	fmovm.x		&0xc0,EXC_FP0(%a6)	# save fp0/fp1
-
-	fmov.l		&0x0,%fpcr		# zero FPCR
-
-#
-#	copy, convert, and tag input argument
-#
-	fmov.d		0x8(%a6),%fp0		# load dbl input
-	fmov.x		%fp0,FP_SRC(%a6)
-	lea		FP_SRC(%a6),%a0
-	bsr.l		tag			# fetch operand type
-	mov.b		%d0,STAG(%a6)
-	mov.b		%d0,%d1
-
-	andi.l		&0x00ff00ff,USER_FPSR(%a6)
-
-	clr.l		%d0
-	mov.b		FPCR_MODE(%a6),%d0	# pass rnd mode,prec
-
-	mov.b		%d1,STAG(%a6)
-	tst.b		%d1
-	bne.b		_L9_2d
-	bsr.l		stan			# operand is a NORM
-	bra.b		_L9_6d
-_L9_2d:
-	cmpi.b		%d1,&ZERO		# is operand a ZERO?
-	bne.b		_L9_3d			# no
-	bsr.l		src_zero			# yes
-	bra.b		_L9_6d
-_L9_3d:
-	cmpi.b		%d1,&INF		# is operand an INF?
-	bne.b		_L9_4d			# no
-	bsr.l		t_operr			# yes
-	bra.b		_L9_6d
-_L9_4d:
-	cmpi.b		%d1,&QNAN		# is operand a QNAN?
-	bne.b		_L9_5d			# no
-	bsr.l		src_qnan			# yes
-	bra.b		_L9_6d
-_L9_5d:
-	bsr.l		stand			# operand is a DENORM
-_L9_6d:
-
-#
-#	Result is now in FP0
-#
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr # restore ctrl regs
-	fmovm.x		EXC_FP1(%a6),&0x40	# restore fp1
-	unlk		%a6
-	rts
-
-	global		_ftanx_
-_ftanx_:
-	link		%a6,&-LOCAL_SIZE
-
-	movm.l		&0x0303,EXC_DREGS(%a6)	# save d0-d1/a0-a1
-	fmovm.l		%fpcr,%fpsr,USER_FPCR(%a6) # save ctrl regs
-	fmovm.x		&0xc0,EXC_FP0(%a6)	# save fp0/fp1
-
-	fmov.l		&0x0,%fpcr		# zero FPCR
-
-#
-#	copy, convert, and tag input argument
-#
-	lea		FP_SRC(%a6),%a0
-	mov.l		0x8+0x0(%a6),0x0(%a0)	# load ext input
-	mov.l		0x8+0x4(%a6),0x4(%a0)
-	mov.l		0x8+0x8(%a6),0x8(%a0)
-	bsr.l		tag			# fetch operand type
-	mov.b		%d0,STAG(%a6)
-	mov.b		%d0,%d1
-
-	andi.l		&0x00ff00ff,USER_FPSR(%a6)
-
-	clr.l		%d0
-	mov.b		FPCR_MODE(%a6),%d0	# pass rnd mode,prec
-
-	tst.b		%d1
-	bne.b		_L9_2x
-	bsr.l		stan			# operand is a NORM
-	bra.b		_L9_6x
-_L9_2x:
-	cmpi.b		%d1,&ZERO		# is operand a ZERO?
-	bne.b		_L9_3x			# no
-	bsr.l		src_zero			# yes
-	bra.b		_L9_6x
-_L9_3x:
-	cmpi.b		%d1,&INF		# is operand an INF?
-	bne.b		_L9_4x			# no
-	bsr.l		t_operr			# yes
-	bra.b		_L9_6x
-_L9_4x:
-	cmpi.b		%d1,&QNAN		# is operand a QNAN?
-	bne.b		_L9_5x			# no
-	bsr.l		src_qnan			# yes
-	bra.b		_L9_6x
-_L9_5x:
-	bsr.l		stand			# operand is a DENORM
-_L9_6x:
-
-#
-#	Result is now in FP0
-#
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr # restore ctrl regs
-	fmovm.x		EXC_FP1(%a6),&0x40	# restore fp1
-	unlk		%a6
-	rts
-
-
-#########################################################################
-# MONADIC TEMPLATE							#
-#########################################################################
-	global		_fetoxs_
-_fetoxs_:
-	link		%a6,&-LOCAL_SIZE
-
-	movm.l		&0x0303,EXC_DREGS(%a6)	# save d0-d1/a0-a1
-	fmovm.l		%fpcr,%fpsr,USER_FPCR(%a6) # save ctrl regs
-	fmovm.x		&0xc0,EXC_FP0(%a6)	# save fp0/fp1
-
-	fmov.l		&0x0,%fpcr		# zero FPCR
-
-#
-#	copy, convert, and tag input argument
-#
-	fmov.s		0x8(%a6),%fp0		# load sgl input
-	fmov.x		%fp0,FP_SRC(%a6)
-	lea		FP_SRC(%a6),%a0
-	bsr.l		tag			# fetch operand type
-	mov.b		%d0,STAG(%a6)
-	mov.b		%d0,%d1
-
-	andi.l		&0x00ff00ff,USER_FPSR(%a6)
-
-	clr.l		%d0
-	mov.b		FPCR_MODE(%a6),%d0	# pass rnd mode,prec
-
-	tst.b		%d1
-	bne.b		_L10_2s
-	bsr.l		setox			# operand is a NORM
-	bra.b		_L10_6s
-_L10_2s:
-	cmpi.b		%d1,&ZERO		# is operand a ZERO?
-	bne.b		_L10_3s			# no
-	bsr.l		ld_pone			# yes
-	bra.b		_L10_6s
-_L10_3s:
-	cmpi.b		%d1,&INF		# is operand an INF?
-	bne.b		_L10_4s			# no
-	bsr.l		szr_inf			# yes
-	bra.b		_L10_6s
-_L10_4s:
-	cmpi.b		%d1,&QNAN		# is operand a QNAN?
-	bne.b		_L10_5s			# no
-	bsr.l		src_qnan			# yes
-	bra.b		_L10_6s
-_L10_5s:
-	bsr.l		setoxd			# operand is a DENORM
-_L10_6s:
-
-#
-#	Result is now in FP0
-#
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr # restore ctrl regs
-	fmovm.x		EXC_FP1(%a6),&0x40	# restore fp1
-	unlk		%a6
-	rts
-
-	global		_fetoxd_
-_fetoxd_:
-	link		%a6,&-LOCAL_SIZE
-
-	movm.l		&0x0303,EXC_DREGS(%a6)	# save d0-d1/a0-a1
-	fmovm.l		%fpcr,%fpsr,USER_FPCR(%a6) # save ctrl regs
-	fmovm.x		&0xc0,EXC_FP0(%a6)	# save fp0/fp1
-
-	fmov.l		&0x0,%fpcr		# zero FPCR
-
-#
-#	copy, convert, and tag input argument
-#
-	fmov.d		0x8(%a6),%fp0		# load dbl input
-	fmov.x		%fp0,FP_SRC(%a6)
-	lea		FP_SRC(%a6),%a0
-	bsr.l		tag			# fetch operand type
-	mov.b		%d0,STAG(%a6)
-	mov.b		%d0,%d1
-
-	andi.l		&0x00ff00ff,USER_FPSR(%a6)
-
-	clr.l		%d0
-	mov.b		FPCR_MODE(%a6),%d0	# pass rnd mode,prec
-
-	mov.b		%d1,STAG(%a6)
-	tst.b		%d1
-	bne.b		_L10_2d
-	bsr.l		setox			# operand is a NORM
-	bra.b		_L10_6d
-_L10_2d:
-	cmpi.b		%d1,&ZERO		# is operand a ZERO?
-	bne.b		_L10_3d			# no
-	bsr.l		ld_pone			# yes
-	bra.b		_L10_6d
-_L10_3d:
-	cmpi.b		%d1,&INF		# is operand an INF?
-	bne.b		_L10_4d			# no
-	bsr.l		szr_inf			# yes
-	bra.b		_L10_6d
-_L10_4d:
-	cmpi.b		%d1,&QNAN		# is operand a QNAN?
-	bne.b		_L10_5d			# no
-	bsr.l		src_qnan			# yes
-	bra.b		_L10_6d
-_L10_5d:
-	bsr.l		setoxd			# operand is a DENORM
-_L10_6d:
-
-#
-#	Result is now in FP0
-#
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr # restore ctrl regs
-	fmovm.x		EXC_FP1(%a6),&0x40	# restore fp1
-	unlk		%a6
-	rts
-
-	global		_fetoxx_
-_fetoxx_:
-	link		%a6,&-LOCAL_SIZE
-
-	movm.l		&0x0303,EXC_DREGS(%a6)	# save d0-d1/a0-a1
-	fmovm.l		%fpcr,%fpsr,USER_FPCR(%a6) # save ctrl regs
-	fmovm.x		&0xc0,EXC_FP0(%a6)	# save fp0/fp1
-
-	fmov.l		&0x0,%fpcr		# zero FPCR
-
-#
-#	copy, convert, and tag input argument
-#
-	lea		FP_SRC(%a6),%a0
-	mov.l		0x8+0x0(%a6),0x0(%a0)	# load ext input
-	mov.l		0x8+0x4(%a6),0x4(%a0)
-	mov.l		0x8+0x8(%a6),0x8(%a0)
-	bsr.l		tag			# fetch operand type
-	mov.b		%d0,STAG(%a6)
-	mov.b		%d0,%d1
-
-	andi.l		&0x00ff00ff,USER_FPSR(%a6)
-
-	clr.l		%d0
-	mov.b		FPCR_MODE(%a6),%d0	# pass rnd mode,prec
-
-	tst.b		%d1
-	bne.b		_L10_2x
-	bsr.l		setox			# operand is a NORM
-	bra.b		_L10_6x
-_L10_2x:
-	cmpi.b		%d1,&ZERO		# is operand a ZERO?
-	bne.b		_L10_3x			# no
-	bsr.l		ld_pone			# yes
-	bra.b		_L10_6x
-_L10_3x:
-	cmpi.b		%d1,&INF		# is operand an INF?
-	bne.b		_L10_4x			# no
-	bsr.l		szr_inf			# yes
-	bra.b		_L10_6x
-_L10_4x:
-	cmpi.b		%d1,&QNAN		# is operand a QNAN?
-	bne.b		_L10_5x			# no
-	bsr.l		src_qnan			# yes
-	bra.b		_L10_6x
-_L10_5x:
-	bsr.l		setoxd			# operand is a DENORM
-_L10_6x:
-
-#
-#	Result is now in FP0
-#
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr # restore ctrl regs
-	fmovm.x		EXC_FP1(%a6),&0x40	# restore fp1
-	unlk		%a6
-	rts
-
-
-#########################################################################
-# MONADIC TEMPLATE							#
-#########################################################################
-	global		_ftwotoxs_
-_ftwotoxs_:
-	link		%a6,&-LOCAL_SIZE
-
-	movm.l		&0x0303,EXC_DREGS(%a6)	# save d0-d1/a0-a1
-	fmovm.l		%fpcr,%fpsr,USER_FPCR(%a6) # save ctrl regs
-	fmovm.x		&0xc0,EXC_FP0(%a6)	# save fp0/fp1
-
-	fmov.l		&0x0,%fpcr		# zero FPCR
-
-#
-#	copy, convert, and tag input argument
-#
-	fmov.s		0x8(%a6),%fp0		# load sgl input
-	fmov.x		%fp0,FP_SRC(%a6)
-	lea		FP_SRC(%a6),%a0
-	bsr.l		tag			# fetch operand type
-	mov.b		%d0,STAG(%a6)
-	mov.b		%d0,%d1
-
-	andi.l		&0x00ff00ff,USER_FPSR(%a6)
-
-	clr.l		%d0
-	mov.b		FPCR_MODE(%a6),%d0	# pass rnd mode,prec
-
-	tst.b		%d1
-	bne.b		_L11_2s
-	bsr.l		stwotox			# operand is a NORM
-	bra.b		_L11_6s
-_L11_2s:
-	cmpi.b		%d1,&ZERO		# is operand a ZERO?
-	bne.b		_L11_3s			# no
-	bsr.l		ld_pone			# yes
-	bra.b		_L11_6s
-_L11_3s:
-	cmpi.b		%d1,&INF		# is operand an INF?
-	bne.b		_L11_4s			# no
-	bsr.l		szr_inf			# yes
-	bra.b		_L11_6s
-_L11_4s:
-	cmpi.b		%d1,&QNAN		# is operand a QNAN?
-	bne.b		_L11_5s			# no
-	bsr.l		src_qnan			# yes
-	bra.b		_L11_6s
-_L11_5s:
-	bsr.l		stwotoxd			# operand is a DENORM
-_L11_6s:
-
-#
-#	Result is now in FP0
-#
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr # restore ctrl regs
-	fmovm.x		EXC_FP1(%a6),&0x40	# restore fp1
-	unlk		%a6
-	rts
-
-	global		_ftwotoxd_
-_ftwotoxd_:
-	link		%a6,&-LOCAL_SIZE
-
-	movm.l		&0x0303,EXC_DREGS(%a6)	# save d0-d1/a0-a1
-	fmovm.l		%fpcr,%fpsr,USER_FPCR(%a6) # save ctrl regs
-	fmovm.x		&0xc0,EXC_FP0(%a6)	# save fp0/fp1
-
-	fmov.l		&0x0,%fpcr		# zero FPCR
-
-#
-#	copy, convert, and tag input argument
-#
-	fmov.d		0x8(%a6),%fp0		# load dbl input
-	fmov.x		%fp0,FP_SRC(%a6)
-	lea		FP_SRC(%a6),%a0
-	bsr.l		tag			# fetch operand type
-	mov.b		%d0,STAG(%a6)
-	mov.b		%d0,%d1
-
-	andi.l		&0x00ff00ff,USER_FPSR(%a6)
-
-	clr.l		%d0
-	mov.b		FPCR_MODE(%a6),%d0	# pass rnd mode,prec
-
-	mov.b		%d1,STAG(%a6)
-	tst.b		%d1
-	bne.b		_L11_2d
-	bsr.l		stwotox			# operand is a NORM
-	bra.b		_L11_6d
-_L11_2d:
-	cmpi.b		%d1,&ZERO		# is operand a ZERO?
-	bne.b		_L11_3d			# no
-	bsr.l		ld_pone			# yes
-	bra.b		_L11_6d
-_L11_3d:
-	cmpi.b		%d1,&INF		# is operand an INF?
-	bne.b		_L11_4d			# no
-	bsr.l		szr_inf			# yes
-	bra.b		_L11_6d
-_L11_4d:
-	cmpi.b		%d1,&QNAN		# is operand a QNAN?
-	bne.b		_L11_5d			# no
-	bsr.l		src_qnan			# yes
-	bra.b		_L11_6d
-_L11_5d:
-	bsr.l		stwotoxd			# operand is a DENORM
-_L11_6d:
-
-#
-#	Result is now in FP0
-#
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr # restore ctrl regs
-	fmovm.x		EXC_FP1(%a6),&0x40	# restore fp1
-	unlk		%a6
-	rts
-
-	global		_ftwotoxx_
-_ftwotoxx_:
-	link		%a6,&-LOCAL_SIZE
-
-	movm.l		&0x0303,EXC_DREGS(%a6)	# save d0-d1/a0-a1
-	fmovm.l		%fpcr,%fpsr,USER_FPCR(%a6) # save ctrl regs
-	fmovm.x		&0xc0,EXC_FP0(%a6)	# save fp0/fp1
-
-	fmov.l		&0x0,%fpcr		# zero FPCR
-
-#
-#	copy, convert, and tag input argument
-#
-	lea		FP_SRC(%a6),%a0
-	mov.l		0x8+0x0(%a6),0x0(%a0)	# load ext input
-	mov.l		0x8+0x4(%a6),0x4(%a0)
-	mov.l		0x8+0x8(%a6),0x8(%a0)
-	bsr.l		tag			# fetch operand type
-	mov.b		%d0,STAG(%a6)
-	mov.b		%d0,%d1
-
-	andi.l		&0x00ff00ff,USER_FPSR(%a6)
-
-	clr.l		%d0
-	mov.b		FPCR_MODE(%a6),%d0	# pass rnd mode,prec
-
-	tst.b		%d1
-	bne.b		_L11_2x
-	bsr.l		stwotox			# operand is a NORM
-	bra.b		_L11_6x
-_L11_2x:
-	cmpi.b		%d1,&ZERO		# is operand a ZERO?
-	bne.b		_L11_3x			# no
-	bsr.l		ld_pone			# yes
-	bra.b		_L11_6x
-_L11_3x:
-	cmpi.b		%d1,&INF		# is operand an INF?
-	bne.b		_L11_4x			# no
-	bsr.l		szr_inf			# yes
-	bra.b		_L11_6x
-_L11_4x:
-	cmpi.b		%d1,&QNAN		# is operand a QNAN?
-	bne.b		_L11_5x			# no
-	bsr.l		src_qnan			# yes
-	bra.b		_L11_6x
-_L11_5x:
-	bsr.l		stwotoxd			# operand is a DENORM
-_L11_6x:
-
-#
-#	Result is now in FP0
-#
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr # restore ctrl regs
-	fmovm.x		EXC_FP1(%a6),&0x40	# restore fp1
-	unlk		%a6
-	rts
-
-
-#########################################################################
-# MONADIC TEMPLATE							#
-#########################################################################
-	global		_ftentoxs_
-_ftentoxs_:
-	link		%a6,&-LOCAL_SIZE
-
-	movm.l		&0x0303,EXC_DREGS(%a6)	# save d0-d1/a0-a1
-	fmovm.l		%fpcr,%fpsr,USER_FPCR(%a6) # save ctrl regs
-	fmovm.x		&0xc0,EXC_FP0(%a6)	# save fp0/fp1
-
-	fmov.l		&0x0,%fpcr		# zero FPCR
-
-#
-#	copy, convert, and tag input argument
-#
-	fmov.s		0x8(%a6),%fp0		# load sgl input
-	fmov.x		%fp0,FP_SRC(%a6)
-	lea		FP_SRC(%a6),%a0
-	bsr.l		tag			# fetch operand type
-	mov.b		%d0,STAG(%a6)
-	mov.b		%d0,%d1
-
-	andi.l		&0x00ff00ff,USER_FPSR(%a6)
-
-	clr.l		%d0
-	mov.b		FPCR_MODE(%a6),%d0	# pass rnd mode,prec
-
-	tst.b		%d1
-	bne.b		_L12_2s
-	bsr.l		stentox			# operand is a NORM
-	bra.b		_L12_6s
-_L12_2s:
-	cmpi.b		%d1,&ZERO		# is operand a ZERO?
-	bne.b		_L12_3s			# no
-	bsr.l		ld_pone			# yes
-	bra.b		_L12_6s
-_L12_3s:
-	cmpi.b		%d1,&INF		# is operand an INF?
-	bne.b		_L12_4s			# no
-	bsr.l		szr_inf			# yes
-	bra.b		_L12_6s
-_L12_4s:
-	cmpi.b		%d1,&QNAN		# is operand a QNAN?
-	bne.b		_L12_5s			# no
-	bsr.l		src_qnan			# yes
-	bra.b		_L12_6s
-_L12_5s:
-	bsr.l		stentoxd			# operand is a DENORM
-_L12_6s:
-
-#
-#	Result is now in FP0
-#
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr # restore ctrl regs
-	fmovm.x		EXC_FP1(%a6),&0x40	# restore fp1
-	unlk		%a6
-	rts
-
-	global		_ftentoxd_
-_ftentoxd_:
-	link		%a6,&-LOCAL_SIZE
-
-	movm.l		&0x0303,EXC_DREGS(%a6)	# save d0-d1/a0-a1
-	fmovm.l		%fpcr,%fpsr,USER_FPCR(%a6) # save ctrl regs
-	fmovm.x		&0xc0,EXC_FP0(%a6)	# save fp0/fp1
-
-	fmov.l		&0x0,%fpcr		# zero FPCR
-
-#
-#	copy, convert, and tag input argument
-#
-	fmov.d		0x8(%a6),%fp0		# load dbl input
-	fmov.x		%fp0,FP_SRC(%a6)
-	lea		FP_SRC(%a6),%a0
-	bsr.l		tag			# fetch operand type
-	mov.b		%d0,STAG(%a6)
-	mov.b		%d0,%d1
-
-	andi.l		&0x00ff00ff,USER_FPSR(%a6)
-
-	clr.l		%d0
-	mov.b		FPCR_MODE(%a6),%d0	# pass rnd mode,prec
-
-	mov.b		%d1,STAG(%a6)
-	tst.b		%d1
-	bne.b		_L12_2d
-	bsr.l		stentox			# operand is a NORM
-	bra.b		_L12_6d
-_L12_2d:
-	cmpi.b		%d1,&ZERO		# is operand a ZERO?
-	bne.b		_L12_3d			# no
-	bsr.l		ld_pone			# yes
-	bra.b		_L12_6d
-_L12_3d:
-	cmpi.b		%d1,&INF		# is operand an INF?
-	bne.b		_L12_4d			# no
-	bsr.l		szr_inf			# yes
-	bra.b		_L12_6d
-_L12_4d:
-	cmpi.b		%d1,&QNAN		# is operand a QNAN?
-	bne.b		_L12_5d			# no
-	bsr.l		src_qnan			# yes
-	bra.b		_L12_6d
-_L12_5d:
-	bsr.l		stentoxd			# operand is a DENORM
-_L12_6d:
-
-#
-#	Result is now in FP0
-#
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr # restore ctrl regs
-	fmovm.x		EXC_FP1(%a6),&0x40	# restore fp1
-	unlk		%a6
-	rts
-
-	global		_ftentoxx_
-_ftentoxx_:
-	link		%a6,&-LOCAL_SIZE
-
-	movm.l		&0x0303,EXC_DREGS(%a6)	# save d0-d1/a0-a1
-	fmovm.l		%fpcr,%fpsr,USER_FPCR(%a6) # save ctrl regs
-	fmovm.x		&0xc0,EXC_FP0(%a6)	# save fp0/fp1
-
-	fmov.l		&0x0,%fpcr		# zero FPCR
-
-#
-#	copy, convert, and tag input argument
-#
-	lea		FP_SRC(%a6),%a0
-	mov.l		0x8+0x0(%a6),0x0(%a0)	# load ext input
-	mov.l		0x8+0x4(%a6),0x4(%a0)
-	mov.l		0x8+0x8(%a6),0x8(%a0)
-	bsr.l		tag			# fetch operand type
-	mov.b		%d0,STAG(%a6)
-	mov.b		%d0,%d1
-
-	andi.l		&0x00ff00ff,USER_FPSR(%a6)
-
-	clr.l		%d0
-	mov.b		FPCR_MODE(%a6),%d0	# pass rnd mode,prec
-
-	tst.b		%d1
-	bne.b		_L12_2x
-	bsr.l		stentox			# operand is a NORM
-	bra.b		_L12_6x
-_L12_2x:
-	cmpi.b		%d1,&ZERO		# is operand a ZERO?
-	bne.b		_L12_3x			# no
-	bsr.l		ld_pone			# yes
-	bra.b		_L12_6x
-_L12_3x:
-	cmpi.b		%d1,&INF		# is operand an INF?
-	bne.b		_L12_4x			# no
-	bsr.l		szr_inf			# yes
-	bra.b		_L12_6x
-_L12_4x:
-	cmpi.b		%d1,&QNAN		# is operand a QNAN?
-	bne.b		_L12_5x			# no
-	bsr.l		src_qnan			# yes
-	bra.b		_L12_6x
-_L12_5x:
-	bsr.l		stentoxd			# operand is a DENORM
-_L12_6x:
-
-#
-#	Result is now in FP0
-#
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr # restore ctrl regs
-	fmovm.x		EXC_FP1(%a6),&0x40	# restore fp1
-	unlk		%a6
-	rts
-
-
-#########################################################################
-# MONADIC TEMPLATE							#
-#########################################################################
-	global		_flogns_
-_flogns_:
-	link		%a6,&-LOCAL_SIZE
-
-	movm.l		&0x0303,EXC_DREGS(%a6)	# save d0-d1/a0-a1
-	fmovm.l		%fpcr,%fpsr,USER_FPCR(%a6) # save ctrl regs
-	fmovm.x		&0xc0,EXC_FP0(%a6)	# save fp0/fp1
-
-	fmov.l		&0x0,%fpcr		# zero FPCR
-
-#
-#	copy, convert, and tag input argument
-#
-	fmov.s		0x8(%a6),%fp0		# load sgl input
-	fmov.x		%fp0,FP_SRC(%a6)
-	lea		FP_SRC(%a6),%a0
-	bsr.l		tag			# fetch operand type
-	mov.b		%d0,STAG(%a6)
-	mov.b		%d0,%d1
-
-	andi.l		&0x00ff00ff,USER_FPSR(%a6)
-
-	clr.l		%d0
-	mov.b		FPCR_MODE(%a6),%d0	# pass rnd mode,prec
-
-	tst.b		%d1
-	bne.b		_L13_2s
-	bsr.l		slogn			# operand is a NORM
-	bra.b		_L13_6s
-_L13_2s:
-	cmpi.b		%d1,&ZERO		# is operand a ZERO?
-	bne.b		_L13_3s			# no
-	bsr.l		t_dz2			# yes
-	bra.b		_L13_6s
-_L13_3s:
-	cmpi.b		%d1,&INF		# is operand an INF?
-	bne.b		_L13_4s			# no
-	bsr.l		sopr_inf			# yes
-	bra.b		_L13_6s
-_L13_4s:
-	cmpi.b		%d1,&QNAN		# is operand a QNAN?
-	bne.b		_L13_5s			# no
-	bsr.l		src_qnan			# yes
-	bra.b		_L13_6s
-_L13_5s:
-	bsr.l		slognd			# operand is a DENORM
-_L13_6s:
-
-#
-#	Result is now in FP0
-#
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr # restore ctrl regs
-	fmovm.x		EXC_FP1(%a6),&0x40	# restore fp1
-	unlk		%a6
-	rts
-
-	global		_flognd_
-_flognd_:
-	link		%a6,&-LOCAL_SIZE
-
-	movm.l		&0x0303,EXC_DREGS(%a6)	# save d0-d1/a0-a1
-	fmovm.l		%fpcr,%fpsr,USER_FPCR(%a6) # save ctrl regs
-	fmovm.x		&0xc0,EXC_FP0(%a6)	# save fp0/fp1
-
-	fmov.l		&0x0,%fpcr		# zero FPCR
-
-#
-#	copy, convert, and tag input argument
-#
-	fmov.d		0x8(%a6),%fp0		# load dbl input
-	fmov.x		%fp0,FP_SRC(%a6)
-	lea		FP_SRC(%a6),%a0
-	bsr.l		tag			# fetch operand type
-	mov.b		%d0,STAG(%a6)
-	mov.b		%d0,%d1
-
-	andi.l		&0x00ff00ff,USER_FPSR(%a6)
-
-	clr.l		%d0
-	mov.b		FPCR_MODE(%a6),%d0	# pass rnd mode,prec
-
-	mov.b		%d1,STAG(%a6)
-	tst.b		%d1
-	bne.b		_L13_2d
-	bsr.l		slogn			# operand is a NORM
-	bra.b		_L13_6d
-_L13_2d:
-	cmpi.b		%d1,&ZERO		# is operand a ZERO?
-	bne.b		_L13_3d			# no
-	bsr.l		t_dz2			# yes
-	bra.b		_L13_6d
-_L13_3d:
-	cmpi.b		%d1,&INF		# is operand an INF?
-	bne.b		_L13_4d			# no
-	bsr.l		sopr_inf			# yes
-	bra.b		_L13_6d
-_L13_4d:
-	cmpi.b		%d1,&QNAN		# is operand a QNAN?
-	bne.b		_L13_5d			# no
-	bsr.l		src_qnan			# yes
-	bra.b		_L13_6d
-_L13_5d:
-	bsr.l		slognd			# operand is a DENORM
-_L13_6d:
-
-#
-#	Result is now in FP0
-#
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr # restore ctrl regs
-	fmovm.x		EXC_FP1(%a6),&0x40	# restore fp1
-	unlk		%a6
-	rts
-
-	global		_flognx_
-_flognx_:
-	link		%a6,&-LOCAL_SIZE
-
-	movm.l		&0x0303,EXC_DREGS(%a6)	# save d0-d1/a0-a1
-	fmovm.l		%fpcr,%fpsr,USER_FPCR(%a6) # save ctrl regs
-	fmovm.x		&0xc0,EXC_FP0(%a6)	# save fp0/fp1
-
-	fmov.l		&0x0,%fpcr		# zero FPCR
-
-#
-#	copy, convert, and tag input argument
-#
-	lea		FP_SRC(%a6),%a0
-	mov.l		0x8+0x0(%a6),0x0(%a0)	# load ext input
-	mov.l		0x8+0x4(%a6),0x4(%a0)
-	mov.l		0x8+0x8(%a6),0x8(%a0)
-	bsr.l		tag			# fetch operand type
-	mov.b		%d0,STAG(%a6)
-	mov.b		%d0,%d1
-
-	andi.l		&0x00ff00ff,USER_FPSR(%a6)
-
-	clr.l		%d0
-	mov.b		FPCR_MODE(%a6),%d0	# pass rnd mode,prec
-
-	tst.b		%d1
-	bne.b		_L13_2x
-	bsr.l		slogn			# operand is a NORM
-	bra.b		_L13_6x
-_L13_2x:
-	cmpi.b		%d1,&ZERO		# is operand a ZERO?
-	bne.b		_L13_3x			# no
-	bsr.l		t_dz2			# yes
-	bra.b		_L13_6x
-_L13_3x:
-	cmpi.b		%d1,&INF		# is operand an INF?
-	bne.b		_L13_4x			# no
-	bsr.l		sopr_inf			# yes
-	bra.b		_L13_6x
-_L13_4x:
-	cmpi.b		%d1,&QNAN		# is operand a QNAN?
-	bne.b		_L13_5x			# no
-	bsr.l		src_qnan			# yes
-	bra.b		_L13_6x
-_L13_5x:
-	bsr.l		slognd			# operand is a DENORM
-_L13_6x:
-
-#
-#	Result is now in FP0
-#
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr # restore ctrl regs
-	fmovm.x		EXC_FP1(%a6),&0x40	# restore fp1
-	unlk		%a6
-	rts
-
-
-#########################################################################
-# MONADIC TEMPLATE							#
-#########################################################################
-	global		_flog10s_
-_flog10s_:
-	link		%a6,&-LOCAL_SIZE
-
-	movm.l		&0x0303,EXC_DREGS(%a6)	# save d0-d1/a0-a1
-	fmovm.l		%fpcr,%fpsr,USER_FPCR(%a6) # save ctrl regs
-	fmovm.x		&0xc0,EXC_FP0(%a6)	# save fp0/fp1
-
-	fmov.l		&0x0,%fpcr		# zero FPCR
-
-#
-#	copy, convert, and tag input argument
-#
-	fmov.s		0x8(%a6),%fp0		# load sgl input
-	fmov.x		%fp0,FP_SRC(%a6)
-	lea		FP_SRC(%a6),%a0
-	bsr.l		tag			# fetch operand type
-	mov.b		%d0,STAG(%a6)
-	mov.b		%d0,%d1
-
-	andi.l		&0x00ff00ff,USER_FPSR(%a6)
-
-	clr.l		%d0
-	mov.b		FPCR_MODE(%a6),%d0	# pass rnd mode,prec
-
-	tst.b		%d1
-	bne.b		_L14_2s
-	bsr.l		slog10			# operand is a NORM
-	bra.b		_L14_6s
-_L14_2s:
-	cmpi.b		%d1,&ZERO		# is operand a ZERO?
-	bne.b		_L14_3s			# no
-	bsr.l		t_dz2			# yes
-	bra.b		_L14_6s
-_L14_3s:
-	cmpi.b		%d1,&INF		# is operand an INF?
-	bne.b		_L14_4s			# no
-	bsr.l		sopr_inf			# yes
-	bra.b		_L14_6s
-_L14_4s:
-	cmpi.b		%d1,&QNAN		# is operand a QNAN?
-	bne.b		_L14_5s			# no
-	bsr.l		src_qnan			# yes
-	bra.b		_L14_6s
-_L14_5s:
-	bsr.l		slog10d			# operand is a DENORM
-_L14_6s:
-
-#
-#	Result is now in FP0
-#
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr # restore ctrl regs
-	fmovm.x		EXC_FP1(%a6),&0x40	# restore fp1
-	unlk		%a6
-	rts
-
-	global		_flog10d_
-_flog10d_:
-	link		%a6,&-LOCAL_SIZE
-
-	movm.l		&0x0303,EXC_DREGS(%a6)	# save d0-d1/a0-a1
-	fmovm.l		%fpcr,%fpsr,USER_FPCR(%a6) # save ctrl regs
-	fmovm.x		&0xc0,EXC_FP0(%a6)	# save fp0/fp1
-
-	fmov.l		&0x0,%fpcr		# zero FPCR
-
-#
-#	copy, convert, and tag input argument
-#
-	fmov.d		0x8(%a6),%fp0		# load dbl input
-	fmov.x		%fp0,FP_SRC(%a6)
-	lea		FP_SRC(%a6),%a0
-	bsr.l		tag			# fetch operand type
-	mov.b		%d0,STAG(%a6)
-	mov.b		%d0,%d1
-
-	andi.l		&0x00ff00ff,USER_FPSR(%a6)
-
-	clr.l		%d0
-	mov.b		FPCR_MODE(%a6),%d0	# pass rnd mode,prec
-
-	mov.b		%d1,STAG(%a6)
-	tst.b		%d1
-	bne.b		_L14_2d
-	bsr.l		slog10			# operand is a NORM
-	bra.b		_L14_6d
-_L14_2d:
-	cmpi.b		%d1,&ZERO		# is operand a ZERO?
-	bne.b		_L14_3d			# no
-	bsr.l		t_dz2			# yes
-	bra.b		_L14_6d
-_L14_3d:
-	cmpi.b		%d1,&INF		# is operand an INF?
-	bne.b		_L14_4d			# no
-	bsr.l		sopr_inf			# yes
-	bra.b		_L14_6d
-_L14_4d:
-	cmpi.b		%d1,&QNAN		# is operand a QNAN?
-	bne.b		_L14_5d			# no
-	bsr.l		src_qnan			# yes
-	bra.b		_L14_6d
-_L14_5d:
-	bsr.l		slog10d			# operand is a DENORM
-_L14_6d:
-
-#
-#	Result is now in FP0
-#
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr # restore ctrl regs
-	fmovm.x		EXC_FP1(%a6),&0x40	# restore fp1
-	unlk		%a6
-	rts
-
-	global		_flog10x_
-_flog10x_:
-	link		%a6,&-LOCAL_SIZE
-
-	movm.l		&0x0303,EXC_DREGS(%a6)	# save d0-d1/a0-a1
-	fmovm.l		%fpcr,%fpsr,USER_FPCR(%a6) # save ctrl regs
-	fmovm.x		&0xc0,EXC_FP0(%a6)	# save fp0/fp1
-
-	fmov.l		&0x0,%fpcr		# zero FPCR
-
-#
-#	copy, convert, and tag input argument
-#
-	lea		FP_SRC(%a6),%a0
-	mov.l		0x8+0x0(%a6),0x0(%a0)	# load ext input
-	mov.l		0x8+0x4(%a6),0x4(%a0)
-	mov.l		0x8+0x8(%a6),0x8(%a0)
-	bsr.l		tag			# fetch operand type
-	mov.b		%d0,STAG(%a6)
-	mov.b		%d0,%d1
-
-	andi.l		&0x00ff00ff,USER_FPSR(%a6)
-
-	clr.l		%d0
-	mov.b		FPCR_MODE(%a6),%d0	# pass rnd mode,prec
-
-	tst.b		%d1
-	bne.b		_L14_2x
-	bsr.l		slog10			# operand is a NORM
-	bra.b		_L14_6x
-_L14_2x:
-	cmpi.b		%d1,&ZERO		# is operand a ZERO?
-	bne.b		_L14_3x			# no
-	bsr.l		t_dz2			# yes
-	bra.b		_L14_6x
-_L14_3x:
-	cmpi.b		%d1,&INF		# is operand an INF?
-	bne.b		_L14_4x			# no
-	bsr.l		sopr_inf			# yes
-	bra.b		_L14_6x
-_L14_4x:
-	cmpi.b		%d1,&QNAN		# is operand a QNAN?
-	bne.b		_L14_5x			# no
-	bsr.l		src_qnan			# yes
-	bra.b		_L14_6x
-_L14_5x:
-	bsr.l		slog10d			# operand is a DENORM
-_L14_6x:
-
-#
-#	Result is now in FP0
-#
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr # restore ctrl regs
-	fmovm.x		EXC_FP1(%a6),&0x40	# restore fp1
-	unlk		%a6
-	rts
-
-
-#########################################################################
-# MONADIC TEMPLATE							#
-#########################################################################
-	global		_flog2s_
-_flog2s_:
-	link		%a6,&-LOCAL_SIZE
-
-	movm.l		&0x0303,EXC_DREGS(%a6)	# save d0-d1/a0-a1
-	fmovm.l		%fpcr,%fpsr,USER_FPCR(%a6) # save ctrl regs
-	fmovm.x		&0xc0,EXC_FP0(%a6)	# save fp0/fp1
-
-	fmov.l		&0x0,%fpcr		# zero FPCR
-
-#
-#	copy, convert, and tag input argument
-#
-	fmov.s		0x8(%a6),%fp0		# load sgl input
-	fmov.x		%fp0,FP_SRC(%a6)
-	lea		FP_SRC(%a6),%a0
-	bsr.l		tag			# fetch operand type
-	mov.b		%d0,STAG(%a6)
-	mov.b		%d0,%d1
-
-	andi.l		&0x00ff00ff,USER_FPSR(%a6)
-
-	clr.l		%d0
-	mov.b		FPCR_MODE(%a6),%d0	# pass rnd mode,prec
-
-	tst.b		%d1
-	bne.b		_L15_2s
-	bsr.l		slog2			# operand is a NORM
-	bra.b		_L15_6s
-_L15_2s:
-	cmpi.b		%d1,&ZERO		# is operand a ZERO?
-	bne.b		_L15_3s			# no
-	bsr.l		t_dz2			# yes
-	bra.b		_L15_6s
-_L15_3s:
-	cmpi.b		%d1,&INF		# is operand an INF?
-	bne.b		_L15_4s			# no
-	bsr.l		sopr_inf			# yes
-	bra.b		_L15_6s
-_L15_4s:
-	cmpi.b		%d1,&QNAN		# is operand a QNAN?
-	bne.b		_L15_5s			# no
-	bsr.l		src_qnan			# yes
-	bra.b		_L15_6s
-_L15_5s:
-	bsr.l		slog2d			# operand is a DENORM
-_L15_6s:
-
-#
-#	Result is now in FP0
-#
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr # restore ctrl regs
-	fmovm.x		EXC_FP1(%a6),&0x40	# restore fp1
-	unlk		%a6
-	rts
-
-	global		_flog2d_
-_flog2d_:
-	link		%a6,&-LOCAL_SIZE
-
-	movm.l		&0x0303,EXC_DREGS(%a6)	# save d0-d1/a0-a1
-	fmovm.l		%fpcr,%fpsr,USER_FPCR(%a6) # save ctrl regs
-	fmovm.x		&0xc0,EXC_FP0(%a6)	# save fp0/fp1
-
-	fmov.l		&0x0,%fpcr		# zero FPCR
-
-#
-#	copy, convert, and tag input argument
-#
-	fmov.d		0x8(%a6),%fp0		# load dbl input
-	fmov.x		%fp0,FP_SRC(%a6)
-	lea		FP_SRC(%a6),%a0
-	bsr.l		tag			# fetch operand type
-	mov.b		%d0,STAG(%a6)
-	mov.b		%d0,%d1
-
-	andi.l		&0x00ff00ff,USER_FPSR(%a6)
-
-	clr.l		%d0
-	mov.b		FPCR_MODE(%a6),%d0	# pass rnd mode,prec
-
-	mov.b		%d1,STAG(%a6)
-	tst.b		%d1
-	bne.b		_L15_2d
-	bsr.l		slog2			# operand is a NORM
-	bra.b		_L15_6d
-_L15_2d:
-	cmpi.b		%d1,&ZERO		# is operand a ZERO?
-	bne.b		_L15_3d			# no
-	bsr.l		t_dz2			# yes
-	bra.b		_L15_6d
-_L15_3d:
-	cmpi.b		%d1,&INF		# is operand an INF?
-	bne.b		_L15_4d			# no
-	bsr.l		sopr_inf			# yes
-	bra.b		_L15_6d
-_L15_4d:
-	cmpi.b		%d1,&QNAN		# is operand a QNAN?
-	bne.b		_L15_5d			# no
-	bsr.l		src_qnan			# yes
-	bra.b		_L15_6d
-_L15_5d:
-	bsr.l		slog2d			# operand is a DENORM
-_L15_6d:
-
-#
-#	Result is now in FP0
-#
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr # restore ctrl regs
-	fmovm.x		EXC_FP1(%a6),&0x40	# restore fp1
-	unlk		%a6
-	rts
-
-	global		_flog2x_
-_flog2x_:
-	link		%a6,&-LOCAL_SIZE
-
-	movm.l		&0x0303,EXC_DREGS(%a6)	# save d0-d1/a0-a1
-	fmovm.l		%fpcr,%fpsr,USER_FPCR(%a6) # save ctrl regs
-	fmovm.x		&0xc0,EXC_FP0(%a6)	# save fp0/fp1
-
-	fmov.l		&0x0,%fpcr		# zero FPCR
-
-#
-#	copy, convert, and tag input argument
-#
-	lea		FP_SRC(%a6),%a0
-	mov.l		0x8+0x0(%a6),0x0(%a0)	# load ext input
-	mov.l		0x8+0x4(%a6),0x4(%a0)
-	mov.l		0x8+0x8(%a6),0x8(%a0)
-	bsr.l		tag			# fetch operand type
-	mov.b		%d0,STAG(%a6)
-	mov.b		%d0,%d1
-
-	andi.l		&0x00ff00ff,USER_FPSR(%a6)
-
-	clr.l		%d0
-	mov.b		FPCR_MODE(%a6),%d0	# pass rnd mode,prec
-
-	tst.b		%d1
-	bne.b		_L15_2x
-	bsr.l		slog2			# operand is a NORM
-	bra.b		_L15_6x
-_L15_2x:
-	cmpi.b		%d1,&ZERO		# is operand a ZERO?
-	bne.b		_L15_3x			# no
-	bsr.l		t_dz2			# yes
-	bra.b		_L15_6x
-_L15_3x:
-	cmpi.b		%d1,&INF		# is operand an INF?
-	bne.b		_L15_4x			# no
-	bsr.l		sopr_inf			# yes
-	bra.b		_L15_6x
-_L15_4x:
-	cmpi.b		%d1,&QNAN		# is operand a QNAN?
-	bne.b		_L15_5x			# no
-	bsr.l		src_qnan			# yes
-	bra.b		_L15_6x
-_L15_5x:
-	bsr.l		slog2d			# operand is a DENORM
-_L15_6x:
-
-#
-#	Result is now in FP0
-#
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr # restore ctrl regs
-	fmovm.x		EXC_FP1(%a6),&0x40	# restore fp1
-	unlk		%a6
-	rts
-
-
-#########################################################################
-# MONADIC TEMPLATE							#
-#########################################################################
-	global		_fcoshs_
-_fcoshs_:
-	link		%a6,&-LOCAL_SIZE
-
-	movm.l		&0x0303,EXC_DREGS(%a6)	# save d0-d1/a0-a1
-	fmovm.l		%fpcr,%fpsr,USER_FPCR(%a6) # save ctrl regs
-	fmovm.x		&0xc0,EXC_FP0(%a6)	# save fp0/fp1
-
-	fmov.l		&0x0,%fpcr		# zero FPCR
-
-#
-#	copy, convert, and tag input argument
-#
-	fmov.s		0x8(%a6),%fp0		# load sgl input
-	fmov.x		%fp0,FP_SRC(%a6)
-	lea		FP_SRC(%a6),%a0
-	bsr.l		tag			# fetch operand type
-	mov.b		%d0,STAG(%a6)
-	mov.b		%d0,%d1
-
-	andi.l		&0x00ff00ff,USER_FPSR(%a6)
-
-	clr.l		%d0
-	mov.b		FPCR_MODE(%a6),%d0	# pass rnd mode,prec
-
-	tst.b		%d1
-	bne.b		_L16_2s
-	bsr.l		scosh			# operand is a NORM
-	bra.b		_L16_6s
-_L16_2s:
-	cmpi.b		%d1,&ZERO		# is operand a ZERO?
-	bne.b		_L16_3s			# no
-	bsr.l		ld_pone			# yes
-	bra.b		_L16_6s
-_L16_3s:
-	cmpi.b		%d1,&INF		# is operand an INF?
-	bne.b		_L16_4s			# no
-	bsr.l		ld_pinf			# yes
-	bra.b		_L16_6s
-_L16_4s:
-	cmpi.b		%d1,&QNAN		# is operand a QNAN?
-	bne.b		_L16_5s			# no
-	bsr.l		src_qnan			# yes
-	bra.b		_L16_6s
-_L16_5s:
-	bsr.l		scoshd			# operand is a DENORM
-_L16_6s:
-
-#
-#	Result is now in FP0
-#
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr # restore ctrl regs
-	fmovm.x		EXC_FP1(%a6),&0x40	# restore fp1
-	unlk		%a6
-	rts
-
-	global		_fcoshd_
-_fcoshd_:
-	link		%a6,&-LOCAL_SIZE
-
-	movm.l		&0x0303,EXC_DREGS(%a6)	# save d0-d1/a0-a1
-	fmovm.l		%fpcr,%fpsr,USER_FPCR(%a6) # save ctrl regs
-	fmovm.x		&0xc0,EXC_FP0(%a6)	# save fp0/fp1
-
-	fmov.l		&0x0,%fpcr		# zero FPCR
-
-#
-#	copy, convert, and tag input argument
-#
-	fmov.d		0x8(%a6),%fp0		# load dbl input
-	fmov.x		%fp0,FP_SRC(%a6)
-	lea		FP_SRC(%a6),%a0
-	bsr.l		tag			# fetch operand type
-	mov.b		%d0,STAG(%a6)
-	mov.b		%d0,%d1
-
-	andi.l		&0x00ff00ff,USER_FPSR(%a6)
-
-	clr.l		%d0
-	mov.b		FPCR_MODE(%a6),%d0	# pass rnd mode,prec
-
-	mov.b		%d1,STAG(%a6)
-	tst.b		%d1
-	bne.b		_L16_2d
-	bsr.l		scosh			# operand is a NORM
-	bra.b		_L16_6d
-_L16_2d:
-	cmpi.b		%d1,&ZERO		# is operand a ZERO?
-	bne.b		_L16_3d			# no
-	bsr.l		ld_pone			# yes
-	bra.b		_L16_6d
-_L16_3d:
-	cmpi.b		%d1,&INF		# is operand an INF?
-	bne.b		_L16_4d			# no
-	bsr.l		ld_pinf			# yes
-	bra.b		_L16_6d
-_L16_4d:
-	cmpi.b		%d1,&QNAN		# is operand a QNAN?
-	bne.b		_L16_5d			# no
-	bsr.l		src_qnan			# yes
-	bra.b		_L16_6d
-_L16_5d:
-	bsr.l		scoshd			# operand is a DENORM
-_L16_6d:
-
-#
-#	Result is now in FP0
-#
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr # restore ctrl regs
-	fmovm.x		EXC_FP1(%a6),&0x40	# restore fp1
-	unlk		%a6
-	rts
-
-	global		_fcoshx_
-_fcoshx_:
-	link		%a6,&-LOCAL_SIZE
-
-	movm.l		&0x0303,EXC_DREGS(%a6)	# save d0-d1/a0-a1
-	fmovm.l		%fpcr,%fpsr,USER_FPCR(%a6) # save ctrl regs
-	fmovm.x		&0xc0,EXC_FP0(%a6)	# save fp0/fp1
-
-	fmov.l		&0x0,%fpcr		# zero FPCR
-
-#
-#	copy, convert, and tag input argument
-#
-	lea		FP_SRC(%a6),%a0
-	mov.l		0x8+0x0(%a6),0x0(%a0)	# load ext input
-	mov.l		0x8+0x4(%a6),0x4(%a0)
-	mov.l		0x8+0x8(%a6),0x8(%a0)
-	bsr.l		tag			# fetch operand type
-	mov.b		%d0,STAG(%a6)
-	mov.b		%d0,%d1
-
-	andi.l		&0x00ff00ff,USER_FPSR(%a6)
-
-	clr.l		%d0
-	mov.b		FPCR_MODE(%a6),%d0	# pass rnd mode,prec
-
-	tst.b		%d1
-	bne.b		_L16_2x
-	bsr.l		scosh			# operand is a NORM
-	bra.b		_L16_6x
-_L16_2x:
-	cmpi.b		%d1,&ZERO		# is operand a ZERO?
-	bne.b		_L16_3x			# no
-	bsr.l		ld_pone			# yes
-	bra.b		_L16_6x
-_L16_3x:
-	cmpi.b		%d1,&INF		# is operand an INF?
-	bne.b		_L16_4x			# no
-	bsr.l		ld_pinf			# yes
-	bra.b		_L16_6x
-_L16_4x:
-	cmpi.b		%d1,&QNAN		# is operand a QNAN?
-	bne.b		_L16_5x			# no
-	bsr.l		src_qnan			# yes
-	bra.b		_L16_6x
-_L16_5x:
-	bsr.l		scoshd			# operand is a DENORM
-_L16_6x:
-
-#
-#	Result is now in FP0
-#
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr # restore ctrl regs
-	fmovm.x		EXC_FP1(%a6),&0x40	# restore fp1
-	unlk		%a6
-	rts
-
-
-#########################################################################
-# MONADIC TEMPLATE							#
-#########################################################################
-	global		_facoss_
-_facoss_:
-	link		%a6,&-LOCAL_SIZE
-
-	movm.l		&0x0303,EXC_DREGS(%a6)	# save d0-d1/a0-a1
-	fmovm.l		%fpcr,%fpsr,USER_FPCR(%a6) # save ctrl regs
-	fmovm.x		&0xc0,EXC_FP0(%a6)	# save fp0/fp1
-
-	fmov.l		&0x0,%fpcr		# zero FPCR
-
-#
-#	copy, convert, and tag input argument
-#
-	fmov.s		0x8(%a6),%fp0		# load sgl input
-	fmov.x		%fp0,FP_SRC(%a6)
-	lea		FP_SRC(%a6),%a0
-	bsr.l		tag			# fetch operand type
-	mov.b		%d0,STAG(%a6)
-	mov.b		%d0,%d1
-
-	andi.l		&0x00ff00ff,USER_FPSR(%a6)
-
-	clr.l		%d0
-	mov.b		FPCR_MODE(%a6),%d0	# pass rnd mode,prec
-
-	tst.b		%d1
-	bne.b		_L17_2s
-	bsr.l		sacos			# operand is a NORM
-	bra.b		_L17_6s
-_L17_2s:
-	cmpi.b		%d1,&ZERO		# is operand a ZERO?
-	bne.b		_L17_3s			# no
-	bsr.l		ld_ppi2			# yes
-	bra.b		_L17_6s
-_L17_3s:
-	cmpi.b		%d1,&INF		# is operand an INF?
-	bne.b		_L17_4s			# no
-	bsr.l		t_operr			# yes
-	bra.b		_L17_6s
-_L17_4s:
-	cmpi.b		%d1,&QNAN		# is operand a QNAN?
-	bne.b		_L17_5s			# no
-	bsr.l		src_qnan			# yes
-	bra.b		_L17_6s
-_L17_5s:
-	bsr.l		sacosd			# operand is a DENORM
-_L17_6s:
-
-#
-#	Result is now in FP0
-#
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr # restore ctrl regs
-	fmovm.x		EXC_FP1(%a6),&0x40	# restore fp1
-	unlk		%a6
-	rts
-
-	global		_facosd_
-_facosd_:
-	link		%a6,&-LOCAL_SIZE
-
-	movm.l		&0x0303,EXC_DREGS(%a6)	# save d0-d1/a0-a1
-	fmovm.l		%fpcr,%fpsr,USER_FPCR(%a6) # save ctrl regs
-	fmovm.x		&0xc0,EXC_FP0(%a6)	# save fp0/fp1
-
-	fmov.l		&0x0,%fpcr		# zero FPCR
-
-#
-#	copy, convert, and tag input argument
-#
-	fmov.d		0x8(%a6),%fp0		# load dbl input
-	fmov.x		%fp0,FP_SRC(%a6)
-	lea		FP_SRC(%a6),%a0
-	bsr.l		tag			# fetch operand type
-	mov.b		%d0,STAG(%a6)
-	mov.b		%d0,%d1
-
-	andi.l		&0x00ff00ff,USER_FPSR(%a6)
-
-	clr.l		%d0
-	mov.b		FPCR_MODE(%a6),%d0	# pass rnd mode,prec
-
-	mov.b		%d1,STAG(%a6)
-	tst.b		%d1
-	bne.b		_L17_2d
-	bsr.l		sacos			# operand is a NORM
-	bra.b		_L17_6d
-_L17_2d:
-	cmpi.b		%d1,&ZERO		# is operand a ZERO?
-	bne.b		_L17_3d			# no
-	bsr.l		ld_ppi2			# yes
-	bra.b		_L17_6d
-_L17_3d:
-	cmpi.b		%d1,&INF		# is operand an INF?
-	bne.b		_L17_4d			# no
-	bsr.l		t_operr			# yes
-	bra.b		_L17_6d
-_L17_4d:
-	cmpi.b		%d1,&QNAN		# is operand a QNAN?
-	bne.b		_L17_5d			# no
-	bsr.l		src_qnan			# yes
-	bra.b		_L17_6d
-_L17_5d:
-	bsr.l		sacosd			# operand is a DENORM
-_L17_6d:
-
-#
-#	Result is now in FP0
-#
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr # restore ctrl regs
-	fmovm.x		EXC_FP1(%a6),&0x40	# restore fp1
-	unlk		%a6
-	rts
-
-	global		_facosx_
-_facosx_:
-	link		%a6,&-LOCAL_SIZE
-
-	movm.l		&0x0303,EXC_DREGS(%a6)	# save d0-d1/a0-a1
-	fmovm.l		%fpcr,%fpsr,USER_FPCR(%a6) # save ctrl regs
-	fmovm.x		&0xc0,EXC_FP0(%a6)	# save fp0/fp1
-
-	fmov.l		&0x0,%fpcr		# zero FPCR
-
-#
-#	copy, convert, and tag input argument
-#
-	lea		FP_SRC(%a6),%a0
-	mov.l		0x8+0x0(%a6),0x0(%a0)	# load ext input
-	mov.l		0x8+0x4(%a6),0x4(%a0)
-	mov.l		0x8+0x8(%a6),0x8(%a0)
-	bsr.l		tag			# fetch operand type
-	mov.b		%d0,STAG(%a6)
-	mov.b		%d0,%d1
-
-	andi.l		&0x00ff00ff,USER_FPSR(%a6)
-
-	clr.l		%d0
-	mov.b		FPCR_MODE(%a6),%d0	# pass rnd mode,prec
-
-	tst.b		%d1
-	bne.b		_L17_2x
-	bsr.l		sacos			# operand is a NORM
-	bra.b		_L17_6x
-_L17_2x:
-	cmpi.b		%d1,&ZERO		# is operand a ZERO?
-	bne.b		_L17_3x			# no
-	bsr.l		ld_ppi2			# yes
-	bra.b		_L17_6x
-_L17_3x:
-	cmpi.b		%d1,&INF		# is operand an INF?
-	bne.b		_L17_4x			# no
-	bsr.l		t_operr			# yes
-	bra.b		_L17_6x
-_L17_4x:
-	cmpi.b		%d1,&QNAN		# is operand a QNAN?
-	bne.b		_L17_5x			# no
-	bsr.l		src_qnan			# yes
-	bra.b		_L17_6x
-_L17_5x:
-	bsr.l		sacosd			# operand is a DENORM
-_L17_6x:
-
-#
-#	Result is now in FP0
-#
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr # restore ctrl regs
-	fmovm.x		EXC_FP1(%a6),&0x40	# restore fp1
-	unlk		%a6
-	rts
-
-
-#########################################################################
-# MONADIC TEMPLATE							#
-#########################################################################
-	global		_fgetexps_
-_fgetexps_:
-	link		%a6,&-LOCAL_SIZE
-
-	movm.l		&0x0303,EXC_DREGS(%a6)	# save d0-d1/a0-a1
-	fmovm.l		%fpcr,%fpsr,USER_FPCR(%a6) # save ctrl regs
-	fmovm.x		&0xc0,EXC_FP0(%a6)	# save fp0/fp1
-
-	fmov.l		&0x0,%fpcr		# zero FPCR
-
-#
-#	copy, convert, and tag input argument
-#
-	fmov.s		0x8(%a6),%fp0		# load sgl input
-	fmov.x		%fp0,FP_SRC(%a6)
-	lea		FP_SRC(%a6),%a0
-	bsr.l		tag			# fetch operand type
-	mov.b		%d0,STAG(%a6)
-	mov.b		%d0,%d1
-
-	andi.l		&0x00ff00ff,USER_FPSR(%a6)
-
-	clr.l		%d0
-	mov.b		FPCR_MODE(%a6),%d0	# pass rnd mode,prec
-
-	tst.b		%d1
-	bne.b		_L18_2s
-	bsr.l		sgetexp			# operand is a NORM
-	bra.b		_L18_6s
-_L18_2s:
-	cmpi.b		%d1,&ZERO		# is operand a ZERO?
-	bne.b		_L18_3s			# no
-	bsr.l		src_zero			# yes
-	bra.b		_L18_6s
-_L18_3s:
-	cmpi.b		%d1,&INF		# is operand an INF?
-	bne.b		_L18_4s			# no
-	bsr.l		t_operr			# yes
-	bra.b		_L18_6s
-_L18_4s:
-	cmpi.b		%d1,&QNAN		# is operand a QNAN?
-	bne.b		_L18_5s			# no
-	bsr.l		src_qnan			# yes
-	bra.b		_L18_6s
-_L18_5s:
-	bsr.l		sgetexpd			# operand is a DENORM
-_L18_6s:
-
-#
-#	Result is now in FP0
-#
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr # restore ctrl regs
-	fmovm.x		EXC_FP1(%a6),&0x40	# restore fp1
-	unlk		%a6
-	rts
-
-	global		_fgetexpd_
-_fgetexpd_:
-	link		%a6,&-LOCAL_SIZE
-
-	movm.l		&0x0303,EXC_DREGS(%a6)	# save d0-d1/a0-a1
-	fmovm.l		%fpcr,%fpsr,USER_FPCR(%a6) # save ctrl regs
-	fmovm.x		&0xc0,EXC_FP0(%a6)	# save fp0/fp1
-
-	fmov.l		&0x0,%fpcr		# zero FPCR
-
-#
-#	copy, convert, and tag input argument
-#
-	fmov.d		0x8(%a6),%fp0		# load dbl input
-	fmov.x		%fp0,FP_SRC(%a6)
-	lea		FP_SRC(%a6),%a0
-	bsr.l		tag			# fetch operand type
-	mov.b		%d0,STAG(%a6)
-	mov.b		%d0,%d1
-
-	andi.l		&0x00ff00ff,USER_FPSR(%a6)
-
-	clr.l		%d0
-	mov.b		FPCR_MODE(%a6),%d0	# pass rnd mode,prec
-
-	mov.b		%d1,STAG(%a6)
-	tst.b		%d1
-	bne.b		_L18_2d
-	bsr.l		sgetexp			# operand is a NORM
-	bra.b		_L18_6d
-_L18_2d:
-	cmpi.b		%d1,&ZERO		# is operand a ZERO?
-	bne.b		_L18_3d			# no
-	bsr.l		src_zero			# yes
-	bra.b		_L18_6d
-_L18_3d:
-	cmpi.b		%d1,&INF		# is operand an INF?
-	bne.b		_L18_4d			# no
-	bsr.l		t_operr			# yes
-	bra.b		_L18_6d
-_L18_4d:
-	cmpi.b		%d1,&QNAN		# is operand a QNAN?
-	bne.b		_L18_5d			# no
-	bsr.l		src_qnan			# yes
-	bra.b		_L18_6d
-_L18_5d:
-	bsr.l		sgetexpd			# operand is a DENORM
-_L18_6d:
-
-#
-#	Result is now in FP0
-#
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr # restore ctrl regs
-	fmovm.x		EXC_FP1(%a6),&0x40	# restore fp1
-	unlk		%a6
-	rts
-
-	global		_fgetexpx_
-_fgetexpx_:
-	link		%a6,&-LOCAL_SIZE
-
-	movm.l		&0x0303,EXC_DREGS(%a6)	# save d0-d1/a0-a1
-	fmovm.l		%fpcr,%fpsr,USER_FPCR(%a6) # save ctrl regs
-	fmovm.x		&0xc0,EXC_FP0(%a6)	# save fp0/fp1
-
-	fmov.l		&0x0,%fpcr		# zero FPCR
-
-#
-#	copy, convert, and tag input argument
-#
-	lea		FP_SRC(%a6),%a0
-	mov.l		0x8+0x0(%a6),0x0(%a0)	# load ext input
-	mov.l		0x8+0x4(%a6),0x4(%a0)
-	mov.l		0x8+0x8(%a6),0x8(%a0)
-	bsr.l		tag			# fetch operand type
-	mov.b		%d0,STAG(%a6)
-	mov.b		%d0,%d1
-
-	andi.l		&0x00ff00ff,USER_FPSR(%a6)
-
-	clr.l		%d0
-	mov.b		FPCR_MODE(%a6),%d0	# pass rnd mode,prec
-
-	tst.b		%d1
-	bne.b		_L18_2x
-	bsr.l		sgetexp			# operand is a NORM
-	bra.b		_L18_6x
-_L18_2x:
-	cmpi.b		%d1,&ZERO		# is operand a ZERO?
-	bne.b		_L18_3x			# no
-	bsr.l		src_zero			# yes
-	bra.b		_L18_6x
-_L18_3x:
-	cmpi.b		%d1,&INF		# is operand an INF?
-	bne.b		_L18_4x			# no
-	bsr.l		t_operr			# yes
-	bra.b		_L18_6x
-_L18_4x:
-	cmpi.b		%d1,&QNAN		# is operand a QNAN?
-	bne.b		_L18_5x			# no
-	bsr.l		src_qnan			# yes
-	bra.b		_L18_6x
-_L18_5x:
-	bsr.l		sgetexpd			# operand is a DENORM
-_L18_6x:
-
-#
-#	Result is now in FP0
-#
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr # restore ctrl regs
-	fmovm.x		EXC_FP1(%a6),&0x40	# restore fp1
-	unlk		%a6
-	rts
-
-
-#########################################################################
-# MONADIC TEMPLATE							#
-#########################################################################
-	global		_fgetmans_
-_fgetmans_:
-	link		%a6,&-LOCAL_SIZE
-
-	movm.l		&0x0303,EXC_DREGS(%a6)	# save d0-d1/a0-a1
-	fmovm.l		%fpcr,%fpsr,USER_FPCR(%a6) # save ctrl regs
-	fmovm.x		&0xc0,EXC_FP0(%a6)	# save fp0/fp1
-
-	fmov.l		&0x0,%fpcr		# zero FPCR
-
-#
-#	copy, convert, and tag input argument
-#
-	fmov.s		0x8(%a6),%fp0		# load sgl input
-	fmov.x		%fp0,FP_SRC(%a6)
-	lea		FP_SRC(%a6),%a0
-	bsr.l		tag			# fetch operand type
-	mov.b		%d0,STAG(%a6)
-	mov.b		%d0,%d1
-
-	andi.l		&0x00ff00ff,USER_FPSR(%a6)
-
-	clr.l		%d0
-	mov.b		FPCR_MODE(%a6),%d0	# pass rnd mode,prec
-
-	tst.b		%d1
-	bne.b		_L19_2s
-	bsr.l		sgetman			# operand is a NORM
-	bra.b		_L19_6s
-_L19_2s:
-	cmpi.b		%d1,&ZERO		# is operand a ZERO?
-	bne.b		_L19_3s			# no
-	bsr.l		src_zero			# yes
-	bra.b		_L19_6s
-_L19_3s:
-	cmpi.b		%d1,&INF		# is operand an INF?
-	bne.b		_L19_4s			# no
-	bsr.l		t_operr			# yes
-	bra.b		_L19_6s
-_L19_4s:
-	cmpi.b		%d1,&QNAN		# is operand a QNAN?
-	bne.b		_L19_5s			# no
-	bsr.l		src_qnan			# yes
-	bra.b		_L19_6s
-_L19_5s:
-	bsr.l		sgetmand			# operand is a DENORM
-_L19_6s:
-
-#
-#	Result is now in FP0
-#
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr # restore ctrl regs
-	fmovm.x		EXC_FP1(%a6),&0x40	# restore fp1
-	unlk		%a6
-	rts
-
-	global		_fgetmand_
-_fgetmand_:
-	link		%a6,&-LOCAL_SIZE
-
-	movm.l		&0x0303,EXC_DREGS(%a6)	# save d0-d1/a0-a1
-	fmovm.l		%fpcr,%fpsr,USER_FPCR(%a6) # save ctrl regs
-	fmovm.x		&0xc0,EXC_FP0(%a6)	# save fp0/fp1
-
-	fmov.l		&0x0,%fpcr		# zero FPCR
-
-#
-#	copy, convert, and tag input argument
-#
-	fmov.d		0x8(%a6),%fp0		# load dbl input
-	fmov.x		%fp0,FP_SRC(%a6)
-	lea		FP_SRC(%a6),%a0
-	bsr.l		tag			# fetch operand type
-	mov.b		%d0,STAG(%a6)
-	mov.b		%d0,%d1
-
-	andi.l		&0x00ff00ff,USER_FPSR(%a6)
-
-	clr.l		%d0
-	mov.b		FPCR_MODE(%a6),%d0	# pass rnd mode,prec
-
-	mov.b		%d1,STAG(%a6)
-	tst.b		%d1
-	bne.b		_L19_2d
-	bsr.l		sgetman			# operand is a NORM
-	bra.b		_L19_6d
-_L19_2d:
-	cmpi.b		%d1,&ZERO		# is operand a ZERO?
-	bne.b		_L19_3d			# no
-	bsr.l		src_zero			# yes
-	bra.b		_L19_6d
-_L19_3d:
-	cmpi.b		%d1,&INF		# is operand an INF?
-	bne.b		_L19_4d			# no
-	bsr.l		t_operr			# yes
-	bra.b		_L19_6d
-_L19_4d:
-	cmpi.b		%d1,&QNAN		# is operand a QNAN?
-	bne.b		_L19_5d			# no
-	bsr.l		src_qnan			# yes
-	bra.b		_L19_6d
-_L19_5d:
-	bsr.l		sgetmand			# operand is a DENORM
-_L19_6d:
-
-#
-#	Result is now in FP0
-#
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr # restore ctrl regs
-	fmovm.x		EXC_FP1(%a6),&0x40	# restore fp1
-	unlk		%a6
-	rts
-
-	global		_fgetmanx_
-_fgetmanx_:
-	link		%a6,&-LOCAL_SIZE
-
-	movm.l		&0x0303,EXC_DREGS(%a6)	# save d0-d1/a0-a1
-	fmovm.l		%fpcr,%fpsr,USER_FPCR(%a6) # save ctrl regs
-	fmovm.x		&0xc0,EXC_FP0(%a6)	# save fp0/fp1
-
-	fmov.l		&0x0,%fpcr		# zero FPCR
-
-#
-#	copy, convert, and tag input argument
-#
-	lea		FP_SRC(%a6),%a0
-	mov.l		0x8+0x0(%a6),0x0(%a0)	# load ext input
-	mov.l		0x8+0x4(%a6),0x4(%a0)
-	mov.l		0x8+0x8(%a6),0x8(%a0)
-	bsr.l		tag			# fetch operand type
-	mov.b		%d0,STAG(%a6)
-	mov.b		%d0,%d1
-
-	andi.l		&0x00ff00ff,USER_FPSR(%a6)
-
-	clr.l		%d0
-	mov.b		FPCR_MODE(%a6),%d0	# pass rnd mode,prec
-
-	tst.b		%d1
-	bne.b		_L19_2x
-	bsr.l		sgetman			# operand is a NORM
-	bra.b		_L19_6x
-_L19_2x:
-	cmpi.b		%d1,&ZERO		# is operand a ZERO?
-	bne.b		_L19_3x			# no
-	bsr.l		src_zero			# yes
-	bra.b		_L19_6x
-_L19_3x:
-	cmpi.b		%d1,&INF		# is operand an INF?
-	bne.b		_L19_4x			# no
-	bsr.l		t_operr			# yes
-	bra.b		_L19_6x
-_L19_4x:
-	cmpi.b		%d1,&QNAN		# is operand a QNAN?
-	bne.b		_L19_5x			# no
-	bsr.l		src_qnan			# yes
-	bra.b		_L19_6x
-_L19_5x:
-	bsr.l		sgetmand			# operand is a DENORM
-_L19_6x:
-
-#
-#	Result is now in FP0
-#
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr # restore ctrl regs
-	fmovm.x		EXC_FP1(%a6),&0x40	# restore fp1
-	unlk		%a6
-	rts
-
-
-#########################################################################
-# MONADIC TEMPLATE							#
-#########################################################################
-	global		_fsincoss_
-_fsincoss_:
-	link		%a6,&-LOCAL_SIZE
-
-	movm.l		&0x0303,EXC_DREGS(%a6)	# save d0-d1/a0-a1
-	fmovm.l		%fpcr,%fpsr,USER_FPCR(%a6) # save ctrl regs
-	fmovm.x		&0xc0,EXC_FP0(%a6)	# save fp0/fp1
-
-	fmov.l		&0x0,%fpcr		# zero FPCR
-
-#
-#	copy, convert, and tag input argument
-#
-	fmov.s		0x8(%a6),%fp0		# load sgl input
-	fmov.x		%fp0,FP_SRC(%a6)
-	lea		FP_SRC(%a6),%a0
-	bsr.l		tag			# fetch operand type
-	mov.b		%d0,STAG(%a6)
-	mov.b		%d0,%d1
-
-	andi.l		&0x00ff00ff,USER_FPSR(%a6)
-
-	clr.l		%d0
-	mov.b		FPCR_MODE(%a6),%d0	# pass rnd mode,prec
-
-	tst.b		%d1
-	bne.b		_L20_2s
-	bsr.l		ssincos			# operand is a NORM
-	bra.b		_L20_6s
-_L20_2s:
-	cmpi.b		%d1,&ZERO		# is operand a ZERO?
-	bne.b		_L20_3s			# no
-	bsr.l		ssincosz			# yes
-	bra.b		_L20_6s
-_L20_3s:
-	cmpi.b		%d1,&INF		# is operand an INF?
-	bne.b		_L20_4s			# no
-	bsr.l		ssincosi			# yes
-	bra.b		_L20_6s
-_L20_4s:
-	cmpi.b		%d1,&QNAN		# is operand a QNAN?
-	bne.b		_L20_5s			# no
-	bsr.l		ssincosqnan			# yes
-	bra.b		_L20_6s
-_L20_5s:
-	bsr.l		ssincosd			# operand is a DENORM
-_L20_6s:
-
-#
-#	Result is now in FP0
-#
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr # restore ctrl regs
-	fmovm.x		&0x03,-(%sp)		# store off fp0/fp1
-	fmovm.x		(%sp)+,&0x40		# fp0 now in fp1
-	fmovm.x		(%sp)+,&0x80		# fp1 now in fp0
-	unlk		%a6
-	rts
-
-	global		_fsincosd_
-_fsincosd_:
-	link		%a6,&-LOCAL_SIZE
-
-	movm.l		&0x0303,EXC_DREGS(%a6)	# save d0-d1/a0-a1
-	fmovm.l		%fpcr,%fpsr,USER_FPCR(%a6) # save ctrl regs
-	fmovm.x		&0xc0,EXC_FP0(%a6)	# save fp0/fp1
-
-	fmov.l		&0x0,%fpcr		# zero FPCR
-
-#
-#	copy, convert, and tag input argument
-#
-	fmov.d		0x8(%a6),%fp0		# load dbl input
-	fmov.x		%fp0,FP_SRC(%a6)
-	lea		FP_SRC(%a6),%a0
-	bsr.l		tag			# fetch operand type
-	mov.b		%d0,STAG(%a6)
-	mov.b		%d0,%d1
-
-	andi.l		&0x00ff00ff,USER_FPSR(%a6)
-
-	clr.l		%d0
-	mov.b		FPCR_MODE(%a6),%d0	# pass rnd mode,prec
-
-	mov.b		%d1,STAG(%a6)
-	tst.b		%d1
-	bne.b		_L20_2d
-	bsr.l		ssincos			# operand is a NORM
-	bra.b		_L20_6d
-_L20_2d:
-	cmpi.b		%d1,&ZERO		# is operand a ZERO?
-	bne.b		_L20_3d			# no
-	bsr.l		ssincosz			# yes
-	bra.b		_L20_6d
-_L20_3d:
-	cmpi.b		%d1,&INF		# is operand an INF?
-	bne.b		_L20_4d			# no
-	bsr.l		ssincosi			# yes
-	bra.b		_L20_6d
-_L20_4d:
-	cmpi.b		%d1,&QNAN		# is operand a QNAN?
-	bne.b		_L20_5d			# no
-	bsr.l		ssincosqnan			# yes
-	bra.b		_L20_6d
-_L20_5d:
-	bsr.l		ssincosd			# operand is a DENORM
-_L20_6d:
-
-#
-#	Result is now in FP0
-#
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr # restore ctrl regs
-	fmovm.x		&0x03,-(%sp)		# store off fp0/fp1
-	fmovm.x		(%sp)+,&0x40		# fp0 now in fp1
-	fmovm.x		(%sp)+,&0x80		# fp1 now in fp0
-	unlk		%a6
-	rts
-
-	global		_fsincosx_
-_fsincosx_:
-	link		%a6,&-LOCAL_SIZE
-
-	movm.l		&0x0303,EXC_DREGS(%a6)	# save d0-d1/a0-a1
-	fmovm.l		%fpcr,%fpsr,USER_FPCR(%a6) # save ctrl regs
-	fmovm.x		&0xc0,EXC_FP0(%a6)	# save fp0/fp1
-
-	fmov.l		&0x0,%fpcr		# zero FPCR
-
-#
-#	copy, convert, and tag input argument
-#
-	lea		FP_SRC(%a6),%a0
-	mov.l		0x8+0x0(%a6),0x0(%a0)	# load ext input
-	mov.l		0x8+0x4(%a6),0x4(%a0)
-	mov.l		0x8+0x8(%a6),0x8(%a0)
-	bsr.l		tag			# fetch operand type
-	mov.b		%d0,STAG(%a6)
-	mov.b		%d0,%d1
-
-	andi.l		&0x00ff00ff,USER_FPSR(%a6)
-
-	clr.l		%d0
-	mov.b		FPCR_MODE(%a6),%d0	# pass rnd mode,prec
-
-	tst.b		%d1
-	bne.b		_L20_2x
-	bsr.l		ssincos			# operand is a NORM
-	bra.b		_L20_6x
-_L20_2x:
-	cmpi.b		%d1,&ZERO		# is operand a ZERO?
-	bne.b		_L20_3x			# no
-	bsr.l		ssincosz			# yes
-	bra.b		_L20_6x
-_L20_3x:
-	cmpi.b		%d1,&INF		# is operand an INF?
-	bne.b		_L20_4x			# no
-	bsr.l		ssincosi			# yes
-	bra.b		_L20_6x
-_L20_4x:
-	cmpi.b		%d1,&QNAN		# is operand a QNAN?
-	bne.b		_L20_5x			# no
-	bsr.l		ssincosqnan			# yes
-	bra.b		_L20_6x
-_L20_5x:
-	bsr.l		ssincosd			# operand is a DENORM
-_L20_6x:
-
-#
-#	Result is now in FP0
-#
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr # restore ctrl regs
-	fmovm.x		&0x03,-(%sp)		# store off fp0/fp1
-	fmovm.x		(%sp)+,&0x40		# fp0 now in fp1
-	fmovm.x		(%sp)+,&0x80		# fp1 now in fp0
-	unlk		%a6
-	rts
-
-
-#########################################################################
-# DYADIC TEMPLATE							#
-#########################################################################
-	global		_frems_
-_frems_:
-	link		%a6,&-LOCAL_SIZE
-
-	movm.l		&0x0303,EXC_DREGS(%a6)	# save d0-d1/a0-a1
-	fmovm.l		%fpcr,%fpsr,USER_FPCR(%a6) # save ctrl regs
-	fmovm.x		&0xc0,EXC_FP0(%a6)	# save fp0/fp1
-
-	fmov.l		&0x0,%fpcr		# zero FPCR
-
-#
-#	copy, convert, and tag input argument
-#
-	fmov.s		0x8(%a6),%fp0		# load sgl dst
-	fmov.x		%fp0,FP_DST(%a6)
-	lea		FP_DST(%a6),%a0
-	bsr.l		tag			# fetch operand type
-	mov.b		%d0,DTAG(%a6)
-
-	fmov.s		0xc(%a6),%fp0		# load sgl src
-	fmov.x		%fp0,FP_SRC(%a6)
-	lea		FP_SRC(%a6),%a0
-	bsr.l		tag			# fetch operand type
-	mov.b		%d0,STAG(%a6)
-	mov.l		%d0,%d1
-
-	andi.l		&0x00ff00ff,USER_FPSR(%a6)
-
-	clr.l		%d0
-	mov.b		FPCR_MODE(%a6),%d0	# pass rnd mode,prec
-
-	lea		FP_SRC(%a6),%a0		# pass ptr to src
-	lea		FP_DST(%a6),%a1		# pass ptr to dst
-
-	tst.b		%d1
-	bne.b		_L21_2s
-	bsr.l		srem_snorm			# operand is a NORM
-	bra.b		_L21_6s
-_L21_2s:
-	cmpi.b		%d1,&ZERO		# is operand a ZERO?
-	bne.b		_L21_3s			# no
-	bsr.l		srem_szero			# yes
-	bra.b		_L21_6s
-_L21_3s:
-	cmpi.b		%d1,&INF		# is operand an INF?
-	bne.b		_L21_4s			# no
-	bsr.l		srem_sinf			# yes
-	bra.b		_L21_6s
-_L21_4s:
-	cmpi.b		%d1,&QNAN		# is operand a QNAN?
-	bne.b		_L21_5s			# no
-	bsr.l		sop_sqnan			# yes
-	bra.b		_L21_6s
-_L21_5s:
-	bsr.l		srem_sdnrm			# operand is a DENORM
-_L21_6s:
-
-#
-#	Result is now in FP0
-#
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr # restore ctrl regs
-	fmovm.x		EXC_FP1(%a6),&0x40	# restore fp1
-	unlk		%a6
-	rts
-
-	global		_fremd_
-_fremd_:
-	link		%a6,&-LOCAL_SIZE
-
-	movm.l		&0x0303,EXC_DREGS(%a6)	# save d0-d1/a0-a1
-	fmovm.l		%fpcr,%fpsr,USER_FPCR(%a6) # save ctrl regs
-	fmovm.x		&0xc0,EXC_FP0(%a6)	# save fp0/fp1
-
-	fmov.l		&0x0,%fpcr		# zero FPCR
-
-#
-#	copy, convert, and tag input argument
-#
-	fmov.d		0x8(%a6),%fp0		# load dbl dst
-	fmov.x		%fp0,FP_DST(%a6)
-	lea		FP_DST(%a6),%a0
-	bsr.l		tag			# fetch operand type
-	mov.b		%d0,DTAG(%a6)
-
-	fmov.d		0x10(%a6),%fp0		# load dbl src
-	fmov.x		%fp0,FP_SRC(%a6)
-	lea		FP_SRC(%a6),%a0
-	bsr.l		tag			# fetch operand type
-	mov.b		%d0,STAG(%a6)
-	mov.l		%d0,%d1
-
-	andi.l		&0x00ff00ff,USER_FPSR(%a6)
-
-	clr.l		%d0
-	mov.b		FPCR_MODE(%a6),%d0	# pass rnd mode,prec
-
-	lea		FP_SRC(%a6),%a0		# pass ptr to src
-	lea		FP_DST(%a6),%a1		# pass ptr to dst
-
-	tst.b		%d1
-	bne.b		_L21_2d
-	bsr.l		srem_snorm			# operand is a NORM
-	bra.b		_L21_6d
-_L21_2d:
-	cmpi.b		%d1,&ZERO		# is operand a ZERO?
-	bne.b		_L21_3d			# no
-	bsr.l		srem_szero			# yes
-	bra.b		_L21_6d
-_L21_3d:
-	cmpi.b		%d1,&INF		# is operand an INF?
-	bne.b		_L21_4d			# no
-	bsr.l		srem_sinf			# yes
-	bra.b		_L21_6d
-_L21_4d:
-	cmpi.b		%d1,&QNAN		# is operand a QNAN?
-	bne.b		_L21_5d			# no
-	bsr.l		sop_sqnan			# yes
-	bra.b		_L21_6d
-_L21_5d:
-	bsr.l		srem_sdnrm			# operand is a DENORM
-_L21_6d:
-
-#
-#	Result is now in FP0
-#
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr # restore ctrl regs
-	fmovm.x		EXC_FP1(%a6),&0x40	# restore fp1
-	unlk		%a6
-	rts
-
-	global		_fremx_
-_fremx_:
-	link		%a6,&-LOCAL_SIZE
-
-	movm.l		&0x0303,EXC_DREGS(%a6)	# save d0-d1/a0-a1
-	fmovm.l		%fpcr,%fpsr,USER_FPCR(%a6) # save ctrl regs
-	fmovm.x		&0xc0,EXC_FP0(%a6)	# save fp0/fp1
-
-	fmov.l		&0x0,%fpcr		# zero FPCR
-
-#
-#	copy, convert, and tag input argument
-#
-	lea		FP_DST(%a6),%a0
-	mov.l		0x8+0x0(%a6),0x0(%a0)	# load ext dst
-	mov.l		0x8+0x4(%a6),0x4(%a0)
-	mov.l		0x8+0x8(%a6),0x8(%a0)
-	bsr.l		tag			# fetch operand type
-	mov.b		%d0,DTAG(%a6)
-
-	lea		FP_SRC(%a6),%a0
-	mov.l		0x14+0x0(%a6),0x0(%a0)	# load ext src
-	mov.l		0x14+0x4(%a6),0x4(%a0)
-	mov.l		0x14+0x8(%a6),0x8(%a0)
-	bsr.l		tag			# fetch operand type
-	mov.b		%d0,STAG(%a6)
-	mov.l		%d0,%d1
-
-	andi.l		&0x00ff00ff,USER_FPSR(%a6)
-
-	clr.l		%d0
-	mov.b		FPCR_MODE(%a6),%d0	# pass rnd mode,prec
-
-	lea		FP_SRC(%a6),%a0		# pass ptr to src
-	lea		FP_DST(%a6),%a1		# pass ptr to dst
-
-	tst.b		%d1
-	bne.b		_L21_2x
-	bsr.l		srem_snorm			# operand is a NORM
-	bra.b		_L21_6x
-_L21_2x:
-	cmpi.b		%d1,&ZERO		# is operand a ZERO?
-	bne.b		_L21_3x			# no
-	bsr.l		srem_szero			# yes
-	bra.b		_L21_6x
-_L21_3x:
-	cmpi.b		%d1,&INF		# is operand an INF?
-	bne.b		_L21_4x			# no
-	bsr.l		srem_sinf			# yes
-	bra.b		_L21_6x
-_L21_4x:
-	cmpi.b		%d1,&QNAN		# is operand a QNAN?
-	bne.b		_L21_5x			# no
-	bsr.l		sop_sqnan			# yes
-	bra.b		_L21_6x
-_L21_5x:
-	bsr.l		srem_sdnrm			# operand is a DENORM
-_L21_6x:
-
-#
-#	Result is now in FP0
-#
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr # restore ctrl regs
-	fmovm.x		EXC_FP1(%a6),&0x40	# restore fp1
-	unlk		%a6
-	rts
-
-
-#########################################################################
-# DYADIC TEMPLATE							#
-#########################################################################
-	global		_fmods_
-_fmods_:
-	link		%a6,&-LOCAL_SIZE
-
-	movm.l		&0x0303,EXC_DREGS(%a6)	# save d0-d1/a0-a1
-	fmovm.l		%fpcr,%fpsr,USER_FPCR(%a6) # save ctrl regs
-	fmovm.x		&0xc0,EXC_FP0(%a6)	# save fp0/fp1
-
-	fmov.l		&0x0,%fpcr		# zero FPCR
-
-#
-#	copy, convert, and tag input argument
-#
-	fmov.s		0x8(%a6),%fp0		# load sgl dst
-	fmov.x		%fp0,FP_DST(%a6)
-	lea		FP_DST(%a6),%a0
-	bsr.l		tag			# fetch operand type
-	mov.b		%d0,DTAG(%a6)
-
-	fmov.s		0xc(%a6),%fp0		# load sgl src
-	fmov.x		%fp0,FP_SRC(%a6)
-	lea		FP_SRC(%a6),%a0
-	bsr.l		tag			# fetch operand type
-	mov.b		%d0,STAG(%a6)
-	mov.l		%d0,%d1
-
-	andi.l		&0x00ff00ff,USER_FPSR(%a6)
-
-	clr.l		%d0
-	mov.b		FPCR_MODE(%a6),%d0	# pass rnd mode,prec
-
-	lea		FP_SRC(%a6),%a0		# pass ptr to src
-	lea		FP_DST(%a6),%a1		# pass ptr to dst
-
-	tst.b		%d1
-	bne.b		_L22_2s
-	bsr.l		smod_snorm			# operand is a NORM
-	bra.b		_L22_6s
-_L22_2s:
-	cmpi.b		%d1,&ZERO		# is operand a ZERO?
-	bne.b		_L22_3s			# no
-	bsr.l		smod_szero			# yes
-	bra.b		_L22_6s
-_L22_3s:
-	cmpi.b		%d1,&INF		# is operand an INF?
-	bne.b		_L22_4s			# no
-	bsr.l		smod_sinf			# yes
-	bra.b		_L22_6s
-_L22_4s:
-	cmpi.b		%d1,&QNAN		# is operand a QNAN?
-	bne.b		_L22_5s			# no
-	bsr.l		sop_sqnan			# yes
-	bra.b		_L22_6s
-_L22_5s:
-	bsr.l		smod_sdnrm			# operand is a DENORM
-_L22_6s:
-
-#
-#	Result is now in FP0
-#
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr # restore ctrl regs
-	fmovm.x		EXC_FP1(%a6),&0x40	# restore fp1
-	unlk		%a6
-	rts
-
-	global		_fmodd_
-_fmodd_:
-	link		%a6,&-LOCAL_SIZE
-
-	movm.l		&0x0303,EXC_DREGS(%a6)	# save d0-d1/a0-a1
-	fmovm.l		%fpcr,%fpsr,USER_FPCR(%a6) # save ctrl regs
-	fmovm.x		&0xc0,EXC_FP0(%a6)	# save fp0/fp1
-
-	fmov.l		&0x0,%fpcr		# zero FPCR
-
-#
-#	copy, convert, and tag input argument
-#
-	fmov.d		0x8(%a6),%fp0		# load dbl dst
-	fmov.x		%fp0,FP_DST(%a6)
-	lea		FP_DST(%a6),%a0
-	bsr.l		tag			# fetch operand type
-	mov.b		%d0,DTAG(%a6)
-
-	fmov.d		0x10(%a6),%fp0		# load dbl src
-	fmov.x		%fp0,FP_SRC(%a6)
-	lea		FP_SRC(%a6),%a0
-	bsr.l		tag			# fetch operand type
-	mov.b		%d0,STAG(%a6)
-	mov.l		%d0,%d1
-
-	andi.l		&0x00ff00ff,USER_FPSR(%a6)
-
-	clr.l		%d0
-	mov.b		FPCR_MODE(%a6),%d0	# pass rnd mode,prec
-
-	lea		FP_SRC(%a6),%a0		# pass ptr to src
-	lea		FP_DST(%a6),%a1		# pass ptr to dst
-
-	tst.b		%d1
-	bne.b		_L22_2d
-	bsr.l		smod_snorm			# operand is a NORM
-	bra.b		_L22_6d
-_L22_2d:
-	cmpi.b		%d1,&ZERO		# is operand a ZERO?
-	bne.b		_L22_3d			# no
-	bsr.l		smod_szero			# yes
-	bra.b		_L22_6d
-_L22_3d:
-	cmpi.b		%d1,&INF		# is operand an INF?
-	bne.b		_L22_4d			# no
-	bsr.l		smod_sinf			# yes
-	bra.b		_L22_6d
-_L22_4d:
-	cmpi.b		%d1,&QNAN		# is operand a QNAN?
-	bne.b		_L22_5d			# no
-	bsr.l		sop_sqnan			# yes
-	bra.b		_L22_6d
-_L22_5d:
-	bsr.l		smod_sdnrm			# operand is a DENORM
-_L22_6d:
-
-#
-#	Result is now in FP0
-#
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr # restore ctrl regs
-	fmovm.x		EXC_FP1(%a6),&0x40	# restore fp1
-	unlk		%a6
-	rts
-
-	global		_fmodx_
-_fmodx_:
-	link		%a6,&-LOCAL_SIZE
-
-	movm.l		&0x0303,EXC_DREGS(%a6)	# save d0-d1/a0-a1
-	fmovm.l		%fpcr,%fpsr,USER_FPCR(%a6) # save ctrl regs
-	fmovm.x		&0xc0,EXC_FP0(%a6)	# save fp0/fp1
-
-	fmov.l		&0x0,%fpcr		# zero FPCR
-
-#
-#	copy, convert, and tag input argument
-#
-	lea		FP_DST(%a6),%a0
-	mov.l		0x8+0x0(%a6),0x0(%a0)	# load ext dst
-	mov.l		0x8+0x4(%a6),0x4(%a0)
-	mov.l		0x8+0x8(%a6),0x8(%a0)
-	bsr.l		tag			# fetch operand type
-	mov.b		%d0,DTAG(%a6)
-
-	lea		FP_SRC(%a6),%a0
-	mov.l		0x14+0x0(%a6),0x0(%a0)	# load ext src
-	mov.l		0x14+0x4(%a6),0x4(%a0)
-	mov.l		0x14+0x8(%a6),0x8(%a0)
-	bsr.l		tag			# fetch operand type
-	mov.b		%d0,STAG(%a6)
-	mov.l		%d0,%d1
-
-	andi.l		&0x00ff00ff,USER_FPSR(%a6)
-
-	clr.l		%d0
-	mov.b		FPCR_MODE(%a6),%d0	# pass rnd mode,prec
-
-	lea		FP_SRC(%a6),%a0		# pass ptr to src
-	lea		FP_DST(%a6),%a1		# pass ptr to dst
-
-	tst.b		%d1
-	bne.b		_L22_2x
-	bsr.l		smod_snorm			# operand is a NORM
-	bra.b		_L22_6x
-_L22_2x:
-	cmpi.b		%d1,&ZERO		# is operand a ZERO?
-	bne.b		_L22_3x			# no
-	bsr.l		smod_szero			# yes
-	bra.b		_L22_6x
-_L22_3x:
-	cmpi.b		%d1,&INF		# is operand an INF?
-	bne.b		_L22_4x			# no
-	bsr.l		smod_sinf			# yes
-	bra.b		_L22_6x
-_L22_4x:
-	cmpi.b		%d1,&QNAN		# is operand a QNAN?
-	bne.b		_L22_5x			# no
-	bsr.l		sop_sqnan			# yes
-	bra.b		_L22_6x
-_L22_5x:
-	bsr.l		smod_sdnrm			# operand is a DENORM
-_L22_6x:
-
-#
-#	Result is now in FP0
-#
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr # restore ctrl regs
-	fmovm.x		EXC_FP1(%a6),&0x40	# restore fp1
-	unlk		%a6
-	rts
-
-
-#########################################################################
-# DYADIC TEMPLATE							#
-#########################################################################
-	global		_fscales_
-_fscales_:
-	link		%a6,&-LOCAL_SIZE
-
-	movm.l		&0x0303,EXC_DREGS(%a6)	# save d0-d1/a0-a1
-	fmovm.l		%fpcr,%fpsr,USER_FPCR(%a6) # save ctrl regs
-	fmovm.x		&0xc0,EXC_FP0(%a6)	# save fp0/fp1
-
-	fmov.l		&0x0,%fpcr		# zero FPCR
-
-#
-#	copy, convert, and tag input argument
-#
-	fmov.s		0x8(%a6),%fp0		# load sgl dst
-	fmov.x		%fp0,FP_DST(%a6)
-	lea		FP_DST(%a6),%a0
-	bsr.l		tag			# fetch operand type
-	mov.b		%d0,DTAG(%a6)
-
-	fmov.s		0xc(%a6),%fp0		# load sgl src
-	fmov.x		%fp0,FP_SRC(%a6)
-	lea		FP_SRC(%a6),%a0
-	bsr.l		tag			# fetch operand type
-	mov.b		%d0,STAG(%a6)
-	mov.l		%d0,%d1
-
-	andi.l		&0x00ff00ff,USER_FPSR(%a6)
-
-	clr.l		%d0
-	mov.b		FPCR_MODE(%a6),%d0	# pass rnd mode,prec
-
-	lea		FP_SRC(%a6),%a0		# pass ptr to src
-	lea		FP_DST(%a6),%a1		# pass ptr to dst
-
-	tst.b		%d1
-	bne.b		_L23_2s
-	bsr.l		sscale_snorm			# operand is a NORM
-	bra.b		_L23_6s
-_L23_2s:
-	cmpi.b		%d1,&ZERO		# is operand a ZERO?
-	bne.b		_L23_3s			# no
-	bsr.l		sscale_szero			# yes
-	bra.b		_L23_6s
-_L23_3s:
-	cmpi.b		%d1,&INF		# is operand an INF?
-	bne.b		_L23_4s			# no
-	bsr.l		sscale_sinf			# yes
-	bra.b		_L23_6s
-_L23_4s:
-	cmpi.b		%d1,&QNAN		# is operand a QNAN?
-	bne.b		_L23_5s			# no
-	bsr.l		sop_sqnan			# yes
-	bra.b		_L23_6s
-_L23_5s:
-	bsr.l		sscale_sdnrm			# operand is a DENORM
-_L23_6s:
-
-#
-#	Result is now in FP0
-#
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr # restore ctrl regs
-	fmovm.x		EXC_FP1(%a6),&0x40	# restore fp1
-	unlk		%a6
-	rts
-
-	global		_fscaled_
-_fscaled_:
-	link		%a6,&-LOCAL_SIZE
-
-	movm.l		&0x0303,EXC_DREGS(%a6)	# save d0-d1/a0-a1
-	fmovm.l		%fpcr,%fpsr,USER_FPCR(%a6) # save ctrl regs
-	fmovm.x		&0xc0,EXC_FP0(%a6)	# save fp0/fp1
-
-	fmov.l		&0x0,%fpcr		# zero FPCR
-
-#
-#	copy, convert, and tag input argument
-#
-	fmov.d		0x8(%a6),%fp0		# load dbl dst
-	fmov.x		%fp0,FP_DST(%a6)
-	lea		FP_DST(%a6),%a0
-	bsr.l		tag			# fetch operand type
-	mov.b		%d0,DTAG(%a6)
-
-	fmov.d		0x10(%a6),%fp0		# load dbl src
-	fmov.x		%fp0,FP_SRC(%a6)
-	lea		FP_SRC(%a6),%a0
-	bsr.l		tag			# fetch operand type
-	mov.b		%d0,STAG(%a6)
-	mov.l		%d0,%d1
-
-	andi.l		&0x00ff00ff,USER_FPSR(%a6)
-
-	clr.l		%d0
-	mov.b		FPCR_MODE(%a6),%d0	# pass rnd mode,prec
-
-	lea		FP_SRC(%a6),%a0		# pass ptr to src
-	lea		FP_DST(%a6),%a1		# pass ptr to dst
-
-	tst.b		%d1
-	bne.b		_L23_2d
-	bsr.l		sscale_snorm			# operand is a NORM
-	bra.b		_L23_6d
-_L23_2d:
-	cmpi.b		%d1,&ZERO		# is operand a ZERO?
-	bne.b		_L23_3d			# no
-	bsr.l		sscale_szero			# yes
-	bra.b		_L23_6d
-_L23_3d:
-	cmpi.b		%d1,&INF		# is operand an INF?
-	bne.b		_L23_4d			# no
-	bsr.l		sscale_sinf			# yes
-	bra.b		_L23_6d
-_L23_4d:
-	cmpi.b		%d1,&QNAN		# is operand a QNAN?
-	bne.b		_L23_5d			# no
-	bsr.l		sop_sqnan			# yes
-	bra.b		_L23_6d
-_L23_5d:
-	bsr.l		sscale_sdnrm			# operand is a DENORM
-_L23_6d:
-
-#
-#	Result is now in FP0
-#
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr # restore ctrl regs
-	fmovm.x		EXC_FP1(%a6),&0x40	# restore fp1
-	unlk		%a6
-	rts
-
-	global		_fscalex_
-_fscalex_:
-	link		%a6,&-LOCAL_SIZE
-
-	movm.l		&0x0303,EXC_DREGS(%a6)	# save d0-d1/a0-a1
-	fmovm.l		%fpcr,%fpsr,USER_FPCR(%a6) # save ctrl regs
-	fmovm.x		&0xc0,EXC_FP0(%a6)	# save fp0/fp1
-
-	fmov.l		&0x0,%fpcr		# zero FPCR
-
-#
-#	copy, convert, and tag input argument
-#
-	lea		FP_DST(%a6),%a0
-	mov.l		0x8+0x0(%a6),0x0(%a0)	# load ext dst
-	mov.l		0x8+0x4(%a6),0x4(%a0)
-	mov.l		0x8+0x8(%a6),0x8(%a0)
-	bsr.l		tag			# fetch operand type
-	mov.b		%d0,DTAG(%a6)
-
-	lea		FP_SRC(%a6),%a0
-	mov.l		0x14+0x0(%a6),0x0(%a0)	# load ext src
-	mov.l		0x14+0x4(%a6),0x4(%a0)
-	mov.l		0x14+0x8(%a6),0x8(%a0)
-	bsr.l		tag			# fetch operand type
-	mov.b		%d0,STAG(%a6)
-	mov.l		%d0,%d1
-
-	andi.l		&0x00ff00ff,USER_FPSR(%a6)
-
-	clr.l		%d0
-	mov.b		FPCR_MODE(%a6),%d0	# pass rnd mode,prec
-
-	lea		FP_SRC(%a6),%a0		# pass ptr to src
-	lea		FP_DST(%a6),%a1		# pass ptr to dst
-
-	tst.b		%d1
-	bne.b		_L23_2x
-	bsr.l		sscale_snorm			# operand is a NORM
-	bra.b		_L23_6x
-_L23_2x:
-	cmpi.b		%d1,&ZERO		# is operand a ZERO?
-	bne.b		_L23_3x			# no
-	bsr.l		sscale_szero			# yes
-	bra.b		_L23_6x
-_L23_3x:
-	cmpi.b		%d1,&INF		# is operand an INF?
-	bne.b		_L23_4x			# no
-	bsr.l		sscale_sinf			# yes
-	bra.b		_L23_6x
-_L23_4x:
-	cmpi.b		%d1,&QNAN		# is operand a QNAN?
-	bne.b		_L23_5x			# no
-	bsr.l		sop_sqnan			# yes
-	bra.b		_L23_6x
-_L23_5x:
-	bsr.l		sscale_sdnrm			# operand is a DENORM
-_L23_6x:
-
-#
-#	Result is now in FP0
-#
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr # restore ctrl regs
-	fmovm.x		EXC_FP1(%a6),&0x40	# restore fp1
-	unlk		%a6
-	rts
-
-
-#########################################################################
-# ssin():     computes the sine of a normalized input			#
-# ssind():    computes the sine of a denormalized input			#
-# scos():     computes the cosine of a normalized input			#
-# scosd():    computes the cosine of a denormalized input		#
-# ssincos():  computes the sine and cosine of a normalized input	#
-# ssincosd(): computes the sine and cosine of a denormalized input	#
-#									#
-# INPUT *************************************************************** #
-#	a0 = pointer to extended precision input			#
-#	d0 = round precision,mode					#
-#									#
-# OUTPUT ************************************************************** #
-#	fp0 = sin(X) or cos(X)						#
-#									#
-#    For ssincos(X):							#
-#	fp0 = sin(X)							#
-#	fp1 = cos(X)							#
-#									#
-# ACCURACY and MONOTONICITY ******************************************* #
-#	The returned result is within 1 ulp in 64 significant bit, i.e.	#
-#	within 0.5001 ulp to 53 bits if the result is subsequently	#
-#	rounded to double precision. The result is provably monotonic	#
-#	in double precision.						#
-#									#
-# ALGORITHM ***********************************************************	#
-#									#
-#	SIN and COS:							#
-#	1. If SIN is invoked, set AdjN := 0; otherwise, set AdjN := 1.	#
-#									#
-#	2. If |X| >= 15Pi or |X| < 2**(-40), go to 7.			#
-#									#
-#	3. Decompose X as X = N(Pi/2) + r where |r| <= Pi/4. Let	#
-#		k = N mod 4, so in particular, k = 0,1,2,or 3.		#
-#		Overwrite k by k := k + AdjN.				#
-#									#
-#	4. If k is even, go to 6.					#
-#									#
-#	5. (k is odd) Set j := (k-1)/2, sgn := (-1)**j.			#
-#		Return sgn*cos(r) where cos(r) is approximated by an	#
-#		even polynomial in r, 1 + r*r*(B1+s*(B2+ ... + s*B8)),	#
-#		s = r*r.						#
-#		Exit.							#
-#									#
-#	6. (k is even) Set j := k/2, sgn := (-1)**j. Return sgn*sin(r)	#
-#		where sin(r) is approximated by an odd polynomial in r	#
-#		r + r*s*(A1+s*(A2+ ... + s*A7)),	s = r*r.	#
-#		Exit.							#
-#									#
-#	7. If |X| > 1, go to 9.						#
-#									#
-#	8. (|X|<2**(-40)) If SIN is invoked, return X;			#
-#		otherwise return 1.					#
-#									#
-#	9. Overwrite X by X := X rem 2Pi. Now that |X| <= Pi,		#
-#		go back to 3.						#
-#									#
-#	SINCOS:								#
-#	1. If |X| >= 15Pi or |X| < 2**(-40), go to 6.			#
-#									#
-#	2. Decompose X as X = N(Pi/2) + r where |r| <= Pi/4. Let	#
-#		k = N mod 4, so in particular, k = 0,1,2,or 3.		#
-#									#
-#	3. If k is even, go to 5.					#
-#									#
-#	4. (k is odd) Set j1 := (k-1)/2, j2 := j1 (EOR) (k mod 2), ie.	#
-#		j1 exclusive or with the l.s.b. of k.			#
-#		sgn1 := (-1)**j1, sgn2 := (-1)**j2.			#
-#		SIN(X) = sgn1 * cos(r) and COS(X) = sgn2*sin(r) where	#
-#		sin(r) and cos(r) are computed as odd and even		#
-#		polynomials in r, respectively. Exit			#
-#									#
-#	5. (k is even) Set j1 := k/2, sgn1 := (-1)**j1.			#
-#		SIN(X) = sgn1 * sin(r) and COS(X) = sgn1*cos(r) where	#
-#		sin(r) and cos(r) are computed as odd and even		#
-#		polynomials in r, respectively. Exit			#
-#									#
-#	6. If |X| > 1, go to 8.						#
-#									#
-#	7. (|X|<2**(-40)) SIN(X) = X and COS(X) = 1. Exit.		#
-#									#
-#	8. Overwrite X by X := X rem 2Pi. Now that |X| <= Pi,		#
-#		go back to 2.						#
-#									#
-#########################################################################
-
-SINA7:	long		0xBD6AAA77,0xCCC994F5
-SINA6:	long		0x3DE61209,0x7AAE8DA1
-SINA5:	long		0xBE5AE645,0x2A118AE4
-SINA4:	long		0x3EC71DE3,0xA5341531
-SINA3:	long		0xBF2A01A0,0x1A018B59,0x00000000,0x00000000
-SINA2:	long		0x3FF80000,0x88888888,0x888859AF,0x00000000
-SINA1:	long		0xBFFC0000,0xAAAAAAAA,0xAAAAAA99,0x00000000
-
-COSB8:	long		0x3D2AC4D0,0xD6011EE3
-COSB7:	long		0xBDA9396F,0x9F45AC19
-COSB6:	long		0x3E21EED9,0x0612C972
-COSB5:	long		0xBE927E4F,0xB79D9FCF
-COSB4:	long		0x3EFA01A0,0x1A01D423,0x00000000,0x00000000
-COSB3:	long		0xBFF50000,0xB60B60B6,0x0B61D438,0x00000000
-COSB2:	long		0x3FFA0000,0xAAAAAAAA,0xAAAAAB5E
-COSB1:	long		0xBF000000
-
-	set		INARG,FP_SCR0
-
-	set		X,FP_SCR0
-#	set		XDCARE,X+2
-	set		XFRAC,X+4
-
-	set		RPRIME,FP_SCR0
-	set		SPRIME,FP_SCR1
-
-	set		POSNEG1,L_SCR1
-	set		TWOTO63,L_SCR1
-
-	set		ENDFLAG,L_SCR2
-	set		INT,L_SCR2
-
-	set		ADJN,L_SCR3
-
-############################################
-	global		ssin
-ssin:
-	mov.l		&0,ADJN(%a6)		# yes; SET ADJN TO 0
-	bra.b		SINBGN
-
-############################################
-	global		scos
-scos:
-	mov.l		&1,ADJN(%a6)		# yes; SET ADJN TO 1
-
-############################################
-SINBGN:
-#--SAVE FPCR, FP1. CHECK IF |X| IS TOO SMALL OR LARGE
-
-	fmov.x		(%a0),%fp0		# LOAD INPUT
-	fmov.x		%fp0,X(%a6)		# save input at X
-
-# "COMPACTIFY" X
-	mov.l		(%a0),%d1		# put exp in hi word
-	mov.w		4(%a0),%d1		# fetch hi(man)
-	and.l		&0x7FFFFFFF,%d1		# strip sign
-
-	cmpi.l		%d1,&0x3FD78000		# is |X| >= 2**(-40)?
-	bge.b		SOK1			# no
-	bra.w		SINSM			# yes; input is very small
-
-SOK1:
-	cmp.l		%d1,&0x4004BC7E		# is |X| < 15 PI?
-	blt.b		SINMAIN			# no
-	bra.w		SREDUCEX		# yes; input is very large
-
-#--THIS IS THE USUAL CASE, |X| <= 15 PI.
-#--THE ARGUMENT REDUCTION IS DONE BY TABLE LOOK UP.
-SINMAIN:
-	fmov.x		%fp0,%fp1
-	fmul.d		TWOBYPI(%pc),%fp1	# X*2/PI
-
-	lea		PITBL+0x200(%pc),%a1	# TABLE OF N*PI/2, N = -32,...,32
-
-	fmov.l		%fp1,INT(%a6)		# CONVERT TO INTEGER
-
-	mov.l		INT(%a6),%d1		# make a copy of N
-	asl.l		&4,%d1			# N *= 16
-	add.l		%d1,%a1			# tbl_addr = a1 + (N*16)
-
-# A1 IS THE ADDRESS OF N*PIBY2
-# ...WHICH IS IN TWO PIECES Y1 & Y2
-	fsub.x		(%a1)+,%fp0		# X-Y1
-	fsub.s		(%a1),%fp0		# fp0 = R = (X-Y1)-Y2
-
-SINCONT:
-#--continuation from REDUCEX
-
-#--GET N+ADJN AND SEE IF SIN(R) OR COS(R) IS NEEDED
-	mov.l		INT(%a6),%d1
-	add.l		ADJN(%a6),%d1		# SEE IF D0 IS ODD OR EVEN
-	ror.l		&1,%d1			# D0 WAS ODD IFF D0 IS NEGATIVE
-	cmp.l		%d1,&0
-	blt.w		COSPOLY
-
-#--LET J BE THE LEAST SIG. BIT OF D0, LET SGN := (-1)**J.
-#--THEN WE RETURN	SGN*SIN(R). SGN*SIN(R) IS COMPUTED BY
-#--R' + R'*S*(A1 + S(A2 + S(A3 + S(A4 + ... + SA7)))), WHERE
-#--R' = SGN*R, S=R*R. THIS CAN BE REWRITTEN AS
-#--R' + R'*S*( [A1+T(A3+T(A5+TA7))] + [S(A2+T(A4+TA6))])
-#--WHERE T=S*S.
-#--NOTE THAT A3 THROUGH A7 ARE STORED IN DOUBLE PRECISION
-#--WHILE A1 AND A2 ARE IN DOUBLE-EXTENDED FORMAT.
-SINPOLY:
-	fmovm.x		&0x0c,-(%sp)		# save fp2/fp3
-
-	fmov.x		%fp0,X(%a6)		# X IS R
-	fmul.x		%fp0,%fp0		# FP0 IS S
-
-	fmov.d		SINA7(%pc),%fp3
-	fmov.d		SINA6(%pc),%fp2
-
-	fmov.x		%fp0,%fp1
-	fmul.x		%fp1,%fp1		# FP1 IS T
-
-	ror.l		&1,%d1
-	and.l		&0x80000000,%d1
-# ...LEAST SIG. BIT OF D0 IN SIGN POSITION
-	eor.l		%d1,X(%a6)		# X IS NOW R'= SGN*R
-
-	fmul.x		%fp1,%fp3		# TA7
-	fmul.x		%fp1,%fp2		# TA6
-
-	fadd.d		SINA5(%pc),%fp3		# A5+TA7
-	fadd.d		SINA4(%pc),%fp2		# A4+TA6
-
-	fmul.x		%fp1,%fp3		# T(A5+TA7)
-	fmul.x		%fp1,%fp2		# T(A4+TA6)
-
-	fadd.d		SINA3(%pc),%fp3		# A3+T(A5+TA7)
-	fadd.x		SINA2(%pc),%fp2		# A2+T(A4+TA6)
-
-	fmul.x		%fp3,%fp1		# T(A3+T(A5+TA7))
-
-	fmul.x		%fp0,%fp2		# S(A2+T(A4+TA6))
-	fadd.x		SINA1(%pc),%fp1		# A1+T(A3+T(A5+TA7))
-	fmul.x		X(%a6),%fp0		# R'*S
-
-	fadd.x		%fp2,%fp1		# [A1+T(A3+T(A5+TA7))]+[S(A2+T(A4+TA6))]
-
-	fmul.x		%fp1,%fp0		# SIN(R')-R'
-
-	fmovm.x		(%sp)+,&0x30		# restore fp2/fp3
-
-	fmov.l		%d0,%fpcr		# restore users round mode,prec
-	fadd.x		X(%a6),%fp0		# last inst - possible exception set
-	bra		t_inx2
-
-#--LET J BE THE LEAST SIG. BIT OF D0, LET SGN := (-1)**J.
-#--THEN WE RETURN	SGN*COS(R). SGN*COS(R) IS COMPUTED BY
-#--SGN + S'*(B1 + S(B2 + S(B3 + S(B4 + ... + SB8)))), WHERE
-#--S=R*R AND S'=SGN*S. THIS CAN BE REWRITTEN AS
-#--SGN + S'*([B1+T(B3+T(B5+TB7))] + [S(B2+T(B4+T(B6+TB8)))])
-#--WHERE T=S*S.
-#--NOTE THAT B4 THROUGH B8 ARE STORED IN DOUBLE PRECISION
-#--WHILE B2 AND B3 ARE IN DOUBLE-EXTENDED FORMAT, B1 IS -1/2
-#--AND IS THEREFORE STORED AS SINGLE PRECISION.
-COSPOLY:
-	fmovm.x		&0x0c,-(%sp)		# save fp2/fp3
-
-	fmul.x		%fp0,%fp0		# FP0 IS S
-
-	fmov.d		COSB8(%pc),%fp2
-	fmov.d		COSB7(%pc),%fp3
-
-	fmov.x		%fp0,%fp1
-	fmul.x		%fp1,%fp1		# FP1 IS T
-
-	fmov.x		%fp0,X(%a6)		# X IS S
-	ror.l		&1,%d1
-	and.l		&0x80000000,%d1
-# ...LEAST SIG. BIT OF D0 IN SIGN POSITION
-
-	fmul.x		%fp1,%fp2		# TB8
-
-	eor.l		%d1,X(%a6)		# X IS NOW S'= SGN*S
-	and.l		&0x80000000,%d1
-
-	fmul.x		%fp1,%fp3		# TB7
-
-	or.l		&0x3F800000,%d1		# D0 IS SGN IN SINGLE
-	mov.l		%d1,POSNEG1(%a6)
-
-	fadd.d		COSB6(%pc),%fp2		# B6+TB8
-	fadd.d		COSB5(%pc),%fp3		# B5+TB7
-
-	fmul.x		%fp1,%fp2		# T(B6+TB8)
-	fmul.x		%fp1,%fp3		# T(B5+TB7)
-
-	fadd.d		COSB4(%pc),%fp2		# B4+T(B6+TB8)
-	fadd.x		COSB3(%pc),%fp3		# B3+T(B5+TB7)
-
-	fmul.x		%fp1,%fp2		# T(B4+T(B6+TB8))
-	fmul.x		%fp3,%fp1		# T(B3+T(B5+TB7))
-
-	fadd.x		COSB2(%pc),%fp2		# B2+T(B4+T(B6+TB8))
-	fadd.s		COSB1(%pc),%fp1		# B1+T(B3+T(B5+TB7))
-
-	fmul.x		%fp2,%fp0		# S(B2+T(B4+T(B6+TB8)))
-
-	fadd.x		%fp1,%fp0
-
-	fmul.x		X(%a6),%fp0
-
-	fmovm.x		(%sp)+,&0x30		# restore fp2/fp3
-
-	fmov.l		%d0,%fpcr		# restore users round mode,prec
-	fadd.s		POSNEG1(%a6),%fp0	# last inst - possible exception set
-	bra		t_inx2
-
-##############################################
-
-# SINe: Big OR Small?
-#--IF |X| > 15PI, WE USE THE GENERAL ARGUMENT REDUCTION.
-#--IF |X| < 2**(-40), RETURN X OR 1.
-SINBORS:
-	cmp.l		%d1,&0x3FFF8000
-	bgt.l		SREDUCEX
-
-SINSM:
-	mov.l		ADJN(%a6),%d1
-	cmp.l		%d1,&0
-	bgt.b		COSTINY
-
-# here, the operation may underflow iff the precision is sgl or dbl.
-# extended denorms are handled through another entry point.
-SINTINY:
-#	mov.w		&0x0000,XDCARE(%a6)	# JUST IN CASE
-
-	fmov.l		%d0,%fpcr		# restore users round mode,prec
-	mov.b		&FMOV_OP,%d1		# last inst is MOVE
-	fmov.x		X(%a6),%fp0		# last inst - possible exception set
-	bra		t_catch
-
-COSTINY:
-	fmov.s		&0x3F800000,%fp0	# fp0 = 1.0
-	fmov.l		%d0,%fpcr		# restore users round mode,prec
-	fadd.s		&0x80800000,%fp0	# last inst - possible exception set
-	bra		t_pinx2
-
-################################################
-	global		ssind
-#--SIN(X) = X FOR DENORMALIZED X
-ssind:
-	bra		t_extdnrm
-
-############################################
-	global		scosd
-#--COS(X) = 1 FOR DENORMALIZED X
-scosd:
-	fmov.s		&0x3F800000,%fp0	# fp0 = 1.0
-	bra		t_pinx2
-
-##################################################
-
-	global		ssincos
-ssincos:
-#--SET ADJN TO 4
-	mov.l		&4,ADJN(%a6)
-
-	fmov.x		(%a0),%fp0		# LOAD INPUT
-	fmov.x		%fp0,X(%a6)
-
-	mov.l		(%a0),%d1
-	mov.w		4(%a0),%d1
-	and.l		&0x7FFFFFFF,%d1		# COMPACTIFY X
-
-	cmp.l		%d1,&0x3FD78000		# |X| >= 2**(-40)?
-	bge.b		SCOK1
-	bra.w		SCSM
-
-SCOK1:
-	cmp.l		%d1,&0x4004BC7E		# |X| < 15 PI?
-	blt.b		SCMAIN
-	bra.w		SREDUCEX
-
-
-#--THIS IS THE USUAL CASE, |X| <= 15 PI.
-#--THE ARGUMENT REDUCTION IS DONE BY TABLE LOOK UP.
-SCMAIN:
-	fmov.x		%fp0,%fp1
-
-	fmul.d		TWOBYPI(%pc),%fp1	# X*2/PI
-
-	lea		PITBL+0x200(%pc),%a1	# TABLE OF N*PI/2, N = -32,...,32
-
-	fmov.l		%fp1,INT(%a6)		# CONVERT TO INTEGER
-
-	mov.l		INT(%a6),%d1
-	asl.l		&4,%d1
-	add.l		%d1,%a1			# ADDRESS OF N*PIBY2, IN Y1, Y2
-
-	fsub.x		(%a1)+,%fp0		# X-Y1
-	fsub.s		(%a1),%fp0		# FP0 IS R = (X-Y1)-Y2
-
-SCCONT:
-#--continuation point from REDUCEX
-
-	mov.l		INT(%a6),%d1
-	ror.l		&1,%d1
-	cmp.l		%d1,&0			# D0 < 0 IFF N IS ODD
-	bge.w		NEVEN
-
-SNODD:
-#--REGISTERS SAVED SO FAR: D0, A0, FP2.
-	fmovm.x		&0x04,-(%sp)		# save fp2
-
-	fmov.x		%fp0,RPRIME(%a6)
-	fmul.x		%fp0,%fp0		# FP0 IS S = R*R
-	fmov.d		SINA7(%pc),%fp1		# A7
-	fmov.d		COSB8(%pc),%fp2		# B8
-	fmul.x		%fp0,%fp1		# SA7
-	fmul.x		%fp0,%fp2		# SB8
-
-	mov.l		%d2,-(%sp)
-	mov.l		%d1,%d2
-	ror.l		&1,%d2
-	and.l		&0x80000000,%d2
-	eor.l		%d1,%d2
-	and.l		&0x80000000,%d2
-
-	fadd.d		SINA6(%pc),%fp1		# A6+SA7
-	fadd.d		COSB7(%pc),%fp2		# B7+SB8
-
-	fmul.x		%fp0,%fp1		# S(A6+SA7)
-	eor.l		%d2,RPRIME(%a6)
-	mov.l		(%sp)+,%d2
-	fmul.x		%fp0,%fp2		# S(B7+SB8)
-	ror.l		&1,%d1
-	and.l		&0x80000000,%d1
-	mov.l		&0x3F800000,POSNEG1(%a6)
-	eor.l		%d1,POSNEG1(%a6)
-
-	fadd.d		SINA5(%pc),%fp1		# A5+S(A6+SA7)
-	fadd.d		COSB6(%pc),%fp2		# B6+S(B7+SB8)
-
-	fmul.x		%fp0,%fp1		# S(A5+S(A6+SA7))
-	fmul.x		%fp0,%fp2		# S(B6+S(B7+SB8))
-	fmov.x		%fp0,SPRIME(%a6)
-
-	fadd.d		SINA4(%pc),%fp1		# A4+S(A5+S(A6+SA7))
-	eor.l		%d1,SPRIME(%a6)
-	fadd.d		COSB5(%pc),%fp2		# B5+S(B6+S(B7+SB8))
-
-	fmul.x		%fp0,%fp1		# S(A4+...)
-	fmul.x		%fp0,%fp2		# S(B5+...)
-
-	fadd.d		SINA3(%pc),%fp1		# A3+S(A4+...)
-	fadd.d		COSB4(%pc),%fp2		# B4+S(B5+...)
-
-	fmul.x		%fp0,%fp1		# S(A3+...)
-	fmul.x		%fp0,%fp2		# S(B4+...)
-
-	fadd.x		SINA2(%pc),%fp1		# A2+S(A3+...)
-	fadd.x		COSB3(%pc),%fp2		# B3+S(B4+...)
-
-	fmul.x		%fp0,%fp1		# S(A2+...)
-	fmul.x		%fp0,%fp2		# S(B3+...)
-
-	fadd.x		SINA1(%pc),%fp1		# A1+S(A2+...)
-	fadd.x		COSB2(%pc),%fp2		# B2+S(B3+...)
-
-	fmul.x		%fp0,%fp1		# S(A1+...)
-	fmul.x		%fp2,%fp0		# S(B2+...)
-
-	fmul.x		RPRIME(%a6),%fp1	# R'S(A1+...)
-	fadd.s		COSB1(%pc),%fp0		# B1+S(B2...)
-	fmul.x		SPRIME(%a6),%fp0	# S'(B1+S(B2+...))
-
-	fmovm.x		(%sp)+,&0x20		# restore fp2
-
-	fmov.l		%d0,%fpcr
-	fadd.x		RPRIME(%a6),%fp1	# COS(X)
-	bsr		sto_cos			# store cosine result
-	fadd.s		POSNEG1(%a6),%fp0	# SIN(X)
-	bra		t_inx2
-
-NEVEN:
-#--REGISTERS SAVED SO FAR: FP2.
-	fmovm.x		&0x04,-(%sp)		# save fp2
-
-	fmov.x		%fp0,RPRIME(%a6)
-	fmul.x		%fp0,%fp0		# FP0 IS S = R*R
-
-	fmov.d		COSB8(%pc),%fp1		# B8
-	fmov.d		SINA7(%pc),%fp2		# A7
-
-	fmul.x		%fp0,%fp1		# SB8
-	fmov.x		%fp0,SPRIME(%a6)
-	fmul.x		%fp0,%fp2		# SA7
-
-	ror.l		&1,%d1
-	and.l		&0x80000000,%d1
-
-	fadd.d		COSB7(%pc),%fp1		# B7+SB8
-	fadd.d		SINA6(%pc),%fp2		# A6+SA7
-
-	eor.l		%d1,RPRIME(%a6)
-	eor.l		%d1,SPRIME(%a6)
-
-	fmul.x		%fp0,%fp1		# S(B7+SB8)
-
-	or.l		&0x3F800000,%d1
-	mov.l		%d1,POSNEG1(%a6)
-
-	fmul.x		%fp0,%fp2		# S(A6+SA7)
-
-	fadd.d		COSB6(%pc),%fp1		# B6+S(B7+SB8)
-	fadd.d		SINA5(%pc),%fp2		# A5+S(A6+SA7)
-
-	fmul.x		%fp0,%fp1		# S(B6+S(B7+SB8))
-	fmul.x		%fp0,%fp2		# S(A5+S(A6+SA7))
-
-	fadd.d		COSB5(%pc),%fp1		# B5+S(B6+S(B7+SB8))
-	fadd.d		SINA4(%pc),%fp2		# A4+S(A5+S(A6+SA7))
-
-	fmul.x		%fp0,%fp1		# S(B5+...)
-	fmul.x		%fp0,%fp2		# S(A4+...)
-
-	fadd.d		COSB4(%pc),%fp1		# B4+S(B5+...)
-	fadd.d		SINA3(%pc),%fp2		# A3+S(A4+...)
-
-	fmul.x		%fp0,%fp1		# S(B4+...)
-	fmul.x		%fp0,%fp2		# S(A3+...)
-
-	fadd.x		COSB3(%pc),%fp1		# B3+S(B4+...)
-	fadd.x		SINA2(%pc),%fp2		# A2+S(A3+...)
-
-	fmul.x		%fp0,%fp1		# S(B3+...)
-	fmul.x		%fp0,%fp2		# S(A2+...)
-
-	fadd.x		COSB2(%pc),%fp1		# B2+S(B3+...)
-	fadd.x		SINA1(%pc),%fp2		# A1+S(A2+...)
-
-	fmul.x		%fp0,%fp1		# S(B2+...)
-	fmul.x		%fp2,%fp0		# s(a1+...)
-
-
-	fadd.s		COSB1(%pc),%fp1		# B1+S(B2...)
-	fmul.x		RPRIME(%a6),%fp0	# R'S(A1+...)
-	fmul.x		SPRIME(%a6),%fp1	# S'(B1+S(B2+...))
-
-	fmovm.x		(%sp)+,&0x20		# restore fp2
-
-	fmov.l		%d0,%fpcr
-	fadd.s		POSNEG1(%a6),%fp1	# COS(X)
-	bsr		sto_cos			# store cosine result
-	fadd.x		RPRIME(%a6),%fp0	# SIN(X)
-	bra		t_inx2
-
-################################################
-
-SCBORS:
-	cmp.l		%d1,&0x3FFF8000
-	bgt.w		SREDUCEX
-
-################################################
-
-SCSM:
-#	mov.w		&0x0000,XDCARE(%a6)
-	fmov.s		&0x3F800000,%fp1
-
-	fmov.l		%d0,%fpcr
-	fsub.s		&0x00800000,%fp1
-	bsr		sto_cos			# store cosine result
-	fmov.l		%fpcr,%d0		# d0 must have fpcr,too
-	mov.b		&FMOV_OP,%d1		# last inst is MOVE
-	fmov.x		X(%a6),%fp0
-	bra		t_catch
-
-##############################################
-
-	global		ssincosd
-#--SIN AND COS OF X FOR DENORMALIZED X
-ssincosd:
-	mov.l		%d0,-(%sp)		# save d0
-	fmov.s		&0x3F800000,%fp1
-	bsr		sto_cos			# store cosine result
-	mov.l		(%sp)+,%d0		# restore d0
-	bra		t_extdnrm
-
-############################################
-
-#--WHEN REDUCEX IS USED, THE CODE WILL INEVITABLY BE SLOW.
-#--THIS REDUCTION METHOD, HOWEVER, IS MUCH FASTER THAN USING
-#--THE REMAINDER INSTRUCTION WHICH IS NOW IN SOFTWARE.
-SREDUCEX:
-	fmovm.x		&0x3c,-(%sp)		# save {fp2-fp5}
-	mov.l		%d2,-(%sp)		# save d2
-	fmov.s		&0x00000000,%fp1	# fp1 = 0
-
-#--If compact form of abs(arg) in d0=$7ffeffff, argument is so large that
-#--there is a danger of unwanted overflow in first LOOP iteration.  In this
-#--case, reduce argument by one remainder step to make subsequent reduction
-#--safe.
-	cmp.l		%d1,&0x7ffeffff		# is arg dangerously large?
-	bne.b		SLOOP			# no
-
-# yes; create 2**16383*PI/2
-	mov.w		&0x7ffe,FP_SCR0_EX(%a6)
-	mov.l		&0xc90fdaa2,FP_SCR0_HI(%a6)
-	clr.l		FP_SCR0_LO(%a6)
-
-# create low half of 2**16383*PI/2 at FP_SCR1
-	mov.w		&0x7fdc,FP_SCR1_EX(%a6)
-	mov.l		&0x85a308d3,FP_SCR1_HI(%a6)
-	clr.l		FP_SCR1_LO(%a6)
-
-	ftest.x		%fp0			# test sign of argument
-	fblt.w		sred_neg
-
-	or.b		&0x80,FP_SCR0_EX(%a6)	# positive arg
-	or.b		&0x80,FP_SCR1_EX(%a6)
-sred_neg:
-	fadd.x		FP_SCR0(%a6),%fp0	# high part of reduction is exact
-	fmov.x		%fp0,%fp1		# save high result in fp1
-	fadd.x		FP_SCR1(%a6),%fp0	# low part of reduction
-	fsub.x		%fp0,%fp1		# determine low component of result
-	fadd.x		FP_SCR1(%a6),%fp1	# fp0/fp1 are reduced argument.
-
-#--ON ENTRY, FP0 IS X, ON RETURN, FP0 IS X REM PI/2, |X| <= PI/4.
-#--integer quotient will be stored in N
-#--Intermeditate remainder is 66-bit long; (R,r) in (FP0,FP1)
-SLOOP:
-	fmov.x		%fp0,INARG(%a6)		# +-2**K * F, 1 <= F < 2
-	mov.w		INARG(%a6),%d1
-	mov.l		%d1,%a1			# save a copy of D0
-	and.l		&0x00007FFF,%d1
-	sub.l		&0x00003FFF,%d1		# d0 = K
-	cmp.l		%d1,&28
-	ble.b		SLASTLOOP
-SCONTLOOP:
-	sub.l		&27,%d1			# d0 = L := K-27
-	mov.b		&0,ENDFLAG(%a6)
-	bra.b		SWORK
-SLASTLOOP:
-	clr.l		%d1			# d0 = L := 0
-	mov.b		&1,ENDFLAG(%a6)
-
-SWORK:
-#--FIND THE REMAINDER OF (R,r) W.R.T.	2**L * (PI/2). L IS SO CHOSEN
-#--THAT	INT( X * (2/PI) / 2**(L) ) < 2**29.
-
-#--CREATE 2**(-L) * (2/PI), SIGN(INARG)*2**(63),
-#--2**L * (PIby2_1), 2**L * (PIby2_2)
-
-	mov.l		&0x00003FFE,%d2		# BIASED EXP OF 2/PI
-	sub.l		%d1,%d2			# BIASED EXP OF 2**(-L)*(2/PI)
-
-	mov.l		&0xA2F9836E,FP_SCR0_HI(%a6)
-	mov.l		&0x4E44152A,FP_SCR0_LO(%a6)
-	mov.w		%d2,FP_SCR0_EX(%a6)	# FP_SCR0 = 2**(-L)*(2/PI)
-
-	fmov.x		%fp0,%fp2
-	fmul.x		FP_SCR0(%a6),%fp2	# fp2 = X * 2**(-L)*(2/PI)
-
-#--WE MUST NOW FIND INT(FP2). SINCE WE NEED THIS VALUE IN
-#--FLOATING POINT FORMAT, THE TWO FMOVE'S	FMOVE.L FP <--> N
-#--WILL BE TOO INEFFICIENT. THE WAY AROUND IT IS THAT
-#--(SIGN(INARG)*2**63	+	FP2) - SIGN(INARG)*2**63 WILL GIVE
-#--US THE DESIRED VALUE IN FLOATING POINT.
-	mov.l		%a1,%d2
-	swap		%d2
-	and.l		&0x80000000,%d2
-	or.l		&0x5F000000,%d2		# d2 = SIGN(INARG)*2**63 IN SGL
-	mov.l		%d2,TWOTO63(%a6)
-	fadd.s		TWOTO63(%a6),%fp2	# THE FRACTIONAL PART OF FP1 IS ROUNDED
-	fsub.s		TWOTO63(%a6),%fp2	# fp2 = N
-#	fint.x		%fp2
-
-#--CREATING 2**(L)*Piby2_1 and 2**(L)*Piby2_2
-	mov.l		%d1,%d2			# d2 = L
-
-	add.l		&0x00003FFF,%d2		# BIASED EXP OF 2**L * (PI/2)
-	mov.w		%d2,FP_SCR0_EX(%a6)
-	mov.l		&0xC90FDAA2,FP_SCR0_HI(%a6)
-	clr.l		FP_SCR0_LO(%a6)		# FP_SCR0 = 2**(L) * Piby2_1
-
-	add.l		&0x00003FDD,%d1
-	mov.w		%d1,FP_SCR1_EX(%a6)
-	mov.l		&0x85A308D3,FP_SCR1_HI(%a6)
-	clr.l		FP_SCR1_LO(%a6)		# FP_SCR1 = 2**(L) * Piby2_2
-
-	mov.b		ENDFLAG(%a6),%d1
-
-#--We are now ready to perform (R+r) - N*P1 - N*P2, P1 = 2**(L) * Piby2_1 and
-#--P2 = 2**(L) * Piby2_2
-	fmov.x		%fp2,%fp4		# fp4 = N
-	fmul.x		FP_SCR0(%a6),%fp4	# fp4 = W = N*P1
-	fmov.x		%fp2,%fp5		# fp5 = N
-	fmul.x		FP_SCR1(%a6),%fp5	# fp5 = w = N*P2
-	fmov.x		%fp4,%fp3		# fp3 = W = N*P1
-
-#--we want P+p = W+w  but  |p| <= half ulp of P
-#--Then, we need to compute  A := R-P   and  a := r-p
-	fadd.x		%fp5,%fp3		# fp3 = P
-	fsub.x		%fp3,%fp4		# fp4 = W-P
-
-	fsub.x		%fp3,%fp0		# fp0 = A := R - P
-	fadd.x		%fp5,%fp4		# fp4 = p = (W-P)+w
-
-	fmov.x		%fp0,%fp3		# fp3 = A
-	fsub.x		%fp4,%fp1		# fp1 = a := r - p
-
-#--Now we need to normalize (A,a) to  "new (R,r)" where R+r = A+a but
-#--|r| <= half ulp of R.
-	fadd.x		%fp1,%fp0		# fp0 = R := A+a
-#--No need to calculate r if this is the last loop
-	cmp.b		%d1,&0
-	bgt.w		SRESTORE
-
-#--Need to calculate r
-	fsub.x		%fp0,%fp3		# fp3 = A-R
-	fadd.x		%fp3,%fp1		# fp1 = r := (A-R)+a
-	bra.w		SLOOP
-
-SRESTORE:
-	fmov.l		%fp2,INT(%a6)
-	mov.l		(%sp)+,%d2		# restore d2
-	fmovm.x		(%sp)+,&0x3c		# restore {fp2-fp5}
-
-	mov.l		ADJN(%a6),%d1
-	cmp.l		%d1,&4
-
-	blt.w		SINCONT
-	bra.w		SCCONT
-
-#########################################################################
-# stan():  computes the tangent of a normalized input			#
-# stand(): computes the tangent of a denormalized input			#
-#									#
-# INPUT *************************************************************** #
-#	a0 = pointer to extended precision input			#
-#	d0 = round precision,mode					#
-#									#
-# OUTPUT ************************************************************** #
-#	fp0 = tan(X)							#
-#									#
-# ACCURACY and MONOTONICITY ******************************************* #
-#	The returned result is within 3 ulp in 64 significant bit, i.e. #
-#	within 0.5001 ulp to 53 bits if the result is subsequently	#
-#	rounded to double precision. The result is provably monotonic	#
-#	in double precision.						#
-#									#
-# ALGORITHM *********************************************************** #
-#									#
-#	1. If |X| >= 15Pi or |X| < 2**(-40), go to 6.			#
-#									#
-#	2. Decompose X as X = N(Pi/2) + r where |r| <= Pi/4. Let	#
-#		k = N mod 2, so in particular, k = 0 or 1.		#
-#									#
-#	3. If k is odd, go to 5.					#
-#									#
-#	4. (k is even) Tan(X) = tan(r) and tan(r) is approximated by a	#
-#		rational function U/V where				#
-#		U = r + r*s*(P1 + s*(P2 + s*P3)), and			#
-#		V = 1 + s*(Q1 + s*(Q2 + s*(Q3 + s*Q4))),  s = r*r.	#
-#		Exit.							#
-#									#
-#	4. (k is odd) Tan(X) = -cot(r). Since tan(r) is approximated by #
-#		a rational function U/V where				#
-#		U = r + r*s*(P1 + s*(P2 + s*P3)), and			#
-#		V = 1 + s*(Q1 + s*(Q2 + s*(Q3 + s*Q4))), s = r*r,	#
-#		-Cot(r) = -V/U. Exit.					#
-#									#
-#	6. If |X| > 1, go to 8.						#
-#									#
-#	7. (|X|<2**(-40)) Tan(X) = X. Exit.				#
-#									#
-#	8. Overwrite X by X := X rem 2Pi. Now that |X| <= Pi, go back	#
-#		to 2.							#
-#									#
-#########################################################################
-
-TANQ4:
-	long		0x3EA0B759,0xF50F8688
-TANP3:
-	long		0xBEF2BAA5,0xA8924F04
-
-TANQ3:
-	long		0xBF346F59,0xB39BA65F,0x00000000,0x00000000
-
-TANP2:
-	long		0x3FF60000,0xE073D3FC,0x199C4A00,0x00000000
-
-TANQ2:
-	long		0x3FF90000,0xD23CD684,0x15D95FA1,0x00000000
-
-TANP1:
-	long		0xBFFC0000,0x8895A6C5,0xFB423BCA,0x00000000
-
-TANQ1:
-	long		0xBFFD0000,0xEEF57E0D,0xA84BC8CE,0x00000000
-
-INVTWOPI:
-	long		0x3FFC0000,0xA2F9836E,0x4E44152A,0x00000000
-
-TWOPI1:
-	long		0x40010000,0xC90FDAA2,0x00000000,0x00000000
-TWOPI2:
-	long		0x3FDF0000,0x85A308D4,0x00000000,0x00000000
-
-#--N*PI/2, -32 <= N <= 32, IN A LEADING TERM IN EXT. AND TRAILING
-#--TERM IN SGL. NOTE THAT PI IS 64-BIT LONG, THUS N*PI/2 IS AT
-#--MOST 69 BITS LONG.
-#	global		PITBL
-PITBL:
-	long		0xC0040000,0xC90FDAA2,0x2168C235,0x21800000
-	long		0xC0040000,0xC2C75BCD,0x105D7C23,0xA0D00000
-	long		0xC0040000,0xBC7EDCF7,0xFF523611,0xA1E80000
-	long		0xC0040000,0xB6365E22,0xEE46F000,0x21480000
-	long		0xC0040000,0xAFEDDF4D,0xDD3BA9EE,0xA1200000
-	long		0xC0040000,0xA9A56078,0xCC3063DD,0x21FC0000
-	long		0xC0040000,0xA35CE1A3,0xBB251DCB,0x21100000
-	long		0xC0040000,0x9D1462CE,0xAA19D7B9,0xA1580000
-	long		0xC0040000,0x96CBE3F9,0x990E91A8,0x21E00000
-	long		0xC0040000,0x90836524,0x88034B96,0x20B00000
-	long		0xC0040000,0x8A3AE64F,0x76F80584,0xA1880000
-	long		0xC0040000,0x83F2677A,0x65ECBF73,0x21C40000
-	long		0xC0030000,0xFB53D14A,0xA9C2F2C2,0x20000000
-	long		0xC0030000,0xEEC2D3A0,0x87AC669F,0x21380000
-	long		0xC0030000,0xE231D5F6,0x6595DA7B,0xA1300000
-	long		0xC0030000,0xD5A0D84C,0x437F4E58,0x9FC00000
-	long		0xC0030000,0xC90FDAA2,0x2168C235,0x21000000
-	long		0xC0030000,0xBC7EDCF7,0xFF523611,0xA1680000
-	long		0xC0030000,0xAFEDDF4D,0xDD3BA9EE,0xA0A00000
-	long		0xC0030000,0xA35CE1A3,0xBB251DCB,0x20900000
-	long		0xC0030000,0x96CBE3F9,0x990E91A8,0x21600000
-	long		0xC0030000,0x8A3AE64F,0x76F80584,0xA1080000
-	long		0xC0020000,0xFB53D14A,0xA9C2F2C2,0x1F800000
-	long		0xC0020000,0xE231D5F6,0x6595DA7B,0xA0B00000
-	long		0xC0020000,0xC90FDAA2,0x2168C235,0x20800000
-	long		0xC0020000,0xAFEDDF4D,0xDD3BA9EE,0xA0200000
-	long		0xC0020000,0x96CBE3F9,0x990E91A8,0x20E00000
-	long		0xC0010000,0xFB53D14A,0xA9C2F2C2,0x1F000000
-	long		0xC0010000,0xC90FDAA2,0x2168C235,0x20000000
-	long		0xC0010000,0x96CBE3F9,0x990E91A8,0x20600000
-	long		0xC0000000,0xC90FDAA2,0x2168C235,0x1F800000
-	long		0xBFFF0000,0xC90FDAA2,0x2168C235,0x1F000000
-	long		0x00000000,0x00000000,0x00000000,0x00000000
-	long		0x3FFF0000,0xC90FDAA2,0x2168C235,0x9F000000
-	long		0x40000000,0xC90FDAA2,0x2168C235,0x9F800000
-	long		0x40010000,0x96CBE3F9,0x990E91A8,0xA0600000
-	long		0x40010000,0xC90FDAA2,0x2168C235,0xA0000000
-	long		0x40010000,0xFB53D14A,0xA9C2F2C2,0x9F000000
-	long		0x40020000,0x96CBE3F9,0x990E91A8,0xA0E00000
-	long		0x40020000,0xAFEDDF4D,0xDD3BA9EE,0x20200000
-	long		0x40020000,0xC90FDAA2,0x2168C235,0xA0800000
-	long		0x40020000,0xE231D5F6,0x6595DA7B,0x20B00000
-	long		0x40020000,0xFB53D14A,0xA9C2F2C2,0x9F800000
-	long		0x40030000,0x8A3AE64F,0x76F80584,0x21080000
-	long		0x40030000,0x96CBE3F9,0x990E91A8,0xA1600000
-	long		0x40030000,0xA35CE1A3,0xBB251DCB,0xA0900000
-	long		0x40030000,0xAFEDDF4D,0xDD3BA9EE,0x20A00000
-	long		0x40030000,0xBC7EDCF7,0xFF523611,0x21680000
-	long		0x40030000,0xC90FDAA2,0x2168C235,0xA1000000
-	long		0x40030000,0xD5A0D84C,0x437F4E58,0x1FC00000
-	long		0x40030000,0xE231D5F6,0x6595DA7B,0x21300000
-	long		0x40030000,0xEEC2D3A0,0x87AC669F,0xA1380000
-	long		0x40030000,0xFB53D14A,0xA9C2F2C2,0xA0000000
-	long		0x40040000,0x83F2677A,0x65ECBF73,0xA1C40000
-	long		0x40040000,0x8A3AE64F,0x76F80584,0x21880000
-	long		0x40040000,0x90836524,0x88034B96,0xA0B00000
-	long		0x40040000,0x96CBE3F9,0x990E91A8,0xA1E00000
-	long		0x40040000,0x9D1462CE,0xAA19D7B9,0x21580000
-	long		0x40040000,0xA35CE1A3,0xBB251DCB,0xA1100000
-	long		0x40040000,0xA9A56078,0xCC3063DD,0xA1FC0000
-	long		0x40040000,0xAFEDDF4D,0xDD3BA9EE,0x21200000
-	long		0x40040000,0xB6365E22,0xEE46F000,0xA1480000
-	long		0x40040000,0xBC7EDCF7,0xFF523611,0x21E80000
-	long		0x40040000,0xC2C75BCD,0x105D7C23,0x20D00000
-	long		0x40040000,0xC90FDAA2,0x2168C235,0xA1800000
-
-	set		INARG,FP_SCR0
-
-	set		TWOTO63,L_SCR1
-	set		INT,L_SCR1
-	set		ENDFLAG,L_SCR2
-
-	global		stan
-stan:
-	fmov.x		(%a0),%fp0		# LOAD INPUT
-
-	mov.l		(%a0),%d1
-	mov.w		4(%a0),%d1
-	and.l		&0x7FFFFFFF,%d1
-
-	cmp.l		%d1,&0x3FD78000		# |X| >= 2**(-40)?
-	bge.b		TANOK1
-	bra.w		TANSM
-TANOK1:
-	cmp.l		%d1,&0x4004BC7E		# |X| < 15 PI?
-	blt.b		TANMAIN
-	bra.w		REDUCEX
-
-TANMAIN:
-#--THIS IS THE USUAL CASE, |X| <= 15 PI.
-#--THE ARGUMENT REDUCTION IS DONE BY TABLE LOOK UP.
-	fmov.x		%fp0,%fp1
-	fmul.d		TWOBYPI(%pc),%fp1	# X*2/PI
-
-	lea.l		PITBL+0x200(%pc),%a1	# TABLE OF N*PI/2, N = -32,...,32
-
-	fmov.l		%fp1,%d1		# CONVERT TO INTEGER
-
-	asl.l		&4,%d1
-	add.l		%d1,%a1			# ADDRESS N*PIBY2 IN Y1, Y2
-
-	fsub.x		(%a1)+,%fp0		# X-Y1
-
-	fsub.s		(%a1),%fp0		# FP0 IS R = (X-Y1)-Y2
-
-	ror.l		&5,%d1
-	and.l		&0x80000000,%d1		# D0 WAS ODD IFF D0 < 0
-
-TANCONT:
-	fmovm.x		&0x0c,-(%sp)		# save fp2,fp3
-
-	cmp.l		%d1,&0
-	blt.w		NODD
-
-	fmov.x		%fp0,%fp1
-	fmul.x		%fp1,%fp1		# S = R*R
-
-	fmov.d		TANQ4(%pc),%fp3
-	fmov.d		TANP3(%pc),%fp2
-
-	fmul.x		%fp1,%fp3		# SQ4
-	fmul.x		%fp1,%fp2		# SP3
-
-	fadd.d		TANQ3(%pc),%fp3		# Q3+SQ4
-	fadd.x		TANP2(%pc),%fp2		# P2+SP3
-
-	fmul.x		%fp1,%fp3		# S(Q3+SQ4)
-	fmul.x		%fp1,%fp2		# S(P2+SP3)
-
-	fadd.x		TANQ2(%pc),%fp3		# Q2+S(Q3+SQ4)
-	fadd.x		TANP1(%pc),%fp2		# P1+S(P2+SP3)
-
-	fmul.x		%fp1,%fp3		# S(Q2+S(Q3+SQ4))
-	fmul.x		%fp1,%fp2		# S(P1+S(P2+SP3))
-
-	fadd.x		TANQ1(%pc),%fp3		# Q1+S(Q2+S(Q3+SQ4))
-	fmul.x		%fp0,%fp2		# RS(P1+S(P2+SP3))
-
-	fmul.x		%fp3,%fp1		# S(Q1+S(Q2+S(Q3+SQ4)))
-
-	fadd.x		%fp2,%fp0		# R+RS(P1+S(P2+SP3))
-
-	fadd.s		&0x3F800000,%fp1	# 1+S(Q1+...)
-
-	fmovm.x		(%sp)+,&0x30		# restore fp2,fp3
-
-	fmov.l		%d0,%fpcr		# restore users round mode,prec
-	fdiv.x		%fp1,%fp0		# last inst - possible exception set
-	bra		t_inx2
-
-NODD:
-	fmov.x		%fp0,%fp1
-	fmul.x		%fp0,%fp0		# S = R*R
-
-	fmov.d		TANQ4(%pc),%fp3
-	fmov.d		TANP3(%pc),%fp2
-
-	fmul.x		%fp0,%fp3		# SQ4
-	fmul.x		%fp0,%fp2		# SP3
-
-	fadd.d		TANQ3(%pc),%fp3		# Q3+SQ4
-	fadd.x		TANP2(%pc),%fp2		# P2+SP3
-
-	fmul.x		%fp0,%fp3		# S(Q3+SQ4)
-	fmul.x		%fp0,%fp2		# S(P2+SP3)
-
-	fadd.x		TANQ2(%pc),%fp3		# Q2+S(Q3+SQ4)
-	fadd.x		TANP1(%pc),%fp2		# P1+S(P2+SP3)
-
-	fmul.x		%fp0,%fp3		# S(Q2+S(Q3+SQ4))
-	fmul.x		%fp0,%fp2		# S(P1+S(P2+SP3))
-
-	fadd.x		TANQ1(%pc),%fp3		# Q1+S(Q2+S(Q3+SQ4))
-	fmul.x		%fp1,%fp2		# RS(P1+S(P2+SP3))
-
-	fmul.x		%fp3,%fp0		# S(Q1+S(Q2+S(Q3+SQ4)))
-
-	fadd.x		%fp2,%fp1		# R+RS(P1+S(P2+SP3))
-	fadd.s		&0x3F800000,%fp0	# 1+S(Q1+...)
-
-	fmovm.x		(%sp)+,&0x30		# restore fp2,fp3
-
-	fmov.x		%fp1,-(%sp)
-	eor.l		&0x80000000,(%sp)
-
-	fmov.l		%d0,%fpcr		# restore users round mode,prec
-	fdiv.x		(%sp)+,%fp0		# last inst - possible exception set
-	bra		t_inx2
-
-TANBORS:
-#--IF |X| > 15PI, WE USE THE GENERAL ARGUMENT REDUCTION.
-#--IF |X| < 2**(-40), RETURN X OR 1.
-	cmp.l		%d1,&0x3FFF8000
-	bgt.b		REDUCEX
-
-TANSM:
-	fmov.x		%fp0,-(%sp)
-	fmov.l		%d0,%fpcr		# restore users round mode,prec
-	mov.b		&FMOV_OP,%d1		# last inst is MOVE
-	fmov.x		(%sp)+,%fp0		# last inst - posibble exception set
-	bra		t_catch
-
-	global		stand
-#--TAN(X) = X FOR DENORMALIZED X
-stand:
-	bra		t_extdnrm
-
-#--WHEN REDUCEX IS USED, THE CODE WILL INEVITABLY BE SLOW.
-#--THIS REDUCTION METHOD, HOWEVER, IS MUCH FASTER THAN USING
-#--THE REMAINDER INSTRUCTION WHICH IS NOW IN SOFTWARE.
-REDUCEX:
-	fmovm.x		&0x3c,-(%sp)		# save {fp2-fp5}
-	mov.l		%d2,-(%sp)		# save d2
-	fmov.s		&0x00000000,%fp1	# fp1 = 0
-
-#--If compact form of abs(arg) in d0=$7ffeffff, argument is so large that
-#--there is a danger of unwanted overflow in first LOOP iteration.  In this
-#--case, reduce argument by one remainder step to make subsequent reduction
-#--safe.
-	cmp.l		%d1,&0x7ffeffff		# is arg dangerously large?
-	bne.b		LOOP			# no
-
-# yes; create 2**16383*PI/2
-	mov.w		&0x7ffe,FP_SCR0_EX(%a6)
-	mov.l		&0xc90fdaa2,FP_SCR0_HI(%a6)
-	clr.l		FP_SCR0_LO(%a6)
-
-# create low half of 2**16383*PI/2 at FP_SCR1
-	mov.w		&0x7fdc,FP_SCR1_EX(%a6)
-	mov.l		&0x85a308d3,FP_SCR1_HI(%a6)
-	clr.l		FP_SCR1_LO(%a6)
-
-	ftest.x		%fp0			# test sign of argument
-	fblt.w		red_neg
-
-	or.b		&0x80,FP_SCR0_EX(%a6)	# positive arg
-	or.b		&0x80,FP_SCR1_EX(%a6)
-red_neg:
-	fadd.x		FP_SCR0(%a6),%fp0	# high part of reduction is exact
-	fmov.x		%fp0,%fp1		# save high result in fp1
-	fadd.x		FP_SCR1(%a6),%fp0	# low part of reduction
-	fsub.x		%fp0,%fp1		# determine low component of result
-	fadd.x		FP_SCR1(%a6),%fp1	# fp0/fp1 are reduced argument.
-
-#--ON ENTRY, FP0 IS X, ON RETURN, FP0 IS X REM PI/2, |X| <= PI/4.
-#--integer quotient will be stored in N
-#--Intermeditate remainder is 66-bit long; (R,r) in (FP0,FP1)
-LOOP:
-	fmov.x		%fp0,INARG(%a6)		# +-2**K * F, 1 <= F < 2
-	mov.w		INARG(%a6),%d1
-	mov.l		%d1,%a1			# save a copy of D0
-	and.l		&0x00007FFF,%d1
-	sub.l		&0x00003FFF,%d1		# d0 = K
-	cmp.l		%d1,&28
-	ble.b		LASTLOOP
-CONTLOOP:
-	sub.l		&27,%d1			# d0 = L := K-27
-	mov.b		&0,ENDFLAG(%a6)
-	bra.b		WORK
-LASTLOOP:
-	clr.l		%d1			# d0 = L := 0
-	mov.b		&1,ENDFLAG(%a6)
-
-WORK:
-#--FIND THE REMAINDER OF (R,r) W.R.T.	2**L * (PI/2). L IS SO CHOSEN
-#--THAT	INT( X * (2/PI) / 2**(L) ) < 2**29.
-
-#--CREATE 2**(-L) * (2/PI), SIGN(INARG)*2**(63),
-#--2**L * (PIby2_1), 2**L * (PIby2_2)
-
-	mov.l		&0x00003FFE,%d2		# BIASED EXP OF 2/PI
-	sub.l		%d1,%d2			# BIASED EXP OF 2**(-L)*(2/PI)
-
-	mov.l		&0xA2F9836E,FP_SCR0_HI(%a6)
-	mov.l		&0x4E44152A,FP_SCR0_LO(%a6)
-	mov.w		%d2,FP_SCR0_EX(%a6)	# FP_SCR0 = 2**(-L)*(2/PI)
-
-	fmov.x		%fp0,%fp2
-	fmul.x		FP_SCR0(%a6),%fp2	# fp2 = X * 2**(-L)*(2/PI)
-
-#--WE MUST NOW FIND INT(FP2). SINCE WE NEED THIS VALUE IN
-#--FLOATING POINT FORMAT, THE TWO FMOVE'S	FMOVE.L FP <--> N
-#--WILL BE TOO INEFFICIENT. THE WAY AROUND IT IS THAT
-#--(SIGN(INARG)*2**63	+	FP2) - SIGN(INARG)*2**63 WILL GIVE
-#--US THE DESIRED VALUE IN FLOATING POINT.
-	mov.l		%a1,%d2
-	swap		%d2
-	and.l		&0x80000000,%d2
-	or.l		&0x5F000000,%d2		# d2 = SIGN(INARG)*2**63 IN SGL
-	mov.l		%d2,TWOTO63(%a6)
-	fadd.s		TWOTO63(%a6),%fp2	# THE FRACTIONAL PART OF FP1 IS ROUNDED
-	fsub.s		TWOTO63(%a6),%fp2	# fp2 = N
-#	fintrz.x	%fp2,%fp2
-
-#--CREATING 2**(L)*Piby2_1 and 2**(L)*Piby2_2
-	mov.l		%d1,%d2			# d2 = L
-
-	add.l		&0x00003FFF,%d2		# BIASED EXP OF 2**L * (PI/2)
-	mov.w		%d2,FP_SCR0_EX(%a6)
-	mov.l		&0xC90FDAA2,FP_SCR0_HI(%a6)
-	clr.l		FP_SCR0_LO(%a6)		# FP_SCR0 = 2**(L) * Piby2_1
-
-	add.l		&0x00003FDD,%d1
-	mov.w		%d1,FP_SCR1_EX(%a6)
-	mov.l		&0x85A308D3,FP_SCR1_HI(%a6)
-	clr.l		FP_SCR1_LO(%a6)		# FP_SCR1 = 2**(L) * Piby2_2
-
-	mov.b		ENDFLAG(%a6),%d1
-
-#--We are now ready to perform (R+r) - N*P1 - N*P2, P1 = 2**(L) * Piby2_1 and
-#--P2 = 2**(L) * Piby2_2
-	fmov.x		%fp2,%fp4		# fp4 = N
-	fmul.x		FP_SCR0(%a6),%fp4	# fp4 = W = N*P1
-	fmov.x		%fp2,%fp5		# fp5 = N
-	fmul.x		FP_SCR1(%a6),%fp5	# fp5 = w = N*P2
-	fmov.x		%fp4,%fp3		# fp3 = W = N*P1
-
-#--we want P+p = W+w  but  |p| <= half ulp of P
-#--Then, we need to compute  A := R-P   and  a := r-p
-	fadd.x		%fp5,%fp3		# fp3 = P
-	fsub.x		%fp3,%fp4		# fp4 = W-P
-
-	fsub.x		%fp3,%fp0		# fp0 = A := R - P
-	fadd.x		%fp5,%fp4		# fp4 = p = (W-P)+w
-
-	fmov.x		%fp0,%fp3		# fp3 = A
-	fsub.x		%fp4,%fp1		# fp1 = a := r - p
-
-#--Now we need to normalize (A,a) to  "new (R,r)" where R+r = A+a but
-#--|r| <= half ulp of R.
-	fadd.x		%fp1,%fp0		# fp0 = R := A+a
-#--No need to calculate r if this is the last loop
-	cmp.b		%d1,&0
-	bgt.w		RESTORE
-
-#--Need to calculate r
-	fsub.x		%fp0,%fp3		# fp3 = A-R
-	fadd.x		%fp3,%fp1		# fp1 = r := (A-R)+a
-	bra.w		LOOP
-
-RESTORE:
-	fmov.l		%fp2,INT(%a6)
-	mov.l		(%sp)+,%d2		# restore d2
-	fmovm.x		(%sp)+,&0x3c		# restore {fp2-fp5}
-
-	mov.l		INT(%a6),%d1
-	ror.l		&1,%d1
-
-	bra.w		TANCONT
-
-#########################################################################
-# satan():  computes the arctangent of a normalized number		#
-# satand(): computes the arctangent of a denormalized number		#
-#									#
-# INPUT	*************************************************************** #
-#	a0 = pointer to extended precision input			#
-#	d0 = round precision,mode					#
-#									#
-# OUTPUT ************************************************************** #
-#	fp0 = arctan(X)							#
-#									#
-# ACCURACY and MONOTONICITY ******************************************* #
-#	The returned result is within 2 ulps in	64 significant bit,	#
-#	i.e. within 0.5001 ulp to 53 bits if the result is subsequently	#
-#	rounded to double precision. The result is provably monotonic	#
-#	in double precision.						#
-#									#
-# ALGORITHM *********************************************************** #
-#	Step 1. If |X| >= 16 or |X| < 1/16, go to Step 5.		#
-#									#
-#	Step 2. Let X = sgn * 2**k * 1.xxxxxxxx...x.			#
-#		Note that k = -4, -3,..., or 3.				#
-#		Define F = sgn * 2**k * 1.xxxx1, i.e. the first 5	#
-#		significant bits of X with a bit-1 attached at the 6-th	#
-#		bit position. Define u to be u = (X-F) / (1 + X*F).	#
-#									#
-#	Step 3. Approximate arctan(u) by a polynomial poly.		#
-#									#
-#	Step 4. Return arctan(F) + poly, arctan(F) is fetched from a	#
-#		table of values calculated beforehand. Exit.		#
-#									#
-#	Step 5. If |X| >= 16, go to Step 7.				#
-#									#
-#	Step 6. Approximate arctan(X) by an odd polynomial in X. Exit.	#
-#									#
-#	Step 7. Define X' = -1/X. Approximate arctan(X') by an odd	#
-#		polynomial in X'.					#
-#		Arctan(X) = sign(X)*Pi/2 + arctan(X'). Exit.		#
-#									#
-#########################################################################
-
-ATANA3:	long		0xBFF6687E,0x314987D8
-ATANA2:	long		0x4002AC69,0x34A26DB3
-ATANA1:	long		0xBFC2476F,0x4E1DA28E
-
-ATANB6:	long		0x3FB34444,0x7F876989
-ATANB5:	long		0xBFB744EE,0x7FAF45DB
-ATANB4:	long		0x3FBC71C6,0x46940220
-ATANB3:	long		0xBFC24924,0x921872F9
-ATANB2:	long		0x3FC99999,0x99998FA9
-ATANB1:	long		0xBFD55555,0x55555555
-
-ATANC5:	long		0xBFB70BF3,0x98539E6A
-ATANC4:	long		0x3FBC7187,0x962D1D7D
-ATANC3:	long		0xBFC24924,0x827107B8
-ATANC2:	long		0x3FC99999,0x9996263E
-ATANC1:	long		0xBFD55555,0x55555536
-
-PPIBY2:	long		0x3FFF0000,0xC90FDAA2,0x2168C235,0x00000000
-NPIBY2:	long		0xBFFF0000,0xC90FDAA2,0x2168C235,0x00000000
-
-PTINY:	long		0x00010000,0x80000000,0x00000000,0x00000000
-NTINY:	long		0x80010000,0x80000000,0x00000000,0x00000000
-
-ATANTBL:
-	long		0x3FFB0000,0x83D152C5,0x060B7A51,0x00000000
-	long		0x3FFB0000,0x8BC85445,0x65498B8B,0x00000000
-	long		0x3FFB0000,0x93BE4060,0x17626B0D,0x00000000
-	long		0x3FFB0000,0x9BB3078D,0x35AEC202,0x00000000
-	long		0x3FFB0000,0xA3A69A52,0x5DDCE7DE,0x00000000
-	long		0x3FFB0000,0xAB98E943,0x62765619,0x00000000
-	long		0x3FFB0000,0xB389E502,0xF9C59862,0x00000000
-	long		0x3FFB0000,0xBB797E43,0x6B09E6FB,0x00000000
-	long		0x3FFB0000,0xC367A5C7,0x39E5F446,0x00000000
-	long		0x3FFB0000,0xCB544C61,0xCFF7D5C6,0x00000000
-	long		0x3FFB0000,0xD33F62F8,0x2488533E,0x00000000
-	long		0x3FFB0000,0xDB28DA81,0x62404C77,0x00000000
-	long		0x3FFB0000,0xE310A407,0x8AD34F18,0x00000000
-	long		0x3FFB0000,0xEAF6B0A8,0x188EE1EB,0x00000000
-	long		0x3FFB0000,0xF2DAF194,0x9DBE79D5,0x00000000
-	long		0x3FFB0000,0xFABD5813,0x61D47E3E,0x00000000
-	long		0x3FFC0000,0x8346AC21,0x0959ECC4,0x00000000
-	long		0x3FFC0000,0x8B232A08,0x304282D8,0x00000000
-	long		0x3FFC0000,0x92FB70B8,0xD29AE2F9,0x00000000
-	long		0x3FFC0000,0x9ACF476F,0x5CCD1CB4,0x00000000
-	long		0x3FFC0000,0xA29E7630,0x4954F23F,0x00000000
-	long		0x3FFC0000,0xAA68C5D0,0x8AB85230,0x00000000
-	long		0x3FFC0000,0xB22DFFFD,0x9D539F83,0x00000000
-	long		0x3FFC0000,0xB9EDEF45,0x3E900EA5,0x00000000
-	long		0x3FFC0000,0xC1A85F1C,0xC75E3EA5,0x00000000
-	long		0x3FFC0000,0xC95D1BE8,0x28138DE6,0x00000000
-	long		0x3FFC0000,0xD10BF300,0x840D2DE4,0x00000000
-	long		0x3FFC0000,0xD8B4B2BA,0x6BC05E7A,0x00000000
-	long		0x3FFC0000,0xE0572A6B,0xB42335F6,0x00000000
-	long		0x3FFC0000,0xE7F32A70,0xEA9CAA8F,0x00000000
-	long		0x3FFC0000,0xEF888432,0x64ECEFAA,0x00000000
-	long		0x3FFC0000,0xF7170A28,0xECC06666,0x00000000
-	long		0x3FFD0000,0x812FD288,0x332DAD32,0x00000000
-	long		0x3FFD0000,0x88A8D1B1,0x218E4D64,0x00000000
-	long		0x3FFD0000,0x9012AB3F,0x23E4AEE8,0x00000000
-	long		0x3FFD0000,0x976CC3D4,0x11E7F1B9,0x00000000
-	long		0x3FFD0000,0x9EB68949,0x3889A227,0x00000000
-	long		0x3FFD0000,0xA5EF72C3,0x4487361B,0x00000000
-	long		0x3FFD0000,0xAD1700BA,0xF07A7227,0x00000000
-	long		0x3FFD0000,0xB42CBCFA,0xFD37EFB7,0x00000000
-	long		0x3FFD0000,0xBB303A94,0x0BA80F89,0x00000000
-	long		0x3FFD0000,0xC22115C6,0xFCAEBBAF,0x00000000
-	long		0x3FFD0000,0xC8FEF3E6,0x86331221,0x00000000
-	long		0x3FFD0000,0xCFC98330,0xB4000C70,0x00000000
-	long		0x3FFD0000,0xD6807AA1,0x102C5BF9,0x00000000
-	long		0x3FFD0000,0xDD2399BC,0x31252AA3,0x00000000
-	long		0x3FFD0000,0xE3B2A855,0x6B8FC517,0x00000000
-	long		0x3FFD0000,0xEA2D764F,0x64315989,0x00000000
-	long		0x3FFD0000,0xF3BF5BF8,0xBAD1A21D,0x00000000
-	long		0x3FFE0000,0x801CE39E,0x0D205C9A,0x00000000
-	long		0x3FFE0000,0x8630A2DA,0xDA1ED066,0x00000000
-	long		0x3FFE0000,0x8C1AD445,0xF3E09B8C,0x00000000
-	long		0x3FFE0000,0x91DB8F16,0x64F350E2,0x00000000
-	long		0x3FFE0000,0x97731420,0x365E538C,0x00000000
-	long		0x3FFE0000,0x9CE1C8E6,0xA0B8CDBA,0x00000000
-	long		0x3FFE0000,0xA22832DB,0xCADAAE09,0x00000000
-	long		0x3FFE0000,0xA746F2DD,0xB7602294,0x00000000
-	long		0x3FFE0000,0xAC3EC0FB,0x997DD6A2,0x00000000
-	long		0x3FFE0000,0xB110688A,0xEBDC6F6A,0x00000000
-	long		0x3FFE0000,0xB5BCC490,0x59ECC4B0,0x00000000
-	long		0x3FFE0000,0xBA44BC7D,0xD470782F,0x00000000
-	long		0x3FFE0000,0xBEA94144,0xFD049AAC,0x00000000
-	long		0x3FFE0000,0xC2EB4ABB,0x661628B6,0x00000000
-	long		0x3FFE0000,0xC70BD54C,0xE602EE14,0x00000000
-	long		0x3FFE0000,0xCD000549,0xADEC7159,0x00000000
-	long		0x3FFE0000,0xD48457D2,0xD8EA4EA3,0x00000000
-	long		0x3FFE0000,0xDB948DA7,0x12DECE3B,0x00000000
-	long		0x3FFE0000,0xE23855F9,0x69E8096A,0x00000000
-	long		0x3FFE0000,0xE8771129,0xC4353259,0x00000000
-	long		0x3FFE0000,0xEE57C16E,0x0D379C0D,0x00000000
-	long		0x3FFE0000,0xF3E10211,0xA87C3779,0x00000000
-	long		0x3FFE0000,0xF919039D,0x758B8D41,0x00000000
-	long		0x3FFE0000,0xFE058B8F,0x64935FB3,0x00000000
-	long		0x3FFF0000,0x8155FB49,0x7B685D04,0x00000000
-	long		0x3FFF0000,0x83889E35,0x49D108E1,0x00000000
-	long		0x3FFF0000,0x859CFA76,0x511D724B,0x00000000
-	long		0x3FFF0000,0x87952ECF,0xFF8131E7,0x00000000
-	long		0x3FFF0000,0x89732FD1,0x9557641B,0x00000000
-	long		0x3FFF0000,0x8B38CAD1,0x01932A35,0x00000000
-	long		0x3FFF0000,0x8CE7A8D8,0x301EE6B5,0x00000000
-	long		0x3FFF0000,0x8F46A39E,0x2EAE5281,0x00000000
-	long		0x3FFF0000,0x922DA7D7,0x91888487,0x00000000
-	long		0x3FFF0000,0x94D19FCB,0xDEDF5241,0x00000000
-	long		0x3FFF0000,0x973AB944,0x19D2A08B,0x00000000
-	long		0x3FFF0000,0x996FF00E,0x08E10B96,0x00000000
-	long		0x3FFF0000,0x9B773F95,0x12321DA7,0x00000000
-	long		0x3FFF0000,0x9D55CC32,0x0F935624,0x00000000
-	long		0x3FFF0000,0x9F100575,0x006CC571,0x00000000
-	long		0x3FFF0000,0xA0A9C290,0xD97CC06C,0x00000000
-	long		0x3FFF0000,0xA22659EB,0xEBC0630A,0x00000000
-	long		0x3FFF0000,0xA388B4AF,0xF6EF0EC9,0x00000000
-	long		0x3FFF0000,0xA4D35F10,0x61D292C4,0x00000000
-	long		0x3FFF0000,0xA60895DC,0xFBE3187E,0x00000000
-	long		0x3FFF0000,0xA72A51DC,0x7367BEAC,0x00000000
-	long		0x3FFF0000,0xA83A5153,0x0956168F,0x00000000
-	long		0x3FFF0000,0xA93A2007,0x7539546E,0x00000000
-	long		0x3FFF0000,0xAA9E7245,0x023B2605,0x00000000
-	long		0x3FFF0000,0xAC4C84BA,0x6FE4D58F,0x00000000
-	long		0x3FFF0000,0xADCE4A4A,0x606B9712,0x00000000
-	long		0x3FFF0000,0xAF2A2DCD,0x8D263C9C,0x00000000
-	long		0x3FFF0000,0xB0656F81,0xF22265C7,0x00000000
-	long		0x3FFF0000,0xB1846515,0x0F71496A,0x00000000
-	long		0x3FFF0000,0xB28AAA15,0x6F9ADA35,0x00000000
-	long		0x3FFF0000,0xB37B44FF,0x3766B895,0x00000000
-	long		0x3FFF0000,0xB458C3DC,0xE9630433,0x00000000
-	long		0x3FFF0000,0xB525529D,0x562246BD,0x00000000
-	long		0x3FFF0000,0xB5E2CCA9,0x5F9D88CC,0x00000000
-	long		0x3FFF0000,0xB692CADA,0x7ACA1ADA,0x00000000
-	long		0x3FFF0000,0xB736AEA7,0xA6925838,0x00000000
-	long		0x3FFF0000,0xB7CFAB28,0x7E9F7B36,0x00000000
-	long		0x3FFF0000,0xB85ECC66,0xCB219835,0x00000000
-	long		0x3FFF0000,0xB8E4FD5A,0x20A593DA,0x00000000
-	long		0x3FFF0000,0xB99F41F6,0x4AFF9BB5,0x00000000
-	long		0x3FFF0000,0xBA7F1E17,0x842BBE7B,0x00000000
-	long		0x3FFF0000,0xBB471285,0x7637E17D,0x00000000
-	long		0x3FFF0000,0xBBFABE8A,0x4788DF6F,0x00000000
-	long		0x3FFF0000,0xBC9D0FAD,0x2B689D79,0x00000000
-	long		0x3FFF0000,0xBD306A39,0x471ECD86,0x00000000
-	long		0x3FFF0000,0xBDB6C731,0x856AF18A,0x00000000
-	long		0x3FFF0000,0xBE31CAC5,0x02E80D70,0x00000000
-	long		0x3FFF0000,0xBEA2D55C,0xE33194E2,0x00000000
-	long		0x3FFF0000,0xBF0B10B7,0xC03128F0,0x00000000
-	long		0x3FFF0000,0xBF6B7A18,0xDACB778D,0x00000000
-	long		0x3FFF0000,0xBFC4EA46,0x63FA18F6,0x00000000
-	long		0x3FFF0000,0xC0181BDE,0x8B89A454,0x00000000
-	long		0x3FFF0000,0xC065B066,0xCFBF6439,0x00000000
-	long		0x3FFF0000,0xC0AE345F,0x56340AE6,0x00000000
-	long		0x3FFF0000,0xC0F22291,0x9CB9E6A7,0x00000000
-
-	set		X,FP_SCR0
-	set		XDCARE,X+2
-	set		XFRAC,X+4
-	set		XFRACLO,X+8
-
-	set		ATANF,FP_SCR1
-	set		ATANFHI,ATANF+4
-	set		ATANFLO,ATANF+8
-
-	global		satan
-#--ENTRY POINT FOR ATAN(X), HERE X IS FINITE, NON-ZERO, AND NOT NAN'S
-satan:
-	fmov.x		(%a0),%fp0		# LOAD INPUT
-
-	mov.l		(%a0),%d1
-	mov.w		4(%a0),%d1
-	fmov.x		%fp0,X(%a6)
-	and.l		&0x7FFFFFFF,%d1
-
-	cmp.l		%d1,&0x3FFB8000		# |X| >= 1/16?
-	bge.b		ATANOK1
-	bra.w		ATANSM
-
-ATANOK1:
-	cmp.l		%d1,&0x4002FFFF		# |X| < 16 ?
-	ble.b		ATANMAIN
-	bra.w		ATANBIG
-
-#--THE MOST LIKELY CASE, |X| IN [1/16, 16). WE USE TABLE TECHNIQUE
-#--THE IDEA IS ATAN(X) = ATAN(F) + ATAN( [X-F] / [1+XF] ).
-#--SO IF F IS CHOSEN TO BE CLOSE TO X AND ATAN(F) IS STORED IN
-#--A TABLE, ALL WE NEED IS TO APPROXIMATE ATAN(U) WHERE
-#--U = (X-F)/(1+XF) IS SMALL (REMEMBER F IS CLOSE TO X). IT IS
-#--TRUE THAT A DIVIDE IS NOW NEEDED, BUT THE APPROXIMATION FOR
-#--ATAN(U) IS A VERY SHORT POLYNOMIAL AND THE INDEXING TO
-#--FETCH F AND SAVING OF REGISTERS CAN BE ALL HIDED UNDER THE
-#--DIVIDE. IN THE END THIS METHOD IS MUCH FASTER THAN A TRADITIONAL
-#--ONE. NOTE ALSO THAT THE TRADITIONAL SCHEME THAT APPROXIMATE
-#--ATAN(X) DIRECTLY WILL NEED TO USE A RATIONAL APPROXIMATION
-#--(DIVISION NEEDED) ANYWAY BECAUSE A POLYNOMIAL APPROXIMATION
-#--WILL INVOLVE A VERY LONG POLYNOMIAL.
-
-#--NOW WE SEE X AS +-2^K * 1.BBBBBBB....B <- 1. + 63 BITS
-#--WE CHOSE F TO BE +-2^K * 1.BBBB1
-#--THAT IS IT MATCHES THE EXPONENT AND FIRST 5 BITS OF X, THE
-#--SIXTH BITS IS SET TO BE 1. SINCE K = -4, -3, ..., 3, THERE
-#--ARE ONLY 8 TIMES 16 = 2^7 = 128 |F|'S. SINCE ATAN(-|F|) IS
-#-- -ATAN(|F|), WE NEED TO STORE ONLY ATAN(|F|).
-
-ATANMAIN:
-
-	and.l		&0xF8000000,XFRAC(%a6)	# FIRST 5 BITS
-	or.l		&0x04000000,XFRAC(%a6)	# SET 6-TH BIT TO 1
-	mov.l		&0x00000000,XFRACLO(%a6) # LOCATION OF X IS NOW F
-
-	fmov.x		%fp0,%fp1		# FP1 IS X
-	fmul.x		X(%a6),%fp1		# FP1 IS X*F, NOTE THAT X*F > 0
-	fsub.x		X(%a6),%fp0		# FP0 IS X-F
-	fadd.s		&0x3F800000,%fp1	# FP1 IS 1 + X*F
-	fdiv.x		%fp1,%fp0		# FP0 IS U = (X-F)/(1+X*F)
-
-#--WHILE THE DIVISION IS TAKING ITS TIME, WE FETCH ATAN(|F|)
-#--CREATE ATAN(F) AND STORE IT IN ATANF, AND
-#--SAVE REGISTERS FP2.
-
-	mov.l		%d2,-(%sp)		# SAVE d2 TEMPORARILY
-	mov.l		%d1,%d2			# THE EXP AND 16 BITS OF X
-	and.l		&0x00007800,%d1		# 4 VARYING BITS OF F'S FRACTION
-	and.l		&0x7FFF0000,%d2		# EXPONENT OF F
-	sub.l		&0x3FFB0000,%d2		# K+4
-	asr.l		&1,%d2
-	add.l		%d2,%d1			# THE 7 BITS IDENTIFYING F
-	asr.l		&7,%d1			# INDEX INTO TBL OF ATAN(|F|)
-	lea		ATANTBL(%pc),%a1
-	add.l		%d1,%a1			# ADDRESS OF ATAN(|F|)
-	mov.l		(%a1)+,ATANF(%a6)
-	mov.l		(%a1)+,ATANFHI(%a6)
-	mov.l		(%a1)+,ATANFLO(%a6)	# ATANF IS NOW ATAN(|F|)
-	mov.l		X(%a6),%d1		# LOAD SIGN AND EXPO. AGAIN
-	and.l		&0x80000000,%d1		# SIGN(F)
-	or.l		%d1,ATANF(%a6)		# ATANF IS NOW SIGN(F)*ATAN(|F|)
-	mov.l		(%sp)+,%d2		# RESTORE d2
-
-#--THAT'S ALL I HAVE TO DO FOR NOW,
-#--BUT ALAS, THE DIVIDE IS STILL CRANKING!
-
-#--U IN FP0, WE ARE NOW READY TO COMPUTE ATAN(U) AS
-#--U + A1*U*V*(A2 + V*(A3 + V)), V = U*U
-#--THE POLYNOMIAL MAY LOOK STRANGE, BUT IS NEVERTHELESS CORRECT.
-#--THE NATURAL FORM IS U + U*V*(A1 + V*(A2 + V*A3))
-#--WHAT WE HAVE HERE IS MERELY	A1 = A3, A2 = A1/A3, A3 = A2/A3.
-#--THE REASON FOR THIS REARRANGEMENT IS TO MAKE THE INDEPENDENT
-#--PARTS A1*U*V AND (A2 + ... STUFF) MORE LOAD-BALANCED
-
-	fmovm.x		&0x04,-(%sp)		# save fp2
-
-	fmov.x		%fp0,%fp1
-	fmul.x		%fp1,%fp1
-	fmov.d		ATANA3(%pc),%fp2
-	fadd.x		%fp1,%fp2		# A3+V
-	fmul.x		%fp1,%fp2		# V*(A3+V)
-	fmul.x		%fp0,%fp1		# U*V
-	fadd.d		ATANA2(%pc),%fp2	# A2+V*(A3+V)
-	fmul.d		ATANA1(%pc),%fp1	# A1*U*V
-	fmul.x		%fp2,%fp1		# A1*U*V*(A2+V*(A3+V))
-	fadd.x		%fp1,%fp0		# ATAN(U), FP1 RELEASED
-
-	fmovm.x		(%sp)+,&0x20		# restore fp2
-
-	fmov.l		%d0,%fpcr		# restore users rnd mode,prec
-	fadd.x		ATANF(%a6),%fp0		# ATAN(X)
-	bra		t_inx2
-
-ATANBORS:
-#--|X| IS IN d0 IN COMPACT FORM. FP1, d0 SAVED.
-#--FP0 IS X AND |X| <= 1/16 OR |X| >= 16.
-	cmp.l		%d1,&0x3FFF8000
-	bgt.w		ATANBIG			# I.E. |X| >= 16
-
-ATANSM:
-#--|X| <= 1/16
-#--IF |X| < 2^(-40), RETURN X AS ANSWER. OTHERWISE, APPROXIMATE
-#--ATAN(X) BY X + X*Y*(B1+Y*(B2+Y*(B3+Y*(B4+Y*(B5+Y*B6)))))
-#--WHICH IS X + X*Y*( [B1+Z*(B3+Z*B5)] + [Y*(B2+Z*(B4+Z*B6)] )
-#--WHERE Y = X*X, AND Z = Y*Y.
-
-	cmp.l		%d1,&0x3FD78000
-	blt.w		ATANTINY
-
-#--COMPUTE POLYNOMIAL
-	fmovm.x		&0x0c,-(%sp)		# save fp2/fp3
-
-	fmul.x		%fp0,%fp0		# FPO IS Y = X*X
-
-	fmov.x		%fp0,%fp1
-	fmul.x		%fp1,%fp1		# FP1 IS Z = Y*Y
-
-	fmov.d		ATANB6(%pc),%fp2
-	fmov.d		ATANB5(%pc),%fp3
-
-	fmul.x		%fp1,%fp2		# Z*B6
-	fmul.x		%fp1,%fp3		# Z*B5
-
-	fadd.d		ATANB4(%pc),%fp2	# B4+Z*B6
-	fadd.d		ATANB3(%pc),%fp3	# B3+Z*B5
-
-	fmul.x		%fp1,%fp2		# Z*(B4+Z*B6)
-	fmul.x		%fp3,%fp1		# Z*(B3+Z*B5)
-
-	fadd.d		ATANB2(%pc),%fp2	# B2+Z*(B4+Z*B6)
-	fadd.d		ATANB1(%pc),%fp1	# B1+Z*(B3+Z*B5)
-
-	fmul.x		%fp0,%fp2		# Y*(B2+Z*(B4+Z*B6))
-	fmul.x		X(%a6),%fp0		# X*Y
-
-	fadd.x		%fp2,%fp1		# [B1+Z*(B3+Z*B5)]+[Y*(B2+Z*(B4+Z*B6))]
-
-	fmul.x		%fp1,%fp0		# X*Y*([B1+Z*(B3+Z*B5)]+[Y*(B2+Z*(B4+Z*B6))])
-
-	fmovm.x		(%sp)+,&0x30		# restore fp2/fp3
-
-	fmov.l		%d0,%fpcr		# restore users rnd mode,prec
-	fadd.x		X(%a6),%fp0
-	bra		t_inx2
-
-ATANTINY:
-#--|X| < 2^(-40), ATAN(X) = X
-
-	fmov.l		%d0,%fpcr		# restore users rnd mode,prec
-	mov.b		&FMOV_OP,%d1		# last inst is MOVE
-	fmov.x		X(%a6),%fp0		# last inst - possible exception set
-
-	bra		t_catch
-
-ATANBIG:
-#--IF |X| > 2^(100), RETURN	SIGN(X)*(PI/2 - TINY). OTHERWISE,
-#--RETURN SIGN(X)*PI/2 + ATAN(-1/X).
-	cmp.l		%d1,&0x40638000
-	bgt.w		ATANHUGE
-
-#--APPROXIMATE ATAN(-1/X) BY
-#--X'+X'*Y*(C1+Y*(C2+Y*(C3+Y*(C4+Y*C5)))), X' = -1/X, Y = X'*X'
-#--THIS CAN BE RE-WRITTEN AS
-#--X'+X'*Y*( [C1+Z*(C3+Z*C5)] + [Y*(C2+Z*C4)] ), Z = Y*Y.
-
-	fmovm.x		&0x0c,-(%sp)		# save fp2/fp3
-
-	fmov.s		&0xBF800000,%fp1	# LOAD -1
-	fdiv.x		%fp0,%fp1		# FP1 IS -1/X
-
-#--DIVIDE IS STILL CRANKING
-
-	fmov.x		%fp1,%fp0		# FP0 IS X'
-	fmul.x		%fp0,%fp0		# FP0 IS Y = X'*X'
-	fmov.x		%fp1,X(%a6)		# X IS REALLY X'
-
-	fmov.x		%fp0,%fp1
-	fmul.x		%fp1,%fp1		# FP1 IS Z = Y*Y
-
-	fmov.d		ATANC5(%pc),%fp3
-	fmov.d		ATANC4(%pc),%fp2
-
-	fmul.x		%fp1,%fp3		# Z*C5
-	fmul.x		%fp1,%fp2		# Z*B4
-
-	fadd.d		ATANC3(%pc),%fp3	# C3+Z*C5
-	fadd.d		ATANC2(%pc),%fp2	# C2+Z*C4
-
-	fmul.x		%fp3,%fp1		# Z*(C3+Z*C5), FP3 RELEASED
-	fmul.x		%fp0,%fp2		# Y*(C2+Z*C4)
-
-	fadd.d		ATANC1(%pc),%fp1	# C1+Z*(C3+Z*C5)
-	fmul.x		X(%a6),%fp0		# X'*Y
-
-	fadd.x		%fp2,%fp1		# [Y*(C2+Z*C4)]+[C1+Z*(C3+Z*C5)]
-
-	fmul.x		%fp1,%fp0		# X'*Y*([B1+Z*(B3+Z*B5)]
-#					...	+[Y*(B2+Z*(B4+Z*B6))])
-	fadd.x		X(%a6),%fp0
-
-	fmovm.x		(%sp)+,&0x30		# restore fp2/fp3
-
-	fmov.l		%d0,%fpcr		# restore users rnd mode,prec
-	tst.b		(%a0)
-	bpl.b		pos_big
-
-neg_big:
-	fadd.x		NPIBY2(%pc),%fp0
-	bra		t_minx2
-
-pos_big:
-	fadd.x		PPIBY2(%pc),%fp0
-	bra		t_pinx2
-
-ATANHUGE:
-#--RETURN SIGN(X)*(PIBY2 - TINY) = SIGN(X)*PIBY2 - SIGN(X)*TINY
-	tst.b		(%a0)
-	bpl.b		pos_huge
-
-neg_huge:
-	fmov.x		NPIBY2(%pc),%fp0
-	fmov.l		%d0,%fpcr
-	fadd.x		PTINY(%pc),%fp0
-	bra		t_minx2
-
-pos_huge:
-	fmov.x		PPIBY2(%pc),%fp0
-	fmov.l		%d0,%fpcr
-	fadd.x		NTINY(%pc),%fp0
-	bra		t_pinx2
-
-	global		satand
-#--ENTRY POINT FOR ATAN(X) FOR DENORMALIZED ARGUMENT
-satand:
-	bra		t_extdnrm
-
-#########################################################################
-# sasin():  computes the inverse sine of a normalized input		#
-# sasind(): computes the inverse sine of a denormalized input		#
-#									#
-# INPUT ***************************************************************	#
-#	a0 = pointer to extended precision input			#
-#	d0 = round precision,mode					#
-#									#
-# OUTPUT **************************************************************	#
-#	fp0 = arcsin(X)							#
-#									#
-# ACCURACY and MONOTONICITY *******************************************	#
-#	The returned result is within 3 ulps in	64 significant bit,	#
-#	i.e. within 0.5001 ulp to 53 bits if the result is subsequently	#
-#	rounded to double precision. The result is provably monotonic	#
-#	in double precision.						#
-#									#
-# ALGORITHM ***********************************************************	#
-#									#
-#	ASIN								#
-#	1. If |X| >= 1, go to 3.					#
-#									#
-#	2. (|X| < 1) Calculate asin(X) by				#
-#		z := sqrt( [1-X][1+X] )					#
-#		asin(X) = atan( x / z ).				#
-#		Exit.							#
-#									#
-#	3. If |X| > 1, go to 5.						#
-#									#
-#	4. (|X| = 1) sgn := sign(X), return asin(X) := sgn * Pi/2. Exit.#
-#									#
-#	5. (|X| > 1) Generate an invalid operation by 0 * infinity.	#
-#		Exit.							#
-#									#
-#########################################################################
-
-	global		sasin
-sasin:
-	fmov.x		(%a0),%fp0		# LOAD INPUT
-
-	mov.l		(%a0),%d1
-	mov.w		4(%a0),%d1
-	and.l		&0x7FFFFFFF,%d1
-	cmp.l		%d1,&0x3FFF8000
-	bge.b		ASINBIG
-
-# This catch is added here for the '060 QSP. Originally, the call to
-# satan() would handle this case by causing the exception which would
-# not be caught until gen_except(). Now, with the exceptions being
-# detected inside of satan(), the exception would have been handled there
-# instead of inside sasin() as expected.
-	cmp.l		%d1,&0x3FD78000
-	blt.w		ASINTINY
-
-#--THIS IS THE USUAL CASE, |X| < 1
-#--ASIN(X) = ATAN( X / SQRT( (1-X)(1+X) ) )
-
-ASINMAIN:
-	fmov.s		&0x3F800000,%fp1
-	fsub.x		%fp0,%fp1		# 1-X
-	fmovm.x		&0x4,-(%sp)		#  {fp2}
-	fmov.s		&0x3F800000,%fp2
-	fadd.x		%fp0,%fp2		# 1+X
-	fmul.x		%fp2,%fp1		# (1+X)(1-X)
-	fmovm.x		(%sp)+,&0x20		#  {fp2}
-	fsqrt.x		%fp1			# SQRT([1-X][1+X])
-	fdiv.x		%fp1,%fp0		# X/SQRT([1-X][1+X])
-	fmovm.x		&0x01,-(%sp)		# save X/SQRT(...)
-	lea		(%sp),%a0		# pass ptr to X/SQRT(...)
-	bsr		satan
-	add.l		&0xc,%sp		# clear X/SQRT(...) from stack
-	bra		t_inx2
-
-ASINBIG:
-	fabs.x		%fp0			# |X|
-	fcmp.s		%fp0,&0x3F800000
-	fbgt		t_operr			# cause an operr exception
-
-#--|X| = 1, ASIN(X) = +- PI/2.
-ASINONE:
-	fmov.x		PIBY2(%pc),%fp0
-	mov.l		(%a0),%d1
-	and.l		&0x80000000,%d1		# SIGN BIT OF X
-	or.l		&0x3F800000,%d1		# +-1 IN SGL FORMAT
-	mov.l		%d1,-(%sp)		# push SIGN(X) IN SGL-FMT
-	fmov.l		%d0,%fpcr
-	fmul.s		(%sp)+,%fp0
-	bra		t_inx2
-
-#--|X| < 2^(-40), ATAN(X) = X
-ASINTINY:
-	fmov.l		%d0,%fpcr		# restore users rnd mode,prec
-	mov.b		&FMOV_OP,%d1		# last inst is MOVE
-	fmov.x		(%a0),%fp0		# last inst - possible exception
-	bra		t_catch
-
-	global		sasind
-#--ASIN(X) = X FOR DENORMALIZED X
-sasind:
-	bra		t_extdnrm
-
-#########################################################################
-# sacos():  computes the inverse cosine of a normalized input		#
-# sacosd(): computes the inverse cosine of a denormalized input		#
-#									#
-# INPUT ***************************************************************	#
-#	a0 = pointer to extended precision input			#
-#	d0 = round precision,mode					#
-#									#
-# OUTPUT ************************************************************** #
-#	fp0 = arccos(X)							#
-#									#
-# ACCURACY and MONOTONICITY *******************************************	#
-#	The returned result is within 3 ulps in	64 significant bit,	#
-#	i.e. within 0.5001 ulp to 53 bits if the result is subsequently	#
-#	rounded to double precision. The result is provably monotonic	#
-#	in double precision.						#
-#									#
-# ALGORITHM *********************************************************** #
-#									#
-#	ACOS								#
-#	1. If |X| >= 1, go to 3.					#
-#									#
-#	2. (|X| < 1) Calculate acos(X) by				#
-#		z := (1-X) / (1+X)					#
-#		acos(X) = 2 * atan( sqrt(z) ).				#
-#		Exit.							#
-#									#
-#	3. If |X| > 1, go to 5.						#
-#									#
-#	4. (|X| = 1) If X > 0, return 0. Otherwise, return Pi. Exit.	#
-#									#
-#	5. (|X| > 1) Generate an invalid operation by 0 * infinity.	#
-#		Exit.							#
-#									#
-#########################################################################
-
-	global		sacos
-sacos:
-	fmov.x		(%a0),%fp0		# LOAD INPUT
-
-	mov.l		(%a0),%d1		# pack exp w/ upper 16 fraction
-	mov.w		4(%a0),%d1
-	and.l		&0x7FFFFFFF,%d1
-	cmp.l		%d1,&0x3FFF8000
-	bge.b		ACOSBIG
-
-#--THIS IS THE USUAL CASE, |X| < 1
-#--ACOS(X) = 2 * ATAN(	SQRT( (1-X)/(1+X) ) )
-
-ACOSMAIN:
-	fmov.s		&0x3F800000,%fp1
-	fadd.x		%fp0,%fp1		# 1+X
-	fneg.x		%fp0			# -X
-	fadd.s		&0x3F800000,%fp0	# 1-X
-	fdiv.x		%fp1,%fp0		# (1-X)/(1+X)
-	fsqrt.x		%fp0			# SQRT((1-X)/(1+X))
-	mov.l		%d0,-(%sp)		# save original users fpcr
-	clr.l		%d0
-	fmovm.x		&0x01,-(%sp)		# save SQRT(...) to stack
-	lea		(%sp),%a0		# pass ptr to sqrt
-	bsr		satan			# ATAN(SQRT([1-X]/[1+X]))
-	add.l		&0xc,%sp		# clear SQRT(...) from stack
-
-	fmov.l		(%sp)+,%fpcr		# restore users round prec,mode
-	fadd.x		%fp0,%fp0		# 2 * ATAN( STUFF )
-	bra		t_pinx2
-
-ACOSBIG:
-	fabs.x		%fp0
-	fcmp.s		%fp0,&0x3F800000
-	fbgt		t_operr			# cause an operr exception
-
-#--|X| = 1, ACOS(X) = 0 OR PI
-	tst.b		(%a0)			# is X positive or negative?
-	bpl.b		ACOSP1
-
-#--X = -1
-#Returns PI and inexact exception
-ACOSM1:
-	fmov.x		PI(%pc),%fp0		# load PI
-	fmov.l		%d0,%fpcr		# load round mode,prec
-	fadd.s		&0x00800000,%fp0	# add a small value
-	bra		t_pinx2
-
-ACOSP1:
-	bra		ld_pzero		# answer is positive zero
-
-	global		sacosd
-#--ACOS(X) = PI/2 FOR DENORMALIZED X
-sacosd:
-	fmov.l		%d0,%fpcr		# load user's rnd mode/prec
-	fmov.x		PIBY2(%pc),%fp0
-	bra		t_pinx2
-
-#########################################################################
-# setox():    computes the exponential for a normalized input		#
-# setoxd():   computes the exponential for a denormalized input		#
-# setoxm1():  computes the exponential minus 1 for a normalized input	#
-# setoxm1d(): computes the exponential minus 1 for a denormalized input	#
-#									#
-# INPUT	*************************************************************** #
-#	a0 = pointer to extended precision input			#
-#	d0 = round precision,mode					#
-#									#
-# OUTPUT ************************************************************** #
-#	fp0 = exp(X) or exp(X)-1					#
-#									#
-# ACCURACY and MONOTONICITY ******************************************* #
-#	The returned result is within 0.85 ulps in 64 significant bit,	#
-#	i.e. within 0.5001 ulp to 53 bits if the result is subsequently #
-#	rounded to double precision. The result is provably monotonic	#
-#	in double precision.						#
-#									#
-# ALGORITHM and IMPLEMENTATION **************************************** #
-#									#
-#	setoxd								#
-#	------								#
-#	Step 1.	Set ans := 1.0						#
-#									#
-#	Step 2.	Return	ans := ans + sign(X)*2^(-126). Exit.		#
-#	Notes:	This will always generate one exception -- inexact.	#
-#									#
-#									#
-#	setox								#
-#	-----								#
-#									#
-#	Step 1.	Filter out extreme cases of input argument.		#
-#		1.1	If |X| >= 2^(-65), go to Step 1.3.		#
-#		1.2	Go to Step 7.					#
-#		1.3	If |X| < 16380 log(2), go to Step 2.		#
-#		1.4	Go to Step 8.					#
-#	Notes:	The usual case should take the branches 1.1 -> 1.3 -> 2.#
-#		To avoid the use of floating-point comparisons, a	#
-#		compact representation of |X| is used. This format is a	#
-#		32-bit integer, the upper (more significant) 16 bits	#
-#		are the sign and biased exponent field of |X|; the	#
-#		lower 16 bits are the 16 most significant fraction	#
-#		(including the explicit bit) bits of |X|. Consequently,	#
-#		the comparisons in Steps 1.1 and 1.3 can be performed	#
-#		by integer comparison. Note also that the constant	#
-#		16380 log(2) used in Step 1.3 is also in the compact	#
-#		form. Thus taking the branch to Step 2 guarantees	#
-#		|X| < 16380 log(2). There is no harm to have a small	#
-#		number of cases where |X| is less than,	but close to,	#
-#		16380 log(2) and the branch to Step 9 is taken.		#
-#									#
-#	Step 2.	Calculate N = round-to-nearest-int( X * 64/log2 ).	#
-#		2.1	Set AdjFlag := 0 (indicates the branch 1.3 -> 2 #
-#			was taken)					#
-#		2.2	N := round-to-nearest-integer( X * 64/log2 ).	#
-#		2.3	Calculate	J = N mod 64; so J = 0,1,2,..., #
-#			or 63.						#
-#		2.4	Calculate	M = (N - J)/64; so N = 64M + J.	#
-#		2.5	Calculate the address of the stored value of	#
-#			2^(J/64).					#
-#		2.6	Create the value Scale = 2^M.			#
-#	Notes:	The calculation in 2.2 is really performed by		#
-#			Z := X * constant				#
-#			N := round-to-nearest-integer(Z)		#
-#		where							#
-#			constant := single-precision( 64/log 2 ).	#
-#									#
-#		Using a single-precision constant avoids memory		#
-#		access. Another effect of using a single-precision	#
-#		"constant" is that the calculated value Z is		#
-#									#
-#			Z = X*(64/log2)*(1+eps), |eps| <= 2^(-24).	#
-#									#
-#		This error has to be considered later in Steps 3 and 4.	#
-#									#
-#	Step 3.	Calculate X - N*log2/64.				#
-#		3.1	R := X + N*L1,					#
-#				where L1 := single-precision(-log2/64).	#
-#		3.2	R := R + N*L2,					#
-#				L2 := extended-precision(-log2/64 - L1).#
-#	Notes:	a) The way L1 and L2 are chosen ensures L1+L2		#
-#		approximate the value -log2/64 to 88 bits of accuracy.	#
-#		b) N*L1 is exact because N is no longer than 22 bits	#
-#		and L1 is no longer than 24 bits.			#
-#		c) The calculation X+N*L1 is also exact due to		#
-#		cancellation. Thus, R is practically X+N(L1+L2) to full	#
-#		64 bits.						#
-#		d) It is important to estimate how large can |R| be	#
-#		after Step 3.2.						#
-#									#
-#		N = rnd-to-int( X*64/log2 (1+eps) ), |eps|<=2^(-24)	#
-#		X*64/log2 (1+eps)	=	N + f,	|f| <= 0.5	#
-#		X*64/log2 - N	=	f - eps*X 64/log2		#
-#		X - N*log2/64	=	f*log2/64 - eps*X		#
-#									#
-#									#
-#		Now |X| <= 16446 log2, thus				#
-#									#
-#			|X - N*log2/64| <= (0.5 + 16446/2^(18))*log2/64	#
-#					<= 0.57 log2/64.		#
-#		 This bound will be used in Step 4.			#
-#									#
-#	Step 4.	Approximate exp(R)-1 by a polynomial			#
-#		p = R + R*R*(A1 + R*(A2 + R*(A3 + R*(A4 + R*A5))))	#
-#	Notes:	a) In order to reduce memory access, the coefficients	#
-#		are made as "short" as possible: A1 (which is 1/2), A4	#
-#		and A5 are single precision; A2 and A3 are double	#
-#		precision.						#
-#		b) Even with the restrictions above,			#
-#		   |p - (exp(R)-1)| < 2^(-68.8) for all |R| <= 0.0062.	#
-#		Note that 0.0062 is slightly bigger than 0.57 log2/64.	#
-#		c) To fully utilize the pipeline, p is separated into	#
-#		two independent pieces of roughly equal complexities	#
-#			p = [ R + R*S*(A2 + S*A4) ]	+		#
-#				[ S*(A1 + S*(A3 + S*A5)) ]		#
-#		where S = R*R.						#
-#									#
-#	Step 5.	Compute 2^(J/64)*exp(R) = 2^(J/64)*(1+p) by		#
-#				ans := T + ( T*p + t)			#
-#		where T and t are the stored values for 2^(J/64).	#
-#	Notes:	2^(J/64) is stored as T and t where T+t approximates	#
-#		2^(J/64) to roughly 85 bits; T is in extended precision	#
-#		and t is in single precision. Note also that T is	#
-#		rounded to 62 bits so that the last two bits of T are	#
-#		zero. The reason for such a special form is that T-1,	#
-#		T-2, and T-8 will all be exact --- a property that will	#
-#		give much more accurate computation of the function	#
-#		EXPM1.							#
-#									#
-#	Step 6.	Reconstruction of exp(X)				#
-#			exp(X) = 2^M * 2^(J/64) * exp(R).		#
-#		6.1	If AdjFlag = 0, go to 6.3			#
-#		6.2	ans := ans * AdjScale				#
-#		6.3	Restore the user FPCR				#
-#		6.4	Return ans := ans * Scale. Exit.		#
-#	Notes:	If AdjFlag = 0, we have X = Mlog2 + Jlog2/64 + R,	#
-#		|M| <= 16380, and Scale = 2^M. Moreover, exp(X) will	#
-#		neither overflow nor underflow. If AdjFlag = 1, that	#
-#		means that						#
-#			X = (M1+M)log2 + Jlog2/64 + R, |M1+M| >= 16380.	#
-#		Hence, exp(X) may overflow or underflow or neither.	#
-#		When that is the case, AdjScale = 2^(M1) where M1 is	#
-#		approximately M. Thus 6.2 will never cause		#
-#		over/underflow. Possible exception in 6.4 is overflow	#
-#		or underflow. The inexact exception is not generated in	#
-#		6.4. Although one can argue that the inexact flag	#
-#		should always be raised, to simulate that exception	#
-#		cost to much than the flag is worth in practical uses.	#
-#									#
-#	Step 7.	Return 1 + X.						#
-#		7.1	ans := X					#
-#		7.2	Restore user FPCR.				#
-#		7.3	Return ans := 1 + ans. Exit			#
-#	Notes:	For non-zero X, the inexact exception will always be	#
-#		raised by 7.3. That is the only exception raised by 7.3.#
-#		Note also that we use the FMOVEM instruction to move X	#
-#		in Step 7.1 to avoid unnecessary trapping. (Although	#
-#		the FMOVEM may not seem relevant since X is normalized,	#
-#		the precaution will be useful in the library version of	#
-#		this code where the separate entry for denormalized	#
-#		inputs will be done away with.)				#
-#									#
-#	Step 8.	Handle exp(X) where |X| >= 16380log2.			#
-#		8.1	If |X| > 16480 log2, go to Step 9.		#
-#		(mimic 2.2 - 2.6)					#
-#		8.2	N := round-to-integer( X * 64/log2 )		#
-#		8.3	Calculate J = N mod 64, J = 0,1,...,63		#
-#		8.4	K := (N-J)/64, M1 := truncate(K/2), M = K-M1,	#
-#			AdjFlag := 1.					#
-#		8.5	Calculate the address of the stored value	#
-#			2^(J/64).					#
-#		8.6	Create the values Scale = 2^M, AdjScale = 2^M1.	#
-#		8.7	Go to Step 3.					#
-#	Notes:	Refer to notes for 2.2 - 2.6.				#
-#									#
-#	Step 9.	Handle exp(X), |X| > 16480 log2.			#
-#		9.1	If X < 0, go to 9.3				#
-#		9.2	ans := Huge, go to 9.4				#
-#		9.3	ans := Tiny.					#
-#		9.4	Restore user FPCR.				#
-#		9.5	Return ans := ans * ans. Exit.			#
-#	Notes:	Exp(X) will surely overflow or underflow, depending on	#
-#		X's sign. "Huge" and "Tiny" are respectively large/tiny	#
-#		extended-precision numbers whose square over/underflow	#
-#		with an inexact result. Thus, 9.5 always raises the	#
-#		inexact together with either overflow or underflow.	#
-#									#
-#	setoxm1d							#
-#	--------							#
-#									#
-#	Step 1.	Set ans := 0						#
-#									#
-#	Step 2.	Return	ans := X + ans. Exit.				#
-#	Notes:	This will return X with the appropriate rounding	#
-#		 precision prescribed by the user FPCR.			#
-#									#
-#	setoxm1								#
-#	-------								#
-#									#
-#	Step 1.	Check |X|						#
-#		1.1	If |X| >= 1/4, go to Step 1.3.			#
-#		1.2	Go to Step 7.					#
-#		1.3	If |X| < 70 log(2), go to Step 2.		#
-#		1.4	Go to Step 10.					#
-#	Notes:	The usual case should take the branches 1.1 -> 1.3 -> 2.#
-#		However, it is conceivable |X| can be small very often	#
-#		because EXPM1 is intended to evaluate exp(X)-1		#
-#		accurately when |X| is small. For further details on	#
-#		the comparisons, see the notes on Step 1 of setox.	#
-#									#
-#	Step 2.	Calculate N = round-to-nearest-int( X * 64/log2 ).	#
-#		2.1	N := round-to-nearest-integer( X * 64/log2 ).	#
-#		2.2	Calculate	J = N mod 64; so J = 0,1,2,..., #
-#			or 63.						#
-#		2.3	Calculate	M = (N - J)/64; so N = 64M + J.	#
-#		2.4	Calculate the address of the stored value of	#
-#			2^(J/64).					#
-#		2.5	Create the values Sc = 2^M and			#
-#			OnebySc := -2^(-M).				#
-#	Notes:	See the notes on Step 2 of setox.			#
-#									#
-#	Step 3.	Calculate X - N*log2/64.				#
-#		3.1	R := X + N*L1,					#
-#				where L1 := single-precision(-log2/64).	#
-#		3.2	R := R + N*L2,					#
-#				L2 := extended-precision(-log2/64 - L1).#
-#	Notes:	Applying the analysis of Step 3 of setox in this case	#
-#		shows that |R| <= 0.0055 (note that |X| <= 70 log2 in	#
-#		this case).						#
-#									#
-#	Step 4.	Approximate exp(R)-1 by a polynomial			#
-#			p = R+R*R*(A1+R*(A2+R*(A3+R*(A4+R*(A5+R*A6)))))	#
-#	Notes:	a) In order to reduce memory access, the coefficients	#
-#		are made as "short" as possible: A1 (which is 1/2), A5	#
-#		and A6 are single precision; A2, A3 and A4 are double	#
-#		precision.						#
-#		b) Even with the restriction above,			#
-#			|p - (exp(R)-1)| <	|R| * 2^(-72.7)		#
-#		for all |R| <= 0.0055.					#
-#		c) To fully utilize the pipeline, p is separated into	#
-#		two independent pieces of roughly equal complexity	#
-#			p = [ R*S*(A2 + S*(A4 + S*A6)) ]	+	#
-#				[ R + S*(A1 + S*(A3 + S*A5)) ]		#
-#		where S = R*R.						#
-#									#
-#	Step 5.	Compute 2^(J/64)*p by					#
-#				p := T*p				#
-#		where T and t are the stored values for 2^(J/64).	#
-#	Notes:	2^(J/64) is stored as T and t where T+t approximates	#
-#		2^(J/64) to roughly 85 bits; T is in extended precision	#
-#		and t is in single precision. Note also that T is	#
-#		rounded to 62 bits so that the last two bits of T are	#
-#		zero. The reason for such a special form is that T-1,	#
-#		T-2, and T-8 will all be exact --- a property that will	#
-#		be exploited in Step 6 below. The total relative error	#
-#		in p is no bigger than 2^(-67.7) compared to the final	#
-#		result.							#
-#									#
-#	Step 6.	Reconstruction of exp(X)-1				#
-#			exp(X)-1 = 2^M * ( 2^(J/64) + p - 2^(-M) ).	#
-#		6.1	If M <= 63, go to Step 6.3.			#
-#		6.2	ans := T + (p + (t + OnebySc)). Go to 6.6	#
-#		6.3	If M >= -3, go to 6.5.				#
-#		6.4	ans := (T + (p + t)) + OnebySc. Go to 6.6	#
-#		6.5	ans := (T + OnebySc) + (p + t).			#
-#		6.6	Restore user FPCR.				#
-#		6.7	Return ans := Sc * ans. Exit.			#
-#	Notes:	The various arrangements of the expressions give	#
-#		accurate evaluations.					#
-#									#
-#	Step 7.	exp(X)-1 for |X| < 1/4.					#
-#		7.1	If |X| >= 2^(-65), go to Step 9.		#
-#		7.2	Go to Step 8.					#
-#									#
-#	Step 8.	Calculate exp(X)-1, |X| < 2^(-65).			#
-#		8.1	If |X| < 2^(-16312), goto 8.3			#
-#		8.2	Restore FPCR; return ans := X - 2^(-16382).	#
-#			Exit.						#
-#		8.3	X := X * 2^(140).				#
-#		8.4	Restore FPCR; ans := ans - 2^(-16382).		#
-#		 Return ans := ans*2^(140). Exit			#
-#	Notes:	The idea is to return "X - tiny" under the user		#
-#		precision and rounding modes. To avoid unnecessary	#
-#		inefficiency, we stay away from denormalized numbers	#
-#		the best we can. For |X| >= 2^(-16312), the		#
-#		straightforward 8.2 generates the inexact exception as	#
-#		the case warrants.					#
-#									#
-#	Step 9.	Calculate exp(X)-1, |X| < 1/4, by a polynomial		#
-#			p = X + X*X*(B1 + X*(B2 + ... + X*B12))		#
-#	Notes:	a) In order to reduce memory access, the coefficients	#
-#		are made as "short" as possible: B1 (which is 1/2), B9	#
-#		to B12 are single precision; B3 to B8 are double	#
-#		precision; and B2 is double extended.			#
-#		b) Even with the restriction above,			#
-#			|p - (exp(X)-1)| < |X| 2^(-70.6)		#
-#		for all |X| <= 0.251.					#
-#		Note that 0.251 is slightly bigger than 1/4.		#
-#		c) To fully preserve accuracy, the polynomial is	#
-#		computed as						#
-#			X + ( S*B1 +	Q ) where S = X*X and		#
-#			Q	=	X*S*(B2 + X*(B3 + ... + X*B12))	#
-#		d) To fully utilize the pipeline, Q is separated into	#
-#		two independent pieces of roughly equal complexity	#
-#			Q = [ X*S*(B2 + S*(B4 + ... + S*B12)) ] +	#
-#				[ S*S*(B3 + S*(B5 + ... + S*B11)) ]	#
-#									#
-#	Step 10. Calculate exp(X)-1 for |X| >= 70 log 2.		#
-#		10.1 If X >= 70log2 , exp(X) - 1 = exp(X) for all	#
-#		practical purposes. Therefore, go to Step 1 of setox.	#
-#		10.2 If X <= -70log2, exp(X) - 1 = -1 for all practical	#
-#		purposes.						#
-#		ans := -1						#
-#		Restore user FPCR					#
-#		Return ans := ans + 2^(-126). Exit.			#
-#	Notes:	10.2 will always create an inexact and return -1 + tiny	#
-#		in the user rounding precision and mode.		#
-#									#
-#########################################################################
-
-L2:	long		0x3FDC0000,0x82E30865,0x4361C4C6,0x00000000
-
-EEXPA3:	long		0x3FA55555,0x55554CC1
-EEXPA2:	long		0x3FC55555,0x55554A54
-
-EM1A4:	long		0x3F811111,0x11174385
-EM1A3:	long		0x3FA55555,0x55554F5A
-
-EM1A2:	long		0x3FC55555,0x55555555,0x00000000,0x00000000
-
-EM1B8:	long		0x3EC71DE3,0xA5774682
-EM1B7:	long		0x3EFA01A0,0x19D7CB68
-
-EM1B6:	long		0x3F2A01A0,0x1A019DF3
-EM1B5:	long		0x3F56C16C,0x16C170E2
-
-EM1B4:	long		0x3F811111,0x11111111
-EM1B3:	long		0x3FA55555,0x55555555
-
-EM1B2:	long		0x3FFC0000,0xAAAAAAAA,0xAAAAAAAB
-	long		0x00000000
-
-TWO140:	long		0x48B00000,0x00000000
-TWON140:
-	long		0x37300000,0x00000000
-
-EEXPTBL:
-	long		0x3FFF0000,0x80000000,0x00000000,0x00000000
-	long		0x3FFF0000,0x8164D1F3,0xBC030774,0x9F841A9B
-	long		0x3FFF0000,0x82CD8698,0xAC2BA1D8,0x9FC1D5B9
-	long		0x3FFF0000,0x843A28C3,0xACDE4048,0xA0728369
-	long		0x3FFF0000,0x85AAC367,0xCC487B14,0x1FC5C95C
-	long		0x3FFF0000,0x871F6196,0x9E8D1010,0x1EE85C9F
-	long		0x3FFF0000,0x88980E80,0x92DA8528,0x9FA20729
-	long		0x3FFF0000,0x8A14D575,0x496EFD9C,0xA07BF9AF
-	long		0x3FFF0000,0x8B95C1E3,0xEA8BD6E8,0xA0020DCF
-	long		0x3FFF0000,0x8D1ADF5B,0x7E5BA9E4,0x205A63DA
-	long		0x3FFF0000,0x8EA4398B,0x45CD53C0,0x1EB70051
-	long		0x3FFF0000,0x9031DC43,0x1466B1DC,0x1F6EB029
-	long		0x3FFF0000,0x91C3D373,0xAB11C338,0xA0781494
-	long		0x3FFF0000,0x935A2B2F,0x13E6E92C,0x9EB319B0
-	long		0x3FFF0000,0x94F4EFA8,0xFEF70960,0x2017457D
-	long		0x3FFF0000,0x96942D37,0x20185A00,0x1F11D537
-	long		0x3FFF0000,0x9837F051,0x8DB8A970,0x9FB952DD
-	long		0x3FFF0000,0x99E04593,0x20B7FA64,0x1FE43087
-	long		0x3FFF0000,0x9B8D39B9,0xD54E5538,0x1FA2A818
-	long		0x3FFF0000,0x9D3ED9A7,0x2CFFB750,0x1FDE494D
-	long		0x3FFF0000,0x9EF53260,0x91A111AC,0x20504890
-	long		0x3FFF0000,0xA0B0510F,0xB9714FC4,0xA073691C
-	long		0x3FFF0000,0xA2704303,0x0C496818,0x1F9B7A05
-	long		0x3FFF0000,0xA43515AE,0x09E680A0,0xA0797126
-	long		0x3FFF0000,0xA5FED6A9,0xB15138EC,0xA071A140
-	long		0x3FFF0000,0xA7CD93B4,0xE9653568,0x204F62DA
-	long		0x3FFF0000,0xA9A15AB4,0xEA7C0EF8,0x1F283C4A
-	long		0x3FFF0000,0xAB7A39B5,0xA93ED338,0x9F9A7FDC
-	long		0x3FFF0000,0xAD583EEA,0x42A14AC8,0xA05B3FAC
-	long		0x3FFF0000,0xAF3B78AD,0x690A4374,0x1FDF2610
-	long		0x3FFF0000,0xB123F581,0xD2AC2590,0x9F705F90
-	long		0x3FFF0000,0xB311C412,0xA9112488,0x201F678A
-	long		0x3FFF0000,0xB504F333,0xF9DE6484,0x1F32FB13
-	long		0x3FFF0000,0xB6FD91E3,0x28D17790,0x20038B30
-	long		0x3FFF0000,0xB8FBAF47,0x62FB9EE8,0x200DC3CC
-	long		0x3FFF0000,0xBAFF5AB2,0x133E45FC,0x9F8B2AE6
-	long		0x3FFF0000,0xBD08A39F,0x580C36C0,0xA02BBF70
-	long		0x3FFF0000,0xBF1799B6,0x7A731084,0xA00BF518
-	long		0x3FFF0000,0xC12C4CCA,0x66709458,0xA041DD41
-	long		0x3FFF0000,0xC346CCDA,0x24976408,0x9FDF137B
-	long		0x3FFF0000,0xC5672A11,0x5506DADC,0x201F1568
-	long		0x3FFF0000,0xC78D74C8,0xABB9B15C,0x1FC13A2E
-	long		0x3FFF0000,0xC9B9BD86,0x6E2F27A4,0xA03F8F03
-	long		0x3FFF0000,0xCBEC14FE,0xF2727C5C,0x1FF4907D
-	long		0x3FFF0000,0xCE248C15,0x1F8480E4,0x9E6E53E4
-	long		0x3FFF0000,0xD06333DA,0xEF2B2594,0x1FD6D45C
-	long		0x3FFF0000,0xD2A81D91,0xF12AE45C,0xA076EDB9
-	long		0x3FFF0000,0xD4F35AAB,0xCFEDFA20,0x9FA6DE21
-	long		0x3FFF0000,0xD744FCCA,0xD69D6AF4,0x1EE69A2F
-	long		0x3FFF0000,0xD99D15C2,0x78AFD7B4,0x207F439F
-	long		0x3FFF0000,0xDBFBB797,0xDAF23754,0x201EC207
-	long		0x3FFF0000,0xDE60F482,0x5E0E9124,0x9E8BE175
-	long		0x3FFF0000,0xE0CCDEEC,0x2A94E110,0x20032C4B
-	long		0x3FFF0000,0xE33F8972,0xBE8A5A50,0x2004DFF5
-	long		0x3FFF0000,0xE5B906E7,0x7C8348A8,0x1E72F47A
-	long		0x3FFF0000,0xE8396A50,0x3C4BDC68,0x1F722F22
-	long		0x3FFF0000,0xEAC0C6E7,0xDD243930,0xA017E945
-	long		0x3FFF0000,0xED4F301E,0xD9942B84,0x1F401A5B
-	long		0x3FFF0000,0xEFE4B99B,0xDCDAF5CC,0x9FB9A9E3
-	long		0x3FFF0000,0xF281773C,0x59FFB138,0x20744C05
-	long		0x3FFF0000,0xF5257D15,0x2486CC2C,0x1F773A19
-	long		0x3FFF0000,0xF7D0DF73,0x0AD13BB8,0x1FFE90D5
-	long		0x3FFF0000,0xFA83B2DB,0x722A033C,0xA041ED22
-	long		0x3FFF0000,0xFD3E0C0C,0xF486C174,0x1F853F3A
-
-	set		ADJFLAG,L_SCR2
-	set		SCALE,FP_SCR0
-	set		ADJSCALE,FP_SCR1
-	set		SC,FP_SCR0
-	set		ONEBYSC,FP_SCR1
-
-	global		setox
-setox:
-#--entry point for EXP(X), here X is finite, non-zero, and not NaN's
-
-#--Step 1.
-	mov.l		(%a0),%d1		# load part of input X
-	and.l		&0x7FFF0000,%d1		# biased expo. of X
-	cmp.l		%d1,&0x3FBE0000		# 2^(-65)
-	bge.b		EXPC1			# normal case
-	bra		EXPSM
-
-EXPC1:
-#--The case |X| >= 2^(-65)
-	mov.w		4(%a0),%d1		# expo. and partial sig. of |X|
-	cmp.l		%d1,&0x400CB167		# 16380 log2 trunc. 16 bits
-	blt.b		EXPMAIN			# normal case
-	bra		EEXPBIG
-
-EXPMAIN:
-#--Step 2.
-#--This is the normal branch:	2^(-65) <= |X| < 16380 log2.
-	fmov.x		(%a0),%fp0		# load input from (a0)
-
-	fmov.x		%fp0,%fp1
-	fmul.s		&0x42B8AA3B,%fp0	# 64/log2 * X
-	fmovm.x		&0xc,-(%sp)		# save fp2 {%fp2/%fp3}
-	mov.l		&0,ADJFLAG(%a6)
-	fmov.l		%fp0,%d1		# N = int( X * 64/log2 )
-	lea		EEXPTBL(%pc),%a1
-	fmov.l		%d1,%fp0		# convert to floating-format
-
-	mov.l		%d1,L_SCR1(%a6)		# save N temporarily
-	and.l		&0x3F,%d1		# D0 is J = N mod 64
-	lsl.l		&4,%d1
-	add.l		%d1,%a1			# address of 2^(J/64)
-	mov.l		L_SCR1(%a6),%d1
-	asr.l		&6,%d1			# D0 is M
-	add.w		&0x3FFF,%d1		# biased expo. of 2^(M)
-	mov.w		L2(%pc),L_SCR1(%a6)	# prefetch L2, no need in CB
-
-EXPCONT1:
-#--Step 3.
-#--fp1,fp2 saved on the stack. fp0 is N, fp1 is X,
-#--a0 points to 2^(J/64), D0 is biased expo. of 2^(M)
-	fmov.x		%fp0,%fp2
-	fmul.s		&0xBC317218,%fp0	# N * L1, L1 = lead(-log2/64)
-	fmul.x		L2(%pc),%fp2		# N * L2, L1+L2 = -log2/64
-	fadd.x		%fp1,%fp0		# X + N*L1
-	fadd.x		%fp2,%fp0		# fp0 is R, reduced arg.
-
-#--Step 4.
-#--WE NOW COMPUTE EXP(R)-1 BY A POLYNOMIAL
-#-- R + R*R*(A1 + R*(A2 + R*(A3 + R*(A4 + R*A5))))
-#--TO FULLY UTILIZE THE PIPELINE, WE COMPUTE S = R*R
-#--[R+R*S*(A2+S*A4)] + [S*(A1+S*(A3+S*A5))]
-
-	fmov.x		%fp0,%fp1
-	fmul.x		%fp1,%fp1		# fp1 IS S = R*R
-
-	fmov.s		&0x3AB60B70,%fp2	# fp2 IS A5
-
-	fmul.x		%fp1,%fp2		# fp2 IS S*A5
-	fmov.x		%fp1,%fp3
-	fmul.s		&0x3C088895,%fp3	# fp3 IS S*A4
-
-	fadd.d		EEXPA3(%pc),%fp2	# fp2 IS A3+S*A5
-	fadd.d		EEXPA2(%pc),%fp3	# fp3 IS A2+S*A4
-
-	fmul.x		%fp1,%fp2		# fp2 IS S*(A3+S*A5)
-	mov.w		%d1,SCALE(%a6)		# SCALE is 2^(M) in extended
-	mov.l		&0x80000000,SCALE+4(%a6)
-	clr.l		SCALE+8(%a6)
-
-	fmul.x		%fp1,%fp3		# fp3 IS S*(A2+S*A4)
-
-	fadd.s		&0x3F000000,%fp2	# fp2 IS A1+S*(A3+S*A5)
-	fmul.x		%fp0,%fp3		# fp3 IS R*S*(A2+S*A4)
-
-	fmul.x		%fp1,%fp2		# fp2 IS S*(A1+S*(A3+S*A5))
-	fadd.x		%fp3,%fp0		# fp0 IS R+R*S*(A2+S*A4),
-
-	fmov.x		(%a1)+,%fp1		# fp1 is lead. pt. of 2^(J/64)
-	fadd.x		%fp2,%fp0		# fp0 is EXP(R) - 1
-
-#--Step 5
-#--final reconstruction process
-#--EXP(X) = 2^M * ( 2^(J/64) + 2^(J/64)*(EXP(R)-1) )
-
-	fmul.x		%fp1,%fp0		# 2^(J/64)*(Exp(R)-1)
-	fmovm.x		(%sp)+,&0x30		# fp2 restored {%fp2/%fp3}
-	fadd.s		(%a1),%fp0		# accurate 2^(J/64)
-
-	fadd.x		%fp1,%fp0		# 2^(J/64) + 2^(J/64)*...
-	mov.l		ADJFLAG(%a6),%d1
-
-#--Step 6
-	tst.l		%d1
-	beq.b		NORMAL
-ADJUST:
-	fmul.x		ADJSCALE(%a6),%fp0
-NORMAL:
-	fmov.l		%d0,%fpcr		# restore user FPCR
-	mov.b		&FMUL_OP,%d1		# last inst is MUL
-	fmul.x		SCALE(%a6),%fp0		# multiply 2^(M)
-	bra		t_catch
-
-EXPSM:
-#--Step 7
-	fmovm.x		(%a0),&0x80		# load X
-	fmov.l		%d0,%fpcr
-	fadd.s		&0x3F800000,%fp0	# 1+X in user mode
-	bra		t_pinx2
-
-EEXPBIG:
-#--Step 8
-	cmp.l		%d1,&0x400CB27C		# 16480 log2
-	bgt.b		EXP2BIG
-#--Steps 8.2 -- 8.6
-	fmov.x		(%a0),%fp0		# load input from (a0)
-
-	fmov.x		%fp0,%fp1
-	fmul.s		&0x42B8AA3B,%fp0	# 64/log2 * X
-	fmovm.x		&0xc,-(%sp)		# save fp2 {%fp2/%fp3}
-	mov.l		&1,ADJFLAG(%a6)
-	fmov.l		%fp0,%d1		# N = int( X * 64/log2 )
-	lea		EEXPTBL(%pc),%a1
-	fmov.l		%d1,%fp0		# convert to floating-format
-	mov.l		%d1,L_SCR1(%a6)		# save N temporarily
-	and.l		&0x3F,%d1		# D0 is J = N mod 64
-	lsl.l		&4,%d1
-	add.l		%d1,%a1			# address of 2^(J/64)
-	mov.l		L_SCR1(%a6),%d1
-	asr.l		&6,%d1			# D0 is K
-	mov.l		%d1,L_SCR1(%a6)		# save K temporarily
-	asr.l		&1,%d1			# D0 is M1
-	sub.l		%d1,L_SCR1(%a6)		# a1 is M
-	add.w		&0x3FFF,%d1		# biased expo. of 2^(M1)
-	mov.w		%d1,ADJSCALE(%a6)	# ADJSCALE := 2^(M1)
-	mov.l		&0x80000000,ADJSCALE+4(%a6)
-	clr.l		ADJSCALE+8(%a6)
-	mov.l		L_SCR1(%a6),%d1		# D0 is M
-	add.w		&0x3FFF,%d1		# biased expo. of 2^(M)
-	bra.w		EXPCONT1		# go back to Step 3
-
-EXP2BIG:
-#--Step 9
-	tst.b		(%a0)			# is X positive or negative?
-	bmi		t_unfl2
-	bra		t_ovfl2
-
-	global		setoxd
-setoxd:
-#--entry point for EXP(X), X is denormalized
-	mov.l		(%a0),-(%sp)
-	andi.l		&0x80000000,(%sp)
-	ori.l		&0x00800000,(%sp)	# sign(X)*2^(-126)
-
-	fmov.s		&0x3F800000,%fp0
-
-	fmov.l		%d0,%fpcr
-	fadd.s		(%sp)+,%fp0
-	bra		t_pinx2
-
-	global		setoxm1
-setoxm1:
-#--entry point for EXPM1(X), here X is finite, non-zero, non-NaN
-
-#--Step 1.
-#--Step 1.1
-	mov.l		(%a0),%d1		# load part of input X
-	and.l		&0x7FFF0000,%d1		# biased expo. of X
-	cmp.l		%d1,&0x3FFD0000		# 1/4
-	bge.b		EM1CON1			# |X| >= 1/4
-	bra		EM1SM
-
-EM1CON1:
-#--Step 1.3
-#--The case |X| >= 1/4
-	mov.w		4(%a0),%d1		# expo. and partial sig. of |X|
-	cmp.l		%d1,&0x4004C215		# 70log2 rounded up to 16 bits
-	ble.b		EM1MAIN			# 1/4 <= |X| <= 70log2
-	bra		EM1BIG
-
-EM1MAIN:
-#--Step 2.
-#--This is the case:	1/4 <= |X| <= 70 log2.
-	fmov.x		(%a0),%fp0		# load input from (a0)
-
-	fmov.x		%fp0,%fp1
-	fmul.s		&0x42B8AA3B,%fp0	# 64/log2 * X
-	fmovm.x		&0xc,-(%sp)		# save fp2 {%fp2/%fp3}
-	fmov.l		%fp0,%d1		# N = int( X * 64/log2 )
-	lea		EEXPTBL(%pc),%a1
-	fmov.l		%d1,%fp0		# convert to floating-format
-
-	mov.l		%d1,L_SCR1(%a6)		# save N temporarily
-	and.l		&0x3F,%d1		# D0 is J = N mod 64
-	lsl.l		&4,%d1
-	add.l		%d1,%a1			# address of 2^(J/64)
-	mov.l		L_SCR1(%a6),%d1
-	asr.l		&6,%d1			# D0 is M
-	mov.l		%d1,L_SCR1(%a6)		# save a copy of M
-
-#--Step 3.
-#--fp1,fp2 saved on the stack. fp0 is N, fp1 is X,
-#--a0 points to 2^(J/64), D0 and a1 both contain M
-	fmov.x		%fp0,%fp2
-	fmul.s		&0xBC317218,%fp0	# N * L1, L1 = lead(-log2/64)
-	fmul.x		L2(%pc),%fp2		# N * L2, L1+L2 = -log2/64
-	fadd.x		%fp1,%fp0		# X + N*L1
-	fadd.x		%fp2,%fp0		# fp0 is R, reduced arg.
-	add.w		&0x3FFF,%d1		# D0 is biased expo. of 2^M
-
-#--Step 4.
-#--WE NOW COMPUTE EXP(R)-1 BY A POLYNOMIAL
-#-- R + R*R*(A1 + R*(A2 + R*(A3 + R*(A4 + R*(A5 + R*A6)))))
-#--TO FULLY UTILIZE THE PIPELINE, WE COMPUTE S = R*R
-#--[R*S*(A2+S*(A4+S*A6))] + [R+S*(A1+S*(A3+S*A5))]
-
-	fmov.x		%fp0,%fp1
-	fmul.x		%fp1,%fp1		# fp1 IS S = R*R
-
-	fmov.s		&0x3950097B,%fp2	# fp2 IS a6
-
-	fmul.x		%fp1,%fp2		# fp2 IS S*A6
-	fmov.x		%fp1,%fp3
-	fmul.s		&0x3AB60B6A,%fp3	# fp3 IS S*A5
-
-	fadd.d		EM1A4(%pc),%fp2		# fp2 IS A4+S*A6
-	fadd.d		EM1A3(%pc),%fp3		# fp3 IS A3+S*A5
-	mov.w		%d1,SC(%a6)		# SC is 2^(M) in extended
-	mov.l		&0x80000000,SC+4(%a6)
-	clr.l		SC+8(%a6)
-
-	fmul.x		%fp1,%fp2		# fp2 IS S*(A4+S*A6)
-	mov.l		L_SCR1(%a6),%d1		# D0 is	M
-	neg.w		%d1			# D0 is -M
-	fmul.x		%fp1,%fp3		# fp3 IS S*(A3+S*A5)
-	add.w		&0x3FFF,%d1		# biased expo. of 2^(-M)
-	fadd.d		EM1A2(%pc),%fp2		# fp2 IS A2+S*(A4+S*A6)
-	fadd.s		&0x3F000000,%fp3	# fp3 IS A1+S*(A3+S*A5)
-
-	fmul.x		%fp1,%fp2		# fp2 IS S*(A2+S*(A4+S*A6))
-	or.w		&0x8000,%d1		# signed/expo. of -2^(-M)
-	mov.w		%d1,ONEBYSC(%a6)	# OnebySc is -2^(-M)
-	mov.l		&0x80000000,ONEBYSC+4(%a6)
-	clr.l		ONEBYSC+8(%a6)
-	fmul.x		%fp3,%fp1		# fp1 IS S*(A1+S*(A3+S*A5))
-
-	fmul.x		%fp0,%fp2		# fp2 IS R*S*(A2+S*(A4+S*A6))
-	fadd.x		%fp1,%fp0		# fp0 IS R+S*(A1+S*(A3+S*A5))
-
-	fadd.x		%fp2,%fp0		# fp0 IS EXP(R)-1
-
-	fmovm.x		(%sp)+,&0x30		# fp2 restored {%fp2/%fp3}
-
-#--Step 5
-#--Compute 2^(J/64)*p
-
-	fmul.x		(%a1),%fp0		# 2^(J/64)*(Exp(R)-1)
-
-#--Step 6
-#--Step 6.1
-	mov.l		L_SCR1(%a6),%d1		# retrieve M
-	cmp.l		%d1,&63
-	ble.b		MLE63
-#--Step 6.2	M >= 64
-	fmov.s		12(%a1),%fp1		# fp1 is t
-	fadd.x		ONEBYSC(%a6),%fp1	# fp1 is t+OnebySc
-	fadd.x		%fp1,%fp0		# p+(t+OnebySc), fp1 released
-	fadd.x		(%a1),%fp0		# T+(p+(t+OnebySc))
-	bra		EM1SCALE
-MLE63:
-#--Step 6.3	M <= 63
-	cmp.l		%d1,&-3
-	bge.b		MGEN3
-MLTN3:
-#--Step 6.4	M <= -4
-	fadd.s		12(%a1),%fp0		# p+t
-	fadd.x		(%a1),%fp0		# T+(p+t)
-	fadd.x		ONEBYSC(%a6),%fp0	# OnebySc + (T+(p+t))
-	bra		EM1SCALE
-MGEN3:
-#--Step 6.5	-3 <= M <= 63
-	fmov.x		(%a1)+,%fp1		# fp1 is T
-	fadd.s		(%a1),%fp0		# fp0 is p+t
-	fadd.x		ONEBYSC(%a6),%fp1	# fp1 is T+OnebySc
-	fadd.x		%fp1,%fp0		# (T+OnebySc)+(p+t)
-
-EM1SCALE:
-#--Step 6.6
-	fmov.l		%d0,%fpcr
-	fmul.x		SC(%a6),%fp0
-	bra		t_inx2
-
-EM1SM:
-#--Step 7	|X| < 1/4.
-	cmp.l		%d1,&0x3FBE0000		# 2^(-65)
-	bge.b		EM1POLY
-
-EM1TINY:
-#--Step 8	|X| < 2^(-65)
-	cmp.l		%d1,&0x00330000		# 2^(-16312)
-	blt.b		EM12TINY
-#--Step 8.2
-	mov.l		&0x80010000,SC(%a6)	# SC is -2^(-16382)
-	mov.l		&0x80000000,SC+4(%a6)
-	clr.l		SC+8(%a6)
-	fmov.x		(%a0),%fp0
-	fmov.l		%d0,%fpcr
-	mov.b		&FADD_OP,%d1		# last inst is ADD
-	fadd.x		SC(%a6),%fp0
-	bra		t_catch
-
-EM12TINY:
-#--Step 8.3
-	fmov.x		(%a0),%fp0
-	fmul.d		TWO140(%pc),%fp0
-	mov.l		&0x80010000,SC(%a6)
-	mov.l		&0x80000000,SC+4(%a6)
-	clr.l		SC+8(%a6)
-	fadd.x		SC(%a6),%fp0
-	fmov.l		%d0,%fpcr
-	mov.b		&FMUL_OP,%d1		# last inst is MUL
-	fmul.d		TWON140(%pc),%fp0
-	bra		t_catch
-
-EM1POLY:
-#--Step 9	exp(X)-1 by a simple polynomial
-	fmov.x		(%a0),%fp0		# fp0 is X
-	fmul.x		%fp0,%fp0		# fp0 is S := X*X
-	fmovm.x		&0xc,-(%sp)		# save fp2 {%fp2/%fp3}
-	fmov.s		&0x2F30CAA8,%fp1	# fp1 is B12
-	fmul.x		%fp0,%fp1		# fp1 is S*B12
-	fmov.s		&0x310F8290,%fp2	# fp2 is B11
-	fadd.s		&0x32D73220,%fp1	# fp1 is B10+S*B12
-
-	fmul.x		%fp0,%fp2		# fp2 is S*B11
-	fmul.x		%fp0,%fp1		# fp1 is S*(B10 + ...
-
-	fadd.s		&0x3493F281,%fp2	# fp2 is B9+S*...
-	fadd.d		EM1B8(%pc),%fp1		# fp1 is B8+S*...
-
-	fmul.x		%fp0,%fp2		# fp2 is S*(B9+...
-	fmul.x		%fp0,%fp1		# fp1 is S*(B8+...
-
-	fadd.d		EM1B7(%pc),%fp2		# fp2 is B7+S*...
-	fadd.d		EM1B6(%pc),%fp1		# fp1 is B6+S*...
-
-	fmul.x		%fp0,%fp2		# fp2 is S*(B7+...
-	fmul.x		%fp0,%fp1		# fp1 is S*(B6+...
-
-	fadd.d		EM1B5(%pc),%fp2		# fp2 is B5+S*...
-	fadd.d		EM1B4(%pc),%fp1		# fp1 is B4+S*...
-
-	fmul.x		%fp0,%fp2		# fp2 is S*(B5+...
-	fmul.x		%fp0,%fp1		# fp1 is S*(B4+...
-
-	fadd.d		EM1B3(%pc),%fp2		# fp2 is B3+S*...
-	fadd.x		EM1B2(%pc),%fp1		# fp1 is B2+S*...
-
-	fmul.x		%fp0,%fp2		# fp2 is S*(B3+...
-	fmul.x		%fp0,%fp1		# fp1 is S*(B2+...
-
-	fmul.x		%fp0,%fp2		# fp2 is S*S*(B3+...)
-	fmul.x		(%a0),%fp1		# fp1 is X*S*(B2...
-
-	fmul.s		&0x3F000000,%fp0	# fp0 is S*B1
-	fadd.x		%fp2,%fp1		# fp1 is Q
-
-	fmovm.x		(%sp)+,&0x30		# fp2 restored {%fp2/%fp3}
-
-	fadd.x		%fp1,%fp0		# fp0 is S*B1+Q
-
-	fmov.l		%d0,%fpcr
-	fadd.x		(%a0),%fp0
-	bra		t_inx2
-
-EM1BIG:
-#--Step 10	|X| > 70 log2
-	mov.l		(%a0),%d1
-	cmp.l		%d1,&0
-	bgt.w		EXPC1
-#--Step 10.2
-	fmov.s		&0xBF800000,%fp0	# fp0 is -1
-	fmov.l		%d0,%fpcr
-	fadd.s		&0x00800000,%fp0	# -1 + 2^(-126)
-	bra		t_minx2
-
-	global		setoxm1d
-setoxm1d:
-#--entry point for EXPM1(X), here X is denormalized
-#--Step 0.
-	bra		t_extdnrm
-
-#########################################################################
-# sgetexp():  returns the exponent portion of the input argument.	#
-#	      The exponent bias is removed and the exponent value is	#
-#	      returned as an extended precision number in fp0.		#
-# sgetexpd(): handles denormalized numbers.				#
-#									#
-# sgetman():  extracts the mantissa of the input argument. The		#
-#	      mantissa is converted to an extended precision number w/	#
-#	      an exponent of $3fff and is returned in fp0. The range of #
-#	      the result is [1.0 - 2.0).				#
-# sgetmand(): handles denormalized numbers.				#
-#									#
-# INPUT *************************************************************** #
-#	a0  = pointer to extended precision input			#
-#									#
-# OUTPUT ************************************************************** #
-#	fp0 = exponent(X) or mantissa(X)				#
-#									#
-#########################################################################
-
-	global		sgetexp
-sgetexp:
-	mov.w		SRC_EX(%a0),%d0		# get the exponent
-	bclr		&0xf,%d0		# clear the sign bit
-	subi.w		&0x3fff,%d0		# subtract off the bias
-	fmov.w		%d0,%fp0		# return exp in fp0
-	blt.b		sgetexpn		# it's negative
-	rts
-
-sgetexpn:
-	mov.b		&neg_bmask,FPSR_CC(%a6)	# set 'N' ccode bit
-	rts
-
-	global		sgetexpd
-sgetexpd:
-	bsr.l		norm			# normalize
-	neg.w		%d0			# new exp = -(shft amt)
-	subi.w		&0x3fff,%d0		# subtract off the bias
-	fmov.w		%d0,%fp0		# return exp in fp0
-	mov.b		&neg_bmask,FPSR_CC(%a6)	# set 'N' ccode bit
-	rts
-
-	global		sgetman
-sgetman:
-	mov.w		SRC_EX(%a0),%d0		# get the exp
-	ori.w		&0x7fff,%d0		# clear old exp
-	bclr		&0xe,%d0		# make it the new exp +-3fff
-
-# here, we build the result in a tmp location so as not to disturb the input
-	mov.l		SRC_HI(%a0),FP_SCR0_HI(%a6) # copy to tmp loc
-	mov.l		SRC_LO(%a0),FP_SCR0_LO(%a6) # copy to tmp loc
-	mov.w		%d0,FP_SCR0_EX(%a6)	# insert new exponent
-	fmov.x		FP_SCR0(%a6),%fp0	# put new value back in fp0
-	bmi.b		sgetmann		# it's negative
-	rts
-
-sgetmann:
-	mov.b		&neg_bmask,FPSR_CC(%a6)	# set 'N' ccode bit
-	rts
-
-#
-# For denormalized numbers, shift the mantissa until the j-bit = 1,
-# then load the exponent with +/1 $3fff.
-#
-	global		sgetmand
-sgetmand:
-	bsr.l		norm			# normalize exponent
-	bra.b		sgetman
-
-#########################################################################
-# scosh():  computes the hyperbolic cosine of a normalized input	#
-# scoshd(): computes the hyperbolic cosine of a denormalized input	#
-#									#
-# INPUT ***************************************************************	#
-#	a0 = pointer to extended precision input			#
-#	d0 = round precision,mode					#
-#									#
-# OUTPUT **************************************************************	#
-#	fp0 = cosh(X)							#
-#									#
-# ACCURACY and MONOTONICITY *******************************************	#
-#	The returned result is within 3 ulps in 64 significant bit,	#
-#	i.e. within 0.5001 ulp to 53 bits if the result is subsequently	#
-#	rounded to double precision. The result is provably monotonic	#
-#	in double precision.						#
-#									#
-# ALGORITHM ***********************************************************	#
-#									#
-#	COSH								#
-#	1. If |X| > 16380 log2, go to 3.				#
-#									#
-#	2. (|X| <= 16380 log2) Cosh(X) is obtained by the formulae	#
-#		y = |X|, z = exp(Y), and				#
-#		cosh(X) = (1/2)*( z + 1/z ).				#
-#		Exit.							#
-#									#
-#	3. (|X| > 16380 log2). If |X| > 16480 log2, go to 5.		#
-#									#
-#	4. (16380 log2 < |X| <= 16480 log2)				#
-#		cosh(X) = sign(X) * exp(|X|)/2.				#
-#		However, invoking exp(|X|) may cause premature		#
-#		overflow. Thus, we calculate sinh(X) as follows:	#
-#		Y	:= |X|						#
-#		Fact	:=	2**(16380)				#
-#		Y'	:= Y - 16381 log2				#
-#		cosh(X) := Fact * exp(Y').				#
-#		Exit.							#
-#									#
-#	5. (|X| > 16480 log2) sinh(X) must overflow. Return		#
-#		Huge*Huge to generate overflow and an infinity with	#
-#		the appropriate sign. Huge is the largest finite number	#
-#		in extended format. Exit.				#
-#									#
-#########################################################################
-
-TWO16380:
-	long		0x7FFB0000,0x80000000,0x00000000,0x00000000
-
-	global		scosh
-scosh:
-	fmov.x		(%a0),%fp0		# LOAD INPUT
-
-	mov.l		(%a0),%d1
-	mov.w		4(%a0),%d1
-	and.l		&0x7FFFFFFF,%d1
-	cmp.l		%d1,&0x400CB167
-	bgt.b		COSHBIG
-
-#--THIS IS THE USUAL CASE, |X| < 16380 LOG2
-#--COSH(X) = (1/2) * ( EXP(X) + 1/EXP(X) )
-
-	fabs.x		%fp0			# |X|
-
-	mov.l		%d0,-(%sp)
-	clr.l		%d0
-	fmovm.x		&0x01,-(%sp)		# save |X| to stack
-	lea		(%sp),%a0		# pass ptr to |X|
-	bsr		setox			# FP0 IS EXP(|X|)
-	add.l		&0xc,%sp		# erase |X| from stack
-	fmul.s		&0x3F000000,%fp0	# (1/2)EXP(|X|)
-	mov.l		(%sp)+,%d0
-
-	fmov.s		&0x3E800000,%fp1	# (1/4)
-	fdiv.x		%fp0,%fp1		# 1/(2 EXP(|X|))
-
-	fmov.l		%d0,%fpcr
-	mov.b		&FADD_OP,%d1		# last inst is ADD
-	fadd.x		%fp1,%fp0
-	bra		t_catch
-
-COSHBIG:
-	cmp.l		%d1,&0x400CB2B3
-	bgt.b		COSHHUGE
-
-	fabs.x		%fp0
-	fsub.d		T1(%pc),%fp0		# (|X|-16381LOG2_LEAD)
-	fsub.d		T2(%pc),%fp0		# |X| - 16381 LOG2, ACCURATE
-
-	mov.l		%d0,-(%sp)
-	clr.l		%d0
-	fmovm.x		&0x01,-(%sp)		# save fp0 to stack
-	lea		(%sp),%a0		# pass ptr to fp0
-	bsr		setox
-	add.l		&0xc,%sp		# clear fp0 from stack
-	mov.l		(%sp)+,%d0
-
-	fmov.l		%d0,%fpcr
-	mov.b		&FMUL_OP,%d1		# last inst is MUL
-	fmul.x		TWO16380(%pc),%fp0
-	bra		t_catch
-
-COSHHUGE:
-	bra		t_ovfl2
-
-	global		scoshd
-#--COSH(X) = 1 FOR DENORMALIZED X
-scoshd:
-	fmov.s		&0x3F800000,%fp0
-
-	fmov.l		%d0,%fpcr
-	fadd.s		&0x00800000,%fp0
-	bra		t_pinx2
-
-#########################################################################
-# ssinh():  computes the hyperbolic sine of a normalized input		#
-# ssinhd(): computes the hyperbolic sine of a denormalized input	#
-#									#
-# INPUT *************************************************************** #
-#	a0 = pointer to extended precision input			#
-#	d0 = round precision,mode					#
-#									#
-# OUTPUT ************************************************************** #
-#	fp0 = sinh(X)							#
-#									#
-# ACCURACY and MONOTONICITY *******************************************	#
-#	The returned result is within 3 ulps in 64 significant bit,	#
-#	i.e. within 0.5001 ulp to 53 bits if the result is subsequently #
-#	rounded to double precision. The result is provably monotonic	#
-#	in double precision.						#
-#									#
-# ALGORITHM *********************************************************** #
-#									#
-#       SINH								#
-#       1. If |X| > 16380 log2, go to 3.				#
-#									#
-#       2. (|X| <= 16380 log2) Sinh(X) is obtained by the formula	#
-#               y = |X|, sgn = sign(X), and z = expm1(Y),		#
-#               sinh(X) = sgn*(1/2)*( z + z/(1+z) ).			#
-#          Exit.							#
-#									#
-#       3. If |X| > 16480 log2, go to 5.				#
-#									#
-#       4. (16380 log2 < |X| <= 16480 log2)				#
-#               sinh(X) = sign(X) * exp(|X|)/2.				#
-#          However, invoking exp(|X|) may cause premature overflow.	#
-#          Thus, we calculate sinh(X) as follows:			#
-#             Y       := |X|						#
-#             sgn     := sign(X)					#
-#             sgnFact := sgn * 2**(16380)				#
-#             Y'      := Y - 16381 log2					#
-#             sinh(X) := sgnFact * exp(Y').				#
-#          Exit.							#
-#									#
-#       5. (|X| > 16480 log2) sinh(X) must overflow. Return		#
-#          sign(X)*Huge*Huge to generate overflow and an infinity with	#
-#          the appropriate sign. Huge is the largest finite number in	#
-#          extended format. Exit.					#
-#									#
-#########################################################################
-
-	global		ssinh
-ssinh:
-	fmov.x		(%a0),%fp0		# LOAD INPUT
-
-	mov.l		(%a0),%d1
-	mov.w		4(%a0),%d1
-	mov.l		%d1,%a1			# save (compacted) operand
-	and.l		&0x7FFFFFFF,%d1
-	cmp.l		%d1,&0x400CB167
-	bgt.b		SINHBIG
-
-#--THIS IS THE USUAL CASE, |X| < 16380 LOG2
-#--Y = |X|, Z = EXPM1(Y), SINH(X) = SIGN(X)*(1/2)*( Z + Z/(1+Z) )
-
-	fabs.x		%fp0			# Y = |X|
-
-	movm.l		&0x8040,-(%sp)		# {a1/d0}
-	fmovm.x		&0x01,-(%sp)		# save Y on stack
-	lea		(%sp),%a0		# pass ptr to Y
-	clr.l		%d0
-	bsr		setoxm1			# FP0 IS Z = EXPM1(Y)
-	add.l		&0xc,%sp		# clear Y from stack
-	fmov.l		&0,%fpcr
-	movm.l		(%sp)+,&0x0201		# {a1/d0}
-
-	fmov.x		%fp0,%fp1
-	fadd.s		&0x3F800000,%fp1	# 1+Z
-	fmov.x		%fp0,-(%sp)
-	fdiv.x		%fp1,%fp0		# Z/(1+Z)
-	mov.l		%a1,%d1
-	and.l		&0x80000000,%d1
-	or.l		&0x3F000000,%d1
-	fadd.x		(%sp)+,%fp0
-	mov.l		%d1,-(%sp)
-
-	fmov.l		%d0,%fpcr
-	mov.b		&FMUL_OP,%d1		# last inst is MUL
-	fmul.s		(%sp)+,%fp0		# last fp inst - possible exceptions set
-	bra		t_catch
-
-SINHBIG:
-	cmp.l		%d1,&0x400CB2B3
-	bgt		t_ovfl
-	fabs.x		%fp0
-	fsub.d		T1(%pc),%fp0		# (|X|-16381LOG2_LEAD)
-	mov.l		&0,-(%sp)
-	mov.l		&0x80000000,-(%sp)
-	mov.l		%a1,%d1
-	and.l		&0x80000000,%d1
-	or.l		&0x7FFB0000,%d1
-	mov.l		%d1,-(%sp)		# EXTENDED FMT
-	fsub.d		T2(%pc),%fp0		# |X| - 16381 LOG2, ACCURATE
-
-	mov.l		%d0,-(%sp)
-	clr.l		%d0
-	fmovm.x		&0x01,-(%sp)		# save fp0 on stack
-	lea		(%sp),%a0		# pass ptr to fp0
-	bsr		setox
-	add.l		&0xc,%sp		# clear fp0 from stack
-
-	mov.l		(%sp)+,%d0
-	fmov.l		%d0,%fpcr
-	mov.b		&FMUL_OP,%d1		# last inst is MUL
-	fmul.x		(%sp)+,%fp0		# possible exception
-	bra		t_catch
-
-	global		ssinhd
-#--SINH(X) = X FOR DENORMALIZED X
-ssinhd:
-	bra		t_extdnrm
-
-#########################################################################
-# stanh():  computes the hyperbolic tangent of a normalized input	#
-# stanhd(): computes the hyperbolic tangent of a denormalized input	#
-#									#
-# INPUT ***************************************************************	#
-#	a0 = pointer to extended precision input			#
-#	d0 = round precision,mode					#
-#									#
-# OUTPUT **************************************************************	#
-#	fp0 = tanh(X)							#
-#									#
-# ACCURACY and MONOTONICITY *******************************************	#
-#	The returned result is within 3 ulps in 64 significant bit,	#
-#	i.e. within 0.5001 ulp to 53 bits if the result is subsequently #
-#	rounded to double precision. The result is provably monotonic	#
-#	in double precision.						#
-#									#
-# ALGORITHM ***********************************************************	#
-#									#
-#	TANH								#
-#	1. If |X| >= (5/2) log2 or |X| <= 2**(-40), go to 3.		#
-#									#
-#	2. (2**(-40) < |X| < (5/2) log2) Calculate tanh(X) by		#
-#		sgn := sign(X), y := 2|X|, z := expm1(Y), and		#
-#		tanh(X) = sgn*( z/(2+z) ).				#
-#		Exit.							#
-#									#
-#	3. (|X| <= 2**(-40) or |X| >= (5/2) log2). If |X| < 1,		#
-#		go to 7.						#
-#									#
-#	4. (|X| >= (5/2) log2) If |X| >= 50 log2, go to 6.		#
-#									#
-#	5. ((5/2) log2 <= |X| < 50 log2) Calculate tanh(X) by		#
-#		sgn := sign(X), y := 2|X|, z := exp(Y),			#
-#		tanh(X) = sgn - [ sgn*2/(1+z) ].			#
-#		Exit.							#
-#									#
-#	6. (|X| >= 50 log2) Tanh(X) = +-1 (round to nearest). Thus, we	#
-#		calculate Tanh(X) by					#
-#		sgn := sign(X), Tiny := 2**(-126),			#
-#		tanh(X) := sgn - sgn*Tiny.				#
-#		Exit.							#
-#									#
-#	7. (|X| < 2**(-40)). Tanh(X) = X.	Exit.			#
-#									#
-#########################################################################
-
-	set		X,FP_SCR0
-	set		XFRAC,X+4
-
-	set		SGN,L_SCR3
-
-	set		V,FP_SCR0
-
-	global		stanh
-stanh:
-	fmov.x		(%a0),%fp0		# LOAD INPUT
-
-	fmov.x		%fp0,X(%a6)
-	mov.l		(%a0),%d1
-	mov.w		4(%a0),%d1
-	mov.l		%d1,X(%a6)
-	and.l		&0x7FFFFFFF,%d1
-	cmp.l		%d1, &0x3fd78000	# is |X| < 2^(-40)?
-	blt.w		TANHBORS		# yes
-	cmp.l		%d1, &0x3fffddce	# is |X| > (5/2)LOG2?
-	bgt.w		TANHBORS		# yes
-
-#--THIS IS THE USUAL CASE
-#--Y = 2|X|, Z = EXPM1(Y), TANH(X) = SIGN(X) * Z / (Z+2).
-
-	mov.l		X(%a6),%d1
-	mov.l		%d1,SGN(%a6)
-	and.l		&0x7FFF0000,%d1
-	add.l		&0x00010000,%d1		# EXPONENT OF 2|X|
-	mov.l		%d1,X(%a6)
-	and.l		&0x80000000,SGN(%a6)
-	fmov.x		X(%a6),%fp0		# FP0 IS Y = 2|X|
-
-	mov.l		%d0,-(%sp)
-	clr.l		%d0
-	fmovm.x		&0x1,-(%sp)		# save Y on stack
-	lea		(%sp),%a0		# pass ptr to Y
-	bsr		setoxm1			# FP0 IS Z = EXPM1(Y)
-	add.l		&0xc,%sp		# clear Y from stack
-	mov.l		(%sp)+,%d0
-
-	fmov.x		%fp0,%fp1
-	fadd.s		&0x40000000,%fp1	# Z+2
-	mov.l		SGN(%a6),%d1
-	fmov.x		%fp1,V(%a6)
-	eor.l		%d1,V(%a6)
-
-	fmov.l		%d0,%fpcr		# restore users round prec,mode
-	fdiv.x		V(%a6),%fp0
-	bra		t_inx2
-
-TANHBORS:
-	cmp.l		%d1,&0x3FFF8000
-	blt.w		TANHSM
-
-	cmp.l		%d1,&0x40048AA1
-	bgt.w		TANHHUGE
-
-#-- (5/2) LOG2 < |X| < 50 LOG2,
-#--TANH(X) = 1 - (2/[EXP(2X)+1]). LET Y = 2|X|, SGN = SIGN(X),
-#--TANH(X) = SGN -	SGN*2/[EXP(Y)+1].
-
-	mov.l		X(%a6),%d1
-	mov.l		%d1,SGN(%a6)
-	and.l		&0x7FFF0000,%d1
-	add.l		&0x00010000,%d1		# EXPO OF 2|X|
-	mov.l		%d1,X(%a6)		# Y = 2|X|
-	and.l		&0x80000000,SGN(%a6)
-	mov.l		SGN(%a6),%d1
-	fmov.x		X(%a6),%fp0		# Y = 2|X|
-
-	mov.l		%d0,-(%sp)
-	clr.l		%d0
-	fmovm.x		&0x01,-(%sp)		# save Y on stack
-	lea		(%sp),%a0		# pass ptr to Y
-	bsr		setox			# FP0 IS EXP(Y)
-	add.l		&0xc,%sp		# clear Y from stack
-	mov.l		(%sp)+,%d0
-	mov.l		SGN(%a6),%d1
-	fadd.s		&0x3F800000,%fp0	# EXP(Y)+1
-
-	eor.l		&0xC0000000,%d1		# -SIGN(X)*2
-	fmov.s		%d1,%fp1		# -SIGN(X)*2 IN SGL FMT
-	fdiv.x		%fp0,%fp1		# -SIGN(X)2 / [EXP(Y)+1 ]
-
-	mov.l		SGN(%a6),%d1
-	or.l		&0x3F800000,%d1		# SGN
-	fmov.s		%d1,%fp0		# SGN IN SGL FMT
-
-	fmov.l		%d0,%fpcr		# restore users round prec,mode
-	mov.b		&FADD_OP,%d1		# last inst is ADD
-	fadd.x		%fp1,%fp0
-	bra		t_inx2
-
-TANHSM:
-	fmov.l		%d0,%fpcr		# restore users round prec,mode
-	mov.b		&FMOV_OP,%d1		# last inst is MOVE
-	fmov.x		X(%a6),%fp0		# last inst - possible exception set
-	bra		t_catch
-
-#---RETURN SGN(X) - SGN(X)EPS
-TANHHUGE:
-	mov.l		X(%a6),%d1
-	and.l		&0x80000000,%d1
-	or.l		&0x3F800000,%d1
-	fmov.s		%d1,%fp0
-	and.l		&0x80000000,%d1
-	eor.l		&0x80800000,%d1		# -SIGN(X)*EPS
-
-	fmov.l		%d0,%fpcr		# restore users round prec,mode
-	fadd.s		%d1,%fp0
-	bra		t_inx2
-
-	global		stanhd
-#--TANH(X) = X FOR DENORMALIZED X
-stanhd:
-	bra		t_extdnrm
-
-#########################################################################
-# slogn():    computes the natural logarithm of a normalized input	#
-# slognd():   computes the natural logarithm of a denormalized input	#
-# slognp1():  computes the log(1+X) of a normalized input		#
-# slognp1d(): computes the log(1+X) of a denormalized input		#
-#									#
-# INPUT ***************************************************************	#
-#	a0 = pointer to extended precision input			#
-#	d0 = round precision,mode					#
-#									#
-# OUTPUT **************************************************************	#
-#	fp0 = log(X) or log(1+X)					#
-#									#
-# ACCURACY and MONOTONICITY *******************************************	#
-#	The returned result is within 2 ulps in 64 significant bit,	#
-#	i.e. within 0.5001 ulp to 53 bits if the result is subsequently	#
-#	rounded to double precision. The result is provably monotonic	#
-#	in double precision.						#
-#									#
-# ALGORITHM ***********************************************************	#
-#	LOGN:								#
-#	Step 1. If |X-1| < 1/16, approximate log(X) by an odd		#
-#		polynomial in u, where u = 2(X-1)/(X+1). Otherwise,	#
-#		move on to Step 2.					#
-#									#
-#	Step 2. X = 2**k * Y where 1 <= Y < 2. Define F to be the first	#
-#		seven significant bits of Y plus 2**(-7), i.e.		#
-#		F = 1.xxxxxx1 in base 2 where the six "x" match those	#
-#		of Y. Note that |Y-F| <= 2**(-7).			#
-#									#
-#	Step 3. Define u = (Y-F)/F. Approximate log(1+u) by a		#
-#		polynomial in u, log(1+u) = poly.			#
-#									#
-#	Step 4. Reconstruct						#
-#		log(X) = log( 2**k * Y ) = k*log(2) + log(F) + log(1+u)	#
-#		by k*log(2) + (log(F) + poly). The values of log(F) are	#
-#		calculated beforehand and stored in the program.	#
-#									#
-#	lognp1:								#
-#	Step 1: If |X| < 1/16, approximate log(1+X) by an odd		#
-#		polynomial in u where u = 2X/(2+X). Otherwise, move on	#
-#		to Step 2.						#
-#									#
-#	Step 2: Let 1+X = 2**k * Y, where 1 <= Y < 2. Define F as done	#
-#		in Step 2 of the algorithm for LOGN and compute		#
-#		log(1+X) as k*log(2) + log(F) + poly where poly		#
-#		approximates log(1+u), u = (Y-F)/F.			#
-#									#
-#	Implementation Notes:						#
-#	Note 1. There are 64 different possible values for F, thus 64	#
-#		log(F)'s need to be tabulated. Moreover, the values of	#
-#		1/F are also tabulated so that the division in (Y-F)/F	#
-#		can be performed by a multiplication.			#
-#									#
-#	Note 2. In Step 2 of lognp1, in order to preserved accuracy,	#
-#		the value Y-F has to be calculated carefully when	#
-#		1/2 <= X < 3/2.						#
-#									#
-#	Note 3. To fully exploit the pipeline, polynomials are usually	#
-#		separated into two parts evaluated independently before	#
-#		being added up.						#
-#									#
-#########################################################################
-LOGOF2:
-	long		0x3FFE0000,0xB17217F7,0xD1CF79AC,0x00000000
-
-one:
-	long		0x3F800000
-zero:
-	long		0x00000000
-infty:
-	long		0x7F800000
-negone:
-	long		0xBF800000
-
-LOGA6:
-	long		0x3FC2499A,0xB5E4040B
-LOGA5:
-	long		0xBFC555B5,0x848CB7DB
-
-LOGA4:
-	long		0x3FC99999,0x987D8730
-LOGA3:
-	long		0xBFCFFFFF,0xFF6F7E97
-
-LOGA2:
-	long		0x3FD55555,0x555555A4
-LOGA1:
-	long		0xBFE00000,0x00000008
-
-LOGB5:
-	long		0x3F175496,0xADD7DAD6
-LOGB4:
-	long		0x3F3C71C2,0xFE80C7E0
-
-LOGB3:
-	long		0x3F624924,0x928BCCFF
-LOGB2:
-	long		0x3F899999,0x999995EC
-
-LOGB1:
-	long		0x3FB55555,0x55555555
-TWO:
-	long		0x40000000,0x00000000
-
-LTHOLD:
-	long		0x3f990000,0x80000000,0x00000000,0x00000000
-
-LOGTBL:
-	long		0x3FFE0000,0xFE03F80F,0xE03F80FE,0x00000000
-	long		0x3FF70000,0xFF015358,0x833C47E2,0x00000000
-	long		0x3FFE0000,0xFA232CF2,0x52138AC0,0x00000000
-	long		0x3FF90000,0xBDC8D83E,0xAD88D549,0x00000000
-	long		0x3FFE0000,0xF6603D98,0x0F6603DA,0x00000000
-	long		0x3FFA0000,0x9CF43DCF,0xF5EAFD48,0x00000000
-	long		0x3FFE0000,0xF2B9D648,0x0F2B9D65,0x00000000
-	long		0x3FFA0000,0xDA16EB88,0xCB8DF614,0x00000000
-	long		0x3FFE0000,0xEF2EB71F,0xC4345238,0x00000000
-	long		0x3FFB0000,0x8B29B775,0x1BD70743,0x00000000
-	long		0x3FFE0000,0xEBBDB2A5,0xC1619C8C,0x00000000
-	long		0x3FFB0000,0xA8D839F8,0x30C1FB49,0x00000000
-	long		0x3FFE0000,0xE865AC7B,0x7603A197,0x00000000
-	long		0x3FFB0000,0xC61A2EB1,0x8CD907AD,0x00000000
-	long		0x3FFE0000,0xE525982A,0xF70C880E,0x00000000
-	long		0x3FFB0000,0xE2F2A47A,0xDE3A18AF,0x00000000
-	long		0x3FFE0000,0xE1FC780E,0x1FC780E2,0x00000000
-	long		0x3FFB0000,0xFF64898E,0xDF55D551,0x00000000
-	long		0x3FFE0000,0xDEE95C4C,0xA037BA57,0x00000000
-	long		0x3FFC0000,0x8DB956A9,0x7B3D0148,0x00000000
-	long		0x3FFE0000,0xDBEB61EE,0xD19C5958,0x00000000
-	long		0x3FFC0000,0x9B8FE100,0xF47BA1DE,0x00000000
-	long		0x3FFE0000,0xD901B203,0x6406C80E,0x00000000
-	long		0x3FFC0000,0xA9372F1D,0x0DA1BD17,0x00000000
-	long		0x3FFE0000,0xD62B80D6,0x2B80D62C,0x00000000
-	long		0x3FFC0000,0xB6B07F38,0xCE90E46B,0x00000000
-	long		0x3FFE0000,0xD3680D36,0x80D3680D,0x00000000
-	long		0x3FFC0000,0xC3FD0329,0x06488481,0x00000000
-	long		0x3FFE0000,0xD0B69FCB,0xD2580D0B,0x00000000
-	long		0x3FFC0000,0xD11DE0FF,0x15AB18CA,0x00000000
-	long		0x3FFE0000,0xCE168A77,0x25080CE1,0x00000000
-	long		0x3FFC0000,0xDE1433A1,0x6C66B150,0x00000000
-	long		0x3FFE0000,0xCB8727C0,0x65C393E0,0x00000000
-	long		0x3FFC0000,0xEAE10B5A,0x7DDC8ADD,0x00000000
-	long		0x3FFE0000,0xC907DA4E,0x871146AD,0x00000000
-	long		0x3FFC0000,0xF7856E5E,0xE2C9B291,0x00000000
-	long		0x3FFE0000,0xC6980C69,0x80C6980C,0x00000000
-	long		0x3FFD0000,0x82012CA5,0xA68206D7,0x00000000
-	long		0x3FFE0000,0xC4372F85,0x5D824CA6,0x00000000
-	long		0x3FFD0000,0x882C5FCD,0x7256A8C5,0x00000000
-	long		0x3FFE0000,0xC1E4BBD5,0x95F6E947,0x00000000
-	long		0x3FFD0000,0x8E44C60B,0x4CCFD7DE,0x00000000
-	long		0x3FFE0000,0xBFA02FE8,0x0BFA02FF,0x00000000
-	long		0x3FFD0000,0x944AD09E,0xF4351AF6,0x00000000
-	long		0x3FFE0000,0xBD691047,0x07661AA3,0x00000000
-	long		0x3FFD0000,0x9A3EECD4,0xC3EAA6B2,0x00000000
-	long		0x3FFE0000,0xBB3EE721,0xA54D880C,0x00000000
-	long		0x3FFD0000,0xA0218434,0x353F1DE8,0x00000000
-	long		0x3FFE0000,0xB92143FA,0x36F5E02E,0x00000000
-	long		0x3FFD0000,0xA5F2FCAB,0xBBC506DA,0x00000000
-	long		0x3FFE0000,0xB70FBB5A,0x19BE3659,0x00000000
-	long		0x3FFD0000,0xABB3B8BA,0x2AD362A5,0x00000000
-	long		0x3FFE0000,0xB509E68A,0x9B94821F,0x00000000
-	long		0x3FFD0000,0xB1641795,0xCE3CA97B,0x00000000
-	long		0x3FFE0000,0xB30F6352,0x8917C80B,0x00000000
-	long		0x3FFD0000,0xB7047551,0x5D0F1C61,0x00000000
-	long		0x3FFE0000,0xB11FD3B8,0x0B11FD3C,0x00000000
-	long		0x3FFD0000,0xBC952AFE,0xEA3D13E1,0x00000000
-	long		0x3FFE0000,0xAF3ADDC6,0x80AF3ADE,0x00000000
-	long		0x3FFD0000,0xC2168ED0,0xF458BA4A,0x00000000
-	long		0x3FFE0000,0xAD602B58,0x0AD602B6,0x00000000
-	long		0x3FFD0000,0xC788F439,0xB3163BF1,0x00000000
-	long		0x3FFE0000,0xAB8F69E2,0x8359CD11,0x00000000
-	long		0x3FFD0000,0xCCECAC08,0xBF04565D,0x00000000
-	long		0x3FFE0000,0xA9C84A47,0xA07F5638,0x00000000
-	long		0x3FFD0000,0xD2420487,0x2DD85160,0x00000000
-	long		0x3FFE0000,0xA80A80A8,0x0A80A80B,0x00000000
-	long		0x3FFD0000,0xD7894992,0x3BC3588A,0x00000000
-	long		0x3FFE0000,0xA655C439,0x2D7B73A8,0x00000000
-	long		0x3FFD0000,0xDCC2C4B4,0x9887DACC,0x00000000
-	long		0x3FFE0000,0xA4A9CF1D,0x96833751,0x00000000
-	long		0x3FFD0000,0xE1EEBD3E,0x6D6A6B9E,0x00000000
-	long		0x3FFE0000,0xA3065E3F,0xAE7CD0E0,0x00000000
-	long		0x3FFD0000,0xE70D785C,0x2F9F5BDC,0x00000000
-	long		0x3FFE0000,0xA16B312E,0xA8FC377D,0x00000000
-	long		0x3FFD0000,0xEC1F392C,0x5179F283,0x00000000
-	long		0x3FFE0000,0x9FD809FD,0x809FD80A,0x00000000
-	long		0x3FFD0000,0xF12440D3,0xE36130E6,0x00000000
-	long		0x3FFE0000,0x9E4CAD23,0xDD5F3A20,0x00000000
-	long		0x3FFD0000,0xF61CCE92,0x346600BB,0x00000000
-	long		0x3FFE0000,0x9CC8E160,0xC3FB19B9,0x00000000
-	long		0x3FFD0000,0xFB091FD3,0x8145630A,0x00000000
-	long		0x3FFE0000,0x9B4C6F9E,0xF03A3CAA,0x00000000
-	long		0x3FFD0000,0xFFE97042,0xBFA4C2AD,0x00000000
-	long		0x3FFE0000,0x99D722DA,0xBDE58F06,0x00000000
-	long		0x3FFE0000,0x825EFCED,0x49369330,0x00000000
-	long		0x3FFE0000,0x9868C809,0x868C8098,0x00000000
-	long		0x3FFE0000,0x84C37A7A,0xB9A905C9,0x00000000
-	long		0x3FFE0000,0x97012E02,0x5C04B809,0x00000000
-	long		0x3FFE0000,0x87224C2E,0x8E645FB7,0x00000000
-	long		0x3FFE0000,0x95A02568,0x095A0257,0x00000000
-	long		0x3FFE0000,0x897B8CAC,0x9F7DE298,0x00000000
-	long		0x3FFE0000,0x94458094,0x45809446,0x00000000
-	long		0x3FFE0000,0x8BCF55DE,0xC4CD05FE,0x00000000
-	long		0x3FFE0000,0x92F11384,0x0497889C,0x00000000
-	long		0x3FFE0000,0x8E1DC0FB,0x89E125E5,0x00000000
-	long		0x3FFE0000,0x91A2B3C4,0xD5E6F809,0x00000000
-	long		0x3FFE0000,0x9066E68C,0x955B6C9B,0x00000000
-	long		0x3FFE0000,0x905A3863,0x3E06C43B,0x00000000
-	long		0x3FFE0000,0x92AADE74,0xC7BE59E0,0x00000000
-	long		0x3FFE0000,0x8F1779D9,0xFDC3A219,0x00000000
-	long		0x3FFE0000,0x94E9BFF6,0x15845643,0x00000000
-	long		0x3FFE0000,0x8DDA5202,0x37694809,0x00000000
-	long		0x3FFE0000,0x9723A1B7,0x20134203,0x00000000
-	long		0x3FFE0000,0x8CA29C04,0x6514E023,0x00000000
-	long		0x3FFE0000,0x995899C8,0x90EB8990,0x00000000
-	long		0x3FFE0000,0x8B70344A,0x139BC75A,0x00000000
-	long		0x3FFE0000,0x9B88BDAA,0x3A3DAE2F,0x00000000
-	long		0x3FFE0000,0x8A42F870,0x5669DB46,0x00000000
-	long		0x3FFE0000,0x9DB4224F,0xFFE1157C,0x00000000
-	long		0x3FFE0000,0x891AC73A,0xE9819B50,0x00000000
-	long		0x3FFE0000,0x9FDADC26,0x8B7A12DA,0x00000000
-	long		0x3FFE0000,0x87F78087,0xF78087F8,0x00000000
-	long		0x3FFE0000,0xA1FCFF17,0xCE733BD4,0x00000000
-	long		0x3FFE0000,0x86D90544,0x7A34ACC6,0x00000000
-	long		0x3FFE0000,0xA41A9E8F,0x5446FB9F,0x00000000
-	long		0x3FFE0000,0x85BF3761,0x2CEE3C9B,0x00000000
-	long		0x3FFE0000,0xA633CD7E,0x6771CD8B,0x00000000
-	long		0x3FFE0000,0x84A9F9C8,0x084A9F9D,0x00000000
-	long		0x3FFE0000,0xA8489E60,0x0B435A5E,0x00000000
-	long		0x3FFE0000,0x83993052,0x3FBE3368,0x00000000
-	long		0x3FFE0000,0xAA59233C,0xCCA4BD49,0x00000000
-	long		0x3FFE0000,0x828CBFBE,0xB9A020A3,0x00000000
-	long		0x3FFE0000,0xAC656DAE,0x6BCC4985,0x00000000
-	long		0x3FFE0000,0x81848DA8,0xFAF0D277,0x00000000
-	long		0x3FFE0000,0xAE6D8EE3,0x60BB2468,0x00000000
-	long		0x3FFE0000,0x80808080,0x80808081,0x00000000
-	long		0x3FFE0000,0xB07197A2,0x3C46C654,0x00000000
-
-	set		ADJK,L_SCR1
-
-	set		X,FP_SCR0
-	set		XDCARE,X+2
-	set		XFRAC,X+4
-
-	set		F,FP_SCR1
-	set		FFRAC,F+4
-
-	set		KLOG2,FP_SCR0
-
-	set		SAVEU,FP_SCR0
-
-	global		slogn
-#--ENTRY POINT FOR LOG(X) FOR X FINITE, NON-ZERO, NOT NAN'S
-slogn:
-	fmov.x		(%a0),%fp0		# LOAD INPUT
-	mov.l		&0x00000000,ADJK(%a6)
-
-LOGBGN:
-#--FPCR SAVED AND CLEARED, INPUT IS 2^(ADJK)*FP0, FP0 CONTAINS
-#--A FINITE, NON-ZERO, NORMALIZED NUMBER.
-
-	mov.l		(%a0),%d1
-	mov.w		4(%a0),%d1
-
-	mov.l		(%a0),X(%a6)
-	mov.l		4(%a0),X+4(%a6)
-	mov.l		8(%a0),X+8(%a6)
-
-	cmp.l		%d1,&0			# CHECK IF X IS NEGATIVE
-	blt.w		LOGNEG			# LOG OF NEGATIVE ARGUMENT IS INVALID
-# X IS POSITIVE, CHECK IF X IS NEAR 1
-	cmp.l		%d1,&0x3ffef07d		# IS X < 15/16?
-	blt.b		LOGMAIN			# YES
-	cmp.l		%d1,&0x3fff8841		# IS X > 17/16?
-	ble.w		LOGNEAR1		# NO
-
-LOGMAIN:
-#--THIS SHOULD BE THE USUAL CASE, X NOT VERY CLOSE TO 1
-
-#--X = 2^(K) * Y, 1 <= Y < 2. THUS, Y = 1.XXXXXXXX....XX IN BINARY.
-#--WE DEFINE F = 1.XXXXXX1, I.E. FIRST 7 BITS OF Y AND ATTACH A 1.
-#--THE IDEA IS THAT LOG(X) = K*LOG2 + LOG(Y)
-#--			 = K*LOG2 + LOG(F) + LOG(1 + (Y-F)/F).
-#--NOTE THAT U = (Y-F)/F IS VERY SMALL AND THUS APPROXIMATING
-#--LOG(1+U) CAN BE VERY EFFICIENT.
-#--ALSO NOTE THAT THE VALUE 1/F IS STORED IN A TABLE SO THAT NO
-#--DIVISION IS NEEDED TO CALCULATE (Y-F)/F.
-
-#--GET K, Y, F, AND ADDRESS OF 1/F.
-	asr.l		&8,%d1
-	asr.l		&8,%d1			# SHIFTED 16 BITS, BIASED EXPO. OF X
-	sub.l		&0x3FFF,%d1		# THIS IS K
-	add.l		ADJK(%a6),%d1		# ADJUST K, ORIGINAL INPUT MAY BE  DENORM.
-	lea		LOGTBL(%pc),%a0		# BASE ADDRESS OF 1/F AND LOG(F)
-	fmov.l		%d1,%fp1		# CONVERT K TO FLOATING-POINT FORMAT
-
-#--WHILE THE CONVERSION IS GOING ON, WE GET F AND ADDRESS OF 1/F
-	mov.l		&0x3FFF0000,X(%a6)	# X IS NOW Y, I.E. 2^(-K)*X
-	mov.l		XFRAC(%a6),FFRAC(%a6)
-	and.l		&0xFE000000,FFRAC(%a6)	# FIRST 7 BITS OF Y
-	or.l		&0x01000000,FFRAC(%a6)	# GET F: ATTACH A 1 AT THE EIGHTH BIT
-	mov.l		FFRAC(%a6),%d1	# READY TO GET ADDRESS OF 1/F
-	and.l		&0x7E000000,%d1
-	asr.l		&8,%d1
-	asr.l		&8,%d1
-	asr.l		&4,%d1			# SHIFTED 20, D0 IS THE DISPLACEMENT
-	add.l		%d1,%a0			# A0 IS THE ADDRESS FOR 1/F
-
-	fmov.x		X(%a6),%fp0
-	mov.l		&0x3fff0000,F(%a6)
-	clr.l		F+8(%a6)
-	fsub.x		F(%a6),%fp0		# Y-F
-	fmovm.x		&0xc,-(%sp)		# SAVE FP2-3 WHILE FP0 IS NOT READY
-#--SUMMARY: FP0 IS Y-F, A0 IS ADDRESS OF 1/F, FP1 IS K
-#--REGISTERS SAVED: FPCR, FP1, FP2
-
-LP1CONT1:
-#--AN RE-ENTRY POINT FOR LOGNP1
-	fmul.x		(%a0),%fp0		# FP0 IS U = (Y-F)/F
-	fmul.x		LOGOF2(%pc),%fp1	# GET K*LOG2 WHILE FP0 IS NOT READY
-	fmov.x		%fp0,%fp2
-	fmul.x		%fp2,%fp2		# FP2 IS V=U*U
-	fmov.x		%fp1,KLOG2(%a6)		# PUT K*LOG2 IN MEMEORY, FREE FP1
-
-#--LOG(1+U) IS APPROXIMATED BY
-#--U + V*(A1+U*(A2+U*(A3+U*(A4+U*(A5+U*A6))))) WHICH IS
-#--[U + V*(A1+V*(A3+V*A5))]  +  [U*V*(A2+V*(A4+V*A6))]
-
-	fmov.x		%fp2,%fp3
-	fmov.x		%fp2,%fp1
-
-	fmul.d		LOGA6(%pc),%fp1		# V*A6
-	fmul.d		LOGA5(%pc),%fp2		# V*A5
-
-	fadd.d		LOGA4(%pc),%fp1		# A4+V*A6
-	fadd.d		LOGA3(%pc),%fp2		# A3+V*A5
-
-	fmul.x		%fp3,%fp1		# V*(A4+V*A6)
-	fmul.x		%fp3,%fp2		# V*(A3+V*A5)
-
-	fadd.d		LOGA2(%pc),%fp1		# A2+V*(A4+V*A6)
-	fadd.d		LOGA1(%pc),%fp2		# A1+V*(A3+V*A5)
-
-	fmul.x		%fp3,%fp1		# V*(A2+V*(A4+V*A6))
-	add.l		&16,%a0			# ADDRESS OF LOG(F)
-	fmul.x		%fp3,%fp2		# V*(A1+V*(A3+V*A5))
-
-	fmul.x		%fp0,%fp1		# U*V*(A2+V*(A4+V*A6))
-	fadd.x		%fp2,%fp0		# U+V*(A1+V*(A3+V*A5))
-
-	fadd.x		(%a0),%fp1		# LOG(F)+U*V*(A2+V*(A4+V*A6))
-	fmovm.x		(%sp)+,&0x30		# RESTORE FP2-3
-	fadd.x		%fp1,%fp0		# FP0 IS LOG(F) + LOG(1+U)
-
-	fmov.l		%d0,%fpcr
-	fadd.x		KLOG2(%a6),%fp0		# FINAL ADD
-	bra		t_inx2
-
-
-LOGNEAR1:
-
-# if the input is exactly equal to one, then exit through ld_pzero.
-# if these 2 lines weren't here, the correct answer would be returned
-# but the INEX2 bit would be set.
-	fcmp.b		%fp0,&0x1		# is it equal to one?
-	fbeq.l		ld_pzero		# yes
-
-#--REGISTERS SAVED: FPCR, FP1. FP0 CONTAINS THE INPUT.
-	fmov.x		%fp0,%fp1
-	fsub.s		one(%pc),%fp1		# FP1 IS X-1
-	fadd.s		one(%pc),%fp0		# FP0 IS X+1
-	fadd.x		%fp1,%fp1		# FP1 IS 2(X-1)
-#--LOG(X) = LOG(1+U/2)-LOG(1-U/2) WHICH IS AN ODD POLYNOMIAL
-#--IN U, U = 2(X-1)/(X+1) = FP1/FP0
-
-LP1CONT2:
-#--THIS IS AN RE-ENTRY POINT FOR LOGNP1
-	fdiv.x		%fp0,%fp1		# FP1 IS U
-	fmovm.x		&0xc,-(%sp)		# SAVE FP2-3
-#--REGISTERS SAVED ARE NOW FPCR,FP1,FP2,FP3
-#--LET V=U*U, W=V*V, CALCULATE
-#--U + U*V*(B1 + V*(B2 + V*(B3 + V*(B4 + V*B5)))) BY
-#--U + U*V*(  [B1 + W*(B3 + W*B5)]  +  [V*(B2 + W*B4)]  )
-	fmov.x		%fp1,%fp0
-	fmul.x		%fp0,%fp0		# FP0 IS V
-	fmov.x		%fp1,SAVEU(%a6)		# STORE U IN MEMORY, FREE FP1
-	fmov.x		%fp0,%fp1
-	fmul.x		%fp1,%fp1		# FP1 IS W
-
-	fmov.d		LOGB5(%pc),%fp3
-	fmov.d		LOGB4(%pc),%fp2
-
-	fmul.x		%fp1,%fp3		# W*B5
-	fmul.x		%fp1,%fp2		# W*B4
-
-	fadd.d		LOGB3(%pc),%fp3		# B3+W*B5
-	fadd.d		LOGB2(%pc),%fp2		# B2+W*B4
-
-	fmul.x		%fp3,%fp1		# W*(B3+W*B5), FP3 RELEASED
-
-	fmul.x		%fp0,%fp2		# V*(B2+W*B4)
-
-	fadd.d		LOGB1(%pc),%fp1		# B1+W*(B3+W*B5)
-	fmul.x		SAVEU(%a6),%fp0		# FP0 IS U*V
-
-	fadd.x		%fp2,%fp1		# B1+W*(B3+W*B5) + V*(B2+W*B4), FP2 RELEASED
-	fmovm.x		(%sp)+,&0x30		# FP2-3 RESTORED
-
-	fmul.x		%fp1,%fp0		# U*V*( [B1+W*(B3+W*B5)] + [V*(B2+W*B4)] )
-
-	fmov.l		%d0,%fpcr
-	fadd.x		SAVEU(%a6),%fp0
-	bra		t_inx2
-
-#--REGISTERS SAVED FPCR. LOG(-VE) IS INVALID
-LOGNEG:
-	bra		t_operr
-
-	global		slognd
-slognd:
-#--ENTRY POINT FOR LOG(X) FOR DENORMALIZED INPUT
-
-	mov.l		&-100,ADJK(%a6)		# INPUT = 2^(ADJK) * FP0
-
-#----normalize the input value by left shifting k bits (k to be determined
-#----below), adjusting exponent and storing -k to  ADJK
-#----the value TWOTO100 is no longer needed.
-#----Note that this code assumes the denormalized input is NON-ZERO.
-
-	movm.l		&0x3f00,-(%sp)		# save some registers  {d2-d7}
-	mov.l		(%a0),%d3		# D3 is exponent of smallest norm. #
-	mov.l		4(%a0),%d4
-	mov.l		8(%a0),%d5		# (D4,D5) is (Hi_X,Lo_X)
-	clr.l		%d2			# D2 used for holding K
-
-	tst.l		%d4
-	bne.b		Hi_not0
-
-Hi_0:
-	mov.l		%d5,%d4
-	clr.l		%d5
-	mov.l		&32,%d2
-	clr.l		%d6
-	bfffo		%d4{&0:&32},%d6
-	lsl.l		%d6,%d4
-	add.l		%d6,%d2			# (D3,D4,D5) is normalized
-
-	mov.l		%d3,X(%a6)
-	mov.l		%d4,XFRAC(%a6)
-	mov.l		%d5,XFRAC+4(%a6)
-	neg.l		%d2
-	mov.l		%d2,ADJK(%a6)
-	fmov.x		X(%a6),%fp0
-	movm.l		(%sp)+,&0xfc		# restore registers {d2-d7}
-	lea		X(%a6),%a0
-	bra.w		LOGBGN			# begin regular log(X)
-
-Hi_not0:
-	clr.l		%d6
-	bfffo		%d4{&0:&32},%d6		# find first 1
-	mov.l		%d6,%d2			# get k
-	lsl.l		%d6,%d4
-	mov.l		%d5,%d7			# a copy of D5
-	lsl.l		%d6,%d5
-	neg.l		%d6
-	add.l		&32,%d6
-	lsr.l		%d6,%d7
-	or.l		%d7,%d4			# (D3,D4,D5) normalized
-
-	mov.l		%d3,X(%a6)
-	mov.l		%d4,XFRAC(%a6)
-	mov.l		%d5,XFRAC+4(%a6)
-	neg.l		%d2
-	mov.l		%d2,ADJK(%a6)
-	fmov.x		X(%a6),%fp0
-	movm.l		(%sp)+,&0xfc		# restore registers {d2-d7}
-	lea		X(%a6),%a0
-	bra.w		LOGBGN			# begin regular log(X)
-
-	global		slognp1
-#--ENTRY POINT FOR LOG(1+X) FOR X FINITE, NON-ZERO, NOT NAN'S
-slognp1:
-	fmov.x		(%a0),%fp0		# LOAD INPUT
-	fabs.x		%fp0			# test magnitude
-	fcmp.x		%fp0,LTHOLD(%pc)	# compare with min threshold
-	fbgt.w		LP1REAL			# if greater, continue
-	fmov.l		%d0,%fpcr
-	mov.b		&FMOV_OP,%d1		# last inst is MOVE
-	fmov.x		(%a0),%fp0		# return signed argument
-	bra		t_catch
-
-LP1REAL:
-	fmov.x		(%a0),%fp0		# LOAD INPUT
-	mov.l		&0x00000000,ADJK(%a6)
-	fmov.x		%fp0,%fp1		# FP1 IS INPUT Z
-	fadd.s		one(%pc),%fp0		# X := ROUND(1+Z)
-	fmov.x		%fp0,X(%a6)
-	mov.w		XFRAC(%a6),XDCARE(%a6)
-	mov.l		X(%a6),%d1
-	cmp.l		%d1,&0
-	ble.w		LP1NEG0			# LOG OF ZERO OR -VE
-	cmp.l		%d1,&0x3ffe8000		# IS BOUNDS [1/2,3/2]?
-	blt.w		LOGMAIN
-	cmp.l		%d1,&0x3fffc000
-	bgt.w		LOGMAIN
-#--IF 1+Z > 3/2 OR 1+Z < 1/2, THEN X, WHICH IS ROUNDING 1+Z,
-#--CONTAINS AT LEAST 63 BITS OF INFORMATION OF Z. IN THAT CASE,
-#--SIMPLY INVOKE LOG(X) FOR LOG(1+Z).
-
-LP1NEAR1:
-#--NEXT SEE IF EXP(-1/16) < X < EXP(1/16)
-	cmp.l		%d1,&0x3ffef07d
-	blt.w		LP1CARE
-	cmp.l		%d1,&0x3fff8841
-	bgt.w		LP1CARE
-
-LP1ONE16:
-#--EXP(-1/16) < X < EXP(1/16). LOG(1+Z) = LOG(1+U/2) - LOG(1-U/2)
-#--WHERE U = 2Z/(2+Z) = 2Z/(1+X).
-	fadd.x		%fp1,%fp1		# FP1 IS 2Z
-	fadd.s		one(%pc),%fp0		# FP0 IS 1+X
-#--U = FP1/FP0
-	bra.w		LP1CONT2
-
-LP1CARE:
-#--HERE WE USE THE USUAL TABLE DRIVEN APPROACH. CARE HAS TO BE
-#--TAKEN BECAUSE 1+Z CAN HAVE 67 BITS OF INFORMATION AND WE MUST
-#--PRESERVE ALL THE INFORMATION. BECAUSE 1+Z IS IN [1/2,3/2],
-#--THERE ARE ONLY TWO CASES.
-#--CASE 1: 1+Z < 1, THEN K = -1 AND Y-F = (2-F) + 2Z
-#--CASE 2: 1+Z > 1, THEN K = 0  AND Y-F = (1-F) + Z
-#--ON RETURNING TO LP1CONT1, WE MUST HAVE K IN FP1, ADDRESS OF
-#--(1/F) IN A0, Y-F IN FP0, AND FP2 SAVED.
-
-	mov.l		XFRAC(%a6),FFRAC(%a6)
-	and.l		&0xFE000000,FFRAC(%a6)
-	or.l		&0x01000000,FFRAC(%a6)	# F OBTAINED
-	cmp.l		%d1,&0x3FFF8000		# SEE IF 1+Z > 1
-	bge.b		KISZERO
-
-KISNEG1:
-	fmov.s		TWO(%pc),%fp0
-	mov.l		&0x3fff0000,F(%a6)
-	clr.l		F+8(%a6)
-	fsub.x		F(%a6),%fp0		# 2-F
-	mov.l		FFRAC(%a6),%d1
-	and.l		&0x7E000000,%d1
-	asr.l		&8,%d1
-	asr.l		&8,%d1
-	asr.l		&4,%d1			# D0 CONTAINS DISPLACEMENT FOR 1/F
-	fadd.x		%fp1,%fp1		# GET 2Z
-	fmovm.x		&0xc,-(%sp)		# SAVE FP2  {%fp2/%fp3}
-	fadd.x		%fp1,%fp0		# FP0 IS Y-F = (2-F)+2Z
-	lea		LOGTBL(%pc),%a0		# A0 IS ADDRESS OF 1/F
-	add.l		%d1,%a0
-	fmov.s		negone(%pc),%fp1	# FP1 IS K = -1
-	bra.w		LP1CONT1
-
-KISZERO:
-	fmov.s		one(%pc),%fp0
-	mov.l		&0x3fff0000,F(%a6)
-	clr.l		F+8(%a6)
-	fsub.x		F(%a6),%fp0		# 1-F
-	mov.l		FFRAC(%a6),%d1
-	and.l		&0x7E000000,%d1
-	asr.l		&8,%d1
-	asr.l		&8,%d1
-	asr.l		&4,%d1
-	fadd.x		%fp1,%fp0		# FP0 IS Y-F
-	fmovm.x		&0xc,-(%sp)		# FP2 SAVED {%fp2/%fp3}
-	lea		LOGTBL(%pc),%a0
-	add.l		%d1,%a0			# A0 IS ADDRESS OF 1/F
-	fmov.s		zero(%pc),%fp1		# FP1 IS K = 0
-	bra.w		LP1CONT1
-
-LP1NEG0:
-#--FPCR SAVED. D0 IS X IN COMPACT FORM.
-	cmp.l		%d1,&0
-	blt.b		LP1NEG
-LP1ZERO:
-	fmov.s		negone(%pc),%fp0
-
-	fmov.l		%d0,%fpcr
-	bra		t_dz
-
-LP1NEG:
-	fmov.s		zero(%pc),%fp0
-
-	fmov.l		%d0,%fpcr
-	bra		t_operr
-
-	global		slognp1d
-#--ENTRY POINT FOR LOG(1+Z) FOR DENORMALIZED INPUT
-# Simply return the denorm
-slognp1d:
-	bra		t_extdnrm
-
-#########################################################################
-# satanh():  computes the inverse hyperbolic tangent of a norm input	#
-# satanhd(): computes the inverse hyperbolic tangent of a denorm input	#
-#									#
-# INPUT ***************************************************************	#
-#	a0 = pointer to extended precision input			#
-#	d0 = round precision,mode					#
-#									#
-# OUTPUT **************************************************************	#
-#	fp0 = arctanh(X)						#
-#									#
-# ACCURACY and MONOTONICITY *******************************************	#
-#	The returned result is within 3 ulps in	64 significant bit,	#
-#	i.e. within 0.5001 ulp to 53 bits if the result is subsequently	#
-#	rounded to double precision. The result is provably monotonic	#
-#	in double precision.						#
-#									#
-# ALGORITHM ***********************************************************	#
-#									#
-#	ATANH								#
-#	1. If |X| >= 1, go to 3.					#
-#									#
-#	2. (|X| < 1) Calculate atanh(X) by				#
-#		sgn := sign(X)						#
-#		y := |X|						#
-#		z := 2y/(1-y)						#
-#		atanh(X) := sgn * (1/2) * logp1(z)			#
-#		Exit.							#
-#									#
-#	3. If |X| > 1, go to 5.						#
-#									#
-#	4. (|X| = 1) Generate infinity with an appropriate sign and	#
-#		divide-by-zero by					#
-#		sgn := sign(X)						#
-#		atan(X) := sgn / (+0).					#
-#		Exit.							#
-#									#
-#	5. (|X| > 1) Generate an invalid operation by 0 * infinity.	#
-#		Exit.							#
-#									#
-#########################################################################
-
-	global		satanh
-satanh:
-	mov.l		(%a0),%d1
-	mov.w		4(%a0),%d1
-	and.l		&0x7FFFFFFF,%d1
-	cmp.l		%d1,&0x3FFF8000
-	bge.b		ATANHBIG
-
-#--THIS IS THE USUAL CASE, |X| < 1
-#--Y = |X|, Z = 2Y/(1-Y), ATANH(X) = SIGN(X) * (1/2) * LOG1P(Z).
-
-	fabs.x		(%a0),%fp0		# Y = |X|
-	fmov.x		%fp0,%fp1
-	fneg.x		%fp1			# -Y
-	fadd.x		%fp0,%fp0		# 2Y
-	fadd.s		&0x3F800000,%fp1	# 1-Y
-	fdiv.x		%fp1,%fp0		# 2Y/(1-Y)
-	mov.l		(%a0),%d1
-	and.l		&0x80000000,%d1
-	or.l		&0x3F000000,%d1		# SIGN(X)*HALF
-	mov.l		%d1,-(%sp)
-
-	mov.l		%d0,-(%sp)		# save rnd prec,mode
-	clr.l		%d0			# pass ext prec,RN
-	fmovm.x		&0x01,-(%sp)		# save Z on stack
-	lea		(%sp),%a0		# pass ptr to Z
-	bsr		slognp1			# LOG1P(Z)
-	add.l		&0xc,%sp		# clear Z from stack
-
-	mov.l		(%sp)+,%d0		# fetch old prec,mode
-	fmov.l		%d0,%fpcr		# load it
-	mov.b		&FMUL_OP,%d1		# last inst is MUL
-	fmul.s		(%sp)+,%fp0
-	bra		t_catch
-
-ATANHBIG:
-	fabs.x		(%a0),%fp0		# |X|
-	fcmp.s		%fp0,&0x3F800000
-	fbgt		t_operr
-	bra		t_dz
-
-	global		satanhd
-#--ATANH(X) = X FOR DENORMALIZED X
-satanhd:
-	bra		t_extdnrm
-
-#########################################################################
-# slog10():  computes the base-10 logarithm of a normalized input	#
-# slog10d(): computes the base-10 logarithm of a denormalized input	#
-# slog2():   computes the base-2 logarithm of a normalized input	#
-# slog2d():  computes the base-2 logarithm of a denormalized input	#
-#									#
-# INPUT *************************************************************** #
-#	a0 = pointer to extended precision input			#
-#	d0 = round precision,mode					#
-#									#
-# OUTPUT **************************************************************	#
-#	fp0 = log_10(X) or log_2(X)					#
-#									#
-# ACCURACY and MONOTONICITY *******************************************	#
-#	The returned result is within 1.7 ulps in 64 significant bit,	#
-#	i.e. within 0.5003 ulp to 53 bits if the result is subsequently	#
-#	rounded to double precision. The result is provably monotonic	#
-#	in double precision.						#
-#									#
-# ALGORITHM ***********************************************************	#
-#									#
-#       slog10d:							#
-#									#
-#       Step 0.	If X < 0, create a NaN and raise the invalid operation	#
-#               flag. Otherwise, save FPCR in D1; set FpCR to default.	#
-#       Notes:  Default means round-to-nearest mode, no floating-point	#
-#               traps, and precision control = double extended.		#
-#									#
-#       Step 1. Call slognd to obtain Y = log(X), the natural log of X.	#
-#       Notes:  Even if X is denormalized, log(X) is always normalized.	#
-#									#
-#       Step 2.  Compute log_10(X) = log(X) * (1/log(10)).		#
-#            2.1 Restore the user FPCR					#
-#            2.2 Return ans := Y * INV_L10.				#
-#									#
-#       slog10:								#
-#									#
-#       Step 0. If X < 0, create a NaN and raise the invalid operation	#
-#               flag. Otherwise, save FPCR in D1; set FpCR to default.	#
-#       Notes:  Default means round-to-nearest mode, no floating-point	#
-#               traps, and precision control = double extended.		#
-#									#
-#       Step 1. Call sLogN to obtain Y = log(X), the natural log of X.	#
-#									#
-#       Step 2.   Compute log_10(X) = log(X) * (1/log(10)).		#
-#            2.1  Restore the user FPCR					#
-#            2.2  Return ans := Y * INV_L10.				#
-#									#
-#       sLog2d:								#
-#									#
-#       Step 0. If X < 0, create a NaN and raise the invalid operation	#
-#               flag. Otherwise, save FPCR in D1; set FpCR to default.	#
-#       Notes:  Default means round-to-nearest mode, no floating-point	#
-#               traps, and precision control = double extended.		#
-#									#
-#       Step 1. Call slognd to obtain Y = log(X), the natural log of X.	#
-#       Notes:  Even if X is denormalized, log(X) is always normalized.	#
-#									#
-#       Step 2.   Compute log_10(X) = log(X) * (1/log(2)).		#
-#            2.1  Restore the user FPCR					#
-#            2.2  Return ans := Y * INV_L2.				#
-#									#
-#       sLog2:								#
-#									#
-#       Step 0. If X < 0, create a NaN and raise the invalid operation	#
-#               flag. Otherwise, save FPCR in D1; set FpCR to default.	#
-#       Notes:  Default means round-to-nearest mode, no floating-point	#
-#               traps, and precision control = double extended.		#
-#									#
-#       Step 1. If X is not an integer power of two, i.e., X != 2^k,	#
-#               go to Step 3.						#
-#									#
-#       Step 2.   Return k.						#
-#            2.1  Get integer k, X = 2^k.				#
-#            2.2  Restore the user FPCR.				#
-#            2.3  Return ans := convert-to-double-extended(k).		#
-#									#
-#       Step 3. Call sLogN to obtain Y = log(X), the natural log of X.	#
-#									#
-#       Step 4.   Compute log_2(X) = log(X) * (1/log(2)).		#
-#            4.1  Restore the user FPCR					#
-#            4.2  Return ans := Y * INV_L2.				#
-#									#
-#########################################################################
-
-INV_L10:
-	long		0x3FFD0000,0xDE5BD8A9,0x37287195,0x00000000
-
-INV_L2:
-	long		0x3FFF0000,0xB8AA3B29,0x5C17F0BC,0x00000000
-
-	global		slog10
-#--entry point for Log10(X), X is normalized
-slog10:
-	fmov.b		&0x1,%fp0
-	fcmp.x		%fp0,(%a0)		# if operand == 1,
-	fbeq.l		ld_pzero		# return an EXACT zero
-
-	mov.l		(%a0),%d1
-	blt.w		invalid
-	mov.l		%d0,-(%sp)
-	clr.l		%d0
-	bsr		slogn			# log(X), X normal.
-	fmov.l		(%sp)+,%fpcr
-	fmul.x		INV_L10(%pc),%fp0
-	bra		t_inx2
-
-	global		slog10d
-#--entry point for Log10(X), X is denormalized
-slog10d:
-	mov.l		(%a0),%d1
-	blt.w		invalid
-	mov.l		%d0,-(%sp)
-	clr.l		%d0
-	bsr		slognd			# log(X), X denorm.
-	fmov.l		(%sp)+,%fpcr
-	fmul.x		INV_L10(%pc),%fp0
-	bra		t_minx2
-
-	global		slog2
-#--entry point for Log2(X), X is normalized
-slog2:
-	mov.l		(%a0),%d1
-	blt.w		invalid
-
-	mov.l		8(%a0),%d1
-	bne.b		continue		# X is not 2^k
-
-	mov.l		4(%a0),%d1
-	and.l		&0x7FFFFFFF,%d1
-	bne.b		continue
-
-#--X = 2^k.
-	mov.w		(%a0),%d1
-	and.l		&0x00007FFF,%d1
-	sub.l		&0x3FFF,%d1
-	beq.l		ld_pzero
-	fmov.l		%d0,%fpcr
-	fmov.l		%d1,%fp0
-	bra		t_inx2
-
-continue:
-	mov.l		%d0,-(%sp)
-	clr.l		%d0
-	bsr		slogn			# log(X), X normal.
-	fmov.l		(%sp)+,%fpcr
-	fmul.x		INV_L2(%pc),%fp0
-	bra		t_inx2
-
-invalid:
-	bra		t_operr
-
-	global		slog2d
-#--entry point for Log2(X), X is denormalized
-slog2d:
-	mov.l		(%a0),%d1
-	blt.w		invalid
-	mov.l		%d0,-(%sp)
-	clr.l		%d0
-	bsr		slognd			# log(X), X denorm.
-	fmov.l		(%sp)+,%fpcr
-	fmul.x		INV_L2(%pc),%fp0
-	bra		t_minx2
-
-#########################################################################
-# stwotox():  computes 2**X for a normalized input			#
-# stwotoxd(): computes 2**X for a denormalized input			#
-# stentox():  computes 10**X for a normalized input			#
-# stentoxd(): computes 10**X for a denormalized input			#
-#									#
-# INPUT ***************************************************************	#
-#	a0 = pointer to extended precision input			#
-#	d0 = round precision,mode					#
-#									#
-# OUTPUT **************************************************************	#
-#	fp0 = 2**X or 10**X						#
-#									#
-# ACCURACY and MONOTONICITY *******************************************	#
-#	The returned result is within 2 ulps in 64 significant bit,	#
-#	i.e. within 0.5001 ulp to 53 bits if the result is subsequently	#
-#	rounded to double precision. The result is provably monotonic	#
-#	in double precision.						#
-#									#
-# ALGORITHM ***********************************************************	#
-#									#
-#	twotox								#
-#	1. If |X| > 16480, go to ExpBig.				#
-#									#
-#	2. If |X| < 2**(-70), go to ExpSm.				#
-#									#
-#	3. Decompose X as X = N/64 + r where |r| <= 1/128. Furthermore	#
-#		decompose N as						#
-#		 N = 64(M + M') + j,  j = 0,1,2,...,63.			#
-#									#
-#	4. Overwrite r := r * log2. Then				#
-#		2**X = 2**(M') * 2**(M) * 2**(j/64) * exp(r).		#
-#		Go to expr to compute that expression.			#
-#									#
-#	tentox								#
-#	1. If |X| > 16480*log_10(2) (base 10 log of 2), go to ExpBig.	#
-#									#
-#	2. If |X| < 2**(-70), go to ExpSm.				#
-#									#
-#	3. Set y := X*log_2(10)*64 (base 2 log of 10). Set		#
-#		N := round-to-int(y). Decompose N as			#
-#		 N = 64(M + M') + j,  j = 0,1,2,...,63.			#
-#									#
-#	4. Define r as							#
-#		r := ((X - N*L1)-N*L2) * L10				#
-#		where L1, L2 are the leading and trailing parts of	#
-#		log_10(2)/64 and L10 is the natural log of 10. Then	#
-#		10**X = 2**(M') * 2**(M) * 2**(j/64) * exp(r).		#
-#		Go to expr to compute that expression.			#
-#									#
-#	expr								#
-#	1. Fetch 2**(j/64) from table as Fact1 and Fact2.		#
-#									#
-#	2. Overwrite Fact1 and Fact2 by					#
-#		Fact1 := 2**(M) * Fact1					#
-#		Fact2 := 2**(M) * Fact2					#
-#		Thus Fact1 + Fact2 = 2**(M) * 2**(j/64).		#
-#									#
-#	3. Calculate P where 1 + P approximates exp(r):			#
-#		P = r + r*r*(A1+r*(A2+...+r*A5)).			#
-#									#
-#	4. Let AdjFact := 2**(M'). Return				#
-#		AdjFact * ( Fact1 + ((Fact1*P) + Fact2) ).		#
-#		Exit.							#
-#									#
-#	ExpBig								#
-#	1. Generate overflow by Huge * Huge if X > 0; otherwise,	#
-#	        generate underflow by Tiny * Tiny.			#
-#									#
-#	ExpSm								#
-#	1. Return 1 + X.						#
-#									#
-#########################################################################
-
-L2TEN64:
-	long		0x406A934F,0x0979A371	# 64LOG10/LOG2
-L10TWO1:
-	long		0x3F734413,0x509F8000	# LOG2/64LOG10
-
-L10TWO2:
-	long		0xBFCD0000,0xC0219DC1,0xDA994FD2,0x00000000
-
-LOG10:	long		0x40000000,0x935D8DDD,0xAAA8AC17,0x00000000
-
-LOG2:	long		0x3FFE0000,0xB17217F7,0xD1CF79AC,0x00000000
-
-EXPA5:	long		0x3F56C16D,0x6F7BD0B2
-EXPA4:	long		0x3F811112,0x302C712C
-EXPA3:	long		0x3FA55555,0x55554CC1
-EXPA2:	long		0x3FC55555,0x55554A54
-EXPA1:	long		0x3FE00000,0x00000000,0x00000000,0x00000000
-
-TEXPTBL:
-	long		0x3FFF0000,0x80000000,0x00000000,0x3F738000
-	long		0x3FFF0000,0x8164D1F3,0xBC030773,0x3FBEF7CA
-	long		0x3FFF0000,0x82CD8698,0xAC2BA1D7,0x3FBDF8A9
-	long		0x3FFF0000,0x843A28C3,0xACDE4046,0x3FBCD7C9
-	long		0x3FFF0000,0x85AAC367,0xCC487B15,0xBFBDE8DA
-	long		0x3FFF0000,0x871F6196,0x9E8D1010,0x3FBDE85C
-	long		0x3FFF0000,0x88980E80,0x92DA8527,0x3FBEBBF1
-	long		0x3FFF0000,0x8A14D575,0x496EFD9A,0x3FBB80CA
-	long		0x3FFF0000,0x8B95C1E3,0xEA8BD6E7,0xBFBA8373
-	long		0x3FFF0000,0x8D1ADF5B,0x7E5BA9E6,0xBFBE9670
-	long		0x3FFF0000,0x8EA4398B,0x45CD53C0,0x3FBDB700
-	long		0x3FFF0000,0x9031DC43,0x1466B1DC,0x3FBEEEB0
-	long		0x3FFF0000,0x91C3D373,0xAB11C336,0x3FBBFD6D
-	long		0x3FFF0000,0x935A2B2F,0x13E6E92C,0xBFBDB319
-	long		0x3FFF0000,0x94F4EFA8,0xFEF70961,0x3FBDBA2B
-	long		0x3FFF0000,0x96942D37,0x20185A00,0x3FBE91D5
-	long		0x3FFF0000,0x9837F051,0x8DB8A96F,0x3FBE8D5A
-	long		0x3FFF0000,0x99E04593,0x20B7FA65,0xBFBCDE7B
-	long		0x3FFF0000,0x9B8D39B9,0xD54E5539,0xBFBEBAAF
-	long		0x3FFF0000,0x9D3ED9A7,0x2CFFB751,0xBFBD86DA
-	long		0x3FFF0000,0x9EF53260,0x91A111AE,0xBFBEBEDD
-	long		0x3FFF0000,0xA0B0510F,0xB9714FC2,0x3FBCC96E
-	long		0x3FFF0000,0xA2704303,0x0C496819,0xBFBEC90B
-	long		0x3FFF0000,0xA43515AE,0x09E6809E,0x3FBBD1DB
-	long		0x3FFF0000,0xA5FED6A9,0xB15138EA,0x3FBCE5EB
-	long		0x3FFF0000,0xA7CD93B4,0xE965356A,0xBFBEC274
-	long		0x3FFF0000,0xA9A15AB4,0xEA7C0EF8,0x3FBEA83C
-	long		0x3FFF0000,0xAB7A39B5,0xA93ED337,0x3FBECB00
-	long		0x3FFF0000,0xAD583EEA,0x42A14AC6,0x3FBE9301
-	long		0x3FFF0000,0xAF3B78AD,0x690A4375,0xBFBD8367
-	long		0x3FFF0000,0xB123F581,0xD2AC2590,0xBFBEF05F
-	long		0x3FFF0000,0xB311C412,0xA9112489,0x3FBDFB3C
-	long		0x3FFF0000,0xB504F333,0xF9DE6484,0x3FBEB2FB
-	long		0x3FFF0000,0xB6FD91E3,0x28D17791,0x3FBAE2CB
-	long		0x3FFF0000,0xB8FBAF47,0x62FB9EE9,0x3FBCDC3C
-	long		0x3FFF0000,0xBAFF5AB2,0x133E45FB,0x3FBEE9AA
-	long		0x3FFF0000,0xBD08A39F,0x580C36BF,0xBFBEAEFD
-	long		0x3FFF0000,0xBF1799B6,0x7A731083,0xBFBCBF51
-	long		0x3FFF0000,0xC12C4CCA,0x66709456,0x3FBEF88A
-	long		0x3FFF0000,0xC346CCDA,0x24976407,0x3FBD83B2
-	long		0x3FFF0000,0xC5672A11,0x5506DADD,0x3FBDF8AB
-	long		0x3FFF0000,0xC78D74C8,0xABB9B15D,0xBFBDFB17
-	long		0x3FFF0000,0xC9B9BD86,0x6E2F27A3,0xBFBEFE3C
-	long		0x3FFF0000,0xCBEC14FE,0xF2727C5D,0xBFBBB6F8
-	long		0x3FFF0000,0xCE248C15,0x1F8480E4,0xBFBCEE53
-	long		0x3FFF0000,0xD06333DA,0xEF2B2595,0xBFBDA4AE
-	long		0x3FFF0000,0xD2A81D91,0xF12AE45A,0x3FBC9124
-	long		0x3FFF0000,0xD4F35AAB,0xCFEDFA1F,0x3FBEB243
-	long		0x3FFF0000,0xD744FCCA,0xD69D6AF4,0x3FBDE69A
-	long		0x3FFF0000,0xD99D15C2,0x78AFD7B6,0xBFB8BC61
-	long		0x3FFF0000,0xDBFBB797,0xDAF23755,0x3FBDF610
-	long		0x3FFF0000,0xDE60F482,0x5E0E9124,0xBFBD8BE1
-	long		0x3FFF0000,0xE0CCDEEC,0x2A94E111,0x3FBACB12
-	long		0x3FFF0000,0xE33F8972,0xBE8A5A51,0x3FBB9BFE
-	long		0x3FFF0000,0xE5B906E7,0x7C8348A8,0x3FBCF2F4
-	long		0x3FFF0000,0xE8396A50,0x3C4BDC68,0x3FBEF22F
-	long		0x3FFF0000,0xEAC0C6E7,0xDD24392F,0xBFBDBF4A
-	long		0x3FFF0000,0xED4F301E,0xD9942B84,0x3FBEC01A
-	long		0x3FFF0000,0xEFE4B99B,0xDCDAF5CB,0x3FBE8CAC
-	long		0x3FFF0000,0xF281773C,0x59FFB13A,0xBFBCBB3F
-	long		0x3FFF0000,0xF5257D15,0x2486CC2C,0x3FBEF73A
-	long		0x3FFF0000,0xF7D0DF73,0x0AD13BB9,0xBFB8B795
-	long		0x3FFF0000,0xFA83B2DB,0x722A033A,0x3FBEF84B
-	long		0x3FFF0000,0xFD3E0C0C,0xF486C175,0xBFBEF581
-
-	set		INT,L_SCR1
-
-	set		X,FP_SCR0
-	set		XDCARE,X+2
-	set		XFRAC,X+4
-
-	set		ADJFACT,FP_SCR0
-
-	set		FACT1,FP_SCR0
-	set		FACT1HI,FACT1+4
-	set		FACT1LOW,FACT1+8
-
-	set		FACT2,FP_SCR1
-	set		FACT2HI,FACT2+4
-	set		FACT2LOW,FACT2+8
-
-	global		stwotox
-#--ENTRY POINT FOR 2**(X), HERE X IS FINITE, NON-ZERO, AND NOT NAN'S
-stwotox:
-	fmovm.x		(%a0),&0x80		# LOAD INPUT
-
-	mov.l		(%a0),%d1
-	mov.w		4(%a0),%d1
-	fmov.x		%fp0,X(%a6)
-	and.l		&0x7FFFFFFF,%d1
-
-	cmp.l		%d1,&0x3FB98000		# |X| >= 2**(-70)?
-	bge.b		TWOOK1
-	bra.w		EXPBORS
-
-TWOOK1:
-	cmp.l		%d1,&0x400D80C0		# |X| > 16480?
-	ble.b		TWOMAIN
-	bra.w		EXPBORS
-
-TWOMAIN:
-#--USUAL CASE, 2^(-70) <= |X| <= 16480
-
-	fmov.x		%fp0,%fp1
-	fmul.s		&0x42800000,%fp1	# 64 * X
-	fmov.l		%fp1,INT(%a6)		# N = ROUND-TO-INT(64 X)
-	mov.l		%d2,-(%sp)
-	lea		TEXPTBL(%pc),%a1	# LOAD ADDRESS OF TABLE OF 2^(J/64)
-	fmov.l		INT(%a6),%fp1		# N --> FLOATING FMT
-	mov.l		INT(%a6),%d1
-	mov.l		%d1,%d2
-	and.l		&0x3F,%d1		# D0 IS J
-	asl.l		&4,%d1			# DISPLACEMENT FOR 2^(J/64)
-	add.l		%d1,%a1			# ADDRESS FOR 2^(J/64)
-	asr.l		&6,%d2			# d2 IS L, N = 64L + J
-	mov.l		%d2,%d1
-	asr.l		&1,%d1			# D0 IS M
-	sub.l		%d1,%d2			# d2 IS M', N = 64(M+M') + J
-	add.l		&0x3FFF,%d2
-
-#--SUMMARY: a1 IS ADDRESS FOR THE LEADING PORTION OF 2^(J/64),
-#--D0 IS M WHERE N = 64(M+M') + J. NOTE THAT |M| <= 16140 BY DESIGN.
-#--ADJFACT = 2^(M').
-#--REGISTERS SAVED SO FAR ARE (IN ORDER) FPCR, D0, FP1, a1, AND FP2.
-
-	fmovm.x		&0x0c,-(%sp)		# save fp2/fp3
-
-	fmul.s		&0x3C800000,%fp1	# (1/64)*N
-	mov.l		(%a1)+,FACT1(%a6)
-	mov.l		(%a1)+,FACT1HI(%a6)
-	mov.l		(%a1)+,FACT1LOW(%a6)
-	mov.w		(%a1)+,FACT2(%a6)
-
-	fsub.x		%fp1,%fp0		# X - (1/64)*INT(64 X)
-
-	mov.w		(%a1)+,FACT2HI(%a6)
-	clr.w		FACT2HI+2(%a6)
-	clr.l		FACT2LOW(%a6)
-	add.w		%d1,FACT1(%a6)
-	fmul.x		LOG2(%pc),%fp0		# FP0 IS R
-	add.w		%d1,FACT2(%a6)
-
-	bra.w		expr
-
-EXPBORS:
-#--FPCR, D0 SAVED
-	cmp.l		%d1,&0x3FFF8000
-	bgt.b		TEXPBIG
-
-#--|X| IS SMALL, RETURN 1 + X
-
-	fmov.l		%d0,%fpcr		# restore users round prec,mode
-	fadd.s		&0x3F800000,%fp0	# RETURN 1 + X
-	bra		t_pinx2
-
-TEXPBIG:
-#--|X| IS LARGE, GENERATE OVERFLOW IF X > 0; ELSE GENERATE UNDERFLOW
-#--REGISTERS SAVE SO FAR ARE FPCR AND  D0
-	mov.l		X(%a6),%d1
-	cmp.l		%d1,&0
-	blt.b		EXPNEG
-
-	bra		t_ovfl2			# t_ovfl expects positive value
-
-EXPNEG:
-	bra		t_unfl2			# t_unfl expects positive value
-
-	global		stwotoxd
-stwotoxd:
-#--ENTRY POINT FOR 2**(X) FOR DENORMALIZED ARGUMENT
-
-	fmov.l		%d0,%fpcr		# set user's rounding mode/precision
-	fmov.s		&0x3F800000,%fp0	# RETURN 1 + X
-	mov.l		(%a0),%d1
-	or.l		&0x00800001,%d1
-	fadd.s		%d1,%fp0
-	bra		t_pinx2
-
-	global		stentox
-#--ENTRY POINT FOR 10**(X), HERE X IS FINITE, NON-ZERO, AND NOT NAN'S
-stentox:
-	fmovm.x		(%a0),&0x80		# LOAD INPUT
-
-	mov.l		(%a0),%d1
-	mov.w		4(%a0),%d1
-	fmov.x		%fp0,X(%a6)
-	and.l		&0x7FFFFFFF,%d1
-
-	cmp.l		%d1,&0x3FB98000		# |X| >= 2**(-70)?
-	bge.b		TENOK1
-	bra.w		EXPBORS
-
-TENOK1:
-	cmp.l		%d1,&0x400B9B07		# |X| <= 16480*log2/log10 ?
-	ble.b		TENMAIN
-	bra.w		EXPBORS
-
-TENMAIN:
-#--USUAL CASE, 2^(-70) <= |X| <= 16480 LOG 2 / LOG 10
-
-	fmov.x		%fp0,%fp1
-	fmul.d		L2TEN64(%pc),%fp1	# X*64*LOG10/LOG2
-	fmov.l		%fp1,INT(%a6)		# N=INT(X*64*LOG10/LOG2)
-	mov.l		%d2,-(%sp)
-	lea		TEXPTBL(%pc),%a1	# LOAD ADDRESS OF TABLE OF 2^(J/64)
-	fmov.l		INT(%a6),%fp1		# N --> FLOATING FMT
-	mov.l		INT(%a6),%d1
-	mov.l		%d1,%d2
-	and.l		&0x3F,%d1		# D0 IS J
-	asl.l		&4,%d1			# DISPLACEMENT FOR 2^(J/64)
-	add.l		%d1,%a1			# ADDRESS FOR 2^(J/64)
-	asr.l		&6,%d2			# d2 IS L, N = 64L + J
-	mov.l		%d2,%d1
-	asr.l		&1,%d1			# D0 IS M
-	sub.l		%d1,%d2			# d2 IS M', N = 64(M+M') + J
-	add.l		&0x3FFF,%d2
-
-#--SUMMARY: a1 IS ADDRESS FOR THE LEADING PORTION OF 2^(J/64),
-#--D0 IS M WHERE N = 64(M+M') + J. NOTE THAT |M| <= 16140 BY DESIGN.
-#--ADJFACT = 2^(M').
-#--REGISTERS SAVED SO FAR ARE (IN ORDER) FPCR, D0, FP1, a1, AND FP2.
-	fmovm.x		&0x0c,-(%sp)		# save fp2/fp3
-
-	fmov.x		%fp1,%fp2
-
-	fmul.d		L10TWO1(%pc),%fp1	# N*(LOG2/64LOG10)_LEAD
-	mov.l		(%a1)+,FACT1(%a6)
-
-	fmul.x		L10TWO2(%pc),%fp2	# N*(LOG2/64LOG10)_TRAIL
-
-	mov.l		(%a1)+,FACT1HI(%a6)
-	mov.l		(%a1)+,FACT1LOW(%a6)
-	fsub.x		%fp1,%fp0		# X - N L_LEAD
-	mov.w		(%a1)+,FACT2(%a6)
-
-	fsub.x		%fp2,%fp0		# X - N L_TRAIL
-
-	mov.w		(%a1)+,FACT2HI(%a6)
-	clr.w		FACT2HI+2(%a6)
-	clr.l		FACT2LOW(%a6)
-
-	fmul.x		LOG10(%pc),%fp0		# FP0 IS R
-	add.w		%d1,FACT1(%a6)
-	add.w		%d1,FACT2(%a6)
-
-expr:
-#--FPCR, FP2, FP3 ARE SAVED IN ORDER AS SHOWN.
-#--ADJFACT CONTAINS 2**(M'), FACT1 + FACT2 = 2**(M) * 2**(J/64).
-#--FP0 IS R. THE FOLLOWING CODE COMPUTES
-#--	2**(M'+M) * 2**(J/64) * EXP(R)
-
-	fmov.x		%fp0,%fp1
-	fmul.x		%fp1,%fp1		# FP1 IS S = R*R
-
-	fmov.d		EXPA5(%pc),%fp2		# FP2 IS A5
-	fmov.d		EXPA4(%pc),%fp3		# FP3 IS A4
-
-	fmul.x		%fp1,%fp2		# FP2 IS S*A5
-	fmul.x		%fp1,%fp3		# FP3 IS S*A4
-
-	fadd.d		EXPA3(%pc),%fp2		# FP2 IS A3+S*A5
-	fadd.d		EXPA2(%pc),%fp3		# FP3 IS A2+S*A4
-
-	fmul.x		%fp1,%fp2		# FP2 IS S*(A3+S*A5)
-	fmul.x		%fp1,%fp3		# FP3 IS S*(A2+S*A4)
-
-	fadd.d		EXPA1(%pc),%fp2		# FP2 IS A1+S*(A3+S*A5)
-	fmul.x		%fp0,%fp3		# FP3 IS R*S*(A2+S*A4)
-
-	fmul.x		%fp1,%fp2		# FP2 IS S*(A1+S*(A3+S*A5))
-	fadd.x		%fp3,%fp0		# FP0 IS R+R*S*(A2+S*A4)
-	fadd.x		%fp2,%fp0		# FP0 IS EXP(R) - 1
-
-	fmovm.x		(%sp)+,&0x30		# restore fp2/fp3
-
-#--FINAL RECONSTRUCTION PROCESS
-#--EXP(X) = 2^M*2^(J/64) + 2^M*2^(J/64)*(EXP(R)-1)  -  (1 OR 0)
-
-	fmul.x		FACT1(%a6),%fp0
-	fadd.x		FACT2(%a6),%fp0
-	fadd.x		FACT1(%a6),%fp0
-
-	fmov.l		%d0,%fpcr		# restore users round prec,mode
-	mov.w		%d2,ADJFACT(%a6)	# INSERT EXPONENT
-	mov.l		(%sp)+,%d2
-	mov.l		&0x80000000,ADJFACT+4(%a6)
-	clr.l		ADJFACT+8(%a6)
-	mov.b		&FMUL_OP,%d1		# last inst is MUL
-	fmul.x		ADJFACT(%a6),%fp0	# FINAL ADJUSTMENT
-	bra		t_catch
-
-	global		stentoxd
-stentoxd:
-#--ENTRY POINT FOR 10**(X) FOR DENORMALIZED ARGUMENT
-
-	fmov.l		%d0,%fpcr		# set user's rounding mode/precision
-	fmov.s		&0x3F800000,%fp0	# RETURN 1 + X
-	mov.l		(%a0),%d1
-	or.l		&0x00800001,%d1
-	fadd.s		%d1,%fp0
-	bra		t_pinx2
-
-#########################################################################
-# sscale(): computes the destination operand scaled by the source	#
-#	    operand. If the absoulute value of the source operand is	#
-#	    >= 2^14, an overflow or underflow is returned.		#
-#									#
-# INPUT *************************************************************** #
-#	a0  = pointer to double-extended source operand X		#
-#	a1  = pointer to double-extended destination operand Y		#
-#									#
-# OUTPUT ************************************************************** #
-#	fp0 =  scale(X,Y)						#
-#									#
-#########################################################################
-
-set	SIGN,		L_SCR1
-
-	global		sscale
-sscale:
-	mov.l		%d0,-(%sp)		# store off ctrl bits for now
-
-	mov.w		DST_EX(%a1),%d1		# get dst exponent
-	smi.b		SIGN(%a6)		# use SIGN to hold dst sign
-	andi.l		&0x00007fff,%d1		# strip sign from dst exp
-
-	mov.w		SRC_EX(%a0),%d0		# check src bounds
-	andi.w		&0x7fff,%d0		# clr src sign bit
-	cmpi.w		%d0,&0x3fff		# is src ~ ZERO?
-	blt.w		src_small		# yes
-	cmpi.w		%d0,&0x400c		# no; is src too big?
-	bgt.w		src_out			# yes
-
-#
-# Source is within 2^14 range.
-#
-src_ok:
-	fintrz.x	SRC(%a0),%fp0		# calc int of src
-	fmov.l		%fp0,%d0		# int src to d0
-# don't want any accrued bits from the fintrz showing up later since
-# we may need to read the fpsr for the last fp op in t_catch2().
-	fmov.l		&0x0,%fpsr
-
-	tst.b		DST_HI(%a1)		# is dst denormalized?
-	bmi.b		sok_norm
-
-# the dst is a DENORM. normalize the DENORM and add the adjustment to
-# the src value. then, jump to the norm part of the routine.
-sok_dnrm:
-	mov.l		%d0,-(%sp)		# save src for now
-
-	mov.w		DST_EX(%a1),FP_SCR0_EX(%a6) # make a copy
-	mov.l		DST_HI(%a1),FP_SCR0_HI(%a6)
-	mov.l		DST_LO(%a1),FP_SCR0_LO(%a6)
-
-	lea		FP_SCR0(%a6),%a0	# pass ptr to DENORM
-	bsr.l		norm			# normalize the DENORM
-	neg.l		%d0
-	add.l		(%sp)+,%d0		# add adjustment to src
-
-	fmovm.x		FP_SCR0(%a6),&0x80	# load normalized DENORM
-
-	cmpi.w		%d0,&-0x3fff		# is the shft amt really low?
-	bge.b		sok_norm2		# thank goodness no
-
-# the multiply factor that we're trying to create should be a denorm
-# for the multiply to work. therefore, we're going to actually do a
-# multiply with a denorm which will cause an unimplemented data type
-# exception to be put into the machine which will be caught and corrected
-# later. we don't do this with the DENORMs above because this method
-# is slower. but, don't fret, I don't see it being used much either.
-	fmov.l		(%sp)+,%fpcr		# restore user fpcr
-	mov.l		&0x80000000,%d1		# load normalized mantissa
-	subi.l		&-0x3fff,%d0		# how many should we shift?
-	neg.l		%d0			# make it positive
-	cmpi.b		%d0,&0x20		# is it > 32?
-	bge.b		sok_dnrm_32		# yes
-	lsr.l		%d0,%d1			# no; bit stays in upper lw
-	clr.l		-(%sp)			# insert zero low mantissa
-	mov.l		%d1,-(%sp)		# insert new high mantissa
-	clr.l		-(%sp)			# make zero exponent
-	bra.b		sok_norm_cont
-sok_dnrm_32:
-	subi.b		&0x20,%d0		# get shift count
-	lsr.l		%d0,%d1			# make low mantissa longword
-	mov.l		%d1,-(%sp)		# insert new low mantissa
-	clr.l		-(%sp)			# insert zero high mantissa
-	clr.l		-(%sp)			# make zero exponent
-	bra.b		sok_norm_cont
-
-# the src will force the dst to a DENORM value or worse. so, let's
-# create an fp multiply that will create the result.
-sok_norm:
-	fmovm.x		DST(%a1),&0x80		# load fp0 with normalized src
-sok_norm2:
-	fmov.l		(%sp)+,%fpcr		# restore user fpcr
-
-	addi.w		&0x3fff,%d0		# turn src amt into exp value
-	swap		%d0			# put exponent in high word
-	clr.l		-(%sp)			# insert new exponent
-	mov.l		&0x80000000,-(%sp)	# insert new high mantissa
-	mov.l		%d0,-(%sp)		# insert new lo mantissa
-
-sok_norm_cont:
-	fmov.l		%fpcr,%d0		# d0 needs fpcr for t_catch2
-	mov.b		&FMUL_OP,%d1		# last inst is MUL
-	fmul.x		(%sp)+,%fp0		# do the multiply
-	bra		t_catch2		# catch any exceptions
-
-#
-# Source is outside of 2^14 range.  Test the sign and branch
-# to the appropriate exception handler.
-#
-src_out:
-	mov.l		(%sp)+,%d0		# restore ctrl bits
-	exg		%a0,%a1			# swap src,dst ptrs
-	tst.b		SRC_EX(%a1)		# is src negative?
-	bmi		t_unfl			# yes; underflow
-	bra		t_ovfl_sc		# no; overflow
-
-#
-# The source input is below 1, so we check for denormalized numbers
-# and set unfl.
-#
-src_small:
-	tst.b		DST_HI(%a1)		# is dst denormalized?
-	bpl.b		ssmall_done		# yes
-
-	mov.l		(%sp)+,%d0
-	fmov.l		%d0,%fpcr		# no; load control bits
-	mov.b		&FMOV_OP,%d1		# last inst is MOVE
-	fmov.x		DST(%a1),%fp0		# simply return dest
-	bra		t_catch2
-ssmall_done:
-	mov.l		(%sp)+,%d0		# load control bits into d1
-	mov.l		%a1,%a0			# pass ptr to dst
-	bra		t_resdnrm
-
-#########################################################################
-# smod(): computes the fp MOD of the input values X,Y.			#
-# srem(): computes the fp (IEEE) REM of the input values X,Y.		#
-#									#
-# INPUT *************************************************************** #
-#	a0 = pointer to extended precision input X			#
-#	a1 = pointer to extended precision input Y			#
-#	d0 = round precision,mode					#
-#									#
-#	The input operands X and Y can be either normalized or		#
-#	denormalized.							#
-#									#
-# OUTPUT ************************************************************** #
-#      fp0 = FREM(X,Y) or FMOD(X,Y)					#
-#									#
-# ALGORITHM *********************************************************** #
-#									#
-#       Step 1.  Save and strip signs of X and Y: signX := sign(X),	#
-#                signY := sign(Y), X := |X|, Y := |Y|,			#
-#                signQ := signX EOR signY. Record whether MOD or REM	#
-#                is requested.						#
-#									#
-#       Step 2.  Set L := expo(X)-expo(Y), k := 0, Q := 0.		#
-#                If (L < 0) then					#
-#                   R := X, go to Step 4.				#
-#                else							#
-#                   R := 2^(-L)X, j := L.				#
-#                endif							#
-#									#
-#       Step 3.  Perform MOD(X,Y)					#
-#            3.1 If R = Y, go to Step 9.				#
-#            3.2 If R > Y, then { R := R - Y, Q := Q + 1}		#
-#            3.3 If j = 0, go to Step 4.				#
-#            3.4 k := k + 1, j := j - 1, Q := 2Q, R := 2R. Go to	#
-#                Step 3.1.						#
-#									#
-#       Step 4.  At this point, R = X - QY = MOD(X,Y). Set		#
-#                Last_Subtract := false (used in Step 7 below). If	#
-#                MOD is requested, go to Step 6.			#
-#									#
-#       Step 5.  R = MOD(X,Y), but REM(X,Y) is requested.		#
-#            5.1 If R < Y/2, then R = MOD(X,Y) = REM(X,Y). Go to	#
-#                Step 6.						#
-#            5.2 If R > Y/2, then { set Last_Subtract := true,		#
-#                Q := Q + 1, Y := signY*Y }. Go to Step 6.		#
-#            5.3 This is the tricky case of R = Y/2. If Q is odd,	#
-#                then { Q := Q + 1, signX := -signX }.			#
-#									#
-#       Step 6.  R := signX*R.						#
-#									#
-#       Step 7.  If Last_Subtract = true, R := R - Y.			#
-#									#
-#       Step 8.  Return signQ, last 7 bits of Q, and R as required.	#
-#									#
-#       Step 9.  At this point, R = 2^(-j)*X - Q Y = Y. Thus,		#
-#                X = 2^(j)*(Q+1)Y. set Q := 2^(j)*(Q+1),		#
-#                R := 0. Return signQ, last 7 bits of Q, and R.		#
-#									#
-#########################################################################
-
-	set		Mod_Flag,L_SCR3
-	set		Sc_Flag,L_SCR3+1
-
-	set		SignY,L_SCR2
-	set		SignX,L_SCR2+2
-	set		SignQ,L_SCR3+2
-
-	set		Y,FP_SCR0
-	set		Y_Hi,Y+4
-	set		Y_Lo,Y+8
-
-	set		R,FP_SCR1
-	set		R_Hi,R+4
-	set		R_Lo,R+8
-
-Scale:
-	long		0x00010000,0x80000000,0x00000000,0x00000000
-
-	global		smod
-smod:
-	clr.b		FPSR_QBYTE(%a6)
-	mov.l		%d0,-(%sp)		# save ctrl bits
-	clr.b		Mod_Flag(%a6)
-	bra.b		Mod_Rem
-
-	global		srem
-srem:
-	clr.b		FPSR_QBYTE(%a6)
-	mov.l		%d0,-(%sp)		# save ctrl bits
-	mov.b		&0x1,Mod_Flag(%a6)
-
-Mod_Rem:
-#..Save sign of X and Y
-	movm.l		&0x3f00,-(%sp)		# save data registers
-	mov.w		SRC_EX(%a0),%d3
-	mov.w		%d3,SignY(%a6)
-	and.l		&0x00007FFF,%d3		# Y := |Y|
-
-#
-	mov.l		SRC_HI(%a0),%d4
-	mov.l		SRC_LO(%a0),%d5		# (D3,D4,D5) is |Y|
-
-	tst.l		%d3
-	bne.b		Y_Normal
-
-	mov.l		&0x00003FFE,%d3		# $3FFD + 1
-	tst.l		%d4
-	bne.b		HiY_not0
-
-HiY_0:
-	mov.l		%d5,%d4
-	clr.l		%d5
-	sub.l		&32,%d3
-	clr.l		%d6
-	bfffo		%d4{&0:&32},%d6
-	lsl.l		%d6,%d4
-	sub.l		%d6,%d3			# (D3,D4,D5) is normalized
-#	                                        ...with bias $7FFD
-	bra.b		Chk_X
-
-HiY_not0:
-	clr.l		%d6
-	bfffo		%d4{&0:&32},%d6
-	sub.l		%d6,%d3
-	lsl.l		%d6,%d4
-	mov.l		%d5,%d7			# a copy of D5
-	lsl.l		%d6,%d5
-	neg.l		%d6
-	add.l		&32,%d6
-	lsr.l		%d6,%d7
-	or.l		%d7,%d4			# (D3,D4,D5) normalized
-#                                       ...with bias $7FFD
-	bra.b		Chk_X
-
-Y_Normal:
-	add.l		&0x00003FFE,%d3		# (D3,D4,D5) normalized
-#                                       ...with bias $7FFD
-
-Chk_X:
-	mov.w		DST_EX(%a1),%d0
-	mov.w		%d0,SignX(%a6)
-	mov.w		SignY(%a6),%d1
-	eor.l		%d0,%d1
-	and.l		&0x00008000,%d1
-	mov.w		%d1,SignQ(%a6)		# sign(Q) obtained
-	and.l		&0x00007FFF,%d0
-	mov.l		DST_HI(%a1),%d1
-	mov.l		DST_LO(%a1),%d2		# (D0,D1,D2) is |X|
-	tst.l		%d0
-	bne.b		X_Normal
-	mov.l		&0x00003FFE,%d0
-	tst.l		%d1
-	bne.b		HiX_not0
-
-HiX_0:
-	mov.l		%d2,%d1
-	clr.l		%d2
-	sub.l		&32,%d0
-	clr.l		%d6
-	bfffo		%d1{&0:&32},%d6
-	lsl.l		%d6,%d1
-	sub.l		%d6,%d0			# (D0,D1,D2) is normalized
-#                                       ...with bias $7FFD
-	bra.b		Init
-
-HiX_not0:
-	clr.l		%d6
-	bfffo		%d1{&0:&32},%d6
-	sub.l		%d6,%d0
-	lsl.l		%d6,%d1
-	mov.l		%d2,%d7			# a copy of D2
-	lsl.l		%d6,%d2
-	neg.l		%d6
-	add.l		&32,%d6
-	lsr.l		%d6,%d7
-	or.l		%d7,%d1			# (D0,D1,D2) normalized
-#                                       ...with bias $7FFD
-	bra.b		Init
-
-X_Normal:
-	add.l		&0x00003FFE,%d0		# (D0,D1,D2) normalized
-#                                       ...with bias $7FFD
-
-Init:
-#
-	mov.l		%d3,L_SCR1(%a6)		# save biased exp(Y)
-	mov.l		%d0,-(%sp)		# save biased exp(X)
-	sub.l		%d3,%d0			# L := expo(X)-expo(Y)
-
-	clr.l		%d6			# D6 := carry <- 0
-	clr.l		%d3			# D3 is Q
-	mov.l		&0,%a1			# A1 is k; j+k=L, Q=0
-
-#..(Carry,D1,D2) is R
-	tst.l		%d0
-	bge.b		Mod_Loop_pre
-
-#..expo(X) < expo(Y). Thus X = mod(X,Y)
-#
-	mov.l		(%sp)+,%d0		# restore d0
-	bra.w		Get_Mod
-
-Mod_Loop_pre:
-	addq.l		&0x4,%sp		# erase exp(X)
-#..At this point  R = 2^(-L)X; Q = 0; k = 0; and  k+j = L
-Mod_Loop:
-	tst.l		%d6			# test carry bit
-	bgt.b		R_GT_Y
-
-#..At this point carry = 0, R = (D1,D2), Y = (D4,D5)
-	cmp.l		%d1,%d4			# compare hi(R) and hi(Y)
-	bne.b		R_NE_Y
-	cmp.l		%d2,%d5			# compare lo(R) and lo(Y)
-	bne.b		R_NE_Y
-
-#..At this point, R = Y
-	bra.w		Rem_is_0
-
-R_NE_Y:
-#..use the borrow of the previous compare
-	bcs.b		R_LT_Y			# borrow is set iff R < Y
-
-R_GT_Y:
-#..If Carry is set, then Y < (Carry,D1,D2) < 2Y. Otherwise, Carry = 0
-#..and Y < (D1,D2) < 2Y. Either way, perform R - Y
-	sub.l		%d5,%d2			# lo(R) - lo(Y)
-	subx.l		%d4,%d1			# hi(R) - hi(Y)
-	clr.l		%d6			# clear carry
-	addq.l		&1,%d3			# Q := Q + 1
-
-R_LT_Y:
-#..At this point, Carry=0, R < Y. R = 2^(k-L)X - QY; k+j = L; j >= 0.
-	tst.l		%d0			# see if j = 0.
-	beq.b		PostLoop
-
-	add.l		%d3,%d3			# Q := 2Q
-	add.l		%d2,%d2			# lo(R) = 2lo(R)
-	roxl.l		&1,%d1			# hi(R) = 2hi(R) + carry
-	scs		%d6			# set Carry if 2(R) overflows
-	addq.l		&1,%a1			# k := k+1
-	subq.l		&1,%d0			# j := j - 1
-#..At this point, R=(Carry,D1,D2) = 2^(k-L)X - QY, j+k=L, j >= 0, R < 2Y.
-
-	bra.b		Mod_Loop
-
-PostLoop:
-#..k = L, j = 0, Carry = 0, R = (D1,D2) = X - QY, R < Y.
-
-#..normalize R.
-	mov.l		L_SCR1(%a6),%d0		# new biased expo of R
-	tst.l		%d1
-	bne.b		HiR_not0
-
-HiR_0:
-	mov.l		%d2,%d1
-	clr.l		%d2
-	sub.l		&32,%d0
-	clr.l		%d6
-	bfffo		%d1{&0:&32},%d6
-	lsl.l		%d6,%d1
-	sub.l		%d6,%d0			# (D0,D1,D2) is normalized
-#                                       ...with bias $7FFD
-	bra.b		Get_Mod
-
-HiR_not0:
-	clr.l		%d6
-	bfffo		%d1{&0:&32},%d6
-	bmi.b		Get_Mod			# already normalized
-	sub.l		%d6,%d0
-	lsl.l		%d6,%d1
-	mov.l		%d2,%d7			# a copy of D2
-	lsl.l		%d6,%d2
-	neg.l		%d6
-	add.l		&32,%d6
-	lsr.l		%d6,%d7
-	or.l		%d7,%d1			# (D0,D1,D2) normalized
-
-#
-Get_Mod:
-	cmp.l		%d0,&0x000041FE
-	bge.b		No_Scale
-Do_Scale:
-	mov.w		%d0,R(%a6)
-	mov.l		%d1,R_Hi(%a6)
-	mov.l		%d2,R_Lo(%a6)
-	mov.l		L_SCR1(%a6),%d6
-	mov.w		%d6,Y(%a6)
-	mov.l		%d4,Y_Hi(%a6)
-	mov.l		%d5,Y_Lo(%a6)
-	fmov.x		R(%a6),%fp0		# no exception
-	mov.b		&1,Sc_Flag(%a6)
-	bra.b		ModOrRem
-No_Scale:
-	mov.l		%d1,R_Hi(%a6)
-	mov.l		%d2,R_Lo(%a6)
-	sub.l		&0x3FFE,%d0
-	mov.w		%d0,R(%a6)
-	mov.l		L_SCR1(%a6),%d6
-	sub.l		&0x3FFE,%d6
-	mov.l		%d6,L_SCR1(%a6)
-	fmov.x		R(%a6),%fp0
-	mov.w		%d6,Y(%a6)
-	mov.l		%d4,Y_Hi(%a6)
-	mov.l		%d5,Y_Lo(%a6)
-	clr.b		Sc_Flag(%a6)
-
-#
-ModOrRem:
-	tst.b		Mod_Flag(%a6)
-	beq.b		Fix_Sign
-
-	mov.l		L_SCR1(%a6),%d6		# new biased expo(Y)
-	subq.l		&1,%d6			# biased expo(Y/2)
-	cmp.l		%d0,%d6
-	blt.b		Fix_Sign
-	bgt.b		Last_Sub
-
-	cmp.l		%d1,%d4
-	bne.b		Not_EQ
-	cmp.l		%d2,%d5
-	bne.b		Not_EQ
-	bra.w		Tie_Case
-
-Not_EQ:
-	bcs.b		Fix_Sign
-
-Last_Sub:
-#
-	fsub.x		Y(%a6),%fp0		# no exceptions
-	addq.l		&1,%d3			# Q := Q + 1
-
-#
-Fix_Sign:
-#..Get sign of X
-	mov.w		SignX(%a6),%d6
-	bge.b		Get_Q
-	fneg.x		%fp0
-
-#..Get Q
-#
-Get_Q:
-	clr.l		%d6
-	mov.w		SignQ(%a6),%d6		# D6 is sign(Q)
-	mov.l		&8,%d7
-	lsr.l		%d7,%d6
-	and.l		&0x0000007F,%d3		# 7 bits of Q
-	or.l		%d6,%d3			# sign and bits of Q
-#	swap		%d3
-#	fmov.l		%fpsr,%d6
-#	and.l		&0xFF00FFFF,%d6
-#	or.l		%d3,%d6
-#	fmov.l		%d6,%fpsr		# put Q in fpsr
-	mov.b		%d3,FPSR_QBYTE(%a6)	# put Q in fpsr
-
-#
-Restore:
-	movm.l		(%sp)+,&0xfc		#  {%d2-%d7}
-	mov.l		(%sp)+,%d0
-	fmov.l		%d0,%fpcr
-	tst.b		Sc_Flag(%a6)
-	beq.b		Finish
-	mov.b		&FMUL_OP,%d1		# last inst is MUL
-	fmul.x		Scale(%pc),%fp0		# may cause underflow
-	bra		t_catch2
-# the '040 package did this apparently to see if the dst operand for the
-# preceding fmul was a denorm. but, it better not have been since the
-# algorithm just got done playing with fp0 and expected no exceptions
-# as a result. trust me...
-#	bra		t_avoid_unsupp		# check for denorm as a
-#						;result of the scaling
-
-Finish:
-	mov.b		&FMOV_OP,%d1		# last inst is MOVE
-	fmov.x		%fp0,%fp0		# capture exceptions & round
-	bra		t_catch2
-
-Rem_is_0:
-#..R = 2^(-j)X - Q Y = Y, thus R = 0 and quotient = 2^j (Q+1)
-	addq.l		&1,%d3
-	cmp.l		%d0,&8			# D0 is j
-	bge.b		Q_Big
-
-	lsl.l		%d0,%d3
-	bra.b		Set_R_0
-
-Q_Big:
-	clr.l		%d3
-
-Set_R_0:
-	fmov.s		&0x00000000,%fp0
-	clr.b		Sc_Flag(%a6)
-	bra.w		Fix_Sign
-
-Tie_Case:
-#..Check parity of Q
-	mov.l		%d3,%d6
-	and.l		&0x00000001,%d6
-	tst.l		%d6
-	beq.w		Fix_Sign		# Q is even
-
-#..Q is odd, Q := Q + 1, signX := -signX
-	addq.l		&1,%d3
-	mov.w		SignX(%a6),%d6
-	eor.l		&0x00008000,%d6
-	mov.w		%d6,SignX(%a6)
-	bra.w		Fix_Sign
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	tag(): return the optype of the input ext fp number		#
-#									#
-#	This routine is used by the 060FPLSP.				#
-#									#
-# XREF ****************************************************************	#
-#	None								#
-#									#
-# INPUT ***************************************************************	#
-#	a0 = pointer to extended precision operand			#
-#									#
-# OUTPUT **************************************************************	#
-#	d0 = value of type tag						#
-#		one of: NORM, INF, QNAN, SNAN, DENORM, ZERO		#
-#									#
-# ALGORITHM ***********************************************************	#
-#	Simply test the exponent, j-bit, and mantissa values to		#
-# determine the type of operand.					#
-#	If it's an unnormalized zero, alter the operand and force it	#
-# to be a normal zero.							#
-#									#
-#########################################################################
-
-	global		tag
-tag:
-	mov.w		FTEMP_EX(%a0), %d0	# extract exponent
-	andi.w		&0x7fff, %d0		# strip off sign
-	cmpi.w		%d0, &0x7fff		# is (EXP == MAX)?
-	beq.b		inf_or_nan_x
-not_inf_or_nan_x:
-	btst		&0x7,FTEMP_HI(%a0)
-	beq.b		not_norm_x
-is_norm_x:
-	mov.b		&NORM, %d0
-	rts
-not_norm_x:
-	tst.w		%d0			# is exponent = 0?
-	bne.b		is_unnorm_x
-not_unnorm_x:
-	tst.l		FTEMP_HI(%a0)
-	bne.b		is_denorm_x
-	tst.l		FTEMP_LO(%a0)
-	bne.b		is_denorm_x
-is_zero_x:
-	mov.b		&ZERO, %d0
-	rts
-is_denorm_x:
-	mov.b		&DENORM, %d0
-	rts
-is_unnorm_x:
-	bsr.l		unnorm_fix		# convert to norm,denorm,or zero
-	rts
-is_unnorm_reg_x:
-	mov.b		&UNNORM, %d0
-	rts
-inf_or_nan_x:
-	tst.l		FTEMP_LO(%a0)
-	bne.b		is_nan_x
-	mov.l		FTEMP_HI(%a0), %d0
-	and.l		&0x7fffffff, %d0	# msb is a don't care!
-	bne.b		is_nan_x
-is_inf_x:
-	mov.b		&INF, %d0
-	rts
-is_nan_x:
-	mov.b		&QNAN, %d0
-	rts
-
-#############################################################
-
-qnan:	long		0x7fff0000, 0xffffffff, 0xffffffff
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	t_dz(): Handle 060FPLSP dz exception for "flogn" emulation.	#
-#	t_dz2(): Handle 060FPLSP dz exception for "fatanh" emulation.	#
-#									#
-#	These rouitnes are used by the 060FPLSP package.		#
-#									#
-# XREF ****************************************************************	#
-#	None								#
-#									#
-# INPUT ***************************************************************	#
-#	a0 = pointer to extended precision source operand.		#
-#									#
-# OUTPUT **************************************************************	#
-#	fp0 = default DZ result.					#
-#									#
-# ALGORITHM ***********************************************************	#
-#	Transcendental emulation for the 060FPLSP has detected that	#
-# a DZ exception should occur for the instruction. If DZ is disabled,	#
-# return the default result.						#
-#	If DZ is enabled, the dst operand should be returned unscathed	#
-# in fp0 while fp1 is used to create a DZ exception so that the		#
-# operating system can log that such an event occurred.			#
-#									#
-#########################################################################
-
-	global		t_dz
-t_dz:
-	tst.b		SRC_EX(%a0)		# check sign for neg or pos
-	bpl.b		dz_pinf			# branch if pos sign
-
-	global		t_dz2
-t_dz2:
-	ori.l		&dzinf_mask+neg_mask,USER_FPSR(%a6) # set N/I/DZ/ADZ
-
-	btst		&dz_bit,FPCR_ENABLE(%a6)
-	bne.b		dz_minf_ena
-
-# dz is disabled. return a -INF.
-	fmov.s		&0xff800000,%fp0	# return -INF
-	rts
-
-# dz is enabled. create a dz exception so the user can record it
-# but use fp1 instead. return the dst operand unscathed in fp0.
-dz_minf_ena:
-	fmovm.x		EXC_FP0(%a6),&0x80	# return fp0 unscathed
-	fmov.l		USER_FPCR(%a6),%fpcr
-	fmov.s		&0xbf800000,%fp1	# load -1
-	fdiv.s		&0x00000000,%fp1	# -1 / 0
-	rts
-
-dz_pinf:
-	ori.l		&dzinf_mask,USER_FPSR(%a6) # set I/DZ/ADZ
-
-	btst		&dz_bit,FPCR_ENABLE(%a6)
-	bne.b		dz_pinf_ena
-
-# dz is disabled. return a +INF.
-	fmov.s		&0x7f800000,%fp0	# return +INF
-	rts
-
-# dz is enabled. create a dz exception so the user can record it
-# but use fp1 instead. return the dst operand unscathed in fp0.
-dz_pinf_ena:
-	fmovm.x		EXC_FP0(%a6),&0x80	# return fp0 unscathed
-	fmov.l		USER_FPCR(%a6),%fpcr
-	fmov.s		&0x3f800000,%fp1	# load +1
-	fdiv.s		&0x00000000,%fp1	# +1 / 0
-	rts
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	t_operr(): Handle 060FPLSP OPERR exception during emulation.	#
-#									#
-#	This routine is used by the 060FPLSP package.			#
-#									#
-# XREF ****************************************************************	#
-#	None.								#
-#									#
-# INPUT ***************************************************************	#
-#	fp1 = source operand						#
-#									#
-# OUTPUT **************************************************************	#
-#	fp0 = default result						#
-#	fp1 = unchanged							#
-#									#
-# ALGORITHM ***********************************************************	#
-#	An operand error should occur as the result of transcendental	#
-# emulation in the 060FPLSP. If OPERR is disabled, just return a NAN	#
-# in fp0. If OPERR is enabled, return the dst operand unscathed in fp0	#
-# and the source operand in fp1. Use fp2 to create an OPERR exception	#
-# so that the operating system can log the event.			#
-#									#
-#########################################################################
-
-	global		t_operr
-t_operr:
-	ori.l		&opnan_mask,USER_FPSR(%a6) # set NAN/OPERR/AIOP
-
-	btst		&operr_bit,FPCR_ENABLE(%a6)
-	bne.b		operr_ena
-
-# operr is disabled. return a QNAN in fp0
-	fmovm.x		qnan(%pc),&0x80		# return QNAN
-	rts
-
-# operr is enabled. create an operr exception so the user can record it
-# but use fp2 instead. return the dst operand unscathed in fp0.
-operr_ena:
-	fmovm.x		EXC_FP0(%a6),&0x80	# return fp0 unscathed
-	fmov.l		USER_FPCR(%a6),%fpcr
-	fmovm.x		&0x04,-(%sp)		# save fp2
-	fmov.s		&0x7f800000,%fp2	# load +INF
-	fmul.s		&0x00000000,%fp2	# +INF x 0
-	fmovm.x		(%sp)+,&0x20		# restore fp2
-	rts
-
-pls_huge:
-	long		0x7ffe0000,0xffffffff,0xffffffff
-mns_huge:
-	long		0xfffe0000,0xffffffff,0xffffffff
-pls_tiny:
-	long		0x00000000,0x80000000,0x00000000
-mns_tiny:
-	long		0x80000000,0x80000000,0x00000000
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	t_unfl(): Handle 060FPLSP underflow exception during emulation.	#
-#	t_unfl2(): Handle 060FPLSP underflow exception during		#
-#	           emulation. result always positive.			#
-#									#
-#	This routine is used by the 060FPLSP package.			#
-#									#
-# XREF ****************************************************************	#
-#	None.								#
-#									#
-# INPUT ***************************************************************	#
-#	a0 = pointer to extended precision source operand		#
-#									#
-# OUTPUT **************************************************************	#
-#	fp0 = default underflow result					#
-#									#
-# ALGORITHM ***********************************************************	#
-#	An underflow should occur as the result of transcendental	#
-# emulation in the 060FPLSP. Create an underflow by using "fmul"	#
-# and two very small numbers of appropriate sign so the operating	#
-# system can log the event.						#
-#									#
-#########################################################################
-
-	global		t_unfl
-t_unfl:
-	tst.b		SRC_EX(%a0)
-	bpl.b		unf_pos
-
-	global		t_unfl2
-t_unfl2:
-	ori.l		&unfinx_mask+neg_mask,USER_FPSR(%a6) # set N/UNFL/INEX2/AUNFL/AINEX
-
-	fmov.l		USER_FPCR(%a6),%fpcr
-	fmovm.x		mns_tiny(%pc),&0x80
-	fmul.x		pls_tiny(%pc),%fp0
-
-	fmov.l		%fpsr,%d0
-	rol.l		&0x8,%d0
-	mov.b		%d0,FPSR_CC(%a6)
-	rts
-unf_pos:
-	ori.w		&unfinx_mask,FPSR_EXCEPT(%a6) # set UNFL/INEX2/AUNFL/AINEX
-
-	fmov.l		USER_FPCR(%a6),%fpcr
-	fmovm.x		pls_tiny(%pc),&0x80
-	fmul.x		%fp0,%fp0
-
-	fmov.l		%fpsr,%d0
-	rol.l		&0x8,%d0
-	mov.b		%d0,FPSR_CC(%a6)
-	rts
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	t_ovfl(): Handle 060FPLSP overflow exception during emulation.	#
-#		  (monadic)						#
-#	t_ovfl2(): Handle 060FPLSP overflow exception during		#
-#	           emulation. result always positive. (dyadic)		#
-#	t_ovfl_sc(): Handle 060FPLSP overflow exception during		#
-#	             emulation for "fscale".				#
-#									#
-#	This routine is used by the 060FPLSP package.			#
-#									#
-# XREF ****************************************************************	#
-#	None.								#
-#									#
-# INPUT ***************************************************************	#
-#	a0 = pointer to extended precision source operand		#
-#									#
-# OUTPUT **************************************************************	#
-#	fp0 = default underflow result					#
-#									#
-# ALGORITHM ***********************************************************	#
-#	An overflow should occur as the result of transcendental	#
-# emulation in the 060FPLSP. Create an overflow by using "fmul"		#
-# and two very lareg numbers of appropriate sign so the operating	#
-# system can log the event.						#
-#	For t_ovfl_sc() we take special care not to lose the INEX2 bit.	#
-#									#
-#########################################################################
-
-	global		t_ovfl_sc
-t_ovfl_sc:
-	ori.l		&ovfl_inx_mask,USER_FPSR(%a6) # set OVFL/AOVFL/AINEX
-
-	mov.b		%d0,%d1			# fetch rnd prec,mode
-	andi.b		&0xc0,%d1		# extract prec
-	beq.w		ovfl_work
-
-# dst op is a DENORM. we have to normalize the mantissa to see if the
-# result would be inexact for the given precision. make a copy of the
-# dst so we don't screw up the version passed to us.
-	mov.w		LOCAL_EX(%a0),FP_SCR0_EX(%a6)
-	mov.l		LOCAL_HI(%a0),FP_SCR0_HI(%a6)
-	mov.l		LOCAL_LO(%a0),FP_SCR0_LO(%a6)
-	lea		FP_SCR0(%a6),%a0	# pass ptr to FP_SCR0
-	movm.l		&0xc080,-(%sp)		# save d0-d1/a0
-	bsr.l		norm			# normalize mantissa
-	movm.l		(%sp)+,&0x0103		# restore d0-d1/a0
-
-	cmpi.b		%d1,&0x40		# is precision sgl?
-	bne.b		ovfl_sc_dbl		# no; dbl
-ovfl_sc_sgl:
-	tst.l		LOCAL_LO(%a0)		# is lo lw of sgl set?
-	bne.b		ovfl_sc_inx		# yes
-	tst.b		3+LOCAL_HI(%a0)		# is lo byte of hi lw set?
-	bne.b		ovfl_sc_inx		# yes
-	bra.w		ovfl_work		# don't set INEX2
-ovfl_sc_dbl:
-	mov.l		LOCAL_LO(%a0),%d1	# are any of lo 11 bits of
-	andi.l		&0x7ff,%d1		# dbl mantissa set?
-	beq.w		ovfl_work		# no; don't set INEX2
-ovfl_sc_inx:
-	ori.l		&inex2_mask,USER_FPSR(%a6) # set INEX2
-	bra.b		ovfl_work		# continue
-
-	global		t_ovfl
-t_ovfl:
-	ori.w		&ovfinx_mask,FPSR_EXCEPT(%a6) # set OVFL/INEX2/AOVFL/AINEX
-ovfl_work:
-	tst.b		SRC_EX(%a0)
-	bpl.b		ovfl_p
-ovfl_m:
-	fmov.l		USER_FPCR(%a6),%fpcr
-	fmovm.x		mns_huge(%pc),&0x80
-	fmul.x		pls_huge(%pc),%fp0
-
-	fmov.l		%fpsr,%d0
-	rol.l		&0x8,%d0
-	ori.b		&neg_mask,%d0
-	mov.b		%d0,FPSR_CC(%a6)
-	rts
-ovfl_p:
-	fmov.l		USER_FPCR(%a6),%fpcr
-	fmovm.x		pls_huge(%pc),&0x80
-	fmul.x		pls_huge(%pc),%fp0
-
-	fmov.l		%fpsr,%d0
-	rol.l		&0x8,%d0
-	mov.b		%d0,FPSR_CC(%a6)
-	rts
-
-	global		t_ovfl2
-t_ovfl2:
-	ori.w		&ovfinx_mask,FPSR_EXCEPT(%a6) # set OVFL/INEX2/AOVFL/AINEX
-	fmov.l		USER_FPCR(%a6),%fpcr
-	fmovm.x		pls_huge(%pc),&0x80
-	fmul.x		pls_huge(%pc),%fp0
-
-	fmov.l		%fpsr,%d0
-	rol.l		&0x8,%d0
-	mov.b		%d0,FPSR_CC(%a6)
-	rts
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	t_catch(): Handle 060FPLSP OVFL,UNFL,or INEX2 exception during	#
-#		   emulation.						#
-#	t_catch2(): Handle 060FPLSP OVFL,UNFL,or INEX2 exception during	#
-#		    emulation.						#
-#									#
-#	These routines are used by the 060FPLSP package.		#
-#									#
-# XREF ****************************************************************	#
-#	None.								#
-#									#
-# INPUT ***************************************************************	#
-#	fp0 = default underflow or overflow result			#
-#									#
-# OUTPUT **************************************************************	#
-#	fp0 = default result						#
-#									#
-# ALGORITHM ***********************************************************	#
-#	If an overflow or underflow occurred during the last		#
-# instruction of transcendental 060FPLSP emulation, then it has already	#
-# occurred and has been logged. Now we need to see if an inexact	#
-# exception should occur.						#
-#									#
-#########################################################################
-
-	global		t_catch2
-t_catch2:
-	fmov.l		%fpsr,%d0
-	or.l		%d0,USER_FPSR(%a6)
-	bra.b		inx2_work
-
-	global		t_catch
-t_catch:
-	fmov.l		%fpsr,%d0
-	or.l		%d0,USER_FPSR(%a6)
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	t_inx2(): Handle inexact 060FPLSP exception during emulation.	#
-#	t_pinx2(): Handle inexact 060FPLSP exception for "+" results.	#
-#	t_minx2(): Handle inexact 060FPLSP exception for "-" results.	#
-#									#
-# XREF ****************************************************************	#
-#	None.								#
-#									#
-# INPUT ***************************************************************	#
-#	fp0 = default result						#
-#									#
-# OUTPUT **************************************************************	#
-#	fp0 = default result						#
-#									#
-# ALGORITHM ***********************************************************	#
-#	The last instruction of transcendental emulation for the	#
-# 060FPLSP should be inexact. So, if inexact is enabled, then we create	#
-# the event here by adding a large and very small number together	#
-# so that the operating system can log the event.			#
-#	Must check, too, if the result was zero, in which case we just	#
-# set the FPSR bits and return.						#
-#									#
-#########################################################################
-
-	global		t_inx2
-t_inx2:
-	fblt.w		t_minx2
-	fbeq.w		inx2_zero
-
-	global		t_pinx2
-t_pinx2:
-	ori.w		&inx2a_mask,FPSR_EXCEPT(%a6) # set INEX2/AINEX
-	bra.b		inx2_work
-
-	global		t_minx2
-t_minx2:
-	ori.l		&inx2a_mask+neg_mask,USER_FPSR(%a6)
-
-inx2_work:
-	btst		&inex2_bit,FPCR_ENABLE(%a6) # is inexact enabled?
-	bne.b		inx2_work_ena		# yes
-	rts
-inx2_work_ena:
-	fmov.l		USER_FPCR(%a6),%fpcr	# insert user's exceptions
-	fmov.s		&0x3f800000,%fp1	# load +1
-	fadd.x		pls_tiny(%pc),%fp1	# cause exception
-	rts
-
-inx2_zero:
-	mov.b		&z_bmask,FPSR_CC(%a6)
-	ori.w		&inx2a_mask,2+USER_FPSR(%a6) # set INEX/AINEX
-	rts
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	t_extdnrm(): Handle DENORM inputs in 060FPLSP.			#
-#	t_resdnrm(): Handle DENORM inputs in 060FPLSP for "fscale".	#
-#									#
-#	This routine is used by the 060FPLSP package.			#
-#									#
-# XREF ****************************************************************	#
-#	None.								#
-#									#
-# INPUT ***************************************************************	#
-#	a0 = pointer to extended precision input operand		#
-#									#
-# OUTPUT **************************************************************	#
-#	fp0 = default result						#
-#									#
-# ALGORITHM ***********************************************************	#
-#	For all functions that have a denormalized input and that	#
-# f(x)=x, this is the entry point.					#
-#	DENORM value is moved using "fmove" which triggers an exception	#
-# if enabled so the operating system can log the event.			#
-#									#
-#########################################################################
-
-	global		t_extdnrm
-t_extdnrm:
-	fmov.l		USER_FPCR(%a6),%fpcr
-	fmov.x		SRC_EX(%a0),%fp0
-	fmov.l		%fpsr,%d0
-	ori.l		&unfinx_mask,%d0
-	or.l		%d0,USER_FPSR(%a6)
-	rts
-
-	global		t_resdnrm
-t_resdnrm:
-	fmov.l		USER_FPCR(%a6),%fpcr
-	fmov.x		SRC_EX(%a0),%fp0
-	fmov.l		%fpsr,%d0
-	or.l		%d0,USER_FPSR(%a6)
-	rts
-
-##########################################
-
-#
-# sto_cos:
-#	This is used by fsincos library emulation. The correct
-# values are already in fp0 and fp1 so we do nothing here.
-#
-	global		sto_cos
-sto_cos:
-	rts
-
-##########################################
-
-#
-#	dst_qnan --- force result when destination is a NaN
-#
-	global		dst_qnan
-dst_qnan:
-	fmov.x		DST(%a1),%fp0
-	tst.b		DST_EX(%a1)
-	bmi.b		dst_qnan_m
-dst_qnan_p:
-	mov.b		&nan_bmask,FPSR_CC(%a6)
-	rts
-dst_qnan_m:
-	mov.b		&nan_bmask+neg_bmask,FPSR_CC(%a6)
-	rts
-
-#
-#	src_qnan --- force result when source is a NaN
-#
-	global		src_qnan
-src_qnan:
-	fmov.x		SRC(%a0),%fp0
-	tst.b		SRC_EX(%a0)
-	bmi.b		src_qnan_m
-src_qnan_p:
-	mov.b		&nan_bmask,FPSR_CC(%a6)
-	rts
-src_qnan_m:
-	mov.b		&nan_bmask+neg_bmask,FPSR_CC(%a6)
-	rts
-
-##########################################
-
-#
-#	Native instruction support
-#
-#	Some systems may need entry points even for 68060 native
-#	instructions.  These routines are provided for
-#	convenience.
-#
-	global		_fadds_
-_fadds_:
-	fmov.l		%fpcr,-(%sp)		# save fpcr
-	fmov.l		&0x00000000,%fpcr	# clear fpcr for load
-	fmov.s		0x8(%sp),%fp0		# load sgl dst
-	fmov.l		(%sp)+,%fpcr		# restore fpcr
-	fadd.s		0x8(%sp),%fp0		# fadd w/ sgl src
-	rts
-
-	global		_faddd_
-_faddd_:
-	fmov.l		%fpcr,-(%sp)		# save fpcr
-	fmov.l		&0x00000000,%fpcr	# clear fpcr for load
-	fmov.d		0x8(%sp),%fp0		# load dbl dst
-	fmov.l		(%sp)+,%fpcr		# restore fpcr
-	fadd.d		0xc(%sp),%fp0		# fadd w/ dbl src
-	rts
-
-	global		_faddx_
-_faddx_:
-	fmovm.x		0x4(%sp),&0x80		# load ext dst
-	fadd.x		0x10(%sp),%fp0		# fadd w/ ext src
-	rts
-
-	global		_fsubs_
-_fsubs_:
-	fmov.l		%fpcr,-(%sp)		# save fpcr
-	fmov.l		&0x00000000,%fpcr	# clear fpcr for load
-	fmov.s		0x8(%sp),%fp0		# load sgl dst
-	fmov.l		(%sp)+,%fpcr		# restore fpcr
-	fsub.s		0x8(%sp),%fp0		# fsub w/ sgl src
-	rts
-
-	global		_fsubd_
-_fsubd_:
-	fmov.l		%fpcr,-(%sp)		# save fpcr
-	fmov.l		&0x00000000,%fpcr	# clear fpcr for load
-	fmov.d		0x8(%sp),%fp0		# load dbl dst
-	fmov.l		(%sp)+,%fpcr		# restore fpcr
-	fsub.d		0xc(%sp),%fp0		# fsub w/ dbl src
-	rts
-
-	global		_fsubx_
-_fsubx_:
-	fmovm.x		0x4(%sp),&0x80		# load ext dst
-	fsub.x		0x10(%sp),%fp0		# fsub w/ ext src
-	rts
-
-	global		_fmuls_
-_fmuls_:
-	fmov.l		%fpcr,-(%sp)		# save fpcr
-	fmov.l		&0x00000000,%fpcr	# clear fpcr for load
-	fmov.s		0x8(%sp),%fp0		# load sgl dst
-	fmov.l		(%sp)+,%fpcr		# restore fpcr
-	fmul.s		0x8(%sp),%fp0		# fmul w/ sgl src
-	rts
-
-	global		_fmuld_
-_fmuld_:
-	fmov.l		%fpcr,-(%sp)		# save fpcr
-	fmov.l		&0x00000000,%fpcr	# clear fpcr for load
-	fmov.d		0x8(%sp),%fp0		# load dbl dst
-	fmov.l		(%sp)+,%fpcr		# restore fpcr
-	fmul.d		0xc(%sp),%fp0		# fmul w/ dbl src
-	rts
-
-	global		_fmulx_
-_fmulx_:
-	fmovm.x		0x4(%sp),&0x80		# load ext dst
-	fmul.x		0x10(%sp),%fp0		# fmul w/ ext src
-	rts
-
-	global		_fdivs_
-_fdivs_:
-	fmov.l		%fpcr,-(%sp)		# save fpcr
-	fmov.l		&0x00000000,%fpcr	# clear fpcr for load
-	fmov.s		0x8(%sp),%fp0		# load sgl dst
-	fmov.l		(%sp)+,%fpcr		# restore fpcr
-	fdiv.s		0x8(%sp),%fp0		# fdiv w/ sgl src
-	rts
-
-	global		_fdivd_
-_fdivd_:
-	fmov.l		%fpcr,-(%sp)		# save fpcr
-	fmov.l		&0x00000000,%fpcr	# clear fpcr for load
-	fmov.d		0x8(%sp),%fp0		# load dbl dst
-	fmov.l		(%sp)+,%fpcr		# restore fpcr
-	fdiv.d		0xc(%sp),%fp0		# fdiv w/ dbl src
-	rts
-
-	global		_fdivx_
-_fdivx_:
-	fmovm.x		0x4(%sp),&0x80		# load ext dst
-	fdiv.x		0x10(%sp),%fp0		# fdiv w/ ext src
-	rts
-
-	global		_fabss_
-_fabss_:
-	fabs.s		0x4(%sp),%fp0		# fabs w/ sgl src
-	rts
-
-	global		_fabsd_
-_fabsd_:
-	fabs.d		0x4(%sp),%fp0		# fabs w/ dbl src
-	rts
-
-	global		_fabsx_
-_fabsx_:
-	fabs.x		0x4(%sp),%fp0		# fabs w/ ext src
-	rts
-
-	global		_fnegs_
-_fnegs_:
-	fneg.s		0x4(%sp),%fp0		# fneg w/ sgl src
-	rts
-
-	global		_fnegd_
-_fnegd_:
-	fneg.d		0x4(%sp),%fp0		# fneg w/ dbl src
-	rts
-
-	global		_fnegx_
-_fnegx_:
-	fneg.x		0x4(%sp),%fp0		# fneg w/ ext src
-	rts
-
-	global		_fsqrts_
-_fsqrts_:
-	fsqrt.s		0x4(%sp),%fp0		# fsqrt w/ sgl src
-	rts
-
-	global		_fsqrtd_
-_fsqrtd_:
-	fsqrt.d		0x4(%sp),%fp0		# fsqrt w/ dbl src
-	rts
-
-	global		_fsqrtx_
-_fsqrtx_:
-	fsqrt.x		0x4(%sp),%fp0		# fsqrt w/ ext src
-	rts
-
-	global		_fints_
-_fints_:
-	fint.s		0x4(%sp),%fp0		# fint w/ sgl src
-	rts
-
-	global		_fintd_
-_fintd_:
-	fint.d		0x4(%sp),%fp0		# fint w/ dbl src
-	rts
-
-	global		_fintx_
-_fintx_:
-	fint.x		0x4(%sp),%fp0		# fint w/ ext src
-	rts
-
-	global		_fintrzs_
-_fintrzs_:
-	fintrz.s	0x4(%sp),%fp0		# fintrz w/ sgl src
-	rts
-
-	global		_fintrzd_
-_fintrzd_:
-	fintrz.d	0x4(%sp),%fp0		# fintrx w/ dbl src
-	rts
-
-	global		_fintrzx_
-_fintrzx_:
-	fintrz.x	0x4(%sp),%fp0		# fintrz w/ ext src
-	rts
-
-########################################################################
-
-#########################################################################
-# src_zero(): Return signed zero according to sign of src operand.	#
-#########################################################################
-	global		src_zero
-src_zero:
-	tst.b		SRC_EX(%a0)		# get sign of src operand
-	bmi.b		ld_mzero		# if neg, load neg zero
-
-#
-# ld_pzero(): return a positive zero.
-#
-	global		ld_pzero
-ld_pzero:
-	fmov.s		&0x00000000,%fp0	# load +0
-	mov.b		&z_bmask,FPSR_CC(%a6)	# set 'Z' ccode bit
-	rts
-
-# ld_mzero(): return a negative zero.
-	global		ld_mzero
-ld_mzero:
-	fmov.s		&0x80000000,%fp0	# load -0
-	mov.b		&neg_bmask+z_bmask,FPSR_CC(%a6) # set 'N','Z' ccode bits
-	rts
-
-#########################################################################
-# dst_zero(): Return signed zero according to sign of dst operand.	#
-#########################################################################
-	global		dst_zero
-dst_zero:
-	tst.b		DST_EX(%a1)		# get sign of dst operand
-	bmi.b		ld_mzero		# if neg, load neg zero
-	bra.b		ld_pzero		# load positive zero
-
-#########################################################################
-# src_inf(): Return signed inf according to sign of src operand.	#
-#########################################################################
-	global		src_inf
-src_inf:
-	tst.b		SRC_EX(%a0)		# get sign of src operand
-	bmi.b		ld_minf			# if negative branch
-
-#
-# ld_pinf(): return a positive infinity.
-#
-	global		ld_pinf
-ld_pinf:
-	fmov.s		&0x7f800000,%fp0	# load +INF
-	mov.b		&inf_bmask,FPSR_CC(%a6)	# set 'INF' ccode bit
-	rts
-
-#
-# ld_minf():return a negative infinity.
-#
-	global		ld_minf
-ld_minf:
-	fmov.s		&0xff800000,%fp0	# load -INF
-	mov.b		&neg_bmask+inf_bmask,FPSR_CC(%a6) # set 'N','I' ccode bits
-	rts
-
-#########################################################################
-# dst_inf(): Return signed inf according to sign of dst operand.	#
-#########################################################################
-	global		dst_inf
-dst_inf:
-	tst.b		DST_EX(%a1)		# get sign of dst operand
-	bmi.b		ld_minf			# if negative branch
-	bra.b		ld_pinf
-
-	global		szr_inf
-#################################################################
-# szr_inf(): Return +ZERO for a negative src operand or		#
-#	            +INF for a positive src operand.		#
-#	     Routine used for fetox, ftwotox, and ftentox.	#
-#################################################################
-szr_inf:
-	tst.b		SRC_EX(%a0)		# check sign of source
-	bmi.b		ld_pzero
-	bra.b		ld_pinf
-
-#########################################################################
-# sopr_inf(): Return +INF for a positive src operand or			#
-#	      jump to operand error routine for a negative src operand.	#
-#	      Routine used for flogn, flognp1, flog10, and flog2.	#
-#########################################################################
-	global		sopr_inf
-sopr_inf:
-	tst.b		SRC_EX(%a0)		# check sign of source
-	bmi.w		t_operr
-	bra.b		ld_pinf
-
-#################################################################
-# setoxm1i(): Return minus one for a negative src operand or	#
-#	      positive infinity for a positive src operand.	#
-#	      Routine used for fetoxm1.				#
-#################################################################
-	global		setoxm1i
-setoxm1i:
-	tst.b		SRC_EX(%a0)		# check sign of source
-	bmi.b		ld_mone
-	bra.b		ld_pinf
-
-#########################################################################
-# src_one(): Return signed one according to sign of src operand.	#
-#########################################################################
-	global		src_one
-src_one:
-	tst.b		SRC_EX(%a0)		# check sign of source
-	bmi.b		ld_mone
-
-#
-# ld_pone(): return positive one.
-#
-	global		ld_pone
-ld_pone:
-	fmov.s		&0x3f800000,%fp0	# load +1
-	clr.b		FPSR_CC(%a6)
-	rts
-
-#
-# ld_mone(): return negative one.
-#
-	global		ld_mone
-ld_mone:
-	fmov.s		&0xbf800000,%fp0	# load -1
-	mov.b		&neg_bmask,FPSR_CC(%a6)	# set 'N' ccode bit
-	rts
-
-ppiby2:	long		0x3fff0000, 0xc90fdaa2, 0x2168c235
-mpiby2:	long		0xbfff0000, 0xc90fdaa2, 0x2168c235
-
-#################################################################
-# spi_2(): Return signed PI/2 according to sign of src operand.	#
-#################################################################
-	global		spi_2
-spi_2:
-	tst.b		SRC_EX(%a0)		# check sign of source
-	bmi.b		ld_mpi2
-
-#
-# ld_ppi2(): return positive PI/2.
-#
-	global		ld_ppi2
-ld_ppi2:
-	fmov.l		%d0,%fpcr
-	fmov.x		ppiby2(%pc),%fp0	# load +pi/2
-	bra.w		t_pinx2			# set INEX2
-
-#
-# ld_mpi2(): return negative PI/2.
-#
-	global		ld_mpi2
-ld_mpi2:
-	fmov.l		%d0,%fpcr
-	fmov.x		mpiby2(%pc),%fp0	# load -pi/2
-	bra.w		t_minx2			# set INEX2
-
-####################################################
-# The following routines give support for fsincos. #
-####################################################
-
-#
-# ssincosz(): When the src operand is ZERO, store a one in the
-#	      cosine register and return a ZERO in fp0 w/ the same sign
-#	      as the src operand.
-#
-	global		ssincosz
-ssincosz:
-	fmov.s		&0x3f800000,%fp1
-	tst.b		SRC_EX(%a0)		# test sign
-	bpl.b		sincoszp
-	fmov.s		&0x80000000,%fp0	# return sin result in fp0
-	mov.b		&z_bmask+neg_bmask,FPSR_CC(%a6)
-	rts
-sincoszp:
-	fmov.s		&0x00000000,%fp0	# return sin result in fp0
-	mov.b		&z_bmask,FPSR_CC(%a6)
-	rts
-
-#
-# ssincosi(): When the src operand is INF, store a QNAN in the cosine
-#	      register and jump to the operand error routine for negative
-#	      src operands.
-#
-	global		ssincosi
-ssincosi:
-	fmov.x		qnan(%pc),%fp1		# load NAN
-	bra.w		t_operr
-
-#
-# ssincosqnan(): When the src operand is a QNAN, store the QNAN in the cosine
-#		 register and branch to the src QNAN routine.
-#
-	global		ssincosqnan
-ssincosqnan:
-	fmov.x		LOCAL_EX(%a0),%fp1
-	bra.w		src_qnan
-
-########################################################################
-
-	global		smod_sdnrm
-	global		smod_snorm
-smod_sdnrm:
-smod_snorm:
-	mov.b		DTAG(%a6),%d1
-	beq.l		smod
-	cmpi.b		%d1,&ZERO
-	beq.w		smod_zro
-	cmpi.b		%d1,&INF
-	beq.l		t_operr
-	cmpi.b		%d1,&DENORM
-	beq.l		smod
-	bra.l		dst_qnan
-
-	global		smod_szero
-smod_szero:
-	mov.b		DTAG(%a6),%d1
-	beq.l		t_operr
-	cmpi.b		%d1,&ZERO
-	beq.l		t_operr
-	cmpi.b		%d1,&INF
-	beq.l		t_operr
-	cmpi.b		%d1,&DENORM
-	beq.l		t_operr
-	bra.l		dst_qnan
-
-	global		smod_sinf
-smod_sinf:
-	mov.b		DTAG(%a6),%d1
-	beq.l		smod_fpn
-	cmpi.b		%d1,&ZERO
-	beq.l		smod_zro
-	cmpi.b		%d1,&INF
-	beq.l		t_operr
-	cmpi.b		%d1,&DENORM
-	beq.l		smod_fpn
-	bra.l		dst_qnan
-
-smod_zro:
-srem_zro:
-	mov.b		SRC_EX(%a0),%d1		# get src sign
-	mov.b		DST_EX(%a1),%d0		# get dst sign
-	eor.b		%d0,%d1			# get qbyte sign
-	andi.b		&0x80,%d1
-	mov.b		%d1,FPSR_QBYTE(%a6)
-	tst.b		%d0
-	bpl.w		ld_pzero
-	bra.w		ld_mzero
-
-smod_fpn:
-srem_fpn:
-	clr.b		FPSR_QBYTE(%a6)
-	mov.l		%d0,-(%sp)
-	mov.b		SRC_EX(%a0),%d1		# get src sign
-	mov.b		DST_EX(%a1),%d0		# get dst sign
-	eor.b		%d0,%d1			# get qbyte sign
-	andi.b		&0x80,%d1
-	mov.b		%d1,FPSR_QBYTE(%a6)
-	cmpi.b		DTAG(%a6),&DENORM
-	bne.b		smod_nrm
-	lea		DST(%a1),%a0
-	mov.l		(%sp)+,%d0
-	bra		t_resdnrm
-smod_nrm:
-	fmov.l		(%sp)+,%fpcr
-	fmov.x		DST(%a1),%fp0
-	tst.b		DST_EX(%a1)
-	bmi.b		smod_nrm_neg
-	rts
-
-smod_nrm_neg:
-	mov.b		&neg_bmask,FPSR_CC(%a6)	# set 'N' code
-	rts
-
-#########################################################################
-	global		srem_snorm
-	global		srem_sdnrm
-srem_sdnrm:
-srem_snorm:
-	mov.b		DTAG(%a6),%d1
-	beq.l		srem
-	cmpi.b		%d1,&ZERO
-	beq.w		srem_zro
-	cmpi.b		%d1,&INF
-	beq.l		t_operr
-	cmpi.b		%d1,&DENORM
-	beq.l		srem
-	bra.l		dst_qnan
-
-	global		srem_szero
-srem_szero:
-	mov.b		DTAG(%a6),%d1
-	beq.l		t_operr
-	cmpi.b		%d1,&ZERO
-	beq.l		t_operr
-	cmpi.b		%d1,&INF
-	beq.l		t_operr
-	cmpi.b		%d1,&DENORM
-	beq.l		t_operr
-	bra.l		dst_qnan
-
-	global		srem_sinf
-srem_sinf:
-	mov.b		DTAG(%a6),%d1
-	beq.w		srem_fpn
-	cmpi.b		%d1,&ZERO
-	beq.w		srem_zro
-	cmpi.b		%d1,&INF
-	beq.l		t_operr
-	cmpi.b		%d1,&DENORM
-	beq.l		srem_fpn
-	bra.l		dst_qnan
-
-#########################################################################
-
-	global		sscale_snorm
-	global		sscale_sdnrm
-sscale_snorm:
-sscale_sdnrm:
-	mov.b		DTAG(%a6),%d1
-	beq.l		sscale
-	cmpi.b		%d1,&ZERO
-	beq.l		dst_zero
-	cmpi.b		%d1,&INF
-	beq.l		dst_inf
-	cmpi.b		%d1,&DENORM
-	beq.l		sscale
-	bra.l		dst_qnan
-
-	global		sscale_szero
-sscale_szero:
-	mov.b		DTAG(%a6),%d1
-	beq.l		sscale
-	cmpi.b		%d1,&ZERO
-	beq.l		dst_zero
-	cmpi.b		%d1,&INF
-	beq.l		dst_inf
-	cmpi.b		%d1,&DENORM
-	beq.l		sscale
-	bra.l		dst_qnan
-
-	global		sscale_sinf
-sscale_sinf:
-	mov.b		DTAG(%a6),%d1
-	beq.l		t_operr
-	cmpi.b		%d1,&QNAN
-	beq.l		dst_qnan
-	bra.l		t_operr
-
-########################################################################
-
-	global		sop_sqnan
-sop_sqnan:
-	mov.b		DTAG(%a6),%d1
-	cmpi.b		%d1,&QNAN
-	beq.l		dst_qnan
-	bra.l		src_qnan
-
-#########################################################################
-# norm(): normalize the mantissa of an extended precision input. the	#
-#	  input operand should not be normalized already.		#
-#									#
-# XDEF ****************************************************************	#
-#	norm()								#
-#									#
-# XREF **************************************************************** #
-#	none								#
-#									#
-# INPUT *************************************************************** #
-#	a0 = pointer fp extended precision operand to normalize		#
-#									#
-# OUTPUT ************************************************************** #
-#	d0 = number of bit positions the mantissa was shifted		#
-#	a0 = the input operand's mantissa is normalized; the exponent	#
-#	     is unchanged.						#
-#									#
-#########################################################################
-	global		norm
-norm:
-	mov.l		%d2, -(%sp)		# create some temp regs
-	mov.l		%d3, -(%sp)
-
-	mov.l		FTEMP_HI(%a0), %d0	# load hi(mantissa)
-	mov.l		FTEMP_LO(%a0), %d1	# load lo(mantissa)
-
-	bfffo		%d0{&0:&32}, %d2	# how many places to shift?
-	beq.b		norm_lo			# hi(man) is all zeroes!
-
-norm_hi:
-	lsl.l		%d2, %d0		# left shift hi(man)
-	bfextu		%d1{&0:%d2}, %d3	# extract lo bits
-
-	or.l		%d3, %d0		# create hi(man)
-	lsl.l		%d2, %d1		# create lo(man)
-
-	mov.l		%d0, FTEMP_HI(%a0)	# store new hi(man)
-	mov.l		%d1, FTEMP_LO(%a0)	# store new lo(man)
-
-	mov.l		%d2, %d0		# return shift amount
-
-	mov.l		(%sp)+, %d3		# restore temp regs
-	mov.l		(%sp)+, %d2
-
-	rts
-
-norm_lo:
-	bfffo		%d1{&0:&32}, %d2	# how many places to shift?
-	lsl.l		%d2, %d1		# shift lo(man)
-	add.l		&32, %d2		# add 32 to shft amount
-
-	mov.l		%d1, FTEMP_HI(%a0)	# store hi(man)
-	clr.l		FTEMP_LO(%a0)		# lo(man) is now zero
-
-	mov.l		%d2, %d0		# return shift amount
-
-	mov.l		(%sp)+, %d3		# restore temp regs
-	mov.l		(%sp)+, %d2
-
-	rts
-
-#########################################################################
-# unnorm_fix(): - changes an UNNORM to one of NORM, DENORM, or ZERO	#
-#		- returns corresponding optype tag			#
-#									#
-# XDEF ****************************************************************	#
-#	unnorm_fix()							#
-#									#
-# XREF **************************************************************** #
-#	norm() - normalize the mantissa					#
-#									#
-# INPUT *************************************************************** #
-#	a0 = pointer to unnormalized extended precision number		#
-#									#
-# OUTPUT ************************************************************** #
-#	d0 = optype tag - is corrected to one of NORM, DENORM, or ZERO	#
-#	a0 = input operand has been converted to a norm, denorm, or	#
-#	     zero; both the exponent and mantissa are changed.		#
-#									#
-#########################################################################
-
-	global		unnorm_fix
-unnorm_fix:
-	bfffo		FTEMP_HI(%a0){&0:&32}, %d0 # how many shifts are needed?
-	bne.b		unnorm_shift		# hi(man) is not all zeroes
-
-#
-# hi(man) is all zeroes so see if any bits in lo(man) are set
-#
-unnorm_chk_lo:
-	bfffo		FTEMP_LO(%a0){&0:&32}, %d0 # is operand really a zero?
-	beq.w		unnorm_zero		# yes
-
-	add.w		&32, %d0		# no; fix shift distance
-
-#
-# d0 = # shifts needed for complete normalization
-#
-unnorm_shift:
-	clr.l		%d1			# clear top word
-	mov.w		FTEMP_EX(%a0), %d1	# extract exponent
-	and.w		&0x7fff, %d1		# strip off sgn
-
-	cmp.w		%d0, %d1		# will denorm push exp < 0?
-	bgt.b		unnorm_nrm_zero		# yes; denorm only until exp = 0
-
-#
-# exponent would not go < 0. therefore, number stays normalized
-#
-	sub.w		%d0, %d1		# shift exponent value
-	mov.w		FTEMP_EX(%a0), %d0	# load old exponent
-	and.w		&0x8000, %d0		# save old sign
-	or.w		%d0, %d1		# {sgn,new exp}
-	mov.w		%d1, FTEMP_EX(%a0)	# insert new exponent
-
-	bsr.l		norm			# normalize UNNORM
-
-	mov.b		&NORM, %d0		# return new optype tag
-	rts
-
-#
-# exponent would go < 0, so only denormalize until exp = 0
-#
-unnorm_nrm_zero:
-	cmp.b		%d1, &32		# is exp <= 32?
-	bgt.b		unnorm_nrm_zero_lrg	# no; go handle large exponent
-
-	bfextu		FTEMP_HI(%a0){%d1:&32}, %d0 # extract new hi(man)
-	mov.l		%d0, FTEMP_HI(%a0)	# save new hi(man)
-
-	mov.l		FTEMP_LO(%a0), %d0	# fetch old lo(man)
-	lsl.l		%d1, %d0		# extract new lo(man)
-	mov.l		%d0, FTEMP_LO(%a0)	# save new lo(man)
-
-	and.w		&0x8000, FTEMP_EX(%a0)	# set exp = 0
-
-	mov.b		&DENORM, %d0		# return new optype tag
-	rts
-
-#
-# only mantissa bits set are in lo(man)
-#
-unnorm_nrm_zero_lrg:
-	sub.w		&32, %d1		# adjust shft amt by 32
-
-	mov.l		FTEMP_LO(%a0), %d0	# fetch old lo(man)
-	lsl.l		%d1, %d0		# left shift lo(man)
-
-	mov.l		%d0, FTEMP_HI(%a0)	# store new hi(man)
-	clr.l		FTEMP_LO(%a0)		# lo(man) = 0
-
-	and.w		&0x8000, FTEMP_EX(%a0)	# set exp = 0
-
-	mov.b		&DENORM, %d0		# return new optype tag
-	rts
-
-#
-# whole mantissa is zero so this UNNORM is actually a zero
-#
-unnorm_zero:
-	and.w		&0x8000, FTEMP_EX(%a0)	# force exponent to zero
-
-	mov.b		&ZERO, %d0		# fix optype tag
-	rts
diff --git a/ANDROID_3.4.5/arch/m68k/ifpsp060/src/fpsp.S b/ANDROID_3.4.5/arch/m68k/ifpsp060/src/fpsp.S
deleted file mode 100644
index 78cb60f5..00000000
--- a/ANDROID_3.4.5/arch/m68k/ifpsp060/src/fpsp.S
+++ /dev/null
@@ -1,24785 +0,0 @@
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-MOTOROLA MICROPROCESSOR & MEMORY TECHNOLOGY GROUP
-M68000 Hi-Performance Microprocessor Division
-M68060 Software Package
-Production Release P1.00 -- October 10, 1994
-
-M68060 Software Package Copyright © 1993, 1994 Motorola Inc.  All rights reserved.
-
-THE SOFTWARE is provided on an "AS IS" basis and without warranty.
-To the maximum extent permitted by applicable law,
-MOTOROLA DISCLAIMS ALL WARRANTIES WHETHER EXPRESS OR IMPLIED,
-INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
-and any warranty against infringement with regard to the SOFTWARE
-(INCLUDING ANY MODIFIED VERSIONS THEREOF) and any accompanying written materials.
-
-To the maximum extent permitted by applicable law,
-IN NO EVENT SHALL MOTOROLA BE LIABLE FOR ANY DAMAGES WHATSOEVER
-(INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS,
-BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, OR OTHER PECUNIARY LOSS)
-ARISING OF THE USE OR INABILITY TO USE THE SOFTWARE.
-Motorola assumes no responsibility for the maintenance and support of the SOFTWARE.
-
-You are hereby granted a copyright license to use, modify, and distribute the SOFTWARE
-so long as this entire notice is retained without alteration in any modified and/or
-redistributed versions, and that such modified versions are clearly identified as such.
-No licenses are granted by implication, estoppel or otherwise under any patents
-or trademarks of Motorola, Inc.
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-#
-# freal.s:
-#	This file is appended to the top of the 060FPSP package
-# and contains the entry points into the package. The user, in
-# effect, branches to one of the branch table entries located
-# after _060FPSP_TABLE.
-#	Also, subroutine stubs exist in this file (_fpsp_done for
-# example) that are referenced by the FPSP package itself in order
-# to call a given routine. The stub routine actually performs the
-# callout. The FPSP code does a "bsr" to the stub routine. This
-# extra layer of hierarchy adds a slight performance penalty but
-# it makes the FPSP code easier to read and more mainatinable.
-#
-
-set	_off_bsun,	0x00
-set	_off_snan,	0x04
-set	_off_operr,	0x08
-set	_off_ovfl,	0x0c
-set	_off_unfl,	0x10
-set	_off_dz,	0x14
-set	_off_inex,	0x18
-set	_off_fline,	0x1c
-set	_off_fpu_dis,	0x20
-set	_off_trap,	0x24
-set	_off_trace,	0x28
-set	_off_access,	0x2c
-set	_off_done,	0x30
-
-set	_off_imr,	0x40
-set	_off_dmr,	0x44
-set	_off_dmw,	0x48
-set	_off_irw,	0x4c
-set	_off_irl,	0x50
-set	_off_drb,	0x54
-set	_off_drw,	0x58
-set	_off_drl,	0x5c
-set	_off_dwb,	0x60
-set	_off_dww,	0x64
-set	_off_dwl,	0x68
-
-_060FPSP_TABLE:
-
-###############################################################
-
-# Here's the table of ENTRY POINTS for those linking the package.
-	bra.l		_fpsp_snan
-	short		0x0000
-	bra.l		_fpsp_operr
-	short		0x0000
-	bra.l		_fpsp_ovfl
-	short		0x0000
-	bra.l		_fpsp_unfl
-	short		0x0000
-	bra.l		_fpsp_dz
-	short		0x0000
-	bra.l		_fpsp_inex
-	short		0x0000
-	bra.l		_fpsp_fline
-	short		0x0000
-	bra.l		_fpsp_unsupp
-	short		0x0000
-	bra.l		_fpsp_effadd
-	short		0x0000
-
-	space		56
-
-###############################################################
-	global		_fpsp_done
-_fpsp_done:
-	mov.l		%d0,-(%sp)
-	mov.l		(_060FPSP_TABLE-0x80+_off_done,%pc),%d0
-	pea.l		(_060FPSP_TABLE-0x80,%pc,%d0)
-	mov.l		0x4(%sp),%d0
-	rtd		&0x4
-
-	global		_real_ovfl
-_real_ovfl:
-	mov.l		%d0,-(%sp)
-	mov.l		(_060FPSP_TABLE-0x80+_off_ovfl,%pc),%d0
-	pea.l		(_060FPSP_TABLE-0x80,%pc,%d0)
-	mov.l		0x4(%sp),%d0
-	rtd		&0x4
-
-	global		_real_unfl
-_real_unfl:
-	mov.l		%d0,-(%sp)
-	mov.l		(_060FPSP_TABLE-0x80+_off_unfl,%pc),%d0
-	pea.l		(_060FPSP_TABLE-0x80,%pc,%d0)
-	mov.l		0x4(%sp),%d0
-	rtd		&0x4
-
-	global		_real_inex
-_real_inex:
-	mov.l		%d0,-(%sp)
-	mov.l		(_060FPSP_TABLE-0x80+_off_inex,%pc),%d0
-	pea.l		(_060FPSP_TABLE-0x80,%pc,%d0)
-	mov.l		0x4(%sp),%d0
-	rtd		&0x4
-
-	global		_real_bsun
-_real_bsun:
-	mov.l		%d0,-(%sp)
-	mov.l		(_060FPSP_TABLE-0x80+_off_bsun,%pc),%d0
-	pea.l		(_060FPSP_TABLE-0x80,%pc,%d0)
-	mov.l		0x4(%sp),%d0
-	rtd		&0x4
-
-	global		_real_operr
-_real_operr:
-	mov.l		%d0,-(%sp)
-	mov.l		(_060FPSP_TABLE-0x80+_off_operr,%pc),%d0
-	pea.l		(_060FPSP_TABLE-0x80,%pc,%d0)
-	mov.l		0x4(%sp),%d0
-	rtd		&0x4
-
-	global		_real_snan
-_real_snan:
-	mov.l		%d0,-(%sp)
-	mov.l		(_060FPSP_TABLE-0x80+_off_snan,%pc),%d0
-	pea.l		(_060FPSP_TABLE-0x80,%pc,%d0)
-	mov.l		0x4(%sp),%d0
-	rtd		&0x4
-
-	global		_real_dz
-_real_dz:
-	mov.l		%d0,-(%sp)
-	mov.l		(_060FPSP_TABLE-0x80+_off_dz,%pc),%d0
-	pea.l		(_060FPSP_TABLE-0x80,%pc,%d0)
-	mov.l		0x4(%sp),%d0
-	rtd		&0x4
-
-	global		_real_fline
-_real_fline:
-	mov.l		%d0,-(%sp)
-	mov.l		(_060FPSP_TABLE-0x80+_off_fline,%pc),%d0
-	pea.l		(_060FPSP_TABLE-0x80,%pc,%d0)
-	mov.l		0x4(%sp),%d0
-	rtd		&0x4
-
-	global		_real_fpu_disabled
-_real_fpu_disabled:
-	mov.l		%d0,-(%sp)
-	mov.l		(_060FPSP_TABLE-0x80+_off_fpu_dis,%pc),%d0
-	pea.l		(_060FPSP_TABLE-0x80,%pc,%d0)
-	mov.l		0x4(%sp),%d0
-	rtd		&0x4
-
-	global		_real_trap
-_real_trap:
-	mov.l		%d0,-(%sp)
-	mov.l		(_060FPSP_TABLE-0x80+_off_trap,%pc),%d0
-	pea.l		(_060FPSP_TABLE-0x80,%pc,%d0)
-	mov.l		0x4(%sp),%d0
-	rtd		&0x4
-
-	global		_real_trace
-_real_trace:
-	mov.l		%d0,-(%sp)
-	mov.l		(_060FPSP_TABLE-0x80+_off_trace,%pc),%d0
-	pea.l		(_060FPSP_TABLE-0x80,%pc,%d0)
-	mov.l		0x4(%sp),%d0
-	rtd		&0x4
-
-	global		_real_access
-_real_access:
-	mov.l		%d0,-(%sp)
-	mov.l		(_060FPSP_TABLE-0x80+_off_access,%pc),%d0
-	pea.l		(_060FPSP_TABLE-0x80,%pc,%d0)
-	mov.l		0x4(%sp),%d0
-	rtd		&0x4
-
-#######################################
-
-	global		_imem_read
-_imem_read:
-	mov.l		%d0,-(%sp)
-	mov.l		(_060FPSP_TABLE-0x80+_off_imr,%pc),%d0
-	pea.l		(_060FPSP_TABLE-0x80,%pc,%d0)
-	mov.l		0x4(%sp),%d0
-	rtd		&0x4
-
-	global		_dmem_read
-_dmem_read:
-	mov.l		%d0,-(%sp)
-	mov.l		(_060FPSP_TABLE-0x80+_off_dmr,%pc),%d0
-	pea.l		(_060FPSP_TABLE-0x80,%pc,%d0)
-	mov.l		0x4(%sp),%d0
-	rtd		&0x4
-
-	global		_dmem_write
-_dmem_write:
-	mov.l		%d0,-(%sp)
-	mov.l		(_060FPSP_TABLE-0x80+_off_dmw,%pc),%d0
-	pea.l		(_060FPSP_TABLE-0x80,%pc,%d0)
-	mov.l		0x4(%sp),%d0
-	rtd		&0x4
-
-	global		_imem_read_word
-_imem_read_word:
-	mov.l		%d0,-(%sp)
-	mov.l		(_060FPSP_TABLE-0x80+_off_irw,%pc),%d0
-	pea.l		(_060FPSP_TABLE-0x80,%pc,%d0)
-	mov.l		0x4(%sp),%d0
-	rtd		&0x4
-
-	global		_imem_read_long
-_imem_read_long:
-	mov.l		%d0,-(%sp)
-	mov.l		(_060FPSP_TABLE-0x80+_off_irl,%pc),%d0
-	pea.l		(_060FPSP_TABLE-0x80,%pc,%d0)
-	mov.l		0x4(%sp),%d0
-	rtd		&0x4
-
-	global		_dmem_read_byte
-_dmem_read_byte:
-	mov.l		%d0,-(%sp)
-	mov.l		(_060FPSP_TABLE-0x80+_off_drb,%pc),%d0
-	pea.l		(_060FPSP_TABLE-0x80,%pc,%d0)
-	mov.l		0x4(%sp),%d0
-	rtd		&0x4
-
-	global		_dmem_read_word
-_dmem_read_word:
-	mov.l		%d0,-(%sp)
-	mov.l		(_060FPSP_TABLE-0x80+_off_drw,%pc),%d0
-	pea.l		(_060FPSP_TABLE-0x80,%pc,%d0)
-	mov.l		0x4(%sp),%d0
-	rtd		&0x4
-
-	global		_dmem_read_long
-_dmem_read_long:
-	mov.l		%d0,-(%sp)
-	mov.l		(_060FPSP_TABLE-0x80+_off_drl,%pc),%d0
-	pea.l		(_060FPSP_TABLE-0x80,%pc,%d0)
-	mov.l		0x4(%sp),%d0
-	rtd		&0x4
-
-	global		_dmem_write_byte
-_dmem_write_byte:
-	mov.l		%d0,-(%sp)
-	mov.l		(_060FPSP_TABLE-0x80+_off_dwb,%pc),%d0
-	pea.l		(_060FPSP_TABLE-0x80,%pc,%d0)
-	mov.l		0x4(%sp),%d0
-	rtd		&0x4
-
-	global		_dmem_write_word
-_dmem_write_word:
-	mov.l		%d0,-(%sp)
-	mov.l		(_060FPSP_TABLE-0x80+_off_dww,%pc),%d0
-	pea.l		(_060FPSP_TABLE-0x80,%pc,%d0)
-	mov.l		0x4(%sp),%d0
-	rtd		&0x4
-
-	global		_dmem_write_long
-_dmem_write_long:
-	mov.l		%d0,-(%sp)
-	mov.l		(_060FPSP_TABLE-0x80+_off_dwl,%pc),%d0
-	pea.l		(_060FPSP_TABLE-0x80,%pc,%d0)
-	mov.l		0x4(%sp),%d0
-	rtd		&0x4
-
-#
-# This file contains a set of define statements for constants
-# in order to promote readability within the corecode itself.
-#
-
-set LOCAL_SIZE,		192			# stack frame size(bytes)
-set LV,			-LOCAL_SIZE		# stack offset
-
-set EXC_SR,		0x4			# stack status register
-set EXC_PC,		0x6			# stack pc
-set EXC_VOFF,		0xa			# stacked vector offset
-set EXC_EA,		0xc			# stacked <ea>
-
-set EXC_FP,		0x0			# frame pointer
-
-set EXC_AREGS,		-68			# offset of all address regs
-set EXC_DREGS,		-100			# offset of all data regs
-set EXC_FPREGS,		-36			# offset of all fp regs
-
-set EXC_A7,		EXC_AREGS+(7*4)		# offset of saved a7
-set OLD_A7,		EXC_AREGS+(6*4)		# extra copy of saved a7
-set EXC_A6,		EXC_AREGS+(6*4)		# offset of saved a6
-set EXC_A5,		EXC_AREGS+(5*4)
-set EXC_A4,		EXC_AREGS+(4*4)
-set EXC_A3,		EXC_AREGS+(3*4)
-set EXC_A2,		EXC_AREGS+(2*4)
-set EXC_A1,		EXC_AREGS+(1*4)
-set EXC_A0,		EXC_AREGS+(0*4)
-set EXC_D7,		EXC_DREGS+(7*4)
-set EXC_D6,		EXC_DREGS+(6*4)
-set EXC_D5,		EXC_DREGS+(5*4)
-set EXC_D4,		EXC_DREGS+(4*4)
-set EXC_D3,		EXC_DREGS+(3*4)
-set EXC_D2,		EXC_DREGS+(2*4)
-set EXC_D1,		EXC_DREGS+(1*4)
-set EXC_D0,		EXC_DREGS+(0*4)
-
-set EXC_FP0,		EXC_FPREGS+(0*12)	# offset of saved fp0
-set EXC_FP1,		EXC_FPREGS+(1*12)	# offset of saved fp1
-set EXC_FP2,		EXC_FPREGS+(2*12)	# offset of saved fp2 (not used)
-
-set FP_SCR1,		LV+80			# fp scratch 1
-set FP_SCR1_EX,		FP_SCR1+0
-set FP_SCR1_SGN,	FP_SCR1+2
-set FP_SCR1_HI,		FP_SCR1+4
-set FP_SCR1_LO,		FP_SCR1+8
-
-set FP_SCR0,		LV+68			# fp scratch 0
-set FP_SCR0_EX,		FP_SCR0+0
-set FP_SCR0_SGN,	FP_SCR0+2
-set FP_SCR0_HI,		FP_SCR0+4
-set FP_SCR0_LO,		FP_SCR0+8
-
-set FP_DST,		LV+56			# fp destination operand
-set FP_DST_EX,		FP_DST+0
-set FP_DST_SGN,		FP_DST+2
-set FP_DST_HI,		FP_DST+4
-set FP_DST_LO,		FP_DST+8
-
-set FP_SRC,		LV+44			# fp source operand
-set FP_SRC_EX,		FP_SRC+0
-set FP_SRC_SGN,		FP_SRC+2
-set FP_SRC_HI,		FP_SRC+4
-set FP_SRC_LO,		FP_SRC+8
-
-set USER_FPIAR,		LV+40			# FP instr address register
-
-set USER_FPSR,		LV+36			# FP status register
-set FPSR_CC,		USER_FPSR+0		# FPSR condition codes
-set FPSR_QBYTE,		USER_FPSR+1		# FPSR qoutient byte
-set FPSR_EXCEPT,	USER_FPSR+2		# FPSR exception status byte
-set FPSR_AEXCEPT,	USER_FPSR+3		# FPSR accrued exception byte
-
-set USER_FPCR,		LV+32			# FP control register
-set FPCR_ENABLE,	USER_FPCR+2		# FPCR exception enable
-set FPCR_MODE,		USER_FPCR+3		# FPCR rounding mode control
-
-set L_SCR3,		LV+28			# integer scratch 3
-set L_SCR2,		LV+24			# integer scratch 2
-set L_SCR1,		LV+20			# integer scratch 1
-
-set STORE_FLG,		LV+19			# flag: operand store (ie. not fcmp/ftst)
-
-set EXC_TEMP2,		LV+24			# temporary space
-set EXC_TEMP,		LV+16			# temporary space
-
-set DTAG,		LV+15			# destination operand type
-set STAG,		LV+14			# source operand type
-
-set SPCOND_FLG,		LV+10			# flag: special case (see below)
-
-set EXC_CC,		LV+8			# saved condition codes
-set EXC_EXTWPTR,	LV+4			# saved current PC (active)
-set EXC_EXTWORD,	LV+2			# saved extension word
-set EXC_CMDREG,		LV+2			# saved extension word
-set EXC_OPWORD,		LV+0			# saved operation word
-
-################################
-
-# Helpful macros
-
-set FTEMP,		0			# offsets within an
-set FTEMP_EX,		0			# extended precision
-set FTEMP_SGN,		2			# value saved in memory.
-set FTEMP_HI,		4
-set FTEMP_LO,		8
-set FTEMP_GRS,		12
-
-set LOCAL,		0			# offsets within an
-set LOCAL_EX,		0			# extended precision
-set LOCAL_SGN,		2			# value saved in memory.
-set LOCAL_HI,		4
-set LOCAL_LO,		8
-set LOCAL_GRS,		12
-
-set DST,		0			# offsets within an
-set DST_EX,		0			# extended precision
-set DST_HI,		4			# value saved in memory.
-set DST_LO,		8
-
-set SRC,		0			# offsets within an
-set SRC_EX,		0			# extended precision
-set SRC_HI,		4			# value saved in memory.
-set SRC_LO,		8
-
-set SGL_LO,		0x3f81			# min sgl prec exponent
-set SGL_HI,		0x407e			# max sgl prec exponent
-set DBL_LO,		0x3c01			# min dbl prec exponent
-set DBL_HI,		0x43fe			# max dbl prec exponent
-set EXT_LO,		0x0			# min ext prec exponent
-set EXT_HI,		0x7ffe			# max ext prec exponent
-
-set EXT_BIAS,		0x3fff			# extended precision bias
-set SGL_BIAS,		0x007f			# single precision bias
-set DBL_BIAS,		0x03ff			# double precision bias
-
-set NORM,		0x00			# operand type for STAG/DTAG
-set ZERO,		0x01			# operand type for STAG/DTAG
-set INF,		0x02			# operand type for STAG/DTAG
-set QNAN,		0x03			# operand type for STAG/DTAG
-set DENORM,		0x04			# operand type for STAG/DTAG
-set SNAN,		0x05			# operand type for STAG/DTAG
-set UNNORM,		0x06			# operand type for STAG/DTAG
-
-##################
-# FPSR/FPCR bits #
-##################
-set neg_bit,		0x3			# negative result
-set z_bit,		0x2			# zero result
-set inf_bit,		0x1			# infinite result
-set nan_bit,		0x0			# NAN result
-
-set q_sn_bit,		0x7			# sign bit of quotient byte
-
-set bsun_bit,		7			# branch on unordered
-set snan_bit,		6			# signalling NAN
-set operr_bit,		5			# operand error
-set ovfl_bit,		4			# overflow
-set unfl_bit,		3			# underflow
-set dz_bit,		2			# divide by zero
-set inex2_bit,		1			# inexact result 2
-set inex1_bit,		0			# inexact result 1
-
-set aiop_bit,		7			# accrued inexact operation bit
-set aovfl_bit,		6			# accrued overflow bit
-set aunfl_bit,		5			# accrued underflow bit
-set adz_bit,		4			# accrued dz bit
-set ainex_bit,		3			# accrued inexact bit
-
-#############################
-# FPSR individual bit masks #
-#############################
-set neg_mask,		0x08000000		# negative bit mask (lw)
-set inf_mask,		0x02000000		# infinity bit mask (lw)
-set z_mask,		0x04000000		# zero bit mask (lw)
-set nan_mask,		0x01000000		# nan bit mask (lw)
-
-set neg_bmask,		0x08			# negative bit mask (byte)
-set inf_bmask,		0x02			# infinity bit mask (byte)
-set z_bmask,		0x04			# zero bit mask (byte)
-set nan_bmask,		0x01			# nan bit mask (byte)
-
-set bsun_mask,		0x00008000		# bsun exception mask
-set snan_mask,		0x00004000		# snan exception mask
-set operr_mask,		0x00002000		# operr exception mask
-set ovfl_mask,		0x00001000		# overflow exception mask
-set unfl_mask,		0x00000800		# underflow exception mask
-set dz_mask,		0x00000400		# dz exception mask
-set inex2_mask,		0x00000200		# inex2 exception mask
-set inex1_mask,		0x00000100		# inex1 exception mask
-
-set aiop_mask,		0x00000080		# accrued illegal operation
-set aovfl_mask,		0x00000040		# accrued overflow
-set aunfl_mask,		0x00000020		# accrued underflow
-set adz_mask,		0x00000010		# accrued divide by zero
-set ainex_mask,		0x00000008		# accrued inexact
-
-######################################
-# FPSR combinations used in the FPSP #
-######################################
-set dzinf_mask,		inf_mask+dz_mask+adz_mask
-set opnan_mask,		nan_mask+operr_mask+aiop_mask
-set nzi_mask,		0x01ffffff		#clears N, Z, and I
-set unfinx_mask,	unfl_mask+inex2_mask+aunfl_mask+ainex_mask
-set unf2inx_mask,	unfl_mask+inex2_mask+ainex_mask
-set ovfinx_mask,	ovfl_mask+inex2_mask+aovfl_mask+ainex_mask
-set inx1a_mask,		inex1_mask+ainex_mask
-set inx2a_mask,		inex2_mask+ainex_mask
-set snaniop_mask,	nan_mask+snan_mask+aiop_mask
-set snaniop2_mask,	snan_mask+aiop_mask
-set naniop_mask,	nan_mask+aiop_mask
-set neginf_mask,	neg_mask+inf_mask
-set infaiop_mask,	inf_mask+aiop_mask
-set negz_mask,		neg_mask+z_mask
-set opaop_mask,		operr_mask+aiop_mask
-set unfl_inx_mask,	unfl_mask+aunfl_mask+ainex_mask
-set ovfl_inx_mask,	ovfl_mask+aovfl_mask+ainex_mask
-
-#########
-# misc. #
-#########
-set rnd_stky_bit,	29			# stky bit pos in longword
-
-set sign_bit,		0x7			# sign bit
-set signan_bit,		0x6			# signalling nan bit
-
-set sgl_thresh,		0x3f81			# minimum sgl exponent
-set dbl_thresh,		0x3c01			# minimum dbl exponent
-
-set x_mode,		0x0			# extended precision
-set s_mode,		0x4			# single precision
-set d_mode,		0x8			# double precision
-
-set rn_mode,		0x0			# round-to-nearest
-set rz_mode,		0x1			# round-to-zero
-set rm_mode,		0x2			# round-tp-minus-infinity
-set rp_mode,		0x3			# round-to-plus-infinity
-
-set mantissalen,	64			# length of mantissa in bits
-
-set BYTE,		1			# len(byte) == 1 byte
-set WORD,		2			# len(word) == 2 bytes
-set LONG,		4			# len(longword) == 2 bytes
-
-set BSUN_VEC,		0xc0			# bsun    vector offset
-set INEX_VEC,		0xc4			# inexact vector offset
-set DZ_VEC,		0xc8			# dz      vector offset
-set UNFL_VEC,		0xcc			# unfl    vector offset
-set OPERR_VEC,		0xd0			# operr   vector offset
-set OVFL_VEC,		0xd4			# ovfl    vector offset
-set SNAN_VEC,		0xd8			# snan    vector offset
-
-###########################
-# SPecial CONDition FLaGs #
-###########################
-set ftrapcc_flg,	0x01			# flag bit: ftrapcc exception
-set fbsun_flg,		0x02			# flag bit: bsun exception
-set mia7_flg,		0x04			# flag bit: (a7)+ <ea>
-set mda7_flg,		0x08			# flag bit: -(a7) <ea>
-set fmovm_flg,		0x40			# flag bit: fmovm instruction
-set immed_flg,		0x80			# flag bit: &<data> <ea>
-
-set ftrapcc_bit,	0x0
-set fbsun_bit,		0x1
-set mia7_bit,		0x2
-set mda7_bit,		0x3
-set immed_bit,		0x7
-
-##################################
-# TRANSCENDENTAL "LAST-OP" FLAGS #
-##################################
-set FMUL_OP,		0x0			# fmul instr performed last
-set FDIV_OP,		0x1			# fdiv performed last
-set FADD_OP,		0x2			# fadd performed last
-set FMOV_OP,		0x3			# fmov performed last
-
-#############
-# CONSTANTS #
-#############
-T1:	long		0x40C62D38,0xD3D64634	# 16381 LOG2 LEAD
-T2:	long		0x3D6F90AE,0xB1E75CC7	# 16381 LOG2 TRAIL
-
-PI:	long		0x40000000,0xC90FDAA2,0x2168C235,0x00000000
-PIBY2:	long		0x3FFF0000,0xC90FDAA2,0x2168C235,0x00000000
-
-TWOBYPI:
-	long		0x3FE45F30,0x6DC9C883
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	_fpsp_ovfl(): 060FPSP entry point for FP Overflow exception.	#
-#									#
-#	This handler should be the first code executed upon taking the	#
-#	FP Overflow exception in an operating system.			#
-#									#
-# XREF ****************************************************************	#
-#	_imem_read_long() - read instruction longword			#
-#	fix_skewed_ops() - adjust src operand in fsave frame		#
-#	set_tag_x() - determine optype of src/dst operands		#
-#	store_fpreg() - store opclass 0 or 2 result to FP regfile	#
-#	unnorm_fix() - change UNNORM operands to NORM or ZERO		#
-#	load_fpn2() - load dst operand from FP regfile			#
-#	fout() - emulate an opclass 3 instruction			#
-#	tbl_unsupp - add of table of emulation routines for opclass 0,2	#
-#	_fpsp_done() - "callout" for 060FPSP exit (all work done!)	#
-#	_real_ovfl() - "callout" for Overflow exception enabled code	#
-#	_real_inex() - "callout" for Inexact exception enabled code	#
-#	_real_trace() - "callout" for Trace exception code		#
-#									#
-# INPUT ***************************************************************	#
-#	- The system stack contains the FP Ovfl exception stack frame	#
-#	- The fsave frame contains the source operand			#
-#									#
-# OUTPUT **************************************************************	#
-#	Overflow Exception enabled:					#
-#	- The system stack is unchanged					#
-#	- The fsave frame contains the adjusted src op for opclass 0,2	#
-#	Overflow Exception disabled:					#
-#	- The system stack is unchanged					#
-#	- The "exception present" flag in the fsave frame is cleared	#
-#									#
-# ALGORITHM ***********************************************************	#
-#	On the 060, if an FP overflow is present as the result of any	#
-# instruction, the 060 will take an overflow exception whether the	#
-# exception is enabled or disabled in the FPCR. For the disabled case,	#
-# This handler emulates the instruction to determine what the correct	#
-# default result should be for the operation. This default result is	#
-# then stored in either the FP regfile, data regfile, or memory.	#
-# Finally, the handler exits through the "callout" _fpsp_done()		#
-# denoting that no exceptional conditions exist within the machine.	#
-#	If the exception is enabled, then this handler must create the	#
-# exceptional operand and plave it in the fsave state frame, and store	#
-# the default result (only if the instruction is opclass 3). For	#
-# exceptions enabled, this handler must exit through the "callout"	#
-# _real_ovfl() so that the operating system enabled overflow handler	#
-# can handle this case.							#
-#	Two other conditions exist. First, if overflow was disabled	#
-# but the inexact exception was enabled, this handler must exit		#
-# through the "callout" _real_inex() regardless of whether the result	#
-# was inexact.								#
-#	Also, in the case of an opclass three instruction where		#
-# overflow was disabled and the trace exception was enabled, this	#
-# handler must exit through the "callout" _real_trace().		#
-#									#
-#########################################################################
-
-	global		_fpsp_ovfl
-_fpsp_ovfl:
-
-#$#	sub.l		&24,%sp			# make room for src/dst
-
-	link.w		%a6,&-LOCAL_SIZE	# init stack frame
-
-	fsave		FP_SRC(%a6)		# grab the "busy" frame
-
-	movm.l		&0x0303,EXC_DREGS(%a6)	# save d0-d1/a0-a1
-	fmovm.l		%fpcr,%fpsr,%fpiar,USER_FPCR(%a6) # save ctrl regs
-	fmovm.x		&0xc0,EXC_FPREGS(%a6)	# save fp0-fp1 on stack
-
-# the FPIAR holds the "current PC" of the faulting instruction
-	mov.l		USER_FPIAR(%a6),EXC_EXTWPTR(%a6)
-	mov.l		EXC_EXTWPTR(%a6),%a0	# fetch instruction addr
-	addq.l		&0x4,EXC_EXTWPTR(%a6)	# incr instruction ptr
-	bsr.l		_imem_read_long		# fetch the instruction words
-	mov.l		%d0,EXC_OPWORD(%a6)
-
-##############################################################################
-
-	btst		&0x5,EXC_CMDREG(%a6)	# is instr an fmove out?
-	bne.w		fovfl_out
-
-
-	lea		FP_SRC(%a6),%a0		# pass: ptr to src op
-	bsr.l		fix_skewed_ops		# fix src op
-
-# since, I believe, only NORMs and DENORMs can come through here,
-# maybe we can avoid the subroutine call.
-	lea		FP_SRC(%a6),%a0		# pass: ptr to src op
-	bsr.l		set_tag_x		# tag the operand type
-	mov.b		%d0,STAG(%a6)		# maybe NORM,DENORM
-
-# bit five of the fp extension word separates the monadic and dyadic operations
-# that can pass through fpsp_ovfl(). remember that fcmp, ftst, and fsincos
-# will never take this exception.
-	btst		&0x5,1+EXC_CMDREG(%a6)	# is operation monadic or dyadic?
-	beq.b		fovfl_extract		# monadic
-
-	bfextu		EXC_CMDREG(%a6){&6:&3},%d0 # dyadic; load dst reg
-	bsr.l		load_fpn2		# load dst into FP_DST
-
-	lea		FP_DST(%a6),%a0		# pass: ptr to dst op
-	bsr.l		set_tag_x		# tag the operand type
-	cmpi.b		%d0,&UNNORM		# is operand an UNNORM?
-	bne.b		fovfl_op2_done		# no
-	bsr.l		unnorm_fix		# yes; convert to NORM,DENORM,or ZERO
-fovfl_op2_done:
-	mov.b		%d0,DTAG(%a6)		# save dst optype tag
-
-fovfl_extract:
-
-#$#	mov.l		FP_SRC_EX(%a6),TRAP_SRCOP_EX(%a6)
-#$#	mov.l		FP_SRC_HI(%a6),TRAP_SRCOP_HI(%a6)
-#$#	mov.l		FP_SRC_LO(%a6),TRAP_SRCOP_LO(%a6)
-#$#	mov.l		FP_DST_EX(%a6),TRAP_DSTOP_EX(%a6)
-#$#	mov.l		FP_DST_HI(%a6),TRAP_DSTOP_HI(%a6)
-#$#	mov.l		FP_DST_LO(%a6),TRAP_DSTOP_LO(%a6)
-
-	clr.l		%d0
-	mov.b		FPCR_MODE(%a6),%d0	# pass rnd prec/mode
-
-	mov.b		1+EXC_CMDREG(%a6),%d1
-	andi.w		&0x007f,%d1		# extract extension
-
-	andi.l		&0x00ff01ff,USER_FPSR(%a6) # zero all but accured field
-
-	fmov.l		&0x0,%fpcr		# zero current control regs
-	fmov.l		&0x0,%fpsr
-
-	lea		FP_SRC(%a6),%a0
-	lea		FP_DST(%a6),%a1
-
-# maybe we can make these entry points ONLY the OVFL entry points of each routine.
-	mov.l		(tbl_unsupp.l,%pc,%d1.w*4),%d1 # fetch routine addr
-	jsr		(tbl_unsupp.l,%pc,%d1.l*1)
-
-# the operation has been emulated. the result is in fp0.
-# the EXOP, if an exception occurred, is in fp1.
-# we must save the default result regardless of whether
-# traps are enabled or disabled.
-	bfextu		EXC_CMDREG(%a6){&6:&3},%d0
-	bsr.l		store_fpreg
-
-# the exceptional possibilities we have left ourselves with are ONLY overflow
-# and inexact. and, the inexact is such that overflow occurred and was disabled
-# but inexact was enabled.
-	btst		&ovfl_bit,FPCR_ENABLE(%a6)
-	bne.b		fovfl_ovfl_on
-
-	btst		&inex2_bit,FPCR_ENABLE(%a6)
-	bne.b		fovfl_inex_on
-
-	fmovm.x		EXC_FPREGS(%a6),&0xc0	# restore fp0-fp1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-
-	unlk		%a6
-#$#	add.l		&24,%sp
-	bra.l		_fpsp_done
-
-# overflow is enabled AND overflow, of course, occurred. so, we have the EXOP
-# in fp1. now, simply jump to _real_ovfl()!
-fovfl_ovfl_on:
-	fmovm.x		&0x40,FP_SRC(%a6)	# save EXOP (fp1) to stack
-
-	mov.w		&0xe005,2+FP_SRC(%a6)	# save exc status
-
-	fmovm.x		EXC_FPREGS(%a6),&0xc0	# restore fp0-fp1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-
-	frestore	FP_SRC(%a6)		# do this after fmovm,other f<op>s!
-
-	unlk		%a6
-
-	bra.l		_real_ovfl
-
-# overflow occurred but is disabled. meanwhile, inexact is enabled. Therefore,
-# we must jump to real_inex().
-fovfl_inex_on:
-
-	fmovm.x		&0x40,FP_SRC(%a6)	# save EXOP (fp1) to stack
-
-	mov.b		&0xc4,1+EXC_VOFF(%a6)	# vector offset = 0xc4
-	mov.w		&0xe001,2+FP_SRC(%a6)	# save exc status
-
-	fmovm.x		EXC_FPREGS(%a6),&0xc0	# restore fp0-fp1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-
-	frestore	FP_SRC(%a6)		# do this after fmovm,other f<op>s!
-
-	unlk		%a6
-
-	bra.l		_real_inex
-
-########################################################################
-fovfl_out:
-
-
-#$#	mov.l		FP_SRC_EX(%a6),TRAP_SRCOP_EX(%a6)
-#$#	mov.l		FP_SRC_HI(%a6),TRAP_SRCOP_HI(%a6)
-#$#	mov.l		FP_SRC_LO(%a6),TRAP_SRCOP_LO(%a6)
-
-# the src operand is definitely a NORM(!), so tag it as such
-	mov.b		&NORM,STAG(%a6)		# set src optype tag
-
-	clr.l		%d0
-	mov.b		FPCR_MODE(%a6),%d0	# pass rnd prec/mode
-
-	and.l		&0xffff00ff,USER_FPSR(%a6) # zero all but accured field
-
-	fmov.l		&0x0,%fpcr		# zero current control regs
-	fmov.l		&0x0,%fpsr
-
-	lea		FP_SRC(%a6),%a0		# pass ptr to src operand
-
-	bsr.l		fout
-
-	btst		&ovfl_bit,FPCR_ENABLE(%a6)
-	bne.w		fovfl_ovfl_on
-
-	btst		&inex2_bit,FPCR_ENABLE(%a6)
-	bne.w		fovfl_inex_on
-
-	fmovm.x		EXC_FPREGS(%a6),&0xc0	# restore fp0-fp1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-
-	unlk		%a6
-#$#	add.l		&24,%sp
-
-	btst		&0x7,(%sp)		# is trace on?
-	beq.l		_fpsp_done		# no
-
-	fmov.l		%fpiar,0x8(%sp)		# "Current PC" is in FPIAR
-	mov.w		&0x2024,0x6(%sp)	# stk fmt = 0x2; voff = 0x024
-	bra.l		_real_trace
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	_fpsp_unfl(): 060FPSP entry point for FP Underflow exception.	#
-#									#
-#	This handler should be the first code executed upon taking the	#
-#	FP Underflow exception in an operating system.			#
-#									#
-# XREF ****************************************************************	#
-#	_imem_read_long() - read instruction longword			#
-#	fix_skewed_ops() - adjust src operand in fsave frame		#
-#	set_tag_x() - determine optype of src/dst operands		#
-#	store_fpreg() - store opclass 0 or 2 result to FP regfile	#
-#	unnorm_fix() - change UNNORM operands to NORM or ZERO		#
-#	load_fpn2() - load dst operand from FP regfile			#
-#	fout() - emulate an opclass 3 instruction			#
-#	tbl_unsupp - add of table of emulation routines for opclass 0,2	#
-#	_fpsp_done() - "callout" for 060FPSP exit (all work done!)	#
-#	_real_ovfl() - "callout" for Overflow exception enabled code	#
-#	_real_inex() - "callout" for Inexact exception enabled code	#
-#	_real_trace() - "callout" for Trace exception code		#
-#									#
-# INPUT ***************************************************************	#
-#	- The system stack contains the FP Unfl exception stack frame	#
-#	- The fsave frame contains the source operand			#
-#									#
-# OUTPUT **************************************************************	#
-#	Underflow Exception enabled:					#
-#	- The system stack is unchanged					#
-#	- The fsave frame contains the adjusted src op for opclass 0,2	#
-#	Underflow Exception disabled:					#
-#	- The system stack is unchanged					#
-#	- The "exception present" flag in the fsave frame is cleared	#
-#									#
-# ALGORITHM ***********************************************************	#
-#	On the 060, if an FP underflow is present as the result of any	#
-# instruction, the 060 will take an underflow exception whether the	#
-# exception is enabled or disabled in the FPCR. For the disabled case,	#
-# This handler emulates the instruction to determine what the correct	#
-# default result should be for the operation. This default result is	#
-# then stored in either the FP regfile, data regfile, or memory.	#
-# Finally, the handler exits through the "callout" _fpsp_done()		#
-# denoting that no exceptional conditions exist within the machine.	#
-#	If the exception is enabled, then this handler must create the	#
-# exceptional operand and plave it in the fsave state frame, and store	#
-# the default result (only if the instruction is opclass 3). For	#
-# exceptions enabled, this handler must exit through the "callout"	#
-# _real_unfl() so that the operating system enabled overflow handler	#
-# can handle this case.							#
-#	Two other conditions exist. First, if underflow was disabled	#
-# but the inexact exception was enabled and the result was inexact,	#
-# this handler must exit through the "callout" _real_inex().		#
-# was inexact.								#
-#	Also, in the case of an opclass three instruction where		#
-# underflow was disabled and the trace exception was enabled, this	#
-# handler must exit through the "callout" _real_trace().		#
-#									#
-#########################################################################
-
-	global		_fpsp_unfl
-_fpsp_unfl:
-
-#$#	sub.l		&24,%sp			# make room for src/dst
-
-	link.w		%a6,&-LOCAL_SIZE	# init stack frame
-
-	fsave		FP_SRC(%a6)		# grab the "busy" frame
-
-	movm.l		&0x0303,EXC_DREGS(%a6)	# save d0-d1/a0-a1
-	fmovm.l		%fpcr,%fpsr,%fpiar,USER_FPCR(%a6) # save ctrl regs
-	fmovm.x		&0xc0,EXC_FPREGS(%a6)	# save fp0-fp1 on stack
-
-# the FPIAR holds the "current PC" of the faulting instruction
-	mov.l		USER_FPIAR(%a6),EXC_EXTWPTR(%a6)
-	mov.l		EXC_EXTWPTR(%a6),%a0	# fetch instruction addr
-	addq.l		&0x4,EXC_EXTWPTR(%a6)	# incr instruction ptr
-	bsr.l		_imem_read_long		# fetch the instruction words
-	mov.l		%d0,EXC_OPWORD(%a6)
-
-##############################################################################
-
-	btst		&0x5,EXC_CMDREG(%a6)	# is instr an fmove out?
-	bne.w		funfl_out
-
-
-	lea		FP_SRC(%a6),%a0		# pass: ptr to src op
-	bsr.l		fix_skewed_ops		# fix src op
-
-	lea		FP_SRC(%a6),%a0		# pass: ptr to src op
-	bsr.l		set_tag_x		# tag the operand type
-	mov.b		%d0,STAG(%a6)		# maybe NORM,DENORM
-
-# bit five of the fp ext word separates the monadic and dyadic operations
-# that can pass through fpsp_unfl(). remember that fcmp, and ftst
-# will never take this exception.
-	btst		&0x5,1+EXC_CMDREG(%a6)	# is op monadic or dyadic?
-	beq.b		funfl_extract		# monadic
-
-# now, what's left that's not dyadic is fsincos. we can distinguish it
-# from all dyadics by the '0110xxx pattern
-	btst		&0x4,1+EXC_CMDREG(%a6)	# is op an fsincos?
-	bne.b		funfl_extract		# yes
-
-	bfextu		EXC_CMDREG(%a6){&6:&3},%d0 # dyadic; load dst reg
-	bsr.l		load_fpn2		# load dst into FP_DST
-
-	lea		FP_DST(%a6),%a0		# pass: ptr to dst op
-	bsr.l		set_tag_x		# tag the operand type
-	cmpi.b		%d0,&UNNORM		# is operand an UNNORM?
-	bne.b		funfl_op2_done		# no
-	bsr.l		unnorm_fix		# yes; convert to NORM,DENORM,or ZERO
-funfl_op2_done:
-	mov.b		%d0,DTAG(%a6)		# save dst optype tag
-
-funfl_extract:
-
-#$#	mov.l		FP_SRC_EX(%a6),TRAP_SRCOP_EX(%a6)
-#$#	mov.l		FP_SRC_HI(%a6),TRAP_SRCOP_HI(%a6)
-#$#	mov.l		FP_SRC_LO(%a6),TRAP_SRCOP_LO(%a6)
-#$#	mov.l		FP_DST_EX(%a6),TRAP_DSTOP_EX(%a6)
-#$#	mov.l		FP_DST_HI(%a6),TRAP_DSTOP_HI(%a6)
-#$#	mov.l		FP_DST_LO(%a6),TRAP_DSTOP_LO(%a6)
-
-	clr.l		%d0
-	mov.b		FPCR_MODE(%a6),%d0	# pass rnd prec/mode
-
-	mov.b		1+EXC_CMDREG(%a6),%d1
-	andi.w		&0x007f,%d1		# extract extension
-
-	andi.l		&0x00ff01ff,USER_FPSR(%a6)
-
-	fmov.l		&0x0,%fpcr		# zero current control regs
-	fmov.l		&0x0,%fpsr
-
-	lea		FP_SRC(%a6),%a0
-	lea		FP_DST(%a6),%a1
-
-# maybe we can make these entry points ONLY the OVFL entry points of each routine.
-	mov.l		(tbl_unsupp.l,%pc,%d1.w*4),%d1 # fetch routine addr
-	jsr		(tbl_unsupp.l,%pc,%d1.l*1)
-
-	bfextu		EXC_CMDREG(%a6){&6:&3},%d0
-	bsr.l		store_fpreg
-
-# The `060 FPU multiplier hardware is such that if the result of a
-# multiply operation is the smallest possible normalized number
-# (0x00000000_80000000_00000000), then the machine will take an
-# underflow exception. Since this is incorrect, we need to check
-# if our emulation, after re-doing the operation, decided that
-# no underflow was called for. We do these checks only in
-# funfl_{unfl,inex}_on() because w/ both exceptions disabled, this
-# special case will simply exit gracefully with the correct result.
-
-# the exceptional possibilities we have left ourselves with are ONLY overflow
-# and inexact. and, the inexact is such that overflow occurred and was disabled
-# but inexact was enabled.
-	btst		&unfl_bit,FPCR_ENABLE(%a6)
-	bne.b		funfl_unfl_on
-
-funfl_chkinex:
-	btst		&inex2_bit,FPCR_ENABLE(%a6)
-	bne.b		funfl_inex_on
-
-funfl_exit:
-	fmovm.x		EXC_FPREGS(%a6),&0xc0	# restore fp0-fp1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-
-	unlk		%a6
-#$#	add.l		&24,%sp
-	bra.l		_fpsp_done
-
-# overflow is enabled AND overflow, of course, occurred. so, we have the EXOP
-# in fp1 (don't forget to save fp0). what to do now?
-# well, we simply have to get to go to _real_unfl()!
-funfl_unfl_on:
-
-# The `060 FPU multiplier hardware is such that if the result of a
-# multiply operation is the smallest possible normalized number
-# (0x00000000_80000000_00000000), then the machine will take an
-# underflow exception. Since this is incorrect, we check here to see
-# if our emulation, after re-doing the operation, decided that
-# no underflow was called for.
-	btst		&unfl_bit,FPSR_EXCEPT(%a6)
-	beq.w		funfl_chkinex
-
-funfl_unfl_on2:
-	fmovm.x		&0x40,FP_SRC(%a6)	# save EXOP (fp1) to stack
-
-	mov.w		&0xe003,2+FP_SRC(%a6)	# save exc status
-
-	fmovm.x		EXC_FPREGS(%a6),&0xc0	# restore fp0-fp1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-
-	frestore	FP_SRC(%a6)		# do this after fmovm,other f<op>s!
-
-	unlk		%a6
-
-	bra.l		_real_unfl
-
-# underflow occurred but is disabled. meanwhile, inexact is enabled. Therefore,
-# we must jump to real_inex().
-funfl_inex_on:
-
-# The `060 FPU multiplier hardware is such that if the result of a
-# multiply operation is the smallest possible normalized number
-# (0x00000000_80000000_00000000), then the machine will take an
-# underflow exception.
-# But, whether bogus or not, if inexact is enabled AND it occurred,
-# then we have to branch to real_inex.
-
-	btst		&inex2_bit,FPSR_EXCEPT(%a6)
-	beq.w		funfl_exit
-
-funfl_inex_on2:
-
-	fmovm.x		&0x40,FP_SRC(%a6)	# save EXOP to stack
-
-	mov.b		&0xc4,1+EXC_VOFF(%a6)	# vector offset = 0xc4
-	mov.w		&0xe001,2+FP_SRC(%a6)	# save exc status
-
-	fmovm.x		EXC_FPREGS(%a6),&0xc0	# restore fp0-fp1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-
-	frestore	FP_SRC(%a6)		# do this after fmovm,other f<op>s!
-
-	unlk		%a6
-
-	bra.l		_real_inex
-
-#######################################################################
-funfl_out:
-
-
-#$#	mov.l		FP_SRC_EX(%a6),TRAP_SRCOP_EX(%a6)
-#$#	mov.l		FP_SRC_HI(%a6),TRAP_SRCOP_HI(%a6)
-#$#	mov.l		FP_SRC_LO(%a6),TRAP_SRCOP_LO(%a6)
-
-# the src operand is definitely a NORM(!), so tag it as such
-	mov.b		&NORM,STAG(%a6)		# set src optype tag
-
-	clr.l		%d0
-	mov.b		FPCR_MODE(%a6),%d0	# pass rnd prec/mode
-
-	and.l		&0xffff00ff,USER_FPSR(%a6) # zero all but accured field
-
-	fmov.l		&0x0,%fpcr		# zero current control regs
-	fmov.l		&0x0,%fpsr
-
-	lea		FP_SRC(%a6),%a0		# pass ptr to src operand
-
-	bsr.l		fout
-
-	btst		&unfl_bit,FPCR_ENABLE(%a6)
-	bne.w		funfl_unfl_on2
-
-	btst		&inex2_bit,FPCR_ENABLE(%a6)
-	bne.w		funfl_inex_on2
-
-	fmovm.x		EXC_FPREGS(%a6),&0xc0	# restore fp0-fp1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-
-	unlk		%a6
-#$#	add.l		&24,%sp
-
-	btst		&0x7,(%sp)		# is trace on?
-	beq.l		_fpsp_done		# no
-
-	fmov.l		%fpiar,0x8(%sp)		# "Current PC" is in FPIAR
-	mov.w		&0x2024,0x6(%sp)	# stk fmt = 0x2; voff = 0x024
-	bra.l		_real_trace
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	_fpsp_unsupp(): 060FPSP entry point for FP "Unimplemented	#
-#		        Data Type" exception.				#
-#									#
-#	This handler should be the first code executed upon taking the	#
-#	FP Unimplemented Data Type exception in an operating system.	#
-#									#
-# XREF ****************************************************************	#
-#	_imem_read_{word,long}() - read instruction word/longword	#
-#	fix_skewed_ops() - adjust src operand in fsave frame		#
-#	set_tag_x() - determine optype of src/dst operands		#
-#	store_fpreg() - store opclass 0 or 2 result to FP regfile	#
-#	unnorm_fix() - change UNNORM operands to NORM or ZERO		#
-#	load_fpn2() - load dst operand from FP regfile			#
-#	load_fpn1() - load src operand from FP regfile			#
-#	fout() - emulate an opclass 3 instruction			#
-#	tbl_unsupp - add of table of emulation routines for opclass 0,2	#
-#	_real_inex() - "callout" to operating system inexact handler	#
-#	_fpsp_done() - "callout" for exit; work all done		#
-#	_real_trace() - "callout" for Trace enabled exception		#
-#	funimp_skew() - adjust fsave src ops to "incorrect" value	#
-#	_real_snan() - "callout" for SNAN exception			#
-#	_real_operr() - "callout" for OPERR exception			#
-#	_real_ovfl() - "callout" for OVFL exception			#
-#	_real_unfl() - "callout" for UNFL exception			#
-#	get_packed() - fetch packed operand from memory			#
-#									#
-# INPUT ***************************************************************	#
-#	- The system stack contains the "Unimp Data Type" stk frame	#
-#	- The fsave frame contains the ssrc op (for UNNORM/DENORM)	#
-#									#
-# OUTPUT **************************************************************	#
-#	If Inexact exception (opclass 3):				#
-#	- The system stack is changed to an Inexact exception stk frame	#
-#	If SNAN exception (opclass 3):					#
-#	- The system stack is changed to an SNAN exception stk frame	#
-#	If OPERR exception (opclass 3):					#
-#	- The system stack is changed to an OPERR exception stk frame	#
-#	If OVFL exception (opclass 3):					#
-#	- The system stack is changed to an OVFL exception stk frame	#
-#	If UNFL exception (opclass 3):					#
-#	- The system stack is changed to an UNFL exception stack frame	#
-#	If Trace exception enabled:					#
-#	- The system stack is changed to a Trace exception stack frame	#
-#	Else: (normal case)						#
-#	- Correct result has been stored as appropriate			#
-#									#
-# ALGORITHM ***********************************************************	#
-#	Two main instruction types can enter here: (1) DENORM or UNNORM	#
-# unimplemented data types. These can be either opclass 0,2 or 3	#
-# instructions, and (2) PACKED unimplemented data format instructions	#
-# also of opclasses 0,2, or 3.						#
-#	For UNNORM/DENORM opclass 0 and 2, the handler fetches the src	#
-# operand from the fsave state frame and the dst operand (if dyadic)	#
-# from the FP register file. The instruction is then emulated by	#
-# choosing an emulation routine from a table of routines indexed by	#
-# instruction type. Once the instruction has been emulated and result	#
-# saved, then we check to see if any enabled exceptions resulted from	#
-# instruction emulation. If none, then we exit through the "callout"	#
-# _fpsp_done(). If there is an enabled FP exception, then we insert	#
-# this exception into the FPU in the fsave state frame and then exit	#
-# through _fpsp_done().							#
-#	PACKED opclass 0 and 2 is similar in how the instruction is	#
-# emulated and exceptions handled. The differences occur in how the	#
-# handler loads the packed op (by calling get_packed() routine) and	#
-# by the fact that a Trace exception could be pending for PACKED ops.	#
-# If a Trace exception is pending, then the current exception stack	#
-# frame is changed to a Trace exception stack frame and an exit is	#
-# made through _real_trace().						#
-#	For UNNORM/DENORM opclass 3, the actual move out to memory is	#
-# performed by calling the routine fout(). If no exception should occur	#
-# as the result of emulation, then an exit either occurs through	#
-# _fpsp_done() or through _real_trace() if a Trace exception is pending	#
-# (a Trace stack frame must be created here, too). If an FP exception	#
-# should occur, then we must create an exception stack frame of that	#
-# type and jump to either _real_snan(), _real_operr(), _real_inex(),	#
-# _real_unfl(), or _real_ovfl() as appropriate. PACKED opclass 3	#
-# emulation is performed in a similar manner.				#
-#									#
-#########################################################################
-
-#
-# (1) DENORM and UNNORM (unimplemented) data types:
-#
-#				post-instruction
-#				*****************
-#				*      EA	*
-#	 pre-instruction	*		*
-#	*****************	*****************
-#	* 0x0 *  0x0dc  *	* 0x3 *  0x0dc  *
-#	*****************	*****************
-#	*     Next	*	*     Next	*
-#	*      PC	*	*      PC	*
-#	*****************	*****************
-#	*      SR	*	*      SR	*
-#	*****************	*****************
-#
-# (2) PACKED format (unsupported) opclasses two and three:
-#	*****************
-#	*      EA	*
-#	*		*
-#	*****************
-#	* 0x2 *  0x0dc	*
-#	*****************
-#	*     Next	*
-#	*      PC	*
-#	*****************
-#	*      SR	*
-#	*****************
-#
-	global		_fpsp_unsupp
-_fpsp_unsupp:
-
-	link.w		%a6,&-LOCAL_SIZE	# init stack frame
-
-	fsave		FP_SRC(%a6)		# save fp state
-
-	movm.l		&0x0303,EXC_DREGS(%a6)	# save d0-d1/a0-a1
-	fmovm.l		%fpcr,%fpsr,%fpiar,USER_FPCR(%a6) # save ctrl regs
-	fmovm.x		&0xc0,EXC_FPREGS(%a6)	# save fp0-fp1 on stack
-
-	btst		&0x5,EXC_SR(%a6)	# user or supervisor mode?
-	bne.b		fu_s
-fu_u:
-	mov.l		%usp,%a0		# fetch user stack pointer
-	mov.l		%a0,EXC_A7(%a6)		# save on stack
-	bra.b		fu_cont
-# if the exception is an opclass zero or two unimplemented data type
-# exception, then the a7' calculated here is wrong since it doesn't
-# stack an ea. however, we don't need an a7' for this case anyways.
-fu_s:
-	lea		0x4+EXC_EA(%a6),%a0	# load old a7'
-	mov.l		%a0,EXC_A7(%a6)		# save on stack
-
-fu_cont:
-
-# the FPIAR holds the "current PC" of the faulting instruction
-# the FPIAR should be set correctly for ALL exceptions passing through
-# this point.
-	mov.l		USER_FPIAR(%a6),EXC_EXTWPTR(%a6)
-	mov.l		EXC_EXTWPTR(%a6),%a0	# fetch instruction addr
-	addq.l		&0x4,EXC_EXTWPTR(%a6)	# incr instruction ptr
-	bsr.l		_imem_read_long		# fetch the instruction words
-	mov.l		%d0,EXC_OPWORD(%a6)	# store OPWORD and EXTWORD
-
-############################
-
-	clr.b		SPCOND_FLG(%a6)		# clear special condition flag
-
-# Separate opclass three (fpn-to-mem) ops since they have a different
-# stack frame and protocol.
-	btst		&0x5,EXC_CMDREG(%a6)	# is it an fmove out?
-	bne.w		fu_out			# yes
-
-# Separate packed opclass two instructions.
-	bfextu		EXC_CMDREG(%a6){&0:&6},%d0
-	cmpi.b		%d0,&0x13
-	beq.w		fu_in_pack
-
-
-# I'm not sure at this point what FPSR bits are valid for this instruction.
-# so, since the emulation routines re-create them anyways, zero exception field
-	andi.l		&0x00ff00ff,USER_FPSR(%a6) # zero exception field
-
-	fmov.l		&0x0,%fpcr		# zero current control regs
-	fmov.l		&0x0,%fpsr
-
-# Opclass two w/ memory-to-fpn operation will have an incorrect extended
-# precision format if the src format was single or double and the
-# source data type was an INF, NAN, DENORM, or UNNORM
-	lea		FP_SRC(%a6),%a0		# pass ptr to input
-	bsr.l		fix_skewed_ops
-
-# we don't know whether the src operand or the dst operand (or both) is the
-# UNNORM or DENORM. call the function that tags the operand type. if the
-# input is an UNNORM, then convert it to a NORM, DENORM, or ZERO.
-	lea		FP_SRC(%a6),%a0		# pass: ptr to src op
-	bsr.l		set_tag_x		# tag the operand type
-	cmpi.b		%d0,&UNNORM		# is operand an UNNORM?
-	bne.b		fu_op2			# no
-	bsr.l		unnorm_fix		# yes; convert to NORM,DENORM,or ZERO
-
-fu_op2:
-	mov.b		%d0,STAG(%a6)		# save src optype tag
-
-	bfextu		EXC_CMDREG(%a6){&6:&3},%d0 # dyadic; load dst reg
-
-# bit five of the fp extension word separates the monadic and dyadic operations
-# at this point
-	btst		&0x5,1+EXC_CMDREG(%a6)	# is operation monadic or dyadic?
-	beq.b		fu_extract		# monadic
-	cmpi.b		1+EXC_CMDREG(%a6),&0x3a	# is operation an ftst?
-	beq.b		fu_extract		# yes, so it's monadic, too
-
-	bsr.l		load_fpn2		# load dst into FP_DST
-
-	lea		FP_DST(%a6),%a0		# pass: ptr to dst op
-	bsr.l		set_tag_x		# tag the operand type
-	cmpi.b		%d0,&UNNORM		# is operand an UNNORM?
-	bne.b		fu_op2_done		# no
-	bsr.l		unnorm_fix		# yes; convert to NORM,DENORM,or ZERO
-fu_op2_done:
-	mov.b		%d0,DTAG(%a6)		# save dst optype tag
-
-fu_extract:
-	clr.l		%d0
-	mov.b		FPCR_MODE(%a6),%d0	# fetch rnd mode/prec
-
-	bfextu		1+EXC_CMDREG(%a6){&1:&7},%d1 # extract extension
-
-	lea		FP_SRC(%a6),%a0
-	lea		FP_DST(%a6),%a1
-
-	mov.l		(tbl_unsupp.l,%pc,%d1.l*4),%d1 # fetch routine addr
-	jsr		(tbl_unsupp.l,%pc,%d1.l*1)
-
-#
-# Exceptions in order of precedence:
-#	BSUN	: none
-#	SNAN	: all dyadic ops
-#	OPERR	: fsqrt(-NORM)
-#	OVFL	: all except ftst,fcmp
-#	UNFL	: all except ftst,fcmp
-#	DZ	: fdiv
-#	INEX2	: all except ftst,fcmp
-#	INEX1	: none (packed doesn't go through here)
-#
-
-# we determine the highest priority exception(if any) set by the
-# emulation routine that has also been enabled by the user.
-	mov.b		FPCR_ENABLE(%a6),%d0	# fetch exceptions set
-	bne.b		fu_in_ena		# some are enabled
-
-fu_in_cont:
-# fcmp and ftst do not store any result.
-	mov.b		1+EXC_CMDREG(%a6),%d0	# fetch extension
-	andi.b		&0x38,%d0		# extract bits 3-5
-	cmpi.b		%d0,&0x38		# is instr fcmp or ftst?
-	beq.b		fu_in_exit		# yes
-
-	bfextu		EXC_CMDREG(%a6){&6:&3},%d0 # dyadic; load dst reg
-	bsr.l		store_fpreg		# store the result
-
-fu_in_exit:
-
-	fmovm.x		EXC_FPREGS(%a6),&0xc0	# restore fp0/fp1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-
-	unlk		%a6
-
-	bra.l		_fpsp_done
-
-fu_in_ena:
-	and.b		FPSR_EXCEPT(%a6),%d0	# keep only ones enabled
-	bfffo		%d0{&24:&8},%d0		# find highest priority exception
-	bne.b		fu_in_exc		# there is at least one set
-
-#
-# No exceptions occurred that were also enabled. Now:
-#
-#	if (OVFL && ovfl_disabled && inexact_enabled) {
-#	    branch to _real_inex() (even if the result was exact!);
-#	} else {
-#	    save the result in the proper fp reg (unless the op is fcmp or ftst);
-#	    return;
-#	}
-#
-	btst		&ovfl_bit,FPSR_EXCEPT(%a6) # was overflow set?
-	beq.b		fu_in_cont		# no
-
-fu_in_ovflchk:
-	btst		&inex2_bit,FPCR_ENABLE(%a6) # was inexact enabled?
-	beq.b		fu_in_cont		# no
-	bra.w		fu_in_exc_ovfl		# go insert overflow frame
-
-#
-# An exception occurred and that exception was enabled:
-#
-#	shift enabled exception field into lo byte of d0;
-#	if (((INEX2 || INEX1) && inex_enabled && OVFL && ovfl_disabled) ||
-#	    ((INEX2 || INEX1) && inex_enabled && UNFL && unfl_disabled)) {
-#		/*
-#		 * this is the case where we must call _real_inex() now or else
-#		 * there will be no other way to pass it the exceptional operand
-#		 */
-#		call _real_inex();
-#	} else {
-#		restore exc state (SNAN||OPERR||OVFL||UNFL||DZ||INEX) into the FPU;
-#	}
-#
-fu_in_exc:
-	subi.l		&24,%d0			# fix offset to be 0-8
-	cmpi.b		%d0,&0x6		# is exception INEX? (6)
-	bne.b		fu_in_exc_exit		# no
-
-# the enabled exception was inexact
-	btst		&unfl_bit,FPSR_EXCEPT(%a6) # did disabled underflow occur?
-	bne.w		fu_in_exc_unfl		# yes
-	btst		&ovfl_bit,FPSR_EXCEPT(%a6) # did disabled overflow occur?
-	bne.w		fu_in_exc_ovfl		# yes
-
-# here, we insert the correct fsave status value into the fsave frame for the
-# corresponding exception. the operand in the fsave frame should be the original
-# src operand.
-fu_in_exc_exit:
-	mov.l		%d0,-(%sp)		# save d0
-	bsr.l		funimp_skew		# skew sgl or dbl inputs
-	mov.l		(%sp)+,%d0		# restore d0
-
-	mov.w		(tbl_except.b,%pc,%d0.w*2),2+FP_SRC(%a6) # create exc status
-
-	fmovm.x		EXC_FPREGS(%a6),&0xc0	# restore fp0/fp1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-
-	frestore	FP_SRC(%a6)		# restore src op
-
-	unlk		%a6
-
-	bra.l		_fpsp_done
-
-tbl_except:
-	short		0xe000,0xe006,0xe004,0xe005
-	short		0xe003,0xe002,0xe001,0xe001
-
-fu_in_exc_unfl:
-	mov.w		&0x4,%d0
-	bra.b		fu_in_exc_exit
-fu_in_exc_ovfl:
-	mov.w		&0x03,%d0
-	bra.b		fu_in_exc_exit
-
-# If the input operand to this operation was opclass two and a single
-# or double precision denorm, inf, or nan, the operand needs to be
-# "corrected" in order to have the proper equivalent extended precision
-# number.
-	global		fix_skewed_ops
-fix_skewed_ops:
-	bfextu		EXC_CMDREG(%a6){&0:&6},%d0 # extract opclass,src fmt
-	cmpi.b		%d0,&0x11		# is class = 2 & fmt = sgl?
-	beq.b		fso_sgl			# yes
-	cmpi.b		%d0,&0x15		# is class = 2 & fmt = dbl?
-	beq.b		fso_dbl			# yes
-	rts					# no
-
-fso_sgl:
-	mov.w		LOCAL_EX(%a0),%d0	# fetch src exponent
-	andi.w		&0x7fff,%d0		# strip sign
-	cmpi.w		%d0,&0x3f80		# is |exp| == $3f80?
-	beq.b		fso_sgl_dnrm_zero	# yes
-	cmpi.w		%d0,&0x407f		# no; is |exp| == $407f?
-	beq.b		fso_infnan		# yes
-	rts					# no
-
-fso_sgl_dnrm_zero:
-	andi.l		&0x7fffffff,LOCAL_HI(%a0) # clear j-bit
-	beq.b		fso_zero		# it's a skewed zero
-fso_sgl_dnrm:
-# here, we count on norm not to alter a0...
-	bsr.l		norm			# normalize mantissa
-	neg.w		%d0			# -shft amt
-	addi.w		&0x3f81,%d0		# adjust new exponent
-	andi.w		&0x8000,LOCAL_EX(%a0)	# clear old exponent
-	or.w		%d0,LOCAL_EX(%a0)	# insert new exponent
-	rts
-
-fso_zero:
-	andi.w		&0x8000,LOCAL_EX(%a0)	# clear bogus exponent
-	rts
-
-fso_infnan:
-	andi.b		&0x7f,LOCAL_HI(%a0)	# clear j-bit
-	ori.w		&0x7fff,LOCAL_EX(%a0)	# make exponent = $7fff
-	rts
-
-fso_dbl:
-	mov.w		LOCAL_EX(%a0),%d0	# fetch src exponent
-	andi.w		&0x7fff,%d0		# strip sign
-	cmpi.w		%d0,&0x3c00		# is |exp| == $3c00?
-	beq.b		fso_dbl_dnrm_zero	# yes
-	cmpi.w		%d0,&0x43ff		# no; is |exp| == $43ff?
-	beq.b		fso_infnan		# yes
-	rts					# no
-
-fso_dbl_dnrm_zero:
-	andi.l		&0x7fffffff,LOCAL_HI(%a0) # clear j-bit
-	bne.b		fso_dbl_dnrm		# it's a skewed denorm
-	tst.l		LOCAL_LO(%a0)		# is it a zero?
-	beq.b		fso_zero		# yes
-fso_dbl_dnrm:
-# here, we count on norm not to alter a0...
-	bsr.l		norm			# normalize mantissa
-	neg.w		%d0			# -shft amt
-	addi.w		&0x3c01,%d0		# adjust new exponent
-	andi.w		&0x8000,LOCAL_EX(%a0)	# clear old exponent
-	or.w		%d0,LOCAL_EX(%a0)	# insert new exponent
-	rts
-
-#################################################################
-
-# fmove out took an unimplemented data type exception.
-# the src operand is in FP_SRC. Call _fout() to write out the result and
-# to determine which exceptions, if any, to take.
-fu_out:
-
-# Separate packed move outs from the UNNORM and DENORM move outs.
-	bfextu		EXC_CMDREG(%a6){&3:&3},%d0
-	cmpi.b		%d0,&0x3
-	beq.w		fu_out_pack
-	cmpi.b		%d0,&0x7
-	beq.w		fu_out_pack
-
-
-# I'm not sure at this point what FPSR bits are valid for this instruction.
-# so, since the emulation routines re-create them anyways, zero exception field.
-# fmove out doesn't affect ccodes.
-	and.l		&0xffff00ff,USER_FPSR(%a6) # zero exception field
-
-	fmov.l		&0x0,%fpcr		# zero current control regs
-	fmov.l		&0x0,%fpsr
-
-# the src can ONLY be a DENORM or an UNNORM! so, don't make any big subroutine
-# call here. just figure out what it is...
-	mov.w		FP_SRC_EX(%a6),%d0	# get exponent
-	andi.w		&0x7fff,%d0		# strip sign
-	beq.b		fu_out_denorm		# it's a DENORM
-
-	lea		FP_SRC(%a6),%a0
-	bsr.l		unnorm_fix		# yes; fix it
-
-	mov.b		%d0,STAG(%a6)
-
-	bra.b		fu_out_cont
-fu_out_denorm:
-	mov.b		&DENORM,STAG(%a6)
-fu_out_cont:
-
-	clr.l		%d0
-	mov.b		FPCR_MODE(%a6),%d0	# fetch rnd mode/prec
-
-	lea		FP_SRC(%a6),%a0		# pass ptr to src operand
-
-	mov.l		(%a6),EXC_A6(%a6)	# in case a6 changes
-	bsr.l		fout			# call fmove out routine
-
-# Exceptions in order of precedence:
-#	BSUN	: none
-#	SNAN	: none
-#	OPERR	: fmove.{b,w,l} out of large UNNORM
-#	OVFL	: fmove.{s,d}
-#	UNFL	: fmove.{s,d,x}
-#	DZ	: none
-#	INEX2	: all
-#	INEX1	: none (packed doesn't travel through here)
-
-# determine the highest priority exception(if any) set by the
-# emulation routine that has also been enabled by the user.
-	mov.b		FPCR_ENABLE(%a6),%d0	# fetch exceptions enabled
-	bne.w		fu_out_ena		# some are enabled
-
-fu_out_done:
-
-	mov.l		EXC_A6(%a6),(%a6)	# in case a6 changed
-
-# on extended precision opclass three instructions using pre-decrement or
-# post-increment addressing mode, the address register is not updated. is the
-# address register was the stack pointer used from user mode, then let's update
-# it here. if it was used from supervisor mode, then we have to handle this
-# as a special case.
-	btst		&0x5,EXC_SR(%a6)
-	bne.b		fu_out_done_s
-
-	mov.l		EXC_A7(%a6),%a0		# restore a7
-	mov.l		%a0,%usp
-
-fu_out_done_cont:
-	fmovm.x		EXC_FPREGS(%a6),&0xc0	# restore fp0/fp1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-
-	unlk		%a6
-
-	btst		&0x7,(%sp)		# is trace on?
-	bne.b		fu_out_trace		# yes
-
-	bra.l		_fpsp_done
-
-# is the ea mode pre-decrement of the stack pointer from supervisor mode?
-# ("fmov.x fpm,-(a7)") if so,
-fu_out_done_s:
-	cmpi.b		SPCOND_FLG(%a6),&mda7_flg
-	bne.b		fu_out_done_cont
-
-# the extended precision result is still in fp0. but, we need to save it
-# somewhere on the stack until we can copy it to its final resting place.
-# here, we're counting on the top of the stack to be the old place-holders
-# for fp0/fp1 which have already been restored. that way, we can write
-# over those destinations with the shifted stack frame.
-	fmovm.x		&0x80,FP_SRC(%a6)	# put answer on stack
-
-	fmovm.x		EXC_FPREGS(%a6),&0xc0	# restore fp0/fp1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-
-	mov.l		(%a6),%a6		# restore frame pointer
-
-	mov.l		LOCAL_SIZE+EXC_SR(%sp),LOCAL_SIZE+EXC_SR-0xc(%sp)
-	mov.l		LOCAL_SIZE+2+EXC_PC(%sp),LOCAL_SIZE+2+EXC_PC-0xc(%sp)
-
-# now, copy the result to the proper place on the stack
-	mov.l		LOCAL_SIZE+FP_SRC_EX(%sp),LOCAL_SIZE+EXC_SR+0x0(%sp)
-	mov.l		LOCAL_SIZE+FP_SRC_HI(%sp),LOCAL_SIZE+EXC_SR+0x4(%sp)
-	mov.l		LOCAL_SIZE+FP_SRC_LO(%sp),LOCAL_SIZE+EXC_SR+0x8(%sp)
-
-	add.l		&LOCAL_SIZE-0x8,%sp
-
-	btst		&0x7,(%sp)
-	bne.b		fu_out_trace
-
-	bra.l		_fpsp_done
-
-fu_out_ena:
-	and.b		FPSR_EXCEPT(%a6),%d0	# keep only ones enabled
-	bfffo		%d0{&24:&8},%d0		# find highest priority exception
-	bne.b		fu_out_exc		# there is at least one set
-
-# no exceptions were set.
-# if a disabled overflow occurred and inexact was enabled but the result
-# was exact, then a branch to _real_inex() is made.
-	btst		&ovfl_bit,FPSR_EXCEPT(%a6) # was overflow set?
-	beq.w		fu_out_done		# no
-
-fu_out_ovflchk:
-	btst		&inex2_bit,FPCR_ENABLE(%a6) # was inexact enabled?
-	beq.w		fu_out_done		# no
-	bra.w		fu_inex			# yes
-
-#
-# The fp move out that took the "Unimplemented Data Type" exception was
-# being traced. Since the stack frames are similar, get the "current" PC
-# from FPIAR and put it in the trace stack frame then jump to _real_trace().
-#
-#		  UNSUPP FRAME		   TRACE FRAME
-#		*****************	*****************
-#		*      EA	*	*    Current	*
-#		*		*	*      PC	*
-#		*****************	*****************
-#		* 0x3 *  0x0dc	*	* 0x2 *  0x024	*
-#		*****************	*****************
-#		*     Next	*	*     Next	*
-#		*      PC	*	*      PC	*
-#		*****************	*****************
-#		*      SR	*	*      SR	*
-#		*****************	*****************
-#
-fu_out_trace:
-	mov.w		&0x2024,0x6(%sp)
-	fmov.l		%fpiar,0x8(%sp)
-	bra.l		_real_trace
-
-# an exception occurred and that exception was enabled.
-fu_out_exc:
-	subi.l		&24,%d0			# fix offset to be 0-8
-
-# we don't mess with the existing fsave frame. just re-insert it and
-# jump to the "_real_{}()" handler...
-	mov.w		(tbl_fu_out.b,%pc,%d0.w*2),%d0
-	jmp		(tbl_fu_out.b,%pc,%d0.w*1)
-
-	swbeg		&0x8
-tbl_fu_out:
-	short		tbl_fu_out	- tbl_fu_out	# BSUN can't happen
-	short		tbl_fu_out	- tbl_fu_out	# SNAN can't happen
-	short		fu_operr	- tbl_fu_out	# OPERR
-	short		fu_ovfl		- tbl_fu_out	# OVFL
-	short		fu_unfl		- tbl_fu_out	# UNFL
-	short		tbl_fu_out	- tbl_fu_out	# DZ can't happen
-	short		fu_inex		- tbl_fu_out	# INEX2
-	short		tbl_fu_out	- tbl_fu_out	# INEX1 won't make it here
-
-# for snan,operr,ovfl,unfl, src op is still in FP_SRC so just
-# frestore it.
-fu_snan:
-	fmovm.x		EXC_FPREGS(%a6),&0xc0	# restore fp0/fp1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-
-	mov.w		&0x30d8,EXC_VOFF(%a6)	# vector offset = 0xd8
-	mov.w		&0xe006,2+FP_SRC(%a6)
-
-	frestore	FP_SRC(%a6)
-
-	unlk		%a6
-
-
-	bra.l		_real_snan
-
-fu_operr:
-	fmovm.x		EXC_FPREGS(%a6),&0xc0	# restore fp0/fp1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-
-	mov.w		&0x30d0,EXC_VOFF(%a6)	# vector offset = 0xd0
-	mov.w		&0xe004,2+FP_SRC(%a6)
-
-	frestore	FP_SRC(%a6)
-
-	unlk		%a6
-
-
-	bra.l		_real_operr
-
-fu_ovfl:
-	fmovm.x		&0x40,FP_SRC(%a6)	# save EXOP to the stack
-
-	fmovm.x		EXC_FPREGS(%a6),&0xc0	# restore fp0/fp1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-
-	mov.w		&0x30d4,EXC_VOFF(%a6)	# vector offset = 0xd4
-	mov.w		&0xe005,2+FP_SRC(%a6)
-
-	frestore	FP_SRC(%a6)		# restore EXOP
-
-	unlk		%a6
-
-	bra.l		_real_ovfl
-
-# underflow can happen for extended precision. extended precision opclass
-# three instruction exceptions don't update the stack pointer. so, if the
-# exception occurred from user mode, then simply update a7 and exit normally.
-# if the exception occurred from supervisor mode, check if
-fu_unfl:
-	mov.l		EXC_A6(%a6),(%a6)	# restore a6
-
-	btst		&0x5,EXC_SR(%a6)
-	bne.w		fu_unfl_s
-
-	mov.l		EXC_A7(%a6),%a0		# restore a7 whether we need
-	mov.l		%a0,%usp		# to or not...
-
-fu_unfl_cont:
-	fmovm.x		&0x40,FP_SRC(%a6)	# save EXOP to the stack
-
-	fmovm.x		EXC_FPREGS(%a6),&0xc0	# restore fp0/fp1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-
-	mov.w		&0x30cc,EXC_VOFF(%a6)	# vector offset = 0xcc
-	mov.w		&0xe003,2+FP_SRC(%a6)
-
-	frestore	FP_SRC(%a6)		# restore EXOP
-
-	unlk		%a6
-
-	bra.l		_real_unfl
-
-fu_unfl_s:
-	cmpi.b		SPCOND_FLG(%a6),&mda7_flg # was the <ea> mode -(sp)?
-	bne.b		fu_unfl_cont
-
-# the extended precision result is still in fp0. but, we need to save it
-# somewhere on the stack until we can copy it to its final resting place
-# (where the exc frame is currently). make sure it's not at the top of the
-# frame or it will get overwritten when the exc stack frame is shifted "down".
-	fmovm.x		&0x80,FP_SRC(%a6)	# put answer on stack
-	fmovm.x		&0x40,FP_DST(%a6)	# put EXOP on stack
-
-	fmovm.x		EXC_FPREGS(%a6),&0xc0	# restore fp0/fp1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-
-	mov.w		&0x30cc,EXC_VOFF(%a6)	# vector offset = 0xcc
-	mov.w		&0xe003,2+FP_DST(%a6)
-
-	frestore	FP_DST(%a6)		# restore EXOP
-
-	mov.l		(%a6),%a6		# restore frame pointer
-
-	mov.l		LOCAL_SIZE+EXC_SR(%sp),LOCAL_SIZE+EXC_SR-0xc(%sp)
-	mov.l		LOCAL_SIZE+2+EXC_PC(%sp),LOCAL_SIZE+2+EXC_PC-0xc(%sp)
-	mov.l		LOCAL_SIZE+EXC_EA(%sp),LOCAL_SIZE+EXC_EA-0xc(%sp)
-
-# now, copy the result to the proper place on the stack
-	mov.l		LOCAL_SIZE+FP_SRC_EX(%sp),LOCAL_SIZE+EXC_SR+0x0(%sp)
-	mov.l		LOCAL_SIZE+FP_SRC_HI(%sp),LOCAL_SIZE+EXC_SR+0x4(%sp)
-	mov.l		LOCAL_SIZE+FP_SRC_LO(%sp),LOCAL_SIZE+EXC_SR+0x8(%sp)
-
-	add.l		&LOCAL_SIZE-0x8,%sp
-
-	bra.l		_real_unfl
-
-# fmove in and out enter here.
-fu_inex:
-	fmovm.x		&0x40,FP_SRC(%a6)	# save EXOP to the stack
-
-	fmovm.x		EXC_FPREGS(%a6),&0xc0	# restore fp0/fp1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-
-	mov.w		&0x30c4,EXC_VOFF(%a6)	# vector offset = 0xc4
-	mov.w		&0xe001,2+FP_SRC(%a6)
-
-	frestore	FP_SRC(%a6)		# restore EXOP
-
-	unlk		%a6
-
-
-	bra.l		_real_inex
-
-#########################################################################
-#########################################################################
-fu_in_pack:
-
-
-# I'm not sure at this point what FPSR bits are valid for this instruction.
-# so, since the emulation routines re-create them anyways, zero exception field
-	andi.l		&0x0ff00ff,USER_FPSR(%a6) # zero exception field
-
-	fmov.l		&0x0,%fpcr		# zero current control regs
-	fmov.l		&0x0,%fpsr
-
-	bsr.l		get_packed		# fetch packed src operand
-
-	lea		FP_SRC(%a6),%a0		# pass ptr to src
-	bsr.l		set_tag_x		# set src optype tag
-
-	mov.b		%d0,STAG(%a6)		# save src optype tag
-
-	bfextu		EXC_CMDREG(%a6){&6:&3},%d0 # dyadic; load dst reg
-
-# bit five of the fp extension word separates the monadic and dyadic operations
-# at this point
-	btst		&0x5,1+EXC_CMDREG(%a6)	# is operation monadic or dyadic?
-	beq.b		fu_extract_p		# monadic
-	cmpi.b		1+EXC_CMDREG(%a6),&0x3a	# is operation an ftst?
-	beq.b		fu_extract_p		# yes, so it's monadic, too
-
-	bsr.l		load_fpn2		# load dst into FP_DST
-
-	lea		FP_DST(%a6),%a0		# pass: ptr to dst op
-	bsr.l		set_tag_x		# tag the operand type
-	cmpi.b		%d0,&UNNORM		# is operand an UNNORM?
-	bne.b		fu_op2_done_p		# no
-	bsr.l		unnorm_fix		# yes; convert to NORM,DENORM,or ZERO
-fu_op2_done_p:
-	mov.b		%d0,DTAG(%a6)		# save dst optype tag
-
-fu_extract_p:
-	clr.l		%d0
-	mov.b		FPCR_MODE(%a6),%d0	# fetch rnd mode/prec
-
-	bfextu		1+EXC_CMDREG(%a6){&1:&7},%d1 # extract extension
-
-	lea		FP_SRC(%a6),%a0
-	lea		FP_DST(%a6),%a1
-
-	mov.l		(tbl_unsupp.l,%pc,%d1.l*4),%d1 # fetch routine addr
-	jsr		(tbl_unsupp.l,%pc,%d1.l*1)
-
-#
-# Exceptions in order of precedence:
-#	BSUN	: none
-#	SNAN	: all dyadic ops
-#	OPERR	: fsqrt(-NORM)
-#	OVFL	: all except ftst,fcmp
-#	UNFL	: all except ftst,fcmp
-#	DZ	: fdiv
-#	INEX2	: all except ftst,fcmp
-#	INEX1	: all
-#
-
-# we determine the highest priority exception(if any) set by the
-# emulation routine that has also been enabled by the user.
-	mov.b		FPCR_ENABLE(%a6),%d0	# fetch exceptions enabled
-	bne.w		fu_in_ena_p		# some are enabled
-
-fu_in_cont_p:
-# fcmp and ftst do not store any result.
-	mov.b		1+EXC_CMDREG(%a6),%d0	# fetch extension
-	andi.b		&0x38,%d0		# extract bits 3-5
-	cmpi.b		%d0,&0x38		# is instr fcmp or ftst?
-	beq.b		fu_in_exit_p		# yes
-
-	bfextu		EXC_CMDREG(%a6){&6:&3},%d0 # dyadic; load dst reg
-	bsr.l		store_fpreg		# store the result
-
-fu_in_exit_p:
-
-	btst		&0x5,EXC_SR(%a6)	# user or supervisor?
-	bne.w		fu_in_exit_s_p		# supervisor
-
-	mov.l		EXC_A7(%a6),%a0		# update user a7
-	mov.l		%a0,%usp
-
-fu_in_exit_cont_p:
-	fmovm.x		EXC_FPREGS(%a6),&0xc0	# restore fp0/fp1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-
-	unlk		%a6			# unravel stack frame
-
-	btst		&0x7,(%sp)		# is trace on?
-	bne.w		fu_trace_p		# yes
-
-	bra.l		_fpsp_done		# exit to os
-
-# the exception occurred in supervisor mode. check to see if the
-# addressing mode was (a7)+. if so, we'll need to shift the
-# stack frame "up".
-fu_in_exit_s_p:
-	btst		&mia7_bit,SPCOND_FLG(%a6) # was ea mode (a7)+
-	beq.b		fu_in_exit_cont_p	# no
-
-	fmovm.x		EXC_FPREGS(%a6),&0xc0	# restore fp0/fp1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-
-	unlk		%a6			# unravel stack frame
-
-# shift the stack frame "up". we don't really care about the <ea> field.
-	mov.l		0x4(%sp),0x10(%sp)
-	mov.l		0x0(%sp),0xc(%sp)
-	add.l		&0xc,%sp
-
-	btst		&0x7,(%sp)		# is trace on?
-	bne.w		fu_trace_p		# yes
-
-	bra.l		_fpsp_done		# exit to os
-
-fu_in_ena_p:
-	and.b		FPSR_EXCEPT(%a6),%d0	# keep only ones enabled & set
-	bfffo		%d0{&24:&8},%d0		# find highest priority exception
-	bne.b		fu_in_exc_p		# at least one was set
-
-#
-# No exceptions occurred that were also enabled. Now:
-#
-#	if (OVFL && ovfl_disabled && inexact_enabled) {
-#	    branch to _real_inex() (even if the result was exact!);
-#	} else {
-#	    save the result in the proper fp reg (unless the op is fcmp or ftst);
-#	    return;
-#	}
-#
-	btst		&ovfl_bit,FPSR_EXCEPT(%a6) # was overflow set?
-	beq.w		fu_in_cont_p		# no
-
-fu_in_ovflchk_p:
-	btst		&inex2_bit,FPCR_ENABLE(%a6) # was inexact enabled?
-	beq.w		fu_in_cont_p		# no
-	bra.w		fu_in_exc_ovfl_p	# do _real_inex() now
-
-#
-# An exception occurred and that exception was enabled:
-#
-#	shift enabled exception field into lo byte of d0;
-#	if (((INEX2 || INEX1) && inex_enabled && OVFL && ovfl_disabled) ||
-#	    ((INEX2 || INEX1) && inex_enabled && UNFL && unfl_disabled)) {
-#		/*
-#		 * this is the case where we must call _real_inex() now or else
-#		 * there will be no other way to pass it the exceptional operand
-#		 */
-#		call _real_inex();
-#	} else {
-#		restore exc state (SNAN||OPERR||OVFL||UNFL||DZ||INEX) into the FPU;
-#	}
-#
-fu_in_exc_p:
-	subi.l		&24,%d0			# fix offset to be 0-8
-	cmpi.b		%d0,&0x6		# is exception INEX? (6 or 7)
-	blt.b		fu_in_exc_exit_p	# no
-
-# the enabled exception was inexact
-	btst		&unfl_bit,FPSR_EXCEPT(%a6) # did disabled underflow occur?
-	bne.w		fu_in_exc_unfl_p	# yes
-	btst		&ovfl_bit,FPSR_EXCEPT(%a6) # did disabled overflow occur?
-	bne.w		fu_in_exc_ovfl_p	# yes
-
-# here, we insert the correct fsave status value into the fsave frame for the
-# corresponding exception. the operand in the fsave frame should be the original
-# src operand.
-# as a reminder for future predicted pain and agony, we are passing in fsave the
-# "non-skewed" operand for cases of sgl and dbl src INFs,NANs, and DENORMs.
-# this is INCORRECT for enabled SNAN which would give to the user the skewed SNAN!!!
-fu_in_exc_exit_p:
-	btst		&0x5,EXC_SR(%a6)	# user or supervisor?
-	bne.w		fu_in_exc_exit_s_p	# supervisor
-
-	mov.l		EXC_A7(%a6),%a0		# update user a7
-	mov.l		%a0,%usp
-
-fu_in_exc_exit_cont_p:
-	mov.w		(tbl_except_p.b,%pc,%d0.w*2),2+FP_SRC(%a6)
-
-	fmovm.x		EXC_FPREGS(%a6),&0xc0	# restore fp0/fp1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-
-	frestore	FP_SRC(%a6)		# restore src op
-
-	unlk		%a6
-
-	btst		&0x7,(%sp)		# is trace enabled?
-	bne.w		fu_trace_p		# yes
-
-	bra.l		_fpsp_done
-
-tbl_except_p:
-	short		0xe000,0xe006,0xe004,0xe005
-	short		0xe003,0xe002,0xe001,0xe001
-
-fu_in_exc_ovfl_p:
-	mov.w		&0x3,%d0
-	bra.w		fu_in_exc_exit_p
-
-fu_in_exc_unfl_p:
-	mov.w		&0x4,%d0
-	bra.w		fu_in_exc_exit_p
-
-fu_in_exc_exit_s_p:
-	btst		&mia7_bit,SPCOND_FLG(%a6)
-	beq.b		fu_in_exc_exit_cont_p
-
-	mov.w		(tbl_except_p.b,%pc,%d0.w*2),2+FP_SRC(%a6)
-
-	fmovm.x		EXC_FPREGS(%a6),&0xc0	# restore fp0/fp1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-
-	frestore	FP_SRC(%a6)		# restore src op
-
-	unlk		%a6			# unravel stack frame
-
-# shift stack frame "up". who cares about <ea> field.
-	mov.l		0x4(%sp),0x10(%sp)
-	mov.l		0x0(%sp),0xc(%sp)
-	add.l		&0xc,%sp
-
-	btst		&0x7,(%sp)		# is trace on?
-	bne.b		fu_trace_p		# yes
-
-	bra.l		_fpsp_done		# exit to os
-
-#
-# The opclass two PACKED instruction that took an "Unimplemented Data Type"
-# exception was being traced. Make the "current" PC the FPIAR and put it in the
-# trace stack frame then jump to _real_trace().
-#
-#		  UNSUPP FRAME		   TRACE FRAME
-#		*****************	*****************
-#		*      EA	*	*    Current	*
-#		*		*	*      PC	*
-#		*****************	*****************
-#		* 0x2 *	0x0dc	*	* 0x2 *  0x024	*
-#		*****************	*****************
-#		*     Next	*	*     Next	*
-#		*      PC	*	*      PC	*
-#		*****************	*****************
-#		*      SR	*	*      SR	*
-#		*****************	*****************
-fu_trace_p:
-	mov.w		&0x2024,0x6(%sp)
-	fmov.l		%fpiar,0x8(%sp)
-
-	bra.l		_real_trace
-
-#########################################################
-#########################################################
-fu_out_pack:
-
-
-# I'm not sure at this point what FPSR bits are valid for this instruction.
-# so, since the emulation routines re-create them anyways, zero exception field.
-# fmove out doesn't affect ccodes.
-	and.l		&0xffff00ff,USER_FPSR(%a6) # zero exception field
-
-	fmov.l		&0x0,%fpcr		# zero current control regs
-	fmov.l		&0x0,%fpsr
-
-	bfextu		EXC_CMDREG(%a6){&6:&3},%d0
-	bsr.l		load_fpn1
-
-# unlike other opclass 3, unimplemented data type exceptions, packed must be
-# able to detect all operand types.
-	lea		FP_SRC(%a6),%a0
-	bsr.l		set_tag_x		# tag the operand type
-	cmpi.b		%d0,&UNNORM		# is operand an UNNORM?
-	bne.b		fu_op2_p		# no
-	bsr.l		unnorm_fix		# yes; convert to NORM,DENORM,or ZERO
-
-fu_op2_p:
-	mov.b		%d0,STAG(%a6)		# save src optype tag
-
-	clr.l		%d0
-	mov.b		FPCR_MODE(%a6),%d0	# fetch rnd mode/prec
-
-	lea		FP_SRC(%a6),%a0		# pass ptr to src operand
-
-	mov.l		(%a6),EXC_A6(%a6)	# in case a6 changes
-	bsr.l		fout			# call fmove out routine
-
-# Exceptions in order of precedence:
-#	BSUN	: no
-#	SNAN	: yes
-#	OPERR	: if ((k_factor > +17) || (dec. exp exceeds 3 digits))
-#	OVFL	: no
-#	UNFL	: no
-#	DZ	: no
-#	INEX2	: yes
-#	INEX1	: no
-
-# determine the highest priority exception(if any) set by the
-# emulation routine that has also been enabled by the user.
-	mov.b		FPCR_ENABLE(%a6),%d0	# fetch exceptions enabled
-	bne.w		fu_out_ena_p		# some are enabled
-
-fu_out_exit_p:
-	mov.l		EXC_A6(%a6),(%a6)	# restore a6
-
-	btst		&0x5,EXC_SR(%a6)	# user or supervisor?
-	bne.b		fu_out_exit_s_p		# supervisor
-
-	mov.l		EXC_A7(%a6),%a0		# update user a7
-	mov.l		%a0,%usp
-
-fu_out_exit_cont_p:
-	fmovm.x		EXC_FPREGS(%a6),&0xc0	# restore fp0/fp1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-
-	unlk		%a6			# unravel stack frame
-
-	btst		&0x7,(%sp)		# is trace on?
-	bne.w		fu_trace_p		# yes
-
-	bra.l		_fpsp_done		# exit to os
-
-# the exception occurred in supervisor mode. check to see if the
-# addressing mode was -(a7). if so, we'll need to shift the
-# stack frame "down".
-fu_out_exit_s_p:
-	btst		&mda7_bit,SPCOND_FLG(%a6) # was ea mode -(a7)
-	beq.b		fu_out_exit_cont_p	# no
-
-	fmovm.x		EXC_FPREGS(%a6),&0xc0	# restore fp0/fp1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-
-	mov.l		(%a6),%a6		# restore frame pointer
-
-	mov.l		LOCAL_SIZE+EXC_SR(%sp),LOCAL_SIZE+EXC_SR-0xc(%sp)
-	mov.l		LOCAL_SIZE+2+EXC_PC(%sp),LOCAL_SIZE+2+EXC_PC-0xc(%sp)
-
-# now, copy the result to the proper place on the stack
-	mov.l		LOCAL_SIZE+FP_DST_EX(%sp),LOCAL_SIZE+EXC_SR+0x0(%sp)
-	mov.l		LOCAL_SIZE+FP_DST_HI(%sp),LOCAL_SIZE+EXC_SR+0x4(%sp)
-	mov.l		LOCAL_SIZE+FP_DST_LO(%sp),LOCAL_SIZE+EXC_SR+0x8(%sp)
-
-	add.l		&LOCAL_SIZE-0x8,%sp
-
-	btst		&0x7,(%sp)
-	bne.w		fu_trace_p
-
-	bra.l		_fpsp_done
-
-fu_out_ena_p:
-	and.b		FPSR_EXCEPT(%a6),%d0	# keep only ones enabled
-	bfffo		%d0{&24:&8},%d0		# find highest priority exception
-	beq.w		fu_out_exit_p
-
-	mov.l		EXC_A6(%a6),(%a6)	# restore a6
-
-# an exception occurred and that exception was enabled.
-# the only exception possible on packed move out are INEX, OPERR, and SNAN.
-fu_out_exc_p:
-	cmpi.b		%d0,&0x1a
-	bgt.w		fu_inex_p2
-	beq.w		fu_operr_p
-
-fu_snan_p:
-	btst		&0x5,EXC_SR(%a6)
-	bne.b		fu_snan_s_p
-
-	mov.l		EXC_A7(%a6),%a0
-	mov.l		%a0,%usp
-	bra.w		fu_snan
-
-fu_snan_s_p:
-	cmpi.b		SPCOND_FLG(%a6),&mda7_flg
-	bne.w		fu_snan
-
-# the instruction was "fmove.p fpn,-(a7)" from supervisor mode.
-# the strategy is to move the exception frame "down" 12 bytes. then, we
-# can store the default result where the exception frame was.
-	fmovm.x		EXC_FPREGS(%a6),&0xc0	# restore fp0/fp1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-
-	mov.w		&0x30d8,EXC_VOFF(%a6)	# vector offset = 0xd0
-	mov.w		&0xe006,2+FP_SRC(%a6)	# set fsave status
-
-	frestore	FP_SRC(%a6)		# restore src operand
-
-	mov.l		(%a6),%a6		# restore frame pointer
-
-	mov.l		LOCAL_SIZE+EXC_SR(%sp),LOCAL_SIZE+EXC_SR-0xc(%sp)
-	mov.l		LOCAL_SIZE+2+EXC_PC(%sp),LOCAL_SIZE+2+EXC_PC-0xc(%sp)
-	mov.l		LOCAL_SIZE+EXC_EA(%sp),LOCAL_SIZE+EXC_EA-0xc(%sp)
-
-# now, we copy the default result to its proper location
-	mov.l		LOCAL_SIZE+FP_DST_EX(%sp),LOCAL_SIZE+0x4(%sp)
-	mov.l		LOCAL_SIZE+FP_DST_HI(%sp),LOCAL_SIZE+0x8(%sp)
-	mov.l		LOCAL_SIZE+FP_DST_LO(%sp),LOCAL_SIZE+0xc(%sp)
-
-	add.l		&LOCAL_SIZE-0x8,%sp
-
-
-	bra.l		_real_snan
-
-fu_operr_p:
-	btst		&0x5,EXC_SR(%a6)
-	bne.w		fu_operr_p_s
-
-	mov.l		EXC_A7(%a6),%a0
-	mov.l		%a0,%usp
-	bra.w		fu_operr
-
-fu_operr_p_s:
-	cmpi.b		SPCOND_FLG(%a6),&mda7_flg
-	bne.w		fu_operr
-
-# the instruction was "fmove.p fpn,-(a7)" from supervisor mode.
-# the strategy is to move the exception frame "down" 12 bytes. then, we
-# can store the default result where the exception frame was.
-	fmovm.x		EXC_FPREGS(%a6),&0xc0	# restore fp0/fp1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-
-	mov.w		&0x30d0,EXC_VOFF(%a6)	# vector offset = 0xd0
-	mov.w		&0xe004,2+FP_SRC(%a6)	# set fsave status
-
-	frestore	FP_SRC(%a6)		# restore src operand
-
-	mov.l		(%a6),%a6		# restore frame pointer
-
-	mov.l		LOCAL_SIZE+EXC_SR(%sp),LOCAL_SIZE+EXC_SR-0xc(%sp)
-	mov.l		LOCAL_SIZE+2+EXC_PC(%sp),LOCAL_SIZE+2+EXC_PC-0xc(%sp)
-	mov.l		LOCAL_SIZE+EXC_EA(%sp),LOCAL_SIZE+EXC_EA-0xc(%sp)
-
-# now, we copy the default result to its proper location
-	mov.l		LOCAL_SIZE+FP_DST_EX(%sp),LOCAL_SIZE+0x4(%sp)
-	mov.l		LOCAL_SIZE+FP_DST_HI(%sp),LOCAL_SIZE+0x8(%sp)
-	mov.l		LOCAL_SIZE+FP_DST_LO(%sp),LOCAL_SIZE+0xc(%sp)
-
-	add.l		&LOCAL_SIZE-0x8,%sp
-
-
-	bra.l		_real_operr
-
-fu_inex_p2:
-	btst		&0x5,EXC_SR(%a6)
-	bne.w		fu_inex_s_p2
-
-	mov.l		EXC_A7(%a6),%a0
-	mov.l		%a0,%usp
-	bra.w		fu_inex
-
-fu_inex_s_p2:
-	cmpi.b		SPCOND_FLG(%a6),&mda7_flg
-	bne.w		fu_inex
-
-# the instruction was "fmove.p fpn,-(a7)" from supervisor mode.
-# the strategy is to move the exception frame "down" 12 bytes. then, we
-# can store the default result where the exception frame was.
-	fmovm.x		EXC_FPREGS(%a6),&0xc0	# restore fp0/fp1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-
-	mov.w		&0x30c4,EXC_VOFF(%a6)	# vector offset = 0xc4
-	mov.w		&0xe001,2+FP_SRC(%a6)	# set fsave status
-
-	frestore	FP_SRC(%a6)		# restore src operand
-
-	mov.l		(%a6),%a6		# restore frame pointer
-
-	mov.l		LOCAL_SIZE+EXC_SR(%sp),LOCAL_SIZE+EXC_SR-0xc(%sp)
-	mov.l		LOCAL_SIZE+2+EXC_PC(%sp),LOCAL_SIZE+2+EXC_PC-0xc(%sp)
-	mov.l		LOCAL_SIZE+EXC_EA(%sp),LOCAL_SIZE+EXC_EA-0xc(%sp)
-
-# now, we copy the default result to its proper location
-	mov.l		LOCAL_SIZE+FP_DST_EX(%sp),LOCAL_SIZE+0x4(%sp)
-	mov.l		LOCAL_SIZE+FP_DST_HI(%sp),LOCAL_SIZE+0x8(%sp)
-	mov.l		LOCAL_SIZE+FP_DST_LO(%sp),LOCAL_SIZE+0xc(%sp)
-
-	add.l		&LOCAL_SIZE-0x8,%sp
-
-
-	bra.l		_real_inex
-
-#########################################################################
-
-#
-# if we're stuffing a source operand back into an fsave frame then we
-# have to make sure that for single or double source operands that the
-# format stuffed is as weird as the hardware usually makes it.
-#
-	global		funimp_skew
-funimp_skew:
-	bfextu		EXC_EXTWORD(%a6){&3:&3},%d0 # extract src specifier
-	cmpi.b		%d0,&0x1		# was src sgl?
-	beq.b		funimp_skew_sgl		# yes
-	cmpi.b		%d0,&0x5		# was src dbl?
-	beq.b		funimp_skew_dbl		# yes
-	rts
-
-funimp_skew_sgl:
-	mov.w		FP_SRC_EX(%a6),%d0	# fetch DENORM exponent
-	andi.w		&0x7fff,%d0		# strip sign
-	beq.b		funimp_skew_sgl_not
-	cmpi.w		%d0,&0x3f80
-	bgt.b		funimp_skew_sgl_not
-	neg.w		%d0			# make exponent negative
-	addi.w		&0x3f81,%d0		# find amt to shift
-	mov.l		FP_SRC_HI(%a6),%d1	# fetch DENORM hi(man)
-	lsr.l		%d0,%d1			# shift it
-	bset		&31,%d1			# set j-bit
-	mov.l		%d1,FP_SRC_HI(%a6)	# insert new hi(man)
-	andi.w		&0x8000,FP_SRC_EX(%a6)	# clear old exponent
-	ori.w		&0x3f80,FP_SRC_EX(%a6)	# insert new "skewed" exponent
-funimp_skew_sgl_not:
-	rts
-
-funimp_skew_dbl:
-	mov.w		FP_SRC_EX(%a6),%d0	# fetch DENORM exponent
-	andi.w		&0x7fff,%d0		# strip sign
-	beq.b		funimp_skew_dbl_not
-	cmpi.w		%d0,&0x3c00
-	bgt.b		funimp_skew_dbl_not
-
-	tst.b		FP_SRC_EX(%a6)		# make "internal format"
-	smi.b		0x2+FP_SRC(%a6)
-	mov.w		%d0,FP_SRC_EX(%a6)	# insert exponent with cleared sign
-	clr.l		%d0			# clear g,r,s
-	lea		FP_SRC(%a6),%a0		# pass ptr to src op
-	mov.w		&0x3c01,%d1		# pass denorm threshold
-	bsr.l		dnrm_lp			# denorm it
-	mov.w		&0x3c00,%d0		# new exponent
-	tst.b		0x2+FP_SRC(%a6)		# is sign set?
-	beq.b		fss_dbl_denorm_done	# no
-	bset		&15,%d0			# set sign
-fss_dbl_denorm_done:
-	bset		&0x7,FP_SRC_HI(%a6)	# set j-bit
-	mov.w		%d0,FP_SRC_EX(%a6)	# insert new exponent
-funimp_skew_dbl_not:
-	rts
-
-#########################################################################
-	global		_mem_write2
-_mem_write2:
-	btst		&0x5,EXC_SR(%a6)
-	beq.l		_dmem_write
-	mov.l		0x0(%a0),FP_DST_EX(%a6)
-	mov.l		0x4(%a0),FP_DST_HI(%a6)
-	mov.l		0x8(%a0),FP_DST_LO(%a6)
-	clr.l		%d1
-	rts
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	_fpsp_effadd(): 060FPSP entry point for FP "Unimplemented	#
-#			effective address" exception.			#
-#									#
-#	This handler should be the first code executed upon taking the	#
-#	FP Unimplemented Effective Address exception in an operating	#
-#	system.								#
-#									#
-# XREF ****************************************************************	#
-#	_imem_read_long() - read instruction longword			#
-#	fix_skewed_ops() - adjust src operand in fsave frame		#
-#	set_tag_x() - determine optype of src/dst operands		#
-#	store_fpreg() - store opclass 0 or 2 result to FP regfile	#
-#	unnorm_fix() - change UNNORM operands to NORM or ZERO		#
-#	load_fpn2() - load dst operand from FP regfile			#
-#	tbl_unsupp - add of table of emulation routines for opclass 0,2	#
-#	decbin() - convert packed data to FP binary data		#
-#	_real_fpu_disabled() - "callout" for "FPU disabled" exception	#
-#	_real_access() - "callout" for access error exception		#
-#	_mem_read() - read extended immediate operand from memory	#
-#	_fpsp_done() - "callout" for exit; work all done		#
-#	_real_trace() - "callout" for Trace enabled exception		#
-#	fmovm_dynamic() - emulate dynamic fmovm instruction		#
-#	fmovm_ctrl() - emulate fmovm control instruction		#
-#									#
-# INPUT ***************************************************************	#
-#	- The system stack contains the "Unimplemented <ea>" stk frame	#
-#									#
-# OUTPUT **************************************************************	#
-#	If access error:						#
-#	- The system stack is changed to an access error stack frame	#
-#	If FPU disabled:						#
-#	- The system stack is changed to an FPU disabled stack frame	#
-#	If Trace exception enabled:					#
-#	- The system stack is changed to a Trace exception stack frame	#
-#	Else: (normal case)						#
-#	- None (correct result has been stored as appropriate)		#
-#									#
-# ALGORITHM ***********************************************************	#
-#	This exception handles 3 types of operations:			#
-# (1) FP Instructions using extended precision or packed immediate	#
-#     addressing mode.							#
-# (2) The "fmovm.x" instruction w/ dynamic register specification.	#
-# (3) The "fmovm.l" instruction w/ 2 or 3 control registers.		#
-#									#
-#	For immediate data operations, the data is read in w/ a		#
-# _mem_read() "callout", converted to FP binary (if packed), and used	#
-# as the source operand to the instruction specified by the instruction	#
-# word. If no FP exception should be reported ads a result of the	#
-# emulation, then the result is stored to the destination register and	#
-# the handler exits through _fpsp_done(). If an enabled exc has been	#
-# signalled as a result of emulation, then an fsave state frame		#
-# corresponding to the FP exception type must be entered into the 060	#
-# FPU before exiting. In either the enabled or disabled cases, we	#
-# must also check if a Trace exception is pending, in which case, we	#
-# must create a Trace exception stack frame from the current exception	#
-# stack frame. If no Trace is pending, we simply exit through		#
-# _fpsp_done().								#
-#	For "fmovm.x", call the routine fmovm_dynamic() which will	#
-# decode and emulate the instruction. No FP exceptions can be pending	#
-# as a result of this operation emulation. A Trace exception can be	#
-# pending, though, which means the current stack frame must be changed	#
-# to a Trace stack frame and an exit made through _real_trace().	#
-# For the case of "fmovm.x Dn,-(a7)", where the offending instruction	#
-# was executed from supervisor mode, this handler must store the FP	#
-# register file values to the system stack by itself since		#
-# fmovm_dynamic() can't handle this. A normal exit is made through	#
-# fpsp_done().								#
-#	For "fmovm.l", fmovm_ctrl() is used to emulate the instruction.	#
-# Again, a Trace exception may be pending and an exit made through	#
-# _real_trace(). Else, a normal exit is made through _fpsp_done().	#
-#									#
-#	Before any of the above is attempted, it must be checked to	#
-# see if the FPU is disabled. Since the "Unimp <ea>" exception is taken	#
-# before the "FPU disabled" exception, but the "FPU disabled" exception	#
-# has higher priority, we check the disabled bit in the PCR. If set,	#
-# then we must create an 8 word "FPU disabled" exception stack frame	#
-# from the current 4 word exception stack frame. This includes		#
-# reproducing the effective address of the instruction to put on the	#
-# new stack frame.							#
-#									#
-#	In the process of all emulation work, if a _mem_read()		#
-# "callout" returns a failing result indicating an access error, then	#
-# we must create an access error stack frame from the current stack	#
-# frame. This information includes a faulting address and a fault-	#
-# status-longword. These are created within this handler.		#
-#									#
-#########################################################################
-
-	global		_fpsp_effadd
-_fpsp_effadd:
-
-# This exception type takes priority over the "Line F Emulator"
-# exception. Therefore, the FPU could be disabled when entering here.
-# So, we must check to see if it's disabled and handle that case separately.
-	mov.l		%d0,-(%sp)		# save d0
-	movc		%pcr,%d0		# load proc cr
-	btst		&0x1,%d0		# is FPU disabled?
-	bne.w		iea_disabled		# yes
-	mov.l		(%sp)+,%d0		# restore d0
-
-	link		%a6,&-LOCAL_SIZE	# init stack frame
-
-	movm.l		&0x0303,EXC_DREGS(%a6)	# save d0-d1/a0-a1
-	fmovm.l		%fpcr,%fpsr,%fpiar,USER_FPCR(%a6) # save ctrl regs
-	fmovm.x		&0xc0,EXC_FPREGS(%a6)	# save fp0-fp1 on stack
-
-# PC of instruction that took the exception is the PC in the frame
-	mov.l		EXC_PC(%a6),EXC_EXTWPTR(%a6)
-
-	mov.l		EXC_EXTWPTR(%a6),%a0	# fetch instruction addr
-	addq.l		&0x4,EXC_EXTWPTR(%a6)	# incr instruction ptr
-	bsr.l		_imem_read_long		# fetch the instruction words
-	mov.l		%d0,EXC_OPWORD(%a6)	# store OPWORD and EXTWORD
-
-#########################################################################
-
-	tst.w		%d0			# is operation fmovem?
-	bmi.w		iea_fmovm		# yes
-
-#
-# here, we will have:
-#	fabs	fdabs	fsabs		facos		fmod
-#	fadd	fdadd	fsadd		fasin		frem
-#	fcmp				fatan		fscale
-#	fdiv	fddiv	fsdiv		fatanh		fsin
-#	fint				fcos		fsincos
-#	fintrz				fcosh		fsinh
-#	fmove	fdmove	fsmove		fetox		ftan
-#	fmul	fdmul	fsmul		fetoxm1		ftanh
-#	fneg	fdneg	fsneg		fgetexp		ftentox
-#	fsgldiv				fgetman		ftwotox
-#	fsglmul				flog10
-#	fsqrt				flog2
-#	fsub	fdsub	fssub		flogn
-#	ftst				flognp1
-# which can all use f<op>.{x,p}
-# so, now it's immediate data extended precision AND PACKED FORMAT!
-#
-iea_op:
-	andi.l		&0x00ff00ff,USER_FPSR(%a6)
-
-	btst		&0xa,%d0		# is src fmt x or p?
-	bne.b		iea_op_pack		# packed
-
-
-	mov.l		EXC_EXTWPTR(%a6),%a0	# pass: ptr to #<data>
-	lea		FP_SRC(%a6),%a1		# pass: ptr to super addr
-	mov.l		&0xc,%d0		# pass: 12 bytes
-	bsr.l		_imem_read		# read extended immediate
-
-	tst.l		%d1			# did ifetch fail?
-	bne.w		iea_iacc		# yes
-
-	bra.b		iea_op_setsrc
-
-iea_op_pack:
-
-	mov.l		EXC_EXTWPTR(%a6),%a0	# pass: ptr to #<data>
-	lea		FP_SRC(%a6),%a1		# pass: ptr to super dst
-	mov.l		&0xc,%d0		# pass: 12 bytes
-	bsr.l		_imem_read		# read packed operand
-
-	tst.l		%d1			# did ifetch fail?
-	bne.w		iea_iacc		# yes
-
-# The packed operand is an INF or a NAN if the exponent field is all ones.
-	bfextu		FP_SRC(%a6){&1:&15},%d0	# get exp
-	cmpi.w		%d0,&0x7fff		# INF or NAN?
-	beq.b		iea_op_setsrc		# operand is an INF or NAN
-
-# The packed operand is a zero if the mantissa is all zero, else it's
-# a normal packed op.
-	mov.b		3+FP_SRC(%a6),%d0	# get byte 4
-	andi.b		&0x0f,%d0		# clear all but last nybble
-	bne.b		iea_op_gp_not_spec	# not a zero
-	tst.l		FP_SRC_HI(%a6)		# is lw 2 zero?
-	bne.b		iea_op_gp_not_spec	# not a zero
-	tst.l		FP_SRC_LO(%a6)		# is lw 3 zero?
-	beq.b		iea_op_setsrc		# operand is a ZERO
-iea_op_gp_not_spec:
-	lea		FP_SRC(%a6),%a0		# pass: ptr to packed op
-	bsr.l		decbin			# convert to extended
-	fmovm.x		&0x80,FP_SRC(%a6)	# make this the srcop
-
-iea_op_setsrc:
-	addi.l		&0xc,EXC_EXTWPTR(%a6)	# update extension word pointer
-
-# FP_SRC now holds the src operand.
-	lea		FP_SRC(%a6),%a0		# pass: ptr to src op
-	bsr.l		set_tag_x		# tag the operand type
-	mov.b		%d0,STAG(%a6)		# could be ANYTHING!!!
-	cmpi.b		%d0,&UNNORM		# is operand an UNNORM?
-	bne.b		iea_op_getdst		# no
-	bsr.l		unnorm_fix		# yes; convert to NORM/DENORM/ZERO
-	mov.b		%d0,STAG(%a6)		# set new optype tag
-iea_op_getdst:
-	clr.b		STORE_FLG(%a6)		# clear "store result" boolean
-
-	btst		&0x5,1+EXC_CMDREG(%a6)	# is operation monadic or dyadic?
-	beq.b		iea_op_extract		# monadic
-	btst		&0x4,1+EXC_CMDREG(%a6)	# is operation fsincos,ftst,fcmp?
-	bne.b		iea_op_spec		# yes
-
-iea_op_loaddst:
-	bfextu		EXC_CMDREG(%a6){&6:&3},%d0 # fetch dst regno
-	bsr.l		load_fpn2		# load dst operand
-
-	lea		FP_DST(%a6),%a0		# pass: ptr to dst op
-	bsr.l		set_tag_x		# tag the operand type
-	mov.b		%d0,DTAG(%a6)		# could be ANYTHING!!!
-	cmpi.b		%d0,&UNNORM		# is operand an UNNORM?
-	bne.b		iea_op_extract		# no
-	bsr.l		unnorm_fix		# yes; convert to NORM/DENORM/ZERO
-	mov.b		%d0,DTAG(%a6)		# set new optype tag
-	bra.b		iea_op_extract
-
-# the operation is fsincos, ftst, or fcmp. only fcmp is dyadic
-iea_op_spec:
-	btst		&0x3,1+EXC_CMDREG(%a6)	# is operation fsincos?
-	beq.b		iea_op_extract		# yes
-# now, we're left with ftst and fcmp. so, first let's tag them so that they don't
-# store a result. then, only fcmp will branch back and pick up a dst operand.
-	st		STORE_FLG(%a6)		# don't store a final result
-	btst		&0x1,1+EXC_CMDREG(%a6)	# is operation fcmp?
-	beq.b		iea_op_loaddst		# yes
-
-iea_op_extract:
-	clr.l		%d0
-	mov.b		FPCR_MODE(%a6),%d0	# pass: rnd mode,prec
-
-	mov.b		1+EXC_CMDREG(%a6),%d1
-	andi.w		&0x007f,%d1		# extract extension
-
-	fmov.l		&0x0,%fpcr
-	fmov.l		&0x0,%fpsr
-
-	lea		FP_SRC(%a6),%a0
-	lea		FP_DST(%a6),%a1
-
-	mov.l		(tbl_unsupp.l,%pc,%d1.w*4),%d1 # fetch routine addr
-	jsr		(tbl_unsupp.l,%pc,%d1.l*1)
-
-#
-# Exceptions in order of precedence:
-#	BSUN	: none
-#	SNAN	: all operations
-#	OPERR	: all reg-reg or mem-reg operations that can normally operr
-#	OVFL	: same as OPERR
-#	UNFL	: same as OPERR
-#	DZ	: same as OPERR
-#	INEX2	: same as OPERR
-#	INEX1	: all packed immediate operations
-#
-
-# we determine the highest priority exception(if any) set by the
-# emulation routine that has also been enabled by the user.
-	mov.b		FPCR_ENABLE(%a6),%d0	# fetch exceptions enabled
-	bne.b		iea_op_ena		# some are enabled
-
-# now, we save the result, unless, of course, the operation was ftst or fcmp.
-# these don't save results.
-iea_op_save:
-	tst.b		STORE_FLG(%a6)		# does this op store a result?
-	bne.b		iea_op_exit1		# exit with no frestore
-
-iea_op_store:
-	bfextu		EXC_CMDREG(%a6){&6:&3},%d0 # fetch dst regno
-	bsr.l		store_fpreg		# store the result
-
-iea_op_exit1:
-	mov.l		EXC_PC(%a6),USER_FPIAR(%a6) # set FPIAR to "Current PC"
-	mov.l		EXC_EXTWPTR(%a6),EXC_PC(%a6) # set "Next PC" in exc frame
-
-	fmovm.x		EXC_FPREGS(%a6),&0xc0	# restore fp0-fp1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-
-	unlk		%a6			# unravel the frame
-
-	btst		&0x7,(%sp)		# is trace on?
-	bne.w		iea_op_trace		# yes
-
-	bra.l		_fpsp_done		# exit to os
-
-iea_op_ena:
-	and.b		FPSR_EXCEPT(%a6),%d0	# keep only ones enable and set
-	bfffo		%d0{&24:&8},%d0		# find highest priority exception
-	bne.b		iea_op_exc		# at least one was set
-
-# no exception occurred. now, did a disabled, exact overflow occur with inexact
-# enabled? if so, then we have to stuff an overflow frame into the FPU.
-	btst		&ovfl_bit,FPSR_EXCEPT(%a6) # did overflow occur?
-	beq.b		iea_op_save
-
-iea_op_ovfl:
-	btst		&inex2_bit,FPCR_ENABLE(%a6) # is inexact enabled?
-	beq.b		iea_op_store		# no
-	bra.b		iea_op_exc_ovfl		# yes
-
-# an enabled exception occurred. we have to insert the exception type back into
-# the machine.
-iea_op_exc:
-	subi.l		&24,%d0			# fix offset to be 0-8
-	cmpi.b		%d0,&0x6		# is exception INEX?
-	bne.b		iea_op_exc_force	# no
-
-# the enabled exception was inexact. so, if it occurs with an overflow
-# or underflow that was disabled, then we have to force an overflow or
-# underflow frame.
-	btst		&ovfl_bit,FPSR_EXCEPT(%a6) # did overflow occur?
-	bne.b		iea_op_exc_ovfl		# yes
-	btst		&unfl_bit,FPSR_EXCEPT(%a6) # did underflow occur?
-	bne.b		iea_op_exc_unfl		# yes
-
-iea_op_exc_force:
-	mov.w		(tbl_iea_except.b,%pc,%d0.w*2),2+FP_SRC(%a6)
-	bra.b		iea_op_exit2		# exit with frestore
-
-tbl_iea_except:
-	short		0xe002, 0xe006, 0xe004, 0xe005
-	short		0xe003, 0xe002, 0xe001, 0xe001
-
-iea_op_exc_ovfl:
-	mov.w		&0xe005,2+FP_SRC(%a6)
-	bra.b		iea_op_exit2
-
-iea_op_exc_unfl:
-	mov.w		&0xe003,2+FP_SRC(%a6)
-
-iea_op_exit2:
-	mov.l		EXC_PC(%a6),USER_FPIAR(%a6) # set FPIAR to "Current PC"
-	mov.l		EXC_EXTWPTR(%a6),EXC_PC(%a6) # set "Next PC" in exc frame
-
-	fmovm.x		EXC_FPREGS(%a6),&0xc0	# restore fp0-fp1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-
-	frestore	FP_SRC(%a6)		# restore exceptional state
-
-	unlk		%a6			# unravel the frame
-
-	btst		&0x7,(%sp)		# is trace on?
-	bne.b		iea_op_trace		# yes
-
-	bra.l		_fpsp_done		# exit to os
-
-#
-# The opclass two instruction that took an "Unimplemented Effective Address"
-# exception was being traced. Make the "current" PC the FPIAR and put it in
-# the trace stack frame then jump to _real_trace().
-#
-#		 UNIMP EA FRAME		   TRACE FRAME
-#		*****************	*****************
-#		* 0x0 *  0x0f0	*	*    Current	*
-#		*****************	*      PC	*
-#		*    Current	*	*****************
-#		*      PC	*	* 0x2 *  0x024	*
-#		*****************	*****************
-#		*      SR	*	*     Next	*
-#		*****************	*      PC	*
-#					*****************
-#					*      SR	*
-#					*****************
-iea_op_trace:
-	mov.l		(%sp),-(%sp)		# shift stack frame "down"
-	mov.w		0x8(%sp),0x4(%sp)
-	mov.w		&0x2024,0x6(%sp)	# stk fmt = 0x2; voff = 0x024
-	fmov.l		%fpiar,0x8(%sp)		# "Current PC" is in FPIAR
-
-	bra.l		_real_trace
-
-#########################################################################
-iea_fmovm:
-	btst		&14,%d0			# ctrl or data reg
-	beq.w		iea_fmovm_ctrl
-
-iea_fmovm_data:
-
-	btst		&0x5,EXC_SR(%a6)	# user or supervisor mode
-	bne.b		iea_fmovm_data_s
-
-iea_fmovm_data_u:
-	mov.l		%usp,%a0
-	mov.l		%a0,EXC_A7(%a6)		# store current a7
-	bsr.l		fmovm_dynamic		# do dynamic fmovm
-	mov.l		EXC_A7(%a6),%a0		# load possibly new a7
-	mov.l		%a0,%usp		# update usp
-	bra.w		iea_fmovm_exit
-
-iea_fmovm_data_s:
-	clr.b		SPCOND_FLG(%a6)
-	lea		0x2+EXC_VOFF(%a6),%a0
-	mov.l		%a0,EXC_A7(%a6)
-	bsr.l		fmovm_dynamic		# do dynamic fmovm
-
-	cmpi.b		SPCOND_FLG(%a6),&mda7_flg
-	beq.w		iea_fmovm_data_predec
-	cmpi.b		SPCOND_FLG(%a6),&mia7_flg
-	bne.w		iea_fmovm_exit
-
-# right now, d0 = the size.
-# the data has been fetched from the supervisor stack, but we have not
-# incremented the stack pointer by the appropriate number of bytes.
-# do it here.
-iea_fmovm_data_postinc:
-	btst		&0x7,EXC_SR(%a6)
-	bne.b		iea_fmovm_data_pi_trace
-
-	mov.w		EXC_SR(%a6),(EXC_SR,%a6,%d0)
-	mov.l		EXC_EXTWPTR(%a6),(EXC_PC,%a6,%d0)
-	mov.w		&0x00f0,(EXC_VOFF,%a6,%d0)
-
-	lea		(EXC_SR,%a6,%d0),%a0
-	mov.l		%a0,EXC_SR(%a6)
-
-	fmovm.x		EXC_FP0(%a6),&0xc0	# restore fp0-fp1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-
-	unlk		%a6
-	mov.l		(%sp)+,%sp
-	bra.l		_fpsp_done
-
-iea_fmovm_data_pi_trace:
-	mov.w		EXC_SR(%a6),(EXC_SR-0x4,%a6,%d0)
-	mov.l		EXC_EXTWPTR(%a6),(EXC_PC-0x4,%a6,%d0)
-	mov.w		&0x2024,(EXC_VOFF-0x4,%a6,%d0)
-	mov.l		EXC_PC(%a6),(EXC_VOFF+0x2-0x4,%a6,%d0)
-
-	lea		(EXC_SR-0x4,%a6,%d0),%a0
-	mov.l		%a0,EXC_SR(%a6)
-
-	fmovm.x		EXC_FP0(%a6),&0xc0	# restore fp0-fp1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-
-	unlk		%a6
-	mov.l		(%sp)+,%sp
-	bra.l		_real_trace
-
-# right now, d1 = size and d0 = the strg.
-iea_fmovm_data_predec:
-	mov.b		%d1,EXC_VOFF(%a6)	# store strg
-	mov.b		%d0,0x1+EXC_VOFF(%a6)	# store size
-
-	fmovm.x		EXC_FP0(%a6),&0xc0	# restore fp0-fp1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-
-	mov.l		(%a6),-(%sp)		# make a copy of a6
-	mov.l		%d0,-(%sp)		# save d0
-	mov.l		%d1,-(%sp)		# save d1
-	mov.l		EXC_EXTWPTR(%a6),-(%sp)	# make a copy of Next PC
-
-	clr.l		%d0
-	mov.b		0x1+EXC_VOFF(%a6),%d0	# fetch size
-	neg.l		%d0			# get negative of size
-
-	btst		&0x7,EXC_SR(%a6)	# is trace enabled?
-	beq.b		iea_fmovm_data_p2
-
-	mov.w		EXC_SR(%a6),(EXC_SR-0x4,%a6,%d0)
-	mov.l		EXC_PC(%a6),(EXC_VOFF-0x2,%a6,%d0)
-	mov.l		(%sp)+,(EXC_PC-0x4,%a6,%d0)
-	mov.w		&0x2024,(EXC_VOFF-0x4,%a6,%d0)
-
-	pea		(%a6,%d0)		# create final sp
-	bra.b		iea_fmovm_data_p3
-
-iea_fmovm_data_p2:
-	mov.w		EXC_SR(%a6),(EXC_SR,%a6,%d0)
-	mov.l		(%sp)+,(EXC_PC,%a6,%d0)
-	mov.w		&0x00f0,(EXC_VOFF,%a6,%d0)
-
-	pea		(0x4,%a6,%d0)		# create final sp
-
-iea_fmovm_data_p3:
-	clr.l		%d1
-	mov.b		EXC_VOFF(%a6),%d1	# fetch strg
-
-	tst.b		%d1
-	bpl.b		fm_1
-	fmovm.x		&0x80,(0x4+0x8,%a6,%d0)
-	addi.l		&0xc,%d0
-fm_1:
-	lsl.b		&0x1,%d1
-	bpl.b		fm_2
-	fmovm.x		&0x40,(0x4+0x8,%a6,%d0)
-	addi.l		&0xc,%d0
-fm_2:
-	lsl.b		&0x1,%d1
-	bpl.b		fm_3
-	fmovm.x		&0x20,(0x4+0x8,%a6,%d0)
-	addi.l		&0xc,%d0
-fm_3:
-	lsl.b		&0x1,%d1
-	bpl.b		fm_4
-	fmovm.x		&0x10,(0x4+0x8,%a6,%d0)
-	addi.l		&0xc,%d0
-fm_4:
-	lsl.b		&0x1,%d1
-	bpl.b		fm_5
-	fmovm.x		&0x08,(0x4+0x8,%a6,%d0)
-	addi.l		&0xc,%d0
-fm_5:
-	lsl.b		&0x1,%d1
-	bpl.b		fm_6
-	fmovm.x		&0x04,(0x4+0x8,%a6,%d0)
-	addi.l		&0xc,%d0
-fm_6:
-	lsl.b		&0x1,%d1
-	bpl.b		fm_7
-	fmovm.x		&0x02,(0x4+0x8,%a6,%d0)
-	addi.l		&0xc,%d0
-fm_7:
-	lsl.b		&0x1,%d1
-	bpl.b		fm_end
-	fmovm.x		&0x01,(0x4+0x8,%a6,%d0)
-fm_end:
-	mov.l		0x4(%sp),%d1
-	mov.l		0x8(%sp),%d0
-	mov.l		0xc(%sp),%a6
-	mov.l		(%sp)+,%sp
-
-	btst		&0x7,(%sp)		# is trace enabled?
-	beq.l		_fpsp_done
-	bra.l		_real_trace
-
-#########################################################################
-iea_fmovm_ctrl:
-
-	bsr.l		fmovm_ctrl		# load ctrl regs
-
-iea_fmovm_exit:
-	fmovm.x		EXC_FPREGS(%a6),&0xc0	# restore fp0-fp1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-
-	btst		&0x7,EXC_SR(%a6)	# is trace on?
-	bne.b		iea_fmovm_trace		# yes
-
-	mov.l		EXC_EXTWPTR(%a6),EXC_PC(%a6) # set Next PC
-
-	unlk		%a6			# unravel the frame
-
-	bra.l		_fpsp_done		# exit to os
-
-#
-# The control reg instruction that took an "Unimplemented Effective Address"
-# exception was being traced. The "Current PC" for the trace frame is the
-# PC stacked for Unimp EA. The "Next PC" is in EXC_EXTWPTR.
-# After fixing the stack frame, jump to _real_trace().
-#
-#		 UNIMP EA FRAME		   TRACE FRAME
-#		*****************	*****************
-#		* 0x0 *  0x0f0	*	*    Current	*
-#		*****************	*      PC	*
-#		*    Current	*	*****************
-#		*      PC	*	* 0x2 *  0x024	*
-#		*****************	*****************
-#		*      SR	*	*     Next	*
-#		*****************	*      PC	*
-#					*****************
-#					*      SR	*
-#					*****************
-# this ain't a pretty solution, but it works:
-# -restore a6 (not with unlk)
-# -shift stack frame down over where old a6 used to be
-# -add LOCAL_SIZE to stack pointer
-iea_fmovm_trace:
-	mov.l		(%a6),%a6		# restore frame pointer
-	mov.w		EXC_SR+LOCAL_SIZE(%sp),0x0+LOCAL_SIZE(%sp)
-	mov.l		EXC_PC+LOCAL_SIZE(%sp),0x8+LOCAL_SIZE(%sp)
-	mov.l		EXC_EXTWPTR+LOCAL_SIZE(%sp),0x2+LOCAL_SIZE(%sp)
-	mov.w		&0x2024,0x6+LOCAL_SIZE(%sp) # stk fmt = 0x2; voff = 0x024
-	add.l		&LOCAL_SIZE,%sp		# clear stack frame
-
-	bra.l		_real_trace
-
-#########################################################################
-# The FPU is disabled and so we should really have taken the "Line
-# F Emulator" exception. So, here we create an 8-word stack frame
-# from our 4-word stack frame. This means we must calculate the length
-# the faulting instruction to get the "next PC". This is trivial for
-# immediate operands but requires some extra work for fmovm dynamic
-# which can use most addressing modes.
-iea_disabled:
-	mov.l		(%sp)+,%d0		# restore d0
-
-	link		%a6,&-LOCAL_SIZE	# init stack frame
-
-	movm.l		&0x0303,EXC_DREGS(%a6)	# save d0-d1/a0-a1
-
-# PC of instruction that took the exception is the PC in the frame
-	mov.l		EXC_PC(%a6),EXC_EXTWPTR(%a6)
-	mov.l		EXC_EXTWPTR(%a6),%a0	# fetch instruction addr
-	addq.l		&0x4,EXC_EXTWPTR(%a6)	# incr instruction ptr
-	bsr.l		_imem_read_long		# fetch the instruction words
-	mov.l		%d0,EXC_OPWORD(%a6)	# store OPWORD and EXTWORD
-
-	tst.w		%d0			# is instr fmovm?
-	bmi.b		iea_dis_fmovm		# yes
-# instruction is using an extended precision immediate operand. Therefore,
-# the total instruction length is 16 bytes.
-iea_dis_immed:
-	mov.l		&0x10,%d0		# 16 bytes of instruction
-	bra.b		iea_dis_cont
-iea_dis_fmovm:
-	btst		&0xe,%d0		# is instr fmovm ctrl
-	bne.b		iea_dis_fmovm_data	# no
-# the instruction is a fmovm.l with 2 or 3 registers.
-	bfextu		%d0{&19:&3},%d1
-	mov.l		&0xc,%d0
-	cmpi.b		%d1,&0x7		# move all regs?
-	bne.b		iea_dis_cont
-	addq.l		&0x4,%d0
-	bra.b		iea_dis_cont
-# the instruction is an fmovm.x dynamic which can use many addressing
-# modes and thus can have several different total instruction lengths.
-# call fmovm_calc_ea which will go through the ea calc process and,
-# as a by-product, will tell us how long the instruction is.
-iea_dis_fmovm_data:
-	clr.l		%d0
-	bsr.l		fmovm_calc_ea
-	mov.l		EXC_EXTWPTR(%a6),%d0
-	sub.l		EXC_PC(%a6),%d0
-iea_dis_cont:
-	mov.w		%d0,EXC_VOFF(%a6)	# store stack shift value
-
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-
-	unlk		%a6
-
-# here, we actually create the 8-word frame from the 4-word frame,
-# with the "next PC" as additional info.
-# the <ea> field is let as undefined.
-	subq.l		&0x8,%sp		# make room for new stack
-	mov.l		%d0,-(%sp)		# save d0
-	mov.w		0xc(%sp),0x4(%sp)	# move SR
-	mov.l		0xe(%sp),0x6(%sp)	# move Current PC
-	clr.l		%d0
-	mov.w		0x12(%sp),%d0
-	mov.l		0x6(%sp),0x10(%sp)	# move Current PC
-	add.l		%d0,0x6(%sp)		# make Next PC
-	mov.w		&0x402c,0xa(%sp)	# insert offset,frame format
-	mov.l		(%sp)+,%d0		# restore d0
-
-	bra.l		_real_fpu_disabled
-
-##########
-
-iea_iacc:
-	movc		%pcr,%d0
-	btst		&0x1,%d0
-	bne.b		iea_iacc_cont
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
-	fmovm.x		EXC_FPREGS(%a6),&0xc0	# restore fp0-fp1 on stack
-iea_iacc_cont:
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-
-	unlk		%a6
-
-	subq.w		&0x8,%sp		# make stack frame bigger
-	mov.l		0x8(%sp),(%sp)		# store SR,hi(PC)
-	mov.w		0xc(%sp),0x4(%sp)	# store lo(PC)
-	mov.w		&0x4008,0x6(%sp)	# store voff
-	mov.l		0x2(%sp),0x8(%sp)	# store ea
-	mov.l		&0x09428001,0xc(%sp)	# store fslw
-
-iea_acc_done:
-	btst		&0x5,(%sp)		# user or supervisor mode?
-	beq.b		iea_acc_done2		# user
-	bset		&0x2,0xd(%sp)		# set supervisor TM bit
-
-iea_acc_done2:
-	bra.l		_real_access
-
-iea_dacc:
-	lea		-LOCAL_SIZE(%a6),%sp
-
-	movc		%pcr,%d1
-	btst		&0x1,%d1
-	bne.b		iea_dacc_cont
-	fmovm.x		EXC_FPREGS(%a6),&0xc0	# restore fp0-fp1 on stack
-	fmovm.l		LOCAL_SIZE+USER_FPCR(%sp),%fpcr,%fpsr,%fpiar # restore ctrl regs
-iea_dacc_cont:
-	mov.l		(%a6),%a6
-
-	mov.l		0x4+LOCAL_SIZE(%sp),-0x8+0x4+LOCAL_SIZE(%sp)
-	mov.w		0x8+LOCAL_SIZE(%sp),-0x8+0x8+LOCAL_SIZE(%sp)
-	mov.w		&0x4008,-0x8+0xa+LOCAL_SIZE(%sp)
-	mov.l		%a0,-0x8+0xc+LOCAL_SIZE(%sp)
-	mov.w		%d0,-0x8+0x10+LOCAL_SIZE(%sp)
-	mov.w		&0x0001,-0x8+0x12+LOCAL_SIZE(%sp)
-
-	movm.l		LOCAL_SIZE+EXC_DREGS(%sp),&0x0303 # restore d0-d1/a0-a1
-	add.w		&LOCAL_SIZE-0x4,%sp
-
-	bra.b		iea_acc_done
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	_fpsp_operr(): 060FPSP entry point for FP Operr exception.	#
-#									#
-#	This handler should be the first code executed upon taking the	#
-#	FP Operand Error exception in an operating system.		#
-#									#
-# XREF ****************************************************************	#
-#	_imem_read_long() - read instruction longword			#
-#	fix_skewed_ops() - adjust src operand in fsave frame		#
-#	_real_operr() - "callout" to operating system operr handler	#
-#	_dmem_write_{byte,word,long}() - store data to mem (opclass 3)	#
-#	store_dreg_{b,w,l}() - store data to data regfile (opclass 3)	#
-#	facc_out_{b,w,l}() - store to memory took access error (opcl 3)	#
-#									#
-# INPUT ***************************************************************	#
-#	- The system stack contains the FP Operr exception frame	#
-#	- The fsave frame contains the source operand			#
-#									#
-# OUTPUT **************************************************************	#
-#	No access error:						#
-#	- The system stack is unchanged					#
-#	- The fsave frame contains the adjusted src op for opclass 0,2	#
-#									#
-# ALGORITHM ***********************************************************	#
-#	In a system where the FP Operr exception is enabled, the goal	#
-# is to get to the handler specified at _real_operr(). But, on the 060,	#
-# for opclass zero and two instruction taking this exception, the	#
-# input operand in the fsave frame may be incorrect for some cases	#
-# and needs to be corrected. This handler calls fix_skewed_ops() to	#
-# do just this and then exits through _real_operr().			#
-#	For opclass 3 instructions, the 060 doesn't store the default	#
-# operr result out to memory or data register file as it should.	#
-# This code must emulate the move out before finally exiting through	#
-# _real_inex(). The move out, if to memory, is performed using		#
-# _mem_write() "callout" routines that may return a failing result.	#
-# In this special case, the handler must exit through facc_out()	#
-# which creates an access error stack frame from the current operr	#
-# stack frame.								#
-#									#
-#########################################################################
-
-	global		_fpsp_operr
-_fpsp_operr:
-
-	link.w		%a6,&-LOCAL_SIZE	# init stack frame
-
-	fsave		FP_SRC(%a6)		# grab the "busy" frame
-
-	movm.l		&0x0303,EXC_DREGS(%a6)	# save d0-d1/a0-a1
-	fmovm.l		%fpcr,%fpsr,%fpiar,USER_FPCR(%a6) # save ctrl regs
-	fmovm.x		&0xc0,EXC_FPREGS(%a6)	# save fp0-fp1 on stack
-
-# the FPIAR holds the "current PC" of the faulting instruction
-	mov.l		USER_FPIAR(%a6),EXC_EXTWPTR(%a6)
-
-	mov.l		EXC_EXTWPTR(%a6),%a0	# fetch instruction addr
-	addq.l		&0x4,EXC_EXTWPTR(%a6)	# incr instruction ptr
-	bsr.l		_imem_read_long		# fetch the instruction words
-	mov.l		%d0,EXC_OPWORD(%a6)
-
-##############################################################################
-
-	btst		&13,%d0			# is instr an fmove out?
-	bne.b		foperr_out		# fmove out
-
-
-# here, we simply see if the operand in the fsave frame needs to be "unskewed".
-# this would be the case for opclass two operations with a source infinity or
-# denorm operand in the sgl or dbl format. NANs also become skewed, but can't
-# cause an operr so we don't need to check for them here.
-	lea		FP_SRC(%a6),%a0		# pass: ptr to src op
-	bsr.l		fix_skewed_ops		# fix src op
-
-foperr_exit:
-	fmovm.x		EXC_FPREGS(%a6),&0xc0	# restore fp0-fp1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-
-	frestore	FP_SRC(%a6)
-
-	unlk		%a6
-	bra.l		_real_operr
-
-########################################################################
-
-#
-# the hardware does not save the default result to memory on enabled
-# operand error exceptions. we do this here before passing control to
-# the user operand error handler.
-#
-# byte, word, and long destination format operations can pass
-# through here. we simply need to test the sign of the src
-# operand and save the appropriate minimum or maximum integer value
-# to the effective address as pointed to by the stacked effective address.
-#
-# although packed opclass three operations can take operand error
-# exceptions, they won't pass through here since they are caught
-# first by the unsupported data format exception handler. that handler
-# sends them directly to _real_operr() if necessary.
-#
-foperr_out:
-
-	mov.w		FP_SRC_EX(%a6),%d1	# fetch exponent
-	andi.w		&0x7fff,%d1
-	cmpi.w		%d1,&0x7fff
-	bne.b		foperr_out_not_qnan
-# the operand is either an infinity or a QNAN.
-	tst.l		FP_SRC_LO(%a6)
-	bne.b		foperr_out_qnan
-	mov.l		FP_SRC_HI(%a6),%d1
-	andi.l		&0x7fffffff,%d1
-	beq.b		foperr_out_not_qnan
-foperr_out_qnan:
-	mov.l		FP_SRC_HI(%a6),L_SCR1(%a6)
-	bra.b		foperr_out_jmp
-
-foperr_out_not_qnan:
-	mov.l		&0x7fffffff,%d1
-	tst.b		FP_SRC_EX(%a6)
-	bpl.b		foperr_out_not_qnan2
-	addq.l		&0x1,%d1
-foperr_out_not_qnan2:
-	mov.l		%d1,L_SCR1(%a6)
-
-foperr_out_jmp:
-	bfextu		%d0{&19:&3},%d0		# extract dst format field
-	mov.b		1+EXC_OPWORD(%a6),%d1	# extract <ea> mode,reg
-	mov.w		(tbl_operr.b,%pc,%d0.w*2),%a0
-	jmp		(tbl_operr.b,%pc,%a0)
-
-tbl_operr:
-	short		foperr_out_l - tbl_operr # long word integer
-	short		tbl_operr    - tbl_operr # sgl prec shouldn't happen
-	short		tbl_operr    - tbl_operr # ext prec shouldn't happen
-	short		foperr_exit  - tbl_operr # packed won't enter here
-	short		foperr_out_w - tbl_operr # word integer
-	short		tbl_operr    - tbl_operr # dbl prec shouldn't happen
-	short		foperr_out_b - tbl_operr # byte integer
-	short		tbl_operr    - tbl_operr # packed won't enter here
-
-foperr_out_b:
-	mov.b		L_SCR1(%a6),%d0		# load positive default result
-	cmpi.b		%d1,&0x7		# is <ea> mode a data reg?
-	ble.b		foperr_out_b_save_dn	# yes
-	mov.l		EXC_EA(%a6),%a0		# pass: <ea> of default result
-	bsr.l		_dmem_write_byte	# write the default result
-
-	tst.l		%d1			# did dstore fail?
-	bne.l		facc_out_b		# yes
-
-	bra.w		foperr_exit
-foperr_out_b_save_dn:
-	andi.w		&0x0007,%d1
-	bsr.l		store_dreg_b		# store result to regfile
-	bra.w		foperr_exit
-
-foperr_out_w:
-	mov.w		L_SCR1(%a6),%d0		# load positive default result
-	cmpi.b		%d1,&0x7		# is <ea> mode a data reg?
-	ble.b		foperr_out_w_save_dn	# yes
-	mov.l		EXC_EA(%a6),%a0		# pass: <ea> of default result
-	bsr.l		_dmem_write_word	# write the default result
-
-	tst.l		%d1			# did dstore fail?
-	bne.l		facc_out_w		# yes
-
-	bra.w		foperr_exit
-foperr_out_w_save_dn:
-	andi.w		&0x0007,%d1
-	bsr.l		store_dreg_w		# store result to regfile
-	bra.w		foperr_exit
-
-foperr_out_l:
-	mov.l		L_SCR1(%a6),%d0		# load positive default result
-	cmpi.b		%d1,&0x7		# is <ea> mode a data reg?
-	ble.b		foperr_out_l_save_dn	# yes
-	mov.l		EXC_EA(%a6),%a0		# pass: <ea> of default result
-	bsr.l		_dmem_write_long	# write the default result
-
-	tst.l		%d1			# did dstore fail?
-	bne.l		facc_out_l		# yes
-
-	bra.w		foperr_exit
-foperr_out_l_save_dn:
-	andi.w		&0x0007,%d1
-	bsr.l		store_dreg_l		# store result to regfile
-	bra.w		foperr_exit
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	_fpsp_snan(): 060FPSP entry point for FP SNAN exception.	#
-#									#
-#	This handler should be the first code executed upon taking the	#
-#	FP Signalling NAN exception in an operating system.		#
-#									#
-# XREF ****************************************************************	#
-#	_imem_read_long() - read instruction longword			#
-#	fix_skewed_ops() - adjust src operand in fsave frame		#
-#	_real_snan() - "callout" to operating system SNAN handler	#
-#	_dmem_write_{byte,word,long}() - store data to mem (opclass 3)	#
-#	store_dreg_{b,w,l}() - store data to data regfile (opclass 3)	#
-#	facc_out_{b,w,l,d,x}() - store to mem took acc error (opcl 3)	#
-#	_calc_ea_fout() - fix An if <ea> is -() or ()+; also get <ea>	#
-#									#
-# INPUT ***************************************************************	#
-#	- The system stack contains the FP SNAN exception frame		#
-#	- The fsave frame contains the source operand			#
-#									#
-# OUTPUT **************************************************************	#
-#	No access error:						#
-#	- The system stack is unchanged					#
-#	- The fsave frame contains the adjusted src op for opclass 0,2	#
-#									#
-# ALGORITHM ***********************************************************	#
-#	In a system where the FP SNAN exception is enabled, the goal	#
-# is to get to the handler specified at _real_snan(). But, on the 060,	#
-# for opclass zero and two instructions taking this exception, the	#
-# input operand in the fsave frame may be incorrect for some cases	#
-# and needs to be corrected. This handler calls fix_skewed_ops() to	#
-# do just this and then exits through _real_snan().			#
-#	For opclass 3 instructions, the 060 doesn't store the default	#
-# SNAN result out to memory or data register file as it should.		#
-# This code must emulate the move out before finally exiting through	#
-# _real_snan(). The move out, if to memory, is performed using		#
-# _mem_write() "callout" routines that may return a failing result.	#
-# In this special case, the handler must exit through facc_out()	#
-# which creates an access error stack frame from the current SNAN	#
-# stack frame.								#
-#	For the case of an extended precision opclass 3 instruction,	#
-# if the effective addressing mode was -() or ()+, then the address	#
-# register must get updated by calling _calc_ea_fout(). If the <ea>	#
-# was -(a7) from supervisor mode, then the exception frame currently	#
-# on the system stack must be carefully moved "down" to make room	#
-# for the operand being moved.						#
-#									#
-#########################################################################
-
-	global		_fpsp_snan
-_fpsp_snan:
-
-	link.w		%a6,&-LOCAL_SIZE	# init stack frame
-
-	fsave		FP_SRC(%a6)		# grab the "busy" frame
-
-	movm.l		&0x0303,EXC_DREGS(%a6)	# save d0-d1/a0-a1
-	fmovm.l		%fpcr,%fpsr,%fpiar,USER_FPCR(%a6) # save ctrl regs
-	fmovm.x		&0xc0,EXC_FPREGS(%a6)	# save fp0-fp1 on stack
-
-# the FPIAR holds the "current PC" of the faulting instruction
-	mov.l		USER_FPIAR(%a6),EXC_EXTWPTR(%a6)
-
-	mov.l		EXC_EXTWPTR(%a6),%a0	# fetch instruction addr
-	addq.l		&0x4,EXC_EXTWPTR(%a6)	# incr instruction ptr
-	bsr.l		_imem_read_long		# fetch the instruction words
-	mov.l		%d0,EXC_OPWORD(%a6)
-
-##############################################################################
-
-	btst		&13,%d0			# is instr an fmove out?
-	bne.w		fsnan_out		# fmove out
-
-
-# here, we simply see if the operand in the fsave frame needs to be "unskewed".
-# this would be the case for opclass two operations with a source infinity or
-# denorm operand in the sgl or dbl format. NANs also become skewed and must be
-# fixed here.
-	lea		FP_SRC(%a6),%a0		# pass: ptr to src op
-	bsr.l		fix_skewed_ops		# fix src op
-
-fsnan_exit:
-	fmovm.x		EXC_FPREGS(%a6),&0xc0	# restore fp0-fp1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-
-	frestore	FP_SRC(%a6)
-
-	unlk		%a6
-	bra.l		_real_snan
-
-########################################################################
-
-#
-# the hardware does not save the default result to memory on enabled
-# snan exceptions. we do this here before passing control to
-# the user snan handler.
-#
-# byte, word, long, and packed destination format operations can pass
-# through here. since packed format operations already were handled by
-# fpsp_unsupp(), then we need to do nothing else for them here.
-# for byte, word, and long, we simply need to test the sign of the src
-# operand and save the appropriate minimum or maximum integer value
-# to the effective address as pointed to by the stacked effective address.
-#
-fsnan_out:
-
-	bfextu		%d0{&19:&3},%d0		# extract dst format field
-	mov.b		1+EXC_OPWORD(%a6),%d1	# extract <ea> mode,reg
-	mov.w		(tbl_snan.b,%pc,%d0.w*2),%a0
-	jmp		(tbl_snan.b,%pc,%a0)
-
-tbl_snan:
-	short		fsnan_out_l - tbl_snan # long word integer
-	short		fsnan_out_s - tbl_snan # sgl prec shouldn't happen
-	short		fsnan_out_x - tbl_snan # ext prec shouldn't happen
-	short		tbl_snan    - tbl_snan # packed needs no help
-	short		fsnan_out_w - tbl_snan # word integer
-	short		fsnan_out_d - tbl_snan # dbl prec shouldn't happen
-	short		fsnan_out_b - tbl_snan # byte integer
-	short		tbl_snan    - tbl_snan # packed needs no help
-
-fsnan_out_b:
-	mov.b		FP_SRC_HI(%a6),%d0	# load upper byte of SNAN
-	bset		&6,%d0			# set SNAN bit
-	cmpi.b		%d1,&0x7		# is <ea> mode a data reg?
-	ble.b		fsnan_out_b_dn		# yes
-	mov.l		EXC_EA(%a6),%a0		# pass: <ea> of default result
-	bsr.l		_dmem_write_byte	# write the default result
-
-	tst.l		%d1			# did dstore fail?
-	bne.l		facc_out_b		# yes
-
-	bra.w		fsnan_exit
-fsnan_out_b_dn:
-	andi.w		&0x0007,%d1
-	bsr.l		store_dreg_b		# store result to regfile
-	bra.w		fsnan_exit
-
-fsnan_out_w:
-	mov.w		FP_SRC_HI(%a6),%d0	# load upper word of SNAN
-	bset		&14,%d0			# set SNAN bit
-	cmpi.b		%d1,&0x7		# is <ea> mode a data reg?
-	ble.b		fsnan_out_w_dn		# yes
-	mov.l		EXC_EA(%a6),%a0		# pass: <ea> of default result
-	bsr.l		_dmem_write_word	# write the default result
-
-	tst.l		%d1			# did dstore fail?
-	bne.l		facc_out_w		# yes
-
-	bra.w		fsnan_exit
-fsnan_out_w_dn:
-	andi.w		&0x0007,%d1
-	bsr.l		store_dreg_w		# store result to regfile
-	bra.w		fsnan_exit
-
-fsnan_out_l:
-	mov.l		FP_SRC_HI(%a6),%d0	# load upper longword of SNAN
-	bset		&30,%d0			# set SNAN bit
-	cmpi.b		%d1,&0x7		# is <ea> mode a data reg?
-	ble.b		fsnan_out_l_dn		# yes
-	mov.l		EXC_EA(%a6),%a0		# pass: <ea> of default result
-	bsr.l		_dmem_write_long	# write the default result
-
-	tst.l		%d1			# did dstore fail?
-	bne.l		facc_out_l		# yes
-
-	bra.w		fsnan_exit
-fsnan_out_l_dn:
-	andi.w		&0x0007,%d1
-	bsr.l		store_dreg_l		# store result to regfile
-	bra.w		fsnan_exit
-
-fsnan_out_s:
-	cmpi.b		%d1,&0x7		# is <ea> mode a data reg?
-	ble.b		fsnan_out_d_dn		# yes
-	mov.l		FP_SRC_EX(%a6),%d0	# fetch SNAN sign
-	andi.l		&0x80000000,%d0		# keep sign
-	ori.l		&0x7fc00000,%d0		# insert new exponent,SNAN bit
-	mov.l		FP_SRC_HI(%a6),%d1	# load mantissa
-	lsr.l		&0x8,%d1		# shift mantissa for sgl
-	or.l		%d1,%d0			# create sgl SNAN
-	mov.l		EXC_EA(%a6),%a0		# pass: <ea> of default result
-	bsr.l		_dmem_write_long	# write the default result
-
-	tst.l		%d1			# did dstore fail?
-	bne.l		facc_out_l		# yes
-
-	bra.w		fsnan_exit
-fsnan_out_d_dn:
-	mov.l		FP_SRC_EX(%a6),%d0	# fetch SNAN sign
-	andi.l		&0x80000000,%d0		# keep sign
-	ori.l		&0x7fc00000,%d0		# insert new exponent,SNAN bit
-	mov.l		%d1,-(%sp)
-	mov.l		FP_SRC_HI(%a6),%d1	# load mantissa
-	lsr.l		&0x8,%d1		# shift mantissa for sgl
-	or.l		%d1,%d0			# create sgl SNAN
-	mov.l		(%sp)+,%d1
-	andi.w		&0x0007,%d1
-	bsr.l		store_dreg_l		# store result to regfile
-	bra.w		fsnan_exit
-
-fsnan_out_d:
-	mov.l		FP_SRC_EX(%a6),%d0	# fetch SNAN sign
-	andi.l		&0x80000000,%d0		# keep sign
-	ori.l		&0x7ff80000,%d0		# insert new exponent,SNAN bit
-	mov.l		FP_SRC_HI(%a6),%d1	# load hi mantissa
-	mov.l		%d0,FP_SCR0_EX(%a6)	# store to temp space
-	mov.l		&11,%d0			# load shift amt
-	lsr.l		%d0,%d1
-	or.l		%d1,FP_SCR0_EX(%a6)	# create dbl hi
-	mov.l		FP_SRC_HI(%a6),%d1	# load hi mantissa
-	andi.l		&0x000007ff,%d1
-	ror.l		%d0,%d1
-	mov.l		%d1,FP_SCR0_HI(%a6)	# store to temp space
-	mov.l		FP_SRC_LO(%a6),%d1	# load lo mantissa
-	lsr.l		%d0,%d1
-	or.l		%d1,FP_SCR0_HI(%a6)	# create dbl lo
-	lea		FP_SCR0(%a6),%a0	# pass: ptr to operand
-	mov.l		EXC_EA(%a6),%a1		# pass: dst addr
-	movq.l		&0x8,%d0		# pass: size of 8 bytes
-	bsr.l		_dmem_write		# write the default result
-
-	tst.l		%d1			# did dstore fail?
-	bne.l		facc_out_d		# yes
-
-	bra.w		fsnan_exit
-
-# for extended precision, if the addressing mode is pre-decrement or
-# post-increment, then the address register did not get updated.
-# in addition, for pre-decrement, the stacked <ea> is incorrect.
-fsnan_out_x:
-	clr.b		SPCOND_FLG(%a6)		# clear special case flag
-
-	mov.w		FP_SRC_EX(%a6),FP_SCR0_EX(%a6)
-	clr.w		2+FP_SCR0(%a6)
-	mov.l		FP_SRC_HI(%a6),%d0
-	bset		&30,%d0
-	mov.l		%d0,FP_SCR0_HI(%a6)
-	mov.l		FP_SRC_LO(%a6),FP_SCR0_LO(%a6)
-
-	btst		&0x5,EXC_SR(%a6)	# supervisor mode exception?
-	bne.b		fsnan_out_x_s		# yes
-
-	mov.l		%usp,%a0		# fetch user stack pointer
-	mov.l		%a0,EXC_A7(%a6)		# save on stack for calc_ea()
-	mov.l		(%a6),EXC_A6(%a6)
-
-	bsr.l		_calc_ea_fout		# find the correct ea,update An
-	mov.l		%a0,%a1
-	mov.l		%a0,EXC_EA(%a6)		# stack correct <ea>
-
-	mov.l		EXC_A7(%a6),%a0
-	mov.l		%a0,%usp		# restore user stack pointer
-	mov.l		EXC_A6(%a6),(%a6)
-
-fsnan_out_x_save:
-	lea		FP_SCR0(%a6),%a0	# pass: ptr to operand
-	movq.l		&0xc,%d0		# pass: size of extended
-	bsr.l		_dmem_write		# write the default result
-
-	tst.l		%d1			# did dstore fail?
-	bne.l		facc_out_x		# yes
-
-	bra.w		fsnan_exit
-
-fsnan_out_x_s:
-	mov.l		(%a6),EXC_A6(%a6)
-
-	bsr.l		_calc_ea_fout		# find the correct ea,update An
-	mov.l		%a0,%a1
-	mov.l		%a0,EXC_EA(%a6)		# stack correct <ea>
-
-	mov.l		EXC_A6(%a6),(%a6)
-
-	cmpi.b		SPCOND_FLG(%a6),&mda7_flg # is <ea> mode -(a7)?
-	bne.b		fsnan_out_x_save	# no
-
-# the operation was "fmove.x SNAN,-(a7)" from supervisor mode.
-	fmovm.x		EXC_FPREGS(%a6),&0xc0	# restore fp0-fp1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-
-	frestore	FP_SRC(%a6)
-
-	mov.l		EXC_A6(%a6),%a6		# restore frame pointer
-
-	mov.l		LOCAL_SIZE+EXC_SR(%sp),LOCAL_SIZE+EXC_SR-0xc(%sp)
-	mov.l		LOCAL_SIZE+EXC_PC+0x2(%sp),LOCAL_SIZE+EXC_PC+0x2-0xc(%sp)
-	mov.l		LOCAL_SIZE+EXC_EA(%sp),LOCAL_SIZE+EXC_EA-0xc(%sp)
-
-	mov.l		LOCAL_SIZE+FP_SCR0_EX(%sp),LOCAL_SIZE+EXC_SR(%sp)
-	mov.l		LOCAL_SIZE+FP_SCR0_HI(%sp),LOCAL_SIZE+EXC_PC+0x2(%sp)
-	mov.l		LOCAL_SIZE+FP_SCR0_LO(%sp),LOCAL_SIZE+EXC_EA(%sp)
-
-	add.l		&LOCAL_SIZE-0x8,%sp
-
-	bra.l		_real_snan
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	_fpsp_inex(): 060FPSP entry point for FP Inexact exception.	#
-#									#
-#	This handler should be the first code executed upon taking the	#
-#	FP Inexact exception in an operating system.			#
-#									#
-# XREF ****************************************************************	#
-#	_imem_read_long() - read instruction longword			#
-#	fix_skewed_ops() - adjust src operand in fsave frame		#
-#	set_tag_x() - determine optype of src/dst operands		#
-#	store_fpreg() - store opclass 0 or 2 result to FP regfile	#
-#	unnorm_fix() - change UNNORM operands to NORM or ZERO		#
-#	load_fpn2() - load dst operand from FP regfile			#
-#	smovcr() - emulate an "fmovcr" instruction			#
-#	fout() - emulate an opclass 3 instruction			#
-#	tbl_unsupp - add of table of emulation routines for opclass 0,2	#
-#	_real_inex() - "callout" to operating system inexact handler	#
-#									#
-# INPUT ***************************************************************	#
-#	- The system stack contains the FP Inexact exception frame	#
-#	- The fsave frame contains the source operand			#
-#									#
-# OUTPUT **************************************************************	#
-#	- The system stack is unchanged					#
-#	- The fsave frame contains the adjusted src op for opclass 0,2	#
-#									#
-# ALGORITHM ***********************************************************	#
-#	In a system where the FP Inexact exception is enabled, the goal	#
-# is to get to the handler specified at _real_inex(). But, on the 060,	#
-# for opclass zero and two instruction taking this exception, the	#
-# hardware doesn't store the correct result to the destination FP	#
-# register as did the '040 and '881/2. This handler must emulate the	#
-# instruction in order to get this value and then store it to the	#
-# correct register before calling _real_inex().				#
-#	For opclass 3 instructions, the 060 doesn't store the default	#
-# inexact result out to memory or data register file as it should.	#
-# This code must emulate the move out by calling fout() before finally	#
-# exiting through _real_inex().						#
-#									#
-#########################################################################
-
-	global		_fpsp_inex
-_fpsp_inex:
-
-	link.w		%a6,&-LOCAL_SIZE	# init stack frame
-
-	fsave		FP_SRC(%a6)		# grab the "busy" frame
-
-	movm.l		&0x0303,EXC_DREGS(%a6)	# save d0-d1/a0-a1
-	fmovm.l		%fpcr,%fpsr,%fpiar,USER_FPCR(%a6) # save ctrl regs
-	fmovm.x		&0xc0,EXC_FPREGS(%a6)	# save fp0-fp1 on stack
-
-# the FPIAR holds the "current PC" of the faulting instruction
-	mov.l		USER_FPIAR(%a6),EXC_EXTWPTR(%a6)
-
-	mov.l		EXC_EXTWPTR(%a6),%a0	# fetch instruction addr
-	addq.l		&0x4,EXC_EXTWPTR(%a6)	# incr instruction ptr
-	bsr.l		_imem_read_long		# fetch the instruction words
-	mov.l		%d0,EXC_OPWORD(%a6)
-
-##############################################################################
-
-	btst		&13,%d0			# is instr an fmove out?
-	bne.w		finex_out		# fmove out
-
-
-# the hardware, for "fabs" and "fneg" w/ a long source format, puts the
-# longword integer directly into the upper longword of the mantissa along
-# w/ an exponent value of 0x401e. we convert this to extended precision here.
-	bfextu		%d0{&19:&3},%d0		# fetch instr size
-	bne.b		finex_cont		# instr size is not long
-	cmpi.w		FP_SRC_EX(%a6),&0x401e	# is exponent 0x401e?
-	bne.b		finex_cont		# no
-	fmov.l		&0x0,%fpcr
-	fmov.l		FP_SRC_HI(%a6),%fp0	# load integer src
-	fmov.x		%fp0,FP_SRC(%a6)	# store integer as extended precision
-	mov.w		&0xe001,0x2+FP_SRC(%a6)
-
-finex_cont:
-	lea		FP_SRC(%a6),%a0		# pass: ptr to src op
-	bsr.l		fix_skewed_ops		# fix src op
-
-# Here, we zero the ccode and exception byte field since we're going to
-# emulate the whole instruction. Notice, though, that we don't kill the
-# INEX1 bit. This is because a packed op has long since been converted
-# to extended before arriving here. Therefore, we need to retain the
-# INEX1 bit from when the operand was first converted.
-	andi.l		&0x00ff01ff,USER_FPSR(%a6) # zero all but accured field
-
-	fmov.l		&0x0,%fpcr		# zero current control regs
-	fmov.l		&0x0,%fpsr
-
-	bfextu		EXC_EXTWORD(%a6){&0:&6},%d1 # extract upper 6 of cmdreg
-	cmpi.b		%d1,&0x17		# is op an fmovecr?
-	beq.w		finex_fmovcr		# yes
-
-	lea		FP_SRC(%a6),%a0		# pass: ptr to src op
-	bsr.l		set_tag_x		# tag the operand type
-	mov.b		%d0,STAG(%a6)		# maybe NORM,DENORM
-
-# bits four and five of the fp extension word separate the monadic and dyadic
-# operations that can pass through fpsp_inex(). remember that fcmp and ftst
-# will never take this exception, but fsincos will.
-	btst		&0x5,1+EXC_CMDREG(%a6)	# is operation monadic or dyadic?
-	beq.b		finex_extract		# monadic
-
-	btst		&0x4,1+EXC_CMDREG(%a6)	# is operation an fsincos?
-	bne.b		finex_extract		# yes
-
-	bfextu		EXC_CMDREG(%a6){&6:&3},%d0 # dyadic; load dst reg
-	bsr.l		load_fpn2		# load dst into FP_DST
-
-	lea		FP_DST(%a6),%a0		# pass: ptr to dst op
-	bsr.l		set_tag_x		# tag the operand type
-	cmpi.b		%d0,&UNNORM		# is operand an UNNORM?
-	bne.b		finex_op2_done		# no
-	bsr.l		unnorm_fix		# yes; convert to NORM,DENORM,or ZERO
-finex_op2_done:
-	mov.b		%d0,DTAG(%a6)		# save dst optype tag
-
-finex_extract:
-	clr.l		%d0
-	mov.b		FPCR_MODE(%a6),%d0	# pass rnd prec/mode
-
-	mov.b		1+EXC_CMDREG(%a6),%d1
-	andi.w		&0x007f,%d1		# extract extension
-
-	lea		FP_SRC(%a6),%a0
-	lea		FP_DST(%a6),%a1
-
-	mov.l		(tbl_unsupp.l,%pc,%d1.w*4),%d1 # fetch routine addr
-	jsr		(tbl_unsupp.l,%pc,%d1.l*1)
-
-# the operation has been emulated. the result is in fp0.
-finex_save:
-	bfextu		EXC_CMDREG(%a6){&6:&3},%d0
-	bsr.l		store_fpreg
-
-finex_exit:
-	fmovm.x		EXC_FPREGS(%a6),&0xc0	# restore fp0-fp1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-
-	frestore	FP_SRC(%a6)
-
-	unlk		%a6
-	bra.l		_real_inex
-
-finex_fmovcr:
-	clr.l		%d0
-	mov.b		FPCR_MODE(%a6),%d0	# pass rnd prec,mode
-	mov.b		1+EXC_CMDREG(%a6),%d1
-	andi.l		&0x0000007f,%d1		# pass rom offset
-	bsr.l		smovcr
-	bra.b		finex_save
-
-########################################################################
-
-#
-# the hardware does not save the default result to memory on enabled
-# inexact exceptions. we do this here before passing control to
-# the user inexact handler.
-#
-# byte, word, and long destination format operations can pass
-# through here. so can double and single precision.
-# although packed opclass three operations can take inexact
-# exceptions, they won't pass through here since they are caught
-# first by the unsupported data format exception handler. that handler
-# sends them directly to _real_inex() if necessary.
-#
-finex_out:
-
-	mov.b		&NORM,STAG(%a6)		# src is a NORM
-
-	clr.l		%d0
-	mov.b		FPCR_MODE(%a6),%d0	# pass rnd prec,mode
-
-	andi.l		&0xffff00ff,USER_FPSR(%a6) # zero exception field
-
-	lea		FP_SRC(%a6),%a0		# pass ptr to src operand
-
-	bsr.l		fout			# store the default result
-
-	bra.b		finex_exit
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	_fpsp_dz(): 060FPSP entry point for FP DZ exception.		#
-#									#
-#	This handler should be the first code executed upon taking	#
-#	the FP DZ exception in an operating system.			#
-#									#
-# XREF ****************************************************************	#
-#	_imem_read_long() - read instruction longword from memory	#
-#	fix_skewed_ops() - adjust fsave operand				#
-#	_real_dz() - "callout" exit point from FP DZ handler		#
-#									#
-# INPUT ***************************************************************	#
-#	- The system stack contains the FP DZ exception stack.		#
-#	- The fsave frame contains the source operand.			#
-#									#
-# OUTPUT **************************************************************	#
-#	- The system stack contains the FP DZ exception stack.		#
-#	- The fsave frame contains the adjusted source operand.		#
-#									#
-# ALGORITHM ***********************************************************	#
-#	In a system where the DZ exception is enabled, the goal is to	#
-# get to the handler specified at _real_dz(). But, on the 060, when the	#
-# exception is taken, the input operand in the fsave state frame may	#
-# be incorrect for some cases and need to be adjusted. So, this package	#
-# adjusts the operand using fix_skewed_ops() and then branches to	#
-# _real_dz().								#
-#									#
-#########################################################################
-
-	global		_fpsp_dz
-_fpsp_dz:
-
-	link.w		%a6,&-LOCAL_SIZE	# init stack frame
-
-	fsave		FP_SRC(%a6)		# grab the "busy" frame
-
-	movm.l		&0x0303,EXC_DREGS(%a6)	# save d0-d1/a0-a1
-	fmovm.l		%fpcr,%fpsr,%fpiar,USER_FPCR(%a6) # save ctrl regs
-	fmovm.x		&0xc0,EXC_FPREGS(%a6)	# save fp0-fp1 on stack
-
-# the FPIAR holds the "current PC" of the faulting instruction
-	mov.l		USER_FPIAR(%a6),EXC_EXTWPTR(%a6)
-
-	mov.l		EXC_EXTWPTR(%a6),%a0	# fetch instruction addr
-	addq.l		&0x4,EXC_EXTWPTR(%a6)	# incr instruction ptr
-	bsr.l		_imem_read_long		# fetch the instruction words
-	mov.l		%d0,EXC_OPWORD(%a6)
-
-##############################################################################
-
-
-# here, we simply see if the operand in the fsave frame needs to be "unskewed".
-# this would be the case for opclass two operations with a source zero
-# in the sgl or dbl format.
-	lea		FP_SRC(%a6),%a0		# pass: ptr to src op
-	bsr.l		fix_skewed_ops		# fix src op
-
-fdz_exit:
-	fmovm.x		EXC_FPREGS(%a6),&0xc0	# restore fp0-fp1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-
-	frestore	FP_SRC(%a6)
-
-	unlk		%a6
-	bra.l		_real_dz
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	_fpsp_fline(): 060FPSP entry point for "Line F emulator" exc.	#
-#									#
-#	This handler should be the first code executed upon taking the	#
-#	"Line F Emulator" exception in an operating system.		#
-#									#
-# XREF ****************************************************************	#
-#	_fpsp_unimp() - handle "FP Unimplemented" exceptions		#
-#	_real_fpu_disabled() - handle "FPU disabled" exceptions		#
-#	_real_fline() - handle "FLINE" exceptions			#
-#	_imem_read_long() - read instruction longword			#
-#									#
-# INPUT ***************************************************************	#
-#	- The system stack contains a "Line F Emulator" exception	#
-#	  stack frame.							#
-#									#
-# OUTPUT **************************************************************	#
-#	- The system stack is unchanged					#
-#									#
-# ALGORITHM ***********************************************************	#
-#	When a "Line F Emulator" exception occurs, there are 3 possible	#
-# exception types, denoted by the exception stack frame format number:	#
-#	(1) FPU unimplemented instruction (6 word stack frame)		#
-#	(2) FPU disabled (8 word stack frame)				#
-#	(3) Line F (4 word stack frame)					#
-#									#
-#	This module determines which and forks the flow off to the	#
-# appropriate "callout" (for "disabled" and "Line F") or to the		#
-# correct emulation code (for "FPU unimplemented").			#
-#	This code also must check for "fmovecr" instructions w/ a	#
-# non-zero <ea> field. These may get flagged as "Line F" but should	#
-# really be flagged as "FPU Unimplemented". (This is a "feature" on	#
-# the '060.								#
-#									#
-#########################################################################
-
-	global		_fpsp_fline
-_fpsp_fline:
-
-# check to see if this exception is a "FP Unimplemented Instruction"
-# exception. if so, branch directly to that handler's entry point.
-	cmpi.w		0x6(%sp),&0x202c
-	beq.l		_fpsp_unimp
-
-# check to see if the FPU is disabled. if so, jump to the OS entry
-# point for that condition.
-	cmpi.w		0x6(%sp),&0x402c
-	beq.l		_real_fpu_disabled
-
-# the exception was an "F-Line Illegal" exception. we check to see
-# if the F-Line instruction is an "fmovecr" w/ a non-zero <ea>. if
-# so, convert the F-Line exception stack frame to an FP Unimplemented
-# Instruction exception stack frame else branch to the OS entry
-# point for the F-Line exception handler.
-	link.w		%a6,&-LOCAL_SIZE	# init stack frame
-
-	movm.l		&0x0303,EXC_DREGS(%a6)	# save d0-d1/a0-a1
-
-	mov.l		EXC_PC(%a6),EXC_EXTWPTR(%a6)
-	mov.l		EXC_EXTWPTR(%a6),%a0	# fetch instruction addr
-	addq.l		&0x4,EXC_EXTWPTR(%a6)	# incr instruction ptr
-	bsr.l		_imem_read_long		# fetch instruction words
-
-	bfextu		%d0{&0:&10},%d1		# is it an fmovecr?
-	cmpi.w		%d1,&0x03c8
-	bne.b		fline_fline		# no
-
-	bfextu		%d0{&16:&6},%d1		# is it an fmovecr?
-	cmpi.b		%d1,&0x17
-	bne.b		fline_fline		# no
-
-# it's an fmovecr w/ a non-zero <ea> that has entered through
-# the F-Line Illegal exception.
-# so, we need to convert the F-Line exception stack frame into an
-# FP Unimplemented Instruction stack frame and jump to that entry
-# point.
-#
-# but, if the FPU is disabled, then we need to jump to the FPU disabled
-# entry point.
-	movc		%pcr,%d0
-	btst		&0x1,%d0
-	beq.b		fline_fmovcr
-
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-
-	unlk		%a6
-
-	sub.l		&0x8,%sp		# make room for "Next PC", <ea>
-	mov.w		0x8(%sp),(%sp)
-	mov.l		0xa(%sp),0x2(%sp)	# move "Current PC"
-	mov.w		&0x402c,0x6(%sp)
-	mov.l		0x2(%sp),0xc(%sp)
-	addq.l		&0x4,0x2(%sp)		# set "Next PC"
-
-	bra.l		_real_fpu_disabled
-
-fline_fmovcr:
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-
-	unlk		%a6
-
-	fmov.l		0x2(%sp),%fpiar		# set current PC
-	addq.l		&0x4,0x2(%sp)		# set Next PC
-
-	mov.l		(%sp),-(%sp)
-	mov.l		0x8(%sp),0x4(%sp)
-	mov.b		&0x20,0x6(%sp)
-
-	bra.l		_fpsp_unimp
-
-fline_fline:
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-
-	unlk		%a6
-
-	bra.l		_real_fline
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	_fpsp_unimp(): 060FPSP entry point for FP "Unimplemented	#
-#		       Instruction" exception.				#
-#									#
-#	This handler should be the first code executed upon taking the	#
-#	FP Unimplemented Instruction exception in an operating system.	#
-#									#
-# XREF ****************************************************************	#
-#	_imem_read_{word,long}() - read instruction word/longword	#
-#	load_fop() - load src/dst ops from memory and/or FP regfile	#
-#	store_fpreg() - store opclass 0 or 2 result to FP regfile	#
-#	tbl_trans - addr of table of emulation routines for trnscndls	#
-#	_real_access() - "callout" for access error exception		#
-#	_fpsp_done() - "callout" for exit; work all done		#
-#	_real_trace() - "callout" for Trace enabled exception		#
-#	smovcr() - emulate "fmovecr" instruction			#
-#	funimp_skew() - adjust fsave src ops to "incorrect" value	#
-#	_ftrapcc() - emulate an "ftrapcc" instruction			#
-#	_fdbcc() - emulate an "fdbcc" instruction			#
-#	_fscc() - emulate an "fscc" instruction				#
-#	_real_trap() - "callout" for Trap exception			#
-#	_real_bsun() - "callout" for enabled Bsun exception		#
-#									#
-# INPUT ***************************************************************	#
-#	- The system stack contains the "Unimplemented Instr" stk frame	#
-#									#
-# OUTPUT **************************************************************	#
-#	If access error:						#
-#	- The system stack is changed to an access error stack frame	#
-#	If Trace exception enabled:					#
-#	- The system stack is changed to a Trace exception stack frame	#
-#	Else: (normal case)						#
-#	- Correct result has been stored as appropriate			#
-#									#
-# ALGORITHM ***********************************************************	#
-#	There are two main cases of instructions that may enter here to	#
-# be emulated: (1) the FPgen instructions, most of which were also	#
-# unimplemented on the 040, and (2) "ftrapcc", "fscc", and "fdbcc".	#
-#	For the first set, this handler calls the routine load_fop()	#
-# to load the source and destination (for dyadic) operands to be used	#
-# for instruction emulation. The correct emulation routine is then	#
-# chosen by decoding the instruction type and indexing into an		#
-# emulation subroutine index table. After emulation returns, this	#
-# handler checks to see if an exception should occur as a result of the #
-# FP instruction emulation. If so, then an FP exception of the correct	#
-# type is inserted into the FPU state frame using the "frestore"	#
-# instruction before exiting through _fpsp_done(). In either the	#
-# exceptional or non-exceptional cases, we must check to see if the	#
-# Trace exception is enabled. If so, then we must create a Trace	#
-# exception frame from the current exception frame and exit through	#
-# _real_trace().							#
-#	For "fdbcc", "ftrapcc", and "fscc", the emulation subroutines	#
-# _fdbcc(), _ftrapcc(), and _fscc() respectively are used. All three	#
-# may flag that a BSUN exception should be taken. If so, then the	#
-# current exception stack frame is converted into a BSUN exception	#
-# stack frame and an exit is made through _real_bsun(). If the		#
-# instruction was "ftrapcc" and a Trap exception should result, a Trap	#
-# exception stack frame is created from the current frame and an exit	#
-# is made through _real_trap(). If a Trace exception is pending, then	#
-# a Trace exception frame is created from the current frame and a jump	#
-# is made to _real_trace(). Finally, if none of these conditions exist,	#
-# then the handler exits though the callout _fpsp_done().		#
-#									#
-#	In any of the above scenarios, if a _mem_read() or _mem_write()	#
-# "callout" returns a failing value, then an access error stack frame	#
-# is created from the current stack frame and an exit is made through	#
-# _real_access().							#
-#									#
-#########################################################################
-
-#
-# FP UNIMPLEMENTED INSTRUCTION STACK FRAME:
-#
-#	*****************
-#	*		* => <ea> of fp unimp instr.
-#	-      EA	-
-#	*		*
-#	*****************
-#	* 0x2 *  0x02c	* => frame format and vector offset(vector #11)
-#	*****************
-#	*		*
-#	-    Next PC	- => PC of instr to execute after exc handling
-#	*		*
-#	*****************
-#	*      SR	* => SR at the time the exception was taken
-#	*****************
-#
-# Note: the !NULL bit does not get set in the fsave frame when the
-# machine encounters an fp unimp exception. Therefore, it must be set
-# before leaving this handler.
-#
-	global		_fpsp_unimp
-_fpsp_unimp:
-
-	link.w		%a6,&-LOCAL_SIZE	# init stack frame
-
-	movm.l		&0x0303,EXC_DREGS(%a6)	# save d0-d1/a0-a1
-	fmovm.l		%fpcr,%fpsr,%fpiar,USER_FPCR(%a6) # save ctrl regs
-	fmovm.x		&0xc0,EXC_FPREGS(%a6)	# save fp0-fp1
-
-	btst		&0x5,EXC_SR(%a6)	# user mode exception?
-	bne.b		funimp_s		# no; supervisor mode
-
-# save the value of the user stack pointer onto the stack frame
-funimp_u:
-	mov.l		%usp,%a0		# fetch user stack pointer
-	mov.l		%a0,EXC_A7(%a6)		# store in stack frame
-	bra.b		funimp_cont
-
-# store the value of the supervisor stack pointer BEFORE the exc occurred.
-# old_sp is address just above stacked effective address.
-funimp_s:
-	lea		4+EXC_EA(%a6),%a0	# load old a7'
-	mov.l		%a0,EXC_A7(%a6)		# store a7'
-	mov.l		%a0,OLD_A7(%a6)		# make a copy
-
-funimp_cont:
-
-# the FPIAR holds the "current PC" of the faulting instruction.
-	mov.l		USER_FPIAR(%a6),EXC_EXTWPTR(%a6)
-
-	mov.l		EXC_EXTWPTR(%a6),%a0	# fetch instruction addr
-	addq.l		&0x4,EXC_EXTWPTR(%a6)	# incr instruction ptr
-	bsr.l		_imem_read_long		# fetch the instruction words
-	mov.l		%d0,EXC_OPWORD(%a6)
-
-############################################################################
-
-	fmov.l		&0x0,%fpcr		# clear FPCR
-	fmov.l		&0x0,%fpsr		# clear FPSR
-
-	clr.b		SPCOND_FLG(%a6)		# clear "special case" flag
-
-# Divide the fp instructions into 8 types based on the TYPE field in
-# bits 6-8 of the opword(classes 6,7 are undefined).
-# (for the '060, only two types  can take this exception)
-#	bftst		%d0{&7:&3}		# test TYPE
-	btst		&22,%d0			# type 0 or 1 ?
-	bne.w		funimp_misc		# type 1
-
-#########################################
-# TYPE == 0: General instructions	#
-#########################################
-funimp_gen:
-
-	clr.b		STORE_FLG(%a6)		# clear "store result" flag
-
-# clear the ccode byte and exception status byte
-	andi.l		&0x00ff00ff,USER_FPSR(%a6)
-
-	bfextu		%d0{&16:&6},%d1		# extract upper 6 of cmdreg
-	cmpi.b		%d1,&0x17		# is op an fmovecr?
-	beq.w		funimp_fmovcr		# yes
-
-funimp_gen_op:
-	bsr.l		_load_fop		# load
-
-	clr.l		%d0
-	mov.b		FPCR_MODE(%a6),%d0	# fetch rnd mode
-
-	mov.b		1+EXC_CMDREG(%a6),%d1
-	andi.w		&0x003f,%d1		# extract extension bits
-	lsl.w		&0x3,%d1		# shift right 3 bits
-	or.b		STAG(%a6),%d1		# insert src optag bits
-
-	lea		FP_DST(%a6),%a1		# pass dst ptr in a1
-	lea		FP_SRC(%a6),%a0		# pass src ptr in a0
-
-	mov.w		(tbl_trans.w,%pc,%d1.w*2),%d1
-	jsr		(tbl_trans.w,%pc,%d1.w*1) # emulate
-
-funimp_fsave:
-	mov.b		FPCR_ENABLE(%a6),%d0	# fetch exceptions enabled
-	bne.w		funimp_ena		# some are enabled
-
-funimp_store:
-	bfextu		EXC_CMDREG(%a6){&6:&3},%d0 # fetch Dn
-	bsr.l		store_fpreg		# store result to fp regfile
-
-funimp_gen_exit:
-	fmovm.x		EXC_FP0(%a6),&0xc0	# restore fp0-fp1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-
-funimp_gen_exit_cmp:
-	cmpi.b		SPCOND_FLG(%a6),&mia7_flg # was the ea mode (sp)+ ?
-	beq.b		funimp_gen_exit_a7	# yes
-
-	cmpi.b		SPCOND_FLG(%a6),&mda7_flg # was the ea mode -(sp) ?
-	beq.b		funimp_gen_exit_a7	# yes
-
-funimp_gen_exit_cont:
-	unlk		%a6
-
-funimp_gen_exit_cont2:
-	btst		&0x7,(%sp)		# is trace on?
-	beq.l		_fpsp_done		# no
-
-# this catches a problem with the case where an exception will be re-inserted
-# into the machine. the frestore has already been executed...so, the fmov.l
-# alone of the control register would trigger an unwanted exception.
-# until I feel like fixing this, we'll sidestep the exception.
-	fsave		-(%sp)
-	fmov.l		%fpiar,0x14(%sp)	# "Current PC" is in FPIAR
-	frestore	(%sp)+
-	mov.w		&0x2024,0x6(%sp)	# stk fmt = 0x2; voff = 0x24
-	bra.l		_real_trace
-
-funimp_gen_exit_a7:
-	btst		&0x5,EXC_SR(%a6)	# supervisor or user mode?
-	bne.b		funimp_gen_exit_a7_s	# supervisor
-
-	mov.l		%a0,-(%sp)
-	mov.l		EXC_A7(%a6),%a0
-	mov.l		%a0,%usp
-	mov.l		(%sp)+,%a0
-	bra.b		funimp_gen_exit_cont
-
-# if the instruction was executed from supervisor mode and the addressing
-# mode was (a7)+, then the stack frame for the rte must be shifted "up"
-# "n" bytes where "n" is the size of the src operand type.
-# f<op>.{b,w,l,s,d,x,p}
-funimp_gen_exit_a7_s:
-	mov.l		%d0,-(%sp)		# save d0
-	mov.l		EXC_A7(%a6),%d0		# load new a7'
-	sub.l		OLD_A7(%a6),%d0		# subtract old a7'
-	mov.l		0x2+EXC_PC(%a6),(0x2+EXC_PC,%a6,%d0) # shift stack frame
-	mov.l		EXC_SR(%a6),(EXC_SR,%a6,%d0) # shift stack frame
-	mov.w		%d0,EXC_SR(%a6)		# store incr number
-	mov.l		(%sp)+,%d0		# restore d0
-
-	unlk		%a6
-
-	add.w		(%sp),%sp		# stack frame shifted
-	bra.b		funimp_gen_exit_cont2
-
-######################
-# fmovecr.x #ccc,fpn #
-######################
-funimp_fmovcr:
-	clr.l		%d0
-	mov.b		FPCR_MODE(%a6),%d0
-	mov.b		1+EXC_CMDREG(%a6),%d1
-	andi.l		&0x0000007f,%d1		# pass rom offset in d1
-	bsr.l		smovcr
-	bra.w		funimp_fsave
-
-#########################################################################
-
-#
-# the user has enabled some exceptions. we figure not to see this too
-# often so that's why it gets lower priority.
-#
-funimp_ena:
-
-# was an exception set that was also enabled?
-	and.b		FPSR_EXCEPT(%a6),%d0	# keep only ones enabled and set
-	bfffo		%d0{&24:&8},%d0		# find highest priority exception
-	bne.b		funimp_exc		# at least one was set
-
-# no exception that was enabled was set BUT if we got an exact overflow
-# and overflow wasn't enabled but inexact was (yech!) then this is
-# an inexact exception; otherwise, return to normal non-exception flow.
-	btst		&ovfl_bit,FPSR_EXCEPT(%a6) # did overflow occur?
-	beq.w		funimp_store		# no; return to normal flow
-
-# the overflow w/ exact result happened but was inexact set in the FPCR?
-funimp_ovfl:
-	btst		&inex2_bit,FPCR_ENABLE(%a6) # is inexact enabled?
-	beq.w		funimp_store		# no; return to normal flow
-	bra.b		funimp_exc_ovfl		# yes
-
-# some exception happened that was actually enabled.
-# we'll insert this new exception into the FPU and then return.
-funimp_exc:
-	subi.l		&24,%d0			# fix offset to be 0-8
-	cmpi.b		%d0,&0x6		# is exception INEX?
-	bne.b		funimp_exc_force	# no
-
-# the enabled exception was inexact. so, if it occurs with an overflow
-# or underflow that was disabled, then we have to force an overflow or
-# underflow frame. the eventual overflow or underflow handler will see that
-# it's actually an inexact and act appropriately. this is the only easy
-# way to have the EXOP available for the enabled inexact handler when
-# a disabled overflow or underflow has also happened.
-	btst		&ovfl_bit,FPSR_EXCEPT(%a6) # did overflow occur?
-	bne.b		funimp_exc_ovfl		# yes
-	btst		&unfl_bit,FPSR_EXCEPT(%a6) # did underflow occur?
-	bne.b		funimp_exc_unfl		# yes
-
-# force the fsave exception status bits to signal an exception of the
-# appropriate type. don't forget to "skew" the source operand in case we
-# "unskewed" the one the hardware initially gave us.
-funimp_exc_force:
-	mov.l		%d0,-(%sp)		# save d0
-	bsr.l		funimp_skew		# check for special case
-	mov.l		(%sp)+,%d0		# restore d0
-	mov.w		(tbl_funimp_except.b,%pc,%d0.w*2),2+FP_SRC(%a6)
-	bra.b		funimp_gen_exit2	# exit with frestore
-
-tbl_funimp_except:
-	short		0xe002, 0xe006, 0xe004, 0xe005
-	short		0xe003, 0xe002, 0xe001, 0xe001
-
-# insert an overflow frame
-funimp_exc_ovfl:
-	bsr.l		funimp_skew		# check for special case
-	mov.w		&0xe005,2+FP_SRC(%a6)
-	bra.b		funimp_gen_exit2
-
-# insert an underflow frame
-funimp_exc_unfl:
-	bsr.l		funimp_skew		# check for special case
-	mov.w		&0xe003,2+FP_SRC(%a6)
-
-# this is the general exit point for an enabled exception that will be
-# restored into the machine for the instruction just emulated.
-funimp_gen_exit2:
-	fmovm.x		EXC_FP0(%a6),&0xc0	# restore fp0-fp1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-
-	frestore	FP_SRC(%a6)		# insert exceptional status
-
-	bra.w		funimp_gen_exit_cmp
-
-############################################################################
-
-#
-# TYPE == 1: FDB<cc>, FS<cc>, FTRAP<cc>
-#
-# These instructions were implemented on the '881/2 and '040 in hardware but
-# are emulated in software on the '060.
-#
-funimp_misc:
-	bfextu		%d0{&10:&3},%d1		# extract mode field
-	cmpi.b		%d1,&0x1		# is it an fdb<cc>?
-	beq.w		funimp_fdbcc		# yes
-	cmpi.b		%d1,&0x7		# is it an fs<cc>?
-	bne.w		funimp_fscc		# yes
-	bfextu		%d0{&13:&3},%d1
-	cmpi.b		%d1,&0x2		# is it an fs<cc>?
-	blt.w		funimp_fscc		# yes
-
-#########################
-# ftrap<cc>		#
-# ftrap<cc>.w #<data>	#
-# ftrap<cc>.l #<data>	#
-#########################
-funimp_ftrapcc:
-
-	bsr.l		_ftrapcc		# FTRAP<cc>()
-
-	cmpi.b		SPCOND_FLG(%a6),&fbsun_flg # is enabled bsun occurring?
-	beq.w		funimp_bsun		# yes
-
-	cmpi.b		SPCOND_FLG(%a6),&ftrapcc_flg # should a trap occur?
-	bne.w		funimp_done		# no
-
-#	 FP UNIMP FRAME		   TRAP  FRAME
-#	*****************	*****************
-#	**    <EA>     **	**  Current PC **
-#	*****************	*****************
-#	* 0x2 *  0x02c	*	* 0x2 *  0x01c  *
-#	*****************	*****************
-#	**   Next PC   **	**   Next PC   **
-#	*****************	*****************
-#	*      SR	*	*      SR	*
-#	*****************	*****************
-#	    (6 words)		    (6 words)
-#
-# the ftrapcc instruction should take a trap. so, here we must create a
-# trap stack frame from an unimplemented fp instruction stack frame and
-# jump to the user supplied entry point for the trap exception
-funimp_ftrapcc_tp:
-	mov.l		USER_FPIAR(%a6),EXC_EA(%a6) # Address = Current PC
-	mov.w		&0x201c,EXC_VOFF(%a6)	# Vector Offset = 0x01c
-
-	fmovm.x		EXC_FP0(%a6),&0xc0	# restore fp0-fp1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-
-	unlk		%a6
-	bra.l		_real_trap
-
-#########################
-# fdb<cc> Dn,<label>	#
-#########################
-funimp_fdbcc:
-
-	mov.l		EXC_EXTWPTR(%a6),%a0	# fetch instruction addr
-	addq.l		&0x2,EXC_EXTWPTR(%a6)	# incr instruction ptr
-	bsr.l		_imem_read_word		# read displacement
-
-	tst.l		%d1			# did ifetch fail?
-	bne.w		funimp_iacc		# yes
-
-	ext.l		%d0			# sign extend displacement
-
-	bsr.l		_fdbcc			# FDB<cc>()
-
-	cmpi.b		SPCOND_FLG(%a6),&fbsun_flg # is enabled bsun occurring?
-	beq.w		funimp_bsun
-
-	bra.w		funimp_done		# branch to finish
-
-#################
-# fs<cc>.b <ea>	#
-#################
-funimp_fscc:
-
-	bsr.l		_fscc			# FS<cc>()
-
-# I am assuming here that an "fs<cc>.b -(An)" or "fs<cc>.b (An)+" instruction
-# does not need to update "An" before taking a bsun exception.
-	cmpi.b		SPCOND_FLG(%a6),&fbsun_flg # is enabled bsun occurring?
-	beq.w		funimp_bsun
-
-	btst		&0x5,EXC_SR(%a6)	# yes; is it a user mode exception?
-	bne.b		funimp_fscc_s		# no
-
-funimp_fscc_u:
-	mov.l		EXC_A7(%a6),%a0		# yes; set new USP
-	mov.l		%a0,%usp
-	bra.w		funimp_done		# branch to finish
-
-# remember, I'm assuming that post-increment is bogus...(it IS!!!)
-# so, the least significant WORD of the stacked effective address got
-# overwritten by the "fs<cc> -(An)". We must shift the stack frame "down"
-# so that the rte will work correctly without destroying the result.
-# even though the operation size is byte, the stack ptr is decr by 2.
-#
-# remember, also, this instruction may be traced.
-funimp_fscc_s:
-	cmpi.b		SPCOND_FLG(%a6),&mda7_flg # was a7 modified?
-	bne.w		funimp_done		# no
-
-	fmovm.x		EXC_FP0(%a6),&0xc0	# restore fp0-fp1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-
-	unlk		%a6
-
-	btst		&0x7,(%sp)		# is trace enabled?
-	bne.b		funimp_fscc_s_trace	# yes
-
-	subq.l		&0x2,%sp
-	mov.l		0x2(%sp),(%sp)		# shift SR,hi(PC) "down"
-	mov.l		0x6(%sp),0x4(%sp)	# shift lo(PC),voff "down"
-	bra.l		_fpsp_done
-
-funimp_fscc_s_trace:
-	subq.l		&0x2,%sp
-	mov.l		0x2(%sp),(%sp)		# shift SR,hi(PC) "down"
-	mov.w		0x6(%sp),0x4(%sp)	# shift lo(PC)
-	mov.w		&0x2024,0x6(%sp)	# fmt/voff = $2024
-	fmov.l		%fpiar,0x8(%sp)		# insert "current PC"
-
-	bra.l		_real_trace
-
-#
-# The ftrap<cc>, fs<cc>, or fdb<cc> is to take an enabled bsun. we must convert
-# the fp unimplemented instruction exception stack frame into a bsun stack frame,
-# restore a bsun exception into the machine, and branch to the user
-# supplied bsun hook.
-#
-#	 FP UNIMP FRAME		   BSUN FRAME
-#	*****************	*****************
-#	**    <EA>     **	* 0x0 * 0x0c0	*
-#	*****************	*****************
-#	* 0x2 *  0x02c  *	** Current PC  **
-#	*****************	*****************
-#	**   Next PC   **	*      SR	*
-#	*****************	*****************
-#	*      SR	*	    (4 words)
-#	*****************
-#	    (6 words)
-#
-funimp_bsun:
-	mov.w		&0x00c0,2+EXC_EA(%a6)	# Fmt = 0x0; Vector Offset = 0x0c0
-	mov.l		USER_FPIAR(%a6),EXC_VOFF(%a6) # PC = Current PC
-	mov.w		EXC_SR(%a6),2+EXC_PC(%a6) # shift SR "up"
-
-	mov.w		&0xe000,2+FP_SRC(%a6)	# bsun exception enabled
-
-	fmovm.x		EXC_FP0(%a6),&0xc0	# restore fp0-fp1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-
-	frestore	FP_SRC(%a6)		# restore bsun exception
-
-	unlk		%a6
-
-	addq.l		&0x4,%sp		# erase sludge
-
-	bra.l		_real_bsun		# branch to user bsun hook
-
-#
-# all ftrapcc/fscc/fdbcc processing has been completed. unwind the stack frame
-# and return.
-#
-# as usual, we have to check for trace mode being on here. since instructions
-# modifying the supervisor stack frame don't pass through here, this is a
-# relatively easy task.
-#
-funimp_done:
-	fmovm.x		EXC_FP0(%a6),&0xc0	# restore fp0-fp1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-
-	unlk		%a6
-
-	btst		&0x7,(%sp)		# is trace enabled?
-	bne.b		funimp_trace		# yes
-
-	bra.l		_fpsp_done
-
-#	 FP UNIMP FRAME		  TRACE  FRAME
-#	*****************	*****************
-#	**    <EA>     **	**  Current PC **
-#	*****************	*****************
-#	* 0x2 *  0x02c	*	* 0x2 *  0x024  *
-#	*****************	*****************
-#	**   Next PC   **	**   Next PC   **
-#	*****************	*****************
-#	*      SR	*	*      SR	*
-#	*****************	*****************
-#	    (6 words)		    (6 words)
-#
-# the fscc instruction should take a trace trap. so, here we must create a
-# trace stack frame from an unimplemented fp instruction stack frame and
-# jump to the user supplied entry point for the trace exception
-funimp_trace:
-	fmov.l		%fpiar,0x8(%sp)		# current PC is in fpiar
-	mov.b		&0x24,0x7(%sp)		# vector offset = 0x024
-
-	bra.l		_real_trace
-
-################################################################
-
-	global		tbl_trans
-	swbeg		&0x1c0
-tbl_trans:
-	short		tbl_trans - tbl_trans	# $00-0 fmovecr all
-	short		tbl_trans - tbl_trans	# $00-1 fmovecr all
-	short		tbl_trans - tbl_trans	# $00-2 fmovecr all
-	short		tbl_trans - tbl_trans	# $00-3 fmovecr all
-	short		tbl_trans - tbl_trans	# $00-4 fmovecr all
-	short		tbl_trans - tbl_trans	# $00-5 fmovecr all
-	short		tbl_trans - tbl_trans	# $00-6 fmovecr all
-	short		tbl_trans - tbl_trans	# $00-7 fmovecr all
-
-	short		tbl_trans - tbl_trans	# $01-0 fint norm
-	short		tbl_trans - tbl_trans	# $01-1 fint zero
-	short		tbl_trans - tbl_trans	# $01-2 fint inf
-	short		tbl_trans - tbl_trans	# $01-3 fint qnan
-	short		tbl_trans - tbl_trans	# $01-5 fint denorm
-	short		tbl_trans - tbl_trans	# $01-4 fint snan
-	short		tbl_trans - tbl_trans	# $01-6 fint unnorm
-	short		tbl_trans - tbl_trans	# $01-7 ERROR
-
-	short		ssinh	 - tbl_trans	# $02-0 fsinh norm
-	short		src_zero - tbl_trans	# $02-1 fsinh zero
-	short		src_inf	 - tbl_trans	# $02-2 fsinh inf
-	short		src_qnan - tbl_trans	# $02-3 fsinh qnan
-	short		ssinhd	 - tbl_trans	# $02-5 fsinh denorm
-	short		src_snan - tbl_trans	# $02-4 fsinh snan
-	short		tbl_trans - tbl_trans	# $02-6 fsinh unnorm
-	short		tbl_trans - tbl_trans	# $02-7 ERROR
-
-	short		tbl_trans - tbl_trans	# $03-0 fintrz norm
-	short		tbl_trans - tbl_trans	# $03-1 fintrz zero
-	short		tbl_trans - tbl_trans	# $03-2 fintrz inf
-	short		tbl_trans - tbl_trans	# $03-3 fintrz qnan
-	short		tbl_trans - tbl_trans	# $03-5 fintrz denorm
-	short		tbl_trans - tbl_trans	# $03-4 fintrz snan
-	short		tbl_trans - tbl_trans	# $03-6 fintrz unnorm
-	short		tbl_trans - tbl_trans	# $03-7 ERROR
-
-	short		tbl_trans - tbl_trans	# $04-0 fsqrt norm
-	short		tbl_trans - tbl_trans	# $04-1 fsqrt zero
-	short		tbl_trans - tbl_trans	# $04-2 fsqrt inf
-	short		tbl_trans - tbl_trans	# $04-3 fsqrt qnan
-	short		tbl_trans - tbl_trans	# $04-5 fsqrt denorm
-	short		tbl_trans - tbl_trans	# $04-4 fsqrt snan
-	short		tbl_trans - tbl_trans	# $04-6 fsqrt unnorm
-	short		tbl_trans - tbl_trans	# $04-7 ERROR
-
-	short		tbl_trans - tbl_trans	# $05-0 ERROR
-	short		tbl_trans - tbl_trans	# $05-1 ERROR
-	short		tbl_trans - tbl_trans	# $05-2 ERROR
-	short		tbl_trans - tbl_trans	# $05-3 ERROR
-	short		tbl_trans - tbl_trans	# $05-4 ERROR
-	short		tbl_trans - tbl_trans	# $05-5 ERROR
-	short		tbl_trans - tbl_trans	# $05-6 ERROR
-	short		tbl_trans - tbl_trans	# $05-7 ERROR
-
-	short		slognp1	 - tbl_trans	# $06-0 flognp1 norm
-	short		src_zero - tbl_trans	# $06-1 flognp1 zero
-	short		sopr_inf - tbl_trans	# $06-2 flognp1 inf
-	short		src_qnan - tbl_trans	# $06-3 flognp1 qnan
-	short		slognp1d - tbl_trans	# $06-5 flognp1 denorm
-	short		src_snan - tbl_trans	# $06-4 flognp1 snan
-	short		tbl_trans - tbl_trans	# $06-6 flognp1 unnorm
-	short		tbl_trans - tbl_trans	# $06-7 ERROR
-
-	short		tbl_trans - tbl_trans	# $07-0 ERROR
-	short		tbl_trans - tbl_trans	# $07-1 ERROR
-	short		tbl_trans - tbl_trans	# $07-2 ERROR
-	short		tbl_trans - tbl_trans	# $07-3 ERROR
-	short		tbl_trans - tbl_trans	# $07-4 ERROR
-	short		tbl_trans - tbl_trans	# $07-5 ERROR
-	short		tbl_trans - tbl_trans	# $07-6 ERROR
-	short		tbl_trans - tbl_trans	# $07-7 ERROR
-
-	short		setoxm1	 - tbl_trans	# $08-0 fetoxm1 norm
-	short		src_zero - tbl_trans	# $08-1 fetoxm1 zero
-	short		setoxm1i - tbl_trans	# $08-2 fetoxm1 inf
-	short		src_qnan - tbl_trans	# $08-3 fetoxm1 qnan
-	short		setoxm1d - tbl_trans	# $08-5 fetoxm1 denorm
-	short		src_snan - tbl_trans	# $08-4 fetoxm1 snan
-	short		tbl_trans - tbl_trans	# $08-6 fetoxm1 unnorm
-	short		tbl_trans - tbl_trans	# $08-7 ERROR
-
-	short		stanh	 - tbl_trans	# $09-0 ftanh norm
-	short		src_zero - tbl_trans	# $09-1 ftanh zero
-	short		src_one	 - tbl_trans	# $09-2 ftanh inf
-	short		src_qnan - tbl_trans	# $09-3 ftanh qnan
-	short		stanhd	 - tbl_trans	# $09-5 ftanh denorm
-	short		src_snan - tbl_trans	# $09-4 ftanh snan
-	short		tbl_trans - tbl_trans	# $09-6 ftanh unnorm
-	short		tbl_trans - tbl_trans	# $09-7 ERROR
-
-	short		satan	 - tbl_trans	# $0a-0 fatan norm
-	short		src_zero - tbl_trans	# $0a-1 fatan zero
-	short		spi_2	 - tbl_trans	# $0a-2 fatan inf
-	short		src_qnan - tbl_trans	# $0a-3 fatan qnan
-	short		satand	 - tbl_trans	# $0a-5 fatan denorm
-	short		src_snan - tbl_trans	# $0a-4 fatan snan
-	short		tbl_trans - tbl_trans	# $0a-6 fatan unnorm
-	short		tbl_trans - tbl_trans	# $0a-7 ERROR
-
-	short		tbl_trans - tbl_trans	# $0b-0 ERROR
-	short		tbl_trans - tbl_trans	# $0b-1 ERROR
-	short		tbl_trans - tbl_trans	# $0b-2 ERROR
-	short		tbl_trans - tbl_trans	# $0b-3 ERROR
-	short		tbl_trans - tbl_trans	# $0b-4 ERROR
-	short		tbl_trans - tbl_trans	# $0b-5 ERROR
-	short		tbl_trans - tbl_trans	# $0b-6 ERROR
-	short		tbl_trans - tbl_trans	# $0b-7 ERROR
-
-	short		sasin	 - tbl_trans	# $0c-0 fasin norm
-	short		src_zero - tbl_trans	# $0c-1 fasin zero
-	short		t_operr	 - tbl_trans	# $0c-2 fasin inf
-	short		src_qnan - tbl_trans	# $0c-3 fasin qnan
-	short		sasind	 - tbl_trans	# $0c-5 fasin denorm
-	short		src_snan - tbl_trans	# $0c-4 fasin snan
-	short		tbl_trans - tbl_trans	# $0c-6 fasin unnorm
-	short		tbl_trans - tbl_trans	# $0c-7 ERROR
-
-	short		satanh	 - tbl_trans	# $0d-0 fatanh norm
-	short		src_zero - tbl_trans	# $0d-1 fatanh zero
-	short		t_operr	 - tbl_trans	# $0d-2 fatanh inf
-	short		src_qnan - tbl_trans	# $0d-3 fatanh qnan
-	short		satanhd	 - tbl_trans	# $0d-5 fatanh denorm
-	short		src_snan - tbl_trans	# $0d-4 fatanh snan
-	short		tbl_trans - tbl_trans	# $0d-6 fatanh unnorm
-	short		tbl_trans - tbl_trans	# $0d-7 ERROR
-
-	short		ssin	 - tbl_trans	# $0e-0 fsin norm
-	short		src_zero - tbl_trans	# $0e-1 fsin zero
-	short		t_operr	 - tbl_trans	# $0e-2 fsin inf
-	short		src_qnan - tbl_trans	# $0e-3 fsin qnan
-	short		ssind	 - tbl_trans	# $0e-5 fsin denorm
-	short		src_snan - tbl_trans	# $0e-4 fsin snan
-	short		tbl_trans - tbl_trans	# $0e-6 fsin unnorm
-	short		tbl_trans - tbl_trans	# $0e-7 ERROR
-
-	short		stan	 - tbl_trans	# $0f-0 ftan norm
-	short		src_zero - tbl_trans	# $0f-1 ftan zero
-	short		t_operr	 - tbl_trans	# $0f-2 ftan inf
-	short		src_qnan - tbl_trans	# $0f-3 ftan qnan
-	short		stand	 - tbl_trans	# $0f-5 ftan denorm
-	short		src_snan - tbl_trans	# $0f-4 ftan snan
-	short		tbl_trans - tbl_trans	# $0f-6 ftan unnorm
-	short		tbl_trans - tbl_trans	# $0f-7 ERROR
-
-	short		setox	 - tbl_trans	# $10-0 fetox norm
-	short		ld_pone	 - tbl_trans	# $10-1 fetox zero
-	short		szr_inf	 - tbl_trans	# $10-2 fetox inf
-	short		src_qnan - tbl_trans	# $10-3 fetox qnan
-	short		setoxd	 - tbl_trans	# $10-5 fetox denorm
-	short		src_snan - tbl_trans	# $10-4 fetox snan
-	short		tbl_trans - tbl_trans	# $10-6 fetox unnorm
-	short		tbl_trans - tbl_trans	# $10-7 ERROR
-
-	short		stwotox	 - tbl_trans	# $11-0 ftwotox norm
-	short		ld_pone	 - tbl_trans	# $11-1 ftwotox zero
-	short		szr_inf	 - tbl_trans	# $11-2 ftwotox inf
-	short		src_qnan - tbl_trans	# $11-3 ftwotox qnan
-	short		stwotoxd - tbl_trans	# $11-5 ftwotox denorm
-	short		src_snan - tbl_trans	# $11-4 ftwotox snan
-	short		tbl_trans - tbl_trans	# $11-6 ftwotox unnorm
-	short		tbl_trans - tbl_trans	# $11-7 ERROR
-
-	short		stentox	 - tbl_trans	# $12-0 ftentox norm
-	short		ld_pone	 - tbl_trans	# $12-1 ftentox zero
-	short		szr_inf	 - tbl_trans	# $12-2 ftentox inf
-	short		src_qnan - tbl_trans	# $12-3 ftentox qnan
-	short		stentoxd - tbl_trans	# $12-5 ftentox denorm
-	short		src_snan - tbl_trans	# $12-4 ftentox snan
-	short		tbl_trans - tbl_trans	# $12-6 ftentox unnorm
-	short		tbl_trans - tbl_trans	# $12-7 ERROR
-
-	short		tbl_trans - tbl_trans	# $13-0 ERROR
-	short		tbl_trans - tbl_trans	# $13-1 ERROR
-	short		tbl_trans - tbl_trans	# $13-2 ERROR
-	short		tbl_trans - tbl_trans	# $13-3 ERROR
-	short		tbl_trans - tbl_trans	# $13-4 ERROR
-	short		tbl_trans - tbl_trans	# $13-5 ERROR
-	short		tbl_trans - tbl_trans	# $13-6 ERROR
-	short		tbl_trans - tbl_trans	# $13-7 ERROR
-
-	short		slogn	 - tbl_trans	# $14-0 flogn norm
-	short		t_dz2	 - tbl_trans	# $14-1 flogn zero
-	short		sopr_inf - tbl_trans	# $14-2 flogn inf
-	short		src_qnan - tbl_trans	# $14-3 flogn qnan
-	short		slognd	 - tbl_trans	# $14-5 flogn denorm
-	short		src_snan - tbl_trans	# $14-4 flogn snan
-	short		tbl_trans - tbl_trans	# $14-6 flogn unnorm
-	short		tbl_trans - tbl_trans	# $14-7 ERROR
-
-	short		slog10	 - tbl_trans	# $15-0 flog10 norm
-	short		t_dz2	 - tbl_trans	# $15-1 flog10 zero
-	short		sopr_inf - tbl_trans	# $15-2 flog10 inf
-	short		src_qnan - tbl_trans	# $15-3 flog10 qnan
-	short		slog10d	 - tbl_trans	# $15-5 flog10 denorm
-	short		src_snan - tbl_trans	# $15-4 flog10 snan
-	short		tbl_trans - tbl_trans	# $15-6 flog10 unnorm
-	short		tbl_trans - tbl_trans	# $15-7 ERROR
-
-	short		slog2	 - tbl_trans	# $16-0 flog2 norm
-	short		t_dz2	 - tbl_trans	# $16-1 flog2 zero
-	short		sopr_inf - tbl_trans	# $16-2 flog2 inf
-	short		src_qnan - tbl_trans	# $16-3 flog2 qnan
-	short		slog2d	 - tbl_trans	# $16-5 flog2 denorm
-	short		src_snan - tbl_trans	# $16-4 flog2 snan
-	short		tbl_trans - tbl_trans	# $16-6 flog2 unnorm
-	short		tbl_trans - tbl_trans	# $16-7 ERROR
-
-	short		tbl_trans - tbl_trans	# $17-0 ERROR
-	short		tbl_trans - tbl_trans	# $17-1 ERROR
-	short		tbl_trans - tbl_trans	# $17-2 ERROR
-	short		tbl_trans - tbl_trans	# $17-3 ERROR
-	short		tbl_trans - tbl_trans	# $17-4 ERROR
-	short		tbl_trans - tbl_trans	# $17-5 ERROR
-	short		tbl_trans - tbl_trans	# $17-6 ERROR
-	short		tbl_trans - tbl_trans	# $17-7 ERROR
-
-	short		tbl_trans - tbl_trans	# $18-0 fabs norm
-	short		tbl_trans - tbl_trans	# $18-1 fabs zero
-	short		tbl_trans - tbl_trans	# $18-2 fabs inf
-	short		tbl_trans - tbl_trans	# $18-3 fabs qnan
-	short		tbl_trans - tbl_trans	# $18-5 fabs denorm
-	short		tbl_trans - tbl_trans	# $18-4 fabs snan
-	short		tbl_trans - tbl_trans	# $18-6 fabs unnorm
-	short		tbl_trans - tbl_trans	# $18-7 ERROR
-
-	short		scosh	 - tbl_trans	# $19-0 fcosh norm
-	short		ld_pone	 - tbl_trans	# $19-1 fcosh zero
-	short		ld_pinf	 - tbl_trans	# $19-2 fcosh inf
-	short		src_qnan - tbl_trans	# $19-3 fcosh qnan
-	short		scoshd	 - tbl_trans	# $19-5 fcosh denorm
-	short		src_snan - tbl_trans	# $19-4 fcosh snan
-	short		tbl_trans - tbl_trans	# $19-6 fcosh unnorm
-	short		tbl_trans - tbl_trans	# $19-7 ERROR
-
-	short		tbl_trans - tbl_trans	# $1a-0 fneg norm
-	short		tbl_trans - tbl_trans	# $1a-1 fneg zero
-	short		tbl_trans - tbl_trans	# $1a-2 fneg inf
-	short		tbl_trans - tbl_trans	# $1a-3 fneg qnan
-	short		tbl_trans - tbl_trans	# $1a-5 fneg denorm
-	short		tbl_trans - tbl_trans	# $1a-4 fneg snan
-	short		tbl_trans - tbl_trans	# $1a-6 fneg unnorm
-	short		tbl_trans - tbl_trans	# $1a-7 ERROR
-
-	short		tbl_trans - tbl_trans	# $1b-0 ERROR
-	short		tbl_trans - tbl_trans	# $1b-1 ERROR
-	short		tbl_trans - tbl_trans	# $1b-2 ERROR
-	short		tbl_trans - tbl_trans	# $1b-3 ERROR
-	short		tbl_trans - tbl_trans	# $1b-4 ERROR
-	short		tbl_trans - tbl_trans	# $1b-5 ERROR
-	short		tbl_trans - tbl_trans	# $1b-6 ERROR
-	short		tbl_trans - tbl_trans	# $1b-7 ERROR
-
-	short		sacos	 - tbl_trans	# $1c-0 facos norm
-	short		ld_ppi2	 - tbl_trans	# $1c-1 facos zero
-	short		t_operr	 - tbl_trans	# $1c-2 facos inf
-	short		src_qnan - tbl_trans	# $1c-3 facos qnan
-	short		sacosd	 - tbl_trans	# $1c-5 facos denorm
-	short		src_snan - tbl_trans	# $1c-4 facos snan
-	short		tbl_trans - tbl_trans	# $1c-6 facos unnorm
-	short		tbl_trans - tbl_trans	# $1c-7 ERROR
-
-	short		scos	 - tbl_trans	# $1d-0 fcos norm
-	short		ld_pone	 - tbl_trans	# $1d-1 fcos zero
-	short		t_operr	 - tbl_trans	# $1d-2 fcos inf
-	short		src_qnan - tbl_trans	# $1d-3 fcos qnan
-	short		scosd	 - tbl_trans	# $1d-5 fcos denorm
-	short		src_snan - tbl_trans	# $1d-4 fcos snan
-	short		tbl_trans - tbl_trans	# $1d-6 fcos unnorm
-	short		tbl_trans - tbl_trans	# $1d-7 ERROR
-
-	short		sgetexp	 - tbl_trans	# $1e-0 fgetexp norm
-	short		src_zero - tbl_trans	# $1e-1 fgetexp zero
-	short		t_operr	 - tbl_trans	# $1e-2 fgetexp inf
-	short		src_qnan - tbl_trans	# $1e-3 fgetexp qnan
-	short		sgetexpd - tbl_trans	# $1e-5 fgetexp denorm
-	short		src_snan - tbl_trans	# $1e-4 fgetexp snan
-	short		tbl_trans - tbl_trans	# $1e-6 fgetexp unnorm
-	short		tbl_trans - tbl_trans	# $1e-7 ERROR
-
-	short		sgetman	 - tbl_trans	# $1f-0 fgetman norm
-	short		src_zero - tbl_trans	# $1f-1 fgetman zero
-	short		t_operr	 - tbl_trans	# $1f-2 fgetman inf
-	short		src_qnan - tbl_trans	# $1f-3 fgetman qnan
-	short		sgetmand - tbl_trans	# $1f-5 fgetman denorm
-	short		src_snan - tbl_trans	# $1f-4 fgetman snan
-	short		tbl_trans - tbl_trans	# $1f-6 fgetman unnorm
-	short		tbl_trans - tbl_trans	# $1f-7 ERROR
-
-	short		tbl_trans - tbl_trans	# $20-0 fdiv norm
-	short		tbl_trans - tbl_trans	# $20-1 fdiv zero
-	short		tbl_trans - tbl_trans	# $20-2 fdiv inf
-	short		tbl_trans - tbl_trans	# $20-3 fdiv qnan
-	short		tbl_trans - tbl_trans	# $20-5 fdiv denorm
-	short		tbl_trans - tbl_trans	# $20-4 fdiv snan
-	short		tbl_trans - tbl_trans	# $20-6 fdiv unnorm
-	short		tbl_trans - tbl_trans	# $20-7 ERROR
-
-	short		smod_snorm - tbl_trans	# $21-0 fmod norm
-	short		smod_szero - tbl_trans	# $21-1 fmod zero
-	short		smod_sinf - tbl_trans	# $21-2 fmod inf
-	short		sop_sqnan - tbl_trans	# $21-3 fmod qnan
-	short		smod_sdnrm - tbl_trans	# $21-5 fmod denorm
-	short		sop_ssnan - tbl_trans	# $21-4 fmod snan
-	short		tbl_trans - tbl_trans	# $21-6 fmod unnorm
-	short		tbl_trans - tbl_trans	# $21-7 ERROR
-
-	short		tbl_trans - tbl_trans	# $22-0 fadd norm
-	short		tbl_trans - tbl_trans	# $22-1 fadd zero
-	short		tbl_trans - tbl_trans	# $22-2 fadd inf
-	short		tbl_trans - tbl_trans	# $22-3 fadd qnan
-	short		tbl_trans - tbl_trans	# $22-5 fadd denorm
-	short		tbl_trans - tbl_trans	# $22-4 fadd snan
-	short		tbl_trans - tbl_trans	# $22-6 fadd unnorm
-	short		tbl_trans - tbl_trans	# $22-7 ERROR
-
-	short		tbl_trans - tbl_trans	# $23-0 fmul norm
-	short		tbl_trans - tbl_trans	# $23-1 fmul zero
-	short		tbl_trans - tbl_trans	# $23-2 fmul inf
-	short		tbl_trans - tbl_trans	# $23-3 fmul qnan
-	short		tbl_trans - tbl_trans	# $23-5 fmul denorm
-	short		tbl_trans - tbl_trans	# $23-4 fmul snan
-	short		tbl_trans - tbl_trans	# $23-6 fmul unnorm
-	short		tbl_trans - tbl_trans	# $23-7 ERROR
-
-	short		tbl_trans - tbl_trans	# $24-0 fsgldiv norm
-	short		tbl_trans - tbl_trans	# $24-1 fsgldiv zero
-	short		tbl_trans - tbl_trans	# $24-2 fsgldiv inf
-	short		tbl_trans - tbl_trans	# $24-3 fsgldiv qnan
-	short		tbl_trans - tbl_trans	# $24-5 fsgldiv denorm
-	short		tbl_trans - tbl_trans	# $24-4 fsgldiv snan
-	short		tbl_trans - tbl_trans	# $24-6 fsgldiv unnorm
-	short		tbl_trans - tbl_trans	# $24-7 ERROR
-
-	short		srem_snorm - tbl_trans	# $25-0 frem norm
-	short		srem_szero - tbl_trans	# $25-1 frem zero
-	short		srem_sinf - tbl_trans	# $25-2 frem inf
-	short		sop_sqnan - tbl_trans	# $25-3 frem qnan
-	short		srem_sdnrm - tbl_trans	# $25-5 frem denorm
-	short		sop_ssnan - tbl_trans	# $25-4 frem snan
-	short		tbl_trans - tbl_trans	# $25-6 frem unnorm
-	short		tbl_trans - tbl_trans	# $25-7 ERROR
-
-	short		sscale_snorm - tbl_trans # $26-0 fscale norm
-	short		sscale_szero - tbl_trans # $26-1 fscale zero
-	short		sscale_sinf - tbl_trans	# $26-2 fscale inf
-	short		sop_sqnan - tbl_trans	# $26-3 fscale qnan
-	short		sscale_sdnrm - tbl_trans # $26-5 fscale denorm
-	short		sop_ssnan - tbl_trans	# $26-4 fscale snan
-	short		tbl_trans - tbl_trans	# $26-6 fscale unnorm
-	short		tbl_trans - tbl_trans	# $26-7 ERROR
-
-	short		tbl_trans - tbl_trans	# $27-0 fsglmul norm
-	short		tbl_trans - tbl_trans	# $27-1 fsglmul zero
-	short		tbl_trans - tbl_trans	# $27-2 fsglmul inf
-	short		tbl_trans - tbl_trans	# $27-3 fsglmul qnan
-	short		tbl_trans - tbl_trans	# $27-5 fsglmul denorm
-	short		tbl_trans - tbl_trans	# $27-4 fsglmul snan
-	short		tbl_trans - tbl_trans	# $27-6 fsglmul unnorm
-	short		tbl_trans - tbl_trans	# $27-7 ERROR
-
-	short		tbl_trans - tbl_trans	# $28-0 fsub norm
-	short		tbl_trans - tbl_trans	# $28-1 fsub zero
-	short		tbl_trans - tbl_trans	# $28-2 fsub inf
-	short		tbl_trans - tbl_trans	# $28-3 fsub qnan
-	short		tbl_trans - tbl_trans	# $28-5 fsub denorm
-	short		tbl_trans - tbl_trans	# $28-4 fsub snan
-	short		tbl_trans - tbl_trans	# $28-6 fsub unnorm
-	short		tbl_trans - tbl_trans	# $28-7 ERROR
-
-	short		tbl_trans - tbl_trans	# $29-0 ERROR
-	short		tbl_trans - tbl_trans	# $29-1 ERROR
-	short		tbl_trans - tbl_trans	# $29-2 ERROR
-	short		tbl_trans - tbl_trans	# $29-3 ERROR
-	short		tbl_trans - tbl_trans	# $29-4 ERROR
-	short		tbl_trans - tbl_trans	# $29-5 ERROR
-	short		tbl_trans - tbl_trans	# $29-6 ERROR
-	short		tbl_trans - tbl_trans	# $29-7 ERROR
-
-	short		tbl_trans - tbl_trans	# $2a-0 ERROR
-	short		tbl_trans - tbl_trans	# $2a-1 ERROR
-	short		tbl_trans - tbl_trans	# $2a-2 ERROR
-	short		tbl_trans - tbl_trans	# $2a-3 ERROR
-	short		tbl_trans - tbl_trans	# $2a-4 ERROR
-	short		tbl_trans - tbl_trans	# $2a-5 ERROR
-	short		tbl_trans - tbl_trans	# $2a-6 ERROR
-	short		tbl_trans - tbl_trans	# $2a-7 ERROR
-
-	short		tbl_trans - tbl_trans	# $2b-0 ERROR
-	short		tbl_trans - tbl_trans	# $2b-1 ERROR
-	short		tbl_trans - tbl_trans	# $2b-2 ERROR
-	short		tbl_trans - tbl_trans	# $2b-3 ERROR
-	short		tbl_trans - tbl_trans	# $2b-4 ERROR
-	short		tbl_trans - tbl_trans	# $2b-5 ERROR
-	short		tbl_trans - tbl_trans	# $2b-6 ERROR
-	short		tbl_trans - tbl_trans	# $2b-7 ERROR
-
-	short		tbl_trans - tbl_trans	# $2c-0 ERROR
-	short		tbl_trans - tbl_trans	# $2c-1 ERROR
-	short		tbl_trans - tbl_trans	# $2c-2 ERROR
-	short		tbl_trans - tbl_trans	# $2c-3 ERROR
-	short		tbl_trans - tbl_trans	# $2c-4 ERROR
-	short		tbl_trans - tbl_trans	# $2c-5 ERROR
-	short		tbl_trans - tbl_trans	# $2c-6 ERROR
-	short		tbl_trans - tbl_trans	# $2c-7 ERROR
-
-	short		tbl_trans - tbl_trans	# $2d-0 ERROR
-	short		tbl_trans - tbl_trans	# $2d-1 ERROR
-	short		tbl_trans - tbl_trans	# $2d-2 ERROR
-	short		tbl_trans - tbl_trans	# $2d-3 ERROR
-	short		tbl_trans - tbl_trans	# $2d-4 ERROR
-	short		tbl_trans - tbl_trans	# $2d-5 ERROR
-	short		tbl_trans - tbl_trans	# $2d-6 ERROR
-	short		tbl_trans - tbl_trans	# $2d-7 ERROR
-
-	short		tbl_trans - tbl_trans	# $2e-0 ERROR
-	short		tbl_trans - tbl_trans	# $2e-1 ERROR
-	short		tbl_trans - tbl_trans	# $2e-2 ERROR
-	short		tbl_trans - tbl_trans	# $2e-3 ERROR
-	short		tbl_trans - tbl_trans	# $2e-4 ERROR
-	short		tbl_trans - tbl_trans	# $2e-5 ERROR
-	short		tbl_trans - tbl_trans	# $2e-6 ERROR
-	short		tbl_trans - tbl_trans	# $2e-7 ERROR
-
-	short		tbl_trans - tbl_trans	# $2f-0 ERROR
-	short		tbl_trans - tbl_trans	# $2f-1 ERROR
-	short		tbl_trans - tbl_trans	# $2f-2 ERROR
-	short		tbl_trans - tbl_trans	# $2f-3 ERROR
-	short		tbl_trans - tbl_trans	# $2f-4 ERROR
-	short		tbl_trans - tbl_trans	# $2f-5 ERROR
-	short		tbl_trans - tbl_trans	# $2f-6 ERROR
-	short		tbl_trans - tbl_trans	# $2f-7 ERROR
-
-	short		ssincos	 - tbl_trans	# $30-0 fsincos norm
-	short		ssincosz - tbl_trans	# $30-1 fsincos zero
-	short		ssincosi - tbl_trans	# $30-2 fsincos inf
-	short		ssincosqnan - tbl_trans	# $30-3 fsincos qnan
-	short		ssincosd - tbl_trans	# $30-5 fsincos denorm
-	short		ssincossnan - tbl_trans	# $30-4 fsincos snan
-	short		tbl_trans - tbl_trans	# $30-6 fsincos unnorm
-	short		tbl_trans - tbl_trans	# $30-7 ERROR
-
-	short		ssincos	 - tbl_trans	# $31-0 fsincos norm
-	short		ssincosz - tbl_trans	# $31-1 fsincos zero
-	short		ssincosi - tbl_trans	# $31-2 fsincos inf
-	short		ssincosqnan - tbl_trans	# $31-3 fsincos qnan
-	short		ssincosd - tbl_trans	# $31-5 fsincos denorm
-	short		ssincossnan - tbl_trans	# $31-4 fsincos snan
-	short		tbl_trans - tbl_trans	# $31-6 fsincos unnorm
-	short		tbl_trans - tbl_trans	# $31-7 ERROR
-
-	short		ssincos	 - tbl_trans	# $32-0 fsincos norm
-	short		ssincosz - tbl_trans	# $32-1 fsincos zero
-	short		ssincosi - tbl_trans	# $32-2 fsincos inf
-	short		ssincosqnan - tbl_trans	# $32-3 fsincos qnan
-	short		ssincosd - tbl_trans	# $32-5 fsincos denorm
-	short		ssincossnan - tbl_trans	# $32-4 fsincos snan
-	short		tbl_trans - tbl_trans	# $32-6 fsincos unnorm
-	short		tbl_trans - tbl_trans	# $32-7 ERROR
-
-	short		ssincos	 - tbl_trans	# $33-0 fsincos norm
-	short		ssincosz - tbl_trans	# $33-1 fsincos zero
-	short		ssincosi - tbl_trans	# $33-2 fsincos inf
-	short		ssincosqnan - tbl_trans	# $33-3 fsincos qnan
-	short		ssincosd - tbl_trans	# $33-5 fsincos denorm
-	short		ssincossnan - tbl_trans	# $33-4 fsincos snan
-	short		tbl_trans - tbl_trans	# $33-6 fsincos unnorm
-	short		tbl_trans - tbl_trans	# $33-7 ERROR
-
-	short		ssincos	 - tbl_trans	# $34-0 fsincos norm
-	short		ssincosz - tbl_trans	# $34-1 fsincos zero
-	short		ssincosi - tbl_trans	# $34-2 fsincos inf
-	short		ssincosqnan - tbl_trans	# $34-3 fsincos qnan
-	short		ssincosd - tbl_trans	# $34-5 fsincos denorm
-	short		ssincossnan - tbl_trans	# $34-4 fsincos snan
-	short		tbl_trans - tbl_trans	# $34-6 fsincos unnorm
-	short		tbl_trans - tbl_trans	# $34-7 ERROR
-
-	short		ssincos	 - tbl_trans	# $35-0 fsincos norm
-	short		ssincosz - tbl_trans	# $35-1 fsincos zero
-	short		ssincosi - tbl_trans	# $35-2 fsincos inf
-	short		ssincosqnan - tbl_trans	# $35-3 fsincos qnan
-	short		ssincosd - tbl_trans	# $35-5 fsincos denorm
-	short		ssincossnan - tbl_trans	# $35-4 fsincos snan
-	short		tbl_trans - tbl_trans	# $35-6 fsincos unnorm
-	short		tbl_trans - tbl_trans	# $35-7 ERROR
-
-	short		ssincos	 - tbl_trans	# $36-0 fsincos norm
-	short		ssincosz - tbl_trans	# $36-1 fsincos zero
-	short		ssincosi - tbl_trans	# $36-2 fsincos inf
-	short		ssincosqnan - tbl_trans	# $36-3 fsincos qnan
-	short		ssincosd - tbl_trans	# $36-5 fsincos denorm
-	short		ssincossnan - tbl_trans	# $36-4 fsincos snan
-	short		tbl_trans - tbl_trans	# $36-6 fsincos unnorm
-	short		tbl_trans - tbl_trans	# $36-7 ERROR
-
-	short		ssincos	 - tbl_trans	# $37-0 fsincos norm
-	short		ssincosz - tbl_trans	# $37-1 fsincos zero
-	short		ssincosi - tbl_trans	# $37-2 fsincos inf
-	short		ssincosqnan - tbl_trans	# $37-3 fsincos qnan
-	short		ssincosd - tbl_trans	# $37-5 fsincos denorm
-	short		ssincossnan - tbl_trans	# $37-4 fsincos snan
-	short		tbl_trans - tbl_trans	# $37-6 fsincos unnorm
-	short		tbl_trans - tbl_trans	# $37-7 ERROR
-
-##########
-
-# the instruction fetch access for the displacement word for the
-# fdbcc emulation failed. here, we create an access error frame
-# from the current frame and branch to _real_access().
-funimp_iacc:
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
-	fmovm.x		EXC_FPREGS(%a6),&0xc0	# restore fp0-fp1
-
-	mov.l		USER_FPIAR(%a6),EXC_PC(%a6) # store current PC
-
-	unlk		%a6
-
-	mov.l		(%sp),-(%sp)		# store SR,hi(PC)
-	mov.w		0x8(%sp),0x4(%sp)	# store lo(PC)
-	mov.w		&0x4008,0x6(%sp)	# store voff
-	mov.l		0x2(%sp),0x8(%sp)	# store EA
-	mov.l		&0x09428001,0xc(%sp)	# store FSLW
-
-	btst		&0x5,(%sp)		# user or supervisor mode?
-	beq.b		funimp_iacc_end		# user
-	bset		&0x2,0xd(%sp)		# set supervisor TM bit
-
-funimp_iacc_end:
-	bra.l		_real_access
-
-#########################################################################
-# ssin():     computes the sine of a normalized input			#
-# ssind():    computes the sine of a denormalized input			#
-# scos():     computes the cosine of a normalized input			#
-# scosd():    computes the cosine of a denormalized input		#
-# ssincos():  computes the sine and cosine of a normalized input	#
-# ssincosd(): computes the sine and cosine of a denormalized input	#
-#									#
-# INPUT *************************************************************** #
-#	a0 = pointer to extended precision input			#
-#	d0 = round precision,mode					#
-#									#
-# OUTPUT ************************************************************** #
-#	fp0 = sin(X) or cos(X)						#
-#									#
-#    For ssincos(X):							#
-#	fp0 = sin(X)							#
-#	fp1 = cos(X)							#
-#									#
-# ACCURACY and MONOTONICITY ******************************************* #
-#	The returned result is within 1 ulp in 64 significant bit, i.e.	#
-#	within 0.5001 ulp to 53 bits if the result is subsequently	#
-#	rounded to double precision. The result is provably monotonic	#
-#	in double precision.						#
-#									#
-# ALGORITHM ***********************************************************	#
-#									#
-#	SIN and COS:							#
-#	1. If SIN is invoked, set AdjN := 0; otherwise, set AdjN := 1.	#
-#									#
-#	2. If |X| >= 15Pi or |X| < 2**(-40), go to 7.			#
-#									#
-#	3. Decompose X as X = N(Pi/2) + r where |r| <= Pi/4. Let	#
-#		k = N mod 4, so in particular, k = 0,1,2,or 3.		#
-#		Overwrite k by k := k + AdjN.				#
-#									#
-#	4. If k is even, go to 6.					#
-#									#
-#	5. (k is odd) Set j := (k-1)/2, sgn := (-1)**j.			#
-#		Return sgn*cos(r) where cos(r) is approximated by an	#
-#		even polynomial in r, 1 + r*r*(B1+s*(B2+ ... + s*B8)),	#
-#		s = r*r.						#
-#		Exit.							#
-#									#
-#	6. (k is even) Set j := k/2, sgn := (-1)**j. Return sgn*sin(r)	#
-#		where sin(r) is approximated by an odd polynomial in r	#
-#		r + r*s*(A1+s*(A2+ ... + s*A7)),	s = r*r.	#
-#		Exit.							#
-#									#
-#	7. If |X| > 1, go to 9.						#
-#									#
-#	8. (|X|<2**(-40)) If SIN is invoked, return X;			#
-#		otherwise return 1.					#
-#									#
-#	9. Overwrite X by X := X rem 2Pi. Now that |X| <= Pi,		#
-#		go back to 3.						#
-#									#
-#	SINCOS:								#
-#	1. If |X| >= 15Pi or |X| < 2**(-40), go to 6.			#
-#									#
-#	2. Decompose X as X = N(Pi/2) + r where |r| <= Pi/4. Let	#
-#		k = N mod 4, so in particular, k = 0,1,2,or 3.		#
-#									#
-#	3. If k is even, go to 5.					#
-#									#
-#	4. (k is odd) Set j1 := (k-1)/2, j2 := j1 (EOR) (k mod 2), ie.	#
-#		j1 exclusive or with the l.s.b. of k.			#
-#		sgn1 := (-1)**j1, sgn2 := (-1)**j2.			#
-#		SIN(X) = sgn1 * cos(r) and COS(X) = sgn2*sin(r) where	#
-#		sin(r) and cos(r) are computed as odd and even		#
-#		polynomials in r, respectively. Exit			#
-#									#
-#	5. (k is even) Set j1 := k/2, sgn1 := (-1)**j1.			#
-#		SIN(X) = sgn1 * sin(r) and COS(X) = sgn1*cos(r) where	#
-#		sin(r) and cos(r) are computed as odd and even		#
-#		polynomials in r, respectively. Exit			#
-#									#
-#	6. If |X| > 1, go to 8.						#
-#									#
-#	7. (|X|<2**(-40)) SIN(X) = X and COS(X) = 1. Exit.		#
-#									#
-#	8. Overwrite X by X := X rem 2Pi. Now that |X| <= Pi,		#
-#		go back to 2.						#
-#									#
-#########################################################################
-
-SINA7:	long		0xBD6AAA77,0xCCC994F5
-SINA6:	long		0x3DE61209,0x7AAE8DA1
-SINA5:	long		0xBE5AE645,0x2A118AE4
-SINA4:	long		0x3EC71DE3,0xA5341531
-SINA3:	long		0xBF2A01A0,0x1A018B59,0x00000000,0x00000000
-SINA2:	long		0x3FF80000,0x88888888,0x888859AF,0x00000000
-SINA1:	long		0xBFFC0000,0xAAAAAAAA,0xAAAAAA99,0x00000000
-
-COSB8:	long		0x3D2AC4D0,0xD6011EE3
-COSB7:	long		0xBDA9396F,0x9F45AC19
-COSB6:	long		0x3E21EED9,0x0612C972
-COSB5:	long		0xBE927E4F,0xB79D9FCF
-COSB4:	long		0x3EFA01A0,0x1A01D423,0x00000000,0x00000000
-COSB3:	long		0xBFF50000,0xB60B60B6,0x0B61D438,0x00000000
-COSB2:	long		0x3FFA0000,0xAAAAAAAA,0xAAAAAB5E
-COSB1:	long		0xBF000000
-
-	set		INARG,FP_SCR0
-
-	set		X,FP_SCR0
-#	set		XDCARE,X+2
-	set		XFRAC,X+4
-
-	set		RPRIME,FP_SCR0
-	set		SPRIME,FP_SCR1
-
-	set		POSNEG1,L_SCR1
-	set		TWOTO63,L_SCR1
-
-	set		ENDFLAG,L_SCR2
-	set		INT,L_SCR2
-
-	set		ADJN,L_SCR3
-
-############################################
-	global		ssin
-ssin:
-	mov.l		&0,ADJN(%a6)		# yes; SET ADJN TO 0
-	bra.b		SINBGN
-
-############################################
-	global		scos
-scos:
-	mov.l		&1,ADJN(%a6)		# yes; SET ADJN TO 1
-
-############################################
-SINBGN:
-#--SAVE FPCR, FP1. CHECK IF |X| IS TOO SMALL OR LARGE
-
-	fmov.x		(%a0),%fp0		# LOAD INPUT
-	fmov.x		%fp0,X(%a6)		# save input at X
-
-# "COMPACTIFY" X
-	mov.l		(%a0),%d1		# put exp in hi word
-	mov.w		4(%a0),%d1		# fetch hi(man)
-	and.l		&0x7FFFFFFF,%d1		# strip sign
-
-	cmpi.l		%d1,&0x3FD78000		# is |X| >= 2**(-40)?
-	bge.b		SOK1			# no
-	bra.w		SINSM			# yes; input is very small
-
-SOK1:
-	cmp.l		%d1,&0x4004BC7E		# is |X| < 15 PI?
-	blt.b		SINMAIN			# no
-	bra.w		SREDUCEX		# yes; input is very large
-
-#--THIS IS THE USUAL CASE, |X| <= 15 PI.
-#--THE ARGUMENT REDUCTION IS DONE BY TABLE LOOK UP.
-SINMAIN:
-	fmov.x		%fp0,%fp1
-	fmul.d		TWOBYPI(%pc),%fp1	# X*2/PI
-
-	lea		PITBL+0x200(%pc),%a1	# TABLE OF N*PI/2, N = -32,...,32
-
-	fmov.l		%fp1,INT(%a6)		# CONVERT TO INTEGER
-
-	mov.l		INT(%a6),%d1		# make a copy of N
-	asl.l		&4,%d1			# N *= 16
-	add.l		%d1,%a1			# tbl_addr = a1 + (N*16)
-
-# A1 IS THE ADDRESS OF N*PIBY2
-# ...WHICH IS IN TWO PIECES Y1 & Y2
-	fsub.x		(%a1)+,%fp0		# X-Y1
-	fsub.s		(%a1),%fp0		# fp0 = R = (X-Y1)-Y2
-
-SINCONT:
-#--continuation from REDUCEX
-
-#--GET N+ADJN AND SEE IF SIN(R) OR COS(R) IS NEEDED
-	mov.l		INT(%a6),%d1
-	add.l		ADJN(%a6),%d1		# SEE IF D0 IS ODD OR EVEN
-	ror.l		&1,%d1			# D0 WAS ODD IFF D0 IS NEGATIVE
-	cmp.l		%d1,&0
-	blt.w		COSPOLY
-
-#--LET J BE THE LEAST SIG. BIT OF D0, LET SGN := (-1)**J.
-#--THEN WE RETURN	SGN*SIN(R). SGN*SIN(R) IS COMPUTED BY
-#--R' + R'*S*(A1 + S(A2 + S(A3 + S(A4 + ... + SA7)))), WHERE
-#--R' = SGN*R, S=R*R. THIS CAN BE REWRITTEN AS
-#--R' + R'*S*( [A1+T(A3+T(A5+TA7))] + [S(A2+T(A4+TA6))])
-#--WHERE T=S*S.
-#--NOTE THAT A3 THROUGH A7 ARE STORED IN DOUBLE PRECISION
-#--WHILE A1 AND A2 ARE IN DOUBLE-EXTENDED FORMAT.
-SINPOLY:
-	fmovm.x		&0x0c,-(%sp)		# save fp2/fp3
-
-	fmov.x		%fp0,X(%a6)		# X IS R
-	fmul.x		%fp0,%fp0		# FP0 IS S
-
-	fmov.d		SINA7(%pc),%fp3
-	fmov.d		SINA6(%pc),%fp2
-
-	fmov.x		%fp0,%fp1
-	fmul.x		%fp1,%fp1		# FP1 IS T
-
-	ror.l		&1,%d1
-	and.l		&0x80000000,%d1
-# ...LEAST SIG. BIT OF D0 IN SIGN POSITION
-	eor.l		%d1,X(%a6)		# X IS NOW R'= SGN*R
-
-	fmul.x		%fp1,%fp3		# TA7
-	fmul.x		%fp1,%fp2		# TA6
-
-	fadd.d		SINA5(%pc),%fp3		# A5+TA7
-	fadd.d		SINA4(%pc),%fp2		# A4+TA6
-
-	fmul.x		%fp1,%fp3		# T(A5+TA7)
-	fmul.x		%fp1,%fp2		# T(A4+TA6)
-
-	fadd.d		SINA3(%pc),%fp3		# A3+T(A5+TA7)
-	fadd.x		SINA2(%pc),%fp2		# A2+T(A4+TA6)
-
-	fmul.x		%fp3,%fp1		# T(A3+T(A5+TA7))
-
-	fmul.x		%fp0,%fp2		# S(A2+T(A4+TA6))
-	fadd.x		SINA1(%pc),%fp1		# A1+T(A3+T(A5+TA7))
-	fmul.x		X(%a6),%fp0		# R'*S
-
-	fadd.x		%fp2,%fp1		# [A1+T(A3+T(A5+TA7))]+[S(A2+T(A4+TA6))]
-
-	fmul.x		%fp1,%fp0		# SIN(R')-R'
-
-	fmovm.x		(%sp)+,&0x30		# restore fp2/fp3
-
-	fmov.l		%d0,%fpcr		# restore users round mode,prec
-	fadd.x		X(%a6),%fp0		# last inst - possible exception set
-	bra		t_inx2
-
-#--LET J BE THE LEAST SIG. BIT OF D0, LET SGN := (-1)**J.
-#--THEN WE RETURN	SGN*COS(R). SGN*COS(R) IS COMPUTED BY
-#--SGN + S'*(B1 + S(B2 + S(B3 + S(B4 + ... + SB8)))), WHERE
-#--S=R*R AND S'=SGN*S. THIS CAN BE REWRITTEN AS
-#--SGN + S'*([B1+T(B3+T(B5+TB7))] + [S(B2+T(B4+T(B6+TB8)))])
-#--WHERE T=S*S.
-#--NOTE THAT B4 THROUGH B8 ARE STORED IN DOUBLE PRECISION
-#--WHILE B2 AND B3 ARE IN DOUBLE-EXTENDED FORMAT, B1 IS -1/2
-#--AND IS THEREFORE STORED AS SINGLE PRECISION.
-COSPOLY:
-	fmovm.x		&0x0c,-(%sp)		# save fp2/fp3
-
-	fmul.x		%fp0,%fp0		# FP0 IS S
-
-	fmov.d		COSB8(%pc),%fp2
-	fmov.d		COSB7(%pc),%fp3
-
-	fmov.x		%fp0,%fp1
-	fmul.x		%fp1,%fp1		# FP1 IS T
-
-	fmov.x		%fp0,X(%a6)		# X IS S
-	ror.l		&1,%d1
-	and.l		&0x80000000,%d1
-# ...LEAST SIG. BIT OF D0 IN SIGN POSITION
-
-	fmul.x		%fp1,%fp2		# TB8
-
-	eor.l		%d1,X(%a6)		# X IS NOW S'= SGN*S
-	and.l		&0x80000000,%d1
-
-	fmul.x		%fp1,%fp3		# TB7
-
-	or.l		&0x3F800000,%d1		# D0 IS SGN IN SINGLE
-	mov.l		%d1,POSNEG1(%a6)
-
-	fadd.d		COSB6(%pc),%fp2		# B6+TB8
-	fadd.d		COSB5(%pc),%fp3		# B5+TB7
-
-	fmul.x		%fp1,%fp2		# T(B6+TB8)
-	fmul.x		%fp1,%fp3		# T(B5+TB7)
-
-	fadd.d		COSB4(%pc),%fp2		# B4+T(B6+TB8)
-	fadd.x		COSB3(%pc),%fp3		# B3+T(B5+TB7)
-
-	fmul.x		%fp1,%fp2		# T(B4+T(B6+TB8))
-	fmul.x		%fp3,%fp1		# T(B3+T(B5+TB7))
-
-	fadd.x		COSB2(%pc),%fp2		# B2+T(B4+T(B6+TB8))
-	fadd.s		COSB1(%pc),%fp1		# B1+T(B3+T(B5+TB7))
-
-	fmul.x		%fp2,%fp0		# S(B2+T(B4+T(B6+TB8)))
-
-	fadd.x		%fp1,%fp0
-
-	fmul.x		X(%a6),%fp0
-
-	fmovm.x		(%sp)+,&0x30		# restore fp2/fp3
-
-	fmov.l		%d0,%fpcr		# restore users round mode,prec
-	fadd.s		POSNEG1(%a6),%fp0	# last inst - possible exception set
-	bra		t_inx2
-
-##############################################
-
-# SINe: Big OR Small?
-#--IF |X| > 15PI, WE USE THE GENERAL ARGUMENT REDUCTION.
-#--IF |X| < 2**(-40), RETURN X OR 1.
-SINBORS:
-	cmp.l		%d1,&0x3FFF8000
-	bgt.l		SREDUCEX
-
-SINSM:
-	mov.l		ADJN(%a6),%d1
-	cmp.l		%d1,&0
-	bgt.b		COSTINY
-
-# here, the operation may underflow iff the precision is sgl or dbl.
-# extended denorms are handled through another entry point.
-SINTINY:
-#	mov.w		&0x0000,XDCARE(%a6)	# JUST IN CASE
-
-	fmov.l		%d0,%fpcr		# restore users round mode,prec
-	mov.b		&FMOV_OP,%d1		# last inst is MOVE
-	fmov.x		X(%a6),%fp0		# last inst - possible exception set
-	bra		t_catch
-
-COSTINY:
-	fmov.s		&0x3F800000,%fp0	# fp0 = 1.0
-	fmov.l		%d0,%fpcr		# restore users round mode,prec
-	fadd.s		&0x80800000,%fp0	# last inst - possible exception set
-	bra		t_pinx2
-
-################################################
-	global		ssind
-#--SIN(X) = X FOR DENORMALIZED X
-ssind:
-	bra		t_extdnrm
-
-############################################
-	global		scosd
-#--COS(X) = 1 FOR DENORMALIZED X
-scosd:
-	fmov.s		&0x3F800000,%fp0	# fp0 = 1.0
-	bra		t_pinx2
-
-##################################################
-
-	global		ssincos
-ssincos:
-#--SET ADJN TO 4
-	mov.l		&4,ADJN(%a6)
-
-	fmov.x		(%a0),%fp0		# LOAD INPUT
-	fmov.x		%fp0,X(%a6)
-
-	mov.l		(%a0),%d1
-	mov.w		4(%a0),%d1
-	and.l		&0x7FFFFFFF,%d1		# COMPACTIFY X
-
-	cmp.l		%d1,&0x3FD78000		# |X| >= 2**(-40)?
-	bge.b		SCOK1
-	bra.w		SCSM
-
-SCOK1:
-	cmp.l		%d1,&0x4004BC7E		# |X| < 15 PI?
-	blt.b		SCMAIN
-	bra.w		SREDUCEX
-
-
-#--THIS IS THE USUAL CASE, |X| <= 15 PI.
-#--THE ARGUMENT REDUCTION IS DONE BY TABLE LOOK UP.
-SCMAIN:
-	fmov.x		%fp0,%fp1
-
-	fmul.d		TWOBYPI(%pc),%fp1	# X*2/PI
-
-	lea		PITBL+0x200(%pc),%a1	# TABLE OF N*PI/2, N = -32,...,32
-
-	fmov.l		%fp1,INT(%a6)		# CONVERT TO INTEGER
-
-	mov.l		INT(%a6),%d1
-	asl.l		&4,%d1
-	add.l		%d1,%a1			# ADDRESS OF N*PIBY2, IN Y1, Y2
-
-	fsub.x		(%a1)+,%fp0		# X-Y1
-	fsub.s		(%a1),%fp0		# FP0 IS R = (X-Y1)-Y2
-
-SCCONT:
-#--continuation point from REDUCEX
-
-	mov.l		INT(%a6),%d1
-	ror.l		&1,%d1
-	cmp.l		%d1,&0			# D0 < 0 IFF N IS ODD
-	bge.w		NEVEN
-
-SNODD:
-#--REGISTERS SAVED SO FAR: D0, A0, FP2.
-	fmovm.x		&0x04,-(%sp)		# save fp2
-
-	fmov.x		%fp0,RPRIME(%a6)
-	fmul.x		%fp0,%fp0		# FP0 IS S = R*R
-	fmov.d		SINA7(%pc),%fp1		# A7
-	fmov.d		COSB8(%pc),%fp2		# B8
-	fmul.x		%fp0,%fp1		# SA7
-	fmul.x		%fp0,%fp2		# SB8
-
-	mov.l		%d2,-(%sp)
-	mov.l		%d1,%d2
-	ror.l		&1,%d2
-	and.l		&0x80000000,%d2
-	eor.l		%d1,%d2
-	and.l		&0x80000000,%d2
-
-	fadd.d		SINA6(%pc),%fp1		# A6+SA7
-	fadd.d		COSB7(%pc),%fp2		# B7+SB8
-
-	fmul.x		%fp0,%fp1		# S(A6+SA7)
-	eor.l		%d2,RPRIME(%a6)
-	mov.l		(%sp)+,%d2
-	fmul.x		%fp0,%fp2		# S(B7+SB8)
-	ror.l		&1,%d1
-	and.l		&0x80000000,%d1
-	mov.l		&0x3F800000,POSNEG1(%a6)
-	eor.l		%d1,POSNEG1(%a6)
-
-	fadd.d		SINA5(%pc),%fp1		# A5+S(A6+SA7)
-	fadd.d		COSB6(%pc),%fp2		# B6+S(B7+SB8)
-
-	fmul.x		%fp0,%fp1		# S(A5+S(A6+SA7))
-	fmul.x		%fp0,%fp2		# S(B6+S(B7+SB8))
-	fmov.x		%fp0,SPRIME(%a6)
-
-	fadd.d		SINA4(%pc),%fp1		# A4+S(A5+S(A6+SA7))
-	eor.l		%d1,SPRIME(%a6)
-	fadd.d		COSB5(%pc),%fp2		# B5+S(B6+S(B7+SB8))
-
-	fmul.x		%fp0,%fp1		# S(A4+...)
-	fmul.x		%fp0,%fp2		# S(B5+...)
-
-	fadd.d		SINA3(%pc),%fp1		# A3+S(A4+...)
-	fadd.d		COSB4(%pc),%fp2		# B4+S(B5+...)
-
-	fmul.x		%fp0,%fp1		# S(A3+...)
-	fmul.x		%fp0,%fp2		# S(B4+...)
-
-	fadd.x		SINA2(%pc),%fp1		# A2+S(A3+...)
-	fadd.x		COSB3(%pc),%fp2		# B3+S(B4+...)
-
-	fmul.x		%fp0,%fp1		# S(A2+...)
-	fmul.x		%fp0,%fp2		# S(B3+...)
-
-	fadd.x		SINA1(%pc),%fp1		# A1+S(A2+...)
-	fadd.x		COSB2(%pc),%fp2		# B2+S(B3+...)
-
-	fmul.x		%fp0,%fp1		# S(A1+...)
-	fmul.x		%fp2,%fp0		# S(B2+...)
-
-	fmul.x		RPRIME(%a6),%fp1	# R'S(A1+...)
-	fadd.s		COSB1(%pc),%fp0		# B1+S(B2...)
-	fmul.x		SPRIME(%a6),%fp0	# S'(B1+S(B2+...))
-
-	fmovm.x		(%sp)+,&0x20		# restore fp2
-
-	fmov.l		%d0,%fpcr
-	fadd.x		RPRIME(%a6),%fp1	# COS(X)
-	bsr		sto_cos			# store cosine result
-	fadd.s		POSNEG1(%a6),%fp0	# SIN(X)
-	bra		t_inx2
-
-NEVEN:
-#--REGISTERS SAVED SO FAR: FP2.
-	fmovm.x		&0x04,-(%sp)		# save fp2
-
-	fmov.x		%fp0,RPRIME(%a6)
-	fmul.x		%fp0,%fp0		# FP0 IS S = R*R
-
-	fmov.d		COSB8(%pc),%fp1		# B8
-	fmov.d		SINA7(%pc),%fp2		# A7
-
-	fmul.x		%fp0,%fp1		# SB8
-	fmov.x		%fp0,SPRIME(%a6)
-	fmul.x		%fp0,%fp2		# SA7
-
-	ror.l		&1,%d1
-	and.l		&0x80000000,%d1
-
-	fadd.d		COSB7(%pc),%fp1		# B7+SB8
-	fadd.d		SINA6(%pc),%fp2		# A6+SA7
-
-	eor.l		%d1,RPRIME(%a6)
-	eor.l		%d1,SPRIME(%a6)
-
-	fmul.x		%fp0,%fp1		# S(B7+SB8)
-
-	or.l		&0x3F800000,%d1
-	mov.l		%d1,POSNEG1(%a6)
-
-	fmul.x		%fp0,%fp2		# S(A6+SA7)
-
-	fadd.d		COSB6(%pc),%fp1		# B6+S(B7+SB8)
-	fadd.d		SINA5(%pc),%fp2		# A5+S(A6+SA7)
-
-	fmul.x		%fp0,%fp1		# S(B6+S(B7+SB8))
-	fmul.x		%fp0,%fp2		# S(A5+S(A6+SA7))
-
-	fadd.d		COSB5(%pc),%fp1		# B5+S(B6+S(B7+SB8))
-	fadd.d		SINA4(%pc),%fp2		# A4+S(A5+S(A6+SA7))
-
-	fmul.x		%fp0,%fp1		# S(B5+...)
-	fmul.x		%fp0,%fp2		# S(A4+...)
-
-	fadd.d		COSB4(%pc),%fp1		# B4+S(B5+...)
-	fadd.d		SINA3(%pc),%fp2		# A3+S(A4+...)
-
-	fmul.x		%fp0,%fp1		# S(B4+...)
-	fmul.x		%fp0,%fp2		# S(A3+...)
-
-	fadd.x		COSB3(%pc),%fp1		# B3+S(B4+...)
-	fadd.x		SINA2(%pc),%fp2		# A2+S(A3+...)
-
-	fmul.x		%fp0,%fp1		# S(B3+...)
-	fmul.x		%fp0,%fp2		# S(A2+...)
-
-	fadd.x		COSB2(%pc),%fp1		# B2+S(B3+...)
-	fadd.x		SINA1(%pc),%fp2		# A1+S(A2+...)
-
-	fmul.x		%fp0,%fp1		# S(B2+...)
-	fmul.x		%fp2,%fp0		# s(a1+...)
-
-
-	fadd.s		COSB1(%pc),%fp1		# B1+S(B2...)
-	fmul.x		RPRIME(%a6),%fp0	# R'S(A1+...)
-	fmul.x		SPRIME(%a6),%fp1	# S'(B1+S(B2+...))
-
-	fmovm.x		(%sp)+,&0x20		# restore fp2
-
-	fmov.l		%d0,%fpcr
-	fadd.s		POSNEG1(%a6),%fp1	# COS(X)
-	bsr		sto_cos			# store cosine result
-	fadd.x		RPRIME(%a6),%fp0	# SIN(X)
-	bra		t_inx2
-
-################################################
-
-SCBORS:
-	cmp.l		%d1,&0x3FFF8000
-	bgt.w		SREDUCEX
-
-################################################
-
-SCSM:
-#	mov.w		&0x0000,XDCARE(%a6)
-	fmov.s		&0x3F800000,%fp1
-
-	fmov.l		%d0,%fpcr
-	fsub.s		&0x00800000,%fp1
-	bsr		sto_cos			# store cosine result
-	fmov.l		%fpcr,%d0		# d0 must have fpcr,too
-	mov.b		&FMOV_OP,%d1		# last inst is MOVE
-	fmov.x		X(%a6),%fp0
-	bra		t_catch
-
-##############################################
-
-	global		ssincosd
-#--SIN AND COS OF X FOR DENORMALIZED X
-ssincosd:
-	mov.l		%d0,-(%sp)		# save d0
-	fmov.s		&0x3F800000,%fp1
-	bsr		sto_cos			# store cosine result
-	mov.l		(%sp)+,%d0		# restore d0
-	bra		t_extdnrm
-
-############################################
-
-#--WHEN REDUCEX IS USED, THE CODE WILL INEVITABLY BE SLOW.
-#--THIS REDUCTION METHOD, HOWEVER, IS MUCH FASTER THAN USING
-#--THE REMAINDER INSTRUCTION WHICH IS NOW IN SOFTWARE.
-SREDUCEX:
-	fmovm.x		&0x3c,-(%sp)		# save {fp2-fp5}
-	mov.l		%d2,-(%sp)		# save d2
-	fmov.s		&0x00000000,%fp1	# fp1 = 0
-
-#--If compact form of abs(arg) in d0=$7ffeffff, argument is so large that
-#--there is a danger of unwanted overflow in first LOOP iteration.  In this
-#--case, reduce argument by one remainder step to make subsequent reduction
-#--safe.
-	cmp.l		%d1,&0x7ffeffff		# is arg dangerously large?
-	bne.b		SLOOP			# no
-
-# yes; create 2**16383*PI/2
-	mov.w		&0x7ffe,FP_SCR0_EX(%a6)
-	mov.l		&0xc90fdaa2,FP_SCR0_HI(%a6)
-	clr.l		FP_SCR0_LO(%a6)
-
-# create low half of 2**16383*PI/2 at FP_SCR1
-	mov.w		&0x7fdc,FP_SCR1_EX(%a6)
-	mov.l		&0x85a308d3,FP_SCR1_HI(%a6)
-	clr.l		FP_SCR1_LO(%a6)
-
-	ftest.x		%fp0			# test sign of argument
-	fblt.w		sred_neg
-
-	or.b		&0x80,FP_SCR0_EX(%a6)	# positive arg
-	or.b		&0x80,FP_SCR1_EX(%a6)
-sred_neg:
-	fadd.x		FP_SCR0(%a6),%fp0	# high part of reduction is exact
-	fmov.x		%fp0,%fp1		# save high result in fp1
-	fadd.x		FP_SCR1(%a6),%fp0	# low part of reduction
-	fsub.x		%fp0,%fp1		# determine low component of result
-	fadd.x		FP_SCR1(%a6),%fp1	# fp0/fp1 are reduced argument.
-
-#--ON ENTRY, FP0 IS X, ON RETURN, FP0 IS X REM PI/2, |X| <= PI/4.
-#--integer quotient will be stored in N
-#--Intermeditate remainder is 66-bit long; (R,r) in (FP0,FP1)
-SLOOP:
-	fmov.x		%fp0,INARG(%a6)		# +-2**K * F, 1 <= F < 2
-	mov.w		INARG(%a6),%d1
-	mov.l		%d1,%a1			# save a copy of D0
-	and.l		&0x00007FFF,%d1
-	sub.l		&0x00003FFF,%d1		# d0 = K
-	cmp.l		%d1,&28
-	ble.b		SLASTLOOP
-SCONTLOOP:
-	sub.l		&27,%d1			# d0 = L := K-27
-	mov.b		&0,ENDFLAG(%a6)
-	bra.b		SWORK
-SLASTLOOP:
-	clr.l		%d1			# d0 = L := 0
-	mov.b		&1,ENDFLAG(%a6)
-
-SWORK:
-#--FIND THE REMAINDER OF (R,r) W.R.T.	2**L * (PI/2). L IS SO CHOSEN
-#--THAT	INT( X * (2/PI) / 2**(L) ) < 2**29.
-
-#--CREATE 2**(-L) * (2/PI), SIGN(INARG)*2**(63),
-#--2**L * (PIby2_1), 2**L * (PIby2_2)
-
-	mov.l		&0x00003FFE,%d2		# BIASED EXP OF 2/PI
-	sub.l		%d1,%d2			# BIASED EXP OF 2**(-L)*(2/PI)
-
-	mov.l		&0xA2F9836E,FP_SCR0_HI(%a6)
-	mov.l		&0x4E44152A,FP_SCR0_LO(%a6)
-	mov.w		%d2,FP_SCR0_EX(%a6)	# FP_SCR0 = 2**(-L)*(2/PI)
-
-	fmov.x		%fp0,%fp2
-	fmul.x		FP_SCR0(%a6),%fp2	# fp2 = X * 2**(-L)*(2/PI)
-
-#--WE MUST NOW FIND INT(FP2). SINCE WE NEED THIS VALUE IN
-#--FLOATING POINT FORMAT, THE TWO FMOVE'S	FMOVE.L FP <--> N
-#--WILL BE TOO INEFFICIENT. THE WAY AROUND IT IS THAT
-#--(SIGN(INARG)*2**63	+	FP2) - SIGN(INARG)*2**63 WILL GIVE
-#--US THE DESIRED VALUE IN FLOATING POINT.
-	mov.l		%a1,%d2
-	swap		%d2
-	and.l		&0x80000000,%d2
-	or.l		&0x5F000000,%d2		# d2 = SIGN(INARG)*2**63 IN SGL
-	mov.l		%d2,TWOTO63(%a6)
-	fadd.s		TWOTO63(%a6),%fp2	# THE FRACTIONAL PART OF FP1 IS ROUNDED
-	fsub.s		TWOTO63(%a6),%fp2	# fp2 = N
-#	fint.x		%fp2
-
-#--CREATING 2**(L)*Piby2_1 and 2**(L)*Piby2_2
-	mov.l		%d1,%d2			# d2 = L
-
-	add.l		&0x00003FFF,%d2		# BIASED EXP OF 2**L * (PI/2)
-	mov.w		%d2,FP_SCR0_EX(%a6)
-	mov.l		&0xC90FDAA2,FP_SCR0_HI(%a6)
-	clr.l		FP_SCR0_LO(%a6)		# FP_SCR0 = 2**(L) * Piby2_1
-
-	add.l		&0x00003FDD,%d1
-	mov.w		%d1,FP_SCR1_EX(%a6)
-	mov.l		&0x85A308D3,FP_SCR1_HI(%a6)
-	clr.l		FP_SCR1_LO(%a6)		# FP_SCR1 = 2**(L) * Piby2_2
-
-	mov.b		ENDFLAG(%a6),%d1
-
-#--We are now ready to perform (R+r) - N*P1 - N*P2, P1 = 2**(L) * Piby2_1 and
-#--P2 = 2**(L) * Piby2_2
-	fmov.x		%fp2,%fp4		# fp4 = N
-	fmul.x		FP_SCR0(%a6),%fp4	# fp4 = W = N*P1
-	fmov.x		%fp2,%fp5		# fp5 = N
-	fmul.x		FP_SCR1(%a6),%fp5	# fp5 = w = N*P2
-	fmov.x		%fp4,%fp3		# fp3 = W = N*P1
-
-#--we want P+p = W+w  but  |p| <= half ulp of P
-#--Then, we need to compute  A := R-P   and  a := r-p
-	fadd.x		%fp5,%fp3		# fp3 = P
-	fsub.x		%fp3,%fp4		# fp4 = W-P
-
-	fsub.x		%fp3,%fp0		# fp0 = A := R - P
-	fadd.x		%fp5,%fp4		# fp4 = p = (W-P)+w
-
-	fmov.x		%fp0,%fp3		# fp3 = A
-	fsub.x		%fp4,%fp1		# fp1 = a := r - p
-
-#--Now we need to normalize (A,a) to  "new (R,r)" where R+r = A+a but
-#--|r| <= half ulp of R.
-	fadd.x		%fp1,%fp0		# fp0 = R := A+a
-#--No need to calculate r if this is the last loop
-	cmp.b		%d1,&0
-	bgt.w		SRESTORE
-
-#--Need to calculate r
-	fsub.x		%fp0,%fp3		# fp3 = A-R
-	fadd.x		%fp3,%fp1		# fp1 = r := (A-R)+a
-	bra.w		SLOOP
-
-SRESTORE:
-	fmov.l		%fp2,INT(%a6)
-	mov.l		(%sp)+,%d2		# restore d2
-	fmovm.x		(%sp)+,&0x3c		# restore {fp2-fp5}
-
-	mov.l		ADJN(%a6),%d1
-	cmp.l		%d1,&4
-
-	blt.w		SINCONT
-	bra.w		SCCONT
-
-#########################################################################
-# stan():  computes the tangent of a normalized input			#
-# stand(): computes the tangent of a denormalized input			#
-#									#
-# INPUT *************************************************************** #
-#	a0 = pointer to extended precision input			#
-#	d0 = round precision,mode					#
-#									#
-# OUTPUT ************************************************************** #
-#	fp0 = tan(X)							#
-#									#
-# ACCURACY and MONOTONICITY ******************************************* #
-#	The returned result is within 3 ulp in 64 significant bit, i.e. #
-#	within 0.5001 ulp to 53 bits if the result is subsequently	#
-#	rounded to double precision. The result is provably monotonic	#
-#	in double precision.						#
-#									#
-# ALGORITHM *********************************************************** #
-#									#
-#	1. If |X| >= 15Pi or |X| < 2**(-40), go to 6.			#
-#									#
-#	2. Decompose X as X = N(Pi/2) + r where |r| <= Pi/4. Let	#
-#		k = N mod 2, so in particular, k = 0 or 1.		#
-#									#
-#	3. If k is odd, go to 5.					#
-#									#
-#	4. (k is even) Tan(X) = tan(r) and tan(r) is approximated by a	#
-#		rational function U/V where				#
-#		U = r + r*s*(P1 + s*(P2 + s*P3)), and			#
-#		V = 1 + s*(Q1 + s*(Q2 + s*(Q3 + s*Q4))),  s = r*r.	#
-#		Exit.							#
-#									#
-#	4. (k is odd) Tan(X) = -cot(r). Since tan(r) is approximated by #
-#		a rational function U/V where				#
-#		U = r + r*s*(P1 + s*(P2 + s*P3)), and			#
-#		V = 1 + s*(Q1 + s*(Q2 + s*(Q3 + s*Q4))), s = r*r,	#
-#		-Cot(r) = -V/U. Exit.					#
-#									#
-#	6. If |X| > 1, go to 8.						#
-#									#
-#	7. (|X|<2**(-40)) Tan(X) = X. Exit.				#
-#									#
-#	8. Overwrite X by X := X rem 2Pi. Now that |X| <= Pi, go back	#
-#		to 2.							#
-#									#
-#########################################################################
-
-TANQ4:
-	long		0x3EA0B759,0xF50F8688
-TANP3:
-	long		0xBEF2BAA5,0xA8924F04
-
-TANQ3:
-	long		0xBF346F59,0xB39BA65F,0x00000000,0x00000000
-
-TANP2:
-	long		0x3FF60000,0xE073D3FC,0x199C4A00,0x00000000
-
-TANQ2:
-	long		0x3FF90000,0xD23CD684,0x15D95FA1,0x00000000
-
-TANP1:
-	long		0xBFFC0000,0x8895A6C5,0xFB423BCA,0x00000000
-
-TANQ1:
-	long		0xBFFD0000,0xEEF57E0D,0xA84BC8CE,0x00000000
-
-INVTWOPI:
-	long		0x3FFC0000,0xA2F9836E,0x4E44152A,0x00000000
-
-TWOPI1:
-	long		0x40010000,0xC90FDAA2,0x00000000,0x00000000
-TWOPI2:
-	long		0x3FDF0000,0x85A308D4,0x00000000,0x00000000
-
-#--N*PI/2, -32 <= N <= 32, IN A LEADING TERM IN EXT. AND TRAILING
-#--TERM IN SGL. NOTE THAT PI IS 64-BIT LONG, THUS N*PI/2 IS AT
-#--MOST 69 BITS LONG.
-#	global		PITBL
-PITBL:
-	long		0xC0040000,0xC90FDAA2,0x2168C235,0x21800000
-	long		0xC0040000,0xC2C75BCD,0x105D7C23,0xA0D00000
-	long		0xC0040000,0xBC7EDCF7,0xFF523611,0xA1E80000
-	long		0xC0040000,0xB6365E22,0xEE46F000,0x21480000
-	long		0xC0040000,0xAFEDDF4D,0xDD3BA9EE,0xA1200000
-	long		0xC0040000,0xA9A56078,0xCC3063DD,0x21FC0000
-	long		0xC0040000,0xA35CE1A3,0xBB251DCB,0x21100000
-	long		0xC0040000,0x9D1462CE,0xAA19D7B9,0xA1580000
-	long		0xC0040000,0x96CBE3F9,0x990E91A8,0x21E00000
-	long		0xC0040000,0x90836524,0x88034B96,0x20B00000
-	long		0xC0040000,0x8A3AE64F,0x76F80584,0xA1880000
-	long		0xC0040000,0x83F2677A,0x65ECBF73,0x21C40000
-	long		0xC0030000,0xFB53D14A,0xA9C2F2C2,0x20000000
-	long		0xC0030000,0xEEC2D3A0,0x87AC669F,0x21380000
-	long		0xC0030000,0xE231D5F6,0x6595DA7B,0xA1300000
-	long		0xC0030000,0xD5A0D84C,0x437F4E58,0x9FC00000
-	long		0xC0030000,0xC90FDAA2,0x2168C235,0x21000000
-	long		0xC0030000,0xBC7EDCF7,0xFF523611,0xA1680000
-	long		0xC0030000,0xAFEDDF4D,0xDD3BA9EE,0xA0A00000
-	long		0xC0030000,0xA35CE1A3,0xBB251DCB,0x20900000
-	long		0xC0030000,0x96CBE3F9,0x990E91A8,0x21600000
-	long		0xC0030000,0x8A3AE64F,0x76F80584,0xA1080000
-	long		0xC0020000,0xFB53D14A,0xA9C2F2C2,0x1F800000
-	long		0xC0020000,0xE231D5F6,0x6595DA7B,0xA0B00000
-	long		0xC0020000,0xC90FDAA2,0x2168C235,0x20800000
-	long		0xC0020000,0xAFEDDF4D,0xDD3BA9EE,0xA0200000
-	long		0xC0020000,0x96CBE3F9,0x990E91A8,0x20E00000
-	long		0xC0010000,0xFB53D14A,0xA9C2F2C2,0x1F000000
-	long		0xC0010000,0xC90FDAA2,0x2168C235,0x20000000
-	long		0xC0010000,0x96CBE3F9,0x990E91A8,0x20600000
-	long		0xC0000000,0xC90FDAA2,0x2168C235,0x1F800000
-	long		0xBFFF0000,0xC90FDAA2,0x2168C235,0x1F000000
-	long		0x00000000,0x00000000,0x00000000,0x00000000
-	long		0x3FFF0000,0xC90FDAA2,0x2168C235,0x9F000000
-	long		0x40000000,0xC90FDAA2,0x2168C235,0x9F800000
-	long		0x40010000,0x96CBE3F9,0x990E91A8,0xA0600000
-	long		0x40010000,0xC90FDAA2,0x2168C235,0xA0000000
-	long		0x40010000,0xFB53D14A,0xA9C2F2C2,0x9F000000
-	long		0x40020000,0x96CBE3F9,0x990E91A8,0xA0E00000
-	long		0x40020000,0xAFEDDF4D,0xDD3BA9EE,0x20200000
-	long		0x40020000,0xC90FDAA2,0x2168C235,0xA0800000
-	long		0x40020000,0xE231D5F6,0x6595DA7B,0x20B00000
-	long		0x40020000,0xFB53D14A,0xA9C2F2C2,0x9F800000
-	long		0x40030000,0x8A3AE64F,0x76F80584,0x21080000
-	long		0x40030000,0x96CBE3F9,0x990E91A8,0xA1600000
-	long		0x40030000,0xA35CE1A3,0xBB251DCB,0xA0900000
-	long		0x40030000,0xAFEDDF4D,0xDD3BA9EE,0x20A00000
-	long		0x40030000,0xBC7EDCF7,0xFF523611,0x21680000
-	long		0x40030000,0xC90FDAA2,0x2168C235,0xA1000000
-	long		0x40030000,0xD5A0D84C,0x437F4E58,0x1FC00000
-	long		0x40030000,0xE231D5F6,0x6595DA7B,0x21300000
-	long		0x40030000,0xEEC2D3A0,0x87AC669F,0xA1380000
-	long		0x40030000,0xFB53D14A,0xA9C2F2C2,0xA0000000
-	long		0x40040000,0x83F2677A,0x65ECBF73,0xA1C40000
-	long		0x40040000,0x8A3AE64F,0x76F80584,0x21880000
-	long		0x40040000,0x90836524,0x88034B96,0xA0B00000
-	long		0x40040000,0x96CBE3F9,0x990E91A8,0xA1E00000
-	long		0x40040000,0x9D1462CE,0xAA19D7B9,0x21580000
-	long		0x40040000,0xA35CE1A3,0xBB251DCB,0xA1100000
-	long		0x40040000,0xA9A56078,0xCC3063DD,0xA1FC0000
-	long		0x40040000,0xAFEDDF4D,0xDD3BA9EE,0x21200000
-	long		0x40040000,0xB6365E22,0xEE46F000,0xA1480000
-	long		0x40040000,0xBC7EDCF7,0xFF523611,0x21E80000
-	long		0x40040000,0xC2C75BCD,0x105D7C23,0x20D00000
-	long		0x40040000,0xC90FDAA2,0x2168C235,0xA1800000
-
-	set		INARG,FP_SCR0
-
-	set		TWOTO63,L_SCR1
-	set		INT,L_SCR1
-	set		ENDFLAG,L_SCR2
-
-	global		stan
-stan:
-	fmov.x		(%a0),%fp0		# LOAD INPUT
-
-	mov.l		(%a0),%d1
-	mov.w		4(%a0),%d1
-	and.l		&0x7FFFFFFF,%d1
-
-	cmp.l		%d1,&0x3FD78000		# |X| >= 2**(-40)?
-	bge.b		TANOK1
-	bra.w		TANSM
-TANOK1:
-	cmp.l		%d1,&0x4004BC7E		# |X| < 15 PI?
-	blt.b		TANMAIN
-	bra.w		REDUCEX
-
-TANMAIN:
-#--THIS IS THE USUAL CASE, |X| <= 15 PI.
-#--THE ARGUMENT REDUCTION IS DONE BY TABLE LOOK UP.
-	fmov.x		%fp0,%fp1
-	fmul.d		TWOBYPI(%pc),%fp1	# X*2/PI
-
-	lea.l		PITBL+0x200(%pc),%a1	# TABLE OF N*PI/2, N = -32,...,32
-
-	fmov.l		%fp1,%d1		# CONVERT TO INTEGER
-
-	asl.l		&4,%d1
-	add.l		%d1,%a1			# ADDRESS N*PIBY2 IN Y1, Y2
-
-	fsub.x		(%a1)+,%fp0		# X-Y1
-
-	fsub.s		(%a1),%fp0		# FP0 IS R = (X-Y1)-Y2
-
-	ror.l		&5,%d1
-	and.l		&0x80000000,%d1		# D0 WAS ODD IFF D0 < 0
-
-TANCONT:
-	fmovm.x		&0x0c,-(%sp)		# save fp2,fp3
-
-	cmp.l		%d1,&0
-	blt.w		NODD
-
-	fmov.x		%fp0,%fp1
-	fmul.x		%fp1,%fp1		# S = R*R
-
-	fmov.d		TANQ4(%pc),%fp3
-	fmov.d		TANP3(%pc),%fp2
-
-	fmul.x		%fp1,%fp3		# SQ4
-	fmul.x		%fp1,%fp2		# SP3
-
-	fadd.d		TANQ3(%pc),%fp3		# Q3+SQ4
-	fadd.x		TANP2(%pc),%fp2		# P2+SP3
-
-	fmul.x		%fp1,%fp3		# S(Q3+SQ4)
-	fmul.x		%fp1,%fp2		# S(P2+SP3)
-
-	fadd.x		TANQ2(%pc),%fp3		# Q2+S(Q3+SQ4)
-	fadd.x		TANP1(%pc),%fp2		# P1+S(P2+SP3)
-
-	fmul.x		%fp1,%fp3		# S(Q2+S(Q3+SQ4))
-	fmul.x		%fp1,%fp2		# S(P1+S(P2+SP3))
-
-	fadd.x		TANQ1(%pc),%fp3		# Q1+S(Q2+S(Q3+SQ4))
-	fmul.x		%fp0,%fp2		# RS(P1+S(P2+SP3))
-
-	fmul.x		%fp3,%fp1		# S(Q1+S(Q2+S(Q3+SQ4)))
-
-	fadd.x		%fp2,%fp0		# R+RS(P1+S(P2+SP3))
-
-	fadd.s		&0x3F800000,%fp1	# 1+S(Q1+...)
-
-	fmovm.x		(%sp)+,&0x30		# restore fp2,fp3
-
-	fmov.l		%d0,%fpcr		# restore users round mode,prec
-	fdiv.x		%fp1,%fp0		# last inst - possible exception set
-	bra		t_inx2
-
-NODD:
-	fmov.x		%fp0,%fp1
-	fmul.x		%fp0,%fp0		# S = R*R
-
-	fmov.d		TANQ4(%pc),%fp3
-	fmov.d		TANP3(%pc),%fp2
-
-	fmul.x		%fp0,%fp3		# SQ4
-	fmul.x		%fp0,%fp2		# SP3
-
-	fadd.d		TANQ3(%pc),%fp3		# Q3+SQ4
-	fadd.x		TANP2(%pc),%fp2		# P2+SP3
-
-	fmul.x		%fp0,%fp3		# S(Q3+SQ4)
-	fmul.x		%fp0,%fp2		# S(P2+SP3)
-
-	fadd.x		TANQ2(%pc),%fp3		# Q2+S(Q3+SQ4)
-	fadd.x		TANP1(%pc),%fp2		# P1+S(P2+SP3)
-
-	fmul.x		%fp0,%fp3		# S(Q2+S(Q3+SQ4))
-	fmul.x		%fp0,%fp2		# S(P1+S(P2+SP3))
-
-	fadd.x		TANQ1(%pc),%fp3		# Q1+S(Q2+S(Q3+SQ4))
-	fmul.x		%fp1,%fp2		# RS(P1+S(P2+SP3))
-
-	fmul.x		%fp3,%fp0		# S(Q1+S(Q2+S(Q3+SQ4)))
-
-	fadd.x		%fp2,%fp1		# R+RS(P1+S(P2+SP3))
-	fadd.s		&0x3F800000,%fp0	# 1+S(Q1+...)
-
-	fmovm.x		(%sp)+,&0x30		# restore fp2,fp3
-
-	fmov.x		%fp1,-(%sp)
-	eor.l		&0x80000000,(%sp)
-
-	fmov.l		%d0,%fpcr		# restore users round mode,prec
-	fdiv.x		(%sp)+,%fp0		# last inst - possible exception set
-	bra		t_inx2
-
-TANBORS:
-#--IF |X| > 15PI, WE USE THE GENERAL ARGUMENT REDUCTION.
-#--IF |X| < 2**(-40), RETURN X OR 1.
-	cmp.l		%d1,&0x3FFF8000
-	bgt.b		REDUCEX
-
-TANSM:
-	fmov.x		%fp0,-(%sp)
-	fmov.l		%d0,%fpcr		# restore users round mode,prec
-	mov.b		&FMOV_OP,%d1		# last inst is MOVE
-	fmov.x		(%sp)+,%fp0		# last inst - posibble exception set
-	bra		t_catch
-
-	global		stand
-#--TAN(X) = X FOR DENORMALIZED X
-stand:
-	bra		t_extdnrm
-
-#--WHEN REDUCEX IS USED, THE CODE WILL INEVITABLY BE SLOW.
-#--THIS REDUCTION METHOD, HOWEVER, IS MUCH FASTER THAN USING
-#--THE REMAINDER INSTRUCTION WHICH IS NOW IN SOFTWARE.
-REDUCEX:
-	fmovm.x		&0x3c,-(%sp)		# save {fp2-fp5}
-	mov.l		%d2,-(%sp)		# save d2
-	fmov.s		&0x00000000,%fp1	# fp1 = 0
-
-#--If compact form of abs(arg) in d0=$7ffeffff, argument is so large that
-#--there is a danger of unwanted overflow in first LOOP iteration.  In this
-#--case, reduce argument by one remainder step to make subsequent reduction
-#--safe.
-	cmp.l		%d1,&0x7ffeffff		# is arg dangerously large?
-	bne.b		LOOP			# no
-
-# yes; create 2**16383*PI/2
-	mov.w		&0x7ffe,FP_SCR0_EX(%a6)
-	mov.l		&0xc90fdaa2,FP_SCR0_HI(%a6)
-	clr.l		FP_SCR0_LO(%a6)
-
-# create low half of 2**16383*PI/2 at FP_SCR1
-	mov.w		&0x7fdc,FP_SCR1_EX(%a6)
-	mov.l		&0x85a308d3,FP_SCR1_HI(%a6)
-	clr.l		FP_SCR1_LO(%a6)
-
-	ftest.x		%fp0			# test sign of argument
-	fblt.w		red_neg
-
-	or.b		&0x80,FP_SCR0_EX(%a6)	# positive arg
-	or.b		&0x80,FP_SCR1_EX(%a6)
-red_neg:
-	fadd.x		FP_SCR0(%a6),%fp0	# high part of reduction is exact
-	fmov.x		%fp0,%fp1		# save high result in fp1
-	fadd.x		FP_SCR1(%a6),%fp0	# low part of reduction
-	fsub.x		%fp0,%fp1		# determine low component of result
-	fadd.x		FP_SCR1(%a6),%fp1	# fp0/fp1 are reduced argument.
-
-#--ON ENTRY, FP0 IS X, ON RETURN, FP0 IS X REM PI/2, |X| <= PI/4.
-#--integer quotient will be stored in N
-#--Intermeditate remainder is 66-bit long; (R,r) in (FP0,FP1)
-LOOP:
-	fmov.x		%fp0,INARG(%a6)		# +-2**K * F, 1 <= F < 2
-	mov.w		INARG(%a6),%d1
-	mov.l		%d1,%a1			# save a copy of D0
-	and.l		&0x00007FFF,%d1
-	sub.l		&0x00003FFF,%d1		# d0 = K
-	cmp.l		%d1,&28
-	ble.b		LASTLOOP
-CONTLOOP:
-	sub.l		&27,%d1			# d0 = L := K-27
-	mov.b		&0,ENDFLAG(%a6)
-	bra.b		WORK
-LASTLOOP:
-	clr.l		%d1			# d0 = L := 0
-	mov.b		&1,ENDFLAG(%a6)
-
-WORK:
-#--FIND THE REMAINDER OF (R,r) W.R.T.	2**L * (PI/2). L IS SO CHOSEN
-#--THAT	INT( X * (2/PI) / 2**(L) ) < 2**29.
-
-#--CREATE 2**(-L) * (2/PI), SIGN(INARG)*2**(63),
-#--2**L * (PIby2_1), 2**L * (PIby2_2)
-
-	mov.l		&0x00003FFE,%d2		# BIASED EXP OF 2/PI
-	sub.l		%d1,%d2			# BIASED EXP OF 2**(-L)*(2/PI)
-
-	mov.l		&0xA2F9836E,FP_SCR0_HI(%a6)
-	mov.l		&0x4E44152A,FP_SCR0_LO(%a6)
-	mov.w		%d2,FP_SCR0_EX(%a6)	# FP_SCR0 = 2**(-L)*(2/PI)
-
-	fmov.x		%fp0,%fp2
-	fmul.x		FP_SCR0(%a6),%fp2	# fp2 = X * 2**(-L)*(2/PI)
-
-#--WE MUST NOW FIND INT(FP2). SINCE WE NEED THIS VALUE IN
-#--FLOATING POINT FORMAT, THE TWO FMOVE'S	FMOVE.L FP <--> N
-#--WILL BE TOO INEFFICIENT. THE WAY AROUND IT IS THAT
-#--(SIGN(INARG)*2**63	+	FP2) - SIGN(INARG)*2**63 WILL GIVE
-#--US THE DESIRED VALUE IN FLOATING POINT.
-	mov.l		%a1,%d2
-	swap		%d2
-	and.l		&0x80000000,%d2
-	or.l		&0x5F000000,%d2		# d2 = SIGN(INARG)*2**63 IN SGL
-	mov.l		%d2,TWOTO63(%a6)
-	fadd.s		TWOTO63(%a6),%fp2	# THE FRACTIONAL PART OF FP1 IS ROUNDED
-	fsub.s		TWOTO63(%a6),%fp2	# fp2 = N
-#	fintrz.x	%fp2,%fp2
-
-#--CREATING 2**(L)*Piby2_1 and 2**(L)*Piby2_2
-	mov.l		%d1,%d2			# d2 = L
-
-	add.l		&0x00003FFF,%d2		# BIASED EXP OF 2**L * (PI/2)
-	mov.w		%d2,FP_SCR0_EX(%a6)
-	mov.l		&0xC90FDAA2,FP_SCR0_HI(%a6)
-	clr.l		FP_SCR0_LO(%a6)		# FP_SCR0 = 2**(L) * Piby2_1
-
-	add.l		&0x00003FDD,%d1
-	mov.w		%d1,FP_SCR1_EX(%a6)
-	mov.l		&0x85A308D3,FP_SCR1_HI(%a6)
-	clr.l		FP_SCR1_LO(%a6)		# FP_SCR1 = 2**(L) * Piby2_2
-
-	mov.b		ENDFLAG(%a6),%d1
-
-#--We are now ready to perform (R+r) - N*P1 - N*P2, P1 = 2**(L) * Piby2_1 and
-#--P2 = 2**(L) * Piby2_2
-	fmov.x		%fp2,%fp4		# fp4 = N
-	fmul.x		FP_SCR0(%a6),%fp4	# fp4 = W = N*P1
-	fmov.x		%fp2,%fp5		# fp5 = N
-	fmul.x		FP_SCR1(%a6),%fp5	# fp5 = w = N*P2
-	fmov.x		%fp4,%fp3		# fp3 = W = N*P1
-
-#--we want P+p = W+w  but  |p| <= half ulp of P
-#--Then, we need to compute  A := R-P   and  a := r-p
-	fadd.x		%fp5,%fp3		# fp3 = P
-	fsub.x		%fp3,%fp4		# fp4 = W-P
-
-	fsub.x		%fp3,%fp0		# fp0 = A := R - P
-	fadd.x		%fp5,%fp4		# fp4 = p = (W-P)+w
-
-	fmov.x		%fp0,%fp3		# fp3 = A
-	fsub.x		%fp4,%fp1		# fp1 = a := r - p
-
-#--Now we need to normalize (A,a) to  "new (R,r)" where R+r = A+a but
-#--|r| <= half ulp of R.
-	fadd.x		%fp1,%fp0		# fp0 = R := A+a
-#--No need to calculate r if this is the last loop
-	cmp.b		%d1,&0
-	bgt.w		RESTORE
-
-#--Need to calculate r
-	fsub.x		%fp0,%fp3		# fp3 = A-R
-	fadd.x		%fp3,%fp1		# fp1 = r := (A-R)+a
-	bra.w		LOOP
-
-RESTORE:
-	fmov.l		%fp2,INT(%a6)
-	mov.l		(%sp)+,%d2		# restore d2
-	fmovm.x		(%sp)+,&0x3c		# restore {fp2-fp5}
-
-	mov.l		INT(%a6),%d1
-	ror.l		&1,%d1
-
-	bra.w		TANCONT
-
-#########################################################################
-# satan():  computes the arctangent of a normalized number		#
-# satand(): computes the arctangent of a denormalized number		#
-#									#
-# INPUT	*************************************************************** #
-#	a0 = pointer to extended precision input			#
-#	d0 = round precision,mode					#
-#									#
-# OUTPUT ************************************************************** #
-#	fp0 = arctan(X)							#
-#									#
-# ACCURACY and MONOTONICITY ******************************************* #
-#	The returned result is within 2 ulps in	64 significant bit,	#
-#	i.e. within 0.5001 ulp to 53 bits if the result is subsequently	#
-#	rounded to double precision. The result is provably monotonic	#
-#	in double precision.						#
-#									#
-# ALGORITHM *********************************************************** #
-#	Step 1. If |X| >= 16 or |X| < 1/16, go to Step 5.		#
-#									#
-#	Step 2. Let X = sgn * 2**k * 1.xxxxxxxx...x.			#
-#		Note that k = -4, -3,..., or 3.				#
-#		Define F = sgn * 2**k * 1.xxxx1, i.e. the first 5	#
-#		significant bits of X with a bit-1 attached at the 6-th	#
-#		bit position. Define u to be u = (X-F) / (1 + X*F).	#
-#									#
-#	Step 3. Approximate arctan(u) by a polynomial poly.		#
-#									#
-#	Step 4. Return arctan(F) + poly, arctan(F) is fetched from a	#
-#		table of values calculated beforehand. Exit.		#
-#									#
-#	Step 5. If |X| >= 16, go to Step 7.				#
-#									#
-#	Step 6. Approximate arctan(X) by an odd polynomial in X. Exit.	#
-#									#
-#	Step 7. Define X' = -1/X. Approximate arctan(X') by an odd	#
-#		polynomial in X'.					#
-#		Arctan(X) = sign(X)*Pi/2 + arctan(X'). Exit.		#
-#									#
-#########################################################################
-
-ATANA3:	long		0xBFF6687E,0x314987D8
-ATANA2:	long		0x4002AC69,0x34A26DB3
-ATANA1:	long		0xBFC2476F,0x4E1DA28E
-
-ATANB6:	long		0x3FB34444,0x7F876989
-ATANB5:	long		0xBFB744EE,0x7FAF45DB
-ATANB4:	long		0x3FBC71C6,0x46940220
-ATANB3:	long		0xBFC24924,0x921872F9
-ATANB2:	long		0x3FC99999,0x99998FA9
-ATANB1:	long		0xBFD55555,0x55555555
-
-ATANC5:	long		0xBFB70BF3,0x98539E6A
-ATANC4:	long		0x3FBC7187,0x962D1D7D
-ATANC3:	long		0xBFC24924,0x827107B8
-ATANC2:	long		0x3FC99999,0x9996263E
-ATANC1:	long		0xBFD55555,0x55555536
-
-PPIBY2:	long		0x3FFF0000,0xC90FDAA2,0x2168C235,0x00000000
-NPIBY2:	long		0xBFFF0000,0xC90FDAA2,0x2168C235,0x00000000
-
-PTINY:	long		0x00010000,0x80000000,0x00000000,0x00000000
-NTINY:	long		0x80010000,0x80000000,0x00000000,0x00000000
-
-ATANTBL:
-	long		0x3FFB0000,0x83D152C5,0x060B7A51,0x00000000
-	long		0x3FFB0000,0x8BC85445,0x65498B8B,0x00000000
-	long		0x3FFB0000,0x93BE4060,0x17626B0D,0x00000000
-	long		0x3FFB0000,0x9BB3078D,0x35AEC202,0x00000000
-	long		0x3FFB0000,0xA3A69A52,0x5DDCE7DE,0x00000000
-	long		0x3FFB0000,0xAB98E943,0x62765619,0x00000000
-	long		0x3FFB0000,0xB389E502,0xF9C59862,0x00000000
-	long		0x3FFB0000,0xBB797E43,0x6B09E6FB,0x00000000
-	long		0x3FFB0000,0xC367A5C7,0x39E5F446,0x00000000
-	long		0x3FFB0000,0xCB544C61,0xCFF7D5C6,0x00000000
-	long		0x3FFB0000,0xD33F62F8,0x2488533E,0x00000000
-	long		0x3FFB0000,0xDB28DA81,0x62404C77,0x00000000
-	long		0x3FFB0000,0xE310A407,0x8AD34F18,0x00000000
-	long		0x3FFB0000,0xEAF6B0A8,0x188EE1EB,0x00000000
-	long		0x3FFB0000,0xF2DAF194,0x9DBE79D5,0x00000000
-	long		0x3FFB0000,0xFABD5813,0x61D47E3E,0x00000000
-	long		0x3FFC0000,0x8346AC21,0x0959ECC4,0x00000000
-	long		0x3FFC0000,0x8B232A08,0x304282D8,0x00000000
-	long		0x3FFC0000,0x92FB70B8,0xD29AE2F9,0x00000000
-	long		0x3FFC0000,0x9ACF476F,0x5CCD1CB4,0x00000000
-	long		0x3FFC0000,0xA29E7630,0x4954F23F,0x00000000
-	long		0x3FFC0000,0xAA68C5D0,0x8AB85230,0x00000000
-	long		0x3FFC0000,0xB22DFFFD,0x9D539F83,0x00000000
-	long		0x3FFC0000,0xB9EDEF45,0x3E900EA5,0x00000000
-	long		0x3FFC0000,0xC1A85F1C,0xC75E3EA5,0x00000000
-	long		0x3FFC0000,0xC95D1BE8,0x28138DE6,0x00000000
-	long		0x3FFC0000,0xD10BF300,0x840D2DE4,0x00000000
-	long		0x3FFC0000,0xD8B4B2BA,0x6BC05E7A,0x00000000
-	long		0x3FFC0000,0xE0572A6B,0xB42335F6,0x00000000
-	long		0x3FFC0000,0xE7F32A70,0xEA9CAA8F,0x00000000
-	long		0x3FFC0000,0xEF888432,0x64ECEFAA,0x00000000
-	long		0x3FFC0000,0xF7170A28,0xECC06666,0x00000000
-	long		0x3FFD0000,0x812FD288,0x332DAD32,0x00000000
-	long		0x3FFD0000,0x88A8D1B1,0x218E4D64,0x00000000
-	long		0x3FFD0000,0x9012AB3F,0x23E4AEE8,0x00000000
-	long		0x3FFD0000,0x976CC3D4,0x11E7F1B9,0x00000000
-	long		0x3FFD0000,0x9EB68949,0x3889A227,0x00000000
-	long		0x3FFD0000,0xA5EF72C3,0x4487361B,0x00000000
-	long		0x3FFD0000,0xAD1700BA,0xF07A7227,0x00000000
-	long		0x3FFD0000,0xB42CBCFA,0xFD37EFB7,0x00000000
-	long		0x3FFD0000,0xBB303A94,0x0BA80F89,0x00000000
-	long		0x3FFD0000,0xC22115C6,0xFCAEBBAF,0x00000000
-	long		0x3FFD0000,0xC8FEF3E6,0x86331221,0x00000000
-	long		0x3FFD0000,0xCFC98330,0xB4000C70,0x00000000
-	long		0x3FFD0000,0xD6807AA1,0x102C5BF9,0x00000000
-	long		0x3FFD0000,0xDD2399BC,0x31252AA3,0x00000000
-	long		0x3FFD0000,0xE3B2A855,0x6B8FC517,0x00000000
-	long		0x3FFD0000,0xEA2D764F,0x64315989,0x00000000
-	long		0x3FFD0000,0xF3BF5BF8,0xBAD1A21D,0x00000000
-	long		0x3FFE0000,0x801CE39E,0x0D205C9A,0x00000000
-	long		0x3FFE0000,0x8630A2DA,0xDA1ED066,0x00000000
-	long		0x3FFE0000,0x8C1AD445,0xF3E09B8C,0x00000000
-	long		0x3FFE0000,0x91DB8F16,0x64F350E2,0x00000000
-	long		0x3FFE0000,0x97731420,0x365E538C,0x00000000
-	long		0x3FFE0000,0x9CE1C8E6,0xA0B8CDBA,0x00000000
-	long		0x3FFE0000,0xA22832DB,0xCADAAE09,0x00000000
-	long		0x3FFE0000,0xA746F2DD,0xB7602294,0x00000000
-	long		0x3FFE0000,0xAC3EC0FB,0x997DD6A2,0x00000000
-	long		0x3FFE0000,0xB110688A,0xEBDC6F6A,0x00000000
-	long		0x3FFE0000,0xB5BCC490,0x59ECC4B0,0x00000000
-	long		0x3FFE0000,0xBA44BC7D,0xD470782F,0x00000000
-	long		0x3FFE0000,0xBEA94144,0xFD049AAC,0x00000000
-	long		0x3FFE0000,0xC2EB4ABB,0x661628B6,0x00000000
-	long		0x3FFE0000,0xC70BD54C,0xE602EE14,0x00000000
-	long		0x3FFE0000,0xCD000549,0xADEC7159,0x00000000
-	long		0x3FFE0000,0xD48457D2,0xD8EA4EA3,0x00000000
-	long		0x3FFE0000,0xDB948DA7,0x12DECE3B,0x00000000
-	long		0x3FFE0000,0xE23855F9,0x69E8096A,0x00000000
-	long		0x3FFE0000,0xE8771129,0xC4353259,0x00000000
-	long		0x3FFE0000,0xEE57C16E,0x0D379C0D,0x00000000
-	long		0x3FFE0000,0xF3E10211,0xA87C3779,0x00000000
-	long		0x3FFE0000,0xF919039D,0x758B8D41,0x00000000
-	long		0x3FFE0000,0xFE058B8F,0x64935FB3,0x00000000
-	long		0x3FFF0000,0x8155FB49,0x7B685D04,0x00000000
-	long		0x3FFF0000,0x83889E35,0x49D108E1,0x00000000
-	long		0x3FFF0000,0x859CFA76,0x511D724B,0x00000000
-	long		0x3FFF0000,0x87952ECF,0xFF8131E7,0x00000000
-	long		0x3FFF0000,0x89732FD1,0x9557641B,0x00000000
-	long		0x3FFF0000,0x8B38CAD1,0x01932A35,0x00000000
-	long		0x3FFF0000,0x8CE7A8D8,0x301EE6B5,0x00000000
-	long		0x3FFF0000,0x8F46A39E,0x2EAE5281,0x00000000
-	long		0x3FFF0000,0x922DA7D7,0x91888487,0x00000000
-	long		0x3FFF0000,0x94D19FCB,0xDEDF5241,0x00000000
-	long		0x3FFF0000,0x973AB944,0x19D2A08B,0x00000000
-	long		0x3FFF0000,0x996FF00E,0x08E10B96,0x00000000
-	long		0x3FFF0000,0x9B773F95,0x12321DA7,0x00000000
-	long		0x3FFF0000,0x9D55CC32,0x0F935624,0x00000000
-	long		0x3FFF0000,0x9F100575,0x006CC571,0x00000000
-	long		0x3FFF0000,0xA0A9C290,0xD97CC06C,0x00000000
-	long		0x3FFF0000,0xA22659EB,0xEBC0630A,0x00000000
-	long		0x3FFF0000,0xA388B4AF,0xF6EF0EC9,0x00000000
-	long		0x3FFF0000,0xA4D35F10,0x61D292C4,0x00000000
-	long		0x3FFF0000,0xA60895DC,0xFBE3187E,0x00000000
-	long		0x3FFF0000,0xA72A51DC,0x7367BEAC,0x00000000
-	long		0x3FFF0000,0xA83A5153,0x0956168F,0x00000000
-	long		0x3FFF0000,0xA93A2007,0x7539546E,0x00000000
-	long		0x3FFF0000,0xAA9E7245,0x023B2605,0x00000000
-	long		0x3FFF0000,0xAC4C84BA,0x6FE4D58F,0x00000000
-	long		0x3FFF0000,0xADCE4A4A,0x606B9712,0x00000000
-	long		0x3FFF0000,0xAF2A2DCD,0x8D263C9C,0x00000000
-	long		0x3FFF0000,0xB0656F81,0xF22265C7,0x00000000
-	long		0x3FFF0000,0xB1846515,0x0F71496A,0x00000000
-	long		0x3FFF0000,0xB28AAA15,0x6F9ADA35,0x00000000
-	long		0x3FFF0000,0xB37B44FF,0x3766B895,0x00000000
-	long		0x3FFF0000,0xB458C3DC,0xE9630433,0x00000000
-	long		0x3FFF0000,0xB525529D,0x562246BD,0x00000000
-	long		0x3FFF0000,0xB5E2CCA9,0x5F9D88CC,0x00000000
-	long		0x3FFF0000,0xB692CADA,0x7ACA1ADA,0x00000000
-	long		0x3FFF0000,0xB736AEA7,0xA6925838,0x00000000
-	long		0x3FFF0000,0xB7CFAB28,0x7E9F7B36,0x00000000
-	long		0x3FFF0000,0xB85ECC66,0xCB219835,0x00000000
-	long		0x3FFF0000,0xB8E4FD5A,0x20A593DA,0x00000000
-	long		0x3FFF0000,0xB99F41F6,0x4AFF9BB5,0x00000000
-	long		0x3FFF0000,0xBA7F1E17,0x842BBE7B,0x00000000
-	long		0x3FFF0000,0xBB471285,0x7637E17D,0x00000000
-	long		0x3FFF0000,0xBBFABE8A,0x4788DF6F,0x00000000
-	long		0x3FFF0000,0xBC9D0FAD,0x2B689D79,0x00000000
-	long		0x3FFF0000,0xBD306A39,0x471ECD86,0x00000000
-	long		0x3FFF0000,0xBDB6C731,0x856AF18A,0x00000000
-	long		0x3FFF0000,0xBE31CAC5,0x02E80D70,0x00000000
-	long		0x3FFF0000,0xBEA2D55C,0xE33194E2,0x00000000
-	long		0x3FFF0000,0xBF0B10B7,0xC03128F0,0x00000000
-	long		0x3FFF0000,0xBF6B7A18,0xDACB778D,0x00000000
-	long		0x3FFF0000,0xBFC4EA46,0x63FA18F6,0x00000000
-	long		0x3FFF0000,0xC0181BDE,0x8B89A454,0x00000000
-	long		0x3FFF0000,0xC065B066,0xCFBF6439,0x00000000
-	long		0x3FFF0000,0xC0AE345F,0x56340AE6,0x00000000
-	long		0x3FFF0000,0xC0F22291,0x9CB9E6A7,0x00000000
-
-	set		X,FP_SCR0
-	set		XDCARE,X+2
-	set		XFRAC,X+4
-	set		XFRACLO,X+8
-
-	set		ATANF,FP_SCR1
-	set		ATANFHI,ATANF+4
-	set		ATANFLO,ATANF+8
-
-	global		satan
-#--ENTRY POINT FOR ATAN(X), HERE X IS FINITE, NON-ZERO, AND NOT NAN'S
-satan:
-	fmov.x		(%a0),%fp0		# LOAD INPUT
-
-	mov.l		(%a0),%d1
-	mov.w		4(%a0),%d1
-	fmov.x		%fp0,X(%a6)
-	and.l		&0x7FFFFFFF,%d1
-
-	cmp.l		%d1,&0x3FFB8000		# |X| >= 1/16?
-	bge.b		ATANOK1
-	bra.w		ATANSM
-
-ATANOK1:
-	cmp.l		%d1,&0x4002FFFF		# |X| < 16 ?
-	ble.b		ATANMAIN
-	bra.w		ATANBIG
-
-#--THE MOST LIKELY CASE, |X| IN [1/16, 16). WE USE TABLE TECHNIQUE
-#--THE IDEA IS ATAN(X) = ATAN(F) + ATAN( [X-F] / [1+XF] ).
-#--SO IF F IS CHOSEN TO BE CLOSE TO X AND ATAN(F) IS STORED IN
-#--A TABLE, ALL WE NEED IS TO APPROXIMATE ATAN(U) WHERE
-#--U = (X-F)/(1+XF) IS SMALL (REMEMBER F IS CLOSE TO X). IT IS
-#--TRUE THAT A DIVIDE IS NOW NEEDED, BUT THE APPROXIMATION FOR
-#--ATAN(U) IS A VERY SHORT POLYNOMIAL AND THE INDEXING TO
-#--FETCH F AND SAVING OF REGISTERS CAN BE ALL HIDED UNDER THE
-#--DIVIDE. IN THE END THIS METHOD IS MUCH FASTER THAN A TRADITIONAL
-#--ONE. NOTE ALSO THAT THE TRADITIONAL SCHEME THAT APPROXIMATE
-#--ATAN(X) DIRECTLY WILL NEED TO USE A RATIONAL APPROXIMATION
-#--(DIVISION NEEDED) ANYWAY BECAUSE A POLYNOMIAL APPROXIMATION
-#--WILL INVOLVE A VERY LONG POLYNOMIAL.
-
-#--NOW WE SEE X AS +-2^K * 1.BBBBBBB....B <- 1. + 63 BITS
-#--WE CHOSE F TO BE +-2^K * 1.BBBB1
-#--THAT IS IT MATCHES THE EXPONENT AND FIRST 5 BITS OF X, THE
-#--SIXTH BITS IS SET TO BE 1. SINCE K = -4, -3, ..., 3, THERE
-#--ARE ONLY 8 TIMES 16 = 2^7 = 128 |F|'S. SINCE ATAN(-|F|) IS
-#-- -ATAN(|F|), WE NEED TO STORE ONLY ATAN(|F|).
-
-ATANMAIN:
-
-	and.l		&0xF8000000,XFRAC(%a6)	# FIRST 5 BITS
-	or.l		&0x04000000,XFRAC(%a6)	# SET 6-TH BIT TO 1
-	mov.l		&0x00000000,XFRACLO(%a6) # LOCATION OF X IS NOW F
-
-	fmov.x		%fp0,%fp1		# FP1 IS X
-	fmul.x		X(%a6),%fp1		# FP1 IS X*F, NOTE THAT X*F > 0
-	fsub.x		X(%a6),%fp0		# FP0 IS X-F
-	fadd.s		&0x3F800000,%fp1	# FP1 IS 1 + X*F
-	fdiv.x		%fp1,%fp0		# FP0 IS U = (X-F)/(1+X*F)
-
-#--WHILE THE DIVISION IS TAKING ITS TIME, WE FETCH ATAN(|F|)
-#--CREATE ATAN(F) AND STORE IT IN ATANF, AND
-#--SAVE REGISTERS FP2.
-
-	mov.l		%d2,-(%sp)		# SAVE d2 TEMPORARILY
-	mov.l		%d1,%d2			# THE EXP AND 16 BITS OF X
-	and.l		&0x00007800,%d1		# 4 VARYING BITS OF F'S FRACTION
-	and.l		&0x7FFF0000,%d2		# EXPONENT OF F
-	sub.l		&0x3FFB0000,%d2		# K+4
-	asr.l		&1,%d2
-	add.l		%d2,%d1			# THE 7 BITS IDENTIFYING F
-	asr.l		&7,%d1			# INDEX INTO TBL OF ATAN(|F|)
-	lea		ATANTBL(%pc),%a1
-	add.l		%d1,%a1			# ADDRESS OF ATAN(|F|)
-	mov.l		(%a1)+,ATANF(%a6)
-	mov.l		(%a1)+,ATANFHI(%a6)
-	mov.l		(%a1)+,ATANFLO(%a6)	# ATANF IS NOW ATAN(|F|)
-	mov.l		X(%a6),%d1		# LOAD SIGN AND EXPO. AGAIN
-	and.l		&0x80000000,%d1		# SIGN(F)
-	or.l		%d1,ATANF(%a6)		# ATANF IS NOW SIGN(F)*ATAN(|F|)
-	mov.l		(%sp)+,%d2		# RESTORE d2
-
-#--THAT'S ALL I HAVE TO DO FOR NOW,
-#--BUT ALAS, THE DIVIDE IS STILL CRANKING!
-
-#--U IN FP0, WE ARE NOW READY TO COMPUTE ATAN(U) AS
-#--U + A1*U*V*(A2 + V*(A3 + V)), V = U*U
-#--THE POLYNOMIAL MAY LOOK STRANGE, BUT IS NEVERTHELESS CORRECT.
-#--THE NATURAL FORM IS U + U*V*(A1 + V*(A2 + V*A3))
-#--WHAT WE HAVE HERE IS MERELY	A1 = A3, A2 = A1/A3, A3 = A2/A3.
-#--THE REASON FOR THIS REARRANGEMENT IS TO MAKE THE INDEPENDENT
-#--PARTS A1*U*V AND (A2 + ... STUFF) MORE LOAD-BALANCED
-
-	fmovm.x		&0x04,-(%sp)		# save fp2
-
-	fmov.x		%fp0,%fp1
-	fmul.x		%fp1,%fp1
-	fmov.d		ATANA3(%pc),%fp2
-	fadd.x		%fp1,%fp2		# A3+V
-	fmul.x		%fp1,%fp2		# V*(A3+V)
-	fmul.x		%fp0,%fp1		# U*V
-	fadd.d		ATANA2(%pc),%fp2	# A2+V*(A3+V)
-	fmul.d		ATANA1(%pc),%fp1	# A1*U*V
-	fmul.x		%fp2,%fp1		# A1*U*V*(A2+V*(A3+V))
-	fadd.x		%fp1,%fp0		# ATAN(U), FP1 RELEASED
-
-	fmovm.x		(%sp)+,&0x20		# restore fp2
-
-	fmov.l		%d0,%fpcr		# restore users rnd mode,prec
-	fadd.x		ATANF(%a6),%fp0		# ATAN(X)
-	bra		t_inx2
-
-ATANBORS:
-#--|X| IS IN d0 IN COMPACT FORM. FP1, d0 SAVED.
-#--FP0 IS X AND |X| <= 1/16 OR |X| >= 16.
-	cmp.l		%d1,&0x3FFF8000
-	bgt.w		ATANBIG			# I.E. |X| >= 16
-
-ATANSM:
-#--|X| <= 1/16
-#--IF |X| < 2^(-40), RETURN X AS ANSWER. OTHERWISE, APPROXIMATE
-#--ATAN(X) BY X + X*Y*(B1+Y*(B2+Y*(B3+Y*(B4+Y*(B5+Y*B6)))))
-#--WHICH IS X + X*Y*( [B1+Z*(B3+Z*B5)] + [Y*(B2+Z*(B4+Z*B6)] )
-#--WHERE Y = X*X, AND Z = Y*Y.
-
-	cmp.l		%d1,&0x3FD78000
-	blt.w		ATANTINY
-
-#--COMPUTE POLYNOMIAL
-	fmovm.x		&0x0c,-(%sp)		# save fp2/fp3
-
-	fmul.x		%fp0,%fp0		# FPO IS Y = X*X
-
-	fmov.x		%fp0,%fp1
-	fmul.x		%fp1,%fp1		# FP1 IS Z = Y*Y
-
-	fmov.d		ATANB6(%pc),%fp2
-	fmov.d		ATANB5(%pc),%fp3
-
-	fmul.x		%fp1,%fp2		# Z*B6
-	fmul.x		%fp1,%fp3		# Z*B5
-
-	fadd.d		ATANB4(%pc),%fp2	# B4+Z*B6
-	fadd.d		ATANB3(%pc),%fp3	# B3+Z*B5
-
-	fmul.x		%fp1,%fp2		# Z*(B4+Z*B6)
-	fmul.x		%fp3,%fp1		# Z*(B3+Z*B5)
-
-	fadd.d		ATANB2(%pc),%fp2	# B2+Z*(B4+Z*B6)
-	fadd.d		ATANB1(%pc),%fp1	# B1+Z*(B3+Z*B5)
-
-	fmul.x		%fp0,%fp2		# Y*(B2+Z*(B4+Z*B6))
-	fmul.x		X(%a6),%fp0		# X*Y
-
-	fadd.x		%fp2,%fp1		# [B1+Z*(B3+Z*B5)]+[Y*(B2+Z*(B4+Z*B6))]
-
-	fmul.x		%fp1,%fp0		# X*Y*([B1+Z*(B3+Z*B5)]+[Y*(B2+Z*(B4+Z*B6))])
-
-	fmovm.x		(%sp)+,&0x30		# restore fp2/fp3
-
-	fmov.l		%d0,%fpcr		# restore users rnd mode,prec
-	fadd.x		X(%a6),%fp0
-	bra		t_inx2
-
-ATANTINY:
-#--|X| < 2^(-40), ATAN(X) = X
-
-	fmov.l		%d0,%fpcr		# restore users rnd mode,prec
-	mov.b		&FMOV_OP,%d1		# last inst is MOVE
-	fmov.x		X(%a6),%fp0		# last inst - possible exception set
-
-	bra		t_catch
-
-ATANBIG:
-#--IF |X| > 2^(100), RETURN	SIGN(X)*(PI/2 - TINY). OTHERWISE,
-#--RETURN SIGN(X)*PI/2 + ATAN(-1/X).
-	cmp.l		%d1,&0x40638000
-	bgt.w		ATANHUGE
-
-#--APPROXIMATE ATAN(-1/X) BY
-#--X'+X'*Y*(C1+Y*(C2+Y*(C3+Y*(C4+Y*C5)))), X' = -1/X, Y = X'*X'
-#--THIS CAN BE RE-WRITTEN AS
-#--X'+X'*Y*( [C1+Z*(C3+Z*C5)] + [Y*(C2+Z*C4)] ), Z = Y*Y.
-
-	fmovm.x		&0x0c,-(%sp)		# save fp2/fp3
-
-	fmov.s		&0xBF800000,%fp1	# LOAD -1
-	fdiv.x		%fp0,%fp1		# FP1 IS -1/X
-
-#--DIVIDE IS STILL CRANKING
-
-	fmov.x		%fp1,%fp0		# FP0 IS X'
-	fmul.x		%fp0,%fp0		# FP0 IS Y = X'*X'
-	fmov.x		%fp1,X(%a6)		# X IS REALLY X'
-
-	fmov.x		%fp0,%fp1
-	fmul.x		%fp1,%fp1		# FP1 IS Z = Y*Y
-
-	fmov.d		ATANC5(%pc),%fp3
-	fmov.d		ATANC4(%pc),%fp2
-
-	fmul.x		%fp1,%fp3		# Z*C5
-	fmul.x		%fp1,%fp2		# Z*B4
-
-	fadd.d		ATANC3(%pc),%fp3	# C3+Z*C5
-	fadd.d		ATANC2(%pc),%fp2	# C2+Z*C4
-
-	fmul.x		%fp3,%fp1		# Z*(C3+Z*C5), FP3 RELEASED
-	fmul.x		%fp0,%fp2		# Y*(C2+Z*C4)
-
-	fadd.d		ATANC1(%pc),%fp1	# C1+Z*(C3+Z*C5)
-	fmul.x		X(%a6),%fp0		# X'*Y
-
-	fadd.x		%fp2,%fp1		# [Y*(C2+Z*C4)]+[C1+Z*(C3+Z*C5)]
-
-	fmul.x		%fp1,%fp0		# X'*Y*([B1+Z*(B3+Z*B5)]
-#					...	+[Y*(B2+Z*(B4+Z*B6))])
-	fadd.x		X(%a6),%fp0
-
-	fmovm.x		(%sp)+,&0x30		# restore fp2/fp3
-
-	fmov.l		%d0,%fpcr		# restore users rnd mode,prec
-	tst.b		(%a0)
-	bpl.b		pos_big
-
-neg_big:
-	fadd.x		NPIBY2(%pc),%fp0
-	bra		t_minx2
-
-pos_big:
-	fadd.x		PPIBY2(%pc),%fp0
-	bra		t_pinx2
-
-ATANHUGE:
-#--RETURN SIGN(X)*(PIBY2 - TINY) = SIGN(X)*PIBY2 - SIGN(X)*TINY
-	tst.b		(%a0)
-	bpl.b		pos_huge
-
-neg_huge:
-	fmov.x		NPIBY2(%pc),%fp0
-	fmov.l		%d0,%fpcr
-	fadd.x		PTINY(%pc),%fp0
-	bra		t_minx2
-
-pos_huge:
-	fmov.x		PPIBY2(%pc),%fp0
-	fmov.l		%d0,%fpcr
-	fadd.x		NTINY(%pc),%fp0
-	bra		t_pinx2
-
-	global		satand
-#--ENTRY POINT FOR ATAN(X) FOR DENORMALIZED ARGUMENT
-satand:
-	bra		t_extdnrm
-
-#########################################################################
-# sasin():  computes the inverse sine of a normalized input		#
-# sasind(): computes the inverse sine of a denormalized input		#
-#									#
-# INPUT ***************************************************************	#
-#	a0 = pointer to extended precision input			#
-#	d0 = round precision,mode					#
-#									#
-# OUTPUT **************************************************************	#
-#	fp0 = arcsin(X)							#
-#									#
-# ACCURACY and MONOTONICITY *******************************************	#
-#	The returned result is within 3 ulps in	64 significant bit,	#
-#	i.e. within 0.5001 ulp to 53 bits if the result is subsequently	#
-#	rounded to double precision. The result is provably monotonic	#
-#	in double precision.						#
-#									#
-# ALGORITHM ***********************************************************	#
-#									#
-#	ASIN								#
-#	1. If |X| >= 1, go to 3.					#
-#									#
-#	2. (|X| < 1) Calculate asin(X) by				#
-#		z := sqrt( [1-X][1+X] )					#
-#		asin(X) = atan( x / z ).				#
-#		Exit.							#
-#									#
-#	3. If |X| > 1, go to 5.						#
-#									#
-#	4. (|X| = 1) sgn := sign(X), return asin(X) := sgn * Pi/2. Exit.#
-#									#
-#	5. (|X| > 1) Generate an invalid operation by 0 * infinity.	#
-#		Exit.							#
-#									#
-#########################################################################
-
-	global		sasin
-sasin:
-	fmov.x		(%a0),%fp0		# LOAD INPUT
-
-	mov.l		(%a0),%d1
-	mov.w		4(%a0),%d1
-	and.l		&0x7FFFFFFF,%d1
-	cmp.l		%d1,&0x3FFF8000
-	bge.b		ASINBIG
-
-# This catch is added here for the '060 QSP. Originally, the call to
-# satan() would handle this case by causing the exception which would
-# not be caught until gen_except(). Now, with the exceptions being
-# detected inside of satan(), the exception would have been handled there
-# instead of inside sasin() as expected.
-	cmp.l		%d1,&0x3FD78000
-	blt.w		ASINTINY
-
-#--THIS IS THE USUAL CASE, |X| < 1
-#--ASIN(X) = ATAN( X / SQRT( (1-X)(1+X) ) )
-
-ASINMAIN:
-	fmov.s		&0x3F800000,%fp1
-	fsub.x		%fp0,%fp1		# 1-X
-	fmovm.x		&0x4,-(%sp)		#  {fp2}
-	fmov.s		&0x3F800000,%fp2
-	fadd.x		%fp0,%fp2		# 1+X
-	fmul.x		%fp2,%fp1		# (1+X)(1-X)
-	fmovm.x		(%sp)+,&0x20		#  {fp2}
-	fsqrt.x		%fp1			# SQRT([1-X][1+X])
-	fdiv.x		%fp1,%fp0		# X/SQRT([1-X][1+X])
-	fmovm.x		&0x01,-(%sp)		# save X/SQRT(...)
-	lea		(%sp),%a0		# pass ptr to X/SQRT(...)
-	bsr		satan
-	add.l		&0xc,%sp		# clear X/SQRT(...) from stack
-	bra		t_inx2
-
-ASINBIG:
-	fabs.x		%fp0			# |X|
-	fcmp.s		%fp0,&0x3F800000
-	fbgt		t_operr			# cause an operr exception
-
-#--|X| = 1, ASIN(X) = +- PI/2.
-ASINONE:
-	fmov.x		PIBY2(%pc),%fp0
-	mov.l		(%a0),%d1
-	and.l		&0x80000000,%d1		# SIGN BIT OF X
-	or.l		&0x3F800000,%d1		# +-1 IN SGL FORMAT
-	mov.l		%d1,-(%sp)		# push SIGN(X) IN SGL-FMT
-	fmov.l		%d0,%fpcr
-	fmul.s		(%sp)+,%fp0
-	bra		t_inx2
-
-#--|X| < 2^(-40), ATAN(X) = X
-ASINTINY:
-	fmov.l		%d0,%fpcr		# restore users rnd mode,prec
-	mov.b		&FMOV_OP,%d1		# last inst is MOVE
-	fmov.x		(%a0),%fp0		# last inst - possible exception
-	bra		t_catch
-
-	global		sasind
-#--ASIN(X) = X FOR DENORMALIZED X
-sasind:
-	bra		t_extdnrm
-
-#########################################################################
-# sacos():  computes the inverse cosine of a normalized input		#
-# sacosd(): computes the inverse cosine of a denormalized input		#
-#									#
-# INPUT ***************************************************************	#
-#	a0 = pointer to extended precision input			#
-#	d0 = round precision,mode					#
-#									#
-# OUTPUT ************************************************************** #
-#	fp0 = arccos(X)							#
-#									#
-# ACCURACY and MONOTONICITY *******************************************	#
-#	The returned result is within 3 ulps in	64 significant bit,	#
-#	i.e. within 0.5001 ulp to 53 bits if the result is subsequently	#
-#	rounded to double precision. The result is provably monotonic	#
-#	in double precision.						#
-#									#
-# ALGORITHM *********************************************************** #
-#									#
-#	ACOS								#
-#	1. If |X| >= 1, go to 3.					#
-#									#
-#	2. (|X| < 1) Calculate acos(X) by				#
-#		z := (1-X) / (1+X)					#
-#		acos(X) = 2 * atan( sqrt(z) ).				#
-#		Exit.							#
-#									#
-#	3. If |X| > 1, go to 5.						#
-#									#
-#	4. (|X| = 1) If X > 0, return 0. Otherwise, return Pi. Exit.	#
-#									#
-#	5. (|X| > 1) Generate an invalid operation by 0 * infinity.	#
-#		Exit.							#
-#									#
-#########################################################################
-
-	global		sacos
-sacos:
-	fmov.x		(%a0),%fp0		# LOAD INPUT
-
-	mov.l		(%a0),%d1		# pack exp w/ upper 16 fraction
-	mov.w		4(%a0),%d1
-	and.l		&0x7FFFFFFF,%d1
-	cmp.l		%d1,&0x3FFF8000
-	bge.b		ACOSBIG
-
-#--THIS IS THE USUAL CASE, |X| < 1
-#--ACOS(X) = 2 * ATAN(	SQRT( (1-X)/(1+X) ) )
-
-ACOSMAIN:
-	fmov.s		&0x3F800000,%fp1
-	fadd.x		%fp0,%fp1		# 1+X
-	fneg.x		%fp0			# -X
-	fadd.s		&0x3F800000,%fp0	# 1-X
-	fdiv.x		%fp1,%fp0		# (1-X)/(1+X)
-	fsqrt.x		%fp0			# SQRT((1-X)/(1+X))
-	mov.l		%d0,-(%sp)		# save original users fpcr
-	clr.l		%d0
-	fmovm.x		&0x01,-(%sp)		# save SQRT(...) to stack
-	lea		(%sp),%a0		# pass ptr to sqrt
-	bsr		satan			# ATAN(SQRT([1-X]/[1+X]))
-	add.l		&0xc,%sp		# clear SQRT(...) from stack
-
-	fmov.l		(%sp)+,%fpcr		# restore users round prec,mode
-	fadd.x		%fp0,%fp0		# 2 * ATAN( STUFF )
-	bra		t_pinx2
-
-ACOSBIG:
-	fabs.x		%fp0
-	fcmp.s		%fp0,&0x3F800000
-	fbgt		t_operr			# cause an operr exception
-
-#--|X| = 1, ACOS(X) = 0 OR PI
-	tst.b		(%a0)			# is X positive or negative?
-	bpl.b		ACOSP1
-
-#--X = -1
-#Returns PI and inexact exception
-ACOSM1:
-	fmov.x		PI(%pc),%fp0		# load PI
-	fmov.l		%d0,%fpcr		# load round mode,prec
-	fadd.s		&0x00800000,%fp0	# add a small value
-	bra		t_pinx2
-
-ACOSP1:
-	bra		ld_pzero		# answer is positive zero
-
-	global		sacosd
-#--ACOS(X) = PI/2 FOR DENORMALIZED X
-sacosd:
-	fmov.l		%d0,%fpcr		# load user's rnd mode/prec
-	fmov.x		PIBY2(%pc),%fp0
-	bra		t_pinx2
-
-#########################################################################
-# setox():    computes the exponential for a normalized input		#
-# setoxd():   computes the exponential for a denormalized input		#
-# setoxm1():  computes the exponential minus 1 for a normalized input	#
-# setoxm1d(): computes the exponential minus 1 for a denormalized input	#
-#									#
-# INPUT	*************************************************************** #
-#	a0 = pointer to extended precision input			#
-#	d0 = round precision,mode					#
-#									#
-# OUTPUT ************************************************************** #
-#	fp0 = exp(X) or exp(X)-1					#
-#									#
-# ACCURACY and MONOTONICITY ******************************************* #
-#	The returned result is within 0.85 ulps in 64 significant bit,	#
-#	i.e. within 0.5001 ulp to 53 bits if the result is subsequently #
-#	rounded to double precision. The result is provably monotonic	#
-#	in double precision.						#
-#									#
-# ALGORITHM and IMPLEMENTATION **************************************** #
-#									#
-#	setoxd								#
-#	------								#
-#	Step 1.	Set ans := 1.0						#
-#									#
-#	Step 2.	Return	ans := ans + sign(X)*2^(-126). Exit.		#
-#	Notes:	This will always generate one exception -- inexact.	#
-#									#
-#									#
-#	setox								#
-#	-----								#
-#									#
-#	Step 1.	Filter out extreme cases of input argument.		#
-#		1.1	If |X| >= 2^(-65), go to Step 1.3.		#
-#		1.2	Go to Step 7.					#
-#		1.3	If |X| < 16380 log(2), go to Step 2.		#
-#		1.4	Go to Step 8.					#
-#	Notes:	The usual case should take the branches 1.1 -> 1.3 -> 2.#
-#		To avoid the use of floating-point comparisons, a	#
-#		compact representation of |X| is used. This format is a	#
-#		32-bit integer, the upper (more significant) 16 bits	#
-#		are the sign and biased exponent field of |X|; the	#
-#		lower 16 bits are the 16 most significant fraction	#
-#		(including the explicit bit) bits of |X|. Consequently,	#
-#		the comparisons in Steps 1.1 and 1.3 can be performed	#
-#		by integer comparison. Note also that the constant	#
-#		16380 log(2) used in Step 1.3 is also in the compact	#
-#		form. Thus taking the branch to Step 2 guarantees	#
-#		|X| < 16380 log(2). There is no harm to have a small	#
-#		number of cases where |X| is less than,	but close to,	#
-#		16380 log(2) and the branch to Step 9 is taken.		#
-#									#
-#	Step 2.	Calculate N = round-to-nearest-int( X * 64/log2 ).	#
-#		2.1	Set AdjFlag := 0 (indicates the branch 1.3 -> 2 #
-#			was taken)					#
-#		2.2	N := round-to-nearest-integer( X * 64/log2 ).	#
-#		2.3	Calculate	J = N mod 64; so J = 0,1,2,..., #
-#			or 63.						#
-#		2.4	Calculate	M = (N - J)/64; so N = 64M + J.	#
-#		2.5	Calculate the address of the stored value of	#
-#			2^(J/64).					#
-#		2.6	Create the value Scale = 2^M.			#
-#	Notes:	The calculation in 2.2 is really performed by		#
-#			Z := X * constant				#
-#			N := round-to-nearest-integer(Z)		#
-#		where							#
-#			constant := single-precision( 64/log 2 ).	#
-#									#
-#		Using a single-precision constant avoids memory		#
-#		access. Another effect of using a single-precision	#
-#		"constant" is that the calculated value Z is		#
-#									#
-#			Z = X*(64/log2)*(1+eps), |eps| <= 2^(-24).	#
-#									#
-#		This error has to be considered later in Steps 3 and 4.	#
-#									#
-#	Step 3.	Calculate X - N*log2/64.				#
-#		3.1	R := X + N*L1,					#
-#				where L1 := single-precision(-log2/64).	#
-#		3.2	R := R + N*L2,					#
-#				L2 := extended-precision(-log2/64 - L1).#
-#	Notes:	a) The way L1 and L2 are chosen ensures L1+L2		#
-#		approximate the value -log2/64 to 88 bits of accuracy.	#
-#		b) N*L1 is exact because N is no longer than 22 bits	#
-#		and L1 is no longer than 24 bits.			#
-#		c) The calculation X+N*L1 is also exact due to		#
-#		cancellation. Thus, R is practically X+N(L1+L2) to full	#
-#		64 bits.						#
-#		d) It is important to estimate how large can |R| be	#
-#		after Step 3.2.						#
-#									#
-#		N = rnd-to-int( X*64/log2 (1+eps) ), |eps|<=2^(-24)	#
-#		X*64/log2 (1+eps)	=	N + f,	|f| <= 0.5	#
-#		X*64/log2 - N	=	f - eps*X 64/log2		#
-#		X - N*log2/64	=	f*log2/64 - eps*X		#
-#									#
-#									#
-#		Now |X| <= 16446 log2, thus				#
-#									#
-#			|X - N*log2/64| <= (0.5 + 16446/2^(18))*log2/64	#
-#					<= 0.57 log2/64.		#
-#		 This bound will be used in Step 4.			#
-#									#
-#	Step 4.	Approximate exp(R)-1 by a polynomial			#
-#		p = R + R*R*(A1 + R*(A2 + R*(A3 + R*(A4 + R*A5))))	#
-#	Notes:	a) In order to reduce memory access, the coefficients	#
-#		are made as "short" as possible: A1 (which is 1/2), A4	#
-#		and A5 are single precision; A2 and A3 are double	#
-#		precision.						#
-#		b) Even with the restrictions above,			#
-#		   |p - (exp(R)-1)| < 2^(-68.8) for all |R| <= 0.0062.	#
-#		Note that 0.0062 is slightly bigger than 0.57 log2/64.	#
-#		c) To fully utilize the pipeline, p is separated into	#
-#		two independent pieces of roughly equal complexities	#
-#			p = [ R + R*S*(A2 + S*A4) ]	+		#
-#				[ S*(A1 + S*(A3 + S*A5)) ]		#
-#		where S = R*R.						#
-#									#
-#	Step 5.	Compute 2^(J/64)*exp(R) = 2^(J/64)*(1+p) by		#
-#				ans := T + ( T*p + t)			#
-#		where T and t are the stored values for 2^(J/64).	#
-#	Notes:	2^(J/64) is stored as T and t where T+t approximates	#
-#		2^(J/64) to roughly 85 bits; T is in extended precision	#
-#		and t is in single precision. Note also that T is	#
-#		rounded to 62 bits so that the last two bits of T are	#
-#		zero. The reason for such a special form is that T-1,	#
-#		T-2, and T-8 will all be exact --- a property that will	#
-#		give much more accurate computation of the function	#
-#		EXPM1.							#
-#									#
-#	Step 6.	Reconstruction of exp(X)				#
-#			exp(X) = 2^M * 2^(J/64) * exp(R).		#
-#		6.1	If AdjFlag = 0, go to 6.3			#
-#		6.2	ans := ans * AdjScale				#
-#		6.3	Restore the user FPCR				#
-#		6.4	Return ans := ans * Scale. Exit.		#
-#	Notes:	If AdjFlag = 0, we have X = Mlog2 + Jlog2/64 + R,	#
-#		|M| <= 16380, and Scale = 2^M. Moreover, exp(X) will	#
-#		neither overflow nor underflow. If AdjFlag = 1, that	#
-#		means that						#
-#			X = (M1+M)log2 + Jlog2/64 + R, |M1+M| >= 16380.	#
-#		Hence, exp(X) may overflow or underflow or neither.	#
-#		When that is the case, AdjScale = 2^(M1) where M1 is	#
-#		approximately M. Thus 6.2 will never cause		#
-#		over/underflow. Possible exception in 6.4 is overflow	#
-#		or underflow. The inexact exception is not generated in	#
-#		6.4. Although one can argue that the inexact flag	#
-#		should always be raised, to simulate that exception	#
-#		cost to much than the flag is worth in practical uses.	#
-#									#
-#	Step 7.	Return 1 + X.						#
-#		7.1	ans := X					#
-#		7.2	Restore user FPCR.				#
-#		7.3	Return ans := 1 + ans. Exit			#
-#	Notes:	For non-zero X, the inexact exception will always be	#
-#		raised by 7.3. That is the only exception raised by 7.3.#
-#		Note also that we use the FMOVEM instruction to move X	#
-#		in Step 7.1 to avoid unnecessary trapping. (Although	#
-#		the FMOVEM may not seem relevant since X is normalized,	#
-#		the precaution will be useful in the library version of	#
-#		this code where the separate entry for denormalized	#
-#		inputs will be done away with.)				#
-#									#
-#	Step 8.	Handle exp(X) where |X| >= 16380log2.			#
-#		8.1	If |X| > 16480 log2, go to Step 9.		#
-#		(mimic 2.2 - 2.6)					#
-#		8.2	N := round-to-integer( X * 64/log2 )		#
-#		8.3	Calculate J = N mod 64, J = 0,1,...,63		#
-#		8.4	K := (N-J)/64, M1 := truncate(K/2), M = K-M1,	#
-#			AdjFlag := 1.					#
-#		8.5	Calculate the address of the stored value	#
-#			2^(J/64).					#
-#		8.6	Create the values Scale = 2^M, AdjScale = 2^M1.	#
-#		8.7	Go to Step 3.					#
-#	Notes:	Refer to notes for 2.2 - 2.6.				#
-#									#
-#	Step 9.	Handle exp(X), |X| > 16480 log2.			#
-#		9.1	If X < 0, go to 9.3				#
-#		9.2	ans := Huge, go to 9.4				#
-#		9.3	ans := Tiny.					#
-#		9.4	Restore user FPCR.				#
-#		9.5	Return ans := ans * ans. Exit.			#
-#	Notes:	Exp(X) will surely overflow or underflow, depending on	#
-#		X's sign. "Huge" and "Tiny" are respectively large/tiny	#
-#		extended-precision numbers whose square over/underflow	#
-#		with an inexact result. Thus, 9.5 always raises the	#
-#		inexact together with either overflow or underflow.	#
-#									#
-#	setoxm1d							#
-#	--------							#
-#									#
-#	Step 1.	Set ans := 0						#
-#									#
-#	Step 2.	Return	ans := X + ans. Exit.				#
-#	Notes:	This will return X with the appropriate rounding	#
-#		 precision prescribed by the user FPCR.			#
-#									#
-#	setoxm1								#
-#	-------								#
-#									#
-#	Step 1.	Check |X|						#
-#		1.1	If |X| >= 1/4, go to Step 1.3.			#
-#		1.2	Go to Step 7.					#
-#		1.3	If |X| < 70 log(2), go to Step 2.		#
-#		1.4	Go to Step 10.					#
-#	Notes:	The usual case should take the branches 1.1 -> 1.3 -> 2.#
-#		However, it is conceivable |X| can be small very often	#
-#		because EXPM1 is intended to evaluate exp(X)-1		#
-#		accurately when |X| is small. For further details on	#
-#		the comparisons, see the notes on Step 1 of setox.	#
-#									#
-#	Step 2.	Calculate N = round-to-nearest-int( X * 64/log2 ).	#
-#		2.1	N := round-to-nearest-integer( X * 64/log2 ).	#
-#		2.2	Calculate	J = N mod 64; so J = 0,1,2,..., #
-#			or 63.						#
-#		2.3	Calculate	M = (N - J)/64; so N = 64M + J.	#
-#		2.4	Calculate the address of the stored value of	#
-#			2^(J/64).					#
-#		2.5	Create the values Sc = 2^M and			#
-#			OnebySc := -2^(-M).				#
-#	Notes:	See the notes on Step 2 of setox.			#
-#									#
-#	Step 3.	Calculate X - N*log2/64.				#
-#		3.1	R := X + N*L1,					#
-#				where L1 := single-precision(-log2/64).	#
-#		3.2	R := R + N*L2,					#
-#				L2 := extended-precision(-log2/64 - L1).#
-#	Notes:	Applying the analysis of Step 3 of setox in this case	#
-#		shows that |R| <= 0.0055 (note that |X| <= 70 log2 in	#
-#		this case).						#
-#									#
-#	Step 4.	Approximate exp(R)-1 by a polynomial			#
-#			p = R+R*R*(A1+R*(A2+R*(A3+R*(A4+R*(A5+R*A6)))))	#
-#	Notes:	a) In order to reduce memory access, the coefficients	#
-#		are made as "short" as possible: A1 (which is 1/2), A5	#
-#		and A6 are single precision; A2, A3 and A4 are double	#
-#		precision.						#
-#		b) Even with the restriction above,			#
-#			|p - (exp(R)-1)| <	|R| * 2^(-72.7)		#
-#		for all |R| <= 0.0055.					#
-#		c) To fully utilize the pipeline, p is separated into	#
-#		two independent pieces of roughly equal complexity	#
-#			p = [ R*S*(A2 + S*(A4 + S*A6)) ]	+	#
-#				[ R + S*(A1 + S*(A3 + S*A5)) ]		#
-#		where S = R*R.						#
-#									#
-#	Step 5.	Compute 2^(J/64)*p by					#
-#				p := T*p				#
-#		where T and t are the stored values for 2^(J/64).	#
-#	Notes:	2^(J/64) is stored as T and t where T+t approximates	#
-#		2^(J/64) to roughly 85 bits; T is in extended precision	#
-#		and t is in single precision. Note also that T is	#
-#		rounded to 62 bits so that the last two bits of T are	#
-#		zero. The reason for such a special form is that T-1,	#
-#		T-2, and T-8 will all be exact --- a property that will	#
-#		be exploited in Step 6 below. The total relative error	#
-#		in p is no bigger than 2^(-67.7) compared to the final	#
-#		result.							#
-#									#
-#	Step 6.	Reconstruction of exp(X)-1				#
-#			exp(X)-1 = 2^M * ( 2^(J/64) + p - 2^(-M) ).	#
-#		6.1	If M <= 63, go to Step 6.3.			#
-#		6.2	ans := T + (p + (t + OnebySc)). Go to 6.6	#
-#		6.3	If M >= -3, go to 6.5.				#
-#		6.4	ans := (T + (p + t)) + OnebySc. Go to 6.6	#
-#		6.5	ans := (T + OnebySc) + (p + t).			#
-#		6.6	Restore user FPCR.				#
-#		6.7	Return ans := Sc * ans. Exit.			#
-#	Notes:	The various arrangements of the expressions give	#
-#		accurate evaluations.					#
-#									#
-#	Step 7.	exp(X)-1 for |X| < 1/4.					#
-#		7.1	If |X| >= 2^(-65), go to Step 9.		#
-#		7.2	Go to Step 8.					#
-#									#
-#	Step 8.	Calculate exp(X)-1, |X| < 2^(-65).			#
-#		8.1	If |X| < 2^(-16312), goto 8.3			#
-#		8.2	Restore FPCR; return ans := X - 2^(-16382).	#
-#			Exit.						#
-#		8.3	X := X * 2^(140).				#
-#		8.4	Restore FPCR; ans := ans - 2^(-16382).		#
-#		 Return ans := ans*2^(140). Exit			#
-#	Notes:	The idea is to return "X - tiny" under the user		#
-#		precision and rounding modes. To avoid unnecessary	#
-#		inefficiency, we stay away from denormalized numbers	#
-#		the best we can. For |X| >= 2^(-16312), the		#
-#		straightforward 8.2 generates the inexact exception as	#
-#		the case warrants.					#
-#									#
-#	Step 9.	Calculate exp(X)-1, |X| < 1/4, by a polynomial		#
-#			p = X + X*X*(B1 + X*(B2 + ... + X*B12))		#
-#	Notes:	a) In order to reduce memory access, the coefficients	#
-#		are made as "short" as possible: B1 (which is 1/2), B9	#
-#		to B12 are single precision; B3 to B8 are double	#
-#		precision; and B2 is double extended.			#
-#		b) Even with the restriction above,			#
-#			|p - (exp(X)-1)| < |X| 2^(-70.6)		#
-#		for all |X| <= 0.251.					#
-#		Note that 0.251 is slightly bigger than 1/4.		#
-#		c) To fully preserve accuracy, the polynomial is	#
-#		computed as						#
-#			X + ( S*B1 +	Q ) where S = X*X and		#
-#			Q	=	X*S*(B2 + X*(B3 + ... + X*B12))	#
-#		d) To fully utilize the pipeline, Q is separated into	#
-#		two independent pieces of roughly equal complexity	#
-#			Q = [ X*S*(B2 + S*(B4 + ... + S*B12)) ] +	#
-#				[ S*S*(B3 + S*(B5 + ... + S*B11)) ]	#
-#									#
-#	Step 10. Calculate exp(X)-1 for |X| >= 70 log 2.		#
-#		10.1 If X >= 70log2 , exp(X) - 1 = exp(X) for all	#
-#		practical purposes. Therefore, go to Step 1 of setox.	#
-#		10.2 If X <= -70log2, exp(X) - 1 = -1 for all practical	#
-#		purposes.						#
-#		ans := -1						#
-#		Restore user FPCR					#
-#		Return ans := ans + 2^(-126). Exit.			#
-#	Notes:	10.2 will always create an inexact and return -1 + tiny	#
-#		in the user rounding precision and mode.		#
-#									#
-#########################################################################
-
-L2:	long		0x3FDC0000,0x82E30865,0x4361C4C6,0x00000000
-
-EEXPA3:	long		0x3FA55555,0x55554CC1
-EEXPA2:	long		0x3FC55555,0x55554A54
-
-EM1A4:	long		0x3F811111,0x11174385
-EM1A3:	long		0x3FA55555,0x55554F5A
-
-EM1A2:	long		0x3FC55555,0x55555555,0x00000000,0x00000000
-
-EM1B8:	long		0x3EC71DE3,0xA5774682
-EM1B7:	long		0x3EFA01A0,0x19D7CB68
-
-EM1B6:	long		0x3F2A01A0,0x1A019DF3
-EM1B5:	long		0x3F56C16C,0x16C170E2
-
-EM1B4:	long		0x3F811111,0x11111111
-EM1B3:	long		0x3FA55555,0x55555555
-
-EM1B2:	long		0x3FFC0000,0xAAAAAAAA,0xAAAAAAAB
-	long		0x00000000
-
-TWO140:	long		0x48B00000,0x00000000
-TWON140:
-	long		0x37300000,0x00000000
-
-EEXPTBL:
-	long		0x3FFF0000,0x80000000,0x00000000,0x00000000
-	long		0x3FFF0000,0x8164D1F3,0xBC030774,0x9F841A9B
-	long		0x3FFF0000,0x82CD8698,0xAC2BA1D8,0x9FC1D5B9
-	long		0x3FFF0000,0x843A28C3,0xACDE4048,0xA0728369
-	long		0x3FFF0000,0x85AAC367,0xCC487B14,0x1FC5C95C
-	long		0x3FFF0000,0x871F6196,0x9E8D1010,0x1EE85C9F
-	long		0x3FFF0000,0x88980E80,0x92DA8528,0x9FA20729
-	long		0x3FFF0000,0x8A14D575,0x496EFD9C,0xA07BF9AF
-	long		0x3FFF0000,0x8B95C1E3,0xEA8BD6E8,0xA0020DCF
-	long		0x3FFF0000,0x8D1ADF5B,0x7E5BA9E4,0x205A63DA
-	long		0x3FFF0000,0x8EA4398B,0x45CD53C0,0x1EB70051
-	long		0x3FFF0000,0x9031DC43,0x1466B1DC,0x1F6EB029
-	long		0x3FFF0000,0x91C3D373,0xAB11C338,0xA0781494
-	long		0x3FFF0000,0x935A2B2F,0x13E6E92C,0x9EB319B0
-	long		0x3FFF0000,0x94F4EFA8,0xFEF70960,0x2017457D
-	long		0x3FFF0000,0x96942D37,0x20185A00,0x1F11D537
-	long		0x3FFF0000,0x9837F051,0x8DB8A970,0x9FB952DD
-	long		0x3FFF0000,0x99E04593,0x20B7FA64,0x1FE43087
-	long		0x3FFF0000,0x9B8D39B9,0xD54E5538,0x1FA2A818
-	long		0x3FFF0000,0x9D3ED9A7,0x2CFFB750,0x1FDE494D
-	long		0x3FFF0000,0x9EF53260,0x91A111AC,0x20504890
-	long		0x3FFF0000,0xA0B0510F,0xB9714FC4,0xA073691C
-	long		0x3FFF0000,0xA2704303,0x0C496818,0x1F9B7A05
-	long		0x3FFF0000,0xA43515AE,0x09E680A0,0xA0797126
-	long		0x3FFF0000,0xA5FED6A9,0xB15138EC,0xA071A140
-	long		0x3FFF0000,0xA7CD93B4,0xE9653568,0x204F62DA
-	long		0x3FFF0000,0xA9A15AB4,0xEA7C0EF8,0x1F283C4A
-	long		0x3FFF0000,0xAB7A39B5,0xA93ED338,0x9F9A7FDC
-	long		0x3FFF0000,0xAD583EEA,0x42A14AC8,0xA05B3FAC
-	long		0x3FFF0000,0xAF3B78AD,0x690A4374,0x1FDF2610
-	long		0x3FFF0000,0xB123F581,0xD2AC2590,0x9F705F90
-	long		0x3FFF0000,0xB311C412,0xA9112488,0x201F678A
-	long		0x3FFF0000,0xB504F333,0xF9DE6484,0x1F32FB13
-	long		0x3FFF0000,0xB6FD91E3,0x28D17790,0x20038B30
-	long		0x3FFF0000,0xB8FBAF47,0x62FB9EE8,0x200DC3CC
-	long		0x3FFF0000,0xBAFF5AB2,0x133E45FC,0x9F8B2AE6
-	long		0x3FFF0000,0xBD08A39F,0x580C36C0,0xA02BBF70
-	long		0x3FFF0000,0xBF1799B6,0x7A731084,0xA00BF518
-	long		0x3FFF0000,0xC12C4CCA,0x66709458,0xA041DD41
-	long		0x3FFF0000,0xC346CCDA,0x24976408,0x9FDF137B
-	long		0x3FFF0000,0xC5672A11,0x5506DADC,0x201F1568
-	long		0x3FFF0000,0xC78D74C8,0xABB9B15C,0x1FC13A2E
-	long		0x3FFF0000,0xC9B9BD86,0x6E2F27A4,0xA03F8F03
-	long		0x3FFF0000,0xCBEC14FE,0xF2727C5C,0x1FF4907D
-	long		0x3FFF0000,0xCE248C15,0x1F8480E4,0x9E6E53E4
-	long		0x3FFF0000,0xD06333DA,0xEF2B2594,0x1FD6D45C
-	long		0x3FFF0000,0xD2A81D91,0xF12AE45C,0xA076EDB9
-	long		0x3FFF0000,0xD4F35AAB,0xCFEDFA20,0x9FA6DE21
-	long		0x3FFF0000,0xD744FCCA,0xD69D6AF4,0x1EE69A2F
-	long		0x3FFF0000,0xD99D15C2,0x78AFD7B4,0x207F439F
-	long		0x3FFF0000,0xDBFBB797,0xDAF23754,0x201EC207
-	long		0x3FFF0000,0xDE60F482,0x5E0E9124,0x9E8BE175
-	long		0x3FFF0000,0xE0CCDEEC,0x2A94E110,0x20032C4B
-	long		0x3FFF0000,0xE33F8972,0xBE8A5A50,0x2004DFF5
-	long		0x3FFF0000,0xE5B906E7,0x7C8348A8,0x1E72F47A
-	long		0x3FFF0000,0xE8396A50,0x3C4BDC68,0x1F722F22
-	long		0x3FFF0000,0xEAC0C6E7,0xDD243930,0xA017E945
-	long		0x3FFF0000,0xED4F301E,0xD9942B84,0x1F401A5B
-	long		0x3FFF0000,0xEFE4B99B,0xDCDAF5CC,0x9FB9A9E3
-	long		0x3FFF0000,0xF281773C,0x59FFB138,0x20744C05
-	long		0x3FFF0000,0xF5257D15,0x2486CC2C,0x1F773A19
-	long		0x3FFF0000,0xF7D0DF73,0x0AD13BB8,0x1FFE90D5
-	long		0x3FFF0000,0xFA83B2DB,0x722A033C,0xA041ED22
-	long		0x3FFF0000,0xFD3E0C0C,0xF486C174,0x1F853F3A
-
-	set		ADJFLAG,L_SCR2
-	set		SCALE,FP_SCR0
-	set		ADJSCALE,FP_SCR1
-	set		SC,FP_SCR0
-	set		ONEBYSC,FP_SCR1
-
-	global		setox
-setox:
-#--entry point for EXP(X), here X is finite, non-zero, and not NaN's
-
-#--Step 1.
-	mov.l		(%a0),%d1		# load part of input X
-	and.l		&0x7FFF0000,%d1		# biased expo. of X
-	cmp.l		%d1,&0x3FBE0000		# 2^(-65)
-	bge.b		EXPC1			# normal case
-	bra		EXPSM
-
-EXPC1:
-#--The case |X| >= 2^(-65)
-	mov.w		4(%a0),%d1		# expo. and partial sig. of |X|
-	cmp.l		%d1,&0x400CB167		# 16380 log2 trunc. 16 bits
-	blt.b		EXPMAIN			# normal case
-	bra		EEXPBIG
-
-EXPMAIN:
-#--Step 2.
-#--This is the normal branch:	2^(-65) <= |X| < 16380 log2.
-	fmov.x		(%a0),%fp0		# load input from (a0)
-
-	fmov.x		%fp0,%fp1
-	fmul.s		&0x42B8AA3B,%fp0	# 64/log2 * X
-	fmovm.x		&0xc,-(%sp)		# save fp2 {%fp2/%fp3}
-	mov.l		&0,ADJFLAG(%a6)
-	fmov.l		%fp0,%d1		# N = int( X * 64/log2 )
-	lea		EEXPTBL(%pc),%a1
-	fmov.l		%d1,%fp0		# convert to floating-format
-
-	mov.l		%d1,L_SCR1(%a6)		# save N temporarily
-	and.l		&0x3F,%d1		# D0 is J = N mod 64
-	lsl.l		&4,%d1
-	add.l		%d1,%a1			# address of 2^(J/64)
-	mov.l		L_SCR1(%a6),%d1
-	asr.l		&6,%d1			# D0 is M
-	add.w		&0x3FFF,%d1		# biased expo. of 2^(M)
-	mov.w		L2(%pc),L_SCR1(%a6)	# prefetch L2, no need in CB
-
-EXPCONT1:
-#--Step 3.
-#--fp1,fp2 saved on the stack. fp0 is N, fp1 is X,
-#--a0 points to 2^(J/64), D0 is biased expo. of 2^(M)
-	fmov.x		%fp0,%fp2
-	fmul.s		&0xBC317218,%fp0	# N * L1, L1 = lead(-log2/64)
-	fmul.x		L2(%pc),%fp2		# N * L2, L1+L2 = -log2/64
-	fadd.x		%fp1,%fp0		# X + N*L1
-	fadd.x		%fp2,%fp0		# fp0 is R, reduced arg.
-
-#--Step 4.
-#--WE NOW COMPUTE EXP(R)-1 BY A POLYNOMIAL
-#-- R + R*R*(A1 + R*(A2 + R*(A3 + R*(A4 + R*A5))))
-#--TO FULLY UTILIZE THE PIPELINE, WE COMPUTE S = R*R
-#--[R+R*S*(A2+S*A4)] + [S*(A1+S*(A3+S*A5))]
-
-	fmov.x		%fp0,%fp1
-	fmul.x		%fp1,%fp1		# fp1 IS S = R*R
-
-	fmov.s		&0x3AB60B70,%fp2	# fp2 IS A5
-
-	fmul.x		%fp1,%fp2		# fp2 IS S*A5
-	fmov.x		%fp1,%fp3
-	fmul.s		&0x3C088895,%fp3	# fp3 IS S*A4
-
-	fadd.d		EEXPA3(%pc),%fp2	# fp2 IS A3+S*A5
-	fadd.d		EEXPA2(%pc),%fp3	# fp3 IS A2+S*A4
-
-	fmul.x		%fp1,%fp2		# fp2 IS S*(A3+S*A5)
-	mov.w		%d1,SCALE(%a6)		# SCALE is 2^(M) in extended
-	mov.l		&0x80000000,SCALE+4(%a6)
-	clr.l		SCALE+8(%a6)
-
-	fmul.x		%fp1,%fp3		# fp3 IS S*(A2+S*A4)
-
-	fadd.s		&0x3F000000,%fp2	# fp2 IS A1+S*(A3+S*A5)
-	fmul.x		%fp0,%fp3		# fp3 IS R*S*(A2+S*A4)
-
-	fmul.x		%fp1,%fp2		# fp2 IS S*(A1+S*(A3+S*A5))
-	fadd.x		%fp3,%fp0		# fp0 IS R+R*S*(A2+S*A4),
-
-	fmov.x		(%a1)+,%fp1		# fp1 is lead. pt. of 2^(J/64)
-	fadd.x		%fp2,%fp0		# fp0 is EXP(R) - 1
-
-#--Step 5
-#--final reconstruction process
-#--EXP(X) = 2^M * ( 2^(J/64) + 2^(J/64)*(EXP(R)-1) )
-
-	fmul.x		%fp1,%fp0		# 2^(J/64)*(Exp(R)-1)
-	fmovm.x		(%sp)+,&0x30		# fp2 restored {%fp2/%fp3}
-	fadd.s		(%a1),%fp0		# accurate 2^(J/64)
-
-	fadd.x		%fp1,%fp0		# 2^(J/64) + 2^(J/64)*...
-	mov.l		ADJFLAG(%a6),%d1
-
-#--Step 6
-	tst.l		%d1
-	beq.b		NORMAL
-ADJUST:
-	fmul.x		ADJSCALE(%a6),%fp0
-NORMAL:
-	fmov.l		%d0,%fpcr		# restore user FPCR
-	mov.b		&FMUL_OP,%d1		# last inst is MUL
-	fmul.x		SCALE(%a6),%fp0		# multiply 2^(M)
-	bra		t_catch
-
-EXPSM:
-#--Step 7
-	fmovm.x		(%a0),&0x80		# load X
-	fmov.l		%d0,%fpcr
-	fadd.s		&0x3F800000,%fp0	# 1+X in user mode
-	bra		t_pinx2
-
-EEXPBIG:
-#--Step 8
-	cmp.l		%d1,&0x400CB27C		# 16480 log2
-	bgt.b		EXP2BIG
-#--Steps 8.2 -- 8.6
-	fmov.x		(%a0),%fp0		# load input from (a0)
-
-	fmov.x		%fp0,%fp1
-	fmul.s		&0x42B8AA3B,%fp0	# 64/log2 * X
-	fmovm.x		&0xc,-(%sp)		# save fp2 {%fp2/%fp3}
-	mov.l		&1,ADJFLAG(%a6)
-	fmov.l		%fp0,%d1		# N = int( X * 64/log2 )
-	lea		EEXPTBL(%pc),%a1
-	fmov.l		%d1,%fp0		# convert to floating-format
-	mov.l		%d1,L_SCR1(%a6)		# save N temporarily
-	and.l		&0x3F,%d1		# D0 is J = N mod 64
-	lsl.l		&4,%d1
-	add.l		%d1,%a1			# address of 2^(J/64)
-	mov.l		L_SCR1(%a6),%d1
-	asr.l		&6,%d1			# D0 is K
-	mov.l		%d1,L_SCR1(%a6)		# save K temporarily
-	asr.l		&1,%d1			# D0 is M1
-	sub.l		%d1,L_SCR1(%a6)		# a1 is M
-	add.w		&0x3FFF,%d1		# biased expo. of 2^(M1)
-	mov.w		%d1,ADJSCALE(%a6)	# ADJSCALE := 2^(M1)
-	mov.l		&0x80000000,ADJSCALE+4(%a6)
-	clr.l		ADJSCALE+8(%a6)
-	mov.l		L_SCR1(%a6),%d1		# D0 is M
-	add.w		&0x3FFF,%d1		# biased expo. of 2^(M)
-	bra.w		EXPCONT1		# go back to Step 3
-
-EXP2BIG:
-#--Step 9
-	tst.b		(%a0)			# is X positive or negative?
-	bmi		t_unfl2
-	bra		t_ovfl2
-
-	global		setoxd
-setoxd:
-#--entry point for EXP(X), X is denormalized
-	mov.l		(%a0),-(%sp)
-	andi.l		&0x80000000,(%sp)
-	ori.l		&0x00800000,(%sp)	# sign(X)*2^(-126)
-
-	fmov.s		&0x3F800000,%fp0
-
-	fmov.l		%d0,%fpcr
-	fadd.s		(%sp)+,%fp0
-	bra		t_pinx2
-
-	global		setoxm1
-setoxm1:
-#--entry point for EXPM1(X), here X is finite, non-zero, non-NaN
-
-#--Step 1.
-#--Step 1.1
-	mov.l		(%a0),%d1		# load part of input X
-	and.l		&0x7FFF0000,%d1		# biased expo. of X
-	cmp.l		%d1,&0x3FFD0000		# 1/4
-	bge.b		EM1CON1			# |X| >= 1/4
-	bra		EM1SM
-
-EM1CON1:
-#--Step 1.3
-#--The case |X| >= 1/4
-	mov.w		4(%a0),%d1		# expo. and partial sig. of |X|
-	cmp.l		%d1,&0x4004C215		# 70log2 rounded up to 16 bits
-	ble.b		EM1MAIN			# 1/4 <= |X| <= 70log2
-	bra		EM1BIG
-
-EM1MAIN:
-#--Step 2.
-#--This is the case:	1/4 <= |X| <= 70 log2.
-	fmov.x		(%a0),%fp0		# load input from (a0)
-
-	fmov.x		%fp0,%fp1
-	fmul.s		&0x42B8AA3B,%fp0	# 64/log2 * X
-	fmovm.x		&0xc,-(%sp)		# save fp2 {%fp2/%fp3}
-	fmov.l		%fp0,%d1		# N = int( X * 64/log2 )
-	lea		EEXPTBL(%pc),%a1
-	fmov.l		%d1,%fp0		# convert to floating-format
-
-	mov.l		%d1,L_SCR1(%a6)		# save N temporarily
-	and.l		&0x3F,%d1		# D0 is J = N mod 64
-	lsl.l		&4,%d1
-	add.l		%d1,%a1			# address of 2^(J/64)
-	mov.l		L_SCR1(%a6),%d1
-	asr.l		&6,%d1			# D0 is M
-	mov.l		%d1,L_SCR1(%a6)		# save a copy of M
-
-#--Step 3.
-#--fp1,fp2 saved on the stack. fp0 is N, fp1 is X,
-#--a0 points to 2^(J/64), D0 and a1 both contain M
-	fmov.x		%fp0,%fp2
-	fmul.s		&0xBC317218,%fp0	# N * L1, L1 = lead(-log2/64)
-	fmul.x		L2(%pc),%fp2		# N * L2, L1+L2 = -log2/64
-	fadd.x		%fp1,%fp0		# X + N*L1
-	fadd.x		%fp2,%fp0		# fp0 is R, reduced arg.
-	add.w		&0x3FFF,%d1		# D0 is biased expo. of 2^M
-
-#--Step 4.
-#--WE NOW COMPUTE EXP(R)-1 BY A POLYNOMIAL
-#-- R + R*R*(A1 + R*(A2 + R*(A3 + R*(A4 + R*(A5 + R*A6)))))
-#--TO FULLY UTILIZE THE PIPELINE, WE COMPUTE S = R*R
-#--[R*S*(A2+S*(A4+S*A6))] + [R+S*(A1+S*(A3+S*A5))]
-
-	fmov.x		%fp0,%fp1
-	fmul.x		%fp1,%fp1		# fp1 IS S = R*R
-
-	fmov.s		&0x3950097B,%fp2	# fp2 IS a6
-
-	fmul.x		%fp1,%fp2		# fp2 IS S*A6
-	fmov.x		%fp1,%fp3
-	fmul.s		&0x3AB60B6A,%fp3	# fp3 IS S*A5
-
-	fadd.d		EM1A4(%pc),%fp2		# fp2 IS A4+S*A6
-	fadd.d		EM1A3(%pc),%fp3		# fp3 IS A3+S*A5
-	mov.w		%d1,SC(%a6)		# SC is 2^(M) in extended
-	mov.l		&0x80000000,SC+4(%a6)
-	clr.l		SC+8(%a6)
-
-	fmul.x		%fp1,%fp2		# fp2 IS S*(A4+S*A6)
-	mov.l		L_SCR1(%a6),%d1		# D0 is	M
-	neg.w		%d1			# D0 is -M
-	fmul.x		%fp1,%fp3		# fp3 IS S*(A3+S*A5)
-	add.w		&0x3FFF,%d1		# biased expo. of 2^(-M)
-	fadd.d		EM1A2(%pc),%fp2		# fp2 IS A2+S*(A4+S*A6)
-	fadd.s		&0x3F000000,%fp3	# fp3 IS A1+S*(A3+S*A5)
-
-	fmul.x		%fp1,%fp2		# fp2 IS S*(A2+S*(A4+S*A6))
-	or.w		&0x8000,%d1		# signed/expo. of -2^(-M)
-	mov.w		%d1,ONEBYSC(%a6)	# OnebySc is -2^(-M)
-	mov.l		&0x80000000,ONEBYSC+4(%a6)
-	clr.l		ONEBYSC+8(%a6)
-	fmul.x		%fp3,%fp1		# fp1 IS S*(A1+S*(A3+S*A5))
-
-	fmul.x		%fp0,%fp2		# fp2 IS R*S*(A2+S*(A4+S*A6))
-	fadd.x		%fp1,%fp0		# fp0 IS R+S*(A1+S*(A3+S*A5))
-
-	fadd.x		%fp2,%fp0		# fp0 IS EXP(R)-1
-
-	fmovm.x		(%sp)+,&0x30		# fp2 restored {%fp2/%fp3}
-
-#--Step 5
-#--Compute 2^(J/64)*p
-
-	fmul.x		(%a1),%fp0		# 2^(J/64)*(Exp(R)-1)
-
-#--Step 6
-#--Step 6.1
-	mov.l		L_SCR1(%a6),%d1		# retrieve M
-	cmp.l		%d1,&63
-	ble.b		MLE63
-#--Step 6.2	M >= 64
-	fmov.s		12(%a1),%fp1		# fp1 is t
-	fadd.x		ONEBYSC(%a6),%fp1	# fp1 is t+OnebySc
-	fadd.x		%fp1,%fp0		# p+(t+OnebySc), fp1 released
-	fadd.x		(%a1),%fp0		# T+(p+(t+OnebySc))
-	bra		EM1SCALE
-MLE63:
-#--Step 6.3	M <= 63
-	cmp.l		%d1,&-3
-	bge.b		MGEN3
-MLTN3:
-#--Step 6.4	M <= -4
-	fadd.s		12(%a1),%fp0		# p+t
-	fadd.x		(%a1),%fp0		# T+(p+t)
-	fadd.x		ONEBYSC(%a6),%fp0	# OnebySc + (T+(p+t))
-	bra		EM1SCALE
-MGEN3:
-#--Step 6.5	-3 <= M <= 63
-	fmov.x		(%a1)+,%fp1		# fp1 is T
-	fadd.s		(%a1),%fp0		# fp0 is p+t
-	fadd.x		ONEBYSC(%a6),%fp1	# fp1 is T+OnebySc
-	fadd.x		%fp1,%fp0		# (T+OnebySc)+(p+t)
-
-EM1SCALE:
-#--Step 6.6
-	fmov.l		%d0,%fpcr
-	fmul.x		SC(%a6),%fp0
-	bra		t_inx2
-
-EM1SM:
-#--Step 7	|X| < 1/4.
-	cmp.l		%d1,&0x3FBE0000		# 2^(-65)
-	bge.b		EM1POLY
-
-EM1TINY:
-#--Step 8	|X| < 2^(-65)
-	cmp.l		%d1,&0x00330000		# 2^(-16312)
-	blt.b		EM12TINY
-#--Step 8.2
-	mov.l		&0x80010000,SC(%a6)	# SC is -2^(-16382)
-	mov.l		&0x80000000,SC+4(%a6)
-	clr.l		SC+8(%a6)
-	fmov.x		(%a0),%fp0
-	fmov.l		%d0,%fpcr
-	mov.b		&FADD_OP,%d1		# last inst is ADD
-	fadd.x		SC(%a6),%fp0
-	bra		t_catch
-
-EM12TINY:
-#--Step 8.3
-	fmov.x		(%a0),%fp0
-	fmul.d		TWO140(%pc),%fp0
-	mov.l		&0x80010000,SC(%a6)
-	mov.l		&0x80000000,SC+4(%a6)
-	clr.l		SC+8(%a6)
-	fadd.x		SC(%a6),%fp0
-	fmov.l		%d0,%fpcr
-	mov.b		&FMUL_OP,%d1		# last inst is MUL
-	fmul.d		TWON140(%pc),%fp0
-	bra		t_catch
-
-EM1POLY:
-#--Step 9	exp(X)-1 by a simple polynomial
-	fmov.x		(%a0),%fp0		# fp0 is X
-	fmul.x		%fp0,%fp0		# fp0 is S := X*X
-	fmovm.x		&0xc,-(%sp)		# save fp2 {%fp2/%fp3}
-	fmov.s		&0x2F30CAA8,%fp1	# fp1 is B12
-	fmul.x		%fp0,%fp1		# fp1 is S*B12
-	fmov.s		&0x310F8290,%fp2	# fp2 is B11
-	fadd.s		&0x32D73220,%fp1	# fp1 is B10+S*B12
-
-	fmul.x		%fp0,%fp2		# fp2 is S*B11
-	fmul.x		%fp0,%fp1		# fp1 is S*(B10 + ...
-
-	fadd.s		&0x3493F281,%fp2	# fp2 is B9+S*...
-	fadd.d		EM1B8(%pc),%fp1		# fp1 is B8+S*...
-
-	fmul.x		%fp0,%fp2		# fp2 is S*(B9+...
-	fmul.x		%fp0,%fp1		# fp1 is S*(B8+...
-
-	fadd.d		EM1B7(%pc),%fp2		# fp2 is B7+S*...
-	fadd.d		EM1B6(%pc),%fp1		# fp1 is B6+S*...
-
-	fmul.x		%fp0,%fp2		# fp2 is S*(B7+...
-	fmul.x		%fp0,%fp1		# fp1 is S*(B6+...
-
-	fadd.d		EM1B5(%pc),%fp2		# fp2 is B5+S*...
-	fadd.d		EM1B4(%pc),%fp1		# fp1 is B4+S*...
-
-	fmul.x		%fp0,%fp2		# fp2 is S*(B5+...
-	fmul.x		%fp0,%fp1		# fp1 is S*(B4+...
-
-	fadd.d		EM1B3(%pc),%fp2		# fp2 is B3+S*...
-	fadd.x		EM1B2(%pc),%fp1		# fp1 is B2+S*...
-
-	fmul.x		%fp0,%fp2		# fp2 is S*(B3+...
-	fmul.x		%fp0,%fp1		# fp1 is S*(B2+...
-
-	fmul.x		%fp0,%fp2		# fp2 is S*S*(B3+...)
-	fmul.x		(%a0),%fp1		# fp1 is X*S*(B2...
-
-	fmul.s		&0x3F000000,%fp0	# fp0 is S*B1
-	fadd.x		%fp2,%fp1		# fp1 is Q
-
-	fmovm.x		(%sp)+,&0x30		# fp2 restored {%fp2/%fp3}
-
-	fadd.x		%fp1,%fp0		# fp0 is S*B1+Q
-
-	fmov.l		%d0,%fpcr
-	fadd.x		(%a0),%fp0
-	bra		t_inx2
-
-EM1BIG:
-#--Step 10	|X| > 70 log2
-	mov.l		(%a0),%d1
-	cmp.l		%d1,&0
-	bgt.w		EXPC1
-#--Step 10.2
-	fmov.s		&0xBF800000,%fp0	# fp0 is -1
-	fmov.l		%d0,%fpcr
-	fadd.s		&0x00800000,%fp0	# -1 + 2^(-126)
-	bra		t_minx2
-
-	global		setoxm1d
-setoxm1d:
-#--entry point for EXPM1(X), here X is denormalized
-#--Step 0.
-	bra		t_extdnrm
-
-#########################################################################
-# sgetexp():  returns the exponent portion of the input argument.	#
-#	      The exponent bias is removed and the exponent value is	#
-#	      returned as an extended precision number in fp0.		#
-# sgetexpd(): handles denormalized numbers.				#
-#									#
-# sgetman():  extracts the mantissa of the input argument. The		#
-#	      mantissa is converted to an extended precision number w/	#
-#	      an exponent of $3fff and is returned in fp0. The range of #
-#	      the result is [1.0 - 2.0).				#
-# sgetmand(): handles denormalized numbers.				#
-#									#
-# INPUT *************************************************************** #
-#	a0  = pointer to extended precision input			#
-#									#
-# OUTPUT ************************************************************** #
-#	fp0 = exponent(X) or mantissa(X)				#
-#									#
-#########################################################################
-
-	global		sgetexp
-sgetexp:
-	mov.w		SRC_EX(%a0),%d0		# get the exponent
-	bclr		&0xf,%d0		# clear the sign bit
-	subi.w		&0x3fff,%d0		# subtract off the bias
-	fmov.w		%d0,%fp0		# return exp in fp0
-	blt.b		sgetexpn		# it's negative
-	rts
-
-sgetexpn:
-	mov.b		&neg_bmask,FPSR_CC(%a6)	# set 'N' ccode bit
-	rts
-
-	global		sgetexpd
-sgetexpd:
-	bsr.l		norm			# normalize
-	neg.w		%d0			# new exp = -(shft amt)
-	subi.w		&0x3fff,%d0		# subtract off the bias
-	fmov.w		%d0,%fp0		# return exp in fp0
-	mov.b		&neg_bmask,FPSR_CC(%a6)	# set 'N' ccode bit
-	rts
-
-	global		sgetman
-sgetman:
-	mov.w		SRC_EX(%a0),%d0		# get the exp
-	ori.w		&0x7fff,%d0		# clear old exp
-	bclr		&0xe,%d0		# make it the new exp +-3fff
-
-# here, we build the result in a tmp location so as not to disturb the input
-	mov.l		SRC_HI(%a0),FP_SCR0_HI(%a6) # copy to tmp loc
-	mov.l		SRC_LO(%a0),FP_SCR0_LO(%a6) # copy to tmp loc
-	mov.w		%d0,FP_SCR0_EX(%a6)	# insert new exponent
-	fmov.x		FP_SCR0(%a6),%fp0	# put new value back in fp0
-	bmi.b		sgetmann		# it's negative
-	rts
-
-sgetmann:
-	mov.b		&neg_bmask,FPSR_CC(%a6)	# set 'N' ccode bit
-	rts
-
-#
-# For denormalized numbers, shift the mantissa until the j-bit = 1,
-# then load the exponent with +/1 $3fff.
-#
-	global		sgetmand
-sgetmand:
-	bsr.l		norm			# normalize exponent
-	bra.b		sgetman
-
-#########################################################################
-# scosh():  computes the hyperbolic cosine of a normalized input	#
-# scoshd(): computes the hyperbolic cosine of a denormalized input	#
-#									#
-# INPUT ***************************************************************	#
-#	a0 = pointer to extended precision input			#
-#	d0 = round precision,mode					#
-#									#
-# OUTPUT **************************************************************	#
-#	fp0 = cosh(X)							#
-#									#
-# ACCURACY and MONOTONICITY *******************************************	#
-#	The returned result is within 3 ulps in 64 significant bit,	#
-#	i.e. within 0.5001 ulp to 53 bits if the result is subsequently	#
-#	rounded to double precision. The result is provably monotonic	#
-#	in double precision.						#
-#									#
-# ALGORITHM ***********************************************************	#
-#									#
-#	COSH								#
-#	1. If |X| > 16380 log2, go to 3.				#
-#									#
-#	2. (|X| <= 16380 log2) Cosh(X) is obtained by the formulae	#
-#		y = |X|, z = exp(Y), and				#
-#		cosh(X) = (1/2)*( z + 1/z ).				#
-#		Exit.							#
-#									#
-#	3. (|X| > 16380 log2). If |X| > 16480 log2, go to 5.		#
-#									#
-#	4. (16380 log2 < |X| <= 16480 log2)				#
-#		cosh(X) = sign(X) * exp(|X|)/2.				#
-#		However, invoking exp(|X|) may cause premature		#
-#		overflow. Thus, we calculate sinh(X) as follows:	#
-#		Y	:= |X|						#
-#		Fact	:=	2**(16380)				#
-#		Y'	:= Y - 16381 log2				#
-#		cosh(X) := Fact * exp(Y').				#
-#		Exit.							#
-#									#
-#	5. (|X| > 16480 log2) sinh(X) must overflow. Return		#
-#		Huge*Huge to generate overflow and an infinity with	#
-#		the appropriate sign. Huge is the largest finite number	#
-#		in extended format. Exit.				#
-#									#
-#########################################################################
-
-TWO16380:
-	long		0x7FFB0000,0x80000000,0x00000000,0x00000000
-
-	global		scosh
-scosh:
-	fmov.x		(%a0),%fp0		# LOAD INPUT
-
-	mov.l		(%a0),%d1
-	mov.w		4(%a0),%d1
-	and.l		&0x7FFFFFFF,%d1
-	cmp.l		%d1,&0x400CB167
-	bgt.b		COSHBIG
-
-#--THIS IS THE USUAL CASE, |X| < 16380 LOG2
-#--COSH(X) = (1/2) * ( EXP(X) + 1/EXP(X) )
-
-	fabs.x		%fp0			# |X|
-
-	mov.l		%d0,-(%sp)
-	clr.l		%d0
-	fmovm.x		&0x01,-(%sp)		# save |X| to stack
-	lea		(%sp),%a0		# pass ptr to |X|
-	bsr		setox			# FP0 IS EXP(|X|)
-	add.l		&0xc,%sp		# erase |X| from stack
-	fmul.s		&0x3F000000,%fp0	# (1/2)EXP(|X|)
-	mov.l		(%sp)+,%d0
-
-	fmov.s		&0x3E800000,%fp1	# (1/4)
-	fdiv.x		%fp0,%fp1		# 1/(2 EXP(|X|))
-
-	fmov.l		%d0,%fpcr
-	mov.b		&FADD_OP,%d1		# last inst is ADD
-	fadd.x		%fp1,%fp0
-	bra		t_catch
-
-COSHBIG:
-	cmp.l		%d1,&0x400CB2B3
-	bgt.b		COSHHUGE
-
-	fabs.x		%fp0
-	fsub.d		T1(%pc),%fp0		# (|X|-16381LOG2_LEAD)
-	fsub.d		T2(%pc),%fp0		# |X| - 16381 LOG2, ACCURATE
-
-	mov.l		%d0,-(%sp)
-	clr.l		%d0
-	fmovm.x		&0x01,-(%sp)		# save fp0 to stack
-	lea		(%sp),%a0		# pass ptr to fp0
-	bsr		setox
-	add.l		&0xc,%sp		# clear fp0 from stack
-	mov.l		(%sp)+,%d0
-
-	fmov.l		%d0,%fpcr
-	mov.b		&FMUL_OP,%d1		# last inst is MUL
-	fmul.x		TWO16380(%pc),%fp0
-	bra		t_catch
-
-COSHHUGE:
-	bra		t_ovfl2
-
-	global		scoshd
-#--COSH(X) = 1 FOR DENORMALIZED X
-scoshd:
-	fmov.s		&0x3F800000,%fp0
-
-	fmov.l		%d0,%fpcr
-	fadd.s		&0x00800000,%fp0
-	bra		t_pinx2
-
-#########################################################################
-# ssinh():  computes the hyperbolic sine of a normalized input		#
-# ssinhd(): computes the hyperbolic sine of a denormalized input	#
-#									#
-# INPUT *************************************************************** #
-#	a0 = pointer to extended precision input			#
-#	d0 = round precision,mode					#
-#									#
-# OUTPUT ************************************************************** #
-#	fp0 = sinh(X)							#
-#									#
-# ACCURACY and MONOTONICITY *******************************************	#
-#	The returned result is within 3 ulps in 64 significant bit,	#
-#	i.e. within 0.5001 ulp to 53 bits if the result is subsequently #
-#	rounded to double precision. The result is provably monotonic	#
-#	in double precision.						#
-#									#
-# ALGORITHM *********************************************************** #
-#									#
-#       SINH								#
-#       1. If |X| > 16380 log2, go to 3.				#
-#									#
-#       2. (|X| <= 16380 log2) Sinh(X) is obtained by the formula	#
-#               y = |X|, sgn = sign(X), and z = expm1(Y),		#
-#               sinh(X) = sgn*(1/2)*( z + z/(1+z) ).			#
-#          Exit.							#
-#									#
-#       3. If |X| > 16480 log2, go to 5.				#
-#									#
-#       4. (16380 log2 < |X| <= 16480 log2)				#
-#               sinh(X) = sign(X) * exp(|X|)/2.				#
-#          However, invoking exp(|X|) may cause premature overflow.	#
-#          Thus, we calculate sinh(X) as follows:			#
-#             Y       := |X|						#
-#             sgn     := sign(X)					#
-#             sgnFact := sgn * 2**(16380)				#
-#             Y'      := Y - 16381 log2					#
-#             sinh(X) := sgnFact * exp(Y').				#
-#          Exit.							#
-#									#
-#       5. (|X| > 16480 log2) sinh(X) must overflow. Return		#
-#          sign(X)*Huge*Huge to generate overflow and an infinity with	#
-#          the appropriate sign. Huge is the largest finite number in	#
-#          extended format. Exit.					#
-#									#
-#########################################################################
-
-	global		ssinh
-ssinh:
-	fmov.x		(%a0),%fp0		# LOAD INPUT
-
-	mov.l		(%a0),%d1
-	mov.w		4(%a0),%d1
-	mov.l		%d1,%a1			# save (compacted) operand
-	and.l		&0x7FFFFFFF,%d1
-	cmp.l		%d1,&0x400CB167
-	bgt.b		SINHBIG
-
-#--THIS IS THE USUAL CASE, |X| < 16380 LOG2
-#--Y = |X|, Z = EXPM1(Y), SINH(X) = SIGN(X)*(1/2)*( Z + Z/(1+Z) )
-
-	fabs.x		%fp0			# Y = |X|
-
-	movm.l		&0x8040,-(%sp)		# {a1/d0}
-	fmovm.x		&0x01,-(%sp)		# save Y on stack
-	lea		(%sp),%a0		# pass ptr to Y
-	clr.l		%d0
-	bsr		setoxm1			# FP0 IS Z = EXPM1(Y)
-	add.l		&0xc,%sp		# clear Y from stack
-	fmov.l		&0,%fpcr
-	movm.l		(%sp)+,&0x0201		# {a1/d0}
-
-	fmov.x		%fp0,%fp1
-	fadd.s		&0x3F800000,%fp1	# 1+Z
-	fmov.x		%fp0,-(%sp)
-	fdiv.x		%fp1,%fp0		# Z/(1+Z)
-	mov.l		%a1,%d1
-	and.l		&0x80000000,%d1
-	or.l		&0x3F000000,%d1
-	fadd.x		(%sp)+,%fp0
-	mov.l		%d1,-(%sp)
-
-	fmov.l		%d0,%fpcr
-	mov.b		&FMUL_OP,%d1		# last inst is MUL
-	fmul.s		(%sp)+,%fp0		# last fp inst - possible exceptions set
-	bra		t_catch
-
-SINHBIG:
-	cmp.l		%d1,&0x400CB2B3
-	bgt		t_ovfl
-	fabs.x		%fp0
-	fsub.d		T1(%pc),%fp0		# (|X|-16381LOG2_LEAD)
-	mov.l		&0,-(%sp)
-	mov.l		&0x80000000,-(%sp)
-	mov.l		%a1,%d1
-	and.l		&0x80000000,%d1
-	or.l		&0x7FFB0000,%d1
-	mov.l		%d1,-(%sp)		# EXTENDED FMT
-	fsub.d		T2(%pc),%fp0		# |X| - 16381 LOG2, ACCURATE
-
-	mov.l		%d0,-(%sp)
-	clr.l		%d0
-	fmovm.x		&0x01,-(%sp)		# save fp0 on stack
-	lea		(%sp),%a0		# pass ptr to fp0
-	bsr		setox
-	add.l		&0xc,%sp		# clear fp0 from stack
-
-	mov.l		(%sp)+,%d0
-	fmov.l		%d0,%fpcr
-	mov.b		&FMUL_OP,%d1		# last inst is MUL
-	fmul.x		(%sp)+,%fp0		# possible exception
-	bra		t_catch
-
-	global		ssinhd
-#--SINH(X) = X FOR DENORMALIZED X
-ssinhd:
-	bra		t_extdnrm
-
-#########################################################################
-# stanh():  computes the hyperbolic tangent of a normalized input	#
-# stanhd(): computes the hyperbolic tangent of a denormalized input	#
-#									#
-# INPUT ***************************************************************	#
-#	a0 = pointer to extended precision input			#
-#	d0 = round precision,mode					#
-#									#
-# OUTPUT **************************************************************	#
-#	fp0 = tanh(X)							#
-#									#
-# ACCURACY and MONOTONICITY *******************************************	#
-#	The returned result is within 3 ulps in 64 significant bit,	#
-#	i.e. within 0.5001 ulp to 53 bits if the result is subsequently #
-#	rounded to double precision. The result is provably monotonic	#
-#	in double precision.						#
-#									#
-# ALGORITHM ***********************************************************	#
-#									#
-#	TANH								#
-#	1. If |X| >= (5/2) log2 or |X| <= 2**(-40), go to 3.		#
-#									#
-#	2. (2**(-40) < |X| < (5/2) log2) Calculate tanh(X) by		#
-#		sgn := sign(X), y := 2|X|, z := expm1(Y), and		#
-#		tanh(X) = sgn*( z/(2+z) ).				#
-#		Exit.							#
-#									#
-#	3. (|X| <= 2**(-40) or |X| >= (5/2) log2). If |X| < 1,		#
-#		go to 7.						#
-#									#
-#	4. (|X| >= (5/2) log2) If |X| >= 50 log2, go to 6.		#
-#									#
-#	5. ((5/2) log2 <= |X| < 50 log2) Calculate tanh(X) by		#
-#		sgn := sign(X), y := 2|X|, z := exp(Y),			#
-#		tanh(X) = sgn - [ sgn*2/(1+z) ].			#
-#		Exit.							#
-#									#
-#	6. (|X| >= 50 log2) Tanh(X) = +-1 (round to nearest). Thus, we	#
-#		calculate Tanh(X) by					#
-#		sgn := sign(X), Tiny := 2**(-126),			#
-#		tanh(X) := sgn - sgn*Tiny.				#
-#		Exit.							#
-#									#
-#	7. (|X| < 2**(-40)). Tanh(X) = X.	Exit.			#
-#									#
-#########################################################################
-
-	set		X,FP_SCR0
-	set		XFRAC,X+4
-
-	set		SGN,L_SCR3
-
-	set		V,FP_SCR0
-
-	global		stanh
-stanh:
-	fmov.x		(%a0),%fp0		# LOAD INPUT
-
-	fmov.x		%fp0,X(%a6)
-	mov.l		(%a0),%d1
-	mov.w		4(%a0),%d1
-	mov.l		%d1,X(%a6)
-	and.l		&0x7FFFFFFF,%d1
-	cmp.l		%d1, &0x3fd78000	# is |X| < 2^(-40)?
-	blt.w		TANHBORS		# yes
-	cmp.l		%d1, &0x3fffddce	# is |X| > (5/2)LOG2?
-	bgt.w		TANHBORS		# yes
-
-#--THIS IS THE USUAL CASE
-#--Y = 2|X|, Z = EXPM1(Y), TANH(X) = SIGN(X) * Z / (Z+2).
-
-	mov.l		X(%a6),%d1
-	mov.l		%d1,SGN(%a6)
-	and.l		&0x7FFF0000,%d1
-	add.l		&0x00010000,%d1		# EXPONENT OF 2|X|
-	mov.l		%d1,X(%a6)
-	and.l		&0x80000000,SGN(%a6)
-	fmov.x		X(%a6),%fp0		# FP0 IS Y = 2|X|
-
-	mov.l		%d0,-(%sp)
-	clr.l		%d0
-	fmovm.x		&0x1,-(%sp)		# save Y on stack
-	lea		(%sp),%a0		# pass ptr to Y
-	bsr		setoxm1			# FP0 IS Z = EXPM1(Y)
-	add.l		&0xc,%sp		# clear Y from stack
-	mov.l		(%sp)+,%d0
-
-	fmov.x		%fp0,%fp1
-	fadd.s		&0x40000000,%fp1	# Z+2
-	mov.l		SGN(%a6),%d1
-	fmov.x		%fp1,V(%a6)
-	eor.l		%d1,V(%a6)
-
-	fmov.l		%d0,%fpcr		# restore users round prec,mode
-	fdiv.x		V(%a6),%fp0
-	bra		t_inx2
-
-TANHBORS:
-	cmp.l		%d1,&0x3FFF8000
-	blt.w		TANHSM
-
-	cmp.l		%d1,&0x40048AA1
-	bgt.w		TANHHUGE
-
-#-- (5/2) LOG2 < |X| < 50 LOG2,
-#--TANH(X) = 1 - (2/[EXP(2X)+1]). LET Y = 2|X|, SGN = SIGN(X),
-#--TANH(X) = SGN -	SGN*2/[EXP(Y)+1].
-
-	mov.l		X(%a6),%d1
-	mov.l		%d1,SGN(%a6)
-	and.l		&0x7FFF0000,%d1
-	add.l		&0x00010000,%d1		# EXPO OF 2|X|
-	mov.l		%d1,X(%a6)		# Y = 2|X|
-	and.l		&0x80000000,SGN(%a6)
-	mov.l		SGN(%a6),%d1
-	fmov.x		X(%a6),%fp0		# Y = 2|X|
-
-	mov.l		%d0,-(%sp)
-	clr.l		%d0
-	fmovm.x		&0x01,-(%sp)		# save Y on stack
-	lea		(%sp),%a0		# pass ptr to Y
-	bsr		setox			# FP0 IS EXP(Y)
-	add.l		&0xc,%sp		# clear Y from stack
-	mov.l		(%sp)+,%d0
-	mov.l		SGN(%a6),%d1
-	fadd.s		&0x3F800000,%fp0	# EXP(Y)+1
-
-	eor.l		&0xC0000000,%d1		# -SIGN(X)*2
-	fmov.s		%d1,%fp1		# -SIGN(X)*2 IN SGL FMT
-	fdiv.x		%fp0,%fp1		# -SIGN(X)2 / [EXP(Y)+1 ]
-
-	mov.l		SGN(%a6),%d1
-	or.l		&0x3F800000,%d1		# SGN
-	fmov.s		%d1,%fp0		# SGN IN SGL FMT
-
-	fmov.l		%d0,%fpcr		# restore users round prec,mode
-	mov.b		&FADD_OP,%d1		# last inst is ADD
-	fadd.x		%fp1,%fp0
-	bra		t_inx2
-
-TANHSM:
-	fmov.l		%d0,%fpcr		# restore users round prec,mode
-	mov.b		&FMOV_OP,%d1		# last inst is MOVE
-	fmov.x		X(%a6),%fp0		# last inst - possible exception set
-	bra		t_catch
-
-#---RETURN SGN(X) - SGN(X)EPS
-TANHHUGE:
-	mov.l		X(%a6),%d1
-	and.l		&0x80000000,%d1
-	or.l		&0x3F800000,%d1
-	fmov.s		%d1,%fp0
-	and.l		&0x80000000,%d1
-	eor.l		&0x80800000,%d1		# -SIGN(X)*EPS
-
-	fmov.l		%d0,%fpcr		# restore users round prec,mode
-	fadd.s		%d1,%fp0
-	bra		t_inx2
-
-	global		stanhd
-#--TANH(X) = X FOR DENORMALIZED X
-stanhd:
-	bra		t_extdnrm
-
-#########################################################################
-# slogn():    computes the natural logarithm of a normalized input	#
-# slognd():   computes the natural logarithm of a denormalized input	#
-# slognp1():  computes the log(1+X) of a normalized input		#
-# slognp1d(): computes the log(1+X) of a denormalized input		#
-#									#
-# INPUT ***************************************************************	#
-#	a0 = pointer to extended precision input			#
-#	d0 = round precision,mode					#
-#									#
-# OUTPUT **************************************************************	#
-#	fp0 = log(X) or log(1+X)					#
-#									#
-# ACCURACY and MONOTONICITY *******************************************	#
-#	The returned result is within 2 ulps in 64 significant bit,	#
-#	i.e. within 0.5001 ulp to 53 bits if the result is subsequently	#
-#	rounded to double precision. The result is provably monotonic	#
-#	in double precision.						#
-#									#
-# ALGORITHM ***********************************************************	#
-#	LOGN:								#
-#	Step 1. If |X-1| < 1/16, approximate log(X) by an odd		#
-#		polynomial in u, where u = 2(X-1)/(X+1). Otherwise,	#
-#		move on to Step 2.					#
-#									#
-#	Step 2. X = 2**k * Y where 1 <= Y < 2. Define F to be the first	#
-#		seven significant bits of Y plus 2**(-7), i.e.		#
-#		F = 1.xxxxxx1 in base 2 where the six "x" match those	#
-#		of Y. Note that |Y-F| <= 2**(-7).			#
-#									#
-#	Step 3. Define u = (Y-F)/F. Approximate log(1+u) by a		#
-#		polynomial in u, log(1+u) = poly.			#
-#									#
-#	Step 4. Reconstruct						#
-#		log(X) = log( 2**k * Y ) = k*log(2) + log(F) + log(1+u)	#
-#		by k*log(2) + (log(F) + poly). The values of log(F) are	#
-#		calculated beforehand and stored in the program.	#
-#									#
-#	lognp1:								#
-#	Step 1: If |X| < 1/16, approximate log(1+X) by an odd		#
-#		polynomial in u where u = 2X/(2+X). Otherwise, move on	#
-#		to Step 2.						#
-#									#
-#	Step 2: Let 1+X = 2**k * Y, where 1 <= Y < 2. Define F as done	#
-#		in Step 2 of the algorithm for LOGN and compute		#
-#		log(1+X) as k*log(2) + log(F) + poly where poly		#
-#		approximates log(1+u), u = (Y-F)/F.			#
-#									#
-#	Implementation Notes:						#
-#	Note 1. There are 64 different possible values for F, thus 64	#
-#		log(F)'s need to be tabulated. Moreover, the values of	#
-#		1/F are also tabulated so that the division in (Y-F)/F	#
-#		can be performed by a multiplication.			#
-#									#
-#	Note 2. In Step 2 of lognp1, in order to preserved accuracy,	#
-#		the value Y-F has to be calculated carefully when	#
-#		1/2 <= X < 3/2.						#
-#									#
-#	Note 3. To fully exploit the pipeline, polynomials are usually	#
-#		separated into two parts evaluated independently before	#
-#		being added up.						#
-#									#
-#########################################################################
-LOGOF2:
-	long		0x3FFE0000,0xB17217F7,0xD1CF79AC,0x00000000
-
-one:
-	long		0x3F800000
-zero:
-	long		0x00000000
-infty:
-	long		0x7F800000
-negone:
-	long		0xBF800000
-
-LOGA6:
-	long		0x3FC2499A,0xB5E4040B
-LOGA5:
-	long		0xBFC555B5,0x848CB7DB
-
-LOGA4:
-	long		0x3FC99999,0x987D8730
-LOGA3:
-	long		0xBFCFFFFF,0xFF6F7E97
-
-LOGA2:
-	long		0x3FD55555,0x555555A4
-LOGA1:
-	long		0xBFE00000,0x00000008
-
-LOGB5:
-	long		0x3F175496,0xADD7DAD6
-LOGB4:
-	long		0x3F3C71C2,0xFE80C7E0
-
-LOGB3:
-	long		0x3F624924,0x928BCCFF
-LOGB2:
-	long		0x3F899999,0x999995EC
-
-LOGB1:
-	long		0x3FB55555,0x55555555
-TWO:
-	long		0x40000000,0x00000000
-
-LTHOLD:
-	long		0x3f990000,0x80000000,0x00000000,0x00000000
-
-LOGTBL:
-	long		0x3FFE0000,0xFE03F80F,0xE03F80FE,0x00000000
-	long		0x3FF70000,0xFF015358,0x833C47E2,0x00000000
-	long		0x3FFE0000,0xFA232CF2,0x52138AC0,0x00000000
-	long		0x3FF90000,0xBDC8D83E,0xAD88D549,0x00000000
-	long		0x3FFE0000,0xF6603D98,0x0F6603DA,0x00000000
-	long		0x3FFA0000,0x9CF43DCF,0xF5EAFD48,0x00000000
-	long		0x3FFE0000,0xF2B9D648,0x0F2B9D65,0x00000000
-	long		0x3FFA0000,0xDA16EB88,0xCB8DF614,0x00000000
-	long		0x3FFE0000,0xEF2EB71F,0xC4345238,0x00000000
-	long		0x3FFB0000,0x8B29B775,0x1BD70743,0x00000000
-	long		0x3FFE0000,0xEBBDB2A5,0xC1619C8C,0x00000000
-	long		0x3FFB0000,0xA8D839F8,0x30C1FB49,0x00000000
-	long		0x3FFE0000,0xE865AC7B,0x7603A197,0x00000000
-	long		0x3FFB0000,0xC61A2EB1,0x8CD907AD,0x00000000
-	long		0x3FFE0000,0xE525982A,0xF70C880E,0x00000000
-	long		0x3FFB0000,0xE2F2A47A,0xDE3A18AF,0x00000000
-	long		0x3FFE0000,0xE1FC780E,0x1FC780E2,0x00000000
-	long		0x3FFB0000,0xFF64898E,0xDF55D551,0x00000000
-	long		0x3FFE0000,0xDEE95C4C,0xA037BA57,0x00000000
-	long		0x3FFC0000,0x8DB956A9,0x7B3D0148,0x00000000
-	long		0x3FFE0000,0xDBEB61EE,0xD19C5958,0x00000000
-	long		0x3FFC0000,0x9B8FE100,0xF47BA1DE,0x00000000
-	long		0x3FFE0000,0xD901B203,0x6406C80E,0x00000000
-	long		0x3FFC0000,0xA9372F1D,0x0DA1BD17,0x00000000
-	long		0x3FFE0000,0xD62B80D6,0x2B80D62C,0x00000000
-	long		0x3FFC0000,0xB6B07F38,0xCE90E46B,0x00000000
-	long		0x3FFE0000,0xD3680D36,0x80D3680D,0x00000000
-	long		0x3FFC0000,0xC3FD0329,0x06488481,0x00000000
-	long		0x3FFE0000,0xD0B69FCB,0xD2580D0B,0x00000000
-	long		0x3FFC0000,0xD11DE0FF,0x15AB18CA,0x00000000
-	long		0x3FFE0000,0xCE168A77,0x25080CE1,0x00000000
-	long		0x3FFC0000,0xDE1433A1,0x6C66B150,0x00000000
-	long		0x3FFE0000,0xCB8727C0,0x65C393E0,0x00000000
-	long		0x3FFC0000,0xEAE10B5A,0x7DDC8ADD,0x00000000
-	long		0x3FFE0000,0xC907DA4E,0x871146AD,0x00000000
-	long		0x3FFC0000,0xF7856E5E,0xE2C9B291,0x00000000
-	long		0x3FFE0000,0xC6980C69,0x80C6980C,0x00000000
-	long		0x3FFD0000,0x82012CA5,0xA68206D7,0x00000000
-	long		0x3FFE0000,0xC4372F85,0x5D824CA6,0x00000000
-	long		0x3FFD0000,0x882C5FCD,0x7256A8C5,0x00000000
-	long		0x3FFE0000,0xC1E4BBD5,0x95F6E947,0x00000000
-	long		0x3FFD0000,0x8E44C60B,0x4CCFD7DE,0x00000000
-	long		0x3FFE0000,0xBFA02FE8,0x0BFA02FF,0x00000000
-	long		0x3FFD0000,0x944AD09E,0xF4351AF6,0x00000000
-	long		0x3FFE0000,0xBD691047,0x07661AA3,0x00000000
-	long		0x3FFD0000,0x9A3EECD4,0xC3EAA6B2,0x00000000
-	long		0x3FFE0000,0xBB3EE721,0xA54D880C,0x00000000
-	long		0x3FFD0000,0xA0218434,0x353F1DE8,0x00000000
-	long		0x3FFE0000,0xB92143FA,0x36F5E02E,0x00000000
-	long		0x3FFD0000,0xA5F2FCAB,0xBBC506DA,0x00000000
-	long		0x3FFE0000,0xB70FBB5A,0x19BE3659,0x00000000
-	long		0x3FFD0000,0xABB3B8BA,0x2AD362A5,0x00000000
-	long		0x3FFE0000,0xB509E68A,0x9B94821F,0x00000000
-	long		0x3FFD0000,0xB1641795,0xCE3CA97B,0x00000000
-	long		0x3FFE0000,0xB30F6352,0x8917C80B,0x00000000
-	long		0x3FFD0000,0xB7047551,0x5D0F1C61,0x00000000
-	long		0x3FFE0000,0xB11FD3B8,0x0B11FD3C,0x00000000
-	long		0x3FFD0000,0xBC952AFE,0xEA3D13E1,0x00000000
-	long		0x3FFE0000,0xAF3ADDC6,0x80AF3ADE,0x00000000
-	long		0x3FFD0000,0xC2168ED0,0xF458BA4A,0x00000000
-	long		0x3FFE0000,0xAD602B58,0x0AD602B6,0x00000000
-	long		0x3FFD0000,0xC788F439,0xB3163BF1,0x00000000
-	long		0x3FFE0000,0xAB8F69E2,0x8359CD11,0x00000000
-	long		0x3FFD0000,0xCCECAC08,0xBF04565D,0x00000000
-	long		0x3FFE0000,0xA9C84A47,0xA07F5638,0x00000000
-	long		0x3FFD0000,0xD2420487,0x2DD85160,0x00000000
-	long		0x3FFE0000,0xA80A80A8,0x0A80A80B,0x00000000
-	long		0x3FFD0000,0xD7894992,0x3BC3588A,0x00000000
-	long		0x3FFE0000,0xA655C439,0x2D7B73A8,0x00000000
-	long		0x3FFD0000,0xDCC2C4B4,0x9887DACC,0x00000000
-	long		0x3FFE0000,0xA4A9CF1D,0x96833751,0x00000000
-	long		0x3FFD0000,0xE1EEBD3E,0x6D6A6B9E,0x00000000
-	long		0x3FFE0000,0xA3065E3F,0xAE7CD0E0,0x00000000
-	long		0x3FFD0000,0xE70D785C,0x2F9F5BDC,0x00000000
-	long		0x3FFE0000,0xA16B312E,0xA8FC377D,0x00000000
-	long		0x3FFD0000,0xEC1F392C,0x5179F283,0x00000000
-	long		0x3FFE0000,0x9FD809FD,0x809FD80A,0x00000000
-	long		0x3FFD0000,0xF12440D3,0xE36130E6,0x00000000
-	long		0x3FFE0000,0x9E4CAD23,0xDD5F3A20,0x00000000
-	long		0x3FFD0000,0xF61CCE92,0x346600BB,0x00000000
-	long		0x3FFE0000,0x9CC8E160,0xC3FB19B9,0x00000000
-	long		0x3FFD0000,0xFB091FD3,0x8145630A,0x00000000
-	long		0x3FFE0000,0x9B4C6F9E,0xF03A3CAA,0x00000000
-	long		0x3FFD0000,0xFFE97042,0xBFA4C2AD,0x00000000
-	long		0x3FFE0000,0x99D722DA,0xBDE58F06,0x00000000
-	long		0x3FFE0000,0x825EFCED,0x49369330,0x00000000
-	long		0x3FFE0000,0x9868C809,0x868C8098,0x00000000
-	long		0x3FFE0000,0x84C37A7A,0xB9A905C9,0x00000000
-	long		0x3FFE0000,0x97012E02,0x5C04B809,0x00000000
-	long		0x3FFE0000,0x87224C2E,0x8E645FB7,0x00000000
-	long		0x3FFE0000,0x95A02568,0x095A0257,0x00000000
-	long		0x3FFE0000,0x897B8CAC,0x9F7DE298,0x00000000
-	long		0x3FFE0000,0x94458094,0x45809446,0x00000000
-	long		0x3FFE0000,0x8BCF55DE,0xC4CD05FE,0x00000000
-	long		0x3FFE0000,0x92F11384,0x0497889C,0x00000000
-	long		0x3FFE0000,0x8E1DC0FB,0x89E125E5,0x00000000
-	long		0x3FFE0000,0x91A2B3C4,0xD5E6F809,0x00000000
-	long		0x3FFE0000,0x9066E68C,0x955B6C9B,0x00000000
-	long		0x3FFE0000,0x905A3863,0x3E06C43B,0x00000000
-	long		0x3FFE0000,0x92AADE74,0xC7BE59E0,0x00000000
-	long		0x3FFE0000,0x8F1779D9,0xFDC3A219,0x00000000
-	long		0x3FFE0000,0x94E9BFF6,0x15845643,0x00000000
-	long		0x3FFE0000,0x8DDA5202,0x37694809,0x00000000
-	long		0x3FFE0000,0x9723A1B7,0x20134203,0x00000000
-	long		0x3FFE0000,0x8CA29C04,0x6514E023,0x00000000
-	long		0x3FFE0000,0x995899C8,0x90EB8990,0x00000000
-	long		0x3FFE0000,0x8B70344A,0x139BC75A,0x00000000
-	long		0x3FFE0000,0x9B88BDAA,0x3A3DAE2F,0x00000000
-	long		0x3FFE0000,0x8A42F870,0x5669DB46,0x00000000
-	long		0x3FFE0000,0x9DB4224F,0xFFE1157C,0x00000000
-	long		0x3FFE0000,0x891AC73A,0xE9819B50,0x00000000
-	long		0x3FFE0000,0x9FDADC26,0x8B7A12DA,0x00000000
-	long		0x3FFE0000,0x87F78087,0xF78087F8,0x00000000
-	long		0x3FFE0000,0xA1FCFF17,0xCE733BD4,0x00000000
-	long		0x3FFE0000,0x86D90544,0x7A34ACC6,0x00000000
-	long		0x3FFE0000,0xA41A9E8F,0x5446FB9F,0x00000000
-	long		0x3FFE0000,0x85BF3761,0x2CEE3C9B,0x00000000
-	long		0x3FFE0000,0xA633CD7E,0x6771CD8B,0x00000000
-	long		0x3FFE0000,0x84A9F9C8,0x084A9F9D,0x00000000
-	long		0x3FFE0000,0xA8489E60,0x0B435A5E,0x00000000
-	long		0x3FFE0000,0x83993052,0x3FBE3368,0x00000000
-	long		0x3FFE0000,0xAA59233C,0xCCA4BD49,0x00000000
-	long		0x3FFE0000,0x828CBFBE,0xB9A020A3,0x00000000
-	long		0x3FFE0000,0xAC656DAE,0x6BCC4985,0x00000000
-	long		0x3FFE0000,0x81848DA8,0xFAF0D277,0x00000000
-	long		0x3FFE0000,0xAE6D8EE3,0x60BB2468,0x00000000
-	long		0x3FFE0000,0x80808080,0x80808081,0x00000000
-	long		0x3FFE0000,0xB07197A2,0x3C46C654,0x00000000
-
-	set		ADJK,L_SCR1
-
-	set		X,FP_SCR0
-	set		XDCARE,X+2
-	set		XFRAC,X+4
-
-	set		F,FP_SCR1
-	set		FFRAC,F+4
-
-	set		KLOG2,FP_SCR0
-
-	set		SAVEU,FP_SCR0
-
-	global		slogn
-#--ENTRY POINT FOR LOG(X) FOR X FINITE, NON-ZERO, NOT NAN'S
-slogn:
-	fmov.x		(%a0),%fp0		# LOAD INPUT
-	mov.l		&0x00000000,ADJK(%a6)
-
-LOGBGN:
-#--FPCR SAVED AND CLEARED, INPUT IS 2^(ADJK)*FP0, FP0 CONTAINS
-#--A FINITE, NON-ZERO, NORMALIZED NUMBER.
-
-	mov.l		(%a0),%d1
-	mov.w		4(%a0),%d1
-
-	mov.l		(%a0),X(%a6)
-	mov.l		4(%a0),X+4(%a6)
-	mov.l		8(%a0),X+8(%a6)
-
-	cmp.l		%d1,&0			# CHECK IF X IS NEGATIVE
-	blt.w		LOGNEG			# LOG OF NEGATIVE ARGUMENT IS INVALID
-# X IS POSITIVE, CHECK IF X IS NEAR 1
-	cmp.l		%d1,&0x3ffef07d		# IS X < 15/16?
-	blt.b		LOGMAIN			# YES
-	cmp.l		%d1,&0x3fff8841		# IS X > 17/16?
-	ble.w		LOGNEAR1		# NO
-
-LOGMAIN:
-#--THIS SHOULD BE THE USUAL CASE, X NOT VERY CLOSE TO 1
-
-#--X = 2^(K) * Y, 1 <= Y < 2. THUS, Y = 1.XXXXXXXX....XX IN BINARY.
-#--WE DEFINE F = 1.XXXXXX1, I.E. FIRST 7 BITS OF Y AND ATTACH A 1.
-#--THE IDEA IS THAT LOG(X) = K*LOG2 + LOG(Y)
-#--			 = K*LOG2 + LOG(F) + LOG(1 + (Y-F)/F).
-#--NOTE THAT U = (Y-F)/F IS VERY SMALL AND THUS APPROXIMATING
-#--LOG(1+U) CAN BE VERY EFFICIENT.
-#--ALSO NOTE THAT THE VALUE 1/F IS STORED IN A TABLE SO THAT NO
-#--DIVISION IS NEEDED TO CALCULATE (Y-F)/F.
-
-#--GET K, Y, F, AND ADDRESS OF 1/F.
-	asr.l		&8,%d1
-	asr.l		&8,%d1			# SHIFTED 16 BITS, BIASED EXPO. OF X
-	sub.l		&0x3FFF,%d1		# THIS IS K
-	add.l		ADJK(%a6),%d1		# ADJUST K, ORIGINAL INPUT MAY BE  DENORM.
-	lea		LOGTBL(%pc),%a0		# BASE ADDRESS OF 1/F AND LOG(F)
-	fmov.l		%d1,%fp1		# CONVERT K TO FLOATING-POINT FORMAT
-
-#--WHILE THE CONVERSION IS GOING ON, WE GET F AND ADDRESS OF 1/F
-	mov.l		&0x3FFF0000,X(%a6)	# X IS NOW Y, I.E. 2^(-K)*X
-	mov.l		XFRAC(%a6),FFRAC(%a6)
-	and.l		&0xFE000000,FFRAC(%a6)	# FIRST 7 BITS OF Y
-	or.l		&0x01000000,FFRAC(%a6)	# GET F: ATTACH A 1 AT THE EIGHTH BIT
-	mov.l		FFRAC(%a6),%d1	# READY TO GET ADDRESS OF 1/F
-	and.l		&0x7E000000,%d1
-	asr.l		&8,%d1
-	asr.l		&8,%d1
-	asr.l		&4,%d1			# SHIFTED 20, D0 IS THE DISPLACEMENT
-	add.l		%d1,%a0			# A0 IS THE ADDRESS FOR 1/F
-
-	fmov.x		X(%a6),%fp0
-	mov.l		&0x3fff0000,F(%a6)
-	clr.l		F+8(%a6)
-	fsub.x		F(%a6),%fp0		# Y-F
-	fmovm.x		&0xc,-(%sp)		# SAVE FP2-3 WHILE FP0 IS NOT READY
-#--SUMMARY: FP0 IS Y-F, A0 IS ADDRESS OF 1/F, FP1 IS K
-#--REGISTERS SAVED: FPCR, FP1, FP2
-
-LP1CONT1:
-#--AN RE-ENTRY POINT FOR LOGNP1
-	fmul.x		(%a0),%fp0		# FP0 IS U = (Y-F)/F
-	fmul.x		LOGOF2(%pc),%fp1	# GET K*LOG2 WHILE FP0 IS NOT READY
-	fmov.x		%fp0,%fp2
-	fmul.x		%fp2,%fp2		# FP2 IS V=U*U
-	fmov.x		%fp1,KLOG2(%a6)		# PUT K*LOG2 IN MEMEORY, FREE FP1
-
-#--LOG(1+U) IS APPROXIMATED BY
-#--U + V*(A1+U*(A2+U*(A3+U*(A4+U*(A5+U*A6))))) WHICH IS
-#--[U + V*(A1+V*(A3+V*A5))]  +  [U*V*(A2+V*(A4+V*A6))]
-
-	fmov.x		%fp2,%fp3
-	fmov.x		%fp2,%fp1
-
-	fmul.d		LOGA6(%pc),%fp1		# V*A6
-	fmul.d		LOGA5(%pc),%fp2		# V*A5
-
-	fadd.d		LOGA4(%pc),%fp1		# A4+V*A6
-	fadd.d		LOGA3(%pc),%fp2		# A3+V*A5
-
-	fmul.x		%fp3,%fp1		# V*(A4+V*A6)
-	fmul.x		%fp3,%fp2		# V*(A3+V*A5)
-
-	fadd.d		LOGA2(%pc),%fp1		# A2+V*(A4+V*A6)
-	fadd.d		LOGA1(%pc),%fp2		# A1+V*(A3+V*A5)
-
-	fmul.x		%fp3,%fp1		# V*(A2+V*(A4+V*A6))
-	add.l		&16,%a0			# ADDRESS OF LOG(F)
-	fmul.x		%fp3,%fp2		# V*(A1+V*(A3+V*A5))
-
-	fmul.x		%fp0,%fp1		# U*V*(A2+V*(A4+V*A6))
-	fadd.x		%fp2,%fp0		# U+V*(A1+V*(A3+V*A5))
-
-	fadd.x		(%a0),%fp1		# LOG(F)+U*V*(A2+V*(A4+V*A6))
-	fmovm.x		(%sp)+,&0x30		# RESTORE FP2-3
-	fadd.x		%fp1,%fp0		# FP0 IS LOG(F) + LOG(1+U)
-
-	fmov.l		%d0,%fpcr
-	fadd.x		KLOG2(%a6),%fp0		# FINAL ADD
-	bra		t_inx2
-
-
-LOGNEAR1:
-
-# if the input is exactly equal to one, then exit through ld_pzero.
-# if these 2 lines weren't here, the correct answer would be returned
-# but the INEX2 bit would be set.
-	fcmp.b		%fp0,&0x1		# is it equal to one?
-	fbeq.l		ld_pzero		# yes
-
-#--REGISTERS SAVED: FPCR, FP1. FP0 CONTAINS THE INPUT.
-	fmov.x		%fp0,%fp1
-	fsub.s		one(%pc),%fp1		# FP1 IS X-1
-	fadd.s		one(%pc),%fp0		# FP0 IS X+1
-	fadd.x		%fp1,%fp1		# FP1 IS 2(X-1)
-#--LOG(X) = LOG(1+U/2)-LOG(1-U/2) WHICH IS AN ODD POLYNOMIAL
-#--IN U, U = 2(X-1)/(X+1) = FP1/FP0
-
-LP1CONT2:
-#--THIS IS AN RE-ENTRY POINT FOR LOGNP1
-	fdiv.x		%fp0,%fp1		# FP1 IS U
-	fmovm.x		&0xc,-(%sp)		# SAVE FP2-3
-#--REGISTERS SAVED ARE NOW FPCR,FP1,FP2,FP3
-#--LET V=U*U, W=V*V, CALCULATE
-#--U + U*V*(B1 + V*(B2 + V*(B3 + V*(B4 + V*B5)))) BY
-#--U + U*V*(  [B1 + W*(B3 + W*B5)]  +  [V*(B2 + W*B4)]  )
-	fmov.x		%fp1,%fp0
-	fmul.x		%fp0,%fp0		# FP0 IS V
-	fmov.x		%fp1,SAVEU(%a6)		# STORE U IN MEMORY, FREE FP1
-	fmov.x		%fp0,%fp1
-	fmul.x		%fp1,%fp1		# FP1 IS W
-
-	fmov.d		LOGB5(%pc),%fp3
-	fmov.d		LOGB4(%pc),%fp2
-
-	fmul.x		%fp1,%fp3		# W*B5
-	fmul.x		%fp1,%fp2		# W*B4
-
-	fadd.d		LOGB3(%pc),%fp3		# B3+W*B5
-	fadd.d		LOGB2(%pc),%fp2		# B2+W*B4
-
-	fmul.x		%fp3,%fp1		# W*(B3+W*B5), FP3 RELEASED
-
-	fmul.x		%fp0,%fp2		# V*(B2+W*B4)
-
-	fadd.d		LOGB1(%pc),%fp1		# B1+W*(B3+W*B5)
-	fmul.x		SAVEU(%a6),%fp0		# FP0 IS U*V
-
-	fadd.x		%fp2,%fp1		# B1+W*(B3+W*B5) + V*(B2+W*B4), FP2 RELEASED
-	fmovm.x		(%sp)+,&0x30		# FP2-3 RESTORED
-
-	fmul.x		%fp1,%fp0		# U*V*( [B1+W*(B3+W*B5)] + [V*(B2+W*B4)] )
-
-	fmov.l		%d0,%fpcr
-	fadd.x		SAVEU(%a6),%fp0
-	bra		t_inx2
-
-#--REGISTERS SAVED FPCR. LOG(-VE) IS INVALID
-LOGNEG:
-	bra		t_operr
-
-	global		slognd
-slognd:
-#--ENTRY POINT FOR LOG(X) FOR DENORMALIZED INPUT
-
-	mov.l		&-100,ADJK(%a6)		# INPUT = 2^(ADJK) * FP0
-
-#----normalize the input value by left shifting k bits (k to be determined
-#----below), adjusting exponent and storing -k to  ADJK
-#----the value TWOTO100 is no longer needed.
-#----Note that this code assumes the denormalized input is NON-ZERO.
-
-	movm.l		&0x3f00,-(%sp)		# save some registers  {d2-d7}
-	mov.l		(%a0),%d3		# D3 is exponent of smallest norm. #
-	mov.l		4(%a0),%d4
-	mov.l		8(%a0),%d5		# (D4,D5) is (Hi_X,Lo_X)
-	clr.l		%d2			# D2 used for holding K
-
-	tst.l		%d4
-	bne.b		Hi_not0
-
-Hi_0:
-	mov.l		%d5,%d4
-	clr.l		%d5
-	mov.l		&32,%d2
-	clr.l		%d6
-	bfffo		%d4{&0:&32},%d6
-	lsl.l		%d6,%d4
-	add.l		%d6,%d2			# (D3,D4,D5) is normalized
-
-	mov.l		%d3,X(%a6)
-	mov.l		%d4,XFRAC(%a6)
-	mov.l		%d5,XFRAC+4(%a6)
-	neg.l		%d2
-	mov.l		%d2,ADJK(%a6)
-	fmov.x		X(%a6),%fp0
-	movm.l		(%sp)+,&0xfc		# restore registers {d2-d7}
-	lea		X(%a6),%a0
-	bra.w		LOGBGN			# begin regular log(X)
-
-Hi_not0:
-	clr.l		%d6
-	bfffo		%d4{&0:&32},%d6		# find first 1
-	mov.l		%d6,%d2			# get k
-	lsl.l		%d6,%d4
-	mov.l		%d5,%d7			# a copy of D5
-	lsl.l		%d6,%d5
-	neg.l		%d6
-	add.l		&32,%d6
-	lsr.l		%d6,%d7
-	or.l		%d7,%d4			# (D3,D4,D5) normalized
-
-	mov.l		%d3,X(%a6)
-	mov.l		%d4,XFRAC(%a6)
-	mov.l		%d5,XFRAC+4(%a6)
-	neg.l		%d2
-	mov.l		%d2,ADJK(%a6)
-	fmov.x		X(%a6),%fp0
-	movm.l		(%sp)+,&0xfc		# restore registers {d2-d7}
-	lea		X(%a6),%a0
-	bra.w		LOGBGN			# begin regular log(X)
-
-	global		slognp1
-#--ENTRY POINT FOR LOG(1+X) FOR X FINITE, NON-ZERO, NOT NAN'S
-slognp1:
-	fmov.x		(%a0),%fp0		# LOAD INPUT
-	fabs.x		%fp0			# test magnitude
-	fcmp.x		%fp0,LTHOLD(%pc)	# compare with min threshold
-	fbgt.w		LP1REAL			# if greater, continue
-	fmov.l		%d0,%fpcr
-	mov.b		&FMOV_OP,%d1		# last inst is MOVE
-	fmov.x		(%a0),%fp0		# return signed argument
-	bra		t_catch
-
-LP1REAL:
-	fmov.x		(%a0),%fp0		# LOAD INPUT
-	mov.l		&0x00000000,ADJK(%a6)
-	fmov.x		%fp0,%fp1		# FP1 IS INPUT Z
-	fadd.s		one(%pc),%fp0		# X := ROUND(1+Z)
-	fmov.x		%fp0,X(%a6)
-	mov.w		XFRAC(%a6),XDCARE(%a6)
-	mov.l		X(%a6),%d1
-	cmp.l		%d1,&0
-	ble.w		LP1NEG0			# LOG OF ZERO OR -VE
-	cmp.l		%d1,&0x3ffe8000		# IS BOUNDS [1/2,3/2]?
-	blt.w		LOGMAIN
-	cmp.l		%d1,&0x3fffc000
-	bgt.w		LOGMAIN
-#--IF 1+Z > 3/2 OR 1+Z < 1/2, THEN X, WHICH IS ROUNDING 1+Z,
-#--CONTAINS AT LEAST 63 BITS OF INFORMATION OF Z. IN THAT CASE,
-#--SIMPLY INVOKE LOG(X) FOR LOG(1+Z).
-
-LP1NEAR1:
-#--NEXT SEE IF EXP(-1/16) < X < EXP(1/16)
-	cmp.l		%d1,&0x3ffef07d
-	blt.w		LP1CARE
-	cmp.l		%d1,&0x3fff8841
-	bgt.w		LP1CARE
-
-LP1ONE16:
-#--EXP(-1/16) < X < EXP(1/16). LOG(1+Z) = LOG(1+U/2) - LOG(1-U/2)
-#--WHERE U = 2Z/(2+Z) = 2Z/(1+X).
-	fadd.x		%fp1,%fp1		# FP1 IS 2Z
-	fadd.s		one(%pc),%fp0		# FP0 IS 1+X
-#--U = FP1/FP0
-	bra.w		LP1CONT2
-
-LP1CARE:
-#--HERE WE USE THE USUAL TABLE DRIVEN APPROACH. CARE HAS TO BE
-#--TAKEN BECAUSE 1+Z CAN HAVE 67 BITS OF INFORMATION AND WE MUST
-#--PRESERVE ALL THE INFORMATION. BECAUSE 1+Z IS IN [1/2,3/2],
-#--THERE ARE ONLY TWO CASES.
-#--CASE 1: 1+Z < 1, THEN K = -1 AND Y-F = (2-F) + 2Z
-#--CASE 2: 1+Z > 1, THEN K = 0  AND Y-F = (1-F) + Z
-#--ON RETURNING TO LP1CONT1, WE MUST HAVE K IN FP1, ADDRESS OF
-#--(1/F) IN A0, Y-F IN FP0, AND FP2 SAVED.
-
-	mov.l		XFRAC(%a6),FFRAC(%a6)
-	and.l		&0xFE000000,FFRAC(%a6)
-	or.l		&0x01000000,FFRAC(%a6)	# F OBTAINED
-	cmp.l		%d1,&0x3FFF8000		# SEE IF 1+Z > 1
-	bge.b		KISZERO
-
-KISNEG1:
-	fmov.s		TWO(%pc),%fp0
-	mov.l		&0x3fff0000,F(%a6)
-	clr.l		F+8(%a6)
-	fsub.x		F(%a6),%fp0		# 2-F
-	mov.l		FFRAC(%a6),%d1
-	and.l		&0x7E000000,%d1
-	asr.l		&8,%d1
-	asr.l		&8,%d1
-	asr.l		&4,%d1			# D0 CONTAINS DISPLACEMENT FOR 1/F
-	fadd.x		%fp1,%fp1		# GET 2Z
-	fmovm.x		&0xc,-(%sp)		# SAVE FP2  {%fp2/%fp3}
-	fadd.x		%fp1,%fp0		# FP0 IS Y-F = (2-F)+2Z
-	lea		LOGTBL(%pc),%a0		# A0 IS ADDRESS OF 1/F
-	add.l		%d1,%a0
-	fmov.s		negone(%pc),%fp1	# FP1 IS K = -1
-	bra.w		LP1CONT1
-
-KISZERO:
-	fmov.s		one(%pc),%fp0
-	mov.l		&0x3fff0000,F(%a6)
-	clr.l		F+8(%a6)
-	fsub.x		F(%a6),%fp0		# 1-F
-	mov.l		FFRAC(%a6),%d1
-	and.l		&0x7E000000,%d1
-	asr.l		&8,%d1
-	asr.l		&8,%d1
-	asr.l		&4,%d1
-	fadd.x		%fp1,%fp0		# FP0 IS Y-F
-	fmovm.x		&0xc,-(%sp)		# FP2 SAVED {%fp2/%fp3}
-	lea		LOGTBL(%pc),%a0
-	add.l		%d1,%a0			# A0 IS ADDRESS OF 1/F
-	fmov.s		zero(%pc),%fp1		# FP1 IS K = 0
-	bra.w		LP1CONT1
-
-LP1NEG0:
-#--FPCR SAVED. D0 IS X IN COMPACT FORM.
-	cmp.l		%d1,&0
-	blt.b		LP1NEG
-LP1ZERO:
-	fmov.s		negone(%pc),%fp0
-
-	fmov.l		%d0,%fpcr
-	bra		t_dz
-
-LP1NEG:
-	fmov.s		zero(%pc),%fp0
-
-	fmov.l		%d0,%fpcr
-	bra		t_operr
-
-	global		slognp1d
-#--ENTRY POINT FOR LOG(1+Z) FOR DENORMALIZED INPUT
-# Simply return the denorm
-slognp1d:
-	bra		t_extdnrm
-
-#########################################################################
-# satanh():  computes the inverse hyperbolic tangent of a norm input	#
-# satanhd(): computes the inverse hyperbolic tangent of a denorm input	#
-#									#
-# INPUT ***************************************************************	#
-#	a0 = pointer to extended precision input			#
-#	d0 = round precision,mode					#
-#									#
-# OUTPUT **************************************************************	#
-#	fp0 = arctanh(X)						#
-#									#
-# ACCURACY and MONOTONICITY *******************************************	#
-#	The returned result is within 3 ulps in	64 significant bit,	#
-#	i.e. within 0.5001 ulp to 53 bits if the result is subsequently	#
-#	rounded to double precision. The result is provably monotonic	#
-#	in double precision.						#
-#									#
-# ALGORITHM ***********************************************************	#
-#									#
-#	ATANH								#
-#	1. If |X| >= 1, go to 3.					#
-#									#
-#	2. (|X| < 1) Calculate atanh(X) by				#
-#		sgn := sign(X)						#
-#		y := |X|						#
-#		z := 2y/(1-y)						#
-#		atanh(X) := sgn * (1/2) * logp1(z)			#
-#		Exit.							#
-#									#
-#	3. If |X| > 1, go to 5.						#
-#									#
-#	4. (|X| = 1) Generate infinity with an appropriate sign and	#
-#		divide-by-zero by					#
-#		sgn := sign(X)						#
-#		atan(X) := sgn / (+0).					#
-#		Exit.							#
-#									#
-#	5. (|X| > 1) Generate an invalid operation by 0 * infinity.	#
-#		Exit.							#
-#									#
-#########################################################################
-
-	global		satanh
-satanh:
-	mov.l		(%a0),%d1
-	mov.w		4(%a0),%d1
-	and.l		&0x7FFFFFFF,%d1
-	cmp.l		%d1,&0x3FFF8000
-	bge.b		ATANHBIG
-
-#--THIS IS THE USUAL CASE, |X| < 1
-#--Y = |X|, Z = 2Y/(1-Y), ATANH(X) = SIGN(X) * (1/2) * LOG1P(Z).
-
-	fabs.x		(%a0),%fp0		# Y = |X|
-	fmov.x		%fp0,%fp1
-	fneg.x		%fp1			# -Y
-	fadd.x		%fp0,%fp0		# 2Y
-	fadd.s		&0x3F800000,%fp1	# 1-Y
-	fdiv.x		%fp1,%fp0		# 2Y/(1-Y)
-	mov.l		(%a0),%d1
-	and.l		&0x80000000,%d1
-	or.l		&0x3F000000,%d1		# SIGN(X)*HALF
-	mov.l		%d1,-(%sp)
-
-	mov.l		%d0,-(%sp)		# save rnd prec,mode
-	clr.l		%d0			# pass ext prec,RN
-	fmovm.x		&0x01,-(%sp)		# save Z on stack
-	lea		(%sp),%a0		# pass ptr to Z
-	bsr		slognp1			# LOG1P(Z)
-	add.l		&0xc,%sp		# clear Z from stack
-
-	mov.l		(%sp)+,%d0		# fetch old prec,mode
-	fmov.l		%d0,%fpcr		# load it
-	mov.b		&FMUL_OP,%d1		# last inst is MUL
-	fmul.s		(%sp)+,%fp0
-	bra		t_catch
-
-ATANHBIG:
-	fabs.x		(%a0),%fp0		# |X|
-	fcmp.s		%fp0,&0x3F800000
-	fbgt		t_operr
-	bra		t_dz
-
-	global		satanhd
-#--ATANH(X) = X FOR DENORMALIZED X
-satanhd:
-	bra		t_extdnrm
-
-#########################################################################
-# slog10():  computes the base-10 logarithm of a normalized input	#
-# slog10d(): computes the base-10 logarithm of a denormalized input	#
-# slog2():   computes the base-2 logarithm of a normalized input	#
-# slog2d():  computes the base-2 logarithm of a denormalized input	#
-#									#
-# INPUT *************************************************************** #
-#	a0 = pointer to extended precision input			#
-#	d0 = round precision,mode					#
-#									#
-# OUTPUT **************************************************************	#
-#	fp0 = log_10(X) or log_2(X)					#
-#									#
-# ACCURACY and MONOTONICITY *******************************************	#
-#	The returned result is within 1.7 ulps in 64 significant bit,	#
-#	i.e. within 0.5003 ulp to 53 bits if the result is subsequently	#
-#	rounded to double precision. The result is provably monotonic	#
-#	in double precision.						#
-#									#
-# ALGORITHM ***********************************************************	#
-#									#
-#       slog10d:							#
-#									#
-#       Step 0.	If X < 0, create a NaN and raise the invalid operation	#
-#               flag. Otherwise, save FPCR in D1; set FpCR to default.	#
-#       Notes:  Default means round-to-nearest mode, no floating-point	#
-#               traps, and precision control = double extended.		#
-#									#
-#       Step 1. Call slognd to obtain Y = log(X), the natural log of X.	#
-#       Notes:  Even if X is denormalized, log(X) is always normalized.	#
-#									#
-#       Step 2.  Compute log_10(X) = log(X) * (1/log(10)).		#
-#            2.1 Restore the user FPCR					#
-#            2.2 Return ans := Y * INV_L10.				#
-#									#
-#       slog10:								#
-#									#
-#       Step 0. If X < 0, create a NaN and raise the invalid operation	#
-#               flag. Otherwise, save FPCR in D1; set FpCR to default.	#
-#       Notes:  Default means round-to-nearest mode, no floating-point	#
-#               traps, and precision control = double extended.		#
-#									#
-#       Step 1. Call sLogN to obtain Y = log(X), the natural log of X.	#
-#									#
-#       Step 2.   Compute log_10(X) = log(X) * (1/log(10)).		#
-#            2.1  Restore the user FPCR					#
-#            2.2  Return ans := Y * INV_L10.				#
-#									#
-#       sLog2d:								#
-#									#
-#       Step 0. If X < 0, create a NaN and raise the invalid operation	#
-#               flag. Otherwise, save FPCR in D1; set FpCR to default.	#
-#       Notes:  Default means round-to-nearest mode, no floating-point	#
-#               traps, and precision control = double extended.		#
-#									#
-#       Step 1. Call slognd to obtain Y = log(X), the natural log of X.	#
-#       Notes:  Even if X is denormalized, log(X) is always normalized.	#
-#									#
-#       Step 2.   Compute log_10(X) = log(X) * (1/log(2)).		#
-#            2.1  Restore the user FPCR					#
-#            2.2  Return ans := Y * INV_L2.				#
-#									#
-#       sLog2:								#
-#									#
-#       Step 0. If X < 0, create a NaN and raise the invalid operation	#
-#               flag. Otherwise, save FPCR in D1; set FpCR to default.	#
-#       Notes:  Default means round-to-nearest mode, no floating-point	#
-#               traps, and precision control = double extended.		#
-#									#
-#       Step 1. If X is not an integer power of two, i.e., X != 2^k,	#
-#               go to Step 3.						#
-#									#
-#       Step 2.   Return k.						#
-#            2.1  Get integer k, X = 2^k.				#
-#            2.2  Restore the user FPCR.				#
-#            2.3  Return ans := convert-to-double-extended(k).		#
-#									#
-#       Step 3. Call sLogN to obtain Y = log(X), the natural log of X.	#
-#									#
-#       Step 4.   Compute log_2(X) = log(X) * (1/log(2)).		#
-#            4.1  Restore the user FPCR					#
-#            4.2  Return ans := Y * INV_L2.				#
-#									#
-#########################################################################
-
-INV_L10:
-	long		0x3FFD0000,0xDE5BD8A9,0x37287195,0x00000000
-
-INV_L2:
-	long		0x3FFF0000,0xB8AA3B29,0x5C17F0BC,0x00000000
-
-	global		slog10
-#--entry point for Log10(X), X is normalized
-slog10:
-	fmov.b		&0x1,%fp0
-	fcmp.x		%fp0,(%a0)		# if operand == 1,
-	fbeq.l		ld_pzero		# return an EXACT zero
-
-	mov.l		(%a0),%d1
-	blt.w		invalid
-	mov.l		%d0,-(%sp)
-	clr.l		%d0
-	bsr		slogn			# log(X), X normal.
-	fmov.l		(%sp)+,%fpcr
-	fmul.x		INV_L10(%pc),%fp0
-	bra		t_inx2
-
-	global		slog10d
-#--entry point for Log10(X), X is denormalized
-slog10d:
-	mov.l		(%a0),%d1
-	blt.w		invalid
-	mov.l		%d0,-(%sp)
-	clr.l		%d0
-	bsr		slognd			# log(X), X denorm.
-	fmov.l		(%sp)+,%fpcr
-	fmul.x		INV_L10(%pc),%fp0
-	bra		t_minx2
-
-	global		slog2
-#--entry point for Log2(X), X is normalized
-slog2:
-	mov.l		(%a0),%d1
-	blt.w		invalid
-
-	mov.l		8(%a0),%d1
-	bne.b		continue		# X is not 2^k
-
-	mov.l		4(%a0),%d1
-	and.l		&0x7FFFFFFF,%d1
-	bne.b		continue
-
-#--X = 2^k.
-	mov.w		(%a0),%d1
-	and.l		&0x00007FFF,%d1
-	sub.l		&0x3FFF,%d1
-	beq.l		ld_pzero
-	fmov.l		%d0,%fpcr
-	fmov.l		%d1,%fp0
-	bra		t_inx2
-
-continue:
-	mov.l		%d0,-(%sp)
-	clr.l		%d0
-	bsr		slogn			# log(X), X normal.
-	fmov.l		(%sp)+,%fpcr
-	fmul.x		INV_L2(%pc),%fp0
-	bra		t_inx2
-
-invalid:
-	bra		t_operr
-
-	global		slog2d
-#--entry point for Log2(X), X is denormalized
-slog2d:
-	mov.l		(%a0),%d1
-	blt.w		invalid
-	mov.l		%d0,-(%sp)
-	clr.l		%d0
-	bsr		slognd			# log(X), X denorm.
-	fmov.l		(%sp)+,%fpcr
-	fmul.x		INV_L2(%pc),%fp0
-	bra		t_minx2
-
-#########################################################################
-# stwotox():  computes 2**X for a normalized input			#
-# stwotoxd(): computes 2**X for a denormalized input			#
-# stentox():  computes 10**X for a normalized input			#
-# stentoxd(): computes 10**X for a denormalized input			#
-#									#
-# INPUT ***************************************************************	#
-#	a0 = pointer to extended precision input			#
-#	d0 = round precision,mode					#
-#									#
-# OUTPUT **************************************************************	#
-#	fp0 = 2**X or 10**X						#
-#									#
-# ACCURACY and MONOTONICITY *******************************************	#
-#	The returned result is within 2 ulps in 64 significant bit,	#
-#	i.e. within 0.5001 ulp to 53 bits if the result is subsequently	#
-#	rounded to double precision. The result is provably monotonic	#
-#	in double precision.						#
-#									#
-# ALGORITHM ***********************************************************	#
-#									#
-#	twotox								#
-#	1. If |X| > 16480, go to ExpBig.				#
-#									#
-#	2. If |X| < 2**(-70), go to ExpSm.				#
-#									#
-#	3. Decompose X as X = N/64 + r where |r| <= 1/128. Furthermore	#
-#		decompose N as						#
-#		 N = 64(M + M') + j,  j = 0,1,2,...,63.			#
-#									#
-#	4. Overwrite r := r * log2. Then				#
-#		2**X = 2**(M') * 2**(M) * 2**(j/64) * exp(r).		#
-#		Go to expr to compute that expression.			#
-#									#
-#	tentox								#
-#	1. If |X| > 16480*log_10(2) (base 10 log of 2), go to ExpBig.	#
-#									#
-#	2. If |X| < 2**(-70), go to ExpSm.				#
-#									#
-#	3. Set y := X*log_2(10)*64 (base 2 log of 10). Set		#
-#		N := round-to-int(y). Decompose N as			#
-#		 N = 64(M + M') + j,  j = 0,1,2,...,63.			#
-#									#
-#	4. Define r as							#
-#		r := ((X - N*L1)-N*L2) * L10				#
-#		where L1, L2 are the leading and trailing parts of	#
-#		log_10(2)/64 and L10 is the natural log of 10. Then	#
-#		10**X = 2**(M') * 2**(M) * 2**(j/64) * exp(r).		#
-#		Go to expr to compute that expression.			#
-#									#
-#	expr								#
-#	1. Fetch 2**(j/64) from table as Fact1 and Fact2.		#
-#									#
-#	2. Overwrite Fact1 and Fact2 by					#
-#		Fact1 := 2**(M) * Fact1					#
-#		Fact2 := 2**(M) * Fact2					#
-#		Thus Fact1 + Fact2 = 2**(M) * 2**(j/64).		#
-#									#
-#	3. Calculate P where 1 + P approximates exp(r):			#
-#		P = r + r*r*(A1+r*(A2+...+r*A5)).			#
-#									#
-#	4. Let AdjFact := 2**(M'). Return				#
-#		AdjFact * ( Fact1 + ((Fact1*P) + Fact2) ).		#
-#		Exit.							#
-#									#
-#	ExpBig								#
-#	1. Generate overflow by Huge * Huge if X > 0; otherwise,	#
-#	        generate underflow by Tiny * Tiny.			#
-#									#
-#	ExpSm								#
-#	1. Return 1 + X.						#
-#									#
-#########################################################################
-
-L2TEN64:
-	long		0x406A934F,0x0979A371	# 64LOG10/LOG2
-L10TWO1:
-	long		0x3F734413,0x509F8000	# LOG2/64LOG10
-
-L10TWO2:
-	long		0xBFCD0000,0xC0219DC1,0xDA994FD2,0x00000000
-
-LOG10:	long		0x40000000,0x935D8DDD,0xAAA8AC17,0x00000000
-
-LOG2:	long		0x3FFE0000,0xB17217F7,0xD1CF79AC,0x00000000
-
-EXPA5:	long		0x3F56C16D,0x6F7BD0B2
-EXPA4:	long		0x3F811112,0x302C712C
-EXPA3:	long		0x3FA55555,0x55554CC1
-EXPA2:	long		0x3FC55555,0x55554A54
-EXPA1:	long		0x3FE00000,0x00000000,0x00000000,0x00000000
-
-TEXPTBL:
-	long		0x3FFF0000,0x80000000,0x00000000,0x3F738000
-	long		0x3FFF0000,0x8164D1F3,0xBC030773,0x3FBEF7CA
-	long		0x3FFF0000,0x82CD8698,0xAC2BA1D7,0x3FBDF8A9
-	long		0x3FFF0000,0x843A28C3,0xACDE4046,0x3FBCD7C9
-	long		0x3FFF0000,0x85AAC367,0xCC487B15,0xBFBDE8DA
-	long		0x3FFF0000,0x871F6196,0x9E8D1010,0x3FBDE85C
-	long		0x3FFF0000,0x88980E80,0x92DA8527,0x3FBEBBF1
-	long		0x3FFF0000,0x8A14D575,0x496EFD9A,0x3FBB80CA
-	long		0x3FFF0000,0x8B95C1E3,0xEA8BD6E7,0xBFBA8373
-	long		0x3FFF0000,0x8D1ADF5B,0x7E5BA9E6,0xBFBE9670
-	long		0x3FFF0000,0x8EA4398B,0x45CD53C0,0x3FBDB700
-	long		0x3FFF0000,0x9031DC43,0x1466B1DC,0x3FBEEEB0
-	long		0x3FFF0000,0x91C3D373,0xAB11C336,0x3FBBFD6D
-	long		0x3FFF0000,0x935A2B2F,0x13E6E92C,0xBFBDB319
-	long		0x3FFF0000,0x94F4EFA8,0xFEF70961,0x3FBDBA2B
-	long		0x3FFF0000,0x96942D37,0x20185A00,0x3FBE91D5
-	long		0x3FFF0000,0x9837F051,0x8DB8A96F,0x3FBE8D5A
-	long		0x3FFF0000,0x99E04593,0x20B7FA65,0xBFBCDE7B
-	long		0x3FFF0000,0x9B8D39B9,0xD54E5539,0xBFBEBAAF
-	long		0x3FFF0000,0x9D3ED9A7,0x2CFFB751,0xBFBD86DA
-	long		0x3FFF0000,0x9EF53260,0x91A111AE,0xBFBEBEDD
-	long		0x3FFF0000,0xA0B0510F,0xB9714FC2,0x3FBCC96E
-	long		0x3FFF0000,0xA2704303,0x0C496819,0xBFBEC90B
-	long		0x3FFF0000,0xA43515AE,0x09E6809E,0x3FBBD1DB
-	long		0x3FFF0000,0xA5FED6A9,0xB15138EA,0x3FBCE5EB
-	long		0x3FFF0000,0xA7CD93B4,0xE965356A,0xBFBEC274
-	long		0x3FFF0000,0xA9A15AB4,0xEA7C0EF8,0x3FBEA83C
-	long		0x3FFF0000,0xAB7A39B5,0xA93ED337,0x3FBECB00
-	long		0x3FFF0000,0xAD583EEA,0x42A14AC6,0x3FBE9301
-	long		0x3FFF0000,0xAF3B78AD,0x690A4375,0xBFBD8367
-	long		0x3FFF0000,0xB123F581,0xD2AC2590,0xBFBEF05F
-	long		0x3FFF0000,0xB311C412,0xA9112489,0x3FBDFB3C
-	long		0x3FFF0000,0xB504F333,0xF9DE6484,0x3FBEB2FB
-	long		0x3FFF0000,0xB6FD91E3,0x28D17791,0x3FBAE2CB
-	long		0x3FFF0000,0xB8FBAF47,0x62FB9EE9,0x3FBCDC3C
-	long		0x3FFF0000,0xBAFF5AB2,0x133E45FB,0x3FBEE9AA
-	long		0x3FFF0000,0xBD08A39F,0x580C36BF,0xBFBEAEFD
-	long		0x3FFF0000,0xBF1799B6,0x7A731083,0xBFBCBF51
-	long		0x3FFF0000,0xC12C4CCA,0x66709456,0x3FBEF88A
-	long		0x3FFF0000,0xC346CCDA,0x24976407,0x3FBD83B2
-	long		0x3FFF0000,0xC5672A11,0x5506DADD,0x3FBDF8AB
-	long		0x3FFF0000,0xC78D74C8,0xABB9B15D,0xBFBDFB17
-	long		0x3FFF0000,0xC9B9BD86,0x6E2F27A3,0xBFBEFE3C
-	long		0x3FFF0000,0xCBEC14FE,0xF2727C5D,0xBFBBB6F8
-	long		0x3FFF0000,0xCE248C15,0x1F8480E4,0xBFBCEE53
-	long		0x3FFF0000,0xD06333DA,0xEF2B2595,0xBFBDA4AE
-	long		0x3FFF0000,0xD2A81D91,0xF12AE45A,0x3FBC9124
-	long		0x3FFF0000,0xD4F35AAB,0xCFEDFA1F,0x3FBEB243
-	long		0x3FFF0000,0xD744FCCA,0xD69D6AF4,0x3FBDE69A
-	long		0x3FFF0000,0xD99D15C2,0x78AFD7B6,0xBFB8BC61
-	long		0x3FFF0000,0xDBFBB797,0xDAF23755,0x3FBDF610
-	long		0x3FFF0000,0xDE60F482,0x5E0E9124,0xBFBD8BE1
-	long		0x3FFF0000,0xE0CCDEEC,0x2A94E111,0x3FBACB12
-	long		0x3FFF0000,0xE33F8972,0xBE8A5A51,0x3FBB9BFE
-	long		0x3FFF0000,0xE5B906E7,0x7C8348A8,0x3FBCF2F4
-	long		0x3FFF0000,0xE8396A50,0x3C4BDC68,0x3FBEF22F
-	long		0x3FFF0000,0xEAC0C6E7,0xDD24392F,0xBFBDBF4A
-	long		0x3FFF0000,0xED4F301E,0xD9942B84,0x3FBEC01A
-	long		0x3FFF0000,0xEFE4B99B,0xDCDAF5CB,0x3FBE8CAC
-	long		0x3FFF0000,0xF281773C,0x59FFB13A,0xBFBCBB3F
-	long		0x3FFF0000,0xF5257D15,0x2486CC2C,0x3FBEF73A
-	long		0x3FFF0000,0xF7D0DF73,0x0AD13BB9,0xBFB8B795
-	long		0x3FFF0000,0xFA83B2DB,0x722A033A,0x3FBEF84B
-	long		0x3FFF0000,0xFD3E0C0C,0xF486C175,0xBFBEF581
-
-	set		INT,L_SCR1
-
-	set		X,FP_SCR0
-	set		XDCARE,X+2
-	set		XFRAC,X+4
-
-	set		ADJFACT,FP_SCR0
-
-	set		FACT1,FP_SCR0
-	set		FACT1HI,FACT1+4
-	set		FACT1LOW,FACT1+8
-
-	set		FACT2,FP_SCR1
-	set		FACT2HI,FACT2+4
-	set		FACT2LOW,FACT2+8
-
-	global		stwotox
-#--ENTRY POINT FOR 2**(X), HERE X IS FINITE, NON-ZERO, AND NOT NAN'S
-stwotox:
-	fmovm.x		(%a0),&0x80		# LOAD INPUT
-
-	mov.l		(%a0),%d1
-	mov.w		4(%a0),%d1
-	fmov.x		%fp0,X(%a6)
-	and.l		&0x7FFFFFFF,%d1
-
-	cmp.l		%d1,&0x3FB98000		# |X| >= 2**(-70)?
-	bge.b		TWOOK1
-	bra.w		EXPBORS
-
-TWOOK1:
-	cmp.l		%d1,&0x400D80C0		# |X| > 16480?
-	ble.b		TWOMAIN
-	bra.w		EXPBORS
-
-TWOMAIN:
-#--USUAL CASE, 2^(-70) <= |X| <= 16480
-
-	fmov.x		%fp0,%fp1
-	fmul.s		&0x42800000,%fp1	# 64 * X
-	fmov.l		%fp1,INT(%a6)		# N = ROUND-TO-INT(64 X)
-	mov.l		%d2,-(%sp)
-	lea		TEXPTBL(%pc),%a1	# LOAD ADDRESS OF TABLE OF 2^(J/64)
-	fmov.l		INT(%a6),%fp1		# N --> FLOATING FMT
-	mov.l		INT(%a6),%d1
-	mov.l		%d1,%d2
-	and.l		&0x3F,%d1		# D0 IS J
-	asl.l		&4,%d1			# DISPLACEMENT FOR 2^(J/64)
-	add.l		%d1,%a1			# ADDRESS FOR 2^(J/64)
-	asr.l		&6,%d2			# d2 IS L, N = 64L + J
-	mov.l		%d2,%d1
-	asr.l		&1,%d1			# D0 IS M
-	sub.l		%d1,%d2			# d2 IS M', N = 64(M+M') + J
-	add.l		&0x3FFF,%d2
-
-#--SUMMARY: a1 IS ADDRESS FOR THE LEADING PORTION OF 2^(J/64),
-#--D0 IS M WHERE N = 64(M+M') + J. NOTE THAT |M| <= 16140 BY DESIGN.
-#--ADJFACT = 2^(M').
-#--REGISTERS SAVED SO FAR ARE (IN ORDER) FPCR, D0, FP1, a1, AND FP2.
-
-	fmovm.x		&0x0c,-(%sp)		# save fp2/fp3
-
-	fmul.s		&0x3C800000,%fp1	# (1/64)*N
-	mov.l		(%a1)+,FACT1(%a6)
-	mov.l		(%a1)+,FACT1HI(%a6)
-	mov.l		(%a1)+,FACT1LOW(%a6)
-	mov.w		(%a1)+,FACT2(%a6)
-
-	fsub.x		%fp1,%fp0		# X - (1/64)*INT(64 X)
-
-	mov.w		(%a1)+,FACT2HI(%a6)
-	clr.w		FACT2HI+2(%a6)
-	clr.l		FACT2LOW(%a6)
-	add.w		%d1,FACT1(%a6)
-	fmul.x		LOG2(%pc),%fp0		# FP0 IS R
-	add.w		%d1,FACT2(%a6)
-
-	bra.w		expr
-
-EXPBORS:
-#--FPCR, D0 SAVED
-	cmp.l		%d1,&0x3FFF8000
-	bgt.b		TEXPBIG
-
-#--|X| IS SMALL, RETURN 1 + X
-
-	fmov.l		%d0,%fpcr		# restore users round prec,mode
-	fadd.s		&0x3F800000,%fp0	# RETURN 1 + X
-	bra		t_pinx2
-
-TEXPBIG:
-#--|X| IS LARGE, GENERATE OVERFLOW IF X > 0; ELSE GENERATE UNDERFLOW
-#--REGISTERS SAVE SO FAR ARE FPCR AND  D0
-	mov.l		X(%a6),%d1
-	cmp.l		%d1,&0
-	blt.b		EXPNEG
-
-	bra		t_ovfl2			# t_ovfl expects positive value
-
-EXPNEG:
-	bra		t_unfl2			# t_unfl expects positive value
-
-	global		stwotoxd
-stwotoxd:
-#--ENTRY POINT FOR 2**(X) FOR DENORMALIZED ARGUMENT
-
-	fmov.l		%d0,%fpcr		# set user's rounding mode/precision
-	fmov.s		&0x3F800000,%fp0	# RETURN 1 + X
-	mov.l		(%a0),%d1
-	or.l		&0x00800001,%d1
-	fadd.s		%d1,%fp0
-	bra		t_pinx2
-
-	global		stentox
-#--ENTRY POINT FOR 10**(X), HERE X IS FINITE, NON-ZERO, AND NOT NAN'S
-stentox:
-	fmovm.x		(%a0),&0x80		# LOAD INPUT
-
-	mov.l		(%a0),%d1
-	mov.w		4(%a0),%d1
-	fmov.x		%fp0,X(%a6)
-	and.l		&0x7FFFFFFF,%d1
-
-	cmp.l		%d1,&0x3FB98000		# |X| >= 2**(-70)?
-	bge.b		TENOK1
-	bra.w		EXPBORS
-
-TENOK1:
-	cmp.l		%d1,&0x400B9B07		# |X| <= 16480*log2/log10 ?
-	ble.b		TENMAIN
-	bra.w		EXPBORS
-
-TENMAIN:
-#--USUAL CASE, 2^(-70) <= |X| <= 16480 LOG 2 / LOG 10
-
-	fmov.x		%fp0,%fp1
-	fmul.d		L2TEN64(%pc),%fp1	# X*64*LOG10/LOG2
-	fmov.l		%fp1,INT(%a6)		# N=INT(X*64*LOG10/LOG2)
-	mov.l		%d2,-(%sp)
-	lea		TEXPTBL(%pc),%a1	# LOAD ADDRESS OF TABLE OF 2^(J/64)
-	fmov.l		INT(%a6),%fp1		# N --> FLOATING FMT
-	mov.l		INT(%a6),%d1
-	mov.l		%d1,%d2
-	and.l		&0x3F,%d1		# D0 IS J
-	asl.l		&4,%d1			# DISPLACEMENT FOR 2^(J/64)
-	add.l		%d1,%a1			# ADDRESS FOR 2^(J/64)
-	asr.l		&6,%d2			# d2 IS L, N = 64L + J
-	mov.l		%d2,%d1
-	asr.l		&1,%d1			# D0 IS M
-	sub.l		%d1,%d2			# d2 IS M', N = 64(M+M') + J
-	add.l		&0x3FFF,%d2
-
-#--SUMMARY: a1 IS ADDRESS FOR THE LEADING PORTION OF 2^(J/64),
-#--D0 IS M WHERE N = 64(M+M') + J. NOTE THAT |M| <= 16140 BY DESIGN.
-#--ADJFACT = 2^(M').
-#--REGISTERS SAVED SO FAR ARE (IN ORDER) FPCR, D0, FP1, a1, AND FP2.
-	fmovm.x		&0x0c,-(%sp)		# save fp2/fp3
-
-	fmov.x		%fp1,%fp2
-
-	fmul.d		L10TWO1(%pc),%fp1	# N*(LOG2/64LOG10)_LEAD
-	mov.l		(%a1)+,FACT1(%a6)
-
-	fmul.x		L10TWO2(%pc),%fp2	# N*(LOG2/64LOG10)_TRAIL
-
-	mov.l		(%a1)+,FACT1HI(%a6)
-	mov.l		(%a1)+,FACT1LOW(%a6)
-	fsub.x		%fp1,%fp0		# X - N L_LEAD
-	mov.w		(%a1)+,FACT2(%a6)
-
-	fsub.x		%fp2,%fp0		# X - N L_TRAIL
-
-	mov.w		(%a1)+,FACT2HI(%a6)
-	clr.w		FACT2HI+2(%a6)
-	clr.l		FACT2LOW(%a6)
-
-	fmul.x		LOG10(%pc),%fp0		# FP0 IS R
-	add.w		%d1,FACT1(%a6)
-	add.w		%d1,FACT2(%a6)
-
-expr:
-#--FPCR, FP2, FP3 ARE SAVED IN ORDER AS SHOWN.
-#--ADJFACT CONTAINS 2**(M'), FACT1 + FACT2 = 2**(M) * 2**(J/64).
-#--FP0 IS R. THE FOLLOWING CODE COMPUTES
-#--	2**(M'+M) * 2**(J/64) * EXP(R)
-
-	fmov.x		%fp0,%fp1
-	fmul.x		%fp1,%fp1		# FP1 IS S = R*R
-
-	fmov.d		EXPA5(%pc),%fp2		# FP2 IS A5
-	fmov.d		EXPA4(%pc),%fp3		# FP3 IS A4
-
-	fmul.x		%fp1,%fp2		# FP2 IS S*A5
-	fmul.x		%fp1,%fp3		# FP3 IS S*A4
-
-	fadd.d		EXPA3(%pc),%fp2		# FP2 IS A3+S*A5
-	fadd.d		EXPA2(%pc),%fp3		# FP3 IS A2+S*A4
-
-	fmul.x		%fp1,%fp2		# FP2 IS S*(A3+S*A5)
-	fmul.x		%fp1,%fp3		# FP3 IS S*(A2+S*A4)
-
-	fadd.d		EXPA1(%pc),%fp2		# FP2 IS A1+S*(A3+S*A5)
-	fmul.x		%fp0,%fp3		# FP3 IS R*S*(A2+S*A4)
-
-	fmul.x		%fp1,%fp2		# FP2 IS S*(A1+S*(A3+S*A5))
-	fadd.x		%fp3,%fp0		# FP0 IS R+R*S*(A2+S*A4)
-	fadd.x		%fp2,%fp0		# FP0 IS EXP(R) - 1
-
-	fmovm.x		(%sp)+,&0x30		# restore fp2/fp3
-
-#--FINAL RECONSTRUCTION PROCESS
-#--EXP(X) = 2^M*2^(J/64) + 2^M*2^(J/64)*(EXP(R)-1)  -  (1 OR 0)
-
-	fmul.x		FACT1(%a6),%fp0
-	fadd.x		FACT2(%a6),%fp0
-	fadd.x		FACT1(%a6),%fp0
-
-	fmov.l		%d0,%fpcr		# restore users round prec,mode
-	mov.w		%d2,ADJFACT(%a6)	# INSERT EXPONENT
-	mov.l		(%sp)+,%d2
-	mov.l		&0x80000000,ADJFACT+4(%a6)
-	clr.l		ADJFACT+8(%a6)
-	mov.b		&FMUL_OP,%d1		# last inst is MUL
-	fmul.x		ADJFACT(%a6),%fp0	# FINAL ADJUSTMENT
-	bra		t_catch
-
-	global		stentoxd
-stentoxd:
-#--ENTRY POINT FOR 10**(X) FOR DENORMALIZED ARGUMENT
-
-	fmov.l		%d0,%fpcr		# set user's rounding mode/precision
-	fmov.s		&0x3F800000,%fp0	# RETURN 1 + X
-	mov.l		(%a0),%d1
-	or.l		&0x00800001,%d1
-	fadd.s		%d1,%fp0
-	bra		t_pinx2
-
-#########################################################################
-# smovcr(): returns the ROM constant at the offset specified in d1	#
-#	    rounded to the mode and precision specified in d0.		#
-#									#
-# INPUT	***************************************************************	#
-#	d0 = rnd prec,mode						#
-#	d1 = ROM offset							#
-#									#
-# OUTPUT **************************************************************	#
-#	fp0 = the ROM constant rounded to the user's rounding mode,prec	#
-#									#
-#########################################################################
-
-	global		smovcr
-smovcr:
-	mov.l		%d1,-(%sp)		# save rom offset for a sec
-
-	lsr.b		&0x4,%d0		# shift ctrl bits to lo
-	mov.l		%d0,%d1			# make a copy
-	andi.w		&0x3,%d1		# extract rnd mode
-	andi.w		&0xc,%d0		# extract rnd prec
-	swap		%d0			# put rnd prec in hi
-	mov.w		%d1,%d0			# put rnd mode in lo
-
-	mov.l		(%sp)+,%d1		# get rom offset
-
-#
-# check range of offset
-#
-	tst.b		%d1			# if zero, offset is to pi
-	beq.b		pi_tbl			# it is pi
-	cmpi.b		%d1,&0x0a		# check range $01 - $0a
-	ble.b		z_val			# if in this range, return zero
-	cmpi.b		%d1,&0x0e		# check range $0b - $0e
-	ble.b		sm_tbl			# valid constants in this range
-	cmpi.b		%d1,&0x2f		# check range $10 - $2f
-	ble.b		z_val			# if in this range, return zero
-	cmpi.b		%d1,&0x3f		# check range $30 - $3f
-	ble.b		bg_tbl			# valid constants in this range
-
-z_val:
-	bra.l		ld_pzero		# return a zero
-
-#
-# the answer is PI rounded to the proper precision.
-#
-# fetch a pointer to the answer table relating to the proper rounding
-# precision.
-#
-pi_tbl:
-	tst.b		%d0			# is rmode RN?
-	bne.b		pi_not_rn		# no
-pi_rn:
-	lea.l		PIRN(%pc),%a0		# yes; load PI RN table addr
-	bra.w		set_finx
-pi_not_rn:
-	cmpi.b		%d0,&rp_mode		# is rmode RP?
-	beq.b		pi_rp			# yes
-pi_rzrm:
-	lea.l		PIRZRM(%pc),%a0		# no; load PI RZ,RM table addr
-	bra.b		set_finx
-pi_rp:
-	lea.l		PIRP(%pc),%a0		# load PI RP table addr
-	bra.b		set_finx
-
-#
-# the answer is one of:
-#	$0B	log10(2)	(inexact)
-#	$0C	e		(inexact)
-#	$0D	log2(e)		(inexact)
-#	$0E	log10(e)	(exact)
-#
-# fetch a pointer to the answer table relating to the proper rounding
-# precision.
-#
-sm_tbl:
-	subi.b		&0xb,%d1		# make offset in 0-4 range
-	tst.b		%d0			# is rmode RN?
-	bne.b		sm_not_rn		# no
-sm_rn:
-	lea.l		SMALRN(%pc),%a0		# yes; load RN table addr
-sm_tbl_cont:
-	cmpi.b		%d1,&0x2		# is result log10(e)?
-	ble.b		set_finx		# no; answer is inexact
-	bra.b		no_finx			# yes; answer is exact
-sm_not_rn:
-	cmpi.b		%d0,&rp_mode		# is rmode RP?
-	beq.b		sm_rp			# yes
-sm_rzrm:
-	lea.l		SMALRZRM(%pc),%a0	# no; load RZ,RM table addr
-	bra.b		sm_tbl_cont
-sm_rp:
-	lea.l		SMALRP(%pc),%a0		# load RP table addr
-	bra.b		sm_tbl_cont
-
-#
-# the answer is one of:
-#	$30	ln(2)		(inexact)
-#	$31	ln(10)		(inexact)
-#	$32	10^0		(exact)
-#	$33	10^1		(exact)
-#	$34	10^2		(exact)
-#	$35	10^4		(exact)
-#	$36	10^8		(exact)
-#	$37	10^16		(exact)
-#	$38	10^32		(inexact)
-#	$39	10^64		(inexact)
-#	$3A	10^128		(inexact)
-#	$3B	10^256		(inexact)
-#	$3C	10^512		(inexact)
-#	$3D	10^1024		(inexact)
-#	$3E	10^2048		(inexact)
-#	$3F	10^4096		(inexact)
-#
-# fetch a pointer to the answer table relating to the proper rounding
-# precision.
-#
-bg_tbl:
-	subi.b		&0x30,%d1		# make offset in 0-f range
-	tst.b		%d0			# is rmode RN?
-	bne.b		bg_not_rn		# no
-bg_rn:
-	lea.l		BIGRN(%pc),%a0		# yes; load RN table addr
-bg_tbl_cont:
-	cmpi.b		%d1,&0x1		# is offset <= $31?
-	ble.b		set_finx		# yes; answer is inexact
-	cmpi.b		%d1,&0x7		# is $32 <= offset <= $37?
-	ble.b		no_finx			# yes; answer is exact
-	bra.b		set_finx		# no; answer is inexact
-bg_not_rn:
-	cmpi.b		%d0,&rp_mode		# is rmode RP?
-	beq.b		bg_rp			# yes
-bg_rzrm:
-	lea.l		BIGRZRM(%pc),%a0	# no; load RZ,RM table addr
-	bra.b		bg_tbl_cont
-bg_rp:
-	lea.l		BIGRP(%pc),%a0		# load RP table addr
-	bra.b		bg_tbl_cont
-
-# answer is inexact, so set INEX2 and AINEX in the user's FPSR.
-set_finx:
-	ori.l		&inx2a_mask,USER_FPSR(%a6) # set INEX2/AINEX
-no_finx:
-	mulu.w		&0xc,%d1		# offset points into tables
-	swap		%d0			# put rnd prec in lo word
-	tst.b		%d0			# is precision extended?
-
-	bne.b		not_ext			# if xprec, do not call round
-
-# Precision is extended
-	fmovm.x		(%a0,%d1.w),&0x80	# return result in fp0
-	rts
-
-# Precision is single or double
-not_ext:
-	swap		%d0			# rnd prec in upper word
-
-# call round() to round the answer to the proper precision.
-# exponents out of range for single or double DO NOT cause underflow
-# or overflow.
-	mov.w		0x0(%a0,%d1.w),FP_SCR1_EX(%a6) # load first word
-	mov.l		0x4(%a0,%d1.w),FP_SCR1_HI(%a6) # load second word
-	mov.l		0x8(%a0,%d1.w),FP_SCR1_LO(%a6) # load third word
-	mov.l		%d0,%d1
-	clr.l		%d0			# clear g,r,s
-	lea		FP_SCR1(%a6),%a0	# pass ptr to answer
-	clr.w		LOCAL_SGN(%a0)		# sign always positive
-	bsr.l		_round			# round the mantissa
-
-	fmovm.x		(%a0),&0x80		# return rounded result in fp0
-	rts
-
-	align		0x4
-
-PIRN:	long		0x40000000,0xc90fdaa2,0x2168c235	# pi
-PIRZRM:	long		0x40000000,0xc90fdaa2,0x2168c234	# pi
-PIRP:	long		0x40000000,0xc90fdaa2,0x2168c235	# pi
-
-SMALRN:	long		0x3ffd0000,0x9a209a84,0xfbcff798	# log10(2)
-	long		0x40000000,0xadf85458,0xa2bb4a9a	# e
-	long		0x3fff0000,0xb8aa3b29,0x5c17f0bc	# log2(e)
-	long		0x3ffd0000,0xde5bd8a9,0x37287195	# log10(e)
-	long		0x00000000,0x00000000,0x00000000	# 0.0
-
-SMALRZRM:
-	long		0x3ffd0000,0x9a209a84,0xfbcff798	# log10(2)
-	long		0x40000000,0xadf85458,0xa2bb4a9a	# e
-	long		0x3fff0000,0xb8aa3b29,0x5c17f0bb	# log2(e)
-	long		0x3ffd0000,0xde5bd8a9,0x37287195	# log10(e)
-	long		0x00000000,0x00000000,0x00000000	# 0.0
-
-SMALRP:	long		0x3ffd0000,0x9a209a84,0xfbcff799	# log10(2)
-	long		0x40000000,0xadf85458,0xa2bb4a9b	# e
-	long		0x3fff0000,0xb8aa3b29,0x5c17f0bc	# log2(e)
-	long		0x3ffd0000,0xde5bd8a9,0x37287195	# log10(e)
-	long		0x00000000,0x00000000,0x00000000	# 0.0
-
-BIGRN:	long		0x3ffe0000,0xb17217f7,0xd1cf79ac	# ln(2)
-	long		0x40000000,0x935d8ddd,0xaaa8ac17	# ln(10)
-
-	long		0x3fff0000,0x80000000,0x00000000	# 10 ^ 0
-	long		0x40020000,0xA0000000,0x00000000	# 10 ^ 1
-	long		0x40050000,0xC8000000,0x00000000	# 10 ^ 2
-	long		0x400C0000,0x9C400000,0x00000000	# 10 ^ 4
-	long		0x40190000,0xBEBC2000,0x00000000	# 10 ^ 8
-	long		0x40340000,0x8E1BC9BF,0x04000000	# 10 ^ 16
-	long		0x40690000,0x9DC5ADA8,0x2B70B59E	# 10 ^ 32
-	long		0x40D30000,0xC2781F49,0xFFCFA6D5	# 10 ^ 64
-	long		0x41A80000,0x93BA47C9,0x80E98CE0	# 10 ^ 128
-	long		0x43510000,0xAA7EEBFB,0x9DF9DE8E	# 10 ^ 256
-	long		0x46A30000,0xE319A0AE,0xA60E91C7	# 10 ^ 512
-	long		0x4D480000,0xC9767586,0x81750C17	# 10 ^ 1024
-	long		0x5A920000,0x9E8B3B5D,0xC53D5DE5	# 10 ^ 2048
-	long		0x75250000,0xC4605202,0x8A20979B	# 10 ^ 4096
-
-BIGRZRM:
-	long		0x3ffe0000,0xb17217f7,0xd1cf79ab	# ln(2)
-	long		0x40000000,0x935d8ddd,0xaaa8ac16	# ln(10)
-
-	long		0x3fff0000,0x80000000,0x00000000	# 10 ^ 0
-	long		0x40020000,0xA0000000,0x00000000	# 10 ^ 1
-	long		0x40050000,0xC8000000,0x00000000	# 10 ^ 2
-	long		0x400C0000,0x9C400000,0x00000000	# 10 ^ 4
-	long		0x40190000,0xBEBC2000,0x00000000	# 10 ^ 8
-	long		0x40340000,0x8E1BC9BF,0x04000000	# 10 ^ 16
-	long		0x40690000,0x9DC5ADA8,0x2B70B59D	# 10 ^ 32
-	long		0x40D30000,0xC2781F49,0xFFCFA6D5	# 10 ^ 64
-	long		0x41A80000,0x93BA47C9,0x80E98CDF	# 10 ^ 128
-	long		0x43510000,0xAA7EEBFB,0x9DF9DE8D	# 10 ^ 256
-	long		0x46A30000,0xE319A0AE,0xA60E91C6	# 10 ^ 512
-	long		0x4D480000,0xC9767586,0x81750C17	# 10 ^ 1024
-	long		0x5A920000,0x9E8B3B5D,0xC53D5DE4	# 10 ^ 2048
-	long		0x75250000,0xC4605202,0x8A20979A	# 10 ^ 4096
-
-BIGRP:
-	long		0x3ffe0000,0xb17217f7,0xd1cf79ac	# ln(2)
-	long		0x40000000,0x935d8ddd,0xaaa8ac17	# ln(10)
-
-	long		0x3fff0000,0x80000000,0x00000000	# 10 ^ 0
-	long		0x40020000,0xA0000000,0x00000000	# 10 ^ 1
-	long		0x40050000,0xC8000000,0x00000000	# 10 ^ 2
-	long		0x400C0000,0x9C400000,0x00000000	# 10 ^ 4
-	long		0x40190000,0xBEBC2000,0x00000000	# 10 ^ 8
-	long		0x40340000,0x8E1BC9BF,0x04000000	# 10 ^ 16
-	long		0x40690000,0x9DC5ADA8,0x2B70B59E	# 10 ^ 32
-	long		0x40D30000,0xC2781F49,0xFFCFA6D6	# 10 ^ 64
-	long		0x41A80000,0x93BA47C9,0x80E98CE0	# 10 ^ 128
-	long		0x43510000,0xAA7EEBFB,0x9DF9DE8E	# 10 ^ 256
-	long		0x46A30000,0xE319A0AE,0xA60E91C7	# 10 ^ 512
-	long		0x4D480000,0xC9767586,0x81750C18	# 10 ^ 1024
-	long		0x5A920000,0x9E8B3B5D,0xC53D5DE5	# 10 ^ 2048
-	long		0x75250000,0xC4605202,0x8A20979B	# 10 ^ 4096
-
-#########################################################################
-# sscale(): computes the destination operand scaled by the source	#
-#	    operand. If the absoulute value of the source operand is	#
-#	    >= 2^14, an overflow or underflow is returned.		#
-#									#
-# INPUT *************************************************************** #
-#	a0  = pointer to double-extended source operand X		#
-#	a1  = pointer to double-extended destination operand Y		#
-#									#
-# OUTPUT ************************************************************** #
-#	fp0 =  scale(X,Y)						#
-#									#
-#########################################################################
-
-set	SIGN,		L_SCR1
-
-	global		sscale
-sscale:
-	mov.l		%d0,-(%sp)		# store off ctrl bits for now
-
-	mov.w		DST_EX(%a1),%d1		# get dst exponent
-	smi.b		SIGN(%a6)		# use SIGN to hold dst sign
-	andi.l		&0x00007fff,%d1		# strip sign from dst exp
-
-	mov.w		SRC_EX(%a0),%d0		# check src bounds
-	andi.w		&0x7fff,%d0		# clr src sign bit
-	cmpi.w		%d0,&0x3fff		# is src ~ ZERO?
-	blt.w		src_small		# yes
-	cmpi.w		%d0,&0x400c		# no; is src too big?
-	bgt.w		src_out			# yes
-
-#
-# Source is within 2^14 range.
-#
-src_ok:
-	fintrz.x	SRC(%a0),%fp0		# calc int of src
-	fmov.l		%fp0,%d0		# int src to d0
-# don't want any accrued bits from the fintrz showing up later since
-# we may need to read the fpsr for the last fp op in t_catch2().
-	fmov.l		&0x0,%fpsr
-
-	tst.b		DST_HI(%a1)		# is dst denormalized?
-	bmi.b		sok_norm
-
-# the dst is a DENORM. normalize the DENORM and add the adjustment to
-# the src value. then, jump to the norm part of the routine.
-sok_dnrm:
-	mov.l		%d0,-(%sp)		# save src for now
-
-	mov.w		DST_EX(%a1),FP_SCR0_EX(%a6) # make a copy
-	mov.l		DST_HI(%a1),FP_SCR0_HI(%a6)
-	mov.l		DST_LO(%a1),FP_SCR0_LO(%a6)
-
-	lea		FP_SCR0(%a6),%a0	# pass ptr to DENORM
-	bsr.l		norm			# normalize the DENORM
-	neg.l		%d0
-	add.l		(%sp)+,%d0		# add adjustment to src
-
-	fmovm.x		FP_SCR0(%a6),&0x80	# load normalized DENORM
-
-	cmpi.w		%d0,&-0x3fff		# is the shft amt really low?
-	bge.b		sok_norm2		# thank goodness no
-
-# the multiply factor that we're trying to create should be a denorm
-# for the multiply to work. Therefore, we're going to actually do a
-# multiply with a denorm which will cause an unimplemented data type
-# exception to be put into the machine which will be caught and corrected
-# later. we don't do this with the DENORMs above because this method
-# is slower. but, don't fret, I don't see it being used much either.
-	fmov.l		(%sp)+,%fpcr		# restore user fpcr
-	mov.l		&0x80000000,%d1		# load normalized mantissa
-	subi.l		&-0x3fff,%d0		# how many should we shift?
-	neg.l		%d0			# make it positive
-	cmpi.b		%d0,&0x20		# is it > 32?
-	bge.b		sok_dnrm_32		# yes
-	lsr.l		%d0,%d1			# no; bit stays in upper lw
-	clr.l		-(%sp)			# insert zero low mantissa
-	mov.l		%d1,-(%sp)		# insert new high mantissa
-	clr.l		-(%sp)			# make zero exponent
-	bra.b		sok_norm_cont
-sok_dnrm_32:
-	subi.b		&0x20,%d0		# get shift count
-	lsr.l		%d0,%d1			# make low mantissa longword
-	mov.l		%d1,-(%sp)		# insert new low mantissa
-	clr.l		-(%sp)			# insert zero high mantissa
-	clr.l		-(%sp)			# make zero exponent
-	bra.b		sok_norm_cont
-
-# the src will force the dst to a DENORM value or worse. so, let's
-# create an fp multiply that will create the result.
-sok_norm:
-	fmovm.x		DST(%a1),&0x80		# load fp0 with normalized src
-sok_norm2:
-	fmov.l		(%sp)+,%fpcr		# restore user fpcr
-
-	addi.w		&0x3fff,%d0		# turn src amt into exp value
-	swap		%d0			# put exponent in high word
-	clr.l		-(%sp)			# insert new exponent
-	mov.l		&0x80000000,-(%sp)	# insert new high mantissa
-	mov.l		%d0,-(%sp)		# insert new lo mantissa
-
-sok_norm_cont:
-	fmov.l		%fpcr,%d0		# d0 needs fpcr for t_catch2
-	mov.b		&FMUL_OP,%d1		# last inst is MUL
-	fmul.x		(%sp)+,%fp0		# do the multiply
-	bra		t_catch2		# catch any exceptions
-
-#
-# Source is outside of 2^14 range.  Test the sign and branch
-# to the appropriate exception handler.
-#
-src_out:
-	mov.l		(%sp)+,%d0		# restore ctrl bits
-	exg		%a0,%a1			# swap src,dst ptrs
-	tst.b		SRC_EX(%a1)		# is src negative?
-	bmi		t_unfl			# yes; underflow
-	bra		t_ovfl_sc		# no; overflow
-
-#
-# The source input is below 1, so we check for denormalized numbers
-# and set unfl.
-#
-src_small:
-	tst.b		DST_HI(%a1)		# is dst denormalized?
-	bpl.b		ssmall_done		# yes
-
-	mov.l		(%sp)+,%d0
-	fmov.l		%d0,%fpcr		# no; load control bits
-	mov.b		&FMOV_OP,%d1		# last inst is MOVE
-	fmov.x		DST(%a1),%fp0		# simply return dest
-	bra		t_catch2
-ssmall_done:
-	mov.l		(%sp)+,%d0		# load control bits into d1
-	mov.l		%a1,%a0			# pass ptr to dst
-	bra		t_resdnrm
-
-#########################################################################
-# smod(): computes the fp MOD of the input values X,Y.			#
-# srem(): computes the fp (IEEE) REM of the input values X,Y.		#
-#									#
-# INPUT *************************************************************** #
-#	a0 = pointer to extended precision input X			#
-#	a1 = pointer to extended precision input Y			#
-#	d0 = round precision,mode					#
-#									#
-#	The input operands X and Y can be either normalized or		#
-#	denormalized.							#
-#									#
-# OUTPUT ************************************************************** #
-#      fp0 = FREM(X,Y) or FMOD(X,Y)					#
-#									#
-# ALGORITHM *********************************************************** #
-#									#
-#       Step 1.  Save and strip signs of X and Y: signX := sign(X),	#
-#                signY := sign(Y), X := |X|, Y := |Y|,			#
-#                signQ := signX EOR signY. Record whether MOD or REM	#
-#                is requested.						#
-#									#
-#       Step 2.  Set L := expo(X)-expo(Y), k := 0, Q := 0.		#
-#                If (L < 0) then					#
-#                   R := X, go to Step 4.				#
-#                else							#
-#                   R := 2^(-L)X, j := L.				#
-#                endif							#
-#									#
-#       Step 3.  Perform MOD(X,Y)					#
-#            3.1 If R = Y, go to Step 9.				#
-#            3.2 If R > Y, then { R := R - Y, Q := Q + 1}		#
-#            3.3 If j = 0, go to Step 4.				#
-#            3.4 k := k + 1, j := j - 1, Q := 2Q, R := 2R. Go to	#
-#                Step 3.1.						#
-#									#
-#       Step 4.  At this point, R = X - QY = MOD(X,Y). Set		#
-#                Last_Subtract := false (used in Step 7 below). If	#
-#                MOD is requested, go to Step 6.			#
-#									#
-#       Step 5.  R = MOD(X,Y), but REM(X,Y) is requested.		#
-#            5.1 If R < Y/2, then R = MOD(X,Y) = REM(X,Y). Go to	#
-#                Step 6.						#
-#            5.2 If R > Y/2, then { set Last_Subtract := true,		#
-#                Q := Q + 1, Y := signY*Y }. Go to Step 6.		#
-#            5.3 This is the tricky case of R = Y/2. If Q is odd,	#
-#                then { Q := Q + 1, signX := -signX }.			#
-#									#
-#       Step 6.  R := signX*R.						#
-#									#
-#       Step 7.  If Last_Subtract = true, R := R - Y.			#
-#									#
-#       Step 8.  Return signQ, last 7 bits of Q, and R as required.	#
-#									#
-#       Step 9.  At this point, R = 2^(-j)*X - Q Y = Y. Thus,		#
-#                X = 2^(j)*(Q+1)Y. set Q := 2^(j)*(Q+1),		#
-#                R := 0. Return signQ, last 7 bits of Q, and R.		#
-#									#
-#########################################################################
-
-	set		Mod_Flag,L_SCR3
-	set		Sc_Flag,L_SCR3+1
-
-	set		SignY,L_SCR2
-	set		SignX,L_SCR2+2
-	set		SignQ,L_SCR3+2
-
-	set		Y,FP_SCR0
-	set		Y_Hi,Y+4
-	set		Y_Lo,Y+8
-
-	set		R,FP_SCR1
-	set		R_Hi,R+4
-	set		R_Lo,R+8
-
-Scale:
-	long		0x00010000,0x80000000,0x00000000,0x00000000
-
-	global		smod
-smod:
-	clr.b		FPSR_QBYTE(%a6)
-	mov.l		%d0,-(%sp)		# save ctrl bits
-	clr.b		Mod_Flag(%a6)
-	bra.b		Mod_Rem
-
-	global		srem
-srem:
-	clr.b		FPSR_QBYTE(%a6)
-	mov.l		%d0,-(%sp)		# save ctrl bits
-	mov.b		&0x1,Mod_Flag(%a6)
-
-Mod_Rem:
-#..Save sign of X and Y
-	movm.l		&0x3f00,-(%sp)		# save data registers
-	mov.w		SRC_EX(%a0),%d3
-	mov.w		%d3,SignY(%a6)
-	and.l		&0x00007FFF,%d3		# Y := |Y|
-
-#
-	mov.l		SRC_HI(%a0),%d4
-	mov.l		SRC_LO(%a0),%d5		# (D3,D4,D5) is |Y|
-
-	tst.l		%d3
-	bne.b		Y_Normal
-
-	mov.l		&0x00003FFE,%d3		# $3FFD + 1
-	tst.l		%d4
-	bne.b		HiY_not0
-
-HiY_0:
-	mov.l		%d5,%d4
-	clr.l		%d5
-	sub.l		&32,%d3
-	clr.l		%d6
-	bfffo		%d4{&0:&32},%d6
-	lsl.l		%d6,%d4
-	sub.l		%d6,%d3			# (D3,D4,D5) is normalized
-#	                                        ...with bias $7FFD
-	bra.b		Chk_X
-
-HiY_not0:
-	clr.l		%d6
-	bfffo		%d4{&0:&32},%d6
-	sub.l		%d6,%d3
-	lsl.l		%d6,%d4
-	mov.l		%d5,%d7			# a copy of D5
-	lsl.l		%d6,%d5
-	neg.l		%d6
-	add.l		&32,%d6
-	lsr.l		%d6,%d7
-	or.l		%d7,%d4			# (D3,D4,D5) normalized
-#                                       ...with bias $7FFD
-	bra.b		Chk_X
-
-Y_Normal:
-	add.l		&0x00003FFE,%d3		# (D3,D4,D5) normalized
-#                                       ...with bias $7FFD
-
-Chk_X:
-	mov.w		DST_EX(%a1),%d0
-	mov.w		%d0,SignX(%a6)
-	mov.w		SignY(%a6),%d1
-	eor.l		%d0,%d1
-	and.l		&0x00008000,%d1
-	mov.w		%d1,SignQ(%a6)		# sign(Q) obtained
-	and.l		&0x00007FFF,%d0
-	mov.l		DST_HI(%a1),%d1
-	mov.l		DST_LO(%a1),%d2		# (D0,D1,D2) is |X|
-	tst.l		%d0
-	bne.b		X_Normal
-	mov.l		&0x00003FFE,%d0
-	tst.l		%d1
-	bne.b		HiX_not0
-
-HiX_0:
-	mov.l		%d2,%d1
-	clr.l		%d2
-	sub.l		&32,%d0
-	clr.l		%d6
-	bfffo		%d1{&0:&32},%d6
-	lsl.l		%d6,%d1
-	sub.l		%d6,%d0			# (D0,D1,D2) is normalized
-#                                       ...with bias $7FFD
-	bra.b		Init
-
-HiX_not0:
-	clr.l		%d6
-	bfffo		%d1{&0:&32},%d6
-	sub.l		%d6,%d0
-	lsl.l		%d6,%d1
-	mov.l		%d2,%d7			# a copy of D2
-	lsl.l		%d6,%d2
-	neg.l		%d6
-	add.l		&32,%d6
-	lsr.l		%d6,%d7
-	or.l		%d7,%d1			# (D0,D1,D2) normalized
-#                                       ...with bias $7FFD
-	bra.b		Init
-
-X_Normal:
-	add.l		&0x00003FFE,%d0		# (D0,D1,D2) normalized
-#                                       ...with bias $7FFD
-
-Init:
-#
-	mov.l		%d3,L_SCR1(%a6)		# save biased exp(Y)
-	mov.l		%d0,-(%sp)		# save biased exp(X)
-	sub.l		%d3,%d0			# L := expo(X)-expo(Y)
-
-	clr.l		%d6			# D6 := carry <- 0
-	clr.l		%d3			# D3 is Q
-	mov.l		&0,%a1			# A1 is k; j+k=L, Q=0
-
-#..(Carry,D1,D2) is R
-	tst.l		%d0
-	bge.b		Mod_Loop_pre
-
-#..expo(X) < expo(Y). Thus X = mod(X,Y)
-#
-	mov.l		(%sp)+,%d0		# restore d0
-	bra.w		Get_Mod
-
-Mod_Loop_pre:
-	addq.l		&0x4,%sp		# erase exp(X)
-#..At this point  R = 2^(-L)X; Q = 0; k = 0; and  k+j = L
-Mod_Loop:
-	tst.l		%d6			# test carry bit
-	bgt.b		R_GT_Y
-
-#..At this point carry = 0, R = (D1,D2), Y = (D4,D5)
-	cmp.l		%d1,%d4			# compare hi(R) and hi(Y)
-	bne.b		R_NE_Y
-	cmp.l		%d2,%d5			# compare lo(R) and lo(Y)
-	bne.b		R_NE_Y
-
-#..At this point, R = Y
-	bra.w		Rem_is_0
-
-R_NE_Y:
-#..use the borrow of the previous compare
-	bcs.b		R_LT_Y			# borrow is set iff R < Y
-
-R_GT_Y:
-#..If Carry is set, then Y < (Carry,D1,D2) < 2Y. Otherwise, Carry = 0
-#..and Y < (D1,D2) < 2Y. Either way, perform R - Y
-	sub.l		%d5,%d2			# lo(R) - lo(Y)
-	subx.l		%d4,%d1			# hi(R) - hi(Y)
-	clr.l		%d6			# clear carry
-	addq.l		&1,%d3			# Q := Q + 1
-
-R_LT_Y:
-#..At this point, Carry=0, R < Y. R = 2^(k-L)X - QY; k+j = L; j >= 0.
-	tst.l		%d0			# see if j = 0.
-	beq.b		PostLoop
-
-	add.l		%d3,%d3			# Q := 2Q
-	add.l		%d2,%d2			# lo(R) = 2lo(R)
-	roxl.l		&1,%d1			# hi(R) = 2hi(R) + carry
-	scs		%d6			# set Carry if 2(R) overflows
-	addq.l		&1,%a1			# k := k+1
-	subq.l		&1,%d0			# j := j - 1
-#..At this point, R=(Carry,D1,D2) = 2^(k-L)X - QY, j+k=L, j >= 0, R < 2Y.
-
-	bra.b		Mod_Loop
-
-PostLoop:
-#..k = L, j = 0, Carry = 0, R = (D1,D2) = X - QY, R < Y.
-
-#..normalize R.
-	mov.l		L_SCR1(%a6),%d0		# new biased expo of R
-	tst.l		%d1
-	bne.b		HiR_not0
-
-HiR_0:
-	mov.l		%d2,%d1
-	clr.l		%d2
-	sub.l		&32,%d0
-	clr.l		%d6
-	bfffo		%d1{&0:&32},%d6
-	lsl.l		%d6,%d1
-	sub.l		%d6,%d0			# (D0,D1,D2) is normalized
-#                                       ...with bias $7FFD
-	bra.b		Get_Mod
-
-HiR_not0:
-	clr.l		%d6
-	bfffo		%d1{&0:&32},%d6
-	bmi.b		Get_Mod			# already normalized
-	sub.l		%d6,%d0
-	lsl.l		%d6,%d1
-	mov.l		%d2,%d7			# a copy of D2
-	lsl.l		%d6,%d2
-	neg.l		%d6
-	add.l		&32,%d6
-	lsr.l		%d6,%d7
-	or.l		%d7,%d1			# (D0,D1,D2) normalized
-
-#
-Get_Mod:
-	cmp.l		%d0,&0x000041FE
-	bge.b		No_Scale
-Do_Scale:
-	mov.w		%d0,R(%a6)
-	mov.l		%d1,R_Hi(%a6)
-	mov.l		%d2,R_Lo(%a6)
-	mov.l		L_SCR1(%a6),%d6
-	mov.w		%d6,Y(%a6)
-	mov.l		%d4,Y_Hi(%a6)
-	mov.l		%d5,Y_Lo(%a6)
-	fmov.x		R(%a6),%fp0		# no exception
-	mov.b		&1,Sc_Flag(%a6)
-	bra.b		ModOrRem
-No_Scale:
-	mov.l		%d1,R_Hi(%a6)
-	mov.l		%d2,R_Lo(%a6)
-	sub.l		&0x3FFE,%d0
-	mov.w		%d0,R(%a6)
-	mov.l		L_SCR1(%a6),%d6
-	sub.l		&0x3FFE,%d6
-	mov.l		%d6,L_SCR1(%a6)
-	fmov.x		R(%a6),%fp0
-	mov.w		%d6,Y(%a6)
-	mov.l		%d4,Y_Hi(%a6)
-	mov.l		%d5,Y_Lo(%a6)
-	clr.b		Sc_Flag(%a6)
-
-#
-ModOrRem:
-	tst.b		Mod_Flag(%a6)
-	beq.b		Fix_Sign
-
-	mov.l		L_SCR1(%a6),%d6		# new biased expo(Y)
-	subq.l		&1,%d6			# biased expo(Y/2)
-	cmp.l		%d0,%d6
-	blt.b		Fix_Sign
-	bgt.b		Last_Sub
-
-	cmp.l		%d1,%d4
-	bne.b		Not_EQ
-	cmp.l		%d2,%d5
-	bne.b		Not_EQ
-	bra.w		Tie_Case
-
-Not_EQ:
-	bcs.b		Fix_Sign
-
-Last_Sub:
-#
-	fsub.x		Y(%a6),%fp0		# no exceptions
-	addq.l		&1,%d3			# Q := Q + 1
-
-#
-Fix_Sign:
-#..Get sign of X
-	mov.w		SignX(%a6),%d6
-	bge.b		Get_Q
-	fneg.x		%fp0
-
-#..Get Q
-#
-Get_Q:
-	clr.l		%d6
-	mov.w		SignQ(%a6),%d6		# D6 is sign(Q)
-	mov.l		&8,%d7
-	lsr.l		%d7,%d6
-	and.l		&0x0000007F,%d3		# 7 bits of Q
-	or.l		%d6,%d3			# sign and bits of Q
-#	swap		%d3
-#	fmov.l		%fpsr,%d6
-#	and.l		&0xFF00FFFF,%d6
-#	or.l		%d3,%d6
-#	fmov.l		%d6,%fpsr		# put Q in fpsr
-	mov.b		%d3,FPSR_QBYTE(%a6)	# put Q in fpsr
-
-#
-Restore:
-	movm.l		(%sp)+,&0xfc		#  {%d2-%d7}
-	mov.l		(%sp)+,%d0
-	fmov.l		%d0,%fpcr
-	tst.b		Sc_Flag(%a6)
-	beq.b		Finish
-	mov.b		&FMUL_OP,%d1		# last inst is MUL
-	fmul.x		Scale(%pc),%fp0		# may cause underflow
-	bra		t_catch2
-# the '040 package did this apparently to see if the dst operand for the
-# preceding fmul was a denorm. but, it better not have been since the
-# algorithm just got done playing with fp0 and expected no exceptions
-# as a result. trust me...
-#	bra		t_avoid_unsupp		# check for denorm as a
-#						;result of the scaling
-
-Finish:
-	mov.b		&FMOV_OP,%d1		# last inst is MOVE
-	fmov.x		%fp0,%fp0		# capture exceptions & round
-	bra		t_catch2
-
-Rem_is_0:
-#..R = 2^(-j)X - Q Y = Y, thus R = 0 and quotient = 2^j (Q+1)
-	addq.l		&1,%d3
-	cmp.l		%d0,&8			# D0 is j
-	bge.b		Q_Big
-
-	lsl.l		%d0,%d3
-	bra.b		Set_R_0
-
-Q_Big:
-	clr.l		%d3
-
-Set_R_0:
-	fmov.s		&0x00000000,%fp0
-	clr.b		Sc_Flag(%a6)
-	bra.w		Fix_Sign
-
-Tie_Case:
-#..Check parity of Q
-	mov.l		%d3,%d6
-	and.l		&0x00000001,%d6
-	tst.l		%d6
-	beq.w		Fix_Sign		# Q is even
-
-#..Q is odd, Q := Q + 1, signX := -signX
-	addq.l		&1,%d3
-	mov.w		SignX(%a6),%d6
-	eor.l		&0x00008000,%d6
-	mov.w		%d6,SignX(%a6)
-	bra.w		Fix_Sign
-
-qnan:	long		0x7fff0000, 0xffffffff, 0xffffffff
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	t_dz(): Handle DZ exception during transcendental emulation.	#
-#	        Sets N bit according to sign of source operand.		#
-#	t_dz2(): Handle DZ exception during transcendental emulation.	#
-#		 Sets N bit always.					#
-#									#
-# XREF ****************************************************************	#
-#	None								#
-#									#
-# INPUT ***************************************************************	#
-#	a0 = pointer to source operand					#
-#									#
-# OUTPUT **************************************************************	#
-#	fp0 = default result						#
-#									#
-# ALGORITHM ***********************************************************	#
-#	- Store properly signed INF into fp0.				#
-#	- Set FPSR exception status dz bit, ccode inf bit, and		#
-#	  accrued dz bit.						#
-#									#
-#########################################################################
-
-	global		t_dz
-t_dz:
-	tst.b		SRC_EX(%a0)		# no; is src negative?
-	bmi.b		t_dz2			# yes
-
-dz_pinf:
-	fmov.s		&0x7f800000,%fp0	# return +INF in fp0
-	ori.l		&dzinf_mask,USER_FPSR(%a6) # set I/DZ/ADZ
-	rts
-
-	global		t_dz2
-t_dz2:
-	fmov.s		&0xff800000,%fp0	# return -INF in fp0
-	ori.l		&dzinf_mask+neg_mask,USER_FPSR(%a6) # set N/I/DZ/ADZ
-	rts
-
-#################################################################
-# OPERR exception:						#
-#	- set FPSR exception status operr bit, condition code	#
-#	  nan bit; Store default NAN into fp0			#
-#################################################################
-	global		t_operr
-t_operr:
-	ori.l		&opnan_mask,USER_FPSR(%a6) # set NaN/OPERR/AIOP
-	fmovm.x		qnan(%pc),&0x80		# return default NAN in fp0
-	rts
-
-#################################################################
-# Extended DENORM:						#
-#	- For all functions that have a denormalized input and	#
-#	  that f(x)=x, this is the entry point.			#
-#	- we only return the EXOP here if either underflow or	#
-#	  inexact is enabled.					#
-#################################################################
-
-# Entry point for scale w/ extended denorm. The function does
-# NOT set INEX2/AUNFL/AINEX.
-	global		t_resdnrm
-t_resdnrm:
-	ori.l		&unfl_mask,USER_FPSR(%a6) # set UNFL
-	bra.b		xdnrm_con
-
-	global		t_extdnrm
-t_extdnrm:
-	ori.l		&unfinx_mask,USER_FPSR(%a6) # set UNFL/INEX2/AUNFL/AINEX
-
-xdnrm_con:
-	mov.l		%a0,%a1			# make copy of src ptr
-	mov.l		%d0,%d1			# make copy of rnd prec,mode
-	andi.b		&0xc0,%d1		# extended precision?
-	bne.b		xdnrm_sd		# no
-
-# result precision is extended.
-	tst.b		LOCAL_EX(%a0)		# is denorm negative?
-	bpl.b		xdnrm_exit		# no
-
-	bset		&neg_bit,FPSR_CC(%a6)	# yes; set 'N' ccode bit
-	bra.b		xdnrm_exit
-
-# result precision is single or double
-xdnrm_sd:
-	mov.l		%a1,-(%sp)
-	tst.b		LOCAL_EX(%a0)		# is denorm pos or neg?
-	smi.b		%d1			# set d0 accodingly
-	bsr.l		unf_sub
-	mov.l		(%sp)+,%a1
-xdnrm_exit:
-	fmovm.x		(%a0),&0x80		# return default result in fp0
-
-	mov.b		FPCR_ENABLE(%a6),%d0
-	andi.b		&0x0a,%d0		# is UNFL or INEX enabled?
-	bne.b		xdnrm_ena		# yes
-	rts
-
-################
-# unfl enabled #
-################
-# we have a DENORM that needs to be converted into an EXOP.
-# so, normalize the mantissa, add 0x6000 to the new exponent,
-# and return the result in fp1.
-xdnrm_ena:
-	mov.w		LOCAL_EX(%a1),FP_SCR0_EX(%a6)
-	mov.l		LOCAL_HI(%a1),FP_SCR0_HI(%a6)
-	mov.l		LOCAL_LO(%a1),FP_SCR0_LO(%a6)
-
-	lea		FP_SCR0(%a6),%a0
-	bsr.l		norm			# normalize mantissa
-	addi.l		&0x6000,%d0		# add extra bias
-	andi.w		&0x8000,FP_SCR0_EX(%a6)	# keep old sign
-	or.w		%d0,FP_SCR0_EX(%a6)	# insert new exponent
-
-	fmovm.x		FP_SCR0(%a6),&0x40	# return EXOP in fp1
-	rts
-
-#################################################################
-# UNFL exception:						#
-#	- This routine is for cases where even an EXOP isn't	#
-#	  large enough to hold the range of this result.	#
-#	  In such a case, the EXOP equals zero.			#
-#	- Return the default result to the proper precision	#
-#	  with the sign of this result being the same as that	#
-#	  of the src operand.					#
-#	- t_unfl2() is provided to force the result sign to	#
-#	  positive which is the desired result for fetox().	#
-#################################################################
-	global		t_unfl
-t_unfl:
-	ori.l		&unfinx_mask,USER_FPSR(%a6) # set UNFL/INEX2/AUNFL/AINEX
-
-	tst.b		(%a0)			# is result pos or neg?
-	smi.b		%d1			# set d1 accordingly
-	bsr.l		unf_sub			# calc default unfl result
-	fmovm.x		(%a0),&0x80		# return default result in fp0
-
-	fmov.s		&0x00000000,%fp1	# return EXOP in fp1
-	rts
-
-# t_unfl2 ALWAYS tells unf_sub to create a positive result
-	global		t_unfl2
-t_unfl2:
-	ori.l		&unfinx_mask,USER_FPSR(%a6) # set UNFL/INEX2/AUNFL/AINEX
-
-	sf.b		%d1			# set d0 to represent positive
-	bsr.l		unf_sub			# calc default unfl result
-	fmovm.x		(%a0),&0x80		# return default result in fp0
-
-	fmov.s		&0x0000000,%fp1		# return EXOP in fp1
-	rts
-
-#################################################################
-# OVFL exception:						#
-#	- This routine is for cases where even an EXOP isn't	#
-#	  large enough to hold the range of this result.	#
-#	- Return the default result to the proper precision	#
-#	  with the sign of this result being the same as that	#
-#	  of the src operand.					#
-#	- t_ovfl2() is provided to force the result sign to	#
-#	  positive which is the desired result for fcosh().	#
-#	- t_ovfl_sc() is provided for scale() which only sets	#
-#	  the inexact bits if the number is inexact for the	#
-#	  precision indicated.					#
-#################################################################
-
-	global		t_ovfl_sc
-t_ovfl_sc:
-	ori.l		&ovfl_inx_mask,USER_FPSR(%a6) # set OVFL/AOVFL/AINEX
-
-	mov.b		%d0,%d1			# fetch rnd mode/prec
-	andi.b		&0xc0,%d1		# extract rnd prec
-	beq.b		ovfl_work		# prec is extended
-
-	tst.b		LOCAL_HI(%a0)		# is dst a DENORM?
-	bmi.b		ovfl_sc_norm		# no
-
-# dst op is a DENORM. we have to normalize the mantissa to see if the
-# result would be inexact for the given precision. make a copy of the
-# dst so we don't screw up the version passed to us.
-	mov.w		LOCAL_EX(%a0),FP_SCR0_EX(%a6)
-	mov.l		LOCAL_HI(%a0),FP_SCR0_HI(%a6)
-	mov.l		LOCAL_LO(%a0),FP_SCR0_LO(%a6)
-	lea		FP_SCR0(%a6),%a0	# pass ptr to FP_SCR0
-	movm.l		&0xc080,-(%sp)		# save d0-d1/a0
-	bsr.l		norm			# normalize mantissa
-	movm.l		(%sp)+,&0x0103		# restore d0-d1/a0
-
-ovfl_sc_norm:
-	cmpi.b		%d1,&0x40		# is prec dbl?
-	bne.b		ovfl_sc_dbl		# no; sgl
-ovfl_sc_sgl:
-	tst.l		LOCAL_LO(%a0)		# is lo lw of sgl set?
-	bne.b		ovfl_sc_inx		# yes
-	tst.b		3+LOCAL_HI(%a0)		# is lo byte of hi lw set?
-	bne.b		ovfl_sc_inx		# yes
-	bra.b		ovfl_work		# don't set INEX2
-ovfl_sc_dbl:
-	mov.l		LOCAL_LO(%a0),%d1	# are any of lo 11 bits of
-	andi.l		&0x7ff,%d1		# dbl mantissa set?
-	beq.b		ovfl_work		# no; don't set INEX2
-ovfl_sc_inx:
-	ori.l		&inex2_mask,USER_FPSR(%a6) # set INEX2
-	bra.b		ovfl_work		# continue
-
-	global		t_ovfl
-t_ovfl:
-	ori.l		&ovfinx_mask,USER_FPSR(%a6) # set OVFL/INEX2/AOVFL/AINEX
-
-ovfl_work:
-	tst.b		LOCAL_EX(%a0)		# what is the sign?
-	smi.b		%d1			# set d1 accordingly
-	bsr.l		ovf_res			# calc default ovfl result
-	mov.b		%d0,FPSR_CC(%a6)	# insert new ccodes
-	fmovm.x		(%a0),&0x80		# return default result in fp0
-
-	fmov.s		&0x00000000,%fp1	# return EXOP in fp1
-	rts
-
-# t_ovfl2 ALWAYS tells ovf_res to create a positive result
-	global		t_ovfl2
-t_ovfl2:
-	ori.l		&ovfinx_mask,USER_FPSR(%a6) # set OVFL/INEX2/AOVFL/AINEX
-
-	sf.b		%d1			# clear sign flag for positive
-	bsr.l		ovf_res			# calc default ovfl result
-	mov.b		%d0,FPSR_CC(%a6)	# insert new ccodes
-	fmovm.x		(%a0),&0x80		# return default result in fp0
-
-	fmov.s		&0x00000000,%fp1	# return EXOP in fp1
-	rts
-
-#################################################################
-# t_catch():							#
-#	- the last operation of a transcendental emulation	#
-#	  routine may have caused an underflow or overflow.	#
-#	  we find out if this occurred by doing an fsave and	#
-#	  checking the exception bit. if one did occur, then we	#
-#	  jump to fgen_except() which creates the default	#
-#	  result and EXOP for us.				#
-#################################################################
-	global		t_catch
-t_catch:
-
-	fsave		-(%sp)
-	tst.b		0x2(%sp)
-	bmi.b		catch
-	add.l		&0xc,%sp
-
-#################################################################
-# INEX2 exception:						#
-#	- The inex2 and ainex bits are set.			#
-#################################################################
-	global		t_inx2
-t_inx2:
-	fblt.w		t_minx2
-	fbeq.w		inx2_zero
-
-	global		t_pinx2
-t_pinx2:
-	ori.w		&inx2a_mask,2+USER_FPSR(%a6) # set INEX2/AINEX
-	rts
-
-	global		t_minx2
-t_minx2:
-	ori.l		&inx2a_mask+neg_mask,USER_FPSR(%a6) # set N/INEX2/AINEX
-	rts
-
-inx2_zero:
-	mov.b		&z_bmask,FPSR_CC(%a6)
-	ori.w		&inx2a_mask,2+USER_FPSR(%a6) # set INEX2/AINEX
-	rts
-
-# an underflow or overflow exception occurred.
-# we must set INEX/AINEX since the fmul/fdiv/fmov emulation may not!
-catch:
-	ori.w		&inx2a_mask,FPSR_EXCEPT(%a6)
-catch2:
-	bsr.l		fgen_except
-	add.l		&0xc,%sp
-	rts
-
-	global		t_catch2
-t_catch2:
-
-	fsave		-(%sp)
-
-	tst.b		0x2(%sp)
-	bmi.b		catch2
-	add.l		&0xc,%sp
-
-	fmov.l		%fpsr,%d0
-	or.l		%d0,USER_FPSR(%a6)
-
-	rts
-
-#########################################################################
-
-#########################################################################
-# unf_res(): underflow default result calculation for transcendentals	#
-#									#
-# INPUT:								#
-#	d0   : rnd mode,precision					#
-#	d1.b : sign bit of result ('11111111 = (-) ; '00000000 = (+))	#
-# OUTPUT:								#
-#	a0   : points to result (in instruction memory)			#
-#########################################################################
-unf_sub:
-	ori.l		&unfinx_mask,USER_FPSR(%a6)
-
-	andi.w		&0x10,%d1		# keep sign bit in 4th spot
-
-	lsr.b		&0x4,%d0		# shift rnd prec,mode to lo bits
-	andi.b		&0xf,%d0		# strip hi rnd mode bit
-	or.b		%d1,%d0			# concat {sgn,mode,prec}
-
-	mov.l		%d0,%d1			# make a copy
-	lsl.b		&0x1,%d1		# mult index 2 by 2
-
-	mov.b		(tbl_unf_cc.b,%pc,%d0.w*1),FPSR_CC(%a6) # insert ccode bits
-	lea		(tbl_unf_result.b,%pc,%d1.w*8),%a0 # grab result ptr
-	rts
-
-tbl_unf_cc:
-	byte		0x4, 0x4, 0x4, 0x0
-	byte		0x4, 0x4, 0x4, 0x0
-	byte		0x4, 0x4, 0x4, 0x0
-	byte		0x0, 0x0, 0x0, 0x0
-	byte		0x8+0x4, 0x8+0x4, 0x8, 0x8+0x4
-	byte		0x8+0x4, 0x8+0x4, 0x8, 0x8+0x4
-	byte		0x8+0x4, 0x8+0x4, 0x8, 0x8+0x4
-
-tbl_unf_result:
-	long		0x00000000, 0x00000000, 0x00000000, 0x0 # ZERO;ext
-	long		0x00000000, 0x00000000, 0x00000000, 0x0 # ZERO;ext
-	long		0x00000000, 0x00000000, 0x00000000, 0x0 # ZERO;ext
-	long		0x00000000, 0x00000000, 0x00000001, 0x0 # MIN; ext
-
-	long		0x3f810000, 0x00000000, 0x00000000, 0x0 # ZERO;sgl
-	long		0x3f810000, 0x00000000, 0x00000000, 0x0 # ZERO;sgl
-	long		0x3f810000, 0x00000000, 0x00000000, 0x0 # ZERO;sgl
-	long		0x3f810000, 0x00000100, 0x00000000, 0x0 # MIN; sgl
-
-	long		0x3c010000, 0x00000000, 0x00000000, 0x0 # ZERO;dbl
-	long		0x3c010000, 0x00000000, 0x00000000, 0x0 # ZER0;dbl
-	long		0x3c010000, 0x00000000, 0x00000000, 0x0 # ZERO;dbl
-	long		0x3c010000, 0x00000000, 0x00000800, 0x0 # MIN; dbl
-
-	long		0x0,0x0,0x0,0x0
-	long		0x0,0x0,0x0,0x0
-	long		0x0,0x0,0x0,0x0
-	long		0x0,0x0,0x0,0x0
-
-	long		0x80000000, 0x00000000, 0x00000000, 0x0 # ZERO;ext
-	long		0x80000000, 0x00000000, 0x00000000, 0x0 # ZERO;ext
-	long		0x80000000, 0x00000000, 0x00000001, 0x0 # MIN; ext
-	long		0x80000000, 0x00000000, 0x00000000, 0x0 # ZERO;ext
-
-	long		0xbf810000, 0x00000000, 0x00000000, 0x0 # ZERO;sgl
-	long		0xbf810000, 0x00000000, 0x00000000, 0x0 # ZERO;sgl
-	long		0xbf810000, 0x00000100, 0x00000000, 0x0 # MIN; sgl
-	long		0xbf810000, 0x00000000, 0x00000000, 0x0 # ZERO;sgl
-
-	long		0xbc010000, 0x00000000, 0x00000000, 0x0 # ZERO;dbl
-	long		0xbc010000, 0x00000000, 0x00000000, 0x0 # ZERO;dbl
-	long		0xbc010000, 0x00000000, 0x00000800, 0x0 # MIN; dbl
-	long		0xbc010000, 0x00000000, 0x00000000, 0x0 # ZERO;dbl
-
-############################################################
-
-#########################################################################
-# src_zero(): Return signed zero according to sign of src operand.	#
-#########################################################################
-	global		src_zero
-src_zero:
-	tst.b		SRC_EX(%a0)		# get sign of src operand
-	bmi.b		ld_mzero		# if neg, load neg zero
-
-#
-# ld_pzero(): return a positive zero.
-#
-	global		ld_pzero
-ld_pzero:
-	fmov.s		&0x00000000,%fp0	# load +0
-	mov.b		&z_bmask,FPSR_CC(%a6)	# set 'Z' ccode bit
-	rts
-
-# ld_mzero(): return a negative zero.
-	global		ld_mzero
-ld_mzero:
-	fmov.s		&0x80000000,%fp0	# load -0
-	mov.b		&neg_bmask+z_bmask,FPSR_CC(%a6) # set 'N','Z' ccode bits
-	rts
-
-#########################################################################
-# dst_zero(): Return signed zero according to sign of dst operand.	#
-#########################################################################
-	global		dst_zero
-dst_zero:
-	tst.b		DST_EX(%a1)		# get sign of dst operand
-	bmi.b		ld_mzero		# if neg, load neg zero
-	bra.b		ld_pzero		# load positive zero
-
-#########################################################################
-# src_inf(): Return signed inf according to sign of src operand.	#
-#########################################################################
-	global		src_inf
-src_inf:
-	tst.b		SRC_EX(%a0)		# get sign of src operand
-	bmi.b		ld_minf			# if negative branch
-
-#
-# ld_pinf(): return a positive infinity.
-#
-	global		ld_pinf
-ld_pinf:
-	fmov.s		&0x7f800000,%fp0	# load +INF
-	mov.b		&inf_bmask,FPSR_CC(%a6)	# set 'INF' ccode bit
-	rts
-
-#
-# ld_minf():return a negative infinity.
-#
-	global		ld_minf
-ld_minf:
-	fmov.s		&0xff800000,%fp0	# load -INF
-	mov.b		&neg_bmask+inf_bmask,FPSR_CC(%a6) # set 'N','I' ccode bits
-	rts
-
-#########################################################################
-# dst_inf(): Return signed inf according to sign of dst operand.	#
-#########################################################################
-	global		dst_inf
-dst_inf:
-	tst.b		DST_EX(%a1)		# get sign of dst operand
-	bmi.b		ld_minf			# if negative branch
-	bra.b		ld_pinf
-
-	global		szr_inf
-#################################################################
-# szr_inf(): Return +ZERO for a negative src operand or		#
-#	            +INF for a positive src operand.		#
-#	     Routine used for fetox, ftwotox, and ftentox.	#
-#################################################################
-szr_inf:
-	tst.b		SRC_EX(%a0)		# check sign of source
-	bmi.b		ld_pzero
-	bra.b		ld_pinf
-
-#########################################################################
-# sopr_inf(): Return +INF for a positive src operand or			#
-#	      jump to operand error routine for a negative src operand.	#
-#	      Routine used for flogn, flognp1, flog10, and flog2.	#
-#########################################################################
-	global		sopr_inf
-sopr_inf:
-	tst.b		SRC_EX(%a0)		# check sign of source
-	bmi.w		t_operr
-	bra.b		ld_pinf
-
-#################################################################
-# setoxm1i(): Return minus one for a negative src operand or	#
-#	      positive infinity for a positive src operand.	#
-#	      Routine used for fetoxm1.				#
-#################################################################
-	global		setoxm1i
-setoxm1i:
-	tst.b		SRC_EX(%a0)		# check sign of source
-	bmi.b		ld_mone
-	bra.b		ld_pinf
-
-#########################################################################
-# src_one(): Return signed one according to sign of src operand.	#
-#########################################################################
-	global		src_one
-src_one:
-	tst.b		SRC_EX(%a0)		# check sign of source
-	bmi.b		ld_mone
-
-#
-# ld_pone(): return positive one.
-#
-	global		ld_pone
-ld_pone:
-	fmov.s		&0x3f800000,%fp0	# load +1
-	clr.b		FPSR_CC(%a6)
-	rts
-
-#
-# ld_mone(): return negative one.
-#
-	global		ld_mone
-ld_mone:
-	fmov.s		&0xbf800000,%fp0	# load -1
-	mov.b		&neg_bmask,FPSR_CC(%a6)	# set 'N' ccode bit
-	rts
-
-ppiby2:	long		0x3fff0000, 0xc90fdaa2, 0x2168c235
-mpiby2:	long		0xbfff0000, 0xc90fdaa2, 0x2168c235
-
-#################################################################
-# spi_2(): Return signed PI/2 according to sign of src operand.	#
-#################################################################
-	global		spi_2
-spi_2:
-	tst.b		SRC_EX(%a0)		# check sign of source
-	bmi.b		ld_mpi2
-
-#
-# ld_ppi2(): return positive PI/2.
-#
-	global		ld_ppi2
-ld_ppi2:
-	fmov.l		%d0,%fpcr
-	fmov.x		ppiby2(%pc),%fp0	# load +pi/2
-	bra.w		t_pinx2			# set INEX2
-
-#
-# ld_mpi2(): return negative PI/2.
-#
-	global		ld_mpi2
-ld_mpi2:
-	fmov.l		%d0,%fpcr
-	fmov.x		mpiby2(%pc),%fp0	# load -pi/2
-	bra.w		t_minx2			# set INEX2
-
-####################################################
-# The following routines give support for fsincos. #
-####################################################
-
-#
-# ssincosz(): When the src operand is ZERO, store a one in the
-#	      cosine register and return a ZERO in fp0 w/ the same sign
-#	      as the src operand.
-#
-	global		ssincosz
-ssincosz:
-	fmov.s		&0x3f800000,%fp1
-	tst.b		SRC_EX(%a0)		# test sign
-	bpl.b		sincoszp
-	fmov.s		&0x80000000,%fp0	# return sin result in fp0
-	mov.b		&z_bmask+neg_bmask,FPSR_CC(%a6)
-	bra.b		sto_cos			# store cosine result
-sincoszp:
-	fmov.s		&0x00000000,%fp0	# return sin result in fp0
-	mov.b		&z_bmask,FPSR_CC(%a6)
-	bra.b		sto_cos			# store cosine result
-
-#
-# ssincosi(): When the src operand is INF, store a QNAN in the cosine
-#	      register and jump to the operand error routine for negative
-#	      src operands.
-#
-	global		ssincosi
-ssincosi:
-	fmov.x		qnan(%pc),%fp1		# load NAN
-	bsr.l		sto_cos			# store cosine result
-	bra.w		t_operr
-
-#
-# ssincosqnan(): When the src operand is a QNAN, store the QNAN in the cosine
-#		 register and branch to the src QNAN routine.
-#
-	global		ssincosqnan
-ssincosqnan:
-	fmov.x		LOCAL_EX(%a0),%fp1
-	bsr.l		sto_cos
-	bra.w		src_qnan
-
-#
-# ssincossnan(): When the src operand is an SNAN, store the SNAN w/ the SNAN bit set
-#		 in the cosine register and branch to the src SNAN routine.
-#
-	global		ssincossnan
-ssincossnan:
-	fmov.x		LOCAL_EX(%a0),%fp1
-	bsr.l		sto_cos
-	bra.w		src_snan
-
-########################################################################
-
-#########################################################################
-# sto_cos(): store fp1 to the fpreg designated by the CMDREG dst field.	#
-#	     fp1 holds the result of the cosine portion of ssincos().	#
-#	     the value in fp1 will not take any exceptions when moved.	#
-# INPUT:								#
-#	fp1 : fp value to store						#
-# MODIFIED:								#
-#	d0								#
-#########################################################################
-	global		sto_cos
-sto_cos:
-	mov.b		1+EXC_CMDREG(%a6),%d0
-	andi.w		&0x7,%d0
-	mov.w		(tbl_sto_cos.b,%pc,%d0.w*2),%d0
-	jmp		(tbl_sto_cos.b,%pc,%d0.w*1)
-
-tbl_sto_cos:
-	short		sto_cos_0 - tbl_sto_cos
-	short		sto_cos_1 - tbl_sto_cos
-	short		sto_cos_2 - tbl_sto_cos
-	short		sto_cos_3 - tbl_sto_cos
-	short		sto_cos_4 - tbl_sto_cos
-	short		sto_cos_5 - tbl_sto_cos
-	short		sto_cos_6 - tbl_sto_cos
-	short		sto_cos_7 - tbl_sto_cos
-
-sto_cos_0:
-	fmovm.x		&0x40,EXC_FP0(%a6)
-	rts
-sto_cos_1:
-	fmovm.x		&0x40,EXC_FP1(%a6)
-	rts
-sto_cos_2:
-	fmov.x		%fp1,%fp2
-	rts
-sto_cos_3:
-	fmov.x		%fp1,%fp3
-	rts
-sto_cos_4:
-	fmov.x		%fp1,%fp4
-	rts
-sto_cos_5:
-	fmov.x		%fp1,%fp5
-	rts
-sto_cos_6:
-	fmov.x		%fp1,%fp6
-	rts
-sto_cos_7:
-	fmov.x		%fp1,%fp7
-	rts
-
-##################################################################
-	global		smod_sdnrm
-	global		smod_snorm
-smod_sdnrm:
-smod_snorm:
-	mov.b		DTAG(%a6),%d1
-	beq.l		smod
-	cmpi.b		%d1,&ZERO
-	beq.w		smod_zro
-	cmpi.b		%d1,&INF
-	beq.l		t_operr
-	cmpi.b		%d1,&DENORM
-	beq.l		smod
-	cmpi.b		%d1,&SNAN
-	beq.l		dst_snan
-	bra.l		dst_qnan
-
-	global		smod_szero
-smod_szero:
-	mov.b		DTAG(%a6),%d1
-	beq.l		t_operr
-	cmpi.b		%d1,&ZERO
-	beq.l		t_operr
-	cmpi.b		%d1,&INF
-	beq.l		t_operr
-	cmpi.b		%d1,&DENORM
-	beq.l		t_operr
-	cmpi.b		%d1,&QNAN
-	beq.l		dst_qnan
-	bra.l		dst_snan
-
-	global		smod_sinf
-smod_sinf:
-	mov.b		DTAG(%a6),%d1
-	beq.l		smod_fpn
-	cmpi.b		%d1,&ZERO
-	beq.l		smod_zro
-	cmpi.b		%d1,&INF
-	beq.l		t_operr
-	cmpi.b		%d1,&DENORM
-	beq.l		smod_fpn
-	cmpi.b		%d1,&QNAN
-	beq.l		dst_qnan
-	bra.l		dst_snan
-
-smod_zro:
-srem_zro:
-	mov.b		SRC_EX(%a0),%d1		# get src sign
-	mov.b		DST_EX(%a1),%d0		# get dst sign
-	eor.b		%d0,%d1			# get qbyte sign
-	andi.b		&0x80,%d1
-	mov.b		%d1,FPSR_QBYTE(%a6)
-	tst.b		%d0
-	bpl.w		ld_pzero
-	bra.w		ld_mzero
-
-smod_fpn:
-srem_fpn:
-	clr.b		FPSR_QBYTE(%a6)
-	mov.l		%d0,-(%sp)
-	mov.b		SRC_EX(%a0),%d1		# get src sign
-	mov.b		DST_EX(%a1),%d0		# get dst sign
-	eor.b		%d0,%d1			# get qbyte sign
-	andi.b		&0x80,%d1
-	mov.b		%d1,FPSR_QBYTE(%a6)
-	cmpi.b		DTAG(%a6),&DENORM
-	bne.b		smod_nrm
-	lea		DST(%a1),%a0
-	mov.l		(%sp)+,%d0
-	bra		t_resdnrm
-smod_nrm:
-	fmov.l		(%sp)+,%fpcr
-	fmov.x		DST(%a1),%fp0
-	tst.b		DST_EX(%a1)
-	bmi.b		smod_nrm_neg
-	rts
-
-smod_nrm_neg:
-	mov.b		&neg_bmask,FPSR_CC(%a6)	# set 'N' ccode
-	rts
-
-#########################################################################
-	global		srem_snorm
-	global		srem_sdnrm
-srem_sdnrm:
-srem_snorm:
-	mov.b		DTAG(%a6),%d1
-	beq.l		srem
-	cmpi.b		%d1,&ZERO
-	beq.w		srem_zro
-	cmpi.b		%d1,&INF
-	beq.l		t_operr
-	cmpi.b		%d1,&DENORM
-	beq.l		srem
-	cmpi.b		%d1,&QNAN
-	beq.l		dst_qnan
-	bra.l		dst_snan
-
-	global		srem_szero
-srem_szero:
-	mov.b		DTAG(%a6),%d1
-	beq.l		t_operr
-	cmpi.b		%d1,&ZERO
-	beq.l		t_operr
-	cmpi.b		%d1,&INF
-	beq.l		t_operr
-	cmpi.b		%d1,&DENORM
-	beq.l		t_operr
-	cmpi.b		%d1,&QNAN
-	beq.l		dst_qnan
-	bra.l		dst_snan
-
-	global		srem_sinf
-srem_sinf:
-	mov.b		DTAG(%a6),%d1
-	beq.w		srem_fpn
-	cmpi.b		%d1,&ZERO
-	beq.w		srem_zro
-	cmpi.b		%d1,&INF
-	beq.l		t_operr
-	cmpi.b		%d1,&DENORM
-	beq.l		srem_fpn
-	cmpi.b		%d1,&QNAN
-	beq.l		dst_qnan
-	bra.l		dst_snan
-
-#########################################################################
-	global		sscale_snorm
-	global		sscale_sdnrm
-sscale_snorm:
-sscale_sdnrm:
-	mov.b		DTAG(%a6),%d1
-	beq.l		sscale
-	cmpi.b		%d1,&ZERO
-	beq.l		dst_zero
-	cmpi.b		%d1,&INF
-	beq.l		dst_inf
-	cmpi.b		%d1,&DENORM
-	beq.l		sscale
-	cmpi.b		%d1,&QNAN
-	beq.l		dst_qnan
-	bra.l		dst_snan
-
-	global		sscale_szero
-sscale_szero:
-	mov.b		DTAG(%a6),%d1
-	beq.l		sscale
-	cmpi.b		%d1,&ZERO
-	beq.l		dst_zero
-	cmpi.b		%d1,&INF
-	beq.l		dst_inf
-	cmpi.b		%d1,&DENORM
-	beq.l		sscale
-	cmpi.b		%d1,&QNAN
-	beq.l		dst_qnan
-	bra.l		dst_snan
-
-	global		sscale_sinf
-sscale_sinf:
-	mov.b		DTAG(%a6),%d1
-	beq.l		t_operr
-	cmpi.b		%d1,&QNAN
-	beq.l		dst_qnan
-	cmpi.b		%d1,&SNAN
-	beq.l		dst_snan
-	bra.l		t_operr
-
-########################################################################
-
-#
-# sop_sqnan(): The src op for frem/fmod/fscale was a QNAN.
-#
-	global		sop_sqnan
-sop_sqnan:
-	mov.b		DTAG(%a6),%d1
-	cmpi.b		%d1,&QNAN
-	beq.b		dst_qnan
-	cmpi.b		%d1,&SNAN
-	beq.b		dst_snan
-	bra.b		src_qnan
-
-#
-# sop_ssnan(): The src op for frem/fmod/fscale was an SNAN.
-#
-	global		sop_ssnan
-sop_ssnan:
-	mov.b		DTAG(%a6),%d1
-	cmpi.b		%d1,&QNAN
-	beq.b		dst_qnan_src_snan
-	cmpi.b		%d1,&SNAN
-	beq.b		dst_snan
-	bra.b		src_snan
-
-dst_qnan_src_snan:
-	ori.l		&snaniop_mask,USER_FPSR(%a6) # set NAN/SNAN/AIOP
-	bra.b		dst_qnan
-
-#
-# dst_qnan(): Return the dst SNAN w/ the SNAN bit set.
-#
-	global		dst_snan
-dst_snan:
-	fmov.x		DST(%a1),%fp0		# the fmove sets the SNAN bit
-	fmov.l		%fpsr,%d0		# catch resulting status
-	or.l		%d0,USER_FPSR(%a6)	# store status
-	rts
-
-#
-# dst_qnan(): Return the dst QNAN.
-#
-	global		dst_qnan
-dst_qnan:
-	fmov.x		DST(%a1),%fp0		# return the non-signalling nan
-	tst.b		DST_EX(%a1)		# set ccodes according to QNAN sign
-	bmi.b		dst_qnan_m
-dst_qnan_p:
-	mov.b		&nan_bmask,FPSR_CC(%a6)
-	rts
-dst_qnan_m:
-	mov.b		&neg_bmask+nan_bmask,FPSR_CC(%a6)
-	rts
-
-#
-# src_snan(): Return the src SNAN w/ the SNAN bit set.
-#
-	global		src_snan
-src_snan:
-	fmov.x		SRC(%a0),%fp0		# the fmove sets the SNAN bit
-	fmov.l		%fpsr,%d0		# catch resulting status
-	or.l		%d0,USER_FPSR(%a6)	# store status
-	rts
-
-#
-# src_qnan(): Return the src QNAN.
-#
-	global		src_qnan
-src_qnan:
-	fmov.x		SRC(%a0),%fp0		# return the non-signalling nan
-	tst.b		SRC_EX(%a0)		# set ccodes according to QNAN sign
-	bmi.b		dst_qnan_m
-src_qnan_p:
-	mov.b		&nan_bmask,FPSR_CC(%a6)
-	rts
-src_qnan_m:
-	mov.b		&neg_bmask+nan_bmask,FPSR_CC(%a6)
-	rts
-
-#
-# fkern2.s:
-#	These entry points are used by the exception handler
-# routines where an instruction is selected by an index into
-# a large jump table corresponding to a given instruction which
-# has been decoded. Flow continues here where we now decode
-# further accoding to the source operand type.
-#
-
-	global		fsinh
-fsinh:
-	mov.b		STAG(%a6),%d1
-	beq.l		ssinh
-	cmpi.b		%d1,&ZERO
-	beq.l		src_zero
-	cmpi.b		%d1,&INF
-	beq.l		src_inf
-	cmpi.b		%d1,&DENORM
-	beq.l		ssinhd
-	cmpi.b		%d1,&QNAN
-	beq.l		src_qnan
-	bra.l		src_snan
-
-	global		flognp1
-flognp1:
-	mov.b		STAG(%a6),%d1
-	beq.l		slognp1
-	cmpi.b		%d1,&ZERO
-	beq.l		src_zero
-	cmpi.b		%d1,&INF
-	beq.l		sopr_inf
-	cmpi.b		%d1,&DENORM
-	beq.l		slognp1d
-	cmpi.b		%d1,&QNAN
-	beq.l		src_qnan
-	bra.l		src_snan
-
-	global		fetoxm1
-fetoxm1:
-	mov.b		STAG(%a6),%d1
-	beq.l		setoxm1
-	cmpi.b		%d1,&ZERO
-	beq.l		src_zero
-	cmpi.b		%d1,&INF
-	beq.l		setoxm1i
-	cmpi.b		%d1,&DENORM
-	beq.l		setoxm1d
-	cmpi.b		%d1,&QNAN
-	beq.l		src_qnan
-	bra.l		src_snan
-
-	global		ftanh
-ftanh:
-	mov.b		STAG(%a6),%d1
-	beq.l		stanh
-	cmpi.b		%d1,&ZERO
-	beq.l		src_zero
-	cmpi.b		%d1,&INF
-	beq.l		src_one
-	cmpi.b		%d1,&DENORM
-	beq.l		stanhd
-	cmpi.b		%d1,&QNAN
-	beq.l		src_qnan
-	bra.l		src_snan
-
-	global		fatan
-fatan:
-	mov.b		STAG(%a6),%d1
-	beq.l		satan
-	cmpi.b		%d1,&ZERO
-	beq.l		src_zero
-	cmpi.b		%d1,&INF
-	beq.l		spi_2
-	cmpi.b		%d1,&DENORM
-	beq.l		satand
-	cmpi.b		%d1,&QNAN
-	beq.l		src_qnan
-	bra.l		src_snan
-
-	global		fasin
-fasin:
-	mov.b		STAG(%a6),%d1
-	beq.l		sasin
-	cmpi.b		%d1,&ZERO
-	beq.l		src_zero
-	cmpi.b		%d1,&INF
-	beq.l		t_operr
-	cmpi.b		%d1,&DENORM
-	beq.l		sasind
-	cmpi.b		%d1,&QNAN
-	beq.l		src_qnan
-	bra.l		src_snan
-
-	global		fatanh
-fatanh:
-	mov.b		STAG(%a6),%d1
-	beq.l		satanh
-	cmpi.b		%d1,&ZERO
-	beq.l		src_zero
-	cmpi.b		%d1,&INF
-	beq.l		t_operr
-	cmpi.b		%d1,&DENORM
-	beq.l		satanhd
-	cmpi.b		%d1,&QNAN
-	beq.l		src_qnan
-	bra.l		src_snan
-
-	global		fsine
-fsine:
-	mov.b		STAG(%a6),%d1
-	beq.l		ssin
-	cmpi.b		%d1,&ZERO
-	beq.l		src_zero
-	cmpi.b		%d1,&INF
-	beq.l		t_operr
-	cmpi.b		%d1,&DENORM
-	beq.l		ssind
-	cmpi.b		%d1,&QNAN
-	beq.l		src_qnan
-	bra.l		src_snan
-
-	global		ftan
-ftan:
-	mov.b		STAG(%a6),%d1
-	beq.l		stan
-	cmpi.b		%d1,&ZERO
-	beq.l		src_zero
-	cmpi.b		%d1,&INF
-	beq.l		t_operr
-	cmpi.b		%d1,&DENORM
-	beq.l		stand
-	cmpi.b		%d1,&QNAN
-	beq.l		src_qnan
-	bra.l		src_snan
-
-	global		fetox
-fetox:
-	mov.b		STAG(%a6),%d1
-	beq.l		setox
-	cmpi.b		%d1,&ZERO
-	beq.l		ld_pone
-	cmpi.b		%d1,&INF
-	beq.l		szr_inf
-	cmpi.b		%d1,&DENORM
-	beq.l		setoxd
-	cmpi.b		%d1,&QNAN
-	beq.l		src_qnan
-	bra.l		src_snan
-
-	global		ftwotox
-ftwotox:
-	mov.b		STAG(%a6),%d1
-	beq.l		stwotox
-	cmpi.b		%d1,&ZERO
-	beq.l		ld_pone
-	cmpi.b		%d1,&INF
-	beq.l		szr_inf
-	cmpi.b		%d1,&DENORM
-	beq.l		stwotoxd
-	cmpi.b		%d1,&QNAN
-	beq.l		src_qnan
-	bra.l		src_snan
-
-	global		ftentox
-ftentox:
-	mov.b		STAG(%a6),%d1
-	beq.l		stentox
-	cmpi.b		%d1,&ZERO
-	beq.l		ld_pone
-	cmpi.b		%d1,&INF
-	beq.l		szr_inf
-	cmpi.b		%d1,&DENORM
-	beq.l		stentoxd
-	cmpi.b		%d1,&QNAN
-	beq.l		src_qnan
-	bra.l		src_snan
-
-	global		flogn
-flogn:
-	mov.b		STAG(%a6),%d1
-	beq.l		slogn
-	cmpi.b		%d1,&ZERO
-	beq.l		t_dz2
-	cmpi.b		%d1,&INF
-	beq.l		sopr_inf
-	cmpi.b		%d1,&DENORM
-	beq.l		slognd
-	cmpi.b		%d1,&QNAN
-	beq.l		src_qnan
-	bra.l		src_snan
-
-	global		flog10
-flog10:
-	mov.b		STAG(%a6),%d1
-	beq.l		slog10
-	cmpi.b		%d1,&ZERO
-	beq.l		t_dz2
-	cmpi.b		%d1,&INF
-	beq.l		sopr_inf
-	cmpi.b		%d1,&DENORM
-	beq.l		slog10d
-	cmpi.b		%d1,&QNAN
-	beq.l		src_qnan
-	bra.l		src_snan
-
-	global		flog2
-flog2:
-	mov.b		STAG(%a6),%d1
-	beq.l		slog2
-	cmpi.b		%d1,&ZERO
-	beq.l		t_dz2
-	cmpi.b		%d1,&INF
-	beq.l		sopr_inf
-	cmpi.b		%d1,&DENORM
-	beq.l		slog2d
-	cmpi.b		%d1,&QNAN
-	beq.l		src_qnan
-	bra.l		src_snan
-
-	global		fcosh
-fcosh:
-	mov.b		STAG(%a6),%d1
-	beq.l		scosh
-	cmpi.b		%d1,&ZERO
-	beq.l		ld_pone
-	cmpi.b		%d1,&INF
-	beq.l		ld_pinf
-	cmpi.b		%d1,&DENORM
-	beq.l		scoshd
-	cmpi.b		%d1,&QNAN
-	beq.l		src_qnan
-	bra.l		src_snan
-
-	global		facos
-facos:
-	mov.b		STAG(%a6),%d1
-	beq.l		sacos
-	cmpi.b		%d1,&ZERO
-	beq.l		ld_ppi2
-	cmpi.b		%d1,&INF
-	beq.l		t_operr
-	cmpi.b		%d1,&DENORM
-	beq.l		sacosd
-	cmpi.b		%d1,&QNAN
-	beq.l		src_qnan
-	bra.l		src_snan
-
-	global		fcos
-fcos:
-	mov.b		STAG(%a6),%d1
-	beq.l		scos
-	cmpi.b		%d1,&ZERO
-	beq.l		ld_pone
-	cmpi.b		%d1,&INF
-	beq.l		t_operr
-	cmpi.b		%d1,&DENORM
-	beq.l		scosd
-	cmpi.b		%d1,&QNAN
-	beq.l		src_qnan
-	bra.l		src_snan
-
-	global		fgetexp
-fgetexp:
-	mov.b		STAG(%a6),%d1
-	beq.l		sgetexp
-	cmpi.b		%d1,&ZERO
-	beq.l		src_zero
-	cmpi.b		%d1,&INF
-	beq.l		t_operr
-	cmpi.b		%d1,&DENORM
-	beq.l		sgetexpd
-	cmpi.b		%d1,&QNAN
-	beq.l		src_qnan
-	bra.l		src_snan
-
-	global		fgetman
-fgetman:
-	mov.b		STAG(%a6),%d1
-	beq.l		sgetman
-	cmpi.b		%d1,&ZERO
-	beq.l		src_zero
-	cmpi.b		%d1,&INF
-	beq.l		t_operr
-	cmpi.b		%d1,&DENORM
-	beq.l		sgetmand
-	cmpi.b		%d1,&QNAN
-	beq.l		src_qnan
-	bra.l		src_snan
-
-	global		fsincos
-fsincos:
-	mov.b		STAG(%a6),%d1
-	beq.l		ssincos
-	cmpi.b		%d1,&ZERO
-	beq.l		ssincosz
-	cmpi.b		%d1,&INF
-	beq.l		ssincosi
-	cmpi.b		%d1,&DENORM
-	beq.l		ssincosd
-	cmpi.b		%d1,&QNAN
-	beq.l		ssincosqnan
-	bra.l		ssincossnan
-
-	global		fmod
-fmod:
-	mov.b		STAG(%a6),%d1
-	beq.l		smod_snorm
-	cmpi.b		%d1,&ZERO
-	beq.l		smod_szero
-	cmpi.b		%d1,&INF
-	beq.l		smod_sinf
-	cmpi.b		%d1,&DENORM
-	beq.l		smod_sdnrm
-	cmpi.b		%d1,&QNAN
-	beq.l		sop_sqnan
-	bra.l		sop_ssnan
-
-	global		frem
-frem:
-	mov.b		STAG(%a6),%d1
-	beq.l		srem_snorm
-	cmpi.b		%d1,&ZERO
-	beq.l		srem_szero
-	cmpi.b		%d1,&INF
-	beq.l		srem_sinf
-	cmpi.b		%d1,&DENORM
-	beq.l		srem_sdnrm
-	cmpi.b		%d1,&QNAN
-	beq.l		sop_sqnan
-	bra.l		sop_ssnan
-
-	global		fscale
-fscale:
-	mov.b		STAG(%a6),%d1
-	beq.l		sscale_snorm
-	cmpi.b		%d1,&ZERO
-	beq.l		sscale_szero
-	cmpi.b		%d1,&INF
-	beq.l		sscale_sinf
-	cmpi.b		%d1,&DENORM
-	beq.l		sscale_sdnrm
-	cmpi.b		%d1,&QNAN
-	beq.l		sop_sqnan
-	bra.l		sop_ssnan
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	fgen_except(): catch an exception during transcendental		#
-#		       emulation					#
-#									#
-# XREF ****************************************************************	#
-#	fmul() - emulate a multiply instruction				#
-#	fadd() - emulate an add instruction				#
-#	fin() - emulate an fmove instruction				#
-#									#
-# INPUT ***************************************************************	#
-#	fp0 = destination operand					#
-#	d0  = type of instruction that took exception			#
-#	fsave frame = source operand					#
-#									#
-# OUTPUT **************************************************************	#
-#	fp0 = result							#
-#	fp1 = EXOP							#
-#									#
-# ALGORITHM ***********************************************************	#
-#	An exception occurred on the last instruction of the		#
-# transcendental emulation. hopefully, this won't be happening much	#
-# because it will be VERY slow.						#
-#	The only exceptions capable of passing through here are		#
-# Overflow, Underflow, and Unsupported Data Type.			#
-#									#
-#########################################################################
-
-	global		fgen_except
-fgen_except:
-	cmpi.b		0x3(%sp),&0x7		# is exception UNSUPP?
-	beq.b		fge_unsupp		# yes
-
-	mov.b		&NORM,STAG(%a6)
-
-fge_cont:
-	mov.b		&NORM,DTAG(%a6)
-
-# ok, I have a problem with putting the dst op at FP_DST. the emulation
-# routines aren't supposed to alter the operands but we've just squashed
-# FP_DST here...
-
-# 8/17/93 - this turns out to be more of a "cleanliness" standpoint
-# then a potential bug. to begin with, only the dyadic functions
-# frem,fmod, and fscale would get the dst trashed here. But, for
-# the 060SP, the FP_DST is never used again anyways.
-	fmovm.x		&0x80,FP_DST(%a6)	# dst op is in fp0
-
-	lea		0x4(%sp),%a0		# pass: ptr to src op
-	lea		FP_DST(%a6),%a1		# pass: ptr to dst op
-
-	cmpi.b		%d1,&FMOV_OP
-	beq.b		fge_fin			# it was an "fmov"
-	cmpi.b		%d1,&FADD_OP
-	beq.b		fge_fadd		# it was an "fadd"
-fge_fmul:
-	bsr.l		fmul
-	rts
-fge_fadd:
-	bsr.l		fadd
-	rts
-fge_fin:
-	bsr.l		fin
-	rts
-
-fge_unsupp:
-	mov.b		&DENORM,STAG(%a6)
-	bra.b		fge_cont
-
-#
-# This table holds the offsets of the emulation routines for each individual
-# math operation relative to the address of this table. Included are
-# routines like fadd/fmul/fabs as well as the transcendentals.
-# The location within the table is determined by the extension bits of the
-# operation longword.
-#
-
-	swbeg		&109
-tbl_unsupp:
-	long		fin		- tbl_unsupp	# 00: fmove
-	long		fint		- tbl_unsupp	# 01: fint
-	long		fsinh		- tbl_unsupp	# 02: fsinh
-	long		fintrz		- tbl_unsupp	# 03: fintrz
-	long		fsqrt		- tbl_unsupp	# 04: fsqrt
-	long		tbl_unsupp	- tbl_unsupp
-	long		flognp1		- tbl_unsupp	# 06: flognp1
-	long		tbl_unsupp	- tbl_unsupp
-	long		fetoxm1		- tbl_unsupp	# 08: fetoxm1
-	long		ftanh		- tbl_unsupp	# 09: ftanh
-	long		fatan		- tbl_unsupp	# 0a: fatan
-	long		tbl_unsupp	- tbl_unsupp
-	long		fasin		- tbl_unsupp	# 0c: fasin
-	long		fatanh		- tbl_unsupp	# 0d: fatanh
-	long		fsine		- tbl_unsupp	# 0e: fsin
-	long		ftan		- tbl_unsupp	# 0f: ftan
-	long		fetox		- tbl_unsupp	# 10: fetox
-	long		ftwotox		- tbl_unsupp	# 11: ftwotox
-	long		ftentox		- tbl_unsupp	# 12: ftentox
-	long		tbl_unsupp	- tbl_unsupp
-	long		flogn		- tbl_unsupp	# 14: flogn
-	long		flog10		- tbl_unsupp	# 15: flog10
-	long		flog2		- tbl_unsupp	# 16: flog2
-	long		tbl_unsupp	- tbl_unsupp
-	long		fabs		- tbl_unsupp	# 18: fabs
-	long		fcosh		- tbl_unsupp	# 19: fcosh
-	long		fneg		- tbl_unsupp	# 1a: fneg
-	long		tbl_unsupp	- tbl_unsupp
-	long		facos		- tbl_unsupp	# 1c: facos
-	long		fcos		- tbl_unsupp	# 1d: fcos
-	long		fgetexp		- tbl_unsupp	# 1e: fgetexp
-	long		fgetman		- tbl_unsupp	# 1f: fgetman
-	long		fdiv		- tbl_unsupp	# 20: fdiv
-	long		fmod		- tbl_unsupp	# 21: fmod
-	long		fadd		- tbl_unsupp	# 22: fadd
-	long		fmul		- tbl_unsupp	# 23: fmul
-	long		fsgldiv		- tbl_unsupp	# 24: fsgldiv
-	long		frem		- tbl_unsupp	# 25: frem
-	long		fscale		- tbl_unsupp	# 26: fscale
-	long		fsglmul		- tbl_unsupp	# 27: fsglmul
-	long		fsub		- tbl_unsupp	# 28: fsub
-	long		tbl_unsupp	- tbl_unsupp
-	long		tbl_unsupp	- tbl_unsupp
-	long		tbl_unsupp	- tbl_unsupp
-	long		tbl_unsupp	- tbl_unsupp
-	long		tbl_unsupp	- tbl_unsupp
-	long		tbl_unsupp	- tbl_unsupp
-	long		tbl_unsupp	- tbl_unsupp
-	long		fsincos		- tbl_unsupp	# 30: fsincos
-	long		fsincos		- tbl_unsupp	# 31: fsincos
-	long		fsincos		- tbl_unsupp	# 32: fsincos
-	long		fsincos		- tbl_unsupp	# 33: fsincos
-	long		fsincos		- tbl_unsupp	# 34: fsincos
-	long		fsincos		- tbl_unsupp	# 35: fsincos
-	long		fsincos		- tbl_unsupp	# 36: fsincos
-	long		fsincos		- tbl_unsupp	# 37: fsincos
-	long		fcmp		- tbl_unsupp	# 38: fcmp
-	long		tbl_unsupp	- tbl_unsupp
-	long		ftst		- tbl_unsupp	# 3a: ftst
-	long		tbl_unsupp	- tbl_unsupp
-	long		tbl_unsupp	- tbl_unsupp
-	long		tbl_unsupp	- tbl_unsupp
-	long		tbl_unsupp	- tbl_unsupp
-	long		tbl_unsupp	- tbl_unsupp
-	long		fsin		- tbl_unsupp	# 40: fsmove
-	long		fssqrt		- tbl_unsupp	# 41: fssqrt
-	long		tbl_unsupp	- tbl_unsupp
-	long		tbl_unsupp	- tbl_unsupp
-	long		fdin		- tbl_unsupp	# 44: fdmove
-	long		fdsqrt		- tbl_unsupp	# 45: fdsqrt
-	long		tbl_unsupp	- tbl_unsupp
-	long		tbl_unsupp	- tbl_unsupp
-	long		tbl_unsupp	- tbl_unsupp
-	long		tbl_unsupp	- tbl_unsupp
-	long		tbl_unsupp	- tbl_unsupp
-	long		tbl_unsupp	- tbl_unsupp
-	long		tbl_unsupp	- tbl_unsupp
-	long		tbl_unsupp	- tbl_unsupp
-	long		tbl_unsupp	- tbl_unsupp
-	long		tbl_unsupp	- tbl_unsupp
-	long		tbl_unsupp	- tbl_unsupp
-	long		tbl_unsupp	- tbl_unsupp
-	long		tbl_unsupp	- tbl_unsupp
-	long		tbl_unsupp	- tbl_unsupp
-	long		tbl_unsupp	- tbl_unsupp
-	long		tbl_unsupp	- tbl_unsupp
-	long		tbl_unsupp	- tbl_unsupp
-	long		tbl_unsupp	- tbl_unsupp
-	long		fsabs		- tbl_unsupp	# 58: fsabs
-	long		tbl_unsupp	- tbl_unsupp
-	long		fsneg		- tbl_unsupp	# 5a: fsneg
-	long		tbl_unsupp	- tbl_unsupp
-	long		fdabs		- tbl_unsupp	# 5c: fdabs
-	long		tbl_unsupp	- tbl_unsupp
-	long		fdneg		- tbl_unsupp	# 5e: fdneg
-	long		tbl_unsupp	- tbl_unsupp
-	long		fsdiv		- tbl_unsupp	# 60: fsdiv
-	long		tbl_unsupp	- tbl_unsupp
-	long		fsadd		- tbl_unsupp	# 62: fsadd
-	long		fsmul		- tbl_unsupp	# 63: fsmul
-	long		fddiv		- tbl_unsupp	# 64: fddiv
-	long		tbl_unsupp	- tbl_unsupp
-	long		fdadd		- tbl_unsupp	# 66: fdadd
-	long		fdmul		- tbl_unsupp	# 67: fdmul
-	long		fssub		- tbl_unsupp	# 68: fssub
-	long		tbl_unsupp	- tbl_unsupp
-	long		tbl_unsupp	- tbl_unsupp
-	long		tbl_unsupp	- tbl_unsupp
-	long		fdsub		- tbl_unsupp	# 6c: fdsub
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	fmul(): emulates the fmul instruction				#
-#	fsmul(): emulates the fsmul instruction				#
-#	fdmul(): emulates the fdmul instruction				#
-#									#
-# XREF ****************************************************************	#
-#	scale_to_zero_src() - scale src exponent to zero		#
-#	scale_to_zero_dst() - scale dst exponent to zero		#
-#	unf_res() - return default underflow result			#
-#	ovf_res() - return default overflow result			#
-#	res_qnan() - return QNAN result					#
-#	res_snan() - return SNAN result					#
-#									#
-# INPUT ***************************************************************	#
-#	a0 = pointer to extended precision source operand		#
-#	a1 = pointer to extended precision destination operand		#
-#	d0  rnd prec,mode						#
-#									#
-# OUTPUT **************************************************************	#
-#	fp0 = result							#
-#	fp1 = EXOP (if exception occurred)				#
-#									#
-# ALGORITHM ***********************************************************	#
-#	Handle NANs, infinities, and zeroes as special cases. Divide	#
-# norms/denorms into ext/sgl/dbl precision.				#
-#	For norms/denorms, scale the exponents such that a multiply	#
-# instruction won't cause an exception. Use the regular fmul to		#
-# compute a result. Check if the regular operands would have taken	#
-# an exception. If so, return the default overflow/underflow result	#
-# and return the EXOP if exceptions are enabled. Else, scale the	#
-# result operand to the proper exponent.				#
-#									#
-#########################################################################
-
-	align		0x10
-tbl_fmul_ovfl:
-	long		0x3fff - 0x7ffe		# ext_max
-	long		0x3fff - 0x407e		# sgl_max
-	long		0x3fff - 0x43fe		# dbl_max
-tbl_fmul_unfl:
-	long		0x3fff + 0x0001		# ext_unfl
-	long		0x3fff - 0x3f80		# sgl_unfl
-	long		0x3fff - 0x3c00		# dbl_unfl
-
-	global		fsmul
-fsmul:
-	andi.b		&0x30,%d0		# clear rnd prec
-	ori.b		&s_mode*0x10,%d0	# insert sgl prec
-	bra.b		fmul
-
-	global		fdmul
-fdmul:
-	andi.b		&0x30,%d0
-	ori.b		&d_mode*0x10,%d0	# insert dbl prec
-
-	global		fmul
-fmul:
-	mov.l		%d0,L_SCR3(%a6)		# store rnd info
-
-	clr.w		%d1
-	mov.b		DTAG(%a6),%d1
-	lsl.b		&0x3,%d1
-	or.b		STAG(%a6),%d1		# combine src tags
-	bne.w		fmul_not_norm		# optimize on non-norm input
-
-fmul_norm:
-	mov.w		DST_EX(%a1),FP_SCR1_EX(%a6)
-	mov.l		DST_HI(%a1),FP_SCR1_HI(%a6)
-	mov.l		DST_LO(%a1),FP_SCR1_LO(%a6)
-
-	mov.w		SRC_EX(%a0),FP_SCR0_EX(%a6)
-	mov.l		SRC_HI(%a0),FP_SCR0_HI(%a6)
-	mov.l		SRC_LO(%a0),FP_SCR0_LO(%a6)
-
-	bsr.l		scale_to_zero_src	# scale src exponent
-	mov.l		%d0,-(%sp)		# save scale factor 1
-
-	bsr.l		scale_to_zero_dst	# scale dst exponent
-
-	add.l		%d0,(%sp)		# SCALE_FACTOR = scale1 + scale2
-
-	mov.w		2+L_SCR3(%a6),%d1	# fetch precision
-	lsr.b		&0x6,%d1		# shift to lo bits
-	mov.l		(%sp)+,%d0		# load S.F.
-	cmp.l		%d0,(tbl_fmul_ovfl.w,%pc,%d1.w*4) # would result ovfl?
-	beq.w		fmul_may_ovfl		# result may rnd to overflow
-	blt.w		fmul_ovfl		# result will overflow
-
-	cmp.l		%d0,(tbl_fmul_unfl.w,%pc,%d1.w*4) # would result unfl?
-	beq.w		fmul_may_unfl		# result may rnd to no unfl
-	bgt.w		fmul_unfl		# result will underflow
-
-#
-# NORMAL:
-# - the result of the multiply operation will neither overflow nor underflow.
-# - do the multiply to the proper precision and rounding mode.
-# - scale the result exponent using the scale factor. if both operands were
-# normalized then we really don't need to go through this scaling. but for now,
-# this will do.
-#
-fmul_normal:
-	fmovm.x		FP_SCR1(%a6),&0x80	# load dst operand
-
-	fmov.l		L_SCR3(%a6),%fpcr	# set FPCR
-	fmov.l		&0x0,%fpsr		# clear FPSR
-
-	fmul.x		FP_SCR0(%a6),%fp0	# execute multiply
-
-	fmov.l		%fpsr,%d1		# save status
-	fmov.l		&0x0,%fpcr		# clear FPCR
-
-	or.l		%d1,USER_FPSR(%a6)	# save INEX2,N
-
-fmul_normal_exit:
-	fmovm.x		&0x80,FP_SCR0(%a6)	# store out result
-	mov.l		%d2,-(%sp)		# save d2
-	mov.w		FP_SCR0_EX(%a6),%d1	# load {sgn,exp}
-	mov.l		%d1,%d2			# make a copy
-	andi.l		&0x7fff,%d1		# strip sign
-	andi.w		&0x8000,%d2		# keep old sign
-	sub.l		%d0,%d1			# add scale factor
-	or.w		%d2,%d1			# concat old sign,new exp
-	mov.w		%d1,FP_SCR0_EX(%a6)	# insert new exponent
-	mov.l		(%sp)+,%d2		# restore d2
-	fmovm.x		FP_SCR0(%a6),&0x80	# return default result in fp0
-	rts
-
-#
-# OVERFLOW:
-# - the result of the multiply operation is an overflow.
-# - do the multiply to the proper precision and rounding mode in order to
-# set the inexact bits.
-# - calculate the default result and return it in fp0.
-# - if overflow or inexact is enabled, we need a multiply result rounded to
-# extended precision. if the original operation was extended, then we have this
-# result. if the original operation was single or double, we have to do another
-# multiply using extended precision and the correct rounding mode. the result
-# of this operation then has its exponent scaled by -0x6000 to create the
-# exceptional operand.
-#
-fmul_ovfl:
-	fmovm.x		FP_SCR1(%a6),&0x80	# load dst operand
-
-	fmov.l		L_SCR3(%a6),%fpcr	# set FPCR
-	fmov.l		&0x0,%fpsr		# clear FPSR
-
-	fmul.x		FP_SCR0(%a6),%fp0	# execute multiply
-
-	fmov.l		%fpsr,%d1		# save status
-	fmov.l		&0x0,%fpcr		# clear FPCR
-
-	or.l		%d1,USER_FPSR(%a6)	# save INEX2,N
-
-# save setting this until now because this is where fmul_may_ovfl may jump in
-fmul_ovfl_tst:
-	or.l		&ovfl_inx_mask,USER_FPSR(%a6) # set ovfl/aovfl/ainex
-
-	mov.b		FPCR_ENABLE(%a6),%d1
-	andi.b		&0x13,%d1		# is OVFL or INEX enabled?
-	bne.b		fmul_ovfl_ena		# yes
-
-# calculate the default result
-fmul_ovfl_dis:
-	btst		&neg_bit,FPSR_CC(%a6)	# is result negative?
-	sne		%d1			# set sign param accordingly
-	mov.l		L_SCR3(%a6),%d0		# pass rnd prec,mode
-	bsr.l		ovf_res			# calculate default result
-	or.b		%d0,FPSR_CC(%a6)	# set INF,N if applicable
-	fmovm.x		(%a0),&0x80		# return default result in fp0
-	rts
-
-#
-# OVFL is enabled; Create EXOP:
-# - if precision is extended, then we have the EXOP. simply bias the exponent
-# with an extra -0x6000. if the precision is single or double, we need to
-# calculate a result rounded to extended precision.
-#
-fmul_ovfl_ena:
-	mov.l		L_SCR3(%a6),%d1
-	andi.b		&0xc0,%d1		# test the rnd prec
-	bne.b		fmul_ovfl_ena_sd	# it's sgl or dbl
-
-fmul_ovfl_ena_cont:
-	fmovm.x		&0x80,FP_SCR0(%a6)	# move result to stack
-
-	mov.l		%d2,-(%sp)		# save d2
-	mov.w		FP_SCR0_EX(%a6),%d1	# fetch {sgn,exp}
-	mov.w		%d1,%d2			# make a copy
-	andi.l		&0x7fff,%d1		# strip sign
-	sub.l		%d0,%d1			# add scale factor
-	subi.l		&0x6000,%d1		# subtract bias
-	andi.w		&0x7fff,%d1		# clear sign bit
-	andi.w		&0x8000,%d2		# keep old sign
-	or.w		%d2,%d1			# concat old sign,new exp
-	mov.w		%d1,FP_SCR0_EX(%a6)	# insert new exponent
-	mov.l		(%sp)+,%d2		# restore d2
-	fmovm.x		FP_SCR0(%a6),&0x40	# return EXOP in fp1
-	bra.b		fmul_ovfl_dis
-
-fmul_ovfl_ena_sd:
-	fmovm.x		FP_SCR1(%a6),&0x80	# load dst operand
-
-	mov.l		L_SCR3(%a6),%d1
-	andi.b		&0x30,%d1		# keep rnd mode only
-	fmov.l		%d1,%fpcr		# set FPCR
-
-	fmul.x		FP_SCR0(%a6),%fp0	# execute multiply
-
-	fmov.l		&0x0,%fpcr		# clear FPCR
-	bra.b		fmul_ovfl_ena_cont
-
-#
-# may OVERFLOW:
-# - the result of the multiply operation MAY overflow.
-# - do the multiply to the proper precision and rounding mode in order to
-# set the inexact bits.
-# - calculate the default result and return it in fp0.
-#
-fmul_may_ovfl:
-	fmovm.x		FP_SCR1(%a6),&0x80	# load dst op
-
-	fmov.l		L_SCR3(%a6),%fpcr	# set FPCR
-	fmov.l		&0x0,%fpsr		# clear FPSR
-
-	fmul.x		FP_SCR0(%a6),%fp0	# execute multiply
-
-	fmov.l		%fpsr,%d1		# save status
-	fmov.l		&0x0,%fpcr		# clear FPCR
-
-	or.l		%d1,USER_FPSR(%a6)	# save INEX2,N
-
-	fabs.x		%fp0,%fp1		# make a copy of result
-	fcmp.b		%fp1,&0x2		# is |result| >= 2.b?
-	fbge.w		fmul_ovfl_tst		# yes; overflow has occurred
-
-# no, it didn't overflow; we have correct result
-	bra.w		fmul_normal_exit
-
-#
-# UNDERFLOW:
-# - the result of the multiply operation is an underflow.
-# - do the multiply to the proper precision and rounding mode in order to
-# set the inexact bits.
-# - calculate the default result and return it in fp0.
-# - if overflow or inexact is enabled, we need a multiply result rounded to
-# extended precision. if the original operation was extended, then we have this
-# result. if the original operation was single or double, we have to do another
-# multiply using extended precision and the correct rounding mode. the result
-# of this operation then has its exponent scaled by -0x6000 to create the
-# exceptional operand.
-#
-fmul_unfl:
-	bset		&unfl_bit,FPSR_EXCEPT(%a6) # set unfl exc bit
-
-# for fun, let's use only extended precision, round to zero. then, let
-# the unf_res() routine figure out all the rest.
-# will we get the correct answer.
-	fmovm.x		FP_SCR1(%a6),&0x80	# load dst operand
-
-	fmov.l		&rz_mode*0x10,%fpcr	# set FPCR
-	fmov.l		&0x0,%fpsr		# clear FPSR
-
-	fmul.x		FP_SCR0(%a6),%fp0	# execute multiply
-
-	fmov.l		%fpsr,%d1		# save status
-	fmov.l		&0x0,%fpcr		# clear FPCR
-
-	or.l		%d1,USER_FPSR(%a6)	# save INEX2,N
-
-	mov.b		FPCR_ENABLE(%a6),%d1
-	andi.b		&0x0b,%d1		# is UNFL or INEX enabled?
-	bne.b		fmul_unfl_ena		# yes
-
-fmul_unfl_dis:
-	fmovm.x		&0x80,FP_SCR0(%a6)	# store out result
-
-	lea		FP_SCR0(%a6),%a0	# pass: result addr
-	mov.l		L_SCR3(%a6),%d1		# pass: rnd prec,mode
-	bsr.l		unf_res			# calculate default result
-	or.b		%d0,FPSR_CC(%a6)	# unf_res2 may have set 'Z'
-	fmovm.x		FP_SCR0(%a6),&0x80	# return default result in fp0
-	rts
-
-#
-# UNFL is enabled.
-#
-fmul_unfl_ena:
-	fmovm.x		FP_SCR1(%a6),&0x40	# load dst op
-
-	mov.l		L_SCR3(%a6),%d1
-	andi.b		&0xc0,%d1		# is precision extended?
-	bne.b		fmul_unfl_ena_sd	# no, sgl or dbl
-
-# if the rnd mode is anything but RZ, then we have to re-do the above
-# multiplication because we used RZ for all.
-	fmov.l		L_SCR3(%a6),%fpcr	# set FPCR
-
-fmul_unfl_ena_cont:
-	fmov.l		&0x0,%fpsr		# clear FPSR
-
-	fmul.x		FP_SCR0(%a6),%fp1	# execute multiply
-
-	fmov.l		&0x0,%fpcr		# clear FPCR
-
-	fmovm.x		&0x40,FP_SCR0(%a6)	# save result to stack
-	mov.l		%d2,-(%sp)		# save d2
-	mov.w		FP_SCR0_EX(%a6),%d1	# fetch {sgn,exp}
-	mov.l		%d1,%d2			# make a copy
-	andi.l		&0x7fff,%d1		# strip sign
-	andi.w		&0x8000,%d2		# keep old sign
-	sub.l		%d0,%d1			# add scale factor
-	addi.l		&0x6000,%d1		# add bias
-	andi.w		&0x7fff,%d1
-	or.w		%d2,%d1			# concat old sign,new exp
-	mov.w		%d1,FP_SCR0_EX(%a6)	# insert new exponent
-	mov.l		(%sp)+,%d2		# restore d2
-	fmovm.x		FP_SCR0(%a6),&0x40	# return EXOP in fp1
-	bra.w		fmul_unfl_dis
-
-fmul_unfl_ena_sd:
-	mov.l		L_SCR3(%a6),%d1
-	andi.b		&0x30,%d1		# use only rnd mode
-	fmov.l		%d1,%fpcr		# set FPCR
-
-	bra.b		fmul_unfl_ena_cont
-
-# MAY UNDERFLOW:
-# -use the correct rounding mode and precision. this code favors operations
-# that do not underflow.
-fmul_may_unfl:
-	fmovm.x		FP_SCR1(%a6),&0x80	# load dst operand
-
-	fmov.l		L_SCR3(%a6),%fpcr	# set FPCR
-	fmov.l		&0x0,%fpsr		# clear FPSR
-
-	fmul.x		FP_SCR0(%a6),%fp0	# execute multiply
-
-	fmov.l		%fpsr,%d1		# save status
-	fmov.l		&0x0,%fpcr		# clear FPCR
-
-	or.l		%d1,USER_FPSR(%a6)	# save INEX2,N
-
-	fabs.x		%fp0,%fp1		# make a copy of result
-	fcmp.b		%fp1,&0x2		# is |result| > 2.b?
-	fbgt.w		fmul_normal_exit	# no; no underflow occurred
-	fblt.w		fmul_unfl		# yes; underflow occurred
-
-#
-# we still don't know if underflow occurred. result is ~ equal to 2. but,
-# we don't know if the result was an underflow that rounded up to a 2 or
-# a normalized number that rounded down to a 2. so, redo the entire operation
-# using RZ as the rounding mode to see what the pre-rounded result is.
-# this case should be relatively rare.
-#
-	fmovm.x		FP_SCR1(%a6),&0x40	# load dst operand
-
-	mov.l		L_SCR3(%a6),%d1
-	andi.b		&0xc0,%d1		# keep rnd prec
-	ori.b		&rz_mode*0x10,%d1	# insert RZ
-
-	fmov.l		%d1,%fpcr		# set FPCR
-	fmov.l		&0x0,%fpsr		# clear FPSR
-
-	fmul.x		FP_SCR0(%a6),%fp1	# execute multiply
-
-	fmov.l		&0x0,%fpcr		# clear FPCR
-	fabs.x		%fp1			# make absolute value
-	fcmp.b		%fp1,&0x2		# is |result| < 2.b?
-	fbge.w		fmul_normal_exit	# no; no underflow occurred
-	bra.w		fmul_unfl		# yes, underflow occurred
-
-################################################################################
-
-#
-# Multiply: inputs are not both normalized; what are they?
-#
-fmul_not_norm:
-	mov.w		(tbl_fmul_op.b,%pc,%d1.w*2),%d1
-	jmp		(tbl_fmul_op.b,%pc,%d1.w)
-
-	swbeg		&48
-tbl_fmul_op:
-	short		fmul_norm	- tbl_fmul_op # NORM x NORM
-	short		fmul_zero	- tbl_fmul_op # NORM x ZERO
-	short		fmul_inf_src	- tbl_fmul_op # NORM x INF
-	short		fmul_res_qnan	- tbl_fmul_op # NORM x QNAN
-	short		fmul_norm	- tbl_fmul_op # NORM x DENORM
-	short		fmul_res_snan	- tbl_fmul_op # NORM x SNAN
-	short		tbl_fmul_op	- tbl_fmul_op #
-	short		tbl_fmul_op	- tbl_fmul_op #
-
-	short		fmul_zero	- tbl_fmul_op # ZERO x NORM
-	short		fmul_zero	- tbl_fmul_op # ZERO x ZERO
-	short		fmul_res_operr	- tbl_fmul_op # ZERO x INF
-	short		fmul_res_qnan	- tbl_fmul_op # ZERO x QNAN
-	short		fmul_zero	- tbl_fmul_op # ZERO x DENORM
-	short		fmul_res_snan	- tbl_fmul_op # ZERO x SNAN
-	short		tbl_fmul_op	- tbl_fmul_op #
-	short		tbl_fmul_op	- tbl_fmul_op #
-
-	short		fmul_inf_dst	- tbl_fmul_op # INF x NORM
-	short		fmul_res_operr	- tbl_fmul_op # INF x ZERO
-	short		fmul_inf_dst	- tbl_fmul_op # INF x INF
-	short		fmul_res_qnan	- tbl_fmul_op # INF x QNAN
-	short		fmul_inf_dst	- tbl_fmul_op # INF x DENORM
-	short		fmul_res_snan	- tbl_fmul_op # INF x SNAN
-	short		tbl_fmul_op	- tbl_fmul_op #
-	short		tbl_fmul_op	- tbl_fmul_op #
-
-	short		fmul_res_qnan	- tbl_fmul_op # QNAN x NORM
-	short		fmul_res_qnan	- tbl_fmul_op # QNAN x ZERO
-	short		fmul_res_qnan	- tbl_fmul_op # QNAN x INF
-	short		fmul_res_qnan	- tbl_fmul_op # QNAN x QNAN
-	short		fmul_res_qnan	- tbl_fmul_op # QNAN x DENORM
-	short		fmul_res_snan	- tbl_fmul_op # QNAN x SNAN
-	short		tbl_fmul_op	- tbl_fmul_op #
-	short		tbl_fmul_op	- tbl_fmul_op #
-
-	short		fmul_norm	- tbl_fmul_op # NORM x NORM
-	short		fmul_zero	- tbl_fmul_op # NORM x ZERO
-	short		fmul_inf_src	- tbl_fmul_op # NORM x INF
-	short		fmul_res_qnan	- tbl_fmul_op # NORM x QNAN
-	short		fmul_norm	- tbl_fmul_op # NORM x DENORM
-	short		fmul_res_snan	- tbl_fmul_op # NORM x SNAN
-	short		tbl_fmul_op	- tbl_fmul_op #
-	short		tbl_fmul_op	- tbl_fmul_op #
-
-	short		fmul_res_snan	- tbl_fmul_op # SNAN x NORM
-	short		fmul_res_snan	- tbl_fmul_op # SNAN x ZERO
-	short		fmul_res_snan	- tbl_fmul_op # SNAN x INF
-	short		fmul_res_snan	- tbl_fmul_op # SNAN x QNAN
-	short		fmul_res_snan	- tbl_fmul_op # SNAN x DENORM
-	short		fmul_res_snan	- tbl_fmul_op # SNAN x SNAN
-	short		tbl_fmul_op	- tbl_fmul_op #
-	short		tbl_fmul_op	- tbl_fmul_op #
-
-fmul_res_operr:
-	bra.l		res_operr
-fmul_res_snan:
-	bra.l		res_snan
-fmul_res_qnan:
-	bra.l		res_qnan
-
-#
-# Multiply: (Zero x Zero) || (Zero x norm) || (Zero x denorm)
-#
-	global		fmul_zero		# global for fsglmul
-fmul_zero:
-	mov.b		SRC_EX(%a0),%d0		# exclusive or the signs
-	mov.b		DST_EX(%a1),%d1
-	eor.b		%d0,%d1
-	bpl.b		fmul_zero_p		# result ZERO is pos.
-fmul_zero_n:
-	fmov.s		&0x80000000,%fp0	# load -ZERO
-	mov.b		&z_bmask+neg_bmask,FPSR_CC(%a6) # set Z/N
-	rts
-fmul_zero_p:
-	fmov.s		&0x00000000,%fp0	# load +ZERO
-	mov.b		&z_bmask,FPSR_CC(%a6)	# set Z
-	rts
-
-#
-# Multiply: (inf x inf) || (inf x norm) || (inf x denorm)
-#
-# Note: The j-bit for an infinity is a don't-care. However, to be
-# strictly compatible w/ the 68881/882, we make sure to return an
-# INF w/ the j-bit set if the input INF j-bit was set. Destination
-# INFs take priority.
-#
-	global		fmul_inf_dst		# global for fsglmul
-fmul_inf_dst:
-	fmovm.x		DST(%a1),&0x80		# return INF result in fp0
-	mov.b		SRC_EX(%a0),%d0		# exclusive or the signs
-	mov.b		DST_EX(%a1),%d1
-	eor.b		%d0,%d1
-	bpl.b		fmul_inf_dst_p		# result INF is pos.
-fmul_inf_dst_n:
-	fabs.x		%fp0			# clear result sign
-	fneg.x		%fp0			# set result sign
-	mov.b		&inf_bmask+neg_bmask,FPSR_CC(%a6) # set INF/N
-	rts
-fmul_inf_dst_p:
-	fabs.x		%fp0			# clear result sign
-	mov.b		&inf_bmask,FPSR_CC(%a6)	# set INF
-	rts
-
-	global		fmul_inf_src		# global for fsglmul
-fmul_inf_src:
-	fmovm.x		SRC(%a0),&0x80		# return INF result in fp0
-	mov.b		SRC_EX(%a0),%d0		# exclusive or the signs
-	mov.b		DST_EX(%a1),%d1
-	eor.b		%d0,%d1
-	bpl.b		fmul_inf_dst_p		# result INF is pos.
-	bra.b		fmul_inf_dst_n
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	fin(): emulates the fmove instruction				#
-#	fsin(): emulates the fsmove instruction				#
-#	fdin(): emulates the fdmove instruction				#
-#									#
-# XREF ****************************************************************	#
-#	norm() - normalize mantissa for EXOP on denorm			#
-#	scale_to_zero_src() - scale src exponent to zero		#
-#	ovf_res() - return default overflow result			#
-#	unf_res() - return default underflow result			#
-#	res_qnan_1op() - return QNAN result				#
-#	res_snan_1op() - return SNAN result				#
-#									#
-# INPUT ***************************************************************	#
-#	a0 = pointer to extended precision source operand		#
-#	d0 = round prec/mode						#
-#									#
-# OUTPUT **************************************************************	#
-#	fp0 = result							#
-#	fp1 = EXOP (if exception occurred)				#
-#									#
-# ALGORITHM ***********************************************************	#
-#	Handle NANs, infinities, and zeroes as special cases. Divide	#
-# norms into extended, single, and double precision.			#
-#	Norms can be emulated w/ a regular fmove instruction. For	#
-# sgl/dbl, must scale exponent and perform an "fmove". Check to see	#
-# if the result would have overflowed/underflowed. If so, use unf_res()	#
-# or ovf_res() to return the default result. Also return EXOP if	#
-# exception is enabled. If no exception, return the default result.	#
-#	Unnorms don't pass through here.				#
-#									#
-#########################################################################
-
-	global		fsin
-fsin:
-	andi.b		&0x30,%d0		# clear rnd prec
-	ori.b		&s_mode*0x10,%d0	# insert sgl precision
-	bra.b		fin
-
-	global		fdin
-fdin:
-	andi.b		&0x30,%d0		# clear rnd prec
-	ori.b		&d_mode*0x10,%d0	# insert dbl precision
-
-	global		fin
-fin:
-	mov.l		%d0,L_SCR3(%a6)		# store rnd info
-
-	mov.b		STAG(%a6),%d1		# fetch src optype tag
-	bne.w		fin_not_norm		# optimize on non-norm input
-
-#
-# FP MOVE IN: NORMs and DENORMs ONLY!
-#
-fin_norm:
-	andi.b		&0xc0,%d0		# is precision extended?
-	bne.w		fin_not_ext		# no, so go handle dbl or sgl
-
-#
-# precision selected is extended. so...we cannot get an underflow
-# or overflow because of rounding to the correct precision. so...
-# skip the scaling and unscaling...
-#
-	tst.b		SRC_EX(%a0)		# is the operand negative?
-	bpl.b		fin_norm_done		# no
-	bset		&neg_bit,FPSR_CC(%a6)	# yes, so set 'N' ccode bit
-fin_norm_done:
-	fmovm.x		SRC(%a0),&0x80		# return result in fp0
-	rts
-
-#
-# for an extended precision DENORM, the UNFL exception bit is set
-# the accrued bit is NOT set in this instance(no inexactness!)
-#
-fin_denorm:
-	andi.b		&0xc0,%d0		# is precision extended?
-	bne.w		fin_not_ext		# no, so go handle dbl or sgl
-
-	bset		&unfl_bit,FPSR_EXCEPT(%a6) # set unfl exc bit
-	tst.b		SRC_EX(%a0)		# is the operand negative?
-	bpl.b		fin_denorm_done		# no
-	bset		&neg_bit,FPSR_CC(%a6)	# yes, so set 'N' ccode bit
-fin_denorm_done:
-	fmovm.x		SRC(%a0),&0x80		# return result in fp0
-	btst		&unfl_bit,FPCR_ENABLE(%a6) # is UNFL enabled?
-	bne.b		fin_denorm_unfl_ena	# yes
-	rts
-
-#
-# the input is an extended DENORM and underflow is enabled in the FPCR.
-# normalize the mantissa and add the bias of 0x6000 to the resulting negative
-# exponent and insert back into the operand.
-#
-fin_denorm_unfl_ena:
-	mov.w		SRC_EX(%a0),FP_SCR0_EX(%a6)
-	mov.l		SRC_HI(%a0),FP_SCR0_HI(%a6)
-	mov.l		SRC_LO(%a0),FP_SCR0_LO(%a6)
-	lea		FP_SCR0(%a6),%a0	# pass: ptr to operand
-	bsr.l		norm			# normalize result
-	neg.w		%d0			# new exponent = -(shft val)
-	addi.w		&0x6000,%d0		# add new bias to exponent
-	mov.w		FP_SCR0_EX(%a6),%d1	# fetch old sign,exp
-	andi.w		&0x8000,%d1		# keep old sign
-	andi.w		&0x7fff,%d0		# clear sign position
-	or.w		%d1,%d0			# concat new exo,old sign
-	mov.w		%d0,FP_SCR0_EX(%a6)	# insert new exponent
-	fmovm.x		FP_SCR0(%a6),&0x40	# return EXOP in fp1
-	rts
-
-#
-# operand is to be rounded to single or double precision
-#
-fin_not_ext:
-	cmpi.b		%d0,&s_mode*0x10	# separate sgl/dbl prec
-	bne.b		fin_dbl
-
-#
-# operand is to be rounded to single precision
-#
-fin_sgl:
-	mov.w		SRC_EX(%a0),FP_SCR0_EX(%a6)
-	mov.l		SRC_HI(%a0),FP_SCR0_HI(%a6)
-	mov.l		SRC_LO(%a0),FP_SCR0_LO(%a6)
-	bsr.l		scale_to_zero_src	# calculate scale factor
-
-	cmpi.l		%d0,&0x3fff-0x3f80	# will move in underflow?
-	bge.w		fin_sd_unfl		# yes; go handle underflow
-	cmpi.l		%d0,&0x3fff-0x407e	# will move in overflow?
-	beq.w		fin_sd_may_ovfl		# maybe; go check
-	blt.w		fin_sd_ovfl		# yes; go handle overflow
-
-#
-# operand will NOT overflow or underflow when moved into the fp reg file
-#
-fin_sd_normal:
-	fmov.l		&0x0,%fpsr		# clear FPSR
-	fmov.l		L_SCR3(%a6),%fpcr	# set FPCR
-
-	fmov.x		FP_SCR0(%a6),%fp0	# perform move
-
-	fmov.l		%fpsr,%d1		# save FPSR
-	fmov.l		&0x0,%fpcr		# clear FPCR
-
-	or.l		%d1,USER_FPSR(%a6)	# save INEX2,N
-
-fin_sd_normal_exit:
-	mov.l		%d2,-(%sp)		# save d2
-	fmovm.x		&0x80,FP_SCR0(%a6)	# store out result
-	mov.w		FP_SCR0_EX(%a6),%d1	# load {sgn,exp}
-	mov.w		%d1,%d2			# make a copy
-	andi.l		&0x7fff,%d1		# strip sign
-	sub.l		%d0,%d1			# add scale factor
-	andi.w		&0x8000,%d2		# keep old sign
-	or.w		%d1,%d2			# concat old sign,new exponent
-	mov.w		%d2,FP_SCR0_EX(%a6)	# insert new exponent
-	mov.l		(%sp)+,%d2		# restore d2
-	fmovm.x		FP_SCR0(%a6),&0x80	# return result in fp0
-	rts
-
-#
-# operand is to be rounded to double precision
-#
-fin_dbl:
-	mov.w		SRC_EX(%a0),FP_SCR0_EX(%a6)
-	mov.l		SRC_HI(%a0),FP_SCR0_HI(%a6)
-	mov.l		SRC_LO(%a0),FP_SCR0_LO(%a6)
-	bsr.l		scale_to_zero_src	# calculate scale factor
-
-	cmpi.l		%d0,&0x3fff-0x3c00	# will move in underflow?
-	bge.w		fin_sd_unfl		# yes; go handle underflow
-	cmpi.l		%d0,&0x3fff-0x43fe	# will move in overflow?
-	beq.w		fin_sd_may_ovfl		# maybe; go check
-	blt.w		fin_sd_ovfl		# yes; go handle overflow
-	bra.w		fin_sd_normal		# no; ho handle normalized op
-
-#
-# operand WILL underflow when moved in to the fp register file
-#
-fin_sd_unfl:
-	bset		&unfl_bit,FPSR_EXCEPT(%a6) # set unfl exc bit
-
-	tst.b		FP_SCR0_EX(%a6)		# is operand negative?
-	bpl.b		fin_sd_unfl_tst
-	bset		&neg_bit,FPSR_CC(%a6)	# set 'N' ccode bit
-
-# if underflow or inexact is enabled, then go calculate the EXOP first.
-fin_sd_unfl_tst:
-	mov.b		FPCR_ENABLE(%a6),%d1
-	andi.b		&0x0b,%d1		# is UNFL or INEX enabled?
-	bne.b		fin_sd_unfl_ena		# yes
-
-fin_sd_unfl_dis:
-	lea		FP_SCR0(%a6),%a0	# pass: result addr
-	mov.l		L_SCR3(%a6),%d1		# pass: rnd prec,mode
-	bsr.l		unf_res			# calculate default result
-	or.b		%d0,FPSR_CC(%a6)	# unf_res may have set 'Z'
-	fmovm.x		FP_SCR0(%a6),&0x80	# return default result in fp0
-	rts
-
-#
-# operand will underflow AND underflow or inexact is enabled.
-# Therefore, we must return the result rounded to extended precision.
-#
-fin_sd_unfl_ena:
-	mov.l		FP_SCR0_HI(%a6),FP_SCR1_HI(%a6)
-	mov.l		FP_SCR0_LO(%a6),FP_SCR1_LO(%a6)
-	mov.w		FP_SCR0_EX(%a6),%d1	# load current exponent
-
-	mov.l		%d2,-(%sp)		# save d2
-	mov.w		%d1,%d2			# make a copy
-	andi.l		&0x7fff,%d1		# strip sign
-	sub.l		%d0,%d1			# subtract scale factor
-	andi.w		&0x8000,%d2		# extract old sign
-	addi.l		&0x6000,%d1		# add new bias
-	andi.w		&0x7fff,%d1
-	or.w		%d1,%d2			# concat old sign,new exp
-	mov.w		%d2,FP_SCR1_EX(%a6)	# insert new exponent
-	fmovm.x		FP_SCR1(%a6),&0x40	# return EXOP in fp1
-	mov.l		(%sp)+,%d2		# restore d2
-	bra.b		fin_sd_unfl_dis
-
-#
-# operand WILL overflow.
-#
-fin_sd_ovfl:
-	fmov.l		&0x0,%fpsr		# clear FPSR
-	fmov.l		L_SCR3(%a6),%fpcr	# set FPCR
-
-	fmov.x		FP_SCR0(%a6),%fp0	# perform move
-
-	fmov.l		&0x0,%fpcr		# clear FPCR
-	fmov.l		%fpsr,%d1		# save FPSR
-
-	or.l		%d1,USER_FPSR(%a6)	# save INEX2,N
-
-fin_sd_ovfl_tst:
-	or.l		&ovfl_inx_mask,USER_FPSR(%a6) # set ovfl/aovfl/ainex
-
-	mov.b		FPCR_ENABLE(%a6),%d1
-	andi.b		&0x13,%d1		# is OVFL or INEX enabled?
-	bne.b		fin_sd_ovfl_ena		# yes
-
-#
-# OVFL is not enabled; therefore, we must create the default result by
-# calling ovf_res().
-#
-fin_sd_ovfl_dis:
-	btst		&neg_bit,FPSR_CC(%a6)	# is result negative?
-	sne		%d1			# set sign param accordingly
-	mov.l		L_SCR3(%a6),%d0		# pass: prec,mode
-	bsr.l		ovf_res			# calculate default result
-	or.b		%d0,FPSR_CC(%a6)	# set INF,N if applicable
-	fmovm.x		(%a0),&0x80		# return default result in fp0
-	rts
-
-#
-# OVFL is enabled.
-# the INEX2 bit has already been updated by the round to the correct precision.
-# now, round to extended(and don't alter the FPSR).
-#
-fin_sd_ovfl_ena:
-	mov.l		%d2,-(%sp)		# save d2
-	mov.w		FP_SCR0_EX(%a6),%d1	# fetch {sgn,exp}
-	mov.l		%d1,%d2			# make a copy
-	andi.l		&0x7fff,%d1		# strip sign
-	andi.w		&0x8000,%d2		# keep old sign
-	sub.l		%d0,%d1			# add scale factor
-	sub.l		&0x6000,%d1		# subtract bias
-	andi.w		&0x7fff,%d1
-	or.w		%d2,%d1
-	mov.w		%d1,FP_SCR0_EX(%a6)	# insert new exponent
-	mov.l		(%sp)+,%d2		# restore d2
-	fmovm.x		FP_SCR0(%a6),&0x40	# return EXOP in fp1
-	bra.b		fin_sd_ovfl_dis
-
-#
-# the move in MAY overflow. so...
-#
-fin_sd_may_ovfl:
-	fmov.l		&0x0,%fpsr		# clear FPSR
-	fmov.l		L_SCR3(%a6),%fpcr	# set FPCR
-
-	fmov.x		FP_SCR0(%a6),%fp0	# perform the move
-
-	fmov.l		%fpsr,%d1		# save status
-	fmov.l		&0x0,%fpcr		# clear FPCR
-
-	or.l		%d1,USER_FPSR(%a6)	# save INEX2,N
-
-	fabs.x		%fp0,%fp1		# make a copy of result
-	fcmp.b		%fp1,&0x2		# is |result| >= 2.b?
-	fbge.w		fin_sd_ovfl_tst		# yes; overflow has occurred
-
-# no, it didn't overflow; we have correct result
-	bra.w		fin_sd_normal_exit
-
-##########################################################################
-
-#
-# operand is not a NORM: check its optype and branch accordingly
-#
-fin_not_norm:
-	cmpi.b		%d1,&DENORM		# weed out DENORM
-	beq.w		fin_denorm
-	cmpi.b		%d1,&SNAN		# weed out SNANs
-	beq.l		res_snan_1op
-	cmpi.b		%d1,&QNAN		# weed out QNANs
-	beq.l		res_qnan_1op
-
-#
-# do the fmove in; at this point, only possible ops are ZERO and INF.
-# use fmov to determine ccodes.
-# prec:mode should be zero at this point but it won't affect answer anyways.
-#
-	fmov.x		SRC(%a0),%fp0		# do fmove in
-	fmov.l		%fpsr,%d0		# no exceptions possible
-	rol.l		&0x8,%d0		# put ccodes in lo byte
-	mov.b		%d0,FPSR_CC(%a6)	# insert correct ccodes
-	rts
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	fdiv(): emulates the fdiv instruction				#
-#	fsdiv(): emulates the fsdiv instruction				#
-#	fddiv(): emulates the fddiv instruction				#
-#									#
-# XREF ****************************************************************	#
-#	scale_to_zero_src() - scale src exponent to zero		#
-#	scale_to_zero_dst() - scale dst exponent to zero		#
-#	unf_res() - return default underflow result			#
-#	ovf_res() - return default overflow result			#
-#	res_qnan() - return QNAN result					#
-#	res_snan() - return SNAN result					#
-#									#
-# INPUT ***************************************************************	#
-#	a0 = pointer to extended precision source operand		#
-#	a1 = pointer to extended precision destination operand		#
-#	d0  rnd prec,mode						#
-#									#
-# OUTPUT **************************************************************	#
-#	fp0 = result							#
-#	fp1 = EXOP (if exception occurred)				#
-#									#
-# ALGORITHM ***********************************************************	#
-#	Handle NANs, infinities, and zeroes as special cases. Divide	#
-# norms/denorms into ext/sgl/dbl precision.				#
-#	For norms/denorms, scale the exponents such that a divide	#
-# instruction won't cause an exception. Use the regular fdiv to		#
-# compute a result. Check if the regular operands would have taken	#
-# an exception. If so, return the default overflow/underflow result	#
-# and return the EXOP if exceptions are enabled. Else, scale the	#
-# result operand to the proper exponent.				#
-#									#
-#########################################################################
-
-	align		0x10
-tbl_fdiv_unfl:
-	long		0x3fff - 0x0000		# ext_unfl
-	long		0x3fff - 0x3f81		# sgl_unfl
-	long		0x3fff - 0x3c01		# dbl_unfl
-
-tbl_fdiv_ovfl:
-	long		0x3fff - 0x7ffe		# ext overflow exponent
-	long		0x3fff - 0x407e		# sgl overflow exponent
-	long		0x3fff - 0x43fe		# dbl overflow exponent
-
-	global		fsdiv
-fsdiv:
-	andi.b		&0x30,%d0		# clear rnd prec
-	ori.b		&s_mode*0x10,%d0	# insert sgl prec
-	bra.b		fdiv
-
-	global		fddiv
-fddiv:
-	andi.b		&0x30,%d0		# clear rnd prec
-	ori.b		&d_mode*0x10,%d0	# insert dbl prec
-
-	global		fdiv
-fdiv:
-	mov.l		%d0,L_SCR3(%a6)		# store rnd info
-
-	clr.w		%d1
-	mov.b		DTAG(%a6),%d1
-	lsl.b		&0x3,%d1
-	or.b		STAG(%a6),%d1		# combine src tags
-
-	bne.w		fdiv_not_norm		# optimize on non-norm input
-
-#
-# DIVIDE: NORMs and DENORMs ONLY!
-#
-fdiv_norm:
-	mov.w		DST_EX(%a1),FP_SCR1_EX(%a6)
-	mov.l		DST_HI(%a1),FP_SCR1_HI(%a6)
-	mov.l		DST_LO(%a1),FP_SCR1_LO(%a6)
-
-	mov.w		SRC_EX(%a0),FP_SCR0_EX(%a6)
-	mov.l		SRC_HI(%a0),FP_SCR0_HI(%a6)
-	mov.l		SRC_LO(%a0),FP_SCR0_LO(%a6)
-
-	bsr.l		scale_to_zero_src	# scale src exponent
-	mov.l		%d0,-(%sp)		# save scale factor 1
-
-	bsr.l		scale_to_zero_dst	# scale dst exponent
-
-	neg.l		(%sp)			# SCALE FACTOR = scale1 - scale2
-	add.l		%d0,(%sp)
-
-	mov.w		2+L_SCR3(%a6),%d1	# fetch precision
-	lsr.b		&0x6,%d1		# shift to lo bits
-	mov.l		(%sp)+,%d0		# load S.F.
-	cmp.l		%d0,(tbl_fdiv_ovfl.b,%pc,%d1.w*4) # will result overflow?
-	ble.w		fdiv_may_ovfl		# result will overflow
-
-	cmp.l		%d0,(tbl_fdiv_unfl.w,%pc,%d1.w*4) # will result underflow?
-	beq.w		fdiv_may_unfl		# maybe
-	bgt.w		fdiv_unfl		# yes; go handle underflow
-
-fdiv_normal:
-	fmovm.x		FP_SCR1(%a6),&0x80	# load dst op
-
-	fmov.l		L_SCR3(%a6),%fpcr	# save FPCR
-	fmov.l		&0x0,%fpsr		# clear FPSR
-
-	fdiv.x		FP_SCR0(%a6),%fp0	# perform divide
-
-	fmov.l		%fpsr,%d1		# save FPSR
-	fmov.l		&0x0,%fpcr		# clear FPCR
-
-	or.l		%d1,USER_FPSR(%a6)	# save INEX2,N
-
-fdiv_normal_exit:
-	fmovm.x		&0x80,FP_SCR0(%a6)	# store result on stack
-	mov.l		%d2,-(%sp)		# store d2
-	mov.w		FP_SCR0_EX(%a6),%d1	# load {sgn,exp}
-	mov.l		%d1,%d2			# make a copy
-	andi.l		&0x7fff,%d1		# strip sign
-	andi.w		&0x8000,%d2		# keep old sign
-	sub.l		%d0,%d1			# add scale factor
-	or.w		%d2,%d1			# concat old sign,new exp
-	mov.w		%d1,FP_SCR0_EX(%a6)	# insert new exponent
-	mov.l		(%sp)+,%d2		# restore d2
-	fmovm.x		FP_SCR0(%a6),&0x80	# return result in fp0
-	rts
-
-tbl_fdiv_ovfl2:
-	long		0x7fff
-	long		0x407f
-	long		0x43ff
-
-fdiv_no_ovfl:
-	mov.l		(%sp)+,%d0		# restore scale factor
-	bra.b		fdiv_normal_exit
-
-fdiv_may_ovfl:
-	mov.l		%d0,-(%sp)		# save scale factor
-
-	fmovm.x		FP_SCR1(%a6),&0x80	# load dst op
-
-	fmov.l		L_SCR3(%a6),%fpcr	# set FPCR
-	fmov.l		&0x0,%fpsr		# set FPSR
-
-	fdiv.x		FP_SCR0(%a6),%fp0	# execute divide
-
-	fmov.l		%fpsr,%d0
-	fmov.l		&0x0,%fpcr
-
-	or.l		%d0,USER_FPSR(%a6)	# save INEX,N
-
-	fmovm.x		&0x01,-(%sp)		# save result to stack
-	mov.w		(%sp),%d0		# fetch new exponent
-	add.l		&0xc,%sp		# clear result from stack
-	andi.l		&0x7fff,%d0		# strip sign
-	sub.l		(%sp),%d0		# add scale factor
-	cmp.l		%d0,(tbl_fdiv_ovfl2.b,%pc,%d1.w*4)
-	blt.b		fdiv_no_ovfl
-	mov.l		(%sp)+,%d0
-
-fdiv_ovfl_tst:
-	or.l		&ovfl_inx_mask,USER_FPSR(%a6) # set ovfl/aovfl/ainex
-
-	mov.b		FPCR_ENABLE(%a6),%d1
-	andi.b		&0x13,%d1		# is OVFL or INEX enabled?
-	bne.b		fdiv_ovfl_ena		# yes
-
-fdiv_ovfl_dis:
-	btst		&neg_bit,FPSR_CC(%a6)	# is result negative?
-	sne		%d1			# set sign param accordingly
-	mov.l		L_SCR3(%a6),%d0		# pass prec:rnd
-	bsr.l		ovf_res			# calculate default result
-	or.b		%d0,FPSR_CC(%a6)	# set INF if applicable
-	fmovm.x		(%a0),&0x80		# return default result in fp0
-	rts
-
-fdiv_ovfl_ena:
-	mov.l		L_SCR3(%a6),%d1
-	andi.b		&0xc0,%d1		# is precision extended?
-	bne.b		fdiv_ovfl_ena_sd	# no, do sgl or dbl
-
-fdiv_ovfl_ena_cont:
-	fmovm.x		&0x80,FP_SCR0(%a6)	# move result to stack
-
-	mov.l		%d2,-(%sp)		# save d2
-	mov.w		FP_SCR0_EX(%a6),%d1	# fetch {sgn,exp}
-	mov.w		%d1,%d2			# make a copy
-	andi.l		&0x7fff,%d1		# strip sign
-	sub.l		%d0,%d1			# add scale factor
-	subi.l		&0x6000,%d1		# subtract bias
-	andi.w		&0x7fff,%d1		# clear sign bit
-	andi.w		&0x8000,%d2		# keep old sign
-	or.w		%d2,%d1			# concat old sign,new exp
-	mov.w		%d1,FP_SCR0_EX(%a6)	# insert new exponent
-	mov.l		(%sp)+,%d2		# restore d2
-	fmovm.x		FP_SCR0(%a6),&0x40	# return EXOP in fp1
-	bra.b		fdiv_ovfl_dis
-
-fdiv_ovfl_ena_sd:
-	fmovm.x		FP_SCR1(%a6),&0x80	# load dst operand
-
-	mov.l		L_SCR3(%a6),%d1
-	andi.b		&0x30,%d1		# keep rnd mode
-	fmov.l		%d1,%fpcr		# set FPCR
-
-	fdiv.x		FP_SCR0(%a6),%fp0	# execute divide
-
-	fmov.l		&0x0,%fpcr		# clear FPCR
-	bra.b		fdiv_ovfl_ena_cont
-
-fdiv_unfl:
-	bset		&unfl_bit,FPSR_EXCEPT(%a6) # set unfl exc bit
-
-	fmovm.x		FP_SCR1(%a6),&0x80	# load dst op
-
-	fmov.l		&rz_mode*0x10,%fpcr	# set FPCR
-	fmov.l		&0x0,%fpsr		# clear FPSR
-
-	fdiv.x		FP_SCR0(%a6),%fp0	# execute divide
-
-	fmov.l		%fpsr,%d1		# save status
-	fmov.l		&0x0,%fpcr		# clear FPCR
-
-	or.l		%d1,USER_FPSR(%a6)	# save INEX2,N
-
-	mov.b		FPCR_ENABLE(%a6),%d1
-	andi.b		&0x0b,%d1		# is UNFL or INEX enabled?
-	bne.b		fdiv_unfl_ena		# yes
-
-fdiv_unfl_dis:
-	fmovm.x		&0x80,FP_SCR0(%a6)	# store out result
-
-	lea		FP_SCR0(%a6),%a0	# pass: result addr
-	mov.l		L_SCR3(%a6),%d1		# pass: rnd prec,mode
-	bsr.l		unf_res			# calculate default result
-	or.b		%d0,FPSR_CC(%a6)	# 'Z' may have been set
-	fmovm.x		FP_SCR0(%a6),&0x80	# return default result in fp0
-	rts
-
-#
-# UNFL is enabled.
-#
-fdiv_unfl_ena:
-	fmovm.x		FP_SCR1(%a6),&0x40	# load dst op
-
-	mov.l		L_SCR3(%a6),%d1
-	andi.b		&0xc0,%d1		# is precision extended?
-	bne.b		fdiv_unfl_ena_sd	# no, sgl or dbl
-
-	fmov.l		L_SCR3(%a6),%fpcr	# set FPCR
-
-fdiv_unfl_ena_cont:
-	fmov.l		&0x0,%fpsr		# clear FPSR
-
-	fdiv.x		FP_SCR0(%a6),%fp1	# execute divide
-
-	fmov.l		&0x0,%fpcr		# clear FPCR
-
-	fmovm.x		&0x40,FP_SCR0(%a6)	# save result to stack
-	mov.l		%d2,-(%sp)		# save d2
-	mov.w		FP_SCR0_EX(%a6),%d1	# fetch {sgn,exp}
-	mov.l		%d1,%d2			# make a copy
-	andi.l		&0x7fff,%d1		# strip sign
-	andi.w		&0x8000,%d2		# keep old sign
-	sub.l		%d0,%d1			# add scale factoer
-	addi.l		&0x6000,%d1		# add bias
-	andi.w		&0x7fff,%d1
-	or.w		%d2,%d1			# concat old sign,new exp
-	mov.w		%d1,FP_SCR0_EX(%a6)	# insert new exp
-	mov.l		(%sp)+,%d2		# restore d2
-	fmovm.x		FP_SCR0(%a6),&0x40	# return EXOP in fp1
-	bra.w		fdiv_unfl_dis
-
-fdiv_unfl_ena_sd:
-	mov.l		L_SCR3(%a6),%d1
-	andi.b		&0x30,%d1		# use only rnd mode
-	fmov.l		%d1,%fpcr		# set FPCR
-
-	bra.b		fdiv_unfl_ena_cont
-
-#
-# the divide operation MAY underflow:
-#
-fdiv_may_unfl:
-	fmovm.x		FP_SCR1(%a6),&0x80	# load dst op
-
-	fmov.l		L_SCR3(%a6),%fpcr	# set FPCR
-	fmov.l		&0x0,%fpsr		# clear FPSR
-
-	fdiv.x		FP_SCR0(%a6),%fp0	# execute divide
-
-	fmov.l		%fpsr,%d1		# save status
-	fmov.l		&0x0,%fpcr		# clear FPCR
-
-	or.l		%d1,USER_FPSR(%a6)	# save INEX2,N
-
-	fabs.x		%fp0,%fp1		# make a copy of result
-	fcmp.b		%fp1,&0x1		# is |result| > 1.b?
-	fbgt.w		fdiv_normal_exit	# no; no underflow occurred
-	fblt.w		fdiv_unfl		# yes; underflow occurred
-
-#
-# we still don't know if underflow occurred. result is ~ equal to 1. but,
-# we don't know if the result was an underflow that rounded up to a 1
-# or a normalized number that rounded down to a 1. so, redo the entire
-# operation using RZ as the rounding mode to see what the pre-rounded
-# result is. this case should be relatively rare.
-#
-	fmovm.x		FP_SCR1(%a6),&0x40	# load dst op into fp1
-
-	mov.l		L_SCR3(%a6),%d1
-	andi.b		&0xc0,%d1		# keep rnd prec
-	ori.b		&rz_mode*0x10,%d1	# insert RZ
-
-	fmov.l		%d1,%fpcr		# set FPCR
-	fmov.l		&0x0,%fpsr		# clear FPSR
-
-	fdiv.x		FP_SCR0(%a6),%fp1	# execute divide
-
-	fmov.l		&0x0,%fpcr		# clear FPCR
-	fabs.x		%fp1			# make absolute value
-	fcmp.b		%fp1,&0x1		# is |result| < 1.b?
-	fbge.w		fdiv_normal_exit	# no; no underflow occurred
-	bra.w		fdiv_unfl		# yes; underflow occurred
-
-############################################################################
-
-#
-# Divide: inputs are not both normalized; what are they?
-#
-fdiv_not_norm:
-	mov.w		(tbl_fdiv_op.b,%pc,%d1.w*2),%d1
-	jmp		(tbl_fdiv_op.b,%pc,%d1.w*1)
-
-	swbeg		&48
-tbl_fdiv_op:
-	short		fdiv_norm	- tbl_fdiv_op # NORM / NORM
-	short		fdiv_inf_load	- tbl_fdiv_op # NORM / ZERO
-	short		fdiv_zero_load	- tbl_fdiv_op # NORM / INF
-	short		fdiv_res_qnan	- tbl_fdiv_op # NORM / QNAN
-	short		fdiv_norm	- tbl_fdiv_op # NORM / DENORM
-	short		fdiv_res_snan	- tbl_fdiv_op # NORM / SNAN
-	short		tbl_fdiv_op	- tbl_fdiv_op #
-	short		tbl_fdiv_op	- tbl_fdiv_op #
-
-	short		fdiv_zero_load	- tbl_fdiv_op # ZERO / NORM
-	short		fdiv_res_operr	- tbl_fdiv_op # ZERO / ZERO
-	short		fdiv_zero_load	- tbl_fdiv_op # ZERO / INF
-	short		fdiv_res_qnan	- tbl_fdiv_op # ZERO / QNAN
-	short		fdiv_zero_load	- tbl_fdiv_op # ZERO / DENORM
-	short		fdiv_res_snan	- tbl_fdiv_op # ZERO / SNAN
-	short		tbl_fdiv_op	- tbl_fdiv_op #
-	short		tbl_fdiv_op	- tbl_fdiv_op #
-
-	short		fdiv_inf_dst	- tbl_fdiv_op # INF / NORM
-	short		fdiv_inf_dst	- tbl_fdiv_op # INF / ZERO
-	short		fdiv_res_operr	- tbl_fdiv_op # INF / INF
-	short		fdiv_res_qnan	- tbl_fdiv_op # INF / QNAN
-	short		fdiv_inf_dst	- tbl_fdiv_op # INF / DENORM
-	short		fdiv_res_snan	- tbl_fdiv_op # INF / SNAN
-	short		tbl_fdiv_op	- tbl_fdiv_op #
-	short		tbl_fdiv_op	- tbl_fdiv_op #
-
-	short		fdiv_res_qnan	- tbl_fdiv_op # QNAN / NORM
-	short		fdiv_res_qnan	- tbl_fdiv_op # QNAN / ZERO
-	short		fdiv_res_qnan	- tbl_fdiv_op # QNAN / INF
-	short		fdiv_res_qnan	- tbl_fdiv_op # QNAN / QNAN
-	short		fdiv_res_qnan	- tbl_fdiv_op # QNAN / DENORM
-	short		fdiv_res_snan	- tbl_fdiv_op # QNAN / SNAN
-	short		tbl_fdiv_op	- tbl_fdiv_op #
-	short		tbl_fdiv_op	- tbl_fdiv_op #
-
-	short		fdiv_norm	- tbl_fdiv_op # DENORM / NORM
-	short		fdiv_inf_load	- tbl_fdiv_op # DENORM / ZERO
-	short		fdiv_zero_load	- tbl_fdiv_op # DENORM / INF
-	short		fdiv_res_qnan	- tbl_fdiv_op # DENORM / QNAN
-	short		fdiv_norm	- tbl_fdiv_op # DENORM / DENORM
-	short		fdiv_res_snan	- tbl_fdiv_op # DENORM / SNAN
-	short		tbl_fdiv_op	- tbl_fdiv_op #
-	short		tbl_fdiv_op	- tbl_fdiv_op #
-
-	short		fdiv_res_snan	- tbl_fdiv_op # SNAN / NORM
-	short		fdiv_res_snan	- tbl_fdiv_op # SNAN / ZERO
-	short		fdiv_res_snan	- tbl_fdiv_op # SNAN / INF
-	short		fdiv_res_snan	- tbl_fdiv_op # SNAN / QNAN
-	short		fdiv_res_snan	- tbl_fdiv_op # SNAN / DENORM
-	short		fdiv_res_snan	- tbl_fdiv_op # SNAN / SNAN
-	short		tbl_fdiv_op	- tbl_fdiv_op #
-	short		tbl_fdiv_op	- tbl_fdiv_op #
-
-fdiv_res_qnan:
-	bra.l		res_qnan
-fdiv_res_snan:
-	bra.l		res_snan
-fdiv_res_operr:
-	bra.l		res_operr
-
-	global		fdiv_zero_load		# global for fsgldiv
-fdiv_zero_load:
-	mov.b		SRC_EX(%a0),%d0		# result sign is exclusive
-	mov.b		DST_EX(%a1),%d1		# or of input signs.
-	eor.b		%d0,%d1
-	bpl.b		fdiv_zero_load_p	# result is positive
-	fmov.s		&0x80000000,%fp0	# load a -ZERO
-	mov.b		&z_bmask+neg_bmask,FPSR_CC(%a6)	# set Z/N
-	rts
-fdiv_zero_load_p:
-	fmov.s		&0x00000000,%fp0	# load a +ZERO
-	mov.b		&z_bmask,FPSR_CC(%a6)	# set Z
-	rts
-
-#
-# The destination was In Range and the source was a ZERO. The result,
-# Therefore, is an INF w/ the proper sign.
-# So, determine the sign and return a new INF (w/ the j-bit cleared).
-#
-	global		fdiv_inf_load		# global for fsgldiv
-fdiv_inf_load:
-	ori.w		&dz_mask+adz_mask,2+USER_FPSR(%a6) # no; set DZ/ADZ
-	mov.b		SRC_EX(%a0),%d0		# load both signs
-	mov.b		DST_EX(%a1),%d1
-	eor.b		%d0,%d1
-	bpl.b		fdiv_inf_load_p		# result is positive
-	fmov.s		&0xff800000,%fp0	# make result -INF
-	mov.b		&inf_bmask+neg_bmask,FPSR_CC(%a6) # set INF/N
-	rts
-fdiv_inf_load_p:
-	fmov.s		&0x7f800000,%fp0	# make result +INF
-	mov.b		&inf_bmask,FPSR_CC(%a6)	# set INF
-	rts
-
-#
-# The destination was an INF w/ an In Range or ZERO source, the result is
-# an INF w/ the proper sign.
-# The 68881/882 returns the destination INF w/ the new sign(if the j-bit of the
-# dst INF is set, then then j-bit of the result INF is also set).
-#
-	global		fdiv_inf_dst		# global for fsgldiv
-fdiv_inf_dst:
-	mov.b		DST_EX(%a1),%d0		# load both signs
-	mov.b		SRC_EX(%a0),%d1
-	eor.b		%d0,%d1
-	bpl.b		fdiv_inf_dst_p		# result is positive
-
-	fmovm.x		DST(%a1),&0x80		# return result in fp0
-	fabs.x		%fp0			# clear sign bit
-	fneg.x		%fp0			# set sign bit
-	mov.b		&inf_bmask+neg_bmask,FPSR_CC(%a6) # set INF/NEG
-	rts
-
-fdiv_inf_dst_p:
-	fmovm.x		DST(%a1),&0x80		# return result in fp0
-	fabs.x		%fp0			# return positive INF
-	mov.b		&inf_bmask,FPSR_CC(%a6) # set INF
-	rts
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	fneg(): emulates the fneg instruction				#
-#	fsneg(): emulates the fsneg instruction				#
-#	fdneg(): emulates the fdneg instruction				#
-#									#
-# XREF ****************************************************************	#
-#	norm() - normalize a denorm to provide EXOP			#
-#	scale_to_zero_src() - scale sgl/dbl source exponent		#
-#	ovf_res() - return default overflow result			#
-#	unf_res() - return default underflow result			#
-#	res_qnan_1op() - return QNAN result				#
-#	res_snan_1op() - return SNAN result				#
-#									#
-# INPUT ***************************************************************	#
-#	a0 = pointer to extended precision source operand		#
-#	d0 = rnd prec,mode						#
-#									#
-# OUTPUT **************************************************************	#
-#	fp0 = result							#
-#	fp1 = EXOP (if exception occurred)				#
-#									#
-# ALGORITHM ***********************************************************	#
-#	Handle NANs, zeroes, and infinities as special cases. Separate	#
-# norms/denorms into ext/sgl/dbl precisions. Extended precision can be	#
-# emulated by simply setting sign bit. Sgl/dbl operands must be scaled	#
-# and an actual fneg performed to see if overflow/underflow would have	#
-# occurred. If so, return default underflow/overflow result. Else,	#
-# scale the result exponent and return result. FPSR gets set based on	#
-# the result value.							#
-#									#
-#########################################################################
-
-	global		fsneg
-fsneg:
-	andi.b		&0x30,%d0		# clear rnd prec
-	ori.b		&s_mode*0x10,%d0	# insert sgl precision
-	bra.b		fneg
-
-	global		fdneg
-fdneg:
-	andi.b		&0x30,%d0		# clear rnd prec
-	ori.b		&d_mode*0x10,%d0	# insert dbl prec
-
-	global		fneg
-fneg:
-	mov.l		%d0,L_SCR3(%a6)		# store rnd info
-	mov.b		STAG(%a6),%d1
-	bne.w		fneg_not_norm		# optimize on non-norm input
-
-#
-# NEGATE SIGN : norms and denorms ONLY!
-#
-fneg_norm:
-	andi.b		&0xc0,%d0		# is precision extended?
-	bne.w		fneg_not_ext		# no; go handle sgl or dbl
-
-#
-# precision selected is extended. so...we can not get an underflow
-# or overflow because of rounding to the correct precision. so...
-# skip the scaling and unscaling...
-#
-	mov.l		SRC_HI(%a0),FP_SCR0_HI(%a6)
-	mov.l		SRC_LO(%a0),FP_SCR0_LO(%a6)
-	mov.w		SRC_EX(%a0),%d0
-	eori.w		&0x8000,%d0		# negate sign
-	bpl.b		fneg_norm_load		# sign is positive
-	mov.b		&neg_bmask,FPSR_CC(%a6)	# set 'N' ccode bit
-fneg_norm_load:
-	mov.w		%d0,FP_SCR0_EX(%a6)
-	fmovm.x		FP_SCR0(%a6),&0x80	# return result in fp0
-	rts
-
-#
-# for an extended precision DENORM, the UNFL exception bit is set
-# the accrued bit is NOT set in this instance(no inexactness!)
-#
-fneg_denorm:
-	andi.b		&0xc0,%d0		# is precision extended?
-	bne.b		fneg_not_ext		# no; go handle sgl or dbl
-
-	bset		&unfl_bit,FPSR_EXCEPT(%a6) # set unfl exc bit
-
-	mov.l		SRC_HI(%a0),FP_SCR0_HI(%a6)
-	mov.l		SRC_LO(%a0),FP_SCR0_LO(%a6)
-	mov.w		SRC_EX(%a0),%d0
-	eori.w		&0x8000,%d0		# negate sign
-	bpl.b		fneg_denorm_done	# no
-	mov.b		&neg_bmask,FPSR_CC(%a6)	# yes, set 'N' ccode bit
-fneg_denorm_done:
-	mov.w		%d0,FP_SCR0_EX(%a6)
-	fmovm.x		FP_SCR0(%a6),&0x80	# return default result in fp0
-
-	btst		&unfl_bit,FPCR_ENABLE(%a6) # is UNFL enabled?
-	bne.b		fneg_ext_unfl_ena	# yes
-	rts
-
-#
-# the input is an extended DENORM and underflow is enabled in the FPCR.
-# normalize the mantissa and add the bias of 0x6000 to the resulting negative
-# exponent and insert back into the operand.
-#
-fneg_ext_unfl_ena:
-	lea		FP_SCR0(%a6),%a0	# pass: ptr to operand
-	bsr.l		norm			# normalize result
-	neg.w		%d0			# new exponent = -(shft val)
-	addi.w		&0x6000,%d0		# add new bias to exponent
-	mov.w		FP_SCR0_EX(%a6),%d1	# fetch old sign,exp
-	andi.w		&0x8000,%d1		# keep old sign
-	andi.w		&0x7fff,%d0		# clear sign position
-	or.w		%d1,%d0			# concat old sign, new exponent
-	mov.w		%d0,FP_SCR0_EX(%a6)	# insert new exponent
-	fmovm.x		FP_SCR0(%a6),&0x40	# return EXOP in fp1
-	rts
-
-#
-# operand is either single or double
-#
-fneg_not_ext:
-	cmpi.b		%d0,&s_mode*0x10	# separate sgl/dbl prec
-	bne.b		fneg_dbl
-
-#
-# operand is to be rounded to single precision
-#
-fneg_sgl:
-	mov.w		SRC_EX(%a0),FP_SCR0_EX(%a6)
-	mov.l		SRC_HI(%a0),FP_SCR0_HI(%a6)
-	mov.l		SRC_LO(%a0),FP_SCR0_LO(%a6)
-	bsr.l		scale_to_zero_src	# calculate scale factor
-
-	cmpi.l		%d0,&0x3fff-0x3f80	# will move in underflow?
-	bge.w		fneg_sd_unfl		# yes; go handle underflow
-	cmpi.l		%d0,&0x3fff-0x407e	# will move in overflow?
-	beq.w		fneg_sd_may_ovfl	# maybe; go check
-	blt.w		fneg_sd_ovfl		# yes; go handle overflow
-
-#
-# operand will NOT overflow or underflow when moved in to the fp reg file
-#
-fneg_sd_normal:
-	fmov.l		&0x0,%fpsr		# clear FPSR
-	fmov.l		L_SCR3(%a6),%fpcr	# set FPCR
-
-	fneg.x		FP_SCR0(%a6),%fp0	# perform negation
-
-	fmov.l		%fpsr,%d1		# save FPSR
-	fmov.l		&0x0,%fpcr		# clear FPCR
-
-	or.l		%d1,USER_FPSR(%a6)	# save INEX2,N
-
-fneg_sd_normal_exit:
-	mov.l		%d2,-(%sp)		# save d2
-	fmovm.x		&0x80,FP_SCR0(%a6)	# store out result
-	mov.w		FP_SCR0_EX(%a6),%d1	# load sgn,exp
-	mov.w		%d1,%d2			# make a copy
-	andi.l		&0x7fff,%d1		# strip sign
-	sub.l		%d0,%d1			# add scale factor
-	andi.w		&0x8000,%d2		# keep old sign
-	or.w		%d1,%d2			# concat old sign,new exp
-	mov.w		%d2,FP_SCR0_EX(%a6)	# insert new exponent
-	mov.l		(%sp)+,%d2		# restore d2
-	fmovm.x		FP_SCR0(%a6),&0x80	# return result in fp0
-	rts
-
-#
-# operand is to be rounded to double precision
-#
-fneg_dbl:
-	mov.w		SRC_EX(%a0),FP_SCR0_EX(%a6)
-	mov.l		SRC_HI(%a0),FP_SCR0_HI(%a6)
-	mov.l		SRC_LO(%a0),FP_SCR0_LO(%a6)
-	bsr.l		scale_to_zero_src	# calculate scale factor
-
-	cmpi.l		%d0,&0x3fff-0x3c00	# will move in underflow?
-	bge.b		fneg_sd_unfl		# yes; go handle underflow
-	cmpi.l		%d0,&0x3fff-0x43fe	# will move in overflow?
-	beq.w		fneg_sd_may_ovfl	# maybe; go check
-	blt.w		fneg_sd_ovfl		# yes; go handle overflow
-	bra.w		fneg_sd_normal		# no; ho handle normalized op
-
-#
-# operand WILL underflow when moved in to the fp register file
-#
-fneg_sd_unfl:
-	bset		&unfl_bit,FPSR_EXCEPT(%a6) # set unfl exc bit
-
-	eori.b		&0x80,FP_SCR0_EX(%a6)	# negate sign
-	bpl.b		fneg_sd_unfl_tst
-	bset		&neg_bit,FPSR_CC(%a6)	# set 'N' ccode bit
-
-# if underflow or inexact is enabled, go calculate EXOP first.
-fneg_sd_unfl_tst:
-	mov.b		FPCR_ENABLE(%a6),%d1
-	andi.b		&0x0b,%d1		# is UNFL or INEX enabled?
-	bne.b		fneg_sd_unfl_ena	# yes
-
-fneg_sd_unfl_dis:
-	lea		FP_SCR0(%a6),%a0	# pass: result addr
-	mov.l		L_SCR3(%a6),%d1		# pass: rnd prec,mode
-	bsr.l		unf_res			# calculate default result
-	or.b		%d0,FPSR_CC(%a6)	# unf_res may have set 'Z'
-	fmovm.x		FP_SCR0(%a6),&0x80	# return default result in fp0
-	rts
-
-#
-# operand will underflow AND underflow is enabled.
-# Therefore, we must return the result rounded to extended precision.
-#
-fneg_sd_unfl_ena:
-	mov.l		FP_SCR0_HI(%a6),FP_SCR1_HI(%a6)
-	mov.l		FP_SCR0_LO(%a6),FP_SCR1_LO(%a6)
-	mov.w		FP_SCR0_EX(%a6),%d1	# load current exponent
-
-	mov.l		%d2,-(%sp)		# save d2
-	mov.l		%d1,%d2			# make a copy
-	andi.l		&0x7fff,%d1		# strip sign
-	andi.w		&0x8000,%d2		# keep old sign
-	sub.l		%d0,%d1			# subtract scale factor
-	addi.l		&0x6000,%d1		# add new bias
-	andi.w		&0x7fff,%d1
-	or.w		%d2,%d1			# concat new sign,new exp
-	mov.w		%d1,FP_SCR1_EX(%a6)	# insert new exp
-	fmovm.x		FP_SCR1(%a6),&0x40	# return EXOP in fp1
-	mov.l		(%sp)+,%d2		# restore d2
-	bra.b		fneg_sd_unfl_dis
-
-#
-# operand WILL overflow.
-#
-fneg_sd_ovfl:
-	fmov.l		&0x0,%fpsr		# clear FPSR
-	fmov.l		L_SCR3(%a6),%fpcr	# set FPCR
-
-	fneg.x		FP_SCR0(%a6),%fp0	# perform negation
-
-	fmov.l		&0x0,%fpcr		# clear FPCR
-	fmov.l		%fpsr,%d1		# save FPSR
-
-	or.l		%d1,USER_FPSR(%a6)	# save INEX2,N
-
-fneg_sd_ovfl_tst:
-	or.l		&ovfl_inx_mask,USER_FPSR(%a6) # set ovfl/aovfl/ainex
-
-	mov.b		FPCR_ENABLE(%a6),%d1
-	andi.b		&0x13,%d1		# is OVFL or INEX enabled?
-	bne.b		fneg_sd_ovfl_ena	# yes
-
-#
-# OVFL is not enabled; therefore, we must create the default result by
-# calling ovf_res().
-#
-fneg_sd_ovfl_dis:
-	btst		&neg_bit,FPSR_CC(%a6)	# is result negative?
-	sne		%d1			# set sign param accordingly
-	mov.l		L_SCR3(%a6),%d0		# pass: prec,mode
-	bsr.l		ovf_res			# calculate default result
-	or.b		%d0,FPSR_CC(%a6)	# set INF,N if applicable
-	fmovm.x		(%a0),&0x80		# return default result in fp0
-	rts
-
-#
-# OVFL is enabled.
-# the INEX2 bit has already been updated by the round to the correct precision.
-# now, round to extended(and don't alter the FPSR).
-#
-fneg_sd_ovfl_ena:
-	mov.l		%d2,-(%sp)		# save d2
-	mov.w		FP_SCR0_EX(%a6),%d1	# fetch {sgn,exp}
-	mov.l		%d1,%d2			# make a copy
-	andi.l		&0x7fff,%d1		# strip sign
-	andi.w		&0x8000,%d2		# keep old sign
-	sub.l		%d0,%d1			# add scale factor
-	subi.l		&0x6000,%d1		# subtract bias
-	andi.w		&0x7fff,%d1
-	or.w		%d2,%d1			# concat sign,exp
-	mov.w		%d1,FP_SCR0_EX(%a6)	# insert new exponent
-	fmovm.x		FP_SCR0(%a6),&0x40	# return EXOP in fp1
-	mov.l		(%sp)+,%d2		# restore d2
-	bra.b		fneg_sd_ovfl_dis
-
-#
-# the move in MAY underflow. so...
-#
-fneg_sd_may_ovfl:
-	fmov.l		&0x0,%fpsr		# clear FPSR
-	fmov.l		L_SCR3(%a6),%fpcr	# set FPCR
-
-	fneg.x		FP_SCR0(%a6),%fp0	# perform negation
-
-	fmov.l		%fpsr,%d1		# save status
-	fmov.l		&0x0,%fpcr		# clear FPCR
-
-	or.l		%d1,USER_FPSR(%a6)	# save INEX2,N
-
-	fabs.x		%fp0,%fp1		# make a copy of result
-	fcmp.b		%fp1,&0x2		# is |result| >= 2.b?
-	fbge.w		fneg_sd_ovfl_tst	# yes; overflow has occurred
-
-# no, it didn't overflow; we have correct result
-	bra.w		fneg_sd_normal_exit
-
-##########################################################################
-
-#
-# input is not normalized; what is it?
-#
-fneg_not_norm:
-	cmpi.b		%d1,&DENORM		# weed out DENORM
-	beq.w		fneg_denorm
-	cmpi.b		%d1,&SNAN		# weed out SNAN
-	beq.l		res_snan_1op
-	cmpi.b		%d1,&QNAN		# weed out QNAN
-	beq.l		res_qnan_1op
-
-#
-# do the fneg; at this point, only possible ops are ZERO and INF.
-# use fneg to determine ccodes.
-# prec:mode should be zero at this point but it won't affect answer anyways.
-#
-	fneg.x		SRC_EX(%a0),%fp0	# do fneg
-	fmov.l		%fpsr,%d0
-	rol.l		&0x8,%d0		# put ccodes in lo byte
-	mov.b		%d0,FPSR_CC(%a6)	# insert correct ccodes
-	rts
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	ftst(): emulates the ftest instruction				#
-#									#
-# XREF ****************************************************************	#
-#	res{s,q}nan_1op() - set NAN result for monadic instruction	#
-#									#
-# INPUT ***************************************************************	#
-#	a0 = pointer to extended precision source operand		#
-#									#
-# OUTPUT **************************************************************	#
-#	none								#
-#									#
-# ALGORITHM ***********************************************************	#
-#	Check the source operand tag (STAG) and set the FPCR according	#
-# to the operand type and sign.						#
-#									#
-#########################################################################
-
-	global		ftst
-ftst:
-	mov.b		STAG(%a6),%d1
-	bne.b		ftst_not_norm		# optimize on non-norm input
-
-#
-# Norm:
-#
-ftst_norm:
-	tst.b		SRC_EX(%a0)		# is operand negative?
-	bmi.b		ftst_norm_m		# yes
-	rts
-ftst_norm_m:
-	mov.b		&neg_bmask,FPSR_CC(%a6)	# set 'N' ccode bit
-	rts
-
-#
-# input is not normalized; what is it?
-#
-ftst_not_norm:
-	cmpi.b		%d1,&ZERO		# weed out ZERO
-	beq.b		ftst_zero
-	cmpi.b		%d1,&INF		# weed out INF
-	beq.b		ftst_inf
-	cmpi.b		%d1,&SNAN		# weed out SNAN
-	beq.l		res_snan_1op
-	cmpi.b		%d1,&QNAN		# weed out QNAN
-	beq.l		res_qnan_1op
-
-#
-# Denorm:
-#
-ftst_denorm:
-	tst.b		SRC_EX(%a0)		# is operand negative?
-	bmi.b		ftst_denorm_m		# yes
-	rts
-ftst_denorm_m:
-	mov.b		&neg_bmask,FPSR_CC(%a6)	# set 'N' ccode bit
-	rts
-
-#
-# Infinity:
-#
-ftst_inf:
-	tst.b		SRC_EX(%a0)		# is operand negative?
-	bmi.b		ftst_inf_m		# yes
-ftst_inf_p:
-	mov.b		&inf_bmask,FPSR_CC(%a6)	# set 'I' ccode bit
-	rts
-ftst_inf_m:
-	mov.b		&inf_bmask+neg_bmask,FPSR_CC(%a6) # set 'I','N' ccode bits
-	rts
-
-#
-# Zero:
-#
-ftst_zero:
-	tst.b		SRC_EX(%a0)		# is operand negative?
-	bmi.b		ftst_zero_m		# yes
-ftst_zero_p:
-	mov.b		&z_bmask,FPSR_CC(%a6)	# set 'N' ccode bit
-	rts
-ftst_zero_m:
-	mov.b		&z_bmask+neg_bmask,FPSR_CC(%a6)	# set 'Z','N' ccode bits
-	rts
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	fint(): emulates the fint instruction				#
-#									#
-# XREF ****************************************************************	#
-#	res_{s,q}nan_1op() - set NAN result for monadic operation	#
-#									#
-# INPUT ***************************************************************	#
-#	a0 = pointer to extended precision source operand		#
-#	d0 = round precision/mode					#
-#									#
-# OUTPUT **************************************************************	#
-#	fp0 = result							#
-#									#
-# ALGORITHM ***********************************************************	#
-#	Separate according to operand type. Unnorms don't pass through	#
-# here. For norms, load the rounding mode/prec, execute a "fint", then	#
-# store the resulting FPSR bits.					#
-#	For denorms, force the j-bit to a one and do the same as for	#
-# norms. Denorms are so low that the answer will either be a zero or a	#
-# one.									#
-#	For zeroes/infs/NANs, return the same while setting the FPSR	#
-# as appropriate.							#
-#									#
-#########################################################################
-
-	global		fint
-fint:
-	mov.b		STAG(%a6),%d1
-	bne.b		fint_not_norm		# optimize on non-norm input
-
-#
-# Norm:
-#
-fint_norm:
-	andi.b		&0x30,%d0		# set prec = ext
-
-	fmov.l		%d0,%fpcr		# set FPCR
-	fmov.l		&0x0,%fpsr		# clear FPSR
-
-	fint.x		SRC(%a0),%fp0		# execute fint
-
-	fmov.l		&0x0,%fpcr		# clear FPCR
-	fmov.l		%fpsr,%d0		# save FPSR
-	or.l		%d0,USER_FPSR(%a6)	# set exception bits
-
-	rts
-
-#
-# input is not normalized; what is it?
-#
-fint_not_norm:
-	cmpi.b		%d1,&ZERO		# weed out ZERO
-	beq.b		fint_zero
-	cmpi.b		%d1,&INF		# weed out INF
-	beq.b		fint_inf
-	cmpi.b		%d1,&DENORM		# weed out DENORM
-	beq.b		fint_denorm
-	cmpi.b		%d1,&SNAN		# weed out SNAN
-	beq.l		res_snan_1op
-	bra.l		res_qnan_1op		# weed out QNAN
-
-#
-# Denorm:
-#
-# for DENORMs, the result will be either (+/-)ZERO or (+/-)1.
-# also, the INEX2 and AINEX exception bits will be set.
-# so, we could either set these manually or force the DENORM
-# to a very small NORM and ship it to the NORM routine.
-# I do the latter.
-#
-fint_denorm:
-	mov.w		SRC_EX(%a0),FP_SCR0_EX(%a6) # copy sign, zero exp
-	mov.b		&0x80,FP_SCR0_HI(%a6)	# force DENORM ==> small NORM
-	lea		FP_SCR0(%a6),%a0
-	bra.b		fint_norm
-
-#
-# Zero:
-#
-fint_zero:
-	tst.b		SRC_EX(%a0)		# is ZERO negative?
-	bmi.b		fint_zero_m		# yes
-fint_zero_p:
-	fmov.s		&0x00000000,%fp0	# return +ZERO in fp0
-	mov.b		&z_bmask,FPSR_CC(%a6)	# set 'Z' ccode bit
-	rts
-fint_zero_m:
-	fmov.s		&0x80000000,%fp0	# return -ZERO in fp0
-	mov.b		&z_bmask+neg_bmask,FPSR_CC(%a6) # set 'Z','N' ccode bits
-	rts
-
-#
-# Infinity:
-#
-fint_inf:
-	fmovm.x		SRC(%a0),&0x80		# return result in fp0
-	tst.b		SRC_EX(%a0)		# is INF negative?
-	bmi.b		fint_inf_m		# yes
-fint_inf_p:
-	mov.b		&inf_bmask,FPSR_CC(%a6)	# set 'I' ccode bit
-	rts
-fint_inf_m:
-	mov.b		&inf_bmask+neg_bmask,FPSR_CC(%a6) # set 'N','I' ccode bits
-	rts
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	fintrz(): emulates the fintrz instruction			#
-#									#
-# XREF ****************************************************************	#
-#	res_{s,q}nan_1op() - set NAN result for monadic operation	#
-#									#
-# INPUT ***************************************************************	#
-#	a0 = pointer to extended precision source operand		#
-#	d0 = round precision/mode					#
-#									#
-# OUTPUT **************************************************************	#
-#	fp0 = result							#
-#									#
-# ALGORITHM ***********************************************************	#
-#	Separate according to operand type. Unnorms don't pass through	#
-# here. For norms, load the rounding mode/prec, execute a "fintrz",	#
-# then store the resulting FPSR bits.					#
-#	For denorms, force the j-bit to a one and do the same as for	#
-# norms. Denorms are so low that the answer will either be a zero or a	#
-# one.									#
-#	For zeroes/infs/NANs, return the same while setting the FPSR	#
-# as appropriate.							#
-#									#
-#########################################################################
-
-	global		fintrz
-fintrz:
-	mov.b		STAG(%a6),%d1
-	bne.b		fintrz_not_norm		# optimize on non-norm input
-
-#
-# Norm:
-#
-fintrz_norm:
-	fmov.l		&0x0,%fpsr		# clear FPSR
-
-	fintrz.x	SRC(%a0),%fp0		# execute fintrz
-
-	fmov.l		%fpsr,%d0		# save FPSR
-	or.l		%d0,USER_FPSR(%a6)	# set exception bits
-
-	rts
-
-#
-# input is not normalized; what is it?
-#
-fintrz_not_norm:
-	cmpi.b		%d1,&ZERO		# weed out ZERO
-	beq.b		fintrz_zero
-	cmpi.b		%d1,&INF		# weed out INF
-	beq.b		fintrz_inf
-	cmpi.b		%d1,&DENORM		# weed out DENORM
-	beq.b		fintrz_denorm
-	cmpi.b		%d1,&SNAN		# weed out SNAN
-	beq.l		res_snan_1op
-	bra.l		res_qnan_1op		# weed out QNAN
-
-#
-# Denorm:
-#
-# for DENORMs, the result will be (+/-)ZERO.
-# also, the INEX2 and AINEX exception bits will be set.
-# so, we could either set these manually or force the DENORM
-# to a very small NORM and ship it to the NORM routine.
-# I do the latter.
-#
-fintrz_denorm:
-	mov.w		SRC_EX(%a0),FP_SCR0_EX(%a6) # copy sign, zero exp
-	mov.b		&0x80,FP_SCR0_HI(%a6)	# force DENORM ==> small NORM
-	lea		FP_SCR0(%a6),%a0
-	bra.b		fintrz_norm
-
-#
-# Zero:
-#
-fintrz_zero:
-	tst.b		SRC_EX(%a0)		# is ZERO negative?
-	bmi.b		fintrz_zero_m		# yes
-fintrz_zero_p:
-	fmov.s		&0x00000000,%fp0	# return +ZERO in fp0
-	mov.b		&z_bmask,FPSR_CC(%a6)	# set 'Z' ccode bit
-	rts
-fintrz_zero_m:
-	fmov.s		&0x80000000,%fp0	# return -ZERO in fp0
-	mov.b		&z_bmask+neg_bmask,FPSR_CC(%a6) # set 'Z','N' ccode bits
-	rts
-
-#
-# Infinity:
-#
-fintrz_inf:
-	fmovm.x		SRC(%a0),&0x80		# return result in fp0
-	tst.b		SRC_EX(%a0)		# is INF negative?
-	bmi.b		fintrz_inf_m		# yes
-fintrz_inf_p:
-	mov.b		&inf_bmask,FPSR_CC(%a6)	# set 'I' ccode bit
-	rts
-fintrz_inf_m:
-	mov.b		&inf_bmask+neg_bmask,FPSR_CC(%a6) # set 'N','I' ccode bits
-	rts
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	fabs():  emulates the fabs instruction				#
-#	fsabs(): emulates the fsabs instruction				#
-#	fdabs(): emulates the fdabs instruction				#
-#									#
-# XREF **************************************************************** #
-#	norm() - normalize denorm mantissa to provide EXOP		#
-#	scale_to_zero_src() - make exponent. = 0; get scale factor	#
-#	unf_res() - calculate underflow result				#
-#	ovf_res() - calculate overflow result				#
-#	res_{s,q}nan_1op() - set NAN result for monadic operation	#
-#									#
-# INPUT *************************************************************** #
-#	a0 = pointer to extended precision source operand		#
-#	d0 = rnd precision/mode						#
-#									#
-# OUTPUT ************************************************************** #
-#	fp0 = result							#
-#	fp1 = EXOP (if exception occurred)				#
-#									#
-# ALGORITHM ***********************************************************	#
-#	Handle NANs, infinities, and zeroes as special cases. Divide	#
-# norms into extended, single, and double precision.			#
-#	Simply clear sign for extended precision norm. Ext prec denorm	#
-# gets an EXOP created for it since it's an underflow.			#
-#	Double and single precision can overflow and underflow. First,	#
-# scale the operand such that the exponent is zero. Perform an "fabs"	#
-# using the correct rnd mode/prec. Check to see if the original		#
-# exponent would take an exception. If so, use unf_res() or ovf_res()	#
-# to calculate the default result. Also, create the EXOP for the	#
-# exceptional case. If no exception should occur, insert the correct	#
-# result exponent and return.						#
-#	Unnorms don't pass through here.				#
-#									#
-#########################################################################
-
-	global		fsabs
-fsabs:
-	andi.b		&0x30,%d0		# clear rnd prec
-	ori.b		&s_mode*0x10,%d0	# insert sgl precision
-	bra.b		fabs
-
-	global		fdabs
-fdabs:
-	andi.b		&0x30,%d0		# clear rnd prec
-	ori.b		&d_mode*0x10,%d0	# insert dbl precision
-
-	global		fabs
-fabs:
-	mov.l		%d0,L_SCR3(%a6)		# store rnd info
-	mov.b		STAG(%a6),%d1
-	bne.w		fabs_not_norm		# optimize on non-norm input
-
-#
-# ABSOLUTE VALUE: norms and denorms ONLY!
-#
-fabs_norm:
-	andi.b		&0xc0,%d0		# is precision extended?
-	bne.b		fabs_not_ext		# no; go handle sgl or dbl
-
-#
-# precision selected is extended. so...we can not get an underflow
-# or overflow because of rounding to the correct precision. so...
-# skip the scaling and unscaling...
-#
-	mov.l		SRC_HI(%a0),FP_SCR0_HI(%a6)
-	mov.l		SRC_LO(%a0),FP_SCR0_LO(%a6)
-	mov.w		SRC_EX(%a0),%d1
-	bclr		&15,%d1			# force absolute value
-	mov.w		%d1,FP_SCR0_EX(%a6)	# insert exponent
-	fmovm.x		FP_SCR0(%a6),&0x80	# return result in fp0
-	rts
-
-#
-# for an extended precision DENORM, the UNFL exception bit is set
-# the accrued bit is NOT set in this instance(no inexactness!)
-#
-fabs_denorm:
-	andi.b		&0xc0,%d0		# is precision extended?
-	bne.b		fabs_not_ext		# no
-
-	bset		&unfl_bit,FPSR_EXCEPT(%a6) # set unfl exc bit
-
-	mov.l		SRC_HI(%a0),FP_SCR0_HI(%a6)
-	mov.l		SRC_LO(%a0),FP_SCR0_LO(%a6)
-	mov.w		SRC_EX(%a0),%d0
-	bclr		&15,%d0			# clear sign
-	mov.w		%d0,FP_SCR0_EX(%a6)	# insert exponent
-
-	fmovm.x		FP_SCR0(%a6),&0x80	# return default result in fp0
-
-	btst		&unfl_bit,FPCR_ENABLE(%a6) # is UNFL enabled?
-	bne.b		fabs_ext_unfl_ena
-	rts
-
-#
-# the input is an extended DENORM and underflow is enabled in the FPCR.
-# normalize the mantissa and add the bias of 0x6000 to the resulting negative
-# exponent and insert back into the operand.
-#
-fabs_ext_unfl_ena:
-	lea		FP_SCR0(%a6),%a0	# pass: ptr to operand
-	bsr.l		norm			# normalize result
-	neg.w		%d0			# new exponent = -(shft val)
-	addi.w		&0x6000,%d0		# add new bias to exponent
-	mov.w		FP_SCR0_EX(%a6),%d1	# fetch old sign,exp
-	andi.w		&0x8000,%d1		# keep old sign
-	andi.w		&0x7fff,%d0		# clear sign position
-	or.w		%d1,%d0			# concat old sign, new exponent
-	mov.w		%d0,FP_SCR0_EX(%a6)	# insert new exponent
-	fmovm.x		FP_SCR0(%a6),&0x40	# return EXOP in fp1
-	rts
-
-#
-# operand is either single or double
-#
-fabs_not_ext:
-	cmpi.b		%d0,&s_mode*0x10	# separate sgl/dbl prec
-	bne.b		fabs_dbl
-
-#
-# operand is to be rounded to single precision
-#
-fabs_sgl:
-	mov.w		SRC_EX(%a0),FP_SCR0_EX(%a6)
-	mov.l		SRC_HI(%a0),FP_SCR0_HI(%a6)
-	mov.l		SRC_LO(%a0),FP_SCR0_LO(%a6)
-	bsr.l		scale_to_zero_src	# calculate scale factor
-
-	cmpi.l		%d0,&0x3fff-0x3f80	# will move in underflow?
-	bge.w		fabs_sd_unfl		# yes; go handle underflow
-	cmpi.l		%d0,&0x3fff-0x407e	# will move in overflow?
-	beq.w		fabs_sd_may_ovfl	# maybe; go check
-	blt.w		fabs_sd_ovfl		# yes; go handle overflow
-
-#
-# operand will NOT overflow or underflow when moved in to the fp reg file
-#
-fabs_sd_normal:
-	fmov.l		&0x0,%fpsr		# clear FPSR
-	fmov.l		L_SCR3(%a6),%fpcr	# set FPCR
-
-	fabs.x		FP_SCR0(%a6),%fp0	# perform absolute
-
-	fmov.l		%fpsr,%d1		# save FPSR
-	fmov.l		&0x0,%fpcr		# clear FPCR
-
-	or.l		%d1,USER_FPSR(%a6)	# save INEX2,N
-
-fabs_sd_normal_exit:
-	mov.l		%d2,-(%sp)		# save d2
-	fmovm.x		&0x80,FP_SCR0(%a6)	# store out result
-	mov.w		FP_SCR0_EX(%a6),%d1	# load sgn,exp
-	mov.l		%d1,%d2			# make a copy
-	andi.l		&0x7fff,%d1		# strip sign
-	sub.l		%d0,%d1			# add scale factor
-	andi.w		&0x8000,%d2		# keep old sign
-	or.w		%d1,%d2			# concat old sign,new exp
-	mov.w		%d2,FP_SCR0_EX(%a6)	# insert new exponent
-	mov.l		(%sp)+,%d2		# restore d2
-	fmovm.x		FP_SCR0(%a6),&0x80	# return result in fp0
-	rts
-
-#
-# operand is to be rounded to double precision
-#
-fabs_dbl:
-	mov.w		SRC_EX(%a0),FP_SCR0_EX(%a6)
-	mov.l		SRC_HI(%a0),FP_SCR0_HI(%a6)
-	mov.l		SRC_LO(%a0),FP_SCR0_LO(%a6)
-	bsr.l		scale_to_zero_src	# calculate scale factor
-
-	cmpi.l		%d0,&0x3fff-0x3c00	# will move in underflow?
-	bge.b		fabs_sd_unfl		# yes; go handle underflow
-	cmpi.l		%d0,&0x3fff-0x43fe	# will move in overflow?
-	beq.w		fabs_sd_may_ovfl	# maybe; go check
-	blt.w		fabs_sd_ovfl		# yes; go handle overflow
-	bra.w		fabs_sd_normal		# no; ho handle normalized op
-
-#
-# operand WILL underflow when moved in to the fp register file
-#
-fabs_sd_unfl:
-	bset		&unfl_bit,FPSR_EXCEPT(%a6) # set unfl exc bit
-
-	bclr		&0x7,FP_SCR0_EX(%a6)	# force absolute value
-
-# if underflow or inexact is enabled, go calculate EXOP first.
-	mov.b		FPCR_ENABLE(%a6),%d1
-	andi.b		&0x0b,%d1		# is UNFL or INEX enabled?
-	bne.b		fabs_sd_unfl_ena	# yes
-
-fabs_sd_unfl_dis:
-	lea		FP_SCR0(%a6),%a0	# pass: result addr
-	mov.l		L_SCR3(%a6),%d1		# pass: rnd prec,mode
-	bsr.l		unf_res			# calculate default result
-	or.b		%d0,FPSR_CC(%a6)	# set possible 'Z' ccode
-	fmovm.x		FP_SCR0(%a6),&0x80	# return default result in fp0
-	rts
-
-#
-# operand will underflow AND underflow is enabled.
-# Therefore, we must return the result rounded to extended precision.
-#
-fabs_sd_unfl_ena:
-	mov.l		FP_SCR0_HI(%a6),FP_SCR1_HI(%a6)
-	mov.l		FP_SCR0_LO(%a6),FP_SCR1_LO(%a6)
-	mov.w		FP_SCR0_EX(%a6),%d1	# load current exponent
-
-	mov.l		%d2,-(%sp)		# save d2
-	mov.l		%d1,%d2			# make a copy
-	andi.l		&0x7fff,%d1		# strip sign
-	andi.w		&0x8000,%d2		# keep old sign
-	sub.l		%d0,%d1			# subtract scale factor
-	addi.l		&0x6000,%d1		# add new bias
-	andi.w		&0x7fff,%d1
-	or.w		%d2,%d1			# concat new sign,new exp
-	mov.w		%d1,FP_SCR1_EX(%a6)	# insert new exp
-	fmovm.x		FP_SCR1(%a6),&0x40	# return EXOP in fp1
-	mov.l		(%sp)+,%d2		# restore d2
-	bra.b		fabs_sd_unfl_dis
-
-#
-# operand WILL overflow.
-#
-fabs_sd_ovfl:
-	fmov.l		&0x0,%fpsr		# clear FPSR
-	fmov.l		L_SCR3(%a6),%fpcr	# set FPCR
-
-	fabs.x		FP_SCR0(%a6),%fp0	# perform absolute
-
-	fmov.l		&0x0,%fpcr		# clear FPCR
-	fmov.l		%fpsr,%d1		# save FPSR
-
-	or.l		%d1,USER_FPSR(%a6)	# save INEX2,N
-
-fabs_sd_ovfl_tst:
-	or.l		&ovfl_inx_mask,USER_FPSR(%a6) # set ovfl/aovfl/ainex
-
-	mov.b		FPCR_ENABLE(%a6),%d1
-	andi.b		&0x13,%d1		# is OVFL or INEX enabled?
-	bne.b		fabs_sd_ovfl_ena	# yes
-
-#
-# OVFL is not enabled; therefore, we must create the default result by
-# calling ovf_res().
-#
-fabs_sd_ovfl_dis:
-	btst		&neg_bit,FPSR_CC(%a6)	# is result negative?
-	sne		%d1			# set sign param accordingly
-	mov.l		L_SCR3(%a6),%d0		# pass: prec,mode
-	bsr.l		ovf_res			# calculate default result
-	or.b		%d0,FPSR_CC(%a6)	# set INF,N if applicable
-	fmovm.x		(%a0),&0x80		# return default result in fp0
-	rts
-
-#
-# OVFL is enabled.
-# the INEX2 bit has already been updated by the round to the correct precision.
-# now, round to extended(and don't alter the FPSR).
-#
-fabs_sd_ovfl_ena:
-	mov.l		%d2,-(%sp)		# save d2
-	mov.w		FP_SCR0_EX(%a6),%d1	# fetch {sgn,exp}
-	mov.l		%d1,%d2			# make a copy
-	andi.l		&0x7fff,%d1		# strip sign
-	andi.w		&0x8000,%d2		# keep old sign
-	sub.l		%d0,%d1			# add scale factor
-	subi.l		&0x6000,%d1		# subtract bias
-	andi.w		&0x7fff,%d1
-	or.w		%d2,%d1			# concat sign,exp
-	mov.w		%d1,FP_SCR0_EX(%a6)	# insert new exponent
-	fmovm.x		FP_SCR0(%a6),&0x40	# return EXOP in fp1
-	mov.l		(%sp)+,%d2		# restore d2
-	bra.b		fabs_sd_ovfl_dis
-
-#
-# the move in MAY underflow. so...
-#
-fabs_sd_may_ovfl:
-	fmov.l		&0x0,%fpsr		# clear FPSR
-	fmov.l		L_SCR3(%a6),%fpcr	# set FPCR
-
-	fabs.x		FP_SCR0(%a6),%fp0	# perform absolute
-
-	fmov.l		%fpsr,%d1		# save status
-	fmov.l		&0x0,%fpcr		# clear FPCR
-
-	or.l		%d1,USER_FPSR(%a6)	# save INEX2,N
-
-	fabs.x		%fp0,%fp1		# make a copy of result
-	fcmp.b		%fp1,&0x2		# is |result| >= 2.b?
-	fbge.w		fabs_sd_ovfl_tst	# yes; overflow has occurred
-
-# no, it didn't overflow; we have correct result
-	bra.w		fabs_sd_normal_exit
-
-##########################################################################
-
-#
-# input is not normalized; what is it?
-#
-fabs_not_norm:
-	cmpi.b		%d1,&DENORM		# weed out DENORM
-	beq.w		fabs_denorm
-	cmpi.b		%d1,&SNAN		# weed out SNAN
-	beq.l		res_snan_1op
-	cmpi.b		%d1,&QNAN		# weed out QNAN
-	beq.l		res_qnan_1op
-
-	fabs.x		SRC(%a0),%fp0		# force absolute value
-
-	cmpi.b		%d1,&INF		# weed out INF
-	beq.b		fabs_inf
-fabs_zero:
-	mov.b		&z_bmask,FPSR_CC(%a6)	# set 'Z' ccode bit
-	rts
-fabs_inf:
-	mov.b		&inf_bmask,FPSR_CC(%a6)	# set 'I' ccode bit
-	rts
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	fcmp(): fp compare op routine					#
-#									#
-# XREF ****************************************************************	#
-#	res_qnan() - return QNAN result					#
-#	res_snan() - return SNAN result					#
-#									#
-# INPUT ***************************************************************	#
-#	a0 = pointer to extended precision source operand		#
-#	a1 = pointer to extended precision destination operand		#
-#	d0 = round prec/mode						#
-#									#
-# OUTPUT ************************************************************** #
-#	None								#
-#									#
-# ALGORITHM ***********************************************************	#
-#	Handle NANs and denorms as special cases. For everything else,	#
-# just use the actual fcmp instruction to produce the correct condition	#
-# codes.								#
-#									#
-#########################################################################
-
-	global		fcmp
-fcmp:
-	clr.w		%d1
-	mov.b		DTAG(%a6),%d1
-	lsl.b		&0x3,%d1
-	or.b		STAG(%a6),%d1
-	bne.b		fcmp_not_norm		# optimize on non-norm input
-
-#
-# COMPARE FP OPs : NORMs, ZEROs, INFs, and "corrected" DENORMs
-#
-fcmp_norm:
-	fmovm.x		DST(%a1),&0x80		# load dst op
-
-	fcmp.x		%fp0,SRC(%a0)		# do compare
-
-	fmov.l		%fpsr,%d0		# save FPSR
-	rol.l		&0x8,%d0		# extract ccode bits
-	mov.b		%d0,FPSR_CC(%a6)	# set ccode bits(no exc bits are set)
-
-	rts
-
-#
-# fcmp: inputs are not both normalized; what are they?
-#
-fcmp_not_norm:
-	mov.w		(tbl_fcmp_op.b,%pc,%d1.w*2),%d1
-	jmp		(tbl_fcmp_op.b,%pc,%d1.w*1)
-
-	swbeg		&48
-tbl_fcmp_op:
-	short		fcmp_norm	- tbl_fcmp_op # NORM - NORM
-	short		fcmp_norm	- tbl_fcmp_op # NORM - ZERO
-	short		fcmp_norm	- tbl_fcmp_op # NORM - INF
-	short		fcmp_res_qnan	- tbl_fcmp_op # NORM - QNAN
-	short		fcmp_nrm_dnrm	- tbl_fcmp_op # NORM - DENORM
-	short		fcmp_res_snan	- tbl_fcmp_op # NORM - SNAN
-	short		tbl_fcmp_op	- tbl_fcmp_op #
-	short		tbl_fcmp_op	- tbl_fcmp_op #
-
-	short		fcmp_norm	- tbl_fcmp_op # ZERO - NORM
-	short		fcmp_norm	- tbl_fcmp_op # ZERO - ZERO
-	short		fcmp_norm	- tbl_fcmp_op # ZERO - INF
-	short		fcmp_res_qnan	- tbl_fcmp_op # ZERO - QNAN
-	short		fcmp_dnrm_s	- tbl_fcmp_op # ZERO - DENORM
-	short		fcmp_res_snan	- tbl_fcmp_op # ZERO - SNAN
-	short		tbl_fcmp_op	- tbl_fcmp_op #
-	short		tbl_fcmp_op	- tbl_fcmp_op #
-
-	short		fcmp_norm	- tbl_fcmp_op # INF - NORM
-	short		fcmp_norm	- tbl_fcmp_op # INF - ZERO
-	short		fcmp_norm	- tbl_fcmp_op # INF - INF
-	short		fcmp_res_qnan	- tbl_fcmp_op # INF - QNAN
-	short		fcmp_dnrm_s	- tbl_fcmp_op # INF - DENORM
-	short		fcmp_res_snan	- tbl_fcmp_op # INF - SNAN
-	short		tbl_fcmp_op	- tbl_fcmp_op #
-	short		tbl_fcmp_op	- tbl_fcmp_op #
-
-	short		fcmp_res_qnan	- tbl_fcmp_op # QNAN - NORM
-	short		fcmp_res_qnan	- tbl_fcmp_op # QNAN - ZERO
-	short		fcmp_res_qnan	- tbl_fcmp_op # QNAN - INF
-	short		fcmp_res_qnan	- tbl_fcmp_op # QNAN - QNAN
-	short		fcmp_res_qnan	- tbl_fcmp_op # QNAN - DENORM
-	short		fcmp_res_snan	- tbl_fcmp_op # QNAN - SNAN
-	short		tbl_fcmp_op	- tbl_fcmp_op #
-	short		tbl_fcmp_op	- tbl_fcmp_op #
-
-	short		fcmp_dnrm_nrm	- tbl_fcmp_op # DENORM - NORM
-	short		fcmp_dnrm_d	- tbl_fcmp_op # DENORM - ZERO
-	short		fcmp_dnrm_d	- tbl_fcmp_op # DENORM - INF
-	short		fcmp_res_qnan	- tbl_fcmp_op # DENORM - QNAN
-	short		fcmp_dnrm_sd	- tbl_fcmp_op # DENORM - DENORM
-	short		fcmp_res_snan	- tbl_fcmp_op # DENORM - SNAN
-	short		tbl_fcmp_op	- tbl_fcmp_op #
-	short		tbl_fcmp_op	- tbl_fcmp_op #
-
-	short		fcmp_res_snan	- tbl_fcmp_op # SNAN - NORM
-	short		fcmp_res_snan	- tbl_fcmp_op # SNAN - ZERO
-	short		fcmp_res_snan	- tbl_fcmp_op # SNAN - INF
-	short		fcmp_res_snan	- tbl_fcmp_op # SNAN - QNAN
-	short		fcmp_res_snan	- tbl_fcmp_op # SNAN - DENORM
-	short		fcmp_res_snan	- tbl_fcmp_op # SNAN - SNAN
-	short		tbl_fcmp_op	- tbl_fcmp_op #
-	short		tbl_fcmp_op	- tbl_fcmp_op #
-
-# unlike all other functions for QNAN and SNAN, fcmp does NOT set the
-# 'N' bit for a negative QNAN or SNAN input so we must squelch it here.
-fcmp_res_qnan:
-	bsr.l		res_qnan
-	andi.b		&0xf7,FPSR_CC(%a6)
-	rts
-fcmp_res_snan:
-	bsr.l		res_snan
-	andi.b		&0xf7,FPSR_CC(%a6)
-	rts
-
-#
-# DENORMs are a little more difficult.
-# If you have a 2 DENORMs, then you can just force the j-bit to a one
-# and use the fcmp_norm routine.
-# If you have a DENORM and an INF or ZERO, just force the DENORM's j-bit to a one
-# and use the fcmp_norm routine.
-# If you have a DENORM and a NORM with opposite signs, then use fcmp_norm, also.
-# But with a DENORM and a NORM of the same sign, the neg bit is set if the
-# (1) signs are (+) and the DENORM is the dst or
-# (2) signs are (-) and the DENORM is the src
-#
-
-fcmp_dnrm_s:
-	mov.w		SRC_EX(%a0),FP_SCR0_EX(%a6)
-	mov.l		SRC_HI(%a0),%d0
-	bset		&31,%d0			# DENORM src; make into small norm
-	mov.l		%d0,FP_SCR0_HI(%a6)
-	mov.l		SRC_LO(%a0),FP_SCR0_LO(%a6)
-	lea		FP_SCR0(%a6),%a0
-	bra.w		fcmp_norm
-
-fcmp_dnrm_d:
-	mov.l		DST_EX(%a1),FP_SCR0_EX(%a6)
-	mov.l		DST_HI(%a1),%d0
-	bset		&31,%d0			# DENORM src; make into small norm
-	mov.l		%d0,FP_SCR0_HI(%a6)
-	mov.l		DST_LO(%a1),FP_SCR0_LO(%a6)
-	lea		FP_SCR0(%a6),%a1
-	bra.w		fcmp_norm
-
-fcmp_dnrm_sd:
-	mov.w		DST_EX(%a1),FP_SCR1_EX(%a6)
-	mov.w		SRC_EX(%a0),FP_SCR0_EX(%a6)
-	mov.l		DST_HI(%a1),%d0
-	bset		&31,%d0			# DENORM dst; make into small norm
-	mov.l		%d0,FP_SCR1_HI(%a6)
-	mov.l		SRC_HI(%a0),%d0
-	bset		&31,%d0			# DENORM dst; make into small norm
-	mov.l		%d0,FP_SCR0_HI(%a6)
-	mov.l		DST_LO(%a1),FP_SCR1_LO(%a6)
-	mov.l		SRC_LO(%a0),FP_SCR0_LO(%a6)
-	lea		FP_SCR1(%a6),%a1
-	lea		FP_SCR0(%a6),%a0
-	bra.w		fcmp_norm
-
-fcmp_nrm_dnrm:
-	mov.b		SRC_EX(%a0),%d0		# determine if like signs
-	mov.b		DST_EX(%a1),%d1
-	eor.b		%d0,%d1
-	bmi.w		fcmp_dnrm_s
-
-# signs are the same, so must determine the answer ourselves.
-	tst.b		%d0			# is src op negative?
-	bmi.b		fcmp_nrm_dnrm_m		# yes
-	rts
-fcmp_nrm_dnrm_m:
-	mov.b		&neg_bmask,FPSR_CC(%a6)	# set 'Z' ccode bit
-	rts
-
-fcmp_dnrm_nrm:
-	mov.b		SRC_EX(%a0),%d0		# determine if like signs
-	mov.b		DST_EX(%a1),%d1
-	eor.b		%d0,%d1
-	bmi.w		fcmp_dnrm_d
-
-# signs are the same, so must determine the answer ourselves.
-	tst.b		%d0			# is src op negative?
-	bpl.b		fcmp_dnrm_nrm_m		# no
-	rts
-fcmp_dnrm_nrm_m:
-	mov.b		&neg_bmask,FPSR_CC(%a6)	# set 'Z' ccode bit
-	rts
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	fsglmul(): emulates the fsglmul instruction			#
-#									#
-# XREF ****************************************************************	#
-#	scale_to_zero_src() - scale src exponent to zero		#
-#	scale_to_zero_dst() - scale dst exponent to zero		#
-#	unf_res4() - return default underflow result for sglop		#
-#	ovf_res() - return default overflow result			#
-#	res_qnan() - return QNAN result					#
-#	res_snan() - return SNAN result					#
-#									#
-# INPUT ***************************************************************	#
-#	a0 = pointer to extended precision source operand		#
-#	a1 = pointer to extended precision destination operand		#
-#	d0  rnd prec,mode						#
-#									#
-# OUTPUT **************************************************************	#
-#	fp0 = result							#
-#	fp1 = EXOP (if exception occurred)				#
-#									#
-# ALGORITHM ***********************************************************	#
-#	Handle NANs, infinities, and zeroes as special cases. Divide	#
-# norms/denorms into ext/sgl/dbl precision.				#
-#	For norms/denorms, scale the exponents such that a multiply	#
-# instruction won't cause an exception. Use the regular fsglmul to	#
-# compute a result. Check if the regular operands would have taken	#
-# an exception. If so, return the default overflow/underflow result	#
-# and return the EXOP if exceptions are enabled. Else, scale the	#
-# result operand to the proper exponent.				#
-#									#
-#########################################################################
-
-	global		fsglmul
-fsglmul:
-	mov.l		%d0,L_SCR3(%a6)		# store rnd info
-
-	clr.w		%d1
-	mov.b		DTAG(%a6),%d1
-	lsl.b		&0x3,%d1
-	or.b		STAG(%a6),%d1
-
-	bne.w		fsglmul_not_norm	# optimize on non-norm input
-
-fsglmul_norm:
-	mov.w		DST_EX(%a1),FP_SCR1_EX(%a6)
-	mov.l		DST_HI(%a1),FP_SCR1_HI(%a6)
-	mov.l		DST_LO(%a1),FP_SCR1_LO(%a6)
-
-	mov.w		SRC_EX(%a0),FP_SCR0_EX(%a6)
-	mov.l		SRC_HI(%a0),FP_SCR0_HI(%a6)
-	mov.l		SRC_LO(%a0),FP_SCR0_LO(%a6)
-
-	bsr.l		scale_to_zero_src	# scale exponent
-	mov.l		%d0,-(%sp)		# save scale factor 1
-
-	bsr.l		scale_to_zero_dst	# scale dst exponent
-
-	add.l		(%sp)+,%d0		# SCALE_FACTOR = scale1 + scale2
-
-	cmpi.l		%d0,&0x3fff-0x7ffe	# would result ovfl?
-	beq.w		fsglmul_may_ovfl	# result may rnd to overflow
-	blt.w		fsglmul_ovfl		# result will overflow
-
-	cmpi.l		%d0,&0x3fff+0x0001	# would result unfl?
-	beq.w		fsglmul_may_unfl	# result may rnd to no unfl
-	bgt.w		fsglmul_unfl		# result will underflow
-
-fsglmul_normal:
-	fmovm.x		FP_SCR1(%a6),&0x80	# load dst op
-
-	fmov.l		L_SCR3(%a6),%fpcr	# set FPCR
-	fmov.l		&0x0,%fpsr		# clear FPSR
-
-	fsglmul.x	FP_SCR0(%a6),%fp0	# execute sgl multiply
-
-	fmov.l		%fpsr,%d1		# save status
-	fmov.l		&0x0,%fpcr		# clear FPCR
-
-	or.l		%d1,USER_FPSR(%a6)	# save INEX2,N
-
-fsglmul_normal_exit:
-	fmovm.x		&0x80,FP_SCR0(%a6)	# store out result
-	mov.l		%d2,-(%sp)		# save d2
-	mov.w		FP_SCR0_EX(%a6),%d1	# load {sgn,exp}
-	mov.l		%d1,%d2			# make a copy
-	andi.l		&0x7fff,%d1		# strip sign
-	andi.w		&0x8000,%d2		# keep old sign
-	sub.l		%d0,%d1			# add scale factor
-	or.w		%d2,%d1			# concat old sign,new exp
-	mov.w		%d1,FP_SCR0_EX(%a6)	# insert new exponent
-	mov.l		(%sp)+,%d2		# restore d2
-	fmovm.x		FP_SCR0(%a6),&0x80	# return result in fp0
-	rts
-
-fsglmul_ovfl:
-	fmovm.x		FP_SCR1(%a6),&0x80	# load dst op
-
-	fmov.l		L_SCR3(%a6),%fpcr	# set FPCR
-	fmov.l		&0x0,%fpsr		# clear FPSR
-
-	fsglmul.x	FP_SCR0(%a6),%fp0	# execute sgl multiply
-
-	fmov.l		%fpsr,%d1		# save status
-	fmov.l		&0x0,%fpcr		# clear FPCR
-
-	or.l		%d1,USER_FPSR(%a6)	# save INEX2,N
-
-fsglmul_ovfl_tst:
-
-# save setting this until now because this is where fsglmul_may_ovfl may jump in
-	or.l		&ovfl_inx_mask, USER_FPSR(%a6) # set ovfl/aovfl/ainex
-
-	mov.b		FPCR_ENABLE(%a6),%d1
-	andi.b		&0x13,%d1		# is OVFL or INEX enabled?
-	bne.b		fsglmul_ovfl_ena	# yes
-
-fsglmul_ovfl_dis:
-	btst		&neg_bit,FPSR_CC(%a6)	# is result negative?
-	sne		%d1			# set sign param accordingly
-	mov.l		L_SCR3(%a6),%d0		# pass prec:rnd
-	andi.b		&0x30,%d0		# force prec = ext
-	bsr.l		ovf_res			# calculate default result
-	or.b		%d0,FPSR_CC(%a6)	# set INF,N if applicable
-	fmovm.x		(%a0),&0x80		# return default result in fp0
-	rts
-
-fsglmul_ovfl_ena:
-	fmovm.x		&0x80,FP_SCR0(%a6)	# move result to stack
-
-	mov.l		%d2,-(%sp)		# save d2
-	mov.w		FP_SCR0_EX(%a6),%d1	# fetch {sgn,exp}
-	mov.l		%d1,%d2			# make a copy
-	andi.l		&0x7fff,%d1		# strip sign
-	sub.l		%d0,%d1			# add scale factor
-	subi.l		&0x6000,%d1		# subtract bias
-	andi.w		&0x7fff,%d1
-	andi.w		&0x8000,%d2		# keep old sign
-	or.w		%d2,%d1			# concat old sign,new exp
-	mov.w		%d1,FP_SCR0_EX(%a6)	# insert new exponent
-	mov.l		(%sp)+,%d2		# restore d2
-	fmovm.x		FP_SCR0(%a6),&0x40	# return EXOP in fp1
-	bra.b		fsglmul_ovfl_dis
-
-fsglmul_may_ovfl:
-	fmovm.x		FP_SCR1(%a6),&0x80	# load dst op
-
-	fmov.l		L_SCR3(%a6),%fpcr	# set FPCR
-	fmov.l		&0x0,%fpsr		# clear FPSR
-
-	fsglmul.x	FP_SCR0(%a6),%fp0	# execute sgl multiply
-
-	fmov.l		%fpsr,%d1		# save status
-	fmov.l		&0x0,%fpcr		# clear FPCR
-
-	or.l		%d1,USER_FPSR(%a6)	# save INEX2,N
-
-	fabs.x		%fp0,%fp1		# make a copy of result
-	fcmp.b		%fp1,&0x2		# is |result| >= 2.b?
-	fbge.w		fsglmul_ovfl_tst	# yes; overflow has occurred
-
-# no, it didn't overflow; we have correct result
-	bra.w		fsglmul_normal_exit
-
-fsglmul_unfl:
-	bset		&unfl_bit,FPSR_EXCEPT(%a6) # set unfl exc bit
-
-	fmovm.x		FP_SCR1(%a6),&0x80	# load dst op
-
-	fmov.l		&rz_mode*0x10,%fpcr	# set FPCR
-	fmov.l		&0x0,%fpsr		# clear FPSR
-
-	fsglmul.x	FP_SCR0(%a6),%fp0	# execute sgl multiply
-
-	fmov.l		%fpsr,%d1		# save status
-	fmov.l		&0x0,%fpcr		# clear FPCR
-
-	or.l		%d1,USER_FPSR(%a6)	# save INEX2,N
-
-	mov.b		FPCR_ENABLE(%a6),%d1
-	andi.b		&0x0b,%d1		# is UNFL or INEX enabled?
-	bne.b		fsglmul_unfl_ena	# yes
-
-fsglmul_unfl_dis:
-	fmovm.x		&0x80,FP_SCR0(%a6)	# store out result
-
-	lea		FP_SCR0(%a6),%a0	# pass: result addr
-	mov.l		L_SCR3(%a6),%d1		# pass: rnd prec,mode
-	bsr.l		unf_res4		# calculate default result
-	or.b		%d0,FPSR_CC(%a6)	# 'Z' bit may have been set
-	fmovm.x		FP_SCR0(%a6),&0x80	# return default result in fp0
-	rts
-
-#
-# UNFL is enabled.
-#
-fsglmul_unfl_ena:
-	fmovm.x		FP_SCR1(%a6),&0x40	# load dst op
-
-	fmov.l		L_SCR3(%a6),%fpcr	# set FPCR
-	fmov.l		&0x0,%fpsr		# clear FPSR
-
-	fsglmul.x	FP_SCR0(%a6),%fp1	# execute sgl multiply
-
-	fmov.l		&0x0,%fpcr		# clear FPCR
-
-	fmovm.x		&0x40,FP_SCR0(%a6)	# save result to stack
-	mov.l		%d2,-(%sp)		# save d2
-	mov.w		FP_SCR0_EX(%a6),%d1	# fetch {sgn,exp}
-	mov.l		%d1,%d2			# make a copy
-	andi.l		&0x7fff,%d1		# strip sign
-	andi.w		&0x8000,%d2		# keep old sign
-	sub.l		%d0,%d1			# add scale factor
-	addi.l		&0x6000,%d1		# add bias
-	andi.w		&0x7fff,%d1
-	or.w		%d2,%d1			# concat old sign,new exp
-	mov.w		%d1,FP_SCR0_EX(%a6)	# insert new exponent
-	mov.l		(%sp)+,%d2		# restore d2
-	fmovm.x		FP_SCR0(%a6),&0x40	# return EXOP in fp1
-	bra.w		fsglmul_unfl_dis
-
-fsglmul_may_unfl:
-	fmovm.x		FP_SCR1(%a6),&0x80	# load dst op
-
-	fmov.l		L_SCR3(%a6),%fpcr	# set FPCR
-	fmov.l		&0x0,%fpsr		# clear FPSR
-
-	fsglmul.x	FP_SCR0(%a6),%fp0	# execute sgl multiply
-
-	fmov.l		%fpsr,%d1		# save status
-	fmov.l		&0x0,%fpcr		# clear FPCR
-
-	or.l		%d1,USER_FPSR(%a6)	# save INEX2,N
-
-	fabs.x		%fp0,%fp1		# make a copy of result
-	fcmp.b		%fp1,&0x2		# is |result| > 2.b?
-	fbgt.w		fsglmul_normal_exit	# no; no underflow occurred
-	fblt.w		fsglmul_unfl		# yes; underflow occurred
-
-#
-# we still don't know if underflow occurred. result is ~ equal to 2. but,
-# we don't know if the result was an underflow that rounded up to a 2 or
-# a normalized number that rounded down to a 2. so, redo the entire operation
-# using RZ as the rounding mode to see what the pre-rounded result is.
-# this case should be relatively rare.
-#
-	fmovm.x		FP_SCR1(%a6),&0x40	# load dst op into fp1
-
-	mov.l		L_SCR3(%a6),%d1
-	andi.b		&0xc0,%d1		# keep rnd prec
-	ori.b		&rz_mode*0x10,%d1	# insert RZ
-
-	fmov.l		%d1,%fpcr		# set FPCR
-	fmov.l		&0x0,%fpsr		# clear FPSR
-
-	fsglmul.x	FP_SCR0(%a6),%fp1	# execute sgl multiply
-
-	fmov.l		&0x0,%fpcr		# clear FPCR
-	fabs.x		%fp1			# make absolute value
-	fcmp.b		%fp1,&0x2		# is |result| < 2.b?
-	fbge.w		fsglmul_normal_exit	# no; no underflow occurred
-	bra.w		fsglmul_unfl		# yes, underflow occurred
-
-##############################################################################
-
-#
-# Single Precision Multiply: inputs are not both normalized; what are they?
-#
-fsglmul_not_norm:
-	mov.w		(tbl_fsglmul_op.b,%pc,%d1.w*2),%d1
-	jmp		(tbl_fsglmul_op.b,%pc,%d1.w*1)
-
-	swbeg		&48
-tbl_fsglmul_op:
-	short		fsglmul_norm		- tbl_fsglmul_op # NORM x NORM
-	short		fsglmul_zero		- tbl_fsglmul_op # NORM x ZERO
-	short		fsglmul_inf_src		- tbl_fsglmul_op # NORM x INF
-	short		fsglmul_res_qnan	- tbl_fsglmul_op # NORM x QNAN
-	short		fsglmul_norm		- tbl_fsglmul_op # NORM x DENORM
-	short		fsglmul_res_snan	- tbl_fsglmul_op # NORM x SNAN
-	short		tbl_fsglmul_op		- tbl_fsglmul_op #
-	short		tbl_fsglmul_op		- tbl_fsglmul_op #
-
-	short		fsglmul_zero		- tbl_fsglmul_op # ZERO x NORM
-	short		fsglmul_zero		- tbl_fsglmul_op # ZERO x ZERO
-	short		fsglmul_res_operr	- tbl_fsglmul_op # ZERO x INF
-	short		fsglmul_res_qnan	- tbl_fsglmul_op # ZERO x QNAN
-	short		fsglmul_zero		- tbl_fsglmul_op # ZERO x DENORM
-	short		fsglmul_res_snan	- tbl_fsglmul_op # ZERO x SNAN
-	short		tbl_fsglmul_op		- tbl_fsglmul_op #
-	short		tbl_fsglmul_op		- tbl_fsglmul_op #
-
-	short		fsglmul_inf_dst		- tbl_fsglmul_op # INF x NORM
-	short		fsglmul_res_operr	- tbl_fsglmul_op # INF x ZERO
-	short		fsglmul_inf_dst		- tbl_fsglmul_op # INF x INF
-	short		fsglmul_res_qnan	- tbl_fsglmul_op # INF x QNAN
-	short		fsglmul_inf_dst		- tbl_fsglmul_op # INF x DENORM
-	short		fsglmul_res_snan	- tbl_fsglmul_op # INF x SNAN
-	short		tbl_fsglmul_op		- tbl_fsglmul_op #
-	short		tbl_fsglmul_op		- tbl_fsglmul_op #
-
-	short		fsglmul_res_qnan	- tbl_fsglmul_op # QNAN x NORM
-	short		fsglmul_res_qnan	- tbl_fsglmul_op # QNAN x ZERO
-	short		fsglmul_res_qnan	- tbl_fsglmul_op # QNAN x INF
-	short		fsglmul_res_qnan	- tbl_fsglmul_op # QNAN x QNAN
-	short		fsglmul_res_qnan	- tbl_fsglmul_op # QNAN x DENORM
-	short		fsglmul_res_snan	- tbl_fsglmul_op # QNAN x SNAN
-	short		tbl_fsglmul_op		- tbl_fsglmul_op #
-	short		tbl_fsglmul_op		- tbl_fsglmul_op #
-
-	short		fsglmul_norm		- tbl_fsglmul_op # NORM x NORM
-	short		fsglmul_zero		- tbl_fsglmul_op # NORM x ZERO
-	short		fsglmul_inf_src		- tbl_fsglmul_op # NORM x INF
-	short		fsglmul_res_qnan	- tbl_fsglmul_op # NORM x QNAN
-	short		fsglmul_norm		- tbl_fsglmul_op # NORM x DENORM
-	short		fsglmul_res_snan	- tbl_fsglmul_op # NORM x SNAN
-	short		tbl_fsglmul_op		- tbl_fsglmul_op #
-	short		tbl_fsglmul_op		- tbl_fsglmul_op #
-
-	short		fsglmul_res_snan	- tbl_fsglmul_op # SNAN x NORM
-	short		fsglmul_res_snan	- tbl_fsglmul_op # SNAN x ZERO
-	short		fsglmul_res_snan	- tbl_fsglmul_op # SNAN x INF
-	short		fsglmul_res_snan	- tbl_fsglmul_op # SNAN x QNAN
-	short		fsglmul_res_snan	- tbl_fsglmul_op # SNAN x DENORM
-	short		fsglmul_res_snan	- tbl_fsglmul_op # SNAN x SNAN
-	short		tbl_fsglmul_op		- tbl_fsglmul_op #
-	short		tbl_fsglmul_op		- tbl_fsglmul_op #
-
-fsglmul_res_operr:
-	bra.l		res_operr
-fsglmul_res_snan:
-	bra.l		res_snan
-fsglmul_res_qnan:
-	bra.l		res_qnan
-fsglmul_zero:
-	bra.l		fmul_zero
-fsglmul_inf_src:
-	bra.l		fmul_inf_src
-fsglmul_inf_dst:
-	bra.l		fmul_inf_dst
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	fsgldiv(): emulates the fsgldiv instruction			#
-#									#
-# XREF ****************************************************************	#
-#	scale_to_zero_src() - scale src exponent to zero		#
-#	scale_to_zero_dst() - scale dst exponent to zero		#
-#	unf_res4() - return default underflow result for sglop		#
-#	ovf_res() - return default overflow result			#
-#	res_qnan() - return QNAN result					#
-#	res_snan() - return SNAN result					#
-#									#
-# INPUT ***************************************************************	#
-#	a0 = pointer to extended precision source operand		#
-#	a1 = pointer to extended precision destination operand		#
-#	d0  rnd prec,mode						#
-#									#
-# OUTPUT **************************************************************	#
-#	fp0 = result							#
-#	fp1 = EXOP (if exception occurred)				#
-#									#
-# ALGORITHM ***********************************************************	#
-#	Handle NANs, infinities, and zeroes as special cases. Divide	#
-# norms/denorms into ext/sgl/dbl precision.				#
-#	For norms/denorms, scale the exponents such that a divide	#
-# instruction won't cause an exception. Use the regular fsgldiv to	#
-# compute a result. Check if the regular operands would have taken	#
-# an exception. If so, return the default overflow/underflow result	#
-# and return the EXOP if exceptions are enabled. Else, scale the	#
-# result operand to the proper exponent.				#
-#									#
-#########################################################################
-
-	global		fsgldiv
-fsgldiv:
-	mov.l		%d0,L_SCR3(%a6)		# store rnd info
-
-	clr.w		%d1
-	mov.b		DTAG(%a6),%d1
-	lsl.b		&0x3,%d1
-	or.b		STAG(%a6),%d1		# combine src tags
-
-	bne.w		fsgldiv_not_norm	# optimize on non-norm input
-
-#
-# DIVIDE: NORMs and DENORMs ONLY!
-#
-fsgldiv_norm:
-	mov.w		DST_EX(%a1),FP_SCR1_EX(%a6)
-	mov.l		DST_HI(%a1),FP_SCR1_HI(%a6)
-	mov.l		DST_LO(%a1),FP_SCR1_LO(%a6)
-
-	mov.w		SRC_EX(%a0),FP_SCR0_EX(%a6)
-	mov.l		SRC_HI(%a0),FP_SCR0_HI(%a6)
-	mov.l		SRC_LO(%a0),FP_SCR0_LO(%a6)
-
-	bsr.l		scale_to_zero_src	# calculate scale factor 1
-	mov.l		%d0,-(%sp)		# save scale factor 1
-
-	bsr.l		scale_to_zero_dst	# calculate scale factor 2
-
-	neg.l		(%sp)			# S.F. = scale1 - scale2
-	add.l		%d0,(%sp)
-
-	mov.w		2+L_SCR3(%a6),%d1	# fetch precision,mode
-	lsr.b		&0x6,%d1
-	mov.l		(%sp)+,%d0
-	cmpi.l		%d0,&0x3fff-0x7ffe
-	ble.w		fsgldiv_may_ovfl
-
-	cmpi.l		%d0,&0x3fff-0x0000	# will result underflow?
-	beq.w		fsgldiv_may_unfl	# maybe
-	bgt.w		fsgldiv_unfl		# yes; go handle underflow
-
-fsgldiv_normal:
-	fmovm.x		FP_SCR1(%a6),&0x80	# load dst op
-
-	fmov.l		L_SCR3(%a6),%fpcr	# save FPCR
-	fmov.l		&0x0,%fpsr		# clear FPSR
-
-	fsgldiv.x	FP_SCR0(%a6),%fp0	# perform sgl divide
-
-	fmov.l		%fpsr,%d1		# save FPSR
-	fmov.l		&0x0,%fpcr		# clear FPCR
-
-	or.l		%d1,USER_FPSR(%a6)	# save INEX2,N
-
-fsgldiv_normal_exit:
-	fmovm.x		&0x80,FP_SCR0(%a6)	# store result on stack
-	mov.l		%d2,-(%sp)		# save d2
-	mov.w		FP_SCR0_EX(%a6),%d1	# load {sgn,exp}
-	mov.l		%d1,%d2			# make a copy
-	andi.l		&0x7fff,%d1		# strip sign
-	andi.w		&0x8000,%d2		# keep old sign
-	sub.l		%d0,%d1			# add scale factor
-	or.w		%d2,%d1			# concat old sign,new exp
-	mov.w		%d1,FP_SCR0_EX(%a6)	# insert new exponent
-	mov.l		(%sp)+,%d2		# restore d2
-	fmovm.x		FP_SCR0(%a6),&0x80	# return result in fp0
-	rts
-
-fsgldiv_may_ovfl:
-	fmovm.x		FP_SCR1(%a6),&0x80	# load dst op
-
-	fmov.l		L_SCR3(%a6),%fpcr	# set FPCR
-	fmov.l		&0x0,%fpsr		# set FPSR
-
-	fsgldiv.x	FP_SCR0(%a6),%fp0	# execute divide
-
-	fmov.l		%fpsr,%d1
-	fmov.l		&0x0,%fpcr
-
-	or.l		%d1,USER_FPSR(%a6)	# save INEX,N
-
-	fmovm.x		&0x01,-(%sp)		# save result to stack
-	mov.w		(%sp),%d1		# fetch new exponent
-	add.l		&0xc,%sp		# clear result
-	andi.l		&0x7fff,%d1		# strip sign
-	sub.l		%d0,%d1			# add scale factor
-	cmp.l		%d1,&0x7fff		# did divide overflow?
-	blt.b		fsgldiv_normal_exit
-
-fsgldiv_ovfl_tst:
-	or.w		&ovfl_inx_mask,2+USER_FPSR(%a6) # set ovfl/aovfl/ainex
-
-	mov.b		FPCR_ENABLE(%a6),%d1
-	andi.b		&0x13,%d1		# is OVFL or INEX enabled?
-	bne.b		fsgldiv_ovfl_ena	# yes
-
-fsgldiv_ovfl_dis:
-	btst		&neg_bit,FPSR_CC(%a6)	# is result negative
-	sne		%d1			# set sign param accordingly
-	mov.l		L_SCR3(%a6),%d0		# pass prec:rnd
-	andi.b		&0x30,%d0		# kill precision
-	bsr.l		ovf_res			# calculate default result
-	or.b		%d0,FPSR_CC(%a6)	# set INF if applicable
-	fmovm.x		(%a0),&0x80		# return default result in fp0
-	rts
-
-fsgldiv_ovfl_ena:
-	fmovm.x		&0x80,FP_SCR0(%a6)	# move result to stack
-
-	mov.l		%d2,-(%sp)		# save d2
-	mov.w		FP_SCR0_EX(%a6),%d1	# fetch {sgn,exp}
-	mov.l		%d1,%d2			# make a copy
-	andi.l		&0x7fff,%d1		# strip sign
-	andi.w		&0x8000,%d2		# keep old sign
-	sub.l		%d0,%d1			# add scale factor
-	subi.l		&0x6000,%d1		# subtract new bias
-	andi.w		&0x7fff,%d1		# clear ms bit
-	or.w		%d2,%d1			# concat old sign,new exp
-	mov.w		%d1,FP_SCR0_EX(%a6)	# insert new exponent
-	mov.l		(%sp)+,%d2		# restore d2
-	fmovm.x		FP_SCR0(%a6),&0x40	# return EXOP in fp1
-	bra.b		fsgldiv_ovfl_dis
-
-fsgldiv_unfl:
-	bset		&unfl_bit,FPSR_EXCEPT(%a6) # set unfl exc bit
-
-	fmovm.x		FP_SCR1(%a6),&0x80	# load dst op
-
-	fmov.l		&rz_mode*0x10,%fpcr	# set FPCR
-	fmov.l		&0x0,%fpsr		# clear FPSR
-
-	fsgldiv.x	FP_SCR0(%a6),%fp0	# execute sgl divide
-
-	fmov.l		%fpsr,%d1		# save status
-	fmov.l		&0x0,%fpcr		# clear FPCR
-
-	or.l		%d1,USER_FPSR(%a6)	# save INEX2,N
-
-	mov.b		FPCR_ENABLE(%a6),%d1
-	andi.b		&0x0b,%d1		# is UNFL or INEX enabled?
-	bne.b		fsgldiv_unfl_ena	# yes
-
-fsgldiv_unfl_dis:
-	fmovm.x		&0x80,FP_SCR0(%a6)	# store out result
-
-	lea		FP_SCR0(%a6),%a0	# pass: result addr
-	mov.l		L_SCR3(%a6),%d1		# pass: rnd prec,mode
-	bsr.l		unf_res4		# calculate default result
-	or.b		%d0,FPSR_CC(%a6)	# 'Z' bit may have been set
-	fmovm.x		FP_SCR0(%a6),&0x80	# return default result in fp0
-	rts
-
-#
-# UNFL is enabled.
-#
-fsgldiv_unfl_ena:
-	fmovm.x		FP_SCR1(%a6),&0x40	# load dst op
-
-	fmov.l		L_SCR3(%a6),%fpcr	# set FPCR
-	fmov.l		&0x0,%fpsr		# clear FPSR
-
-	fsgldiv.x	FP_SCR0(%a6),%fp1	# execute sgl divide
-
-	fmov.l		&0x0,%fpcr		# clear FPCR
-
-	fmovm.x		&0x40,FP_SCR0(%a6)	# save result to stack
-	mov.l		%d2,-(%sp)		# save d2
-	mov.w		FP_SCR0_EX(%a6),%d1	# fetch {sgn,exp}
-	mov.l		%d1,%d2			# make a copy
-	andi.l		&0x7fff,%d1		# strip sign
-	andi.w		&0x8000,%d2		# keep old sign
-	sub.l		%d0,%d1			# add scale factor
-	addi.l		&0x6000,%d1		# add bias
-	andi.w		&0x7fff,%d1		# clear top bit
-	or.w		%d2,%d1			# concat old sign, new exp
-	mov.w		%d1,FP_SCR0_EX(%a6)	# insert new exponent
-	mov.l		(%sp)+,%d2		# restore d2
-	fmovm.x		FP_SCR0(%a6),&0x40	# return EXOP in fp1
-	bra.b		fsgldiv_unfl_dis
-
-#
-# the divide operation MAY underflow:
-#
-fsgldiv_may_unfl:
-	fmovm.x		FP_SCR1(%a6),&0x80	# load dst op
-
-	fmov.l		L_SCR3(%a6),%fpcr	# set FPCR
-	fmov.l		&0x0,%fpsr		# clear FPSR
-
-	fsgldiv.x	FP_SCR0(%a6),%fp0	# execute sgl divide
-
-	fmov.l		%fpsr,%d1		# save status
-	fmov.l		&0x0,%fpcr		# clear FPCR
-
-	or.l		%d1,USER_FPSR(%a6)	# save INEX2,N
-
-	fabs.x		%fp0,%fp1		# make a copy of result
-	fcmp.b		%fp1,&0x1		# is |result| > 1.b?
-	fbgt.w		fsgldiv_normal_exit	# no; no underflow occurred
-	fblt.w		fsgldiv_unfl		# yes; underflow occurred
-
-#
-# we still don't know if underflow occurred. result is ~ equal to 1. but,
-# we don't know if the result was an underflow that rounded up to a 1
-# or a normalized number that rounded down to a 1. so, redo the entire
-# operation using RZ as the rounding mode to see what the pre-rounded
-# result is. this case should be relatively rare.
-#
-	fmovm.x		FP_SCR1(%a6),&0x40	# load dst op into %fp1
-
-	clr.l		%d1			# clear scratch register
-	ori.b		&rz_mode*0x10,%d1	# force RZ rnd mode
-
-	fmov.l		%d1,%fpcr		# set FPCR
-	fmov.l		&0x0,%fpsr		# clear FPSR
-
-	fsgldiv.x	FP_SCR0(%a6),%fp1	# execute sgl divide
-
-	fmov.l		&0x0,%fpcr		# clear FPCR
-	fabs.x		%fp1			# make absolute value
-	fcmp.b		%fp1,&0x1		# is |result| < 1.b?
-	fbge.w		fsgldiv_normal_exit	# no; no underflow occurred
-	bra.w		fsgldiv_unfl		# yes; underflow occurred
-
-############################################################################
-
-#
-# Divide: inputs are not both normalized; what are they?
-#
-fsgldiv_not_norm:
-	mov.w		(tbl_fsgldiv_op.b,%pc,%d1.w*2),%d1
-	jmp		(tbl_fsgldiv_op.b,%pc,%d1.w*1)
-
-	swbeg		&48
-tbl_fsgldiv_op:
-	short		fsgldiv_norm		- tbl_fsgldiv_op # NORM / NORM
-	short		fsgldiv_inf_load	- tbl_fsgldiv_op # NORM / ZERO
-	short		fsgldiv_zero_load	- tbl_fsgldiv_op # NORM / INF
-	short		fsgldiv_res_qnan	- tbl_fsgldiv_op # NORM / QNAN
-	short		fsgldiv_norm		- tbl_fsgldiv_op # NORM / DENORM
-	short		fsgldiv_res_snan	- tbl_fsgldiv_op # NORM / SNAN
-	short		tbl_fsgldiv_op		- tbl_fsgldiv_op #
-	short		tbl_fsgldiv_op		- tbl_fsgldiv_op #
-
-	short		fsgldiv_zero_load	- tbl_fsgldiv_op # ZERO / NORM
-	short		fsgldiv_res_operr	- tbl_fsgldiv_op # ZERO / ZERO
-	short		fsgldiv_zero_load	- tbl_fsgldiv_op # ZERO / INF
-	short		fsgldiv_res_qnan	- tbl_fsgldiv_op # ZERO / QNAN
-	short		fsgldiv_zero_load	- tbl_fsgldiv_op # ZERO / DENORM
-	short		fsgldiv_res_snan	- tbl_fsgldiv_op # ZERO / SNAN
-	short		tbl_fsgldiv_op		- tbl_fsgldiv_op #
-	short		tbl_fsgldiv_op		- tbl_fsgldiv_op #
-
-	short		fsgldiv_inf_dst		- tbl_fsgldiv_op # INF / NORM
-	short		fsgldiv_inf_dst		- tbl_fsgldiv_op # INF / ZERO
-	short		fsgldiv_res_operr	- tbl_fsgldiv_op # INF / INF
-	short		fsgldiv_res_qnan	- tbl_fsgldiv_op # INF / QNAN
-	short		fsgldiv_inf_dst		- tbl_fsgldiv_op # INF / DENORM
-	short		fsgldiv_res_snan	- tbl_fsgldiv_op # INF / SNAN
-	short		tbl_fsgldiv_op		- tbl_fsgldiv_op #
-	short		tbl_fsgldiv_op		- tbl_fsgldiv_op #
-
-	short		fsgldiv_res_qnan	- tbl_fsgldiv_op # QNAN / NORM
-	short		fsgldiv_res_qnan	- tbl_fsgldiv_op # QNAN / ZERO
-	short		fsgldiv_res_qnan	- tbl_fsgldiv_op # QNAN / INF
-	short		fsgldiv_res_qnan	- tbl_fsgldiv_op # QNAN / QNAN
-	short		fsgldiv_res_qnan	- tbl_fsgldiv_op # QNAN / DENORM
-	short		fsgldiv_res_snan	- tbl_fsgldiv_op # QNAN / SNAN
-	short		tbl_fsgldiv_op		- tbl_fsgldiv_op #
-	short		tbl_fsgldiv_op		- tbl_fsgldiv_op #
-
-	short		fsgldiv_norm		- tbl_fsgldiv_op # DENORM / NORM
-	short		fsgldiv_inf_load	- tbl_fsgldiv_op # DENORM / ZERO
-	short		fsgldiv_zero_load	- tbl_fsgldiv_op # DENORM / INF
-	short		fsgldiv_res_qnan	- tbl_fsgldiv_op # DENORM / QNAN
-	short		fsgldiv_norm		- tbl_fsgldiv_op # DENORM / DENORM
-	short		fsgldiv_res_snan	- tbl_fsgldiv_op # DENORM / SNAN
-	short		tbl_fsgldiv_op		- tbl_fsgldiv_op #
-	short		tbl_fsgldiv_op		- tbl_fsgldiv_op #
-
-	short		fsgldiv_res_snan	- tbl_fsgldiv_op # SNAN / NORM
-	short		fsgldiv_res_snan	- tbl_fsgldiv_op # SNAN / ZERO
-	short		fsgldiv_res_snan	- tbl_fsgldiv_op # SNAN / INF
-	short		fsgldiv_res_snan	- tbl_fsgldiv_op # SNAN / QNAN
-	short		fsgldiv_res_snan	- tbl_fsgldiv_op # SNAN / DENORM
-	short		fsgldiv_res_snan	- tbl_fsgldiv_op # SNAN / SNAN
-	short		tbl_fsgldiv_op		- tbl_fsgldiv_op #
-	short		tbl_fsgldiv_op		- tbl_fsgldiv_op #
-
-fsgldiv_res_qnan:
-	bra.l		res_qnan
-fsgldiv_res_snan:
-	bra.l		res_snan
-fsgldiv_res_operr:
-	bra.l		res_operr
-fsgldiv_inf_load:
-	bra.l		fdiv_inf_load
-fsgldiv_zero_load:
-	bra.l		fdiv_zero_load
-fsgldiv_inf_dst:
-	bra.l		fdiv_inf_dst
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	fadd(): emulates the fadd instruction				#
-#	fsadd(): emulates the fadd instruction				#
-#	fdadd(): emulates the fdadd instruction				#
-#									#
-# XREF ****************************************************************	#
-#	addsub_scaler2() - scale the operands so they won't take exc	#
-#	ovf_res() - return default overflow result			#
-#	unf_res() - return default underflow result			#
-#	res_qnan() - set QNAN result					#
-#	res_snan() - set SNAN result					#
-#	res_operr() - set OPERR result					#
-#	scale_to_zero_src() - set src operand exponent equal to zero	#
-#	scale_to_zero_dst() - set dst operand exponent equal to zero	#
-#									#
-# INPUT ***************************************************************	#
-#	a0 = pointer to extended precision source operand		#
-#	a1 = pointer to extended precision destination operand		#
-#									#
-# OUTPUT **************************************************************	#
-#	fp0 = result							#
-#	fp1 = EXOP (if exception occurred)				#
-#									#
-# ALGORITHM ***********************************************************	#
-#	Handle NANs, infinities, and zeroes as special cases. Divide	#
-# norms into extended, single, and double precision.			#
-#	Do addition after scaling exponents such that exception won't	#
-# occur. Then, check result exponent to see if exception would have	#
-# occurred. If so, return default result and maybe EXOP. Else, insert	#
-# the correct result exponent and return. Set FPSR bits as appropriate.	#
-#									#
-#########################################################################
-
-	global		fsadd
-fsadd:
-	andi.b		&0x30,%d0		# clear rnd prec
-	ori.b		&s_mode*0x10,%d0	# insert sgl prec
-	bra.b		fadd
-
-	global		fdadd
-fdadd:
-	andi.b		&0x30,%d0		# clear rnd prec
-	ori.b		&d_mode*0x10,%d0	# insert dbl prec
-
-	global		fadd
-fadd:
-	mov.l		%d0,L_SCR3(%a6)		# store rnd info
-
-	clr.w		%d1
-	mov.b		DTAG(%a6),%d1
-	lsl.b		&0x3,%d1
-	or.b		STAG(%a6),%d1		# combine src tags
-
-	bne.w		fadd_not_norm		# optimize on non-norm input
-
-#
-# ADD: norms and denorms
-#
-fadd_norm:
-	bsr.l		addsub_scaler2		# scale exponents
-
-fadd_zero_entry:
-	fmovm.x		FP_SCR1(%a6),&0x80	# load dst op
-
-	fmov.l		&0x0,%fpsr		# clear FPSR
-	fmov.l		L_SCR3(%a6),%fpcr	# set FPCR
-
-	fadd.x		FP_SCR0(%a6),%fp0	# execute add
-
-	fmov.l		&0x0,%fpcr		# clear FPCR
-	fmov.l		%fpsr,%d1		# fetch INEX2,N,Z
-
-	or.l		%d1,USER_FPSR(%a6)	# save exc and ccode bits
-
-	fbeq.w		fadd_zero_exit		# if result is zero, end now
-
-	mov.l		%d2,-(%sp)		# save d2
-
-	fmovm.x		&0x01,-(%sp)		# save result to stack
-
-	mov.w		2+L_SCR3(%a6),%d1
-	lsr.b		&0x6,%d1
-
-	mov.w		(%sp),%d2		# fetch new sign, exp
-	andi.l		&0x7fff,%d2		# strip sign
-	sub.l		%d0,%d2			# add scale factor
-
-	cmp.l		%d2,(tbl_fadd_ovfl.b,%pc,%d1.w*4) # is it an overflow?
-	bge.b		fadd_ovfl		# yes
-
-	cmp.l		%d2,(tbl_fadd_unfl.b,%pc,%d1.w*4) # is it an underflow?
-	blt.w		fadd_unfl		# yes
-	beq.w		fadd_may_unfl		# maybe; go find out
-
-fadd_normal:
-	mov.w		(%sp),%d1
-	andi.w		&0x8000,%d1		# keep sign
-	or.w		%d2,%d1			# concat sign,new exp
-	mov.w		%d1,(%sp)		# insert new exponent
-
-	fmovm.x		(%sp)+,&0x80		# return result in fp0
-
-	mov.l		(%sp)+,%d2		# restore d2
-	rts
-
-fadd_zero_exit:
-#	fmov.s		&0x00000000,%fp0	# return zero in fp0
-	rts
-
-tbl_fadd_ovfl:
-	long		0x7fff			# ext ovfl
-	long		0x407f			# sgl ovfl
-	long		0x43ff			# dbl ovfl
-
-tbl_fadd_unfl:
-	long	        0x0000			# ext unfl
-	long		0x3f81			# sgl unfl
-	long		0x3c01			# dbl unfl
-
-fadd_ovfl:
-	or.l		&ovfl_inx_mask,USER_FPSR(%a6) # set ovfl/aovfl/ainex
-
-	mov.b		FPCR_ENABLE(%a6),%d1
-	andi.b		&0x13,%d1		# is OVFL or INEX enabled?
-	bne.b		fadd_ovfl_ena		# yes
-
-	add.l		&0xc,%sp
-fadd_ovfl_dis:
-	btst		&neg_bit,FPSR_CC(%a6)	# is result negative?
-	sne		%d1			# set sign param accordingly
-	mov.l		L_SCR3(%a6),%d0		# pass prec:rnd
-	bsr.l		ovf_res			# calculate default result
-	or.b		%d0,FPSR_CC(%a6)	# set INF,N if applicable
-	fmovm.x		(%a0),&0x80		# return default result in fp0
-	mov.l		(%sp)+,%d2		# restore d2
-	rts
-
-fadd_ovfl_ena:
-	mov.b		L_SCR3(%a6),%d1
-	andi.b		&0xc0,%d1		# is precision extended?
-	bne.b		fadd_ovfl_ena_sd	# no; prec = sgl or dbl
-
-fadd_ovfl_ena_cont:
-	mov.w		(%sp),%d1
-	andi.w		&0x8000,%d1		# keep sign
-	subi.l		&0x6000,%d2		# add extra bias
-	andi.w		&0x7fff,%d2
-	or.w		%d2,%d1			# concat sign,new exp
-	mov.w		%d1,(%sp)		# insert new exponent
-
-	fmovm.x		(%sp)+,&0x40		# return EXOP in fp1
-	bra.b		fadd_ovfl_dis
-
-fadd_ovfl_ena_sd:
-	fmovm.x		FP_SCR1(%a6),&0x80	# load dst op
-
-	mov.l		L_SCR3(%a6),%d1
-	andi.b		&0x30,%d1		# keep rnd mode
-	fmov.l		%d1,%fpcr		# set FPCR
-
-	fadd.x		FP_SCR0(%a6),%fp0	# execute add
-
-	fmov.l		&0x0,%fpcr		# clear FPCR
-
-	add.l		&0xc,%sp
-	fmovm.x		&0x01,-(%sp)
-	bra.b		fadd_ovfl_ena_cont
-
-fadd_unfl:
-	bset		&unfl_bit,FPSR_EXCEPT(%a6) # set unfl exc bit
-
-	add.l		&0xc,%sp
-
-	fmovm.x		FP_SCR1(%a6),&0x80	# load dst op
-
-	fmov.l		&rz_mode*0x10,%fpcr	# set FPCR
-	fmov.l		&0x0,%fpsr		# clear FPSR
-
-	fadd.x		FP_SCR0(%a6),%fp0	# execute add
-
-	fmov.l		&0x0,%fpcr		# clear FPCR
-	fmov.l		%fpsr,%d1		# save status
-
-	or.l		%d1,USER_FPSR(%a6)	# save INEX,N
-
-	mov.b		FPCR_ENABLE(%a6),%d1
-	andi.b		&0x0b,%d1		# is UNFL or INEX enabled?
-	bne.b		fadd_unfl_ena		# yes
-
-fadd_unfl_dis:
-	fmovm.x		&0x80,FP_SCR0(%a6)	# store out result
-
-	lea		FP_SCR0(%a6),%a0	# pass: result addr
-	mov.l		L_SCR3(%a6),%d1		# pass: rnd prec,mode
-	bsr.l		unf_res			# calculate default result
-	or.b		%d0,FPSR_CC(%a6)	# 'Z' bit may have been set
-	fmovm.x		FP_SCR0(%a6),&0x80	# return default result in fp0
-	mov.l		(%sp)+,%d2		# restore d2
-	rts
-
-fadd_unfl_ena:
-	fmovm.x		FP_SCR1(%a6),&0x40	# load dst op
-
-	mov.l		L_SCR3(%a6),%d1
-	andi.b		&0xc0,%d1		# is precision extended?
-	bne.b		fadd_unfl_ena_sd	# no; sgl or dbl
-
-	fmov.l		L_SCR3(%a6),%fpcr	# set FPCR
-
-fadd_unfl_ena_cont:
-	fmov.l		&0x0,%fpsr		# clear FPSR
-
-	fadd.x		FP_SCR0(%a6),%fp1	# execute multiply
-
-	fmov.l		&0x0,%fpcr		# clear FPCR
-
-	fmovm.x		&0x40,FP_SCR0(%a6)	# save result to stack
-	mov.w		FP_SCR0_EX(%a6),%d1	# fetch {sgn,exp}
-	mov.l		%d1,%d2			# make a copy
-	andi.l		&0x7fff,%d1		# strip sign
-	andi.w		&0x8000,%d2		# keep old sign
-	sub.l		%d0,%d1			# add scale factor
-	addi.l		&0x6000,%d1		# add new bias
-	andi.w		&0x7fff,%d1		# clear top bit
-	or.w		%d2,%d1			# concat sign,new exp
-	mov.w		%d1,FP_SCR0_EX(%a6)	# insert new exponent
-	fmovm.x		FP_SCR0(%a6),&0x40	# return EXOP in fp1
-	bra.w		fadd_unfl_dis
-
-fadd_unfl_ena_sd:
-	mov.l		L_SCR3(%a6),%d1
-	andi.b		&0x30,%d1		# use only rnd mode
-	fmov.l		%d1,%fpcr		# set FPCR
-
-	bra.b		fadd_unfl_ena_cont
-
-#
-# result is equal to the smallest normalized number in the selected precision
-# if the precision is extended, this result could not have come from an
-# underflow that rounded up.
-#
-fadd_may_unfl:
-	mov.l		L_SCR3(%a6),%d1
-	andi.b		&0xc0,%d1
-	beq.w		fadd_normal		# yes; no underflow occurred
-
-	mov.l		0x4(%sp),%d1		# extract hi(man)
-	cmpi.l		%d1,&0x80000000		# is hi(man) = 0x80000000?
-	bne.w		fadd_normal		# no; no underflow occurred
-
-	tst.l		0x8(%sp)		# is lo(man) = 0x0?
-	bne.w		fadd_normal		# no; no underflow occurred
-
-	btst		&inex2_bit,FPSR_EXCEPT(%a6) # is INEX2 set?
-	beq.w		fadd_normal		# no; no underflow occurred
-
-#
-# ok, so now the result has a exponent equal to the smallest normalized
-# exponent for the selected precision. also, the mantissa is equal to
-# 0x8000000000000000 and this mantissa is the result of rounding non-zero
-# g,r,s.
-# now, we must determine whether the pre-rounded result was an underflow
-# rounded "up" or a normalized number rounded "down".
-# so, we do this be re-executing the add using RZ as the rounding mode and
-# seeing if the new result is smaller or equal to the current result.
-#
-	fmovm.x		FP_SCR1(%a6),&0x40	# load dst op into fp1
-
-	mov.l		L_SCR3(%a6),%d1
-	andi.b		&0xc0,%d1		# keep rnd prec
-	ori.b		&rz_mode*0x10,%d1	# insert rnd mode
-	fmov.l		%d1,%fpcr		# set FPCR
-	fmov.l		&0x0,%fpsr		# clear FPSR
-
-	fadd.x		FP_SCR0(%a6),%fp1	# execute add
-
-	fmov.l		&0x0,%fpcr		# clear FPCR
-
-	fabs.x		%fp0			# compare absolute values
-	fabs.x		%fp1
-	fcmp.x		%fp0,%fp1		# is first result > second?
-
-	fbgt.w		fadd_unfl		# yes; it's an underflow
-	bra.w		fadd_normal		# no; it's not an underflow
-
-##########################################################################
-
-#
-# Add: inputs are not both normalized; what are they?
-#
-fadd_not_norm:
-	mov.w		(tbl_fadd_op.b,%pc,%d1.w*2),%d1
-	jmp		(tbl_fadd_op.b,%pc,%d1.w*1)
-
-	swbeg		&48
-tbl_fadd_op:
-	short		fadd_norm	- tbl_fadd_op # NORM + NORM
-	short		fadd_zero_src	- tbl_fadd_op # NORM + ZERO
-	short		fadd_inf_src	- tbl_fadd_op # NORM + INF
-	short		fadd_res_qnan	- tbl_fadd_op # NORM + QNAN
-	short		fadd_norm	- tbl_fadd_op # NORM + DENORM
-	short		fadd_res_snan	- tbl_fadd_op # NORM + SNAN
-	short		tbl_fadd_op	- tbl_fadd_op #
-	short		tbl_fadd_op	- tbl_fadd_op #
-
-	short		fadd_zero_dst	- tbl_fadd_op # ZERO + NORM
-	short		fadd_zero_2	- tbl_fadd_op # ZERO + ZERO
-	short		fadd_inf_src	- tbl_fadd_op # ZERO + INF
-	short		fadd_res_qnan	- tbl_fadd_op # NORM + QNAN
-	short		fadd_zero_dst	- tbl_fadd_op # ZERO + DENORM
-	short		fadd_res_snan	- tbl_fadd_op # NORM + SNAN
-	short		tbl_fadd_op	- tbl_fadd_op #
-	short		tbl_fadd_op	- tbl_fadd_op #
-
-	short		fadd_inf_dst	- tbl_fadd_op # INF + NORM
-	short		fadd_inf_dst	- tbl_fadd_op # INF + ZERO
-	short		fadd_inf_2	- tbl_fadd_op # INF + INF
-	short		fadd_res_qnan	- tbl_fadd_op # NORM + QNAN
-	short		fadd_inf_dst	- tbl_fadd_op # INF + DENORM
-	short		fadd_res_snan	- tbl_fadd_op # NORM + SNAN
-	short		tbl_fadd_op	- tbl_fadd_op #
-	short		tbl_fadd_op	- tbl_fadd_op #
-
-	short		fadd_res_qnan	- tbl_fadd_op # QNAN + NORM
-	short		fadd_res_qnan	- tbl_fadd_op # QNAN + ZERO
-	short		fadd_res_qnan	- tbl_fadd_op # QNAN + INF
-	short		fadd_res_qnan	- tbl_fadd_op # QNAN + QNAN
-	short		fadd_res_qnan	- tbl_fadd_op # QNAN + DENORM
-	short		fadd_res_snan	- tbl_fadd_op # QNAN + SNAN
-	short		tbl_fadd_op	- tbl_fadd_op #
-	short		tbl_fadd_op	- tbl_fadd_op #
-
-	short		fadd_norm	- tbl_fadd_op # DENORM + NORM
-	short		fadd_zero_src	- tbl_fadd_op # DENORM + ZERO
-	short		fadd_inf_src	- tbl_fadd_op # DENORM + INF
-	short		fadd_res_qnan	- tbl_fadd_op # NORM + QNAN
-	short		fadd_norm	- tbl_fadd_op # DENORM + DENORM
-	short		fadd_res_snan	- tbl_fadd_op # NORM + SNAN
-	short		tbl_fadd_op	- tbl_fadd_op #
-	short		tbl_fadd_op	- tbl_fadd_op #
-
-	short		fadd_res_snan	- tbl_fadd_op # SNAN + NORM
-	short		fadd_res_snan	- tbl_fadd_op # SNAN + ZERO
-	short		fadd_res_snan	- tbl_fadd_op # SNAN + INF
-	short		fadd_res_snan	- tbl_fadd_op # SNAN + QNAN
-	short		fadd_res_snan	- tbl_fadd_op # SNAN + DENORM
-	short		fadd_res_snan	- tbl_fadd_op # SNAN + SNAN
-	short		tbl_fadd_op	- tbl_fadd_op #
-	short		tbl_fadd_op	- tbl_fadd_op #
-
-fadd_res_qnan:
-	bra.l		res_qnan
-fadd_res_snan:
-	bra.l		res_snan
-
-#
-# both operands are ZEROes
-#
-fadd_zero_2:
-	mov.b		SRC_EX(%a0),%d0		# are the signs opposite
-	mov.b		DST_EX(%a1),%d1
-	eor.b		%d0,%d1
-	bmi.w		fadd_zero_2_chk_rm	# weed out (-ZERO)+(+ZERO)
-
-# the signs are the same. so determine whether they are positive or negative
-# and return the appropriately signed zero.
-	tst.b		%d0			# are ZEROes positive or negative?
-	bmi.b		fadd_zero_rm		# negative
-	fmov.s		&0x00000000,%fp0	# return +ZERO
-	mov.b		&z_bmask,FPSR_CC(%a6)	# set Z
-	rts
-
-#
-# the ZEROes have opposite signs:
-# - Therefore, we return +ZERO if the rounding modes are RN,RZ, or RP.
-# - -ZERO is returned in the case of RM.
-#
-fadd_zero_2_chk_rm:
-	mov.b		3+L_SCR3(%a6),%d1
-	andi.b		&0x30,%d1		# extract rnd mode
-	cmpi.b		%d1,&rm_mode*0x10	# is rnd mode == RM?
-	beq.b		fadd_zero_rm		# yes
-	fmov.s		&0x00000000,%fp0	# return +ZERO
-	mov.b		&z_bmask,FPSR_CC(%a6)	# set Z
-	rts
-
-fadd_zero_rm:
-	fmov.s		&0x80000000,%fp0	# return -ZERO
-	mov.b		&neg_bmask+z_bmask,FPSR_CC(%a6) # set NEG/Z
-	rts
-
-#
-# one operand is a ZERO and the other is a DENORM or NORM. scale
-# the DENORM or NORM and jump to the regular fadd routine.
-#
-fadd_zero_dst:
-	mov.w		SRC_EX(%a0),FP_SCR0_EX(%a6)
-	mov.l		SRC_HI(%a0),FP_SCR0_HI(%a6)
-	mov.l		SRC_LO(%a0),FP_SCR0_LO(%a6)
-	bsr.l		scale_to_zero_src	# scale the operand
-	clr.w		FP_SCR1_EX(%a6)
-	clr.l		FP_SCR1_HI(%a6)
-	clr.l		FP_SCR1_LO(%a6)
-	bra.w		fadd_zero_entry		# go execute fadd
-
-fadd_zero_src:
-	mov.w		DST_EX(%a1),FP_SCR1_EX(%a6)
-	mov.l		DST_HI(%a1),FP_SCR1_HI(%a6)
-	mov.l		DST_LO(%a1),FP_SCR1_LO(%a6)
-	bsr.l		scale_to_zero_dst	# scale the operand
-	clr.w		FP_SCR0_EX(%a6)
-	clr.l		FP_SCR0_HI(%a6)
-	clr.l		FP_SCR0_LO(%a6)
-	bra.w		fadd_zero_entry		# go execute fadd
-
-#
-# both operands are INFs. an OPERR will result if the INFs have
-# different signs. else, an INF of the same sign is returned
-#
-fadd_inf_2:
-	mov.b		SRC_EX(%a0),%d0		# exclusive or the signs
-	mov.b		DST_EX(%a1),%d1
-	eor.b		%d1,%d0
-	bmi.l		res_operr		# weed out (-INF)+(+INF)
-
-# ok, so it's not an OPERR. but, we do have to remember to return the
-# src INF since that's where the 881/882 gets the j-bit from...
-
-#
-# operands are INF and one of {ZERO, INF, DENORM, NORM}
-#
-fadd_inf_src:
-	fmovm.x		SRC(%a0),&0x80		# return src INF
-	tst.b		SRC_EX(%a0)		# is INF positive?
-	bpl.b		fadd_inf_done		# yes; we're done
-	mov.b		&neg_bmask+inf_bmask,FPSR_CC(%a6) # set INF/NEG
-	rts
-
-#
-# operands are INF and one of {ZERO, INF, DENORM, NORM}
-#
-fadd_inf_dst:
-	fmovm.x		DST(%a1),&0x80		# return dst INF
-	tst.b		DST_EX(%a1)		# is INF positive?
-	bpl.b		fadd_inf_done		# yes; we're done
-	mov.b		&neg_bmask+inf_bmask,FPSR_CC(%a6) # set INF/NEG
-	rts
-
-fadd_inf_done:
-	mov.b		&inf_bmask,FPSR_CC(%a6) # set INF
-	rts
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	fsub(): emulates the fsub instruction				#
-#	fssub(): emulates the fssub instruction				#
-#	fdsub(): emulates the fdsub instruction				#
-#									#
-# XREF ****************************************************************	#
-#	addsub_scaler2() - scale the operands so they won't take exc	#
-#	ovf_res() - return default overflow result			#
-#	unf_res() - return default underflow result			#
-#	res_qnan() - set QNAN result					#
-#	res_snan() - set SNAN result					#
-#	res_operr() - set OPERR result					#
-#	scale_to_zero_src() - set src operand exponent equal to zero	#
-#	scale_to_zero_dst() - set dst operand exponent equal to zero	#
-#									#
-# INPUT ***************************************************************	#
-#	a0 = pointer to extended precision source operand		#
-#	a1 = pointer to extended precision destination operand		#
-#									#
-# OUTPUT **************************************************************	#
-#	fp0 = result							#
-#	fp1 = EXOP (if exception occurred)				#
-#									#
-# ALGORITHM ***********************************************************	#
-#	Handle NANs, infinities, and zeroes as special cases. Divide	#
-# norms into extended, single, and double precision.			#
-#	Do subtraction after scaling exponents such that exception won't#
-# occur. Then, check result exponent to see if exception would have	#
-# occurred. If so, return default result and maybe EXOP. Else, insert	#
-# the correct result exponent and return. Set FPSR bits as appropriate.	#
-#									#
-#########################################################################
-
-	global		fssub
-fssub:
-	andi.b		&0x30,%d0		# clear rnd prec
-	ori.b		&s_mode*0x10,%d0	# insert sgl prec
-	bra.b		fsub
-
-	global		fdsub
-fdsub:
-	andi.b		&0x30,%d0		# clear rnd prec
-	ori.b		&d_mode*0x10,%d0	# insert dbl prec
-
-	global		fsub
-fsub:
-	mov.l		%d0,L_SCR3(%a6)		# store rnd info
-
-	clr.w		%d1
-	mov.b		DTAG(%a6),%d1
-	lsl.b		&0x3,%d1
-	or.b		STAG(%a6),%d1		# combine src tags
-
-	bne.w		fsub_not_norm		# optimize on non-norm input
-
-#
-# SUB: norms and denorms
-#
-fsub_norm:
-	bsr.l		addsub_scaler2		# scale exponents
-
-fsub_zero_entry:
-	fmovm.x		FP_SCR1(%a6),&0x80	# load dst op
-
-	fmov.l		&0x0,%fpsr		# clear FPSR
-	fmov.l		L_SCR3(%a6),%fpcr	# set FPCR
-
-	fsub.x		FP_SCR0(%a6),%fp0	# execute subtract
-
-	fmov.l		&0x0,%fpcr		# clear FPCR
-	fmov.l		%fpsr,%d1		# fetch INEX2, N, Z
-
-	or.l		%d1,USER_FPSR(%a6)	# save exc and ccode bits
-
-	fbeq.w		fsub_zero_exit		# if result zero, end now
-
-	mov.l		%d2,-(%sp)		# save d2
-
-	fmovm.x		&0x01,-(%sp)		# save result to stack
-
-	mov.w		2+L_SCR3(%a6),%d1
-	lsr.b		&0x6,%d1
-
-	mov.w		(%sp),%d2		# fetch new exponent
-	andi.l		&0x7fff,%d2		# strip sign
-	sub.l		%d0,%d2			# add scale factor
-
-	cmp.l		%d2,(tbl_fsub_ovfl.b,%pc,%d1.w*4) # is it an overflow?
-	bge.b		fsub_ovfl		# yes
-
-	cmp.l		%d2,(tbl_fsub_unfl.b,%pc,%d1.w*4) # is it an underflow?
-	blt.w		fsub_unfl		# yes
-	beq.w		fsub_may_unfl		# maybe; go find out
-
-fsub_normal:
-	mov.w		(%sp),%d1
-	andi.w		&0x8000,%d1		# keep sign
-	or.w		%d2,%d1			# insert new exponent
-	mov.w		%d1,(%sp)		# insert new exponent
-
-	fmovm.x		(%sp)+,&0x80		# return result in fp0
-
-	mov.l		(%sp)+,%d2		# restore d2
-	rts
-
-fsub_zero_exit:
-#	fmov.s		&0x00000000,%fp0	# return zero in fp0
-	rts
-
-tbl_fsub_ovfl:
-	long		0x7fff			# ext ovfl
-	long		0x407f			# sgl ovfl
-	long		0x43ff			# dbl ovfl
-
-tbl_fsub_unfl:
-	long	        0x0000			# ext unfl
-	long		0x3f81			# sgl unfl
-	long		0x3c01			# dbl unfl
-
-fsub_ovfl:
-	or.l		&ovfl_inx_mask,USER_FPSR(%a6) # set ovfl/aovfl/ainex
-
-	mov.b		FPCR_ENABLE(%a6),%d1
-	andi.b		&0x13,%d1		# is OVFL or INEX enabled?
-	bne.b		fsub_ovfl_ena		# yes
-
-	add.l		&0xc,%sp
-fsub_ovfl_dis:
-	btst		&neg_bit,FPSR_CC(%a6)	# is result negative?
-	sne		%d1			# set sign param accordingly
-	mov.l		L_SCR3(%a6),%d0		# pass prec:rnd
-	bsr.l		ovf_res			# calculate default result
-	or.b		%d0,FPSR_CC(%a6)	# set INF,N if applicable
-	fmovm.x		(%a0),&0x80		# return default result in fp0
-	mov.l		(%sp)+,%d2		# restore d2
-	rts
-
-fsub_ovfl_ena:
-	mov.b		L_SCR3(%a6),%d1
-	andi.b		&0xc0,%d1		# is precision extended?
-	bne.b		fsub_ovfl_ena_sd	# no
-
-fsub_ovfl_ena_cont:
-	mov.w		(%sp),%d1		# fetch {sgn,exp}
-	andi.w		&0x8000,%d1		# keep sign
-	subi.l		&0x6000,%d2		# subtract new bias
-	andi.w		&0x7fff,%d2		# clear top bit
-	or.w		%d2,%d1			# concat sign,exp
-	mov.w		%d1,(%sp)		# insert new exponent
-
-	fmovm.x		(%sp)+,&0x40		# return EXOP in fp1
-	bra.b		fsub_ovfl_dis
-
-fsub_ovfl_ena_sd:
-	fmovm.x		FP_SCR1(%a6),&0x80	# load dst op
-
-	mov.l		L_SCR3(%a6),%d1
-	andi.b		&0x30,%d1		# clear rnd prec
-	fmov.l		%d1,%fpcr		# set FPCR
-
-	fsub.x		FP_SCR0(%a6),%fp0	# execute subtract
-
-	fmov.l		&0x0,%fpcr		# clear FPCR
-
-	add.l		&0xc,%sp
-	fmovm.x		&0x01,-(%sp)
-	bra.b		fsub_ovfl_ena_cont
-
-fsub_unfl:
-	bset		&unfl_bit,FPSR_EXCEPT(%a6) # set unfl exc bit
-
-	add.l		&0xc,%sp
-
-	fmovm.x		FP_SCR1(%a6),&0x80	# load dst op
-
-	fmov.l		&rz_mode*0x10,%fpcr	# set FPCR
-	fmov.l		&0x0,%fpsr		# clear FPSR
-
-	fsub.x		FP_SCR0(%a6),%fp0	# execute subtract
-
-	fmov.l		&0x0,%fpcr		# clear FPCR
-	fmov.l		%fpsr,%d1		# save status
-
-	or.l		%d1,USER_FPSR(%a6)
-
-	mov.b		FPCR_ENABLE(%a6),%d1
-	andi.b		&0x0b,%d1		# is UNFL or INEX enabled?
-	bne.b		fsub_unfl_ena		# yes
-
-fsub_unfl_dis:
-	fmovm.x		&0x80,FP_SCR0(%a6)	# store out result
-
-	lea		FP_SCR0(%a6),%a0	# pass: result addr
-	mov.l		L_SCR3(%a6),%d1		# pass: rnd prec,mode
-	bsr.l		unf_res			# calculate default result
-	or.b		%d0,FPSR_CC(%a6)	# 'Z' may have been set
-	fmovm.x		FP_SCR0(%a6),&0x80	# return default result in fp0
-	mov.l		(%sp)+,%d2		# restore d2
-	rts
-
-fsub_unfl_ena:
-	fmovm.x		FP_SCR1(%a6),&0x40
-
-	mov.l		L_SCR3(%a6),%d1
-	andi.b		&0xc0,%d1		# is precision extended?
-	bne.b		fsub_unfl_ena_sd	# no
-
-	fmov.l		L_SCR3(%a6),%fpcr	# set FPCR
-
-fsub_unfl_ena_cont:
-	fmov.l		&0x0,%fpsr		# clear FPSR
-
-	fsub.x		FP_SCR0(%a6),%fp1	# execute subtract
-
-	fmov.l		&0x0,%fpcr		# clear FPCR
-
-	fmovm.x		&0x40,FP_SCR0(%a6)	# store result to stack
-	mov.w		FP_SCR0_EX(%a6),%d1	# fetch {sgn,exp}
-	mov.l		%d1,%d2			# make a copy
-	andi.l		&0x7fff,%d1		# strip sign
-	andi.w		&0x8000,%d2		# keep old sign
-	sub.l		%d0,%d1			# add scale factor
-	addi.l		&0x6000,%d1		# subtract new bias
-	andi.w		&0x7fff,%d1		# clear top bit
-	or.w		%d2,%d1			# concat sgn,exp
-	mov.w		%d1,FP_SCR0_EX(%a6)	# insert new exponent
-	fmovm.x		FP_SCR0(%a6),&0x40	# return EXOP in fp1
-	bra.w		fsub_unfl_dis
-
-fsub_unfl_ena_sd:
-	mov.l		L_SCR3(%a6),%d1
-	andi.b		&0x30,%d1		# clear rnd prec
-	fmov.l		%d1,%fpcr		# set FPCR
-
-	bra.b		fsub_unfl_ena_cont
-
-#
-# result is equal to the smallest normalized number in the selected precision
-# if the precision is extended, this result could not have come from an
-# underflow that rounded up.
-#
-fsub_may_unfl:
-	mov.l		L_SCR3(%a6),%d1
-	andi.b		&0xc0,%d1		# fetch rnd prec
-	beq.w		fsub_normal		# yes; no underflow occurred
-
-	mov.l		0x4(%sp),%d1
-	cmpi.l		%d1,&0x80000000		# is hi(man) = 0x80000000?
-	bne.w		fsub_normal		# no; no underflow occurred
-
-	tst.l		0x8(%sp)		# is lo(man) = 0x0?
-	bne.w		fsub_normal		# no; no underflow occurred
-
-	btst		&inex2_bit,FPSR_EXCEPT(%a6) # is INEX2 set?
-	beq.w		fsub_normal		# no; no underflow occurred
-
-#
-# ok, so now the result has a exponent equal to the smallest normalized
-# exponent for the selected precision. also, the mantissa is equal to
-# 0x8000000000000000 and this mantissa is the result of rounding non-zero
-# g,r,s.
-# now, we must determine whether the pre-rounded result was an underflow
-# rounded "up" or a normalized number rounded "down".
-# so, we do this be re-executing the add using RZ as the rounding mode and
-# seeing if the new result is smaller or equal to the current result.
-#
-	fmovm.x		FP_SCR1(%a6),&0x40	# load dst op into fp1
-
-	mov.l		L_SCR3(%a6),%d1
-	andi.b		&0xc0,%d1		# keep rnd prec
-	ori.b		&rz_mode*0x10,%d1	# insert rnd mode
-	fmov.l		%d1,%fpcr		# set FPCR
-	fmov.l		&0x0,%fpsr		# clear FPSR
-
-	fsub.x		FP_SCR0(%a6),%fp1	# execute subtract
-
-	fmov.l		&0x0,%fpcr		# clear FPCR
-
-	fabs.x		%fp0			# compare absolute values
-	fabs.x		%fp1
-	fcmp.x		%fp0,%fp1		# is first result > second?
-
-	fbgt.w		fsub_unfl		# yes; it's an underflow
-	bra.w		fsub_normal		# no; it's not an underflow
-
-##########################################################################
-
-#
-# Sub: inputs are not both normalized; what are they?
-#
-fsub_not_norm:
-	mov.w		(tbl_fsub_op.b,%pc,%d1.w*2),%d1
-	jmp		(tbl_fsub_op.b,%pc,%d1.w*1)
-
-	swbeg		&48
-tbl_fsub_op:
-	short		fsub_norm	- tbl_fsub_op # NORM - NORM
-	short		fsub_zero_src	- tbl_fsub_op # NORM - ZERO
-	short		fsub_inf_src	- tbl_fsub_op # NORM - INF
-	short		fsub_res_qnan	- tbl_fsub_op # NORM - QNAN
-	short		fsub_norm	- tbl_fsub_op # NORM - DENORM
-	short		fsub_res_snan	- tbl_fsub_op # NORM - SNAN
-	short		tbl_fsub_op	- tbl_fsub_op #
-	short		tbl_fsub_op	- tbl_fsub_op #
-
-	short		fsub_zero_dst	- tbl_fsub_op # ZERO - NORM
-	short		fsub_zero_2	- tbl_fsub_op # ZERO - ZERO
-	short		fsub_inf_src	- tbl_fsub_op # ZERO - INF
-	short		fsub_res_qnan	- tbl_fsub_op # NORM - QNAN
-	short		fsub_zero_dst	- tbl_fsub_op # ZERO - DENORM
-	short		fsub_res_snan	- tbl_fsub_op # NORM - SNAN
-	short		tbl_fsub_op	- tbl_fsub_op #
-	short		tbl_fsub_op	- tbl_fsub_op #
-
-	short		fsub_inf_dst	- tbl_fsub_op # INF - NORM
-	short		fsub_inf_dst	- tbl_fsub_op # INF - ZERO
-	short		fsub_inf_2	- tbl_fsub_op # INF - INF
-	short		fsub_res_qnan	- tbl_fsub_op # NORM - QNAN
-	short		fsub_inf_dst	- tbl_fsub_op # INF - DENORM
-	short		fsub_res_snan	- tbl_fsub_op # NORM - SNAN
-	short		tbl_fsub_op	- tbl_fsub_op #
-	short		tbl_fsub_op	- tbl_fsub_op #
-
-	short		fsub_res_qnan	- tbl_fsub_op # QNAN - NORM
-	short		fsub_res_qnan	- tbl_fsub_op # QNAN - ZERO
-	short		fsub_res_qnan	- tbl_fsub_op # QNAN - INF
-	short		fsub_res_qnan	- tbl_fsub_op # QNAN - QNAN
-	short		fsub_res_qnan	- tbl_fsub_op # QNAN - DENORM
-	short		fsub_res_snan	- tbl_fsub_op # QNAN - SNAN
-	short		tbl_fsub_op	- tbl_fsub_op #
-	short		tbl_fsub_op	- tbl_fsub_op #
-
-	short		fsub_norm	- tbl_fsub_op # DENORM - NORM
-	short		fsub_zero_src	- tbl_fsub_op # DENORM - ZERO
-	short		fsub_inf_src	- tbl_fsub_op # DENORM - INF
-	short		fsub_res_qnan	- tbl_fsub_op # NORM - QNAN
-	short		fsub_norm	- tbl_fsub_op # DENORM - DENORM
-	short		fsub_res_snan	- tbl_fsub_op # NORM - SNAN
-	short		tbl_fsub_op	- tbl_fsub_op #
-	short		tbl_fsub_op	- tbl_fsub_op #
-
-	short		fsub_res_snan	- tbl_fsub_op # SNAN - NORM
-	short		fsub_res_snan	- tbl_fsub_op # SNAN - ZERO
-	short		fsub_res_snan	- tbl_fsub_op # SNAN - INF
-	short		fsub_res_snan	- tbl_fsub_op # SNAN - QNAN
-	short		fsub_res_snan	- tbl_fsub_op # SNAN - DENORM
-	short		fsub_res_snan	- tbl_fsub_op # SNAN - SNAN
-	short		tbl_fsub_op	- tbl_fsub_op #
-	short		tbl_fsub_op	- tbl_fsub_op #
-
-fsub_res_qnan:
-	bra.l		res_qnan
-fsub_res_snan:
-	bra.l		res_snan
-
-#
-# both operands are ZEROes
-#
-fsub_zero_2:
-	mov.b		SRC_EX(%a0),%d0
-	mov.b		DST_EX(%a1),%d1
-	eor.b		%d1,%d0
-	bpl.b		fsub_zero_2_chk_rm
-
-# the signs are opposite, so, return a ZERO w/ the sign of the dst ZERO
-	tst.b		%d0			# is dst negative?
-	bmi.b		fsub_zero_2_rm		# yes
-	fmov.s		&0x00000000,%fp0	# no; return +ZERO
-	mov.b		&z_bmask,FPSR_CC(%a6)	# set Z
-	rts
-
-#
-# the ZEROes have the same signs:
-# - Therefore, we return +ZERO if the rounding mode is RN,RZ, or RP
-# - -ZERO is returned in the case of RM.
-#
-fsub_zero_2_chk_rm:
-	mov.b		3+L_SCR3(%a6),%d1
-	andi.b		&0x30,%d1		# extract rnd mode
-	cmpi.b		%d1,&rm_mode*0x10	# is rnd mode = RM?
-	beq.b		fsub_zero_2_rm		# yes
-	fmov.s		&0x00000000,%fp0	# no; return +ZERO
-	mov.b		&z_bmask,FPSR_CC(%a6)	# set Z
-	rts
-
-fsub_zero_2_rm:
-	fmov.s		&0x80000000,%fp0	# return -ZERO
-	mov.b		&z_bmask+neg_bmask,FPSR_CC(%a6)	# set Z/NEG
-	rts
-
-#
-# one operand is a ZERO and the other is a DENORM or a NORM.
-# scale the DENORM or NORM and jump to the regular fsub routine.
-#
-fsub_zero_dst:
-	mov.w		SRC_EX(%a0),FP_SCR0_EX(%a6)
-	mov.l		SRC_HI(%a0),FP_SCR0_HI(%a6)
-	mov.l		SRC_LO(%a0),FP_SCR0_LO(%a6)
-	bsr.l		scale_to_zero_src	# scale the operand
-	clr.w		FP_SCR1_EX(%a6)
-	clr.l		FP_SCR1_HI(%a6)
-	clr.l		FP_SCR1_LO(%a6)
-	bra.w		fsub_zero_entry		# go execute fsub
-
-fsub_zero_src:
-	mov.w		DST_EX(%a1),FP_SCR1_EX(%a6)
-	mov.l		DST_HI(%a1),FP_SCR1_HI(%a6)
-	mov.l		DST_LO(%a1),FP_SCR1_LO(%a6)
-	bsr.l		scale_to_zero_dst	# scale the operand
-	clr.w		FP_SCR0_EX(%a6)
-	clr.l		FP_SCR0_HI(%a6)
-	clr.l		FP_SCR0_LO(%a6)
-	bra.w		fsub_zero_entry		# go execute fsub
-
-#
-# both operands are INFs. an OPERR will result if the INFs have the
-# same signs. else,
-#
-fsub_inf_2:
-	mov.b		SRC_EX(%a0),%d0		# exclusive or the signs
-	mov.b		DST_EX(%a1),%d1
-	eor.b		%d1,%d0
-	bpl.l		res_operr		# weed out (-INF)+(+INF)
-
-# ok, so it's not an OPERR. but we do have to remember to return
-# the src INF since that's where the 881/882 gets the j-bit.
-
-fsub_inf_src:
-	fmovm.x		SRC(%a0),&0x80		# return src INF
-	fneg.x		%fp0			# invert sign
-	fbge.w		fsub_inf_done		# sign is now positive
-	mov.b		&neg_bmask+inf_bmask,FPSR_CC(%a6) # set INF/NEG
-	rts
-
-fsub_inf_dst:
-	fmovm.x		DST(%a1),&0x80		# return dst INF
-	tst.b		DST_EX(%a1)		# is INF negative?
-	bpl.b		fsub_inf_done		# no
-	mov.b		&neg_bmask+inf_bmask,FPSR_CC(%a6) # set INF/NEG
-	rts
-
-fsub_inf_done:
-	mov.b		&inf_bmask,FPSR_CC(%a6)	# set INF
-	rts
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	fsqrt(): emulates the fsqrt instruction				#
-#	fssqrt(): emulates the fssqrt instruction			#
-#	fdsqrt(): emulates the fdsqrt instruction			#
-#									#
-# XREF ****************************************************************	#
-#	scale_sqrt() - scale the source operand				#
-#	unf_res() - return default underflow result			#
-#	ovf_res() - return default overflow result			#
-#	res_qnan_1op() - return QNAN result				#
-#	res_snan_1op() - return SNAN result				#
-#									#
-# INPUT ***************************************************************	#
-#	a0 = pointer to extended precision source operand		#
-#	d0  rnd prec,mode						#
-#									#
-# OUTPUT **************************************************************	#
-#	fp0 = result							#
-#	fp1 = EXOP (if exception occurred)				#
-#									#
-# ALGORITHM ***********************************************************	#
-#	Handle NANs, infinities, and zeroes as special cases. Divide	#
-# norms/denorms into ext/sgl/dbl precision.				#
-#	For norms/denorms, scale the exponents such that a sqrt		#
-# instruction won't cause an exception. Use the regular fsqrt to	#
-# compute a result. Check if the regular operands would have taken	#
-# an exception. If so, return the default overflow/underflow result	#
-# and return the EXOP if exceptions are enabled. Else, scale the	#
-# result operand to the proper exponent.				#
-#									#
-#########################################################################
-
-	global		fssqrt
-fssqrt:
-	andi.b		&0x30,%d0		# clear rnd prec
-	ori.b		&s_mode*0x10,%d0	# insert sgl precision
-	bra.b		fsqrt
-
-	global		fdsqrt
-fdsqrt:
-	andi.b		&0x30,%d0		# clear rnd prec
-	ori.b		&d_mode*0x10,%d0	# insert dbl precision
-
-	global		fsqrt
-fsqrt:
-	mov.l		%d0,L_SCR3(%a6)		# store rnd info
-	clr.w		%d1
-	mov.b		STAG(%a6),%d1
-	bne.w		fsqrt_not_norm		# optimize on non-norm input
-
-#
-# SQUARE ROOT: norms and denorms ONLY!
-#
-fsqrt_norm:
-	tst.b		SRC_EX(%a0)		# is operand negative?
-	bmi.l		res_operr		# yes
-
-	andi.b		&0xc0,%d0		# is precision extended?
-	bne.b		fsqrt_not_ext		# no; go handle sgl or dbl
-
-	fmov.l		L_SCR3(%a6),%fpcr	# set FPCR
-	fmov.l		&0x0,%fpsr		# clear FPSR
-
-	fsqrt.x		(%a0),%fp0		# execute square root
-
-	fmov.l		%fpsr,%d1
-	or.l		%d1,USER_FPSR(%a6)	# set N,INEX
-
-	rts
-
-fsqrt_denorm:
-	tst.b		SRC_EX(%a0)		# is operand negative?
-	bmi.l		res_operr		# yes
-
-	andi.b		&0xc0,%d0		# is precision extended?
-	bne.b		fsqrt_not_ext		# no; go handle sgl or dbl
-
-	mov.w		SRC_EX(%a0),FP_SCR0_EX(%a6)
-	mov.l		SRC_HI(%a0),FP_SCR0_HI(%a6)
-	mov.l		SRC_LO(%a0),FP_SCR0_LO(%a6)
-
-	bsr.l		scale_sqrt		# calculate scale factor
-
-	bra.w		fsqrt_sd_normal
-
-#
-# operand is either single or double
-#
-fsqrt_not_ext:
-	cmpi.b		%d0,&s_mode*0x10	# separate sgl/dbl prec
-	bne.w		fsqrt_dbl
-
-#
-# operand is to be rounded to single precision
-#
-fsqrt_sgl:
-	mov.w		SRC_EX(%a0),FP_SCR0_EX(%a6)
-	mov.l		SRC_HI(%a0),FP_SCR0_HI(%a6)
-	mov.l		SRC_LO(%a0),FP_SCR0_LO(%a6)
-
-	bsr.l		scale_sqrt		# calculate scale factor
-
-	cmpi.l		%d0,&0x3fff-0x3f81	# will move in underflow?
-	beq.w		fsqrt_sd_may_unfl
-	bgt.w		fsqrt_sd_unfl		# yes; go handle underflow
-	cmpi.l		%d0,&0x3fff-0x407f	# will move in overflow?
-	beq.w		fsqrt_sd_may_ovfl	# maybe; go check
-	blt.w		fsqrt_sd_ovfl		# yes; go handle overflow
-
-#
-# operand will NOT overflow or underflow when moved in to the fp reg file
-#
-fsqrt_sd_normal:
-	fmov.l		&0x0,%fpsr		# clear FPSR
-	fmov.l		L_SCR3(%a6),%fpcr	# set FPCR
-
-	fsqrt.x		FP_SCR0(%a6),%fp0	# perform absolute
-
-	fmov.l		%fpsr,%d1		# save FPSR
-	fmov.l		&0x0,%fpcr		# clear FPCR
-
-	or.l		%d1,USER_FPSR(%a6)	# save INEX2,N
-
-fsqrt_sd_normal_exit:
-	mov.l		%d2,-(%sp)		# save d2
-	fmovm.x		&0x80,FP_SCR0(%a6)	# store out result
-	mov.w		FP_SCR0_EX(%a6),%d1	# load sgn,exp
-	mov.l		%d1,%d2			# make a copy
-	andi.l		&0x7fff,%d1		# strip sign
-	sub.l		%d0,%d1			# add scale factor
-	andi.w		&0x8000,%d2		# keep old sign
-	or.w		%d1,%d2			# concat old sign,new exp
-	mov.w		%d2,FP_SCR0_EX(%a6)	# insert new exponent
-	mov.l		(%sp)+,%d2		# restore d2
-	fmovm.x		FP_SCR0(%a6),&0x80	# return result in fp0
-	rts
-
-#
-# operand is to be rounded to double precision
-#
-fsqrt_dbl:
-	mov.w		SRC_EX(%a0),FP_SCR0_EX(%a6)
-	mov.l		SRC_HI(%a0),FP_SCR0_HI(%a6)
-	mov.l		SRC_LO(%a0),FP_SCR0_LO(%a6)
-
-	bsr.l		scale_sqrt		# calculate scale factor
-
-	cmpi.l		%d0,&0x3fff-0x3c01	# will move in underflow?
-	beq.w		fsqrt_sd_may_unfl
-	bgt.b		fsqrt_sd_unfl		# yes; go handle underflow
-	cmpi.l		%d0,&0x3fff-0x43ff	# will move in overflow?
-	beq.w		fsqrt_sd_may_ovfl	# maybe; go check
-	blt.w		fsqrt_sd_ovfl		# yes; go handle overflow
-	bra.w		fsqrt_sd_normal		# no; ho handle normalized op
-
-# we're on the line here and the distinguising characteristic is whether
-# the exponent is 3fff or 3ffe. if it's 3ffe, then it's a safe number
-# elsewise fall through to underflow.
-fsqrt_sd_may_unfl:
-	btst		&0x0,1+FP_SCR0_EX(%a6)	# is exponent 0x3fff?
-	bne.w		fsqrt_sd_normal		# yes, so no underflow
-
-#
-# operand WILL underflow when moved in to the fp register file
-#
-fsqrt_sd_unfl:
-	bset		&unfl_bit,FPSR_EXCEPT(%a6) # set unfl exc bit
-
-	fmov.l		&rz_mode*0x10,%fpcr	# set FPCR
-	fmov.l		&0x0,%fpsr		# clear FPSR
-
-	fsqrt.x		FP_SCR0(%a6),%fp0	# execute square root
-
-	fmov.l		%fpsr,%d1		# save status
-	fmov.l		&0x0,%fpcr		# clear FPCR
-
-	or.l		%d1,USER_FPSR(%a6)	# save INEX2,N
-
-# if underflow or inexact is enabled, go calculate EXOP first.
-	mov.b		FPCR_ENABLE(%a6),%d1
-	andi.b		&0x0b,%d1		# is UNFL or INEX enabled?
-	bne.b		fsqrt_sd_unfl_ena	# yes
-
-fsqrt_sd_unfl_dis:
-	fmovm.x		&0x80,FP_SCR0(%a6)	# store out result
-
-	lea		FP_SCR0(%a6),%a0	# pass: result addr
-	mov.l		L_SCR3(%a6),%d1		# pass: rnd prec,mode
-	bsr.l		unf_res			# calculate default result
-	or.b		%d0,FPSR_CC(%a6)	# set possible 'Z' ccode
-	fmovm.x		FP_SCR0(%a6),&0x80	# return default result in fp0
-	rts
-
-#
-# operand will underflow AND underflow is enabled.
-# Therefore, we must return the result rounded to extended precision.
-#
-fsqrt_sd_unfl_ena:
-	mov.l		FP_SCR0_HI(%a6),FP_SCR1_HI(%a6)
-	mov.l		FP_SCR0_LO(%a6),FP_SCR1_LO(%a6)
-	mov.w		FP_SCR0_EX(%a6),%d1	# load current exponent
-
-	mov.l		%d2,-(%sp)		# save d2
-	mov.l		%d1,%d2			# make a copy
-	andi.l		&0x7fff,%d1		# strip sign
-	andi.w		&0x8000,%d2		# keep old sign
-	sub.l		%d0,%d1			# subtract scale factor
-	addi.l		&0x6000,%d1		# add new bias
-	andi.w		&0x7fff,%d1
-	or.w		%d2,%d1			# concat new sign,new exp
-	mov.w		%d1,FP_SCR1_EX(%a6)	# insert new exp
-	fmovm.x		FP_SCR1(%a6),&0x40	# return EXOP in fp1
-	mov.l		(%sp)+,%d2		# restore d2
-	bra.b		fsqrt_sd_unfl_dis
-
-#
-# operand WILL overflow.
-#
-fsqrt_sd_ovfl:
-	fmov.l		&0x0,%fpsr		# clear FPSR
-	fmov.l		L_SCR3(%a6),%fpcr	# set FPCR
-
-	fsqrt.x		FP_SCR0(%a6),%fp0	# perform square root
-
-	fmov.l		&0x0,%fpcr		# clear FPCR
-	fmov.l		%fpsr,%d1		# save FPSR
-
-	or.l		%d1,USER_FPSR(%a6)	# save INEX2,N
-
-fsqrt_sd_ovfl_tst:
-	or.l		&ovfl_inx_mask,USER_FPSR(%a6) # set ovfl/aovfl/ainex
-
-	mov.b		FPCR_ENABLE(%a6),%d1
-	andi.b		&0x13,%d1		# is OVFL or INEX enabled?
-	bne.b		fsqrt_sd_ovfl_ena	# yes
-
-#
-# OVFL is not enabled; therefore, we must create the default result by
-# calling ovf_res().
-#
-fsqrt_sd_ovfl_dis:
-	btst		&neg_bit,FPSR_CC(%a6)	# is result negative?
-	sne		%d1			# set sign param accordingly
-	mov.l		L_SCR3(%a6),%d0		# pass: prec,mode
-	bsr.l		ovf_res			# calculate default result
-	or.b		%d0,FPSR_CC(%a6)	# set INF,N if applicable
-	fmovm.x		(%a0),&0x80		# return default result in fp0
-	rts
-
-#
-# OVFL is enabled.
-# the INEX2 bit has already been updated by the round to the correct precision.
-# now, round to extended(and don't alter the FPSR).
-#
-fsqrt_sd_ovfl_ena:
-	mov.l		%d2,-(%sp)		# save d2
-	mov.w		FP_SCR0_EX(%a6),%d1	# fetch {sgn,exp}
-	mov.l		%d1,%d2			# make a copy
-	andi.l		&0x7fff,%d1		# strip sign
-	andi.w		&0x8000,%d2		# keep old sign
-	sub.l		%d0,%d1			# add scale factor
-	subi.l		&0x6000,%d1		# subtract bias
-	andi.w		&0x7fff,%d1
-	or.w		%d2,%d1			# concat sign,exp
-	mov.w		%d1,FP_SCR0_EX(%a6)	# insert new exponent
-	fmovm.x		FP_SCR0(%a6),&0x40	# return EXOP in fp1
-	mov.l		(%sp)+,%d2		# restore d2
-	bra.b		fsqrt_sd_ovfl_dis
-
-#
-# the move in MAY underflow. so...
-#
-fsqrt_sd_may_ovfl:
-	btst		&0x0,1+FP_SCR0_EX(%a6)	# is exponent 0x3fff?
-	bne.w		fsqrt_sd_ovfl		# yes, so overflow
-
-	fmov.l		&0x0,%fpsr		# clear FPSR
-	fmov.l		L_SCR3(%a6),%fpcr	# set FPCR
-
-	fsqrt.x		FP_SCR0(%a6),%fp0	# perform absolute
-
-	fmov.l		%fpsr,%d1		# save status
-	fmov.l		&0x0,%fpcr		# clear FPCR
-
-	or.l		%d1,USER_FPSR(%a6)	# save INEX2,N
-
-	fmov.x		%fp0,%fp1		# make a copy of result
-	fcmp.b		%fp1,&0x1		# is |result| >= 1.b?
-	fbge.w		fsqrt_sd_ovfl_tst	# yes; overflow has occurred
-
-# no, it didn't overflow; we have correct result
-	bra.w		fsqrt_sd_normal_exit
-
-##########################################################################
-
-#
-# input is not normalized; what is it?
-#
-fsqrt_not_norm:
-	cmpi.b		%d1,&DENORM		# weed out DENORM
-	beq.w		fsqrt_denorm
-	cmpi.b		%d1,&ZERO		# weed out ZERO
-	beq.b		fsqrt_zero
-	cmpi.b		%d1,&INF		# weed out INF
-	beq.b		fsqrt_inf
-	cmpi.b		%d1,&SNAN		# weed out SNAN
-	beq.l		res_snan_1op
-	bra.l		res_qnan_1op
-
-#
-#	fsqrt(+0) = +0
-#	fsqrt(-0) = -0
-#	fsqrt(+INF) = +INF
-#	fsqrt(-INF) = OPERR
-#
-fsqrt_zero:
-	tst.b		SRC_EX(%a0)		# is ZERO positive or negative?
-	bmi.b		fsqrt_zero_m		# negative
-fsqrt_zero_p:
-	fmov.s		&0x00000000,%fp0	# return +ZERO
-	mov.b		&z_bmask,FPSR_CC(%a6)	# set 'Z' ccode bit
-	rts
-fsqrt_zero_m:
-	fmov.s		&0x80000000,%fp0	# return -ZERO
-	mov.b		&z_bmask+neg_bmask,FPSR_CC(%a6)	# set 'Z','N' ccode bits
-	rts
-
-fsqrt_inf:
-	tst.b		SRC_EX(%a0)		# is INF positive or negative?
-	bmi.l		res_operr		# negative
-fsqrt_inf_p:
-	fmovm.x		SRC(%a0),&0x80		# return +INF in fp0
-	mov.b		&inf_bmask,FPSR_CC(%a6)	# set 'I' ccode bit
-	rts
-
-##########################################################################
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	addsub_scaler2(): scale inputs to fadd/fsub such that no	#
-#			  OVFL/UNFL exceptions will result		#
-#									#
-# XREF ****************************************************************	#
-#	norm() - normalize mantissa after adjusting exponent		#
-#									#
-# INPUT ***************************************************************	#
-#	FP_SRC(a6) = fp op1(src)					#
-#	FP_DST(a6) = fp op2(dst)					#
-#									#
-# OUTPUT **************************************************************	#
-#	FP_SRC(a6) = fp op1 scaled(src)					#
-#	FP_DST(a6) = fp op2 scaled(dst)					#
-#	d0         = scale amount					#
-#									#
-# ALGORITHM ***********************************************************	#
-#	If the DST exponent is > the SRC exponent, set the DST exponent	#
-# equal to 0x3fff and scale the SRC exponent by the value that the	#
-# DST exponent was scaled by. If the SRC exponent is greater or equal,	#
-# do the opposite. Return this scale factor in d0.			#
-#	If the two exponents differ by > the number of mantissa bits	#
-# plus two, then set the smallest exponent to a very small value as a	#
-# quick shortcut.							#
-#									#
-#########################################################################
-
-	global		addsub_scaler2
-addsub_scaler2:
-	mov.l		SRC_HI(%a0),FP_SCR0_HI(%a6)
-	mov.l		DST_HI(%a1),FP_SCR1_HI(%a6)
-	mov.l		SRC_LO(%a0),FP_SCR0_LO(%a6)
-	mov.l		DST_LO(%a1),FP_SCR1_LO(%a6)
-	mov.w		SRC_EX(%a0),%d0
-	mov.w		DST_EX(%a1),%d1
-	mov.w		%d0,FP_SCR0_EX(%a6)
-	mov.w		%d1,FP_SCR1_EX(%a6)
-
-	andi.w		&0x7fff,%d0
-	andi.w		&0x7fff,%d1
-	mov.w		%d0,L_SCR1(%a6)		# store src exponent
-	mov.w		%d1,2+L_SCR1(%a6)	# store dst exponent
-
-	cmp.w		%d0, %d1		# is src exp >= dst exp?
-	bge.l		src_exp_ge2
-
-# dst exp is >  src exp; scale dst to exp = 0x3fff
-dst_exp_gt2:
-	bsr.l		scale_to_zero_dst
-	mov.l		%d0,-(%sp)		# save scale factor
-
-	cmpi.b		STAG(%a6),&DENORM	# is dst denormalized?
-	bne.b		cmpexp12
-
-	lea		FP_SCR0(%a6),%a0
-	bsr.l		norm			# normalize the denorm; result is new exp
-	neg.w		%d0			# new exp = -(shft val)
-	mov.w		%d0,L_SCR1(%a6)		# inset new exp
-
-cmpexp12:
-	mov.w		2+L_SCR1(%a6),%d0
-	subi.w		&mantissalen+2,%d0	# subtract mantissalen+2 from larger exp
-
-	cmp.w		%d0,L_SCR1(%a6)		# is difference >= len(mantissa)+2?
-	bge.b		quick_scale12
-
-	mov.w		L_SCR1(%a6),%d0
-	add.w		0x2(%sp),%d0		# scale src exponent by scale factor
-	mov.w		FP_SCR0_EX(%a6),%d1
-	and.w		&0x8000,%d1
-	or.w		%d1,%d0			# concat {sgn,new exp}
-	mov.w		%d0,FP_SCR0_EX(%a6)	# insert new dst exponent
-
-	mov.l		(%sp)+,%d0		# return SCALE factor
-	rts
-
-quick_scale12:
-	andi.w		&0x8000,FP_SCR0_EX(%a6)	# zero src exponent
-	bset		&0x0,1+FP_SCR0_EX(%a6)	# set exp = 1
-
-	mov.l		(%sp)+,%d0		# return SCALE factor
-	rts
-
-# src exp is >= dst exp; scale src to exp = 0x3fff
-src_exp_ge2:
-	bsr.l		scale_to_zero_src
-	mov.l		%d0,-(%sp)		# save scale factor
-
-	cmpi.b		DTAG(%a6),&DENORM	# is dst denormalized?
-	bne.b		cmpexp22
-	lea		FP_SCR1(%a6),%a0
-	bsr.l		norm			# normalize the denorm; result is new exp
-	neg.w		%d0			# new exp = -(shft val)
-	mov.w		%d0,2+L_SCR1(%a6)	# inset new exp
-
-cmpexp22:
-	mov.w		L_SCR1(%a6),%d0
-	subi.w		&mantissalen+2,%d0	# subtract mantissalen+2 from larger exp
-
-	cmp.w		%d0,2+L_SCR1(%a6)	# is difference >= len(mantissa)+2?
-	bge.b		quick_scale22
-
-	mov.w		2+L_SCR1(%a6),%d0
-	add.w		0x2(%sp),%d0		# scale dst exponent by scale factor
-	mov.w		FP_SCR1_EX(%a6),%d1
-	andi.w		&0x8000,%d1
-	or.w		%d1,%d0			# concat {sgn,new exp}
-	mov.w		%d0,FP_SCR1_EX(%a6)	# insert new dst exponent
-
-	mov.l		(%sp)+,%d0		# return SCALE factor
-	rts
-
-quick_scale22:
-	andi.w		&0x8000,FP_SCR1_EX(%a6)	# zero dst exponent
-	bset		&0x0,1+FP_SCR1_EX(%a6)	# set exp = 1
-
-	mov.l		(%sp)+,%d0		# return SCALE factor
-	rts
-
-##########################################################################
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	scale_to_zero_src(): scale the exponent of extended precision	#
-#			     value at FP_SCR0(a6).			#
-#									#
-# XREF ****************************************************************	#
-#	norm() - normalize the mantissa if the operand was a DENORM	#
-#									#
-# INPUT ***************************************************************	#
-#	FP_SCR0(a6) = extended precision operand to be scaled		#
-#									#
-# OUTPUT **************************************************************	#
-#	FP_SCR0(a6) = scaled extended precision operand			#
-#	d0	    = scale value					#
-#									#
-# ALGORITHM ***********************************************************	#
-#	Set the exponent of the input operand to 0x3fff. Save the value	#
-# of the difference between the original and new exponent. Then,	#
-# normalize the operand if it was a DENORM. Add this normalization	#
-# value to the previous value. Return the result.			#
-#									#
-#########################################################################
-
-	global		scale_to_zero_src
-scale_to_zero_src:
-	mov.w		FP_SCR0_EX(%a6),%d1	# extract operand's {sgn,exp}
-	mov.w		%d1,%d0			# make a copy
-
-	andi.l		&0x7fff,%d1		# extract operand's exponent
-
-	andi.w		&0x8000,%d0		# extract operand's sgn
-	or.w		&0x3fff,%d0		# insert new operand's exponent(=0)
-
-	mov.w		%d0,FP_SCR0_EX(%a6)	# insert biased exponent
-
-	cmpi.b		STAG(%a6),&DENORM	# is operand normalized?
-	beq.b		stzs_denorm		# normalize the DENORM
-
-stzs_norm:
-	mov.l		&0x3fff,%d0
-	sub.l		%d1,%d0			# scale = BIAS + (-exp)
-
-	rts
-
-stzs_denorm:
-	lea		FP_SCR0(%a6),%a0	# pass ptr to src op
-	bsr.l		norm			# normalize denorm
-	neg.l		%d0			# new exponent = -(shft val)
-	mov.l		%d0,%d1			# prepare for op_norm call
-	bra.b		stzs_norm		# finish scaling
-
-###
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	scale_sqrt(): scale the input operand exponent so a subsequent	#
-#		      fsqrt operation won't take an exception.		#
-#									#
-# XREF ****************************************************************	#
-#	norm() - normalize the mantissa if the operand was a DENORM	#
-#									#
-# INPUT ***************************************************************	#
-#	FP_SCR0(a6) = extended precision operand to be scaled		#
-#									#
-# OUTPUT **************************************************************	#
-#	FP_SCR0(a6) = scaled extended precision operand			#
-#	d0	    = scale value					#
-#									#
-# ALGORITHM ***********************************************************	#
-#	If the input operand is a DENORM, normalize it.			#
-#	If the exponent of the input operand is even, set the exponent	#
-# to 0x3ffe and return a scale factor of "(exp-0x3ffe)/2". If the	#
-# exponent of the input operand is off, set the exponent to ox3fff and	#
-# return a scale factor of "(exp-0x3fff)/2".				#
-#									#
-#########################################################################
-
-	global		scale_sqrt
-scale_sqrt:
-	cmpi.b		STAG(%a6),&DENORM	# is operand normalized?
-	beq.b		ss_denorm		# normalize the DENORM
-
-	mov.w		FP_SCR0_EX(%a6),%d1	# extract operand's {sgn,exp}
-	andi.l		&0x7fff,%d1		# extract operand's exponent
-
-	andi.w		&0x8000,FP_SCR0_EX(%a6)	# extract operand's sgn
-
-	btst		&0x0,%d1		# is exp even or odd?
-	beq.b		ss_norm_even
-
-	ori.w		&0x3fff,FP_SCR0_EX(%a6)	# insert new operand's exponent(=0)
-
-	mov.l		&0x3fff,%d0
-	sub.l		%d1,%d0			# scale = BIAS + (-exp)
-	asr.l		&0x1,%d0		# divide scale factor by 2
-	rts
-
-ss_norm_even:
-	ori.w		&0x3ffe,FP_SCR0_EX(%a6)	# insert new operand's exponent(=0)
-
-	mov.l		&0x3ffe,%d0
-	sub.l		%d1,%d0			# scale = BIAS + (-exp)
-	asr.l		&0x1,%d0		# divide scale factor by 2
-	rts
-
-ss_denorm:
-	lea		FP_SCR0(%a6),%a0	# pass ptr to src op
-	bsr.l		norm			# normalize denorm
-
-	btst		&0x0,%d0		# is exp even or odd?
-	beq.b		ss_denorm_even
-
-	ori.w		&0x3fff,FP_SCR0_EX(%a6)	# insert new operand's exponent(=0)
-
-	add.l		&0x3fff,%d0
-	asr.l		&0x1,%d0		# divide scale factor by 2
-	rts
-
-ss_denorm_even:
-	ori.w		&0x3ffe,FP_SCR0_EX(%a6)	# insert new operand's exponent(=0)
-
-	add.l		&0x3ffe,%d0
-	asr.l		&0x1,%d0		# divide scale factor by 2
-	rts
-
-###
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	scale_to_zero_dst(): scale the exponent of extended precision	#
-#			     value at FP_SCR1(a6).			#
-#									#
-# XREF ****************************************************************	#
-#	norm() - normalize the mantissa if the operand was a DENORM	#
-#									#
-# INPUT ***************************************************************	#
-#	FP_SCR1(a6) = extended precision operand to be scaled		#
-#									#
-# OUTPUT **************************************************************	#
-#	FP_SCR1(a6) = scaled extended precision operand			#
-#	d0	    = scale value					#
-#									#
-# ALGORITHM ***********************************************************	#
-#	Set the exponent of the input operand to 0x3fff. Save the value	#
-# of the difference between the original and new exponent. Then,	#
-# normalize the operand if it was a DENORM. Add this normalization	#
-# value to the previous value. Return the result.			#
-#									#
-#########################################################################
-
-	global		scale_to_zero_dst
-scale_to_zero_dst:
-	mov.w		FP_SCR1_EX(%a6),%d1	# extract operand's {sgn,exp}
-	mov.w		%d1,%d0			# make a copy
-
-	andi.l		&0x7fff,%d1		# extract operand's exponent
-
-	andi.w		&0x8000,%d0		# extract operand's sgn
-	or.w		&0x3fff,%d0		# insert new operand's exponent(=0)
-
-	mov.w		%d0,FP_SCR1_EX(%a6)	# insert biased exponent
-
-	cmpi.b		DTAG(%a6),&DENORM	# is operand normalized?
-	beq.b		stzd_denorm		# normalize the DENORM
-
-stzd_norm:
-	mov.l		&0x3fff,%d0
-	sub.l		%d1,%d0			# scale = BIAS + (-exp)
-	rts
-
-stzd_denorm:
-	lea		FP_SCR1(%a6),%a0	# pass ptr to dst op
-	bsr.l		norm			# normalize denorm
-	neg.l		%d0			# new exponent = -(shft val)
-	mov.l		%d0,%d1			# prepare for op_norm call
-	bra.b		stzd_norm		# finish scaling
-
-##########################################################################
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	res_qnan(): return default result w/ QNAN operand for dyadic	#
-#	res_snan(): return default result w/ SNAN operand for dyadic	#
-#	res_qnan_1op(): return dflt result w/ QNAN operand for monadic	#
-#	res_snan_1op(): return dflt result w/ SNAN operand for monadic	#
-#									#
-# XREF ****************************************************************	#
-#	None								#
-#									#
-# INPUT ***************************************************************	#
-#	FP_SRC(a6) = pointer to extended precision src operand		#
-#	FP_DST(a6) = pointer to extended precision dst operand		#
-#									#
-# OUTPUT **************************************************************	#
-#	fp0 = default result						#
-#									#
-# ALGORITHM ***********************************************************	#
-#	If either operand (but not both operands) of an operation is a	#
-# nonsignalling NAN, then that NAN is returned as the result. If both	#
-# operands are nonsignalling NANs, then the destination operand		#
-# nonsignalling NAN is returned as the result.				#
-#	If either operand to an operation is a signalling NAN (SNAN),	#
-# then, the SNAN bit is set in the FPSR EXC byte. If the SNAN trap	#
-# enable bit is set in the FPCR, then the trap is taken and the		#
-# destination is not modified. If the SNAN trap enable bit is not set,	#
-# then the SNAN is converted to a nonsignalling NAN (by setting the	#
-# SNAN bit in the operand to one), and the operation continues as	#
-# described in the preceding paragraph, for nonsignalling NANs.		#
-#	Make sure the appropriate FPSR bits are set before exiting.	#
-#									#
-#########################################################################
-
-	global		res_qnan
-	global		res_snan
-res_qnan:
-res_snan:
-	cmp.b		DTAG(%a6), &SNAN	# is the dst an SNAN?
-	beq.b		dst_snan2
-	cmp.b		DTAG(%a6), &QNAN	# is the dst a  QNAN?
-	beq.b		dst_qnan2
-src_nan:
-	cmp.b		STAG(%a6), &QNAN
-	beq.b		src_qnan2
-	global		res_snan_1op
-res_snan_1op:
-src_snan2:
-	bset		&0x6, FP_SRC_HI(%a6)	# set SNAN bit
-	or.l		&nan_mask+aiop_mask+snan_mask, USER_FPSR(%a6)
-	lea		FP_SRC(%a6), %a0
-	bra.b		nan_comp
-	global		res_qnan_1op
-res_qnan_1op:
-src_qnan2:
-	or.l		&nan_mask, USER_FPSR(%a6)
-	lea		FP_SRC(%a6), %a0
-	bra.b		nan_comp
-dst_snan2:
-	or.l		&nan_mask+aiop_mask+snan_mask, USER_FPSR(%a6)
-	bset		&0x6, FP_DST_HI(%a6)	# set SNAN bit
-	lea		FP_DST(%a6), %a0
-	bra.b		nan_comp
-dst_qnan2:
-	lea		FP_DST(%a6), %a0
-	cmp.b		STAG(%a6), &SNAN
-	bne		nan_done
-	or.l		&aiop_mask+snan_mask, USER_FPSR(%a6)
-nan_done:
-	or.l		&nan_mask, USER_FPSR(%a6)
-nan_comp:
-	btst		&0x7, FTEMP_EX(%a0)	# is NAN neg?
-	beq.b		nan_not_neg
-	or.l		&neg_mask, USER_FPSR(%a6)
-nan_not_neg:
-	fmovm.x		(%a0), &0x80
-	rts
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	res_operr(): return default result during operand error		#
-#									#
-# XREF ****************************************************************	#
-#	None								#
-#									#
-# INPUT ***************************************************************	#
-#	None								#
-#									#
-# OUTPUT **************************************************************	#
-#	fp0 = default operand error result				#
-#									#
-# ALGORITHM ***********************************************************	#
-#	An nonsignalling NAN is returned as the default result when	#
-# an operand error occurs for the following cases:			#
-#									#
-#	Multiply: (Infinity x Zero)					#
-#	Divide  : (Zero / Zero) || (Infinity / Infinity)		#
-#									#
-#########################################################################
-
-	global		res_operr
-res_operr:
-	or.l		&nan_mask+operr_mask+aiop_mask, USER_FPSR(%a6)
-	fmovm.x		nan_return(%pc), &0x80
-	rts
-
-nan_return:
-	long		0x7fff0000, 0xffffffff, 0xffffffff
-
-#########################################################################
-# fdbcc(): routine to emulate the fdbcc instruction			#
-#									#
-# XDEF **************************************************************** #
-#	_fdbcc()							#
-#									#
-# XREF **************************************************************** #
-#	fetch_dreg() - fetch Dn value					#
-#	store_dreg_l() - store updated Dn value				#
-#									#
-# INPUT ***************************************************************	#
-#	d0 = displacement						#
-#									#
-# OUTPUT ************************************************************** #
-#	none								#
-#									#
-# ALGORITHM ***********************************************************	#
-#	This routine checks which conditional predicate is specified by	#
-# the stacked fdbcc instruction opcode and then branches to a routine	#
-# for that predicate. The corresponding fbcc instruction is then used	#
-# to see whether the condition (specified by the stacked FPSR) is true	#
-# or false.								#
-#	If a BSUN exception should be indicated, the BSUN and ABSUN	#
-# bits are set in the stacked FPSR. If the BSUN exception is enabled,	#
-# the fbsun_flg is set in the SPCOND_FLG location on the stack. If an	#
-# enabled BSUN should not be flagged and the predicate is true, then	#
-# Dn is fetched and decremented by one. If Dn is not equal to -1, add	#
-# the displacement value to the stacked PC so that when an "rte" is	#
-# finally executed, the branch occurs.					#
-#									#
-#########################################################################
-	global		_fdbcc
-_fdbcc:
-	mov.l		%d0,L_SCR1(%a6)		# save displacement
-
-	mov.w		EXC_CMDREG(%a6),%d0	# fetch predicate
-
-	clr.l		%d1			# clear scratch reg
-	mov.b		FPSR_CC(%a6),%d1	# fetch fp ccodes
-	ror.l		&0x8,%d1		# rotate to top byte
-	fmov.l		%d1,%fpsr		# insert into FPSR
-
-	mov.w		(tbl_fdbcc.b,%pc,%d0.w*2),%d1 # load table
-	jmp		(tbl_fdbcc.b,%pc,%d1.w) # jump to fdbcc routine
-
-tbl_fdbcc:
-	short		fdbcc_f		-	tbl_fdbcc	# 00
-	short		fdbcc_eq	-	tbl_fdbcc	# 01
-	short		fdbcc_ogt	-	tbl_fdbcc	# 02
-	short		fdbcc_oge	-	tbl_fdbcc	# 03
-	short		fdbcc_olt	-	tbl_fdbcc	# 04
-	short		fdbcc_ole	-	tbl_fdbcc	# 05
-	short		fdbcc_ogl	-	tbl_fdbcc	# 06
-	short		fdbcc_or	-	tbl_fdbcc	# 07
-	short		fdbcc_un	-	tbl_fdbcc	# 08
-	short		fdbcc_ueq	-	tbl_fdbcc	# 09
-	short		fdbcc_ugt	-	tbl_fdbcc	# 10
-	short		fdbcc_uge	-	tbl_fdbcc	# 11
-	short		fdbcc_ult	-	tbl_fdbcc	# 12
-	short		fdbcc_ule	-	tbl_fdbcc	# 13
-	short		fdbcc_neq	-	tbl_fdbcc	# 14
-	short		fdbcc_t		-	tbl_fdbcc	# 15
-	short		fdbcc_sf	-	tbl_fdbcc	# 16
-	short		fdbcc_seq	-	tbl_fdbcc	# 17
-	short		fdbcc_gt	-	tbl_fdbcc	# 18
-	short		fdbcc_ge	-	tbl_fdbcc	# 19
-	short		fdbcc_lt	-	tbl_fdbcc	# 20
-	short		fdbcc_le	-	tbl_fdbcc	# 21
-	short		fdbcc_gl	-	tbl_fdbcc	# 22
-	short		fdbcc_gle	-	tbl_fdbcc	# 23
-	short		fdbcc_ngle	-	tbl_fdbcc	# 24
-	short		fdbcc_ngl	-	tbl_fdbcc	# 25
-	short		fdbcc_nle	-	tbl_fdbcc	# 26
-	short		fdbcc_nlt	-	tbl_fdbcc	# 27
-	short		fdbcc_nge	-	tbl_fdbcc	# 28
-	short		fdbcc_ngt	-	tbl_fdbcc	# 29
-	short		fdbcc_sneq	-	tbl_fdbcc	# 30
-	short		fdbcc_st	-	tbl_fdbcc	# 31
-
-#########################################################################
-#									#
-# IEEE Nonaware tests							#
-#									#
-# For the IEEE nonaware tests, only the false branch changes the	#
-# counter. However, the true branch may set bsun so we check to see	#
-# if the NAN bit is set, in which case BSUN and AIOP will be set.	#
-#									#
-# The cases EQ and NE are shared by the Aware and Nonaware groups	#
-# and are incapable of setting the BSUN exception bit.			#
-#									#
-# Typically, only one of the two possible branch directions could	#
-# have the NAN bit set.							#
-# (This is assuming the mutual exclusiveness of FPSR cc bit groupings	#
-#  is preserved.)							#
-#									#
-#########################################################################
-
-#
-# equal:
-#
-#	Z
-#
-fdbcc_eq:
-	fbeq.w		fdbcc_eq_yes		# equal?
-fdbcc_eq_no:
-	bra.w		fdbcc_false		# no; go handle counter
-fdbcc_eq_yes:
-	rts
-
-#
-# not equal:
-#	_
-#	Z
-#
-fdbcc_neq:
-	fbneq.w		fdbcc_neq_yes		# not equal?
-fdbcc_neq_no:
-	bra.w		fdbcc_false		# no; go handle counter
-fdbcc_neq_yes:
-	rts
-
-#
-# greater than:
-#	_______
-#	NANvZvN
-#
-fdbcc_gt:
-	fbgt.w		fdbcc_gt_yes		# greater than?
-	btst		&nan_bit, FPSR_CC(%a6)	# is NAN set in cc?
-	beq.w		fdbcc_false		# no;go handle counter
-	ori.l		&bsun_mask+aiop_mask, USER_FPSR(%a6) # set BSUN exc bit
-	btst		&bsun_bit, FPCR_ENABLE(%a6) # is BSUN enabled?
-	bne.w		fdbcc_bsun		# yes; we have an exception
-	bra.w		fdbcc_false		# no; go handle counter
-fdbcc_gt_yes:
-	rts					# do nothing
-
-#
-# not greater than:
-#
-#	NANvZvN
-#
-fdbcc_ngt:
-	fbngt.w		fdbcc_ngt_yes		# not greater than?
-fdbcc_ngt_no:
-	bra.w		fdbcc_false		# no; go handle counter
-fdbcc_ngt_yes:
-	btst		&nan_bit, FPSR_CC(%a6)	# is NAN set in cc?
-	beq.b		fdbcc_ngt_done		# no;go finish
-	ori.l		&bsun_mask+aiop_mask, USER_FPSR(%a6) # set BSUN exc bit
-	btst		&bsun_bit, FPCR_ENABLE(%a6) # is BSUN enabled?
-	bne.w		fdbcc_bsun		# yes; we have an exception
-fdbcc_ngt_done:
-	rts					# no; do nothing
-
-#
-# greater than or equal:
-#	   _____
-#	Zv(NANvN)
-#
-fdbcc_ge:
-	fbge.w		fdbcc_ge_yes		# greater than or equal?
-fdbcc_ge_no:
-	btst		&nan_bit, FPSR_CC(%a6)	# is NAN set in cc?
-	beq.w		fdbcc_false		# no;go handle counter
-	ori.l		&bsun_mask+aiop_mask, USER_FPSR(%a6) # set BSUN exc bit
-	btst		&bsun_bit, FPCR_ENABLE(%a6) # is BSUN enabled?
-	bne.w		fdbcc_bsun		# yes; we have an exception
-	bra.w		fdbcc_false		# no; go handle counter
-fdbcc_ge_yes:
-	btst		&nan_bit, FPSR_CC(%a6)	# is NAN set in cc?
-	beq.b		fdbcc_ge_yes_done	# no;go do nothing
-	ori.l		&bsun_mask+aiop_mask, USER_FPSR(%a6) # set BSUN exc bit
-	btst		&bsun_bit, FPCR_ENABLE(%a6) # is BSUN enabled?
-	bne.w		fdbcc_bsun		# yes; we have an exception
-fdbcc_ge_yes_done:
-	rts					# do nothing
-
-#
-# not (greater than or equal):
-#	       _
-#	NANv(N^Z)
-#
-fdbcc_nge:
-	fbnge.w		fdbcc_nge_yes		# not (greater than or equal)?
-fdbcc_nge_no:
-	bra.w		fdbcc_false		# no; go handle counter
-fdbcc_nge_yes:
-	btst		&nan_bit, FPSR_CC(%a6)	# is NAN set in cc?
-	beq.b		fdbcc_nge_done		# no;go finish
-	ori.l		&bsun_mask+aiop_mask, USER_FPSR(%a6) # set BSUN exc bit
-	btst		&bsun_bit, FPCR_ENABLE(%a6) # is BSUN enabled?
-	bne.w		fdbcc_bsun		# yes; we have an exception
-fdbcc_nge_done:
-	rts					# no; do nothing
-
-#
-# less than:
-#	   _____
-#	N^(NANvZ)
-#
-fdbcc_lt:
-	fblt.w		fdbcc_lt_yes		# less than?
-fdbcc_lt_no:
-	btst		&nan_bit, FPSR_CC(%a6)	# is NAN set in cc?
-	beq.w		fdbcc_false		# no; go handle counter
-	ori.l		&bsun_mask+aiop_mask, USER_FPSR(%a6) # set BSUN exc bit
-	btst		&bsun_bit, FPCR_ENABLE(%a6) # is BSUN enabled?
-	bne.w		fdbcc_bsun		# yes; we have an exception
-	bra.w		fdbcc_false		# no; go handle counter
-fdbcc_lt_yes:
-	rts					# do nothing
-
-#
-# not less than:
-#	       _
-#	NANv(ZvN)
-#
-fdbcc_nlt:
-	fbnlt.w		fdbcc_nlt_yes		# not less than?
-fdbcc_nlt_no:
-	bra.w		fdbcc_false		# no; go handle counter
-fdbcc_nlt_yes:
-	btst		&nan_bit, FPSR_CC(%a6)	# is NAN set in cc?
-	beq.b		fdbcc_nlt_done		# no;go finish
-	ori.l		&bsun_mask+aiop_mask, USER_FPSR(%a6) # set BSUN exc bit
-	btst		&bsun_bit, FPCR_ENABLE(%a6) # is BSUN enabled?
-	bne.w		fdbcc_bsun		# yes; we have an exception
-fdbcc_nlt_done:
-	rts					# no; do nothing
-
-#
-# less than or equal:
-#	     ___
-#	Zv(N^NAN)
-#
-fdbcc_le:
-	fble.w		fdbcc_le_yes		# less than or equal?
-fdbcc_le_no:
-	btst		&nan_bit, FPSR_CC(%a6)	# is NAN set in cc?
-	beq.w		fdbcc_false		# no; go handle counter
-	ori.l		&bsun_mask+aiop_mask, USER_FPSR(%a6) # set BSUN exc bit
-	btst		&bsun_bit, FPCR_ENABLE(%a6) # is BSUN enabled?
-	bne.w		fdbcc_bsun		# yes; we have an exception
-	bra.w		fdbcc_false		# no; go handle counter
-fdbcc_le_yes:
-	btst		&nan_bit, FPSR_CC(%a6)	# is NAN set in cc?
-	beq.b		fdbcc_le_yes_done	# no; go do nothing
-	ori.l		&bsun_mask+aiop_mask, USER_FPSR(%a6) # set BSUN exc bit
-	btst		&bsun_bit, FPCR_ENABLE(%a6) # is BSUN enabled?
-	bne.w		fdbcc_bsun		# yes; we have an exception
-fdbcc_le_yes_done:
-	rts					# do nothing
-
-#
-# not (less than or equal):
-#	     ___
-#	NANv(NvZ)
-#
-fdbcc_nle:
-	fbnle.w		fdbcc_nle_yes		# not (less than or equal)?
-fdbcc_nle_no:
-	bra.w		fdbcc_false		# no; go handle counter
-fdbcc_nle_yes:
-	btst		&nan_bit, FPSR_CC(%a6)	# is NAN set in cc?
-	beq.w		fdbcc_nle_done		# no; go finish
-	ori.l		&bsun_mask+aiop_mask, USER_FPSR(%a6) # set BSUN exc bit
-	btst		&bsun_bit, FPCR_ENABLE(%a6) # is BSUN enabled?
-	bne.w		fdbcc_bsun		# yes; we have an exception
-fdbcc_nle_done:
-	rts					# no; do nothing
-
-#
-# greater or less than:
-#	_____
-#	NANvZ
-#
-fdbcc_gl:
-	fbgl.w		fdbcc_gl_yes		# greater or less than?
-fdbcc_gl_no:
-	btst		&nan_bit, FPSR_CC(%a6)	# is NAN set in cc?
-	beq.w		fdbcc_false		# no; handle counter
-	ori.l		&bsun_mask+aiop_mask, USER_FPSR(%a6) # set BSUN exc bit
-	btst		&bsun_bit, FPCR_ENABLE(%a6) # is BSUN enabled?
-	bne.w		fdbcc_bsun		# yes; we have an exception
-	bra.w		fdbcc_false		# no; go handle counter
-fdbcc_gl_yes:
-	rts					# do nothing
-
-#
-# not (greater or less than):
-#
-#	NANvZ
-#
-fdbcc_ngl:
-	fbngl.w		fdbcc_ngl_yes		# not (greater or less than)?
-fdbcc_ngl_no:
-	bra.w		fdbcc_false		# no; go handle counter
-fdbcc_ngl_yes:
-	btst		&nan_bit, FPSR_CC(%a6)	# is NAN set in cc?
-	beq.b		fdbcc_ngl_done		# no; go finish
-	ori.l		&bsun_mask+aiop_mask, USER_FPSR(%a6) # set BSUN exc bit
-	btst		&bsun_bit, FPCR_ENABLE(%a6) # is BSUN enabled?
-	bne.w		fdbcc_bsun		# yes; we have an exception
-fdbcc_ngl_done:
-	rts					# no; do nothing
-
-#
-# greater, less, or equal:
-#	___
-#	NAN
-#
-fdbcc_gle:
-	fbgle.w		fdbcc_gle_yes		# greater, less, or equal?
-fdbcc_gle_no:
-	ori.l		&bsun_mask+aiop_mask, USER_FPSR(%a6) # set BSUN exc bit
-	btst		&bsun_bit, FPCR_ENABLE(%a6) # is BSUN enabled?
-	bne.w		fdbcc_bsun		# yes; we have an exception
-	bra.w		fdbcc_false		# no; go handle counter
-fdbcc_gle_yes:
-	rts					# do nothing
-
-#
-# not (greater, less, or equal):
-#
-#	NAN
-#
-fdbcc_ngle:
-	fbngle.w	fdbcc_ngle_yes		# not (greater, less, or equal)?
-fdbcc_ngle_no:
-	bra.w		fdbcc_false		# no; go handle counter
-fdbcc_ngle_yes:
-	ori.l		&bsun_mask+aiop_mask, USER_FPSR(%a6) # set BSUN exc bit
-	btst		&bsun_bit, FPCR_ENABLE(%a6) # is BSUN enabled?
-	bne.w		fdbcc_bsun		# yes; we have an exception
-	rts					# no; do nothing
-
-#########################################################################
-#									#
-# Miscellaneous tests							#
-#									#
-# For the IEEE miscellaneous tests, all but fdbf and fdbt can set bsun. #
-#									#
-#########################################################################
-
-#
-# false:
-#
-#	False
-#
-fdbcc_f:					# no bsun possible
-	bra.w		fdbcc_false		# go handle counter
-
-#
-# true:
-#
-#	True
-#
-fdbcc_t:					# no bsun possible
-	rts					# do nothing
-
-#
-# signalling false:
-#
-#	False
-#
-fdbcc_sf:
-	btst		&nan_bit, FPSR_CC(%a6)	# is NAN set?
-	beq.w		fdbcc_false		# no;go handle counter
-	ori.l		&bsun_mask+aiop_mask, USER_FPSR(%a6) # set BSUN exc bit
-	btst		&bsun_bit, FPCR_ENABLE(%a6) # is BSUN enabled?
-	bne.w		fdbcc_bsun		# yes; we have an exception
-	bra.w		fdbcc_false		# go handle counter
-
-#
-# signalling true:
-#
-#	True
-#
-fdbcc_st:
-	btst		&nan_bit, FPSR_CC(%a6)	# is NAN set?
-	beq.b		fdbcc_st_done		# no;go finish
-	ori.l		&bsun_mask+aiop_mask, USER_FPSR(%a6) # set BSUN exc bit
-	btst		&bsun_bit, FPCR_ENABLE(%a6) # is BSUN enabled?
-	bne.w		fdbcc_bsun		# yes; we have an exception
-fdbcc_st_done:
-	rts
-
-#
-# signalling equal:
-#
-#	Z
-#
-fdbcc_seq:
-	fbseq.w		fdbcc_seq_yes		# signalling equal?
-fdbcc_seq_no:
-	btst		&nan_bit, FPSR_CC(%a6)	# is NAN set?
-	beq.w		fdbcc_false		# no;go handle counter
-	ori.l		&bsun_mask+aiop_mask, USER_FPSR(%a6) # set BSUN exc bit
-	btst		&bsun_bit, FPCR_ENABLE(%a6) # is BSUN enabled?
-	bne.w		fdbcc_bsun		# yes; we have an exception
-	bra.w		fdbcc_false		# go handle counter
-fdbcc_seq_yes:
-	btst		&nan_bit, FPSR_CC(%a6)	# is NAN set?
-	beq.b		fdbcc_seq_yes_done	# no;go do nothing
-	ori.l		&bsun_mask+aiop_mask, USER_FPSR(%a6) # set BSUN exc bit
-	btst		&bsun_bit, FPCR_ENABLE(%a6) # is BSUN enabled?
-	bne.w		fdbcc_bsun		# yes; we have an exception
-fdbcc_seq_yes_done:
-	rts					# yes; do nothing
-
-#
-# signalling not equal:
-#	_
-#	Z
-#
-fdbcc_sneq:
-	fbsneq.w	fdbcc_sneq_yes		# signalling not equal?
-fdbcc_sneq_no:
-	btst		&nan_bit, FPSR_CC(%a6)	# is NAN set?
-	beq.w		fdbcc_false		# no;go handle counter
-	ori.l		&bsun_mask+aiop_mask, USER_FPSR(%a6) # set BSUN exc bit
-	btst		&bsun_bit, FPCR_ENABLE(%a6) # is BSUN enabled?
-	bne.w		fdbcc_bsun		# yes; we have an exception
-	bra.w		fdbcc_false		# go handle counter
-fdbcc_sneq_yes:
-	btst		&nan_bit, FPSR_CC(%a6)	# set BSUN exc bit
-	beq.w		fdbcc_sneq_done		# no;go finish
-	ori.l		&bsun_mask+aiop_mask, USER_FPSR(%a6) # set BSUN exc bit
-	btst		&bsun_bit, FPCR_ENABLE(%a6) # is BSUN enabled?
-	bne.w		fdbcc_bsun		# yes; we have an exception
-fdbcc_sneq_done:
-	rts
-
-#########################################################################
-#									#
-# IEEE Aware tests							#
-#									#
-# For the IEEE aware tests, action is only taken if the result is false.#
-# Therefore, the opposite branch type is used to jump to the decrement	#
-# routine.								#
-# The BSUN exception will not be set for any of these tests.		#
-#									#
-#########################################################################
-
-#
-# ordered greater than:
-#	_______
-#	NANvZvN
-#
-fdbcc_ogt:
-	fbogt.w		fdbcc_ogt_yes		# ordered greater than?
-fdbcc_ogt_no:
-	bra.w		fdbcc_false		# no; go handle counter
-fdbcc_ogt_yes:
-	rts					# yes; do nothing
-
-#
-# unordered or less or equal:
-#	_______
-#	NANvZvN
-#
-fdbcc_ule:
-	fbule.w		fdbcc_ule_yes		# unordered or less or equal?
-fdbcc_ule_no:
-	bra.w		fdbcc_false		# no; go handle counter
-fdbcc_ule_yes:
-	rts					# yes; do nothing
-
-#
-# ordered greater than or equal:
-#	   _____
-#	Zv(NANvN)
-#
-fdbcc_oge:
-	fboge.w		fdbcc_oge_yes		# ordered greater than or equal?
-fdbcc_oge_no:
-	bra.w		fdbcc_false		# no; go handle counter
-fdbcc_oge_yes:
-	rts					# yes; do nothing
-
-#
-# unordered or less than:
-#	       _
-#	NANv(N^Z)
-#
-fdbcc_ult:
-	fbult.w		fdbcc_ult_yes		# unordered or less than?
-fdbcc_ult_no:
-	bra.w		fdbcc_false		# no; go handle counter
-fdbcc_ult_yes:
-	rts					# yes; do nothing
-
-#
-# ordered less than:
-#	   _____
-#	N^(NANvZ)
-#
-fdbcc_olt:
-	fbolt.w		fdbcc_olt_yes		# ordered less than?
-fdbcc_olt_no:
-	bra.w		fdbcc_false		# no; go handle counter
-fdbcc_olt_yes:
-	rts					# yes; do nothing
-
-#
-# unordered or greater or equal:
-#
-#	NANvZvN
-#
-fdbcc_uge:
-	fbuge.w		fdbcc_uge_yes		# unordered or greater than?
-fdbcc_uge_no:
-	bra.w		fdbcc_false		# no; go handle counter
-fdbcc_uge_yes:
-	rts					# yes; do nothing
-
-#
-# ordered less than or equal:
-#	     ___
-#	Zv(N^NAN)
-#
-fdbcc_ole:
-	fbole.w		fdbcc_ole_yes		# ordered greater or less than?
-fdbcc_ole_no:
-	bra.w		fdbcc_false		# no; go handle counter
-fdbcc_ole_yes:
-	rts					# yes; do nothing
-
-#
-# unordered or greater than:
-#	     ___
-#	NANv(NvZ)
-#
-fdbcc_ugt:
-	fbugt.w		fdbcc_ugt_yes		# unordered or greater than?
-fdbcc_ugt_no:
-	bra.w		fdbcc_false		# no; go handle counter
-fdbcc_ugt_yes:
-	rts					# yes; do nothing
-
-#
-# ordered greater or less than:
-#	_____
-#	NANvZ
-#
-fdbcc_ogl:
-	fbogl.w		fdbcc_ogl_yes		# ordered greater or less than?
-fdbcc_ogl_no:
-	bra.w		fdbcc_false		# no; go handle counter
-fdbcc_ogl_yes:
-	rts					# yes; do nothing
-
-#
-# unordered or equal:
-#
-#	NANvZ
-#
-fdbcc_ueq:
-	fbueq.w		fdbcc_ueq_yes		# unordered or equal?
-fdbcc_ueq_no:
-	bra.w		fdbcc_false		# no; go handle counter
-fdbcc_ueq_yes:
-	rts					# yes; do nothing
-
-#
-# ordered:
-#	___
-#	NAN
-#
-fdbcc_or:
-	fbor.w		fdbcc_or_yes		# ordered?
-fdbcc_or_no:
-	bra.w		fdbcc_false		# no; go handle counter
-fdbcc_or_yes:
-	rts					# yes; do nothing
-
-#
-# unordered:
-#
-#	NAN
-#
-fdbcc_un:
-	fbun.w		fdbcc_un_yes		# unordered?
-fdbcc_un_no:
-	bra.w		fdbcc_false		# no; go handle counter
-fdbcc_un_yes:
-	rts					# yes; do nothing
-
-#######################################################################
-
-#
-# the bsun exception bit was not set.
-#
-# (1) subtract 1 from the count register
-# (2) if (cr == -1) then
-#	pc = pc of next instruction
-#     else
-#	pc += sign_ext(16-bit displacement)
-#
-fdbcc_false:
-	mov.b		1+EXC_OPWORD(%a6), %d1	# fetch lo opword
-	andi.w		&0x7, %d1		# extract count register
-
-	bsr.l		fetch_dreg		# fetch count value
-# make sure that d0 isn't corrupted between calls...
-
-	subq.w		&0x1, %d0		# Dn - 1 -> Dn
-
-	bsr.l		store_dreg_l		# store new count value
-
-	cmpi.w		%d0, &-0x1		# is (Dn == -1)?
-	bne.b		fdbcc_false_cont	# no;
-	rts
-
-fdbcc_false_cont:
-	mov.l		L_SCR1(%a6),%d0		# fetch displacement
-	add.l		USER_FPIAR(%a6),%d0	# add instruction PC
-	addq.l		&0x4,%d0		# add instruction length
-	mov.l		%d0,EXC_PC(%a6)		# set new PC
-	rts
-
-# the emulation routine set bsun and BSUN was enabled. have to
-# fix stack and jump to the bsun handler.
-# let the caller of this routine shift the stack frame up to
-# eliminate the effective address field.
-fdbcc_bsun:
-	mov.b		&fbsun_flg,SPCOND_FLG(%a6)
-	rts
-
-#########################################################################
-# ftrapcc(): routine to emulate the ftrapcc instruction			#
-#									#
-# XDEF ****************************************************************	#
-#	_ftrapcc()							#
-#									#
-# XREF ****************************************************************	#
-#	none								#
-#									#
-# INPUT *************************************************************** #
-#	none								#
-#									#
-# OUTPUT ************************************************************** #
-#	none								#
-#									#
-# ALGORITHM *********************************************************** #
-#	This routine checks which conditional predicate is specified by	#
-# the stacked ftrapcc instruction opcode and then branches to a routine	#
-# for that predicate. The corresponding fbcc instruction is then used	#
-# to see whether the condition (specified by the stacked FPSR) is true	#
-# or false.								#
-#	If a BSUN exception should be indicated, the BSUN and ABSUN	#
-# bits are set in the stacked FPSR. If the BSUN exception is enabled,	#
-# the fbsun_flg is set in the SPCOND_FLG location on the stack. If an	#
-# enabled BSUN should not be flagged and the predicate is true, then	#
-# the ftrapcc_flg is set in the SPCOND_FLG location. These special	#
-# flags indicate to the calling routine to emulate the exceptional	#
-# condition.								#
-#									#
-#########################################################################
-
-	global		_ftrapcc
-_ftrapcc:
-	mov.w		EXC_CMDREG(%a6),%d0	# fetch predicate
-
-	clr.l		%d1			# clear scratch reg
-	mov.b		FPSR_CC(%a6),%d1	# fetch fp ccodes
-	ror.l		&0x8,%d1		# rotate to top byte
-	fmov.l		%d1,%fpsr		# insert into FPSR
-
-	mov.w		(tbl_ftrapcc.b,%pc,%d0.w*2), %d1 # load table
-	jmp		(tbl_ftrapcc.b,%pc,%d1.w) # jump to ftrapcc routine
-
-tbl_ftrapcc:
-	short		ftrapcc_f	-	tbl_ftrapcc	# 00
-	short		ftrapcc_eq	-	tbl_ftrapcc	# 01
-	short		ftrapcc_ogt	-	tbl_ftrapcc	# 02
-	short		ftrapcc_oge	-	tbl_ftrapcc	# 03
-	short		ftrapcc_olt	-	tbl_ftrapcc	# 04
-	short		ftrapcc_ole	-	tbl_ftrapcc	# 05
-	short		ftrapcc_ogl	-	tbl_ftrapcc	# 06
-	short		ftrapcc_or	-	tbl_ftrapcc	# 07
-	short		ftrapcc_un	-	tbl_ftrapcc	# 08
-	short		ftrapcc_ueq	-	tbl_ftrapcc	# 09
-	short		ftrapcc_ugt	-	tbl_ftrapcc	# 10
-	short		ftrapcc_uge	-	tbl_ftrapcc	# 11
-	short		ftrapcc_ult	-	tbl_ftrapcc	# 12
-	short		ftrapcc_ule	-	tbl_ftrapcc	# 13
-	short		ftrapcc_neq	-	tbl_ftrapcc	# 14
-	short		ftrapcc_t	-	tbl_ftrapcc	# 15
-	short		ftrapcc_sf	-	tbl_ftrapcc	# 16
-	short		ftrapcc_seq	-	tbl_ftrapcc	# 17
-	short		ftrapcc_gt	-	tbl_ftrapcc	# 18
-	short		ftrapcc_ge	-	tbl_ftrapcc	# 19
-	short		ftrapcc_lt	-	tbl_ftrapcc	# 20
-	short		ftrapcc_le	-	tbl_ftrapcc	# 21
-	short		ftrapcc_gl	-	tbl_ftrapcc	# 22
-	short		ftrapcc_gle	-	tbl_ftrapcc	# 23
-	short		ftrapcc_ngle	-	tbl_ftrapcc	# 24
-	short		ftrapcc_ngl	-	tbl_ftrapcc	# 25
-	short		ftrapcc_nle	-	tbl_ftrapcc	# 26
-	short		ftrapcc_nlt	-	tbl_ftrapcc	# 27
-	short		ftrapcc_nge	-	tbl_ftrapcc	# 28
-	short		ftrapcc_ngt	-	tbl_ftrapcc	# 29
-	short		ftrapcc_sneq	-	tbl_ftrapcc	# 30
-	short		ftrapcc_st	-	tbl_ftrapcc	# 31
-
-#########################################################################
-#									#
-# IEEE Nonaware tests							#
-#									#
-# For the IEEE nonaware tests, we set the result based on the		#
-# floating point condition codes. In addition, we check to see		#
-# if the NAN bit is set, in which case BSUN and AIOP will be set.	#
-#									#
-# The cases EQ and NE are shared by the Aware and Nonaware groups	#
-# and are incapable of setting the BSUN exception bit.			#
-#									#
-# Typically, only one of the two possible branch directions could	#
-# have the NAN bit set.							#
-#									#
-#########################################################################
-
-#
-# equal:
-#
-#	Z
-#
-ftrapcc_eq:
-	fbeq.w		ftrapcc_trap		# equal?
-ftrapcc_eq_no:
-	rts					# do nothing
-
-#
-# not equal:
-#	_
-#	Z
-#
-ftrapcc_neq:
-	fbneq.w		ftrapcc_trap		# not equal?
-ftrapcc_neq_no:
-	rts					# do nothing
-
-#
-# greater than:
-#	_______
-#	NANvZvN
-#
-ftrapcc_gt:
-	fbgt.w		ftrapcc_trap		# greater than?
-ftrapcc_gt_no:
-	btst		&nan_bit, FPSR_CC(%a6)	# is NAN set in cc?
-	beq.b		ftrapcc_gt_done		# no
-	ori.l		&bsun_mask+aiop_mask, USER_FPSR(%a6) # set BSUN exc bit
-	btst		&bsun_bit, FPCR_ENABLE(%a6) # was BSUN set?
-	bne.w		ftrapcc_bsun		# yes
-ftrapcc_gt_done:
-	rts					# no; do nothing
-
-#
-# not greater than:
-#
-#	NANvZvN
-#
-ftrapcc_ngt:
-	fbngt.w		ftrapcc_ngt_yes		# not greater than?
-ftrapcc_ngt_no:
-	rts					# do nothing
-ftrapcc_ngt_yes:
-	btst		&nan_bit, FPSR_CC(%a6)	# is NAN set in cc?
-	beq.w		ftrapcc_trap		# no; go take trap
-	ori.l		&bsun_mask+aiop_mask, USER_FPSR(%a6) # set BSUN exc bit
-	btst		&bsun_bit, FPCR_ENABLE(%a6) # was BSUN set?
-	bne.w		ftrapcc_bsun		# yes
-	bra.w		ftrapcc_trap		# no; go take trap
-
-#
-# greater than or equal:
-#	   _____
-#	Zv(NANvN)
-#
-ftrapcc_ge:
-	fbge.w		ftrapcc_ge_yes		# greater than or equal?
-ftrapcc_ge_no:
-	btst		&nan_bit, FPSR_CC(%a6)	# is NAN set in cc?
-	beq.b		ftrapcc_ge_done		# no; go finish
-	ori.l		&bsun_mask+aiop_mask, USER_FPSR(%a6) # set BSUN exc bit
-	btst		&bsun_bit, FPCR_ENABLE(%a6) # was BSUN set?
-	bne.w		ftrapcc_bsun		# yes
-ftrapcc_ge_done:
-	rts					# no; do nothing
-ftrapcc_ge_yes:
-	btst		&nan_bit, FPSR_CC(%a6)	# is NAN set in cc?
-	beq.w		ftrapcc_trap		# no; go take trap
-	ori.l		&bsun_mask+aiop_mask, USER_FPSR(%a6) # set BSUN exc bit
-	btst		&bsun_bit, FPCR_ENABLE(%a6) # was BSUN set?
-	bne.w		ftrapcc_bsun		# yes
-	bra.w		ftrapcc_trap		# no; go take trap
-
-#
-# not (greater than or equal):
-#	       _
-#	NANv(N^Z)
-#
-ftrapcc_nge:
-	fbnge.w		ftrapcc_nge_yes		# not (greater than or equal)?
-ftrapcc_nge_no:
-	rts					# do nothing
-ftrapcc_nge_yes:
-	btst		&nan_bit, FPSR_CC(%a6)	# is NAN set in cc?
-	beq.w		ftrapcc_trap		# no; go take trap
-	ori.l		&bsun_mask+aiop_mask, USER_FPSR(%a6) # set BSUN exc bit
-	btst		&bsun_bit, FPCR_ENABLE(%a6) # was BSUN set?
-	bne.w		ftrapcc_bsun		# yes
-	bra.w		ftrapcc_trap		# no; go take trap
-
-#
-# less than:
-#	   _____
-#	N^(NANvZ)
-#
-ftrapcc_lt:
-	fblt.w		ftrapcc_trap		# less than?
-ftrapcc_lt_no:
-	btst		&nan_bit, FPSR_CC(%a6)	# is NAN set in cc?
-	beq.b		ftrapcc_lt_done		# no; go finish
-	ori.l		&bsun_mask+aiop_mask, USER_FPSR(%a6) # set BSUN exc bit
-	btst		&bsun_bit, FPCR_ENABLE(%a6) # was BSUN set?
-	bne.w		ftrapcc_bsun		# yes
-ftrapcc_lt_done:
-	rts					# no; do nothing
-
-#
-# not less than:
-#	       _
-#	NANv(ZvN)
-#
-ftrapcc_nlt:
-	fbnlt.w		ftrapcc_nlt_yes		# not less than?
-ftrapcc_nlt_no:
-	rts					# do nothing
-ftrapcc_nlt_yes:
-	btst		&nan_bit, FPSR_CC(%a6)	# is NAN set in cc?
-	beq.w		ftrapcc_trap		# no; go take trap
-	ori.l		&bsun_mask+aiop_mask, USER_FPSR(%a6) # set BSUN exc bit
-	btst		&bsun_bit, FPCR_ENABLE(%a6) # was BSUN set?
-	bne.w		ftrapcc_bsun		# yes
-	bra.w		ftrapcc_trap		# no; go take trap
-
-#
-# less than or equal:
-#	     ___
-#	Zv(N^NAN)
-#
-ftrapcc_le:
-	fble.w		ftrapcc_le_yes		# less than or equal?
-ftrapcc_le_no:
-	btst		&nan_bit, FPSR_CC(%a6)	# is NAN set in cc?
-	beq.b		ftrapcc_le_done		# no; go finish
-	ori.l		&bsun_mask+aiop_mask, USER_FPSR(%a6) # set BSUN exc bit
-	btst		&bsun_bit, FPCR_ENABLE(%a6) # was BSUN set?
-	bne.w		ftrapcc_bsun		# yes
-ftrapcc_le_done:
-	rts					# no; do nothing
-ftrapcc_le_yes:
-	btst		&nan_bit, FPSR_CC(%a6)	# is NAN set in cc?
-	beq.w		ftrapcc_trap		# no; go take trap
-	ori.l		&bsun_mask+aiop_mask, USER_FPSR(%a6) # set BSUN exc bit
-	btst		&bsun_bit, FPCR_ENABLE(%a6) # was BSUN set?
-	bne.w		ftrapcc_bsun		# yes
-	bra.w		ftrapcc_trap		# no; go take trap
-
-#
-# not (less than or equal):
-#	     ___
-#	NANv(NvZ)
-#
-ftrapcc_nle:
-	fbnle.w		ftrapcc_nle_yes		# not (less than or equal)?
-ftrapcc_nle_no:
-	rts					# do nothing
-ftrapcc_nle_yes:
-	btst		&nan_bit, FPSR_CC(%a6)	# is NAN set in cc?
-	beq.w		ftrapcc_trap		# no; go take trap
-	ori.l		&bsun_mask+aiop_mask, USER_FPSR(%a6) # set BSUN exc bit
-	btst		&bsun_bit, FPCR_ENABLE(%a6) # was BSUN set?
-	bne.w		ftrapcc_bsun		# yes
-	bra.w		ftrapcc_trap		# no; go take trap
-
-#
-# greater or less than:
-#	_____
-#	NANvZ
-#
-ftrapcc_gl:
-	fbgl.w		ftrapcc_trap		# greater or less than?
-ftrapcc_gl_no:
-	btst		&nan_bit, FPSR_CC(%a6)	# is NAN set in cc?
-	beq.b		ftrapcc_gl_done		# no; go finish
-	ori.l		&bsun_mask+aiop_mask, USER_FPSR(%a6) # set BSUN exc bit
-	btst		&bsun_bit, FPCR_ENABLE(%a6) # was BSUN set?
-	bne.w		ftrapcc_bsun		# yes
-ftrapcc_gl_done:
-	rts					# no; do nothing
-
-#
-# not (greater or less than):
-#
-#	NANvZ
-#
-ftrapcc_ngl:
-	fbngl.w		ftrapcc_ngl_yes		# not (greater or less than)?
-ftrapcc_ngl_no:
-	rts					# do nothing
-ftrapcc_ngl_yes:
-	btst		&nan_bit, FPSR_CC(%a6)	# is NAN set in cc?
-	beq.w		ftrapcc_trap		# no; go take trap
-	ori.l		&bsun_mask+aiop_mask, USER_FPSR(%a6) # set BSUN exc bit
-	btst		&bsun_bit, FPCR_ENABLE(%a6) # was BSUN set?
-	bne.w		ftrapcc_bsun		# yes
-	bra.w		ftrapcc_trap		# no; go take trap
-
-#
-# greater, less, or equal:
-#	___
-#	NAN
-#
-ftrapcc_gle:
-	fbgle.w		ftrapcc_trap		# greater, less, or equal?
-ftrapcc_gle_no:
-	ori.l		&bsun_mask+aiop_mask, USER_FPSR(%a6) # set BSUN exc bit
-	btst		&bsun_bit, FPCR_ENABLE(%a6) # was BSUN set?
-	bne.w		ftrapcc_bsun		# yes
-	rts					# no; do nothing
-
-#
-# not (greater, less, or equal):
-#
-#	NAN
-#
-ftrapcc_ngle:
-	fbngle.w	ftrapcc_ngle_yes	# not (greater, less, or equal)?
-ftrapcc_ngle_no:
-	rts					# do nothing
-ftrapcc_ngle_yes:
-	ori.l		&bsun_mask+aiop_mask, USER_FPSR(%a6) # set BSUN exc bit
-	btst		&bsun_bit, FPCR_ENABLE(%a6) # was BSUN set?
-	bne.w		ftrapcc_bsun		# yes
-	bra.w		ftrapcc_trap		# no; go take trap
-
-#########################################################################
-#									#
-# Miscellaneous tests							#
-#									#
-# For the IEEE aware tests, we only have to set the result based on the	#
-# floating point condition codes. The BSUN exception will not be	#
-# set for any of these tests.						#
-#									#
-#########################################################################
-
-#
-# false:
-#
-#	False
-#
-ftrapcc_f:
-	rts					# do nothing
-
-#
-# true:
-#
-#	True
-#
-ftrapcc_t:
-	bra.w		ftrapcc_trap		# go take trap
-
-#
-# signalling false:
-#
-#	False
-#
-ftrapcc_sf:
-	btst		&nan_bit, FPSR_CC(%a6)	# set BSUN exc bit
-	beq.b		ftrapcc_sf_done		# no; go finish
-	ori.l		&bsun_mask+aiop_mask, USER_FPSR(%a6) # set BSUN exc bit
-	btst		&bsun_bit, FPCR_ENABLE(%a6) # was BSUN set?
-	bne.w		ftrapcc_bsun		# yes
-ftrapcc_sf_done:
-	rts					# no; do nothing
-
-#
-# signalling true:
-#
-#	True
-#
-ftrapcc_st:
-	btst		&nan_bit, FPSR_CC(%a6)	# set BSUN exc bit
-	beq.w		ftrapcc_trap		# no; go take trap
-	ori.l		&bsun_mask+aiop_mask, USER_FPSR(%a6) # set BSUN exc bit
-	btst		&bsun_bit, FPCR_ENABLE(%a6) # was BSUN set?
-	bne.w		ftrapcc_bsun		# yes
-	bra.w		ftrapcc_trap		# no; go take trap
-
-#
-# signalling equal:
-#
-#	Z
-#
-ftrapcc_seq:
-	fbseq.w		ftrapcc_seq_yes		# signalling equal?
-ftrapcc_seq_no:
-	btst		&nan_bit, FPSR_CC(%a6)	# set BSUN exc bit
-	beq.w		ftrapcc_seq_done	# no; go finish
-	ori.l		&bsun_mask+aiop_mask, USER_FPSR(%a6) # set BSUN exc bit
-	btst		&bsun_bit, FPCR_ENABLE(%a6) # was BSUN set?
-	bne.w		ftrapcc_bsun		# yes
-ftrapcc_seq_done:
-	rts					# no; do nothing
-ftrapcc_seq_yes:
-	btst		&nan_bit, FPSR_CC(%a6)	# set BSUN exc bit
-	beq.w		ftrapcc_trap		# no; go take trap
-	ori.l		&bsun_mask+aiop_mask, USER_FPSR(%a6) # set BSUN exc bit
-	btst		&bsun_bit, FPCR_ENABLE(%a6) # was BSUN set?
-	bne.w		ftrapcc_bsun		# yes
-	bra.w		ftrapcc_trap		# no; go take trap
-
-#
-# signalling not equal:
-#	_
-#	Z
-#
-ftrapcc_sneq:
-	fbsneq.w	ftrapcc_sneq_yes	# signalling equal?
-ftrapcc_sneq_no:
-	btst		&nan_bit, FPSR_CC(%a6)	# set BSUN exc bit
-	beq.w		ftrapcc_sneq_no_done	# no; go finish
-	ori.l		&bsun_mask+aiop_mask, USER_FPSR(%a6) # set BSUN exc bit
-	btst		&bsun_bit, FPCR_ENABLE(%a6) # was BSUN set?
-	bne.w		ftrapcc_bsun		# yes
-ftrapcc_sneq_no_done:
-	rts					# do nothing
-ftrapcc_sneq_yes:
-	btst		&nan_bit, FPSR_CC(%a6)	# set BSUN exc bit
-	beq.w		ftrapcc_trap		# no; go take trap
-	ori.l		&bsun_mask+aiop_mask, USER_FPSR(%a6) # set BSUN exc bit
-	btst		&bsun_bit, FPCR_ENABLE(%a6) # was BSUN set?
-	bne.w		ftrapcc_bsun		# yes
-	bra.w		ftrapcc_trap		# no; go take trap
-
-#########################################################################
-#									#
-# IEEE Aware tests							#
-#									#
-# For the IEEE aware tests, we only have to set the result based on the	#
-# floating point condition codes. The BSUN exception will not be	#
-# set for any of these tests.						#
-#									#
-#########################################################################
-
-#
-# ordered greater than:
-#	_______
-#	NANvZvN
-#
-ftrapcc_ogt:
-	fbogt.w		ftrapcc_trap		# ordered greater than?
-ftrapcc_ogt_no:
-	rts					# do nothing
-
-#
-# unordered or less or equal:
-#	_______
-#	NANvZvN
-#
-ftrapcc_ule:
-	fbule.w		ftrapcc_trap		# unordered or less or equal?
-ftrapcc_ule_no:
-	rts					# do nothing
-
-#
-# ordered greater than or equal:
-#	   _____
-#	Zv(NANvN)
-#
-ftrapcc_oge:
-	fboge.w		ftrapcc_trap		# ordered greater than or equal?
-ftrapcc_oge_no:
-	rts					# do nothing
-
-#
-# unordered or less than:
-#	       _
-#	NANv(N^Z)
-#
-ftrapcc_ult:
-	fbult.w		ftrapcc_trap		# unordered or less than?
-ftrapcc_ult_no:
-	rts					# do nothing
-
-#
-# ordered less than:
-#	   _____
-#	N^(NANvZ)
-#
-ftrapcc_olt:
-	fbolt.w		ftrapcc_trap		# ordered less than?
-ftrapcc_olt_no:
-	rts					# do nothing
-
-#
-# unordered or greater or equal:
-#
-#	NANvZvN
-#
-ftrapcc_uge:
-	fbuge.w		ftrapcc_trap		# unordered or greater than?
-ftrapcc_uge_no:
-	rts					# do nothing
-
-#
-# ordered less than or equal:
-#	     ___
-#	Zv(N^NAN)
-#
-ftrapcc_ole:
-	fbole.w		ftrapcc_trap		# ordered greater or less than?
-ftrapcc_ole_no:
-	rts					# do nothing
-
-#
-# unordered or greater than:
-#	     ___
-#	NANv(NvZ)
-#
-ftrapcc_ugt:
-	fbugt.w		ftrapcc_trap		# unordered or greater than?
-ftrapcc_ugt_no:
-	rts					# do nothing
-
-#
-# ordered greater or less than:
-#	_____
-#	NANvZ
-#
-ftrapcc_ogl:
-	fbogl.w		ftrapcc_trap		# ordered greater or less than?
-ftrapcc_ogl_no:
-	rts					# do nothing
-
-#
-# unordered or equal:
-#
-#	NANvZ
-#
-ftrapcc_ueq:
-	fbueq.w		ftrapcc_trap		# unordered or equal?
-ftrapcc_ueq_no:
-	rts					# do nothing
-
-#
-# ordered:
-#	___
-#	NAN
-#
-ftrapcc_or:
-	fbor.w		ftrapcc_trap		# ordered?
-ftrapcc_or_no:
-	rts					# do nothing
-
-#
-# unordered:
-#
-#	NAN
-#
-ftrapcc_un:
-	fbun.w		ftrapcc_trap		# unordered?
-ftrapcc_un_no:
-	rts					# do nothing
-
-#######################################################################
-
-# the bsun exception bit was not set.
-# we will need to jump to the ftrapcc vector. the stack frame
-# is the same size as that of the fp unimp instruction. the
-# only difference is that the <ea> field should hold the PC
-# of the ftrapcc instruction and the vector offset field
-# should denote the ftrapcc trap.
-ftrapcc_trap:
-	mov.b		&ftrapcc_flg,SPCOND_FLG(%a6)
-	rts
-
-# the emulation routine set bsun and BSUN was enabled. have to
-# fix stack and jump to the bsun handler.
-# let the caller of this routine shift the stack frame up to
-# eliminate the effective address field.
-ftrapcc_bsun:
-	mov.b		&fbsun_flg,SPCOND_FLG(%a6)
-	rts
-
-#########################################################################
-# fscc(): routine to emulate the fscc instruction			#
-#									#
-# XDEF **************************************************************** #
-#	_fscc()								#
-#									#
-# XREF **************************************************************** #
-#	store_dreg_b() - store result to data register file		#
-#	dec_areg() - decrement an areg for -(an) mode			#
-#	inc_areg() - increment an areg for (an)+ mode			#
-#	_dmem_write_byte() - store result to memory			#
-#									#
-# INPUT ***************************************************************	#
-#	none								#
-#									#
-# OUTPUT ************************************************************** #
-#	none								#
-#									#
-# ALGORITHM ***********************************************************	#
-#	This routine checks which conditional predicate is specified by	#
-# the stacked fscc instruction opcode and then branches to a routine	#
-# for that predicate. The corresponding fbcc instruction is then used	#
-# to see whether the condition (specified by the stacked FPSR) is true	#
-# or false.								#
-#	If a BSUN exception should be indicated, the BSUN and ABSUN	#
-# bits are set in the stacked FPSR. If the BSUN exception is enabled,	#
-# the fbsun_flg is set in the SPCOND_FLG location on the stack. If an	#
-# enabled BSUN should not be flagged and the predicate is true, then	#
-# the result is stored to the data register file or memory		#
-#									#
-#########################################################################
-
-	global		_fscc
-_fscc:
-	mov.w		EXC_CMDREG(%a6),%d0	# fetch predicate
-
-	clr.l		%d1			# clear scratch reg
-	mov.b		FPSR_CC(%a6),%d1	# fetch fp ccodes
-	ror.l		&0x8,%d1		# rotate to top byte
-	fmov.l		%d1,%fpsr		# insert into FPSR
-
-	mov.w		(tbl_fscc.b,%pc,%d0.w*2),%d1 # load table
-	jmp		(tbl_fscc.b,%pc,%d1.w)	# jump to fscc routine
-
-tbl_fscc:
-	short		fscc_f		-	tbl_fscc	# 00
-	short		fscc_eq		-	tbl_fscc	# 01
-	short		fscc_ogt	-	tbl_fscc	# 02
-	short		fscc_oge	-	tbl_fscc	# 03
-	short		fscc_olt	-	tbl_fscc	# 04
-	short		fscc_ole	-	tbl_fscc	# 05
-	short		fscc_ogl	-	tbl_fscc	# 06
-	short		fscc_or		-	tbl_fscc	# 07
-	short		fscc_un		-	tbl_fscc	# 08
-	short		fscc_ueq	-	tbl_fscc	# 09
-	short		fscc_ugt	-	tbl_fscc	# 10
-	short		fscc_uge	-	tbl_fscc	# 11
-	short		fscc_ult	-	tbl_fscc	# 12
-	short		fscc_ule	-	tbl_fscc	# 13
-	short		fscc_neq	-	tbl_fscc	# 14
-	short		fscc_t		-	tbl_fscc	# 15
-	short		fscc_sf		-	tbl_fscc	# 16
-	short		fscc_seq	-	tbl_fscc	# 17
-	short		fscc_gt		-	tbl_fscc	# 18
-	short		fscc_ge		-	tbl_fscc	# 19
-	short		fscc_lt		-	tbl_fscc	# 20
-	short		fscc_le		-	tbl_fscc	# 21
-	short		fscc_gl		-	tbl_fscc	# 22
-	short		fscc_gle	-	tbl_fscc	# 23
-	short		fscc_ngle	-	tbl_fscc	# 24
-	short		fscc_ngl	-	tbl_fscc	# 25
-	short		fscc_nle	-	tbl_fscc	# 26
-	short		fscc_nlt	-	tbl_fscc	# 27
-	short		fscc_nge	-	tbl_fscc	# 28
-	short		fscc_ngt	-	tbl_fscc	# 29
-	short		fscc_sneq	-	tbl_fscc	# 30
-	short		fscc_st		-	tbl_fscc	# 31
-
-#########################################################################
-#									#
-# IEEE Nonaware tests							#
-#									#
-# For the IEEE nonaware tests, we set the result based on the		#
-# floating point condition codes. In addition, we check to see		#
-# if the NAN bit is set, in which case BSUN and AIOP will be set.	#
-#									#
-# The cases EQ and NE are shared by the Aware and Nonaware groups	#
-# and are incapable of setting the BSUN exception bit.			#
-#									#
-# Typically, only one of the two possible branch directions could	#
-# have the NAN bit set.							#
-#									#
-#########################################################################
-
-#
-# equal:
-#
-#	Z
-#
-fscc_eq:
-	fbeq.w		fscc_eq_yes		# equal?
-fscc_eq_no:
-	clr.b		%d0			# set false
-	bra.w		fscc_done		# go finish
-fscc_eq_yes:
-	st		%d0			# set true
-	bra.w		fscc_done		# go finish
-
-#
-# not equal:
-#	_
-#	Z
-#
-fscc_neq:
-	fbneq.w		fscc_neq_yes		# not equal?
-fscc_neq_no:
-	clr.b		%d0			# set false
-	bra.w		fscc_done		# go finish
-fscc_neq_yes:
-	st		%d0			# set true
-	bra.w		fscc_done		# go finish
-
-#
-# greater than:
-#	_______
-#	NANvZvN
-#
-fscc_gt:
-	fbgt.w		fscc_gt_yes		# greater than?
-fscc_gt_no:
-	clr.b		%d0			# set false
-	btst		&nan_bit, FPSR_CC(%a6)	# is NAN set in cc?
-	beq.w		fscc_done		# no;go finish
-	ori.l		&bsun_mask+aiop_mask, USER_FPSR(%a6) # set BSUN exc bit
-	bra.w		fscc_chk_bsun		# go finish
-fscc_gt_yes:
-	st		%d0			# set true
-	bra.w		fscc_done		# go finish
-
-#
-# not greater than:
-#
-#	NANvZvN
-#
-fscc_ngt:
-	fbngt.w		fscc_ngt_yes		# not greater than?
-fscc_ngt_no:
-	clr.b		%d0			# set false
-	bra.w		fscc_done		# go finish
-fscc_ngt_yes:
-	st		%d0			# set true
-	btst		&nan_bit, FPSR_CC(%a6)	# is NAN set in cc?
-	beq.w		fscc_done		# no;go finish
-	ori.l		&bsun_mask+aiop_mask, USER_FPSR(%a6) # set BSUN exc bit
-	bra.w		fscc_chk_bsun		# go finish
-
-#
-# greater than or equal:
-#	   _____
-#	Zv(NANvN)
-#
-fscc_ge:
-	fbge.w		fscc_ge_yes		# greater than or equal?
-fscc_ge_no:
-	clr.b		%d0			# set false
-	btst		&nan_bit, FPSR_CC(%a6)	# is NAN set in cc?
-	beq.w		fscc_done		# no;go finish
-	ori.l		&bsun_mask+aiop_mask, USER_FPSR(%a6) # set BSUN exc bit
-	bra.w		fscc_chk_bsun		# go finish
-fscc_ge_yes:
-	st		%d0			# set true
-	btst		&nan_bit, FPSR_CC(%a6)	# is NAN set in cc?
-	beq.w		fscc_done		# no;go finish
-	ori.l		&bsun_mask+aiop_mask, USER_FPSR(%a6) # set BSUN exc bit
-	bra.w		fscc_chk_bsun		# go finish
-
-#
-# not (greater than or equal):
-#	       _
-#	NANv(N^Z)
-#
-fscc_nge:
-	fbnge.w		fscc_nge_yes		# not (greater than or equal)?
-fscc_nge_no:
-	clr.b		%d0			# set false
-	bra.w		fscc_done		# go finish
-fscc_nge_yes:
-	st		%d0			# set true
-	btst		&nan_bit, FPSR_CC(%a6)	# is NAN set in cc?
-	beq.w		fscc_done		# no;go finish
-	ori.l		&bsun_mask+aiop_mask, USER_FPSR(%a6) # set BSUN exc bit
-	bra.w		fscc_chk_bsun		# go finish
-
-#
-# less than:
-#	   _____
-#	N^(NANvZ)
-#
-fscc_lt:
-	fblt.w		fscc_lt_yes		# less than?
-fscc_lt_no:
-	clr.b		%d0			# set false
-	btst		&nan_bit, FPSR_CC(%a6)	# is NAN set in cc?
-	beq.w		fscc_done		# no;go finish
-	ori.l		&bsun_mask+aiop_mask, USER_FPSR(%a6) # set BSUN exc bit
-	bra.w		fscc_chk_bsun		# go finish
-fscc_lt_yes:
-	st		%d0			# set true
-	bra.w		fscc_done		# go finish
-
-#
-# not less than:
-#	       _
-#	NANv(ZvN)
-#
-fscc_nlt:
-	fbnlt.w		fscc_nlt_yes		# not less than?
-fscc_nlt_no:
-	clr.b		%d0			# set false
-	bra.w		fscc_done		# go finish
-fscc_nlt_yes:
-	st		%d0			# set true
-	btst		&nan_bit, FPSR_CC(%a6)	# is NAN set in cc?
-	beq.w		fscc_done		# no;go finish
-	ori.l		&bsun_mask+aiop_mask, USER_FPSR(%a6) # set BSUN exc bit
-	bra.w		fscc_chk_bsun		# go finish
-
-#
-# less than or equal:
-#	     ___
-#	Zv(N^NAN)
-#
-fscc_le:
-	fble.w		fscc_le_yes		# less than or equal?
-fscc_le_no:
-	clr.b		%d0			# set false
-	btst		&nan_bit, FPSR_CC(%a6)	# is NAN set in cc?
-	beq.w		fscc_done		# no;go finish
-	ori.l		&bsun_mask+aiop_mask, USER_FPSR(%a6) # set BSUN exc bit
-	bra.w		fscc_chk_bsun		# go finish
-fscc_le_yes:
-	st		%d0			# set true
-	btst		&nan_bit, FPSR_CC(%a6)	# is NAN set in cc?
-	beq.w		fscc_done		# no;go finish
-	ori.l		&bsun_mask+aiop_mask, USER_FPSR(%a6) # set BSUN exc bit
-	bra.w		fscc_chk_bsun		# go finish
-
-#
-# not (less than or equal):
-#	     ___
-#	NANv(NvZ)
-#
-fscc_nle:
-	fbnle.w		fscc_nle_yes		# not (less than or equal)?
-fscc_nle_no:
-	clr.b		%d0			# set false
-	bra.w		fscc_done		# go finish
-fscc_nle_yes:
-	st		%d0			# set true
-	btst		&nan_bit, FPSR_CC(%a6)	# is NAN set in cc?
-	beq.w		fscc_done		# no;go finish
-	ori.l		&bsun_mask+aiop_mask, USER_FPSR(%a6) # set BSUN exc bit
-	bra.w		fscc_chk_bsun		# go finish
-
-#
-# greater or less than:
-#	_____
-#	NANvZ
-#
-fscc_gl:
-	fbgl.w		fscc_gl_yes		# greater or less than?
-fscc_gl_no:
-	clr.b		%d0			# set false
-	btst		&nan_bit, FPSR_CC(%a6)	# is NAN set in cc?
-	beq.w		fscc_done		# no;go finish
-	ori.l		&bsun_mask+aiop_mask, USER_FPSR(%a6) # set BSUN exc bit
-	bra.w		fscc_chk_bsun		# go finish
-fscc_gl_yes:
-	st		%d0			# set true
-	bra.w		fscc_done		# go finish
-
-#
-# not (greater or less than):
-#
-#	NANvZ
-#
-fscc_ngl:
-	fbngl.w		fscc_ngl_yes		# not (greater or less than)?
-fscc_ngl_no:
-	clr.b		%d0			# set false
-	bra.w		fscc_done		# go finish
-fscc_ngl_yes:
-	st		%d0			# set true
-	btst		&nan_bit, FPSR_CC(%a6)	# is NAN set in cc?
-	beq.w		fscc_done		# no;go finish
-	ori.l		&bsun_mask+aiop_mask, USER_FPSR(%a6) # set BSUN exc bit
-	bra.w		fscc_chk_bsun		# go finish
-
-#
-# greater, less, or equal:
-#	___
-#	NAN
-#
-fscc_gle:
-	fbgle.w		fscc_gle_yes		# greater, less, or equal?
-fscc_gle_no:
-	clr.b		%d0			# set false
-	ori.l		&bsun_mask+aiop_mask, USER_FPSR(%a6) # set BSUN exc bit
-	bra.w		fscc_chk_bsun		# go finish
-fscc_gle_yes:
-	st		%d0			# set true
-	bra.w		fscc_done		# go finish
-
-#
-# not (greater, less, or equal):
-#
-#	NAN
-#
-fscc_ngle:
-	fbngle.w		fscc_ngle_yes	# not (greater, less, or equal)?
-fscc_ngle_no:
-	clr.b		%d0			# set false
-	bra.w		fscc_done		# go finish
-fscc_ngle_yes:
-	st		%d0			# set true
-	ori.l		&bsun_mask+aiop_mask, USER_FPSR(%a6) # set BSUN exc bit
-	bra.w		fscc_chk_bsun		# go finish
-
-#########################################################################
-#									#
-# Miscellaneous tests							#
-#									#
-# For the IEEE aware tests, we only have to set the result based on the	#
-# floating point condition codes. The BSUN exception will not be	#
-# set for any of these tests.						#
-#									#
-#########################################################################
-
-#
-# false:
-#
-#	False
-#
-fscc_f:
-	clr.b		%d0			# set false
-	bra.w		fscc_done		# go finish
-
-#
-# true:
-#
-#	True
-#
-fscc_t:
-	st		%d0			# set true
-	bra.w		fscc_done		# go finish
-
-#
-# signalling false:
-#
-#	False
-#
-fscc_sf:
-	clr.b		%d0			# set false
-	btst		&nan_bit, FPSR_CC(%a6)	# set BSUN exc bit
-	beq.w		fscc_done		# no;go finish
-	ori.l		&bsun_mask+aiop_mask, USER_FPSR(%a6) # set BSUN exc bit
-	bra.w		fscc_chk_bsun		# go finish
-
-#
-# signalling true:
-#
-#	True
-#
-fscc_st:
-	st		%d0			# set false
-	btst		&nan_bit, FPSR_CC(%a6)	# set BSUN exc bit
-	beq.w		fscc_done		# no;go finish
-	ori.l		&bsun_mask+aiop_mask, USER_FPSR(%a6) # set BSUN exc bit
-	bra.w		fscc_chk_bsun		# go finish
-
-#
-# signalling equal:
-#
-#	Z
-#
-fscc_seq:
-	fbseq.w		fscc_seq_yes		# signalling equal?
-fscc_seq_no:
-	clr.b		%d0			# set false
-	btst		&nan_bit, FPSR_CC(%a6)	# set BSUN exc bit
-	beq.w		fscc_done		# no;go finish
-	ori.l		&bsun_mask+aiop_mask, USER_FPSR(%a6) # set BSUN exc bit
-	bra.w		fscc_chk_bsun		# go finish
-fscc_seq_yes:
-	st		%d0			# set true
-	btst		&nan_bit, FPSR_CC(%a6)	# set BSUN exc bit
-	beq.w		fscc_done		# no;go finish
-	ori.l		&bsun_mask+aiop_mask, USER_FPSR(%a6) # set BSUN exc bit
-	bra.w		fscc_chk_bsun		# go finish
-
-#
-# signalling not equal:
-#	_
-#	Z
-#
-fscc_sneq:
-	fbsneq.w	fscc_sneq_yes		# signalling equal?
-fscc_sneq_no:
-	clr.b		%d0			# set false
-	btst		&nan_bit, FPSR_CC(%a6)	# set BSUN exc bit
-	beq.w		fscc_done		# no;go finish
-	ori.l		&bsun_mask+aiop_mask, USER_FPSR(%a6) # set BSUN exc bit
-	bra.w		fscc_chk_bsun		# go finish
-fscc_sneq_yes:
-	st		%d0			# set true
-	btst		&nan_bit, FPSR_CC(%a6)	# set BSUN exc bit
-	beq.w		fscc_done		# no;go finish
-	ori.l		&bsun_mask+aiop_mask, USER_FPSR(%a6) # set BSUN exc bit
-	bra.w		fscc_chk_bsun		# go finish
-
-#########################################################################
-#									#
-# IEEE Aware tests							#
-#									#
-# For the IEEE aware tests, we only have to set the result based on the	#
-# floating point condition codes. The BSUN exception will not be	#
-# set for any of these tests.						#
-#									#
-#########################################################################
-
-#
-# ordered greater than:
-#	_______
-#	NANvZvN
-#
-fscc_ogt:
-	fbogt.w		fscc_ogt_yes		# ordered greater than?
-fscc_ogt_no:
-	clr.b		%d0			# set false
-	bra.w		fscc_done		# go finish
-fscc_ogt_yes:
-	st		%d0			# set true
-	bra.w		fscc_done		# go finish
-
-#
-# unordered or less or equal:
-#	_______
-#	NANvZvN
-#
-fscc_ule:
-	fbule.w		fscc_ule_yes		# unordered or less or equal?
-fscc_ule_no:
-	clr.b		%d0			# set false
-	bra.w		fscc_done		# go finish
-fscc_ule_yes:
-	st		%d0			# set true
-	bra.w		fscc_done		# go finish
-
-#
-# ordered greater than or equal:
-#	   _____
-#	Zv(NANvN)
-#
-fscc_oge:
-	fboge.w		fscc_oge_yes		# ordered greater than or equal?
-fscc_oge_no:
-	clr.b		%d0			# set false
-	bra.w		fscc_done		# go finish
-fscc_oge_yes:
-	st		%d0			# set true
-	bra.w		fscc_done		# go finish
-
-#
-# unordered or less than:
-#	       _
-#	NANv(N^Z)
-#
-fscc_ult:
-	fbult.w		fscc_ult_yes		# unordered or less than?
-fscc_ult_no:
-	clr.b		%d0			# set false
-	bra.w		fscc_done		# go finish
-fscc_ult_yes:
-	st		%d0			# set true
-	bra.w		fscc_done		# go finish
-
-#
-# ordered less than:
-#	   _____
-#	N^(NANvZ)
-#
-fscc_olt:
-	fbolt.w		fscc_olt_yes		# ordered less than?
-fscc_olt_no:
-	clr.b		%d0			# set false
-	bra.w		fscc_done		# go finish
-fscc_olt_yes:
-	st		%d0			# set true
-	bra.w		fscc_done		# go finish
-
-#
-# unordered or greater or equal:
-#
-#	NANvZvN
-#
-fscc_uge:
-	fbuge.w		fscc_uge_yes		# unordered or greater than?
-fscc_uge_no:
-	clr.b		%d0			# set false
-	bra.w		fscc_done		# go finish
-fscc_uge_yes:
-	st		%d0			# set true
-	bra.w		fscc_done		# go finish
-
-#
-# ordered less than or equal:
-#	     ___
-#	Zv(N^NAN)
-#
-fscc_ole:
-	fbole.w		fscc_ole_yes		# ordered greater or less than?
-fscc_ole_no:
-	clr.b		%d0			# set false
-	bra.w		fscc_done		# go finish
-fscc_ole_yes:
-	st		%d0			# set true
-	bra.w		fscc_done		# go finish
-
-#
-# unordered or greater than:
-#	     ___
-#	NANv(NvZ)
-#
-fscc_ugt:
-	fbugt.w		fscc_ugt_yes		# unordered or greater than?
-fscc_ugt_no:
-	clr.b		%d0			# set false
-	bra.w		fscc_done		# go finish
-fscc_ugt_yes:
-	st		%d0			# set true
-	bra.w		fscc_done		# go finish
-
-#
-# ordered greater or less than:
-#	_____
-#	NANvZ
-#
-fscc_ogl:
-	fbogl.w		fscc_ogl_yes		# ordered greater or less than?
-fscc_ogl_no:
-	clr.b		%d0			# set false
-	bra.w		fscc_done		# go finish
-fscc_ogl_yes:
-	st		%d0			# set true
-	bra.w		fscc_done		# go finish
-
-#
-# unordered or equal:
-#
-#	NANvZ
-#
-fscc_ueq:
-	fbueq.w		fscc_ueq_yes		# unordered or equal?
-fscc_ueq_no:
-	clr.b		%d0			# set false
-	bra.w		fscc_done		# go finish
-fscc_ueq_yes:
-	st		%d0			# set true
-	bra.w		fscc_done		# go finish
-
-#
-# ordered:
-#	___
-#	NAN
-#
-fscc_or:
-	fbor.w		fscc_or_yes		# ordered?
-fscc_or_no:
-	clr.b		%d0			# set false
-	bra.w		fscc_done		# go finish
-fscc_or_yes:
-	st		%d0			# set true
-	bra.w		fscc_done		# go finish
-
-#
-# unordered:
-#
-#	NAN
-#
-fscc_un:
-	fbun.w		fscc_un_yes		# unordered?
-fscc_un_no:
-	clr.b		%d0			# set false
-	bra.w		fscc_done		# go finish
-fscc_un_yes:
-	st		%d0			# set true
-	bra.w		fscc_done		# go finish
-
-#######################################################################
-
-#
-# the bsun exception bit was set. now, check to see is BSUN
-# is enabled. if so, don't store result and correct stack frame
-# for a bsun exception.
-#
-fscc_chk_bsun:
-	btst		&bsun_bit,FPCR_ENABLE(%a6) # was BSUN set?
-	bne.w		fscc_bsun
-
-#
-# the bsun exception bit was not set.
-# the result has been selected.
-# now, check to see if the result is to be stored in the data register
-# file or in memory.
-#
-fscc_done:
-	mov.l		%d0,%a0			# save result for a moment
-
-	mov.b		1+EXC_OPWORD(%a6),%d1	# fetch lo opword
-	mov.l		%d1,%d0			# make a copy
-	andi.b		&0x38,%d1		# extract src mode
-
-	bne.b		fscc_mem_op		# it's a memory operation
-
-	mov.l		%d0,%d1
-	andi.w		&0x7,%d1		# pass index in d1
-	mov.l		%a0,%d0			# pass result in d0
-	bsr.l		store_dreg_b		# save result in regfile
-	rts
-
-#
-# the stacked <ea> is correct with the exception of:
-#	-> Dn : <ea> is garbage
-#
-# if the addressing mode is post-increment or pre-decrement,
-# then the address registers have not been updated.
-#
-fscc_mem_op:
-	cmpi.b		%d1,&0x18		# is <ea> (An)+ ?
-	beq.b		fscc_mem_inc		# yes
-	cmpi.b		%d1,&0x20		# is <ea> -(An) ?
-	beq.b		fscc_mem_dec		# yes
-
-	mov.l		%a0,%d0			# pass result in d0
-	mov.l		EXC_EA(%a6),%a0		# fetch <ea>
-	bsr.l		_dmem_write_byte	# write result byte
-
-	tst.l		%d1			# did dstore fail?
-	bne.w		fscc_err		# yes
-
-	rts
-
-# addressing mode is post-increment. write the result byte. if the write
-# fails then don't update the address register. if write passes then
-# call inc_areg() to update the address register.
-fscc_mem_inc:
-	mov.l		%a0,%d0			# pass result in d0
-	mov.l		EXC_EA(%a6),%a0		# fetch <ea>
-	bsr.l		_dmem_write_byte	# write result byte
-
-	tst.l		%d1			# did dstore fail?
-	bne.w		fscc_err		# yes
-
-	mov.b		0x1+EXC_OPWORD(%a6),%d1	# fetch opword
-	andi.w		&0x7,%d1		# pass index in d1
-	movq.l		&0x1,%d0		# pass amt to inc by
-	bsr.l		inc_areg		# increment address register
-
-	rts
-
-# addressing mode is pre-decrement. write the result byte. if the write
-# fails then don't update the address register. if the write passes then
-# call dec_areg() to update the address register.
-fscc_mem_dec:
-	mov.l		%a0,%d0			# pass result in d0
-	mov.l		EXC_EA(%a6),%a0		# fetch <ea>
-	bsr.l		_dmem_write_byte	# write result byte
-
-	tst.l		%d1			# did dstore fail?
-	bne.w		fscc_err		# yes
-
-	mov.b		0x1+EXC_OPWORD(%a6),%d1	# fetch opword
-	andi.w		&0x7,%d1		# pass index in d1
-	movq.l		&0x1,%d0		# pass amt to dec by
-	bsr.l		dec_areg		# decrement address register
-
-	rts
-
-# the emulation routine set bsun and BSUN was enabled. have to
-# fix stack and jump to the bsun handler.
-# let the caller of this routine shift the stack frame up to
-# eliminate the effective address field.
-fscc_bsun:
-	mov.b		&fbsun_flg,SPCOND_FLG(%a6)
-	rts
-
-# the byte write to memory has failed. pass the failing effective address
-# and a FSLW to funimp_dacc().
-fscc_err:
-	mov.w		&0x00a1,EXC_VOFF(%a6)
-	bra.l		facc_finish
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	fmovm_dynamic(): emulate "fmovm" dynamic instruction		#
-#									#
-# XREF ****************************************************************	#
-#	fetch_dreg() - fetch data register				#
-#	{i,d,}mem_read() - fetch data from memory			#
-#	_mem_write() - write data to memory				#
-#	iea_iacc() - instruction memory access error occurred		#
-#	iea_dacc() - data memory access error occurred			#
-#	restore() - restore An index regs if access error occurred	#
-#									#
-# INPUT ***************************************************************	#
-#	None								#
-#									#
-# OUTPUT **************************************************************	#
-#	If instr is "fmovm Dn,-(A7)" from supervisor mode,		#
-#		d0 = size of dump					#
-#		d1 = Dn							#
-#	Else if instruction access error,				#
-#		d0 = FSLW						#
-#	Else if data access error,					#
-#		d0 = FSLW						#
-#		a0 = address of fault					#
-#	Else								#
-#		none.							#
-#									#
-# ALGORITHM ***********************************************************	#
-#	The effective address must be calculated since this is entered	#
-# from an "Unimplemented Effective Address" exception handler. So, we	#
-# have our own fcalc_ea() routine here. If an access error is flagged	#
-# by a _{i,d,}mem_read() call, we must exit through the special		#
-# handler.								#
-#	The data register is determined and its value loaded to get the	#
-# string of FP registers affected. This value is used as an index into	#
-# a lookup table such that we can determine the number of bytes		#
-# involved.								#
-#	If the instruction is "fmovm.x <ea>,Dn", a _mem_read() is used	#
-# to read in all FP values. Again, _mem_read() may fail and require a	#
-# special exit.								#
-#	If the instruction is "fmovm.x DN,<ea>", a _mem_write() is used	#
-# to write all FP values. _mem_write() may also fail.			#
-#	If the instruction is "fmovm.x DN,-(a7)" from supervisor mode,	#
-# then we return the size of the dump and the string to the caller	#
-# so that the move can occur outside of this routine. This special	#
-# case is required so that moves to the system stack are handled	#
-# correctly.								#
-#									#
-# DYNAMIC:								#
-#	fmovm.x	dn, <ea>						#
-#	fmovm.x	<ea>, dn						#
-#									#
-#	      <WORD 1>		      <WORD2>				#
-#	1111 0010 00 |<ea>|	11@& 1000 0$$$ 0000			#
-#									#
-#	& = (0): predecrement addressing mode				#
-#	    (1): postincrement or control addressing mode		#
-#	@ = (0): move listed regs from memory to the FPU		#
-#	    (1): move listed regs from the FPU to memory		#
-#	$$$    : index of data register holding reg select mask		#
-#									#
-# NOTES:								#
-#	If the data register holds a zero, then the			#
-#	instruction is a nop.						#
-#									#
-#########################################################################
-
-	global		fmovm_dynamic
-fmovm_dynamic:
-
-# extract the data register in which the bit string resides...
-	mov.b		1+EXC_EXTWORD(%a6),%d1	# fetch extword
-	andi.w		&0x70,%d1		# extract reg bits
-	lsr.b		&0x4,%d1		# shift into lo bits
-
-# fetch the bit string into d0...
-	bsr.l		fetch_dreg		# fetch reg string
-
-	andi.l		&0x000000ff,%d0		# keep only lo byte
-
-	mov.l		%d0,-(%sp)		# save strg
-	mov.b		(tbl_fmovm_size.w,%pc,%d0),%d0
-	mov.l		%d0,-(%sp)		# save size
-	bsr.l		fmovm_calc_ea		# calculate <ea>
-	mov.l		(%sp)+,%d0		# restore size
-	mov.l		(%sp)+,%d1		# restore strg
-
-# if the bit string is a zero, then the operation is a no-op
-# but, make sure that we've calculated ea and advanced the opword pointer
-	beq.w		fmovm_data_done
-
-# separate move ins from move outs...
-	btst		&0x5,EXC_EXTWORD(%a6)	# is it a move in or out?
-	beq.w		fmovm_data_in		# it's a move out
-
-#############
-# MOVE OUT: #
-#############
-fmovm_data_out:
-	btst		&0x4,EXC_EXTWORD(%a6)	# control or predecrement?
-	bne.w		fmovm_out_ctrl		# control
-
-############################
-fmovm_out_predec:
-# for predecrement mode, the bit string is the opposite of both control
-# operations and postincrement mode. (bit7 = FP7 ... bit0 = FP0)
-# here, we convert it to be just like the others...
-	mov.b		(tbl_fmovm_convert.w,%pc,%d1.w*1),%d1
-
-	btst		&0x5,EXC_SR(%a6)	# user or supervisor mode?
-	beq.b		fmovm_out_ctrl		# user
-
-fmovm_out_predec_s:
-	cmpi.b		SPCOND_FLG(%a6),&mda7_flg # is <ea> mode -(a7)?
-	bne.b		fmovm_out_ctrl
-
-# the operation was unfortunately an: fmovm.x dn,-(sp)
-# called from supervisor mode.
-# we're also passing "size" and "strg" back to the calling routine
-	rts
-
-############################
-fmovm_out_ctrl:
-	mov.l		%a0,%a1			# move <ea> to a1
-
-	sub.l		%d0,%sp			# subtract size of dump
-	lea		(%sp),%a0
-
-	tst.b		%d1			# should FP0 be moved?
-	bpl.b		fmovm_out_ctrl_fp1	# no
-
-	mov.l		0x0+EXC_FP0(%a6),(%a0)+	# yes
-	mov.l		0x4+EXC_FP0(%a6),(%a0)+
-	mov.l		0x8+EXC_FP0(%a6),(%a0)+
-
-fmovm_out_ctrl_fp1:
-	lsl.b		&0x1,%d1		# should FP1 be moved?
-	bpl.b		fmovm_out_ctrl_fp2	# no
-
-	mov.l		0x0+EXC_FP1(%a6),(%a0)+	# yes
-	mov.l		0x4+EXC_FP1(%a6),(%a0)+
-	mov.l		0x8+EXC_FP1(%a6),(%a0)+
-
-fmovm_out_ctrl_fp2:
-	lsl.b		&0x1,%d1		# should FP2 be moved?
-	bpl.b		fmovm_out_ctrl_fp3	# no
-
-	fmovm.x		&0x20,(%a0)		# yes
-	add.l		&0xc,%a0
-
-fmovm_out_ctrl_fp3:
-	lsl.b		&0x1,%d1		# should FP3 be moved?
-	bpl.b		fmovm_out_ctrl_fp4	# no
-
-	fmovm.x		&0x10,(%a0)		# yes
-	add.l		&0xc,%a0
-
-fmovm_out_ctrl_fp4:
-	lsl.b		&0x1,%d1		# should FP4 be moved?
-	bpl.b		fmovm_out_ctrl_fp5	# no
-
-	fmovm.x		&0x08,(%a0)		# yes
-	add.l		&0xc,%a0
-
-fmovm_out_ctrl_fp5:
-	lsl.b		&0x1,%d1		# should FP5 be moved?
-	bpl.b		fmovm_out_ctrl_fp6	# no
-
-	fmovm.x		&0x04,(%a0)		# yes
-	add.l		&0xc,%a0
-
-fmovm_out_ctrl_fp6:
-	lsl.b		&0x1,%d1		# should FP6 be moved?
-	bpl.b		fmovm_out_ctrl_fp7	# no
-
-	fmovm.x		&0x02,(%a0)		# yes
-	add.l		&0xc,%a0
-
-fmovm_out_ctrl_fp7:
-	lsl.b		&0x1,%d1		# should FP7 be moved?
-	bpl.b		fmovm_out_ctrl_done	# no
-
-	fmovm.x		&0x01,(%a0)		# yes
-	add.l		&0xc,%a0
-
-fmovm_out_ctrl_done:
-	mov.l		%a1,L_SCR1(%a6)
-
-	lea		(%sp),%a0		# pass: supervisor src
-	mov.l		%d0,-(%sp)		# save size
-	bsr.l		_dmem_write		# copy data to user mem
-
-	mov.l		(%sp)+,%d0
-	add.l		%d0,%sp			# clear fpreg data from stack
-
-	tst.l		%d1			# did dstore err?
-	bne.w		fmovm_out_err		# yes
-
-	rts
-
-############
-# MOVE IN: #
-############
-fmovm_data_in:
-	mov.l		%a0,L_SCR1(%a6)
-
-	sub.l		%d0,%sp			# make room for fpregs
-	lea		(%sp),%a1
-
-	mov.l		%d1,-(%sp)		# save bit string for later
-	mov.l		%d0,-(%sp)		# save # of bytes
-
-	bsr.l		_dmem_read		# copy data from user mem
-
-	mov.l		(%sp)+,%d0		# retrieve # of bytes
-
-	tst.l		%d1			# did dfetch fail?
-	bne.w		fmovm_in_err		# yes
-
-	mov.l		(%sp)+,%d1		# load bit string
-
-	lea		(%sp),%a0		# addr of stack
-
-	tst.b		%d1			# should FP0 be moved?
-	bpl.b		fmovm_data_in_fp1	# no
-
-	mov.l		(%a0)+,0x0+EXC_FP0(%a6)	# yes
-	mov.l		(%a0)+,0x4+EXC_FP0(%a6)
-	mov.l		(%a0)+,0x8+EXC_FP0(%a6)
-
-fmovm_data_in_fp1:
-	lsl.b		&0x1,%d1		# should FP1 be moved?
-	bpl.b		fmovm_data_in_fp2	# no
-
-	mov.l		(%a0)+,0x0+EXC_FP1(%a6)	# yes
-	mov.l		(%a0)+,0x4+EXC_FP1(%a6)
-	mov.l		(%a0)+,0x8+EXC_FP1(%a6)
-
-fmovm_data_in_fp2:
-	lsl.b		&0x1,%d1		# should FP2 be moved?
-	bpl.b		fmovm_data_in_fp3	# no
-
-	fmovm.x		(%a0)+,&0x20		# yes
-
-fmovm_data_in_fp3:
-	lsl.b		&0x1,%d1		# should FP3 be moved?
-	bpl.b		fmovm_data_in_fp4	# no
-
-	fmovm.x		(%a0)+,&0x10		# yes
-
-fmovm_data_in_fp4:
-	lsl.b		&0x1,%d1		# should FP4 be moved?
-	bpl.b		fmovm_data_in_fp5	# no
-
-	fmovm.x		(%a0)+,&0x08		# yes
-
-fmovm_data_in_fp5:
-	lsl.b		&0x1,%d1		# should FP5 be moved?
-	bpl.b		fmovm_data_in_fp6	# no
-
-	fmovm.x		(%a0)+,&0x04		# yes
-
-fmovm_data_in_fp6:
-	lsl.b		&0x1,%d1		# should FP6 be moved?
-	bpl.b		fmovm_data_in_fp7	# no
-
-	fmovm.x		(%a0)+,&0x02		# yes
-
-fmovm_data_in_fp7:
-	lsl.b		&0x1,%d1		# should FP7 be moved?
-	bpl.b		fmovm_data_in_done	# no
-
-	fmovm.x		(%a0)+,&0x01		# yes
-
-fmovm_data_in_done:
-	add.l		%d0,%sp			# remove fpregs from stack
-	rts
-
-#####################################
-
-fmovm_data_done:
-	rts
-
-##############################################################################
-
-#
-# table indexed by the operation's bit string that gives the number
-# of bytes that will be moved.
-#
-# number of bytes = (# of 1's in bit string) * 12(bytes/fpreg)
-#
-tbl_fmovm_size:
-	byte	0x00,0x0c,0x0c,0x18,0x0c,0x18,0x18,0x24
-	byte	0x0c,0x18,0x18,0x24,0x18,0x24,0x24,0x30
-	byte	0x0c,0x18,0x18,0x24,0x18,0x24,0x24,0x30
-	byte	0x18,0x24,0x24,0x30,0x24,0x30,0x30,0x3c
-	byte	0x0c,0x18,0x18,0x24,0x18,0x24,0x24,0x30
-	byte	0x18,0x24,0x24,0x30,0x24,0x30,0x30,0x3c
-	byte	0x18,0x24,0x24,0x30,0x24,0x30,0x30,0x3c
-	byte	0x24,0x30,0x30,0x3c,0x30,0x3c,0x3c,0x48
-	byte	0x0c,0x18,0x18,0x24,0x18,0x24,0x24,0x30
-	byte	0x18,0x24,0x24,0x30,0x24,0x30,0x30,0x3c
-	byte	0x18,0x24,0x24,0x30,0x24,0x30,0x30,0x3c
-	byte	0x24,0x30,0x30,0x3c,0x30,0x3c,0x3c,0x48
-	byte	0x18,0x24,0x24,0x30,0x24,0x30,0x30,0x3c
-	byte	0x24,0x30,0x30,0x3c,0x30,0x3c,0x3c,0x48
-	byte	0x24,0x30,0x30,0x3c,0x30,0x3c,0x3c,0x48
-	byte	0x30,0x3c,0x3c,0x48,0x3c,0x48,0x48,0x54
-	byte	0x0c,0x18,0x18,0x24,0x18,0x24,0x24,0x30
-	byte	0x18,0x24,0x24,0x30,0x24,0x30,0x30,0x3c
-	byte	0x18,0x24,0x24,0x30,0x24,0x30,0x30,0x3c
-	byte	0x24,0x30,0x30,0x3c,0x30,0x3c,0x3c,0x48
-	byte	0x18,0x24,0x24,0x30,0x24,0x30,0x30,0x3c
-	byte	0x24,0x30,0x30,0x3c,0x30,0x3c,0x3c,0x48
-	byte	0x24,0x30,0x30,0x3c,0x30,0x3c,0x3c,0x48
-	byte	0x30,0x3c,0x3c,0x48,0x3c,0x48,0x48,0x54
-	byte	0x18,0x24,0x24,0x30,0x24,0x30,0x30,0x3c
-	byte	0x24,0x30,0x30,0x3c,0x30,0x3c,0x3c,0x48
-	byte	0x24,0x30,0x30,0x3c,0x30,0x3c,0x3c,0x48
-	byte	0x30,0x3c,0x3c,0x48,0x3c,0x48,0x48,0x54
-	byte	0x24,0x30,0x30,0x3c,0x30,0x3c,0x3c,0x48
-	byte	0x30,0x3c,0x3c,0x48,0x3c,0x48,0x48,0x54
-	byte	0x30,0x3c,0x3c,0x48,0x3c,0x48,0x48,0x54
-	byte	0x3c,0x48,0x48,0x54,0x48,0x54,0x54,0x60
-
-#
-# table to convert a pre-decrement bit string into a post-increment
-# or control bit string.
-# ex:	0x00	==>	0x00
-#	0x01	==>	0x80
-#	0x02	==>	0x40
-#		.
-#		.
-#	0xfd	==>	0xbf
-#	0xfe	==>	0x7f
-#	0xff	==>	0xff
-#
-tbl_fmovm_convert:
-	byte	0x00,0x80,0x40,0xc0,0x20,0xa0,0x60,0xe0
-	byte	0x10,0x90,0x50,0xd0,0x30,0xb0,0x70,0xf0
-	byte	0x08,0x88,0x48,0xc8,0x28,0xa8,0x68,0xe8
-	byte	0x18,0x98,0x58,0xd8,0x38,0xb8,0x78,0xf8
-	byte	0x04,0x84,0x44,0xc4,0x24,0xa4,0x64,0xe4
-	byte	0x14,0x94,0x54,0xd4,0x34,0xb4,0x74,0xf4
-	byte	0x0c,0x8c,0x4c,0xcc,0x2c,0xac,0x6c,0xec
-	byte	0x1c,0x9c,0x5c,0xdc,0x3c,0xbc,0x7c,0xfc
-	byte	0x02,0x82,0x42,0xc2,0x22,0xa2,0x62,0xe2
-	byte	0x12,0x92,0x52,0xd2,0x32,0xb2,0x72,0xf2
-	byte	0x0a,0x8a,0x4a,0xca,0x2a,0xaa,0x6a,0xea
-	byte	0x1a,0x9a,0x5a,0xda,0x3a,0xba,0x7a,0xfa
-	byte	0x06,0x86,0x46,0xc6,0x26,0xa6,0x66,0xe6
-	byte	0x16,0x96,0x56,0xd6,0x36,0xb6,0x76,0xf6
-	byte	0x0e,0x8e,0x4e,0xce,0x2e,0xae,0x6e,0xee
-	byte	0x1e,0x9e,0x5e,0xde,0x3e,0xbe,0x7e,0xfe
-	byte	0x01,0x81,0x41,0xc1,0x21,0xa1,0x61,0xe1
-	byte	0x11,0x91,0x51,0xd1,0x31,0xb1,0x71,0xf1
-	byte	0x09,0x89,0x49,0xc9,0x29,0xa9,0x69,0xe9
-	byte	0x19,0x99,0x59,0xd9,0x39,0xb9,0x79,0xf9
-	byte	0x05,0x85,0x45,0xc5,0x25,0xa5,0x65,0xe5
-	byte	0x15,0x95,0x55,0xd5,0x35,0xb5,0x75,0xf5
-	byte	0x0d,0x8d,0x4d,0xcd,0x2d,0xad,0x6d,0xed
-	byte	0x1d,0x9d,0x5d,0xdd,0x3d,0xbd,0x7d,0xfd
-	byte	0x03,0x83,0x43,0xc3,0x23,0xa3,0x63,0xe3
-	byte	0x13,0x93,0x53,0xd3,0x33,0xb3,0x73,0xf3
-	byte	0x0b,0x8b,0x4b,0xcb,0x2b,0xab,0x6b,0xeb
-	byte	0x1b,0x9b,0x5b,0xdb,0x3b,0xbb,0x7b,0xfb
-	byte	0x07,0x87,0x47,0xc7,0x27,0xa7,0x67,0xe7
-	byte	0x17,0x97,0x57,0xd7,0x37,0xb7,0x77,0xf7
-	byte	0x0f,0x8f,0x4f,0xcf,0x2f,0xaf,0x6f,0xef
-	byte	0x1f,0x9f,0x5f,0xdf,0x3f,0xbf,0x7f,0xff
-
-	global		fmovm_calc_ea
-###############################################
-# _fmovm_calc_ea: calculate effective address #
-###############################################
-fmovm_calc_ea:
-	mov.l		%d0,%a0			# move # bytes to a0
-
-# currently, MODE and REG are taken from the EXC_OPWORD. this could be
-# easily changed if they were inputs passed in registers.
-	mov.w		EXC_OPWORD(%a6),%d0	# fetch opcode word
-	mov.w		%d0,%d1			# make a copy
-
-	andi.w		&0x3f,%d0		# extract mode field
-	andi.l		&0x7,%d1		# extract reg  field
-
-# jump to the corresponding function for each {MODE,REG} pair.
-	mov.w		(tbl_fea_mode.b,%pc,%d0.w*2),%d0 # fetch jmp distance
-	jmp		(tbl_fea_mode.b,%pc,%d0.w*1) # jmp to correct ea mode
-
-	swbeg		&64
-tbl_fea_mode:
-	short		tbl_fea_mode	-	tbl_fea_mode
-	short		tbl_fea_mode	-	tbl_fea_mode
-	short		tbl_fea_mode	-	tbl_fea_mode
-	short		tbl_fea_mode	-	tbl_fea_mode
-	short		tbl_fea_mode	-	tbl_fea_mode
-	short		tbl_fea_mode	-	tbl_fea_mode
-	short		tbl_fea_mode	-	tbl_fea_mode
-	short		tbl_fea_mode	-	tbl_fea_mode
-
-	short		tbl_fea_mode	-	tbl_fea_mode
-	short		tbl_fea_mode	-	tbl_fea_mode
-	short		tbl_fea_mode	-	tbl_fea_mode
-	short		tbl_fea_mode	-	tbl_fea_mode
-	short		tbl_fea_mode	-	tbl_fea_mode
-	short		tbl_fea_mode	-	tbl_fea_mode
-	short		tbl_fea_mode	-	tbl_fea_mode
-	short		tbl_fea_mode	-	tbl_fea_mode
-
-	short		faddr_ind_a0	-	tbl_fea_mode
-	short		faddr_ind_a1	-	tbl_fea_mode
-	short		faddr_ind_a2	-	tbl_fea_mode
-	short		faddr_ind_a3	-	tbl_fea_mode
-	short		faddr_ind_a4	-	tbl_fea_mode
-	short		faddr_ind_a5	-	tbl_fea_mode
-	short		faddr_ind_a6	-	tbl_fea_mode
-	short		faddr_ind_a7	-	tbl_fea_mode
-
-	short		faddr_ind_p_a0	-	tbl_fea_mode
-	short		faddr_ind_p_a1	-	tbl_fea_mode
-	short		faddr_ind_p_a2	-	tbl_fea_mode
-	short		faddr_ind_p_a3	-	tbl_fea_mode
-	short		faddr_ind_p_a4	-	tbl_fea_mode
-	short		faddr_ind_p_a5	-	tbl_fea_mode
-	short		faddr_ind_p_a6	-	tbl_fea_mode
-	short		faddr_ind_p_a7	-	tbl_fea_mode
-
-	short		faddr_ind_m_a0	-	tbl_fea_mode
-	short		faddr_ind_m_a1	-	tbl_fea_mode
-	short		faddr_ind_m_a2	-	tbl_fea_mode
-	short		faddr_ind_m_a3	-	tbl_fea_mode
-	short		faddr_ind_m_a4	-	tbl_fea_mode
-	short		faddr_ind_m_a5	-	tbl_fea_mode
-	short		faddr_ind_m_a6	-	tbl_fea_mode
-	short		faddr_ind_m_a7	-	tbl_fea_mode
-
-	short		faddr_ind_disp_a0	-	tbl_fea_mode
-	short		faddr_ind_disp_a1	-	tbl_fea_mode
-	short		faddr_ind_disp_a2	-	tbl_fea_mode
-	short		faddr_ind_disp_a3	-	tbl_fea_mode
-	short		faddr_ind_disp_a4	-	tbl_fea_mode
-	short		faddr_ind_disp_a5	-	tbl_fea_mode
-	short		faddr_ind_disp_a6	-	tbl_fea_mode
-	short		faddr_ind_disp_a7	-	tbl_fea_mode
-
-	short		faddr_ind_ext	-	tbl_fea_mode
-	short		faddr_ind_ext	-	tbl_fea_mode
-	short		faddr_ind_ext	-	tbl_fea_mode
-	short		faddr_ind_ext	-	tbl_fea_mode
-	short		faddr_ind_ext	-	tbl_fea_mode
-	short		faddr_ind_ext	-	tbl_fea_mode
-	short		faddr_ind_ext	-	tbl_fea_mode
-	short		faddr_ind_ext	-	tbl_fea_mode
-
-	short		fabs_short	-	tbl_fea_mode
-	short		fabs_long	-	tbl_fea_mode
-	short		fpc_ind		-	tbl_fea_mode
-	short		fpc_ind_ext	-	tbl_fea_mode
-	short		tbl_fea_mode	-	tbl_fea_mode
-	short		tbl_fea_mode	-	tbl_fea_mode
-	short		tbl_fea_mode	-	tbl_fea_mode
-	short		tbl_fea_mode	-	tbl_fea_mode
-
-###################################
-# Address register indirect: (An) #
-###################################
-faddr_ind_a0:
-	mov.l		EXC_DREGS+0x8(%a6),%a0	# Get current a0
-	rts
-
-faddr_ind_a1:
-	mov.l		EXC_DREGS+0xc(%a6),%a0	# Get current a1
-	rts
-
-faddr_ind_a2:
-	mov.l		%a2,%a0			# Get current a2
-	rts
-
-faddr_ind_a3:
-	mov.l		%a3,%a0			# Get current a3
-	rts
-
-faddr_ind_a4:
-	mov.l		%a4,%a0			# Get current a4
-	rts
-
-faddr_ind_a5:
-	mov.l		%a5,%a0			# Get current a5
-	rts
-
-faddr_ind_a6:
-	mov.l		(%a6),%a0		# Get current a6
-	rts
-
-faddr_ind_a7:
-	mov.l		EXC_A7(%a6),%a0		# Get current a7
-	rts
-
-#####################################################
-# Address register indirect w/ postincrement: (An)+ #
-#####################################################
-faddr_ind_p_a0:
-	mov.l		EXC_DREGS+0x8(%a6),%d0	# Get current a0
-	mov.l		%d0,%d1
-	add.l		%a0,%d1			# Increment
-	mov.l		%d1,EXC_DREGS+0x8(%a6)	# Save incr value
-	mov.l		%d0,%a0
-	rts
-
-faddr_ind_p_a1:
-	mov.l		EXC_DREGS+0xc(%a6),%d0	# Get current a1
-	mov.l		%d0,%d1
-	add.l		%a0,%d1			# Increment
-	mov.l		%d1,EXC_DREGS+0xc(%a6)	# Save incr value
-	mov.l		%d0,%a0
-	rts
-
-faddr_ind_p_a2:
-	mov.l		%a2,%d0			# Get current a2
-	mov.l		%d0,%d1
-	add.l		%a0,%d1			# Increment
-	mov.l		%d1,%a2			# Save incr value
-	mov.l		%d0,%a0
-	rts
-
-faddr_ind_p_a3:
-	mov.l		%a3,%d0			# Get current a3
-	mov.l		%d0,%d1
-	add.l		%a0,%d1			# Increment
-	mov.l		%d1,%a3			# Save incr value
-	mov.l		%d0,%a0
-	rts
-
-faddr_ind_p_a4:
-	mov.l		%a4,%d0			# Get current a4
-	mov.l		%d0,%d1
-	add.l		%a0,%d1			# Increment
-	mov.l		%d1,%a4			# Save incr value
-	mov.l		%d0,%a0
-	rts
-
-faddr_ind_p_a5:
-	mov.l		%a5,%d0			# Get current a5
-	mov.l		%d0,%d1
-	add.l		%a0,%d1			# Increment
-	mov.l		%d1,%a5			# Save incr value
-	mov.l		%d0,%a0
-	rts
-
-faddr_ind_p_a6:
-	mov.l		(%a6),%d0		# Get current a6
-	mov.l		%d0,%d1
-	add.l		%a0,%d1			# Increment
-	mov.l		%d1,(%a6)		# Save incr value
-	mov.l		%d0,%a0
-	rts
-
-faddr_ind_p_a7:
-	mov.b		&mia7_flg,SPCOND_FLG(%a6) # set "special case" flag
-
-	mov.l		EXC_A7(%a6),%d0		# Get current a7
-	mov.l		%d0,%d1
-	add.l		%a0,%d1			# Increment
-	mov.l		%d1,EXC_A7(%a6)		# Save incr value
-	mov.l		%d0,%a0
-	rts
-
-####################################################
-# Address register indirect w/ predecrement: -(An) #
-####################################################
-faddr_ind_m_a0:
-	mov.l		EXC_DREGS+0x8(%a6),%d0	# Get current a0
-	sub.l		%a0,%d0			# Decrement
-	mov.l		%d0,EXC_DREGS+0x8(%a6)	# Save decr value
-	mov.l		%d0,%a0
-	rts
-
-faddr_ind_m_a1:
-	mov.l		EXC_DREGS+0xc(%a6),%d0	# Get current a1
-	sub.l		%a0,%d0			# Decrement
-	mov.l		%d0,EXC_DREGS+0xc(%a6)	# Save decr value
-	mov.l		%d0,%a0
-	rts
-
-faddr_ind_m_a2:
-	mov.l		%a2,%d0			# Get current a2
-	sub.l		%a0,%d0			# Decrement
-	mov.l		%d0,%a2			# Save decr value
-	mov.l		%d0,%a0
-	rts
-
-faddr_ind_m_a3:
-	mov.l		%a3,%d0			# Get current a3
-	sub.l		%a0,%d0			# Decrement
-	mov.l		%d0,%a3			# Save decr value
-	mov.l		%d0,%a0
-	rts
-
-faddr_ind_m_a4:
-	mov.l		%a4,%d0			# Get current a4
-	sub.l		%a0,%d0			# Decrement
-	mov.l		%d0,%a4			# Save decr value
-	mov.l		%d0,%a0
-	rts
-
-faddr_ind_m_a5:
-	mov.l		%a5,%d0			# Get current a5
-	sub.l		%a0,%d0			# Decrement
-	mov.l		%d0,%a5			# Save decr value
-	mov.l		%d0,%a0
-	rts
-
-faddr_ind_m_a6:
-	mov.l		(%a6),%d0		# Get current a6
-	sub.l		%a0,%d0			# Decrement
-	mov.l		%d0,(%a6)		# Save decr value
-	mov.l		%d0,%a0
-	rts
-
-faddr_ind_m_a7:
-	mov.b		&mda7_flg,SPCOND_FLG(%a6) # set "special case" flag
-
-	mov.l		EXC_A7(%a6),%d0		# Get current a7
-	sub.l		%a0,%d0			# Decrement
-	mov.l		%d0,EXC_A7(%a6)		# Save decr value
-	mov.l		%d0,%a0
-	rts
-
-########################################################
-# Address register indirect w/ displacement: (d16, An) #
-########################################################
-faddr_ind_disp_a0:
-	mov.l		EXC_EXTWPTR(%a6),%a0	# fetch instruction addr
-	addq.l		&0x2,EXC_EXTWPTR(%a6)	# incr instruction ptr
-	bsr.l		_imem_read_word
-
-	tst.l		%d1			# did ifetch fail?
-	bne.l		iea_iacc		# yes
-
-	mov.w		%d0,%a0			# sign extend displacement
-
-	add.l		EXC_DREGS+0x8(%a6),%a0	# a0 + d16
-	rts
-
-faddr_ind_disp_a1:
-	mov.l		EXC_EXTWPTR(%a6),%a0	# fetch instruction addr
-	addq.l		&0x2,EXC_EXTWPTR(%a6)	# incr instruction ptr
-	bsr.l		_imem_read_word
-
-	tst.l		%d1			# did ifetch fail?
-	bne.l		iea_iacc		# yes
-
-	mov.w		%d0,%a0			# sign extend displacement
-
-	add.l		EXC_DREGS+0xc(%a6),%a0	# a1 + d16
-	rts
-
-faddr_ind_disp_a2:
-	mov.l		EXC_EXTWPTR(%a6),%a0	# fetch instruction addr
-	addq.l		&0x2,EXC_EXTWPTR(%a6)	# incr instruction ptr
-	bsr.l		_imem_read_word
-
-	tst.l		%d1			# did ifetch fail?
-	bne.l		iea_iacc		# yes
-
-	mov.w		%d0,%a0			# sign extend displacement
-
-	add.l		%a2,%a0			# a2 + d16
-	rts
-
-faddr_ind_disp_a3:
-	mov.l		EXC_EXTWPTR(%a6),%a0	# fetch instruction addr
-	addq.l		&0x2,EXC_EXTWPTR(%a6)	# incr instruction ptr
-	bsr.l		_imem_read_word
-
-	tst.l		%d1			# did ifetch fail?
-	bne.l		iea_iacc		# yes
-
-	mov.w		%d0,%a0			# sign extend displacement
-
-	add.l		%a3,%a0			# a3 + d16
-	rts
-
-faddr_ind_disp_a4:
-	mov.l		EXC_EXTWPTR(%a6),%a0	# fetch instruction addr
-	addq.l		&0x2,EXC_EXTWPTR(%a6)	# incr instruction ptr
-	bsr.l		_imem_read_word
-
-	tst.l		%d1			# did ifetch fail?
-	bne.l		iea_iacc		# yes
-
-	mov.w		%d0,%a0			# sign extend displacement
-
-	add.l		%a4,%a0			# a4 + d16
-	rts
-
-faddr_ind_disp_a5:
-	mov.l		EXC_EXTWPTR(%a6),%a0	# fetch instruction addr
-	addq.l		&0x2,EXC_EXTWPTR(%a6)	# incr instruction ptr
-	bsr.l		_imem_read_word
-
-	tst.l		%d1			# did ifetch fail?
-	bne.l		iea_iacc		# yes
-
-	mov.w		%d0,%a0			# sign extend displacement
-
-	add.l		%a5,%a0			# a5 + d16
-	rts
-
-faddr_ind_disp_a6:
-	mov.l		EXC_EXTWPTR(%a6),%a0	# fetch instruction addr
-	addq.l		&0x2,EXC_EXTWPTR(%a6)	# incr instruction ptr
-	bsr.l		_imem_read_word
-
-	tst.l		%d1			# did ifetch fail?
-	bne.l		iea_iacc		# yes
-
-	mov.w		%d0,%a0			# sign extend displacement
-
-	add.l		(%a6),%a0		# a6 + d16
-	rts
-
-faddr_ind_disp_a7:
-	mov.l		EXC_EXTWPTR(%a6),%a0	# fetch instruction addr
-	addq.l		&0x2,EXC_EXTWPTR(%a6)	# incr instruction ptr
-	bsr.l		_imem_read_word
-
-	tst.l		%d1			# did ifetch fail?
-	bne.l		iea_iacc		# yes
-
-	mov.w		%d0,%a0			# sign extend displacement
-
-	add.l		EXC_A7(%a6),%a0		# a7 + d16
-	rts
-
-########################################################################
-# Address register indirect w/ index(8-bit displacement): (d8, An, Xn) #
-#    "       "         "    w/   "  (base displacement): (bd, An, Xn)  #
-# Memory indirect postindexed: ([bd, An], Xn, od)		       #
-# Memory indirect preindexed: ([bd, An, Xn], od)		       #
-########################################################################
-faddr_ind_ext:
-	addq.l		&0x8,%d1
-	bsr.l		fetch_dreg		# fetch base areg
-	mov.l		%d0,-(%sp)
-
-	mov.l		EXC_EXTWPTR(%a6),%a0	# fetch instruction addr
-	addq.l		&0x2,EXC_EXTWPTR(%a6)	# incr instruction ptr
-	bsr.l		_imem_read_word		# fetch extword in d0
-
-	tst.l		%d1			# did ifetch fail?
-	bne.l		iea_iacc		# yes
-
-	mov.l		(%sp)+,%a0
-
-	btst		&0x8,%d0
-	bne.w		fcalc_mem_ind
-
-	mov.l		%d0,L_SCR1(%a6)		# hold opword
-
-	mov.l		%d0,%d1
-	rol.w		&0x4,%d1
-	andi.w		&0xf,%d1		# extract index regno
-
-# count on fetch_dreg() not to alter a0...
-	bsr.l		fetch_dreg		# fetch index
-
-	mov.l		%d2,-(%sp)		# save d2
-	mov.l		L_SCR1(%a6),%d2		# fetch opword
-
-	btst		&0xb,%d2		# is it word or long?
-	bne.b		faii8_long
-	ext.l		%d0			# sign extend word index
-faii8_long:
-	mov.l		%d2,%d1
-	rol.w		&0x7,%d1
-	andi.l		&0x3,%d1		# extract scale value
-
-	lsl.l		%d1,%d0			# shift index by scale
-
-	extb.l		%d2			# sign extend displacement
-	add.l		%d2,%d0			# index + disp
-	add.l		%d0,%a0			# An + (index + disp)
-
-	mov.l		(%sp)+,%d2		# restore old d2
-	rts
-
-###########################
-# Absolute short: (XXX).W #
-###########################
-fabs_short:
-	mov.l		EXC_EXTWPTR(%a6),%a0	# fetch instruction addr
-	addq.l		&0x2,EXC_EXTWPTR(%a6)	# incr instruction ptr
-	bsr.l		_imem_read_word		# fetch short address
-
-	tst.l		%d1			# did ifetch fail?
-	bne.l		iea_iacc		# yes
-
-	mov.w		%d0,%a0			# return <ea> in a0
-	rts
-
-##########################
-# Absolute long: (XXX).L #
-##########################
-fabs_long:
-	mov.l		EXC_EXTWPTR(%a6),%a0	# fetch instruction addr
-	addq.l		&0x4,EXC_EXTWPTR(%a6)	# incr instruction ptr
-	bsr.l		_imem_read_long		# fetch long address
-
-	tst.l		%d1			# did ifetch fail?
-	bne.l		iea_iacc		# yes
-
-	mov.l		%d0,%a0			# return <ea> in a0
-	rts
-
-#######################################################
-# Program counter indirect w/ displacement: (d16, PC) #
-#######################################################
-fpc_ind:
-	mov.l		EXC_EXTWPTR(%a6),%a0	# fetch instruction addr
-	addq.l		&0x2,EXC_EXTWPTR(%a6)	# incr instruction ptr
-	bsr.l		_imem_read_word		# fetch word displacement
-
-	tst.l		%d1			# did ifetch fail?
-	bne.l		iea_iacc		# yes
-
-	mov.w		%d0,%a0			# sign extend displacement
-
-	add.l		EXC_EXTWPTR(%a6),%a0	# pc + d16
-
-# _imem_read_word() increased the extwptr by 2. need to adjust here.
-	subq.l		&0x2,%a0		# adjust <ea>
-	rts
-
-##########################################################
-# PC indirect w/ index(8-bit displacement): (d8, PC, An) #
-# "     "     w/   "  (base displacement): (bd, PC, An)  #
-# PC memory indirect postindexed: ([bd, PC], Xn, od)     #
-# PC memory indirect preindexed: ([bd, PC, Xn], od)      #
-##########################################################
-fpc_ind_ext:
-	mov.l		EXC_EXTWPTR(%a6),%a0	# fetch instruction addr
-	addq.l		&0x2,EXC_EXTWPTR(%a6)	# incr instruction ptr
-	bsr.l		_imem_read_word		# fetch ext word
-
-	tst.l		%d1			# did ifetch fail?
-	bne.l		iea_iacc		# yes
-
-	mov.l		EXC_EXTWPTR(%a6),%a0	# put base in a0
-	subq.l		&0x2,%a0		# adjust base
-
-	btst		&0x8,%d0		# is disp only 8 bits?
-	bne.w		fcalc_mem_ind		# calc memory indirect
-
-	mov.l		%d0,L_SCR1(%a6)		# store opword
-
-	mov.l		%d0,%d1			# make extword copy
-	rol.w		&0x4,%d1		# rotate reg num into place
-	andi.w		&0xf,%d1		# extract register number
-
-# count on fetch_dreg() not to alter a0...
-	bsr.l		fetch_dreg		# fetch index
-
-	mov.l		%d2,-(%sp)		# save d2
-	mov.l		L_SCR1(%a6),%d2		# fetch opword
-
-	btst		&0xb,%d2		# is index word or long?
-	bne.b		fpii8_long		# long
-	ext.l		%d0			# sign extend word index
-fpii8_long:
-	mov.l		%d2,%d1
-	rol.w		&0x7,%d1		# rotate scale value into place
-	andi.l		&0x3,%d1		# extract scale value
-
-	lsl.l		%d1,%d0			# shift index by scale
-
-	extb.l		%d2			# sign extend displacement
-	add.l		%d2,%d0			# disp + index
-	add.l		%d0,%a0			# An + (index + disp)
-
-	mov.l		(%sp)+,%d2		# restore temp register
-	rts
-
-# d2 = index
-# d3 = base
-# d4 = od
-# d5 = extword
-fcalc_mem_ind:
-	btst		&0x6,%d0		# is the index suppressed?
-	beq.b		fcalc_index
-
-	movm.l		&0x3c00,-(%sp)		# save d2-d5
-
-	mov.l		%d0,%d5			# put extword in d5
-	mov.l		%a0,%d3			# put base in d3
-
-	clr.l		%d2			# yes, so index = 0
-	bra.b		fbase_supp_ck
-
-# index:
-fcalc_index:
-	mov.l		%d0,L_SCR1(%a6)		# save d0 (opword)
-	bfextu		%d0{&16:&4},%d1		# fetch dreg index
-	bsr.l		fetch_dreg
-
-	movm.l		&0x3c00,-(%sp)		# save d2-d5
-	mov.l		%d0,%d2			# put index in d2
-	mov.l		L_SCR1(%a6),%d5
-	mov.l		%a0,%d3
-
-	btst		&0xb,%d5		# is index word or long?
-	bne.b		fno_ext
-	ext.l		%d2
-
-fno_ext:
-	bfextu		%d5{&21:&2},%d0
-	lsl.l		%d0,%d2
-
-# base address (passed as parameter in d3):
-# we clear the value here if it should actually be suppressed.
-fbase_supp_ck:
-	btst		&0x7,%d5		# is the bd suppressed?
-	beq.b		fno_base_sup
-	clr.l		%d3
-
-# base displacement:
-fno_base_sup:
-	bfextu		%d5{&26:&2},%d0		# get bd size
-#	beq.l		fmovm_error		# if (size == 0) it's reserved
-
-	cmpi.b		%d0,&0x2
-	blt.b		fno_bd
-	beq.b		fget_word_bd
-
-	mov.l		EXC_EXTWPTR(%a6),%a0	# fetch instruction addr
-	addq.l		&0x4,EXC_EXTWPTR(%a6)	# incr instruction ptr
-	bsr.l		_imem_read_long
-
-	tst.l		%d1			# did ifetch fail?
-	bne.l		fcea_iacc		# yes
-
-	bra.b		fchk_ind
-
-fget_word_bd:
-	mov.l		EXC_EXTWPTR(%a6),%a0	# fetch instruction addr
-	addq.l		&0x2,EXC_EXTWPTR(%a6)	# incr instruction ptr
-	bsr.l		_imem_read_word
-
-	tst.l		%d1			# did ifetch fail?
-	bne.l		fcea_iacc		# yes
-
-	ext.l		%d0			# sign extend bd
-
-fchk_ind:
-	add.l		%d0,%d3			# base += bd
-
-# outer displacement:
-fno_bd:
-	bfextu		%d5{&30:&2},%d0		# is od suppressed?
-	beq.w		faii_bd
-
-	cmpi.b		%d0,&0x2
-	blt.b		fnull_od
-	beq.b		fword_od
-
-	mov.l		EXC_EXTWPTR(%a6),%a0	# fetch instruction addr
-	addq.l		&0x4,EXC_EXTWPTR(%a6)	# incr instruction ptr
-	bsr.l		_imem_read_long
-
-	tst.l		%d1			# did ifetch fail?
-	bne.l		fcea_iacc		# yes
-
-	bra.b		fadd_them
-
-fword_od:
-	mov.l		EXC_EXTWPTR(%a6),%a0	# fetch instruction addr
-	addq.l		&0x2,EXC_EXTWPTR(%a6)	# incr instruction ptr
-	bsr.l		_imem_read_word
-
-	tst.l		%d1			# did ifetch fail?
-	bne.l		fcea_iacc		# yes
-
-	ext.l		%d0			# sign extend od
-	bra.b		fadd_them
-
-fnull_od:
-	clr.l		%d0
-
-fadd_them:
-	mov.l		%d0,%d4
-
-	btst		&0x2,%d5		# pre or post indexing?
-	beq.b		fpre_indexed
-
-	mov.l		%d3,%a0
-	bsr.l		_dmem_read_long
-
-	tst.l		%d1			# did dfetch fail?
-	bne.w		fcea_err		# yes
-
-	add.l		%d2,%d0			# <ea> += index
-	add.l		%d4,%d0			# <ea> += od
-	bra.b		fdone_ea
-
-fpre_indexed:
-	add.l		%d2,%d3			# preindexing
-	mov.l		%d3,%a0
-	bsr.l		_dmem_read_long
-
-	tst.l		%d1			# did dfetch fail?
-	bne.w		fcea_err		# yes
-
-	add.l		%d4,%d0			# ea += od
-	bra.b		fdone_ea
-
-faii_bd:
-	add.l		%d2,%d3			# ea = (base + bd) + index
-	mov.l		%d3,%d0
-fdone_ea:
-	mov.l		%d0,%a0
-
-	movm.l		(%sp)+,&0x003c		# restore d2-d5
-	rts
-
-#########################################################
-fcea_err:
-	mov.l		%d3,%a0
-
-	movm.l		(%sp)+,&0x003c		# restore d2-d5
-	mov.w		&0x0101,%d0
-	bra.l		iea_dacc
-
-fcea_iacc:
-	movm.l		(%sp)+,&0x003c		# restore d2-d5
-	bra.l		iea_iacc
-
-fmovm_out_err:
-	bsr.l		restore
-	mov.w		&0x00e1,%d0
-	bra.b		fmovm_err
-
-fmovm_in_err:
-	bsr.l		restore
-	mov.w		&0x0161,%d0
-
-fmovm_err:
-	mov.l		L_SCR1(%a6),%a0
-	bra.l		iea_dacc
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	fmovm_ctrl(): emulate fmovm.l of control registers instr	#
-#									#
-# XREF ****************************************************************	#
-#	_imem_read_long() - read longword from memory			#
-#	iea_iacc() - _imem_read_long() failed; error recovery		#
-#									#
-# INPUT ***************************************************************	#
-#	None								#
-#									#
-# OUTPUT **************************************************************	#
-#	If _imem_read_long() doesn't fail:				#
-#		USER_FPCR(a6)  = new FPCR value				#
-#		USER_FPSR(a6)  = new FPSR value				#
-#		USER_FPIAR(a6) = new FPIAR value			#
-#									#
-# ALGORITHM ***********************************************************	#
-#	Decode the instruction type by looking at the extension word	#
-# in order to see how many control registers to fetch from memory.	#
-# Fetch them using _imem_read_long(). If this fetch fails, exit through	#
-# the special access error exit handler iea_iacc().			#
-#									#
-# Instruction word decoding:						#
-#									#
-#	fmovem.l #<data>, {FPIAR&|FPCR&|FPSR}				#
-#									#
-#		WORD1			WORD2				#
-#	1111 0010 00 111100	100$ $$00 0000 0000			#
-#									#
-#	$$$ (100): FPCR							#
-#	    (010): FPSR							#
-#	    (001): FPIAR						#
-#	    (000): FPIAR						#
-#									#
-#########################################################################
-
-	global		fmovm_ctrl
-fmovm_ctrl:
-	mov.b		EXC_EXTWORD(%a6),%d0	# fetch reg select bits
-	cmpi.b		%d0,&0x9c		# fpcr & fpsr & fpiar ?
-	beq.w		fctrl_in_7		# yes
-	cmpi.b		%d0,&0x98		# fpcr & fpsr ?
-	beq.w		fctrl_in_6		# yes
-	cmpi.b		%d0,&0x94		# fpcr & fpiar ?
-	beq.b		fctrl_in_5		# yes
-
-# fmovem.l #<data>, fpsr/fpiar
-fctrl_in_3:
-	mov.l		EXC_EXTWPTR(%a6),%a0	# fetch instruction addr
-	addq.l		&0x4,EXC_EXTWPTR(%a6)	# incr instruction ptr
-	bsr.l		_imem_read_long		# fetch FPSR from mem
-
-	tst.l		%d1			# did ifetch fail?
-	bne.l		iea_iacc		# yes
-
-	mov.l		%d0,USER_FPSR(%a6)	# store new FPSR to stack
-	mov.l		EXC_EXTWPTR(%a6),%a0	# fetch instruction addr
-	addq.l		&0x4,EXC_EXTWPTR(%a6)	# incr instruction ptr
-	bsr.l		_imem_read_long		# fetch FPIAR from mem
-
-	tst.l		%d1			# did ifetch fail?
-	bne.l		iea_iacc		# yes
-
-	mov.l		%d0,USER_FPIAR(%a6)	# store new FPIAR to stack
-	rts
-
-# fmovem.l #<data>, fpcr/fpiar
-fctrl_in_5:
-	mov.l		EXC_EXTWPTR(%a6),%a0	# fetch instruction addr
-	addq.l		&0x4,EXC_EXTWPTR(%a6)	# incr instruction ptr
-	bsr.l		_imem_read_long		# fetch FPCR from mem
-
-	tst.l		%d1			# did ifetch fail?
-	bne.l		iea_iacc		# yes
-
-	mov.l		%d0,USER_FPCR(%a6)	# store new FPCR to stack
-	mov.l		EXC_EXTWPTR(%a6),%a0	# fetch instruction addr
-	addq.l		&0x4,EXC_EXTWPTR(%a6)	# incr instruction ptr
-	bsr.l		_imem_read_long		# fetch FPIAR from mem
-
-	tst.l		%d1			# did ifetch fail?
-	bne.l		iea_iacc		# yes
-
-	mov.l		%d0,USER_FPIAR(%a6)	# store new FPIAR to stack
-	rts
-
-# fmovem.l #<data>, fpcr/fpsr
-fctrl_in_6:
-	mov.l		EXC_EXTWPTR(%a6),%a0	# fetch instruction addr
-	addq.l		&0x4,EXC_EXTWPTR(%a6)	# incr instruction ptr
-	bsr.l		_imem_read_long		# fetch FPCR from mem
-
-	tst.l		%d1			# did ifetch fail?
-	bne.l		iea_iacc		# yes
-
-	mov.l		%d0,USER_FPCR(%a6)	# store new FPCR to mem
-	mov.l		EXC_EXTWPTR(%a6),%a0	# fetch instruction addr
-	addq.l		&0x4,EXC_EXTWPTR(%a6)	# incr instruction ptr
-	bsr.l		_imem_read_long		# fetch FPSR from mem
-
-	tst.l		%d1			# did ifetch fail?
-	bne.l		iea_iacc		# yes
-
-	mov.l		%d0,USER_FPSR(%a6)	# store new FPSR to mem
-	rts
-
-# fmovem.l #<data>, fpcr/fpsr/fpiar
-fctrl_in_7:
-	mov.l		EXC_EXTWPTR(%a6),%a0	# fetch instruction addr
-	addq.l		&0x4,EXC_EXTWPTR(%a6)	# incr instruction ptr
-	bsr.l		_imem_read_long		# fetch FPCR from mem
-
-	tst.l		%d1			# did ifetch fail?
-	bne.l		iea_iacc		# yes
-
-	mov.l		%d0,USER_FPCR(%a6)	# store new FPCR to mem
-	mov.l		EXC_EXTWPTR(%a6),%a0	# fetch instruction addr
-	addq.l		&0x4,EXC_EXTWPTR(%a6)	# incr instruction ptr
-	bsr.l		_imem_read_long		# fetch FPSR from mem
-
-	tst.l		%d1			# did ifetch fail?
-	bne.l		iea_iacc		# yes
-
-	mov.l		%d0,USER_FPSR(%a6)	# store new FPSR to mem
-	mov.l		EXC_EXTWPTR(%a6),%a0	# fetch instruction addr
-	addq.l		&0x4,EXC_EXTWPTR(%a6)	# incr instruction ptr
-	bsr.l		_imem_read_long		# fetch FPIAR from mem
-
-	tst.l		%d1			# did ifetch fail?
-	bne.l		iea_iacc		# yes
-
-	mov.l		%d0,USER_FPIAR(%a6)	# store new FPIAR to mem
-	rts
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	_dcalc_ea(): calc correct <ea> from <ea> stacked on exception	#
-#									#
-# XREF ****************************************************************	#
-#	inc_areg() - increment an address register			#
-#	dec_areg() - decrement an address register			#
-#									#
-# INPUT ***************************************************************	#
-#	d0 = number of bytes to adjust <ea> by				#
-#									#
-# OUTPUT **************************************************************	#
-#	None								#
-#									#
-# ALGORITHM ***********************************************************	#
-# "Dummy" CALCulate Effective Address:					#
-#	The stacked <ea> for FP unimplemented instructions and opclass	#
-#	two packed instructions is correct with the exception of...	#
-#									#
-#	1) -(An)   : The register is not updated regardless of size.	#
-#		     Also, for extended precision and packed, the	#
-#		     stacked <ea> value is 8 bytes too big		#
-#	2) (An)+   : The register is not updated.			#
-#	3) #<data> : The upper longword of the immediate operand is	#
-#		     stacked b,w,l and s sizes are completely stacked.	#
-#		     d,x, and p are not.				#
-#									#
-#########################################################################
-
-	global		_dcalc_ea
-_dcalc_ea:
-	mov.l		%d0, %a0		# move # bytes to %a0
-
-	mov.b		1+EXC_OPWORD(%a6), %d0	# fetch opcode word
-	mov.l		%d0, %d1		# make a copy
-
-	andi.w		&0x38, %d0		# extract mode field
-	andi.l		&0x7, %d1		# extract reg  field
-
-	cmpi.b		%d0,&0x18		# is mode (An)+ ?
-	beq.b		dcea_pi			# yes
-
-	cmpi.b		%d0,&0x20		# is mode -(An) ?
-	beq.b		dcea_pd			# yes
-
-	or.w		%d1,%d0			# concat mode,reg
-	cmpi.b		%d0,&0x3c		# is mode #<data>?
-
-	beq.b		dcea_imm		# yes
-
-	mov.l		EXC_EA(%a6),%a0		# return <ea>
-	rts
-
-# need to set immediate data flag here since we'll need to do
-# an imem_read to fetch this later.
-dcea_imm:
-	mov.b		&immed_flg,SPCOND_FLG(%a6)
-	lea		([USER_FPIAR,%a6],0x4),%a0 # no; return <ea>
-	rts
-
-# here, the <ea> is stacked correctly. however, we must update the
-# address register...
-dcea_pi:
-	mov.l		%a0,%d0			# pass amt to inc by
-	bsr.l		inc_areg		# inc addr register
-
-	mov.l		EXC_EA(%a6),%a0		# stacked <ea> is correct
-	rts
-
-# the <ea> is stacked correctly for all but extended and packed which
-# the <ea>s are 8 bytes too large.
-# it would make no sense to have a pre-decrement to a7 in supervisor
-# mode so we don't even worry about this tricky case here : )
-dcea_pd:
-	mov.l		%a0,%d0			# pass amt to dec by
-	bsr.l		dec_areg		# dec addr register
-
-	mov.l		EXC_EA(%a6),%a0		# stacked <ea> is correct
-
-	cmpi.b		%d0,&0xc		# is opsize ext or packed?
-	beq.b		dcea_pd2		# yes
-	rts
-dcea_pd2:
-	sub.l		&0x8,%a0		# correct <ea>
-	mov.l		%a0,EXC_EA(%a6)		# put correct <ea> on stack
-	rts
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	_calc_ea_fout(): calculate correct stacked <ea> for extended	#
-#			 and packed data opclass 3 operations.		#
-#									#
-# XREF ****************************************************************	#
-#	None								#
-#									#
-# INPUT ***************************************************************	#
-#	None								#
-#									#
-# OUTPUT **************************************************************	#
-#	a0 = return correct effective address				#
-#									#
-# ALGORITHM ***********************************************************	#
-#	For opclass 3 extended and packed data operations, the <ea>	#
-# stacked for the exception is incorrect for -(an) and (an)+ addressing	#
-# modes. Also, while we're at it, the index register itself must get	#
-# updated.								#
-#	So, for -(an), we must subtract 8 off of the stacked <ea> value	#
-# and return that value as the correct <ea> and store that value in An.	#
-# For (an)+, the stacked <ea> is correct but we must adjust An by +12.	#
-#									#
-#########################################################################
-
-# This calc_ea is currently used to retrieve the correct <ea>
-# for fmove outs of type extended and packed.
-	global		_calc_ea_fout
-_calc_ea_fout:
-	mov.b		1+EXC_OPWORD(%a6),%d0	# fetch opcode word
-	mov.l		%d0,%d1			# make a copy
-
-	andi.w		&0x38,%d0		# extract mode field
-	andi.l		&0x7,%d1		# extract reg  field
-
-	cmpi.b		%d0,&0x18		# is mode (An)+ ?
-	beq.b		ceaf_pi			# yes
-
-	cmpi.b		%d0,&0x20		# is mode -(An) ?
-	beq.w		ceaf_pd			# yes
-
-	mov.l		EXC_EA(%a6),%a0		# stacked <ea> is correct
-	rts
-
-# (An)+ : extended and packed fmove out
-#	: stacked <ea> is correct
-#	: "An" not updated
-ceaf_pi:
-	mov.w		(tbl_ceaf_pi.b,%pc,%d1.w*2),%d1
-	mov.l		EXC_EA(%a6),%a0
-	jmp		(tbl_ceaf_pi.b,%pc,%d1.w*1)
-
-	swbeg		&0x8
-tbl_ceaf_pi:
-	short		ceaf_pi0 - tbl_ceaf_pi
-	short		ceaf_pi1 - tbl_ceaf_pi
-	short		ceaf_pi2 - tbl_ceaf_pi
-	short		ceaf_pi3 - tbl_ceaf_pi
-	short		ceaf_pi4 - tbl_ceaf_pi
-	short		ceaf_pi5 - tbl_ceaf_pi
-	short		ceaf_pi6 - tbl_ceaf_pi
-	short		ceaf_pi7 - tbl_ceaf_pi
-
-ceaf_pi0:
-	addi.l		&0xc,EXC_DREGS+0x8(%a6)
-	rts
-ceaf_pi1:
-	addi.l		&0xc,EXC_DREGS+0xc(%a6)
-	rts
-ceaf_pi2:
-	add.l		&0xc,%a2
-	rts
-ceaf_pi3:
-	add.l		&0xc,%a3
-	rts
-ceaf_pi4:
-	add.l		&0xc,%a4
-	rts
-ceaf_pi5:
-	add.l		&0xc,%a5
-	rts
-ceaf_pi6:
-	addi.l		&0xc,EXC_A6(%a6)
-	rts
-ceaf_pi7:
-	mov.b		&mia7_flg,SPCOND_FLG(%a6)
-	addi.l		&0xc,EXC_A7(%a6)
-	rts
-
-# -(An) : extended and packed fmove out
-#	: stacked <ea> = actual <ea> + 8
-#	: "An" not updated
-ceaf_pd:
-	mov.w		(tbl_ceaf_pd.b,%pc,%d1.w*2),%d1
-	mov.l		EXC_EA(%a6),%a0
-	sub.l		&0x8,%a0
-	sub.l		&0x8,EXC_EA(%a6)
-	jmp		(tbl_ceaf_pd.b,%pc,%d1.w*1)
-
-	swbeg		&0x8
-tbl_ceaf_pd:
-	short		ceaf_pd0 - tbl_ceaf_pd
-	short		ceaf_pd1 - tbl_ceaf_pd
-	short		ceaf_pd2 - tbl_ceaf_pd
-	short		ceaf_pd3 - tbl_ceaf_pd
-	short		ceaf_pd4 - tbl_ceaf_pd
-	short		ceaf_pd5 - tbl_ceaf_pd
-	short		ceaf_pd6 - tbl_ceaf_pd
-	short		ceaf_pd7 - tbl_ceaf_pd
-
-ceaf_pd0:
-	mov.l		%a0,EXC_DREGS+0x8(%a6)
-	rts
-ceaf_pd1:
-	mov.l		%a0,EXC_DREGS+0xc(%a6)
-	rts
-ceaf_pd2:
-	mov.l		%a0,%a2
-	rts
-ceaf_pd3:
-	mov.l		%a0,%a3
-	rts
-ceaf_pd4:
-	mov.l		%a0,%a4
-	rts
-ceaf_pd5:
-	mov.l		%a0,%a5
-	rts
-ceaf_pd6:
-	mov.l		%a0,EXC_A6(%a6)
-	rts
-ceaf_pd7:
-	mov.l		%a0,EXC_A7(%a6)
-	mov.b		&mda7_flg,SPCOND_FLG(%a6)
-	rts
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	_load_fop(): load operand for unimplemented FP exception	#
-#									#
-# XREF ****************************************************************	#
-#	set_tag_x() - determine ext prec optype tag			#
-#	set_tag_s() - determine sgl prec optype tag			#
-#	set_tag_d() - determine dbl prec optype tag			#
-#	unnorm_fix() - convert normalized number to denorm or zero	#
-#	norm() - normalize a denormalized number			#
-#	get_packed() - fetch a packed operand from memory		#
-#	_dcalc_ea() - calculate <ea>, fixing An in process		#
-#									#
-#	_imem_read_{word,long}() - read from instruction memory		#
-#	_dmem_read() - read from data memory				#
-#	_dmem_read_{byte,word,long}() - read from data memory		#
-#									#
-#	facc_in_{b,w,l,d,x}() - mem read failed; special exit point	#
-#									#
-# INPUT ***************************************************************	#
-#	None								#
-#									#
-# OUTPUT **************************************************************	#
-#	If memory access doesn't fail:					#
-#		FP_SRC(a6) = source operand in extended precision	#
-#		FP_DST(a6) = destination operand in extended precision	#
-#									#
-# ALGORITHM ***********************************************************	#
-#	This is called from the Unimplemented FP exception handler in	#
-# order to load the source and maybe destination operand into		#
-# FP_SRC(a6) and FP_DST(a6). If the instruction was opclass zero, load	#
-# the source and destination from the FP register file. Set the optype	#
-# tags for both if dyadic, one for monadic. If a number is an UNNORM,	#
-# convert it to a DENORM or a ZERO.					#
-#	If the instruction is opclass two (memory->reg), then fetch	#
-# the destination from the register file and the source operand from	#
-# memory. Tag and fix both as above w/ opclass zero instructions.	#
-#	If the source operand is byte,word,long, or single, it may be	#
-# in the data register file. If it's actually out in memory, use one of	#
-# the mem_read() routines to fetch it. If the mem_read() access returns	#
-# a failing value, exit through the special facc_in() routine which	#
-# will create an access error exception frame from the current exception #
-# frame.								#
-#	Immediate data and regular data accesses are separated because	#
-# if an immediate data access fails, the resulting fault status		#
-# longword stacked for the access error exception must have the		#
-# instruction bit set.							#
-#									#
-#########################################################################
-
-	global		_load_fop
-_load_fop:
-
-#  15     13 12 10  9 7  6       0
-# /        \ /   \ /  \ /         \
-# ---------------------------------
-# | opclass | RX  | RY | EXTENSION |  (2nd word of general FP instruction)
-# ---------------------------------
-#
-
-#	bfextu		EXC_CMDREG(%a6){&0:&3}, %d0 # extract opclass
-#	cmpi.b		%d0, &0x2		# which class is it? ('000,'010,'011)
-#	beq.w		op010			# handle <ea> -> fpn
-#	bgt.w		op011			# handle fpn -> <ea>
-
-# we're not using op011 for now...
-	btst		&0x6,EXC_CMDREG(%a6)
-	bne.b		op010
-
-############################
-# OPCLASS '000: reg -> reg #
-############################
-op000:
-	mov.b		1+EXC_CMDREG(%a6),%d0	# fetch extension word lo
-	btst		&0x5,%d0		# testing extension bits
-	beq.b		op000_src		# (bit 5 == 0) => monadic
-	btst		&0x4,%d0		# (bit 5 == 1)
-	beq.b		op000_dst		# (bit 4 == 0) => dyadic
-	and.w		&0x007f,%d0		# extract extension bits {6:0}
-	cmpi.w		%d0,&0x0038		# is it an fcmp (dyadic) ?
-	bne.b		op000_src		# it's an fcmp
-
-op000_dst:
-	bfextu		EXC_CMDREG(%a6){&6:&3}, %d0 # extract dst field
-	bsr.l		load_fpn2		# fetch dst fpreg into FP_DST
-
-	bsr.l		set_tag_x		# get dst optype tag
-
-	cmpi.b		%d0, &UNNORM		# is dst fpreg an UNNORM?
-	beq.b		op000_dst_unnorm	# yes
-op000_dst_cont:
-	mov.b		%d0, DTAG(%a6)		# store the dst optype tag
-
-op000_src:
-	bfextu		EXC_CMDREG(%a6){&3:&3}, %d0 # extract src field
-	bsr.l		load_fpn1		# fetch src fpreg into FP_SRC
-
-	bsr.l		set_tag_x		# get src optype tag
-
-	cmpi.b		%d0, &UNNORM		# is src fpreg an UNNORM?
-	beq.b		op000_src_unnorm	# yes
-op000_src_cont:
-	mov.b		%d0, STAG(%a6)		# store the src optype tag
-	rts
-
-op000_dst_unnorm:
-	bsr.l		unnorm_fix		# fix the dst UNNORM
-	bra.b		op000_dst_cont
-op000_src_unnorm:
-	bsr.l		unnorm_fix		# fix the src UNNORM
-	bra.b		op000_src_cont
-
-#############################
-# OPCLASS '010: <ea> -> reg #
-#############################
-op010:
-	mov.w		EXC_CMDREG(%a6),%d0	# fetch extension word
-	btst		&0x5,%d0		# testing extension bits
-	beq.b		op010_src		# (bit 5 == 0) => monadic
-	btst		&0x4,%d0		# (bit 5 == 1)
-	beq.b		op010_dst		# (bit 4 == 0) => dyadic
-	and.w		&0x007f,%d0		# extract extension bits {6:0}
-	cmpi.w		%d0,&0x0038		# is it an fcmp (dyadic) ?
-	bne.b		op010_src		# it's an fcmp
-
-op010_dst:
-	bfextu		EXC_CMDREG(%a6){&6:&3}, %d0 # extract dst field
-	bsr.l		load_fpn2		# fetch dst fpreg ptr
-
-	bsr.l		set_tag_x		# get dst type tag
-
-	cmpi.b		%d0, &UNNORM		# is dst fpreg an UNNORM?
-	beq.b		op010_dst_unnorm	# yes
-op010_dst_cont:
-	mov.b		%d0, DTAG(%a6)		# store the dst optype tag
-
-op010_src:
-	bfextu		EXC_CMDREG(%a6){&3:&3}, %d0 # extract src type field
-
-	bfextu		EXC_OPWORD(%a6){&10:&3}, %d1 # extract <ea> mode field
-	bne.w		fetch_from_mem		# src op is in memory
-
-op010_dreg:
-	clr.b		STAG(%a6)		# either NORM or ZERO
-	bfextu		EXC_OPWORD(%a6){&13:&3}, %d1 # extract src reg field
-
-	mov.w		(tbl_op010_dreg.b,%pc,%d0.w*2), %d0 # jmp based on optype
-	jmp		(tbl_op010_dreg.b,%pc,%d0.w*1) # fetch src from dreg
-
-op010_dst_unnorm:
-	bsr.l		unnorm_fix		# fix the dst UNNORM
-	bra.b		op010_dst_cont
-
-	swbeg		&0x8
-tbl_op010_dreg:
-	short		opd_long	- tbl_op010_dreg
-	short		opd_sgl		- tbl_op010_dreg
-	short		tbl_op010_dreg	- tbl_op010_dreg
-	short		tbl_op010_dreg	- tbl_op010_dreg
-	short		opd_word	- tbl_op010_dreg
-	short		tbl_op010_dreg	- tbl_op010_dreg
-	short		opd_byte	- tbl_op010_dreg
-	short		tbl_op010_dreg	- tbl_op010_dreg
-
-#
-# LONG: can be either NORM or ZERO...
-#
-opd_long:
-	bsr.l		fetch_dreg		# fetch long in d0
-	fmov.l		%d0, %fp0		# load a long
-	fmovm.x		&0x80, FP_SRC(%a6)	# return src op in FP_SRC
-	fbeq.w		opd_long_zero		# long is a ZERO
-	rts
-opd_long_zero:
-	mov.b		&ZERO, STAG(%a6)	# set ZERO optype flag
-	rts
-
-#
-# WORD: can be either NORM or ZERO...
-#
-opd_word:
-	bsr.l		fetch_dreg		# fetch word in d0
-	fmov.w		%d0, %fp0		# load a word
-	fmovm.x		&0x80, FP_SRC(%a6)	# return src op in FP_SRC
-	fbeq.w		opd_word_zero		# WORD is a ZERO
-	rts
-opd_word_zero:
-	mov.b		&ZERO, STAG(%a6)	# set ZERO optype flag
-	rts
-
-#
-# BYTE: can be either NORM or ZERO...
-#
-opd_byte:
-	bsr.l		fetch_dreg		# fetch word in d0
-	fmov.b		%d0, %fp0		# load a byte
-	fmovm.x		&0x80, FP_SRC(%a6)	# return src op in FP_SRC
-	fbeq.w		opd_byte_zero		# byte is a ZERO
-	rts
-opd_byte_zero:
-	mov.b		&ZERO, STAG(%a6)	# set ZERO optype flag
-	rts
-
-#
-# SGL: can be either NORM, DENORM, ZERO, INF, QNAN or SNAN but not UNNORM
-#
-# separate SNANs and DENORMs so they can be loaded w/ special care.
-# all others can simply be moved "in" using fmove.
-#
-opd_sgl:
-	bsr.l		fetch_dreg		# fetch sgl in d0
-	mov.l		%d0,L_SCR1(%a6)
-
-	lea		L_SCR1(%a6), %a0	# pass: ptr to the sgl
-	bsr.l		set_tag_s		# determine sgl type
-	mov.b		%d0, STAG(%a6)		# save the src tag
-
-	cmpi.b		%d0, &SNAN		# is it an SNAN?
-	beq.w		get_sgl_snan		# yes
-
-	cmpi.b		%d0, &DENORM		# is it a DENORM?
-	beq.w		get_sgl_denorm		# yes
-
-	fmov.s		(%a0), %fp0		# no, so can load it regular
-	fmovm.x		&0x80, FP_SRC(%a6)	# return src op in FP_SRC
-	rts
-
-##############################################################################
-
-#########################################################################
-# fetch_from_mem():							#
-# - src is out in memory. must:						#
-#	(1) calc ea - must read AFTER you know the src type since	#
-#		      if the ea is -() or ()+, need to know # of bytes.	#
-#	(2) read it in from either user or supervisor space		#
-#	(3) if (b || w || l) then simply read in			#
-#	    if (s || d || x) then check for SNAN,UNNORM,DENORM		#
-#	    if (packed) then punt for now				#
-# INPUT:								#
-#	%d0 : src type field						#
-#########################################################################
-fetch_from_mem:
-	clr.b		STAG(%a6)		# either NORM or ZERO
-
-	mov.w		(tbl_fp_type.b,%pc,%d0.w*2), %d0 # index by src type field
-	jmp		(tbl_fp_type.b,%pc,%d0.w*1)
-
-	swbeg		&0x8
-tbl_fp_type:
-	short		load_long	- tbl_fp_type
-	short		load_sgl	- tbl_fp_type
-	short		load_ext	- tbl_fp_type
-	short		load_packed	- tbl_fp_type
-	short		load_word	- tbl_fp_type
-	short		load_dbl	- tbl_fp_type
-	short		load_byte	- tbl_fp_type
-	short		tbl_fp_type	- tbl_fp_type
-
-#########################################
-# load a LONG into %fp0:		#
-#	-number can't fault		#
-#	(1) calc ea			#
-#	(2) read 4 bytes into L_SCR1	#
-#	(3) fmov.l into %fp0		#
-#########################################
-load_long:
-	movq.l		&0x4, %d0		# pass: 4 (bytes)
-	bsr.l		_dcalc_ea		# calc <ea>; <ea> in %a0
-
-	cmpi.b		SPCOND_FLG(%a6),&immed_flg
-	beq.b		load_long_immed
-
-	bsr.l		_dmem_read_long		# fetch src operand from memory
-
-	tst.l		%d1			# did dfetch fail?
-	bne.l		facc_in_l		# yes
-
-load_long_cont:
-	fmov.l		%d0, %fp0		# read into %fp0;convert to xprec
-	fmovm.x		&0x80, FP_SRC(%a6)	# return src op in FP_SRC
-
-	fbeq.w		load_long_zero		# src op is a ZERO
-	rts
-load_long_zero:
-	mov.b		&ZERO, STAG(%a6)	# set optype tag to ZERO
-	rts
-
-load_long_immed:
-	bsr.l		_imem_read_long		# fetch src operand immed data
-
-	tst.l		%d1			# did ifetch fail?
-	bne.l		funimp_iacc		# yes
-	bra.b		load_long_cont
-
-#########################################
-# load a WORD into %fp0:		#
-#	-number can't fault		#
-#	(1) calc ea			#
-#	(2) read 2 bytes into L_SCR1	#
-#	(3) fmov.w into %fp0		#
-#########################################
-load_word:
-	movq.l		&0x2, %d0		# pass: 2 (bytes)
-	bsr.l		_dcalc_ea		# calc <ea>; <ea> in %a0
-
-	cmpi.b		SPCOND_FLG(%a6),&immed_flg
-	beq.b		load_word_immed
-
-	bsr.l		_dmem_read_word		# fetch src operand from memory
-
-	tst.l		%d1			# did dfetch fail?
-	bne.l		facc_in_w		# yes
-
-load_word_cont:
-	fmov.w		%d0, %fp0		# read into %fp0;convert to xprec
-	fmovm.x		&0x80, FP_SRC(%a6)	# return src op in FP_SRC
-
-	fbeq.w		load_word_zero		# src op is a ZERO
-	rts
-load_word_zero:
-	mov.b		&ZERO, STAG(%a6)	# set optype tag to ZERO
-	rts
-
-load_word_immed:
-	bsr.l		_imem_read_word		# fetch src operand immed data
-
-	tst.l		%d1			# did ifetch fail?
-	bne.l		funimp_iacc		# yes
-	bra.b		load_word_cont
-
-#########################################
-# load a BYTE into %fp0:		#
-#	-number can't fault		#
-#	(1) calc ea			#
-#	(2) read 1 byte into L_SCR1	#
-#	(3) fmov.b into %fp0		#
-#########################################
-load_byte:
-	movq.l		&0x1, %d0		# pass: 1 (byte)
-	bsr.l		_dcalc_ea		# calc <ea>; <ea> in %a0
-
-	cmpi.b		SPCOND_FLG(%a6),&immed_flg
-	beq.b		load_byte_immed
-
-	bsr.l		_dmem_read_byte		# fetch src operand from memory
-
-	tst.l		%d1			# did dfetch fail?
-	bne.l		facc_in_b		# yes
-
-load_byte_cont:
-	fmov.b		%d0, %fp0		# read into %fp0;convert to xprec
-	fmovm.x		&0x80, FP_SRC(%a6)	# return src op in FP_SRC
-
-	fbeq.w		load_byte_zero		# src op is a ZERO
-	rts
-load_byte_zero:
-	mov.b		&ZERO, STAG(%a6)	# set optype tag to ZERO
-	rts
-
-load_byte_immed:
-	bsr.l		_imem_read_word		# fetch src operand immed data
-
-	tst.l		%d1			# did ifetch fail?
-	bne.l		funimp_iacc		# yes
-	bra.b		load_byte_cont
-
-#########################################
-# load a SGL into %fp0:			#
-#	-number can't fault		#
-#	(1) calc ea			#
-#	(2) read 4 bytes into L_SCR1	#
-#	(3) fmov.s into %fp0		#
-#########################################
-load_sgl:
-	movq.l		&0x4, %d0		# pass: 4 (bytes)
-	bsr.l		_dcalc_ea		# calc <ea>; <ea> in %a0
-
-	cmpi.b		SPCOND_FLG(%a6),&immed_flg
-	beq.b		load_sgl_immed
-
-	bsr.l		_dmem_read_long		# fetch src operand from memory
-	mov.l		%d0, L_SCR1(%a6)	# store src op on stack
-
-	tst.l		%d1			# did dfetch fail?
-	bne.l		facc_in_l		# yes
-
-load_sgl_cont:
-	lea		L_SCR1(%a6), %a0	# pass: ptr to sgl src op
-	bsr.l		set_tag_s		# determine src type tag
-	mov.b		%d0, STAG(%a6)		# save src optype tag on stack
-
-	cmpi.b		%d0, &DENORM		# is it a sgl DENORM?
-	beq.w		get_sgl_denorm		# yes
-
-	cmpi.b		%d0, &SNAN		# is it a sgl SNAN?
-	beq.w		get_sgl_snan		# yes
-
-	fmov.s		L_SCR1(%a6), %fp0	# read into %fp0;convert to xprec
-	fmovm.x		&0x80, FP_SRC(%a6)	# return src op in FP_SRC
-	rts
-
-load_sgl_immed:
-	bsr.l		_imem_read_long		# fetch src operand immed data
-
-	tst.l		%d1			# did ifetch fail?
-	bne.l		funimp_iacc		# yes
-	bra.b		load_sgl_cont
-
-# must convert sgl denorm format to an Xprec denorm fmt suitable for
-# normalization...
-# %a0 : points to sgl denorm
-get_sgl_denorm:
-	clr.w		FP_SRC_EX(%a6)
-	bfextu		(%a0){&9:&23}, %d0	# fetch sgl hi(_mantissa)
-	lsl.l		&0x8, %d0
-	mov.l		%d0, FP_SRC_HI(%a6)	# set ext hi(_mantissa)
-	clr.l		FP_SRC_LO(%a6)		# set ext lo(_mantissa)
-
-	clr.w		FP_SRC_EX(%a6)
-	btst		&0x7, (%a0)		# is sgn bit set?
-	beq.b		sgl_dnrm_norm
-	bset		&0x7, FP_SRC_EX(%a6)	# set sgn of xprec value
-
-sgl_dnrm_norm:
-	lea		FP_SRC(%a6), %a0
-	bsr.l		norm			# normalize number
-	mov.w		&0x3f81, %d1		# xprec exp = 0x3f81
-	sub.w		%d0, %d1		# exp = 0x3f81 - shft amt.
-	or.w		%d1, FP_SRC_EX(%a6)	# {sgn,exp}
-
-	mov.b		&NORM, STAG(%a6)	# fix src type tag
-	rts
-
-# convert sgl to ext SNAN
-# %a0 : points to sgl SNAN
-get_sgl_snan:
-	mov.w		&0x7fff, FP_SRC_EX(%a6) # set exp of SNAN
-	bfextu		(%a0){&9:&23}, %d0
-	lsl.l		&0x8, %d0		# extract and insert hi(man)
-	mov.l		%d0, FP_SRC_HI(%a6)
-	clr.l		FP_SRC_LO(%a6)
-
-	btst		&0x7, (%a0)		# see if sign of SNAN is set
-	beq.b		no_sgl_snan_sgn
-	bset		&0x7, FP_SRC_EX(%a6)
-no_sgl_snan_sgn:
-	rts
-
-#########################################
-# load a DBL into %fp0:			#
-#	-number can't fault		#
-#	(1) calc ea			#
-#	(2) read 8 bytes into L_SCR(1,2)#
-#	(3) fmov.d into %fp0		#
-#########################################
-load_dbl:
-	movq.l		&0x8, %d0		# pass: 8 (bytes)
-	bsr.l		_dcalc_ea		# calc <ea>; <ea> in %a0
-
-	cmpi.b		SPCOND_FLG(%a6),&immed_flg
-	beq.b		load_dbl_immed
-
-	lea		L_SCR1(%a6), %a1	# pass: ptr to input dbl tmp space
-	movq.l		&0x8, %d0		# pass: # bytes to read
-	bsr.l		_dmem_read		# fetch src operand from memory
-
-	tst.l		%d1			# did dfetch fail?
-	bne.l		facc_in_d		# yes
-
-load_dbl_cont:
-	lea		L_SCR1(%a6), %a0	# pass: ptr to input dbl
-	bsr.l		set_tag_d		# determine src type tag
-	mov.b		%d0, STAG(%a6)		# set src optype tag
-
-	cmpi.b		%d0, &DENORM		# is it a dbl DENORM?
-	beq.w		get_dbl_denorm		# yes
-
-	cmpi.b		%d0, &SNAN		# is it a dbl SNAN?
-	beq.w		get_dbl_snan		# yes
-
-	fmov.d		L_SCR1(%a6), %fp0	# read into %fp0;convert to xprec
-	fmovm.x		&0x80, FP_SRC(%a6)	# return src op in FP_SRC
-	rts
-
-load_dbl_immed:
-	lea		L_SCR1(%a6), %a1	# pass: ptr to input dbl tmp space
-	movq.l		&0x8, %d0		# pass: # bytes to read
-	bsr.l		_imem_read		# fetch src operand from memory
-
-	tst.l		%d1			# did ifetch fail?
-	bne.l		funimp_iacc		# yes
-	bra.b		load_dbl_cont
-
-# must convert dbl denorm format to an Xprec denorm fmt suitable for
-# normalization...
-# %a0 : loc. of dbl denorm
-get_dbl_denorm:
-	clr.w		FP_SRC_EX(%a6)
-	bfextu		(%a0){&12:&31}, %d0	# fetch hi(_mantissa)
-	mov.l		%d0, FP_SRC_HI(%a6)
-	bfextu		4(%a0){&11:&21}, %d0	# fetch lo(_mantissa)
-	mov.l		&0xb, %d1
-	lsl.l		%d1, %d0
-	mov.l		%d0, FP_SRC_LO(%a6)
-
-	btst		&0x7, (%a0)		# is sgn bit set?
-	beq.b		dbl_dnrm_norm
-	bset		&0x7, FP_SRC_EX(%a6)	# set sgn of xprec value
-
-dbl_dnrm_norm:
-	lea		FP_SRC(%a6), %a0
-	bsr.l		norm			# normalize number
-	mov.w		&0x3c01, %d1		# xprec exp = 0x3c01
-	sub.w		%d0, %d1		# exp = 0x3c01 - shft amt.
-	or.w		%d1, FP_SRC_EX(%a6)	# {sgn,exp}
-
-	mov.b		&NORM, STAG(%a6)	# fix src type tag
-	rts
-
-# convert dbl to ext SNAN
-# %a0 : points to dbl SNAN
-get_dbl_snan:
-	mov.w		&0x7fff, FP_SRC_EX(%a6) # set exp of SNAN
-
-	bfextu		(%a0){&12:&31}, %d0	# fetch hi(_mantissa)
-	mov.l		%d0, FP_SRC_HI(%a6)
-	bfextu		4(%a0){&11:&21}, %d0	# fetch lo(_mantissa)
-	mov.l		&0xb, %d1
-	lsl.l		%d1, %d0
-	mov.l		%d0, FP_SRC_LO(%a6)
-
-	btst		&0x7, (%a0)		# see if sign of SNAN is set
-	beq.b		no_dbl_snan_sgn
-	bset		&0x7, FP_SRC_EX(%a6)
-no_dbl_snan_sgn:
-	rts
-
-#################################################
-# load a Xprec into %fp0:			#
-#	-number can't fault			#
-#	(1) calc ea				#
-#	(2) read 12 bytes into L_SCR(1,2)	#
-#	(3) fmov.x into %fp0			#
-#################################################
-load_ext:
-	mov.l		&0xc, %d0		# pass: 12 (bytes)
-	bsr.l		_dcalc_ea		# calc <ea>
-
-	lea		FP_SRC(%a6), %a1	# pass: ptr to input ext tmp space
-	mov.l		&0xc, %d0		# pass: # of bytes to read
-	bsr.l		_dmem_read		# fetch src operand from memory
-
-	tst.l		%d1			# did dfetch fail?
-	bne.l		facc_in_x		# yes
-
-	lea		FP_SRC(%a6), %a0	# pass: ptr to src op
-	bsr.l		set_tag_x		# determine src type tag
-
-	cmpi.b		%d0, &UNNORM		# is the src op an UNNORM?
-	beq.b		load_ext_unnorm		# yes
-
-	mov.b		%d0, STAG(%a6)		# store the src optype tag
-	rts
-
-load_ext_unnorm:
-	bsr.l		unnorm_fix		# fix the src UNNORM
-	mov.b		%d0, STAG(%a6)		# store the src optype tag
-	rts
-
-#################################################
-# load a packed into %fp0:			#
-#	-number can't fault			#
-#	(1) calc ea				#
-#	(2) read 12 bytes into L_SCR(1,2,3)	#
-#	(3) fmov.x into %fp0			#
-#################################################
-load_packed:
-	bsr.l		get_packed
-
-	lea		FP_SRC(%a6),%a0		# pass ptr to src op
-	bsr.l		set_tag_x		# determine src type tag
-	cmpi.b		%d0,&UNNORM		# is the src op an UNNORM ZERO?
-	beq.b		load_packed_unnorm	# yes
-
-	mov.b		%d0,STAG(%a6)		# store the src optype tag
-	rts
-
-load_packed_unnorm:
-	bsr.l		unnorm_fix		# fix the UNNORM ZERO
-	mov.b		%d0,STAG(%a6)		# store the src optype tag
-	rts
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	fout(): move from fp register to memory or data register	#
-#									#
-# XREF ****************************************************************	#
-#	_round() - needed to create EXOP for sgl/dbl precision		#
-#	norm() - needed to create EXOP for extended precision		#
-#	ovf_res() - create default overflow result for sgl/dbl precision#
-#	unf_res() - create default underflow result for sgl/dbl prec.	#
-#	dst_dbl() - create rounded dbl precision result.		#
-#	dst_sgl() - create rounded sgl precision result.		#
-#	fetch_dreg() - fetch dynamic k-factor reg for packed.		#
-#	bindec() - convert FP binary number to packed number.		#
-#	_mem_write() - write data to memory.				#
-#	_mem_write2() - write data to memory unless supv mode -(a7) exc.#
-#	_dmem_write_{byte,word,long}() - write data to memory.		#
-#	store_dreg_{b,w,l}() - store data to data register file.	#
-#	facc_out_{b,w,l,d,x}() - data access error occurred.		#
-#									#
-# INPUT ***************************************************************	#
-#	a0 = pointer to extended precision source operand		#
-#	d0 = round prec,mode						#
-#									#
-# OUTPUT **************************************************************	#
-#	fp0 : intermediate underflow or overflow result if		#
-#	      OVFL/UNFL occurred for a sgl or dbl operand		#
-#									#
-# ALGORITHM ***********************************************************	#
-#	This routine is accessed by many handlers that need to do an	#
-# opclass three move of an operand out to memory.			#
-#	Decode an fmove out (opclass 3) instruction to determine if	#
-# it's b,w,l,s,d,x, or p in size. b,w,l can be stored to either a data	#
-# register or memory. The algorithm uses a standard "fmove" to create	#
-# the rounded result. Also, since exceptions are disabled, this also	#
-# create the correct OPERR default result if appropriate.		#
-#	For sgl or dbl precision, overflow or underflow can occur. If	#
-# either occurs and is enabled, the EXOP.				#
-#	For extended precision, the stacked <ea> must be fixed along	#
-# w/ the address index register as appropriate w/ _calc_ea_fout(). If	#
-# the source is a denorm and if underflow is enabled, an EXOP must be	#
-# created.								#
-#	For packed, the k-factor must be fetched from the instruction	#
-# word or a data register. The <ea> must be fixed as w/ extended	#
-# precision. Then, bindec() is called to create the appropriate		#
-# packed result.							#
-#	If at any time an access error is flagged by one of the move-	#
-# to-memory routines, then a special exit must be made so that the	#
-# access error can be handled properly.					#
-#									#
-#########################################################################
-
-	global		fout
-fout:
-	bfextu		EXC_CMDREG(%a6){&3:&3},%d1 # extract dst fmt
-	mov.w		(tbl_fout.b,%pc,%d1.w*2),%a1 # use as index
-	jmp		(tbl_fout.b,%pc,%a1)	# jump to routine
-
-	swbeg		&0x8
-tbl_fout:
-	short		fout_long	-	tbl_fout
-	short		fout_sgl	-	tbl_fout
-	short		fout_ext	-	tbl_fout
-	short		fout_pack	-	tbl_fout
-	short		fout_word	-	tbl_fout
-	short		fout_dbl	-	tbl_fout
-	short		fout_byte	-	tbl_fout
-	short		fout_pack	-	tbl_fout
-
-#################################################################
-# fmove.b out ###################################################
-#################################################################
-
-# Only "Unimplemented Data Type" exceptions enter here. The operand
-# is either a DENORM or a NORM.
-fout_byte:
-	tst.b		STAG(%a6)		# is operand normalized?
-	bne.b		fout_byte_denorm	# no
-
-	fmovm.x		SRC(%a0),&0x80		# load value
-
-fout_byte_norm:
-	fmov.l		%d0,%fpcr		# insert rnd prec,mode
-
-	fmov.b		%fp0,%d0		# exec move out w/ correct rnd mode
-
-	fmov.l		&0x0,%fpcr		# clear FPCR
-	fmov.l		%fpsr,%d1		# fetch FPSR
-	or.w		%d1,2+USER_FPSR(%a6)	# save new exc,accrued bits
-
-	mov.b		1+EXC_OPWORD(%a6),%d1	# extract dst mode
-	andi.b		&0x38,%d1		# is mode == 0? (Dreg dst)
-	beq.b		fout_byte_dn		# must save to integer regfile
-
-	mov.l		EXC_EA(%a6),%a0		# stacked <ea> is correct
-	bsr.l		_dmem_write_byte	# write byte
-
-	tst.l		%d1			# did dstore fail?
-	bne.l		facc_out_b		# yes
-
-	rts
-
-fout_byte_dn:
-	mov.b		1+EXC_OPWORD(%a6),%d1	# extract Dn
-	andi.w		&0x7,%d1
-	bsr.l		store_dreg_b
-	rts
-
-fout_byte_denorm:
-	mov.l		SRC_EX(%a0),%d1
-	andi.l		&0x80000000,%d1		# keep DENORM sign
-	ori.l		&0x00800000,%d1		# make smallest sgl
-	fmov.s		%d1,%fp0
-	bra.b		fout_byte_norm
-
-#################################################################
-# fmove.w out ###################################################
-#################################################################
-
-# Only "Unimplemented Data Type" exceptions enter here. The operand
-# is either a DENORM or a NORM.
-fout_word:
-	tst.b		STAG(%a6)		# is operand normalized?
-	bne.b		fout_word_denorm	# no
-
-	fmovm.x		SRC(%a0),&0x80		# load value
-
-fout_word_norm:
-	fmov.l		%d0,%fpcr		# insert rnd prec:mode
-
-	fmov.w		%fp0,%d0		# exec move out w/ correct rnd mode
-
-	fmov.l		&0x0,%fpcr		# clear FPCR
-	fmov.l		%fpsr,%d1		# fetch FPSR
-	or.w		%d1,2+USER_FPSR(%a6)	# save new exc,accrued bits
-
-	mov.b		1+EXC_OPWORD(%a6),%d1	# extract dst mode
-	andi.b		&0x38,%d1		# is mode == 0? (Dreg dst)
-	beq.b		fout_word_dn		# must save to integer regfile
-
-	mov.l		EXC_EA(%a6),%a0		# stacked <ea> is correct
-	bsr.l		_dmem_write_word	# write word
-
-	tst.l		%d1			# did dstore fail?
-	bne.l		facc_out_w		# yes
-
-	rts
-
-fout_word_dn:
-	mov.b		1+EXC_OPWORD(%a6),%d1	# extract Dn
-	andi.w		&0x7,%d1
-	bsr.l		store_dreg_w
-	rts
-
-fout_word_denorm:
-	mov.l		SRC_EX(%a0),%d1
-	andi.l		&0x80000000,%d1		# keep DENORM sign
-	ori.l		&0x00800000,%d1		# make smallest sgl
-	fmov.s		%d1,%fp0
-	bra.b		fout_word_norm
-
-#################################################################
-# fmove.l out ###################################################
-#################################################################
-
-# Only "Unimplemented Data Type" exceptions enter here. The operand
-# is either a DENORM or a NORM.
-fout_long:
-	tst.b		STAG(%a6)		# is operand normalized?
-	bne.b		fout_long_denorm	# no
-
-	fmovm.x		SRC(%a0),&0x80		# load value
-
-fout_long_norm:
-	fmov.l		%d0,%fpcr		# insert rnd prec:mode
-
-	fmov.l		%fp0,%d0		# exec move out w/ correct rnd mode
-
-	fmov.l		&0x0,%fpcr		# clear FPCR
-	fmov.l		%fpsr,%d1		# fetch FPSR
-	or.w		%d1,2+USER_FPSR(%a6)	# save new exc,accrued bits
-
-fout_long_write:
-	mov.b		1+EXC_OPWORD(%a6),%d1	# extract dst mode
-	andi.b		&0x38,%d1		# is mode == 0? (Dreg dst)
-	beq.b		fout_long_dn		# must save to integer regfile
-
-	mov.l		EXC_EA(%a6),%a0		# stacked <ea> is correct
-	bsr.l		_dmem_write_long	# write long
-
-	tst.l		%d1			# did dstore fail?
-	bne.l		facc_out_l		# yes
-
-	rts
-
-fout_long_dn:
-	mov.b		1+EXC_OPWORD(%a6),%d1	# extract Dn
-	andi.w		&0x7,%d1
-	bsr.l		store_dreg_l
-	rts
-
-fout_long_denorm:
-	mov.l		SRC_EX(%a0),%d1
-	andi.l		&0x80000000,%d1		# keep DENORM sign
-	ori.l		&0x00800000,%d1		# make smallest sgl
-	fmov.s		%d1,%fp0
-	bra.b		fout_long_norm
-
-#################################################################
-# fmove.x out ###################################################
-#################################################################
-
-# Only "Unimplemented Data Type" exceptions enter here. The operand
-# is either a DENORM or a NORM.
-# The DENORM causes an Underflow exception.
-fout_ext:
-
-# we copy the extended precision result to FP_SCR0 so that the reserved
-# 16-bit field gets zeroed. we do this since we promise not to disturb
-# what's at SRC(a0).
-	mov.w		SRC_EX(%a0),FP_SCR0_EX(%a6)
-	clr.w		2+FP_SCR0_EX(%a6)	# clear reserved field
-	mov.l		SRC_HI(%a0),FP_SCR0_HI(%a6)
-	mov.l		SRC_LO(%a0),FP_SCR0_LO(%a6)
-
-	fmovm.x		SRC(%a0),&0x80		# return result
-
-	bsr.l		_calc_ea_fout		# fix stacked <ea>
-
-	mov.l		%a0,%a1			# pass: dst addr
-	lea		FP_SCR0(%a6),%a0	# pass: src addr
-	mov.l		&0xc,%d0		# pass: opsize is 12 bytes
-
-# we must not yet write the extended precision data to the stack
-# in the pre-decrement case from supervisor mode or else we'll corrupt
-# the stack frame. so, leave it in FP_SRC for now and deal with it later...
-	cmpi.b		SPCOND_FLG(%a6),&mda7_flg
-	beq.b		fout_ext_a7
-
-	bsr.l		_dmem_write		# write ext prec number to memory
-
-	tst.l		%d1			# did dstore fail?
-	bne.w		fout_ext_err		# yes
-
-	tst.b		STAG(%a6)		# is operand normalized?
-	bne.b		fout_ext_denorm		# no
-	rts
-
-# the number is a DENORM. must set the underflow exception bit
-fout_ext_denorm:
-	bset		&unfl_bit,FPSR_EXCEPT(%a6) # set underflow exc bit
-
-	mov.b		FPCR_ENABLE(%a6),%d0
-	andi.b		&0x0a,%d0		# is UNFL or INEX enabled?
-	bne.b		fout_ext_exc		# yes
-	rts
-
-# we don't want to do the write if the exception occurred in supervisor mode
-# so _mem_write2() handles this for us.
-fout_ext_a7:
-	bsr.l		_mem_write2		# write ext prec number to memory
-
-	tst.l		%d1			# did dstore fail?
-	bne.w		fout_ext_err		# yes
-
-	tst.b		STAG(%a6)		# is operand normalized?
-	bne.b		fout_ext_denorm		# no
-	rts
-
-fout_ext_exc:
-	lea		FP_SCR0(%a6),%a0
-	bsr.l		norm			# normalize the mantissa
-	neg.w		%d0			# new exp = -(shft amt)
-	andi.w		&0x7fff,%d0
-	andi.w		&0x8000,FP_SCR0_EX(%a6)	# keep only old sign
-	or.w		%d0,FP_SCR0_EX(%a6)	# insert new exponent
-	fmovm.x		FP_SCR0(%a6),&0x40	# return EXOP in fp1
-	rts
-
-fout_ext_err:
-	mov.l		EXC_A6(%a6),(%a6)	# fix stacked a6
-	bra.l		facc_out_x
-
-#########################################################################
-# fmove.s out ###########################################################
-#########################################################################
-fout_sgl:
-	andi.b		&0x30,%d0		# clear rnd prec
-	ori.b		&s_mode*0x10,%d0	# insert sgl prec
-	mov.l		%d0,L_SCR3(%a6)		# save rnd prec,mode on stack
-
-#
-# operand is a normalized number. first, we check to see if the move out
-# would cause either an underflow or overflow. these cases are handled
-# separately. otherwise, set the FPCR to the proper rounding mode and
-# execute the move.
-#
-	mov.w		SRC_EX(%a0),%d0		# extract exponent
-	andi.w		&0x7fff,%d0		# strip sign
-
-	cmpi.w		%d0,&SGL_HI		# will operand overflow?
-	bgt.w		fout_sgl_ovfl		# yes; go handle OVFL
-	beq.w		fout_sgl_may_ovfl	# maybe; go handle possible OVFL
-	cmpi.w		%d0,&SGL_LO		# will operand underflow?
-	blt.w		fout_sgl_unfl		# yes; go handle underflow
-
-#
-# NORMs(in range) can be stored out by a simple "fmov.s"
-# Unnormalized inputs can come through this point.
-#
-fout_sgl_exg:
-	fmovm.x		SRC(%a0),&0x80		# fetch fop from stack
-
-	fmov.l		L_SCR3(%a6),%fpcr	# set FPCR
-	fmov.l		&0x0,%fpsr		# clear FPSR
-
-	fmov.s		%fp0,%d0		# store does convert and round
-
-	fmov.l		&0x0,%fpcr		# clear FPCR
-	fmov.l		%fpsr,%d1		# save FPSR
-
-	or.w		%d1,2+USER_FPSR(%a6)	# set possible inex2/ainex
-
-fout_sgl_exg_write:
-	mov.b		1+EXC_OPWORD(%a6),%d1	# extract dst mode
-	andi.b		&0x38,%d1		# is mode == 0? (Dreg dst)
-	beq.b		fout_sgl_exg_write_dn	# must save to integer regfile
-
-	mov.l		EXC_EA(%a6),%a0		# stacked <ea> is correct
-	bsr.l		_dmem_write_long	# write long
-
-	tst.l		%d1			# did dstore fail?
-	bne.l		facc_out_l		# yes
-
-	rts
-
-fout_sgl_exg_write_dn:
-	mov.b		1+EXC_OPWORD(%a6),%d1	# extract Dn
-	andi.w		&0x7,%d1
-	bsr.l		store_dreg_l
-	rts
-
-#
-# here, we know that the operand would UNFL if moved out to single prec,
-# so, denorm and round and then use generic store single routine to
-# write the value to memory.
-#
-fout_sgl_unfl:
-	bset		&unfl_bit,FPSR_EXCEPT(%a6) # set UNFL
-
-	mov.w		SRC_EX(%a0),FP_SCR0_EX(%a6)
-	mov.l		SRC_HI(%a0),FP_SCR0_HI(%a6)
-	mov.l		SRC_LO(%a0),FP_SCR0_LO(%a6)
-	mov.l		%a0,-(%sp)
-
-	clr.l		%d0			# pass: S.F. = 0
-
-	cmpi.b		STAG(%a6),&DENORM	# fetch src optype tag
-	bne.b		fout_sgl_unfl_cont	# let DENORMs fall through
-
-	lea		FP_SCR0(%a6),%a0
-	bsr.l		norm			# normalize the DENORM
-
-fout_sgl_unfl_cont:
-	lea		FP_SCR0(%a6),%a0	# pass: ptr to operand
-	mov.l		L_SCR3(%a6),%d1		# pass: rnd prec,mode
-	bsr.l		unf_res			# calc default underflow result
-
-	lea		FP_SCR0(%a6),%a0	# pass: ptr to fop
-	bsr.l		dst_sgl			# convert to single prec
-
-	mov.b		1+EXC_OPWORD(%a6),%d1	# extract dst mode
-	andi.b		&0x38,%d1		# is mode == 0? (Dreg dst)
-	beq.b		fout_sgl_unfl_dn	# must save to integer regfile
-
-	mov.l		EXC_EA(%a6),%a0		# stacked <ea> is correct
-	bsr.l		_dmem_write_long	# write long
-
-	tst.l		%d1			# did dstore fail?
-	bne.l		facc_out_l		# yes
-
-	bra.b		fout_sgl_unfl_chkexc
-
-fout_sgl_unfl_dn:
-	mov.b		1+EXC_OPWORD(%a6),%d1	# extract Dn
-	andi.w		&0x7,%d1
-	bsr.l		store_dreg_l
-
-fout_sgl_unfl_chkexc:
-	mov.b		FPCR_ENABLE(%a6),%d1
-	andi.b		&0x0a,%d1		# is UNFL or INEX enabled?
-	bne.w		fout_sd_exc_unfl	# yes
-	addq.l		&0x4,%sp
-	rts
-
-#
-# it's definitely an overflow so call ovf_res to get the correct answer
-#
-fout_sgl_ovfl:
-	tst.b		3+SRC_HI(%a0)		# is result inexact?
-	bne.b		fout_sgl_ovfl_inex2
-	tst.l		SRC_LO(%a0)		# is result inexact?
-	bne.b		fout_sgl_ovfl_inex2
-	ori.w		&ovfl_inx_mask,2+USER_FPSR(%a6) # set ovfl/aovfl/ainex
-	bra.b		fout_sgl_ovfl_cont
-fout_sgl_ovfl_inex2:
-	ori.w		&ovfinx_mask,2+USER_FPSR(%a6) # set ovfl/aovfl/ainex/inex2
-
-fout_sgl_ovfl_cont:
-	mov.l		%a0,-(%sp)
-
-# call ovf_res() w/ sgl prec and the correct rnd mode to create the default
-# overflow result. DON'T save the returned ccodes from ovf_res() since
-# fmove out doesn't alter them.
-	tst.b		SRC_EX(%a0)		# is operand negative?
-	smi		%d1			# set if so
-	mov.l		L_SCR3(%a6),%d0		# pass: sgl prec,rnd mode
-	bsr.l		ovf_res			# calc OVFL result
-	fmovm.x		(%a0),&0x80		# load default overflow result
-	fmov.s		%fp0,%d0		# store to single
-
-	mov.b		1+EXC_OPWORD(%a6),%d1	# extract dst mode
-	andi.b		&0x38,%d1		# is mode == 0? (Dreg dst)
-	beq.b		fout_sgl_ovfl_dn	# must save to integer regfile
-
-	mov.l		EXC_EA(%a6),%a0		# stacked <ea> is correct
-	bsr.l		_dmem_write_long	# write long
-
-	tst.l		%d1			# did dstore fail?
-	bne.l		facc_out_l		# yes
-
-	bra.b		fout_sgl_ovfl_chkexc
-
-fout_sgl_ovfl_dn:
-	mov.b		1+EXC_OPWORD(%a6),%d1	# extract Dn
-	andi.w		&0x7,%d1
-	bsr.l		store_dreg_l
-
-fout_sgl_ovfl_chkexc:
-	mov.b		FPCR_ENABLE(%a6),%d1
-	andi.b		&0x0a,%d1		# is UNFL or INEX enabled?
-	bne.w		fout_sd_exc_ovfl	# yes
-	addq.l		&0x4,%sp
-	rts
-
-#
-# move out MAY overflow:
-# (1) force the exp to 0x3fff
-# (2) do a move w/ appropriate rnd mode
-# (3) if exp still equals zero, then insert original exponent
-#	for the correct result.
-#     if exp now equals one, then it overflowed so call ovf_res.
-#
-fout_sgl_may_ovfl:
-	mov.w		SRC_EX(%a0),%d1		# fetch current sign
-	andi.w		&0x8000,%d1		# keep it,clear exp
-	ori.w		&0x3fff,%d1		# insert exp = 0
-	mov.w		%d1,FP_SCR0_EX(%a6)	# insert scaled exp
-	mov.l		SRC_HI(%a0),FP_SCR0_HI(%a6) # copy hi(man)
-	mov.l		SRC_LO(%a0),FP_SCR0_LO(%a6) # copy lo(man)
-
-	fmov.l		L_SCR3(%a6),%fpcr	# set FPCR
-
-	fmov.x		FP_SCR0(%a6),%fp0	# force fop to be rounded
-	fmov.l		&0x0,%fpcr		# clear FPCR
-
-	fabs.x		%fp0			# need absolute value
-	fcmp.b		%fp0,&0x2		# did exponent increase?
-	fblt.w		fout_sgl_exg		# no; go finish NORM
-	bra.w		fout_sgl_ovfl		# yes; go handle overflow
-
-################
-
-fout_sd_exc_unfl:
-	mov.l		(%sp)+,%a0
-
-	mov.w		SRC_EX(%a0),FP_SCR0_EX(%a6)
-	mov.l		SRC_HI(%a0),FP_SCR0_HI(%a6)
-	mov.l		SRC_LO(%a0),FP_SCR0_LO(%a6)
-
-	cmpi.b		STAG(%a6),&DENORM	# was src a DENORM?
-	bne.b		fout_sd_exc_cont	# no
-
-	lea		FP_SCR0(%a6),%a0
-	bsr.l		norm
-	neg.l		%d0
-	andi.w		&0x7fff,%d0
-	bfins		%d0,FP_SCR0_EX(%a6){&1:&15}
-	bra.b		fout_sd_exc_cont
-
-fout_sd_exc:
-fout_sd_exc_ovfl:
-	mov.l		(%sp)+,%a0		# restore a0
-
-	mov.w		SRC_EX(%a0),FP_SCR0_EX(%a6)
-	mov.l		SRC_HI(%a0),FP_SCR0_HI(%a6)
-	mov.l		SRC_LO(%a0),FP_SCR0_LO(%a6)
-
-fout_sd_exc_cont:
-	bclr		&0x7,FP_SCR0_EX(%a6)	# clear sign bit
-	sne.b		2+FP_SCR0_EX(%a6)	# set internal sign bit
-	lea		FP_SCR0(%a6),%a0	# pass: ptr to DENORM
-
-	mov.b		3+L_SCR3(%a6),%d1
-	lsr.b		&0x4,%d1
-	andi.w		&0x0c,%d1
-	swap		%d1
-	mov.b		3+L_SCR3(%a6),%d1
-	lsr.b		&0x4,%d1
-	andi.w		&0x03,%d1
-	clr.l		%d0			# pass: zero g,r,s
-	bsr.l		_round			# round the DENORM
-
-	tst.b		2+FP_SCR0_EX(%a6)	# is EXOP negative?
-	beq.b		fout_sd_exc_done	# no
-	bset		&0x7,FP_SCR0_EX(%a6)	# yes
-
-fout_sd_exc_done:
-	fmovm.x		FP_SCR0(%a6),&0x40	# return EXOP in fp1
-	rts
-
-#################################################################
-# fmove.d out ###################################################
-#################################################################
-fout_dbl:
-	andi.b		&0x30,%d0		# clear rnd prec
-	ori.b		&d_mode*0x10,%d0	# insert dbl prec
-	mov.l		%d0,L_SCR3(%a6)		# save rnd prec,mode on stack
-
-#
-# operand is a normalized number. first, we check to see if the move out
-# would cause either an underflow or overflow. these cases are handled
-# separately. otherwise, set the FPCR to the proper rounding mode and
-# execute the move.
-#
-	mov.w		SRC_EX(%a0),%d0		# extract exponent
-	andi.w		&0x7fff,%d0		# strip sign
-
-	cmpi.w		%d0,&DBL_HI		# will operand overflow?
-	bgt.w		fout_dbl_ovfl		# yes; go handle OVFL
-	beq.w		fout_dbl_may_ovfl	# maybe; go handle possible OVFL
-	cmpi.w		%d0,&DBL_LO		# will operand underflow?
-	blt.w		fout_dbl_unfl		# yes; go handle underflow
-
-#
-# NORMs(in range) can be stored out by a simple "fmov.d"
-# Unnormalized inputs can come through this point.
-#
-fout_dbl_exg:
-	fmovm.x		SRC(%a0),&0x80		# fetch fop from stack
-
-	fmov.l		L_SCR3(%a6),%fpcr	# set FPCR
-	fmov.l		&0x0,%fpsr		# clear FPSR
-
-	fmov.d		%fp0,L_SCR1(%a6)	# store does convert and round
-
-	fmov.l		&0x0,%fpcr		# clear FPCR
-	fmov.l		%fpsr,%d0		# save FPSR
-
-	or.w		%d0,2+USER_FPSR(%a6)	# set possible inex2/ainex
-
-	mov.l		EXC_EA(%a6),%a1		# pass: dst addr
-	lea		L_SCR1(%a6),%a0		# pass: src addr
-	movq.l		&0x8,%d0		# pass: opsize is 8 bytes
-	bsr.l		_dmem_write		# store dbl fop to memory
-
-	tst.l		%d1			# did dstore fail?
-	bne.l		facc_out_d		# yes
-
-	rts					# no; so we're finished
-
-#
-# here, we know that the operand would UNFL if moved out to double prec,
-# so, denorm and round and then use generic store double routine to
-# write the value to memory.
-#
-fout_dbl_unfl:
-	bset		&unfl_bit,FPSR_EXCEPT(%a6) # set UNFL
-
-	mov.w		SRC_EX(%a0),FP_SCR0_EX(%a6)
-	mov.l		SRC_HI(%a0),FP_SCR0_HI(%a6)
-	mov.l		SRC_LO(%a0),FP_SCR0_LO(%a6)
-	mov.l		%a0,-(%sp)
-
-	clr.l		%d0			# pass: S.F. = 0
-
-	cmpi.b		STAG(%a6),&DENORM	# fetch src optype tag
-	bne.b		fout_dbl_unfl_cont	# let DENORMs fall through
-
-	lea		FP_SCR0(%a6),%a0
-	bsr.l		norm			# normalize the DENORM
-
-fout_dbl_unfl_cont:
-	lea		FP_SCR0(%a6),%a0	# pass: ptr to operand
-	mov.l		L_SCR3(%a6),%d1		# pass: rnd prec,mode
-	bsr.l		unf_res			# calc default underflow result
-
-	lea		FP_SCR0(%a6),%a0	# pass: ptr to fop
-	bsr.l		dst_dbl			# convert to single prec
-	mov.l		%d0,L_SCR1(%a6)
-	mov.l		%d1,L_SCR2(%a6)
-
-	mov.l		EXC_EA(%a6),%a1		# pass: dst addr
-	lea		L_SCR1(%a6),%a0		# pass: src addr
-	movq.l		&0x8,%d0		# pass: opsize is 8 bytes
-	bsr.l		_dmem_write		# store dbl fop to memory
-
-	tst.l		%d1			# did dstore fail?
-	bne.l		facc_out_d		# yes
-
-	mov.b		FPCR_ENABLE(%a6),%d1
-	andi.b		&0x0a,%d1		# is UNFL or INEX enabled?
-	bne.w		fout_sd_exc_unfl	# yes
-	addq.l		&0x4,%sp
-	rts
-
-#
-# it's definitely an overflow so call ovf_res to get the correct answer
-#
-fout_dbl_ovfl:
-	mov.w		2+SRC_LO(%a0),%d0
-	andi.w		&0x7ff,%d0
-	bne.b		fout_dbl_ovfl_inex2
-
-	ori.w		&ovfl_inx_mask,2+USER_FPSR(%a6) # set ovfl/aovfl/ainex
-	bra.b		fout_dbl_ovfl_cont
-fout_dbl_ovfl_inex2:
-	ori.w		&ovfinx_mask,2+USER_FPSR(%a6) # set ovfl/aovfl/ainex/inex2
-
-fout_dbl_ovfl_cont:
-	mov.l		%a0,-(%sp)
-
-# call ovf_res() w/ dbl prec and the correct rnd mode to create the default
-# overflow result. DON'T save the returned ccodes from ovf_res() since
-# fmove out doesn't alter them.
-	tst.b		SRC_EX(%a0)		# is operand negative?
-	smi		%d1			# set if so
-	mov.l		L_SCR3(%a6),%d0		# pass: dbl prec,rnd mode
-	bsr.l		ovf_res			# calc OVFL result
-	fmovm.x		(%a0),&0x80		# load default overflow result
-	fmov.d		%fp0,L_SCR1(%a6)	# store to double
-
-	mov.l		EXC_EA(%a6),%a1		# pass: dst addr
-	lea		L_SCR1(%a6),%a0		# pass: src addr
-	movq.l		&0x8,%d0		# pass: opsize is 8 bytes
-	bsr.l		_dmem_write		# store dbl fop to memory
-
-	tst.l		%d1			# did dstore fail?
-	bne.l		facc_out_d		# yes
-
-	mov.b		FPCR_ENABLE(%a6),%d1
-	andi.b		&0x0a,%d1		# is UNFL or INEX enabled?
-	bne.w		fout_sd_exc_ovfl	# yes
-	addq.l		&0x4,%sp
-	rts
-
-#
-# move out MAY overflow:
-# (1) force the exp to 0x3fff
-# (2) do a move w/ appropriate rnd mode
-# (3) if exp still equals zero, then insert original exponent
-#	for the correct result.
-#     if exp now equals one, then it overflowed so call ovf_res.
-#
-fout_dbl_may_ovfl:
-	mov.w		SRC_EX(%a0),%d1		# fetch current sign
-	andi.w		&0x8000,%d1		# keep it,clear exp
-	ori.w		&0x3fff,%d1		# insert exp = 0
-	mov.w		%d1,FP_SCR0_EX(%a6)	# insert scaled exp
-	mov.l		SRC_HI(%a0),FP_SCR0_HI(%a6) # copy hi(man)
-	mov.l		SRC_LO(%a0),FP_SCR0_LO(%a6) # copy lo(man)
-
-	fmov.l		L_SCR3(%a6),%fpcr	# set FPCR
-
-	fmov.x		FP_SCR0(%a6),%fp0	# force fop to be rounded
-	fmov.l		&0x0,%fpcr		# clear FPCR
-
-	fabs.x		%fp0			# need absolute value
-	fcmp.b		%fp0,&0x2		# did exponent increase?
-	fblt.w		fout_dbl_exg		# no; go finish NORM
-	bra.w		fout_dbl_ovfl		# yes; go handle overflow
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	dst_dbl(): create double precision value from extended prec.	#
-#									#
-# XREF ****************************************************************	#
-#	None								#
-#									#
-# INPUT ***************************************************************	#
-#	a0 = pointer to source operand in extended precision		#
-#									#
-# OUTPUT **************************************************************	#
-#	d0 = hi(double precision result)				#
-#	d1 = lo(double precision result)				#
-#									#
-# ALGORITHM ***********************************************************	#
-#									#
-#  Changes extended precision to double precision.			#
-#  Note: no attempt is made to round the extended value to double.	#
-#	dbl_sign = ext_sign						#
-#	dbl_exp = ext_exp - $3fff(ext bias) + $7ff(dbl bias)		#
-#	get rid of ext integer bit					#
-#	dbl_mant = ext_mant{62:12}					#
-#									#
-#		---------------   ---------------    ---------------	#
-#  extended ->  |s|    exp    |   |1| ms mant   |    | ls mant     |	#
-#		---------------   ---------------    ---------------	#
-#		 95	    64    63 62	      32      31     11	  0	#
-#				     |			     |		#
-#				     |			     |		#
-#				     |			     |		#
-#			             v			     v		#
-#			      ---------------   ---------------		#
-#  double   ->		      |s|exp| mant  |   |  mant       |		#
-#			      ---------------   ---------------		#
-#			      63     51   32   31	       0	#
-#									#
-#########################################################################
-
-dst_dbl:
-	clr.l		%d0			# clear d0
-	mov.w		FTEMP_EX(%a0),%d0	# get exponent
-	subi.w		&EXT_BIAS,%d0		# subtract extended precision bias
-	addi.w		&DBL_BIAS,%d0		# add double precision bias
-	tst.b		FTEMP_HI(%a0)		# is number a denorm?
-	bmi.b		dst_get_dupper		# no
-	subq.w		&0x1,%d0		# yes; denorm bias = DBL_BIAS - 1
-dst_get_dupper:
-	swap		%d0			# d0 now in upper word
-	lsl.l		&0x4,%d0		# d0 in proper place for dbl prec exp
-	tst.b		FTEMP_EX(%a0)		# test sign
-	bpl.b		dst_get_dman		# if positive, go process mantissa
-	bset		&0x1f,%d0		# if negative, set sign
-dst_get_dman:
-	mov.l		FTEMP_HI(%a0),%d1	# get ms mantissa
-	bfextu		%d1{&1:&20},%d1		# get upper 20 bits of ms
-	or.l		%d1,%d0			# put these bits in ms word of double
-	mov.l		%d0,L_SCR1(%a6)		# put the new exp back on the stack
-	mov.l		FTEMP_HI(%a0),%d1	# get ms mantissa
-	mov.l		&21,%d0			# load shift count
-	lsl.l		%d0,%d1			# put lower 11 bits in upper bits
-	mov.l		%d1,L_SCR2(%a6)		# build lower lword in memory
-	mov.l		FTEMP_LO(%a0),%d1	# get ls mantissa
-	bfextu		%d1{&0:&21},%d0		# get ls 21 bits of double
-	mov.l		L_SCR2(%a6),%d1
-	or.l		%d0,%d1			# put them in double result
-	mov.l		L_SCR1(%a6),%d0
-	rts
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	dst_sgl(): create single precision value from extended prec	#
-#									#
-# XREF ****************************************************************	#
-#									#
-# INPUT ***************************************************************	#
-#	a0 = pointer to source operand in extended precision		#
-#									#
-# OUTPUT **************************************************************	#
-#	d0 = single precision result					#
-#									#
-# ALGORITHM ***********************************************************	#
-#									#
-# Changes extended precision to single precision.			#
-#	sgl_sign = ext_sign						#
-#	sgl_exp = ext_exp - $3fff(ext bias) + $7f(sgl bias)		#
-#	get rid of ext integer bit					#
-#	sgl_mant = ext_mant{62:12}					#
-#									#
-#		---------------   ---------------    ---------------	#
-#  extended ->  |s|    exp    |   |1| ms mant   |    | ls mant     |	#
-#		---------------   ---------------    ---------------	#
-#		 95	    64    63 62	   40 32      31     12	  0	#
-#				     |	   |				#
-#				     |	   |				#
-#				     |	   |				#
-#			             v     v				#
-#			      ---------------				#
-#  single   ->		      |s|exp| mant  |				#
-#			      ---------------				#
-#			      31     22     0				#
-#									#
-#########################################################################
-
-dst_sgl:
-	clr.l		%d0
-	mov.w		FTEMP_EX(%a0),%d0	# get exponent
-	subi.w		&EXT_BIAS,%d0		# subtract extended precision bias
-	addi.w		&SGL_BIAS,%d0		# add single precision bias
-	tst.b		FTEMP_HI(%a0)		# is number a denorm?
-	bmi.b		dst_get_supper		# no
-	subq.w		&0x1,%d0		# yes; denorm bias = SGL_BIAS - 1
-dst_get_supper:
-	swap		%d0			# put exp in upper word of d0
-	lsl.l		&0x7,%d0		# shift it into single exp bits
-	tst.b		FTEMP_EX(%a0)		# test sign
-	bpl.b		dst_get_sman		# if positive, continue
-	bset		&0x1f,%d0		# if negative, put in sign first
-dst_get_sman:
-	mov.l		FTEMP_HI(%a0),%d1	# get ms mantissa
-	andi.l		&0x7fffff00,%d1		# get upper 23 bits of ms
-	lsr.l		&0x8,%d1		# and put them flush right
-	or.l		%d1,%d0			# put these bits in ms word of single
-	rts
-
-##############################################################################
-fout_pack:
-	bsr.l		_calc_ea_fout		# fetch the <ea>
-	mov.l		%a0,-(%sp)
-
-	mov.b		STAG(%a6),%d0		# fetch input type
-	bne.w		fout_pack_not_norm	# input is not NORM
-
-fout_pack_norm:
-	btst		&0x4,EXC_CMDREG(%a6)	# static or dynamic?
-	beq.b		fout_pack_s		# static
-
-fout_pack_d:
-	mov.b		1+EXC_CMDREG(%a6),%d1	# fetch dynamic reg
-	lsr.b		&0x4,%d1
-	andi.w		&0x7,%d1
-
-	bsr.l		fetch_dreg		# fetch Dn w/ k-factor
-
-	bra.b		fout_pack_type
-fout_pack_s:
-	mov.b		1+EXC_CMDREG(%a6),%d0	# fetch static field
-
-fout_pack_type:
-	bfexts		%d0{&25:&7},%d0		# extract k-factor
-	mov.l	%d0,-(%sp)
-
-	lea		FP_SRC(%a6),%a0		# pass: ptr to input
-
-# bindec is currently scrambling FP_SRC for denorm inputs.
-# we'll have to change this, but for now, tough luck!!!
-	bsr.l		bindec			# convert xprec to packed
-
-#	andi.l		&0xcfff000f,FP_SCR0(%a6) # clear unused fields
-	andi.l		&0xcffff00f,FP_SCR0(%a6) # clear unused fields
-
-	mov.l	(%sp)+,%d0
-
-	tst.b		3+FP_SCR0_EX(%a6)
-	bne.b		fout_pack_set
-	tst.l		FP_SCR0_HI(%a6)
-	bne.b		fout_pack_set
-	tst.l		FP_SCR0_LO(%a6)
-	bne.b		fout_pack_set
-
-# add the extra condition that only if the k-factor was zero, too, should
-# we zero the exponent
-	tst.l		%d0
-	bne.b		fout_pack_set
-# "mantissa" is all zero which means that the answer is zero. but, the '040
-# algorithm allows the exponent to be non-zero. the 881/2 do not. Therefore,
-# if the mantissa is zero, I will zero the exponent, too.
-# the question now is whether the exponents sign bit is allowed to be non-zero
-# for a zero, also...
-	andi.w		&0xf000,FP_SCR0(%a6)
-
-fout_pack_set:
-
-	lea		FP_SCR0(%a6),%a0	# pass: src addr
-
-fout_pack_write:
-	mov.l		(%sp)+,%a1		# pass: dst addr
-	mov.l		&0xc,%d0		# pass: opsize is 12 bytes
-
-	cmpi.b		SPCOND_FLG(%a6),&mda7_flg
-	beq.b		fout_pack_a7
-
-	bsr.l		_dmem_write		# write ext prec number to memory
-
-	tst.l		%d1			# did dstore fail?
-	bne.w		fout_ext_err		# yes
-
-	rts
-
-# we don't want to do the write if the exception occurred in supervisor mode
-# so _mem_write2() handles this for us.
-fout_pack_a7:
-	bsr.l		_mem_write2		# write ext prec number to memory
-
-	tst.l		%d1			# did dstore fail?
-	bne.w		fout_ext_err		# yes
-
-	rts
-
-fout_pack_not_norm:
-	cmpi.b		%d0,&DENORM		# is it a DENORM?
-	beq.w		fout_pack_norm		# yes
-	lea		FP_SRC(%a6),%a0
-	clr.w		2+FP_SRC_EX(%a6)
-	cmpi.b		%d0,&SNAN		# is it an SNAN?
-	beq.b		fout_pack_snan		# yes
-	bra.b		fout_pack_write		# no
-
-fout_pack_snan:
-	ori.w		&snaniop2_mask,FPSR_EXCEPT(%a6) # set SNAN/AIOP
-	bset		&0x6,FP_SRC_HI(%a6)	# set snan bit
-	bra.b		fout_pack_write
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	fetch_dreg(): fetch register according to index in d1		#
-#									#
-# XREF ****************************************************************	#
-#	None								#
-#									#
-# INPUT ***************************************************************	#
-#	d1 = index of register to fetch from				#
-#									#
-# OUTPUT **************************************************************	#
-#	d0 = value of register fetched					#
-#									#
-# ALGORITHM ***********************************************************	#
-#	According to the index value in d1 which can range from zero	#
-# to fifteen, load the corresponding register file value (where		#
-# address register indexes start at 8). D0/D1/A0/A1/A6/A7 are on the	#
-# stack. The rest should still be in their original places.		#
-#									#
-#########################################################################
-
-# this routine leaves d1 intact for subsequent store_dreg calls.
-	global		fetch_dreg
-fetch_dreg:
-	mov.w		(tbl_fdreg.b,%pc,%d1.w*2),%d0
-	jmp		(tbl_fdreg.b,%pc,%d0.w*1)
-
-tbl_fdreg:
-	short		fdreg0 - tbl_fdreg
-	short		fdreg1 - tbl_fdreg
-	short		fdreg2 - tbl_fdreg
-	short		fdreg3 - tbl_fdreg
-	short		fdreg4 - tbl_fdreg
-	short		fdreg5 - tbl_fdreg
-	short		fdreg6 - tbl_fdreg
-	short		fdreg7 - tbl_fdreg
-	short		fdreg8 - tbl_fdreg
-	short		fdreg9 - tbl_fdreg
-	short		fdrega - tbl_fdreg
-	short		fdregb - tbl_fdreg
-	short		fdregc - tbl_fdreg
-	short		fdregd - tbl_fdreg
-	short		fdrege - tbl_fdreg
-	short		fdregf - tbl_fdreg
-
-fdreg0:
-	mov.l		EXC_DREGS+0x0(%a6),%d0
-	rts
-fdreg1:
-	mov.l		EXC_DREGS+0x4(%a6),%d0
-	rts
-fdreg2:
-	mov.l		%d2,%d0
-	rts
-fdreg3:
-	mov.l		%d3,%d0
-	rts
-fdreg4:
-	mov.l		%d4,%d0
-	rts
-fdreg5:
-	mov.l		%d5,%d0
-	rts
-fdreg6:
-	mov.l		%d6,%d0
-	rts
-fdreg7:
-	mov.l		%d7,%d0
-	rts
-fdreg8:
-	mov.l		EXC_DREGS+0x8(%a6),%d0
-	rts
-fdreg9:
-	mov.l		EXC_DREGS+0xc(%a6),%d0
-	rts
-fdrega:
-	mov.l		%a2,%d0
-	rts
-fdregb:
-	mov.l		%a3,%d0
-	rts
-fdregc:
-	mov.l		%a4,%d0
-	rts
-fdregd:
-	mov.l		%a5,%d0
-	rts
-fdrege:
-	mov.l		(%a6),%d0
-	rts
-fdregf:
-	mov.l		EXC_A7(%a6),%d0
-	rts
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	store_dreg_l(): store longword to data register specified by d1	#
-#									#
-# XREF ****************************************************************	#
-#	None								#
-#									#
-# INPUT ***************************************************************	#
-#	d0 = longowrd value to store					#
-#	d1 = index of register to fetch from				#
-#									#
-# OUTPUT **************************************************************	#
-#	(data register is updated)					#
-#									#
-# ALGORITHM ***********************************************************	#
-#	According to the index value in d1, store the longword value	#
-# in d0 to the corresponding data register. D0/D1 are on the stack	#
-# while the rest are in their initial places.				#
-#									#
-#########################################################################
-
-	global		store_dreg_l
-store_dreg_l:
-	mov.w		(tbl_sdregl.b,%pc,%d1.w*2),%d1
-	jmp		(tbl_sdregl.b,%pc,%d1.w*1)
-
-tbl_sdregl:
-	short		sdregl0 - tbl_sdregl
-	short		sdregl1 - tbl_sdregl
-	short		sdregl2 - tbl_sdregl
-	short		sdregl3 - tbl_sdregl
-	short		sdregl4 - tbl_sdregl
-	short		sdregl5 - tbl_sdregl
-	short		sdregl6 - tbl_sdregl
-	short		sdregl7 - tbl_sdregl
-
-sdregl0:
-	mov.l		%d0,EXC_DREGS+0x0(%a6)
-	rts
-sdregl1:
-	mov.l		%d0,EXC_DREGS+0x4(%a6)
-	rts
-sdregl2:
-	mov.l		%d0,%d2
-	rts
-sdregl3:
-	mov.l		%d0,%d3
-	rts
-sdregl4:
-	mov.l		%d0,%d4
-	rts
-sdregl5:
-	mov.l		%d0,%d5
-	rts
-sdregl6:
-	mov.l		%d0,%d6
-	rts
-sdregl7:
-	mov.l		%d0,%d7
-	rts
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	store_dreg_w(): store word to data register specified by d1	#
-#									#
-# XREF ****************************************************************	#
-#	None								#
-#									#
-# INPUT ***************************************************************	#
-#	d0 = word value to store					#
-#	d1 = index of register to fetch from				#
-#									#
-# OUTPUT **************************************************************	#
-#	(data register is updated)					#
-#									#
-# ALGORITHM ***********************************************************	#
-#	According to the index value in d1, store the word value	#
-# in d0 to the corresponding data register. D0/D1 are on the stack	#
-# while the rest are in their initial places.				#
-#									#
-#########################################################################
-
-	global		store_dreg_w
-store_dreg_w:
-	mov.w		(tbl_sdregw.b,%pc,%d1.w*2),%d1
-	jmp		(tbl_sdregw.b,%pc,%d1.w*1)
-
-tbl_sdregw:
-	short		sdregw0 - tbl_sdregw
-	short		sdregw1 - tbl_sdregw
-	short		sdregw2 - tbl_sdregw
-	short		sdregw3 - tbl_sdregw
-	short		sdregw4 - tbl_sdregw
-	short		sdregw5 - tbl_sdregw
-	short		sdregw6 - tbl_sdregw
-	short		sdregw7 - tbl_sdregw
-
-sdregw0:
-	mov.w		%d0,2+EXC_DREGS+0x0(%a6)
-	rts
-sdregw1:
-	mov.w		%d0,2+EXC_DREGS+0x4(%a6)
-	rts
-sdregw2:
-	mov.w		%d0,%d2
-	rts
-sdregw3:
-	mov.w		%d0,%d3
-	rts
-sdregw4:
-	mov.w		%d0,%d4
-	rts
-sdregw5:
-	mov.w		%d0,%d5
-	rts
-sdregw6:
-	mov.w		%d0,%d6
-	rts
-sdregw7:
-	mov.w		%d0,%d7
-	rts
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	store_dreg_b(): store byte to data register specified by d1	#
-#									#
-# XREF ****************************************************************	#
-#	None								#
-#									#
-# INPUT ***************************************************************	#
-#	d0 = byte value to store					#
-#	d1 = index of register to fetch from				#
-#									#
-# OUTPUT **************************************************************	#
-#	(data register is updated)					#
-#									#
-# ALGORITHM ***********************************************************	#
-#	According to the index value in d1, store the byte value	#
-# in d0 to the corresponding data register. D0/D1 are on the stack	#
-# while the rest are in their initial places.				#
-#									#
-#########################################################################
-
-	global		store_dreg_b
-store_dreg_b:
-	mov.w		(tbl_sdregb.b,%pc,%d1.w*2),%d1
-	jmp		(tbl_sdregb.b,%pc,%d1.w*1)
-
-tbl_sdregb:
-	short		sdregb0 - tbl_sdregb
-	short		sdregb1 - tbl_sdregb
-	short		sdregb2 - tbl_sdregb
-	short		sdregb3 - tbl_sdregb
-	short		sdregb4 - tbl_sdregb
-	short		sdregb5 - tbl_sdregb
-	short		sdregb6 - tbl_sdregb
-	short		sdregb7 - tbl_sdregb
-
-sdregb0:
-	mov.b		%d0,3+EXC_DREGS+0x0(%a6)
-	rts
-sdregb1:
-	mov.b		%d0,3+EXC_DREGS+0x4(%a6)
-	rts
-sdregb2:
-	mov.b		%d0,%d2
-	rts
-sdregb3:
-	mov.b		%d0,%d3
-	rts
-sdregb4:
-	mov.b		%d0,%d4
-	rts
-sdregb5:
-	mov.b		%d0,%d5
-	rts
-sdregb6:
-	mov.b		%d0,%d6
-	rts
-sdregb7:
-	mov.b		%d0,%d7
-	rts
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	inc_areg(): increment an address register by the value in d0	#
-#									#
-# XREF ****************************************************************	#
-#	None								#
-#									#
-# INPUT ***************************************************************	#
-#	d0 = amount to increment by					#
-#	d1 = index of address register to increment			#
-#									#
-# OUTPUT **************************************************************	#
-#	(address register is updated)					#
-#									#
-# ALGORITHM ***********************************************************	#
-#	Typically used for an instruction w/ a post-increment <ea>,	#
-# this routine adds the increment value in d0 to the address register	#
-# specified by d1. A0/A1/A6/A7 reside on the stack. The rest reside	#
-# in their original places.						#
-#	For a7, if the increment amount is one, then we have to		#
-# increment by two. For any a7 update, set the mia7_flag so that if	#
-# an access error exception occurs later in emulation, this address	#
-# register update can be undone.					#
-#									#
-#########################################################################
-
-	global		inc_areg
-inc_areg:
-	mov.w		(tbl_iareg.b,%pc,%d1.w*2),%d1
-	jmp		(tbl_iareg.b,%pc,%d1.w*1)
-
-tbl_iareg:
-	short		iareg0 - tbl_iareg
-	short		iareg1 - tbl_iareg
-	short		iareg2 - tbl_iareg
-	short		iareg3 - tbl_iareg
-	short		iareg4 - tbl_iareg
-	short		iareg5 - tbl_iareg
-	short		iareg6 - tbl_iareg
-	short		iareg7 - tbl_iareg
-
-iareg0:	add.l		%d0,EXC_DREGS+0x8(%a6)
-	rts
-iareg1:	add.l		%d0,EXC_DREGS+0xc(%a6)
-	rts
-iareg2:	add.l		%d0,%a2
-	rts
-iareg3:	add.l		%d0,%a3
-	rts
-iareg4:	add.l		%d0,%a4
-	rts
-iareg5:	add.l		%d0,%a5
-	rts
-iareg6:	add.l		%d0,(%a6)
-	rts
-iareg7:	mov.b		&mia7_flg,SPCOND_FLG(%a6)
-	cmpi.b		%d0,&0x1
-	beq.b		iareg7b
-	add.l		%d0,EXC_A7(%a6)
-	rts
-iareg7b:
-	addq.l		&0x2,EXC_A7(%a6)
-	rts
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	dec_areg(): decrement an address register by the value in d0	#
-#									#
-# XREF ****************************************************************	#
-#	None								#
-#									#
-# INPUT ***************************************************************	#
-#	d0 = amount to decrement by					#
-#	d1 = index of address register to decrement			#
-#									#
-# OUTPUT **************************************************************	#
-#	(address register is updated)					#
-#									#
-# ALGORITHM ***********************************************************	#
-#	Typically used for an instruction w/ a pre-decrement <ea>,	#
-# this routine adds the decrement value in d0 to the address register	#
-# specified by d1. A0/A1/A6/A7 reside on the stack. The rest reside	#
-# in their original places.						#
-#	For a7, if the decrement amount is one, then we have to		#
-# decrement by two. For any a7 update, set the mda7_flag so that if	#
-# an access error exception occurs later in emulation, this address	#
-# register update can be undone.					#
-#									#
-#########################################################################
-
-	global		dec_areg
-dec_areg:
-	mov.w		(tbl_dareg.b,%pc,%d1.w*2),%d1
-	jmp		(tbl_dareg.b,%pc,%d1.w*1)
-
-tbl_dareg:
-	short		dareg0 - tbl_dareg
-	short		dareg1 - tbl_dareg
-	short		dareg2 - tbl_dareg
-	short		dareg3 - tbl_dareg
-	short		dareg4 - tbl_dareg
-	short		dareg5 - tbl_dareg
-	short		dareg6 - tbl_dareg
-	short		dareg7 - tbl_dareg
-
-dareg0:	sub.l		%d0,EXC_DREGS+0x8(%a6)
-	rts
-dareg1:	sub.l		%d0,EXC_DREGS+0xc(%a6)
-	rts
-dareg2:	sub.l		%d0,%a2
-	rts
-dareg3:	sub.l		%d0,%a3
-	rts
-dareg4:	sub.l		%d0,%a4
-	rts
-dareg5:	sub.l		%d0,%a5
-	rts
-dareg6:	sub.l		%d0,(%a6)
-	rts
-dareg7:	mov.b		&mda7_flg,SPCOND_FLG(%a6)
-	cmpi.b		%d0,&0x1
-	beq.b		dareg7b
-	sub.l		%d0,EXC_A7(%a6)
-	rts
-dareg7b:
-	subq.l		&0x2,EXC_A7(%a6)
-	rts
-
-##############################################################################
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	load_fpn1(): load FP register value into FP_SRC(a6).		#
-#									#
-# XREF ****************************************************************	#
-#	None								#
-#									#
-# INPUT ***************************************************************	#
-#	d0 = index of FP register to load				#
-#									#
-# OUTPUT **************************************************************	#
-#	FP_SRC(a6) = value loaded from FP register file			#
-#									#
-# ALGORITHM ***********************************************************	#
-#	Using the index in d0, load FP_SRC(a6) with a number from the	#
-# FP register file.							#
-#									#
-#########################################################################
-
-	global		load_fpn1
-load_fpn1:
-	mov.w		(tbl_load_fpn1.b,%pc,%d0.w*2), %d0
-	jmp		(tbl_load_fpn1.b,%pc,%d0.w*1)
-
-tbl_load_fpn1:
-	short		load_fpn1_0 - tbl_load_fpn1
-	short		load_fpn1_1 - tbl_load_fpn1
-	short		load_fpn1_2 - tbl_load_fpn1
-	short		load_fpn1_3 - tbl_load_fpn1
-	short		load_fpn1_4 - tbl_load_fpn1
-	short		load_fpn1_5 - tbl_load_fpn1
-	short		load_fpn1_6 - tbl_load_fpn1
-	short		load_fpn1_7 - tbl_load_fpn1
-
-load_fpn1_0:
-	mov.l		0+EXC_FP0(%a6), 0+FP_SRC(%a6)
-	mov.l		4+EXC_FP0(%a6), 4+FP_SRC(%a6)
-	mov.l		8+EXC_FP0(%a6), 8+FP_SRC(%a6)
-	lea		FP_SRC(%a6), %a0
-	rts
-load_fpn1_1:
-	mov.l		0+EXC_FP1(%a6), 0+FP_SRC(%a6)
-	mov.l		4+EXC_FP1(%a6), 4+FP_SRC(%a6)
-	mov.l		8+EXC_FP1(%a6), 8+FP_SRC(%a6)
-	lea		FP_SRC(%a6), %a0
-	rts
-load_fpn1_2:
-	fmovm.x		&0x20, FP_SRC(%a6)
-	lea		FP_SRC(%a6), %a0
-	rts
-load_fpn1_3:
-	fmovm.x		&0x10, FP_SRC(%a6)
-	lea		FP_SRC(%a6), %a0
-	rts
-load_fpn1_4:
-	fmovm.x		&0x08, FP_SRC(%a6)
-	lea		FP_SRC(%a6), %a0
-	rts
-load_fpn1_5:
-	fmovm.x		&0x04, FP_SRC(%a6)
-	lea		FP_SRC(%a6), %a0
-	rts
-load_fpn1_6:
-	fmovm.x		&0x02, FP_SRC(%a6)
-	lea		FP_SRC(%a6), %a0
-	rts
-load_fpn1_7:
-	fmovm.x		&0x01, FP_SRC(%a6)
-	lea		FP_SRC(%a6), %a0
-	rts
-
-#############################################################################
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	load_fpn2(): load FP register value into FP_DST(a6).		#
-#									#
-# XREF ****************************************************************	#
-#	None								#
-#									#
-# INPUT ***************************************************************	#
-#	d0 = index of FP register to load				#
-#									#
-# OUTPUT **************************************************************	#
-#	FP_DST(a6) = value loaded from FP register file			#
-#									#
-# ALGORITHM ***********************************************************	#
-#	Using the index in d0, load FP_DST(a6) with a number from the	#
-# FP register file.							#
-#									#
-#########################################################################
-
-	global		load_fpn2
-load_fpn2:
-	mov.w		(tbl_load_fpn2.b,%pc,%d0.w*2), %d0
-	jmp		(tbl_load_fpn2.b,%pc,%d0.w*1)
-
-tbl_load_fpn2:
-	short		load_fpn2_0 - tbl_load_fpn2
-	short		load_fpn2_1 - tbl_load_fpn2
-	short		load_fpn2_2 - tbl_load_fpn2
-	short		load_fpn2_3 - tbl_load_fpn2
-	short		load_fpn2_4 - tbl_load_fpn2
-	short		load_fpn2_5 - tbl_load_fpn2
-	short		load_fpn2_6 - tbl_load_fpn2
-	short		load_fpn2_7 - tbl_load_fpn2
-
-load_fpn2_0:
-	mov.l		0+EXC_FP0(%a6), 0+FP_DST(%a6)
-	mov.l		4+EXC_FP0(%a6), 4+FP_DST(%a6)
-	mov.l		8+EXC_FP0(%a6), 8+FP_DST(%a6)
-	lea		FP_DST(%a6), %a0
-	rts
-load_fpn2_1:
-	mov.l		0+EXC_FP1(%a6), 0+FP_DST(%a6)
-	mov.l		4+EXC_FP1(%a6), 4+FP_DST(%a6)
-	mov.l		8+EXC_FP1(%a6), 8+FP_DST(%a6)
-	lea		FP_DST(%a6), %a0
-	rts
-load_fpn2_2:
-	fmovm.x		&0x20, FP_DST(%a6)
-	lea		FP_DST(%a6), %a0
-	rts
-load_fpn2_3:
-	fmovm.x		&0x10, FP_DST(%a6)
-	lea		FP_DST(%a6), %a0
-	rts
-load_fpn2_4:
-	fmovm.x		&0x08, FP_DST(%a6)
-	lea		FP_DST(%a6), %a0
-	rts
-load_fpn2_5:
-	fmovm.x		&0x04, FP_DST(%a6)
-	lea		FP_DST(%a6), %a0
-	rts
-load_fpn2_6:
-	fmovm.x		&0x02, FP_DST(%a6)
-	lea		FP_DST(%a6), %a0
-	rts
-load_fpn2_7:
-	fmovm.x		&0x01, FP_DST(%a6)
-	lea		FP_DST(%a6), %a0
-	rts
-
-#############################################################################
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	store_fpreg(): store an fp value to the fpreg designated d0.	#
-#									#
-# XREF ****************************************************************	#
-#	None								#
-#									#
-# INPUT ***************************************************************	#
-#	fp0 = extended precision value to store				#
-#	d0  = index of floating-point register				#
-#									#
-# OUTPUT **************************************************************	#
-#	None								#
-#									#
-# ALGORITHM ***********************************************************	#
-#	Store the value in fp0 to the FP register designated by the	#
-# value in d0. The FP number can be DENORM or SNAN so we have to be	#
-# careful that we don't take an exception here.				#
-#									#
-#########################################################################
-
-	global		store_fpreg
-store_fpreg:
-	mov.w		(tbl_store_fpreg.b,%pc,%d0.w*2), %d0
-	jmp		(tbl_store_fpreg.b,%pc,%d0.w*1)
-
-tbl_store_fpreg:
-	short		store_fpreg_0 - tbl_store_fpreg
-	short		store_fpreg_1 - tbl_store_fpreg
-	short		store_fpreg_2 - tbl_store_fpreg
-	short		store_fpreg_3 - tbl_store_fpreg
-	short		store_fpreg_4 - tbl_store_fpreg
-	short		store_fpreg_5 - tbl_store_fpreg
-	short		store_fpreg_6 - tbl_store_fpreg
-	short		store_fpreg_7 - tbl_store_fpreg
-
-store_fpreg_0:
-	fmovm.x		&0x80, EXC_FP0(%a6)
-	rts
-store_fpreg_1:
-	fmovm.x		&0x80, EXC_FP1(%a6)
-	rts
-store_fpreg_2:
-	fmovm.x		&0x01, -(%sp)
-	fmovm.x		(%sp)+, &0x20
-	rts
-store_fpreg_3:
-	fmovm.x		&0x01, -(%sp)
-	fmovm.x		(%sp)+, &0x10
-	rts
-store_fpreg_4:
-	fmovm.x		&0x01, -(%sp)
-	fmovm.x		(%sp)+, &0x08
-	rts
-store_fpreg_5:
-	fmovm.x		&0x01, -(%sp)
-	fmovm.x		(%sp)+, &0x04
-	rts
-store_fpreg_6:
-	fmovm.x		&0x01, -(%sp)
-	fmovm.x		(%sp)+, &0x02
-	rts
-store_fpreg_7:
-	fmovm.x		&0x01, -(%sp)
-	fmovm.x		(%sp)+, &0x01
-	rts
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	_denorm(): denormalize an intermediate result			#
-#									#
-# XREF ****************************************************************	#
-#	None								#
-#									#
-# INPUT *************************************************************** #
-#	a0 = points to the operand to be denormalized			#
-#		(in the internal extended format)			#
-#									#
-#	d0 = rounding precision						#
-#									#
-# OUTPUT **************************************************************	#
-#	a0 = pointer to the denormalized result				#
-#		(in the internal extended format)			#
-#									#
-#	d0 = guard,round,sticky						#
-#									#
-# ALGORITHM ***********************************************************	#
-#	According to the exponent underflow threshold for the given	#
-# precision, shift the mantissa bits to the right in order raise the	#
-# exponent of the operand to the threshold value. While shifting the	#
-# mantissa bits right, maintain the value of the guard, round, and	#
-# sticky bits.								#
-# other notes:								#
-#	(1) _denorm() is called by the underflow routines		#
-#	(2) _denorm() does NOT affect the status register		#
-#									#
-#########################################################################
-
-#
-# table of exponent threshold values for each precision
-#
-tbl_thresh:
-	short		0x0
-	short		sgl_thresh
-	short		dbl_thresh
-
-	global		_denorm
-_denorm:
-#
-# Load the exponent threshold for the precision selected and check
-# to see if (threshold - exponent) is > 65 in which case we can
-# simply calculate the sticky bit and zero the mantissa. otherwise
-# we have to call the denormalization routine.
-#
-	lsr.b		&0x2, %d0		# shift prec to lo bits
-	mov.w		(tbl_thresh.b,%pc,%d0.w*2), %d1 # load prec threshold
-	mov.w		%d1, %d0		# copy d1 into d0
-	sub.w		FTEMP_EX(%a0), %d0	# diff = threshold - exp
-	cmpi.w		%d0, &66		# is diff > 65? (mant + g,r bits)
-	bpl.b		denorm_set_stky		# yes; just calc sticky
-
-	clr.l		%d0			# clear g,r,s
-	btst		&inex2_bit, FPSR_EXCEPT(%a6) # yes; was INEX2 set?
-	beq.b		denorm_call		# no; don't change anything
-	bset		&29, %d0		# yes; set sticky bit
-
-denorm_call:
-	bsr.l		dnrm_lp			# denormalize the number
-	rts
-
-#
-# all bit would have been shifted off during the denorm so simply
-# calculate if the sticky should be set and clear the entire mantissa.
-#
-denorm_set_stky:
-	mov.l		&0x20000000, %d0	# set sticky bit in return value
-	mov.w		%d1, FTEMP_EX(%a0)	# load exp with threshold
-	clr.l		FTEMP_HI(%a0)		# set d1 = 0 (ms mantissa)
-	clr.l		FTEMP_LO(%a0)		# set d2 = 0 (ms mantissa)
-	rts
-
-#									#
-# dnrm_lp(): normalize exponent/mantissa to specified threshold		#
-#									#
-# INPUT:								#
-#	%a0	   : points to the operand to be denormalized		#
-#	%d0{31:29} : initial guard,round,sticky				#
-#	%d1{15:0}  : denormalization threshold				#
-# OUTPUT:								#
-#	%a0	   : points to the denormalized operand			#
-#	%d0{31:29} : final guard,round,sticky				#
-#									#
-
-# *** Local Equates *** #
-set	GRS,		L_SCR2			# g,r,s temp storage
-set	FTEMP_LO2,	L_SCR1			# FTEMP_LO copy
-
-	global		dnrm_lp
-dnrm_lp:
-
-#
-# make a copy of FTEMP_LO and place the g,r,s bits directly after it
-# in memory so as to make the bitfield extraction for denormalization easier.
-#
-	mov.l		FTEMP_LO(%a0), FTEMP_LO2(%a6) # make FTEMP_LO copy
-	mov.l		%d0, GRS(%a6)		# place g,r,s after it
-
-#
-# check to see how much less than the underflow threshold the operand
-# exponent is.
-#
-	mov.l		%d1, %d0		# copy the denorm threshold
-	sub.w		FTEMP_EX(%a0), %d1	# d1 = threshold - uns exponent
-	ble.b		dnrm_no_lp		# d1 <= 0
-	cmpi.w		%d1, &0x20		# is ( 0 <= d1 < 32) ?
-	blt.b		case_1			# yes
-	cmpi.w		%d1, &0x40		# is (32 <= d1 < 64) ?
-	blt.b		case_2			# yes
-	bra.w		case_3			# (d1 >= 64)
-
-#
-# No normalization necessary
-#
-dnrm_no_lp:
-	mov.l		GRS(%a6), %d0		# restore original g,r,s
-	rts
-
-#
-# case (0<d1<32)
-#
-# %d0 = denorm threshold
-# %d1 = "n" = amt to shift
-#
-#	---------------------------------------------------------
-#	|     FTEMP_HI	  |	FTEMP_LO     |grs000.........000|
-#	---------------------------------------------------------
-#	<-(32 - n)-><-(n)-><-(32 - n)-><-(n)-><-(32 - n)-><-(n)->
-#	\	   \		      \			 \
-#	 \	    \		       \		  \
-#	  \	     \			\		   \
-#	   \	      \			 \		    \
-#	    \	       \		  \		     \
-#	     \		\		   \		      \
-#	      \		 \		    \		       \
-#	       \	  \		     \			\
-#	<-(n)-><-(32 - n)-><------(32)-------><------(32)------->
-#	---------------------------------------------------------
-#	|0.....0| NEW_HI  |  NEW_FTEMP_LO     |grs		|
-#	---------------------------------------------------------
-#
-case_1:
-	mov.l		%d2, -(%sp)		# create temp storage
-
-	mov.w		%d0, FTEMP_EX(%a0)	# exponent = denorm threshold
-	mov.l		&32, %d0
-	sub.w		%d1, %d0		# %d0 = 32 - %d1
-
-	cmpi.w		%d1, &29		# is shft amt >= 29
-	blt.b		case1_extract		# no; no fix needed
-	mov.b		GRS(%a6), %d2
-	or.b		%d2, 3+FTEMP_LO2(%a6)
-
-case1_extract:
-	bfextu		FTEMP_HI(%a0){&0:%d0}, %d2 # %d2 = new FTEMP_HI
-	bfextu		FTEMP_HI(%a0){%d0:&32}, %d1 # %d1 = new FTEMP_LO
-	bfextu		FTEMP_LO2(%a6){%d0:&32}, %d0 # %d0 = new G,R,S
-
-	mov.l		%d2, FTEMP_HI(%a0)	# store new FTEMP_HI
-	mov.l		%d1, FTEMP_LO(%a0)	# store new FTEMP_LO
-
-	bftst		%d0{&2:&30}		# were bits shifted off?
-	beq.b		case1_sticky_clear	# no; go finish
-	bset		&rnd_stky_bit, %d0	# yes; set sticky bit
-
-case1_sticky_clear:
-	and.l		&0xe0000000, %d0	# clear all but G,R,S
-	mov.l		(%sp)+, %d2		# restore temp register
-	rts
-
-#
-# case (32<=d1<64)
-#
-# %d0 = denorm threshold
-# %d1 = "n" = amt to shift
-#
-#	---------------------------------------------------------
-#	|     FTEMP_HI	  |	FTEMP_LO     |grs000.........000|
-#	---------------------------------------------------------
-#	<-(32 - n)-><-(n)-><-(32 - n)-><-(n)-><-(32 - n)-><-(n)->
-#	\	   \		      \
-#	 \	    \		       \
-#	  \	     \			-------------------
-#	   \	      --------------------		   \
-#	    -------------------		  \		    \
-#			       \	   \		     \
-#				\	    \		      \
-#				 \	     \		       \
-#	<-------(32)------><-(n)-><-(32 - n)-><------(32)------->
-#	---------------------------------------------------------
-#	|0...............0|0....0| NEW_LO     |grs		|
-#	---------------------------------------------------------
-#
-case_2:
-	mov.l		%d2, -(%sp)		# create temp storage
-
-	mov.w		%d0, FTEMP_EX(%a0)	# exponent = denorm threshold
-	subi.w		&0x20, %d1		# %d1 now between 0 and 32
-	mov.l		&0x20, %d0
-	sub.w		%d1, %d0		# %d0 = 32 - %d1
-
-# subtle step here; or in the g,r,s at the bottom of FTEMP_LO to minimize
-# the number of bits to check for the sticky detect.
-# it only plays a role in shift amounts of 61-63.
-	mov.b		GRS(%a6), %d2
-	or.b		%d2, 3+FTEMP_LO2(%a6)
-
-	bfextu		FTEMP_HI(%a0){&0:%d0}, %d2 # %d2 = new FTEMP_LO
-	bfextu		FTEMP_HI(%a0){%d0:&32}, %d1 # %d1 = new G,R,S
-
-	bftst		%d1{&2:&30}		# were any bits shifted off?
-	bne.b		case2_set_sticky	# yes; set sticky bit
-	bftst		FTEMP_LO2(%a6){%d0:&31}	# were any bits shifted off?
-	bne.b		case2_set_sticky	# yes; set sticky bit
-
-	mov.l		%d1, %d0		# move new G,R,S to %d0
-	bra.b		case2_end
-
-case2_set_sticky:
-	mov.l		%d1, %d0		# move new G,R,S to %d0
-	bset		&rnd_stky_bit, %d0	# set sticky bit
-
-case2_end:
-	clr.l		FTEMP_HI(%a0)		# store FTEMP_HI = 0
-	mov.l		%d2, FTEMP_LO(%a0)	# store FTEMP_LO
-	and.l		&0xe0000000, %d0	# clear all but G,R,S
-
-	mov.l		(%sp)+,%d2		# restore temp register
-	rts
-
-#
-# case (d1>=64)
-#
-# %d0 = denorm threshold
-# %d1 = amt to shift
-#
-case_3:
-	mov.w		%d0, FTEMP_EX(%a0)	# insert denorm threshold
-
-	cmpi.w		%d1, &65		# is shift amt > 65?
-	blt.b		case3_64		# no; it's == 64
-	beq.b		case3_65		# no; it's == 65
-
-#
-# case (d1>65)
-#
-# Shift value is > 65 and out of range. All bits are shifted off.
-# Return a zero mantissa with the sticky bit set
-#
-	clr.l		FTEMP_HI(%a0)		# clear hi(mantissa)
-	clr.l		FTEMP_LO(%a0)		# clear lo(mantissa)
-	mov.l		&0x20000000, %d0	# set sticky bit
-	rts
-
-#
-# case (d1 == 64)
-#
-#	---------------------------------------------------------
-#	|     FTEMP_HI	  |	FTEMP_LO     |grs000.........000|
-#	---------------------------------------------------------
-#	<-------(32)------>
-#	\		   \
-#	 \		    \
-#	  \		     \
-#	   \		      ------------------------------
-#	    -------------------------------		    \
-#					   \		     \
-#					    \		      \
-#					     \		       \
-#					      <-------(32)------>
-#	---------------------------------------------------------
-#	|0...............0|0................0|grs		|
-#	---------------------------------------------------------
-#
-case3_64:
-	mov.l		FTEMP_HI(%a0), %d0	# fetch hi(mantissa)
-	mov.l		%d0, %d1		# make a copy
-	and.l		&0xc0000000, %d0	# extract G,R
-	and.l		&0x3fffffff, %d1	# extract other bits
-
-	bra.b		case3_complete
-
-#
-# case (d1 == 65)
-#
-#	---------------------------------------------------------
-#	|     FTEMP_HI	  |	FTEMP_LO     |grs000.........000|
-#	---------------------------------------------------------
-#	<-------(32)------>
-#	\		   \
-#	 \		    \
-#	  \		     \
-#	   \		      ------------------------------
-#	    --------------------------------		    \
-#					    \		     \
-#					     \		      \
-#					      \		       \
-#					       <-------(31)----->
-#	---------------------------------------------------------
-#	|0...............0|0................0|0rs		|
-#	---------------------------------------------------------
-#
-case3_65:
-	mov.l		FTEMP_HI(%a0), %d0	# fetch hi(mantissa)
-	and.l		&0x80000000, %d0	# extract R bit
-	lsr.l		&0x1, %d0		# shift high bit into R bit
-	and.l		&0x7fffffff, %d1	# extract other bits
-
-case3_complete:
-# last operation done was an "and" of the bits shifted off so the condition
-# codes are already set so branch accordingly.
-	bne.b		case3_set_sticky	# yes; go set new sticky
-	tst.l		FTEMP_LO(%a0)		# were any bits shifted off?
-	bne.b		case3_set_sticky	# yes; go set new sticky
-	tst.b		GRS(%a6)		# were any bits shifted off?
-	bne.b		case3_set_sticky	# yes; go set new sticky
-
-#
-# no bits were shifted off so don't set the sticky bit.
-# the guard and
-# the entire mantissa is zero.
-#
-	clr.l		FTEMP_HI(%a0)		# clear hi(mantissa)
-	clr.l		FTEMP_LO(%a0)		# clear lo(mantissa)
-	rts
-
-#
-# some bits were shifted off so set the sticky bit.
-# the entire mantissa is zero.
-#
-case3_set_sticky:
-	bset		&rnd_stky_bit,%d0	# set new sticky bit
-	clr.l		FTEMP_HI(%a0)		# clear hi(mantissa)
-	clr.l		FTEMP_LO(%a0)		# clear lo(mantissa)
-	rts
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	_round(): round result according to precision/mode		#
-#									#
-# XREF ****************************************************************	#
-#	None								#
-#									#
-# INPUT ***************************************************************	#
-#	a0	  = ptr to input operand in internal extended format	#
-#	d1(hi)    = contains rounding precision:			#
-#			ext = $0000xxxx					#
-#			sgl = $0004xxxx					#
-#			dbl = $0008xxxx					#
-#	d1(lo)	  = contains rounding mode:				#
-#			RN  = $xxxx0000					#
-#			RZ  = $xxxx0001					#
-#			RM  = $xxxx0002					#
-#			RP  = $xxxx0003					#
-#	d0{31:29} = contains the g,r,s bits (extended)			#
-#									#
-# OUTPUT **************************************************************	#
-#	a0 = pointer to rounded result					#
-#									#
-# ALGORITHM ***********************************************************	#
-#	On return the value pointed to by a0 is correctly rounded,	#
-#	a0 is preserved and the g-r-s bits in d0 are cleared.		#
-#	The result is not typed - the tag field is invalid.  The	#
-#	result is still in the internal extended format.		#
-#									#
-#	The INEX bit of USER_FPSR will be set if the rounded result was	#
-#	inexact (i.e. if any of the g-r-s bits were set).		#
-#									#
-#########################################################################
-
-	global		_round
-_round:
-#
-# ext_grs() looks at the rounding precision and sets the appropriate
-# G,R,S bits.
-# If (G,R,S == 0) then result is exact and round is done, else set
-# the inex flag in status reg and continue.
-#
-	bsr.l		ext_grs			# extract G,R,S
-
-	tst.l		%d0			# are G,R,S zero?
-	beq.w		truncate		# yes; round is complete
-
-	or.w		&inx2a_mask, 2+USER_FPSR(%a6) # set inex2/ainex
-
-#
-# Use rounding mode as an index into a jump table for these modes.
-# All of the following assumes grs != 0.
-#
-	mov.w		(tbl_mode.b,%pc,%d1.w*2), %a1 # load jump offset
-	jmp		(tbl_mode.b,%pc,%a1)	# jmp to rnd mode handler
-
-tbl_mode:
-	short		rnd_near - tbl_mode
-	short		truncate - tbl_mode	# RZ always truncates
-	short		rnd_mnus - tbl_mode
-	short		rnd_plus - tbl_mode
-
-#################################################################
-#	ROUND PLUS INFINITY					#
-#								#
-#	If sign of fp number = 0 (positive), then add 1 to l.	#
-#################################################################
-rnd_plus:
-	tst.b		FTEMP_SGN(%a0)		# check for sign
-	bmi.w		truncate		# if positive then truncate
-
-	mov.l		&0xffffffff, %d0	# force g,r,s to be all f's
-	swap		%d1			# set up d1 for round prec.
-
-	cmpi.b		%d1, &s_mode		# is prec = sgl?
-	beq.w		add_sgl			# yes
-	bgt.w		add_dbl			# no; it's dbl
-	bra.w		add_ext			# no; it's ext
-
-#################################################################
-#	ROUND MINUS INFINITY					#
-#								#
-#	If sign of fp number = 1 (negative), then add 1 to l.	#
-#################################################################
-rnd_mnus:
-	tst.b		FTEMP_SGN(%a0)		# check for sign
-	bpl.w		truncate		# if negative then truncate
-
-	mov.l		&0xffffffff, %d0	# force g,r,s to be all f's
-	swap		%d1			# set up d1 for round prec.
-
-	cmpi.b		%d1, &s_mode		# is prec = sgl?
-	beq.w		add_sgl			# yes
-	bgt.w		add_dbl			# no; it's dbl
-	bra.w		add_ext			# no; it's ext
-
-#################################################################
-#	ROUND NEAREST						#
-#								#
-#	If (g=1), then add 1 to l and if (r=s=0), then clear l	#
-#	Note that this will round to even in case of a tie.	#
-#################################################################
-rnd_near:
-	asl.l		&0x1, %d0		# shift g-bit to c-bit
-	bcc.w		truncate		# if (g=1) then
-
-	swap		%d1			# set up d1 for round prec.
-
-	cmpi.b		%d1, &s_mode		# is prec = sgl?
-	beq.w		add_sgl			# yes
-	bgt.w		add_dbl			# no; it's dbl
-	bra.w		add_ext			# no; it's ext
-
-# *** LOCAL EQUATES ***
-set	ad_1_sgl,	0x00000100	# constant to add 1 to l-bit in sgl prec
-set	ad_1_dbl,	0x00000800	# constant to add 1 to l-bit in dbl prec
-
-#########################
-#	ADD SINGLE	#
-#########################
-add_sgl:
-	add.l		&ad_1_sgl, FTEMP_HI(%a0)
-	bcc.b		scc_clr			# no mantissa overflow
-	roxr.w		FTEMP_HI(%a0)		# shift v-bit back in
-	roxr.w		FTEMP_HI+2(%a0)		# shift v-bit back in
-	add.w		&0x1, FTEMP_EX(%a0)	# and incr exponent
-scc_clr:
-	tst.l		%d0			# test for rs = 0
-	bne.b		sgl_done
-	and.w		&0xfe00, FTEMP_HI+2(%a0) # clear the l-bit
-sgl_done:
-	and.l		&0xffffff00, FTEMP_HI(%a0) # truncate bits beyond sgl limit
-	clr.l		FTEMP_LO(%a0)		# clear d2
-	rts
-
-#########################
-#	ADD EXTENDED	#
-#########################
-add_ext:
-	addq.l		&1,FTEMP_LO(%a0)	# add 1 to l-bit
-	bcc.b		xcc_clr			# test for carry out
-	addq.l		&1,FTEMP_HI(%a0)	# propagate carry
-	bcc.b		xcc_clr
-	roxr.w		FTEMP_HI(%a0)		# mant is 0 so restore v-bit
-	roxr.w		FTEMP_HI+2(%a0)		# mant is 0 so restore v-bit
-	roxr.w		FTEMP_LO(%a0)
-	roxr.w		FTEMP_LO+2(%a0)
-	add.w		&0x1,FTEMP_EX(%a0)	# and inc exp
-xcc_clr:
-	tst.l		%d0			# test rs = 0
-	bne.b		add_ext_done
-	and.b		&0xfe,FTEMP_LO+3(%a0)	# clear the l bit
-add_ext_done:
-	rts
-
-#########################
-#	ADD DOUBLE	#
-#########################
-add_dbl:
-	add.l		&ad_1_dbl, FTEMP_LO(%a0) # add 1 to lsb
-	bcc.b		dcc_clr			# no carry
-	addq.l		&0x1, FTEMP_HI(%a0)	# propagate carry
-	bcc.b		dcc_clr			# no carry
-
-	roxr.w		FTEMP_HI(%a0)		# mant is 0 so restore v-bit
-	roxr.w		FTEMP_HI+2(%a0)		# mant is 0 so restore v-bit
-	roxr.w		FTEMP_LO(%a0)
-	roxr.w		FTEMP_LO+2(%a0)
-	addq.w		&0x1, FTEMP_EX(%a0)	# incr exponent
-dcc_clr:
-	tst.l		%d0			# test for rs = 0
-	bne.b		dbl_done
-	and.w		&0xf000, FTEMP_LO+2(%a0) # clear the l-bit
-
-dbl_done:
-	and.l		&0xfffff800,FTEMP_LO(%a0) # truncate bits beyond dbl limit
-	rts
-
-###########################
-# Truncate all other bits #
-###########################
-truncate:
-	swap		%d1			# select rnd prec
-
-	cmpi.b		%d1, &s_mode		# is prec sgl?
-	beq.w		sgl_done		# yes
-	bgt.b		dbl_done		# no; it's dbl
-	rts					# no; it's ext
-
-
-#
-# ext_grs(): extract guard, round and sticky bits according to
-#	     rounding precision.
-#
-# INPUT
-#	d0	   = extended precision g,r,s (in d0{31:29})
-#	d1	   = {PREC,ROUND}
-# OUTPUT
-#	d0{31:29}  = guard, round, sticky
-#
-# The ext_grs extract the guard/round/sticky bits according to the
-# selected rounding precision. It is called by the round subroutine
-# only.  All registers except d0 are kept intact. d0 becomes an
-# updated guard,round,sticky in d0{31:29}
-#
-# Notes: the ext_grs uses the round PREC, and therefore has to swap d1
-#	 prior to usage, and needs to restore d1 to original. this
-#	 routine is tightly tied to the round routine and not meant to
-#	 uphold standard subroutine calling practices.
-#
-
-ext_grs:
-	swap		%d1			# have d1.w point to round precision
-	tst.b		%d1			# is rnd prec = extended?
-	bne.b		ext_grs_not_ext		# no; go handle sgl or dbl
-
-#
-# %d0 actually already hold g,r,s since _round() had it before calling
-# this function. so, as long as we don't disturb it, we are "returning" it.
-#
-ext_grs_ext:
-	swap		%d1			# yes; return to correct positions
-	rts
-
-ext_grs_not_ext:
-	movm.l		&0x3000, -(%sp)		# make some temp registers {d2/d3}
-
-	cmpi.b		%d1, &s_mode		# is rnd prec = sgl?
-	bne.b		ext_grs_dbl		# no; go handle dbl
-
-#
-# sgl:
-#	96		64	  40	32		0
-#	-----------------------------------------------------
-#	| EXP	|XXXXXXX|	  |xx	|		|grs|
-#	-----------------------------------------------------
-#			<--(24)--->nn\			   /
-#				   ee ---------------------
-#				   ww		|
-#						v
-#				   gr	   new sticky
-#
-ext_grs_sgl:
-	bfextu		FTEMP_HI(%a0){&24:&2}, %d3 # sgl prec. g-r are 2 bits right
-	mov.l		&30, %d2		# of the sgl prec. limits
-	lsl.l		%d2, %d3		# shift g-r bits to MSB of d3
-	mov.l		FTEMP_HI(%a0), %d2	# get word 2 for s-bit test
-	and.l		&0x0000003f, %d2	# s bit is the or of all other
-	bne.b		ext_grs_st_stky		# bits to the right of g-r
-	tst.l		FTEMP_LO(%a0)		# test lower mantissa
-	bne.b		ext_grs_st_stky		# if any are set, set sticky
-	tst.l		%d0			# test original g,r,s
-	bne.b		ext_grs_st_stky		# if any are set, set sticky
-	bra.b		ext_grs_end_sd		# if words 3 and 4 are clr, exit
-
-#
-# dbl:
-#	96		64		32	 11	0
-#	-----------------------------------------------------
-#	| EXP	|XXXXXXX|		|	 |xx	|grs|
-#	-----------------------------------------------------
-#						  nn\	    /
-#						  ee -------
-#						  ww	|
-#							v
-#						  gr	new sticky
-#
-ext_grs_dbl:
-	bfextu		FTEMP_LO(%a0){&21:&2}, %d3 # dbl-prec. g-r are 2 bits right
-	mov.l		&30, %d2		# of the dbl prec. limits
-	lsl.l		%d2, %d3		# shift g-r bits to the MSB of d3
-	mov.l		FTEMP_LO(%a0), %d2	# get lower mantissa  for s-bit test
-	and.l		&0x000001ff, %d2	# s bit is the or-ing of all
-	bne.b		ext_grs_st_stky		# other bits to the right of g-r
-	tst.l		%d0			# test word original g,r,s
-	bne.b		ext_grs_st_stky		# if any are set, set sticky
-	bra.b		ext_grs_end_sd		# if clear, exit
-
-ext_grs_st_stky:
-	bset		&rnd_stky_bit, %d3	# set sticky bit
-ext_grs_end_sd:
-	mov.l		%d3, %d0		# return grs to d0
-
-	movm.l		(%sp)+, &0xc		# restore scratch registers {d2/d3}
-
-	swap		%d1			# restore d1 to original
-	rts
-
-#########################################################################
-# norm(): normalize the mantissa of an extended precision input. the	#
-#	  input operand should not be normalized already.		#
-#									#
-# XDEF ****************************************************************	#
-#	norm()								#
-#									#
-# XREF **************************************************************** #
-#	none								#
-#									#
-# INPUT *************************************************************** #
-#	a0 = pointer fp extended precision operand to normalize		#
-#									#
-# OUTPUT ************************************************************** #
-#	d0 = number of bit positions the mantissa was shifted		#
-#	a0 = the input operand's mantissa is normalized; the exponent	#
-#	     is unchanged.						#
-#									#
-#########################################################################
-	global		norm
-norm:
-	mov.l		%d2, -(%sp)		# create some temp regs
-	mov.l		%d3, -(%sp)
-
-	mov.l		FTEMP_HI(%a0), %d0	# load hi(mantissa)
-	mov.l		FTEMP_LO(%a0), %d1	# load lo(mantissa)
-
-	bfffo		%d0{&0:&32}, %d2	# how many places to shift?
-	beq.b		norm_lo			# hi(man) is all zeroes!
-
-norm_hi:
-	lsl.l		%d2, %d0		# left shift hi(man)
-	bfextu		%d1{&0:%d2}, %d3	# extract lo bits
-
-	or.l		%d3, %d0		# create hi(man)
-	lsl.l		%d2, %d1		# create lo(man)
-
-	mov.l		%d0, FTEMP_HI(%a0)	# store new hi(man)
-	mov.l		%d1, FTEMP_LO(%a0)	# store new lo(man)
-
-	mov.l		%d2, %d0		# return shift amount
-
-	mov.l		(%sp)+, %d3		# restore temp regs
-	mov.l		(%sp)+, %d2
-
-	rts
-
-norm_lo:
-	bfffo		%d1{&0:&32}, %d2	# how many places to shift?
-	lsl.l		%d2, %d1		# shift lo(man)
-	add.l		&32, %d2		# add 32 to shft amount
-
-	mov.l		%d1, FTEMP_HI(%a0)	# store hi(man)
-	clr.l		FTEMP_LO(%a0)		# lo(man) is now zero
-
-	mov.l		%d2, %d0		# return shift amount
-
-	mov.l		(%sp)+, %d3		# restore temp regs
-	mov.l		(%sp)+, %d2
-
-	rts
-
-#########################################################################
-# unnorm_fix(): - changes an UNNORM to one of NORM, DENORM, or ZERO	#
-#		- returns corresponding optype tag			#
-#									#
-# XDEF ****************************************************************	#
-#	unnorm_fix()							#
-#									#
-# XREF **************************************************************** #
-#	norm() - normalize the mantissa					#
-#									#
-# INPUT *************************************************************** #
-#	a0 = pointer to unnormalized extended precision number		#
-#									#
-# OUTPUT ************************************************************** #
-#	d0 = optype tag - is corrected to one of NORM, DENORM, or ZERO	#
-#	a0 = input operand has been converted to a norm, denorm, or	#
-#	     zero; both the exponent and mantissa are changed.		#
-#									#
-#########################################################################
-
-	global		unnorm_fix
-unnorm_fix:
-	bfffo		FTEMP_HI(%a0){&0:&32}, %d0 # how many shifts are needed?
-	bne.b		unnorm_shift		# hi(man) is not all zeroes
-
-#
-# hi(man) is all zeroes so see if any bits in lo(man) are set
-#
-unnorm_chk_lo:
-	bfffo		FTEMP_LO(%a0){&0:&32}, %d0 # is operand really a zero?
-	beq.w		unnorm_zero		# yes
-
-	add.w		&32, %d0		# no; fix shift distance
-
-#
-# d0 = # shifts needed for complete normalization
-#
-unnorm_shift:
-	clr.l		%d1			# clear top word
-	mov.w		FTEMP_EX(%a0), %d1	# extract exponent
-	and.w		&0x7fff, %d1		# strip off sgn
-
-	cmp.w		%d0, %d1		# will denorm push exp < 0?
-	bgt.b		unnorm_nrm_zero		# yes; denorm only until exp = 0
-
-#
-# exponent would not go < 0. Therefore, number stays normalized
-#
-	sub.w		%d0, %d1		# shift exponent value
-	mov.w		FTEMP_EX(%a0), %d0	# load old exponent
-	and.w		&0x8000, %d0		# save old sign
-	or.w		%d0, %d1		# {sgn,new exp}
-	mov.w		%d1, FTEMP_EX(%a0)	# insert new exponent
-
-	bsr.l		norm			# normalize UNNORM
-
-	mov.b		&NORM, %d0		# return new optype tag
-	rts
-
-#
-# exponent would go < 0, so only denormalize until exp = 0
-#
-unnorm_nrm_zero:
-	cmp.b		%d1, &32		# is exp <= 32?
-	bgt.b		unnorm_nrm_zero_lrg	# no; go handle large exponent
-
-	bfextu		FTEMP_HI(%a0){%d1:&32}, %d0 # extract new hi(man)
-	mov.l		%d0, FTEMP_HI(%a0)	# save new hi(man)
-
-	mov.l		FTEMP_LO(%a0), %d0	# fetch old lo(man)
-	lsl.l		%d1, %d0		# extract new lo(man)
-	mov.l		%d0, FTEMP_LO(%a0)	# save new lo(man)
-
-	and.w		&0x8000, FTEMP_EX(%a0)	# set exp = 0
-
-	mov.b		&DENORM, %d0		# return new optype tag
-	rts
-
-#
-# only mantissa bits set are in lo(man)
-#
-unnorm_nrm_zero_lrg:
-	sub.w		&32, %d1		# adjust shft amt by 32
-
-	mov.l		FTEMP_LO(%a0), %d0	# fetch old lo(man)
-	lsl.l		%d1, %d0		# left shift lo(man)
-
-	mov.l		%d0, FTEMP_HI(%a0)	# store new hi(man)
-	clr.l		FTEMP_LO(%a0)		# lo(man) = 0
-
-	and.w		&0x8000, FTEMP_EX(%a0)	# set exp = 0
-
-	mov.b		&DENORM, %d0		# return new optype tag
-	rts
-
-#
-# whole mantissa is zero so this UNNORM is actually a zero
-#
-unnorm_zero:
-	and.w		&0x8000, FTEMP_EX(%a0)	# force exponent to zero
-
-	mov.b		&ZERO, %d0		# fix optype tag
-	rts
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	set_tag_x(): return the optype of the input ext fp number	#
-#									#
-# XREF ****************************************************************	#
-#	None								#
-#									#
-# INPUT ***************************************************************	#
-#	a0 = pointer to extended precision operand			#
-#									#
-# OUTPUT **************************************************************	#
-#	d0 = value of type tag						#
-#		one of: NORM, INF, QNAN, SNAN, DENORM, UNNORM, ZERO	#
-#									#
-# ALGORITHM ***********************************************************	#
-#	Simply test the exponent, j-bit, and mantissa values to		#
-# determine the type of operand.					#
-#	If it's an unnormalized zero, alter the operand and force it	#
-# to be a normal zero.							#
-#									#
-#########################################################################
-
-	global		set_tag_x
-set_tag_x:
-	mov.w		FTEMP_EX(%a0), %d0	# extract exponent
-	andi.w		&0x7fff, %d0		# strip off sign
-	cmpi.w		%d0, &0x7fff		# is (EXP == MAX)?
-	beq.b		inf_or_nan_x
-not_inf_or_nan_x:
-	btst		&0x7,FTEMP_HI(%a0)
-	beq.b		not_norm_x
-is_norm_x:
-	mov.b		&NORM, %d0
-	rts
-not_norm_x:
-	tst.w		%d0			# is exponent = 0?
-	bne.b		is_unnorm_x
-not_unnorm_x:
-	tst.l		FTEMP_HI(%a0)
-	bne.b		is_denorm_x
-	tst.l		FTEMP_LO(%a0)
-	bne.b		is_denorm_x
-is_zero_x:
-	mov.b		&ZERO, %d0
-	rts
-is_denorm_x:
-	mov.b		&DENORM, %d0
-	rts
-# must distinguish now "Unnormalized zeroes" which we
-# must convert to zero.
-is_unnorm_x:
-	tst.l		FTEMP_HI(%a0)
-	bne.b		is_unnorm_reg_x
-	tst.l		FTEMP_LO(%a0)
-	bne.b		is_unnorm_reg_x
-# it's an "unnormalized zero". let's convert it to an actual zero...
-	andi.w		&0x8000,FTEMP_EX(%a0)	# clear exponent
-	mov.b		&ZERO, %d0
-	rts
-is_unnorm_reg_x:
-	mov.b		&UNNORM, %d0
-	rts
-inf_or_nan_x:
-	tst.l		FTEMP_LO(%a0)
-	bne.b		is_nan_x
-	mov.l		FTEMP_HI(%a0), %d0
-	and.l		&0x7fffffff, %d0	# msb is a don't care!
-	bne.b		is_nan_x
-is_inf_x:
-	mov.b		&INF, %d0
-	rts
-is_nan_x:
-	btst		&0x6, FTEMP_HI(%a0)
-	beq.b		is_snan_x
-	mov.b		&QNAN, %d0
-	rts
-is_snan_x:
-	mov.b		&SNAN, %d0
-	rts
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	set_tag_d(): return the optype of the input dbl fp number	#
-#									#
-# XREF ****************************************************************	#
-#	None								#
-#									#
-# INPUT ***************************************************************	#
-#	a0 = points to double precision operand				#
-#									#
-# OUTPUT **************************************************************	#
-#	d0 = value of type tag						#
-#		one of: NORM, INF, QNAN, SNAN, DENORM, ZERO		#
-#									#
-# ALGORITHM ***********************************************************	#
-#	Simply test the exponent, j-bit, and mantissa values to		#
-# determine the type of operand.					#
-#									#
-#########################################################################
-
-	global		set_tag_d
-set_tag_d:
-	mov.l		FTEMP(%a0), %d0
-	mov.l		%d0, %d1
-
-	andi.l		&0x7ff00000, %d0
-	beq.b		zero_or_denorm_d
-
-	cmpi.l		%d0, &0x7ff00000
-	beq.b		inf_or_nan_d
-
-is_norm_d:
-	mov.b		&NORM, %d0
-	rts
-zero_or_denorm_d:
-	and.l		&0x000fffff, %d1
-	bne		is_denorm_d
-	tst.l		4+FTEMP(%a0)
-	bne		is_denorm_d
-is_zero_d:
-	mov.b		&ZERO, %d0
-	rts
-is_denorm_d:
-	mov.b		&DENORM, %d0
-	rts
-inf_or_nan_d:
-	and.l		&0x000fffff, %d1
-	bne		is_nan_d
-	tst.l		4+FTEMP(%a0)
-	bne		is_nan_d
-is_inf_d:
-	mov.b		&INF, %d0
-	rts
-is_nan_d:
-	btst		&19, %d1
-	bne		is_qnan_d
-is_snan_d:
-	mov.b		&SNAN, %d0
-	rts
-is_qnan_d:
-	mov.b		&QNAN, %d0
-	rts
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	set_tag_s(): return the optype of the input sgl fp number	#
-#									#
-# XREF ****************************************************************	#
-#	None								#
-#									#
-# INPUT ***************************************************************	#
-#	a0 = pointer to single precision operand			#
-#									#
-# OUTPUT **************************************************************	#
-#	d0 = value of type tag						#
-#		one of: NORM, INF, QNAN, SNAN, DENORM, ZERO		#
-#									#
-# ALGORITHM ***********************************************************	#
-#	Simply test the exponent, j-bit, and mantissa values to		#
-# determine the type of operand.					#
-#									#
-#########################################################################
-
-	global		set_tag_s
-set_tag_s:
-	mov.l		FTEMP(%a0), %d0
-	mov.l		%d0, %d1
-
-	andi.l		&0x7f800000, %d0
-	beq.b		zero_or_denorm_s
-
-	cmpi.l		%d0, &0x7f800000
-	beq.b		inf_or_nan_s
-
-is_norm_s:
-	mov.b		&NORM, %d0
-	rts
-zero_or_denorm_s:
-	and.l		&0x007fffff, %d1
-	bne		is_denorm_s
-is_zero_s:
-	mov.b		&ZERO, %d0
-	rts
-is_denorm_s:
-	mov.b		&DENORM, %d0
-	rts
-inf_or_nan_s:
-	and.l		&0x007fffff, %d1
-	bne		is_nan_s
-is_inf_s:
-	mov.b		&INF, %d0
-	rts
-is_nan_s:
-	btst		&22, %d1
-	bne		is_qnan_s
-is_snan_s:
-	mov.b		&SNAN, %d0
-	rts
-is_qnan_s:
-	mov.b		&QNAN, %d0
-	rts
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	unf_res(): routine to produce default underflow result of a	#
-#		   scaled extended precision number; this is used by	#
-#		   fadd/fdiv/fmul/etc. emulation routines.		#
-#	unf_res4(): same as above but for fsglmul/fsgldiv which use	#
-#		    single round prec and extended prec mode.		#
-#									#
-# XREF ****************************************************************	#
-#	_denorm() - denormalize according to scale factor		#
-#	_round() - round denormalized number according to rnd prec	#
-#									#
-# INPUT ***************************************************************	#
-#	a0 = pointer to extended precison operand			#
-#	d0 = scale factor						#
-#	d1 = rounding precision/mode					#
-#									#
-# OUTPUT **************************************************************	#
-#	a0 = pointer to default underflow result in extended precision	#
-#	d0.b = result FPSR_cc which caller may or may not want to save	#
-#									#
-# ALGORITHM ***********************************************************	#
-#	Convert the input operand to "internal format" which means the	#
-# exponent is extended to 16 bits and the sign is stored in the unused	#
-# portion of the extended precison operand. Denormalize the number	#
-# according to the scale factor passed in d0. Then, round the		#
-# denormalized result.							#
-#	Set the FPSR_exc bits as appropriate but return the cc bits in	#
-# d0 in case the caller doesn't want to save them (as is the case for	#
-# fmove out).								#
-#	unf_res4() for fsglmul/fsgldiv forces the denorm to extended	#
-# precision and the rounding mode to single.				#
-#									#
-#########################################################################
-	global		unf_res
-unf_res:
-	mov.l		%d1, -(%sp)		# save rnd prec,mode on stack
-
-	btst		&0x7, FTEMP_EX(%a0)	# make "internal" format
-	sne		FTEMP_SGN(%a0)
-
-	mov.w		FTEMP_EX(%a0), %d1	# extract exponent
-	and.w		&0x7fff, %d1
-	sub.w		%d0, %d1
-	mov.w		%d1, FTEMP_EX(%a0)	# insert 16 bit exponent
-
-	mov.l		%a0, -(%sp)		# save operand ptr during calls
-
-	mov.l		0x4(%sp),%d0		# pass rnd prec.
-	andi.w		&0x00c0,%d0
-	lsr.w		&0x4,%d0
-	bsr.l		_denorm			# denorm result
-
-	mov.l		(%sp),%a0
-	mov.w		0x6(%sp),%d1		# load prec:mode into %d1
-	andi.w		&0xc0,%d1		# extract rnd prec
-	lsr.w		&0x4,%d1
-	swap		%d1
-	mov.w		0x6(%sp),%d1
-	andi.w		&0x30,%d1
-	lsr.w		&0x4,%d1
-	bsr.l		_round			# round the denorm
-
-	mov.l		(%sp)+, %a0
-
-# result is now rounded properly. convert back to normal format
-	bclr		&0x7, FTEMP_EX(%a0)	# clear sgn first; may have residue
-	tst.b		FTEMP_SGN(%a0)		# is "internal result" sign set?
-	beq.b		unf_res_chkifzero	# no; result is positive
-	bset		&0x7, FTEMP_EX(%a0)	# set result sgn
-	clr.b		FTEMP_SGN(%a0)		# clear temp sign
-
-# the number may have become zero after rounding. set ccodes accordingly.
-unf_res_chkifzero:
-	clr.l		%d0
-	tst.l		FTEMP_HI(%a0)		# is value now a zero?
-	bne.b		unf_res_cont		# no
-	tst.l		FTEMP_LO(%a0)
-	bne.b		unf_res_cont		# no
-#	bset		&z_bit, FPSR_CC(%a6)	# yes; set zero ccode bit
-	bset		&z_bit, %d0		# yes; set zero ccode bit
-
-unf_res_cont:
-
-#
-# can inex1 also be set along with unfl and inex2???
-#
-# we know that underflow has occurred. aunfl should be set if INEX2 is also set.
-#
-	btst		&inex2_bit, FPSR_EXCEPT(%a6) # is INEX2 set?
-	beq.b		unf_res_end		# no
-	bset		&aunfl_bit, FPSR_AEXCEPT(%a6) # yes; set aunfl
-
-unf_res_end:
-	add.l		&0x4, %sp		# clear stack
-	rts
-
-# unf_res() for fsglmul() and fsgldiv().
-	global		unf_res4
-unf_res4:
-	mov.l		%d1,-(%sp)		# save rnd prec,mode on stack
-
-	btst		&0x7,FTEMP_EX(%a0)	# make "internal" format
-	sne		FTEMP_SGN(%a0)
-
-	mov.w		FTEMP_EX(%a0),%d1	# extract exponent
-	and.w		&0x7fff,%d1
-	sub.w		%d0,%d1
-	mov.w		%d1,FTEMP_EX(%a0)	# insert 16 bit exponent
-
-	mov.l		%a0,-(%sp)		# save operand ptr during calls
-
-	clr.l		%d0			# force rnd prec = ext
-	bsr.l		_denorm			# denorm result
-
-	mov.l		(%sp),%a0
-	mov.w		&s_mode,%d1		# force rnd prec = sgl
-	swap		%d1
-	mov.w		0x6(%sp),%d1		# load rnd mode
-	andi.w		&0x30,%d1		# extract rnd prec
-	lsr.w		&0x4,%d1
-	bsr.l		_round			# round the denorm
-
-	mov.l		(%sp)+,%a0
-
-# result is now rounded properly. convert back to normal format
-	bclr		&0x7,FTEMP_EX(%a0)	# clear sgn first; may have residue
-	tst.b		FTEMP_SGN(%a0)		# is "internal result" sign set?
-	beq.b		unf_res4_chkifzero	# no; result is positive
-	bset		&0x7,FTEMP_EX(%a0)	# set result sgn
-	clr.b		FTEMP_SGN(%a0)		# clear temp sign
-
-# the number may have become zero after rounding. set ccodes accordingly.
-unf_res4_chkifzero:
-	clr.l		%d0
-	tst.l		FTEMP_HI(%a0)		# is value now a zero?
-	bne.b		unf_res4_cont		# no
-	tst.l		FTEMP_LO(%a0)
-	bne.b		unf_res4_cont		# no
-#	bset		&z_bit,FPSR_CC(%a6)	# yes; set zero ccode bit
-	bset		&z_bit,%d0		# yes; set zero ccode bit
-
-unf_res4_cont:
-
-#
-# can inex1 also be set along with unfl and inex2???
-#
-# we know that underflow has occurred. aunfl should be set if INEX2 is also set.
-#
-	btst		&inex2_bit,FPSR_EXCEPT(%a6) # is INEX2 set?
-	beq.b		unf_res4_end		# no
-	bset		&aunfl_bit,FPSR_AEXCEPT(%a6) # yes; set aunfl
-
-unf_res4_end:
-	add.l		&0x4,%sp		# clear stack
-	rts
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	ovf_res(): routine to produce the default overflow result of	#
-#		   an overflowing number.				#
-#	ovf_res2(): same as above but the rnd mode/prec are passed	#
-#		    differently.					#
-#									#
-# XREF ****************************************************************	#
-#	none								#
-#									#
-# INPUT ***************************************************************	#
-#	d1.b	= '-1' => (-); '0' => (+)				#
-#   ovf_res():								#
-#	d0	= rnd mode/prec						#
-#   ovf_res2():								#
-#	hi(d0)	= rnd prec						#
-#	lo(d0)	= rnd mode						#
-#									#
-# OUTPUT **************************************************************	#
-#	a0	= points to extended precision result			#
-#	d0.b	= condition code bits					#
-#									#
-# ALGORITHM ***********************************************************	#
-#	The default overflow result can be determined by the sign of	#
-# the result and the rounding mode/prec in effect. These bits are	#
-# concatenated together to create an index into the default result	#
-# table. A pointer to the correct result is returned in a0. The		#
-# resulting condition codes are returned in d0 in case the caller	#
-# doesn't want FPSR_cc altered (as is the case for fmove out).		#
-#									#
-#########################################################################
-
-	global		ovf_res
-ovf_res:
-	andi.w		&0x10,%d1		# keep result sign
-	lsr.b		&0x4,%d0		# shift prec/mode
-	or.b		%d0,%d1			# concat the two
-	mov.w		%d1,%d0			# make a copy
-	lsl.b		&0x1,%d1		# multiply d1 by 2
-	bra.b		ovf_res_load
-
-	global		ovf_res2
-ovf_res2:
-	and.w		&0x10, %d1		# keep result sign
-	or.b		%d0, %d1		# insert rnd mode
-	swap		%d0
-	or.b		%d0, %d1		# insert rnd prec
-	mov.w		%d1, %d0		# make a copy
-	lsl.b		&0x1, %d1		# shift left by 1
-
-#
-# use the rounding mode, precision, and result sign as in index into the
-# two tables below to fetch the default result and the result ccodes.
-#
-ovf_res_load:
-	mov.b		(tbl_ovfl_cc.b,%pc,%d0.w*1), %d0 # fetch result ccodes
-	lea		(tbl_ovfl_result.b,%pc,%d1.w*8), %a0 # return result ptr
-
-	rts
-
-tbl_ovfl_cc:
-	byte		0x2, 0x0, 0x0, 0x2
-	byte		0x2, 0x0, 0x0, 0x2
-	byte		0x2, 0x0, 0x0, 0x2
-	byte		0x0, 0x0, 0x0, 0x0
-	byte		0x2+0x8, 0x8, 0x2+0x8, 0x8
-	byte		0x2+0x8, 0x8, 0x2+0x8, 0x8
-	byte		0x2+0x8, 0x8, 0x2+0x8, 0x8
-
-tbl_ovfl_result:
-	long		0x7fff0000,0x00000000,0x00000000,0x00000000 # +INF; RN
-	long		0x7ffe0000,0xffffffff,0xffffffff,0x00000000 # +EXT; RZ
-	long		0x7ffe0000,0xffffffff,0xffffffff,0x00000000 # +EXT; RM
-	long		0x7fff0000,0x00000000,0x00000000,0x00000000 # +INF; RP
-
-	long		0x7fff0000,0x00000000,0x00000000,0x00000000 # +INF; RN
-	long		0x407e0000,0xffffff00,0x00000000,0x00000000 # +SGL; RZ
-	long		0x407e0000,0xffffff00,0x00000000,0x00000000 # +SGL; RM
-	long		0x7fff0000,0x00000000,0x00000000,0x00000000 # +INF; RP
-
-	long		0x7fff0000,0x00000000,0x00000000,0x00000000 # +INF; RN
-	long		0x43fe0000,0xffffffff,0xfffff800,0x00000000 # +DBL; RZ
-	long		0x43fe0000,0xffffffff,0xfffff800,0x00000000 # +DBL; RM
-	long		0x7fff0000,0x00000000,0x00000000,0x00000000 # +INF; RP
-
-	long		0x00000000,0x00000000,0x00000000,0x00000000
-	long		0x00000000,0x00000000,0x00000000,0x00000000
-	long		0x00000000,0x00000000,0x00000000,0x00000000
-	long		0x00000000,0x00000000,0x00000000,0x00000000
-
-	long		0xffff0000,0x00000000,0x00000000,0x00000000 # -INF; RN
-	long		0xfffe0000,0xffffffff,0xffffffff,0x00000000 # -EXT; RZ
-	long		0xffff0000,0x00000000,0x00000000,0x00000000 # -INF; RM
-	long		0xfffe0000,0xffffffff,0xffffffff,0x00000000 # -EXT; RP
-
-	long		0xffff0000,0x00000000,0x00000000,0x00000000 # -INF; RN
-	long		0xc07e0000,0xffffff00,0x00000000,0x00000000 # -SGL; RZ
-	long		0xffff0000,0x00000000,0x00000000,0x00000000 # -INF; RM
-	long		0xc07e0000,0xffffff00,0x00000000,0x00000000 # -SGL; RP
-
-	long		0xffff0000,0x00000000,0x00000000,0x00000000 # -INF; RN
-	long		0xc3fe0000,0xffffffff,0xfffff800,0x00000000 # -DBL; RZ
-	long		0xffff0000,0x00000000,0x00000000,0x00000000 # -INF; RM
-	long		0xc3fe0000,0xffffffff,0xfffff800,0x00000000 # -DBL; RP
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	get_packed(): fetch a packed operand from memory and then	#
-#		      convert it to a floating-point binary number.	#
-#									#
-# XREF ****************************************************************	#
-#	_dcalc_ea() - calculate the correct <ea>			#
-#	_mem_read() - fetch the packed operand from memory		#
-#	facc_in_x() - the fetch failed so jump to special exit code	#
-#	decbin()    - convert packed to binary extended precision	#
-#									#
-# INPUT ***************************************************************	#
-#	None								#
-#									#
-# OUTPUT **************************************************************	#
-#	If no failure on _mem_read():					#
-#	FP_SRC(a6) = packed operand now as a binary FP number		#
-#									#
-# ALGORITHM ***********************************************************	#
-#	Get the correct <ea> which is the value on the exception stack	#
-# frame w/ maybe a correction factor if the <ea> is -(an) or (an)+.	#
-# Then, fetch the operand from memory. If the fetch fails, exit		#
-# through facc_in_x().							#
-#	If the packed operand is a ZERO,NAN, or INF, convert it to	#
-# its binary representation here. Else, call decbin() which will	#
-# convert the packed value to an extended precision binary value.	#
-#									#
-#########################################################################
-
-# the stacked <ea> for packed is correct except for -(An).
-# the base reg must be updated for both -(An) and (An)+.
-	global		get_packed
-get_packed:
-	mov.l		&0xc,%d0		# packed is 12 bytes
-	bsr.l		_dcalc_ea		# fetch <ea>; correct An
-
-	lea		FP_SRC(%a6),%a1		# pass: ptr to super dst
-	mov.l		&0xc,%d0		# pass: 12 bytes
-	bsr.l		_dmem_read		# read packed operand
-
-	tst.l		%d1			# did dfetch fail?
-	bne.l		facc_in_x		# yes
-
-# The packed operand is an INF or a NAN if the exponent field is all ones.
-	bfextu		FP_SRC(%a6){&1:&15},%d0	# get exp
-	cmpi.w		%d0,&0x7fff		# INF or NAN?
-	bne.b		gp_try_zero		# no
-	rts					# operand is an INF or NAN
-
-# The packed operand is a zero if the mantissa is all zero, else it's
-# a normal packed op.
-gp_try_zero:
-	mov.b		3+FP_SRC(%a6),%d0	# get byte 4
-	andi.b		&0x0f,%d0		# clear all but last nybble
-	bne.b		gp_not_spec		# not a zero
-	tst.l		FP_SRC_HI(%a6)		# is lw 2 zero?
-	bne.b		gp_not_spec		# not a zero
-	tst.l		FP_SRC_LO(%a6)		# is lw 3 zero?
-	bne.b		gp_not_spec		# not a zero
-	rts					# operand is a ZERO
-gp_not_spec:
-	lea		FP_SRC(%a6),%a0		# pass: ptr to packed op
-	bsr.l		decbin			# convert to extended
-	fmovm.x		&0x80,FP_SRC(%a6)	# make this the srcop
-	rts
-
-#########################################################################
-# decbin(): Converts normalized packed bcd value pointed to by register	#
-#	    a0 to extended-precision value in fp0.			#
-#									#
-# INPUT ***************************************************************	#
-#	a0 = pointer to normalized packed bcd value			#
-#									#
-# OUTPUT **************************************************************	#
-#	fp0 = exact fp representation of the packed bcd value.		#
-#									#
-# ALGORITHM ***********************************************************	#
-#	Expected is a normal bcd (i.e. non-exceptional; all inf, zero,	#
-#	and NaN operands are dispatched without entering this routine)	#
-#	value in 68881/882 format at location (a0).			#
-#									#
-#	A1. Convert the bcd exponent to binary by successive adds and	#
-#	muls. Set the sign according to SE. Subtract 16 to compensate	#
-#	for the mantissa which is to be interpreted as 17 integer	#
-#	digits, rather than 1 integer and 16 fraction digits.		#
-#	Note: this operation can never overflow.			#
-#									#
-#	A2. Convert the bcd mantissa to binary by successive		#
-#	adds and muls in FP0. Set the sign according to SM.		#
-#	The mantissa digits will be converted with the decimal point	#
-#	assumed following the least-significant digit.			#
-#	Note: this operation can never overflow.			#
-#									#
-#	A3. Count the number of leading/trailing zeros in the		#
-#	bcd string.  If SE is positive, count the leading zeros;	#
-#	if negative, count the trailing zeros.  Set the adjusted	#
-#	exponent equal to the exponent from A1 and the zero count	#
-#	added if SM = 1 and subtracted if SM = 0.  Scale the		#
-#	mantissa the equivalent of forcing in the bcd value:		#
-#									#
-#	SM = 0	a non-zero digit in the integer position		#
-#	SM = 1	a non-zero digit in Mant0, lsd of the fraction		#
-#									#
-#	this will insure that any value, regardless of its		#
-#	representation (ex. 0.1E2, 1E1, 10E0, 100E-1), is converted	#
-#	consistently.							#
-#									#
-#	A4. Calculate the factor 10^exp in FP1 using a table of		#
-#	10^(2^n) values.  To reduce the error in forming factors	#
-#	greater than 10^27, a directed rounding scheme is used with	#
-#	tables rounded to RN, RM, and RP, according to the table	#
-#	in the comments of the pwrten section.				#
-#									#
-#	A5. Form the final binary number by scaling the mantissa by	#
-#	the exponent factor.  This is done by multiplying the		#
-#	mantissa in FP0 by the factor in FP1 if the adjusted		#
-#	exponent sign is positive, and dividing FP0 by FP1 if		#
-#	it is negative.							#
-#									#
-#	Clean up and return. Check if the final mul or div was inexact.	#
-#	If so, set INEX1 in USER_FPSR.					#
-#									#
-#########################################################################
-
-#
-#	PTENRN, PTENRM, and PTENRP are arrays of powers of 10 rounded
-#	to nearest, minus, and plus, respectively.  The tables include
-#	10**{1,2,4,8,16,32,64,128,256,512,1024,2048,4096}.  No rounding
-#	is required until the power is greater than 27, however, all
-#	tables include the first 5 for ease of indexing.
-#
-RTABLE:
-	byte		0,0,0,0
-	byte		2,3,2,3
-	byte		2,3,3,2
-	byte		3,2,2,3
-
-	set		FNIBS,7
-	set		FSTRT,0
-
-	set		ESTRT,4
-	set		EDIGITS,2
-
-	global		decbin
-decbin:
-	mov.l		0x0(%a0),FP_SCR0_EX(%a6) # make a copy of input
-	mov.l		0x4(%a0),FP_SCR0_HI(%a6) # so we don't alter it
-	mov.l		0x8(%a0),FP_SCR0_LO(%a6)
-
-	lea		FP_SCR0(%a6),%a0
-
-	movm.l		&0x3c00,-(%sp)		# save d2-d5
-	fmovm.x		&0x1,-(%sp)		# save fp1
-#
-# Calculate exponent:
-#  1. Copy bcd value in memory for use as a working copy.
-#  2. Calculate absolute value of exponent in d1 by mul and add.
-#  3. Correct for exponent sign.
-#  4. Subtract 16 to compensate for interpreting the mant as all integer digits.
-#     (i.e., all digits assumed left of the decimal point.)
-#
-# Register usage:
-#
-#  calc_e:
-#	(*)  d0: temp digit storage
-#	(*)  d1: accumulator for binary exponent
-#	(*)  d2: digit count
-#	(*)  d3: offset pointer
-#	( )  d4: first word of bcd
-#	( )  a0: pointer to working bcd value
-#	( )  a6: pointer to original bcd value
-#	(*)  FP_SCR1: working copy of original bcd value
-#	(*)  L_SCR1: copy of original exponent word
-#
-calc_e:
-	mov.l		&EDIGITS,%d2		# # of nibbles (digits) in fraction part
-	mov.l		&ESTRT,%d3		# counter to pick up digits
-	mov.l		(%a0),%d4		# get first word of bcd
-	clr.l		%d1			# zero d1 for accumulator
-e_gd:
-	mulu.l		&0xa,%d1		# mul partial product by one digit place
-	bfextu		%d4{%d3:&4},%d0		# get the digit and zero extend into d0
-	add.l		%d0,%d1			# d1 = d1 + d0
-	addq.b		&4,%d3			# advance d3 to the next digit
-	dbf.w		%d2,e_gd		# if we have used all 3 digits, exit loop
-	btst		&30,%d4			# get SE
-	beq.b		e_pos			# don't negate if pos
-	neg.l		%d1			# negate before subtracting
-e_pos:
-	sub.l		&16,%d1			# sub to compensate for shift of mant
-	bge.b		e_save			# if still pos, do not neg
-	neg.l		%d1			# now negative, make pos and set SE
-	or.l		&0x40000000,%d4		# set SE in d4,
-	or.l		&0x40000000,(%a0)	# and in working bcd
-e_save:
-	mov.l		%d1,-(%sp)		# save exp on stack
-#
-#
-# Calculate mantissa:
-#  1. Calculate absolute value of mantissa in fp0 by mul and add.
-#  2. Correct for mantissa sign.
-#     (i.e., all digits assumed left of the decimal point.)
-#
-# Register usage:
-#
-#  calc_m:
-#	(*)  d0: temp digit storage
-#	(*)  d1: lword counter
-#	(*)  d2: digit count
-#	(*)  d3: offset pointer
-#	( )  d4: words 2 and 3 of bcd
-#	( )  a0: pointer to working bcd value
-#	( )  a6: pointer to original bcd value
-#	(*) fp0: mantissa accumulator
-#	( )  FP_SCR1: working copy of original bcd value
-#	( )  L_SCR1: copy of original exponent word
-#
-calc_m:
-	mov.l		&1,%d1			# word counter, init to 1
-	fmov.s		&0x00000000,%fp0	# accumulator
-#
-#
-#  Since the packed number has a long word between the first & second parts,
-#  get the integer digit then skip down & get the rest of the
-#  mantissa.  We will unroll the loop once.
-#
-	bfextu		(%a0){&28:&4},%d0	# integer part is ls digit in long word
-	fadd.b		%d0,%fp0		# add digit to sum in fp0
-#
-#
-#  Get the rest of the mantissa.
-#
-loadlw:
-	mov.l		(%a0,%d1.L*4),%d4	# load mantissa lonqword into d4
-	mov.l		&FSTRT,%d3		# counter to pick up digits
-	mov.l		&FNIBS,%d2		# reset number of digits per a0 ptr
-md2b:
-	fmul.s		&0x41200000,%fp0	# fp0 = fp0 * 10
-	bfextu		%d4{%d3:&4},%d0		# get the digit and zero extend
-	fadd.b		%d0,%fp0		# fp0 = fp0 + digit
-#
-#
-#  If all the digits (8) in that long word have been converted (d2=0),
-#  then inc d1 (=2) to point to the next long word and reset d3 to 0
-#  to initialize the digit offset, and set d2 to 7 for the digit count;
-#  else continue with this long word.
-#
-	addq.b		&4,%d3			# advance d3 to the next digit
-	dbf.w		%d2,md2b		# check for last digit in this lw
-nextlw:
-	addq.l		&1,%d1			# inc lw pointer in mantissa
-	cmp.l		%d1,&2			# test for last lw
-	ble.b		loadlw			# if not, get last one
-#
-#  Check the sign of the mant and make the value in fp0 the same sign.
-#
-m_sign:
-	btst		&31,(%a0)		# test sign of the mantissa
-	beq.b		ap_st_z			# if clear, go to append/strip zeros
-	fneg.x		%fp0			# if set, negate fp0
-#
-# Append/strip zeros:
-#
-#  For adjusted exponents which have an absolute value greater than 27*,
-#  this routine calculates the amount needed to normalize the mantissa
-#  for the adjusted exponent.  That number is subtracted from the exp
-#  if the exp was positive, and added if it was negative.  The purpose
-#  of this is to reduce the value of the exponent and the possibility
-#  of error in calculation of pwrten.
-#
-#  1. Branch on the sign of the adjusted exponent.
-#  2p.(positive exp)
-#   2. Check M16 and the digits in lwords 2 and 3 in decending order.
-#   3. Add one for each zero encountered until a non-zero digit.
-#   4. Subtract the count from the exp.
-#   5. Check if the exp has crossed zero in #3 above; make the exp abs
-#	   and set SE.
-#	6. Multiply the mantissa by 10**count.
-#  2n.(negative exp)
-#   2. Check the digits in lwords 3 and 2 in decending order.
-#   3. Add one for each zero encountered until a non-zero digit.
-#   4. Add the count to the exp.
-#   5. Check if the exp has crossed zero in #3 above; clear SE.
-#   6. Divide the mantissa by 10**count.
-#
-#  *Why 27?  If the adjusted exponent is within -28 < expA < 28, than
-#   any adjustment due to append/strip zeros will drive the resultane
-#   exponent towards zero.  Since all pwrten constants with a power
-#   of 27 or less are exact, there is no need to use this routine to
-#   attempt to lessen the resultant exponent.
-#
-# Register usage:
-#
-#  ap_st_z:
-#	(*)  d0: temp digit storage
-#	(*)  d1: zero count
-#	(*)  d2: digit count
-#	(*)  d3: offset pointer
-#	( )  d4: first word of bcd
-#	(*)  d5: lword counter
-#	( )  a0: pointer to working bcd value
-#	( )  FP_SCR1: working copy of original bcd value
-#	( )  L_SCR1: copy of original exponent word
-#
-#
-# First check the absolute value of the exponent to see if this
-# routine is necessary.  If so, then check the sign of the exponent
-# and do append (+) or strip (-) zeros accordingly.
-# This section handles a positive adjusted exponent.
-#
-ap_st_z:
-	mov.l		(%sp),%d1		# load expA for range test
-	cmp.l		%d1,&27			# test is with 27
-	ble.w		pwrten			# if abs(expA) <28, skip ap/st zeros
-	btst		&30,(%a0)		# check sign of exp
-	bne.b		ap_st_n			# if neg, go to neg side
-	clr.l		%d1			# zero count reg
-	mov.l		(%a0),%d4		# load lword 1 to d4
-	bfextu		%d4{&28:&4},%d0		# get M16 in d0
-	bne.b		ap_p_fx			# if M16 is non-zero, go fix exp
-	addq.l		&1,%d1			# inc zero count
-	mov.l		&1,%d5			# init lword counter
-	mov.l		(%a0,%d5.L*4),%d4	# get lword 2 to d4
-	bne.b		ap_p_cl			# if lw 2 is zero, skip it
-	addq.l		&8,%d1			# and inc count by 8
-	addq.l		&1,%d5			# inc lword counter
-	mov.l		(%a0,%d5.L*4),%d4	# get lword 3 to d4
-ap_p_cl:
-	clr.l		%d3			# init offset reg
-	mov.l		&7,%d2			# init digit counter
-ap_p_gd:
-	bfextu		%d4{%d3:&4},%d0		# get digit
-	bne.b		ap_p_fx			# if non-zero, go to fix exp
-	addq.l		&4,%d3			# point to next digit
-	addq.l		&1,%d1			# inc digit counter
-	dbf.w		%d2,ap_p_gd		# get next digit
-ap_p_fx:
-	mov.l		%d1,%d0			# copy counter to d2
-	mov.l		(%sp),%d1		# get adjusted exp from memory
-	sub.l		%d0,%d1			# subtract count from exp
-	bge.b		ap_p_fm			# if still pos, go to pwrten
-	neg.l		%d1			# now its neg; get abs
-	mov.l		(%a0),%d4		# load lword 1 to d4
-	or.l		&0x40000000,%d4		# and set SE in d4
-	or.l		&0x40000000,(%a0)	# and in memory
-#
-# Calculate the mantissa multiplier to compensate for the striping of
-# zeros from the mantissa.
-#
-ap_p_fm:
-	lea.l		PTENRN(%pc),%a1		# get address of power-of-ten table
-	clr.l		%d3			# init table index
-	fmov.s		&0x3f800000,%fp1	# init fp1 to 1
-	mov.l		&3,%d2			# init d2 to count bits in counter
-ap_p_el:
-	asr.l		&1,%d0			# shift lsb into carry
-	bcc.b		ap_p_en			# if 1, mul fp1 by pwrten factor
-	fmul.x		(%a1,%d3),%fp1		# mul by 10**(d3_bit_no)
-ap_p_en:
-	add.l		&12,%d3			# inc d3 to next rtable entry
-	tst.l		%d0			# check if d0 is zero
-	bne.b		ap_p_el			# if not, get next bit
-	fmul.x		%fp1,%fp0		# mul mantissa by 10**(no_bits_shifted)
-	bra.b		pwrten			# go calc pwrten
-#
-# This section handles a negative adjusted exponent.
-#
-ap_st_n:
-	clr.l		%d1			# clr counter
-	mov.l		&2,%d5			# set up d5 to point to lword 3
-	mov.l		(%a0,%d5.L*4),%d4	# get lword 3
-	bne.b		ap_n_cl			# if not zero, check digits
-	sub.l		&1,%d5			# dec d5 to point to lword 2
-	addq.l		&8,%d1			# inc counter by 8
-	mov.l		(%a0,%d5.L*4),%d4	# get lword 2
-ap_n_cl:
-	mov.l		&28,%d3			# point to last digit
-	mov.l		&7,%d2			# init digit counter
-ap_n_gd:
-	bfextu		%d4{%d3:&4},%d0		# get digit
-	bne.b		ap_n_fx			# if non-zero, go to exp fix
-	subq.l		&4,%d3			# point to previous digit
-	addq.l		&1,%d1			# inc digit counter
-	dbf.w		%d2,ap_n_gd		# get next digit
-ap_n_fx:
-	mov.l		%d1,%d0			# copy counter to d0
-	mov.l		(%sp),%d1		# get adjusted exp from memory
-	sub.l		%d0,%d1			# subtract count from exp
-	bgt.b		ap_n_fm			# if still pos, go fix mantissa
-	neg.l		%d1			# take abs of exp and clr SE
-	mov.l		(%a0),%d4		# load lword 1 to d4
-	and.l		&0xbfffffff,%d4		# and clr SE in d4
-	and.l		&0xbfffffff,(%a0)	# and in memory
-#
-# Calculate the mantissa multiplier to compensate for the appending of
-# zeros to the mantissa.
-#
-ap_n_fm:
-	lea.l		PTENRN(%pc),%a1		# get address of power-of-ten table
-	clr.l		%d3			# init table index
-	fmov.s		&0x3f800000,%fp1	# init fp1 to 1
-	mov.l		&3,%d2			# init d2 to count bits in counter
-ap_n_el:
-	asr.l		&1,%d0			# shift lsb into carry
-	bcc.b		ap_n_en			# if 1, mul fp1 by pwrten factor
-	fmul.x		(%a1,%d3),%fp1		# mul by 10**(d3_bit_no)
-ap_n_en:
-	add.l		&12,%d3			# inc d3 to next rtable entry
-	tst.l		%d0			# check if d0 is zero
-	bne.b		ap_n_el			# if not, get next bit
-	fdiv.x		%fp1,%fp0		# div mantissa by 10**(no_bits_shifted)
-#
-#
-# Calculate power-of-ten factor from adjusted and shifted exponent.
-#
-# Register usage:
-#
-#  pwrten:
-#	(*)  d0: temp
-#	( )  d1: exponent
-#	(*)  d2: {FPCR[6:5],SM,SE} as index in RTABLE; temp
-#	(*)  d3: FPCR work copy
-#	( )  d4: first word of bcd
-#	(*)  a1: RTABLE pointer
-#  calc_p:
-#	(*)  d0: temp
-#	( )  d1: exponent
-#	(*)  d3: PWRTxx table index
-#	( )  a0: pointer to working copy of bcd
-#	(*)  a1: PWRTxx pointer
-#	(*) fp1: power-of-ten accumulator
-#
-# Pwrten calculates the exponent factor in the selected rounding mode
-# according to the following table:
-#
-#	Sign of Mant  Sign of Exp  Rounding Mode  PWRTEN Rounding Mode
-#
-#	ANY	  ANY	RN	RN
-#
-#	 +	   +	RP	RP
-#	 -	   +	RP	RM
-#	 +	   -	RP	RM
-#	 -	   -	RP	RP
-#
-#	 +	   +	RM	RM
-#	 -	   +	RM	RP
-#	 +	   -	RM	RP
-#	 -	   -	RM	RM
-#
-#	 +	   +	RZ	RM
-#	 -	   +	RZ	RM
-#	 +	   -	RZ	RP
-#	 -	   -	RZ	RP
-#
-#
-pwrten:
-	mov.l		USER_FPCR(%a6),%d3	# get user's FPCR
-	bfextu		%d3{&26:&2},%d2		# isolate rounding mode bits
-	mov.l		(%a0),%d4		# reload 1st bcd word to d4
-	asl.l		&2,%d2			# format d2 to be
-	bfextu		%d4{&0:&2},%d0		# {FPCR[6],FPCR[5],SM,SE}
-	add.l		%d0,%d2			# in d2 as index into RTABLE
-	lea.l		RTABLE(%pc),%a1		# load rtable base
-	mov.b		(%a1,%d2),%d0		# load new rounding bits from table
-	clr.l		%d3			# clear d3 to force no exc and extended
-	bfins		%d0,%d3{&26:&2}		# stuff new rounding bits in FPCR
-	fmov.l		%d3,%fpcr		# write new FPCR
-	asr.l		&1,%d0			# write correct PTENxx table
-	bcc.b		not_rp			# to a1
-	lea.l		PTENRP(%pc),%a1		# it is RP
-	bra.b		calc_p			# go to init section
-not_rp:
-	asr.l		&1,%d0			# keep checking
-	bcc.b		not_rm
-	lea.l		PTENRM(%pc),%a1		# it is RM
-	bra.b		calc_p			# go to init section
-not_rm:
-	lea.l		PTENRN(%pc),%a1		# it is RN
-calc_p:
-	mov.l		%d1,%d0			# copy exp to d0;use d0
-	bpl.b		no_neg			# if exp is negative,
-	neg.l		%d0			# invert it
-	or.l		&0x40000000,(%a0)	# and set SE bit
-no_neg:
-	clr.l		%d3			# table index
-	fmov.s		&0x3f800000,%fp1	# init fp1 to 1
-e_loop:
-	asr.l		&1,%d0			# shift next bit into carry
-	bcc.b		e_next			# if zero, skip the mul
-	fmul.x		(%a1,%d3),%fp1		# mul by 10**(d3_bit_no)
-e_next:
-	add.l		&12,%d3			# inc d3 to next rtable entry
-	tst.l		%d0			# check if d0 is zero
-	bne.b		e_loop			# not zero, continue shifting
-#
-#
-#  Check the sign of the adjusted exp and make the value in fp0 the
-#  same sign. If the exp was pos then multiply fp1*fp0;
-#  else divide fp0/fp1.
-#
-# Register Usage:
-#  norm:
-#	( )  a0: pointer to working bcd value
-#	(*) fp0: mantissa accumulator
-#	( ) fp1: scaling factor - 10**(abs(exp))
-#
-pnorm:
-	btst		&30,(%a0)		# test the sign of the exponent
-	beq.b		mul			# if clear, go to multiply
-div:
-	fdiv.x		%fp1,%fp0		# exp is negative, so divide mant by exp
-	bra.b		end_dec
-mul:
-	fmul.x		%fp1,%fp0		# exp is positive, so multiply by exp
-#
-#
-# Clean up and return with result in fp0.
-#
-# If the final mul/div in decbin incurred an inex exception,
-# it will be inex2, but will be reported as inex1 by get_op.
-#
-end_dec:
-	fmov.l		%fpsr,%d0		# get status register
-	bclr		&inex2_bit+8,%d0	# test for inex2 and clear it
-	beq.b		no_exc			# skip this if no exc
-	ori.w		&inx1a_mask,2+USER_FPSR(%a6) # set INEX1/AINEX
-no_exc:
-	add.l		&0x4,%sp		# clear 1 lw param
-	fmovm.x		(%sp)+,&0x40		# restore fp1
-	movm.l		(%sp)+,&0x3c		# restore d2-d5
-	fmov.l		&0x0,%fpcr
-	fmov.l		&0x0,%fpsr
-	rts
-
-#########################################################################
-# bindec(): Converts an input in extended precision format to bcd format#
-#									#
-# INPUT ***************************************************************	#
-#	a0 = pointer to the input extended precision value in memory.	#
-#	     the input may be either normalized, unnormalized, or	#
-#	     denormalized.						#
-#	d0 = contains the k-factor sign-extended to 32-bits.		#
-#									#
-# OUTPUT **************************************************************	#
-#	FP_SCR0(a6) = bcd format result on the stack.			#
-#									#
-# ALGORITHM ***********************************************************	#
-#									#
-#	A1.	Set RM and size ext;  Set SIGMA = sign of input.	#
-#		The k-factor is saved for use in d7. Clear the		#
-#		BINDEC_FLG for separating normalized/denormalized	#
-#		input.  If input is unnormalized or denormalized,	#
-#		normalize it.						#
-#									#
-#	A2.	Set X = abs(input).					#
-#									#
-#	A3.	Compute ILOG.						#
-#		ILOG is the log base 10 of the input value.  It is	#
-#		approximated by adding e + 0.f when the original	#
-#		value is viewed as 2^^e * 1.f in extended precision.	#
-#		This value is stored in d6.				#
-#									#
-#	A4.	Clr INEX bit.						#
-#		The operation in A3 above may have set INEX2.		#
-#									#
-#	A5.	Set ICTR = 0;						#
-#		ICTR is a flag used in A13.  It must be set before the	#
-#		loop entry A6.						#
-#									#
-#	A6.	Calculate LEN.						#
-#		LEN is the number of digits to be displayed.  The	#
-#		k-factor can dictate either the total number of digits,	#
-#		if it is a positive number, or the number of digits	#
-#		after the decimal point which are to be included as	#
-#		significant.  See the 68882 manual for examples.	#
-#		If LEN is computed to be greater than 17, set OPERR in	#
-#		USER_FPSR.  LEN is stored in d4.			#
-#									#
-#	A7.	Calculate SCALE.					#
-#		SCALE is equal to 10^ISCALE, where ISCALE is the number	#
-#		of decimal places needed to insure LEN integer digits	#
-#		in the output before conversion to bcd. LAMBDA is the	#
-#		sign of ISCALE, used in A9. Fp1 contains		#
-#		10^^(abs(ISCALE)) using a rounding mode which is a	#
-#		function of the original rounding mode and the signs	#
-#		of ISCALE and X.  A table is given in the code.		#
-#									#
-#	A8.	Clr INEX; Force RZ.					#
-#		The operation in A3 above may have set INEX2.		#
-#		RZ mode is forced for the scaling operation to insure	#
-#		only one rounding error.  The grs bits are collected in #
-#		the INEX flag for use in A10.				#
-#									#
-#	A9.	Scale X -> Y.						#
-#		The mantissa is scaled to the desired number of		#
-#		significant digits.  The excess digits are collected	#
-#		in INEX2.						#
-#									#
-#	A10.	Or in INEX.						#
-#		If INEX is set, round error occurred.  This is		#
-#		compensated for by 'or-ing' in the INEX2 flag to	#
-#		the lsb of Y.						#
-#									#
-#	A11.	Restore original FPCR; set size ext.			#
-#		Perform FINT operation in the user's rounding mode.	#
-#		Keep the size to extended.				#
-#									#
-#	A12.	Calculate YINT = FINT(Y) according to user's rounding	#
-#		mode.  The FPSP routine sintd0 is used.  The output	#
-#		is in fp0.						#
-#									#
-#	A13.	Check for LEN digits.					#
-#		If the int operation results in more than LEN digits,	#
-#		or less than LEN -1 digits, adjust ILOG and repeat from	#
-#		A6.  This test occurs only on the first pass.  If the	#
-#		result is exactly 10^LEN, decrement ILOG and divide	#
-#		the mantissa by 10.					#
-#									#
-#	A14.	Convert the mantissa to bcd.				#
-#		The binstr routine is used to convert the LEN digit	#
-#		mantissa to bcd in memory.  The input to binstr is	#
-#		to be a fraction; i.e. (mantissa)/10^LEN and adjusted	#
-#		such that the decimal point is to the left of bit 63.	#
-#		The bcd digits are stored in the correct position in	#
-#		the final string area in memory.			#
-#									#
-#	A15.	Convert the exponent to bcd.				#
-#		As in A14 above, the exp is converted to bcd and the	#
-#		digits are stored in the final string.			#
-#		Test the length of the final exponent string.  If the	#
-#		length is 4, set operr.					#
-#									#
-#	A16.	Write sign bits to final string.			#
-#									#
-#########################################################################
-
-set	BINDEC_FLG,	EXC_TEMP	# DENORM flag
-
-# Constants in extended precision
-PLOG2:
-	long		0x3FFD0000,0x9A209A84,0xFBCFF798,0x00000000
-PLOG2UP1:
-	long		0x3FFD0000,0x9A209A84,0xFBCFF799,0x00000000
-
-# Constants in single precision
-FONE:
-	long		0x3F800000,0x00000000,0x00000000,0x00000000
-FTWO:
-	long		0x40000000,0x00000000,0x00000000,0x00000000
-FTEN:
-	long		0x41200000,0x00000000,0x00000000,0x00000000
-F4933:
-	long		0x459A2800,0x00000000,0x00000000,0x00000000
-
-RBDTBL:
-	byte		0,0,0,0
-	byte		3,3,2,2
-	byte		3,2,2,3
-	byte		2,3,3,2
-
-#	Implementation Notes:
-#
-#	The registers are used as follows:
-#
-#		d0: scratch; LEN input to binstr
-#		d1: scratch
-#		d2: upper 32-bits of mantissa for binstr
-#		d3: scratch;lower 32-bits of mantissa for binstr
-#		d4: LEN
-#		d5: LAMBDA/ICTR
-#		d6: ILOG
-#		d7: k-factor
-#		a0: ptr for original operand/final result
-#		a1: scratch pointer
-#		a2: pointer to FP_X; abs(original value) in ext
-#		fp0: scratch
-#		fp1: scratch
-#		fp2: scratch
-#		F_SCR1:
-#		F_SCR2:
-#		L_SCR1:
-#		L_SCR2:
-
-	global		bindec
-bindec:
-	movm.l		&0x3f20,-(%sp)	#  {%d2-%d7/%a2}
-	fmovm.x		&0x7,-(%sp)	#  {%fp0-%fp2}
-
-# A1. Set RM and size ext. Set SIGMA = sign input;
-#     The k-factor is saved for use in d7.  Clear BINDEC_FLG for
-#     separating  normalized/denormalized input.  If the input
-#     is a denormalized number, set the BINDEC_FLG memory word
-#     to signal denorm.  If the input is unnormalized, normalize
-#     the input and test for denormalized result.
-#
-	fmov.l		&rm_mode*0x10,%fpcr	# set RM and ext
-	mov.l		(%a0),L_SCR2(%a6)	# save exponent for sign check
-	mov.l		%d0,%d7		# move k-factor to d7
-
-	clr.b		BINDEC_FLG(%a6)	# clr norm/denorm flag
-	cmpi.b		STAG(%a6),&DENORM # is input a DENORM?
-	bne.w		A2_str		# no; input is a NORM
-
-#
-# Normalize the denorm
-#
-un_de_norm:
-	mov.w		(%a0),%d0
-	and.w		&0x7fff,%d0	# strip sign of normalized exp
-	mov.l		4(%a0),%d1
-	mov.l		8(%a0),%d2
-norm_loop:
-	sub.w		&1,%d0
-	lsl.l		&1,%d2
-	roxl.l		&1,%d1
-	tst.l		%d1
-	bge.b		norm_loop
-#
-# Test if the normalized input is denormalized
-#
-	tst.w		%d0
-	bgt.b		pos_exp		# if greater than zero, it is a norm
-	st		BINDEC_FLG(%a6)	# set flag for denorm
-pos_exp:
-	and.w		&0x7fff,%d0	# strip sign of normalized exp
-	mov.w		%d0,(%a0)
-	mov.l		%d1,4(%a0)
-	mov.l		%d2,8(%a0)
-
-# A2. Set X = abs(input).
-#
-A2_str:
-	mov.l		(%a0),FP_SCR1(%a6)	# move input to work space
-	mov.l		4(%a0),FP_SCR1+4(%a6)	# move input to work space
-	mov.l		8(%a0),FP_SCR1+8(%a6)	# move input to work space
-	and.l		&0x7fffffff,FP_SCR1(%a6)	# create abs(X)
-
-# A3. Compute ILOG.
-#     ILOG is the log base 10 of the input value.  It is approx-
-#     imated by adding e + 0.f when the original value is viewed
-#     as 2^^e * 1.f in extended precision.  This value is stored
-#     in d6.
-#
-# Register usage:
-#	Input/Output
-#	d0: k-factor/exponent
-#	d2: x/x
-#	d3: x/x
-#	d4: x/x
-#	d5: x/x
-#	d6: x/ILOG
-#	d7: k-factor/Unchanged
-#	a0: ptr for original operand/final result
-#	a1: x/x
-#	a2: x/x
-#	fp0: x/float(ILOG)
-#	fp1: x/x
-#	fp2: x/x
-#	F_SCR1:x/x
-#	F_SCR2:Abs(X)/Abs(X) with $3fff exponent
-#	L_SCR1:x/x
-#	L_SCR2:first word of X packed/Unchanged
-
-	tst.b		BINDEC_FLG(%a6)	# check for denorm
-	beq.b		A3_cont		# if clr, continue with norm
-	mov.l		&-4933,%d6	# force ILOG = -4933
-	bra.b		A4_str
-A3_cont:
-	mov.w		FP_SCR1(%a6),%d0	# move exp to d0
-	mov.w		&0x3fff,FP_SCR1(%a6)	# replace exponent with 0x3fff
-	fmov.x		FP_SCR1(%a6),%fp0	# now fp0 has 1.f
-	sub.w		&0x3fff,%d0	# strip off bias
-	fadd.w		%d0,%fp0	# add in exp
-	fsub.s		FONE(%pc),%fp0	# subtract off 1.0
-	fbge.w		pos_res		# if pos, branch
-	fmul.x		PLOG2UP1(%pc),%fp0	# if neg, mul by LOG2UP1
-	fmov.l		%fp0,%d6	# put ILOG in d6 as a lword
-	bra.b		A4_str		# go move out ILOG
-pos_res:
-	fmul.x		PLOG2(%pc),%fp0	# if pos, mul by LOG2
-	fmov.l		%fp0,%d6	# put ILOG in d6 as a lword
-
-
-# A4. Clr INEX bit.
-#     The operation in A3 above may have set INEX2.
-
-A4_str:
-	fmov.l		&0,%fpsr	# zero all of fpsr - nothing needed
-
-
-# A5. Set ICTR = 0;
-#     ICTR is a flag used in A13.  It must be set before the
-#     loop entry A6. The lower word of d5 is used for ICTR.
-
-	clr.w		%d5		# clear ICTR
-
-# A6. Calculate LEN.
-#     LEN is the number of digits to be displayed.  The k-factor
-#     can dictate either the total number of digits, if it is
-#     a positive number, or the number of digits after the
-#     original decimal point which are to be included as
-#     significant.  See the 68882 manual for examples.
-#     If LEN is computed to be greater than 17, set OPERR in
-#     USER_FPSR.  LEN is stored in d4.
-#
-# Register usage:
-#	Input/Output
-#	d0: exponent/Unchanged
-#	d2: x/x/scratch
-#	d3: x/x
-#	d4: exc picture/LEN
-#	d5: ICTR/Unchanged
-#	d6: ILOG/Unchanged
-#	d7: k-factor/Unchanged
-#	a0: ptr for original operand/final result
-#	a1: x/x
-#	a2: x/x
-#	fp0: float(ILOG)/Unchanged
-#	fp1: x/x
-#	fp2: x/x
-#	F_SCR1:x/x
-#	F_SCR2:Abs(X) with $3fff exponent/Unchanged
-#	L_SCR1:x/x
-#	L_SCR2:first word of X packed/Unchanged
-
-A6_str:
-	tst.l		%d7		# branch on sign of k
-	ble.b		k_neg		# if k <= 0, LEN = ILOG + 1 - k
-	mov.l		%d7,%d4		# if k > 0, LEN = k
-	bra.b		len_ck		# skip to LEN check
-k_neg:
-	mov.l		%d6,%d4		# first load ILOG to d4
-	sub.l		%d7,%d4		# subtract off k
-	addq.l		&1,%d4		# add in the 1
-len_ck:
-	tst.l		%d4		# LEN check: branch on sign of LEN
-	ble.b		LEN_ng		# if neg, set LEN = 1
-	cmp.l		%d4,&17		# test if LEN > 17
-	ble.b		A7_str		# if not, forget it
-	mov.l		&17,%d4		# set max LEN = 17
-	tst.l		%d7		# if negative, never set OPERR
-	ble.b		A7_str		# if positive, continue
-	or.l		&opaop_mask,USER_FPSR(%a6)	# set OPERR & AIOP in USER_FPSR
-	bra.b		A7_str		# finished here
-LEN_ng:
-	mov.l		&1,%d4		# min LEN is 1
-
-
-# A7. Calculate SCALE.
-#     SCALE is equal to 10^ISCALE, where ISCALE is the number
-#     of decimal places needed to insure LEN integer digits
-#     in the output before conversion to bcd. LAMBDA is the sign
-#     of ISCALE, used in A9.  Fp1 contains 10^^(abs(ISCALE)) using
-#     the rounding mode as given in the following table (see
-#     Coonen, p. 7.23 as ref.; however, the SCALE variable is
-#     of opposite sign in bindec.sa from Coonen).
-#
-#	Initial					USE
-#	FPCR[6:5]	LAMBDA	SIGN(X)		FPCR[6:5]
-#	----------------------------------------------
-#	 RN	00	   0	   0		00/0	RN
-#	 RN	00	   0	   1		00/0	RN
-#	 RN	00	   1	   0		00/0	RN
-#	 RN	00	   1	   1		00/0	RN
-#	 RZ	01	   0	   0		11/3	RP
-#	 RZ	01	   0	   1		11/3	RP
-#	 RZ	01	   1	   0		10/2	RM
-#	 RZ	01	   1	   1		10/2	RM
-#	 RM	10	   0	   0		11/3	RP
-#	 RM	10	   0	   1		10/2	RM
-#	 RM	10	   1	   0		10/2	RM
-#	 RM	10	   1	   1		11/3	RP
-#	 RP	11	   0	   0		10/2	RM
-#	 RP	11	   0	   1		11/3	RP
-#	 RP	11	   1	   0		11/3	RP
-#	 RP	11	   1	   1		10/2	RM
-#
-# Register usage:
-#	Input/Output
-#	d0: exponent/scratch - final is 0
-#	d2: x/0 or 24 for A9
-#	d3: x/scratch - offset ptr into PTENRM array
-#	d4: LEN/Unchanged
-#	d5: 0/ICTR:LAMBDA
-#	d6: ILOG/ILOG or k if ((k<=0)&(ILOG<k))
-#	d7: k-factor/Unchanged
-#	a0: ptr for original operand/final result
-#	a1: x/ptr to PTENRM array
-#	a2: x/x
-#	fp0: float(ILOG)/Unchanged
-#	fp1: x/10^ISCALE
-#	fp2: x/x
-#	F_SCR1:x/x
-#	F_SCR2:Abs(X) with $3fff exponent/Unchanged
-#	L_SCR1:x/x
-#	L_SCR2:first word of X packed/Unchanged
-
-A7_str:
-	tst.l		%d7		# test sign of k
-	bgt.b		k_pos		# if pos and > 0, skip this
-	cmp.l		%d7,%d6		# test k - ILOG
-	blt.b		k_pos		# if ILOG >= k, skip this
-	mov.l		%d7,%d6		# if ((k<0) & (ILOG < k)) ILOG = k
-k_pos:
-	mov.l		%d6,%d0		# calc ILOG + 1 - LEN in d0
-	addq.l		&1,%d0		# add the 1
-	sub.l		%d4,%d0		# sub off LEN
-	swap		%d5		# use upper word of d5 for LAMBDA
-	clr.w		%d5		# set it zero initially
-	clr.w		%d2		# set up d2 for very small case
-	tst.l		%d0		# test sign of ISCALE
-	bge.b		iscale		# if pos, skip next inst
-	addq.w		&1,%d5		# if neg, set LAMBDA true
-	cmp.l		%d0,&0xffffecd4	# test iscale <= -4908
-	bgt.b		no_inf		# if false, skip rest
-	add.l		&24,%d0		# add in 24 to iscale
-	mov.l		&24,%d2		# put 24 in d2 for A9
-no_inf:
-	neg.l		%d0		# and take abs of ISCALE
-iscale:
-	fmov.s		FONE(%pc),%fp1	# init fp1 to 1
-	bfextu		USER_FPCR(%a6){&26:&2},%d1	# get initial rmode bits
-	lsl.w		&1,%d1		# put them in bits 2:1
-	add.w		%d5,%d1		# add in LAMBDA
-	lsl.w		&1,%d1		# put them in bits 3:1
-	tst.l		L_SCR2(%a6)	# test sign of original x
-	bge.b		x_pos		# if pos, don't set bit 0
-	addq.l		&1,%d1		# if neg, set bit 0
-x_pos:
-	lea.l		RBDTBL(%pc),%a2	# load rbdtbl base
-	mov.b		(%a2,%d1),%d3	# load d3 with new rmode
-	lsl.l		&4,%d3		# put bits in proper position
-	fmov.l		%d3,%fpcr	# load bits into fpu
-	lsr.l		&4,%d3		# put bits in proper position
-	tst.b		%d3		# decode new rmode for pten table
-	bne.b		not_rn		# if zero, it is RN
-	lea.l		PTENRN(%pc),%a1	# load a1 with RN table base
-	bra.b		rmode		# exit decode
-not_rn:
-	lsr.b		&1,%d3		# get lsb in carry
-	bcc.b		not_rp2		# if carry clear, it is RM
-	lea.l		PTENRP(%pc),%a1	# load a1 with RP table base
-	bra.b		rmode		# exit decode
-not_rp2:
-	lea.l		PTENRM(%pc),%a1	# load a1 with RM table base
-rmode:
-	clr.l		%d3		# clr table index
-e_loop2:
-	lsr.l		&1,%d0		# shift next bit into carry
-	bcc.b		e_next2		# if zero, skip the mul
-	fmul.x		(%a1,%d3),%fp1	# mul by 10**(d3_bit_no)
-e_next2:
-	add.l		&12,%d3		# inc d3 to next pwrten table entry
-	tst.l		%d0		# test if ISCALE is zero
-	bne.b		e_loop2		# if not, loop
-
-# A8. Clr INEX; Force RZ.
-#     The operation in A3 above may have set INEX2.
-#     RZ mode is forced for the scaling operation to insure
-#     only one rounding error.  The grs bits are collected in
-#     the INEX flag for use in A10.
-#
-# Register usage:
-#	Input/Output
-
-	fmov.l		&0,%fpsr	# clr INEX
-	fmov.l		&rz_mode*0x10,%fpcr	# set RZ rounding mode
-
-# A9. Scale X -> Y.
-#     The mantissa is scaled to the desired number of significant
-#     digits.  The excess digits are collected in INEX2. If mul,
-#     Check d2 for excess 10 exponential value.  If not zero,
-#     the iscale value would have caused the pwrten calculation
-#     to overflow.  Only a negative iscale can cause this, so
-#     multiply by 10^(d2), which is now only allowed to be 24,
-#     with a multiply by 10^8 and 10^16, which is exact since
-#     10^24 is exact.  If the input was denormalized, we must
-#     create a busy stack frame with the mul command and the
-#     two operands, and allow the fpu to complete the multiply.
-#
-# Register usage:
-#	Input/Output
-#	d0: FPCR with RZ mode/Unchanged
-#	d2: 0 or 24/unchanged
-#	d3: x/x
-#	d4: LEN/Unchanged
-#	d5: ICTR:LAMBDA
-#	d6: ILOG/Unchanged
-#	d7: k-factor/Unchanged
-#	a0: ptr for original operand/final result
-#	a1: ptr to PTENRM array/Unchanged
-#	a2: x/x
-#	fp0: float(ILOG)/X adjusted for SCALE (Y)
-#	fp1: 10^ISCALE/Unchanged
-#	fp2: x/x
-#	F_SCR1:x/x
-#	F_SCR2:Abs(X) with $3fff exponent/Unchanged
-#	L_SCR1:x/x
-#	L_SCR2:first word of X packed/Unchanged
-
-A9_str:
-	fmov.x		(%a0),%fp0	# load X from memory
-	fabs.x		%fp0		# use abs(X)
-	tst.w		%d5		# LAMBDA is in lower word of d5
-	bne.b		sc_mul		# if neg (LAMBDA = 1), scale by mul
-	fdiv.x		%fp1,%fp0	# calculate X / SCALE -> Y to fp0
-	bra.w		A10_st		# branch to A10
-
-sc_mul:
-	tst.b		BINDEC_FLG(%a6)	# check for denorm
-	beq.w		A9_norm		# if norm, continue with mul
-
-# for DENORM, we must calculate:
-#	fp0 = input_op * 10^ISCALE * 10^24
-# since the input operand is a DENORM, we can't multiply it directly.
-# so, we do the multiplication of the exponents and mantissas separately.
-# in this way, we avoid underflow on intermediate stages of the
-# multiplication and guarantee a result without exception.
-	fmovm.x		&0x2,-(%sp)	# save 10^ISCALE to stack
-
-	mov.w		(%sp),%d3	# grab exponent
-	andi.w		&0x7fff,%d3	# clear sign
-	ori.w		&0x8000,(%a0)	# make DENORM exp negative
-	add.w		(%a0),%d3	# add DENORM exp to 10^ISCALE exp
-	subi.w		&0x3fff,%d3	# subtract BIAS
-	add.w		36(%a1),%d3
-	subi.w		&0x3fff,%d3	# subtract BIAS
-	add.w		48(%a1),%d3
-	subi.w		&0x3fff,%d3	# subtract BIAS
-
-	bmi.w		sc_mul_err	# is result is DENORM, punt!!!
-
-	andi.w		&0x8000,(%sp)	# keep sign
-	or.w		%d3,(%sp)	# insert new exponent
-	andi.w		&0x7fff,(%a0)	# clear sign bit on DENORM again
-	mov.l		0x8(%a0),-(%sp) # put input op mantissa on stk
-	mov.l		0x4(%a0),-(%sp)
-	mov.l		&0x3fff0000,-(%sp) # force exp to zero
-	fmovm.x		(%sp)+,&0x80	# load normalized DENORM into fp0
-	fmul.x		(%sp)+,%fp0
-
-#	fmul.x	36(%a1),%fp0	# multiply fp0 by 10^8
-#	fmul.x	48(%a1),%fp0	# multiply fp0 by 10^16
-	mov.l		36+8(%a1),-(%sp) # get 10^8 mantissa
-	mov.l		36+4(%a1),-(%sp)
-	mov.l		&0x3fff0000,-(%sp) # force exp to zero
-	mov.l		48+8(%a1),-(%sp) # get 10^16 mantissa
-	mov.l		48+4(%a1),-(%sp)
-	mov.l		&0x3fff0000,-(%sp)# force exp to zero
-	fmul.x		(%sp)+,%fp0	# multiply fp0 by 10^8
-	fmul.x		(%sp)+,%fp0	# multiply fp0 by 10^16
-	bra.b		A10_st
-
-sc_mul_err:
-	bra.b		sc_mul_err
-
-A9_norm:
-	tst.w		%d2		# test for small exp case
-	beq.b		A9_con		# if zero, continue as normal
-	fmul.x		36(%a1),%fp0	# multiply fp0 by 10^8
-	fmul.x		48(%a1),%fp0	# multiply fp0 by 10^16
-A9_con:
-	fmul.x		%fp1,%fp0	# calculate X * SCALE -> Y to fp0
-
-# A10. Or in INEX.
-#      If INEX is set, round error occurred.  This is compensated
-#      for by 'or-ing' in the INEX2 flag to the lsb of Y.
-#
-# Register usage:
-#	Input/Output
-#	d0: FPCR with RZ mode/FPSR with INEX2 isolated
-#	d2: x/x
-#	d3: x/x
-#	d4: LEN/Unchanged
-#	d5: ICTR:LAMBDA
-#	d6: ILOG/Unchanged
-#	d7: k-factor/Unchanged
-#	a0: ptr for original operand/final result
-#	a1: ptr to PTENxx array/Unchanged
-#	a2: x/ptr to FP_SCR1(a6)
-#	fp0: Y/Y with lsb adjusted
-#	fp1: 10^ISCALE/Unchanged
-#	fp2: x/x
-
-A10_st:
-	fmov.l		%fpsr,%d0	# get FPSR
-	fmov.x		%fp0,FP_SCR1(%a6)	# move Y to memory
-	lea.l		FP_SCR1(%a6),%a2	# load a2 with ptr to FP_SCR1
-	btst		&9,%d0		# check if INEX2 set
-	beq.b		A11_st		# if clear, skip rest
-	or.l		&1,8(%a2)	# or in 1 to lsb of mantissa
-	fmov.x		FP_SCR1(%a6),%fp0	# write adjusted Y back to fpu
-
-
-# A11. Restore original FPCR; set size ext.
-#      Perform FINT operation in the user's rounding mode.  Keep
-#      the size to extended.  The sintdo entry point in the sint
-#      routine expects the FPCR value to be in USER_FPCR for
-#      mode and precision.  The original FPCR is saved in L_SCR1.
-
-A11_st:
-	mov.l		USER_FPCR(%a6),L_SCR1(%a6)	# save it for later
-	and.l		&0x00000030,USER_FPCR(%a6)	# set size to ext,
-#					;block exceptions
-
-
-# A12. Calculate YINT = FINT(Y) according to user's rounding mode.
-#      The FPSP routine sintd0 is used.  The output is in fp0.
-#
-# Register usage:
-#	Input/Output
-#	d0: FPSR with AINEX cleared/FPCR with size set to ext
-#	d2: x/x/scratch
-#	d3: x/x
-#	d4: LEN/Unchanged
-#	d5: ICTR:LAMBDA/Unchanged
-#	d6: ILOG/Unchanged
-#	d7: k-factor/Unchanged
-#	a0: ptr for original operand/src ptr for sintdo
-#	a1: ptr to PTENxx array/Unchanged
-#	a2: ptr to FP_SCR1(a6)/Unchanged
-#	a6: temp pointer to FP_SCR1(a6) - orig value saved and restored
-#	fp0: Y/YINT
-#	fp1: 10^ISCALE/Unchanged
-#	fp2: x/x
-#	F_SCR1:x/x
-#	F_SCR2:Y adjusted for inex/Y with original exponent
-#	L_SCR1:x/original USER_FPCR
-#	L_SCR2:first word of X packed/Unchanged
-
-A12_st:
-	movm.l	&0xc0c0,-(%sp)	# save regs used by sintd0	 {%d0-%d1/%a0-%a1}
-	mov.l	L_SCR1(%a6),-(%sp)
-	mov.l	L_SCR2(%a6),-(%sp)
-
-	lea.l		FP_SCR1(%a6),%a0	# a0 is ptr to FP_SCR1(a6)
-	fmov.x		%fp0,(%a0)	# move Y to memory at FP_SCR1(a6)
-	tst.l		L_SCR2(%a6)	# test sign of original operand
-	bge.b		do_fint12		# if pos, use Y
-	or.l		&0x80000000,(%a0)	# if neg, use -Y
-do_fint12:
-	mov.l	USER_FPSR(%a6),-(%sp)
-#	bsr	sintdo		# sint routine returns int in fp0
-
-	fmov.l	USER_FPCR(%a6),%fpcr
-	fmov.l	&0x0,%fpsr			# clear the AEXC bits!!!
-##	mov.l		USER_FPCR(%a6),%d0	# ext prec/keep rnd mode
-##	andi.l		&0x00000030,%d0
-##	fmov.l		%d0,%fpcr
-	fint.x		FP_SCR1(%a6),%fp0	# do fint()
-	fmov.l	%fpsr,%d0
-	or.w	%d0,FPSR_EXCEPT(%a6)
-##	fmov.l		&0x0,%fpcr
-##	fmov.l		%fpsr,%d0		# don't keep ccodes
-##	or.w		%d0,FPSR_EXCEPT(%a6)
-
-	mov.b	(%sp),USER_FPSR(%a6)
-	add.l	&4,%sp
-
-	mov.l	(%sp)+,L_SCR2(%a6)
-	mov.l	(%sp)+,L_SCR1(%a6)
-	movm.l	(%sp)+,&0x303	# restore regs used by sint	 {%d0-%d1/%a0-%a1}
-
-	mov.l	L_SCR2(%a6),FP_SCR1(%a6)	# restore original exponent
-	mov.l	L_SCR1(%a6),USER_FPCR(%a6)	# restore user's FPCR
-
-# A13. Check for LEN digits.
-#      If the int operation results in more than LEN digits,
-#      or less than LEN -1 digits, adjust ILOG and repeat from
-#      A6.  This test occurs only on the first pass.  If the
-#      result is exactly 10^LEN, decrement ILOG and divide
-#      the mantissa by 10.  The calculation of 10^LEN cannot
-#      be inexact, since all powers of ten up to 10^27 are exact
-#      in extended precision, so the use of a previous power-of-ten
-#      table will introduce no error.
-#
-#
-# Register usage:
-#	Input/Output
-#	d0: FPCR with size set to ext/scratch final = 0
-#	d2: x/x
-#	d3: x/scratch final = x
-#	d4: LEN/LEN adjusted
-#	d5: ICTR:LAMBDA/LAMBDA:ICTR
-#	d6: ILOG/ILOG adjusted
-#	d7: k-factor/Unchanged
-#	a0: pointer into memory for packed bcd string formation
-#	a1: ptr to PTENxx array/Unchanged
-#	a2: ptr to FP_SCR1(a6)/Unchanged
-#	fp0: int portion of Y/abs(YINT) adjusted
-#	fp1: 10^ISCALE/Unchanged
-#	fp2: x/10^LEN
-#	F_SCR1:x/x
-#	F_SCR2:Y with original exponent/Unchanged
-#	L_SCR1:original USER_FPCR/Unchanged
-#	L_SCR2:first word of X packed/Unchanged
-
-A13_st:
-	swap		%d5		# put ICTR in lower word of d5
-	tst.w		%d5		# check if ICTR = 0
-	bne		not_zr		# if non-zero, go to second test
-#
-# Compute 10^(LEN-1)
-#
-	fmov.s		FONE(%pc),%fp2	# init fp2 to 1.0
-	mov.l		%d4,%d0		# put LEN in d0
-	subq.l		&1,%d0		# d0 = LEN -1
-	clr.l		%d3		# clr table index
-l_loop:
-	lsr.l		&1,%d0		# shift next bit into carry
-	bcc.b		l_next		# if zero, skip the mul
-	fmul.x		(%a1,%d3),%fp2	# mul by 10**(d3_bit_no)
-l_next:
-	add.l		&12,%d3		# inc d3 to next pwrten table entry
-	tst.l		%d0		# test if LEN is zero
-	bne.b		l_loop		# if not, loop
-#
-# 10^LEN-1 is computed for this test and A14.  If the input was
-# denormalized, check only the case in which YINT > 10^LEN.
-#
-	tst.b		BINDEC_FLG(%a6)	# check if input was norm
-	beq.b		A13_con		# if norm, continue with checking
-	fabs.x		%fp0		# take abs of YINT
-	bra		test_2
-#
-# Compare abs(YINT) to 10^(LEN-1) and 10^LEN
-#
-A13_con:
-	fabs.x		%fp0		# take abs of YINT
-	fcmp.x		%fp0,%fp2	# compare abs(YINT) with 10^(LEN-1)
-	fbge.w		test_2		# if greater, do next test
-	subq.l		&1,%d6		# subtract 1 from ILOG
-	mov.w		&1,%d5		# set ICTR
-	fmov.l		&rm_mode*0x10,%fpcr	# set rmode to RM
-	fmul.s		FTEN(%pc),%fp2	# compute 10^LEN
-	bra.w		A6_str		# return to A6 and recompute YINT
-test_2:
-	fmul.s		FTEN(%pc),%fp2	# compute 10^LEN
-	fcmp.x		%fp0,%fp2	# compare abs(YINT) with 10^LEN
-	fblt.w		A14_st		# if less, all is ok, go to A14
-	fbgt.w		fix_ex		# if greater, fix and redo
-	fdiv.s		FTEN(%pc),%fp0	# if equal, divide by 10
-	addq.l		&1,%d6		# and inc ILOG
-	bra.b		A14_st		# and continue elsewhere
-fix_ex:
-	addq.l		&1,%d6		# increment ILOG by 1
-	mov.w		&1,%d5		# set ICTR
-	fmov.l		&rm_mode*0x10,%fpcr	# set rmode to RM
-	bra.w		A6_str		# return to A6 and recompute YINT
-#
-# Since ICTR <> 0, we have already been through one adjustment,
-# and shouldn't have another; this is to check if abs(YINT) = 10^LEN
-# 10^LEN is again computed using whatever table is in a1 since the
-# value calculated cannot be inexact.
-#
-not_zr:
-	fmov.s		FONE(%pc),%fp2	# init fp2 to 1.0
-	mov.l		%d4,%d0		# put LEN in d0
-	clr.l		%d3		# clr table index
-z_loop:
-	lsr.l		&1,%d0		# shift next bit into carry
-	bcc.b		z_next		# if zero, skip the mul
-	fmul.x		(%a1,%d3),%fp2	# mul by 10**(d3_bit_no)
-z_next:
-	add.l		&12,%d3		# inc d3 to next pwrten table entry
-	tst.l		%d0		# test if LEN is zero
-	bne.b		z_loop		# if not, loop
-	fabs.x		%fp0		# get abs(YINT)
-	fcmp.x		%fp0,%fp2	# check if abs(YINT) = 10^LEN
-	fbneq.w		A14_st		# if not, skip this
-	fdiv.s		FTEN(%pc),%fp0	# divide abs(YINT) by 10
-	addq.l		&1,%d6		# and inc ILOG by 1
-	addq.l		&1,%d4		# and inc LEN
-	fmul.s		FTEN(%pc),%fp2	# if LEN++, the get 10^^LEN
-
-# A14. Convert the mantissa to bcd.
-#      The binstr routine is used to convert the LEN digit
-#      mantissa to bcd in memory.  The input to binstr is
-#      to be a fraction; i.e. (mantissa)/10^LEN and adjusted
-#      such that the decimal point is to the left of bit 63.
-#      The bcd digits are stored in the correct position in
-#      the final string area in memory.
-#
-#
-# Register usage:
-#	Input/Output
-#	d0: x/LEN call to binstr - final is 0
-#	d1: x/0
-#	d2: x/ms 32-bits of mant of abs(YINT)
-#	d3: x/ls 32-bits of mant of abs(YINT)
-#	d4: LEN/Unchanged
-#	d5: ICTR:LAMBDA/LAMBDA:ICTR
-#	d6: ILOG
-#	d7: k-factor/Unchanged
-#	a0: pointer into memory for packed bcd string formation
-#	    /ptr to first mantissa byte in result string
-#	a1: ptr to PTENxx array/Unchanged
-#	a2: ptr to FP_SCR1(a6)/Unchanged
-#	fp0: int portion of Y/abs(YINT) adjusted
-#	fp1: 10^ISCALE/Unchanged
-#	fp2: 10^LEN/Unchanged
-#	F_SCR1:x/Work area for final result
-#	F_SCR2:Y with original exponent/Unchanged
-#	L_SCR1:original USER_FPCR/Unchanged
-#	L_SCR2:first word of X packed/Unchanged
-
-A14_st:
-	fmov.l		&rz_mode*0x10,%fpcr	# force rz for conversion
-	fdiv.x		%fp2,%fp0	# divide abs(YINT) by 10^LEN
-	lea.l		FP_SCR0(%a6),%a0
-	fmov.x		%fp0,(%a0)	# move abs(YINT)/10^LEN to memory
-	mov.l		4(%a0),%d2	# move 2nd word of FP_RES to d2
-	mov.l		8(%a0),%d3	# move 3rd word of FP_RES to d3
-	clr.l		4(%a0)		# zero word 2 of FP_RES
-	clr.l		8(%a0)		# zero word 3 of FP_RES
-	mov.l		(%a0),%d0	# move exponent to d0
-	swap		%d0		# put exponent in lower word
-	beq.b		no_sft		# if zero, don't shift
-	sub.l		&0x3ffd,%d0	# sub bias less 2 to make fract
-	tst.l		%d0		# check if > 1
-	bgt.b		no_sft		# if so, don't shift
-	neg.l		%d0		# make exp positive
-m_loop:
-	lsr.l		&1,%d2		# shift d2:d3 right, add 0s
-	roxr.l		&1,%d3		# the number of places
-	dbf.w		%d0,m_loop	# given in d0
-no_sft:
-	tst.l		%d2		# check for mantissa of zero
-	bne.b		no_zr		# if not, go on
-	tst.l		%d3		# continue zero check
-	beq.b		zer_m		# if zero, go directly to binstr
-no_zr:
-	clr.l		%d1		# put zero in d1 for addx
-	add.l		&0x00000080,%d3	# inc at bit 7
-	addx.l		%d1,%d2		# continue inc
-	and.l		&0xffffff80,%d3	# strip off lsb not used by 882
-zer_m:
-	mov.l		%d4,%d0		# put LEN in d0 for binstr call
-	addq.l		&3,%a0		# a0 points to M16 byte in result
-	bsr		binstr		# call binstr to convert mant
-
-
-# A15. Convert the exponent to bcd.
-#      As in A14 above, the exp is converted to bcd and the
-#      digits are stored in the final string.
-#
-#      Digits are stored in L_SCR1(a6) on return from BINDEC as:
-#
-#	 32               16 15                0
-#	-----------------------------------------
-#	|  0 | e3 | e2 | e1 | e4 |  X |  X |  X |
-#	-----------------------------------------
-#
-# And are moved into their proper places in FP_SCR0.  If digit e4
-# is non-zero, OPERR is signaled.  In all cases, all 4 digits are
-# written as specified in the 881/882 manual for packed decimal.
-#
-# Register usage:
-#	Input/Output
-#	d0: x/LEN call to binstr - final is 0
-#	d1: x/scratch (0);shift count for final exponent packing
-#	d2: x/ms 32-bits of exp fraction/scratch
-#	d3: x/ls 32-bits of exp fraction
-#	d4: LEN/Unchanged
-#	d5: ICTR:LAMBDA/LAMBDA:ICTR
-#	d6: ILOG
-#	d7: k-factor/Unchanged
-#	a0: ptr to result string/ptr to L_SCR1(a6)
-#	a1: ptr to PTENxx array/Unchanged
-#	a2: ptr to FP_SCR1(a6)/Unchanged
-#	fp0: abs(YINT) adjusted/float(ILOG)
-#	fp1: 10^ISCALE/Unchanged
-#	fp2: 10^LEN/Unchanged
-#	F_SCR1:Work area for final result/BCD result
-#	F_SCR2:Y with original exponent/ILOG/10^4
-#	L_SCR1:original USER_FPCR/Exponent digits on return from binstr
-#	L_SCR2:first word of X packed/Unchanged
-
-A15_st:
-	tst.b		BINDEC_FLG(%a6)	# check for denorm
-	beq.b		not_denorm
-	ftest.x		%fp0		# test for zero
-	fbeq.w		den_zero	# if zero, use k-factor or 4933
-	fmov.l		%d6,%fp0	# float ILOG
-	fabs.x		%fp0		# get abs of ILOG
-	bra.b		convrt
-den_zero:
-	tst.l		%d7		# check sign of the k-factor
-	blt.b		use_ilog	# if negative, use ILOG
-	fmov.s		F4933(%pc),%fp0	# force exponent to 4933
-	bra.b		convrt		# do it
-use_ilog:
-	fmov.l		%d6,%fp0	# float ILOG
-	fabs.x		%fp0		# get abs of ILOG
-	bra.b		convrt
-not_denorm:
-	ftest.x		%fp0		# test for zero
-	fbneq.w		not_zero	# if zero, force exponent
-	fmov.s		FONE(%pc),%fp0	# force exponent to 1
-	bra.b		convrt		# do it
-not_zero:
-	fmov.l		%d6,%fp0	# float ILOG
-	fabs.x		%fp0		# get abs of ILOG
-convrt:
-	fdiv.x		24(%a1),%fp0	# compute ILOG/10^4
-	fmov.x		%fp0,FP_SCR1(%a6)	# store fp0 in memory
-	mov.l		4(%a2),%d2	# move word 2 to d2
-	mov.l		8(%a2),%d3	# move word 3 to d3
-	mov.w		(%a2),%d0	# move exp to d0
-	beq.b		x_loop_fin	# if zero, skip the shift
-	sub.w		&0x3ffd,%d0	# subtract off bias
-	neg.w		%d0		# make exp positive
-x_loop:
-	lsr.l		&1,%d2		# shift d2:d3 right
-	roxr.l		&1,%d3		# the number of places
-	dbf.w		%d0,x_loop	# given in d0
-x_loop_fin:
-	clr.l		%d1		# put zero in d1 for addx
-	add.l		&0x00000080,%d3	# inc at bit 6
-	addx.l		%d1,%d2		# continue inc
-	and.l		&0xffffff80,%d3	# strip off lsb not used by 882
-	mov.l		&4,%d0		# put 4 in d0 for binstr call
-	lea.l		L_SCR1(%a6),%a0	# a0 is ptr to L_SCR1 for exp digits
-	bsr		binstr		# call binstr to convert exp
-	mov.l		L_SCR1(%a6),%d0	# load L_SCR1 lword to d0
-	mov.l		&12,%d1		# use d1 for shift count
-	lsr.l		%d1,%d0		# shift d0 right by 12
-	bfins		%d0,FP_SCR0(%a6){&4:&12}	# put e3:e2:e1 in FP_SCR0
-	lsr.l		%d1,%d0		# shift d0 right by 12
-	bfins		%d0,FP_SCR0(%a6){&16:&4}	# put e4 in FP_SCR0
-	tst.b		%d0		# check if e4 is zero
-	beq.b		A16_st		# if zero, skip rest
-	or.l		&opaop_mask,USER_FPSR(%a6)	# set OPERR & AIOP in USER_FPSR
-
-
-# A16. Write sign bits to final string.
-#	   Sigma is bit 31 of initial value; RHO is bit 31 of d6 (ILOG).
-#
-# Register usage:
-#	Input/Output
-#	d0: x/scratch - final is x
-#	d2: x/x
-#	d3: x/x
-#	d4: LEN/Unchanged
-#	d5: ICTR:LAMBDA/LAMBDA:ICTR
-#	d6: ILOG/ILOG adjusted
-#	d7: k-factor/Unchanged
-#	a0: ptr to L_SCR1(a6)/Unchanged
-#	a1: ptr to PTENxx array/Unchanged
-#	a2: ptr to FP_SCR1(a6)/Unchanged
-#	fp0: float(ILOG)/Unchanged
-#	fp1: 10^ISCALE/Unchanged
-#	fp2: 10^LEN/Unchanged
-#	F_SCR1:BCD result with correct signs
-#	F_SCR2:ILOG/10^4
-#	L_SCR1:Exponent digits on return from binstr
-#	L_SCR2:first word of X packed/Unchanged
-
-A16_st:
-	clr.l		%d0		# clr d0 for collection of signs
-	and.b		&0x0f,FP_SCR0(%a6)	# clear first nibble of FP_SCR0
-	tst.l		L_SCR2(%a6)	# check sign of original mantissa
-	bge.b		mant_p		# if pos, don't set SM
-	mov.l		&2,%d0		# move 2 in to d0 for SM
-mant_p:
-	tst.l		%d6		# check sign of ILOG
-	bge.b		wr_sgn		# if pos, don't set SE
-	addq.l		&1,%d0		# set bit 0 in d0 for SE
-wr_sgn:
-	bfins		%d0,FP_SCR0(%a6){&0:&2}	# insert SM and SE into FP_SCR0
-
-# Clean up and restore all registers used.
-
-	fmov.l		&0,%fpsr	# clear possible inex2/ainex bits
-	fmovm.x		(%sp)+,&0xe0	#  {%fp0-%fp2}
-	movm.l		(%sp)+,&0x4fc	#  {%d2-%d7/%a2}
-	rts
-
-	global		PTENRN
-PTENRN:
-	long		0x40020000,0xA0000000,0x00000000	# 10 ^ 1
-	long		0x40050000,0xC8000000,0x00000000	# 10 ^ 2
-	long		0x400C0000,0x9C400000,0x00000000	# 10 ^ 4
-	long		0x40190000,0xBEBC2000,0x00000000	# 10 ^ 8
-	long		0x40340000,0x8E1BC9BF,0x04000000	# 10 ^ 16
-	long		0x40690000,0x9DC5ADA8,0x2B70B59E	# 10 ^ 32
-	long		0x40D30000,0xC2781F49,0xFFCFA6D5	# 10 ^ 64
-	long		0x41A80000,0x93BA47C9,0x80E98CE0	# 10 ^ 128
-	long		0x43510000,0xAA7EEBFB,0x9DF9DE8E	# 10 ^ 256
-	long		0x46A30000,0xE319A0AE,0xA60E91C7	# 10 ^ 512
-	long		0x4D480000,0xC9767586,0x81750C17	# 10 ^ 1024
-	long		0x5A920000,0x9E8B3B5D,0xC53D5DE5	# 10 ^ 2048
-	long		0x75250000,0xC4605202,0x8A20979B	# 10 ^ 4096
-
-	global		PTENRP
-PTENRP:
-	long		0x40020000,0xA0000000,0x00000000	# 10 ^ 1
-	long		0x40050000,0xC8000000,0x00000000	# 10 ^ 2
-	long		0x400C0000,0x9C400000,0x00000000	# 10 ^ 4
-	long		0x40190000,0xBEBC2000,0x00000000	# 10 ^ 8
-	long		0x40340000,0x8E1BC9BF,0x04000000	# 10 ^ 16
-	long		0x40690000,0x9DC5ADA8,0x2B70B59E	# 10 ^ 32
-	long		0x40D30000,0xC2781F49,0xFFCFA6D6	# 10 ^ 64
-	long		0x41A80000,0x93BA47C9,0x80E98CE0	# 10 ^ 128
-	long		0x43510000,0xAA7EEBFB,0x9DF9DE8E	# 10 ^ 256
-	long		0x46A30000,0xE319A0AE,0xA60E91C7	# 10 ^ 512
-	long		0x4D480000,0xC9767586,0x81750C18	# 10 ^ 1024
-	long		0x5A920000,0x9E8B3B5D,0xC53D5DE5	# 10 ^ 2048
-	long		0x75250000,0xC4605202,0x8A20979B	# 10 ^ 4096
-
-	global		PTENRM
-PTENRM:
-	long		0x40020000,0xA0000000,0x00000000	# 10 ^ 1
-	long		0x40050000,0xC8000000,0x00000000	# 10 ^ 2
-	long		0x400C0000,0x9C400000,0x00000000	# 10 ^ 4
-	long		0x40190000,0xBEBC2000,0x00000000	# 10 ^ 8
-	long		0x40340000,0x8E1BC9BF,0x04000000	# 10 ^ 16
-	long		0x40690000,0x9DC5ADA8,0x2B70B59D	# 10 ^ 32
-	long		0x40D30000,0xC2781F49,0xFFCFA6D5	# 10 ^ 64
-	long		0x41A80000,0x93BA47C9,0x80E98CDF	# 10 ^ 128
-	long		0x43510000,0xAA7EEBFB,0x9DF9DE8D	# 10 ^ 256
-	long		0x46A30000,0xE319A0AE,0xA60E91C6	# 10 ^ 512
-	long		0x4D480000,0xC9767586,0x81750C17	# 10 ^ 1024
-	long		0x5A920000,0x9E8B3B5D,0xC53D5DE4	# 10 ^ 2048
-	long		0x75250000,0xC4605202,0x8A20979A	# 10 ^ 4096
-
-#########################################################################
-# binstr(): Converts a 64-bit binary integer to bcd.			#
-#									#
-# INPUT *************************************************************** #
-#	d2:d3 = 64-bit binary integer					#
-#	d0    = desired length (LEN)					#
-#	a0    = pointer to start in memory for bcd characters		#
-#		(This pointer must point to byte 4 of the first		#
-#		 lword of the packed decimal memory string.)		#
-#									#
-# OUTPUT ************************************************************** #
-#	a0 = pointer to LEN bcd digits representing the 64-bit integer.	#
-#									#
-# ALGORITHM ***********************************************************	#
-#	The 64-bit binary is assumed to have a decimal point before	#
-#	bit 63.  The fraction is multiplied by 10 using a mul by 2	#
-#	shift and a mul by 8 shift.  The bits shifted out of the	#
-#	msb form a decimal digit.  This process is iterated until	#
-#	LEN digits are formed.						#
-#									#
-# A1. Init d7 to 1.  D7 is the byte digit counter, and if 1, the	#
-#     digit formed will be assumed the least significant.  This is	#
-#     to force the first byte formed to have a 0 in the upper 4 bits.	#
-#									#
-# A2. Beginning of the loop:						#
-#     Copy the fraction in d2:d3 to d4:d5.				#
-#									#
-# A3. Multiply the fraction in d2:d3 by 8 using bit-field		#
-#     extracts and shifts.  The three msbs from d2 will go into d1.	#
-#									#
-# A4. Multiply the fraction in d4:d5 by 2 using shifts.  The msb	#
-#     will be collected by the carry.					#
-#									#
-# A5. Add using the carry the 64-bit quantities in d2:d3 and d4:d5	#
-#     into d2:d3.  D1 will contain the bcd digit formed.		#
-#									#
-# A6. Test d7.  If zero, the digit formed is the ms digit.  If non-	#
-#     zero, it is the ls digit.  Put the digit in its place in the	#
-#     upper word of d0.  If it is the ls digit, write the word		#
-#     from d0 to memory.						#
-#									#
-# A7. Decrement d6 (LEN counter) and repeat the loop until zero.	#
-#									#
-#########################################################################
-
-#	Implementation Notes:
-#
-#	The registers are used as follows:
-#
-#		d0: LEN counter
-#		d1: temp used to form the digit
-#		d2: upper 32-bits of fraction for mul by 8
-#		d3: lower 32-bits of fraction for mul by 8
-#		d4: upper 32-bits of fraction for mul by 2
-#		d5: lower 32-bits of fraction for mul by 2
-#		d6: temp for bit-field extracts
-#		d7: byte digit formation word;digit count {0,1}
-#		a0: pointer into memory for packed bcd string formation
-#
-
-	global		binstr
-binstr:
-	movm.l		&0xff00,-(%sp)	#  {%d0-%d7}
-
-#
-# A1: Init d7
-#
-	mov.l		&1,%d7		# init d7 for second digit
-	subq.l		&1,%d0		# for dbf d0 would have LEN+1 passes
-#
-# A2. Copy d2:d3 to d4:d5.  Start loop.
-#
-loop:
-	mov.l		%d2,%d4		# copy the fraction before muls
-	mov.l		%d3,%d5		# to d4:d5
-#
-# A3. Multiply d2:d3 by 8; extract msbs into d1.
-#
-	bfextu		%d2{&0:&3},%d1	# copy 3 msbs of d2 into d1
-	asl.l		&3,%d2		# shift d2 left by 3 places
-	bfextu		%d3{&0:&3},%d6	# copy 3 msbs of d3 into d6
-	asl.l		&3,%d3		# shift d3 left by 3 places
-	or.l		%d6,%d2		# or in msbs from d3 into d2
-#
-# A4. Multiply d4:d5 by 2; add carry out to d1.
-#
-	asl.l		&1,%d5		# mul d5 by 2
-	roxl.l		&1,%d4		# mul d4 by 2
-	swap		%d6		# put 0 in d6 lower word
-	addx.w		%d6,%d1		# add in extend from mul by 2
-#
-# A5. Add mul by 8 to mul by 2.  D1 contains the digit formed.
-#
-	add.l		%d5,%d3		# add lower 32 bits
-	nop				# ERRATA FIX #13 (Rev. 1.2 6/6/90)
-	addx.l		%d4,%d2		# add with extend upper 32 bits
-	nop				# ERRATA FIX #13 (Rev. 1.2 6/6/90)
-	addx.w		%d6,%d1		# add in extend from add to d1
-	swap		%d6		# with d6 = 0; put 0 in upper word
-#
-# A6. Test d7 and branch.
-#
-	tst.w		%d7		# if zero, store digit & to loop
-	beq.b		first_d		# if non-zero, form byte & write
-sec_d:
-	swap		%d7		# bring first digit to word d7b
-	asl.w		&4,%d7		# first digit in upper 4 bits d7b
-	add.w		%d1,%d7		# add in ls digit to d7b
-	mov.b		%d7,(%a0)+	# store d7b byte in memory
-	swap		%d7		# put LEN counter in word d7a
-	clr.w		%d7		# set d7a to signal no digits done
-	dbf.w		%d0,loop	# do loop some more!
-	bra.b		end_bstr	# finished, so exit
-first_d:
-	swap		%d7		# put digit word in d7b
-	mov.w		%d1,%d7		# put new digit in d7b
-	swap		%d7		# put LEN counter in word d7a
-	addq.w		&1,%d7		# set d7a to signal first digit done
-	dbf.w		%d0,loop	# do loop some more!
-	swap		%d7		# put last digit in string
-	lsl.w		&4,%d7		# move it to upper 4 bits
-	mov.b		%d7,(%a0)+	# store it in memory string
-#
-# Clean up and return with result in fp0.
-#
-end_bstr:
-	movm.l		(%sp)+,&0xff	#  {%d0-%d7}
-	rts
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	facc_in_b(): dmem_read_byte failed				#
-#	facc_in_w(): dmem_read_word failed				#
-#	facc_in_l(): dmem_read_long failed				#
-#	facc_in_d(): dmem_read of dbl prec failed			#
-#	facc_in_x(): dmem_read of ext prec failed			#
-#									#
-#	facc_out_b(): dmem_write_byte failed				#
-#	facc_out_w(): dmem_write_word failed				#
-#	facc_out_l(): dmem_write_long failed				#
-#	facc_out_d(): dmem_write of dbl prec failed			#
-#	facc_out_x(): dmem_write of ext prec failed			#
-#									#
-# XREF ****************************************************************	#
-#	_real_access() - exit through access error handler		#
-#									#
-# INPUT ***************************************************************	#
-#	None								#
-#									#
-# OUTPUT **************************************************************	#
-#	None								#
-#									#
-# ALGORITHM ***********************************************************	#
-#	Flow jumps here when an FP data fetch call gets an error	#
-# result. This means the operating system wants an access error frame	#
-# made out of the current exception stack frame.			#
-#	So, we first call restore() which makes sure that any updated	#
-# -(an)+ register gets returned to its pre-exception value and then	#
-# we change the stack to an access error stack frame.			#
-#									#
-#########################################################################
-
-facc_in_b:
-	movq.l		&0x1,%d0			# one byte
-	bsr.w		restore				# fix An
-
-	mov.w		&0x0121,EXC_VOFF(%a6)		# set FSLW
-	bra.w		facc_finish
-
-facc_in_w:
-	movq.l		&0x2,%d0			# two bytes
-	bsr.w		restore				# fix An
-
-	mov.w		&0x0141,EXC_VOFF(%a6)		# set FSLW
-	bra.b		facc_finish
-
-facc_in_l:
-	movq.l		&0x4,%d0			# four bytes
-	bsr.w		restore				# fix An
-
-	mov.w		&0x0101,EXC_VOFF(%a6)		# set FSLW
-	bra.b		facc_finish
-
-facc_in_d:
-	movq.l		&0x8,%d0			# eight bytes
-	bsr.w		restore				# fix An
-
-	mov.w		&0x0161,EXC_VOFF(%a6)		# set FSLW
-	bra.b		facc_finish
-
-facc_in_x:
-	movq.l		&0xc,%d0			# twelve bytes
-	bsr.w		restore				# fix An
-
-	mov.w		&0x0161,EXC_VOFF(%a6)		# set FSLW
-	bra.b		facc_finish
-
-################################################################
-
-facc_out_b:
-	movq.l		&0x1,%d0			# one byte
-	bsr.w		restore				# restore An
-
-	mov.w		&0x00a1,EXC_VOFF(%a6)		# set FSLW
-	bra.b		facc_finish
-
-facc_out_w:
-	movq.l		&0x2,%d0			# two bytes
-	bsr.w		restore				# restore An
-
-	mov.w		&0x00c1,EXC_VOFF(%a6)		# set FSLW
-	bra.b		facc_finish
-
-facc_out_l:
-	movq.l		&0x4,%d0			# four bytes
-	bsr.w		restore				# restore An
-
-	mov.w		&0x0081,EXC_VOFF(%a6)		# set FSLW
-	bra.b		facc_finish
-
-facc_out_d:
-	movq.l		&0x8,%d0			# eight bytes
-	bsr.w		restore				# restore An
-
-	mov.w		&0x00e1,EXC_VOFF(%a6)		# set FSLW
-	bra.b		facc_finish
-
-facc_out_x:
-	mov.l		&0xc,%d0			# twelve bytes
-	bsr.w		restore				# restore An
-
-	mov.w		&0x00e1,EXC_VOFF(%a6)		# set FSLW
-
-# here's where we actually create the access error frame from the
-# current exception stack frame.
-facc_finish:
-	mov.l		USER_FPIAR(%a6),EXC_PC(%a6) # store current PC
-
-	fmovm.x		EXC_FPREGS(%a6),&0xc0	# restore fp0-fp1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-
-	unlk		%a6
-
-	mov.l		(%sp),-(%sp)		# store SR, hi(PC)
-	mov.l		0x8(%sp),0x4(%sp)	# store lo(PC)
-	mov.l		0xc(%sp),0x8(%sp)	# store EA
-	mov.l		&0x00000001,0xc(%sp)	# store FSLW
-	mov.w		0x6(%sp),0xc(%sp)	# fix FSLW (size)
-	mov.w		&0x4008,0x6(%sp)	# store voff
-
-	btst		&0x5,(%sp)		# supervisor or user mode?
-	beq.b		facc_out2		# user
-	bset		&0x2,0xd(%sp)		# set supervisor TM bit
-
-facc_out2:
-	bra.l		_real_access
-
-##################################################################
-
-# if the effective addressing mode was predecrement or postincrement,
-# the emulation has already changed its value to the correct post-
-# instruction value. but since we're exiting to the access error
-# handler, then AN must be returned to its pre-instruction value.
-# we do that here.
-restore:
-	mov.b		EXC_OPWORD+0x1(%a6),%d1
-	andi.b		&0x38,%d1		# extract opmode
-	cmpi.b		%d1,&0x18		# postinc?
-	beq.w		rest_inc
-	cmpi.b		%d1,&0x20		# predec?
-	beq.w		rest_dec
-	rts
-
-rest_inc:
-	mov.b		EXC_OPWORD+0x1(%a6),%d1
-	andi.w		&0x0007,%d1		# fetch An
-
-	mov.w		(tbl_rest_inc.b,%pc,%d1.w*2),%d1
-	jmp		(tbl_rest_inc.b,%pc,%d1.w*1)
-
-tbl_rest_inc:
-	short		ri_a0 - tbl_rest_inc
-	short		ri_a1 - tbl_rest_inc
-	short		ri_a2 - tbl_rest_inc
-	short		ri_a3 - tbl_rest_inc
-	short		ri_a4 - tbl_rest_inc
-	short		ri_a5 - tbl_rest_inc
-	short		ri_a6 - tbl_rest_inc
-	short		ri_a7 - tbl_rest_inc
-
-ri_a0:
-	sub.l		%d0,EXC_DREGS+0x8(%a6)	# fix stacked a0
-	rts
-ri_a1:
-	sub.l		%d0,EXC_DREGS+0xc(%a6)	# fix stacked a1
-	rts
-ri_a2:
-	sub.l		%d0,%a2			# fix a2
-	rts
-ri_a3:
-	sub.l		%d0,%a3			# fix a3
-	rts
-ri_a4:
-	sub.l		%d0,%a4			# fix a4
-	rts
-ri_a5:
-	sub.l		%d0,%a5			# fix a5
-	rts
-ri_a6:
-	sub.l		%d0,(%a6)		# fix stacked a6
-	rts
-# if it's a fmove out instruction, we don't have to fix a7
-# because we hadn't changed it yet. if it's an opclass two
-# instruction (data moved in) and the exception was in supervisor
-# mode, then also also wasn't updated. if it was user mode, then
-# restore the correct a7 which is in the USP currently.
-ri_a7:
-	cmpi.b		EXC_VOFF(%a6),&0x30	# move in or out?
-	bne.b		ri_a7_done		# out
-
-	btst		&0x5,EXC_SR(%a6)	# user or supervisor?
-	bne.b		ri_a7_done		# supervisor
-	movc		%usp,%a0		# restore USP
-	sub.l		%d0,%a0
-	movc		%a0,%usp
-ri_a7_done:
-	rts
-
-# need to invert adjustment value if the <ea> was predec
-rest_dec:
-	neg.l		%d0
-	bra.b		rest_inc
diff --git a/ANDROID_3.4.5/arch/m68k/ifpsp060/src/ftest.S b/ANDROID_3.4.5/arch/m68k/ifpsp060/src/ftest.S
deleted file mode 100644
index 1f947915..00000000
--- a/ANDROID_3.4.5/arch/m68k/ifpsp060/src/ftest.S
+++ /dev/null
@@ -1,1456 +0,0 @@
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-MOTOROLA MICROPROCESSOR & MEMORY TECHNOLOGY GROUP
-M68000 Hi-Performance Microprocessor Division
-M68060 Software Package
-Production Release P1.00 -- October 10, 1994
-
-M68060 Software Package Copyright © 1993, 1994 Motorola Inc.  All rights reserved.
-
-THE SOFTWARE is provided on an "AS IS" basis and without warranty.
-To the maximum extent permitted by applicable law,
-MOTOROLA DISCLAIMS ALL WARRANTIES WHETHER EXPRESS OR IMPLIED,
-INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
-and any warranty against infringement with regard to the SOFTWARE
-(INCLUDING ANY MODIFIED VERSIONS THEREOF) and any accompanying written materials.
-
-To the maximum extent permitted by applicable law,
-IN NO EVENT SHALL MOTOROLA BE LIABLE FOR ANY DAMAGES WHATSOEVER
-(INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS,
-BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, OR OTHER PECUNIARY LOSS)
-ARISING OF THE USE OR INABILITY TO USE THE SOFTWARE.
-Motorola assumes no responsibility for the maintenance and support of the SOFTWARE.
-
-You are hereby granted a copyright license to use, modify, and distribute the SOFTWARE
-so long as this entire notice is retained without alteration in any modified and/or
-redistributed versions, and that such modified versions are clearly identified as such.
-No licenses are granted by implication, estoppel or otherwise under any patents
-or trademarks of Motorola, Inc.
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-#############################################
-set	SREGS,		-64
-set	IREGS,		-128
-set	IFPREGS,	-224
-set	SFPREGS,	-320
-set	IFPCREGS,	-332
-set	SFPCREGS,	-344
-set	ICCR,		-346
-set	SCCR,		-348
-set	TESTCTR,	-352
-set	DATA,		-384
-
-#############################################
-TESTTOP:
-	bra.l		_060TESTS_
-	short		0x0000
-
-	bra.l		_060TESTS_unimp
-	short		0x0000
-
-	bra.l		_060TESTS_enable
-	short		0x0000
-
-start_str:
-	string		"Testing 68060 FPSP started:\n"
-
-start_str_unimp:
-	string		"Testing 68060 FPSP unimplemented instruction started:\n"
-
-start_str_enable:
-	string		"Testing 68060 FPSP exception enabled started:\n"
-
-pass_str:
-	string		"passed\n"
-
-fail_str:
-	string		" failed\n"
-
-	align		0x4
-chk_test:
-	tst.l		%d0
-	bne.b		test_fail
-test_pass:
-	pea		pass_str(%pc)
-	bsr.l		_print_str
-	addq.l		&0x4,%sp
-	rts
-test_fail:
-	mov.l		%d1,-(%sp)
-	bsr.l		_print_num
-	addq.l		&0x4,%sp
-
-	pea		fail_str(%pc)
-	bsr.l		_print_str
-	addq.l		&0x4,%sp
-	rts
-
-#############################################
-_060TESTS_:
-	link		%a6,&-384
-
-	movm.l		&0x3f3c,-(%sp)
-	fmovm.x		&0xff,-(%sp)
-
-	pea		start_str(%pc)
-	bsr.l		_print_str
-	addq.l		&0x4,%sp
-
-### effadd
-	clr.l		TESTCTR(%a6)
-	pea		effadd_str(%pc)
-	bsr.l		_print_str
-	addq.l		&0x4,%sp
-
-	bsr.l		effadd_0
-
-	bsr.l		chk_test
-
-### unsupp
-	clr.l		TESTCTR(%a6)
-	pea		unsupp_str(%pc)
-	bsr.l		_print_str
-	addq.l		&0x4,%sp
-
-	bsr.l		unsupp_0
-
-	bsr.l		chk_test
-
-### ovfl non-maskable
-	clr.l		TESTCTR(%a6)
-	pea		ovfl_nm_str(%pc)
-	bsr.l		_print_str
-	bsr.l		ovfl_nm_0
-
-	bsr.l		chk_test
-
-### unfl non-maskable
-	clr.l		TESTCTR(%a6)
-	pea		unfl_nm_str(%pc)
-	bsr.l		_print_str
-	bsr.l		unfl_nm_0
-
-	bsr.l		chk_test
-
-	movm.l		(%sp)+,&0x3cfc
-	fmovm.x		(%sp)+,&0xff
-
-	unlk		%a6
-	rts
-
-_060TESTS_unimp:
-	link		%a6,&-384
-
-	movm.l		&0x3f3c,-(%sp)
-	fmovm.x		&0xff,-(%sp)
-
-	pea		start_str_unimp(%pc)
-	bsr.l		_print_str
-	addq.l		&0x4,%sp
-
-### unimp
-	clr.l		TESTCTR(%a6)
-	pea		unimp_str(%pc)
-	bsr.l		_print_str
-	addq.l		&0x4,%sp
-
-	bsr.l		unimp_0
-
-	bsr.l		chk_test
-
-	movm.l		(%sp)+,&0x3cfc
-	fmovm.x		(%sp)+,&0xff
-
-	unlk		%a6
-	rts
-
-_060TESTS_enable:
-	link		%a6,&-384
-
-	movm.l		&0x3f3c,-(%sp)
-	fmovm.x		&0xff,-(%sp)
-
-	pea		start_str_enable(%pc)
-	bsr.l		_print_str
-	addq.l		&0x4,%sp
-
-### snan
-	clr.l		TESTCTR(%a6)
-	pea		snan_str(%pc)
-	bsr.l		_print_str
-	bsr.l		snan_0
-
-	bsr.l		chk_test
-
-### operr
-	clr.l		TESTCTR(%a6)
-	pea		operr_str(%pc)
-	bsr.l		_print_str
-	bsr.l		operr_0
-
-	bsr.l		chk_test
-
-### ovfl
-	clr.l		TESTCTR(%a6)
-	pea		ovfl_str(%pc)
-	bsr.l		_print_str
-	bsr.l		ovfl_0
-
-	bsr.l		chk_test
-
-### unfl
-	clr.l		TESTCTR(%a6)
-	pea		unfl_str(%pc)
-	bsr.l		_print_str
-	bsr.l		unfl_0
-
-	bsr.l		chk_test
-
-### dz
-	clr.l		TESTCTR(%a6)
-	pea		dz_str(%pc)
-	bsr.l		_print_str
-	bsr.l		dz_0
-
-	bsr.l		chk_test
-
-### inexact
-	clr.l		TESTCTR(%a6)
-	pea		inex_str(%pc)
-	bsr.l		_print_str
-	bsr.l		inex_0
-
-	bsr.l		chk_test
-
-	movm.l		(%sp)+,&0x3cfc
-	fmovm.x		(%sp)+,&0xff
-
-	unlk		%a6
-	rts
-
-#############################################
-#############################################
-
-unimp_str:
-	string		"\tUnimplemented FP instructions..."
-
-	align		0x4
-unimp_0:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-	fmovm.x		DEF_FPREGS(%pc),&0xff
-	fmovm.l		DEF_FPCREGS(%pc),%fpcr,%fpsr,%fpiar
-
-	mov.w		&0x0000,ICCR(%a6)
-	movm.l		&0x7fff,IREGS(%a6)
-	fmovm.x		&0xff,IFPREGS(%a6)
-	fmovm.l		%fpcr,%fpsr,%fpiar,IFPCREGS(%a6)
-
-	mov.l		&0x40000000,DATA+0x0(%a6)
-	mov.l		&0xc90fdaa2,DATA+0x4(%a6)
-	mov.l		&0x2168c235,DATA+0x8(%a6)
-
-	mov.w		&0x0000,%cc
-unimp_0_pc:
-	fsin.x		DATA(%a6),%fp0
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0x7fff,SREGS(%a6)
-	fmovm.x		&0xff,SFPREGS(%a6)
-	fmovm.l		%fpcr,%fpsr,%fpiar,SFPCREGS(%a6)
-
-	mov.l		&0xbfbf0000,IFPREGS+0x0(%a6)
-	mov.l		&0x80000000,IFPREGS+0x4(%a6)
-	mov.l		&0x00000000,IFPREGS+0x8(%a6)
-	mov.l		&0x08000208,IFPCREGS+0x4(%a6)
-	lea		unimp_0_pc(%pc),%a0
-	mov.l		%a0,IFPCREGS+0x8(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-	bsr.l		chkfpregs
-	tst.b		%d0
-	bne.l		error
-
-unimp_1:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-	fmovm.x		DEF_FPREGS(%pc),&0xff
-	fmovm.l		DEF_FPCREGS(%pc),%fpcr,%fpsr,%fpiar
-
-	mov.w		&0x0000,ICCR(%a6)
-	movm.l		&0x7fff,IREGS(%a6)
-	fmovm.x		&0xff,IFPREGS(%a6)
-	fmovm.l		%fpcr,%fpsr,%fpiar,IFPCREGS(%a6)
-
-	mov.l		&0x3ffe0000,DATA+0x0(%a6)
-	mov.l		&0xc90fdaa2,DATA+0x4(%a6)
-	mov.l		&0x2168c235,DATA+0x8(%a6)
-
-	mov.w		&0x0000,%cc
-unimp_1_pc:
-	ftan.x		DATA(%a6),%fp0
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0x7fff,SREGS(%a6)
-	fmovm.x		&0xff,SFPREGS(%a6)
-	fmovm.l		%fpcr,%fpsr,%fpiar,SFPCREGS(%a6)
-
-	mov.l		&0x3fff0000,IFPREGS+0x0(%a6)
-	mov.l		&0x80000000,IFPREGS+0x4(%a6)
-	mov.l		&0x00000000,IFPREGS+0x8(%a6)
-	mov.l		&0x00000208,IFPCREGS+0x4(%a6)
-	lea		unimp_1_pc(%pc),%a0
-	mov.l		%a0,IFPCREGS+0x8(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-	bsr.l		chkfpregs
-	tst.b		%d0
-	bne.l		error
-
-# fmovecr
-unimp_2:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-	fmovm.x		DEF_FPREGS(%pc),&0xff
-	fmovm.l		DEF_FPCREGS(%pc),%fpcr,%fpsr,%fpiar
-
-	mov.w		&0x0000,ICCR(%a6)
-	movm.l		&0x7fff,IREGS(%a6)
-	fmovm.x		&0xff,IFPREGS(%a6)
-	fmovm.l		%fpcr,%fpsr,%fpiar,IFPCREGS(%a6)
-
-	mov.w		&0x0000,%cc
-unimp_2_pc:
-	fmovcr.x	&0x31,%fp0
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0x7fff,SREGS(%a6)
-	fmovm.x		&0xff,SFPREGS(%a6)
-	fmovm.l		%fpcr,%fpsr,%fpiar,SFPCREGS(%a6)
-
-	mov.l		&0x40000000,IFPREGS+0x0(%a6)
-	mov.l		&0x935d8ddd,IFPREGS+0x4(%a6)
-	mov.l		&0xaaa8ac17,IFPREGS+0x8(%a6)
-	mov.l		&0x00000208,IFPCREGS+0x4(%a6)
-	lea		unimp_2_pc(%pc),%a0
-	mov.l		%a0,IFPCREGS+0x8(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-	bsr.l		chkfpregs
-	tst.b		%d0
-	bne.l		error
-
-# fscc
-unimp_3:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-	fmovm.x		DEF_FPREGS(%pc),&0xff
-	fmovm.l		DEF_FPCREGS(%pc),%fpcr,%fpsr,%fpiar
-
-	fmov.l		&0x0f000000,%fpsr
-	mov.l		&0x00,%d7
-
-	mov.w		&0x0000,ICCR(%a6)
-	movm.l		&0x7fff,IREGS(%a6)
-	fmovm.x		&0xff,IFPREGS(%a6)
-	fmovm.l		%fpcr,%fpsr,%fpiar,IFPCREGS(%a6)
-
-	mov.w		&0x0000,%cc
-unimp_3_pc:
-	fsgt		%d7
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0x7fff,SREGS(%a6)
-	fmovm.x		&0xff,SFPREGS(%a6)
-	fmovm.l		%fpcr,%fpsr,%fpiar,SFPCREGS(%a6)
-	mov.l		&0x0f008080,IFPCREGS+0x4(%a6)
-	lea		unimp_3_pc(%pc),%a0
-	mov.l		%a0,IFPCREGS+0x8(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-	bsr.l		chkfpregs
-	tst.b		%d0
-	bne.l		error
-
-# fdbcc
-unimp_4:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-	fmovm.x		DEF_FPREGS(%pc),&0xff
-	fmovm.l		DEF_FPCREGS(%pc),%fpcr,%fpsr,%fpiar
-
-	fmov.l		&0x0f000000,%fpsr
-	mov.l		&0x2,%d7
-
-	mov.w		&0x0000,ICCR(%a6)
-	movm.l		&0x7fff,IREGS(%a6)
-	fmovm.x		&0xff,IFPREGS(%a6)
-	fmovm.l		%fpcr,%fpsr,%fpiar,IFPCREGS(%a6)
-
-	mov.w		&0x0000,%cc
-unimp_4_pc:
-	fdbgt.w		%d7,unimp_4_pc
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0x7fff,SREGS(%a6)
-	fmovm.x		&0xff,SFPREGS(%a6)
-	fmovm.l		%fpcr,%fpsr,%fpiar,SFPCREGS(%a6)
-	mov.w		&0xffff,IREGS+28+2(%a6)
-	mov.l		&0x0f008080,IFPCREGS+0x4(%a6)
-	lea		unimp_4_pc(%pc),%a0
-	mov.l		%a0,IFPCREGS+0x8(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-	bsr.l		chkfpregs
-	tst.b		%d0
-	bne.l		error
-
-# ftrapcc
-unimp_5:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-	fmovm.x		DEF_FPREGS(%pc),&0xff
-	fmovm.l		DEF_FPCREGS(%pc),%fpcr,%fpsr,%fpiar
-
-	fmov.l		&0x0f000000,%fpsr
-
-	mov.w		&0x0000,ICCR(%a6)
-	movm.l		&0x7fff,IREGS(%a6)
-	fmovm.x		&0xff,IFPREGS(%a6)
-	fmovm.l		%fpcr,%fpsr,%fpiar,IFPCREGS(%a6)
-
-	mov.w		&0x0000,%cc
-unimp_5_pc:
-	ftpgt.l		&0xabcdef01
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0x7fff,SREGS(%a6)
-	fmovm.x		&0xff,SFPREGS(%a6)
-	fmovm.l		%fpcr,%fpsr,%fpiar,SFPCREGS(%a6)
-	mov.l		&0x0f008080,IFPCREGS+0x4(%a6)
-	lea		unimp_5_pc(%pc),%a0
-	mov.l		%a0,IFPCREGS+0x8(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-	bsr.l		chkfpregs
-	tst.b		%d0
-	bne.l		error
-
-	clr.l		%d0
-	rts
-
-#############################################
-
-effadd_str:
-	string		"\tUnimplemented <ea>..."
-
-	align		0x4
-effadd_0:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-	fmovm.x		DEF_FPREGS(%pc),&0xff
-	fmovm.l		DEF_FPCREGS(%pc),%fpcr,%fpsr,%fpiar
-
-	mov.w		&0x0000,ICCR(%a6)
-	movm.l		&0x7fff,IREGS(%a6)
-	fmovm.x		&0xff,IFPREGS(%a6)
-	fmovm.l		%fpcr,%fpsr,%fpiar,IFPCREGS(%a6)
-
-	fmov.b		&0x2,%fp0
-
-	mov.w		&0x0000,%cc
-effadd_0_pc:
-	fmul.x		&0xc00000008000000000000000,%fp0
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0x7fff,SREGS(%a6)
-	fmovm.x		&0xff,SFPREGS(%a6)
-	fmovm.l		%fpcr,%fpsr,%fpiar,SFPCREGS(%a6)
-
-	mov.l		&0xc0010000,IFPREGS+0x0(%a6)
-	mov.l		&0x80000000,IFPREGS+0x4(%a6)
-	mov.l		&0x00000000,IFPREGS+0x8(%a6)
-	mov.l		&0x08000000,IFPCREGS+0x4(%a6)
-	lea		effadd_0_pc(%pc),%a0
-	mov.l		%a0,IFPCREGS+0x8(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-	bsr.l		chkfpregs
-	tst.b		%d0
-	bne.l		error
-
-effadd_1:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-	fmovm.x		DEF_FPREGS(%pc),&0xff
-	fmovm.l		DEF_FPCREGS(%pc),%fpcr,%fpsr,%fpiar
-
-	mov.w		&0x0000,ICCR(%a6)
-	movm.l		&0x7fff,IREGS(%a6)
-	fmovm.x		&0xff,IFPREGS(%a6)
-	fmovm.l		%fpcr,%fpsr,%fpiar,IFPCREGS(%a6)
-
-	mov.w		&0x0000,%cc
-effadd_1_pc:
-	fabs.p		&0xc12300012345678912345678,%fp0
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0x7fff,SREGS(%a6)
-	fmovm.x		&0xff,SFPREGS(%a6)
-	fmovm.l		%fpcr,%fpsr,%fpiar,SFPCREGS(%a6)
-
-	mov.l		&0x3e660000,IFPREGS+0x0(%a6)
-	mov.l		&0xd0ed23e8,IFPREGS+0x4(%a6)
-	mov.l		&0xd14035bc,IFPREGS+0x8(%a6)
-	mov.l		&0x00000108,IFPCREGS+0x4(%a6)
-	lea		effadd_1_pc(%pc),%a0
-	mov.l		%a0,IFPCREGS+0x8(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-	bsr.l		chkfpregs
-	tst.b		%d0
-	bne.l		error
-
-fmovml_0:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-	fmovm.x		DEF_FPREGS(%pc),&0xff
-	fmovm.l		DEF_FPCREGS(%pc),%fpcr,%fpsr,%fpiar
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0x7fff,IREGS(%a6)
-	fmovm.x		&0xff,IFPREGS(%a6)
-	fmovm.l		%fpcr,%fpsr,%fpiar,IFPCREGS(%a6)
-
-	fmovm.l		&0xffffffffffffffff,%fpcr,%fpsr
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0x7fff,SREGS(%a6)
-	fmovm.x		&0xff,SFPREGS(%a6)
-	fmovm.l		%fpcr,%fpsr,%fpiar,SFPCREGS(%a6)
-	mov.l		&0x0000fff0,IFPCREGS+0x0(%a6)
-	mov.l		&0x0ffffff8,IFPCREGS+0x4(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-	bsr.l		chkfpregs
-	tst.b		%d0
-	bne.l		error
-
-fmovml_1:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-	fmovm.x		DEF_FPREGS(%pc),&0xff
-	fmovm.l		DEF_FPCREGS(%pc),%fpcr,%fpsr,%fpiar
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0x7fff,IREGS(%a6)
-	fmovm.x		&0xff,IFPREGS(%a6)
-	fmovm.l		%fpcr,%fpsr,%fpiar,IFPCREGS(%a6)
-
-	fmovm.l		&0xffffffffffffffff,%fpcr,%fpiar
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0x7fff,SREGS(%a6)
-	fmovm.x		&0xff,SFPREGS(%a6)
-	fmovm.l		%fpcr,%fpsr,%fpiar,SFPCREGS(%a6)
-	mov.l		&0x0000fff0,IFPCREGS+0x0(%a6)
-	mov.l		&0xffffffff,IFPCREGS+0x8(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-	bsr.l		chkfpregs
-	tst.b		%d0
-	bne.l		error
-
-fmovml_2:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-	fmovm.x		DEF_FPREGS(%pc),&0xff
-	fmovm.l		DEF_FPCREGS(%pc),%fpcr,%fpsr,%fpiar
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0x7fff,IREGS(%a6)
-	fmovm.x		&0xff,IFPREGS(%a6)
-	fmovm.l		%fpcr,%fpsr,%fpiar,IFPCREGS(%a6)
-
-	fmovm.l		&0xffffffffffffffff,%fpsr,%fpiar
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0x7fff,SREGS(%a6)
-	fmovm.x		&0xff,SFPREGS(%a6)
-	fmovm.l		%fpcr,%fpsr,%fpiar,SFPCREGS(%a6)
-	mov.l		&0x0ffffff8,IFPCREGS+0x4(%a6)
-	mov.l		&0xffffffff,IFPCREGS+0x8(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-	bsr.l		chkfpregs
-	tst.b		%d0
-	bne.l		error
-
-fmovml_3:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-	fmovm.x		DEF_FPREGS(%pc),&0xff
-	fmovm.l		DEF_FPCREGS(%pc),%fpcr,%fpsr,%fpiar
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0x7fff,IREGS(%a6)
-	fmovm.x		&0xff,IFPREGS(%a6)
-	fmovm.l		%fpcr,%fpsr,%fpiar,IFPCREGS(%a6)
-
-	fmovm.l		&0xffffffffffffffffffffffff,%fpcr,%fpsr,%fpiar
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0x7fff,SREGS(%a6)
-	fmovm.x		&0xff,SFPREGS(%a6)
-	fmovm.l		%fpcr,%fpsr,%fpiar,SFPCREGS(%a6)
-	mov.l		&0x0000fff0,IFPCREGS+0x0(%a6)
-	mov.l		&0x0ffffff8,IFPCREGS+0x4(%a6)
-	mov.l		&0xffffffff,IFPCREGS+0x8(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-	bsr.l		chkfpregs
-	tst.b		%d0
-	bne.l		error
-
-# fmovmx dynamic
-fmovmx_0:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-	fmovm.x		DEF_FPREGS(%pc),&0xff
-	fmovm.l		DEF_FPCREGS(%pc),%fpcr,%fpsr,%fpiar
-
-	fmov.b		&0x1,%fp0
-	fmov.b		&0x2,%fp1
-	fmov.b		&0x3,%fp2
-	fmov.b		&0x4,%fp3
-	fmov.b		&0x5,%fp4
-	fmov.b		&0x6,%fp5
-	fmov.b		&0x7,%fp6
-	fmov.b		&0x8,%fp7
-
-	fmov.l		&0x0,%fpiar
-	mov.l		&0xffffffaa,%d0
-
-	mov.w		&0x0000,ICCR(%a6)
-	movm.l		&0xffff,IREGS(%a6)
-
-	fmovm.l		%fpcr,%fpsr,%fpiar,IFPCREGS(%a6)
-	fmovm.x		&0xff,IFPREGS(%a6)
-
-	mov.w		&0x0000,%cc
-
-	fmovm.x		%d0,-(%sp)
-
-	mov.w		%cc,SCCR(%a6)
-
-	fmovm.l		%fpcr,%fpsr,%fpiar,SFPCREGS(%a6)
-
-	fmov.s		&0x7f800000,%fp1
-	fmov.s		&0x7f800000,%fp3
-	fmov.s		&0x7f800000,%fp5
-	fmov.s		&0x7f800000,%fp7
-
-	fmov.x		(%sp)+,%fp1
-	fmov.x		(%sp)+,%fp3
-	fmov.x		(%sp)+,%fp5
-	fmov.x		(%sp)+,%fp7
-
-	movm.l		&0xffff,SREGS(%a6)
-	fmovm.x		&0xff,SFPREGS(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-	bsr.l		chkfpregs
-	tst.b		%d0
-	bne.l		error
-
-fmovmx_1:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-	fmovm.x		DEF_FPREGS(%pc),&0xff
-	fmovm.l		DEF_FPCREGS(%pc),%fpcr,%fpsr,%fpiar
-
-	fmov.b		&0x1,%fp0
-	fmov.b		&0x2,%fp1
-	fmov.b		&0x3,%fp2
-	fmov.b		&0x4,%fp3
-	fmov.b		&0x5,%fp4
-	fmov.b		&0x6,%fp5
-	fmov.b		&0x7,%fp6
-	fmov.b		&0x8,%fp7
-
-	fmov.x		%fp6,-(%sp)
-	fmov.x		%fp4,-(%sp)
-	fmov.x		%fp2,-(%sp)
-	fmov.x		%fp0,-(%sp)
-
-	fmovm.x		&0xff,IFPREGS(%a6)
-
-	fmov.s		&0x7f800000,%fp6
-	fmov.s		&0x7f800000,%fp4
-	fmov.s		&0x7f800000,%fp2
-	fmov.s		&0x7f800000,%fp0
-
-	fmov.l		&0x0,%fpiar
-	fmov.l		&0x0,%fpsr
-	mov.l		&0xffffffaa,%d0
-
-	mov.w		&0x0000,ICCR(%a6)
-	movm.l		&0xffff,IREGS(%a6)
-
-	fmovm.l		%fpcr,%fpsr,%fpiar,IFPCREGS(%a6)
-
-	mov.w		&0x0000,%cc
-
-	fmovm.x		(%sp)+,%d0
-
-	mov.w		%cc,SCCR(%a6)
-
-	fmovm.l		%fpcr,%fpsr,%fpiar,SFPCREGS(%a6)
-
-	movm.l		&0xffff,SREGS(%a6)
-	fmovm.x		&0xff,SFPREGS(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-	bsr.l		chkfpregs
-	tst.b		%d0
-	bne.l		error
-
-fmovmx_2:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-	fmovm.x		DEF_FPREGS(%pc),&0xff
-	fmovm.l		DEF_FPCREGS(%pc),%fpcr,%fpsr,%fpiar
-
-	fmov.b		&0x1,%fp0
-	fmov.b		&0x2,%fp1
-	fmov.b		&0x3,%fp2
-	fmov.b		&0x4,%fp3
-	fmov.b		&0x5,%fp4
-	fmov.b		&0x6,%fp5
-	fmov.b		&0x7,%fp6
-	fmov.b		&0x8,%fp7
-
-	fmov.l		&0x0,%fpiar
-	mov.l		&0xffffff00,%d0
-
-	mov.w		&0x0000,ICCR(%a6)
-	movm.l		&0xffff,IREGS(%a6)
-
-	fmovm.l		%fpcr,%fpsr,%fpiar,IFPCREGS(%a6)
-	fmovm.x		&0xff,IFPREGS(%a6)
-
-	mov.w		&0x0000,%cc
-
-	fmovm.x		%d0,-(%sp)
-
-	mov.w		%cc,SCCR(%a6)
-
-	fmovm.l		%fpcr,%fpsr,%fpiar,SFPCREGS(%a6)
-
-	movm.l		&0xffff,SREGS(%a6)
-	fmovm.x		&0xff,SFPREGS(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-	bsr.l		chkfpregs
-	tst.b		%d0
-	bne.l		error
-
-	clr.l		%d0
-	rts
-
-###########################################################
-
-# This test will take a non-maskable overflow directly.
-ovfl_nm_str:
-	string		"\tNon-maskable overflow..."
-
-	align		0x4
-ovfl_nm_0:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-	fmovm.x		DEF_FPREGS(%pc),&0xff
-	fmovm.l		DEF_FPCREGS(%pc),%fpcr,%fpsr,%fpiar
-
-	mov.w		&0x0000,ICCR(%a6)
-	movm.l		&0x7fff,IREGS(%a6)
-	fmovm.x		&0xff,IFPREGS(%a6)
-	fmovm.l		%fpcr,%fpsr,%fpiar,IFPCREGS(%a6)
-
-	fmov.b		&0x2,%fp0
-	mov.l		&0x7ffe0000,DATA+0x0(%a6)
-	mov.l		&0x80000000,DATA+0x4(%a6)
-	mov.l		&0x00000000,DATA+0x8(%a6)
-
-	mov.w		&0x0000,%cc
-ovfl_nm_0_pc:
-	fmul.x		DATA(%a6),%fp0
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0x7fff,SREGS(%a6)
-	fmovm.x		&0xff,SFPREGS(%a6)
-	fmovm.l		%fpcr,%fpsr,%fpiar,SFPCREGS(%a6)
-
-	mov.l		&0x7fff0000,IFPREGS+0x0(%a6)
-	mov.l		&0x00000000,IFPREGS+0x4(%a6)
-	mov.l		&0x00000000,IFPREGS+0x8(%a6)
-	mov.l		&0x02001048,IFPCREGS+0x4(%a6)
-	lea		ovfl_nm_0_pc(%pc),%a0
-	mov.l		%a0,IFPCREGS+0x8(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-	bsr.l		chkfpregs
-	tst.b		%d0
-	bne.l		error
-
-	clr.l		%d0
-	rts
-
-###########################################################
-
-# This test will take an overflow directly.
-ovfl_str:
-	string		"\tEnabled overflow..."
-
-	align		0x4
-ovfl_0:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-	fmovm.x		DEF_FPREGS(%pc),&0xff
-	fmovm.l		DEF_FPCREGS(%pc),%fpcr,%fpsr,%fpiar
-
-	mov.w		&0x0000,ICCR(%a6)
-	movm.l		&0x7fff,IREGS(%a6)
-	fmovm.x		&0xff,IFPREGS(%a6)
-	fmov.l		&0x00001000,%fpcr
-	fmovm.l		%fpcr,%fpsr,%fpiar,IFPCREGS(%a6)
-
-	fmov.b		&0x2,%fp0
-	mov.l		&0x7ffe0000,DATA+0x0(%a6)
-	mov.l		&0x80000000,DATA+0x4(%a6)
-	mov.l		&0x00000000,DATA+0x8(%a6)
-
-	mov.w		&0x0000,%cc
-ovfl_0_pc:
-	fmul.x		DATA(%a6),%fp0
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0x7fff,SREGS(%a6)
-	fmovm.x		&0xff,SFPREGS(%a6)
-	fmovm.l		%fpcr,%fpsr,%fpiar,SFPCREGS(%a6)
-
-	mov.l		&0x7fff0000,IFPREGS+0x0(%a6)
-	mov.l		&0x00000000,IFPREGS+0x4(%a6)
-	mov.l		&0x00000000,IFPREGS+0x8(%a6)
-	mov.l		&0x02001048,IFPCREGS+0x4(%a6)
-	lea		ovfl_0_pc(%pc),%a0
-	mov.l		%a0,IFPCREGS+0x8(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-	bsr.l		chkfpregs
-	tst.b		%d0
-	bne.l		error
-
-	clr.l		%d0
-	rts
-
-#####################################################################
-
-# This test will take an underflow directly.
-unfl_str:
-	string		"\tEnabled underflow..."
-
-	align		0x4
-unfl_0:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-	fmovm.x		DEF_FPREGS(%pc),&0xff
-	fmovm.l		DEF_FPCREGS(%pc),%fpcr,%fpsr,%fpiar
-
-	mov.w		&0x0000,ICCR(%a6)
-	movm.l		&0x7fff,IREGS(%a6)
-	fmovm.x		&0xff,IFPREGS(%a6)
-	fmov.l		&0x00000800,%fpcr
-	fmovm.l		%fpcr,%fpsr,%fpiar,IFPCREGS(%a6)
-
-	mov.l		&0x00000000,DATA+0x0(%a6)
-	mov.l		&0x80000000,DATA+0x4(%a6)
-	mov.l		&0x00000000,DATA+0x8(%a6)
-	fmovm.x		DATA(%a6),&0x80
-
-	mov.w		&0x0000,%cc
-unfl_0_pc:
-	fdiv.b		&0x2,%fp0
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0x7fff,SREGS(%a6)
-	fmovm.x		&0xff,SFPREGS(%a6)
-	fmovm.l		%fpcr,%fpsr,%fpiar,SFPCREGS(%a6)
-
-	mov.l		&0x00000000,IFPREGS+0x0(%a6)
-	mov.l		&0x40000000,IFPREGS+0x4(%a6)
-	mov.l		&0x00000000,IFPREGS+0x8(%a6)
-	mov.l		&0x00000800,IFPCREGS+0x4(%a6)
-	lea		unfl_0_pc(%pc),%a0
-	mov.l		%a0,IFPCREGS+0x8(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-	bsr.l		chkfpregs
-	tst.b		%d0
-	bne.l		error
-
-	clr.l		%d0
-	rts
-
-#####################################################################
-
-# This test will take a non-maskable underflow directly.
-unfl_nm_str:
-	string		"\tNon-maskable underflow..."
-
-	align		0x4
-unfl_nm_0:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-	fmovm.x		DEF_FPREGS(%pc),&0xff
-	fmovm.l		DEF_FPCREGS(%pc),%fpcr,%fpsr,%fpiar
-
-	mov.w		&0x0000,ICCR(%a6)
-	movm.l		&0x7fff,IREGS(%a6)
-	fmovm.x		&0xff,IFPREGS(%a6)
-	fmovm.l		%fpcr,%fpsr,%fpiar,IFPCREGS(%a6)
-
-	mov.l		&0x00000000,DATA+0x0(%a6)
-	mov.l		&0x80000000,DATA+0x4(%a6)
-	mov.l		&0x00000000,DATA+0x8(%a6)
-	fmovm.x		DATA(%a6),&0x80
-
-	mov.w		&0x0000,%cc
-unfl_nm_0_pc:
-	fdiv.b		&0x2,%fp0
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0x7fff,SREGS(%a6)
-	fmovm.x		&0xff,SFPREGS(%a6)
-	fmovm.l		%fpcr,%fpsr,%fpiar,SFPCREGS(%a6)
-
-	mov.l		&0x00000000,IFPREGS+0x0(%a6)
-	mov.l		&0x40000000,IFPREGS+0x4(%a6)
-	mov.l		&0x00000000,IFPREGS+0x8(%a6)
-	mov.l		&0x00000800,IFPCREGS+0x4(%a6)
-	lea		unfl_nm_0_pc(%pc),%a0
-	mov.l		%a0,IFPCREGS+0x8(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-	bsr.l		chkfpregs
-	tst.b		%d0
-	bne.l		error
-
-	clr.l		%d0
-	rts
-
-#####################################################################
-
-inex_str:
-	string		"\tEnabled inexact..."
-
-	align		0x4
-inex_0:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-	fmovm.x		DEF_FPREGS(%pc),&0xff
-	fmovm.l		DEF_FPCREGS(%pc),%fpcr,%fpsr,%fpiar
-
-	mov.w		&0x0000,ICCR(%a6)
-	movm.l		&0x7fff,IREGS(%a6)
-	fmovm.x		&0xff,IFPREGS(%a6)
-	fmov.l		&0x00000200,%fpcr		# enable inexact
-	fmovm.l		%fpcr,%fpsr,%fpiar,IFPCREGS(%a6)
-
-	mov.l		&0x50000000,DATA+0x0(%a6)
-	mov.l		&0x80000000,DATA+0x4(%a6)
-	mov.l		&0x00000000,DATA+0x8(%a6)
-	fmovm.x		DATA(%a6),&0x80
-
-	mov.w		&0x0000,%cc
-inex_0_pc:
-	fadd.b		&0x2,%fp0
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0x7fff,SREGS(%a6)
-	fmovm.x		&0xff,SFPREGS(%a6)
-	fmovm.l		%fpcr,%fpsr,%fpiar,SFPCREGS(%a6)
-
-	mov.l		&0x50000000,IFPREGS+0x0(%a6)
-	mov.l		&0x80000000,IFPREGS+0x4(%a6)
-	mov.l		&0x00000000,IFPREGS+0x8(%a6)
-	mov.l		&0x00000208,IFPCREGS+0x4(%a6)
-	lea		inex_0_pc(%pc),%a0
-	mov.l		%a0,IFPCREGS+0x8(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-	bsr.l		chkfpregs
-	tst.b		%d0
-	bne.l		error
-
-	clr.l		%d0
-	rts
-
-#####################################################################
-
-snan_str:
-	string		"\tEnabled SNAN..."
-
-	align		0x4
-snan_0:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-	fmovm.x		DEF_FPREGS(%pc),&0xff
-	fmovm.l		DEF_FPCREGS(%pc),%fpcr,%fpsr,%fpiar
-
-	mov.w		&0x0000,ICCR(%a6)
-	movm.l		&0x7fff,IREGS(%a6)
-	fmovm.x		&0xff,IFPREGS(%a6)
-	fmov.l		&0x00004000,%fpcr		# enable SNAN
-	fmovm.l		%fpcr,%fpsr,%fpiar,IFPCREGS(%a6)
-
-	mov.l		&0xffff0000,DATA+0x0(%a6)
-	mov.l		&0x00000000,DATA+0x4(%a6)
-	mov.l		&0x00000001,DATA+0x8(%a6)
-	fmovm.x		DATA(%a6),&0x80
-
-	mov.w		&0x0000,%cc
-snan_0_pc:
-	fadd.b		&0x2,%fp0
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0x7fff,SREGS(%a6)
-	fmovm.x		&0xff,SFPREGS(%a6)
-	fmovm.l		%fpcr,%fpsr,%fpiar,SFPCREGS(%a6)
-
-	mov.l		&0xffff0000,IFPREGS+0x0(%a6)
-	mov.l		&0x00000000,IFPREGS+0x4(%a6)
-	mov.l		&0x00000001,IFPREGS+0x8(%a6)
-	mov.l		&0x09004080,IFPCREGS+0x4(%a6)
-	lea		snan_0_pc(%pc),%a0
-	mov.l		%a0,IFPCREGS+0x8(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-	bsr.l		chkfpregs
-	tst.b		%d0
-	bne.l		error
-
-	clr.l		%d0
-	rts
-
-#####################################################################
-
-operr_str:
-	string		"\tEnabled OPERR..."
-
-	align		0x4
-operr_0:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-	fmovm.x		DEF_FPREGS(%pc),&0xff
-	fmovm.l		DEF_FPCREGS(%pc),%fpcr,%fpsr,%fpiar
-
-	mov.w		&0x0000,ICCR(%a6)
-	movm.l		&0x7fff,IREGS(%a6)
-	fmovm.x		&0xff,IFPREGS(%a6)
-	fmov.l		&0x00002000,%fpcr		# enable OPERR
-	fmovm.l		%fpcr,%fpsr,%fpiar,IFPCREGS(%a6)
-
-	mov.l		&0xffff0000,DATA+0x0(%a6)
-	mov.l		&0x00000000,DATA+0x4(%a6)
-	mov.l		&0x00000000,DATA+0x8(%a6)
-	fmovm.x		DATA(%a6),&0x80
-
-	mov.w		&0x0000,%cc
-operr_0_pc:
-	fadd.s		&0x7f800000,%fp0
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0x7fff,SREGS(%a6)
-	fmovm.x		&0xff,SFPREGS(%a6)
-	fmovm.l		%fpcr,%fpsr,%fpiar,SFPCREGS(%a6)
-
-	mov.l		&0xffff0000,IFPREGS+0x0(%a6)
-	mov.l		&0x00000000,IFPREGS+0x4(%a6)
-	mov.l		&0x00000000,IFPREGS+0x8(%a6)
-	mov.l		&0x01002080,IFPCREGS+0x4(%a6)
-	lea		operr_0_pc(%pc),%a0
-	mov.l		%a0,IFPCREGS+0x8(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-	bsr.l		chkfpregs
-	tst.b		%d0
-	bne.l		error
-
-	clr.l		%d0
-	rts
-
-#####################################################################
-
-dz_str:
-	string		"\tEnabled DZ..."
-
-	align		0x4
-dz_0:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-	fmovm.x		DEF_FPREGS(%pc),&0xff
-	fmovm.l		DEF_FPCREGS(%pc),%fpcr,%fpsr,%fpiar
-
-	mov.w		&0x0000,ICCR(%a6)
-	movm.l		&0x7fff,IREGS(%a6)
-	fmovm.x		&0xff,IFPREGS(%a6)
-	fmov.l		&0x00000400,%fpcr		# enable DZ
-	fmovm.l		%fpcr,%fpsr,%fpiar,IFPCREGS(%a6)
-
-	mov.l		&0x40000000,DATA+0x0(%a6)
-	mov.l		&0x80000000,DATA+0x4(%a6)
-	mov.l		&0x00000000,DATA+0x8(%a6)
-	fmovm.x		DATA(%a6),&0x80
-
-	mov.w		&0x0000,%cc
-dz_0_pc:
-	fdiv.b		&0x0,%fp0
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0x7fff,SREGS(%a6)
-	fmovm.x		&0xff,SFPREGS(%a6)
-	fmovm.l		%fpcr,%fpsr,%fpiar,SFPCREGS(%a6)
-
-	mov.l		&0x40000000,IFPREGS+0x0(%a6)
-	mov.l		&0x80000000,IFPREGS+0x4(%a6)
-	mov.l		&0x00000000,IFPREGS+0x8(%a6)
-	mov.l		&0x02000410,IFPCREGS+0x4(%a6)
-	lea		dz_0_pc(%pc),%a0
-	mov.l		%a0,IFPCREGS+0x8(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-	bsr.l		chkfpregs
-	tst.b		%d0
-	bne.l		error
-
-	clr.l		%d0
-	rts
-
-#####################################################################
-
-unsupp_str:
-	string		"\tUnimplemented data type/format..."
-
-# an unnormalized number
-	align		0x4
-unsupp_0:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-	fmovm.x		DEF_FPREGS(%pc),&0xff
-	fmovm.l		DEF_FPCREGS(%pc),%fpcr,%fpsr,%fpiar
-
-	mov.w		&0x0000,ICCR(%a6)
-	movm.l		&0x7fff,IREGS(%a6)
-	fmovm.x		&0xff,IFPREGS(%a6)
-	fmovm.l		%fpcr,%fpsr,%fpiar,IFPCREGS(%a6)
-
-	mov.l		&0xc03f0000,DATA+0x0(%a6)
-	mov.l		&0x00000000,DATA+0x4(%a6)
-	mov.l		&0x00000001,DATA+0x8(%a6)
-	fmov.b		&0x2,%fp0
-	mov.w		&0x0000,%cc
-unsupp_0_pc:
-	fmul.x		DATA(%a6),%fp0
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0x7fff,SREGS(%a6)
-	fmovm.x		&0xff,SFPREGS(%a6)
-	fmovm.l		%fpcr,%fpsr,%fpiar,SFPCREGS(%a6)
-
-	mov.l		&0xc0010000,IFPREGS+0x0(%a6)
-	mov.l		&0x80000000,IFPREGS+0x4(%a6)
-	mov.l		&0x00000000,IFPREGS+0x8(%a6)
-	mov.l		&0x08000000,IFPCREGS+0x4(%a6)
-	lea		unsupp_0_pc(%pc),%a0
-	mov.l		%a0,IFPCREGS+0x8(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-	bsr.l		chkfpregs
-	tst.b		%d0
-	bne.l		error
-
-# a denormalized number
-unsupp_1:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-	fmovm.x		DEF_FPREGS(%pc),&0xff
-	fmovm.l		DEF_FPCREGS(%pc),%fpcr,%fpsr,%fpiar
-
-	mov.w		&0x0000,ICCR(%a6)
-	movm.l		&0x7fff,IREGS(%a6)
-	fmovm.x		&0xff,IFPREGS(%a6)
-	fmovm.l		%fpcr,%fpsr,%fpiar,IFPCREGS(%a6)
-
-	mov.l		&0x80000000,DATA+0x0(%a6)
-	mov.l		&0x01000000,DATA+0x4(%a6)
-	mov.l		&0x00000000,DATA+0x8(%a6)
-	fmov.l		&0x7fffffff,%fp0
-
-	mov.w		&0x0000,%cc
-unsupp_1_pc:
-	fmul.x		DATA(%a6),%fp0
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0x7fff,SREGS(%a6)
-	fmovm.x		&0xff,SFPREGS(%a6)
-	fmovm.l		%fpcr,%fpsr,%fpiar,SFPCREGS(%a6)
-
-	mov.l		&0x80170000,IFPREGS+0x0(%a6)
-	mov.l		&0xfffffffe,IFPREGS+0x4(%a6)
-	mov.l		&0x00000000,IFPREGS+0x8(%a6)
-	mov.l		&0x08000000,IFPCREGS+0x4(%a6)
-	lea		unsupp_1_pc(%pc),%a0
-	mov.l		%a0,IFPCREGS+0x8(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-	bsr.l		chkfpregs
-	tst.b		%d0
-	bne.l		error
-
-# packed
-unsupp_2:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-	fmovm.x		DEF_FPREGS(%pc),&0xff
-	fmovm.l		DEF_FPCREGS(%pc),%fpcr,%fpsr,%fpiar
-
-	mov.w		&0x0000,ICCR(%a6)
-	movm.l		&0x7fff,IREGS(%a6)
-	fmovm.x		&0xff,IFPREGS(%a6)
-	fmovm.l		%fpcr,%fpsr,%fpiar,IFPCREGS(%a6)
-
-	mov.l		&0xc1230001,DATA+0x0(%a6)
-	mov.l		&0x23456789,DATA+0x4(%a6)
-	mov.l		&0x12345678,DATA+0x8(%a6)
-
-	mov.w		&0x0000,%cc
-unsupp_2_pc:
-	fabs.p		DATA(%a6),%fp0
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0x7fff,SREGS(%a6)
-	fmovm.x		&0xff,SFPREGS(%a6)
-	fmovm.l		%fpcr,%fpsr,%fpiar,SFPCREGS(%a6)
-
-	mov.l		&0x3e660000,IFPREGS+0x0(%a6)
-	mov.l		&0xd0ed23e8,IFPREGS+0x4(%a6)
-	mov.l		&0xd14035bc,IFPREGS+0x8(%a6)
-	mov.l		&0x00000108,IFPCREGS+0x4(%a6)
-	lea		unsupp_2_pc(%pc),%a0
-	mov.l		%a0,IFPCREGS+0x8(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-	bsr.l		chkfpregs
-	tst.b		%d0
-	bne.l		error
-
-	clr.l		%d0
-	rts
-
-###########################################################
-###########################################################
-
-chkregs:
-	lea		IREGS(%a6),%a0
-	lea		SREGS(%a6),%a1
-	mov.l		&14,%d0
-chkregs_loop:
-	cmp.l		(%a0)+,(%a1)+
-	bne.l		chkregs_error
-	dbra.w		%d0,chkregs_loop
-
-	mov.w		ICCR(%a6),%d0
-	mov.w		SCCR(%a6),%d1
-	cmp.w		%d0,%d1
-	bne.l		chkregs_error
-
-	clr.l		%d0
-	rts
-
-chkregs_error:
-	movq.l		&0x1,%d0
-	rts
-
-error:
-	mov.l		TESTCTR(%a6),%d1
-	movq.l		&0x1,%d0
-	rts
-
-chkfpregs:
-	lea		IFPREGS(%a6),%a0
-	lea		SFPREGS(%a6),%a1
-	mov.l		&23,%d0
-chkfpregs_loop:
-	cmp.l		(%a0)+,(%a1)+
-	bne.l		chkfpregs_error
-	dbra.w		%d0,chkfpregs_loop
-
-	lea		IFPCREGS(%a6),%a0
-	lea		SFPCREGS(%a6),%a1
-	cmp.l		(%a0)+,(%a1)+
-	bne.l		chkfpregs_error
-	cmp.l		(%a0)+,(%a1)+
-	bne.l		chkfpregs_error
-	cmp.l		(%a0)+,(%a1)+
-	bne.l		chkfpregs_error
-
-	clr.l		%d0
-	rts
-
-chkfpregs_error:
-	movq.l		&0x1,%d0
-	rts
-
-DEF_REGS:
-	long		0xacacacac, 0xacacacac, 0xacacacac, 0xacacacac
-	long		0xacacacac, 0xacacacac, 0xacacacac, 0xacacacac
-
-	long		0xacacacac, 0xacacacac, 0xacacacac, 0xacacacac
-	long		0xacacacac, 0xacacacac, 0xacacacac, 0xacacacac
-
-DEF_FPREGS:
-	long		0x7fff0000, 0xffffffff, 0xffffffff
-	long		0x7fff0000, 0xffffffff, 0xffffffff
-	long		0x7fff0000, 0xffffffff, 0xffffffff
-	long		0x7fff0000, 0xffffffff, 0xffffffff
-	long		0x7fff0000, 0xffffffff, 0xffffffff
-	long		0x7fff0000, 0xffffffff, 0xffffffff
-	long		0x7fff0000, 0xffffffff, 0xffffffff
-	long		0x7fff0000, 0xffffffff, 0xffffffff
-
-DEF_FPCREGS:
-	long		0x00000000, 0x00000000, 0x00000000
-
-############################################################
-
-_print_str:
-	mov.l		%d0,-(%sp)
-	mov.l		(TESTTOP-0x80+0x0,%pc),%d0
-	pea		(TESTTOP-0x80,%pc,%d0)
-	mov.l		0x4(%sp),%d0
-	rtd		&0x4
-
-_print_num:
-	mov.l		%d0,-(%sp)
-	mov.l		(TESTTOP-0x80+0x4,%pc),%d0
-	pea		(TESTTOP-0x80,%pc,%d0)
-	mov.l		0x4(%sp),%d0
-	rtd		&0x4
-
-############################################################
diff --git a/ANDROID_3.4.5/arch/m68k/ifpsp060/src/ilsp.S b/ANDROID_3.4.5/arch/m68k/ifpsp060/src/ilsp.S
deleted file mode 100644
index 970abaf3..00000000
--- a/ANDROID_3.4.5/arch/m68k/ifpsp060/src/ilsp.S
+++ /dev/null
@@ -1,932 +0,0 @@
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-MOTOROLA MICROPROCESSOR & MEMORY TECHNOLOGY GROUP
-M68000 Hi-Performance Microprocessor Division
-M68060 Software Package
-Production Release P1.00 -- October 10, 1994
-
-M68060 Software Package Copyright © 1993, 1994 Motorola Inc.  All rights reserved.
-
-THE SOFTWARE is provided on an "AS IS" basis and without warranty.
-To the maximum extent permitted by applicable law,
-MOTOROLA DISCLAIMS ALL WARRANTIES WHETHER EXPRESS OR IMPLIED,
-INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
-and any warranty against infringement with regard to the SOFTWARE
-(INCLUDING ANY MODIFIED VERSIONS THEREOF) and any accompanying written materials.
-
-To the maximum extent permitted by applicable law,
-IN NO EVENT SHALL MOTOROLA BE LIABLE FOR ANY DAMAGES WHATSOEVER
-(INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS,
-BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, OR OTHER PECUNIARY LOSS)
-ARISING OF THE USE OR INABILITY TO USE THE SOFTWARE.
-Motorola assumes no responsibility for the maintenance and support of the SOFTWARE.
-
-You are hereby granted a copyright license to use, modify, and distribute the SOFTWARE
-so long as this entire notice is retained without alteration in any modified and/or
-redistributed versions, and that such modified versions are clearly identified as such.
-No licenses are granted by implication, estoppel or otherwise under any patents
-or trademarks of Motorola, Inc.
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-# litop.s:
-#	This file is appended to the top of the 060FPLSP package
-# and contains the entry points into the package. The user, in
-# effect, branches to one of the branch table entries located here.
-#
-
-	bra.l	_060LSP__idivs64_
-	short	0x0000
-	bra.l	_060LSP__idivu64_
-	short	0x0000
-
-	bra.l	_060LSP__imuls64_
-	short	0x0000
-	bra.l	_060LSP__imulu64_
-	short	0x0000
-
-	bra.l	_060LSP__cmp2_Ab_
-	short	0x0000
-	bra.l	_060LSP__cmp2_Aw_
-	short	0x0000
-	bra.l	_060LSP__cmp2_Al_
-	short	0x0000
-	bra.l	_060LSP__cmp2_Db_
-	short	0x0000
-	bra.l	_060LSP__cmp2_Dw_
-	short	0x0000
-	bra.l	_060LSP__cmp2_Dl_
-	short	0x0000
-
-# leave room for future possible aditions.
-	align	0x200
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	_060LSP__idivu64_(): Emulate 64-bit unsigned div instruction.	#
-#	_060LSP__idivs64_(): Emulate 64-bit signed div instruction.	#
-#									#
-#	This is the library version which is accessed as a subroutine	#
-#	and therefore does not work exactly like the 680X0 div{s,u}.l	#
-#	64-bit divide instruction.					#
-#									#
-# XREF ****************************************************************	#
-#	None.								#
-#									#
-# INPUT ***************************************************************	#
-#	0x4(sp)  = divisor						#
-#	0x8(sp)  = hi(dividend)						#
-#	0xc(sp)  = lo(dividend)						#
-#	0x10(sp) = pointer to location to place quotient/remainder	#
-#									#
-# OUTPUT **************************************************************	#
-#	0x10(sp) = points to location of remainder/quotient.		#
-#		   remainder is in first longword, quotient is in 2nd.	#
-#									#
-# ALGORITHM ***********************************************************	#
-#	If the operands are signed, make them unsigned and save the	#
-# sign info for later. Separate out special cases like divide-by-zero	#
-# or 32-bit divides if possible. Else, use a special math algorithm	#
-# to calculate the result.						#
-#	Restore sign info if signed instruction. Set the condition	#
-# codes before performing the final "rts". If the divisor was equal to	#
-# zero, then perform a divide-by-zero using a 16-bit implemented	#
-# divide instruction. This way, the operating system can record that	#
-# the event occurred even though it may not point to the correct place.	#
-#									#
-#########################################################################
-
-set	POSNEG,		-1
-set	NDIVISOR,	-2
-set	NDIVIDEND,	-3
-set	DDSECOND,	-4
-set	DDNORMAL,	-8
-set	DDQUOTIENT,	-12
-set	DIV64_CC,	-16
-
-##########
-# divs.l #
-##########
-	global		_060LSP__idivs64_
-_060LSP__idivs64_:
-# PROLOGUE BEGIN ########################################################
-	link.w		%a6,&-16
-	movm.l		&0x3f00,-(%sp)		# save d2-d7
-#	fmovm.l		&0x0,-(%sp)		# save no fpregs
-# PROLOGUE END ##########################################################
-
-	mov.w		%cc,DIV64_CC(%a6)
-	st		POSNEG(%a6)		# signed operation
-	bra.b		ldiv64_cont
-
-##########
-# divu.l #
-##########
-	global		_060LSP__idivu64_
-_060LSP__idivu64_:
-# PROLOGUE BEGIN ########################################################
-	link.w		%a6,&-16
-	movm.l		&0x3f00,-(%sp)		# save d2-d7
-#	fmovm.l		&0x0,-(%sp)		# save no fpregs
-# PROLOGUE END ##########################################################
-
-	mov.w		%cc,DIV64_CC(%a6)
-	sf		POSNEG(%a6)		# unsigned operation
-
-ldiv64_cont:
-	mov.l		0x8(%a6),%d7		# fetch divisor
-
-	beq.w		ldiv64eq0		# divisor is = 0!!!
-
-	mov.l		0xc(%a6), %d5		# get dividend hi
-	mov.l		0x10(%a6), %d6		# get dividend lo
-
-# separate signed and unsigned divide
-	tst.b		POSNEG(%a6)		# signed or unsigned?
-	beq.b		ldspecialcases		# use positive divide
-
-# save the sign of the divisor
-# make divisor unsigned if it's negative
-	tst.l		%d7			# chk sign of divisor
-	slt		NDIVISOR(%a6)		# save sign of divisor
-	bpl.b		ldsgndividend
-	neg.l		%d7			# complement negative divisor
-
-# save the sign of the dividend
-# make dividend unsigned if it's negative
-ldsgndividend:
-	tst.l		%d5			# chk sign of hi(dividend)
-	slt		NDIVIDEND(%a6)		# save sign of dividend
-	bpl.b		ldspecialcases
-
-	mov.w		&0x0, %cc		# clear 'X' cc bit
-	negx.l		%d6			# complement signed dividend
-	negx.l		%d5
-
-# extract some special cases:
-#	- is (dividend == 0) ?
-#	- is (hi(dividend) == 0 && (divisor <= lo(dividend))) ? (32-bit div)
-ldspecialcases:
-	tst.l		%d5			# is (hi(dividend) == 0)
-	bne.b		ldnormaldivide		# no, so try it the long way
-
-	tst.l		%d6			# is (lo(dividend) == 0), too
-	beq.w		lddone			# yes, so (dividend == 0)
-
-	cmp.l		%d7,%d6			# is (divisor <= lo(dividend))
-	bls.b		ld32bitdivide		# yes, so use 32 bit divide
-
-	exg		%d5,%d6			# q = 0, r = dividend
-	bra.w		ldivfinish		# can't divide, we're done.
-
-ld32bitdivide:
-	tdivu.l		%d7, %d5:%d6		# it's only a 32/32 bit div!
-
-	bra.b		ldivfinish
-
-ldnormaldivide:
-# last special case:
-#	- is hi(dividend) >= divisor ? if yes, then overflow
-	cmp.l		%d7,%d5
-	bls.b		lddovf			# answer won't fit in 32 bits
-
-# perform the divide algorithm:
-	bsr.l		ldclassical		# do int divide
-
-# separate into signed and unsigned finishes.
-ldivfinish:
-	tst.b		POSNEG(%a6)		# do divs, divu separately
-	beq.b		lddone			# divu has no processing!!!
-
-# it was a divs.l, so ccode setting is a little more complicated...
-	tst.b		NDIVIDEND(%a6)		# remainder has same sign
-	beq.b		ldcc			# as dividend.
-	neg.l		%d5			# sgn(rem) = sgn(dividend)
-ldcc:
-	mov.b		NDIVISOR(%a6), %d0
-	eor.b		%d0, NDIVIDEND(%a6)	# chk if quotient is negative
-	beq.b		ldqpos			# branch to quot positive
-
-# 0x80000000 is the largest number representable as a 32-bit negative
-# number. the negative of 0x80000000 is 0x80000000.
-	cmpi.l		%d6, &0x80000000	# will (-quot) fit in 32 bits?
-	bhi.b		lddovf
-
-	neg.l		%d6			# make (-quot) 2's comp
-
-	bra.b		lddone
-
-ldqpos:
-	btst		&0x1f, %d6		# will (+quot) fit in 32 bits?
-	bne.b		lddovf
-
-lddone:
-# if the register numbers are the same, only the quotient gets saved.
-# so, if we always save the quotient second, we save ourselves a cmp&beq
-	andi.w		&0x10,DIV64_CC(%a6)
-	mov.w		DIV64_CC(%a6),%cc
-	tst.l		%d6			# may set 'N' ccode bit
-
-# here, the result is in d1 and d0. the current strategy is to save
-# the values at the location pointed to by a0.
-# use movm here to not disturb the condition codes.
-ldexit:
-	movm.l		&0x0060,([0x14,%a6])	# save result
-
-# EPILOGUE BEGIN ########################################################
-#	fmovm.l		(%sp)+,&0x0		# restore no fpregs
-	movm.l		(%sp)+,&0x00fc		# restore d2-d7
-	unlk		%a6
-# EPILOGUE END ##########################################################
-
-	rts
-
-# the result should be the unchanged dividend
-lddovf:
-	mov.l		0xc(%a6), %d5		# get dividend hi
-	mov.l		0x10(%a6), %d6		# get dividend lo
-
-	andi.w		&0x1c,DIV64_CC(%a6)
-	ori.w		&0x02,DIV64_CC(%a6)	# set 'V' ccode bit
-	mov.w		DIV64_CC(%a6),%cc
-
-	bra.b		ldexit
-
-ldiv64eq0:
-	mov.l		0xc(%a6),([0x14,%a6])
-	mov.l		0x10(%a6),([0x14,%a6],0x4)
-
-	mov.w		DIV64_CC(%a6),%cc
-
-# EPILOGUE BEGIN ########################################################
-#	fmovm.l		(%sp)+,&0x0		# restore no fpregs
-	movm.l		(%sp)+,&0x00fc		# restore d2-d7
-	unlk		%a6
-# EPILOGUE END ##########################################################
-
-	divu.w		&0x0,%d0		# force a divbyzero exception
-	rts
-
-###########################################################################
-#########################################################################
-# This routine uses the 'classical' Algorithm D from Donald Knuth's	#
-# Art of Computer Programming, vol II, Seminumerical Algorithms.	#
-# For this implementation b=2**16, and the target is U1U2U3U4/V1V2,	#
-# where U,V are words of the quadword dividend and longword divisor,	#
-# and U1, V1 are the most significant words.				#
-#									#
-# The most sig. longword of the 64 bit dividend must be in %d5, least	#
-# in %d6. The divisor must be in the variable ddivisor, and the		#
-# signed/unsigned flag ddusign must be set (0=unsigned,1=signed).	#
-# The quotient is returned in %d6, remainder in %d5, unless the		#
-# v (overflow) bit is set in the saved %ccr. If overflow, the dividend	#
-# is unchanged.								#
-#########################################################################
-ldclassical:
-# if the divisor msw is 0, use simpler algorithm then the full blown
-# one at ddknuth:
-
-	cmpi.l		%d7, &0xffff
-	bhi.b		lddknuth		# go use D. Knuth algorithm
-
-# Since the divisor is only a word (and larger than the mslw of the dividend),
-# a simpler algorithm may be used :
-# In the general case, four quotient words would be created by
-# dividing the divisor word into each dividend word. In this case,
-# the first two quotient words must be zero, or overflow would occur.
-# Since we already checked this case above, we can treat the most significant
-# longword of the dividend as (0) remainder (see Knuth) and merely complete
-# the last two divisions to get a quotient longword and word remainder:
-
-	clr.l		%d1
-	swap		%d5			# same as r*b if previous step rqd
-	swap		%d6			# get u3 to lsw position
-	mov.w		%d6, %d5		# rb + u3
-
-	divu.w		%d7, %d5
-
-	mov.w		%d5, %d1		# first quotient word
-	swap		%d6			# get u4
-	mov.w		%d6, %d5		# rb + u4
-
-	divu.w		%d7, %d5
-
-	swap		%d1
-	mov.w		%d5, %d1		# 2nd quotient 'digit'
-	clr.w		%d5
-	swap		%d5			# now remainder
-	mov.l		%d1, %d6		# and quotient
-
-	rts
-
-lddknuth:
-# In this algorithm, the divisor is treated as a 2 digit (word) number
-# which is divided into a 3 digit (word) dividend to get one quotient
-# digit (word). After subtraction, the dividend is shifted and the
-# process repeated. Before beginning, the divisor and quotient are
-# 'normalized' so that the process of estimating the quotient digit
-# will yield verifiably correct results..
-
-	clr.l		DDNORMAL(%a6)		# count of shifts for normalization
-	clr.b		DDSECOND(%a6)		# clear flag for quotient digits
-	clr.l		%d1			# %d1 will hold trial quotient
-lddnchk:
-	btst		&31, %d7		# must we normalize? first word of
-	bne.b		lddnormalized		# divisor (V1) must be >= 65536/2
-	addq.l		&0x1, DDNORMAL(%a6)	# count normalization shifts
-	lsl.l		&0x1, %d7		# shift the divisor
-	lsl.l		&0x1, %d6		# shift u4,u3 with overflow to u2
-	roxl.l		&0x1, %d5		# shift u1,u2
-	bra.w		lddnchk
-lddnormalized:
-
-# Now calculate an estimate of the quotient words (msw first, then lsw).
-# The comments use subscripts for the first quotient digit determination.
-	mov.l		%d7, %d3		# divisor
-	mov.l		%d5, %d2		# dividend mslw
-	swap		%d2
-	swap		%d3
-	cmp.w		%d2, %d3		# V1 = U1 ?
-	bne.b		lddqcalc1
-	mov.w		&0xffff, %d1		# use max trial quotient word
-	bra.b		lddadj0
-lddqcalc1:
-	mov.l		%d5, %d1
-
-	divu.w		%d3, %d1		# use quotient of mslw/msw
-
-	andi.l		&0x0000ffff, %d1	# zero any remainder
-lddadj0:
-
-# now test the trial quotient and adjust. This step plus the
-# normalization assures (according to Knuth) that the trial
-# quotient will be at worst 1 too large.
-	mov.l		%d6, -(%sp)
-	clr.w		%d6			# word u3 left
-	swap		%d6			# in lsw position
-lddadj1: mov.l		%d7, %d3
-	mov.l		%d1, %d2
-	mulu.w		%d7, %d2		# V2q
-	swap		%d3
-	mulu.w		%d1, %d3		# V1q
-	mov.l		%d5, %d4		# U1U2
-	sub.l		%d3, %d4		# U1U2 - V1q
-
-	swap		%d4
-
-	mov.w		%d4,%d0
-	mov.w		%d6,%d4			# insert lower word (U3)
-
-	tst.w		%d0			# is upper word set?
-	bne.w		lddadjd1
-
-#	add.l		%d6, %d4		# (U1U2 - V1q) + U3
-
-	cmp.l		%d2, %d4
-	bls.b		lddadjd1		# is V2q > (U1U2-V1q) + U3 ?
-	subq.l		&0x1, %d1		# yes, decrement and recheck
-	bra.b		lddadj1
-lddadjd1:
-# now test the word by multiplying it by the divisor (V1V2) and comparing
-# the 3 digit (word) result with the current dividend words
-	mov.l		%d5, -(%sp)		# save %d5 (%d6 already saved)
-	mov.l		%d1, %d6
-	swap		%d6			# shift answer to ms 3 words
-	mov.l		%d7, %d5
-	bsr.l		ldmm2
-	mov.l		%d5, %d2		# now %d2,%d3 are trial*divisor
-	mov.l		%d6, %d3
-	mov.l		(%sp)+, %d5		# restore dividend
-	mov.l		(%sp)+, %d6
-	sub.l		%d3, %d6
-	subx.l		%d2, %d5		# subtract double precision
-	bcc		ldd2nd			# no carry, do next quotient digit
-	subq.l		&0x1, %d1		# q is one too large
-# need to add back divisor longword to current ms 3 digits of dividend
-# - according to Knuth, this is done only 2 out of 65536 times for random
-# divisor, dividend selection.
-	clr.l		%d2
-	mov.l		%d7, %d3
-	swap		%d3
-	clr.w		%d3			# %d3 now ls word of divisor
-	add.l		%d3, %d6		# aligned with 3rd word of dividend
-	addx.l		%d2, %d5
-	mov.l		%d7, %d3
-	clr.w		%d3			# %d3 now ms word of divisor
-	swap		%d3			# aligned with 2nd word of dividend
-	add.l		%d3, %d5
-ldd2nd:
-	tst.b		DDSECOND(%a6)	# both q words done?
-	bne.b		lddremain
-# first quotient digit now correct. store digit and shift the
-# (subtracted) dividend
-	mov.w		%d1, DDQUOTIENT(%a6)
-	clr.l		%d1
-	swap		%d5
-	swap		%d6
-	mov.w		%d6, %d5
-	clr.w		%d6
-	st		DDSECOND(%a6)		# second digit
-	bra.w		lddnormalized
-lddremain:
-# add 2nd word to quotient, get the remainder.
-	mov.w		%d1, DDQUOTIENT+2(%a6)
-# shift down one word/digit to renormalize remainder.
-	mov.w		%d5, %d6
-	swap		%d6
-	swap		%d5
-	mov.l		DDNORMAL(%a6), %d7	# get norm shift count
-	beq.b		lddrn
-	subq.l		&0x1, %d7		# set for loop count
-lddnlp:
-	lsr.l		&0x1, %d5		# shift into %d6
-	roxr.l		&0x1, %d6
-	dbf		%d7, lddnlp
-lddrn:
-	mov.l		%d6, %d5		# remainder
-	mov.l		DDQUOTIENT(%a6), %d6	# quotient
-
-	rts
-ldmm2:
-# factors for the 32X32->64 multiplication are in %d5 and %d6.
-# returns 64 bit result in %d5 (hi) %d6(lo).
-# destroys %d2,%d3,%d4.
-
-# multiply hi,lo words of each factor to get 4 intermediate products
-	mov.l		%d6, %d2
-	mov.l		%d6, %d3
-	mov.l		%d5, %d4
-	swap		%d3
-	swap		%d4
-	mulu.w		%d5, %d6		# %d6 <- lsw*lsw
-	mulu.w		%d3, %d5		# %d5 <- msw-dest*lsw-source
-	mulu.w		%d4, %d2		# %d2 <- msw-source*lsw-dest
-	mulu.w		%d4, %d3		# %d3 <- msw*msw
-# now use swap and addx to consolidate to two longwords
-	clr.l		%d4
-	swap		%d6
-	add.w		%d5, %d6		# add msw of l*l to lsw of m*l product
-	addx.w		%d4, %d3		# add any carry to m*m product
-	add.w		%d2, %d6		# add in lsw of other m*l product
-	addx.w		%d4, %d3		# add any carry to m*m product
-	swap		%d6			# %d6 is low 32 bits of final product
-	clr.w		%d5
-	clr.w		%d2			# lsw of two mixed products used,
-	swap		%d5			# now use msws of longwords
-	swap		%d2
-	add.l		%d2, %d5
-	add.l		%d3, %d5	# %d5 now ms 32 bits of final product
-	rts
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	_060LSP__imulu64_(): Emulate 64-bit unsigned mul instruction	#
-#	_060LSP__imuls64_(): Emulate 64-bit signed mul instruction.	#
-#									#
-#	This is the library version which is accessed as a subroutine	#
-#	and therefore does not work exactly like the 680X0 mul{s,u}.l	#
-#	64-bit multiply instruction.					#
-#									#
-# XREF ****************************************************************	#
-#	None								#
-#									#
-# INPUT ***************************************************************	#
-#	0x4(sp) = multiplier						#
-#	0x8(sp) = multiplicand						#
-#	0xc(sp) = pointer to location to place 64-bit result		#
-#									#
-# OUTPUT **************************************************************	#
-#	0xc(sp) = points to location of 64-bit result			#
-#									#
-# ALGORITHM ***********************************************************	#
-#	Perform the multiply in pieces using 16x16->32 unsigned		#
-# multiplies and "add" instructions.					#
-#	Set the condition codes as appropriate before performing an	#
-# "rts".								#
-#									#
-#########################################################################
-
-set MUL64_CC, -4
-
-	global		_060LSP__imulu64_
-_060LSP__imulu64_:
-
-# PROLOGUE BEGIN ########################################################
-	link.w		%a6,&-4
-	movm.l		&0x3800,-(%sp)		# save d2-d4
-#	fmovm.l		&0x0,-(%sp)		# save no fpregs
-# PROLOGUE END ##########################################################
-
-	mov.w		%cc,MUL64_CC(%a6)	# save incoming ccodes
-
-	mov.l		0x8(%a6),%d0		# store multiplier in d0
-	beq.w		mulu64_zero		# handle zero separately
-
-	mov.l		0xc(%a6),%d1		# get multiplicand in d1
-	beq.w		mulu64_zero		# handle zero separately
-
-#########################################################################
-#	63			   32				0	#
-#	----------------------------					#
-#	| hi(mplier) * hi(mplicand)|					#
-#	----------------------------					#
-#		     -----------------------------			#
-#		     | hi(mplier) * lo(mplicand) |			#
-#		     -----------------------------			#
-#		     -----------------------------			#
-#		     | lo(mplier) * hi(mplicand) |			#
-#		     -----------------------------			#
-#	  |			   -----------------------------	#
-#	--|--			   | lo(mplier) * lo(mplicand) |	#
-#	  |			   -----------------------------	#
-#	========================================================	#
-#	--------------------------------------------------------	#
-#	|	hi(result)	   |	    lo(result)         |	#
-#	--------------------------------------------------------	#
-#########################################################################
-mulu64_alg:
-# load temp registers with operands
-	mov.l		%d0,%d2			# mr in d2
-	mov.l		%d0,%d3			# mr in d3
-	mov.l		%d1,%d4			# md in d4
-	swap		%d3			# hi(mr) in lo d3
-	swap		%d4			# hi(md) in lo d4
-
-# complete necessary multiplies:
-	mulu.w		%d1,%d0			# [1] lo(mr) * lo(md)
-	mulu.w		%d3,%d1			# [2] hi(mr) * lo(md)
-	mulu.w		%d4,%d2			# [3] lo(mr) * hi(md)
-	mulu.w		%d4,%d3			# [4] hi(mr) * hi(md)
-
-# add lo portions of [2],[3] to hi portion of [1].
-# add carries produced from these adds to [4].
-# lo([1]) is the final lo 16 bits of the result.
-	clr.l		%d4			# load d4 w/ zero value
-	swap		%d0			# hi([1]) <==> lo([1])
-	add.w		%d1,%d0			# hi([1]) + lo([2])
-	addx.l		%d4,%d3			#    [4]  + carry
-	add.w		%d2,%d0			# hi([1]) + lo([3])
-	addx.l		%d4,%d3			#    [4]  + carry
-	swap		%d0			# lo([1]) <==> hi([1])
-
-# lo portions of [2],[3] have been added in to final result.
-# now, clear lo, put hi in lo reg, and add to [4]
-	clr.w		%d1			# clear lo([2])
-	clr.w		%d2			# clear hi([3])
-	swap		%d1			# hi([2]) in lo d1
-	swap		%d2			# hi([3]) in lo d2
-	add.l		%d2,%d1			#    [4]  + hi([2])
-	add.l		%d3,%d1			#    [4]  + hi([3])
-
-# now, grab the condition codes. only one that can be set is 'N'.
-# 'N' CAN be set if the operation is unsigned if bit 63 is set.
-	mov.w		MUL64_CC(%a6),%d4
-	andi.b		&0x10,%d4		# keep old 'X' bit
-	tst.l		%d1			# may set 'N' bit
-	bpl.b		mulu64_ddone
-	ori.b		&0x8,%d4		# set 'N' bit
-mulu64_ddone:
-	mov.w		%d4,%cc
-
-# here, the result is in d1 and d0. the current strategy is to save
-# the values at the location pointed to by a0.
-# use movm here to not disturb the condition codes.
-mulu64_end:
-	exg		%d1,%d0
-	movm.l		&0x0003,([0x10,%a6])		# save result
-
-# EPILOGUE BEGIN ########################################################
-#	fmovm.l		(%sp)+,&0x0		# restore no fpregs
-	movm.l		(%sp)+,&0x001c		# restore d2-d4
-	unlk		%a6
-# EPILOGUE END ##########################################################
-
-	rts
-
-# one or both of the operands is zero so the result is also zero.
-# save the zero result to the register file and set the 'Z' ccode bit.
-mulu64_zero:
-	clr.l		%d0
-	clr.l		%d1
-
-	mov.w		MUL64_CC(%a6),%d4
-	andi.b		&0x10,%d4
-	ori.b		&0x4,%d4
-	mov.w		%d4,%cc			# set 'Z' ccode bit
-
-	bra.b		mulu64_end
-
-##########
-# muls.l #
-##########
-	global		_060LSP__imuls64_
-_060LSP__imuls64_:
-
-# PROLOGUE BEGIN ########################################################
-	link.w		%a6,&-4
-	movm.l		&0x3c00,-(%sp)		# save d2-d5
-#	fmovm.l		&0x0,-(%sp)		# save no fpregs
-# PROLOGUE END ##########################################################
-
-	mov.w		%cc,MUL64_CC(%a6)	# save incoming ccodes
-
-	mov.l		0x8(%a6),%d0		# store multiplier in d0
-	beq.b		mulu64_zero		# handle zero separately
-
-	mov.l		0xc(%a6),%d1		# get multiplicand in d1
-	beq.b		mulu64_zero		# handle zero separately
-
-	clr.b		%d5			# clear sign tag
-	tst.l		%d0			# is multiplier negative?
-	bge.b		muls64_chk_md_sgn	# no
-	neg.l		%d0			# make multiplier positive
-
-	ori.b		&0x1,%d5		# save multiplier sgn
-
-# the result sign is the exclusive or of the operand sign bits.
-muls64_chk_md_sgn:
-	tst.l		%d1			# is multiplicand negative?
-	bge.b		muls64_alg		# no
-	neg.l		%d1			# make multiplicand positive
-
-	eori.b		&0x1,%d5		# calculate correct sign
-
-#########################################################################
-#	63			   32				0	#
-#	----------------------------					#
-#	| hi(mplier) * hi(mplicand)|					#
-#	----------------------------					#
-#		     -----------------------------			#
-#		     | hi(mplier) * lo(mplicand) |			#
-#		     -----------------------------			#
-#		     -----------------------------			#
-#		     | lo(mplier) * hi(mplicand) |			#
-#		     -----------------------------			#
-#	  |			   -----------------------------	#
-#	--|--			   | lo(mplier) * lo(mplicand) |	#
-#	  |			   -----------------------------	#
-#	========================================================	#
-#	--------------------------------------------------------	#
-#	|	hi(result)	   |	    lo(result)         |	#
-#	--------------------------------------------------------	#
-#########################################################################
-muls64_alg:
-# load temp registers with operands
-	mov.l		%d0,%d2			# mr in d2
-	mov.l		%d0,%d3			# mr in d3
-	mov.l		%d1,%d4			# md in d4
-	swap		%d3			# hi(mr) in lo d3
-	swap		%d4			# hi(md) in lo d4
-
-# complete necessary multiplies:
-	mulu.w		%d1,%d0			# [1] lo(mr) * lo(md)
-	mulu.w		%d3,%d1			# [2] hi(mr) * lo(md)
-	mulu.w		%d4,%d2			# [3] lo(mr) * hi(md)
-	mulu.w		%d4,%d3			# [4] hi(mr) * hi(md)
-
-# add lo portions of [2],[3] to hi portion of [1].
-# add carries produced from these adds to [4].
-# lo([1]) is the final lo 16 bits of the result.
-	clr.l		%d4			# load d4 w/ zero value
-	swap		%d0			# hi([1]) <==> lo([1])
-	add.w		%d1,%d0			# hi([1]) + lo([2])
-	addx.l		%d4,%d3			#    [4]  + carry
-	add.w		%d2,%d0			# hi([1]) + lo([3])
-	addx.l		%d4,%d3			#    [4]  + carry
-	swap		%d0			# lo([1]) <==> hi([1])
-
-# lo portions of [2],[3] have been added in to final result.
-# now, clear lo, put hi in lo reg, and add to [4]
-	clr.w		%d1			# clear lo([2])
-	clr.w		%d2			# clear hi([3])
-	swap		%d1			# hi([2]) in lo d1
-	swap		%d2			# hi([3]) in lo d2
-	add.l		%d2,%d1			#    [4]  + hi([2])
-	add.l		%d3,%d1			#    [4]  + hi([3])
-
-	tst.b		%d5			# should result be signed?
-	beq.b		muls64_done		# no
-
-# result should be a signed negative number.
-# compute 2's complement of the unsigned number:
-#   -negate all bits and add 1
-muls64_neg:
-	not.l		%d0			# negate lo(result) bits
-	not.l		%d1			# negate hi(result) bits
-	addq.l		&1,%d0			# add 1 to lo(result)
-	addx.l		%d4,%d1			# add carry to hi(result)
-
-muls64_done:
-	mov.w		MUL64_CC(%a6),%d4
-	andi.b		&0x10,%d4		# keep old 'X' bit
-	tst.l		%d1			# may set 'N' bit
-	bpl.b		muls64_ddone
-	ori.b		&0x8,%d4		# set 'N' bit
-muls64_ddone:
-	mov.w		%d4,%cc
-
-# here, the result is in d1 and d0. the current strategy is to save
-# the values at the location pointed to by a0.
-# use movm here to not disturb the condition codes.
-muls64_end:
-	exg		%d1,%d0
-	movm.l		&0x0003,([0x10,%a6])	# save result at (a0)
-
-# EPILOGUE BEGIN ########################################################
-#	fmovm.l		(%sp)+,&0x0		# restore no fpregs
-	movm.l		(%sp)+,&0x003c		# restore d2-d5
-	unlk		%a6
-# EPILOGUE END ##########################################################
-
-	rts
-
-# one or both of the operands is zero so the result is also zero.
-# save the zero result to the register file and set the 'Z' ccode bit.
-muls64_zero:
-	clr.l		%d0
-	clr.l		%d1
-
-	mov.w		MUL64_CC(%a6),%d4
-	andi.b		&0x10,%d4
-	ori.b		&0x4,%d4
-	mov.w		%d4,%cc			# set 'Z' ccode bit
-
-	bra.b		muls64_end
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	_060LSP__cmp2_Ab_(): Emulate "cmp2.b An,<ea>".			#
-#	_060LSP__cmp2_Aw_(): Emulate "cmp2.w An,<ea>".			#
-#	_060LSP__cmp2_Al_(): Emulate "cmp2.l An,<ea>".			#
-#	_060LSP__cmp2_Db_(): Emulate "cmp2.b Dn,<ea>".			#
-#	_060LSP__cmp2_Dw_(): Emulate "cmp2.w Dn,<ea>".			#
-#	_060LSP__cmp2_Dl_(): Emulate "cmp2.l Dn,<ea>".			#
-#									#
-#	This is the library version which is accessed as a subroutine	#
-#	and therefore does not work exactly like the 680X0 "cmp2"	#
-#	instruction.							#
-#									#
-# XREF ****************************************************************	#
-#	None								#
-#									#
-# INPUT ***************************************************************	#
-#	0x4(sp) = Rn							#
-#	0x8(sp) = pointer to boundary pair				#
-#									#
-# OUTPUT **************************************************************	#
-#	cc = condition codes are set correctly				#
-#									#
-# ALGORITHM ***********************************************************	#
-#	In the interest of simplicity, all operands are converted to	#
-# longword size whether the operation is byte, word, or long. The	#
-# bounds are sign extended accordingly. If Rn is a data regsiter, Rn is #
-# also sign extended. If Rn is an address register, it need not be sign #
-# extended since the full register is always used.			#
-#	The condition codes are set correctly before the final "rts".	#
-#									#
-#########################################################################
-
-set	CMP2_CC,	-4
-
-	global		_060LSP__cmp2_Ab_
-_060LSP__cmp2_Ab_:
-
-# PROLOGUE BEGIN ########################################################
-	link.w		%a6,&-4
-	movm.l		&0x3800,-(%sp)		# save d2-d4
-#	fmovm.l		&0x0,-(%sp)		# save no fpregs
-# PROLOGUE END ##########################################################
-
-	mov.w		%cc,CMP2_CC(%a6)
-	mov.l		0x8(%a6), %d2		# get regval
-
-	mov.b		([0xc,%a6],0x0),%d0
-	mov.b		([0xc,%a6],0x1),%d1
-
-	extb.l		%d0			# sign extend lo bnd
-	extb.l		%d1			# sign extend hi bnd
-	bra.w		l_cmp2_cmp		# go do the compare emulation
-
-	global		_060LSP__cmp2_Aw_
-_060LSP__cmp2_Aw_:
-
-# PROLOGUE BEGIN ########################################################
-	link.w		%a6,&-4
-	movm.l		&0x3800,-(%sp)		# save d2-d4
-#	fmovm.l		&0x0,-(%sp)		# save no fpregs
-# PROLOGUE END ##########################################################
-
-	mov.w		%cc,CMP2_CC(%a6)
-	mov.l		0x8(%a6), %d2		# get regval
-
-	mov.w		([0xc,%a6],0x0),%d0
-	mov.w		([0xc,%a6],0x2),%d1
-
-	ext.l		%d0			# sign extend lo bnd
-	ext.l		%d1			# sign extend hi bnd
-	bra.w		l_cmp2_cmp		# go do the compare emulation
-
-	global		_060LSP__cmp2_Al_
-_060LSP__cmp2_Al_:
-
-# PROLOGUE BEGIN ########################################################
-	link.w		%a6,&-4
-	movm.l		&0x3800,-(%sp)		# save d2-d4
-#	fmovm.l		&0x0,-(%sp)		# save no fpregs
-# PROLOGUE END ##########################################################
-
-	mov.w		%cc,CMP2_CC(%a6)
-	mov.l		0x8(%a6), %d2		# get regval
-
-	mov.l		([0xc,%a6],0x0),%d0
-	mov.l		([0xc,%a6],0x4),%d1
-	bra.w		l_cmp2_cmp		# go do the compare emulation
-
-	global		_060LSP__cmp2_Db_
-_060LSP__cmp2_Db_:
-
-# PROLOGUE BEGIN ########################################################
-	link.w		%a6,&-4
-	movm.l		&0x3800,-(%sp)		# save d2-d4
-#	fmovm.l		&0x0,-(%sp)		# save no fpregs
-# PROLOGUE END ##########################################################
-
-	mov.w		%cc,CMP2_CC(%a6)
-	mov.l		0x8(%a6), %d2		# get regval
-
-	mov.b		([0xc,%a6],0x0),%d0
-	mov.b		([0xc,%a6],0x1),%d1
-
-	extb.l		%d0			# sign extend lo bnd
-	extb.l		%d1			# sign extend hi bnd
-
-# operation is a data register compare.
-# sign extend byte to long so we can do simple longword compares.
-	extb.l		%d2			# sign extend data byte
-	bra.w		l_cmp2_cmp		# go do the compare emulation
-
-	global		_060LSP__cmp2_Dw_
-_060LSP__cmp2_Dw_:
-
-# PROLOGUE BEGIN ########################################################
-	link.w		%a6,&-4
-	movm.l		&0x3800,-(%sp)		# save d2-d4
-#	fmovm.l		&0x0,-(%sp)		# save no fpregs
-# PROLOGUE END ##########################################################
-
-	mov.w		%cc,CMP2_CC(%a6)
-	mov.l		0x8(%a6), %d2		# get regval
-
-	mov.w		([0xc,%a6],0x0),%d0
-	mov.w		([0xc,%a6],0x2),%d1
-
-	ext.l		%d0			# sign extend lo bnd
-	ext.l		%d1			# sign extend hi bnd
-
-# operation is a data register compare.
-# sign extend word to long so we can do simple longword compares.
-	ext.l		%d2			# sign extend data word
-	bra.w		l_cmp2_cmp		# go emulate compare
-
-	global		_060LSP__cmp2_Dl_
-_060LSP__cmp2_Dl_:
-
-# PROLOGUE BEGIN ########################################################
-	link.w		%a6,&-4
-	movm.l		&0x3800,-(%sp)		# save d2-d4
-#	fmovm.l		&0x0,-(%sp)		# save no fpregs
-# PROLOGUE END ##########################################################
-
-	mov.w		%cc,CMP2_CC(%a6)
-	mov.l		0x8(%a6), %d2		# get regval
-
-	mov.l		([0xc,%a6],0x0),%d0
-	mov.l		([0xc,%a6],0x4),%d1
-
-#
-# To set the ccodes correctly:
-#	(1) save 'Z' bit from (Rn - lo)
-#	(2) save 'Z' and 'N' bits from ((hi - lo) - (Rn - hi))
-#	(3) keep 'X', 'N', and 'V' from before instruction
-#	(4) combine ccodes
-#
-l_cmp2_cmp:
-	sub.l		%d0, %d2		# (Rn - lo)
-	mov.w		%cc, %d3		# fetch resulting ccodes
-	andi.b		&0x4, %d3		# keep 'Z' bit
-	sub.l		%d0, %d1		# (hi - lo)
-	cmp.l		%d1,%d2			# ((hi - lo) - (Rn - hi))
-
-	mov.w		%cc, %d4		# fetch resulting ccodes
-	or.b		%d4, %d3		# combine w/ earlier ccodes
-	andi.b		&0x5, %d3		# keep 'Z' and 'N'
-
-	mov.w		CMP2_CC(%a6), %d4	# fetch old ccodes
-	andi.b		&0x1a, %d4		# keep 'X','N','V' bits
-	or.b		%d3, %d4		# insert new ccodes
-	mov.w		%d4,%cc			# save new ccodes
-
-# EPILOGUE BEGIN ########################################################
-#	fmovm.l		(%sp)+,&0x0		# restore no fpregs
-	movm.l		(%sp)+,&0x001c		# restore d2-d4
-	unlk		%a6
-# EPILOGUE END ##########################################################
-
-	rts
diff --git a/ANDROID_3.4.5/arch/m68k/ifpsp060/src/isp.S b/ANDROID_3.4.5/arch/m68k/ifpsp060/src/isp.S
deleted file mode 100644
index 6dccda76..00000000
--- a/ANDROID_3.4.5/arch/m68k/ifpsp060/src/isp.S
+++ /dev/null
@@ -1,4299 +0,0 @@
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-MOTOROLA MICROPROCESSOR & MEMORY TECHNOLOGY GROUP
-M68000 Hi-Performance Microprocessor Division
-M68060 Software Package
-Production Release P1.00 -- October 10, 1994
-
-M68060 Software Package Copyright © 1993, 1994 Motorola Inc.  All rights reserved.
-
-THE SOFTWARE is provided on an "AS IS" basis and without warranty.
-To the maximum extent permitted by applicable law,
-MOTOROLA DISCLAIMS ALL WARRANTIES WHETHER EXPRESS OR IMPLIED,
-INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
-and any warranty against infringement with regard to the SOFTWARE
-(INCLUDING ANY MODIFIED VERSIONS THEREOF) and any accompanying written materials.
-
-To the maximum extent permitted by applicable law,
-IN NO EVENT SHALL MOTOROLA BE LIABLE FOR ANY DAMAGES WHATSOEVER
-(INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS,
-BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, OR OTHER PECUNIARY LOSS)
-ARISING OF THE USE OR INABILITY TO USE THE SOFTWARE.
-Motorola assumes no responsibility for the maintenance and support of the SOFTWARE.
-
-You are hereby granted a copyright license to use, modify, and distribute the SOFTWARE
-so long as this entire notice is retained without alteration in any modified and/or
-redistributed versions, and that such modified versions are clearly identified as such.
-No licenses are granted by implication, estoppel or otherwise under any patents
-or trademarks of Motorola, Inc.
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-# ireal.s:
-#	This file is appended to the top of the 060ISP package
-# and contains the entry points into the package. The user, in
-# effect, branches to one of the branch table entries located
-# after _060ISP_TABLE.
-#	Also, subroutine stubs exist in this file (_isp_done for
-# example) that are referenced by the ISP package itself in order
-# to call a given routine. The stub routine actually performs the
-# callout. The ISP code does a "bsr" to the stub routine. This
-# extra layer of hierarchy adds a slight performance penalty but
-# it makes the ISP code easier to read and more mainatinable.
-#
-
-set	_off_chk,	0x00
-set	_off_divbyzero,	0x04
-set	_off_trace,	0x08
-set	_off_access,	0x0c
-set	_off_done,	0x10
-
-set	_off_cas,	0x14
-set	_off_cas2,	0x18
-set	_off_lock,	0x1c
-set	_off_unlock,	0x20
-
-set	_off_imr,	0x40
-set	_off_dmr,	0x44
-set	_off_dmw,	0x48
-set	_off_irw,	0x4c
-set	_off_irl,	0x50
-set	_off_drb,	0x54
-set	_off_drw,	0x58
-set	_off_drl,	0x5c
-set	_off_dwb,	0x60
-set	_off_dww,	0x64
-set	_off_dwl,	0x68
-
-_060ISP_TABLE:
-
-# Here's the table of ENTRY POINTS for those linking the package.
-	bra.l		_isp_unimp
-	short		0x0000
-
-	bra.l		_isp_cas
-	short		0x0000
-
-	bra.l		_isp_cas2
-	short		0x0000
-
-	bra.l		_isp_cas_finish
-	short		0x0000
-
-	bra.l		_isp_cas2_finish
-	short		0x0000
-
-	bra.l		_isp_cas_inrange
-	short		0x0000
-
-	bra.l		_isp_cas_terminate
-	short		0x0000
-
-	bra.l		_isp_cas_restart
-	short		0x0000
-
-	space		64
-
-#############################################################
-
-	global		_real_chk
-_real_chk:
-	mov.l		%d0,-(%sp)
-	mov.l		(_060ISP_TABLE-0x80+_off_chk,%pc),%d0
-	pea.l		(_060ISP_TABLE-0x80,%pc,%d0)
-	mov.l		0x4(%sp),%d0
-	rtd		&0x4
-
-	global		_real_divbyzero
-_real_divbyzero:
-	mov.l		%d0,-(%sp)
-	mov.l		(_060ISP_TABLE-0x80+_off_divbyzero,%pc),%d0
-	pea.l		(_060ISP_TABLE-0x80,%pc,%d0)
-	mov.l		0x4(%sp),%d0
-	rtd		&0x4
-
-	global		_real_trace
-_real_trace:
-	mov.l		%d0,-(%sp)
-	mov.l		(_060ISP_TABLE-0x80+_off_trace,%pc),%d0
-	pea.l		(_060ISP_TABLE-0x80,%pc,%d0)
-	mov.l		0x4(%sp),%d0
-	rtd		&0x4
-
-	global		_real_access
-_real_access:
-	mov.l		%d0,-(%sp)
-	mov.l		(_060ISP_TABLE-0x80+_off_access,%pc),%d0
-	pea.l		(_060ISP_TABLE-0x80,%pc,%d0)
-	mov.l		0x4(%sp),%d0
-	rtd		&0x4
-
-	global		_isp_done
-_isp_done:
-	mov.l		%d0,-(%sp)
-	mov.l		(_060ISP_TABLE-0x80+_off_done,%pc),%d0
-	pea.l		(_060ISP_TABLE-0x80,%pc,%d0)
-	mov.l		0x4(%sp),%d0
-	rtd		&0x4
-
-#######################################
-
-	global		_real_cas
-_real_cas:
-	mov.l		%d0,-(%sp)
-	mov.l		(_060ISP_TABLE-0x80+_off_cas,%pc),%d0
-	pea.l		(_060ISP_TABLE-0x80,%pc,%d0)
-	mov.l		0x4(%sp),%d0
-	rtd		&0x4
-
-	global		_real_cas2
-_real_cas2:
-	mov.l		%d0,-(%sp)
-	mov.l		(_060ISP_TABLE-0x80+_off_cas2,%pc),%d0
-	pea.l		(_060ISP_TABLE-0x80,%pc,%d0)
-	mov.l		0x4(%sp),%d0
-	rtd		&0x4
-
-	global		_real_lock_page
-_real_lock_page:
-	mov.l		%d0,-(%sp)
-	mov.l		(_060ISP_TABLE-0x80+_off_lock,%pc),%d0
-	pea.l		(_060ISP_TABLE-0x80,%pc,%d0)
-	mov.l		0x4(%sp),%d0
-	rtd		&0x4
-
-	global		_real_unlock_page
-_real_unlock_page:
-	mov.l		%d0,-(%sp)
-	mov.l		(_060ISP_TABLE-0x80+_off_unlock,%pc),%d0
-	pea.l		(_060ISP_TABLE-0x80,%pc,%d0)
-	mov.l		0x4(%sp),%d0
-	rtd		&0x4
-
-#######################################
-
-	global		_imem_read
-_imem_read:
-	mov.l		%d0,-(%sp)
-	mov.l		(_060ISP_TABLE-0x80+_off_imr,%pc),%d0
-	pea.l		(_060ISP_TABLE-0x80,%pc,%d0)
-	mov.l		0x4(%sp),%d0
-	rtd		&0x4
-
-	global		_dmem_read
-_dmem_read:
-	mov.l		%d0,-(%sp)
-	mov.l		(_060ISP_TABLE-0x80+_off_dmr,%pc),%d0
-	pea.l		(_060ISP_TABLE-0x80,%pc,%d0)
-	mov.l		0x4(%sp),%d0
-	rtd		&0x4
-
-	global		_dmem_write
-_dmem_write:
-	mov.l		%d0,-(%sp)
-	mov.l		(_060ISP_TABLE-0x80+_off_dmw,%pc),%d0
-	pea.l		(_060ISP_TABLE-0x80,%pc,%d0)
-	mov.l		0x4(%sp),%d0
-	rtd		&0x4
-
-	global		_imem_read_word
-_imem_read_word:
-	mov.l		%d0,-(%sp)
-	mov.l		(_060ISP_TABLE-0x80+_off_irw,%pc),%d0
-	pea.l		(_060ISP_TABLE-0x80,%pc,%d0)
-	mov.l		0x4(%sp),%d0
-	rtd		&0x4
-
-	global		_imem_read_long
-_imem_read_long:
-	mov.l		%d0,-(%sp)
-	mov.l		(_060ISP_TABLE-0x80+_off_irl,%pc),%d0
-	pea.l		(_060ISP_TABLE-0x80,%pc,%d0)
-	mov.l		0x4(%sp),%d0
-	rtd		&0x4
-
-	global		_dmem_read_byte
-_dmem_read_byte:
-	mov.l		%d0,-(%sp)
-	mov.l		(_060ISP_TABLE-0x80+_off_drb,%pc),%d0
-	pea.l		(_060ISP_TABLE-0x80,%pc,%d0)
-	mov.l		0x4(%sp),%d0
-	rtd		&0x4
-
-	global		_dmem_read_word
-_dmem_read_word:
-	mov.l		%d0,-(%sp)
-	mov.l		(_060ISP_TABLE-0x80+_off_drw,%pc),%d0
-	pea.l		(_060ISP_TABLE-0x80,%pc,%d0)
-	mov.l		0x4(%sp),%d0
-	rtd		&0x4
-
-	global		_dmem_read_long
-_dmem_read_long:
-	mov.l		%d0,-(%sp)
-	mov.l		(_060ISP_TABLE-0x80+_off_drl,%pc),%d0
-	pea.l		(_060ISP_TABLE-0x80,%pc,%d0)
-	mov.l		0x4(%sp),%d0
-	rtd		&0x4
-
-	global		_dmem_write_byte
-_dmem_write_byte:
-	mov.l		%d0,-(%sp)
-	mov.l		(_060ISP_TABLE-0x80+_off_dwb,%pc),%d0
-	pea.l		(_060ISP_TABLE-0x80,%pc,%d0)
-	mov.l		0x4(%sp),%d0
-	rtd		&0x4
-
-	global		_dmem_write_word
-_dmem_write_word:
-	mov.l		%d0,-(%sp)
-	mov.l		(_060ISP_TABLE-0x80+_off_dww,%pc),%d0
-	pea.l		(_060ISP_TABLE-0x80,%pc,%d0)
-	mov.l		0x4(%sp),%d0
-	rtd		&0x4
-
-	global		_dmem_write_long
-_dmem_write_long:
-	mov.l		%d0,-(%sp)
-	mov.l		(_060ISP_TABLE-0x80+_off_dwl,%pc),%d0
-	pea.l		(_060ISP_TABLE-0x80,%pc,%d0)
-	mov.l		0x4(%sp),%d0
-	rtd		&0x4
-
-#
-# This file contains a set of define statements for constants
-# in oreder to promote readability within the core code itself.
-#
-
-set LOCAL_SIZE,		96			# stack frame size(bytes)
-set LV,			-LOCAL_SIZE		# stack offset
-
-set EXC_ISR,		0x4			# stack status register
-set EXC_IPC,		0x6			# stack pc
-set EXC_IVOFF,		0xa			# stacked vector offset
-
-set EXC_AREGS,		LV+64			# offset of all address regs
-set EXC_DREGS,		LV+32			# offset of all data regs
-
-set EXC_A7,		EXC_AREGS+(7*4)		# offset of a7
-set EXC_A6,		EXC_AREGS+(6*4)		# offset of a6
-set EXC_A5,		EXC_AREGS+(5*4)		# offset of a5
-set EXC_A4,		EXC_AREGS+(4*4)		# offset of a4
-set EXC_A3,		EXC_AREGS+(3*4)		# offset of a3
-set EXC_A2,		EXC_AREGS+(2*4)		# offset of a2
-set EXC_A1,		EXC_AREGS+(1*4)		# offset of a1
-set EXC_A0,		EXC_AREGS+(0*4)		# offset of a0
-set EXC_D7,		EXC_DREGS+(7*4)		# offset of d7
-set EXC_D6,		EXC_DREGS+(6*4)		# offset of d6
-set EXC_D5,		EXC_DREGS+(5*4)		# offset of d5
-set EXC_D4,		EXC_DREGS+(4*4)		# offset of d4
-set EXC_D3,		EXC_DREGS+(3*4)		# offset of d3
-set EXC_D2,		EXC_DREGS+(2*4)		# offset of d2
-set EXC_D1,		EXC_DREGS+(1*4)		# offset of d1
-set EXC_D0,		EXC_DREGS+(0*4)		# offset of d0
-
-set EXC_TEMP,		LV+16			# offset of temp stack space
-
-set EXC_SAVVAL,		LV+12			# offset of old areg value
-set EXC_SAVREG,		LV+11			# offset of old areg index
-
-set SPCOND_FLG,		LV+10			# offset of spc condition flg
-
-set EXC_CC,		LV+8			# offset of cc register
-set EXC_EXTWPTR,	LV+4			# offset of current PC
-set EXC_EXTWORD,	LV+2			# offset of current ext opword
-set EXC_OPWORD,		LV+0			# offset of current opword
-
-###########################
-# SPecial CONDition FLaGs #
-###########################
-set mia7_flg,		0x04			# (a7)+ flag
-set mda7_flg,		0x08			# -(a7) flag
-set ichk_flg,		0x10			# chk exception flag
-set idbyz_flg,		0x20			# divbyzero flag
-set restore_flg,	0x40			# restore -(an)+ flag
-set immed_flg,		0x80			# immediate data flag
-
-set mia7_bit,		0x2			# (a7)+ bit
-set mda7_bit,		0x3			# -(a7) bit
-set ichk_bit,		0x4			# chk exception bit
-set idbyz_bit,		0x5			# divbyzero bit
-set restore_bit,	0x6			# restore -(a7)+ bit
-set immed_bit,		0x7			# immediate data bit
-
-#########
-# Misc. #
-#########
-set BYTE,		1			# len(byte) == 1 byte
-set WORD,		2			# len(word) == 2 bytes
-set LONG,		4			# len(longword) == 4 bytes
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	_isp_unimp(): 060ISP entry point for Unimplemented Instruction	#
-#									#
-#	This handler should be the first code executed upon taking the	#
-#	"Unimplemented Integer Instruction" exception in an operating	#
-#	system.								#
-#									#
-# XREF ****************************************************************	#
-#	_imem_read_{word,long}() - read instruction word/longword	#
-#	_mul64() - emulate 64-bit multiply				#
-#	_div64() - emulate 64-bit divide				#
-#	_moveperipheral() - emulate "movep"				#
-#	_compandset() - emulate misaligned "cas"			#
-#	_compandset2() - emulate "cas2"					#
-#	_chk2_cmp2() - emulate "cmp2" and "chk2"			#
-#	_isp_done() - "callout" for normal final exit			#
-#	_real_trace() - "callout" for Trace exception			#
-#	_real_chk() - "callout" for Chk exception			#
-#	_real_divbyzero() - "callout" for DZ exception			#
-#	_real_access() - "callout" for access error exception		#
-#									#
-# INPUT ***************************************************************	#
-#	- The system stack contains the Unimp Int Instr stack frame	#
-#									#
-# OUTPUT **************************************************************	#
-#	If Trace exception:						#
-#	- The system stack changed to contain Trace exc stack frame	#
-#	If Chk exception:						#
-#	- The system stack changed to contain Chk exc stack frame	#
-#	If DZ exception:						#
-#	- The system stack changed to contain DZ exc stack frame	#
-#	If access error exception:					#
-#	- The system stack changed to contain access err exc stk frame	#
-#	Else:								#
-#	- Results saved as appropriate					#
-#									#
-# ALGORITHM ***********************************************************	#
-#	This handler fetches the first instruction longword from	#
-# memory and decodes it to determine which of the unimplemented		#
-# integer instructions caused this exception. This handler then calls	#
-# one of _mul64(), _div64(), _moveperipheral(), _compandset(),		#
-# _compandset2(), or _chk2_cmp2() as appropriate.			#
-#	Some of these instructions, by their nature, may produce other	#
-# types of exceptions. "div" can produce a divide-by-zero exception,	#
-# and "chk2" can cause a "Chk" exception. In both cases, the current	#
-# exception stack frame must be converted to an exception stack frame	#
-# of the correct exception type and an exit must be made through	#
-# _real_divbyzero() or _real_chk() as appropriate. In addition, all	#
-# instructions may be executing while Trace is enabled. If so, then	#
-# a Trace exception stack frame must be created and an exit made	#
-# through _real_trace().						#
-#	Meanwhile, if any read or write to memory using the		#
-# _mem_{read,write}() "callout"s returns a failing value, then an	#
-# access error frame must be created and an exit made through		#
-# _real_access().							#
-#	If none of these occur, then a normal exit is made through	#
-# _isp_done().								#
-#									#
-#	This handler, upon entry, saves almost all user-visible		#
-# address and data registers to the stack. Although this may seem to	#
-# cause excess memory traffic, it was found that due to having to	#
-# access these register files for things like data retrieval and <ea>	#
-# calculations, it was more efficient to have them on the stack where	#
-# they could be accessed by indexing rather than to make subroutine	#
-# calls to retrieve a register of a particular index.			#
-#									#
-#########################################################################
-
-	global		_isp_unimp
-_isp_unimp:
-	link.w		%a6,&-LOCAL_SIZE	# create room for stack frame
-
-	movm.l		&0x3fff,EXC_DREGS(%a6)	# store d0-d7/a0-a5
-	mov.l		(%a6),EXC_A6(%a6)	# store a6
-
-	btst		&0x5,EXC_ISR(%a6)	# from s or u mode?
-	bne.b		uieh_s			# supervisor mode
-uieh_u:
-	mov.l		%usp,%a0		# fetch user stack pointer
-	mov.l		%a0,EXC_A7(%a6)		# store a7
-	bra.b		uieh_cont
-uieh_s:
-	lea		0xc(%a6),%a0
-	mov.l		%a0,EXC_A7(%a6)		# store corrected sp
-
-###############################################################################
-
-uieh_cont:
-	clr.b		SPCOND_FLG(%a6)		# clear "special case" flag
-
-	mov.w		EXC_ISR(%a6),EXC_CC(%a6) # store cc copy on stack
-	mov.l		EXC_IPC(%a6),EXC_EXTWPTR(%a6) # store extwptr on stack
-
-#
-# fetch the opword and first extension word pointed to by the stacked pc
-# and store them to the stack for now
-#
-	mov.l		EXC_EXTWPTR(%a6),%a0	# fetch instruction addr
-	addq.l		&0x4,EXC_EXTWPTR(%a6)	# incr instruction ptr
-	bsr.l		_imem_read_long		# fetch opword & extword
-	mov.l		%d0,EXC_OPWORD(%a6)	# store extword on stack
-
-
-#########################################################################
-# muls.l	0100 1100 00 |<ea>|	0*** 1100 0000 0***		#
-# mulu.l	0100 1100 00 |<ea>|	0*** 0100 0000 0***		#
-#									#
-# divs.l	0100 1100 01 |<ea>|	0*** 1100 0000 0***		#
-# divu.l	0100 1100 01 |<ea>|	0*** 0100 0000 0***		#
-#									#
-# movep.w m2r	0000 ***1 00 001***	| <displacement>  |		#
-# movep.l m2r	0000 ***1 01 001***	| <displacement>  |		#
-# movep.w r2m	0000 ***1 10 001***	| <displacement>  |		#
-# movep.l r2m	0000 ***1 11 001***	| <displacement>  |		#
-#									#
-# cas.w		0000 1100 11 |<ea>|	0000 000* **00 0***		#
-# cas.l		0000 1110 11 |<ea>|	0000 000* **00 0***		#
-#									#
-# cas2.w	0000 1100 11 111100	**** 000* **00 0***		#
-#					**** 000* **00 0***		#
-# cas2.l	0000 1110 11 111100	**** 000* **00 0***		#
-#					**** 000* **00 0***		#
-#									#
-# chk2.b	0000 0000 11 |<ea>|	**** 1000 0000 0000		#
-# chk2.w	0000 0010 11 |<ea>|	**** 1000 0000 0000		#
-# chk2.l	0000 0100 11 |<ea>|	**** 1000 0000 0000		#
-#									#
-# cmp2.b	0000 0000 11 |<ea>|	**** 0000 0000 0000		#
-# cmp2.w	0000 0010 11 |<ea>|	**** 0000 0000 0000		#
-# cmp2.l	0000 0100 11 |<ea>|	**** 0000 0000 0000		#
-#########################################################################
-
-#
-# using bit 14 of the operation word, separate into 2 groups:
-# (group1) mul64, div64
-# (group2) movep, chk2, cmp2, cas2, cas
-#
-	btst		&0x1e,%d0		# group1 or group2
-	beq.b		uieh_group2		# go handle group2
-
-#
-# now, w/ group1, make mul64's decode the fastest since it will
-# most likely be used the most.
-#
-uieh_group1:
-	btst		&0x16,%d0		# test for div64
-	bne.b		uieh_div64		# go handle div64
-
-uieh_mul64:
-# mul64() may use ()+ addressing and may, therefore, alter a7
-
-	bsr.l		_mul64			# _mul64()
-
-	btst		&0x5,EXC_ISR(%a6)	# supervisor mode?
-	beq.w		uieh_done
-	btst		&mia7_bit,SPCOND_FLG(%a6) # was a7 changed?
-	beq.w		uieh_done		# no
-	btst		&0x7,EXC_ISR(%a6)	# is trace enabled?
-	bne.w		uieh_trace_a7		# yes
-	bra.w		uieh_a7			# no
-
-uieh_div64:
-# div64() may use ()+ addressing and may, therefore, alter a7.
-# div64() may take a divide by zero exception.
-
-	bsr.l		_div64			# _div64()
-
-# here, we sort out all of the special cases that may have happened.
-	btst		&mia7_bit,SPCOND_FLG(%a6) # was a7 changed?
-	bne.b		uieh_div64_a7		# yes
-uieh_div64_dbyz:
-	btst		&idbyz_bit,SPCOND_FLG(%a6) # did divide-by-zero occur?
-	bne.w		uieh_divbyzero		# yes
-	bra.w		uieh_done		# no
-uieh_div64_a7:
-	btst		&0x5,EXC_ISR(%a6)	# supervisor mode?
-	beq.b		uieh_div64_dbyz		# no
-# here, a7 has been incremented by 4 bytes in supervisor mode. we still
-# may have the following 3 cases:
-#	(i)	(a7)+
-#	(ii)	(a7)+; trace
-#	(iii)	(a7)+; divide-by-zero
-#
-	btst		&idbyz_bit,SPCOND_FLG(%a6) # did divide-by-zero occur?
-	bne.w		uieh_divbyzero_a7	# yes
-	tst.b		EXC_ISR(%a6)		# no; is trace enabled?
-	bmi.w		uieh_trace_a7		# yes
-	bra.w		uieh_a7			# no
-
-#
-# now, w/ group2, make movep's decode the fastest since it will
-# most likely be used the most.
-#
-uieh_group2:
-	btst		&0x18,%d0		# test for not movep
-	beq.b		uieh_not_movep
-
-
-	bsr.l		_moveperipheral		# _movep()
-	bra.w		uieh_done
-
-uieh_not_movep:
-	btst		&0x1b,%d0		# test for chk2,cmp2
-	beq.b		uieh_chk2cmp2		# go handle chk2,cmp2
-
-	swap		%d0			# put opword in lo word
-	cmpi.b		%d0,&0xfc		# test for cas2
-	beq.b		uieh_cas2		# go handle cas2
-
-uieh_cas:
-
-	bsr.l		_compandset		# _cas()
-
-# the cases of "cas Dc,Du,(a7)+" and "cas Dc,Du,-(a7)" used from supervisor
-# mode are simply not considered valid and therefore are not handled.
-
-	bra.w		uieh_done
-
-uieh_cas2:
-
-	mov.l		EXC_EXTWPTR(%a6),%a0	# fetch instruction addr
-	addq.l		&0x2,EXC_EXTWPTR(%a6)	# incr instruction ptr
-	bsr.l		_imem_read_word		# read extension word
-
-	tst.l		%d1			# ifetch error?
-	bne.w		isp_iacc		# yes
-
-	bsr.l		_compandset2		# _cas2()
-	bra.w		uieh_done
-
-uieh_chk2cmp2:
-# chk2 may take a chk exception
-
-	bsr.l		_chk2_cmp2		# _chk2_cmp2()
-
-# here we check to see if a chk trap should be taken
-	cmpi.b		SPCOND_FLG(%a6),&ichk_flg
-	bne.w		uieh_done
-	bra.b		uieh_chk_trap
-
-###########################################################################
-
-#
-# the required emulation has been completed. now, clean up the necessary stack
-# info and prepare for rte
-#
-uieh_done:
-	mov.b		EXC_CC+1(%a6),EXC_ISR+1(%a6) # insert new ccodes
-
-# if exception occurred in user mode, then we have to restore a7 in case it
-# changed. we don't have to update a7  for supervisor mose because that case
-# doesn't flow through here
-	btst		&0x5,EXC_ISR(%a6)	# user or supervisor?
-	bne.b		uieh_finish		# supervisor
-
-	mov.l		EXC_A7(%a6),%a0		# fetch user stack pointer
-	mov.l		%a0,%usp		# restore it
-
-uieh_finish:
-	movm.l		EXC_DREGS(%a6),&0x3fff	# restore d0-d7/a0-a5
-
-	btst		&0x7,EXC_ISR(%a6)	# is trace mode on?
-	bne.b		uieh_trace		# yes;go handle trace mode
-
-	mov.l		EXC_EXTWPTR(%a6),EXC_IPC(%a6) # new pc on stack frame
-	mov.l		EXC_A6(%a6),(%a6)	# prepare new a6 for unlink
-	unlk		%a6			# unlink stack frame
-	bra.l		_isp_done
-
-#
-# The instruction that was just emulated was also being traced. The trace
-# trap for this instruction will be lost unless we jump to the trace handler.
-# So, here we create a Trace Exception format number two exception stack
-# frame from the Unimplemented Integer Intruction Exception stack frame
-# format number zero and jump to the user supplied hook "_real_trace()".
-#
-#		   UIEH FRAME		   TRACE FRAME
-#		*****************	*****************
-#		* 0x0 *  0x0f4	*	*    Current	*
-#		*****************	*      PC	*
-#		*    Current	*	*****************
-#		*      PC	*	* 0x2 *  0x024	*
-#		*****************	*****************
-#		*      SR	*	*     Next	*
-#		*****************	*      PC	*
-#	      ->*     Old	*	*****************
-#  from link -->*      A6	*	*      SR	*
-#	        *****************	*****************
-#	       /*      A7	*	*      New	* <-- for final unlink
-#	      / *		*	*      A6	*
-# link frame <  *****************	*****************
-#	      \ ~		~	~		~
-#	       \*****************	*****************
-#
-uieh_trace:
-	mov.l		EXC_A6(%a6),-0x4(%a6)
-	mov.w		EXC_ISR(%a6),0x0(%a6)
-	mov.l		EXC_IPC(%a6),0x8(%a6)
-	mov.l		EXC_EXTWPTR(%a6),0x2(%a6)
-	mov.w		&0x2024,0x6(%a6)
-	sub.l		&0x4,%a6
-	unlk		%a6
-	bra.l		_real_trace
-
-#
-#	   UIEH FRAME		    CHK FRAME
-#	*****************	*****************
-#	* 0x0 *  0x0f4	*	*    Current	*
-#	*****************	*      PC	*
-#	*    Current	*	*****************
-#	*      PC	*	* 0x2 *  0x018	*
-#	*****************	*****************
-#	*      SR	*	*     Next	*
-#	*****************	*      PC	*
-#	    (4 words)		*****************
-#				*      SR	*
-#				*****************
-#				    (6 words)
-#
-# the chk2 instruction should take a chk trap. so, here we must create a
-# chk stack frame from an unimplemented integer instruction exception frame
-# and jump to the user supplied entry point "_real_chk()".
-#
-uieh_chk_trap:
-	mov.b		EXC_CC+1(%a6),EXC_ISR+1(%a6) # insert new ccodes
-	movm.l		EXC_DREGS(%a6),&0x3fff	# restore d0-d7/a0-a5
-
-	mov.w		EXC_ISR(%a6),(%a6)	# put new SR on stack
-	mov.l		EXC_IPC(%a6),0x8(%a6)	# put "Current PC" on stack
-	mov.l		EXC_EXTWPTR(%a6),0x2(%a6) # put "Next PC" on stack
-	mov.w		&0x2018,0x6(%a6)	# put Vector Offset on stack
-
-	mov.l		EXC_A6(%a6),%a6		# restore a6
-	add.l		&LOCAL_SIZE,%sp		# clear stack frame
-
-	bra.l		_real_chk
-
-#
-#	   UIEH FRAME		 DIVBYZERO FRAME
-#	*****************	*****************
-#	* 0x0 *  0x0f4	*	*    Current	*
-#	*****************	*      PC	*
-#	*    Current	*	*****************
-#	*      PC	*	* 0x2 *  0x014	*
-#	*****************	*****************
-#	*      SR	*	*     Next	*
-#	*****************	*      PC	*
-#	    (4 words)		*****************
-#				*      SR	*
-#				*****************
-#				    (6 words)
-#
-# the divide instruction should take an integer divide by zero trap. so, here
-# we must create a divbyzero stack frame from an unimplemented integer
-# instruction exception frame and jump to the user supplied entry point
-# "_real_divbyzero()".
-#
-uieh_divbyzero:
-	mov.b		EXC_CC+1(%a6),EXC_ISR+1(%a6) # insert new ccodes
-	movm.l		EXC_DREGS(%a6),&0x3fff	# restore d0-d7/a0-a5
-
-	mov.w		EXC_ISR(%a6),(%a6)	# put new SR on stack
-	mov.l		EXC_IPC(%a6),0x8(%a6)	# put "Current PC" on stack
-	mov.l		EXC_EXTWPTR(%a6),0x2(%a6) # put "Next PC" on stack
-	mov.w		&0x2014,0x6(%a6)	# put Vector Offset on stack
-
-	mov.l		EXC_A6(%a6),%a6		# restore a6
-	add.l		&LOCAL_SIZE,%sp		# clear stack frame
-
-	bra.l		_real_divbyzero
-
-#
-#				 DIVBYZERO FRAME
-#				*****************
-#				*    Current	*
-#	   UIEH FRAME		*      PC	*
-#	*****************	*****************
-#	* 0x0 *  0x0f4	*	* 0x2 * 0x014	*
-#	*****************	*****************
-#	*    Current	*	*     Next	*
-#	*      PC	*	*      PC	*
-#	*****************	*****************
-#	*      SR	*	*      SR	*
-#	*****************	*****************
-#	    (4 words)		    (6 words)
-#
-# the divide instruction should take an integer divide by zero trap. so, here
-# we must create a divbyzero stack frame from an unimplemented integer
-# instruction exception frame and jump to the user supplied entry point
-# "_real_divbyzero()".
-#
-# However, we must also deal with the fact that (a7)+ was used from supervisor
-# mode, thereby shifting the stack frame up 4 bytes.
-#
-uieh_divbyzero_a7:
-	mov.b		EXC_CC+1(%a6),EXC_ISR+1(%a6) # insert new ccodes
-	movm.l		EXC_DREGS(%a6),&0x3fff	# restore d0-d7/a0-a5
-
-	mov.l		EXC_IPC(%a6),0xc(%a6)	# put "Current PC" on stack
-	mov.w		&0x2014,0xa(%a6)	# put Vector Offset on stack
-	mov.l		EXC_EXTWPTR(%a6),0x6(%a6) # put "Next PC" on stack
-
-	mov.l		EXC_A6(%a6),%a6		# restore a6
-	add.l		&4+LOCAL_SIZE,%sp	# clear stack frame
-
-	bra.l		_real_divbyzero
-
-#
-#				   TRACE FRAME
-#				*****************
-#				*    Current	*
-#	   UIEH FRAME		*      PC	*
-#	*****************	*****************
-#	* 0x0 *  0x0f4	*	* 0x2 * 0x024	*
-#	*****************	*****************
-#	*    Current	*	*     Next	*
-#	*      PC	*	*      PC	*
-#	*****************	*****************
-#	*      SR	*	*      SR	*
-#	*****************	*****************
-#	    (4 words)		    (6 words)
-#
-#
-# The instruction that was just emulated was also being traced. The trace
-# trap for this instruction will be lost unless we jump to the trace handler.
-# So, here we create a Trace Exception format number two exception stack
-# frame from the Unimplemented Integer Intruction Exception stack frame
-# format number zero and jump to the user supplied hook "_real_trace()".
-#
-# However, we must also deal with the fact that (a7)+ was used from supervisor
-# mode, thereby shifting the stack frame up 4 bytes.
-#
-uieh_trace_a7:
-	mov.b		EXC_CC+1(%a6),EXC_ISR+1(%a6) # insert new ccodes
-	movm.l		EXC_DREGS(%a6),&0x3fff	# restore d0-d7/a0-a5
-
-	mov.l		EXC_IPC(%a6),0xc(%a6)	# put "Current PC" on stack
-	mov.w		&0x2024,0xa(%a6)	# put Vector Offset on stack
-	mov.l		EXC_EXTWPTR(%a6),0x6(%a6) # put "Next PC" on stack
-
-	mov.l		EXC_A6(%a6),%a6		# restore a6
-	add.l		&4+LOCAL_SIZE,%sp	# clear stack frame
-
-	bra.l		_real_trace
-
-#
-#				   UIEH FRAME
-#				*****************
-#				* 0x0 * 0x0f4	*
-#	   UIEH FRAME		*****************
-#	*****************	*     Next	*
-#	* 0x0 *  0x0f4	*	*      PC	*
-#	*****************	*****************
-#	*    Current	*	*      SR	*
-#	*      PC	*	*****************
-#	*****************	    (4 words)
-#	*      SR	*
-#	*****************
-#	    (4 words)
-uieh_a7:
-	mov.b		EXC_CC+1(%a6),EXC_ISR+1(%a6) # insert new ccodes
-	movm.l		EXC_DREGS(%a6),&0x3fff	# restore d0-d7/a0-a5
-
-	mov.w		&0x00f4,0xe(%a6)	# put Vector Offset on stack
-	mov.l		EXC_EXTWPTR(%a6),0xa(%a6) # put "Next PC" on stack
-	mov.w		EXC_ISR(%a6),0x8(%a6)	# put SR on stack
-
-	mov.l		EXC_A6(%a6),%a6		# restore a6
-	add.l		&8+LOCAL_SIZE,%sp	# clear stack frame
-	bra.l		_isp_done
-
-##########
-
-# this is the exit point if a data read or write fails.
-# a0 = failing address
-# d0 = fslw
-isp_dacc:
-	mov.l		%a0,(%a6)		# save address
-	mov.l		%d0,-0x4(%a6)		# save partial fslw
-
-	lea		-64(%a6),%sp
-	movm.l		(%sp)+,&0x7fff		# restore d0-d7/a0-a6
-
-	mov.l		0xc(%sp),-(%sp)		# move voff,hi(pc)
-	mov.l		0x4(%sp),0x10(%sp)	# store fslw
-	mov.l		0xc(%sp),0x4(%sp)	# store sr,lo(pc)
-	mov.l		0x8(%sp),0xc(%sp)	# store address
-	mov.l		(%sp)+,0x4(%sp)		# store voff,hi(pc)
-	mov.w		&0x4008,0x6(%sp)	# store new voff
-
-	bra.b		isp_acc_exit
-
-# this is the exit point if an instruction word read fails.
-# FSLW:
-#	misaligned = true
-#	read = true
-#	size = word
-#	instruction = true
-#	software emulation error = true
-isp_iacc:
-	movm.l		EXC_DREGS(%a6),&0x3fff	# restore d0-d7/a0-a5
-	unlk		%a6			# unlink frame
-	sub.w		&0x8,%sp		# make room for acc frame
-	mov.l		0x8(%sp),(%sp)		# store sr,lo(pc)
-	mov.w		0xc(%sp),0x4(%sp)	# store hi(pc)
-	mov.w		&0x4008,0x6(%sp)	# store new voff
-	mov.l		0x2(%sp),0x8(%sp)	# store address (=pc)
-	mov.l		&0x09428001,0xc(%sp)	# store fslw
-
-isp_acc_exit:
-	btst		&0x5,(%sp)		# user or supervisor?
-	beq.b		isp_acc_exit2		# user
-	bset		&0x2,0xd(%sp)		# set supervisor TM bit
-isp_acc_exit2:
-	bra.l		_real_access
-
-# if the addressing mode was (an)+ or -(an), the address register must
-# be restored to its pre-exception value before entering _real_access.
-isp_restore:
-	cmpi.b		SPCOND_FLG(%a6),&restore_flg # do we need a restore?
-	bne.b		isp_restore_done	# no
-	clr.l		%d0
-	mov.b		EXC_SAVREG(%a6),%d0	# regno to restore
-	mov.l		EXC_SAVVAL(%a6),(EXC_AREGS,%a6,%d0.l*4) # restore value
-isp_restore_done:
-	rts
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	_calc_ea(): routine to calculate effective address		#
-#									#
-# XREF ****************************************************************	#
-#	_imem_read_word() - read instruction word			#
-#	_imem_read_long() - read instruction longword			#
-#	_dmem_read_long() - read data longword (for memory indirect)	#
-#	isp_iacc() - handle instruction access error exception		#
-#	isp_dacc() - handle data access error exception			#
-#									#
-# INPUT ***************************************************************	#
-#	d0 = number of bytes related to effective address (w,l)		#
-#									#
-# OUTPUT **************************************************************	#
-#	If exiting through isp_dacc...					#
-#		a0 = failing address					#
-#		d0 = FSLW						#
-#	elsif exiting though isp_iacc...				#
-#		none							#
-#	else								#
-#		a0 = effective address					#
-#									#
-# ALGORITHM ***********************************************************	#
-#	The effective address type is decoded from the opword residing	#
-# on the stack. A jump table is used to vector to a routine for the	#
-# appropriate mode. Since none of the emulated integer instructions	#
-# uses byte-sized operands, only handle word and long operations.	#
-#									#
-#	Dn,An	- shouldn't enter here					#
-#	(An)	- fetch An value from stack				#
-#	-(An)	- fetch An value from stack; return decr value;		#
-#		  place decr value on stack; store old value in case of	#
-#		  future access error; if -(a7), set mda7_flg in	#
-#		  SPCOND_FLG						#
-#	(An)+	- fetch An value from stack; return value;		#
-#		  place incr value on stack; store old value in case of	#
-#		  future access error; if (a7)+, set mia7_flg in	#
-#		  SPCOND_FLG						#
-#	(d16,An) - fetch An value from stack; read d16 using		#
-#		  _imem_read_word(); fetch may fail -> branch to	#
-#		  isp_iacc()						#
-#	(xxx).w,(xxx).l - use _imem_read_{word,long}() to fetch		#
-#		  address; fetch may fail				#
-#	#<data> - return address of immediate value; set immed_flg	#
-#		  in SPCOND_FLG						#
-#	(d16,PC) - fetch stacked PC value; read d16 using		#
-#		  _imem_read_word(); fetch may fail -> branch to	#
-#		  isp_iacc()						#
-#	everything else - read needed displacements as appropriate w/	#
-#		  _imem_read_{word,long}(); read may fail; if memory	#
-#		  indirect, read indirect address using			#
-#		  _dmem_read_long() which may also fail			#
-#									#
-#########################################################################
-
-	global		_calc_ea
-_calc_ea:
-	mov.l		%d0,%a0			# move # bytes to a0
-
-# MODE and REG are taken from the EXC_OPWORD.
-	mov.w		EXC_OPWORD(%a6),%d0	# fetch opcode word
-	mov.w		%d0,%d1			# make a copy
-
-	andi.w		&0x3f,%d0		# extract mode field
-	andi.l		&0x7,%d1		# extract reg  field
-
-# jump to the corresponding function for each {MODE,REG} pair.
-	mov.w		(tbl_ea_mode.b,%pc,%d0.w*2), %d0 # fetch jmp distance
-	jmp		(tbl_ea_mode.b,%pc,%d0.w*1) # jmp to correct ea mode
-
-	swbeg		&64
-tbl_ea_mode:
-	short		tbl_ea_mode	-	tbl_ea_mode
-	short		tbl_ea_mode	-	tbl_ea_mode
-	short		tbl_ea_mode	-	tbl_ea_mode
-	short		tbl_ea_mode	-	tbl_ea_mode
-	short		tbl_ea_mode	-	tbl_ea_mode
-	short		tbl_ea_mode	-	tbl_ea_mode
-	short		tbl_ea_mode	-	tbl_ea_mode
-	short		tbl_ea_mode	-	tbl_ea_mode
-
-	short		tbl_ea_mode	-	tbl_ea_mode
-	short		tbl_ea_mode	-	tbl_ea_mode
-	short		tbl_ea_mode	-	tbl_ea_mode
-	short		tbl_ea_mode	-	tbl_ea_mode
-	short		tbl_ea_mode	-	tbl_ea_mode
-	short		tbl_ea_mode	-	tbl_ea_mode
-	short		tbl_ea_mode	-	tbl_ea_mode
-	short		tbl_ea_mode	-	tbl_ea_mode
-
-	short		addr_ind_a0	-	tbl_ea_mode
-	short		addr_ind_a1	-	tbl_ea_mode
-	short		addr_ind_a2	-	tbl_ea_mode
-	short		addr_ind_a3	-	tbl_ea_mode
-	short		addr_ind_a4	-	tbl_ea_mode
-	short		addr_ind_a5	-	tbl_ea_mode
-	short		addr_ind_a6	-	tbl_ea_mode
-	short		addr_ind_a7	-	tbl_ea_mode
-
-	short		addr_ind_p_a0	-	tbl_ea_mode
-	short		addr_ind_p_a1	-	tbl_ea_mode
-	short		addr_ind_p_a2	-	tbl_ea_mode
-	short		addr_ind_p_a3	-	tbl_ea_mode
-	short		addr_ind_p_a4	-	tbl_ea_mode
-	short		addr_ind_p_a5	-	tbl_ea_mode
-	short		addr_ind_p_a6	-	tbl_ea_mode
-	short		addr_ind_p_a7	-	tbl_ea_mode
-
-	short		addr_ind_m_a0		-	tbl_ea_mode
-	short		addr_ind_m_a1		-	tbl_ea_mode
-	short		addr_ind_m_a2		-	tbl_ea_mode
-	short		addr_ind_m_a3		-	tbl_ea_mode
-	short		addr_ind_m_a4		-	tbl_ea_mode
-	short		addr_ind_m_a5		-	tbl_ea_mode
-	short		addr_ind_m_a6		-	tbl_ea_mode
-	short		addr_ind_m_a7		-	tbl_ea_mode
-
-	short		addr_ind_disp_a0	-	tbl_ea_mode
-	short		addr_ind_disp_a1	-	tbl_ea_mode
-	short		addr_ind_disp_a2	-	tbl_ea_mode
-	short		addr_ind_disp_a3	-	tbl_ea_mode
-	short		addr_ind_disp_a4	-	tbl_ea_mode
-	short		addr_ind_disp_a5	-	tbl_ea_mode
-	short		addr_ind_disp_a6	-	tbl_ea_mode
-	short		addr_ind_disp_a7	-	tbl_ea_mode
-
-	short		_addr_ind_ext		-	tbl_ea_mode
-	short		_addr_ind_ext		-	tbl_ea_mode
-	short		_addr_ind_ext		-	tbl_ea_mode
-	short		_addr_ind_ext		-	tbl_ea_mode
-	short		_addr_ind_ext		-	tbl_ea_mode
-	short		_addr_ind_ext		-	tbl_ea_mode
-	short		_addr_ind_ext		-	tbl_ea_mode
-	short		_addr_ind_ext		-	tbl_ea_mode
-
-	short		abs_short		-	tbl_ea_mode
-	short		abs_long		-	tbl_ea_mode
-	short		pc_ind			-	tbl_ea_mode
-	short		pc_ind_ext		-	tbl_ea_mode
-	short		immediate		-	tbl_ea_mode
-	short		tbl_ea_mode		-	tbl_ea_mode
-	short		tbl_ea_mode		-	tbl_ea_mode
-	short		tbl_ea_mode		-	tbl_ea_mode
-
-###################################
-# Address register indirect: (An) #
-###################################
-addr_ind_a0:
-	mov.l		EXC_A0(%a6),%a0		# Get current a0
-	rts
-
-addr_ind_a1:
-	mov.l		EXC_A1(%a6),%a0		# Get current a1
-	rts
-
-addr_ind_a2:
-	mov.l		EXC_A2(%a6),%a0		# Get current a2
-	rts
-
-addr_ind_a3:
-	mov.l		EXC_A3(%a6),%a0		# Get current a3
-	rts
-
-addr_ind_a4:
-	mov.l		EXC_A4(%a6),%a0		# Get current a4
-	rts
-
-addr_ind_a5:
-	mov.l		EXC_A5(%a6),%a0		# Get current a5
-	rts
-
-addr_ind_a6:
-	mov.l		EXC_A6(%a6),%a0		# Get current a6
-	rts
-
-addr_ind_a7:
-	mov.l		EXC_A7(%a6),%a0		# Get current a7
-	rts
-
-#####################################################
-# Address register indirect w/ postincrement: (An)+ #
-#####################################################
-addr_ind_p_a0:
-	mov.l		%a0,%d0			# copy no. bytes
-	mov.l		EXC_A0(%a6),%a0		# load current value
-	add.l		%a0,%d0			# increment
-	mov.l		%d0,EXC_A0(%a6)		# save incremented value
-
-	mov.l		%a0,EXC_SAVVAL(%a6)	# save in case of access error
-	mov.b		&0x0,EXC_SAVREG(%a6)	# save regno, too
-	mov.b		&restore_flg,SPCOND_FLG(%a6) # set flag
-	rts
-
-addr_ind_p_a1:
-	mov.l		%a0,%d0			# copy no. bytes
-	mov.l		EXC_A1(%a6),%a0		# load current value
-	add.l		%a0,%d0			# increment
-	mov.l		%d0,EXC_A1(%a6)		# save incremented value
-
-	mov.l		%a0,EXC_SAVVAL(%a6)	# save in case of access error
-	mov.b		&0x1,EXC_SAVREG(%a6)	# save regno, too
-	mov.b		&restore_flg,SPCOND_FLG(%a6) # set flag
-	rts
-
-addr_ind_p_a2:
-	mov.l		%a0,%d0			# copy no. bytes
-	mov.l		EXC_A2(%a6),%a0		# load current value
-	add.l		%a0,%d0			# increment
-	mov.l		%d0,EXC_A2(%a6)		# save incremented value
-
-	mov.l		%a0,EXC_SAVVAL(%a6)	# save in case of access error
-	mov.b		&0x2,EXC_SAVREG(%a6)	# save regno, too
-	mov.b		&restore_flg,SPCOND_FLG(%a6) # set flag
-	rts
-
-addr_ind_p_a3:
-	mov.l		%a0,%d0			# copy no. bytes
-	mov.l		EXC_A3(%a6),%a0		# load current value
-	add.l		%a0,%d0			# increment
-	mov.l		%d0,EXC_A3(%a6)		# save incremented value
-
-	mov.l		%a0,EXC_SAVVAL(%a6)	# save in case of access error
-	mov.b		&0x3,EXC_SAVREG(%a6)	# save regno, too
-	mov.b		&restore_flg,SPCOND_FLG(%a6) # set flag
-	rts
-
-addr_ind_p_a4:
-	mov.l		%a0,%d0			# copy no. bytes
-	mov.l		EXC_A4(%a6),%a0		# load current value
-	add.l		%a0,%d0			# increment
-	mov.l		%d0,EXC_A4(%a6)		# save incremented value
-
-	mov.l		%a0,EXC_SAVVAL(%a6)	# save in case of access error
-	mov.b		&0x4,EXC_SAVREG(%a6)	# save regno, too
-	mov.b		&restore_flg,SPCOND_FLG(%a6) # set flag
-	rts
-
-addr_ind_p_a5:
-	mov.l		%a0,%d0			# copy no. bytes
-	mov.l		EXC_A5(%a6),%a0		# load current value
-	add.l		%a0,%d0			# increment
-	mov.l		%d0,EXC_A5(%a6)		# save incremented value
-
-	mov.l		%a0,EXC_SAVVAL(%a6)	# save in case of access error
-	mov.b		&0x5,EXC_SAVREG(%a6)	# save regno, too
-	mov.b		&restore_flg,SPCOND_FLG(%a6) # set flag
-	rts
-
-addr_ind_p_a6:
-	mov.l		%a0,%d0			# copy no. bytes
-	mov.l		EXC_A6(%a6),%a0		# load current value
-	add.l		%a0,%d0			# increment
-	mov.l		%d0,EXC_A6(%a6)		# save incremented value
-
-	mov.l		%a0,EXC_SAVVAL(%a6)	# save in case of access error
-	mov.b		&0x6,EXC_SAVREG(%a6)	# save regno, too
-	mov.b		&restore_flg,SPCOND_FLG(%a6) # set flag
-	rts
-
-addr_ind_p_a7:
-	mov.b		&mia7_flg,SPCOND_FLG(%a6) # set "special case" flag
-
-	mov.l		%a0,%d0			# copy no. bytes
-	mov.l		EXC_A7(%a6),%a0		# load current value
-	add.l		%a0,%d0			# increment
-	mov.l		%d0,EXC_A7(%a6)		# save incremented value
-	rts
-
-####################################################
-# Address register indirect w/ predecrement: -(An) #
-####################################################
-addr_ind_m_a0:
-	mov.l		EXC_A0(%a6),%d0		# Get current a0
-	mov.l		%d0,EXC_SAVVAL(%a6)	# save in case of access error
-	sub.l		%a0,%d0			# Decrement
-	mov.l		%d0,EXC_A0(%a6)		# Save decr value
-	mov.l		%d0,%a0
-
-	mov.b		&0x0,EXC_SAVREG(%a6)	# save regno, too
-	mov.b		&restore_flg,SPCOND_FLG(%a6) # set flag
-	rts
-
-addr_ind_m_a1:
-	mov.l		EXC_A1(%a6),%d0		# Get current a1
-	mov.l		%d0,EXC_SAVVAL(%a6)	# save in case of access error
-	sub.l		%a0,%d0			# Decrement
-	mov.l		%d0,EXC_A1(%a6)		# Save decr value
-	mov.l		%d0,%a0
-
-	mov.b		&0x1,EXC_SAVREG(%a6)	# save regno, too
-	mov.b		&restore_flg,SPCOND_FLG(%a6) # set flag
-	rts
-
-addr_ind_m_a2:
-	mov.l		EXC_A2(%a6),%d0		# Get current a2
-	mov.l		%d0,EXC_SAVVAL(%a6)	# save in case of access error
-	sub.l		%a0,%d0			# Decrement
-	mov.l		%d0,EXC_A2(%a6)		# Save decr value
-	mov.l		%d0,%a0
-
-	mov.b		&0x2,EXC_SAVREG(%a6)	# save regno, too
-	mov.b		&restore_flg,SPCOND_FLG(%a6) # set flag
-	rts
-
-addr_ind_m_a3:
-	mov.l		EXC_A3(%a6),%d0		# Get current a3
-	mov.l		%d0,EXC_SAVVAL(%a6)	# save in case of access error
-	sub.l		%a0,%d0			# Decrement
-	mov.l		%d0,EXC_A3(%a6)		# Save decr value
-	mov.l		%d0,%a0
-
-	mov.b		&0x3,EXC_SAVREG(%a6)	# save regno, too
-	mov.b		&restore_flg,SPCOND_FLG(%a6) # set flag
-	rts
-
-addr_ind_m_a4:
-	mov.l		EXC_A4(%a6),%d0		# Get current a4
-	mov.l		%d0,EXC_SAVVAL(%a6)	# save in case of access error
-	sub.l		%a0,%d0			# Decrement
-	mov.l		%d0,EXC_A4(%a6)		# Save decr value
-	mov.l		%d0,%a0
-
-	mov.b		&0x4,EXC_SAVREG(%a6)	# save regno, too
-	mov.b		&restore_flg,SPCOND_FLG(%a6) # set flag
-	rts
-
-addr_ind_m_a5:
-	mov.l		EXC_A5(%a6),%d0		# Get current a5
-	mov.l		%d0,EXC_SAVVAL(%a6)	# save in case of access error
-	sub.l		%a0,%d0			# Decrement
-	mov.l		%d0,EXC_A5(%a6)		# Save decr value
-	mov.l		%d0,%a0
-
-	mov.b		&0x5,EXC_SAVREG(%a6)	# save regno, too
-	mov.b		&restore_flg,SPCOND_FLG(%a6) # set flag
-	rts
-
-addr_ind_m_a6:
-	mov.l		EXC_A6(%a6),%d0		# Get current a6
-	mov.l		%d0,EXC_SAVVAL(%a6)	# save in case of access error
-	sub.l		%a0,%d0			# Decrement
-	mov.l		%d0,EXC_A6(%a6)		# Save decr value
-	mov.l		%d0,%a0
-
-	mov.b		&0x6,EXC_SAVREG(%a6)	# save regno, too
-	mov.b		&restore_flg,SPCOND_FLG(%a6) # set flag
-	rts
-
-addr_ind_m_a7:
-	mov.b		&mda7_flg,SPCOND_FLG(%a6) # set "special case" flag
-
-	mov.l		EXC_A7(%a6),%d0		# Get current a7
-	sub.l		%a0,%d0			# Decrement
-	mov.l		%d0,EXC_A7(%a6)		# Save decr value
-	mov.l		%d0,%a0
-	rts
-
-########################################################
-# Address register indirect w/ displacement: (d16, An) #
-########################################################
-addr_ind_disp_a0:
-	mov.l		EXC_EXTWPTR(%a6),%a0	# fetch instruction addr
-	addq.l		&0x2,EXC_EXTWPTR(%a6)	# incr instruction ptr
-	bsr.l		_imem_read_word
-
-	tst.l		%d1			# ifetch error?
-	bne.l		isp_iacc		# yes
-
-	mov.w		%d0,%a0			# sign extend displacement
-	add.l		EXC_A0(%a6),%a0		# a0 + d16
-	rts
-
-addr_ind_disp_a1:
-	mov.l		EXC_EXTWPTR(%a6),%a0	# fetch instruction addr
-	addq.l		&0x2,EXC_EXTWPTR(%a6)	# incr instruction ptr
-	bsr.l		_imem_read_word
-
-	tst.l		%d1			# ifetch error?
-	bne.l		isp_iacc		# yes
-
-	mov.w		%d0,%a0			# sign extend displacement
-	add.l		EXC_A1(%a6),%a0		# a1 + d16
-	rts
-
-addr_ind_disp_a2:
-	mov.l		EXC_EXTWPTR(%a6),%a0	# fetch instruction addr
-	addq.l		&0x2,EXC_EXTWPTR(%a6)	# incr instruction ptr
-	bsr.l		_imem_read_word
-
-	tst.l		%d1			# ifetch error?
-	bne.l		isp_iacc		# yes
-
-	mov.w		%d0,%a0			# sign extend displacement
-	add.l		EXC_A2(%a6),%a0		# a2 + d16
-	rts
-
-addr_ind_disp_a3:
-	mov.l		EXC_EXTWPTR(%a6),%a0	# fetch instruction addr
-	addq.l		&0x2,EXC_EXTWPTR(%a6)	# incr instruction ptr
-	bsr.l		_imem_read_word
-
-	tst.l		%d1			# ifetch error?
-	bne.l		isp_iacc		# yes
-
-	mov.w		%d0,%a0			# sign extend displacement
-	add.l		EXC_A3(%a6),%a0		# a3 + d16
-	rts
-
-addr_ind_disp_a4:
-	mov.l		EXC_EXTWPTR(%a6),%a0	# fetch instruction addr
-	addq.l		&0x2,EXC_EXTWPTR(%a6)	# incr instruction ptr
-	bsr.l		_imem_read_word
-
-	tst.l		%d1			# ifetch error?
-	bne.l		isp_iacc		# yes
-
-	mov.w		%d0,%a0			# sign extend displacement
-	add.l		EXC_A4(%a6),%a0		# a4 + d16
-	rts
-
-addr_ind_disp_a5:
-	mov.l		EXC_EXTWPTR(%a6),%a0	# fetch instruction addr
-	addq.l		&0x2,EXC_EXTWPTR(%a6)	# incr instruction ptr
-	bsr.l		_imem_read_word
-
-	tst.l		%d1			# ifetch error?
-	bne.l		isp_iacc		# yes
-
-	mov.w		%d0,%a0			# sign extend displacement
-	add.l		EXC_A5(%a6),%a0		# a5 + d16
-	rts
-
-addr_ind_disp_a6:
-	mov.l		EXC_EXTWPTR(%a6),%a0	# fetch instruction addr
-	addq.l		&0x2,EXC_EXTWPTR(%a6)	# incr instruction ptr
-	bsr.l		_imem_read_word
-
-	tst.l		%d1			# ifetch error?
-	bne.l		isp_iacc		# yes
-
-	mov.w		%d0,%a0			# sign extend displacement
-	add.l		EXC_A6(%a6),%a0		# a6 + d16
-	rts
-
-addr_ind_disp_a7:
-	mov.l		EXC_EXTWPTR(%a6),%a0	# fetch instruction addr
-	addq.l		&0x2,EXC_EXTWPTR(%a6)	# incr instruction ptr
-	bsr.l		_imem_read_word
-
-	tst.l		%d1			# ifetch error?
-	bne.l		isp_iacc		# yes
-
-	mov.w		%d0,%a0			# sign extend displacement
-	add.l		EXC_A7(%a6),%a0		# a7 + d16
-	rts
-
-########################################################################
-# Address register indirect w/ index(8-bit displacement): (dn, An, Xn) #
-#    "       "         "    w/   "  (base displacement): (bd, An, Xn)  #
-# Memory indirect postindexed: ([bd, An], Xn, od)		       #
-# Memory indirect preindexed: ([bd, An, Xn], od)		       #
-########################################################################
-_addr_ind_ext:
-	mov.l		%d1,-(%sp)
-
-	mov.l		EXC_EXTWPTR(%a6),%a0	# fetch instruction addr
-	addq.l		&0x2,EXC_EXTWPTR(%a6)	# incr instruction ptr
-	bsr.l		_imem_read_word		# fetch extword in d0
-
-	tst.l		%d1			# ifetch error?
-	bne.l		isp_iacc		# yes
-
-	mov.l		(%sp)+,%d1
-
-	mov.l		(EXC_AREGS,%a6,%d1.w*4),%a0 # put base in a0
-
-	btst		&0x8,%d0
-	beq.b		addr_ind_index_8bit	# for ext word or not?
-
-	movm.l		&0x3c00,-(%sp)		# save d2-d5
-
-	mov.l		%d0,%d5			# put extword in d5
-	mov.l		%a0,%d3			# put base in d3
-
-	bra.l		calc_mem_ind		# calc memory indirect
-
-addr_ind_index_8bit:
-	mov.l		%d2,-(%sp)		# save old d2
-
-	mov.l		%d0,%d1
-	rol.w		&0x4,%d1
-	andi.w		&0xf,%d1		# extract index regno
-
-	mov.l		(EXC_DREGS,%a6,%d1.w*4),%d1 # fetch index reg value
-
-	btst		&0xb,%d0		# is it word or long?
-	bne.b		aii8_long
-	ext.l		%d1			# sign extend word index
-aii8_long:
-	mov.l		%d0,%d2
-	rol.w		&0x7,%d2
-	andi.l		&0x3,%d2		# extract scale value
-
-	lsl.l		%d2,%d1			# shift index by scale
-
-	extb.l		%d0			# sign extend displacement
-	add.l		%d1,%d0			# index + disp
-	add.l		%d0,%a0			# An + (index + disp)
-
-	mov.l		(%sp)+,%d2		# restore old d2
-	rts
-
-######################
-# Immediate: #<data> #
-#########################################################################
-# word, long: <ea> of the data is the current extension word		#
-#	pointer value. new extension word pointer is simply the old	#
-#	plus the number of bytes in the data type(2 or 4).		#
-#########################################################################
-immediate:
-	mov.b		&immed_flg,SPCOND_FLG(%a6) # set immediate flag
-
-	mov.l		EXC_EXTWPTR(%a6),%a0	# fetch extension word ptr
-	rts
-
-###########################
-# Absolute short: (XXX).W #
-###########################
-abs_short:
-	mov.l		EXC_EXTWPTR(%a6),%a0	# fetch instruction addr
-	addq.l		&0x2,EXC_EXTWPTR(%a6)	# incr instruction ptr
-	bsr.l		_imem_read_word		# fetch short address
-
-	tst.l		%d1			# ifetch error?
-	bne.l		isp_iacc		# yes
-
-	mov.w		%d0,%a0			# return <ea> in a0
-	rts
-
-##########################
-# Absolute long: (XXX).L #
-##########################
-abs_long:
-	mov.l		EXC_EXTWPTR(%a6),%a0	# fetch instruction addr
-	addq.l		&0x4,EXC_EXTWPTR(%a6)	# incr instruction ptr
-	bsr.l		_imem_read_long		# fetch long address
-
-	tst.l		%d1			# ifetch error?
-	bne.l		isp_iacc		# yes
-
-	mov.l		%d0,%a0			# return <ea> in a0
-	rts
-
-#######################################################
-# Program counter indirect w/ displacement: (d16, PC) #
-#######################################################
-pc_ind:
-	mov.l		EXC_EXTWPTR(%a6),%a0	# fetch instruction addr
-	addq.l		&0x2,EXC_EXTWPTR(%a6)	# incr instruction ptr
-	bsr.l		_imem_read_word		# fetch word displacement
-
-	tst.l		%d1			# ifetch error?
-	bne.l		isp_iacc		# yes
-
-	mov.w		%d0,%a0			# sign extend displacement
-
-	add.l		EXC_EXTWPTR(%a6),%a0	# pc + d16
-
-# _imem_read_word() increased the extwptr by 2. need to adjust here.
-	subq.l		&0x2,%a0		# adjust <ea>
-
-	rts
-
-##########################################################
-# PC indirect w/ index(8-bit displacement): (d8, PC, An) #
-# "     "     w/   "  (base displacement): (bd, PC, An)  #
-# PC memory indirect postindexed: ([bd, PC], Xn, od)     #
-# PC memory indirect preindexed: ([bd, PC, Xn], od)      #
-##########################################################
-pc_ind_ext:
-	mov.l		EXC_EXTWPTR(%a6),%a0	# fetch instruction addr
-	addq.l		&0x2,EXC_EXTWPTR(%a6)	# incr instruction ptr
-	bsr.l		_imem_read_word		# fetch ext word
-
-	tst.l		%d1			# ifetch error?
-	bne.l		isp_iacc		# yes
-
-	mov.l		EXC_EXTWPTR(%a6),%a0	# put base in a0
-	subq.l		&0x2,%a0		# adjust base
-
-	btst		&0x8,%d0		# is disp only 8 bits?
-	beq.b		pc_ind_index_8bit	# yes
-
-# the indexed addressing mode uses a base displacement of size
-# word or long
-	movm.l		&0x3c00,-(%sp)		# save d2-d5
-
-	mov.l		%d0,%d5			# put extword in d5
-	mov.l		%a0,%d3			# put base in d3
-
-	bra.l		calc_mem_ind		# calc memory indirect
-
-pc_ind_index_8bit:
-	mov.l		%d2,-(%sp)		# create a temp register
-
-	mov.l		%d0,%d1			# make extword copy
-	rol.w		&0x4,%d1		# rotate reg num into place
-	andi.w		&0xf,%d1		# extract register number
-
-	mov.l		(EXC_DREGS,%a6,%d1.w*4),%d1 # fetch index reg value
-
-	btst		&0xb,%d0		# is index word or long?
-	bne.b		pii8_long		# long
-	ext.l		%d1			# sign extend word index
-pii8_long:
-	mov.l		%d0,%d2			# make extword copy
-	rol.w		&0x7,%d2		# rotate scale value into place
-	andi.l		&0x3,%d2		# extract scale value
-
-	lsl.l		%d2,%d1			# shift index by scale
-
-	extb.l		%d0			# sign extend displacement
-	add.l		%d1,%d0			# index + disp
-	add.l		%d0,%a0			# An + (index + disp)
-
-	mov.l		(%sp)+,%d2		# restore temp register
-
-	rts
-
-# a5 = exc_extwptr	(global to uaeh)
-# a4 = exc_opword	(global to uaeh)
-# a3 = exc_dregs	(global to uaeh)
-
-# d2 = index		(internal "     "    )
-# d3 = base		(internal "     "    )
-# d4 = od		(internal "     "    )
-# d5 = extword		(internal "     "    )
-calc_mem_ind:
-	btst		&0x6,%d5		# is the index suppressed?
-	beq.b		calc_index
-	clr.l		%d2			# yes, so index = 0
-	bra.b		base_supp_ck
-calc_index:
-	bfextu		%d5{&16:&4},%d2
-	mov.l		(EXC_DREGS,%a6,%d2.w*4),%d2
-	btst		&0xb,%d5		# is index word or long?
-	bne.b		no_ext
-	ext.l		%d2
-no_ext:
-	bfextu		%d5{&21:&2},%d0
-	lsl.l		%d0,%d2
-base_supp_ck:
-	btst		&0x7,%d5		# is the bd suppressed?
-	beq.b		no_base_sup
-	clr.l		%d3
-no_base_sup:
-	bfextu		%d5{&26:&2},%d0	# get bd size
-#	beq.l		_error			# if (size == 0) it's reserved
-	cmpi.b		%d0,&2
-	blt.b		no_bd
-	beq.b		get_word_bd
-
-	mov.l		EXC_EXTWPTR(%a6),%a0	# fetch instruction addr
-	addq.l		&0x4,EXC_EXTWPTR(%a6)	# incr instruction ptr
-	bsr.l		_imem_read_long
-
-	tst.l		%d1			# ifetch error?
-	bne.l		isp_iacc		# yes
-
-	bra.b		chk_ind
-get_word_bd:
-	mov.l		EXC_EXTWPTR(%a6),%a0	# fetch instruction addr
-	addq.l		&0x2,EXC_EXTWPTR(%a6)	# incr instruction ptr
-	bsr.l		_imem_read_word
-
-	tst.l		%d1			# ifetch error?
-	bne.l		isp_iacc		# yes
-
-	ext.l		%d0			# sign extend bd
-
-chk_ind:
-	add.l		%d0,%d3			# base += bd
-no_bd:
-	bfextu		%d5{&30:&2},%d0		# is od suppressed?
-	beq.w		aii_bd
-	cmpi.b		%d0,&0x2
-	blt.b		null_od
-	beq.b		word_od
-
-	mov.l		EXC_EXTWPTR(%a6),%a0	# fetch instruction addr
-	addq.l		&0x4,EXC_EXTWPTR(%a6)	# incr instruction ptr
-	bsr.l		_imem_read_long
-
-	tst.l		%d1			# ifetch error?
-	bne.l		isp_iacc		# yes
-
-	bra.b		add_them
-
-word_od:
-	mov.l		EXC_EXTWPTR(%a6),%a0	# fetch instruction addr
-	addq.l		&0x2,EXC_EXTWPTR(%a6)	# incr instruction ptr
-	bsr.l		_imem_read_word
-
-	tst.l		%d1			# ifetch error?
-	bne.l		isp_iacc		# yes
-
-	ext.l		%d0			# sign extend od
-	bra.b		add_them
-
-null_od:
-	clr.l		%d0
-add_them:
-	mov.l		%d0,%d4
-	btst		&0x2,%d5		# pre or post indexing?
-	beq.b		pre_indexed
-
-	mov.l		%d3,%a0
-	bsr.l		_dmem_read_long
-
-	tst.l		%d1			# dfetch error?
-	bne.b		calc_ea_err		# yes
-
-	add.l		%d2,%d0			# <ea> += index
-	add.l		%d4,%d0			# <ea> += od
-	bra.b		done_ea
-
-pre_indexed:
-	add.l		%d2,%d3			# preindexing
-	mov.l		%d3,%a0
-	bsr.l		_dmem_read_long
-
-	tst.l		%d1			# ifetch error?
-	bne.b		calc_ea_err		# yes
-
-	add.l		%d4,%d0			# ea += od
-	bra.b		done_ea
-
-aii_bd:
-	add.l		%d2,%d3			# ea = (base + bd) + index
-	mov.l		%d3,%d0
-done_ea:
-	mov.l		%d0,%a0
-
-	movm.l		(%sp)+,&0x003c		# restore d2-d5
-	rts
-
-# if dmem_read_long() returns a fail message in d1, the package
-# must create an access error frame. here, we pass a skeleton fslw
-# and the failing address to the routine that creates the new frame.
-# FSLW:
-#	read = true
-#	size = longword
-#	TM = data
-#	software emulation error = true
-calc_ea_err:
-	mov.l		%d3,%a0			# pass failing address
-	mov.l		&0x01010001,%d0		# pass fslw
-	bra.l		isp_dacc
-
-#########################################################################
-# XDEF **************************************************************** #
-#	_moveperipheral(): routine to emulate movep instruction		#
-#									#
-# XREF **************************************************************** #
-#	_dmem_read_byte() - read byte from memory			#
-#	_dmem_write_byte() - write byte to memory			#
-#	isp_dacc() - handle data access error exception			#
-#									#
-# INPUT *************************************************************** #
-#	none								#
-#									#
-# OUTPUT ************************************************************** #
-#	If exiting through isp_dacc...					#
-#		a0 = failing address					#
-#		d0 = FSLW						#
-#	else								#
-#		none							#
-#									#
-# ALGORITHM ***********************************************************	#
-#	Decode the movep instruction words stored at EXC_OPWORD and	#
-# either read or write the required bytes from/to memory. Use the	#
-# _dmem_{read,write}_byte() routines. If one of the memory routines	#
-# returns a failing value, we must pass the failing address and	a FSLW	#
-# to the _isp_dacc() routine.						#
-#	Since this instruction is used to access peripherals, make sure	#
-# to only access the required bytes.					#
-#									#
-#########################################################################
-
-###########################
-# movep.(w,l)	Dx,(d,Ay) #
-# movep.(w,l)	(d,Ay),Dx #
-###########################
-	global		_moveperipheral
-_moveperipheral:
-	mov.w		EXC_OPWORD(%a6),%d1	# fetch the opcode word
-
-	mov.b		%d1,%d0
-	and.w		&0x7,%d0		# extract Ay from opcode word
-
-	mov.l		(EXC_AREGS,%a6,%d0.w*4),%a0 # fetch ay
-
-	add.w		EXC_EXTWORD(%a6),%a0	# add: an + sgn_ext(disp)
-
-	btst		&0x7,%d1		# (reg 2 mem) or (mem 2 reg)
-	beq.w		mem2reg
-
-# reg2mem: fetch dx, then write it to memory
-reg2mem:
-	mov.w		%d1,%d0
-	rol.w		&0x7,%d0
-	and.w		&0x7,%d0		# extract Dx from opcode word
-
-	mov.l		(EXC_DREGS,%a6,%d0.w*4), %d0 # fetch dx
-
-	btst		&0x6,%d1		# word or long operation?
-	beq.b		r2mwtrans
-
-# a0 = dst addr
-# d0 = Dx
-r2mltrans:
-	mov.l		%d0,%d2			# store data
-	mov.l		%a0,%a2			# store addr
-	rol.l		&0x8,%d2
-	mov.l		%d2,%d0
-
-	bsr.l		_dmem_write_byte	# os  : write hi
-
-	tst.l		%d1			# dfetch error?
-	bne.w		movp_write_err		# yes
-
-	add.w		&0x2,%a2		# incr addr
-	mov.l		%a2,%a0
-	rol.l		&0x8,%d2
-	mov.l		%d2,%d0
-
-	bsr.l		_dmem_write_byte	# os  : write lo
-
-	tst.l		%d1			# dfetch error?
-	bne.w		movp_write_err		# yes
-
-	add.w		&0x2,%a2		# incr addr
-	mov.l		%a2,%a0
-	rol.l		&0x8,%d2
-	mov.l		%d2,%d0
-
-	bsr.l		_dmem_write_byte	# os  : write lo
-
-	tst.l		%d1			# dfetch error?
-	bne.w		movp_write_err		# yes
-
-	add.w		&0x2,%a2		# incr addr
-	mov.l		%a2,%a0
-	rol.l		&0x8,%d2
-	mov.l		%d2,%d0
-
-	bsr.l		_dmem_write_byte	# os  : write lo
-
-	tst.l		%d1			# dfetch error?
-	bne.w		movp_write_err		# yes
-
-	rts
-
-# a0 = dst addr
-# d0 = Dx
-r2mwtrans:
-	mov.l		%d0,%d2			# store data
-	mov.l		%a0,%a2			# store addr
-	lsr.w		&0x8,%d0
-
-	bsr.l		_dmem_write_byte	# os  : write hi
-
-	tst.l		%d1			# dfetch error?
-	bne.w		movp_write_err		# yes
-
-	add.w		&0x2,%a2
-	mov.l		%a2,%a0
-	mov.l		%d2,%d0
-
-	bsr.l		_dmem_write_byte	# os  : write lo
-
-	tst.l		%d1			# dfetch error?
-	bne.w		movp_write_err		# yes
-
-	rts
-
-# mem2reg: read bytes from memory.
-# determines the dest register, and then writes the bytes into it.
-mem2reg:
-	btst		&0x6,%d1		# word or long operation?
-	beq.b		m2rwtrans
-
-# a0 = dst addr
-m2rltrans:
-	mov.l		%a0,%a2			# store addr
-
-	bsr.l		_dmem_read_byte		# read first byte
-
-	tst.l		%d1			# dfetch error?
-	bne.w		movp_read_err		# yes
-
-	mov.l		%d0,%d2
-
-	add.w		&0x2,%a2		# incr addr by 2 bytes
-	mov.l		%a2,%a0
-
-	bsr.l		_dmem_read_byte		# read second byte
-
-	tst.l		%d1			# dfetch error?
-	bne.w		movp_read_err		# yes
-
-	lsl.w		&0x8,%d2
-	mov.b		%d0,%d2			# append bytes
-
-	add.w		&0x2,%a2		# incr addr by 2 bytes
-	mov.l		%a2,%a0
-
-	bsr.l		_dmem_read_byte		# read second byte
-
-	tst.l		%d1			# dfetch error?
-	bne.w		movp_read_err		# yes
-
-	lsl.l		&0x8,%d2
-	mov.b		%d0,%d2			# append bytes
-
-	add.w		&0x2,%a2		# incr addr by 2 bytes
-	mov.l		%a2,%a0
-
-	bsr.l		_dmem_read_byte		# read second byte
-
-	tst.l		%d1			# dfetch error?
-	bne.w		movp_read_err		# yes
-
-	lsl.l		&0x8,%d2
-	mov.b		%d0,%d2			# append bytes
-
-	mov.b		EXC_OPWORD(%a6),%d1
-	lsr.b		&0x1,%d1
-	and.w		&0x7,%d1		# extract Dx from opcode word
-
-	mov.l		%d2,(EXC_DREGS,%a6,%d1.w*4) # store dx
-
-	rts
-
-# a0 = dst addr
-m2rwtrans:
-	mov.l		%a0,%a2			# store addr
-
-	bsr.l		_dmem_read_byte		# read first byte
-
-	tst.l		%d1			# dfetch error?
-	bne.w		movp_read_err		# yes
-
-	mov.l		%d0,%d2
-
-	add.w		&0x2,%a2		# incr addr by 2 bytes
-	mov.l		%a2,%a0
-
-	bsr.l		_dmem_read_byte		# read second byte
-
-	tst.l		%d1			# dfetch error?
-	bne.w		movp_read_err		# yes
-
-	lsl.w		&0x8,%d2
-	mov.b		%d0,%d2			# append bytes
-
-	mov.b		EXC_OPWORD(%a6),%d1
-	lsr.b		&0x1,%d1
-	and.w		&0x7,%d1		# extract Dx from opcode word
-
-	mov.w		%d2,(EXC_DREGS+2,%a6,%d1.w*4) # store dx
-
-	rts
-
-# if dmem_{read,write}_byte() returns a fail message in d1, the package
-# must create an access error frame. here, we pass a skeleton fslw
-# and the failing address to the routine that creates the new frame.
-# FSLW:
-#	write = true
-#	size = byte
-#	TM = data
-#	software emulation error = true
-movp_write_err:
-	mov.l		%a2,%a0			# pass failing address
-	mov.l		&0x00a10001,%d0		# pass fslw
-	bra.l		isp_dacc
-
-# FSLW:
-#	read = true
-#	size = byte
-#	TM = data
-#	software emulation error = true
-movp_read_err:
-	mov.l		%a2,%a0			# pass failing address
-	mov.l		&0x01210001,%d0		# pass fslw
-	bra.l		isp_dacc
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	_chk2_cmp2(): routine to emulate chk2/cmp2 instructions		#
-#									#
-# XREF ****************************************************************	#
-#	_calc_ea(): calculate effective address				#
-#	_dmem_read_long(): read operands				#
-#	_dmem_read_word(): read operands				#
-#	isp_dacc(): handle data access error exception			#
-#									#
-# INPUT ***************************************************************	#
-#	none								#
-#									#
-# OUTPUT **************************************************************	#
-#	If exiting through isp_dacc...					#
-#		a0 = failing address					#
-#		d0 = FSLW						#
-#	else								#
-#		none							#
-#									#
-# ALGORITHM ***********************************************************	#
-#	First, calculate the effective address, then fetch the byte,	#
-# word, or longword sized operands. Then, in the interest of		#
-# simplicity, all operands are converted to longword size whether the	#
-# operation is byte, word, or long. The bounds are sign extended	#
-# accordingly. If Rn is a data regsiter, Rn is also sign extended. If	#
-# Rn is an address register, it need not be sign extended since the	#
-# full register is always used.						#
-#	The comparisons are made and the condition codes calculated.	#
-# If the instruction is chk2 and the Rn value is out-of-bounds, set	#
-# the ichk_flg in SPCOND_FLG.						#
-#	If the memory fetch returns a failing value, pass the failing	#
-# address and FSLW to the isp_dacc() routine.				#
-#									#
-#########################################################################
-
-	global		_chk2_cmp2
-_chk2_cmp2:
-
-# passing size parameter doesn't matter since chk2 & cmp2 can't do
-# either predecrement, postincrement, or immediate.
-	bsr.l		_calc_ea		# calculate <ea>
-
-	mov.b		EXC_EXTWORD(%a6), %d0	# fetch hi extension word
-	rol.b		&0x4, %d0		# rotate reg bits into lo
-	and.w		&0xf, %d0		# extract reg bits
-
-	mov.l		(EXC_DREGS,%a6,%d0.w*4), %d2 # get regval
-
-	cmpi.b		EXC_OPWORD(%a6), &0x2	# what size is operation?
-	blt.b		chk2_cmp2_byte		# size == byte
-	beq.b		chk2_cmp2_word		# size == word
-
-# the bounds are longword size. call routine to read the lower
-# bound into d0 and the higher bound into d1.
-chk2_cmp2_long:
-	mov.l		%a0,%a2			# save copy of <ea>
-	bsr.l		_dmem_read_long		# fetch long lower bound
-
-	tst.l		%d1			# dfetch error?
-	bne.w		chk2_cmp2_err_l		# yes
-
-	mov.l		%d0,%d3			# save long lower bound
-	addq.l		&0x4,%a2
-	mov.l		%a2,%a0			# pass <ea> of long upper bound
-	bsr.l		_dmem_read_long		# fetch long upper bound
-
-	tst.l		%d1			# dfetch error?
-	bne.w		chk2_cmp2_err_l		# yes
-
-	mov.l		%d0,%d1			# long upper bound in d1
-	mov.l		%d3,%d0			# long lower bound in d0
-	bra.w		chk2_cmp2_compare	# go do the compare emulation
-
-# the bounds are word size. fetch them in one subroutine call by
-# reading a longword. sign extend both. if it's a data operation,
-# sign extend Rn to long, also.
-chk2_cmp2_word:
-	mov.l		%a0,%a2
-	bsr.l		_dmem_read_long		# fetch 2 word bounds
-
-	tst.l		%d1			# dfetch error?
-	bne.w		chk2_cmp2_err_l		# yes
-
-	mov.w		%d0, %d1		# place hi in %d1
-	swap		%d0			# place lo in %d0
-
-	ext.l		%d0			# sign extend lo bnd
-	ext.l		%d1			# sign extend hi bnd
-
-	btst		&0x7, EXC_EXTWORD(%a6)	# address compare?
-	bne.w		chk2_cmp2_compare	# yes; don't sign extend
-
-# operation is a data register compare.
-# sign extend word to long so we can do simple longword compares.
-	ext.l		%d2			# sign extend data word
-	bra.w		chk2_cmp2_compare	# go emulate compare
-
-# the bounds are byte size. fetch them in one subroutine call by
-# reading a word. sign extend both. if it's a data operation,
-# sign extend Rn to long, also.
-chk2_cmp2_byte:
-	mov.l		%a0,%a2
-	bsr.l		_dmem_read_word		# fetch 2 byte bounds
-
-	tst.l		%d1			# dfetch error?
-	bne.w		chk2_cmp2_err_w		# yes
-
-	mov.b		%d0, %d1		# place hi in %d1
-	lsr.w		&0x8, %d0		# place lo in %d0
-
-	extb.l		%d0			# sign extend lo bnd
-	extb.l		%d1			# sign extend hi bnd
-
-	btst		&0x7, EXC_EXTWORD(%a6)	# address compare?
-	bne.b		chk2_cmp2_compare	# yes; don't sign extend
-
-# operation is a data register compare.
-# sign extend byte to long so we can do simple longword compares.
-	extb.l		%d2			# sign extend data byte
-
-#
-# To set the ccodes correctly:
-#	(1) save 'Z' bit from (Rn - lo)
-#	(2) save 'Z' and 'N' bits from ((hi - lo) - (Rn - hi))
-#	(3) keep 'X', 'N', and 'V' from before instruction
-#	(4) combine ccodes
-#
-chk2_cmp2_compare:
-	sub.l		%d0, %d2		# (Rn - lo)
-	mov.w		%cc, %d3		# fetch resulting ccodes
-	andi.b		&0x4, %d3		# keep 'Z' bit
-	sub.l		%d0, %d1		# (hi - lo)
-	cmp.l		%d1,%d2			# ((hi - lo) - (Rn - hi))
-
-	mov.w		%cc, %d4		# fetch resulting ccodes
-	or.b		%d4, %d3		# combine w/ earlier ccodes
-	andi.b		&0x5, %d3		# keep 'Z' and 'N'
-
-	mov.w		EXC_CC(%a6), %d4	# fetch old ccodes
-	andi.b		&0x1a, %d4		# keep 'X','N','V' bits
-	or.b		%d3, %d4		# insert new ccodes
-	mov.w		%d4, EXC_CC(%a6)	# save new ccodes
-
-	btst		&0x3, EXC_EXTWORD(%a6)	# separate chk2,cmp2
-	bne.b		chk2_finish		# it's a chk2
-
-	rts
-
-# this code handles the only difference between chk2 and cmp2. chk2 would
-# have trapped out if the value was out of bounds. we check this by seeing
-# if the 'N' bit was set by the operation.
-chk2_finish:
-	btst		&0x0, %d4		# is 'N' bit set?
-	bne.b		chk2_trap		# yes;chk2 should trap
-	rts
-chk2_trap:
-	mov.b		&ichk_flg,SPCOND_FLG(%a6) # set "special case" flag
-	rts
-
-# if dmem_read_{long,word}() returns a fail message in d1, the package
-# must create an access error frame. here, we pass a skeleton fslw
-# and the failing address to the routine that creates the new frame.
-# FSLW:
-#	read = true
-#	size = longword
-#	TM = data
-#	software emulation error = true
-chk2_cmp2_err_l:
-	mov.l		%a2,%a0			# pass failing address
-	mov.l		&0x01010001,%d0		# pass fslw
-	bra.l		isp_dacc
-
-# FSLW:
-#	read = true
-#	size = word
-#	TM = data
-#	software emulation error = true
-chk2_cmp2_err_w:
-	mov.l		%a2,%a0			# pass failing address
-	mov.l		&0x01410001,%d0		# pass fslw
-	bra.l		isp_dacc
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	_div64(): routine to emulate div{u,s}.l <ea>,Dr:Dq		#
-#							64/32->32r:32q	#
-#									#
-# XREF ****************************************************************	#
-#	_calc_ea() - calculate effective address			#
-#	isp_iacc() - handle instruction access error exception		#
-#	isp_dacc() - handle data access error exception			#
-#	isp_restore() - restore An on access error w/ -() or ()+	#
-#									#
-# INPUT ***************************************************************	#
-#	none								#
-#									#
-# OUTPUT **************************************************************	#
-#	If exiting through isp_dacc...					#
-#		a0 = failing address					#
-#		d0 = FSLW						#
-#	else								#
-#		none							#
-#									#
-# ALGORITHM ***********************************************************	#
-#	First, decode the operand location. If it's in Dn, fetch from	#
-# the stack. If it's in memory, use _calc_ea() to calculate the		#
-# effective address. Use _dmem_read_long() to fetch at that address.	#
-# Unless the operand is immediate data. Then use _imem_read_long().	#
-# Send failures to isp_dacc() or isp_iacc() as appropriate.		#
-#	If the operands are signed, make them unsigned and save	the	#
-# sign info for later. Separate out special cases like divide-by-zero	#
-# or 32-bit divides if possible. Else, use a special math algorithm	#
-# to calculate the result.						#
-#	Restore sign info if signed instruction. Set the condition	#
-# codes. Set idbyz_flg in SPCOND_FLG if divisor was zero. Store the	#
-# quotient and remainder in the appropriate data registers on the stack.#
-#									#
-#########################################################################
-
-set	NDIVISOR,	EXC_TEMP+0x0
-set	NDIVIDEND,	EXC_TEMP+0x1
-set	NDRSAVE,	EXC_TEMP+0x2
-set	NDQSAVE,	EXC_TEMP+0x4
-set	DDSECOND,	EXC_TEMP+0x6
-set	DDQUOTIENT,	EXC_TEMP+0x8
-set	DDNORMAL,	EXC_TEMP+0xc
-
-	global		_div64
-#############
-# div(u,s)l #
-#############
-_div64:
-	mov.b		EXC_OPWORD+1(%a6), %d0
-	andi.b		&0x38, %d0		# extract src mode
-
-	bne.w		dcontrolmodel_s		# %dn dest or control mode?
-
-	mov.b		EXC_OPWORD+1(%a6), %d0	# extract Dn from opcode
-	andi.w		&0x7, %d0
-	mov.l		(EXC_DREGS,%a6,%d0.w*4), %d7 # fetch divisor from register
-
-dgotsrcl:
-	beq.w		div64eq0		# divisor is = 0!!!
-
-	mov.b		EXC_EXTWORD+1(%a6), %d0	# extract Dr from extword
-	mov.b		EXC_EXTWORD(%a6), %d1	# extract Dq from extword
-	and.w		&0x7, %d0
-	lsr.b		&0x4, %d1
-	and.w		&0x7, %d1
-	mov.w		%d0, NDRSAVE(%a6)	# save Dr for later
-	mov.w		%d1, NDQSAVE(%a6)	# save Dq for later
-
-# fetch %dr and %dq directly off stack since all regs are saved there
-	mov.l		(EXC_DREGS,%a6,%d0.w*4), %d5 # get dividend hi
-	mov.l		(EXC_DREGS,%a6,%d1.w*4), %d6 # get dividend lo
-
-# separate signed and unsigned divide
-	btst		&0x3, EXC_EXTWORD(%a6)	# signed or unsigned?
-	beq.b		dspecialcases		# use positive divide
-
-# save the sign of the divisor
-# make divisor unsigned if it's negative
-	tst.l		%d7			# chk sign of divisor
-	slt		NDIVISOR(%a6)		# save sign of divisor
-	bpl.b		dsgndividend
-	neg.l		%d7			# complement negative divisor
-
-# save the sign of the dividend
-# make dividend unsigned if it's negative
-dsgndividend:
-	tst.l		%d5			# chk sign of hi(dividend)
-	slt		NDIVIDEND(%a6)		# save sign of dividend
-	bpl.b		dspecialcases
-
-	mov.w		&0x0, %cc		# clear 'X' cc bit
-	negx.l		%d6			# complement signed dividend
-	negx.l		%d5
-
-# extract some special cases:
-#	- is (dividend == 0) ?
-#	- is (hi(dividend) == 0 && (divisor <= lo(dividend))) ? (32-bit div)
-dspecialcases:
-	tst.l		%d5			# is (hi(dividend) == 0)
-	bne.b		dnormaldivide		# no, so try it the long way
-
-	tst.l		%d6			# is (lo(dividend) == 0), too
-	beq.w		ddone			# yes, so (dividend == 0)
-
-	cmp.l		%d7,%d6			# is (divisor <= lo(dividend))
-	bls.b		d32bitdivide		# yes, so use 32 bit divide
-
-	exg		%d5,%d6			# q = 0, r = dividend
-	bra.w		divfinish		# can't divide, we're done.
-
-d32bitdivide:
-	tdivu.l		%d7, %d5:%d6		# it's only a 32/32 bit div!
-
-	bra.b		divfinish
-
-dnormaldivide:
-# last special case:
-#	- is hi(dividend) >= divisor ? if yes, then overflow
-	cmp.l		%d7,%d5
-	bls.b		ddovf			# answer won't fit in 32 bits
-
-# perform the divide algorithm:
-	bsr.l		dclassical		# do int divide
-
-# separate into signed and unsigned finishes.
-divfinish:
-	btst		&0x3, EXC_EXTWORD(%a6)	# do divs, divu separately
-	beq.b		ddone			# divu has no processing!!!
-
-# it was a divs.l, so ccode setting is a little more complicated...
-	tst.b		NDIVIDEND(%a6)		# remainder has same sign
-	beq.b		dcc			# as dividend.
-	neg.l		%d5			# sgn(rem) = sgn(dividend)
-dcc:
-	mov.b		NDIVISOR(%a6), %d0
-	eor.b		%d0, NDIVIDEND(%a6)	# chk if quotient is negative
-	beq.b		dqpos			# branch to quot positive
-
-# 0x80000000 is the largest number representable as a 32-bit negative
-# number. the negative of 0x80000000 is 0x80000000.
-	cmpi.l		%d6, &0x80000000	# will (-quot) fit in 32 bits?
-	bhi.b		ddovf
-
-	neg.l		%d6			# make (-quot) 2's comp
-
-	bra.b		ddone
-
-dqpos:
-	btst		&0x1f, %d6		# will (+quot) fit in 32 bits?
-	bne.b		ddovf
-
-ddone:
-# at this point, result is normal so ccodes are set based on result.
-	mov.w		EXC_CC(%a6), %cc
-	tst.l		%d6			# set %ccode bits
-	mov.w		%cc, EXC_CC(%a6)
-
-	mov.w		NDRSAVE(%a6), %d0	# get Dr off stack
-	mov.w		NDQSAVE(%a6), %d1	# get Dq off stack
-
-# if the register numbers are the same, only the quotient gets saved.
-# so, if we always save the quotient second, we save ourselves a cmp&beq
-	mov.l		%d5, (EXC_DREGS,%a6,%d0.w*4) # save remainder
-	mov.l		%d6, (EXC_DREGS,%a6,%d1.w*4) # save quotient
-
-	rts
-
-ddovf:
-	bset		&0x1, EXC_CC+1(%a6)	# 'V' set on overflow
-	bclr		&0x0, EXC_CC+1(%a6)	# 'C' cleared on overflow
-
-	rts
-
-div64eq0:
-	andi.b		&0x1e, EXC_CC+1(%a6)	# clear 'C' bit on divbyzero
-	ori.b		&idbyz_flg,SPCOND_FLG(%a6) # set "special case" flag
-	rts
-
-###########################################################################
-#########################################################################
-# This routine uses the 'classical' Algorithm D from Donald Knuth's	#
-# Art of Computer Programming, vol II, Seminumerical Algorithms.	#
-# For this implementation b=2**16, and the target is U1U2U3U4/V1V2,	#
-# where U,V are words of the quadword dividend and longword divisor,	#
-# and U1, V1 are the most significant words.				#
-#									#
-# The most sig. longword of the 64 bit dividend must be in %d5, least	#
-# in %d6. The divisor must be in the variable ddivisor, and the		#
-# signed/unsigned flag ddusign must be set (0=unsigned,1=signed).	#
-# The quotient is returned in %d6, remainder in %d5, unless the		#
-# v (overflow) bit is set in the saved %ccr. If overflow, the dividend	#
-# is unchanged.								#
-#########################################################################
-dclassical:
-# if the divisor msw is 0, use simpler algorithm then the full blown
-# one at ddknuth:
-
-	cmpi.l		%d7, &0xffff
-	bhi.b		ddknuth			# go use D. Knuth algorithm
-
-# Since the divisor is only a word (and larger than the mslw of the dividend),
-# a simpler algorithm may be used :
-# In the general case, four quotient words would be created by
-# dividing the divisor word into each dividend word. In this case,
-# the first two quotient words must be zero, or overflow would occur.
-# Since we already checked this case above, we can treat the most significant
-# longword of the dividend as (0) remainder (see Knuth) and merely complete
-# the last two divisions to get a quotient longword and word remainder:
-
-	clr.l		%d1
-	swap		%d5			# same as r*b if previous step rqd
-	swap		%d6			# get u3 to lsw position
-	mov.w		%d6, %d5		# rb + u3
-
-	divu.w		%d7, %d5
-
-	mov.w		%d5, %d1		# first quotient word
-	swap		%d6			# get u4
-	mov.w		%d6, %d5		# rb + u4
-
-	divu.w		%d7, %d5
-
-	swap		%d1
-	mov.w		%d5, %d1		# 2nd quotient 'digit'
-	clr.w		%d5
-	swap		%d5			# now remainder
-	mov.l		%d1, %d6		# and quotient
-
-	rts
-
-ddknuth:
-# In this algorithm, the divisor is treated as a 2 digit (word) number
-# which is divided into a 3 digit (word) dividend to get one quotient
-# digit (word). After subtraction, the dividend is shifted and the
-# process repeated. Before beginning, the divisor and quotient are
-# 'normalized' so that the process of estimating the quotient digit
-# will yield verifiably correct results..
-
-	clr.l		DDNORMAL(%a6)		# count of shifts for normalization
-	clr.b		DDSECOND(%a6)		# clear flag for quotient digits
-	clr.l		%d1			# %d1 will hold trial quotient
-ddnchk:
-	btst		&31, %d7		# must we normalize? first word of
-	bne.b		ddnormalized		# divisor (V1) must be >= 65536/2
-	addq.l		&0x1, DDNORMAL(%a6)	# count normalization shifts
-	lsl.l		&0x1, %d7		# shift the divisor
-	lsl.l		&0x1, %d6		# shift u4,u3 with overflow to u2
-	roxl.l		&0x1, %d5		# shift u1,u2
-	bra.w		ddnchk
-ddnormalized:
-
-# Now calculate an estimate of the quotient words (msw first, then lsw).
-# The comments use subscripts for the first quotient digit determination.
-	mov.l		%d7, %d3		# divisor
-	mov.l		%d5, %d2		# dividend mslw
-	swap		%d2
-	swap		%d3
-	cmp.w		%d2, %d3		# V1 = U1 ?
-	bne.b		ddqcalc1
-	mov.w		&0xffff, %d1		# use max trial quotient word
-	bra.b		ddadj0
-ddqcalc1:
-	mov.l		%d5, %d1
-
-	divu.w		%d3, %d1		# use quotient of mslw/msw
-
-	andi.l		&0x0000ffff, %d1	# zero any remainder
-ddadj0:
-
-# now test the trial quotient and adjust. This step plus the
-# normalization assures (according to Knuth) that the trial
-# quotient will be at worst 1 too large.
-	mov.l		%d6, -(%sp)
-	clr.w		%d6			# word u3 left
-	swap		%d6			# in lsw position
-ddadj1: mov.l		%d7, %d3
-	mov.l		%d1, %d2
-	mulu.w		%d7, %d2		# V2q
-	swap		%d3
-	mulu.w		%d1, %d3		# V1q
-	mov.l		%d5, %d4		# U1U2
-	sub.l		%d3, %d4		# U1U2 - V1q
-
-	swap		%d4
-
-	mov.w		%d4,%d0
-	mov.w		%d6,%d4			# insert lower word (U3)
-
-	tst.w		%d0			# is upper word set?
-	bne.w		ddadjd1
-
-#	add.l		%d6, %d4		# (U1U2 - V1q) + U3
-
-	cmp.l		%d2, %d4
-	bls.b		ddadjd1			# is V2q > (U1U2-V1q) + U3 ?
-	subq.l		&0x1, %d1		# yes, decrement and recheck
-	bra.b		ddadj1
-ddadjd1:
-# now test the word by multiplying it by the divisor (V1V2) and comparing
-# the 3 digit (word) result with the current dividend words
-	mov.l		%d5, -(%sp)		# save %d5 (%d6 already saved)
-	mov.l		%d1, %d6
-	swap		%d6			# shift answer to ms 3 words
-	mov.l		%d7, %d5
-	bsr.l		dmm2
-	mov.l		%d5, %d2		# now %d2,%d3 are trial*divisor
-	mov.l		%d6, %d3
-	mov.l		(%sp)+, %d5		# restore dividend
-	mov.l		(%sp)+, %d6
-	sub.l		%d3, %d6
-	subx.l		%d2, %d5		# subtract double precision
-	bcc		dd2nd			# no carry, do next quotient digit
-	subq.l		&0x1, %d1		# q is one too large
-# need to add back divisor longword to current ms 3 digits of dividend
-# - according to Knuth, this is done only 2 out of 65536 times for random
-# divisor, dividend selection.
-	clr.l		%d2
-	mov.l		%d7, %d3
-	swap		%d3
-	clr.w		%d3			# %d3 now ls word of divisor
-	add.l		%d3, %d6		# aligned with 3rd word of dividend
-	addx.l		%d2, %d5
-	mov.l		%d7, %d3
-	clr.w		%d3			# %d3 now ms word of divisor
-	swap		%d3			# aligned with 2nd word of dividend
-	add.l		%d3, %d5
-dd2nd:
-	tst.b		DDSECOND(%a6)		# both q words done?
-	bne.b		ddremain
-# first quotient digit now correct. store digit and shift the
-# (subtracted) dividend
-	mov.w		%d1, DDQUOTIENT(%a6)
-	clr.l		%d1
-	swap		%d5
-	swap		%d6
-	mov.w		%d6, %d5
-	clr.w		%d6
-	st		DDSECOND(%a6)		# second digit
-	bra.w		ddnormalized
-ddremain:
-# add 2nd word to quotient, get the remainder.
-	mov.w		%d1, DDQUOTIENT+2(%a6)
-# shift down one word/digit to renormalize remainder.
-	mov.w		%d5, %d6
-	swap		%d6
-	swap		%d5
-	mov.l		DDNORMAL(%a6), %d7	# get norm shift count
-	beq.b		ddrn
-	subq.l		&0x1, %d7		# set for loop count
-ddnlp:
-	lsr.l		&0x1, %d5		# shift into %d6
-	roxr.l		&0x1, %d6
-	dbf		%d7, ddnlp
-ddrn:
-	mov.l		%d6, %d5		# remainder
-	mov.l		DDQUOTIENT(%a6), %d6	# quotient
-
-	rts
-dmm2:
-# factors for the 32X32->64 multiplication are in %d5 and %d6.
-# returns 64 bit result in %d5 (hi) %d6(lo).
-# destroys %d2,%d3,%d4.
-
-# multiply hi,lo words of each factor to get 4 intermediate products
-	mov.l		%d6, %d2
-	mov.l		%d6, %d3
-	mov.l		%d5, %d4
-	swap		%d3
-	swap		%d4
-	mulu.w		%d5, %d6		# %d6 <- lsw*lsw
-	mulu.w		%d3, %d5		# %d5 <- msw-dest*lsw-source
-	mulu.w		%d4, %d2		# %d2 <- msw-source*lsw-dest
-	mulu.w		%d4, %d3		# %d3 <- msw*msw
-# now use swap and addx to consolidate to two longwords
-	clr.l		%d4
-	swap		%d6
-	add.w		%d5, %d6		# add msw of l*l to lsw of m*l product
-	addx.w		%d4, %d3		# add any carry to m*m product
-	add.w		%d2, %d6		# add in lsw of other m*l product
-	addx.w		%d4, %d3		# add any carry to m*m product
-	swap		%d6			# %d6 is low 32 bits of final product
-	clr.w		%d5
-	clr.w		%d2			# lsw of two mixed products used,
-	swap		%d5			# now use msws of longwords
-	swap		%d2
-	add.l		%d2, %d5
-	add.l		%d3, %d5		# %d5 now ms 32 bits of final product
-	rts
-
-##########
-dcontrolmodel_s:
-	movq.l		&LONG,%d0
-	bsr.l		_calc_ea		# calc <ea>
-
-	cmpi.b		SPCOND_FLG(%a6),&immed_flg # immediate addressing mode?
-	beq.b		dimmed			# yes
-
-	mov.l		%a0,%a2
-	bsr.l		_dmem_read_long		# fetch divisor from <ea>
-
-	tst.l		%d1			# dfetch error?
-	bne.b		div64_err		# yes
-
-	mov.l		%d0, %d7
-	bra.w		dgotsrcl
-
-# we have to split out immediate data here because it must be read using
-# imem_read() instead of dmem_read(). this becomes especially important
-# if the fetch runs into some deadly fault.
-dimmed:
-	addq.l		&0x4,EXC_EXTWPTR(%a6)
-	bsr.l		_imem_read_long		# read immediate value
-
-	tst.l		%d1			# ifetch error?
-	bne.l		isp_iacc		# yes
-
-	mov.l		%d0,%d7
-	bra.w		dgotsrcl
-
-##########
-
-# if dmem_read_long() returns a fail message in d1, the package
-# must create an access error frame. here, we pass a skeleton fslw
-# and the failing address to the routine that creates the new frame.
-# also, we call isp_restore in case the effective addressing mode was
-# (an)+ or -(an) in which case the previous "an" value must be restored.
-# FSLW:
-#	read = true
-#	size = longword
-#	TM = data
-#	software emulation error = true
-div64_err:
-	bsr.l		isp_restore		# restore addr reg
-	mov.l		%a2,%a0			# pass failing address
-	mov.l		&0x01010001,%d0		# pass fslw
-	bra.l		isp_dacc
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	_mul64(): routine to emulate mul{u,s}.l <ea>,Dh:Dl 32x32->64	#
-#									#
-# XREF ****************************************************************	#
-#	_calc_ea() - calculate effective address			#
-#	isp_iacc() - handle instruction access error exception		#
-#	isp_dacc() - handle data access error exception			#
-#	isp_restore() - restore An on access error w/ -() or ()+	#
-#									#
-# INPUT ***************************************************************	#
-#	none								#
-#									#
-# OUTPUT **************************************************************	#
-#	If exiting through isp_dacc...					#
-#		a0 = failing address					#
-#		d0 = FSLW						#
-#	else								#
-#		none							#
-#									#
-# ALGORITHM ***********************************************************	#
-#	First, decode the operand location. If it's in Dn, fetch from	#
-# the stack. If it's in memory, use _calc_ea() to calculate the		#
-# effective address. Use _dmem_read_long() to fetch at that address.	#
-# Unless the operand is immediate data. Then use _imem_read_long().	#
-# Send failures to isp_dacc() or isp_iacc() as appropriate.		#
-#	If the operands are signed, make them unsigned and save the	#
-# sign info for later. Perform the multiplication using 16x16->32	#
-# unsigned multiplies and "add" instructions. Store the high and low	#
-# portions of the result in the appropriate data registers on the	#
-# stack. Calculate the condition codes, also.				#
-#									#
-#########################################################################
-
-#############
-# mul(u,s)l #
-#############
-	global		_mul64
-_mul64:
-	mov.b		EXC_OPWORD+1(%a6), %d0	# extract src {mode,reg}
-	cmpi.b		%d0, &0x7		# is src mode Dn or other?
-	bgt.w		mul64_memop		# src is in memory
-
-# multiplier operand in the data register file.
-# must extract the register number and fetch the operand from the stack.
-mul64_regop:
-	andi.w		&0x7, %d0		# extract Dn
-	mov.l		(EXC_DREGS,%a6,%d0.w*4), %d3 # fetch multiplier
-
-# multiplier is in %d3. now, extract Dl and Dh fields and fetch the
-# multiplicand from the data register specified by Dl.
-mul64_multiplicand:
-	mov.w		EXC_EXTWORD(%a6), %d2	# fetch ext word
-	clr.w		%d1			# clear Dh reg
-	mov.b		%d2, %d1		# grab Dh
-	rol.w		&0x4, %d2		# align Dl byte
-	andi.w		&0x7, %d2		# extract Dl
-
-	mov.l		(EXC_DREGS,%a6,%d2.w*4), %d4 # get multiplicand
-
-# check for the case of "zero" result early
-	tst.l		%d4			# test multiplicand
-	beq.w		mul64_zero		# handle zero separately
-	tst.l		%d3			# test multiplier
-	beq.w		mul64_zero		# handle zero separately
-
-# multiplier is in %d3 and multiplicand is in %d4.
-# if the operation is to be signed, then the operands are converted
-# to unsigned and the result sign is saved for the end.
-	clr.b		EXC_TEMP(%a6)		# clear temp space
-	btst		&0x3, EXC_EXTWORD(%a6)	# signed or unsigned?
-	beq.b		mul64_alg		# unsigned; skip sgn calc
-
-	tst.l		%d3			# is multiplier negative?
-	bge.b		mul64_chk_md_sgn	# no
-	neg.l		%d3			# make multiplier positive
-	ori.b		&0x1, EXC_TEMP(%a6)	# save multiplier sgn
-
-# the result sign is the exclusive or of the operand sign bits.
-mul64_chk_md_sgn:
-	tst.l		%d4			# is multiplicand negative?
-	bge.b		mul64_alg		# no
-	neg.l		%d4			# make multiplicand positive
-	eori.b		&0x1, EXC_TEMP(%a6)	# calculate correct sign
-
-#########################################################################
-#	63			   32				0	#
-#	----------------------------					#
-#	| hi(mplier) * hi(mplicand)|					#
-#	----------------------------					#
-#		     -----------------------------			#
-#		     | hi(mplier) * lo(mplicand) |			#
-#		     -----------------------------			#
-#		     -----------------------------			#
-#		     | lo(mplier) * hi(mplicand) |			#
-#		     -----------------------------			#
-#	  |			   -----------------------------	#
-#	--|--			   | lo(mplier) * lo(mplicand) |	#
-#	  |			   -----------------------------	#
-#	========================================================	#
-#	--------------------------------------------------------	#
-#	|	hi(result)	   |	    lo(result)         |	#
-#	--------------------------------------------------------	#
-#########################################################################
-mul64_alg:
-# load temp registers with operands
-	mov.l		%d3, %d5		# mr in %d5
-	mov.l		%d3, %d6		# mr in %d6
-	mov.l		%d4, %d7		# md in %d7
-	swap		%d6			# hi(mr) in lo %d6
-	swap		%d7			# hi(md) in lo %d7
-
-# complete necessary multiplies:
-	mulu.w		%d4, %d3		# [1] lo(mr) * lo(md)
-	mulu.w		%d6, %d4		# [2] hi(mr) * lo(md)
-	mulu.w		%d7, %d5		# [3] lo(mr) * hi(md)
-	mulu.w		%d7, %d6		# [4] hi(mr) * hi(md)
-
-# add lo portions of [2],[3] to hi portion of [1].
-# add carries produced from these adds to [4].
-# lo([1]) is the final lo 16 bits of the result.
-	clr.l		%d7			# load %d7 w/ zero value
-	swap		%d3			# hi([1]) <==> lo([1])
-	add.w		%d4, %d3		# hi([1]) + lo([2])
-	addx.l		%d7, %d6		#    [4]  + carry
-	add.w		%d5, %d3		# hi([1]) + lo([3])
-	addx.l		%d7, %d6		#    [4]  + carry
-	swap		%d3			# lo([1]) <==> hi([1])
-
-# lo portions of [2],[3] have been added in to final result.
-# now, clear lo, put hi in lo reg, and add to [4]
-	clr.w		%d4			# clear lo([2])
-	clr.w		%d5			# clear hi([3])
-	swap		%d4			# hi([2]) in lo %d4
-	swap		%d5			# hi([3]) in lo %d5
-	add.l		%d5, %d4		#    [4]  + hi([2])
-	add.l		%d6, %d4		#    [4]  + hi([3])
-
-# unsigned result is now in {%d4,%d3}
-	tst.b		EXC_TEMP(%a6)		# should result be signed?
-	beq.b		mul64_done		# no
-
-# result should be a signed negative number.
-# compute 2's complement of the unsigned number:
-#   -negate all bits and add 1
-mul64_neg:
-	not.l		%d3			# negate lo(result) bits
-	not.l		%d4			# negate hi(result) bits
-	addq.l		&1, %d3			# add 1 to lo(result)
-	addx.l		%d7, %d4		# add carry to hi(result)
-
-# the result is saved to the register file.
-# for '040 compatibility, if Dl == Dh then only the hi(result) is
-# saved. so, saving hi after lo accomplishes this without need to
-# check Dl,Dh equality.
-mul64_done:
-	mov.l		%d3, (EXC_DREGS,%a6,%d2.w*4) # save lo(result)
-	mov.w		&0x0, %cc
-	mov.l		%d4, (EXC_DREGS,%a6,%d1.w*4) # save hi(result)
-
-# now, grab the condition codes. only one that can be set is 'N'.
-# 'N' CAN be set if the operation is unsigned if bit 63 is set.
-	mov.w		%cc, %d7		# fetch %ccr to see if 'N' set
-	andi.b		&0x8, %d7		# extract 'N' bit
-
-mul64_ccode_set:
-	mov.b		EXC_CC+1(%a6), %d6	# fetch previous %ccr
-	andi.b		&0x10, %d6		# all but 'X' bit changes
-
-	or.b		%d7, %d6		# group 'X' and 'N'
-	mov.b		%d6, EXC_CC+1(%a6)	# save new %ccr
-
-	rts
-
-# one or both of the operands is zero so the result is also zero.
-# save the zero result to the register file and set the 'Z' ccode bit.
-mul64_zero:
-	clr.l		(EXC_DREGS,%a6,%d2.w*4) # save lo(result)
-	clr.l		(EXC_DREGS,%a6,%d1.w*4) # save hi(result)
-
-	movq.l		&0x4, %d7		# set 'Z' ccode bit
-	bra.b		mul64_ccode_set		# finish ccode set
-
-##########
-
-# multiplier operand is in memory at the effective address.
-# must calculate the <ea> and go fetch the 32-bit operand.
-mul64_memop:
-	movq.l		&LONG, %d0		# pass # of bytes
-	bsr.l		_calc_ea		# calculate <ea>
-
-	cmpi.b		SPCOND_FLG(%a6),&immed_flg # immediate addressing mode?
-	beq.b		mul64_immed		# yes
-
-	mov.l		%a0,%a2
-	bsr.l		_dmem_read_long		# fetch src from addr (%a0)
-
-	tst.l		%d1			# dfetch error?
-	bne.w		mul64_err		# yes
-
-	mov.l		%d0, %d3		# store multiplier in %d3
-
-	bra.w		mul64_multiplicand
-
-# we have to split out immediate data here because it must be read using
-# imem_read() instead of dmem_read(). this becomes especially important
-# if the fetch runs into some deadly fault.
-mul64_immed:
-	addq.l		&0x4,EXC_EXTWPTR(%a6)
-	bsr.l		_imem_read_long		# read immediate value
-
-	tst.l		%d1			# ifetch error?
-	bne.l		isp_iacc		# yes
-
-	mov.l		%d0,%d3
-	bra.w		mul64_multiplicand
-
-##########
-
-# if dmem_read_long() returns a fail message in d1, the package
-# must create an access error frame. here, we pass a skeleton fslw
-# and the failing address to the routine that creates the new frame.
-# also, we call isp_restore in case the effective addressing mode was
-# (an)+ or -(an) in which case the previous "an" value must be restored.
-# FSLW:
-#	read = true
-#	size = longword
-#	TM = data
-#	software emulation error = true
-mul64_err:
-	bsr.l		isp_restore		# restore addr reg
-	mov.l		%a2,%a0			# pass failing address
-	mov.l		&0x01010001,%d0		# pass fslw
-	bra.l		isp_dacc
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	_compandset2(): routine to emulate cas2()			#
-#			(internal to package)				#
-#									#
-#	_isp_cas2_finish(): store ccodes, store compare regs		#
-#			    (external to package)			#
-#									#
-# XREF ****************************************************************	#
-#	_real_lock_page() - "callout" to lock op's page from page-outs	#
-#	_cas_terminate2() - access error exit				#
-#	_real_cas2() - "callout" to core cas2 emulation code		#
-#	_real_unlock_page() - "callout" to unlock page			#
-#									#
-# INPUT ***************************************************************	#
-# _compandset2():							#
-#	d0 = instruction extension word					#
-#									#
-# _isp_cas2_finish():							#
-#	see cas2 core emulation code					#
-#									#
-# OUTPUT **************************************************************	#
-# _compandset2():							#
-#	see cas2 core emulation code					#
-#									#
-# _isp_cas_finish():							#
-#	None (register file or memroy changed as appropriate)		#
-#									#
-# ALGORITHM ***********************************************************	#
-# compandset2():							#
-#	Decode the instruction and fetch the appropriate Update and	#
-# Compare operands. Then call the "callout" _real_lock_page() for each	#
-# memory operand address so that the operating system can keep these	#
-# pages from being paged out. If either _real_lock_page() fails, exit	#
-# through _cas_terminate2(). Don't forget to unlock the 1st locked page	#
-# using _real_unlock_paged() if the 2nd lock-page fails.		#
-# Finally, branch to the core cas2 emulation code by calling the	#
-# "callout" _real_cas2().						#
-#									#
-# _isp_cas2_finish():							#
-#	Re-perform the comparison so we can determine the condition	#
-# codes which were too much trouble to keep around during the locked	#
-# emulation. Then unlock each operands page by calling the "callout"	#
-# _real_unlock_page().							#
-#									#
-#########################################################################
-
-set ADDR1,	EXC_TEMP+0xc
-set ADDR2,	EXC_TEMP+0x0
-set DC2,	EXC_TEMP+0xa
-set DC1,	EXC_TEMP+0x8
-
-	global		_compandset2
-_compandset2:
-	mov.l		%d0,EXC_TEMP+0x4(%a6)		# store for possible restart
-	mov.l		%d0,%d1			# extension word in d0
-
-	rol.w		&0x4,%d0
-	andi.w		&0xf,%d0		# extract Rn2
-	mov.l		(EXC_DREGS,%a6,%d0.w*4),%a1 # fetch ADDR2
-	mov.l		%a1,ADDR2(%a6)
-
-	mov.l		%d1,%d0
-
-	lsr.w		&0x6,%d1
-	andi.w		&0x7,%d1		# extract Du2
-	mov.l		(EXC_DREGS,%a6,%d1.w*4),%d5 # fetch Update2 Op
-
-	andi.w		&0x7,%d0		# extract Dc2
-	mov.l		(EXC_DREGS,%a6,%d0.w*4),%d3 # fetch Compare2 Op
-	mov.w		%d0,DC2(%a6)
-
-	mov.w		EXC_EXTWORD(%a6),%d0
-	mov.l		%d0,%d1
-
-	rol.w		&0x4,%d0
-	andi.w		&0xf,%d0		# extract Rn1
-	mov.l		(EXC_DREGS,%a6,%d0.w*4),%a0 # fetch ADDR1
-	mov.l		%a0,ADDR1(%a6)
-
-	mov.l		%d1,%d0
-
-	lsr.w		&0x6,%d1
-	andi.w		&0x7,%d1		# extract Du1
-	mov.l		(EXC_DREGS,%a6,%d1.w*4),%d4 # fetch Update1 Op
-
-	andi.w		&0x7,%d0		# extract Dc1
-	mov.l		(EXC_DREGS,%a6,%d0.w*4),%d2 # fetch Compare1 Op
-	mov.w		%d0,DC1(%a6)
-
-	btst		&0x1,EXC_OPWORD(%a6)	# word or long?
-	sne		%d7
-
-	btst		&0x5,EXC_ISR(%a6)	# user or supervisor?
-	sne		%d6
-
-	mov.l		%a0,%a2
-	mov.l		%a1,%a3
-
-	mov.l		%d7,%d1			# pass size
-	mov.l		%d6,%d0			# pass mode
-	bsr.l		_real_lock_page		# lock page
-	mov.l		%a2,%a0
-	tst.l		%d0			# error?
-	bne.l		_cas_terminate2		# yes
-
-	mov.l		%d7,%d1			# pass size
-	mov.l		%d6,%d0			# pass mode
-	mov.l		%a3,%a0			# pass addr
-	bsr.l		_real_lock_page		# lock page
-	mov.l		%a3,%a0
-	tst.l		%d0			# error?
-	bne.b		cas_preterm		# yes
-
-	mov.l		%a2,%a0
-	mov.l		%a3,%a1
-
-	bra.l		_real_cas2
-
-# if the 2nd lock attempt fails, then we must still unlock the
-# first page(s).
-cas_preterm:
-	mov.l		%d0,-(%sp)		# save FSLW
-	mov.l		%d7,%d1			# pass size
-	mov.l		%d6,%d0			# pass mode
-	mov.l		%a2,%a0			# pass ADDR1
-	bsr.l		_real_unlock_page	# unlock first page(s)
-	mov.l		(%sp)+,%d0		# restore FSLW
-	mov.l		%a3,%a0			# pass failing addr
-	bra.l		_cas_terminate2
-
-#############################################################
-
-	global		_isp_cas2_finish
-_isp_cas2_finish:
-	btst		&0x1,EXC_OPWORD(%a6)
-	bne.b		cas2_finish_l
-
-	mov.w		EXC_CC(%a6),%cc		# load old ccodes
-	cmp.w		%d0,%d2
-	bne.b		cas2_finish_w_save
-	cmp.w		%d1,%d3
-cas2_finish_w_save:
-	mov.w		%cc,EXC_CC(%a6)		# save new ccodes
-
-	tst.b		%d4			# update compare reg?
-	bne.b		cas2_finish_w_done	# no
-
-	mov.w		DC2(%a6),%d3		# fetch Dc2
-	mov.w		%d1,(2+EXC_DREGS,%a6,%d3.w*4) # store new Compare2 Op
-
-	mov.w		DC1(%a6),%d2		# fetch Dc1
-	mov.w		%d0,(2+EXC_DREGS,%a6,%d2.w*4) # store new Compare1 Op
-
-cas2_finish_w_done:
-	btst		&0x5,EXC_ISR(%a6)
-	sne		%d2
-	mov.l		%d2,%d0			# pass mode
-	sf		%d1			# pass size
-	mov.l		ADDR1(%a6),%a0		# pass ADDR1
-	bsr.l		_real_unlock_page	# unlock page
-
-	mov.l		%d2,%d0			# pass mode
-	sf		%d1			# pass size
-	mov.l		ADDR2(%a6),%a0		# pass ADDR2
-	bsr.l		_real_unlock_page	# unlock page
-	rts
-
-cas2_finish_l:
-	mov.w		EXC_CC(%a6),%cc		# load old ccodes
-	cmp.l		%d0,%d2
-	bne.b		cas2_finish_l_save
-	cmp.l		%d1,%d3
-cas2_finish_l_save:
-	mov.w		%cc,EXC_CC(%a6)		# save new ccodes
-
-	tst.b		%d4			# update compare reg?
-	bne.b		cas2_finish_l_done	# no
-
-	mov.w		DC2(%a6),%d3		# fetch Dc2
-	mov.l		%d1,(EXC_DREGS,%a6,%d3.w*4) # store new Compare2 Op
-
-	mov.w		DC1(%a6),%d2		# fetch Dc1
-	mov.l		%d0,(EXC_DREGS,%a6,%d2.w*4) # store new Compare1 Op
-
-cas2_finish_l_done:
-	btst		&0x5,EXC_ISR(%a6)
-	sne		%d2
-	mov.l		%d2,%d0			# pass mode
-	st		%d1			# pass size
-	mov.l		ADDR1(%a6),%a0		# pass ADDR1
-	bsr.l		_real_unlock_page	# unlock page
-
-	mov.l		%d2,%d0			# pass mode
-	st		%d1			# pass size
-	mov.l		ADDR2(%a6),%a0		# pass ADDR2
-	bsr.l		_real_unlock_page	# unlock page
-	rts
-
-########
-	global		cr_cas2
-cr_cas2:
-	mov.l		EXC_TEMP+0x4(%a6),%d0
-	bra.w		_compandset2
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	_compandset(): routine to emulate cas w/ misaligned <ea>	#
-#		       (internal to package)				#
-#	_isp_cas_finish(): routine called when cas emulation completes	#
-#			   (external and internal to package)		#
-#	_isp_cas_restart(): restart cas emulation after a fault		#
-#			    (external to package)			#
-#	_isp_cas_terminate(): create access error stack frame on fault	#
-#			      (external and internal to package)	#
-#	_isp_cas_inrange(): checks whether instr addess is within range	#
-#			    of core cas/cas2emulation code		#
-#			    (external to package)			#
-#									#
-# XREF ****************************************************************	#
-#	_calc_ea(): calculate effective address				#
-#									#
-# INPUT ***************************************************************	#
-# compandset():								#
-#	none								#
-# _isp_cas_restart():							#
-#	d6 = previous sfc/dfc						#
-# _isp_cas_finish():							#
-# _isp_cas_terminate():							#
-#	a0 = failing address						#
-#	d0 = FSLW							#
-#	d6 = previous sfc/dfc						#
-# _isp_cas_inrange():							#
-#	a0 = instruction address to be checked				#
-#									#
-# OUTPUT **************************************************************	#
-# compandset():								#
-#		none							#
-# _isp_cas_restart():							#
-#	a0 = effective address						#
-#	d7 = word or longword flag					#
-# _isp_cas_finish():							#
-#	a0 = effective address						#
-# _isp_cas_terminate():							#
-#	initial register set before emulation exception			#
-# _isp_cas_inrange():							#
-#	d0 = 0 => in range; -1 => out of range				#
-#									#
-# ALGORITHM ***********************************************************	#
-#									#
-# compandset():								#
-#	First, calculate the effective address. Then, decode the	#
-# instruction word and fetch the "compare" (DC) and "update" (Du)	#
-# operands.								#
-#	Next, call the external routine _real_lock_page() so that the	#
-# operating system can keep this page from being paged out while we're	#
-# in this routine. If this call fails, jump to _cas_terminate2().	#
-#	The routine then branches to _real_cas(). This external routine	#
-# that actually emulates cas can be supplied by the external os or	#
-# made to point directly back into the 060ISP which has a routine for	#
-# this purpose.								#
-#									#
-# _isp_cas_finish():							#
-#	Either way, after emulation, the package is re-entered at	#
-# _isp_cas_finish(). This routine re-compares the operands in order to	#
-# set the condition codes. Finally, these routines will call		#
-# _real_unlock_page() in order to unlock the pages that were previously	#
-# locked.								#
-#									#
-# _isp_cas_restart():							#
-#	This routine can be entered from an access error handler where	#
-# the emulation sequence should be re-started from the beginning.	#
-#									#
-# _isp_cas_terminate():							#
-#	This routine can be entered from an access error handler where	#
-# an emulation operand access failed and the operating system would	#
-# like an access error stack frame created instead of the current	#
-# unimplemented integer instruction frame.				#
-#	Also, the package enters here if a call to _real_lock_page()	#
-# fails.								#
-#									#
-# _isp_cas_inrange():							#
-#	Checks to see whether the instruction address passed to it in	#
-# a0 is within the software package cas/cas2 emulation routines. This	#
-# can be helpful for an operating system to determine whether an access	#
-# error during emulation was due to a cas/cas2 emulation access.	#
-#									#
-#########################################################################
-
-set DC,		EXC_TEMP+0x8
-set ADDR,	EXC_TEMP+0x4
-
-	global		_compandset
-_compandset:
-	btst		&0x1,EXC_OPWORD(%a6)	# word or long operation?
-	bne.b		compandsetl		# long
-
-compandsetw:
-	movq.l		&0x2,%d0		# size = 2 bytes
-	bsr.l		_calc_ea		# a0 = calculated <ea>
-	mov.l		%a0,ADDR(%a6)		# save <ea> for possible restart
-	sf		%d7			# clear d7 for word size
-	bra.b		compandsetfetch
-
-compandsetl:
-	movq.l		&0x4,%d0		# size = 4 bytes
-	bsr.l		_calc_ea		# a0 = calculated <ea>
-	mov.l		%a0,ADDR(%a6)		# save <ea> for possible restart
-	st		%d7			# set d7 for longword size
-
-compandsetfetch:
-	mov.w		EXC_EXTWORD(%a6),%d0	# fetch cas extension word
-	mov.l		%d0,%d1			# make a copy
-
-	lsr.w		&0x6,%d0
-	andi.w		&0x7,%d0		# extract Du
-	mov.l		(EXC_DREGS,%a6,%d0.w*4),%d2 # get update operand
-
-	andi.w		&0x7,%d1		# extract Dc
-	mov.l		(EXC_DREGS,%a6,%d1.w*4),%d4 # get compare operand
-	mov.w		%d1,DC(%a6)		# save Dc
-
-	btst		&0x5,EXC_ISR(%a6)	# which mode for exception?
-	sne		%d6			# set on supervisor mode
-
-	mov.l		%a0,%a2			# save temporarily
-	mov.l		%d7,%d1			# pass size
-	mov.l		%d6,%d0			# pass mode
-	bsr.l		_real_lock_page		# lock page
-	tst.l		%d0			# did error occur?
-	bne.w		_cas_terminate2		# yes, clean up the mess
-	mov.l		%a2,%a0			# pass addr in a0
-
-	bra.l		_real_cas
-
-########
-	global		_isp_cas_finish
-_isp_cas_finish:
-	btst		&0x1,EXC_OPWORD(%a6)
-	bne.b		cas_finish_l
-
-# just do the compare again since it's faster than saving the ccodes
-# from the locked routine...
-cas_finish_w:
-	mov.w		EXC_CC(%a6),%cc		# restore cc
-	cmp.w		%d0,%d4			# do word compare
-	mov.w		%cc,EXC_CC(%a6)		# save cc
-
-	tst.b		%d1			# update compare reg?
-	bne.b		cas_finish_w_done	# no
-
-	mov.w		DC(%a6),%d3
-	mov.w		%d0,(EXC_DREGS+2,%a6,%d3.w*4) # Dc = destination
-
-cas_finish_w_done:
-	mov.l		ADDR(%a6),%a0		# pass addr
-	sf		%d1			# pass size
-	btst		&0x5,EXC_ISR(%a6)
-	sne		%d0			# pass mode
-	bsr.l		_real_unlock_page	# unlock page
-	rts
-
-# just do the compare again since it's faster than saving the ccodes
-# from the locked routine...
-cas_finish_l:
-	mov.w		EXC_CC(%a6),%cc		# restore cc
-	cmp.l		%d0,%d4			# do longword compare
-	mov.w		%cc,EXC_CC(%a6)		# save cc
-
-	tst.b		%d1			# update compare reg?
-	bne.b		cas_finish_l_done	# no
-
-	mov.w		DC(%a6),%d3
-	mov.l		%d0,(EXC_DREGS,%a6,%d3.w*4) # Dc = destination
-
-cas_finish_l_done:
-	mov.l		ADDR(%a6),%a0		# pass addr
-	st		%d1			# pass size
-	btst		&0x5,EXC_ISR(%a6)
-	sne		%d0			# pass mode
-	bsr.l		_real_unlock_page	# unlock page
-	rts
-
-########
-
-	global		_isp_cas_restart
-_isp_cas_restart:
-	mov.l		%d6,%sfc		# restore previous sfc
-	mov.l		%d6,%dfc		# restore previous dfc
-
-	cmpi.b		EXC_OPWORD+1(%a6),&0xfc	# cas or cas2?
-	beq.l		cr_cas2			# cas2
-cr_cas:
-	mov.l		ADDR(%a6),%a0		# load <ea>
-	btst		&0x1,EXC_OPWORD(%a6)	# word or long operation?
-	sne		%d7			# set d7 accordingly
-	bra.w		compandsetfetch
-
-########
-
-# At this stage, it would be nice if d0 held the FSLW.
-	global		_isp_cas_terminate
-_isp_cas_terminate:
-	mov.l		%d6,%sfc		# restore previous sfc
-	mov.l		%d6,%dfc		# restore previous dfc
-
-	global		_cas_terminate2
-_cas_terminate2:
-	mov.l		%a0,%a2			# copy failing addr to a2
-
-	mov.l		%d0,-(%sp)
-	bsr.l		isp_restore		# restore An (if ()+ or -())
-	mov.l		(%sp)+,%d0
-
-	addq.l		&0x4,%sp		# remove sub return addr
-	subq.l		&0x8,%sp		# make room for bigger stack
-	subq.l		&0x8,%a6		# shift frame ptr down, too
-	mov.l		&26,%d1			# want to move 51 longwords
-	lea		0x8(%sp),%a0		# get address of old stack
-	lea		0x0(%sp),%a1		# get address of new stack
-cas_term_cont:
-	mov.l		(%a0)+,(%a1)+		# move a longword
-	dbra.w		%d1,cas_term_cont	# keep going
-
-	mov.w		&0x4008,EXC_IVOFF(%a6)	# put new stk fmt, voff
-	mov.l		%a2,EXC_IVOFF+0x2(%a6)	# put faulting addr on stack
-	mov.l		%d0,EXC_IVOFF+0x6(%a6)	# put FSLW on stack
-	movm.l		EXC_DREGS(%a6),&0x3fff	# restore user regs
-	unlk		%a6			# unlink stack frame
-	bra.l		_real_access
-
-########
-
-	global		_isp_cas_inrange
-_isp_cas_inrange:
-	clr.l		%d0			# clear return result
-	lea		_CASHI(%pc),%a1		# load end of CAS core code
-	cmp.l		%a1,%a0			# is PC in range?
-	blt.b		cin_no			# no
-	lea		_CASLO(%pc),%a1		# load begin of CAS core code
-	cmp.l		%a0,%a1			# is PC in range?
-	blt.b		cin_no			# no
-	rts					# yes; return d0 = 0
-cin_no:
-	mov.l		&-0x1,%d0		# out of range; return d0 = -1
-	rts
-
-#################################################################
-#################################################################
-#################################################################
-# This is the start of the cas and cas2 "core" emulation code.	#
-# This is the section that may need to be replaced by the host	#
-# OS if it is too operating system-specific.			#
-# Please refer to the package documentation to see how to	#
-# "replace" this section, if necessary.				#
-#################################################################
-#################################################################
-#################################################################
-
-#       ######      ##      ######     ####
-#       #	   #  #     #         #    #
-#	#	  ######    ######        #
-#	#	  #    #         #      #
-#       ######    #    #    ######    ######
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	_isp_cas2(): "core" emulation code for the cas2 instruction	#
-#									#
-# XREF ****************************************************************	#
-#	_isp_cas2_finish() - only exit point for this emulation code;	#
-#			     do clean-up; calculate ccodes; store	#
-#			     Compare Ops if appropriate.		#
-#									#
-# INPUT ***************************************************************	#
-#	*see chart below*						#
-#									#
-# OUTPUT **************************************************************	#
-#	*see chart below*						#
-#									#
-# ALGORITHM ***********************************************************	#
-#	(1) Make several copies of the effective address.		#
-#	(2) Save current SR; Then mask off all maskable interrupts.	#
-#	(3) Save current SFC/DFC (ASSUMED TO BE EQUAL!!!); Then set	#
-#	    according to whether exception occurred in user or		#
-#	    supervisor mode.						#
-#	(4) Use "plpaw" instruction to pre-load ATC with effective	#
-#	    address pages(s). THIS SHOULD NOT FAULT!!! The relevant	#
-#	    page(s) should have already been made resident prior to	#
-#	    entering this routine.					#
-#	(5) Push the operand lines from the cache w/ "cpushl".		#
-#	    In the 68040, this was done within the locked region. In	#
-#	    the 68060, it is done outside of the locked region.		#
-#	(6) Use "plpar" instruction to do a re-load of ATC entries for	#
-#	    ADDR1 since ADDR2 entries may have pushed ADDR1 out of the	#
-#	    ATC.							#
-#	(7) Pre-fetch the core emulation instructions by executing	#
-#	    one branch within each physical line (16 bytes) of the code	#
-#	    before actually executing the code.				#
-#	(8) Load the BUSCR w/ the bus lock value.			#
-#	(9) Fetch the source operands using "moves".			#
-#	(10)Do the compares. If both equal, go to step (13).		#
-#	(11)Unequal. No update occurs. But, we do write the DST1 op	#
-#	    back to itself (as w/ the '040) so we can gracefully unlock	#
-#	    the bus (and assert LOCKE*) using BUSCR and the final move.	#
-#	(12)Exit.							#
-#	(13)Write update operand to the DST locations. Use BUSCR to	#
-#	    assert LOCKE* for the final write operation.		#
-#	(14)Exit.							#
-#									#
-#	The algorithm is actually implemented slightly differently	#
-# depending on the size of the operation and the misalignment of the	#
-# operands. A misaligned operand must be written in aligned chunks or	#
-# else the BUSCR register control gets confused.			#
-#									#
-#########################################################################
-
-#################################################################
-# THIS IS THE STATE OF THE INTEGER REGISTER FILE UPON		#
-# ENTERING _isp_cas2().						#
-#								#
-# D0 = xxxxxxxx							#
-# D1 = xxxxxxxx							#
-# D2 = cmp operand 1						#
-# D3 = cmp operand 2						#
-# D4 = update oper 1						#
-# D5 = update oper 2						#
-# D6 = 'xxxxxxff if supervisor mode; 'xxxxxx00 if user mode	#
-# D7 = 'xxxxxxff if longword operation; 'xxxxxx00 if word	#
-# A0 = ADDR1							#
-# A1 = ADDR2							#
-# A2 = xxxxxxxx							#
-# A3 = xxxxxxxx							#
-# A4 = xxxxxxxx							#
-# A5 = xxxxxxxx							#
-# A6 = frame pointer						#
-# A7 = stack pointer						#
-#################################################################
-
-#	align		0x1000
-# beginning label used by _isp_cas_inrange()
-	global		_CASLO
-_CASLO:
-
-	global		_isp_cas2
-_isp_cas2:
-	tst.b		%d6			# user or supervisor mode?
-	bne.b		cas2_supervisor		# supervisor
-cas2_user:
-	movq.l		&0x1,%d0		# load user data fc
-	bra.b		cas2_cont
-cas2_supervisor:
-	movq.l		&0x5,%d0		# load supervisor data fc
-cas2_cont:
-	tst.b		%d7			# word or longword?
-	beq.w		cas2w			# word
-
-####
-cas2l:
-	mov.l		%a0,%a2			# copy ADDR1
-	mov.l		%a1,%a3			# copy ADDR2
-	mov.l		%a0,%a4			# copy ADDR1
-	mov.l		%a1,%a5			# copy ADDR2
-
-	addq.l		&0x3,%a4		# ADDR1+3
-	addq.l		&0x3,%a5		# ADDR2+3
-	mov.l		%a2,%d1			# ADDR1
-
-# mask interrupts levels 0-6. save old mask value.
-	mov.w		%sr,%d7			# save current SR
-	ori.w		&0x0700,%sr		# inhibit interrupts
-
-# load the SFC and DFC with the appropriate mode.
-	movc		%sfc,%d6		# save old SFC/DFC
-	movc		%d0,%sfc		# store new SFC
-	movc		%d0,%dfc		# store new DFC
-
-# pre-load the operand ATC. no page faults should occur here because
-# _real_lock_page() should have taken care of this.
-	plpaw		(%a2)			# load atc for ADDR1
-	plpaw		(%a4)			# load atc for ADDR1+3
-	plpaw		(%a3)			# load atc for ADDR2
-	plpaw		(%a5)			# load atc for ADDR2+3
-
-# push the operand lines from the cache if they exist.
-	cpushl		%dc,(%a2)		# push line for ADDR1
-	cpushl		%dc,(%a4)		# push line for ADDR1+3
-	cpushl		%dc,(%a3)		# push line for ADDR2
-	cpushl		%dc,(%a5)		# push line for ADDR2+2
-
-	mov.l		%d1,%a2			# ADDR1
-	addq.l		&0x3,%d1
-	mov.l		%d1,%a4			# ADDR1+3
-# if ADDR1 was ATC resident before the above "plpaw" and was executed
-# and it was the next entry scheduled for replacement and ADDR2
-# shares the same set, then the "plpaw" for ADDR2 can push the ADDR1
-# entries from the ATC. so, we do a second set of "plpa"s.
-	plpar		(%a2)			# load atc for ADDR1
-	plpar		(%a4)			# load atc for ADDR1+3
-
-# load the BUSCR values.
-	mov.l		&0x80000000,%a2		# assert LOCK* buscr value
-	mov.l		&0xa0000000,%a3		# assert LOCKE* buscr value
-	mov.l		&0x00000000,%a4		# buscr unlock value
-
-# there are three possible mis-aligned cases for longword cas. they
-# are separated because the final write which asserts LOCKE* must
-# be aligned.
-	mov.l		%a0,%d0			# is ADDR1 misaligned?
-	andi.b		&0x3,%d0
-	beq.b		CAS2L_ENTER		# no
-	cmpi.b		%d0,&0x2
-	beq.w		CAS2L2_ENTER		# yes; word misaligned
-	bra.w		CAS2L3_ENTER		# yes; byte misaligned
-
-#
-# D0 = dst operand 1 <-
-# D1 = dst operand 2 <-
-# D2 = cmp operand 1
-# D3 = cmp operand 2
-# D4 = update oper 1
-# D5 = update oper 2
-# D6 = old SFC/DFC
-# D7 = old SR
-# A0 = ADDR1
-# A1 = ADDR2
-# A2 = bus LOCK*  value
-# A3 = bus LOCKE* value
-# A4 = bus unlock value
-# A5 = xxxxxxxx
-#
-	align		0x10
-CAS2L_START:
-	movc		%a2,%buscr		# assert LOCK*
-	movs.l		(%a1),%d1		# fetch Dest2[31:0]
-	movs.l		(%a0),%d0		# fetch Dest1[31:0]
-	bra.b		CAS2L_CONT
-CAS2L_ENTER:
-	bra.b		~+16
-
-CAS2L_CONT:
-	cmp.l		%d0,%d2			# Dest1 - Compare1
-	bne.b		CAS2L_NOUPDATE
-	cmp.l		%d1,%d3			# Dest2 - Compare2
-	bne.b		CAS2L_NOUPDATE
-	movs.l		%d5,(%a1)		# Update2[31:0] -> DEST2
-	bra.b		CAS2L_UPDATE
-	bra.b		~+16
-
-CAS2L_UPDATE:
-	movc		%a3,%buscr		# assert LOCKE*
-	movs.l		%d4,(%a0)		# Update1[31:0] -> DEST1
-	movc		%a4,%buscr		# unlock the bus
-	bra.b		cas2l_update_done
-	bra.b		~+16
-
-CAS2L_NOUPDATE:
-	movc		%a3,%buscr		# assert LOCKE*
-	movs.l		%d0,(%a0)		# Dest1[31:0] -> DEST1
-	movc		%a4,%buscr		# unlock the bus
-	bra.b		cas2l_noupdate_done
-	bra.b		~+16
-
-CAS2L_FILLER:
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	bra.b		CAS2L_START
-
-####
-
-#################################################################
-# THIS MUST BE THE STATE OF THE INTEGER REGISTER FILE UPON	#
-# ENTERING _isp_cas2().						#
-#								#
-# D0 = destination[31:0] operand 1				#
-# D1 = destination[31:0] operand 2				#
-# D2 = cmp[31:0] operand 1					#
-# D3 = cmp[31:0] operand 2					#
-# D4 = 'xxxxxx11 -> no reg update; 'xxxxxx00 -> update required	#
-# D5 = xxxxxxxx							#
-# D6 = xxxxxxxx							#
-# D7 = xxxxxxxx							#
-# A0 = xxxxxxxx							#
-# A1 = xxxxxxxx							#
-# A2 = xxxxxxxx							#
-# A3 = xxxxxxxx							#
-# A4 = xxxxxxxx							#
-# A5 = xxxxxxxx							#
-# A6 = frame pointer						#
-# A7 = stack pointer						#
-#################################################################
-
-cas2l_noupdate_done:
-
-# restore previous SFC/DFC value.
-	movc		%d6,%sfc		# restore old SFC
-	movc		%d6,%dfc		# restore old DFC
-
-# restore previous interrupt mask level.
-	mov.w		%d7,%sr			# restore old SR
-
-	sf		%d4			# indicate no update was done
-	bra.l		_isp_cas2_finish
-
-cas2l_update_done:
-
-# restore previous SFC/DFC value.
-	movc		%d6,%sfc		# restore old SFC
-	movc		%d6,%dfc		# restore old DFC
-
-# restore previous interrupt mask level.
-	mov.w		%d7,%sr			# restore old SR
-
-	st		%d4			# indicate update was done
-	bra.l		_isp_cas2_finish
-####
-
-	align		0x10
-CAS2L2_START:
-	movc		%a2,%buscr		# assert LOCK*
-	movs.l		(%a1),%d1		# fetch Dest2[31:0]
-	movs.l		(%a0),%d0		# fetch Dest1[31:0]
-	bra.b		CAS2L2_CONT
-CAS2L2_ENTER:
-	bra.b		~+16
-
-CAS2L2_CONT:
-	cmp.l		%d0,%d2			# Dest1 - Compare1
-	bne.b		CAS2L2_NOUPDATE
-	cmp.l		%d1,%d3			# Dest2 - Compare2
-	bne.b		CAS2L2_NOUPDATE
-	movs.l		%d5,(%a1)		# Update2[31:0] -> Dest2
-	bra.b		CAS2L2_UPDATE
-	bra.b		~+16
-
-CAS2L2_UPDATE:
-	swap		%d4			# get Update1[31:16]
-	movs.w		%d4,(%a0)+		# Update1[31:16] -> DEST1
-	movc		%a3,%buscr		# assert LOCKE*
-	swap		%d4			# get Update1[15:0]
-	bra.b		CAS2L2_UPDATE2
-	bra.b		~+16
-
-CAS2L2_UPDATE2:
-	movs.w		%d4,(%a0)		# Update1[15:0] -> DEST1+0x2
-	movc		%a4,%buscr		# unlock the bus
-	bra.w		cas2l_update_done
-	nop
-	bra.b		~+16
-
-CAS2L2_NOUPDATE:
-	swap		%d0			# get Dest1[31:16]
-	movs.w		%d0,(%a0)+		# Dest1[31:16] -> DEST1
-	movc		%a3,%buscr		# assert LOCKE*
-	swap		%d0			# get Dest1[15:0]
-	bra.b		CAS2L2_NOUPDATE2
-	bra.b		~+16
-
-CAS2L2_NOUPDATE2:
-	movs.w		%d0,(%a0)		# Dest1[15:0] -> DEST1+0x2
-	movc		%a4,%buscr		# unlock the bus
-	bra.w		cas2l_noupdate_done
-	nop
-	bra.b		~+16
-
-CAS2L2_FILLER:
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	bra.b		CAS2L2_START
-
-#################################
-
-	align		0x10
-CAS2L3_START:
-	movc		%a2,%buscr		# assert LOCK*
-	movs.l		(%a1),%d1		# fetch Dest2[31:0]
-	movs.l		(%a0),%d0		# fetch Dest1[31:0]
-	bra.b		CAS2L3_CONT
-CAS2L3_ENTER:
-	bra.b		~+16
-
-CAS2L3_CONT:
-	cmp.l		%d0,%d2			# Dest1 - Compare1
-	bne.b		CAS2L3_NOUPDATE
-	cmp.l		%d1,%d3			# Dest2 - Compare2
-	bne.b		CAS2L3_NOUPDATE
-	movs.l		%d5,(%a1)		# Update2[31:0] -> DEST2
-	bra.b		CAS2L3_UPDATE
-	bra.b		~+16
-
-CAS2L3_UPDATE:
-	rol.l		&0x8,%d4		# get Update1[31:24]
-	movs.b		%d4,(%a0)+		# Update1[31:24] -> DEST1
-	swap		%d4			# get Update1[23:8]
-	movs.w		%d4,(%a0)+		# Update1[23:8] -> DEST1+0x1
-	bra.b		CAS2L3_UPDATE2
-	bra.b		~+16
-
-CAS2L3_UPDATE2:
-	rol.l		&0x8,%d4		# get Update1[7:0]
-	movc		%a3,%buscr		# assert LOCKE*
-	movs.b		%d4,(%a0)		# Update1[7:0] -> DEST1+0x3
-	bra.b		CAS2L3_UPDATE3
-	nop
-	bra.b		~+16
-
-CAS2L3_UPDATE3:
-	movc		%a4,%buscr		# unlock the bus
-	bra.w		cas2l_update_done
-	nop
-	nop
-	nop
-	bra.b		~+16
-
-CAS2L3_NOUPDATE:
-	rol.l		&0x8,%d0		# get Dest1[31:24]
-	movs.b		%d0,(%a0)+		# Dest1[31:24] -> DEST1
-	swap		%d0			# get Dest1[23:8]
-	movs.w		%d0,(%a0)+		# Dest1[23:8] -> DEST1+0x1
-	bra.b		CAS2L3_NOUPDATE2
-	bra.b		~+16
-
-CAS2L3_NOUPDATE2:
-	rol.l		&0x8,%d0		# get Dest1[7:0]
-	movc		%a3,%buscr		# assert LOCKE*
-	movs.b		%d0,(%a0)		# Update1[7:0] -> DEST1+0x3
-	bra.b		CAS2L3_NOUPDATE3
-	nop
-	bra.b		~+16
-
-CAS2L3_NOUPDATE3:
-	movc		%a4,%buscr		# unlock the bus
-	bra.w		cas2l_noupdate_done
-	nop
-	nop
-	nop
-	bra.b		~+14
-
-CAS2L3_FILLER:
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	bra.w		CAS2L3_START
-
-#############################################################
-#############################################################
-
-cas2w:
-	mov.l		%a0,%a2			# copy ADDR1
-	mov.l		%a1,%a3			# copy ADDR2
-	mov.l		%a0,%a4			# copy ADDR1
-	mov.l		%a1,%a5			# copy ADDR2
-
-	addq.l		&0x1,%a4		# ADDR1+1
-	addq.l		&0x1,%a5		# ADDR2+1
-	mov.l		%a2,%d1			# ADDR1
-
-# mask interrupt levels 0-6. save old mask value.
-	mov.w		%sr,%d7			# save current SR
-	ori.w		&0x0700,%sr		# inhibit interrupts
-
-# load the SFC and DFC with the appropriate mode.
-	movc		%sfc,%d6		# save old SFC/DFC
-	movc		%d0,%sfc		# store new SFC
-	movc		%d0,%dfc		# store new DFC
-
-# pre-load the operand ATC. no page faults should occur because
-# _real_lock_page() should have taken care of this.
-	plpaw		(%a2)			# load atc for ADDR1
-	plpaw		(%a4)			# load atc for ADDR1+1
-	plpaw		(%a3)			# load atc for ADDR2
-	plpaw		(%a5)			# load atc for ADDR2+1
-
-# push the operand cache lines from the cache if they exist.
-	cpushl		%dc,(%a2)		# push line for ADDR1
-	cpushl		%dc,(%a4)		# push line for ADDR1+1
-	cpushl		%dc,(%a3)		# push line for ADDR2
-	cpushl		%dc,(%a5)		# push line for ADDR2+1
-
-	mov.l		%d1,%a2			# ADDR1
-	addq.l		&0x3,%d1
-	mov.l		%d1,%a4			# ADDR1+3
-# if ADDR1 was ATC resident before the above "plpaw" and was executed
-# and it was the next entry scheduled for replacement and ADDR2
-# shares the same set, then the "plpaw" for ADDR2 can push the ADDR1
-# entries from the ATC. so, we do a second set of "plpa"s.
-	plpar		(%a2)			# load atc for ADDR1
-	plpar		(%a4)			# load atc for ADDR1+3
-
-# load the BUSCR values.
-	mov.l		&0x80000000,%a2		# assert LOCK* buscr value
-	mov.l		&0xa0000000,%a3		# assert LOCKE* buscr value
-	mov.l		&0x00000000,%a4		# buscr unlock value
-
-# there are two possible mis-aligned cases for word cas. they
-# are separated because the final write which asserts LOCKE* must
-# be aligned.
-	mov.l		%a0,%d0			# is ADDR1 misaligned?
-	btst		&0x0,%d0
-	bne.w		CAS2W2_ENTER		# yes
-	bra.b		CAS2W_ENTER		# no
-
-#
-# D0 = dst operand 1 <-
-# D1 = dst operand 2 <-
-# D2 = cmp operand 1
-# D3 = cmp operand 2
-# D4 = update oper 1
-# D5 = update oper 2
-# D6 = old SFC/DFC
-# D7 = old SR
-# A0 = ADDR1
-# A1 = ADDR2
-# A2 = bus LOCK*  value
-# A3 = bus LOCKE* value
-# A4 = bus unlock value
-# A5 = xxxxxxxx
-#
-	align		0x10
-CAS2W_START:
-	movc		%a2,%buscr		# assert LOCK*
-	movs.w		(%a1),%d1		# fetch Dest2[15:0]
-	movs.w		(%a0),%d0		# fetch Dest1[15:0]
-	bra.b		CAS2W_CONT2
-CAS2W_ENTER:
-	bra.b		~+16
-
-CAS2W_CONT2:
-	cmp.w		%d0,%d2			# Dest1 - Compare1
-	bne.b		CAS2W_NOUPDATE
-	cmp.w		%d1,%d3			# Dest2 - Compare2
-	bne.b		CAS2W_NOUPDATE
-	movs.w		%d5,(%a1)		# Update2[15:0] -> DEST2
-	bra.b		CAS2W_UPDATE
-	bra.b		~+16
-
-CAS2W_UPDATE:
-	movc		%a3,%buscr		# assert LOCKE*
-	movs.w		%d4,(%a0)		# Update1[15:0] -> DEST1
-	movc		%a4,%buscr		# unlock the bus
-	bra.b		cas2w_update_done
-	bra.b		~+16
-
-CAS2W_NOUPDATE:
-	movc		%a3,%buscr		# assert LOCKE*
-	movs.w		%d0,(%a0)		# Dest1[15:0] -> DEST1
-	movc		%a4,%buscr		# unlock the bus
-	bra.b		cas2w_noupdate_done
-	bra.b		~+16
-
-CAS2W_FILLER:
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	bra.b		CAS2W_START
-
-####
-
-#################################################################
-# THIS MUST BE THE STATE OF THE INTEGER REGISTER FILE UPON	#
-# ENTERING _isp_cas2().						#
-#								#
-# D0 = destination[15:0] operand 1				#
-# D1 = destination[15:0] operand 2				#
-# D2 = cmp[15:0] operand 1					#
-# D3 = cmp[15:0] operand 2					#
-# D4 = 'xxxxxx11 -> no reg update; 'xxxxxx00 -> update required	#
-# D5 = xxxxxxxx							#
-# D6 = xxxxxxxx							#
-# D7 = xxxxxxxx							#
-# A0 = xxxxxxxx							#
-# A1 = xxxxxxxx							#
-# A2 = xxxxxxxx							#
-# A3 = xxxxxxxx							#
-# A4 = xxxxxxxx							#
-# A5 = xxxxxxxx							#
-# A6 = frame pointer						#
-# A7 = stack pointer						#
-#################################################################
-
-cas2w_noupdate_done:
-
-# restore previous SFC/DFC value.
-	movc		%d6,%sfc		# restore old SFC
-	movc		%d6,%dfc		# restore old DFC
-
-# restore previous interrupt mask level.
-	mov.w		%d7,%sr			# restore old SR
-
-	sf		%d4			# indicate no update was done
-	bra.l		_isp_cas2_finish
-
-cas2w_update_done:
-
-# restore previous SFC/DFC value.
-	movc		%d6,%sfc		# restore old SFC
-	movc		%d6,%dfc		# restore old DFC
-
-# restore previous interrupt mask level.
-	mov.w		%d7,%sr			# restore old SR
-
-	st		%d4			# indicate update was done
-	bra.l		_isp_cas2_finish
-####
-
-	align		0x10
-CAS2W2_START:
-	movc		%a2,%buscr		# assert LOCK*
-	movs.w		(%a1),%d1		# fetch Dest2[15:0]
-	movs.w		(%a0),%d0		# fetch Dest1[15:0]
-	bra.b		CAS2W2_CONT2
-CAS2W2_ENTER:
-	bra.b		~+16
-
-CAS2W2_CONT2:
-	cmp.w		%d0,%d2			# Dest1 - Compare1
-	bne.b		CAS2W2_NOUPDATE
-	cmp.w		%d1,%d3			# Dest2 - Compare2
-	bne.b		CAS2W2_NOUPDATE
-	movs.w		%d5,(%a1)		# Update2[15:0] -> DEST2
-	bra.b		CAS2W2_UPDATE
-	bra.b		~+16
-
-CAS2W2_UPDATE:
-	ror.l		&0x8,%d4		# get Update1[15:8]
-	movs.b		%d4,(%a0)+		# Update1[15:8] -> DEST1
-	movc		%a3,%buscr		# assert LOCKE*
-	rol.l		&0x8,%d4		# get Update1[7:0]
-	bra.b		CAS2W2_UPDATE2
-	bra.b		~+16
-
-CAS2W2_UPDATE2:
-	movs.b		%d4,(%a0)		# Update1[7:0] -> DEST1+0x1
-	movc		%a4,%buscr		# unlock the bus
-	bra.w		cas2w_update_done
-	nop
-	bra.b		~+16
-
-CAS2W2_NOUPDATE:
-	ror.l		&0x8,%d0		# get Dest1[15:8]
-	movs.b		%d0,(%a0)+		# Dest1[15:8] -> DEST1
-	movc		%a3,%buscr		# assert LOCKE*
-	rol.l		&0x8,%d0		# get Dest1[7:0]
-	bra.b		CAS2W2_NOUPDATE2
-	bra.b		~+16
-
-CAS2W2_NOUPDATE2:
-	movs.b		%d0,(%a0)		# Dest1[7:0] -> DEST1+0x1
-	movc		%a4,%buscr		# unlock the bus
-	bra.w		cas2w_noupdate_done
-	nop
-	bra.b		~+16
-
-CAS2W2_FILLER:
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	bra.b		CAS2W2_START
-
-#       ######      ##      ######
-#       #	   #  #     #
-#	#	  ######    ######
-#	#	  #    #         #
-#       ######    #    #    ######
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	_isp_cas(): "core" emulation code for the cas instruction	#
-#									#
-# XREF ****************************************************************	#
-#	_isp_cas_finish() - only exit point for this emulation code;	#
-#			    do clean-up					#
-#									#
-# INPUT ***************************************************************	#
-#	*see entry chart below*						#
-#									#
-# OUTPUT **************************************************************	#
-#	*see exit chart below*						#
-#									#
-# ALGORITHM ***********************************************************	#
-#	(1) Make several copies of the effective address.		#
-#	(2) Save current SR; Then mask off all maskable interrupts.	#
-#	(3) Save current DFC/SFC (ASSUMED TO BE EQUAL!!!); Then set	#
-#	    SFC/DFC according to whether exception occurred in user or	#
-#	    supervisor mode.						#
-#	(4) Use "plpaw" instruction to pre-load ATC with efective	#
-#	    address page(s). THIS SHOULD NOT FAULT!!! The relevant	#
-#	    page(s) should have been made resident prior to entering	#
-#	    this routine.						#
-#	(5) Push the operand lines from the cache w/ "cpushl".		#
-#	    In the 68040, this was done within the locked region. In	#
-#	    the 68060, it is done outside of the locked region.		#
-#	(6) Pre-fetch the core emulation instructions by executing one	#
-#	    branch within each physical line (16 bytes) of the code	#
-#	    before actually executing the code.				#
-#	(7) Load the BUSCR with the bus lock value.			#
-#	(8) Fetch the source operand.					#
-#	(9) Do the compare. If equal, go to step (12).			#
-#	(10)Unequal. No update occurs. But, we do write the DST op back	#
-#	    to itself (as w/ the '040) so we can gracefully unlock	#
-#	    the bus (and assert LOCKE*) using BUSCR and the final move.	#
-#	(11)Exit.							#
-#	(12)Write update operand to the DST location. Use BUSCR to	#
-#	    assert LOCKE* for the final write operation.		#
-#	(13)Exit.							#
-#									#
-#	The algorithm is actually implemented slightly differently	#
-# depending on the size of the operation and the misalignment of the	#
-# operand. A misaligned operand must be written in aligned chunks or	#
-# else the BUSCR register control gets confused.			#
-#									#
-#########################################################################
-
-#########################################################
-# THIS IS THE STATE OF THE INTEGER REGISTER FILE UPON	#
-# ENTERING _isp_cas().					#
-#							#
-# D0 = xxxxxxxx						#
-# D1 = xxxxxxxx						#
-# D2 = update operand					#
-# D3 = xxxxxxxx						#
-# D4 = compare operand					#
-# D5 = xxxxxxxx						#
-# D6 = supervisor ('xxxxxxff) or user mode ('xxxxxx00)	#
-# D7 = longword ('xxxxxxff) or word size ('xxxxxx00)	#
-# A0 = ADDR						#
-# A1 = xxxxxxxx						#
-# A2 = xxxxxxxx						#
-# A3 = xxxxxxxx						#
-# A4 = xxxxxxxx						#
-# A5 = xxxxxxxx						#
-# A6 = frame pointer					#
-# A7 = stack pointer					#
-#########################################################
-
-	global		_isp_cas
-_isp_cas:
-	tst.b		%d6			# user or supervisor mode?
-	bne.b		cas_super		# supervisor
-cas_user:
-	movq.l		&0x1,%d0		# load user data fc
-	bra.b		cas_cont
-cas_super:
-	movq.l		&0x5,%d0		# load supervisor data fc
-
-cas_cont:
-	tst.b		%d7			# word or longword?
-	bne.w		casl			# longword
-
-####
-casw:
-	mov.l		%a0,%a1			# make copy for plpaw1
-	mov.l		%a0,%a2			# make copy for plpaw2
-	addq.l		&0x1,%a2		# plpaw2 points to end of word
-
-	mov.l		%d2,%d3			# d3 = update[7:0]
-	lsr.w		&0x8,%d2		# d2 = update[15:8]
-
-# mask interrupt levels 0-6. save old mask value.
-	mov.w		%sr,%d7			# save current SR
-	ori.w		&0x0700,%sr		# inhibit interrupts
-
-# load the SFC and DFC with the appropriate mode.
-	movc		%sfc,%d6		# save old SFC/DFC
-	movc		%d0,%sfc		# load new sfc
-	movc		%d0,%dfc		# load new dfc
-
-# pre-load the operand ATC. no page faults should occur here because
-# _real_lock_page() should have taken care of this.
-	plpaw		(%a1)			# load atc for ADDR
-	plpaw		(%a2)			# load atc for ADDR+1
-
-# push the operand lines from the cache if they exist.
-	cpushl		%dc,(%a1)		# push dirty data
-	cpushl		%dc,(%a2)		# push dirty data
-
-# load the BUSCR values.
-	mov.l		&0x80000000,%a1		# assert LOCK* buscr value
-	mov.l		&0xa0000000,%a2		# assert LOCKE* buscr value
-	mov.l		&0x00000000,%a3		# buscr unlock value
-
-# pre-load the instruction cache for the following algorithm.
-# this will minimize the number of cycles that LOCK* will be asserted.
-	bra.b		CASW_ENTER		# start pre-loading icache
-
-#
-# D0 = dst operand <-
-# D1 = update[15:8] operand
-# D2 = update[7:0]  operand
-# D3 = xxxxxxxx
-# D4 = compare[15:0] operand
-# D5 = xxxxxxxx
-# D6 = old SFC/DFC
-# D7 = old SR
-# A0 = ADDR
-# A1 = bus LOCK*  value
-# A2 = bus LOCKE* value
-# A3 = bus unlock value
-# A4 = xxxxxxxx
-# A5 = xxxxxxxx
-#
-	align		0x10
-CASW_START:
-	movc		%a1,%buscr		# assert LOCK*
-	movs.w		(%a0),%d0		# fetch Dest[15:0]
-	cmp.w		%d0,%d4			# Dest - Compare
-	bne.b		CASW_NOUPDATE
-	bra.b		CASW_UPDATE
-CASW_ENTER:
-	bra.b		~+16
-
-CASW_UPDATE:
-	movs.b		%d2,(%a0)+		# Update[15:8] -> DEST
-	movc		%a2,%buscr		# assert LOCKE*
-	movs.b		%d3,(%a0)		# Update[7:0] -> DEST+0x1
-	bra.b		CASW_UPDATE2
-	bra.b		~+16
-
-CASW_UPDATE2:
-	movc		%a3,%buscr		# unlock the bus
-	bra.b		casw_update_done
-	nop
-	nop
-	nop
-	nop
-	bra.b		~+16
-
-CASW_NOUPDATE:
-	ror.l		&0x8,%d0		# get Dest[15:8]
-	movs.b		%d0,(%a0)+		# Dest[15:8] -> DEST
-	movc		%a2,%buscr		# assert LOCKE*
-	rol.l		&0x8,%d0		# get Dest[7:0]
-	bra.b		CASW_NOUPDATE2
-	bra.b		~+16
-
-CASW_NOUPDATE2:
-	movs.b		%d0,(%a0)		# Dest[7:0] -> DEST+0x1
-	movc		%a3,%buscr		# unlock the bus
-	bra.b		casw_noupdate_done
-	nop
-	nop
-	bra.b		~+16
-
-CASW_FILLER:
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	bra.b		CASW_START
-
-#################################################################
-# THIS MUST BE THE STATE OF THE INTEGER REGISTER FILE UPON	#
-# CALLING _isp_cas_finish().					#
-#								#
-# D0 = destination[15:0] operand				#
-# D1 = 'xxxxxx11 -> no reg update; 'xxxxxx00 -> update required	#
-# D2 = xxxxxxxx							#
-# D3 = xxxxxxxx							#
-# D4 = compare[15:0] operand					#
-# D5 = xxxxxxxx							#
-# D6 = xxxxxxxx							#
-# D7 = xxxxxxxx							#
-# A0 = xxxxxxxx							#
-# A1 = xxxxxxxx							#
-# A2 = xxxxxxxx							#
-# A3 = xxxxxxxx							#
-# A4 = xxxxxxxx							#
-# A5 = xxxxxxxx							#
-# A6 = frame pointer						#
-# A7 = stack pointer						#
-#################################################################
-
-casw_noupdate_done:
-
-# restore previous SFC/DFC value.
-	movc		%d6,%sfc		# restore old SFC
-	movc		%d6,%dfc		# restore old DFC
-
-# restore previous interrupt mask level.
-	mov.w		%d7,%sr			# restore old SR
-
-	sf		%d1			# indicate no update was done
-	bra.l		_isp_cas_finish
-
-casw_update_done:
-
-# restore previous SFC/DFC value.
-	movc		%d6,%sfc		# restore old SFC
-	movc		%d6,%dfc		# restore old DFC
-
-# restore previous interrupt mask level.
-	mov.w		%d7,%sr			# restore old SR
-
-	st		%d1			# indicate update was done
-	bra.l		_isp_cas_finish
-
-################
-
-# there are two possible mis-aligned cases for longword cas. they
-# are separated because the final write which asserts LOCKE* must
-# be an aligned write.
-casl:
-	mov.l		%a0,%a1			# make copy for plpaw1
-	mov.l		%a0,%a2			# make copy for plpaw2
-	addq.l		&0x3,%a2		# plpaw2 points to end of longword
-
-	mov.l		%a0,%d1			# byte or word misaligned?
-	btst		&0x0,%d1
-	bne.w		casl2			# byte misaligned
-
-	mov.l		%d2,%d3			# d3 = update[15:0]
-	swap		%d2			# d2 = update[31:16]
-
-# mask interrupts levels 0-6. save old mask value.
-	mov.w		%sr,%d7			# save current SR
-	ori.w		&0x0700,%sr		# inhibit interrupts
-
-# load the SFC and DFC with the appropriate mode.
-	movc		%sfc,%d6		# save old SFC/DFC
-	movc		%d0,%sfc		# load new sfc
-	movc		%d0,%dfc		# load new dfc
-
-# pre-load the operand ATC. no page faults should occur here because
-# _real_lock_page() should have taken care of this.
-	plpaw		(%a1)			# load atc for ADDR
-	plpaw		(%a2)			# load atc for ADDR+3
-
-# push the operand lines from the cache if they exist.
-	cpushl		%dc,(%a1)		# push dirty data
-	cpushl		%dc,(%a2)		# push dirty data
-
-# load the BUSCR values.
-	mov.l		&0x80000000,%a1		# assert LOCK* buscr value
-	mov.l		&0xa0000000,%a2		# assert LOCKE* buscr value
-	mov.l		&0x00000000,%a3		# buscr unlock value
-
-	bra.b		CASL_ENTER		# start pre-loading icache
-
-#
-# D0 = dst operand <-
-# D1 = xxxxxxxx
-# D2 = update[31:16] operand
-# D3 = update[15:0]  operand
-# D4 = compare[31:0] operand
-# D5 = xxxxxxxx
-# D6 = old SFC/DFC
-# D7 = old SR
-# A0 = ADDR
-# A1 = bus LOCK*  value
-# A2 = bus LOCKE* value
-# A3 = bus unlock value
-# A4 = xxxxxxxx
-# A5 = xxxxxxxx
-#
-	align		0x10
-CASL_START:
-	movc		%a1,%buscr		# assert LOCK*
-	movs.l		(%a0),%d0		# fetch Dest[31:0]
-	cmp.l		%d0,%d4			# Dest - Compare
-	bne.b		CASL_NOUPDATE
-	bra.b		CASL_UPDATE
-CASL_ENTER:
-	bra.b		~+16
-
-CASL_UPDATE:
-	movs.w		%d2,(%a0)+		# Update[31:16] -> DEST
-	movc		%a2,%buscr		# assert LOCKE*
-	movs.w		%d3,(%a0)		# Update[15:0] -> DEST+0x2
-	bra.b		CASL_UPDATE2
-	bra.b		~+16
-
-CASL_UPDATE2:
-	movc		%a3,%buscr		# unlock the bus
-	bra.b		casl_update_done
-	nop
-	nop
-	nop
-	nop
-	bra.b		~+16
-
-CASL_NOUPDATE:
-	swap		%d0			# get Dest[31:16]
-	movs.w		%d0,(%a0)+		# Dest[31:16] -> DEST
-	swap		%d0			# get Dest[15:0]
-	movc		%a2,%buscr		# assert LOCKE*
-	bra.b		CASL_NOUPDATE2
-	bra.b		~+16
-
-CASL_NOUPDATE2:
-	movs.w		%d0,(%a0)		# Dest[15:0] -> DEST+0x2
-	movc		%a3,%buscr		# unlock the bus
-	bra.b		casl_noupdate_done
-	nop
-	nop
-	bra.b		~+16
-
-CASL_FILLER:
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	bra.b		CASL_START
-
-#################################################################
-# THIS MUST BE THE STATE OF THE INTEGER REGISTER FILE UPON	#
-# CALLING _isp_cas_finish().					#
-#								#
-# D0 = destination[31:0] operand				#
-# D1 = 'xxxxxx11 -> no reg update; 'xxxxxx00 -> update required	#
-# D2 = xxxxxxxx							#
-# D3 = xxxxxxxx							#
-# D4 = compare[31:0] operand					#
-# D5 = xxxxxxxx							#
-# D6 = xxxxxxxx							#
-# D7 = xxxxxxxx							#
-# A0 = xxxxxxxx							#
-# A1 = xxxxxxxx							#
-# A2 = xxxxxxxx							#
-# A3 = xxxxxxxx							#
-# A4 = xxxxxxxx							#
-# A5 = xxxxxxxx							#
-# A6 = frame pointer						#
-# A7 = stack pointer						#
-#################################################################
-
-casl_noupdate_done:
-
-# restore previous SFC/DFC value.
-	movc		%d6,%sfc		# restore old SFC
-	movc		%d6,%dfc		# restore old DFC
-
-# restore previous interrupt mask level.
-	mov.w		%d7,%sr			# restore old SR
-
-	sf		%d1			# indicate no update was done
-	bra.l		_isp_cas_finish
-
-casl_update_done:
-
-# restore previous SFC/DFC value.
-	movc		%d6,%sfc		# restore old SFC
-	movc		%d6,%dfc		# restore old DFC
-
-# restore previous interrupts mask level.
-	mov.w		%d7,%sr			# restore old SR
-
-	st		%d1			# indicate update was done
-	bra.l		_isp_cas_finish
-
-#######################################
-casl2:
-	mov.l		%d2,%d5			# d5 = Update[7:0]
-	lsr.l		&0x8,%d2
-	mov.l		%d2,%d3			# d3 = Update[23:8]
-	swap		%d2			# d2 = Update[31:24]
-
-# mask interrupts levels 0-6. save old mask value.
-	mov.w		%sr,%d7			# save current SR
-	ori.w		&0x0700,%sr		# inhibit interrupts
-
-# load the SFC and DFC with the appropriate mode.
-	movc		%sfc,%d6		# save old SFC/DFC
-	movc		%d0,%sfc		# load new sfc
-	movc		%d0,%dfc		# load new dfc
-
-# pre-load the operand ATC. no page faults should occur here because
-# _real_lock_page() should have taken care of this already.
-	plpaw		(%a1)			# load atc for ADDR
-	plpaw		(%a2)			# load atc for ADDR+3
-
-# puch the operand lines from the cache if they exist.
-	cpushl		%dc,(%a1)		# push dirty data
-	cpushl		%dc,(%a2)		# push dirty data
-
-# load the BUSCR values.
-	mov.l		&0x80000000,%a1		# assert LOCK* buscr value
-	mov.l		&0xa0000000,%a2		# assert LOCKE* buscr value
-	mov.l		&0x00000000,%a3		# buscr unlock value
-
-# pre-load the instruction cache for the following algorithm.
-# this will minimize the number of cycles that LOCK* will be asserted.
-	bra.b		CASL2_ENTER		# start pre-loading icache
-
-#
-# D0 = dst operand <-
-# D1 = xxxxxxxx
-# D2 = update[31:24] operand
-# D3 = update[23:8]  operand
-# D4 = compare[31:0] operand
-# D5 = update[7:0]  operand
-# D6 = old SFC/DFC
-# D7 = old SR
-# A0 = ADDR
-# A1 = bus LOCK*  value
-# A2 = bus LOCKE* value
-# A3 = bus unlock value
-# A4 = xxxxxxxx
-# A5 = xxxxxxxx
-#
-	align		0x10
-CASL2_START:
-	movc		%a1,%buscr		# assert LOCK*
-	movs.l		(%a0),%d0		# fetch Dest[31:0]
-	cmp.l		%d0,%d4			# Dest - Compare
-	bne.b		CASL2_NOUPDATE
-	bra.b		CASL2_UPDATE
-CASL2_ENTER:
-	bra.b		~+16
-
-CASL2_UPDATE:
-	movs.b		%d2,(%a0)+		# Update[31:24] -> DEST
-	movs.w		%d3,(%a0)+		# Update[23:8] -> DEST+0x1
-	movc		%a2,%buscr		# assert LOCKE*
-	bra.b		CASL2_UPDATE2
-	bra.b		~+16
-
-CASL2_UPDATE2:
-	movs.b		%d5,(%a0)		# Update[7:0] -> DEST+0x3
-	movc		%a3,%buscr		# unlock the bus
-	bra.w		casl_update_done
-	nop
-	bra.b		~+16
-
-CASL2_NOUPDATE:
-	rol.l		&0x8,%d0		# get Dest[31:24]
-	movs.b		%d0,(%a0)+		# Dest[31:24] -> DEST
-	swap		%d0			# get Dest[23:8]
-	movs.w		%d0,(%a0)+		# Dest[23:8] -> DEST+0x1
-	bra.b		CASL2_NOUPDATE2
-	bra.b		~+16
-
-CASL2_NOUPDATE2:
-	rol.l		&0x8,%d0		# get Dest[7:0]
-	movc		%a2,%buscr		# assert LOCKE*
-	movs.b		%d0,(%a0)		# Dest[7:0] -> DEST+0x3
-	bra.b		CASL2_NOUPDATE3
-	nop
-	bra.b		~+16
-
-CASL2_NOUPDATE3:
-	movc		%a3,%buscr		# unlock the bus
-	bra.w		casl_noupdate_done
-	nop
-	nop
-	nop
-	bra.b		~+16
-
-CASL2_FILLER:
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	bra.b		CASL2_START
-
-####
-####
-# end label used by _isp_cas_inrange()
-	global		_CASHI
-_CASHI:
diff --git a/ANDROID_3.4.5/arch/m68k/ifpsp060/src/itest.S b/ANDROID_3.4.5/arch/m68k/ifpsp060/src/itest.S
deleted file mode 100644
index beca47e7..00000000
--- a/ANDROID_3.4.5/arch/m68k/ifpsp060/src/itest.S
+++ /dev/null
@@ -1,6386 +0,0 @@
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-MOTOROLA MICROPROCESSOR & MEMORY TECHNOLOGY GROUP
-M68000 Hi-Performance Microprocessor Division
-M68060 Software Package
-Production Release P1.00 -- October 10, 1994
-
-M68060 Software Package Copyright © 1993, 1994 Motorola Inc.  All rights reserved.
-
-THE SOFTWARE is provided on an "AS IS" basis and without warranty.
-To the maximum extent permitted by applicable law,
-MOTOROLA DISCLAIMS ALL WARRANTIES WHETHER EXPRESS OR IMPLIED,
-INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
-and any warranty against infringement with regard to the SOFTWARE
-(INCLUDING ANY MODIFIED VERSIONS THEREOF) and any accompanying written materials.
-
-To the maximum extent permitted by applicable law,
-IN NO EVENT SHALL MOTOROLA BE LIABLE FOR ANY DAMAGES WHATSOEVER
-(INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS,
-BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, OR OTHER PECUNIARY LOSS)
-ARISING OF THE USE OR INABILITY TO USE THE SOFTWARE.
-Motorola assumes no responsibility for the maintenance and support of the SOFTWARE.
-
-You are hereby granted a copyright license to use, modify, and distribute the SOFTWARE
-so long as this entire notice is retained without alteration in any modified and/or
-redistributed versions, and that such modified versions are clearly identified as such.
-No licenses are granted by implication, estoppel or otherwise under any patents
-or trademarks of Motorola, Inc.
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-#############################################
-set	SREGS,		-64
-set	IREGS,		-128
-set	SCCR,		-130
-set	ICCR,		-132
-set	TESTCTR,	-136
-set	EAMEM,		-140
-set	EASTORE,	-144
-set	DATA,		-160
-
-#############################################
-TESTTOP:
-	bra.l		_060TESTS_
-
-start_str:
-	string		"Testing 68060 ISP started:\n"
-
-pass_str:
-	string		"passed\n"
-fail_str:
-	string		" failed\n"
-
-	align		0x4
-chk_test:
-	tst.l		%d0
-	bne.b		test_fail
-test_pass:
-	pea		pass_str(%pc)
-	bsr.l		_print_str
-	addq.l		&0x4,%sp
-	rts
-test_fail:
-	mov.l		%d1,-(%sp)
-	bsr.l		_print_num
-	addq.l		&0x4,%sp
-
-	pea		fail_str(%pc)
-	bsr.l		_print_str
-	addq.l		&0x4,%sp
-	rts
-
-#############################################
-_060TESTS_:
-	link		%a6,&-160
-
-	movm.l		&0x3f3c,-(%sp)
-
-	pea		start_str(%pc)
-	bsr.l		_print_str
-	addq.l		&0x4,%sp
-
-### mul
-	clr.l		TESTCTR(%a6)
-	pea		mulul_str(%pc)
-	bsr.l		_print_str
-	addq.l		&0x4,%sp
-
-	bsr.l		mulul_0
-
-	bsr.l		chk_test
-
-### div
-	clr.l		TESTCTR(%a6)
-	pea		divul_str(%pc)
-	bsr.l		_print_str
-	addq.l		&0x4,%sp
-
-	bsr.l		divul_0
-
-	bsr.l		chk_test
-
-### cmp2
-	clr.l		TESTCTR(%a6)
-	pea		cmp2_str(%pc)
-	bsr.l		_print_str
-	addq.l		&0x4,%sp
-
-	bsr.l		cmp2_1
-
-	bsr.l		chk_test
-
-### movp
-	clr.l		TESTCTR(%a6)
-	pea		movp_str(%pc)
-	bsr.l		_print_str
-	addq.l		&0x4,%sp
-
-	bsr.l		movp_0
-
-	bsr.l		chk_test
-
-### ea
-	clr.l		TESTCTR(%a6)
-	pea		ea_str(%pc)
-	bsr.l		_print_str
-	addq.l		&0x4,%sp
-
-	mov.l		&0x2,EAMEM(%a6)
-	bsr.l		ea_0
-
-	bsr.l		chk_test
-
-### cas
-	clr.l		TESTCTR(%a6)
-	pea		cas_str(%pc)
-	bsr.l		_print_str
-	addq.l		&0x4,%sp
-
-	bsr.l		cas0
-
-	bsr.l		chk_test
-
-### cas2
-	clr.l		TESTCTR(%a6)
-	pea		cas2_str(%pc)
-	bsr.l		_print_str
-	addq.l		&0x4,%sp
-
-	bsr.l		cas20
-
-	bsr.l		chk_test
-
-###
-	movm.l		(%sp)+,&0x3cfc
-
-	unlk		%a6
-	rts
-
-#############################################
-#############################################
-
-mulul_str:
-	string		"\t64-bit multiply..."
-
-	align		0x4
-mulul_0:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	clr.l		%d1
-	mov.l		&0x99999999,%d2
-	mov.l		&0x88888888,%d3
-
-	mov.w		&0x0004,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0x7fff,IREGS(%a6)
-
-	mulu.l		%d1,%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0x7fff,SREGS(%a6)
-	clr.l		IREGS+0x8(%a6)
-	clr.l		IREGS+0xc(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-mulul_1:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	mov.l		&0x77777777,%d1
-	mov.l		&0x99999999,%d2
-	mov.l		&0x00000000,%d3
-
-	mov.w		&0x0004,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0x7fff,IREGS(%a6)
-
-	mulu.l		%d1,%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0x7fff,SREGS(%a6)
-	clr.l		IREGS+0x8(%a6)
-	clr.l		IREGS+0xc(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-mulul_2:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	mov.l		&0x00000010,%d1
-	mov.l		&0x66666666,%d2
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0x7fff,IREGS(%a6)
-
-	mulu.l		%d1,%d2:%d2
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0x7fff,SREGS(%a6)
-	mov.l		&0x00000006,IREGS+0x8(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-mulul_3:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	mov.l		&0x55555555,%d1
-	mov.l		&0x00000000,%d2
-	mov.l		&0x00000003,%d3
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0x7fff,IREGS(%a6)
-
-	mulu.l		%d1,%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0x7fff,SREGS(%a6)
-	mov.l		&0x00000000,IREGS+0x8(%a6)
-	mov.l		&0xffffffff,IREGS+0xc(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-mulul_4:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	mov.l		&0x40000000,%d1
-	mov.l		&0x00000000,%d2
-	mov.l		&0x00000004,%d3
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0x7fff,IREGS(%a6)
-
-	mulu.l		%d1,%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0x7fff,SREGS(%a6)
-	mov.l		&0x00000001,IREGS+0x8(%a6)
-	mov.l		&0x00000000,IREGS+0xc(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-mulul_5:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	mov.l		&0xffffffff,%d1
-	mov.l		&0x00000000,%d2
-	mov.l		&0xffffffff,%d3
-
-	mov.w		&0x0008,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0x7fff,IREGS(%a6)
-
-	mulu.l		%d1,%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0x7fff,SREGS(%a6)
-	mov.l		&0xfffffffe,IREGS+0x8(%a6)
-	mov.l		&0x00000001,IREGS+0xc(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-mulul_6:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	mov.l		&0x80000000,%d1
-	mov.l		&0x00000000,%d2
-	mov.l		&0xffffffff,%d3
-
-	mov.w		&0x00000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0x7fff,IREGS(%a6)
-
-	muls.l		%d1,%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0x7fff,SREGS(%a6)
-	mov.l		&0x00000000,IREGS+0x8(%a6)
-	mov.l		&0x80000000,IREGS+0xc(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-mulul_7:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	mov.l		&0x80000000,%d1
-	mov.l		&0x00000000,%d2
-	mov.l		&0x00000001,%d3
-
-	mov.w		&0x0008,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0x7fff,IREGS(%a6)
-
-	muls.l		%d1,%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0x7fff,SREGS(%a6)
-	mov.l		&0xffffffff,IREGS+0x8(%a6)
-	mov.l		&0x80000000,IREGS+0xc(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-mulul_8:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	mov.l		&0x00000001,%d1
-	mov.l		&0x00000000,%d2
-	mov.l		&0x80000000,%d3
-
-	mov.w		&0x0008,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0x7fff,IREGS(%a6)
-
-	muls.l		%d1,%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0x7fff,SREGS(%a6)
-	mov.l		&0xffffffff,IREGS+0x8(%a6)
-	mov.l		&0x80000000,IREGS+0xc(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-	mov.l		TESTCTR(%a6),%d1
-	clr.l		%d0
-	rts
-
-#############################################
-
-movp_str:
-	string	"\tmovep..."
-
-	align	0x4
-###############################
-# movep.w	%d0,(0x0,%a0) #
-###############################
-movp_0:
-	addq.l	&0x1,TESTCTR(%a6)
-
-	movm.l	DEF_REGS(%pc),&0x3fff
-
-	lea	DATA(%a6),%a0
-	mov.w	&0xaaaa,%d0
-	clr.b	0x0(%a0)
-	clr.b	0x2(%a0)
-
-	mov.w	&0x001f,ICCR(%a6)
-	mov.w	&0x001f,%cc
-	movm.l	&0x7fff,IREGS(%a6)
-
-	movp.w	%d0,(0x0,%a0)
-
-	mov.w	%cc,SCCR(%a6)
-	movm.l	&0x7fff,SREGS(%a6)
-
-	mov.b	0x2(%a0),%d1
-	lsl.w	&0x8,%d1
-	mov.b	0x0(%a0),%d1
-
-	cmp.w	%d0,%d1
-	bne.l	error
-
-	bsr.l	chkregs
-	tst.b	%d0
-	bne.l	error
-
-###############################
-# movep.w	%d0,(0x0,%a0) #
-###############################
-movp_1:
-	addq.l	&0x1,TESTCTR(%a6)
-
-	movm.l	DEF_REGS(%pc),&0x3fff
-
-	lea	DATA+0x4(%a6),%a0
-	mov.w	&0xaaaa,%d0
-	clr.l	-0x4(%a0)
-	clr.l	(%a0)
-	clr.l	0x4(%a0)
-
-	mov.w	&0x001f,ICCR(%a6)
-	mov.w	&0x001f,%cc
-	movm.l	&0x7fff,IREGS(%a6)
-
-	movp.w	%d0,(0x0,%a0)
-
-	mov.w	%cc,SCCR(%a6)
-	movm.l	&0x7fff,SREGS(%a6)
-
-	tst.l	-0x4(%a0)
-	bne.l	error
-	tst.l	0x4(%a0)
-	bne.l	error
-	cmpi.l	(%a0),&0xaa00aa00
-	bne.l	error
-
-	bsr.l	chkregs
-	tst.b	%d0
-	bne.l	error
-
-#####################################################
-# movep.w	%d0,(0x0,%a0)			    #
-#	- this test has %cc initially equal to zero #
-#####################################################
-movp_2:
-	addq.l	&0x1,TESTCTR(%a6)
-
-	movm.l	DEF_REGS(%pc),&0x3fff
-
-	lea	DATA(%a6),%a0
-	mov.w	&0xaaaa,%d0
-	clr.b	0x0(%a0)
-	clr.b	0x2(%a0)
-
-	mov.w	&0x0000,ICCR(%a6)
-	mov.w	&0x0000,%cc
-	movm.l	&0x7fff,IREGS(%a6)
-
-	movp.w	%d0,(0x0,%a0)
-
-	mov.w	%cc,SCCR(%a6)
-	movm.l	&0x7fff,SREGS(%a6)
-
-	mov.b	0x2(%a0),%d1
-	lsl.w	&0x8,%d1
-	mov.b	0x0(%a0),%d1
-
-	cmp.w	%d0,%d1
-	bne.l	error
-
-	bsr.l	chkregs
-	tst.b	%d0
-	bne.l	error
-
-###############################
-# movep.w	(0x0,%a0),%d0 #
-###############################
-movp_3:
-	addq.l	&0x1,TESTCTR(%a6)
-
-	movm.l	DEF_REGS(%pc),&0x3fff
-
-	lea	DATA(%a6),%a0
-	mov.b	&0xaa,0x0(%a0)
-	mov.b	&0xaa,0x2(%a0)
-
-	mov.w	&0x001f,ICCR(%a6)
-	mov.w	&0x001f,%cc
-	movm.l	&0x7fff,IREGS(%a6)
-
-	movp.w	(0x0,%a0),%d0
-
-	mov.w	%cc,SCCR(%a6)
-	movm.l	&0x7fff,SREGS(%a6)
-	mov.w	&0xaaaa,IREGS+0x2(%a6)
-
-	mov.w	&0xaaaa,%d1
-
-	cmp.w	%d0,%d1
-	bne.l	error
-
-	bsr.l	chkregs
-	tst.b	%d0
-	bne.l	error
-
-###############################
-# movep.l	%d0,(0x0,%a0) #
-###############################
-movp_4:
-	addq.l	&0x1,TESTCTR(%a6)
-
-	movm.l	DEF_REGS(%pc),&0x3fff
-
-	lea	DATA(%a6),%a0
-	mov.l	&0xaaaaaaaa,%d0
-	clr.b	0x0(%a0)
-	clr.b	0x2(%a0)
-	clr.b	0x4(%a0)
-	clr.b	0x6(%a0)
-
-	mov.w	&0x001f,ICCR(%a6)
-	mov.w	&0x001f,%cc
-	movm.l	&0x7fff,IREGS(%a6)
-
-	movp.l	%d0,(0x0,%a0)
-
-	mov.w	%cc,SCCR(%a6)
-	movm.l	&0x7fff,SREGS(%a6)
-
-	mov.b	0x6(%a0),%d1
-	lsl.l	&0x8,%d1
-	mov.b	0x4(%a0),%d1
-	lsl.l	&0x8,%d1
-	mov.b	0x2(%a0),%d1
-	lsl.l	&0x8,%d1
-	mov.b	0x0(%a0),%d1
-
-	cmp.l	%d0,%d1
-	bne.l	error
-
-	bsr.l	chkregs
-	tst.b	%d0
-	bne.l	error
-
-###############################
-# movep.l	%d0,(0x0,%a0) #
-###############################
-movp_5:
-	addq.l	&0x1,TESTCTR(%a6)
-
-	movm.l	DEF_REGS(%pc),&0x3fff
-
-	lea	DATA+0x4(%a6),%a0
-	mov.l	&0xaaaaaaaa,%d0
-	clr.l	-0x4(%a0)
-	clr.l	(%a0)
-	clr.l	0x4(%a0)
-	clr.l	0x8(%a0)
-
-	mov.w	&0x001f,ICCR(%a6)
-	mov.w	&0x001f,%cc
-	movm.l	&0x7fff,IREGS(%a6)
-
-	movp.l	%d0,(0x0,%a0)
-
-	mov.w	%cc,SCCR(%a6)
-	movm.l	&0x7fff,SREGS(%a6)
-
-	tst.l	-0x4(%a0)
-	bne.l	error
-	tst.l	0x8(%a0)
-	bne.l	error
-	cmpi.l	(%a0),&0xaa00aa00
-	bne.l	error
-	cmpi.l	0x4(%a0),&0xaa00aa00
-	bne.l	error
-
-	bsr.l	chkregs
-	tst.b	%d0
-	bne.l	error
-
-###############################
-# movep.l	(0x0,%a0),%d0 #
-###############################
-movp_6:
-	addq.l	&0x1,TESTCTR(%a6)
-
-	movm.l	DEF_REGS(%pc),&0x3fff
-
-	lea	DATA(%a6),%a0
-	mov.b	&0xaa,0x0(%a0)
-	mov.b	&0xaa,0x2(%a0)
-	mov.b	&0xaa,0x4(%a0)
-	mov.b	&0xaa,0x6(%a0)
-
-	mov.w	&0x001f,ICCR(%a6)
-	mov.w	&0x001f,%cc
-	movm.l	&0x7fff,IREGS(%a6)
-
-	movp.l	(0x0,%a0),%d0
-
-	mov.w	%cc,SCCR(%a6)
-	movm.l	&0x7fff,SREGS(%a6)
-	mov.l	&0xaaaaaaaa,IREGS(%a6)
-
-	mov.l	&0xaaaaaaaa,%d1
-
-	cmp.l	%d0,%d1
-	bne.l	error
-
-	bsr.l	chkregs
-	tst.b	%d0
-	bne.l	error
-
-###############################
-# movep.w	%d7,(0x0,%a0) #
-###############################
-movp_7:
-	addq.l	&0x1,TESTCTR(%a6)
-
-	movm.l	DEF_REGS(%pc),&0x3fff
-
-	lea	DATA(%a6),%a0
-	mov.w	&0xaaaa,%d7
-	clr.b	0x0(%a0)
-	clr.b	0x2(%a0)
-
-	mov.w	&0x001f,ICCR(%a6)
-	mov.w	&0x001f,%cc
-	movm.l	&0x7fff,IREGS(%a6)
-
-	movp.w	%d7,(0x0,%a0)
-
-	mov.w	%cc,SCCR(%a6)
-	movm.l	&0x7fff,SREGS(%a6)
-
-	mov.b	0x2(%a0),%d1
-	lsl.w	&0x8,%d1
-	mov.b	0x0(%a0),%d1
-
-	cmp.w	%d7,%d1
-	bne.l	error
-
-	bsr.l	chkregs
-	tst.b	%d0
-	bne.l	error
-
-###############################
-# movep.w	(0x0,%a0),%d7 #
-###############################
-movp_8:
-	addq.l	&0x1,TESTCTR(%a6)
-
-	movm.l	DEF_REGS(%pc),&0x3fff
-
-	lea	DATA(%a6),%a0
-	mov.b	&0xaa,0x0(%a0)
-	mov.b	&0xaa,0x2(%a0)
-
-	mov.w	&0x001f,ICCR(%a6)
-	mov.w	&0x001f,%cc
-	movm.l	&0x7fff,IREGS(%a6)
-
-	movp.w	(0x0,%a0),%d7
-
-	mov.w	%cc,SCCR(%a6)
-	movm.l	&0x7fff,SREGS(%a6)
-	mov.w	&0xaaaa,IREGS+30(%a6)
-
-	mov.w	&0xaaaa,%d1
-
-	cmp.w	%d7,%d1
-	bne.l	error
-
-	bsr.l	chkregs
-	tst.b	%d0
-	bne.l	error
-
-###############################
-# movep.w	%d0,(0x0,%a0) #
-###############################
-movp_9:
-	addq.l	&0x1,TESTCTR(%a6)
-
-	movm.l	DEF_REGS(%pc),&0x3fff
-
-	lea	DATA(%a6),%a0
-	mov.w	&0xaaaa,%d0
-	clr.b	0x0(%a0)
-	clr.b	0x2(%a0)
-
-	mov.w	&0x001f,ICCR(%a6)
-	mov.w	&0x001f,%cc
-	movm.l	&0x7fff,IREGS(%a6)
-
-	movp.w	%d0,(0x0,%a0)
-
-	mov.w	%cc,SCCR(%a6)
-	movm.l	&0x7fff,SREGS(%a6)
-
-	mov.b	0x2(%a0),%d1
-	lsl.w	&0x8,%d1
-	mov.b	0x0(%a0),%d1
-
-	cmp.w	%d0,%d1
-	bne.l	error
-
-	bsr.l	chkregs
-	tst.b	%d0
-	bne.l	error
-
-###############################
-# movep.w	%d0,(0x8,%a0) #
-###############################
-movp_10:
-	addq.l	&0x1,TESTCTR(%a6)
-
-	movm.l	DEF_REGS(%pc),&0x3fff
-
-	lea	DATA(%a6),%a0
-	mov.w	&0xaaaa,%d0
-	clr.b	0x0+0x8(%a0)
-	clr.b	0x2+0x8(%a0)
-
-	mov.w	&0x001f,ICCR(%a6)
-	mov.w	&0x1f,%cc
-	movm.l	&0x7fff,IREGS(%a6)
-
-	movp.w	%d0,(0x8,%a0)
-
-	mov.w	%cc,SCCR(%a6)
-	movm.l	&0x7fff,SREGS(%a6)
-
-	mov.b	0x2+0x8(%a0),%d1
-	lsl.w	&0x8,%d1
-	mov.b	0x0+0x8(%a0),%d1
-
-	cmp.w	%d0,%d1
-	bne.l	error
-
-	bsr.l	chkregs
-	tst.b	%d0
-	bne.l	error
-
-###############################
-# movep.w	(0x8,%a0),%d0 #
-###############################
-movp_11:
-	addq.l	&0x1,TESTCTR(%a6)
-
-	movm.l	DEF_REGS(%pc),&0x3fff
-
-	lea	DATA(%a6),%a0
-	mov.b	&0xaa,0x0+0x8(%a0)
-	mov.b	&0xaa,0x2+0x8(%a0)
-
-	mov.w	&0x001f,ICCR(%a6)
-	mov.w	&0x1f,%cc
-	movm.l	&0x7fff,IREGS(%a6)
-
-	movp.w	(0x8,%a0),%d0
-
-	mov.w	%cc,SCCR(%a6)
-	movm.l	&0x7fff,SREGS(%a6)
-	mov.w	&0xaaaa,IREGS+0x2(%a6)
-
-	mov.w	&0xaaaa,%d1
-
-	cmp.w	%d0,%d1
-	bne.l	error
-
-	bsr.l	chkregs
-	tst.b	%d0
-	bne.l	error
-
-###############################
-# movep.l	%d0,(0x8,%a0) #
-###############################
-movp_12:
-	addq.l	&0x1,TESTCTR(%a6)
-
-	movm.l	DEF_REGS(%pc),&0x3fff
-
-	lea	DATA(%a6),%a0
-	mov.l	&0xaaaaaaaa,%d0
-	clr.b	0x0+0x8(%a0)
-	clr.b	0x2+0x8(%a0)
-	clr.b	0x4+0x8(%a0)
-	clr.b	0x6+0x8(%a0)
-
-	mov.w	&0x001f,ICCR(%a6)
-	mov.w	&0x1f,%cc
-	movm.l	&0x7fff,IREGS(%a6)
-
-	movp.l	%d0,(0x8,%a0)
-
-	mov.w	%cc,SCCR(%a6)
-	movm.l	&0x7fff,SREGS(%a6)
-
-	mov.b	0x6+0x8(%a0),%d1
-	lsl.l	&0x8,%d1
-	mov.b	0x4+0x8(%a0),%d1
-	lsl.l	&0x8,%d1
-	mov.b	0x2+0x8(%a0),%d1
-	lsl.l	&0x8,%d1
-	mov.b	0x0+0x8(%a0),%d1
-
-	cmp.l	%d0,%d1
-	bne.l	error
-
-	bsr.l	chkregs
-	tst.b	%d0
-	bne.l	error
-
-###############################
-# movep.l	(0x8,%a0),%d0 #
-###############################
-movp_13:
-	addq.l	&0x1,TESTCTR(%a6)
-
-	movm.l	DEF_REGS(%pc),&0x3fff
-
-	lea	DATA(%a6),%a0
-	mov.b	&0xaa,0x0+0x8(%a0)
-	mov.b	&0xaa,0x2+0x8(%a0)
-	mov.b	&0xaa,0x4+0x8(%a0)
-	mov.b	&0xaa,0x6+0x8(%a0)
-
-	mov.w	&0x001f,ICCR(%a6)
-	mov.w	&0x1f,%cc
-	movm.l	&0x7fff,IREGS(%a6)
-
-	movp.l	(0x8,%a0),%d0
-
-	mov.w	%cc,SCCR(%a6)
-	movm.l	&0x7fff,SREGS(%a6)
-	mov.l	&0xaaaaaaaa,IREGS(%a6)
-
-	mov.l	&0xaaaaaaaa,%d1
-
-	cmp.l	%d0,%d1
-	bne.l	error
-
-	bsr.l	chkregs
-	tst.b	%d0
-	bne.l	error
-
-################################
-# movep.w	%d0,(-0x8,%a0) #
-################################
-movp_14:
-	addq.l	&0x1,TESTCTR(%a6)
-
-	movm.l	DEF_REGS(%pc),&0x3fff
-
-	lea	DATA+0x8(%a6),%a0
-	mov.w	&0xaaaa,%d0
-	clr.b	0x0-0x8(%a0)
-	clr.b	0x2-0x8(%a0)
-
-	mov.w	&0x001f,ICCR(%a6)
-	mov.w	&0x1f,%cc
-	movm.l	&0x7fff,IREGS(%a6)
-
-	movp.w	%d0,(-0x8,%a0)
-
-	mov.w	%cc,SCCR(%a6)
-	movm.l	&0x7fff,SREGS(%a6)
-
-	mov.b	0x2-0x8(%a0),%d1
-	lsl.w	&0x8,%d1
-	mov.b	0x0-0x8(%a0),%d1
-
-	cmp.w	%d0,%d1
-	bne.l	error
-
-	bsr.l	chkregs
-	tst.b	%d0
-	bne.l	error
-
-################################
-# movep.w	(-0x8,%a0),%d0 #
-################################
-movp_15:
-	addq.l	&0x1,TESTCTR(%a6)
-
-	movm.l	DEF_REGS(%pc),&0x3fff
-
-	lea	DATA+0x8(%a6),%a0
-	mov.b	&0xaa,0x0-0x8(%a0)
-	mov.b	&0xaa,0x2-0x8(%a0)
-
-	mov.w	&0x001f,ICCR(%a6)
-	mov.w	&0x1f,%cc
-	movm.l	&0x7fff,IREGS(%a6)
-
-	movp.w	(-0x8,%a0),%d0
-
-	mov.w	%cc,SCCR(%a6)
-	movm.l	&0x7fff,SREGS(%a6)
-	mov.w	&0xaaaa,IREGS+0x2(%a6)
-
-	mov.w	&0xaaaa,%d1
-
-	cmp.w	%d0,%d1
-	bne.l	error
-
-	bsr.l	chkregs
-	tst.b	%d0
-	bne.l	error
-
-################################
-# movep.l	%d0,(-0x8,%a0) #
-################################
-movp_16:
-	addq.l	&0x1,TESTCTR(%a6)
-
-	movm.l	DEF_REGS(%pc),&0x3fff
-
-	lea	DATA+0x8(%a6),%a0
-	mov.l	&0xaaaaaaaa,%d0
-	clr.b	0x0-0x8(%a0)
-	clr.b	0x2-0x8(%a0)
-	clr.b	0x4-0x8(%a0)
-	clr.b	0x8-0x8(%a0)
-
-	mov.w	&0x001f,ICCR(%a6)
-	mov.w	&0x1f,%cc
-	movm.l	&0x7fff,IREGS(%a6)
-
-	movp.l	%d0,(-0x8,%a0)
-
-	mov.w	%cc,SCCR(%a6)
-	movm.l	&0x7fff,SREGS(%a6)
-
-	mov.b	0x6-0x8(%a0),%d1
-	lsl.l	&0x8,%d1
-	mov.b	0x4-0x8(%a0),%d1
-	lsl.l	&0x8,%d1
-	mov.b	0x2-0x8(%a0),%d1
-	lsl.l	&0x8,%d1
-	mov.b	0x0-0x8(%a0),%d1
-
-	cmp.l	%d0,%d1
-	bne.l	error
-
-	bsr.l	chkregs
-	tst.b	%d0
-	bne.l	error
-
-################################
-# movep.l	(-0x8,%a0),%d0 #
-################################
-movp_17:
-	addq.l	&0x1,TESTCTR(%a6)
-
-	movm.l	DEF_REGS(%pc),&0x3fff
-
-	lea	DATA+0x8(%a6),%a0
-	mov.b	&0xaa,0x0-0x8(%a0)
-	mov.b	&0xaa,0x2-0x8(%a0)
-	mov.b	&0xaa,0x4-0x8(%a0)
-	mov.b	&0xaa,0x8-0x8(%a0)
-
-	mov.w	&0x001f,ICCR(%a6)
-	mov.w	&0x1f,%cc
-	movm.l	&0x7fff,IREGS(%a6)
-
-	movp.l	(-0x8,%a0),%d0
-
-	mov.w	%cc,SCCR(%a6)
-	movm.l	&0x7fff,SREGS(%a6)
-	mov.l	&0xaaaaaaaa,IREGS(%a6)
-
-	mov.l	&0xaaaaaaaa,%d1
-
-	cmp.l	%d0,%d1
-	bne.l	error
-
-	bsr.l	chkregs
-	tst.b	%d0
-	bne.l	error
-
-	mov.l	TESTCTR(%a6),%d1
-	clr.l	%d0
-	rts
-
-###########################################################
-
-divul_str:
-	string		"\t64-bit divide..."
-
-	align		0x4
-divul_0:
-	addq.l		&0x1,TESTCTR(%a6)
-
-#	movm.l		DEF_REGS(%pc),&0x3fff
-
-#	clr.l		%d1
-#	mov.l		&0x99999999,%d2
-#	mov.l		&0x88888888,%d3
-
-#	mov.w		&0x001e,ICCR(%a6)
-#	mov.w		&0x001f,%cc
-#	movm.l		&0x7fff,IREGS(%a6)
-
-#	divu.l		%d1,%d2:%d3
-
-#	mov.w		%cc,SCCR(%a6)
-#	movm.l		&0x7fff,SREGS(%a6)
-
-#	bsr.l		chkregs
-#	tst.b		%d0
-#	bne.l		error
-
-divul_1:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	mov.l		&0x00000001,%d1
-	mov.l		&0x00000000,%d2
-	mov.l		&0x00000000,%d3
-
-	mov.w		&0x0014,ICCR(%a6)
-	mov.w		&0x001f,%cc
-	movm.l		&0x7fff,IREGS(%a6)
-
-	divu.l		%d1,%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0x7fff,SREGS(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-divul_2:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	mov.l		&0x44444444,%d1
-	mov.l		&0x00000000,%d2
-	mov.l		&0x55555555,%d3
-
-	mov.w		&0x0010,ICCR(%a6)
-	mov.w		&0x001f,%cc
-	movm.l		&0x7fff,IREGS(%a6)
-
-	divu.l		%d1,%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0x7fff,SREGS(%a6)
-	mov.l		&0x11111111,IREGS+0x8(%a6)
-	mov.l		&0x00000001,IREGS+0xc(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-divul_3:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	mov.l		&0x55555555,%d1
-	mov.l		&0x00000000,%d2
-	mov.l		&0x44444444,%d3
-
-	mov.w		&0x0014,ICCR(%a6)
-	mov.w		&0x001f,%cc
-	movm.l		&0x7fff,IREGS(%a6)
-
-	divu.l		%d1,%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0x7fff,SREGS(%a6)
-	mov.l		&0x44444444,IREGS+0x8(%a6)
-	mov.l		&0x00000000,IREGS+0xc(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-divul_4:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	mov.l		&0x11111111,%d1
-	mov.l		&0x44444444,%d2
-	mov.l		&0x44444444,%d3
-
-	mov.w		&0x001e,ICCR(%a6)
-	mov.w		&0x001d,%cc
-	movm.l		&0x7fff,IREGS(%a6)
-
-	divu.l		%d1,%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0x7fff,SREGS(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-divul_5:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	mov.l		&0xfffffffe,%d1
-	mov.l		&0x00000001,%d2
-	mov.l		&0x00000002,%d3
-
-	mov.w		&0x001e,ICCR(%a6)
-	mov.w		&0x001d,%cc
-	movm.l		&0x7fff,IREGS(%a6)
-
-	divs.l		%d1,%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0x7fff,SREGS(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-divul_6:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	mov.l		&0xfffffffe,%d1
-	mov.l		&0x00000001,%d2
-	mov.l		&0x00000000,%d3
-
-	mov.w		&0x0018,ICCR(%a6)
-	mov.w		&0x001d,%cc
-	movm.l		&0x7fff,IREGS(%a6)
-
-	divs.l		%d1,%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0x7fff,SREGS(%a6)
-	mov.l		&0x00000000,IREGS+0x8(%a6)
-	mov.l		&0x80000000,IREGS+0xc(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-divul_7:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	mov.l		&0x00000002,%d1
-	mov.l		&0x00000001,%d2
-	mov.l		&0x00000000,%d3
-
-	mov.w		&0x001e,ICCR(%a6)
-	mov.w		&0x001d,%cc
-	movm.l		&0x7fff,IREGS(%a6)
-
-	divs.l		%d1,%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0x7fff,SREGS(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-divul_8:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	mov.l		&0xffffffff,%d1
-	mov.l		&0xfffffffe,%d2
-	mov.l		&0xffffffff,%d3
-
-	mov.w		&0x0008,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0x7fff,IREGS(%a6)
-
-	divu.l		%d1,%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0x7fff,SREGS(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-divul_9:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	mov.l		&0xffffffff,%d1
-	mov.l		&0xfffffffe,%d2
-	mov.l		&0xffffffff,%d3
-
-	mov.w		&0x0008,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0x7fff,IREGS(%a6)
-
-	divu.l		&0xffffffff,%d2:%d2
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0x7fff,SREGS(%a6)
-	mov.l		&0xffffffff,IREGS+0x8(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-divul_10:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	mov.l		&0x0000ffff,%d1
-	mov.l		&0x00000001,%d2
-	mov.l		&0x55555555,%d3
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0x7fff,IREGS(%a6)
-
-	divu.l		%d1,%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0x7fff,SREGS(%a6)
-	mov.l		&0x0000aaab,IREGS+0x8(%a6)
-	mov.l		&0x00015556,IREGS+0xc(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-	mov.l		TESTCTR(%a6),%d1
-	clr.l		%d0
-	rts
-
-###########################################################
-
-cas_str:
-	string		"\tcas..."
-
-	align		0x4
-cas0:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	lea		DATA+0x1(%a6),%a0
-
-	mov.w		&0xaaaa,(%a0)
-
-	mov.w		&0xaaaa,%d1
-	mov.w		&0xbbbb,%d2
-
-	mov.w		&0x0014,ICCR(%a6)
-	mov.w		&0x0010,%cc
-	movm.l		&0x7fff,IREGS(%a6)
-
-	cas.w		%d1,%d2,(%a0)			# Dc,Du,<ea>
-
-	mov.w		%cc,SCCR(%a6)
-	mov.w		(%a0),%d3
-	mov.w		&0xbbbb,IREGS+0xc+0x2(%a6)
-	movm.l		&0x7fff,SREGS(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-cas1:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	lea		DATA+0x1(%a6),%a0
-
-	mov.w		&0xeeee,(%a0)
-
-	mov.w		&0x0000aaaa,%d1
-	mov.w		&0x0000bbbb,%d2
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0x7fff,IREGS(%a6)
-
-	cas.w		%d1,%d2,(%a0)			# Dc,Du,<ea>
-
-	mov.w		%cc,SCCR(%a6)
-	mov.w		(%a0),%d3
-	mov.w		&0xeeee,IREGS+0x4+0x2(%a6)
-	mov.w		&0xeeee,IREGS+0xc+0x2(%a6)
-	movm.l		&0x7fff,SREGS(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-cas2:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	lea		DATA+0x2(%a6),%a0
-
-	mov.l		&0xaaaaaaaa,(%a0)
-
-	mov.l		&0xaaaaaaaa,%d1
-	mov.l		&0xbbbbbbbb,%d2
-
-	mov.w		&0x0004,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0x7fff,IREGS(%a6)
-
-	cas.l		%d1,%d2,(%a0)			# Dc,Du,<ea>
-
-	mov.w		%cc,SCCR(%a6)
-	mov.l		(%a0),%d3
-	mov.l		&0xbbbbbbbb,IREGS+0xc(%a6)
-	movm.l		&0x7fff,SREGS(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-cas3:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	lea		DATA+0x2(%a6),%a0
-
-	mov.l		&0xeeeeeeee,(%a0)
-
-	mov.l		&0xaaaaaaaa,%d1
-	mov.l		&0xbbbbbbbb,%d2
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0x7fff,IREGS(%a6)
-
-	cas.l		%d1,%d2,(%a0)			# Dc,Du,<ea>
-
-	mov.w		%cc,SCCR(%a6)
-	mov.l		(%a0),%d3
-	mov.l		&0xeeeeeeee,IREGS+0x4(%a6)
-	mov.l		&0xeeeeeeee,IREGS+0xc(%a6)
-	movm.l		&0x7fff,SREGS(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-cas4:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	lea		DATA+0x1(%a6),%a0
-
-	mov.l		&0xaaaaaaaa,(%a0)
-
-	mov.l		&0xaaaaaaaa,%d1
-	mov.l		&0xbbbbbbbb,%d2
-
-	mov.w		&0x0004,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0x7fff,IREGS(%a6)
-
-	cas.l		%d1,%d2,(%a0)			# Dc,Du,<ea>
-
-	mov.w		%cc,SCCR(%a6)
-	mov.l		(%a0),%d3
-	mov.l		&0xbbbbbbbb,IREGS+0xc(%a6)
-	movm.l		&0x7fff,SREGS(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-cas5:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	lea		DATA+0x1(%a6),%a0
-
-	mov.l		&0x7fffffff,(%a0)
-
-	mov.l		&0x80000000,%d1
-	mov.l		&0xbbbbbbbb,%d2
-
-	mov.w		&0x001b,ICCR(%a6)
-	mov.w		&0x0010,%cc
-	movm.l		&0x7fff,IREGS(%a6)
-
-	cas.l		%d1,%d2,(%a0)			# Dc,Du,<ea>
-
-	mov.w		%cc,SCCR(%a6)
-	mov.l		(%a0),%d3
-	mov.l		&0x7fffffff,IREGS+0x4(%a6)
-	mov.l		&0x7fffffff,IREGS+0xc(%a6)
-	movm.l		&0x7fff,SREGS(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-	mov.l		TESTCTR(%a6),%d1
-	clr.l		%d0
-	rts
-
-###########################################################
-
-cas2_str:
-	string		"\tcas2..."
-
-	align		0x4
-cas20:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	lea		DATA+0x0(%a6),%a0
-	lea		DATA+0x4(%a6),%a1
-
-	mov.l		&0xaaaaaaaa,(%a0)
-	mov.l		&0xbbbbbbbb,(%a1)
-
-	mov.l		&0xaaaaaaaa,%d1
-	mov.l		&0xbbbbbbbb,%d2
-	mov.l		&0xcccccccc,%d3
-	mov.l		&0xdddddddd,%d4
-
-	mov.w		&0x0014,ICCR(%a6)
-	mov.w		&0x0010,%cc
-	movm.l		&0x7fff,IREGS(%a6)
-
-	cas2.l		%d1:%d2,%d3:%d4,(%a0):(%a1)	# Dc1:Dc2,Du1:Du2,(Rn1):(Rn2)
-
-	mov.w		%cc,SCCR(%a6)
-	mov.l		(%a0),%d5
-	mov.l		(%a1),%d6
-	mov.l		&0xcccccccc,IREGS+0x14(%a6)
-	mov.l		&0xdddddddd,IREGS+0x18(%a6)
-	movm.l		&0x7fff,SREGS(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-cas21:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	lea		DATA+0x1(%a6),%a0
-	lea		DATA+0x5(%a6),%a1
-
-	mov.l		&0xaaaaaaaa,(%a0)
-	mov.l		&0xbbbbbbbb,(%a1)
-
-	mov.l		&0xaaaaaaaa,%d1
-	mov.l		&0xbbbbbbbb,%d2
-	mov.l		&0xcccccccc,%d3
-	mov.l		&0xdddddddd,%d4
-
-	mov.w		&0x0014,ICCR(%a6)
-	mov.w		&0x0010,%cc
-	movm.l		&0x7fff,IREGS(%a6)
-
-	cas2.l		%d1:%d2,%d3:%d4,(%a0):(%a1)	# Dc1:Dc2,Du1:Du2,(Rn1):(Rn2)
-
-	mov.w		%cc,SCCR(%a6)
-	mov.l		(%a0),%d5
-	mov.l		(%a1),%d6
-	mov.l		&0xcccccccc,IREGS+0x14(%a6)
-	mov.l		&0xdddddddd,IREGS+0x18(%a6)
-	movm.l		&0x7fff,SREGS(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-cas22:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	lea		DATA+0x2(%a6),%a0
-	lea		DATA+0x6(%a6),%a1
-
-	mov.l		&0xaaaaaaaa,(%a0)
-	mov.l		&0xbbbbbbbb,(%a1)
-
-	mov.l		&0xaaaaaaaa,%d1
-	mov.l		&0xbbbbbbbb,%d2
-	mov.l		&0xcccccccc,%d3
-	mov.l		&0xdddddddd,%d4
-
-	mov.w		&0x0014,ICCR(%a6)
-	mov.w		&0x0010,%cc
-	movm.l		&0x7fff,IREGS(%a6)
-
-	cas2.l		%d1:%d2,%d3:%d4,(%a0):(%a1)	# Dc1:Dc2,Du1:Du2,(Rn1):(Rn2)
-
-	mov.w		%cc,SCCR(%a6)
-	mov.l		(%a0),%d5
-	mov.l		(%a1),%d6
-	mov.l		&0xcccccccc,IREGS+0x14(%a6)
-	mov.l		&0xdddddddd,IREGS+0x18(%a6)
-	movm.l		&0x7fff,SREGS(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-cas23:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	lea		DATA+0x0(%a6),%a0
-	lea		DATA+0x4(%a6),%a1
-
-	mov.l		&0xeeeeeeee,(%a0)
-	mov.l		&0xbbbbbbbb,(%a1)
-
-	mov.l		&0xaaaaaaaa,%d1
-	mov.l		&0xbbbbbbbb,%d2
-	mov.l		&0xcccccccc,%d3
-	mov.l		&0xdddddddd,%d4
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0x7fff,IREGS(%a6)
-
-	cas2.l		%d1:%d2,%d3:%d4,(%a0):(%a1)	# Dc1:Dc2,Du1:Du2,(Rn1):(Rn2)
-
-	mov.w		%cc,SCCR(%a6)
-	mov.l		(%a0),%d5
-	mov.l		(%a1),%d6
-	mov.l		&0xeeeeeeee,IREGS+0x4(%a6)
-	mov.l		&0xbbbbbbbb,IREGS+0x8(%a6)
-	mov.l		&0xeeeeeeee,IREGS+0x14(%a6)
-	mov.l		&0xbbbbbbbb,IREGS+0x18(%a6)
-	movm.l		&0x7fff,SREGS(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-cas24:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	lea		DATA+0x1(%a6),%a0
-	lea		DATA+0x5(%a6),%a1
-
-	mov.l		&0xeeeeeeee,(%a0)
-	mov.l		&0xbbbbbbbb,(%a1)
-
-	mov.l		&0xaaaaaaaa,%d1
-	mov.l		&0xbbbbbbbb,%d2
-	mov.l		&0xcccccccc,%d3
-	mov.l		&0xdddddddd,%d4
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0x7fff,IREGS(%a6)
-
-	cas2.l		%d1:%d2,%d3:%d4,(%a0):(%a1)	# Dc1:Dc2,Du1:Du2,(Rn1):(Rn2)
-
-	mov.w		%cc,SCCR(%a6)
-	mov.l		(%a0),%d5
-	mov.l		(%a1),%d6
-	mov.l		&0xeeeeeeee,IREGS+0x4(%a6)
-	mov.l		&0xbbbbbbbb,IREGS+0x8(%a6)
-	mov.l		&0xeeeeeeee,IREGS+0x14(%a6)
-	mov.l		&0xbbbbbbbb,IREGS+0x18(%a6)
-	movm.l		&0x7fff,SREGS(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-cas25:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	lea		DATA+0x2(%a6),%a0
-	lea		DATA+0x6(%a6),%a1
-
-	mov.l		&0xeeeeeeee,(%a0)
-	mov.l		&0xbbbbbbbb,(%a1)
-
-	mov.l		&0xaaaaaaaa,%d1
-	mov.l		&0xbbbbbbbb,%d2
-	mov.l		&0xcccccccc,%d3
-	mov.l		&0xdddddddd,%d4
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0x7fff,IREGS(%a6)
-
-	cas2.l		%d1:%d2,%d3:%d4,(%a0):(%a1)	# Dc1:Dc2,Du1:Du2,(Rn1):(Rn2)
-
-	mov.w		%cc,SCCR(%a6)
-	mov.l		(%a0),%d5
-	mov.l		(%a1),%d6
-	mov.l		&0xeeeeeeee,IREGS+0x4(%a6)
-	mov.l		&0xbbbbbbbb,IREGS+0x8(%a6)
-	mov.l		&0xeeeeeeee,IREGS+0x14(%a6)
-	mov.l		&0xbbbbbbbb,IREGS+0x18(%a6)
-	movm.l		&0x7fff,SREGS(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-cas26:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	lea		DATA+0x0(%a6),%a0
-	lea		DATA+0x4(%a6),%a1
-
-	mov.l		&0xaaaaaaaa,(%a0)
-	mov.l		&0xeeeeeeee,(%a1)
-
-	mov.l		&0xaaaaaaaa,%d1
-	mov.l		&0xbbbbbbbb,%d2
-	mov.l		&0xcccccccc,%d3
-	mov.l		&0xdddddddd,%d4
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0x7fff,IREGS(%a6)
-
-	cas2.l		%d1:%d2,%d3:%d4,(%a0):(%a1)	# Dc1:Dc2,Du1:Du2,(Rn1):(Rn2)
-
-	mov.w		%cc,SCCR(%a6)
-	mov.l		(%a0),%d5
-	mov.l		(%a1),%d6
-	mov.l		&0xaaaaaaaa,IREGS+0x4(%a6)
-	mov.l		&0xeeeeeeee,IREGS+0x8(%a6)
-	mov.l		&0xaaaaaaaa,IREGS+0x14(%a6)
-	mov.l		&0xeeeeeeee,IREGS+0x18(%a6)
-	movm.l		&0x7fff,SREGS(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-cas27:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	lea		DATA+0x1(%a6),%a0
-	lea		DATA+0x5(%a6),%a1
-
-	mov.l		&0xaaaaaaaa,(%a0)
-	mov.l		&0xeeeeeeee,(%a1)
-
-	mov.l		&0xaaaaaaaa,%d1
-	mov.l		&0xbbbbbbbb,%d2
-	mov.l		&0xcccccccc,%d3
-	mov.l		&0xdddddddd,%d4
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0x7fff,IREGS(%a6)
-
-	cas2.l		%d1:%d2,%d3:%d4,(%a0):(%a1)	# Dc1:Dc2,Du1:Du2,(Rn1):(Rn2)
-
-	mov.w		%cc,SCCR(%a6)
-	mov.l		(%a0),%d5
-	mov.l		(%a1),%d6
-	mov.l		&0xaaaaaaaa,IREGS+0x4(%a6)
-	mov.l		&0xeeeeeeee,IREGS+0x8(%a6)
-	mov.l		&0xaaaaaaaa,IREGS+0x14(%a6)
-	mov.l		&0xeeeeeeee,IREGS+0x18(%a6)
-	movm.l		&0x7fff,SREGS(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-cas28:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	lea		DATA+0x2(%a6),%a0
-	lea		DATA+0x6(%a6),%a1
-
-	mov.l		&0xaaaaaaaa,(%a0)
-	mov.l		&0x7fffffff,(%a1)
-
-	mov.l		&0xaaaaaaaa,%d1
-	mov.l		&0x80000000,%d2
-	mov.l		&0xcccccccc,%d3
-	mov.l		&0xdddddddd,%d4
-
-	mov.w		&0x000b,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0x7fff,IREGS(%a6)
-
-	cas2.l		%d1:%d2,%d3:%d4,(%a0):(%a1)	# Dc1:Dc2,Du1:Du2,(Rn1):(Rn2)
-
-	mov.w		%cc,SCCR(%a6)
-	mov.l		(%a0),%d5
-	mov.l		(%a1),%d6
-	mov.l		&0xaaaaaaaa,IREGS+0x4(%a6)
-	mov.l		&0x7fffffff,IREGS+0x8(%a6)
-	mov.l		&0xaaaaaaaa,IREGS+0x14(%a6)
-	mov.l		&0x7fffffff,IREGS+0x18(%a6)
-	movm.l		&0x7fff,SREGS(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-##################################
-cas29:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	lea		DATA+0x0(%a6),%a0
-	lea		DATA+0x4(%a6),%a1
-
-	mov.w		&0xaaaa,(%a0)
-	mov.w		&0xbbbb,(%a1)
-
-	mov.w		&0xaaaa,%d1
-	mov.w		&0xbbbb,%d2
-	mov.w		&0xcccc,%d3
-	mov.w		&0xdddd,%d4
-
-	mov.w		&0x0014,ICCR(%a6)
-	mov.w		&0x0010,%cc
-	movm.l		&0x7fff,IREGS(%a6)
-
-	cas2.w		%d1:%d2,%d3:%d4,(%a0):(%a1)	# Dc1:Dc2,Du1:Du2,(Rn1):(Rn2)
-
-	mov.w		%cc,SCCR(%a6)
-	mov.w		(%a0),%d5
-	mov.w		(%a1),%d6
-	mov.w		&0xcccc,IREGS+0x14+0x2(%a6)
-	mov.w		&0xdddd,IREGS+0x18+0x2(%a6)
-	movm.l		&0x7fff,SREGS(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-cas210:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	lea		DATA+0x1(%a6),%a0
-	lea		DATA+0x5(%a6),%a1
-
-	mov.w		&0xaaaa,(%a0)
-	mov.w		&0xbbbb,(%a1)
-
-	mov.w		&0xaaaa,%d1
-	mov.w		&0xbbbb,%d2
-	mov.w		&0xcccc,%d3
-	mov.w		&0xdddd,%d4
-
-	mov.w		&0x0004,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0x7fff,IREGS(%a6)
-
-	cas2.w		%d1:%d2,%d3:%d4,(%a0):(%a1)	# Dc1:Dc2,Du1:Du2,(Rn1):(Rn2)
-
-	mov.w		%cc,SCCR(%a6)
-	mov.w		(%a0),%d5
-	mov.w		(%a1),%d6
-	mov.w		&0xcccc,IREGS+0x14+0x2(%a6)
-	mov.w		&0xdddd,IREGS+0x18+0x2(%a6)
-	movm.l		&0x7fff,SREGS(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-cas211:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	lea		DATA+0x0(%a6),%a0
-	lea		DATA+0x4(%a6),%a1
-
-	mov.w		&0xeeee,(%a0)
-	mov.w		&0xbbbb,(%a1)
-
-	mov.w		&0xaaaa,%d1
-	mov.w		&0xbbbb,%d2
-	mov.w		&0xcccc,%d3
-	mov.w		&0xdddd,%d4
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0x7fff,IREGS(%a6)
-
-	cas2.w		%d1:%d2,%d3:%d4,(%a0):(%a1)	# Dc1:Dc2,Du1:Du2,(Rn1):(Rn2)
-
-	mov.w		%cc,SCCR(%a6)
-	mov.w		(%a0),%d5
-	mov.w		(%a1),%d6
-	mov.w		&0xeeee,IREGS+0x4+0x2(%a6)
-	mov.w		&0xbbbb,IREGS+0x8+0x2(%a6)
-	mov.w		&0xeeee,IREGS+0x14+0x2(%a6)
-	mov.w		&0xbbbb,IREGS+0x18+0x2(%a6)
-	movm.l		&0x7fff,SREGS(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-cas212:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	lea		DATA+0x1(%a6),%a0
-	lea		DATA+0x5(%a6),%a1
-
-	mov.w		&0xeeee,(%a0)
-	mov.w		&0xbbbb,(%a1)
-
-	mov.w		&0xaaaa,%d1
-	mov.w		&0xbbbb,%d2
-	mov.w		&0xcccc,%d3
-	mov.w		&0xdddd,%d4
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0x7fff,IREGS(%a6)
-
-	cas2.w		%d1:%d2,%d3:%d4,(%a0):(%a1)	# Dc1:Dc2,Du1:Du2,(Rn1):(Rn2)
-
-	mov.w		%cc,SCCR(%a6)
-	mov.w		(%a0),%d5
-	mov.w		(%a1),%d6
-	mov.w		&0xeeee,IREGS+0x4+0x2(%a6)
-	mov.w		&0xbbbb,IREGS+0x8+0x2(%a6)
-	mov.w		&0xeeee,IREGS+0x14+0x2(%a6)
-	mov.w		&0xbbbb,IREGS+0x18+0x2(%a6)
-	movm.l		&0x7fff,SREGS(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-cas213:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	lea		DATA+0x0(%a6),%a0
-	lea		DATA+0x4(%a6),%a1
-
-	mov.w		&0xaaaa,(%a0)
-	mov.w		&0xeeee,(%a1)
-
-	mov.w		&0xaaaa,%d1
-	mov.w		&0xbbbb,%d2
-	mov.w		&0xcccc,%d3
-	mov.w		&0xdddd,%d4
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0x7fff,IREGS(%a6)
-
-	cas2.w		%d1:%d2,%d3:%d4,(%a0):(%a1)	# Dc1:Dc2,Du1:Du2,(Rn1):(Rn2)
-
-	mov.w		%cc,SCCR(%a6)
-	mov.w		(%a0),%d5
-	mov.w		(%a1),%d6
-	mov.w		&0xaaaa,IREGS+0x4+0x2(%a6)
-	mov.w		&0xeeee,IREGS+0x8+0x2(%a6)
-	mov.w		&0xaaaa,IREGS+0x14+0x2(%a6)
-	mov.w		&0xeeee,IREGS+0x18+0x2(%a6)
-	movm.l		&0x7fff,SREGS(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-cas214:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	lea		DATA+0x1(%a6),%a0
-	lea		DATA+0x5(%a6),%a1
-
-	mov.w		&0xaaaa,(%a0)
-	mov.w		&0x7fff,(%a1)
-
-	mov.w		&0xaaaa,%d1
-	mov.w		&0x8000,%d2
-	mov.w		&0xcccc,%d3
-	mov.w		&0xdddd,%d4
-
-	mov.w		&0x001b,ICCR(%a6)
-	mov.w		&0x0010,%cc
-	movm.l		&0x7fff,IREGS(%a6)
-
-	cas2.w		%d1:%d2,%d3:%d4,(%a0):(%a1)	# Dc1:Dc2,Du1:Du2,(Rn1):(Rn2)
-
-	mov.w		%cc,SCCR(%a6)
-	mov.w		(%a0),%d5
-	mov.w		(%a1),%d6
-	mov.w		&0xaaaa,IREGS+0x4+0x2(%a6)
-	mov.w		&0x7fff,IREGS+0x8+0x2(%a6)
-	mov.w		&0xaaaa,IREGS+0x14+0x2(%a6)
-	mov.w		&0x7fff,IREGS+0x18+0x2(%a6)
-	movm.l		&0x7fff,SREGS(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-	mov.l		TESTCTR(%a6),%d1
-	clr.l		%d0
-	rts
-
-###########################################################
-
-cmp2_str:
-	string		"\tcmp2,chk2..."
-
-	align		0x4
-# unsigned - small,small
-cmp2_1:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	mov.w		&0x2040,DATA(%a6)
-	mov.l		&0x11111120,%d1
-
-	mov.w		&0x0004,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0x7fff,IREGS(%a6)
-
-	cmp2.b		%d1,DATA(%a6)
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0x7fff,SREGS(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-cmp2_2:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	mov.w		&0x2040,DATA(%a6)
-	mov.l		&0x00000040,%a1
-
-	mov.w		&0x0004,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0x7fff,IREGS(%a6)
-
-	cmp2.b		%a1,DATA(%a6)
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0x7fff,SREGS(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-cmp2_3:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	mov.w		&0x2040,DATA(%a6)
-	mov.l		&0x11111130,%d1
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0x7fff,IREGS(%a6)
-
-	chk2.b		DATA(%a6),%d1
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0x7fff,SREGS(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-cmp2_4:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	mov.w		&0x2040,DATA(%a6)
-	mov.l		&0x00000010,%a1
-
-	mov.w		&0x0001,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0x7fff,IREGS(%a6)
-
-	cmp2.b		%a1,DATA(%a6)
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0x7fff,SREGS(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-cmp2_5:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	mov.w		&0x2040,DATA(%a6)
-	mov.l		&0x11111150,%d1
-
-	mov.w		&0x0001,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0x7fff,IREGS(%a6)
-
-	cmp2.b		%d1,DATA(%a6)
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0x7fff,SREGS(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-cmp2_6:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	mov.w		&0x2040,DATA(%a6)
-	mov.l		&0x00000090,%a1
-
-	mov.w		&0x0001,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0x7fff,IREGS(%a6)
-
-	cmp2.b		%a1,DATA(%a6)
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0x7fff,SREGS(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-# unsigned - small,large
-cmp2_7:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	mov.l		&0x2000a000,DATA(%a6)
-	mov.l		&0x11112000,%d1
-
-	mov.w		&0x0004,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0x7fff,IREGS(%a6)
-
-	cmp2.w		%d1,DATA(%a6)
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0x7fff,SREGS(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-cmp2_8:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	mov.l		&0x2000a000,DATA(%a6)
-	mov.l		&0xffffa000,%a1
-
-	mov.w		&0x0004,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0x7fff,IREGS(%a6)
-
-	cmp2.w		%a1,DATA(%a6)
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0x7fff,SREGS(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-cmp2_9:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	mov.l		&0x2000a000,DATA(%a6)
-	mov.l		&0x11113000,%d1
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0x7fff,IREGS(%a6)
-
-	chk2.w		DATA(%a6),%d1
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0x7fff,SREGS(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-cmp2_10:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	mov.l		&0x2000a000,DATA(%a6)
-	mov.l		&0xffff9000,%a1
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0x7fff,IREGS(%a6)
-
-	cmp2.w		%a1,DATA(%a6)
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0x7fff,SREGS(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-cmp2_11:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	mov.l		&0x2000a000,DATA(%a6)
-	mov.l		&0x11111000,%d1
-
-	mov.w		&0x0001,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0x7fff,IREGS(%a6)
-
-	cmp2.w		%d1,DATA(%a6)
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0x7fff,SREGS(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-cmp2_12:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	mov.l		&0x2000a000,DATA(%a6)
-	mov.l		&0xffffb000,%a1
-
-	mov.w		&0x0001,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0x7fff,IREGS(%a6)
-
-	cmp2.w		%a1,DATA(%a6)
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0x7fff,SREGS(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-# unsigned - large,large
-cmp2_13:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	mov.l		&0xa0000000,DATA(%a6)
-	mov.l		&0xc0000000,DATA+0x4(%a6)
-	mov.l		&0xa0000000,%d1
-
-	mov.w		&0x000c,ICCR(%a6)
-	mov.w		&0x0008,%cc
-	movm.l		&0x7fff,IREGS(%a6)
-
-	cmp2.l		%d1,DATA(%a6)
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0x7fff,SREGS(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-cmp2_14:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	mov.l		&0xa0000000,DATA(%a6)
-	mov.l		&0xc0000000,DATA+0x4(%a6)
-	mov.l		&0xc0000000,%a1
-
-	mov.w		&0x000c,ICCR(%a6)
-	mov.w		&0x0008,%cc
-	movm.l		&0x7fff,IREGS(%a6)
-
-	cmp2.l		%a1,DATA(%a6)
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0x7fff,SREGS(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-cmp2_15:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	mov.l		&0xa0000000,DATA(%a6)
-	mov.l		&0xc0000000,DATA+0x4(%a6)
-	mov.l		&0xb0000000,%d1
-
-	mov.w		&0x0008,ICCR(%a6)
-	mov.w		&0x0008,%cc
-	movm.l		&0x7fff,IREGS(%a6)
-
-	chk2.l		DATA(%a6),%d1
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0x7fff,SREGS(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-cmp2_16:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	mov.l		&0xa0000000,DATA(%a6)
-	mov.l		&0xc0000000,DATA+0x4(%a6)
-	mov.l		&0x10000000,%a1
-
-	mov.w		&0x0009,ICCR(%a6)
-	mov.w		&0x0008,%cc
-	movm.l		&0x7fff,IREGS(%a6)
-
-	cmp2.l		%a1,DATA(%a6)
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0x7fff,SREGS(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-cmp2_17:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	mov.l		&0xa0000000,DATA(%a6)
-	mov.l		&0xc0000000,DATA+0x4(%a6)
-	mov.l		&0x90000000,%d1
-
-	mov.w		&0x0009,ICCR(%a6)
-	mov.w		&0x0008,%cc
-	movm.l		&0x7fff,IREGS(%a6)
-
-	cmp2.l		%d1,DATA(%a6)
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0x7fff,SREGS(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-cmp2_18:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	mov.l		&0xa0000000,DATA(%a6)
-	mov.l		&0xc0000000,DATA+0x4(%a6)
-	mov.l		&0xd0000000,%a1
-
-	mov.w		&0x0009,ICCR(%a6)
-	mov.w		&0x0008,%cc
-	movm.l		&0x7fff,IREGS(%a6)
-
-	cmp2.l		%a1,DATA(%a6)
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0x7fff,SREGS(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-# signed - negative,positive
-cmp2_19:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	mov.w		&0xa040,DATA(%a6)
-	mov.l		&0x111111a0,%d1
-
-	mov.w		&0x0004,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0x7fff,IREGS(%a6)
-
-	cmp2.b		%d1,DATA(%a6)
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0x7fff,SREGS(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-cmp2_20:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	mov.w		&0xa040,DATA(%a6)
-	mov.l		&0x00000040,%a1
-
-	mov.w		&0x0004,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0x7fff,IREGS(%a6)
-
-	chk2.b		DATA(%a6),%a1
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0x7fff,SREGS(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-cmp2_21:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	mov.w		&0xa040,DATA(%a6)
-	mov.l		&0x111111b0,%d1
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0x7fff,IREGS(%a6)
-
-	cmp2.b		%d1,DATA(%a6)
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0x7fff,SREGS(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-cmp2_22:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	mov.w		&0xa040,DATA(%a6)
-	mov.l		&0x00000010,%a1
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0x7fff,IREGS(%a6)
-
-	cmp2.b		%a1,DATA(%a6)
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0x7fff,SREGS(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-cmp2_23:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	mov.w		&0xa040,DATA(%a6)
-	mov.l		&0x11111190,%d1
-
-	mov.w		&0x0001,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0x7fff,IREGS(%a6)
-
-	cmp2.b		%d1,DATA(%a6)
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0x7fff,SREGS(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-cmp2_24:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	mov.w		&0xa040,DATA(%a6)
-	mov.l		&0x00000050,%a1
-
-	mov.w		&0x0001,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0x7fff,IREGS(%a6)
-
-	cmp2.b		%a1,DATA(%a6)
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0x7fff,SREGS(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-# signed - negative,negative
-cmp2_25:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	mov.w		&0xa0c0,DATA(%a6)
-	mov.l		&0x111111a0,%d1
-
-	mov.w		&0x0004,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0x7fff,IREGS(%a6)
-
-	cmp2.b		%d1,DATA(%a6)
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0x7fff,SREGS(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-cmp2_26:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	mov.w		&0xa0c0,DATA(%a6)
-	mov.l		&0xffffffc0,%a1
-
-	mov.w		&0x0004,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0x7fff,IREGS(%a6)
-
-	cmp2.b		%a1,DATA(%a6)
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0x7fff,SREGS(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-cmp2_27:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	mov.w		&0xa0c0,DATA(%a6)
-	mov.l		&0x111111b0,%d1
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0x7fff,IREGS(%a6)
-
-	chk2.b		DATA(%a6),%d1
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0x7fff,SREGS(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-cmp2_28:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	mov.w		&0xa0c0,DATA(%a6)
-	mov.l		&0x11111190,%a1
-
-	mov.w		&0x0001,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0x7fff,IREGS(%a6)
-
-	cmp2.b		%a1,DATA(%a6)
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0x7fff,SREGS(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-cmp2_29:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	mov.w		&0xa0c0,DATA(%a6)
-	mov.l		&0x111111d0,%d1
-
-	mov.w		&0x0001,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0x7fff,IREGS(%a6)
-
-	cmp2.b		%d1,DATA(%a6)
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0x7fff,SREGS(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-cmp2_30:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	mov.w		&0xa0c0,DATA(%a6)
-	mov.l		&0x00000050,%a1
-
-	mov.w		&0x001b,ICCR(%a6)
-	mov.w		&0x001f,%cc
-	movm.l		&0x7fff,IREGS(%a6)
-
-	cmp2.b		%a1,DATA(%a6)
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0x7fff,SREGS(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-	mov.l		TESTCTR(%a6),%d1
-	clr.l		%d0
-	rts
-
-###########################################################
-
-ea_str:
-	string		"\tEffective addresses..."
-
-	align		0x4
-ea_0:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM(%a6),%a0
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a6)
-
-	mulu.l		(%a0),%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0xffff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_1:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM(%a6),%a0
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a6)
-
-	mulu.l		(%a0)+,%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0xffff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-	lea		EAMEM+0x4(%a6),%a0
-	mov.l		%a0,IREGS+0x20(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_2:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM+0x4(%a6),%a0
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a6)
-
-	mulu.l		-(%a0),%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0xffff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-	lea		EAMEM(%a6),%a0
-	mov.l		%a0,IREGS+0x20(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_3:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM+0x1000(%a6),%a0
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a6)
-
-	mulu.l		(-0x1000,%a0),%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0xffff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_4:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM-0x1000(%a6),%a0
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a6)
-
-	mulu.l		(0x1000,%a0),%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0xffff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_5:
-	addq.l		&0x1,TESTCTR(%a6)
-
-#	movm.l		DEF_REGS(%pc),&0x3fff
-
-#	clr.l		%d2
-#	mov.l		&0x00000002,%d3
-
-#	mov.w		&0x0000,ICCR(%a6)
-#	mov.w		&0x0000,%cc
-#	movm.l		&0xffff,IREGS(%a6)
-
-#	mulu.l		EAMEM.w,%d2:%d3
-
-#	mov.w		%cc,SCCR(%a6)
-#	movm.l		&0xffff,SREGS(%a6)
-#	mov.l		&0x00000004,IREGS+0xc(%a6)
-
-#	bsr.l		chkregs
-#	tst.b		%d0
-#	bne.l		error
-
-ea_6:
-	addq.l		&0x1,TESTCTR(%a6)
-
-#	movm.l		DEF_REGS(%pc),&0x3fff
-
-#	clr.l		%d2
-#	mov.l		&0x00000002,%d3
-
-#	mov.w		&0x0000,ICCR(%a6)
-#	mov.w		&0x0000,%cc
-#	movm.l		&0xffff,IREGS(%a6)
-
-#	mulu.l		EAMEM.l,%d2:%d3
-
-#	mov.w		%cc,SCCR(%a6)
-#	movm.l		&0xffff,SREGS(%a6)
-#	mov.l		&0x00000004,IREGS+0xc(%a6)
-
-#	bsr.l		chkregs
-#	tst.b		%d0
-#	bne.l		error
-
-ea_7:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a6)
-
-	mulu.l		&0x00000002,%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0xffff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_8:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	bra.b		ea_8_next
-ea_8_mem:
-	long		0x00000002
-ea_8_next:
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a6)
-
-	mulu.l		(ea_8_mem.w,%pc),%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0xffff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_9:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM+0x4(%a6),%a1
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a6)
-
-	mulu.l		-(%a1),%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0xffff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-	lea		EAMEM(%a6),%a0
-	mov.l		%a0,IREGS+0x24(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_10:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM+0x4(%a6),%a2
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a6)
-
-	mulu.l		-(%a2),%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0xffff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-	lea		EAMEM(%a6),%a0
-	mov.l		%a0,IREGS+0x28(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_11:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM+0x4(%a6),%a3
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a6)
-
-	mulu.l		-(%a3),%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0xffff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-	lea		EAMEM(%a6),%a0
-	mov.l		%a0,IREGS+0x2c(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_12:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM+0x4(%a6),%a4
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a6)
-
-	mulu.l		-(%a4),%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0xffff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-	lea		EAMEM(%a6),%a0
-	mov.l		%a0,IREGS+0x30(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_13:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM+0x4(%a6),%a5
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a6)
-
-	mulu.l		-(%a5),%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0xffff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-	lea		EAMEM(%a6),%a0
-	mov.l		%a0,IREGS+0x34(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_14:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	mov.l		%a6,%a1
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM+0x4(%a1),%a6
-
-	mov.w		&0x0000,ICCR(%a1)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a1)
-
-	mulu.l		-(%a6),%d2:%d3
-
-	mov.w		%cc,SCCR(%a1)
-	movm.l		&0xffff,SREGS(%a1)
-	mov.l		&0x00000004,IREGS+0xc(%a1)
-	lea		EAMEM(%a1),%a0
-	mov.l		%a0,IREGS+0x38(%a1)
-
-	mov.l		%a1,%a6
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_15:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	mov.l		%a7,%a0
-	lea		EAMEM+0x4(%a6),%a7
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a6)
-
-	mulu.l		-(%a7),%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0xffff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-	lea		EAMEM(%a6),%a1
-	mov.l		%a1,IREGS+0x3c(%a6)
-
-	mov.l		%a0,%a7
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_16:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM(%a6),%a0
-	mov.l		&-0x10,%d4
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a6)
-
-	mulu.l		(0x10.b,%a0,%d4.w*1),%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0xffff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_17:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM(%a6),%a0
-	mov.l		&-0x8,%d4
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a6)
-
-	mulu.l		(0x10.b,%a0,%d4.w*2),%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0xffff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_18:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM(%a6),%a0
-	mov.l		&-0x4,%d4
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a6)
-
-	mulu.l		(0x10.b,%a0,%d4.w*4),%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0xffff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_19:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM(%a6),%a0
-	mov.l		&-0x2,%d4
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a6)
-
-	mulu.l		(0x10.b,%a0,%d4.w*8),%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0xffff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_20:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM(%a6),%a0
-	mov.l		&-0x10,%d4
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a6)
-
-	mulu.l		(0x10.b,%a0,%d4.l*1),%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0xffff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_21:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM(%a6),%a0
-	mov.l		&-0x8,%d4
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a6)
-
-	mulu.l		(0x10.b,%a0,%d4.l*2),%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0xffff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_22:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM(%a6),%a0
-	mov.l		&-0x4,%d4
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a6)
-
-	mulu.l		(0x10.b,%a0,%d4.l*4),%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0xffff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_23:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM(%a6),%a0
-	mov.l		&-0x2,%d4
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a6)
-
-	mulu.l		(0x10.b,%a0,%d4.l*8),%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0xffff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_24:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM(%a6),%a0
-	mov.l		&-0x2,%a4
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a6)
-
-	mulu.l		(0x10.b,%a0,%a4.l*8),%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0xffff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_25:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM(%a6),%a0
-	mov.l		&0x2,%a4
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a6)
-
-	mulu.l		(-0x10.b,%a0,%a4.l*8),%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0xffff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_26:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM(%a6),%a1
-	mov.l		&-0x10,%d4
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a6)
-
-	mulu.l		(0x10.b,%a1,%d4.w*1),%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0xffff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_27:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM(%a6),%a2
-	mov.l		&-0x10,%d4
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a6)
-
-	mulu.l		(0x10.b,%a2,%d4.w*1),%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0xffff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_28:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM(%a6),%a3
-	mov.l		&-0x10,%d4
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a6)
-
-	mulu.l		(0x10.b,%a3,%d4.w*1),%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0xffff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_29:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM(%a6),%a4
-	mov.l		&-0x10,%d4
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a6)
-
-	mulu.l		(0x10.b,%a4,%d4.w*1),%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0xffff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_30:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM(%a6),%a5
-	mov.l		&-0x10,%d4
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a6)
-
-	mulu.l		(0x10.b,%a5,%d4.w*1),%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0xffff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_31:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	mov.l		%a6,%a1
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM(%a1),%a6
-	mov.l		&-0x10,%d4
-
-	mov.w		&0x0000,ICCR(%a1)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a1)
-
-	mulu.l		(0x10.b,%a6,%d4.w*1),%d2:%d3
-
-	mov.w		%cc,SCCR(%a1)
-	movm.l		&0xffff,SREGS(%a1)
-	mov.l		&0x00000004,IREGS+0xc(%a1)
-
-	mov.l		%a1,%a6
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_32:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	mov.l		%a7,%a0
-	lea		EAMEM(%a6),%a7
-	mov.l		&-0x10,%d4
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a6)
-
-	mulu.l		(0x10.b,%a7,%d4.w*1),%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0xffff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-
-	mov.l		%a0,%a7
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_33:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM(%a6),%a1
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a6)
-
-	mulu.l		(%a1),%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0xffff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_34:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM(%a6),%a2
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a6)
-
-	mulu.l		(%a2),%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0xffff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_35:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM(%a6),%a3
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a6)
-
-	mulu.l		(%a3),%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0xffff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_36:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM(%a6),%a4
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a6)
-
-	mulu.l		(%a4),%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0xffff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_37:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM(%a6),%a5
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a6)
-
-	mulu.l		(%a5),%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0xffff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_38:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	mov.l		%a6,%a1
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM(%a1),%a6
-
-	mov.w		&0x0000,ICCR(%a1)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a1)
-
-	mulu.l		(%a6),%d2:%d3
-
-	mov.w		%cc,SCCR(%a1)
-	movm.l		&0xffff,SREGS(%a1)
-	mov.l		&0x00000004,IREGS+0xc(%a1)
-
-	mov.l		%a1,%a6
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_39:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	mov.l		%a7,%a0
-	lea		EAMEM(%a6),%a7
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a6)
-
-	mulu.l		(%a7),%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0xffff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-
-	mov.l		%a0,%a7
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_40:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM(%a6),%a1
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a6)
-
-	mulu.l		(%a1)+,%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0xffff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-	lea		EAMEM+0x4(%a6),%a0
-	mov.l		%a0,IREGS+0x24(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_41:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM(%a6),%a2
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a6)
-
-	mulu.l		(%a2)+,%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0xffff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-	lea		EAMEM+0x4(%a6),%a0
-	mov.l		%a0,IREGS+0x28(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_42:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM(%a6),%a3
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a6)
-
-	mulu.l		(%a3)+,%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0xffff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-	lea		EAMEM+0x4(%a6),%a0
-	mov.l		%a0,IREGS+0x2c(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_43:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM(%a6),%a4
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a6)
-
-	mulu.l		(%a4)+,%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0xffff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-	lea		EAMEM+0x4(%a6),%a0
-	mov.l		%a0,IREGS+0x30(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_44:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM(%a6),%a5
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a6)
-
-	mulu.l		(%a5)+,%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0xffff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-	lea		EAMEM+0x4(%a6),%a0
-	mov.l		%a0,IREGS+0x34(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_45:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	mov.l		%a6,%a1
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM(%a1),%a6
-
-	mov.w		&0x0000,ICCR(%a1)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a1)
-
-	mulu.l		(%a6)+,%d2:%d3
-
-	mov.w		%cc,SCCR(%a1)
-	movm.l		&0xffff,SREGS(%a1)
-	mov.l		&0x00000004,IREGS+0xc(%a1)
-	lea		EAMEM+0x4(%a1),%a0
-	mov.l		%a0,IREGS+0x38(%a1)
-
-	mov.l		%a1,%a6
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_46:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	mov.l		%a7,%a0
-	lea		EAMEM(%a6),%a7
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a6)
-
-	mulu.l		(%a7)+,%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0xffff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-	lea		EAMEM+0x4(%a6),%a1
-	mov.l		%a1,IREGS+0x3c(%a6)
-
-	mov.l		%a0,%a7
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_47:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM-0x1000(%a6),%a1
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a6)
-
-	mulu.l		(0x1000,%a1),%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0xffff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_48:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM-0x1000(%a6),%a2
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a6)
-
-	mulu.l		(0x1000,%a2),%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0xffff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_49:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM-0x1000(%a6),%a3
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a6)
-
-	mulu.l		(0x1000,%a3),%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0xffff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_50:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM-0x1000(%a6),%a4
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a6)
-
-	mulu.l		(0x1000,%a4),%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0xffff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_51:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM-0x1000(%a6),%a5
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a6)
-
-	mulu.l		(0x1000,%a5),%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0xffff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_52:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	mov.l		%a6,%a1
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM-0x1000(%a1),%a6
-
-	mov.w		&0x0000,ICCR(%a1)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a1)
-
-	mulu.l		(0x1000,%a6),%d2:%d3
-
-	mov.w		%cc,SCCR(%a1)
-	movm.l		&0xffff,SREGS(%a1)
-	mov.l		&0x00000004,IREGS+0xc(%a1)
-
-	mov.l		%a1,%a6
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_53:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	mov.l		%a7,%a0
-	lea		EAMEM-0x1000(%a6),%a7
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a6)
-
-	mulu.l		(0x1000,%a7),%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0xffff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-
-	mov.l		%a0,%a7
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_54:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM+0x1000(%a6),%a0
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a6)
-
-	mulu.l		(-0x1000,%a0),%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0xffff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_55:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	bra.b		ea_55_next
-
-ea_55_data:
-	long		0x00000002
-ea_55_next:
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a6)
-
-	mulu.l		(ea_55_data.w,%pc),%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0xffff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_56:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM(%a6),%a3
-	mov.l		&-0x10,%d4
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a6)
-
-	mulu.l		(0x10.w,%a3,%d4.w*1),%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0xffff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_57:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM(%a6),%a3
-	mov.l		&-0x8,%d4
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a6)
-
-	mulu.l		(0x10.w,%a3,%d4.w*2),%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0xffff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_58:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM(%a6),%a3
-	mov.l		&-0x4,%d4
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a6)
-
-	mulu.l		(0x10.w,%a3,%d4.w*4),%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0xffff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_59:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM(%a6),%a3
-	mov.l		&-0x2,%d4
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a6)
-
-	mulu.l		(0x10.w,%a3,%d4.w*8),%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0xffff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_60:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM(%a6),%a3
-	mov.l		&-0x10,%d4
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a6)
-
-	mulu.l		(0x10.w,%a3,%d4.l*1),%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0xffff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_61:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM(%a6),%a3
-	mov.l		&-0x8,%d4
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a6)
-
-	mulu.l		(0x10.w,%a3,%d4.l*2),%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0xffff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_62:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM(%a6),%a3
-	mov.l		&-0x4,%d4
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a6)
-
-	mulu.l		(0x10.w,%a3,%d4.l*4),%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0xffff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_63:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM(%a6),%a3
-	mov.l		&-0x2,%d4
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a6)
-
-	mulu.l		(0x10.w,%a3,%d4.l*8),%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0xffff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_64:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM(%a6),%a3
-	mov.l		&0x2,%a4
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a6)
-
-	mulu.l		(-0x10.w,%a3,%a4.l*8),%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0xffff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_65:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM(%a6),%a3
-	mov.l		&0x2,%a4
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a6)
-
-	mulu.l		(0x00.w,%a3,%za4.l*8),%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0xffff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_66:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM(%a6),%a3
-	mov.l		%a3,%a4
-	add.l		&0x10,%a4
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a6)
-
-	mulu.l		(-0x10.w,%za3,%a4.l*1),%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0xffff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_67:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM(%a6),%a3
-	mov.l		&0x2,%a4
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a6)
-
-	mulu.l		(-0x10.l,%a3,%a4.l*8),%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0xffff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_68:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	bra.b		ea_68_next
-ea_68_mem:
-	long		0x00000002
-ea_68_next:
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM(%a6),%a3
-	mov.l		&-0x10,%d4
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a6)
-
-	mulu.l		(ea_68_mem+0x10.w,%pc,%d4.w*1),%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0xffff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_69:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	bra.b		ea_69_next
-ea_69_mem:
-	long		0x00000002
-ea_69_next:
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM(%a6),%a0
-	mov.l		&-0x8,%d4
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0x7fff,IREGS(%a6)
-
-	mulu.l		(ea_69_mem+0x10.w,%pc,%d4.w*2),%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0x7fff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_70:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	bra.b		ea_70_next
-ea_70_mem:
-	long		0x00000002
-ea_70_next:
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM(%a6),%a0
-	mov.l		&-0x4,%d4
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0x7fff,IREGS(%a6)
-
-	mulu.l		(ea_70_mem+0x10.w,%pc,%d4.w*4),%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0x7fff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_71:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	bra.b		ea_71_next
-ea_71_mem:
-	long		0x00000002
-ea_71_next:
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM(%a6),%a0
-	mov.l		&-0x2,%d4
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0x7fff,IREGS(%a6)
-
-	mulu.l		(ea_71_mem+0x10.w,%pc,%d4.w*8),%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0x7fff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_72:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	bra.b		ea_72_next
-ea_72_mem:
-	long		0x00000002
-ea_72_next:
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM(%a6),%a0
-	mov.l		&-0x10,%d4
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0x7fff,IREGS(%a6)
-
-	mulu.l		(ea_72_mem+0x10.w,%pc,%d4.l*1),%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0x7fff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_73:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	bra.b		ea_73_next
-ea_73_mem:
-	long		0x00000002
-ea_73_next:
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM(%a6),%a0
-	mov.l		&-0x8,%d4
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0x7fff,IREGS(%a6)
-
-	mulu.l		(ea_73_mem+0x10.w,%pc,%d4.l*2),%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0x7fff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_74:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	bra.b		ea_74_next
-ea_74_mem:
-	long		0x00000002
-ea_74_next:
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM(%a6),%a0
-	mov.l		&-0x4,%d4
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0x7fff,IREGS(%a6)
-
-	mulu.l		(ea_74_mem+0x10.w,%pc,%d4.l*4),%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0x7fff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_75:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	bra.b		ea_75_next
-ea_75_mem:
-	long		0x00000002
-ea_75_next:
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM(%a6),%a0
-	mov.l		&-0x2,%d4
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0x7fff,IREGS(%a6)
-
-	mulu.l		(ea_75_mem+0x10.w,%pc,%d4.l*8),%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0x7fff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_76:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	bra.b		ea_76_next
-ea_76_mem:
-	long		0x00000002
-ea_76_next:
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM(%a6),%a3
-	mov.l		&-0x2,%a4
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a6)
-
-	mulu.l		(ea_76_mem+0x10.w,%pc,%a4.l*8),%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0xffff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_77:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	bra.b		ea_77_next
-ea_77_mem:
-	long		0x00000002
-ea_77_next:
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM(%a6),%a3
-	mov.l		&0x2,%a4
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a6)
-
-	mulu.l		(ea_77_mem+0x00.w,%pc,%za4.l*8),%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0xffff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_78:
-	addq.l		&0x1,TESTCTR(%a6)
-
-#	movm.l		DEF_REGS(%pc),&0x3fff
-
-#	clr.l		%d2
-#	mov.l		&0x00000002,%d3
-#	lea		EAMEM,%a3
-#	mov.l		%a3,%a4
-#	add.l		&0x10,%a4
-
-#	mov.w		&0x0000,ICCR(%a6)
-#	mov.w		&0x0000,%cc
-#	movm.l		&0xffff,IREGS(%a6)
-
-#	mulu.l		(EAMEM-0x10.w,%zpc,%a4.l*1),%d2:%d3
-
-#	mov.w		%cc,SCCR(%a6)
-#	movm.l		&0xffff,SREGS(%a6)
-#	mov.l		&0x00000004,IREGS+0xc(%a6)
-
-#	bsr.l		chkregs
-#	tst.b		%d0
-#	bne.l		error
-
-ea_79:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM,%a3
-	mov.l		&0x2,%a4
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a6)
-
-	mulu.l		(ea_79_mem-0x10.l,%pc,%a4.l*8),%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0xffff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-
-	bra.b		ea_79_next
-ea_79_mem:
-	long		0x00000002
-ea_79_next:
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_80:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	bra.b		ea_80_next
-ea_80_mem:
-	long		0x00000002
-ea_80_next:
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM(%a6),%a1
-	mov.l		&-0x10,%d4
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a6)
-
-	mulu.l		(ea_80_mem+0x10.b,%pc,%d4.w*1),%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0xffff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_81:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	bra.b		ea_81_next
-ea_81_mem:
-	long		0x00000002
-ea_81_next:
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM(%a6),%a0
-	mov.l		&-0x8,%d4
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a6)
-
-	mulu.l		(ea_81_mem+0x10.b,%pc,%d4.w*2),%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0xffff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_82:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	bra.b		ea_82_next
-ea_82_mem:
-	long		0x00000002
-ea_82_next:
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM(%a6),%a0
-	mov.l		&-0x4,%d4
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a6)
-
-	mulu.l		(ea_82_mem+0x10.b,%pc,%d4.w*4),%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0xffff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_83:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	bra.b		ea_83_next
-ea_83_mem:
-	long		0x00000002
-ea_83_next:
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM(%a6),%a0
-	mov.l		&-0x2,%d4
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a6)
-
-	mulu.l		(ea_83_mem+0x10.b,%pc,%d4.w*8),%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0xffff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_84:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	bra.b		ea_84_next
-ea_84_mem:
-	long		0x00000002
-ea_84_next:
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM(%a6),%a0
-	mov.l		&-0x10,%d4
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a6)
-
-	mulu.l		(ea_84_mem+0x10.b,%pc,%d4.l*1),%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0xffff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_85:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	bra.b		ea_85_next
-ea_85_mem:
-	long		0x00000002
-ea_85_next:
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM(%a6),%a0
-	mov.l		&-0x8,%d4
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a6)
-
-	mulu.l		(ea_85_mem+0x10.b,%pc,%d4.l*2),%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0xffff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_86:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	bra.b		ea_86_next
-ea_86_mem:
-	long		0x00000002
-ea_86_next:
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM(%a6),%a0
-	mov.l		&-0x4,%d4
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a6)
-
-	mulu.l		(ea_86_mem+0x10.b,%pc,%d4.l*4),%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0xffff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_87:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	bra.b		ea_87_next
-ea_87_mem:
-	long		0x00000002
-ea_87_next:
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM(%a6),%a0
-	mov.l		&-0x2,%d4
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a6)
-
-	mulu.l		(ea_87_mem+0x10.b,%pc,%d4.l*8),%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0xffff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_88:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM(%a6),%a0
-	mov.l		&-0x2,%d4
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a6)
-
-	mulu.l		(ea_88_mem+0x10.b,%pc,%d4.l*8),%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0xffff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-
-	bra.b		ea_88_next
-ea_88_mem:
-	long		0x00000002
-ea_88_next:
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_89:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM-0x1000(%a6),%a3
-	lea		EASTORE(%a6),%a4
-	mov.l		%a3,(%a4)
-	mov.l		&-0x10,%d4
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a6)
-
-	mulu.l		([0x10.w,%a4,%d4.w*1],0x1000.w),%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0xffff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_90:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM-0x1000(%a6),%a3
-	lea		EASTORE(%a6),%a4
-	mov.l		%a3,(%a4)
-	mov.l		&-0x8,%d4
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a6)
-
-	mulu.l		([0x10.w,%a4,%d4.w*2],0x1000.w),%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0xffff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_91:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM-0x1000(%a6),%a3
-	lea		EASTORE(%a6),%a4
-	mov.l		%a3,(%a4)
-	mov.l		&-0x4,%d4
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a6)
-
-	mulu.l		([0x10.w,%a4,%d4.w*4],0x1000.w),%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0xffff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_92:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM-0x1000(%a6),%a3
-	lea		EASTORE(%a6),%a4
-	mov.l		%a3,(%a4)
-	mov.l		&-0x2,%d4
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a6)
-
-	mulu.l		([0x10.w,%a4,%d4.w*8],0x1000.w),%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0xffff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_93:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM-0x1000(%a6),%a3
-	lea		EASTORE(%a6),%a4
-	mov.l		%a3,(%a4)
-	mov.l		&-0x10,%d4
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a6)
-
-	mulu.l		([0x10.w,%a4,%d4.l*1],0x1000.w),%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0xffff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_94:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM-0x1000(%a6),%a3
-	lea		EASTORE(%a6),%a4
-	mov.l		%a3,(%a4)
-	mov.l		&-0x8,%d4
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a6)
-
-	mulu.l		([0x10.w,%a4,%d4.l*2],0x1000.w),%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0xffff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_95:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM-0x1000(%a6),%a3
-	lea		EASTORE(%a6),%a4
-	mov.l		%a3,(%a4)
-	mov.l		&-0x4,%d4
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a6)
-
-	mulu.l		([0x10.w,%a4,%d4.l*4],0x1000.w),%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0xffff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_96:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM-0x1000(%a6),%a3
-	lea		EASTORE(%a6),%a4
-	mov.l		%a3,(%a4)
-	mov.l		&-0x2,%d4
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a6)
-
-	mulu.l		([0x10.w,%a4,%d4.l*8],0x1000.w),%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0xffff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_97:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM-0x1000(%a6),%a3
-	lea		EASTORE(%a6),%a4
-	mov.l		%a3,(%a4)
-	mov.l		&-0x2,%d4
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a6)
-
-	mulu.l		([0x10.l,%a4,%d4.l*8],0x1000.l),%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0xffff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_98:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM-0x1000(%a6),%a3
-	lea		EASTORE(%a6),%a4
-	mov.l		%a3,(%a4)
-	mov.l		&-0x2,%d4
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a6)
-
-	mulu.l		([0x00.l,%a4,%zd4.l*8],0x1000.l),%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0xffff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_99:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM-0x1000(%a6),%a3
-	lea		EASTORE(%a6),%a4
-	mov.l		%a3,(%a4)
-	mov.l		&-0x2,%d4
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a6)
-
-	mulu.l		([%a4,%zd4.l*8],0x1000.l),%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0xffff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_100:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM-0x1000(%a6),%a3
-	lea		EASTORE(%a6),%a4
-	mov.l		%a3,(%a4)
-	mov.l		&-0x10,%d4
-	add.l		%a4,%d4
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a6)
-
-	mulu.l		([0x10.l,%za4,%d4.l*1],0x1000.l),%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0xffff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_101:
-	addq.l		&0x1,TESTCTR(%a6)
-
-#	movm.l		DEF_REGS(%pc),&0x3fff
-
-#	clr.l		%d2
-#	mov.l		&0x00000002,%d3
-#	lea		EAMEM(%a6),%a3
-#	lea		EASTORE(%a6),%a4
-#	mov.l		%a3,(%a4)
-#	mov.l		&-0x10,%d4
-
-#	mov.w		&0x0000,ICCR(%a6)
-#	mov.w		&0x0000,%cc
-#	movm.l		&0xffff,IREGS(%a6)
-
-#	mulu.l		([EASTORE.l,%za4,%zd4.l*1]),%d2:%d3
-
-#	mov.w		%cc,SCCR(%a6)
-#	movm.l		&0xffff,SREGS(%a6)
-#	mov.l		&0x00000004,IREGS+0xc(%a6)
-
-#	bsr.l		chkregs
-#	tst.b		%d0
-#	bne.l		error
-
-ea_102:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	mov.l		%a6,%a1
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM+0x1000(%a1),%a3
-	lea		EASTORE(%a1),%a4
-	mov.l		%a3,(%a4)
-	mov.l		&-0x2,%a6
-
-	mov.w		&0x0000,ICCR(%a1)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a1)
-
-	mulu.l		([0x10.w,%a4,%a6.l*8],-0x1000.w),%d2:%d3
-
-	mov.w		%cc,SCCR(%a1)
-	movm.l		&0xffff,SREGS(%a1)
-	mov.l		&0x00000004,IREGS+0xc(%a1)
-
-	mov.l		%a1,%a6
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_103:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	mov.l		%a6,%a1
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM+0x1000(%a1),%a3
-	lea		EASTORE(%a1),%a4
-	mov.l		%a3,(%a4)
-	mov.l		&0x2,%a6
-
-	mov.w		&0x0000,ICCR(%a1)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a1)
-
-	mulu.l		([-0x10.w,%a4,%a6.l*8],-0x1000.w),%d2:%d3
-
-	mov.w		%cc,SCCR(%a1)
-	movm.l		&0xffff,SREGS(%a1)
-	mov.l		&0x00000004,IREGS+0xc(%a1)
-
-	mov.l		%a1,%a6
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_104:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM-0x20(%a6),%a3
-	lea		EASTORE(%a6),%a4
-	mov.l		%a3,(%a4)
-	sub.l		&0x10,%a4
-	mov.l		&0x10,%d4
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a6)
-
-	mulu.l		([0x10.w,%a4],%d4.w*1,0x10.w),%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0xffff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_105:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM-0x20(%a6),%a3
-	lea		EASTORE(%a6),%a4
-	mov.l		%a3,(%a4)
-	sub.l		&0x10,%a4
-	mov.l		&0x8,%d4
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a6)
-
-	mulu.l		([0x10.w,%a4],%d4.w*2,0x10.w),%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0xffff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_106:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM-0x20(%a6),%a3
-	lea		EASTORE(%a6),%a4
-	mov.l		%a3,(%a4)
-	sub.l		&0x10,%a4
-	mov.l		&0x4,%d4
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a6)
-
-	mulu.l		([0x10.w,%a4],%d4.w*4,0x10.w),%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0xffff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_107:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM-0x20(%a6),%a3
-	lea		EASTORE(%a6),%a4
-	mov.l		%a3,(%a4)
-	sub.l		&0x10,%a4
-	mov.l		&0x2,%d4
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a6)
-
-	mulu.l		([0x10.w,%a4],%d4.w*8,0x10.w),%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0xffff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_108:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM-0x20(%a6),%a3
-	lea		EASTORE(%a6),%a4
-	mov.l		%a3,(%a4)
-	sub.l		&0x10,%a4
-	mov.l		&0x10,%d4
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a6)
-
-	mulu.l		([0x10.w,%a4],%d4.l*1,0x10.w),%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0xffff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_109:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM-0x20(%a6),%a3
-	lea		EASTORE(%a6),%a4
-	mov.l		%a3,(%a4)
-	sub.l		&0x10,%a4
-	mov.l		&0x8,%d4
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a6)
-
-	mulu.l		([0x10.w,%a4],%d4.w*2,0x10.w),%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0xffff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_110:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM-0x20(%a6),%a3
-	lea		EASTORE(%a6),%a4
-	mov.l		%a3,(%a4)
-	sub.l		&0x10,%a4
-	mov.l		&0x4,%d4
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a6)
-
-	mulu.l		([0x10.w,%a4],%d4.l*4,0x10.w),%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0xffff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_111:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM-0x20(%a6),%a3
-	lea		EASTORE(%a6),%a4
-	mov.l		%a3,(%a4)
-	sub.l		&0x10,%a4
-	mov.l		&0x2,%d4
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a6)
-
-	mulu.l		([0x10.w,%a4],%d4.l*8,0x10.w),%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0xffff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_112:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM-0x20(%a6),%a3
-	lea		EASTORE(%a6),%a4
-	mov.l		%a3,(%a4)
-	sub.l		&0x10,%a4
-	mov.l		&0x2,%d4
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a6)
-
-	mulu.l		([0x10.l,%a4],%d4.l*8,0x10.l),%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0xffff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_113:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM-0x20(%a6),%a3
-	lea		EASTORE(%a6),%a4
-	mov.l		%a3,(%a4)
-	mov.l		&0x2,%d4
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a6)
-
-	mulu.l		([0x00.l,%a4],%zd4.l*8,0x20.l),%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0xffff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_114:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	mov.l		%a7,%a0
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM-0x20(%a6),%a3
-	lea		EASTORE(%a6),%a7
-	mov.l		%a3,(%a7)
-	mov.l		&0x20,%d4
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a6)
-
-	mulu.l		([%a7],%d4.l*1),%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0xffff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-
-	mov.l		%a0,%a7
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_115:
-	addq.l		&0x1,TESTCTR(%a6)
-
-#	movm.l		DEF_REGS(%pc),&0x3fff
-
-#	clr.l		%d2
-#	mov.l		&0x00000002,%d3
-#	lea		EAMEM-0x20(%pc),%a3
-#	lea		EASTORE(%pc),%a4
-#	mov.l		%a3,(%a4)
-#	mov.l		&0x2,%d4
-
-#	mov.w		&0x0000,ICCR(%a6)
-#	mov.w		&0x0000,%cc
-#	movm.l		&0xffff,IREGS(%a6)
-
-#	mulu.l		([EASTORE.l,%za4],%zd4.l*8,0x20.l),%d2:%d3
-
-#	mov.w		%cc,SCCR(%a6)
-#	movm.l		&0xffff,SREGS(%a6)
-#	mov.l		&0x00000004,IREGS+0xc(%a6)
-
-#	bsr.l		chkregs
-#	tst.b		%d0
-#	bne.l		error
-
-ea_116:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	mov.l		%a6,%a1
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM(%a1),%a3
-	lea		EASTORE(%a1),%a6
-	mov.l		%a3,(%a6)
-	add.l		&0x10,%a6
-	mov.l		&-0x2,%a5
-
-	mov.w		&0x0000,ICCR(%a1)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a1)
-
-	mulu.l		([-0x10.w,%a6],%a5.l*8,0x10.l),%d2:%d3
-
-	mov.w		%cc,SCCR(%a1)
-	movm.l		&0xffff,SREGS(%a1)
-	mov.l		&0x00000004,IREGS+0xc(%a1)
-
-	mov.l		%a1,%a6
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-	mov.l		TESTCTR(%a6),%d1
-	clr.l		%d0
-	rts
-
-ea_117:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM-0x1000(%pc),%a3
-	lea		EASTORE(%pc),%a4
-	mov.l		%a3,(%a4)
-	mov.l		&-0x10,%d4
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a6)
-
-	mulu.l		([EASTORE+0x10.w,%pc,%d4.w*1],0x1000.w),%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0xffff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_118:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM-0x1000(%pc),%a3
-	lea		EASTORE(%pc),%a4
-	mov.l		%a3,(%a4)
-	mov.l		&-0x8,%d4
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a6)
-
-	mulu.l		([EASTORE+0x10.w,%pc,%d4.w*2],0x1000.w),%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0xffff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_119:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM-0x1000(%pc),%a3
-	lea		EASTORE(%pc),%a4
-	mov.l		%a3,(%a4)
-	mov.l		&-0x4,%d4
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a6)
-
-	mulu.l		([EASTORE+0x10.w,%pc,%d4.w*4],0x1000.w),%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0xffff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_120:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM-0x1000(%pc),%a3
-	lea		EASTORE(%pc),%a4
-	mov.l		%a3,(%a4)
-	mov.l		&-0x2,%d4
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a6)
-
-	mulu.l		([EASTORE+0x10.w,%pc,%d4.w*8],0x1000.w),%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0xffff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_121:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM-0x1000(%pc),%a3
-	lea		EASTORE(%pc),%a4
-	mov.l		%a3,(%a4)
-	mov.l		&-0x10,%d4
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a6)
-
-	mulu.l		([EASTORE+0x10.w,%pc,%d4.l*1],0x1000.w),%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0xffff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_122:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM-0x1000(%pc),%a3
-	lea		EASTORE(%pc),%a4
-	mov.l		%a3,(%a4)
-	mov.l		&-0x8,%d4
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a6)
-
-	mulu.l		([EASTORE+0x10.w,%pc,%d4.l*2],0x1000.w),%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0xffff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_123:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM-0x1000(%pc),%a3
-	lea		EASTORE(%pc),%a4
-	mov.l		%a3,(%a4)
-	mov.l		&-0x4,%d4
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a6)
-
-	mulu.l		([EASTORE+0x10.w,%pc,%d4.l*4],0x1000.w),%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0xffff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_124:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM-0x1000(%pc),%a3
-	lea		EASTORE(%pc),%a4
-	mov.l		%a3,(%a4)
-	mov.l		&-0x2,%d4
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a6)
-
-	mulu.l		([EASTORE+0x10.w,%pc,%d4.l*8],0x1000.w),%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0xffff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_125:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM-0x1000(%pc),%a3
-	lea		EASTORE(%pc),%a4
-	mov.l		%a3,(%a4)
-	mov.l		&-0x2,%d4
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a6)
-	mulu.l		([EASTORE+0x10.l,%pc,%d4.l*8],0x1000.l),%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0xffff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_126:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM-0x1000(%pc),%a3
-	lea		EASTORE(%pc),%a4
-	mov.l		%a3,(%a4)
-	mov.l		&-0x2,%d4
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a6)
-
-	mulu.l		([EASTORE+0x00.l,%pc,%zd4.l*8],0x1000.l),%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0xffff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_127:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM-0x1000(%pc),%a3
-	lea		EASTORE(%pc),%a4
-	mov.l		%a3,(%a4)
-	mov.l		%a4,%d4
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a6)
-
-	mulu.l		([%zpc,%d4.l*1],0x1000.l),%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0xffff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_128:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM-0x1000(%pc),%a3
-	lea		EASTORE(%pc),%a4
-	mov.l		%a3,(%a4)
-	mov.l		&-0x10,%d4
-	add.l		%a4,%d4
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a6)
-
-	mulu.l		([0x10.l,%zpc,%d4.l*1],0x1000.l),%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0xffff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_129:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM(%pc),%a3
-	lea		EASTORE(%pc),%a4
-	mov.l		%a3,(%a4)
-	mov.l		&-0x10,%d4
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a6)
-
-	mulu.l		([EASTORE.l,%zpc,%zd4.l*1]),%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0xffff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_130:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM+0x1000(%pc),%a3
-	lea		EASTORE(%pc),%a4
-	mov.l		%a3,(%a4)
-	mov.l		&0x2,%a6
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a6)
-
-	mulu.l		([EASTORE-0x10.w,%pc,%a6.l*8],-0x1000.w),%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0xffff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_131:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	mov.l		%a7,%a0
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM+0x1000(%pc),%a3
-	lea		EASTORE(%pc),%a4
-	mov.l		%a3,(%a4)
-	mov.l		&0x2,%a7
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a6)
-
-	mulu.l		([EASTORE-0x10.w,%pc,%a7.l*8],-0x1000.w),%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0xffff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-
-	mov.l		%a0,%a7
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_132:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM-0x20(%pc),%a3
-	lea		EASTORE(%pc),%a4
-	mov.l		%a3,(%a4)
-	sub.l		&0x10,%a4
-	mov.l		&0x10,%d4
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a6)
-
-	mulu.l		([EASTORE.w,%pc],%d4.w*1,0x10.w),%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0xffff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_133:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM-0x20(%pc),%a3
-	lea		EASTORE(%pc),%a4
-	mov.l		%a3,(%a4)
-	sub.l		&0x10,%a4
-	mov.l		&0x8,%d4
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a6)
-
-	mulu.l		([EASTORE.w,%pc],%d4.w*2,0x10.w),%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0xffff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_134:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM-0x20(%pc),%a3
-	lea		EASTORE(%pc),%a4
-	mov.l		%a3,(%a4)
-	sub.l		&0x10,%a4
-	mov.l		&0x4,%d4
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a6)
-
-	mulu.l		([EASTORE.w,%pc],%d4.w*4,0x10.w),%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0xffff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_135:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM-0x20(%pc),%a3
-	lea		EASTORE(%pc),%a4
-	mov.l		%a3,(%a4)
-	sub.l		&0x10,%a4
-	mov.l		&0x2,%d4
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a6)
-
-	mulu.l		([EASTORE.w,%pc],%d4.w*8,0x10.w),%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0xffff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_136:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM-0x20(%pc),%a3
-	lea		EASTORE(%pc),%a4
-	mov.l		%a3,(%a4)
-	sub.l		&0x10,%a4
-	mov.l		&0x10,%d4
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a6)
-
-	mulu.l		([EASTORE.w,%pc],%d4.l*1,0x10.w),%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0xffff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_137:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM-0x20(%pc),%a3
-	lea		EASTORE(%pc),%a4
-	mov.l		%a3,(%a4)
-	sub.l		&0x10,%a4
-	mov.l		&0x8,%d4
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a6)
-
-	mulu.l		([EASTORE.w,%pc],%d4.w*2,0x10.w),%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0xffff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_138:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM-0x20(%pc),%a3
-	lea		EASTORE(%pc),%a4
-	mov.l		%a3,(%a4)
-	sub.l		&0x10,%a4
-	mov.l		&0x4,%d4
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a6)
-
-	mulu.l		([EASTORE.w,%pc],%d4.l*4,0x10.w),%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0xffff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_139:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM-0x20(%pc),%a3
-	lea		EASTORE(%pc),%a4
-	mov.l		%a3,(%a4)
-	sub.l		&0x10,%a4
-	mov.l		&0x2,%d4
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a6)
-
-	mulu.l		([EASTORE.w,%pc],%d4.l*8,0x10.w),%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0xffff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_140:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM-0x20(%pc),%a3
-	lea		EASTORE(%pc),%a4
-	mov.l		%a3,(%a4)
-	sub.l		&0x10,%a4
-	mov.l		&0x2,%d4
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a6)
-
-	mulu.l		([EASTORE.l,%pc],%d4.l*8,0x10.l),%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0xffff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_141:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM-0x20(%pc),%a3
-	lea		EASTORE(%pc),%a4
-	mov.l		%a3,(%a4)
-	mov.l		&0x2,%d4
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a6)
-
-	mulu.l		([EASTORE.l,%pc],%zd4.l*8,0x20.l),%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0xffff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_142:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM-0x20(%pc),%a3
-	lea		EASTORE(%pc),%a4
-	mov.l		%a3,(%a4)
-	mov.l		&0x4,%d4
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a6)
-
-	mulu.l		([EASTORE.l,%zpc],%d4.l*8),%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0xffff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-ea_143:
-	addq.l		&0x1,TESTCTR(%a6)
-
-	movm.l		DEF_REGS(%pc),&0x3fff
-
-	mov.l		%a7,%a0
-	clr.l		%d2
-	mov.l		&0x00000002,%d3
-	lea		EAMEM(%pc),%a3
-	lea		EASTORE(%pc),%a6
-	mov.l		%a3,(%a6)
-	add.l		&0x10,%a6
-	mov.l		&-0x2,%a7
-
-	mov.w		&0x0000,ICCR(%a6)
-	mov.w		&0x0000,%cc
-	movm.l		&0xffff,IREGS(%a6)
-
-	mulu.l		([EASTORE.w,%pc],%a7.l*8,0x10.l),%d2:%d3
-
-	mov.w		%cc,SCCR(%a6)
-	movm.l		&0xffff,SREGS(%a6)
-	mov.l		&0x00000004,IREGS+0xc(%a6)
-
-	mov.l		%a0,%a7
-	bsr.l		chkregs
-	tst.b		%d0
-	bne.l		error
-
-	clr.l		%d0
-	rts
-
-###########################################################
-###########################################################
-chkregs:
-	lea		IREGS(%a6),%a0
-	lea		SREGS(%a6),%a1
-	mov.l		&14,%d0
-chkregs_loop:
-	cmp.l		(%a0)+,(%a1)+
-	bne.l		chkregs_error
-	dbra.w		%d0,chkregs_loop
-
-	mov.w		ICCR(%a6),%d0
-	mov.w		SCCR(%a6),%d1
-	cmp.w		%d0,%d1
-	bne.l		chkregs_error
-
-	clr.l		%d0
-	rts
-
-chkregs_error:
-	movq.l		&0x1,%d0
-	rts
-
-error:
-	mov.l		TESTCTR(%a6),%d1
-	movq.l		&0x1,%d0
-	rts
-
-DEF_REGS:
-	long		0xacacacac, 0xacacacac, 0xacacacac, 0xacacacac
-	long		0xacacacac, 0xacacacac, 0xacacacac, 0xacacacac
-
-	long		0xacacacac, 0xacacacac, 0xacacacac, 0xacacacac
-	long		0xacacacac, 0xacacacac, 0xacacacac, 0xacacacac
-
-############################################################
-
-_print_str:
-	mov.l		%d0,-(%sp)
-	mov.l		(TESTTOP-0x80+0x0,%pc),%d0
-	pea		(TESTTOP-0x80,%pc,%d0)
-	mov.l		0x4(%sp),%d0
-	rtd		&0x4
-
-_print_num:
-	mov.l		%d0,-(%sp)
-	mov.l		(TESTTOP-0x80+0x4,%pc),%d0
-	pea		(TESTTOP-0x80,%pc,%d0)
-	mov.l		0x4(%sp),%d0
-	rtd		&0x4
-
-############################################################
diff --git a/ANDROID_3.4.5/arch/m68k/ifpsp060/src/pfpsp.S b/ANDROID_3.4.5/arch/m68k/ifpsp060/src/pfpsp.S
deleted file mode 100644
index 4aedef97..00000000
--- a/ANDROID_3.4.5/arch/m68k/ifpsp060/src/pfpsp.S
+++ /dev/null
@@ -1,14745 +0,0 @@
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-MOTOROLA MICROPROCESSOR & MEMORY TECHNOLOGY GROUP
-M68000 Hi-Performance Microprocessor Division
-M68060 Software Package
-Production Release P1.00 -- October 10, 1994
-
-M68060 Software Package Copyright © 1993, 1994 Motorola Inc.  All rights reserved.
-
-THE SOFTWARE is provided on an "AS IS" basis and without warranty.
-To the maximum extent permitted by applicable law,
-MOTOROLA DISCLAIMS ALL WARRANTIES WHETHER EXPRESS OR IMPLIED,
-INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
-and any warranty against infringement with regard to the SOFTWARE
-(INCLUDING ANY MODIFIED VERSIONS THEREOF) and any accompanying written materials.
-
-To the maximum extent permitted by applicable law,
-IN NO EVENT SHALL MOTOROLA BE LIABLE FOR ANY DAMAGES WHATSOEVER
-(INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS,
-BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, OR OTHER PECUNIARY LOSS)
-ARISING OF THE USE OR INABILITY TO USE THE SOFTWARE.
-Motorola assumes no responsibility for the maintenance and support of the SOFTWARE.
-
-You are hereby granted a copyright license to use, modify, and distribute the SOFTWARE
-so long as this entire notice is retained without alteration in any modified and/or
-redistributed versions, and that such modified versions are clearly identified as such.
-No licenses are granted by implication, estoppel or otherwise under any patents
-or trademarks of Motorola, Inc.
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-# freal.s:
-#	This file is appended to the top of the 060FPSP package
-# and contains the entry points into the package. The user, in
-# effect, branches to one of the branch table entries located
-# after _060FPSP_TABLE.
-#	Also, subroutine stubs exist in this file (_fpsp_done for
-# example) that are referenced by the FPSP package itself in order
-# to call a given routine. The stub routine actually performs the
-# callout. The FPSP code does a "bsr" to the stub routine. This
-# extra layer of hierarchy adds a slight performance penalty but
-# it makes the FPSP code easier to read and more mainatinable.
-#
-
-set	_off_bsun,	0x00
-set	_off_snan,	0x04
-set	_off_operr,	0x08
-set	_off_ovfl,	0x0c
-set	_off_unfl,	0x10
-set	_off_dz,	0x14
-set	_off_inex,	0x18
-set	_off_fline,	0x1c
-set	_off_fpu_dis,	0x20
-set	_off_trap,	0x24
-set	_off_trace,	0x28
-set	_off_access,	0x2c
-set	_off_done,	0x30
-
-set	_off_imr,	0x40
-set	_off_dmr,	0x44
-set	_off_dmw,	0x48
-set	_off_irw,	0x4c
-set	_off_irl,	0x50
-set	_off_drb,	0x54
-set	_off_drw,	0x58
-set	_off_drl,	0x5c
-set	_off_dwb,	0x60
-set	_off_dww,	0x64
-set	_off_dwl,	0x68
-
-_060FPSP_TABLE:
-
-###############################################################
-
-# Here's the table of ENTRY POINTS for those linking the package.
-	bra.l		_fpsp_snan
-	short		0x0000
-	bra.l		_fpsp_operr
-	short		0x0000
-	bra.l		_fpsp_ovfl
-	short		0x0000
-	bra.l		_fpsp_unfl
-	short		0x0000
-	bra.l		_fpsp_dz
-	short		0x0000
-	bra.l		_fpsp_inex
-	short		0x0000
-	bra.l		_fpsp_fline
-	short		0x0000
-	bra.l		_fpsp_unsupp
-	short		0x0000
-	bra.l		_fpsp_effadd
-	short		0x0000
-
-	space		56
-
-###############################################################
-	global		_fpsp_done
-_fpsp_done:
-	mov.l		%d0,-(%sp)
-	mov.l		(_060FPSP_TABLE-0x80+_off_done,%pc),%d0
-	pea.l		(_060FPSP_TABLE-0x80,%pc,%d0)
-	mov.l		0x4(%sp),%d0
-	rtd		&0x4
-
-	global		_real_ovfl
-_real_ovfl:
-	mov.l		%d0,-(%sp)
-	mov.l		(_060FPSP_TABLE-0x80+_off_ovfl,%pc),%d0
-	pea.l		(_060FPSP_TABLE-0x80,%pc,%d0)
-	mov.l		0x4(%sp),%d0
-	rtd		&0x4
-
-	global		_real_unfl
-_real_unfl:
-	mov.l		%d0,-(%sp)
-	mov.l		(_060FPSP_TABLE-0x80+_off_unfl,%pc),%d0
-	pea.l		(_060FPSP_TABLE-0x80,%pc,%d0)
-	mov.l		0x4(%sp),%d0
-	rtd		&0x4
-
-	global		_real_inex
-_real_inex:
-	mov.l		%d0,-(%sp)
-	mov.l		(_060FPSP_TABLE-0x80+_off_inex,%pc),%d0
-	pea.l		(_060FPSP_TABLE-0x80,%pc,%d0)
-	mov.l		0x4(%sp),%d0
-	rtd		&0x4
-
-	global		_real_bsun
-_real_bsun:
-	mov.l		%d0,-(%sp)
-	mov.l		(_060FPSP_TABLE-0x80+_off_bsun,%pc),%d0
-	pea.l		(_060FPSP_TABLE-0x80,%pc,%d0)
-	mov.l		0x4(%sp),%d0
-	rtd		&0x4
-
-	global		_real_operr
-_real_operr:
-	mov.l		%d0,-(%sp)
-	mov.l		(_060FPSP_TABLE-0x80+_off_operr,%pc),%d0
-	pea.l		(_060FPSP_TABLE-0x80,%pc,%d0)
-	mov.l		0x4(%sp),%d0
-	rtd		&0x4
-
-	global		_real_snan
-_real_snan:
-	mov.l		%d0,-(%sp)
-	mov.l		(_060FPSP_TABLE-0x80+_off_snan,%pc),%d0
-	pea.l		(_060FPSP_TABLE-0x80,%pc,%d0)
-	mov.l		0x4(%sp),%d0
-	rtd		&0x4
-
-	global		_real_dz
-_real_dz:
-	mov.l		%d0,-(%sp)
-	mov.l		(_060FPSP_TABLE-0x80+_off_dz,%pc),%d0
-	pea.l		(_060FPSP_TABLE-0x80,%pc,%d0)
-	mov.l		0x4(%sp),%d0
-	rtd		&0x4
-
-	global		_real_fline
-_real_fline:
-	mov.l		%d0,-(%sp)
-	mov.l		(_060FPSP_TABLE-0x80+_off_fline,%pc),%d0
-	pea.l		(_060FPSP_TABLE-0x80,%pc,%d0)
-	mov.l		0x4(%sp),%d0
-	rtd		&0x4
-
-	global		_real_fpu_disabled
-_real_fpu_disabled:
-	mov.l		%d0,-(%sp)
-	mov.l		(_060FPSP_TABLE-0x80+_off_fpu_dis,%pc),%d0
-	pea.l		(_060FPSP_TABLE-0x80,%pc,%d0)
-	mov.l		0x4(%sp),%d0
-	rtd		&0x4
-
-	global		_real_trap
-_real_trap:
-	mov.l		%d0,-(%sp)
-	mov.l		(_060FPSP_TABLE-0x80+_off_trap,%pc),%d0
-	pea.l		(_060FPSP_TABLE-0x80,%pc,%d0)
-	mov.l		0x4(%sp),%d0
-	rtd		&0x4
-
-	global		_real_trace
-_real_trace:
-	mov.l		%d0,-(%sp)
-	mov.l		(_060FPSP_TABLE-0x80+_off_trace,%pc),%d0
-	pea.l		(_060FPSP_TABLE-0x80,%pc,%d0)
-	mov.l		0x4(%sp),%d0
-	rtd		&0x4
-
-	global		_real_access
-_real_access:
-	mov.l		%d0,-(%sp)
-	mov.l		(_060FPSP_TABLE-0x80+_off_access,%pc),%d0
-	pea.l		(_060FPSP_TABLE-0x80,%pc,%d0)
-	mov.l		0x4(%sp),%d0
-	rtd		&0x4
-
-#######################################
-
-	global		_imem_read
-_imem_read:
-	mov.l		%d0,-(%sp)
-	mov.l		(_060FPSP_TABLE-0x80+_off_imr,%pc),%d0
-	pea.l		(_060FPSP_TABLE-0x80,%pc,%d0)
-	mov.l		0x4(%sp),%d0
-	rtd		&0x4
-
-	global		_dmem_read
-_dmem_read:
-	mov.l		%d0,-(%sp)
-	mov.l		(_060FPSP_TABLE-0x80+_off_dmr,%pc),%d0
-	pea.l		(_060FPSP_TABLE-0x80,%pc,%d0)
-	mov.l		0x4(%sp),%d0
-	rtd		&0x4
-
-	global		_dmem_write
-_dmem_write:
-	mov.l		%d0,-(%sp)
-	mov.l		(_060FPSP_TABLE-0x80+_off_dmw,%pc),%d0
-	pea.l		(_060FPSP_TABLE-0x80,%pc,%d0)
-	mov.l		0x4(%sp),%d0
-	rtd		&0x4
-
-	global		_imem_read_word
-_imem_read_word:
-	mov.l		%d0,-(%sp)
-	mov.l		(_060FPSP_TABLE-0x80+_off_irw,%pc),%d0
-	pea.l		(_060FPSP_TABLE-0x80,%pc,%d0)
-	mov.l		0x4(%sp),%d0
-	rtd		&0x4
-
-	global		_imem_read_long
-_imem_read_long:
-	mov.l		%d0,-(%sp)
-	mov.l		(_060FPSP_TABLE-0x80+_off_irl,%pc),%d0
-	pea.l		(_060FPSP_TABLE-0x80,%pc,%d0)
-	mov.l		0x4(%sp),%d0
-	rtd		&0x4
-
-	global		_dmem_read_byte
-_dmem_read_byte:
-	mov.l		%d0,-(%sp)
-	mov.l		(_060FPSP_TABLE-0x80+_off_drb,%pc),%d0
-	pea.l		(_060FPSP_TABLE-0x80,%pc,%d0)
-	mov.l		0x4(%sp),%d0
-	rtd		&0x4
-
-	global		_dmem_read_word
-_dmem_read_word:
-	mov.l		%d0,-(%sp)
-	mov.l		(_060FPSP_TABLE-0x80+_off_drw,%pc),%d0
-	pea.l		(_060FPSP_TABLE-0x80,%pc,%d0)
-	mov.l		0x4(%sp),%d0
-	rtd		&0x4
-
-	global		_dmem_read_long
-_dmem_read_long:
-	mov.l		%d0,-(%sp)
-	mov.l		(_060FPSP_TABLE-0x80+_off_drl,%pc),%d0
-	pea.l		(_060FPSP_TABLE-0x80,%pc,%d0)
-	mov.l		0x4(%sp),%d0
-	rtd		&0x4
-
-	global		_dmem_write_byte
-_dmem_write_byte:
-	mov.l		%d0,-(%sp)
-	mov.l		(_060FPSP_TABLE-0x80+_off_dwb,%pc),%d0
-	pea.l		(_060FPSP_TABLE-0x80,%pc,%d0)
-	mov.l		0x4(%sp),%d0
-	rtd		&0x4
-
-	global		_dmem_write_word
-_dmem_write_word:
-	mov.l		%d0,-(%sp)
-	mov.l		(_060FPSP_TABLE-0x80+_off_dww,%pc),%d0
-	pea.l		(_060FPSP_TABLE-0x80,%pc,%d0)
-	mov.l		0x4(%sp),%d0
-	rtd		&0x4
-
-	global		_dmem_write_long
-_dmem_write_long:
-	mov.l		%d0,-(%sp)
-	mov.l		(_060FPSP_TABLE-0x80+_off_dwl,%pc),%d0
-	pea.l		(_060FPSP_TABLE-0x80,%pc,%d0)
-	mov.l		0x4(%sp),%d0
-	rtd		&0x4
-
-#
-# This file contains a set of define statements for constants
-# in order to promote readability within the corecode itself.
-#
-
-set LOCAL_SIZE,		192			# stack frame size(bytes)
-set LV,			-LOCAL_SIZE		# stack offset
-
-set EXC_SR,		0x4			# stack status register
-set EXC_PC,		0x6			# stack pc
-set EXC_VOFF,		0xa			# stacked vector offset
-set EXC_EA,		0xc			# stacked <ea>
-
-set EXC_FP,		0x0			# frame pointer
-
-set EXC_AREGS,		-68			# offset of all address regs
-set EXC_DREGS,		-100			# offset of all data regs
-set EXC_FPREGS,		-36			# offset of all fp regs
-
-set EXC_A7,		EXC_AREGS+(7*4)		# offset of saved a7
-set OLD_A7,		EXC_AREGS+(6*4)		# extra copy of saved a7
-set EXC_A6,		EXC_AREGS+(6*4)		# offset of saved a6
-set EXC_A5,		EXC_AREGS+(5*4)
-set EXC_A4,		EXC_AREGS+(4*4)
-set EXC_A3,		EXC_AREGS+(3*4)
-set EXC_A2,		EXC_AREGS+(2*4)
-set EXC_A1,		EXC_AREGS+(1*4)
-set EXC_A0,		EXC_AREGS+(0*4)
-set EXC_D7,		EXC_DREGS+(7*4)
-set EXC_D6,		EXC_DREGS+(6*4)
-set EXC_D5,		EXC_DREGS+(5*4)
-set EXC_D4,		EXC_DREGS+(4*4)
-set EXC_D3,		EXC_DREGS+(3*4)
-set EXC_D2,		EXC_DREGS+(2*4)
-set EXC_D1,		EXC_DREGS+(1*4)
-set EXC_D0,		EXC_DREGS+(0*4)
-
-set EXC_FP0,		EXC_FPREGS+(0*12)	# offset of saved fp0
-set EXC_FP1,		EXC_FPREGS+(1*12)	# offset of saved fp1
-set EXC_FP2,		EXC_FPREGS+(2*12)	# offset of saved fp2 (not used)
-
-set FP_SCR1,		LV+80			# fp scratch 1
-set FP_SCR1_EX,		FP_SCR1+0
-set FP_SCR1_SGN,	FP_SCR1+2
-set FP_SCR1_HI,		FP_SCR1+4
-set FP_SCR1_LO,		FP_SCR1+8
-
-set FP_SCR0,		LV+68			# fp scratch 0
-set FP_SCR0_EX,		FP_SCR0+0
-set FP_SCR0_SGN,	FP_SCR0+2
-set FP_SCR0_HI,		FP_SCR0+4
-set FP_SCR0_LO,		FP_SCR0+8
-
-set FP_DST,		LV+56			# fp destination operand
-set FP_DST_EX,		FP_DST+0
-set FP_DST_SGN,		FP_DST+2
-set FP_DST_HI,		FP_DST+4
-set FP_DST_LO,		FP_DST+8
-
-set FP_SRC,		LV+44			# fp source operand
-set FP_SRC_EX,		FP_SRC+0
-set FP_SRC_SGN,		FP_SRC+2
-set FP_SRC_HI,		FP_SRC+4
-set FP_SRC_LO,		FP_SRC+8
-
-set USER_FPIAR,		LV+40			# FP instr address register
-
-set USER_FPSR,		LV+36			# FP status register
-set FPSR_CC,		USER_FPSR+0		# FPSR condition codes
-set FPSR_QBYTE,		USER_FPSR+1		# FPSR qoutient byte
-set FPSR_EXCEPT,	USER_FPSR+2		# FPSR exception status byte
-set FPSR_AEXCEPT,	USER_FPSR+3		# FPSR accrued exception byte
-
-set USER_FPCR,		LV+32			# FP control register
-set FPCR_ENABLE,	USER_FPCR+2		# FPCR exception enable
-set FPCR_MODE,		USER_FPCR+3		# FPCR rounding mode control
-
-set L_SCR3,		LV+28			# integer scratch 3
-set L_SCR2,		LV+24			# integer scratch 2
-set L_SCR1,		LV+20			# integer scratch 1
-
-set STORE_FLG,		LV+19			# flag: operand store (ie. not fcmp/ftst)
-
-set EXC_TEMP2,		LV+24			# temporary space
-set EXC_TEMP,		LV+16			# temporary space
-
-set DTAG,		LV+15			# destination operand type
-set STAG,		LV+14			# source operand type
-
-set SPCOND_FLG,		LV+10			# flag: special case (see below)
-
-set EXC_CC,		LV+8			# saved condition codes
-set EXC_EXTWPTR,	LV+4			# saved current PC (active)
-set EXC_EXTWORD,	LV+2			# saved extension word
-set EXC_CMDREG,		LV+2			# saved extension word
-set EXC_OPWORD,		LV+0			# saved operation word
-
-################################
-
-# Helpful macros
-
-set FTEMP,		0			# offsets within an
-set FTEMP_EX,		0			# extended precision
-set FTEMP_SGN,		2			# value saved in memory.
-set FTEMP_HI,		4
-set FTEMP_LO,		8
-set FTEMP_GRS,		12
-
-set LOCAL,		0			# offsets within an
-set LOCAL_EX,		0			# extended precision
-set LOCAL_SGN,		2			# value saved in memory.
-set LOCAL_HI,		4
-set LOCAL_LO,		8
-set LOCAL_GRS,		12
-
-set DST,		0			# offsets within an
-set DST_EX,		0			# extended precision
-set DST_HI,		4			# value saved in memory.
-set DST_LO,		8
-
-set SRC,		0			# offsets within an
-set SRC_EX,		0			# extended precision
-set SRC_HI,		4			# value saved in memory.
-set SRC_LO,		8
-
-set SGL_LO,		0x3f81			# min sgl prec exponent
-set SGL_HI,		0x407e			# max sgl prec exponent
-set DBL_LO,		0x3c01			# min dbl prec exponent
-set DBL_HI,		0x43fe			# max dbl prec exponent
-set EXT_LO,		0x0			# min ext prec exponent
-set EXT_HI,		0x7ffe			# max ext prec exponent
-
-set EXT_BIAS,		0x3fff			# extended precision bias
-set SGL_BIAS,		0x007f			# single precision bias
-set DBL_BIAS,		0x03ff			# double precision bias
-
-set NORM,		0x00			# operand type for STAG/DTAG
-set ZERO,		0x01			# operand type for STAG/DTAG
-set INF,		0x02			# operand type for STAG/DTAG
-set QNAN,		0x03			# operand type for STAG/DTAG
-set DENORM,		0x04			# operand type for STAG/DTAG
-set SNAN,		0x05			# operand type for STAG/DTAG
-set UNNORM,		0x06			# operand type for STAG/DTAG
-
-##################
-# FPSR/FPCR bits #
-##################
-set neg_bit,		0x3			# negative result
-set z_bit,		0x2			# zero result
-set inf_bit,		0x1			# infinite result
-set nan_bit,		0x0			# NAN result
-
-set q_sn_bit,		0x7			# sign bit of quotient byte
-
-set bsun_bit,		7			# branch on unordered
-set snan_bit,		6			# signalling NAN
-set operr_bit,		5			# operand error
-set ovfl_bit,		4			# overflow
-set unfl_bit,		3			# underflow
-set dz_bit,		2			# divide by zero
-set inex2_bit,		1			# inexact result 2
-set inex1_bit,		0			# inexact result 1
-
-set aiop_bit,		7			# accrued inexact operation bit
-set aovfl_bit,		6			# accrued overflow bit
-set aunfl_bit,		5			# accrued underflow bit
-set adz_bit,		4			# accrued dz bit
-set ainex_bit,		3			# accrued inexact bit
-
-#############################
-# FPSR individual bit masks #
-#############################
-set neg_mask,		0x08000000		# negative bit mask (lw)
-set inf_mask,		0x02000000		# infinity bit mask (lw)
-set z_mask,		0x04000000		# zero bit mask (lw)
-set nan_mask,		0x01000000		# nan bit mask (lw)
-
-set neg_bmask,		0x08			# negative bit mask (byte)
-set inf_bmask,		0x02			# infinity bit mask (byte)
-set z_bmask,		0x04			# zero bit mask (byte)
-set nan_bmask,		0x01			# nan bit mask (byte)
-
-set bsun_mask,		0x00008000		# bsun exception mask
-set snan_mask,		0x00004000		# snan exception mask
-set operr_mask,		0x00002000		# operr exception mask
-set ovfl_mask,		0x00001000		# overflow exception mask
-set unfl_mask,		0x00000800		# underflow exception mask
-set dz_mask,		0x00000400		# dz exception mask
-set inex2_mask,		0x00000200		# inex2 exception mask
-set inex1_mask,		0x00000100		# inex1 exception mask
-
-set aiop_mask,		0x00000080		# accrued illegal operation
-set aovfl_mask,		0x00000040		# accrued overflow
-set aunfl_mask,		0x00000020		# accrued underflow
-set adz_mask,		0x00000010		# accrued divide by zero
-set ainex_mask,		0x00000008		# accrued inexact
-
-######################################
-# FPSR combinations used in the FPSP #
-######################################
-set dzinf_mask,		inf_mask+dz_mask+adz_mask
-set opnan_mask,		nan_mask+operr_mask+aiop_mask
-set nzi_mask,		0x01ffffff		#clears N, Z, and I
-set unfinx_mask,	unfl_mask+inex2_mask+aunfl_mask+ainex_mask
-set unf2inx_mask,	unfl_mask+inex2_mask+ainex_mask
-set ovfinx_mask,	ovfl_mask+inex2_mask+aovfl_mask+ainex_mask
-set inx1a_mask,		inex1_mask+ainex_mask
-set inx2a_mask,		inex2_mask+ainex_mask
-set snaniop_mask,	nan_mask+snan_mask+aiop_mask
-set snaniop2_mask,	snan_mask+aiop_mask
-set naniop_mask,	nan_mask+aiop_mask
-set neginf_mask,	neg_mask+inf_mask
-set infaiop_mask,	inf_mask+aiop_mask
-set negz_mask,		neg_mask+z_mask
-set opaop_mask,		operr_mask+aiop_mask
-set unfl_inx_mask,	unfl_mask+aunfl_mask+ainex_mask
-set ovfl_inx_mask,	ovfl_mask+aovfl_mask+ainex_mask
-
-#########
-# misc. #
-#########
-set rnd_stky_bit,	29			# stky bit pos in longword
-
-set sign_bit,		0x7			# sign bit
-set signan_bit,		0x6			# signalling nan bit
-
-set sgl_thresh,		0x3f81			# minimum sgl exponent
-set dbl_thresh,		0x3c01			# minimum dbl exponent
-
-set x_mode,		0x0			# extended precision
-set s_mode,		0x4			# single precision
-set d_mode,		0x8			# double precision
-
-set rn_mode,		0x0			# round-to-nearest
-set rz_mode,		0x1			# round-to-zero
-set rm_mode,		0x2			# round-tp-minus-infinity
-set rp_mode,		0x3			# round-to-plus-infinity
-
-set mantissalen,	64			# length of mantissa in bits
-
-set BYTE,		1			# len(byte) == 1 byte
-set WORD,		2			# len(word) == 2 bytes
-set LONG,		4			# len(longword) == 2 bytes
-
-set BSUN_VEC,		0xc0			# bsun    vector offset
-set INEX_VEC,		0xc4			# inexact vector offset
-set DZ_VEC,		0xc8			# dz      vector offset
-set UNFL_VEC,		0xcc			# unfl    vector offset
-set OPERR_VEC,		0xd0			# operr   vector offset
-set OVFL_VEC,		0xd4			# ovfl    vector offset
-set SNAN_VEC,		0xd8			# snan    vector offset
-
-###########################
-# SPecial CONDition FLaGs #
-###########################
-set ftrapcc_flg,	0x01			# flag bit: ftrapcc exception
-set fbsun_flg,		0x02			# flag bit: bsun exception
-set mia7_flg,		0x04			# flag bit: (a7)+ <ea>
-set mda7_flg,		0x08			# flag bit: -(a7) <ea>
-set fmovm_flg,		0x40			# flag bit: fmovm instruction
-set immed_flg,		0x80			# flag bit: &<data> <ea>
-
-set ftrapcc_bit,	0x0
-set fbsun_bit,		0x1
-set mia7_bit,		0x2
-set mda7_bit,		0x3
-set immed_bit,		0x7
-
-##################################
-# TRANSCENDENTAL "LAST-OP" FLAGS #
-##################################
-set FMUL_OP,		0x0			# fmul instr performed last
-set FDIV_OP,		0x1			# fdiv performed last
-set FADD_OP,		0x2			# fadd performed last
-set FMOV_OP,		0x3			# fmov performed last
-
-#############
-# CONSTANTS #
-#############
-T1:	long		0x40C62D38,0xD3D64634	# 16381 LOG2 LEAD
-T2:	long		0x3D6F90AE,0xB1E75CC7	# 16381 LOG2 TRAIL
-
-PI:	long		0x40000000,0xC90FDAA2,0x2168C235,0x00000000
-PIBY2:	long		0x3FFF0000,0xC90FDAA2,0x2168C235,0x00000000
-
-TWOBYPI:
-	long		0x3FE45F30,0x6DC9C883
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	_fpsp_ovfl(): 060FPSP entry point for FP Overflow exception.	#
-#									#
-#	This handler should be the first code executed upon taking the	#
-#	FP Overflow exception in an operating system.			#
-#									#
-# XREF ****************************************************************	#
-#	_imem_read_long() - read instruction longword			#
-#	fix_skewed_ops() - adjust src operand in fsave frame		#
-#	set_tag_x() - determine optype of src/dst operands		#
-#	store_fpreg() - store opclass 0 or 2 result to FP regfile	#
-#	unnorm_fix() - change UNNORM operands to NORM or ZERO		#
-#	load_fpn2() - load dst operand from FP regfile			#
-#	fout() - emulate an opclass 3 instruction			#
-#	tbl_unsupp - add of table of emulation routines for opclass 0,2	#
-#	_fpsp_done() - "callout" for 060FPSP exit (all work done!)	#
-#	_real_ovfl() - "callout" for Overflow exception enabled code	#
-#	_real_inex() - "callout" for Inexact exception enabled code	#
-#	_real_trace() - "callout" for Trace exception code		#
-#									#
-# INPUT ***************************************************************	#
-#	- The system stack contains the FP Ovfl exception stack frame	#
-#	- The fsave frame contains the source operand			#
-#									#
-# OUTPUT **************************************************************	#
-#	Overflow Exception enabled:					#
-#	- The system stack is unchanged					#
-#	- The fsave frame contains the adjusted src op for opclass 0,2	#
-#	Overflow Exception disabled:					#
-#	- The system stack is unchanged					#
-#	- The "exception present" flag in the fsave frame is cleared	#
-#									#
-# ALGORITHM ***********************************************************	#
-#	On the 060, if an FP overflow is present as the result of any	#
-# instruction, the 060 will take an overflow exception whether the	#
-# exception is enabled or disabled in the FPCR. For the disabled case,	#
-# This handler emulates the instruction to determine what the correct	#
-# default result should be for the operation. This default result is	#
-# then stored in either the FP regfile, data regfile, or memory.	#
-# Finally, the handler exits through the "callout" _fpsp_done()		#
-# denoting that no exceptional conditions exist within the machine.	#
-#	If the exception is enabled, then this handler must create the	#
-# exceptional operand and plave it in the fsave state frame, and store	#
-# the default result (only if the instruction is opclass 3). For	#
-# exceptions enabled, this handler must exit through the "callout"	#
-# _real_ovfl() so that the operating system enabled overflow handler	#
-# can handle this case.							#
-#	Two other conditions exist. First, if overflow was disabled	#
-# but the inexact exception was enabled, this handler must exit		#
-# through the "callout" _real_inex() regardless of whether the result	#
-# was inexact.								#
-#	Also, in the case of an opclass three instruction where		#
-# overflow was disabled and the trace exception was enabled, this	#
-# handler must exit through the "callout" _real_trace().		#
-#									#
-#########################################################################
-
-	global		_fpsp_ovfl
-_fpsp_ovfl:
-
-#$#	sub.l		&24,%sp			# make room for src/dst
-
-	link.w		%a6,&-LOCAL_SIZE	# init stack frame
-
-	fsave		FP_SRC(%a6)		# grab the "busy" frame
-
-	movm.l		&0x0303,EXC_DREGS(%a6)	# save d0-d1/a0-a1
-	fmovm.l		%fpcr,%fpsr,%fpiar,USER_FPCR(%a6) # save ctrl regs
-	fmovm.x		&0xc0,EXC_FPREGS(%a6)	# save fp0-fp1 on stack
-
-# the FPIAR holds the "current PC" of the faulting instruction
-	mov.l		USER_FPIAR(%a6),EXC_EXTWPTR(%a6)
-	mov.l		EXC_EXTWPTR(%a6),%a0	# fetch instruction addr
-	addq.l		&0x4,EXC_EXTWPTR(%a6)	# incr instruction ptr
-	bsr.l		_imem_read_long		# fetch the instruction words
-	mov.l		%d0,EXC_OPWORD(%a6)
-
-##############################################################################
-
-	btst		&0x5,EXC_CMDREG(%a6)	# is instr an fmove out?
-	bne.w		fovfl_out
-
-
-	lea		FP_SRC(%a6),%a0		# pass: ptr to src op
-	bsr.l		fix_skewed_ops		# fix src op
-
-# since, I believe, only NORMs and DENORMs can come through here,
-# maybe we can avoid the subroutine call.
-	lea		FP_SRC(%a6),%a0		# pass: ptr to src op
-	bsr.l		set_tag_x		# tag the operand type
-	mov.b		%d0,STAG(%a6)		# maybe NORM,DENORM
-
-# bit five of the fp extension word separates the monadic and dyadic operations
-# that can pass through fpsp_ovfl(). remember that fcmp, ftst, and fsincos
-# will never take this exception.
-	btst		&0x5,1+EXC_CMDREG(%a6)	# is operation monadic or dyadic?
-	beq.b		fovfl_extract		# monadic
-
-	bfextu		EXC_CMDREG(%a6){&6:&3},%d0 # dyadic; load dst reg
-	bsr.l		load_fpn2		# load dst into FP_DST
-
-	lea		FP_DST(%a6),%a0		# pass: ptr to dst op
-	bsr.l		set_tag_x		# tag the operand type
-	cmpi.b		%d0,&UNNORM		# is operand an UNNORM?
-	bne.b		fovfl_op2_done		# no
-	bsr.l		unnorm_fix		# yes; convert to NORM,DENORM,or ZERO
-fovfl_op2_done:
-	mov.b		%d0,DTAG(%a6)		# save dst optype tag
-
-fovfl_extract:
-
-#$#	mov.l		FP_SRC_EX(%a6),TRAP_SRCOP_EX(%a6)
-#$#	mov.l		FP_SRC_HI(%a6),TRAP_SRCOP_HI(%a6)
-#$#	mov.l		FP_SRC_LO(%a6),TRAP_SRCOP_LO(%a6)
-#$#	mov.l		FP_DST_EX(%a6),TRAP_DSTOP_EX(%a6)
-#$#	mov.l		FP_DST_HI(%a6),TRAP_DSTOP_HI(%a6)
-#$#	mov.l		FP_DST_LO(%a6),TRAP_DSTOP_LO(%a6)
-
-	clr.l		%d0
-	mov.b		FPCR_MODE(%a6),%d0	# pass rnd prec/mode
-
-	mov.b		1+EXC_CMDREG(%a6),%d1
-	andi.w		&0x007f,%d1		# extract extension
-
-	andi.l		&0x00ff01ff,USER_FPSR(%a6) # zero all but accured field
-
-	fmov.l		&0x0,%fpcr		# zero current control regs
-	fmov.l		&0x0,%fpsr
-
-	lea		FP_SRC(%a6),%a0
-	lea		FP_DST(%a6),%a1
-
-# maybe we can make these entry points ONLY the OVFL entry points of each routine.
-	mov.l		(tbl_unsupp.l,%pc,%d1.w*4),%d1 # fetch routine addr
-	jsr		(tbl_unsupp.l,%pc,%d1.l*1)
-
-# the operation has been emulated. the result is in fp0.
-# the EXOP, if an exception occurred, is in fp1.
-# we must save the default result regardless of whether
-# traps are enabled or disabled.
-	bfextu		EXC_CMDREG(%a6){&6:&3},%d0
-	bsr.l		store_fpreg
-
-# the exceptional possibilities we have left ourselves with are ONLY overflow
-# and inexact. and, the inexact is such that overflow occurred and was disabled
-# but inexact was enabled.
-	btst		&ovfl_bit,FPCR_ENABLE(%a6)
-	bne.b		fovfl_ovfl_on
-
-	btst		&inex2_bit,FPCR_ENABLE(%a6)
-	bne.b		fovfl_inex_on
-
-	fmovm.x		EXC_FPREGS(%a6),&0xc0	# restore fp0-fp1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-
-	unlk		%a6
-#$#	add.l		&24,%sp
-	bra.l		_fpsp_done
-
-# overflow is enabled AND overflow, of course, occurred. so, we have the EXOP
-# in fp1. now, simply jump to _real_ovfl()!
-fovfl_ovfl_on:
-	fmovm.x		&0x40,FP_SRC(%a6)	# save EXOP (fp1) to stack
-
-	mov.w		&0xe005,2+FP_SRC(%a6)	# save exc status
-
-	fmovm.x		EXC_FPREGS(%a6),&0xc0	# restore fp0-fp1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-
-	frestore	FP_SRC(%a6)		# do this after fmovm,other f<op>s!
-
-	unlk		%a6
-
-	bra.l		_real_ovfl
-
-# overflow occurred but is disabled. meanwhile, inexact is enabled. Therefore,
-# we must jump to real_inex().
-fovfl_inex_on:
-
-	fmovm.x		&0x40,FP_SRC(%a6)	# save EXOP (fp1) to stack
-
-	mov.b		&0xc4,1+EXC_VOFF(%a6)	# vector offset = 0xc4
-	mov.w		&0xe001,2+FP_SRC(%a6)	# save exc status
-
-	fmovm.x		EXC_FPREGS(%a6),&0xc0	# restore fp0-fp1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-
-	frestore	FP_SRC(%a6)		# do this after fmovm,other f<op>s!
-
-	unlk		%a6
-
-	bra.l		_real_inex
-
-########################################################################
-fovfl_out:
-
-
-#$#	mov.l		FP_SRC_EX(%a6),TRAP_SRCOP_EX(%a6)
-#$#	mov.l		FP_SRC_HI(%a6),TRAP_SRCOP_HI(%a6)
-#$#	mov.l		FP_SRC_LO(%a6),TRAP_SRCOP_LO(%a6)
-
-# the src operand is definitely a NORM(!), so tag it as such
-	mov.b		&NORM,STAG(%a6)		# set src optype tag
-
-	clr.l		%d0
-	mov.b		FPCR_MODE(%a6),%d0	# pass rnd prec/mode
-
-	and.l		&0xffff00ff,USER_FPSR(%a6) # zero all but accured field
-
-	fmov.l		&0x0,%fpcr		# zero current control regs
-	fmov.l		&0x0,%fpsr
-
-	lea		FP_SRC(%a6),%a0		# pass ptr to src operand
-
-	bsr.l		fout
-
-	btst		&ovfl_bit,FPCR_ENABLE(%a6)
-	bne.w		fovfl_ovfl_on
-
-	btst		&inex2_bit,FPCR_ENABLE(%a6)
-	bne.w		fovfl_inex_on
-
-	fmovm.x		EXC_FPREGS(%a6),&0xc0	# restore fp0-fp1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-
-	unlk		%a6
-#$#	add.l		&24,%sp
-
-	btst		&0x7,(%sp)		# is trace on?
-	beq.l		_fpsp_done		# no
-
-	fmov.l		%fpiar,0x8(%sp)		# "Current PC" is in FPIAR
-	mov.w		&0x2024,0x6(%sp)	# stk fmt = 0x2; voff = 0x024
-	bra.l		_real_trace
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	_fpsp_unfl(): 060FPSP entry point for FP Underflow exception.	#
-#									#
-#	This handler should be the first code executed upon taking the	#
-#	FP Underflow exception in an operating system.			#
-#									#
-# XREF ****************************************************************	#
-#	_imem_read_long() - read instruction longword			#
-#	fix_skewed_ops() - adjust src operand in fsave frame		#
-#	set_tag_x() - determine optype of src/dst operands		#
-#	store_fpreg() - store opclass 0 or 2 result to FP regfile	#
-#	unnorm_fix() - change UNNORM operands to NORM or ZERO		#
-#	load_fpn2() - load dst operand from FP regfile			#
-#	fout() - emulate an opclass 3 instruction			#
-#	tbl_unsupp - add of table of emulation routines for opclass 0,2	#
-#	_fpsp_done() - "callout" for 060FPSP exit (all work done!)	#
-#	_real_ovfl() - "callout" for Overflow exception enabled code	#
-#	_real_inex() - "callout" for Inexact exception enabled code	#
-#	_real_trace() - "callout" for Trace exception code		#
-#									#
-# INPUT ***************************************************************	#
-#	- The system stack contains the FP Unfl exception stack frame	#
-#	- The fsave frame contains the source operand			#
-#									#
-# OUTPUT **************************************************************	#
-#	Underflow Exception enabled:					#
-#	- The system stack is unchanged					#
-#	- The fsave frame contains the adjusted src op for opclass 0,2	#
-#	Underflow Exception disabled:					#
-#	- The system stack is unchanged					#
-#	- The "exception present" flag in the fsave frame is cleared	#
-#									#
-# ALGORITHM ***********************************************************	#
-#	On the 060, if an FP underflow is present as the result of any	#
-# instruction, the 060 will take an underflow exception whether the	#
-# exception is enabled or disabled in the FPCR. For the disabled case,	#
-# This handler emulates the instruction to determine what the correct	#
-# default result should be for the operation. This default result is	#
-# then stored in either the FP regfile, data regfile, or memory.	#
-# Finally, the handler exits through the "callout" _fpsp_done()		#
-# denoting that no exceptional conditions exist within the machine.	#
-#	If the exception is enabled, then this handler must create the	#
-# exceptional operand and plave it in the fsave state frame, and store	#
-# the default result (only if the instruction is opclass 3). For	#
-# exceptions enabled, this handler must exit through the "callout"	#
-# _real_unfl() so that the operating system enabled overflow handler	#
-# can handle this case.							#
-#	Two other conditions exist. First, if underflow was disabled	#
-# but the inexact exception was enabled and the result was inexact,	#
-# this handler must exit through the "callout" _real_inex().		#
-# was inexact.								#
-#	Also, in the case of an opclass three instruction where		#
-# underflow was disabled and the trace exception was enabled, this	#
-# handler must exit through the "callout" _real_trace().		#
-#									#
-#########################################################################
-
-	global		_fpsp_unfl
-_fpsp_unfl:
-
-#$#	sub.l		&24,%sp			# make room for src/dst
-
-	link.w		%a6,&-LOCAL_SIZE	# init stack frame
-
-	fsave		FP_SRC(%a6)		# grab the "busy" frame
-
-	movm.l		&0x0303,EXC_DREGS(%a6)	# save d0-d1/a0-a1
-	fmovm.l		%fpcr,%fpsr,%fpiar,USER_FPCR(%a6) # save ctrl regs
-	fmovm.x		&0xc0,EXC_FPREGS(%a6)	# save fp0-fp1 on stack
-
-# the FPIAR holds the "current PC" of the faulting instruction
-	mov.l		USER_FPIAR(%a6),EXC_EXTWPTR(%a6)
-	mov.l		EXC_EXTWPTR(%a6),%a0	# fetch instruction addr
-	addq.l		&0x4,EXC_EXTWPTR(%a6)	# incr instruction ptr
-	bsr.l		_imem_read_long		# fetch the instruction words
-	mov.l		%d0,EXC_OPWORD(%a6)
-
-##############################################################################
-
-	btst		&0x5,EXC_CMDREG(%a6)	# is instr an fmove out?
-	bne.w		funfl_out
-
-
-	lea		FP_SRC(%a6),%a0		# pass: ptr to src op
-	bsr.l		fix_skewed_ops		# fix src op
-
-	lea		FP_SRC(%a6),%a0		# pass: ptr to src op
-	bsr.l		set_tag_x		# tag the operand type
-	mov.b		%d0,STAG(%a6)		# maybe NORM,DENORM
-
-# bit five of the fp ext word separates the monadic and dyadic operations
-# that can pass through fpsp_unfl(). remember that fcmp, and ftst
-# will never take this exception.
-	btst		&0x5,1+EXC_CMDREG(%a6)	# is op monadic or dyadic?
-	beq.b		funfl_extract		# monadic
-
-# now, what's left that's not dyadic is fsincos. we can distinguish it
-# from all dyadics by the '0110xxx pattern
-	btst		&0x4,1+EXC_CMDREG(%a6)	# is op an fsincos?
-	bne.b		funfl_extract		# yes
-
-	bfextu		EXC_CMDREG(%a6){&6:&3},%d0 # dyadic; load dst reg
-	bsr.l		load_fpn2		# load dst into FP_DST
-
-	lea		FP_DST(%a6),%a0		# pass: ptr to dst op
-	bsr.l		set_tag_x		# tag the operand type
-	cmpi.b		%d0,&UNNORM		# is operand an UNNORM?
-	bne.b		funfl_op2_done		# no
-	bsr.l		unnorm_fix		# yes; convert to NORM,DENORM,or ZERO
-funfl_op2_done:
-	mov.b		%d0,DTAG(%a6)		# save dst optype tag
-
-funfl_extract:
-
-#$#	mov.l		FP_SRC_EX(%a6),TRAP_SRCOP_EX(%a6)
-#$#	mov.l		FP_SRC_HI(%a6),TRAP_SRCOP_HI(%a6)
-#$#	mov.l		FP_SRC_LO(%a6),TRAP_SRCOP_LO(%a6)
-#$#	mov.l		FP_DST_EX(%a6),TRAP_DSTOP_EX(%a6)
-#$#	mov.l		FP_DST_HI(%a6),TRAP_DSTOP_HI(%a6)
-#$#	mov.l		FP_DST_LO(%a6),TRAP_DSTOP_LO(%a6)
-
-	clr.l		%d0
-	mov.b		FPCR_MODE(%a6),%d0	# pass rnd prec/mode
-
-	mov.b		1+EXC_CMDREG(%a6),%d1
-	andi.w		&0x007f,%d1		# extract extension
-
-	andi.l		&0x00ff01ff,USER_FPSR(%a6)
-
-	fmov.l		&0x0,%fpcr		# zero current control regs
-	fmov.l		&0x0,%fpsr
-
-	lea		FP_SRC(%a6),%a0
-	lea		FP_DST(%a6),%a1
-
-# maybe we can make these entry points ONLY the OVFL entry points of each routine.
-	mov.l		(tbl_unsupp.l,%pc,%d1.w*4),%d1 # fetch routine addr
-	jsr		(tbl_unsupp.l,%pc,%d1.l*1)
-
-	bfextu		EXC_CMDREG(%a6){&6:&3},%d0
-	bsr.l		store_fpreg
-
-# The `060 FPU multiplier hardware is such that if the result of a
-# multiply operation is the smallest possible normalized number
-# (0x00000000_80000000_00000000), then the machine will take an
-# underflow exception. Since this is incorrect, we need to check
-# if our emulation, after re-doing the operation, decided that
-# no underflow was called for. We do these checks only in
-# funfl_{unfl,inex}_on() because w/ both exceptions disabled, this
-# special case will simply exit gracefully with the correct result.
-
-# the exceptional possibilities we have left ourselves with are ONLY overflow
-# and inexact. and, the inexact is such that overflow occurred and was disabled
-# but inexact was enabled.
-	btst		&unfl_bit,FPCR_ENABLE(%a6)
-	bne.b		funfl_unfl_on
-
-funfl_chkinex:
-	btst		&inex2_bit,FPCR_ENABLE(%a6)
-	bne.b		funfl_inex_on
-
-funfl_exit:
-	fmovm.x		EXC_FPREGS(%a6),&0xc0	# restore fp0-fp1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-
-	unlk		%a6
-#$#	add.l		&24,%sp
-	bra.l		_fpsp_done
-
-# overflow is enabled AND overflow, of course, occurred. so, we have the EXOP
-# in fp1 (don't forget to save fp0). what to do now?
-# well, we simply have to get to go to _real_unfl()!
-funfl_unfl_on:
-
-# The `060 FPU multiplier hardware is such that if the result of a
-# multiply operation is the smallest possible normalized number
-# (0x00000000_80000000_00000000), then the machine will take an
-# underflow exception. Since this is incorrect, we check here to see
-# if our emulation, after re-doing the operation, decided that
-# no underflow was called for.
-	btst		&unfl_bit,FPSR_EXCEPT(%a6)
-	beq.w		funfl_chkinex
-
-funfl_unfl_on2:
-	fmovm.x		&0x40,FP_SRC(%a6)	# save EXOP (fp1) to stack
-
-	mov.w		&0xe003,2+FP_SRC(%a6)	# save exc status
-
-	fmovm.x		EXC_FPREGS(%a6),&0xc0	# restore fp0-fp1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-
-	frestore	FP_SRC(%a6)		# do this after fmovm,other f<op>s!
-
-	unlk		%a6
-
-	bra.l		_real_unfl
-
-# underflow occurred but is disabled. meanwhile, inexact is enabled. Therefore,
-# we must jump to real_inex().
-funfl_inex_on:
-
-# The `060 FPU multiplier hardware is such that if the result of a
-# multiply operation is the smallest possible normalized number
-# (0x00000000_80000000_00000000), then the machine will take an
-# underflow exception.
-# But, whether bogus or not, if inexact is enabled AND it occurred,
-# then we have to branch to real_inex.
-
-	btst		&inex2_bit,FPSR_EXCEPT(%a6)
-	beq.w		funfl_exit
-
-funfl_inex_on2:
-
-	fmovm.x		&0x40,FP_SRC(%a6)	# save EXOP to stack
-
-	mov.b		&0xc4,1+EXC_VOFF(%a6)	# vector offset = 0xc4
-	mov.w		&0xe001,2+FP_SRC(%a6)	# save exc status
-
-	fmovm.x		EXC_FPREGS(%a6),&0xc0	# restore fp0-fp1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-
-	frestore	FP_SRC(%a6)		# do this after fmovm,other f<op>s!
-
-	unlk		%a6
-
-	bra.l		_real_inex
-
-#######################################################################
-funfl_out:
-
-
-#$#	mov.l		FP_SRC_EX(%a6),TRAP_SRCOP_EX(%a6)
-#$#	mov.l		FP_SRC_HI(%a6),TRAP_SRCOP_HI(%a6)
-#$#	mov.l		FP_SRC_LO(%a6),TRAP_SRCOP_LO(%a6)
-
-# the src operand is definitely a NORM(!), so tag it as such
-	mov.b		&NORM,STAG(%a6)		# set src optype tag
-
-	clr.l		%d0
-	mov.b		FPCR_MODE(%a6),%d0	# pass rnd prec/mode
-
-	and.l		&0xffff00ff,USER_FPSR(%a6) # zero all but accured field
-
-	fmov.l		&0x0,%fpcr		# zero current control regs
-	fmov.l		&0x0,%fpsr
-
-	lea		FP_SRC(%a6),%a0		# pass ptr to src operand
-
-	bsr.l		fout
-
-	btst		&unfl_bit,FPCR_ENABLE(%a6)
-	bne.w		funfl_unfl_on2
-
-	btst		&inex2_bit,FPCR_ENABLE(%a6)
-	bne.w		funfl_inex_on2
-
-	fmovm.x		EXC_FPREGS(%a6),&0xc0	# restore fp0-fp1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-
-	unlk		%a6
-#$#	add.l		&24,%sp
-
-	btst		&0x7,(%sp)		# is trace on?
-	beq.l		_fpsp_done		# no
-
-	fmov.l		%fpiar,0x8(%sp)		# "Current PC" is in FPIAR
-	mov.w		&0x2024,0x6(%sp)	# stk fmt = 0x2; voff = 0x024
-	bra.l		_real_trace
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	_fpsp_unsupp(): 060FPSP entry point for FP "Unimplemented	#
-#		        Data Type" exception.				#
-#									#
-#	This handler should be the first code executed upon taking the	#
-#	FP Unimplemented Data Type exception in an operating system.	#
-#									#
-# XREF ****************************************************************	#
-#	_imem_read_{word,long}() - read instruction word/longword	#
-#	fix_skewed_ops() - adjust src operand in fsave frame		#
-#	set_tag_x() - determine optype of src/dst operands		#
-#	store_fpreg() - store opclass 0 or 2 result to FP regfile	#
-#	unnorm_fix() - change UNNORM operands to NORM or ZERO		#
-#	load_fpn2() - load dst operand from FP regfile			#
-#	load_fpn1() - load src operand from FP regfile			#
-#	fout() - emulate an opclass 3 instruction			#
-#	tbl_unsupp - add of table of emulation routines for opclass 0,2	#
-#	_real_inex() - "callout" to operating system inexact handler	#
-#	_fpsp_done() - "callout" for exit; work all done		#
-#	_real_trace() - "callout" for Trace enabled exception		#
-#	funimp_skew() - adjust fsave src ops to "incorrect" value	#
-#	_real_snan() - "callout" for SNAN exception			#
-#	_real_operr() - "callout" for OPERR exception			#
-#	_real_ovfl() - "callout" for OVFL exception			#
-#	_real_unfl() - "callout" for UNFL exception			#
-#	get_packed() - fetch packed operand from memory			#
-#									#
-# INPUT ***************************************************************	#
-#	- The system stack contains the "Unimp Data Type" stk frame	#
-#	- The fsave frame contains the ssrc op (for UNNORM/DENORM)	#
-#									#
-# OUTPUT **************************************************************	#
-#	If Inexact exception (opclass 3):				#
-#	- The system stack is changed to an Inexact exception stk frame	#
-#	If SNAN exception (opclass 3):					#
-#	- The system stack is changed to an SNAN exception stk frame	#
-#	If OPERR exception (opclass 3):					#
-#	- The system stack is changed to an OPERR exception stk frame	#
-#	If OVFL exception (opclass 3):					#
-#	- The system stack is changed to an OVFL exception stk frame	#
-#	If UNFL exception (opclass 3):					#
-#	- The system stack is changed to an UNFL exception stack frame	#
-#	If Trace exception enabled:					#
-#	- The system stack is changed to a Trace exception stack frame	#
-#	Else: (normal case)						#
-#	- Correct result has been stored as appropriate			#
-#									#
-# ALGORITHM ***********************************************************	#
-#	Two main instruction types can enter here: (1) DENORM or UNNORM	#
-# unimplemented data types. These can be either opclass 0,2 or 3	#
-# instructions, and (2) PACKED unimplemented data format instructions	#
-# also of opclasses 0,2, or 3.						#
-#	For UNNORM/DENORM opclass 0 and 2, the handler fetches the src	#
-# operand from the fsave state frame and the dst operand (if dyadic)	#
-# from the FP register file. The instruction is then emulated by	#
-# choosing an emulation routine from a table of routines indexed by	#
-# instruction type. Once the instruction has been emulated and result	#
-# saved, then we check to see if any enabled exceptions resulted from	#
-# instruction emulation. If none, then we exit through the "callout"	#
-# _fpsp_done(). If there is an enabled FP exception, then we insert	#
-# this exception into the FPU in the fsave state frame and then exit	#
-# through _fpsp_done().							#
-#	PACKED opclass 0 and 2 is similar in how the instruction is	#
-# emulated and exceptions handled. The differences occur in how the	#
-# handler loads the packed op (by calling get_packed() routine) and	#
-# by the fact that a Trace exception could be pending for PACKED ops.	#
-# If a Trace exception is pending, then the current exception stack	#
-# frame is changed to a Trace exception stack frame and an exit is	#
-# made through _real_trace().						#
-#	For UNNORM/DENORM opclass 3, the actual move out to memory is	#
-# performed by calling the routine fout(). If no exception should occur	#
-# as the result of emulation, then an exit either occurs through	#
-# _fpsp_done() or through _real_trace() if a Trace exception is pending	#
-# (a Trace stack frame must be created here, too). If an FP exception	#
-# should occur, then we must create an exception stack frame of that	#
-# type and jump to either _real_snan(), _real_operr(), _real_inex(),	#
-# _real_unfl(), or _real_ovfl() as appropriate. PACKED opclass 3	#
-# emulation is performed in a similar manner.				#
-#									#
-#########################################################################
-
-#
-# (1) DENORM and UNNORM (unimplemented) data types:
-#
-#				post-instruction
-#				*****************
-#				*      EA	*
-#	 pre-instruction	*		*
-#	*****************	*****************
-#	* 0x0 *  0x0dc  *	* 0x3 *  0x0dc  *
-#	*****************	*****************
-#	*     Next	*	*     Next	*
-#	*      PC	*	*      PC	*
-#	*****************	*****************
-#	*      SR	*	*      SR	*
-#	*****************	*****************
-#
-# (2) PACKED format (unsupported) opclasses two and three:
-#	*****************
-#	*      EA	*
-#	*		*
-#	*****************
-#	* 0x2 *  0x0dc	*
-#	*****************
-#	*     Next	*
-#	*      PC	*
-#	*****************
-#	*      SR	*
-#	*****************
-#
-	global		_fpsp_unsupp
-_fpsp_unsupp:
-
-	link.w		%a6,&-LOCAL_SIZE	# init stack frame
-
-	fsave		FP_SRC(%a6)		# save fp state
-
-	movm.l		&0x0303,EXC_DREGS(%a6)	# save d0-d1/a0-a1
-	fmovm.l		%fpcr,%fpsr,%fpiar,USER_FPCR(%a6) # save ctrl regs
-	fmovm.x		&0xc0,EXC_FPREGS(%a6)	# save fp0-fp1 on stack
-
-	btst		&0x5,EXC_SR(%a6)	# user or supervisor mode?
-	bne.b		fu_s
-fu_u:
-	mov.l		%usp,%a0		# fetch user stack pointer
-	mov.l		%a0,EXC_A7(%a6)		# save on stack
-	bra.b		fu_cont
-# if the exception is an opclass zero or two unimplemented data type
-# exception, then the a7' calculated here is wrong since it doesn't
-# stack an ea. however, we don't need an a7' for this case anyways.
-fu_s:
-	lea		0x4+EXC_EA(%a6),%a0	# load old a7'
-	mov.l		%a0,EXC_A7(%a6)		# save on stack
-
-fu_cont:
-
-# the FPIAR holds the "current PC" of the faulting instruction
-# the FPIAR should be set correctly for ALL exceptions passing through
-# this point.
-	mov.l		USER_FPIAR(%a6),EXC_EXTWPTR(%a6)
-	mov.l		EXC_EXTWPTR(%a6),%a0	# fetch instruction addr
-	addq.l		&0x4,EXC_EXTWPTR(%a6)	# incr instruction ptr
-	bsr.l		_imem_read_long		# fetch the instruction words
-	mov.l		%d0,EXC_OPWORD(%a6)	# store OPWORD and EXTWORD
-
-############################
-
-	clr.b		SPCOND_FLG(%a6)		# clear special condition flag
-
-# Separate opclass three (fpn-to-mem) ops since they have a different
-# stack frame and protocol.
-	btst		&0x5,EXC_CMDREG(%a6)	# is it an fmove out?
-	bne.w		fu_out			# yes
-
-# Separate packed opclass two instructions.
-	bfextu		EXC_CMDREG(%a6){&0:&6},%d0
-	cmpi.b		%d0,&0x13
-	beq.w		fu_in_pack
-
-
-# I'm not sure at this point what FPSR bits are valid for this instruction.
-# so, since the emulation routines re-create them anyways, zero exception field
-	andi.l		&0x00ff00ff,USER_FPSR(%a6) # zero exception field
-
-	fmov.l		&0x0,%fpcr		# zero current control regs
-	fmov.l		&0x0,%fpsr
-
-# Opclass two w/ memory-to-fpn operation will have an incorrect extended
-# precision format if the src format was single or double and the
-# source data type was an INF, NAN, DENORM, or UNNORM
-	lea		FP_SRC(%a6),%a0		# pass ptr to input
-	bsr.l		fix_skewed_ops
-
-# we don't know whether the src operand or the dst operand (or both) is the
-# UNNORM or DENORM. call the function that tags the operand type. if the
-# input is an UNNORM, then convert it to a NORM, DENORM, or ZERO.
-	lea		FP_SRC(%a6),%a0		# pass: ptr to src op
-	bsr.l		set_tag_x		# tag the operand type
-	cmpi.b		%d0,&UNNORM		# is operand an UNNORM?
-	bne.b		fu_op2			# no
-	bsr.l		unnorm_fix		# yes; convert to NORM,DENORM,or ZERO
-
-fu_op2:
-	mov.b		%d0,STAG(%a6)		# save src optype tag
-
-	bfextu		EXC_CMDREG(%a6){&6:&3},%d0 # dyadic; load dst reg
-
-# bit five of the fp extension word separates the monadic and dyadic operations
-# at this point
-	btst		&0x5,1+EXC_CMDREG(%a6)	# is operation monadic or dyadic?
-	beq.b		fu_extract		# monadic
-	cmpi.b		1+EXC_CMDREG(%a6),&0x3a	# is operation an ftst?
-	beq.b		fu_extract		# yes, so it's monadic, too
-
-	bsr.l		load_fpn2		# load dst into FP_DST
-
-	lea		FP_DST(%a6),%a0		# pass: ptr to dst op
-	bsr.l		set_tag_x		# tag the operand type
-	cmpi.b		%d0,&UNNORM		# is operand an UNNORM?
-	bne.b		fu_op2_done		# no
-	bsr.l		unnorm_fix		# yes; convert to NORM,DENORM,or ZERO
-fu_op2_done:
-	mov.b		%d0,DTAG(%a6)		# save dst optype tag
-
-fu_extract:
-	clr.l		%d0
-	mov.b		FPCR_MODE(%a6),%d0	# fetch rnd mode/prec
-
-	bfextu		1+EXC_CMDREG(%a6){&1:&7},%d1 # extract extension
-
-	lea		FP_SRC(%a6),%a0
-	lea		FP_DST(%a6),%a1
-
-	mov.l		(tbl_unsupp.l,%pc,%d1.l*4),%d1 # fetch routine addr
-	jsr		(tbl_unsupp.l,%pc,%d1.l*1)
-
-#
-# Exceptions in order of precedence:
-#	BSUN	: none
-#	SNAN	: all dyadic ops
-#	OPERR	: fsqrt(-NORM)
-#	OVFL	: all except ftst,fcmp
-#	UNFL	: all except ftst,fcmp
-#	DZ	: fdiv
-#	INEX2	: all except ftst,fcmp
-#	INEX1	: none (packed doesn't go through here)
-#
-
-# we determine the highest priority exception(if any) set by the
-# emulation routine that has also been enabled by the user.
-	mov.b		FPCR_ENABLE(%a6),%d0	# fetch exceptions set
-	bne.b		fu_in_ena		# some are enabled
-
-fu_in_cont:
-# fcmp and ftst do not store any result.
-	mov.b		1+EXC_CMDREG(%a6),%d0	# fetch extension
-	andi.b		&0x38,%d0		# extract bits 3-5
-	cmpi.b		%d0,&0x38		# is instr fcmp or ftst?
-	beq.b		fu_in_exit		# yes
-
-	bfextu		EXC_CMDREG(%a6){&6:&3},%d0 # dyadic; load dst reg
-	bsr.l		store_fpreg		# store the result
-
-fu_in_exit:
-
-	fmovm.x		EXC_FPREGS(%a6),&0xc0	# restore fp0/fp1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-
-	unlk		%a6
-
-	bra.l		_fpsp_done
-
-fu_in_ena:
-	and.b		FPSR_EXCEPT(%a6),%d0	# keep only ones enabled
-	bfffo		%d0{&24:&8},%d0		# find highest priority exception
-	bne.b		fu_in_exc		# there is at least one set
-
-#
-# No exceptions occurred that were also enabled. Now:
-#
-#	if (OVFL && ovfl_disabled && inexact_enabled) {
-#	    branch to _real_inex() (even if the result was exact!);
-#	} else {
-#	    save the result in the proper fp reg (unless the op is fcmp or ftst);
-#	    return;
-#	}
-#
-	btst		&ovfl_bit,FPSR_EXCEPT(%a6) # was overflow set?
-	beq.b		fu_in_cont		# no
-
-fu_in_ovflchk:
-	btst		&inex2_bit,FPCR_ENABLE(%a6) # was inexact enabled?
-	beq.b		fu_in_cont		# no
-	bra.w		fu_in_exc_ovfl		# go insert overflow frame
-
-#
-# An exception occurred and that exception was enabled:
-#
-#	shift enabled exception field into lo byte of d0;
-#	if (((INEX2 || INEX1) && inex_enabled && OVFL && ovfl_disabled) ||
-#	    ((INEX2 || INEX1) && inex_enabled && UNFL && unfl_disabled)) {
-#		/*
-#		 * this is the case where we must call _real_inex() now or else
-#		 * there will be no other way to pass it the exceptional operand
-#		 */
-#		call _real_inex();
-#	} else {
-#		restore exc state (SNAN||OPERR||OVFL||UNFL||DZ||INEX) into the FPU;
-#	}
-#
-fu_in_exc:
-	subi.l		&24,%d0			# fix offset to be 0-8
-	cmpi.b		%d0,&0x6		# is exception INEX? (6)
-	bne.b		fu_in_exc_exit		# no
-
-# the enabled exception was inexact
-	btst		&unfl_bit,FPSR_EXCEPT(%a6) # did disabled underflow occur?
-	bne.w		fu_in_exc_unfl		# yes
-	btst		&ovfl_bit,FPSR_EXCEPT(%a6) # did disabled overflow occur?
-	bne.w		fu_in_exc_ovfl		# yes
-
-# here, we insert the correct fsave status value into the fsave frame for the
-# corresponding exception. the operand in the fsave frame should be the original
-# src operand.
-fu_in_exc_exit:
-	mov.l		%d0,-(%sp)		# save d0
-	bsr.l		funimp_skew		# skew sgl or dbl inputs
-	mov.l		(%sp)+,%d0		# restore d0
-
-	mov.w		(tbl_except.b,%pc,%d0.w*2),2+FP_SRC(%a6) # create exc status
-
-	fmovm.x		EXC_FPREGS(%a6),&0xc0	# restore fp0/fp1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-
-	frestore	FP_SRC(%a6)		# restore src op
-
-	unlk		%a6
-
-	bra.l		_fpsp_done
-
-tbl_except:
-	short		0xe000,0xe006,0xe004,0xe005
-	short		0xe003,0xe002,0xe001,0xe001
-
-fu_in_exc_unfl:
-	mov.w		&0x4,%d0
-	bra.b		fu_in_exc_exit
-fu_in_exc_ovfl:
-	mov.w		&0x03,%d0
-	bra.b		fu_in_exc_exit
-
-# If the input operand to this operation was opclass two and a single
-# or double precision denorm, inf, or nan, the operand needs to be
-# "corrected" in order to have the proper equivalent extended precision
-# number.
-	global		fix_skewed_ops
-fix_skewed_ops:
-	bfextu		EXC_CMDREG(%a6){&0:&6},%d0 # extract opclass,src fmt
-	cmpi.b		%d0,&0x11		# is class = 2 & fmt = sgl?
-	beq.b		fso_sgl			# yes
-	cmpi.b		%d0,&0x15		# is class = 2 & fmt = dbl?
-	beq.b		fso_dbl			# yes
-	rts					# no
-
-fso_sgl:
-	mov.w		LOCAL_EX(%a0),%d0	# fetch src exponent
-	andi.w		&0x7fff,%d0		# strip sign
-	cmpi.w		%d0,&0x3f80		# is |exp| == $3f80?
-	beq.b		fso_sgl_dnrm_zero	# yes
-	cmpi.w		%d0,&0x407f		# no; is |exp| == $407f?
-	beq.b		fso_infnan		# yes
-	rts					# no
-
-fso_sgl_dnrm_zero:
-	andi.l		&0x7fffffff,LOCAL_HI(%a0) # clear j-bit
-	beq.b		fso_zero		# it's a skewed zero
-fso_sgl_dnrm:
-# here, we count on norm not to alter a0...
-	bsr.l		norm			# normalize mantissa
-	neg.w		%d0			# -shft amt
-	addi.w		&0x3f81,%d0		# adjust new exponent
-	andi.w		&0x8000,LOCAL_EX(%a0)	# clear old exponent
-	or.w		%d0,LOCAL_EX(%a0)	# insert new exponent
-	rts
-
-fso_zero:
-	andi.w		&0x8000,LOCAL_EX(%a0)	# clear bogus exponent
-	rts
-
-fso_infnan:
-	andi.b		&0x7f,LOCAL_HI(%a0)	# clear j-bit
-	ori.w		&0x7fff,LOCAL_EX(%a0)	# make exponent = $7fff
-	rts
-
-fso_dbl:
-	mov.w		LOCAL_EX(%a0),%d0	# fetch src exponent
-	andi.w		&0x7fff,%d0		# strip sign
-	cmpi.w		%d0,&0x3c00		# is |exp| == $3c00?
-	beq.b		fso_dbl_dnrm_zero	# yes
-	cmpi.w		%d0,&0x43ff		# no; is |exp| == $43ff?
-	beq.b		fso_infnan		# yes
-	rts					# no
-
-fso_dbl_dnrm_zero:
-	andi.l		&0x7fffffff,LOCAL_HI(%a0) # clear j-bit
-	bne.b		fso_dbl_dnrm		# it's a skewed denorm
-	tst.l		LOCAL_LO(%a0)		# is it a zero?
-	beq.b		fso_zero		# yes
-fso_dbl_dnrm:
-# here, we count on norm not to alter a0...
-	bsr.l		norm			# normalize mantissa
-	neg.w		%d0			# -shft amt
-	addi.w		&0x3c01,%d0		# adjust new exponent
-	andi.w		&0x8000,LOCAL_EX(%a0)	# clear old exponent
-	or.w		%d0,LOCAL_EX(%a0)	# insert new exponent
-	rts
-
-#################################################################
-
-# fmove out took an unimplemented data type exception.
-# the src operand is in FP_SRC. Call _fout() to write out the result and
-# to determine which exceptions, if any, to take.
-fu_out:
-
-# Separate packed move outs from the UNNORM and DENORM move outs.
-	bfextu		EXC_CMDREG(%a6){&3:&3},%d0
-	cmpi.b		%d0,&0x3
-	beq.w		fu_out_pack
-	cmpi.b		%d0,&0x7
-	beq.w		fu_out_pack
-
-
-# I'm not sure at this point what FPSR bits are valid for this instruction.
-# so, since the emulation routines re-create them anyways, zero exception field.
-# fmove out doesn't affect ccodes.
-	and.l		&0xffff00ff,USER_FPSR(%a6) # zero exception field
-
-	fmov.l		&0x0,%fpcr		# zero current control regs
-	fmov.l		&0x0,%fpsr
-
-# the src can ONLY be a DENORM or an UNNORM! so, don't make any big subroutine
-# call here. just figure out what it is...
-	mov.w		FP_SRC_EX(%a6),%d0	# get exponent
-	andi.w		&0x7fff,%d0		# strip sign
-	beq.b		fu_out_denorm		# it's a DENORM
-
-	lea		FP_SRC(%a6),%a0
-	bsr.l		unnorm_fix		# yes; fix it
-
-	mov.b		%d0,STAG(%a6)
-
-	bra.b		fu_out_cont
-fu_out_denorm:
-	mov.b		&DENORM,STAG(%a6)
-fu_out_cont:
-
-	clr.l		%d0
-	mov.b		FPCR_MODE(%a6),%d0	# fetch rnd mode/prec
-
-	lea		FP_SRC(%a6),%a0		# pass ptr to src operand
-
-	mov.l		(%a6),EXC_A6(%a6)	# in case a6 changes
-	bsr.l		fout			# call fmove out routine
-
-# Exceptions in order of precedence:
-#	BSUN	: none
-#	SNAN	: none
-#	OPERR	: fmove.{b,w,l} out of large UNNORM
-#	OVFL	: fmove.{s,d}
-#	UNFL	: fmove.{s,d,x}
-#	DZ	: none
-#	INEX2	: all
-#	INEX1	: none (packed doesn't travel through here)
-
-# determine the highest priority exception(if any) set by the
-# emulation routine that has also been enabled by the user.
-	mov.b		FPCR_ENABLE(%a6),%d0	# fetch exceptions enabled
-	bne.w		fu_out_ena		# some are enabled
-
-fu_out_done:
-
-	mov.l		EXC_A6(%a6),(%a6)	# in case a6 changed
-
-# on extended precision opclass three instructions using pre-decrement or
-# post-increment addressing mode, the address register is not updated. is the
-# address register was the stack pointer used from user mode, then let's update
-# it here. if it was used from supervisor mode, then we have to handle this
-# as a special case.
-	btst		&0x5,EXC_SR(%a6)
-	bne.b		fu_out_done_s
-
-	mov.l		EXC_A7(%a6),%a0		# restore a7
-	mov.l		%a0,%usp
-
-fu_out_done_cont:
-	fmovm.x		EXC_FPREGS(%a6),&0xc0	# restore fp0/fp1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-
-	unlk		%a6
-
-	btst		&0x7,(%sp)		# is trace on?
-	bne.b		fu_out_trace		# yes
-
-	bra.l		_fpsp_done
-
-# is the ea mode pre-decrement of the stack pointer from supervisor mode?
-# ("fmov.x fpm,-(a7)") if so,
-fu_out_done_s:
-	cmpi.b		SPCOND_FLG(%a6),&mda7_flg
-	bne.b		fu_out_done_cont
-
-# the extended precision result is still in fp0. but, we need to save it
-# somewhere on the stack until we can copy it to its final resting place.
-# here, we're counting on the top of the stack to be the old place-holders
-# for fp0/fp1 which have already been restored. that way, we can write
-# over those destinations with the shifted stack frame.
-	fmovm.x		&0x80,FP_SRC(%a6)	# put answer on stack
-
-	fmovm.x		EXC_FPREGS(%a6),&0xc0	# restore fp0/fp1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-
-	mov.l		(%a6),%a6		# restore frame pointer
-
-	mov.l		LOCAL_SIZE+EXC_SR(%sp),LOCAL_SIZE+EXC_SR-0xc(%sp)
-	mov.l		LOCAL_SIZE+2+EXC_PC(%sp),LOCAL_SIZE+2+EXC_PC-0xc(%sp)
-
-# now, copy the result to the proper place on the stack
-	mov.l		LOCAL_SIZE+FP_SRC_EX(%sp),LOCAL_SIZE+EXC_SR+0x0(%sp)
-	mov.l		LOCAL_SIZE+FP_SRC_HI(%sp),LOCAL_SIZE+EXC_SR+0x4(%sp)
-	mov.l		LOCAL_SIZE+FP_SRC_LO(%sp),LOCAL_SIZE+EXC_SR+0x8(%sp)
-
-	add.l		&LOCAL_SIZE-0x8,%sp
-
-	btst		&0x7,(%sp)
-	bne.b		fu_out_trace
-
-	bra.l		_fpsp_done
-
-fu_out_ena:
-	and.b		FPSR_EXCEPT(%a6),%d0	# keep only ones enabled
-	bfffo		%d0{&24:&8},%d0		# find highest priority exception
-	bne.b		fu_out_exc		# there is at least one set
-
-# no exceptions were set.
-# if a disabled overflow occurred and inexact was enabled but the result
-# was exact, then a branch to _real_inex() is made.
-	btst		&ovfl_bit,FPSR_EXCEPT(%a6) # was overflow set?
-	beq.w		fu_out_done		# no
-
-fu_out_ovflchk:
-	btst		&inex2_bit,FPCR_ENABLE(%a6) # was inexact enabled?
-	beq.w		fu_out_done		# no
-	bra.w		fu_inex			# yes
-
-#
-# The fp move out that took the "Unimplemented Data Type" exception was
-# being traced. Since the stack frames are similar, get the "current" PC
-# from FPIAR and put it in the trace stack frame then jump to _real_trace().
-#
-#		  UNSUPP FRAME		   TRACE FRAME
-#		*****************	*****************
-#		*      EA	*	*    Current	*
-#		*		*	*      PC	*
-#		*****************	*****************
-#		* 0x3 *  0x0dc	*	* 0x2 *  0x024	*
-#		*****************	*****************
-#		*     Next	*	*     Next	*
-#		*      PC	*	*      PC	*
-#		*****************	*****************
-#		*      SR	*	*      SR	*
-#		*****************	*****************
-#
-fu_out_trace:
-	mov.w		&0x2024,0x6(%sp)
-	fmov.l		%fpiar,0x8(%sp)
-	bra.l		_real_trace
-
-# an exception occurred and that exception was enabled.
-fu_out_exc:
-	subi.l		&24,%d0			# fix offset to be 0-8
-
-# we don't mess with the existing fsave frame. just re-insert it and
-# jump to the "_real_{}()" handler...
-	mov.w		(tbl_fu_out.b,%pc,%d0.w*2),%d0
-	jmp		(tbl_fu_out.b,%pc,%d0.w*1)
-
-	swbeg		&0x8
-tbl_fu_out:
-	short		tbl_fu_out	- tbl_fu_out	# BSUN can't happen
-	short		tbl_fu_out	- tbl_fu_out	# SNAN can't happen
-	short		fu_operr	- tbl_fu_out	# OPERR
-	short		fu_ovfl		- tbl_fu_out	# OVFL
-	short		fu_unfl		- tbl_fu_out	# UNFL
-	short		tbl_fu_out	- tbl_fu_out	# DZ can't happen
-	short		fu_inex		- tbl_fu_out	# INEX2
-	short		tbl_fu_out	- tbl_fu_out	# INEX1 won't make it here
-
-# for snan,operr,ovfl,unfl, src op is still in FP_SRC so just
-# frestore it.
-fu_snan:
-	fmovm.x		EXC_FPREGS(%a6),&0xc0	# restore fp0/fp1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-
-	mov.w		&0x30d8,EXC_VOFF(%a6)	# vector offset = 0xd8
-	mov.w		&0xe006,2+FP_SRC(%a6)
-
-	frestore	FP_SRC(%a6)
-
-	unlk		%a6
-
-
-	bra.l		_real_snan
-
-fu_operr:
-	fmovm.x		EXC_FPREGS(%a6),&0xc0	# restore fp0/fp1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-
-	mov.w		&0x30d0,EXC_VOFF(%a6)	# vector offset = 0xd0
-	mov.w		&0xe004,2+FP_SRC(%a6)
-
-	frestore	FP_SRC(%a6)
-
-	unlk		%a6
-
-
-	bra.l		_real_operr
-
-fu_ovfl:
-	fmovm.x		&0x40,FP_SRC(%a6)	# save EXOP to the stack
-
-	fmovm.x		EXC_FPREGS(%a6),&0xc0	# restore fp0/fp1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-
-	mov.w		&0x30d4,EXC_VOFF(%a6)	# vector offset = 0xd4
-	mov.w		&0xe005,2+FP_SRC(%a6)
-
-	frestore	FP_SRC(%a6)		# restore EXOP
-
-	unlk		%a6
-
-	bra.l		_real_ovfl
-
-# underflow can happen for extended precision. extended precision opclass
-# three instruction exceptions don't update the stack pointer. so, if the
-# exception occurred from user mode, then simply update a7 and exit normally.
-# if the exception occurred from supervisor mode, check if
-fu_unfl:
-	mov.l		EXC_A6(%a6),(%a6)	# restore a6
-
-	btst		&0x5,EXC_SR(%a6)
-	bne.w		fu_unfl_s
-
-	mov.l		EXC_A7(%a6),%a0		# restore a7 whether we need
-	mov.l		%a0,%usp		# to or not...
-
-fu_unfl_cont:
-	fmovm.x		&0x40,FP_SRC(%a6)	# save EXOP to the stack
-
-	fmovm.x		EXC_FPREGS(%a6),&0xc0	# restore fp0/fp1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-
-	mov.w		&0x30cc,EXC_VOFF(%a6)	# vector offset = 0xcc
-	mov.w		&0xe003,2+FP_SRC(%a6)
-
-	frestore	FP_SRC(%a6)		# restore EXOP
-
-	unlk		%a6
-
-	bra.l		_real_unfl
-
-fu_unfl_s:
-	cmpi.b		SPCOND_FLG(%a6),&mda7_flg # was the <ea> mode -(sp)?
-	bne.b		fu_unfl_cont
-
-# the extended precision result is still in fp0. but, we need to save it
-# somewhere on the stack until we can copy it to its final resting place
-# (where the exc frame is currently). make sure it's not at the top of the
-# frame or it will get overwritten when the exc stack frame is shifted "down".
-	fmovm.x		&0x80,FP_SRC(%a6)	# put answer on stack
-	fmovm.x		&0x40,FP_DST(%a6)	# put EXOP on stack
-
-	fmovm.x		EXC_FPREGS(%a6),&0xc0	# restore fp0/fp1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-
-	mov.w		&0x30cc,EXC_VOFF(%a6)	# vector offset = 0xcc
-	mov.w		&0xe003,2+FP_DST(%a6)
-
-	frestore	FP_DST(%a6)		# restore EXOP
-
-	mov.l		(%a6),%a6		# restore frame pointer
-
-	mov.l		LOCAL_SIZE+EXC_SR(%sp),LOCAL_SIZE+EXC_SR-0xc(%sp)
-	mov.l		LOCAL_SIZE+2+EXC_PC(%sp),LOCAL_SIZE+2+EXC_PC-0xc(%sp)
-	mov.l		LOCAL_SIZE+EXC_EA(%sp),LOCAL_SIZE+EXC_EA-0xc(%sp)
-
-# now, copy the result to the proper place on the stack
-	mov.l		LOCAL_SIZE+FP_SRC_EX(%sp),LOCAL_SIZE+EXC_SR+0x0(%sp)
-	mov.l		LOCAL_SIZE+FP_SRC_HI(%sp),LOCAL_SIZE+EXC_SR+0x4(%sp)
-	mov.l		LOCAL_SIZE+FP_SRC_LO(%sp),LOCAL_SIZE+EXC_SR+0x8(%sp)
-
-	add.l		&LOCAL_SIZE-0x8,%sp
-
-	bra.l		_real_unfl
-
-# fmove in and out enter here.
-fu_inex:
-	fmovm.x		&0x40,FP_SRC(%a6)	# save EXOP to the stack
-
-	fmovm.x		EXC_FPREGS(%a6),&0xc0	# restore fp0/fp1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-
-	mov.w		&0x30c4,EXC_VOFF(%a6)	# vector offset = 0xc4
-	mov.w		&0xe001,2+FP_SRC(%a6)
-
-	frestore	FP_SRC(%a6)		# restore EXOP
-
-	unlk		%a6
-
-
-	bra.l		_real_inex
-
-#########################################################################
-#########################################################################
-fu_in_pack:
-
-
-# I'm not sure at this point what FPSR bits are valid for this instruction.
-# so, since the emulation routines re-create them anyways, zero exception field
-	andi.l		&0x0ff00ff,USER_FPSR(%a6) # zero exception field
-
-	fmov.l		&0x0,%fpcr		# zero current control regs
-	fmov.l		&0x0,%fpsr
-
-	bsr.l		get_packed		# fetch packed src operand
-
-	lea		FP_SRC(%a6),%a0		# pass ptr to src
-	bsr.l		set_tag_x		# set src optype tag
-
-	mov.b		%d0,STAG(%a6)		# save src optype tag
-
-	bfextu		EXC_CMDREG(%a6){&6:&3},%d0 # dyadic; load dst reg
-
-# bit five of the fp extension word separates the monadic and dyadic operations
-# at this point
-	btst		&0x5,1+EXC_CMDREG(%a6)	# is operation monadic or dyadic?
-	beq.b		fu_extract_p		# monadic
-	cmpi.b		1+EXC_CMDREG(%a6),&0x3a	# is operation an ftst?
-	beq.b		fu_extract_p		# yes, so it's monadic, too
-
-	bsr.l		load_fpn2		# load dst into FP_DST
-
-	lea		FP_DST(%a6),%a0		# pass: ptr to dst op
-	bsr.l		set_tag_x		# tag the operand type
-	cmpi.b		%d0,&UNNORM		# is operand an UNNORM?
-	bne.b		fu_op2_done_p		# no
-	bsr.l		unnorm_fix		# yes; convert to NORM,DENORM,or ZERO
-fu_op2_done_p:
-	mov.b		%d0,DTAG(%a6)		# save dst optype tag
-
-fu_extract_p:
-	clr.l		%d0
-	mov.b		FPCR_MODE(%a6),%d0	# fetch rnd mode/prec
-
-	bfextu		1+EXC_CMDREG(%a6){&1:&7},%d1 # extract extension
-
-	lea		FP_SRC(%a6),%a0
-	lea		FP_DST(%a6),%a1
-
-	mov.l		(tbl_unsupp.l,%pc,%d1.l*4),%d1 # fetch routine addr
-	jsr		(tbl_unsupp.l,%pc,%d1.l*1)
-
-#
-# Exceptions in order of precedence:
-#	BSUN	: none
-#	SNAN	: all dyadic ops
-#	OPERR	: fsqrt(-NORM)
-#	OVFL	: all except ftst,fcmp
-#	UNFL	: all except ftst,fcmp
-#	DZ	: fdiv
-#	INEX2	: all except ftst,fcmp
-#	INEX1	: all
-#
-
-# we determine the highest priority exception(if any) set by the
-# emulation routine that has also been enabled by the user.
-	mov.b		FPCR_ENABLE(%a6),%d0	# fetch exceptions enabled
-	bne.w		fu_in_ena_p		# some are enabled
-
-fu_in_cont_p:
-# fcmp and ftst do not store any result.
-	mov.b		1+EXC_CMDREG(%a6),%d0	# fetch extension
-	andi.b		&0x38,%d0		# extract bits 3-5
-	cmpi.b		%d0,&0x38		# is instr fcmp or ftst?
-	beq.b		fu_in_exit_p		# yes
-
-	bfextu		EXC_CMDREG(%a6){&6:&3},%d0 # dyadic; load dst reg
-	bsr.l		store_fpreg		# store the result
-
-fu_in_exit_p:
-
-	btst		&0x5,EXC_SR(%a6)	# user or supervisor?
-	bne.w		fu_in_exit_s_p		# supervisor
-
-	mov.l		EXC_A7(%a6),%a0		# update user a7
-	mov.l		%a0,%usp
-
-fu_in_exit_cont_p:
-	fmovm.x		EXC_FPREGS(%a6),&0xc0	# restore fp0/fp1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-
-	unlk		%a6			# unravel stack frame
-
-	btst		&0x7,(%sp)		# is trace on?
-	bne.w		fu_trace_p		# yes
-
-	bra.l		_fpsp_done		# exit to os
-
-# the exception occurred in supervisor mode. check to see if the
-# addressing mode was (a7)+. if so, we'll need to shift the
-# stack frame "up".
-fu_in_exit_s_p:
-	btst		&mia7_bit,SPCOND_FLG(%a6) # was ea mode (a7)+
-	beq.b		fu_in_exit_cont_p	# no
-
-	fmovm.x		EXC_FPREGS(%a6),&0xc0	# restore fp0/fp1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-
-	unlk		%a6			# unravel stack frame
-
-# shift the stack frame "up". we don't really care about the <ea> field.
-	mov.l		0x4(%sp),0x10(%sp)
-	mov.l		0x0(%sp),0xc(%sp)
-	add.l		&0xc,%sp
-
-	btst		&0x7,(%sp)		# is trace on?
-	bne.w		fu_trace_p		# yes
-
-	bra.l		_fpsp_done		# exit to os
-
-fu_in_ena_p:
-	and.b		FPSR_EXCEPT(%a6),%d0	# keep only ones enabled & set
-	bfffo		%d0{&24:&8},%d0		# find highest priority exception
-	bne.b		fu_in_exc_p		# at least one was set
-
-#
-# No exceptions occurred that were also enabled. Now:
-#
-#	if (OVFL && ovfl_disabled && inexact_enabled) {
-#	    branch to _real_inex() (even if the result was exact!);
-#	} else {
-#	    save the result in the proper fp reg (unless the op is fcmp or ftst);
-#	    return;
-#	}
-#
-	btst		&ovfl_bit,FPSR_EXCEPT(%a6) # was overflow set?
-	beq.w		fu_in_cont_p		# no
-
-fu_in_ovflchk_p:
-	btst		&inex2_bit,FPCR_ENABLE(%a6) # was inexact enabled?
-	beq.w		fu_in_cont_p		# no
-	bra.w		fu_in_exc_ovfl_p	# do _real_inex() now
-
-#
-# An exception occurred and that exception was enabled:
-#
-#	shift enabled exception field into lo byte of d0;
-#	if (((INEX2 || INEX1) && inex_enabled && OVFL && ovfl_disabled) ||
-#	    ((INEX2 || INEX1) && inex_enabled && UNFL && unfl_disabled)) {
-#		/*
-#		 * this is the case where we must call _real_inex() now or else
-#		 * there will be no other way to pass it the exceptional operand
-#		 */
-#		call _real_inex();
-#	} else {
-#		restore exc state (SNAN||OPERR||OVFL||UNFL||DZ||INEX) into the FPU;
-#	}
-#
-fu_in_exc_p:
-	subi.l		&24,%d0			# fix offset to be 0-8
-	cmpi.b		%d0,&0x6		# is exception INEX? (6 or 7)
-	blt.b		fu_in_exc_exit_p	# no
-
-# the enabled exception was inexact
-	btst		&unfl_bit,FPSR_EXCEPT(%a6) # did disabled underflow occur?
-	bne.w		fu_in_exc_unfl_p	# yes
-	btst		&ovfl_bit,FPSR_EXCEPT(%a6) # did disabled overflow occur?
-	bne.w		fu_in_exc_ovfl_p	# yes
-
-# here, we insert the correct fsave status value into the fsave frame for the
-# corresponding exception. the operand in the fsave frame should be the original
-# src operand.
-# as a reminder for future predicted pain and agony, we are passing in fsave the
-# "non-skewed" operand for cases of sgl and dbl src INFs,NANs, and DENORMs.
-# this is INCORRECT for enabled SNAN which would give to the user the skewed SNAN!!!
-fu_in_exc_exit_p:
-	btst		&0x5,EXC_SR(%a6)	# user or supervisor?
-	bne.w		fu_in_exc_exit_s_p	# supervisor
-
-	mov.l		EXC_A7(%a6),%a0		# update user a7
-	mov.l		%a0,%usp
-
-fu_in_exc_exit_cont_p:
-	mov.w		(tbl_except_p.b,%pc,%d0.w*2),2+FP_SRC(%a6)
-
-	fmovm.x		EXC_FPREGS(%a6),&0xc0	# restore fp0/fp1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-
-	frestore	FP_SRC(%a6)		# restore src op
-
-	unlk		%a6
-
-	btst		&0x7,(%sp)		# is trace enabled?
-	bne.w		fu_trace_p		# yes
-
-	bra.l		_fpsp_done
-
-tbl_except_p:
-	short		0xe000,0xe006,0xe004,0xe005
-	short		0xe003,0xe002,0xe001,0xe001
-
-fu_in_exc_ovfl_p:
-	mov.w		&0x3,%d0
-	bra.w		fu_in_exc_exit_p
-
-fu_in_exc_unfl_p:
-	mov.w		&0x4,%d0
-	bra.w		fu_in_exc_exit_p
-
-fu_in_exc_exit_s_p:
-	btst		&mia7_bit,SPCOND_FLG(%a6)
-	beq.b		fu_in_exc_exit_cont_p
-
-	mov.w		(tbl_except_p.b,%pc,%d0.w*2),2+FP_SRC(%a6)
-
-	fmovm.x		EXC_FPREGS(%a6),&0xc0	# restore fp0/fp1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-
-	frestore	FP_SRC(%a6)		# restore src op
-
-	unlk		%a6			# unravel stack frame
-
-# shift stack frame "up". who cares about <ea> field.
-	mov.l		0x4(%sp),0x10(%sp)
-	mov.l		0x0(%sp),0xc(%sp)
-	add.l		&0xc,%sp
-
-	btst		&0x7,(%sp)		# is trace on?
-	bne.b		fu_trace_p		# yes
-
-	bra.l		_fpsp_done		# exit to os
-
-#
-# The opclass two PACKED instruction that took an "Unimplemented Data Type"
-# exception was being traced. Make the "current" PC the FPIAR and put it in the
-# trace stack frame then jump to _real_trace().
-#
-#		  UNSUPP FRAME		   TRACE FRAME
-#		*****************	*****************
-#		*      EA	*	*    Current	*
-#		*		*	*      PC	*
-#		*****************	*****************
-#		* 0x2 *	0x0dc	*	* 0x2 *  0x024	*
-#		*****************	*****************
-#		*     Next	*	*     Next	*
-#		*      PC	*	*      PC	*
-#		*****************	*****************
-#		*      SR	*	*      SR	*
-#		*****************	*****************
-fu_trace_p:
-	mov.w		&0x2024,0x6(%sp)
-	fmov.l		%fpiar,0x8(%sp)
-
-	bra.l		_real_trace
-
-#########################################################
-#########################################################
-fu_out_pack:
-
-
-# I'm not sure at this point what FPSR bits are valid for this instruction.
-# so, since the emulation routines re-create them anyways, zero exception field.
-# fmove out doesn't affect ccodes.
-	and.l		&0xffff00ff,USER_FPSR(%a6) # zero exception field
-
-	fmov.l		&0x0,%fpcr		# zero current control regs
-	fmov.l		&0x0,%fpsr
-
-	bfextu		EXC_CMDREG(%a6){&6:&3},%d0
-	bsr.l		load_fpn1
-
-# unlike other opclass 3, unimplemented data type exceptions, packed must be
-# able to detect all operand types.
-	lea		FP_SRC(%a6),%a0
-	bsr.l		set_tag_x		# tag the operand type
-	cmpi.b		%d0,&UNNORM		# is operand an UNNORM?
-	bne.b		fu_op2_p		# no
-	bsr.l		unnorm_fix		# yes; convert to NORM,DENORM,or ZERO
-
-fu_op2_p:
-	mov.b		%d0,STAG(%a6)		# save src optype tag
-
-	clr.l		%d0
-	mov.b		FPCR_MODE(%a6),%d0	# fetch rnd mode/prec
-
-	lea		FP_SRC(%a6),%a0		# pass ptr to src operand
-
-	mov.l		(%a6),EXC_A6(%a6)	# in case a6 changes
-	bsr.l		fout			# call fmove out routine
-
-# Exceptions in order of precedence:
-#	BSUN	: no
-#	SNAN	: yes
-#	OPERR	: if ((k_factor > +17) || (dec. exp exceeds 3 digits))
-#	OVFL	: no
-#	UNFL	: no
-#	DZ	: no
-#	INEX2	: yes
-#	INEX1	: no
-
-# determine the highest priority exception(if any) set by the
-# emulation routine that has also been enabled by the user.
-	mov.b		FPCR_ENABLE(%a6),%d0	# fetch exceptions enabled
-	bne.w		fu_out_ena_p		# some are enabled
-
-fu_out_exit_p:
-	mov.l		EXC_A6(%a6),(%a6)	# restore a6
-
-	btst		&0x5,EXC_SR(%a6)	# user or supervisor?
-	bne.b		fu_out_exit_s_p		# supervisor
-
-	mov.l		EXC_A7(%a6),%a0		# update user a7
-	mov.l		%a0,%usp
-
-fu_out_exit_cont_p:
-	fmovm.x		EXC_FPREGS(%a6),&0xc0	# restore fp0/fp1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-
-	unlk		%a6			# unravel stack frame
-
-	btst		&0x7,(%sp)		# is trace on?
-	bne.w		fu_trace_p		# yes
-
-	bra.l		_fpsp_done		# exit to os
-
-# the exception occurred in supervisor mode. check to see if the
-# addressing mode was -(a7). if so, we'll need to shift the
-# stack frame "down".
-fu_out_exit_s_p:
-	btst		&mda7_bit,SPCOND_FLG(%a6) # was ea mode -(a7)
-	beq.b		fu_out_exit_cont_p	# no
-
-	fmovm.x		EXC_FPREGS(%a6),&0xc0	# restore fp0/fp1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-
-	mov.l		(%a6),%a6		# restore frame pointer
-
-	mov.l		LOCAL_SIZE+EXC_SR(%sp),LOCAL_SIZE+EXC_SR-0xc(%sp)
-	mov.l		LOCAL_SIZE+2+EXC_PC(%sp),LOCAL_SIZE+2+EXC_PC-0xc(%sp)
-
-# now, copy the result to the proper place on the stack
-	mov.l		LOCAL_SIZE+FP_DST_EX(%sp),LOCAL_SIZE+EXC_SR+0x0(%sp)
-	mov.l		LOCAL_SIZE+FP_DST_HI(%sp),LOCAL_SIZE+EXC_SR+0x4(%sp)
-	mov.l		LOCAL_SIZE+FP_DST_LO(%sp),LOCAL_SIZE+EXC_SR+0x8(%sp)
-
-	add.l		&LOCAL_SIZE-0x8,%sp
-
-	btst		&0x7,(%sp)
-	bne.w		fu_trace_p
-
-	bra.l		_fpsp_done
-
-fu_out_ena_p:
-	and.b		FPSR_EXCEPT(%a6),%d0	# keep only ones enabled
-	bfffo		%d0{&24:&8},%d0		# find highest priority exception
-	beq.w		fu_out_exit_p
-
-	mov.l		EXC_A6(%a6),(%a6)	# restore a6
-
-# an exception occurred and that exception was enabled.
-# the only exception possible on packed move out are INEX, OPERR, and SNAN.
-fu_out_exc_p:
-	cmpi.b		%d0,&0x1a
-	bgt.w		fu_inex_p2
-	beq.w		fu_operr_p
-
-fu_snan_p:
-	btst		&0x5,EXC_SR(%a6)
-	bne.b		fu_snan_s_p
-
-	mov.l		EXC_A7(%a6),%a0
-	mov.l		%a0,%usp
-	bra.w		fu_snan
-
-fu_snan_s_p:
-	cmpi.b		SPCOND_FLG(%a6),&mda7_flg
-	bne.w		fu_snan
-
-# the instruction was "fmove.p fpn,-(a7)" from supervisor mode.
-# the strategy is to move the exception frame "down" 12 bytes. then, we
-# can store the default result where the exception frame was.
-	fmovm.x		EXC_FPREGS(%a6),&0xc0	# restore fp0/fp1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-
-	mov.w		&0x30d8,EXC_VOFF(%a6)	# vector offset = 0xd0
-	mov.w		&0xe006,2+FP_SRC(%a6)	# set fsave status
-
-	frestore	FP_SRC(%a6)		# restore src operand
-
-	mov.l		(%a6),%a6		# restore frame pointer
-
-	mov.l		LOCAL_SIZE+EXC_SR(%sp),LOCAL_SIZE+EXC_SR-0xc(%sp)
-	mov.l		LOCAL_SIZE+2+EXC_PC(%sp),LOCAL_SIZE+2+EXC_PC-0xc(%sp)
-	mov.l		LOCAL_SIZE+EXC_EA(%sp),LOCAL_SIZE+EXC_EA-0xc(%sp)
-
-# now, we copy the default result to its proper location
-	mov.l		LOCAL_SIZE+FP_DST_EX(%sp),LOCAL_SIZE+0x4(%sp)
-	mov.l		LOCAL_SIZE+FP_DST_HI(%sp),LOCAL_SIZE+0x8(%sp)
-	mov.l		LOCAL_SIZE+FP_DST_LO(%sp),LOCAL_SIZE+0xc(%sp)
-
-	add.l		&LOCAL_SIZE-0x8,%sp
-
-
-	bra.l		_real_snan
-
-fu_operr_p:
-	btst		&0x5,EXC_SR(%a6)
-	bne.w		fu_operr_p_s
-
-	mov.l		EXC_A7(%a6),%a0
-	mov.l		%a0,%usp
-	bra.w		fu_operr
-
-fu_operr_p_s:
-	cmpi.b		SPCOND_FLG(%a6),&mda7_flg
-	bne.w		fu_operr
-
-# the instruction was "fmove.p fpn,-(a7)" from supervisor mode.
-# the strategy is to move the exception frame "down" 12 bytes. then, we
-# can store the default result where the exception frame was.
-	fmovm.x		EXC_FPREGS(%a6),&0xc0	# restore fp0/fp1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-
-	mov.w		&0x30d0,EXC_VOFF(%a6)	# vector offset = 0xd0
-	mov.w		&0xe004,2+FP_SRC(%a6)	# set fsave status
-
-	frestore	FP_SRC(%a6)		# restore src operand
-
-	mov.l		(%a6),%a6		# restore frame pointer
-
-	mov.l		LOCAL_SIZE+EXC_SR(%sp),LOCAL_SIZE+EXC_SR-0xc(%sp)
-	mov.l		LOCAL_SIZE+2+EXC_PC(%sp),LOCAL_SIZE+2+EXC_PC-0xc(%sp)
-	mov.l		LOCAL_SIZE+EXC_EA(%sp),LOCAL_SIZE+EXC_EA-0xc(%sp)
-
-# now, we copy the default result to its proper location
-	mov.l		LOCAL_SIZE+FP_DST_EX(%sp),LOCAL_SIZE+0x4(%sp)
-	mov.l		LOCAL_SIZE+FP_DST_HI(%sp),LOCAL_SIZE+0x8(%sp)
-	mov.l		LOCAL_SIZE+FP_DST_LO(%sp),LOCAL_SIZE+0xc(%sp)
-
-	add.l		&LOCAL_SIZE-0x8,%sp
-
-
-	bra.l		_real_operr
-
-fu_inex_p2:
-	btst		&0x5,EXC_SR(%a6)
-	bne.w		fu_inex_s_p2
-
-	mov.l		EXC_A7(%a6),%a0
-	mov.l		%a0,%usp
-	bra.w		fu_inex
-
-fu_inex_s_p2:
-	cmpi.b		SPCOND_FLG(%a6),&mda7_flg
-	bne.w		fu_inex
-
-# the instruction was "fmove.p fpn,-(a7)" from supervisor mode.
-# the strategy is to move the exception frame "down" 12 bytes. then, we
-# can store the default result where the exception frame was.
-	fmovm.x		EXC_FPREGS(%a6),&0xc0	# restore fp0/fp1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-
-	mov.w		&0x30c4,EXC_VOFF(%a6)	# vector offset = 0xc4
-	mov.w		&0xe001,2+FP_SRC(%a6)	# set fsave status
-
-	frestore	FP_SRC(%a6)		# restore src operand
-
-	mov.l		(%a6),%a6		# restore frame pointer
-
-	mov.l		LOCAL_SIZE+EXC_SR(%sp),LOCAL_SIZE+EXC_SR-0xc(%sp)
-	mov.l		LOCAL_SIZE+2+EXC_PC(%sp),LOCAL_SIZE+2+EXC_PC-0xc(%sp)
-	mov.l		LOCAL_SIZE+EXC_EA(%sp),LOCAL_SIZE+EXC_EA-0xc(%sp)
-
-# now, we copy the default result to its proper location
-	mov.l		LOCAL_SIZE+FP_DST_EX(%sp),LOCAL_SIZE+0x4(%sp)
-	mov.l		LOCAL_SIZE+FP_DST_HI(%sp),LOCAL_SIZE+0x8(%sp)
-	mov.l		LOCAL_SIZE+FP_DST_LO(%sp),LOCAL_SIZE+0xc(%sp)
-
-	add.l		&LOCAL_SIZE-0x8,%sp
-
-
-	bra.l		_real_inex
-
-#########################################################################
-
-#
-# if we're stuffing a source operand back into an fsave frame then we
-# have to make sure that for single or double source operands that the
-# format stuffed is as weird as the hardware usually makes it.
-#
-	global		funimp_skew
-funimp_skew:
-	bfextu		EXC_EXTWORD(%a6){&3:&3},%d0 # extract src specifier
-	cmpi.b		%d0,&0x1		# was src sgl?
-	beq.b		funimp_skew_sgl		# yes
-	cmpi.b		%d0,&0x5		# was src dbl?
-	beq.b		funimp_skew_dbl		# yes
-	rts
-
-funimp_skew_sgl:
-	mov.w		FP_SRC_EX(%a6),%d0	# fetch DENORM exponent
-	andi.w		&0x7fff,%d0		# strip sign
-	beq.b		funimp_skew_sgl_not
-	cmpi.w		%d0,&0x3f80
-	bgt.b		funimp_skew_sgl_not
-	neg.w		%d0			# make exponent negative
-	addi.w		&0x3f81,%d0		# find amt to shift
-	mov.l		FP_SRC_HI(%a6),%d1	# fetch DENORM hi(man)
-	lsr.l		%d0,%d1			# shift it
-	bset		&31,%d1			# set j-bit
-	mov.l		%d1,FP_SRC_HI(%a6)	# insert new hi(man)
-	andi.w		&0x8000,FP_SRC_EX(%a6)	# clear old exponent
-	ori.w		&0x3f80,FP_SRC_EX(%a6)	# insert new "skewed" exponent
-funimp_skew_sgl_not:
-	rts
-
-funimp_skew_dbl:
-	mov.w		FP_SRC_EX(%a6),%d0	# fetch DENORM exponent
-	andi.w		&0x7fff,%d0		# strip sign
-	beq.b		funimp_skew_dbl_not
-	cmpi.w		%d0,&0x3c00
-	bgt.b		funimp_skew_dbl_not
-
-	tst.b		FP_SRC_EX(%a6)		# make "internal format"
-	smi.b		0x2+FP_SRC(%a6)
-	mov.w		%d0,FP_SRC_EX(%a6)	# insert exponent with cleared sign
-	clr.l		%d0			# clear g,r,s
-	lea		FP_SRC(%a6),%a0		# pass ptr to src op
-	mov.w		&0x3c01,%d1		# pass denorm threshold
-	bsr.l		dnrm_lp			# denorm it
-	mov.w		&0x3c00,%d0		# new exponent
-	tst.b		0x2+FP_SRC(%a6)		# is sign set?
-	beq.b		fss_dbl_denorm_done	# no
-	bset		&15,%d0			# set sign
-fss_dbl_denorm_done:
-	bset		&0x7,FP_SRC_HI(%a6)	# set j-bit
-	mov.w		%d0,FP_SRC_EX(%a6)	# insert new exponent
-funimp_skew_dbl_not:
-	rts
-
-#########################################################################
-	global		_mem_write2
-_mem_write2:
-	btst		&0x5,EXC_SR(%a6)
-	beq.l		_dmem_write
-	mov.l		0x0(%a0),FP_DST_EX(%a6)
-	mov.l		0x4(%a0),FP_DST_HI(%a6)
-	mov.l		0x8(%a0),FP_DST_LO(%a6)
-	clr.l		%d1
-	rts
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	_fpsp_effadd(): 060FPSP entry point for FP "Unimplemented	#
-#			effective address" exception.			#
-#									#
-#	This handler should be the first code executed upon taking the	#
-#	FP Unimplemented Effective Address exception in an operating	#
-#	system.								#
-#									#
-# XREF ****************************************************************	#
-#	_imem_read_long() - read instruction longword			#
-#	fix_skewed_ops() - adjust src operand in fsave frame		#
-#	set_tag_x() - determine optype of src/dst operands		#
-#	store_fpreg() - store opclass 0 or 2 result to FP regfile	#
-#	unnorm_fix() - change UNNORM operands to NORM or ZERO		#
-#	load_fpn2() - load dst operand from FP regfile			#
-#	tbl_unsupp - add of table of emulation routines for opclass 0,2	#
-#	decbin() - convert packed data to FP binary data		#
-#	_real_fpu_disabled() - "callout" for "FPU disabled" exception	#
-#	_real_access() - "callout" for access error exception		#
-#	_mem_read() - read extended immediate operand from memory	#
-#	_fpsp_done() - "callout" for exit; work all done		#
-#	_real_trace() - "callout" for Trace enabled exception		#
-#	fmovm_dynamic() - emulate dynamic fmovm instruction		#
-#	fmovm_ctrl() - emulate fmovm control instruction		#
-#									#
-# INPUT ***************************************************************	#
-#	- The system stack contains the "Unimplemented <ea>" stk frame	#
-#									#
-# OUTPUT **************************************************************	#
-#	If access error:						#
-#	- The system stack is changed to an access error stack frame	#
-#	If FPU disabled:						#
-#	- The system stack is changed to an FPU disabled stack frame	#
-#	If Trace exception enabled:					#
-#	- The system stack is changed to a Trace exception stack frame	#
-#	Else: (normal case)						#
-#	- None (correct result has been stored as appropriate)		#
-#									#
-# ALGORITHM ***********************************************************	#
-#	This exception handles 3 types of operations:			#
-# (1) FP Instructions using extended precision or packed immediate	#
-#     addressing mode.							#
-# (2) The "fmovm.x" instruction w/ dynamic register specification.	#
-# (3) The "fmovm.l" instruction w/ 2 or 3 control registers.		#
-#									#
-#	For immediate data operations, the data is read in w/ a		#
-# _mem_read() "callout", converted to FP binary (if packed), and used	#
-# as the source operand to the instruction specified by the instruction	#
-# word. If no FP exception should be reported ads a result of the	#
-# emulation, then the result is stored to the destination register and	#
-# the handler exits through _fpsp_done(). If an enabled exc has been	#
-# signalled as a result of emulation, then an fsave state frame		#
-# corresponding to the FP exception type must be entered into the 060	#
-# FPU before exiting. In either the enabled or disabled cases, we	#
-# must also check if a Trace exception is pending, in which case, we	#
-# must create a Trace exception stack frame from the current exception	#
-# stack frame. If no Trace is pending, we simply exit through		#
-# _fpsp_done().								#
-#	For "fmovm.x", call the routine fmovm_dynamic() which will	#
-# decode and emulate the instruction. No FP exceptions can be pending	#
-# as a result of this operation emulation. A Trace exception can be	#
-# pending, though, which means the current stack frame must be changed	#
-# to a Trace stack frame and an exit made through _real_trace().	#
-# For the case of "fmovm.x Dn,-(a7)", where the offending instruction	#
-# was executed from supervisor mode, this handler must store the FP	#
-# register file values to the system stack by itself since		#
-# fmovm_dynamic() can't handle this. A normal exit is made through	#
-# fpsp_done().								#
-#	For "fmovm.l", fmovm_ctrl() is used to emulate the instruction.	#
-# Again, a Trace exception may be pending and an exit made through	#
-# _real_trace(). Else, a normal exit is made through _fpsp_done().	#
-#									#
-#	Before any of the above is attempted, it must be checked to	#
-# see if the FPU is disabled. Since the "Unimp <ea>" exception is taken	#
-# before the "FPU disabled" exception, but the "FPU disabled" exception	#
-# has higher priority, we check the disabled bit in the PCR. If set,	#
-# then we must create an 8 word "FPU disabled" exception stack frame	#
-# from the current 4 word exception stack frame. This includes		#
-# reproducing the effective address of the instruction to put on the	#
-# new stack frame.							#
-#									#
-#	In the process of all emulation work, if a _mem_read()		#
-# "callout" returns a failing result indicating an access error, then	#
-# we must create an access error stack frame from the current stack	#
-# frame. This information includes a faulting address and a fault-	#
-# status-longword. These are created within this handler.		#
-#									#
-#########################################################################
-
-	global		_fpsp_effadd
-_fpsp_effadd:
-
-# This exception type takes priority over the "Line F Emulator"
-# exception. Therefore, the FPU could be disabled when entering here.
-# So, we must check to see if it's disabled and handle that case separately.
-	mov.l		%d0,-(%sp)		# save d0
-	movc		%pcr,%d0		# load proc cr
-	btst		&0x1,%d0		# is FPU disabled?
-	bne.w		iea_disabled		# yes
-	mov.l		(%sp)+,%d0		# restore d0
-
-	link		%a6,&-LOCAL_SIZE	# init stack frame
-
-	movm.l		&0x0303,EXC_DREGS(%a6)	# save d0-d1/a0-a1
-	fmovm.l		%fpcr,%fpsr,%fpiar,USER_FPCR(%a6) # save ctrl regs
-	fmovm.x		&0xc0,EXC_FPREGS(%a6)	# save fp0-fp1 on stack
-
-# PC of instruction that took the exception is the PC in the frame
-	mov.l		EXC_PC(%a6),EXC_EXTWPTR(%a6)
-
-	mov.l		EXC_EXTWPTR(%a6),%a0	# fetch instruction addr
-	addq.l		&0x4,EXC_EXTWPTR(%a6)	# incr instruction ptr
-	bsr.l		_imem_read_long		# fetch the instruction words
-	mov.l		%d0,EXC_OPWORD(%a6)	# store OPWORD and EXTWORD
-
-#########################################################################
-
-	tst.w		%d0			# is operation fmovem?
-	bmi.w		iea_fmovm		# yes
-
-#
-# here, we will have:
-#	fabs	fdabs	fsabs		facos		fmod
-#	fadd	fdadd	fsadd		fasin		frem
-#	fcmp				fatan		fscale
-#	fdiv	fddiv	fsdiv		fatanh		fsin
-#	fint				fcos		fsincos
-#	fintrz				fcosh		fsinh
-#	fmove	fdmove	fsmove		fetox		ftan
-#	fmul	fdmul	fsmul		fetoxm1		ftanh
-#	fneg	fdneg	fsneg		fgetexp		ftentox
-#	fsgldiv				fgetman		ftwotox
-#	fsglmul				flog10
-#	fsqrt				flog2
-#	fsub	fdsub	fssub		flogn
-#	ftst				flognp1
-# which can all use f<op>.{x,p}
-# so, now it's immediate data extended precision AND PACKED FORMAT!
-#
-iea_op:
-	andi.l		&0x00ff00ff,USER_FPSR(%a6)
-
-	btst		&0xa,%d0		# is src fmt x or p?
-	bne.b		iea_op_pack		# packed
-
-
-	mov.l		EXC_EXTWPTR(%a6),%a0	# pass: ptr to #<data>
-	lea		FP_SRC(%a6),%a1		# pass: ptr to super addr
-	mov.l		&0xc,%d0		# pass: 12 bytes
-	bsr.l		_imem_read		# read extended immediate
-
-	tst.l		%d1			# did ifetch fail?
-	bne.w		iea_iacc		# yes
-
-	bra.b		iea_op_setsrc
-
-iea_op_pack:
-
-	mov.l		EXC_EXTWPTR(%a6),%a0	# pass: ptr to #<data>
-	lea		FP_SRC(%a6),%a1		# pass: ptr to super dst
-	mov.l		&0xc,%d0		# pass: 12 bytes
-	bsr.l		_imem_read		# read packed operand
-
-	tst.l		%d1			# did ifetch fail?
-	bne.w		iea_iacc		# yes
-
-# The packed operand is an INF or a NAN if the exponent field is all ones.
-	bfextu		FP_SRC(%a6){&1:&15},%d0	# get exp
-	cmpi.w		%d0,&0x7fff		# INF or NAN?
-	beq.b		iea_op_setsrc		# operand is an INF or NAN
-
-# The packed operand is a zero if the mantissa is all zero, else it's
-# a normal packed op.
-	mov.b		3+FP_SRC(%a6),%d0	# get byte 4
-	andi.b		&0x0f,%d0		# clear all but last nybble
-	bne.b		iea_op_gp_not_spec	# not a zero
-	tst.l		FP_SRC_HI(%a6)		# is lw 2 zero?
-	bne.b		iea_op_gp_not_spec	# not a zero
-	tst.l		FP_SRC_LO(%a6)		# is lw 3 zero?
-	beq.b		iea_op_setsrc		# operand is a ZERO
-iea_op_gp_not_spec:
-	lea		FP_SRC(%a6),%a0		# pass: ptr to packed op
-	bsr.l		decbin			# convert to extended
-	fmovm.x		&0x80,FP_SRC(%a6)	# make this the srcop
-
-iea_op_setsrc:
-	addi.l		&0xc,EXC_EXTWPTR(%a6)	# update extension word pointer
-
-# FP_SRC now holds the src operand.
-	lea		FP_SRC(%a6),%a0		# pass: ptr to src op
-	bsr.l		set_tag_x		# tag the operand type
-	mov.b		%d0,STAG(%a6)		# could be ANYTHING!!!
-	cmpi.b		%d0,&UNNORM		# is operand an UNNORM?
-	bne.b		iea_op_getdst		# no
-	bsr.l		unnorm_fix		# yes; convert to NORM/DENORM/ZERO
-	mov.b		%d0,STAG(%a6)		# set new optype tag
-iea_op_getdst:
-	clr.b		STORE_FLG(%a6)		# clear "store result" boolean
-
-	btst		&0x5,1+EXC_CMDREG(%a6)	# is operation monadic or dyadic?
-	beq.b		iea_op_extract		# monadic
-	btst		&0x4,1+EXC_CMDREG(%a6)	# is operation fsincos,ftst,fcmp?
-	bne.b		iea_op_spec		# yes
-
-iea_op_loaddst:
-	bfextu		EXC_CMDREG(%a6){&6:&3},%d0 # fetch dst regno
-	bsr.l		load_fpn2		# load dst operand
-
-	lea		FP_DST(%a6),%a0		# pass: ptr to dst op
-	bsr.l		set_tag_x		# tag the operand type
-	mov.b		%d0,DTAG(%a6)		# could be ANYTHING!!!
-	cmpi.b		%d0,&UNNORM		# is operand an UNNORM?
-	bne.b		iea_op_extract		# no
-	bsr.l		unnorm_fix		# yes; convert to NORM/DENORM/ZERO
-	mov.b		%d0,DTAG(%a6)		# set new optype tag
-	bra.b		iea_op_extract
-
-# the operation is fsincos, ftst, or fcmp. only fcmp is dyadic
-iea_op_spec:
-	btst		&0x3,1+EXC_CMDREG(%a6)	# is operation fsincos?
-	beq.b		iea_op_extract		# yes
-# now, we're left with ftst and fcmp. so, first let's tag them so that they don't
-# store a result. then, only fcmp will branch back and pick up a dst operand.
-	st		STORE_FLG(%a6)		# don't store a final result
-	btst		&0x1,1+EXC_CMDREG(%a6)	# is operation fcmp?
-	beq.b		iea_op_loaddst		# yes
-
-iea_op_extract:
-	clr.l		%d0
-	mov.b		FPCR_MODE(%a6),%d0	# pass: rnd mode,prec
-
-	mov.b		1+EXC_CMDREG(%a6),%d1
-	andi.w		&0x007f,%d1		# extract extension
-
-	fmov.l		&0x0,%fpcr
-	fmov.l		&0x0,%fpsr
-
-	lea		FP_SRC(%a6),%a0
-	lea		FP_DST(%a6),%a1
-
-	mov.l		(tbl_unsupp.l,%pc,%d1.w*4),%d1 # fetch routine addr
-	jsr		(tbl_unsupp.l,%pc,%d1.l*1)
-
-#
-# Exceptions in order of precedence:
-#	BSUN	: none
-#	SNAN	: all operations
-#	OPERR	: all reg-reg or mem-reg operations that can normally operr
-#	OVFL	: same as OPERR
-#	UNFL	: same as OPERR
-#	DZ	: same as OPERR
-#	INEX2	: same as OPERR
-#	INEX1	: all packed immediate operations
-#
-
-# we determine the highest priority exception(if any) set by the
-# emulation routine that has also been enabled by the user.
-	mov.b		FPCR_ENABLE(%a6),%d0	# fetch exceptions enabled
-	bne.b		iea_op_ena		# some are enabled
-
-# now, we save the result, unless, of course, the operation was ftst or fcmp.
-# these don't save results.
-iea_op_save:
-	tst.b		STORE_FLG(%a6)		# does this op store a result?
-	bne.b		iea_op_exit1		# exit with no frestore
-
-iea_op_store:
-	bfextu		EXC_CMDREG(%a6){&6:&3},%d0 # fetch dst regno
-	bsr.l		store_fpreg		# store the result
-
-iea_op_exit1:
-	mov.l		EXC_PC(%a6),USER_FPIAR(%a6) # set FPIAR to "Current PC"
-	mov.l		EXC_EXTWPTR(%a6),EXC_PC(%a6) # set "Next PC" in exc frame
-
-	fmovm.x		EXC_FPREGS(%a6),&0xc0	# restore fp0-fp1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-
-	unlk		%a6			# unravel the frame
-
-	btst		&0x7,(%sp)		# is trace on?
-	bne.w		iea_op_trace		# yes
-
-	bra.l		_fpsp_done		# exit to os
-
-iea_op_ena:
-	and.b		FPSR_EXCEPT(%a6),%d0	# keep only ones enable and set
-	bfffo		%d0{&24:&8},%d0		# find highest priority exception
-	bne.b		iea_op_exc		# at least one was set
-
-# no exception occurred. now, did a disabled, exact overflow occur with inexact
-# enabled? if so, then we have to stuff an overflow frame into the FPU.
-	btst		&ovfl_bit,FPSR_EXCEPT(%a6) # did overflow occur?
-	beq.b		iea_op_save
-
-iea_op_ovfl:
-	btst		&inex2_bit,FPCR_ENABLE(%a6) # is inexact enabled?
-	beq.b		iea_op_store		# no
-	bra.b		iea_op_exc_ovfl		# yes
-
-# an enabled exception occurred. we have to insert the exception type back into
-# the machine.
-iea_op_exc:
-	subi.l		&24,%d0			# fix offset to be 0-8
-	cmpi.b		%d0,&0x6		# is exception INEX?
-	bne.b		iea_op_exc_force	# no
-
-# the enabled exception was inexact. so, if it occurs with an overflow
-# or underflow that was disabled, then we have to force an overflow or
-# underflow frame.
-	btst		&ovfl_bit,FPSR_EXCEPT(%a6) # did overflow occur?
-	bne.b		iea_op_exc_ovfl		# yes
-	btst		&unfl_bit,FPSR_EXCEPT(%a6) # did underflow occur?
-	bne.b		iea_op_exc_unfl		# yes
-
-iea_op_exc_force:
-	mov.w		(tbl_iea_except.b,%pc,%d0.w*2),2+FP_SRC(%a6)
-	bra.b		iea_op_exit2		# exit with frestore
-
-tbl_iea_except:
-	short		0xe002, 0xe006, 0xe004, 0xe005
-	short		0xe003, 0xe002, 0xe001, 0xe001
-
-iea_op_exc_ovfl:
-	mov.w		&0xe005,2+FP_SRC(%a6)
-	bra.b		iea_op_exit2
-
-iea_op_exc_unfl:
-	mov.w		&0xe003,2+FP_SRC(%a6)
-
-iea_op_exit2:
-	mov.l		EXC_PC(%a6),USER_FPIAR(%a6) # set FPIAR to "Current PC"
-	mov.l		EXC_EXTWPTR(%a6),EXC_PC(%a6) # set "Next PC" in exc frame
-
-	fmovm.x		EXC_FPREGS(%a6),&0xc0	# restore fp0-fp1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-
-	frestore	FP_SRC(%a6)		# restore exceptional state
-
-	unlk		%a6			# unravel the frame
-
-	btst		&0x7,(%sp)		# is trace on?
-	bne.b		iea_op_trace		# yes
-
-	bra.l		_fpsp_done		# exit to os
-
-#
-# The opclass two instruction that took an "Unimplemented Effective Address"
-# exception was being traced. Make the "current" PC the FPIAR and put it in
-# the trace stack frame then jump to _real_trace().
-#
-#		 UNIMP EA FRAME		   TRACE FRAME
-#		*****************	*****************
-#		* 0x0 *  0x0f0	*	*    Current	*
-#		*****************	*      PC	*
-#		*    Current	*	*****************
-#		*      PC	*	* 0x2 *  0x024	*
-#		*****************	*****************
-#		*      SR	*	*     Next	*
-#		*****************	*      PC	*
-#					*****************
-#					*      SR	*
-#					*****************
-iea_op_trace:
-	mov.l		(%sp),-(%sp)		# shift stack frame "down"
-	mov.w		0x8(%sp),0x4(%sp)
-	mov.w		&0x2024,0x6(%sp)	# stk fmt = 0x2; voff = 0x024
-	fmov.l		%fpiar,0x8(%sp)		# "Current PC" is in FPIAR
-
-	bra.l		_real_trace
-
-#########################################################################
-iea_fmovm:
-	btst		&14,%d0			# ctrl or data reg
-	beq.w		iea_fmovm_ctrl
-
-iea_fmovm_data:
-
-	btst		&0x5,EXC_SR(%a6)	# user or supervisor mode
-	bne.b		iea_fmovm_data_s
-
-iea_fmovm_data_u:
-	mov.l		%usp,%a0
-	mov.l		%a0,EXC_A7(%a6)		# store current a7
-	bsr.l		fmovm_dynamic		# do dynamic fmovm
-	mov.l		EXC_A7(%a6),%a0		# load possibly new a7
-	mov.l		%a0,%usp		# update usp
-	bra.w		iea_fmovm_exit
-
-iea_fmovm_data_s:
-	clr.b		SPCOND_FLG(%a6)
-	lea		0x2+EXC_VOFF(%a6),%a0
-	mov.l		%a0,EXC_A7(%a6)
-	bsr.l		fmovm_dynamic		# do dynamic fmovm
-
-	cmpi.b		SPCOND_FLG(%a6),&mda7_flg
-	beq.w		iea_fmovm_data_predec
-	cmpi.b		SPCOND_FLG(%a6),&mia7_flg
-	bne.w		iea_fmovm_exit
-
-# right now, d0 = the size.
-# the data has been fetched from the supervisor stack, but we have not
-# incremented the stack pointer by the appropriate number of bytes.
-# do it here.
-iea_fmovm_data_postinc:
-	btst		&0x7,EXC_SR(%a6)
-	bne.b		iea_fmovm_data_pi_trace
-
-	mov.w		EXC_SR(%a6),(EXC_SR,%a6,%d0)
-	mov.l		EXC_EXTWPTR(%a6),(EXC_PC,%a6,%d0)
-	mov.w		&0x00f0,(EXC_VOFF,%a6,%d0)
-
-	lea		(EXC_SR,%a6,%d0),%a0
-	mov.l		%a0,EXC_SR(%a6)
-
-	fmovm.x		EXC_FP0(%a6),&0xc0	# restore fp0-fp1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-
-	unlk		%a6
-	mov.l		(%sp)+,%sp
-	bra.l		_fpsp_done
-
-iea_fmovm_data_pi_trace:
-	mov.w		EXC_SR(%a6),(EXC_SR-0x4,%a6,%d0)
-	mov.l		EXC_EXTWPTR(%a6),(EXC_PC-0x4,%a6,%d0)
-	mov.w		&0x2024,(EXC_VOFF-0x4,%a6,%d0)
-	mov.l		EXC_PC(%a6),(EXC_VOFF+0x2-0x4,%a6,%d0)
-
-	lea		(EXC_SR-0x4,%a6,%d0),%a0
-	mov.l		%a0,EXC_SR(%a6)
-
-	fmovm.x		EXC_FP0(%a6),&0xc0	# restore fp0-fp1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-
-	unlk		%a6
-	mov.l		(%sp)+,%sp
-	bra.l		_real_trace
-
-# right now, d1 = size and d0 = the strg.
-iea_fmovm_data_predec:
-	mov.b		%d1,EXC_VOFF(%a6)	# store strg
-	mov.b		%d0,0x1+EXC_VOFF(%a6)	# store size
-
-	fmovm.x		EXC_FP0(%a6),&0xc0	# restore fp0-fp1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-
-	mov.l		(%a6),-(%sp)		# make a copy of a6
-	mov.l		%d0,-(%sp)		# save d0
-	mov.l		%d1,-(%sp)		# save d1
-	mov.l		EXC_EXTWPTR(%a6),-(%sp)	# make a copy of Next PC
-
-	clr.l		%d0
-	mov.b		0x1+EXC_VOFF(%a6),%d0	# fetch size
-	neg.l		%d0			# get negative of size
-
-	btst		&0x7,EXC_SR(%a6)	# is trace enabled?
-	beq.b		iea_fmovm_data_p2
-
-	mov.w		EXC_SR(%a6),(EXC_SR-0x4,%a6,%d0)
-	mov.l		EXC_PC(%a6),(EXC_VOFF-0x2,%a6,%d0)
-	mov.l		(%sp)+,(EXC_PC-0x4,%a6,%d0)
-	mov.w		&0x2024,(EXC_VOFF-0x4,%a6,%d0)
-
-	pea		(%a6,%d0)		# create final sp
-	bra.b		iea_fmovm_data_p3
-
-iea_fmovm_data_p2:
-	mov.w		EXC_SR(%a6),(EXC_SR,%a6,%d0)
-	mov.l		(%sp)+,(EXC_PC,%a6,%d0)
-	mov.w		&0x00f0,(EXC_VOFF,%a6,%d0)
-
-	pea		(0x4,%a6,%d0)		# create final sp
-
-iea_fmovm_data_p3:
-	clr.l		%d1
-	mov.b		EXC_VOFF(%a6),%d1	# fetch strg
-
-	tst.b		%d1
-	bpl.b		fm_1
-	fmovm.x		&0x80,(0x4+0x8,%a6,%d0)
-	addi.l		&0xc,%d0
-fm_1:
-	lsl.b		&0x1,%d1
-	bpl.b		fm_2
-	fmovm.x		&0x40,(0x4+0x8,%a6,%d0)
-	addi.l		&0xc,%d0
-fm_2:
-	lsl.b		&0x1,%d1
-	bpl.b		fm_3
-	fmovm.x		&0x20,(0x4+0x8,%a6,%d0)
-	addi.l		&0xc,%d0
-fm_3:
-	lsl.b		&0x1,%d1
-	bpl.b		fm_4
-	fmovm.x		&0x10,(0x4+0x8,%a6,%d0)
-	addi.l		&0xc,%d0
-fm_4:
-	lsl.b		&0x1,%d1
-	bpl.b		fm_5
-	fmovm.x		&0x08,(0x4+0x8,%a6,%d0)
-	addi.l		&0xc,%d0
-fm_5:
-	lsl.b		&0x1,%d1
-	bpl.b		fm_6
-	fmovm.x		&0x04,(0x4+0x8,%a6,%d0)
-	addi.l		&0xc,%d0
-fm_6:
-	lsl.b		&0x1,%d1
-	bpl.b		fm_7
-	fmovm.x		&0x02,(0x4+0x8,%a6,%d0)
-	addi.l		&0xc,%d0
-fm_7:
-	lsl.b		&0x1,%d1
-	bpl.b		fm_end
-	fmovm.x		&0x01,(0x4+0x8,%a6,%d0)
-fm_end:
-	mov.l		0x4(%sp),%d1
-	mov.l		0x8(%sp),%d0
-	mov.l		0xc(%sp),%a6
-	mov.l		(%sp)+,%sp
-
-	btst		&0x7,(%sp)		# is trace enabled?
-	beq.l		_fpsp_done
-	bra.l		_real_trace
-
-#########################################################################
-iea_fmovm_ctrl:
-
-	bsr.l		fmovm_ctrl		# load ctrl regs
-
-iea_fmovm_exit:
-	fmovm.x		EXC_FPREGS(%a6),&0xc0	# restore fp0-fp1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-
-	btst		&0x7,EXC_SR(%a6)	# is trace on?
-	bne.b		iea_fmovm_trace		# yes
-
-	mov.l		EXC_EXTWPTR(%a6),EXC_PC(%a6) # set Next PC
-
-	unlk		%a6			# unravel the frame
-
-	bra.l		_fpsp_done		# exit to os
-
-#
-# The control reg instruction that took an "Unimplemented Effective Address"
-# exception was being traced. The "Current PC" for the trace frame is the
-# PC stacked for Unimp EA. The "Next PC" is in EXC_EXTWPTR.
-# After fixing the stack frame, jump to _real_trace().
-#
-#		 UNIMP EA FRAME		   TRACE FRAME
-#		*****************	*****************
-#		* 0x0 *  0x0f0	*	*    Current	*
-#		*****************	*      PC	*
-#		*    Current	*	*****************
-#		*      PC	*	* 0x2 *  0x024	*
-#		*****************	*****************
-#		*      SR	*	*     Next	*
-#		*****************	*      PC	*
-#					*****************
-#					*      SR	*
-#					*****************
-# this ain't a pretty solution, but it works:
-# -restore a6 (not with unlk)
-# -shift stack frame down over where old a6 used to be
-# -add LOCAL_SIZE to stack pointer
-iea_fmovm_trace:
-	mov.l		(%a6),%a6		# restore frame pointer
-	mov.w		EXC_SR+LOCAL_SIZE(%sp),0x0+LOCAL_SIZE(%sp)
-	mov.l		EXC_PC+LOCAL_SIZE(%sp),0x8+LOCAL_SIZE(%sp)
-	mov.l		EXC_EXTWPTR+LOCAL_SIZE(%sp),0x2+LOCAL_SIZE(%sp)
-	mov.w		&0x2024,0x6+LOCAL_SIZE(%sp) # stk fmt = 0x2; voff = 0x024
-	add.l		&LOCAL_SIZE,%sp		# clear stack frame
-
-	bra.l		_real_trace
-
-#########################################################################
-# The FPU is disabled and so we should really have taken the "Line
-# F Emulator" exception. So, here we create an 8-word stack frame
-# from our 4-word stack frame. This means we must calculate the length
-# the faulting instruction to get the "next PC". This is trivial for
-# immediate operands but requires some extra work for fmovm dynamic
-# which can use most addressing modes.
-iea_disabled:
-	mov.l		(%sp)+,%d0		# restore d0
-
-	link		%a6,&-LOCAL_SIZE	# init stack frame
-
-	movm.l		&0x0303,EXC_DREGS(%a6)	# save d0-d1/a0-a1
-
-# PC of instruction that took the exception is the PC in the frame
-	mov.l		EXC_PC(%a6),EXC_EXTWPTR(%a6)
-	mov.l		EXC_EXTWPTR(%a6),%a0	# fetch instruction addr
-	addq.l		&0x4,EXC_EXTWPTR(%a6)	# incr instruction ptr
-	bsr.l		_imem_read_long		# fetch the instruction words
-	mov.l		%d0,EXC_OPWORD(%a6)	# store OPWORD and EXTWORD
-
-	tst.w		%d0			# is instr fmovm?
-	bmi.b		iea_dis_fmovm		# yes
-# instruction is using an extended precision immediate operand. Therefore,
-# the total instruction length is 16 bytes.
-iea_dis_immed:
-	mov.l		&0x10,%d0		# 16 bytes of instruction
-	bra.b		iea_dis_cont
-iea_dis_fmovm:
-	btst		&0xe,%d0		# is instr fmovm ctrl
-	bne.b		iea_dis_fmovm_data	# no
-# the instruction is a fmovm.l with 2 or 3 registers.
-	bfextu		%d0{&19:&3},%d1
-	mov.l		&0xc,%d0
-	cmpi.b		%d1,&0x7		# move all regs?
-	bne.b		iea_dis_cont
-	addq.l		&0x4,%d0
-	bra.b		iea_dis_cont
-# the instruction is an fmovm.x dynamic which can use many addressing
-# modes and thus can have several different total instruction lengths.
-# call fmovm_calc_ea which will go through the ea calc process and,
-# as a by-product, will tell us how long the instruction is.
-iea_dis_fmovm_data:
-	clr.l		%d0
-	bsr.l		fmovm_calc_ea
-	mov.l		EXC_EXTWPTR(%a6),%d0
-	sub.l		EXC_PC(%a6),%d0
-iea_dis_cont:
-	mov.w		%d0,EXC_VOFF(%a6)	# store stack shift value
-
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-
-	unlk		%a6
-
-# here, we actually create the 8-word frame from the 4-word frame,
-# with the "next PC" as additional info.
-# the <ea> field is let as undefined.
-	subq.l		&0x8,%sp		# make room for new stack
-	mov.l		%d0,-(%sp)		# save d0
-	mov.w		0xc(%sp),0x4(%sp)	# move SR
-	mov.l		0xe(%sp),0x6(%sp)	# move Current PC
-	clr.l		%d0
-	mov.w		0x12(%sp),%d0
-	mov.l		0x6(%sp),0x10(%sp)	# move Current PC
-	add.l		%d0,0x6(%sp)		# make Next PC
-	mov.w		&0x402c,0xa(%sp)	# insert offset,frame format
-	mov.l		(%sp)+,%d0		# restore d0
-
-	bra.l		_real_fpu_disabled
-
-##########
-
-iea_iacc:
-	movc		%pcr,%d0
-	btst		&0x1,%d0
-	bne.b		iea_iacc_cont
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
-	fmovm.x		EXC_FPREGS(%a6),&0xc0	# restore fp0-fp1 on stack
-iea_iacc_cont:
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-
-	unlk		%a6
-
-	subq.w		&0x8,%sp		# make stack frame bigger
-	mov.l		0x8(%sp),(%sp)		# store SR,hi(PC)
-	mov.w		0xc(%sp),0x4(%sp)	# store lo(PC)
-	mov.w		&0x4008,0x6(%sp)	# store voff
-	mov.l		0x2(%sp),0x8(%sp)	# store ea
-	mov.l		&0x09428001,0xc(%sp)	# store fslw
-
-iea_acc_done:
-	btst		&0x5,(%sp)		# user or supervisor mode?
-	beq.b		iea_acc_done2		# user
-	bset		&0x2,0xd(%sp)		# set supervisor TM bit
-
-iea_acc_done2:
-	bra.l		_real_access
-
-iea_dacc:
-	lea		-LOCAL_SIZE(%a6),%sp
-
-	movc		%pcr,%d1
-	btst		&0x1,%d1
-	bne.b		iea_dacc_cont
-	fmovm.x		EXC_FPREGS(%a6),&0xc0	# restore fp0-fp1 on stack
-	fmovm.l		LOCAL_SIZE+USER_FPCR(%sp),%fpcr,%fpsr,%fpiar # restore ctrl regs
-iea_dacc_cont:
-	mov.l		(%a6),%a6
-
-	mov.l		0x4+LOCAL_SIZE(%sp),-0x8+0x4+LOCAL_SIZE(%sp)
-	mov.w		0x8+LOCAL_SIZE(%sp),-0x8+0x8+LOCAL_SIZE(%sp)
-	mov.w		&0x4008,-0x8+0xa+LOCAL_SIZE(%sp)
-	mov.l		%a0,-0x8+0xc+LOCAL_SIZE(%sp)
-	mov.w		%d0,-0x8+0x10+LOCAL_SIZE(%sp)
-	mov.w		&0x0001,-0x8+0x12+LOCAL_SIZE(%sp)
-
-	movm.l		LOCAL_SIZE+EXC_DREGS(%sp),&0x0303 # restore d0-d1/a0-a1
-	add.w		&LOCAL_SIZE-0x4,%sp
-
-	bra.b		iea_acc_done
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	_fpsp_operr(): 060FPSP entry point for FP Operr exception.	#
-#									#
-#	This handler should be the first code executed upon taking the	#
-#	FP Operand Error exception in an operating system.		#
-#									#
-# XREF ****************************************************************	#
-#	_imem_read_long() - read instruction longword			#
-#	fix_skewed_ops() - adjust src operand in fsave frame		#
-#	_real_operr() - "callout" to operating system operr handler	#
-#	_dmem_write_{byte,word,long}() - store data to mem (opclass 3)	#
-#	store_dreg_{b,w,l}() - store data to data regfile (opclass 3)	#
-#	facc_out_{b,w,l}() - store to memory took access error (opcl 3)	#
-#									#
-# INPUT ***************************************************************	#
-#	- The system stack contains the FP Operr exception frame	#
-#	- The fsave frame contains the source operand			#
-#									#
-# OUTPUT **************************************************************	#
-#	No access error:						#
-#	- The system stack is unchanged					#
-#	- The fsave frame contains the adjusted src op for opclass 0,2	#
-#									#
-# ALGORITHM ***********************************************************	#
-#	In a system where the FP Operr exception is enabled, the goal	#
-# is to get to the handler specified at _real_operr(). But, on the 060,	#
-# for opclass zero and two instruction taking this exception, the	#
-# input operand in the fsave frame may be incorrect for some cases	#
-# and needs to be corrected. This handler calls fix_skewed_ops() to	#
-# do just this and then exits through _real_operr().			#
-#	For opclass 3 instructions, the 060 doesn't store the default	#
-# operr result out to memory or data register file as it should.	#
-# This code must emulate the move out before finally exiting through	#
-# _real_inex(). The move out, if to memory, is performed using		#
-# _mem_write() "callout" routines that may return a failing result.	#
-# In this special case, the handler must exit through facc_out()	#
-# which creates an access error stack frame from the current operr	#
-# stack frame.								#
-#									#
-#########################################################################
-
-	global		_fpsp_operr
-_fpsp_operr:
-
-	link.w		%a6,&-LOCAL_SIZE	# init stack frame
-
-	fsave		FP_SRC(%a6)		# grab the "busy" frame
-
-	movm.l		&0x0303,EXC_DREGS(%a6)	# save d0-d1/a0-a1
-	fmovm.l		%fpcr,%fpsr,%fpiar,USER_FPCR(%a6) # save ctrl regs
-	fmovm.x		&0xc0,EXC_FPREGS(%a6)	# save fp0-fp1 on stack
-
-# the FPIAR holds the "current PC" of the faulting instruction
-	mov.l		USER_FPIAR(%a6),EXC_EXTWPTR(%a6)
-
-	mov.l		EXC_EXTWPTR(%a6),%a0	# fetch instruction addr
-	addq.l		&0x4,EXC_EXTWPTR(%a6)	# incr instruction ptr
-	bsr.l		_imem_read_long		# fetch the instruction words
-	mov.l		%d0,EXC_OPWORD(%a6)
-
-##############################################################################
-
-	btst		&13,%d0			# is instr an fmove out?
-	bne.b		foperr_out		# fmove out
-
-
-# here, we simply see if the operand in the fsave frame needs to be "unskewed".
-# this would be the case for opclass two operations with a source infinity or
-# denorm operand in the sgl or dbl format. NANs also become skewed, but can't
-# cause an operr so we don't need to check for them here.
-	lea		FP_SRC(%a6),%a0		# pass: ptr to src op
-	bsr.l		fix_skewed_ops		# fix src op
-
-foperr_exit:
-	fmovm.x		EXC_FPREGS(%a6),&0xc0	# restore fp0-fp1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-
-	frestore	FP_SRC(%a6)
-
-	unlk		%a6
-	bra.l		_real_operr
-
-########################################################################
-
-#
-# the hardware does not save the default result to memory on enabled
-# operand error exceptions. we do this here before passing control to
-# the user operand error handler.
-#
-# byte, word, and long destination format operations can pass
-# through here. we simply need to test the sign of the src
-# operand and save the appropriate minimum or maximum integer value
-# to the effective address as pointed to by the stacked effective address.
-#
-# although packed opclass three operations can take operand error
-# exceptions, they won't pass through here since they are caught
-# first by the unsupported data format exception handler. that handler
-# sends them directly to _real_operr() if necessary.
-#
-foperr_out:
-
-	mov.w		FP_SRC_EX(%a6),%d1	# fetch exponent
-	andi.w		&0x7fff,%d1
-	cmpi.w		%d1,&0x7fff
-	bne.b		foperr_out_not_qnan
-# the operand is either an infinity or a QNAN.
-	tst.l		FP_SRC_LO(%a6)
-	bne.b		foperr_out_qnan
-	mov.l		FP_SRC_HI(%a6),%d1
-	andi.l		&0x7fffffff,%d1
-	beq.b		foperr_out_not_qnan
-foperr_out_qnan:
-	mov.l		FP_SRC_HI(%a6),L_SCR1(%a6)
-	bra.b		foperr_out_jmp
-
-foperr_out_not_qnan:
-	mov.l		&0x7fffffff,%d1
-	tst.b		FP_SRC_EX(%a6)
-	bpl.b		foperr_out_not_qnan2
-	addq.l		&0x1,%d1
-foperr_out_not_qnan2:
-	mov.l		%d1,L_SCR1(%a6)
-
-foperr_out_jmp:
-	bfextu		%d0{&19:&3},%d0		# extract dst format field
-	mov.b		1+EXC_OPWORD(%a6),%d1	# extract <ea> mode,reg
-	mov.w		(tbl_operr.b,%pc,%d0.w*2),%a0
-	jmp		(tbl_operr.b,%pc,%a0)
-
-tbl_operr:
-	short		foperr_out_l - tbl_operr # long word integer
-	short		tbl_operr    - tbl_operr # sgl prec shouldn't happen
-	short		tbl_operr    - tbl_operr # ext prec shouldn't happen
-	short		foperr_exit  - tbl_operr # packed won't enter here
-	short		foperr_out_w - tbl_operr # word integer
-	short		tbl_operr    - tbl_operr # dbl prec shouldn't happen
-	short		foperr_out_b - tbl_operr # byte integer
-	short		tbl_operr    - tbl_operr # packed won't enter here
-
-foperr_out_b:
-	mov.b		L_SCR1(%a6),%d0		# load positive default result
-	cmpi.b		%d1,&0x7		# is <ea> mode a data reg?
-	ble.b		foperr_out_b_save_dn	# yes
-	mov.l		EXC_EA(%a6),%a0		# pass: <ea> of default result
-	bsr.l		_dmem_write_byte	# write the default result
-
-	tst.l		%d1			# did dstore fail?
-	bne.l		facc_out_b		# yes
-
-	bra.w		foperr_exit
-foperr_out_b_save_dn:
-	andi.w		&0x0007,%d1
-	bsr.l		store_dreg_b		# store result to regfile
-	bra.w		foperr_exit
-
-foperr_out_w:
-	mov.w		L_SCR1(%a6),%d0		# load positive default result
-	cmpi.b		%d1,&0x7		# is <ea> mode a data reg?
-	ble.b		foperr_out_w_save_dn	# yes
-	mov.l		EXC_EA(%a6),%a0		# pass: <ea> of default result
-	bsr.l		_dmem_write_word	# write the default result
-
-	tst.l		%d1			# did dstore fail?
-	bne.l		facc_out_w		# yes
-
-	bra.w		foperr_exit
-foperr_out_w_save_dn:
-	andi.w		&0x0007,%d1
-	bsr.l		store_dreg_w		# store result to regfile
-	bra.w		foperr_exit
-
-foperr_out_l:
-	mov.l		L_SCR1(%a6),%d0		# load positive default result
-	cmpi.b		%d1,&0x7		# is <ea> mode a data reg?
-	ble.b		foperr_out_l_save_dn	# yes
-	mov.l		EXC_EA(%a6),%a0		# pass: <ea> of default result
-	bsr.l		_dmem_write_long	# write the default result
-
-	tst.l		%d1			# did dstore fail?
-	bne.l		facc_out_l		# yes
-
-	bra.w		foperr_exit
-foperr_out_l_save_dn:
-	andi.w		&0x0007,%d1
-	bsr.l		store_dreg_l		# store result to regfile
-	bra.w		foperr_exit
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	_fpsp_snan(): 060FPSP entry point for FP SNAN exception.	#
-#									#
-#	This handler should be the first code executed upon taking the	#
-#	FP Signalling NAN exception in an operating system.		#
-#									#
-# XREF ****************************************************************	#
-#	_imem_read_long() - read instruction longword			#
-#	fix_skewed_ops() - adjust src operand in fsave frame		#
-#	_real_snan() - "callout" to operating system SNAN handler	#
-#	_dmem_write_{byte,word,long}() - store data to mem (opclass 3)	#
-#	store_dreg_{b,w,l}() - store data to data regfile (opclass 3)	#
-#	facc_out_{b,w,l,d,x}() - store to mem took acc error (opcl 3)	#
-#	_calc_ea_fout() - fix An if <ea> is -() or ()+; also get <ea>	#
-#									#
-# INPUT ***************************************************************	#
-#	- The system stack contains the FP SNAN exception frame		#
-#	- The fsave frame contains the source operand			#
-#									#
-# OUTPUT **************************************************************	#
-#	No access error:						#
-#	- The system stack is unchanged					#
-#	- The fsave frame contains the adjusted src op for opclass 0,2	#
-#									#
-# ALGORITHM ***********************************************************	#
-#	In a system where the FP SNAN exception is enabled, the goal	#
-# is to get to the handler specified at _real_snan(). But, on the 060,	#
-# for opclass zero and two instructions taking this exception, the	#
-# input operand in the fsave frame may be incorrect for some cases	#
-# and needs to be corrected. This handler calls fix_skewed_ops() to	#
-# do just this and then exits through _real_snan().			#
-#	For opclass 3 instructions, the 060 doesn't store the default	#
-# SNAN result out to memory or data register file as it should.		#
-# This code must emulate the move out before finally exiting through	#
-# _real_snan(). The move out, if to memory, is performed using		#
-# _mem_write() "callout" routines that may return a failing result.	#
-# In this special case, the handler must exit through facc_out()	#
-# which creates an access error stack frame from the current SNAN	#
-# stack frame.								#
-#	For the case of an extended precision opclass 3 instruction,	#
-# if the effective addressing mode was -() or ()+, then the address	#
-# register must get updated by calling _calc_ea_fout(). If the <ea>	#
-# was -(a7) from supervisor mode, then the exception frame currently	#
-# on the system stack must be carefully moved "down" to make room	#
-# for the operand being moved.						#
-#									#
-#########################################################################
-
-	global		_fpsp_snan
-_fpsp_snan:
-
-	link.w		%a6,&-LOCAL_SIZE	# init stack frame
-
-	fsave		FP_SRC(%a6)		# grab the "busy" frame
-
-	movm.l		&0x0303,EXC_DREGS(%a6)	# save d0-d1/a0-a1
-	fmovm.l		%fpcr,%fpsr,%fpiar,USER_FPCR(%a6) # save ctrl regs
-	fmovm.x		&0xc0,EXC_FPREGS(%a6)	# save fp0-fp1 on stack
-
-# the FPIAR holds the "current PC" of the faulting instruction
-	mov.l		USER_FPIAR(%a6),EXC_EXTWPTR(%a6)
-
-	mov.l		EXC_EXTWPTR(%a6),%a0	# fetch instruction addr
-	addq.l		&0x4,EXC_EXTWPTR(%a6)	# incr instruction ptr
-	bsr.l		_imem_read_long		# fetch the instruction words
-	mov.l		%d0,EXC_OPWORD(%a6)
-
-##############################################################################
-
-	btst		&13,%d0			# is instr an fmove out?
-	bne.w		fsnan_out		# fmove out
-
-
-# here, we simply see if the operand in the fsave frame needs to be "unskewed".
-# this would be the case for opclass two operations with a source infinity or
-# denorm operand in the sgl or dbl format. NANs also become skewed and must be
-# fixed here.
-	lea		FP_SRC(%a6),%a0		# pass: ptr to src op
-	bsr.l		fix_skewed_ops		# fix src op
-
-fsnan_exit:
-	fmovm.x		EXC_FPREGS(%a6),&0xc0	# restore fp0-fp1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-
-	frestore	FP_SRC(%a6)
-
-	unlk		%a6
-	bra.l		_real_snan
-
-########################################################################
-
-#
-# the hardware does not save the default result to memory on enabled
-# snan exceptions. we do this here before passing control to
-# the user snan handler.
-#
-# byte, word, long, and packed destination format operations can pass
-# through here. since packed format operations already were handled by
-# fpsp_unsupp(), then we need to do nothing else for them here.
-# for byte, word, and long, we simply need to test the sign of the src
-# operand and save the appropriate minimum or maximum integer value
-# to the effective address as pointed to by the stacked effective address.
-#
-fsnan_out:
-
-	bfextu		%d0{&19:&3},%d0		# extract dst format field
-	mov.b		1+EXC_OPWORD(%a6),%d1	# extract <ea> mode,reg
-	mov.w		(tbl_snan.b,%pc,%d0.w*2),%a0
-	jmp		(tbl_snan.b,%pc,%a0)
-
-tbl_snan:
-	short		fsnan_out_l - tbl_snan # long word integer
-	short		fsnan_out_s - tbl_snan # sgl prec shouldn't happen
-	short		fsnan_out_x - tbl_snan # ext prec shouldn't happen
-	short		tbl_snan    - tbl_snan # packed needs no help
-	short		fsnan_out_w - tbl_snan # word integer
-	short		fsnan_out_d - tbl_snan # dbl prec shouldn't happen
-	short		fsnan_out_b - tbl_snan # byte integer
-	short		tbl_snan    - tbl_snan # packed needs no help
-
-fsnan_out_b:
-	mov.b		FP_SRC_HI(%a6),%d0	# load upper byte of SNAN
-	bset		&6,%d0			# set SNAN bit
-	cmpi.b		%d1,&0x7		# is <ea> mode a data reg?
-	ble.b		fsnan_out_b_dn		# yes
-	mov.l		EXC_EA(%a6),%a0		# pass: <ea> of default result
-	bsr.l		_dmem_write_byte	# write the default result
-
-	tst.l		%d1			# did dstore fail?
-	bne.l		facc_out_b		# yes
-
-	bra.w		fsnan_exit
-fsnan_out_b_dn:
-	andi.w		&0x0007,%d1
-	bsr.l		store_dreg_b		# store result to regfile
-	bra.w		fsnan_exit
-
-fsnan_out_w:
-	mov.w		FP_SRC_HI(%a6),%d0	# load upper word of SNAN
-	bset		&14,%d0			# set SNAN bit
-	cmpi.b		%d1,&0x7		# is <ea> mode a data reg?
-	ble.b		fsnan_out_w_dn		# yes
-	mov.l		EXC_EA(%a6),%a0		# pass: <ea> of default result
-	bsr.l		_dmem_write_word	# write the default result
-
-	tst.l		%d1			# did dstore fail?
-	bne.l		facc_out_w		# yes
-
-	bra.w		fsnan_exit
-fsnan_out_w_dn:
-	andi.w		&0x0007,%d1
-	bsr.l		store_dreg_w		# store result to regfile
-	bra.w		fsnan_exit
-
-fsnan_out_l:
-	mov.l		FP_SRC_HI(%a6),%d0	# load upper longword of SNAN
-	bset		&30,%d0			# set SNAN bit
-	cmpi.b		%d1,&0x7		# is <ea> mode a data reg?
-	ble.b		fsnan_out_l_dn		# yes
-	mov.l		EXC_EA(%a6),%a0		# pass: <ea> of default result
-	bsr.l		_dmem_write_long	# write the default result
-
-	tst.l		%d1			# did dstore fail?
-	bne.l		facc_out_l		# yes
-
-	bra.w		fsnan_exit
-fsnan_out_l_dn:
-	andi.w		&0x0007,%d1
-	bsr.l		store_dreg_l		# store result to regfile
-	bra.w		fsnan_exit
-
-fsnan_out_s:
-	cmpi.b		%d1,&0x7		# is <ea> mode a data reg?
-	ble.b		fsnan_out_d_dn		# yes
-	mov.l		FP_SRC_EX(%a6),%d0	# fetch SNAN sign
-	andi.l		&0x80000000,%d0		# keep sign
-	ori.l		&0x7fc00000,%d0		# insert new exponent,SNAN bit
-	mov.l		FP_SRC_HI(%a6),%d1	# load mantissa
-	lsr.l		&0x8,%d1		# shift mantissa for sgl
-	or.l		%d1,%d0			# create sgl SNAN
-	mov.l		EXC_EA(%a6),%a0		# pass: <ea> of default result
-	bsr.l		_dmem_write_long	# write the default result
-
-	tst.l		%d1			# did dstore fail?
-	bne.l		facc_out_l		# yes
-
-	bra.w		fsnan_exit
-fsnan_out_d_dn:
-	mov.l		FP_SRC_EX(%a6),%d0	# fetch SNAN sign
-	andi.l		&0x80000000,%d0		# keep sign
-	ori.l		&0x7fc00000,%d0		# insert new exponent,SNAN bit
-	mov.l		%d1,-(%sp)
-	mov.l		FP_SRC_HI(%a6),%d1	# load mantissa
-	lsr.l		&0x8,%d1		# shift mantissa for sgl
-	or.l		%d1,%d0			# create sgl SNAN
-	mov.l		(%sp)+,%d1
-	andi.w		&0x0007,%d1
-	bsr.l		store_dreg_l		# store result to regfile
-	bra.w		fsnan_exit
-
-fsnan_out_d:
-	mov.l		FP_SRC_EX(%a6),%d0	# fetch SNAN sign
-	andi.l		&0x80000000,%d0		# keep sign
-	ori.l		&0x7ff80000,%d0		# insert new exponent,SNAN bit
-	mov.l		FP_SRC_HI(%a6),%d1	# load hi mantissa
-	mov.l		%d0,FP_SCR0_EX(%a6)	# store to temp space
-	mov.l		&11,%d0			# load shift amt
-	lsr.l		%d0,%d1
-	or.l		%d1,FP_SCR0_EX(%a6)	# create dbl hi
-	mov.l		FP_SRC_HI(%a6),%d1	# load hi mantissa
-	andi.l		&0x000007ff,%d1
-	ror.l		%d0,%d1
-	mov.l		%d1,FP_SCR0_HI(%a6)	# store to temp space
-	mov.l		FP_SRC_LO(%a6),%d1	# load lo mantissa
-	lsr.l		%d0,%d1
-	or.l		%d1,FP_SCR0_HI(%a6)	# create dbl lo
-	lea		FP_SCR0(%a6),%a0	# pass: ptr to operand
-	mov.l		EXC_EA(%a6),%a1		# pass: dst addr
-	movq.l		&0x8,%d0		# pass: size of 8 bytes
-	bsr.l		_dmem_write		# write the default result
-
-	tst.l		%d1			# did dstore fail?
-	bne.l		facc_out_d		# yes
-
-	bra.w		fsnan_exit
-
-# for extended precision, if the addressing mode is pre-decrement or
-# post-increment, then the address register did not get updated.
-# in addition, for pre-decrement, the stacked <ea> is incorrect.
-fsnan_out_x:
-	clr.b		SPCOND_FLG(%a6)		# clear special case flag
-
-	mov.w		FP_SRC_EX(%a6),FP_SCR0_EX(%a6)
-	clr.w		2+FP_SCR0(%a6)
-	mov.l		FP_SRC_HI(%a6),%d0
-	bset		&30,%d0
-	mov.l		%d0,FP_SCR0_HI(%a6)
-	mov.l		FP_SRC_LO(%a6),FP_SCR0_LO(%a6)
-
-	btst		&0x5,EXC_SR(%a6)	# supervisor mode exception?
-	bne.b		fsnan_out_x_s		# yes
-
-	mov.l		%usp,%a0		# fetch user stack pointer
-	mov.l		%a0,EXC_A7(%a6)		# save on stack for calc_ea()
-	mov.l		(%a6),EXC_A6(%a6)
-
-	bsr.l		_calc_ea_fout		# find the correct ea,update An
-	mov.l		%a0,%a1
-	mov.l		%a0,EXC_EA(%a6)		# stack correct <ea>
-
-	mov.l		EXC_A7(%a6),%a0
-	mov.l		%a0,%usp		# restore user stack pointer
-	mov.l		EXC_A6(%a6),(%a6)
-
-fsnan_out_x_save:
-	lea		FP_SCR0(%a6),%a0	# pass: ptr to operand
-	movq.l		&0xc,%d0		# pass: size of extended
-	bsr.l		_dmem_write		# write the default result
-
-	tst.l		%d1			# did dstore fail?
-	bne.l		facc_out_x		# yes
-
-	bra.w		fsnan_exit
-
-fsnan_out_x_s:
-	mov.l		(%a6),EXC_A6(%a6)
-
-	bsr.l		_calc_ea_fout		# find the correct ea,update An
-	mov.l		%a0,%a1
-	mov.l		%a0,EXC_EA(%a6)		# stack correct <ea>
-
-	mov.l		EXC_A6(%a6),(%a6)
-
-	cmpi.b		SPCOND_FLG(%a6),&mda7_flg # is <ea> mode -(a7)?
-	bne.b		fsnan_out_x_save	# no
-
-# the operation was "fmove.x SNAN,-(a7)" from supervisor mode.
-	fmovm.x		EXC_FPREGS(%a6),&0xc0	# restore fp0-fp1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-
-	frestore	FP_SRC(%a6)
-
-	mov.l		EXC_A6(%a6),%a6		# restore frame pointer
-
-	mov.l		LOCAL_SIZE+EXC_SR(%sp),LOCAL_SIZE+EXC_SR-0xc(%sp)
-	mov.l		LOCAL_SIZE+EXC_PC+0x2(%sp),LOCAL_SIZE+EXC_PC+0x2-0xc(%sp)
-	mov.l		LOCAL_SIZE+EXC_EA(%sp),LOCAL_SIZE+EXC_EA-0xc(%sp)
-
-	mov.l		LOCAL_SIZE+FP_SCR0_EX(%sp),LOCAL_SIZE+EXC_SR(%sp)
-	mov.l		LOCAL_SIZE+FP_SCR0_HI(%sp),LOCAL_SIZE+EXC_PC+0x2(%sp)
-	mov.l		LOCAL_SIZE+FP_SCR0_LO(%sp),LOCAL_SIZE+EXC_EA(%sp)
-
-	add.l		&LOCAL_SIZE-0x8,%sp
-
-	bra.l		_real_snan
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	_fpsp_inex(): 060FPSP entry point for FP Inexact exception.	#
-#									#
-#	This handler should be the first code executed upon taking the	#
-#	FP Inexact exception in an operating system.			#
-#									#
-# XREF ****************************************************************	#
-#	_imem_read_long() - read instruction longword			#
-#	fix_skewed_ops() - adjust src operand in fsave frame		#
-#	set_tag_x() - determine optype of src/dst operands		#
-#	store_fpreg() - store opclass 0 or 2 result to FP regfile	#
-#	unnorm_fix() - change UNNORM operands to NORM or ZERO		#
-#	load_fpn2() - load dst operand from FP regfile			#
-#	smovcr() - emulate an "fmovcr" instruction			#
-#	fout() - emulate an opclass 3 instruction			#
-#	tbl_unsupp - add of table of emulation routines for opclass 0,2	#
-#	_real_inex() - "callout" to operating system inexact handler	#
-#									#
-# INPUT ***************************************************************	#
-#	- The system stack contains the FP Inexact exception frame	#
-#	- The fsave frame contains the source operand			#
-#									#
-# OUTPUT **************************************************************	#
-#	- The system stack is unchanged					#
-#	- The fsave frame contains the adjusted src op for opclass 0,2	#
-#									#
-# ALGORITHM ***********************************************************	#
-#	In a system where the FP Inexact exception is enabled, the goal	#
-# is to get to the handler specified at _real_inex(). But, on the 060,	#
-# for opclass zero and two instruction taking this exception, the	#
-# hardware doesn't store the correct result to the destination FP	#
-# register as did the '040 and '881/2. This handler must emulate the	#
-# instruction in order to get this value and then store it to the	#
-# correct register before calling _real_inex().				#
-#	For opclass 3 instructions, the 060 doesn't store the default	#
-# inexact result out to memory or data register file as it should.	#
-# This code must emulate the move out by calling fout() before finally	#
-# exiting through _real_inex().						#
-#									#
-#########################################################################
-
-	global		_fpsp_inex
-_fpsp_inex:
-
-	link.w		%a6,&-LOCAL_SIZE	# init stack frame
-
-	fsave		FP_SRC(%a6)		# grab the "busy" frame
-
-	movm.l		&0x0303,EXC_DREGS(%a6)	# save d0-d1/a0-a1
-	fmovm.l		%fpcr,%fpsr,%fpiar,USER_FPCR(%a6) # save ctrl regs
-	fmovm.x		&0xc0,EXC_FPREGS(%a6)	# save fp0-fp1 on stack
-
-# the FPIAR holds the "current PC" of the faulting instruction
-	mov.l		USER_FPIAR(%a6),EXC_EXTWPTR(%a6)
-
-	mov.l		EXC_EXTWPTR(%a6),%a0	# fetch instruction addr
-	addq.l		&0x4,EXC_EXTWPTR(%a6)	# incr instruction ptr
-	bsr.l		_imem_read_long		# fetch the instruction words
-	mov.l		%d0,EXC_OPWORD(%a6)
-
-##############################################################################
-
-	btst		&13,%d0			# is instr an fmove out?
-	bne.w		finex_out		# fmove out
-
-
-# the hardware, for "fabs" and "fneg" w/ a long source format, puts the
-# longword integer directly into the upper longword of the mantissa along
-# w/ an exponent value of 0x401e. we convert this to extended precision here.
-	bfextu		%d0{&19:&3},%d0		# fetch instr size
-	bne.b		finex_cont		# instr size is not long
-	cmpi.w		FP_SRC_EX(%a6),&0x401e	# is exponent 0x401e?
-	bne.b		finex_cont		# no
-	fmov.l		&0x0,%fpcr
-	fmov.l		FP_SRC_HI(%a6),%fp0	# load integer src
-	fmov.x		%fp0,FP_SRC(%a6)	# store integer as extended precision
-	mov.w		&0xe001,0x2+FP_SRC(%a6)
-
-finex_cont:
-	lea		FP_SRC(%a6),%a0		# pass: ptr to src op
-	bsr.l		fix_skewed_ops		# fix src op
-
-# Here, we zero the ccode and exception byte field since we're going to
-# emulate the whole instruction. Notice, though, that we don't kill the
-# INEX1 bit. This is because a packed op has long since been converted
-# to extended before arriving here. Therefore, we need to retain the
-# INEX1 bit from when the operand was first converted.
-	andi.l		&0x00ff01ff,USER_FPSR(%a6) # zero all but accured field
-
-	fmov.l		&0x0,%fpcr		# zero current control regs
-	fmov.l		&0x0,%fpsr
-
-	bfextu		EXC_EXTWORD(%a6){&0:&6},%d1 # extract upper 6 of cmdreg
-	cmpi.b		%d1,&0x17		# is op an fmovecr?
-	beq.w		finex_fmovcr		# yes
-
-	lea		FP_SRC(%a6),%a0		# pass: ptr to src op
-	bsr.l		set_tag_x		# tag the operand type
-	mov.b		%d0,STAG(%a6)		# maybe NORM,DENORM
-
-# bits four and five of the fp extension word separate the monadic and dyadic
-# operations that can pass through fpsp_inex(). remember that fcmp and ftst
-# will never take this exception, but fsincos will.
-	btst		&0x5,1+EXC_CMDREG(%a6)	# is operation monadic or dyadic?
-	beq.b		finex_extract		# monadic
-
-	btst		&0x4,1+EXC_CMDREG(%a6)	# is operation an fsincos?
-	bne.b		finex_extract		# yes
-
-	bfextu		EXC_CMDREG(%a6){&6:&3},%d0 # dyadic; load dst reg
-	bsr.l		load_fpn2		# load dst into FP_DST
-
-	lea		FP_DST(%a6),%a0		# pass: ptr to dst op
-	bsr.l		set_tag_x		# tag the operand type
-	cmpi.b		%d0,&UNNORM		# is operand an UNNORM?
-	bne.b		finex_op2_done		# no
-	bsr.l		unnorm_fix		# yes; convert to NORM,DENORM,or ZERO
-finex_op2_done:
-	mov.b		%d0,DTAG(%a6)		# save dst optype tag
-
-finex_extract:
-	clr.l		%d0
-	mov.b		FPCR_MODE(%a6),%d0	# pass rnd prec/mode
-
-	mov.b		1+EXC_CMDREG(%a6),%d1
-	andi.w		&0x007f,%d1		# extract extension
-
-	lea		FP_SRC(%a6),%a0
-	lea		FP_DST(%a6),%a1
-
-	mov.l		(tbl_unsupp.l,%pc,%d1.w*4),%d1 # fetch routine addr
-	jsr		(tbl_unsupp.l,%pc,%d1.l*1)
-
-# the operation has been emulated. the result is in fp0.
-finex_save:
-	bfextu		EXC_CMDREG(%a6){&6:&3},%d0
-	bsr.l		store_fpreg
-
-finex_exit:
-	fmovm.x		EXC_FPREGS(%a6),&0xc0	# restore fp0-fp1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-
-	frestore	FP_SRC(%a6)
-
-	unlk		%a6
-	bra.l		_real_inex
-
-finex_fmovcr:
-	clr.l		%d0
-	mov.b		FPCR_MODE(%a6),%d0	# pass rnd prec,mode
-	mov.b		1+EXC_CMDREG(%a6),%d1
-	andi.l		&0x0000007f,%d1		# pass rom offset
-	bsr.l		smovcr
-	bra.b		finex_save
-
-########################################################################
-
-#
-# the hardware does not save the default result to memory on enabled
-# inexact exceptions. we do this here before passing control to
-# the user inexact handler.
-#
-# byte, word, and long destination format operations can pass
-# through here. so can double and single precision.
-# although packed opclass three operations can take inexact
-# exceptions, they won't pass through here since they are caught
-# first by the unsupported data format exception handler. that handler
-# sends them directly to _real_inex() if necessary.
-#
-finex_out:
-
-	mov.b		&NORM,STAG(%a6)		# src is a NORM
-
-	clr.l		%d0
-	mov.b		FPCR_MODE(%a6),%d0	# pass rnd prec,mode
-
-	andi.l		&0xffff00ff,USER_FPSR(%a6) # zero exception field
-
-	lea		FP_SRC(%a6),%a0		# pass ptr to src operand
-
-	bsr.l		fout			# store the default result
-
-	bra.b		finex_exit
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	_fpsp_dz(): 060FPSP entry point for FP DZ exception.		#
-#									#
-#	This handler should be the first code executed upon taking	#
-#	the FP DZ exception in an operating system.			#
-#									#
-# XREF ****************************************************************	#
-#	_imem_read_long() - read instruction longword from memory	#
-#	fix_skewed_ops() - adjust fsave operand				#
-#	_real_dz() - "callout" exit point from FP DZ handler		#
-#									#
-# INPUT ***************************************************************	#
-#	- The system stack contains the FP DZ exception stack.		#
-#	- The fsave frame contains the source operand.			#
-#									#
-# OUTPUT **************************************************************	#
-#	- The system stack contains the FP DZ exception stack.		#
-#	- The fsave frame contains the adjusted source operand.		#
-#									#
-# ALGORITHM ***********************************************************	#
-#	In a system where the DZ exception is enabled, the goal is to	#
-# get to the handler specified at _real_dz(). But, on the 060, when the	#
-# exception is taken, the input operand in the fsave state frame may	#
-# be incorrect for some cases and need to be adjusted. So, this package	#
-# adjusts the operand using fix_skewed_ops() and then branches to	#
-# _real_dz().								#
-#									#
-#########################################################################
-
-	global		_fpsp_dz
-_fpsp_dz:
-
-	link.w		%a6,&-LOCAL_SIZE	# init stack frame
-
-	fsave		FP_SRC(%a6)		# grab the "busy" frame
-
-	movm.l		&0x0303,EXC_DREGS(%a6)	# save d0-d1/a0-a1
-	fmovm.l		%fpcr,%fpsr,%fpiar,USER_FPCR(%a6) # save ctrl regs
-	fmovm.x		&0xc0,EXC_FPREGS(%a6)	# save fp0-fp1 on stack
-
-# the FPIAR holds the "current PC" of the faulting instruction
-	mov.l		USER_FPIAR(%a6),EXC_EXTWPTR(%a6)
-
-	mov.l		EXC_EXTWPTR(%a6),%a0	# fetch instruction addr
-	addq.l		&0x4,EXC_EXTWPTR(%a6)	# incr instruction ptr
-	bsr.l		_imem_read_long		# fetch the instruction words
-	mov.l		%d0,EXC_OPWORD(%a6)
-
-##############################################################################
-
-
-# here, we simply see if the operand in the fsave frame needs to be "unskewed".
-# this would be the case for opclass two operations with a source zero
-# in the sgl or dbl format.
-	lea		FP_SRC(%a6),%a0		# pass: ptr to src op
-	bsr.l		fix_skewed_ops		# fix src op
-
-fdz_exit:
-	fmovm.x		EXC_FPREGS(%a6),&0xc0	# restore fp0-fp1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-
-	frestore	FP_SRC(%a6)
-
-	unlk		%a6
-	bra.l		_real_dz
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	_fpsp_fline(): 060FPSP entry point for "Line F emulator"	#
-#		       exception when the "reduced" version of the	#
-#		       FPSP is implemented that does not emulate	#
-#		       FP unimplemented instructions.			#
-#									#
-#	This handler should be the first code executed upon taking a	#
-#	"Line F Emulator" exception in an operating system integrating	#
-#	the reduced version of 060FPSP.					#
-#									#
-# XREF ****************************************************************	#
-#	_real_fpu_disabled() - Handle "FPU disabled" exceptions		#
-#	_real_fline() - Handle all other cases (treated equally)	#
-#									#
-# INPUT ***************************************************************	#
-#	- The system stack contains a "Line F Emulator" exception	#
-#	  stack frame.							#
-#									#
-# OUTPUT **************************************************************	#
-#	- The system stack is unchanged.				#
-#									#
-# ALGORITHM ***********************************************************	#
-#	When a "Line F Emulator" exception occurs in a system where	#
-# "FPU Unimplemented" instructions will not be emulated, the exception	#
-# can occur because then FPU is disabled or the instruction is to be	#
-# classifed as "Line F". This module determines which case exists and	#
-# calls the appropriate "callout".					#
-#									#
-#########################################################################
-
-	global		_fpsp_fline
-_fpsp_fline:
-
-# check to see if the FPU is disabled. if so, jump to the OS entry
-# point for that condition.
-	cmpi.w		0x6(%sp),&0x402c
-	beq.l		_real_fpu_disabled
-
-	bra.l		_real_fline
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	_dcalc_ea(): calc correct <ea> from <ea> stacked on exception	#
-#									#
-# XREF ****************************************************************	#
-#	inc_areg() - increment an address register			#
-#	dec_areg() - decrement an address register			#
-#									#
-# INPUT ***************************************************************	#
-#	d0 = number of bytes to adjust <ea> by				#
-#									#
-# OUTPUT **************************************************************	#
-#	None								#
-#									#
-# ALGORITHM ***********************************************************	#
-# "Dummy" CALCulate Effective Address:					#
-#	The stacked <ea> for FP unimplemented instructions and opclass	#
-#	two packed instructions is correct with the exception of...	#
-#									#
-#	1) -(An)   : The register is not updated regardless of size.	#
-#		     Also, for extended precision and packed, the	#
-#		     stacked <ea> value is 8 bytes too big		#
-#	2) (An)+   : The register is not updated.			#
-#	3) #<data> : The upper longword of the immediate operand is	#
-#		     stacked b,w,l and s sizes are completely stacked.	#
-#		     d,x, and p are not.				#
-#									#
-#########################################################################
-
-	global		_dcalc_ea
-_dcalc_ea:
-	mov.l		%d0, %a0		# move # bytes to %a0
-
-	mov.b		1+EXC_OPWORD(%a6), %d0	# fetch opcode word
-	mov.l		%d0, %d1		# make a copy
-
-	andi.w		&0x38, %d0		# extract mode field
-	andi.l		&0x7, %d1		# extract reg  field
-
-	cmpi.b		%d0,&0x18		# is mode (An)+ ?
-	beq.b		dcea_pi			# yes
-
-	cmpi.b		%d0,&0x20		# is mode -(An) ?
-	beq.b		dcea_pd			# yes
-
-	or.w		%d1,%d0			# concat mode,reg
-	cmpi.b		%d0,&0x3c		# is mode #<data>?
-
-	beq.b		dcea_imm		# yes
-
-	mov.l		EXC_EA(%a6),%a0		# return <ea>
-	rts
-
-# need to set immediate data flag here since we'll need to do
-# an imem_read to fetch this later.
-dcea_imm:
-	mov.b		&immed_flg,SPCOND_FLG(%a6)
-	lea		([USER_FPIAR,%a6],0x4),%a0 # no; return <ea>
-	rts
-
-# here, the <ea> is stacked correctly. however, we must update the
-# address register...
-dcea_pi:
-	mov.l		%a0,%d0			# pass amt to inc by
-	bsr.l		inc_areg		# inc addr register
-
-	mov.l		EXC_EA(%a6),%a0		# stacked <ea> is correct
-	rts
-
-# the <ea> is stacked correctly for all but extended and packed which
-# the <ea>s are 8 bytes too large.
-# it would make no sense to have a pre-decrement to a7 in supervisor
-# mode so we don't even worry about this tricky case here : )
-dcea_pd:
-	mov.l		%a0,%d0			# pass amt to dec by
-	bsr.l		dec_areg		# dec addr register
-
-	mov.l		EXC_EA(%a6),%a0		# stacked <ea> is correct
-
-	cmpi.b		%d0,&0xc		# is opsize ext or packed?
-	beq.b		dcea_pd2		# yes
-	rts
-dcea_pd2:
-	sub.l		&0x8,%a0		# correct <ea>
-	mov.l		%a0,EXC_EA(%a6)		# put correct <ea> on stack
-	rts
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	_calc_ea_fout(): calculate correct stacked <ea> for extended	#
-#			 and packed data opclass 3 operations.		#
-#									#
-# XREF ****************************************************************	#
-#	None								#
-#									#
-# INPUT ***************************************************************	#
-#	None								#
-#									#
-# OUTPUT **************************************************************	#
-#	a0 = return correct effective address				#
-#									#
-# ALGORITHM ***********************************************************	#
-#	For opclass 3 extended and packed data operations, the <ea>	#
-# stacked for the exception is incorrect for -(an) and (an)+ addressing	#
-# modes. Also, while we're at it, the index register itself must get	#
-# updated.								#
-#	So, for -(an), we must subtract 8 off of the stacked <ea> value	#
-# and return that value as the correct <ea> and store that value in An.	#
-# For (an)+, the stacked <ea> is correct but we must adjust An by +12.	#
-#									#
-#########################################################################
-
-# This calc_ea is currently used to retrieve the correct <ea>
-# for fmove outs of type extended and packed.
-	global		_calc_ea_fout
-_calc_ea_fout:
-	mov.b		1+EXC_OPWORD(%a6),%d0	# fetch opcode word
-	mov.l		%d0,%d1			# make a copy
-
-	andi.w		&0x38,%d0		# extract mode field
-	andi.l		&0x7,%d1		# extract reg  field
-
-	cmpi.b		%d0,&0x18		# is mode (An)+ ?
-	beq.b		ceaf_pi			# yes
-
-	cmpi.b		%d0,&0x20		# is mode -(An) ?
-	beq.w		ceaf_pd			# yes
-
-	mov.l		EXC_EA(%a6),%a0		# stacked <ea> is correct
-	rts
-
-# (An)+ : extended and packed fmove out
-#	: stacked <ea> is correct
-#	: "An" not updated
-ceaf_pi:
-	mov.w		(tbl_ceaf_pi.b,%pc,%d1.w*2),%d1
-	mov.l		EXC_EA(%a6),%a0
-	jmp		(tbl_ceaf_pi.b,%pc,%d1.w*1)
-
-	swbeg		&0x8
-tbl_ceaf_pi:
-	short		ceaf_pi0 - tbl_ceaf_pi
-	short		ceaf_pi1 - tbl_ceaf_pi
-	short		ceaf_pi2 - tbl_ceaf_pi
-	short		ceaf_pi3 - tbl_ceaf_pi
-	short		ceaf_pi4 - tbl_ceaf_pi
-	short		ceaf_pi5 - tbl_ceaf_pi
-	short		ceaf_pi6 - tbl_ceaf_pi
-	short		ceaf_pi7 - tbl_ceaf_pi
-
-ceaf_pi0:
-	addi.l		&0xc,EXC_DREGS+0x8(%a6)
-	rts
-ceaf_pi1:
-	addi.l		&0xc,EXC_DREGS+0xc(%a6)
-	rts
-ceaf_pi2:
-	add.l		&0xc,%a2
-	rts
-ceaf_pi3:
-	add.l		&0xc,%a3
-	rts
-ceaf_pi4:
-	add.l		&0xc,%a4
-	rts
-ceaf_pi5:
-	add.l		&0xc,%a5
-	rts
-ceaf_pi6:
-	addi.l		&0xc,EXC_A6(%a6)
-	rts
-ceaf_pi7:
-	mov.b		&mia7_flg,SPCOND_FLG(%a6)
-	addi.l		&0xc,EXC_A7(%a6)
-	rts
-
-# -(An) : extended and packed fmove out
-#	: stacked <ea> = actual <ea> + 8
-#	: "An" not updated
-ceaf_pd:
-	mov.w		(tbl_ceaf_pd.b,%pc,%d1.w*2),%d1
-	mov.l		EXC_EA(%a6),%a0
-	sub.l		&0x8,%a0
-	sub.l		&0x8,EXC_EA(%a6)
-	jmp		(tbl_ceaf_pd.b,%pc,%d1.w*1)
-
-	swbeg		&0x8
-tbl_ceaf_pd:
-	short		ceaf_pd0 - tbl_ceaf_pd
-	short		ceaf_pd1 - tbl_ceaf_pd
-	short		ceaf_pd2 - tbl_ceaf_pd
-	short		ceaf_pd3 - tbl_ceaf_pd
-	short		ceaf_pd4 - tbl_ceaf_pd
-	short		ceaf_pd5 - tbl_ceaf_pd
-	short		ceaf_pd6 - tbl_ceaf_pd
-	short		ceaf_pd7 - tbl_ceaf_pd
-
-ceaf_pd0:
-	mov.l		%a0,EXC_DREGS+0x8(%a6)
-	rts
-ceaf_pd1:
-	mov.l		%a0,EXC_DREGS+0xc(%a6)
-	rts
-ceaf_pd2:
-	mov.l		%a0,%a2
-	rts
-ceaf_pd3:
-	mov.l		%a0,%a3
-	rts
-ceaf_pd4:
-	mov.l		%a0,%a4
-	rts
-ceaf_pd5:
-	mov.l		%a0,%a5
-	rts
-ceaf_pd6:
-	mov.l		%a0,EXC_A6(%a6)
-	rts
-ceaf_pd7:
-	mov.l		%a0,EXC_A7(%a6)
-	mov.b		&mda7_flg,SPCOND_FLG(%a6)
-	rts
-
-#
-# This table holds the offsets of the emulation routines for each individual
-# math operation relative to the address of this table. Included are
-# routines like fadd/fmul/fabs. The transcendentals ARE NOT. This is because
-# this table is for the version if the 060FPSP without transcendentals.
-# The location within the table is determined by the extension bits of the
-# operation longword.
-#
-
-	swbeg		&109
-tbl_unsupp:
-	long		fin		- tbl_unsupp	# 00: fmove
-	long		fint		- tbl_unsupp	# 01: fint
-	long		tbl_unsupp	- tbl_unsupp	# 02: fsinh
-	long		fintrz		- tbl_unsupp	# 03: fintrz
-	long		fsqrt		- tbl_unsupp	# 04: fsqrt
-	long		tbl_unsupp	- tbl_unsupp
-	long		tbl_unsupp	- tbl_unsupp	# 06: flognp1
-	long		tbl_unsupp	- tbl_unsupp
-	long		tbl_unsupp	- tbl_unsupp	# 08: fetoxm1
-	long		tbl_unsupp	- tbl_unsupp	# 09: ftanh
-	long		tbl_unsupp	- tbl_unsupp	# 0a: fatan
-	long		tbl_unsupp	- tbl_unsupp
-	long		tbl_unsupp	- tbl_unsupp	# 0c: fasin
-	long		tbl_unsupp	- tbl_unsupp	# 0d: fatanh
-	long		tbl_unsupp	- tbl_unsupp	# 0e: fsin
-	long		tbl_unsupp	- tbl_unsupp	# 0f: ftan
-	long		tbl_unsupp	- tbl_unsupp	# 10: fetox
-	long		tbl_unsupp	- tbl_unsupp	# 11: ftwotox
-	long		tbl_unsupp	- tbl_unsupp	# 12: ftentox
-	long		tbl_unsupp	- tbl_unsupp
-	long		tbl_unsupp	- tbl_unsupp	# 14: flogn
-	long		tbl_unsupp	- tbl_unsupp	# 15: flog10
-	long		tbl_unsupp	- tbl_unsupp	# 16: flog2
-	long		tbl_unsupp	- tbl_unsupp
-	long		fabs		- tbl_unsupp	# 18: fabs
-	long		tbl_unsupp	- tbl_unsupp	# 19: fcosh
-	long		fneg		- tbl_unsupp	# 1a: fneg
-	long		tbl_unsupp	- tbl_unsupp
-	long		tbl_unsupp	- tbl_unsupp	# 1c: facos
-	long		tbl_unsupp	- tbl_unsupp	# 1d: fcos
-	long		tbl_unsupp	- tbl_unsupp	# 1e: fgetexp
-	long		tbl_unsupp	- tbl_unsupp	# 1f: fgetman
-	long		fdiv		- tbl_unsupp	# 20: fdiv
-	long		tbl_unsupp	- tbl_unsupp	# 21: fmod
-	long		fadd		- tbl_unsupp	# 22: fadd
-	long		fmul		- tbl_unsupp	# 23: fmul
-	long		fsgldiv		- tbl_unsupp	# 24: fsgldiv
-	long		tbl_unsupp	- tbl_unsupp	# 25: frem
-	long		tbl_unsupp	- tbl_unsupp	# 26: fscale
-	long		fsglmul		- tbl_unsupp	# 27: fsglmul
-	long		fsub		- tbl_unsupp	# 28: fsub
-	long		tbl_unsupp	- tbl_unsupp
-	long		tbl_unsupp	- tbl_unsupp
-	long		tbl_unsupp	- tbl_unsupp
-	long		tbl_unsupp	- tbl_unsupp
-	long		tbl_unsupp	- tbl_unsupp
-	long		tbl_unsupp	- tbl_unsupp
-	long		tbl_unsupp	- tbl_unsupp
-	long		tbl_unsupp	- tbl_unsupp	# 30: fsincos
-	long		tbl_unsupp	- tbl_unsupp	# 31: fsincos
-	long		tbl_unsupp	- tbl_unsupp	# 32: fsincos
-	long		tbl_unsupp	- tbl_unsupp	# 33: fsincos
-	long		tbl_unsupp	- tbl_unsupp	# 34: fsincos
-	long		tbl_unsupp	- tbl_unsupp	# 35: fsincos
-	long		tbl_unsupp	- tbl_unsupp	# 36: fsincos
-	long		tbl_unsupp	- tbl_unsupp	# 37: fsincos
-	long		fcmp		- tbl_unsupp	# 38: fcmp
-	long		tbl_unsupp	- tbl_unsupp
-	long		ftst		- tbl_unsupp	# 3a: ftst
-	long		tbl_unsupp	- tbl_unsupp
-	long		tbl_unsupp	- tbl_unsupp
-	long		tbl_unsupp	- tbl_unsupp
-	long		tbl_unsupp	- tbl_unsupp
-	long		tbl_unsupp	- tbl_unsupp
-	long		fsin		- tbl_unsupp	# 40: fsmove
-	long		fssqrt		- tbl_unsupp	# 41: fssqrt
-	long		tbl_unsupp	- tbl_unsupp
-	long		tbl_unsupp	- tbl_unsupp
-	long		fdin		- tbl_unsupp	# 44: fdmove
-	long		fdsqrt		- tbl_unsupp	# 45: fdsqrt
-	long		tbl_unsupp	- tbl_unsupp
-	long		tbl_unsupp	- tbl_unsupp
-	long		tbl_unsupp	- tbl_unsupp
-	long		tbl_unsupp	- tbl_unsupp
-	long		tbl_unsupp	- tbl_unsupp
-	long		tbl_unsupp	- tbl_unsupp
-	long		tbl_unsupp	- tbl_unsupp
-	long		tbl_unsupp	- tbl_unsupp
-	long		tbl_unsupp	- tbl_unsupp
-	long		tbl_unsupp	- tbl_unsupp
-	long		tbl_unsupp	- tbl_unsupp
-	long		tbl_unsupp	- tbl_unsupp
-	long		tbl_unsupp	- tbl_unsupp
-	long		tbl_unsupp	- tbl_unsupp
-	long		tbl_unsupp	- tbl_unsupp
-	long		tbl_unsupp	- tbl_unsupp
-	long		tbl_unsupp	- tbl_unsupp
-	long		tbl_unsupp	- tbl_unsupp
-	long		fsabs		- tbl_unsupp	# 58: fsabs
-	long		tbl_unsupp	- tbl_unsupp
-	long		fsneg		- tbl_unsupp	# 5a: fsneg
-	long		tbl_unsupp	- tbl_unsupp
-	long		fdabs		- tbl_unsupp	# 5c: fdabs
-	long		tbl_unsupp	- tbl_unsupp
-	long		fdneg		- tbl_unsupp	# 5e: fdneg
-	long		tbl_unsupp	- tbl_unsupp
-	long		fsdiv		- tbl_unsupp	# 60: fsdiv
-	long		tbl_unsupp	- tbl_unsupp
-	long		fsadd		- tbl_unsupp	# 62: fsadd
-	long		fsmul		- tbl_unsupp	# 63: fsmul
-	long		fddiv		- tbl_unsupp	# 64: fddiv
-	long		tbl_unsupp	- tbl_unsupp
-	long		fdadd		- tbl_unsupp	# 66: fdadd
-	long		fdmul		- tbl_unsupp	# 67: fdmul
-	long		fssub		- tbl_unsupp	# 68: fssub
-	long		tbl_unsupp	- tbl_unsupp
-	long		tbl_unsupp	- tbl_unsupp
-	long		tbl_unsupp	- tbl_unsupp
-	long		fdsub		- tbl_unsupp	# 6c: fdsub
-
-#################################################
-# Add this here so non-fp modules can compile.
-# (smovcr is called from fpsp_inex.)
-	global		smovcr
-smovcr:
-	bra.b		smovcr
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	fmovm_dynamic(): emulate "fmovm" dynamic instruction		#
-#									#
-# XREF ****************************************************************	#
-#	fetch_dreg() - fetch data register				#
-#	{i,d,}mem_read() - fetch data from memory			#
-#	_mem_write() - write data to memory				#
-#	iea_iacc() - instruction memory access error occurred		#
-#	iea_dacc() - data memory access error occurred			#
-#	restore() - restore An index regs if access error occurred	#
-#									#
-# INPUT ***************************************************************	#
-#	None								#
-#									#
-# OUTPUT **************************************************************	#
-#	If instr is "fmovm Dn,-(A7)" from supervisor mode,		#
-#		d0 = size of dump					#
-#		d1 = Dn							#
-#	Else if instruction access error,				#
-#		d0 = FSLW						#
-#	Else if data access error,					#
-#		d0 = FSLW						#
-#		a0 = address of fault					#
-#	Else								#
-#		none.							#
-#									#
-# ALGORITHM ***********************************************************	#
-#	The effective address must be calculated since this is entered	#
-# from an "Unimplemented Effective Address" exception handler. So, we	#
-# have our own fcalc_ea() routine here. If an access error is flagged	#
-# by a _{i,d,}mem_read() call, we must exit through the special		#
-# handler.								#
-#	The data register is determined and its value loaded to get the	#
-# string of FP registers affected. This value is used as an index into	#
-# a lookup table such that we can determine the number of bytes		#
-# involved.								#
-#	If the instruction is "fmovm.x <ea>,Dn", a _mem_read() is used	#
-# to read in all FP values. Again, _mem_read() may fail and require a	#
-# special exit.								#
-#	If the instruction is "fmovm.x DN,<ea>", a _mem_write() is used	#
-# to write all FP values. _mem_write() may also fail.			#
-#	If the instruction is "fmovm.x DN,-(a7)" from supervisor mode,	#
-# then we return the size of the dump and the string to the caller	#
-# so that the move can occur outside of this routine. This special	#
-# case is required so that moves to the system stack are handled	#
-# correctly.								#
-#									#
-# DYNAMIC:								#
-#	fmovm.x	dn, <ea>						#
-#	fmovm.x	<ea>, dn						#
-#									#
-#	      <WORD 1>		      <WORD2>				#
-#	1111 0010 00 |<ea>|	11@& 1000 0$$$ 0000			#
-#									#
-#	& = (0): predecrement addressing mode				#
-#	    (1): postincrement or control addressing mode		#
-#	@ = (0): move listed regs from memory to the FPU		#
-#	    (1): move listed regs from the FPU to memory		#
-#	$$$    : index of data register holding reg select mask		#
-#									#
-# NOTES:								#
-#	If the data register holds a zero, then the			#
-#	instruction is a nop.						#
-#									#
-#########################################################################
-
-	global		fmovm_dynamic
-fmovm_dynamic:
-
-# extract the data register in which the bit string resides...
-	mov.b		1+EXC_EXTWORD(%a6),%d1	# fetch extword
-	andi.w		&0x70,%d1		# extract reg bits
-	lsr.b		&0x4,%d1		# shift into lo bits
-
-# fetch the bit string into d0...
-	bsr.l		fetch_dreg		# fetch reg string
-
-	andi.l		&0x000000ff,%d0		# keep only lo byte
-
-	mov.l		%d0,-(%sp)		# save strg
-	mov.b		(tbl_fmovm_size.w,%pc,%d0),%d0
-	mov.l		%d0,-(%sp)		# save size
-	bsr.l		fmovm_calc_ea		# calculate <ea>
-	mov.l		(%sp)+,%d0		# restore size
-	mov.l		(%sp)+,%d1		# restore strg
-
-# if the bit string is a zero, then the operation is a no-op
-# but, make sure that we've calculated ea and advanced the opword pointer
-	beq.w		fmovm_data_done
-
-# separate move ins from move outs...
-	btst		&0x5,EXC_EXTWORD(%a6)	# is it a move in or out?
-	beq.w		fmovm_data_in		# it's a move out
-
-#############
-# MOVE OUT: #
-#############
-fmovm_data_out:
-	btst		&0x4,EXC_EXTWORD(%a6)	# control or predecrement?
-	bne.w		fmovm_out_ctrl		# control
-
-############################
-fmovm_out_predec:
-# for predecrement mode, the bit string is the opposite of both control
-# operations and postincrement mode. (bit7 = FP7 ... bit0 = FP0)
-# here, we convert it to be just like the others...
-	mov.b		(tbl_fmovm_convert.w,%pc,%d1.w*1),%d1
-
-	btst		&0x5,EXC_SR(%a6)	# user or supervisor mode?
-	beq.b		fmovm_out_ctrl		# user
-
-fmovm_out_predec_s:
-	cmpi.b		SPCOND_FLG(%a6),&mda7_flg # is <ea> mode -(a7)?
-	bne.b		fmovm_out_ctrl
-
-# the operation was unfortunately an: fmovm.x dn,-(sp)
-# called from supervisor mode.
-# we're also passing "size" and "strg" back to the calling routine
-	rts
-
-############################
-fmovm_out_ctrl:
-	mov.l		%a0,%a1			# move <ea> to a1
-
-	sub.l		%d0,%sp			# subtract size of dump
-	lea		(%sp),%a0
-
-	tst.b		%d1			# should FP0 be moved?
-	bpl.b		fmovm_out_ctrl_fp1	# no
-
-	mov.l		0x0+EXC_FP0(%a6),(%a0)+	# yes
-	mov.l		0x4+EXC_FP0(%a6),(%a0)+
-	mov.l		0x8+EXC_FP0(%a6),(%a0)+
-
-fmovm_out_ctrl_fp1:
-	lsl.b		&0x1,%d1		# should FP1 be moved?
-	bpl.b		fmovm_out_ctrl_fp2	# no
-
-	mov.l		0x0+EXC_FP1(%a6),(%a0)+	# yes
-	mov.l		0x4+EXC_FP1(%a6),(%a0)+
-	mov.l		0x8+EXC_FP1(%a6),(%a0)+
-
-fmovm_out_ctrl_fp2:
-	lsl.b		&0x1,%d1		# should FP2 be moved?
-	bpl.b		fmovm_out_ctrl_fp3	# no
-
-	fmovm.x		&0x20,(%a0)		# yes
-	add.l		&0xc,%a0
-
-fmovm_out_ctrl_fp3:
-	lsl.b		&0x1,%d1		# should FP3 be moved?
-	bpl.b		fmovm_out_ctrl_fp4	# no
-
-	fmovm.x		&0x10,(%a0)		# yes
-	add.l		&0xc,%a0
-
-fmovm_out_ctrl_fp4:
-	lsl.b		&0x1,%d1		# should FP4 be moved?
-	bpl.b		fmovm_out_ctrl_fp5	# no
-
-	fmovm.x		&0x08,(%a0)		# yes
-	add.l		&0xc,%a0
-
-fmovm_out_ctrl_fp5:
-	lsl.b		&0x1,%d1		# should FP5 be moved?
-	bpl.b		fmovm_out_ctrl_fp6	# no
-
-	fmovm.x		&0x04,(%a0)		# yes
-	add.l		&0xc,%a0
-
-fmovm_out_ctrl_fp6:
-	lsl.b		&0x1,%d1		# should FP6 be moved?
-	bpl.b		fmovm_out_ctrl_fp7	# no
-
-	fmovm.x		&0x02,(%a0)		# yes
-	add.l		&0xc,%a0
-
-fmovm_out_ctrl_fp7:
-	lsl.b		&0x1,%d1		# should FP7 be moved?
-	bpl.b		fmovm_out_ctrl_done	# no
-
-	fmovm.x		&0x01,(%a0)		# yes
-	add.l		&0xc,%a0
-
-fmovm_out_ctrl_done:
-	mov.l		%a1,L_SCR1(%a6)
-
-	lea		(%sp),%a0		# pass: supervisor src
-	mov.l		%d0,-(%sp)		# save size
-	bsr.l		_dmem_write		# copy data to user mem
-
-	mov.l		(%sp)+,%d0
-	add.l		%d0,%sp			# clear fpreg data from stack
-
-	tst.l		%d1			# did dstore err?
-	bne.w		fmovm_out_err		# yes
-
-	rts
-
-############
-# MOVE IN: #
-############
-fmovm_data_in:
-	mov.l		%a0,L_SCR1(%a6)
-
-	sub.l		%d0,%sp			# make room for fpregs
-	lea		(%sp),%a1
-
-	mov.l		%d1,-(%sp)		# save bit string for later
-	mov.l		%d0,-(%sp)		# save # of bytes
-
-	bsr.l		_dmem_read		# copy data from user mem
-
-	mov.l		(%sp)+,%d0		# retrieve # of bytes
-
-	tst.l		%d1			# did dfetch fail?
-	bne.w		fmovm_in_err		# yes
-
-	mov.l		(%sp)+,%d1		# load bit string
-
-	lea		(%sp),%a0		# addr of stack
-
-	tst.b		%d1			# should FP0 be moved?
-	bpl.b		fmovm_data_in_fp1	# no
-
-	mov.l		(%a0)+,0x0+EXC_FP0(%a6)	# yes
-	mov.l		(%a0)+,0x4+EXC_FP0(%a6)
-	mov.l		(%a0)+,0x8+EXC_FP0(%a6)
-
-fmovm_data_in_fp1:
-	lsl.b		&0x1,%d1		# should FP1 be moved?
-	bpl.b		fmovm_data_in_fp2	# no
-
-	mov.l		(%a0)+,0x0+EXC_FP1(%a6)	# yes
-	mov.l		(%a0)+,0x4+EXC_FP1(%a6)
-	mov.l		(%a0)+,0x8+EXC_FP1(%a6)
-
-fmovm_data_in_fp2:
-	lsl.b		&0x1,%d1		# should FP2 be moved?
-	bpl.b		fmovm_data_in_fp3	# no
-
-	fmovm.x		(%a0)+,&0x20		# yes
-
-fmovm_data_in_fp3:
-	lsl.b		&0x1,%d1		# should FP3 be moved?
-	bpl.b		fmovm_data_in_fp4	# no
-
-	fmovm.x		(%a0)+,&0x10		# yes
-
-fmovm_data_in_fp4:
-	lsl.b		&0x1,%d1		# should FP4 be moved?
-	bpl.b		fmovm_data_in_fp5	# no
-
-	fmovm.x		(%a0)+,&0x08		# yes
-
-fmovm_data_in_fp5:
-	lsl.b		&0x1,%d1		# should FP5 be moved?
-	bpl.b		fmovm_data_in_fp6	# no
-
-	fmovm.x		(%a0)+,&0x04		# yes
-
-fmovm_data_in_fp6:
-	lsl.b		&0x1,%d1		# should FP6 be moved?
-	bpl.b		fmovm_data_in_fp7	# no
-
-	fmovm.x		(%a0)+,&0x02		# yes
-
-fmovm_data_in_fp7:
-	lsl.b		&0x1,%d1		# should FP7 be moved?
-	bpl.b		fmovm_data_in_done	# no
-
-	fmovm.x		(%a0)+,&0x01		# yes
-
-fmovm_data_in_done:
-	add.l		%d0,%sp			# remove fpregs from stack
-	rts
-
-#####################################
-
-fmovm_data_done:
-	rts
-
-##############################################################################
-
-#
-# table indexed by the operation's bit string that gives the number
-# of bytes that will be moved.
-#
-# number of bytes = (# of 1's in bit string) * 12(bytes/fpreg)
-#
-tbl_fmovm_size:
-	byte	0x00,0x0c,0x0c,0x18,0x0c,0x18,0x18,0x24
-	byte	0x0c,0x18,0x18,0x24,0x18,0x24,0x24,0x30
-	byte	0x0c,0x18,0x18,0x24,0x18,0x24,0x24,0x30
-	byte	0x18,0x24,0x24,0x30,0x24,0x30,0x30,0x3c
-	byte	0x0c,0x18,0x18,0x24,0x18,0x24,0x24,0x30
-	byte	0x18,0x24,0x24,0x30,0x24,0x30,0x30,0x3c
-	byte	0x18,0x24,0x24,0x30,0x24,0x30,0x30,0x3c
-	byte	0x24,0x30,0x30,0x3c,0x30,0x3c,0x3c,0x48
-	byte	0x0c,0x18,0x18,0x24,0x18,0x24,0x24,0x30
-	byte	0x18,0x24,0x24,0x30,0x24,0x30,0x30,0x3c
-	byte	0x18,0x24,0x24,0x30,0x24,0x30,0x30,0x3c
-	byte	0x24,0x30,0x30,0x3c,0x30,0x3c,0x3c,0x48
-	byte	0x18,0x24,0x24,0x30,0x24,0x30,0x30,0x3c
-	byte	0x24,0x30,0x30,0x3c,0x30,0x3c,0x3c,0x48
-	byte	0x24,0x30,0x30,0x3c,0x30,0x3c,0x3c,0x48
-	byte	0x30,0x3c,0x3c,0x48,0x3c,0x48,0x48,0x54
-	byte	0x0c,0x18,0x18,0x24,0x18,0x24,0x24,0x30
-	byte	0x18,0x24,0x24,0x30,0x24,0x30,0x30,0x3c
-	byte	0x18,0x24,0x24,0x30,0x24,0x30,0x30,0x3c
-	byte	0x24,0x30,0x30,0x3c,0x30,0x3c,0x3c,0x48
-	byte	0x18,0x24,0x24,0x30,0x24,0x30,0x30,0x3c
-	byte	0x24,0x30,0x30,0x3c,0x30,0x3c,0x3c,0x48
-	byte	0x24,0x30,0x30,0x3c,0x30,0x3c,0x3c,0x48
-	byte	0x30,0x3c,0x3c,0x48,0x3c,0x48,0x48,0x54
-	byte	0x18,0x24,0x24,0x30,0x24,0x30,0x30,0x3c
-	byte	0x24,0x30,0x30,0x3c,0x30,0x3c,0x3c,0x48
-	byte	0x24,0x30,0x30,0x3c,0x30,0x3c,0x3c,0x48
-	byte	0x30,0x3c,0x3c,0x48,0x3c,0x48,0x48,0x54
-	byte	0x24,0x30,0x30,0x3c,0x30,0x3c,0x3c,0x48
-	byte	0x30,0x3c,0x3c,0x48,0x3c,0x48,0x48,0x54
-	byte	0x30,0x3c,0x3c,0x48,0x3c,0x48,0x48,0x54
-	byte	0x3c,0x48,0x48,0x54,0x48,0x54,0x54,0x60
-
-#
-# table to convert a pre-decrement bit string into a post-increment
-# or control bit string.
-# ex:	0x00	==>	0x00
-#	0x01	==>	0x80
-#	0x02	==>	0x40
-#		.
-#		.
-#	0xfd	==>	0xbf
-#	0xfe	==>	0x7f
-#	0xff	==>	0xff
-#
-tbl_fmovm_convert:
-	byte	0x00,0x80,0x40,0xc0,0x20,0xa0,0x60,0xe0
-	byte	0x10,0x90,0x50,0xd0,0x30,0xb0,0x70,0xf0
-	byte	0x08,0x88,0x48,0xc8,0x28,0xa8,0x68,0xe8
-	byte	0x18,0x98,0x58,0xd8,0x38,0xb8,0x78,0xf8
-	byte	0x04,0x84,0x44,0xc4,0x24,0xa4,0x64,0xe4
-	byte	0x14,0x94,0x54,0xd4,0x34,0xb4,0x74,0xf4
-	byte	0x0c,0x8c,0x4c,0xcc,0x2c,0xac,0x6c,0xec
-	byte	0x1c,0x9c,0x5c,0xdc,0x3c,0xbc,0x7c,0xfc
-	byte	0x02,0x82,0x42,0xc2,0x22,0xa2,0x62,0xe2
-	byte	0x12,0x92,0x52,0xd2,0x32,0xb2,0x72,0xf2
-	byte	0x0a,0x8a,0x4a,0xca,0x2a,0xaa,0x6a,0xea
-	byte	0x1a,0x9a,0x5a,0xda,0x3a,0xba,0x7a,0xfa
-	byte	0x06,0x86,0x46,0xc6,0x26,0xa6,0x66,0xe6
-	byte	0x16,0x96,0x56,0xd6,0x36,0xb6,0x76,0xf6
-	byte	0x0e,0x8e,0x4e,0xce,0x2e,0xae,0x6e,0xee
-	byte	0x1e,0x9e,0x5e,0xde,0x3e,0xbe,0x7e,0xfe
-	byte	0x01,0x81,0x41,0xc1,0x21,0xa1,0x61,0xe1
-	byte	0x11,0x91,0x51,0xd1,0x31,0xb1,0x71,0xf1
-	byte	0x09,0x89,0x49,0xc9,0x29,0xa9,0x69,0xe9
-	byte	0x19,0x99,0x59,0xd9,0x39,0xb9,0x79,0xf9
-	byte	0x05,0x85,0x45,0xc5,0x25,0xa5,0x65,0xe5
-	byte	0x15,0x95,0x55,0xd5,0x35,0xb5,0x75,0xf5
-	byte	0x0d,0x8d,0x4d,0xcd,0x2d,0xad,0x6d,0xed
-	byte	0x1d,0x9d,0x5d,0xdd,0x3d,0xbd,0x7d,0xfd
-	byte	0x03,0x83,0x43,0xc3,0x23,0xa3,0x63,0xe3
-	byte	0x13,0x93,0x53,0xd3,0x33,0xb3,0x73,0xf3
-	byte	0x0b,0x8b,0x4b,0xcb,0x2b,0xab,0x6b,0xeb
-	byte	0x1b,0x9b,0x5b,0xdb,0x3b,0xbb,0x7b,0xfb
-	byte	0x07,0x87,0x47,0xc7,0x27,0xa7,0x67,0xe7
-	byte	0x17,0x97,0x57,0xd7,0x37,0xb7,0x77,0xf7
-	byte	0x0f,0x8f,0x4f,0xcf,0x2f,0xaf,0x6f,0xef
-	byte	0x1f,0x9f,0x5f,0xdf,0x3f,0xbf,0x7f,0xff
-
-	global		fmovm_calc_ea
-###############################################
-# _fmovm_calc_ea: calculate effective address #
-###############################################
-fmovm_calc_ea:
-	mov.l		%d0,%a0			# move # bytes to a0
-
-# currently, MODE and REG are taken from the EXC_OPWORD. this could be
-# easily changed if they were inputs passed in registers.
-	mov.w		EXC_OPWORD(%a6),%d0	# fetch opcode word
-	mov.w		%d0,%d1			# make a copy
-
-	andi.w		&0x3f,%d0		# extract mode field
-	andi.l		&0x7,%d1		# extract reg  field
-
-# jump to the corresponding function for each {MODE,REG} pair.
-	mov.w		(tbl_fea_mode.b,%pc,%d0.w*2),%d0 # fetch jmp distance
-	jmp		(tbl_fea_mode.b,%pc,%d0.w*1) # jmp to correct ea mode
-
-	swbeg		&64
-tbl_fea_mode:
-	short		tbl_fea_mode	-	tbl_fea_mode
-	short		tbl_fea_mode	-	tbl_fea_mode
-	short		tbl_fea_mode	-	tbl_fea_mode
-	short		tbl_fea_mode	-	tbl_fea_mode
-	short		tbl_fea_mode	-	tbl_fea_mode
-	short		tbl_fea_mode	-	tbl_fea_mode
-	short		tbl_fea_mode	-	tbl_fea_mode
-	short		tbl_fea_mode	-	tbl_fea_mode
-
-	short		tbl_fea_mode	-	tbl_fea_mode
-	short		tbl_fea_mode	-	tbl_fea_mode
-	short		tbl_fea_mode	-	tbl_fea_mode
-	short		tbl_fea_mode	-	tbl_fea_mode
-	short		tbl_fea_mode	-	tbl_fea_mode
-	short		tbl_fea_mode	-	tbl_fea_mode
-	short		tbl_fea_mode	-	tbl_fea_mode
-	short		tbl_fea_mode	-	tbl_fea_mode
-
-	short		faddr_ind_a0	-	tbl_fea_mode
-	short		faddr_ind_a1	-	tbl_fea_mode
-	short		faddr_ind_a2	-	tbl_fea_mode
-	short		faddr_ind_a3	-	tbl_fea_mode
-	short		faddr_ind_a4	-	tbl_fea_mode
-	short		faddr_ind_a5	-	tbl_fea_mode
-	short		faddr_ind_a6	-	tbl_fea_mode
-	short		faddr_ind_a7	-	tbl_fea_mode
-
-	short		faddr_ind_p_a0	-	tbl_fea_mode
-	short		faddr_ind_p_a1	-	tbl_fea_mode
-	short		faddr_ind_p_a2	-	tbl_fea_mode
-	short		faddr_ind_p_a3	-	tbl_fea_mode
-	short		faddr_ind_p_a4	-	tbl_fea_mode
-	short		faddr_ind_p_a5	-	tbl_fea_mode
-	short		faddr_ind_p_a6	-	tbl_fea_mode
-	short		faddr_ind_p_a7	-	tbl_fea_mode
-
-	short		faddr_ind_m_a0	-	tbl_fea_mode
-	short		faddr_ind_m_a1	-	tbl_fea_mode
-	short		faddr_ind_m_a2	-	tbl_fea_mode
-	short		faddr_ind_m_a3	-	tbl_fea_mode
-	short		faddr_ind_m_a4	-	tbl_fea_mode
-	short		faddr_ind_m_a5	-	tbl_fea_mode
-	short		faddr_ind_m_a6	-	tbl_fea_mode
-	short		faddr_ind_m_a7	-	tbl_fea_mode
-
-	short		faddr_ind_disp_a0	-	tbl_fea_mode
-	short		faddr_ind_disp_a1	-	tbl_fea_mode
-	short		faddr_ind_disp_a2	-	tbl_fea_mode
-	short		faddr_ind_disp_a3	-	tbl_fea_mode
-	short		faddr_ind_disp_a4	-	tbl_fea_mode
-	short		faddr_ind_disp_a5	-	tbl_fea_mode
-	short		faddr_ind_disp_a6	-	tbl_fea_mode
-	short		faddr_ind_disp_a7	-	tbl_fea_mode
-
-	short		faddr_ind_ext	-	tbl_fea_mode
-	short		faddr_ind_ext	-	tbl_fea_mode
-	short		faddr_ind_ext	-	tbl_fea_mode
-	short		faddr_ind_ext	-	tbl_fea_mode
-	short		faddr_ind_ext	-	tbl_fea_mode
-	short		faddr_ind_ext	-	tbl_fea_mode
-	short		faddr_ind_ext	-	tbl_fea_mode
-	short		faddr_ind_ext	-	tbl_fea_mode
-
-	short		fabs_short	-	tbl_fea_mode
-	short		fabs_long	-	tbl_fea_mode
-	short		fpc_ind		-	tbl_fea_mode
-	short		fpc_ind_ext	-	tbl_fea_mode
-	short		tbl_fea_mode	-	tbl_fea_mode
-	short		tbl_fea_mode	-	tbl_fea_mode
-	short		tbl_fea_mode	-	tbl_fea_mode
-	short		tbl_fea_mode	-	tbl_fea_mode
-
-###################################
-# Address register indirect: (An) #
-###################################
-faddr_ind_a0:
-	mov.l		EXC_DREGS+0x8(%a6),%a0	# Get current a0
-	rts
-
-faddr_ind_a1:
-	mov.l		EXC_DREGS+0xc(%a6),%a0	# Get current a1
-	rts
-
-faddr_ind_a2:
-	mov.l		%a2,%a0			# Get current a2
-	rts
-
-faddr_ind_a3:
-	mov.l		%a3,%a0			# Get current a3
-	rts
-
-faddr_ind_a4:
-	mov.l		%a4,%a0			# Get current a4
-	rts
-
-faddr_ind_a5:
-	mov.l		%a5,%a0			# Get current a5
-	rts
-
-faddr_ind_a6:
-	mov.l		(%a6),%a0		# Get current a6
-	rts
-
-faddr_ind_a7:
-	mov.l		EXC_A7(%a6),%a0		# Get current a7
-	rts
-
-#####################################################
-# Address register indirect w/ postincrement: (An)+ #
-#####################################################
-faddr_ind_p_a0:
-	mov.l		EXC_DREGS+0x8(%a6),%d0	# Get current a0
-	mov.l		%d0,%d1
-	add.l		%a0,%d1			# Increment
-	mov.l		%d1,EXC_DREGS+0x8(%a6)	# Save incr value
-	mov.l		%d0,%a0
-	rts
-
-faddr_ind_p_a1:
-	mov.l		EXC_DREGS+0xc(%a6),%d0	# Get current a1
-	mov.l		%d0,%d1
-	add.l		%a0,%d1			# Increment
-	mov.l		%d1,EXC_DREGS+0xc(%a6)	# Save incr value
-	mov.l		%d0,%a0
-	rts
-
-faddr_ind_p_a2:
-	mov.l		%a2,%d0			# Get current a2
-	mov.l		%d0,%d1
-	add.l		%a0,%d1			# Increment
-	mov.l		%d1,%a2			# Save incr value
-	mov.l		%d0,%a0
-	rts
-
-faddr_ind_p_a3:
-	mov.l		%a3,%d0			# Get current a3
-	mov.l		%d0,%d1
-	add.l		%a0,%d1			# Increment
-	mov.l		%d1,%a3			# Save incr value
-	mov.l		%d0,%a0
-	rts
-
-faddr_ind_p_a4:
-	mov.l		%a4,%d0			# Get current a4
-	mov.l		%d0,%d1
-	add.l		%a0,%d1			# Increment
-	mov.l		%d1,%a4			# Save incr value
-	mov.l		%d0,%a0
-	rts
-
-faddr_ind_p_a5:
-	mov.l		%a5,%d0			# Get current a5
-	mov.l		%d0,%d1
-	add.l		%a0,%d1			# Increment
-	mov.l		%d1,%a5			# Save incr value
-	mov.l		%d0,%a0
-	rts
-
-faddr_ind_p_a6:
-	mov.l		(%a6),%d0		# Get current a6
-	mov.l		%d0,%d1
-	add.l		%a0,%d1			# Increment
-	mov.l		%d1,(%a6)		# Save incr value
-	mov.l		%d0,%a0
-	rts
-
-faddr_ind_p_a7:
-	mov.b		&mia7_flg,SPCOND_FLG(%a6) # set "special case" flag
-
-	mov.l		EXC_A7(%a6),%d0		# Get current a7
-	mov.l		%d0,%d1
-	add.l		%a0,%d1			# Increment
-	mov.l		%d1,EXC_A7(%a6)		# Save incr value
-	mov.l		%d0,%a0
-	rts
-
-####################################################
-# Address register indirect w/ predecrement: -(An) #
-####################################################
-faddr_ind_m_a0:
-	mov.l		EXC_DREGS+0x8(%a6),%d0	# Get current a0
-	sub.l		%a0,%d0			# Decrement
-	mov.l		%d0,EXC_DREGS+0x8(%a6)	# Save decr value
-	mov.l		%d0,%a0
-	rts
-
-faddr_ind_m_a1:
-	mov.l		EXC_DREGS+0xc(%a6),%d0	# Get current a1
-	sub.l		%a0,%d0			# Decrement
-	mov.l		%d0,EXC_DREGS+0xc(%a6)	# Save decr value
-	mov.l		%d0,%a0
-	rts
-
-faddr_ind_m_a2:
-	mov.l		%a2,%d0			# Get current a2
-	sub.l		%a0,%d0			# Decrement
-	mov.l		%d0,%a2			# Save decr value
-	mov.l		%d0,%a0
-	rts
-
-faddr_ind_m_a3:
-	mov.l		%a3,%d0			# Get current a3
-	sub.l		%a0,%d0			# Decrement
-	mov.l		%d0,%a3			# Save decr value
-	mov.l		%d0,%a0
-	rts
-
-faddr_ind_m_a4:
-	mov.l		%a4,%d0			# Get current a4
-	sub.l		%a0,%d0			# Decrement
-	mov.l		%d0,%a4			# Save decr value
-	mov.l		%d0,%a0
-	rts
-
-faddr_ind_m_a5:
-	mov.l		%a5,%d0			# Get current a5
-	sub.l		%a0,%d0			# Decrement
-	mov.l		%d0,%a5			# Save decr value
-	mov.l		%d0,%a0
-	rts
-
-faddr_ind_m_a6:
-	mov.l		(%a6),%d0		# Get current a6
-	sub.l		%a0,%d0			# Decrement
-	mov.l		%d0,(%a6)		# Save decr value
-	mov.l		%d0,%a0
-	rts
-
-faddr_ind_m_a7:
-	mov.b		&mda7_flg,SPCOND_FLG(%a6) # set "special case" flag
-
-	mov.l		EXC_A7(%a6),%d0		# Get current a7
-	sub.l		%a0,%d0			# Decrement
-	mov.l		%d0,EXC_A7(%a6)		# Save decr value
-	mov.l		%d0,%a0
-	rts
-
-########################################################
-# Address register indirect w/ displacement: (d16, An) #
-########################################################
-faddr_ind_disp_a0:
-	mov.l		EXC_EXTWPTR(%a6),%a0	# fetch instruction addr
-	addq.l		&0x2,EXC_EXTWPTR(%a6)	# incr instruction ptr
-	bsr.l		_imem_read_word
-
-	tst.l		%d1			# did ifetch fail?
-	bne.l		iea_iacc		# yes
-
-	mov.w		%d0,%a0			# sign extend displacement
-
-	add.l		EXC_DREGS+0x8(%a6),%a0	# a0 + d16
-	rts
-
-faddr_ind_disp_a1:
-	mov.l		EXC_EXTWPTR(%a6),%a0	# fetch instruction addr
-	addq.l		&0x2,EXC_EXTWPTR(%a6)	# incr instruction ptr
-	bsr.l		_imem_read_word
-
-	tst.l		%d1			# did ifetch fail?
-	bne.l		iea_iacc		# yes
-
-	mov.w		%d0,%a0			# sign extend displacement
-
-	add.l		EXC_DREGS+0xc(%a6),%a0	# a1 + d16
-	rts
-
-faddr_ind_disp_a2:
-	mov.l		EXC_EXTWPTR(%a6),%a0	# fetch instruction addr
-	addq.l		&0x2,EXC_EXTWPTR(%a6)	# incr instruction ptr
-	bsr.l		_imem_read_word
-
-	tst.l		%d1			# did ifetch fail?
-	bne.l		iea_iacc		# yes
-
-	mov.w		%d0,%a0			# sign extend displacement
-
-	add.l		%a2,%a0			# a2 + d16
-	rts
-
-faddr_ind_disp_a3:
-	mov.l		EXC_EXTWPTR(%a6),%a0	# fetch instruction addr
-	addq.l		&0x2,EXC_EXTWPTR(%a6)	# incr instruction ptr
-	bsr.l		_imem_read_word
-
-	tst.l		%d1			# did ifetch fail?
-	bne.l		iea_iacc		# yes
-
-	mov.w		%d0,%a0			# sign extend displacement
-
-	add.l		%a3,%a0			# a3 + d16
-	rts
-
-faddr_ind_disp_a4:
-	mov.l		EXC_EXTWPTR(%a6),%a0	# fetch instruction addr
-	addq.l		&0x2,EXC_EXTWPTR(%a6)	# incr instruction ptr
-	bsr.l		_imem_read_word
-
-	tst.l		%d1			# did ifetch fail?
-	bne.l		iea_iacc		# yes
-
-	mov.w		%d0,%a0			# sign extend displacement
-
-	add.l		%a4,%a0			# a4 + d16
-	rts
-
-faddr_ind_disp_a5:
-	mov.l		EXC_EXTWPTR(%a6),%a0	# fetch instruction addr
-	addq.l		&0x2,EXC_EXTWPTR(%a6)	# incr instruction ptr
-	bsr.l		_imem_read_word
-
-	tst.l		%d1			# did ifetch fail?
-	bne.l		iea_iacc		# yes
-
-	mov.w		%d0,%a0			# sign extend displacement
-
-	add.l		%a5,%a0			# a5 + d16
-	rts
-
-faddr_ind_disp_a6:
-	mov.l		EXC_EXTWPTR(%a6),%a0	# fetch instruction addr
-	addq.l		&0x2,EXC_EXTWPTR(%a6)	# incr instruction ptr
-	bsr.l		_imem_read_word
-
-	tst.l		%d1			# did ifetch fail?
-	bne.l		iea_iacc		# yes
-
-	mov.w		%d0,%a0			# sign extend displacement
-
-	add.l		(%a6),%a0		# a6 + d16
-	rts
-
-faddr_ind_disp_a7:
-	mov.l		EXC_EXTWPTR(%a6),%a0	# fetch instruction addr
-	addq.l		&0x2,EXC_EXTWPTR(%a6)	# incr instruction ptr
-	bsr.l		_imem_read_word
-
-	tst.l		%d1			# did ifetch fail?
-	bne.l		iea_iacc		# yes
-
-	mov.w		%d0,%a0			# sign extend displacement
-
-	add.l		EXC_A7(%a6),%a0		# a7 + d16
-	rts
-
-########################################################################
-# Address register indirect w/ index(8-bit displacement): (d8, An, Xn) #
-#    "       "         "    w/   "  (base displacement): (bd, An, Xn)  #
-# Memory indirect postindexed: ([bd, An], Xn, od)		       #
-# Memory indirect preindexed: ([bd, An, Xn], od)		       #
-########################################################################
-faddr_ind_ext:
-	addq.l		&0x8,%d1
-	bsr.l		fetch_dreg		# fetch base areg
-	mov.l		%d0,-(%sp)
-
-	mov.l		EXC_EXTWPTR(%a6),%a0	# fetch instruction addr
-	addq.l		&0x2,EXC_EXTWPTR(%a6)	# incr instruction ptr
-	bsr.l		_imem_read_word		# fetch extword in d0
-
-	tst.l		%d1			# did ifetch fail?
-	bne.l		iea_iacc		# yes
-
-	mov.l		(%sp)+,%a0
-
-	btst		&0x8,%d0
-	bne.w		fcalc_mem_ind
-
-	mov.l		%d0,L_SCR1(%a6)		# hold opword
-
-	mov.l		%d0,%d1
-	rol.w		&0x4,%d1
-	andi.w		&0xf,%d1		# extract index regno
-
-# count on fetch_dreg() not to alter a0...
-	bsr.l		fetch_dreg		# fetch index
-
-	mov.l		%d2,-(%sp)		# save d2
-	mov.l		L_SCR1(%a6),%d2		# fetch opword
-
-	btst		&0xb,%d2		# is it word or long?
-	bne.b		faii8_long
-	ext.l		%d0			# sign extend word index
-faii8_long:
-	mov.l		%d2,%d1
-	rol.w		&0x7,%d1
-	andi.l		&0x3,%d1		# extract scale value
-
-	lsl.l		%d1,%d0			# shift index by scale
-
-	extb.l		%d2			# sign extend displacement
-	add.l		%d2,%d0			# index + disp
-	add.l		%d0,%a0			# An + (index + disp)
-
-	mov.l		(%sp)+,%d2		# restore old d2
-	rts
-
-###########################
-# Absolute short: (XXX).W #
-###########################
-fabs_short:
-	mov.l		EXC_EXTWPTR(%a6),%a0	# fetch instruction addr
-	addq.l		&0x2,EXC_EXTWPTR(%a6)	# incr instruction ptr
-	bsr.l		_imem_read_word		# fetch short address
-
-	tst.l		%d1			# did ifetch fail?
-	bne.l		iea_iacc		# yes
-
-	mov.w		%d0,%a0			# return <ea> in a0
-	rts
-
-##########################
-# Absolute long: (XXX).L #
-##########################
-fabs_long:
-	mov.l		EXC_EXTWPTR(%a6),%a0	# fetch instruction addr
-	addq.l		&0x4,EXC_EXTWPTR(%a6)	# incr instruction ptr
-	bsr.l		_imem_read_long		# fetch long address
-
-	tst.l		%d1			# did ifetch fail?
-	bne.l		iea_iacc		# yes
-
-	mov.l		%d0,%a0			# return <ea> in a0
-	rts
-
-#######################################################
-# Program counter indirect w/ displacement: (d16, PC) #
-#######################################################
-fpc_ind:
-	mov.l		EXC_EXTWPTR(%a6),%a0	# fetch instruction addr
-	addq.l		&0x2,EXC_EXTWPTR(%a6)	# incr instruction ptr
-	bsr.l		_imem_read_word		# fetch word displacement
-
-	tst.l		%d1			# did ifetch fail?
-	bne.l		iea_iacc		# yes
-
-	mov.w		%d0,%a0			# sign extend displacement
-
-	add.l		EXC_EXTWPTR(%a6),%a0	# pc + d16
-
-# _imem_read_word() increased the extwptr by 2. need to adjust here.
-	subq.l		&0x2,%a0		# adjust <ea>
-	rts
-
-##########################################################
-# PC indirect w/ index(8-bit displacement): (d8, PC, An) #
-# "     "     w/   "  (base displacement): (bd, PC, An)  #
-# PC memory indirect postindexed: ([bd, PC], Xn, od)     #
-# PC memory indirect preindexed: ([bd, PC, Xn], od)      #
-##########################################################
-fpc_ind_ext:
-	mov.l		EXC_EXTWPTR(%a6),%a0	# fetch instruction addr
-	addq.l		&0x2,EXC_EXTWPTR(%a6)	# incr instruction ptr
-	bsr.l		_imem_read_word		# fetch ext word
-
-	tst.l		%d1			# did ifetch fail?
-	bne.l		iea_iacc		# yes
-
-	mov.l		EXC_EXTWPTR(%a6),%a0	# put base in a0
-	subq.l		&0x2,%a0		# adjust base
-
-	btst		&0x8,%d0		# is disp only 8 bits?
-	bne.w		fcalc_mem_ind		# calc memory indirect
-
-	mov.l		%d0,L_SCR1(%a6)		# store opword
-
-	mov.l		%d0,%d1			# make extword copy
-	rol.w		&0x4,%d1		# rotate reg num into place
-	andi.w		&0xf,%d1		# extract register number
-
-# count on fetch_dreg() not to alter a0...
-	bsr.l		fetch_dreg		# fetch index
-
-	mov.l		%d2,-(%sp)		# save d2
-	mov.l		L_SCR1(%a6),%d2		# fetch opword
-
-	btst		&0xb,%d2		# is index word or long?
-	bne.b		fpii8_long		# long
-	ext.l		%d0			# sign extend word index
-fpii8_long:
-	mov.l		%d2,%d1
-	rol.w		&0x7,%d1		# rotate scale value into place
-	andi.l		&0x3,%d1		# extract scale value
-
-	lsl.l		%d1,%d0			# shift index by scale
-
-	extb.l		%d2			# sign extend displacement
-	add.l		%d2,%d0			# disp + index
-	add.l		%d0,%a0			# An + (index + disp)
-
-	mov.l		(%sp)+,%d2		# restore temp register
-	rts
-
-# d2 = index
-# d3 = base
-# d4 = od
-# d5 = extword
-fcalc_mem_ind:
-	btst		&0x6,%d0		# is the index suppressed?
-	beq.b		fcalc_index
-
-	movm.l		&0x3c00,-(%sp)		# save d2-d5
-
-	mov.l		%d0,%d5			# put extword in d5
-	mov.l		%a0,%d3			# put base in d3
-
-	clr.l		%d2			# yes, so index = 0
-	bra.b		fbase_supp_ck
-
-# index:
-fcalc_index:
-	mov.l		%d0,L_SCR1(%a6)		# save d0 (opword)
-	bfextu		%d0{&16:&4},%d1		# fetch dreg index
-	bsr.l		fetch_dreg
-
-	movm.l		&0x3c00,-(%sp)		# save d2-d5
-	mov.l		%d0,%d2			# put index in d2
-	mov.l		L_SCR1(%a6),%d5
-	mov.l		%a0,%d3
-
-	btst		&0xb,%d5		# is index word or long?
-	bne.b		fno_ext
-	ext.l		%d2
-
-fno_ext:
-	bfextu		%d5{&21:&2},%d0
-	lsl.l		%d0,%d2
-
-# base address (passed as parameter in d3):
-# we clear the value here if it should actually be suppressed.
-fbase_supp_ck:
-	btst		&0x7,%d5		# is the bd suppressed?
-	beq.b		fno_base_sup
-	clr.l		%d3
-
-# base displacement:
-fno_base_sup:
-	bfextu		%d5{&26:&2},%d0		# get bd size
-#	beq.l		fmovm_error		# if (size == 0) it's reserved
-
-	cmpi.b		%d0,&0x2
-	blt.b		fno_bd
-	beq.b		fget_word_bd
-
-	mov.l		EXC_EXTWPTR(%a6),%a0	# fetch instruction addr
-	addq.l		&0x4,EXC_EXTWPTR(%a6)	# incr instruction ptr
-	bsr.l		_imem_read_long
-
-	tst.l		%d1			# did ifetch fail?
-	bne.l		fcea_iacc		# yes
-
-	bra.b		fchk_ind
-
-fget_word_bd:
-	mov.l		EXC_EXTWPTR(%a6),%a0	# fetch instruction addr
-	addq.l		&0x2,EXC_EXTWPTR(%a6)	# incr instruction ptr
-	bsr.l		_imem_read_word
-
-	tst.l		%d1			# did ifetch fail?
-	bne.l		fcea_iacc		# yes
-
-	ext.l		%d0			# sign extend bd
-
-fchk_ind:
-	add.l		%d0,%d3			# base += bd
-
-# outer displacement:
-fno_bd:
-	bfextu		%d5{&30:&2},%d0		# is od suppressed?
-	beq.w		faii_bd
-
-	cmpi.b		%d0,&0x2
-	blt.b		fnull_od
-	beq.b		fword_od
-
-	mov.l		EXC_EXTWPTR(%a6),%a0	# fetch instruction addr
-	addq.l		&0x4,EXC_EXTWPTR(%a6)	# incr instruction ptr
-	bsr.l		_imem_read_long
-
-	tst.l		%d1			# did ifetch fail?
-	bne.l		fcea_iacc		# yes
-
-	bra.b		fadd_them
-
-fword_od:
-	mov.l		EXC_EXTWPTR(%a6),%a0	# fetch instruction addr
-	addq.l		&0x2,EXC_EXTWPTR(%a6)	# incr instruction ptr
-	bsr.l		_imem_read_word
-
-	tst.l		%d1			# did ifetch fail?
-	bne.l		fcea_iacc		# yes
-
-	ext.l		%d0			# sign extend od
-	bra.b		fadd_them
-
-fnull_od:
-	clr.l		%d0
-
-fadd_them:
-	mov.l		%d0,%d4
-
-	btst		&0x2,%d5		# pre or post indexing?
-	beq.b		fpre_indexed
-
-	mov.l		%d3,%a0
-	bsr.l		_dmem_read_long
-
-	tst.l		%d1			# did dfetch fail?
-	bne.w		fcea_err		# yes
-
-	add.l		%d2,%d0			# <ea> += index
-	add.l		%d4,%d0			# <ea> += od
-	bra.b		fdone_ea
-
-fpre_indexed:
-	add.l		%d2,%d3			# preindexing
-	mov.l		%d3,%a0
-	bsr.l		_dmem_read_long
-
-	tst.l		%d1			# did dfetch fail?
-	bne.w		fcea_err		# yes
-
-	add.l		%d4,%d0			# ea += od
-	bra.b		fdone_ea
-
-faii_bd:
-	add.l		%d2,%d3			# ea = (base + bd) + index
-	mov.l		%d3,%d0
-fdone_ea:
-	mov.l		%d0,%a0
-
-	movm.l		(%sp)+,&0x003c		# restore d2-d5
-	rts
-
-#########################################################
-fcea_err:
-	mov.l		%d3,%a0
-
-	movm.l		(%sp)+,&0x003c		# restore d2-d5
-	mov.w		&0x0101,%d0
-	bra.l		iea_dacc
-
-fcea_iacc:
-	movm.l		(%sp)+,&0x003c		# restore d2-d5
-	bra.l		iea_iacc
-
-fmovm_out_err:
-	bsr.l		restore
-	mov.w		&0x00e1,%d0
-	bra.b		fmovm_err
-
-fmovm_in_err:
-	bsr.l		restore
-	mov.w		&0x0161,%d0
-
-fmovm_err:
-	mov.l		L_SCR1(%a6),%a0
-	bra.l		iea_dacc
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	fmovm_ctrl(): emulate fmovm.l of control registers instr	#
-#									#
-# XREF ****************************************************************	#
-#	_imem_read_long() - read longword from memory			#
-#	iea_iacc() - _imem_read_long() failed; error recovery		#
-#									#
-# INPUT ***************************************************************	#
-#	None								#
-#									#
-# OUTPUT **************************************************************	#
-#	If _imem_read_long() doesn't fail:				#
-#		USER_FPCR(a6)  = new FPCR value				#
-#		USER_FPSR(a6)  = new FPSR value				#
-#		USER_FPIAR(a6) = new FPIAR value			#
-#									#
-# ALGORITHM ***********************************************************	#
-#	Decode the instruction type by looking at the extension word	#
-# in order to see how many control registers to fetch from memory.	#
-# Fetch them using _imem_read_long(). If this fetch fails, exit through	#
-# the special access error exit handler iea_iacc().			#
-#									#
-# Instruction word decoding:						#
-#									#
-#	fmovem.l #<data>, {FPIAR&|FPCR&|FPSR}				#
-#									#
-#		WORD1			WORD2				#
-#	1111 0010 00 111100	100$ $$00 0000 0000			#
-#									#
-#	$$$ (100): FPCR							#
-#	    (010): FPSR							#
-#	    (001): FPIAR						#
-#	    (000): FPIAR						#
-#									#
-#########################################################################
-
-	global		fmovm_ctrl
-fmovm_ctrl:
-	mov.b		EXC_EXTWORD(%a6),%d0	# fetch reg select bits
-	cmpi.b		%d0,&0x9c		# fpcr & fpsr & fpiar ?
-	beq.w		fctrl_in_7		# yes
-	cmpi.b		%d0,&0x98		# fpcr & fpsr ?
-	beq.w		fctrl_in_6		# yes
-	cmpi.b		%d0,&0x94		# fpcr & fpiar ?
-	beq.b		fctrl_in_5		# yes
-
-# fmovem.l #<data>, fpsr/fpiar
-fctrl_in_3:
-	mov.l		EXC_EXTWPTR(%a6),%a0	# fetch instruction addr
-	addq.l		&0x4,EXC_EXTWPTR(%a6)	# incr instruction ptr
-	bsr.l		_imem_read_long		# fetch FPSR from mem
-
-	tst.l		%d1			# did ifetch fail?
-	bne.l		iea_iacc		# yes
-
-	mov.l		%d0,USER_FPSR(%a6)	# store new FPSR to stack
-	mov.l		EXC_EXTWPTR(%a6),%a0	# fetch instruction addr
-	addq.l		&0x4,EXC_EXTWPTR(%a6)	# incr instruction ptr
-	bsr.l		_imem_read_long		# fetch FPIAR from mem
-
-	tst.l		%d1			# did ifetch fail?
-	bne.l		iea_iacc		# yes
-
-	mov.l		%d0,USER_FPIAR(%a6)	# store new FPIAR to stack
-	rts
-
-# fmovem.l #<data>, fpcr/fpiar
-fctrl_in_5:
-	mov.l		EXC_EXTWPTR(%a6),%a0	# fetch instruction addr
-	addq.l		&0x4,EXC_EXTWPTR(%a6)	# incr instruction ptr
-	bsr.l		_imem_read_long		# fetch FPCR from mem
-
-	tst.l		%d1			# did ifetch fail?
-	bne.l		iea_iacc		# yes
-
-	mov.l		%d0,USER_FPCR(%a6)	# store new FPCR to stack
-	mov.l		EXC_EXTWPTR(%a6),%a0	# fetch instruction addr
-	addq.l		&0x4,EXC_EXTWPTR(%a6)	# incr instruction ptr
-	bsr.l		_imem_read_long		# fetch FPIAR from mem
-
-	tst.l		%d1			# did ifetch fail?
-	bne.l		iea_iacc		# yes
-
-	mov.l		%d0,USER_FPIAR(%a6)	# store new FPIAR to stack
-	rts
-
-# fmovem.l #<data>, fpcr/fpsr
-fctrl_in_6:
-	mov.l		EXC_EXTWPTR(%a6),%a0	# fetch instruction addr
-	addq.l		&0x4,EXC_EXTWPTR(%a6)	# incr instruction ptr
-	bsr.l		_imem_read_long		# fetch FPCR from mem
-
-	tst.l		%d1			# did ifetch fail?
-	bne.l		iea_iacc		# yes
-
-	mov.l		%d0,USER_FPCR(%a6)	# store new FPCR to mem
-	mov.l		EXC_EXTWPTR(%a6),%a0	# fetch instruction addr
-	addq.l		&0x4,EXC_EXTWPTR(%a6)	# incr instruction ptr
-	bsr.l		_imem_read_long		# fetch FPSR from mem
-
-	tst.l		%d1			# did ifetch fail?
-	bne.l		iea_iacc		# yes
-
-	mov.l		%d0,USER_FPSR(%a6)	# store new FPSR to mem
-	rts
-
-# fmovem.l #<data>, fpcr/fpsr/fpiar
-fctrl_in_7:
-	mov.l		EXC_EXTWPTR(%a6),%a0	# fetch instruction addr
-	addq.l		&0x4,EXC_EXTWPTR(%a6)	# incr instruction ptr
-	bsr.l		_imem_read_long		# fetch FPCR from mem
-
-	tst.l		%d1			# did ifetch fail?
-	bne.l		iea_iacc		# yes
-
-	mov.l		%d0,USER_FPCR(%a6)	# store new FPCR to mem
-	mov.l		EXC_EXTWPTR(%a6),%a0	# fetch instruction addr
-	addq.l		&0x4,EXC_EXTWPTR(%a6)	# incr instruction ptr
-	bsr.l		_imem_read_long		# fetch FPSR from mem
-
-	tst.l		%d1			# did ifetch fail?
-	bne.l		iea_iacc		# yes
-
-	mov.l		%d0,USER_FPSR(%a6)	# store new FPSR to mem
-	mov.l		EXC_EXTWPTR(%a6),%a0	# fetch instruction addr
-	addq.l		&0x4,EXC_EXTWPTR(%a6)	# incr instruction ptr
-	bsr.l		_imem_read_long		# fetch FPIAR from mem
-
-	tst.l		%d1			# did ifetch fail?
-	bne.l		iea_iacc		# yes
-
-	mov.l		%d0,USER_FPIAR(%a6)	# store new FPIAR to mem
-	rts
-
-##########################################################################
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	addsub_scaler2(): scale inputs to fadd/fsub such that no	#
-#			  OVFL/UNFL exceptions will result		#
-#									#
-# XREF ****************************************************************	#
-#	norm() - normalize mantissa after adjusting exponent		#
-#									#
-# INPUT ***************************************************************	#
-#	FP_SRC(a6) = fp op1(src)					#
-#	FP_DST(a6) = fp op2(dst)					#
-#									#
-# OUTPUT **************************************************************	#
-#	FP_SRC(a6) = fp op1 scaled(src)					#
-#	FP_DST(a6) = fp op2 scaled(dst)					#
-#	d0         = scale amount					#
-#									#
-# ALGORITHM ***********************************************************	#
-#	If the DST exponent is > the SRC exponent, set the DST exponent	#
-# equal to 0x3fff and scale the SRC exponent by the value that the	#
-# DST exponent was scaled by. If the SRC exponent is greater or equal,	#
-# do the opposite. Return this scale factor in d0.			#
-#	If the two exponents differ by > the number of mantissa bits	#
-# plus two, then set the smallest exponent to a very small value as a	#
-# quick shortcut.							#
-#									#
-#########################################################################
-
-	global		addsub_scaler2
-addsub_scaler2:
-	mov.l		SRC_HI(%a0),FP_SCR0_HI(%a6)
-	mov.l		DST_HI(%a1),FP_SCR1_HI(%a6)
-	mov.l		SRC_LO(%a0),FP_SCR0_LO(%a6)
-	mov.l		DST_LO(%a1),FP_SCR1_LO(%a6)
-	mov.w		SRC_EX(%a0),%d0
-	mov.w		DST_EX(%a1),%d1
-	mov.w		%d0,FP_SCR0_EX(%a6)
-	mov.w		%d1,FP_SCR1_EX(%a6)
-
-	andi.w		&0x7fff,%d0
-	andi.w		&0x7fff,%d1
-	mov.w		%d0,L_SCR1(%a6)		# store src exponent
-	mov.w		%d1,2+L_SCR1(%a6)	# store dst exponent
-
-	cmp.w		%d0, %d1		# is src exp >= dst exp?
-	bge.l		src_exp_ge2
-
-# dst exp is >  src exp; scale dst to exp = 0x3fff
-dst_exp_gt2:
-	bsr.l		scale_to_zero_dst
-	mov.l		%d0,-(%sp)		# save scale factor
-
-	cmpi.b		STAG(%a6),&DENORM	# is dst denormalized?
-	bne.b		cmpexp12
-
-	lea		FP_SCR0(%a6),%a0
-	bsr.l		norm			# normalize the denorm; result is new exp
-	neg.w		%d0			# new exp = -(shft val)
-	mov.w		%d0,L_SCR1(%a6)		# inset new exp
-
-cmpexp12:
-	mov.w		2+L_SCR1(%a6),%d0
-	subi.w		&mantissalen+2,%d0	# subtract mantissalen+2 from larger exp
-
-	cmp.w		%d0,L_SCR1(%a6)		# is difference >= len(mantissa)+2?
-	bge.b		quick_scale12
-
-	mov.w		L_SCR1(%a6),%d0
-	add.w		0x2(%sp),%d0		# scale src exponent by scale factor
-	mov.w		FP_SCR0_EX(%a6),%d1
-	and.w		&0x8000,%d1
-	or.w		%d1,%d0			# concat {sgn,new exp}
-	mov.w		%d0,FP_SCR0_EX(%a6)	# insert new dst exponent
-
-	mov.l		(%sp)+,%d0		# return SCALE factor
-	rts
-
-quick_scale12:
-	andi.w		&0x8000,FP_SCR0_EX(%a6)	# zero src exponent
-	bset		&0x0,1+FP_SCR0_EX(%a6)	# set exp = 1
-
-	mov.l		(%sp)+,%d0		# return SCALE factor
-	rts
-
-# src exp is >= dst exp; scale src to exp = 0x3fff
-src_exp_ge2:
-	bsr.l		scale_to_zero_src
-	mov.l		%d0,-(%sp)		# save scale factor
-
-	cmpi.b		DTAG(%a6),&DENORM	# is dst denormalized?
-	bne.b		cmpexp22
-	lea		FP_SCR1(%a6),%a0
-	bsr.l		norm			# normalize the denorm; result is new exp
-	neg.w		%d0			# new exp = -(shft val)
-	mov.w		%d0,2+L_SCR1(%a6)	# inset new exp
-
-cmpexp22:
-	mov.w		L_SCR1(%a6),%d0
-	subi.w		&mantissalen+2,%d0	# subtract mantissalen+2 from larger exp
-
-	cmp.w		%d0,2+L_SCR1(%a6)	# is difference >= len(mantissa)+2?
-	bge.b		quick_scale22
-
-	mov.w		2+L_SCR1(%a6),%d0
-	add.w		0x2(%sp),%d0		# scale dst exponent by scale factor
-	mov.w		FP_SCR1_EX(%a6),%d1
-	andi.w		&0x8000,%d1
-	or.w		%d1,%d0			# concat {sgn,new exp}
-	mov.w		%d0,FP_SCR1_EX(%a6)	# insert new dst exponent
-
-	mov.l		(%sp)+,%d0		# return SCALE factor
-	rts
-
-quick_scale22:
-	andi.w		&0x8000,FP_SCR1_EX(%a6)	# zero dst exponent
-	bset		&0x0,1+FP_SCR1_EX(%a6)	# set exp = 1
-
-	mov.l		(%sp)+,%d0		# return SCALE factor
-	rts
-
-##########################################################################
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	scale_to_zero_src(): scale the exponent of extended precision	#
-#			     value at FP_SCR0(a6).			#
-#									#
-# XREF ****************************************************************	#
-#	norm() - normalize the mantissa if the operand was a DENORM	#
-#									#
-# INPUT ***************************************************************	#
-#	FP_SCR0(a6) = extended precision operand to be scaled		#
-#									#
-# OUTPUT **************************************************************	#
-#	FP_SCR0(a6) = scaled extended precision operand			#
-#	d0	    = scale value					#
-#									#
-# ALGORITHM ***********************************************************	#
-#	Set the exponent of the input operand to 0x3fff. Save the value	#
-# of the difference between the original and new exponent. Then,	#
-# normalize the operand if it was a DENORM. Add this normalization	#
-# value to the previous value. Return the result.			#
-#									#
-#########################################################################
-
-	global		scale_to_zero_src
-scale_to_zero_src:
-	mov.w		FP_SCR0_EX(%a6),%d1	# extract operand's {sgn,exp}
-	mov.w		%d1,%d0			# make a copy
-
-	andi.l		&0x7fff,%d1		# extract operand's exponent
-
-	andi.w		&0x8000,%d0		# extract operand's sgn
-	or.w		&0x3fff,%d0		# insert new operand's exponent(=0)
-
-	mov.w		%d0,FP_SCR0_EX(%a6)	# insert biased exponent
-
-	cmpi.b		STAG(%a6),&DENORM	# is operand normalized?
-	beq.b		stzs_denorm		# normalize the DENORM
-
-stzs_norm:
-	mov.l		&0x3fff,%d0
-	sub.l		%d1,%d0			# scale = BIAS + (-exp)
-
-	rts
-
-stzs_denorm:
-	lea		FP_SCR0(%a6),%a0	# pass ptr to src op
-	bsr.l		norm			# normalize denorm
-	neg.l		%d0			# new exponent = -(shft val)
-	mov.l		%d0,%d1			# prepare for op_norm call
-	bra.b		stzs_norm		# finish scaling
-
-###
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	scale_sqrt(): scale the input operand exponent so a subsequent	#
-#		      fsqrt operation won't take an exception.		#
-#									#
-# XREF ****************************************************************	#
-#	norm() - normalize the mantissa if the operand was a DENORM	#
-#									#
-# INPUT ***************************************************************	#
-#	FP_SCR0(a6) = extended precision operand to be scaled		#
-#									#
-# OUTPUT **************************************************************	#
-#	FP_SCR0(a6) = scaled extended precision operand			#
-#	d0	    = scale value					#
-#									#
-# ALGORITHM ***********************************************************	#
-#	If the input operand is a DENORM, normalize it.			#
-#	If the exponent of the input operand is even, set the exponent	#
-# to 0x3ffe and return a scale factor of "(exp-0x3ffe)/2". If the	#
-# exponent of the input operand is off, set the exponent to ox3fff and	#
-# return a scale factor of "(exp-0x3fff)/2".				#
-#									#
-#########################################################################
-
-	global		scale_sqrt
-scale_sqrt:
-	cmpi.b		STAG(%a6),&DENORM	# is operand normalized?
-	beq.b		ss_denorm		# normalize the DENORM
-
-	mov.w		FP_SCR0_EX(%a6),%d1	# extract operand's {sgn,exp}
-	andi.l		&0x7fff,%d1		# extract operand's exponent
-
-	andi.w		&0x8000,FP_SCR0_EX(%a6)	# extract operand's sgn
-
-	btst		&0x0,%d1		# is exp even or odd?
-	beq.b		ss_norm_even
-
-	ori.w		&0x3fff,FP_SCR0_EX(%a6)	# insert new operand's exponent(=0)
-
-	mov.l		&0x3fff,%d0
-	sub.l		%d1,%d0			# scale = BIAS + (-exp)
-	asr.l		&0x1,%d0		# divide scale factor by 2
-	rts
-
-ss_norm_even:
-	ori.w		&0x3ffe,FP_SCR0_EX(%a6)	# insert new operand's exponent(=0)
-
-	mov.l		&0x3ffe,%d0
-	sub.l		%d1,%d0			# scale = BIAS + (-exp)
-	asr.l		&0x1,%d0		# divide scale factor by 2
-	rts
-
-ss_denorm:
-	lea		FP_SCR0(%a6),%a0	# pass ptr to src op
-	bsr.l		norm			# normalize denorm
-
-	btst		&0x0,%d0		# is exp even or odd?
-	beq.b		ss_denorm_even
-
-	ori.w		&0x3fff,FP_SCR0_EX(%a6)	# insert new operand's exponent(=0)
-
-	add.l		&0x3fff,%d0
-	asr.l		&0x1,%d0		# divide scale factor by 2
-	rts
-
-ss_denorm_even:
-	ori.w		&0x3ffe,FP_SCR0_EX(%a6)	# insert new operand's exponent(=0)
-
-	add.l		&0x3ffe,%d0
-	asr.l		&0x1,%d0		# divide scale factor by 2
-	rts
-
-###
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	scale_to_zero_dst(): scale the exponent of extended precision	#
-#			     value at FP_SCR1(a6).			#
-#									#
-# XREF ****************************************************************	#
-#	norm() - normalize the mantissa if the operand was a DENORM	#
-#									#
-# INPUT ***************************************************************	#
-#	FP_SCR1(a6) = extended precision operand to be scaled		#
-#									#
-# OUTPUT **************************************************************	#
-#	FP_SCR1(a6) = scaled extended precision operand			#
-#	d0	    = scale value					#
-#									#
-# ALGORITHM ***********************************************************	#
-#	Set the exponent of the input operand to 0x3fff. Save the value	#
-# of the difference between the original and new exponent. Then,	#
-# normalize the operand if it was a DENORM. Add this normalization	#
-# value to the previous value. Return the result.			#
-#									#
-#########################################################################
-
-	global		scale_to_zero_dst
-scale_to_zero_dst:
-	mov.w		FP_SCR1_EX(%a6),%d1	# extract operand's {sgn,exp}
-	mov.w		%d1,%d0			# make a copy
-
-	andi.l		&0x7fff,%d1		# extract operand's exponent
-
-	andi.w		&0x8000,%d0		# extract operand's sgn
-	or.w		&0x3fff,%d0		# insert new operand's exponent(=0)
-
-	mov.w		%d0,FP_SCR1_EX(%a6)	# insert biased exponent
-
-	cmpi.b		DTAG(%a6),&DENORM	# is operand normalized?
-	beq.b		stzd_denorm		# normalize the DENORM
-
-stzd_norm:
-	mov.l		&0x3fff,%d0
-	sub.l		%d1,%d0			# scale = BIAS + (-exp)
-	rts
-
-stzd_denorm:
-	lea		FP_SCR1(%a6),%a0	# pass ptr to dst op
-	bsr.l		norm			# normalize denorm
-	neg.l		%d0			# new exponent = -(shft val)
-	mov.l		%d0,%d1			# prepare for op_norm call
-	bra.b		stzd_norm		# finish scaling
-
-##########################################################################
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	res_qnan(): return default result w/ QNAN operand for dyadic	#
-#	res_snan(): return default result w/ SNAN operand for dyadic	#
-#	res_qnan_1op(): return dflt result w/ QNAN operand for monadic	#
-#	res_snan_1op(): return dflt result w/ SNAN operand for monadic	#
-#									#
-# XREF ****************************************************************	#
-#	None								#
-#									#
-# INPUT ***************************************************************	#
-#	FP_SRC(a6) = pointer to extended precision src operand		#
-#	FP_DST(a6) = pointer to extended precision dst operand		#
-#									#
-# OUTPUT **************************************************************	#
-#	fp0 = default result						#
-#									#
-# ALGORITHM ***********************************************************	#
-#	If either operand (but not both operands) of an operation is a	#
-# nonsignalling NAN, then that NAN is returned as the result. If both	#
-# operands are nonsignalling NANs, then the destination operand		#
-# nonsignalling NAN is returned as the result.				#
-#	If either operand to an operation is a signalling NAN (SNAN),	#
-# then, the SNAN bit is set in the FPSR EXC byte. If the SNAN trap	#
-# enable bit is set in the FPCR, then the trap is taken and the		#
-# destination is not modified. If the SNAN trap enable bit is not set,	#
-# then the SNAN is converted to a nonsignalling NAN (by setting the	#
-# SNAN bit in the operand to one), and the operation continues as	#
-# described in the preceding paragraph, for nonsignalling NANs.		#
-#	Make sure the appropriate FPSR bits are set before exiting.	#
-#									#
-#########################################################################
-
-	global		res_qnan
-	global		res_snan
-res_qnan:
-res_snan:
-	cmp.b		DTAG(%a6), &SNAN	# is the dst an SNAN?
-	beq.b		dst_snan2
-	cmp.b		DTAG(%a6), &QNAN	# is the dst a  QNAN?
-	beq.b		dst_qnan2
-src_nan:
-	cmp.b		STAG(%a6), &QNAN
-	beq.b		src_qnan2
-	global		res_snan_1op
-res_snan_1op:
-src_snan2:
-	bset		&0x6, FP_SRC_HI(%a6)	# set SNAN bit
-	or.l		&nan_mask+aiop_mask+snan_mask, USER_FPSR(%a6)
-	lea		FP_SRC(%a6), %a0
-	bra.b		nan_comp
-	global		res_qnan_1op
-res_qnan_1op:
-src_qnan2:
-	or.l		&nan_mask, USER_FPSR(%a6)
-	lea		FP_SRC(%a6), %a0
-	bra.b		nan_comp
-dst_snan2:
-	or.l		&nan_mask+aiop_mask+snan_mask, USER_FPSR(%a6)
-	bset		&0x6, FP_DST_HI(%a6)	# set SNAN bit
-	lea		FP_DST(%a6), %a0
-	bra.b		nan_comp
-dst_qnan2:
-	lea		FP_DST(%a6), %a0
-	cmp.b		STAG(%a6), &SNAN
-	bne		nan_done
-	or.l		&aiop_mask+snan_mask, USER_FPSR(%a6)
-nan_done:
-	or.l		&nan_mask, USER_FPSR(%a6)
-nan_comp:
-	btst		&0x7, FTEMP_EX(%a0)	# is NAN neg?
-	beq.b		nan_not_neg
-	or.l		&neg_mask, USER_FPSR(%a6)
-nan_not_neg:
-	fmovm.x		(%a0), &0x80
-	rts
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	res_operr(): return default result during operand error		#
-#									#
-# XREF ****************************************************************	#
-#	None								#
-#									#
-# INPUT ***************************************************************	#
-#	None								#
-#									#
-# OUTPUT **************************************************************	#
-#	fp0 = default operand error result				#
-#									#
-# ALGORITHM ***********************************************************	#
-#	An nonsignalling NAN is returned as the default result when	#
-# an operand error occurs for the following cases:			#
-#									#
-#	Multiply: (Infinity x Zero)					#
-#	Divide  : (Zero / Zero) || (Infinity / Infinity)		#
-#									#
-#########################################################################
-
-	global		res_operr
-res_operr:
-	or.l		&nan_mask+operr_mask+aiop_mask, USER_FPSR(%a6)
-	fmovm.x		nan_return(%pc), &0x80
-	rts
-
-nan_return:
-	long		0x7fff0000, 0xffffffff, 0xffffffff
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	_denorm(): denormalize an intermediate result			#
-#									#
-# XREF ****************************************************************	#
-#	None								#
-#									#
-# INPUT *************************************************************** #
-#	a0 = points to the operand to be denormalized			#
-#		(in the internal extended format)			#
-#									#
-#	d0 = rounding precision						#
-#									#
-# OUTPUT **************************************************************	#
-#	a0 = pointer to the denormalized result				#
-#		(in the internal extended format)			#
-#									#
-#	d0 = guard,round,sticky						#
-#									#
-# ALGORITHM ***********************************************************	#
-#	According to the exponent underflow threshold for the given	#
-# precision, shift the mantissa bits to the right in order raise the	#
-# exponent of the operand to the threshold value. While shifting the	#
-# mantissa bits right, maintain the value of the guard, round, and	#
-# sticky bits.								#
-# other notes:								#
-#	(1) _denorm() is called by the underflow routines		#
-#	(2) _denorm() does NOT affect the status register		#
-#									#
-#########################################################################
-
-#
-# table of exponent threshold values for each precision
-#
-tbl_thresh:
-	short		0x0
-	short		sgl_thresh
-	short		dbl_thresh
-
-	global		_denorm
-_denorm:
-#
-# Load the exponent threshold for the precision selected and check
-# to see if (threshold - exponent) is > 65 in which case we can
-# simply calculate the sticky bit and zero the mantissa. otherwise
-# we have to call the denormalization routine.
-#
-	lsr.b		&0x2, %d0		# shift prec to lo bits
-	mov.w		(tbl_thresh.b,%pc,%d0.w*2), %d1 # load prec threshold
-	mov.w		%d1, %d0		# copy d1 into d0
-	sub.w		FTEMP_EX(%a0), %d0	# diff = threshold - exp
-	cmpi.w		%d0, &66		# is diff > 65? (mant + g,r bits)
-	bpl.b		denorm_set_stky		# yes; just calc sticky
-
-	clr.l		%d0			# clear g,r,s
-	btst		&inex2_bit, FPSR_EXCEPT(%a6) # yes; was INEX2 set?
-	beq.b		denorm_call		# no; don't change anything
-	bset		&29, %d0		# yes; set sticky bit
-
-denorm_call:
-	bsr.l		dnrm_lp			# denormalize the number
-	rts
-
-#
-# all bit would have been shifted off during the denorm so simply
-# calculate if the sticky should be set and clear the entire mantissa.
-#
-denorm_set_stky:
-	mov.l		&0x20000000, %d0	# set sticky bit in return value
-	mov.w		%d1, FTEMP_EX(%a0)	# load exp with threshold
-	clr.l		FTEMP_HI(%a0)		# set d1 = 0 (ms mantissa)
-	clr.l		FTEMP_LO(%a0)		# set d2 = 0 (ms mantissa)
-	rts
-
-#									#
-# dnrm_lp(): normalize exponent/mantissa to specified threshold		#
-#									#
-# INPUT:								#
-#	%a0	   : points to the operand to be denormalized		#
-#	%d0{31:29} : initial guard,round,sticky				#
-#	%d1{15:0}  : denormalization threshold				#
-# OUTPUT:								#
-#	%a0	   : points to the denormalized operand			#
-#	%d0{31:29} : final guard,round,sticky				#
-#									#
-
-# *** Local Equates *** #
-set	GRS,		L_SCR2			# g,r,s temp storage
-set	FTEMP_LO2,	L_SCR1			# FTEMP_LO copy
-
-	global		dnrm_lp
-dnrm_lp:
-
-#
-# make a copy of FTEMP_LO and place the g,r,s bits directly after it
-# in memory so as to make the bitfield extraction for denormalization easier.
-#
-	mov.l		FTEMP_LO(%a0), FTEMP_LO2(%a6) # make FTEMP_LO copy
-	mov.l		%d0, GRS(%a6)		# place g,r,s after it
-
-#
-# check to see how much less than the underflow threshold the operand
-# exponent is.
-#
-	mov.l		%d1, %d0		# copy the denorm threshold
-	sub.w		FTEMP_EX(%a0), %d1	# d1 = threshold - uns exponent
-	ble.b		dnrm_no_lp		# d1 <= 0
-	cmpi.w		%d1, &0x20		# is ( 0 <= d1 < 32) ?
-	blt.b		case_1			# yes
-	cmpi.w		%d1, &0x40		# is (32 <= d1 < 64) ?
-	blt.b		case_2			# yes
-	bra.w		case_3			# (d1 >= 64)
-
-#
-# No normalization necessary
-#
-dnrm_no_lp:
-	mov.l		GRS(%a6), %d0		# restore original g,r,s
-	rts
-
-#
-# case (0<d1<32)
-#
-# %d0 = denorm threshold
-# %d1 = "n" = amt to shift
-#
-#	---------------------------------------------------------
-#	|     FTEMP_HI	  |	FTEMP_LO     |grs000.........000|
-#	---------------------------------------------------------
-#	<-(32 - n)-><-(n)-><-(32 - n)-><-(n)-><-(32 - n)-><-(n)->
-#	\	   \		      \			 \
-#	 \	    \		       \		  \
-#	  \	     \			\		   \
-#	   \	      \			 \		    \
-#	    \	       \		  \		     \
-#	     \		\		   \		      \
-#	      \		 \		    \		       \
-#	       \	  \		     \			\
-#	<-(n)-><-(32 - n)-><------(32)-------><------(32)------->
-#	---------------------------------------------------------
-#	|0.....0| NEW_HI  |  NEW_FTEMP_LO     |grs		|
-#	---------------------------------------------------------
-#
-case_1:
-	mov.l		%d2, -(%sp)		# create temp storage
-
-	mov.w		%d0, FTEMP_EX(%a0)	# exponent = denorm threshold
-	mov.l		&32, %d0
-	sub.w		%d1, %d0		# %d0 = 32 - %d1
-
-	cmpi.w		%d1, &29		# is shft amt >= 29
-	blt.b		case1_extract		# no; no fix needed
-	mov.b		GRS(%a6), %d2
-	or.b		%d2, 3+FTEMP_LO2(%a6)
-
-case1_extract:
-	bfextu		FTEMP_HI(%a0){&0:%d0}, %d2 # %d2 = new FTEMP_HI
-	bfextu		FTEMP_HI(%a0){%d0:&32}, %d1 # %d1 = new FTEMP_LO
-	bfextu		FTEMP_LO2(%a6){%d0:&32}, %d0 # %d0 = new G,R,S
-
-	mov.l		%d2, FTEMP_HI(%a0)	# store new FTEMP_HI
-	mov.l		%d1, FTEMP_LO(%a0)	# store new FTEMP_LO
-
-	bftst		%d0{&2:&30}		# were bits shifted off?
-	beq.b		case1_sticky_clear	# no; go finish
-	bset		&rnd_stky_bit, %d0	# yes; set sticky bit
-
-case1_sticky_clear:
-	and.l		&0xe0000000, %d0	# clear all but G,R,S
-	mov.l		(%sp)+, %d2		# restore temp register
-	rts
-
-#
-# case (32<=d1<64)
-#
-# %d0 = denorm threshold
-# %d1 = "n" = amt to shift
-#
-#	---------------------------------------------------------
-#	|     FTEMP_HI	  |	FTEMP_LO     |grs000.........000|
-#	---------------------------------------------------------
-#	<-(32 - n)-><-(n)-><-(32 - n)-><-(n)-><-(32 - n)-><-(n)->
-#	\	   \		      \
-#	 \	    \		       \
-#	  \	     \			-------------------
-#	   \	      --------------------		   \
-#	    -------------------		  \		    \
-#			       \	   \		     \
-#				\	    \		      \
-#				 \	     \		       \
-#	<-------(32)------><-(n)-><-(32 - n)-><------(32)------->
-#	---------------------------------------------------------
-#	|0...............0|0....0| NEW_LO     |grs		|
-#	---------------------------------------------------------
-#
-case_2:
-	mov.l		%d2, -(%sp)		# create temp storage
-
-	mov.w		%d0, FTEMP_EX(%a0)	# exponent = denorm threshold
-	subi.w		&0x20, %d1		# %d1 now between 0 and 32
-	mov.l		&0x20, %d0
-	sub.w		%d1, %d0		# %d0 = 32 - %d1
-
-# subtle step here; or in the g,r,s at the bottom of FTEMP_LO to minimize
-# the number of bits to check for the sticky detect.
-# it only plays a role in shift amounts of 61-63.
-	mov.b		GRS(%a6), %d2
-	or.b		%d2, 3+FTEMP_LO2(%a6)
-
-	bfextu		FTEMP_HI(%a0){&0:%d0}, %d2 # %d2 = new FTEMP_LO
-	bfextu		FTEMP_HI(%a0){%d0:&32}, %d1 # %d1 = new G,R,S
-
-	bftst		%d1{&2:&30}		# were any bits shifted off?
-	bne.b		case2_set_sticky	# yes; set sticky bit
-	bftst		FTEMP_LO2(%a6){%d0:&31}	# were any bits shifted off?
-	bne.b		case2_set_sticky	# yes; set sticky bit
-
-	mov.l		%d1, %d0		# move new G,R,S to %d0
-	bra.b		case2_end
-
-case2_set_sticky:
-	mov.l		%d1, %d0		# move new G,R,S to %d0
-	bset		&rnd_stky_bit, %d0	# set sticky bit
-
-case2_end:
-	clr.l		FTEMP_HI(%a0)		# store FTEMP_HI = 0
-	mov.l		%d2, FTEMP_LO(%a0)	# store FTEMP_LO
-	and.l		&0xe0000000, %d0	# clear all but G,R,S
-
-	mov.l		(%sp)+,%d2		# restore temp register
-	rts
-
-#
-# case (d1>=64)
-#
-# %d0 = denorm threshold
-# %d1 = amt to shift
-#
-case_3:
-	mov.w		%d0, FTEMP_EX(%a0)	# insert denorm threshold
-
-	cmpi.w		%d1, &65		# is shift amt > 65?
-	blt.b		case3_64		# no; it's == 64
-	beq.b		case3_65		# no; it's == 65
-
-#
-# case (d1>65)
-#
-# Shift value is > 65 and out of range. All bits are shifted off.
-# Return a zero mantissa with the sticky bit set
-#
-	clr.l		FTEMP_HI(%a0)		# clear hi(mantissa)
-	clr.l		FTEMP_LO(%a0)		# clear lo(mantissa)
-	mov.l		&0x20000000, %d0	# set sticky bit
-	rts
-
-#
-# case (d1 == 64)
-#
-#	---------------------------------------------------------
-#	|     FTEMP_HI	  |	FTEMP_LO     |grs000.........000|
-#	---------------------------------------------------------
-#	<-------(32)------>
-#	\		   \
-#	 \		    \
-#	  \		     \
-#	   \		      ------------------------------
-#	    -------------------------------		    \
-#					   \		     \
-#					    \		      \
-#					     \		       \
-#					      <-------(32)------>
-#	---------------------------------------------------------
-#	|0...............0|0................0|grs		|
-#	---------------------------------------------------------
-#
-case3_64:
-	mov.l		FTEMP_HI(%a0), %d0	# fetch hi(mantissa)
-	mov.l		%d0, %d1		# make a copy
-	and.l		&0xc0000000, %d0	# extract G,R
-	and.l		&0x3fffffff, %d1	# extract other bits
-
-	bra.b		case3_complete
-
-#
-# case (d1 == 65)
-#
-#	---------------------------------------------------------
-#	|     FTEMP_HI	  |	FTEMP_LO     |grs000.........000|
-#	---------------------------------------------------------
-#	<-------(32)------>
-#	\		   \
-#	 \		    \
-#	  \		     \
-#	   \		      ------------------------------
-#	    --------------------------------		    \
-#					    \		     \
-#					     \		      \
-#					      \		       \
-#					       <-------(31)----->
-#	---------------------------------------------------------
-#	|0...............0|0................0|0rs		|
-#	---------------------------------------------------------
-#
-case3_65:
-	mov.l		FTEMP_HI(%a0), %d0	# fetch hi(mantissa)
-	and.l		&0x80000000, %d0	# extract R bit
-	lsr.l		&0x1, %d0		# shift high bit into R bit
-	and.l		&0x7fffffff, %d1	# extract other bits
-
-case3_complete:
-# last operation done was an "and" of the bits shifted off so the condition
-# codes are already set so branch accordingly.
-	bne.b		case3_set_sticky	# yes; go set new sticky
-	tst.l		FTEMP_LO(%a0)		# were any bits shifted off?
-	bne.b		case3_set_sticky	# yes; go set new sticky
-	tst.b		GRS(%a6)		# were any bits shifted off?
-	bne.b		case3_set_sticky	# yes; go set new sticky
-
-#
-# no bits were shifted off so don't set the sticky bit.
-# the guard and
-# the entire mantissa is zero.
-#
-	clr.l		FTEMP_HI(%a0)		# clear hi(mantissa)
-	clr.l		FTEMP_LO(%a0)		# clear lo(mantissa)
-	rts
-
-#
-# some bits were shifted off so set the sticky bit.
-# the entire mantissa is zero.
-#
-case3_set_sticky:
-	bset		&rnd_stky_bit,%d0	# set new sticky bit
-	clr.l		FTEMP_HI(%a0)		# clear hi(mantissa)
-	clr.l		FTEMP_LO(%a0)		# clear lo(mantissa)
-	rts
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	_round(): round result according to precision/mode		#
-#									#
-# XREF ****************************************************************	#
-#	None								#
-#									#
-# INPUT ***************************************************************	#
-#	a0	  = ptr to input operand in internal extended format	#
-#	d1(hi)    = contains rounding precision:			#
-#			ext = $0000xxxx					#
-#			sgl = $0004xxxx					#
-#			dbl = $0008xxxx					#
-#	d1(lo)	  = contains rounding mode:				#
-#			RN  = $xxxx0000					#
-#			RZ  = $xxxx0001					#
-#			RM  = $xxxx0002					#
-#			RP  = $xxxx0003					#
-#	d0{31:29} = contains the g,r,s bits (extended)			#
-#									#
-# OUTPUT **************************************************************	#
-#	a0 = pointer to rounded result					#
-#									#
-# ALGORITHM ***********************************************************	#
-#	On return the value pointed to by a0 is correctly rounded,	#
-#	a0 is preserved and the g-r-s bits in d0 are cleared.		#
-#	The result is not typed - the tag field is invalid.  The	#
-#	result is still in the internal extended format.		#
-#									#
-#	The INEX bit of USER_FPSR will be set if the rounded result was	#
-#	inexact (i.e. if any of the g-r-s bits were set).		#
-#									#
-#########################################################################
-
-	global		_round
-_round:
-#
-# ext_grs() looks at the rounding precision and sets the appropriate
-# G,R,S bits.
-# If (G,R,S == 0) then result is exact and round is done, else set
-# the inex flag in status reg and continue.
-#
-	bsr.l		ext_grs			# extract G,R,S
-
-	tst.l		%d0			# are G,R,S zero?
-	beq.w		truncate		# yes; round is complete
-
-	or.w		&inx2a_mask, 2+USER_FPSR(%a6) # set inex2/ainex
-
-#
-# Use rounding mode as an index into a jump table for these modes.
-# All of the following assumes grs != 0.
-#
-	mov.w		(tbl_mode.b,%pc,%d1.w*2), %a1 # load jump offset
-	jmp		(tbl_mode.b,%pc,%a1)	# jmp to rnd mode handler
-
-tbl_mode:
-	short		rnd_near - tbl_mode
-	short		truncate - tbl_mode	# RZ always truncates
-	short		rnd_mnus - tbl_mode
-	short		rnd_plus - tbl_mode
-
-#################################################################
-#	ROUND PLUS INFINITY					#
-#								#
-#	If sign of fp number = 0 (positive), then add 1 to l.	#
-#################################################################
-rnd_plus:
-	tst.b		FTEMP_SGN(%a0)		# check for sign
-	bmi.w		truncate		# if positive then truncate
-
-	mov.l		&0xffffffff, %d0	# force g,r,s to be all f's
-	swap		%d1			# set up d1 for round prec.
-
-	cmpi.b		%d1, &s_mode		# is prec = sgl?
-	beq.w		add_sgl			# yes
-	bgt.w		add_dbl			# no; it's dbl
-	bra.w		add_ext			# no; it's ext
-
-#################################################################
-#	ROUND MINUS INFINITY					#
-#								#
-#	If sign of fp number = 1 (negative), then add 1 to l.	#
-#################################################################
-rnd_mnus:
-	tst.b		FTEMP_SGN(%a0)		# check for sign
-	bpl.w		truncate		# if negative then truncate
-
-	mov.l		&0xffffffff, %d0	# force g,r,s to be all f's
-	swap		%d1			# set up d1 for round prec.
-
-	cmpi.b		%d1, &s_mode		# is prec = sgl?
-	beq.w		add_sgl			# yes
-	bgt.w		add_dbl			# no; it's dbl
-	bra.w		add_ext			# no; it's ext
-
-#################################################################
-#	ROUND NEAREST						#
-#								#
-#	If (g=1), then add 1 to l and if (r=s=0), then clear l	#
-#	Note that this will round to even in case of a tie.	#
-#################################################################
-rnd_near:
-	asl.l		&0x1, %d0		# shift g-bit to c-bit
-	bcc.w		truncate		# if (g=1) then
-
-	swap		%d1			# set up d1 for round prec.
-
-	cmpi.b		%d1, &s_mode		# is prec = sgl?
-	beq.w		add_sgl			# yes
-	bgt.w		add_dbl			# no; it's dbl
-	bra.w		add_ext			# no; it's ext
-
-# *** LOCAL EQUATES ***
-set	ad_1_sgl,	0x00000100	# constant to add 1 to l-bit in sgl prec
-set	ad_1_dbl,	0x00000800	# constant to add 1 to l-bit in dbl prec
-
-#########################
-#	ADD SINGLE	#
-#########################
-add_sgl:
-	add.l		&ad_1_sgl, FTEMP_HI(%a0)
-	bcc.b		scc_clr			# no mantissa overflow
-	roxr.w		FTEMP_HI(%a0)		# shift v-bit back in
-	roxr.w		FTEMP_HI+2(%a0)		# shift v-bit back in
-	add.w		&0x1, FTEMP_EX(%a0)	# and incr exponent
-scc_clr:
-	tst.l		%d0			# test for rs = 0
-	bne.b		sgl_done
-	and.w		&0xfe00, FTEMP_HI+2(%a0) # clear the l-bit
-sgl_done:
-	and.l		&0xffffff00, FTEMP_HI(%a0) # truncate bits beyond sgl limit
-	clr.l		FTEMP_LO(%a0)		# clear d2
-	rts
-
-#########################
-#	ADD EXTENDED	#
-#########################
-add_ext:
-	addq.l		&1,FTEMP_LO(%a0)	# add 1 to l-bit
-	bcc.b		xcc_clr			# test for carry out
-	addq.l		&1,FTEMP_HI(%a0)	# propagate carry
-	bcc.b		xcc_clr
-	roxr.w		FTEMP_HI(%a0)		# mant is 0 so restore v-bit
-	roxr.w		FTEMP_HI+2(%a0)		# mant is 0 so restore v-bit
-	roxr.w		FTEMP_LO(%a0)
-	roxr.w		FTEMP_LO+2(%a0)
-	add.w		&0x1,FTEMP_EX(%a0)	# and inc exp
-xcc_clr:
-	tst.l		%d0			# test rs = 0
-	bne.b		add_ext_done
-	and.b		&0xfe,FTEMP_LO+3(%a0)	# clear the l bit
-add_ext_done:
-	rts
-
-#########################
-#	ADD DOUBLE	#
-#########################
-add_dbl:
-	add.l		&ad_1_dbl, FTEMP_LO(%a0) # add 1 to lsb
-	bcc.b		dcc_clr			# no carry
-	addq.l		&0x1, FTEMP_HI(%a0)	# propagate carry
-	bcc.b		dcc_clr			# no carry
-
-	roxr.w		FTEMP_HI(%a0)		# mant is 0 so restore v-bit
-	roxr.w		FTEMP_HI+2(%a0)		# mant is 0 so restore v-bit
-	roxr.w		FTEMP_LO(%a0)
-	roxr.w		FTEMP_LO+2(%a0)
-	addq.w		&0x1, FTEMP_EX(%a0)	# incr exponent
-dcc_clr:
-	tst.l		%d0			# test for rs = 0
-	bne.b		dbl_done
-	and.w		&0xf000, FTEMP_LO+2(%a0) # clear the l-bit
-
-dbl_done:
-	and.l		&0xfffff800,FTEMP_LO(%a0) # truncate bits beyond dbl limit
-	rts
-
-###########################
-# Truncate all other bits #
-###########################
-truncate:
-	swap		%d1			# select rnd prec
-
-	cmpi.b		%d1, &s_mode		# is prec sgl?
-	beq.w		sgl_done		# yes
-	bgt.b		dbl_done		# no; it's dbl
-	rts					# no; it's ext
-
-
-#
-# ext_grs(): extract guard, round and sticky bits according to
-#	     rounding precision.
-#
-# INPUT
-#	d0	   = extended precision g,r,s (in d0{31:29})
-#	d1	   = {PREC,ROUND}
-# OUTPUT
-#	d0{31:29}  = guard, round, sticky
-#
-# The ext_grs extract the guard/round/sticky bits according to the
-# selected rounding precision. It is called by the round subroutine
-# only.  All registers except d0 are kept intact. d0 becomes an
-# updated guard,round,sticky in d0{31:29}
-#
-# Notes: the ext_grs uses the round PREC, and therefore has to swap d1
-#	 prior to usage, and needs to restore d1 to original. this
-#	 routine is tightly tied to the round routine and not meant to
-#	 uphold standard subroutine calling practices.
-#
-
-ext_grs:
-	swap		%d1			# have d1.w point to round precision
-	tst.b		%d1			# is rnd prec = extended?
-	bne.b		ext_grs_not_ext		# no; go handle sgl or dbl
-
-#
-# %d0 actually already hold g,r,s since _round() had it before calling
-# this function. so, as long as we don't disturb it, we are "returning" it.
-#
-ext_grs_ext:
-	swap		%d1			# yes; return to correct positions
-	rts
-
-ext_grs_not_ext:
-	movm.l		&0x3000, -(%sp)		# make some temp registers {d2/d3}
-
-	cmpi.b		%d1, &s_mode		# is rnd prec = sgl?
-	bne.b		ext_grs_dbl		# no; go handle dbl
-
-#
-# sgl:
-#	96		64	  40	32		0
-#	-----------------------------------------------------
-#	| EXP	|XXXXXXX|	  |xx	|		|grs|
-#	-----------------------------------------------------
-#			<--(24)--->nn\			   /
-#				   ee ---------------------
-#				   ww		|
-#						v
-#				   gr	   new sticky
-#
-ext_grs_sgl:
-	bfextu		FTEMP_HI(%a0){&24:&2}, %d3 # sgl prec. g-r are 2 bits right
-	mov.l		&30, %d2		# of the sgl prec. limits
-	lsl.l		%d2, %d3		# shift g-r bits to MSB of d3
-	mov.l		FTEMP_HI(%a0), %d2	# get word 2 for s-bit test
-	and.l		&0x0000003f, %d2	# s bit is the or of all other
-	bne.b		ext_grs_st_stky		# bits to the right of g-r
-	tst.l		FTEMP_LO(%a0)		# test lower mantissa
-	bne.b		ext_grs_st_stky		# if any are set, set sticky
-	tst.l		%d0			# test original g,r,s
-	bne.b		ext_grs_st_stky		# if any are set, set sticky
-	bra.b		ext_grs_end_sd		# if words 3 and 4 are clr, exit
-
-#
-# dbl:
-#	96		64		32	 11	0
-#	-----------------------------------------------------
-#	| EXP	|XXXXXXX|		|	 |xx	|grs|
-#	-----------------------------------------------------
-#						  nn\	    /
-#						  ee -------
-#						  ww	|
-#							v
-#						  gr	new sticky
-#
-ext_grs_dbl:
-	bfextu		FTEMP_LO(%a0){&21:&2}, %d3 # dbl-prec. g-r are 2 bits right
-	mov.l		&30, %d2		# of the dbl prec. limits
-	lsl.l		%d2, %d3		# shift g-r bits to the MSB of d3
-	mov.l		FTEMP_LO(%a0), %d2	# get lower mantissa  for s-bit test
-	and.l		&0x000001ff, %d2	# s bit is the or-ing of all
-	bne.b		ext_grs_st_stky		# other bits to the right of g-r
-	tst.l		%d0			# test word original g,r,s
-	bne.b		ext_grs_st_stky		# if any are set, set sticky
-	bra.b		ext_grs_end_sd		# if clear, exit
-
-ext_grs_st_stky:
-	bset		&rnd_stky_bit, %d3	# set sticky bit
-ext_grs_end_sd:
-	mov.l		%d3, %d0		# return grs to d0
-
-	movm.l		(%sp)+, &0xc		# restore scratch registers {d2/d3}
-
-	swap		%d1			# restore d1 to original
-	rts
-
-#########################################################################
-# norm(): normalize the mantissa of an extended precision input. the	#
-#	  input operand should not be normalized already.		#
-#									#
-# XDEF ****************************************************************	#
-#	norm()								#
-#									#
-# XREF **************************************************************** #
-#	none								#
-#									#
-# INPUT *************************************************************** #
-#	a0 = pointer fp extended precision operand to normalize		#
-#									#
-# OUTPUT ************************************************************** #
-#	d0 = number of bit positions the mantissa was shifted		#
-#	a0 = the input operand's mantissa is normalized; the exponent	#
-#	     is unchanged.						#
-#									#
-#########################################################################
-	global		norm
-norm:
-	mov.l		%d2, -(%sp)		# create some temp regs
-	mov.l		%d3, -(%sp)
-
-	mov.l		FTEMP_HI(%a0), %d0	# load hi(mantissa)
-	mov.l		FTEMP_LO(%a0), %d1	# load lo(mantissa)
-
-	bfffo		%d0{&0:&32}, %d2	# how many places to shift?
-	beq.b		norm_lo			# hi(man) is all zeroes!
-
-norm_hi:
-	lsl.l		%d2, %d0		# left shift hi(man)
-	bfextu		%d1{&0:%d2}, %d3	# extract lo bits
-
-	or.l		%d3, %d0		# create hi(man)
-	lsl.l		%d2, %d1		# create lo(man)
-
-	mov.l		%d0, FTEMP_HI(%a0)	# store new hi(man)
-	mov.l		%d1, FTEMP_LO(%a0)	# store new lo(man)
-
-	mov.l		%d2, %d0		# return shift amount
-
-	mov.l		(%sp)+, %d3		# restore temp regs
-	mov.l		(%sp)+, %d2
-
-	rts
-
-norm_lo:
-	bfffo		%d1{&0:&32}, %d2	# how many places to shift?
-	lsl.l		%d2, %d1		# shift lo(man)
-	add.l		&32, %d2		# add 32 to shft amount
-
-	mov.l		%d1, FTEMP_HI(%a0)	# store hi(man)
-	clr.l		FTEMP_LO(%a0)		# lo(man) is now zero
-
-	mov.l		%d2, %d0		# return shift amount
-
-	mov.l		(%sp)+, %d3		# restore temp regs
-	mov.l		(%sp)+, %d2
-
-	rts
-
-#########################################################################
-# unnorm_fix(): - changes an UNNORM to one of NORM, DENORM, or ZERO	#
-#		- returns corresponding optype tag			#
-#									#
-# XDEF ****************************************************************	#
-#	unnorm_fix()							#
-#									#
-# XREF **************************************************************** #
-#	norm() - normalize the mantissa					#
-#									#
-# INPUT *************************************************************** #
-#	a0 = pointer to unnormalized extended precision number		#
-#									#
-# OUTPUT ************************************************************** #
-#	d0 = optype tag - is corrected to one of NORM, DENORM, or ZERO	#
-#	a0 = input operand has been converted to a norm, denorm, or	#
-#	     zero; both the exponent and mantissa are changed.		#
-#									#
-#########################################################################
-
-	global		unnorm_fix
-unnorm_fix:
-	bfffo		FTEMP_HI(%a0){&0:&32}, %d0 # how many shifts are needed?
-	bne.b		unnorm_shift		# hi(man) is not all zeroes
-
-#
-# hi(man) is all zeroes so see if any bits in lo(man) are set
-#
-unnorm_chk_lo:
-	bfffo		FTEMP_LO(%a0){&0:&32}, %d0 # is operand really a zero?
-	beq.w		unnorm_zero		# yes
-
-	add.w		&32, %d0		# no; fix shift distance
-
-#
-# d0 = # shifts needed for complete normalization
-#
-unnorm_shift:
-	clr.l		%d1			# clear top word
-	mov.w		FTEMP_EX(%a0), %d1	# extract exponent
-	and.w		&0x7fff, %d1		# strip off sgn
-
-	cmp.w		%d0, %d1		# will denorm push exp < 0?
-	bgt.b		unnorm_nrm_zero		# yes; denorm only until exp = 0
-
-#
-# exponent would not go < 0. Therefore, number stays normalized
-#
-	sub.w		%d0, %d1		# shift exponent value
-	mov.w		FTEMP_EX(%a0), %d0	# load old exponent
-	and.w		&0x8000, %d0		# save old sign
-	or.w		%d0, %d1		# {sgn,new exp}
-	mov.w		%d1, FTEMP_EX(%a0)	# insert new exponent
-
-	bsr.l		norm			# normalize UNNORM
-
-	mov.b		&NORM, %d0		# return new optype tag
-	rts
-
-#
-# exponent would go < 0, so only denormalize until exp = 0
-#
-unnorm_nrm_zero:
-	cmp.b		%d1, &32		# is exp <= 32?
-	bgt.b		unnorm_nrm_zero_lrg	# no; go handle large exponent
-
-	bfextu		FTEMP_HI(%a0){%d1:&32}, %d0 # extract new hi(man)
-	mov.l		%d0, FTEMP_HI(%a0)	# save new hi(man)
-
-	mov.l		FTEMP_LO(%a0), %d0	# fetch old lo(man)
-	lsl.l		%d1, %d0		# extract new lo(man)
-	mov.l		%d0, FTEMP_LO(%a0)	# save new lo(man)
-
-	and.w		&0x8000, FTEMP_EX(%a0)	# set exp = 0
-
-	mov.b		&DENORM, %d0		# return new optype tag
-	rts
-
-#
-# only mantissa bits set are in lo(man)
-#
-unnorm_nrm_zero_lrg:
-	sub.w		&32, %d1		# adjust shft amt by 32
-
-	mov.l		FTEMP_LO(%a0), %d0	# fetch old lo(man)
-	lsl.l		%d1, %d0		# left shift lo(man)
-
-	mov.l		%d0, FTEMP_HI(%a0)	# store new hi(man)
-	clr.l		FTEMP_LO(%a0)		# lo(man) = 0
-
-	and.w		&0x8000, FTEMP_EX(%a0)	# set exp = 0
-
-	mov.b		&DENORM, %d0		# return new optype tag
-	rts
-
-#
-# whole mantissa is zero so this UNNORM is actually a zero
-#
-unnorm_zero:
-	and.w		&0x8000, FTEMP_EX(%a0)	# force exponent to zero
-
-	mov.b		&ZERO, %d0		# fix optype tag
-	rts
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	set_tag_x(): return the optype of the input ext fp number	#
-#									#
-# XREF ****************************************************************	#
-#	None								#
-#									#
-# INPUT ***************************************************************	#
-#	a0 = pointer to extended precision operand			#
-#									#
-# OUTPUT **************************************************************	#
-#	d0 = value of type tag						#
-#		one of: NORM, INF, QNAN, SNAN, DENORM, UNNORM, ZERO	#
-#									#
-# ALGORITHM ***********************************************************	#
-#	Simply test the exponent, j-bit, and mantissa values to		#
-# determine the type of operand.					#
-#	If it's an unnormalized zero, alter the operand and force it	#
-# to be a normal zero.							#
-#									#
-#########################################################################
-
-	global		set_tag_x
-set_tag_x:
-	mov.w		FTEMP_EX(%a0), %d0	# extract exponent
-	andi.w		&0x7fff, %d0		# strip off sign
-	cmpi.w		%d0, &0x7fff		# is (EXP == MAX)?
-	beq.b		inf_or_nan_x
-not_inf_or_nan_x:
-	btst		&0x7,FTEMP_HI(%a0)
-	beq.b		not_norm_x
-is_norm_x:
-	mov.b		&NORM, %d0
-	rts
-not_norm_x:
-	tst.w		%d0			# is exponent = 0?
-	bne.b		is_unnorm_x
-not_unnorm_x:
-	tst.l		FTEMP_HI(%a0)
-	bne.b		is_denorm_x
-	tst.l		FTEMP_LO(%a0)
-	bne.b		is_denorm_x
-is_zero_x:
-	mov.b		&ZERO, %d0
-	rts
-is_denorm_x:
-	mov.b		&DENORM, %d0
-	rts
-# must distinguish now "Unnormalized zeroes" which we
-# must convert to zero.
-is_unnorm_x:
-	tst.l		FTEMP_HI(%a0)
-	bne.b		is_unnorm_reg_x
-	tst.l		FTEMP_LO(%a0)
-	bne.b		is_unnorm_reg_x
-# it's an "unnormalized zero". let's convert it to an actual zero...
-	andi.w		&0x8000,FTEMP_EX(%a0)	# clear exponent
-	mov.b		&ZERO, %d0
-	rts
-is_unnorm_reg_x:
-	mov.b		&UNNORM, %d0
-	rts
-inf_or_nan_x:
-	tst.l		FTEMP_LO(%a0)
-	bne.b		is_nan_x
-	mov.l		FTEMP_HI(%a0), %d0
-	and.l		&0x7fffffff, %d0	# msb is a don't care!
-	bne.b		is_nan_x
-is_inf_x:
-	mov.b		&INF, %d0
-	rts
-is_nan_x:
-	btst		&0x6, FTEMP_HI(%a0)
-	beq.b		is_snan_x
-	mov.b		&QNAN, %d0
-	rts
-is_snan_x:
-	mov.b		&SNAN, %d0
-	rts
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	set_tag_d(): return the optype of the input dbl fp number	#
-#									#
-# XREF ****************************************************************	#
-#	None								#
-#									#
-# INPUT ***************************************************************	#
-#	a0 = points to double precision operand				#
-#									#
-# OUTPUT **************************************************************	#
-#	d0 = value of type tag						#
-#		one of: NORM, INF, QNAN, SNAN, DENORM, ZERO		#
-#									#
-# ALGORITHM ***********************************************************	#
-#	Simply test the exponent, j-bit, and mantissa values to		#
-# determine the type of operand.					#
-#									#
-#########################################################################
-
-	global		set_tag_d
-set_tag_d:
-	mov.l		FTEMP(%a0), %d0
-	mov.l		%d0, %d1
-
-	andi.l		&0x7ff00000, %d0
-	beq.b		zero_or_denorm_d
-
-	cmpi.l		%d0, &0x7ff00000
-	beq.b		inf_or_nan_d
-
-is_norm_d:
-	mov.b		&NORM, %d0
-	rts
-zero_or_denorm_d:
-	and.l		&0x000fffff, %d1
-	bne		is_denorm_d
-	tst.l		4+FTEMP(%a0)
-	bne		is_denorm_d
-is_zero_d:
-	mov.b		&ZERO, %d0
-	rts
-is_denorm_d:
-	mov.b		&DENORM, %d0
-	rts
-inf_or_nan_d:
-	and.l		&0x000fffff, %d1
-	bne		is_nan_d
-	tst.l		4+FTEMP(%a0)
-	bne		is_nan_d
-is_inf_d:
-	mov.b		&INF, %d0
-	rts
-is_nan_d:
-	btst		&19, %d1
-	bne		is_qnan_d
-is_snan_d:
-	mov.b		&SNAN, %d0
-	rts
-is_qnan_d:
-	mov.b		&QNAN, %d0
-	rts
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	set_tag_s(): return the optype of the input sgl fp number	#
-#									#
-# XREF ****************************************************************	#
-#	None								#
-#									#
-# INPUT ***************************************************************	#
-#	a0 = pointer to single precision operand			#
-#									#
-# OUTPUT **************************************************************	#
-#	d0 = value of type tag						#
-#		one of: NORM, INF, QNAN, SNAN, DENORM, ZERO		#
-#									#
-# ALGORITHM ***********************************************************	#
-#	Simply test the exponent, j-bit, and mantissa values to		#
-# determine the type of operand.					#
-#									#
-#########################################################################
-
-	global		set_tag_s
-set_tag_s:
-	mov.l		FTEMP(%a0), %d0
-	mov.l		%d0, %d1
-
-	andi.l		&0x7f800000, %d0
-	beq.b		zero_or_denorm_s
-
-	cmpi.l		%d0, &0x7f800000
-	beq.b		inf_or_nan_s
-
-is_norm_s:
-	mov.b		&NORM, %d0
-	rts
-zero_or_denorm_s:
-	and.l		&0x007fffff, %d1
-	bne		is_denorm_s
-is_zero_s:
-	mov.b		&ZERO, %d0
-	rts
-is_denorm_s:
-	mov.b		&DENORM, %d0
-	rts
-inf_or_nan_s:
-	and.l		&0x007fffff, %d1
-	bne		is_nan_s
-is_inf_s:
-	mov.b		&INF, %d0
-	rts
-is_nan_s:
-	btst		&22, %d1
-	bne		is_qnan_s
-is_snan_s:
-	mov.b		&SNAN, %d0
-	rts
-is_qnan_s:
-	mov.b		&QNAN, %d0
-	rts
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	unf_res(): routine to produce default underflow result of a	#
-#		   scaled extended precision number; this is used by	#
-#		   fadd/fdiv/fmul/etc. emulation routines.		#
-#	unf_res4(): same as above but for fsglmul/fsgldiv which use	#
-#		    single round prec and extended prec mode.		#
-#									#
-# XREF ****************************************************************	#
-#	_denorm() - denormalize according to scale factor		#
-#	_round() - round denormalized number according to rnd prec	#
-#									#
-# INPUT ***************************************************************	#
-#	a0 = pointer to extended precison operand			#
-#	d0 = scale factor						#
-#	d1 = rounding precision/mode					#
-#									#
-# OUTPUT **************************************************************	#
-#	a0 = pointer to default underflow result in extended precision	#
-#	d0.b = result FPSR_cc which caller may or may not want to save	#
-#									#
-# ALGORITHM ***********************************************************	#
-#	Convert the input operand to "internal format" which means the	#
-# exponent is extended to 16 bits and the sign is stored in the unused	#
-# portion of the extended precison operand. Denormalize the number	#
-# according to the scale factor passed in d0. Then, round the		#
-# denormalized result.							#
-#	Set the FPSR_exc bits as appropriate but return the cc bits in	#
-# d0 in case the caller doesn't want to save them (as is the case for	#
-# fmove out).								#
-#	unf_res4() for fsglmul/fsgldiv forces the denorm to extended	#
-# precision and the rounding mode to single.				#
-#									#
-#########################################################################
-	global		unf_res
-unf_res:
-	mov.l		%d1, -(%sp)		# save rnd prec,mode on stack
-
-	btst		&0x7, FTEMP_EX(%a0)	# make "internal" format
-	sne		FTEMP_SGN(%a0)
-
-	mov.w		FTEMP_EX(%a0), %d1	# extract exponent
-	and.w		&0x7fff, %d1
-	sub.w		%d0, %d1
-	mov.w		%d1, FTEMP_EX(%a0)	# insert 16 bit exponent
-
-	mov.l		%a0, -(%sp)		# save operand ptr during calls
-
-	mov.l		0x4(%sp),%d0		# pass rnd prec.
-	andi.w		&0x00c0,%d0
-	lsr.w		&0x4,%d0
-	bsr.l		_denorm			# denorm result
-
-	mov.l		(%sp),%a0
-	mov.w		0x6(%sp),%d1		# load prec:mode into %d1
-	andi.w		&0xc0,%d1		# extract rnd prec
-	lsr.w		&0x4,%d1
-	swap		%d1
-	mov.w		0x6(%sp),%d1
-	andi.w		&0x30,%d1
-	lsr.w		&0x4,%d1
-	bsr.l		_round			# round the denorm
-
-	mov.l		(%sp)+, %a0
-
-# result is now rounded properly. convert back to normal format
-	bclr		&0x7, FTEMP_EX(%a0)	# clear sgn first; may have residue
-	tst.b		FTEMP_SGN(%a0)		# is "internal result" sign set?
-	beq.b		unf_res_chkifzero	# no; result is positive
-	bset		&0x7, FTEMP_EX(%a0)	# set result sgn
-	clr.b		FTEMP_SGN(%a0)		# clear temp sign
-
-# the number may have become zero after rounding. set ccodes accordingly.
-unf_res_chkifzero:
-	clr.l		%d0
-	tst.l		FTEMP_HI(%a0)		# is value now a zero?
-	bne.b		unf_res_cont		# no
-	tst.l		FTEMP_LO(%a0)
-	bne.b		unf_res_cont		# no
-#	bset		&z_bit, FPSR_CC(%a6)	# yes; set zero ccode bit
-	bset		&z_bit, %d0		# yes; set zero ccode bit
-
-unf_res_cont:
-
-#
-# can inex1 also be set along with unfl and inex2???
-#
-# we know that underflow has occurred. aunfl should be set if INEX2 is also set.
-#
-	btst		&inex2_bit, FPSR_EXCEPT(%a6) # is INEX2 set?
-	beq.b		unf_res_end		# no
-	bset		&aunfl_bit, FPSR_AEXCEPT(%a6) # yes; set aunfl
-
-unf_res_end:
-	add.l		&0x4, %sp		# clear stack
-	rts
-
-# unf_res() for fsglmul() and fsgldiv().
-	global		unf_res4
-unf_res4:
-	mov.l		%d1,-(%sp)		# save rnd prec,mode on stack
-
-	btst		&0x7,FTEMP_EX(%a0)	# make "internal" format
-	sne		FTEMP_SGN(%a0)
-
-	mov.w		FTEMP_EX(%a0),%d1	# extract exponent
-	and.w		&0x7fff,%d1
-	sub.w		%d0,%d1
-	mov.w		%d1,FTEMP_EX(%a0)	# insert 16 bit exponent
-
-	mov.l		%a0,-(%sp)		# save operand ptr during calls
-
-	clr.l		%d0			# force rnd prec = ext
-	bsr.l		_denorm			# denorm result
-
-	mov.l		(%sp),%a0
-	mov.w		&s_mode,%d1		# force rnd prec = sgl
-	swap		%d1
-	mov.w		0x6(%sp),%d1		# load rnd mode
-	andi.w		&0x30,%d1		# extract rnd prec
-	lsr.w		&0x4,%d1
-	bsr.l		_round			# round the denorm
-
-	mov.l		(%sp)+,%a0
-
-# result is now rounded properly. convert back to normal format
-	bclr		&0x7,FTEMP_EX(%a0)	# clear sgn first; may have residue
-	tst.b		FTEMP_SGN(%a0)		# is "internal result" sign set?
-	beq.b		unf_res4_chkifzero	# no; result is positive
-	bset		&0x7,FTEMP_EX(%a0)	# set result sgn
-	clr.b		FTEMP_SGN(%a0)		# clear temp sign
-
-# the number may have become zero after rounding. set ccodes accordingly.
-unf_res4_chkifzero:
-	clr.l		%d0
-	tst.l		FTEMP_HI(%a0)		# is value now a zero?
-	bne.b		unf_res4_cont		# no
-	tst.l		FTEMP_LO(%a0)
-	bne.b		unf_res4_cont		# no
-#	bset		&z_bit,FPSR_CC(%a6)	# yes; set zero ccode bit
-	bset		&z_bit,%d0		# yes; set zero ccode bit
-
-unf_res4_cont:
-
-#
-# can inex1 also be set along with unfl and inex2???
-#
-# we know that underflow has occurred. aunfl should be set if INEX2 is also set.
-#
-	btst		&inex2_bit,FPSR_EXCEPT(%a6) # is INEX2 set?
-	beq.b		unf_res4_end		# no
-	bset		&aunfl_bit,FPSR_AEXCEPT(%a6) # yes; set aunfl
-
-unf_res4_end:
-	add.l		&0x4,%sp		# clear stack
-	rts
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	ovf_res(): routine to produce the default overflow result of	#
-#		   an overflowing number.				#
-#	ovf_res2(): same as above but the rnd mode/prec are passed	#
-#		    differently.					#
-#									#
-# XREF ****************************************************************	#
-#	none								#
-#									#
-# INPUT ***************************************************************	#
-#	d1.b	= '-1' => (-); '0' => (+)				#
-#   ovf_res():								#
-#	d0	= rnd mode/prec						#
-#   ovf_res2():								#
-#	hi(d0)	= rnd prec						#
-#	lo(d0)	= rnd mode						#
-#									#
-# OUTPUT **************************************************************	#
-#	a0	= points to extended precision result			#
-#	d0.b	= condition code bits					#
-#									#
-# ALGORITHM ***********************************************************	#
-#	The default overflow result can be determined by the sign of	#
-# the result and the rounding mode/prec in effect. These bits are	#
-# concatenated together to create an index into the default result	#
-# table. A pointer to the correct result is returned in a0. The		#
-# resulting condition codes are returned in d0 in case the caller	#
-# doesn't want FPSR_cc altered (as is the case for fmove out).		#
-#									#
-#########################################################################
-
-	global		ovf_res
-ovf_res:
-	andi.w		&0x10,%d1		# keep result sign
-	lsr.b		&0x4,%d0		# shift prec/mode
-	or.b		%d0,%d1			# concat the two
-	mov.w		%d1,%d0			# make a copy
-	lsl.b		&0x1,%d1		# multiply d1 by 2
-	bra.b		ovf_res_load
-
-	global		ovf_res2
-ovf_res2:
-	and.w		&0x10, %d1		# keep result sign
-	or.b		%d0, %d1		# insert rnd mode
-	swap		%d0
-	or.b		%d0, %d1		# insert rnd prec
-	mov.w		%d1, %d0		# make a copy
-	lsl.b		&0x1, %d1		# shift left by 1
-
-#
-# use the rounding mode, precision, and result sign as in index into the
-# two tables below to fetch the default result and the result ccodes.
-#
-ovf_res_load:
-	mov.b		(tbl_ovfl_cc.b,%pc,%d0.w*1), %d0 # fetch result ccodes
-	lea		(tbl_ovfl_result.b,%pc,%d1.w*8), %a0 # return result ptr
-
-	rts
-
-tbl_ovfl_cc:
-	byte		0x2, 0x0, 0x0, 0x2
-	byte		0x2, 0x0, 0x0, 0x2
-	byte		0x2, 0x0, 0x0, 0x2
-	byte		0x0, 0x0, 0x0, 0x0
-	byte		0x2+0x8, 0x8, 0x2+0x8, 0x8
-	byte		0x2+0x8, 0x8, 0x2+0x8, 0x8
-	byte		0x2+0x8, 0x8, 0x2+0x8, 0x8
-
-tbl_ovfl_result:
-	long		0x7fff0000,0x00000000,0x00000000,0x00000000 # +INF; RN
-	long		0x7ffe0000,0xffffffff,0xffffffff,0x00000000 # +EXT; RZ
-	long		0x7ffe0000,0xffffffff,0xffffffff,0x00000000 # +EXT; RM
-	long		0x7fff0000,0x00000000,0x00000000,0x00000000 # +INF; RP
-
-	long		0x7fff0000,0x00000000,0x00000000,0x00000000 # +INF; RN
-	long		0x407e0000,0xffffff00,0x00000000,0x00000000 # +SGL; RZ
-	long		0x407e0000,0xffffff00,0x00000000,0x00000000 # +SGL; RM
-	long		0x7fff0000,0x00000000,0x00000000,0x00000000 # +INF; RP
-
-	long		0x7fff0000,0x00000000,0x00000000,0x00000000 # +INF; RN
-	long		0x43fe0000,0xffffffff,0xfffff800,0x00000000 # +DBL; RZ
-	long		0x43fe0000,0xffffffff,0xfffff800,0x00000000 # +DBL; RM
-	long		0x7fff0000,0x00000000,0x00000000,0x00000000 # +INF; RP
-
-	long		0x00000000,0x00000000,0x00000000,0x00000000
-	long		0x00000000,0x00000000,0x00000000,0x00000000
-	long		0x00000000,0x00000000,0x00000000,0x00000000
-	long		0x00000000,0x00000000,0x00000000,0x00000000
-
-	long		0xffff0000,0x00000000,0x00000000,0x00000000 # -INF; RN
-	long		0xfffe0000,0xffffffff,0xffffffff,0x00000000 # -EXT; RZ
-	long		0xffff0000,0x00000000,0x00000000,0x00000000 # -INF; RM
-	long		0xfffe0000,0xffffffff,0xffffffff,0x00000000 # -EXT; RP
-
-	long		0xffff0000,0x00000000,0x00000000,0x00000000 # -INF; RN
-	long		0xc07e0000,0xffffff00,0x00000000,0x00000000 # -SGL; RZ
-	long		0xffff0000,0x00000000,0x00000000,0x00000000 # -INF; RM
-	long		0xc07e0000,0xffffff00,0x00000000,0x00000000 # -SGL; RP
-
-	long		0xffff0000,0x00000000,0x00000000,0x00000000 # -INF; RN
-	long		0xc3fe0000,0xffffffff,0xfffff800,0x00000000 # -DBL; RZ
-	long		0xffff0000,0x00000000,0x00000000,0x00000000 # -INF; RM
-	long		0xc3fe0000,0xffffffff,0xfffff800,0x00000000 # -DBL; RP
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	fout(): move from fp register to memory or data register	#
-#									#
-# XREF ****************************************************************	#
-#	_round() - needed to create EXOP for sgl/dbl precision		#
-#	norm() - needed to create EXOP for extended precision		#
-#	ovf_res() - create default overflow result for sgl/dbl precision#
-#	unf_res() - create default underflow result for sgl/dbl prec.	#
-#	dst_dbl() - create rounded dbl precision result.		#
-#	dst_sgl() - create rounded sgl precision result.		#
-#	fetch_dreg() - fetch dynamic k-factor reg for packed.		#
-#	bindec() - convert FP binary number to packed number.		#
-#	_mem_write() - write data to memory.				#
-#	_mem_write2() - write data to memory unless supv mode -(a7) exc.#
-#	_dmem_write_{byte,word,long}() - write data to memory.		#
-#	store_dreg_{b,w,l}() - store data to data register file.	#
-#	facc_out_{b,w,l,d,x}() - data access error occurred.		#
-#									#
-# INPUT ***************************************************************	#
-#	a0 = pointer to extended precision source operand		#
-#	d0 = round prec,mode						#
-#									#
-# OUTPUT **************************************************************	#
-#	fp0 : intermediate underflow or overflow result if		#
-#	      OVFL/UNFL occurred for a sgl or dbl operand		#
-#									#
-# ALGORITHM ***********************************************************	#
-#	This routine is accessed by many handlers that need to do an	#
-# opclass three move of an operand out to memory.			#
-#	Decode an fmove out (opclass 3) instruction to determine if	#
-# it's b,w,l,s,d,x, or p in size. b,w,l can be stored to either a data	#
-# register or memory. The algorithm uses a standard "fmove" to create	#
-# the rounded result. Also, since exceptions are disabled, this also	#
-# create the correct OPERR default result if appropriate.		#
-#	For sgl or dbl precision, overflow or underflow can occur. If	#
-# either occurs and is enabled, the EXOP.				#
-#	For extended precision, the stacked <ea> must be fixed along	#
-# w/ the address index register as appropriate w/ _calc_ea_fout(). If	#
-# the source is a denorm and if underflow is enabled, an EXOP must be	#
-# created.								#
-#	For packed, the k-factor must be fetched from the instruction	#
-# word or a data register. The <ea> must be fixed as w/ extended	#
-# precision. Then, bindec() is called to create the appropriate		#
-# packed result.							#
-#	If at any time an access error is flagged by one of the move-	#
-# to-memory routines, then a special exit must be made so that the	#
-# access error can be handled properly.					#
-#									#
-#########################################################################
-
-	global		fout
-fout:
-	bfextu		EXC_CMDREG(%a6){&3:&3},%d1 # extract dst fmt
-	mov.w		(tbl_fout.b,%pc,%d1.w*2),%a1 # use as index
-	jmp		(tbl_fout.b,%pc,%a1)	# jump to routine
-
-	swbeg		&0x8
-tbl_fout:
-	short		fout_long	-	tbl_fout
-	short		fout_sgl	-	tbl_fout
-	short		fout_ext	-	tbl_fout
-	short		fout_pack	-	tbl_fout
-	short		fout_word	-	tbl_fout
-	short		fout_dbl	-	tbl_fout
-	short		fout_byte	-	tbl_fout
-	short		fout_pack	-	tbl_fout
-
-#################################################################
-# fmove.b out ###################################################
-#################################################################
-
-# Only "Unimplemented Data Type" exceptions enter here. The operand
-# is either a DENORM or a NORM.
-fout_byte:
-	tst.b		STAG(%a6)		# is operand normalized?
-	bne.b		fout_byte_denorm	# no
-
-	fmovm.x		SRC(%a0),&0x80		# load value
-
-fout_byte_norm:
-	fmov.l		%d0,%fpcr		# insert rnd prec,mode
-
-	fmov.b		%fp0,%d0		# exec move out w/ correct rnd mode
-
-	fmov.l		&0x0,%fpcr		# clear FPCR
-	fmov.l		%fpsr,%d1		# fetch FPSR
-	or.w		%d1,2+USER_FPSR(%a6)	# save new exc,accrued bits
-
-	mov.b		1+EXC_OPWORD(%a6),%d1	# extract dst mode
-	andi.b		&0x38,%d1		# is mode == 0? (Dreg dst)
-	beq.b		fout_byte_dn		# must save to integer regfile
-
-	mov.l		EXC_EA(%a6),%a0		# stacked <ea> is correct
-	bsr.l		_dmem_write_byte	# write byte
-
-	tst.l		%d1			# did dstore fail?
-	bne.l		facc_out_b		# yes
-
-	rts
-
-fout_byte_dn:
-	mov.b		1+EXC_OPWORD(%a6),%d1	# extract Dn
-	andi.w		&0x7,%d1
-	bsr.l		store_dreg_b
-	rts
-
-fout_byte_denorm:
-	mov.l		SRC_EX(%a0),%d1
-	andi.l		&0x80000000,%d1		# keep DENORM sign
-	ori.l		&0x00800000,%d1		# make smallest sgl
-	fmov.s		%d1,%fp0
-	bra.b		fout_byte_norm
-
-#################################################################
-# fmove.w out ###################################################
-#################################################################
-
-# Only "Unimplemented Data Type" exceptions enter here. The operand
-# is either a DENORM or a NORM.
-fout_word:
-	tst.b		STAG(%a6)		# is operand normalized?
-	bne.b		fout_word_denorm	# no
-
-	fmovm.x		SRC(%a0),&0x80		# load value
-
-fout_word_norm:
-	fmov.l		%d0,%fpcr		# insert rnd prec:mode
-
-	fmov.w		%fp0,%d0		# exec move out w/ correct rnd mode
-
-	fmov.l		&0x0,%fpcr		# clear FPCR
-	fmov.l		%fpsr,%d1		# fetch FPSR
-	or.w		%d1,2+USER_FPSR(%a6)	# save new exc,accrued bits
-
-	mov.b		1+EXC_OPWORD(%a6),%d1	# extract dst mode
-	andi.b		&0x38,%d1		# is mode == 0? (Dreg dst)
-	beq.b		fout_word_dn		# must save to integer regfile
-
-	mov.l		EXC_EA(%a6),%a0		# stacked <ea> is correct
-	bsr.l		_dmem_write_word	# write word
-
-	tst.l		%d1			# did dstore fail?
-	bne.l		facc_out_w		# yes
-
-	rts
-
-fout_word_dn:
-	mov.b		1+EXC_OPWORD(%a6),%d1	# extract Dn
-	andi.w		&0x7,%d1
-	bsr.l		store_dreg_w
-	rts
-
-fout_word_denorm:
-	mov.l		SRC_EX(%a0),%d1
-	andi.l		&0x80000000,%d1		# keep DENORM sign
-	ori.l		&0x00800000,%d1		# make smallest sgl
-	fmov.s		%d1,%fp0
-	bra.b		fout_word_norm
-
-#################################################################
-# fmove.l out ###################################################
-#################################################################
-
-# Only "Unimplemented Data Type" exceptions enter here. The operand
-# is either a DENORM or a NORM.
-fout_long:
-	tst.b		STAG(%a6)		# is operand normalized?
-	bne.b		fout_long_denorm	# no
-
-	fmovm.x		SRC(%a0),&0x80		# load value
-
-fout_long_norm:
-	fmov.l		%d0,%fpcr		# insert rnd prec:mode
-
-	fmov.l		%fp0,%d0		# exec move out w/ correct rnd mode
-
-	fmov.l		&0x0,%fpcr		# clear FPCR
-	fmov.l		%fpsr,%d1		# fetch FPSR
-	or.w		%d1,2+USER_FPSR(%a6)	# save new exc,accrued bits
-
-fout_long_write:
-	mov.b		1+EXC_OPWORD(%a6),%d1	# extract dst mode
-	andi.b		&0x38,%d1		# is mode == 0? (Dreg dst)
-	beq.b		fout_long_dn		# must save to integer regfile
-
-	mov.l		EXC_EA(%a6),%a0		# stacked <ea> is correct
-	bsr.l		_dmem_write_long	# write long
-
-	tst.l		%d1			# did dstore fail?
-	bne.l		facc_out_l		# yes
-
-	rts
-
-fout_long_dn:
-	mov.b		1+EXC_OPWORD(%a6),%d1	# extract Dn
-	andi.w		&0x7,%d1
-	bsr.l		store_dreg_l
-	rts
-
-fout_long_denorm:
-	mov.l		SRC_EX(%a0),%d1
-	andi.l		&0x80000000,%d1		# keep DENORM sign
-	ori.l		&0x00800000,%d1		# make smallest sgl
-	fmov.s		%d1,%fp0
-	bra.b		fout_long_norm
-
-#################################################################
-# fmove.x out ###################################################
-#################################################################
-
-# Only "Unimplemented Data Type" exceptions enter here. The operand
-# is either a DENORM or a NORM.
-# The DENORM causes an Underflow exception.
-fout_ext:
-
-# we copy the extended precision result to FP_SCR0 so that the reserved
-# 16-bit field gets zeroed. we do this since we promise not to disturb
-# what's at SRC(a0).
-	mov.w		SRC_EX(%a0),FP_SCR0_EX(%a6)
-	clr.w		2+FP_SCR0_EX(%a6)	# clear reserved field
-	mov.l		SRC_HI(%a0),FP_SCR0_HI(%a6)
-	mov.l		SRC_LO(%a0),FP_SCR0_LO(%a6)
-
-	fmovm.x		SRC(%a0),&0x80		# return result
-
-	bsr.l		_calc_ea_fout		# fix stacked <ea>
-
-	mov.l		%a0,%a1			# pass: dst addr
-	lea		FP_SCR0(%a6),%a0	# pass: src addr
-	mov.l		&0xc,%d0		# pass: opsize is 12 bytes
-
-# we must not yet write the extended precision data to the stack
-# in the pre-decrement case from supervisor mode or else we'll corrupt
-# the stack frame. so, leave it in FP_SRC for now and deal with it later...
-	cmpi.b		SPCOND_FLG(%a6),&mda7_flg
-	beq.b		fout_ext_a7
-
-	bsr.l		_dmem_write		# write ext prec number to memory
-
-	tst.l		%d1			# did dstore fail?
-	bne.w		fout_ext_err		# yes
-
-	tst.b		STAG(%a6)		# is operand normalized?
-	bne.b		fout_ext_denorm		# no
-	rts
-
-# the number is a DENORM. must set the underflow exception bit
-fout_ext_denorm:
-	bset		&unfl_bit,FPSR_EXCEPT(%a6) # set underflow exc bit
-
-	mov.b		FPCR_ENABLE(%a6),%d0
-	andi.b		&0x0a,%d0		# is UNFL or INEX enabled?
-	bne.b		fout_ext_exc		# yes
-	rts
-
-# we don't want to do the write if the exception occurred in supervisor mode
-# so _mem_write2() handles this for us.
-fout_ext_a7:
-	bsr.l		_mem_write2		# write ext prec number to memory
-
-	tst.l		%d1			# did dstore fail?
-	bne.w		fout_ext_err		# yes
-
-	tst.b		STAG(%a6)		# is operand normalized?
-	bne.b		fout_ext_denorm		# no
-	rts
-
-fout_ext_exc:
-	lea		FP_SCR0(%a6),%a0
-	bsr.l		norm			# normalize the mantissa
-	neg.w		%d0			# new exp = -(shft amt)
-	andi.w		&0x7fff,%d0
-	andi.w		&0x8000,FP_SCR0_EX(%a6)	# keep only old sign
-	or.w		%d0,FP_SCR0_EX(%a6)	# insert new exponent
-	fmovm.x		FP_SCR0(%a6),&0x40	# return EXOP in fp1
-	rts
-
-fout_ext_err:
-	mov.l		EXC_A6(%a6),(%a6)	# fix stacked a6
-	bra.l		facc_out_x
-
-#########################################################################
-# fmove.s out ###########################################################
-#########################################################################
-fout_sgl:
-	andi.b		&0x30,%d0		# clear rnd prec
-	ori.b		&s_mode*0x10,%d0	# insert sgl prec
-	mov.l		%d0,L_SCR3(%a6)		# save rnd prec,mode on stack
-
-#
-# operand is a normalized number. first, we check to see if the move out
-# would cause either an underflow or overflow. these cases are handled
-# separately. otherwise, set the FPCR to the proper rounding mode and
-# execute the move.
-#
-	mov.w		SRC_EX(%a0),%d0		# extract exponent
-	andi.w		&0x7fff,%d0		# strip sign
-
-	cmpi.w		%d0,&SGL_HI		# will operand overflow?
-	bgt.w		fout_sgl_ovfl		# yes; go handle OVFL
-	beq.w		fout_sgl_may_ovfl	# maybe; go handle possible OVFL
-	cmpi.w		%d0,&SGL_LO		# will operand underflow?
-	blt.w		fout_sgl_unfl		# yes; go handle underflow
-
-#
-# NORMs(in range) can be stored out by a simple "fmov.s"
-# Unnormalized inputs can come through this point.
-#
-fout_sgl_exg:
-	fmovm.x		SRC(%a0),&0x80		# fetch fop from stack
-
-	fmov.l		L_SCR3(%a6),%fpcr	# set FPCR
-	fmov.l		&0x0,%fpsr		# clear FPSR
-
-	fmov.s		%fp0,%d0		# store does convert and round
-
-	fmov.l		&0x0,%fpcr		# clear FPCR
-	fmov.l		%fpsr,%d1		# save FPSR
-
-	or.w		%d1,2+USER_FPSR(%a6)	# set possible inex2/ainex
-
-fout_sgl_exg_write:
-	mov.b		1+EXC_OPWORD(%a6),%d1	# extract dst mode
-	andi.b		&0x38,%d1		# is mode == 0? (Dreg dst)
-	beq.b		fout_sgl_exg_write_dn	# must save to integer regfile
-
-	mov.l		EXC_EA(%a6),%a0		# stacked <ea> is correct
-	bsr.l		_dmem_write_long	# write long
-
-	tst.l		%d1			# did dstore fail?
-	bne.l		facc_out_l		# yes
-
-	rts
-
-fout_sgl_exg_write_dn:
-	mov.b		1+EXC_OPWORD(%a6),%d1	# extract Dn
-	andi.w		&0x7,%d1
-	bsr.l		store_dreg_l
-	rts
-
-#
-# here, we know that the operand would UNFL if moved out to single prec,
-# so, denorm and round and then use generic store single routine to
-# write the value to memory.
-#
-fout_sgl_unfl:
-	bset		&unfl_bit,FPSR_EXCEPT(%a6) # set UNFL
-
-	mov.w		SRC_EX(%a0),FP_SCR0_EX(%a6)
-	mov.l		SRC_HI(%a0),FP_SCR0_HI(%a6)
-	mov.l		SRC_LO(%a0),FP_SCR0_LO(%a6)
-	mov.l		%a0,-(%sp)
-
-	clr.l		%d0			# pass: S.F. = 0
-
-	cmpi.b		STAG(%a6),&DENORM	# fetch src optype tag
-	bne.b		fout_sgl_unfl_cont	# let DENORMs fall through
-
-	lea		FP_SCR0(%a6),%a0
-	bsr.l		norm			# normalize the DENORM
-
-fout_sgl_unfl_cont:
-	lea		FP_SCR0(%a6),%a0	# pass: ptr to operand
-	mov.l		L_SCR3(%a6),%d1		# pass: rnd prec,mode
-	bsr.l		unf_res			# calc default underflow result
-
-	lea		FP_SCR0(%a6),%a0	# pass: ptr to fop
-	bsr.l		dst_sgl			# convert to single prec
-
-	mov.b		1+EXC_OPWORD(%a6),%d1	# extract dst mode
-	andi.b		&0x38,%d1		# is mode == 0? (Dreg dst)
-	beq.b		fout_sgl_unfl_dn	# must save to integer regfile
-
-	mov.l		EXC_EA(%a6),%a0		# stacked <ea> is correct
-	bsr.l		_dmem_write_long	# write long
-
-	tst.l		%d1			# did dstore fail?
-	bne.l		facc_out_l		# yes
-
-	bra.b		fout_sgl_unfl_chkexc
-
-fout_sgl_unfl_dn:
-	mov.b		1+EXC_OPWORD(%a6),%d1	# extract Dn
-	andi.w		&0x7,%d1
-	bsr.l		store_dreg_l
-
-fout_sgl_unfl_chkexc:
-	mov.b		FPCR_ENABLE(%a6),%d1
-	andi.b		&0x0a,%d1		# is UNFL or INEX enabled?
-	bne.w		fout_sd_exc_unfl	# yes
-	addq.l		&0x4,%sp
-	rts
-
-#
-# it's definitely an overflow so call ovf_res to get the correct answer
-#
-fout_sgl_ovfl:
-	tst.b		3+SRC_HI(%a0)		# is result inexact?
-	bne.b		fout_sgl_ovfl_inex2
-	tst.l		SRC_LO(%a0)		# is result inexact?
-	bne.b		fout_sgl_ovfl_inex2
-	ori.w		&ovfl_inx_mask,2+USER_FPSR(%a6) # set ovfl/aovfl/ainex
-	bra.b		fout_sgl_ovfl_cont
-fout_sgl_ovfl_inex2:
-	ori.w		&ovfinx_mask,2+USER_FPSR(%a6) # set ovfl/aovfl/ainex/inex2
-
-fout_sgl_ovfl_cont:
-	mov.l		%a0,-(%sp)
-
-# call ovf_res() w/ sgl prec and the correct rnd mode to create the default
-# overflow result. DON'T save the returned ccodes from ovf_res() since
-# fmove out doesn't alter them.
-	tst.b		SRC_EX(%a0)		# is operand negative?
-	smi		%d1			# set if so
-	mov.l		L_SCR3(%a6),%d0		# pass: sgl prec,rnd mode
-	bsr.l		ovf_res			# calc OVFL result
-	fmovm.x		(%a0),&0x80		# load default overflow result
-	fmov.s		%fp0,%d0		# store to single
-
-	mov.b		1+EXC_OPWORD(%a6),%d1	# extract dst mode
-	andi.b		&0x38,%d1		# is mode == 0? (Dreg dst)
-	beq.b		fout_sgl_ovfl_dn	# must save to integer regfile
-
-	mov.l		EXC_EA(%a6),%a0		# stacked <ea> is correct
-	bsr.l		_dmem_write_long	# write long
-
-	tst.l		%d1			# did dstore fail?
-	bne.l		facc_out_l		# yes
-
-	bra.b		fout_sgl_ovfl_chkexc
-
-fout_sgl_ovfl_dn:
-	mov.b		1+EXC_OPWORD(%a6),%d1	# extract Dn
-	andi.w		&0x7,%d1
-	bsr.l		store_dreg_l
-
-fout_sgl_ovfl_chkexc:
-	mov.b		FPCR_ENABLE(%a6),%d1
-	andi.b		&0x0a,%d1		# is UNFL or INEX enabled?
-	bne.w		fout_sd_exc_ovfl	# yes
-	addq.l		&0x4,%sp
-	rts
-
-#
-# move out MAY overflow:
-# (1) force the exp to 0x3fff
-# (2) do a move w/ appropriate rnd mode
-# (3) if exp still equals zero, then insert original exponent
-#	for the correct result.
-#     if exp now equals one, then it overflowed so call ovf_res.
-#
-fout_sgl_may_ovfl:
-	mov.w		SRC_EX(%a0),%d1		# fetch current sign
-	andi.w		&0x8000,%d1		# keep it,clear exp
-	ori.w		&0x3fff,%d1		# insert exp = 0
-	mov.w		%d1,FP_SCR0_EX(%a6)	# insert scaled exp
-	mov.l		SRC_HI(%a0),FP_SCR0_HI(%a6) # copy hi(man)
-	mov.l		SRC_LO(%a0),FP_SCR0_LO(%a6) # copy lo(man)
-
-	fmov.l		L_SCR3(%a6),%fpcr	# set FPCR
-
-	fmov.x		FP_SCR0(%a6),%fp0	# force fop to be rounded
-	fmov.l		&0x0,%fpcr		# clear FPCR
-
-	fabs.x		%fp0			# need absolute value
-	fcmp.b		%fp0,&0x2		# did exponent increase?
-	fblt.w		fout_sgl_exg		# no; go finish NORM
-	bra.w		fout_sgl_ovfl		# yes; go handle overflow
-
-################
-
-fout_sd_exc_unfl:
-	mov.l		(%sp)+,%a0
-
-	mov.w		SRC_EX(%a0),FP_SCR0_EX(%a6)
-	mov.l		SRC_HI(%a0),FP_SCR0_HI(%a6)
-	mov.l		SRC_LO(%a0),FP_SCR0_LO(%a6)
-
-	cmpi.b		STAG(%a6),&DENORM	# was src a DENORM?
-	bne.b		fout_sd_exc_cont	# no
-
-	lea		FP_SCR0(%a6),%a0
-	bsr.l		norm
-	neg.l		%d0
-	andi.w		&0x7fff,%d0
-	bfins		%d0,FP_SCR0_EX(%a6){&1:&15}
-	bra.b		fout_sd_exc_cont
-
-fout_sd_exc:
-fout_sd_exc_ovfl:
-	mov.l		(%sp)+,%a0		# restore a0
-
-	mov.w		SRC_EX(%a0),FP_SCR0_EX(%a6)
-	mov.l		SRC_HI(%a0),FP_SCR0_HI(%a6)
-	mov.l		SRC_LO(%a0),FP_SCR0_LO(%a6)
-
-fout_sd_exc_cont:
-	bclr		&0x7,FP_SCR0_EX(%a6)	# clear sign bit
-	sne.b		2+FP_SCR0_EX(%a6)	# set internal sign bit
-	lea		FP_SCR0(%a6),%a0	# pass: ptr to DENORM
-
-	mov.b		3+L_SCR3(%a6),%d1
-	lsr.b		&0x4,%d1
-	andi.w		&0x0c,%d1
-	swap		%d1
-	mov.b		3+L_SCR3(%a6),%d1
-	lsr.b		&0x4,%d1
-	andi.w		&0x03,%d1
-	clr.l		%d0			# pass: zero g,r,s
-	bsr.l		_round			# round the DENORM
-
-	tst.b		2+FP_SCR0_EX(%a6)	# is EXOP negative?
-	beq.b		fout_sd_exc_done	# no
-	bset		&0x7,FP_SCR0_EX(%a6)	# yes
-
-fout_sd_exc_done:
-	fmovm.x		FP_SCR0(%a6),&0x40	# return EXOP in fp1
-	rts
-
-#################################################################
-# fmove.d out ###################################################
-#################################################################
-fout_dbl:
-	andi.b		&0x30,%d0		# clear rnd prec
-	ori.b		&d_mode*0x10,%d0	# insert dbl prec
-	mov.l		%d0,L_SCR3(%a6)		# save rnd prec,mode on stack
-
-#
-# operand is a normalized number. first, we check to see if the move out
-# would cause either an underflow or overflow. these cases are handled
-# separately. otherwise, set the FPCR to the proper rounding mode and
-# execute the move.
-#
-	mov.w		SRC_EX(%a0),%d0		# extract exponent
-	andi.w		&0x7fff,%d0		# strip sign
-
-	cmpi.w		%d0,&DBL_HI		# will operand overflow?
-	bgt.w		fout_dbl_ovfl		# yes; go handle OVFL
-	beq.w		fout_dbl_may_ovfl	# maybe; go handle possible OVFL
-	cmpi.w		%d0,&DBL_LO		# will operand underflow?
-	blt.w		fout_dbl_unfl		# yes; go handle underflow
-
-#
-# NORMs(in range) can be stored out by a simple "fmov.d"
-# Unnormalized inputs can come through this point.
-#
-fout_dbl_exg:
-	fmovm.x		SRC(%a0),&0x80		# fetch fop from stack
-
-	fmov.l		L_SCR3(%a6),%fpcr	# set FPCR
-	fmov.l		&0x0,%fpsr		# clear FPSR
-
-	fmov.d		%fp0,L_SCR1(%a6)	# store does convert and round
-
-	fmov.l		&0x0,%fpcr		# clear FPCR
-	fmov.l		%fpsr,%d0		# save FPSR
-
-	or.w		%d0,2+USER_FPSR(%a6)	# set possible inex2/ainex
-
-	mov.l		EXC_EA(%a6),%a1		# pass: dst addr
-	lea		L_SCR1(%a6),%a0		# pass: src addr
-	movq.l		&0x8,%d0		# pass: opsize is 8 bytes
-	bsr.l		_dmem_write		# store dbl fop to memory
-
-	tst.l		%d1			# did dstore fail?
-	bne.l		facc_out_d		# yes
-
-	rts					# no; so we're finished
-
-#
-# here, we know that the operand would UNFL if moved out to double prec,
-# so, denorm and round and then use generic store double routine to
-# write the value to memory.
-#
-fout_dbl_unfl:
-	bset		&unfl_bit,FPSR_EXCEPT(%a6) # set UNFL
-
-	mov.w		SRC_EX(%a0),FP_SCR0_EX(%a6)
-	mov.l		SRC_HI(%a0),FP_SCR0_HI(%a6)
-	mov.l		SRC_LO(%a0),FP_SCR0_LO(%a6)
-	mov.l		%a0,-(%sp)
-
-	clr.l		%d0			# pass: S.F. = 0
-
-	cmpi.b		STAG(%a6),&DENORM	# fetch src optype tag
-	bne.b		fout_dbl_unfl_cont	# let DENORMs fall through
-
-	lea		FP_SCR0(%a6),%a0
-	bsr.l		norm			# normalize the DENORM
-
-fout_dbl_unfl_cont:
-	lea		FP_SCR0(%a6),%a0	# pass: ptr to operand
-	mov.l		L_SCR3(%a6),%d1		# pass: rnd prec,mode
-	bsr.l		unf_res			# calc default underflow result
-
-	lea		FP_SCR0(%a6),%a0	# pass: ptr to fop
-	bsr.l		dst_dbl			# convert to single prec
-	mov.l		%d0,L_SCR1(%a6)
-	mov.l		%d1,L_SCR2(%a6)
-
-	mov.l		EXC_EA(%a6),%a1		# pass: dst addr
-	lea		L_SCR1(%a6),%a0		# pass: src addr
-	movq.l		&0x8,%d0		# pass: opsize is 8 bytes
-	bsr.l		_dmem_write		# store dbl fop to memory
-
-	tst.l		%d1			# did dstore fail?
-	bne.l		facc_out_d		# yes
-
-	mov.b		FPCR_ENABLE(%a6),%d1
-	andi.b		&0x0a,%d1		# is UNFL or INEX enabled?
-	bne.w		fout_sd_exc_unfl	# yes
-	addq.l		&0x4,%sp
-	rts
-
-#
-# it's definitely an overflow so call ovf_res to get the correct answer
-#
-fout_dbl_ovfl:
-	mov.w		2+SRC_LO(%a0),%d0
-	andi.w		&0x7ff,%d0
-	bne.b		fout_dbl_ovfl_inex2
-
-	ori.w		&ovfl_inx_mask,2+USER_FPSR(%a6) # set ovfl/aovfl/ainex
-	bra.b		fout_dbl_ovfl_cont
-fout_dbl_ovfl_inex2:
-	ori.w		&ovfinx_mask,2+USER_FPSR(%a6) # set ovfl/aovfl/ainex/inex2
-
-fout_dbl_ovfl_cont:
-	mov.l		%a0,-(%sp)
-
-# call ovf_res() w/ dbl prec and the correct rnd mode to create the default
-# overflow result. DON'T save the returned ccodes from ovf_res() since
-# fmove out doesn't alter them.
-	tst.b		SRC_EX(%a0)		# is operand negative?
-	smi		%d1			# set if so
-	mov.l		L_SCR3(%a6),%d0		# pass: dbl prec,rnd mode
-	bsr.l		ovf_res			# calc OVFL result
-	fmovm.x		(%a0),&0x80		# load default overflow result
-	fmov.d		%fp0,L_SCR1(%a6)	# store to double
-
-	mov.l		EXC_EA(%a6),%a1		# pass: dst addr
-	lea		L_SCR1(%a6),%a0		# pass: src addr
-	movq.l		&0x8,%d0		# pass: opsize is 8 bytes
-	bsr.l		_dmem_write		# store dbl fop to memory
-
-	tst.l		%d1			# did dstore fail?
-	bne.l		facc_out_d		# yes
-
-	mov.b		FPCR_ENABLE(%a6),%d1
-	andi.b		&0x0a,%d1		# is UNFL or INEX enabled?
-	bne.w		fout_sd_exc_ovfl	# yes
-	addq.l		&0x4,%sp
-	rts
-
-#
-# move out MAY overflow:
-# (1) force the exp to 0x3fff
-# (2) do a move w/ appropriate rnd mode
-# (3) if exp still equals zero, then insert original exponent
-#	for the correct result.
-#     if exp now equals one, then it overflowed so call ovf_res.
-#
-fout_dbl_may_ovfl:
-	mov.w		SRC_EX(%a0),%d1		# fetch current sign
-	andi.w		&0x8000,%d1		# keep it,clear exp
-	ori.w		&0x3fff,%d1		# insert exp = 0
-	mov.w		%d1,FP_SCR0_EX(%a6)	# insert scaled exp
-	mov.l		SRC_HI(%a0),FP_SCR0_HI(%a6) # copy hi(man)
-	mov.l		SRC_LO(%a0),FP_SCR0_LO(%a6) # copy lo(man)
-
-	fmov.l		L_SCR3(%a6),%fpcr	# set FPCR
-
-	fmov.x		FP_SCR0(%a6),%fp0	# force fop to be rounded
-	fmov.l		&0x0,%fpcr		# clear FPCR
-
-	fabs.x		%fp0			# need absolute value
-	fcmp.b		%fp0,&0x2		# did exponent increase?
-	fblt.w		fout_dbl_exg		# no; go finish NORM
-	bra.w		fout_dbl_ovfl		# yes; go handle overflow
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	dst_dbl(): create double precision value from extended prec.	#
-#									#
-# XREF ****************************************************************	#
-#	None								#
-#									#
-# INPUT ***************************************************************	#
-#	a0 = pointer to source operand in extended precision		#
-#									#
-# OUTPUT **************************************************************	#
-#	d0 = hi(double precision result)				#
-#	d1 = lo(double precision result)				#
-#									#
-# ALGORITHM ***********************************************************	#
-#									#
-#  Changes extended precision to double precision.			#
-#  Note: no attempt is made to round the extended value to double.	#
-#	dbl_sign = ext_sign						#
-#	dbl_exp = ext_exp - $3fff(ext bias) + $7ff(dbl bias)		#
-#	get rid of ext integer bit					#
-#	dbl_mant = ext_mant{62:12}					#
-#									#
-#		---------------   ---------------    ---------------	#
-#  extended ->  |s|    exp    |   |1| ms mant   |    | ls mant     |	#
-#		---------------   ---------------    ---------------	#
-#		 95	    64    63 62	      32      31     11	  0	#
-#				     |			     |		#
-#				     |			     |		#
-#				     |			     |		#
-#			             v			     v		#
-#			      ---------------   ---------------		#
-#  double   ->		      |s|exp| mant  |   |  mant       |		#
-#			      ---------------   ---------------		#
-#			      63     51   32   31	       0	#
-#									#
-#########################################################################
-
-dst_dbl:
-	clr.l		%d0			# clear d0
-	mov.w		FTEMP_EX(%a0),%d0	# get exponent
-	subi.w		&EXT_BIAS,%d0		# subtract extended precision bias
-	addi.w		&DBL_BIAS,%d0		# add double precision bias
-	tst.b		FTEMP_HI(%a0)		# is number a denorm?
-	bmi.b		dst_get_dupper		# no
-	subq.w		&0x1,%d0		# yes; denorm bias = DBL_BIAS - 1
-dst_get_dupper:
-	swap		%d0			# d0 now in upper word
-	lsl.l		&0x4,%d0		# d0 in proper place for dbl prec exp
-	tst.b		FTEMP_EX(%a0)		# test sign
-	bpl.b		dst_get_dman		# if positive, go process mantissa
-	bset		&0x1f,%d0		# if negative, set sign
-dst_get_dman:
-	mov.l		FTEMP_HI(%a0),%d1	# get ms mantissa
-	bfextu		%d1{&1:&20},%d1		# get upper 20 bits of ms
-	or.l		%d1,%d0			# put these bits in ms word of double
-	mov.l		%d0,L_SCR1(%a6)		# put the new exp back on the stack
-	mov.l		FTEMP_HI(%a0),%d1	# get ms mantissa
-	mov.l		&21,%d0			# load shift count
-	lsl.l		%d0,%d1			# put lower 11 bits in upper bits
-	mov.l		%d1,L_SCR2(%a6)		# build lower lword in memory
-	mov.l		FTEMP_LO(%a0),%d1	# get ls mantissa
-	bfextu		%d1{&0:&21},%d0		# get ls 21 bits of double
-	mov.l		L_SCR2(%a6),%d1
-	or.l		%d0,%d1			# put them in double result
-	mov.l		L_SCR1(%a6),%d0
-	rts
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	dst_sgl(): create single precision value from extended prec	#
-#									#
-# XREF ****************************************************************	#
-#									#
-# INPUT ***************************************************************	#
-#	a0 = pointer to source operand in extended precision		#
-#									#
-# OUTPUT **************************************************************	#
-#	d0 = single precision result					#
-#									#
-# ALGORITHM ***********************************************************	#
-#									#
-# Changes extended precision to single precision.			#
-#	sgl_sign = ext_sign						#
-#	sgl_exp = ext_exp - $3fff(ext bias) + $7f(sgl bias)		#
-#	get rid of ext integer bit					#
-#	sgl_mant = ext_mant{62:12}					#
-#									#
-#		---------------   ---------------    ---------------	#
-#  extended ->  |s|    exp    |   |1| ms mant   |    | ls mant     |	#
-#		---------------   ---------------    ---------------	#
-#		 95	    64    63 62	   40 32      31     12	  0	#
-#				     |	   |				#
-#				     |	   |				#
-#				     |	   |				#
-#			             v     v				#
-#			      ---------------				#
-#  single   ->		      |s|exp| mant  |				#
-#			      ---------------				#
-#			      31     22     0				#
-#									#
-#########################################################################
-
-dst_sgl:
-	clr.l		%d0
-	mov.w		FTEMP_EX(%a0),%d0	# get exponent
-	subi.w		&EXT_BIAS,%d0		# subtract extended precision bias
-	addi.w		&SGL_BIAS,%d0		# add single precision bias
-	tst.b		FTEMP_HI(%a0)		# is number a denorm?
-	bmi.b		dst_get_supper		# no
-	subq.w		&0x1,%d0		# yes; denorm bias = SGL_BIAS - 1
-dst_get_supper:
-	swap		%d0			# put exp in upper word of d0
-	lsl.l		&0x7,%d0		# shift it into single exp bits
-	tst.b		FTEMP_EX(%a0)		# test sign
-	bpl.b		dst_get_sman		# if positive, continue
-	bset		&0x1f,%d0		# if negative, put in sign first
-dst_get_sman:
-	mov.l		FTEMP_HI(%a0),%d1	# get ms mantissa
-	andi.l		&0x7fffff00,%d1		# get upper 23 bits of ms
-	lsr.l		&0x8,%d1		# and put them flush right
-	or.l		%d1,%d0			# put these bits in ms word of single
-	rts
-
-##############################################################################
-fout_pack:
-	bsr.l		_calc_ea_fout		# fetch the <ea>
-	mov.l		%a0,-(%sp)
-
-	mov.b		STAG(%a6),%d0		# fetch input type
-	bne.w		fout_pack_not_norm	# input is not NORM
-
-fout_pack_norm:
-	btst		&0x4,EXC_CMDREG(%a6)	# static or dynamic?
-	beq.b		fout_pack_s		# static
-
-fout_pack_d:
-	mov.b		1+EXC_CMDREG(%a6),%d1	# fetch dynamic reg
-	lsr.b		&0x4,%d1
-	andi.w		&0x7,%d1
-
-	bsr.l		fetch_dreg		# fetch Dn w/ k-factor
-
-	bra.b		fout_pack_type
-fout_pack_s:
-	mov.b		1+EXC_CMDREG(%a6),%d0	# fetch static field
-
-fout_pack_type:
-	bfexts		%d0{&25:&7},%d0		# extract k-factor
-	mov.l	%d0,-(%sp)
-
-	lea		FP_SRC(%a6),%a0		# pass: ptr to input
-
-# bindec is currently scrambling FP_SRC for denorm inputs.
-# we'll have to change this, but for now, tough luck!!!
-	bsr.l		bindec			# convert xprec to packed
-
-#	andi.l		&0xcfff000f,FP_SCR0(%a6) # clear unused fields
-	andi.l		&0xcffff00f,FP_SCR0(%a6) # clear unused fields
-
-	mov.l	(%sp)+,%d0
-
-	tst.b		3+FP_SCR0_EX(%a6)
-	bne.b		fout_pack_set
-	tst.l		FP_SCR0_HI(%a6)
-	bne.b		fout_pack_set
-	tst.l		FP_SCR0_LO(%a6)
-	bne.b		fout_pack_set
-
-# add the extra condition that only if the k-factor was zero, too, should
-# we zero the exponent
-	tst.l		%d0
-	bne.b		fout_pack_set
-# "mantissa" is all zero which means that the answer is zero. but, the '040
-# algorithm allows the exponent to be non-zero. the 881/2 do not. Therefore,
-# if the mantissa is zero, I will zero the exponent, too.
-# the question now is whether the exponents sign bit is allowed to be non-zero
-# for a zero, also...
-	andi.w		&0xf000,FP_SCR0(%a6)
-
-fout_pack_set:
-
-	lea		FP_SCR0(%a6),%a0	# pass: src addr
-
-fout_pack_write:
-	mov.l		(%sp)+,%a1		# pass: dst addr
-	mov.l		&0xc,%d0		# pass: opsize is 12 bytes
-
-	cmpi.b		SPCOND_FLG(%a6),&mda7_flg
-	beq.b		fout_pack_a7
-
-	bsr.l		_dmem_write		# write ext prec number to memory
-
-	tst.l		%d1			# did dstore fail?
-	bne.w		fout_ext_err		# yes
-
-	rts
-
-# we don't want to do the write if the exception occurred in supervisor mode
-# so _mem_write2() handles this for us.
-fout_pack_a7:
-	bsr.l		_mem_write2		# write ext prec number to memory
-
-	tst.l		%d1			# did dstore fail?
-	bne.w		fout_ext_err		# yes
-
-	rts
-
-fout_pack_not_norm:
-	cmpi.b		%d0,&DENORM		# is it a DENORM?
-	beq.w		fout_pack_norm		# yes
-	lea		FP_SRC(%a6),%a0
-	clr.w		2+FP_SRC_EX(%a6)
-	cmpi.b		%d0,&SNAN		# is it an SNAN?
-	beq.b		fout_pack_snan		# yes
-	bra.b		fout_pack_write		# no
-
-fout_pack_snan:
-	ori.w		&snaniop2_mask,FPSR_EXCEPT(%a6) # set SNAN/AIOP
-	bset		&0x6,FP_SRC_HI(%a6)	# set snan bit
-	bra.b		fout_pack_write
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	fmul(): emulates the fmul instruction				#
-#	fsmul(): emulates the fsmul instruction				#
-#	fdmul(): emulates the fdmul instruction				#
-#									#
-# XREF ****************************************************************	#
-#	scale_to_zero_src() - scale src exponent to zero		#
-#	scale_to_zero_dst() - scale dst exponent to zero		#
-#	unf_res() - return default underflow result			#
-#	ovf_res() - return default overflow result			#
-#	res_qnan() - return QNAN result					#
-#	res_snan() - return SNAN result					#
-#									#
-# INPUT ***************************************************************	#
-#	a0 = pointer to extended precision source operand		#
-#	a1 = pointer to extended precision destination operand		#
-#	d0  rnd prec,mode						#
-#									#
-# OUTPUT **************************************************************	#
-#	fp0 = result							#
-#	fp1 = EXOP (if exception occurred)				#
-#									#
-# ALGORITHM ***********************************************************	#
-#	Handle NANs, infinities, and zeroes as special cases. Divide	#
-# norms/denorms into ext/sgl/dbl precision.				#
-#	For norms/denorms, scale the exponents such that a multiply	#
-# instruction won't cause an exception. Use the regular fmul to		#
-# compute a result. Check if the regular operands would have taken	#
-# an exception. If so, return the default overflow/underflow result	#
-# and return the EXOP if exceptions are enabled. Else, scale the	#
-# result operand to the proper exponent.				#
-#									#
-#########################################################################
-
-	align		0x10
-tbl_fmul_ovfl:
-	long		0x3fff - 0x7ffe		# ext_max
-	long		0x3fff - 0x407e		# sgl_max
-	long		0x3fff - 0x43fe		# dbl_max
-tbl_fmul_unfl:
-	long		0x3fff + 0x0001		# ext_unfl
-	long		0x3fff - 0x3f80		# sgl_unfl
-	long		0x3fff - 0x3c00		# dbl_unfl
-
-	global		fsmul
-fsmul:
-	andi.b		&0x30,%d0		# clear rnd prec
-	ori.b		&s_mode*0x10,%d0	# insert sgl prec
-	bra.b		fmul
-
-	global		fdmul
-fdmul:
-	andi.b		&0x30,%d0
-	ori.b		&d_mode*0x10,%d0	# insert dbl prec
-
-	global		fmul
-fmul:
-	mov.l		%d0,L_SCR3(%a6)		# store rnd info
-
-	clr.w		%d1
-	mov.b		DTAG(%a6),%d1
-	lsl.b		&0x3,%d1
-	or.b		STAG(%a6),%d1		# combine src tags
-	bne.w		fmul_not_norm		# optimize on non-norm input
-
-fmul_norm:
-	mov.w		DST_EX(%a1),FP_SCR1_EX(%a6)
-	mov.l		DST_HI(%a1),FP_SCR1_HI(%a6)
-	mov.l		DST_LO(%a1),FP_SCR1_LO(%a6)
-
-	mov.w		SRC_EX(%a0),FP_SCR0_EX(%a6)
-	mov.l		SRC_HI(%a0),FP_SCR0_HI(%a6)
-	mov.l		SRC_LO(%a0),FP_SCR0_LO(%a6)
-
-	bsr.l		scale_to_zero_src	# scale src exponent
-	mov.l		%d0,-(%sp)		# save scale factor 1
-
-	bsr.l		scale_to_zero_dst	# scale dst exponent
-
-	add.l		%d0,(%sp)		# SCALE_FACTOR = scale1 + scale2
-
-	mov.w		2+L_SCR3(%a6),%d1	# fetch precision
-	lsr.b		&0x6,%d1		# shift to lo bits
-	mov.l		(%sp)+,%d0		# load S.F.
-	cmp.l		%d0,(tbl_fmul_ovfl.w,%pc,%d1.w*4) # would result ovfl?
-	beq.w		fmul_may_ovfl		# result may rnd to overflow
-	blt.w		fmul_ovfl		# result will overflow
-
-	cmp.l		%d0,(tbl_fmul_unfl.w,%pc,%d1.w*4) # would result unfl?
-	beq.w		fmul_may_unfl		# result may rnd to no unfl
-	bgt.w		fmul_unfl		# result will underflow
-
-#
-# NORMAL:
-# - the result of the multiply operation will neither overflow nor underflow.
-# - do the multiply to the proper precision and rounding mode.
-# - scale the result exponent using the scale factor. if both operands were
-# normalized then we really don't need to go through this scaling. but for now,
-# this will do.
-#
-fmul_normal:
-	fmovm.x		FP_SCR1(%a6),&0x80	# load dst operand
-
-	fmov.l		L_SCR3(%a6),%fpcr	# set FPCR
-	fmov.l		&0x0,%fpsr		# clear FPSR
-
-	fmul.x		FP_SCR0(%a6),%fp0	# execute multiply
-
-	fmov.l		%fpsr,%d1		# save status
-	fmov.l		&0x0,%fpcr		# clear FPCR
-
-	or.l		%d1,USER_FPSR(%a6)	# save INEX2,N
-
-fmul_normal_exit:
-	fmovm.x		&0x80,FP_SCR0(%a6)	# store out result
-	mov.l		%d2,-(%sp)		# save d2
-	mov.w		FP_SCR0_EX(%a6),%d1	# load {sgn,exp}
-	mov.l		%d1,%d2			# make a copy
-	andi.l		&0x7fff,%d1		# strip sign
-	andi.w		&0x8000,%d2		# keep old sign
-	sub.l		%d0,%d1			# add scale factor
-	or.w		%d2,%d1			# concat old sign,new exp
-	mov.w		%d1,FP_SCR0_EX(%a6)	# insert new exponent
-	mov.l		(%sp)+,%d2		# restore d2
-	fmovm.x		FP_SCR0(%a6),&0x80	# return default result in fp0
-	rts
-
-#
-# OVERFLOW:
-# - the result of the multiply operation is an overflow.
-# - do the multiply to the proper precision and rounding mode in order to
-# set the inexact bits.
-# - calculate the default result and return it in fp0.
-# - if overflow or inexact is enabled, we need a multiply result rounded to
-# extended precision. if the original operation was extended, then we have this
-# result. if the original operation was single or double, we have to do another
-# multiply using extended precision and the correct rounding mode. the result
-# of this operation then has its exponent scaled by -0x6000 to create the
-# exceptional operand.
-#
-fmul_ovfl:
-	fmovm.x		FP_SCR1(%a6),&0x80	# load dst operand
-
-	fmov.l		L_SCR3(%a6),%fpcr	# set FPCR
-	fmov.l		&0x0,%fpsr		# clear FPSR
-
-	fmul.x		FP_SCR0(%a6),%fp0	# execute multiply
-
-	fmov.l		%fpsr,%d1		# save status
-	fmov.l		&0x0,%fpcr		# clear FPCR
-
-	or.l		%d1,USER_FPSR(%a6)	# save INEX2,N
-
-# save setting this until now because this is where fmul_may_ovfl may jump in
-fmul_ovfl_tst:
-	or.l		&ovfl_inx_mask,USER_FPSR(%a6) # set ovfl/aovfl/ainex
-
-	mov.b		FPCR_ENABLE(%a6),%d1
-	andi.b		&0x13,%d1		# is OVFL or INEX enabled?
-	bne.b		fmul_ovfl_ena		# yes
-
-# calculate the default result
-fmul_ovfl_dis:
-	btst		&neg_bit,FPSR_CC(%a6)	# is result negative?
-	sne		%d1			# set sign param accordingly
-	mov.l		L_SCR3(%a6),%d0		# pass rnd prec,mode
-	bsr.l		ovf_res			# calculate default result
-	or.b		%d0,FPSR_CC(%a6)	# set INF,N if applicable
-	fmovm.x		(%a0),&0x80		# return default result in fp0
-	rts
-
-#
-# OVFL is enabled; Create EXOP:
-# - if precision is extended, then we have the EXOP. simply bias the exponent
-# with an extra -0x6000. if the precision is single or double, we need to
-# calculate a result rounded to extended precision.
-#
-fmul_ovfl_ena:
-	mov.l		L_SCR3(%a6),%d1
-	andi.b		&0xc0,%d1		# test the rnd prec
-	bne.b		fmul_ovfl_ena_sd	# it's sgl or dbl
-
-fmul_ovfl_ena_cont:
-	fmovm.x		&0x80,FP_SCR0(%a6)	# move result to stack
-
-	mov.l		%d2,-(%sp)		# save d2
-	mov.w		FP_SCR0_EX(%a6),%d1	# fetch {sgn,exp}
-	mov.w		%d1,%d2			# make a copy
-	andi.l		&0x7fff,%d1		# strip sign
-	sub.l		%d0,%d1			# add scale factor
-	subi.l		&0x6000,%d1		# subtract bias
-	andi.w		&0x7fff,%d1		# clear sign bit
-	andi.w		&0x8000,%d2		# keep old sign
-	or.w		%d2,%d1			# concat old sign,new exp
-	mov.w		%d1,FP_SCR0_EX(%a6)	# insert new exponent
-	mov.l		(%sp)+,%d2		# restore d2
-	fmovm.x		FP_SCR0(%a6),&0x40	# return EXOP in fp1
-	bra.b		fmul_ovfl_dis
-
-fmul_ovfl_ena_sd:
-	fmovm.x		FP_SCR1(%a6),&0x80	# load dst operand
-
-	mov.l		L_SCR3(%a6),%d1
-	andi.b		&0x30,%d1		# keep rnd mode only
-	fmov.l		%d1,%fpcr		# set FPCR
-
-	fmul.x		FP_SCR0(%a6),%fp0	# execute multiply
-
-	fmov.l		&0x0,%fpcr		# clear FPCR
-	bra.b		fmul_ovfl_ena_cont
-
-#
-# may OVERFLOW:
-# - the result of the multiply operation MAY overflow.
-# - do the multiply to the proper precision and rounding mode in order to
-# set the inexact bits.
-# - calculate the default result and return it in fp0.
-#
-fmul_may_ovfl:
-	fmovm.x		FP_SCR1(%a6),&0x80	# load dst op
-
-	fmov.l		L_SCR3(%a6),%fpcr	# set FPCR
-	fmov.l		&0x0,%fpsr		# clear FPSR
-
-	fmul.x		FP_SCR0(%a6),%fp0	# execute multiply
-
-	fmov.l		%fpsr,%d1		# save status
-	fmov.l		&0x0,%fpcr		# clear FPCR
-
-	or.l		%d1,USER_FPSR(%a6)	# save INEX2,N
-
-	fabs.x		%fp0,%fp1		# make a copy of result
-	fcmp.b		%fp1,&0x2		# is |result| >= 2.b?
-	fbge.w		fmul_ovfl_tst		# yes; overflow has occurred
-
-# no, it didn't overflow; we have correct result
-	bra.w		fmul_normal_exit
-
-#
-# UNDERFLOW:
-# - the result of the multiply operation is an underflow.
-# - do the multiply to the proper precision and rounding mode in order to
-# set the inexact bits.
-# - calculate the default result and return it in fp0.
-# - if overflow or inexact is enabled, we need a multiply result rounded to
-# extended precision. if the original operation was extended, then we have this
-# result. if the original operation was single or double, we have to do another
-# multiply using extended precision and the correct rounding mode. the result
-# of this operation then has its exponent scaled by -0x6000 to create the
-# exceptional operand.
-#
-fmul_unfl:
-	bset		&unfl_bit,FPSR_EXCEPT(%a6) # set unfl exc bit
-
-# for fun, let's use only extended precision, round to zero. then, let
-# the unf_res() routine figure out all the rest.
-# will we get the correct answer.
-	fmovm.x		FP_SCR1(%a6),&0x80	# load dst operand
-
-	fmov.l		&rz_mode*0x10,%fpcr	# set FPCR
-	fmov.l		&0x0,%fpsr		# clear FPSR
-
-	fmul.x		FP_SCR0(%a6),%fp0	# execute multiply
-
-	fmov.l		%fpsr,%d1		# save status
-	fmov.l		&0x0,%fpcr		# clear FPCR
-
-	or.l		%d1,USER_FPSR(%a6)	# save INEX2,N
-
-	mov.b		FPCR_ENABLE(%a6),%d1
-	andi.b		&0x0b,%d1		# is UNFL or INEX enabled?
-	bne.b		fmul_unfl_ena		# yes
-
-fmul_unfl_dis:
-	fmovm.x		&0x80,FP_SCR0(%a6)	# store out result
-
-	lea		FP_SCR0(%a6),%a0	# pass: result addr
-	mov.l		L_SCR3(%a6),%d1		# pass: rnd prec,mode
-	bsr.l		unf_res			# calculate default result
-	or.b		%d0,FPSR_CC(%a6)	# unf_res2 may have set 'Z'
-	fmovm.x		FP_SCR0(%a6),&0x80	# return default result in fp0
-	rts
-
-#
-# UNFL is enabled.
-#
-fmul_unfl_ena:
-	fmovm.x		FP_SCR1(%a6),&0x40	# load dst op
-
-	mov.l		L_SCR3(%a6),%d1
-	andi.b		&0xc0,%d1		# is precision extended?
-	bne.b		fmul_unfl_ena_sd	# no, sgl or dbl
-
-# if the rnd mode is anything but RZ, then we have to re-do the above
-# multiplication because we used RZ for all.
-	fmov.l		L_SCR3(%a6),%fpcr	# set FPCR
-
-fmul_unfl_ena_cont:
-	fmov.l		&0x0,%fpsr		# clear FPSR
-
-	fmul.x		FP_SCR0(%a6),%fp1	# execute multiply
-
-	fmov.l		&0x0,%fpcr		# clear FPCR
-
-	fmovm.x		&0x40,FP_SCR0(%a6)	# save result to stack
-	mov.l		%d2,-(%sp)		# save d2
-	mov.w		FP_SCR0_EX(%a6),%d1	# fetch {sgn,exp}
-	mov.l		%d1,%d2			# make a copy
-	andi.l		&0x7fff,%d1		# strip sign
-	andi.w		&0x8000,%d2		# keep old sign
-	sub.l		%d0,%d1			# add scale factor
-	addi.l		&0x6000,%d1		# add bias
-	andi.w		&0x7fff,%d1
-	or.w		%d2,%d1			# concat old sign,new exp
-	mov.w		%d1,FP_SCR0_EX(%a6)	# insert new exponent
-	mov.l		(%sp)+,%d2		# restore d2
-	fmovm.x		FP_SCR0(%a6),&0x40	# return EXOP in fp1
-	bra.w		fmul_unfl_dis
-
-fmul_unfl_ena_sd:
-	mov.l		L_SCR3(%a6),%d1
-	andi.b		&0x30,%d1		# use only rnd mode
-	fmov.l		%d1,%fpcr		# set FPCR
-
-	bra.b		fmul_unfl_ena_cont
-
-# MAY UNDERFLOW:
-# -use the correct rounding mode and precision. this code favors operations
-# that do not underflow.
-fmul_may_unfl:
-	fmovm.x		FP_SCR1(%a6),&0x80	# load dst operand
-
-	fmov.l		L_SCR3(%a6),%fpcr	# set FPCR
-	fmov.l		&0x0,%fpsr		# clear FPSR
-
-	fmul.x		FP_SCR0(%a6),%fp0	# execute multiply
-
-	fmov.l		%fpsr,%d1		# save status
-	fmov.l		&0x0,%fpcr		# clear FPCR
-
-	or.l		%d1,USER_FPSR(%a6)	# save INEX2,N
-
-	fabs.x		%fp0,%fp1		# make a copy of result
-	fcmp.b		%fp1,&0x2		# is |result| > 2.b?
-	fbgt.w		fmul_normal_exit	# no; no underflow occurred
-	fblt.w		fmul_unfl		# yes; underflow occurred
-
-#
-# we still don't know if underflow occurred. result is ~ equal to 2. but,
-# we don't know if the result was an underflow that rounded up to a 2 or
-# a normalized number that rounded down to a 2. so, redo the entire operation
-# using RZ as the rounding mode to see what the pre-rounded result is.
-# this case should be relatively rare.
-#
-	fmovm.x		FP_SCR1(%a6),&0x40	# load dst operand
-
-	mov.l		L_SCR3(%a6),%d1
-	andi.b		&0xc0,%d1		# keep rnd prec
-	ori.b		&rz_mode*0x10,%d1	# insert RZ
-
-	fmov.l		%d1,%fpcr		# set FPCR
-	fmov.l		&0x0,%fpsr		# clear FPSR
-
-	fmul.x		FP_SCR0(%a6),%fp1	# execute multiply
-
-	fmov.l		&0x0,%fpcr		# clear FPCR
-	fabs.x		%fp1			# make absolute value
-	fcmp.b		%fp1,&0x2		# is |result| < 2.b?
-	fbge.w		fmul_normal_exit	# no; no underflow occurred
-	bra.w		fmul_unfl		# yes, underflow occurred
-
-################################################################################
-
-#
-# Multiply: inputs are not both normalized; what are they?
-#
-fmul_not_norm:
-	mov.w		(tbl_fmul_op.b,%pc,%d1.w*2),%d1
-	jmp		(tbl_fmul_op.b,%pc,%d1.w)
-
-	swbeg		&48
-tbl_fmul_op:
-	short		fmul_norm	- tbl_fmul_op # NORM x NORM
-	short		fmul_zero	- tbl_fmul_op # NORM x ZERO
-	short		fmul_inf_src	- tbl_fmul_op # NORM x INF
-	short		fmul_res_qnan	- tbl_fmul_op # NORM x QNAN
-	short		fmul_norm	- tbl_fmul_op # NORM x DENORM
-	short		fmul_res_snan	- tbl_fmul_op # NORM x SNAN
-	short		tbl_fmul_op	- tbl_fmul_op #
-	short		tbl_fmul_op	- tbl_fmul_op #
-
-	short		fmul_zero	- tbl_fmul_op # ZERO x NORM
-	short		fmul_zero	- tbl_fmul_op # ZERO x ZERO
-	short		fmul_res_operr	- tbl_fmul_op # ZERO x INF
-	short		fmul_res_qnan	- tbl_fmul_op # ZERO x QNAN
-	short		fmul_zero	- tbl_fmul_op # ZERO x DENORM
-	short		fmul_res_snan	- tbl_fmul_op # ZERO x SNAN
-	short		tbl_fmul_op	- tbl_fmul_op #
-	short		tbl_fmul_op	- tbl_fmul_op #
-
-	short		fmul_inf_dst	- tbl_fmul_op # INF x NORM
-	short		fmul_res_operr	- tbl_fmul_op # INF x ZERO
-	short		fmul_inf_dst	- tbl_fmul_op # INF x INF
-	short		fmul_res_qnan	- tbl_fmul_op # INF x QNAN
-	short		fmul_inf_dst	- tbl_fmul_op # INF x DENORM
-	short		fmul_res_snan	- tbl_fmul_op # INF x SNAN
-	short		tbl_fmul_op	- tbl_fmul_op #
-	short		tbl_fmul_op	- tbl_fmul_op #
-
-	short		fmul_res_qnan	- tbl_fmul_op # QNAN x NORM
-	short		fmul_res_qnan	- tbl_fmul_op # QNAN x ZERO
-	short		fmul_res_qnan	- tbl_fmul_op # QNAN x INF
-	short		fmul_res_qnan	- tbl_fmul_op # QNAN x QNAN
-	short		fmul_res_qnan	- tbl_fmul_op # QNAN x DENORM
-	short		fmul_res_snan	- tbl_fmul_op # QNAN x SNAN
-	short		tbl_fmul_op	- tbl_fmul_op #
-	short		tbl_fmul_op	- tbl_fmul_op #
-
-	short		fmul_norm	- tbl_fmul_op # NORM x NORM
-	short		fmul_zero	- tbl_fmul_op # NORM x ZERO
-	short		fmul_inf_src	- tbl_fmul_op # NORM x INF
-	short		fmul_res_qnan	- tbl_fmul_op # NORM x QNAN
-	short		fmul_norm	- tbl_fmul_op # NORM x DENORM
-	short		fmul_res_snan	- tbl_fmul_op # NORM x SNAN
-	short		tbl_fmul_op	- tbl_fmul_op #
-	short		tbl_fmul_op	- tbl_fmul_op #
-
-	short		fmul_res_snan	- tbl_fmul_op # SNAN x NORM
-	short		fmul_res_snan	- tbl_fmul_op # SNAN x ZERO
-	short		fmul_res_snan	- tbl_fmul_op # SNAN x INF
-	short		fmul_res_snan	- tbl_fmul_op # SNAN x QNAN
-	short		fmul_res_snan	- tbl_fmul_op # SNAN x DENORM
-	short		fmul_res_snan	- tbl_fmul_op # SNAN x SNAN
-	short		tbl_fmul_op	- tbl_fmul_op #
-	short		tbl_fmul_op	- tbl_fmul_op #
-
-fmul_res_operr:
-	bra.l		res_operr
-fmul_res_snan:
-	bra.l		res_snan
-fmul_res_qnan:
-	bra.l		res_qnan
-
-#
-# Multiply: (Zero x Zero) || (Zero x norm) || (Zero x denorm)
-#
-	global		fmul_zero		# global for fsglmul
-fmul_zero:
-	mov.b		SRC_EX(%a0),%d0		# exclusive or the signs
-	mov.b		DST_EX(%a1),%d1
-	eor.b		%d0,%d1
-	bpl.b		fmul_zero_p		# result ZERO is pos.
-fmul_zero_n:
-	fmov.s		&0x80000000,%fp0	# load -ZERO
-	mov.b		&z_bmask+neg_bmask,FPSR_CC(%a6) # set Z/N
-	rts
-fmul_zero_p:
-	fmov.s		&0x00000000,%fp0	# load +ZERO
-	mov.b		&z_bmask,FPSR_CC(%a6)	# set Z
-	rts
-
-#
-# Multiply: (inf x inf) || (inf x norm) || (inf x denorm)
-#
-# Note: The j-bit for an infinity is a don't-care. However, to be
-# strictly compatible w/ the 68881/882, we make sure to return an
-# INF w/ the j-bit set if the input INF j-bit was set. Destination
-# INFs take priority.
-#
-	global		fmul_inf_dst		# global for fsglmul
-fmul_inf_dst:
-	fmovm.x		DST(%a1),&0x80		# return INF result in fp0
-	mov.b		SRC_EX(%a0),%d0		# exclusive or the signs
-	mov.b		DST_EX(%a1),%d1
-	eor.b		%d0,%d1
-	bpl.b		fmul_inf_dst_p		# result INF is pos.
-fmul_inf_dst_n:
-	fabs.x		%fp0			# clear result sign
-	fneg.x		%fp0			# set result sign
-	mov.b		&inf_bmask+neg_bmask,FPSR_CC(%a6) # set INF/N
-	rts
-fmul_inf_dst_p:
-	fabs.x		%fp0			# clear result sign
-	mov.b		&inf_bmask,FPSR_CC(%a6)	# set INF
-	rts
-
-	global		fmul_inf_src		# global for fsglmul
-fmul_inf_src:
-	fmovm.x		SRC(%a0),&0x80		# return INF result in fp0
-	mov.b		SRC_EX(%a0),%d0		# exclusive or the signs
-	mov.b		DST_EX(%a1),%d1
-	eor.b		%d0,%d1
-	bpl.b		fmul_inf_dst_p		# result INF is pos.
-	bra.b		fmul_inf_dst_n
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	fin(): emulates the fmove instruction				#
-#	fsin(): emulates the fsmove instruction				#
-#	fdin(): emulates the fdmove instruction				#
-#									#
-# XREF ****************************************************************	#
-#	norm() - normalize mantissa for EXOP on denorm			#
-#	scale_to_zero_src() - scale src exponent to zero		#
-#	ovf_res() - return default overflow result			#
-#	unf_res() - return default underflow result			#
-#	res_qnan_1op() - return QNAN result				#
-#	res_snan_1op() - return SNAN result				#
-#									#
-# INPUT ***************************************************************	#
-#	a0 = pointer to extended precision source operand		#
-#	d0 = round prec/mode						#
-#									#
-# OUTPUT **************************************************************	#
-#	fp0 = result							#
-#	fp1 = EXOP (if exception occurred)				#
-#									#
-# ALGORITHM ***********************************************************	#
-#	Handle NANs, infinities, and zeroes as special cases. Divide	#
-# norms into extended, single, and double precision.			#
-#	Norms can be emulated w/ a regular fmove instruction. For	#
-# sgl/dbl, must scale exponent and perform an "fmove". Check to see	#
-# if the result would have overflowed/underflowed. If so, use unf_res()	#
-# or ovf_res() to return the default result. Also return EXOP if	#
-# exception is enabled. If no exception, return the default result.	#
-#	Unnorms don't pass through here.				#
-#									#
-#########################################################################
-
-	global		fsin
-fsin:
-	andi.b		&0x30,%d0		# clear rnd prec
-	ori.b		&s_mode*0x10,%d0	# insert sgl precision
-	bra.b		fin
-
-	global		fdin
-fdin:
-	andi.b		&0x30,%d0		# clear rnd prec
-	ori.b		&d_mode*0x10,%d0	# insert dbl precision
-
-	global		fin
-fin:
-	mov.l		%d0,L_SCR3(%a6)		# store rnd info
-
-	mov.b		STAG(%a6),%d1		# fetch src optype tag
-	bne.w		fin_not_norm		# optimize on non-norm input
-
-#
-# FP MOVE IN: NORMs and DENORMs ONLY!
-#
-fin_norm:
-	andi.b		&0xc0,%d0		# is precision extended?
-	bne.w		fin_not_ext		# no, so go handle dbl or sgl
-
-#
-# precision selected is extended. so...we cannot get an underflow
-# or overflow because of rounding to the correct precision. so...
-# skip the scaling and unscaling...
-#
-	tst.b		SRC_EX(%a0)		# is the operand negative?
-	bpl.b		fin_norm_done		# no
-	bset		&neg_bit,FPSR_CC(%a6)	# yes, so set 'N' ccode bit
-fin_norm_done:
-	fmovm.x		SRC(%a0),&0x80		# return result in fp0
-	rts
-
-#
-# for an extended precision DENORM, the UNFL exception bit is set
-# the accrued bit is NOT set in this instance(no inexactness!)
-#
-fin_denorm:
-	andi.b		&0xc0,%d0		# is precision extended?
-	bne.w		fin_not_ext		# no, so go handle dbl or sgl
-
-	bset		&unfl_bit,FPSR_EXCEPT(%a6) # set unfl exc bit
-	tst.b		SRC_EX(%a0)		# is the operand negative?
-	bpl.b		fin_denorm_done		# no
-	bset		&neg_bit,FPSR_CC(%a6)	# yes, so set 'N' ccode bit
-fin_denorm_done:
-	fmovm.x		SRC(%a0),&0x80		# return result in fp0
-	btst		&unfl_bit,FPCR_ENABLE(%a6) # is UNFL enabled?
-	bne.b		fin_denorm_unfl_ena	# yes
-	rts
-
-#
-# the input is an extended DENORM and underflow is enabled in the FPCR.
-# normalize the mantissa and add the bias of 0x6000 to the resulting negative
-# exponent and insert back into the operand.
-#
-fin_denorm_unfl_ena:
-	mov.w		SRC_EX(%a0),FP_SCR0_EX(%a6)
-	mov.l		SRC_HI(%a0),FP_SCR0_HI(%a6)
-	mov.l		SRC_LO(%a0),FP_SCR0_LO(%a6)
-	lea		FP_SCR0(%a6),%a0	# pass: ptr to operand
-	bsr.l		norm			# normalize result
-	neg.w		%d0			# new exponent = -(shft val)
-	addi.w		&0x6000,%d0		# add new bias to exponent
-	mov.w		FP_SCR0_EX(%a6),%d1	# fetch old sign,exp
-	andi.w		&0x8000,%d1		# keep old sign
-	andi.w		&0x7fff,%d0		# clear sign position
-	or.w		%d1,%d0			# concat new exo,old sign
-	mov.w		%d0,FP_SCR0_EX(%a6)	# insert new exponent
-	fmovm.x		FP_SCR0(%a6),&0x40	# return EXOP in fp1
-	rts
-
-#
-# operand is to be rounded to single or double precision
-#
-fin_not_ext:
-	cmpi.b		%d0,&s_mode*0x10	# separate sgl/dbl prec
-	bne.b		fin_dbl
-
-#
-# operand is to be rounded to single precision
-#
-fin_sgl:
-	mov.w		SRC_EX(%a0),FP_SCR0_EX(%a6)
-	mov.l		SRC_HI(%a0),FP_SCR0_HI(%a6)
-	mov.l		SRC_LO(%a0),FP_SCR0_LO(%a6)
-	bsr.l		scale_to_zero_src	# calculate scale factor
-
-	cmpi.l		%d0,&0x3fff-0x3f80	# will move in underflow?
-	bge.w		fin_sd_unfl		# yes; go handle underflow
-	cmpi.l		%d0,&0x3fff-0x407e	# will move in overflow?
-	beq.w		fin_sd_may_ovfl		# maybe; go check
-	blt.w		fin_sd_ovfl		# yes; go handle overflow
-
-#
-# operand will NOT overflow or underflow when moved into the fp reg file
-#
-fin_sd_normal:
-	fmov.l		&0x0,%fpsr		# clear FPSR
-	fmov.l		L_SCR3(%a6),%fpcr	# set FPCR
-
-	fmov.x		FP_SCR0(%a6),%fp0	# perform move
-
-	fmov.l		%fpsr,%d1		# save FPSR
-	fmov.l		&0x0,%fpcr		# clear FPCR
-
-	or.l		%d1,USER_FPSR(%a6)	# save INEX2,N
-
-fin_sd_normal_exit:
-	mov.l		%d2,-(%sp)		# save d2
-	fmovm.x		&0x80,FP_SCR0(%a6)	# store out result
-	mov.w		FP_SCR0_EX(%a6),%d1	# load {sgn,exp}
-	mov.w		%d1,%d2			# make a copy
-	andi.l		&0x7fff,%d1		# strip sign
-	sub.l		%d0,%d1			# add scale factor
-	andi.w		&0x8000,%d2		# keep old sign
-	or.w		%d1,%d2			# concat old sign,new exponent
-	mov.w		%d2,FP_SCR0_EX(%a6)	# insert new exponent
-	mov.l		(%sp)+,%d2		# restore d2
-	fmovm.x		FP_SCR0(%a6),&0x80	# return result in fp0
-	rts
-
-#
-# operand is to be rounded to double precision
-#
-fin_dbl:
-	mov.w		SRC_EX(%a0),FP_SCR0_EX(%a6)
-	mov.l		SRC_HI(%a0),FP_SCR0_HI(%a6)
-	mov.l		SRC_LO(%a0),FP_SCR0_LO(%a6)
-	bsr.l		scale_to_zero_src	# calculate scale factor
-
-	cmpi.l		%d0,&0x3fff-0x3c00	# will move in underflow?
-	bge.w		fin_sd_unfl		# yes; go handle underflow
-	cmpi.l		%d0,&0x3fff-0x43fe	# will move in overflow?
-	beq.w		fin_sd_may_ovfl		# maybe; go check
-	blt.w		fin_sd_ovfl		# yes; go handle overflow
-	bra.w		fin_sd_normal		# no; ho handle normalized op
-
-#
-# operand WILL underflow when moved in to the fp register file
-#
-fin_sd_unfl:
-	bset		&unfl_bit,FPSR_EXCEPT(%a6) # set unfl exc bit
-
-	tst.b		FP_SCR0_EX(%a6)		# is operand negative?
-	bpl.b		fin_sd_unfl_tst
-	bset		&neg_bit,FPSR_CC(%a6)	# set 'N' ccode bit
-
-# if underflow or inexact is enabled, then go calculate the EXOP first.
-fin_sd_unfl_tst:
-	mov.b		FPCR_ENABLE(%a6),%d1
-	andi.b		&0x0b,%d1		# is UNFL or INEX enabled?
-	bne.b		fin_sd_unfl_ena		# yes
-
-fin_sd_unfl_dis:
-	lea		FP_SCR0(%a6),%a0	# pass: result addr
-	mov.l		L_SCR3(%a6),%d1		# pass: rnd prec,mode
-	bsr.l		unf_res			# calculate default result
-	or.b		%d0,FPSR_CC(%a6)	# unf_res may have set 'Z'
-	fmovm.x		FP_SCR0(%a6),&0x80	# return default result in fp0
-	rts
-
-#
-# operand will underflow AND underflow or inexact is enabled.
-# Therefore, we must return the result rounded to extended precision.
-#
-fin_sd_unfl_ena:
-	mov.l		FP_SCR0_HI(%a6),FP_SCR1_HI(%a6)
-	mov.l		FP_SCR0_LO(%a6),FP_SCR1_LO(%a6)
-	mov.w		FP_SCR0_EX(%a6),%d1	# load current exponent
-
-	mov.l		%d2,-(%sp)		# save d2
-	mov.w		%d1,%d2			# make a copy
-	andi.l		&0x7fff,%d1		# strip sign
-	sub.l		%d0,%d1			# subtract scale factor
-	andi.w		&0x8000,%d2		# extract old sign
-	addi.l		&0x6000,%d1		# add new bias
-	andi.w		&0x7fff,%d1
-	or.w		%d1,%d2			# concat old sign,new exp
-	mov.w		%d2,FP_SCR1_EX(%a6)	# insert new exponent
-	fmovm.x		FP_SCR1(%a6),&0x40	# return EXOP in fp1
-	mov.l		(%sp)+,%d2		# restore d2
-	bra.b		fin_sd_unfl_dis
-
-#
-# operand WILL overflow.
-#
-fin_sd_ovfl:
-	fmov.l		&0x0,%fpsr		# clear FPSR
-	fmov.l		L_SCR3(%a6),%fpcr	# set FPCR
-
-	fmov.x		FP_SCR0(%a6),%fp0	# perform move
-
-	fmov.l		&0x0,%fpcr		# clear FPCR
-	fmov.l		%fpsr,%d1		# save FPSR
-
-	or.l		%d1,USER_FPSR(%a6)	# save INEX2,N
-
-fin_sd_ovfl_tst:
-	or.l		&ovfl_inx_mask,USER_FPSR(%a6) # set ovfl/aovfl/ainex
-
-	mov.b		FPCR_ENABLE(%a6),%d1
-	andi.b		&0x13,%d1		# is OVFL or INEX enabled?
-	bne.b		fin_sd_ovfl_ena		# yes
-
-#
-# OVFL is not enabled; therefore, we must create the default result by
-# calling ovf_res().
-#
-fin_sd_ovfl_dis:
-	btst		&neg_bit,FPSR_CC(%a6)	# is result negative?
-	sne		%d1			# set sign param accordingly
-	mov.l		L_SCR3(%a6),%d0		# pass: prec,mode
-	bsr.l		ovf_res			# calculate default result
-	or.b		%d0,FPSR_CC(%a6)	# set INF,N if applicable
-	fmovm.x		(%a0),&0x80		# return default result in fp0
-	rts
-
-#
-# OVFL is enabled.
-# the INEX2 bit has already been updated by the round to the correct precision.
-# now, round to extended(and don't alter the FPSR).
-#
-fin_sd_ovfl_ena:
-	mov.l		%d2,-(%sp)		# save d2
-	mov.w		FP_SCR0_EX(%a6),%d1	# fetch {sgn,exp}
-	mov.l		%d1,%d2			# make a copy
-	andi.l		&0x7fff,%d1		# strip sign
-	andi.w		&0x8000,%d2		# keep old sign
-	sub.l		%d0,%d1			# add scale factor
-	sub.l		&0x6000,%d1		# subtract bias
-	andi.w		&0x7fff,%d1
-	or.w		%d2,%d1
-	mov.w		%d1,FP_SCR0_EX(%a6)	# insert new exponent
-	mov.l		(%sp)+,%d2		# restore d2
-	fmovm.x		FP_SCR0(%a6),&0x40	# return EXOP in fp1
-	bra.b		fin_sd_ovfl_dis
-
-#
-# the move in MAY overflow. so...
-#
-fin_sd_may_ovfl:
-	fmov.l		&0x0,%fpsr		# clear FPSR
-	fmov.l		L_SCR3(%a6),%fpcr	# set FPCR
-
-	fmov.x		FP_SCR0(%a6),%fp0	# perform the move
-
-	fmov.l		%fpsr,%d1		# save status
-	fmov.l		&0x0,%fpcr		# clear FPCR
-
-	or.l		%d1,USER_FPSR(%a6)	# save INEX2,N
-
-	fabs.x		%fp0,%fp1		# make a copy of result
-	fcmp.b		%fp1,&0x2		# is |result| >= 2.b?
-	fbge.w		fin_sd_ovfl_tst		# yes; overflow has occurred
-
-# no, it didn't overflow; we have correct result
-	bra.w		fin_sd_normal_exit
-
-##########################################################################
-
-#
-# operand is not a NORM: check its optype and branch accordingly
-#
-fin_not_norm:
-	cmpi.b		%d1,&DENORM		# weed out DENORM
-	beq.w		fin_denorm
-	cmpi.b		%d1,&SNAN		# weed out SNANs
-	beq.l		res_snan_1op
-	cmpi.b		%d1,&QNAN		# weed out QNANs
-	beq.l		res_qnan_1op
-
-#
-# do the fmove in; at this point, only possible ops are ZERO and INF.
-# use fmov to determine ccodes.
-# prec:mode should be zero at this point but it won't affect answer anyways.
-#
-	fmov.x		SRC(%a0),%fp0		# do fmove in
-	fmov.l		%fpsr,%d0		# no exceptions possible
-	rol.l		&0x8,%d0		# put ccodes in lo byte
-	mov.b		%d0,FPSR_CC(%a6)	# insert correct ccodes
-	rts
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	fdiv(): emulates the fdiv instruction				#
-#	fsdiv(): emulates the fsdiv instruction				#
-#	fddiv(): emulates the fddiv instruction				#
-#									#
-# XREF ****************************************************************	#
-#	scale_to_zero_src() - scale src exponent to zero		#
-#	scale_to_zero_dst() - scale dst exponent to zero		#
-#	unf_res() - return default underflow result			#
-#	ovf_res() - return default overflow result			#
-#	res_qnan() - return QNAN result					#
-#	res_snan() - return SNAN result					#
-#									#
-# INPUT ***************************************************************	#
-#	a0 = pointer to extended precision source operand		#
-#	a1 = pointer to extended precision destination operand		#
-#	d0  rnd prec,mode						#
-#									#
-# OUTPUT **************************************************************	#
-#	fp0 = result							#
-#	fp1 = EXOP (if exception occurred)				#
-#									#
-# ALGORITHM ***********************************************************	#
-#	Handle NANs, infinities, and zeroes as special cases. Divide	#
-# norms/denorms into ext/sgl/dbl precision.				#
-#	For norms/denorms, scale the exponents such that a divide	#
-# instruction won't cause an exception. Use the regular fdiv to		#
-# compute a result. Check if the regular operands would have taken	#
-# an exception. If so, return the default overflow/underflow result	#
-# and return the EXOP if exceptions are enabled. Else, scale the	#
-# result operand to the proper exponent.				#
-#									#
-#########################################################################
-
-	align		0x10
-tbl_fdiv_unfl:
-	long		0x3fff - 0x0000		# ext_unfl
-	long		0x3fff - 0x3f81		# sgl_unfl
-	long		0x3fff - 0x3c01		# dbl_unfl
-
-tbl_fdiv_ovfl:
-	long		0x3fff - 0x7ffe		# ext overflow exponent
-	long		0x3fff - 0x407e		# sgl overflow exponent
-	long		0x3fff - 0x43fe		# dbl overflow exponent
-
-	global		fsdiv
-fsdiv:
-	andi.b		&0x30,%d0		# clear rnd prec
-	ori.b		&s_mode*0x10,%d0	# insert sgl prec
-	bra.b		fdiv
-
-	global		fddiv
-fddiv:
-	andi.b		&0x30,%d0		# clear rnd prec
-	ori.b		&d_mode*0x10,%d0	# insert dbl prec
-
-	global		fdiv
-fdiv:
-	mov.l		%d0,L_SCR3(%a6)		# store rnd info
-
-	clr.w		%d1
-	mov.b		DTAG(%a6),%d1
-	lsl.b		&0x3,%d1
-	or.b		STAG(%a6),%d1		# combine src tags
-
-	bne.w		fdiv_not_norm		# optimize on non-norm input
-
-#
-# DIVIDE: NORMs and DENORMs ONLY!
-#
-fdiv_norm:
-	mov.w		DST_EX(%a1),FP_SCR1_EX(%a6)
-	mov.l		DST_HI(%a1),FP_SCR1_HI(%a6)
-	mov.l		DST_LO(%a1),FP_SCR1_LO(%a6)
-
-	mov.w		SRC_EX(%a0),FP_SCR0_EX(%a6)
-	mov.l		SRC_HI(%a0),FP_SCR0_HI(%a6)
-	mov.l		SRC_LO(%a0),FP_SCR0_LO(%a6)
-
-	bsr.l		scale_to_zero_src	# scale src exponent
-	mov.l		%d0,-(%sp)		# save scale factor 1
-
-	bsr.l		scale_to_zero_dst	# scale dst exponent
-
-	neg.l		(%sp)			# SCALE FACTOR = scale1 - scale2
-	add.l		%d0,(%sp)
-
-	mov.w		2+L_SCR3(%a6),%d1	# fetch precision
-	lsr.b		&0x6,%d1		# shift to lo bits
-	mov.l		(%sp)+,%d0		# load S.F.
-	cmp.l		%d0,(tbl_fdiv_ovfl.b,%pc,%d1.w*4) # will result overflow?
-	ble.w		fdiv_may_ovfl		# result will overflow
-
-	cmp.l		%d0,(tbl_fdiv_unfl.w,%pc,%d1.w*4) # will result underflow?
-	beq.w		fdiv_may_unfl		# maybe
-	bgt.w		fdiv_unfl		# yes; go handle underflow
-
-fdiv_normal:
-	fmovm.x		FP_SCR1(%a6),&0x80	# load dst op
-
-	fmov.l		L_SCR3(%a6),%fpcr	# save FPCR
-	fmov.l		&0x0,%fpsr		# clear FPSR
-
-	fdiv.x		FP_SCR0(%a6),%fp0	# perform divide
-
-	fmov.l		%fpsr,%d1		# save FPSR
-	fmov.l		&0x0,%fpcr		# clear FPCR
-
-	or.l		%d1,USER_FPSR(%a6)	# save INEX2,N
-
-fdiv_normal_exit:
-	fmovm.x		&0x80,FP_SCR0(%a6)	# store result on stack
-	mov.l		%d2,-(%sp)		# store d2
-	mov.w		FP_SCR0_EX(%a6),%d1	# load {sgn,exp}
-	mov.l		%d1,%d2			# make a copy
-	andi.l		&0x7fff,%d1		# strip sign
-	andi.w		&0x8000,%d2		# keep old sign
-	sub.l		%d0,%d1			# add scale factor
-	or.w		%d2,%d1			# concat old sign,new exp
-	mov.w		%d1,FP_SCR0_EX(%a6)	# insert new exponent
-	mov.l		(%sp)+,%d2		# restore d2
-	fmovm.x		FP_SCR0(%a6),&0x80	# return result in fp0
-	rts
-
-tbl_fdiv_ovfl2:
-	long		0x7fff
-	long		0x407f
-	long		0x43ff
-
-fdiv_no_ovfl:
-	mov.l		(%sp)+,%d0		# restore scale factor
-	bra.b		fdiv_normal_exit
-
-fdiv_may_ovfl:
-	mov.l		%d0,-(%sp)		# save scale factor
-
-	fmovm.x		FP_SCR1(%a6),&0x80	# load dst op
-
-	fmov.l		L_SCR3(%a6),%fpcr	# set FPCR
-	fmov.l		&0x0,%fpsr		# set FPSR
-
-	fdiv.x		FP_SCR0(%a6),%fp0	# execute divide
-
-	fmov.l		%fpsr,%d0
-	fmov.l		&0x0,%fpcr
-
-	or.l		%d0,USER_FPSR(%a6)	# save INEX,N
-
-	fmovm.x		&0x01,-(%sp)		# save result to stack
-	mov.w		(%sp),%d0		# fetch new exponent
-	add.l		&0xc,%sp		# clear result from stack
-	andi.l		&0x7fff,%d0		# strip sign
-	sub.l		(%sp),%d0		# add scale factor
-	cmp.l		%d0,(tbl_fdiv_ovfl2.b,%pc,%d1.w*4)
-	blt.b		fdiv_no_ovfl
-	mov.l		(%sp)+,%d0
-
-fdiv_ovfl_tst:
-	or.l		&ovfl_inx_mask,USER_FPSR(%a6) # set ovfl/aovfl/ainex
-
-	mov.b		FPCR_ENABLE(%a6),%d1
-	andi.b		&0x13,%d1		# is OVFL or INEX enabled?
-	bne.b		fdiv_ovfl_ena		# yes
-
-fdiv_ovfl_dis:
-	btst		&neg_bit,FPSR_CC(%a6)	# is result negative?
-	sne		%d1			# set sign param accordingly
-	mov.l		L_SCR3(%a6),%d0		# pass prec:rnd
-	bsr.l		ovf_res			# calculate default result
-	or.b		%d0,FPSR_CC(%a6)	# set INF if applicable
-	fmovm.x		(%a0),&0x80		# return default result in fp0
-	rts
-
-fdiv_ovfl_ena:
-	mov.l		L_SCR3(%a6),%d1
-	andi.b		&0xc0,%d1		# is precision extended?
-	bne.b		fdiv_ovfl_ena_sd	# no, do sgl or dbl
-
-fdiv_ovfl_ena_cont:
-	fmovm.x		&0x80,FP_SCR0(%a6)	# move result to stack
-
-	mov.l		%d2,-(%sp)		# save d2
-	mov.w		FP_SCR0_EX(%a6),%d1	# fetch {sgn,exp}
-	mov.w		%d1,%d2			# make a copy
-	andi.l		&0x7fff,%d1		# strip sign
-	sub.l		%d0,%d1			# add scale factor
-	subi.l		&0x6000,%d1		# subtract bias
-	andi.w		&0x7fff,%d1		# clear sign bit
-	andi.w		&0x8000,%d2		# keep old sign
-	or.w		%d2,%d1			# concat old sign,new exp
-	mov.w		%d1,FP_SCR0_EX(%a6)	# insert new exponent
-	mov.l		(%sp)+,%d2		# restore d2
-	fmovm.x		FP_SCR0(%a6),&0x40	# return EXOP in fp1
-	bra.b		fdiv_ovfl_dis
-
-fdiv_ovfl_ena_sd:
-	fmovm.x		FP_SCR1(%a6),&0x80	# load dst operand
-
-	mov.l		L_SCR3(%a6),%d1
-	andi.b		&0x30,%d1		# keep rnd mode
-	fmov.l		%d1,%fpcr		# set FPCR
-
-	fdiv.x		FP_SCR0(%a6),%fp0	# execute divide
-
-	fmov.l		&0x0,%fpcr		# clear FPCR
-	bra.b		fdiv_ovfl_ena_cont
-
-fdiv_unfl:
-	bset		&unfl_bit,FPSR_EXCEPT(%a6) # set unfl exc bit
-
-	fmovm.x		FP_SCR1(%a6),&0x80	# load dst op
-
-	fmov.l		&rz_mode*0x10,%fpcr	# set FPCR
-	fmov.l		&0x0,%fpsr		# clear FPSR
-
-	fdiv.x		FP_SCR0(%a6),%fp0	# execute divide
-
-	fmov.l		%fpsr,%d1		# save status
-	fmov.l		&0x0,%fpcr		# clear FPCR
-
-	or.l		%d1,USER_FPSR(%a6)	# save INEX2,N
-
-	mov.b		FPCR_ENABLE(%a6),%d1
-	andi.b		&0x0b,%d1		# is UNFL or INEX enabled?
-	bne.b		fdiv_unfl_ena		# yes
-
-fdiv_unfl_dis:
-	fmovm.x		&0x80,FP_SCR0(%a6)	# store out result
-
-	lea		FP_SCR0(%a6),%a0	# pass: result addr
-	mov.l		L_SCR3(%a6),%d1		# pass: rnd prec,mode
-	bsr.l		unf_res			# calculate default result
-	or.b		%d0,FPSR_CC(%a6)	# 'Z' may have been set
-	fmovm.x		FP_SCR0(%a6),&0x80	# return default result in fp0
-	rts
-
-#
-# UNFL is enabled.
-#
-fdiv_unfl_ena:
-	fmovm.x		FP_SCR1(%a6),&0x40	# load dst op
-
-	mov.l		L_SCR3(%a6),%d1
-	andi.b		&0xc0,%d1		# is precision extended?
-	bne.b		fdiv_unfl_ena_sd	# no, sgl or dbl
-
-	fmov.l		L_SCR3(%a6),%fpcr	# set FPCR
-
-fdiv_unfl_ena_cont:
-	fmov.l		&0x0,%fpsr		# clear FPSR
-
-	fdiv.x		FP_SCR0(%a6),%fp1	# execute divide
-
-	fmov.l		&0x0,%fpcr		# clear FPCR
-
-	fmovm.x		&0x40,FP_SCR0(%a6)	# save result to stack
-	mov.l		%d2,-(%sp)		# save d2
-	mov.w		FP_SCR0_EX(%a6),%d1	# fetch {sgn,exp}
-	mov.l		%d1,%d2			# make a copy
-	andi.l		&0x7fff,%d1		# strip sign
-	andi.w		&0x8000,%d2		# keep old sign
-	sub.l		%d0,%d1			# add scale factoer
-	addi.l		&0x6000,%d1		# add bias
-	andi.w		&0x7fff,%d1
-	or.w		%d2,%d1			# concat old sign,new exp
-	mov.w		%d1,FP_SCR0_EX(%a6)	# insert new exp
-	mov.l		(%sp)+,%d2		# restore d2
-	fmovm.x		FP_SCR0(%a6),&0x40	# return EXOP in fp1
-	bra.w		fdiv_unfl_dis
-
-fdiv_unfl_ena_sd:
-	mov.l		L_SCR3(%a6),%d1
-	andi.b		&0x30,%d1		# use only rnd mode
-	fmov.l		%d1,%fpcr		# set FPCR
-
-	bra.b		fdiv_unfl_ena_cont
-
-#
-# the divide operation MAY underflow:
-#
-fdiv_may_unfl:
-	fmovm.x		FP_SCR1(%a6),&0x80	# load dst op
-
-	fmov.l		L_SCR3(%a6),%fpcr	# set FPCR
-	fmov.l		&0x0,%fpsr		# clear FPSR
-
-	fdiv.x		FP_SCR0(%a6),%fp0	# execute divide
-
-	fmov.l		%fpsr,%d1		# save status
-	fmov.l		&0x0,%fpcr		# clear FPCR
-
-	or.l		%d1,USER_FPSR(%a6)	# save INEX2,N
-
-	fabs.x		%fp0,%fp1		# make a copy of result
-	fcmp.b		%fp1,&0x1		# is |result| > 1.b?
-	fbgt.w		fdiv_normal_exit	# no; no underflow occurred
-	fblt.w		fdiv_unfl		# yes; underflow occurred
-
-#
-# we still don't know if underflow occurred. result is ~ equal to 1. but,
-# we don't know if the result was an underflow that rounded up to a 1
-# or a normalized number that rounded down to a 1. so, redo the entire
-# operation using RZ as the rounding mode to see what the pre-rounded
-# result is. this case should be relatively rare.
-#
-	fmovm.x		FP_SCR1(%a6),&0x40	# load dst op into fp1
-
-	mov.l		L_SCR3(%a6),%d1
-	andi.b		&0xc0,%d1		# keep rnd prec
-	ori.b		&rz_mode*0x10,%d1	# insert RZ
-
-	fmov.l		%d1,%fpcr		# set FPCR
-	fmov.l		&0x0,%fpsr		# clear FPSR
-
-	fdiv.x		FP_SCR0(%a6),%fp1	# execute divide
-
-	fmov.l		&0x0,%fpcr		# clear FPCR
-	fabs.x		%fp1			# make absolute value
-	fcmp.b		%fp1,&0x1		# is |result| < 1.b?
-	fbge.w		fdiv_normal_exit	# no; no underflow occurred
-	bra.w		fdiv_unfl		# yes; underflow occurred
-
-############################################################################
-
-#
-# Divide: inputs are not both normalized; what are they?
-#
-fdiv_not_norm:
-	mov.w		(tbl_fdiv_op.b,%pc,%d1.w*2),%d1
-	jmp		(tbl_fdiv_op.b,%pc,%d1.w*1)
-
-	swbeg		&48
-tbl_fdiv_op:
-	short		fdiv_norm	- tbl_fdiv_op # NORM / NORM
-	short		fdiv_inf_load	- tbl_fdiv_op # NORM / ZERO
-	short		fdiv_zero_load	- tbl_fdiv_op # NORM / INF
-	short		fdiv_res_qnan	- tbl_fdiv_op # NORM / QNAN
-	short		fdiv_norm	- tbl_fdiv_op # NORM / DENORM
-	short		fdiv_res_snan	- tbl_fdiv_op # NORM / SNAN
-	short		tbl_fdiv_op	- tbl_fdiv_op #
-	short		tbl_fdiv_op	- tbl_fdiv_op #
-
-	short		fdiv_zero_load	- tbl_fdiv_op # ZERO / NORM
-	short		fdiv_res_operr	- tbl_fdiv_op # ZERO / ZERO
-	short		fdiv_zero_load	- tbl_fdiv_op # ZERO / INF
-	short		fdiv_res_qnan	- tbl_fdiv_op # ZERO / QNAN
-	short		fdiv_zero_load	- tbl_fdiv_op # ZERO / DENORM
-	short		fdiv_res_snan	- tbl_fdiv_op # ZERO / SNAN
-	short		tbl_fdiv_op	- tbl_fdiv_op #
-	short		tbl_fdiv_op	- tbl_fdiv_op #
-
-	short		fdiv_inf_dst	- tbl_fdiv_op # INF / NORM
-	short		fdiv_inf_dst	- tbl_fdiv_op # INF / ZERO
-	short		fdiv_res_operr	- tbl_fdiv_op # INF / INF
-	short		fdiv_res_qnan	- tbl_fdiv_op # INF / QNAN
-	short		fdiv_inf_dst	- tbl_fdiv_op # INF / DENORM
-	short		fdiv_res_snan	- tbl_fdiv_op # INF / SNAN
-	short		tbl_fdiv_op	- tbl_fdiv_op #
-	short		tbl_fdiv_op	- tbl_fdiv_op #
-
-	short		fdiv_res_qnan	- tbl_fdiv_op # QNAN / NORM
-	short		fdiv_res_qnan	- tbl_fdiv_op # QNAN / ZERO
-	short		fdiv_res_qnan	- tbl_fdiv_op # QNAN / INF
-	short		fdiv_res_qnan	- tbl_fdiv_op # QNAN / QNAN
-	short		fdiv_res_qnan	- tbl_fdiv_op # QNAN / DENORM
-	short		fdiv_res_snan	- tbl_fdiv_op # QNAN / SNAN
-	short		tbl_fdiv_op	- tbl_fdiv_op #
-	short		tbl_fdiv_op	- tbl_fdiv_op #
-
-	short		fdiv_norm	- tbl_fdiv_op # DENORM / NORM
-	short		fdiv_inf_load	- tbl_fdiv_op # DENORM / ZERO
-	short		fdiv_zero_load	- tbl_fdiv_op # DENORM / INF
-	short		fdiv_res_qnan	- tbl_fdiv_op # DENORM / QNAN
-	short		fdiv_norm	- tbl_fdiv_op # DENORM / DENORM
-	short		fdiv_res_snan	- tbl_fdiv_op # DENORM / SNAN
-	short		tbl_fdiv_op	- tbl_fdiv_op #
-	short		tbl_fdiv_op	- tbl_fdiv_op #
-
-	short		fdiv_res_snan	- tbl_fdiv_op # SNAN / NORM
-	short		fdiv_res_snan	- tbl_fdiv_op # SNAN / ZERO
-	short		fdiv_res_snan	- tbl_fdiv_op # SNAN / INF
-	short		fdiv_res_snan	- tbl_fdiv_op # SNAN / QNAN
-	short		fdiv_res_snan	- tbl_fdiv_op # SNAN / DENORM
-	short		fdiv_res_snan	- tbl_fdiv_op # SNAN / SNAN
-	short		tbl_fdiv_op	- tbl_fdiv_op #
-	short		tbl_fdiv_op	- tbl_fdiv_op #
-
-fdiv_res_qnan:
-	bra.l		res_qnan
-fdiv_res_snan:
-	bra.l		res_snan
-fdiv_res_operr:
-	bra.l		res_operr
-
-	global		fdiv_zero_load		# global for fsgldiv
-fdiv_zero_load:
-	mov.b		SRC_EX(%a0),%d0		# result sign is exclusive
-	mov.b		DST_EX(%a1),%d1		# or of input signs.
-	eor.b		%d0,%d1
-	bpl.b		fdiv_zero_load_p	# result is positive
-	fmov.s		&0x80000000,%fp0	# load a -ZERO
-	mov.b		&z_bmask+neg_bmask,FPSR_CC(%a6)	# set Z/N
-	rts
-fdiv_zero_load_p:
-	fmov.s		&0x00000000,%fp0	# load a +ZERO
-	mov.b		&z_bmask,FPSR_CC(%a6)	# set Z
-	rts
-
-#
-# The destination was In Range and the source was a ZERO. The result,
-# Therefore, is an INF w/ the proper sign.
-# So, determine the sign and return a new INF (w/ the j-bit cleared).
-#
-	global		fdiv_inf_load		# global for fsgldiv
-fdiv_inf_load:
-	ori.w		&dz_mask+adz_mask,2+USER_FPSR(%a6) # no; set DZ/ADZ
-	mov.b		SRC_EX(%a0),%d0		# load both signs
-	mov.b		DST_EX(%a1),%d1
-	eor.b		%d0,%d1
-	bpl.b		fdiv_inf_load_p		# result is positive
-	fmov.s		&0xff800000,%fp0	# make result -INF
-	mov.b		&inf_bmask+neg_bmask,FPSR_CC(%a6) # set INF/N
-	rts
-fdiv_inf_load_p:
-	fmov.s		&0x7f800000,%fp0	# make result +INF
-	mov.b		&inf_bmask,FPSR_CC(%a6)	# set INF
-	rts
-
-#
-# The destination was an INF w/ an In Range or ZERO source, the result is
-# an INF w/ the proper sign.
-# The 68881/882 returns the destination INF w/ the new sign(if the j-bit of the
-# dst INF is set, then then j-bit of the result INF is also set).
-#
-	global		fdiv_inf_dst		# global for fsgldiv
-fdiv_inf_dst:
-	mov.b		DST_EX(%a1),%d0		# load both signs
-	mov.b		SRC_EX(%a0),%d1
-	eor.b		%d0,%d1
-	bpl.b		fdiv_inf_dst_p		# result is positive
-
-	fmovm.x		DST(%a1),&0x80		# return result in fp0
-	fabs.x		%fp0			# clear sign bit
-	fneg.x		%fp0			# set sign bit
-	mov.b		&inf_bmask+neg_bmask,FPSR_CC(%a6) # set INF/NEG
-	rts
-
-fdiv_inf_dst_p:
-	fmovm.x		DST(%a1),&0x80		# return result in fp0
-	fabs.x		%fp0			# return positive INF
-	mov.b		&inf_bmask,FPSR_CC(%a6) # set INF
-	rts
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	fneg(): emulates the fneg instruction				#
-#	fsneg(): emulates the fsneg instruction				#
-#	fdneg(): emulates the fdneg instruction				#
-#									#
-# XREF ****************************************************************	#
-#	norm() - normalize a denorm to provide EXOP			#
-#	scale_to_zero_src() - scale sgl/dbl source exponent		#
-#	ovf_res() - return default overflow result			#
-#	unf_res() - return default underflow result			#
-#	res_qnan_1op() - return QNAN result				#
-#	res_snan_1op() - return SNAN result				#
-#									#
-# INPUT ***************************************************************	#
-#	a0 = pointer to extended precision source operand		#
-#	d0 = rnd prec,mode						#
-#									#
-# OUTPUT **************************************************************	#
-#	fp0 = result							#
-#	fp1 = EXOP (if exception occurred)				#
-#									#
-# ALGORITHM ***********************************************************	#
-#	Handle NANs, zeroes, and infinities as special cases. Separate	#
-# norms/denorms into ext/sgl/dbl precisions. Extended precision can be	#
-# emulated by simply setting sign bit. Sgl/dbl operands must be scaled	#
-# and an actual fneg performed to see if overflow/underflow would have	#
-# occurred. If so, return default underflow/overflow result. Else,	#
-# scale the result exponent and return result. FPSR gets set based on	#
-# the result value.							#
-#									#
-#########################################################################
-
-	global		fsneg
-fsneg:
-	andi.b		&0x30,%d0		# clear rnd prec
-	ori.b		&s_mode*0x10,%d0	# insert sgl precision
-	bra.b		fneg
-
-	global		fdneg
-fdneg:
-	andi.b		&0x30,%d0		# clear rnd prec
-	ori.b		&d_mode*0x10,%d0	# insert dbl prec
-
-	global		fneg
-fneg:
-	mov.l		%d0,L_SCR3(%a6)		# store rnd info
-	mov.b		STAG(%a6),%d1
-	bne.w		fneg_not_norm		# optimize on non-norm input
-
-#
-# NEGATE SIGN : norms and denorms ONLY!
-#
-fneg_norm:
-	andi.b		&0xc0,%d0		# is precision extended?
-	bne.w		fneg_not_ext		# no; go handle sgl or dbl
-
-#
-# precision selected is extended. so...we can not get an underflow
-# or overflow because of rounding to the correct precision. so...
-# skip the scaling and unscaling...
-#
-	mov.l		SRC_HI(%a0),FP_SCR0_HI(%a6)
-	mov.l		SRC_LO(%a0),FP_SCR0_LO(%a6)
-	mov.w		SRC_EX(%a0),%d0
-	eori.w		&0x8000,%d0		# negate sign
-	bpl.b		fneg_norm_load		# sign is positive
-	mov.b		&neg_bmask,FPSR_CC(%a6)	# set 'N' ccode bit
-fneg_norm_load:
-	mov.w		%d0,FP_SCR0_EX(%a6)
-	fmovm.x		FP_SCR0(%a6),&0x80	# return result in fp0
-	rts
-
-#
-# for an extended precision DENORM, the UNFL exception bit is set
-# the accrued bit is NOT set in this instance(no inexactness!)
-#
-fneg_denorm:
-	andi.b		&0xc0,%d0		# is precision extended?
-	bne.b		fneg_not_ext		# no; go handle sgl or dbl
-
-	bset		&unfl_bit,FPSR_EXCEPT(%a6) # set unfl exc bit
-
-	mov.l		SRC_HI(%a0),FP_SCR0_HI(%a6)
-	mov.l		SRC_LO(%a0),FP_SCR0_LO(%a6)
-	mov.w		SRC_EX(%a0),%d0
-	eori.w		&0x8000,%d0		# negate sign
-	bpl.b		fneg_denorm_done	# no
-	mov.b		&neg_bmask,FPSR_CC(%a6)	# yes, set 'N' ccode bit
-fneg_denorm_done:
-	mov.w		%d0,FP_SCR0_EX(%a6)
-	fmovm.x		FP_SCR0(%a6),&0x80	# return default result in fp0
-
-	btst		&unfl_bit,FPCR_ENABLE(%a6) # is UNFL enabled?
-	bne.b		fneg_ext_unfl_ena	# yes
-	rts
-
-#
-# the input is an extended DENORM and underflow is enabled in the FPCR.
-# normalize the mantissa and add the bias of 0x6000 to the resulting negative
-# exponent and insert back into the operand.
-#
-fneg_ext_unfl_ena:
-	lea		FP_SCR0(%a6),%a0	# pass: ptr to operand
-	bsr.l		norm			# normalize result
-	neg.w		%d0			# new exponent = -(shft val)
-	addi.w		&0x6000,%d0		# add new bias to exponent
-	mov.w		FP_SCR0_EX(%a6),%d1	# fetch old sign,exp
-	andi.w		&0x8000,%d1		# keep old sign
-	andi.w		&0x7fff,%d0		# clear sign position
-	or.w		%d1,%d0			# concat old sign, new exponent
-	mov.w		%d0,FP_SCR0_EX(%a6)	# insert new exponent
-	fmovm.x		FP_SCR0(%a6),&0x40	# return EXOP in fp1
-	rts
-
-#
-# operand is either single or double
-#
-fneg_not_ext:
-	cmpi.b		%d0,&s_mode*0x10	# separate sgl/dbl prec
-	bne.b		fneg_dbl
-
-#
-# operand is to be rounded to single precision
-#
-fneg_sgl:
-	mov.w		SRC_EX(%a0),FP_SCR0_EX(%a6)
-	mov.l		SRC_HI(%a0),FP_SCR0_HI(%a6)
-	mov.l		SRC_LO(%a0),FP_SCR0_LO(%a6)
-	bsr.l		scale_to_zero_src	# calculate scale factor
-
-	cmpi.l		%d0,&0x3fff-0x3f80	# will move in underflow?
-	bge.w		fneg_sd_unfl		# yes; go handle underflow
-	cmpi.l		%d0,&0x3fff-0x407e	# will move in overflow?
-	beq.w		fneg_sd_may_ovfl	# maybe; go check
-	blt.w		fneg_sd_ovfl		# yes; go handle overflow
-
-#
-# operand will NOT overflow or underflow when moved in to the fp reg file
-#
-fneg_sd_normal:
-	fmov.l		&0x0,%fpsr		# clear FPSR
-	fmov.l		L_SCR3(%a6),%fpcr	# set FPCR
-
-	fneg.x		FP_SCR0(%a6),%fp0	# perform negation
-
-	fmov.l		%fpsr,%d1		# save FPSR
-	fmov.l		&0x0,%fpcr		# clear FPCR
-
-	or.l		%d1,USER_FPSR(%a6)	# save INEX2,N
-
-fneg_sd_normal_exit:
-	mov.l		%d2,-(%sp)		# save d2
-	fmovm.x		&0x80,FP_SCR0(%a6)	# store out result
-	mov.w		FP_SCR0_EX(%a6),%d1	# load sgn,exp
-	mov.w		%d1,%d2			# make a copy
-	andi.l		&0x7fff,%d1		# strip sign
-	sub.l		%d0,%d1			# add scale factor
-	andi.w		&0x8000,%d2		# keep old sign
-	or.w		%d1,%d2			# concat old sign,new exp
-	mov.w		%d2,FP_SCR0_EX(%a6)	# insert new exponent
-	mov.l		(%sp)+,%d2		# restore d2
-	fmovm.x		FP_SCR0(%a6),&0x80	# return result in fp0
-	rts
-
-#
-# operand is to be rounded to double precision
-#
-fneg_dbl:
-	mov.w		SRC_EX(%a0),FP_SCR0_EX(%a6)
-	mov.l		SRC_HI(%a0),FP_SCR0_HI(%a6)
-	mov.l		SRC_LO(%a0),FP_SCR0_LO(%a6)
-	bsr.l		scale_to_zero_src	# calculate scale factor
-
-	cmpi.l		%d0,&0x3fff-0x3c00	# will move in underflow?
-	bge.b		fneg_sd_unfl		# yes; go handle underflow
-	cmpi.l		%d0,&0x3fff-0x43fe	# will move in overflow?
-	beq.w		fneg_sd_may_ovfl	# maybe; go check
-	blt.w		fneg_sd_ovfl		# yes; go handle overflow
-	bra.w		fneg_sd_normal		# no; ho handle normalized op
-
-#
-# operand WILL underflow when moved in to the fp register file
-#
-fneg_sd_unfl:
-	bset		&unfl_bit,FPSR_EXCEPT(%a6) # set unfl exc bit
-
-	eori.b		&0x80,FP_SCR0_EX(%a6)	# negate sign
-	bpl.b		fneg_sd_unfl_tst
-	bset		&neg_bit,FPSR_CC(%a6)	# set 'N' ccode bit
-
-# if underflow or inexact is enabled, go calculate EXOP first.
-fneg_sd_unfl_tst:
-	mov.b		FPCR_ENABLE(%a6),%d1
-	andi.b		&0x0b,%d1		# is UNFL or INEX enabled?
-	bne.b		fneg_sd_unfl_ena	# yes
-
-fneg_sd_unfl_dis:
-	lea		FP_SCR0(%a6),%a0	# pass: result addr
-	mov.l		L_SCR3(%a6),%d1		# pass: rnd prec,mode
-	bsr.l		unf_res			# calculate default result
-	or.b		%d0,FPSR_CC(%a6)	# unf_res may have set 'Z'
-	fmovm.x		FP_SCR0(%a6),&0x80	# return default result in fp0
-	rts
-
-#
-# operand will underflow AND underflow is enabled.
-# Therefore, we must return the result rounded to extended precision.
-#
-fneg_sd_unfl_ena:
-	mov.l		FP_SCR0_HI(%a6),FP_SCR1_HI(%a6)
-	mov.l		FP_SCR0_LO(%a6),FP_SCR1_LO(%a6)
-	mov.w		FP_SCR0_EX(%a6),%d1	# load current exponent
-
-	mov.l		%d2,-(%sp)		# save d2
-	mov.l		%d1,%d2			# make a copy
-	andi.l		&0x7fff,%d1		# strip sign
-	andi.w		&0x8000,%d2		# keep old sign
-	sub.l		%d0,%d1			# subtract scale factor
-	addi.l		&0x6000,%d1		# add new bias
-	andi.w		&0x7fff,%d1
-	or.w		%d2,%d1			# concat new sign,new exp
-	mov.w		%d1,FP_SCR1_EX(%a6)	# insert new exp
-	fmovm.x		FP_SCR1(%a6),&0x40	# return EXOP in fp1
-	mov.l		(%sp)+,%d2		# restore d2
-	bra.b		fneg_sd_unfl_dis
-
-#
-# operand WILL overflow.
-#
-fneg_sd_ovfl:
-	fmov.l		&0x0,%fpsr		# clear FPSR
-	fmov.l		L_SCR3(%a6),%fpcr	# set FPCR
-
-	fneg.x		FP_SCR0(%a6),%fp0	# perform negation
-
-	fmov.l		&0x0,%fpcr		# clear FPCR
-	fmov.l		%fpsr,%d1		# save FPSR
-
-	or.l		%d1,USER_FPSR(%a6)	# save INEX2,N
-
-fneg_sd_ovfl_tst:
-	or.l		&ovfl_inx_mask,USER_FPSR(%a6) # set ovfl/aovfl/ainex
-
-	mov.b		FPCR_ENABLE(%a6),%d1
-	andi.b		&0x13,%d1		# is OVFL or INEX enabled?
-	bne.b		fneg_sd_ovfl_ena	# yes
-
-#
-# OVFL is not enabled; therefore, we must create the default result by
-# calling ovf_res().
-#
-fneg_sd_ovfl_dis:
-	btst		&neg_bit,FPSR_CC(%a6)	# is result negative?
-	sne		%d1			# set sign param accordingly
-	mov.l		L_SCR3(%a6),%d0		# pass: prec,mode
-	bsr.l		ovf_res			# calculate default result
-	or.b		%d0,FPSR_CC(%a6)	# set INF,N if applicable
-	fmovm.x		(%a0),&0x80		# return default result in fp0
-	rts
-
-#
-# OVFL is enabled.
-# the INEX2 bit has already been updated by the round to the correct precision.
-# now, round to extended(and don't alter the FPSR).
-#
-fneg_sd_ovfl_ena:
-	mov.l		%d2,-(%sp)		# save d2
-	mov.w		FP_SCR0_EX(%a6),%d1	# fetch {sgn,exp}
-	mov.l		%d1,%d2			# make a copy
-	andi.l		&0x7fff,%d1		# strip sign
-	andi.w		&0x8000,%d2		# keep old sign
-	sub.l		%d0,%d1			# add scale factor
-	subi.l		&0x6000,%d1		# subtract bias
-	andi.w		&0x7fff,%d1
-	or.w		%d2,%d1			# concat sign,exp
-	mov.w		%d1,FP_SCR0_EX(%a6)	# insert new exponent
-	fmovm.x		FP_SCR0(%a6),&0x40	# return EXOP in fp1
-	mov.l		(%sp)+,%d2		# restore d2
-	bra.b		fneg_sd_ovfl_dis
-
-#
-# the move in MAY underflow. so...
-#
-fneg_sd_may_ovfl:
-	fmov.l		&0x0,%fpsr		# clear FPSR
-	fmov.l		L_SCR3(%a6),%fpcr	# set FPCR
-
-	fneg.x		FP_SCR0(%a6),%fp0	# perform negation
-
-	fmov.l		%fpsr,%d1		# save status
-	fmov.l		&0x0,%fpcr		# clear FPCR
-
-	or.l		%d1,USER_FPSR(%a6)	# save INEX2,N
-
-	fabs.x		%fp0,%fp1		# make a copy of result
-	fcmp.b		%fp1,&0x2		# is |result| >= 2.b?
-	fbge.w		fneg_sd_ovfl_tst	# yes; overflow has occurred
-
-# no, it didn't overflow; we have correct result
-	bra.w		fneg_sd_normal_exit
-
-##########################################################################
-
-#
-# input is not normalized; what is it?
-#
-fneg_not_norm:
-	cmpi.b		%d1,&DENORM		# weed out DENORM
-	beq.w		fneg_denorm
-	cmpi.b		%d1,&SNAN		# weed out SNAN
-	beq.l		res_snan_1op
-	cmpi.b		%d1,&QNAN		# weed out QNAN
-	beq.l		res_qnan_1op
-
-#
-# do the fneg; at this point, only possible ops are ZERO and INF.
-# use fneg to determine ccodes.
-# prec:mode should be zero at this point but it won't affect answer anyways.
-#
-	fneg.x		SRC_EX(%a0),%fp0	# do fneg
-	fmov.l		%fpsr,%d0
-	rol.l		&0x8,%d0		# put ccodes in lo byte
-	mov.b		%d0,FPSR_CC(%a6)	# insert correct ccodes
-	rts
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	ftst(): emulates the ftest instruction				#
-#									#
-# XREF ****************************************************************	#
-#	res{s,q}nan_1op() - set NAN result for monadic instruction	#
-#									#
-# INPUT ***************************************************************	#
-#	a0 = pointer to extended precision source operand		#
-#									#
-# OUTPUT **************************************************************	#
-#	none								#
-#									#
-# ALGORITHM ***********************************************************	#
-#	Check the source operand tag (STAG) and set the FPCR according	#
-# to the operand type and sign.						#
-#									#
-#########################################################################
-
-	global		ftst
-ftst:
-	mov.b		STAG(%a6),%d1
-	bne.b		ftst_not_norm		# optimize on non-norm input
-
-#
-# Norm:
-#
-ftst_norm:
-	tst.b		SRC_EX(%a0)		# is operand negative?
-	bmi.b		ftst_norm_m		# yes
-	rts
-ftst_norm_m:
-	mov.b		&neg_bmask,FPSR_CC(%a6)	# set 'N' ccode bit
-	rts
-
-#
-# input is not normalized; what is it?
-#
-ftst_not_norm:
-	cmpi.b		%d1,&ZERO		# weed out ZERO
-	beq.b		ftst_zero
-	cmpi.b		%d1,&INF		# weed out INF
-	beq.b		ftst_inf
-	cmpi.b		%d1,&SNAN		# weed out SNAN
-	beq.l		res_snan_1op
-	cmpi.b		%d1,&QNAN		# weed out QNAN
-	beq.l		res_qnan_1op
-
-#
-# Denorm:
-#
-ftst_denorm:
-	tst.b		SRC_EX(%a0)		# is operand negative?
-	bmi.b		ftst_denorm_m		# yes
-	rts
-ftst_denorm_m:
-	mov.b		&neg_bmask,FPSR_CC(%a6)	# set 'N' ccode bit
-	rts
-
-#
-# Infinity:
-#
-ftst_inf:
-	tst.b		SRC_EX(%a0)		# is operand negative?
-	bmi.b		ftst_inf_m		# yes
-ftst_inf_p:
-	mov.b		&inf_bmask,FPSR_CC(%a6)	# set 'I' ccode bit
-	rts
-ftst_inf_m:
-	mov.b		&inf_bmask+neg_bmask,FPSR_CC(%a6) # set 'I','N' ccode bits
-	rts
-
-#
-# Zero:
-#
-ftst_zero:
-	tst.b		SRC_EX(%a0)		# is operand negative?
-	bmi.b		ftst_zero_m		# yes
-ftst_zero_p:
-	mov.b		&z_bmask,FPSR_CC(%a6)	# set 'N' ccode bit
-	rts
-ftst_zero_m:
-	mov.b		&z_bmask+neg_bmask,FPSR_CC(%a6)	# set 'Z','N' ccode bits
-	rts
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	fint(): emulates the fint instruction				#
-#									#
-# XREF ****************************************************************	#
-#	res_{s,q}nan_1op() - set NAN result for monadic operation	#
-#									#
-# INPUT ***************************************************************	#
-#	a0 = pointer to extended precision source operand		#
-#	d0 = round precision/mode					#
-#									#
-# OUTPUT **************************************************************	#
-#	fp0 = result							#
-#									#
-# ALGORITHM ***********************************************************	#
-#	Separate according to operand type. Unnorms don't pass through	#
-# here. For norms, load the rounding mode/prec, execute a "fint", then	#
-# store the resulting FPSR bits.					#
-#	For denorms, force the j-bit to a one and do the same as for	#
-# norms. Denorms are so low that the answer will either be a zero or a	#
-# one.									#
-#	For zeroes/infs/NANs, return the same while setting the FPSR	#
-# as appropriate.							#
-#									#
-#########################################################################
-
-	global		fint
-fint:
-	mov.b		STAG(%a6),%d1
-	bne.b		fint_not_norm		# optimize on non-norm input
-
-#
-# Norm:
-#
-fint_norm:
-	andi.b		&0x30,%d0		# set prec = ext
-
-	fmov.l		%d0,%fpcr		# set FPCR
-	fmov.l		&0x0,%fpsr		# clear FPSR
-
-	fint.x		SRC(%a0),%fp0		# execute fint
-
-	fmov.l		&0x0,%fpcr		# clear FPCR
-	fmov.l		%fpsr,%d0		# save FPSR
-	or.l		%d0,USER_FPSR(%a6)	# set exception bits
-
-	rts
-
-#
-# input is not normalized; what is it?
-#
-fint_not_norm:
-	cmpi.b		%d1,&ZERO		# weed out ZERO
-	beq.b		fint_zero
-	cmpi.b		%d1,&INF		# weed out INF
-	beq.b		fint_inf
-	cmpi.b		%d1,&DENORM		# weed out DENORM
-	beq.b		fint_denorm
-	cmpi.b		%d1,&SNAN		# weed out SNAN
-	beq.l		res_snan_1op
-	bra.l		res_qnan_1op		# weed out QNAN
-
-#
-# Denorm:
-#
-# for DENORMs, the result will be either (+/-)ZERO or (+/-)1.
-# also, the INEX2 and AINEX exception bits will be set.
-# so, we could either set these manually or force the DENORM
-# to a very small NORM and ship it to the NORM routine.
-# I do the latter.
-#
-fint_denorm:
-	mov.w		SRC_EX(%a0),FP_SCR0_EX(%a6) # copy sign, zero exp
-	mov.b		&0x80,FP_SCR0_HI(%a6)	# force DENORM ==> small NORM
-	lea		FP_SCR0(%a6),%a0
-	bra.b		fint_norm
-
-#
-# Zero:
-#
-fint_zero:
-	tst.b		SRC_EX(%a0)		# is ZERO negative?
-	bmi.b		fint_zero_m		# yes
-fint_zero_p:
-	fmov.s		&0x00000000,%fp0	# return +ZERO in fp0
-	mov.b		&z_bmask,FPSR_CC(%a6)	# set 'Z' ccode bit
-	rts
-fint_zero_m:
-	fmov.s		&0x80000000,%fp0	# return -ZERO in fp0
-	mov.b		&z_bmask+neg_bmask,FPSR_CC(%a6) # set 'Z','N' ccode bits
-	rts
-
-#
-# Infinity:
-#
-fint_inf:
-	fmovm.x		SRC(%a0),&0x80		# return result in fp0
-	tst.b		SRC_EX(%a0)		# is INF negative?
-	bmi.b		fint_inf_m		# yes
-fint_inf_p:
-	mov.b		&inf_bmask,FPSR_CC(%a6)	# set 'I' ccode bit
-	rts
-fint_inf_m:
-	mov.b		&inf_bmask+neg_bmask,FPSR_CC(%a6) # set 'N','I' ccode bits
-	rts
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	fintrz(): emulates the fintrz instruction			#
-#									#
-# XREF ****************************************************************	#
-#	res_{s,q}nan_1op() - set NAN result for monadic operation	#
-#									#
-# INPUT ***************************************************************	#
-#	a0 = pointer to extended precision source operand		#
-#	d0 = round precision/mode					#
-#									#
-# OUTPUT **************************************************************	#
-#	fp0 = result							#
-#									#
-# ALGORITHM ***********************************************************	#
-#	Separate according to operand type. Unnorms don't pass through	#
-# here. For norms, load the rounding mode/prec, execute a "fintrz",	#
-# then store the resulting FPSR bits.					#
-#	For denorms, force the j-bit to a one and do the same as for	#
-# norms. Denorms are so low that the answer will either be a zero or a	#
-# one.									#
-#	For zeroes/infs/NANs, return the same while setting the FPSR	#
-# as appropriate.							#
-#									#
-#########################################################################
-
-	global		fintrz
-fintrz:
-	mov.b		STAG(%a6),%d1
-	bne.b		fintrz_not_norm		# optimize on non-norm input
-
-#
-# Norm:
-#
-fintrz_norm:
-	fmov.l		&0x0,%fpsr		# clear FPSR
-
-	fintrz.x	SRC(%a0),%fp0		# execute fintrz
-
-	fmov.l		%fpsr,%d0		# save FPSR
-	or.l		%d0,USER_FPSR(%a6)	# set exception bits
-
-	rts
-
-#
-# input is not normalized; what is it?
-#
-fintrz_not_norm:
-	cmpi.b		%d1,&ZERO		# weed out ZERO
-	beq.b		fintrz_zero
-	cmpi.b		%d1,&INF		# weed out INF
-	beq.b		fintrz_inf
-	cmpi.b		%d1,&DENORM		# weed out DENORM
-	beq.b		fintrz_denorm
-	cmpi.b		%d1,&SNAN		# weed out SNAN
-	beq.l		res_snan_1op
-	bra.l		res_qnan_1op		# weed out QNAN
-
-#
-# Denorm:
-#
-# for DENORMs, the result will be (+/-)ZERO.
-# also, the INEX2 and AINEX exception bits will be set.
-# so, we could either set these manually or force the DENORM
-# to a very small NORM and ship it to the NORM routine.
-# I do the latter.
-#
-fintrz_denorm:
-	mov.w		SRC_EX(%a0),FP_SCR0_EX(%a6) # copy sign, zero exp
-	mov.b		&0x80,FP_SCR0_HI(%a6)	# force DENORM ==> small NORM
-	lea		FP_SCR0(%a6),%a0
-	bra.b		fintrz_norm
-
-#
-# Zero:
-#
-fintrz_zero:
-	tst.b		SRC_EX(%a0)		# is ZERO negative?
-	bmi.b		fintrz_zero_m		# yes
-fintrz_zero_p:
-	fmov.s		&0x00000000,%fp0	# return +ZERO in fp0
-	mov.b		&z_bmask,FPSR_CC(%a6)	# set 'Z' ccode bit
-	rts
-fintrz_zero_m:
-	fmov.s		&0x80000000,%fp0	# return -ZERO in fp0
-	mov.b		&z_bmask+neg_bmask,FPSR_CC(%a6) # set 'Z','N' ccode bits
-	rts
-
-#
-# Infinity:
-#
-fintrz_inf:
-	fmovm.x		SRC(%a0),&0x80		# return result in fp0
-	tst.b		SRC_EX(%a0)		# is INF negative?
-	bmi.b		fintrz_inf_m		# yes
-fintrz_inf_p:
-	mov.b		&inf_bmask,FPSR_CC(%a6)	# set 'I' ccode bit
-	rts
-fintrz_inf_m:
-	mov.b		&inf_bmask+neg_bmask,FPSR_CC(%a6) # set 'N','I' ccode bits
-	rts
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	fabs():  emulates the fabs instruction				#
-#	fsabs(): emulates the fsabs instruction				#
-#	fdabs(): emulates the fdabs instruction				#
-#									#
-# XREF **************************************************************** #
-#	norm() - normalize denorm mantissa to provide EXOP		#
-#	scale_to_zero_src() - make exponent. = 0; get scale factor	#
-#	unf_res() - calculate underflow result				#
-#	ovf_res() - calculate overflow result				#
-#	res_{s,q}nan_1op() - set NAN result for monadic operation	#
-#									#
-# INPUT *************************************************************** #
-#	a0 = pointer to extended precision source operand		#
-#	d0 = rnd precision/mode						#
-#									#
-# OUTPUT ************************************************************** #
-#	fp0 = result							#
-#	fp1 = EXOP (if exception occurred)				#
-#									#
-# ALGORITHM ***********************************************************	#
-#	Handle NANs, infinities, and zeroes as special cases. Divide	#
-# norms into extended, single, and double precision.			#
-#	Simply clear sign for extended precision norm. Ext prec denorm	#
-# gets an EXOP created for it since it's an underflow.			#
-#	Double and single precision can overflow and underflow. First,	#
-# scale the operand such that the exponent is zero. Perform an "fabs"	#
-# using the correct rnd mode/prec. Check to see if the original		#
-# exponent would take an exception. If so, use unf_res() or ovf_res()	#
-# to calculate the default result. Also, create the EXOP for the	#
-# exceptional case. If no exception should occur, insert the correct	#
-# result exponent and return.						#
-#	Unnorms don't pass through here.				#
-#									#
-#########################################################################
-
-	global		fsabs
-fsabs:
-	andi.b		&0x30,%d0		# clear rnd prec
-	ori.b		&s_mode*0x10,%d0	# insert sgl precision
-	bra.b		fabs
-
-	global		fdabs
-fdabs:
-	andi.b		&0x30,%d0		# clear rnd prec
-	ori.b		&d_mode*0x10,%d0	# insert dbl precision
-
-	global		fabs
-fabs:
-	mov.l		%d0,L_SCR3(%a6)		# store rnd info
-	mov.b		STAG(%a6),%d1
-	bne.w		fabs_not_norm		# optimize on non-norm input
-
-#
-# ABSOLUTE VALUE: norms and denorms ONLY!
-#
-fabs_norm:
-	andi.b		&0xc0,%d0		# is precision extended?
-	bne.b		fabs_not_ext		# no; go handle sgl or dbl
-
-#
-# precision selected is extended. so...we can not get an underflow
-# or overflow because of rounding to the correct precision. so...
-# skip the scaling and unscaling...
-#
-	mov.l		SRC_HI(%a0),FP_SCR0_HI(%a6)
-	mov.l		SRC_LO(%a0),FP_SCR0_LO(%a6)
-	mov.w		SRC_EX(%a0),%d1
-	bclr		&15,%d1			# force absolute value
-	mov.w		%d1,FP_SCR0_EX(%a6)	# insert exponent
-	fmovm.x		FP_SCR0(%a6),&0x80	# return result in fp0
-	rts
-
-#
-# for an extended precision DENORM, the UNFL exception bit is set
-# the accrued bit is NOT set in this instance(no inexactness!)
-#
-fabs_denorm:
-	andi.b		&0xc0,%d0		# is precision extended?
-	bne.b		fabs_not_ext		# no
-
-	bset		&unfl_bit,FPSR_EXCEPT(%a6) # set unfl exc bit
-
-	mov.l		SRC_HI(%a0),FP_SCR0_HI(%a6)
-	mov.l		SRC_LO(%a0),FP_SCR0_LO(%a6)
-	mov.w		SRC_EX(%a0),%d0
-	bclr		&15,%d0			# clear sign
-	mov.w		%d0,FP_SCR0_EX(%a6)	# insert exponent
-
-	fmovm.x		FP_SCR0(%a6),&0x80	# return default result in fp0
-
-	btst		&unfl_bit,FPCR_ENABLE(%a6) # is UNFL enabled?
-	bne.b		fabs_ext_unfl_ena
-	rts
-
-#
-# the input is an extended DENORM and underflow is enabled in the FPCR.
-# normalize the mantissa and add the bias of 0x6000 to the resulting negative
-# exponent and insert back into the operand.
-#
-fabs_ext_unfl_ena:
-	lea		FP_SCR0(%a6),%a0	# pass: ptr to operand
-	bsr.l		norm			# normalize result
-	neg.w		%d0			# new exponent = -(shft val)
-	addi.w		&0x6000,%d0		# add new bias to exponent
-	mov.w		FP_SCR0_EX(%a6),%d1	# fetch old sign,exp
-	andi.w		&0x8000,%d1		# keep old sign
-	andi.w		&0x7fff,%d0		# clear sign position
-	or.w		%d1,%d0			# concat old sign, new exponent
-	mov.w		%d0,FP_SCR0_EX(%a6)	# insert new exponent
-	fmovm.x		FP_SCR0(%a6),&0x40	# return EXOP in fp1
-	rts
-
-#
-# operand is either single or double
-#
-fabs_not_ext:
-	cmpi.b		%d0,&s_mode*0x10	# separate sgl/dbl prec
-	bne.b		fabs_dbl
-
-#
-# operand is to be rounded to single precision
-#
-fabs_sgl:
-	mov.w		SRC_EX(%a0),FP_SCR0_EX(%a6)
-	mov.l		SRC_HI(%a0),FP_SCR0_HI(%a6)
-	mov.l		SRC_LO(%a0),FP_SCR0_LO(%a6)
-	bsr.l		scale_to_zero_src	# calculate scale factor
-
-	cmpi.l		%d0,&0x3fff-0x3f80	# will move in underflow?
-	bge.w		fabs_sd_unfl		# yes; go handle underflow
-	cmpi.l		%d0,&0x3fff-0x407e	# will move in overflow?
-	beq.w		fabs_sd_may_ovfl	# maybe; go check
-	blt.w		fabs_sd_ovfl		# yes; go handle overflow
-
-#
-# operand will NOT overflow or underflow when moved in to the fp reg file
-#
-fabs_sd_normal:
-	fmov.l		&0x0,%fpsr		# clear FPSR
-	fmov.l		L_SCR3(%a6),%fpcr	# set FPCR
-
-	fabs.x		FP_SCR0(%a6),%fp0	# perform absolute
-
-	fmov.l		%fpsr,%d1		# save FPSR
-	fmov.l		&0x0,%fpcr		# clear FPCR
-
-	or.l		%d1,USER_FPSR(%a6)	# save INEX2,N
-
-fabs_sd_normal_exit:
-	mov.l		%d2,-(%sp)		# save d2
-	fmovm.x		&0x80,FP_SCR0(%a6)	# store out result
-	mov.w		FP_SCR0_EX(%a6),%d1	# load sgn,exp
-	mov.l		%d1,%d2			# make a copy
-	andi.l		&0x7fff,%d1		# strip sign
-	sub.l		%d0,%d1			# add scale factor
-	andi.w		&0x8000,%d2		# keep old sign
-	or.w		%d1,%d2			# concat old sign,new exp
-	mov.w		%d2,FP_SCR0_EX(%a6)	# insert new exponent
-	mov.l		(%sp)+,%d2		# restore d2
-	fmovm.x		FP_SCR0(%a6),&0x80	# return result in fp0
-	rts
-
-#
-# operand is to be rounded to double precision
-#
-fabs_dbl:
-	mov.w		SRC_EX(%a0),FP_SCR0_EX(%a6)
-	mov.l		SRC_HI(%a0),FP_SCR0_HI(%a6)
-	mov.l		SRC_LO(%a0),FP_SCR0_LO(%a6)
-	bsr.l		scale_to_zero_src	# calculate scale factor
-
-	cmpi.l		%d0,&0x3fff-0x3c00	# will move in underflow?
-	bge.b		fabs_sd_unfl		# yes; go handle underflow
-	cmpi.l		%d0,&0x3fff-0x43fe	# will move in overflow?
-	beq.w		fabs_sd_may_ovfl	# maybe; go check
-	blt.w		fabs_sd_ovfl		# yes; go handle overflow
-	bra.w		fabs_sd_normal		# no; ho handle normalized op
-
-#
-# operand WILL underflow when moved in to the fp register file
-#
-fabs_sd_unfl:
-	bset		&unfl_bit,FPSR_EXCEPT(%a6) # set unfl exc bit
-
-	bclr		&0x7,FP_SCR0_EX(%a6)	# force absolute value
-
-# if underflow or inexact is enabled, go calculate EXOP first.
-	mov.b		FPCR_ENABLE(%a6),%d1
-	andi.b		&0x0b,%d1		# is UNFL or INEX enabled?
-	bne.b		fabs_sd_unfl_ena	# yes
-
-fabs_sd_unfl_dis:
-	lea		FP_SCR0(%a6),%a0	# pass: result addr
-	mov.l		L_SCR3(%a6),%d1		# pass: rnd prec,mode
-	bsr.l		unf_res			# calculate default result
-	or.b		%d0,FPSR_CC(%a6)	# set possible 'Z' ccode
-	fmovm.x		FP_SCR0(%a6),&0x80	# return default result in fp0
-	rts
-
-#
-# operand will underflow AND underflow is enabled.
-# Therefore, we must return the result rounded to extended precision.
-#
-fabs_sd_unfl_ena:
-	mov.l		FP_SCR0_HI(%a6),FP_SCR1_HI(%a6)
-	mov.l		FP_SCR0_LO(%a6),FP_SCR1_LO(%a6)
-	mov.w		FP_SCR0_EX(%a6),%d1	# load current exponent
-
-	mov.l		%d2,-(%sp)		# save d2
-	mov.l		%d1,%d2			# make a copy
-	andi.l		&0x7fff,%d1		# strip sign
-	andi.w		&0x8000,%d2		# keep old sign
-	sub.l		%d0,%d1			# subtract scale factor
-	addi.l		&0x6000,%d1		# add new bias
-	andi.w		&0x7fff,%d1
-	or.w		%d2,%d1			# concat new sign,new exp
-	mov.w		%d1,FP_SCR1_EX(%a6)	# insert new exp
-	fmovm.x		FP_SCR1(%a6),&0x40	# return EXOP in fp1
-	mov.l		(%sp)+,%d2		# restore d2
-	bra.b		fabs_sd_unfl_dis
-
-#
-# operand WILL overflow.
-#
-fabs_sd_ovfl:
-	fmov.l		&0x0,%fpsr		# clear FPSR
-	fmov.l		L_SCR3(%a6),%fpcr	# set FPCR
-
-	fabs.x		FP_SCR0(%a6),%fp0	# perform absolute
-
-	fmov.l		&0x0,%fpcr		# clear FPCR
-	fmov.l		%fpsr,%d1		# save FPSR
-
-	or.l		%d1,USER_FPSR(%a6)	# save INEX2,N
-
-fabs_sd_ovfl_tst:
-	or.l		&ovfl_inx_mask,USER_FPSR(%a6) # set ovfl/aovfl/ainex
-
-	mov.b		FPCR_ENABLE(%a6),%d1
-	andi.b		&0x13,%d1		# is OVFL or INEX enabled?
-	bne.b		fabs_sd_ovfl_ena	# yes
-
-#
-# OVFL is not enabled; therefore, we must create the default result by
-# calling ovf_res().
-#
-fabs_sd_ovfl_dis:
-	btst		&neg_bit,FPSR_CC(%a6)	# is result negative?
-	sne		%d1			# set sign param accordingly
-	mov.l		L_SCR3(%a6),%d0		# pass: prec,mode
-	bsr.l		ovf_res			# calculate default result
-	or.b		%d0,FPSR_CC(%a6)	# set INF,N if applicable
-	fmovm.x		(%a0),&0x80		# return default result in fp0
-	rts
-
-#
-# OVFL is enabled.
-# the INEX2 bit has already been updated by the round to the correct precision.
-# now, round to extended(and don't alter the FPSR).
-#
-fabs_sd_ovfl_ena:
-	mov.l		%d2,-(%sp)		# save d2
-	mov.w		FP_SCR0_EX(%a6),%d1	# fetch {sgn,exp}
-	mov.l		%d1,%d2			# make a copy
-	andi.l		&0x7fff,%d1		# strip sign
-	andi.w		&0x8000,%d2		# keep old sign
-	sub.l		%d0,%d1			# add scale factor
-	subi.l		&0x6000,%d1		# subtract bias
-	andi.w		&0x7fff,%d1
-	or.w		%d2,%d1			# concat sign,exp
-	mov.w		%d1,FP_SCR0_EX(%a6)	# insert new exponent
-	fmovm.x		FP_SCR0(%a6),&0x40	# return EXOP in fp1
-	mov.l		(%sp)+,%d2		# restore d2
-	bra.b		fabs_sd_ovfl_dis
-
-#
-# the move in MAY underflow. so...
-#
-fabs_sd_may_ovfl:
-	fmov.l		&0x0,%fpsr		# clear FPSR
-	fmov.l		L_SCR3(%a6),%fpcr	# set FPCR
-
-	fabs.x		FP_SCR0(%a6),%fp0	# perform absolute
-
-	fmov.l		%fpsr,%d1		# save status
-	fmov.l		&0x0,%fpcr		# clear FPCR
-
-	or.l		%d1,USER_FPSR(%a6)	# save INEX2,N
-
-	fabs.x		%fp0,%fp1		# make a copy of result
-	fcmp.b		%fp1,&0x2		# is |result| >= 2.b?
-	fbge.w		fabs_sd_ovfl_tst	# yes; overflow has occurred
-
-# no, it didn't overflow; we have correct result
-	bra.w		fabs_sd_normal_exit
-
-##########################################################################
-
-#
-# input is not normalized; what is it?
-#
-fabs_not_norm:
-	cmpi.b		%d1,&DENORM		# weed out DENORM
-	beq.w		fabs_denorm
-	cmpi.b		%d1,&SNAN		# weed out SNAN
-	beq.l		res_snan_1op
-	cmpi.b		%d1,&QNAN		# weed out QNAN
-	beq.l		res_qnan_1op
-
-	fabs.x		SRC(%a0),%fp0		# force absolute value
-
-	cmpi.b		%d1,&INF		# weed out INF
-	beq.b		fabs_inf
-fabs_zero:
-	mov.b		&z_bmask,FPSR_CC(%a6)	# set 'Z' ccode bit
-	rts
-fabs_inf:
-	mov.b		&inf_bmask,FPSR_CC(%a6)	# set 'I' ccode bit
-	rts
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	fcmp(): fp compare op routine					#
-#									#
-# XREF ****************************************************************	#
-#	res_qnan() - return QNAN result					#
-#	res_snan() - return SNAN result					#
-#									#
-# INPUT ***************************************************************	#
-#	a0 = pointer to extended precision source operand		#
-#	a1 = pointer to extended precision destination operand		#
-#	d0 = round prec/mode						#
-#									#
-# OUTPUT ************************************************************** #
-#	None								#
-#									#
-# ALGORITHM ***********************************************************	#
-#	Handle NANs and denorms as special cases. For everything else,	#
-# just use the actual fcmp instruction to produce the correct condition	#
-# codes.								#
-#									#
-#########################################################################
-
-	global		fcmp
-fcmp:
-	clr.w		%d1
-	mov.b		DTAG(%a6),%d1
-	lsl.b		&0x3,%d1
-	or.b		STAG(%a6),%d1
-	bne.b		fcmp_not_norm		# optimize on non-norm input
-
-#
-# COMPARE FP OPs : NORMs, ZEROs, INFs, and "corrected" DENORMs
-#
-fcmp_norm:
-	fmovm.x		DST(%a1),&0x80		# load dst op
-
-	fcmp.x		%fp0,SRC(%a0)		# do compare
-
-	fmov.l		%fpsr,%d0		# save FPSR
-	rol.l		&0x8,%d0		# extract ccode bits
-	mov.b		%d0,FPSR_CC(%a6)	# set ccode bits(no exc bits are set)
-
-	rts
-
-#
-# fcmp: inputs are not both normalized; what are they?
-#
-fcmp_not_norm:
-	mov.w		(tbl_fcmp_op.b,%pc,%d1.w*2),%d1
-	jmp		(tbl_fcmp_op.b,%pc,%d1.w*1)
-
-	swbeg		&48
-tbl_fcmp_op:
-	short		fcmp_norm	- tbl_fcmp_op # NORM - NORM
-	short		fcmp_norm	- tbl_fcmp_op # NORM - ZERO
-	short		fcmp_norm	- tbl_fcmp_op # NORM - INF
-	short		fcmp_res_qnan	- tbl_fcmp_op # NORM - QNAN
-	short		fcmp_nrm_dnrm	- tbl_fcmp_op # NORM - DENORM
-	short		fcmp_res_snan	- tbl_fcmp_op # NORM - SNAN
-	short		tbl_fcmp_op	- tbl_fcmp_op #
-	short		tbl_fcmp_op	- tbl_fcmp_op #
-
-	short		fcmp_norm	- tbl_fcmp_op # ZERO - NORM
-	short		fcmp_norm	- tbl_fcmp_op # ZERO - ZERO
-	short		fcmp_norm	- tbl_fcmp_op # ZERO - INF
-	short		fcmp_res_qnan	- tbl_fcmp_op # ZERO - QNAN
-	short		fcmp_dnrm_s	- tbl_fcmp_op # ZERO - DENORM
-	short		fcmp_res_snan	- tbl_fcmp_op # ZERO - SNAN
-	short		tbl_fcmp_op	- tbl_fcmp_op #
-	short		tbl_fcmp_op	- tbl_fcmp_op #
-
-	short		fcmp_norm	- tbl_fcmp_op # INF - NORM
-	short		fcmp_norm	- tbl_fcmp_op # INF - ZERO
-	short		fcmp_norm	- tbl_fcmp_op # INF - INF
-	short		fcmp_res_qnan	- tbl_fcmp_op # INF - QNAN
-	short		fcmp_dnrm_s	- tbl_fcmp_op # INF - DENORM
-	short		fcmp_res_snan	- tbl_fcmp_op # INF - SNAN
-	short		tbl_fcmp_op	- tbl_fcmp_op #
-	short		tbl_fcmp_op	- tbl_fcmp_op #
-
-	short		fcmp_res_qnan	- tbl_fcmp_op # QNAN - NORM
-	short		fcmp_res_qnan	- tbl_fcmp_op # QNAN - ZERO
-	short		fcmp_res_qnan	- tbl_fcmp_op # QNAN - INF
-	short		fcmp_res_qnan	- tbl_fcmp_op # QNAN - QNAN
-	short		fcmp_res_qnan	- tbl_fcmp_op # QNAN - DENORM
-	short		fcmp_res_snan	- tbl_fcmp_op # QNAN - SNAN
-	short		tbl_fcmp_op	- tbl_fcmp_op #
-	short		tbl_fcmp_op	- tbl_fcmp_op #
-
-	short		fcmp_dnrm_nrm	- tbl_fcmp_op # DENORM - NORM
-	short		fcmp_dnrm_d	- tbl_fcmp_op # DENORM - ZERO
-	short		fcmp_dnrm_d	- tbl_fcmp_op # DENORM - INF
-	short		fcmp_res_qnan	- tbl_fcmp_op # DENORM - QNAN
-	short		fcmp_dnrm_sd	- tbl_fcmp_op # DENORM - DENORM
-	short		fcmp_res_snan	- tbl_fcmp_op # DENORM - SNAN
-	short		tbl_fcmp_op	- tbl_fcmp_op #
-	short		tbl_fcmp_op	- tbl_fcmp_op #
-
-	short		fcmp_res_snan	- tbl_fcmp_op # SNAN - NORM
-	short		fcmp_res_snan	- tbl_fcmp_op # SNAN - ZERO
-	short		fcmp_res_snan	- tbl_fcmp_op # SNAN - INF
-	short		fcmp_res_snan	- tbl_fcmp_op # SNAN - QNAN
-	short		fcmp_res_snan	- tbl_fcmp_op # SNAN - DENORM
-	short		fcmp_res_snan	- tbl_fcmp_op # SNAN - SNAN
-	short		tbl_fcmp_op	- tbl_fcmp_op #
-	short		tbl_fcmp_op	- tbl_fcmp_op #
-
-# unlike all other functions for QNAN and SNAN, fcmp does NOT set the
-# 'N' bit for a negative QNAN or SNAN input so we must squelch it here.
-fcmp_res_qnan:
-	bsr.l		res_qnan
-	andi.b		&0xf7,FPSR_CC(%a6)
-	rts
-fcmp_res_snan:
-	bsr.l		res_snan
-	andi.b		&0xf7,FPSR_CC(%a6)
-	rts
-
-#
-# DENORMs are a little more difficult.
-# If you have a 2 DENORMs, then you can just force the j-bit to a one
-# and use the fcmp_norm routine.
-# If you have a DENORM and an INF or ZERO, just force the DENORM's j-bit to a one
-# and use the fcmp_norm routine.
-# If you have a DENORM and a NORM with opposite signs, then use fcmp_norm, also.
-# But with a DENORM and a NORM of the same sign, the neg bit is set if the
-# (1) signs are (+) and the DENORM is the dst or
-# (2) signs are (-) and the DENORM is the src
-#
-
-fcmp_dnrm_s:
-	mov.w		SRC_EX(%a0),FP_SCR0_EX(%a6)
-	mov.l		SRC_HI(%a0),%d0
-	bset		&31,%d0			# DENORM src; make into small norm
-	mov.l		%d0,FP_SCR0_HI(%a6)
-	mov.l		SRC_LO(%a0),FP_SCR0_LO(%a6)
-	lea		FP_SCR0(%a6),%a0
-	bra.w		fcmp_norm
-
-fcmp_dnrm_d:
-	mov.l		DST_EX(%a1),FP_SCR0_EX(%a6)
-	mov.l		DST_HI(%a1),%d0
-	bset		&31,%d0			# DENORM src; make into small norm
-	mov.l		%d0,FP_SCR0_HI(%a6)
-	mov.l		DST_LO(%a1),FP_SCR0_LO(%a6)
-	lea		FP_SCR0(%a6),%a1
-	bra.w		fcmp_norm
-
-fcmp_dnrm_sd:
-	mov.w		DST_EX(%a1),FP_SCR1_EX(%a6)
-	mov.w		SRC_EX(%a0),FP_SCR0_EX(%a6)
-	mov.l		DST_HI(%a1),%d0
-	bset		&31,%d0			# DENORM dst; make into small norm
-	mov.l		%d0,FP_SCR1_HI(%a6)
-	mov.l		SRC_HI(%a0),%d0
-	bset		&31,%d0			# DENORM dst; make into small norm
-	mov.l		%d0,FP_SCR0_HI(%a6)
-	mov.l		DST_LO(%a1),FP_SCR1_LO(%a6)
-	mov.l		SRC_LO(%a0),FP_SCR0_LO(%a6)
-	lea		FP_SCR1(%a6),%a1
-	lea		FP_SCR0(%a6),%a0
-	bra.w		fcmp_norm
-
-fcmp_nrm_dnrm:
-	mov.b		SRC_EX(%a0),%d0		# determine if like signs
-	mov.b		DST_EX(%a1),%d1
-	eor.b		%d0,%d1
-	bmi.w		fcmp_dnrm_s
-
-# signs are the same, so must determine the answer ourselves.
-	tst.b		%d0			# is src op negative?
-	bmi.b		fcmp_nrm_dnrm_m		# yes
-	rts
-fcmp_nrm_dnrm_m:
-	mov.b		&neg_bmask,FPSR_CC(%a6)	# set 'Z' ccode bit
-	rts
-
-fcmp_dnrm_nrm:
-	mov.b		SRC_EX(%a0),%d0		# determine if like signs
-	mov.b		DST_EX(%a1),%d1
-	eor.b		%d0,%d1
-	bmi.w		fcmp_dnrm_d
-
-# signs are the same, so must determine the answer ourselves.
-	tst.b		%d0			# is src op negative?
-	bpl.b		fcmp_dnrm_nrm_m		# no
-	rts
-fcmp_dnrm_nrm_m:
-	mov.b		&neg_bmask,FPSR_CC(%a6)	# set 'Z' ccode bit
-	rts
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	fsglmul(): emulates the fsglmul instruction			#
-#									#
-# XREF ****************************************************************	#
-#	scale_to_zero_src() - scale src exponent to zero		#
-#	scale_to_zero_dst() - scale dst exponent to zero		#
-#	unf_res4() - return default underflow result for sglop		#
-#	ovf_res() - return default overflow result			#
-#	res_qnan() - return QNAN result					#
-#	res_snan() - return SNAN result					#
-#									#
-# INPUT ***************************************************************	#
-#	a0 = pointer to extended precision source operand		#
-#	a1 = pointer to extended precision destination operand		#
-#	d0  rnd prec,mode						#
-#									#
-# OUTPUT **************************************************************	#
-#	fp0 = result							#
-#	fp1 = EXOP (if exception occurred)				#
-#									#
-# ALGORITHM ***********************************************************	#
-#	Handle NANs, infinities, and zeroes as special cases. Divide	#
-# norms/denorms into ext/sgl/dbl precision.				#
-#	For norms/denorms, scale the exponents such that a multiply	#
-# instruction won't cause an exception. Use the regular fsglmul to	#
-# compute a result. Check if the regular operands would have taken	#
-# an exception. If so, return the default overflow/underflow result	#
-# and return the EXOP if exceptions are enabled. Else, scale the	#
-# result operand to the proper exponent.				#
-#									#
-#########################################################################
-
-	global		fsglmul
-fsglmul:
-	mov.l		%d0,L_SCR3(%a6)		# store rnd info
-
-	clr.w		%d1
-	mov.b		DTAG(%a6),%d1
-	lsl.b		&0x3,%d1
-	or.b		STAG(%a6),%d1
-
-	bne.w		fsglmul_not_norm	# optimize on non-norm input
-
-fsglmul_norm:
-	mov.w		DST_EX(%a1),FP_SCR1_EX(%a6)
-	mov.l		DST_HI(%a1),FP_SCR1_HI(%a6)
-	mov.l		DST_LO(%a1),FP_SCR1_LO(%a6)
-
-	mov.w		SRC_EX(%a0),FP_SCR0_EX(%a6)
-	mov.l		SRC_HI(%a0),FP_SCR0_HI(%a6)
-	mov.l		SRC_LO(%a0),FP_SCR0_LO(%a6)
-
-	bsr.l		scale_to_zero_src	# scale exponent
-	mov.l		%d0,-(%sp)		# save scale factor 1
-
-	bsr.l		scale_to_zero_dst	# scale dst exponent
-
-	add.l		(%sp)+,%d0		# SCALE_FACTOR = scale1 + scale2
-
-	cmpi.l		%d0,&0x3fff-0x7ffe	# would result ovfl?
-	beq.w		fsglmul_may_ovfl	# result may rnd to overflow
-	blt.w		fsglmul_ovfl		# result will overflow
-
-	cmpi.l		%d0,&0x3fff+0x0001	# would result unfl?
-	beq.w		fsglmul_may_unfl	# result may rnd to no unfl
-	bgt.w		fsglmul_unfl		# result will underflow
-
-fsglmul_normal:
-	fmovm.x		FP_SCR1(%a6),&0x80	# load dst op
-
-	fmov.l		L_SCR3(%a6),%fpcr	# set FPCR
-	fmov.l		&0x0,%fpsr		# clear FPSR
-
-	fsglmul.x	FP_SCR0(%a6),%fp0	# execute sgl multiply
-
-	fmov.l		%fpsr,%d1		# save status
-	fmov.l		&0x0,%fpcr		# clear FPCR
-
-	or.l		%d1,USER_FPSR(%a6)	# save INEX2,N
-
-fsglmul_normal_exit:
-	fmovm.x		&0x80,FP_SCR0(%a6)	# store out result
-	mov.l		%d2,-(%sp)		# save d2
-	mov.w		FP_SCR0_EX(%a6),%d1	# load {sgn,exp}
-	mov.l		%d1,%d2			# make a copy
-	andi.l		&0x7fff,%d1		# strip sign
-	andi.w		&0x8000,%d2		# keep old sign
-	sub.l		%d0,%d1			# add scale factor
-	or.w		%d2,%d1			# concat old sign,new exp
-	mov.w		%d1,FP_SCR0_EX(%a6)	# insert new exponent
-	mov.l		(%sp)+,%d2		# restore d2
-	fmovm.x		FP_SCR0(%a6),&0x80	# return result in fp0
-	rts
-
-fsglmul_ovfl:
-	fmovm.x		FP_SCR1(%a6),&0x80	# load dst op
-
-	fmov.l		L_SCR3(%a6),%fpcr	# set FPCR
-	fmov.l		&0x0,%fpsr		# clear FPSR
-
-	fsglmul.x	FP_SCR0(%a6),%fp0	# execute sgl multiply
-
-	fmov.l		%fpsr,%d1		# save status
-	fmov.l		&0x0,%fpcr		# clear FPCR
-
-	or.l		%d1,USER_FPSR(%a6)	# save INEX2,N
-
-fsglmul_ovfl_tst:
-
-# save setting this until now because this is where fsglmul_may_ovfl may jump in
-	or.l		&ovfl_inx_mask, USER_FPSR(%a6) # set ovfl/aovfl/ainex
-
-	mov.b		FPCR_ENABLE(%a6),%d1
-	andi.b		&0x13,%d1		# is OVFL or INEX enabled?
-	bne.b		fsglmul_ovfl_ena	# yes
-
-fsglmul_ovfl_dis:
-	btst		&neg_bit,FPSR_CC(%a6)	# is result negative?
-	sne		%d1			# set sign param accordingly
-	mov.l		L_SCR3(%a6),%d0		# pass prec:rnd
-	andi.b		&0x30,%d0		# force prec = ext
-	bsr.l		ovf_res			# calculate default result
-	or.b		%d0,FPSR_CC(%a6)	# set INF,N if applicable
-	fmovm.x		(%a0),&0x80		# return default result in fp0
-	rts
-
-fsglmul_ovfl_ena:
-	fmovm.x		&0x80,FP_SCR0(%a6)	# move result to stack
-
-	mov.l		%d2,-(%sp)		# save d2
-	mov.w		FP_SCR0_EX(%a6),%d1	# fetch {sgn,exp}
-	mov.l		%d1,%d2			# make a copy
-	andi.l		&0x7fff,%d1		# strip sign
-	sub.l		%d0,%d1			# add scale factor
-	subi.l		&0x6000,%d1		# subtract bias
-	andi.w		&0x7fff,%d1
-	andi.w		&0x8000,%d2		# keep old sign
-	or.w		%d2,%d1			# concat old sign,new exp
-	mov.w		%d1,FP_SCR0_EX(%a6)	# insert new exponent
-	mov.l		(%sp)+,%d2		# restore d2
-	fmovm.x		FP_SCR0(%a6),&0x40	# return EXOP in fp1
-	bra.b		fsglmul_ovfl_dis
-
-fsglmul_may_ovfl:
-	fmovm.x		FP_SCR1(%a6),&0x80	# load dst op
-
-	fmov.l		L_SCR3(%a6),%fpcr	# set FPCR
-	fmov.l		&0x0,%fpsr		# clear FPSR
-
-	fsglmul.x	FP_SCR0(%a6),%fp0	# execute sgl multiply
-
-	fmov.l		%fpsr,%d1		# save status
-	fmov.l		&0x0,%fpcr		# clear FPCR
-
-	or.l		%d1,USER_FPSR(%a6)	# save INEX2,N
-
-	fabs.x		%fp0,%fp1		# make a copy of result
-	fcmp.b		%fp1,&0x2		# is |result| >= 2.b?
-	fbge.w		fsglmul_ovfl_tst	# yes; overflow has occurred
-
-# no, it didn't overflow; we have correct result
-	bra.w		fsglmul_normal_exit
-
-fsglmul_unfl:
-	bset		&unfl_bit,FPSR_EXCEPT(%a6) # set unfl exc bit
-
-	fmovm.x		FP_SCR1(%a6),&0x80	# load dst op
-
-	fmov.l		&rz_mode*0x10,%fpcr	# set FPCR
-	fmov.l		&0x0,%fpsr		# clear FPSR
-
-	fsglmul.x	FP_SCR0(%a6),%fp0	# execute sgl multiply
-
-	fmov.l		%fpsr,%d1		# save status
-	fmov.l		&0x0,%fpcr		# clear FPCR
-
-	or.l		%d1,USER_FPSR(%a6)	# save INEX2,N
-
-	mov.b		FPCR_ENABLE(%a6),%d1
-	andi.b		&0x0b,%d1		# is UNFL or INEX enabled?
-	bne.b		fsglmul_unfl_ena	# yes
-
-fsglmul_unfl_dis:
-	fmovm.x		&0x80,FP_SCR0(%a6)	# store out result
-
-	lea		FP_SCR0(%a6),%a0	# pass: result addr
-	mov.l		L_SCR3(%a6),%d1		# pass: rnd prec,mode
-	bsr.l		unf_res4		# calculate default result
-	or.b		%d0,FPSR_CC(%a6)	# 'Z' bit may have been set
-	fmovm.x		FP_SCR0(%a6),&0x80	# return default result in fp0
-	rts
-
-#
-# UNFL is enabled.
-#
-fsglmul_unfl_ena:
-	fmovm.x		FP_SCR1(%a6),&0x40	# load dst op
-
-	fmov.l		L_SCR3(%a6),%fpcr	# set FPCR
-	fmov.l		&0x0,%fpsr		# clear FPSR
-
-	fsglmul.x	FP_SCR0(%a6),%fp1	# execute sgl multiply
-
-	fmov.l		&0x0,%fpcr		# clear FPCR
-
-	fmovm.x		&0x40,FP_SCR0(%a6)	# save result to stack
-	mov.l		%d2,-(%sp)		# save d2
-	mov.w		FP_SCR0_EX(%a6),%d1	# fetch {sgn,exp}
-	mov.l		%d1,%d2			# make a copy
-	andi.l		&0x7fff,%d1		# strip sign
-	andi.w		&0x8000,%d2		# keep old sign
-	sub.l		%d0,%d1			# add scale factor
-	addi.l		&0x6000,%d1		# add bias
-	andi.w		&0x7fff,%d1
-	or.w		%d2,%d1			# concat old sign,new exp
-	mov.w		%d1,FP_SCR0_EX(%a6)	# insert new exponent
-	mov.l		(%sp)+,%d2		# restore d2
-	fmovm.x		FP_SCR0(%a6),&0x40	# return EXOP in fp1
-	bra.w		fsglmul_unfl_dis
-
-fsglmul_may_unfl:
-	fmovm.x		FP_SCR1(%a6),&0x80	# load dst op
-
-	fmov.l		L_SCR3(%a6),%fpcr	# set FPCR
-	fmov.l		&0x0,%fpsr		# clear FPSR
-
-	fsglmul.x	FP_SCR0(%a6),%fp0	# execute sgl multiply
-
-	fmov.l		%fpsr,%d1		# save status
-	fmov.l		&0x0,%fpcr		# clear FPCR
-
-	or.l		%d1,USER_FPSR(%a6)	# save INEX2,N
-
-	fabs.x		%fp0,%fp1		# make a copy of result
-	fcmp.b		%fp1,&0x2		# is |result| > 2.b?
-	fbgt.w		fsglmul_normal_exit	# no; no underflow occurred
-	fblt.w		fsglmul_unfl		# yes; underflow occurred
-
-#
-# we still don't know if underflow occurred. result is ~ equal to 2. but,
-# we don't know if the result was an underflow that rounded up to a 2 or
-# a normalized number that rounded down to a 2. so, redo the entire operation
-# using RZ as the rounding mode to see what the pre-rounded result is.
-# this case should be relatively rare.
-#
-	fmovm.x		FP_SCR1(%a6),&0x40	# load dst op into fp1
-
-	mov.l		L_SCR3(%a6),%d1
-	andi.b		&0xc0,%d1		# keep rnd prec
-	ori.b		&rz_mode*0x10,%d1	# insert RZ
-
-	fmov.l		%d1,%fpcr		# set FPCR
-	fmov.l		&0x0,%fpsr		# clear FPSR
-
-	fsglmul.x	FP_SCR0(%a6),%fp1	# execute sgl multiply
-
-	fmov.l		&0x0,%fpcr		# clear FPCR
-	fabs.x		%fp1			# make absolute value
-	fcmp.b		%fp1,&0x2		# is |result| < 2.b?
-	fbge.w		fsglmul_normal_exit	# no; no underflow occurred
-	bra.w		fsglmul_unfl		# yes, underflow occurred
-
-##############################################################################
-
-#
-# Single Precision Multiply: inputs are not both normalized; what are they?
-#
-fsglmul_not_norm:
-	mov.w		(tbl_fsglmul_op.b,%pc,%d1.w*2),%d1
-	jmp		(tbl_fsglmul_op.b,%pc,%d1.w*1)
-
-	swbeg		&48
-tbl_fsglmul_op:
-	short		fsglmul_norm		- tbl_fsglmul_op # NORM x NORM
-	short		fsglmul_zero		- tbl_fsglmul_op # NORM x ZERO
-	short		fsglmul_inf_src		- tbl_fsglmul_op # NORM x INF
-	short		fsglmul_res_qnan	- tbl_fsglmul_op # NORM x QNAN
-	short		fsglmul_norm		- tbl_fsglmul_op # NORM x DENORM
-	short		fsglmul_res_snan	- tbl_fsglmul_op # NORM x SNAN
-	short		tbl_fsglmul_op		- tbl_fsglmul_op #
-	short		tbl_fsglmul_op		- tbl_fsglmul_op #
-
-	short		fsglmul_zero		- tbl_fsglmul_op # ZERO x NORM
-	short		fsglmul_zero		- tbl_fsglmul_op # ZERO x ZERO
-	short		fsglmul_res_operr	- tbl_fsglmul_op # ZERO x INF
-	short		fsglmul_res_qnan	- tbl_fsglmul_op # ZERO x QNAN
-	short		fsglmul_zero		- tbl_fsglmul_op # ZERO x DENORM
-	short		fsglmul_res_snan	- tbl_fsglmul_op # ZERO x SNAN
-	short		tbl_fsglmul_op		- tbl_fsglmul_op #
-	short		tbl_fsglmul_op		- tbl_fsglmul_op #
-
-	short		fsglmul_inf_dst		- tbl_fsglmul_op # INF x NORM
-	short		fsglmul_res_operr	- tbl_fsglmul_op # INF x ZERO
-	short		fsglmul_inf_dst		- tbl_fsglmul_op # INF x INF
-	short		fsglmul_res_qnan	- tbl_fsglmul_op # INF x QNAN
-	short		fsglmul_inf_dst		- tbl_fsglmul_op # INF x DENORM
-	short		fsglmul_res_snan	- tbl_fsglmul_op # INF x SNAN
-	short		tbl_fsglmul_op		- tbl_fsglmul_op #
-	short		tbl_fsglmul_op		- tbl_fsglmul_op #
-
-	short		fsglmul_res_qnan	- tbl_fsglmul_op # QNAN x NORM
-	short		fsglmul_res_qnan	- tbl_fsglmul_op # QNAN x ZERO
-	short		fsglmul_res_qnan	- tbl_fsglmul_op # QNAN x INF
-	short		fsglmul_res_qnan	- tbl_fsglmul_op # QNAN x QNAN
-	short		fsglmul_res_qnan	- tbl_fsglmul_op # QNAN x DENORM
-	short		fsglmul_res_snan	- tbl_fsglmul_op # QNAN x SNAN
-	short		tbl_fsglmul_op		- tbl_fsglmul_op #
-	short		tbl_fsglmul_op		- tbl_fsglmul_op #
-
-	short		fsglmul_norm		- tbl_fsglmul_op # NORM x NORM
-	short		fsglmul_zero		- tbl_fsglmul_op # NORM x ZERO
-	short		fsglmul_inf_src		- tbl_fsglmul_op # NORM x INF
-	short		fsglmul_res_qnan	- tbl_fsglmul_op # NORM x QNAN
-	short		fsglmul_norm		- tbl_fsglmul_op # NORM x DENORM
-	short		fsglmul_res_snan	- tbl_fsglmul_op # NORM x SNAN
-	short		tbl_fsglmul_op		- tbl_fsglmul_op #
-	short		tbl_fsglmul_op		- tbl_fsglmul_op #
-
-	short		fsglmul_res_snan	- tbl_fsglmul_op # SNAN x NORM
-	short		fsglmul_res_snan	- tbl_fsglmul_op # SNAN x ZERO
-	short		fsglmul_res_snan	- tbl_fsglmul_op # SNAN x INF
-	short		fsglmul_res_snan	- tbl_fsglmul_op # SNAN x QNAN
-	short		fsglmul_res_snan	- tbl_fsglmul_op # SNAN x DENORM
-	short		fsglmul_res_snan	- tbl_fsglmul_op # SNAN x SNAN
-	short		tbl_fsglmul_op		- tbl_fsglmul_op #
-	short		tbl_fsglmul_op		- tbl_fsglmul_op #
-
-fsglmul_res_operr:
-	bra.l		res_operr
-fsglmul_res_snan:
-	bra.l		res_snan
-fsglmul_res_qnan:
-	bra.l		res_qnan
-fsglmul_zero:
-	bra.l		fmul_zero
-fsglmul_inf_src:
-	bra.l		fmul_inf_src
-fsglmul_inf_dst:
-	bra.l		fmul_inf_dst
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	fsgldiv(): emulates the fsgldiv instruction			#
-#									#
-# XREF ****************************************************************	#
-#	scale_to_zero_src() - scale src exponent to zero		#
-#	scale_to_zero_dst() - scale dst exponent to zero		#
-#	unf_res4() - return default underflow result for sglop		#
-#	ovf_res() - return default overflow result			#
-#	res_qnan() - return QNAN result					#
-#	res_snan() - return SNAN result					#
-#									#
-# INPUT ***************************************************************	#
-#	a0 = pointer to extended precision source operand		#
-#	a1 = pointer to extended precision destination operand		#
-#	d0  rnd prec,mode						#
-#									#
-# OUTPUT **************************************************************	#
-#	fp0 = result							#
-#	fp1 = EXOP (if exception occurred)				#
-#									#
-# ALGORITHM ***********************************************************	#
-#	Handle NANs, infinities, and zeroes as special cases. Divide	#
-# norms/denorms into ext/sgl/dbl precision.				#
-#	For norms/denorms, scale the exponents such that a divide	#
-# instruction won't cause an exception. Use the regular fsgldiv to	#
-# compute a result. Check if the regular operands would have taken	#
-# an exception. If so, return the default overflow/underflow result	#
-# and return the EXOP if exceptions are enabled. Else, scale the	#
-# result operand to the proper exponent.				#
-#									#
-#########################################################################
-
-	global		fsgldiv
-fsgldiv:
-	mov.l		%d0,L_SCR3(%a6)		# store rnd info
-
-	clr.w		%d1
-	mov.b		DTAG(%a6),%d1
-	lsl.b		&0x3,%d1
-	or.b		STAG(%a6),%d1		# combine src tags
-
-	bne.w		fsgldiv_not_norm	# optimize on non-norm input
-
-#
-# DIVIDE: NORMs and DENORMs ONLY!
-#
-fsgldiv_norm:
-	mov.w		DST_EX(%a1),FP_SCR1_EX(%a6)
-	mov.l		DST_HI(%a1),FP_SCR1_HI(%a6)
-	mov.l		DST_LO(%a1),FP_SCR1_LO(%a6)
-
-	mov.w		SRC_EX(%a0),FP_SCR0_EX(%a6)
-	mov.l		SRC_HI(%a0),FP_SCR0_HI(%a6)
-	mov.l		SRC_LO(%a0),FP_SCR0_LO(%a6)
-
-	bsr.l		scale_to_zero_src	# calculate scale factor 1
-	mov.l		%d0,-(%sp)		# save scale factor 1
-
-	bsr.l		scale_to_zero_dst	# calculate scale factor 2
-
-	neg.l		(%sp)			# S.F. = scale1 - scale2
-	add.l		%d0,(%sp)
-
-	mov.w		2+L_SCR3(%a6),%d1	# fetch precision,mode
-	lsr.b		&0x6,%d1
-	mov.l		(%sp)+,%d0
-	cmpi.l		%d0,&0x3fff-0x7ffe
-	ble.w		fsgldiv_may_ovfl
-
-	cmpi.l		%d0,&0x3fff-0x0000	# will result underflow?
-	beq.w		fsgldiv_may_unfl	# maybe
-	bgt.w		fsgldiv_unfl		# yes; go handle underflow
-
-fsgldiv_normal:
-	fmovm.x		FP_SCR1(%a6),&0x80	# load dst op
-
-	fmov.l		L_SCR3(%a6),%fpcr	# save FPCR
-	fmov.l		&0x0,%fpsr		# clear FPSR
-
-	fsgldiv.x	FP_SCR0(%a6),%fp0	# perform sgl divide
-
-	fmov.l		%fpsr,%d1		# save FPSR
-	fmov.l		&0x0,%fpcr		# clear FPCR
-
-	or.l		%d1,USER_FPSR(%a6)	# save INEX2,N
-
-fsgldiv_normal_exit:
-	fmovm.x		&0x80,FP_SCR0(%a6)	# store result on stack
-	mov.l		%d2,-(%sp)		# save d2
-	mov.w		FP_SCR0_EX(%a6),%d1	# load {sgn,exp}
-	mov.l		%d1,%d2			# make a copy
-	andi.l		&0x7fff,%d1		# strip sign
-	andi.w		&0x8000,%d2		# keep old sign
-	sub.l		%d0,%d1			# add scale factor
-	or.w		%d2,%d1			# concat old sign,new exp
-	mov.w		%d1,FP_SCR0_EX(%a6)	# insert new exponent
-	mov.l		(%sp)+,%d2		# restore d2
-	fmovm.x		FP_SCR0(%a6),&0x80	# return result in fp0
-	rts
-
-fsgldiv_may_ovfl:
-	fmovm.x		FP_SCR1(%a6),&0x80	# load dst op
-
-	fmov.l		L_SCR3(%a6),%fpcr	# set FPCR
-	fmov.l		&0x0,%fpsr		# set FPSR
-
-	fsgldiv.x	FP_SCR0(%a6),%fp0	# execute divide
-
-	fmov.l		%fpsr,%d1
-	fmov.l		&0x0,%fpcr
-
-	or.l		%d1,USER_FPSR(%a6)	# save INEX,N
-
-	fmovm.x		&0x01,-(%sp)		# save result to stack
-	mov.w		(%sp),%d1		# fetch new exponent
-	add.l		&0xc,%sp		# clear result
-	andi.l		&0x7fff,%d1		# strip sign
-	sub.l		%d0,%d1			# add scale factor
-	cmp.l		%d1,&0x7fff		# did divide overflow?
-	blt.b		fsgldiv_normal_exit
-
-fsgldiv_ovfl_tst:
-	or.w		&ovfl_inx_mask,2+USER_FPSR(%a6) # set ovfl/aovfl/ainex
-
-	mov.b		FPCR_ENABLE(%a6),%d1
-	andi.b		&0x13,%d1		# is OVFL or INEX enabled?
-	bne.b		fsgldiv_ovfl_ena	# yes
-
-fsgldiv_ovfl_dis:
-	btst		&neg_bit,FPSR_CC(%a6)	# is result negative
-	sne		%d1			# set sign param accordingly
-	mov.l		L_SCR3(%a6),%d0		# pass prec:rnd
-	andi.b		&0x30,%d0		# kill precision
-	bsr.l		ovf_res			# calculate default result
-	or.b		%d0,FPSR_CC(%a6)	# set INF if applicable
-	fmovm.x		(%a0),&0x80		# return default result in fp0
-	rts
-
-fsgldiv_ovfl_ena:
-	fmovm.x		&0x80,FP_SCR0(%a6)	# move result to stack
-
-	mov.l		%d2,-(%sp)		# save d2
-	mov.w		FP_SCR0_EX(%a6),%d1	# fetch {sgn,exp}
-	mov.l		%d1,%d2			# make a copy
-	andi.l		&0x7fff,%d1		# strip sign
-	andi.w		&0x8000,%d2		# keep old sign
-	sub.l		%d0,%d1			# add scale factor
-	subi.l		&0x6000,%d1		# subtract new bias
-	andi.w		&0x7fff,%d1		# clear ms bit
-	or.w		%d2,%d1			# concat old sign,new exp
-	mov.w		%d1,FP_SCR0_EX(%a6)	# insert new exponent
-	mov.l		(%sp)+,%d2		# restore d2
-	fmovm.x		FP_SCR0(%a6),&0x40	# return EXOP in fp1
-	bra.b		fsgldiv_ovfl_dis
-
-fsgldiv_unfl:
-	bset		&unfl_bit,FPSR_EXCEPT(%a6) # set unfl exc bit
-
-	fmovm.x		FP_SCR1(%a6),&0x80	# load dst op
-
-	fmov.l		&rz_mode*0x10,%fpcr	# set FPCR
-	fmov.l		&0x0,%fpsr		# clear FPSR
-
-	fsgldiv.x	FP_SCR0(%a6),%fp0	# execute sgl divide
-
-	fmov.l		%fpsr,%d1		# save status
-	fmov.l		&0x0,%fpcr		# clear FPCR
-
-	or.l		%d1,USER_FPSR(%a6)	# save INEX2,N
-
-	mov.b		FPCR_ENABLE(%a6),%d1
-	andi.b		&0x0b,%d1		# is UNFL or INEX enabled?
-	bne.b		fsgldiv_unfl_ena	# yes
-
-fsgldiv_unfl_dis:
-	fmovm.x		&0x80,FP_SCR0(%a6)	# store out result
-
-	lea		FP_SCR0(%a6),%a0	# pass: result addr
-	mov.l		L_SCR3(%a6),%d1		# pass: rnd prec,mode
-	bsr.l		unf_res4		# calculate default result
-	or.b		%d0,FPSR_CC(%a6)	# 'Z' bit may have been set
-	fmovm.x		FP_SCR0(%a6),&0x80	# return default result in fp0
-	rts
-
-#
-# UNFL is enabled.
-#
-fsgldiv_unfl_ena:
-	fmovm.x		FP_SCR1(%a6),&0x40	# load dst op
-
-	fmov.l		L_SCR3(%a6),%fpcr	# set FPCR
-	fmov.l		&0x0,%fpsr		# clear FPSR
-
-	fsgldiv.x	FP_SCR0(%a6),%fp1	# execute sgl divide
-
-	fmov.l		&0x0,%fpcr		# clear FPCR
-
-	fmovm.x		&0x40,FP_SCR0(%a6)	# save result to stack
-	mov.l		%d2,-(%sp)		# save d2
-	mov.w		FP_SCR0_EX(%a6),%d1	# fetch {sgn,exp}
-	mov.l		%d1,%d2			# make a copy
-	andi.l		&0x7fff,%d1		# strip sign
-	andi.w		&0x8000,%d2		# keep old sign
-	sub.l		%d0,%d1			# add scale factor
-	addi.l		&0x6000,%d1		# add bias
-	andi.w		&0x7fff,%d1		# clear top bit
-	or.w		%d2,%d1			# concat old sign, new exp
-	mov.w		%d1,FP_SCR0_EX(%a6)	# insert new exponent
-	mov.l		(%sp)+,%d2		# restore d2
-	fmovm.x		FP_SCR0(%a6),&0x40	# return EXOP in fp1
-	bra.b		fsgldiv_unfl_dis
-
-#
-# the divide operation MAY underflow:
-#
-fsgldiv_may_unfl:
-	fmovm.x		FP_SCR1(%a6),&0x80	# load dst op
-
-	fmov.l		L_SCR3(%a6),%fpcr	# set FPCR
-	fmov.l		&0x0,%fpsr		# clear FPSR
-
-	fsgldiv.x	FP_SCR0(%a6),%fp0	# execute sgl divide
-
-	fmov.l		%fpsr,%d1		# save status
-	fmov.l		&0x0,%fpcr		# clear FPCR
-
-	or.l		%d1,USER_FPSR(%a6)	# save INEX2,N
-
-	fabs.x		%fp0,%fp1		# make a copy of result
-	fcmp.b		%fp1,&0x1		# is |result| > 1.b?
-	fbgt.w		fsgldiv_normal_exit	# no; no underflow occurred
-	fblt.w		fsgldiv_unfl		# yes; underflow occurred
-
-#
-# we still don't know if underflow occurred. result is ~ equal to 1. but,
-# we don't know if the result was an underflow that rounded up to a 1
-# or a normalized number that rounded down to a 1. so, redo the entire
-# operation using RZ as the rounding mode to see what the pre-rounded
-# result is. this case should be relatively rare.
-#
-	fmovm.x		FP_SCR1(%a6),&0x40	# load dst op into %fp1
-
-	clr.l		%d1			# clear scratch register
-	ori.b		&rz_mode*0x10,%d1	# force RZ rnd mode
-
-	fmov.l		%d1,%fpcr		# set FPCR
-	fmov.l		&0x0,%fpsr		# clear FPSR
-
-	fsgldiv.x	FP_SCR0(%a6),%fp1	# execute sgl divide
-
-	fmov.l		&0x0,%fpcr		# clear FPCR
-	fabs.x		%fp1			# make absolute value
-	fcmp.b		%fp1,&0x1		# is |result| < 1.b?
-	fbge.w		fsgldiv_normal_exit	# no; no underflow occurred
-	bra.w		fsgldiv_unfl		# yes; underflow occurred
-
-############################################################################
-
-#
-# Divide: inputs are not both normalized; what are they?
-#
-fsgldiv_not_norm:
-	mov.w		(tbl_fsgldiv_op.b,%pc,%d1.w*2),%d1
-	jmp		(tbl_fsgldiv_op.b,%pc,%d1.w*1)
-
-	swbeg		&48
-tbl_fsgldiv_op:
-	short		fsgldiv_norm		- tbl_fsgldiv_op # NORM / NORM
-	short		fsgldiv_inf_load	- tbl_fsgldiv_op # NORM / ZERO
-	short		fsgldiv_zero_load	- tbl_fsgldiv_op # NORM / INF
-	short		fsgldiv_res_qnan	- tbl_fsgldiv_op # NORM / QNAN
-	short		fsgldiv_norm		- tbl_fsgldiv_op # NORM / DENORM
-	short		fsgldiv_res_snan	- tbl_fsgldiv_op # NORM / SNAN
-	short		tbl_fsgldiv_op		- tbl_fsgldiv_op #
-	short		tbl_fsgldiv_op		- tbl_fsgldiv_op #
-
-	short		fsgldiv_zero_load	- tbl_fsgldiv_op # ZERO / NORM
-	short		fsgldiv_res_operr	- tbl_fsgldiv_op # ZERO / ZERO
-	short		fsgldiv_zero_load	- tbl_fsgldiv_op # ZERO / INF
-	short		fsgldiv_res_qnan	- tbl_fsgldiv_op # ZERO / QNAN
-	short		fsgldiv_zero_load	- tbl_fsgldiv_op # ZERO / DENORM
-	short		fsgldiv_res_snan	- tbl_fsgldiv_op # ZERO / SNAN
-	short		tbl_fsgldiv_op		- tbl_fsgldiv_op #
-	short		tbl_fsgldiv_op		- tbl_fsgldiv_op #
-
-	short		fsgldiv_inf_dst		- tbl_fsgldiv_op # INF / NORM
-	short		fsgldiv_inf_dst		- tbl_fsgldiv_op # INF / ZERO
-	short		fsgldiv_res_operr	- tbl_fsgldiv_op # INF / INF
-	short		fsgldiv_res_qnan	- tbl_fsgldiv_op # INF / QNAN
-	short		fsgldiv_inf_dst		- tbl_fsgldiv_op # INF / DENORM
-	short		fsgldiv_res_snan	- tbl_fsgldiv_op # INF / SNAN
-	short		tbl_fsgldiv_op		- tbl_fsgldiv_op #
-	short		tbl_fsgldiv_op		- tbl_fsgldiv_op #
-
-	short		fsgldiv_res_qnan	- tbl_fsgldiv_op # QNAN / NORM
-	short		fsgldiv_res_qnan	- tbl_fsgldiv_op # QNAN / ZERO
-	short		fsgldiv_res_qnan	- tbl_fsgldiv_op # QNAN / INF
-	short		fsgldiv_res_qnan	- tbl_fsgldiv_op # QNAN / QNAN
-	short		fsgldiv_res_qnan	- tbl_fsgldiv_op # QNAN / DENORM
-	short		fsgldiv_res_snan	- tbl_fsgldiv_op # QNAN / SNAN
-	short		tbl_fsgldiv_op		- tbl_fsgldiv_op #
-	short		tbl_fsgldiv_op		- tbl_fsgldiv_op #
-
-	short		fsgldiv_norm		- tbl_fsgldiv_op # DENORM / NORM
-	short		fsgldiv_inf_load	- tbl_fsgldiv_op # DENORM / ZERO
-	short		fsgldiv_zero_load	- tbl_fsgldiv_op # DENORM / INF
-	short		fsgldiv_res_qnan	- tbl_fsgldiv_op # DENORM / QNAN
-	short		fsgldiv_norm		- tbl_fsgldiv_op # DENORM / DENORM
-	short		fsgldiv_res_snan	- tbl_fsgldiv_op # DENORM / SNAN
-	short		tbl_fsgldiv_op		- tbl_fsgldiv_op #
-	short		tbl_fsgldiv_op		- tbl_fsgldiv_op #
-
-	short		fsgldiv_res_snan	- tbl_fsgldiv_op # SNAN / NORM
-	short		fsgldiv_res_snan	- tbl_fsgldiv_op # SNAN / ZERO
-	short		fsgldiv_res_snan	- tbl_fsgldiv_op # SNAN / INF
-	short		fsgldiv_res_snan	- tbl_fsgldiv_op # SNAN / QNAN
-	short		fsgldiv_res_snan	- tbl_fsgldiv_op # SNAN / DENORM
-	short		fsgldiv_res_snan	- tbl_fsgldiv_op # SNAN / SNAN
-	short		tbl_fsgldiv_op		- tbl_fsgldiv_op #
-	short		tbl_fsgldiv_op		- tbl_fsgldiv_op #
-
-fsgldiv_res_qnan:
-	bra.l		res_qnan
-fsgldiv_res_snan:
-	bra.l		res_snan
-fsgldiv_res_operr:
-	bra.l		res_operr
-fsgldiv_inf_load:
-	bra.l		fdiv_inf_load
-fsgldiv_zero_load:
-	bra.l		fdiv_zero_load
-fsgldiv_inf_dst:
-	bra.l		fdiv_inf_dst
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	fadd(): emulates the fadd instruction				#
-#	fsadd(): emulates the fadd instruction				#
-#	fdadd(): emulates the fdadd instruction				#
-#									#
-# XREF ****************************************************************	#
-#	addsub_scaler2() - scale the operands so they won't take exc	#
-#	ovf_res() - return default overflow result			#
-#	unf_res() - return default underflow result			#
-#	res_qnan() - set QNAN result					#
-#	res_snan() - set SNAN result					#
-#	res_operr() - set OPERR result					#
-#	scale_to_zero_src() - set src operand exponent equal to zero	#
-#	scale_to_zero_dst() - set dst operand exponent equal to zero	#
-#									#
-# INPUT ***************************************************************	#
-#	a0 = pointer to extended precision source operand		#
-#	a1 = pointer to extended precision destination operand		#
-#									#
-# OUTPUT **************************************************************	#
-#	fp0 = result							#
-#	fp1 = EXOP (if exception occurred)				#
-#									#
-# ALGORITHM ***********************************************************	#
-#	Handle NANs, infinities, and zeroes as special cases. Divide	#
-# norms into extended, single, and double precision.			#
-#	Do addition after scaling exponents such that exception won't	#
-# occur. Then, check result exponent to see if exception would have	#
-# occurred. If so, return default result and maybe EXOP. Else, insert	#
-# the correct result exponent and return. Set FPSR bits as appropriate.	#
-#									#
-#########################################################################
-
-	global		fsadd
-fsadd:
-	andi.b		&0x30,%d0		# clear rnd prec
-	ori.b		&s_mode*0x10,%d0	# insert sgl prec
-	bra.b		fadd
-
-	global		fdadd
-fdadd:
-	andi.b		&0x30,%d0		# clear rnd prec
-	ori.b		&d_mode*0x10,%d0	# insert dbl prec
-
-	global		fadd
-fadd:
-	mov.l		%d0,L_SCR3(%a6)		# store rnd info
-
-	clr.w		%d1
-	mov.b		DTAG(%a6),%d1
-	lsl.b		&0x3,%d1
-	or.b		STAG(%a6),%d1		# combine src tags
-
-	bne.w		fadd_not_norm		# optimize on non-norm input
-
-#
-# ADD: norms and denorms
-#
-fadd_norm:
-	bsr.l		addsub_scaler2		# scale exponents
-
-fadd_zero_entry:
-	fmovm.x		FP_SCR1(%a6),&0x80	# load dst op
-
-	fmov.l		&0x0,%fpsr		# clear FPSR
-	fmov.l		L_SCR3(%a6),%fpcr	# set FPCR
-
-	fadd.x		FP_SCR0(%a6),%fp0	# execute add
-
-	fmov.l		&0x0,%fpcr		# clear FPCR
-	fmov.l		%fpsr,%d1		# fetch INEX2,N,Z
-
-	or.l		%d1,USER_FPSR(%a6)	# save exc and ccode bits
-
-	fbeq.w		fadd_zero_exit		# if result is zero, end now
-
-	mov.l		%d2,-(%sp)		# save d2
-
-	fmovm.x		&0x01,-(%sp)		# save result to stack
-
-	mov.w		2+L_SCR3(%a6),%d1
-	lsr.b		&0x6,%d1
-
-	mov.w		(%sp),%d2		# fetch new sign, exp
-	andi.l		&0x7fff,%d2		# strip sign
-	sub.l		%d0,%d2			# add scale factor
-
-	cmp.l		%d2,(tbl_fadd_ovfl.b,%pc,%d1.w*4) # is it an overflow?
-	bge.b		fadd_ovfl		# yes
-
-	cmp.l		%d2,(tbl_fadd_unfl.b,%pc,%d1.w*4) # is it an underflow?
-	blt.w		fadd_unfl		# yes
-	beq.w		fadd_may_unfl		# maybe; go find out
-
-fadd_normal:
-	mov.w		(%sp),%d1
-	andi.w		&0x8000,%d1		# keep sign
-	or.w		%d2,%d1			# concat sign,new exp
-	mov.w		%d1,(%sp)		# insert new exponent
-
-	fmovm.x		(%sp)+,&0x80		# return result in fp0
-
-	mov.l		(%sp)+,%d2		# restore d2
-	rts
-
-fadd_zero_exit:
-#	fmov.s		&0x00000000,%fp0	# return zero in fp0
-	rts
-
-tbl_fadd_ovfl:
-	long		0x7fff			# ext ovfl
-	long		0x407f			# sgl ovfl
-	long		0x43ff			# dbl ovfl
-
-tbl_fadd_unfl:
-	long	        0x0000			# ext unfl
-	long		0x3f81			# sgl unfl
-	long		0x3c01			# dbl unfl
-
-fadd_ovfl:
-	or.l		&ovfl_inx_mask,USER_FPSR(%a6) # set ovfl/aovfl/ainex
-
-	mov.b		FPCR_ENABLE(%a6),%d1
-	andi.b		&0x13,%d1		# is OVFL or INEX enabled?
-	bne.b		fadd_ovfl_ena		# yes
-
-	add.l		&0xc,%sp
-fadd_ovfl_dis:
-	btst		&neg_bit,FPSR_CC(%a6)	# is result negative?
-	sne		%d1			# set sign param accordingly
-	mov.l		L_SCR3(%a6),%d0		# pass prec:rnd
-	bsr.l		ovf_res			# calculate default result
-	or.b		%d0,FPSR_CC(%a6)	# set INF,N if applicable
-	fmovm.x		(%a0),&0x80		# return default result in fp0
-	mov.l		(%sp)+,%d2		# restore d2
-	rts
-
-fadd_ovfl_ena:
-	mov.b		L_SCR3(%a6),%d1
-	andi.b		&0xc0,%d1		# is precision extended?
-	bne.b		fadd_ovfl_ena_sd	# no; prec = sgl or dbl
-
-fadd_ovfl_ena_cont:
-	mov.w		(%sp),%d1
-	andi.w		&0x8000,%d1		# keep sign
-	subi.l		&0x6000,%d2		# add extra bias
-	andi.w		&0x7fff,%d2
-	or.w		%d2,%d1			# concat sign,new exp
-	mov.w		%d1,(%sp)		# insert new exponent
-
-	fmovm.x		(%sp)+,&0x40		# return EXOP in fp1
-	bra.b		fadd_ovfl_dis
-
-fadd_ovfl_ena_sd:
-	fmovm.x		FP_SCR1(%a6),&0x80	# load dst op
-
-	mov.l		L_SCR3(%a6),%d1
-	andi.b		&0x30,%d1		# keep rnd mode
-	fmov.l		%d1,%fpcr		# set FPCR
-
-	fadd.x		FP_SCR0(%a6),%fp0	# execute add
-
-	fmov.l		&0x0,%fpcr		# clear FPCR
-
-	add.l		&0xc,%sp
-	fmovm.x		&0x01,-(%sp)
-	bra.b		fadd_ovfl_ena_cont
-
-fadd_unfl:
-	bset		&unfl_bit,FPSR_EXCEPT(%a6) # set unfl exc bit
-
-	add.l		&0xc,%sp
-
-	fmovm.x		FP_SCR1(%a6),&0x80	# load dst op
-
-	fmov.l		&rz_mode*0x10,%fpcr	# set FPCR
-	fmov.l		&0x0,%fpsr		# clear FPSR
-
-	fadd.x		FP_SCR0(%a6),%fp0	# execute add
-
-	fmov.l		&0x0,%fpcr		# clear FPCR
-	fmov.l		%fpsr,%d1		# save status
-
-	or.l		%d1,USER_FPSR(%a6)	# save INEX,N
-
-	mov.b		FPCR_ENABLE(%a6),%d1
-	andi.b		&0x0b,%d1		# is UNFL or INEX enabled?
-	bne.b		fadd_unfl_ena		# yes
-
-fadd_unfl_dis:
-	fmovm.x		&0x80,FP_SCR0(%a6)	# store out result
-
-	lea		FP_SCR0(%a6),%a0	# pass: result addr
-	mov.l		L_SCR3(%a6),%d1		# pass: rnd prec,mode
-	bsr.l		unf_res			# calculate default result
-	or.b		%d0,FPSR_CC(%a6)	# 'Z' bit may have been set
-	fmovm.x		FP_SCR0(%a6),&0x80	# return default result in fp0
-	mov.l		(%sp)+,%d2		# restore d2
-	rts
-
-fadd_unfl_ena:
-	fmovm.x		FP_SCR1(%a6),&0x40	# load dst op
-
-	mov.l		L_SCR3(%a6),%d1
-	andi.b		&0xc0,%d1		# is precision extended?
-	bne.b		fadd_unfl_ena_sd	# no; sgl or dbl
-
-	fmov.l		L_SCR3(%a6),%fpcr	# set FPCR
-
-fadd_unfl_ena_cont:
-	fmov.l		&0x0,%fpsr		# clear FPSR
-
-	fadd.x		FP_SCR0(%a6),%fp1	# execute multiply
-
-	fmov.l		&0x0,%fpcr		# clear FPCR
-
-	fmovm.x		&0x40,FP_SCR0(%a6)	# save result to stack
-	mov.w		FP_SCR0_EX(%a6),%d1	# fetch {sgn,exp}
-	mov.l		%d1,%d2			# make a copy
-	andi.l		&0x7fff,%d1		# strip sign
-	andi.w		&0x8000,%d2		# keep old sign
-	sub.l		%d0,%d1			# add scale factor
-	addi.l		&0x6000,%d1		# add new bias
-	andi.w		&0x7fff,%d1		# clear top bit
-	or.w		%d2,%d1			# concat sign,new exp
-	mov.w		%d1,FP_SCR0_EX(%a6)	# insert new exponent
-	fmovm.x		FP_SCR0(%a6),&0x40	# return EXOP in fp1
-	bra.w		fadd_unfl_dis
-
-fadd_unfl_ena_sd:
-	mov.l		L_SCR3(%a6),%d1
-	andi.b		&0x30,%d1		# use only rnd mode
-	fmov.l		%d1,%fpcr		# set FPCR
-
-	bra.b		fadd_unfl_ena_cont
-
-#
-# result is equal to the smallest normalized number in the selected precision
-# if the precision is extended, this result could not have come from an
-# underflow that rounded up.
-#
-fadd_may_unfl:
-	mov.l		L_SCR3(%a6),%d1
-	andi.b		&0xc0,%d1
-	beq.w		fadd_normal		# yes; no underflow occurred
-
-	mov.l		0x4(%sp),%d1		# extract hi(man)
-	cmpi.l		%d1,&0x80000000		# is hi(man) = 0x80000000?
-	bne.w		fadd_normal		# no; no underflow occurred
-
-	tst.l		0x8(%sp)		# is lo(man) = 0x0?
-	bne.w		fadd_normal		# no; no underflow occurred
-
-	btst		&inex2_bit,FPSR_EXCEPT(%a6) # is INEX2 set?
-	beq.w		fadd_normal		# no; no underflow occurred
-
-#
-# ok, so now the result has a exponent equal to the smallest normalized
-# exponent for the selected precision. also, the mantissa is equal to
-# 0x8000000000000000 and this mantissa is the result of rounding non-zero
-# g,r,s.
-# now, we must determine whether the pre-rounded result was an underflow
-# rounded "up" or a normalized number rounded "down".
-# so, we do this be re-executing the add using RZ as the rounding mode and
-# seeing if the new result is smaller or equal to the current result.
-#
-	fmovm.x		FP_SCR1(%a6),&0x40	# load dst op into fp1
-
-	mov.l		L_SCR3(%a6),%d1
-	andi.b		&0xc0,%d1		# keep rnd prec
-	ori.b		&rz_mode*0x10,%d1	# insert rnd mode
-	fmov.l		%d1,%fpcr		# set FPCR
-	fmov.l		&0x0,%fpsr		# clear FPSR
-
-	fadd.x		FP_SCR0(%a6),%fp1	# execute add
-
-	fmov.l		&0x0,%fpcr		# clear FPCR
-
-	fabs.x		%fp0			# compare absolute values
-	fabs.x		%fp1
-	fcmp.x		%fp0,%fp1		# is first result > second?
-
-	fbgt.w		fadd_unfl		# yes; it's an underflow
-	bra.w		fadd_normal		# no; it's not an underflow
-
-##########################################################################
-
-#
-# Add: inputs are not both normalized; what are they?
-#
-fadd_not_norm:
-	mov.w		(tbl_fadd_op.b,%pc,%d1.w*2),%d1
-	jmp		(tbl_fadd_op.b,%pc,%d1.w*1)
-
-	swbeg		&48
-tbl_fadd_op:
-	short		fadd_norm	- tbl_fadd_op # NORM + NORM
-	short		fadd_zero_src	- tbl_fadd_op # NORM + ZERO
-	short		fadd_inf_src	- tbl_fadd_op # NORM + INF
-	short		fadd_res_qnan	- tbl_fadd_op # NORM + QNAN
-	short		fadd_norm	- tbl_fadd_op # NORM + DENORM
-	short		fadd_res_snan	- tbl_fadd_op # NORM + SNAN
-	short		tbl_fadd_op	- tbl_fadd_op #
-	short		tbl_fadd_op	- tbl_fadd_op #
-
-	short		fadd_zero_dst	- tbl_fadd_op # ZERO + NORM
-	short		fadd_zero_2	- tbl_fadd_op # ZERO + ZERO
-	short		fadd_inf_src	- tbl_fadd_op # ZERO + INF
-	short		fadd_res_qnan	- tbl_fadd_op # NORM + QNAN
-	short		fadd_zero_dst	- tbl_fadd_op # ZERO + DENORM
-	short		fadd_res_snan	- tbl_fadd_op # NORM + SNAN
-	short		tbl_fadd_op	- tbl_fadd_op #
-	short		tbl_fadd_op	- tbl_fadd_op #
-
-	short		fadd_inf_dst	- tbl_fadd_op # INF + NORM
-	short		fadd_inf_dst	- tbl_fadd_op # INF + ZERO
-	short		fadd_inf_2	- tbl_fadd_op # INF + INF
-	short		fadd_res_qnan	- tbl_fadd_op # NORM + QNAN
-	short		fadd_inf_dst	- tbl_fadd_op # INF + DENORM
-	short		fadd_res_snan	- tbl_fadd_op # NORM + SNAN
-	short		tbl_fadd_op	- tbl_fadd_op #
-	short		tbl_fadd_op	- tbl_fadd_op #
-
-	short		fadd_res_qnan	- tbl_fadd_op # QNAN + NORM
-	short		fadd_res_qnan	- tbl_fadd_op # QNAN + ZERO
-	short		fadd_res_qnan	- tbl_fadd_op # QNAN + INF
-	short		fadd_res_qnan	- tbl_fadd_op # QNAN + QNAN
-	short		fadd_res_qnan	- tbl_fadd_op # QNAN + DENORM
-	short		fadd_res_snan	- tbl_fadd_op # QNAN + SNAN
-	short		tbl_fadd_op	- tbl_fadd_op #
-	short		tbl_fadd_op	- tbl_fadd_op #
-
-	short		fadd_norm	- tbl_fadd_op # DENORM + NORM
-	short		fadd_zero_src	- tbl_fadd_op # DENORM + ZERO
-	short		fadd_inf_src	- tbl_fadd_op # DENORM + INF
-	short		fadd_res_qnan	- tbl_fadd_op # NORM + QNAN
-	short		fadd_norm	- tbl_fadd_op # DENORM + DENORM
-	short		fadd_res_snan	- tbl_fadd_op # NORM + SNAN
-	short		tbl_fadd_op	- tbl_fadd_op #
-	short		tbl_fadd_op	- tbl_fadd_op #
-
-	short		fadd_res_snan	- tbl_fadd_op # SNAN + NORM
-	short		fadd_res_snan	- tbl_fadd_op # SNAN + ZERO
-	short		fadd_res_snan	- tbl_fadd_op # SNAN + INF
-	short		fadd_res_snan	- tbl_fadd_op # SNAN + QNAN
-	short		fadd_res_snan	- tbl_fadd_op # SNAN + DENORM
-	short		fadd_res_snan	- tbl_fadd_op # SNAN + SNAN
-	short		tbl_fadd_op	- tbl_fadd_op #
-	short		tbl_fadd_op	- tbl_fadd_op #
-
-fadd_res_qnan:
-	bra.l		res_qnan
-fadd_res_snan:
-	bra.l		res_snan
-
-#
-# both operands are ZEROes
-#
-fadd_zero_2:
-	mov.b		SRC_EX(%a0),%d0		# are the signs opposite
-	mov.b		DST_EX(%a1),%d1
-	eor.b		%d0,%d1
-	bmi.w		fadd_zero_2_chk_rm	# weed out (-ZERO)+(+ZERO)
-
-# the signs are the same. so determine whether they are positive or negative
-# and return the appropriately signed zero.
-	tst.b		%d0			# are ZEROes positive or negative?
-	bmi.b		fadd_zero_rm		# negative
-	fmov.s		&0x00000000,%fp0	# return +ZERO
-	mov.b		&z_bmask,FPSR_CC(%a6)	# set Z
-	rts
-
-#
-# the ZEROes have opposite signs:
-# - Therefore, we return +ZERO if the rounding modes are RN,RZ, or RP.
-# - -ZERO is returned in the case of RM.
-#
-fadd_zero_2_chk_rm:
-	mov.b		3+L_SCR3(%a6),%d1
-	andi.b		&0x30,%d1		# extract rnd mode
-	cmpi.b		%d1,&rm_mode*0x10	# is rnd mode == RM?
-	beq.b		fadd_zero_rm		# yes
-	fmov.s		&0x00000000,%fp0	# return +ZERO
-	mov.b		&z_bmask,FPSR_CC(%a6)	# set Z
-	rts
-
-fadd_zero_rm:
-	fmov.s		&0x80000000,%fp0	# return -ZERO
-	mov.b		&neg_bmask+z_bmask,FPSR_CC(%a6) # set NEG/Z
-	rts
-
-#
-# one operand is a ZERO and the other is a DENORM or NORM. scale
-# the DENORM or NORM and jump to the regular fadd routine.
-#
-fadd_zero_dst:
-	mov.w		SRC_EX(%a0),FP_SCR0_EX(%a6)
-	mov.l		SRC_HI(%a0),FP_SCR0_HI(%a6)
-	mov.l		SRC_LO(%a0),FP_SCR0_LO(%a6)
-	bsr.l		scale_to_zero_src	# scale the operand
-	clr.w		FP_SCR1_EX(%a6)
-	clr.l		FP_SCR1_HI(%a6)
-	clr.l		FP_SCR1_LO(%a6)
-	bra.w		fadd_zero_entry		# go execute fadd
-
-fadd_zero_src:
-	mov.w		DST_EX(%a1),FP_SCR1_EX(%a6)
-	mov.l		DST_HI(%a1),FP_SCR1_HI(%a6)
-	mov.l		DST_LO(%a1),FP_SCR1_LO(%a6)
-	bsr.l		scale_to_zero_dst	# scale the operand
-	clr.w		FP_SCR0_EX(%a6)
-	clr.l		FP_SCR0_HI(%a6)
-	clr.l		FP_SCR0_LO(%a6)
-	bra.w		fadd_zero_entry		# go execute fadd
-
-#
-# both operands are INFs. an OPERR will result if the INFs have
-# different signs. else, an INF of the same sign is returned
-#
-fadd_inf_2:
-	mov.b		SRC_EX(%a0),%d0		# exclusive or the signs
-	mov.b		DST_EX(%a1),%d1
-	eor.b		%d1,%d0
-	bmi.l		res_operr		# weed out (-INF)+(+INF)
-
-# ok, so it's not an OPERR. but, we do have to remember to return the
-# src INF since that's where the 881/882 gets the j-bit from...
-
-#
-# operands are INF and one of {ZERO, INF, DENORM, NORM}
-#
-fadd_inf_src:
-	fmovm.x		SRC(%a0),&0x80		# return src INF
-	tst.b		SRC_EX(%a0)		# is INF positive?
-	bpl.b		fadd_inf_done		# yes; we're done
-	mov.b		&neg_bmask+inf_bmask,FPSR_CC(%a6) # set INF/NEG
-	rts
-
-#
-# operands are INF and one of {ZERO, INF, DENORM, NORM}
-#
-fadd_inf_dst:
-	fmovm.x		DST(%a1),&0x80		# return dst INF
-	tst.b		DST_EX(%a1)		# is INF positive?
-	bpl.b		fadd_inf_done		# yes; we're done
-	mov.b		&neg_bmask+inf_bmask,FPSR_CC(%a6) # set INF/NEG
-	rts
-
-fadd_inf_done:
-	mov.b		&inf_bmask,FPSR_CC(%a6) # set INF
-	rts
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	fsub(): emulates the fsub instruction				#
-#	fssub(): emulates the fssub instruction				#
-#	fdsub(): emulates the fdsub instruction				#
-#									#
-# XREF ****************************************************************	#
-#	addsub_scaler2() - scale the operands so they won't take exc	#
-#	ovf_res() - return default overflow result			#
-#	unf_res() - return default underflow result			#
-#	res_qnan() - set QNAN result					#
-#	res_snan() - set SNAN result					#
-#	res_operr() - set OPERR result					#
-#	scale_to_zero_src() - set src operand exponent equal to zero	#
-#	scale_to_zero_dst() - set dst operand exponent equal to zero	#
-#									#
-# INPUT ***************************************************************	#
-#	a0 = pointer to extended precision source operand		#
-#	a1 = pointer to extended precision destination operand		#
-#									#
-# OUTPUT **************************************************************	#
-#	fp0 = result							#
-#	fp1 = EXOP (if exception occurred)				#
-#									#
-# ALGORITHM ***********************************************************	#
-#	Handle NANs, infinities, and zeroes as special cases. Divide	#
-# norms into extended, single, and double precision.			#
-#	Do subtraction after scaling exponents such that exception won't#
-# occur. Then, check result exponent to see if exception would have	#
-# occurred. If so, return default result and maybe EXOP. Else, insert	#
-# the correct result exponent and return. Set FPSR bits as appropriate.	#
-#									#
-#########################################################################
-
-	global		fssub
-fssub:
-	andi.b		&0x30,%d0		# clear rnd prec
-	ori.b		&s_mode*0x10,%d0	# insert sgl prec
-	bra.b		fsub
-
-	global		fdsub
-fdsub:
-	andi.b		&0x30,%d0		# clear rnd prec
-	ori.b		&d_mode*0x10,%d0	# insert dbl prec
-
-	global		fsub
-fsub:
-	mov.l		%d0,L_SCR3(%a6)		# store rnd info
-
-	clr.w		%d1
-	mov.b		DTAG(%a6),%d1
-	lsl.b		&0x3,%d1
-	or.b		STAG(%a6),%d1		# combine src tags
-
-	bne.w		fsub_not_norm		# optimize on non-norm input
-
-#
-# SUB: norms and denorms
-#
-fsub_norm:
-	bsr.l		addsub_scaler2		# scale exponents
-
-fsub_zero_entry:
-	fmovm.x		FP_SCR1(%a6),&0x80	# load dst op
-
-	fmov.l		&0x0,%fpsr		# clear FPSR
-	fmov.l		L_SCR3(%a6),%fpcr	# set FPCR
-
-	fsub.x		FP_SCR0(%a6),%fp0	# execute subtract
-
-	fmov.l		&0x0,%fpcr		# clear FPCR
-	fmov.l		%fpsr,%d1		# fetch INEX2, N, Z
-
-	or.l		%d1,USER_FPSR(%a6)	# save exc and ccode bits
-
-	fbeq.w		fsub_zero_exit		# if result zero, end now
-
-	mov.l		%d2,-(%sp)		# save d2
-
-	fmovm.x		&0x01,-(%sp)		# save result to stack
-
-	mov.w		2+L_SCR3(%a6),%d1
-	lsr.b		&0x6,%d1
-
-	mov.w		(%sp),%d2		# fetch new exponent
-	andi.l		&0x7fff,%d2		# strip sign
-	sub.l		%d0,%d2			# add scale factor
-
-	cmp.l		%d2,(tbl_fsub_ovfl.b,%pc,%d1.w*4) # is it an overflow?
-	bge.b		fsub_ovfl		# yes
-
-	cmp.l		%d2,(tbl_fsub_unfl.b,%pc,%d1.w*4) # is it an underflow?
-	blt.w		fsub_unfl		# yes
-	beq.w		fsub_may_unfl		# maybe; go find out
-
-fsub_normal:
-	mov.w		(%sp),%d1
-	andi.w		&0x8000,%d1		# keep sign
-	or.w		%d2,%d1			# insert new exponent
-	mov.w		%d1,(%sp)		# insert new exponent
-
-	fmovm.x		(%sp)+,&0x80		# return result in fp0
-
-	mov.l		(%sp)+,%d2		# restore d2
-	rts
-
-fsub_zero_exit:
-#	fmov.s		&0x00000000,%fp0	# return zero in fp0
-	rts
-
-tbl_fsub_ovfl:
-	long		0x7fff			# ext ovfl
-	long		0x407f			# sgl ovfl
-	long		0x43ff			# dbl ovfl
-
-tbl_fsub_unfl:
-	long	        0x0000			# ext unfl
-	long		0x3f81			# sgl unfl
-	long		0x3c01			# dbl unfl
-
-fsub_ovfl:
-	or.l		&ovfl_inx_mask,USER_FPSR(%a6) # set ovfl/aovfl/ainex
-
-	mov.b		FPCR_ENABLE(%a6),%d1
-	andi.b		&0x13,%d1		# is OVFL or INEX enabled?
-	bne.b		fsub_ovfl_ena		# yes
-
-	add.l		&0xc,%sp
-fsub_ovfl_dis:
-	btst		&neg_bit,FPSR_CC(%a6)	# is result negative?
-	sne		%d1			# set sign param accordingly
-	mov.l		L_SCR3(%a6),%d0		# pass prec:rnd
-	bsr.l		ovf_res			# calculate default result
-	or.b		%d0,FPSR_CC(%a6)	# set INF,N if applicable
-	fmovm.x		(%a0),&0x80		# return default result in fp0
-	mov.l		(%sp)+,%d2		# restore d2
-	rts
-
-fsub_ovfl_ena:
-	mov.b		L_SCR3(%a6),%d1
-	andi.b		&0xc0,%d1		# is precision extended?
-	bne.b		fsub_ovfl_ena_sd	# no
-
-fsub_ovfl_ena_cont:
-	mov.w		(%sp),%d1		# fetch {sgn,exp}
-	andi.w		&0x8000,%d1		# keep sign
-	subi.l		&0x6000,%d2		# subtract new bias
-	andi.w		&0x7fff,%d2		# clear top bit
-	or.w		%d2,%d1			# concat sign,exp
-	mov.w		%d1,(%sp)		# insert new exponent
-
-	fmovm.x		(%sp)+,&0x40		# return EXOP in fp1
-	bra.b		fsub_ovfl_dis
-
-fsub_ovfl_ena_sd:
-	fmovm.x		FP_SCR1(%a6),&0x80	# load dst op
-
-	mov.l		L_SCR3(%a6),%d1
-	andi.b		&0x30,%d1		# clear rnd prec
-	fmov.l		%d1,%fpcr		# set FPCR
-
-	fsub.x		FP_SCR0(%a6),%fp0	# execute subtract
-
-	fmov.l		&0x0,%fpcr		# clear FPCR
-
-	add.l		&0xc,%sp
-	fmovm.x		&0x01,-(%sp)
-	bra.b		fsub_ovfl_ena_cont
-
-fsub_unfl:
-	bset		&unfl_bit,FPSR_EXCEPT(%a6) # set unfl exc bit
-
-	add.l		&0xc,%sp
-
-	fmovm.x		FP_SCR1(%a6),&0x80	# load dst op
-
-	fmov.l		&rz_mode*0x10,%fpcr	# set FPCR
-	fmov.l		&0x0,%fpsr		# clear FPSR
-
-	fsub.x		FP_SCR0(%a6),%fp0	# execute subtract
-
-	fmov.l		&0x0,%fpcr		# clear FPCR
-	fmov.l		%fpsr,%d1		# save status
-
-	or.l		%d1,USER_FPSR(%a6)
-
-	mov.b		FPCR_ENABLE(%a6),%d1
-	andi.b		&0x0b,%d1		# is UNFL or INEX enabled?
-	bne.b		fsub_unfl_ena		# yes
-
-fsub_unfl_dis:
-	fmovm.x		&0x80,FP_SCR0(%a6)	# store out result
-
-	lea		FP_SCR0(%a6),%a0	# pass: result addr
-	mov.l		L_SCR3(%a6),%d1		# pass: rnd prec,mode
-	bsr.l		unf_res			# calculate default result
-	or.b		%d0,FPSR_CC(%a6)	# 'Z' may have been set
-	fmovm.x		FP_SCR0(%a6),&0x80	# return default result in fp0
-	mov.l		(%sp)+,%d2		# restore d2
-	rts
-
-fsub_unfl_ena:
-	fmovm.x		FP_SCR1(%a6),&0x40
-
-	mov.l		L_SCR3(%a6),%d1
-	andi.b		&0xc0,%d1		# is precision extended?
-	bne.b		fsub_unfl_ena_sd	# no
-
-	fmov.l		L_SCR3(%a6),%fpcr	# set FPCR
-
-fsub_unfl_ena_cont:
-	fmov.l		&0x0,%fpsr		# clear FPSR
-
-	fsub.x		FP_SCR0(%a6),%fp1	# execute subtract
-
-	fmov.l		&0x0,%fpcr		# clear FPCR
-
-	fmovm.x		&0x40,FP_SCR0(%a6)	# store result to stack
-	mov.w		FP_SCR0_EX(%a6),%d1	# fetch {sgn,exp}
-	mov.l		%d1,%d2			# make a copy
-	andi.l		&0x7fff,%d1		# strip sign
-	andi.w		&0x8000,%d2		# keep old sign
-	sub.l		%d0,%d1			# add scale factor
-	addi.l		&0x6000,%d1		# subtract new bias
-	andi.w		&0x7fff,%d1		# clear top bit
-	or.w		%d2,%d1			# concat sgn,exp
-	mov.w		%d1,FP_SCR0_EX(%a6)	# insert new exponent
-	fmovm.x		FP_SCR0(%a6),&0x40	# return EXOP in fp1
-	bra.w		fsub_unfl_dis
-
-fsub_unfl_ena_sd:
-	mov.l		L_SCR3(%a6),%d1
-	andi.b		&0x30,%d1		# clear rnd prec
-	fmov.l		%d1,%fpcr		# set FPCR
-
-	bra.b		fsub_unfl_ena_cont
-
-#
-# result is equal to the smallest normalized number in the selected precision
-# if the precision is extended, this result could not have come from an
-# underflow that rounded up.
-#
-fsub_may_unfl:
-	mov.l		L_SCR3(%a6),%d1
-	andi.b		&0xc0,%d1		# fetch rnd prec
-	beq.w		fsub_normal		# yes; no underflow occurred
-
-	mov.l		0x4(%sp),%d1
-	cmpi.l		%d1,&0x80000000		# is hi(man) = 0x80000000?
-	bne.w		fsub_normal		# no; no underflow occurred
-
-	tst.l		0x8(%sp)		# is lo(man) = 0x0?
-	bne.w		fsub_normal		# no; no underflow occurred
-
-	btst		&inex2_bit,FPSR_EXCEPT(%a6) # is INEX2 set?
-	beq.w		fsub_normal		# no; no underflow occurred
-
-#
-# ok, so now the result has a exponent equal to the smallest normalized
-# exponent for the selected precision. also, the mantissa is equal to
-# 0x8000000000000000 and this mantissa is the result of rounding non-zero
-# g,r,s.
-# now, we must determine whether the pre-rounded result was an underflow
-# rounded "up" or a normalized number rounded "down".
-# so, we do this be re-executing the add using RZ as the rounding mode and
-# seeing if the new result is smaller or equal to the current result.
-#
-	fmovm.x		FP_SCR1(%a6),&0x40	# load dst op into fp1
-
-	mov.l		L_SCR3(%a6),%d1
-	andi.b		&0xc0,%d1		# keep rnd prec
-	ori.b		&rz_mode*0x10,%d1	# insert rnd mode
-	fmov.l		%d1,%fpcr		# set FPCR
-	fmov.l		&0x0,%fpsr		# clear FPSR
-
-	fsub.x		FP_SCR0(%a6),%fp1	# execute subtract
-
-	fmov.l		&0x0,%fpcr		# clear FPCR
-
-	fabs.x		%fp0			# compare absolute values
-	fabs.x		%fp1
-	fcmp.x		%fp0,%fp1		# is first result > second?
-
-	fbgt.w		fsub_unfl		# yes; it's an underflow
-	bra.w		fsub_normal		# no; it's not an underflow
-
-##########################################################################
-
-#
-# Sub: inputs are not both normalized; what are they?
-#
-fsub_not_norm:
-	mov.w		(tbl_fsub_op.b,%pc,%d1.w*2),%d1
-	jmp		(tbl_fsub_op.b,%pc,%d1.w*1)
-
-	swbeg		&48
-tbl_fsub_op:
-	short		fsub_norm	- tbl_fsub_op # NORM - NORM
-	short		fsub_zero_src	- tbl_fsub_op # NORM - ZERO
-	short		fsub_inf_src	- tbl_fsub_op # NORM - INF
-	short		fsub_res_qnan	- tbl_fsub_op # NORM - QNAN
-	short		fsub_norm	- tbl_fsub_op # NORM - DENORM
-	short		fsub_res_snan	- tbl_fsub_op # NORM - SNAN
-	short		tbl_fsub_op	- tbl_fsub_op #
-	short		tbl_fsub_op	- tbl_fsub_op #
-
-	short		fsub_zero_dst	- tbl_fsub_op # ZERO - NORM
-	short		fsub_zero_2	- tbl_fsub_op # ZERO - ZERO
-	short		fsub_inf_src	- tbl_fsub_op # ZERO - INF
-	short		fsub_res_qnan	- tbl_fsub_op # NORM - QNAN
-	short		fsub_zero_dst	- tbl_fsub_op # ZERO - DENORM
-	short		fsub_res_snan	- tbl_fsub_op # NORM - SNAN
-	short		tbl_fsub_op	- tbl_fsub_op #
-	short		tbl_fsub_op	- tbl_fsub_op #
-
-	short		fsub_inf_dst	- tbl_fsub_op # INF - NORM
-	short		fsub_inf_dst	- tbl_fsub_op # INF - ZERO
-	short		fsub_inf_2	- tbl_fsub_op # INF - INF
-	short		fsub_res_qnan	- tbl_fsub_op # NORM - QNAN
-	short		fsub_inf_dst	- tbl_fsub_op # INF - DENORM
-	short		fsub_res_snan	- tbl_fsub_op # NORM - SNAN
-	short		tbl_fsub_op	- tbl_fsub_op #
-	short		tbl_fsub_op	- tbl_fsub_op #
-
-	short		fsub_res_qnan	- tbl_fsub_op # QNAN - NORM
-	short		fsub_res_qnan	- tbl_fsub_op # QNAN - ZERO
-	short		fsub_res_qnan	- tbl_fsub_op # QNAN - INF
-	short		fsub_res_qnan	- tbl_fsub_op # QNAN - QNAN
-	short		fsub_res_qnan	- tbl_fsub_op # QNAN - DENORM
-	short		fsub_res_snan	- tbl_fsub_op # QNAN - SNAN
-	short		tbl_fsub_op	- tbl_fsub_op #
-	short		tbl_fsub_op	- tbl_fsub_op #
-
-	short		fsub_norm	- tbl_fsub_op # DENORM - NORM
-	short		fsub_zero_src	- tbl_fsub_op # DENORM - ZERO
-	short		fsub_inf_src	- tbl_fsub_op # DENORM - INF
-	short		fsub_res_qnan	- tbl_fsub_op # NORM - QNAN
-	short		fsub_norm	- tbl_fsub_op # DENORM - DENORM
-	short		fsub_res_snan	- tbl_fsub_op # NORM - SNAN
-	short		tbl_fsub_op	- tbl_fsub_op #
-	short		tbl_fsub_op	- tbl_fsub_op #
-
-	short		fsub_res_snan	- tbl_fsub_op # SNAN - NORM
-	short		fsub_res_snan	- tbl_fsub_op # SNAN - ZERO
-	short		fsub_res_snan	- tbl_fsub_op # SNAN - INF
-	short		fsub_res_snan	- tbl_fsub_op # SNAN - QNAN
-	short		fsub_res_snan	- tbl_fsub_op # SNAN - DENORM
-	short		fsub_res_snan	- tbl_fsub_op # SNAN - SNAN
-	short		tbl_fsub_op	- tbl_fsub_op #
-	short		tbl_fsub_op	- tbl_fsub_op #
-
-fsub_res_qnan:
-	bra.l		res_qnan
-fsub_res_snan:
-	bra.l		res_snan
-
-#
-# both operands are ZEROes
-#
-fsub_zero_2:
-	mov.b		SRC_EX(%a0),%d0
-	mov.b		DST_EX(%a1),%d1
-	eor.b		%d1,%d0
-	bpl.b		fsub_zero_2_chk_rm
-
-# the signs are opposite, so, return a ZERO w/ the sign of the dst ZERO
-	tst.b		%d0			# is dst negative?
-	bmi.b		fsub_zero_2_rm		# yes
-	fmov.s		&0x00000000,%fp0	# no; return +ZERO
-	mov.b		&z_bmask,FPSR_CC(%a6)	# set Z
-	rts
-
-#
-# the ZEROes have the same signs:
-# - Therefore, we return +ZERO if the rounding mode is RN,RZ, or RP
-# - -ZERO is returned in the case of RM.
-#
-fsub_zero_2_chk_rm:
-	mov.b		3+L_SCR3(%a6),%d1
-	andi.b		&0x30,%d1		# extract rnd mode
-	cmpi.b		%d1,&rm_mode*0x10	# is rnd mode = RM?
-	beq.b		fsub_zero_2_rm		# yes
-	fmov.s		&0x00000000,%fp0	# no; return +ZERO
-	mov.b		&z_bmask,FPSR_CC(%a6)	# set Z
-	rts
-
-fsub_zero_2_rm:
-	fmov.s		&0x80000000,%fp0	# return -ZERO
-	mov.b		&z_bmask+neg_bmask,FPSR_CC(%a6)	# set Z/NEG
-	rts
-
-#
-# one operand is a ZERO and the other is a DENORM or a NORM.
-# scale the DENORM or NORM and jump to the regular fsub routine.
-#
-fsub_zero_dst:
-	mov.w		SRC_EX(%a0),FP_SCR0_EX(%a6)
-	mov.l		SRC_HI(%a0),FP_SCR0_HI(%a6)
-	mov.l		SRC_LO(%a0),FP_SCR0_LO(%a6)
-	bsr.l		scale_to_zero_src	# scale the operand
-	clr.w		FP_SCR1_EX(%a6)
-	clr.l		FP_SCR1_HI(%a6)
-	clr.l		FP_SCR1_LO(%a6)
-	bra.w		fsub_zero_entry		# go execute fsub
-
-fsub_zero_src:
-	mov.w		DST_EX(%a1),FP_SCR1_EX(%a6)
-	mov.l		DST_HI(%a1),FP_SCR1_HI(%a6)
-	mov.l		DST_LO(%a1),FP_SCR1_LO(%a6)
-	bsr.l		scale_to_zero_dst	# scale the operand
-	clr.w		FP_SCR0_EX(%a6)
-	clr.l		FP_SCR0_HI(%a6)
-	clr.l		FP_SCR0_LO(%a6)
-	bra.w		fsub_zero_entry		# go execute fsub
-
-#
-# both operands are INFs. an OPERR will result if the INFs have the
-# same signs. else,
-#
-fsub_inf_2:
-	mov.b		SRC_EX(%a0),%d0		# exclusive or the signs
-	mov.b		DST_EX(%a1),%d1
-	eor.b		%d1,%d0
-	bpl.l		res_operr		# weed out (-INF)+(+INF)
-
-# ok, so it's not an OPERR. but we do have to remember to return
-# the src INF since that's where the 881/882 gets the j-bit.
-
-fsub_inf_src:
-	fmovm.x		SRC(%a0),&0x80		# return src INF
-	fneg.x		%fp0			# invert sign
-	fbge.w		fsub_inf_done		# sign is now positive
-	mov.b		&neg_bmask+inf_bmask,FPSR_CC(%a6) # set INF/NEG
-	rts
-
-fsub_inf_dst:
-	fmovm.x		DST(%a1),&0x80		# return dst INF
-	tst.b		DST_EX(%a1)		# is INF negative?
-	bpl.b		fsub_inf_done		# no
-	mov.b		&neg_bmask+inf_bmask,FPSR_CC(%a6) # set INF/NEG
-	rts
-
-fsub_inf_done:
-	mov.b		&inf_bmask,FPSR_CC(%a6)	# set INF
-	rts
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	fsqrt(): emulates the fsqrt instruction				#
-#	fssqrt(): emulates the fssqrt instruction			#
-#	fdsqrt(): emulates the fdsqrt instruction			#
-#									#
-# XREF ****************************************************************	#
-#	scale_sqrt() - scale the source operand				#
-#	unf_res() - return default underflow result			#
-#	ovf_res() - return default overflow result			#
-#	res_qnan_1op() - return QNAN result				#
-#	res_snan_1op() - return SNAN result				#
-#									#
-# INPUT ***************************************************************	#
-#	a0 = pointer to extended precision source operand		#
-#	d0  rnd prec,mode						#
-#									#
-# OUTPUT **************************************************************	#
-#	fp0 = result							#
-#	fp1 = EXOP (if exception occurred)				#
-#									#
-# ALGORITHM ***********************************************************	#
-#	Handle NANs, infinities, and zeroes as special cases. Divide	#
-# norms/denorms into ext/sgl/dbl precision.				#
-#	For norms/denorms, scale the exponents such that a sqrt		#
-# instruction won't cause an exception. Use the regular fsqrt to	#
-# compute a result. Check if the regular operands would have taken	#
-# an exception. If so, return the default overflow/underflow result	#
-# and return the EXOP if exceptions are enabled. Else, scale the	#
-# result operand to the proper exponent.				#
-#									#
-#########################################################################
-
-	global		fssqrt
-fssqrt:
-	andi.b		&0x30,%d0		# clear rnd prec
-	ori.b		&s_mode*0x10,%d0	# insert sgl precision
-	bra.b		fsqrt
-
-	global		fdsqrt
-fdsqrt:
-	andi.b		&0x30,%d0		# clear rnd prec
-	ori.b		&d_mode*0x10,%d0	# insert dbl precision
-
-	global		fsqrt
-fsqrt:
-	mov.l		%d0,L_SCR3(%a6)		# store rnd info
-	clr.w		%d1
-	mov.b		STAG(%a6),%d1
-	bne.w		fsqrt_not_norm		# optimize on non-norm input
-
-#
-# SQUARE ROOT: norms and denorms ONLY!
-#
-fsqrt_norm:
-	tst.b		SRC_EX(%a0)		# is operand negative?
-	bmi.l		res_operr		# yes
-
-	andi.b		&0xc0,%d0		# is precision extended?
-	bne.b		fsqrt_not_ext		# no; go handle sgl or dbl
-
-	fmov.l		L_SCR3(%a6),%fpcr	# set FPCR
-	fmov.l		&0x0,%fpsr		# clear FPSR
-
-	fsqrt.x		(%a0),%fp0		# execute square root
-
-	fmov.l		%fpsr,%d1
-	or.l		%d1,USER_FPSR(%a6)	# set N,INEX
-
-	rts
-
-fsqrt_denorm:
-	tst.b		SRC_EX(%a0)		# is operand negative?
-	bmi.l		res_operr		# yes
-
-	andi.b		&0xc0,%d0		# is precision extended?
-	bne.b		fsqrt_not_ext		# no; go handle sgl or dbl
-
-	mov.w		SRC_EX(%a0),FP_SCR0_EX(%a6)
-	mov.l		SRC_HI(%a0),FP_SCR0_HI(%a6)
-	mov.l		SRC_LO(%a0),FP_SCR0_LO(%a6)
-
-	bsr.l		scale_sqrt		# calculate scale factor
-
-	bra.w		fsqrt_sd_normal
-
-#
-# operand is either single or double
-#
-fsqrt_not_ext:
-	cmpi.b		%d0,&s_mode*0x10	# separate sgl/dbl prec
-	bne.w		fsqrt_dbl
-
-#
-# operand is to be rounded to single precision
-#
-fsqrt_sgl:
-	mov.w		SRC_EX(%a0),FP_SCR0_EX(%a6)
-	mov.l		SRC_HI(%a0),FP_SCR0_HI(%a6)
-	mov.l		SRC_LO(%a0),FP_SCR0_LO(%a6)
-
-	bsr.l		scale_sqrt		# calculate scale factor
-
-	cmpi.l		%d0,&0x3fff-0x3f81	# will move in underflow?
-	beq.w		fsqrt_sd_may_unfl
-	bgt.w		fsqrt_sd_unfl		# yes; go handle underflow
-	cmpi.l		%d0,&0x3fff-0x407f	# will move in overflow?
-	beq.w		fsqrt_sd_may_ovfl	# maybe; go check
-	blt.w		fsqrt_sd_ovfl		# yes; go handle overflow
-
-#
-# operand will NOT overflow or underflow when moved in to the fp reg file
-#
-fsqrt_sd_normal:
-	fmov.l		&0x0,%fpsr		# clear FPSR
-	fmov.l		L_SCR3(%a6),%fpcr	# set FPCR
-
-	fsqrt.x		FP_SCR0(%a6),%fp0	# perform absolute
-
-	fmov.l		%fpsr,%d1		# save FPSR
-	fmov.l		&0x0,%fpcr		# clear FPCR
-
-	or.l		%d1,USER_FPSR(%a6)	# save INEX2,N
-
-fsqrt_sd_normal_exit:
-	mov.l		%d2,-(%sp)		# save d2
-	fmovm.x		&0x80,FP_SCR0(%a6)	# store out result
-	mov.w		FP_SCR0_EX(%a6),%d1	# load sgn,exp
-	mov.l		%d1,%d2			# make a copy
-	andi.l		&0x7fff,%d1		# strip sign
-	sub.l		%d0,%d1			# add scale factor
-	andi.w		&0x8000,%d2		# keep old sign
-	or.w		%d1,%d2			# concat old sign,new exp
-	mov.w		%d2,FP_SCR0_EX(%a6)	# insert new exponent
-	mov.l		(%sp)+,%d2		# restore d2
-	fmovm.x		FP_SCR0(%a6),&0x80	# return result in fp0
-	rts
-
-#
-# operand is to be rounded to double precision
-#
-fsqrt_dbl:
-	mov.w		SRC_EX(%a0),FP_SCR0_EX(%a6)
-	mov.l		SRC_HI(%a0),FP_SCR0_HI(%a6)
-	mov.l		SRC_LO(%a0),FP_SCR0_LO(%a6)
-
-	bsr.l		scale_sqrt		# calculate scale factor
-
-	cmpi.l		%d0,&0x3fff-0x3c01	# will move in underflow?
-	beq.w		fsqrt_sd_may_unfl
-	bgt.b		fsqrt_sd_unfl		# yes; go handle underflow
-	cmpi.l		%d0,&0x3fff-0x43ff	# will move in overflow?
-	beq.w		fsqrt_sd_may_ovfl	# maybe; go check
-	blt.w		fsqrt_sd_ovfl		# yes; go handle overflow
-	bra.w		fsqrt_sd_normal		# no; ho handle normalized op
-
-# we're on the line here and the distinguising characteristic is whether
-# the exponent is 3fff or 3ffe. if it's 3ffe, then it's a safe number
-# elsewise fall through to underflow.
-fsqrt_sd_may_unfl:
-	btst		&0x0,1+FP_SCR0_EX(%a6)	# is exponent 0x3fff?
-	bne.w		fsqrt_sd_normal		# yes, so no underflow
-
-#
-# operand WILL underflow when moved in to the fp register file
-#
-fsqrt_sd_unfl:
-	bset		&unfl_bit,FPSR_EXCEPT(%a6) # set unfl exc bit
-
-	fmov.l		&rz_mode*0x10,%fpcr	# set FPCR
-	fmov.l		&0x0,%fpsr		# clear FPSR
-
-	fsqrt.x		FP_SCR0(%a6),%fp0	# execute square root
-
-	fmov.l		%fpsr,%d1		# save status
-	fmov.l		&0x0,%fpcr		# clear FPCR
-
-	or.l		%d1,USER_FPSR(%a6)	# save INEX2,N
-
-# if underflow or inexact is enabled, go calculate EXOP first.
-	mov.b		FPCR_ENABLE(%a6),%d1
-	andi.b		&0x0b,%d1		# is UNFL or INEX enabled?
-	bne.b		fsqrt_sd_unfl_ena	# yes
-
-fsqrt_sd_unfl_dis:
-	fmovm.x		&0x80,FP_SCR0(%a6)	# store out result
-
-	lea		FP_SCR0(%a6),%a0	# pass: result addr
-	mov.l		L_SCR3(%a6),%d1		# pass: rnd prec,mode
-	bsr.l		unf_res			# calculate default result
-	or.b		%d0,FPSR_CC(%a6)	# set possible 'Z' ccode
-	fmovm.x		FP_SCR0(%a6),&0x80	# return default result in fp0
-	rts
-
-#
-# operand will underflow AND underflow is enabled.
-# Therefore, we must return the result rounded to extended precision.
-#
-fsqrt_sd_unfl_ena:
-	mov.l		FP_SCR0_HI(%a6),FP_SCR1_HI(%a6)
-	mov.l		FP_SCR0_LO(%a6),FP_SCR1_LO(%a6)
-	mov.w		FP_SCR0_EX(%a6),%d1	# load current exponent
-
-	mov.l		%d2,-(%sp)		# save d2
-	mov.l		%d1,%d2			# make a copy
-	andi.l		&0x7fff,%d1		# strip sign
-	andi.w		&0x8000,%d2		# keep old sign
-	sub.l		%d0,%d1			# subtract scale factor
-	addi.l		&0x6000,%d1		# add new bias
-	andi.w		&0x7fff,%d1
-	or.w		%d2,%d1			# concat new sign,new exp
-	mov.w		%d1,FP_SCR1_EX(%a6)	# insert new exp
-	fmovm.x		FP_SCR1(%a6),&0x40	# return EXOP in fp1
-	mov.l		(%sp)+,%d2		# restore d2
-	bra.b		fsqrt_sd_unfl_dis
-
-#
-# operand WILL overflow.
-#
-fsqrt_sd_ovfl:
-	fmov.l		&0x0,%fpsr		# clear FPSR
-	fmov.l		L_SCR3(%a6),%fpcr	# set FPCR
-
-	fsqrt.x		FP_SCR0(%a6),%fp0	# perform square root
-
-	fmov.l		&0x0,%fpcr		# clear FPCR
-	fmov.l		%fpsr,%d1		# save FPSR
-
-	or.l		%d1,USER_FPSR(%a6)	# save INEX2,N
-
-fsqrt_sd_ovfl_tst:
-	or.l		&ovfl_inx_mask,USER_FPSR(%a6) # set ovfl/aovfl/ainex
-
-	mov.b		FPCR_ENABLE(%a6),%d1
-	andi.b		&0x13,%d1		# is OVFL or INEX enabled?
-	bne.b		fsqrt_sd_ovfl_ena	# yes
-
-#
-# OVFL is not enabled; therefore, we must create the default result by
-# calling ovf_res().
-#
-fsqrt_sd_ovfl_dis:
-	btst		&neg_bit,FPSR_CC(%a6)	# is result negative?
-	sne		%d1			# set sign param accordingly
-	mov.l		L_SCR3(%a6),%d0		# pass: prec,mode
-	bsr.l		ovf_res			# calculate default result
-	or.b		%d0,FPSR_CC(%a6)	# set INF,N if applicable
-	fmovm.x		(%a0),&0x80		# return default result in fp0
-	rts
-
-#
-# OVFL is enabled.
-# the INEX2 bit has already been updated by the round to the correct precision.
-# now, round to extended(and don't alter the FPSR).
-#
-fsqrt_sd_ovfl_ena:
-	mov.l		%d2,-(%sp)		# save d2
-	mov.w		FP_SCR0_EX(%a6),%d1	# fetch {sgn,exp}
-	mov.l		%d1,%d2			# make a copy
-	andi.l		&0x7fff,%d1		# strip sign
-	andi.w		&0x8000,%d2		# keep old sign
-	sub.l		%d0,%d1			# add scale factor
-	subi.l		&0x6000,%d1		# subtract bias
-	andi.w		&0x7fff,%d1
-	or.w		%d2,%d1			# concat sign,exp
-	mov.w		%d1,FP_SCR0_EX(%a6)	# insert new exponent
-	fmovm.x		FP_SCR0(%a6),&0x40	# return EXOP in fp1
-	mov.l		(%sp)+,%d2		# restore d2
-	bra.b		fsqrt_sd_ovfl_dis
-
-#
-# the move in MAY underflow. so...
-#
-fsqrt_sd_may_ovfl:
-	btst		&0x0,1+FP_SCR0_EX(%a6)	# is exponent 0x3fff?
-	bne.w		fsqrt_sd_ovfl		# yes, so overflow
-
-	fmov.l		&0x0,%fpsr		# clear FPSR
-	fmov.l		L_SCR3(%a6),%fpcr	# set FPCR
-
-	fsqrt.x		FP_SCR0(%a6),%fp0	# perform absolute
-
-	fmov.l		%fpsr,%d1		# save status
-	fmov.l		&0x0,%fpcr		# clear FPCR
-
-	or.l		%d1,USER_FPSR(%a6)	# save INEX2,N
-
-	fmov.x		%fp0,%fp1		# make a copy of result
-	fcmp.b		%fp1,&0x1		# is |result| >= 1.b?
-	fbge.w		fsqrt_sd_ovfl_tst	# yes; overflow has occurred
-
-# no, it didn't overflow; we have correct result
-	bra.w		fsqrt_sd_normal_exit
-
-##########################################################################
-
-#
-# input is not normalized; what is it?
-#
-fsqrt_not_norm:
-	cmpi.b		%d1,&DENORM		# weed out DENORM
-	beq.w		fsqrt_denorm
-	cmpi.b		%d1,&ZERO		# weed out ZERO
-	beq.b		fsqrt_zero
-	cmpi.b		%d1,&INF		# weed out INF
-	beq.b		fsqrt_inf
-	cmpi.b		%d1,&SNAN		# weed out SNAN
-	beq.l		res_snan_1op
-	bra.l		res_qnan_1op
-
-#
-#	fsqrt(+0) = +0
-#	fsqrt(-0) = -0
-#	fsqrt(+INF) = +INF
-#	fsqrt(-INF) = OPERR
-#
-fsqrt_zero:
-	tst.b		SRC_EX(%a0)		# is ZERO positive or negative?
-	bmi.b		fsqrt_zero_m		# negative
-fsqrt_zero_p:
-	fmov.s		&0x00000000,%fp0	# return +ZERO
-	mov.b		&z_bmask,FPSR_CC(%a6)	# set 'Z' ccode bit
-	rts
-fsqrt_zero_m:
-	fmov.s		&0x80000000,%fp0	# return -ZERO
-	mov.b		&z_bmask+neg_bmask,FPSR_CC(%a6)	# set 'Z','N' ccode bits
-	rts
-
-fsqrt_inf:
-	tst.b		SRC_EX(%a0)		# is INF positive or negative?
-	bmi.l		res_operr		# negative
-fsqrt_inf_p:
-	fmovm.x		SRC(%a0),&0x80		# return +INF in fp0
-	mov.b		&inf_bmask,FPSR_CC(%a6)	# set 'I' ccode bit
-	rts
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	fetch_dreg(): fetch register according to index in d1		#
-#									#
-# XREF ****************************************************************	#
-#	None								#
-#									#
-# INPUT ***************************************************************	#
-#	d1 = index of register to fetch from				#
-#									#
-# OUTPUT **************************************************************	#
-#	d0 = value of register fetched					#
-#									#
-# ALGORITHM ***********************************************************	#
-#	According to the index value in d1 which can range from zero	#
-# to fifteen, load the corresponding register file value (where		#
-# address register indexes start at 8). D0/D1/A0/A1/A6/A7 are on the	#
-# stack. The rest should still be in their original places.		#
-#									#
-#########################################################################
-
-# this routine leaves d1 intact for subsequent store_dreg calls.
-	global		fetch_dreg
-fetch_dreg:
-	mov.w		(tbl_fdreg.b,%pc,%d1.w*2),%d0
-	jmp		(tbl_fdreg.b,%pc,%d0.w*1)
-
-tbl_fdreg:
-	short		fdreg0 - tbl_fdreg
-	short		fdreg1 - tbl_fdreg
-	short		fdreg2 - tbl_fdreg
-	short		fdreg3 - tbl_fdreg
-	short		fdreg4 - tbl_fdreg
-	short		fdreg5 - tbl_fdreg
-	short		fdreg6 - tbl_fdreg
-	short		fdreg7 - tbl_fdreg
-	short		fdreg8 - tbl_fdreg
-	short		fdreg9 - tbl_fdreg
-	short		fdrega - tbl_fdreg
-	short		fdregb - tbl_fdreg
-	short		fdregc - tbl_fdreg
-	short		fdregd - tbl_fdreg
-	short		fdrege - tbl_fdreg
-	short		fdregf - tbl_fdreg
-
-fdreg0:
-	mov.l		EXC_DREGS+0x0(%a6),%d0
-	rts
-fdreg1:
-	mov.l		EXC_DREGS+0x4(%a6),%d0
-	rts
-fdreg2:
-	mov.l		%d2,%d0
-	rts
-fdreg3:
-	mov.l		%d3,%d0
-	rts
-fdreg4:
-	mov.l		%d4,%d0
-	rts
-fdreg5:
-	mov.l		%d5,%d0
-	rts
-fdreg6:
-	mov.l		%d6,%d0
-	rts
-fdreg7:
-	mov.l		%d7,%d0
-	rts
-fdreg8:
-	mov.l		EXC_DREGS+0x8(%a6),%d0
-	rts
-fdreg9:
-	mov.l		EXC_DREGS+0xc(%a6),%d0
-	rts
-fdrega:
-	mov.l		%a2,%d0
-	rts
-fdregb:
-	mov.l		%a3,%d0
-	rts
-fdregc:
-	mov.l		%a4,%d0
-	rts
-fdregd:
-	mov.l		%a5,%d0
-	rts
-fdrege:
-	mov.l		(%a6),%d0
-	rts
-fdregf:
-	mov.l		EXC_A7(%a6),%d0
-	rts
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	store_dreg_l(): store longword to data register specified by d1	#
-#									#
-# XREF ****************************************************************	#
-#	None								#
-#									#
-# INPUT ***************************************************************	#
-#	d0 = longowrd value to store					#
-#	d1 = index of register to fetch from				#
-#									#
-# OUTPUT **************************************************************	#
-#	(data register is updated)					#
-#									#
-# ALGORITHM ***********************************************************	#
-#	According to the index value in d1, store the longword value	#
-# in d0 to the corresponding data register. D0/D1 are on the stack	#
-# while the rest are in their initial places.				#
-#									#
-#########################################################################
-
-	global		store_dreg_l
-store_dreg_l:
-	mov.w		(tbl_sdregl.b,%pc,%d1.w*2),%d1
-	jmp		(tbl_sdregl.b,%pc,%d1.w*1)
-
-tbl_sdregl:
-	short		sdregl0 - tbl_sdregl
-	short		sdregl1 - tbl_sdregl
-	short		sdregl2 - tbl_sdregl
-	short		sdregl3 - tbl_sdregl
-	short		sdregl4 - tbl_sdregl
-	short		sdregl5 - tbl_sdregl
-	short		sdregl6 - tbl_sdregl
-	short		sdregl7 - tbl_sdregl
-
-sdregl0:
-	mov.l		%d0,EXC_DREGS+0x0(%a6)
-	rts
-sdregl1:
-	mov.l		%d0,EXC_DREGS+0x4(%a6)
-	rts
-sdregl2:
-	mov.l		%d0,%d2
-	rts
-sdregl3:
-	mov.l		%d0,%d3
-	rts
-sdregl4:
-	mov.l		%d0,%d4
-	rts
-sdregl5:
-	mov.l		%d0,%d5
-	rts
-sdregl6:
-	mov.l		%d0,%d6
-	rts
-sdregl7:
-	mov.l		%d0,%d7
-	rts
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	store_dreg_w(): store word to data register specified by d1	#
-#									#
-# XREF ****************************************************************	#
-#	None								#
-#									#
-# INPUT ***************************************************************	#
-#	d0 = word value to store					#
-#	d1 = index of register to fetch from				#
-#									#
-# OUTPUT **************************************************************	#
-#	(data register is updated)					#
-#									#
-# ALGORITHM ***********************************************************	#
-#	According to the index value in d1, store the word value	#
-# in d0 to the corresponding data register. D0/D1 are on the stack	#
-# while the rest are in their initial places.				#
-#									#
-#########################################################################
-
-	global		store_dreg_w
-store_dreg_w:
-	mov.w		(tbl_sdregw.b,%pc,%d1.w*2),%d1
-	jmp		(tbl_sdregw.b,%pc,%d1.w*1)
-
-tbl_sdregw:
-	short		sdregw0 - tbl_sdregw
-	short		sdregw1 - tbl_sdregw
-	short		sdregw2 - tbl_sdregw
-	short		sdregw3 - tbl_sdregw
-	short		sdregw4 - tbl_sdregw
-	short		sdregw5 - tbl_sdregw
-	short		sdregw6 - tbl_sdregw
-	short		sdregw7 - tbl_sdregw
-
-sdregw0:
-	mov.w		%d0,2+EXC_DREGS+0x0(%a6)
-	rts
-sdregw1:
-	mov.w		%d0,2+EXC_DREGS+0x4(%a6)
-	rts
-sdregw2:
-	mov.w		%d0,%d2
-	rts
-sdregw3:
-	mov.w		%d0,%d3
-	rts
-sdregw4:
-	mov.w		%d0,%d4
-	rts
-sdregw5:
-	mov.w		%d0,%d5
-	rts
-sdregw6:
-	mov.w		%d0,%d6
-	rts
-sdregw7:
-	mov.w		%d0,%d7
-	rts
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	store_dreg_b(): store byte to data register specified by d1	#
-#									#
-# XREF ****************************************************************	#
-#	None								#
-#									#
-# INPUT ***************************************************************	#
-#	d0 = byte value to store					#
-#	d1 = index of register to fetch from				#
-#									#
-# OUTPUT **************************************************************	#
-#	(data register is updated)					#
-#									#
-# ALGORITHM ***********************************************************	#
-#	According to the index value in d1, store the byte value	#
-# in d0 to the corresponding data register. D0/D1 are on the stack	#
-# while the rest are in their initial places.				#
-#									#
-#########################################################################
-
-	global		store_dreg_b
-store_dreg_b:
-	mov.w		(tbl_sdregb.b,%pc,%d1.w*2),%d1
-	jmp		(tbl_sdregb.b,%pc,%d1.w*1)
-
-tbl_sdregb:
-	short		sdregb0 - tbl_sdregb
-	short		sdregb1 - tbl_sdregb
-	short		sdregb2 - tbl_sdregb
-	short		sdregb3 - tbl_sdregb
-	short		sdregb4 - tbl_sdregb
-	short		sdregb5 - tbl_sdregb
-	short		sdregb6 - tbl_sdregb
-	short		sdregb7 - tbl_sdregb
-
-sdregb0:
-	mov.b		%d0,3+EXC_DREGS+0x0(%a6)
-	rts
-sdregb1:
-	mov.b		%d0,3+EXC_DREGS+0x4(%a6)
-	rts
-sdregb2:
-	mov.b		%d0,%d2
-	rts
-sdregb3:
-	mov.b		%d0,%d3
-	rts
-sdregb4:
-	mov.b		%d0,%d4
-	rts
-sdregb5:
-	mov.b		%d0,%d5
-	rts
-sdregb6:
-	mov.b		%d0,%d6
-	rts
-sdregb7:
-	mov.b		%d0,%d7
-	rts
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	inc_areg(): increment an address register by the value in d0	#
-#									#
-# XREF ****************************************************************	#
-#	None								#
-#									#
-# INPUT ***************************************************************	#
-#	d0 = amount to increment by					#
-#	d1 = index of address register to increment			#
-#									#
-# OUTPUT **************************************************************	#
-#	(address register is updated)					#
-#									#
-# ALGORITHM ***********************************************************	#
-#	Typically used for an instruction w/ a post-increment <ea>,	#
-# this routine adds the increment value in d0 to the address register	#
-# specified by d1. A0/A1/A6/A7 reside on the stack. The rest reside	#
-# in their original places.						#
-#	For a7, if the increment amount is one, then we have to		#
-# increment by two. For any a7 update, set the mia7_flag so that if	#
-# an access error exception occurs later in emulation, this address	#
-# register update can be undone.					#
-#									#
-#########################################################################
-
-	global		inc_areg
-inc_areg:
-	mov.w		(tbl_iareg.b,%pc,%d1.w*2),%d1
-	jmp		(tbl_iareg.b,%pc,%d1.w*1)
-
-tbl_iareg:
-	short		iareg0 - tbl_iareg
-	short		iareg1 - tbl_iareg
-	short		iareg2 - tbl_iareg
-	short		iareg3 - tbl_iareg
-	short		iareg4 - tbl_iareg
-	short		iareg5 - tbl_iareg
-	short		iareg6 - tbl_iareg
-	short		iareg7 - tbl_iareg
-
-iareg0:	add.l		%d0,EXC_DREGS+0x8(%a6)
-	rts
-iareg1:	add.l		%d0,EXC_DREGS+0xc(%a6)
-	rts
-iareg2:	add.l		%d0,%a2
-	rts
-iareg3:	add.l		%d0,%a3
-	rts
-iareg4:	add.l		%d0,%a4
-	rts
-iareg5:	add.l		%d0,%a5
-	rts
-iareg6:	add.l		%d0,(%a6)
-	rts
-iareg7:	mov.b		&mia7_flg,SPCOND_FLG(%a6)
-	cmpi.b		%d0,&0x1
-	beq.b		iareg7b
-	add.l		%d0,EXC_A7(%a6)
-	rts
-iareg7b:
-	addq.l		&0x2,EXC_A7(%a6)
-	rts
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	dec_areg(): decrement an address register by the value in d0	#
-#									#
-# XREF ****************************************************************	#
-#	None								#
-#									#
-# INPUT ***************************************************************	#
-#	d0 = amount to decrement by					#
-#	d1 = index of address register to decrement			#
-#									#
-# OUTPUT **************************************************************	#
-#	(address register is updated)					#
-#									#
-# ALGORITHM ***********************************************************	#
-#	Typically used for an instruction w/ a pre-decrement <ea>,	#
-# this routine adds the decrement value in d0 to the address register	#
-# specified by d1. A0/A1/A6/A7 reside on the stack. The rest reside	#
-# in their original places.						#
-#	For a7, if the decrement amount is one, then we have to		#
-# decrement by two. For any a7 update, set the mda7_flag so that if	#
-# an access error exception occurs later in emulation, this address	#
-# register update can be undone.					#
-#									#
-#########################################################################
-
-	global		dec_areg
-dec_areg:
-	mov.w		(tbl_dareg.b,%pc,%d1.w*2),%d1
-	jmp		(tbl_dareg.b,%pc,%d1.w*1)
-
-tbl_dareg:
-	short		dareg0 - tbl_dareg
-	short		dareg1 - tbl_dareg
-	short		dareg2 - tbl_dareg
-	short		dareg3 - tbl_dareg
-	short		dareg4 - tbl_dareg
-	short		dareg5 - tbl_dareg
-	short		dareg6 - tbl_dareg
-	short		dareg7 - tbl_dareg
-
-dareg0:	sub.l		%d0,EXC_DREGS+0x8(%a6)
-	rts
-dareg1:	sub.l		%d0,EXC_DREGS+0xc(%a6)
-	rts
-dareg2:	sub.l		%d0,%a2
-	rts
-dareg3:	sub.l		%d0,%a3
-	rts
-dareg4:	sub.l		%d0,%a4
-	rts
-dareg5:	sub.l		%d0,%a5
-	rts
-dareg6:	sub.l		%d0,(%a6)
-	rts
-dareg7:	mov.b		&mda7_flg,SPCOND_FLG(%a6)
-	cmpi.b		%d0,&0x1
-	beq.b		dareg7b
-	sub.l		%d0,EXC_A7(%a6)
-	rts
-dareg7b:
-	subq.l		&0x2,EXC_A7(%a6)
-	rts
-
-##############################################################################
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	load_fpn1(): load FP register value into FP_SRC(a6).		#
-#									#
-# XREF ****************************************************************	#
-#	None								#
-#									#
-# INPUT ***************************************************************	#
-#	d0 = index of FP register to load				#
-#									#
-# OUTPUT **************************************************************	#
-#	FP_SRC(a6) = value loaded from FP register file			#
-#									#
-# ALGORITHM ***********************************************************	#
-#	Using the index in d0, load FP_SRC(a6) with a number from the	#
-# FP register file.							#
-#									#
-#########################################################################
-
-	global		load_fpn1
-load_fpn1:
-	mov.w		(tbl_load_fpn1.b,%pc,%d0.w*2), %d0
-	jmp		(tbl_load_fpn1.b,%pc,%d0.w*1)
-
-tbl_load_fpn1:
-	short		load_fpn1_0 - tbl_load_fpn1
-	short		load_fpn1_1 - tbl_load_fpn1
-	short		load_fpn1_2 - tbl_load_fpn1
-	short		load_fpn1_3 - tbl_load_fpn1
-	short		load_fpn1_4 - tbl_load_fpn1
-	short		load_fpn1_5 - tbl_load_fpn1
-	short		load_fpn1_6 - tbl_load_fpn1
-	short		load_fpn1_7 - tbl_load_fpn1
-
-load_fpn1_0:
-	mov.l		0+EXC_FP0(%a6), 0+FP_SRC(%a6)
-	mov.l		4+EXC_FP0(%a6), 4+FP_SRC(%a6)
-	mov.l		8+EXC_FP0(%a6), 8+FP_SRC(%a6)
-	lea		FP_SRC(%a6), %a0
-	rts
-load_fpn1_1:
-	mov.l		0+EXC_FP1(%a6), 0+FP_SRC(%a6)
-	mov.l		4+EXC_FP1(%a6), 4+FP_SRC(%a6)
-	mov.l		8+EXC_FP1(%a6), 8+FP_SRC(%a6)
-	lea		FP_SRC(%a6), %a0
-	rts
-load_fpn1_2:
-	fmovm.x		&0x20, FP_SRC(%a6)
-	lea		FP_SRC(%a6), %a0
-	rts
-load_fpn1_3:
-	fmovm.x		&0x10, FP_SRC(%a6)
-	lea		FP_SRC(%a6), %a0
-	rts
-load_fpn1_4:
-	fmovm.x		&0x08, FP_SRC(%a6)
-	lea		FP_SRC(%a6), %a0
-	rts
-load_fpn1_5:
-	fmovm.x		&0x04, FP_SRC(%a6)
-	lea		FP_SRC(%a6), %a0
-	rts
-load_fpn1_6:
-	fmovm.x		&0x02, FP_SRC(%a6)
-	lea		FP_SRC(%a6), %a0
-	rts
-load_fpn1_7:
-	fmovm.x		&0x01, FP_SRC(%a6)
-	lea		FP_SRC(%a6), %a0
-	rts
-
-#############################################################################
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	load_fpn2(): load FP register value into FP_DST(a6).		#
-#									#
-# XREF ****************************************************************	#
-#	None								#
-#									#
-# INPUT ***************************************************************	#
-#	d0 = index of FP register to load				#
-#									#
-# OUTPUT **************************************************************	#
-#	FP_DST(a6) = value loaded from FP register file			#
-#									#
-# ALGORITHM ***********************************************************	#
-#	Using the index in d0, load FP_DST(a6) with a number from the	#
-# FP register file.							#
-#									#
-#########################################################################
-
-	global		load_fpn2
-load_fpn2:
-	mov.w		(tbl_load_fpn2.b,%pc,%d0.w*2), %d0
-	jmp		(tbl_load_fpn2.b,%pc,%d0.w*1)
-
-tbl_load_fpn2:
-	short		load_fpn2_0 - tbl_load_fpn2
-	short		load_fpn2_1 - tbl_load_fpn2
-	short		load_fpn2_2 - tbl_load_fpn2
-	short		load_fpn2_3 - tbl_load_fpn2
-	short		load_fpn2_4 - tbl_load_fpn2
-	short		load_fpn2_5 - tbl_load_fpn2
-	short		load_fpn2_6 - tbl_load_fpn2
-	short		load_fpn2_7 - tbl_load_fpn2
-
-load_fpn2_0:
-	mov.l		0+EXC_FP0(%a6), 0+FP_DST(%a6)
-	mov.l		4+EXC_FP0(%a6), 4+FP_DST(%a6)
-	mov.l		8+EXC_FP0(%a6), 8+FP_DST(%a6)
-	lea		FP_DST(%a6), %a0
-	rts
-load_fpn2_1:
-	mov.l		0+EXC_FP1(%a6), 0+FP_DST(%a6)
-	mov.l		4+EXC_FP1(%a6), 4+FP_DST(%a6)
-	mov.l		8+EXC_FP1(%a6), 8+FP_DST(%a6)
-	lea		FP_DST(%a6), %a0
-	rts
-load_fpn2_2:
-	fmovm.x		&0x20, FP_DST(%a6)
-	lea		FP_DST(%a6), %a0
-	rts
-load_fpn2_3:
-	fmovm.x		&0x10, FP_DST(%a6)
-	lea		FP_DST(%a6), %a0
-	rts
-load_fpn2_4:
-	fmovm.x		&0x08, FP_DST(%a6)
-	lea		FP_DST(%a6), %a0
-	rts
-load_fpn2_5:
-	fmovm.x		&0x04, FP_DST(%a6)
-	lea		FP_DST(%a6), %a0
-	rts
-load_fpn2_6:
-	fmovm.x		&0x02, FP_DST(%a6)
-	lea		FP_DST(%a6), %a0
-	rts
-load_fpn2_7:
-	fmovm.x		&0x01, FP_DST(%a6)
-	lea		FP_DST(%a6), %a0
-	rts
-
-#############################################################################
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	store_fpreg(): store an fp value to the fpreg designated d0.	#
-#									#
-# XREF ****************************************************************	#
-#	None								#
-#									#
-# INPUT ***************************************************************	#
-#	fp0 = extended precision value to store				#
-#	d0  = index of floating-point register				#
-#									#
-# OUTPUT **************************************************************	#
-#	None								#
-#									#
-# ALGORITHM ***********************************************************	#
-#	Store the value in fp0 to the FP register designated by the	#
-# value in d0. The FP number can be DENORM or SNAN so we have to be	#
-# careful that we don't take an exception here.				#
-#									#
-#########################################################################
-
-	global		store_fpreg
-store_fpreg:
-	mov.w		(tbl_store_fpreg.b,%pc,%d0.w*2), %d0
-	jmp		(tbl_store_fpreg.b,%pc,%d0.w*1)
-
-tbl_store_fpreg:
-	short		store_fpreg_0 - tbl_store_fpreg
-	short		store_fpreg_1 - tbl_store_fpreg
-	short		store_fpreg_2 - tbl_store_fpreg
-	short		store_fpreg_3 - tbl_store_fpreg
-	short		store_fpreg_4 - tbl_store_fpreg
-	short		store_fpreg_5 - tbl_store_fpreg
-	short		store_fpreg_6 - tbl_store_fpreg
-	short		store_fpreg_7 - tbl_store_fpreg
-
-store_fpreg_0:
-	fmovm.x		&0x80, EXC_FP0(%a6)
-	rts
-store_fpreg_1:
-	fmovm.x		&0x80, EXC_FP1(%a6)
-	rts
-store_fpreg_2:
-	fmovm.x		&0x01, -(%sp)
-	fmovm.x		(%sp)+, &0x20
-	rts
-store_fpreg_3:
-	fmovm.x		&0x01, -(%sp)
-	fmovm.x		(%sp)+, &0x10
-	rts
-store_fpreg_4:
-	fmovm.x		&0x01, -(%sp)
-	fmovm.x		(%sp)+, &0x08
-	rts
-store_fpreg_5:
-	fmovm.x		&0x01, -(%sp)
-	fmovm.x		(%sp)+, &0x04
-	rts
-store_fpreg_6:
-	fmovm.x		&0x01, -(%sp)
-	fmovm.x		(%sp)+, &0x02
-	rts
-store_fpreg_7:
-	fmovm.x		&0x01, -(%sp)
-	fmovm.x		(%sp)+, &0x01
-	rts
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	get_packed(): fetch a packed operand from memory and then	#
-#		      convert it to a floating-point binary number.	#
-#									#
-# XREF ****************************************************************	#
-#	_dcalc_ea() - calculate the correct <ea>			#
-#	_mem_read() - fetch the packed operand from memory		#
-#	facc_in_x() - the fetch failed so jump to special exit code	#
-#	decbin()    - convert packed to binary extended precision	#
-#									#
-# INPUT ***************************************************************	#
-#	None								#
-#									#
-# OUTPUT **************************************************************	#
-#	If no failure on _mem_read():					#
-#	FP_SRC(a6) = packed operand now as a binary FP number		#
-#									#
-# ALGORITHM ***********************************************************	#
-#	Get the correct <ea> which is the value on the exception stack	#
-# frame w/ maybe a correction factor if the <ea> is -(an) or (an)+.	#
-# Then, fetch the operand from memory. If the fetch fails, exit		#
-# through facc_in_x().							#
-#	If the packed operand is a ZERO,NAN, or INF, convert it to	#
-# its binary representation here. Else, call decbin() which will	#
-# convert the packed value to an extended precision binary value.	#
-#									#
-#########################################################################
-
-# the stacked <ea> for packed is correct except for -(An).
-# the base reg must be updated for both -(An) and (An)+.
-	global		get_packed
-get_packed:
-	mov.l		&0xc,%d0		# packed is 12 bytes
-	bsr.l		_dcalc_ea		# fetch <ea>; correct An
-
-	lea		FP_SRC(%a6),%a1		# pass: ptr to super dst
-	mov.l		&0xc,%d0		# pass: 12 bytes
-	bsr.l		_dmem_read		# read packed operand
-
-	tst.l		%d1			# did dfetch fail?
-	bne.l		facc_in_x		# yes
-
-# The packed operand is an INF or a NAN if the exponent field is all ones.
-	bfextu		FP_SRC(%a6){&1:&15},%d0	# get exp
-	cmpi.w		%d0,&0x7fff		# INF or NAN?
-	bne.b		gp_try_zero		# no
-	rts					# operand is an INF or NAN
-
-# The packed operand is a zero if the mantissa is all zero, else it's
-# a normal packed op.
-gp_try_zero:
-	mov.b		3+FP_SRC(%a6),%d0	# get byte 4
-	andi.b		&0x0f,%d0		# clear all but last nybble
-	bne.b		gp_not_spec		# not a zero
-	tst.l		FP_SRC_HI(%a6)		# is lw 2 zero?
-	bne.b		gp_not_spec		# not a zero
-	tst.l		FP_SRC_LO(%a6)		# is lw 3 zero?
-	bne.b		gp_not_spec		# not a zero
-	rts					# operand is a ZERO
-gp_not_spec:
-	lea		FP_SRC(%a6),%a0		# pass: ptr to packed op
-	bsr.l		decbin			# convert to extended
-	fmovm.x		&0x80,FP_SRC(%a6)	# make this the srcop
-	rts
-
-#########################################################################
-# decbin(): Converts normalized packed bcd value pointed to by register	#
-#	    a0 to extended-precision value in fp0.			#
-#									#
-# INPUT ***************************************************************	#
-#	a0 = pointer to normalized packed bcd value			#
-#									#
-# OUTPUT **************************************************************	#
-#	fp0 = exact fp representation of the packed bcd value.		#
-#									#
-# ALGORITHM ***********************************************************	#
-#	Expected is a normal bcd (i.e. non-exceptional; all inf, zero,	#
-#	and NaN operands are dispatched without entering this routine)	#
-#	value in 68881/882 format at location (a0).			#
-#									#
-#	A1. Convert the bcd exponent to binary by successive adds and	#
-#	muls. Set the sign according to SE. Subtract 16 to compensate	#
-#	for the mantissa which is to be interpreted as 17 integer	#
-#	digits, rather than 1 integer and 16 fraction digits.		#
-#	Note: this operation can never overflow.			#
-#									#
-#	A2. Convert the bcd mantissa to binary by successive		#
-#	adds and muls in FP0. Set the sign according to SM.		#
-#	The mantissa digits will be converted with the decimal point	#
-#	assumed following the least-significant digit.			#
-#	Note: this operation can never overflow.			#
-#									#
-#	A3. Count the number of leading/trailing zeros in the		#
-#	bcd string.  If SE is positive, count the leading zeros;	#
-#	if negative, count the trailing zeros.  Set the adjusted	#
-#	exponent equal to the exponent from A1 and the zero count	#
-#	added if SM = 1 and subtracted if SM = 0.  Scale the		#
-#	mantissa the equivalent of forcing in the bcd value:		#
-#									#
-#	SM = 0	a non-zero digit in the integer position		#
-#	SM = 1	a non-zero digit in Mant0, lsd of the fraction		#
-#									#
-#	this will insure that any value, regardless of its		#
-#	representation (ex. 0.1E2, 1E1, 10E0, 100E-1), is converted	#
-#	consistently.							#
-#									#
-#	A4. Calculate the factor 10^exp in FP1 using a table of		#
-#	10^(2^n) values.  To reduce the error in forming factors	#
-#	greater than 10^27, a directed rounding scheme is used with	#
-#	tables rounded to RN, RM, and RP, according to the table	#
-#	in the comments of the pwrten section.				#
-#									#
-#	A5. Form the final binary number by scaling the mantissa by	#
-#	the exponent factor.  This is done by multiplying the		#
-#	mantissa in FP0 by the factor in FP1 if the adjusted		#
-#	exponent sign is positive, and dividing FP0 by FP1 if		#
-#	it is negative.							#
-#									#
-#	Clean up and return. Check if the final mul or div was inexact.	#
-#	If so, set INEX1 in USER_FPSR.					#
-#									#
-#########################################################################
-
-#
-#	PTENRN, PTENRM, and PTENRP are arrays of powers of 10 rounded
-#	to nearest, minus, and plus, respectively.  The tables include
-#	10**{1,2,4,8,16,32,64,128,256,512,1024,2048,4096}.  No rounding
-#	is required until the power is greater than 27, however, all
-#	tables include the first 5 for ease of indexing.
-#
-RTABLE:
-	byte		0,0,0,0
-	byte		2,3,2,3
-	byte		2,3,3,2
-	byte		3,2,2,3
-
-	set		FNIBS,7
-	set		FSTRT,0
-
-	set		ESTRT,4
-	set		EDIGITS,2
-
-	global		decbin
-decbin:
-	mov.l		0x0(%a0),FP_SCR0_EX(%a6) # make a copy of input
-	mov.l		0x4(%a0),FP_SCR0_HI(%a6) # so we don't alter it
-	mov.l		0x8(%a0),FP_SCR0_LO(%a6)
-
-	lea		FP_SCR0(%a6),%a0
-
-	movm.l		&0x3c00,-(%sp)		# save d2-d5
-	fmovm.x		&0x1,-(%sp)		# save fp1
-#
-# Calculate exponent:
-#  1. Copy bcd value in memory for use as a working copy.
-#  2. Calculate absolute value of exponent in d1 by mul and add.
-#  3. Correct for exponent sign.
-#  4. Subtract 16 to compensate for interpreting the mant as all integer digits.
-#     (i.e., all digits assumed left of the decimal point.)
-#
-# Register usage:
-#
-#  calc_e:
-#	(*)  d0: temp digit storage
-#	(*)  d1: accumulator for binary exponent
-#	(*)  d2: digit count
-#	(*)  d3: offset pointer
-#	( )  d4: first word of bcd
-#	( )  a0: pointer to working bcd value
-#	( )  a6: pointer to original bcd value
-#	(*)  FP_SCR1: working copy of original bcd value
-#	(*)  L_SCR1: copy of original exponent word
-#
-calc_e:
-	mov.l		&EDIGITS,%d2		# # of nibbles (digits) in fraction part
-	mov.l		&ESTRT,%d3		# counter to pick up digits
-	mov.l		(%a0),%d4		# get first word of bcd
-	clr.l		%d1			# zero d1 for accumulator
-e_gd:
-	mulu.l		&0xa,%d1		# mul partial product by one digit place
-	bfextu		%d4{%d3:&4},%d0		# get the digit and zero extend into d0
-	add.l		%d0,%d1			# d1 = d1 + d0
-	addq.b		&4,%d3			# advance d3 to the next digit
-	dbf.w		%d2,e_gd		# if we have used all 3 digits, exit loop
-	btst		&30,%d4			# get SE
-	beq.b		e_pos			# don't negate if pos
-	neg.l		%d1			# negate before subtracting
-e_pos:
-	sub.l		&16,%d1			# sub to compensate for shift of mant
-	bge.b		e_save			# if still pos, do not neg
-	neg.l		%d1			# now negative, make pos and set SE
-	or.l		&0x40000000,%d4		# set SE in d4,
-	or.l		&0x40000000,(%a0)	# and in working bcd
-e_save:
-	mov.l		%d1,-(%sp)		# save exp on stack
-#
-#
-# Calculate mantissa:
-#  1. Calculate absolute value of mantissa in fp0 by mul and add.
-#  2. Correct for mantissa sign.
-#     (i.e., all digits assumed left of the decimal point.)
-#
-# Register usage:
-#
-#  calc_m:
-#	(*)  d0: temp digit storage
-#	(*)  d1: lword counter
-#	(*)  d2: digit count
-#	(*)  d3: offset pointer
-#	( )  d4: words 2 and 3 of bcd
-#	( )  a0: pointer to working bcd value
-#	( )  a6: pointer to original bcd value
-#	(*) fp0: mantissa accumulator
-#	( )  FP_SCR1: working copy of original bcd value
-#	( )  L_SCR1: copy of original exponent word
-#
-calc_m:
-	mov.l		&1,%d1			# word counter, init to 1
-	fmov.s		&0x00000000,%fp0	# accumulator
-#
-#
-#  Since the packed number has a long word between the first & second parts,
-#  get the integer digit then skip down & get the rest of the
-#  mantissa.  We will unroll the loop once.
-#
-	bfextu		(%a0){&28:&4},%d0	# integer part is ls digit in long word
-	fadd.b		%d0,%fp0		# add digit to sum in fp0
-#
-#
-#  Get the rest of the mantissa.
-#
-loadlw:
-	mov.l		(%a0,%d1.L*4),%d4	# load mantissa lonqword into d4
-	mov.l		&FSTRT,%d3		# counter to pick up digits
-	mov.l		&FNIBS,%d2		# reset number of digits per a0 ptr
-md2b:
-	fmul.s		&0x41200000,%fp0	# fp0 = fp0 * 10
-	bfextu		%d4{%d3:&4},%d0		# get the digit and zero extend
-	fadd.b		%d0,%fp0		# fp0 = fp0 + digit
-#
-#
-#  If all the digits (8) in that long word have been converted (d2=0),
-#  then inc d1 (=2) to point to the next long word and reset d3 to 0
-#  to initialize the digit offset, and set d2 to 7 for the digit count;
-#  else continue with this long word.
-#
-	addq.b		&4,%d3			# advance d3 to the next digit
-	dbf.w		%d2,md2b		# check for last digit in this lw
-nextlw:
-	addq.l		&1,%d1			# inc lw pointer in mantissa
-	cmp.l		%d1,&2			# test for last lw
-	ble.b		loadlw			# if not, get last one
-#
-#  Check the sign of the mant and make the value in fp0 the same sign.
-#
-m_sign:
-	btst		&31,(%a0)		# test sign of the mantissa
-	beq.b		ap_st_z			# if clear, go to append/strip zeros
-	fneg.x		%fp0			# if set, negate fp0
-#
-# Append/strip zeros:
-#
-#  For adjusted exponents which have an absolute value greater than 27*,
-#  this routine calculates the amount needed to normalize the mantissa
-#  for the adjusted exponent.  That number is subtracted from the exp
-#  if the exp was positive, and added if it was negative.  The purpose
-#  of this is to reduce the value of the exponent and the possibility
-#  of error in calculation of pwrten.
-#
-#  1. Branch on the sign of the adjusted exponent.
-#  2p.(positive exp)
-#   2. Check M16 and the digits in lwords 2 and 3 in decending order.
-#   3. Add one for each zero encountered until a non-zero digit.
-#   4. Subtract the count from the exp.
-#   5. Check if the exp has crossed zero in #3 above; make the exp abs
-#	   and set SE.
-#	6. Multiply the mantissa by 10**count.
-#  2n.(negative exp)
-#   2. Check the digits in lwords 3 and 2 in decending order.
-#   3. Add one for each zero encountered until a non-zero digit.
-#   4. Add the count to the exp.
-#   5. Check if the exp has crossed zero in #3 above; clear SE.
-#   6. Divide the mantissa by 10**count.
-#
-#  *Why 27?  If the adjusted exponent is within -28 < expA < 28, than
-#   any adjustment due to append/strip zeros will drive the resultane
-#   exponent towards zero.  Since all pwrten constants with a power
-#   of 27 or less are exact, there is no need to use this routine to
-#   attempt to lessen the resultant exponent.
-#
-# Register usage:
-#
-#  ap_st_z:
-#	(*)  d0: temp digit storage
-#	(*)  d1: zero count
-#	(*)  d2: digit count
-#	(*)  d3: offset pointer
-#	( )  d4: first word of bcd
-#	(*)  d5: lword counter
-#	( )  a0: pointer to working bcd value
-#	( )  FP_SCR1: working copy of original bcd value
-#	( )  L_SCR1: copy of original exponent word
-#
-#
-# First check the absolute value of the exponent to see if this
-# routine is necessary.  If so, then check the sign of the exponent
-# and do append (+) or strip (-) zeros accordingly.
-# This section handles a positive adjusted exponent.
-#
-ap_st_z:
-	mov.l		(%sp),%d1		# load expA for range test
-	cmp.l		%d1,&27			# test is with 27
-	ble.w		pwrten			# if abs(expA) <28, skip ap/st zeros
-	btst		&30,(%a0)		# check sign of exp
-	bne.b		ap_st_n			# if neg, go to neg side
-	clr.l		%d1			# zero count reg
-	mov.l		(%a0),%d4		# load lword 1 to d4
-	bfextu		%d4{&28:&4},%d0		# get M16 in d0
-	bne.b		ap_p_fx			# if M16 is non-zero, go fix exp
-	addq.l		&1,%d1			# inc zero count
-	mov.l		&1,%d5			# init lword counter
-	mov.l		(%a0,%d5.L*4),%d4	# get lword 2 to d4
-	bne.b		ap_p_cl			# if lw 2 is zero, skip it
-	addq.l		&8,%d1			# and inc count by 8
-	addq.l		&1,%d5			# inc lword counter
-	mov.l		(%a0,%d5.L*4),%d4	# get lword 3 to d4
-ap_p_cl:
-	clr.l		%d3			# init offset reg
-	mov.l		&7,%d2			# init digit counter
-ap_p_gd:
-	bfextu		%d4{%d3:&4},%d0		# get digit
-	bne.b		ap_p_fx			# if non-zero, go to fix exp
-	addq.l		&4,%d3			# point to next digit
-	addq.l		&1,%d1			# inc digit counter
-	dbf.w		%d2,ap_p_gd		# get next digit
-ap_p_fx:
-	mov.l		%d1,%d0			# copy counter to d2
-	mov.l		(%sp),%d1		# get adjusted exp from memory
-	sub.l		%d0,%d1			# subtract count from exp
-	bge.b		ap_p_fm			# if still pos, go to pwrten
-	neg.l		%d1			# now its neg; get abs
-	mov.l		(%a0),%d4		# load lword 1 to d4
-	or.l		&0x40000000,%d4		# and set SE in d4
-	or.l		&0x40000000,(%a0)	# and in memory
-#
-# Calculate the mantissa multiplier to compensate for the striping of
-# zeros from the mantissa.
-#
-ap_p_fm:
-	lea.l		PTENRN(%pc),%a1		# get address of power-of-ten table
-	clr.l		%d3			# init table index
-	fmov.s		&0x3f800000,%fp1	# init fp1 to 1
-	mov.l		&3,%d2			# init d2 to count bits in counter
-ap_p_el:
-	asr.l		&1,%d0			# shift lsb into carry
-	bcc.b		ap_p_en			# if 1, mul fp1 by pwrten factor
-	fmul.x		(%a1,%d3),%fp1		# mul by 10**(d3_bit_no)
-ap_p_en:
-	add.l		&12,%d3			# inc d3 to next rtable entry
-	tst.l		%d0			# check if d0 is zero
-	bne.b		ap_p_el			# if not, get next bit
-	fmul.x		%fp1,%fp0		# mul mantissa by 10**(no_bits_shifted)
-	bra.b		pwrten			# go calc pwrten
-#
-# This section handles a negative adjusted exponent.
-#
-ap_st_n:
-	clr.l		%d1			# clr counter
-	mov.l		&2,%d5			# set up d5 to point to lword 3
-	mov.l		(%a0,%d5.L*4),%d4	# get lword 3
-	bne.b		ap_n_cl			# if not zero, check digits
-	sub.l		&1,%d5			# dec d5 to point to lword 2
-	addq.l		&8,%d1			# inc counter by 8
-	mov.l		(%a0,%d5.L*4),%d4	# get lword 2
-ap_n_cl:
-	mov.l		&28,%d3			# point to last digit
-	mov.l		&7,%d2			# init digit counter
-ap_n_gd:
-	bfextu		%d4{%d3:&4},%d0		# get digit
-	bne.b		ap_n_fx			# if non-zero, go to exp fix
-	subq.l		&4,%d3			# point to previous digit
-	addq.l		&1,%d1			# inc digit counter
-	dbf.w		%d2,ap_n_gd		# get next digit
-ap_n_fx:
-	mov.l		%d1,%d0			# copy counter to d0
-	mov.l		(%sp),%d1		# get adjusted exp from memory
-	sub.l		%d0,%d1			# subtract count from exp
-	bgt.b		ap_n_fm			# if still pos, go fix mantissa
-	neg.l		%d1			# take abs of exp and clr SE
-	mov.l		(%a0),%d4		# load lword 1 to d4
-	and.l		&0xbfffffff,%d4		# and clr SE in d4
-	and.l		&0xbfffffff,(%a0)	# and in memory
-#
-# Calculate the mantissa multiplier to compensate for the appending of
-# zeros to the mantissa.
-#
-ap_n_fm:
-	lea.l		PTENRN(%pc),%a1		# get address of power-of-ten table
-	clr.l		%d3			# init table index
-	fmov.s		&0x3f800000,%fp1	# init fp1 to 1
-	mov.l		&3,%d2			# init d2 to count bits in counter
-ap_n_el:
-	asr.l		&1,%d0			# shift lsb into carry
-	bcc.b		ap_n_en			# if 1, mul fp1 by pwrten factor
-	fmul.x		(%a1,%d3),%fp1		# mul by 10**(d3_bit_no)
-ap_n_en:
-	add.l		&12,%d3			# inc d3 to next rtable entry
-	tst.l		%d0			# check if d0 is zero
-	bne.b		ap_n_el			# if not, get next bit
-	fdiv.x		%fp1,%fp0		# div mantissa by 10**(no_bits_shifted)
-#
-#
-# Calculate power-of-ten factor from adjusted and shifted exponent.
-#
-# Register usage:
-#
-#  pwrten:
-#	(*)  d0: temp
-#	( )  d1: exponent
-#	(*)  d2: {FPCR[6:5],SM,SE} as index in RTABLE; temp
-#	(*)  d3: FPCR work copy
-#	( )  d4: first word of bcd
-#	(*)  a1: RTABLE pointer
-#  calc_p:
-#	(*)  d0: temp
-#	( )  d1: exponent
-#	(*)  d3: PWRTxx table index
-#	( )  a0: pointer to working copy of bcd
-#	(*)  a1: PWRTxx pointer
-#	(*) fp1: power-of-ten accumulator
-#
-# Pwrten calculates the exponent factor in the selected rounding mode
-# according to the following table:
-#
-#	Sign of Mant  Sign of Exp  Rounding Mode  PWRTEN Rounding Mode
-#
-#	ANY	  ANY	RN	RN
-#
-#	 +	   +	RP	RP
-#	 -	   +	RP	RM
-#	 +	   -	RP	RM
-#	 -	   -	RP	RP
-#
-#	 +	   +	RM	RM
-#	 -	   +	RM	RP
-#	 +	   -	RM	RP
-#	 -	   -	RM	RM
-#
-#	 +	   +	RZ	RM
-#	 -	   +	RZ	RM
-#	 +	   -	RZ	RP
-#	 -	   -	RZ	RP
-#
-#
-pwrten:
-	mov.l		USER_FPCR(%a6),%d3	# get user's FPCR
-	bfextu		%d3{&26:&2},%d2		# isolate rounding mode bits
-	mov.l		(%a0),%d4		# reload 1st bcd word to d4
-	asl.l		&2,%d2			# format d2 to be
-	bfextu		%d4{&0:&2},%d0		# {FPCR[6],FPCR[5],SM,SE}
-	add.l		%d0,%d2			# in d2 as index into RTABLE
-	lea.l		RTABLE(%pc),%a1		# load rtable base
-	mov.b		(%a1,%d2),%d0		# load new rounding bits from table
-	clr.l		%d3			# clear d3 to force no exc and extended
-	bfins		%d0,%d3{&26:&2}		# stuff new rounding bits in FPCR
-	fmov.l		%d3,%fpcr		# write new FPCR
-	asr.l		&1,%d0			# write correct PTENxx table
-	bcc.b		not_rp			# to a1
-	lea.l		PTENRP(%pc),%a1		# it is RP
-	bra.b		calc_p			# go to init section
-not_rp:
-	asr.l		&1,%d0			# keep checking
-	bcc.b		not_rm
-	lea.l		PTENRM(%pc),%a1		# it is RM
-	bra.b		calc_p			# go to init section
-not_rm:
-	lea.l		PTENRN(%pc),%a1		# it is RN
-calc_p:
-	mov.l		%d1,%d0			# copy exp to d0;use d0
-	bpl.b		no_neg			# if exp is negative,
-	neg.l		%d0			# invert it
-	or.l		&0x40000000,(%a0)	# and set SE bit
-no_neg:
-	clr.l		%d3			# table index
-	fmov.s		&0x3f800000,%fp1	# init fp1 to 1
-e_loop:
-	asr.l		&1,%d0			# shift next bit into carry
-	bcc.b		e_next			# if zero, skip the mul
-	fmul.x		(%a1,%d3),%fp1		# mul by 10**(d3_bit_no)
-e_next:
-	add.l		&12,%d3			# inc d3 to next rtable entry
-	tst.l		%d0			# check if d0 is zero
-	bne.b		e_loop			# not zero, continue shifting
-#
-#
-#  Check the sign of the adjusted exp and make the value in fp0 the
-#  same sign. If the exp was pos then multiply fp1*fp0;
-#  else divide fp0/fp1.
-#
-# Register Usage:
-#  norm:
-#	( )  a0: pointer to working bcd value
-#	(*) fp0: mantissa accumulator
-#	( ) fp1: scaling factor - 10**(abs(exp))
-#
-pnorm:
-	btst		&30,(%a0)		# test the sign of the exponent
-	beq.b		mul			# if clear, go to multiply
-div:
-	fdiv.x		%fp1,%fp0		# exp is negative, so divide mant by exp
-	bra.b		end_dec
-mul:
-	fmul.x		%fp1,%fp0		# exp is positive, so multiply by exp
-#
-#
-# Clean up and return with result in fp0.
-#
-# If the final mul/div in decbin incurred an inex exception,
-# it will be inex2, but will be reported as inex1 by get_op.
-#
-end_dec:
-	fmov.l		%fpsr,%d0		# get status register
-	bclr		&inex2_bit+8,%d0	# test for inex2 and clear it
-	beq.b		no_exc			# skip this if no exc
-	ori.w		&inx1a_mask,2+USER_FPSR(%a6) # set INEX1/AINEX
-no_exc:
-	add.l		&0x4,%sp		# clear 1 lw param
-	fmovm.x		(%sp)+,&0x40		# restore fp1
-	movm.l		(%sp)+,&0x3c		# restore d2-d5
-	fmov.l		&0x0,%fpcr
-	fmov.l		&0x0,%fpsr
-	rts
-
-#########################################################################
-# bindec(): Converts an input in extended precision format to bcd format#
-#									#
-# INPUT ***************************************************************	#
-#	a0 = pointer to the input extended precision value in memory.	#
-#	     the input may be either normalized, unnormalized, or	#
-#	     denormalized.						#
-#	d0 = contains the k-factor sign-extended to 32-bits.		#
-#									#
-# OUTPUT **************************************************************	#
-#	FP_SCR0(a6) = bcd format result on the stack.			#
-#									#
-# ALGORITHM ***********************************************************	#
-#									#
-#	A1.	Set RM and size ext;  Set SIGMA = sign of input.	#
-#		The k-factor is saved for use in d7. Clear the		#
-#		BINDEC_FLG for separating normalized/denormalized	#
-#		input.  If input is unnormalized or denormalized,	#
-#		normalize it.						#
-#									#
-#	A2.	Set X = abs(input).					#
-#									#
-#	A3.	Compute ILOG.						#
-#		ILOG is the log base 10 of the input value.  It is	#
-#		approximated by adding e + 0.f when the original	#
-#		value is viewed as 2^^e * 1.f in extended precision.	#
-#		This value is stored in d6.				#
-#									#
-#	A4.	Clr INEX bit.						#
-#		The operation in A3 above may have set INEX2.		#
-#									#
-#	A5.	Set ICTR = 0;						#
-#		ICTR is a flag used in A13.  It must be set before the	#
-#		loop entry A6.						#
-#									#
-#	A6.	Calculate LEN.						#
-#		LEN is the number of digits to be displayed.  The	#
-#		k-factor can dictate either the total number of digits,	#
-#		if it is a positive number, or the number of digits	#
-#		after the decimal point which are to be included as	#
-#		significant.  See the 68882 manual for examples.	#
-#		If LEN is computed to be greater than 17, set OPERR in	#
-#		USER_FPSR.  LEN is stored in d4.			#
-#									#
-#	A7.	Calculate SCALE.					#
-#		SCALE is equal to 10^ISCALE, where ISCALE is the number	#
-#		of decimal places needed to insure LEN integer digits	#
-#		in the output before conversion to bcd. LAMBDA is the	#
-#		sign of ISCALE, used in A9. Fp1 contains		#
-#		10^^(abs(ISCALE)) using a rounding mode which is a	#
-#		function of the original rounding mode and the signs	#
-#		of ISCALE and X.  A table is given in the code.		#
-#									#
-#	A8.	Clr INEX; Force RZ.					#
-#		The operation in A3 above may have set INEX2.		#
-#		RZ mode is forced for the scaling operation to insure	#
-#		only one rounding error.  The grs bits are collected in #
-#		the INEX flag for use in A10.				#
-#									#
-#	A9.	Scale X -> Y.						#
-#		The mantissa is scaled to the desired number of		#
-#		significant digits.  The excess digits are collected	#
-#		in INEX2.						#
-#									#
-#	A10.	Or in INEX.						#
-#		If INEX is set, round error occurred.  This is		#
-#		compensated for by 'or-ing' in the INEX2 flag to	#
-#		the lsb of Y.						#
-#									#
-#	A11.	Restore original FPCR; set size ext.			#
-#		Perform FINT operation in the user's rounding mode.	#
-#		Keep the size to extended.				#
-#									#
-#	A12.	Calculate YINT = FINT(Y) according to user's rounding	#
-#		mode.  The FPSP routine sintd0 is used.  The output	#
-#		is in fp0.						#
-#									#
-#	A13.	Check for LEN digits.					#
-#		If the int operation results in more than LEN digits,	#
-#		or less than LEN -1 digits, adjust ILOG and repeat from	#
-#		A6.  This test occurs only on the first pass.  If the	#
-#		result is exactly 10^LEN, decrement ILOG and divide	#
-#		the mantissa by 10.					#
-#									#
-#	A14.	Convert the mantissa to bcd.				#
-#		The binstr routine is used to convert the LEN digit	#
-#		mantissa to bcd in memory.  The input to binstr is	#
-#		to be a fraction; i.e. (mantissa)/10^LEN and adjusted	#
-#		such that the decimal point is to the left of bit 63.	#
-#		The bcd digits are stored in the correct position in	#
-#		the final string area in memory.			#
-#									#
-#	A15.	Convert the exponent to bcd.				#
-#		As in A14 above, the exp is converted to bcd and the	#
-#		digits are stored in the final string.			#
-#		Test the length of the final exponent string.  If the	#
-#		length is 4, set operr.					#
-#									#
-#	A16.	Write sign bits to final string.			#
-#									#
-#########################################################################
-
-set	BINDEC_FLG,	EXC_TEMP	# DENORM flag
-
-# Constants in extended precision
-PLOG2:
-	long		0x3FFD0000,0x9A209A84,0xFBCFF798,0x00000000
-PLOG2UP1:
-	long		0x3FFD0000,0x9A209A84,0xFBCFF799,0x00000000
-
-# Constants in single precision
-FONE:
-	long		0x3F800000,0x00000000,0x00000000,0x00000000
-FTWO:
-	long		0x40000000,0x00000000,0x00000000,0x00000000
-FTEN:
-	long		0x41200000,0x00000000,0x00000000,0x00000000
-F4933:
-	long		0x459A2800,0x00000000,0x00000000,0x00000000
-
-RBDTBL:
-	byte		0,0,0,0
-	byte		3,3,2,2
-	byte		3,2,2,3
-	byte		2,3,3,2
-
-#	Implementation Notes:
-#
-#	The registers are used as follows:
-#
-#		d0: scratch; LEN input to binstr
-#		d1: scratch
-#		d2: upper 32-bits of mantissa for binstr
-#		d3: scratch;lower 32-bits of mantissa for binstr
-#		d4: LEN
-#		d5: LAMBDA/ICTR
-#		d6: ILOG
-#		d7: k-factor
-#		a0: ptr for original operand/final result
-#		a1: scratch pointer
-#		a2: pointer to FP_X; abs(original value) in ext
-#		fp0: scratch
-#		fp1: scratch
-#		fp2: scratch
-#		F_SCR1:
-#		F_SCR2:
-#		L_SCR1:
-#		L_SCR2:
-
-	global		bindec
-bindec:
-	movm.l		&0x3f20,-(%sp)	#  {%d2-%d7/%a2}
-	fmovm.x		&0x7,-(%sp)	#  {%fp0-%fp2}
-
-# A1. Set RM and size ext. Set SIGMA = sign input;
-#     The k-factor is saved for use in d7.  Clear BINDEC_FLG for
-#     separating  normalized/denormalized input.  If the input
-#     is a denormalized number, set the BINDEC_FLG memory word
-#     to signal denorm.  If the input is unnormalized, normalize
-#     the input and test for denormalized result.
-#
-	fmov.l		&rm_mode*0x10,%fpcr	# set RM and ext
-	mov.l		(%a0),L_SCR2(%a6)	# save exponent for sign check
-	mov.l		%d0,%d7		# move k-factor to d7
-
-	clr.b		BINDEC_FLG(%a6)	# clr norm/denorm flag
-	cmpi.b		STAG(%a6),&DENORM # is input a DENORM?
-	bne.w		A2_str		# no; input is a NORM
-
-#
-# Normalize the denorm
-#
-un_de_norm:
-	mov.w		(%a0),%d0
-	and.w		&0x7fff,%d0	# strip sign of normalized exp
-	mov.l		4(%a0),%d1
-	mov.l		8(%a0),%d2
-norm_loop:
-	sub.w		&1,%d0
-	lsl.l		&1,%d2
-	roxl.l		&1,%d1
-	tst.l		%d1
-	bge.b		norm_loop
-#
-# Test if the normalized input is denormalized
-#
-	tst.w		%d0
-	bgt.b		pos_exp		# if greater than zero, it is a norm
-	st		BINDEC_FLG(%a6)	# set flag for denorm
-pos_exp:
-	and.w		&0x7fff,%d0	# strip sign of normalized exp
-	mov.w		%d0,(%a0)
-	mov.l		%d1,4(%a0)
-	mov.l		%d2,8(%a0)
-
-# A2. Set X = abs(input).
-#
-A2_str:
-	mov.l		(%a0),FP_SCR1(%a6)	# move input to work space
-	mov.l		4(%a0),FP_SCR1+4(%a6)	# move input to work space
-	mov.l		8(%a0),FP_SCR1+8(%a6)	# move input to work space
-	and.l		&0x7fffffff,FP_SCR1(%a6)	# create abs(X)
-
-# A3. Compute ILOG.
-#     ILOG is the log base 10 of the input value.  It is approx-
-#     imated by adding e + 0.f when the original value is viewed
-#     as 2^^e * 1.f in extended precision.  This value is stored
-#     in d6.
-#
-# Register usage:
-#	Input/Output
-#	d0: k-factor/exponent
-#	d2: x/x
-#	d3: x/x
-#	d4: x/x
-#	d5: x/x
-#	d6: x/ILOG
-#	d7: k-factor/Unchanged
-#	a0: ptr for original operand/final result
-#	a1: x/x
-#	a2: x/x
-#	fp0: x/float(ILOG)
-#	fp1: x/x
-#	fp2: x/x
-#	F_SCR1:x/x
-#	F_SCR2:Abs(X)/Abs(X) with $3fff exponent
-#	L_SCR1:x/x
-#	L_SCR2:first word of X packed/Unchanged
-
-	tst.b		BINDEC_FLG(%a6)	# check for denorm
-	beq.b		A3_cont		# if clr, continue with norm
-	mov.l		&-4933,%d6	# force ILOG = -4933
-	bra.b		A4_str
-A3_cont:
-	mov.w		FP_SCR1(%a6),%d0	# move exp to d0
-	mov.w		&0x3fff,FP_SCR1(%a6)	# replace exponent with 0x3fff
-	fmov.x		FP_SCR1(%a6),%fp0	# now fp0 has 1.f
-	sub.w		&0x3fff,%d0	# strip off bias
-	fadd.w		%d0,%fp0	# add in exp
-	fsub.s		FONE(%pc),%fp0	# subtract off 1.0
-	fbge.w		pos_res		# if pos, branch
-	fmul.x		PLOG2UP1(%pc),%fp0	# if neg, mul by LOG2UP1
-	fmov.l		%fp0,%d6	# put ILOG in d6 as a lword
-	bra.b		A4_str		# go move out ILOG
-pos_res:
-	fmul.x		PLOG2(%pc),%fp0	# if pos, mul by LOG2
-	fmov.l		%fp0,%d6	# put ILOG in d6 as a lword
-
-
-# A4. Clr INEX bit.
-#     The operation in A3 above may have set INEX2.
-
-A4_str:
-	fmov.l		&0,%fpsr	# zero all of fpsr - nothing needed
-
-
-# A5. Set ICTR = 0;
-#     ICTR is a flag used in A13.  It must be set before the
-#     loop entry A6. The lower word of d5 is used for ICTR.
-
-	clr.w		%d5		# clear ICTR
-
-# A6. Calculate LEN.
-#     LEN is the number of digits to be displayed.  The k-factor
-#     can dictate either the total number of digits, if it is
-#     a positive number, or the number of digits after the
-#     original decimal point which are to be included as
-#     significant.  See the 68882 manual for examples.
-#     If LEN is computed to be greater than 17, set OPERR in
-#     USER_FPSR.  LEN is stored in d4.
-#
-# Register usage:
-#	Input/Output
-#	d0: exponent/Unchanged
-#	d2: x/x/scratch
-#	d3: x/x
-#	d4: exc picture/LEN
-#	d5: ICTR/Unchanged
-#	d6: ILOG/Unchanged
-#	d7: k-factor/Unchanged
-#	a0: ptr for original operand/final result
-#	a1: x/x
-#	a2: x/x
-#	fp0: float(ILOG)/Unchanged
-#	fp1: x/x
-#	fp2: x/x
-#	F_SCR1:x/x
-#	F_SCR2:Abs(X) with $3fff exponent/Unchanged
-#	L_SCR1:x/x
-#	L_SCR2:first word of X packed/Unchanged
-
-A6_str:
-	tst.l		%d7		# branch on sign of k
-	ble.b		k_neg		# if k <= 0, LEN = ILOG + 1 - k
-	mov.l		%d7,%d4		# if k > 0, LEN = k
-	bra.b		len_ck		# skip to LEN check
-k_neg:
-	mov.l		%d6,%d4		# first load ILOG to d4
-	sub.l		%d7,%d4		# subtract off k
-	addq.l		&1,%d4		# add in the 1
-len_ck:
-	tst.l		%d4		# LEN check: branch on sign of LEN
-	ble.b		LEN_ng		# if neg, set LEN = 1
-	cmp.l		%d4,&17		# test if LEN > 17
-	ble.b		A7_str		# if not, forget it
-	mov.l		&17,%d4		# set max LEN = 17
-	tst.l		%d7		# if negative, never set OPERR
-	ble.b		A7_str		# if positive, continue
-	or.l		&opaop_mask,USER_FPSR(%a6)	# set OPERR & AIOP in USER_FPSR
-	bra.b		A7_str		# finished here
-LEN_ng:
-	mov.l		&1,%d4		# min LEN is 1
-
-
-# A7. Calculate SCALE.
-#     SCALE is equal to 10^ISCALE, where ISCALE is the number
-#     of decimal places needed to insure LEN integer digits
-#     in the output before conversion to bcd. LAMBDA is the sign
-#     of ISCALE, used in A9.  Fp1 contains 10^^(abs(ISCALE)) using
-#     the rounding mode as given in the following table (see
-#     Coonen, p. 7.23 as ref.; however, the SCALE variable is
-#     of opposite sign in bindec.sa from Coonen).
-#
-#	Initial					USE
-#	FPCR[6:5]	LAMBDA	SIGN(X)		FPCR[6:5]
-#	----------------------------------------------
-#	 RN	00	   0	   0		00/0	RN
-#	 RN	00	   0	   1		00/0	RN
-#	 RN	00	   1	   0		00/0	RN
-#	 RN	00	   1	   1		00/0	RN
-#	 RZ	01	   0	   0		11/3	RP
-#	 RZ	01	   0	   1		11/3	RP
-#	 RZ	01	   1	   0		10/2	RM
-#	 RZ	01	   1	   1		10/2	RM
-#	 RM	10	   0	   0		11/3	RP
-#	 RM	10	   0	   1		10/2	RM
-#	 RM	10	   1	   0		10/2	RM
-#	 RM	10	   1	   1		11/3	RP
-#	 RP	11	   0	   0		10/2	RM
-#	 RP	11	   0	   1		11/3	RP
-#	 RP	11	   1	   0		11/3	RP
-#	 RP	11	   1	   1		10/2	RM
-#
-# Register usage:
-#	Input/Output
-#	d0: exponent/scratch - final is 0
-#	d2: x/0 or 24 for A9
-#	d3: x/scratch - offset ptr into PTENRM array
-#	d4: LEN/Unchanged
-#	d5: 0/ICTR:LAMBDA
-#	d6: ILOG/ILOG or k if ((k<=0)&(ILOG<k))
-#	d7: k-factor/Unchanged
-#	a0: ptr for original operand/final result
-#	a1: x/ptr to PTENRM array
-#	a2: x/x
-#	fp0: float(ILOG)/Unchanged
-#	fp1: x/10^ISCALE
-#	fp2: x/x
-#	F_SCR1:x/x
-#	F_SCR2:Abs(X) with $3fff exponent/Unchanged
-#	L_SCR1:x/x
-#	L_SCR2:first word of X packed/Unchanged
-
-A7_str:
-	tst.l		%d7		# test sign of k
-	bgt.b		k_pos		# if pos and > 0, skip this
-	cmp.l		%d7,%d6		# test k - ILOG
-	blt.b		k_pos		# if ILOG >= k, skip this
-	mov.l		%d7,%d6		# if ((k<0) & (ILOG < k)) ILOG = k
-k_pos:
-	mov.l		%d6,%d0		# calc ILOG + 1 - LEN in d0
-	addq.l		&1,%d0		# add the 1
-	sub.l		%d4,%d0		# sub off LEN
-	swap		%d5		# use upper word of d5 for LAMBDA
-	clr.w		%d5		# set it zero initially
-	clr.w		%d2		# set up d2 for very small case
-	tst.l		%d0		# test sign of ISCALE
-	bge.b		iscale		# if pos, skip next inst
-	addq.w		&1,%d5		# if neg, set LAMBDA true
-	cmp.l		%d0,&0xffffecd4	# test iscale <= -4908
-	bgt.b		no_inf		# if false, skip rest
-	add.l		&24,%d0		# add in 24 to iscale
-	mov.l		&24,%d2		# put 24 in d2 for A9
-no_inf:
-	neg.l		%d0		# and take abs of ISCALE
-iscale:
-	fmov.s		FONE(%pc),%fp1	# init fp1 to 1
-	bfextu		USER_FPCR(%a6){&26:&2},%d1	# get initial rmode bits
-	lsl.w		&1,%d1		# put them in bits 2:1
-	add.w		%d5,%d1		# add in LAMBDA
-	lsl.w		&1,%d1		# put them in bits 3:1
-	tst.l		L_SCR2(%a6)	# test sign of original x
-	bge.b		x_pos		# if pos, don't set bit 0
-	addq.l		&1,%d1		# if neg, set bit 0
-x_pos:
-	lea.l		RBDTBL(%pc),%a2	# load rbdtbl base
-	mov.b		(%a2,%d1),%d3	# load d3 with new rmode
-	lsl.l		&4,%d3		# put bits in proper position
-	fmov.l		%d3,%fpcr	# load bits into fpu
-	lsr.l		&4,%d3		# put bits in proper position
-	tst.b		%d3		# decode new rmode for pten table
-	bne.b		not_rn		# if zero, it is RN
-	lea.l		PTENRN(%pc),%a1	# load a1 with RN table base
-	bra.b		rmode		# exit decode
-not_rn:
-	lsr.b		&1,%d3		# get lsb in carry
-	bcc.b		not_rp2		# if carry clear, it is RM
-	lea.l		PTENRP(%pc),%a1	# load a1 with RP table base
-	bra.b		rmode		# exit decode
-not_rp2:
-	lea.l		PTENRM(%pc),%a1	# load a1 with RM table base
-rmode:
-	clr.l		%d3		# clr table index
-e_loop2:
-	lsr.l		&1,%d0		# shift next bit into carry
-	bcc.b		e_next2		# if zero, skip the mul
-	fmul.x		(%a1,%d3),%fp1	# mul by 10**(d3_bit_no)
-e_next2:
-	add.l		&12,%d3		# inc d3 to next pwrten table entry
-	tst.l		%d0		# test if ISCALE is zero
-	bne.b		e_loop2		# if not, loop
-
-# A8. Clr INEX; Force RZ.
-#     The operation in A3 above may have set INEX2.
-#     RZ mode is forced for the scaling operation to insure
-#     only one rounding error.  The grs bits are collected in
-#     the INEX flag for use in A10.
-#
-# Register usage:
-#	Input/Output
-
-	fmov.l		&0,%fpsr	# clr INEX
-	fmov.l		&rz_mode*0x10,%fpcr	# set RZ rounding mode
-
-# A9. Scale X -> Y.
-#     The mantissa is scaled to the desired number of significant
-#     digits.  The excess digits are collected in INEX2. If mul,
-#     Check d2 for excess 10 exponential value.  If not zero,
-#     the iscale value would have caused the pwrten calculation
-#     to overflow.  Only a negative iscale can cause this, so
-#     multiply by 10^(d2), which is now only allowed to be 24,
-#     with a multiply by 10^8 and 10^16, which is exact since
-#     10^24 is exact.  If the input was denormalized, we must
-#     create a busy stack frame with the mul command and the
-#     two operands, and allow the fpu to complete the multiply.
-#
-# Register usage:
-#	Input/Output
-#	d0: FPCR with RZ mode/Unchanged
-#	d2: 0 or 24/unchanged
-#	d3: x/x
-#	d4: LEN/Unchanged
-#	d5: ICTR:LAMBDA
-#	d6: ILOG/Unchanged
-#	d7: k-factor/Unchanged
-#	a0: ptr for original operand/final result
-#	a1: ptr to PTENRM array/Unchanged
-#	a2: x/x
-#	fp0: float(ILOG)/X adjusted for SCALE (Y)
-#	fp1: 10^ISCALE/Unchanged
-#	fp2: x/x
-#	F_SCR1:x/x
-#	F_SCR2:Abs(X) with $3fff exponent/Unchanged
-#	L_SCR1:x/x
-#	L_SCR2:first word of X packed/Unchanged
-
-A9_str:
-	fmov.x		(%a0),%fp0	# load X from memory
-	fabs.x		%fp0		# use abs(X)
-	tst.w		%d5		# LAMBDA is in lower word of d5
-	bne.b		sc_mul		# if neg (LAMBDA = 1), scale by mul
-	fdiv.x		%fp1,%fp0	# calculate X / SCALE -> Y to fp0
-	bra.w		A10_st		# branch to A10
-
-sc_mul:
-	tst.b		BINDEC_FLG(%a6)	# check for denorm
-	beq.w		A9_norm		# if norm, continue with mul
-
-# for DENORM, we must calculate:
-#	fp0 = input_op * 10^ISCALE * 10^24
-# since the input operand is a DENORM, we can't multiply it directly.
-# so, we do the multiplication of the exponents and mantissas separately.
-# in this way, we avoid underflow on intermediate stages of the
-# multiplication and guarantee a result without exception.
-	fmovm.x		&0x2,-(%sp)	# save 10^ISCALE to stack
-
-	mov.w		(%sp),%d3	# grab exponent
-	andi.w		&0x7fff,%d3	# clear sign
-	ori.w		&0x8000,(%a0)	# make DENORM exp negative
-	add.w		(%a0),%d3	# add DENORM exp to 10^ISCALE exp
-	subi.w		&0x3fff,%d3	# subtract BIAS
-	add.w		36(%a1),%d3
-	subi.w		&0x3fff,%d3	# subtract BIAS
-	add.w		48(%a1),%d3
-	subi.w		&0x3fff,%d3	# subtract BIAS
-
-	bmi.w		sc_mul_err	# is result is DENORM, punt!!!
-
-	andi.w		&0x8000,(%sp)	# keep sign
-	or.w		%d3,(%sp)	# insert new exponent
-	andi.w		&0x7fff,(%a0)	# clear sign bit on DENORM again
-	mov.l		0x8(%a0),-(%sp) # put input op mantissa on stk
-	mov.l		0x4(%a0),-(%sp)
-	mov.l		&0x3fff0000,-(%sp) # force exp to zero
-	fmovm.x		(%sp)+,&0x80	# load normalized DENORM into fp0
-	fmul.x		(%sp)+,%fp0
-
-#	fmul.x	36(%a1),%fp0	# multiply fp0 by 10^8
-#	fmul.x	48(%a1),%fp0	# multiply fp0 by 10^16
-	mov.l		36+8(%a1),-(%sp) # get 10^8 mantissa
-	mov.l		36+4(%a1),-(%sp)
-	mov.l		&0x3fff0000,-(%sp) # force exp to zero
-	mov.l		48+8(%a1),-(%sp) # get 10^16 mantissa
-	mov.l		48+4(%a1),-(%sp)
-	mov.l		&0x3fff0000,-(%sp)# force exp to zero
-	fmul.x		(%sp)+,%fp0	# multiply fp0 by 10^8
-	fmul.x		(%sp)+,%fp0	# multiply fp0 by 10^16
-	bra.b		A10_st
-
-sc_mul_err:
-	bra.b		sc_mul_err
-
-A9_norm:
-	tst.w		%d2		# test for small exp case
-	beq.b		A9_con		# if zero, continue as normal
-	fmul.x		36(%a1),%fp0	# multiply fp0 by 10^8
-	fmul.x		48(%a1),%fp0	# multiply fp0 by 10^16
-A9_con:
-	fmul.x		%fp1,%fp0	# calculate X * SCALE -> Y to fp0
-
-# A10. Or in INEX.
-#      If INEX is set, round error occurred.  This is compensated
-#      for by 'or-ing' in the INEX2 flag to the lsb of Y.
-#
-# Register usage:
-#	Input/Output
-#	d0: FPCR with RZ mode/FPSR with INEX2 isolated
-#	d2: x/x
-#	d3: x/x
-#	d4: LEN/Unchanged
-#	d5: ICTR:LAMBDA
-#	d6: ILOG/Unchanged
-#	d7: k-factor/Unchanged
-#	a0: ptr for original operand/final result
-#	a1: ptr to PTENxx array/Unchanged
-#	a2: x/ptr to FP_SCR1(a6)
-#	fp0: Y/Y with lsb adjusted
-#	fp1: 10^ISCALE/Unchanged
-#	fp2: x/x
-
-A10_st:
-	fmov.l		%fpsr,%d0	# get FPSR
-	fmov.x		%fp0,FP_SCR1(%a6)	# move Y to memory
-	lea.l		FP_SCR1(%a6),%a2	# load a2 with ptr to FP_SCR1
-	btst		&9,%d0		# check if INEX2 set
-	beq.b		A11_st		# if clear, skip rest
-	or.l		&1,8(%a2)	# or in 1 to lsb of mantissa
-	fmov.x		FP_SCR1(%a6),%fp0	# write adjusted Y back to fpu
-
-
-# A11. Restore original FPCR; set size ext.
-#      Perform FINT operation in the user's rounding mode.  Keep
-#      the size to extended.  The sintdo entry point in the sint
-#      routine expects the FPCR value to be in USER_FPCR for
-#      mode and precision.  The original FPCR is saved in L_SCR1.
-
-A11_st:
-	mov.l		USER_FPCR(%a6),L_SCR1(%a6)	# save it for later
-	and.l		&0x00000030,USER_FPCR(%a6)	# set size to ext,
-#					;block exceptions
-
-
-# A12. Calculate YINT = FINT(Y) according to user's rounding mode.
-#      The FPSP routine sintd0 is used.  The output is in fp0.
-#
-# Register usage:
-#	Input/Output
-#	d0: FPSR with AINEX cleared/FPCR with size set to ext
-#	d2: x/x/scratch
-#	d3: x/x
-#	d4: LEN/Unchanged
-#	d5: ICTR:LAMBDA/Unchanged
-#	d6: ILOG/Unchanged
-#	d7: k-factor/Unchanged
-#	a0: ptr for original operand/src ptr for sintdo
-#	a1: ptr to PTENxx array/Unchanged
-#	a2: ptr to FP_SCR1(a6)/Unchanged
-#	a6: temp pointer to FP_SCR1(a6) - orig value saved and restored
-#	fp0: Y/YINT
-#	fp1: 10^ISCALE/Unchanged
-#	fp2: x/x
-#	F_SCR1:x/x
-#	F_SCR2:Y adjusted for inex/Y with original exponent
-#	L_SCR1:x/original USER_FPCR
-#	L_SCR2:first word of X packed/Unchanged
-
-A12_st:
-	movm.l	&0xc0c0,-(%sp)	# save regs used by sintd0	 {%d0-%d1/%a0-%a1}
-	mov.l	L_SCR1(%a6),-(%sp)
-	mov.l	L_SCR2(%a6),-(%sp)
-
-	lea.l		FP_SCR1(%a6),%a0	# a0 is ptr to FP_SCR1(a6)
-	fmov.x		%fp0,(%a0)	# move Y to memory at FP_SCR1(a6)
-	tst.l		L_SCR2(%a6)	# test sign of original operand
-	bge.b		do_fint12		# if pos, use Y
-	or.l		&0x80000000,(%a0)	# if neg, use -Y
-do_fint12:
-	mov.l	USER_FPSR(%a6),-(%sp)
-#	bsr	sintdo		# sint routine returns int in fp0
-
-	fmov.l	USER_FPCR(%a6),%fpcr
-	fmov.l	&0x0,%fpsr			# clear the AEXC bits!!!
-##	mov.l		USER_FPCR(%a6),%d0	# ext prec/keep rnd mode
-##	andi.l		&0x00000030,%d0
-##	fmov.l		%d0,%fpcr
-	fint.x		FP_SCR1(%a6),%fp0	# do fint()
-	fmov.l	%fpsr,%d0
-	or.w	%d0,FPSR_EXCEPT(%a6)
-##	fmov.l		&0x0,%fpcr
-##	fmov.l		%fpsr,%d0		# don't keep ccodes
-##	or.w		%d0,FPSR_EXCEPT(%a6)
-
-	mov.b	(%sp),USER_FPSR(%a6)
-	add.l	&4,%sp
-
-	mov.l	(%sp)+,L_SCR2(%a6)
-	mov.l	(%sp)+,L_SCR1(%a6)
-	movm.l	(%sp)+,&0x303	# restore regs used by sint	 {%d0-%d1/%a0-%a1}
-
-	mov.l	L_SCR2(%a6),FP_SCR1(%a6)	# restore original exponent
-	mov.l	L_SCR1(%a6),USER_FPCR(%a6)	# restore user's FPCR
-
-# A13. Check for LEN digits.
-#      If the int operation results in more than LEN digits,
-#      or less than LEN -1 digits, adjust ILOG and repeat from
-#      A6.  This test occurs only on the first pass.  If the
-#      result is exactly 10^LEN, decrement ILOG and divide
-#      the mantissa by 10.  The calculation of 10^LEN cannot
-#      be inexact, since all powers of ten up to 10^27 are exact
-#      in extended precision, so the use of a previous power-of-ten
-#      table will introduce no error.
-#
-#
-# Register usage:
-#	Input/Output
-#	d0: FPCR with size set to ext/scratch final = 0
-#	d2: x/x
-#	d3: x/scratch final = x
-#	d4: LEN/LEN adjusted
-#	d5: ICTR:LAMBDA/LAMBDA:ICTR
-#	d6: ILOG/ILOG adjusted
-#	d7: k-factor/Unchanged
-#	a0: pointer into memory for packed bcd string formation
-#	a1: ptr to PTENxx array/Unchanged
-#	a2: ptr to FP_SCR1(a6)/Unchanged
-#	fp0: int portion of Y/abs(YINT) adjusted
-#	fp1: 10^ISCALE/Unchanged
-#	fp2: x/10^LEN
-#	F_SCR1:x/x
-#	F_SCR2:Y with original exponent/Unchanged
-#	L_SCR1:original USER_FPCR/Unchanged
-#	L_SCR2:first word of X packed/Unchanged
-
-A13_st:
-	swap		%d5		# put ICTR in lower word of d5
-	tst.w		%d5		# check if ICTR = 0
-	bne		not_zr		# if non-zero, go to second test
-#
-# Compute 10^(LEN-1)
-#
-	fmov.s		FONE(%pc),%fp2	# init fp2 to 1.0
-	mov.l		%d4,%d0		# put LEN in d0
-	subq.l		&1,%d0		# d0 = LEN -1
-	clr.l		%d3		# clr table index
-l_loop:
-	lsr.l		&1,%d0		# shift next bit into carry
-	bcc.b		l_next		# if zero, skip the mul
-	fmul.x		(%a1,%d3),%fp2	# mul by 10**(d3_bit_no)
-l_next:
-	add.l		&12,%d3		# inc d3 to next pwrten table entry
-	tst.l		%d0		# test if LEN is zero
-	bne.b		l_loop		# if not, loop
-#
-# 10^LEN-1 is computed for this test and A14.  If the input was
-# denormalized, check only the case in which YINT > 10^LEN.
-#
-	tst.b		BINDEC_FLG(%a6)	# check if input was norm
-	beq.b		A13_con		# if norm, continue with checking
-	fabs.x		%fp0		# take abs of YINT
-	bra		test_2
-#
-# Compare abs(YINT) to 10^(LEN-1) and 10^LEN
-#
-A13_con:
-	fabs.x		%fp0		# take abs of YINT
-	fcmp.x		%fp0,%fp2	# compare abs(YINT) with 10^(LEN-1)
-	fbge.w		test_2		# if greater, do next test
-	subq.l		&1,%d6		# subtract 1 from ILOG
-	mov.w		&1,%d5		# set ICTR
-	fmov.l		&rm_mode*0x10,%fpcr	# set rmode to RM
-	fmul.s		FTEN(%pc),%fp2	# compute 10^LEN
-	bra.w		A6_str		# return to A6 and recompute YINT
-test_2:
-	fmul.s		FTEN(%pc),%fp2	# compute 10^LEN
-	fcmp.x		%fp0,%fp2	# compare abs(YINT) with 10^LEN
-	fblt.w		A14_st		# if less, all is ok, go to A14
-	fbgt.w		fix_ex		# if greater, fix and redo
-	fdiv.s		FTEN(%pc),%fp0	# if equal, divide by 10
-	addq.l		&1,%d6		# and inc ILOG
-	bra.b		A14_st		# and continue elsewhere
-fix_ex:
-	addq.l		&1,%d6		# increment ILOG by 1
-	mov.w		&1,%d5		# set ICTR
-	fmov.l		&rm_mode*0x10,%fpcr	# set rmode to RM
-	bra.w		A6_str		# return to A6 and recompute YINT
-#
-# Since ICTR <> 0, we have already been through one adjustment,
-# and shouldn't have another; this is to check if abs(YINT) = 10^LEN
-# 10^LEN is again computed using whatever table is in a1 since the
-# value calculated cannot be inexact.
-#
-not_zr:
-	fmov.s		FONE(%pc),%fp2	# init fp2 to 1.0
-	mov.l		%d4,%d0		# put LEN in d0
-	clr.l		%d3		# clr table index
-z_loop:
-	lsr.l		&1,%d0		# shift next bit into carry
-	bcc.b		z_next		# if zero, skip the mul
-	fmul.x		(%a1,%d3),%fp2	# mul by 10**(d3_bit_no)
-z_next:
-	add.l		&12,%d3		# inc d3 to next pwrten table entry
-	tst.l		%d0		# test if LEN is zero
-	bne.b		z_loop		# if not, loop
-	fabs.x		%fp0		# get abs(YINT)
-	fcmp.x		%fp0,%fp2	# check if abs(YINT) = 10^LEN
-	fbneq.w		A14_st		# if not, skip this
-	fdiv.s		FTEN(%pc),%fp0	# divide abs(YINT) by 10
-	addq.l		&1,%d6		# and inc ILOG by 1
-	addq.l		&1,%d4		# and inc LEN
-	fmul.s		FTEN(%pc),%fp2	# if LEN++, the get 10^^LEN
-
-# A14. Convert the mantissa to bcd.
-#      The binstr routine is used to convert the LEN digit
-#      mantissa to bcd in memory.  The input to binstr is
-#      to be a fraction; i.e. (mantissa)/10^LEN and adjusted
-#      such that the decimal point is to the left of bit 63.
-#      The bcd digits are stored in the correct position in
-#      the final string area in memory.
-#
-#
-# Register usage:
-#	Input/Output
-#	d0: x/LEN call to binstr - final is 0
-#	d1: x/0
-#	d2: x/ms 32-bits of mant of abs(YINT)
-#	d3: x/ls 32-bits of mant of abs(YINT)
-#	d4: LEN/Unchanged
-#	d5: ICTR:LAMBDA/LAMBDA:ICTR
-#	d6: ILOG
-#	d7: k-factor/Unchanged
-#	a0: pointer into memory for packed bcd string formation
-#	    /ptr to first mantissa byte in result string
-#	a1: ptr to PTENxx array/Unchanged
-#	a2: ptr to FP_SCR1(a6)/Unchanged
-#	fp0: int portion of Y/abs(YINT) adjusted
-#	fp1: 10^ISCALE/Unchanged
-#	fp2: 10^LEN/Unchanged
-#	F_SCR1:x/Work area for final result
-#	F_SCR2:Y with original exponent/Unchanged
-#	L_SCR1:original USER_FPCR/Unchanged
-#	L_SCR2:first word of X packed/Unchanged
-
-A14_st:
-	fmov.l		&rz_mode*0x10,%fpcr	# force rz for conversion
-	fdiv.x		%fp2,%fp0	# divide abs(YINT) by 10^LEN
-	lea.l		FP_SCR0(%a6),%a0
-	fmov.x		%fp0,(%a0)	# move abs(YINT)/10^LEN to memory
-	mov.l		4(%a0),%d2	# move 2nd word of FP_RES to d2
-	mov.l		8(%a0),%d3	# move 3rd word of FP_RES to d3
-	clr.l		4(%a0)		# zero word 2 of FP_RES
-	clr.l		8(%a0)		# zero word 3 of FP_RES
-	mov.l		(%a0),%d0	# move exponent to d0
-	swap		%d0		# put exponent in lower word
-	beq.b		no_sft		# if zero, don't shift
-	sub.l		&0x3ffd,%d0	# sub bias less 2 to make fract
-	tst.l		%d0		# check if > 1
-	bgt.b		no_sft		# if so, don't shift
-	neg.l		%d0		# make exp positive
-m_loop:
-	lsr.l		&1,%d2		# shift d2:d3 right, add 0s
-	roxr.l		&1,%d3		# the number of places
-	dbf.w		%d0,m_loop	# given in d0
-no_sft:
-	tst.l		%d2		# check for mantissa of zero
-	bne.b		no_zr		# if not, go on
-	tst.l		%d3		# continue zero check
-	beq.b		zer_m		# if zero, go directly to binstr
-no_zr:
-	clr.l		%d1		# put zero in d1 for addx
-	add.l		&0x00000080,%d3	# inc at bit 7
-	addx.l		%d1,%d2		# continue inc
-	and.l		&0xffffff80,%d3	# strip off lsb not used by 882
-zer_m:
-	mov.l		%d4,%d0		# put LEN in d0 for binstr call
-	addq.l		&3,%a0		# a0 points to M16 byte in result
-	bsr		binstr		# call binstr to convert mant
-
-
-# A15. Convert the exponent to bcd.
-#      As in A14 above, the exp is converted to bcd and the
-#      digits are stored in the final string.
-#
-#      Digits are stored in L_SCR1(a6) on return from BINDEC as:
-#
-#	 32               16 15                0
-#	-----------------------------------------
-#	|  0 | e3 | e2 | e1 | e4 |  X |  X |  X |
-#	-----------------------------------------
-#
-# And are moved into their proper places in FP_SCR0.  If digit e4
-# is non-zero, OPERR is signaled.  In all cases, all 4 digits are
-# written as specified in the 881/882 manual for packed decimal.
-#
-# Register usage:
-#	Input/Output
-#	d0: x/LEN call to binstr - final is 0
-#	d1: x/scratch (0);shift count for final exponent packing
-#	d2: x/ms 32-bits of exp fraction/scratch
-#	d3: x/ls 32-bits of exp fraction
-#	d4: LEN/Unchanged
-#	d5: ICTR:LAMBDA/LAMBDA:ICTR
-#	d6: ILOG
-#	d7: k-factor/Unchanged
-#	a0: ptr to result string/ptr to L_SCR1(a6)
-#	a1: ptr to PTENxx array/Unchanged
-#	a2: ptr to FP_SCR1(a6)/Unchanged
-#	fp0: abs(YINT) adjusted/float(ILOG)
-#	fp1: 10^ISCALE/Unchanged
-#	fp2: 10^LEN/Unchanged
-#	F_SCR1:Work area for final result/BCD result
-#	F_SCR2:Y with original exponent/ILOG/10^4
-#	L_SCR1:original USER_FPCR/Exponent digits on return from binstr
-#	L_SCR2:first word of X packed/Unchanged
-
-A15_st:
-	tst.b		BINDEC_FLG(%a6)	# check for denorm
-	beq.b		not_denorm
-	ftest.x		%fp0		# test for zero
-	fbeq.w		den_zero	# if zero, use k-factor or 4933
-	fmov.l		%d6,%fp0	# float ILOG
-	fabs.x		%fp0		# get abs of ILOG
-	bra.b		convrt
-den_zero:
-	tst.l		%d7		# check sign of the k-factor
-	blt.b		use_ilog	# if negative, use ILOG
-	fmov.s		F4933(%pc),%fp0	# force exponent to 4933
-	bra.b		convrt		# do it
-use_ilog:
-	fmov.l		%d6,%fp0	# float ILOG
-	fabs.x		%fp0		# get abs of ILOG
-	bra.b		convrt
-not_denorm:
-	ftest.x		%fp0		# test for zero
-	fbneq.w		not_zero	# if zero, force exponent
-	fmov.s		FONE(%pc),%fp0	# force exponent to 1
-	bra.b		convrt		# do it
-not_zero:
-	fmov.l		%d6,%fp0	# float ILOG
-	fabs.x		%fp0		# get abs of ILOG
-convrt:
-	fdiv.x		24(%a1),%fp0	# compute ILOG/10^4
-	fmov.x		%fp0,FP_SCR1(%a6)	# store fp0 in memory
-	mov.l		4(%a2),%d2	# move word 2 to d2
-	mov.l		8(%a2),%d3	# move word 3 to d3
-	mov.w		(%a2),%d0	# move exp to d0
-	beq.b		x_loop_fin	# if zero, skip the shift
-	sub.w		&0x3ffd,%d0	# subtract off bias
-	neg.w		%d0		# make exp positive
-x_loop:
-	lsr.l		&1,%d2		# shift d2:d3 right
-	roxr.l		&1,%d3		# the number of places
-	dbf.w		%d0,x_loop	# given in d0
-x_loop_fin:
-	clr.l		%d1		# put zero in d1 for addx
-	add.l		&0x00000080,%d3	# inc at bit 6
-	addx.l		%d1,%d2		# continue inc
-	and.l		&0xffffff80,%d3	# strip off lsb not used by 882
-	mov.l		&4,%d0		# put 4 in d0 for binstr call
-	lea.l		L_SCR1(%a6),%a0	# a0 is ptr to L_SCR1 for exp digits
-	bsr		binstr		# call binstr to convert exp
-	mov.l		L_SCR1(%a6),%d0	# load L_SCR1 lword to d0
-	mov.l		&12,%d1		# use d1 for shift count
-	lsr.l		%d1,%d0		# shift d0 right by 12
-	bfins		%d0,FP_SCR0(%a6){&4:&12}	# put e3:e2:e1 in FP_SCR0
-	lsr.l		%d1,%d0		# shift d0 right by 12
-	bfins		%d0,FP_SCR0(%a6){&16:&4}	# put e4 in FP_SCR0
-	tst.b		%d0		# check if e4 is zero
-	beq.b		A16_st		# if zero, skip rest
-	or.l		&opaop_mask,USER_FPSR(%a6)	# set OPERR & AIOP in USER_FPSR
-
-
-# A16. Write sign bits to final string.
-#	   Sigma is bit 31 of initial value; RHO is bit 31 of d6 (ILOG).
-#
-# Register usage:
-#	Input/Output
-#	d0: x/scratch - final is x
-#	d2: x/x
-#	d3: x/x
-#	d4: LEN/Unchanged
-#	d5: ICTR:LAMBDA/LAMBDA:ICTR
-#	d6: ILOG/ILOG adjusted
-#	d7: k-factor/Unchanged
-#	a0: ptr to L_SCR1(a6)/Unchanged
-#	a1: ptr to PTENxx array/Unchanged
-#	a2: ptr to FP_SCR1(a6)/Unchanged
-#	fp0: float(ILOG)/Unchanged
-#	fp1: 10^ISCALE/Unchanged
-#	fp2: 10^LEN/Unchanged
-#	F_SCR1:BCD result with correct signs
-#	F_SCR2:ILOG/10^4
-#	L_SCR1:Exponent digits on return from binstr
-#	L_SCR2:first word of X packed/Unchanged
-
-A16_st:
-	clr.l		%d0		# clr d0 for collection of signs
-	and.b		&0x0f,FP_SCR0(%a6)	# clear first nibble of FP_SCR0
-	tst.l		L_SCR2(%a6)	# check sign of original mantissa
-	bge.b		mant_p		# if pos, don't set SM
-	mov.l		&2,%d0		# move 2 in to d0 for SM
-mant_p:
-	tst.l		%d6		# check sign of ILOG
-	bge.b		wr_sgn		# if pos, don't set SE
-	addq.l		&1,%d0		# set bit 0 in d0 for SE
-wr_sgn:
-	bfins		%d0,FP_SCR0(%a6){&0:&2}	# insert SM and SE into FP_SCR0
-
-# Clean up and restore all registers used.
-
-	fmov.l		&0,%fpsr	# clear possible inex2/ainex bits
-	fmovm.x		(%sp)+,&0xe0	#  {%fp0-%fp2}
-	movm.l		(%sp)+,&0x4fc	#  {%d2-%d7/%a2}
-	rts
-
-	global		PTENRN
-PTENRN:
-	long		0x40020000,0xA0000000,0x00000000	# 10 ^ 1
-	long		0x40050000,0xC8000000,0x00000000	# 10 ^ 2
-	long		0x400C0000,0x9C400000,0x00000000	# 10 ^ 4
-	long		0x40190000,0xBEBC2000,0x00000000	# 10 ^ 8
-	long		0x40340000,0x8E1BC9BF,0x04000000	# 10 ^ 16
-	long		0x40690000,0x9DC5ADA8,0x2B70B59E	# 10 ^ 32
-	long		0x40D30000,0xC2781F49,0xFFCFA6D5	# 10 ^ 64
-	long		0x41A80000,0x93BA47C9,0x80E98CE0	# 10 ^ 128
-	long		0x43510000,0xAA7EEBFB,0x9DF9DE8E	# 10 ^ 256
-	long		0x46A30000,0xE319A0AE,0xA60E91C7	# 10 ^ 512
-	long		0x4D480000,0xC9767586,0x81750C17	# 10 ^ 1024
-	long		0x5A920000,0x9E8B3B5D,0xC53D5DE5	# 10 ^ 2048
-	long		0x75250000,0xC4605202,0x8A20979B	# 10 ^ 4096
-
-	global		PTENRP
-PTENRP:
-	long		0x40020000,0xA0000000,0x00000000	# 10 ^ 1
-	long		0x40050000,0xC8000000,0x00000000	# 10 ^ 2
-	long		0x400C0000,0x9C400000,0x00000000	# 10 ^ 4
-	long		0x40190000,0xBEBC2000,0x00000000	# 10 ^ 8
-	long		0x40340000,0x8E1BC9BF,0x04000000	# 10 ^ 16
-	long		0x40690000,0x9DC5ADA8,0x2B70B59E	# 10 ^ 32
-	long		0x40D30000,0xC2781F49,0xFFCFA6D6	# 10 ^ 64
-	long		0x41A80000,0x93BA47C9,0x80E98CE0	# 10 ^ 128
-	long		0x43510000,0xAA7EEBFB,0x9DF9DE8E	# 10 ^ 256
-	long		0x46A30000,0xE319A0AE,0xA60E91C7	# 10 ^ 512
-	long		0x4D480000,0xC9767586,0x81750C18	# 10 ^ 1024
-	long		0x5A920000,0x9E8B3B5D,0xC53D5DE5	# 10 ^ 2048
-	long		0x75250000,0xC4605202,0x8A20979B	# 10 ^ 4096
-
-	global		PTENRM
-PTENRM:
-	long		0x40020000,0xA0000000,0x00000000	# 10 ^ 1
-	long		0x40050000,0xC8000000,0x00000000	# 10 ^ 2
-	long		0x400C0000,0x9C400000,0x00000000	# 10 ^ 4
-	long		0x40190000,0xBEBC2000,0x00000000	# 10 ^ 8
-	long		0x40340000,0x8E1BC9BF,0x04000000	# 10 ^ 16
-	long		0x40690000,0x9DC5ADA8,0x2B70B59D	# 10 ^ 32
-	long		0x40D30000,0xC2781F49,0xFFCFA6D5	# 10 ^ 64
-	long		0x41A80000,0x93BA47C9,0x80E98CDF	# 10 ^ 128
-	long		0x43510000,0xAA7EEBFB,0x9DF9DE8D	# 10 ^ 256
-	long		0x46A30000,0xE319A0AE,0xA60E91C6	# 10 ^ 512
-	long		0x4D480000,0xC9767586,0x81750C17	# 10 ^ 1024
-	long		0x5A920000,0x9E8B3B5D,0xC53D5DE4	# 10 ^ 2048
-	long		0x75250000,0xC4605202,0x8A20979A	# 10 ^ 4096
-
-#########################################################################
-# binstr(): Converts a 64-bit binary integer to bcd.			#
-#									#
-# INPUT *************************************************************** #
-#	d2:d3 = 64-bit binary integer					#
-#	d0    = desired length (LEN)					#
-#	a0    = pointer to start in memory for bcd characters		#
-#		(This pointer must point to byte 4 of the first		#
-#		 lword of the packed decimal memory string.)		#
-#									#
-# OUTPUT ************************************************************** #
-#	a0 = pointer to LEN bcd digits representing the 64-bit integer.	#
-#									#
-# ALGORITHM ***********************************************************	#
-#	The 64-bit binary is assumed to have a decimal point before	#
-#	bit 63.  The fraction is multiplied by 10 using a mul by 2	#
-#	shift and a mul by 8 shift.  The bits shifted out of the	#
-#	msb form a decimal digit.  This process is iterated until	#
-#	LEN digits are formed.						#
-#									#
-# A1. Init d7 to 1.  D7 is the byte digit counter, and if 1, the	#
-#     digit formed will be assumed the least significant.  This is	#
-#     to force the first byte formed to have a 0 in the upper 4 bits.	#
-#									#
-# A2. Beginning of the loop:						#
-#     Copy the fraction in d2:d3 to d4:d5.				#
-#									#
-# A3. Multiply the fraction in d2:d3 by 8 using bit-field		#
-#     extracts and shifts.  The three msbs from d2 will go into d1.	#
-#									#
-# A4. Multiply the fraction in d4:d5 by 2 using shifts.  The msb	#
-#     will be collected by the carry.					#
-#									#
-# A5. Add using the carry the 64-bit quantities in d2:d3 and d4:d5	#
-#     into d2:d3.  D1 will contain the bcd digit formed.		#
-#									#
-# A6. Test d7.  If zero, the digit formed is the ms digit.  If non-	#
-#     zero, it is the ls digit.  Put the digit in its place in the	#
-#     upper word of d0.  If it is the ls digit, write the word		#
-#     from d0 to memory.						#
-#									#
-# A7. Decrement d6 (LEN counter) and repeat the loop until zero.	#
-#									#
-#########################################################################
-
-#	Implementation Notes:
-#
-#	The registers are used as follows:
-#
-#		d0: LEN counter
-#		d1: temp used to form the digit
-#		d2: upper 32-bits of fraction for mul by 8
-#		d3: lower 32-bits of fraction for mul by 8
-#		d4: upper 32-bits of fraction for mul by 2
-#		d5: lower 32-bits of fraction for mul by 2
-#		d6: temp for bit-field extracts
-#		d7: byte digit formation word;digit count {0,1}
-#		a0: pointer into memory for packed bcd string formation
-#
-
-	global		binstr
-binstr:
-	movm.l		&0xff00,-(%sp)	#  {%d0-%d7}
-
-#
-# A1: Init d7
-#
-	mov.l		&1,%d7		# init d7 for second digit
-	subq.l		&1,%d0		# for dbf d0 would have LEN+1 passes
-#
-# A2. Copy d2:d3 to d4:d5.  Start loop.
-#
-loop:
-	mov.l		%d2,%d4		# copy the fraction before muls
-	mov.l		%d3,%d5		# to d4:d5
-#
-# A3. Multiply d2:d3 by 8; extract msbs into d1.
-#
-	bfextu		%d2{&0:&3},%d1	# copy 3 msbs of d2 into d1
-	asl.l		&3,%d2		# shift d2 left by 3 places
-	bfextu		%d3{&0:&3},%d6	# copy 3 msbs of d3 into d6
-	asl.l		&3,%d3		# shift d3 left by 3 places
-	or.l		%d6,%d2		# or in msbs from d3 into d2
-#
-# A4. Multiply d4:d5 by 2; add carry out to d1.
-#
-	asl.l		&1,%d5		# mul d5 by 2
-	roxl.l		&1,%d4		# mul d4 by 2
-	swap		%d6		# put 0 in d6 lower word
-	addx.w		%d6,%d1		# add in extend from mul by 2
-#
-# A5. Add mul by 8 to mul by 2.  D1 contains the digit formed.
-#
-	add.l		%d5,%d3		# add lower 32 bits
-	nop				# ERRATA FIX #13 (Rev. 1.2 6/6/90)
-	addx.l		%d4,%d2		# add with extend upper 32 bits
-	nop				# ERRATA FIX #13 (Rev. 1.2 6/6/90)
-	addx.w		%d6,%d1		# add in extend from add to d1
-	swap		%d6		# with d6 = 0; put 0 in upper word
-#
-# A6. Test d7 and branch.
-#
-	tst.w		%d7		# if zero, store digit & to loop
-	beq.b		first_d		# if non-zero, form byte & write
-sec_d:
-	swap		%d7		# bring first digit to word d7b
-	asl.w		&4,%d7		# first digit in upper 4 bits d7b
-	add.w		%d1,%d7		# add in ls digit to d7b
-	mov.b		%d7,(%a0)+	# store d7b byte in memory
-	swap		%d7		# put LEN counter in word d7a
-	clr.w		%d7		# set d7a to signal no digits done
-	dbf.w		%d0,loop	# do loop some more!
-	bra.b		end_bstr	# finished, so exit
-first_d:
-	swap		%d7		# put digit word in d7b
-	mov.w		%d1,%d7		# put new digit in d7b
-	swap		%d7		# put LEN counter in word d7a
-	addq.w		&1,%d7		# set d7a to signal first digit done
-	dbf.w		%d0,loop	# do loop some more!
-	swap		%d7		# put last digit in string
-	lsl.w		&4,%d7		# move it to upper 4 bits
-	mov.b		%d7,(%a0)+	# store it in memory string
-#
-# Clean up and return with result in fp0.
-#
-end_bstr:
-	movm.l		(%sp)+,&0xff	#  {%d0-%d7}
-	rts
-
-#########################################################################
-# XDEF ****************************************************************	#
-#	facc_in_b(): dmem_read_byte failed				#
-#	facc_in_w(): dmem_read_word failed				#
-#	facc_in_l(): dmem_read_long failed				#
-#	facc_in_d(): dmem_read of dbl prec failed			#
-#	facc_in_x(): dmem_read of ext prec failed			#
-#									#
-#	facc_out_b(): dmem_write_byte failed				#
-#	facc_out_w(): dmem_write_word failed				#
-#	facc_out_l(): dmem_write_long failed				#
-#	facc_out_d(): dmem_write of dbl prec failed			#
-#	facc_out_x(): dmem_write of ext prec failed			#
-#									#
-# XREF ****************************************************************	#
-#	_real_access() - exit through access error handler		#
-#									#
-# INPUT ***************************************************************	#
-#	None								#
-#									#
-# OUTPUT **************************************************************	#
-#	None								#
-#									#
-# ALGORITHM ***********************************************************	#
-#	Flow jumps here when an FP data fetch call gets an error	#
-# result. This means the operating system wants an access error frame	#
-# made out of the current exception stack frame.			#
-#	So, we first call restore() which makes sure that any updated	#
-# -(an)+ register gets returned to its pre-exception value and then	#
-# we change the stack to an access error stack frame.			#
-#									#
-#########################################################################
-
-facc_in_b:
-	movq.l		&0x1,%d0			# one byte
-	bsr.w		restore				# fix An
-
-	mov.w		&0x0121,EXC_VOFF(%a6)		# set FSLW
-	bra.w		facc_finish
-
-facc_in_w:
-	movq.l		&0x2,%d0			# two bytes
-	bsr.w		restore				# fix An
-
-	mov.w		&0x0141,EXC_VOFF(%a6)		# set FSLW
-	bra.b		facc_finish
-
-facc_in_l:
-	movq.l		&0x4,%d0			# four bytes
-	bsr.w		restore				# fix An
-
-	mov.w		&0x0101,EXC_VOFF(%a6)		# set FSLW
-	bra.b		facc_finish
-
-facc_in_d:
-	movq.l		&0x8,%d0			# eight bytes
-	bsr.w		restore				# fix An
-
-	mov.w		&0x0161,EXC_VOFF(%a6)		# set FSLW
-	bra.b		facc_finish
-
-facc_in_x:
-	movq.l		&0xc,%d0			# twelve bytes
-	bsr.w		restore				# fix An
-
-	mov.w		&0x0161,EXC_VOFF(%a6)		# set FSLW
-	bra.b		facc_finish
-
-################################################################
-
-facc_out_b:
-	movq.l		&0x1,%d0			# one byte
-	bsr.w		restore				# restore An
-
-	mov.w		&0x00a1,EXC_VOFF(%a6)		# set FSLW
-	bra.b		facc_finish
-
-facc_out_w:
-	movq.l		&0x2,%d0			# two bytes
-	bsr.w		restore				# restore An
-
-	mov.w		&0x00c1,EXC_VOFF(%a6)		# set FSLW
-	bra.b		facc_finish
-
-facc_out_l:
-	movq.l		&0x4,%d0			# four bytes
-	bsr.w		restore				# restore An
-
-	mov.w		&0x0081,EXC_VOFF(%a6)		# set FSLW
-	bra.b		facc_finish
-
-facc_out_d:
-	movq.l		&0x8,%d0			# eight bytes
-	bsr.w		restore				# restore An
-
-	mov.w		&0x00e1,EXC_VOFF(%a6)		# set FSLW
-	bra.b		facc_finish
-
-facc_out_x:
-	mov.l		&0xc,%d0			# twelve bytes
-	bsr.w		restore				# restore An
-
-	mov.w		&0x00e1,EXC_VOFF(%a6)		# set FSLW
-
-# here's where we actually create the access error frame from the
-# current exception stack frame.
-facc_finish:
-	mov.l		USER_FPIAR(%a6),EXC_PC(%a6) # store current PC
-
-	fmovm.x		EXC_FPREGS(%a6),&0xc0	# restore fp0-fp1
-	fmovm.l		USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
-	movm.l		EXC_DREGS(%a6),&0x0303	# restore d0-d1/a0-a1
-
-	unlk		%a6
-
-	mov.l		(%sp),-(%sp)		# store SR, hi(PC)
-	mov.l		0x8(%sp),0x4(%sp)	# store lo(PC)
-	mov.l		0xc(%sp),0x8(%sp)	# store EA
-	mov.l		&0x00000001,0xc(%sp)	# store FSLW
-	mov.w		0x6(%sp),0xc(%sp)	# fix FSLW (size)
-	mov.w		&0x4008,0x6(%sp)	# store voff
-
-	btst		&0x5,(%sp)		# supervisor or user mode?
-	beq.b		facc_out2		# user
-	bset		&0x2,0xd(%sp)		# set supervisor TM bit
-
-facc_out2:
-	bra.l		_real_access
-
-##################################################################
-
-# if the effective addressing mode was predecrement or postincrement,
-# the emulation has already changed its value to the correct post-
-# instruction value. but since we're exiting to the access error
-# handler, then AN must be returned to its pre-instruction value.
-# we do that here.
-restore:
-	mov.b		EXC_OPWORD+0x1(%a6),%d1
-	andi.b		&0x38,%d1		# extract opmode
-	cmpi.b		%d1,&0x18		# postinc?
-	beq.w		rest_inc
-	cmpi.b		%d1,&0x20		# predec?
-	beq.w		rest_dec
-	rts
-
-rest_inc:
-	mov.b		EXC_OPWORD+0x1(%a6),%d1
-	andi.w		&0x0007,%d1		# fetch An
-
-	mov.w		(tbl_rest_inc.b,%pc,%d1.w*2),%d1
-	jmp		(tbl_rest_inc.b,%pc,%d1.w*1)
-
-tbl_rest_inc:
-	short		ri_a0 - tbl_rest_inc
-	short		ri_a1 - tbl_rest_inc
-	short		ri_a2 - tbl_rest_inc
-	short		ri_a3 - tbl_rest_inc
-	short		ri_a4 - tbl_rest_inc
-	short		ri_a5 - tbl_rest_inc
-	short		ri_a6 - tbl_rest_inc
-	short		ri_a7 - tbl_rest_inc
-
-ri_a0:
-	sub.l		%d0,EXC_DREGS+0x8(%a6)	# fix stacked a0
-	rts
-ri_a1:
-	sub.l		%d0,EXC_DREGS+0xc(%a6)	# fix stacked a1
-	rts
-ri_a2:
-	sub.l		%d0,%a2			# fix a2
-	rts
-ri_a3:
-	sub.l		%d0,%a3			# fix a3
-	rts
-ri_a4:
-	sub.l		%d0,%a4			# fix a4
-	rts
-ri_a5:
-	sub.l		%d0,%a5			# fix a5
-	rts
-ri_a6:
-	sub.l		%d0,(%a6)		# fix stacked a6
-	rts
-# if it's a fmove out instruction, we don't have to fix a7
-# because we hadn't changed it yet. if it's an opclass two
-# instruction (data moved in) and the exception was in supervisor
-# mode, then also also wasn't updated. if it was user mode, then
-# restore the correct a7 which is in the USP currently.
-ri_a7:
-	cmpi.b		EXC_VOFF(%a6),&0x30	# move in or out?
-	bne.b		ri_a7_done		# out
-
-	btst		&0x5,EXC_SR(%a6)	# user or supervisor?
-	bne.b		ri_a7_done		# supervisor
-	movc		%usp,%a0		# restore USP
-	sub.l		%d0,%a0
-	movc		%a0,%usp
-ri_a7_done:
-	rts
-
-# need to invert adjustment value if the <ea> was predec
-rest_dec:
-	neg.l		%d0
-	bra.b		rest_inc
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/Kbuild b/ANDROID_3.4.5/arch/m68k/include/asm/Kbuild
deleted file mode 100644
index 1a922fad..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/Kbuild
+++ /dev/null
@@ -1,2 +0,0 @@
-include include/asm-generic/Kbuild.asm
-header-y += cachectl.h
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/MC68328.h b/ANDROID_3.4.5/arch/m68k/include/asm/MC68328.h
deleted file mode 100644
index a337e56d..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/MC68328.h
+++ /dev/null
@@ -1,1266 +0,0 @@
-
-/* include/asm-m68knommu/MC68328.h: '328 control registers
- *
- * Copyright (C) 1999  Vladimir Gurevich <vgurevic@cisco.com>
- *                     Bear & Hare Software, Inc.
- *
- * Based on include/asm-m68knommu/MC68332.h
- * Copyright (C) 1998  Kenneth Albanowski <kjahds@kjahds.com>,
- *
- */
-
-#ifndef _MC68328_H_
-#define _MC68328_H_
-
-#define BYTE_REF(addr) (*((volatile unsigned char*)addr))
-#define WORD_REF(addr) (*((volatile unsigned short*)addr))
-#define LONG_REF(addr) (*((volatile unsigned long*)addr))
-
-#define PUT_FIELD(field, val) (((val) << field##_SHIFT) & field##_MASK)
-#define GET_FIELD(reg, field) (((reg) & field##_MASK) >> field##_SHIFT)
-
-/********** 
- *
- * 0xFFFFF0xx -- System Control
- *
- **********/
- 
-/*
- * System Control Register (SCR)
- */
-#define SCR_ADDR	0xfffff000
-#define SCR		BYTE_REF(SCR_ADDR)
-
-#define SCR_WDTH8	0x01	/* 8-Bit Width Select */
-#define SCR_DMAP	0x04	/* Double Map */
-#define SCR_SO		0x08	/* Supervisor Only */
-#define SCR_BETEN	0x10	/* Bus-Error Time-Out Enable */
-#define SCR_PRV		0x20	/* Privilege Violation */
-#define SCR_WPV		0x40	/* Write Protect Violation */
-#define SCR_BETO	0x80	/* Bus-Error TimeOut */
-
-/*
- * Mask Revision Register
- */
-#define MRR_ADDR 0xfffff004
-#define MRR      LONG_REF(MRR_ADDR)
- 
-/********** 
- *
- * 0xFFFFF1xx -- Chip-Select logic
- *
- **********/
-
-/********** 
- *
- * 0xFFFFF2xx -- Phase Locked Loop (PLL) & Power Control
- *
- **********/
-
-/*
- * Group Base Address Registers
- */
-#define GRPBASEA_ADDR	0xfffff100
-#define GRPBASEB_ADDR	0xfffff102
-#define GRPBASEC_ADDR	0xfffff104
-#define GRPBASED_ADDR	0xfffff106
-
-#define GRPBASEA	WORD_REF(GRPBASEA_ADDR)
-#define GRPBASEB	WORD_REF(GRPBASEB_ADDR)
-#define GRPBASEC	WORD_REF(GRPBASEC_ADDR)
-#define GRPBASED	WORD_REF(GRPBASED_ADDR)
-
-#define GRPBASE_V	  0x0001	/* Valid */
-#define GRPBASE_GBA_MASK  0xfff0	/* Group Base Address (bits 31-20) */
-
-/*
- * Group Base Address Mask Registers 
- */
-#define GRPMASKA_ADDR	0xfffff108
-#define GRPMASKB_ADDR	0xfffff10a
-#define GRPMASKC_ADDR	0xfffff10c
-#define GRPMASKD_ADDR	0xfffff10e
-
-#define GRPMASKA	WORD_REF(GRPMASKA_ADDR)
-#define GRPMASKB	WORD_REF(GRPMASKB_ADDR)
-#define GRPMASKC	WORD_REF(GRPMASKC_ADDR)
-#define GRPMASKD	WORD_REF(GRPMASKD_ADDR)
-
-#define GRMMASK_GMA_MASK 0xfffff0	/* Group Base Mask (bits 31-20) */
-
-/*
- * Chip-Select Option Registers (group A)
- */
-#define CSA0_ADDR	0xfffff110
-#define CSA1_ADDR	0xfffff114
-#define CSA2_ADDR	0xfffff118
-#define CSA3_ADDR	0xfffff11c
-
-#define CSA0		LONG_REF(CSA0_ADDR)
-#define CSA1		LONG_REF(CSA1_ADDR)
-#define CSA2		LONG_REF(CSA2_ADDR)
-#define CSA3		LONG_REF(CSA3_ADDR)
-
-#define CSA_WAIT_MASK	0x00000007	/* Wait State Selection */
-#define CSA_WAIT_SHIFT	0
-#define CSA_RO		0x00000008	/* Read-Only */
-#define CSA_AM_MASK	0x0000ff00	/* Address Mask (bits 23-16) */
-#define CSA_AM_SHIFT	8
-#define CSA_BUSW	0x00010000	/* Bus Width Select */
-#define CSA_AC_MASK	0xff000000	/* Address Compare (bits 23-16) */
-#define CSA_AC_SHIFT	24
-
-/*
- * Chip-Select Option Registers (group B)
- */
-#define CSB0_ADDR	0xfffff120
-#define CSB1_ADDR	0xfffff124
-#define CSB2_ADDR	0xfffff128
-#define CSB3_ADDR	0xfffff12c
-
-#define CSB0		LONG_REF(CSB0_ADDR)
-#define CSB1		LONG_REF(CSB1_ADDR)
-#define CSB2		LONG_REF(CSB2_ADDR)
-#define CSB3		LONG_REF(CSB3_ADDR)
-
-#define CSB_WAIT_MASK	0x00000007	/* Wait State Selection */
-#define CSB_WAIT_SHIFT	0
-#define CSB_RO		0x00000008	/* Read-Only */
-#define CSB_AM_MASK	0x0000ff00	/* Address Mask (bits 23-16) */
-#define CSB_AM_SHIFT	8
-#define CSB_BUSW	0x00010000	/* Bus Width Select */
-#define CSB_AC_MASK	0xff000000	/* Address Compare (bits 23-16) */
-#define CSB_AC_SHIFT	24
-
-/*
- * Chip-Select Option Registers (group C)
- */
-#define CSC0_ADDR	0xfffff130
-#define CSC1_ADDR	0xfffff134
-#define CSC2_ADDR	0xfffff138
-#define CSC3_ADDR	0xfffff13c
-
-#define CSC0		LONG_REF(CSC0_ADDR)
-#define CSC1		LONG_REF(CSC1_ADDR)
-#define CSC2		LONG_REF(CSC2_ADDR)
-#define CSC3		LONG_REF(CSC3_ADDR)
-
-#define CSC_WAIT_MASK	0x00000007	/* Wait State Selection */
-#define CSC_WAIT_SHIFT	0
-#define CSC_RO		0x00000008	/* Read-Only */
-#define CSC_AM_MASK	0x0000fff0	/* Address Mask (bits 23-12) */
-#define CSC_AM_SHIFT	4
-#define CSC_BUSW	0x00010000	/* Bus Width Select */
-#define CSC_AC_MASK	0xfff00000	/* Address Compare (bits 23-12) */
-#define CSC_AC_SHIFT	20
-
-/*
- * Chip-Select Option Registers (group D)
- */
-#define CSD0_ADDR	0xfffff140
-#define CSD1_ADDR	0xfffff144
-#define CSD2_ADDR	0xfffff148
-#define CSD3_ADDR	0xfffff14c
-
-#define CSD0		LONG_REF(CSD0_ADDR)
-#define CSD1		LONG_REF(CSD1_ADDR)
-#define CSD2		LONG_REF(CSD2_ADDR)
-#define CSD3		LONG_REF(CSD3_ADDR)
-
-#define CSD_WAIT_MASK	0x00000007	/* Wait State Selection */
-#define CSD_WAIT_SHIFT	0
-#define CSD_RO		0x00000008	/* Read-Only */
-#define CSD_AM_MASK	0x0000fff0	/* Address Mask (bits 23-12) */
-#define CSD_AM_SHIFT	4
-#define CSD_BUSW	0x00010000	/* Bus Width Select */
-#define CSD_AC_MASK	0xfff00000	/* Address Compare (bits 23-12) */
-#define CSD_AC_SHIFT	20
-
-/**********
- *
- * 0xFFFFF2xx -- Phase Locked Loop (PLL) & Power Control
- *
- **********/
- 
-/*
- * PLL Control Register 
- */
-#define PLLCR_ADDR	0xfffff200
-#define PLLCR		WORD_REF(PLLCR_ADDR)
-
-#define PLLCR_DISPLL	       0x0008	/* Disable PLL */
-#define PLLCR_CLKEN	       0x0010	/* Clock (CLKO pin) enable */
-#define PLLCR_SYSCLK_SEL_MASK  0x0700	/* System Clock Selection */
-#define PLLCR_SYSCLK_SEL_SHIFT 8
-#define PLLCR_PIXCLK_SEL_MASK  0x3800	/* LCD Clock Selection */
-#define PLLCR_PIXCLK_SEL_SHIFT 11
-
-/* 'EZ328-compatible definitions */
-#define PLLCR_LCDCLK_SEL_MASK	PLLCR_PIXCLK_SEL_MASK
-#define PLLCR_LCDCLK_SEL_SHIFT	PLLCR_PIXCLK_SEL_SHIFT
-
-/*
- * PLL Frequency Select Register
- */
-#define PLLFSR_ADDR	0xfffff202
-#define PLLFSR		WORD_REF(PLLFSR_ADDR)
-
-#define PLLFSR_PC_MASK	0x00ff		/* P Count */
-#define PLLFSR_PC_SHIFT 0
-#define PLLFSR_QC_MASK	0x0f00		/* Q Count */
-#define PLLFSR_QC_SHIFT 8
-#define PLLFSR_PROT	0x4000		/* Protect P & Q */
-#define PLLFSR_CLK32	0x8000		/* Clock 32 (kHz) */
-
-/*
- * Power Control Register
- */
-#define PCTRL_ADDR	0xfffff207
-#define PCTRL		BYTE_REF(PCTRL_ADDR)
-
-#define PCTRL_WIDTH_MASK	0x1f	/* CPU Clock bursts width */
-#define PCTRL_WIDTH_SHIFT	0
-#define PCTRL_STOP		0x40	/* Enter power-save mode immediately */ 
-#define PCTRL_PCEN		0x80	/* Power Control Enable */
-
-/**********
- *
- * 0xFFFFF3xx -- Interrupt Controller
- *
- **********/
-
-/* 
- * Interrupt Vector Register
- */
-#define IVR_ADDR	0xfffff300
-#define IVR		BYTE_REF(IVR_ADDR)
-
-#define IVR_VECTOR_MASK 0xF8
-
-/*
- * Interrupt control Register
- */
-#define ICR_ADRR	0xfffff302
-#define ICR		WORD_REF(ICR_ADDR)
-
-#define ICR_ET6		0x0100	/* Edge Trigger Select for IRQ6 */
-#define ICR_ET3		0x0200	/* Edge Trigger Select for IRQ3 */
-#define ICR_ET2		0x0400	/* Edge Trigger Select for IRQ2 */
-#define ICR_ET1		0x0800	/* Edge Trigger Select for IRQ1 */
-#define ICR_POL6	0x1000	/* Polarity Control for IRQ6 */
-#define ICR_POL3	0x2000	/* Polarity Control for IRQ3 */
-#define ICR_POL2	0x4000	/* Polarity Control for IRQ2 */
-#define ICR_POL1	0x8000	/* Polarity Control for IRQ1 */
-
-/*
- * Interrupt Mask Register
- */
-#define IMR_ADDR	0xfffff304
-#define IMR		LONG_REF(IMR_ADDR)
- 
-/*
- * Define the names for bit positions first. This is useful for
- * request_irq
- */
-#define SPIM_IRQ_NUM	0	/* SPI Master interrupt */
-#define	TMR2_IRQ_NUM	1	/* Timer 2 interrupt */
-#define UART_IRQ_NUM	2	/* UART interrupt */	
-#define	WDT_IRQ_NUM	3	/* Watchdog Timer interrupt */
-#define RTC_IRQ_NUM	4	/* RTC interrupt */
-#define	KB_IRQ_NUM	6	/* Keyboard Interrupt */
-#define PWM_IRQ_NUM	7	/* Pulse-Width Modulator int. */
-#define	INT0_IRQ_NUM	8	/* External INT0 */
-#define	INT1_IRQ_NUM	9	/* External INT1 */
-#define	INT2_IRQ_NUM	10	/* External INT2 */
-#define	INT3_IRQ_NUM	11	/* External INT3 */
-#define	INT4_IRQ_NUM	12	/* External INT4 */
-#define	INT5_IRQ_NUM	13	/* External INT5 */
-#define	INT6_IRQ_NUM	14	/* External INT6 */
-#define	INT7_IRQ_NUM	15	/* External INT7 */
-#define IRQ1_IRQ_NUM	16	/* IRQ1 */
-#define IRQ2_IRQ_NUM	17	/* IRQ2 */
-#define IRQ3_IRQ_NUM	18	/* IRQ3 */
-#define IRQ6_IRQ_NUM	19	/* IRQ6 */
-#define PEN_IRQ_NUM	20	/* Pen Interrupt */
-#define SPIS_IRQ_NUM	21	/* SPI Slave Interrupt */
-#define TMR1_IRQ_NUM	22	/* Timer 1 interrupt */
-#define IRQ7_IRQ_NUM	23	/* IRQ7 */
-
-/* '328-compatible definitions */
-#define SPI_IRQ_NUM	SPIM_IRQ_NUM
-#define TMR_IRQ_NUM	TMR1_IRQ_NUM
- 
-/*
- * Here go the bitmasks themselves
- */
-#define IMR_MSPIM 	(1 << SPIM _IRQ_NUM)	/* Mask SPI Master interrupt */
-#define	IMR_MTMR2	(1 << TMR2_IRQ_NUM)	/* Mask Timer 2 interrupt */
-#define IMR_MUART	(1 << UART_IRQ_NUM)	/* Mask UART interrupt */	
-#define	IMR_MWDT	(1 << WDT_IRQ_NUM)	/* Mask Watchdog Timer interrupt */
-#define IMR_MRTC	(1 << RTC_IRQ_NUM)	/* Mask RTC interrupt */
-#define	IMR_MKB		(1 << KB_IRQ_NUM)	/* Mask Keyboard Interrupt */
-#define IMR_MPWM	(1 << PWM_IRQ_NUM)	/* Mask Pulse-Width Modulator int. */
-#define	IMR_MINT0	(1 << INT0_IRQ_NUM)	/* Mask External INT0 */
-#define	IMR_MINT1	(1 << INT1_IRQ_NUM)	/* Mask External INT1 */
-#define	IMR_MINT2	(1 << INT2_IRQ_NUM)	/* Mask External INT2 */
-#define	IMR_MINT3	(1 << INT3_IRQ_NUM)	/* Mask External INT3 */
-#define	IMR_MINT4	(1 << INT4_IRQ_NUM)	/* Mask External INT4 */
-#define	IMR_MINT5	(1 << INT5_IRQ_NUM)	/* Mask External INT5 */
-#define	IMR_MINT6	(1 << INT6_IRQ_NUM)	/* Mask External INT6 */
-#define	IMR_MINT7	(1 << INT7_IRQ_NUM)	/* Mask External INT7 */
-#define IMR_MIRQ1	(1 << IRQ1_IRQ_NUM)	/* Mask IRQ1 */
-#define IMR_MIRQ2	(1 << IRQ2_IRQ_NUM)	/* Mask IRQ2 */
-#define IMR_MIRQ3	(1 << IRQ3_IRQ_NUM)	/* Mask IRQ3 */
-#define IMR_MIRQ6	(1 << IRQ6_IRQ_NUM)	/* Mask IRQ6 */
-#define IMR_MPEN	(1 << PEN_IRQ_NUM)	/* Mask Pen Interrupt */
-#define IMR_MSPIS	(1 << SPIS_IRQ_NUM)	/* Mask SPI Slave Interrupt */
-#define IMR_MTMR1	(1 << TMR1_IRQ_NUM)	/* Mask Timer 1 interrupt */
-#define IMR_MIRQ7	(1 << IRQ7_IRQ_NUM)	/* Mask IRQ7 */
-
-/* 'EZ328-compatible definitions */
-#define IMR_MSPI	IMR_MSPIM
-#define IMR_MTMR	IMR_MTMR1
-
-/* 
- * Interrupt Wake-Up Enable Register
- */
-#define IWR_ADDR	0xfffff308
-#define IWR		LONG_REF(IWR_ADDR)
-
-#define IWR_SPIM 	(1 << SPIM _IRQ_NUM)	/* SPI Master interrupt */
-#define	IWR_TMR2	(1 << TMR2_IRQ_NUM)	/* Timer 2 interrupt */
-#define IWR_UART	(1 << UART_IRQ_NUM)	/* UART interrupt */	
-#define	IWR_WDT		(1 << WDT_IRQ_NUM)	/* Watchdog Timer interrupt */
-#define IWR_RTC		(1 << RTC_IRQ_NUM)	/* RTC interrupt */
-#define	IWR_KB		(1 << KB_IRQ_NUM)	/* Keyboard Interrupt */
-#define IWR_PWM		(1 << PWM_IRQ_NUM)	/* Pulse-Width Modulator int. */
-#define	IWR_INT0	(1 << INT0_IRQ_NUM)	/* External INT0 */
-#define	IWR_INT1	(1 << INT1_IRQ_NUM)	/* External INT1 */
-#define	IWR_INT2	(1 << INT2_IRQ_NUM)	/* External INT2 */
-#define	IWR_INT3	(1 << INT3_IRQ_NUM)	/* External INT3 */
-#define	IWR_INT4	(1 << INT4_IRQ_NUM)	/* External INT4 */
-#define	IWR_INT5	(1 << INT5_IRQ_NUM)	/* External INT5 */
-#define	IWR_INT6	(1 << INT6_IRQ_NUM)	/* External INT6 */
-#define	IWR_INT7	(1 << INT7_IRQ_NUM)	/* External INT7 */
-#define IWR_IRQ1	(1 << IRQ1_IRQ_NUM)	/* IRQ1 */
-#define IWR_IRQ2	(1 << IRQ2_IRQ_NUM)	/* IRQ2 */
-#define IWR_IRQ3	(1 << IRQ3_IRQ_NUM)	/* IRQ3 */
-#define IWR_IRQ6	(1 << IRQ6_IRQ_NUM)	/* IRQ6 */
-#define IWR_PEN		(1 << PEN_IRQ_NUM)	/* Pen Interrupt */
-#define IWR_SPIS	(1 << SPIS_IRQ_NUM)	/* SPI Slave Interrupt */
-#define IWR_TMR1	(1 << TMR1_IRQ_NUM)	/* Timer 1 interrupt */
-#define IWR_IRQ7	(1 << IRQ7_IRQ_NUM)	/* IRQ7 */
-
-/* 
- * Interrupt Status Register 
- */
-#define ISR_ADDR	0xfffff30c
-#define ISR		LONG_REF(ISR_ADDR)
-
-#define ISR_SPIM 	(1 << SPIM _IRQ_NUM)	/* SPI Master interrupt */
-#define	ISR_TMR2	(1 << TMR2_IRQ_NUM)	/* Timer 2 interrupt */
-#define ISR_UART	(1 << UART_IRQ_NUM)	/* UART interrupt */	
-#define	ISR_WDT		(1 << WDT_IRQ_NUM)	/* Watchdog Timer interrupt */
-#define ISR_RTC		(1 << RTC_IRQ_NUM)	/* RTC interrupt */
-#define	ISR_KB		(1 << KB_IRQ_NUM)	/* Keyboard Interrupt */
-#define ISR_PWM		(1 << PWM_IRQ_NUM)	/* Pulse-Width Modulator int. */
-#define	ISR_INT0	(1 << INT0_IRQ_NUM)	/* External INT0 */
-#define	ISR_INT1	(1 << INT1_IRQ_NUM)	/* External INT1 */
-#define	ISR_INT2	(1 << INT2_IRQ_NUM)	/* External INT2 */
-#define	ISR_INT3	(1 << INT3_IRQ_NUM)	/* External INT3 */
-#define	ISR_INT4	(1 << INT4_IRQ_NUM)	/* External INT4 */
-#define	ISR_INT5	(1 << INT5_IRQ_NUM)	/* External INT5 */
-#define	ISR_INT6	(1 << INT6_IRQ_NUM)	/* External INT6 */
-#define	ISR_INT7	(1 << INT7_IRQ_NUM)	/* External INT7 */
-#define ISR_IRQ1	(1 << IRQ1_IRQ_NUM)	/* IRQ1 */
-#define ISR_IRQ2	(1 << IRQ2_IRQ_NUM)	/* IRQ2 */
-#define ISR_IRQ3	(1 << IRQ3_IRQ_NUM)	/* IRQ3 */
-#define ISR_IRQ6	(1 << IRQ6_IRQ_NUM)	/* IRQ6 */
-#define ISR_PEN		(1 << PEN_IRQ_NUM)	/* Pen Interrupt */
-#define ISR_SPIS	(1 << SPIS_IRQ_NUM)	/* SPI Slave Interrupt */
-#define ISR_TMR1	(1 << TMR1_IRQ_NUM)	/* Timer 1 interrupt */
-#define ISR_IRQ7	(1 << IRQ7_IRQ_NUM)	/* IRQ7 */
-
-/* 'EZ328-compatible definitions */
-#define ISR_SPI	ISR_SPIM
-#define ISR_TMR	ISR_TMR1
-
-/* 
- * Interrupt Pending Register 
- */
-#define IPR_ADDR	0xfffff310
-#define IPR		LONG_REF(IPR_ADDR)
-
-#define IPR_SPIM 	(1 << SPIM _IRQ_NUM)	/* SPI Master interrupt */
-#define	IPR_TMR2	(1 << TMR2_IRQ_NUM)	/* Timer 2 interrupt */
-#define IPR_UART	(1 << UART_IRQ_NUM)	/* UART interrupt */	
-#define	IPR_WDT		(1 << WDT_IRQ_NUM)	/* Watchdog Timer interrupt */
-#define IPR_RTC		(1 << RTC_IRQ_NUM)	/* RTC interrupt */
-#define	IPR_KB		(1 << KB_IRQ_NUM)	/* Keyboard Interrupt */
-#define IPR_PWM		(1 << PWM_IRQ_NUM)	/* Pulse-Width Modulator int. */
-#define	IPR_INT0	(1 << INT0_IRQ_NUM)	/* External INT0 */
-#define	IPR_INT1	(1 << INT1_IRQ_NUM)	/* External INT1 */
-#define	IPR_INT2	(1 << INT2_IRQ_NUM)	/* External INT2 */
-#define	IPR_INT3	(1 << INT3_IRQ_NUM)	/* External INT3 */
-#define	IPR_INT4	(1 << INT4_IRQ_NUM)	/* External INT4 */
-#define	IPR_INT5	(1 << INT5_IRQ_NUM)	/* External INT5 */
-#define	IPR_INT6	(1 << INT6_IRQ_NUM)	/* External INT6 */
-#define	IPR_INT7	(1 << INT7_IRQ_NUM)	/* External INT7 */
-#define IPR_IRQ1	(1 << IRQ1_IRQ_NUM)	/* IRQ1 */
-#define IPR_IRQ2	(1 << IRQ2_IRQ_NUM)	/* IRQ2 */
-#define IPR_IRQ3	(1 << IRQ3_IRQ_NUM)	/* IRQ3 */
-#define IPR_IRQ6	(1 << IRQ6_IRQ_NUM)	/* IRQ6 */
-#define IPR_PEN		(1 << PEN_IRQ_NUM)	/* Pen Interrupt */
-#define IPR_SPIS	(1 << SPIS_IRQ_NUM)	/* SPI Slave Interrupt */
-#define IPR_TMR1	(1 << TMR1_IRQ_NUM)	/* Timer 1 interrupt */
-#define IPR_IRQ7	(1 << IRQ7_IRQ_NUM)	/* IRQ7 */
-
-/* 'EZ328-compatible definitions */
-#define IPR_SPI	IPR_SPIM
-#define IPR_TMR	IPR_TMR1
-
-/**********
- *
- * 0xFFFFF4xx -- Parallel Ports
- *
- **********/
-
-/*
- * Port A
- */
-#define PADIR_ADDR	0xfffff400		/* Port A direction reg */
-#define PADATA_ADDR	0xfffff401		/* Port A data register */
-#define PASEL_ADDR	0xfffff403		/* Port A Select register */
-
-#define PADIR		BYTE_REF(PADIR_ADDR)
-#define PADATA		BYTE_REF(PADATA_ADDR)
-#define PASEL		BYTE_REF(PASEL_ADDR)
-
-#define PA(x)           (1 << (x))
-#define PA_A(x)		PA((x) - 16)	/* This is specific to PA only! */
-
-#define PA_A16		PA(0)		/* Use A16 as PA(0) */
-#define PA_A17		PA(1)		/* Use A17 as PA(1) */
-#define PA_A18		PA(2)		/* Use A18 as PA(2) */
-#define PA_A19		PA(3)		/* Use A19 as PA(3) */
-#define PA_A20		PA(4)		/* Use A20 as PA(4) */
-#define PA_A21		PA(5)		/* Use A21 as PA(5) */
-#define PA_A22		PA(6)		/* Use A22 as PA(6) */
-#define PA_A23		PA(7)		/* Use A23 as PA(7) */
-
-/* 
- * Port B
- */
-#define PBDIR_ADDR	0xfffff408		/* Port B direction reg */
-#define PBDATA_ADDR	0xfffff409		/* Port B data register */
-#define PBSEL_ADDR	0xfffff40b		/* Port B Select Register */
-
-#define PBDIR		BYTE_REF(PBDIR_ADDR)
-#define PBDATA		BYTE_REF(PBDATA_ADDR)
-#define PBSEL		BYTE_REF(PBSEL_ADDR)
-
-#define PB(x)           (1 << (x))
-#define PB_D(x)		PB(x)		/* This is specific to port B only */
-
-#define PB_D0		PB(0)		/* Use D0 as PB(0) */
-#define PB_D1		PB(1)		/* Use D1 as PB(1) */
-#define PB_D2		PB(2)		/* Use D2 as PB(2) */
-#define PB_D3		PB(3)		/* Use D3 as PB(3) */
-#define PB_D4		PB(4)		/* Use D4 as PB(4) */
-#define PB_D5		PB(5)		/* Use D5 as PB(5) */
-#define PB_D6		PB(6)		/* Use D6 as PB(6) */
-#define PB_D7		PB(7)		/* Use D7 as PB(7) */
-
-/* 
- * Port C
- */
-#define PCDIR_ADDR	0xfffff410		/* Port C direction reg */
-#define PCDATA_ADDR	0xfffff411		/* Port C data register */
-#define PCSEL_ADDR	0xfffff413		/* Port C Select Register */
-
-#define PCDIR		BYTE_REF(PCDIR_ADDR)
-#define PCDATA		BYTE_REF(PCDATA_ADDR)
-#define PCSEL		BYTE_REF(PCSEL_ADDR)
-
-#define PC(x)           (1 << (x))
-
-#define PC_WE		PC(6)		/* Use WE    as PC(6) */
-#define PC_DTACK	PC(5)		/* Use DTACK as PC(5) */
-#define PC_IRQ7		PC(4)		/* Use IRQ7  as PC(4) */
-#define PC_LDS		PC(2)		/* Use LDS   as PC(2) */
-#define PC_UDS		PC(1)		/* Use UDS   as PC(1) */
-#define PC_MOCLK	PC(0)		/* Use MOCLK as PC(0) */
-
-/* 
- * Port D
- */
-#define PDDIR_ADDR	0xfffff418		/* Port D direction reg */
-#define PDDATA_ADDR	0xfffff419		/* Port D data register */
-#define PDPUEN_ADDR	0xfffff41a		/* Port D Pull-Up enable reg */
-#define PDPOL_ADDR	0xfffff41c		/* Port D Polarity Register */
-#define PDIRQEN_ADDR	0xfffff41d		/* Port D IRQ enable register */
-#define	PDIQEG_ADDR	0xfffff41f		/* Port D IRQ Edge Register */
-
-#define PDDIR		BYTE_REF(PDDIR_ADDR)
-#define PDDATA		BYTE_REF(PDDATA_ADDR)
-#define PDPUEN		BYTE_REF(PDPUEN_ADDR)
-#define	PDPOL		BYTE_REF(PDPOL_ADDR)
-#define PDIRQEN		BYTE_REF(PDIRQEN_ADDR)
-#define PDIQEG		BYTE_REF(PDIQEG_ADDR)
-
-#define PD(x)           (1 << (x))
-#define PD_KB(x)	PD(x)		/* This is specific for Port D only */
-
-#define PD_KB0		PD(0)	/* Use KB0 as PD(0) */
-#define PD_KB1		PD(1)	/* Use KB1 as PD(1) */
-#define PD_KB2		PD(2)	/* Use KB2 as PD(2) */
-#define PD_KB3		PD(3)	/* Use KB3 as PD(3) */
-#define PD_KB4		PD(4)	/* Use KB4 as PD(4) */
-#define PD_KB5		PD(5)	/* Use KB5 as PD(5) */
-#define PD_KB6		PD(6)	/* Use KB6 as PD(6) */
-#define PD_KB7		PD(7)	/* Use KB7 as PD(7) */
-
-/* 
- * Port E
- */
-#define PEDIR_ADDR	0xfffff420		/* Port E direction reg */
-#define PEDATA_ADDR	0xfffff421		/* Port E data register */
-#define PEPUEN_ADDR	0xfffff422		/* Port E Pull-Up enable reg */
-#define PESEL_ADDR	0xfffff423		/* Port E Select Register */
-
-#define PEDIR		BYTE_REF(PEDIR_ADDR)
-#define PEDATA		BYTE_REF(PEDATA_ADDR)
-#define PEPUEN		BYTE_REF(PEPUEN_ADDR)
-#define PESEL		BYTE_REF(PESEL_ADDR)
-
-#define PE(x)           (1 << (x))
-
-#define PE_CSA1		PE(1)	/* Use CSA1 as PE(1) */
-#define PE_CSA2		PE(2)	/* Use CSA2 as PE(2) */
-#define PE_CSA3		PE(3)	/* Use CSA3 as PE(3) */
-#define PE_CSB0		PE(4)	/* Use CSB0 as PE(4) */
-#define PE_CSB1		PE(5)	/* Use CSB1 as PE(5) */
-#define PE_CSB2		PE(6)	/* Use CSB2 as PE(6) */
-#define PE_CSB3		PE(7)	/* Use CSB3 as PE(7) */
-
-/* 
- * Port F
- */
-#define PFDIR_ADDR	0xfffff428		/* Port F direction reg */
-#define PFDATA_ADDR	0xfffff429		/* Port F data register */
-#define PFPUEN_ADDR	0xfffff42a		/* Port F Pull-Up enable reg */
-#define PFSEL_ADDR	0xfffff42b		/* Port F Select Register */
-
-#define PFDIR		BYTE_REF(PFDIR_ADDR)
-#define PFDATA		BYTE_REF(PFDATA_ADDR)
-#define PFPUEN		BYTE_REF(PFPUEN_ADDR)
-#define PFSEL		BYTE_REF(PFSEL_ADDR)
-
-#define PF(x)           (1 << (x))
-#define PF_A(x)		PF((x) - 24)	/* This is Port F specific only */
-
-#define PF_A24		PF(0)	/* Use A24 as PF(0) */
-#define PF_A25		PF(1)	/* Use A25 as PF(1) */
-#define PF_A26		PF(2)	/* Use A26 as PF(2) */
-#define PF_A27		PF(3)	/* Use A27 as PF(3) */
-#define PF_A28		PF(4)	/* Use A28 as PF(4) */
-#define PF_A29		PF(5)	/* Use A29 as PF(5) */
-#define PF_A30		PF(6)	/* Use A30 as PF(6) */
-#define PF_A31		PF(7)	/* Use A31 as PF(7) */
-
-/* 
- * Port G
- */
-#define PGDIR_ADDR	0xfffff430		/* Port G direction reg */
-#define PGDATA_ADDR	0xfffff431		/* Port G data register */
-#define PGPUEN_ADDR	0xfffff432		/* Port G Pull-Up enable reg */
-#define PGSEL_ADDR	0xfffff433		/* Port G Select Register */
-
-#define PGDIR		BYTE_REF(PGDIR_ADDR)
-#define PGDATA		BYTE_REF(PGDATA_ADDR)
-#define PGPUEN		BYTE_REF(PGPUEN_ADDR)
-#define PGSEL		BYTE_REF(PGSEL_ADDR)
-
-#define PG(x)           (1 << (x))
-
-#define PG_UART_TXD	PG(0)	/* Use UART_TXD as PG(0) */
-#define PG_UART_RXD	PG(1)	/* Use UART_RXD as PG(1) */
-#define PG_PWMOUT	PG(2)	/* Use PWMOUT   as PG(2) */
-#define PG_TOUT2	PG(3)   /* Use TOUT2    as PG(3) */
-#define PG_TIN2		PG(4)	/* Use TIN2     as PG(4) */
-#define PG_TOUT1	PG(5)   /* Use TOUT1    as PG(5) */
-#define PG_TIN1		PG(6)	/* Use TIN1     as PG(6) */
-#define PG_RTCOUT	PG(7)	/* Use RTCOUT   as PG(7) */
-
-/* 
- * Port J
- */
-#define PJDIR_ADDR	0xfffff438		/* Port J direction reg */
-#define PJDATA_ADDR	0xfffff439		/* Port J data register */
-#define PJSEL_ADDR	0xfffff43b		/* Port J Select Register */
-
-#define PJDIR		BYTE_REF(PJDIR_ADDR)
-#define PJDATA		BYTE_REF(PJDATA_ADDR)
-#define PJSEL		BYTE_REF(PJSEL_ADDR)
-
-#define PJ(x)           (1 << (x)) 
-
-#define PJ_CSD3		PJ(7)	/* Use CSD3 as PJ(7) */
-
-/* 
- * Port K
- */
-#define PKDIR_ADDR	0xfffff440		/* Port K direction reg */
-#define PKDATA_ADDR	0xfffff441		/* Port K data register */
-#define PKPUEN_ADDR	0xfffff442		/* Port K Pull-Up enable reg */
-#define PKSEL_ADDR	0xfffff443		/* Port K Select Register */
-
-#define PKDIR		BYTE_REF(PKDIR_ADDR)
-#define PKDATA		BYTE_REF(PKDATA_ADDR)
-#define PKPUEN		BYTE_REF(PKPUEN_ADDR)
-#define PKSEL		BYTE_REF(PKSEL_ADDR)
-
-#define PK(x)           (1 << (x))
-
-/* 
- * Port M
- */
-#define PMDIR_ADDR	0xfffff438		/* Port M direction reg */
-#define PMDATA_ADDR	0xfffff439		/* Port M data register */
-#define PMPUEN_ADDR	0xfffff43a		/* Port M Pull-Up enable reg */
-#define PMSEL_ADDR	0xfffff43b		/* Port M Select Register */
-
-#define PMDIR		BYTE_REF(PMDIR_ADDR)
-#define PMDATA		BYTE_REF(PMDATA_ADDR)
-#define PMPUEN		BYTE_REF(PMPUEN_ADDR)
-#define PMSEL		BYTE_REF(PMSEL_ADDR)
-
-#define PM(x)           (1 << (x))
-
-/**********
- *
- * 0xFFFFF5xx -- Pulse-Width Modulator (PWM)
- *
- **********/
-
-/*
- * PWM Control Register 
- */
-#define PWMC_ADDR	0xfffff500
-#define PWMC		WORD_REF(PWMC_ADDR)
-
-#define PWMC_CLKSEL_MASK	0x0007	/* Clock Selection */
-#define PWMC_CLKSEL_SHIFT	0
-#define PWMC_PWMEN		0x0010	/* Enable PWM */
-#define PMNC_POL		0x0020	/* PWM Output Bit Polarity */
-#define PWMC_PIN		0x0080	/* Current PWM output pin status */
-#define PWMC_LOAD		0x0100	/* Force a new period */
-#define PWMC_IRQEN		0x4000	/* Interrupt Request Enable */
-#define PWMC_CLKSRC		0x8000	/* Clock Source Select */
-
-/* 'EZ328-compatible definitions */
-#define PWMC_EN	PWMC_PWMEN
-
-/*
- * PWM Period Register
- */
-#define PWMP_ADDR	0xfffff502
-#define PWMP		WORD_REF(PWMP_ADDR)
-
-/* 
- * PWM Width Register 
- */
-#define PWMW_ADDR	0xfffff504
-#define PWMW		WORD_REF(PWMW_ADDR)
-
-/*
- * PWM Counter Register
- */
-#define PWMCNT_ADDR	0xfffff506
-#define PWMCNT		WORD_REF(PWMCNT_ADDR)
-
-/**********
- *
- * 0xFFFFF6xx -- General-Purpose Timers
- *
- **********/
-
-/* 
- * Timer Unit 1 and 2 Control Registers
- */
-#define TCTL1_ADDR	0xfffff600
-#define TCTL1		WORD_REF(TCTL1_ADDR)
-#define TCTL2_ADDR	0xfffff60c
-#define TCTL2		WORD_REF(TCTL2_ADDR)
-
-#define	TCTL_TEN		0x0001	/* Timer Enable  */
-#define TCTL_CLKSOURCE_MASK 	0x000e	/* Clock Source: */
-#define   TCTL_CLKSOURCE_STOP	   0x0000	/* Stop count (disabled)    */
-#define   TCTL_CLKSOURCE_SYSCLK	   0x0002	/* SYSCLK to prescaler      */
-#define   TCTL_CLKSOURCE_SYSCLK_16 0x0004	/* SYSCLK/16 to prescaler   */
-#define   TCTL_CLKSOURCE_TIN	   0x0006	/* TIN to prescaler         */
-#define   TCTL_CLKSOURCE_32KHZ	   0x0008	/* 32kHz clock to prescaler */
-#define TCTL_IRQEN		0x0010	/* IRQ Enable    */
-#define TCTL_OM			0x0020	/* Output Mode   */
-#define TCTL_CAP_MASK		0x00c0	/* Capture Edge: */
-#define	  TCTL_CAP_RE		0x0040		/* Capture on rizing edge   */
-#define   TCTL_CAP_FE		0x0080		/* Capture on falling edge  */
-#define TCTL_FRR		0x0010	/* Free-Run Mode */
-
-/* 'EZ328-compatible definitions */
-#define TCTL_ADDR	TCTL1_ADDR
-#define TCTL		TCTL1
-
-/*
- * Timer Unit 1 and 2 Prescaler Registers
- */
-#define TPRER1_ADDR	0xfffff602
-#define TPRER1		WORD_REF(TPRER1_ADDR)
-#define TPRER2_ADDR	0xfffff60e
-#define TPRER2		WORD_REF(TPRER2_ADDR)
-
-/* 'EZ328-compatible definitions */
-#define TPRER_ADDR	TPRER1_ADDR
-#define TPRER		TPRER1
-
-/*
- * Timer Unit 1 and 2 Compare Registers
- */
-#define TCMP1_ADDR	0xfffff604
-#define TCMP1		WORD_REF(TCMP1_ADDR)
-#define TCMP2_ADDR	0xfffff610
-#define TCMP2		WORD_REF(TCMP2_ADDR)
-
-/* 'EZ328-compatible definitions */
-#define TCMP_ADDR	TCMP1_ADDR
-#define TCMP		TCMP1
-
-/*
- * Timer Unit 1 and 2 Capture Registers
- */
-#define TCR1_ADDR	0xfffff606
-#define TCR1		WORD_REF(TCR1_ADDR)
-#define TCR2_ADDR	0xfffff612
-#define TCR2		WORD_REF(TCR2_ADDR)
-
-/* 'EZ328-compatible definitions */
-#define TCR_ADDR	TCR1_ADDR
-#define TCR		TCR1
-
-/*
- * Timer Unit 1 and 2 Counter Registers
- */
-#define TCN1_ADDR	0xfffff608
-#define TCN1		WORD_REF(TCN1_ADDR)
-#define TCN2_ADDR	0xfffff614
-#define TCN2		WORD_REF(TCN2_ADDR)
-
-/* 'EZ328-compatible definitions */
-#define TCN_ADDR	TCN1_ADDR
-#define TCN		TCN
-
-/*
- * Timer Unit 1 and 2 Status Registers
- */
-#define TSTAT1_ADDR	0xfffff60a
-#define TSTAT1		WORD_REF(TSTAT1_ADDR)
-#define TSTAT2_ADDR	0xfffff616
-#define TSTAT2		WORD_REF(TSTAT2_ADDR)
-
-#define TSTAT_COMP	0x0001		/* Compare Event occurred */
-#define TSTAT_CAPT	0x0001		/* Capture Event occurred */
-
-/* 'EZ328-compatible definitions */
-#define TSTAT_ADDR	TSTAT1_ADDR
-#define TSTAT		TSTAT1
-
-/*
- * Watchdog Compare Register 
- */
-#define WRR_ADDR	0xfffff61a
-#define WRR		WORD_REF(WRR_ADDR)
-
-/*
- * Watchdog Counter Register 
- */
-#define WCN_ADDR	0xfffff61c
-#define WCN		WORD_REF(WCN_ADDR)
-
-/*
- * Watchdog Control and Status Register
- */
-#define WCSR_ADDR	0xfffff618
-#define WCSR		WORD_REF(WCSR_ADDR)
-
-#define WCSR_WDEN	0x0001	/* Watchdog Enable */
-#define WCSR_FI		0x0002	/* Forced Interrupt (instead of SW reset)*/
-#define WCSR_WRST	0x0004	/* Watchdog Reset */
-
-/**********
- *
- * 0xFFFFF7xx -- Serial Periferial Interface Slave (SPIS)
- *
- **********/
-
-/*
- * SPI Slave Register
- */
-#define SPISR_ADDR	0xfffff700
-#define SPISR		WORD_REF(SPISR_ADDR)
-
-#define SPISR_DATA_ADDR	0xfffff701
-#define SPISR_DATA	BYTE_REF(SPISR_DATA_ADDR)
-
-#define SPISR_DATA_MASK	 0x00ff	/* Shifted data from the external device */
-#define SPISR_DATA_SHIFT 0
-#define SPISR_SPISEN	 0x0100	/* SPIS module enable */
-#define SPISR_POL	 0x0200	/* SPSCLK polarity control */
-#define SPISR_PHA	 0x0400	/* Phase relationship between SPSCLK & SPSRxD */
-#define SPISR_OVWR	 0x0800	/* Data buffer has been overwritten */
-#define SPISR_DATARDY	 0x1000	/* Data ready */
-#define SPISR_ENPOL	 0x2000	/* Enable Polarity */
-#define SPISR_IRQEN	 0x4000	/* SPIS IRQ Enable */
-#define SPISR_SPISIRQ	 0x8000	/* SPIS IRQ posted */
-
-/**********
- *
- * 0xFFFFF8xx -- Serial Periferial Interface Master (SPIM)
- *
- **********/
-
-/*
- * SPIM Data Register
- */
-#define SPIMDATA_ADDR	0xfffff800
-#define SPIMDATA	WORD_REF(SPIMDATA_ADDR)
-
-/*
- * SPIM Control/Status Register
- */
-#define SPIMCONT_ADDR	0xfffff802
-#define SPIMCONT	WORD_REF(SPIMCONT_ADDR)
-
-#define SPIMCONT_BIT_COUNT_MASK	 0x000f	/* Transfer Length in Bytes */
-#define SPIMCONT_BIT_COUNT_SHIFT 0
-#define SPIMCONT_POL		 0x0010	/* SPMCLK Signel Polarity */
-#define	SPIMCONT_PHA		 0x0020	/* Clock/Data phase relationship */
-#define SPIMCONT_IRQEN		 0x0040 /* IRQ Enable */
-#define SPIMCONT_SPIMIRQ	 0x0080	/* Interrupt Request */
-#define SPIMCONT_XCH		 0x0100	/* Exchange */
-#define SPIMCONT_RSPIMEN	 0x0200	/* Enable SPIM */
-#define SPIMCONT_DATA_RATE_MASK	 0xe000	/* SPIM Data Rate */
-#define SPIMCONT_DATA_RATE_SHIFT 13
-
-/* 'EZ328-compatible definitions */
-#define SPIMCONT_IRQ	SPIMCONT_SPIMIRQ
-#define SPIMCONT_ENABLE	SPIMCONT_SPIMEN
-/**********
- *
- * 0xFFFFF9xx -- UART
- *
- **********/
-
-/*
- * UART Status/Control Register
- */
-#define USTCNT_ADDR	0xfffff900
-#define USTCNT		WORD_REF(USTCNT_ADDR)
-
-#define USTCNT_TXAVAILEN	0x0001	/* Transmitter Available Int Enable */
-#define USTCNT_TXHALFEN		0x0002	/* Transmitter Half Empty Int Enable */
-#define USTCNT_TXEMPTYEN	0x0004	/* Transmitter Empty Int Enable */
-#define USTCNT_RXREADYEN	0x0008	/* Receiver Ready Interrupt Enable */
-#define USTCNT_RXHALFEN		0x0010	/* Receiver Half-Full Int Enable */
-#define USTCNT_RXFULLEN		0x0020	/* Receiver Full Interrupt Enable */
-#define USTCNT_CTSDELTAEN	0x0040	/* CTS Delta Interrupt Enable */
-#define USTCNT_GPIODELTAEN	0x0080	/* Old Data Interrupt Enable */
-#define USTCNT_8_7		0x0100	/* Eight or seven-bit transmission */
-#define USTCNT_STOP		0x0200	/* Stop bit transmission */
-#define USTCNT_ODD_EVEN		0x0400	/* Odd Parity */
-#define	USTCNT_PARITYEN		0x0800	/* Parity Enable */
-#define USTCNT_CLKMODE		0x1000	/* Clock Mode Select */
-#define	USTCNT_TXEN		0x2000	/* Transmitter Enable */
-#define USTCNT_RXEN		0x4000	/* Receiver Enable */
-#define USTCNT_UARTEN		0x8000	/* UART Enable */
-
-/* 'EZ328-compatible definitions */
-#define USTCNT_TXAE	USTCNT_TXAVAILEN 
-#define USTCNT_TXHE	USTCNT_TXHALFEN
-#define USTCNT_TXEE	USTCNT_TXEMPTYEN
-#define USTCNT_RXRE	USTCNT_RXREADYEN
-#define USTCNT_RXHE	USTCNT_RXHALFEN
-#define USTCNT_RXFE	USTCNT_RXFULLEN
-#define USTCNT_CTSD	USTCNT_CTSDELTAEN
-#define USTCNT_ODD	USTCNT_ODD_EVEN
-#define USTCNT_PEN	USTCNT_PARITYEN
-#define USTCNT_CLKM	USTCNT_CLKMODE
-#define USTCNT_UEN	USTCNT_UARTEN
-
-/*
- * UART Baud Control Register
- */
-#define UBAUD_ADDR	0xfffff902
-#define UBAUD		WORD_REF(UBAUD_ADDR)
-
-#define UBAUD_PRESCALER_MASK	0x003f	/* Actual divisor is 65 - PRESCALER */
-#define UBAUD_PRESCALER_SHIFT	0
-#define UBAUD_DIVIDE_MASK	0x0700	/* Baud Rate freq. divizor */
-#define UBAUD_DIVIDE_SHIFT	8
-#define UBAUD_BAUD_SRC		0x0800	/* Baud Rate Source */
-#define UBAUD_GPIOSRC		0x1000	/* GPIO source */
-#define UBAUD_GPIODIR		0x2000	/* GPIO Direction */
-#define UBAUD_GPIO		0x4000	/* Current GPIO pin status */
-#define UBAUD_GPIODELTA		0x8000	/* GPIO pin value changed */
-
-/*
- * UART Receiver Register 
- */
-#define URX_ADDR	0xfffff904
-#define URX		WORD_REF(URX_ADDR)
-
-#define URX_RXDATA_ADDR	0xfffff905
-#define URX_RXDATA	BYTE_REF(URX_RXDATA_ADDR)
-
-#define URX_RXDATA_MASK	 0x00ff	/* Received data */
-#define URX_RXDATA_SHIFT 0
-#define URX_PARITY_ERROR 0x0100	/* Parity Error */
-#define URX_BREAK	 0x0200	/* Break Detected */
-#define URX_FRAME_ERROR	 0x0400	/* Framing Error */
-#define URX_OVRUN	 0x0800	/* Serial Overrun */
-#define URX_DATA_READY	 0x2000	/* Data Ready (FIFO not empty) */
-#define URX_FIFO_HALF	 0x4000 /* FIFO is Half-Full */
-#define URX_FIFO_FULL	 0x8000	/* FIFO is Full */
-
-/*
- * UART Transmitter Register 
- */
-#define UTX_ADDR	0xfffff906
-#define UTX		WORD_REF(UTX_ADDR)
-
-#define UTX_TXDATA_ADDR	0xfffff907
-#define UTX_TXDATA	BYTE_REF(UTX_TXDATA_ADDR)
-
-#define UTX_TXDATA_MASK	 0x00ff	/* Data to be transmitted */
-#define UTX_TXDATA_SHIFT 0
-#define UTX_CTS_DELTA	 0x0100	/* CTS changed */
-#define UTX_CTS_STATUS	 0x0200	/* CTS State */
-#define	UTX_IGNORE_CTS	 0x0800	/* Ignore CTS */
-#define UTX_SEND_BREAK	 0x1000	/* Send a BREAK */
-#define UTX_TX_AVAIL	 0x2000	/* Transmit FIFO has a slot available */
-#define UTX_FIFO_HALF	 0x4000	/* Transmit FIFO is half empty */
-#define UTX_FIFO_EMPTY	 0x8000	/* Transmit FIFO is empty */
-
-/* 'EZ328-compatible definitions */
-#define UTX_CTS_STAT	UTX_CTS_STATUS
-#define UTX_NOCTS	UTX_IGNORE_CTS
-
-/*
- * UART Miscellaneous Register 
- */
-#define UMISC_ADDR	0xfffff908
-#define UMISC		WORD_REF(UMISC_ADDR)
-
-#define UMISC_TX_POL	 0x0004	/* Transmit Polarity */
-#define UMISC_RX_POL	 0x0008	/* Receive Polarity */
-#define UMISC_IRDA_LOOP	 0x0010	/* IrDA Loopback Enable */
-#define UMISC_IRDA_EN	 0x0020	/* Infra-Red Enable */
-#define UMISC_RTS	 0x0040	/* Set RTS status */
-#define UMISC_RTSCONT	 0x0080	/* Choose RTS control */
-#define UMISC_LOOP	 0x1000	/* Serial Loopback Enable */
-#define UMISC_FORCE_PERR 0x2000	/* Force Parity Error */
-#define UMISC_CLKSRC	 0x4000	/* Clock Source */
-
-
-/* generalization of uart control registers to support multiple ports: */
-typedef volatile struct {
-  volatile unsigned short int ustcnt;
-  volatile unsigned short int ubaud;
-  union {
-    volatile unsigned short int w;
-    struct {
-      volatile unsigned char status;
-      volatile unsigned char rxdata;
-    } b;
-  } urx;
-  union {
-    volatile unsigned short int w;
-    struct {
-      volatile unsigned char status;
-      volatile unsigned char txdata;
-    } b;
-  } utx;
-  volatile unsigned short int umisc;
-  volatile unsigned short int pad1;
-  volatile unsigned short int pad2;
-  volatile unsigned short int pad3;
-} __attribute__((packed)) m68328_uart;
-
-
-/**********
- *
- * 0xFFFFFAxx -- LCD Controller
- *
- **********/
-
-/*
- * LCD Screen Starting Address Register 
- */
-#define LSSA_ADDR	0xfffffa00
-#define LSSA		LONG_REF(LSSA_ADDR)
-
-#define LSSA_SSA_MASK	0xfffffffe	/* Bit 0 is reserved */
-
-/*
- * LCD Virtual Page Width Register 
- */
-#define LVPW_ADDR	0xfffffa05
-#define LVPW		BYTE_REF(LVPW_ADDR)
-
-/*
- * LCD Screen Width Register (not compatible with 'EZ328 !!!)
- */
-#define LXMAX_ADDR	0xfffffa08
-#define LXMAX		WORD_REF(LXMAX_ADDR)
-
-#define LXMAX_XM_MASK	0x02ff		/* Bits 0-3 are reserved */
-
-/*
- * LCD Screen Height Register
- */
-#define LYMAX_ADDR	0xfffffa0a
-#define LYMAX		WORD_REF(LYMAX_ADDR)
-
-#define LYMAX_YM_MASK	0x02ff		/* Bits 10-15 are reserved */
-
-/*
- * LCD Cursor X Position Register
- */
-#define LCXP_ADDR	0xfffffa18
-#define LCXP		WORD_REF(LCXP_ADDR)
-
-#define LCXP_CC_MASK	0xc000		/* Cursor Control */
-#define   LCXP_CC_TRAMSPARENT	0x0000
-#define   LCXP_CC_BLACK		0x4000
-#define   LCXP_CC_REVERSED	0x8000
-#define   LCXP_CC_WHITE		0xc000
-#define LCXP_CXP_MASK	0x02ff		/* Cursor X position */
-
-/*
- * LCD Cursor Y Position Register
- */
-#define LCYP_ADDR	0xfffffa1a
-#define LCYP		WORD_REF(LCYP_ADDR)
-
-#define LCYP_CYP_MASK	0x01ff		/* Cursor Y Position */
-
-/*
- * LCD Cursor Width and Heigth Register
- */
-#define LCWCH_ADDR	0xfffffa1c
-#define LCWCH		WORD_REF(LCWCH_ADDR)
-
-#define LCWCH_CH_MASK	0x001f		/* Cursor Height */
-#define LCWCH_CH_SHIFT	0
-#define LCWCH_CW_MASK	0x1f00		/* Cursor Width */
-#define LCWCH_CW_SHIFT	8
-
-/*
- * LCD Blink Control Register
- */
-#define LBLKC_ADDR	0xfffffa1f
-#define LBLKC		BYTE_REF(LBLKC_ADDR)
-
-#define LBLKC_BD_MASK	0x7f	/* Blink Divisor */
-#define LBLKC_BD_SHIFT	0
-#define LBLKC_BKEN	0x80	/* Blink Enabled */
-
-/*
- * LCD Panel Interface Configuration Register 
- */
-#define LPICF_ADDR	0xfffffa20
-#define LPICF		BYTE_REF(LPICF_ADDR)
-
-#define LPICF_GS_MASK	 0x01	 /* Gray-Scale Mode */
-#define	  LPICF_GS_BW	   0x00
-#define   LPICF_GS_GRAY_4  0x01
-#define LPICF_PBSIZ_MASK 0x06	/* Panel Bus Width */
-#define   LPICF_PBSIZ_1	   0x00
-#define   LPICF_PBSIZ_2    0x02
-#define   LPICF_PBSIZ_4    0x04
-
-/*
- * LCD Polarity Configuration Register 
- */
-#define LPOLCF_ADDR	0xfffffa21
-#define LPOLCF		BYTE_REF(LPOLCF_ADDR)
-
-#define LPOLCF_PIXPOL	0x01	/* Pixel Polarity */
-#define LPOLCF_LPPOL	0x02	/* Line Pulse Polarity */
-#define LPOLCF_FLMPOL	0x04	/* Frame Marker Polarity */
-#define LPOLCF_LCKPOL	0x08	/* LCD Shift Lock Polarity */
-
-/*
- * LACD (LCD Alternate Crystal Direction) Rate Control Register
- */
-#define LACDRC_ADDR	0xfffffa23
-#define LACDRC		BYTE_REF(LACDRC_ADDR)
-
-#define LACDRC_ACD_MASK	 0x0f	/* Alternate Crystal Direction Control */
-#define LACDRC_ACD_SHIFT 0
-
-/*
- * LCD Pixel Clock Divider Register
- */
-#define LPXCD_ADDR	0xfffffa25
-#define LPXCD		BYTE_REF(LPXCD_ADDR)
-
-#define	LPXCD_PCD_MASK	0x3f 	/* Pixel Clock Divider */
-#define LPXCD_PCD_SHIFT	0
-
-/*
- * LCD Clocking Control Register
- */
-#define LCKCON_ADDR	0xfffffa27
-#define LCKCON		BYTE_REF(LCKCON_ADDR)
-
-#define LCKCON_PCDS	 0x01	/* Pixel Clock Divider Source Select */
-#define LCKCON_DWIDTH	 0x02	/* Display Memory Width  */
-#define LCKCON_DWS_MASK	 0x3c	/* Display Wait-State */
-#define LCKCON_DWS_SHIFT 2
-#define LCKCON_DMA16	 0x40	/* DMA burst length */
-#define LCKCON_LCDON	 0x80	/* Enable LCD Controller */
-
-/* 'EZ328-compatible definitions */
-#define LCKCON_DW_MASK	LCKCON_DWS_MASK
-#define LCKCON_DW_SHIFT	LCKCON_DWS_SHIFT
-
-/*
- * LCD Last Buffer Address Register
- */
-#define LLBAR_ADDR	0xfffffa29
-#define LLBAR		BYTE_REF(LLBAR_ADDR)
-
-#define LLBAR_LBAR_MASK	 0x7f	/* Number of memory words to fill 1 line */
-#define LLBAR_LBAR_SHIFT 0
-
-/*
- * LCD Octet Terminal Count Register 
- */
-#define LOTCR_ADDR	0xfffffa2b
-#define LOTCR		BYTE_REF(LOTCR_ADDR)
-
-/*
- * LCD Panning Offset Register
- */
-#define LPOSR_ADDR	0xfffffa2d
-#define LPOSR		BYTE_REF(LPOSR_ADDR)
-
-#define LPOSR_BOS	0x08	/* Byte offset (for B/W mode only */
-#define LPOSR_POS_MASK	0x07	/* Pixel Offset Code */
-#define LPOSR_POS_SHIFT	0
-
-/*
- * LCD Frame Rate Control Modulation Register
- */
-#define LFRCM_ADDR	0xfffffa31
-#define LFRCM		BYTE_REF(LFRCM_ADDR)
-
-#define LFRCM_YMOD_MASK	 0x0f	/* Vertical Modulation */
-#define LFRCM_YMOD_SHIFT 0
-#define LFRCM_XMOD_MASK	 0xf0	/* Horizontal Modulation */
-#define LFRCM_XMOD_SHIFT 4
-
-/*
- * LCD Gray Palette Mapping Register
- */
-#define LGPMR_ADDR	0xfffffa32
-#define LGPMR		WORD_REF(LGPMR_ADDR)
-
-#define LGPMR_GLEVEL3_MASK	0x000f
-#define LGPMR_GLEVEL3_SHIFT	0 
-#define LGPMR_GLEVEL2_MASK	0x00f0
-#define LGPMR_GLEVEL2_SHIFT	4 
-#define LGPMR_GLEVEL0_MASK	0x0f00
-#define LGPMR_GLEVEL0_SHIFT	8 
-#define LGPMR_GLEVEL1_MASK	0xf000
-#define LGPMR_GLEVEL1_SHIFT	12
-
-/**********
- *
- * 0xFFFFFBxx -- Real-Time Clock (RTC)
- *
- **********/
-
-/*
- * RTC Hours Minutes and Seconds Register
- */
-#define RTCTIME_ADDR	0xfffffb00
-#define RTCTIME		LONG_REF(RTCTIME_ADDR)
-
-#define RTCTIME_SECONDS_MASK	0x0000003f	/* Seconds */
-#define RTCTIME_SECONDS_SHIFT	0
-#define RTCTIME_MINUTES_MASK	0x003f0000	/* Minutes */
-#define RTCTIME_MINUTES_SHIFT	16
-#define RTCTIME_HOURS_MASK	0x1f000000	/* Hours */
-#define RTCTIME_HOURS_SHIFT	24
-
-/*
- *  RTC Alarm Register 
- */
-#define RTCALRM_ADDR    0xfffffb04
-#define RTCALRM         LONG_REF(RTCALRM_ADDR)
-
-#define RTCALRM_SECONDS_MASK    0x0000003f      /* Seconds */
-#define RTCALRM_SECONDS_SHIFT   0
-#define RTCALRM_MINUTES_MASK    0x003f0000      /* Minutes */
-#define RTCALRM_MINUTES_SHIFT   16
-#define RTCALRM_HOURS_MASK      0x1f000000      /* Hours */
-#define RTCALRM_HOURS_SHIFT     24
-
-/*
- * RTC Control Register
- */
-#define RTCCTL_ADDR	0xfffffb0c
-#define RTCCTL		WORD_REF(RTCCTL_ADDR)
-
-#define RTCCTL_384	0x0020	/* Crystal Selection */
-#define RTCCTL_ENABLE	0x0080	/* RTC Enable */
-
-/* 'EZ328-compatible definitions */
-#define RTCCTL_XTL	RTCCTL_384
-#define RTCCTL_EN	RTCCTL_ENABLE
-
-/*
- * RTC Interrupt Status Register 
- */
-#define RTCISR_ADDR	0xfffffb0e
-#define RTCISR		WORD_REF(RTCISR_ADDR)
-
-#define RTCISR_SW	0x0001	/* Stopwatch timed out */
-#define RTCISR_MIN	0x0002	/* 1-minute interrupt has occurred */
-#define RTCISR_ALM	0x0004	/* Alarm interrupt has occurred */
-#define RTCISR_DAY	0x0008	/* 24-hour rollover interrupt has occurred */
-#define RTCISR_1HZ	0x0010	/* 1Hz interrupt has occurred */
-
-/*
- * RTC Interrupt Enable Register
- */
-#define RTCIENR_ADDR	0xfffffb10
-#define RTCIENR		WORD_REF(RTCIENR_ADDR)
-
-#define RTCIENR_SW	0x0001	/* Stopwatch interrupt enable */
-#define RTCIENR_MIN	0x0002	/* 1-minute interrupt enable */
-#define RTCIENR_ALM	0x0004	/* Alarm interrupt enable */
-#define RTCIENR_DAY	0x0008	/* 24-hour rollover interrupt enable */
-#define RTCIENR_1HZ	0x0010	/* 1Hz interrupt enable */
-
-/* 
- * Stopwatch Minutes Register
- */
-#define STPWCH_ADDR	0xfffffb12
-#define STPWCH		WORD_REF(STPWCH)
-
-#define STPWCH_CNT_MASK	 0x00ff	/* Stopwatch countdown value */
-#define SPTWCH_CNT_SHIFT 0
-
-#endif /* _MC68328_H_ */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/MC68332.h b/ANDROID_3.4.5/arch/m68k/include/asm/MC68332.h
deleted file mode 100644
index 6bb8f026..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/MC68332.h
+++ /dev/null
@@ -1,152 +0,0 @@
-
-/* include/asm-m68knommu/MC68332.h: '332 control registers
- *
- * Copyright (C) 1998  Kenneth Albanowski <kjahds@kjahds.com>,
- *
- */
-
-#ifndef _MC68332_H_
-#define _MC68332_H_
-
-#define BYTE_REF(addr) (*((volatile unsigned char*)addr))
-#define WORD_REF(addr) (*((volatile unsigned short*)addr))
-
-#define PORTE_ADDR	0xfffa11
-#define PORTE	BYTE_REF(PORTE_ADDR)
-#define DDRE_ADDR	0xfffa15
-#define DDRE	BYTE_REF(DDRE_ADDR)
-#define PEPAR_ADDR	0xfffa17
-#define PEPAR	BYTE_REF(PEPAR_ADDR)
-
-#define PORTF_ADDR	0xfffa19
-#define PORTF	BYTE_REF(PORTF_ADDR)
-#define DDRF_ADDR	0xfffa1d
-#define DDRF	BYTE_REF(DDRF_ADDR)
-#define PFPAR_ADDR	0xfffa1f
-#define PFPAR	BYTE_REF(PFPAR_ADDR)
-
-#define PORTQS_ADDR	0xfffc15
-#define PORTQS	BYTE_REF(PORTQS_ADDR)
-#define DDRQS_ADDR	0xfffc17
-#define DDRQS	BYTE_REF(DDRQS_ADDR)
-#define PQSPAR_ADDR	0xfffc16
-#define PQSPAR	BYTE_REF(PQSPAR_ADDR)
-
-#define CSPAR0_ADDR 0xFFFA44
-#define CSPAR0 WORD_REF(CSPAR0_ADDR)
-#define CSPAR1_ADDR 0xFFFA46
-#define CSPAR1 WORD_REF(CSPAR1_ADDR)
-#define CSARBT_ADDR 0xFFFA48
-#define CSARBT WORD_REF(CSARBT_ADDR)
-#define CSOPBT_ADDR 0xFFFA4A
-#define CSOPBT WORD_REF(CSOPBT_ADDR)
-#define CSBAR0_ADDR 0xFFFA4C
-#define CSBAR0 WORD_REF(CSBAR0_ADDR)
-#define CSOR0_ADDR 0xFFFA4E
-#define CSOR0 WORD_REF(CSOR0_ADDR)
-#define CSBAR1_ADDR 0xFFFA50
-#define CSBAR1 WORD_REF(CSBAR1_ADDR)
-#define CSOR1_ADDR 0xFFFA52
-#define CSOR1 WORD_REF(CSOR1_ADDR)
-#define CSBAR2_ADDR 0xFFFA54
-#define CSBAR2 WORD_REF(CSBAR2_ADDR)
-#define CSOR2_ADDR 0xFFFA56
-#define CSOR2 WORD_REF(CSOR2_ADDR)
-#define CSBAR3_ADDR 0xFFFA58
-#define CSBAR3 WORD_REF(CSBAR3_ADDR)
-#define CSOR3_ADDR 0xFFFA5A
-#define CSOR3 WORD_REF(CSOR3_ADDR)
-#define CSBAR4_ADDR 0xFFFA5C
-#define CSBAR4 WORD_REF(CSBAR4_ADDR)
-#define CSOR4_ADDR 0xFFFA5E
-#define CSOR4 WORD_REF(CSOR4_ADDR)
-#define CSBAR5_ADDR 0xFFFA60
-#define CSBAR5 WORD_REF(CSBAR5_ADDR)
-#define CSOR5_ADDR 0xFFFA62
-#define CSOR5 WORD_REF(CSOR5_ADDR)
-#define CSBAR6_ADDR 0xFFFA64
-#define CSBAR6 WORD_REF(CSBAR6_ADDR)
-#define CSOR6_ADDR 0xFFFA66
-#define CSOR6 WORD_REF(CSOR6_ADDR)
-#define CSBAR7_ADDR 0xFFFA68
-#define CSBAR7 WORD_REF(CSBAR7_ADDR)
-#define CSOR7_ADDR 0xFFFA6A
-#define CSOR7 WORD_REF(CSOR7_ADDR)
-#define CSBAR8_ADDR 0xFFFA6C
-#define CSBAR8 WORD_REF(CSBAR8_ADDR)
-#define CSOR8_ADDR 0xFFFA6E
-#define CSOR8 WORD_REF(CSOR8_ADDR)
-#define CSBAR9_ADDR 0xFFFA70
-#define CSBAR9 WORD_REF(CSBAR9_ADDR)
-#define CSOR9_ADDR 0xFFFA72
-#define CSOR9 WORD_REF(CSOR9_ADDR)
-#define CSBAR10_ADDR 0xFFFA74
-#define CSBAR10 WORD_REF(CSBAR10_ADDR)
-#define CSOR10_ADDR 0xFFFA76
-#define CSOR10 WORD_REF(CSOR10_ADDR)
-
-#define CSOR_MODE_ASYNC	0x0000
-#define CSOR_MODE_SYNC	0x8000
-#define CSOR_MODE_MASK	0x8000
-#define CSOR_BYTE_DISABLE	0x0000
-#define CSOR_BYTE_UPPER		0x4000
-#define CSOR_BYTE_LOWER		0x2000
-#define CSOR_BYTE_BOTH		0x6000
-#define CSOR_BYTE_MASK		0x6000
-#define CSOR_RW_RSVD		0x0000
-#define CSOR_RW_READ		0x0800
-#define CSOR_RW_WRITE		0x1000
-#define CSOR_RW_BOTH		0x1800
-#define CSOR_RW_MASK		0x1800
-#define CSOR_STROBE_DS		0x0400
-#define CSOR_STROBE_AS		0x0000
-#define CSOR_STROBE_MASK	0x0400
-#define CSOR_DSACK_WAIT(x)	(wait << 6)
-#define CSOR_DSACK_FTERM	(14 << 6)
-#define CSOR_DSACK_EXTERNAL	(15 << 6)
-#define CSOR_DSACK_MASK		0x03c0
-#define CSOR_SPACE_CPU		0x0000
-#define CSOR_SPACE_USER		0x0010
-#define CSOR_SPACE_SU		0x0020
-#define CSOR_SPACE_BOTH		0x0030
-#define CSOR_SPACE_MASK		0x0030
-#define CSOR_IPL_ALL		0x0000
-#define CSOR_IPL_PRIORITY(x)	(x << 1)
-#define CSOR_IPL_MASK		0x000e
-#define CSOR_AVEC_ON		0x0001
-#define CSOR_AVEC_OFF		0x0000
-#define CSOR_AVEC_MASK		0x0001
-
-#define CSBAR_ADDR(x)		((addr >> 11) << 3) 
-#define CSBAR_ADDR_MASK		0xfff8
-#define CSBAR_BLKSIZE_2K	0x0000
-#define CSBAR_BLKSIZE_8K	0x0001
-#define CSBAR_BLKSIZE_16K	0x0002
-#define CSBAR_BLKSIZE_64K	0x0003
-#define CSBAR_BLKSIZE_128K	0x0004
-#define CSBAR_BLKSIZE_256K	0x0005
-#define CSBAR_BLKSIZE_512K	0x0006
-#define CSBAR_BLKSIZE_1M	0x0007
-#define CSBAR_BLKSIZE_MASK	0x0007
-
-#define CSPAR_DISC	0
-#define CSPAR_ALT	1
-#define CSPAR_CS8	2
-#define CSPAR_CS16	3
-#define CSPAR_MASK	3
-
-#define CSPAR0_CSBOOT(x) (x << 0)
-#define CSPAR0_CS0(x)	(x << 2)
-#define CSPAR0_CS1(x)	(x << 4)
-#define CSPAR0_CS2(x)	(x << 6)
-#define CSPAR0_CS3(x)	(x << 8)
-#define CSPAR0_CS4(x)	(x << 10)
-#define CSPAR0_CS5(x)	(x << 12)
-
-#define CSPAR1_CS6(x)	(x << 0)
-#define CSPAR1_CS7(x)	(x << 2)
-#define CSPAR1_CS8(x)	(x << 4)
-#define CSPAR1_CS9(x)	(x << 6)
-#define CSPAR1_CS10(x)	(x << 8)
-
-#endif
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/MC68EZ328.h b/ANDROID_3.4.5/arch/m68k/include/asm/MC68EZ328.h
deleted file mode 100644
index d1bde58a..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/MC68EZ328.h
+++ /dev/null
@@ -1,1253 +0,0 @@
-
-/* include/asm-m68knommu/MC68EZ328.h: 'EZ328 control registers
- *
- * Copyright (C) 1999  Vladimir Gurevich <vgurevic@cisco.com>
- *                     Bear & Hare Software, Inc.
- *
- * Based on include/asm-m68knommu/MC68332.h
- * Copyright (C) 1998  Kenneth Albanowski <kjahds@kjahds.com>,
- *                     The Silver Hammer Group, Ltd.
- *
- */
-
-#ifndef _MC68EZ328_H_
-#define _MC68EZ328_H_
-
-#define BYTE_REF(addr) (*((volatile unsigned char*)addr))
-#define WORD_REF(addr) (*((volatile unsigned short*)addr))
-#define LONG_REF(addr) (*((volatile unsigned long*)addr))
-
-#define PUT_FIELD(field, val) (((val) << field##_SHIFT) & field##_MASK)
-#define GET_FIELD(reg, field) (((reg) & field##_MASK) >> field##_SHIFT)
-
-/********** 
- *
- * 0xFFFFF0xx -- System Control
- *
- **********/
- 
-/*
- * System Control Register (SCR)
- */
-#define SCR_ADDR	0xfffff000
-#define SCR		BYTE_REF(SCR_ADDR)
-
-#define SCR_WDTH8	0x01	/* 8-Bit Width Select */
-#define SCR_DMAP	0x04	/* Double Map */
-#define SCR_SO		0x08	/* Supervisor Only */
-#define SCR_BETEN	0x10	/* Bus-Error Time-Out Enable */
-#define SCR_PRV		0x20	/* Privilege Violation */
-#define SCR_WPV		0x40	/* Write Protect Violation */
-#define SCR_BETO	0x80	/* Bus-Error TimeOut */
-
-/*
- * Silicon ID Register (Mask Revision Register (MRR) for '328 Compatibility)
- */
-#define MRR_ADDR 0xfffff004
-#define MRR	 LONG_REF(MRR_ADDR)
-
-/********** 
- *
- * 0xFFFFF1xx -- Chip-Select logic
- *
- **********/
- 
-/*
- * Chip Select Group Base Registers 
- */
-#define CSGBA_ADDR	0xfffff100
-#define CSGBB_ADDR	0xfffff102
-
-#define CSGBC_ADDR	0xfffff104
-#define CSGBD_ADDR	0xfffff106
-
-#define CSGBA		WORD_REF(CSGBA_ADDR)
-#define CSGBB		WORD_REF(CSGBB_ADDR)
-#define CSGBC		WORD_REF(CSGBC_ADDR)
-#define CSGBD		WORD_REF(CSGBD_ADDR)
-
-/*
- * Chip Select Registers 
- */
-#define CSA_ADDR	0xfffff110
-#define CSB_ADDR	0xfffff112
-#define CSC_ADDR	0xfffff114
-#define CSD_ADDR	0xfffff116
-
-#define CSA		WORD_REF(CSA_ADDR)
-#define CSB		WORD_REF(CSB_ADDR)
-#define CSC		WORD_REF(CSC_ADDR)
-#define CSD		WORD_REF(CSD_ADDR)
-
-#define CSA_EN		0x0001		/* Chip-Select Enable */
-#define CSA_SIZ_MASK	0x000e		/* Chip-Select Size */
-#define CSA_SIZ_SHIFT   1
-#define CSA_WS_MASK	0x0070		/* Wait State */
-#define CSA_WS_SHIFT    4
-#define CSA_BSW		0x0080		/* Data Bus Width */
-#define CSA_FLASH	0x0100		/* FLASH Memory Support */
-#define CSA_RO		0x8000		/* Read-Only */
-
-#define CSB_EN		0x0001		/* Chip-Select Enable */
-#define CSB_SIZ_MASK	0x000e		/* Chip-Select Size */
-#define CSB_SIZ_SHIFT   1
-#define CSB_WS_MASK	0x0070		/* Wait State */
-#define CSB_WS_SHIFT    4
-#define CSB_BSW		0x0080		/* Data Bus Width */
-#define CSB_FLASH	0x0100		/* FLASH Memory Support */
-#define CSB_UPSIZ_MASK	0x1800		/* Unprotected memory block size */
-#define CSB_UPSIZ_SHIFT 11
-#define CSB_ROP		0x2000		/* Readonly if protected */
-#define CSB_SOP		0x4000		/* Supervisor only if protected */
-#define CSB_RO		0x8000		/* Read-Only */
-
-#define CSC_EN		0x0001		/* Chip-Select Enable */
-#define CSC_SIZ_MASK	0x000e		/* Chip-Select Size */
-#define CSC_SIZ_SHIFT   1
-#define CSC_WS_MASK	0x0070		/* Wait State */
-#define CSC_WS_SHIFT    4
-#define CSC_BSW		0x0080		/* Data Bus Width */
-#define CSC_FLASH	0x0100		/* FLASH Memory Support */
-#define CSC_UPSIZ_MASK	0x1800		/* Unprotected memory block size */
-#define CSC_UPSIZ_SHIFT 11
-#define CSC_ROP		0x2000		/* Readonly if protected */
-#define CSC_SOP		0x4000		/* Supervisor only if protected */
-#define CSC_RO		0x8000		/* Read-Only */
-
-#define CSD_EN		0x0001		/* Chip-Select Enable */
-#define CSD_SIZ_MASK	0x000e		/* Chip-Select Size */
-#define CSD_SIZ_SHIFT   1
-#define CSD_WS_MASK	0x0070		/* Wait State */
-#define CSD_WS_SHIFT    4
-#define CSD_BSW		0x0080		/* Data Bus Width */
-#define CSD_FLASH	0x0100		/* FLASH Memory Support */
-#define CSD_DRAM	0x0200		/* Dram Selection */
-#define	CSD_COMB	0x0400		/* Combining */
-#define CSD_UPSIZ_MASK	0x1800		/* Unprotected memory block size */
-#define CSD_UPSIZ_SHIFT 11
-#define CSD_ROP		0x2000		/* Readonly if protected */
-#define CSD_SOP		0x4000		/* Supervisor only if protected */
-#define CSD_RO		0x8000		/* Read-Only */
-
-/*
- * Emulation Chip-Select Register 
- */
-#define EMUCS_ADDR	0xfffff118
-#define EMUCS		WORD_REF(EMUCS_ADDR)
-
-#define EMUCS_WS_MASK	0x0070
-#define EMUCS_WS_SHIFT	4
-
-/********** 
- *
- * 0xFFFFF2xx -- Phase Locked Loop (PLL) & Power Control
- *
- **********/
-
-/*
- * PLL Control Register 
- */
-#define PLLCR_ADDR	0xfffff200
-#define PLLCR		WORD_REF(PLLCR_ADDR)
-
-#define PLLCR_DISPLL	       0x0008	/* Disable PLL */
-#define PLLCR_CLKEN	       0x0010	/* Clock (CLKO pin) enable */
-#define PLLCR_PRESC	       0x0020	/* VCO prescaler */
-#define PLLCR_SYSCLK_SEL_MASK  0x0700	/* System Clock Selection */
-#define PLLCR_SYSCLK_SEL_SHIFT 8
-#define PLLCR_LCDCLK_SEL_MASK  0x3800	/* LCD Clock Selection */
-#define PLLCR_LCDCLK_SEL_SHIFT 11
-
-/* '328-compatible definitions */
-#define PLLCR_PIXCLK_SEL_MASK	PLLCR_LCDCLK_SEL_MASK
-#define PLLCR_PIXCLK_SEL_SHIFT	PLLCR_LCDCLK_SEL_SHIFT
-
-/*
- * PLL Frequency Select Register
- */
-#define PLLFSR_ADDR	0xfffff202
-#define PLLFSR		WORD_REF(PLLFSR_ADDR)
-
-#define PLLFSR_PC_MASK	0x00ff		/* P Count */
-#define PLLFSR_PC_SHIFT 0
-#define PLLFSR_QC_MASK	0x0f00		/* Q Count */
-#define PLLFSR_QC_SHIFT 8
-#define PLLFSR_PROT	0x4000		/* Protect P & Q */
-#define PLLFSR_CLK32	0x8000		/* Clock 32 (kHz) */
-
-/*
- * Power Control Register
- */
-#define PCTRL_ADDR	0xfffff207
-#define PCTRL		BYTE_REF(PCTRL_ADDR)
-
-#define PCTRL_WIDTH_MASK	0x1f	/* CPU Clock bursts width */
-#define PCTRL_WIDTH_SHIFT	0
-#define PCTRL_PCEN		0x80	/* Power Control Enable */
-
-/**********
- *
- * 0xFFFFF3xx -- Interrupt Controller
- *
- **********/
-
-/* 
- * Interrupt Vector Register
- */
-#define IVR_ADDR	0xfffff300
-#define IVR		BYTE_REF(IVR_ADDR)
-
-#define IVR_VECTOR_MASK 0xF8
-
-/*
- * Interrupt control Register
- */
-#define ICR_ADDR	0xfffff302
-#define ICR		WORD_REF(ICR_ADDR)
-
-#define ICR_POL5	0x0080	/* Polarity Control for IRQ5 */
-#define ICR_ET6		0x0100	/* Edge Trigger Select for IRQ6 */
-#define ICR_ET3		0x0200	/* Edge Trigger Select for IRQ3 */
-#define ICR_ET2		0x0400	/* Edge Trigger Select for IRQ2 */
-#define ICR_ET1		0x0800	/* Edge Trigger Select for IRQ1 */
-#define ICR_POL6	0x1000	/* Polarity Control for IRQ6 */
-#define ICR_POL3	0x2000	/* Polarity Control for IRQ3 */
-#define ICR_POL2	0x4000	/* Polarity Control for IRQ2 */
-#define ICR_POL1	0x8000	/* Polarity Control for IRQ1 */
-
-/*
- * Interrupt Mask Register
- */
-#define IMR_ADDR	0xfffff304
-#define IMR		LONG_REF(IMR_ADDR)
-
-/*
- * Define the names for bit positions first. This is useful for 
- * request_irq
- */
-#define SPI_IRQ_NUM	0	/* SPI interrupt */
-#define TMR_IRQ_NUM	1	/* Timer interrupt */
-#define UART_IRQ_NUM	2	/* UART interrupt */	
-#define	WDT_IRQ_NUM	3	/* Watchdog Timer interrupt */
-#define RTC_IRQ_NUM	4	/* RTC interrupt */
-#define	KB_IRQ_NUM	6	/* Keyboard Interrupt */
-#define PWM_IRQ_NUM	7	/* Pulse-Width Modulator int. */
-#define	INT0_IRQ_NUM	8	/* External INT0 */
-#define	INT1_IRQ_NUM	9	/* External INT1 */
-#define	INT2_IRQ_NUM	10	/* External INT2 */
-#define	INT3_IRQ_NUM	11	/* External INT3 */
-#define IRQ1_IRQ_NUM	16	/* IRQ1 */
-#define IRQ2_IRQ_NUM	17	/* IRQ2 */
-#define IRQ3_IRQ_NUM	18	/* IRQ3 */
-#define IRQ6_IRQ_NUM	19	/* IRQ6 */
-#define IRQ5_IRQ_NUM	20	/* IRQ5 */
-#define SAM_IRQ_NUM	22	/* Sampling Timer for RTC */
-#define EMIQ_IRQ_NUM	23	/* Emulator Interrupt */
-
-/* '328-compatible definitions */
-#define SPIM_IRQ_NUM	SPI_IRQ_NUM
-#define TMR1_IRQ_NUM	TMR_IRQ_NUM
-
-/* 
- * Here go the bitmasks themselves
- */
-#define IMR_MSPI 	(1 << SPI_IRQ_NUM)	/* Mask SPI interrupt */
-#define	IMR_MTMR	(1 << TMR_IRQ_NUM)	/* Mask Timer interrupt */
-#define IMR_MUART	(1 << UART_IRQ_NUM)	/* Mask UART interrupt */	
-#define	IMR_MWDT	(1 << WDT_IRQ_NUM)	/* Mask Watchdog Timer interrupt */
-#define IMR_MRTC	(1 << RTC_IRQ_NUM)	/* Mask RTC interrupt */
-#define	IMR_MKB		(1 << KB_IRQ_NUM)	/* Mask Keyboard Interrupt */
-#define IMR_MPWM	(1 << PWM_IRQ_NUM)	/* Mask Pulse-Width Modulator int. */
-#define	IMR_MINT0	(1 << INT0_IRQ_NUM)	/* Mask External INT0 */
-#define	IMR_MINT1	(1 << INT1_IRQ_NUM)	/* Mask External INT1 */
-#define	IMR_MINT2	(1 << INT2_IRQ_NUM)	/* Mask External INT2 */
-#define	IMR_MINT3	(1 << INT3_IRQ_NUM)	/* Mask External INT3 */
-#define IMR_MIRQ1	(1 << IRQ1_IRQ_NUM)	/* Mask IRQ1 */
-#define IMR_MIRQ2	(1 << IRQ2_IRQ_NUM)	/* Mask IRQ2 */
-#define IMR_MIRQ3	(1 << IRQ3_IRQ_NUM)	/* Mask IRQ3 */
-#define IMR_MIRQ6	(1 << IRQ6_IRQ_NUM)	/* Mask IRQ6 */
-#define IMR_MIRQ5	(1 << IRQ5_IRQ_NUM)	/* Mask IRQ5 */
-#define IMR_MSAM	(1 << SAM_IRQ_NUM)	/* Mask Sampling Timer for RTC */
-#define IMR_MEMIQ	(1 << EMIQ_IRQ_NUM)	/* Mask Emulator Interrupt */
-
-/* '328-compatible definitions */
-#define IMR_MSPIM	IMR_MSPI
-#define IMR_MTMR1	IMR_MTMR
-
-/* 
- * Interrupt Status Register 
- */
-#define ISR_ADDR	0xfffff30c
-#define ISR		LONG_REF(ISR_ADDR)
-
-#define ISR_SPI 	(1 << SPI_IRQ_NUM)	/* SPI interrupt */
-#define	ISR_TMR		(1 << TMR_IRQ_NUM)	/* Timer interrupt */
-#define ISR_UART	(1 << UART_IRQ_NUM)	/* UART interrupt */	
-#define	ISR_WDT		(1 << WDT_IRQ_NUM)	/* Watchdog Timer interrupt */
-#define ISR_RTC		(1 << RTC_IRQ_NUM)	/* RTC interrupt */
-#define	ISR_KB		(1 << KB_IRQ_NUM)	/* Keyboard Interrupt */
-#define ISR_PWM		(1 << PWM_IRQ_NUM)	/* Pulse-Width Modulator interrupt */
-#define	ISR_INT0	(1 << INT0_IRQ_NUM)	/* External INT0 */
-#define	ISR_INT1	(1 << INT1_IRQ_NUM)	/* External INT1 */
-#define	ISR_INT2	(1 << INT2_IRQ_NUM)	/* External INT2 */
-#define	ISR_INT3	(1 << INT3_IRQ_NUM)	/* External INT3 */
-#define ISR_IRQ1	(1 << IRQ1_IRQ_NUM)	/* IRQ1 */
-#define ISR_IRQ2	(1 << IRQ2_IRQ_NUM)	/* IRQ2 */
-#define ISR_IRQ3	(1 << IRQ3_IRQ_NUM)	/* IRQ3 */
-#define ISR_IRQ6	(1 << IRQ6_IRQ_NUM)	/* IRQ6 */
-#define ISR_IRQ5	(1 << IRQ5_IRQ_NUM)	/* IRQ5 */
-#define ISR_SAM		(1 << SAM_IRQ_NUM)	/* Sampling Timer for RTC */
-#define ISR_EMIQ	(1 << EMIQ_IRQ_NUM)	/* Emulator Interrupt */
-
-/* '328-compatible definitions */
-#define ISR_SPIM	ISR_SPI
-#define ISR_TMR1	ISR_TMR
-
-/* 
- * Interrupt Pending Register 
- */
-#define IPR_ADDR	0xfffff30c
-#define IPR		LONG_REF(IPR_ADDR)
-
-#define IPR_SPI 	(1 << SPI_IRQ_NUM)	/* SPI interrupt */
-#define	IPR_TMR		(1 << TMR_IRQ_NUM)	/* Timer interrupt */
-#define IPR_UART	(1 << UART_IRQ_NUM)	/* UART interrupt */	
-#define	IPR_WDT		(1 << WDT_IRQ_NUM)	/* Watchdog Timer interrupt */
-#define IPR_RTC		(1 << RTC_IRQ_NUM)	/* RTC interrupt */
-#define	IPR_KB		(1 << KB_IRQ_NUM)	/* Keyboard Interrupt */
-#define IPR_PWM		(1 << PWM_IRQ_NUM)	/* Pulse-Width Modulator interrupt */
-#define	IPR_INT0	(1 << INT0_IRQ_NUM)	/* External INT0 */
-#define	IPR_INT1	(1 << INT1_IRQ_NUM)	/* External INT1 */
-#define	IPR_INT2	(1 << INT2_IRQ_NUM)	/* External INT2 */
-#define	IPR_INT3	(1 << INT3_IRQ_NUM)	/* External INT3 */
-#define IPR_IRQ1	(1 << IRQ1_IRQ_NUM)	/* IRQ1 */
-#define IPR_IRQ2	(1 << IRQ2_IRQ_NUM)	/* IRQ2 */
-#define IPR_IRQ3	(1 << IRQ3_IRQ_NUM)	/* IRQ3 */
-#define IPR_IRQ6	(1 << IRQ6_IRQ_NUM)	/* IRQ6 */
-#define IPR_IRQ5	(1 << IRQ5_IRQ_NUM)	/* IRQ5 */
-#define IPR_SAM		(1 << SAM_IRQ_NUM)	/* Sampling Timer for RTC */
-#define IPR_EMIQ	(1 << EMIQ_IRQ_NUM)	/* Emulator Interrupt */
-
-/* '328-compatible definitions */
-#define IPR_SPIM	IPR_SPI
-#define IPR_TMR1	IPR_TMR
-
-/**********
- *
- * 0xFFFFF4xx -- Parallel Ports
- *
- **********/
-
-/*
- * Port A
- */
-#define PADIR_ADDR	0xfffff400		/* Port A direction reg */
-#define PADATA_ADDR	0xfffff401		/* Port A data register */
-#define PAPUEN_ADDR	0xfffff402		/* Port A Pull-Up enable reg */
-
-#define PADIR		BYTE_REF(PADIR_ADDR)
-#define PADATA		BYTE_REF(PADATA_ADDR)
-#define PAPUEN		BYTE_REF(PAPUEN_ADDR)
-
-#define PA(x)		(1 << (x))
-
-/* 
- * Port B
- */
-#define PBDIR_ADDR	0xfffff408		/* Port B direction reg */
-#define PBDATA_ADDR	0xfffff409		/* Port B data register */
-#define PBPUEN_ADDR	0xfffff40a		/* Port B Pull-Up enable reg */
-#define PBSEL_ADDR	0xfffff40b		/* Port B Select Register */
-
-#define PBDIR		BYTE_REF(PBDIR_ADDR)
-#define PBDATA		BYTE_REF(PBDATA_ADDR)
-#define PBPUEN		BYTE_REF(PBPUEN_ADDR)
-#define PBSEL		BYTE_REF(PBSEL_ADDR)
-
-#define PB(x)		(1 << (x))
-
-#define PB_CSB0		0x01	/* Use CSB0      as PB[0] */
-#define PB_CSB1		0x02	/* Use CSB1      as PB[1] */
-#define PB_CSC0_RAS0	0x04    /* Use CSC0/RAS0 as PB[2] */	
-#define PB_CSC1_RAS1	0x08    /* Use CSC1/RAS1 as PB[3] */	
-#define PB_CSD0_CAS0	0x10    /* Use CSD0/CAS0 as PB[4] */	
-#define PB_CSD1_CAS1	0x20    /* Use CSD1/CAS1 as PB[5] */
-#define PB_TIN_TOUT	0x40	/* Use TIN/TOUT  as PB[6] */
-#define PB_PWMO		0x80	/* Use PWMO      as PB[7] */
-
-/* 
- * Port C
- */
-#define PCDIR_ADDR	0xfffff410		/* Port C direction reg */
-#define PCDATA_ADDR	0xfffff411		/* Port C data register */
-#define PCPDEN_ADDR	0xfffff412		/* Port C Pull-Down enb. reg */
-#define PCSEL_ADDR	0xfffff413		/* Port C Select Register */
-
-#define PCDIR		BYTE_REF(PCDIR_ADDR)
-#define PCDATA		BYTE_REF(PCDATA_ADDR)
-#define PCPDEN		BYTE_REF(PCPDEN_ADDR)
-#define PCSEL		BYTE_REF(PCSEL_ADDR)
-
-#define PC(x)		(1 << (x))
-
-#define PC_LD0		0x01	/* Use LD0  as PC[0] */
-#define PC_LD1		0x02	/* Use LD1  as PC[1] */
-#define PC_LD2		0x04	/* Use LD2  as PC[2] */
-#define PC_LD3		0x08	/* Use LD3  as PC[3] */
-#define PC_LFLM		0x10	/* Use LFLM as PC[4] */
-#define PC_LLP 		0x20	/* Use LLP  as PC[5] */
-#define PC_LCLK		0x40	/* Use LCLK as PC[6] */
-#define PC_LACD		0x80	/* Use LACD as PC[7] */
-
-/* 
- * Port D
- */
-#define PDDIR_ADDR	0xfffff418		/* Port D direction reg */
-#define PDDATA_ADDR	0xfffff419		/* Port D data register */
-#define PDPUEN_ADDR	0xfffff41a		/* Port D Pull-Up enable reg */
-#define PDSEL_ADDR	0xfffff41b		/* Port D Select Register */
-#define PDPOL_ADDR	0xfffff41c		/* Port D Polarity Register */
-#define PDIRQEN_ADDR	0xfffff41d		/* Port D IRQ enable register */
-#define PDKBEN_ADDR	0xfffff41e		/* Port D Keyboard Enable reg */
-#define	PDIQEG_ADDR	0xfffff41f		/* Port D IRQ Edge Register */
-
-#define PDDIR		BYTE_REF(PDDIR_ADDR)
-#define PDDATA		BYTE_REF(PDDATA_ADDR)
-#define PDPUEN		BYTE_REF(PDPUEN_ADDR)
-#define PDSEL		BYTE_REF(PDSEL_ADDR)
-#define	PDPOL		BYTE_REF(PDPOL_ADDR)
-#define PDIRQEN		BYTE_REF(PDIRQEN_ADDR)
-#define PDKBEN		BYTE_REF(PDKBEN_ADDR)
-#define PDIQEG		BYTE_REF(PDIQEG_ADDR)
-
-#define PD(x)		(1 << (x))
-
-#define PD_INT0		0x01	/* Use INT0 as PD[0] */
-#define PD_INT1		0x02	/* Use INT1 as PD[1] */
-#define PD_INT2		0x04	/* Use INT2 as PD[2] */
-#define PD_INT3		0x08	/* Use INT3 as PD[3] */
-#define PD_IRQ1		0x10	/* Use IRQ1 as PD[4] */
-#define PD_IRQ2		0x20	/* Use IRQ2 as PD[5] */
-#define PD_IRQ3		0x40	/* Use IRQ3 as PD[6] */
-#define PD_IRQ6		0x80	/* Use IRQ6 as PD[7] */
-
-/* 
- * Port E
- */
-#define PEDIR_ADDR	0xfffff420		/* Port E direction reg */
-#define PEDATA_ADDR	0xfffff421		/* Port E data register */
-#define PEPUEN_ADDR	0xfffff422		/* Port E Pull-Up enable reg */
-#define PESEL_ADDR	0xfffff423		/* Port E Select Register */
-
-#define PEDIR		BYTE_REF(PEDIR_ADDR)
-#define PEDATA		BYTE_REF(PEDATA_ADDR)
-#define PEPUEN		BYTE_REF(PEPUEN_ADDR)
-#define PESEL		BYTE_REF(PESEL_ADDR)
-
-#define PE(x)		(1 << (x))
-
-#define PE_SPMTXD	0x01	/* Use SPMTXD as PE[0] */
-#define PE_SPMRXD	0x02	/* Use SPMRXD as PE[1] */
-#define PE_SPMCLK	0x04	/* Use SPMCLK as PE[2] */
-#define PE_DWE		0x08	/* Use DWE    as PE[3] */
-#define PE_RXD		0x10	/* Use RXD    as PE[4] */
-#define PE_TXD		0x20	/* Use TXD    as PE[5] */
-#define PE_RTS		0x40	/* Use RTS    as PE[6] */
-#define PE_CTS		0x80	/* Use CTS    as PE[7] */
-
-/* 
- * Port F
- */
-#define PFDIR_ADDR	0xfffff428		/* Port F direction reg */
-#define PFDATA_ADDR	0xfffff429		/* Port F data register */
-#define PFPUEN_ADDR	0xfffff42a		/* Port F Pull-Up enable reg */
-#define PFSEL_ADDR	0xfffff42b		/* Port F Select Register */
-
-#define PFDIR		BYTE_REF(PFDIR_ADDR)
-#define PFDATA		BYTE_REF(PFDATA_ADDR)
-#define PFPUEN		BYTE_REF(PFPUEN_ADDR)
-#define PFSEL		BYTE_REF(PFSEL_ADDR)
-
-#define PF(x)		(1 << (x))
-
-#define PF_LCONTRAST	0x01	/* Use LCONTRAST as PF[0] */
-#define PF_IRQ5         0x02    /* Use IRQ5      as PF[1] */
-#define PF_CLKO         0x04    /* Use CLKO      as PF[2] */
-#define PF_A20          0x08    /* Use A20       as PF[3] */
-#define PF_A21          0x10    /* Use A21       as PF[4] */
-#define PF_A22          0x20    /* Use A22       as PF[5] */
-#define PF_A23          0x40    /* Use A23       as PF[6] */
-#define PF_CSA1		0x80    /* Use CSA1      as PF[7] */
-
-/* 
- * Port G
- */
-#define PGDIR_ADDR	0xfffff430		/* Port G direction reg */
-#define PGDATA_ADDR	0xfffff431		/* Port G data register */
-#define PGPUEN_ADDR	0xfffff432		/* Port G Pull-Up enable reg */
-#define PGSEL_ADDR	0xfffff433		/* Port G Select Register */
-
-#define PGDIR		BYTE_REF(PGDIR_ADDR)
-#define PGDATA		BYTE_REF(PGDATA_ADDR)
-#define PGPUEN		BYTE_REF(PGPUEN_ADDR)
-#define PGSEL		BYTE_REF(PGSEL_ADDR)
-
-#define PG(x)		(1 << (x))
-
-#define PG_BUSW_DTACK	0x01	/* Use BUSW/DTACK as PG[0] */
-#define PG_A0		0x02	/* Use A0         as PG[1] */
-#define PG_EMUIRQ	0x04	/* Use EMUIRQ     as PG[2] */
-#define PG_HIZ_P_D	0x08	/* Use HIZ/P/D    as PG[3] */
-#define PG_EMUCS        0x10	/* Use EMUCS      as PG[4] */
-#define PG_EMUBRK	0x20	/* Use EMUBRK     as PG[5] */
-
-/**********
- *
- * 0xFFFFF5xx -- Pulse-Width Modulator (PWM)
- *
- **********/
-
-/*
- * PWM Control Register 
- */
-#define PWMC_ADDR	0xfffff500
-#define PWMC		WORD_REF(PWMC_ADDR)
-
-#define PWMC_CLKSEL_MASK	0x0003	/* Clock Selection */
-#define PWMC_CLKSEL_SHIFT	0
-#define PWMC_REPEAT_MASK	0x000c	/* Sample Repeats */
-#define PWMC_REPEAT_SHIFT	2
-#define PWMC_EN			0x0010	/* Enable PWM */
-#define PMNC_FIFOAV		0x0020	/* FIFO Available */
-#define PWMC_IRQEN		0x0040	/* Interrupt Request Enable */
-#define PWMC_IRQ		0x0080	/* Interrupt Request (FIFO empty) */
-#define PWMC_PRESCALER_MASK	0x7f00	/* Incoming Clock prescaler */
-#define PWMC_PRESCALER_SHIFT	8
-#define PWMC_CLKSRC		0x8000	/* Clock Source Select */
-
-/* '328-compatible definitions */
-#define PWMC_PWMEN	PWMC_EN
-
-/*
- * PWM Sample Register 
- */
-#define PWMS_ADDR	0xfffff502
-#define PWMS		WORD_REF(PWMS_ADDR)
-
-/*
- * PWM Period Register
- */
-#define PWMP_ADDR	0xfffff504
-#define PWMP		BYTE_REF(PWMP_ADDR)
-
-/*
- * PWM Counter Register
- */
-#define PWMCNT_ADDR	0xfffff505
-#define PWMCNT		BYTE_REF(PWMCNT_ADDR)
-
-/**********
- *
- * 0xFFFFF6xx -- General-Purpose Timer
- *
- **********/
-
-/* 
- * Timer Control register
- */
-#define TCTL_ADDR	0xfffff600
-#define TCTL		WORD_REF(TCTL_ADDR)
-
-#define	TCTL_TEN		0x0001	/* Timer Enable  */
-#define TCTL_CLKSOURCE_MASK 	0x000e	/* Clock Source: */
-#define   TCTL_CLKSOURCE_STOP	   0x0000	/* Stop count (disabled)    */
-#define   TCTL_CLKSOURCE_SYSCLK	   0x0002	/* SYSCLK to prescaler      */
-#define   TCTL_CLKSOURCE_SYSCLK_16 0x0004	/* SYSCLK/16 to prescaler   */
-#define   TCTL_CLKSOURCE_TIN	   0x0006	/* TIN to prescaler         */
-#define   TCTL_CLKSOURCE_32KHZ	   0x0008	/* 32kHz clock to prescaler */
-#define TCTL_IRQEN		0x0010	/* IRQ Enable    */
-#define TCTL_OM			0x0020	/* Output Mode   */
-#define TCTL_CAP_MASK		0x00c0	/* Capture Edge: */
-#define	  TCTL_CAP_RE		0x0040		/* Capture on rizing edge   */
-#define   TCTL_CAP_FE		0x0080		/* Capture on falling edge  */
-#define TCTL_FRR		0x0010	/* Free-Run Mode */
-
-/* '328-compatible definitions */
-#define TCTL1_ADDR	TCTL_ADDR
-#define TCTL1		TCTL
-
-/*
- * Timer Prescaler Register
- */
-#define TPRER_ADDR	0xfffff602
-#define TPRER		WORD_REF(TPRER_ADDR)
-
-/* '328-compatible definitions */
-#define TPRER1_ADDR	TPRER_ADDR
-#define TPRER1		TPRER
-
-/*
- * Timer Compare Register
- */
-#define TCMP_ADDR	0xfffff604
-#define TCMP		WORD_REF(TCMP_ADDR)
-
-/* '328-compatible definitions */
-#define TCMP1_ADDR	TCMP_ADDR
-#define TCMP1		TCMP
-
-/*
- * Timer Capture register
- */
-#define TCR_ADDR	0xfffff606
-#define TCR		WORD_REF(TCR_ADDR)
-
-/* '328-compatible definitions */
-#define TCR1_ADDR	TCR_ADDR
-#define TCR1		TCR
-
-/*
- * Timer Counter Register
- */
-#define TCN_ADDR	0xfffff608
-#define TCN		WORD_REF(TCN_ADDR)
-
-/* '328-compatible definitions */
-#define TCN1_ADDR	TCN_ADDR
-#define TCN1		TCN
-
-/*
- * Timer Status Register
- */
-#define TSTAT_ADDR	0xfffff60a
-#define TSTAT		WORD_REF(TSTAT_ADDR)
-
-#define TSTAT_COMP	0x0001		/* Compare Event occurred */
-#define TSTAT_CAPT	0x0001		/* Capture Event occurred */
-
-/* '328-compatible definitions */
-#define TSTAT1_ADDR	TSTAT_ADDR
-#define TSTAT1		TSTAT
-
-/**********
- *
- * 0xFFFFF8xx -- Serial Periferial Interface Master (SPIM)
- *
- **********/
-
-/*
- * SPIM Data Register
- */
-#define SPIMDATA_ADDR	0xfffff800
-#define SPIMDATA	WORD_REF(SPIMDATA_ADDR)
-
-/*
- * SPIM Control/Status Register
- */
-#define SPIMCONT_ADDR	0xfffff802
-#define SPIMCONT	WORD_REF(SPIMCONT_ADDR)
-
-#define SPIMCONT_BIT_COUNT_MASK	 0x000f	/* Transfer Length in Bytes */
-#define SPIMCONT_BIT_COUNT_SHIFT 0
-#define SPIMCONT_POL		 0x0010	/* SPMCLK Signel Polarity */
-#define	SPIMCONT_PHA		 0x0020	/* Clock/Data phase relationship */
-#define SPIMCONT_IRQEN		 0x0040 /* IRQ Enable */
-#define SPIMCONT_IRQ		 0x0080	/* Interrupt Request */
-#define SPIMCONT_XCH		 0x0100	/* Exchange */
-#define SPIMCONT_ENABLE		 0x0200	/* Enable SPIM */
-#define SPIMCONT_DATA_RATE_MASK	 0xe000	/* SPIM Data Rate */
-#define SPIMCONT_DATA_RATE_SHIFT 13
-
-/* '328-compatible definitions */
-#define SPIMCONT_SPIMIRQ	SPIMCONT_IRQ
-#define SPIMCONT_SPIMEN		SPIMCONT_ENABLE
-
-/**********
- *
- * 0xFFFFF9xx -- UART
- *
- **********/
-
-/*
- * UART Status/Control Register
- */
-#define USTCNT_ADDR	0xfffff900
-#define USTCNT		WORD_REF(USTCNT_ADDR)
-
-#define USTCNT_TXAE	0x0001	/* Transmitter Available Interrupt Enable */
-#define USTCNT_TXHE	0x0002	/* Transmitter Half Empty Enable */
-#define USTCNT_TXEE	0x0004	/* Transmitter Empty Interrupt Enable */
-#define USTCNT_RXRE	0x0008	/* Receiver Ready Interrupt Enable */
-#define USTCNT_RXHE	0x0010	/* Receiver Half-Full Interrupt Enable */
-#define USTCNT_RXFE	0x0020	/* Receiver Full Interrupt Enable */
-#define USTCNT_CTSD	0x0040	/* CTS Delta Interrupt Enable */
-#define USTCNT_ODEN	0x0080	/* Old Data Interrupt Enable */
-#define USTCNT_8_7	0x0100	/* Eight or seven-bit transmission */
-#define USTCNT_STOP	0x0200	/* Stop bit transmission */
-#define USTCNT_ODD	0x0400	/* Odd Parity */
-#define	USTCNT_PEN	0x0800	/* Parity Enable */
-#define USTCNT_CLKM	0x1000	/* Clock Mode Select */
-#define	USTCNT_TXEN	0x2000	/* Transmitter Enable */
-#define USTCNT_RXEN	0x4000	/* Receiver Enable */
-#define USTCNT_UEN	0x8000	/* UART Enable */
-
-/* '328-compatible definitions */
-#define USTCNT_TXAVAILEN	USTCNT_TXAE
-#define USTCNT_TXHALFEN		USTCNT_TXHE
-#define USTCNT_TXEMPTYEN	USTCNT_TXEE
-#define USTCNT_RXREADYEN	USTCNT_RXRE
-#define USTCNT_RXHALFEN		USTCNT_RXHE
-#define USTCNT_RXFULLEN		USTCNT_RXFE
-#define USTCNT_CTSDELTAEN	USTCNT_CTSD
-#define USTCNT_ODD_EVEN		USTCNT_ODD
-#define USTCNT_PARITYEN		USTCNT_PEN
-#define USTCNT_CLKMODE		USTCNT_CLKM
-#define USTCNT_UARTEN		USTCNT_UEN
-
-/*
- * UART Baud Control Register
- */
-#define UBAUD_ADDR	0xfffff902
-#define UBAUD		WORD_REF(UBAUD_ADDR)
-
-#define UBAUD_PRESCALER_MASK	0x003f	/* Actual divisor is 65 - PRESCALER */
-#define UBAUD_PRESCALER_SHIFT	0
-#define UBAUD_DIVIDE_MASK	0x0700	/* Baud Rate freq. divizor */
-#define UBAUD_DIVIDE_SHIFT	8
-#define UBAUD_BAUD_SRC		0x0800	/* Baud Rate Source */
-#define UBAUD_UCLKDIR		0x2000	/* UCLK Direction */
-
-/*
- * UART Receiver Register 
- */
-#define URX_ADDR	0xfffff904
-#define URX		WORD_REF(URX_ADDR)
-
-#define URX_RXDATA_ADDR	0xfffff905
-#define URX_RXDATA	BYTE_REF(URX_RXDATA_ADDR)
-
-#define URX_RXDATA_MASK	 0x00ff	/* Received data */
-#define URX_RXDATA_SHIFT 0
-#define URX_PARITY_ERROR 0x0100	/* Parity Error */
-#define URX_BREAK	 0x0200	/* Break Detected */
-#define URX_FRAME_ERROR	 0x0400	/* Framing Error */
-#define URX_OVRUN	 0x0800	/* Serial Overrun */
-#define URX_OLD_DATA	 0x1000	/* Old data in FIFO */
-#define URX_DATA_READY	 0x2000	/* Data Ready (FIFO not empty) */
-#define URX_FIFO_HALF	 0x4000 /* FIFO is Half-Full */
-#define URX_FIFO_FULL	 0x8000	/* FIFO is Full */
-
-/*
- * UART Transmitter Register 
- */
-#define UTX_ADDR	0xfffff906
-#define UTX		WORD_REF(UTX_ADDR)
-
-#define UTX_TXDATA_ADDR	0xfffff907
-#define UTX_TXDATA	BYTE_REF(UTX_TXDATA_ADDR)
-
-#define UTX_TXDATA_MASK	 0x00ff	/* Data to be transmitted */
-#define UTX_TXDATA_SHIFT 0
-#define UTX_CTS_DELTA	 0x0100	/* CTS changed */
-#define UTX_CTS_STAT	 0x0200	/* CTS State */
-#define	UTX_BUSY	 0x0400	/* FIFO is busy, sending a character */
-#define	UTX_NOCTS	 0x0800	/* Ignore CTS */
-#define UTX_SEND_BREAK	 0x1000	/* Send a BREAK */
-#define UTX_TX_AVAIL	 0x2000	/* Transmit FIFO has a slot available */
-#define UTX_FIFO_HALF	 0x4000	/* Transmit FIFO is half empty */
-#define UTX_FIFO_EMPTY	 0x8000	/* Transmit FIFO is empty */
-
-/* '328-compatible definitions */
-#define UTX_CTS_STATUS	UTX_CTS_STAT
-#define UTX_IGNORE_CTS	UTX_NOCTS
-
-/*
- * UART Miscellaneous Register 
- */
-#define UMISC_ADDR	0xfffff908
-#define UMISC		WORD_REF(UMISC_ADDR)
-
-#define UMISC_TX_POL	 0x0004	/* Transmit Polarity */
-#define UMISC_RX_POL	 0x0008	/* Receive Polarity */
-#define UMISC_IRDA_LOOP	 0x0010	/* IrDA Loopback Enable */
-#define UMISC_IRDA_EN	 0x0020	/* Infra-Red Enable */
-#define UMISC_RTS	 0x0040	/* Set RTS status */
-#define UMISC_RTSCONT	 0x0080	/* Choose RTS control */
-#define UMISC_IR_TEST	 0x0400	/* IRDA Test Enable */
-#define UMISC_BAUD_RESET 0x0800	/* Reset Baud Rate Generation Counters */
-#define UMISC_LOOP	 0x1000	/* Serial Loopback Enable */
-#define UMISC_FORCE_PERR 0x2000	/* Force Parity Error */
-#define UMISC_CLKSRC	 0x4000	/* Clock Source */
-#define UMISC_BAUD_TEST	 0x8000	/* Enable Baud Test Mode */
-
-/* 
- * UART Non-integer Prescaler Register
- */
-#define NIPR_ADDR	0xfffff90a
-#define NIPR		WORD_REF(NIPR_ADDR)
-
-#define NIPR_STEP_VALUE_MASK	0x00ff	/* NI prescaler step value */
-#define NIPR_STEP_VALUE_SHIFT	0
-#define NIPR_SELECT_MASK	0x0700	/* Tap Selection */
-#define NIPR_SELECT_SHIFT	8
-#define NIPR_PRE_SEL		0x8000	/* Non-integer prescaler select */
-
-
-/* generalization of uart control registers to support multiple ports: */
-typedef volatile struct {
-  volatile unsigned short int ustcnt;
-  volatile unsigned short int ubaud;
-  union {
-    volatile unsigned short int w;
-    struct {
-      volatile unsigned char status;
-      volatile unsigned char rxdata;
-    } b;
-  } urx;
-  union {
-    volatile unsigned short int w;
-    struct {
-      volatile unsigned char status;
-      volatile unsigned char txdata;
-    } b;
-  } utx;
-  volatile unsigned short int umisc;
-  volatile unsigned short int nipr;
-  volatile unsigned short int pad1;
-  volatile unsigned short int pad2;
-} __attribute__((packed)) m68328_uart;
-
-
-/**********
- *
- * 0xFFFFFAxx -- LCD Controller
- *
- **********/
-
-/*
- * LCD Screen Starting Address Register 
- */
-#define LSSA_ADDR	0xfffffa00
-#define LSSA		LONG_REF(LSSA_ADDR)
-
-#define LSSA_SSA_MASK	0x1ffffffe	/* Bits 0 and 29-31 are reserved */
-
-/*
- * LCD Virtual Page Width Register 
- */
-#define LVPW_ADDR	0xfffffa05
-#define LVPW		BYTE_REF(LVPW_ADDR)
-
-/*
- * LCD Screen Width Register (not compatible with '328 !!!) 
- */
-#define LXMAX_ADDR	0xfffffa08
-#define LXMAX		WORD_REF(LXMAX_ADDR)
-
-#define LXMAX_XM_MASK	0x02f0		/* Bits 0-3 and 10-15 are reserved */
-
-/*
- * LCD Screen Height Register
- */
-#define LYMAX_ADDR	0xfffffa0a
-#define LYMAX		WORD_REF(LYMAX_ADDR)
-
-#define LYMAX_YM_MASK	0x01ff		/* Bits 9-15 are reserved */
-
-/*
- * LCD Cursor X Position Register
- */
-#define LCXP_ADDR	0xfffffa18
-#define LCXP		WORD_REF(LCXP_ADDR)
-
-#define LCXP_CC_MASK	0xc000		/* Cursor Control */
-#define   LCXP_CC_TRAMSPARENT	0x0000
-#define   LCXP_CC_BLACK		0x4000
-#define   LCXP_CC_REVERSED	0x8000
-#define   LCXP_CC_WHITE		0xc000
-#define LCXP_CXP_MASK	0x02ff		/* Cursor X position */
-
-/*
- * LCD Cursor Y Position Register
- */
-#define LCYP_ADDR	0xfffffa1a
-#define LCYP		WORD_REF(LCYP_ADDR)
-
-#define LCYP_CYP_MASK	0x01ff		/* Cursor Y Position */
-
-/*
- * LCD Cursor Width and Heigth Register
- */
-#define LCWCH_ADDR	0xfffffa1c
-#define LCWCH		WORD_REF(LCWCH_ADDR)
-
-#define LCWCH_CH_MASK	0x001f		/* Cursor Height */
-#define LCWCH_CH_SHIFT	0
-#define LCWCH_CW_MASK	0x1f00		/* Cursor Width */
-#define LCWCH_CW_SHIFT	8
-
-/*
- * LCD Blink Control Register
- */
-#define LBLKC_ADDR	0xfffffa1f
-#define LBLKC		BYTE_REF(LBLKC_ADDR)
-
-#define LBLKC_BD_MASK	0x7f	/* Blink Divisor */
-#define LBLKC_BD_SHIFT	0
-#define LBLKC_BKEN	0x80	/* Blink Enabled */
-
-/*
- * LCD Panel Interface Configuration Register 
- */
-#define LPICF_ADDR	0xfffffa20
-#define LPICF		BYTE_REF(LPICF_ADDR)
-
-#define LPICF_GS_MASK	 0x03	 /* Gray-Scale Mode */
-#define	  LPICF_GS_BW	   0x00
-#define   LPICF_GS_GRAY_4  0x01
-#define   LPICF_GS_GRAY_16 0x02
-#define LPICF_PBSIZ_MASK 0x0c	/* Panel Bus Width */
-#define   LPICF_PBSIZ_1	   0x00
-#define   LPICF_PBSIZ_2    0x04
-#define   LPICF_PBSIZ_4    0x08
-
-/*
- * LCD Polarity Configuration Register 
- */
-#define LPOLCF_ADDR	0xfffffa21
-#define LPOLCF		BYTE_REF(LPOLCF_ADDR)
-
-#define LPOLCF_PIXPOL	0x01	/* Pixel Polarity */
-#define LPOLCF_LPPOL	0x02	/* Line Pulse Polarity */
-#define LPOLCF_FLMPOL	0x04	/* Frame Marker Polarity */
-#define LPOLCF_LCKPOL	0x08	/* LCD Shift Lock Polarity */
-
-/*
- * LACD (LCD Alternate Crystal Direction) Rate Control Register
- */
-#define LACDRC_ADDR	0xfffffa23
-#define LACDRC		BYTE_REF(LACDRC_ADDR)
-
-#define LACDRC_ACDSLT	 0x80	/* Signal Source Select */
-#define LACDRC_ACD_MASK	 0x0f	/* Alternate Crystal Direction Control */
-#define LACDRC_ACD_SHIFT 0
-
-/*
- * LCD Pixel Clock Divider Register
- */
-#define LPXCD_ADDR	0xfffffa25
-#define LPXCD		BYTE_REF(LPXCD_ADDR)
-
-#define	LPXCD_PCD_MASK	0x3f 	/* Pixel Clock Divider */
-#define LPXCD_PCD_SHIFT	0
-
-/*
- * LCD Clocking Control Register
- */
-#define LCKCON_ADDR	0xfffffa27
-#define LCKCON		BYTE_REF(LCKCON_ADDR)
-
-#define LCKCON_DWS_MASK	 0x0f	/* Display Wait-State */
-#define LCKCON_DWS_SHIFT 0
-#define LCKCON_DWIDTH	 0x40	/* Display Memory Width  */
-#define LCKCON_LCDON	 0x80	/* Enable LCD Controller */
-
-/* '328-compatible definitions */
-#define LCKCON_DW_MASK  LCKCON_DWS_MASK
-#define LCKCON_DW_SHIFT LCKCON_DWS_SHIFT
- 
-/*
- * LCD Refresh Rate Adjustment Register 
- */
-#define LRRA_ADDR	0xfffffa29
-#define LRRA		BYTE_REF(LRRA_ADDR)
-
-/*
- * LCD Panning Offset Register
- */
-#define LPOSR_ADDR	0xfffffa2d
-#define LPOSR		BYTE_REF(LPOSR_ADDR)
-
-#define LPOSR_POS_MASK	0x0f	/* Pixel Offset Code */
-#define LPOSR_POS_SHIFT	0
-
-/*
- * LCD Frame Rate Control Modulation Register
- */
-#define LFRCM_ADDR	0xfffffa31
-#define LFRCM		BYTE_REF(LFRCM_ADDR)
-
-#define LFRCM_YMOD_MASK	 0x0f	/* Vertical Modulation */
-#define LFRCM_YMOD_SHIFT 0
-#define LFRCM_XMOD_MASK	 0xf0	/* Horizontal Modulation */
-#define LFRCM_XMOD_SHIFT 4
-
-/*
- * LCD Gray Palette Mapping Register
- */
-#define LGPMR_ADDR	0xfffffa33
-#define LGPMR		BYTE_REF(LGPMR_ADDR)
-
-#define LGPMR_G1_MASK	0x0f
-#define LGPMR_G1_SHIFT	0
-#define LGPMR_G2_MASK	0xf0
-#define LGPMR_G2_SHIFT	4
-
-/* 
- * PWM Contrast Control Register
- */
-#define PWMR_ADDR	0xfffffa36
-#define PWMR		WORD_REF(PWMR_ADDR)
-
-#define PWMR_PW_MASK	0x00ff	/* Pulse Width */
-#define PWMR_PW_SHIFT	0
-#define PWMR_CCPEN	0x0100	/* Contrast Control Enable */
-#define PWMR_SRC_MASK	0x0600	/* Input Clock Source */
-#define   PWMR_SRC_LINE	  0x0000	/* Line Pulse  */
-#define   PWMR_SRC_PIXEL  0x0200	/* Pixel Clock */
-#define   PWMR_SRC_LCD    0x4000	/* LCD clock   */
-
-/**********
- *
- * 0xFFFFFBxx -- Real-Time Clock (RTC)
- *
- **********/
-
-/*
- * RTC Hours Minutes and Seconds Register
- */
-#define RTCTIME_ADDR	0xfffffb00
-#define RTCTIME		LONG_REF(RTCTIME_ADDR)
-
-#define RTCTIME_SECONDS_MASK	0x0000003f	/* Seconds */
-#define RTCTIME_SECONDS_SHIFT	0
-#define RTCTIME_MINUTES_MASK	0x003f0000	/* Minutes */
-#define RTCTIME_MINUTES_SHIFT	16
-#define RTCTIME_HOURS_MASK	0x1f000000	/* Hours */
-#define RTCTIME_HOURS_SHIFT	24
-
-/*
- *  RTC Alarm Register 
- */
-#define RTCALRM_ADDR    0xfffffb04
-#define RTCALRM         LONG_REF(RTCALRM_ADDR)
-
-#define RTCALRM_SECONDS_MASK    0x0000003f      /* Seconds */
-#define RTCALRM_SECONDS_SHIFT   0
-#define RTCALRM_MINUTES_MASK    0x003f0000      /* Minutes */
-#define RTCALRM_MINUTES_SHIFT   16
-#define RTCALRM_HOURS_MASK      0x1f000000      /* Hours */
-#define RTCALRM_HOURS_SHIFT     24
-
-/*
- * Watchdog Timer Register 
- */
-#define WATCHDOG_ADDR	0xfffffb0a
-#define WATCHDOG	WORD_REF(WATCHDOG_ADDR)
-
-#define WATCHDOG_EN	0x0001	/* Watchdog Enabled */
-#define WATCHDOG_ISEL	0x0002	/* Select the watchdog interrupt */
-#define WATCHDOG_INTF	0x0080	/* Watchdog interrupt occurred */
-#define WATCHDOG_CNT_MASK  0x0300	/* Watchdog Counter */
-#define WATCHDOG_CNT_SHIFT 8
-
-/*
- * RTC Control Register
- */
-#define RTCCTL_ADDR	0xfffffb0c
-#define RTCCTL		WORD_REF(RTCCTL_ADDR)
-
-#define RTCCTL_XTL	0x0020	/* Crystal Selection */
-#define RTCCTL_EN	0x0080	/* RTC Enable */
-
-/* '328-compatible definitions */
-#define RTCCTL_384	RTCCTL_XTL
-#define RTCCTL_ENABLE	RTCCTL_EN
-
-/*
- * RTC Interrupt Status Register 
- */
-#define RTCISR_ADDR	0xfffffb0e
-#define RTCISR		WORD_REF(RTCISR_ADDR)
-
-#define RTCISR_SW	0x0001	/* Stopwatch timed out */
-#define RTCISR_MIN	0x0002	/* 1-minute interrupt has occurred */
-#define RTCISR_ALM	0x0004	/* Alarm interrupt has occurred */
-#define RTCISR_DAY	0x0008	/* 24-hour rollover interrupt has occurred */
-#define RTCISR_1HZ	0x0010	/* 1Hz interrupt has occurred */
-#define RTCISR_HR	0x0020	/* 1-hour interrupt has occurred */
-#define RTCISR_SAM0	0x0100	/*   4Hz /   4.6875Hz interrupt has occurred */ 
-#define RTCISR_SAM1	0x0200	/*   8Hz /   9.3750Hz interrupt has occurred */ 
-#define RTCISR_SAM2	0x0400	/*  16Hz /  18.7500Hz interrupt has occurred */ 
-#define RTCISR_SAM3	0x0800	/*  32Hz /  37.5000Hz interrupt has occurred */ 
-#define RTCISR_SAM4	0x1000	/*  64Hz /  75.0000Hz interrupt has occurred */ 
-#define RTCISR_SAM5	0x2000	/* 128Hz / 150.0000Hz interrupt has occurred */ 
-#define RTCISR_SAM6	0x4000	/* 256Hz / 300.0000Hz interrupt has occurred */ 
-#define RTCISR_SAM7	0x8000	/* 512Hz / 600.0000Hz interrupt has occurred */ 
-
-/*
- * RTC Interrupt Enable Register
- */
-#define RTCIENR_ADDR	0xfffffb10
-#define RTCIENR		WORD_REF(RTCIENR_ADDR)
-
-#define RTCIENR_SW	0x0001	/* Stopwatch interrupt enable */
-#define RTCIENR_MIN	0x0002	/* 1-minute interrupt enable */
-#define RTCIENR_ALM	0x0004	/* Alarm interrupt enable */
-#define RTCIENR_DAY	0x0008	/* 24-hour rollover interrupt enable */
-#define RTCIENR_1HZ	0x0010	/* 1Hz interrupt enable */
-#define RTCIENR_HR	0x0020	/* 1-hour interrupt enable */
-#define RTCIENR_SAM0	0x0100	/*   4Hz /   4.6875Hz interrupt enable */ 
-#define RTCIENR_SAM1	0x0200	/*   8Hz /   9.3750Hz interrupt enable */ 
-#define RTCIENR_SAM2	0x0400	/*  16Hz /  18.7500Hz interrupt enable */ 
-#define RTCIENR_SAM3	0x0800	/*  32Hz /  37.5000Hz interrupt enable */ 
-#define RTCIENR_SAM4	0x1000	/*  64Hz /  75.0000Hz interrupt enable */ 
-#define RTCIENR_SAM5	0x2000	/* 128Hz / 150.0000Hz interrupt enable */ 
-#define RTCIENR_SAM6	0x4000	/* 256Hz / 300.0000Hz interrupt enable */ 
-#define RTCIENR_SAM7	0x8000	/* 512Hz / 600.0000Hz interrupt enable */ 
-
-/* 
- * Stopwatch Minutes Register
- */
-#define STPWCH_ADDR	0xfffffb12
-#define STPWCH		WORD_REF(STPWCH)
-
-#define STPWCH_CNT_MASK	 0x003f	/* Stopwatch countdown value */
-#define SPTWCH_CNT_SHIFT 0
-
-/*
- * RTC Day Count Register 
- */
-#define DAYR_ADDR	0xfffffb1a
-#define DAYR		WORD_REF(DAYR_ADDR)
-
-#define DAYR_DAYS_MASK	0x1ff	/* Day Setting */
-#define DAYR_DAYS_SHIFT 0
-
-/*
- * RTC Day Alarm Register 
- */
-#define DAYALARM_ADDR	0xfffffb1c
-#define DAYALARM	WORD_REF(DAYALARM_ADDR)
-
-#define DAYALARM_DAYSAL_MASK	0x01ff	/* Day Setting of the Alarm */
-#define DAYALARM_DAYSAL_SHIFT 	0
-
-/**********
- *
- * 0xFFFFFCxx -- DRAM Controller
- *
- **********/
-
-/*
- * DRAM Memory Configuration Register 
- */
-#define DRAMMC_ADDR	0xfffffc00
-#define DRAMMC		WORD_REF(DRAMMC_ADDR)
-
-#define DRAMMC_ROW12_MASK	0xc000	/* Row address bit for MD12 */
-#define   DRAMMC_ROW12_PA10	0x0000
-#define   DRAMMC_ROW12_PA21	0x4000	
-#define   DRAMMC_ROW12_PA23	0x8000
-#define	DRAMMC_ROW0_MASK	0x3000	/* Row address bit for MD0 */
-#define	  DRAMMC_ROW0_PA11	0x0000
-#define   DRAMMC_ROW0_PA22	0x1000
-#define   DRAMMC_ROW0_PA23	0x2000
-#define DRAMMC_ROW11		0x0800	/* Row address bit for MD11 PA20/PA22 */
-#define DRAMMC_ROW10		0x0400	/* Row address bit for MD10 PA19/PA21 */
-#define	DRAMMC_ROW9		0x0200	/* Row address bit for MD9  PA9/PA19  */
-#define DRAMMC_ROW8		0x0100	/* Row address bit for MD8  PA10/PA20 */
-#define DRAMMC_COL10		0x0080	/* Col address bit for MD10 PA11/PA0  */
-#define DRAMMC_COL9		0x0040	/* Col address bit for MD9  PA10/PA0  */
-#define DRAMMC_COL8		0x0020	/* Col address bit for MD8  PA9/PA0   */
-#define DRAMMC_REF_MASK		0x001f	/* Reresh Cycle */
-#define DRAMMC_REF_SHIFT	0
-
-/*
- * DRAM Control Register
- */
-#define DRAMC_ADDR	0xfffffc02
-#define DRAMC		WORD_REF(DRAMC_ADDR)
-
-#define DRAMC_DWE	   0x0001	/* DRAM Write Enable */
-#define DRAMC_RST	   0x0002	/* Reset Burst Refresh Enable */
-#define DRAMC_LPR	   0x0004	/* Low-Power Refresh Enable */
-#define DRAMC_SLW	   0x0008	/* Slow RAM */
-#define DRAMC_LSP	   0x0010	/* Light Sleep */
-#define DRAMC_MSW	   0x0020	/* Slow Multiplexing */
-#define DRAMC_WS_MASK	   0x00c0	/* Wait-states */
-#define DRAMC_WS_SHIFT	   6
-#define DRAMC_PGSZ_MASK    0x0300	/* Page Size for fast page mode */
-#define DRAMC_PGSZ_SHIFT   8
-#define   DRAMC_PGSZ_256K  0x0000	
-#define   DRAMC_PGSZ_512K  0x0100
-#define   DRAMC_PGSZ_1024K 0x0200
-#define	  DRAMC_PGSZ_2048K 0x0300
-#define DRAMC_EDO	   0x0400	/* EDO DRAM */
-#define DRAMC_CLK	   0x0800	/* Refresh Timer Clock source select */
-#define DRAMC_BC_MASK	   0x3000	/* Page Access Clock Cycle (FP mode) */
-#define DRAMC_BC_SHIFT	   12
-#define DRAMC_RM	   0x4000	/* Refresh Mode */
-#define DRAMC_EN	   0x8000	/* DRAM Controller enable */
-
-
-/**********
- *
- * 0xFFFFFDxx -- In-Circuit Emulation (ICE)
- *
- **********/
-
-/*
- * ICE Module Address Compare Register
- */
-#define ICEMACR_ADDR	0xfffffd00
-#define ICEMACR		LONG_REF(ICEMACR_ADDR)
-
-/*
- * ICE Module Address Mask Register
- */
-#define ICEMAMR_ADDR	0xfffffd04
-#define ICEMAMR		LONG_REF(ICEMAMR_ADDR)
-
-/*
- * ICE Module Control Compare Register
- */
-#define ICEMCCR_ADDR	0xfffffd08
-#define ICEMCCR		WORD_REF(ICEMCCR_ADDR)
-
-#define ICEMCCR_PD	0x0001	/* Program/Data Cycle Selection */
-#define ICEMCCR_RW	0x0002	/* Read/Write Cycle Selection */
-
-/*
- * ICE Module Control Mask Register
- */
-#define ICEMCMR_ADDR	0xfffffd0a
-#define ICEMCMR		WORD_REF(ICEMCMR_ADDR)
-
-#define ICEMCMR_PDM	0x0001	/* Program/Data Cycle Mask */
-#define ICEMCMR_RWM	0x0002	/* Read/Write Cycle Mask */
-
-/*
- * ICE Module Control Register 
- */
-#define ICEMCR_ADDR	0xfffffd0c
-#define ICEMCR		WORD_REF(ICEMCR_ADDR)
-
-#define ICEMCR_CEN	0x0001	/* Compare Enable */
-#define ICEMCR_PBEN	0x0002	/* Program Break Enable */
-#define ICEMCR_SB	0x0004	/* Single Breakpoint */
-#define ICEMCR_HMDIS	0x0008	/* HardMap disable */
-#define ICEMCR_BBIEN	0x0010	/* Bus Break Interrupt Enable */
-
-/*
- * ICE Module Status Register 
- */
-#define ICEMSR_ADDR	0xfffffd0e
-#define ICEMSR		WORD_REF(ICEMSR_ADDR)
-
-#define ICEMSR_EMUEN	0x0001	/* Emulation Enable */
-#define ICEMSR_BRKIRQ	0x0002	/* A-Line Vector Fetch Detected */
-#define ICEMSR_BBIRQ	0x0004	/* Bus Break Interrupt Detected */
-#define ICEMSR_EMIRQ	0x0008	/* EMUIRQ Falling Edge Detected */
-
-#endif /* _MC68EZ328_H_ */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/MC68VZ328.h b/ANDROID_3.4.5/arch/m68k/include/asm/MC68VZ328.h
deleted file mode 100644
index 6bd1bf1f..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/MC68VZ328.h
+++ /dev/null
@@ -1,1349 +0,0 @@
-
-/* include/asm-m68knommu/MC68VZ328.h: 'VZ328 control registers
- *
- * Copyright (c) 2000-2001	Lineo Inc. <www.lineo.com>
- * Copyright (c) 2000-2001	Lineo Canada Corp. <www.lineo.ca>
- * Copyright (C) 1999		Vladimir Gurevich <vgurevic@cisco.com>
- * 				Bare & Hare Software, Inc.
- * Based on include/asm-m68knommu/MC68332.h
- * Copyright (C) 1998  Kenneth Albanowski <kjahds@kjahds.com>,
- *                     The Silver Hammer Group, Ltd.
- *
- * M68VZ328 fixes by Evan Stawnyczy <evan@lineo.com>
- * vz multiport fixes by Michael Leslie <mleslie@lineo.com>
- */
-
-#ifndef _MC68VZ328_H_
-#define _MC68VZ328_H_
-
-#define BYTE_REF(addr) (*((volatile unsigned char*)addr))
-#define WORD_REF(addr) (*((volatile unsigned short*)addr))
-#define LONG_REF(addr) (*((volatile unsigned long*)addr))
-
-#define PUT_FIELD(field, val) (((val) << field##_SHIFT) & field##_MASK)
-#define GET_FIELD(reg, field) (((reg) & field##_MASK) >> field##_SHIFT)
-
-/********** 
- *
- * 0xFFFFF0xx -- System Control
- *
- **********/
- 
-/*
- * System Control Register (SCR)
- */
-#define SCR_ADDR	0xfffff000
-#define SCR		BYTE_REF(SCR_ADDR)
-
-#define SCR_WDTH8	0x01	/* 8-Bit Width Select */
-#define SCR_DMAP	0x04	/* Double Map */
-#define SCR_SO		0x08	/* Supervisor Only */
-#define SCR_BETEN	0x10	/* Bus-Error Time-Out Enable */
-#define SCR_PRV		0x20	/* Privilege Violation */
-#define SCR_WPV		0x40	/* Write Protect Violation */
-#define SCR_BETO	0x80	/* Bus-Error TimeOut */
-
-/*
- * Silicon ID Register (Mask Revision Register (MRR) for '328 Compatibility)
- */
-#define MRR_ADDR 0xfffff004
-#define MRR	 LONG_REF(MRR_ADDR)
-
-/********** 
- *
- * 0xFFFFF1xx -- Chip-Select logic
- *
- **********/
- 
-/*
- * Chip Select Group Base Registers 
- */
-#define CSGBA_ADDR	0xfffff100
-#define CSGBB_ADDR	0xfffff102
-
-#define CSGBC_ADDR	0xfffff104
-#define CSGBD_ADDR	0xfffff106
-
-#define CSGBA		WORD_REF(CSGBA_ADDR)
-#define CSGBB		WORD_REF(CSGBB_ADDR)
-#define CSGBC		WORD_REF(CSGBC_ADDR)
-#define CSGBD		WORD_REF(CSGBD_ADDR)
-
-/*
- * Chip Select Registers 
- */
-#define CSA_ADDR	0xfffff110
-#define CSB_ADDR	0xfffff112
-#define CSC_ADDR	0xfffff114
-#define CSD_ADDR	0xfffff116
-
-#define CSA		WORD_REF(CSA_ADDR)
-#define CSB		WORD_REF(CSB_ADDR)
-#define CSC		WORD_REF(CSC_ADDR)
-#define CSD		WORD_REF(CSD_ADDR)
-
-#define CSA_EN		0x0001		/* Chip-Select Enable */
-#define CSA_SIZ_MASK	0x000e		/* Chip-Select Size */
-#define CSA_SIZ_SHIFT   1
-#define CSA_WS_MASK	0x0070		/* Wait State */
-#define CSA_WS_SHIFT    4
-#define CSA_BSW		0x0080		/* Data Bus Width */
-#define CSA_FLASH	0x0100		/* FLASH Memory Support */
-#define CSA_RO		0x8000		/* Read-Only */
-
-#define CSB_EN		0x0001		/* Chip-Select Enable */
-#define CSB_SIZ_MASK	0x000e		/* Chip-Select Size */
-#define CSB_SIZ_SHIFT   1
-#define CSB_WS_MASK	0x0070		/* Wait State */
-#define CSB_WS_SHIFT    4
-#define CSB_BSW		0x0080		/* Data Bus Width */
-#define CSB_FLASH	0x0100		/* FLASH Memory Support */
-#define CSB_UPSIZ_MASK	0x1800		/* Unprotected memory block size */
-#define CSB_UPSIZ_SHIFT 11
-#define CSB_ROP		0x2000		/* Readonly if protected */
-#define CSB_SOP		0x4000		/* Supervisor only if protected */
-#define CSB_RO		0x8000		/* Read-Only */
-
-#define CSC_EN		0x0001		/* Chip-Select Enable */
-#define CSC_SIZ_MASK	0x000e		/* Chip-Select Size */
-#define CSC_SIZ_SHIFT   1
-#define CSC_WS_MASK	0x0070		/* Wait State */
-#define CSC_WS_SHIFT    4
-#define CSC_BSW		0x0080		/* Data Bus Width */
-#define CSC_FLASH	0x0100		/* FLASH Memory Support */
-#define CSC_UPSIZ_MASK	0x1800		/* Unprotected memory block size */
-#define CSC_UPSIZ_SHIFT 11
-#define CSC_ROP		0x2000		/* Readonly if protected */
-#define CSC_SOP		0x4000		/* Supervisor only if protected */
-#define CSC_RO		0x8000		/* Read-Only */
-
-#define CSD_EN		0x0001		/* Chip-Select Enable */
-#define CSD_SIZ_MASK	0x000e		/* Chip-Select Size */
-#define CSD_SIZ_SHIFT   1
-#define CSD_WS_MASK	0x0070		/* Wait State */
-#define CSD_WS_SHIFT    4
-#define CSD_BSW		0x0080		/* Data Bus Width */
-#define CSD_FLASH	0x0100		/* FLASH Memory Support */
-#define CSD_DRAM	0x0200		/* Dram Selection */
-#define	CSD_COMB	0x0400		/* Combining */
-#define CSD_UPSIZ_MASK	0x1800		/* Unprotected memory block size */
-#define CSD_UPSIZ_SHIFT 11
-#define CSD_ROP		0x2000		/* Readonly if protected */
-#define CSD_SOP		0x4000		/* Supervisor only if protected */
-#define CSD_RO		0x8000		/* Read-Only */
-
-/*
- * Emulation Chip-Select Register 
- */
-#define EMUCS_ADDR	0xfffff118
-#define EMUCS		WORD_REF(EMUCS_ADDR)
-
-#define EMUCS_WS_MASK	0x0070
-#define EMUCS_WS_SHIFT	4
-
-/********** 
- *
- * 0xFFFFF2xx -- Phase Locked Loop (PLL) & Power Control
- *
- **********/
-
-/*
- * PLL Control Register 
- */
-#define PLLCR_ADDR	0xfffff200
-#define PLLCR		WORD_REF(PLLCR_ADDR)
-
-#define PLLCR_DISPLL	       0x0008	/* Disable PLL */
-#define PLLCR_CLKEN	       0x0010	/* Clock (CLKO pin) enable */
-#define PLLCR_PRESC	       0x0020	/* VCO prescaler */
-#define PLLCR_SYSCLK_SEL_MASK  0x0700	/* System Clock Selection */
-#define PLLCR_SYSCLK_SEL_SHIFT 8
-#define PLLCR_LCDCLK_SEL_MASK  0x3800	/* LCD Clock Selection */
-#define PLLCR_LCDCLK_SEL_SHIFT 11
-
-/* '328-compatible definitions */
-#define PLLCR_PIXCLK_SEL_MASK	PLLCR_LCDCLK_SEL_MASK
-#define PLLCR_PIXCLK_SEL_SHIFT	PLLCR_LCDCLK_SEL_SHIFT
-
-/*
- * PLL Frequency Select Register
- */
-#define PLLFSR_ADDR	0xfffff202
-#define PLLFSR		WORD_REF(PLLFSR_ADDR)
-
-#define PLLFSR_PC_MASK	0x00ff		/* P Count */
-#define PLLFSR_PC_SHIFT 0
-#define PLLFSR_QC_MASK	0x0f00		/* Q Count */
-#define PLLFSR_QC_SHIFT 8
-#define PLLFSR_PROT	0x4000		/* Protect P & Q */
-#define PLLFSR_CLK32	0x8000		/* Clock 32 (kHz) */
-
-/*
- * Power Control Register
- */
-#define PCTRL_ADDR	0xfffff207
-#define PCTRL		BYTE_REF(PCTRL_ADDR)
-
-#define PCTRL_WIDTH_MASK	0x1f	/* CPU Clock bursts width */
-#define PCTRL_WIDTH_SHIFT	0
-#define PCTRL_PCEN		0x80	/* Power Control Enable */
-
-/**********
- *
- * 0xFFFFF3xx -- Interrupt Controller
- *
- **********/
-
-/* 
- * Interrupt Vector Register
- */
-#define IVR_ADDR	0xfffff300
-#define IVR		BYTE_REF(IVR_ADDR)
-
-#define IVR_VECTOR_MASK 0xF8
-
-/*
- * Interrupt control Register
- */
-#define ICR_ADDR	0xfffff302
-#define ICR		WORD_REF(ICR_ADDR)
-
-#define ICR_POL5	0x0080	/* Polarity Control for IRQ5 */
-#define ICR_ET6		0x0100	/* Edge Trigger Select for IRQ6 */
-#define ICR_ET3		0x0200	/* Edge Trigger Select for IRQ3 */
-#define ICR_ET2		0x0400	/* Edge Trigger Select for IRQ2 */
-#define ICR_ET1		0x0800	/* Edge Trigger Select for IRQ1 */
-#define ICR_POL6	0x1000	/* Polarity Control for IRQ6 */
-#define ICR_POL3	0x2000	/* Polarity Control for IRQ3 */
-#define ICR_POL2	0x4000	/* Polarity Control for IRQ2 */
-#define ICR_POL1	0x8000	/* Polarity Control for IRQ1 */
-
-/*
- * Interrupt Mask Register
- */
-#define IMR_ADDR	0xfffff304
-#define IMR		LONG_REF(IMR_ADDR)
-
-/*
- * Define the names for bit positions first. This is useful for 
- * request_irq
- */
-#define SPI2_IRQ_NUM	0	/* SPI 2 interrupt */
-#define TMR_IRQ_NUM	1	/* Timer 1 interrupt */
-#define UART1_IRQ_NUM	2	/* UART 1 interrupt */	
-#define	WDT_IRQ_NUM	3	/* Watchdog Timer interrupt */
-#define RTC_IRQ_NUM	4	/* RTC interrupt */
-#define TMR2_IRQ_NUM	5	/* Timer 2 interrupt */
-#define	KB_IRQ_NUM	6	/* Keyboard Interrupt */
-#define PWM1_IRQ_NUM	7	/* Pulse-Width Modulator 1 int. */
-#define	INT0_IRQ_NUM	8	/* External INT0 */
-#define	INT1_IRQ_NUM	9	/* External INT1 */
-#define	INT2_IRQ_NUM	10	/* External INT2 */
-#define	INT3_IRQ_NUM	11	/* External INT3 */
-#define UART2_IRQ_NUM	12	/* UART 2 interrupt */	
-#define PWM2_IRQ_NUM	13	/* Pulse-Width Modulator 1 int. */
-#define IRQ1_IRQ_NUM	16	/* IRQ1 */
-#define IRQ2_IRQ_NUM	17	/* IRQ2 */
-#define IRQ3_IRQ_NUM	18	/* IRQ3 */
-#define IRQ6_IRQ_NUM	19	/* IRQ6 */
-#define IRQ5_IRQ_NUM	20	/* IRQ5 */
-#define SPI1_IRQ_NUM	21	/* SPI 1 interrupt */
-#define SAM_IRQ_NUM	22	/* Sampling Timer for RTC */
-#define EMIQ_IRQ_NUM	23	/* Emulator Interrupt */
-
-#define SPI_IRQ_NUM	SPI2_IRQ_NUM
-
-/* '328-compatible definitions */
-#define SPIM_IRQ_NUM	SPI_IRQ_NUM
-#define TMR1_IRQ_NUM	TMR_IRQ_NUM
-#define UART_IRQ_NUM	UART1_IRQ_NUM
-
-/* 
- * Here go the bitmasks themselves
- */
-#define IMR_MSPI 	(1 << SPI_IRQ_NUM)	/* Mask SPI interrupt */
-#define	IMR_MTMR	(1 << TMR_IRQ_NUM)	/* Mask Timer interrupt */
-#define IMR_MUART	(1 << UART_IRQ_NUM)	/* Mask UART interrupt */	
-#define	IMR_MWDT	(1 << WDT_IRQ_NUM)	/* Mask Watchdog Timer interrupt */
-#define IMR_MRTC	(1 << RTC_IRQ_NUM)	/* Mask RTC interrupt */
-#define	IMR_MKB		(1 << KB_IRQ_NUM)	/* Mask Keyboard Interrupt */
-#define IMR_MPWM	(1 << PWM_IRQ_NUM)	/* Mask Pulse-Width Modulator int. */
-#define	IMR_MINT0	(1 << INT0_IRQ_NUM)	/* Mask External INT0 */
-#define	IMR_MINT1	(1 << INT1_IRQ_NUM)	/* Mask External INT1 */
-#define	IMR_MINT2	(1 << INT2_IRQ_NUM)	/* Mask External INT2 */
-#define	IMR_MINT3	(1 << INT3_IRQ_NUM)	/* Mask External INT3 */
-#define IMR_MIRQ1	(1 << IRQ1_IRQ_NUM)	/* Mask IRQ1 */
-#define IMR_MIRQ2	(1 << IRQ2_IRQ_NUM)	/* Mask IRQ2 */
-#define IMR_MIRQ3	(1 << IRQ3_IRQ_NUM)	/* Mask IRQ3 */
-#define IMR_MIRQ6	(1 << IRQ6_IRQ_NUM)	/* Mask IRQ6 */
-#define IMR_MIRQ5	(1 << IRQ5_IRQ_NUM)	/* Mask IRQ5 */
-#define IMR_MSAM	(1 << SAM_IRQ_NUM)	/* Mask Sampling Timer for RTC */
-#define IMR_MEMIQ	(1 << EMIQ_IRQ_NUM)	/* Mask Emulator Interrupt */
-
-/* '328-compatible definitions */
-#define IMR_MSPIM	IMR_MSPI
-#define IMR_MTMR1	IMR_MTMR
-
-/* 
- * Interrupt Status Register 
- */
-#define ISR_ADDR	0xfffff30c
-#define ISR		LONG_REF(ISR_ADDR)
-
-#define ISR_SPI 	(1 << SPI_IRQ_NUM)	/* SPI interrupt */
-#define	ISR_TMR		(1 << TMR_IRQ_NUM)	/* Timer interrupt */
-#define ISR_UART	(1 << UART_IRQ_NUM)	/* UART interrupt */	
-#define	ISR_WDT		(1 << WDT_IRQ_NUM)	/* Watchdog Timer interrupt */
-#define ISR_RTC		(1 << RTC_IRQ_NUM)	/* RTC interrupt */
-#define	ISR_KB		(1 << KB_IRQ_NUM)	/* Keyboard Interrupt */
-#define ISR_PWM		(1 << PWM_IRQ_NUM)	/* Pulse-Width Modulator interrupt */
-#define	ISR_INT0	(1 << INT0_IRQ_NUM)	/* External INT0 */
-#define	ISR_INT1	(1 << INT1_IRQ_NUM)	/* External INT1 */
-#define	ISR_INT2	(1 << INT2_IRQ_NUM)	/* External INT2 */
-#define	ISR_INT3	(1 << INT3_IRQ_NUM)	/* External INT3 */
-#define ISR_IRQ1	(1 << IRQ1_IRQ_NUM)	/* IRQ1 */
-#define ISR_IRQ2	(1 << IRQ2_IRQ_NUM)	/* IRQ2 */
-#define ISR_IRQ3	(1 << IRQ3_IRQ_NUM)	/* IRQ3 */
-#define ISR_IRQ6	(1 << IRQ6_IRQ_NUM)	/* IRQ6 */
-#define ISR_IRQ5	(1 << IRQ5_IRQ_NUM)	/* IRQ5 */
-#define ISR_SAM		(1 << SAM_IRQ_NUM)	/* Sampling Timer for RTC */
-#define ISR_EMIQ	(1 << EMIQ_IRQ_NUM)	/* Emulator Interrupt */
-
-/* '328-compatible definitions */
-#define ISR_SPIM	ISR_SPI
-#define ISR_TMR1	ISR_TMR
-
-/* 
- * Interrupt Pending Register 
- */
-#define IPR_ADDR	0xfffff30c
-#define IPR		LONG_REF(IPR_ADDR)
-
-#define IPR_SPI 	(1 << SPI_IRQ_NUM)	/* SPI interrupt */
-#define	IPR_TMR		(1 << TMR_IRQ_NUM)	/* Timer interrupt */
-#define IPR_UART	(1 << UART_IRQ_NUM)	/* UART interrupt */	
-#define	IPR_WDT		(1 << WDT_IRQ_NUM)	/* Watchdog Timer interrupt */
-#define IPR_RTC		(1 << RTC_IRQ_NUM)	/* RTC interrupt */
-#define	IPR_KB		(1 << KB_IRQ_NUM)	/* Keyboard Interrupt */
-#define IPR_PWM		(1 << PWM_IRQ_NUM)	/* Pulse-Width Modulator interrupt */
-#define	IPR_INT0	(1 << INT0_IRQ_NUM)	/* External INT0 */
-#define	IPR_INT1	(1 << INT1_IRQ_NUM)	/* External INT1 */
-#define	IPR_INT2	(1 << INT2_IRQ_NUM)	/* External INT2 */
-#define	IPR_INT3	(1 << INT3_IRQ_NUM)	/* External INT3 */
-#define IPR_IRQ1	(1 << IRQ1_IRQ_NUM)	/* IRQ1 */
-#define IPR_IRQ2	(1 << IRQ2_IRQ_NUM)	/* IRQ2 */
-#define IPR_IRQ3	(1 << IRQ3_IRQ_NUM)	/* IRQ3 */
-#define IPR_IRQ6	(1 << IRQ6_IRQ_NUM)	/* IRQ6 */
-#define IPR_IRQ5	(1 << IRQ5_IRQ_NUM)	/* IRQ5 */
-#define IPR_SAM		(1 << SAM_IRQ_NUM)	/* Sampling Timer for RTC */
-#define IPR_EMIQ	(1 << EMIQ_IRQ_NUM)	/* Emulator Interrupt */
-
-/* '328-compatible definitions */
-#define IPR_SPIM	IPR_SPI
-#define IPR_TMR1	IPR_TMR
-
-/**********
- *
- * 0xFFFFF4xx -- Parallel Ports
- *
- **********/
-
-/*
- * Port A
- */
-#define PADIR_ADDR	0xfffff400		/* Port A direction reg */
-#define PADATA_ADDR	0xfffff401		/* Port A data register */
-#define PAPUEN_ADDR	0xfffff402		/* Port A Pull-Up enable reg */
-
-#define PADIR		BYTE_REF(PADIR_ADDR)
-#define PADATA		BYTE_REF(PADATA_ADDR)
-#define PAPUEN		BYTE_REF(PAPUEN_ADDR)
-
-#define PA(x)		(1 << (x))
-
-/* 
- * Port B
- */
-#define PBDIR_ADDR	0xfffff408		/* Port B direction reg */
-#define PBDATA_ADDR	0xfffff409		/* Port B data register */
-#define PBPUEN_ADDR	0xfffff40a		/* Port B Pull-Up enable reg */
-#define PBSEL_ADDR	0xfffff40b		/* Port B Select Register */
-
-#define PBDIR		BYTE_REF(PBDIR_ADDR)
-#define PBDATA		BYTE_REF(PBDATA_ADDR)
-#define PBPUEN		BYTE_REF(PBPUEN_ADDR)
-#define PBSEL		BYTE_REF(PBSEL_ADDR)
-
-#define PB(x)		(1 << (x))
-
-#define PB_CSB0		0x01	/* Use CSB0      as PB[0] */
-#define PB_CSB1		0x02	/* Use CSB1      as PB[1] */
-#define PB_CSC0_RAS0	0x04    /* Use CSC0/RAS0 as PB[2] */	
-#define PB_CSC1_RAS1	0x08    /* Use CSC1/RAS1 as PB[3] */	
-#define PB_CSD0_CAS0	0x10    /* Use CSD0/CAS0 as PB[4] */	
-#define PB_CSD1_CAS1	0x20    /* Use CSD1/CAS1 as PB[5] */
-#define PB_TIN_TOUT	0x40	/* Use TIN/TOUT  as PB[6] */
-#define PB_PWMO		0x80	/* Use PWMO      as PB[7] */
-
-/* 
- * Port C
- */
-#define PCDIR_ADDR	0xfffff410		/* Port C direction reg */
-#define PCDATA_ADDR	0xfffff411		/* Port C data register */
-#define PCPDEN_ADDR	0xfffff412		/* Port C Pull-Down enb. reg */
-#define PCSEL_ADDR	0xfffff413		/* Port C Select Register */
-
-#define PCDIR		BYTE_REF(PCDIR_ADDR)
-#define PCDATA		BYTE_REF(PCDATA_ADDR)
-#define PCPDEN		BYTE_REF(PCPDEN_ADDR)
-#define PCSEL		BYTE_REF(PCSEL_ADDR)
-
-#define PC(x)		(1 << (x))
-
-#define PC_LD0		0x01	/* Use LD0  as PC[0] */
-#define PC_LD1		0x02	/* Use LD1  as PC[1] */
-#define PC_LD2		0x04	/* Use LD2  as PC[2] */
-#define PC_LD3		0x08	/* Use LD3  as PC[3] */
-#define PC_LFLM		0x10	/* Use LFLM as PC[4] */
-#define PC_LLP 		0x20	/* Use LLP  as PC[5] */
-#define PC_LCLK		0x40	/* Use LCLK as PC[6] */
-#define PC_LACD		0x80	/* Use LACD as PC[7] */
-
-/* 
- * Port D
- */
-#define PDDIR_ADDR	0xfffff418		/* Port D direction reg */
-#define PDDATA_ADDR	0xfffff419		/* Port D data register */
-#define PDPUEN_ADDR	0xfffff41a		/* Port D Pull-Up enable reg */
-#define PDSEL_ADDR	0xfffff41b		/* Port D Select Register */
-#define PDPOL_ADDR	0xfffff41c		/* Port D Polarity Register */
-#define PDIRQEN_ADDR	0xfffff41d		/* Port D IRQ enable register */
-#define PDKBEN_ADDR	0xfffff41e		/* Port D Keyboard Enable reg */
-#define	PDIQEG_ADDR	0xfffff41f		/* Port D IRQ Edge Register */
-
-#define PDDIR		BYTE_REF(PDDIR_ADDR)
-#define PDDATA		BYTE_REF(PDDATA_ADDR)
-#define PDPUEN		BYTE_REF(PDPUEN_ADDR)
-#define PDSEL		BYTE_REF(PDSEL_ADDR)
-#define	PDPOL		BYTE_REF(PDPOL_ADDR)
-#define PDIRQEN		BYTE_REF(PDIRQEN_ADDR)
-#define PDKBEN		BYTE_REF(PDKBEN_ADDR)
-#define PDIQEG		BYTE_REF(PDIQEG_ADDR)
-
-#define PD(x)		(1 << (x))
-
-#define PD_INT0		0x01	/* Use INT0 as PD[0] */
-#define PD_INT1		0x02	/* Use INT1 as PD[1] */
-#define PD_INT2		0x04	/* Use INT2 as PD[2] */
-#define PD_INT3		0x08	/* Use INT3 as PD[3] */
-#define PD_IRQ1		0x10	/* Use IRQ1 as PD[4] */
-#define PD_IRQ2		0x20	/* Use IRQ2 as PD[5] */
-#define PD_IRQ3		0x40	/* Use IRQ3 as PD[6] */
-#define PD_IRQ6		0x80	/* Use IRQ6 as PD[7] */
-
-/* 
- * Port E
- */
-#define PEDIR_ADDR	0xfffff420		/* Port E direction reg */
-#define PEDATA_ADDR	0xfffff421		/* Port E data register */
-#define PEPUEN_ADDR	0xfffff422		/* Port E Pull-Up enable reg */
-#define PESEL_ADDR	0xfffff423		/* Port E Select Register */
-
-#define PEDIR		BYTE_REF(PEDIR_ADDR)
-#define PEDATA		BYTE_REF(PEDATA_ADDR)
-#define PEPUEN		BYTE_REF(PEPUEN_ADDR)
-#define PESEL		BYTE_REF(PESEL_ADDR)
-
-#define PE(x)		(1 << (x))
-
-#define PE_SPMTXD	0x01	/* Use SPMTXD as PE[0] */
-#define PE_SPMRXD	0x02	/* Use SPMRXD as PE[1] */
-#define PE_SPMCLK	0x04	/* Use SPMCLK as PE[2] */
-#define PE_DWE		0x08	/* Use DWE    as PE[3] */
-#define PE_RXD		0x10	/* Use RXD    as PE[4] */
-#define PE_TXD		0x20	/* Use TXD    as PE[5] */
-#define PE_RTS		0x40	/* Use RTS    as PE[6] */
-#define PE_CTS		0x80	/* Use CTS    as PE[7] */
-
-/* 
- * Port F
- */
-#define PFDIR_ADDR	0xfffff428		/* Port F direction reg */
-#define PFDATA_ADDR	0xfffff429		/* Port F data register */
-#define PFPUEN_ADDR	0xfffff42a		/* Port F Pull-Up enable reg */
-#define PFSEL_ADDR	0xfffff42b		/* Port F Select Register */
-
-#define PFDIR		BYTE_REF(PFDIR_ADDR)
-#define PFDATA		BYTE_REF(PFDATA_ADDR)
-#define PFPUEN		BYTE_REF(PFPUEN_ADDR)
-#define PFSEL		BYTE_REF(PFSEL_ADDR)
-
-#define PF(x)		(1 << (x))
-
-#define PF_LCONTRAST	0x01	/* Use LCONTRAST as PF[0] */
-#define PF_IRQ5         0x02    /* Use IRQ5      as PF[1] */
-#define PF_CLKO         0x04    /* Use CLKO      as PF[2] */
-#define PF_A20          0x08    /* Use A20       as PF[3] */
-#define PF_A21          0x10    /* Use A21       as PF[4] */
-#define PF_A22          0x20    /* Use A22       as PF[5] */
-#define PF_A23          0x40    /* Use A23       as PF[6] */
-#define PF_CSA1		0x80    /* Use CSA1      as PF[7] */
-
-/* 
- * Port G
- */
-#define PGDIR_ADDR	0xfffff430		/* Port G direction reg */
-#define PGDATA_ADDR	0xfffff431		/* Port G data register */
-#define PGPUEN_ADDR	0xfffff432		/* Port G Pull-Up enable reg */
-#define PGSEL_ADDR	0xfffff433		/* Port G Select Register */
-
-#define PGDIR		BYTE_REF(PGDIR_ADDR)
-#define PGDATA		BYTE_REF(PGDATA_ADDR)
-#define PGPUEN		BYTE_REF(PGPUEN_ADDR)
-#define PGSEL		BYTE_REF(PGSEL_ADDR)
-
-#define PG(x)		(1 << (x))
-
-#define PG_BUSW_DTACK	0x01	/* Use BUSW/DTACK as PG[0] */
-#define PG_A0		0x02	/* Use A0         as PG[1] */
-#define PG_EMUIRQ	0x04	/* Use EMUIRQ     as PG[2] */
-#define PG_HIZ_P_D	0x08	/* Use HIZ/P/D    as PG[3] */
-#define PG_EMUCS        0x10	/* Use EMUCS      as PG[4] */
-#define PG_EMUBRK	0x20	/* Use EMUBRK     as PG[5] */
-
-/* 
- * Port J
- */
-#define PJDIR_ADDR	0xfffff438		/* Port J direction reg */
-#define PJDATA_ADDR	0xfffff439		/* Port J data register */
-#define PJPUEN_ADDR	0xfffff43A		/* Port J Pull-Up enb. reg */
-#define PJSEL_ADDR	0xfffff43B		/* Port J Select Register */
-
-#define PJDIR		BYTE_REF(PJDIR_ADDR)
-#define PJDATA		BYTE_REF(PJDATA_ADDR)
-#define PJPUEN		BYTE_REF(PJPUEN_ADDR)
-#define PJSEL		BYTE_REF(PJSEL_ADDR)
-
-#define PJ(x)		(1 << (x))
-
-/*
- * Port K
- */
-#define PKDIR_ADDR	0xfffff440		/* Port K direction reg */
-#define PKDATA_ADDR	0xfffff441		/* Port K data register */
-#define PKPUEN_ADDR	0xfffff442		/* Port K Pull-Up enb. reg */
-#define PKSEL_ADDR	0xfffff443		/* Port K Select Register */
-
-#define PKDIR		BYTE_REF(PKDIR_ADDR)
-#define PKDATA		BYTE_REF(PKDATA_ADDR)
-#define PKPUEN		BYTE_REF(PKPUEN_ADDR)
-#define PKSEL		BYTE_REF(PKSEL_ADDR)
-
-#define PK(x)		(1 << (x))
-
-#define PK_DATAREADY		0x01	/* Use ~DATA_READY  as PK[0] */
-#define PK_PWM2		0x01	/* Use PWM2  as PK[0] */
-#define PK_R_W		0x02	/* Use R/W  as PK[1] */
-#define PK_LDS		0x04	/* Use /LDS  as PK[2] */
-#define PK_UDS		0x08	/* Use /UDS  as PK[3] */
-#define PK_LD4		0x10	/* Use LD4 as PK[4] */
-#define PK_LD5 		0x20	/* Use LD5  as PK[5] */
-#define PK_LD6		0x40	/* Use LD6 as PK[6] */
-#define PK_LD7		0x80	/* Use LD7 as PK[7] */
-
-#define PJDIR_ADDR	0xfffff438		/* Port J direction reg */
-#define PJDATA_ADDR	0xfffff439		/* Port J data register */
-#define PJPUEN_ADDR	0xfffff43A		/* Port J Pull-Up enable reg */
-#define PJSEL_ADDR	0xfffff43B		/* Port J Select Register */
-
-#define PJDIR		BYTE_REF(PJDIR_ADDR)
-#define PJDATA		BYTE_REF(PJDATA_ADDR)
-#define PJPUEN		BYTE_REF(PJPUEN_ADDR)
-#define PJSEL		BYTE_REF(PJSEL_ADDR)
-
-#define PJ(x)		(1 << (x))
-
-#define PJ_MOSI 	0x01	/* Use MOSI       as PJ[0] */
-#define PJ_MISO		0x02	/* Use MISO       as PJ[1] */
-#define PJ_SPICLK1  	0x04	/* Use SPICLK1    as PJ[2] */
-#define PJ_SS   	0x08	/* Use SS         as PJ[3] */
-#define PJ_RXD2         0x10	/* Use RXD2       as PJ[4] */
-#define PJ_TXD2  	0x20	/* Use TXD2       as PJ[5] */
-#define PJ_RTS2  	0x40	/* Use RTS2       as PJ[5] */
-#define PJ_CTS2  	0x80	/* Use CTS2       as PJ[5] */
-
-/*
- * Port M
- */
-#define PMDIR_ADDR	0xfffff448		/* Port M direction reg */
-#define PMDATA_ADDR	0xfffff449		/* Port M data register */
-#define PMPUEN_ADDR	0xfffff44a		/* Port M Pull-Up enable reg */
-#define PMSEL_ADDR	0xfffff44b		/* Port M Select Register */
-
-#define PMDIR		BYTE_REF(PMDIR_ADDR)
-#define PMDATA		BYTE_REF(PMDATA_ADDR)
-#define PMPUEN		BYTE_REF(PMPUEN_ADDR)
-#define PMSEL		BYTE_REF(PMSEL_ADDR)
-
-#define PM(x)		(1 << (x))
-
-#define PM_SDCLK	0x01	/* Use SDCLK      as PM[0] */
-#define PM_SDCE		0x02	/* Use SDCE       as PM[1] */
-#define PM_DQMH 	0x04	/* Use DQMH       as PM[2] */
-#define PM_DQML 	0x08	/* Use DQML       as PM[3] */
-#define PM_SDA10        0x10	/* Use SDA10      as PM[4] */
-#define PM_DMOE 	0x20	/* Use DMOE       as PM[5] */
-
-/**********
- *
- * 0xFFFFF5xx -- Pulse-Width Modulator (PWM)
- *
- **********/
-
-/*
- * PWM Control Register
- */
-#define PWMC_ADDR	0xfffff500
-#define PWMC		WORD_REF(PWMC_ADDR)
-
-#define PWMC_CLKSEL_MASK	0x0003	/* Clock Selection */
-#define PWMC_CLKSEL_SHIFT	0
-#define PWMC_REPEAT_MASK	0x000c	/* Sample Repeats */
-#define PWMC_REPEAT_SHIFT	2
-#define PWMC_EN			0x0010	/* Enable PWM */
-#define PMNC_FIFOAV		0x0020	/* FIFO Available */
-#define PWMC_IRQEN		0x0040	/* Interrupt Request Enable */
-#define PWMC_IRQ		0x0080	/* Interrupt Request (FIFO empty) */
-#define PWMC_PRESCALER_MASK	0x7f00	/* Incoming Clock prescaler */
-#define PWMC_PRESCALER_SHIFT	8
-#define PWMC_CLKSRC		0x8000	/* Clock Source Select */
-
-/* '328-compatible definitions */
-#define PWMC_PWMEN	PWMC_EN
-
-/*
- * PWM Sample Register 
- */
-#define PWMS_ADDR	0xfffff502
-#define PWMS		WORD_REF(PWMS_ADDR)
-
-/*
- * PWM Period Register
- */
-#define PWMP_ADDR	0xfffff504
-#define PWMP		BYTE_REF(PWMP_ADDR)
-
-/*
- * PWM Counter Register
- */
-#define PWMCNT_ADDR	0xfffff505
-#define PWMCNT		BYTE_REF(PWMCNT_ADDR)
-
-/**********
- *
- * 0xFFFFF6xx -- General-Purpose Timer
- *
- **********/
-
-/* 
- * Timer Control register
- */
-#define TCTL_ADDR	0xfffff600
-#define TCTL		WORD_REF(TCTL_ADDR)
-
-#define	TCTL_TEN		0x0001	/* Timer Enable  */
-#define TCTL_CLKSOURCE_MASK 	0x000e	/* Clock Source: */
-#define   TCTL_CLKSOURCE_STOP	   0x0000	/* Stop count (disabled)    */
-#define   TCTL_CLKSOURCE_SYSCLK	   0x0002	/* SYSCLK to prescaler      */
-#define   TCTL_CLKSOURCE_SYSCLK_16 0x0004	/* SYSCLK/16 to prescaler   */
-#define   TCTL_CLKSOURCE_TIN	   0x0006	/* TIN to prescaler         */
-#define   TCTL_CLKSOURCE_32KHZ	   0x0008	/* 32kHz clock to prescaler */
-#define TCTL_IRQEN		0x0010	/* IRQ Enable    */
-#define TCTL_OM			0x0020	/* Output Mode   */
-#define TCTL_CAP_MASK		0x00c0	/* Capture Edge: */
-#define	  TCTL_CAP_RE		0x0040		/* Capture on rizing edge   */
-#define   TCTL_CAP_FE		0x0080		/* Capture on falling edge  */
-#define TCTL_FRR		0x0010	/* Free-Run Mode */
-
-/* '328-compatible definitions */
-#define TCTL1_ADDR	TCTL_ADDR
-#define TCTL1		TCTL
-
-/*
- * Timer Prescaler Register
- */
-#define TPRER_ADDR	0xfffff602
-#define TPRER		WORD_REF(TPRER_ADDR)
-
-/* '328-compatible definitions */
-#define TPRER1_ADDR	TPRER_ADDR
-#define TPRER1		TPRER
-
-/*
- * Timer Compare Register
- */
-#define TCMP_ADDR	0xfffff604
-#define TCMP		WORD_REF(TCMP_ADDR)
-
-/* '328-compatible definitions */
-#define TCMP1_ADDR	TCMP_ADDR
-#define TCMP1		TCMP
-
-/*
- * Timer Capture register
- */
-#define TCR_ADDR	0xfffff606
-#define TCR		WORD_REF(TCR_ADDR)
-
-/* '328-compatible definitions */
-#define TCR1_ADDR	TCR_ADDR
-#define TCR1		TCR
-
-/*
- * Timer Counter Register
- */
-#define TCN_ADDR	0xfffff608
-#define TCN		WORD_REF(TCN_ADDR)
-
-/* '328-compatible definitions */
-#define TCN1_ADDR	TCN_ADDR
-#define TCN1		TCN
-
-/*
- * Timer Status Register
- */
-#define TSTAT_ADDR	0xfffff60a
-#define TSTAT		WORD_REF(TSTAT_ADDR)
-
-#define TSTAT_COMP	0x0001		/* Compare Event occurred */
-#define TSTAT_CAPT	0x0001		/* Capture Event occurred */
-
-/* '328-compatible definitions */
-#define TSTAT1_ADDR	TSTAT_ADDR
-#define TSTAT1		TSTAT
-
-/**********
- *
- * 0xFFFFF8xx -- Serial Periferial Interface Master (SPIM)
- *
- **********/
-
-/*
- * SPIM Data Register
- */
-#define SPIMDATA_ADDR	0xfffff800
-#define SPIMDATA	WORD_REF(SPIMDATA_ADDR)
-
-/*
- * SPIM Control/Status Register
- */
-#define SPIMCONT_ADDR	0xfffff802
-#define SPIMCONT	WORD_REF(SPIMCONT_ADDR)
-
-#define SPIMCONT_BIT_COUNT_MASK	 0x000f	/* Transfer Length in Bytes */
-#define SPIMCONT_BIT_COUNT_SHIFT 0
-#define SPIMCONT_POL		 0x0010	/* SPMCLK Signel Polarity */
-#define	SPIMCONT_PHA		 0x0020	/* Clock/Data phase relationship */
-#define SPIMCONT_IRQEN		 0x0040 /* IRQ Enable */
-#define SPIMCONT_IRQ		 0x0080	/* Interrupt Request */
-#define SPIMCONT_XCH		 0x0100	/* Exchange */
-#define SPIMCONT_ENABLE		 0x0200	/* Enable SPIM */
-#define SPIMCONT_DATA_RATE_MASK	 0xe000	/* SPIM Data Rate */
-#define SPIMCONT_DATA_RATE_SHIFT 13
-
-/* '328-compatible definitions */
-#define SPIMCONT_SPIMIRQ	SPIMCONT_IRQ
-#define SPIMCONT_SPIMEN		SPIMCONT_ENABLE
-
-/**********
- *
- * 0xFFFFF9xx -- UART
- *
- **********/
-
-/*
- * UART Status/Control Register
- */
-
-#define USTCNT_ADDR	0xfffff900
-#define USTCNT		WORD_REF(USTCNT_ADDR)
-
-#define USTCNT_TXAE	0x0001	/* Transmitter Available Interrupt Enable */
-#define USTCNT_TXHE	0x0002	/* Transmitter Half Empty Enable */
-#define USTCNT_TXEE	0x0004	/* Transmitter Empty Interrupt Enable */
-#define USTCNT_RXRE	0x0008	/* Receiver Ready Interrupt Enable */
-#define USTCNT_RXHE	0x0010	/* Receiver Half-Full Interrupt Enable */
-#define USTCNT_RXFE	0x0020	/* Receiver Full Interrupt Enable */
-#define USTCNT_CTSD	0x0040	/* CTS Delta Interrupt Enable */
-#define USTCNT_ODEN	0x0080	/* Old Data Interrupt Enable */
-#define USTCNT_8_7	0x0100	/* Eight or seven-bit transmission */
-#define USTCNT_STOP	0x0200	/* Stop bit transmission */
-#define USTCNT_ODD	0x0400	/* Odd Parity */
-#define	USTCNT_PEN	0x0800	/* Parity Enable */
-#define USTCNT_CLKM	0x1000	/* Clock Mode Select */
-#define	USTCNT_TXEN	0x2000	/* Transmitter Enable */
-#define USTCNT_RXEN	0x4000	/* Receiver Enable */
-#define USTCNT_UEN	0x8000	/* UART Enable */
-
-/* '328-compatible definitions */
-#define USTCNT_TXAVAILEN	USTCNT_TXAE
-#define USTCNT_TXHALFEN		USTCNT_TXHE
-#define USTCNT_TXEMPTYEN	USTCNT_TXEE
-#define USTCNT_RXREADYEN	USTCNT_RXRE
-#define USTCNT_RXHALFEN		USTCNT_RXHE
-#define USTCNT_RXFULLEN		USTCNT_RXFE
-#define USTCNT_CTSDELTAEN	USTCNT_CTSD
-#define USTCNT_ODD_EVEN		USTCNT_ODD
-#define USTCNT_PARITYEN		USTCNT_PEN
-#define USTCNT_CLKMODE		USTCNT_CLKM
-#define USTCNT_UARTEN		USTCNT_UEN
-
-/*
- * UART Baud Control Register
- */
-#define UBAUD_ADDR	0xfffff902
-#define UBAUD		WORD_REF(UBAUD_ADDR)
-
-#define UBAUD_PRESCALER_MASK	0x003f	/* Actual divisor is 65 - PRESCALER */
-#define UBAUD_PRESCALER_SHIFT	0
-#define UBAUD_DIVIDE_MASK	0x0700	/* Baud Rate freq. divizor */
-#define UBAUD_DIVIDE_SHIFT	8
-#define UBAUD_BAUD_SRC		0x0800	/* Baud Rate Source */
-#define UBAUD_UCLKDIR		0x2000	/* UCLK Direction */
-
-/*
- * UART Receiver Register 
- */
-#define URX_ADDR	0xfffff904
-#define URX		WORD_REF(URX_ADDR)
-
-#define URX_RXDATA_ADDR	0xfffff905
-#define URX_RXDATA	BYTE_REF(URX_RXDATA_ADDR)
-
-#define URX_RXDATA_MASK	 0x00ff	/* Received data */
-#define URX_RXDATA_SHIFT 0
-#define URX_PARITY_ERROR 0x0100	/* Parity Error */
-#define URX_BREAK	 0x0200	/* Break Detected */
-#define URX_FRAME_ERROR	 0x0400	/* Framing Error */
-#define URX_OVRUN	 0x0800	/* Serial Overrun */
-#define URX_OLD_DATA	 0x1000	/* Old data in FIFO */
-#define URX_DATA_READY	 0x2000	/* Data Ready (FIFO not empty) */
-#define URX_FIFO_HALF	 0x4000 /* FIFO is Half-Full */
-#define URX_FIFO_FULL	 0x8000	/* FIFO is Full */
-
-/*
- * UART Transmitter Register 
- */
-#define UTX_ADDR	0xfffff906
-#define UTX		WORD_REF(UTX_ADDR)
-
-#define UTX_TXDATA_ADDR	0xfffff907
-#define UTX_TXDATA	BYTE_REF(UTX_TXDATA_ADDR)
-
-#define UTX_TXDATA_MASK	 0x00ff	/* Data to be transmitted */
-#define UTX_TXDATA_SHIFT 0
-#define UTX_CTS_DELTA	 0x0100	/* CTS changed */
-#define UTX_CTS_STAT	 0x0200	/* CTS State */
-#define	UTX_BUSY	 0x0400	/* FIFO is busy, sending a character */
-#define	UTX_NOCTS	 0x0800	/* Ignore CTS */
-#define UTX_SEND_BREAK	 0x1000	/* Send a BREAK */
-#define UTX_TX_AVAIL	 0x2000	/* Transmit FIFO has a slot available */
-#define UTX_FIFO_HALF	 0x4000	/* Transmit FIFO is half empty */
-#define UTX_FIFO_EMPTY	 0x8000	/* Transmit FIFO is empty */
-
-/* '328-compatible definitions */
-#define UTX_CTS_STATUS	UTX_CTS_STAT
-#define UTX_IGNORE_CTS	UTX_NOCTS
-
-/*
- * UART Miscellaneous Register 
- */
-#define UMISC_ADDR	0xfffff908
-#define UMISC		WORD_REF(UMISC_ADDR)
-
-#define UMISC_TX_POL	 0x0004	/* Transmit Polarity */
-#define UMISC_RX_POL	 0x0008	/* Receive Polarity */
-#define UMISC_IRDA_LOOP	 0x0010	/* IrDA Loopback Enable */
-#define UMISC_IRDA_EN	 0x0020	/* Infra-Red Enable */
-#define UMISC_RTS	 0x0040	/* Set RTS status */
-#define UMISC_RTSCONT	 0x0080	/* Choose RTS control */
-#define UMISC_IR_TEST	 0x0400	/* IRDA Test Enable */
-#define UMISC_BAUD_RESET 0x0800	/* Reset Baud Rate Generation Counters */
-#define UMISC_LOOP	 0x1000	/* Serial Loopback Enable */
-#define UMISC_FORCE_PERR 0x2000	/* Force Parity Error */
-#define UMISC_CLKSRC	 0x4000	/* Clock Source */
-#define UMISC_BAUD_TEST	 0x8000	/* Enable Baud Test Mode */
-
-/* 
- * UART Non-integer Prescaler Register
- */
-#define NIPR_ADDR	0xfffff90a
-#define NIPR		WORD_REF(NIPR_ADDR)
-
-#define NIPR_STEP_VALUE_MASK	0x00ff	/* NI prescaler step value */
-#define NIPR_STEP_VALUE_SHIFT	0
-#define NIPR_SELECT_MASK	0x0700	/* Tap Selection */
-#define NIPR_SELECT_SHIFT	8
-#define NIPR_PRE_SEL		0x8000	/* Non-integer prescaler select */
-
-
-/* generalization of uart control registers to support multiple ports: */
-typedef struct {
-  volatile unsigned short int ustcnt;
-  volatile unsigned short int ubaud;
-  union {
-    volatile unsigned short int w;
-    struct {
-      volatile unsigned char status;
-      volatile unsigned char rxdata;
-    } b;
-  } urx;
-  union {
-    volatile unsigned short int w;
-    struct {
-      volatile unsigned char status;
-      volatile unsigned char txdata;
-    } b;
-  } utx;
-  volatile unsigned short int umisc;
-  volatile unsigned short int nipr;
-  volatile unsigned short int hmark;
-  volatile unsigned short int unused;
-} __attribute__((packed)) m68328_uart;
-
-
-
-
-/**********
- *
- * 0xFFFFFAxx -- LCD Controller
- *
- **********/
-
-/*
- * LCD Screen Starting Address Register 
- */
-#define LSSA_ADDR	0xfffffa00
-#define LSSA		LONG_REF(LSSA_ADDR)
-
-#define LSSA_SSA_MASK	0x1ffffffe	/* Bits 0 and 29-31 are reserved */
-
-/*
- * LCD Virtual Page Width Register 
- */
-#define LVPW_ADDR	0xfffffa05
-#define LVPW		BYTE_REF(LVPW_ADDR)
-
-/*
- * LCD Screen Width Register (not compatible with '328 !!!) 
- */
-#define LXMAX_ADDR	0xfffffa08
-#define LXMAX		WORD_REF(LXMAX_ADDR)
-
-#define LXMAX_XM_MASK	0x02f0		/* Bits 0-3 and 10-15 are reserved */
-
-/*
- * LCD Screen Height Register
- */
-#define LYMAX_ADDR	0xfffffa0a
-#define LYMAX		WORD_REF(LYMAX_ADDR)
-
-#define LYMAX_YM_MASK	0x01ff		/* Bits 9-15 are reserved */
-
-/*
- * LCD Cursor X Position Register
- */
-#define LCXP_ADDR	0xfffffa18
-#define LCXP		WORD_REF(LCXP_ADDR)
-
-#define LCXP_CC_MASK	0xc000		/* Cursor Control */
-#define   LCXP_CC_TRAMSPARENT	0x0000
-#define   LCXP_CC_BLACK		0x4000
-#define   LCXP_CC_REVERSED	0x8000
-#define   LCXP_CC_WHITE		0xc000
-#define LCXP_CXP_MASK	0x02ff		/* Cursor X position */
-
-/*
- * LCD Cursor Y Position Register
- */
-#define LCYP_ADDR	0xfffffa1a
-#define LCYP		WORD_REF(LCYP_ADDR)
-
-#define LCYP_CYP_MASK	0x01ff		/* Cursor Y Position */
-
-/*
- * LCD Cursor Width and Heigth Register
- */
-#define LCWCH_ADDR	0xfffffa1c
-#define LCWCH		WORD_REF(LCWCH_ADDR)
-
-#define LCWCH_CH_MASK	0x001f		/* Cursor Height */
-#define LCWCH_CH_SHIFT	0
-#define LCWCH_CW_MASK	0x1f00		/* Cursor Width */
-#define LCWCH_CW_SHIFT	8
-
-/*
- * LCD Blink Control Register
- */
-#define LBLKC_ADDR	0xfffffa1f
-#define LBLKC		BYTE_REF(LBLKC_ADDR)
-
-#define LBLKC_BD_MASK	0x7f	/* Blink Divisor */
-#define LBLKC_BD_SHIFT	0
-#define LBLKC_BKEN	0x80	/* Blink Enabled */
-
-/*
- * LCD Panel Interface Configuration Register 
- */
-#define LPICF_ADDR	0xfffffa20
-#define LPICF		BYTE_REF(LPICF_ADDR)
-
-#define LPICF_GS_MASK	 0x03	 /* Gray-Scale Mode */
-#define	  LPICF_GS_BW	   0x00
-#define   LPICF_GS_GRAY_4  0x01
-#define   LPICF_GS_GRAY_16 0x02
-#define LPICF_PBSIZ_MASK 0x0c	/* Panel Bus Width */
-#define   LPICF_PBSIZ_1	   0x00
-#define   LPICF_PBSIZ_2    0x04
-#define   LPICF_PBSIZ_4    0x08
-
-/*
- * LCD Polarity Configuration Register 
- */
-#define LPOLCF_ADDR	0xfffffa21
-#define LPOLCF		BYTE_REF(LPOLCF_ADDR)
-
-#define LPOLCF_PIXPOL	0x01	/* Pixel Polarity */
-#define LPOLCF_LPPOL	0x02	/* Line Pulse Polarity */
-#define LPOLCF_FLMPOL	0x04	/* Frame Marker Polarity */
-#define LPOLCF_LCKPOL	0x08	/* LCD Shift Lock Polarity */
-
-/*
- * LACD (LCD Alternate Crystal Direction) Rate Control Register
- */
-#define LACDRC_ADDR	0xfffffa23
-#define LACDRC		BYTE_REF(LACDRC_ADDR)
-
-#define LACDRC_ACDSLT	 0x80	/* Signal Source Select */
-#define LACDRC_ACD_MASK	 0x0f	/* Alternate Crystal Direction Control */
-#define LACDRC_ACD_SHIFT 0
-
-/*
- * LCD Pixel Clock Divider Register
- */
-#define LPXCD_ADDR	0xfffffa25
-#define LPXCD		BYTE_REF(LPXCD_ADDR)
-
-#define	LPXCD_PCD_MASK	0x3f 	/* Pixel Clock Divider */
-#define LPXCD_PCD_SHIFT	0
-
-/*
- * LCD Clocking Control Register
- */
-#define LCKCON_ADDR	0xfffffa27
-#define LCKCON		BYTE_REF(LCKCON_ADDR)
-
-#define LCKCON_DWS_MASK	 0x0f	/* Display Wait-State */
-#define LCKCON_DWS_SHIFT 0
-#define LCKCON_DWIDTH	 0x40	/* Display Memory Width  */
-#define LCKCON_LCDON	 0x80	/* Enable LCD Controller */
-
-/* '328-compatible definitions */
-#define LCKCON_DW_MASK  LCKCON_DWS_MASK
-#define LCKCON_DW_SHIFT LCKCON_DWS_SHIFT
- 
-/*
- * LCD Refresh Rate Adjustment Register 
- */
-#define LRRA_ADDR	0xfffffa29
-#define LRRA		BYTE_REF(LRRA_ADDR)
-
-/*
- * LCD Panning Offset Register
- */
-#define LPOSR_ADDR	0xfffffa2d
-#define LPOSR		BYTE_REF(LPOSR_ADDR)
-
-#define LPOSR_POS_MASK	0x0f	/* Pixel Offset Code */
-#define LPOSR_POS_SHIFT	0
-
-/*
- * LCD Frame Rate Control Modulation Register
- */
-#define LFRCM_ADDR	0xfffffa31
-#define LFRCM		BYTE_REF(LFRCM_ADDR)
-
-#define LFRCM_YMOD_MASK	 0x0f	/* Vertical Modulation */
-#define LFRCM_YMOD_SHIFT 0
-#define LFRCM_XMOD_MASK	 0xf0	/* Horizontal Modulation */
-#define LFRCM_XMOD_SHIFT 4
-
-/*
- * LCD Gray Palette Mapping Register
- */
-#define LGPMR_ADDR	0xfffffa33
-#define LGPMR		BYTE_REF(LGPMR_ADDR)
-
-#define LGPMR_G1_MASK	0x0f
-#define LGPMR_G1_SHIFT	0
-#define LGPMR_G2_MASK	0xf0
-#define LGPMR_G2_SHIFT	4
-
-/* 
- * PWM Contrast Control Register
- */
-#define PWMR_ADDR	0xfffffa36
-#define PWMR		WORD_REF(PWMR_ADDR)
-
-#define PWMR_PW_MASK	0x00ff	/* Pulse Width */
-#define PWMR_PW_SHIFT	0
-#define PWMR_CCPEN	0x0100	/* Contrast Control Enable */
-#define PWMR_SRC_MASK	0x0600	/* Input Clock Source */
-#define   PWMR_SRC_LINE	  0x0000	/* Line Pulse  */
-#define   PWMR_SRC_PIXEL  0x0200	/* Pixel Clock */
-#define   PWMR_SRC_LCD    0x4000	/* LCD clock   */
-
-/**********
- *
- * 0xFFFFFBxx -- Real-Time Clock (RTC)
- *
- **********/
-
-/*
- * RTC Hours Minutes and Seconds Register
- */
-#define RTCTIME_ADDR	0xfffffb00
-#define RTCTIME		LONG_REF(RTCTIME_ADDR)
-
-#define RTCTIME_SECONDS_MASK	0x0000003f	/* Seconds */
-#define RTCTIME_SECONDS_SHIFT	0
-#define RTCTIME_MINUTES_MASK	0x003f0000	/* Minutes */
-#define RTCTIME_MINUTES_SHIFT	16
-#define RTCTIME_HOURS_MASK	0x1f000000	/* Hours */
-#define RTCTIME_HOURS_SHIFT	24
-
-/*
- *  RTC Alarm Register 
- */
-#define RTCALRM_ADDR    0xfffffb04
-#define RTCALRM         LONG_REF(RTCALRM_ADDR)
-
-#define RTCALRM_SECONDS_MASK    0x0000003f      /* Seconds */
-#define RTCALRM_SECONDS_SHIFT   0
-#define RTCALRM_MINUTES_MASK    0x003f0000      /* Minutes */
-#define RTCALRM_MINUTES_SHIFT   16
-#define RTCALRM_HOURS_MASK      0x1f000000      /* Hours */
-#define RTCALRM_HOURS_SHIFT     24
-
-/*
- * Watchdog Timer Register 
- */
-#define WATCHDOG_ADDR	0xfffffb0a
-#define WATCHDOG	WORD_REF(WATCHDOG_ADDR)
-
-#define WATCHDOG_EN	0x0001	/* Watchdog Enabled */
-#define WATCHDOG_ISEL	0x0002	/* Select the watchdog interrupt */
-#define WATCHDOG_INTF	0x0080	/* Watchdog interrupt occurred */
-#define WATCHDOG_CNT_MASK  0x0300	/* Watchdog Counter */
-#define WATCHDOG_CNT_SHIFT 8
-
-/*
- * RTC Control Register
- */
-#define RTCCTL_ADDR	0xfffffb0c
-#define RTCCTL		WORD_REF(RTCCTL_ADDR)
-
-#define RTCCTL_XTL	0x0020	/* Crystal Selection */
-#define RTCCTL_EN	0x0080	/* RTC Enable */
-
-/* '328-compatible definitions */
-#define RTCCTL_384	RTCCTL_XTL
-#define RTCCTL_ENABLE	RTCCTL_EN
-
-/*
- * RTC Interrupt Status Register 
- */
-#define RTCISR_ADDR	0xfffffb0e
-#define RTCISR		WORD_REF(RTCISR_ADDR)
-
-#define RTCISR_SW	0x0001	/* Stopwatch timed out */
-#define RTCISR_MIN	0x0002	/* 1-minute interrupt has occurred */
-#define RTCISR_ALM	0x0004	/* Alarm interrupt has occurred */
-#define RTCISR_DAY	0x0008	/* 24-hour rollover interrupt has occurred */
-#define RTCISR_1HZ	0x0010	/* 1Hz interrupt has occurred */
-#define RTCISR_HR	0x0020	/* 1-hour interrupt has occurred */
-#define RTCISR_SAM0	0x0100	/*   4Hz /   4.6875Hz interrupt has occurred */ 
-#define RTCISR_SAM1	0x0200	/*   8Hz /   9.3750Hz interrupt has occurred */ 
-#define RTCISR_SAM2	0x0400	/*  16Hz /  18.7500Hz interrupt has occurred */ 
-#define RTCISR_SAM3	0x0800	/*  32Hz /  37.5000Hz interrupt has occurred */ 
-#define RTCISR_SAM4	0x1000	/*  64Hz /  75.0000Hz interrupt has occurred */ 
-#define RTCISR_SAM5	0x2000	/* 128Hz / 150.0000Hz interrupt has occurred */ 
-#define RTCISR_SAM6	0x4000	/* 256Hz / 300.0000Hz interrupt has occurred */ 
-#define RTCISR_SAM7	0x8000	/* 512Hz / 600.0000Hz interrupt has occurred */ 
-
-/*
- * RTC Interrupt Enable Register
- */
-#define RTCIENR_ADDR	0xfffffb10
-#define RTCIENR		WORD_REF(RTCIENR_ADDR)
-
-#define RTCIENR_SW	0x0001	/* Stopwatch interrupt enable */
-#define RTCIENR_MIN	0x0002	/* 1-minute interrupt enable */
-#define RTCIENR_ALM	0x0004	/* Alarm interrupt enable */
-#define RTCIENR_DAY	0x0008	/* 24-hour rollover interrupt enable */
-#define RTCIENR_1HZ	0x0010	/* 1Hz interrupt enable */
-#define RTCIENR_HR	0x0020	/* 1-hour interrupt enable */
-#define RTCIENR_SAM0	0x0100	/*   4Hz /   4.6875Hz interrupt enable */ 
-#define RTCIENR_SAM1	0x0200	/*   8Hz /   9.3750Hz interrupt enable */ 
-#define RTCIENR_SAM2	0x0400	/*  16Hz /  18.7500Hz interrupt enable */ 
-#define RTCIENR_SAM3	0x0800	/*  32Hz /  37.5000Hz interrupt enable */ 
-#define RTCIENR_SAM4	0x1000	/*  64Hz /  75.0000Hz interrupt enable */ 
-#define RTCIENR_SAM5	0x2000	/* 128Hz / 150.0000Hz interrupt enable */ 
-#define RTCIENR_SAM6	0x4000	/* 256Hz / 300.0000Hz interrupt enable */ 
-#define RTCIENR_SAM7	0x8000	/* 512Hz / 600.0000Hz interrupt enable */ 
-
-/* 
- * Stopwatch Minutes Register
- */
-#define STPWCH_ADDR	0xfffffb12
-#define STPWCH		WORD_REF(STPWCH_ADDR)
-
-#define STPWCH_CNT_MASK	 0x003f	/* Stopwatch countdown value */
-#define SPTWCH_CNT_SHIFT 0
-
-/*
- * RTC Day Count Register 
- */
-#define DAYR_ADDR	0xfffffb1a
-#define DAYR		WORD_REF(DAYR_ADDR)
-
-#define DAYR_DAYS_MASK	0x1ff	/* Day Setting */
-#define DAYR_DAYS_SHIFT 0
-
-/*
- * RTC Day Alarm Register 
- */
-#define DAYALARM_ADDR	0xfffffb1c
-#define DAYALARM	WORD_REF(DAYALARM_ADDR)
-
-#define DAYALARM_DAYSAL_MASK	0x01ff	/* Day Setting of the Alarm */
-#define DAYALARM_DAYSAL_SHIFT 	0
-
-/**********
- *
- * 0xFFFFFCxx -- DRAM Controller
- *
- **********/
-
-/*
- * DRAM Memory Configuration Register 
- */
-#define DRAMMC_ADDR	0xfffffc00
-#define DRAMMC		WORD_REF(DRAMMC_ADDR)
-
-#define DRAMMC_ROW12_MASK	0xc000	/* Row address bit for MD12 */
-#define   DRAMMC_ROW12_PA10	0x0000
-#define   DRAMMC_ROW12_PA21	0x4000	
-#define   DRAMMC_ROW12_PA23	0x8000
-#define	DRAMMC_ROW0_MASK	0x3000	/* Row address bit for MD0 */
-#define	  DRAMMC_ROW0_PA11	0x0000
-#define   DRAMMC_ROW0_PA22	0x1000
-#define   DRAMMC_ROW0_PA23	0x2000
-#define DRAMMC_ROW11		0x0800	/* Row address bit for MD11 PA20/PA22 */
-#define DRAMMC_ROW10		0x0400	/* Row address bit for MD10 PA19/PA21 */
-#define	DRAMMC_ROW9		0x0200	/* Row address bit for MD9  PA9/PA19  */
-#define DRAMMC_ROW8		0x0100	/* Row address bit for MD8  PA10/PA20 */
-#define DRAMMC_COL10		0x0080	/* Col address bit for MD10 PA11/PA0  */
-#define DRAMMC_COL9		0x0040	/* Col address bit for MD9  PA10/PA0  */
-#define DRAMMC_COL8		0x0020	/* Col address bit for MD8  PA9/PA0   */
-#define DRAMMC_REF_MASK		0x001f	/* Reresh Cycle */
-#define DRAMMC_REF_SHIFT	0
-
-/*
- * DRAM Control Register
- */
-#define DRAMC_ADDR	0xfffffc02
-#define DRAMC		WORD_REF(DRAMC_ADDR)
-
-#define DRAMC_DWE	   0x0001	/* DRAM Write Enable */
-#define DRAMC_RST	   0x0002	/* Reset Burst Refresh Enable */
-#define DRAMC_LPR	   0x0004	/* Low-Power Refresh Enable */
-#define DRAMC_SLW	   0x0008	/* Slow RAM */
-#define DRAMC_LSP	   0x0010	/* Light Sleep */
-#define DRAMC_MSW	   0x0020	/* Slow Multiplexing */
-#define DRAMC_WS_MASK	   0x00c0	/* Wait-states */
-#define DRAMC_WS_SHIFT	   6
-#define DRAMC_PGSZ_MASK    0x0300	/* Page Size for fast page mode */
-#define DRAMC_PGSZ_SHIFT   8
-#define   DRAMC_PGSZ_256K  0x0000	
-#define   DRAMC_PGSZ_512K  0x0100
-#define   DRAMC_PGSZ_1024K 0x0200
-#define	  DRAMC_PGSZ_2048K 0x0300
-#define DRAMC_EDO	   0x0400	/* EDO DRAM */
-#define DRAMC_CLK	   0x0800	/* Refresh Timer Clock source select */
-#define DRAMC_BC_MASK	   0x3000	/* Page Access Clock Cycle (FP mode) */
-#define DRAMC_BC_SHIFT	   12
-#define DRAMC_RM	   0x4000	/* Refresh Mode */
-#define DRAMC_EN	   0x8000	/* DRAM Controller enable */
-
-
-/**********
- *
- * 0xFFFFFDxx -- In-Circuit Emulation (ICE)
- *
- **********/
-
-/*
- * ICE Module Address Compare Register
- */
-#define ICEMACR_ADDR	0xfffffd00
-#define ICEMACR		LONG_REF(ICEMACR_ADDR)
-
-/*
- * ICE Module Address Mask Register
- */
-#define ICEMAMR_ADDR	0xfffffd04
-#define ICEMAMR		LONG_REF(ICEMAMR_ADDR)
-
-/*
- * ICE Module Control Compare Register
- */
-#define ICEMCCR_ADDR	0xfffffd08
-#define ICEMCCR		WORD_REF(ICEMCCR_ADDR)
-
-#define ICEMCCR_PD	0x0001	/* Program/Data Cycle Selection */
-#define ICEMCCR_RW	0x0002	/* Read/Write Cycle Selection */
-
-/*
- * ICE Module Control Mask Register
- */
-#define ICEMCMR_ADDR	0xfffffd0a
-#define ICEMCMR		WORD_REF(ICEMCMR_ADDR)
-
-#define ICEMCMR_PDM	0x0001	/* Program/Data Cycle Mask */
-#define ICEMCMR_RWM	0x0002	/* Read/Write Cycle Mask */
-
-/*
- * ICE Module Control Register 
- */
-#define ICEMCR_ADDR	0xfffffd0c
-#define ICEMCR		WORD_REF(ICEMCR_ADDR)
-
-#define ICEMCR_CEN	0x0001	/* Compare Enable */
-#define ICEMCR_PBEN	0x0002	/* Program Break Enable */
-#define ICEMCR_SB	0x0004	/* Single Breakpoint */
-#define ICEMCR_HMDIS	0x0008	/* HardMap disable */
-#define ICEMCR_BBIEN	0x0010	/* Bus Break Interrupt Enable */
-
-/*
- * ICE Module Status Register 
- */
-#define ICEMSR_ADDR	0xfffffd0e
-#define ICEMSR		WORD_REF(ICEMSR_ADDR)
-
-#define ICEMSR_EMUEN	0x0001	/* Emulation Enable */
-#define ICEMSR_BRKIRQ	0x0002	/* A-Line Vector Fetch Detected */
-#define ICEMSR_BBIRQ	0x0004	/* Bus Break Interrupt Detected */
-#define ICEMSR_EMIRQ	0x0008	/* EMUIRQ Falling Edge Detected */
-
-#endif /* _MC68VZ328_H_ */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/a.out-core.h b/ANDROID_3.4.5/arch/m68k/include/asm/a.out-core.h
deleted file mode 100644
index f6bfc1d6..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/a.out-core.h
+++ /dev/null
@@ -1,67 +0,0 @@
-/* a.out coredump register dumper
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-
-#ifndef _ASM_A_OUT_CORE_H
-#define _ASM_A_OUT_CORE_H
-
-#ifdef __KERNEL__
-
-#include <linux/user.h>
-#include <linux/elfcore.h>
-
-/*
- * fill in the user structure for an a.out core dump
- */
-static inline void aout_dump_thread(struct pt_regs *regs, struct user *dump)
-{
-	struct switch_stack *sw;
-
-/* changed the size calculations - should hopefully work better. lbt */
-	dump->magic = CMAGIC;
-	dump->start_code = 0;
-	dump->start_stack = rdusp() & ~(PAGE_SIZE - 1);
-	dump->u_tsize = ((unsigned long) current->mm->end_code) >> PAGE_SHIFT;
-	dump->u_dsize = ((unsigned long) (current->mm->brk +
-					  (PAGE_SIZE-1))) >> PAGE_SHIFT;
-	dump->u_dsize -= dump->u_tsize;
-	dump->u_ssize = 0;
-
-	if (dump->start_stack < TASK_SIZE)
-		dump->u_ssize = ((unsigned long) (TASK_SIZE - dump->start_stack)) >> PAGE_SHIFT;
-
-	dump->u_ar0 = offsetof(struct user, regs);
-	sw = ((struct switch_stack *)regs) - 1;
-	dump->regs.d1 = regs->d1;
-	dump->regs.d2 = regs->d2;
-	dump->regs.d3 = regs->d3;
-	dump->regs.d4 = regs->d4;
-	dump->regs.d5 = regs->d5;
-	dump->regs.d6 = sw->d6;
-	dump->regs.d7 = sw->d7;
-	dump->regs.a0 = regs->a0;
-	dump->regs.a1 = regs->a1;
-	dump->regs.a2 = regs->a2;
-	dump->regs.a3 = sw->a3;
-	dump->regs.a4 = sw->a4;
-	dump->regs.a5 = sw->a5;
-	dump->regs.a6 = sw->a6;
-	dump->regs.d0 = regs->d0;
-	dump->regs.orig_d0 = regs->orig_d0;
-	dump->regs.stkadj = regs->stkadj;
-	dump->regs.sr = regs->sr;
-	dump->regs.pc = regs->pc;
-	dump->regs.fmtvec = (regs->format << 12) | regs->vector;
-	/* dump floating point stuff */
-	dump->u_fpvalid = dump_fpu (regs, &dump->m68kfp);
-}
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_A_OUT_CORE_H */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/a.out.h b/ANDROID_3.4.5/arch/m68k/include/asm/a.out.h
deleted file mode 100644
index 3885fe43..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/a.out.h
+++ /dev/null
@@ -1,20 +0,0 @@
-#ifndef __M68K_A_OUT_H__
-#define __M68K_A_OUT_H__
-
-struct exec
-{
-  unsigned long a_info;		/* Use macros N_MAGIC, etc for access */
-  unsigned a_text;		/* length of text, in bytes */
-  unsigned a_data;		/* length of data, in bytes */
-  unsigned a_bss;		/* length of uninitialized data area for file, in bytes */
-  unsigned a_syms;		/* length of symbol table data in file, in bytes */
-  unsigned a_entry;		/* start address */
-  unsigned a_trsize;		/* length of relocation info for text, in bytes */
-  unsigned a_drsize;		/* length of relocation info for data, in bytes */
-};
-
-#define N_TRSIZE(a)	((a).a_trsize)
-#define N_DRSIZE(a)	((a).a_drsize)
-#define N_SYMSIZE(a)	((a).a_syms)
-
-#endif /* __M68K_A_OUT_H__ */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/adb_iop.h b/ANDROID_3.4.5/arch/m68k/include/asm/adb_iop.h
deleted file mode 100644
index 8a48e56f..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/adb_iop.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * ADB through the IOP
- * Written by Joshua M. Thompson
- */
-
-/* IOP number and channel number for ADB */
-
-#define ADB_IOP		IOP_NUM_ISM
-#define ADB_CHAN	2
-
-/* From the A/UX headers...maybe important, maybe not */
-
-#define ADB_IOP_LISTEN	0x01
-#define ADB_IOP_TALK	0x02
-#define ADB_IOP_EXISTS	0x04
-#define ADB_IOP_FLUSH	0x08
-#define ADB_IOP_RESET	0x10
-#define ADB_IOP_INT	0x20
-#define ADB_IOP_POLL	0x40
-#define ADB_IOP_UNINT	0x80
-
-#define AIF_RESET	0x00
-#define AIF_FLUSH	0x01
-#define AIF_LISTEN	0x08
-#define AIF_TALK	0x0C
-
-/* Flag bits in struct adb_iopmsg */
-
-#define ADB_IOP_EXPLICIT	0x80	/* nonzero if explicit command */
-#define ADB_IOP_AUTOPOLL	0x40	/* auto/SRQ polling enabled    */
-#define ADB_IOP_SRQ		0x04	/* SRQ detected                */
-#define ADB_IOP_TIMEOUT		0x02	/* nonzero if timeout          */
-
-#ifndef __ASSEMBLY__
-
-struct adb_iopmsg {
-	__u8 flags;		/* ADB flags         */
-	__u8 count;		/* no. of data bytes */
-	__u8 cmd;		/* ADB command       */
-	__u8 data[8];		/* ADB data          */
-	__u8 spare[21];		/* spare             */
-};
-
-#endif /* __ASSEMBLY__ */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/amigahw.h b/ANDROID_3.4.5/arch/m68k/include/asm/amigahw.h
deleted file mode 100644
index 7a19b568..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/amigahw.h
+++ /dev/null
@@ -1,349 +0,0 @@
-/*
-** asm-m68k/amigahw.h -- This header defines some macros and pointers for
-**                    the various Amiga custom hardware registers.
-**                    The naming conventions used here conform to those
-**                    used in the Amiga Hardware Reference Manual, 3rd Edition
-**
-** Copyright 1992 by Greg Harp
-**
-** This file is subject to the terms and conditions of the GNU General Public
-** License.  See the file COPYING in the main directory of this archive
-** for more details.
-**
-** Created: 9/24/92 by Greg Harp
-*/
-
-#ifndef _M68K_AMIGAHW_H
-#define _M68K_AMIGAHW_H
-
-#include <linux/ioport.h>
-
-    /*
-     *  Different Amiga models
-     */
-
-#define AMI_UNKNOWN	(0)
-#define AMI_500		(1)
-#define AMI_500PLUS	(2)
-#define AMI_600		(3)
-#define AMI_1000	(4)
-#define AMI_1200	(5)
-#define AMI_2000	(6)
-#define AMI_2500	(7)
-#define AMI_3000	(8)
-#define AMI_3000T	(9)
-#define AMI_3000PLUS	(10)
-#define AMI_4000	(11)
-#define AMI_4000T	(12)
-#define AMI_CDTV	(13)
-#define AMI_CD32	(14)
-#define AMI_DRACO	(15)
-
-
-    /*
-     *  Chipsets
-     */
-
-extern unsigned long amiga_chipset;
-
-#define CS_STONEAGE	(0)
-#define CS_OCS		(1)
-#define CS_ECS		(2)
-#define CS_AGA		(3)
-
-
-    /*
-     *  Miscellaneous
-     */
-
-extern unsigned long amiga_eclock;	/* 700 kHz E Peripheral Clock */
-extern unsigned long amiga_colorclock;	/* 3.5 MHz Color Clock */
-extern unsigned long amiga_chip_size;	/* Chip RAM Size (bytes) */
-extern unsigned char amiga_vblank;	/* VBLANK Frequency */
-
-
-#define AMIGAHW_DECLARE(name)	unsigned name : 1
-#define AMIGAHW_SET(name)	(amiga_hw_present.name = 1)
-#define AMIGAHW_PRESENT(name)	(amiga_hw_present.name)
-
-struct amiga_hw_present {
-    /* video hardware */
-    AMIGAHW_DECLARE(AMI_VIDEO);		/* Amiga Video */
-    AMIGAHW_DECLARE(AMI_BLITTER);	/* Amiga Blitter */
-    AMIGAHW_DECLARE(AMBER_FF);		/* Amber Flicker Fixer */
-    /* sound hardware */
-    AMIGAHW_DECLARE(AMI_AUDIO);		/* Amiga Audio */
-    /* disk storage interfaces */
-    AMIGAHW_DECLARE(AMI_FLOPPY);	/* Amiga Floppy */
-    AMIGAHW_DECLARE(A3000_SCSI);	/* SCSI (wd33c93, A3000 alike) */
-    AMIGAHW_DECLARE(A4000_SCSI);	/* SCSI (ncr53c710, A4000T alike) */
-    AMIGAHW_DECLARE(A1200_IDE);		/* IDE (A1200 alike) */
-    AMIGAHW_DECLARE(A4000_IDE);		/* IDE (A4000 alike) */
-    AMIGAHW_DECLARE(CD_ROM);		/* CD ROM drive */
-    /* other I/O hardware */
-    AMIGAHW_DECLARE(AMI_KEYBOARD);	/* Amiga Keyboard */
-    AMIGAHW_DECLARE(AMI_MOUSE);		/* Amiga Mouse */
-    AMIGAHW_DECLARE(AMI_SERIAL);	/* Amiga Serial */
-    AMIGAHW_DECLARE(AMI_PARALLEL);	/* Amiga Parallel */
-    /* real time clocks */
-    AMIGAHW_DECLARE(A2000_CLK);		/* Hardware Clock (A2000 alike) */
-    AMIGAHW_DECLARE(A3000_CLK);		/* Hardware Clock (A3000 alike) */
-    /* supporting hardware */
-    AMIGAHW_DECLARE(CHIP_RAM);		/* Chip RAM */
-    AMIGAHW_DECLARE(PAULA);		/* Paula (8364) */
-    AMIGAHW_DECLARE(DENISE);		/* Denise (8362) */
-    AMIGAHW_DECLARE(DENISE_HR);		/* Denise (8373) */
-    AMIGAHW_DECLARE(LISA);		/* Lisa (8375) */
-    AMIGAHW_DECLARE(AGNUS_PAL);		/* Normal/Fat PAL Agnus (8367/8371) */
-    AMIGAHW_DECLARE(AGNUS_NTSC);	/* Normal/Fat NTSC Agnus (8361/8370) */
-    AMIGAHW_DECLARE(AGNUS_HR_PAL);	/* Fat Hires PAL Agnus (8372) */
-    AMIGAHW_DECLARE(AGNUS_HR_NTSC);	/* Fat Hires NTSC Agnus (8372) */
-    AMIGAHW_DECLARE(ALICE_PAL);		/* PAL Alice (8374) */
-    AMIGAHW_DECLARE(ALICE_NTSC);	/* NTSC Alice (8374) */
-    AMIGAHW_DECLARE(MAGIC_REKICK);	/* A3000 Magic Hard Rekick */
-    AMIGAHW_DECLARE(PCMCIA);		/* PCMCIA Slot */
-    AMIGAHW_DECLARE(ZORRO);		/* Zorro AutoConfig */
-    AMIGAHW_DECLARE(ZORRO3);		/* Zorro III */
-};
-
-extern struct amiga_hw_present amiga_hw_present;
-
-struct CUSTOM {
-    unsigned short bltddat;
-    unsigned short dmaconr;
-    unsigned short vposr;
-    unsigned short vhposr;
-    unsigned short dskdatr;
-    unsigned short joy0dat;
-    unsigned short joy1dat;
-    unsigned short clxdat;
-    unsigned short adkconr;
-    unsigned short pot0dat;
-    unsigned short pot1dat;
-    unsigned short potgor;
-    unsigned short serdatr;
-    unsigned short dskbytr;
-    unsigned short intenar;
-    unsigned short intreqr;
-    unsigned char  *dskptr;
-    unsigned short dsklen;
-    unsigned short dskdat;
-    unsigned short refptr;
-    unsigned short vposw;
-    unsigned short vhposw;
-    unsigned short copcon;
-    unsigned short serdat;
-    unsigned short serper;
-    unsigned short potgo;
-    unsigned short joytest;
-    unsigned short strequ;
-    unsigned short strvbl;
-    unsigned short strhor;
-    unsigned short strlong;
-    unsigned short bltcon0;
-    unsigned short bltcon1;
-    unsigned short bltafwm;
-    unsigned short bltalwm;
-    unsigned char  *bltcpt;
-    unsigned char  *bltbpt;
-    unsigned char  *bltapt;
-    unsigned char  *bltdpt;
-    unsigned short bltsize;
-    unsigned char  pad2d;
-    unsigned char  bltcon0l;
-    unsigned short bltsizv;
-    unsigned short bltsizh;
-    unsigned short bltcmod;
-    unsigned short bltbmod;
-    unsigned short bltamod;
-    unsigned short bltdmod;
-    unsigned short spare2[4];
-    unsigned short bltcdat;
-    unsigned short bltbdat;
-    unsigned short bltadat;
-    unsigned short spare3[3];
-    unsigned short deniseid;
-    unsigned short dsksync;
-    unsigned short *cop1lc;
-    unsigned short *cop2lc;
-    unsigned short copjmp1;
-    unsigned short copjmp2;
-    unsigned short copins;
-    unsigned short diwstrt;
-    unsigned short diwstop;
-    unsigned short ddfstrt;
-    unsigned short ddfstop;
-    unsigned short dmacon;
-    unsigned short clxcon;
-    unsigned short intena;
-    unsigned short intreq;
-    unsigned short adkcon;
-    struct {
-	unsigned short	*audlc;
-	unsigned short audlen;
-	unsigned short audper;
-	unsigned short audvol;
-	unsigned short auddat;
-	unsigned short audspare[2];
-    } aud[4];
-    unsigned char  *bplpt[8];
-    unsigned short bplcon0;
-    unsigned short bplcon1;
-    unsigned short bplcon2;
-    unsigned short bplcon3;
-    unsigned short bpl1mod;
-    unsigned short bpl2mod;
-    unsigned short bplcon4;
-    unsigned short clxcon2;
-    unsigned short bpldat[8];
-    unsigned char  *sprpt[8];
-    struct {
-	unsigned short pos;
-	unsigned short ctl;
-	unsigned short dataa;
-	unsigned short datab;
-    } spr[8];
-    unsigned short color[32];
-    unsigned short htotal;
-    unsigned short hsstop;
-    unsigned short hbstrt;
-    unsigned short hbstop;
-    unsigned short vtotal;
-    unsigned short vsstop;
-    unsigned short vbstrt;
-    unsigned short vbstop;
-    unsigned short sprhstrt;
-    unsigned short sprhstop;
-    unsigned short bplhstrt;
-    unsigned short bplhstop;
-    unsigned short hhposw;
-    unsigned short hhposr;
-    unsigned short beamcon0;
-    unsigned short hsstrt;
-    unsigned short vsstrt;
-    unsigned short hcenter;
-    unsigned short diwhigh;
-    unsigned short spare4[11];
-    unsigned short fmode;
-};
-
-/*
- * DMA register bits
- */
-#define DMAF_SETCLR		(0x8000)
-#define DMAF_AUD0		(0x0001)
-#define DMAF_AUD1		(0x0002)
-#define DMAF_AUD2		(0x0004)
-#define DMAF_AUD3		(0x0008)
-#define DMAF_DISK		(0x0010)
-#define DMAF_SPRITE		(0x0020)
-#define DMAF_BLITTER		(0x0040)
-#define DMAF_COPPER		(0x0080)
-#define DMAF_RASTER		(0x0100)
-#define DMAF_MASTER		(0x0200)
-#define DMAF_BLITHOG		(0x0400)
-#define DMAF_BLTNZERO		(0x2000)
-#define DMAF_BLTDONE		(0x4000)
-#define DMAF_ALL		(0x01FF)
-
-struct CIA {
-    unsigned char pra;		char pad0[0xff];
-    unsigned char prb;		char pad1[0xff];
-    unsigned char ddra;		char pad2[0xff];
-    unsigned char ddrb;		char pad3[0xff];
-    unsigned char talo;		char pad4[0xff];
-    unsigned char tahi;		char pad5[0xff];
-    unsigned char tblo;		char pad6[0xff];
-    unsigned char tbhi;		char pad7[0xff];
-    unsigned char todlo;	char pad8[0xff];
-    unsigned char todmid;	char pad9[0xff];
-    unsigned char todhi;	char pada[0x1ff];
-    unsigned char sdr;		char padb[0xff];
-    unsigned char icr;		char padc[0xff];
-    unsigned char cra;		char padd[0xff];
-    unsigned char crb;		char pade[0xff];
-};
-
-#define zTwoBase (0x80000000)
-#define ZTWO_PADDR(x) (((unsigned long)(x))-zTwoBase)
-#define ZTWO_VADDR(x) (((unsigned long)(x))+zTwoBase)
-
-#define CUSTOM_PHYSADDR     (0xdff000)
-#define amiga_custom ((*(volatile struct CUSTOM *)(zTwoBase+CUSTOM_PHYSADDR)))
-
-#define CIAA_PHYSADDR	  (0xbfe001)
-#define CIAB_PHYSADDR	  (0xbfd000)
-#define ciaa   ((*(volatile struct CIA *)(zTwoBase + CIAA_PHYSADDR)))
-#define ciab   ((*(volatile struct CIA *)(zTwoBase + CIAB_PHYSADDR)))
-
-#define CHIP_PHYSADDR	    (0x000000)
-
-void amiga_chip_init (void);
-void *amiga_chip_alloc(unsigned long size, const char *name);
-void *amiga_chip_alloc_res(unsigned long size, struct resource *res);
-void amiga_chip_free(void *ptr);
-unsigned long amiga_chip_avail( void ); /*MILAN*/
-extern volatile unsigned short amiga_audio_min_period;
-
-static inline void amifb_video_off(void)
-{
-	if (amiga_chipset == CS_ECS || amiga_chipset == CS_AGA) {
-		/* program Denise/Lisa for a higher maximum play rate */
-		amiga_custom.htotal = 113;        /* 31 kHz */
-		amiga_custom.vtotal = 223;        /* 70 Hz */
-		amiga_custom.beamcon0 = 0x4390;   /* HARDDIS, VAR{BEAM,VSY,HSY,CSY}EN */
-		/* suspend the monitor */
-		amiga_custom.hsstrt = amiga_custom.hsstop = 116;
-		amiga_custom.vsstrt = amiga_custom.vsstop = 226;
-		amiga_audio_min_period = 57;
-	}
-}
-
-struct tod3000 {
-  unsigned int  :28, second2:4;	/* lower digit */
-  unsigned int  :28, second1:4;	/* upper digit */
-  unsigned int  :28, minute2:4;	/* lower digit */
-  unsigned int  :28, minute1:4;	/* upper digit */
-  unsigned int  :28, hour2:4;	/* lower digit */
-  unsigned int  :28, hour1:4;	/* upper digit */
-  unsigned int  :28, weekday:4;
-  unsigned int  :28, day2:4;	/* lower digit */
-  unsigned int  :28, day1:4;	/* upper digit */
-  unsigned int  :28, month2:4;	/* lower digit */
-  unsigned int  :28, month1:4;	/* upper digit */
-  unsigned int  :28, year2:4;	/* lower digit */
-  unsigned int  :28, year1:4;	/* upper digit */
-  unsigned int  :28, cntrl1:4;	/* control-byte 1 */
-  unsigned int  :28, cntrl2:4;	/* control-byte 2 */
-  unsigned int  :28, cntrl3:4;	/* control-byte 3 */
-};
-#define TOD3000_CNTRL1_HOLD	0
-#define TOD3000_CNTRL1_FREE	9
-#define tod_3000 ((*(volatile struct tod3000 *)(zTwoBase+0xDC0000)))
-
-struct tod2000 {
-  unsigned int  :28, second2:4;	/* lower digit */
-  unsigned int  :28, second1:4;	/* upper digit */
-  unsigned int  :28, minute2:4;	/* lower digit */
-  unsigned int  :28, minute1:4;	/* upper digit */
-  unsigned int  :28, hour2:4;	/* lower digit */
-  unsigned int  :28, hour1:4;	/* upper digit */
-  unsigned int  :28, day2:4;	/* lower digit */
-  unsigned int  :28, day1:4;	/* upper digit */
-  unsigned int  :28, month2:4;	/* lower digit */
-  unsigned int  :28, month1:4;	/* upper digit */
-  unsigned int  :28, year2:4;	/* lower digit */
-  unsigned int  :28, year1:4;	/* upper digit */
-  unsigned int  :28, weekday:4;
-  unsigned int  :28, cntrl1:4;	/* control-byte 1 */
-  unsigned int  :28, cntrl2:4;	/* control-byte 2 */
-  unsigned int  :28, cntrl3:4;	/* control-byte 3 */
-};
-
-#define TOD2000_CNTRL1_HOLD	(1<<0)
-#define TOD2000_CNTRL1_BUSY	(1<<1)
-#define TOD2000_CNTRL3_24HMODE	(1<<2)
-#define TOD2000_HOUR1_PM	(1<<2)
-#define tod_2000 ((*(volatile struct tod2000 *)(zTwoBase+0xDC0000)))
-
-#endif /* _M68K_AMIGAHW_H */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/amigaints.h b/ANDROID_3.4.5/arch/m68k/include/asm/amigaints.h
deleted file mode 100644
index b1bcdb83..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/amigaints.h
+++ /dev/null
@@ -1,113 +0,0 @@
-/*
-** amigaints.h -- Amiga Linux interrupt handling structs and prototypes
-**
-** Copyright 1992 by Greg Harp
-**
-** This file is subject to the terms and conditions of the GNU General Public
-** License.  See the file COPYING in the main directory of this archive
-** for more details.
-**
-** Created 10/2/92 by Greg Harp
-*/
-
-#ifndef _ASMm68k_AMIGAINTS_H_
-#define _ASMm68k_AMIGAINTS_H_
-
-#include <asm/irq.h>
-
-/*
-** Amiga Interrupt sources.
-**
-*/
-
-#define AUTO_IRQS           (8)
-#define AMI_STD_IRQS        (14)
-#define CIA_IRQS            (5)
-#define AMI_IRQS            (32) /* AUTO_IRQS+AMI_STD_IRQS+2*CIA_IRQS */
-
-/* builtin serial port interrupts */
-#define IRQ_AMIGA_TBE		(IRQ_USER+0)
-#define IRQ_AMIGA_RBF		(IRQ_USER+11)
-
-/* floppy disk interrupts */
-#define IRQ_AMIGA_DSKBLK	(IRQ_USER+1)
-#define IRQ_AMIGA_DSKSYN	(IRQ_USER+12)
-
-/* software interrupts */
-#define IRQ_AMIGA_SOFT		(IRQ_USER+2)
-
-/* interrupts from external hardware */
-#define IRQ_AMIGA_PORTS		IRQ_AUTO_2
-#define IRQ_AMIGA_EXTER		IRQ_AUTO_6
-
-/* copper interrupt */
-#define IRQ_AMIGA_COPPER	(IRQ_USER+4)
-
-/* vertical blanking interrupt */
-#define IRQ_AMIGA_VERTB		(IRQ_USER+5)
-
-/* Blitter done interrupt */
-#define IRQ_AMIGA_BLIT		(IRQ_USER+6)
-
-/* Audio interrupts */
-#define IRQ_AMIGA_AUD0		(IRQ_USER+7)
-#define IRQ_AMIGA_AUD1		(IRQ_USER+8)
-#define IRQ_AMIGA_AUD2		(IRQ_USER+9)
-#define IRQ_AMIGA_AUD3		(IRQ_USER+10)
-
-/* CIA interrupt sources */
-#define IRQ_AMIGA_CIAA		(IRQ_USER+14)
-#define IRQ_AMIGA_CIAA_TA	(IRQ_USER+14)
-#define IRQ_AMIGA_CIAA_TB	(IRQ_USER+15)
-#define IRQ_AMIGA_CIAA_ALRM	(IRQ_USER+16)
-#define IRQ_AMIGA_CIAA_SP	(IRQ_USER+17)
-#define IRQ_AMIGA_CIAA_FLG	(IRQ_USER+18)
-#define IRQ_AMIGA_CIAB		(IRQ_USER+19)
-#define IRQ_AMIGA_CIAB_TA	(IRQ_USER+19)
-#define IRQ_AMIGA_CIAB_TB	(IRQ_USER+20)
-#define IRQ_AMIGA_CIAB_ALRM	(IRQ_USER+21)
-#define IRQ_AMIGA_CIAB_SP	(IRQ_USER+22)
-#define IRQ_AMIGA_CIAB_FLG	(IRQ_USER+23)
-
-
-/* INTREQR masks */
-#define IF_SETCLR   0x8000      /* set/clr bit */
-#define IF_INTEN    0x4000	/* master interrupt bit in INT* registers */
-#define IF_EXTER    0x2000	/* external level 6 and CIA B interrupt */
-#define IF_DSKSYN   0x1000	/* disk sync interrupt */
-#define IF_RBF	    0x0800	/* serial receive buffer full interrupt */
-#define IF_AUD3     0x0400	/* audio channel 3 done interrupt */
-#define IF_AUD2     0x0200	/* audio channel 2 done interrupt */
-#define IF_AUD1     0x0100	/* audio channel 1 done interrupt */
-#define IF_AUD0     0x0080	/* audio channel 0 done interrupt */
-#define IF_BLIT     0x0040	/* blitter done interrupt */
-#define IF_VERTB    0x0020	/* vertical blanking interrupt */
-#define IF_COPER    0x0010	/* copper interrupt */
-#define IF_PORTS    0x0008	/* external level 2 and CIA A interrupt */
-#define IF_SOFT     0x0004	/* software initiated interrupt */
-#define IF_DSKBLK   0x0002	/* diskblock DMA finished */
-#define IF_TBE	    0x0001	/* serial transmit buffer empty interrupt */
-
-/* CIA interrupt control register bits */
-
-#define CIA_ICR_TA	0x01
-#define CIA_ICR_TB	0x02
-#define CIA_ICR_ALRM	0x04
-#define CIA_ICR_SP	0x08
-#define CIA_ICR_FLG	0x10
-#define CIA_ICR_ALL	0x1f
-#define CIA_ICR_SETCLR	0x80
-
-extern void amiga_init_IRQ(void);
-
-/* to access the interrupt control registers of CIA's use only
-** these functions, they behave exactly like the amiga os routines
-*/
-
-extern struct ciabase ciaa_base, ciab_base;
-
-extern void cia_init_IRQ(struct ciabase *base);
-extern unsigned char cia_set_irq(struct ciabase *base, unsigned char mask);
-extern unsigned char cia_able_irq(struct ciabase *base, unsigned char mask);
-
-#endif /* asm-m68k/amigaints.h */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/amigayle.h b/ANDROID_3.4.5/arch/m68k/include/asm/amigayle.h
deleted file mode 100644
index a01453d9..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/amigayle.h
+++ /dev/null
@@ -1,113 +0,0 @@
-/*
-** asm-m68k/amigayle.h -- This header defines the registers of the gayle chip
-**                        found on the Amiga 1200
-**                        This information was found by disassembling card.resource,
-**                        so the definitions may not be 100% correct
-**                        anyone has an official doc ?
-**
-** Copyright 1997 by Alain Malek
-**
-** This file is subject to the terms and conditions of the GNU General Public
-** License.  See the file COPYING in the main directory of this archive
-** for more details.
-**
-** Created: 11/28/97 by Alain Malek
-*/
-
-#ifndef _M68K_AMIGAYLE_H_
-#define _M68K_AMIGAYLE_H_
-
-#include <linux/types.h>
-#include <asm/amigahw.h>
-
-/* memory layout */
-
-#define GAYLE_RAM		(0x600000+zTwoBase)
-#define GAYLE_RAMSIZE		(0x400000)
-#define GAYLE_ATTRIBUTE		(0xa00000+zTwoBase)
-#define GAYLE_ATTRIBUTESIZE	(0x020000)
-#define GAYLE_IO		(0xa20000+zTwoBase)	/* 16bit and even 8bit registers */
-#define GAYLE_IOSIZE		(0x010000)
-#define GAYLE_IO_8BITODD	(0xa30000+zTwoBase)	/* odd 8bit registers */
-
-/* offset for accessing odd IO registers */
-#define GAYLE_ODD		(GAYLE_IO_8BITODD-GAYLE_IO-1)
-
-/* GAYLE registers */
-
-struct GAYLE {
-	u_char cardstatus;
-	u_char pad0[0x1000-1];
-
-	u_char intreq;
-	u_char pad1[0x1000-1];
-
-	u_char inten;
-	u_char pad2[0x1000-1];
-
-	u_char config;
-	u_char pad3[0x1000-1];
-};
-
-#define GAYLE_ADDRESS	(0xda8000)	/* gayle main registers base address */
-
-#define GAYLE_RESET	(0xa40000)	/* write 0x00 to start reset,
-                                           read 1 byte to stop reset */
-
-#define gayle (*(volatile struct GAYLE *)(zTwoBase+GAYLE_ADDRESS))
-#define gayle_reset (*(volatile u_char *)(zTwoBase+GAYLE_RESET))
-
-#define gayle_attribute ((volatile u_char *)(GAYLE_ATTRIBUTE))
-
-#if 0
-#define gayle_inb(a) readb( GAYLE_IO+(a)+(((a)&1)*GAYLE_ODD) )
-#define gayle_outb(v,a) writeb( v, GAYLE_IO+(a)+(((a)&1)*GAYLE_ODD) )
-
-#define gayle_inw(a) readw( GAYLE_IO+(a) )
-#define gayle_outw(v,a) writew( v, GAYLE_IO+(a) )
-#endif
-
-/* GAYLE_CARDSTATUS bit def */
-
-#define GAYLE_CS_CCDET		0x40	/* credit card detect */
-#define GAYLE_CS_BVD1		0x20	/* battery voltage detect 1 */
-#define GAYLE_CS_SC		0x20	/* credit card status change */
-#define GAYLE_CS_BVD2		0x10	/* battery voltage detect 2 */
-#define GAYLE_CS_DA		0x10	/* digital audio */
-#define GAYLE_CS_WR		0x08	/* write enable (1 == enabled) */
-#define GAYLE_CS_BSY		0x04	/* credit card busy */
-#define GAYLE_CS_IRQ		0x04	/* interrupt request */
-
-/* GAYLE_IRQ bit def */
-
-#define GAYLE_IRQ_IDE		0x80
-#define GAYLE_IRQ_CCDET		0x40
-#define GAYLE_IRQ_BVD1		0x20
-#define GAYLE_IRQ_SC		0x20
-#define GAYLE_IRQ_BVD2		0x10
-#define GAYLE_IRQ_DA		0x10
-#define GAYLE_IRQ_WR		0x08
-#define GAYLE_IRQ_BSY		0x04
-#define GAYLE_IRQ_IRQ		0x04
-#define GAYLE_IRQ_IDEACK1	0x02
-#define GAYLE_IRQ_IDEACK0	0x01
-
-/* GAYLE_CONFIG bit def
-   (bit 0-1 for program voltage, bit 2-3 for access speed */
-
-#define GAYLE_CFG_0V		0x00
-#define GAYLE_CFG_5V		0x01
-#define GAYLE_CFG_12V		0x02
-
-#define GAYLE_CFG_100NS		0x08
-#define GAYLE_CFG_150NS		0x04
-#define GAYLE_CFG_250NS		0x00
-#define GAYLE_CFG_720NS		0x0c
-
-struct gayle_ide_platform_data {
-	unsigned long base;
-	unsigned long irqport;
-	int explicit_ack;	/* A1200 IDE needs explicit ack */
-};
-
-#endif /* asm-m68k/amigayle.h */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/amipcmcia.h b/ANDROID_3.4.5/arch/m68k/include/asm/amipcmcia.h
deleted file mode 100644
index 6f1ec188..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/amipcmcia.h
+++ /dev/null
@@ -1,110 +0,0 @@
-/*
-** asm-m68k/pcmcia.h -- Amiga Linux PCMCIA Definitions
-**
-** Copyright 1997 by Alain Malek
-**
-** This file is subject to the terms and conditions of the GNU General Public
-** License.  See the file COPYING in the main directory of this archive
-** for more details.
-**
-** Created: 12/10/97 by Alain Malek
-*/
-
-#ifndef __AMIGA_PCMCIA_H__
-#define __AMIGA_PCMCIA_H__
-
-#include <asm/amigayle.h>
-
-/* prototypes */
-
-void pcmcia_reset(void);
-int pcmcia_copy_tuple(unsigned char tuple_id, void *tuple, int max_len);
-void pcmcia_program_voltage(int voltage);
-void pcmcia_access_speed(int speed);
-void pcmcia_write_enable(void);
-void pcmcia_write_disable(void);
-
-static inline u_char pcmcia_read_status(void)
-{
-	return (gayle.cardstatus & 0x7c);
-}
-
-static inline u_char pcmcia_get_intreq(void)
-{
-	return (gayle.intreq);
-}
-
-static inline void pcmcia_ack_int(u_char intreq)
-{
-	gayle.intreq = 0xf8;
-}
-
-static inline void pcmcia_enable_irq(void)
-{
-	gayle.inten |= GAYLE_IRQ_IRQ;
-}
-
-static inline void pcmcia_disable_irq(void)
-{
-	gayle.inten &= ~GAYLE_IRQ_IRQ;
-}
-
-#define PCMCIA_INSERTED	(gayle.cardstatus & GAYLE_CS_CCDET)
-
-/* valid voltages for pcmcia_ProgramVoltage */
-
-#define PCMCIA_0V	0
-#define PCMCIA_5V	5
-#define PCMCIA_12V	12
-
-/* valid speeds for pcmcia_AccessSpeed */
-
-#define PCMCIA_SPEED_100NS	100
-#define PCMCIA_SPEED_150NS	150
-#define PCMCIA_SPEED_250NS	250
-#define PCMCIA_SPEED_720NS	720
-
-/* PCMCIA Tuple codes */
-
-#define CISTPL_NULL		0x00
-#define CISTPL_DEVICE		0x01
-#define CISTPL_LONGLINK_CB	0x02
-#define CISTPL_CONFIG_CB	0x04
-#define CISTPL_CFTABLE_ENTRY_CB	0x05
-#define CISTPL_LONGLINK_MFC	0x06
-#define CISTPL_BAR		0x07
-#define CISTPL_CHECKSUM		0x10
-#define CISTPL_LONGLINK_A	0x11
-#define CISTPL_LONGLINK_C	0x12
-#define CISTPL_LINKTARGET	0x13
-#define CISTPL_NO_LINK		0x14
-#define CISTPL_VERS_1		0x15
-#define CISTPL_ALTSTR		0x16
-#define CISTPL_DEVICE_A		0x17
-#define CISTPL_JEDEC_C		0x18
-#define CISTPL_JEDEC_A		0x19
-#define CISTPL_CONFIG		0x1a
-#define CISTPL_CFTABLE_ENTRY	0x1b
-#define CISTPL_DEVICE_OC	0x1c
-#define CISTPL_DEVICE_OA	0x1d
-#define CISTPL_DEVICE_GEO	0x1e
-#define CISTPL_DEVICE_GEO_A	0x1f
-#define CISTPL_MANFID		0x20
-#define CISTPL_FUNCID		0x21
-#define CISTPL_FUNCE		0x22
-#define CISTPL_SWIL		0x23
-#define CISTPL_END		0xff
-
-/* FUNCID */
-
-#define CISTPL_FUNCID_MULTI	0x00
-#define CISTPL_FUNCID_MEMORY	0x01
-#define CISTPL_FUNCID_SERIAL	0x02
-#define CISTPL_FUNCID_PARALLEL	0x03
-#define CISTPL_FUNCID_FIXED	0x04
-#define CISTPL_FUNCID_VIDEO	0x05
-#define CISTPL_FUNCID_NETWORK	0x06
-#define CISTPL_FUNCID_AIMS	0x07
-#define CISTPL_FUNCID_SCSI	0x08
-
-#endif
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/apollodma.h b/ANDROID_3.4.5/arch/m68k/include/asm/apollodma.h
deleted file mode 100644
index 954adc85..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/apollodma.h
+++ /dev/null
@@ -1,248 +0,0 @@
-/*
- * linux/include/asm/dma.h: Defines for using and allocating dma channels.
- * Written by Hennus Bergman, 1992.
- * High DMA channel support & info by Hannu Savolainen
- * and John Boyd, Nov. 1992.
- */
-
-#ifndef _ASM_APOLLO_DMA_H
-#define _ASM_APOLLO_DMA_H
-
-#include <asm/apollohw.h>		/* need byte IO */
-#include <linux/spinlock.h>		/* And spinlocks */
-#include <linux/delay.h>
-
-
-#define dma_outb(val,addr) (*((volatile unsigned char *)(addr+IO_BASE)) = (val))
-#define dma_inb(addr)	   (*((volatile unsigned char *)(addr+IO_BASE)))
-
-/*
- * NOTES about DMA transfers:
- *
- *  controller 1: channels 0-3, byte operations, ports 00-1F
- *  controller 2: channels 4-7, word operations, ports C0-DF
- *
- *  - ALL registers are 8 bits only, regardless of transfer size
- *  - channel 4 is not used - cascades 1 into 2.
- *  - channels 0-3 are byte - addresses/counts are for physical bytes
- *  - channels 5-7 are word - addresses/counts are for physical words
- *  - transfers must not cross physical 64K (0-3) or 128K (5-7) boundaries
- *  - transfer count loaded to registers is 1 less than actual count
- *  - controller 2 offsets are all even (2x offsets for controller 1)
- *  - page registers for 5-7 don't use data bit 0, represent 128K pages
- *  - page registers for 0-3 use bit 0, represent 64K pages
- *
- * DMA transfers are limited to the lower 16MB of _physical_ memory.
- * Note that addresses loaded into registers must be _physical_ addresses,
- * not logical addresses (which may differ if paging is active).
- *
- *  Address mapping for channels 0-3:
- *
- *   A23 ... A16 A15 ... A8  A7 ... A0    (Physical addresses)
- *    |  ...  |   |  ... |   |  ... |
- *    |  ...  |   |  ... |   |  ... |
- *    |  ...  |   |  ... |   |  ... |
- *   P7  ...  P0  A7 ... A0  A7 ... A0
- * |    Page    | Addr MSB | Addr LSB |   (DMA registers)
- *
- *  Address mapping for channels 5-7:
- *
- *   A23 ... A17 A16 A15 ... A9 A8 A7 ... A1 A0    (Physical addresses)
- *    |  ...  |   \   \   ... \  \  \  ... \  \
- *    |  ...  |    \   \   ... \  \  \  ... \  (not used)
- *    |  ...  |     \   \   ... \  \  \  ... \
- *   P7  ...  P1 (0) A7 A6  ... A0 A7 A6 ... A0
- * |      Page      |  Addr MSB   |  Addr LSB  |   (DMA registers)
- *
- * Again, channels 5-7 transfer _physical_ words (16 bits), so addresses
- * and counts _must_ be word-aligned (the lowest address bit is _ignored_ at
- * the hardware level, so odd-byte transfers aren't possible).
- *
- * Transfer count (_not # bytes_) is limited to 64K, represented as actual
- * count - 1 : 64K => 0xFFFF, 1 => 0x0000.  Thus, count is always 1 or more,
- * and up to 128K bytes may be transferred on channels 5-7 in one operation.
- *
- */
-
-#define MAX_DMA_CHANNELS	8
-
-/* The maximum address that we can perform a DMA transfer to on this platform */#define MAX_DMA_ADDRESS      (PAGE_OFFSET+0x1000000)
-
-/* 8237 DMA controllers */
-#define IO_DMA1_BASE	0x10C00	/* 8 bit slave DMA, channels 0..3 */
-#define IO_DMA2_BASE	0x10D00	/* 16 bit master DMA, ch 4(=slave input)..7 */
-
-/* DMA controller registers */
-#define DMA1_CMD_REG		(IO_DMA1_BASE+0x08) /* command register (w) */
-#define DMA1_STAT_REG		(IO_DMA1_BASE+0x08) /* status register (r) */
-#define DMA1_REQ_REG            (IO_DMA1_BASE+0x09) /* request register (w) */
-#define DMA1_MASK_REG		(IO_DMA1_BASE+0x0A) /* single-channel mask (w) */
-#define DMA1_MODE_REG		(IO_DMA1_BASE+0x0B) /* mode register (w) */
-#define DMA1_CLEAR_FF_REG	(IO_DMA1_BASE+0x0C) /* clear pointer flip-flop (w) */
-#define DMA1_TEMP_REG           (IO_DMA1_BASE+0x0D) /* Temporary Register (r) */
-#define DMA1_RESET_REG		(IO_DMA1_BASE+0x0D) /* Master Clear (w) */
-#define DMA1_CLR_MASK_REG       (IO_DMA1_BASE+0x0E) /* Clear Mask */
-#define DMA1_MASK_ALL_REG       (IO_DMA1_BASE+0x0F) /* all-channels mask (w) */
-
-#define DMA2_CMD_REG		(IO_DMA2_BASE+0x10) /* command register (w) */
-#define DMA2_STAT_REG		(IO_DMA2_BASE+0x10) /* status register (r) */
-#define DMA2_REQ_REG            (IO_DMA2_BASE+0x12) /* request register (w) */
-#define DMA2_MASK_REG		(IO_DMA2_BASE+0x14) /* single-channel mask (w) */
-#define DMA2_MODE_REG		(IO_DMA2_BASE+0x16) /* mode register (w) */
-#define DMA2_CLEAR_FF_REG	(IO_DMA2_BASE+0x18) /* clear pointer flip-flop (w) */
-#define DMA2_TEMP_REG           (IO_DMA2_BASE+0x1A) /* Temporary Register (r) */
-#define DMA2_RESET_REG		(IO_DMA2_BASE+0x1A) /* Master Clear (w) */
-#define DMA2_CLR_MASK_REG       (IO_DMA2_BASE+0x1C) /* Clear Mask */
-#define DMA2_MASK_ALL_REG       (IO_DMA2_BASE+0x1E) /* all-channels mask (w) */
-
-#define DMA_ADDR_0              (IO_DMA1_BASE+0x00) /* DMA address registers */
-#define DMA_ADDR_1              (IO_DMA1_BASE+0x02)
-#define DMA_ADDR_2              (IO_DMA1_BASE+0x04)
-#define DMA_ADDR_3              (IO_DMA1_BASE+0x06)
-#define DMA_ADDR_4              (IO_DMA2_BASE+0x00)
-#define DMA_ADDR_5              (IO_DMA2_BASE+0x04)
-#define DMA_ADDR_6              (IO_DMA2_BASE+0x08)
-#define DMA_ADDR_7              (IO_DMA2_BASE+0x0C)
-
-#define DMA_CNT_0               (IO_DMA1_BASE+0x01)   /* DMA count registers */
-#define DMA_CNT_1               (IO_DMA1_BASE+0x03)
-#define DMA_CNT_2               (IO_DMA1_BASE+0x05)
-#define DMA_CNT_3               (IO_DMA1_BASE+0x07)
-#define DMA_CNT_4               (IO_DMA2_BASE+0x02)
-#define DMA_CNT_5               (IO_DMA2_BASE+0x06)
-#define DMA_CNT_6               (IO_DMA2_BASE+0x0A)
-#define DMA_CNT_7               (IO_DMA2_BASE+0x0E)
-
-#define DMA_MODE_READ	0x44	/* I/O to memory, no autoinit, increment, single mode */
-#define DMA_MODE_WRITE	0x48	/* memory to I/O, no autoinit, increment, single mode */
-#define DMA_MODE_CASCADE 0xC0   /* pass thru DREQ->HRQ, DACK<-HLDA only */
-
-#define DMA_AUTOINIT	0x10
-
-#define DMA_8BIT 0
-#define DMA_16BIT 1
-#define DMA_BUSMASTER 2
-
-extern spinlock_t  dma_spin_lock;
-
-static __inline__ unsigned long claim_dma_lock(void)
-{
-	unsigned long flags;
-	spin_lock_irqsave(&dma_spin_lock, flags);
-	return flags;
-}
-
-static __inline__ void release_dma_lock(unsigned long flags)
-{
-	spin_unlock_irqrestore(&dma_spin_lock, flags);
-}
-
-/* enable/disable a specific DMA channel */
-static __inline__ void enable_dma(unsigned int dmanr)
-{
-	if (dmanr<=3)
-		dma_outb(dmanr,  DMA1_MASK_REG);
-	else
-		dma_outb(dmanr & 3,  DMA2_MASK_REG);
-}
-
-static __inline__ void disable_dma(unsigned int dmanr)
-{
-	if (dmanr<=3)
-		dma_outb(dmanr | 4,  DMA1_MASK_REG);
-	else
-		dma_outb((dmanr & 3) | 4,  DMA2_MASK_REG);
-}
-
-/* Clear the 'DMA Pointer Flip Flop'.
- * Write 0 for LSB/MSB, 1 for MSB/LSB access.
- * Use this once to initialize the FF to a known state.
- * After that, keep track of it. :-)
- * --- In order to do that, the DMA routines below should ---
- * --- only be used while holding the DMA lock ! ---
- */
-static __inline__ void clear_dma_ff(unsigned int dmanr)
-{
-	if (dmanr<=3)
-		dma_outb(0,  DMA1_CLEAR_FF_REG);
-	else
-		dma_outb(0,  DMA2_CLEAR_FF_REG);
-}
-
-/* set mode (above) for a specific DMA channel */
-static __inline__ void set_dma_mode(unsigned int dmanr, char mode)
-{
-	if (dmanr<=3)
-		dma_outb(mode | dmanr,  DMA1_MODE_REG);
-	else
-		dma_outb(mode | (dmanr&3),  DMA2_MODE_REG);
-}
-
-/* Set transfer address & page bits for specific DMA channel.
- * Assumes dma flipflop is clear.
- */
-static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a)
-{
-	if (dmanr <= 3)  {
-	    dma_outb( a & 0xff, ((dmanr&3)<<1) + IO_DMA1_BASE );
-            dma_outb( (a>>8) & 0xff, ((dmanr&3)<<1) + IO_DMA1_BASE );
-	}  else  {
-	    dma_outb( (a>>1) & 0xff, ((dmanr&3)<<2) + IO_DMA2_BASE );
-	    dma_outb( (a>>9) & 0xff, ((dmanr&3)<<2) + IO_DMA2_BASE );
-	}
-}
-
-
-/* Set transfer size (max 64k for DMA1..3, 128k for DMA5..7) for
- * a specific DMA channel.
- * You must ensure the parameters are valid.
- * NOTE: from a manual: "the number of transfers is one more
- * than the initial word count"! This is taken into account.
- * Assumes dma flip-flop is clear.
- * NOTE 2: "count" represents _bytes_ and must be even for channels 5-7.
- */
-static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count)
-{
-        count--;
-	if (dmanr <= 3)  {
-	    dma_outb( count & 0xff, ((dmanr&3)<<1) + 1 + IO_DMA1_BASE );
-	    dma_outb( (count>>8) & 0xff, ((dmanr&3)<<1) + 1 + IO_DMA1_BASE );
-        } else {
-	    dma_outb( (count>>1) & 0xff, ((dmanr&3)<<2) + 2 + IO_DMA2_BASE );
-	    dma_outb( (count>>9) & 0xff, ((dmanr&3)<<2) + 2 + IO_DMA2_BASE );
-        }
-}
-
-
-/* Get DMA residue count. After a DMA transfer, this
- * should return zero. Reading this while a DMA transfer is
- * still in progress will return unpredictable results.
- * If called before the channel has been used, it may return 1.
- * Otherwise, it returns the number of _bytes_ left to transfer.
- *
- * Assumes DMA flip-flop is clear.
- */
-static __inline__ int get_dma_residue(unsigned int dmanr)
-{
-	unsigned int io_port = (dmanr<=3)? ((dmanr&3)<<1) + 1 + IO_DMA1_BASE
-					 : ((dmanr&3)<<2) + 2 + IO_DMA2_BASE;
-
-	/* using short to get 16-bit wrap around */
-	unsigned short count;
-
-	count = 1 + dma_inb(io_port);
-	count += dma_inb(io_port) << 8;
-
-	return (dmanr<=3)? count : (count<<1);
-}
-
-
-/* These are in kernel/dma.c: */
-extern int request_dma(unsigned int dmanr, const char * device_id);	/* reserve a DMA channel */
-extern void free_dma(unsigned int dmanr);	/* release it again */
-
-/* These are in arch/m68k/apollo/dma.c: */
-extern unsigned short dma_map_page(unsigned long phys_addr,int count,int type);
-extern void dma_unmap_page(unsigned short dma_addr);
-
-#endif /* _ASM_APOLLO_DMA_H */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/apollohw.h b/ANDROID_3.4.5/arch/m68k/include/asm/apollohw.h
deleted file mode 100644
index a1373b9a..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/apollohw.h
+++ /dev/null
@@ -1,108 +0,0 @@
-/* apollohw.h : some structures to access apollo HW */
-
-#ifndef _ASMm68k_APOLLOHW_H_
-#define _ASMm68k_APOLLOHW_H_
-
-#include <linux/types.h>
-
-/*
-   apollo models
-*/
-
-extern u_long apollo_model;
-
-#define APOLLO_UNKNOWN (0)
-#define APOLLO_DN3000 (1)
-#define APOLLO_DN3010 (2)
-#define APOLLO_DN3500 (3)
-#define APOLLO_DN4000 (4)
-#define APOLLO_DN4500 (5)
-
-/*
-   see scn2681 data sheet for more info.
-   member names are read_write.
-*/
-
-#define DECLARE_2681_FIELD(x) unsigned char x; unsigned char dummy##x
-
-struct SCN2681 {
-
-	DECLARE_2681_FIELD(mra);
-	DECLARE_2681_FIELD(sra_csra);
-	DECLARE_2681_FIELD(BRGtest_cra);
-	DECLARE_2681_FIELD(rhra_thra);
-	DECLARE_2681_FIELD(ipcr_acr);
-	DECLARE_2681_FIELD(isr_imr);
-	DECLARE_2681_FIELD(ctu_ctur);
-	DECLARE_2681_FIELD(ctl_ctlr);
-	DECLARE_2681_FIELD(mrb);
-	DECLARE_2681_FIELD(srb_csrb);
-	DECLARE_2681_FIELD(tst_crb);
-	DECLARE_2681_FIELD(rhrb_thrb);
-	DECLARE_2681_FIELD(reserved);
-	DECLARE_2681_FIELD(ip_opcr);
-	DECLARE_2681_FIELD(startCnt_setOutBit);
-	DECLARE_2681_FIELD(stopCnt_resetOutBit);
-
-};
-
-#if 0
-struct mc146818 {
-
-	unsigned int second1:4, second2:4, alarm_second1:4, alarm_second2:4,
-		     minute1:4, minute2:4, alarm_minute1:4, alarm_minute2:4;
-	unsigned int hours1:4, hours2:4, alarm_hours1:4, alarm_hours2:4,
-		     day_of_week1:4, day_of_week2:4, day_of_month1:4, day_of_month2:4;
-	unsigned int month1:4, month2:4, year1:4, year2:4, :16;
-
-};
-#endif
-
-struct mc146818 {
-        unsigned char second, alarm_second;
-        unsigned char minute, alarm_minute;
-        unsigned char hours, alarm_hours;
-        unsigned char day_of_week, day_of_month;
-        unsigned char month, year;
-};
-
-
-#define IO_BASE 0x80000000
-
-extern u_long sio01_physaddr;
-extern u_long sio23_physaddr;
-extern u_long rtc_physaddr;
-extern u_long pica_physaddr;
-extern u_long picb_physaddr;
-extern u_long cpuctrl_physaddr;
-extern u_long timer_physaddr;
-
-#define SAU7_SIO01_PHYSADDR 0x10400
-#define SAU7_SIO23_PHYSADDR 0x10500
-#define SAU7_RTC_PHYSADDR 0x10900
-#define SAU7_PICA 0x11000
-#define SAU7_PICB 0x11100
-#define SAU7_CPUCTRL 0x10100
-#define SAU7_TIMER 0x010800
-
-#define SAU8_SIO01_PHYSADDR 0x8400
-#define SAU8_RTC_PHYSADDR 0x8900
-#define SAU8_PICA 0x9400
-#define SAU8_PICB 0x9500
-#define SAU8_CPUCTRL 0x8100
-#define SAU8_TIMER 0x8800
-
-#define sio01 ((*(volatile struct SCN2681 *)(IO_BASE + sio01_physaddr)))
-#define sio23 ((*(volatile struct SCN2681 *)(IO_BASE + sio23_physaddr)))
-#define rtc (((volatile struct mc146818 *)(IO_BASE + rtc_physaddr)))
-#define cpuctrl (*(volatile unsigned int *)(IO_BASE + cpuctrl_physaddr))
-#define pica (IO_BASE + pica_physaddr)
-#define picb (IO_BASE + picb_physaddr)
-#define timer (IO_BASE + timer_physaddr)
-#define addr_xlat_map ((unsigned short *)(IO_BASE + 0x17000))
-
-#define isaIO2mem(x) (((((x) & 0x3f8)  << 7) | (((x) & 0xfc00) >> 6) | ((x) & 0x7)) + 0x40000 + IO_BASE)
-
-#define IRQ_APOLLO	IRQ_USER
-
-#endif
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/asm-offsets.h b/ANDROID_3.4.5/arch/m68k/include/asm/asm-offsets.h
deleted file mode 100644
index d370ee36..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/asm-offsets.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <generated/asm-offsets.h>
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/atafd.h b/ANDROID_3.4.5/arch/m68k/include/asm/atafd.h
deleted file mode 100644
index 8456889e..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/atafd.h
+++ /dev/null
@@ -1,12 +0,0 @@
-#ifndef _ASM_M68K_FD_H
-#define _ASM_M68K_FD_H
-
-/* Definitions for the Atari Floppy driver */
-
-struct atari_format_descr {
-    int track;			/* to be formatted */
-    int head;			/*   ""     ""     */
-    int sect_offset;		/* offset of first sector */
-};
-
-#endif
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/atafdreg.h b/ANDROID_3.4.5/arch/m68k/include/asm/atafdreg.h
deleted file mode 100644
index bbf80949..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/atafdreg.h
+++ /dev/null
@@ -1,79 +0,0 @@
-#ifndef _LINUX_FDREG_H
-#define _LINUX_FDREG_H
-
-/*
-** WD1772 stuff
- */
-
-/* register codes */
-
-#define FDCSELREG_STP   (0x80)   /* command/status register */
-#define FDCSELREG_TRA   (0x82)   /* track register */
-#define FDCSELREG_SEC   (0x84)   /* sector register */
-#define FDCSELREG_DTA   (0x86)   /* data register */
-
-/* register names for FDC_READ/WRITE macros */
-
-#define FDCREG_CMD		0
-#define FDCREG_STATUS	0
-#define FDCREG_TRACK	2
-#define FDCREG_SECTOR	4
-#define FDCREG_DATA		6
-
-/* command opcodes */
-
-#define FDCCMD_RESTORE  (0x00)   /*  -                   */
-#define FDCCMD_SEEK     (0x10)   /*   |                  */
-#define FDCCMD_STEP     (0x20)   /*   |  TYP 1 Commands  */
-#define FDCCMD_STIN     (0x40)   /*   |                  */
-#define FDCCMD_STOT     (0x60)   /*  -                   */
-#define FDCCMD_RDSEC    (0x80)   /*  -   TYP 2 Commands  */
-#define FDCCMD_WRSEC    (0xa0)   /*  -          "        */
-#define FDCCMD_RDADR    (0xc0)   /*  -                   */
-#define FDCCMD_RDTRA    (0xe0)   /*   |  TYP 3 Commands  */
-#define FDCCMD_WRTRA    (0xf0)   /*  -                   */
-#define FDCCMD_FORCI    (0xd0)   /*  -   TYP 4 Command   */
-
-/* command modifier bits */
-
-#define FDCCMDADD_SR6   (0x00)   /* step rate settings */
-#define FDCCMDADD_SR12  (0x01)
-#define FDCCMDADD_SR2   (0x02)
-#define FDCCMDADD_SR3   (0x03)
-#define FDCCMDADD_V     (0x04)   /* verify */
-#define FDCCMDADD_H     (0x08)   /* wait for spin-up */
-#define FDCCMDADD_U     (0x10)   /* update track register */
-#define FDCCMDADD_M     (0x10)   /* multiple sector access */
-#define FDCCMDADD_E     (0x04)   /* head settling flag */
-#define FDCCMDADD_P     (0x02)   /* precompensation off */
-#define FDCCMDADD_A0    (0x01)   /* DAM flag */
-
-/* status register bits */
-
-#define	FDCSTAT_MOTORON	(0x80)   /* motor on */
-#define	FDCSTAT_WPROT	(0x40)   /* write protected (FDCCMD_WR*) */
-#define	FDCSTAT_SPINUP	(0x20)   /* motor speed stable (Type I) */
-#define	FDCSTAT_DELDAM	(0x20)   /* sector has deleted DAM (Type II+III) */
-#define	FDCSTAT_RECNF	(0x10)   /* record not found */
-#define	FDCSTAT_CRC		(0x08)   /* CRC error */
-#define	FDCSTAT_TR00	(0x04)   /* Track 00 flag (Type I) */
-#define	FDCSTAT_LOST	(0x04)   /* Lost Data (Type II+III) */
-#define	FDCSTAT_IDX		(0x02)   /* Index status (Type I) */
-#define	FDCSTAT_DRQ		(0x02)   /* DRQ status (Type II+III) */
-#define	FDCSTAT_BUSY	(0x01)   /* FDC is busy */
-
-
-/* PSG Port A Bit Nr 0 .. Side Sel .. 0 -> Side 1  1 -> Side 2 */
-#define DSKSIDE     (0x01)
-
-#define DSKDRVNONE  (0x06)
-#define DSKDRV0     (0x02)
-#define DSKDRV1     (0x04)
-
-/* step rates */
-#define	FDCSTEP_6	0x00
-#define	FDCSTEP_12	0x01
-#define	FDCSTEP_2	0x02
-#define	FDCSTEP_3	0x03
-
-#endif
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/atari_joystick.h b/ANDROID_3.4.5/arch/m68k/include/asm/atari_joystick.h
deleted file mode 100644
index 93be7da9..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/atari_joystick.h
+++ /dev/null
@@ -1,22 +0,0 @@
-#ifndef _LINUX_ATARI_JOYSTICK_H
-#define _LINUX_ATARI_JOYSTICK_H
-
-/*
- * linux/include/linux/atari_joystick.h
- * header file for Atari Joystick driver
- * by Robert de Vries (robert@and.nl) on 19Jul93
- */
-
-void atari_joystick_interrupt(char*);
-int atari_joystick_init(void);
-extern int atari_mouse_buttons;
-
-struct joystick_status {
-	char		fire;
-	char		dir;
-	int		ready;
-	int		active;
-	wait_queue_head_t wait;
-};
-
-#endif
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/atari_stdma.h b/ANDROID_3.4.5/arch/m68k/include/asm/atari_stdma.h
deleted file mode 100644
index 8e389b7f..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/atari_stdma.h
+++ /dev/null
@@ -1,22 +0,0 @@
-
-#ifndef _atari_stdma_h
-#define _atari_stdma_h
-
-
-#include <linux/interrupt.h>
-
-
-/***************************** Prototypes *****************************/
-
-void stdma_lock(irq_handler_t handler, void *data);
-void stdma_release( void );
-int stdma_others_waiting( void );
-int stdma_islocked( void );
-void *stdma_locked_by( void );
-void stdma_init( void );
-
-/************************* End of Prototypes **************************/
-
-
-
-#endif  /* _atari_stdma_h */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/atari_stram.h b/ANDROID_3.4.5/arch/m68k/include/asm/atari_stram.h
deleted file mode 100644
index 62e27598..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/atari_stram.h
+++ /dev/null
@@ -1,16 +0,0 @@
-#ifndef _M68K_ATARI_STRAM_H
-#define _M68K_ATARI_STRAM_H
-
-/*
- * Functions for Atari ST-RAM management
- */
-
-/* public interface */
-void *atari_stram_alloc(unsigned long size, const char *owner);
-void atari_stram_free(void *);
-
-/* functions called internally by other parts of the kernel */
-void atari_stram_init(void);
-void atari_stram_reserve_pages(void *start_mem);
-
-#endif /*_M68K_ATARI_STRAM_H */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/atarihw.h b/ANDROID_3.4.5/arch/m68k/include/asm/atarihw.h
deleted file mode 100644
index c0cb3635..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/atarihw.h
+++ /dev/null
@@ -1,809 +0,0 @@
-/*
-** linux/atarihw.h -- This header defines some macros and pointers for
-**                    the various Atari custom hardware registers.
-**
-** Copyright 1994 by Björn Brauel
-**
-** 5/1/94 Roman Hodek:
-**   Added definitions for TT specific chips.
-**
-** 1996-09-13 lars brinkhoff <f93labr@dd.chalmers.se>:
-**   Finally added definitions for the matrix/codec and the DSP56001 host
-**   interface.
-**
-** This file is subject to the terms and conditions of the GNU General Public
-** License.  See the file COPYING in the main directory of this archive
-** for more details.
-**
-*/
-
-#ifndef _LINUX_ATARIHW_H_
-#define _LINUX_ATARIHW_H_
-
-#include <linux/types.h>
-#include <asm/bootinfo.h>
-#include <asm/raw_io.h>
-
-extern u_long atari_mch_cookie;
-extern u_long atari_mch_type;
-extern u_long atari_switches;
-extern int atari_rtc_year_offset;
-extern int atari_dont_touch_floppy_select;
-
-extern int atari_SCC_reset_done;
-
-/* convenience macros for testing machine type */
-#define MACH_IS_ST	((atari_mch_cookie >> 16) == ATARI_MCH_ST)
-#define MACH_IS_STE	((atari_mch_cookie >> 16) == ATARI_MCH_STE && \
-			 (atari_mch_cookie & 0xffff) == 0)
-#define MACH_IS_MSTE	((atari_mch_cookie >> 16) == ATARI_MCH_STE && \
-			 (atari_mch_cookie & 0xffff) == 0x10)
-#define MACH_IS_TT	((atari_mch_cookie >> 16) == ATARI_MCH_TT)
-#define MACH_IS_FALCON	((atari_mch_cookie >> 16) == ATARI_MCH_FALCON)
-#define MACH_IS_MEDUSA	(atari_mch_type == ATARI_MACH_MEDUSA)
-#define MACH_IS_AB40	(atari_mch_type == ATARI_MACH_AB40)
-
-/* values for atari_switches */
-#define ATARI_SWITCH_IKBD	0x01
-#define ATARI_SWITCH_MIDI	0x02
-#define ATARI_SWITCH_SND6	0x04
-#define ATARI_SWITCH_SND7	0x08
-#define ATARI_SWITCH_OVSC_SHIFT	16
-#define ATARI_SWITCH_OVSC_IKBD	(ATARI_SWITCH_IKBD << ATARI_SWITCH_OVSC_SHIFT)
-#define ATARI_SWITCH_OVSC_MIDI	(ATARI_SWITCH_MIDI << ATARI_SWITCH_OVSC_SHIFT)
-#define ATARI_SWITCH_OVSC_SND6	(ATARI_SWITCH_SND6 << ATARI_SWITCH_OVSC_SHIFT)
-#define ATARI_SWITCH_OVSC_SND7	(ATARI_SWITCH_SND7 << ATARI_SWITCH_OVSC_SHIFT)
-#define ATARI_SWITCH_OVSC_MASK	0xffff0000
-
-/*
- * Define several Hardware-Chips for indication so that for the ATARI we do
- * no longer decide whether it is a Falcon or other machine . It's just
- * important what hardware the machine uses
- */
-
-/* ++roman 08/08/95: rewritten from ORing constants to a C bitfield */
-
-#define ATARIHW_DECLARE(name)	unsigned name : 1
-#define ATARIHW_SET(name)	(atari_hw_present.name = 1)
-#define ATARIHW_PRESENT(name)	(atari_hw_present.name)
-
-struct atari_hw_present {
-    /* video hardware */
-    ATARIHW_DECLARE(STND_SHIFTER);	/* ST-Shifter - no base low ! */
-    ATARIHW_DECLARE(EXTD_SHIFTER);	/* STe-Shifter - 24 bit address */
-    ATARIHW_DECLARE(TT_SHIFTER);	/* TT-Shifter */
-    ATARIHW_DECLARE(VIDEL_SHIFTER);	/* Falcon-Shifter */
-    /* sound hardware */
-    ATARIHW_DECLARE(YM_2149);		/* Yamaha YM 2149 */
-    ATARIHW_DECLARE(PCM_8BIT);		/* PCM-Sound in STe-ATARI */
-    ATARIHW_DECLARE(CODEC);		/* CODEC Sound (Falcon) */
-    /* disk storage interfaces */
-    ATARIHW_DECLARE(TT_SCSI);		/* Directly mapped NCR5380 */
-    ATARIHW_DECLARE(ST_SCSI);		/* NCR5380 via ST-DMA (Falcon) */
-    ATARIHW_DECLARE(ACSI);		/* Standard ACSI like in STs */
-    ATARIHW_DECLARE(IDE);		/* IDE Interface */
-    ATARIHW_DECLARE(FDCSPEED);		/* 8/16 MHz switch for FDC */
-    /* other I/O hardware */
-    ATARIHW_DECLARE(ST_MFP);		/* The ST-MFP (there should be no Atari
-					   without it... but who knows?) */
-    ATARIHW_DECLARE(TT_MFP);		/* 2nd MFP */
-    ATARIHW_DECLARE(SCC);		/* Serial Communications Contr. */
-    ATARIHW_DECLARE(ST_ESCC);		/* SCC Z83230 in an ST */
-    ATARIHW_DECLARE(ANALOG_JOY);	/* Paddle Interface for STe
-					   and Falcon */
-    ATARIHW_DECLARE(MICROWIRE);		/* Microwire Interface */
-    /* DMA */
-    ATARIHW_DECLARE(STND_DMA);		/* 24 Bit limited ST-DMA */
-    ATARIHW_DECLARE(EXTD_DMA);		/* 32 Bit ST-DMA */
-    ATARIHW_DECLARE(SCSI_DMA);		/* DMA for the NCR5380 */
-    ATARIHW_DECLARE(SCC_DMA);		/* DMA for the SCC */
-    /* real time clocks */
-    ATARIHW_DECLARE(TT_CLK);		/* TT compatible clock chip */
-    ATARIHW_DECLARE(MSTE_CLK);		/* Mega ST(E) clock chip */
-    /* supporting hardware */
-    ATARIHW_DECLARE(SCU);		/* System Control Unit */
-    ATARIHW_DECLARE(BLITTER);		/* Blitter */
-    ATARIHW_DECLARE(VME);		/* VME Bus */
-    ATARIHW_DECLARE(DSP56K);		/* DSP56k processor in Falcon */
-};
-
-extern struct atari_hw_present atari_hw_present;
-
-
-/* Reading the MFP port register gives a machine independent delay, since the
- * MFP always has a 8 MHz clock. This avoids problems with the varying length
- * of nops on various machines. Somebody claimed that the tstb takes 600 ns.
- */
-#define	MFPDELAY() \
-	__asm__ __volatile__ ( "tstb %0" : : "m" (st_mfp.par_dt_reg) : "cc" );
-
-/* Do cache push/invalidate for DMA read/write. This function obeys the
- * snooping on some machines (Medusa) and processors: The Medusa itself can
- * snoop, but only the '040 can source data from its cache to DMA writes i.e.,
- * reads from memory). Both '040 and '060 invalidate cache entries on snooped
- * DMA reads (i.e., writes to memory).
- */
-
-
-#define atari_readb   raw_inb
-#define atari_writeb  raw_outb
-
-#define atari_inb_p   raw_inb
-#define atari_outb_p  raw_outb
-
-
-
-#include <linux/mm.h>
-#include <asm/cacheflush.h>
-
-static inline void dma_cache_maintenance( unsigned long paddr,
-					  unsigned long len,
-					  int writeflag )
-
-{
-	if (writeflag) {
-		if (!MACH_IS_MEDUSA || CPU_IS_060)
-			cache_push( paddr, len );
-	}
-	else {
-		if (!MACH_IS_MEDUSA)
-			cache_clear( paddr, len );
-	}
-}
-
-
-/*
-** Shifter
- */
-#define ST_LOW  0
-#define ST_MID  1
-#define ST_HIGH 2
-#define TT_LOW  7
-#define TT_MID  4
-#define TT_HIGH 6
-
-#define SHF_BAS (0xffff8200)
-struct SHIFTER
- {
-	u_char pad1;
-	u_char bas_hi;
-	u_char pad2;
-	u_char bas_md;
-	u_char pad3;
-	u_char volatile vcounthi;
-	u_char pad4;
-	u_char volatile vcountmid;
-	u_char pad5;
-	u_char volatile vcountlow;
-	u_char volatile syncmode;
-	u_char pad6;
-	u_char pad7;
-	u_char bas_lo;
- };
-# define shifter ((*(volatile struct SHIFTER *)SHF_BAS))
-
-#define SHF_FBAS (0xffff820e)
-struct SHIFTER_F030
- {
-  u_short off_next;
-  u_short scn_width;
- };
-# define shifter_f030 ((*(volatile struct SHIFTER_F030 *)SHF_FBAS))
-
-
-#define	SHF_TBAS (0xffff8200)
-struct SHIFTER_TT {
-	u_char	char_dummy0;
-	u_char	bas_hi;			/* video mem base addr, high and mid byte */
-	u_char	char_dummy1;
-	u_char	bas_md;
-	u_char	char_dummy2;
-	u_char	vcount_hi;		/* pointer to currently displayed byte */
-	u_char	char_dummy3;
-	u_char	vcount_md;
-	u_char	char_dummy4;
-	u_char	vcount_lo;
-	u_short	st_sync;		/* ST compatible sync mode register, unused */
-	u_char	char_dummy5;
-	u_char	bas_lo;			/* video mem addr, low byte */
-	u_char	char_dummy6[2+3*16];
-	/* $ffff8240: */
-	u_short	color_reg[16];	/* 16 color registers */
-	u_char	st_shiftmode;	/* ST compatible shift mode register, unused */
-	u_char  char_dummy7;
-	u_short tt_shiftmode;	/* TT shift mode register */
-
-
-};
-#define	shifter_tt	((*(volatile struct SHIFTER_TT *)SHF_TBAS))
-
-/* values for shifter_tt->tt_shiftmode */
-#define	TT_SHIFTER_STLOW		0x0000
-#define	TT_SHIFTER_STMID		0x0100
-#define	TT_SHIFTER_STHIGH		0x0200
-#define	TT_SHIFTER_TTLOW		0x0700
-#define	TT_SHIFTER_TTMID		0x0400
-#define	TT_SHIFTER_TTHIGH		0x0600
-#define	TT_SHIFTER_MODEMASK	0x0700
-#define TT_SHIFTER_NUMMODE	0x0008
-#define	TT_SHIFTER_PALETTE_MASK	0x000f
-#define	TT_SHIFTER_GRAYMODE		0x1000
-
-/* 256 TT palette registers */
-#define	TT_PALETTE_BASE	(0xffff8400)
-#define	tt_palette	((volatile u_short *)TT_PALETTE_BASE)
-
-#define	TT_PALETTE_RED_MASK		0x0f00
-#define	TT_PALETTE_GREEN_MASK	0x00f0
-#define	TT_PALETTE_BLUE_MASK	0x000f
-
-/*
-** Falcon030 VIDEL Video Controller
-** for description see File 'linux\tools\atari\hardware.txt
- */
-#define f030_col ((u_long *)		0xffff9800)
-#define f030_xreg ((u_short*)		0xffff8282)
-#define f030_yreg ((u_short*)		0xffff82a2)
-#define f030_creg ((u_short*)		0xffff82c0)
-#define f030_sreg ((u_short*)		0xffff8260)
-#define f030_mreg ((u_short*)		0xffff820a)
-#define f030_linewidth ((u_short*)      0xffff820e)
-#define f030_hscroll ((u_char*)		0xffff8265)
-
-#define VIDEL_BAS (0xffff8260)
-struct VIDEL {
-	u_short st_shift;
-	u_short pad1;
-	u_char  xoffset_s;
-	u_char  xoffset;
-	u_short f_shift;
-	u_char  pad2[0x1a];
-	u_short hht;
-	u_short hbb;
-	u_short hbe;
-	u_short hdb;
-	u_short hde;
-	u_short hss;
-	u_char  pad3[0x14];
-	u_short vft;
-	u_short vbb;
-	u_short vbe;
-	u_short vdb;
-	u_short vde;
-	u_short vss;
-	u_char  pad4[0x12];
-	u_short control;
-	u_short mode;
-};
-#define	videl	((*(volatile struct VIDEL *)VIDEL_BAS))
-
-/*
-** DMA/WD1772 Disk Controller
- */
-
-#define FWD_BAS (0xffff8604)
-struct DMA_WD
- {
-  u_short fdc_acces_seccount;
-  u_short dma_mode_status;
-  u_char dma_vhi;	/* Some extended ST-DMAs can handle 32 bit addresses */
-  u_char dma_hi;
-  u_char char_dummy2;
-  u_char dma_md;
-  u_char char_dummy3;
-  u_char dma_lo;
-  u_short fdc_speed;
- };
-# define dma_wd ((*(volatile struct DMA_WD *)FWD_BAS))
-/* alias */
-#define	st_dma dma_wd
-/* The two highest bytes of an extended DMA as a short; this is a must
- * for the Medusa.
- */
-#define st_dma_ext_dmahi (*((volatile unsigned short *)0xffff8608))
-
-/*
-** YM2149 Sound Chip
-** access in bytes
- */
-
-#define YM_BAS (0xffff8800)
-struct SOUND_YM
- {
-  u_char rd_data_reg_sel;
-  u_char char_dummy1;
-  u_char wd_data;
- };
-#define sound_ym ((*(volatile struct SOUND_YM *)YM_BAS))
-
-/* TT SCSI DMA */
-
-#define	TT_SCSI_DMA_BAS	(0xffff8700)
-struct TT_DMA {
-	u_char	char_dummy0;
-	u_char	dma_addr_hi;
-	u_char	char_dummy1;
-	u_char	dma_addr_hmd;
-	u_char	char_dummy2;
-	u_char	dma_addr_lmd;
-	u_char	char_dummy3;
-	u_char	dma_addr_lo;
-	u_char	char_dummy4;
-	u_char	dma_cnt_hi;
-	u_char	char_dummy5;
-	u_char	dma_cnt_hmd;
-	u_char	char_dummy6;
-	u_char	dma_cnt_lmd;
-	u_char	char_dummy7;
-	u_char	dma_cnt_lo;
-	u_long	dma_restdata;
-	u_short	dma_ctrl;
-};
-#define	tt_scsi_dma	((*(volatile struct TT_DMA *)TT_SCSI_DMA_BAS))
-
-/* TT SCSI Controller 5380 */
-
-#define	TT_5380_BAS	(0xffff8781)
-struct TT_5380 {
-	u_char	scsi_data;
-	u_char	char_dummy1;
-	u_char	scsi_icr;
-	u_char	char_dummy2;
-	u_char	scsi_mode;
-	u_char	char_dummy3;
-	u_char	scsi_tcr;
-	u_char	char_dummy4;
-	u_char	scsi_idstat;
-	u_char	char_dummy5;
-	u_char	scsi_dmastat;
-	u_char	char_dummy6;
-	u_char	scsi_targrcv;
-	u_char	char_dummy7;
-	u_char	scsi_inircv;
-};
-#define	tt_scsi			((*(volatile struct TT_5380 *)TT_5380_BAS))
-#define	tt_scsi_regp	((volatile char *)TT_5380_BAS)
-
-
-/*
-** Falcon DMA Sound Subsystem
- */
-
-#define MATRIX_BASE (0xffff8930)
-struct MATRIX
-{
-  u_short source;
-  u_short destination;
-  u_char external_frequency_divider;
-  u_char internal_frequency_divider;
-};
-#define falcon_matrix (*(volatile struct MATRIX *)MATRIX_BASE)
-
-#define CODEC_BASE (0xffff8936)
-struct CODEC
-{
-  u_char tracks;
-  u_char input_source;
-#define CODEC_SOURCE_ADC        1
-#define CODEC_SOURCE_MATRIX     2
-  u_char adc_source;
-#define ADC_SOURCE_RIGHT_PSG    1
-#define ADC_SOURCE_LEFT_PSG     2
-  u_char gain;
-#define CODEC_GAIN_RIGHT        0x0f
-#define CODEC_GAIN_LEFT         0xf0
-  u_char attenuation;
-#define CODEC_ATTENUATION_RIGHT 0x0f
-#define CODEC_ATTENUATION_LEFT  0xf0
-  u_char unused1;
-  u_char status;
-#define CODEC_OVERFLOW_RIGHT    1
-#define CODEC_OVERFLOW_LEFT     2
-  u_char unused2, unused3, unused4, unused5;
-  u_char gpio_directions;
-#define CODEC_GPIO_IN           0
-#define CODEC_GPIO_OUT          1
-  u_char unused6;
-  u_char gpio_data;
-};
-#define falcon_codec (*(volatile struct CODEC *)CODEC_BASE)
-
-/*
-** Falcon Blitter
-*/
-
-#define BLT_BAS (0xffff8a00)
-
-struct BLITTER
- {
-  u_short halftone[16];
-  u_short src_x_inc;
-  u_short src_y_inc;
-  u_long src_address;
-  u_short endmask1;
-  u_short endmask2;
-  u_short endmask3;
-  u_short dst_x_inc;
-  u_short dst_y_inc;
-  u_long dst_address;
-  u_short wd_per_line;
-  u_short ln_per_bb;
-  u_short hlf_op_reg;
-  u_short log_op_reg;
-  u_short lin_nm_reg;
-  u_short skew_reg;
- };
-# define blitter ((*(volatile struct BLITTER *)BLT_BAS))
-
-
-/*
-** SCC Z8530
- */
-
-#define SCC_BAS (0xffff8c81)
-struct SCC
- {
-  u_char cha_a_ctrl;
-  u_char char_dummy1;
-  u_char cha_a_data;
-  u_char char_dummy2;
-  u_char cha_b_ctrl;
-  u_char char_dummy3;
-  u_char cha_b_data;
- };
-# define atari_scc ((*(volatile struct SCC*)SCC_BAS))
-
-/* The ESCC (Z85230) in an Atari ST. The channels are reversed! */
-# define st_escc ((*(volatile struct SCC*)0xfffffa31))
-# define st_escc_dsr ((*(volatile char *)0xfffffa39))
-
-/* TT SCC DMA Controller (same chip as SCSI DMA) */
-
-#define	TT_SCC_DMA_BAS	(0xffff8c00)
-#define	tt_scc_dma	((*(volatile struct TT_DMA *)TT_SCC_DMA_BAS))
-
-/*
-** VIDEL Palette Register
- */
-
-#define FPL_BAS (0xffff9800)
-struct VIDEL_PALETTE
- {
-  u_long reg[256];
- };
-# define videl_palette ((*(volatile struct VIDEL_PALETTE*)FPL_BAS))
-
-
-/*
-** Falcon DSP Host Interface
- */
-
-#define DSP56K_HOST_INTERFACE_BASE (0xffffa200)
-struct DSP56K_HOST_INTERFACE {
-  u_char icr;
-#define DSP56K_ICR_RREQ	0x01
-#define DSP56K_ICR_TREQ	0x02
-#define DSP56K_ICR_HF0	0x08
-#define DSP56K_ICR_HF1	0x10
-#define DSP56K_ICR_HM0	0x20
-#define DSP56K_ICR_HM1	0x40
-#define DSP56K_ICR_INIT	0x80
-
-  u_char cvr;
-#define DSP56K_CVR_HV_MASK 0x1f
-#define DSP56K_CVR_HC	0x80
-
-  u_char isr;
-#define DSP56K_ISR_RXDF	0x01
-#define DSP56K_ISR_TXDE	0x02
-#define DSP56K_ISR_TRDY	0x04
-#define DSP56K_ISR_HF2	0x08
-#define DSP56K_ISR_HF3	0x10
-#define DSP56K_ISR_DMA	0x40
-#define DSP56K_ISR_HREQ	0x80
-
-  u_char ivr;
-
-  union {
-    u_char b[4];
-    u_short w[2];
-    u_long l;
-  } data;
-};
-#define dsp56k_host_interface ((*(volatile struct DSP56K_HOST_INTERFACE *)DSP56K_HOST_INTERFACE_BASE))
-
-/*
-** MFP 68901
- */
-
-#define MFP_BAS (0xfffffa01)
-struct MFP
- {
-  u_char par_dt_reg;
-  u_char char_dummy1;
-  u_char active_edge;
-  u_char char_dummy2;
-  u_char data_dir;
-  u_char char_dummy3;
-  u_char int_en_a;
-  u_char char_dummy4;
-  u_char int_en_b;
-  u_char char_dummy5;
-  u_char int_pn_a;
-  u_char char_dummy6;
-  u_char int_pn_b;
-  u_char char_dummy7;
-  u_char int_sv_a;
-  u_char char_dummy8;
-  u_char int_sv_b;
-  u_char char_dummy9;
-  u_char int_mk_a;
-  u_char char_dummy10;
-  u_char int_mk_b;
-  u_char char_dummy11;
-  u_char vec_adr;
-  u_char char_dummy12;
-  u_char tim_ct_a;
-  u_char char_dummy13;
-  u_char tim_ct_b;
-  u_char char_dummy14;
-  u_char tim_ct_cd;
-  u_char char_dummy15;
-  u_char tim_dt_a;
-  u_char char_dummy16;
-  u_char tim_dt_b;
-  u_char char_dummy17;
-  u_char tim_dt_c;
-  u_char char_dummy18;
-  u_char tim_dt_d;
-  u_char char_dummy19;
-  u_char sync_char;
-  u_char char_dummy20;
-  u_char usart_ctr;
-  u_char char_dummy21;
-  u_char rcv_stat;
-  u_char char_dummy22;
-  u_char trn_stat;
-  u_char char_dummy23;
-  u_char usart_dta;
- };
-# define st_mfp ((*(volatile struct MFP*)MFP_BAS))
-
-/* TT's second MFP */
-
-#define	TT_MFP_BAS	(0xfffffa81)
-# define tt_mfp ((*(volatile struct MFP*)TT_MFP_BAS))
-
-
-/* TT System Control Unit */
-
-#define	TT_SCU_BAS	(0xffff8e01)
-struct TT_SCU {
-	u_char	sys_mask;
-	u_char	char_dummy1;
-	u_char	sys_stat;
-	u_char	char_dummy2;
-	u_char	softint;
-	u_char	char_dummy3;
-	u_char	vmeint;
-	u_char	char_dummy4;
-	u_char	gp_reg1;
-	u_char	char_dummy5;
-	u_char	gp_reg2;
-	u_char	char_dummy6;
-	u_char	vme_mask;
-	u_char	char_dummy7;
-	u_char	vme_stat;
-};
-#define	tt_scu	((*(volatile struct TT_SCU *)TT_SCU_BAS))
-
-/* TT real time clock */
-
-#define	TT_RTC_BAS	(0xffff8961)
-struct TT_RTC {
-	u_char	regsel;
-	u_char	dummy;
-	u_char	data;
-};
-#define	tt_rtc	((*(volatile struct TT_RTC *)TT_RTC_BAS))
-
-
-/*
-** ACIA 6850
- */
-/* constants for the ACIA registers */
-
-/* baudrate selection and reset (Baudrate = clock/factor) */
-#define ACIA_DIV1  0
-#define ACIA_DIV16 1
-#define ACIA_DIV64 2
-#define ACIA_RESET 3
-
-/* character format */
-#define ACIA_D7E2S (0<<2)	/* 7 data, even parity, 2 stop */
-#define ACIA_D7O2S (1<<2)	/* 7 data, odd parity, 2 stop */
-#define ACIA_D7E1S (2<<2)	/* 7 data, even parity, 1 stop */
-#define ACIA_D7O1S (3<<2)	/* 7 data, odd parity, 1 stop */
-#define ACIA_D8N2S (4<<2)	/* 8 data, no parity, 2 stop */
-#define ACIA_D8N1S (5<<2)	/* 8 data, no parity, 1 stop */
-#define ACIA_D8E1S (6<<2)	/* 8 data, even parity, 1 stop */
-#define ACIA_D8O1S (7<<2)	/* 8 data, odd parity, 1 stop */
-
-/* transmit control */
-#define ACIA_RLTID (0<<5)	/* RTS low, TxINT disabled */
-#define ACIA_RLTIE (1<<5)	/* RTS low, TxINT enabled */
-#define ACIA_RHTID (2<<5)	/* RTS high, TxINT disabled */
-#define ACIA_RLTIDSB (3<<5)	/* RTS low, TxINT disabled, send break */
-
-/* receive control */
-#define ACIA_RID (0<<7)		/* RxINT disabled */
-#define ACIA_RIE (1<<7)		/* RxINT enabled */
-
-/* status fields of the ACIA */
-#define ACIA_RDRF 1		/* Receive Data Register Full */
-#define ACIA_TDRE (1<<1)	/* Transmit Data Register Empty */
-#define ACIA_DCD  (1<<2)	/* Data Carrier Detect */
-#define ACIA_CTS  (1<<3)	/* Clear To Send */
-#define ACIA_FE   (1<<4)	/* Framing Error */
-#define ACIA_OVRN (1<<5)	/* Receiver Overrun */
-#define ACIA_PE   (1<<6)	/* Parity Error */
-#define ACIA_IRQ  (1<<7)	/* Interrupt Request */
-
-#define ACIA_BAS (0xfffffc00)
-struct ACIA
- {
-  u_char key_ctrl;
-  u_char char_dummy1;
-  u_char key_data;
-  u_char char_dummy2;
-  u_char mid_ctrl;
-  u_char char_dummy3;
-  u_char mid_data;
- };
-# define acia ((*(volatile struct ACIA*)ACIA_BAS))
-
-#define	TT_DMASND_BAS (0xffff8900)
-struct TT_DMASND {
-	u_char	int_ctrl;	/* Falcon: Interrupt control */
-	u_char	ctrl;
-	u_char	pad2;
-	u_char	bas_hi;
-	u_char	pad3;
-	u_char	bas_mid;
-	u_char	pad4;
-	u_char	bas_low;
-	u_char	pad5;
-	u_char	addr_hi;
-	u_char	pad6;
-	u_char	addr_mid;
-	u_char	pad7;
-	u_char	addr_low;
-	u_char	pad8;
-	u_char	end_hi;
-	u_char	pad9;
-	u_char	end_mid;
-	u_char	pad10;
-	u_char	end_low;
-	u_char	pad11[12];
-	u_char	track_select;	/* Falcon */
-	u_char	mode;
-	u_char	pad12[14];
-	/* Falcon only: */
-	u_short	cbar_src;
-	u_short cbar_dst;
-	u_char	ext_div;
-	u_char	int_div;
-	u_char	rec_track_select;
-	u_char	dac_src;
-	u_char	adc_src;
-	u_char	input_gain;
-	u_short	output_atten;
-};
-# define tt_dmasnd ((*(volatile struct TT_DMASND *)TT_DMASND_BAS))
-
-#define DMASND_MFP_INT_REPLAY     0x01
-#define DMASND_MFP_INT_RECORD     0x02
-#define DMASND_TIMERA_INT_REPLAY  0x04
-#define DMASND_TIMERA_INT_RECORD  0x08
-
-#define	DMASND_CTRL_OFF		  0x00
-#define	DMASND_CTRL_ON		  0x01
-#define	DMASND_CTRL_REPEAT	  0x02
-#define DMASND_CTRL_RECORD_ON     0x10
-#define DMASND_CTRL_RECORD_OFF    0x00
-#define DMASND_CTRL_RECORD_REPEAT 0x20
-#define DMASND_CTRL_SELECT_REPLAY 0x00
-#define DMASND_CTRL_SELECT_RECORD 0x80
-#define	DMASND_MODE_MONO	  0x80
-#define	DMASND_MODE_STEREO	  0x00
-#define DMASND_MODE_8BIT	  0x00
-#define DMASND_MODE_16BIT	  0x40	/* Falcon only */
-#define	DMASND_MODE_6KHZ	  0x00	/* Falcon: mute */
-#define	DMASND_MODE_12KHZ	  0x01
-#define	DMASND_MODE_25KHZ	  0x02
-#define	DMASND_MODE_50KHZ	  0x03
-
-
-#define DMASNDSetBase(bufstart)						\
-    do {								\
-	tt_dmasnd.bas_hi  = (unsigned char)(((bufstart) & 0xff0000) >> 16); \
-	tt_dmasnd.bas_mid = (unsigned char)(((bufstart) & 0x00ff00) >> 8); \
-	tt_dmasnd.bas_low = (unsigned char) ((bufstart) & 0x0000ff); \
-    } while( 0 )
-
-#define DMASNDGetAdr() ((tt_dmasnd.addr_hi << 16) +	\
-			(tt_dmasnd.addr_mid << 8) +	\
-			(tt_dmasnd.addr_low))
-
-#define DMASNDSetEnd(bufend)				\
-    do {						\
-	tt_dmasnd.end_hi  = (unsigned char)(((bufend) & 0xff0000) >> 16); \
-	tt_dmasnd.end_mid = (unsigned char)(((bufend) & 0x00ff00) >> 8); \
-	tt_dmasnd.end_low = (unsigned char) ((bufend) & 0x0000ff); \
-    } while( 0 )
-
-
-#define	TT_MICROWIRE_BAS	(0xffff8922)
-struct TT_MICROWIRE {
-	u_short	data;
-	u_short	mask;
-};
-# define tt_microwire ((*(volatile struct TT_MICROWIRE *)TT_MICROWIRE_BAS))
-
-#define	MW_LM1992_ADDR		0x0400
-
-#define	MW_LM1992_VOLUME(dB)	\
-    (0x0c0 | ((dB) < -80 ? 0 : (dB) > 0 ? 40 : (((dB) + 80) / 2)))
-#define	MW_LM1992_BALLEFT(dB)	\
-    (0x140 | ((dB) < -40 ? 0 : (dB) > 0 ? 20 : (((dB) + 40) / 2)))
-#define	MW_LM1992_BALRIGHT(dB)	\
-    (0x100 | ((dB) < -40 ? 0 : (dB) > 0 ? 20 : (((dB) + 40) / 2)))
-#define	MW_LM1992_TREBLE(dB)	\
-    (0x080 | ((dB) < -12 ? 0 : (dB) > 12 ? 12 : (((dB) / 2) + 6)))
-#define	MW_LM1992_BASS(dB)	\
-    (0x040 | ((dB) < -12 ? 0 : (dB) > 12 ? 12 : (((dB) / 2) + 6)))
-
-#define	MW_LM1992_PSG_LOW	0x000
-#define	MW_LM1992_PSG_HIGH	0x001
-#define	MW_LM1992_PSG_OFF	0x002
-
-#define MSTE_RTC_BAS	(0xfffffc21)
-
-struct MSTE_RTC {
-	u_char sec_ones;
-	u_char dummy1;
-	u_char sec_tens;
-	u_char dummy2;
-	u_char min_ones;
-	u_char dummy3;
-	u_char min_tens;
-	u_char dummy4;
-	u_char hr_ones;
-	u_char dummy5;
-	u_char hr_tens;
-	u_char dummy6;
-	u_char weekday;
-	u_char dummy7;
-	u_char day_ones;
-	u_char dummy8;
-	u_char day_tens;
-	u_char dummy9;
-	u_char mon_ones;
-	u_char dummy10;
-	u_char mon_tens;
-	u_char dummy11;
-	u_char year_ones;
-	u_char dummy12;
-	u_char year_tens;
-	u_char dummy13;
-	u_char mode;
-	u_char dummy14;
-	u_char test;
-	u_char dummy15;
-	u_char reset;
-};
-
-#define mste_rtc ((*(volatile struct MSTE_RTC *)MSTE_RTC_BAS))
-
-#endif /* linux/atarihw.h */
-
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/atariints.h b/ANDROID_3.4.5/arch/m68k/include/asm/atariints.h
deleted file mode 100644
index 656bbbf5..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/atariints.h
+++ /dev/null
@@ -1,204 +0,0 @@
-/*
-** atariints.h -- Atari Linux interrupt handling structs and prototypes
-**
-** Copyright 1994 by Björn Brauel
-**
-** 5/2/94 Roman Hodek:
-**   TT interrupt definitions added.
-**
-** 12/02/96: (Roman)
-**   Adapted to new int handling scheme (see ataints.c); revised numbering
-**
-** This file is subject to the terms and conditions of the GNU General Public
-** License.  See the file COPYING in the main directory of this archive
-** for more details.
-**
-*/
-
-#ifndef _LINUX_ATARIINTS_H_
-#define _LINUX_ATARIINTS_H_
-
-#include <asm/irq.h>
-#include <asm/atarihw.h>
-
-/*
-** Atari Interrupt sources.
-**
-*/
-
-#define STMFP_SOURCE_BASE  8
-#define TTMFP_SOURCE_BASE  24
-#define SCC_SOURCE_BASE    40
-#define VME_SOURCE_BASE    56
-#define VME_MAX_SOURCES    16
-
-#define NUM_ATARI_SOURCES   (VME_SOURCE_BASE+VME_MAX_SOURCES-STMFP_SOURCE_BASE)
-
-/* convert vector number to int source number */
-#define IRQ_VECTOR_TO_SOURCE(v)	((v) - ((v) < 0x20 ? 0x18 : (0x40-8)))
-
-/* convert irq_handler index to vector number */
-#define IRQ_SOURCE_TO_VECTOR(i)	((i) + ((i) < 8 ? 0x18 : (0x40-8)))
-
-/* interrupt service types */
-#define IRQ_TYPE_SLOW     0
-#define IRQ_TYPE_FAST     1
-#define IRQ_TYPE_PRIO     2
-
-/* ST-MFP interrupts */
-#define IRQ_MFP_BUSY      (8)
-#define IRQ_MFP_DCD       (9)
-#define IRQ_MFP_CTS	  (10)
-#define IRQ_MFP_GPU	  (11)
-#define IRQ_MFP_TIMD      (12)
-#define IRQ_MFP_TIMC	  (13)
-#define IRQ_MFP_ACIA	  (14)
-#define IRQ_MFP_FDC       (15)
-#define IRQ_MFP_ACSI      IRQ_MFP_FDC
-#define IRQ_MFP_FSCSI     IRQ_MFP_FDC
-#define IRQ_MFP_IDE       IRQ_MFP_FDC
-#define IRQ_MFP_TIMB      (16)
-#define IRQ_MFP_SERERR    (17)
-#define IRQ_MFP_SEREMPT   (18)
-#define IRQ_MFP_RECERR    (19)
-#define IRQ_MFP_RECFULL   (20)
-#define IRQ_MFP_TIMA      (21)
-#define IRQ_MFP_RI        (22)
-#define IRQ_MFP_MMD       (23)
-
-/* TT-MFP interrupts */
-#define IRQ_TT_MFP_IO0       (24)
-#define IRQ_TT_MFP_IO1       (25)
-#define IRQ_TT_MFP_SCC	     (26)
-#define IRQ_TT_MFP_RI	     (27)
-#define IRQ_TT_MFP_TIMD      (28)
-#define IRQ_TT_MFP_TIMC	     (29)
-#define IRQ_TT_MFP_DRVRDY    (30)
-#define IRQ_TT_MFP_SCSIDMA   (31)
-#define IRQ_TT_MFP_TIMB      (32)
-#define IRQ_TT_MFP_SERERR    (33)
-#define IRQ_TT_MFP_SEREMPT   (34)
-#define IRQ_TT_MFP_RECERR    (35)
-#define IRQ_TT_MFP_RECFULL   (36)
-#define IRQ_TT_MFP_TIMA      (37)
-#define IRQ_TT_MFP_RTC       (38)
-#define IRQ_TT_MFP_SCSI      (39)
-
-/* SCC interrupts */
-#define IRQ_SCCB_TX	     (40)
-#define IRQ_SCCB_STAT	     (42)
-#define IRQ_SCCB_RX	     (44)
-#define IRQ_SCCB_SPCOND	     (46)
-#define IRQ_SCCA_TX	     (48)
-#define IRQ_SCCA_STAT	     (50)
-#define IRQ_SCCA_RX	     (52)
-#define IRQ_SCCA_SPCOND	     (54)
-
-
-#define INT_CLK   24576	    /* CLK while int_clk =2.456MHz and divide = 100 */
-#define INT_TICKS 246	    /* to make sched_time = 99.902... HZ */
-
-
-#define MFP_ENABLE	0
-#define MFP_PENDING	1
-#define MFP_SERVICE	2
-#define MFP_MASK	3
-
-/* Utility functions for setting/clearing bits in the interrupt registers of
- * the MFP. 'type' should be constant, if 'irq' is constant, too, code size is
- * reduced. set_mfp_bit() is nonsense for PENDING and SERVICE registers. */
-
-static inline int get_mfp_bit( unsigned irq, int type )
-
-{	unsigned char	mask, *reg;
-
-	mask = 1 << (irq & 7);
-	reg = (unsigned char *)&st_mfp.int_en_a + type*4 +
-		  ((irq & 8) >> 2) + (((irq-8) & 16) << 3);
-	return( *reg & mask );
-}
-
-static inline void set_mfp_bit( unsigned irq, int type )
-
-{	unsigned char	mask, *reg;
-
-	mask = 1 << (irq & 7);
-	reg = (unsigned char *)&st_mfp.int_en_a + type*4 +
-		  ((irq & 8) >> 2) + (((irq-8) & 16) << 3);
-	__asm__ __volatile__ ( "orb %0,%1"
-			      : : "di" (mask), "m" (*reg) : "memory" );
-}
-
-static inline void clear_mfp_bit( unsigned irq, int type )
-
-{	unsigned char	mask, *reg;
-
-	mask = ~(1 << (irq & 7));
-	reg = (unsigned char *)&st_mfp.int_en_a + type*4 +
-		  ((irq & 8) >> 2) + (((irq-8) & 16) << 3);
-	if (type == MFP_PENDING || type == MFP_SERVICE)
-		__asm__ __volatile__ ( "moveb %0,%1"
-				      : : "di" (mask), "m" (*reg) : "memory" );
-	else
-		__asm__ __volatile__ ( "andb %0,%1"
-				      : : "di" (mask), "m" (*reg) : "memory" );
-}
-
-/*
- * {en,dis}able_irq have the usual semantics of temporary blocking the
- * interrupt, but not losing requests that happen between disabling and
- * enabling. This is done with the MFP mask registers.
- */
-
-static inline void atari_enable_irq( unsigned irq )
-
-{
-	if (irq < STMFP_SOURCE_BASE || irq >= SCC_SOURCE_BASE) return;
-	set_mfp_bit( irq, MFP_MASK );
-}
-
-static inline void atari_disable_irq( unsigned irq )
-
-{
-	if (irq < STMFP_SOURCE_BASE || irq >= SCC_SOURCE_BASE) return;
-	clear_mfp_bit( irq, MFP_MASK );
-}
-
-/*
- * In opposite to {en,dis}able_irq, requests between turn{off,on}_irq are not
- * "stored"
- */
-
-static inline void atari_turnon_irq( unsigned irq )
-
-{
-	if (irq < STMFP_SOURCE_BASE || irq >= SCC_SOURCE_BASE) return;
-	set_mfp_bit( irq, MFP_ENABLE );
-}
-
-static inline void atari_turnoff_irq( unsigned irq )
-
-{
-	if (irq < STMFP_SOURCE_BASE || irq >= SCC_SOURCE_BASE) return;
-	clear_mfp_bit( irq, MFP_ENABLE );
-	clear_mfp_bit( irq, MFP_PENDING );
-}
-
-static inline void atari_clear_pending_irq( unsigned irq )
-
-{
-	if (irq < STMFP_SOURCE_BASE || irq >= SCC_SOURCE_BASE) return;
-	clear_mfp_bit( irq, MFP_PENDING );
-}
-
-static inline int atari_irq_pending( unsigned irq )
-
-{
-	if (irq < STMFP_SOURCE_BASE || irq >= SCC_SOURCE_BASE) return( 0 );
-	return( get_mfp_bit( irq, MFP_PENDING ) );
-}
-
-unsigned long atari_register_vme_int( void );
-void atari_unregister_vme_int( unsigned long );
-
-#endif /* linux/atariints.h */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/atarikb.h b/ANDROID_3.4.5/arch/m68k/include/asm/atarikb.h
deleted file mode 100644
index 68f3622b..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/atarikb.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
-** atarikb.h -- This header contains the prototypes of functions of
-**              the intelligent keyboard of the Atari needed by the
-**              mouse and joystick drivers.
-**
-** Copyright 1994 by Robert de Vries
-**
-** This file is subject to the terms and conditions of the GNU General Public
-** License.  See the file COPYING in the main directory of this archive
-** for more details.
-**
-** Created: 20 Feb 1994 by Robert de Vries
-*/
-
-#ifndef _LINUX_ATARIKB_H
-#define _LINUX_ATARIKB_H
-
-void ikbd_write(const char *, int);
-void ikbd_mouse_button_action(int mode);
-void ikbd_mouse_rel_pos(void);
-void ikbd_mouse_abs_pos(int xmax, int ymax);
-void ikbd_mouse_kbd_mode(int dx, int dy);
-void ikbd_mouse_thresh(int x, int y);
-void ikbd_mouse_scale(int x, int y);
-void ikbd_mouse_pos_get(int *x, int *y);
-void ikbd_mouse_pos_set(int x, int y);
-void ikbd_mouse_y0_bot(void);
-void ikbd_mouse_y0_top(void);
-void ikbd_mouse_disable(void);
-void ikbd_joystick_event_on(void);
-void ikbd_joystick_event_off(void);
-void ikbd_joystick_get_state(void);
-void ikbd_joystick_disable(void);
-
-/* Hook for MIDI serial driver */
-extern void (*atari_MIDI_interrupt_hook) (void);
-/* Hook for keyboard inputdev  driver */
-extern void (*atari_input_keyboard_interrupt_hook) (unsigned char, char);
-/* Hook for mouse inputdev  driver */
-extern void (*atari_input_mouse_interrupt_hook) (char *);
-
-int atari_keyb_init(void);
-
-#endif /* _LINUX_ATARIKB_H */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/atomic.h b/ANDROID_3.4.5/arch/m68k/include/asm/atomic.h
deleted file mode 100644
index f4e32de2..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/atomic.h
+++ /dev/null
@@ -1,219 +0,0 @@
-#ifndef __ARCH_M68K_ATOMIC__
-#define __ARCH_M68K_ATOMIC__
-
-#include <linux/types.h>
-#include <linux/irqflags.h>
-#include <asm/cmpxchg.h>
-
-/*
- * Atomic operations that C can't guarantee us.  Useful for
- * resource counting etc..
- */
-
-/*
- * We do not have SMP m68k systems, so we don't have to deal with that.
- */
-
-#define ATOMIC_INIT(i)	{ (i) }
-
-#define atomic_read(v)		(*(volatile int *)&(v)->counter)
-#define atomic_set(v, i)	(((v)->counter) = i)
-
-/*
- * The ColdFire parts cannot do some immediate to memory operations,
- * so for them we do not specify the "i" asm constraint.
- */
-#ifdef CONFIG_COLDFIRE
-#define	ASM_DI	"d"
-#else
-#define	ASM_DI	"di"
-#endif
-
-static inline void atomic_add(int i, atomic_t *v)
-{
-	__asm__ __volatile__("addl %1,%0" : "+m" (*v) : ASM_DI (i));
-}
-
-static inline void atomic_sub(int i, atomic_t *v)
-{
-	__asm__ __volatile__("subl %1,%0" : "+m" (*v) : ASM_DI (i));
-}
-
-static inline void atomic_inc(atomic_t *v)
-{
-	__asm__ __volatile__("addql #1,%0" : "+m" (*v));
-}
-
-static inline void atomic_dec(atomic_t *v)
-{
-	__asm__ __volatile__("subql #1,%0" : "+m" (*v));
-}
-
-static inline int atomic_dec_and_test(atomic_t *v)
-{
-	char c;
-	__asm__ __volatile__("subql #1,%1; seq %0" : "=d" (c), "+m" (*v));
-	return c != 0;
-}
-
-static inline int atomic_dec_and_test_lt(atomic_t *v)
-{
-	char c;
-	__asm__ __volatile__(
-		"subql #1,%1; slt %0"
-		: "=d" (c), "=m" (*v)
-		: "m" (*v));
-	return c != 0;
-}
-
-static inline int atomic_inc_and_test(atomic_t *v)
-{
-	char c;
-	__asm__ __volatile__("addql #1,%1; seq %0" : "=d" (c), "+m" (*v));
-	return c != 0;
-}
-
-#ifdef CONFIG_RMW_INSNS
-
-static inline int atomic_add_return(int i, atomic_t *v)
-{
-	int t, tmp;
-
-	__asm__ __volatile__(
-			"1:	movel %2,%1\n"
-			"	addl %3,%1\n"
-			"	casl %2,%1,%0\n"
-			"	jne 1b"
-			: "+m" (*v), "=&d" (t), "=&d" (tmp)
-			: "g" (i), "2" (atomic_read(v)));
-	return t;
-}
-
-static inline int atomic_sub_return(int i, atomic_t *v)
-{
-	int t, tmp;
-
-	__asm__ __volatile__(
-			"1:	movel %2,%1\n"
-			"	subl %3,%1\n"
-			"	casl %2,%1,%0\n"
-			"	jne 1b"
-			: "+m" (*v), "=&d" (t), "=&d" (tmp)
-			: "g" (i), "2" (atomic_read(v)));
-	return t;
-}
-
-#define atomic_cmpxchg(v, o, n) ((int)cmpxchg(&((v)->counter), (o), (n)))
-#define atomic_xchg(v, new) (xchg(&((v)->counter), new))
-
-#else /* !CONFIG_RMW_INSNS */
-
-static inline int atomic_add_return(int i, atomic_t * v)
-{
-	unsigned long flags;
-	int t;
-
-	local_irq_save(flags);
-	t = atomic_read(v);
-	t += i;
-	atomic_set(v, t);
-	local_irq_restore(flags);
-
-	return t;
-}
-
-static inline int atomic_sub_return(int i, atomic_t * v)
-{
-	unsigned long flags;
-	int t;
-
-	local_irq_save(flags);
-	t = atomic_read(v);
-	t -= i;
-	atomic_set(v, t);
-	local_irq_restore(flags);
-
-	return t;
-}
-
-static inline int atomic_cmpxchg(atomic_t *v, int old, int new)
-{
-	unsigned long flags;
-	int prev;
-
-	local_irq_save(flags);
-	prev = atomic_read(v);
-	if (prev == old)
-		atomic_set(v, new);
-	local_irq_restore(flags);
-	return prev;
-}
-
-static inline int atomic_xchg(atomic_t *v, int new)
-{
-	unsigned long flags;
-	int prev;
-
-	local_irq_save(flags);
-	prev = atomic_read(v);
-	atomic_set(v, new);
-	local_irq_restore(flags);
-	return prev;
-}
-
-#endif /* !CONFIG_RMW_INSNS */
-
-#define atomic_dec_return(v)	atomic_sub_return(1, (v))
-#define atomic_inc_return(v)	atomic_add_return(1, (v))
-
-static inline int atomic_sub_and_test(int i, atomic_t *v)
-{
-	char c;
-	__asm__ __volatile__("subl %2,%1; seq %0"
-			     : "=d" (c), "+m" (*v)
-			     : ASM_DI (i));
-	return c != 0;
-}
-
-static inline int atomic_add_negative(int i, atomic_t *v)
-{
-	char c;
-	__asm__ __volatile__("addl %2,%1; smi %0"
-			     : "=d" (c), "+m" (*v)
-			     : ASM_DI (i));
-	return c != 0;
-}
-
-static inline void atomic_clear_mask(unsigned long mask, unsigned long *v)
-{
-	__asm__ __volatile__("andl %1,%0" : "+m" (*v) : ASM_DI (~(mask)));
-}
-
-static inline void atomic_set_mask(unsigned long mask, unsigned long *v)
-{
-	__asm__ __volatile__("orl %1,%0" : "+m" (*v) : ASM_DI (mask));
-}
-
-static __inline__ int __atomic_add_unless(atomic_t *v, int a, int u)
-{
-	int c, old;
-	c = atomic_read(v);
-	for (;;) {
-		if (unlikely(c == (u)))
-			break;
-		old = atomic_cmpxchg((v), c, c + (a));
-		if (likely(old == c))
-			break;
-		c = old;
-	}
-	return c;
-}
-
-
-/* Atomic operations are already serializing */
-#define smp_mb__before_atomic_dec()	barrier()
-#define smp_mb__after_atomic_dec()	barrier()
-#define smp_mb__before_atomic_inc()	barrier()
-#define smp_mb__after_atomic_inc()	barrier()
-
-#endif /* __ARCH_M68K_ATOMIC __ */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/auxvec.h b/ANDROID_3.4.5/arch/m68k/include/asm/auxvec.h
deleted file mode 100644
index 844d6d52..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/auxvec.h
+++ /dev/null
@@ -1,4 +0,0 @@
-#ifndef __ASMm68k_AUXVEC_H
-#define __ASMm68k_AUXVEC_H
-
-#endif
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/barrier.h b/ANDROID_3.4.5/arch/m68k/include/asm/barrier.h
deleted file mode 100644
index 445ce22c..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/barrier.h
+++ /dev/null
@@ -1,20 +0,0 @@
-#ifndef _M68K_BARRIER_H
-#define _M68K_BARRIER_H
-
-/*
- * Force strict CPU ordering.
- * Not really required on m68k...
- */
-#define nop()		do { asm volatile ("nop"); barrier(); } while (0)
-#define mb()		barrier()
-#define rmb()		barrier()
-#define wmb()		barrier()
-#define read_barrier_depends()	((void)0)
-#define set_mb(var, value)	({ (var) = (value); wmb(); })
-
-#define smp_mb()	barrier()
-#define smp_rmb()	barrier()
-#define smp_wmb()	barrier()
-#define smp_read_barrier_depends()	((void)0)
-
-#endif /* _M68K_BARRIER_H */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/bitops.h b/ANDROID_3.4.5/arch/m68k/include/asm/bitops.h
deleted file mode 100644
index c6baa913..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/bitops.h
+++ /dev/null
@@ -1,530 +0,0 @@
-#ifndef _M68K_BITOPS_H
-#define _M68K_BITOPS_H
-/*
- * Copyright 1992, Linus Torvalds.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file COPYING in the main directory of this archive
- * for more details.
- */
-
-#ifndef _LINUX_BITOPS_H
-#error only <linux/bitops.h> can be included directly
-#endif
-
-#include <linux/compiler.h>
-
-/*
- *	Bit access functions vary across the ColdFire and 68k families.
- *	So we will break them out here, and then macro in the ones we want.
- *
- *	ColdFire - supports standard bset/bclr/bchg with register operand only
- *	68000    - supports standard bset/bclr/bchg with memory operand
- *	>= 68020 - also supports the bfset/bfclr/bfchg instructions
- *
- *	Although it is possible to use only the bset/bclr/bchg with register
- *	operands on all platforms you end up with larger generated code.
- *	So we use the best form possible on a given platform.
- */
-
-static inline void bset_reg_set_bit(int nr, volatile unsigned long *vaddr)
-{
-	char *p = (char *)vaddr + (nr ^ 31) / 8;
-
-	__asm__ __volatile__ ("bset %1,(%0)"
-		:
-		: "a" (p), "di" (nr & 7)
-		: "memory");
-}
-
-static inline void bset_mem_set_bit(int nr, volatile unsigned long *vaddr)
-{
-	char *p = (char *)vaddr + (nr ^ 31) / 8;
-
-	__asm__ __volatile__ ("bset %1,%0"
-		: "+m" (*p)
-		: "di" (nr & 7));
-}
-
-static inline void bfset_mem_set_bit(int nr, volatile unsigned long *vaddr)
-{
-	__asm__ __volatile__ ("bfset %1{%0:#1}"
-		:
-		: "d" (nr ^ 31), "o" (*vaddr)
-		: "memory");
-}
-
-#if defined(CONFIG_COLDFIRE)
-#define	set_bit(nr, vaddr)	bset_reg_set_bit(nr, vaddr)
-#elif defined(CONFIG_CPU_HAS_NO_BITFIELDS)
-#define	set_bit(nr, vaddr)	bset_mem_set_bit(nr, vaddr)
-#else
-#define set_bit(nr, vaddr)	(__builtin_constant_p(nr) ? \
-				bset_mem_set_bit(nr, vaddr) : \
-				bfset_mem_set_bit(nr, vaddr))
-#endif
-
-#define __set_bit(nr, vaddr)	set_bit(nr, vaddr)
-
-
-/*
- * clear_bit() doesn't provide any barrier for the compiler.
- */
-#define smp_mb__before_clear_bit()	barrier()
-#define smp_mb__after_clear_bit()	barrier()
-
-static inline void bclr_reg_clear_bit(int nr, volatile unsigned long *vaddr)
-{
-	char *p = (char *)vaddr + (nr ^ 31) / 8;
-
-	__asm__ __volatile__ ("bclr %1,(%0)"
-		:
-		: "a" (p), "di" (nr & 7)
-		: "memory");
-}
-
-static inline void bclr_mem_clear_bit(int nr, volatile unsigned long *vaddr)
-{
-	char *p = (char *)vaddr + (nr ^ 31) / 8;
-
-	__asm__ __volatile__ ("bclr %1,%0"
-		: "+m" (*p)
-		: "di" (nr & 7));
-}
-
-static inline void bfclr_mem_clear_bit(int nr, volatile unsigned long *vaddr)
-{
-	__asm__ __volatile__ ("bfclr %1{%0:#1}"
-		:
-		: "d" (nr ^ 31), "o" (*vaddr)
-		: "memory");
-}
-
-#if defined(CONFIG_COLDFIRE)
-#define	clear_bit(nr, vaddr)	bclr_reg_clear_bit(nr, vaddr)
-#elif defined(CONFIG_CPU_HAS_NO_BITFIELDS)
-#define	clear_bit(nr, vaddr)	bclr_mem_clear_bit(nr, vaddr)
-#else
-#define clear_bit(nr, vaddr)	(__builtin_constant_p(nr) ? \
-				bclr_mem_clear_bit(nr, vaddr) : \
-				bfclr_mem_clear_bit(nr, vaddr))
-#endif
-
-#define __clear_bit(nr, vaddr)	clear_bit(nr, vaddr)
-
-
-static inline void bchg_reg_change_bit(int nr, volatile unsigned long *vaddr)
-{
-	char *p = (char *)vaddr + (nr ^ 31) / 8;
-
-	__asm__ __volatile__ ("bchg %1,(%0)"
-		:
-		: "a" (p), "di" (nr & 7)
-		: "memory");
-}
-
-static inline void bchg_mem_change_bit(int nr, volatile unsigned long *vaddr)
-{
-	char *p = (char *)vaddr + (nr ^ 31) / 8;
-
-	__asm__ __volatile__ ("bchg %1,%0"
-		: "+m" (*p)
-		: "di" (nr & 7));
-}
-
-static inline void bfchg_mem_change_bit(int nr, volatile unsigned long *vaddr)
-{
-	__asm__ __volatile__ ("bfchg %1{%0:#1}"
-		:
-		: "d" (nr ^ 31), "o" (*vaddr)
-		: "memory");
-}
-
-#if defined(CONFIG_COLDFIRE)
-#define	change_bit(nr, vaddr)	bchg_reg_change_bit(nr, vaddr)
-#elif defined(CONFIG_CPU_HAS_NO_BITFIELDS)
-#define	change_bit(nr, vaddr)	bchg_mem_change_bit(nr, vaddr)
-#else
-#define change_bit(nr, vaddr)	(__builtin_constant_p(nr) ? \
-				bchg_mem_change_bit(nr, vaddr) : \
-				bfchg_mem_change_bit(nr, vaddr))
-#endif
-
-#define __change_bit(nr, vaddr)	change_bit(nr, vaddr)
-
-
-static inline int test_bit(int nr, const unsigned long *vaddr)
-{
-	return (vaddr[nr >> 5] & (1UL << (nr & 31))) != 0;
-}
-
-
-static inline int bset_reg_test_and_set_bit(int nr,
-					    volatile unsigned long *vaddr)
-{
-	char *p = (char *)vaddr + (nr ^ 31) / 8;
-	char retval;
-
-	__asm__ __volatile__ ("bset %2,(%1); sne %0"
-		: "=d" (retval)
-		: "a" (p), "di" (nr & 7)
-		: "memory");
-	return retval;
-}
-
-static inline int bset_mem_test_and_set_bit(int nr,
-					    volatile unsigned long *vaddr)
-{
-	char *p = (char *)vaddr + (nr ^ 31) / 8;
-	char retval;
-
-	__asm__ __volatile__ ("bset %2,%1; sne %0"
-		: "=d" (retval), "+m" (*p)
-		: "di" (nr & 7));
-	return retval;
-}
-
-static inline int bfset_mem_test_and_set_bit(int nr,
-					     volatile unsigned long *vaddr)
-{
-	char retval;
-
-	__asm__ __volatile__ ("bfset %2{%1:#1}; sne %0"
-		: "=d" (retval)
-		: "d" (nr ^ 31), "o" (*vaddr)
-		: "memory");
-	return retval;
-}
-
-#if defined(CONFIG_COLDFIRE)
-#define	test_and_set_bit(nr, vaddr)	bset_reg_test_and_set_bit(nr, vaddr)
-#elif defined(CONFIG_CPU_HAS_NO_BITFIELDS)
-#define	test_and_set_bit(nr, vaddr)	bset_mem_test_and_set_bit(nr, vaddr)
-#else
-#define test_and_set_bit(nr, vaddr)	(__builtin_constant_p(nr) ? \
-					bset_mem_test_and_set_bit(nr, vaddr) : \
-					bfset_mem_test_and_set_bit(nr, vaddr))
-#endif
-
-#define __test_and_set_bit(nr, vaddr)	test_and_set_bit(nr, vaddr)
-
-
-static inline int bclr_reg_test_and_clear_bit(int nr,
-					      volatile unsigned long *vaddr)
-{
-	char *p = (char *)vaddr + (nr ^ 31) / 8;
-	char retval;
-
-	__asm__ __volatile__ ("bclr %2,(%1); sne %0"
-		: "=d" (retval)
-		: "a" (p), "di" (nr & 7)
-		: "memory");
-	return retval;
-}
-
-static inline int bclr_mem_test_and_clear_bit(int nr,
-					      volatile unsigned long *vaddr)
-{
-	char *p = (char *)vaddr + (nr ^ 31) / 8;
-	char retval;
-
-	__asm__ __volatile__ ("bclr %2,%1; sne %0"
-		: "=d" (retval), "+m" (*p)
-		: "di" (nr & 7));
-	return retval;
-}
-
-static inline int bfclr_mem_test_and_clear_bit(int nr,
-					       volatile unsigned long *vaddr)
-{
-	char retval;
-
-	__asm__ __volatile__ ("bfclr %2{%1:#1}; sne %0"
-		: "=d" (retval)
-		: "d" (nr ^ 31), "o" (*vaddr)
-		: "memory");
-	return retval;
-}
-
-#if defined(CONFIG_COLDFIRE)
-#define	test_and_clear_bit(nr, vaddr)	bclr_reg_test_and_clear_bit(nr, vaddr)
-#elif defined(CONFIG_CPU_HAS_NO_BITFIELDS)
-#define	test_and_clear_bit(nr, vaddr)	bclr_mem_test_and_clear_bit(nr, vaddr)
-#else
-#define test_and_clear_bit(nr, vaddr)	(__builtin_constant_p(nr) ? \
-					bclr_mem_test_and_clear_bit(nr, vaddr) : \
-					bfclr_mem_test_and_clear_bit(nr, vaddr))
-#endif
-
-#define __test_and_clear_bit(nr, vaddr)	test_and_clear_bit(nr, vaddr)
-
-
-static inline int bchg_reg_test_and_change_bit(int nr,
-					       volatile unsigned long *vaddr)
-{
-	char *p = (char *)vaddr + (nr ^ 31) / 8;
-	char retval;
-
-	__asm__ __volatile__ ("bchg %2,(%1); sne %0"
-		: "=d" (retval)
-		: "a" (p), "di" (nr & 7)
-		: "memory");
-	return retval;
-}
-
-static inline int bchg_mem_test_and_change_bit(int nr,
-					       volatile unsigned long *vaddr)
-{
-	char *p = (char *)vaddr + (nr ^ 31) / 8;
-	char retval;
-
-	__asm__ __volatile__ ("bchg %2,%1; sne %0"
-		: "=d" (retval), "+m" (*p)
-		: "di" (nr & 7));
-	return retval;
-}
-
-static inline int bfchg_mem_test_and_change_bit(int nr,
-						volatile unsigned long *vaddr)
-{
-	char retval;
-
-	__asm__ __volatile__ ("bfchg %2{%1:#1}; sne %0"
-		: "=d" (retval)
-		: "d" (nr ^ 31), "o" (*vaddr)
-		: "memory");
-	return retval;
-}
-
-#if defined(CONFIG_COLDFIRE)
-#define	test_and_change_bit(nr, vaddr)	bchg_reg_test_and_change_bit(nr, vaddr)
-#elif defined(CONFIG_CPU_HAS_NO_BITFIELDS)
-#define	test_and_change_bit(nr, vaddr)	bchg_mem_test_and_change_bit(nr, vaddr)
-#else
-#define test_and_change_bit(nr, vaddr)	(__builtin_constant_p(nr) ? \
-					bchg_mem_test_and_change_bit(nr, vaddr) : \
-					bfchg_mem_test_and_change_bit(nr, vaddr))
-#endif
-
-#define __test_and_change_bit(nr, vaddr) test_and_change_bit(nr, vaddr)
-
-
-/*
- *	The true 68020 and more advanced processors support the "bfffo"
- *	instruction for finding bits. ColdFire and simple 68000 parts
- *	(including CPU32) do not support this. They simply use the generic
- *	functions.
- */
-#if defined(CONFIG_CPU_HAS_NO_BITFIELDS)
-#include <asm-generic/bitops/find.h>
-#include <asm-generic/bitops/ffz.h>
-#else
-
-static inline int find_first_zero_bit(const unsigned long *vaddr,
-				      unsigned size)
-{
-	const unsigned long *p = vaddr;
-	int res = 32;
-	unsigned int words;
-	unsigned long num;
-
-	if (!size)
-		return 0;
-
-	words = (size + 31) >> 5;
-	while (!(num = ~*p++)) {
-		if (!--words)
-			goto out;
-	}
-
-	__asm__ __volatile__ ("bfffo %1{#0,#0},%0"
-			      : "=d" (res) : "d" (num & -num));
-	res ^= 31;
-out:
-	res += ((long)p - (long)vaddr - 4) * 8;
-	return res < size ? res : size;
-}
-#define find_first_zero_bit find_first_zero_bit
-
-static inline int find_next_zero_bit(const unsigned long *vaddr, int size,
-				     int offset)
-{
-	const unsigned long *p = vaddr + (offset >> 5);
-	int bit = offset & 31UL, res;
-
-	if (offset >= size)
-		return size;
-
-	if (bit) {
-		unsigned long num = ~*p++ & (~0UL << bit);
-		offset -= bit;
-
-		/* Look for zero in first longword */
-		__asm__ __volatile__ ("bfffo %1{#0,#0},%0"
-				      : "=d" (res) : "d" (num & -num));
-		if (res < 32) {
-			offset += res ^ 31;
-			return offset < size ? offset : size;
-		}
-		offset += 32;
-
-		if (offset >= size)
-			return size;
-	}
-	/* No zero yet, search remaining full bytes for a zero */
-	return offset + find_first_zero_bit(p, size - offset);
-}
-#define find_next_zero_bit find_next_zero_bit
-
-static inline int find_first_bit(const unsigned long *vaddr, unsigned size)
-{
-	const unsigned long *p = vaddr;
-	int res = 32;
-	unsigned int words;
-	unsigned long num;
-
-	if (!size)
-		return 0;
-
-	words = (size + 31) >> 5;
-	while (!(num = *p++)) {
-		if (!--words)
-			goto out;
-	}
-
-	__asm__ __volatile__ ("bfffo %1{#0,#0},%0"
-			      : "=d" (res) : "d" (num & -num));
-	res ^= 31;
-out:
-	res += ((long)p - (long)vaddr - 4) * 8;
-	return res < size ? res : size;
-}
-#define find_first_bit find_first_bit
-
-static inline int find_next_bit(const unsigned long *vaddr, int size,
-				int offset)
-{
-	const unsigned long *p = vaddr + (offset >> 5);
-	int bit = offset & 31UL, res;
-
-	if (offset >= size)
-		return size;
-
-	if (bit) {
-		unsigned long num = *p++ & (~0UL << bit);
-		offset -= bit;
-
-		/* Look for one in first longword */
-		__asm__ __volatile__ ("bfffo %1{#0,#0},%0"
-				      : "=d" (res) : "d" (num & -num));
-		if (res < 32) {
-			offset += res ^ 31;
-			return offset < size ? offset : size;
-		}
-		offset += 32;
-
-		if (offset >= size)
-			return size;
-	}
-	/* No one yet, search remaining full bytes for a one */
-	return offset + find_first_bit(p, size - offset);
-}
-#define find_next_bit find_next_bit
-
-/*
- * ffz = Find First Zero in word. Undefined if no zero exists,
- * so code should check against ~0UL first..
- */
-static inline unsigned long ffz(unsigned long word)
-{
-	int res;
-
-	__asm__ __volatile__ ("bfffo %1{#0,#0},%0"
-			      : "=d" (res) : "d" (~word & -~word));
-	return res ^ 31;
-}
-
-#endif
-
-#ifdef __KERNEL__
-
-#if defined(CONFIG_CPU_HAS_NO_BITFIELDS)
-
-/*
- *	The newer ColdFire family members support a "bitrev" instruction
- *	and we can use that to implement a fast ffs. Older Coldfire parts,
- *	and normal 68000 parts don't have anything special, so we use the
- *	generic functions for those.
- */
-#if (defined(__mcfisaaplus__) || defined(__mcfisac__)) && \
-	!defined(CONFIG_M68000) && !defined(CONFIG_MCPU32)
-static inline int __ffs(int x)
-{
-	__asm__ __volatile__ ("bitrev %0; ff1 %0"
-		: "=d" (x)
-		: "0" (x));
-	return x;
-}
-
-static inline int ffs(int x)
-{
-	if (!x)
-		return 0;
-	return __ffs(x) + 1;
-}
-
-#else
-#include <asm-generic/bitops/ffs.h>
-#include <asm-generic/bitops/__ffs.h>
-#endif
-
-#include <asm-generic/bitops/fls.h>
-#include <asm-generic/bitops/__fls.h>
-
-#else
-
-/*
- *	ffs: find first bit set. This is defined the same way as
- *	the libc and compiler builtin ffs routines, therefore
- *	differs in spirit from the above ffz (man ffs).
- */
-static inline int ffs(int x)
-{
-	int cnt;
-
-	__asm__ ("bfffo %1{#0:#0},%0"
-		: "=d" (cnt)
-		: "dm" (x & -x));
-	return 32 - cnt;
-}
-#define __ffs(x) (ffs(x) - 1)
-
-/*
- *	fls: find last bit set.
- */
-static inline int fls(int x)
-{
-	int cnt;
-
-	__asm__ ("bfffo %1{#0,#0},%0"
-		: "=d" (cnt)
-		: "dm" (x));
-	return 32 - cnt;
-}
-
-static inline int __fls(int x)
-{
-	return fls(x) - 1;
-}
-
-#endif
-
-#include <asm-generic/bitops/ext2-atomic.h>
-#include <asm-generic/bitops/le.h>
-#include <asm-generic/bitops/fls64.h>
-#include <asm-generic/bitops/sched.h>
-#include <asm-generic/bitops/hweight.h>
-#include <asm-generic/bitops/lock.h>
-#endif /* __KERNEL__ */
-
-#endif /* _M68K_BITOPS_H */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/bitsperlong.h b/ANDROID_3.4.5/arch/m68k/include/asm/bitsperlong.h
deleted file mode 100644
index 6dc0bb0c..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/bitsperlong.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/bitsperlong.h>
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/blinken.h b/ANDROID_3.4.5/arch/m68k/include/asm/blinken.h
deleted file mode 100644
index 0626582a..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/blinken.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
-** asm/blinken.h -- m68k blinkenlights support (currently hp300 only)
-**
-** (c) 1998 Phil Blundell <philb@gnu.org>
-**
-** This file is subject to the terms and conditions of the GNU General Public
-** License.  See the file COPYING in the main directory of this archive
-** for more details.
-**
-*/
-
-#ifndef _M68K_BLINKEN_H
-#define _M68K_BLINKEN_H
-
-#include <asm/setup.h>
-#include <asm/io.h>
-
-#define HP300_LEDS		0xf001ffff
-
-extern unsigned char hp300_ledstate;
-
-static __inline__ void blinken_leds(int on, int off)
-{
-	if (MACH_IS_HP300)
-	{
-		hp300_ledstate |= on;
-		hp300_ledstate &= ~off;
-		out_8(HP300_LEDS, ~hp300_ledstate);
-	}
-}
-
-#endif
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/bootinfo.h b/ANDROID_3.4.5/arch/m68k/include/asm/bootinfo.h
deleted file mode 100644
index 67e7a78a..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/bootinfo.h
+++ /dev/null
@@ -1,378 +0,0 @@
-/*
-** asm/bootinfo.h -- Definition of the Linux/m68k boot information structure
-**
-** Copyright 1992 by Greg Harp
-**
-** This file is subject to the terms and conditions of the GNU General Public
-** License.  See the file COPYING in the main directory of this archive
-** for more details.
-**
-** Created 09/29/92 by Greg Harp
-**
-** 5/2/94 Roman Hodek:
-**   Added bi_atari part of the machine dependent union bi_un; for now it
-**   contains just a model field to distinguish between TT and Falcon.
-** 26/7/96 Roman Zippel:
-**   Renamed to setup.h; added some useful macros to allow gcc some
-**   optimizations if possible.
-** 5/10/96 Geert Uytterhoeven:
-**   Redesign of the boot information structure; renamed to bootinfo.h again
-** 27/11/96 Geert Uytterhoeven:
-**   Backwards compatibility with bootinfo interface version 1.0
-*/
-
-#ifndef _M68K_BOOTINFO_H
-#define _M68K_BOOTINFO_H
-
-
-    /*
-     *  Bootinfo definitions
-     *
-     *  This is an easily parsable and extendable structure containing all
-     *  information to be passed from the bootstrap to the kernel.
-     *
-     *  This way I hope to keep all future changes back/forewards compatible.
-     *  Thus, keep your fingers crossed...
-     *
-     *  This structure is copied right after the kernel bss by the bootstrap
-     *  routine.
-     */
-
-#ifndef __ASSEMBLY__
-
-struct bi_record {
-    unsigned short tag;			/* tag ID */
-    unsigned short size;		/* size of record (in bytes) */
-    unsigned long data[0];		/* data */
-};
-
-#endif /* __ASSEMBLY__ */
-
-
-    /*
-     *  Tag Definitions
-     *
-     *  Machine independent tags start counting from 0x0000
-     *  Machine dependent tags start counting from 0x8000
-     */
-
-#define BI_LAST			0x0000	/* last record (sentinel) */
-#define BI_MACHTYPE		0x0001	/* machine type (u_long) */
-#define BI_CPUTYPE		0x0002	/* cpu type (u_long) */
-#define BI_FPUTYPE		0x0003	/* fpu type (u_long) */
-#define BI_MMUTYPE		0x0004	/* mmu type (u_long) */
-#define BI_MEMCHUNK		0x0005	/* memory chunk address and size */
-					/* (struct mem_info) */
-#define BI_RAMDISK		0x0006	/* ramdisk address and size */
-					/* (struct mem_info) */
-#define BI_COMMAND_LINE		0x0007	/* kernel command line parameters */
-					/* (string) */
-
-    /*
-     *  Amiga-specific tags
-     */
-
-#define BI_AMIGA_MODEL		0x8000	/* model (u_long) */
-#define BI_AMIGA_AUTOCON	0x8001	/* AutoConfig device */
-					/* (struct ConfigDev) */
-#define BI_AMIGA_CHIP_SIZE	0x8002	/* size of Chip RAM (u_long) */
-#define BI_AMIGA_VBLANK		0x8003	/* VBLANK frequency (u_char) */
-#define BI_AMIGA_PSFREQ		0x8004	/* power supply frequency (u_char) */
-#define BI_AMIGA_ECLOCK		0x8005	/* EClock frequency (u_long) */
-#define BI_AMIGA_CHIPSET	0x8006	/* native chipset present (u_long) */
-#define BI_AMIGA_SERPER		0x8007	/* serial port period (u_short) */
-
-    /*
-     *  Atari-specific tags
-     */
-
-#define BI_ATARI_MCH_COOKIE	0x8000	/* _MCH cookie from TOS (u_long) */
-#define BI_ATARI_MCH_TYPE	0x8001	/* special machine type (u_long) */
-					/* (values are ATARI_MACH_* defines */
-
-/* mch_cookie values (upper word) */
-#define ATARI_MCH_ST		0
-#define ATARI_MCH_STE		1
-#define ATARI_MCH_TT		2
-#define ATARI_MCH_FALCON	3
-
-/* mch_type values */
-#define ATARI_MACH_NORMAL	0	/* no special machine type */
-#define ATARI_MACH_MEDUSA	1	/* Medusa 040 */
-#define ATARI_MACH_HADES	2	/* Hades 040 or 060 */
-#define ATARI_MACH_AB40		3	/* Afterburner040 on Falcon */
-
-    /*
-     *  VME-specific tags
-     */
-
-#define BI_VME_TYPE		0x8000	/* VME sub-architecture (u_long) */
-#define BI_VME_BRDINFO		0x8001	/* VME board information (struct) */
-
-/* BI_VME_TYPE codes */
-#define	VME_TYPE_TP34V		0x0034	/* Tadpole TP34V */
-#define VME_TYPE_MVME147	0x0147	/* Motorola MVME147 */
-#define VME_TYPE_MVME162	0x0162	/* Motorola MVME162 */
-#define VME_TYPE_MVME166	0x0166	/* Motorola MVME166 */
-#define VME_TYPE_MVME167	0x0167	/* Motorola MVME167 */
-#define VME_TYPE_MVME172	0x0172	/* Motorola MVME172 */
-#define VME_TYPE_MVME177	0x0177	/* Motorola MVME177 */
-#define VME_TYPE_BVME4000	0x4000	/* BVM Ltd. BVME4000 */
-#define VME_TYPE_BVME6000	0x6000	/* BVM Ltd. BVME6000 */
-
-/* BI_VME_BRDINFO is a 32 byte struct as returned by the Bug code on
- * Motorola VME boards.  Contains board number, Bug version, board
- * configuration options, etc.  See include/asm/mvme16xhw.h for details.
- */
-
-
-    /*
-     *  Macintosh-specific tags (all u_long)
-     */
-
-#define BI_MAC_MODEL		0x8000	/* Mac Gestalt ID (model type) */
-#define BI_MAC_VADDR		0x8001	/* Mac video base address */
-#define BI_MAC_VDEPTH		0x8002	/* Mac video depth */
-#define BI_MAC_VROW		0x8003	/* Mac video rowbytes */
-#define BI_MAC_VDIM		0x8004	/* Mac video dimensions */
-#define BI_MAC_VLOGICAL		0x8005	/* Mac video logical base */
-#define BI_MAC_SCCBASE		0x8006	/* Mac SCC base address */
-#define BI_MAC_BTIME		0x8007	/* Mac boot time */
-#define BI_MAC_GMTBIAS		0x8008	/* Mac GMT timezone offset */
-#define BI_MAC_MEMSIZE		0x8009	/* Mac RAM size (sanity check) */
-#define BI_MAC_CPUID		0x800a	/* Mac CPU type (sanity check) */
-#define BI_MAC_ROMBASE		0x800b	/* Mac system ROM base address */
-
-    /*
-     *  Macintosh hardware profile data - unused, see macintosh.h for
-     *  reasonable type values
-     */
-
-#define BI_MAC_VIA1BASE		0x8010	/* Mac VIA1 base address (always present) */
-#define BI_MAC_VIA2BASE		0x8011	/* Mac VIA2 base address (type varies) */
-#define BI_MAC_VIA2TYPE		0x8012	/* Mac VIA2 type (VIA, RBV, OSS) */
-#define BI_MAC_ADBTYPE		0x8013	/* Mac ADB interface type */
-#define BI_MAC_ASCBASE		0x8014	/* Mac Apple Sound Chip base address */
-#define BI_MAC_SCSI5380		0x8015	/* Mac NCR 5380 SCSI (base address, multi) */
-#define BI_MAC_SCSIDMA		0x8016	/* Mac SCSI DMA (base address) */
-#define BI_MAC_SCSI5396		0x8017	/* Mac NCR 53C96 SCSI (base address, multi) */
-#define BI_MAC_IDETYPE		0x8018	/* Mac IDE interface type */
-#define BI_MAC_IDEBASE		0x8019	/* Mac IDE interface base address */
-#define BI_MAC_NUBUS		0x801a	/* Mac Nubus type (none, regular, pseudo) */
-#define BI_MAC_SLOTMASK		0x801b	/* Mac Nubus slots present */
-#define BI_MAC_SCCTYPE		0x801c	/* Mac SCC serial type (normal, IOP) */
-#define BI_MAC_ETHTYPE		0x801d	/* Mac builtin ethernet type (Sonic, MACE */
-#define BI_MAC_ETHBASE		0x801e	/* Mac builtin ethernet base address */
-#define BI_MAC_PMU		0x801f	/* Mac power management / poweroff hardware */
-#define BI_MAC_IOP_SWIM		0x8020	/* Mac SWIM floppy IOP */
-#define BI_MAC_IOP_ADB		0x8021	/* Mac ADB IOP */
-
-    /*
-     * Mac: compatibility with old booter data format (temporarily)
-     * Fields unused with the new bootinfo can be deleted now; instead of
-     * adding new fields the struct might be splitted into a hardware address
-     * part and a hardware type part
-     */
-
-#ifndef __ASSEMBLY__
-
-struct mac_booter_data
-{
-	unsigned long videoaddr;
-	unsigned long videorow;
-	unsigned long videodepth;
-	unsigned long dimensions;
-	unsigned long args;
-	unsigned long boottime;
-	unsigned long gmtbias;
-	unsigned long bootver;
-	unsigned long videological;
-	unsigned long sccbase;
-	unsigned long id;
-	unsigned long memsize;
-	unsigned long serialmf;
-	unsigned long serialhsk;
-	unsigned long serialgpi;
-	unsigned long printmf;
-	unsigned long printhsk;
-	unsigned long printgpi;
-	unsigned long cpuid;
-	unsigned long rombase;
-	unsigned long adbdelay;
-	unsigned long timedbra;
-};
-
-extern struct mac_booter_data
-	mac_bi_data;
-
-#endif
-
-    /*
-     *  Apollo-specific tags
-     */
-
-#define BI_APOLLO_MODEL         0x8000  /* model (u_long) */
-
-    /*
-     *  HP300-specific tags
-     */
-
-#define BI_HP300_MODEL		0x8000	/* model (u_long) */
-#define BI_HP300_UART_SCODE	0x8001	/* UART select code (u_long) */
-#define BI_HP300_UART_ADDR	0x8002	/* phys. addr of UART (u_long) */
-
-    /*
-     * Stuff for bootinfo interface versioning
-     *
-     * At the start of kernel code, a 'struct bootversion' is located.
-     * bootstrap checks for a matching version of the interface before booting
-     * a kernel, to avoid user confusion if kernel and bootstrap don't work
-     * together :-)
-     *
-     * If incompatible changes are made to the bootinfo interface, the major
-     * number below should be stepped (and the minor reset to 0) for the
-     * appropriate machine. If a change is backward-compatible, the minor
-     * should be stepped. "Backwards-compatible" means that booting will work,
-     * but certain features may not.
-     */
-
-#define BOOTINFOV_MAGIC			0x4249561A	/* 'BIV^Z' */
-#define MK_BI_VERSION(major,minor)	(((major)<<16)+(minor))
-#define BI_VERSION_MAJOR(v)		(((v) >> 16) & 0xffff)
-#define BI_VERSION_MINOR(v)		((v) & 0xffff)
-
-#ifndef __ASSEMBLY__
-
-struct bootversion {
-    unsigned short branch;
-    unsigned long magic;
-    struct {
-	unsigned long machtype;
-	unsigned long version;
-    } machversions[0];
-};
-
-#endif /* __ASSEMBLY__ */
-
-#define AMIGA_BOOTI_VERSION    MK_BI_VERSION( 2, 0 )
-#define ATARI_BOOTI_VERSION    MK_BI_VERSION( 2, 1 )
-#define MAC_BOOTI_VERSION      MK_BI_VERSION( 2, 0 )
-#define MVME147_BOOTI_VERSION  MK_BI_VERSION( 2, 0 )
-#define MVME16x_BOOTI_VERSION  MK_BI_VERSION( 2, 0 )
-#define BVME6000_BOOTI_VERSION MK_BI_VERSION( 2, 0 )
-#define Q40_BOOTI_VERSION      MK_BI_VERSION( 2, 0 )
-#define HP300_BOOTI_VERSION    MK_BI_VERSION( 2, 0 )
-
-#ifdef BOOTINFO_COMPAT_1_0
-
-    /*
-     *  Backwards compatibility with bootinfo interface version 1.0
-     */
-
-#define COMPAT_AMIGA_BOOTI_VERSION    MK_BI_VERSION( 1, 0 )
-#define COMPAT_ATARI_BOOTI_VERSION    MK_BI_VERSION( 1, 0 )
-#define COMPAT_MAC_BOOTI_VERSION      MK_BI_VERSION( 1, 0 )
-
-#include <linux/zorro.h>
-
-#define COMPAT_NUM_AUTO    16
-
-struct compat_bi_Amiga {
-    int model;
-    int num_autocon;
-    struct ConfigDev autocon[COMPAT_NUM_AUTO];
-    unsigned long chip_size;
-    unsigned char vblank;
-    unsigned char psfreq;
-    unsigned long eclock;
-    unsigned long chipset;
-    unsigned long hw_present;
-};
-
-struct compat_bi_Atari {
-    unsigned long hw_present;
-    unsigned long mch_cookie;
-};
-
-#ifndef __ASSEMBLY__
-
-struct compat_bi_Macintosh
-{
-	unsigned long videoaddr;
-	unsigned long videorow;
-	unsigned long videodepth;
-	unsigned long dimensions;
-	unsigned long args;
-	unsigned long boottime;
-	unsigned long gmtbias;
-	unsigned long bootver;
-	unsigned long videological;
-	unsigned long sccbase;
-	unsigned long id;
-	unsigned long memsize;
-	unsigned long serialmf;
-	unsigned long serialhsk;
-	unsigned long serialgpi;
-	unsigned long printmf;
-	unsigned long printhsk;
-	unsigned long printgpi;
-	unsigned long cpuid;
-	unsigned long rombase;
-	unsigned long adbdelay;
-	unsigned long timedbra;
-};
-
-#endif
-
-struct compat_mem_info {
-    unsigned long addr;
-    unsigned long size;
-};
-
-#define COMPAT_NUM_MEMINFO  4
-
-#define COMPAT_CPUB_68020 0
-#define COMPAT_CPUB_68030 1
-#define COMPAT_CPUB_68040 2
-#define COMPAT_CPUB_68060 3
-#define COMPAT_FPUB_68881 5
-#define COMPAT_FPUB_68882 6
-#define COMPAT_FPUB_68040 7
-#define COMPAT_FPUB_68060 8
-
-#define COMPAT_CPU_68020    (1<<COMPAT_CPUB_68020)
-#define COMPAT_CPU_68030    (1<<COMPAT_CPUB_68030)
-#define COMPAT_CPU_68040    (1<<COMPAT_CPUB_68040)
-#define COMPAT_CPU_68060    (1<<COMPAT_CPUB_68060)
-#define COMPAT_CPU_MASK     (31)
-#define COMPAT_FPU_68881    (1<<COMPAT_FPUB_68881)
-#define COMPAT_FPU_68882    (1<<COMPAT_FPUB_68882)
-#define COMPAT_FPU_68040    (1<<COMPAT_FPUB_68040)
-#define COMPAT_FPU_68060    (1<<COMPAT_FPUB_68060)
-#define COMPAT_FPU_MASK     (0xfe0)
-
-#define COMPAT_CL_SIZE      (256)
-
-struct compat_bootinfo {
-    unsigned long machtype;
-    unsigned long cputype;
-    struct compat_mem_info memory[COMPAT_NUM_MEMINFO];
-    int num_memory;
-    unsigned long ramdisk_size;
-    unsigned long ramdisk_addr;
-    char command_line[COMPAT_CL_SIZE];
-    union {
-	struct compat_bi_Amiga     bi_ami;
-	struct compat_bi_Atari     bi_ata;
-	struct compat_bi_Macintosh bi_mac;
-    } bi_un;
-};
-
-#define bi_amiga	bi_un.bi_ami
-#define bi_atari	bi_un.bi_ata
-#define bi_mac		bi_un.bi_mac
-
-#endif /* BOOTINFO_COMPAT_1_0 */
-
-
-#endif /* _M68K_BOOTINFO_H */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/bootstd.h b/ANDROID_3.4.5/arch/m68k/include/asm/bootstd.h
deleted file mode 100644
index e518f5a5..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/bootstd.h
+++ /dev/null
@@ -1,132 +0,0 @@
-/* bootstd.h:  Bootloader system call interface
- *
- * (c) 1999, Rt-Control, Inc.
- */
-
-#ifndef __BOOTSTD_H__
-#define __BOOTSTD_H__
-
-#define NR_BSC 21            /* last used bootloader system call */
-
-#define __BN_reset        0  /* reset and start the bootloader */
-#define __BN_test         1  /* tests the system call interface */
-#define __BN_exec         2  /* executes a bootloader image */
-#define __BN_exit         3  /* terminates a bootloader image */
-#define __BN_program      4  /* program FLASH from a chain */
-#define __BN_erase        5  /* erase sector(s) of FLASH */
-#define __BN_open         6
-#define __BN_write        7
-#define __BN_read         8
-#define __BN_close        9
-#define __BN_mmap         10 /* map a file descriptor into memory */
-#define __BN_munmap       11 /* remove a file to memory mapping */
-#define __BN_gethwaddr    12 /* get the hardware address of my interfaces */
-#define __BN_getserialnum 13 /* get the serial number of this board */
-#define __BN_getbenv      14 /* get a bootloader envvar */
-#define __BN_setbenv      15 /* get a bootloader envvar */
-#define __BN_setpmask     16 /* set the protection mask */
-#define __BN_readenv      17 /* read environment variables */
-#define __BN_flash_chattr_range		18
-#define __BN_flash_erase_range		19
-#define __BN_flash_write_range		20
-
-/* Calling conventions compatible to (uC)linux/68k
- * We use similar macros to call into the bootloader as for uClinux
- */
-
-#define __bsc_return(type, res) \
-do { \
-   if ((unsigned long)(res) >= (unsigned long)(-64)) { \
-      /* let errno be a function, preserve res in %d0 */ \
-      int __err = -(res); \
-      errno = __err; \
-      res = -1; \
-   } \
-   return (type)(res); \
-} while (0)
-
-#define _bsc0(type,name) \
-type name(void) \
-{ \
-   register long __res __asm__ ("%d0") = __BN_##name; \
-   __asm__ __volatile__ ("trap #2" \
-                         : "=g" (__res) \
-                         : "0" (__res) \
-                         ); \
-   __bsc_return(type,__res); \
-}
-
-#define _bsc1(type,name,atype,a) \
-type name(atype a) \
-{ \
-   register long __res __asm__ ("%d0") = __BN_##name; \
-   register long __a __asm__ ("%d1") = (long)a; \
-   __asm__ __volatile__ ("trap #2" \
-                         : "=g" (__res) \
-                         : "0" (__res), "d" (__a) \
-                         ); \
-   __bsc_return(type,__res); \
-}
-
-#define _bsc2(type,name,atype,a,btype,b) \
-type name(atype a, btype b) \
-{ \
-   register long __res __asm__ ("%d0") = __BN_##name; \
-   register long __a __asm__ ("%d1") = (long)a; \
-   register long __b __asm__ ("%d2") = (long)b; \
-   __asm__ __volatile__ ("trap #2" \
-                         : "=g" (__res) \
-                         : "0" (__res), "d" (__a), "d" (__b) \
-                         ); \
-   __bsc_return(type,__res); \
-}
-
-#define _bsc3(type,name,atype,a,btype,b,ctype,c) \
-type name(atype a, btype b, ctype c) \
-{ \
-   register long __res __asm__ ("%d0") = __BN_##name; \
-   register long __a __asm__ ("%d1") = (long)a; \
-   register long __b __asm__ ("%d2") = (long)b; \
-   register long __c __asm__ ("%d3") = (long)c; \
-   __asm__ __volatile__ ("trap #2" \
-                         : "=g" (__res) \
-                         : "0" (__res), "d" (__a), "d" (__b), \
-                           "d" (__c) \
-                         ); \
-   __bsc_return(type,__res); \
-}
-
-#define _bsc4(type,name,atype,a,btype,b,ctype,c,dtype,d) \
-type name(atype a, btype b, ctype c, dtype d) \
-{ \
-   register long __res __asm__ ("%d0") = __BN_##name; \
-   register long __a __asm__ ("%d1") = (long)a; \
-   register long __b __asm__ ("%d2") = (long)b; \
-   register long __c __asm__ ("%d3") = (long)c; \
-   register long __d __asm__ ("%d4") = (long)d; \
-   __asm__ __volatile__ ("trap #2" \
-                         : "=g" (__res) \
-                         : "0" (__res), "d" (__a), "d" (__b), \
-                           "d" (__c), "d" (__d) \
-                         ); \
-   __bsc_return(type,__res); \
-}
-
-#define _bsc5(type,name,atype,a,btype,b,ctype,c,dtype,d,etype,e) \
-type name(atype a, btype b, ctype c, dtype d, etype e) \
-{ \
-   register long __res __asm__ ("%d0") = __BN_##name; \
-   register long __a __asm__ ("%d1") = (long)a; \
-   register long __b __asm__ ("%d2") = (long)b; \
-   register long __c __asm__ ("%d3") = (long)c; \
-   register long __d __asm__ ("%d4") = (long)d; \
-   register long __e __asm__ ("%d5") = (long)e; \
-   __asm__ __volatile__ ("trap #2" \
-                         : "=g" (__res) \
-                         : "0" (__res), "d" (__a), "d" (__b), \
-                           "d" (__c), "d" (__d), "d" (__e) \
-                         ); \
-   __bsc_return(type,__res); \
-}
-
-#endif /* __BOOTSTD_H__ */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/bug.h b/ANDROID_3.4.5/arch/m68k/include/asm/bug.h
deleted file mode 100644
index ef9a2e47..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/bug.h
+++ /dev/null
@@ -1,30 +0,0 @@
-#ifndef _M68K_BUG_H
-#define _M68K_BUG_H
-
-#ifdef CONFIG_MMU
-#ifdef CONFIG_BUG
-#ifdef CONFIG_DEBUG_BUGVERBOSE
-#ifndef CONFIG_SUN3
-#define BUG() do { \
-	printk("kernel BUG at %s:%d!\n", __FILE__, __LINE__); \
-	__builtin_trap(); \
-} while (0)
-#else
-#define BUG() do { \
-	printk("kernel BUG at %s:%d!\n", __FILE__, __LINE__); \
-	panic("BUG!"); \
-} while (0)
-#endif
-#else
-#define BUG() do { \
-	__builtin_trap(); \
-} while (0)
-#endif
-
-#define HAVE_ARCH_BUG
-#endif
-#endif /* CONFIG_MMU */
-
-#include <asm-generic/bug.h>
-
-#endif
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/bugs.h b/ANDROID_3.4.5/arch/m68k/include/asm/bugs.h
deleted file mode 100644
index d06207b9..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/bugs.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- *  include/asm-m68k/bugs.h
- *
- *  Copyright (C) 1994  Linus Torvalds
- */
-
-/*
- * This is included by init/main.c to check for architecture-dependent bugs.
- *
- * Needs:
- *	void check_bugs(void);
- */
-
-#ifdef CONFIG_MMU
-extern void check_bugs(void);	/* in arch/m68k/kernel/setup.c */
-#else
-static void check_bugs(void)
-{
-}
-#endif
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/bvme6000hw.h b/ANDROID_3.4.5/arch/m68k/include/asm/bvme6000hw.h
deleted file mode 100644
index f40d2f85..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/bvme6000hw.h
+++ /dev/null
@@ -1,150 +0,0 @@
-#ifndef _M68K_BVME6000HW_H_
-#define _M68K_BVME6000HW_H_
-
-#include <asm/irq.h>
-
-/*
- * PIT structure
- */
-
-#define BVME_PIT_BASE	0xffa00000
-
-typedef struct {
-	unsigned char
-	pad_a[3], pgcr,
-	pad_b[3], psrr,
-	pad_c[3], paddr,
-	pad_d[3], pbddr,
-	pad_e[3], pcddr,
-	pad_f[3], pivr,
-	pad_g[3], pacr,
-	pad_h[3], pbcr,
-	pad_i[3], padr,
-	pad_j[3], pbdr,
-	pad_k[3], paar,
-	pad_l[3], pbar,
-	pad_m[3], pcdr,
-	pad_n[3], psr,
-	pad_o[3], res1,
-	pad_p[3], res2,
-	pad_q[3], tcr,
-	pad_r[3], tivr,
-	pad_s[3], res3,
-	pad_t[3], cprh,
-	pad_u[3], cprm,
-	pad_v[3], cprl,
-	pad_w[3], res4,
-	pad_x[3], crh,
-	pad_y[3], crm,
-	pad_z[3], crl,
-	pad_A[3], tsr,
-	pad_B[3], res5;
-} PitRegs_t, *PitRegsPtr;
-
-#define bvmepit   ((*(volatile PitRegsPtr)(BVME_PIT_BASE)))
-
-#define BVME_RTC_BASE	0xff900000
-
-typedef struct {
-	unsigned char
-	pad_a[3], msr,
-	pad_b[3], t0cr_rtmr,
-	pad_c[3], t1cr_omr,
-	pad_d[3], pfr_icr0,
-	pad_e[3], irr_icr1,
-	pad_f[3], bcd_tenms,
-	pad_g[3], bcd_sec,
-	pad_h[3], bcd_min,
-	pad_i[3], bcd_hr,
-	pad_j[3], bcd_dom,
-	pad_k[3], bcd_mth,
-	pad_l[3], bcd_year,
-	pad_m[3], bcd_ujcc,
-	pad_n[3], bcd_hjcc,
-	pad_o[3], bcd_dow,
-	pad_p[3], t0lsb,
-	pad_q[3], t0msb,
-	pad_r[3], t1lsb,
-	pad_s[3], t1msb,
-	pad_t[3], cmp_sec,
-	pad_u[3], cmp_min,
-	pad_v[3], cmp_hr,
-	pad_w[3], cmp_dom,
-	pad_x[3], cmp_mth,
-	pad_y[3], cmp_dow,
-	pad_z[3], sav_sec,
-	pad_A[3], sav_min,
-	pad_B[3], sav_hr,
-	pad_C[3], sav_dom,
-	pad_D[3], sav_mth,
-	pad_E[3], ram,
-	pad_F[3], test;
-} RtcRegs_t, *RtcPtr_t;
-
-
-#define BVME_I596_BASE	0xff100000
-
-#define BVME_ETHIRQ_REG	0xff20000b
-
-#define BVME_LOCAL_IRQ_STAT  0xff20000f
-
-#define BVME_ETHERR          0x02
-#define BVME_ABORT_STATUS    0x08
-
-#define BVME_NCR53C710_BASE	0xff000000
-
-#define BVME_SCC_A_ADDR	0xffb0000b
-#define BVME_SCC_B_ADDR	0xffb00003
-#define BVME_SCC_RTxC	7372800
-
-#define BVME_CONFIG_REG	0xff500003
-
-#define config_reg_ptr	(volatile unsigned char *)BVME_CONFIG_REG
-
-#define BVME_CONFIG_SW1	0x08
-#define BVME_CONFIG_SW2	0x04
-#define BVME_CONFIG_SW3	0x02
-#define BVME_CONFIG_SW4	0x01
-
-
-#define BVME_IRQ_TYPE_PRIO	0
-
-#define BVME_IRQ_PRN		(IRQ_USER+20)
-#define BVME_IRQ_TIMER		(IRQ_USER+25)
-#define BVME_IRQ_I596		IRQ_AUTO_2
-#define BVME_IRQ_SCSI		IRQ_AUTO_3
-#define BVME_IRQ_RTC		IRQ_AUTO_6
-#define BVME_IRQ_ABORT		IRQ_AUTO_7
-
-/* SCC interrupts */
-#define BVME_IRQ_SCC_BASE		IRQ_USER
-#define BVME_IRQ_SCCB_TX		IRQ_USER
-#define BVME_IRQ_SCCB_STAT		(IRQ_USER+2)
-#define BVME_IRQ_SCCB_RX		(IRQ_USER+4)
-#define BVME_IRQ_SCCB_SPCOND		(IRQ_USER+6)
-#define BVME_IRQ_SCCA_TX		(IRQ_USER+8)
-#define BVME_IRQ_SCCA_STAT		(IRQ_USER+10)
-#define BVME_IRQ_SCCA_RX		(IRQ_USER+12)
-#define BVME_IRQ_SCCA_SPCOND		(IRQ_USER+14)
-
-/* Address control registers */
-
-#define BVME_ACR_A32VBA		0xff400003
-#define BVME_ACR_A32MSK		0xff410003
-#define BVME_ACR_A24VBA		0xff420003
-#define BVME_ACR_A24MSK		0xff430003
-#define BVME_ACR_A16VBA		0xff440003
-#define BVME_ACR_A32LBA		0xff450003
-#define BVME_ACR_A24LBA		0xff460003
-#define BVME_ACR_ADDRCTL	0xff470003
-
-#define bvme_acr_a32vba		*(volatile unsigned char *)BVME_ACR_A32VBA
-#define bvme_acr_a32msk		*(volatile unsigned char *)BVME_ACR_A32MSK
-#define bvme_acr_a24vba		*(volatile unsigned char *)BVME_ACR_A24VBA
-#define bvme_acr_a24msk		*(volatile unsigned char *)BVME_ACR_A24MSK
-#define bvme_acr_a16vba		*(volatile unsigned char *)BVME_ACR_A16VBA
-#define bvme_acr_a32lba		*(volatile unsigned char *)BVME_ACR_A32LBA
-#define bvme_acr_a24lba		*(volatile unsigned char *)BVME_ACR_A24LBA
-#define bvme_acr_addrctl	*(volatile unsigned char *)BVME_ACR_ADDRCTL
-
-#endif
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/byteorder.h b/ANDROID_3.4.5/arch/m68k/include/asm/byteorder.h
deleted file mode 100644
index 31b260a8..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/byteorder.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _M68K_BYTEORDER_H
-#define _M68K_BYTEORDER_H
-
-#include <linux/byteorder/big_endian.h>
-
-#endif /* _M68K_BYTEORDER_H */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/cache.h b/ANDROID_3.4.5/arch/m68k/include/asm/cache.h
deleted file mode 100644
index 0395c51e..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/cache.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * include/asm-m68k/cache.h
- */
-#ifndef __ARCH_M68K_CACHE_H
-#define __ARCH_M68K_CACHE_H
-
-/* bytes per L1 cache line */
-#define        L1_CACHE_SHIFT  4
-#define        L1_CACHE_BYTES  (1<< L1_CACHE_SHIFT)
-
-#define ARCH_DMA_MINALIGN	L1_CACHE_BYTES
-
-#endif
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/cachectl.h b/ANDROID_3.4.5/arch/m68k/include/asm/cachectl.h
deleted file mode 100644
index 525978e9..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/cachectl.h
+++ /dev/null
@@ -1,14 +0,0 @@
-#ifndef _M68K_CACHECTL_H
-#define _M68K_CACHECTL_H
-
-/* Definitions for the cacheflush system call.  */
-
-#define FLUSH_SCOPE_LINE    1	/* Flush a cache line */
-#define FLUSH_SCOPE_PAGE    2	/* Flush a page */
-#define FLUSH_SCOPE_ALL     3	/* Flush the whole cache -- superuser only */
-
-#define FLUSH_CACHE_DATA    1	/* Writeback and flush data cache */
-#define FLUSH_CACHE_INSN    2	/* Flush instruction cache */
-#define FLUSH_CACHE_BOTH    3	/* Flush both caches */
-
-#endif /* _M68K_CACHECTL_H */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/cacheflush.h b/ANDROID_3.4.5/arch/m68k/include/asm/cacheflush.h
deleted file mode 100644
index a70d7319..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/cacheflush.h
+++ /dev/null
@@ -1,5 +0,0 @@
-#ifdef __uClinux__
-#include "cacheflush_no.h"
-#else
-#include "cacheflush_mm.h"
-#endif
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/cacheflush_mm.h b/ANDROID_3.4.5/arch/m68k/include/asm/cacheflush_mm.h
deleted file mode 100644
index 8104bd87..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/cacheflush_mm.h
+++ /dev/null
@@ -1,235 +0,0 @@
-#ifndef _M68K_CACHEFLUSH_H
-#define _M68K_CACHEFLUSH_H
-
-#include <linux/mm.h>
-#ifdef CONFIG_COLDFIRE
-#include <asm/mcfsim.h>
-#endif
-
-/* cache code */
-#define FLUSH_I_AND_D	(0x00000808)
-#define FLUSH_I		(0x00000008)
-
-#ifndef ICACHE_MAX_ADDR
-#define ICACHE_MAX_ADDR	0
-#define ICACHE_SET_MASK	0
-#define DCACHE_MAX_ADDR	0
-#define DCACHE_SETMASK	0
-#endif
-
-static inline void flush_cf_icache(unsigned long start, unsigned long end)
-{
-	unsigned long set;
-
-	for (set = start; set <= end; set += (0x10 - 3)) {
-		__asm__ __volatile__ (
-			"cpushl %%ic,(%0)\n\t"
-			"addq%.l #1,%0\n\t"
-			"cpushl %%ic,(%0)\n\t"
-			"addq%.l #1,%0\n\t"
-			"cpushl %%ic,(%0)\n\t"
-			"addq%.l #1,%0\n\t"
-			"cpushl %%ic,(%0)"
-			: "=a" (set)
-			: "a" (set));
-	}
-}
-
-static inline void flush_cf_dcache(unsigned long start, unsigned long end)
-{
-	unsigned long set;
-
-	for (set = start; set <= end; set += (0x10 - 3)) {
-		__asm__ __volatile__ (
-			"cpushl %%dc,(%0)\n\t"
-			"addq%.l #1,%0\n\t"
-			"cpushl %%dc,(%0)\n\t"
-			"addq%.l #1,%0\n\t"
-			"cpushl %%dc,(%0)\n\t"
-			"addq%.l #1,%0\n\t"
-			"cpushl %%dc,(%0)"
-			: "=a" (set)
-			: "a" (set));
-	}
-}
-
-static inline void flush_cf_bcache(unsigned long start, unsigned long end)
-{
-	unsigned long set;
-
-	for (set = start; set <= end; set += (0x10 - 3)) {
-		__asm__ __volatile__ (
-			"cpushl %%bc,(%0)\n\t"
-			"addq%.l #1,%0\n\t"
-			"cpushl %%bc,(%0)\n\t"
-			"addq%.l #1,%0\n\t"
-			"cpushl %%bc,(%0)\n\t"
-			"addq%.l #1,%0\n\t"
-			"cpushl %%bc,(%0)"
-			: "=a" (set)
-			: "a" (set));
-	}
-}
-
-/*
- * Cache handling functions
- */
-
-static inline void flush_icache(void)
-{
-	if (CPU_IS_COLDFIRE) {
-		flush_cf_icache(0, ICACHE_MAX_ADDR);
-	} else if (CPU_IS_040_OR_060) {
-		asm volatile (	"nop\n"
-			"	.chip	68040\n"
-			"	cpusha	%bc\n"
-			"	.chip	68k");
-	} else {
-		unsigned long tmp;
-		asm volatile (	"movec	%%cacr,%0\n"
-			"	or.w	%1,%0\n"
-			"	movec	%0,%%cacr"
-			: "=&d" (tmp)
-			: "id" (FLUSH_I));
-	}
-}
-
-/*
- * invalidate the cache for the specified memory range.
- * It starts at the physical address specified for
- * the given number of bytes.
- */
-extern void cache_clear(unsigned long paddr, int len);
-/*
- * push any dirty cache in the specified memory range.
- * It starts at the physical address specified for
- * the given number of bytes.
- */
-extern void cache_push(unsigned long paddr, int len);
-
-/*
- * push and invalidate pages in the specified user virtual
- * memory range.
- */
-extern void cache_push_v(unsigned long vaddr, int len);
-
-/* This is needed whenever the virtual mapping of the current
-   process changes.  */
-#define __flush_cache_all()					\
-({								\
-	if (CPU_IS_COLDFIRE) {					\
-		flush_cf_dcache(0, DCACHE_MAX_ADDR);		\
-	} else if (CPU_IS_040_OR_060) {				\
-		__asm__ __volatile__("nop\n\t"			\
-				     ".chip 68040\n\t"		\
-				     "cpusha %dc\n\t"		\
-				     ".chip 68k");		\
-	} else {						\
-		unsigned long _tmp;				\
-		__asm__ __volatile__("movec %%cacr,%0\n\t"	\
-				     "orw %1,%0\n\t"		\
-				     "movec %0,%%cacr"		\
-				     : "=&d" (_tmp)		\
-				     : "di" (FLUSH_I_AND_D));	\
-	}							\
-})
-
-#define __flush_cache_030()					\
-({								\
-	if (CPU_IS_020_OR_030) {				\
-		unsigned long _tmp;				\
-		__asm__ __volatile__("movec %%cacr,%0\n\t"	\
-				     "orw %1,%0\n\t"		\
-				     "movec %0,%%cacr"		\
-				     : "=&d" (_tmp)		\
-				     : "di" (FLUSH_I_AND_D));	\
-	}							\
-})
-
-#define flush_cache_all() __flush_cache_all()
-
-#define flush_cache_vmap(start, end)		flush_cache_all()
-#define flush_cache_vunmap(start, end)		flush_cache_all()
-
-static inline void flush_cache_mm(struct mm_struct *mm)
-{
-	if (mm == current->mm)
-		__flush_cache_030();
-}
-
-#define flush_cache_dup_mm(mm)			flush_cache_mm(mm)
-
-/* flush_cache_range/flush_cache_page must be macros to avoid
-   a dependency on linux/mm.h, which includes this file... */
-static inline void flush_cache_range(struct vm_area_struct *vma,
-				     unsigned long start,
-				     unsigned long end)
-{
-	if (vma->vm_mm == current->mm)
-	        __flush_cache_030();
-}
-
-static inline void flush_cache_page(struct vm_area_struct *vma, unsigned long vmaddr, unsigned long pfn)
-{
-	if (vma->vm_mm == current->mm)
-	        __flush_cache_030();
-}
-
-
-/* Push the page at kernel virtual address and clear the icache */
-/* RZ: use cpush %bc instead of cpush %dc, cinv %ic */
-static inline void __flush_page_to_ram(void *vaddr)
-{
-	if (CPU_IS_COLDFIRE) {
-		unsigned long addr, start, end;
-		addr = ((unsigned long) vaddr) & ~(PAGE_SIZE - 1);
-		start = addr & ICACHE_SET_MASK;
-		end = (addr + PAGE_SIZE - 1) & ICACHE_SET_MASK;
-		if (start > end) {
-			flush_cf_bcache(0, end);
-			end = ICACHE_MAX_ADDR;
-		}
-		flush_cf_bcache(start, end);
-	} else if (CPU_IS_040_OR_060) {
-		__asm__ __volatile__("nop\n\t"
-				     ".chip 68040\n\t"
-				     "cpushp %%bc,(%0)\n\t"
-				     ".chip 68k"
-				     : : "a" (__pa(vaddr)));
-	} else {
-		unsigned long _tmp;
-		__asm__ __volatile__("movec %%cacr,%0\n\t"
-				     "orw %1,%0\n\t"
-				     "movec %0,%%cacr"
-				     : "=&d" (_tmp)
-				     : "di" (FLUSH_I));
-	}
-}
-
-#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 1
-#define flush_dcache_page(page)		__flush_page_to_ram(page_address(page))
-#define flush_dcache_mmap_lock(mapping)		do { } while (0)
-#define flush_dcache_mmap_unlock(mapping)	do { } while (0)
-#define flush_icache_page(vma, page)	__flush_page_to_ram(page_address(page))
-
-extern void flush_icache_user_range(struct vm_area_struct *vma, struct page *page,
-				    unsigned long addr, int len);
-extern void flush_icache_range(unsigned long address, unsigned long endaddr);
-
-static inline void copy_to_user_page(struct vm_area_struct *vma,
-				     struct page *page, unsigned long vaddr,
-				     void *dst, void *src, int len)
-{
-	flush_cache_page(vma, vaddr, page_to_pfn(page));
-	memcpy(dst, src, len);
-	flush_icache_user_range(vma, page, vaddr, len);
-}
-static inline void copy_from_user_page(struct vm_area_struct *vma,
-				       struct page *page, unsigned long vaddr,
-				       void *dst, void *src, int len)
-{
-	flush_cache_page(vma, vaddr, page_to_pfn(page));
-	memcpy(dst, src, len);
-}
-
-#endif /* _M68K_CACHEFLUSH_H */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/cacheflush_no.h b/ANDROID_3.4.5/arch/m68k/include/asm/cacheflush_no.h
deleted file mode 100644
index cb88aa96..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/cacheflush_no.h
+++ /dev/null
@@ -1,79 +0,0 @@
-#ifndef _M68KNOMMU_CACHEFLUSH_H
-#define _M68KNOMMU_CACHEFLUSH_H
-
-/*
- * (C) Copyright 2000-2010, Greg Ungerer <gerg@snapgear.com>
- */
-#include <linux/mm.h>
-#include <asm/mcfsim.h>
-
-#define flush_cache_all()			__flush_cache_all()
-#define flush_cache_mm(mm)			do { } while (0)
-#define flush_cache_dup_mm(mm)			do { } while (0)
-#define flush_cache_range(vma, start, end)	do { } while (0)
-#define flush_cache_page(vma, vmaddr)		do { } while (0)
-#define flush_dcache_range(start, len)		__flush_dcache_all()
-#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 0
-#define flush_dcache_page(page)			do { } while (0)
-#define flush_dcache_mmap_lock(mapping)		do { } while (0)
-#define flush_dcache_mmap_unlock(mapping)	do { } while (0)
-#define flush_icache_range(start, len)		__flush_icache_all()
-#define flush_icache_page(vma,pg)		do { } while (0)
-#define flush_icache_user_range(vma,pg,adr,len)	do { } while (0)
-#define flush_cache_vmap(start, end)		do { } while (0)
-#define flush_cache_vunmap(start, end)		do { } while (0)
-
-#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
-	memcpy(dst, src, len)
-#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
-	memcpy(dst, src, len)
-
-void mcf_cache_push(void);
-
-static inline void __flush_cache_all(void)
-{
-#ifdef CACHE_PUSH
-	mcf_cache_push();
-#endif
-#ifdef CACHE_INVALIDATE
-	__asm__ __volatile__ (
-		"movel	%0, %%d0\n\t"
-		"movec	%%d0, %%CACR\n\t"
-		"nop\n\t"
-		: : "i" (CACHE_INVALIDATE) : "d0" );
-#endif
-}
-
-/*
- * Some ColdFire parts implement separate instruction and data caches,
- * on those we should just flush the appropriate cache. If we don't need
- * to do any specific flushing then this will be optimized away.
- */
-static inline void __flush_icache_all(void)
-{
-#ifdef CACHE_INVALIDATEI
-	__asm__ __volatile__ (
-		"movel	%0, %%d0\n\t"
-		"movec	%%d0, %%CACR\n\t"
-		"nop\n\t"
-		: : "i" (CACHE_INVALIDATEI) : "d0" );
-#endif
-}
-
-static inline void __flush_dcache_all(void)
-{
-#ifdef CACHE_PUSH
-	mcf_cache_push();
-#endif
-#ifdef CACHE_INVALIDATED
-	__asm__ __volatile__ (
-		"movel	%0, %%d0\n\t"
-		"movec	%%d0, %%CACR\n\t"
-		"nop\n\t"
-		: : "i" (CACHE_INVALIDATED) : "d0" );
-#else
-	/* Flush the wrtite buffer */
-	__asm__ __volatile__ ( "nop" );
-#endif
-}
-#endif /* _M68KNOMMU_CACHEFLUSH_H */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/checksum.h b/ANDROID_3.4.5/arch/m68k/include/asm/checksum.h
deleted file mode 100644
index 2f88d867..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/checksum.h
+++ /dev/null
@@ -1,149 +0,0 @@
-#ifndef _M68K_CHECKSUM_H
-#define _M68K_CHECKSUM_H
-
-#include <linux/in6.h>
-
-#ifdef CONFIG_GENERIC_CSUM
-#include <asm-generic/checksum.h>
-#else
-
-/*
- * computes the checksum of a memory block at buff, length len,
- * and adds in "sum" (32-bit)
- *
- * returns a 32-bit number suitable for feeding into itself
- * or csum_tcpudp_magic
- *
- * this function must be called with even lengths, except
- * for the last fragment, which may be odd
- *
- * it's best to have buff aligned on a 32-bit boundary
- */
-__wsum csum_partial(const void *buff, int len, __wsum sum);
-
-/*
- * the same as csum_partial, but copies from src while it
- * checksums
- *
- * here even more important to align src and dst on a 32-bit (or even
- * better 64-bit) boundary
- */
-
-extern __wsum csum_partial_copy_from_user(const void __user *src,
-						void *dst,
-						int len, __wsum sum,
-						int *csum_err);
-
-extern __wsum csum_partial_copy_nocheck(const void *src,
-					      void *dst, int len,
-					      __wsum sum);
-
-/*
- *	This is a version of ip_fast_csum() optimized for IP headers,
- *	which always checksum on 4 octet boundaries.
- */
-static inline __sum16 ip_fast_csum(const void *iph, unsigned int ihl)
-{
-	unsigned int sum = 0;
-	unsigned long tmp;
-
-	__asm__ ("subqw #1,%2\n"
-		 "1:\t"
-		 "movel %1@+,%3\n\t"
-		 "addxl %3,%0\n\t"
-		 "dbra  %2,1b\n\t"
-		 "movel %0,%3\n\t"
-		 "swap  %3\n\t"
-		 "addxw %3,%0\n\t"
-		 "clrw  %3\n\t"
-		 "addxw %3,%0\n\t"
-		 : "=d" (sum), "=&a" (iph), "=&d" (ihl), "=&d" (tmp)
-		 : "0" (sum), "1" (iph), "2" (ihl)
-		 : "memory");
-	return (__force __sum16)~sum;
-}
-
-static inline __sum16 csum_fold(__wsum sum)
-{
-	unsigned int tmp = (__force u32)sum;
-
-	__asm__("swap %1\n\t"
-		"addw %1, %0\n\t"
-		"clrw %1\n\t"
-		"addxw %1, %0"
-		: "=&d" (sum), "=&d" (tmp)
-		: "0" (sum), "1" (tmp));
-
-	return (__force __sum16)~sum;
-}
-
-static inline __wsum
-csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len,
-		  unsigned short proto, __wsum sum)
-{
-	__asm__ ("addl  %2,%0\n\t"
-		 "addxl %3,%0\n\t"
-		 "addxl %4,%0\n\t"
-		 "clrl %1\n\t"
-		 "addxl %1,%0"
-		 : "=&d" (sum), "=d" (saddr)
-		 : "g" (daddr), "1" (saddr), "d" (len + proto),
-		   "0" (sum));
-	return sum;
-}
-
-
-/*
- * computes the checksum of the TCP/UDP pseudo-header
- * returns a 16-bit checksum, already complemented
- */
-static inline __sum16
-csum_tcpudp_magic(__be32 saddr, __be32 daddr, unsigned short len,
-		  unsigned short proto, __wsum sum)
-{
-	return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum));
-}
-
-/*
- * this routine is used for miscellaneous IP-like checksums, mainly
- * in icmp.c
- */
-
-static inline __sum16 ip_compute_csum(const void *buff, int len)
-{
-	return csum_fold (csum_partial(buff, len, 0));
-}
-
-#define _HAVE_ARCH_IPV6_CSUM
-static __inline__ __sum16
-csum_ipv6_magic(const struct in6_addr *saddr, const struct in6_addr *daddr,
-		__u32 len, unsigned short proto, __wsum sum)
-{
-	register unsigned long tmp;
-	__asm__("addl %2@,%0\n\t"
-		"movel %2@(4),%1\n\t"
-		"addxl %1,%0\n\t"
-		"movel %2@(8),%1\n\t"
-		"addxl %1,%0\n\t"
-		"movel %2@(12),%1\n\t"
-		"addxl %1,%0\n\t"
-		"movel %3@,%1\n\t"
-		"addxl %1,%0\n\t"
-		"movel %3@(4),%1\n\t"
-		"addxl %1,%0\n\t"
-		"movel %3@(8),%1\n\t"
-		"addxl %1,%0\n\t"
-		"movel %3@(12),%1\n\t"
-		"addxl %1,%0\n\t"
-		"addxl %4,%0\n\t"
-		"clrl %1\n\t"
-		"addxl %1,%0"
-		: "=&d" (sum), "=&d" (tmp)
-		: "a" (saddr), "a" (daddr), "d" (len + proto),
-		  "0" (sum));
-
-	return csum_fold(sum);
-}
-
-#endif /* CONFIG_GENERIC_CSUM */
-#endif /* _M68K_CHECKSUM_H */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/cmpxchg.h b/ANDROID_3.4.5/arch/m68k/include/asm/cmpxchg.h
deleted file mode 100644
index 5c81d0ea..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/cmpxchg.h
+++ /dev/null
@@ -1,141 +0,0 @@
-#ifndef __ARCH_M68K_CMPXCHG__
-#define __ARCH_M68K_CMPXCHG__
-
-#include <linux/irqflags.h>
-
-struct __xchg_dummy { unsigned long a[100]; };
-#define __xg(x) ((volatile struct __xchg_dummy *)(x))
-
-extern unsigned long __invalid_xchg_size(unsigned long, volatile void *, int);
-
-#ifndef CONFIG_RMW_INSNS
-static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int size)
-{
-	unsigned long flags, tmp;
-
-	local_irq_save(flags);
-
-	switch (size) {
-	case 1:
-		tmp = *(u8 *)ptr;
-		*(u8 *)ptr = x;
-		x = tmp;
-		break;
-	case 2:
-		tmp = *(u16 *)ptr;
-		*(u16 *)ptr = x;
-		x = tmp;
-		break;
-	case 4:
-		tmp = *(u32 *)ptr;
-		*(u32 *)ptr = x;
-		x = tmp;
-		break;
-	default:
-		tmp = __invalid_xchg_size(x, ptr, size);
-		break;
-	}
-
-	local_irq_restore(flags);
-	return x;
-}
-#else
-static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int size)
-{
-	switch (size) {
-	case 1:
-		__asm__ __volatile__
-			("moveb %2,%0\n\t"
-			 "1:\n\t"
-			 "casb %0,%1,%2\n\t"
-			 "jne 1b"
-			 : "=&d" (x) : "d" (x), "m" (*__xg(ptr)) : "memory");
-		break;
-	case 2:
-		__asm__ __volatile__
-			("movew %2,%0\n\t"
-			 "1:\n\t"
-			 "casw %0,%1,%2\n\t"
-			 "jne 1b"
-			 : "=&d" (x) : "d" (x), "m" (*__xg(ptr)) : "memory");
-		break;
-	case 4:
-		__asm__ __volatile__
-			("movel %2,%0\n\t"
-			 "1:\n\t"
-			 "casl %0,%1,%2\n\t"
-			 "jne 1b"
-			 : "=&d" (x) : "d" (x), "m" (*__xg(ptr)) : "memory");
-		break;
-	default:
-		x = __invalid_xchg_size(x, ptr, size);
-		break;
-	}
-	return x;
-}
-#endif
-
-#define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))
-
-#include <asm-generic/cmpxchg-local.h>
-
-#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n))
-
-extern unsigned long __invalid_cmpxchg_size(volatile void *,
-					    unsigned long, unsigned long, int);
-
-/*
- * Atomic compare and exchange.  Compare OLD with MEM, if identical,
- * store NEW in MEM.  Return the initial value in MEM.  Success is
- * indicated by comparing RETURN with OLD.
- */
-#ifdef CONFIG_RMW_INSNS
-#define __HAVE_ARCH_CMPXCHG	1
-
-static inline unsigned long __cmpxchg(volatile void *p, unsigned long old,
-				      unsigned long new, int size)
-{
-	switch (size) {
-	case 1:
-		__asm__ __volatile__ ("casb %0,%2,%1"
-				      : "=d" (old), "=m" (*(char *)p)
-				      : "d" (new), "0" (old), "m" (*(char *)p));
-		break;
-	case 2:
-		__asm__ __volatile__ ("casw %0,%2,%1"
-				      : "=d" (old), "=m" (*(short *)p)
-				      : "d" (new), "0" (old), "m" (*(short *)p));
-		break;
-	case 4:
-		__asm__ __volatile__ ("casl %0,%2,%1"
-				      : "=d" (old), "=m" (*(int *)p)
-				      : "d" (new), "0" (old), "m" (*(int *)p));
-		break;
-	default:
-		old = __invalid_cmpxchg_size(p, old, new, size);
-		break;
-	}
-	return old;
-}
-
-#define cmpxchg(ptr, o, n)						    \
-	((__typeof__(*(ptr)))__cmpxchg((ptr), (unsigned long)(o),	    \
-			(unsigned long)(n), sizeof(*(ptr))))
-#define cmpxchg_local(ptr, o, n)					    \
-	((__typeof__(*(ptr)))__cmpxchg((ptr), (unsigned long)(o),	    \
-			(unsigned long)(n), sizeof(*(ptr))))
-#else
-
-/*
- * cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make
- * them available.
- */
-#define cmpxchg_local(ptr, o, n)				  	       \
-	((__typeof__(*(ptr)))__cmpxchg_local_generic((ptr), (unsigned long)(o),\
-			(unsigned long)(n), sizeof(*(ptr))))
-
-#include <asm-generic/cmpxchg.h>
-
-#endif
-
-#endif /* __ARCH_M68K_CMPXCHG__ */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/coldfire.h b/ANDROID_3.4.5/arch/m68k/include/asm/coldfire.h
deleted file mode 100644
index c94557b9..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/coldfire.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/****************************************************************************/
-
-/*
- *	coldfire.h -- Motorola ColdFire CPU sepecific defines
- *
- *	(C) Copyright 1999-2006, Greg Ungerer (gerg@snapgear.com)
- *	(C) Copyright 2000, Lineo (www.lineo.com)
- */
-
-/****************************************************************************/
-#ifndef	coldfire_h
-#define	coldfire_h
-/****************************************************************************/
-
-
-/*
- *	Define master clock frequency. This is done at config time now.
- *	No point enumerating dozens of possible clock options here. And
- *	in any case new boards come along from time to time that have yet
- *	another different clocking frequency.
- */
-#ifdef CONFIG_CLOCK_SET
-#define	MCF_CLK		CONFIG_CLOCK_FREQ
-#else
-#error "Don't know what your ColdFire CPU clock frequency is??"
-#endif
-
-/*
- *	Define the processor internal peripherals base address.
- *
- *	The majority of ColdFire parts use an MBAR register to set
- *	the base address. Some have an IPSBAR register instead, and it
- *	has slightly different rules on its size and alignment. Some
- *	parts have fixed addresses and the internal peripherals cannot
- *	be relocated in the CPU address space.
- *
- *	The value of MBAR or IPSBAR is config time selectable, we no
- *	longer hard define it here. No MBAR or IPSBAR will be defined if
- *	this part has a fixed peripheral address map.
- */
-#ifdef CONFIG_MBAR
-#define	MCF_MBAR	CONFIG_MBAR
-#endif
-#ifdef CONFIG_IPSBAR
-#define	MCF_IPSBAR	CONFIG_IPSBAR
-#endif
-
-/****************************************************************************/
-#endif	/* coldfire_h */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/commproc.h b/ANDROID_3.4.5/arch/m68k/include/asm/commproc.h
deleted file mode 100644
index a7399852..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/commproc.h
+++ /dev/null
@@ -1,703 +0,0 @@
-
-/*
- * 68360 Communication Processor Module.
- * Copyright (c) 2000 Michael Leslie <mleslie@lineo.com> (mc68360) after:
- * Copyright (c) 1997 Dan Malek <dmalek@jlc.net> (mpc8xx)
- *
- * This file contains structures and information for the communication
- * processor channels.  Some CPM control and status is available
- * through the 68360 internal memory map.  See include/asm/360_immap.h for details.
- * This file is not a complete map of all of the 360 QUICC's capabilities
- *
- * On the MBX board, EPPC-Bug loads CPM microcode into the first 512
- * bytes of the DP RAM and relocates the I2C parameter area to the
- * IDMA1 space.  The remaining DP RAM is available for buffer descriptors
- * or other use.
- */
-#ifndef __CPM_360__
-#define __CPM_360__
-
-
-/* CPM Command register masks: */
-#define CPM_CR_RST	((ushort)0x8000)
-#define CPM_CR_OPCODE	((ushort)0x0f00)
-#define CPM_CR_CHAN	((ushort)0x00f0)
-#define CPM_CR_FLG	((ushort)0x0001)
-
-/* CPM Command set (opcodes): */
-#define CPM_CR_INIT_TRX		((ushort)0x0000)
-#define CPM_CR_INIT_RX		((ushort)0x0001)
-#define CPM_CR_INIT_TX		((ushort)0x0002)
-#define CPM_CR_HUNT_MODE	((ushort)0x0003)
-#define CPM_CR_STOP_TX		((ushort)0x0004)
-#define CPM_CR_GRSTOP_TX	((ushort)0x0005)
-#define CPM_CR_RESTART_TX	((ushort)0x0006)
-#define CPM_CR_CLOSE_RXBD	((ushort)0x0007)
-#define CPM_CR_SET_GADDR	((ushort)0x0008)
-#define CPM_CR_GCI_TIMEOUT	((ushort)0x0009)
-#define CPM_CR_GCI_ABORT	((ushort)0x000a)
-#define CPM_CR_RESET_BCS	((ushort)0x000a)
-
-/* CPM Channel numbers. */
-#define CPM_CR_CH_SCC1	((ushort)0x0000)
-#define CPM_CR_CH_SCC2	((ushort)0x0004)
-#define CPM_CR_CH_SPI	((ushort)0x0005)	/* SPI / Timers */
-#define CPM_CR_CH_TMR	((ushort)0x0005)
-#define CPM_CR_CH_SCC3	((ushort)0x0008)
-#define CPM_CR_CH_SMC1	((ushort)0x0009)	/* SMC1 / IDMA1 */
-#define CPM_CR_CH_IDMA1	((ushort)0x0009)
-#define CPM_CR_CH_SCC4	((ushort)0x000c)
-#define CPM_CR_CH_SMC2	((ushort)0x000d)	/* SMC2 / IDMA2 */
-#define CPM_CR_CH_IDMA2	((ushort)0x000d)
-
-
-#define mk_cr_cmd(CH, CMD)	((CMD << 8) | (CH << 4))
-
-#if 1 /* mleslie: I dinna think we have any such restrictions on
-       * DP RAM aboard the 360 board - see the MC68360UM p.3-3 */
-
-/* The dual ported RAM is multi-functional.  Some areas can be (and are
- * being) used for microcode.  There is an area that can only be used
- * as data ram for buffer descriptors, which is all we use right now.
- * Currently the first 512 and last 256 bytes are used for microcode.
- */
-/* mleslie: The uCquicc board is using no extra microcode in DPRAM */
-#define CPM_DATAONLY_BASE	((uint)0x0000)
-#define CPM_DATAONLY_SIZE	((uint)0x0800)
-#define CPM_DP_NOSPACE		((uint)0x7fffffff)
-
-#endif
-
-
-/* Export the base address of the communication processor registers
- * and dual port ram. */
-/* extern	cpm360_t	*cpmp; */		/* Pointer to comm processor */
-extern QUICC *pquicc;
-uint         m360_cpm_dpalloc(uint size);
-/* void         *m360_cpm_hostalloc(uint size); */
-void	      m360_cpm_setbrg(uint brg, uint rate);
-
-#if 0 /* use QUICC_BD declared in include/asm/m68360_quicc.h  */
-/* Buffer descriptors used by many of the CPM protocols. */
-typedef struct cpm_buf_desc {
-	ushort	cbd_sc;		/* Status and Control */
-	ushort	cbd_datlen;	/* Data length in buffer */
-	uint	cbd_bufaddr;	/* Buffer address in host memory */
-} cbd_t;
-#endif
-
-
-/* rx bd status/control bits */
-#define BD_SC_EMPTY	((ushort)0x8000)	/* Receive is empty */
-#define BD_SC_WRAP	((ushort)0x2000)	/* Last buffer descriptor in table */
-#define BD_SC_INTRPT	((ushort)0x1000)	/* Interrupt on change */
-#define BD_SC_LAST	((ushort)0x0800)	/* Last buffer in frame OR control char */
-
-#define BD_SC_FIRST	((ushort)0x0400)	/* 1st buffer in an HDLC frame */
-#define BD_SC_ADDR	((ushort)0x0400)	/* 1st byte is a multidrop address */
-
-#define BD_SC_CM	((ushort)0x0200)	/* Continuous mode */
-#define BD_SC_ID	((ushort)0x0100)	/* Received too many idles */
-
-#define BD_SC_AM	((ushort)0x0080)	/* Multidrop address match */
-#define BD_SC_DE	((ushort)0x0080)	/* DPLL Error (HDLC) */
-
-#define BD_SC_BR	((ushort)0x0020)	/* Break received */
-#define BD_SC_LG	((ushort)0x0020)	/* Frame length violation (HDLC) */
-
-#define BD_SC_FR	((ushort)0x0010)	/* Framing error */
-#define BD_SC_NO	((ushort)0x0010)	/* Nonoctet aligned frame (HDLC) */
-
-#define BD_SC_PR	((ushort)0x0008)	/* Parity error */
-#define BD_SC_AB	((ushort)0x0008)	/* Received abort Sequence (HDLC) */
-
-#define BD_SC_OV	((ushort)0x0002)	/* Overrun */
-#define BD_SC_CD	((ushort)0x0001)	/* Carrier Detect lost */
-
-/* tx bd status/control bits (as differ from rx bd) */
-#define BD_SC_READY	((ushort)0x8000)	/* Transmit is ready */
-#define BD_SC_TC	((ushort)0x0400)	/* Transmit CRC */
-#define BD_SC_P		((ushort)0x0100)	/* xmt preamble */
-#define BD_SC_UN	((ushort)0x0002)	/* Underrun */
-
-
-
-
-/* Parameter RAM offsets. */
-
-
-
-/* In 2.4 ppc, the PROFF_S?C? are used as byte offsets into DPRAM.
- * In 2.0, we use a more structured C struct map of DPRAM, and so 
- * instead, we need only a parameter ram `slot'  */
-
-#define PRSLOT_SCC1	0
-#define PRSLOT_SCC2	1
-#define PRSLOT_SCC3	2
-#define PRSLOT_SMC1	2
-#define PRSLOT_SCC4	3
-#define PRSLOT_SMC2	3
-
-
-/* #define PROFF_SCC1	((uint)0x0000) */
-/* #define PROFF_SCC2	((uint)0x0100) */
-/* #define PROFF_SCC3	((uint)0x0200) */
-/* #define PROFF_SMC1	((uint)0x0280) */
-/* #define PROFF_SCC4	((uint)0x0300) */
-/* #define PROFF_SMC2	((uint)0x0380) */
-
-
-/* Define enough so I can at least use the serial port as a UART.
- * The MBX uses SMC1 as the host serial port.
- */
-typedef struct smc_uart {
-	ushort	smc_rbase;	/* Rx Buffer descriptor base address */
-	ushort	smc_tbase;	/* Tx Buffer descriptor base address */
-	u_char	smc_rfcr;	/* Rx function code */
-	u_char	smc_tfcr;	/* Tx function code */
-	ushort	smc_mrblr;	/* Max receive buffer length */
-	uint	smc_rstate;	/* Internal */
-	uint	smc_idp;	/* Internal */
-	ushort	smc_rbptr;	/* Internal */
-	ushort	smc_ibc;	/* Internal */
-	uint	smc_rxtmp;	/* Internal */
-	uint	smc_tstate;	/* Internal */
-	uint	smc_tdp;	/* Internal */
-	ushort	smc_tbptr;	/* Internal */
-	ushort	smc_tbc;	/* Internal */
-	uint	smc_txtmp;	/* Internal */
-	ushort	smc_maxidl;	/* Maximum idle characters */
-	ushort	smc_tmpidl;	/* Temporary idle counter */
-	ushort	smc_brklen;	/* Last received break length */
-	ushort	smc_brkec;	/* rcv'd break condition counter */
-	ushort	smc_brkcr;	/* xmt break count register */
-	ushort	smc_rmask;	/* Temporary bit mask */
-} smc_uart_t;
-
-/* Function code bits.
-*/
-#define SMC_EB	((u_char)0x10)	/* Set big endian byte order */
-
-/* SMC uart mode register.
-*/
-#define	SMCMR_REN	((ushort)0x0001)
-#define SMCMR_TEN	((ushort)0x0002)
-#define SMCMR_DM	((ushort)0x000c)
-#define SMCMR_SM_GCI	((ushort)0x0000)
-#define SMCMR_SM_UART	((ushort)0x0020)
-#define SMCMR_SM_TRANS	((ushort)0x0030)
-#define SMCMR_SM_MASK	((ushort)0x0030)
-#define SMCMR_PM_EVEN	((ushort)0x0100)	/* Even parity, else odd */
-#define SMCMR_REVD	SMCMR_PM_EVEN
-#define SMCMR_PEN	((ushort)0x0200)	/* Parity enable */
-#define SMCMR_BS	SMCMR_PEN
-#define SMCMR_SL	((ushort)0x0400)	/* Two stops, else one */
-#define SMCR_CLEN_MASK	((ushort)0x7800)	/* Character length */
-#define smcr_mk_clen(C)	(((C) << 11) & SMCR_CLEN_MASK)
-
-/* SMC2 as Centronics parallel printer.  It is half duplex, in that
- * it can only receive or transmit.  The parameter ram values for
- * each direction are either unique or properly overlap, so we can
- * include them in one structure.
- */
-typedef struct smc_centronics {
-	ushort	scent_rbase;
-	ushort	scent_tbase;
-	u_char	scent_cfcr;
-	u_char	scent_smask;
-	ushort	scent_mrblr;
-	uint	scent_rstate;
-	uint	scent_r_ptr;
-	ushort	scent_rbptr;
-	ushort	scent_r_cnt;
-	uint	scent_rtemp;
-	uint	scent_tstate;
-	uint	scent_t_ptr;
-	ushort	scent_tbptr;
-	ushort	scent_t_cnt;
-	uint	scent_ttemp;
-	ushort	scent_max_sl;
-	ushort	scent_sl_cnt;
-	ushort	scent_character1;
-	ushort	scent_character2;
-	ushort	scent_character3;
-	ushort	scent_character4;
-	ushort	scent_character5;
-	ushort	scent_character6;
-	ushort	scent_character7;
-	ushort	scent_character8;
-	ushort	scent_rccm;
-	ushort	scent_rccr;
-} smc_cent_t;
-
-/* Centronics Status Mask Register.
-*/
-#define SMC_CENT_F	((u_char)0x08)
-#define SMC_CENT_PE	((u_char)0x04)
-#define SMC_CENT_S	((u_char)0x02)
-
-/* SMC Event and Mask register.
-*/
-#define	SMCM_BRKE	((unsigned char)0x40)	/* When in UART Mode */
-#define	SMCM_BRK	((unsigned char)0x10)	/* When in UART Mode */
-#define	SMCM_TXE	((unsigned char)0x10)	/* When in Transparent Mode */
-#define	SMCM_BSY	((unsigned char)0x04)
-#define	SMCM_TX		((unsigned char)0x02)
-#define	SMCM_RX		((unsigned char)0x01)
-
-/* Baud rate generators.
-*/
-#define CPM_BRG_RST		((uint)0x00020000)
-#define CPM_BRG_EN		((uint)0x00010000)
-#define CPM_BRG_EXTC_INT	((uint)0x00000000)
-#define CPM_BRG_EXTC_CLK2	((uint)0x00004000)
-#define CPM_BRG_EXTC_CLK6	((uint)0x00008000)
-#define CPM_BRG_ATB		((uint)0x00002000)
-#define CPM_BRG_CD_MASK		((uint)0x00001ffe)
-#define CPM_BRG_DIV16		((uint)0x00000001)
-
-/* SCCs.
-*/
-#define SCC_GSMRH_IRP		((uint)0x00040000)
-#define SCC_GSMRH_GDE		((uint)0x00010000)
-#define SCC_GSMRH_TCRC_CCITT	((uint)0x00008000)
-#define SCC_GSMRH_TCRC_BISYNC	((uint)0x00004000)
-#define SCC_GSMRH_TCRC_HDLC	((uint)0x00000000)
-#define SCC_GSMRH_REVD		((uint)0x00002000)
-#define SCC_GSMRH_TRX		((uint)0x00001000)
-#define SCC_GSMRH_TTX		((uint)0x00000800)
-#define SCC_GSMRH_CDP		((uint)0x00000400)
-#define SCC_GSMRH_CTSP		((uint)0x00000200)
-#define SCC_GSMRH_CDS		((uint)0x00000100)
-#define SCC_GSMRH_CTSS		((uint)0x00000080)
-#define SCC_GSMRH_TFL		((uint)0x00000040)
-#define SCC_GSMRH_RFW		((uint)0x00000020)
-#define SCC_GSMRH_TXSY		((uint)0x00000010)
-#define SCC_GSMRH_SYNL16	((uint)0x0000000c)
-#define SCC_GSMRH_SYNL8		((uint)0x00000008)
-#define SCC_GSMRH_SYNL4		((uint)0x00000004)
-#define SCC_GSMRH_RTSM		((uint)0x00000002)
-#define SCC_GSMRH_RSYN		((uint)0x00000001)
-
-#define SCC_GSMRL_SIR		((uint)0x80000000)	/* SCC2 only */
-#define SCC_GSMRL_EDGE_NONE	((uint)0x60000000)
-#define SCC_GSMRL_EDGE_NEG	((uint)0x40000000)
-#define SCC_GSMRL_EDGE_POS	((uint)0x20000000)
-#define SCC_GSMRL_EDGE_BOTH	((uint)0x00000000)
-#define SCC_GSMRL_TCI		((uint)0x10000000)
-#define SCC_GSMRL_TSNC_3	((uint)0x0c000000)
-#define SCC_GSMRL_TSNC_4	((uint)0x08000000)
-#define SCC_GSMRL_TSNC_14	((uint)0x04000000)
-#define SCC_GSMRL_TSNC_INF	((uint)0x00000000)
-#define SCC_GSMRL_RINV		((uint)0x02000000)
-#define SCC_GSMRL_TINV		((uint)0x01000000)
-#define SCC_GSMRL_TPL_128	((uint)0x00c00000)
-#define SCC_GSMRL_TPL_64	((uint)0x00a00000)
-#define SCC_GSMRL_TPL_48	((uint)0x00800000)
-#define SCC_GSMRL_TPL_32	((uint)0x00600000)
-#define SCC_GSMRL_TPL_16	((uint)0x00400000)
-#define SCC_GSMRL_TPL_8		((uint)0x00200000)
-#define SCC_GSMRL_TPL_NONE	((uint)0x00000000)
-#define SCC_GSMRL_TPP_ALL1	((uint)0x00180000)
-#define SCC_GSMRL_TPP_01	((uint)0x00100000)
-#define SCC_GSMRL_TPP_10	((uint)0x00080000)
-#define SCC_GSMRL_TPP_ZEROS	((uint)0x00000000)
-#define SCC_GSMRL_TEND		((uint)0x00040000)
-#define SCC_GSMRL_TDCR_32	((uint)0x00030000)
-#define SCC_GSMRL_TDCR_16	((uint)0x00020000)
-#define SCC_GSMRL_TDCR_8	((uint)0x00010000)
-#define SCC_GSMRL_TDCR_1	((uint)0x00000000)
-#define SCC_GSMRL_RDCR_32	((uint)0x0000c000)
-#define SCC_GSMRL_RDCR_16	((uint)0x00008000)
-#define SCC_GSMRL_RDCR_8	((uint)0x00004000)
-#define SCC_GSMRL_RDCR_1	((uint)0x00000000)
-#define SCC_GSMRL_RENC_DFMAN	((uint)0x00003000)
-#define SCC_GSMRL_RENC_MANCH	((uint)0x00002000)
-#define SCC_GSMRL_RENC_FM0	((uint)0x00001000)
-#define SCC_GSMRL_RENC_NRZI	((uint)0x00000800)
-#define SCC_GSMRL_RENC_NRZ	((uint)0x00000000)
-#define SCC_GSMRL_TENC_DFMAN	((uint)0x00000600)
-#define SCC_GSMRL_TENC_MANCH	((uint)0x00000400)
-#define SCC_GSMRL_TENC_FM0	((uint)0x00000200)
-#define SCC_GSMRL_TENC_NRZI	((uint)0x00000100)
-#define SCC_GSMRL_TENC_NRZ	((uint)0x00000000)
-#define SCC_GSMRL_DIAG_LE	((uint)0x000000c0)	/* Loop and echo */
-#define SCC_GSMRL_DIAG_ECHO	((uint)0x00000080)
-#define SCC_GSMRL_DIAG_LOOP	((uint)0x00000040)
-#define SCC_GSMRL_DIAG_NORM	((uint)0x00000000)
-#define SCC_GSMRL_ENR		((uint)0x00000020)
-#define SCC_GSMRL_ENT		((uint)0x00000010)
-#define SCC_GSMRL_MODE_ENET	((uint)0x0000000c)
-#define SCC_GSMRL_MODE_DDCMP	((uint)0x00000009)
-#define SCC_GSMRL_MODE_BISYNC	((uint)0x00000008)
-#define SCC_GSMRL_MODE_V14	((uint)0x00000007)
-#define SCC_GSMRL_MODE_AHDLC	((uint)0x00000006)
-#define SCC_GSMRL_MODE_PROFIBUS	((uint)0x00000005)
-#define SCC_GSMRL_MODE_UART	((uint)0x00000004)
-#define SCC_GSMRL_MODE_SS7	((uint)0x00000003)
-#define SCC_GSMRL_MODE_ATALK	((uint)0x00000002)
-#define SCC_GSMRL_MODE_HDLC	((uint)0x00000000)
-
-#define SCC_TODR_TOD		((ushort)0x8000)
-
-/* SCC Event and Mask register.
-*/
-#define	SCCM_TXE	((unsigned char)0x10)
-#define	SCCM_BSY	((unsigned char)0x04)
-#define	SCCM_TX		((unsigned char)0x02)
-#define	SCCM_RX		((unsigned char)0x01)
-
-typedef struct scc_param {
-	ushort	scc_rbase;	/* Rx Buffer descriptor base address */
-	ushort	scc_tbase;	/* Tx Buffer descriptor base address */
-	u_char	scc_rfcr;	/* Rx function code */
-	u_char	scc_tfcr;	/* Tx function code */
-	ushort	scc_mrblr;	/* Max receive buffer length */
-	uint	scc_rstate;	/* Internal */
-	uint	scc_idp;	/* Internal */
-	ushort	scc_rbptr;	/* Internal */
-	ushort	scc_ibc;	/* Internal */
-	uint	scc_rxtmp;	/* Internal */
-	uint	scc_tstate;	/* Internal */
-	uint	scc_tdp;	/* Internal */
-	ushort	scc_tbptr;	/* Internal */
-	ushort	scc_tbc;	/* Internal */
-	uint	scc_txtmp;	/* Internal */
-	uint	scc_rcrc;	/* Internal */
-	uint	scc_tcrc;	/* Internal */
-} sccp_t;
-
-
-/* Function code bits.
- */
-#define SCC_EB	((u_char)0x10)	/* Set big endian byte order */
-#define SCC_FC_DMA ((u_char)0x08) /* Set SDMA */
-
-/* CPM Ethernet through SCC1.
- */
-typedef struct scc_enet {
-	sccp_t	sen_genscc;
-	uint	sen_cpres;	/* Preset CRC */
-	uint	sen_cmask;	/* Constant mask for CRC */
-	uint	sen_crcec;	/* CRC Error counter */
-	uint	sen_alec;	/* alignment error counter */
-	uint	sen_disfc;	/* discard frame counter */
-	ushort	sen_pads;	/* Tx short frame pad character */
-	ushort	sen_retlim;	/* Retry limit threshold */
-	ushort	sen_retcnt;	/* Retry limit counter */
-	ushort	sen_maxflr;	/* maximum frame length register */
-	ushort	sen_minflr;	/* minimum frame length register */
-	ushort	sen_maxd1;	/* maximum DMA1 length */
-	ushort	sen_maxd2;	/* maximum DMA2 length */
-	ushort	sen_maxd;	/* Rx max DMA */
-	ushort	sen_dmacnt;	/* Rx DMA counter */
-	ushort	sen_maxb;	/* Max BD byte count */
-	ushort	sen_gaddr1;	/* Group address filter */
-	ushort	sen_gaddr2;
-	ushort	sen_gaddr3;
-	ushort	sen_gaddr4;
-	uint	sen_tbuf0data0;	/* Save area 0 - current frame */
-	uint	sen_tbuf0data1;	/* Save area 1 - current frame */
-	uint	sen_tbuf0rba;	/* Internal */
-	uint	sen_tbuf0crc;	/* Internal */
-	ushort	sen_tbuf0bcnt;	/* Internal */
-	ushort	sen_paddrh;	/* physical address (MSB) */
-	ushort	sen_paddrm;
-	ushort	sen_paddrl;	/* physical address (LSB) */
-	ushort	sen_pper;	/* persistence */
-	ushort	sen_rfbdptr;	/* Rx first BD pointer */
-	ushort	sen_tfbdptr;	/* Tx first BD pointer */
-	ushort	sen_tlbdptr;	/* Tx last BD pointer */
-	uint	sen_tbuf1data0;	/* Save area 0 - current frame */
-	uint	sen_tbuf1data1;	/* Save area 1 - current frame */
-	uint	sen_tbuf1rba;	/* Internal */
-	uint	sen_tbuf1crc;	/* Internal */
-	ushort	sen_tbuf1bcnt;	/* Internal */
-	ushort	sen_txlen;	/* Tx Frame length counter */
-	ushort	sen_iaddr1;	/* Individual address filter */
-	ushort	sen_iaddr2;
-	ushort	sen_iaddr3;
-	ushort	sen_iaddr4;
-	ushort	sen_boffcnt;	/* Backoff counter */
-
-	/* NOTE: Some versions of the manual have the following items
-	 * incorrectly documented.  Below is the proper order.
-	 */
-	ushort	sen_taddrh;	/* temp address (MSB) */
-	ushort	sen_taddrm;
-	ushort	sen_taddrl;	/* temp address (LSB) */
-} scc_enet_t;
-
-
-
-#if defined (CONFIG_UCQUICC)
-/* uCquicc has the following signals connected to Ethernet:
- *  68360    - lxt905
- * PA0/RXD1  - rxd
- * PA1/TXD1  - txd
- * PA8/CLK1  - tclk
- * PA9/CLK2  - rclk
- * PC0/!RTS1 - t_en
- * PC1/!CTS1 - col
- * PC5/!CD1  - cd
- */
-#define PA_ENET_RXD	PA_RXD1
-#define PA_ENET_TXD	PA_TXD1
-#define PA_ENET_TCLK	PA_CLK1
-#define PA_ENET_RCLK	PA_CLK2
-#define PC_ENET_TENA	PC_RTS1
-#define PC_ENET_CLSN	PC_CTS1
-#define PC_ENET_RENA	PC_CD1
-
-/* Control bits in the SICR to route TCLK (CLK1) and RCLK (CLK2) to
- * SCC1.
- */
-#define SICR_ENET_MASK	((uint)0x000000ff)
-#define SICR_ENET_CLKRT	((uint)0x0000002c)
-
-#endif /* config_ucquicc */
-
-
-#ifdef MBX
-/* Bits in parallel I/O port registers that have to be set/cleared
- * to configure the pins for SCC1 use.  The TCLK and RCLK seem unique
- * to the MBX860 board.  Any two of the four available clocks could be
- * used, and the MPC860 cookbook manual has an example using different
- * clock pins.
- */
-#define PA_ENET_RXD	((ushort)0x0001)
-#define PA_ENET_TXD	((ushort)0x0002)
-#define PA_ENET_TCLK	((ushort)0x0200)
-#define PA_ENET_RCLK	((ushort)0x0800)
-#define PC_ENET_TENA	((ushort)0x0001)
-#define PC_ENET_CLSN	((ushort)0x0010)
-#define PC_ENET_RENA	((ushort)0x0020)
-
-/* Control bits in the SICR to route TCLK (CLK2) and RCLK (CLK4) to
- * SCC1.  Also, make sure GR1 (bit 24) and SC1 (bit 25) are zero.
- */
-#define SICR_ENET_MASK	((uint)0x000000ff)
-#define SICR_ENET_CLKRT	((uint)0x0000003d)
-#endif
-
-#ifdef CONFIG_RPXLITE
-/* This ENET stuff is for the MPC850 with ethernet on SCC2.  Some of
- * this may be unique to the RPX-Lite configuration.
- * Note TENA is on Port B.
- */
-#define PA_ENET_RXD	((ushort)0x0004)
-#define PA_ENET_TXD	((ushort)0x0008)
-#define PA_ENET_TCLK	((ushort)0x0200)
-#define PA_ENET_RCLK	((ushort)0x0800)
-#define PB_ENET_TENA	((uint)0x00002000)
-#define PC_ENET_CLSN	((ushort)0x0040)
-#define PC_ENET_RENA	((ushort)0x0080)
-
-#define SICR_ENET_MASK	((uint)0x0000ff00)
-#define SICR_ENET_CLKRT	((uint)0x00003d00)
-#endif
-
-#ifdef CONFIG_BSEIP
-/* This ENET stuff is for the MPC823 with ethernet on SCC2.
- * This is unique to the BSE ip-Engine board.
- */
-#define PA_ENET_RXD	((ushort)0x0004)
-#define PA_ENET_TXD	((ushort)0x0008)
-#define PA_ENET_TCLK	((ushort)0x0100)
-#define PA_ENET_RCLK	((ushort)0x0200)
-#define PB_ENET_TENA	((uint)0x00002000)
-#define PC_ENET_CLSN	((ushort)0x0040)
-#define PC_ENET_RENA	((ushort)0x0080)
-
-/* BSE uses port B and C bits for PHY control also.
-*/
-#define PB_BSE_POWERUP	((uint)0x00000004)
-#define PB_BSE_FDXDIS	((uint)0x00008000)
-#define PC_BSE_LOOPBACK	((ushort)0x0800)
-
-#define SICR_ENET_MASK	((uint)0x0000ff00)
-#define SICR_ENET_CLKRT	((uint)0x00002c00)
-#endif
-
-/* SCC Event register as used by Ethernet.
-*/
-#define SCCE_ENET_GRA	((ushort)0x0080)	/* Graceful stop complete */
-#define SCCE_ENET_TXE	((ushort)0x0010)	/* Transmit Error */
-#define SCCE_ENET_RXF	((ushort)0x0008)	/* Full frame received */
-#define SCCE_ENET_BSY	((ushort)0x0004)	/* All incoming buffers full */
-#define SCCE_ENET_TXB	((ushort)0x0002)	/* A buffer was transmitted */
-#define SCCE_ENET_RXB	((ushort)0x0001)	/* A buffer was received */
-
-/* SCC Mode Register (PMSR) as used by Ethernet.
-*/
-#define SCC_PMSR_HBC	((ushort)0x8000)	/* Enable heartbeat */
-#define SCC_PMSR_FC	((ushort)0x4000)	/* Force collision */
-#define SCC_PMSR_RSH	((ushort)0x2000)	/* Receive short frames */
-#define SCC_PMSR_IAM	((ushort)0x1000)	/* Check individual hash */
-#define SCC_PMSR_ENCRC	((ushort)0x0800)	/* Ethernet CRC mode */
-#define SCC_PMSR_PRO	((ushort)0x0200)	/* Promiscuous mode */
-#define SCC_PMSR_BRO	((ushort)0x0100)	/* Catch broadcast pkts */
-#define SCC_PMSR_SBT	((ushort)0x0080)	/* Special backoff timer */
-#define SCC_PMSR_LPB	((ushort)0x0040)	/* Set Loopback mode */
-#define SCC_PMSR_SIP	((ushort)0x0020)	/* Sample Input Pins */
-#define SCC_PMSR_LCW	((ushort)0x0010)	/* Late collision window */
-#define SCC_PMSR_NIB22	((ushort)0x000a)	/* Start frame search */
-#define SCC_PMSR_FDE	((ushort)0x0001)	/* Full duplex enable */
-
-/* Buffer descriptor control/status used by Ethernet receive.
-*/
-#define BD_ENET_RX_EMPTY	((ushort)0x8000)
-#define BD_ENET_RX_WRAP		((ushort)0x2000)
-#define BD_ENET_RX_INTR		((ushort)0x1000)
-#define BD_ENET_RX_LAST		((ushort)0x0800)
-#define BD_ENET_RX_FIRST	((ushort)0x0400)
-#define BD_ENET_RX_MISS		((ushort)0x0100)
-#define BD_ENET_RX_LG		((ushort)0x0020)
-#define BD_ENET_RX_NO		((ushort)0x0010)
-#define BD_ENET_RX_SH		((ushort)0x0008)
-#define BD_ENET_RX_CR		((ushort)0x0004)
-#define BD_ENET_RX_OV		((ushort)0x0002)
-#define BD_ENET_RX_CL		((ushort)0x0001)
-#define BD_ENET_RX_STATS	((ushort)0x013f)	/* All status bits */
-
-/* Buffer descriptor control/status used by Ethernet transmit.
-*/
-#define BD_ENET_TX_READY	((ushort)0x8000)
-#define BD_ENET_TX_PAD		((ushort)0x4000)
-#define BD_ENET_TX_WRAP		((ushort)0x2000)
-#define BD_ENET_TX_INTR		((ushort)0x1000)
-#define BD_ENET_TX_LAST		((ushort)0x0800)
-#define BD_ENET_TX_TC		((ushort)0x0400)
-#define BD_ENET_TX_DEF		((ushort)0x0200)
-#define BD_ENET_TX_HB		((ushort)0x0100)
-#define BD_ENET_TX_LC		((ushort)0x0080)
-#define BD_ENET_TX_RL		((ushort)0x0040)
-#define BD_ENET_TX_RCMASK	((ushort)0x003c)
-#define BD_ENET_TX_UN		((ushort)0x0002)
-#define BD_ENET_TX_CSL		((ushort)0x0001)
-#define BD_ENET_TX_STATS	((ushort)0x03ff)	/* All status bits */
-
-/* SCC as UART
-*/
-typedef struct scc_uart {
-	sccp_t	scc_genscc;
-	uint	scc_res1;	/* Reserved */
-	uint	scc_res2;	/* Reserved */
-	ushort	scc_maxidl;	/* Maximum idle chars */
-	ushort	scc_idlc;	/* temp idle counter */
-	ushort	scc_brkcr;	/* Break count register */
-	ushort	scc_parec;	/* receive parity error counter */
-	ushort	scc_frmec;	/* receive framing error counter */
-	ushort	scc_nosec;	/* receive noise counter */
-	ushort	scc_brkec;	/* receive break condition counter */
-	ushort	scc_brkln;	/* last received break length */
-	ushort	scc_uaddr1;	/* UART address character 1 */
-	ushort	scc_uaddr2;	/* UART address character 2 */
-	ushort	scc_rtemp;	/* Temp storage */
-	ushort	scc_toseq;	/* Transmit out of sequence char */
-	ushort	scc_char1;	/* control character 1 */
-	ushort	scc_char2;	/* control character 2 */
-	ushort	scc_char3;	/* control character 3 */
-	ushort	scc_char4;	/* control character 4 */
-	ushort	scc_char5;	/* control character 5 */
-	ushort	scc_char6;	/* control character 6 */
-	ushort	scc_char7;	/* control character 7 */
-	ushort	scc_char8;	/* control character 8 */
-	ushort	scc_rccm;	/* receive control character mask */
-	ushort	scc_rccr;	/* receive control character register */
-	ushort	scc_rlbc;	/* receive last break character */
-} scc_uart_t;
-
-/* SCC Event and Mask registers when it is used as a UART.
-*/
-#define UART_SCCM_GLR		((ushort)0x1000)
-#define UART_SCCM_GLT		((ushort)0x0800)
-#define UART_SCCM_AB		((ushort)0x0200)
-#define UART_SCCM_IDL		((ushort)0x0100)
-#define UART_SCCM_GRA		((ushort)0x0080)
-#define UART_SCCM_BRKE		((ushort)0x0040)
-#define UART_SCCM_BRKS		((ushort)0x0020)
-#define UART_SCCM_CCR		((ushort)0x0008)
-#define UART_SCCM_BSY		((ushort)0x0004)
-#define UART_SCCM_TX		((ushort)0x0002)
-#define UART_SCCM_RX		((ushort)0x0001)
-
-/* The SCC PMSR when used as a UART.
-*/
-#define SCU_PMSR_FLC		((ushort)0x8000)
-#define SCU_PMSR_SL		((ushort)0x4000)
-#define SCU_PMSR_CL		((ushort)0x3000)
-#define SCU_PMSR_UM		((ushort)0x0c00)
-#define SCU_PMSR_FRZ		((ushort)0x0200)
-#define SCU_PMSR_RZS		((ushort)0x0100)
-#define SCU_PMSR_SYN		((ushort)0x0080)
-#define SCU_PMSR_DRT		((ushort)0x0040)
-#define SCU_PMSR_PEN		((ushort)0x0010)
-#define SCU_PMSR_RPM		((ushort)0x000c)
-#define SCU_PMSR_REVP		((ushort)0x0008)
-#define SCU_PMSR_TPM		((ushort)0x0003)
-#define SCU_PMSR_TEVP		((ushort)0x0003)
-
-/* CPM Transparent mode SCC.
- */
-typedef struct scc_trans {
-	sccp_t	st_genscc;
-	uint	st_cpres;	/* Preset CRC */
-	uint	st_cmask;	/* Constant mask for CRC */
-} scc_trans_t;
-
-#define BD_SCC_TX_LAST		((ushort)0x0800)
-
-
-
-/* CPM interrupts.  There are nearly 32 interrupts generated by CPM
- * channels or devices.  All of these are presented to the PPC core
- * as a single interrupt.  The CPM interrupt handler dispatches its
- * own handlers, in a similar fashion to the PPC core handler.  We
- * use the table as defined in the manuals (i.e. no special high
- * priority and SCC1 == SCCa, etc...).
- */
-/* #define CPMVEC_NR		32 */
-/* #define	CPMVEC_PIO_PC15		((ushort)0x1f) */
-/* #define	CPMVEC_SCC1		((ushort)0x1e) */
-/* #define	CPMVEC_SCC2		((ushort)0x1d) */
-/* #define	CPMVEC_SCC3		((ushort)0x1c) */
-/* #define	CPMVEC_SCC4		((ushort)0x1b) */
-/* #define	CPMVEC_PIO_PC14		((ushort)0x1a) */
-/* #define	CPMVEC_TIMER1		((ushort)0x19) */
-/* #define	CPMVEC_PIO_PC13		((ushort)0x18) */
-/* #define	CPMVEC_PIO_PC12		((ushort)0x17) */
-/* #define	CPMVEC_SDMA_CB_ERR	((ushort)0x16) */
-/* #define CPMVEC_IDMA1		((ushort)0x15) */
-/* #define CPMVEC_IDMA2		((ushort)0x14) */
-/* #define CPMVEC_TIMER2		((ushort)0x12) */
-/* #define CPMVEC_RISCTIMER	((ushort)0x11) */
-/* #define CPMVEC_I2C		((ushort)0x10) */
-/* #define	CPMVEC_PIO_PC11		((ushort)0x0f) */
-/* #define	CPMVEC_PIO_PC10		((ushort)0x0e) */
-/* #define CPMVEC_TIMER3		((ushort)0x0c) */
-/* #define	CPMVEC_PIO_PC9		((ushort)0x0b) */
-/* #define	CPMVEC_PIO_PC8		((ushort)0x0a) */
-/* #define	CPMVEC_PIO_PC7		((ushort)0x09) */
-/* #define CPMVEC_TIMER4		((ushort)0x07) */
-/* #define	CPMVEC_PIO_PC6		((ushort)0x06) */
-/* #define	CPMVEC_SPI		((ushort)0x05) */
-/* #define	CPMVEC_SMC1		((ushort)0x04) */
-/* #define	CPMVEC_SMC2		((ushort)0x03) */
-/* #define	CPMVEC_PIO_PC5		((ushort)0x02) */
-/* #define	CPMVEC_PIO_PC4		((ushort)0x01) */
-/* #define	CPMVEC_ERROR		((ushort)0x00) */
-
-extern void cpm_install_handler(int vec, void (*handler)(void *), void *dev_id);
-
-/* CPM interrupt configuration vector.
-*/
-#define	CICR_SCD_SCC4		((uint)0x00c00000)	/* SCC4 @ SCCd */
-#define	CICR_SCC_SCC3		((uint)0x00200000)	/* SCC3 @ SCCc */
-#define	CICR_SCB_SCC2		((uint)0x00040000)	/* SCC2 @ SCCb */
-#define	CICR_SCA_SCC1		((uint)0x00000000)	/* SCC1 @ SCCa */
-#define CICR_IRL_MASK		((uint)0x0000e000)	/* Core interrupt */
-#define CICR_HP_MASK		((uint)0x00001f00)	/* Hi-pri int. */
-#define CICR_IEN		((uint)0x00000080)	/* Int. enable */
-#define CICR_SPS		((uint)0x00000001)	/* SCC Spread */
-#endif /* __CPM_360__ */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/contregs.h b/ANDROID_3.4.5/arch/m68k/include/asm/contregs.h
deleted file mode 100644
index d1ea750b..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/contregs.h
+++ /dev/null
@@ -1,53 +0,0 @@
-#ifndef _M68K_CONTREGS_H
-#define _M68K_CONTREGS_H
-
-/* contregs.h:  Addresses of registers in the ASI_CONTROL alternate address
- *              space. These are for the mmu's context register, etc.
- *
- * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
- */
-
-/* 3=sun3
-   4=sun4 (as in sun4 sysmaint student book)
-   c=sun4c (according to davem) */
-
-#define AC_IDPROM     0x00000000    /* 34  ID PROM, R/O, byte, 32 bytes      */
-#define AC_PAGEMAP    0x10000000    /* 3   Pagemap R/W, long                 */
-#define AC_SEGMAP     0x20000000    /* 3   Segment map, byte                 */
-#define AC_CONTEXT    0x30000000    /* 34c current mmu-context               */
-#define AC_SENABLE    0x40000000    /* 34c system dvma/cache/reset enable reg*/
-#define AC_UDVMA_ENB  0x50000000    /* 34  Not used on Sun boards, byte      */
-#define AC_BUS_ERROR  0x60000000    /* 34  Not cleared on read, byte.        */
-#define AC_SYNC_ERR   0x60000000    /*  c fault type                         */
-#define AC_SYNC_VA    0x60000004    /*  c fault virtual address              */
-#define AC_ASYNC_ERR  0x60000008    /*  c asynchronous fault type            */
-#define AC_ASYNC_VA   0x6000000c    /*  c async fault virtual address        */
-#define AC_LEDS       0x70000000    /* 34  Zero turns on LEDs, byte          */
-#define AC_CACHETAGS  0x80000000    /* 34c direct access to the VAC tags     */
-#define AC_CACHEDDATA 0x90000000    /* 3 c direct access to the VAC data     */
-#define AC_UDVMA_MAP  0xD0000000    /* 4  Not used on Sun boards, byte       */
-#define AC_VME_VECTOR 0xE0000000    /* 4  For non-Autovector VME, byte       */
-#define AC_BOOT_SCC   0xF0000000    /* 34  bypass to access Zilog 8530. byte.*/
-
-/* s=Swift, h=Ross_HyperSPARC, v=TI_Viking, t=Tsunami, r=Ross_Cypress        */
-#define AC_M_PCR      0x0000        /* shv Processor Control Reg             */
-#define AC_M_CTPR     0x0100        /* shv Context Table Pointer Reg         */
-#define AC_M_CXR      0x0200        /* shv Context Register                  */
-#define AC_M_SFSR     0x0300        /* shv Synchronous Fault Status Reg      */
-#define AC_M_SFAR     0x0400        /* shv Synchronous Fault Address Reg     */
-#define AC_M_AFSR     0x0500        /*  hv Asynchronous Fault Status Reg     */
-#define AC_M_AFAR     0x0600        /*  hv Asynchronous Fault Address Reg    */
-#define AC_M_RESET    0x0700        /*  hv Reset Reg                         */
-#define AC_M_RPR      0x1000        /*  hv Root Pointer Reg                  */
-#define AC_M_TSUTRCR  0x1000        /* s   TLB Replacement Ctrl Reg          */
-#define AC_M_IAPTP    0x1100        /*  hv Instruction Access PTP            */
-#define AC_M_DAPTP    0x1200        /*  hv Data Access PTP                   */
-#define AC_M_ITR      0x1300        /*  hv Index Tag Register                */
-#define AC_M_TRCR     0x1400        /*  hv TLB Replacement Control Reg       */
-#define AC_M_SFSRX    0x1300        /* s   Synch Fault Status Reg prim       */
-#define AC_M_SFARX    0x1400        /* s   Synch Fault Address Reg prim      */
-#define AC_M_RPR1     0x1500        /*  h  Root Pointer Reg (entry 2)        */
-#define AC_M_IAPTP1   0x1600        /*  h  Instruction Access PTP (entry 2)  */
-#define AC_M_DAPTP1   0x1700        /*  h  Data Access PTP (entry 2)         */
-
-#endif /* _M68K_CONTREGS_H */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/cputime.h b/ANDROID_3.4.5/arch/m68k/include/asm/cputime.h
deleted file mode 100644
index c79c5e89..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/cputime.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __M68K_CPUTIME_H
-#define __M68K_CPUTIME_H
-
-#include <asm-generic/cputime.h>
-
-#endif /* __M68K_CPUTIME_H */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/current.h b/ANDROID_3.4.5/arch/m68k/include/asm/current.h
deleted file mode 100644
index 91fcc535..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/current.h
+++ /dev/null
@@ -1,28 +0,0 @@
-#ifndef _M68K_CURRENT_H
-#define _M68K_CURRENT_H
-
-#ifdef CONFIG_MMU
-
-register struct task_struct *current __asm__("%a2");
-
-#else
-
-/*
- *	Rather than dedicate a register (as the m68k source does), we
- *	just keep a global,  we should probably just change it all to be
- *	current and lose _current_task.
- */
-#include <linux/thread_info.h>
-
-struct task_struct;
-
-static inline struct task_struct *get_current(void)
-{
-	return(current_thread_info()->task);
-}
-
-#define	current	get_current()
-
-#endif /* CONFNIG_MMU */
-
-#endif /* !(_M68K_CURRENT_H) */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/dbg.h b/ANDROID_3.4.5/arch/m68k/include/asm/dbg.h
deleted file mode 100644
index 27af3270..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/dbg.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#define DEBUG 1
-#ifdef CONFIG_COLDFIRE
-#define	BREAK asm volatile ("halt")
-#else
-#define BREAK *(volatile unsigned char *)0xdeadbee0 = 0
-#endif
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/delay.h b/ANDROID_3.4.5/arch/m68k/include/asm/delay.h
deleted file mode 100644
index 9c09becf..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/delay.h
+++ /dev/null
@@ -1,96 +0,0 @@
-#ifndef _M68K_DELAY_H
-#define _M68K_DELAY_H
-
-#include <asm/param.h>
-
-/*
- * Copyright (C) 1994 Hamish Macdonald
- * Copyright (C) 2004 Greg Ungerer <gerg@uclinux.com>
- *
- * Delay routines, using a pre-computed "loops_per_jiffy" value.
- */
-
-#if defined(CONFIG_COLDFIRE)
-/*
- * The ColdFire runs the delay loop at significantly different speeds
- * depending upon long word alignment or not.  We'll pad it to
- * long word alignment which is the faster version.
- * The 0x4a8e is of course a 'tstl %fp' instruction.  This is better
- * than using a NOP (0x4e71) instruction because it executes in one
- * cycle not three and doesn't allow for an arbitrary delay waiting
- * for bus cycles to finish.  Also fp/a6 isn't likely to cause a
- * stall waiting for the register to become valid if such is added
- * to the coldfire at some stage.
- */
-#define	DELAY_ALIGN	".balignw 4, 0x4a8e\n\t"
-#else
-/*
- * No instruction alignment required for other m68k types.
- */
-#define	DELAY_ALIGN
-#endif
-
-static inline void __delay(unsigned long loops)
-{
-	__asm__ __volatile__ (
-		DELAY_ALIGN
-		"1: subql #1,%0\n\t"
-		"jcc 1b"
-		: "=d" (loops)
-		: "0" (loops));
-}
-
-extern void __bad_udelay(void);
-
-
-#if defined(CONFIG_M68000) || defined(CONFIG_COLDFIRE)
-/*
- * The simpler m68k and ColdFire processors do not have a 32*32->64
- * multiply instruction. So we need to handle them a little differently.
- * We use a bit of shifting and a single 32*32->32 multiply to get close.
- * This is a macro so that the const version can factor out the first
- * multiply and shift.
- */
-#define	HZSCALE		(268435456 / (1000000 / HZ))
-
-#define	__const_udelay(u) \
-	__delay(((((u) * HZSCALE) >> 11) * (loops_per_jiffy >> 11)) >> 6)
-
-#else
-
-static inline void __xdelay(unsigned long xloops)
-{
-	unsigned long tmp;
-
-	__asm__ ("mulul %2,%0:%1"
-		: "=d" (xloops), "=d" (tmp)
-		: "d" (xloops), "1" (loops_per_jiffy));
-	__delay(xloops * HZ);
-}
-
-/*
- * The definition of __const_udelay is specifically made a macro so that
- * the const factor (4295 = 2**32 / 1000000) can be optimized out when
- * the delay is a const.
- */
-#define	__const_udelay(n)	(__xdelay((n) * 4295))
-
-#endif
-
-static inline void __udelay(unsigned long usecs)
-{
-	__const_udelay(usecs);
-}
-
-/*
- * Use only for very small delays ( < 1 msec).  Should probably use a
- * lookup table, really, as the multiplications take much too long with
- * short delays.  This is a "reasonable" implementation, though (and the
- * first constant multiplications gets optimized away if the delay is
- * a constant)
- */
-#define udelay(n) (__builtin_constant_p(n) ? \
-	((n) > 20000 ? __bad_udelay() : __const_udelay(n)) : __udelay(n))
-
-
-#endif /* defined(_M68K_DELAY_H) */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/device.h b/ANDROID_3.4.5/arch/m68k/include/asm/device.h
deleted file mode 100644
index d8f9872b..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/device.h
+++ /dev/null
@@ -1,7 +0,0 @@
-/*
- * Arch specific extensions to struct device
- *
- * This file is released under the GPLv2
- */
-#include <asm-generic/device.h>
-
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/div64.h b/ANDROID_3.4.5/arch/m68k/include/asm/div64.h
deleted file mode 100644
index 444ea8a0..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/div64.h
+++ /dev/null
@@ -1,34 +0,0 @@
-#ifndef _M68K_DIV64_H
-#define _M68K_DIV64_H
-
-#ifdef CONFIG_CPU_HAS_NO_MULDIV64
-#include <asm-generic/div64.h>
-#else
-
-#include <linux/types.h>
-
-/* n = n / base; return rem; */
-
-#define do_div(n, base) ({					\
-	union {							\
-		unsigned long n32[2];				\
-		unsigned long long n64;				\
-	} __n;							\
-	unsigned long __rem, __upper;				\
-								\
-	__n.n64 = (n);						\
-	if ((__upper = __n.n32[0])) {				\
-		asm ("divul.l %2,%1:%0"				\
-			: "=d" (__n.n32[0]), "=d" (__upper)	\
-			: "d" (base), "0" (__n.n32[0]));	\
-	}							\
-	asm ("divu.l %2,%1:%0"					\
-		: "=d" (__n.n32[1]), "=d" (__rem)		\
-		: "d" (base), "1" (__upper), "0" (__n.n32[1]));	\
-	(n) = __n.n64;						\
-	__rem;							\
-})
-
-#endif /* CONFIG_CPU_HAS_NO_MULDIV64 */
-
-#endif /* _M68K_DIV64_H */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/dma-mapping.h b/ANDROID_3.4.5/arch/m68k/include/asm/dma-mapping.h
deleted file mode 100644
index 17f7a459..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/dma-mapping.h
+++ /dev/null
@@ -1,102 +0,0 @@
-#ifndef _M68K_DMA_MAPPING_H
-#define _M68K_DMA_MAPPING_H
-
-#include <asm/cache.h>
-
-struct scatterlist;
-
-#ifndef CONFIG_MMU_SUN3
-static inline int dma_supported(struct device *dev, u64 mask)
-{
-	return 1;
-}
-
-static inline int dma_set_mask(struct device *dev, u64 mask)
-{
-	return 0;
-}
-
-extern void *dma_alloc_coherent(struct device *, size_t,
-				dma_addr_t *, gfp_t);
-extern void dma_free_coherent(struct device *, size_t,
-			      void *, dma_addr_t);
-
-static inline void *dma_alloc_noncoherent(struct device *dev, size_t size,
-					  dma_addr_t *handle, gfp_t flag)
-{
-	return dma_alloc_coherent(dev, size, handle, flag);
-}
-static inline void dma_free_noncoherent(struct device *dev, size_t size,
-					void *addr, dma_addr_t handle)
-{
-	dma_free_coherent(dev, size, addr, handle);
-}
-static inline void dma_cache_sync(struct device *dev, void *vaddr, size_t size,
-				  enum dma_data_direction dir)
-{
-	/* we use coherent allocation, so not much to do here. */
-}
-
-extern dma_addr_t dma_map_single(struct device *, void *, size_t,
-				 enum dma_data_direction);
-static inline void dma_unmap_single(struct device *dev, dma_addr_t addr,
-				    size_t size, enum dma_data_direction dir)
-{
-}
-
-extern dma_addr_t dma_map_page(struct device *, struct page *,
-			       unsigned long, size_t size,
-			       enum dma_data_direction);
-static inline void dma_unmap_page(struct device *dev, dma_addr_t address,
-				  size_t size, enum dma_data_direction dir)
-{
-}
-
-extern int dma_map_sg(struct device *, struct scatterlist *, int,
-		      enum dma_data_direction);
-static inline void dma_unmap_sg(struct device *dev, struct scatterlist *sg,
-				int nhwentries, enum dma_data_direction dir)
-{
-}
-
-extern void dma_sync_single_for_device(struct device *, dma_addr_t, size_t,
-				       enum dma_data_direction);
-extern void dma_sync_sg_for_device(struct device *, struct scatterlist *, int,
-				   enum dma_data_direction);
-
-static inline void dma_sync_single_range_for_device(struct device *dev,
-		dma_addr_t dma_handle, unsigned long offset, size_t size,
-		enum dma_data_direction direction)
-{
-	/* just sync everything for now */
-	dma_sync_single_for_device(dev, dma_handle, offset + size, direction);
-}
-
-static inline void dma_sync_single_for_cpu(struct device *dev, dma_addr_t handle,
-					   size_t size, enum dma_data_direction dir)
-{
-}
-
-static inline void dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg,
-				       int nents, enum dma_data_direction dir)
-{
-}
-
-static inline void dma_sync_single_range_for_cpu(struct device *dev,
-		dma_addr_t dma_handle, unsigned long offset, size_t size,
-		enum dma_data_direction direction)
-{
-	/* just sync everything for now */
-	dma_sync_single_for_cpu(dev, dma_handle, offset + size, direction);
-}
-
-static inline int dma_mapping_error(struct device *dev, dma_addr_t handle)
-{
-	return 0;
-}
-
-#else
-#include <asm-generic/dma-mapping-broken.h>
-#endif
-
-#endif  /* _M68K_DMA_MAPPING_H */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/dma.h b/ANDROID_3.4.5/arch/m68k/include/asm/dma.h
deleted file mode 100644
index 6fbdfe89..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/dma.h
+++ /dev/null
@@ -1,491 +0,0 @@
-#ifndef _M68K_DMA_H
-#define _M68K_DMA_H 1
-
-#ifdef CONFIG_COLDFIRE
-/*
- * ColdFire DMA Model:
- *   ColdFire DMA supports two forms of DMA: Single and Dual address. Single
- * address mode emits a source address, and expects that the device will either
- * pick up the data (DMA READ) or source data (DMA WRITE). This implies that
- * the device will place data on the correct byte(s) of the data bus, as the
- * memory transactions are always 32 bits. This implies that only 32 bit
- * devices will find single mode transfers useful. Dual address DMA mode
- * performs two cycles: source read and destination write. ColdFire will
- * align the data so that the device will always get the correct bytes, thus
- * is useful for 8 and 16 bit devices. This is the mode that is supported
- * below.
- *
- * AUG/22/2000 : added support for 32-bit Dual-Address-Mode (K) 2000
- *               Oliver Kamphenkel (O.Kamphenkel@tu-bs.de)
- *
- * AUG/25/2000 : addad support for 8, 16 and 32-bit Single-Address-Mode (K)2000
- *               Oliver Kamphenkel (O.Kamphenkel@tu-bs.de)
- *
- * APR/18/2002 : added proper support for MCF5272 DMA controller.
- *               Arthur Shipkowski (art@videon-central.com)
- */
-
-#include <asm/coldfire.h>
-#include <asm/mcfsim.h>
-#include <asm/mcfdma.h>
-
-/*
- * Set number of channels of DMA on ColdFire for different implementations.
- */
-#if defined(CONFIG_M5249) || defined(CONFIG_M5307) || defined(CONFIG_M5407) || \
-	defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x)
-#define MAX_M68K_DMA_CHANNELS 4
-#elif defined(CONFIG_M5272)
-#define MAX_M68K_DMA_CHANNELS 1
-#elif defined(CONFIG_M532x)
-#define MAX_M68K_DMA_CHANNELS 0
-#else
-#define MAX_M68K_DMA_CHANNELS 2
-#endif
-
-extern unsigned int dma_base_addr[MAX_M68K_DMA_CHANNELS];
-extern unsigned int dma_device_address[MAX_M68K_DMA_CHANNELS];
-
-#if !defined(CONFIG_M5272)
-#define DMA_MODE_WRITE_BIT  0x01  /* Memory/IO to IO/Memory select */
-#define DMA_MODE_WORD_BIT   0x02  /* 8 or 16 bit transfers */
-#define DMA_MODE_LONG_BIT   0x04  /* or 32 bit transfers */
-#define DMA_MODE_SINGLE_BIT 0x08  /* single-address-mode */
-
-/* I/O to memory, 8 bits, mode */
-#define DMA_MODE_READ	            0
-/* memory to I/O, 8 bits, mode */
-#define DMA_MODE_WRITE	            1
-/* I/O to memory, 16 bits, mode */
-#define DMA_MODE_READ_WORD          2
-/* memory to I/O, 16 bits, mode */
-#define DMA_MODE_WRITE_WORD         3
-/* I/O to memory, 32 bits, mode */
-#define DMA_MODE_READ_LONG          4
-/* memory to I/O, 32 bits, mode */
-#define DMA_MODE_WRITE_LONG         5
-/* I/O to memory, 8 bits, single-address-mode */
-#define DMA_MODE_READ_SINGLE        8
-/* memory to I/O, 8 bits, single-address-mode */
-#define DMA_MODE_WRITE_SINGLE       9
-/* I/O to memory, 16 bits, single-address-mode */
-#define DMA_MODE_READ_WORD_SINGLE  10
-/* memory to I/O, 16 bits, single-address-mode */
-#define DMA_MODE_WRITE_WORD_SINGLE 11
-/* I/O to memory, 32 bits, single-address-mode */
-#define DMA_MODE_READ_LONG_SINGLE  12
-/* memory to I/O, 32 bits, single-address-mode */
-#define DMA_MODE_WRITE_LONG_SINGLE 13
-
-#else /* CONFIG_M5272 is defined */
-
-/* Source static-address mode */
-#define DMA_MODE_SRC_SA_BIT 0x01
-/* Two bits to select between all four modes */
-#define DMA_MODE_SSIZE_MASK 0x06
-/* Offset to shift bits in */
-#define DMA_MODE_SSIZE_OFF  0x01
-/* Destination static-address mode */
-#define DMA_MODE_DES_SA_BIT 0x10
-/* Two bits to select between all four modes */
-#define DMA_MODE_DSIZE_MASK 0x60
-/* Offset to shift bits in */
-#define DMA_MODE_DSIZE_OFF  0x05
-/* Size modifiers */
-#define DMA_MODE_SIZE_LONG  0x00
-#define DMA_MODE_SIZE_BYTE  0x01
-#define DMA_MODE_SIZE_WORD  0x02
-#define DMA_MODE_SIZE_LINE  0x03
-
-/*
- * Aliases to help speed quick ports; these may be suboptimal, however. They
- * do not include the SINGLE mode modifiers since the MCF5272 does not have a
- * mode where the device is in control of its addressing.
- */
-
-/* I/O to memory, 8 bits, mode */
-#define DMA_MODE_READ	              ((DMA_MODE_SIZE_BYTE << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_BYTE << DMA_MODE_SSIZE_OFF) | DMA_SRC_SA_BIT)
-/* memory to I/O, 8 bits, mode */
-#define DMA_MODE_WRITE	            ((DMA_MODE_SIZE_BYTE << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_BYTE << DMA_MODE_SSIZE_OFF) | DMA_DES_SA_BIT)
-/* I/O to memory, 16 bits, mode */
-#define DMA_MODE_READ_WORD	        ((DMA_MODE_SIZE_WORD << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_WORD << DMA_MODE_SSIZE_OFF) | DMA_SRC_SA_BIT)
-/* memory to I/O, 16 bits, mode */
-#define DMA_MODE_WRITE_WORD         ((DMA_MODE_SIZE_WORD << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_WORD << DMA_MODE_SSIZE_OFF) | DMA_DES_SA_BIT)
-/* I/O to memory, 32 bits, mode */
-#define DMA_MODE_READ_LONG	        ((DMA_MODE_SIZE_LONG << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_LONG << DMA_MODE_SSIZE_OFF) | DMA_SRC_SA_BIT)
-/* memory to I/O, 32 bits, mode */
-#define DMA_MODE_WRITE_LONG         ((DMA_MODE_SIZE_LONG << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_LONG << DMA_MODE_SSIZE_OFF) | DMA_DES_SA_BIT)
-
-#endif /* !defined(CONFIG_M5272) */
-
-#if !defined(CONFIG_M5272)
-/* enable/disable a specific DMA channel */
-static __inline__ void enable_dma(unsigned int dmanr)
-{
-  volatile unsigned short *dmawp;
-
-#ifdef DMA_DEBUG
-  printk("enable_dma(dmanr=%d)\n", dmanr);
-#endif
-
-  dmawp = (unsigned short *) dma_base_addr[dmanr];
-  dmawp[MCFDMA_DCR] |= MCFDMA_DCR_EEXT;
-}
-
-static __inline__ void disable_dma(unsigned int dmanr)
-{
-  volatile unsigned short *dmawp;
-  volatile unsigned char  *dmapb;
-
-#ifdef DMA_DEBUG
-  printk("disable_dma(dmanr=%d)\n", dmanr);
-#endif
-
-  dmawp = (unsigned short *) dma_base_addr[dmanr];
-  dmapb = (unsigned char *) dma_base_addr[dmanr];
-
-  /* Turn off external requests, and stop any DMA in progress */
-  dmawp[MCFDMA_DCR] &= ~MCFDMA_DCR_EEXT;
-  dmapb[MCFDMA_DSR] = MCFDMA_DSR_DONE;
-}
-
-/*
- * Clear the 'DMA Pointer Flip Flop'.
- * Write 0 for LSB/MSB, 1 for MSB/LSB access.
- * Use this once to initialize the FF to a known state.
- * After that, keep track of it. :-)
- * --- In order to do that, the DMA routines below should ---
- * --- only be used while interrupts are disabled! ---
- *
- * This is a NOP for ColdFire. Provide a stub for compatibility.
- */
-static __inline__ void clear_dma_ff(unsigned int dmanr)
-{
-}
-
-/* set mode (above) for a specific DMA channel */
-static __inline__ void set_dma_mode(unsigned int dmanr, char mode)
-{
-
-  volatile unsigned char  *dmabp;
-  volatile unsigned short *dmawp;
-
-#ifdef DMA_DEBUG
-  printk("set_dma_mode(dmanr=%d,mode=%d)\n", dmanr, mode);
-#endif
-
-  dmabp = (unsigned char *) dma_base_addr[dmanr];
-  dmawp = (unsigned short *) dma_base_addr[dmanr];
-
-  /* Clear config errors */
-  dmabp[MCFDMA_DSR] = MCFDMA_DSR_DONE;
-
-  /* Set command register */
-  dmawp[MCFDMA_DCR] =
-    MCFDMA_DCR_INT |         /* Enable completion irq */
-    MCFDMA_DCR_CS |          /* Force one xfer per request */
-    MCFDMA_DCR_AA |          /* Enable auto alignment */
-    /* single-address-mode */
-    ((mode & DMA_MODE_SINGLE_BIT) ? MCFDMA_DCR_SAA : 0) |
-    /* sets s_rw (-> r/w) high if Memory to I/0 */
-    ((mode & DMA_MODE_WRITE_BIT) ? MCFDMA_DCR_S_RW : 0) |
-    /* Memory to I/O or I/O to Memory */
-    ((mode & DMA_MODE_WRITE_BIT) ? MCFDMA_DCR_SINC : MCFDMA_DCR_DINC) |
-    /* 32 bit, 16 bit or 8 bit transfers */
-    ((mode & DMA_MODE_WORD_BIT)  ? MCFDMA_DCR_SSIZE_WORD :
-     ((mode & DMA_MODE_LONG_BIT) ? MCFDMA_DCR_SSIZE_LONG :
-                                   MCFDMA_DCR_SSIZE_BYTE)) |
-    ((mode & DMA_MODE_WORD_BIT)  ? MCFDMA_DCR_DSIZE_WORD :
-     ((mode & DMA_MODE_LONG_BIT) ? MCFDMA_DCR_DSIZE_LONG :
-                                   MCFDMA_DCR_DSIZE_BYTE));
-
-#ifdef DEBUG_DMA
-  printk("%s(%d): dmanr=%d DSR[%x]=%x DCR[%x]=%x\n", __FILE__, __LINE__,
-         dmanr, (int) &dmabp[MCFDMA_DSR], dmabp[MCFDMA_DSR],
-	 (int) &dmawp[MCFDMA_DCR], dmawp[MCFDMA_DCR]);
-#endif
-}
-
-/* Set transfer address for specific DMA channel */
-static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a)
-{
-  volatile unsigned short *dmawp;
-  volatile unsigned int   *dmalp;
-
-#ifdef DMA_DEBUG
-  printk("set_dma_addr(dmanr=%d,a=%x)\n", dmanr, a);
-#endif
-
-  dmawp = (unsigned short *) dma_base_addr[dmanr];
-  dmalp = (unsigned int *) dma_base_addr[dmanr];
-
-  /* Determine which address registers are used for memory/device accesses */
-  if (dmawp[MCFDMA_DCR] & MCFDMA_DCR_SINC) {
-    /* Source incrementing, must be memory */
-    dmalp[MCFDMA_SAR] = a;
-    /* Set dest address, must be device */
-    dmalp[MCFDMA_DAR] = dma_device_address[dmanr];
-  } else {
-    /* Destination incrementing, must be memory */
-    dmalp[MCFDMA_DAR] = a;
-    /* Set source address, must be device */
-    dmalp[MCFDMA_SAR] = dma_device_address[dmanr];
-  }
-
-#ifdef DEBUG_DMA
-  printk("%s(%d): dmanr=%d DCR[%x]=%x SAR[%x]=%08x DAR[%x]=%08x\n",
-	__FILE__, __LINE__, dmanr, (int) &dmawp[MCFDMA_DCR], dmawp[MCFDMA_DCR],
-	(int) &dmalp[MCFDMA_SAR], dmalp[MCFDMA_SAR],
-	(int) &dmalp[MCFDMA_DAR], dmalp[MCFDMA_DAR]);
-#endif
-}
-
-/*
- * Specific for Coldfire - sets device address.
- * Should be called after the mode set call, and before set DMA address.
- */
-static __inline__ void set_dma_device_addr(unsigned int dmanr, unsigned int a)
-{
-#ifdef DMA_DEBUG
-  printk("set_dma_device_addr(dmanr=%d,a=%x)\n", dmanr, a);
-#endif
-
-  dma_device_address[dmanr] = a;
-}
-
-/*
- * NOTE 2: "count" represents _bytes_.
- */
-static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count)
-{
-  volatile unsigned short *dmawp;
-
-#ifdef DMA_DEBUG
-  printk("set_dma_count(dmanr=%d,count=%d)\n", dmanr, count);
-#endif
-
-  dmawp = (unsigned short *) dma_base_addr[dmanr];
-  dmawp[MCFDMA_BCR] = (unsigned short)count;
-}
-
-/*
- * Get DMA residue count. After a DMA transfer, this
- * should return zero. Reading this while a DMA transfer is
- * still in progress will return unpredictable results.
- * Otherwise, it returns the number of _bytes_ left to transfer.
- */
-static __inline__ int get_dma_residue(unsigned int dmanr)
-{
-  volatile unsigned short *dmawp;
-  unsigned short count;
-
-#ifdef DMA_DEBUG
-  printk("get_dma_residue(dmanr=%d)\n", dmanr);
-#endif
-
-  dmawp = (unsigned short *) dma_base_addr[dmanr];
-  count = dmawp[MCFDMA_BCR];
-  return((int) count);
-}
-#else /* CONFIG_M5272 is defined */
-
-/*
- * The MCF5272 DMA controller is very different than the controller defined above
- * in terms of register mapping.  For instance, with the exception of the 16-bit
- * interrupt register (IRQ#85, for reference), all of the registers are 32-bit.
- *
- * The big difference, however, is the lack of device-requested DMA.  All modes
- * are dual address transfer, and there is no 'device' setup or direction bit.
- * You can DMA between a device and memory, between memory and memory, or even between
- * two devices directly, with any combination of incrementing and non-incrementing
- * addresses you choose.  This puts a crimp in distinguishing between the 'device
- * address' set up by set_dma_device_addr.
- *
- * Therefore, there are two options.  One is to use set_dma_addr and set_dma_device_addr,
- * which will act exactly as above in -- it will look to see if the source is set to
- * autoincrement, and if so it will make the source use the set_dma_addr value and the
- * destination the set_dma_device_addr value.  Otherwise the source will be set to the
- * set_dma_device_addr value and the destination will get the set_dma_addr value.
- *
- * The other is to use the provided set_dma_src_addr and set_dma_dest_addr functions
- * and make it explicit.  Depending on what you're doing, one of these two should work
- * for you, but don't mix them in the same transfer setup.
- */
-
-/* enable/disable a specific DMA channel */
-static __inline__ void enable_dma(unsigned int dmanr)
-{
-  volatile unsigned int  *dmalp;
-
-#ifdef DMA_DEBUG
-  printk("enable_dma(dmanr=%d)\n", dmanr);
-#endif
-
-  dmalp = (unsigned int *) dma_base_addr[dmanr];
-  dmalp[MCFDMA_DMR] |= MCFDMA_DMR_EN;
-}
-
-static __inline__ void disable_dma(unsigned int dmanr)
-{
-  volatile unsigned int   *dmalp;
-
-#ifdef DMA_DEBUG
-  printk("disable_dma(dmanr=%d)\n", dmanr);
-#endif
-
-  dmalp = (unsigned int *) dma_base_addr[dmanr];
-
-  /* Turn off external requests, and stop any DMA in progress */
-  dmalp[MCFDMA_DMR] &= ~MCFDMA_DMR_EN;
-  dmalp[MCFDMA_DMR] |= MCFDMA_DMR_RESET;
-}
-
-/*
- * Clear the 'DMA Pointer Flip Flop'.
- * Write 0 for LSB/MSB, 1 for MSB/LSB access.
- * Use this once to initialize the FF to a known state.
- * After that, keep track of it. :-)
- * --- In order to do that, the DMA routines below should ---
- * --- only be used while interrupts are disabled! ---
- *
- * This is a NOP for ColdFire. Provide a stub for compatibility.
- */
-static __inline__ void clear_dma_ff(unsigned int dmanr)
-{
-}
-
-/* set mode (above) for a specific DMA channel */
-static __inline__ void set_dma_mode(unsigned int dmanr, char mode)
-{
-
-  volatile unsigned int   *dmalp;
-  volatile unsigned short *dmawp;
-
-#ifdef DMA_DEBUG
-  printk("set_dma_mode(dmanr=%d,mode=%d)\n", dmanr, mode);
-#endif
-  dmalp = (unsigned int *) dma_base_addr[dmanr];
-  dmawp = (unsigned short *) dma_base_addr[dmanr];
-
-  /* Clear config errors */
-  dmalp[MCFDMA_DMR] |= MCFDMA_DMR_RESET;
-
-  /* Set command register */
-  dmalp[MCFDMA_DMR] =
-    MCFDMA_DMR_RQM_DUAL |         /* Mandatory Request Mode setting */
-    MCFDMA_DMR_DSTT_SD  |         /* Set up addressing types; set to supervisor-data. */
-    MCFDMA_DMR_SRCT_SD  |         /* Set up addressing types; set to supervisor-data. */
-    /* source static-address-mode */
-    ((mode & DMA_MODE_SRC_SA_BIT) ? MCFDMA_DMR_SRCM_SA : MCFDMA_DMR_SRCM_IA) |
-    /* dest static-address-mode */
-    ((mode & DMA_MODE_DES_SA_BIT) ? MCFDMA_DMR_DSTM_SA : MCFDMA_DMR_DSTM_IA) |
-    /* burst, 32 bit, 16 bit or 8 bit transfers are separately configurable on the MCF5272 */
-    (((mode & DMA_MODE_SSIZE_MASK) >> DMA_MODE_SSIZE_OFF) << MCFDMA_DMR_DSTS_OFF) |
-    (((mode & DMA_MODE_SSIZE_MASK) >> DMA_MODE_SSIZE_OFF) << MCFDMA_DMR_SRCS_OFF);
-
-  dmawp[MCFDMA_DIR] |= MCFDMA_DIR_ASCEN;   /* Enable completion interrupts */
-
-#ifdef DEBUG_DMA
-  printk("%s(%d): dmanr=%d DMR[%x]=%x DIR[%x]=%x\n", __FILE__, __LINE__,
-         dmanr, (int) &dmalp[MCFDMA_DMR], dmabp[MCFDMA_DMR],
-	 (int) &dmawp[MCFDMA_DIR], dmawp[MCFDMA_DIR]);
-#endif
-}
-
-/* Set transfer address for specific DMA channel */
-static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a)
-{
-  volatile unsigned int   *dmalp;
-
-#ifdef DMA_DEBUG
-  printk("set_dma_addr(dmanr=%d,a=%x)\n", dmanr, a);
-#endif
-
-  dmalp = (unsigned int *) dma_base_addr[dmanr];
-
-  /* Determine which address registers are used for memory/device accesses */
-  if (dmalp[MCFDMA_DMR] & MCFDMA_DMR_SRCM) {
-    /* Source incrementing, must be memory */
-    dmalp[MCFDMA_DSAR] = a;
-    /* Set dest address, must be device */
-    dmalp[MCFDMA_DDAR] = dma_device_address[dmanr];
-  } else {
-    /* Destination incrementing, must be memory */
-    dmalp[MCFDMA_DDAR] = a;
-    /* Set source address, must be device */
-    dmalp[MCFDMA_DSAR] = dma_device_address[dmanr];
-  }
-
-#ifdef DEBUG_DMA
-  printk("%s(%d): dmanr=%d DMR[%x]=%x SAR[%x]=%08x DAR[%x]=%08x\n",
-	__FILE__, __LINE__, dmanr, (int) &dmawp[MCFDMA_DMR], dmawp[MCFDMA_DMR],
-	(int) &dmalp[MCFDMA_DSAR], dmalp[MCFDMA_DSAR],
-	(int) &dmalp[MCFDMA_DDAR], dmalp[MCFDMA_DDAR]);
-#endif
-}
-
-/*
- * Specific for Coldfire - sets device address.
- * Should be called after the mode set call, and before set DMA address.
- */
-static __inline__ void set_dma_device_addr(unsigned int dmanr, unsigned int a)
-{
-#ifdef DMA_DEBUG
-  printk("set_dma_device_addr(dmanr=%d,a=%x)\n", dmanr, a);
-#endif
-
-  dma_device_address[dmanr] = a;
-}
-
-/*
- * NOTE 2: "count" represents _bytes_.
- *
- * NOTE 3: While a 32-bit register, "count" is only a maximum 24-bit value.
- */
-static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count)
-{
-  volatile unsigned int *dmalp;
-
-#ifdef DMA_DEBUG
-  printk("set_dma_count(dmanr=%d,count=%d)\n", dmanr, count);
-#endif
-
-  dmalp = (unsigned int *) dma_base_addr[dmanr];
-  dmalp[MCFDMA_DBCR] = count;
-}
-
-/*
- * Get DMA residue count. After a DMA transfer, this
- * should return zero. Reading this while a DMA transfer is
- * still in progress will return unpredictable results.
- * Otherwise, it returns the number of _bytes_ left to transfer.
- */
-static __inline__ int get_dma_residue(unsigned int dmanr)
-{
-  volatile unsigned int *dmalp;
-  unsigned int count;
-
-#ifdef DMA_DEBUG
-  printk("get_dma_residue(dmanr=%d)\n", dmanr);
-#endif
-
-  dmalp = (unsigned int *) dma_base_addr[dmanr];
-  count = dmalp[MCFDMA_DBCR];
-  return(count);
-}
-
-#endif /* !defined(CONFIG_M5272) */
-#endif /* CONFIG_COLDFIRE */
-
-/* it's useless on the m68k, but unfortunately needed by the new
-   bootmem allocator (but this should do it for this) */
-#define MAX_DMA_ADDRESS PAGE_OFFSET
-
-#define MAX_DMA_CHANNELS 8
-
-extern int request_dma(unsigned int dmanr, const char * device_id);	/* reserve a DMA channel */
-extern void free_dma(unsigned int dmanr);	/* release it again */
-
-#define isa_dma_bridge_buggy    (0)
-
-#endif /* _M68K_DMA_H */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/dsp56k.h b/ANDROID_3.4.5/arch/m68k/include/asm/dsp56k.h
deleted file mode 100644
index 2d8c0c9f..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/dsp56k.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * linux/include/asm-m68k/dsp56k.h - defines and declarations for
- *                                   DSP56k device driver
- *
- * Copyright (C) 1996,1997 Fredrik Noring, lars brinkhoff & Tomas Berndtsson
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file COPYING in the main directory of this archive
- * for more details.
- */
-
-
-/* Used for uploading DSP binary code */
-struct dsp56k_upload {
-	int len;
-	char __user *bin;
-};
-
-/* For the DSP host flags */
-struct dsp56k_host_flags {
-	int dir;     /* Bit field. 1 = write output bit, 0 = do nothing.
-		      * 0x0000 means reading only, 0x0011 means
-		      * writing the bits stored in `out' on HF0 and HF1.
-		      * Note that HF2 and HF3 can only be read.
-		      */
-	int out;     /* Bit field like above. */
-	int status;  /* Host register's current state is returned */
-};
-
-/* ioctl command codes */
-#define DSP56K_UPLOAD	        1    /* Upload DSP binary program       */
-#define DSP56K_SET_TX_WSIZE	2    /* Host transmit word size (1-4)   */
-#define DSP56K_SET_RX_WSIZE	3    /* Host receive word size (1-4)    */
-#define DSP56K_HOST_FLAGS	4    /* Host flag registers             */
-#define DSP56K_HOST_CMD         5    /* Trig Host Command (0-31)        */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/dvma.h b/ANDROID_3.4.5/arch/m68k/include/asm/dvma.h
deleted file mode 100644
index 890bbf7e..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/dvma.h
+++ /dev/null
@@ -1,240 +0,0 @@
-/*
- * include/asm-m68k/dma.h
- *
- * Copyright 1995 (C) David S. Miller (davem@caip.rutgers.edu)
- *
- * Hacked to fit Sun3x needs by Thomas Bogendoerfer
- */
-
-#ifndef __M68K_DVMA_H
-#define __M68K_DVMA_H
-
-
-#define DVMA_PAGE_SHIFT	13
-#define DVMA_PAGE_SIZE	(1UL << DVMA_PAGE_SHIFT)
-#define DVMA_PAGE_MASK	(~(DVMA_PAGE_SIZE-1))
-#define DVMA_PAGE_ALIGN(addr)	ALIGN(addr, DVMA_PAGE_SIZE)
-
-extern void dvma_init(void);
-extern int dvma_map_iommu(unsigned long kaddr, unsigned long baddr,
-			  int len);
-
-#define dvma_malloc(x) dvma_malloc_align(x, 0)
-#define dvma_map(x, y) dvma_map_align(x, y, 0)
-#define dvma_map_vme(x, y) (dvma_map(x, y) & 0xfffff)
-#define dvma_map_align_vme(x, y, z) (dvma_map_align (x, y, z) & 0xfffff)
-extern unsigned long dvma_map_align(unsigned long kaddr, int len,
-			    int align);
-extern void *dvma_malloc_align(unsigned long len, unsigned long align);
-
-extern void dvma_unmap(void *baddr);
-extern void dvma_free(void *vaddr);
-
-
-#ifdef CONFIG_SUN3
-/* sun3 dvma page support */
-
-/* memory and pmegs potentially reserved for dvma */
-#define DVMA_PMEG_START 10
-#define DVMA_PMEG_END 16
-#define DVMA_START 0xf00000
-#define DVMA_END 0xfe0000
-#define DVMA_SIZE (DVMA_END-DVMA_START)
-#define IOMMU_TOTAL_ENTRIES 128
-#define IOMMU_ENTRIES 120
-
-/* empirical kludge -- dvma regions only seem to work right on 0x10000
-   byte boundaries */
-#define DVMA_REGION_SIZE 0x10000
-#define DVMA_ALIGN(addr) (((addr)+DVMA_REGION_SIZE-1) & \
-                         ~(DVMA_REGION_SIZE-1))
-
-/* virt <-> phys conversions */
-#define dvma_vtop(x) ((unsigned long)(x) & 0xffffff)
-#define dvma_ptov(x) ((unsigned long)(x) | 0xf000000)
-#define dvma_vtovme(x) ((unsigned long)(x) & 0x00fffff)
-#define dvma_vmetov(x) ((unsigned long)(x) | 0xff00000)
-#define dvma_vtob(x) dvma_vtop(x)
-#define dvma_btov(x) dvma_ptov(x)
-
-static inline int dvma_map_cpu(unsigned long kaddr, unsigned long vaddr,
-			       int len)
-{
-	return 0;
-}
-
-#else /* Sun3x */
-
-/* sun3x dvma page support */
-
-#define DVMA_START 0x0
-#define DVMA_END 0xf00000
-#define DVMA_SIZE (DVMA_END-DVMA_START)
-#define IOMMU_TOTAL_ENTRIES	   2048
-/* the prom takes the top meg */
-#define IOMMU_ENTRIES              (IOMMU_TOTAL_ENTRIES - 0x80)
-
-#define dvma_vtob(x) ((unsigned long)(x) & 0x00ffffff)
-#define dvma_btov(x) ((unsigned long)(x) | 0xff000000)
-
-extern int dvma_map_cpu(unsigned long kaddr, unsigned long vaddr, int len);
-
-
-
-/* everything below this line is specific to dma used for the onboard
-   ESP scsi on sun3x */
-
-/* Structure to describe the current status of DMA registers on the Sparc */
-struct sparc_dma_registers {
-  __volatile__ unsigned long cond_reg;	/* DMA condition register */
-  __volatile__ unsigned long st_addr;	/* Start address of this transfer */
-  __volatile__ unsigned long  cnt;	/* How many bytes to transfer */
-  __volatile__ unsigned long dma_test;	/* DMA test register */
-};
-
-/* DVMA chip revisions */
-enum dvma_rev {
-	dvmarev0,
-	dvmaesc1,
-	dvmarev1,
-	dvmarev2,
-	dvmarev3,
-	dvmarevplus,
-	dvmahme
-};
-
-#define DMA_HASCOUNT(rev)  ((rev)==dvmaesc1)
-
-/* Linux DMA information structure, filled during probe. */
-struct Linux_SBus_DMA {
-	struct Linux_SBus_DMA *next;
-	struct linux_sbus_device *SBus_dev;
-	struct sparc_dma_registers *regs;
-
-	/* Status, misc info */
-	int node;                /* Prom node for this DMA device */
-	int running;             /* Are we doing DMA now? */
-	int allocated;           /* Are we "owned" by anyone yet? */
-
-	/* Transfer information. */
-	unsigned long addr;      /* Start address of current transfer */
-	int nbytes;              /* Size of current transfer */
-	int realbytes;           /* For splitting up large transfers, etc. */
-
-	/* DMA revision */
-	enum dvma_rev revision;
-};
-
-extern struct Linux_SBus_DMA *dma_chain;
-
-/* Broken hardware... */
-#define DMA_ISBROKEN(dma)    ((dma)->revision == dvmarev1)
-#define DMA_ISESC1(dma)      ((dma)->revision == dvmaesc1)
-
-/* Fields in the cond_reg register */
-/* First, the version identification bits */
-#define DMA_DEVICE_ID    0xf0000000        /* Device identification bits */
-#define DMA_VERS0        0x00000000        /* Sunray DMA version */
-#define DMA_ESCV1        0x40000000        /* DMA ESC Version 1 */
-#define DMA_VERS1        0x80000000        /* DMA rev 1 */
-#define DMA_VERS2        0xa0000000        /* DMA rev 2 */
-#define DMA_VERHME       0xb0000000        /* DMA hme gate array */
-#define DMA_VERSPLUS     0x90000000        /* DMA rev 1 PLUS */
-
-#define DMA_HNDL_INTR    0x00000001        /* An IRQ needs to be handled */
-#define DMA_HNDL_ERROR   0x00000002        /* We need to take an error */
-#define DMA_FIFO_ISDRAIN 0x0000000c        /* The DMA FIFO is draining */
-#define DMA_INT_ENAB     0x00000010        /* Turn on interrupts */
-#define DMA_FIFO_INV     0x00000020        /* Invalidate the FIFO */
-#define DMA_ACC_SZ_ERR   0x00000040        /* The access size was bad */
-#define DMA_FIFO_STDRAIN 0x00000040        /* DMA_VERS1 Drain the FIFO */
-#define DMA_RST_SCSI     0x00000080        /* Reset the SCSI controller */
-#define DMA_RST_ENET     DMA_RST_SCSI      /* Reset the ENET controller */
-#define DMA_ST_WRITE     0x00000100        /* write from device to memory */
-#define DMA_ENABLE       0x00000200        /* Fire up DMA, handle requests */
-#define DMA_PEND_READ    0x00000400        /* DMA_VERS1/0/PLUS Pending Read */
-#define DMA_ESC_BURST    0x00000800        /* 1=16byte 0=32byte */
-#define DMA_READ_AHEAD   0x00001800        /* DMA read ahead partial longword */
-#define DMA_DSBL_RD_DRN  0x00001000        /* No EC drain on slave reads */
-#define DMA_BCNT_ENAB    0x00002000        /* If on, use the byte counter */
-#define DMA_TERM_CNTR    0x00004000        /* Terminal counter */
-#define DMA_CSR_DISAB    0x00010000        /* No FIFO drains during csr */
-#define DMA_SCSI_DISAB   0x00020000        /* No FIFO drains during reg */
-#define DMA_DSBL_WR_INV  0x00020000        /* No EC inval. on slave writes */
-#define DMA_ADD_ENABLE   0x00040000        /* Special ESC DVMA optimization */
-#define DMA_E_BURST8	 0x00040000	   /* ENET: SBUS r/w burst size */
-#define DMA_BRST_SZ      0x000c0000        /* SCSI: SBUS r/w burst size */
-#define DMA_BRST64       0x00080000        /* SCSI: 64byte bursts (HME on UltraSparc only) */
-#define DMA_BRST32       0x00040000        /* SCSI: 32byte bursts */
-#define DMA_BRST16       0x00000000        /* SCSI: 16byte bursts */
-#define DMA_BRST0        0x00080000        /* SCSI: no bursts (non-HME gate arrays) */
-#define DMA_ADDR_DISAB   0x00100000        /* No FIFO drains during addr */
-#define DMA_2CLKS        0x00200000        /* Each transfer = 2 clock ticks */
-#define DMA_3CLKS        0x00400000        /* Each transfer = 3 clock ticks */
-#define DMA_EN_ENETAUI   DMA_3CLKS         /* Put lance into AUI-cable mode */
-#define DMA_CNTR_DISAB   0x00800000        /* No IRQ when DMA_TERM_CNTR set */
-#define DMA_AUTO_NADDR   0x01000000        /* Use "auto nxt addr" feature */
-#define DMA_SCSI_ON      0x02000000        /* Enable SCSI dma */
-#define DMA_PARITY_OFF   0x02000000        /* HME: disable parity checking */
-#define DMA_LOADED_ADDR  0x04000000        /* Address has been loaded */
-#define DMA_LOADED_NADDR 0x08000000        /* Next address has been loaded */
-
-/* Values describing the burst-size property from the PROM */
-#define DMA_BURST1       0x01
-#define DMA_BURST2       0x02
-#define DMA_BURST4       0x04
-#define DMA_BURST8       0x08
-#define DMA_BURST16      0x10
-#define DMA_BURST32      0x20
-#define DMA_BURST64      0x40
-#define DMA_BURSTBITS    0x7f
-
-/* Determine highest possible final transfer address given a base */
-#define DMA_MAXEND(addr) (0x01000000UL-(((unsigned long)(addr))&0x00ffffffUL))
-
-/* Yes, I hack a lot of elisp in my spare time... */
-#define DMA_ERROR_P(regs)  ((((regs)->cond_reg) & DMA_HNDL_ERROR))
-#define DMA_IRQ_P(regs)    ((((regs)->cond_reg) & (DMA_HNDL_INTR | DMA_HNDL_ERROR)))
-#define DMA_WRITE_P(regs)  ((((regs)->cond_reg) & DMA_ST_WRITE))
-#define DMA_OFF(regs)      ((((regs)->cond_reg) &= (~DMA_ENABLE)))
-#define DMA_INTSOFF(regs)  ((((regs)->cond_reg) &= (~DMA_INT_ENAB)))
-#define DMA_INTSON(regs)   ((((regs)->cond_reg) |= (DMA_INT_ENAB)))
-#define DMA_PUNTFIFO(regs) ((((regs)->cond_reg) |= DMA_FIFO_INV))
-#define DMA_SETSTART(regs, addr)  ((((regs)->st_addr) = (char *) addr))
-#define DMA_BEGINDMA_W(regs) \
-        ((((regs)->cond_reg |= (DMA_ST_WRITE|DMA_ENABLE|DMA_INT_ENAB))))
-#define DMA_BEGINDMA_R(regs) \
-        ((((regs)->cond_reg |= ((DMA_ENABLE|DMA_INT_ENAB)&(~DMA_ST_WRITE)))))
-
-/* For certain DMA chips, we need to disable ints upon irq entry
- * and turn them back on when we are done.  So in any ESP interrupt
- * handler you *must* call DMA_IRQ_ENTRY upon entry and DMA_IRQ_EXIT
- * when leaving the handler.  You have been warned...
- */
-#define DMA_IRQ_ENTRY(dma, dregs) do { \
-        if(DMA_ISBROKEN(dma)) DMA_INTSOFF(dregs); \
-   } while (0)
-
-#define DMA_IRQ_EXIT(dma, dregs) do { \
-	if(DMA_ISBROKEN(dma)) DMA_INTSON(dregs); \
-   } while(0)
-
-/* Reset the friggin' thing... */
-#define DMA_RESET(dma) do { \
-	struct sparc_dma_registers *regs = dma->regs;                      \
-	/* Let the current FIFO drain itself */                            \
-	sparc_dma_pause(regs, (DMA_FIFO_ISDRAIN));                         \
-	/* Reset the logic */                                              \
-	regs->cond_reg |= (DMA_RST_SCSI);     /* assert */                 \
-	__delay(400);                         /* let the bits set ;) */    \
-	regs->cond_reg &= ~(DMA_RST_SCSI);    /* de-assert */              \
-	sparc_dma_enable_interrupts(regs);    /* Re-enable interrupts */   \
-	/* Enable FAST transfers if available */                           \
-	if(dma->revision>dvmarev1) regs->cond_reg |= DMA_3CLKS;            \
-	dma->running = 0;                                                  \
-} while(0)
-
-
-#endif /* !CONFIG_SUN3 */
-
-#endif /* !(__M68K_DVMA_H) */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/elf.h b/ANDROID_3.4.5/arch/m68k/include/asm/elf.h
deleted file mode 100644
index e9b7cda5..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/elf.h
+++ /dev/null
@@ -1,118 +0,0 @@
-#ifndef __ASMm68k_ELF_H
-#define __ASMm68k_ELF_H
-
-/*
- * ELF register definitions..
- */
-
-#include <asm/ptrace.h>
-#include <asm/user.h>
-
-/*
- * 68k ELF relocation types
- */
-#define R_68K_NONE	0
-#define R_68K_32	1
-#define R_68K_16	2
-#define R_68K_8		3
-#define R_68K_PC32	4
-#define R_68K_PC16	5
-#define R_68K_PC8	6
-#define R_68K_GOT32	7
-#define R_68K_GOT16	8
-#define R_68K_GOT8	9
-#define R_68K_GOT32O	10
-#define R_68K_GOT16O	11
-#define R_68K_GOT8O	12
-#define R_68K_PLT32	13
-#define R_68K_PLT16	14
-#define R_68K_PLT8	15
-#define R_68K_PLT32O	16
-#define R_68K_PLT16O	17
-#define R_68K_PLT8O	18
-#define R_68K_COPY	19
-#define R_68K_GLOB_DAT	20
-#define R_68K_JMP_SLOT	21
-#define R_68K_RELATIVE	22
-
-typedef unsigned long elf_greg_t;
-
-#define ELF_NGREG (sizeof(struct user_regs_struct) / sizeof(elf_greg_t))
-typedef elf_greg_t elf_gregset_t[ELF_NGREG];
-
-typedef struct user_m68kfp_struct elf_fpregset_t;
-
-/*
- * This is used to ensure we don't load something for the wrong architecture.
- */
-#define elf_check_arch(x) ((x)->e_machine == EM_68K)
-
-/*
- * These are used to set parameters in the core dumps.
- */
-#define ELF_CLASS	ELFCLASS32
-#define ELF_DATA	ELFDATA2MSB
-#define ELF_ARCH	EM_68K
-
-/* For SVR4/m68k the function pointer to be registered with `atexit' is
-   passed in %a1.  Although my copy of the ABI has no such statement, it
-   is actually used on ASV.  */
-#define ELF_PLAT_INIT(_r, load_addr)	_r->a1 = 0
-
-#if defined(CONFIG_SUN3) || defined(CONFIG_COLDFIRE)
-#define ELF_EXEC_PAGESIZE	8192
-#else
-#define ELF_EXEC_PAGESIZE	4096
-#endif
-
-/* This is the location that an ET_DYN program is loaded if exec'ed.  Typical
-   use of this is to invoke "./ld.so someprog" to test out a new version of
-   the loader.  We need to make sure that it is out of the way of the program
-   that it will "exec", and that there is sufficient room for the brk.  */
-
-#ifndef CONFIG_SUN3
-#define ELF_ET_DYN_BASE         0xD0000000UL
-#else
-#define ELF_ET_DYN_BASE         0x0D800000UL
-#endif
-
-#define ELF_CORE_COPY_REGS(pr_reg, regs)				\
-	/* Bleech. */							\
-	pr_reg[0] = regs->d1;						\
-	pr_reg[1] = regs->d2;						\
-	pr_reg[2] = regs->d3;						\
-	pr_reg[3] = regs->d4;						\
-	pr_reg[4] = regs->d5;						\
-	pr_reg[7] = regs->a0;						\
-	pr_reg[8] = regs->a1;						\
-	pr_reg[9] = regs->a2;						\
-	pr_reg[14] = regs->d0;						\
-	pr_reg[15] = rdusp();						\
-	pr_reg[16] = regs->orig_d0;					\
-	pr_reg[17] = regs->sr;						\
-	pr_reg[18] = regs->pc;						\
-	pr_reg[19] = (regs->format << 12) | regs->vector;		\
-	{								\
-	  struct switch_stack *sw = ((struct switch_stack *)regs) - 1;	\
-	  pr_reg[5] = sw->d6;						\
-	  pr_reg[6] = sw->d7;						\
-	  pr_reg[10] = sw->a3;						\
-	  pr_reg[11] = sw->a4;						\
-	  pr_reg[12] = sw->a5;						\
-	  pr_reg[13] = sw->a6;						\
-	}
-
-/* This yields a mask that user programs can use to figure out what
-   instruction set this cpu supports.  */
-
-#define ELF_HWCAP	(0)
-
-/* This yields a string that ld.so will use to load implementation
-   specific libraries for optimization.  This is more specific in
-   intent than poking at uname or /proc/cpuinfo.  */
-
-#define ELF_PLATFORM  (NULL)
-
-#define SET_PERSONALITY(ex) set_personality(PER_LINUX)
-
-#endif
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/emergency-restart.h b/ANDROID_3.4.5/arch/m68k/include/asm/emergency-restart.h
deleted file mode 100644
index 108d8c48..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/emergency-restart.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _ASM_EMERGENCY_RESTART_H
-#define _ASM_EMERGENCY_RESTART_H
-
-#include <asm-generic/emergency-restart.h>
-
-#endif /* _ASM_EMERGENCY_RESTART_H */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/entry.h b/ANDROID_3.4.5/arch/m68k/include/asm/entry.h
deleted file mode 100644
index 622138dc..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/entry.h
+++ /dev/null
@@ -1,262 +0,0 @@
-#ifndef __M68K_ENTRY_H
-#define __M68K_ENTRY_H
-
-#include <asm/setup.h>
-#include <asm/page.h>
-#ifdef __ASSEMBLY__
-#include <asm/thread_info.h>
-#endif
-
-/*
- * Stack layout in 'ret_from_exception':
- *
- *	This allows access to the syscall arguments in registers d1-d5
- *
- *	 0(sp) - d1
- *	 4(sp) - d2
- *	 8(sp) - d3
- *	 C(sp) - d4
- *	10(sp) - d5
- *	14(sp) - a0
- *	18(sp) - a1
- *	1C(sp) - a2
- *	20(sp) - d0
- *	24(sp) - orig_d0
- *	28(sp) - stack adjustment
- *	2C(sp) - [ sr              ] [ format & vector ]
- *	2E(sp) - [ pc-hiword       ] [ sr              ]
- *	30(sp) - [ pc-loword       ] [ pc-hiword       ]
- *	32(sp) - [ format & vector ] [ pc-loword       ]
- *		  ^^^^^^^^^^^^^^^^^   ^^^^^^^^^^^^^^^^^
- *			M68K		  COLDFIRE
- */
-
-/* the following macro is used when enabling interrupts */
-#if defined(MACH_ATARI_ONLY)
-	/* block out HSYNC on the atari */
-#define ALLOWINT	(~0x400)
-#define	MAX_NOINT_IPL	3
-#else
-	/* portable version */
-#define ALLOWINT	(~0x700)
-#define	MAX_NOINT_IPL	0
-#endif /* machine compilation types */
-
-#ifdef __ASSEMBLY__
-/*
- * This defines the normal kernel pt-regs layout.
- *
- * regs a3-a6 and d6-d7 are preserved by C code
- * the kernel doesn't mess with usp unless it needs to
- */
-#define SWITCH_STACK_SIZE	(6*4+4)	/* includes return address */
-
-#ifdef CONFIG_COLDFIRE
-#ifdef CONFIG_COLDFIRE_SW_A7
-/*
- * This is made a little more tricky on older ColdFires. There is no
- * separate supervisor and user stack pointers. Need to artificially
- * construct a usp in software... When doing this we need to disable
- * interrupts, otherwise bad things will happen.
- */
-.globl sw_usp
-.globl sw_ksp
-
-.macro SAVE_ALL_SYS
-	move	#0x2700,%sr		/* disable intrs */
-	btst	#5,%sp@(2)		/* from user? */
-	bnes	6f			/* no, skip */
-	movel	%sp,sw_usp		/* save user sp */
-	addql	#8,sw_usp		/* remove exception */
-	movel	sw_ksp,%sp		/* kernel sp */
-	subql	#8,%sp			/* room for exception */
-	clrl	%sp@-			/* stkadj */
-	movel	%d0,%sp@-		/* orig d0 */
-	movel	%d0,%sp@-		/* d0 */
-	lea	%sp@(-32),%sp		/* space for 8 regs */
-	moveml	%d1-%d5/%a0-%a2,%sp@
-	movel	sw_usp,%a0		/* get usp */
-	movel	%a0@-,%sp@(PT_OFF_PC)	/* copy exception program counter */
-	movel	%a0@-,%sp@(PT_OFF_FORMATVEC)/*copy exception format/vector/sr */
-	bra	7f
-	6:
-	clrl	%sp@-			/* stkadj */
-	movel	%d0,%sp@-		/* orig d0 */
-	movel	%d0,%sp@-		/* d0 */
-	lea	%sp@(-32),%sp		/* space for 8 regs */
-	moveml	%d1-%d5/%a0-%a2,%sp@
-	7:
-.endm
-
-.macro SAVE_ALL_INT
-	SAVE_ALL_SYS
-	moveq	#-1,%d0			/* not system call entry */
-	movel	%d0,%sp@(PT_OFF_ORIG_D0)
-.endm
-
-.macro RESTORE_USER
-	move	#0x2700,%sr		/* disable intrs */
-	movel	sw_usp,%a0		/* get usp */
-	movel	%sp@(PT_OFF_PC),%a0@-	/* copy exception program counter */
-	movel	%sp@(PT_OFF_FORMATVEC),%a0@-/*copy exception format/vector/sr */
-	moveml	%sp@,%d1-%d5/%a0-%a2
-	lea	%sp@(32),%sp		/* space for 8 regs */
-	movel	%sp@+,%d0
-	addql	#4,%sp			/* orig d0 */
-	addl	%sp@+,%sp		/* stkadj */
-	addql	#8,%sp			/* remove exception */
-	movel	%sp,sw_ksp		/* save ksp */
-	subql	#8,sw_usp		/* set exception */
-	movel	sw_usp,%sp		/* restore usp */
-	rte
-.endm
-
-.macro RDUSP
-	movel	sw_usp,%a3
-.endm
-
-.macro WRUSP
-	movel	%a3,sw_usp
-.endm
-
-#else /* !CONFIG_COLDFIRE_SW_A7 */
-/*
- * Modern ColdFire parts have separate supervisor and user stack
- * pointers. Simple load and restore macros for this case.
- */
-.macro SAVE_ALL_SYS
-	move	#0x2700,%sr		/* disable intrs */
-	clrl	%sp@-			/* stkadj */
-	movel	%d0,%sp@-		/* orig d0 */
-	movel	%d0,%sp@-		/* d0 */
-	lea	%sp@(-32),%sp		/* space for 8 regs */
-	moveml	%d1-%d5/%a0-%a2,%sp@
-.endm
-
-.macro SAVE_ALL_INT
-	move	#0x2700,%sr		/* disable intrs */
-	clrl	%sp@-			/* stkadj */
-	pea	-1:w			/* orig d0 */
-	movel	%d0,%sp@-		/* d0 */
-	lea	%sp@(-32),%sp		/* space for 8 regs */
-	moveml	%d1-%d5/%a0-%a2,%sp@
-.endm
-
-.macro RESTORE_USER
-	moveml	%sp@,%d1-%d5/%a0-%a2
-	lea	%sp@(32),%sp		/* space for 8 regs */
-	movel	%sp@+,%d0
-	addql	#4,%sp			/* orig d0 */
-	addl	%sp@+,%sp		/* stkadj */
-	rte
-.endm
-
-.macro RDUSP
-	/*move	%usp,%a3*/
-	.word	0x4e6b
-.endm
-
-.macro WRUSP
-	/*move	%a3,%usp*/
-	.word	0x4e63
-.endm
-
-#endif /* !CONFIG_COLDFIRE_SW_A7 */
-
-.macro SAVE_SWITCH_STACK
-	lea	%sp@(-24),%sp		/* 6 regs */
-	moveml	%a3-%a6/%d6-%d7,%sp@
-.endm
-
-.macro RESTORE_SWITCH_STACK
-	moveml	%sp@,%a3-%a6/%d6-%d7
-	lea	%sp@(24),%sp		/* 6 regs */
-.endm
-
-#else /* !CONFIG_COLDFIRE */
-
-/*
- * All other types of m68k parts (68000, 680x0, CPU32) have the same
- * entry and exit code.
- */
-
-/*
- * a -1 in the orig_d0 field signifies
- * that the stack frame is NOT for syscall
- */
-.macro SAVE_ALL_INT
-	clrl	%sp@-			/* stk_adj */
-	pea	-1:w			/* orig d0 */
-	movel	%d0,%sp@-		/* d0 */
-	moveml	%d1-%d5/%a0-%a2,%sp@-
-.endm
-
-.macro SAVE_ALL_SYS
-	clrl	%sp@-			/* stk_adj */
-	movel	%d0,%sp@-		/* orig d0 */
-	movel	%d0,%sp@-		/* d0 */
-	moveml	%d1-%d5/%a0-%a2,%sp@-
-.endm
-
-.macro RESTORE_ALL
-	moveml	%sp@+,%a0-%a2/%d1-%d5
-	movel	%sp@+,%d0
-	addql	#4,%sp			/* orig d0 */
-	addl	%sp@+,%sp		/* stk adj */
-	rte
-.endm
-
-
-.macro SAVE_SWITCH_STACK
-	moveml	%a3-%a6/%d6-%d7,%sp@-
-.endm
-
-.macro RESTORE_SWITCH_STACK
-	moveml	%sp@+,%a3-%a6/%d6-%d7
-.endm
-
-#endif /* !CONFIG_COLDFIRE */
-
-/*
- * Register %a2 is reserved and set to current task on MMU enabled systems.
- * Non-MMU systems do not reserve %a2 in this way, and this definition is
- * not used for them.
- */
-#ifdef CONFIG_MMU
-
-#define curptr a2
-
-#define GET_CURRENT(tmp) get_current tmp
-.macro get_current reg=%d0
-	movel	%sp,\reg
-	andl	#-THREAD_SIZE,\reg
-	movel	\reg,%curptr
-	movel	%curptr@,%curptr
-.endm
-
-#else
-
-#define GET_CURRENT(tmp)
-
-#endif /* CONFIG_MMU */
-
-#else /* C source */
-
-#define STR(X) STR1(X)
-#define STR1(X) #X
-
-#define SAVE_ALL_INT				\
-	"clrl	%%sp@-;"    /* stk_adj */	\
-	"pea	-1:w;"	    /* orig d0 = -1 */	\
-	"movel	%%d0,%%sp@-;" /* d0 */		\
-	"moveml	%%d1-%%d5/%%a0-%%a2,%%sp@-"
-
-#define GET_CURRENT(tmp) \
-	"movel	%%sp,"#tmp"\n\t" \
-	"andw	#-"STR(THREAD_SIZE)","#tmp"\n\t" \
-	"movel	"#tmp",%%a2\n\t" \
-	"movel	%%a2@,%%a2"
-
-#endif
-
-#endif /* __M68K_ENTRY_H */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/errno.h b/ANDROID_3.4.5/arch/m68k/include/asm/errno.h
deleted file mode 100644
index 0d4e188d..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/errno.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _M68K_ERRNO_H
-#define _M68K_ERRNO_H
-
-#include <asm-generic/errno.h>
-
-#endif /* _M68K_ERRNO_H */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/exec.h b/ANDROID_3.4.5/arch/m68k/include/asm/exec.h
deleted file mode 100644
index 0499adf9..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/exec.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _M68K_EXEC_H
-#define _M68K_EXEC_H
-
-#define arch_align_stack(x) (x)
-
-#endif /* _M68K_EXEC_H */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/fb.h b/ANDROID_3.4.5/arch/m68k/include/asm/fb.h
deleted file mode 100644
index be4e4c67..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/fb.h
+++ /dev/null
@@ -1,38 +0,0 @@
-#ifndef _ASM_FB_H_
-#define _ASM_FB_H_
-
-#include <linux/fb.h>
-#include <linux/fs.h>
-#include <asm/page.h>
-#include <asm/setup.h>
-
-#ifdef CONFIG_MMU
-#ifdef CONFIG_SUN3
-static inline void fb_pgprotect(struct file *file, struct vm_area_struct *vma,
-				unsigned long off)
-{
-	pgprot_val(vma->vm_page_prot) |= SUN3_PAGE_NOCACHE;
-}
-#else
-static inline void fb_pgprotect(struct file *file, struct vm_area_struct *vma,
-				unsigned long off)
-{
-	if (CPU_IS_020_OR_030)
-		pgprot_val(vma->vm_page_prot) |= _PAGE_NOCACHE030;
-	if (CPU_IS_040_OR_060) {
-		pgprot_val(vma->vm_page_prot) &= _CACHEMASK040;
-		/* Use no-cache mode, serialized */
-		pgprot_val(vma->vm_page_prot) |= _PAGE_NOCACHE_S;
-	}
-}
-#endif /* CONFIG_SUN3 */
-#else
-#define fb_pgprotect(...) do {} while (0)
-#endif /* CONFIG_MMU */
-
-static inline int fb_is_primary_device(struct fb_info *info)
-{
-	return 0;
-}
-
-#endif /* _ASM_FB_H_ */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/fbio.h b/ANDROID_3.4.5/arch/m68k/include/asm/fbio.h
deleted file mode 100644
index 0a21da87..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/fbio.h
+++ /dev/null
@@ -1,330 +0,0 @@
-#ifndef __LINUX_FBIO_H
-#define __LINUX_FBIO_H
-
-#include <linux/compiler.h>
-#include <linux/types.h>
-
-/* Constants used for fbio SunOS compatibility */
-/* (C) 1996 Miguel de Icaza */
-
-/* Frame buffer types */
-#define FBTYPE_NOTYPE           -1
-#define FBTYPE_SUN1BW           0   /* mono */
-#define FBTYPE_SUN1COLOR        1 
-#define FBTYPE_SUN2BW           2 
-#define FBTYPE_SUN2COLOR        3 
-#define FBTYPE_SUN2GP           4 
-#define FBTYPE_SUN5COLOR        5 
-#define FBTYPE_SUN3COLOR        6 
-#define FBTYPE_MEMCOLOR         7 
-#define FBTYPE_SUN4COLOR        8 
- 
-#define FBTYPE_NOTSUN1          9 
-#define FBTYPE_NOTSUN2          10
-#define FBTYPE_NOTSUN3          11
- 
-#define FBTYPE_SUNFAST_COLOR    12  /* cg6 */
-#define FBTYPE_SUNROP_COLOR     13
-#define FBTYPE_SUNFB_VIDEO      14
-#define FBTYPE_SUNGIFB          15
-#define FBTYPE_SUNGPLAS         16
-#define FBTYPE_SUNGP3           17
-#define FBTYPE_SUNGT            18
-#define FBTYPE_SUNLEO           19      /* zx Leo card */
-#define FBTYPE_MDICOLOR         20      /* cg14 */
-#define FBTYPE_TCXCOLOR		21	/* SUNW,tcx card */
-
-#define FBTYPE_LASTPLUSONE      21	/* This is not last + 1 in fact... */
-
-/* Does not seem to be listed in the Sun file either */
-#define FBTYPE_CREATOR          22
-#define FBTYPE_PCI_IGA1682	23
-#define FBTYPE_P9100COLOR	24
-
-#define FBTYPE_PCI_GENERIC	1000
-#define FBTYPE_PCI_MACH64	1001
-
-/* fbio ioctls */
-/* Returned by FBIOGTYPE */
-struct  fbtype {
-        int     fb_type;        /* fb type, see above */
-        int     fb_height;      /* pixels */
-        int     fb_width;       /* pixels */
-        int     fb_depth;
-        int     fb_cmsize;      /* color map entries */
-        int     fb_size;        /* fb size in bytes */
-};
-#define FBIOGTYPE _IOR('F', 0, struct fbtype)
-
-struct  fbcmap {
-        int             index;          /* first element (0 origin) */
-        int             count;
-        unsigned char   __user *red;
-        unsigned char   __user *green;
-        unsigned char   __user *blue;
-};
-
-#ifdef __KERNEL__
-#define FBIOPUTCMAP_SPARC _IOW('F', 3, struct fbcmap)
-#define FBIOGETCMAP_SPARC _IOW('F', 4, struct fbcmap)
-#else
-#define FBIOPUTCMAP _IOW('F', 3, struct fbcmap)
-#define FBIOGETCMAP _IOW('F', 4, struct fbcmap)
-#endif
-
-/* # of device specific values */
-#define FB_ATTR_NDEVSPECIFIC    8
-/* # of possible emulations */
-#define FB_ATTR_NEMUTYPES       4
- 
-struct fbsattr {
-        int     flags;
-        int     emu_type;	/* -1 if none */
-        int     dev_specific[FB_ATTR_NDEVSPECIFIC];
-};
- 
-struct fbgattr {
-        int     real_type;	/* real frame buffer type */
-        int     owner;		/* unknown */
-        struct fbtype fbtype;	/* real frame buffer fbtype */
-        struct fbsattr sattr;   
-        int     emu_types[FB_ATTR_NEMUTYPES]; /* supported emulations */
-};
-#define FBIOSATTR  _IOW('F', 5, struct fbgattr) /* Unsupported: */
-#define FBIOGATTR  _IOR('F', 6, struct fbgattr)	/* supported */
-
-#define FBIOSVIDEO _IOW('F', 7, int)
-#define FBIOGVIDEO _IOR('F', 8, int)
-
-struct fbcursor {
-        short set;              /* what to set, choose from the list above */
-        short enable;           /* cursor on/off */
-        struct fbcurpos pos;    /* cursor position */
-        struct fbcurpos hot;    /* cursor hot spot */
-        struct fbcmap cmap;     /* color map info */
-        struct fbcurpos size;   /* cursor bit map size */
-        char __user *image;     /* cursor image bits */
-        char __user *mask;      /* cursor mask bits */
-};
-
-/* set/get cursor attributes/shape */
-#define FBIOSCURSOR     _IOW('F', 24, struct fbcursor)
-#define FBIOGCURSOR     _IOWR('F', 25, struct fbcursor)
- 
-/* set/get cursor position */
-#define FBIOSCURPOS     _IOW('F', 26, struct fbcurpos)
-#define FBIOGCURPOS     _IOW('F', 27, struct fbcurpos)
- 
-/* get max cursor size */
-#define FBIOGCURMAX     _IOR('F', 28, struct fbcurpos)
-
-/* wid manipulation */
-struct fb_wid_alloc {
-#define FB_WID_SHARED_8		0
-#define FB_WID_SHARED_24	1
-#define FB_WID_DBL_8		2
-#define FB_WID_DBL_24		3
-	__u32	wa_type;
-	__s32	wa_index;	/* Set on return */
-	__u32	wa_count;	
-};
-struct fb_wid_item {
-	__u32	wi_type;
-	__s32	wi_index;
-	__u32	wi_attrs;
-	__u32	wi_values[32];
-};
-struct fb_wid_list {
-	__u32	wl_flags;
-	__u32	wl_count;
-	struct fb_wid_item	*wl_list;
-};
-
-#define FBIO_WID_ALLOC	_IOWR('F', 30, struct fb_wid_alloc)
-#define FBIO_WID_FREE	_IOW('F', 31, struct fb_wid_alloc)
-#define FBIO_WID_PUT	_IOW('F', 32, struct fb_wid_list)
-#define FBIO_WID_GET	_IOWR('F', 33, struct fb_wid_list)
-
-/* Creator ioctls */
-#define FFB_IOCTL	('F'<<8)
-#define FFB_SYS_INFO		(FFB_IOCTL|80)
-#define FFB_CLUTREAD		(FFB_IOCTL|81)
-#define FFB_CLUTPOST		(FFB_IOCTL|82)
-#define FFB_SETDIAGMODE		(FFB_IOCTL|83)
-#define FFB_GETMONITORID	(FFB_IOCTL|84)
-#define FFB_GETVIDEOMODE	(FFB_IOCTL|85)
-#define FFB_SETVIDEOMODE	(FFB_IOCTL|86)
-#define FFB_SETSERVER		(FFB_IOCTL|87)
-#define FFB_SETOVCTL		(FFB_IOCTL|88)
-#define FFB_GETOVCTL		(FFB_IOCTL|89)
-#define FFB_GETSAXNUM		(FFB_IOCTL|90)
-#define FFB_FBDEBUG		(FFB_IOCTL|91)
-
-/* Cg14 ioctls */
-#define MDI_IOCTL          ('M'<<8)
-#define MDI_RESET          (MDI_IOCTL|1)
-#define MDI_GET_CFGINFO    (MDI_IOCTL|2)
-#define MDI_SET_PIXELMODE  (MDI_IOCTL|3)
-#    define MDI_32_PIX     32
-#    define MDI_16_PIX     16
-#    define MDI_8_PIX      8
-
-struct mdi_cfginfo {
-	int     mdi_ncluts;     /* Number of implemented CLUTs in this MDI */
-        int     mdi_type;       /* FBTYPE name */
-        int     mdi_height;     /* height */
-        int     mdi_width;      /* width */
-        int     mdi_size;       /* available ram */
-        int     mdi_mode;       /* 8bpp, 16bpp or 32bpp */
-        int     mdi_pixfreq;    /* pixel clock (from PROM) */
-};
-
-/* SparcLinux specific ioctl for the MDI, should be replaced for
- * the SET_XLUT/SET_CLUTn ioctls instead
- */
-#define MDI_CLEAR_XLUT       (MDI_IOCTL|9)
-
-/* leo & ffb ioctls */
-struct fb_clut_alloc {
-	__u32	clutid;	/* Set on return */
- 	__u32	flag;
- 	__u32	index;
-};
-
-struct fb_clut {
-#define FB_CLUT_WAIT	0x00000001	/* Not yet implemented */
- 	__u32	flag;
- 	__u32	clutid;
- 	__u32	offset;
- 	__u32	count;
- 	char *	red;
- 	char *	green;
- 	char *	blue;
-};
-
-struct fb_clut32 {
- 	__u32	flag;
- 	__u32	clutid;
- 	__u32	offset;
- 	__u32	count;
- 	__u32	red;
- 	__u32	green;
- 	__u32	blue;
-};
-
-#define LEO_CLUTALLOC	_IOWR('L', 53, struct fb_clut_alloc)
-#define LEO_CLUTFREE	_IOW('L', 54, struct fb_clut_alloc)
-#define LEO_CLUTREAD	_IOW('L', 55, struct fb_clut)
-#define LEO_CLUTPOST	_IOW('L', 56, struct fb_clut)
-#define LEO_SETGAMMA	_IOW('L', 68, int) /* Not yet implemented */
-#define LEO_GETGAMMA	_IOR('L', 69, int) /* Not yet implemented */
-
-#ifdef __KERNEL__
-/* Addresses on the fd of a cgsix that are mappable */
-#define CG6_FBC    0x70000000
-#define CG6_TEC    0x70001000
-#define CG6_BTREGS 0x70002000
-#define CG6_FHC    0x70004000
-#define CG6_THC    0x70005000
-#define CG6_ROM    0x70006000
-#define CG6_RAM    0x70016000
-#define CG6_DHC    0x80000000
-
-#define CG3_MMAP_OFFSET 0x4000000
-
-/* Addresses on the fd of a tcx that are mappable */
-#define TCX_RAM8BIT   		0x00000000
-#define TCX_RAM24BIT   		0x01000000
-#define TCX_UNK3   		0x10000000
-#define TCX_UNK4   		0x20000000
-#define TCX_CONTROLPLANE   	0x28000000
-#define TCX_UNK6   		0x30000000
-#define TCX_UNK7   		0x38000000
-#define TCX_TEC    		0x70000000
-#define TCX_BTREGS 		0x70002000
-#define TCX_THC    		0x70004000
-#define TCX_DHC    		0x70008000
-#define TCX_ALT	   		0x7000a000
-#define TCX_SYNC   		0x7000e000
-#define TCX_UNK2    		0x70010000
-
-/* CG14 definitions */
-
-/* Offsets into the OBIO space: */
-#define CG14_REGS        0       /* registers */
-#define CG14_CURSORREGS  0x1000  /* cursor registers */
-#define CG14_DACREGS     0x2000  /* DAC registers */
-#define CG14_XLUT        0x3000  /* X Look Up Table -- ??? */
-#define CG14_CLUT1       0x4000  /* Color Look Up Table */
-#define CG14_CLUT2       0x5000  /* Color Look Up Table */
-#define CG14_CLUT3       0x6000  /* Color Look Up Table */
-#define CG14_AUTO	 0xf000
-
-#endif /* KERNEL */
-
-/* These are exported to userland for applications to use */
-/* Mappable offsets for the cg14: control registers */
-#define MDI_DIRECT_MAP 0x10000000
-#define MDI_CTLREG_MAP 0x20000000
-#define MDI_CURSOR_MAP 0x30000000
-#define MDI_SHDW_VRT_MAP 0x40000000
-
-/* Mappable offsets for the cg14: frame buffer resolutions */
-/* 32 bits */
-#define MDI_CHUNKY_XBGR_MAP 0x50000000
-#define MDI_CHUNKY_BGR_MAP 0x60000000
-
-/* 16 bits */
-#define MDI_PLANAR_X16_MAP 0x70000000
-#define MDI_PLANAR_C16_MAP 0x80000000
-
-/* 8 bit is done as CG3 MMAP offset */
-/* 32 bits, planar */
-#define MDI_PLANAR_X32_MAP 0x90000000
-#define MDI_PLANAR_B32_MAP 0xa0000000
-#define MDI_PLANAR_G32_MAP 0xb0000000
-#define MDI_PLANAR_R32_MAP 0xc0000000
-
-/* Mappable offsets on leo */
-#define LEO_SS0_MAP            0x00000000
-#define LEO_LC_SS0_USR_MAP     0x00800000
-#define LEO_LD_SS0_MAP         0x00801000
-#define LEO_LX_CURSOR_MAP      0x00802000
-#define LEO_SS1_MAP            0x00803000
-#define LEO_LC_SS1_USR_MAP     0x01003000
-#define LEO_LD_SS1_MAP         0x01004000
-#define LEO_UNK_MAP            0x01005000
-#define LEO_LX_KRN_MAP         0x01006000
-#define LEO_LC_SS0_KRN_MAP     0x01007000
-#define LEO_LC_SS1_KRN_MAP     0x01008000
-#define LEO_LD_GBL_MAP         0x01009000
-#define LEO_UNK2_MAP           0x0100a000
-
-#ifdef __KERNEL__
-struct  fbcmap32 {
-	int             index;          /* first element (0 origin) */
-	int             count;
-	u32		red;
-	u32		green;
-	u32		blue;
-};
-
-#define FBIOPUTCMAP32	_IOW('F', 3, struct fbcmap32)
-#define FBIOGETCMAP32	_IOW('F', 4, struct fbcmap32)
-
-struct fbcursor32 {
-	short set;		/* what to set, choose from the list above */
-	short enable;		/* cursor on/off */
-	struct fbcurpos pos;	/* cursor position */
-	struct fbcurpos hot;	/* cursor hot spot */
-	struct fbcmap32 cmap;	/* color map info */
-	struct fbcurpos size;	/* cursor bit map size */
-	u32	image;		/* cursor image bits */
-	u32	mask;		/* cursor mask bits */
-};
-
-#define FBIOSCURSOR32	_IOW('F', 24, struct fbcursor32)
-#define FBIOGCURSOR32	_IOW('F', 25, struct fbcursor32)
-#endif
-
-#endif /* __LINUX_FBIO_H */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/fcntl.h b/ANDROID_3.4.5/arch/m68k/include/asm/fcntl.h
deleted file mode 100644
index 1c369b20..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/fcntl.h
+++ /dev/null
@@ -1,11 +0,0 @@
-#ifndef _M68K_FCNTL_H
-#define _M68K_FCNTL_H
-
-#define O_DIRECTORY	040000	/* must be a directory */
-#define O_NOFOLLOW	0100000	/* don't follow links */
-#define O_DIRECT	0200000	/* direct disk access hint - currently ignored */
-#define O_LARGEFILE	0400000
-
-#include <asm-generic/fcntl.h>
-
-#endif /* _M68K_FCNTL_H */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/flat.h b/ANDROID_3.4.5/arch/m68k/include/asm/flat.h
deleted file mode 100644
index a0e29079..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/flat.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * include/asm-m68knommu/flat.h -- uClinux flat-format executables
- */
-
-#ifndef __M68KNOMMU_FLAT_H__
-#define __M68KNOMMU_FLAT_H__
-
-#define	flat_argvp_envp_on_stack()		1
-#define	flat_old_ram_flag(flags)		(flags)
-#define	flat_reloc_valid(reloc, size)		((reloc) <= (size))
-#define	flat_get_addr_from_rp(rp, relval, flags, p)	get_unaligned(rp)
-#define	flat_put_addr_at_rp(rp, val, relval)	put_unaligned(val,rp)
-#define	flat_get_relocate_addr(rel)		(rel)
-#define	flat_set_persistent(relval, p)		0
-
-#endif /* __M68KNOMMU_FLAT_H__ */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/floppy.h b/ANDROID_3.4.5/arch/m68k/include/asm/floppy.h
deleted file mode 100644
index 697d5039..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/floppy.h
+++ /dev/null
@@ -1,254 +0,0 @@
-/*
- * Implementation independent bits of the Floppy driver.
- *
- * much of this file is derived from what was originally the Q40 floppy driver.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1999, 2000, 2001
- *
- * Sun3x support added 2/4/2000 Sam Creasey (sammy@sammy.net)
- *
- */
-
-#include <asm/io.h>
-
-#include <linux/vmalloc.h>
-
-asmlinkage irqreturn_t floppy_hardint(int irq, void *dev_id);
-
-/* constants... */
-
-#undef MAX_DMA_ADDRESS
-#define MAX_DMA_ADDRESS   0x00  /* nothing like that */
-
-
-/*
- * Again, the CMOS information doesn't work on m68k..
- */
-#define FLOPPY0_TYPE (MACH_IS_Q40 ? 6 : 4)
-#define FLOPPY1_TYPE 0
-
-/* basically PC init + set use_virtual_dma */
-#define  FDC1 m68k_floppy_init()
-
-#define N_FDC 1
-#define N_DRIVE 8
-
-
-/* vdma globals adapted from asm-i386/floppy.h */
-
-static int virtual_dma_count=0;
-static int virtual_dma_residue=0;
-static char *virtual_dma_addr=NULL;
-static int virtual_dma_mode=0;
-static int doing_pdma=0;
-
-#include <asm/sun3xflop.h>
-
-extern spinlock_t  dma_spin_lock;
-
-static __inline__ unsigned long claim_dma_lock(void)
-{
-	unsigned long flags;
-	spin_lock_irqsave(&dma_spin_lock, flags);
-	return flags;
-}
-
-static __inline__ void release_dma_lock(unsigned long flags)
-{
-	spin_unlock_irqrestore(&dma_spin_lock, flags);
-}
-
-
-static __inline__ unsigned char fd_inb(int port)
-{
-	if(MACH_IS_Q40)
-		return inb_p(port);
-	else if(MACH_IS_SUN3X)
-		return sun3x_82072_fd_inb(port);
-	return 0;
-}
-
-static __inline__ void fd_outb(unsigned char value, int port)
-{
-	if(MACH_IS_Q40)
-		outb_p(value, port);
-	else if(MACH_IS_SUN3X)
-		sun3x_82072_fd_outb(value, port);
-}
-
-
-static int fd_request_irq(void)
-{
-	if(MACH_IS_Q40)
-		return request_irq(FLOPPY_IRQ, floppy_hardint,
-				   IRQF_DISABLED, "floppy", floppy_hardint);
-	else if(MACH_IS_SUN3X)
-		return sun3xflop_request_irq();
-	return -ENXIO;
-}
-
-static void fd_free_irq(void)
-{
-	if(MACH_IS_Q40)
-		free_irq(FLOPPY_IRQ, floppy_hardint);
-}
-
-#define fd_request_dma()        vdma_request_dma(FLOPPY_DMA,"floppy")
-#define fd_get_dma_residue()    vdma_get_dma_residue(FLOPPY_DMA)
-#define fd_dma_mem_alloc(size)	vdma_mem_alloc(size)
-#define fd_dma_setup(addr, size, mode, io) vdma_dma_setup(addr, size, mode, io)
-
-#define fd_enable_irq()           /* nothing... */
-#define fd_disable_irq()          /* nothing... */
-
-#define fd_free_dma()             /* nothing */
-
-/* No 64k boundary crossing problems on Q40 - no DMA at all */
-#define CROSS_64KB(a,s) (0)
-
-#define DMA_MODE_READ  0x44    /* i386 look-alike */
-#define DMA_MODE_WRITE 0x48
-
-
-static int m68k_floppy_init(void)
-{
-  use_virtual_dma =1;
-  can_use_virtual_dma = 1;
-
-
-  if (MACH_IS_Q40)
-	  return 0x3f0;
-  else if(MACH_IS_SUN3X)
-	  return sun3xflop_init();
-  else
-    return -1;
-}
-
-
-static int vdma_request_dma(unsigned int dmanr, const char * device_id)
-{
-	return 0;
-}
-
-
-static int vdma_get_dma_residue(unsigned int dummy)
-{
-	return virtual_dma_count + virtual_dma_residue;
-}
-
-
-static unsigned long vdma_mem_alloc(unsigned long size)
-{
-	return (unsigned long) vmalloc(size);
-
-}
-
-static void _fd_dma_mem_free(unsigned long addr, unsigned long size)
-{
-        vfree((void *)addr);
-}
-#define fd_dma_mem_free(addr,size) _fd_dma_mem_free(addr, size)
-
-
-/* choose_dma_mode ???*/
-
-static int vdma_dma_setup(char *addr, unsigned long size, int mode, int io)
-{
-	doing_pdma = 1;
-	virtual_dma_port = (MACH_IS_Q40 ? io : 0);
-	virtual_dma_mode = (mode  == DMA_MODE_WRITE);
-	virtual_dma_addr = addr;
-	virtual_dma_count = size;
-	virtual_dma_residue = 0;
-	return 0;
-}
-
-
-
-static void fd_disable_dma(void)
-{
-	doing_pdma = 0;
-	virtual_dma_residue += virtual_dma_count;
-	virtual_dma_count=0;
-}
-
-
-
-/* this is the only truly Q40 specific function */
-
-asmlinkage irqreturn_t floppy_hardint(int irq, void *dev_id)
-{
-	register unsigned char st;
-
-#undef TRACE_FLPY_INT
-#define NO_FLOPPY_ASSEMBLER
-
-#ifdef TRACE_FLPY_INT
-	static int calls=0;
-	static int bytes=0;
-	static int dma_wait=0;
-#endif
-	if(!doing_pdma) {
-		floppy_interrupt(irq, dev_id);
-		return IRQ_HANDLED;
-	}
-
-#ifdef TRACE_FLPY_INT
-	if(!calls)
-		bytes = virtual_dma_count;
-#endif
-
-	{
-		register int lcount;
-		register char *lptr;
-
-		/* serve 1st byte fast: */
-
-		st=1;
-		for(lcount=virtual_dma_count, lptr=virtual_dma_addr;
-		    lcount; lcount--, lptr++) {
-			st=inb(virtual_dma_port+4) & 0xa0 ;
-			if(st != 0xa0)
-				break;
-			if(virtual_dma_mode)
-				outb_p(*lptr, virtual_dma_port+5);
-			else
-				*lptr = inb_p(virtual_dma_port+5);
-		}
-
-		virtual_dma_count = lcount;
-		virtual_dma_addr = lptr;
-		st = inb(virtual_dma_port+4);
-	}
-
-#ifdef TRACE_FLPY_INT
-	calls++;
-#endif
-	if(st == 0x20)
-		return IRQ_HANDLED;
-	if(!(st & 0x20)) {
-		virtual_dma_residue += virtual_dma_count;
-		virtual_dma_count=0;
-#ifdef TRACE_FLPY_INT
-		printk("count=%x, residue=%x calls=%d bytes=%d dma_wait=%d\n",
-		       virtual_dma_count, virtual_dma_residue, calls, bytes,
-		       dma_wait);
-		calls = 0;
-		dma_wait=0;
-#endif
-		doing_pdma = 0;
-		floppy_interrupt(irq, dev_id);
-		return IRQ_HANDLED;
-	}
-#ifdef TRACE_FLPY_INT
-	if(!virtual_dma_count)
-		dma_wait++;
-#endif
-	return IRQ_HANDLED;
-}
-
-#define EXTRA_FLOPPY_PARAMS
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/fpu.h b/ANDROID_3.4.5/arch/m68k/include/asm/fpu.h
deleted file mode 100644
index 526db9da..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/fpu.h
+++ /dev/null
@@ -1,23 +0,0 @@
-#ifndef __M68K_FPU_H
-#define __M68K_FPU_H
-
-
-/*
- * MAX floating point unit state size (FSAVE/FRESTORE)
- */
-
-#if defined(CONFIG_M68020) || defined(CONFIG_M68030)
-#define FPSTATESIZE (216)
-#elif defined(CONFIG_M68040)
-#define FPSTATESIZE (96)
-#elif defined(CONFIG_M68KFPU_EMU)
-#define FPSTATESIZE (28)
-#elif defined(CONFIG_COLDFIRE) && defined(CONFIG_MMU)
-#define FPSTATESIZE (16)
-#elif defined(CONFIG_M68060)
-#define FPSTATESIZE (12)
-#else
-#define FPSTATESIZE (0)
-#endif
-
-#endif /* __M68K_FPU_H */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/ftrace.h b/ANDROID_3.4.5/arch/m68k/include/asm/ftrace.h
deleted file mode 100644
index 40a8c178..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/ftrace.h
+++ /dev/null
@@ -1 +0,0 @@
-/* empty */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/futex.h b/ANDROID_3.4.5/arch/m68k/include/asm/futex.h
deleted file mode 100644
index 6a332a9f..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/futex.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _ASM_FUTEX_H
-#define _ASM_FUTEX_H
-
-#include <asm-generic/futex.h>
-
-#endif
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/gpio.h b/ANDROID_3.4.5/arch/m68k/include/asm/gpio.h
deleted file mode 100644
index 00d0071d..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/gpio.h
+++ /dev/null
@@ -1,244 +0,0 @@
-/*
- * Coldfire generic GPIO support
- *
- * (C) Copyright 2009, Steven King <sfking@fdwdc.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
-*/
-
-#ifndef coldfire_gpio_h
-#define coldfire_gpio_h
-
-#include <linux/io.h>
-#include <asm-generic/gpio.h>
-#include <asm/coldfire.h>
-#include <asm/mcfsim.h>
-
-/*
- * The Freescale Coldfire family is quite varied in how they implement GPIO.
- * Some parts have 8 bit ports, some have 16bit and some have 32bit; some have
- * only one port, others have multiple ports; some have a single data latch
- * for both input and output, others have a separate pin data register to read
- * input; some require a read-modify-write access to change an output, others
- * have set and clear registers for some of the outputs; Some have all the
- * GPIOs in a single control area, others have some GPIOs implemented in
- * different modules.
- *
- * This implementation attempts accommodate the differences while presenting
- * a generic interface that will optimize to as few instructions as possible.
- */
-#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || \
-    defined(CONFIG_M520x) || defined(CONFIG_M523x) || \
-    defined(CONFIG_M527x) || defined(CONFIG_M528x) || \
-    defined(CONFIG_M532x) || defined(CONFIG_M54xx)
-
-/* These parts have GPIO organized by 8 bit ports */
-
-#define MCFGPIO_PORTTYPE		u8
-#define MCFGPIO_PORTSIZE		8
-#define mcfgpio_read(port)		__raw_readb(port)
-#define mcfgpio_write(data, port)	__raw_writeb(data, port)
-
-#elif defined(CONFIG_M5307) || defined(CONFIG_M5407) || defined(CONFIG_M5272)
-
-/* These parts have GPIO organized by 16 bit ports */
-
-#define MCFGPIO_PORTTYPE		u16
-#define MCFGPIO_PORTSIZE		16
-#define mcfgpio_read(port)		__raw_readw(port)
-#define mcfgpio_write(data, port)	__raw_writew(data, port)
-
-#elif defined(CONFIG_M5249)
-
-/* These parts have GPIO organized by 32 bit ports */
-
-#define MCFGPIO_PORTTYPE		u32
-#define MCFGPIO_PORTSIZE		32
-#define mcfgpio_read(port)		__raw_readl(port)
-#define mcfgpio_write(data, port)	__raw_writel(data, port)
-
-#endif
-
-#define mcfgpio_bit(gpio)		(1 << ((gpio) %  MCFGPIO_PORTSIZE))
-#define mcfgpio_port(gpio)		((gpio) / MCFGPIO_PORTSIZE)
-
-#if defined(CONFIG_M520x) || defined(CONFIG_M523x) || \
-    defined(CONFIG_M527x) || defined(CONFIG_M528x) || defined(CONFIG_M532x)
-/*
- * These parts have an 'Edge' Port module (external interrupt/GPIO) which uses
- * read-modify-write to change an output and a GPIO module which has separate
- * set/clr registers to directly change outputs with a single write access.
- */
-#if defined(CONFIG_M528x)
-/*
- * The 528x also has GPIOs in other modules (GPT, QADC) which use
- * read-modify-write as well as those controlled by the EPORT and GPIO modules.
- */
-#define MCFGPIO_SCR_START		40
-#else
-#define MCFGPIO_SCR_START		8
-#endif
-
-#define MCFGPIO_SETR_PORT(gpio)		(MCFGPIO_SETR + \
-					mcfgpio_port(gpio - MCFGPIO_SCR_START))
-
-#define MCFGPIO_CLRR_PORT(gpio)		(MCFGPIO_CLRR + \
-					mcfgpio_port(gpio - MCFGPIO_SCR_START))
-#else
-
-#define MCFGPIO_SCR_START		MCFGPIO_PIN_MAX
-/* with MCFGPIO_SCR == MCFGPIO_PIN_MAX, these will be optimized away */
-#define MCFGPIO_SETR_PORT(gpio)		0
-#define MCFGPIO_CLRR_PORT(gpio)		0
-
-#endif
-/*
- * Coldfire specific helper functions
- */
-
-/* return the port pin data register for a gpio */
-static inline u32 __mcf_gpio_ppdr(unsigned gpio)
-{
-#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || \
-    defined(CONFIG_M5307) || defined(CONFIG_M5407)
-	return MCFSIM_PADAT;
-#elif defined(CONFIG_M5272)
-	if (gpio < 16)
-		return MCFSIM_PADAT;
-	else if (gpio < 32)
-		return MCFSIM_PBDAT;
-	else
-		return MCFSIM_PCDAT;
-#elif defined(CONFIG_M5249)
-	if (gpio < 32)
-		return MCFSIM2_GPIOREAD;
-	else
-		return MCFSIM2_GPIO1READ;
-#elif defined(CONFIG_M520x) || defined(CONFIG_M523x) || \
-      defined(CONFIG_M527x) || defined(CONFIG_M528x) || defined(CONFIG_M532x)
-	if (gpio < 8)
-		return MCFEPORT_EPPDR;
-#if defined(CONFIG_M528x)
-	else if (gpio < 16)
-		return MCFGPTA_GPTPORT;
-	else if (gpio < 24)
-		return MCFGPTB_GPTPORT;
-	else if (gpio < 32)
-		return MCFQADC_PORTQA;
-	else if (gpio < 40)
-		return MCFQADC_PORTQB;
-#endif
-	else
-		return MCFGPIO_PPDR + mcfgpio_port(gpio - MCFGPIO_SCR_START);
-#else
-	return 0;
-#endif
-}
-
-/* return the port output data register for a gpio */
-static inline u32 __mcf_gpio_podr(unsigned gpio)
-{
-#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || \
-    defined(CONFIG_M5307) || defined(CONFIG_M5407)
-	return MCFSIM_PADAT;
-#elif defined(CONFIG_M5272)
-	if (gpio < 16)
-		return MCFSIM_PADAT;
-	else if (gpio < 32)
-		return MCFSIM_PBDAT;
-	else
-		return MCFSIM_PCDAT;
-#elif defined(CONFIG_M5249)
-	if (gpio < 32)
-		return MCFSIM2_GPIOWRITE;
-	else
-		return MCFSIM2_GPIO1WRITE;
-#elif defined(CONFIG_M520x) || defined(CONFIG_M523x) || \
-      defined(CONFIG_M527x) || defined(CONFIG_M528x) || defined(CONFIG_M532x)
-	if (gpio < 8)
-		return MCFEPORT_EPDR;
-#if defined(CONFIG_M528x)
-	else if (gpio < 16)
-		return MCFGPTA_GPTPORT;
-	else if (gpio < 24)
-		return MCFGPTB_GPTPORT;
-	else if (gpio < 32)
-		return MCFQADC_PORTQA;
-	else if (gpio < 40)
-		return MCFQADC_PORTQB;
-#endif
-	else
-		return MCFGPIO_PODR + mcfgpio_port(gpio - MCFGPIO_SCR_START);
-#else
-	return 0;
-#endif
-}
-
-/*
- * The Generic GPIO functions
- *
- * If the gpio is a compile time constant and is one of the Coldfire gpios,
- * use the inline version, otherwise dispatch thru gpiolib.
- */
-
-static inline int gpio_get_value(unsigned gpio)
-{
-	if (__builtin_constant_p(gpio) && gpio < MCFGPIO_PIN_MAX)
-		return mcfgpio_read(__mcf_gpio_ppdr(gpio)) & mcfgpio_bit(gpio);
-	else
-		return __gpio_get_value(gpio);
-}
-
-static inline void gpio_set_value(unsigned gpio, int value)
-{
-	if (__builtin_constant_p(gpio) && gpio < MCFGPIO_PIN_MAX) {
-		if (gpio < MCFGPIO_SCR_START) {
-			unsigned long flags;
-			MCFGPIO_PORTTYPE data;
-
-			local_irq_save(flags);
-			data = mcfgpio_read(__mcf_gpio_podr(gpio));
-			if (value)
-				data |= mcfgpio_bit(gpio);
-			else
-				data &= ~mcfgpio_bit(gpio);
-			mcfgpio_write(data, __mcf_gpio_podr(gpio));
-			local_irq_restore(flags);
-		} else {
-			if (value)
-				mcfgpio_write(mcfgpio_bit(gpio),
-						MCFGPIO_SETR_PORT(gpio));
-			else
-				mcfgpio_write(~mcfgpio_bit(gpio),
-						MCFGPIO_CLRR_PORT(gpio));
-		}
-	} else
-		__gpio_set_value(gpio, value);
-}
-
-static inline int gpio_to_irq(unsigned gpio)
-{
-	return (gpio < MCFGPIO_IRQ_MAX) ? gpio + MCFGPIO_IRQ_VECBASE
-		: __gpio_to_irq(gpio);
-}
-
-static inline int irq_to_gpio(unsigned irq)
-{
-	return (irq >= MCFGPIO_IRQ_VECBASE &&
-		irq < (MCFGPIO_IRQ_VECBASE + MCFGPIO_IRQ_MAX)) ?
-		irq - MCFGPIO_IRQ_VECBASE : -ENXIO;
-}
-
-static inline int gpio_cansleep(unsigned gpio)
-{
-	return gpio < MCFGPIO_PIN_MAX ? 0 : __gpio_cansleep(gpio);
-}
-
-#endif
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/hardirq.h b/ANDROID_3.4.5/arch/m68k/include/asm/hardirq.h
deleted file mode 100644
index db30ed27..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/hardirq.h
+++ /dev/null
@@ -1,39 +0,0 @@
-#ifndef __M68K_HARDIRQ_H
-#define __M68K_HARDIRQ_H
-
-#include <linux/threads.h>
-#include <linux/cache.h>
-#include <asm/irq.h>
-
-#define HARDIRQ_BITS	8
-
-/*
- * The hardirq mask has to be large enough to have
- * space for potentially all IRQ sources in the system
- * nesting on a single CPU:
- */
-#if (1 << HARDIRQ_BITS) < NR_IRQS
-# error HARDIRQ_BITS is too low!
-#endif
-
-#ifdef CONFIG_MMU
-
-static inline void ack_bad_irq(unsigned int irq)
-{
-	pr_crit("unexpected IRQ trap at vector %02x\n", irq);
-}
-
-/* entry.S is sensitive to the offsets of these fields */
-typedef struct {
-	unsigned int __softirq_pending;
-} ____cacheline_aligned irq_cpustat_t;
-
-#include <linux/irq_cpustat.h>	/* Standard mappings for irq_cpustat_t above */
-
-#else
-
-#include <asm-generic/hardirq.h>
-
-#endif /* !CONFIG_MMU */
-
-#endif
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/hp300hw.h b/ANDROID_3.4.5/arch/m68k/include/asm/hp300hw.h
deleted file mode 100644
index d998ea67..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/hp300hw.h
+++ /dev/null
@@ -1,25 +0,0 @@
-#ifndef _M68K_HP300HW_H
-#define _M68K_HP300HW_H
-
-extern unsigned long hp300_model;
-
-/* This information was taken from NetBSD */
-#define	HP_320		(0)	/* 16MHz 68020+HP MMU+16K external cache */
-#define	HP_330		(1)	/* 16MHz 68020+68851 MMU */
-#define	HP_340		(2)	/* 16MHz 68030 */
-#define	HP_345		(3)	/* 50MHz 68030+32K external cache */
-#define	HP_350		(4)	/* 25MHz 68020+HP MMU+32K external cache */
-#define	HP_360		(5)	/* 25MHz 68030 */
-#define	HP_370		(6)	/* 33MHz 68030+64K external cache */
-#define	HP_375		(7)	/* 50MHz 68030+32K external cache */
-#define	HP_380		(8)	/* 25MHz 68040 */
-#define	HP_385		(9)	/* 33MHz 68040 */
-
-#define	HP_400		(10)	/* 50MHz 68030+32K external cache */
-#define	HP_425T		(11)	/* 25MHz 68040 - model 425t */
-#define	HP_425S		(12)	/* 25MHz 68040 - model 425s */
-#define HP_425E		(13)	/* 25MHz 68040 - model 425e */
-#define HP_433T		(14)	/* 33MHz 68040 - model 433t */
-#define HP_433S		(15)	/* 33MHz 68040 - model 433s */
-
-#endif /* _M68K_HP300HW_H */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/hw_irq.h b/ANDROID_3.4.5/arch/m68k/include/asm/hw_irq.h
deleted file mode 100644
index eacef095..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/hw_irq.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __ASM_M68K_HW_IRQ_H
-#define __ASM_M68K_HW_IRQ_H
-
-/* Dummy include. */
-
-#endif
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/hwtest.h b/ANDROID_3.4.5/arch/m68k/include/asm/hwtest.h
deleted file mode 100644
index 402c8a44..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/hwtest.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/* Routines to test for presence/absence of hardware registers:
- * see arch/m68k/mm/hwtest.c.
- *  -- PMM <pmaydell@chiark.greenend.org.uk> 05/1998
- *
- * Removed __init from decls.  We might want them in modules, and
- * the code is tiny anyway.  16/5/98 pb
- */
-
-#ifndef __ASM_HWTEST_H
-#define __ASM_HWTEST_H
-
-extern int hwreg_present(volatile void *regp);
-extern int hwreg_write(volatile void *regp, unsigned short val);
-
-#endif
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/ide.h b/ANDROID_3.4.5/arch/m68k/include/asm/ide.h
deleted file mode 100644
index 492fee8a..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/ide.h
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- *  Copyright (C) 1994-1996  Linus Torvalds & authors
- */
-
-/* Copyright(c) 1996 Kars de Jong */
-/* Based on the ide driver from 1.2.13pl8 */
-
-/*
- * Credits (alphabetical):
- *
- *  - Bjoern Brauel
- *  - Kars de Jong
- *  - Torsten Ebeling
- *  - Dwight Engen
- *  - Thorsten Floeck
- *  - Roman Hodek
- *  - Guenther Kelleter
- *  - Chris Lawrence
- *  - Michael Rausch
- *  - Christian Sauer
- *  - Michael Schmitz
- *  - Jes Soerensen
- *  - Michael Thurm
- *  - Geert Uytterhoeven
- */
-
-#ifndef _M68K_IDE_H
-#define _M68K_IDE_H
-
-#ifdef __KERNEL__
-#include <asm/setup.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-
-#ifdef CONFIG_MMU
-
-/*
- * Get rid of defs from io.h - ide has its private and conflicting versions
- * Since so far no single m68k platform uses ISA/PCI I/O space for IDE, we
- * always use the `raw' MMIO versions
- */
-#undef readb
-#undef readw
-#undef writeb
-#undef writew
-
-#define readb				in_8
-#define readw				in_be16
-#define __ide_mm_insw(port, addr, n)	raw_insw((u16 *)port, addr, n)
-#define __ide_mm_insl(port, addr, n)	raw_insl((u32 *)port, addr, n)
-#define writeb(val, port)		out_8(port, val)
-#define writew(val, port)		out_be16(port, val)
-#define __ide_mm_outsw(port, addr, n)	raw_outsw((u16 *)port, addr, n)
-#define __ide_mm_outsl(port, addr, n)	raw_outsl((u32 *)port, addr, n)
-
-#else
-
-#define __ide_mm_insw(port, addr, n)	io_insw((unsigned int)port, addr, n)
-#define __ide_mm_insl(port, addr, n)	io_insl((unsigned int)port, addr, n)
-#define __ide_mm_outsw(port, addr, n)	io_outsw((unsigned int)port, addr, n)
-#define __ide_mm_outsl(port, addr, n)	io_outsl((unsigned int)port, addr, n)
-
-#endif /* CONFIG_MMU */
-
-#endif /* __KERNEL__ */
-#endif /* _M68K_IDE_H */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/idprom.h b/ANDROID_3.4.5/arch/m68k/include/asm/idprom.h
deleted file mode 100644
index 160616a8..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/idprom.h
+++ /dev/null
@@ -1,27 +0,0 @@
-#ifndef _M68K_IDPROM_H
-#define _M68K_IDPROM_H
-/*
- * idprom.h: Macros and defines for idprom routines
- *
- * Copyright (C) 1995,1996 David S. Miller (davem@caip.rutgers.edu)
- */
-
-#include <linux/types.h>
-
-struct idprom {
-	u8		id_format;	/* Format identifier (always 0x01) */
-	u8		id_machtype;	/* Machine type */
-	u8		id_ethaddr[6];	/* Hardware ethernet address */
-	s32		id_date;	/* Date of manufacture */
-	u32		id_sernum:24;	/* Unique serial number */
-	u8		id_cksum;	/* Checksum - xor of the data bytes */
-	u8		reserved[16];
-};
-
-extern struct idprom *idprom;
-extern void idprom_init(void);
-
-/* Sun3: in control space */
-#define SUN3_IDPROM_BASE	0x00000000
-
-#endif /* !(_M68K_IDPROM_H) */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/intersil.h b/ANDROID_3.4.5/arch/m68k/include/asm/intersil.h
deleted file mode 100644
index f482902c..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/intersil.h
+++ /dev/null
@@ -1,48 +0,0 @@
-#ifndef _SUN3_INTERSIL_H
-#define _SUN3_INTERSIL_H
-/* bits 0 and 1 */
-#define INTERSIL_FREQ_32K        0x00
-#define INTERSIL_FREQ_1M         0x01
-#define INTERSIL_FREQ_2M         0x02
-#define INTERSIL_FREQ_4M         0x03
-
-/* bit 2 */
-#define INTERSIL_12H_MODE   0x00
-#define INTERSIL_24H_MODE   0x04
-
-/* bit 3 */
-#define INTERSIL_STOP            0x00
-#define INTERSIL_RUN             0x08
-
-/* bit 4 */
-#define INTERSIL_INT_ENABLE     0x10
-#define INTERSIL_INT_DISABLE    0x00
-
-/* bit 5 */
-#define INTERSIL_MODE_NORMAL     0x00
-#define INTERSIL_MODE_TEST       0x20
-
-#define INTERSIL_HZ_100_MASK	 0x02
-
-struct intersil_dt {
-	unsigned char	csec;
-	unsigned char	hour;
-	unsigned char	minute;
-	unsigned char	second;
-	unsigned char	month;
-	unsigned char	day;
-	unsigned char	year;
-	unsigned char	weekday;
-};
-
-struct intersil_7170 {
-	struct intersil_dt counter;
-	struct intersil_dt alarm;
-	unsigned char	int_reg;
-	unsigned char	cmd_reg;
-};
-
-extern volatile char* clock_va;
-#define intersil_clock ((volatile struct intersil_7170 *) clock_va)
-#define intersil_clear() (void)intersil_clock->int_reg
-#endif
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/io.h b/ANDROID_3.4.5/arch/m68k/include/asm/io.h
deleted file mode 100644
index c7210ba1..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/io.h
+++ /dev/null
@@ -1,5 +0,0 @@
-#ifdef __uClinux__
-#include "io_no.h"
-#else
-#include "io_mm.h"
-#endif
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/io_mm.h b/ANDROID_3.4.5/arch/m68k/include/asm/io_mm.h
deleted file mode 100644
index 0fb34680..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/io_mm.h
+++ /dev/null
@@ -1,336 +0,0 @@
-/*
- * linux/include/asm-m68k/io.h
- *
- * 4/1/00 RZ: - rewritten to avoid clashes between ISA/PCI and other
- *              IO access
- *            - added Q40 support
- *            - added skeleton for GG-II and Amiga PCMCIA
- * 2/3/01 RZ: - moved a few more defs into raw_io.h
- *
- * inX/outX should not be used by any driver unless it does
- * ISA access. Other drivers should use function defined in raw_io.h
- * or define its own macros on top of these.
- *
- *    inX(),outX()              are for ISA I/O
- *    isa_readX(),isa_writeX()  are for ISA memory
- */
-
-#ifndef _IO_H
-#define _IO_H
-
-#ifdef __KERNEL__
-
-#include <linux/compiler.h>
-#include <asm/raw_io.h>
-#include <asm/virtconvert.h>
-
-#include <asm-generic/iomap.h>
-
-#ifdef CONFIG_ATARI
-#include <asm/atarihw.h>
-#endif
-
-
-/*
- * IO/MEM definitions for various ISA bridges
- */
-
-
-#ifdef CONFIG_Q40
-
-#define q40_isa_io_base  0xff400000
-#define q40_isa_mem_base 0xff800000
-
-#define Q40_ISA_IO_B(ioaddr) (q40_isa_io_base+1+4*((unsigned long)(ioaddr)))
-#define Q40_ISA_IO_W(ioaddr) (q40_isa_io_base+  4*((unsigned long)(ioaddr)))
-#define Q40_ISA_MEM_B(madr)  (q40_isa_mem_base+1+4*((unsigned long)(madr)))
-#define Q40_ISA_MEM_W(madr)  (q40_isa_mem_base+  4*((unsigned long)(madr)))
-
-#define MULTI_ISA 0
-#endif /* Q40 */
-
-#ifdef CONFIG_AMIGA_PCMCIA
-#include <asm/amigayle.h>
-
-#define AG_ISA_IO_B(ioaddr) ( GAYLE_IO+(ioaddr)+(((ioaddr)&1)*GAYLE_ODD) )
-#define AG_ISA_IO_W(ioaddr) ( GAYLE_IO+(ioaddr) )
-
-#ifndef MULTI_ISA
-#define MULTI_ISA 0
-#else
-#undef MULTI_ISA
-#define MULTI_ISA 1
-#endif
-#endif /* AMIGA_PCMCIA */
-
-
-
-#ifdef CONFIG_ISA
-
-#if MULTI_ISA == 0
-#undef MULTI_ISA
-#endif
-
-#define ISA_TYPE_Q40 (1)
-#define ISA_TYPE_AG  (2)
-
-#if defined(CONFIG_Q40) && !defined(MULTI_ISA)
-#define ISA_TYPE ISA_TYPE_Q40
-#define ISA_SEX  0
-#endif
-#if defined(CONFIG_AMIGA_PCMCIA) && !defined(MULTI_ISA)
-#define ISA_TYPE ISA_TYPE_AG
-#define ISA_SEX  1
-#endif
-
-#ifdef MULTI_ISA
-extern int isa_type;
-extern int isa_sex;
-
-#define ISA_TYPE isa_type
-#define ISA_SEX  isa_sex
-#endif
-
-/*
- * define inline addr translation functions. Normally only one variant will
- * be compiled in so the case statement will be optimised away
- */
-
-static inline u8 __iomem *isa_itb(unsigned long addr)
-{
-  switch(ISA_TYPE)
-    {
-#ifdef CONFIG_Q40
-    case ISA_TYPE_Q40: return (u8 __iomem *)Q40_ISA_IO_B(addr);
-#endif
-#ifdef CONFIG_AMIGA_PCMCIA
-    case ISA_TYPE_AG: return (u8 __iomem *)AG_ISA_IO_B(addr);
-#endif
-    default: return NULL; /* avoid warnings, just in case */
-    }
-}
-static inline u16 __iomem *isa_itw(unsigned long addr)
-{
-  switch(ISA_TYPE)
-    {
-#ifdef CONFIG_Q40
-    case ISA_TYPE_Q40: return (u16 __iomem *)Q40_ISA_IO_W(addr);
-#endif
-#ifdef CONFIG_AMIGA_PCMCIA
-    case ISA_TYPE_AG: return (u16 __iomem *)AG_ISA_IO_W(addr);
-#endif
-    default: return NULL; /* avoid warnings, just in case */
-    }
-}
-static inline u32 __iomem *isa_itl(unsigned long addr)
-{
-  switch(ISA_TYPE)
-    {
-#ifdef CONFIG_AMIGA_PCMCIA
-    case ISA_TYPE_AG: return (u32 __iomem *)AG_ISA_IO_W(addr);
-#endif
-    default: return 0; /* avoid warnings, just in case */
-    }
-}
-static inline u8 __iomem *isa_mtb(unsigned long addr)
-{
-  switch(ISA_TYPE)
-    {
-#ifdef CONFIG_Q40
-    case ISA_TYPE_Q40: return (u8 __iomem *)Q40_ISA_MEM_B(addr);
-#endif
-#ifdef CONFIG_AMIGA_PCMCIA
-    case ISA_TYPE_AG: return (u8 __iomem *)addr;
-#endif
-    default: return NULL; /* avoid warnings, just in case */
-    }
-}
-static inline u16 __iomem *isa_mtw(unsigned long addr)
-{
-  switch(ISA_TYPE)
-    {
-#ifdef CONFIG_Q40
-    case ISA_TYPE_Q40: return (u16 __iomem *)Q40_ISA_MEM_W(addr);
-#endif
-#ifdef CONFIG_AMIGA_PCMCIA
-    case ISA_TYPE_AG: return (u16 __iomem *)addr;
-#endif
-    default: return NULL; /* avoid warnings, just in case */
-    }
-}
-
-
-#define isa_inb(port)      in_8(isa_itb(port))
-#define isa_inw(port)      (ISA_SEX ? in_be16(isa_itw(port)) : in_le16(isa_itw(port)))
-#define isa_inl(port)      (ISA_SEX ? in_be32(isa_itl(port)) : in_le32(isa_itl(port)))
-#define isa_outb(val,port) out_8(isa_itb(port),(val))
-#define isa_outw(val,port) (ISA_SEX ? out_be16(isa_itw(port),(val)) : out_le16(isa_itw(port),(val)))
-#define isa_outl(val,port) (ISA_SEX ? out_be32(isa_itl(port),(val)) : out_le32(isa_itl(port),(val)))
-
-#define isa_readb(p)       in_8(isa_mtb((unsigned long)(p)))
-#define isa_readw(p)       \
-	(ISA_SEX ? in_be16(isa_mtw((unsigned long)(p)))	\
-		 : in_le16(isa_mtw((unsigned long)(p))))
-#define isa_writeb(val,p)  out_8(isa_mtb((unsigned long)(p)),(val))
-#define isa_writew(val,p)  \
-	(ISA_SEX ? out_be16(isa_mtw((unsigned long)(p)),(val))	\
-		 : out_le16(isa_mtw((unsigned long)(p)),(val)))
-
-static inline void isa_delay(void)
-{
-  switch(ISA_TYPE)
-    {
-#ifdef CONFIG_Q40
-    case ISA_TYPE_Q40: isa_outb(0,0x80); break;
-#endif
-#ifdef CONFIG_AMIGA_PCMCIA
-    case ISA_TYPE_AG: break;
-#endif
-    default: break; /* avoid warnings */
-    }
-}
-
-#define isa_inb_p(p)      ({u8 v=isa_inb(p);isa_delay();v;})
-#define isa_outb_p(v,p)   ({isa_outb((v),(p));isa_delay();})
-#define isa_inw_p(p)      ({u16 v=isa_inw(p);isa_delay();v;})
-#define isa_outw_p(v,p)   ({isa_outw((v),(p));isa_delay();})
-#define isa_inl_p(p)      ({u32 v=isa_inl(p);isa_delay();v;})
-#define isa_outl_p(v,p)   ({isa_outl((v),(p));isa_delay();})
-
-#define isa_insb(port, buf, nr) raw_insb(isa_itb(port), (u8 *)(buf), (nr))
-#define isa_outsb(port, buf, nr) raw_outsb(isa_itb(port), (u8 *)(buf), (nr))
-
-#define isa_insw(port, buf, nr)     \
-       (ISA_SEX ? raw_insw(isa_itw(port), (u16 *)(buf), (nr)) :    \
-                  raw_insw_swapw(isa_itw(port), (u16 *)(buf), (nr)))
-
-#define isa_outsw(port, buf, nr)    \
-       (ISA_SEX ? raw_outsw(isa_itw(port), (u16 *)(buf), (nr)) :  \
-                  raw_outsw_swapw(isa_itw(port), (u16 *)(buf), (nr)))
-
-#define isa_insl(port, buf, nr)     \
-       (ISA_SEX ? raw_insl(isa_itl(port), (u32 *)(buf), (nr)) :    \
-                  raw_insw_swapw(isa_itw(port), (u16 *)(buf), (nr)<<1))
-
-#define isa_outsl(port, buf, nr)    \
-       (ISA_SEX ? raw_outsl(isa_itl(port), (u32 *)(buf), (nr)) :  \
-                  raw_outsw_swapw(isa_itw(port), (u16 *)(buf), (nr)<<1))
-
-
-#define inb     isa_inb
-#define inb_p   isa_inb_p
-#define outb    isa_outb
-#define outb_p  isa_outb_p
-#define inw     isa_inw
-#define inw_p   isa_inw_p
-#define outw    isa_outw
-#define outw_p  isa_outw_p
-#define inl     isa_inl
-#define inl_p   isa_inl_p
-#define outl    isa_outl
-#define outl_p  isa_outl_p
-#define insb    isa_insb
-#define insw    isa_insw
-#define insl    isa_insl
-#define outsb   isa_outsb
-#define outsw   isa_outsw
-#define outsl   isa_outsl
-#define readb   isa_readb
-#define readw   isa_readw
-#define writeb  isa_writeb
-#define writew  isa_writew
-
-#else  /* CONFIG_ISA */
-
-/*
- * We need to define dummy functions for GENERIC_IOMAP support.
- */
-#define inb(port)          0xff
-#define inb_p(port)        0xff
-#define outb(val,port)     ((void)0)
-#define outb_p(val,port)   ((void)0)
-#define inw(port)          0xffff
-#define inw_p(port)        0xffff
-#define outw(val,port)     ((void)0)
-#define outw_p(val,port)   ((void)0)
-#define inl(port)          0xffffffffUL
-#define inl_p(port)        0xffffffffUL
-#define outl(val,port)     ((void)0)
-#define outl_p(val,port)   ((void)0)
-
-#define insb(port,buf,nr)  ((void)0)
-#define outsb(port,buf,nr) ((void)0)
-#define insw(port,buf,nr)  ((void)0)
-#define outsw(port,buf,nr) ((void)0)
-#define insl(port,buf,nr)  ((void)0)
-#define outsl(port,buf,nr) ((void)0)
-
-/*
- * These should be valid on any ioremap()ed region
- */
-#define readb(addr)      in_8(addr)
-#define writeb(val,addr) out_8((addr),(val))
-#define readw(addr)      in_le16(addr)
-#define writew(val,addr) out_le16((addr),(val))
-
-#endif /* CONFIG_ISA */
-
-#define readl(addr)      in_le32(addr)
-#define writel(val,addr) out_le32((addr),(val))
-
-#define mmiowb()
-
-static inline void __iomem *ioremap(unsigned long physaddr, unsigned long size)
-{
-	return __ioremap(physaddr, size, IOMAP_NOCACHE_SER);
-}
-static inline void __iomem *ioremap_nocache(unsigned long physaddr, unsigned long size)
-{
-	return __ioremap(physaddr, size, IOMAP_NOCACHE_SER);
-}
-static inline void __iomem *ioremap_writethrough(unsigned long physaddr,
-					 unsigned long size)
-{
-	return __ioremap(physaddr, size, IOMAP_WRITETHROUGH);
-}
-static inline void __iomem *ioremap_fullcache(unsigned long physaddr,
-				      unsigned long size)
-{
-	return __ioremap(physaddr, size, IOMAP_FULL_CACHING);
-}
-
-static inline void memset_io(volatile void __iomem *addr, unsigned char val, int count)
-{
-	__builtin_memset((void __force *) addr, val, count);
-}
-static inline void memcpy_fromio(void *dst, const volatile void __iomem *src, int count)
-{
-	__builtin_memcpy(dst, (void __force *) src, count);
-}
-static inline void memcpy_toio(volatile void __iomem *dst, const void *src, int count)
-{
-	__builtin_memcpy((void __force *) dst, src, count);
-}
-
-#ifndef CONFIG_SUN3
-#define IO_SPACE_LIMIT 0xffff
-#else
-#define IO_SPACE_LIMIT 0x0fffffff
-#endif
-
-#endif /* __KERNEL__ */
-
-#define __ARCH_HAS_NO_PAGE_ZERO_MAPPED		1
-
-/*
- * Convert a physical pointer to a virtual kernel pointer for /dev/mem
- * access
- */
-#define xlate_dev_mem_ptr(p)	__va(p)
-
-/*
- * Convert a virtual cached pointer to an uncached pointer
- */
-#define xlate_dev_kmem_ptr(p)	p
-
-#endif /* _IO_H */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/io_no.h b/ANDROID_3.4.5/arch/m68k/include/asm/io_no.h
deleted file mode 100644
index 353bf754..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/io_no.h
+++ /dev/null
@@ -1,183 +0,0 @@
-#ifndef _M68KNOMMU_IO_H
-#define _M68KNOMMU_IO_H
-
-#ifdef __KERNEL__
-
-#include <asm/virtconvert.h>
-
-/*
- * These are for ISA/PCI shared memory _only_ and should never be used
- * on any other type of memory, including Zorro memory. They are meant to
- * access the bus in the bus byte order which is little-endian!.
- *
- * readX/writeX() are used to access memory mapped devices. On some
- * architectures the memory mapped IO stuff needs to be accessed
- * differently. On the m68k architecture, we just read/write the
- * memory location directly.
- */
-/* ++roman: The assignments to temp. vars avoid that gcc sometimes generates
- * two accesses to memory, which may be undesirable for some devices.
- */
-
-/*
- * swap functions are sometimes needed to interface little-endian hardware
- */
-static inline unsigned short _swapw(volatile unsigned short v)
-{
-    return ((v << 8) | (v >> 8));
-}
-
-static inline unsigned int _swapl(volatile unsigned long v)
-{
-    return ((v << 24) | ((v & 0xff00) << 8) | ((v & 0xff0000) >> 8) | (v >> 24));
-}
-
-#define readb(addr) \
-    ({ unsigned char __v = (*(volatile unsigned char *) (addr)); __v; })
-#define readw(addr) \
-    ({ unsigned short __v = (*(volatile unsigned short *) (addr)); __v; })
-#define readl(addr) \
-    ({ unsigned int __v = (*(volatile unsigned int *) (addr)); __v; })
-
-#define readb_relaxed(addr) readb(addr)
-#define readw_relaxed(addr) readw(addr)
-#define readl_relaxed(addr) readl(addr)
-
-#define writeb(b,addr) (void)((*(volatile unsigned char *) (addr)) = (b))
-#define writew(b,addr) (void)((*(volatile unsigned short *) (addr)) = (b))
-#define writel(b,addr) (void)((*(volatile unsigned int *) (addr)) = (b))
-
-#define __raw_readb readb
-#define __raw_readw readw
-#define __raw_readl readl
-#define __raw_writeb writeb
-#define __raw_writew writew
-#define __raw_writel writel
-
-static inline void io_outsb(unsigned int addr, void *buf, int len)
-{
-	volatile unsigned char *ap = (volatile unsigned char *) addr;
-	unsigned char *bp = (unsigned char *) buf;
-	while (len--)
-		*ap = *bp++;
-}
-
-static inline void io_outsw(unsigned int addr, void *buf, int len)
-{
-	volatile unsigned short *ap = (volatile unsigned short *) addr;
-	unsigned short *bp = (unsigned short *) buf;
-	while (len--)
-		*ap = _swapw(*bp++);
-}
-
-static inline void io_outsl(unsigned int addr, void *buf, int len)
-{
-	volatile unsigned int *ap = (volatile unsigned int *) addr;
-	unsigned int *bp = (unsigned int *) buf;
-	while (len--)
-		*ap = _swapl(*bp++);
-}
-
-static inline void io_insb(unsigned int addr, void *buf, int len)
-{
-	volatile unsigned char *ap = (volatile unsigned char *) addr;
-	unsigned char *bp = (unsigned char *) buf;
-	while (len--)
-		*bp++ = *ap;
-}
-
-static inline void io_insw(unsigned int addr, void *buf, int len)
-{
-	volatile unsigned short *ap = (volatile unsigned short *) addr;
-	unsigned short *bp = (unsigned short *) buf;
-	while (len--)
-		*bp++ = _swapw(*ap);
-}
-
-static inline void io_insl(unsigned int addr, void *buf, int len)
-{
-	volatile unsigned int *ap = (volatile unsigned int *) addr;
-	unsigned int *bp = (unsigned int *) buf;
-	while (len--)
-		*bp++ = _swapl(*ap);
-}
-
-#define mmiowb()
-
-/*
- *	make the short names macros so specific devices
- *	can override them as required
- */
-
-#define memset_io(a,b,c)	memset((void *)(a),(b),(c))
-#define memcpy_fromio(a,b,c)	memcpy((a),(void *)(b),(c))
-#define memcpy_toio(a,b,c)	memcpy((void *)(a),(b),(c))
-
-#define inb(addr)    readb(addr)
-#define inw(addr)    readw(addr)
-#define inl(addr)    readl(addr)
-#define outb(x,addr) ((void) writeb(x,addr))
-#define outw(x,addr) ((void) writew(x,addr))
-#define outl(x,addr) ((void) writel(x,addr))
-
-#define inb_p(addr)    inb(addr)
-#define inw_p(addr)    inw(addr)
-#define inl_p(addr)    inl(addr)
-#define outb_p(x,addr) outb(x,addr)
-#define outw_p(x,addr) outw(x,addr)
-#define outl_p(x,addr) outl(x,addr)
-
-#define outsb(a,b,l) io_outsb(a,b,l)
-#define outsw(a,b,l) io_outsw(a,b,l)
-#define outsl(a,b,l) io_outsl(a,b,l)
-
-#define insb(a,b,l) io_insb(a,b,l)
-#define insw(a,b,l) io_insw(a,b,l)
-#define insl(a,b,l) io_insl(a,b,l)
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-
-/* Values for nocacheflag and cmode */
-#define IOMAP_FULL_CACHING		0
-#define IOMAP_NOCACHE_SER		1
-#define IOMAP_NOCACHE_NONSER		2
-#define IOMAP_WRITETHROUGH		3
-
-static inline void *__ioremap(unsigned long physaddr, unsigned long size, int cacheflag)
-{
-	return (void *) physaddr;
-}
-static inline void *ioremap(unsigned long physaddr, unsigned long size)
-{
-	return __ioremap(physaddr, size, IOMAP_NOCACHE_SER);
-}
-static inline void *ioremap_nocache(unsigned long physaddr, unsigned long size)
-{
-	return __ioremap(physaddr, size, IOMAP_NOCACHE_SER);
-}
-static inline void *ioremap_writethrough(unsigned long physaddr, unsigned long size)
-{
-	return __ioremap(physaddr, size, IOMAP_WRITETHROUGH);
-}
-static inline void *ioremap_fullcache(unsigned long physaddr, unsigned long size)
-{
-	return __ioremap(physaddr, size, IOMAP_FULL_CACHING);
-}
-
-#define	iounmap(addr)	do { } while(0)
-
-/*
- * Convert a physical pointer to a virtual kernel pointer for /dev/mem
- * access
- */
-#define xlate_dev_mem_ptr(p)	__va(p)
-
-/*
- * Convert a virtual cached pointer to an uncached pointer
- */
-#define xlate_dev_kmem_ptr(p)	p
-
-#endif /* __KERNEL__ */
-
-#endif /* _M68KNOMMU_IO_H */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/ioctl.h b/ANDROID_3.4.5/arch/m68k/include/asm/ioctl.h
deleted file mode 100644
index b279fe06..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/ioctl.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/ioctl.h>
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/ioctls.h b/ANDROID_3.4.5/arch/m68k/include/asm/ioctls.h
deleted file mode 100644
index 1332bb4c..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/ioctls.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef __ARCH_M68K_IOCTLS_H__
-#define __ARCH_M68K_IOCTLS_H__
-
-#define FIOQSIZE	0x545E
-
-#include <asm-generic/ioctls.h>
-
-#endif /* __ARCH_M68K_IOCTLS_H__ */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/ipcbuf.h b/ANDROID_3.4.5/arch/m68k/include/asm/ipcbuf.h
deleted file mode 100644
index 84c7e51c..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/ipcbuf.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/ipcbuf.h>
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/irq.h b/ANDROID_3.4.5/arch/m68k/include/asm/irq.h
deleted file mode 100644
index c1155f0e..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/irq.h
+++ /dev/null
@@ -1,76 +0,0 @@
-#ifndef _M68K_IRQ_H_
-#define _M68K_IRQ_H_
-
-/*
- * This should be the same as the max(NUM_X_SOURCES) for all the
- * different m68k hosts compiled into the kernel.
- * Currently the Atari has 72 and the Amiga 24, but if both are
- * supported in the kernel it is better to make room for 72.
- */
-#if defined(CONFIG_COLDFIRE)
-#define NR_IRQS 256
-#elif defined(CONFIG_VME) || defined(CONFIG_SUN3) || defined(CONFIG_SUN3X)
-#define NR_IRQS 200
-#elif defined(CONFIG_ATARI) || defined(CONFIG_MAC)
-#define NR_IRQS 72
-#elif defined(CONFIG_Q40)
-#define NR_IRQS	43
-#elif defined(CONFIG_AMIGA) || !defined(CONFIG_MMU)
-#define NR_IRQS	32
-#elif defined(CONFIG_APOLLO)
-#define NR_IRQS	24
-#elif defined(CONFIG_HP300)
-#define NR_IRQS	8
-#else
-#define NR_IRQS	0
-#endif
-
-#if defined(CONFIG_M68020) || defined(CONFIG_M68030) || \
-    defined(CONFIG_M68040) || defined(CONFIG_M68060)
-
-/*
- * Interrupt source definitions
- * General interrupt sources are the level 1-7.
- * Adding an interrupt service routine for one of these sources
- * results in the addition of that routine to a chain of routines.
- * Each one is called in succession.  Each individual interrupt
- * service routine should determine if the device associated with
- * that routine requires service.
- */
-
-#define IRQ_SPURIOUS	0
-
-#define IRQ_AUTO_1	1	/* level 1 interrupt */
-#define IRQ_AUTO_2	2	/* level 2 interrupt */
-#define IRQ_AUTO_3	3	/* level 3 interrupt */
-#define IRQ_AUTO_4	4	/* level 4 interrupt */
-#define IRQ_AUTO_5	5	/* level 5 interrupt */
-#define IRQ_AUTO_6	6	/* level 6 interrupt */
-#define IRQ_AUTO_7	7	/* level 7 interrupt (non-maskable) */
-
-#define IRQ_USER	8
-
-struct irq_data;
-struct irq_chip;
-struct irq_desc;
-extern unsigned int m68k_irq_startup(struct irq_data *data);
-extern unsigned int m68k_irq_startup_irq(unsigned int irq);
-extern void m68k_irq_shutdown(struct irq_data *data);
-extern void m68k_setup_auto_interrupt(void (*handler)(unsigned int,
-						      struct pt_regs *));
-extern void m68k_setup_user_interrupt(unsigned int vec, unsigned int cnt);
-extern void m68k_setup_irq_controller(struct irq_chip *,
-				      void (*handle)(unsigned int irq,
-						     struct irq_desc *desc),
-				      unsigned int irq, unsigned int cnt);
-
-extern unsigned int irq_canonicalize(unsigned int irq);
-
-#else
-#define irq_canonicalize(irq)  (irq)
-#endif /* !(CONFIG_M68020 || CONFIG_M68030 || CONFIG_M68040 || CONFIG_M68060) */
-
-asmlinkage void do_IRQ(int irq, struct pt_regs *regs);
-extern atomic_t irq_err_count;
-
-#endif /* _M68K_IRQ_H_ */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/irq_regs.h b/ANDROID_3.4.5/arch/m68k/include/asm/irq_regs.h
deleted file mode 100644
index 3dd9c0b7..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/irq_regs.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/irq_regs.h>
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/irqflags.h b/ANDROID_3.4.5/arch/m68k/include/asm/irqflags.h
deleted file mode 100644
index 7ef4115b..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/irqflags.h
+++ /dev/null
@@ -1,78 +0,0 @@
-#ifndef _M68K_IRQFLAGS_H
-#define _M68K_IRQFLAGS_H
-
-#include <linux/types.h>
-#ifdef CONFIG_MMU
-#include <linux/hardirq.h>
-#endif
-#include <linux/preempt.h>
-#include <asm/thread_info.h>
-#include <asm/entry.h>
-
-static inline unsigned long arch_local_save_flags(void)
-{
-	unsigned long flags;
-	asm volatile ("movew %%sr,%0" : "=d" (flags) : : "memory");
-	return flags;
-}
-
-static inline void arch_local_irq_disable(void)
-{
-#ifdef CONFIG_COLDFIRE
-	asm volatile (
-		"move	%/sr,%%d0	\n\t"
-		"ori.l	#0x0700,%%d0	\n\t"
-		"move	%%d0,%/sr	\n"
-		: /* no outputs */
-		:
-		: "cc", "%d0", "memory");
-#else
-	asm volatile ("oriw  #0x0700,%%sr" : : : "memory");
-#endif
-}
-
-static inline void arch_local_irq_enable(void)
-{
-#if defined(CONFIG_COLDFIRE)
-	asm volatile (
-		"move	%/sr,%%d0	\n\t"
-		"andi.l	#0xf8ff,%%d0	\n\t"
-		"move	%%d0,%/sr	\n"
-		: /* no outputs */
-		:
-		: "cc", "%d0", "memory");
-#else
-# if defined(CONFIG_MMU)
-	if (MACH_IS_Q40 || !hardirq_count())
-# endif
-		asm volatile (
-			"andiw %0,%%sr"
-			:
-			: "i" (ALLOWINT)
-			: "memory");
-#endif
-}
-
-static inline unsigned long arch_local_irq_save(void)
-{
-	unsigned long flags = arch_local_save_flags();
-	arch_local_irq_disable();
-	return flags;
-}
-
-static inline void arch_local_irq_restore(unsigned long flags)
-{
-	asm volatile ("movew %0,%%sr" : : "d" (flags) : "memory");
-}
-
-static inline bool arch_irqs_disabled_flags(unsigned long flags)
-{
-	return (flags & ~ALLOWINT) != 0;
-}
-
-static inline bool arch_irqs_disabled(void)
-{
-	return arch_irqs_disabled_flags(arch_local_save_flags());
-}
-
-#endif /* _M68K_IRQFLAGS_H */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/kdebug.h b/ANDROID_3.4.5/arch/m68k/include/asm/kdebug.h
deleted file mode 100644
index 6ece1b03..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/kdebug.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/kdebug.h>
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/kmap_types.h b/ANDROID_3.4.5/arch/m68k/include/asm/kmap_types.h
deleted file mode 100644
index 3413cc13..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/kmap_types.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __ASM_M68K_KMAP_TYPES_H
-#define __ASM_M68K_KMAP_TYPES_H
-
-#include <asm-generic/kmap_types.h>
-
-#endif	/* __ASM_M68K_KMAP_TYPES_H */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/linkage.h b/ANDROID_3.4.5/arch/m68k/include/asm/linkage.h
deleted file mode 100644
index 5a822bb7..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/linkage.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef __ASM_LINKAGE_H
-#define __ASM_LINKAGE_H
-
-#define __ALIGN .align 4
-#define __ALIGN_STR ".align 4"
-
-#endif
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/local.h b/ANDROID_3.4.5/arch/m68k/include/asm/local.h
deleted file mode 100644
index 6c259263..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/local.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _ASM_M68K_LOCAL_H
-#define _ASM_M68K_LOCAL_H
-
-#include <asm-generic/local.h>
-
-#endif /* _ASM_M68K_LOCAL_H */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/local64.h b/ANDROID_3.4.5/arch/m68k/include/asm/local64.h
deleted file mode 100644
index 36c93b5c..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/local64.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/local64.h>
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/m5206sim.h b/ANDROID_3.4.5/arch/m68k/include/asm/m5206sim.h
deleted file mode 100644
index 69722366..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/m5206sim.h
+++ /dev/null
@@ -1,149 +0,0 @@
-/****************************************************************************/
-
-/*
- *	m5206sim.h -- ColdFire 5206 System Integration Module support.
- *
- *	(C) Copyright 1999, Greg Ungerer (gerg@snapgear.com)
- * 	(C) Copyright 2000, Lineo Inc. (www.lineo.com) 
- */
-
-/****************************************************************************/
-#ifndef	m5206sim_h
-#define	m5206sim_h
-/****************************************************************************/
-
-#define	CPU_NAME		"COLDFIRE(m5206)"
-#define	CPU_INSTR_PER_JIFFY	3
-#define	MCF_BUSCLK		MCF_CLK
-
-#include <asm/m52xxacr.h>
-
-/*
- *	Define the 5206 SIM register set addresses.
- */
-#define	MCFSIM_SIMR		0x03		/* SIM Config reg (r/w) */
-#define	MCFSIM_ICR1		0x14		/* Intr Ctrl reg 1 (r/w) */
-#define	MCFSIM_ICR2		0x15		/* Intr Ctrl reg 2 (r/w) */
-#define	MCFSIM_ICR3		0x16		/* Intr Ctrl reg 3 (r/w) */
-#define	MCFSIM_ICR4		0x17		/* Intr Ctrl reg 4 (r/w) */
-#define	MCFSIM_ICR5		0x18		/* Intr Ctrl reg 5 (r/w) */
-#define	MCFSIM_ICR6		0x19		/* Intr Ctrl reg 6 (r/w) */
-#define	MCFSIM_ICR7		0x1a		/* Intr Ctrl reg 7 (r/w) */
-#define	MCFSIM_ICR8		0x1b		/* Intr Ctrl reg 8 (r/w) */
-#define	MCFSIM_ICR9		0x1c		/* Intr Ctrl reg 9 (r/w) */
-#define	MCFSIM_ICR10		0x1d		/* Intr Ctrl reg 10 (r/w) */
-#define	MCFSIM_ICR11		0x1e		/* Intr Ctrl reg 11 (r/w) */
-#define	MCFSIM_ICR12		0x1f		/* Intr Ctrl reg 12 (r/w) */
-#define	MCFSIM_ICR13		0x20		/* Intr Ctrl reg 13 (r/w) */
-#ifdef CONFIG_M5206e
-#define	MCFSIM_ICR14		0x21		/* Intr Ctrl reg 14 (r/w) */
-#define	MCFSIM_ICR15		0x22		/* Intr Ctrl reg 15 (r/w) */
-#endif
-
-#define MCFSIM_IMR		0x36		/* Interrupt Mask reg (r/w) */
-#define MCFSIM_IPR		0x3a		/* Interrupt Pend reg (r/w) */
-
-#define	MCFSIM_RSR		0x40		/* Reset Status reg (r/w) */
-#define	MCFSIM_SYPCR		0x41		/* System Protection reg (r/w)*/
-
-#define	MCFSIM_SWIVR		0x42		/* SW Watchdog intr reg (r/w) */
-#define	MCFSIM_SWSR		0x43		/* SW Watchdog service (r/w) */
-
-#define	MCFSIM_DCRR		(MCF_MBAR + 0x46) /* DRAM Refresh reg (r/w) */
-#define	MCFSIM_DCTR		(MCF_MBAR + 0x4a) /* DRAM Timing reg (r/w) */
-#define	MCFSIM_DAR0		(MCF_MBAR + 0x4c) /* DRAM 0 Address reg(r/w) */
-#define	MCFSIM_DMR0		(MCF_MBAR + 0x50) /* DRAM 0 Mask reg (r/w) */
-#define	MCFSIM_DCR0		(MCF_MBAR + 0x57) /* DRAM 0 Control reg (r/w) */
-#define	MCFSIM_DAR1		(MCF_MBAR + 0x58) /* DRAM 1 Address reg (r/w) */
-#define	MCFSIM_DMR1		(MCF_MBAR + 0x5c) /* DRAM 1 Mask reg (r/w) */
-#define	MCFSIM_DCR1		(MCF_MBAR + 0x63) /* DRAM 1 Control reg (r/w) */
-
-#define	MCFSIM_CSAR0		0x64		/* CS 0 Address 0 reg (r/w) */
-#define	MCFSIM_CSMR0		0x68		/* CS 0 Mask 0 reg (r/w) */
-#define	MCFSIM_CSCR0		0x6e		/* CS 0 Control reg (r/w) */
-#define	MCFSIM_CSAR1		0x70		/* CS 1 Address reg (r/w) */
-#define	MCFSIM_CSMR1		0x74		/* CS 1 Mask reg (r/w) */
-#define	MCFSIM_CSCR1		0x7a		/* CS 1 Control reg (r/w) */
-#define	MCFSIM_CSAR2		0x7c		/* CS 2 Address reg (r/w) */
-#define	MCFSIM_CSMR2		0x80		/* CS 2 Mask reg (r/w) */
-#define	MCFSIM_CSCR2		0x86		/* CS 2 Control reg (r/w) */
-#define	MCFSIM_CSAR3		0x88		/* CS 3 Address reg (r/w) */
-#define	MCFSIM_CSMR3		0x8c		/* CS 3 Mask reg (r/w) */
-#define	MCFSIM_CSCR3		0x92		/* CS 3 Control reg (r/w) */
-#define	MCFSIM_CSAR4		0x94		/* CS 4 Address reg (r/w) */
-#define	MCFSIM_CSMR4		0x98		/* CS 4 Mask reg (r/w) */
-#define	MCFSIM_CSCR4		0x9e		/* CS 4 Control reg (r/w) */
-#define	MCFSIM_CSAR5		0xa0		/* CS 5 Address reg (r/w) */
-#define	MCFSIM_CSMR5		0xa4		/* CS 5 Mask reg (r/w) */
-#define	MCFSIM_CSCR5		0xaa		/* CS 5 Control reg (r/w) */
-#define	MCFSIM_CSAR6		0xac		/* CS 6 Address reg (r/w) */
-#define	MCFSIM_CSMR6		0xb0		/* CS 6 Mask reg (r/w) */
-#define	MCFSIM_CSCR6		0xb6		/* CS 6 Control reg (r/w) */
-#define	MCFSIM_CSAR7		0xb8		/* CS 7 Address reg (r/w) */
-#define	MCFSIM_CSMR7		0xbc		/* CS 7 Mask reg (r/w) */
-#define	MCFSIM_CSCR7		0xc2		/* CS 7 Control reg (r/w) */
-#define	MCFSIM_DMCR		0xc6		/* Default control */
-
-#ifdef CONFIG_M5206e
-#define	MCFSIM_PAR		0xca		/* Pin Assignment reg (r/w) */
-#else
-#define	MCFSIM_PAR		0xcb		/* Pin Assignment reg (r/w) */
-#endif
-
-#define	MCFTIMER_BASE1		(MCF_MBAR + 0x100)	/* Base of TIMER1 */
-#define	MCFTIMER_BASE2		(MCF_MBAR + 0x120)	/* Base of TIMER2 */
-
-#define	MCFSIM_PADDR		(MCF_MBAR + 0x1c5)	/* Parallel Direction (r/w) */
-#define	MCFSIM_PADAT		(MCF_MBAR + 0x1c9)	/* Parallel Port Value (r/w) */
-
-#define	MCFDMA_BASE0		(MCF_MBAR + 0x200)	/* Base address DMA 0 */
-#define	MCFDMA_BASE1		(MCF_MBAR + 0x240)	/* Base address DMA 1 */
-
-#if defined(CONFIG_NETtel)
-#define	MCFUART_BASE0		(MCF_MBAR + 0x180)	/* Base address UART0 */
-#define	MCFUART_BASE1		(MCF_MBAR + 0x140)	/* Base address UART1 */
-#else
-#define	MCFUART_BASE0		(MCF_MBAR + 0x140)	/* Base address UART0 */
-#define	MCFUART_BASE1		(MCF_MBAR + 0x180)	/* Base address UART1 */
-#endif
-
-/*
- *	Define system peripheral IRQ usage.
- */
-#define	MCF_IRQ_TIMER		30		/* Timer0, Level 6 */
-#define	MCF_IRQ_PROFILER	31		/* Timer1, Level 7 */
-#define	MCF_IRQ_UART0		73		/* UART0 */
-#define	MCF_IRQ_UART1		74		/* UART1 */
-
-/*
- *	Generic GPIO
- */
-#define MCFGPIO_PIN_MAX		8
-#define MCFGPIO_IRQ_VECBASE	-1
-#define MCFGPIO_IRQ_MAX		-1
-
-/*
- *	Some symbol defines for the Parallel Port Pin Assignment Register
- */
-#ifdef CONFIG_M5206e
-#define MCFSIM_PAR_DREQ0        0x100           /* Set to select DREQ0 input */
-                                                /* Clear to select T0 input */
-#define MCFSIM_PAR_DREQ1        0x200           /* Select DREQ1 input */
-                                                /* Clear to select T0 output */
-#endif
-
-/*
- *	Some symbol defines for the Interrupt Control Register
- */
-#define	MCFSIM_SWDICR		MCFSIM_ICR8	/* Watchdog timer ICR */
-#define	MCFSIM_TIMER1ICR	MCFSIM_ICR9	/* Timer 1 ICR */
-#define	MCFSIM_TIMER2ICR	MCFSIM_ICR10	/* Timer 2 ICR */
-#define	MCFSIM_UART1ICR		MCFSIM_ICR12	/* UART 1 ICR */
-#define	MCFSIM_UART2ICR		MCFSIM_ICR13	/* UART 2 ICR */
-#ifdef CONFIG_M5206e
-#define	MCFSIM_DMA1ICR		MCFSIM_ICR14	/* DMA 1 ICR */
-#define	MCFSIM_DMA2ICR		MCFSIM_ICR15	/* DMA 2 ICR */
-#endif
-
-/****************************************************************************/
-#endif	/* m5206sim_h */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/m520xsim.h b/ANDROID_3.4.5/arch/m68k/include/asm/m520xsim.h
deleted file mode 100644
index 17f2aab9..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/m520xsim.h
+++ /dev/null
@@ -1,190 +0,0 @@
-/****************************************************************************/
-
-/*
- *  m520xsim.h -- ColdFire 5207/5208 System Integration Module support.
- *
- *  (C) Copyright 2005, Intec Automation (mike@steroidmicros.com)
- */
-
-/****************************************************************************/
-#ifndef m520xsim_h
-#define m520xsim_h
-/****************************************************************************/
-
-#define	CPU_NAME		"COLDFIRE(m520x)"
-#define	CPU_INSTR_PER_JIFFY	3
-#define	MCF_BUSCLK		(MCF_CLK / 2)
-
-#include <asm/m52xxacr.h>
-
-/*
- *  Define the 520x SIM register set addresses.
- */
-#define MCFICM_INTC0        0xFC048000  /* Base for Interrupt Ctrl 0 */
-#define MCFINTC_IPRH        0x00        /* Interrupt pending 32-63 */
-#define MCFINTC_IPRL        0x04        /* Interrupt pending 1-31 */
-#define MCFINTC_IMRH        0x08        /* Interrupt mask 32-63 */
-#define MCFINTC_IMRL        0x0c        /* Interrupt mask 1-31 */
-#define MCFINTC_INTFRCH     0x10        /* Interrupt force 32-63 */
-#define MCFINTC_INTFRCL     0x14        /* Interrupt force 1-31 */
-#define MCFINTC_SIMR        0x1c        /* Set interrupt mask 0-63 */
-#define MCFINTC_CIMR        0x1d        /* Clear interrupt mask 0-63 */
-#define MCFINTC_ICR0        0x40        /* Base ICR register */
-
-/*
- *  The common interrupt controller code just wants to know the absolute
- *  address to the SIMR and CIMR registers (not offsets into IPSBAR).
- *  The 520x family only has a single INTC unit.
- */
-#define MCFINTC0_SIMR       (MCFICM_INTC0 + MCFINTC_SIMR)
-#define MCFINTC0_CIMR       (MCFICM_INTC0 + MCFINTC_CIMR)
-#define	MCFINTC0_ICR0       (MCFICM_INTC0 + MCFINTC_ICR0)
-#define MCFINTC1_SIMR       (0)
-#define MCFINTC1_CIMR       (0)
-#define	MCFINTC1_ICR0       (0)
-
-#define MCFINT_VECBASE      64
-#define MCFINT_UART0        26          /* Interrupt number for UART0 */
-#define MCFINT_UART1        27          /* Interrupt number for UART1 */
-#define MCFINT_UART2        28          /* Interrupt number for UART2 */
-#define MCFINT_QSPI         31          /* Interrupt number for QSPI */
-#define MCFINT_FECRX0	    36		/* Interrupt number for FEC RX */
-#define MCFINT_FECTX0	    40		/* Interrupt number for FEC RX */
-#define MCFINT_FECENTC0	    42		/* Interrupt number for FEC RX */
-#define MCFINT_PIT1         4           /* Interrupt number for PIT1 (PIT0 in processor) */
-
-#define MCF_IRQ_UART0	    (MCFINT_VECBASE + MCFINT_UART0)
-#define MCF_IRQ_UART1	    (MCFINT_VECBASE + MCFINT_UART1)
-#define MCF_IRQ_UART2	    (MCFINT_VECBASE + MCFINT_UART2)
-
-#define MCF_IRQ_FECRX0	    (MCFINT_VECBASE + MCFINT_FECRX0)
-#define MCF_IRQ_FECTX0	    (MCFINT_VECBASE + MCFINT_FECTX0)
-#define MCF_IRQ_FECENTC0    (MCFINT_VECBASE + MCFINT_FECENTC0)
-
-#define	MCF_IRQ_QSPI	    (MCFINT_VECBASE + MCFINT_QSPI)
-
-/*
- *  SDRAM configuration registers.
- */
-#define MCFSIM_SDMR         0xFC0a8000	/* SDRAM Mode/Extended Mode Register */
-#define MCFSIM_SDCR         0xFC0a8004	/* SDRAM Control Register */
-#define MCFSIM_SDCFG1       0xFC0a8008	/* SDRAM Configuration Register 1 */
-#define MCFSIM_SDCFG2       0xFC0a800c	/* SDRAM Configuration Register 2 */
-#define MCFSIM_SDCS0        0xFC0a8110	/* SDRAM Chip Select 0 Configuration */
-#define MCFSIM_SDCS1        0xFC0a8114	/* SDRAM Chip Select 1 Configuration */
-
-/*
- * EPORT and GPIO registers.
- */
-#define MCFEPORT_EPPAR			0xFC088000
-#define MCFEPORT_EPDDR			0xFC088002
-#define MCFEPORT_EPIER			0xFC088003
-#define MCFEPORT_EPDR			0xFC088004
-#define MCFEPORT_EPPDR			0xFC088005
-#define MCFEPORT_EPFR			0xFC088006
-
-#define MCFGPIO_PODR_BUSCTL		0xFC0A4000
-#define MCFGPIO_PODR_BE			0xFC0A4001
-#define MCFGPIO_PODR_CS			0xFC0A4002
-#define MCFGPIO_PODR_FECI2C		0xFC0A4003
-#define MCFGPIO_PODR_QSPI		0xFC0A4004
-#define MCFGPIO_PODR_TIMER		0xFC0A4005
-#define MCFGPIO_PODR_UART		0xFC0A4006
-#define MCFGPIO_PODR_FECH		0xFC0A4007
-#define MCFGPIO_PODR_FECL		0xFC0A4008
-
-#define MCFGPIO_PDDR_BUSCTL		0xFC0A400C
-#define MCFGPIO_PDDR_BE			0xFC0A400D
-#define MCFGPIO_PDDR_CS			0xFC0A400E
-#define MCFGPIO_PDDR_FECI2C		0xFC0A400F
-#define MCFGPIO_PDDR_QSPI		0xFC0A4010
-#define MCFGPIO_PDDR_TIMER		0xFC0A4011
-#define MCFGPIO_PDDR_UART		0xFC0A4012
-#define MCFGPIO_PDDR_FECH		0xFC0A4013
-#define MCFGPIO_PDDR_FECL		0xFC0A4014
-
-#define MCFGPIO_PPDSDR_CS		0xFC0A401A
-#define MCFGPIO_PPDSDR_FECI2C		0xFC0A401B
-#define MCFGPIO_PPDSDR_QSPI		0xFC0A401C
-#define MCFGPIO_PPDSDR_TIMER		0xFC0A401D
-#define MCFGPIO_PPDSDR_UART		0xFC0A401E
-#define MCFGPIO_PPDSDR_FECH		0xFC0A401F
-#define MCFGPIO_PPDSDR_FECL		0xFC0A4020
-
-#define MCFGPIO_PCLRR_BUSCTL		0xFC0A4024
-#define MCFGPIO_PCLRR_BE		0xFC0A4025
-#define MCFGPIO_PCLRR_CS		0xFC0A4026
-#define MCFGPIO_PCLRR_FECI2C		0xFC0A4027
-#define MCFGPIO_PCLRR_QSPI		0xFC0A4028
-#define MCFGPIO_PCLRR_TIMER		0xFC0A4029
-#define MCFGPIO_PCLRR_UART		0xFC0A402A
-#define MCFGPIO_PCLRR_FECH		0xFC0A402B
-#define MCFGPIO_PCLRR_FECL		0xFC0A402C
-
-/*
- * Generic GPIO support
- */
-#define MCFGPIO_PODR			MCFGPIO_PODR_CS
-#define MCFGPIO_PDDR			MCFGPIO_PDDR_CS
-#define MCFGPIO_PPDR			MCFGPIO_PPDSDR_CS
-#define MCFGPIO_SETR			MCFGPIO_PPDSDR_CS
-#define MCFGPIO_CLRR			MCFGPIO_PCLRR_CS
-
-#define MCFGPIO_PIN_MAX			80
-#define MCFGPIO_IRQ_MAX			8
-#define MCFGPIO_IRQ_VECBASE		MCFINT_VECBASE
-
-#define MCF_GPIO_PAR_UART		0xFC0A4036
-#define MCF_GPIO_PAR_FECI2C		0xFC0A4033
-#define MCF_GPIO_PAR_QSPI		0xFC0A4034
-#define MCF_GPIO_PAR_FEC		0xFC0A4038
-
-#define MCF_GPIO_PAR_UART_PAR_URXD0         (0x0001)
-#define MCF_GPIO_PAR_UART_PAR_UTXD0         (0x0002)
-
-#define MCF_GPIO_PAR_UART_PAR_URXD1         (0x0040)
-#define MCF_GPIO_PAR_UART_PAR_UTXD1         (0x0080)
-
-#define MCF_GPIO_PAR_FECI2C_PAR_SDA_URXD2   (0x02)
-#define MCF_GPIO_PAR_FECI2C_PAR_SCL_UTXD2   (0x04)
-
-/*
- *  PIT timer module.
- */
-#define	MCFPIT_BASE1		0xFC080000	/* Base address of TIMER1 */
-#define	MCFPIT_BASE2		0xFC084000	/* Base address of TIMER2 */
-
-/*
- *  UART module.
- */
-#define MCFUART_BASE0		0xFC060000	/* Base address of UART0 */
-#define MCFUART_BASE1		0xFC064000	/* Base address of UART1 */
-#define MCFUART_BASE2		0xFC068000	/* Base address of UART2 */
-
-/*
- *  FEC module.
- */
-#define	MCFFEC_BASE0		0xFC030000	/* Base of FEC ethernet */
-#define	MCFFEC_SIZE0		0x800		/* Register set size */
-
-/*
- *  QSPI module.
- */
-#define	MCFQSPI_BASE		0xFC05C000	/* Base of QSPI module */
-#define	MCFQSPI_SIZE		0x40		/* Register set size */
-
-#define	MCFQSPI_CS0		46
-#define	MCFQSPI_CS1		47
-#define	MCFQSPI_CS2		27
-
-/*
- *  Reset Control Unit.
- */
-#define	MCF_RCR			0xFC0A0000
-#define	MCF_RSR			0xFC0A0001
-
-#define	MCF_RCR_SWRESET		0x80		/* Software reset bit */
-#define	MCF_RCR_FRCSTOUT	0x40		/* Force external reset */
-
-/****************************************************************************/
-#endif  /* m520xsim_h */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/m523xsim.h b/ANDROID_3.4.5/arch/m68k/include/asm/m523xsim.h
deleted file mode 100644
index 075062d4..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/m523xsim.h
+++ /dev/null
@@ -1,203 +0,0 @@
-/****************************************************************************/
-
-/*
- *	m523xsim.h -- ColdFire 523x System Integration Module support.
- *
- *	(C) Copyright 2003-2005, Greg Ungerer <gerg@snapgear.com>
- */
-
-/****************************************************************************/
-#ifndef	m523xsim_h
-#define	m523xsim_h
-/****************************************************************************/
-
-#define	CPU_NAME		"COLDFIRE(m523x)"
-#define	CPU_INSTR_PER_JIFFY	3
-#define	MCF_BUSCLK		(MCF_CLK / 2)
-
-#include <asm/m52xxacr.h>
-
-/*
- *	Define the 523x SIM register set addresses.
- */
-#define	MCFICM_INTC0		(MCF_IPSBAR + 0x0c00)	/* Base for Interrupt Ctrl 0 */
-#define	MCFICM_INTC1		(MCF_IPSBAR + 0x0d00)	/* Base for Interrupt Ctrl 0 */
-
-#define	MCFINTC_IPRH		0x00		/* Interrupt pending 32-63 */
-#define	MCFINTC_IPRL		0x04		/* Interrupt pending 1-31 */
-#define	MCFINTC_IMRH		0x08		/* Interrupt mask 32-63 */
-#define	MCFINTC_IMRL		0x0c		/* Interrupt mask 1-31 */
-#define	MCFINTC_INTFRCH		0x10		/* Interrupt force 32-63 */
-#define	MCFINTC_INTFRCL		0x14		/* Interrupt force 1-31 */
-#define	MCFINTC_IRLR		0x18		/* */
-#define	MCFINTC_IACKL		0x19		/* */
-#define	MCFINTC_ICR0		0x40		/* Base ICR register */
-
-#define	MCFINT_VECBASE		64		/* Vector base number */
-#define	MCFINT_UART0		13		/* Interrupt number for UART0 */
-#define	MCFINT_UART1		14		/* Interrupt number for UART1 */
-#define	MCFINT_UART2		15		/* Interrupt number for UART2 */
-#define MCFINT_QSPI		18		/* Interrupt number for QSPI */
-#define	MCFINT_FECRX0		23		/* Interrupt number for FEC */
-#define	MCFINT_FECTX0		27		/* Interrupt number for FEC */
-#define	MCFINT_FECENTC0		29		/* Interrupt number for FEC */
-#define	MCFINT_PIT1		36		/* Interrupt number for PIT1 */
-
-#define	MCF_IRQ_UART0	        (MCFINT_VECBASE + MCFINT_UART0)
-#define	MCF_IRQ_UART1	        (MCFINT_VECBASE + MCFINT_UART1)
-#define	MCF_IRQ_UART2	        (MCFINT_VECBASE + MCFINT_UART2)
-
-#define	MCF_IRQ_FECRX0		(MCFINT_VECBASE + MCFINT_FECRX0)
-#define	MCF_IRQ_FECTX0		(MCFINT_VECBASE + MCFINT_FECTX0)
-#define	MCF_IRQ_FECENTC0	(MCFINT_VECBASE + MCFINT_FECENTC0)
-
-#define	MCF_IRQ_QSPI		(MCFINT_VECBASE + MCFINT_QSPI)
-
-/*
- *	SDRAM configuration registers.
- */
-#define	MCFSIM_DCR		(MCF_IPSBAR + 0x44)	/* Control */
-#define	MCFSIM_DACR0		(MCF_IPSBAR + 0x48)	/* Base address 0 */
-#define	MCFSIM_DMR0		(MCF_IPSBAR + 0x4c)	/* Address mask 0 */
-#define	MCFSIM_DACR1		(MCF_IPSBAR + 0x50)	/* Base address 1 */
-#define	MCFSIM_DMR1		(MCF_IPSBAR + 0x54)	/* Address mask 1 */
-
-/*
- *  Reset Control Unit (relative to IPSBAR).
- */
-#define	MCF_RCR			(MCF_IPSBAR + 0x110000)
-#define	MCF_RSR			(MCF_IPSBAR + 0x110001)
-
-#define	MCF_RCR_SWRESET		0x80		/* Software reset bit */
-#define	MCF_RCR_FRCSTOUT	0x40		/* Force external reset */
-
-/*
- *  UART module.
- */
-#define MCFUART_BASE0		(MCF_IPSBAR + 0x200)
-#define MCFUART_BASE1		(MCF_IPSBAR + 0x240)
-#define MCFUART_BASE2		(MCF_IPSBAR + 0x280)
-
-/*
- *  FEC ethernet module.
- */
-#define	MCFFEC_BASE0		(MCF_IPSBAR + 0x1000)
-#define	MCFFEC_SIZE0		0x800
-
-/*
- *  QSPI module.
- */
-#define	MCFQSPI_BASE		(MCF_IPSBAR + 0x340)
-#define	MCFQSPI_SIZE		0x40
-
-#define	MCFQSPI_CS0		91
-#define	MCFQSPI_CS1		92
-#define	MCFQSPI_CS2		103
-#define	MCFQSPI_CS3		99
-
-/*
- *  GPIO module.
- */
-#define MCFGPIO_PODR_ADDR	(MCF_IPSBAR + 0x100000)
-#define MCFGPIO_PODR_DATAH	(MCF_IPSBAR + 0x100001)
-#define MCFGPIO_PODR_DATAL	(MCF_IPSBAR + 0x100002)
-#define MCFGPIO_PODR_BUSCTL	(MCF_IPSBAR + 0x100003)
-#define MCFGPIO_PODR_BS		(MCF_IPSBAR + 0x100004)
-#define MCFGPIO_PODR_CS		(MCF_IPSBAR + 0x100005)
-#define MCFGPIO_PODR_SDRAM	(MCF_IPSBAR + 0x100006)
-#define MCFGPIO_PODR_FECI2C	(MCF_IPSBAR + 0x100007)
-#define MCFGPIO_PODR_UARTH	(MCF_IPSBAR + 0x100008)
-#define MCFGPIO_PODR_UARTL	(MCF_IPSBAR + 0x100009)
-#define MCFGPIO_PODR_QSPI	(MCF_IPSBAR + 0x10000A)
-#define MCFGPIO_PODR_TIMER	(MCF_IPSBAR + 0x10000B)
-#define MCFGPIO_PODR_ETPU	(MCF_IPSBAR + 0x10000C)
-
-#define MCFGPIO_PDDR_ADDR	(MCF_IPSBAR + 0x100010)
-#define MCFGPIO_PDDR_DATAH	(MCF_IPSBAR + 0x100011)
-#define MCFGPIO_PDDR_DATAL	(MCF_IPSBAR + 0x100012)
-#define MCFGPIO_PDDR_BUSCTL	(MCF_IPSBAR + 0x100013)
-#define MCFGPIO_PDDR_BS		(MCF_IPSBAR + 0x100014)
-#define MCFGPIO_PDDR_CS		(MCF_IPSBAR + 0x100015)
-#define MCFGPIO_PDDR_SDRAM	(MCF_IPSBAR + 0x100016)
-#define MCFGPIO_PDDR_FECI2C	(MCF_IPSBAR + 0x100017)
-#define MCFGPIO_PDDR_UARTH	(MCF_IPSBAR + 0x100018)
-#define MCFGPIO_PDDR_UARTL	(MCF_IPSBAR + 0x100019)
-#define MCFGPIO_PDDR_QSPI	(MCF_IPSBAR + 0x10001A)
-#define MCFGPIO_PDDR_TIMER	(MCF_IPSBAR + 0x10001B)
-#define MCFGPIO_PDDR_ETPU	(MCF_IPSBAR + 0x10001C)
-
-#define MCFGPIO_PPDSDR_ADDR	(MCF_IPSBAR + 0x100020)
-#define MCFGPIO_PPDSDR_DATAH	(MCF_IPSBAR + 0x100021)
-#define MCFGPIO_PPDSDR_DATAL	(MCF_IPSBAR + 0x100022)
-#define MCFGPIO_PPDSDR_BUSCTL	(MCF_IPSBAR + 0x100023)
-#define MCFGPIO_PPDSDR_BS	(MCF_IPSBAR + 0x100024)
-#define MCFGPIO_PPDSDR_CS	(MCF_IPSBAR + 0x100025)
-#define MCFGPIO_PPDSDR_SDRAM	(MCF_IPSBAR + 0x100026)
-#define MCFGPIO_PPDSDR_FECI2C	(MCF_IPSBAR + 0x100027)
-#define MCFGPIO_PPDSDR_UARTH	(MCF_IPSBAR + 0x100028)
-#define MCFGPIO_PPDSDR_UARTL	(MCF_IPSBAR + 0x100029)
-#define MCFGPIO_PPDSDR_QSPI	(MCF_IPSBAR + 0x10002A)
-#define MCFGPIO_PPDSDR_TIMER	(MCF_IPSBAR + 0x10002B)
-#define MCFGPIO_PPDSDR_ETPU	(MCF_IPSBAR + 0x10002C)
-
-#define MCFGPIO_PCLRR_ADDR	(MCF_IPSBAR + 0x100030)
-#define MCFGPIO_PCLRR_DATAH	(MCF_IPSBAR + 0x100031)
-#define MCFGPIO_PCLRR_DATAL	(MCF_IPSBAR + 0x100032)
-#define MCFGPIO_PCLRR_BUSCTL	(MCF_IPSBAR + 0x100033)
-#define MCFGPIO_PCLRR_BS	(MCF_IPSBAR + 0x100034)
-#define MCFGPIO_PCLRR_CS	(MCF_IPSBAR + 0x100035)
-#define MCFGPIO_PCLRR_SDRAM	(MCF_IPSBAR + 0x100036)
-#define MCFGPIO_PCLRR_FECI2C	(MCF_IPSBAR + 0x100037)
-#define MCFGPIO_PCLRR_UARTH	(MCF_IPSBAR + 0x100038)
-#define MCFGPIO_PCLRR_UARTL	(MCF_IPSBAR + 0x100039)
-#define MCFGPIO_PCLRR_QSPI	(MCF_IPSBAR + 0x10003A)
-#define MCFGPIO_PCLRR_TIMER	(MCF_IPSBAR + 0x10003B)
-#define MCFGPIO_PCLRR_ETPU	(MCF_IPSBAR + 0x10003C)
-
-/*
- * PIT timer base addresses.
- */
-#define	MCFPIT_BASE1		(MCF_IPSBAR + 0x150000)
-#define	MCFPIT_BASE2		(MCF_IPSBAR + 0x160000)
-#define	MCFPIT_BASE3		(MCF_IPSBAR + 0x170000)
-#define	MCFPIT_BASE4		(MCF_IPSBAR + 0x180000)
-
-/*
- * EPort
- */
-#define MCFEPORT_EPPAR		(MCF_IPSBAR + 0x130000)
-#define MCFEPORT_EPDDR		(MCF_IPSBAR + 0x130002)
-#define MCFEPORT_EPIER		(MCF_IPSBAR + 0x130003)
-#define MCFEPORT_EPDR		(MCF_IPSBAR + 0x130004)
-#define MCFEPORT_EPPDR		(MCF_IPSBAR + 0x130005)
-#define MCFEPORT_EPFR		(MCF_IPSBAR + 0x130006)
-
-/*
- * Generic GPIO support
- */
-#define MCFGPIO_PODR			MCFGPIO_PODR_ADDR
-#define MCFGPIO_PDDR			MCFGPIO_PDDR_ADDR
-#define MCFGPIO_PPDR			MCFGPIO_PPDSDR_ADDR
-#define MCFGPIO_SETR			MCFGPIO_PPDSDR_ADDR
-#define MCFGPIO_CLRR			MCFGPIO_PCLRR_ADDR
-
-#define MCFGPIO_PIN_MAX			107
-#define MCFGPIO_IRQ_MAX			8
-#define MCFGPIO_IRQ_VECBASE		MCFINT_VECBASE
-
-/*
- * Pin Assignment
-*/
-#define	MCFGPIO_PAR_QSPI	(MCF_IPSBAR + 0x10004A)
-#define	MCFGPIO_PAR_TIMER	(MCF_IPSBAR + 0x10004C)
-
-/*
- * DMA unit base addresses.
- */
-#define	MCFDMA_BASE0		(MCF_IPSBAR + 0x100)
-#define	MCFDMA_BASE1		(MCF_IPSBAR + 0x140)
-#define	MCFDMA_BASE2		(MCF_IPSBAR + 0x180)
-#define	MCFDMA_BASE3		(MCF_IPSBAR + 0x1C0)
-
-/****************************************************************************/
-#endif	/* m523xsim_h */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/m5249sim.h b/ANDROID_3.4.5/arch/m68k/include/asm/m5249sim.h
deleted file mode 100644
index 7f0c2c36..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/m5249sim.h
+++ /dev/null
@@ -1,269 +0,0 @@
-/****************************************************************************/
-
-/*
- *	m5249sim.h -- ColdFire 5249 System Integration Module support.
- *
- *	(C) Copyright 2002, Greg Ungerer (gerg@snapgear.com)
- */
-
-/****************************************************************************/
-#ifndef	m5249sim_h
-#define	m5249sim_h
-/****************************************************************************/
-
-#define	CPU_NAME		"COLDFIRE(m5249)"
-#define	CPU_INSTR_PER_JIFFY	3
-#define	MCF_BUSCLK		(MCF_CLK / 2)
-
-#include <asm/m52xxacr.h>
-
-/*
- *	The 5249 has a second MBAR region, define its address.
- */
-#define MCF_MBAR2		0x80000000
-
-/*
- *	Define the 5249 SIM register set addresses.
- */
-#define	MCFSIM_RSR		0x00		/* Reset Status reg (r/w) */
-#define	MCFSIM_SYPCR		0x01		/* System Protection reg (r/w)*/
-#define	MCFSIM_SWIVR		0x02		/* SW Watchdog intr reg (r/w) */
-#define	MCFSIM_SWSR		0x03		/* SW Watchdog service (r/w) */
-#define	MCFSIM_PAR		0x04		/* Pin Assignment reg (r/w) */
-#define	MCFSIM_IRQPAR		0x06		/* Interrupt Assignment reg (r/w) */
-#define	MCFSIM_MPARK		0x0C		/* BUS Master Control Reg*/
-#define	MCFSIM_IPR		0x40		/* Interrupt Pend reg (r/w) */
-#define	MCFSIM_IMR		0x44		/* Interrupt Mask reg (r/w) */
-#define	MCFSIM_AVR		0x4b		/* Autovector Ctrl reg (r/w) */
-#define	MCFSIM_ICR0		0x4c		/* Intr Ctrl reg 0 (r/w) */
-#define	MCFSIM_ICR1		0x4d		/* Intr Ctrl reg 1 (r/w) */
-#define	MCFSIM_ICR2		0x4e		/* Intr Ctrl reg 2 (r/w) */
-#define	MCFSIM_ICR3		0x4f		/* Intr Ctrl reg 3 (r/w) */
-#define	MCFSIM_ICR4		0x50		/* Intr Ctrl reg 4 (r/w) */
-#define	MCFSIM_ICR5		0x51		/* Intr Ctrl reg 5 (r/w) */
-#define	MCFSIM_ICR6		0x52		/* Intr Ctrl reg 6 (r/w) */
-#define	MCFSIM_ICR7		0x53		/* Intr Ctrl reg 7 (r/w) */
-#define	MCFSIM_ICR8		0x54		/* Intr Ctrl reg 8 (r/w) */
-#define	MCFSIM_ICR9		0x55		/* Intr Ctrl reg 9 (r/w) */
-#define	MCFSIM_ICR10		0x56		/* Intr Ctrl reg 10 (r/w) */
-#define	MCFSIM_ICR11		0x57		/* Intr Ctrl reg 11 (r/w) */
-
-#define MCFSIM_CSAR0		0x80		/* CS 0 Address 0 reg (r/w) */
-#define MCFSIM_CSMR0		0x84		/* CS 0 Mask 0 reg (r/w) */
-#define MCFSIM_CSCR0		0x8a		/* CS 0 Control reg (r/w) */
-#define MCFSIM_CSAR1		0x8c		/* CS 1 Address reg (r/w) */
-#define MCFSIM_CSMR1		0x90		/* CS 1 Mask reg (r/w) */
-#define MCFSIM_CSCR1		0x96		/* CS 1 Control reg (r/w) */
-#define MCFSIM_CSAR2		0x98		/* CS 2 Address reg (r/w) */
-#define MCFSIM_CSMR2		0x9c		/* CS 2 Mask reg (r/w) */
-#define MCFSIM_CSCR2		0xa2		/* CS 2 Control reg (r/w) */
-#define MCFSIM_CSAR3		0xa4		/* CS 3 Address reg (r/w) */
-#define MCFSIM_CSMR3		0xa8		/* CS 3 Mask reg (r/w) */
-#define MCFSIM_CSCR3		0xae		/* CS 3 Control reg (r/w) */
-
-#define MCFSIM_DCR		(MCF_MBAR + 0x100)	/* DRAM Control */
-#define MCFSIM_DACR0		(MCF_MBAR + 0x108)	/* DRAM 0 Addr/Ctrl */
-#define MCFSIM_DMR0		(MCF_MBAR + 0x10c)	/* DRAM 0 Mask */
-#define MCFSIM_DACR1		(MCF_MBAR + 0x110)	/* DRAM 1 Addr/Ctrl */
-#define MCFSIM_DMR1		(MCF_MBAR + 0x114)	/* DRAM 1 Mask */
-
-/*
- *	Timer module.
- */
-#define MCFTIMER_BASE1		(MCF_MBAR + 0x140)	/* Base of TIMER1 */
-#define MCFTIMER_BASE2		(MCF_MBAR + 0x180)	/* Base of TIMER2 */
-
-/*
- *	UART module.
- */
-#define MCFUART_BASE0		(MCF_MBAR + 0x1c0)	/* Base address UART0 */
-#define MCFUART_BASE1		(MCF_MBAR + 0x200)	/* Base address UART1 */
-
-/*
- *	QSPI module.
- */
-#define	MCFQSPI_BASE		(MCF_MBAR + 0x300)	/* Base address QSPI */
-#define	MCFQSPI_SIZE		0x40			/* Register set size */
-
-#define	MCFQSPI_CS0		29
-#define	MCFQSPI_CS1		24
-#define	MCFQSPI_CS2		21
-#define	MCFQSPI_CS3		22
-
-/*
- *	DMA unit base addresses.
- */
-#define MCFDMA_BASE0		(MCF_MBAR + 0x300)	/* Base address DMA 0 */
-#define MCFDMA_BASE1		(MCF_MBAR + 0x340)	/* Base address DMA 1 */
-#define MCFDMA_BASE2		(MCF_MBAR + 0x380)	/* Base address DMA 2 */
-#define MCFDMA_BASE3		(MCF_MBAR + 0x3C0)	/* Base address DMA 3 */
-
-/*
- *	Some symbol defines for the above...
- */
-#define	MCFSIM_SWDICR		MCFSIM_ICR0	/* Watchdog timer ICR */
-#define	MCFSIM_TIMER1ICR	MCFSIM_ICR1	/* Timer 1 ICR */
-#define	MCFSIM_TIMER2ICR	MCFSIM_ICR2	/* Timer 2 ICR */
-#define	MCFSIM_UART1ICR		MCFSIM_ICR4	/* UART 1 ICR */
-#define	MCFSIM_UART2ICR		MCFSIM_ICR5	/* UART 2 ICR */
-#define	MCFSIM_DMA0ICR		MCFSIM_ICR6	/* DMA 0 ICR */
-#define	MCFSIM_DMA1ICR		MCFSIM_ICR7	/* DMA 1 ICR */
-#define	MCFSIM_DMA2ICR		MCFSIM_ICR8	/* DMA 2 ICR */
-#define	MCFSIM_DMA3ICR		MCFSIM_ICR9	/* DMA 3 ICR */
-#define	MCFSIM_QSPIICR		MCFSIM_ICR10	/* QSPI ICR */
-
-/*
- *	Define system peripheral IRQ usage.
- */
-#define	MCF_IRQ_QSPI		28		/* QSPI, Level 4 */
-#define	MCF_IRQ_TIMER		30		/* Timer0, Level 6 */
-#define	MCF_IRQ_PROFILER	31		/* Timer1, Level 7 */
-
-#define	MCF_IRQ_UART0		73		/* UART0 */
-#define	MCF_IRQ_UART1		74		/* UART1 */
-
-/*
- *	General purpose IO registers (in MBAR2).
- */
-#define	MCFSIM2_GPIOREAD	(MCF_MBAR2 + 0x000)	/* GPIO read values */
-#define	MCFSIM2_GPIOWRITE	(MCF_MBAR2 + 0x004)	/* GPIO write values */
-#define	MCFSIM2_GPIOENABLE	(MCF_MBAR2 + 0x008)	/* GPIO enabled */
-#define	MCFSIM2_GPIOFUNC	(MCF_MBAR2 + 0x00C)	/* GPIO function */
-#define	MCFSIM2_GPIO1READ	(MCF_MBAR2 + 0x0B0)	/* GPIO1 read values */
-#define	MCFSIM2_GPIO1WRITE	(MCF_MBAR2 + 0x0B4)	/* GPIO1 write values */
-#define	MCFSIM2_GPIO1ENABLE	(MCF_MBAR2 + 0x0B8)	/* GPIO1 enabled */
-#define	MCFSIM2_GPIO1FUNC	(MCF_MBAR2 + 0x0BC)	/* GPIO1 function */
-
-#define	MCFSIM2_GPIOINTSTAT	0xc0		/* GPIO interrupt status */
-#define	MCFSIM2_GPIOINTCLEAR	0xc0		/* GPIO interrupt clear */
-#define	MCFSIM2_GPIOINTENABLE	0xc4		/* GPIO interrupt enable */
-
-#define	MCFSIM2_INTLEVEL1	0x140		/* Interrupt level reg 1 */
-#define	MCFSIM2_INTLEVEL2	0x144		/* Interrupt level reg 2 */
-#define	MCFSIM2_INTLEVEL3	0x148		/* Interrupt level reg 3 */
-#define	MCFSIM2_INTLEVEL4	0x14c		/* Interrupt level reg 4 */
-#define	MCFSIM2_INTLEVEL5	0x150		/* Interrupt level reg 5 */
-#define	MCFSIM2_INTLEVEL6	0x154		/* Interrupt level reg 6 */
-#define	MCFSIM2_INTLEVEL7	0x158		/* Interrupt level reg 7 */
-#define	MCFSIM2_INTLEVEL8	0x15c		/* Interrupt level reg 8 */
-
-#define	MCFSIM2_DMAROUTE	0x188		/* DMA routing */
-
-#define	MCFSIM2_IDECONFIG1	0x18c		/* IDEconfig1 */
-#define	MCFSIM2_IDECONFIG2	0x190		/* IDEconfig2 */
-
-/*
- * Define the base interrupt for the second interrupt controller.
- * We set it to 128, out of the way of the base interrupts, and plenty
- * of room for its 64 interrupts.
- */
-#define	MCFINTC2_VECBASE	128
-
-#define	MCFINTC2_GPIOIRQ0	(MCFINTC2_VECBASE + 32)
-#define	MCFINTC2_GPIOIRQ1	(MCFINTC2_VECBASE + 33)
-#define	MCFINTC2_GPIOIRQ2	(MCFINTC2_VECBASE + 34)
-#define	MCFINTC2_GPIOIRQ3	(MCFINTC2_VECBASE + 35)
-#define	MCFINTC2_GPIOIRQ4	(MCFINTC2_VECBASE + 36)
-#define	MCFINTC2_GPIOIRQ5	(MCFINTC2_VECBASE + 37)
-#define	MCFINTC2_GPIOIRQ6	(MCFINTC2_VECBASE + 38)
-#define	MCFINTC2_GPIOIRQ7	(MCFINTC2_VECBASE + 39)
-
-/*
- * Generic GPIO support
- */
-#define MCFGPIO_PIN_MAX		64
-#define MCFGPIO_IRQ_MAX		-1
-#define MCFGPIO_IRQ_VECBASE	-1
-
-/****************************************************************************/
-
-#ifdef __ASSEMBLER__
-
-/*
- *	The M5249C3 board needs a little help getting all its SIM devices
- *	initialized at kernel start time. dBUG doesn't set much up, so
- *	we need to do it manually.
- */
-.macro m5249c3_setup
-	/*
-	 *	Set MBAR1 and MBAR2, just incase they are not set.
-	 */
-	movel	#0x10000001,%a0
-	movec	%a0,%MBAR			/* map MBAR region */
-	subql	#1,%a0				/* get MBAR address in a0 */
-
-	movel	#0x80000001,%a1
-	movec	%a1,#3086			/* map MBAR2 region */
-	subql	#1,%a1				/* get MBAR2 address in a1 */
-
-	/*
-	 *      Move secondary interrupts to their base (128).
-	 */
-	moveb	#MCFINTC2_VECBASE,%d0
-	moveb	%d0,0x16b(%a1)			/* interrupt base register */
-
-	/*
-	 *      Work around broken CSMR0/DRAM vector problem.
-	 */
-	movel	#0x001F0021,%d0			/* disable C/I bit */
-	movel	%d0,0x84(%a0)			/* set CSMR0 */
-
-	/*
-	 *	Disable the PLL firstly. (Who knows what state it is
-	 *	in here!).
-	 */
-	movel	0x180(%a1),%d0			/* get current PLL value */
-	andl	#0xfffffffe,%d0			/* PLL bypass first */
-	movel	%d0,0x180(%a1)			/* set PLL register */
-	nop
-
-#if CONFIG_CLOCK_FREQ == 140000000
-	/*
-	 *	Set initial clock frequency. This assumes M5249C3 board
-	 *	is fitted with 11.2896MHz crystal. It will program the
-	 *	PLL for 140MHz. Lets go fast :-)
-	 */
-	movel	#0x125a40f0,%d0			/* set for 140MHz */
-	movel	%d0,0x180(%a1)			/* set PLL register */
-	orl	#0x1,%d0
-	movel	%d0,0x180(%a1)			/* set PLL register */
-#endif
-
-	/*
-	 *	Setup CS1 for ethernet controller.
-	 *	(Setup as per M5249C3 doco).
-	 */
-	movel  #0xe0000000,%d0			/* CS1 mapped at 0xe0000000 */
-	movel  %d0,0x8c(%a0)
-	movel  #0x001f0021,%d0			/* CS1 size of 1Mb */
-	movel  %d0,0x90(%a0)
-	movew  #0x0080,%d0			/* CS1 = 16bit port, AA */
-	movew  %d0,0x96(%a0)
-
-	/*
-	 *	Setup CS2 for IDE interface.
-	 */
-	movel	#0x50000000,%d0			/* CS2 mapped at 0x50000000 */
-	movel	%d0,0x98(%a0)
-	movel	#0x001f0001,%d0			/* CS2 size of 1MB */
-	movel	%d0,0x9c(%a0)
-	movew	#0x0080,%d0			/* CS2 = 16bit, TA */
-	movew	%d0,0xa2(%a0)
-
-	movel	#0x00107000,%d0			/* IDEconfig1 */
-	movel	%d0,0x18c(%a1)
-	movel	#0x000c0400,%d0			/* IDEconfig2 */
-	movel	%d0,0x190(%a1)
-
-	movel	#0x00080000,%d0			/* GPIO19, IDE reset bit */
-	orl	%d0,0xc(%a1)			/* function GPIO19 */
-	orl	%d0,0x8(%a1)			/* enable GPIO19 as output */
-        orl	%d0,0x4(%a1)			/* de-assert IDE reset */
-.endm
-
-#define	PLATFORM_SETUP	m5249c3_setup
-
-#endif /* __ASSEMBLER__ */
-
-/****************************************************************************/
-#endif	/* m5249sim_h */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/m5272sim.h b/ANDROID_3.4.5/arch/m68k/include/asm/m5272sim.h
deleted file mode 100644
index a58f1760..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/m5272sim.h
+++ /dev/null
@@ -1,139 +0,0 @@
-/****************************************************************************/
-
-/*
- *	m5272sim.h -- ColdFire 5272 System Integration Module support.
- *
- *	(C) Copyright 1999, Greg Ungerer (gerg@snapgear.com)
- * 	(C) Copyright 2000, Lineo Inc. (www.lineo.com) 
- */
-
-/****************************************************************************/
-#ifndef	m5272sim_h
-#define	m5272sim_h
-/****************************************************************************/
-
-#define	CPU_NAME		"COLDFIRE(m5272)"
-#define	CPU_INSTR_PER_JIFFY	3
-#define	MCF_BUSCLK		MCF_CLK
-
-#include <asm/m52xxacr.h>
-
-/*
- *	Define the 5272 SIM register set addresses.
- */
-#define	MCFSIM_SCR		0x04		/* SIM Config reg (r/w) */
-#define	MCFSIM_SPR		0x06		/* System Protection reg (r/w)*/
-#define	MCFSIM_PMR		0x08		/* Power Management reg (r/w) */
-#define	MCFSIM_APMR		0x0e		/* Active Low Power reg (r/w) */
-#define	MCFSIM_DIR		0x10		/* Device Identity reg (r/w) */
-
-#define	MCFSIM_ICR1		0x20		/* Intr Ctrl reg 1 (r/w) */
-#define	MCFSIM_ICR2		0x24		/* Intr Ctrl reg 2 (r/w) */
-#define	MCFSIM_ICR3		0x28		/* Intr Ctrl reg 3 (r/w) */
-#define	MCFSIM_ICR4		0x2c		/* Intr Ctrl reg 4 (r/w) */
-
-#define MCFSIM_ISR		0x30		/* Interrupt Source reg (r/w) */
-#define MCFSIM_PITR		0x34		/* Interrupt Transition (r/w) */
-#define	MCFSIM_PIWR		0x38		/* Interrupt Wakeup reg (r/w) */
-#define	MCFSIM_PIVR		0x3f		/* Interrupt Vector reg (r/w( */
-
-#define	MCFSIM_WRRR		0x280		/* Watchdog reference (r/w) */
-#define	MCFSIM_WIRR		0x284		/* Watchdog interrupt (r/w) */
-#define	MCFSIM_WCR		0x288		/* Watchdog counter (r/w) */
-#define	MCFSIM_WER		0x28c		/* Watchdog event (r/w) */
-
-#define	MCFSIM_CSBR0		0x40		/* CS0 Base Address (r/w) */
-#define	MCFSIM_CSOR0		0x44		/* CS0 Option (r/w) */
-#define	MCFSIM_CSBR1		0x48		/* CS1 Base Address (r/w) */
-#define	MCFSIM_CSOR1		0x4c		/* CS1 Option (r/w) */
-#define	MCFSIM_CSBR2		0x50		/* CS2 Base Address (r/w) */
-#define	MCFSIM_CSOR2		0x54		/* CS2 Option (r/w) */
-#define	MCFSIM_CSBR3		0x58		/* CS3 Base Address (r/w) */
-#define	MCFSIM_CSOR3		0x5c		/* CS3 Option (r/w) */
-#define	MCFSIM_CSBR4		0x60		/* CS4 Base Address (r/w) */
-#define	MCFSIM_CSOR4		0x64		/* CS4 Option (r/w) */
-#define	MCFSIM_CSBR5		0x68		/* CS5 Base Address (r/w) */
-#define	MCFSIM_CSOR5		0x6c		/* CS5 Option (r/w) */
-#define	MCFSIM_CSBR6		0x70		/* CS6 Base Address (r/w) */
-#define	MCFSIM_CSOR6		0x74		/* CS6 Option (r/w) */
-#define	MCFSIM_CSBR7		0x78		/* CS7 Base Address (r/w) */
-#define	MCFSIM_CSOR7		0x7c		/* CS7 Option (r/w) */
-
-#define	MCFSIM_SDCR		0x180		/* SDRAM Configuration (r/w) */
-#define	MCFSIM_SDTR		0x184		/* SDRAM Timing (r/w) */
-#define	MCFSIM_DCAR0		0x4c		/* DRAM 0 Address reg(r/w) */
-#define	MCFSIM_DCMR0		0x50		/* DRAM 0 Mask reg (r/w) */
-#define	MCFSIM_DCCR0		0x57		/* DRAM 0 Control reg (r/w) */
-#define	MCFSIM_DCAR1		0x58		/* DRAM 1 Address reg (r/w) */
-#define	MCFSIM_DCMR1		0x5c		/* DRAM 1 Mask reg (r/w) */
-#define	MCFSIM_DCCR1		0x63		/* DRAM 1 Control reg (r/w) */
-
-#define	MCFUART_BASE0		(MCF_MBAR + 0x100) /* Base address UART0 */
-#define	MCFUART_BASE1		(MCF_MBAR + 0x140) /* Base address UART1 */
-
-#define	MCFSIM_PACNT		(MCF_MBAR + 0x80) /* Port A Control (r/w) */
-#define	MCFSIM_PADDR		(MCF_MBAR + 0x84) /* Port A Direction (r/w) */
-#define	MCFSIM_PADAT		(MCF_MBAR + 0x86) /* Port A Data (r/w) */
-#define	MCFSIM_PBCNT		(MCF_MBAR + 0x88) /* Port B Control (r/w) */
-#define	MCFSIM_PBDDR		(MCF_MBAR + 0x8c) /* Port B Direction (r/w) */
-#define	MCFSIM_PBDAT		(MCF_MBAR + 0x8e) /* Port B Data (r/w) */
-#define	MCFSIM_PCDDR		(MCF_MBAR + 0x94) /* Port C Direction (r/w) */
-#define	MCFSIM_PCDAT		(MCF_MBAR + 0x96) /* Port C Data (r/w) */
-#define	MCFSIM_PDCNT		(MCF_MBAR + 0x98) /* Port D Control (r/w) */
-
-#define	MCFDMA_BASE0		(MCF_MBAR + 0xe0) /* Base address DMA 0 */
-
-#define	MCFTIMER_BASE1		(MCF_MBAR + 0x200) /* Base address TIMER1 */
-#define	MCFTIMER_BASE2		(MCF_MBAR + 0x220) /* Base address TIMER2 */
-#define	MCFTIMER_BASE3		(MCF_MBAR + 0x240) /* Base address TIMER4 */
-#define	MCFTIMER_BASE4		(MCF_MBAR + 0x260) /* Base address TIMER3 */
-
-#define	MCFFEC_BASE0		(MCF_MBAR + 0x840) /* Base FEC ethernet */
-#define	MCFFEC_SIZE0		0x1d0
-
-/*
- *	Define system peripheral IRQ usage.
- */
-#define	MCFINT_VECBASE		64		/* Base of interrupts */
-#define	MCF_IRQ_SPURIOUS	64		/* User Spurious */
-#define	MCF_IRQ_EINT1		65		/* External Interrupt 1 */
-#define	MCF_IRQ_EINT2		66		/* External Interrupt 2 */
-#define	MCF_IRQ_EINT3		67		/* External Interrupt 3 */
-#define	MCF_IRQ_EINT4		68		/* External Interrupt 4 */
-#define	MCF_IRQ_TIMER1		69		/* Timer 1 */
-#define	MCF_IRQ_TIMER2		70		/* Timer 2 */
-#define	MCF_IRQ_TIMER3		71		/* Timer 3 */
-#define	MCF_IRQ_TIMER4		72		/* Timer 4 */
-#define	MCF_IRQ_UART0		73		/* UART 0 */
-#define	MCF_IRQ_UART1		74		/* UART 1 */
-#define	MCF_IRQ_PLIP		75		/* PLIC 2Khz Periodic */
-#define	MCF_IRQ_PLIA		76		/* PLIC Asynchronous */
-#define	MCF_IRQ_USB0		77		/* USB Endpoint 0 */
-#define	MCF_IRQ_USB1		78		/* USB Endpoint 1 */
-#define	MCF_IRQ_USB2		79		/* USB Endpoint 2 */
-#define	MCF_IRQ_USB3		80		/* USB Endpoint 3 */
-#define	MCF_IRQ_USB4		81		/* USB Endpoint 4 */
-#define	MCF_IRQ_USB5		82		/* USB Endpoint 5 */
-#define	MCF_IRQ_USB6		83		/* USB Endpoint 6 */
-#define	MCF_IRQ_USB7		84		/* USB Endpoint 7 */
-#define	MCF_IRQ_DMA		85		/* DMA Controller */
-#define	MCF_IRQ_FECRX0		86		/* Ethernet Receiver */
-#define	MCF_IRQ_FECTX0		87		/* Ethernet Transmitter */
-#define	MCF_IRQ_FECENTC0	88		/* Ethernet Non-Time Critical */
-#define	MCF_IRQ_QSPI		89		/* Queued Serial Interface */
-#define	MCF_IRQ_EINT5		90		/* External Interrupt 5 */
-#define	MCF_IRQ_EINT6		91		/* External Interrupt 6 */
-#define	MCF_IRQ_SWTO		92		/* Software Watchdog */
-#define	MCFINT_VECMAX		95		/* Maxmum interrupt */
-
-#define	MCF_IRQ_TIMER		MCF_IRQ_TIMER1
-#define	MCF_IRQ_PROFILER	MCF_IRQ_TIMER2
-
-/*
- * Generic GPIO support
- */
-#define MCFGPIO_PIN_MAX			48
-#define MCFGPIO_IRQ_MAX			-1
-#define MCFGPIO_IRQ_VECBASE		-1
-/****************************************************************************/
-#endif	/* m5272sim_h */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/m527xsim.h b/ANDROID_3.4.5/arch/m68k/include/asm/m527xsim.h
deleted file mode 100644
index 83db8106..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/m527xsim.h
+++ /dev/null
@@ -1,338 +0,0 @@
-/****************************************************************************/
-
-/*
- *	m527xsim.h -- ColdFire 5270/5271 System Integration Module support.
- *
- *	(C) Copyright 2004, Greg Ungerer (gerg@snapgear.com)
- */
-
-/****************************************************************************/
-#ifndef	m527xsim_h
-#define	m527xsim_h
-/****************************************************************************/
-
-#define	CPU_NAME		"COLDFIRE(m527x)"
-#define	CPU_INSTR_PER_JIFFY	3
-#define	MCF_BUSCLK		(MCF_CLK / 2)
-
-#include <asm/m52xxacr.h>
-
-/*
- *	Define the 5270/5271 SIM register set addresses.
- */
-#define	MCFICM_INTC0		(MCF_IPSBAR + 0x0c00)	/* Base for Interrupt Ctrl 0 */
-#define	MCFICM_INTC1		(MCF_IPSBAR + 0x0d00)	/* Base for Interrupt Ctrl 1 */
-
-#define	MCFINTC_IPRH		0x00		/* Interrupt pending 32-63 */
-#define	MCFINTC_IPRL		0x04		/* Interrupt pending 1-31 */
-#define	MCFINTC_IMRH		0x08		/* Interrupt mask 32-63 */
-#define	MCFINTC_IMRL		0x0c		/* Interrupt mask 1-31 */
-#define	MCFINTC_INTFRCH		0x10		/* Interrupt force 32-63 */
-#define	MCFINTC_INTFRCL		0x14		/* Interrupt force 1-31 */
-#define	MCFINTC_IRLR		0x18		/* */
-#define	MCFINTC_IACKL		0x19		/* */
-#define	MCFINTC_ICR0		0x40		/* Base ICR register */
-
-#define	MCFINT_VECBASE		64		/* Vector base number */
-#define	MCFINT_UART0		13		/* Interrupt number for UART0 */
-#define	MCFINT_UART1		14		/* Interrupt number for UART1 */
-#define	MCFINT_UART2		15		/* Interrupt number for UART2 */
-#define	MCFINT_QSPI		18		/* Interrupt number for QSPI */
-#define	MCFINT_FECRX0		23		/* Interrupt number for FEC0 */
-#define	MCFINT_FECTX0		27		/* Interrupt number for FEC0 */
-#define	MCFINT_FECENTC0		29		/* Interrupt number for FEC0 */
-#define	MCFINT_PIT1		36		/* Interrupt number for PIT1 */
-
-#define	MCFINT2_VECBASE		128		/* Vector base number 2 */
-#define	MCFINT2_FECRX1		23		/* Interrupt number for FEC1 */
-#define	MCFINT2_FECTX1		27		/* Interrupt number for FEC1 */
-#define	MCFINT2_FECENTC1	29		/* Interrupt number for FEC1 */
-
-#define	MCF_IRQ_UART0	        (MCFINT_VECBASE + MCFINT_UART0)
-#define	MCF_IRQ_UART1	        (MCFINT_VECBASE + MCFINT_UART1)
-#define	MCF_IRQ_UART2	        (MCFINT_VECBASE + MCFINT_UART2)
-
-#define	MCF_IRQ_FECRX0		(MCFINT_VECBASE + MCFINT_FECRX0)
-#define	MCF_IRQ_FECTX0		(MCFINT_VECBASE + MCFINT_FECTX0)
-#define	MCF_IRQ_FECENTC0	(MCFINT_VECBASE + MCFINT_FECENTC0)
-#define	MCF_IRQ_FECRX1		(MCFINT2_VECBASE + MCFINT2_FECRX1)
-#define	MCF_IRQ_FECTX1		(MCFINT2_VECBASE + MCFINT2_FECTX1)
-#define	MCF_IRQ_FECENTC1	(MCFINT2_VECBASE + MCFINT2_FECENTC1)
-
-#define	MCF_IRQ_QSPI		(MCFINT_VECBASE + MCFINT_QSPI)
-
-/*
- *	SDRAM configuration registers.
- */
-#ifdef CONFIG_M5271
-#define	MCFSIM_DCR		(MCF_IPSBAR + 0x40)	/* Control */
-#define	MCFSIM_DACR0		(MCF_IPSBAR + 0x48)	/* Base address 0 */
-#define	MCFSIM_DMR0		(MCF_IPSBAR + 0x4c)	/* Address mask 0 */
-#define	MCFSIM_DACR1		(MCF_IPSBAR + 0x50)	/* Base address 1 */
-#define	MCFSIM_DMR1		(MCF_IPSBAR + 0x54)	/* Address mask 1 */
-#endif
-#ifdef CONFIG_M5275
-#define	MCFSIM_DMR		(MCF_IPSBAR + 0x40)	/* Mode */
-#define	MCFSIM_DCR		(MCF_IPSBAR + 0x44)	/* Control */
-#define	MCFSIM_DCFG1		(MCF_IPSBAR + 0x48)	/* Configuration 1 */
-#define	MCFSIM_DCFG2		(MCF_IPSBAR + 0x4c)	/* Configuration 2 */
-#define	MCFSIM_DBAR0		(MCF_IPSBAR + 0x50)	/* Base address 0 */
-#define	MCFSIM_DMR0		(MCF_IPSBAR + 0x54)	/* Address mask 0 */
-#define	MCFSIM_DBAR1		(MCF_IPSBAR + 0x58)	/* Base address 1 */
-#define	MCFSIM_DMR1		(MCF_IPSBAR + 0x5c)	/* Address mask 1 */
-#endif
-
-/*
- *	DMA unit base addresses.
- */
-#define	MCFDMA_BASE0		(MCF_IPSBAR + 0x100)
-#define	MCFDMA_BASE1		(MCF_IPSBAR + 0x140)
-#define	MCFDMA_BASE2		(MCF_IPSBAR + 0x180)
-#define	MCFDMA_BASE3		(MCF_IPSBAR + 0x1C0)
-
-/*
- *	UART module.
- */
-#define MCFUART_BASE0		(MCF_IPSBAR + 0x200)
-#define MCFUART_BASE1		(MCF_IPSBAR + 0x240)
-#define MCFUART_BASE2		(MCF_IPSBAR + 0x280)
-
-/*
- *	FEC ethernet module.
- */
-#define	MCFFEC_BASE0		(MCF_IPSBAR + 0x1000)
-#define	MCFFEC_SIZE0		0x800
-#define	MCFFEC_BASE1		(MCF_IPSBAR + 0x1800)
-#define	MCFFEC_SIZE1		0x800
-
-/*
- *	QSPI module.
- */
-#define	MCFQSPI_BASE		(MCF_IPSBAR + 0x340)
-#define	MCFQSPI_SIZE		0x40
-
-#ifdef CONFIG_M5271
-#define	MCFQSPI_CS0		91
-#define	MCFQSPI_CS1		92
-#define	MCFQSPI_CS2		99
-#define	MCFQSPI_CS3		103
-#endif
-#ifdef CONFIG_M5275
-#define	MCFQSPI_CS0		59
-#define	MCFQSPI_CS1		60
-#define	MCFQSPI_CS2		61
-#define	MCFQSPI_CS3		62
-#endif
-
-/*
- *	GPIO module.
- */
-#ifdef CONFIG_M5271
-#define MCFGPIO_PODR_ADDR	(MCF_IPSBAR + 0x100000)
-#define MCFGPIO_PODR_DATAH	(MCF_IPSBAR + 0x100001)
-#define MCFGPIO_PODR_DATAL	(MCF_IPSBAR + 0x100002)
-#define MCFGPIO_PODR_BUSCTL	(MCF_IPSBAR + 0x100003)
-#define MCFGPIO_PODR_BS		(MCF_IPSBAR + 0x100004)
-#define MCFGPIO_PODR_CS		(MCF_IPSBAR + 0x100005)
-#define MCFGPIO_PODR_SDRAM	(MCF_IPSBAR + 0x100006)
-#define MCFGPIO_PODR_FECI2C	(MCF_IPSBAR + 0x100007)
-#define MCFGPIO_PODR_UARTH	(MCF_IPSBAR + 0x100008)
-#define MCFGPIO_PODR_UARTL	(MCF_IPSBAR + 0x100009)
-#define MCFGPIO_PODR_QSPI	(MCF_IPSBAR + 0x10000A)
-#define MCFGPIO_PODR_TIMER	(MCF_IPSBAR + 0x10000B)
-
-#define MCFGPIO_PDDR_ADDR	(MCF_IPSBAR + 0x100010)
-#define MCFGPIO_PDDR_DATAH	(MCF_IPSBAR + 0x100011)
-#define MCFGPIO_PDDR_DATAL	(MCF_IPSBAR + 0x100012)
-#define MCFGPIO_PDDR_BUSCTL	(MCF_IPSBAR + 0x100013)
-#define MCFGPIO_PDDR_BS		(MCF_IPSBAR + 0x100014)
-#define MCFGPIO_PDDR_CS		(MCF_IPSBAR + 0x100015)
-#define MCFGPIO_PDDR_SDRAM	(MCF_IPSBAR + 0x100016)
-#define MCFGPIO_PDDR_FECI2C	(MCF_IPSBAR + 0x100017)
-#define MCFGPIO_PDDR_UARTH	(MCF_IPSBAR + 0x100018)
-#define MCFGPIO_PDDR_UARTL	(MCF_IPSBAR + 0x100019)
-#define MCFGPIO_PDDR_QSPI	(MCF_IPSBAR + 0x10001A)
-#define MCFGPIO_PDDR_TIMER	(MCF_IPSBAR + 0x10001B)
-
-#define MCFGPIO_PPDSDR_ADDR	(MCF_IPSBAR + 0x100020)
-#define MCFGPIO_PPDSDR_DATAH	(MCF_IPSBAR + 0x100021)
-#define MCFGPIO_PPDSDR_DATAL	(MCF_IPSBAR + 0x100022)
-#define MCFGPIO_PPDSDR_BUSCTL	(MCF_IPSBAR + 0x100023)
-#define MCFGPIO_PPDSDR_BS	(MCF_IPSBAR + 0x100024)
-#define MCFGPIO_PPDSDR_CS	(MCF_IPSBAR + 0x100025)
-#define MCFGPIO_PPDSDR_SDRAM	(MCF_IPSBAR + 0x100026)
-#define MCFGPIO_PPDSDR_FECI2C	(MCF_IPSBAR + 0x100027)
-#define MCFGPIO_PPDSDR_UARTH	(MCF_IPSBAR + 0x100028)
-#define MCFGPIO_PPDSDR_UARTL	(MCF_IPSBAR + 0x100029)
-#define MCFGPIO_PPDSDR_QSPI	(MCF_IPSBAR + 0x10002A)
-#define MCFGPIO_PPDSDR_TIMER	(MCF_IPSBAR + 0x10002B)
-
-#define MCFGPIO_PCLRR_ADDR	(MCF_IPSBAR + 0x100030)
-#define MCFGPIO_PCLRR_DATAH	(MCF_IPSBAR + 0x100031)
-#define MCFGPIO_PCLRR_DATAL	(MCF_IPSBAR + 0x100032)
-#define MCFGPIO_PCLRR_BUSCTL	(MCF_IPSBAR + 0x100033)
-#define MCFGPIO_PCLRR_BS	(MCF_IPSBAR + 0x100034)
-#define MCFGPIO_PCLRR_CS	(MCF_IPSBAR + 0x100035)
-#define MCFGPIO_PCLRR_SDRAM	(MCF_IPSBAR + 0x100036)
-#define MCFGPIO_PCLRR_FECI2C	(MCF_IPSBAR + 0x100037)
-#define MCFGPIO_PCLRR_UARTH	(MCF_IPSBAR + 0x100038)
-#define MCFGPIO_PCLRR_UARTL	(MCF_IPSBAR + 0x100039)
-#define MCFGPIO_PCLRR_QSPI	(MCF_IPSBAR + 0x10003A)
-#define MCFGPIO_PCLRR_TIMER	(MCF_IPSBAR + 0x10003B)
-
-/*
- * Generic GPIO support
- */
-#define MCFGPIO_PODR			MCFGPIO_PODR_ADDR
-#define MCFGPIO_PDDR			MCFGPIO_PDDR_ADDR
-#define MCFGPIO_PPDR			MCFGPIO_PPDSDR_ADDR
-#define MCFGPIO_SETR			MCFGPIO_PPDSDR_ADDR
-#define MCFGPIO_CLRR			MCFGPIO_PCLRR_ADDR
-
-#define MCFGPIO_PIN_MAX			100
-#define MCFGPIO_IRQ_MAX			8
-#define MCFGPIO_IRQ_VECBASE		MCFINT_VECBASE
-
-#define MCFGPIO_PAR_QSPI	(MCF_IPSBAR + 0x10004A)
-#define MCFGPIO_PAR_TIMER	(MCF_IPSBAR + 0x10004C)
-#endif
-
-#ifdef CONFIG_M5275
-#define MCFGPIO_PODR_BUSCTL	(MCF_IPSBAR + 0x100004)
-#define MCFGPIO_PODR_ADDR	(MCF_IPSBAR + 0x100005)
-#define MCFGPIO_PODR_CS		(MCF_IPSBAR + 0x100008)
-#define MCFGPIO_PODR_FEC0H	(MCF_IPSBAR + 0x10000A)
-#define MCFGPIO_PODR_FEC0L	(MCF_IPSBAR + 0x10000B)
-#define MCFGPIO_PODR_FECI2C	(MCF_IPSBAR + 0x10000C)
-#define MCFGPIO_PODR_QSPI	(MCF_IPSBAR + 0x10000D)
-#define MCFGPIO_PODR_SDRAM	(MCF_IPSBAR + 0x10000E)
-#define MCFGPIO_PODR_TIMERH	(MCF_IPSBAR + 0x10000F)
-#define MCFGPIO_PODR_TIMERL	(MCF_IPSBAR + 0x100010)
-#define MCFGPIO_PODR_UARTL	(MCF_IPSBAR + 0x100011)
-#define MCFGPIO_PODR_FEC1H	(MCF_IPSBAR + 0x100012)
-#define MCFGPIO_PODR_FEC1L	(MCF_IPSBAR + 0x100013)
-#define MCFGPIO_PODR_BS		(MCF_IPSBAR + 0x100014)
-#define MCFGPIO_PODR_IRQ	(MCF_IPSBAR + 0x100015)
-#define MCFGPIO_PODR_USBH	(MCF_IPSBAR + 0x100016)
-#define MCFGPIO_PODR_USBL	(MCF_IPSBAR + 0x100017)
-#define MCFGPIO_PODR_UARTH	(MCF_IPSBAR + 0x100018)
-
-#define MCFGPIO_PDDR_BUSCTL	(MCF_IPSBAR + 0x100020)
-#define MCFGPIO_PDDR_ADDR	(MCF_IPSBAR + 0x100021)
-#define MCFGPIO_PDDR_CS		(MCF_IPSBAR + 0x100024)
-#define MCFGPIO_PDDR_FEC0H	(MCF_IPSBAR + 0x100026)
-#define MCFGPIO_PDDR_FEC0L	(MCF_IPSBAR + 0x100027)
-#define MCFGPIO_PDDR_FECI2C	(MCF_IPSBAR + 0x100028)
-#define MCFGPIO_PDDR_QSPI	(MCF_IPSBAR + 0x100029)
-#define MCFGPIO_PDDR_SDRAM	(MCF_IPSBAR + 0x10002A)
-#define MCFGPIO_PDDR_TIMERH	(MCF_IPSBAR + 0x10002B)
-#define MCFGPIO_PDDR_TIMERL	(MCF_IPSBAR + 0x10002C)
-#define MCFGPIO_PDDR_UARTL	(MCF_IPSBAR + 0x10002D)
-#define MCFGPIO_PDDR_FEC1H	(MCF_IPSBAR + 0x10002E)
-#define MCFGPIO_PDDR_FEC1L	(MCF_IPSBAR + 0x10002F)
-#define MCFGPIO_PDDR_BS		(MCF_IPSBAR + 0x100030)
-#define MCFGPIO_PDDR_IRQ	(MCF_IPSBAR + 0x100031)
-#define MCFGPIO_PDDR_USBH	(MCF_IPSBAR + 0x100032)
-#define MCFGPIO_PDDR_USBL	(MCF_IPSBAR + 0x100033)
-#define MCFGPIO_PDDR_UARTH	(MCF_IPSBAR + 0x100034)
-
-#define MCFGPIO_PPDSDR_BUSCTL	(MCF_IPSBAR + 0x10003C)
-#define MCFGPIO_PPDSDR_ADDR	(MCF_IPSBAR + 0x10003D)
-#define MCFGPIO_PPDSDR_CS	(MCF_IPSBAR + 0x100040)
-#define MCFGPIO_PPDSDR_FEC0H	(MCF_IPSBAR + 0x100042)
-#define MCFGPIO_PPDSDR_FEC0L	(MCF_IPSBAR + 0x100043)
-#define MCFGPIO_PPDSDR_FECI2C	(MCF_IPSBAR + 0x100044)
-#define MCFGPIO_PPDSDR_QSPI	(MCF_IPSBAR + 0x100045)
-#define MCFGPIO_PPDSDR_SDRAM	(MCF_IPSBAR + 0x100046)
-#define MCFGPIO_PPDSDR_TIMERH	(MCF_IPSBAR + 0x100047)
-#define MCFGPIO_PPDSDR_TIMERL	(MCF_IPSBAR + 0x100048)
-#define MCFGPIO_PPDSDR_UARTL	(MCF_IPSBAR + 0x100049)
-#define MCFGPIO_PPDSDR_FEC1H	(MCF_IPSBAR + 0x10004A)
-#define MCFGPIO_PPDSDR_FEC1L	(MCF_IPSBAR + 0x10004B)
-#define MCFGPIO_PPDSDR_BS	(MCF_IPSBAR + 0x10004C)
-#define MCFGPIO_PPDSDR_IRQ	(MCF_IPSBAR + 0x10004D)
-#define MCFGPIO_PPDSDR_USBH	(MCF_IPSBAR + 0x10004E)
-#define MCFGPIO_PPDSDR_USBL	(MCF_IPSBAR + 0x10004F)
-#define MCFGPIO_PPDSDR_UARTH	(MCF_IPSBAR + 0x100050)
-
-#define MCFGPIO_PCLRR_BUSCTL	(MCF_IPSBAR + 0x100058)
-#define MCFGPIO_PCLRR_ADDR	(MCF_IPSBAR + 0x100059)
-#define MCFGPIO_PCLRR_CS	(MCF_IPSBAR + 0x10005C)
-#define MCFGPIO_PCLRR_FEC0H	(MCF_IPSBAR + 0x10005E)
-#define MCFGPIO_PCLRR_FEC0L	(MCF_IPSBAR + 0x10005F)
-#define MCFGPIO_PCLRR_FECI2C	(MCF_IPSBAR + 0x100060)
-#define MCFGPIO_PCLRR_QSPI	(MCF_IPSBAR + 0x100061)
-#define MCFGPIO_PCLRR_SDRAM	(MCF_IPSBAR + 0x100062)
-#define MCFGPIO_PCLRR_TIMERH	(MCF_IPSBAR + 0x100063)
-#define MCFGPIO_PCLRR_TIMERL	(MCF_IPSBAR + 0x100064)
-#define MCFGPIO_PCLRR_UARTL	(MCF_IPSBAR + 0x100065)
-#define MCFGPIO_PCLRR_FEC1H	(MCF_IPSBAR + 0x100066)
-#define MCFGPIO_PCLRR_FEC1L	(MCF_IPSBAR + 0x100067)
-#define MCFGPIO_PCLRR_BS	(MCF_IPSBAR + 0x100068)
-#define MCFGPIO_PCLRR_IRQ	(MCF_IPSBAR + 0x100069)
-#define MCFGPIO_PCLRR_USBH	(MCF_IPSBAR + 0x10006A)
-#define MCFGPIO_PCLRR_USBL	(MCF_IPSBAR + 0x10006B)
-#define MCFGPIO_PCLRR_UARTH	(MCF_IPSBAR + 0x10006C)
-
-
-/*
- * Generic GPIO support
- */
-#define MCFGPIO_PODR			MCFGPIO_PODR_BUSCTL
-#define MCFGPIO_PDDR			MCFGPIO_PDDR_BUSCTL
-#define MCFGPIO_PPDR			MCFGPIO_PPDSDR_BUSCTL
-#define MCFGPIO_SETR			MCFGPIO_PPDSDR_BUSCTL
-#define MCFGPIO_CLRR			MCFGPIO_PCLRR_BUSCTL
-
-#define MCFGPIO_PIN_MAX			148
-#define MCFGPIO_IRQ_MAX			8
-#define MCFGPIO_IRQ_VECBASE		MCFINT_VECBASE
-
-#define MCFGPIO_PAR_QSPI	(MCF_IPSBAR + 0x10007E)
-#endif
-
-/*
- * PIT timer base addresses.
- */
-#define	MCFPIT_BASE1		(MCF_IPSBAR + 0x150000)
-#define	MCFPIT_BASE2		(MCF_IPSBAR + 0x160000)
-#define	MCFPIT_BASE3		(MCF_IPSBAR + 0x170000)
-#define	MCFPIT_BASE4		(MCF_IPSBAR + 0x180000)
-
-/*
- * EPort
- */
-#define MCFEPORT_EPPAR		(MCF_IPSBAR + 0x130000)
-#define MCFEPORT_EPDDR		(MCF_IPSBAR + 0x130002)
-#define MCFEPORT_EPIER		(MCF_IPSBAR + 0x130003)
-#define MCFEPORT_EPDR		(MCF_IPSBAR + 0x130004)
-#define MCFEPORT_EPPDR		(MCF_IPSBAR + 0x130005)
-#define MCFEPORT_EPFR		(MCF_IPSBAR + 0x130006)
-
-/*
- *	GPIO pins setups to enable the UARTs.
- */
-#ifdef CONFIG_M5271
-#define MCF_GPIO_PAR_UART	0x100048	/* PAR UART address */
-#define UART0_ENABLE_MASK	0x000f
-#define UART1_ENABLE_MASK	0x0ff0
-#define UART2_ENABLE_MASK	0x3000
-#endif
-#ifdef CONFIG_M5275
-#define MCF_GPIO_PAR_UART	0x10007c	/* PAR UART address */
-#define UART0_ENABLE_MASK	0x000f
-#define UART1_ENABLE_MASK	0x00f0
-#define UART2_ENABLE_MASK	0x3f00 
-#endif
-
-/*
- *  Reset Control Unit (relative to IPSBAR).
- */
-#define	MCF_RCR			(MCF_IPSBAR + 0x110000)
-#define	MCF_RSR			(MCF_IPSBAR + 0x110001)
-
-#define	MCF_RCR_SWRESET		0x80		/* Software reset bit */
-#define	MCF_RCR_FRCSTOUT	0x40		/* Force external reset */
-
-/****************************************************************************/
-#endif	/* m527xsim_h */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/m528xsim.h b/ANDROID_3.4.5/arch/m68k/include/asm/m528xsim.h
deleted file mode 100644
index 569476fb..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/m528xsim.h
+++ /dev/null
@@ -1,314 +0,0 @@
-/****************************************************************************/
-
-/*
- *	m528xsim.h -- ColdFire 5280/5282 System Integration Module support.
- *
- *	(C) Copyright 2003, Greg Ungerer (gerg@snapgear.com)
- */
-
-/****************************************************************************/
-#ifndef	m528xsim_h
-#define	m528xsim_h
-/****************************************************************************/
-
-#define	CPU_NAME		"COLDFIRE(m528x)"
-#define	CPU_INSTR_PER_JIFFY	3
-#define	MCF_BUSCLK		MCF_CLK
-
-#include <asm/m52xxacr.h>
-
-/*
- *	Define the 5280/5282 SIM register set addresses.
- */
-#define	MCFICM_INTC0		(MCF_IPSBAR + 0x0c00)	/* Base for Interrupt Ctrl 0 */
-#define	MCFICM_INTC1		(MCF_IPSBAR + 0x0d00)	/* Base for Interrupt Ctrl 0 */
-
-#define	MCFINTC_IPRH		0x00		/* Interrupt pending 32-63 */
-#define	MCFINTC_IPRL		0x04		/* Interrupt pending 1-31 */
-#define	MCFINTC_IMRH		0x08		/* Interrupt mask 32-63 */
-#define	MCFINTC_IMRL		0x0c		/* Interrupt mask 1-31 */
-#define	MCFINTC_INTFRCH		0x10		/* Interrupt force 32-63 */
-#define	MCFINTC_INTFRCL		0x14		/* Interrupt force 1-31 */
-#define	MCFINTC_IRLR		0x18		/* */
-#define	MCFINTC_IACKL		0x19		/* */
-#define	MCFINTC_ICR0		0x40		/* Base ICR register */
-
-#define	MCFINT_VECBASE		64		/* Vector base number */
-#define	MCFINT_UART0		13		/* Interrupt number for UART0 */
-#define	MCFINT_UART1		14		/* Interrupt number for UART1 */
-#define	MCFINT_UART2		15		/* Interrupt number for UART2 */
-#define	MCFINT_QSPI		18		/* Interrupt number for QSPI */
-#define	MCFINT_FECRX0		23		/* Interrupt number for FEC */
-#define	MCFINT_FECTX0		27		/* Interrupt number for FEC */
-#define	MCFINT_FECENTC0		29		/* Interrupt number for FEC */
-#define	MCFINT_PIT1		55		/* Interrupt number for PIT1 */
-
-#define	MCF_IRQ_UART0	        (MCFINT_VECBASE + MCFINT_UART0)
-#define	MCF_IRQ_UART1	        (MCFINT_VECBASE + MCFINT_UART1)
-#define	MCF_IRQ_UART2	        (MCFINT_VECBASE + MCFINT_UART2)
-
-#define	MCF_IRQ_FECRX0		(MCFINT_VECBASE + MCFINT_FECRX0)
-#define	MCF_IRQ_FECTX0		(MCFINT_VECBASE + MCFINT_FECTX0)
-#define	MCF_IRQ_FECENTC0	(MCFINT_VECBASE + MCFINT_FECENTC0)
-
-#define	MCF_IRQ_QSPI		(MCFINT_VECBASE + MCFINT_QSPI)
-
-/*
- *	SDRAM configuration registers.
- */
-#define	MCFSIM_DCR		(MCF_IPSBAR + 0x00000044) /* Control */
-#define	MCFSIM_DACR0		(MCF_IPSBAR + 0x00000048) /* Base address 0 */
-#define	MCFSIM_DMR0		(MCF_IPSBAR + 0x0000004c) /* Address mask 0 */
-#define	MCFSIM_DACR1		(MCF_IPSBAR + 0x00000050) /* Base address 1 */
-#define	MCFSIM_DMR1		(MCF_IPSBAR + 0x00000054) /* Address mask 1 */
-
-/*
- *	DMA unit base addresses.
- */
-#define	MCFDMA_BASE0		(MCF_IPSBAR + 0x00000100)
-#define	MCFDMA_BASE1		(MCF_IPSBAR + 0x00000140)
-#define	MCFDMA_BASE2		(MCF_IPSBAR + 0x00000180)
-#define	MCFDMA_BASE3		(MCF_IPSBAR + 0x000001C0)
-
-/*
- *	UART module.
- */
-#define	MCFUART_BASE0		(MCF_IPSBAR + 0x00000200)
-#define	MCFUART_BASE1		(MCF_IPSBAR + 0x00000240)
-#define	MCFUART_BASE2		(MCF_IPSBAR + 0x00000280)
-
-/*
- *	FEC ethernet module.
- */
-#define	MCFFEC_BASE0		(MCF_IPSBAR + 0x00001000)
-#define	MCFFEC_SIZE0		0x800
-
-/*
- *	QSPI module.
- */
-#define	MCFQSPI_IOBASE		(MCF_IPSBAR + 0x340)
-#define	MCFQSPI_SIZE		0x40
-
-#define	MCFQSPI_CS0		147
-#define	MCFQSPI_CS1		148
-#define	MCFQSPI_CS2		149
-#define	MCFQSPI_CS3		150
-
-/*
- * 	GPIO registers
- */
-#define MCFGPIO_PORTA		(MCF_IPSBAR + 0x00100000)
-#define MCFGPIO_PORTB		(MCF_IPSBAR + 0x00100001)
-#define MCFGPIO_PORTC		(MCF_IPSBAR + 0x00100002)
-#define MCFGPIO_PORTD		(MCF_IPSBAR + 0x00100003)
-#define MCFGPIO_PORTE		(MCF_IPSBAR + 0x00100004)
-#define MCFGPIO_PORTF		(MCF_IPSBAR + 0x00100005)
-#define MCFGPIO_PORTG		(MCF_IPSBAR + 0x00100006)
-#define MCFGPIO_PORTH		(MCF_IPSBAR + 0x00100007)
-#define MCFGPIO_PORTJ		(MCF_IPSBAR + 0x00100008)
-#define MCFGPIO_PORTDD		(MCF_IPSBAR + 0x00100009)
-#define MCFGPIO_PORTEH		(MCF_IPSBAR + 0x0010000A)
-#define MCFGPIO_PORTEL		(MCF_IPSBAR + 0x0010000B)
-#define MCFGPIO_PORTAS		(MCF_IPSBAR + 0x0010000C)
-#define MCFGPIO_PORTQS		(MCF_IPSBAR + 0x0010000D)
-#define MCFGPIO_PORTSD		(MCF_IPSBAR + 0x0010000E)
-#define MCFGPIO_PORTTC		(MCF_IPSBAR + 0x0010000F)
-#define MCFGPIO_PORTTD		(MCF_IPSBAR + 0x00100010)
-#define MCFGPIO_PORTUA		(MCF_IPSBAR + 0x00100011)
-
-#define MCFGPIO_DDRA		(MCF_IPSBAR + 0x00100014)
-#define MCFGPIO_DDRB		(MCF_IPSBAR + 0x00100015)
-#define MCFGPIO_DDRC		(MCF_IPSBAR + 0x00100016)
-#define MCFGPIO_DDRD		(MCF_IPSBAR + 0x00100017)
-#define MCFGPIO_DDRE		(MCF_IPSBAR + 0x00100018)
-#define MCFGPIO_DDRF		(MCF_IPSBAR + 0x00100019)
-#define MCFGPIO_DDRG		(MCF_IPSBAR + 0x0010001A)
-#define MCFGPIO_DDRH		(MCF_IPSBAR + 0x0010001B)
-#define MCFGPIO_DDRJ		(MCF_IPSBAR + 0x0010001C)
-#define MCFGPIO_DDRDD		(MCF_IPSBAR + 0x0010001D)
-#define MCFGPIO_DDREH		(MCF_IPSBAR + 0x0010001E)
-#define MCFGPIO_DDREL		(MCF_IPSBAR + 0x0010001F)
-#define MCFGPIO_DDRAS		(MCF_IPSBAR + 0x00100020)
-#define MCFGPIO_DDRQS		(MCF_IPSBAR + 0x00100021)
-#define MCFGPIO_DDRSD		(MCF_IPSBAR + 0x00100022)
-#define MCFGPIO_DDRTC		(MCF_IPSBAR + 0x00100023)
-#define MCFGPIO_DDRTD		(MCF_IPSBAR + 0x00100024)
-#define MCFGPIO_DDRUA		(MCF_IPSBAR + 0x00100025)
-
-#define MCFGPIO_PORTAP		(MCF_IPSBAR + 0x00100028)
-#define MCFGPIO_PORTBP		(MCF_IPSBAR + 0x00100029)
-#define MCFGPIO_PORTCP		(MCF_IPSBAR + 0x0010002A)
-#define MCFGPIO_PORTDP		(MCF_IPSBAR + 0x0010002B)
-#define MCFGPIO_PORTEP		(MCF_IPSBAR + 0x0010002C)
-#define MCFGPIO_PORTFP		(MCF_IPSBAR + 0x0010002D)
-#define MCFGPIO_PORTGP		(MCF_IPSBAR + 0x0010002E)
-#define MCFGPIO_PORTHP		(MCF_IPSBAR + 0x0010002F)
-#define MCFGPIO_PORTJP		(MCF_IPSBAR + 0x00100030)
-#define MCFGPIO_PORTDDP		(MCF_IPSBAR + 0x00100031)
-#define MCFGPIO_PORTEHP		(MCF_IPSBAR + 0x00100032)
-#define MCFGPIO_PORTELP		(MCF_IPSBAR + 0x00100033)
-#define MCFGPIO_PORTASP		(MCF_IPSBAR + 0x00100034)
-#define MCFGPIO_PORTQSP		(MCF_IPSBAR + 0x00100035)
-#define MCFGPIO_PORTSDP		(MCF_IPSBAR + 0x00100036)
-#define MCFGPIO_PORTTCP		(MCF_IPSBAR + 0x00100037)
-#define MCFGPIO_PORTTDP		(MCF_IPSBAR + 0x00100038)
-#define MCFGPIO_PORTUAP		(MCF_IPSBAR + 0x00100039)
-
-#define MCFGPIO_SETA		(MCF_IPSBAR + 0x00100028)
-#define MCFGPIO_SETB		(MCF_IPSBAR + 0x00100029)
-#define MCFGPIO_SETC		(MCF_IPSBAR + 0x0010002A)
-#define MCFGPIO_SETD		(MCF_IPSBAR + 0x0010002B)
-#define MCFGPIO_SETE		(MCF_IPSBAR + 0x0010002C)
-#define MCFGPIO_SETF		(MCF_IPSBAR + 0x0010002D)
-#define MCFGPIO_SETG		(MCF_IPSBAR + 0x0010002E)
-#define MCFGPIO_SETH		(MCF_IPSBAR + 0x0010002F)
-#define MCFGPIO_SETJ		(MCF_IPSBAR + 0x00100030)
-#define MCFGPIO_SETDD		(MCF_IPSBAR + 0x00100031)
-#define MCFGPIO_SETEH		(MCF_IPSBAR + 0x00100032)
-#define MCFGPIO_SETEL		(MCF_IPSBAR + 0x00100033)
-#define MCFGPIO_SETAS		(MCF_IPSBAR + 0x00100034)
-#define MCFGPIO_SETQS		(MCF_IPSBAR + 0x00100035)
-#define MCFGPIO_SETSD		(MCF_IPSBAR + 0x00100036)
-#define MCFGPIO_SETTC		(MCF_IPSBAR + 0x00100037)
-#define MCFGPIO_SETTD		(MCF_IPSBAR + 0x00100038)
-#define MCFGPIO_SETUA		(MCF_IPSBAR + 0x00100039)
-
-#define MCFGPIO_CLRA		(MCF_IPSBAR + 0x0010003C)
-#define MCFGPIO_CLRB		(MCF_IPSBAR + 0x0010003D)
-#define MCFGPIO_CLRC		(MCF_IPSBAR + 0x0010003E)
-#define MCFGPIO_CLRD		(MCF_IPSBAR + 0x0010003F)
-#define MCFGPIO_CLRE		(MCF_IPSBAR + 0x00100040)
-#define MCFGPIO_CLRF		(MCF_IPSBAR + 0x00100041)
-#define MCFGPIO_CLRG		(MCF_IPSBAR + 0x00100042)
-#define MCFGPIO_CLRH		(MCF_IPSBAR + 0x00100043)
-#define MCFGPIO_CLRJ		(MCF_IPSBAR + 0x00100044)
-#define MCFGPIO_CLRDD		(MCF_IPSBAR + 0x00100045)
-#define MCFGPIO_CLREH		(MCF_IPSBAR + 0x00100046)
-#define MCFGPIO_CLREL		(MCF_IPSBAR + 0x00100047)
-#define MCFGPIO_CLRAS		(MCF_IPSBAR + 0x00100048)
-#define MCFGPIO_CLRQS		(MCF_IPSBAR + 0x00100049)
-#define MCFGPIO_CLRSD		(MCF_IPSBAR + 0x0010004A)
-#define MCFGPIO_CLRTC		(MCF_IPSBAR + 0x0010004B)
-#define MCFGPIO_CLRTD		(MCF_IPSBAR + 0x0010004C)
-#define MCFGPIO_CLRUA		(MCF_IPSBAR + 0x0010004D)
-
-#define MCFGPIO_PBCDPAR		(MCF_IPSBAR + 0x00100050)
-#define MCFGPIO_PFPAR		(MCF_IPSBAR + 0x00100051)
-#define MCFGPIO_PEPAR		(MCF_IPSBAR + 0x00100052)
-#define MCFGPIO_PJPAR		(MCF_IPSBAR + 0x00100054)
-#define MCFGPIO_PSDPAR		(MCF_IPSBAR + 0x00100055)
-#define MCFGPIO_PASPAR		(MCF_IPSBAR + 0x00100056)
-#define MCFGPIO_PEHLPAR		(MCF_IPSBAR + 0x00100058)
-#define MCFGPIO_PQSPAR		(MCF_IPSBAR + 0x00100059)
-#define MCFGPIO_PTCPAR		(MCF_IPSBAR + 0x0010005A)
-#define MCFGPIO_PTDPAR		(MCF_IPSBAR + 0x0010005B)
-#define MCFGPIO_PUAPAR		(MCF_IPSBAR + 0x0010005C)
-
-/*
- * PIT timer base addresses.
- */
-#define	MCFPIT_BASE1		(MCF_IPSBAR + 0x00150000)
-#define	MCFPIT_BASE2		(MCF_IPSBAR + 0x00160000)
-#define	MCFPIT_BASE3		(MCF_IPSBAR + 0x00170000)
-#define	MCFPIT_BASE4		(MCF_IPSBAR + 0x00180000)
-
-/*
- * 	Edge Port registers
- */
-#define MCFEPORT_EPPAR		(MCF_IPSBAR + 0x00130000)
-#define MCFEPORT_EPDDR		(MCF_IPSBAR + 0x00130002)
-#define MCFEPORT_EPIER		(MCF_IPSBAR + 0x00130003)
-#define MCFEPORT_EPDR		(MCF_IPSBAR + 0x00130004)
-#define MCFEPORT_EPPDR		(MCF_IPSBAR + 0x00130005)
-#define MCFEPORT_EPFR		(MCF_IPSBAR + 0x00130006)
-
-/*
- * 	Queued ADC registers
- */
-#define MCFQADC_PORTQA		(MCF_IPSBAR + 0x00190006)
-#define MCFQADC_PORTQB		(MCF_IPSBAR + 0x00190007)
-#define MCFQADC_DDRQA		(MCF_IPSBAR + 0x00190008)
-#define MCFQADC_DDRQB		(MCF_IPSBAR + 0x00190009)
-
-/*
- * 	General Purpose Timers registers
- */
-#define MCFGPTA_GPTPORT		(MCF_IPSBAR + 0x001A001D)
-#define MCFGPTA_GPTDDR		(MCF_IPSBAR + 0x001A001E)
-#define MCFGPTB_GPTPORT		(MCF_IPSBAR + 0x001B001D)
-#define MCFGPTB_GPTDDR		(MCF_IPSBAR + 0x001B001E)
-/*
- *
- * definitions for generic gpio support
- *
- */
-#define MCFGPIO_PODR		MCFGPIO_PORTA	/* port output data */
-#define MCFGPIO_PDDR		MCFGPIO_DDRA	/* port data direction */
-#define MCFGPIO_PPDR		MCFGPIO_PORTAP	/* port pin data */
-#define MCFGPIO_SETR		MCFGPIO_SETA	/* set output */
-#define MCFGPIO_CLRR		MCFGPIO_CLRA	/* clr output */
-
-#define MCFGPIO_IRQ_MAX		8
-#define MCFGPIO_IRQ_VECBASE	MCFINT_VECBASE
-#define MCFGPIO_PIN_MAX		180
-
-
-/*
- *	Derek Cheung - 6 Feb 2005
- *		add I2C and QSPI register definition using Freescale's MCF5282
- */
-/* set Port AS pin for I2C or UART */
-#define MCF5282_GPIO_PASPAR     (volatile u16 *) (MCF_IPSBAR + 0x00100056)
-
-/* Port UA Pin Assignment Register (8 Bit) */
-#define MCF5282_GPIO_PUAPAR	0x10005C
-
-/* Interrupt Mask Register Register Low */ 
-#define MCF5282_INTC0_IMRL      (volatile u32 *) (MCF_IPSBAR + 0x0C0C)
-/* Interrupt Control Register 7 */
-#define MCF5282_INTC0_ICR17     (volatile u8 *) (MCF_IPSBAR + 0x0C51)
-
-
-/*
- *  Reset Control Unit (relative to IPSBAR).
- */
-#define	MCF_RCR			(MCF_IPSBAR + 0x110000)
-#define	MCF_RSR			(MCF_IPSBAR + 0x110001)
-
-#define	MCF_RCR_SWRESET		0x80		/* Software reset bit */
-#define	MCF_RCR_FRCSTOUT	0x40		/* Force external reset */
-
-/*********************************************************************
-*
-* Inter-IC (I2C) Module
-*
-*********************************************************************/
-/* Read/Write access macros for general use */
-#define MCF5282_I2C_I2ADR       (volatile u8 *) (MCF_IPSBAR + 0x0300) // Address 
-#define MCF5282_I2C_I2FDR       (volatile u8 *) (MCF_IPSBAR + 0x0304) // Freq Divider
-#define MCF5282_I2C_I2CR        (volatile u8 *) (MCF_IPSBAR + 0x0308) // Control
-#define MCF5282_I2C_I2SR        (volatile u8 *) (MCF_IPSBAR + 0x030C) // Status
-#define MCF5282_I2C_I2DR        (volatile u8 *) (MCF_IPSBAR + 0x0310) // Data I/O
-
-/* Bit level definitions and macros */
-#define MCF5282_I2C_I2ADR_ADDR(x)                       (((x)&0x7F)<<0x01)
-
-#define MCF5282_I2C_I2FDR_IC(x)                         (((x)&0x3F))
-
-#define MCF5282_I2C_I2CR_IEN    (0x80)	// I2C enable
-#define MCF5282_I2C_I2CR_IIEN   (0x40)  // interrupt enable
-#define MCF5282_I2C_I2CR_MSTA   (0x20)  // master/slave mode
-#define MCF5282_I2C_I2CR_MTX    (0x10)  // transmit/receive mode
-#define MCF5282_I2C_I2CR_TXAK   (0x08)  // transmit acknowledge enable
-#define MCF5282_I2C_I2CR_RSTA   (0x04)  // repeat start
-
-#define MCF5282_I2C_I2SR_ICF    (0x80)  // data transfer bit
-#define MCF5282_I2C_I2SR_IAAS   (0x40)  // I2C addressed as a slave
-#define MCF5282_I2C_I2SR_IBB    (0x20)  // I2C bus busy
-#define MCF5282_I2C_I2SR_IAL    (0x10)  // aribitration lost
-#define MCF5282_I2C_I2SR_SRW    (0x04)  // slave read/write
-#define MCF5282_I2C_I2SR_IIF    (0x02)  // I2C interrupt
-#define MCF5282_I2C_I2SR_RXAK   (0x01)  // received acknowledge
-
-
-#endif	/* m528xsim_h */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/m52xxacr.h b/ANDROID_3.4.5/arch/m68k/include/asm/m52xxacr.h
deleted file mode 100644
index abc391a9..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/m52xxacr.h
+++ /dev/null
@@ -1,94 +0,0 @@
-/****************************************************************************/
-
-/*
- * m52xxacr.h -- ColdFire version 2 core cache support
- *
- * (C) Copyright 2010, Greg Ungerer <gerg@snapgear.com>
- */
-
-/****************************************************************************/
-#ifndef m52xxacr_h
-#define m52xxacr_h
-/****************************************************************************/
-
-/*
- * All varients of the ColdFire using version 2 cores have a similar
- * cache setup. Although not absolutely identical the cache register
- * definitions are compatible for all of them. Mostly they support a
- * configurable cache memory that can be instruction only, data only,
- * or split instruction and data. The exception is the very old version 2
- * core based parts, like the 5206(e), 5249 and 5272, which are instruction
- * cache only. Cache size varies from 2k up to 16k.
- */
-
-/*
- * Define the Cache Control register flags.
- */
-#define CACR_CENB	0x80000000	/* Enable cache */
-#define CACR_CDPI	0x10000000	/* Disable invalidation by CPUSHL */
-#define CACR_CFRZ	0x08000000	/* Cache freeze mode */
-#define CACR_CINV	0x01000000	/* Invalidate cache */
-#define CACR_DISI	0x00800000	/* Disable instruction cache */
-#define CACR_DISD	0x00400000	/* Disable data cache */
-#define CACR_INVI	0x00200000	/* Invalidate instruction cache */
-#define CACR_INVD	0x00100000	/* Invalidate data cache */
-#define CACR_CEIB	0x00000400	/* Non-cachable instruction burst */
-#define CACR_DCM	0x00000200	/* Default cache mode */
-#define CACR_DBWE	0x00000100	/* Buffered write enable */
-#define CACR_DWP	0x00000020	/* Write protection */
-#define CACR_EUSP	0x00000010	/* Enable separate user a7 */
-
-/*
- * Define the Access Control register flags.
- */
-#define ACR_BASE_POS	24		/* Address Base (upper 8 bits) */
-#define ACR_MASK_POS	16		/* Address Mask (next 8 bits) */
-#define ACR_ENABLE	0x00008000	/* Enable this ACR */
-#define ACR_USER	0x00000000	/* Allow only user accesses */
-#define ACR_SUPER	0x00002000	/* Allow supervisor access only */
-#define ACR_ANY		0x00004000	/* Allow any access type */
-#define ACR_CENB	0x00000000	/* Caching of region enabled */
-#define ACR_CDIS	0x00000040	/* Caching of region disabled */
-#define ACR_BWE		0x00000020	/* Write buffer enabled */
-#define ACR_WPROTECT	0x00000004	/* Write protect region */
-
-/*
- * Set the cache controller settings we will use. On the cores that support
- * a split cache configuration we allow all the combinations at Kconfig
- * time. For those cores that only have an instruction cache we just set
- * that as on.
- */
-#if defined(CONFIG_CACHE_I)
-#define CACHE_TYPE	(CACR_DISD + CACR_EUSP)
-#define CACHE_INVTYPEI	0
-#elif defined(CONFIG_CACHE_D)
-#define CACHE_TYPE	(CACR_DISI + CACR_EUSP)
-#define CACHE_INVTYPED	0
-#elif defined(CONFIG_CACHE_BOTH)
-#define CACHE_TYPE	CACR_EUSP
-#define CACHE_INVTYPEI	CACR_INVI
-#define CACHE_INVTYPED	CACR_INVD
-#else
-/* This is the instruction cache only devices (no split cache, no eusp) */
-#define CACHE_TYPE	0
-#define CACHE_INVTYPEI	0
-#endif
-
-#define CACHE_INIT	(CACR_CINV + CACHE_TYPE)
-#define CACHE_MODE	(CACR_CENB + CACHE_TYPE + CACR_DCM)
-
-#define CACHE_INVALIDATE  (CACHE_MODE + CACR_CINV)
-#if defined(CACHE_INVTYPEI)
-#define CACHE_INVALIDATEI (CACHE_MODE + CACR_CINV + CACHE_INVTYPEI)
-#endif
-#if defined(CACHE_INVTYPED)
-#define CACHE_INVALIDATED (CACHE_MODE + CACR_CINV + CACHE_INVTYPED)
-#endif
-
-#define ACR0_MODE	((CONFIG_RAMBASE & 0xff000000) + \
-			 (0x000f0000) + \
-			 (ACR_ENABLE + ACR_ANY + ACR_CENB + ACR_BWE))
-#define ACR1_MODE	0
-
-/****************************************************************************/
-#endif  /* m52xxsim_h */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/m5307sim.h b/ANDROID_3.4.5/arch/m68k/include/asm/m5307sim.h
deleted file mode 100644
index 3bc3adaa..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/m5307sim.h
+++ /dev/null
@@ -1,183 +0,0 @@
-/****************************************************************************/
-
-/*
- *	m5307sim.h -- ColdFire 5307 System Integration Module support.
- *
- *	(C) Copyright 1999,  Moreton Bay Ventures Pty Ltd.
- *	(C) Copyright 1999,  Lineo (www.lineo.com)
- *
- *      Modified by David W. Miller for the MCF5307 Eval Board.
- */
-
-/****************************************************************************/
-#ifndef	m5307sim_h
-#define	m5307sim_h
-/****************************************************************************/
-
-#define	CPU_NAME		"COLDFIRE(m5307)"
-#define	CPU_INSTR_PER_JIFFY	3
-#define	MCF_BUSCLK		(MCF_CLK / 2)
-
-#include <asm/m53xxacr.h>
-
-/*
- *	Define the 5307 SIM register set addresses.
- */
-#define	MCFSIM_RSR		0x00		/* Reset Status reg (r/w) */
-#define	MCFSIM_SYPCR		0x01		/* System Protection reg (r/w)*/
-#define	MCFSIM_SWIVR		0x02		/* SW Watchdog intr reg (r/w) */
-#define	MCFSIM_SWSR		0x03		/* SW Watchdog service (r/w) */
-#define	MCFSIM_PAR		0x04		/* Pin Assignment reg (r/w) */
-#define	MCFSIM_IRQPAR		0x06		/* Interrupt Assignment reg (r/w) */
-#define	MCFSIM_PLLCR		0x08		/* PLL Control Reg*/
-#define	MCFSIM_MPARK		0x0C		/* BUS Master Control Reg*/
-#define	MCFSIM_IPR		0x40		/* Interrupt Pend reg (r/w) */
-#define	MCFSIM_IMR		0x44		/* Interrupt Mask reg (r/w) */
-#define	MCFSIM_AVR		0x4b		/* Autovector Ctrl reg (r/w) */
-#define	MCFSIM_ICR0		0x4c		/* Intr Ctrl reg 0 (r/w) */
-#define	MCFSIM_ICR1		0x4d		/* Intr Ctrl reg 1 (r/w) */
-#define	MCFSIM_ICR2		0x4e		/* Intr Ctrl reg 2 (r/w) */
-#define	MCFSIM_ICR3		0x4f		/* Intr Ctrl reg 3 (r/w) */
-#define	MCFSIM_ICR4		0x50		/* Intr Ctrl reg 4 (r/w) */
-#define	MCFSIM_ICR5		0x51		/* Intr Ctrl reg 5 (r/w) */
-#define	MCFSIM_ICR6		0x52		/* Intr Ctrl reg 6 (r/w) */
-#define	MCFSIM_ICR7		0x53		/* Intr Ctrl reg 7 (r/w) */
-#define	MCFSIM_ICR8		0x54		/* Intr Ctrl reg 8 (r/w) */
-#define	MCFSIM_ICR9		0x55		/* Intr Ctrl reg 9 (r/w) */
-#define	MCFSIM_ICR10		0x56		/* Intr Ctrl reg 10 (r/w) */
-#define	MCFSIM_ICR11		0x57		/* Intr Ctrl reg 11 (r/w) */
-
-#define MCFSIM_CSAR0		0x80		/* CS 0 Address 0 reg (r/w) */
-#define MCFSIM_CSMR0		0x84		/* CS 0 Mask 0 reg (r/w) */
-#define MCFSIM_CSCR0		0x8a		/* CS 0 Control reg (r/w) */
-#define MCFSIM_CSAR1		0x8c		/* CS 1 Address reg (r/w) */
-#define MCFSIM_CSMR1		0x90		/* CS 1 Mask reg (r/w) */
-#define MCFSIM_CSCR1		0x96		/* CS 1 Control reg (r/w) */
-
-#ifdef CONFIG_OLDMASK
-#define MCFSIM_CSBAR		0x98		/* CS Base Address reg (r/w) */
-#define MCFSIM_CSBAMR		0x9c		/* CS Base Mask reg (r/w) */
-#define MCFSIM_CSMR2		0x9e		/* CS 2 Mask reg (r/w) */
-#define MCFSIM_CSCR2		0xa2		/* CS 2 Control reg (r/w) */
-#define MCFSIM_CSMR3		0xaa		/* CS 3 Mask reg (r/w) */
-#define MCFSIM_CSCR3		0xae		/* CS 3 Control reg (r/w) */
-#define MCFSIM_CSMR4		0xb6		/* CS 4 Mask reg (r/w) */
-#define MCFSIM_CSCR4		0xba		/* CS 4 Control reg (r/w) */
-#define MCFSIM_CSMR5		0xc2		/* CS 5 Mask reg (r/w) */
-#define MCFSIM_CSCR5		0xc6		/* CS 5 Control reg (r/w) */
-#define MCFSIM_CSMR6		0xce		/* CS 6 Mask reg (r/w) */
-#define MCFSIM_CSCR6		0xd2		/* CS 6 Control reg (r/w) */
-#define MCFSIM_CSMR7		0xda		/* CS 7 Mask reg (r/w) */
-#define MCFSIM_CSCR7		0xde		/* CS 7 Control reg (r/w) */
-#else
-#define MCFSIM_CSAR2		0x98		/* CS 2 Address reg (r/w) */
-#define MCFSIM_CSMR2		0x9c		/* CS 2 Mask reg (r/w) */
-#define MCFSIM_CSCR2		0xa2		/* CS 2 Control reg (r/w) */
-#define MCFSIM_CSAR3		0xa4		/* CS 3 Address reg (r/w) */
-#define MCFSIM_CSMR3		0xa8		/* CS 3 Mask reg (r/w) */
-#define MCFSIM_CSCR3		0xae		/* CS 3 Control reg (r/w) */
-#define MCFSIM_CSAR4		0xb0		/* CS 4 Address reg (r/w) */
-#define MCFSIM_CSMR4		0xb4		/* CS 4 Mask reg (r/w) */
-#define MCFSIM_CSCR4		0xba		/* CS 4 Control reg (r/w) */
-#define MCFSIM_CSAR5		0xbc		/* CS 5 Address reg (r/w) */
-#define MCFSIM_CSMR5		0xc0		/* CS 5 Mask reg (r/w) */
-#define MCFSIM_CSCR5		0xc6		/* CS 5 Control reg (r/w) */
-#define MCFSIM_CSAR6		0xc8		/* CS 6 Address reg (r/w) */
-#define MCFSIM_CSMR6		0xcc		/* CS 6 Mask reg (r/w) */
-#define MCFSIM_CSCR6		0xd2		/* CS 6 Control reg (r/w) */
-#define MCFSIM_CSAR7		0xd4		/* CS 7 Address reg (r/w) */
-#define MCFSIM_CSMR7		0xd8		/* CS 7 Mask reg (r/w) */
-#define MCFSIM_CSCR7		0xde		/* CS 7 Control reg (r/w) */
-#endif /* CONFIG_OLDMASK */
-
-#define MCFSIM_DCR		(MCF_MBAR + 0x100)	/* DRAM Control */
-#define MCFSIM_DACR0		(MCF_MBAR + 0x108)	/* DRAM Addr/Ctrl 0 */
-#define MCFSIM_DMR0		(MCF_MBAR + 0x10c)	/* DRAM Mask 0 */
-#define MCFSIM_DACR1		(MCF_MBAR + 0x110)	/* DRAM Addr/Ctrl 1 */
-#define MCFSIM_DMR1		(MCF_MBAR + 0x114)	/* DRAM Mask 1 */
-
-/*
- *  Timer module.
- */
-#define MCFTIMER_BASE1		(MCF_MBAR + 0x140)	/* Base of TIMER1 */
-#define MCFTIMER_BASE2		(MCF_MBAR + 0x180)	/* Base of TIMER2 */
-
-#define	MCFSIM_PADDR		(MCF_MBAR + 0x244)
-#define	MCFSIM_PADAT		(MCF_MBAR + 0x248)
-
-/*
- *  DMA unit base addresses.
- */
-#define MCFDMA_BASE0		(MCF_MBAR + 0x300)	/* Base address DMA 0 */
-#define MCFDMA_BASE1		(MCF_MBAR + 0x340)	/* Base address DMA 1 */
-#define MCFDMA_BASE2		(MCF_MBAR + 0x380)	/* Base address DMA 2 */
-#define MCFDMA_BASE3		(MCF_MBAR + 0x3C0)	/* Base address DMA 3 */
-
-/*
- *  UART module.
- */
-#if defined(CONFIG_NETtel) || defined(CONFIG_SECUREEDGEMP3)
-#define MCFUART_BASE0		(MCF_MBAR + 0x200)	/* Base address UART0 */
-#define MCFUART_BASE1		(MCF_MBAR + 0x1c0)	/* Base address UART1 */
-#else
-#define MCFUART_BASE0		(MCF_MBAR + 0x1c0)	/* Base address UART0 */
-#define MCFUART_BASE1		(MCF_MBAR + 0x200)	/* Base address UART1 */
-#endif
-
-/*
- * Generic GPIO support
- */
-#define MCFGPIO_PIN_MAX			16
-#define MCFGPIO_IRQ_MAX			-1
-#define MCFGPIO_IRQ_VECBASE		-1
-
-
-/* Definition offset address for CS2-7  -- old mask 5307 */
-
-#define	MCF5307_CS2		(0x400000)
-#define	MCF5307_CS3		(0x600000)
-#define	MCF5307_CS4		(0x800000)
-#define	MCF5307_CS5		(0xA00000)
-#define	MCF5307_CS6		(0xC00000)
-#define	MCF5307_CS7		(0xE00000)
-
-
-/*
- *	Some symbol defines for the above...
- */
-#define	MCFSIM_SWDICR		MCFSIM_ICR0	/* Watchdog timer ICR */
-#define	MCFSIM_TIMER1ICR	MCFSIM_ICR1	/* Timer 1 ICR */
-#define	MCFSIM_TIMER2ICR	MCFSIM_ICR2	/* Timer 2 ICR */
-#define	MCFSIM_UART1ICR		MCFSIM_ICR4	/* UART 1 ICR */
-#define	MCFSIM_UART2ICR		MCFSIM_ICR5	/* UART 2 ICR */
-#define	MCFSIM_DMA0ICR		MCFSIM_ICR6	/* DMA 0 ICR */
-#define	MCFSIM_DMA1ICR		MCFSIM_ICR7	/* DMA 1 ICR */
-#define	MCFSIM_DMA2ICR		MCFSIM_ICR8	/* DMA 2 ICR */
-#define	MCFSIM_DMA3ICR		MCFSIM_ICR9	/* DMA 3 ICR */
-
-
-/*
- *	Some symbol defines for the Parallel Port Pin Assignment Register
- */
-#define MCFSIM_PAR_DREQ0        0x40            /* Set to select DREQ0 input */
-                                                /* Clear to select par I/O */
-#define MCFSIM_PAR_DREQ1        0x20            /* Select DREQ1 input */
-                                                /* Clear to select par I/O */
-
-/*
- *       Defines for the IRQPAR Register
- */
-#define IRQ5_LEVEL4	0x80
-#define IRQ3_LEVEL6	0x40
-#define IRQ1_LEVEL2	0x20
-
-/*
- *	Define system peripheral IRQ usage.
- */
-#define	MCF_IRQ_TIMER		30		/* Timer0, Level 6 */
-#define	MCF_IRQ_PROFILER	31		/* Timer1, Level 7 */
-#define	MCF_IRQ_UART0		73		/* UART0 */
-#define	MCF_IRQ_UART1		74		/* UART1 */
-
-/****************************************************************************/
-#endif	/* m5307sim_h */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/m532xsim.h b/ANDROID_3.4.5/arch/m68k/include/asm/m532xsim.h
deleted file mode 100644
index 29b66e21..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/m532xsim.h
+++ /dev/null
@@ -1,2263 +0,0 @@
-/****************************************************************************/
-
-/*
- *	m532xsim.h -- ColdFire 5329 registers
- */
-
-/****************************************************************************/
-#ifndef	m532xsim_h
-#define	m532xsim_h
-/****************************************************************************/
-
-#define	CPU_NAME		"COLDFIRE(m532x)"
-#define	CPU_INSTR_PER_JIFFY	3
-#define	MCF_BUSCLK		(MCF_CLK / 3)
-
-#include <asm/m53xxacr.h>
-
-#define MCF_REG32(x) (*(volatile unsigned long  *)(x))
-#define MCF_REG16(x) (*(volatile unsigned short *)(x))
-#define MCF_REG08(x) (*(volatile unsigned char  *)(x))
-
-#define MCFINT_VECBASE      64
-#define MCFINT_UART0        26          /* Interrupt number for UART0 */
-#define MCFINT_UART1        27          /* Interrupt number for UART1 */
-#define MCFINT_UART2        28          /* Interrupt number for UART2 */
-#define MCFINT_QSPI         31          /* Interrupt number for QSPI */
-#define MCFINT_FECRX0	    36		/* Interrupt number for FEC */
-#define MCFINT_FECTX0	    40		/* Interrupt number for FEC */
-#define MCFINT_FECENTC0	    42		/* Interrupt number for FEC */
-
-#define MCF_IRQ_UART0       (MCFINT_VECBASE + MCFINT_UART0)
-#define MCF_IRQ_UART1       (MCFINT_VECBASE + MCFINT_UART1)
-#define MCF_IRQ_UART2       (MCFINT_VECBASE + MCFINT_UART2)
-
-#define MCF_IRQ_FECRX0	    (MCFINT_VECBASE + MCFINT_FECRX0)
-#define MCF_IRQ_FECTX0	    (MCFINT_VECBASE + MCFINT_FECTX0)
-#define MCF_IRQ_FECENTC0    (MCFINT_VECBASE + MCFINT_FECENTC0)
-
-#define	MCF_IRQ_QSPI	    (MCFINT_VECBASE + MCFINT_QSPI)
-
-#define MCF_WTM_WCR	MCF_REG16(0xFC098000)
-
-/*
- *	Define the 532x SIM register set addresses.
- */
-#define	MCFSIM_IPRL		0xFC048004
-#define	MCFSIM_IPRH		0xFC048000
-#define	MCFSIM_IPR		MCFSIM_IPRL
-#define	MCFSIM_IMRL		0xFC04800C
-#define	MCFSIM_IMRH		0xFC048008
-#define	MCFSIM_IMR		MCFSIM_IMRL
-#define	MCFSIM_ICR0		0xFC048040	
-#define	MCFSIM_ICR1		0xFC048041	
-#define	MCFSIM_ICR2		0xFC048042	
-#define	MCFSIM_ICR3		0xFC048043	
-#define	MCFSIM_ICR4		0xFC048044	
-#define	MCFSIM_ICR5		0xFC048045	
-#define	MCFSIM_ICR6		0xFC048046	
-#define	MCFSIM_ICR7		0xFC048047	
-#define	MCFSIM_ICR8		0xFC048048	
-#define	MCFSIM_ICR9		0xFC048049	
-#define	MCFSIM_ICR10		0xFC04804A
-#define	MCFSIM_ICR11		0xFC04804B
-
-/*
- *	Some symbol defines for the above...
- */
-#define	MCFSIM_SWDICR		MCFSIM_ICR0	/* Watchdog timer ICR */
-#define	MCFSIM_TIMER1ICR	MCFSIM_ICR1	/* Timer 1 ICR */
-#define	MCFSIM_TIMER2ICR	MCFSIM_ICR2	/* Timer 2 ICR */
-#define	MCFSIM_UART1ICR		MCFSIM_ICR4	/* UART 1 ICR */
-#define	MCFSIM_UART2ICR		MCFSIM_ICR5	/* UART 2 ICR */
-#define	MCFSIM_DMA0ICR		MCFSIM_ICR6	/* DMA 0 ICR */
-#define	MCFSIM_DMA1ICR		MCFSIM_ICR7	/* DMA 1 ICR */
-#define	MCFSIM_DMA2ICR		MCFSIM_ICR8	/* DMA 2 ICR */
-#define	MCFSIM_DMA3ICR		MCFSIM_ICR9	/* DMA 3 ICR */
-
-
-#define	MCFINTC0_SIMR		0xFC04801C
-#define	MCFINTC0_CIMR		0xFC04801D
-#define	MCFINTC0_ICR0		0xFC048040
-#define	MCFINTC1_SIMR		0xFC04C01C
-#define	MCFINTC1_CIMR		0xFC04C01D
-#define	MCFINTC1_ICR0		0xFC04C040
-
-#define MCFSIM_ICR_TIMER1	(0xFC048040+32)
-#define MCFSIM_ICR_TIMER2	(0xFC048040+33)
-
-/*
- *	Define system peripheral IRQ usage.
- */
-#define	MCF_IRQ_TIMER		(64 + 32)	/* Timer0 */
-#define	MCF_IRQ_PROFILER	(64 + 33)	/* Timer1 */
-
-/*
- *  UART module.
- */
-#define MCFUART_BASE0		0xFC060000	/* Base address of UART1 */
-#define MCFUART_BASE1		0xFC064000	/* Base address of UART2 */
-#define MCFUART_BASE2		0xFC068000	/* Base address of UART3 */
-
-/*
- *  FEC module.
- */
-#define	MCFFEC_BASE0		0xFC030000	/* Base address of FEC0 */
-#define	MCFFEC_SIZE0		0x800		/* Size of FEC0 region */
-
-/*
- *  QSPI module.
- */
-#define	MCFQSPI_BASE		0xFC058000	/* Base address of QSPI */
-#define	MCFQSPI_SIZE		0x40		/* Size of QSPI region */
-
-#define	MCFQSPI_CS0		84
-#define	MCFQSPI_CS1		85
-#define	MCFQSPI_CS2		86
-
-/*
- *  Timer module.
- */
-#define MCFTIMER_BASE1		0xFC070000	/* Base address of TIMER1 */
-#define MCFTIMER_BASE2		0xFC074000	/* Base address of TIMER2 */
-#define MCFTIMER_BASE3		0xFC078000	/* Base address of TIMER3 */
-#define MCFTIMER_BASE4		0xFC07C000	/* Base address of TIMER4 */
-
-/*********************************************************************
- *
- * Reset Controller Module
- *
- *********************************************************************/
-
-#define	MCF_RCR			0xFC0A0000
-#define	MCF_RSR			0xFC0A0001
-
-#define	MCF_RCR_SWRESET		0x80		/* Software reset bit */
-#define	MCF_RCR_FRCSTOUT	0x40		/* Force external reset */
-
-/*********************************************************************
- *
- * Inter-IC (I2C) Module
- *
- *********************************************************************/
-
-/* Read/Write access macros for general use */
-#define MCF532x_I2C_I2ADR       (volatile u8 *) (0xFC058000) // Address 
-#define MCF532x_I2C_I2FDR       (volatile u8 *) (0xFC058004) // Freq Divider
-#define MCF532x_I2C_I2CR        (volatile u8 *) (0xFC058008) // Control
-#define MCF532x_I2C_I2SR        (volatile u8 *) (0xFC05800C) // Status
-#define MCF532x_I2C_I2DR        (volatile u8 *) (0xFC058010) // Data I/O
-
-/* Bit level definitions and macros */
-#define MCF532x_I2C_I2ADR_ADDR(x)                       (((x)&0x7F)<<0x01)
-
-#define MCF532x_I2C_I2FDR_IC(x)                         (((x)&0x3F))
-
-#define MCF532x_I2C_I2CR_IEN    (0x80)	// I2C enable
-#define MCF532x_I2C_I2CR_IIEN   (0x40)  // interrupt enable
-#define MCF532x_I2C_I2CR_MSTA   (0x20)  // master/slave mode
-#define MCF532x_I2C_I2CR_MTX    (0x10)  // transmit/receive mode
-#define MCF532x_I2C_I2CR_TXAK   (0x08)  // transmit acknowledge enable
-#define MCF532x_I2C_I2CR_RSTA   (0x04)  // repeat start
-
-#define MCF532x_I2C_I2SR_ICF    (0x80)  // data transfer bit
-#define MCF532x_I2C_I2SR_IAAS   (0x40)  // I2C addressed as a slave
-#define MCF532x_I2C_I2SR_IBB    (0x20)  // I2C bus busy
-#define MCF532x_I2C_I2SR_IAL    (0x10)  // aribitration lost
-#define MCF532x_I2C_I2SR_SRW    (0x04)  // slave read/write
-#define MCF532x_I2C_I2SR_IIF    (0x02)  // I2C interrupt
-#define MCF532x_I2C_I2SR_RXAK   (0x01)  // received acknowledge
-
-#define MCF532x_PAR_FECI2C	(volatile u8 *) (0xFC0A4053)
-
-
-/*
- *	The M5329EVB board needs a help getting its devices initialized 
- *	at kernel start time if dBUG doesn't set it up (for example 
- *	it is not used), so we need to do it manually.
- */
-#ifdef __ASSEMBLER__
-.macro m5329EVB_setup
-	movel	#0xFC098000, %a7
-	movel	#0x0, (%a7)
-#define CORE_SRAM	0x80000000	
-#define CORE_SRAM_SIZE	0x8000
-	movel	#CORE_SRAM, %d0
-	addl	#0x221, %d0
-	movec	%d0,%RAMBAR1
-	movel	#CORE_SRAM, %sp
-	addl	#CORE_SRAM_SIZE, %sp
-	jsr	sysinit
-.endm
-#define	PLATFORM_SETUP	m5329EVB_setup
-
-#endif /* __ASSEMBLER__ */
-
-/*********************************************************************
- *
- * Chip Configuration Module (CCM)
- *
- *********************************************************************/
-
-/* Register read/write macros */
-#define MCF_CCM_CCR               MCF_REG16(0xFC0A0004)
-#define MCF_CCM_RCON              MCF_REG16(0xFC0A0008)
-#define MCF_CCM_CIR               MCF_REG16(0xFC0A000A)
-#define MCF_CCM_MISCCR            MCF_REG16(0xFC0A0010)
-#define MCF_CCM_CDR               MCF_REG16(0xFC0A0012)
-#define MCF_CCM_UHCSR             MCF_REG16(0xFC0A0014)
-#define MCF_CCM_UOCSR             MCF_REG16(0xFC0A0016)
-
-/* Bit definitions and macros for MCF_CCM_CCR */
-#define MCF_CCM_CCR_RESERVED      (0x0001)
-#define MCF_CCM_CCR_PLL_MODE      (0x0003)
-#define MCF_CCM_CCR_OSC_MODE      (0x0005)
-#define MCF_CCM_CCR_BOOTPS(x)     (((x)&0x0003)<<3|0x0001)
-#define MCF_CCM_CCR_LOAD          (0x0021)
-#define MCF_CCM_CCR_LIMP          (0x0041)
-#define MCF_CCM_CCR_CSC(x)        (((x)&0x0003)<<8|0x0001)
-
-/* Bit definitions and macros for MCF_CCM_RCON */
-#define MCF_CCM_RCON_RESERVED     (0x0001)
-#define MCF_CCM_RCON_PLL_MODE     (0x0003)
-#define MCF_CCM_RCON_OSC_MODE     (0x0005)
-#define MCF_CCM_RCON_BOOTPS(x)    (((x)&0x0003)<<3|0x0001)
-#define MCF_CCM_RCON_LOAD         (0x0021)
-#define MCF_CCM_RCON_LIMP         (0x0041)
-#define MCF_CCM_RCON_CSC(x)       (((x)&0x0003)<<8|0x0001)
-
-/* Bit definitions and macros for MCF_CCM_CIR */
-#define MCF_CCM_CIR_PRN(x)        (((x)&0x003F)<<0)
-#define MCF_CCM_CIR_PIN(x)        (((x)&0x03FF)<<6)
-
-/* Bit definitions and macros for MCF_CCM_MISCCR */
-#define MCF_CCM_MISCCR_USBSRC     (0x0001)
-#define MCF_CCM_MISCCR_USBDIV     (0x0002)
-#define MCF_CCM_MISCCR_SSI_SRC    (0x0010)
-#define MCF_CCM_MISCCR_TIM_DMA   (0x0020)
-#define MCF_CCM_MISCCR_SSI_PUS    (0x0040)
-#define MCF_CCM_MISCCR_SSI_PUE    (0x0080)
-#define MCF_CCM_MISCCR_LCD_CHEN   (0x0100)
-#define MCF_CCM_MISCCR_LIMP       (0x1000)
-#define MCF_CCM_MISCCR_PLL_LOCK   (0x2000)
-
-/* Bit definitions and macros for MCF_CCM_CDR */
-#define MCF_CCM_CDR_SSIDIV(x)     (((x)&0x000F)<<0)
-#define MCF_CCM_CDR_LPDIV(x)      (((x)&0x000F)<<8)
-
-/* Bit definitions and macros for MCF_CCM_UHCSR */
-#define MCF_CCM_UHCSR_XPDE        (0x0001)
-#define MCF_CCM_UHCSR_UHMIE       (0x0002)
-#define MCF_CCM_UHCSR_WKUP        (0x0004)
-#define MCF_CCM_UHCSR_PORTIND(x)  (((x)&0x0003)<<14)
-
-/* Bit definitions and macros for MCF_CCM_UOCSR */
-#define MCF_CCM_UOCSR_XPDE        (0x0001)
-#define MCF_CCM_UOCSR_UOMIE       (0x0002)
-#define MCF_CCM_UOCSR_WKUP        (0x0004)
-#define MCF_CCM_UOCSR_PWRFLT      (0x0008)
-#define MCF_CCM_UOCSR_SEND        (0x0010)
-#define MCF_CCM_UOCSR_VVLD        (0x0020)
-#define MCF_CCM_UOCSR_BVLD        (0x0040)
-#define MCF_CCM_UOCSR_AVLD        (0x0080)
-#define MCF_CCM_UOCSR_DPPU        (0x0100)
-#define MCF_CCM_UOCSR_DCR_VBUS    (0x0200)
-#define MCF_CCM_UOCSR_CRG_VBUS    (0x0400)
-#define MCF_CCM_UOCSR_DRV_VBUS    (0x0800)
-#define MCF_CCM_UOCSR_DMPD        (0x1000)
-#define MCF_CCM_UOCSR_DPPD        (0x2000)
-#define MCF_CCM_UOCSR_PORTIND(x)  (((x)&0x0003)<<14)
-
-/*********************************************************************
- *
- * DMA Timers (DTIM)
- *
- *********************************************************************/
-
-/* Register read/write macros */
-#define MCF_DTIM0_DTMR           MCF_REG16(0xFC070000)
-#define MCF_DTIM0_DTXMR          MCF_REG08(0xFC070002)
-#define MCF_DTIM0_DTER           MCF_REG08(0xFC070003)
-#define MCF_DTIM0_DTRR           MCF_REG32(0xFC070004)
-#define MCF_DTIM0_DTCR           MCF_REG32(0xFC070008)
-#define MCF_DTIM0_DTCN           MCF_REG32(0xFC07000C)
-#define MCF_DTIM1_DTMR           MCF_REG16(0xFC074000)
-#define MCF_DTIM1_DTXMR          MCF_REG08(0xFC074002)
-#define MCF_DTIM1_DTER           MCF_REG08(0xFC074003)
-#define MCF_DTIM1_DTRR           MCF_REG32(0xFC074004)
-#define MCF_DTIM1_DTCR           MCF_REG32(0xFC074008)
-#define MCF_DTIM1_DTCN           MCF_REG32(0xFC07400C)
-#define MCF_DTIM2_DTMR           MCF_REG16(0xFC078000)
-#define MCF_DTIM2_DTXMR          MCF_REG08(0xFC078002)
-#define MCF_DTIM2_DTER           MCF_REG08(0xFC078003)
-#define MCF_DTIM2_DTRR           MCF_REG32(0xFC078004)
-#define MCF_DTIM2_DTCR           MCF_REG32(0xFC078008)
-#define MCF_DTIM2_DTCN           MCF_REG32(0xFC07800C)
-#define MCF_DTIM3_DTMR           MCF_REG16(0xFC07C000)
-#define MCF_DTIM3_DTXMR          MCF_REG08(0xFC07C002)
-#define MCF_DTIM3_DTER           MCF_REG08(0xFC07C003)
-#define MCF_DTIM3_DTRR           MCF_REG32(0xFC07C004)
-#define MCF_DTIM3_DTCR           MCF_REG32(0xFC07C008)
-#define MCF_DTIM3_DTCN           MCF_REG32(0xFC07C00C)
-#define MCF_DTIM_DTMR(x)         MCF_REG16(0xFC070000+((x)*0x4000))
-#define MCF_DTIM_DTXMR(x)        MCF_REG08(0xFC070002+((x)*0x4000))
-#define MCF_DTIM_DTER(x)         MCF_REG08(0xFC070003+((x)*0x4000))
-#define MCF_DTIM_DTRR(x)         MCF_REG32(0xFC070004+((x)*0x4000))
-#define MCF_DTIM_DTCR(x)         MCF_REG32(0xFC070008+((x)*0x4000))
-#define MCF_DTIM_DTCN(x)         MCF_REG32(0xFC07000C+((x)*0x4000))
-
-/* Bit definitions and macros for MCF_DTIM_DTMR */
-#define MCF_DTIM_DTMR_RST        (0x0001)
-#define MCF_DTIM_DTMR_CLK(x)     (((x)&0x0003)<<1)
-#define MCF_DTIM_DTMR_FRR        (0x0008)
-#define MCF_DTIM_DTMR_ORRI       (0x0010)
-#define MCF_DTIM_DTMR_OM         (0x0020)
-#define MCF_DTIM_DTMR_CE(x)      (((x)&0x0003)<<6)
-#define MCF_DTIM_DTMR_PS(x)      (((x)&0x00FF)<<8)
-#define MCF_DTIM_DTMR_CE_ANY     (0x00C0)
-#define MCF_DTIM_DTMR_CE_FALL    (0x0080)
-#define MCF_DTIM_DTMR_CE_RISE    (0x0040)
-#define MCF_DTIM_DTMR_CE_NONE    (0x0000)
-#define MCF_DTIM_DTMR_CLK_DTIN   (0x0006)
-#define MCF_DTIM_DTMR_CLK_DIV16  (0x0004)
-#define MCF_DTIM_DTMR_CLK_DIV1   (0x0002)
-#define MCF_DTIM_DTMR_CLK_STOP   (0x0000)
-
-/* Bit definitions and macros for MCF_DTIM_DTXMR */
-#define MCF_DTIM_DTXMR_MODE16    (0x01)
-#define MCF_DTIM_DTXMR_DMAEN     (0x80)
-
-/* Bit definitions and macros for MCF_DTIM_DTER */
-#define MCF_DTIM_DTER_CAP        (0x01)
-#define MCF_DTIM_DTER_REF        (0x02)
-
-/* Bit definitions and macros for MCF_DTIM_DTRR */
-#define MCF_DTIM_DTRR_REF(x)     (((x)&0xFFFFFFFF)<<0)
-
-/* Bit definitions and macros for MCF_DTIM_DTCR */
-#define MCF_DTIM_DTCR_CAP(x)     (((x)&0xFFFFFFFF)<<0)
-
-/* Bit definitions and macros for MCF_DTIM_DTCN */
-#define MCF_DTIM_DTCN_CNT(x)     (((x)&0xFFFFFFFF)<<0)
-
-/*********************************************************************
- *
- * FlexBus Chip Selects (FBCS)
- *
- *********************************************************************/
-
-/* Register read/write macros */
-#define MCF_FBCS0_CSAR		MCF_REG32(0xFC008000)
-#define MCF_FBCS0_CSMR		MCF_REG32(0xFC008004)
-#define MCF_FBCS0_CSCR		MCF_REG32(0xFC008008)
-#define MCF_FBCS1_CSAR		MCF_REG32(0xFC00800C)
-#define MCF_FBCS1_CSMR		MCF_REG32(0xFC008010)
-#define MCF_FBCS1_CSCR		MCF_REG32(0xFC008014)
-#define MCF_FBCS2_CSAR		MCF_REG32(0xFC008018)
-#define MCF_FBCS2_CSMR		MCF_REG32(0xFC00801C)
-#define MCF_FBCS2_CSCR		MCF_REG32(0xFC008020)
-#define MCF_FBCS3_CSAR		MCF_REG32(0xFC008024)
-#define MCF_FBCS3_CSMR		MCF_REG32(0xFC008028)
-#define MCF_FBCS3_CSCR		MCF_REG32(0xFC00802C)
-#define MCF_FBCS4_CSAR		MCF_REG32(0xFC008030)
-#define MCF_FBCS4_CSMR		MCF_REG32(0xFC008034)
-#define MCF_FBCS4_CSCR		MCF_REG32(0xFC008038)
-#define MCF_FBCS5_CSAR		MCF_REG32(0xFC00803C)
-#define MCF_FBCS5_CSMR		MCF_REG32(0xFC008040)
-#define MCF_FBCS5_CSCR		MCF_REG32(0xFC008044)
-#define MCF_FBCS_CSAR(x)	MCF_REG32(0xFC008000+((x)*0x00C))
-#define MCF_FBCS_CSMR(x)	MCF_REG32(0xFC008004+((x)*0x00C))
-#define MCF_FBCS_CSCR(x)	MCF_REG32(0xFC008008+((x)*0x00C))
-
-/* Bit definitions and macros for MCF_FBCS_CSAR */
-#define MCF_FBCS_CSAR_BA(x)	((x)&0xFFFF0000)
-
-/* Bit definitions and macros for MCF_FBCS_CSMR */
-#define MCF_FBCS_CSMR_V		(0x00000001)
-#define MCF_FBCS_CSMR_WP	(0x00000100)
-#define MCF_FBCS_CSMR_BAM(x)	(((x)&0x0000FFFF)<<16)
-#define MCF_FBCS_CSMR_BAM_4G	(0xFFFF0000)
-#define MCF_FBCS_CSMR_BAM_2G	(0x7FFF0000)
-#define MCF_FBCS_CSMR_BAM_1G	(0x3FFF0000)
-#define MCF_FBCS_CSMR_BAM_1024M	(0x3FFF0000)
-#define MCF_FBCS_CSMR_BAM_512M	(0x1FFF0000)
-#define MCF_FBCS_CSMR_BAM_256M	(0x0FFF0000)
-#define MCF_FBCS_CSMR_BAM_128M	(0x07FF0000)
-#define MCF_FBCS_CSMR_BAM_64M	(0x03FF0000)
-#define MCF_FBCS_CSMR_BAM_32M	(0x01FF0000)
-#define MCF_FBCS_CSMR_BAM_16M	(0x00FF0000)
-#define MCF_FBCS_CSMR_BAM_8M	(0x007F0000)
-#define MCF_FBCS_CSMR_BAM_4M	(0x003F0000)
-#define MCF_FBCS_CSMR_BAM_2M	(0x001F0000)
-#define MCF_FBCS_CSMR_BAM_1M	(0x000F0000)
-#define MCF_FBCS_CSMR_BAM_1024K	(0x000F0000)
-#define MCF_FBCS_CSMR_BAM_512K	(0x00070000)
-#define MCF_FBCS_CSMR_BAM_256K	(0x00030000)
-#define MCF_FBCS_CSMR_BAM_128K	(0x00010000)
-#define MCF_FBCS_CSMR_BAM_64K	(0x00000000)
-
-/* Bit definitions and macros for MCF_FBCS_CSCR */
-#define MCF_FBCS_CSCR_BSTW	(0x00000008)
-#define MCF_FBCS_CSCR_BSTR	(0x00000010)
-#define MCF_FBCS_CSCR_BEM	(0x00000020)
-#define MCF_FBCS_CSCR_PS(x)	(((x)&0x00000003)<<6)
-#define MCF_FBCS_CSCR_AA	(0x00000100)
-#define MCF_FBCS_CSCR_SBM	(0x00000200)
-#define MCF_FBCS_CSCR_WS(x)	(((x)&0x0000003F)<<10)
-#define MCF_FBCS_CSCR_WRAH(x)	(((x)&0x00000003)<<16)
-#define MCF_FBCS_CSCR_RDAH(x)	(((x)&0x00000003)<<18)
-#define MCF_FBCS_CSCR_ASET(x)	(((x)&0x00000003)<<20)
-#define MCF_FBCS_CSCR_SWSEN	(0x00800000)
-#define MCF_FBCS_CSCR_SWS(x)	(((x)&0x0000003F)<<26)
-#define MCF_FBCS_CSCR_PS_8	(0x0040)
-#define MCF_FBCS_CSCR_PS_16	(0x0080)
-#define MCF_FBCS_CSCR_PS_32	(0x0000)
-
-/*********************************************************************
- *
- * General Purpose I/O (GPIO)
- *
- *********************************************************************/
-
-/* Register read/write macros */
-#define MCFGPIO_PODR_FECH		(0xFC0A4000)
-#define MCFGPIO_PODR_FECL		(0xFC0A4001)
-#define MCFGPIO_PODR_SSI		(0xFC0A4002)
-#define MCFGPIO_PODR_BUSCTL		(0xFC0A4003)
-#define MCFGPIO_PODR_BE			(0xFC0A4004)
-#define MCFGPIO_PODR_CS			(0xFC0A4005)
-#define MCFGPIO_PODR_PWM		(0xFC0A4006)
-#define MCFGPIO_PODR_FECI2C		(0xFC0A4007)
-#define MCFGPIO_PODR_UART		(0xFC0A4009)
-#define MCFGPIO_PODR_QSPI		(0xFC0A400A)
-#define MCFGPIO_PODR_TIMER		(0xFC0A400B)
-#define MCFGPIO_PODR_LCDDATAH		(0xFC0A400D)
-#define MCFGPIO_PODR_LCDDATAM		(0xFC0A400E)
-#define MCFGPIO_PODR_LCDDATAL		(0xFC0A400F)
-#define MCFGPIO_PODR_LCDCTLH		(0xFC0A4010)
-#define MCFGPIO_PODR_LCDCTLL		(0xFC0A4011)
-#define MCFGPIO_PDDR_FECH		(0xFC0A4014)
-#define MCFGPIO_PDDR_FECL		(0xFC0A4015)
-#define MCFGPIO_PDDR_SSI		(0xFC0A4016)
-#define MCFGPIO_PDDR_BUSCTL		(0xFC0A4017)
-#define MCFGPIO_PDDR_BE			(0xFC0A4018)
-#define MCFGPIO_PDDR_CS			(0xFC0A4019)
-#define MCFGPIO_PDDR_PWM		(0xFC0A401A)
-#define MCFGPIO_PDDR_FECI2C		(0xFC0A401B)
-#define MCFGPIO_PDDR_UART		(0xFC0A401C)
-#define MCFGPIO_PDDR_QSPI		(0xFC0A401E)
-#define MCFGPIO_PDDR_TIMER		(0xFC0A401F)
-#define MCFGPIO_PDDR_LCDDATAH		(0xFC0A4021)
-#define MCFGPIO_PDDR_LCDDATAM		(0xFC0A4022)
-#define MCFGPIO_PDDR_LCDDATAL		(0xFC0A4023)
-#define MCFGPIO_PDDR_LCDCTLH		(0xFC0A4024)
-#define MCFGPIO_PDDR_LCDCTLL		(0xFC0A4025)
-#define MCFGPIO_PPDSDR_FECH		(0xFC0A4028)
-#define MCFGPIO_PPDSDR_FECL		(0xFC0A4029)
-#define MCFGPIO_PPDSDR_SSI		(0xFC0A402A)
-#define MCFGPIO_PPDSDR_BUSCTL		(0xFC0A402B)
-#define MCFGPIO_PPDSDR_BE		(0xFC0A402C)
-#define MCFGPIO_PPDSDR_CS		(0xFC0A402D)
-#define MCFGPIO_PPDSDR_PWM		(0xFC0A402E)
-#define MCFGPIO_PPDSDR_FECI2C		(0xFC0A402F)
-#define MCFGPIO_PPDSDR_UART		(0xFC0A4031)
-#define MCFGPIO_PPDSDR_QSPI		(0xFC0A4032)
-#define MCFGPIO_PPDSDR_TIMER		(0xFC0A4033)
-#define MCFGPIO_PPDSDR_LCDDATAH		(0xFC0A4035)
-#define MCFGPIO_PPDSDR_LCDDATAM		(0xFC0A4036)
-#define MCFGPIO_PPDSDR_LCDDATAL		(0xFC0A4037)
-#define MCFGPIO_PPDSDR_LCDCTLH		(0xFC0A4038)
-#define MCFGPIO_PPDSDR_LCDCTLL		(0xFC0A4039)
-#define MCFGPIO_PCLRR_FECH		(0xFC0A403C)
-#define MCFGPIO_PCLRR_FECL		(0xFC0A403D)
-#define MCFGPIO_PCLRR_SSI		(0xFC0A403E)
-#define MCFGPIO_PCLRR_BUSCTL		(0xFC0A403F)
-#define MCFGPIO_PCLRR_BE		(0xFC0A4040)
-#define MCFGPIO_PCLRR_CS		(0xFC0A4041)
-#define MCFGPIO_PCLRR_PWM		(0xFC0A4042)
-#define MCFGPIO_PCLRR_FECI2C		(0xFC0A4043)
-#define MCFGPIO_PCLRR_UART		(0xFC0A4045)
-#define MCFGPIO_PCLRR_QSPI		(0xFC0A4046)
-#define MCFGPIO_PCLRR_TIMER		(0xFC0A4047)
-#define MCFGPIO_PCLRR_LCDDATAH		(0xFC0A4049)
-#define MCFGPIO_PCLRR_LCDDATAM		(0xFC0A404A)
-#define MCFGPIO_PCLRR_LCDDATAL		(0xFC0A404B)
-#define MCFGPIO_PCLRR_LCDCTLH		(0xFC0A404C)
-#define MCFGPIO_PCLRR_LCDCTLL		(0xFC0A404D)
-#define MCF_GPIO_PAR_FEC		MCF_REG08(0xFC0A4050)
-#define MCF_GPIO_PAR_PWM		MCF_REG08(0xFC0A4051)
-#define MCF_GPIO_PAR_BUSCTL		MCF_REG08(0xFC0A4052)
-#define MCF_GPIO_PAR_FECI2C		MCF_REG08(0xFC0A4053)
-#define MCF_GPIO_PAR_BE			MCF_REG08(0xFC0A4054)
-#define MCF_GPIO_PAR_CS			MCF_REG08(0xFC0A4055)
-#define MCF_GPIO_PAR_SSI		MCF_REG16(0xFC0A4056)
-#define MCF_GPIO_PAR_UART		MCF_REG16(0xFC0A4058)
-#define MCF_GPIO_PAR_QSPI		MCF_REG16(0xFC0A405A)
-#define MCF_GPIO_PAR_TIMER		MCF_REG08(0xFC0A405C)
-#define MCF_GPIO_PAR_LCDDATA		MCF_REG08(0xFC0A405D)
-#define MCF_GPIO_PAR_LCDCTL		MCF_REG16(0xFC0A405E)
-#define MCF_GPIO_PAR_IRQ		MCF_REG16(0xFC0A4060)
-#define MCF_GPIO_MSCR_FLEXBUS		MCF_REG08(0xFC0A4064)
-#define MCF_GPIO_MSCR_SDRAM		MCF_REG08(0xFC0A4065)
-#define MCF_GPIO_DSCR_I2C		MCF_REG08(0xFC0A4068)
-#define MCF_GPIO_DSCR_PWM		MCF_REG08(0xFC0A4069)
-#define MCF_GPIO_DSCR_FEC		MCF_REG08(0xFC0A406A)
-#define MCF_GPIO_DSCR_UART		MCF_REG08(0xFC0A406B)
-#define MCF_GPIO_DSCR_QSPI		MCF_REG08(0xFC0A406C)
-#define MCF_GPIO_DSCR_TIMER		MCF_REG08(0xFC0A406D)
-#define MCF_GPIO_DSCR_SSI		MCF_REG08(0xFC0A406E)
-#define MCF_GPIO_DSCR_LCD		MCF_REG08(0xFC0A406F)
-#define MCF_GPIO_DSCR_DEBUG		MCF_REG08(0xFC0A4070)
-#define MCF_GPIO_DSCR_CLKRST		MCF_REG08(0xFC0A4071)
-#define MCF_GPIO_DSCR_IRQ		MCF_REG08(0xFC0A4072)
-
-/* Bit definitions and macros for MCF_GPIO_PODR_FECH */
-#define MCF_GPIO_PODR_FECH_PODR_FECH0              (0x01)
-#define MCF_GPIO_PODR_FECH_PODR_FECH1              (0x02)
-#define MCF_GPIO_PODR_FECH_PODR_FECH2              (0x04)
-#define MCF_GPIO_PODR_FECH_PODR_FECH3              (0x08)
-#define MCF_GPIO_PODR_FECH_PODR_FECH4              (0x10)
-#define MCF_GPIO_PODR_FECH_PODR_FECH5              (0x20)
-#define MCF_GPIO_PODR_FECH_PODR_FECH6              (0x40)
-#define MCF_GPIO_PODR_FECH_PODR_FECH7              (0x80)
-
-/* Bit definitions and macros for MCF_GPIO_PODR_FECL */
-#define MCF_GPIO_PODR_FECL_PODR_FECL0              (0x01)
-#define MCF_GPIO_PODR_FECL_PODR_FECL1              (0x02)
-#define MCF_GPIO_PODR_FECL_PODR_FECL2              (0x04)
-#define MCF_GPIO_PODR_FECL_PODR_FECL3              (0x08)
-#define MCF_GPIO_PODR_FECL_PODR_FECL4              (0x10)
-#define MCF_GPIO_PODR_FECL_PODR_FECL5              (0x20)
-#define MCF_GPIO_PODR_FECL_PODR_FECL6              (0x40)
-#define MCF_GPIO_PODR_FECL_PODR_FECL7              (0x80)
-
-/* Bit definitions and macros for MCF_GPIO_PODR_SSI */
-#define MCF_GPIO_PODR_SSI_PODR_SSI0                (0x01)
-#define MCF_GPIO_PODR_SSI_PODR_SSI1                (0x02)
-#define MCF_GPIO_PODR_SSI_PODR_SSI2                (0x04)
-#define MCF_GPIO_PODR_SSI_PODR_SSI3                (0x08)
-#define MCF_GPIO_PODR_SSI_PODR_SSI4                (0x10)
-
-/* Bit definitions and macros for MCF_GPIO_PODR_BUSCTL */
-#define MCF_GPIO_PODR_BUSCTL_POSDR_BUSCTL0         (0x01)
-#define MCF_GPIO_PODR_BUSCTL_PODR_BUSCTL1          (0x02)
-#define MCF_GPIO_PODR_BUSCTL_PODR_BUSCTL2          (0x04)
-#define MCF_GPIO_PODR_BUSCTL_PODR_BUSCTL3          (0x08)
-
-/* Bit definitions and macros for MCF_GPIO_PODR_BE */
-#define MCF_GPIO_PODR_BE_PODR_BE0                  (0x01)
-#define MCF_GPIO_PODR_BE_PODR_BE1                  (0x02)
-#define MCF_GPIO_PODR_BE_PODR_BE2                  (0x04)
-#define MCF_GPIO_PODR_BE_PODR_BE3                  (0x08)
-
-/* Bit definitions and macros for MCF_GPIO_PODR_CS */
-#define MCF_GPIO_PODR_CS_PODR_CS1                  (0x02)
-#define MCF_GPIO_PODR_CS_PODR_CS2                  (0x04)
-#define MCF_GPIO_PODR_CS_PODR_CS3                  (0x08)
-#define MCF_GPIO_PODR_CS_PODR_CS4                  (0x10)
-#define MCF_GPIO_PODR_CS_PODR_CS5                  (0x20)
-
-/* Bit definitions and macros for MCF_GPIO_PODR_PWM */
-#define MCF_GPIO_PODR_PWM_PODR_PWM2                (0x04)
-#define MCF_GPIO_PODR_PWM_PODR_PWM3                (0x08)
-#define MCF_GPIO_PODR_PWM_PODR_PWM4                (0x10)
-#define MCF_GPIO_PODR_PWM_PODR_PWM5                (0x20)
-
-/* Bit definitions and macros for MCF_GPIO_PODR_FECI2C */
-#define MCF_GPIO_PODR_FECI2C_PODR_FECI2C0          (0x01)
-#define MCF_GPIO_PODR_FECI2C_PODR_FECI2C1          (0x02)
-#define MCF_GPIO_PODR_FECI2C_PODR_FECI2C2          (0x04)
-#define MCF_GPIO_PODR_FECI2C_PODR_FECI2C3          (0x08)
-
-/* Bit definitions and macros for MCF_GPIO_PODR_UART */
-#define MCF_GPIO_PODR_UART_PODR_UART0              (0x01)
-#define MCF_GPIO_PODR_UART_PODR_UART1              (0x02)
-#define MCF_GPIO_PODR_UART_PODR_UART2              (0x04)
-#define MCF_GPIO_PODR_UART_PODR_UART3              (0x08)
-#define MCF_GPIO_PODR_UART_PODR_UART4              (0x10)
-#define MCF_GPIO_PODR_UART_PODR_UART5              (0x20)
-#define MCF_GPIO_PODR_UART_PODR_UART6              (0x40)
-#define MCF_GPIO_PODR_UART_PODR_UART7              (0x80)
-
-/* Bit definitions and macros for MCF_GPIO_PODR_QSPI */
-#define MCF_GPIO_PODR_QSPI_PODR_QSPI0              (0x01)
-#define MCF_GPIO_PODR_QSPI_PODR_QSPI1              (0x02)
-#define MCF_GPIO_PODR_QSPI_PODR_QSPI2              (0x04)
-#define MCF_GPIO_PODR_QSPI_PODR_QSPI3              (0x08)
-#define MCF_GPIO_PODR_QSPI_PODR_QSPI4              (0x10)
-#define MCF_GPIO_PODR_QSPI_PODR_QSPI5              (0x20)
-
-/* Bit definitions and macros for MCF_GPIO_PODR_TIMER */
-#define MCF_GPIO_PODR_TIMER_PODR_TIMER0            (0x01)
-#define MCF_GPIO_PODR_TIMER_PODR_TIMER1            (0x02)
-#define MCF_GPIO_PODR_TIMER_PODR_TIMER2            (0x04)
-#define MCF_GPIO_PODR_TIMER_PODR_TIMER3            (0x08)
-
-/* Bit definitions and macros for MCF_GPIO_PODR_LCDDATAH */
-#define MCF_GPIO_PODR_LCDDATAH_PODR_LCDDATAH0      (0x01)
-#define MCF_GPIO_PODR_LCDDATAH_PODR_LCDDATAH1      (0x02)
-
-/* Bit definitions and macros for MCF_GPIO_PODR_LCDDATAM */
-#define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM0      (0x01)
-#define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM1      (0x02)
-#define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM2      (0x04)
-#define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM3      (0x08)
-#define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM4      (0x10)
-#define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM5      (0x20)
-#define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM6      (0x40)
-#define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM7      (0x80)
-
-/* Bit definitions and macros for MCF_GPIO_PODR_LCDDATAL */
-#define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL0      (0x01)
-#define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL1      (0x02)
-#define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL2      (0x04)
-#define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL3      (0x08)
-#define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL4      (0x10)
-#define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL5      (0x20)
-#define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL6      (0x40)
-#define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL7      (0x80)
-
-/* Bit definitions and macros for MCF_GPIO_PODR_LCDCTLH */
-#define MCF_GPIO_PODR_LCDCTLH_PODR_LCDCTLH0        (0x01)
-
-/* Bit definitions and macros for MCF_GPIO_PODR_LCDCTLL */
-#define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL0        (0x01)
-#define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL1        (0x02)
-#define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL2        (0x04)
-#define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL3        (0x08)
-#define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL4        (0x10)
-#define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL5        (0x20)
-#define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL6        (0x40)
-#define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL7        (0x80)
-
-/* Bit definitions and macros for MCF_GPIO_PDDR_FECH */
-#define MCF_GPIO_PDDR_FECH_PDDR_FECH0              (0x01)
-#define MCF_GPIO_PDDR_FECH_PDDR_FECH1              (0x02)
-#define MCF_GPIO_PDDR_FECH_PDDR_FECH2              (0x04)
-#define MCF_GPIO_PDDR_FECH_PDDR_FECH3              (0x08)
-#define MCF_GPIO_PDDR_FECH_PDDR_FECH4              (0x10)
-#define MCF_GPIO_PDDR_FECH_PDDR_FECH5              (0x20)
-#define MCF_GPIO_PDDR_FECH_PDDR_FECH6              (0x40)
-#define MCF_GPIO_PDDR_FECH_PDDR_FECH7              (0x80)
-
-/* Bit definitions and macros for MCF_GPIO_PDDR_FECL */
-#define MCF_GPIO_PDDR_FECL_PDDR_FECL0              (0x01)
-#define MCF_GPIO_PDDR_FECL_PDDR_FECL1              (0x02)
-#define MCF_GPIO_PDDR_FECL_PDDR_FECL2              (0x04)
-#define MCF_GPIO_PDDR_FECL_PDDR_FECL3              (0x08)
-#define MCF_GPIO_PDDR_FECL_PDDR_FECL4              (0x10)
-#define MCF_GPIO_PDDR_FECL_PDDR_FECL5              (0x20)
-#define MCF_GPIO_PDDR_FECL_PDDR_FECL6              (0x40)
-#define MCF_GPIO_PDDR_FECL_PDDR_FECL7              (0x80)
-
-/* Bit definitions and macros for MCF_GPIO_PDDR_SSI */
-#define MCF_GPIO_PDDR_SSI_PDDR_SSI0                (0x01)
-#define MCF_GPIO_PDDR_SSI_PDDR_SSI1                (0x02)
-#define MCF_GPIO_PDDR_SSI_PDDR_SSI2                (0x04)
-#define MCF_GPIO_PDDR_SSI_PDDR_SSI3                (0x08)
-#define MCF_GPIO_PDDR_SSI_PDDR_SSI4                (0x10)
-
-/* Bit definitions and macros for MCF_GPIO_PDDR_BUSCTL */
-#define MCF_GPIO_PDDR_BUSCTL_POSDR_BUSCTL0         (0x01)
-#define MCF_GPIO_PDDR_BUSCTL_PDDR_BUSCTL1          (0x02)
-#define MCF_GPIO_PDDR_BUSCTL_PDDR_BUSCTL2          (0x04)
-#define MCF_GPIO_PDDR_BUSCTL_PDDR_BUSCTL3          (0x08)
-
-/* Bit definitions and macros for MCF_GPIO_PDDR_BE */
-#define MCF_GPIO_PDDR_BE_PDDR_BE0                  (0x01)
-#define MCF_GPIO_PDDR_BE_PDDR_BE1                  (0x02)
-#define MCF_GPIO_PDDR_BE_PDDR_BE2                  (0x04)
-#define MCF_GPIO_PDDR_BE_PDDR_BE3                  (0x08)
-
-/* Bit definitions and macros for MCF_GPIO_PDDR_CS */
-#define MCF_GPIO_PDDR_CS_PDDR_CS1                  (0x02)
-#define MCF_GPIO_PDDR_CS_PDDR_CS2                  (0x04)
-#define MCF_GPIO_PDDR_CS_PDDR_CS3                  (0x08)
-#define MCF_GPIO_PDDR_CS_PDDR_CS4                  (0x10)
-#define MCF_GPIO_PDDR_CS_PDDR_CS5                  (0x20)
-
-/* Bit definitions and macros for MCF_GPIO_PDDR_PWM */
-#define MCF_GPIO_PDDR_PWM_PDDR_PWM2                (0x04)
-#define MCF_GPIO_PDDR_PWM_PDDR_PWM3                (0x08)
-#define MCF_GPIO_PDDR_PWM_PDDR_PWM4                (0x10)
-#define MCF_GPIO_PDDR_PWM_PDDR_PWM5                (0x20)
-
-/* Bit definitions and macros for MCF_GPIO_PDDR_FECI2C */
-#define MCF_GPIO_PDDR_FECI2C_PDDR_FECI2C0          (0x01)
-#define MCF_GPIO_PDDR_FECI2C_PDDR_FECI2C1          (0x02)
-#define MCF_GPIO_PDDR_FECI2C_PDDR_FECI2C2          (0x04)
-#define MCF_GPIO_PDDR_FECI2C_PDDR_FECI2C3          (0x08)
-
-/* Bit definitions and macros for MCF_GPIO_PDDR_UART */
-#define MCF_GPIO_PDDR_UART_PDDR_UART0              (0x01)
-#define MCF_GPIO_PDDR_UART_PDDR_UART1              (0x02)
-#define MCF_GPIO_PDDR_UART_PDDR_UART2              (0x04)
-#define MCF_GPIO_PDDR_UART_PDDR_UART3              (0x08)
-#define MCF_GPIO_PDDR_UART_PDDR_UART4              (0x10)
-#define MCF_GPIO_PDDR_UART_PDDR_UART5              (0x20)
-#define MCF_GPIO_PDDR_UART_PDDR_UART6              (0x40)
-#define MCF_GPIO_PDDR_UART_PDDR_UART7              (0x80)
-
-/* Bit definitions and macros for MCF_GPIO_PDDR_QSPI */
-#define MCF_GPIO_PDDR_QSPI_PDDR_QSPI0              (0x01)
-#define MCF_GPIO_PDDR_QSPI_PDDR_QSPI1              (0x02)
-#define MCF_GPIO_PDDR_QSPI_PDDR_QSPI2              (0x04)
-#define MCF_GPIO_PDDR_QSPI_PDDR_QSPI3              (0x08)
-#define MCF_GPIO_PDDR_QSPI_PDDR_QSPI4              (0x10)
-#define MCF_GPIO_PDDR_QSPI_PDDR_QSPI5              (0x20)
-
-/* Bit definitions and macros for MCF_GPIO_PDDR_TIMER */
-#define MCF_GPIO_PDDR_TIMER_PDDR_TIMER0            (0x01)
-#define MCF_GPIO_PDDR_TIMER_PDDR_TIMER1            (0x02)
-#define MCF_GPIO_PDDR_TIMER_PDDR_TIMER2            (0x04)
-#define MCF_GPIO_PDDR_TIMER_PDDR_TIMER3            (0x08)
-
-/* Bit definitions and macros for MCF_GPIO_PDDR_LCDDATAH */
-#define MCF_GPIO_PDDR_LCDDATAH_PDDR_LCDDATAH0      (0x01)
-#define MCF_GPIO_PDDR_LCDDATAH_PDDR_LCDDATAH1      (0x02)
-
-/* Bit definitions and macros for MCF_GPIO_PDDR_LCDDATAM */
-#define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM0      (0x01)
-#define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM1      (0x02)
-#define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM2      (0x04)
-#define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM3      (0x08)
-#define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM4      (0x10)
-#define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM5      (0x20)
-#define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM6      (0x40)
-#define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM7      (0x80)
-
-/* Bit definitions and macros for MCF_GPIO_PDDR_LCDDATAL */
-#define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL0      (0x01)
-#define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL1      (0x02)
-#define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL2      (0x04)
-#define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL3      (0x08)
-#define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL4      (0x10)
-#define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL5      (0x20)
-#define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL6      (0x40)
-#define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL7      (0x80)
-
-/* Bit definitions and macros for MCF_GPIO_PDDR_LCDCTLH */
-#define MCF_GPIO_PDDR_LCDCTLH_PDDR_LCDCTLH0        (0x01)
-
-/* Bit definitions and macros for MCF_GPIO_PDDR_LCDCTLL */
-#define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL0        (0x01)
-#define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL1        (0x02)
-#define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL2        (0x04)
-#define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL3        (0x08)
-#define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL4        (0x10)
-#define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL5        (0x20)
-#define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL6        (0x40)
-#define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL7        (0x80)
-
-/* Bit definitions and macros for MCF_GPIO_PPDSDR_FECH */
-#define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH0          (0x01)
-#define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH1          (0x02)
-#define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH2          (0x04)
-#define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH3          (0x08)
-#define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH4          (0x10)
-#define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH5          (0x20)
-#define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH6          (0x40)
-#define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH7          (0x80)
-
-/* Bit definitions and macros for MCF_GPIO_PPDSDR_FECL */
-#define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL0          (0x01)
-#define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL1          (0x02)
-#define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL2          (0x04)
-#define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL3          (0x08)
-#define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL4          (0x10)
-#define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL5          (0x20)
-#define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL6          (0x40)
-#define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL7          (0x80)
-
-/* Bit definitions and macros for MCF_GPIO_PPDSDR_SSI */
-#define MCF_GPIO_PPDSDR_SSI_PPDSDR_SSI0            (0x01)
-#define MCF_GPIO_PPDSDR_SSI_PPDSDR_SSI1            (0x02)
-#define MCF_GPIO_PPDSDR_SSI_PPDSDR_SSI2            (0x04)
-#define MCF_GPIO_PPDSDR_SSI_PPDSDR_SSI3            (0x08)
-#define MCF_GPIO_PPDSDR_SSI_PPDSDR_SSI4            (0x10)
-
-/* Bit definitions and macros for MCF_GPIO_PPDSDR_BUSCTL */
-#define MCF_GPIO_PPDSDR_BUSCTL_POSDR_BUSCTL0       (0x01)
-#define MCF_GPIO_PPDSDR_BUSCTL_PPDSDR_BUSCTL1      (0x02)
-#define MCF_GPIO_PPDSDR_BUSCTL_PPDSDR_BUSCTL2      (0x04)
-#define MCF_GPIO_PPDSDR_BUSCTL_PPDSDR_BUSCTL3      (0x08)
-
-/* Bit definitions and macros for MCF_GPIO_PPDSDR_BE */
-#define MCF_GPIO_PPDSDR_BE_PPDSDR_BE0              (0x01)
-#define MCF_GPIO_PPDSDR_BE_PPDSDR_BE1              (0x02)
-#define MCF_GPIO_PPDSDR_BE_PPDSDR_BE2              (0x04)
-#define MCF_GPIO_PPDSDR_BE_PPDSDR_BE3              (0x08)
-
-/* Bit definitions and macros for MCF_GPIO_PPDSDR_CS */
-#define MCF_GPIO_PPDSDR_CS_PPDSDR_CS1              (0x02)
-#define MCF_GPIO_PPDSDR_CS_PPDSDR_CS2              (0x04)
-#define MCF_GPIO_PPDSDR_CS_PPDSDR_CS3              (0x08)
-#define MCF_GPIO_PPDSDR_CS_PPDSDR_CS4              (0x10)
-#define MCF_GPIO_PPDSDR_CS_PPDSDR_CS5              (0x20)
-
-/* Bit definitions and macros for MCF_GPIO_PPDSDR_PWM */
-#define MCF_GPIO_PPDSDR_PWM_PPDSDR_PWM2            (0x04)
-#define MCF_GPIO_PPDSDR_PWM_PPDSDR_PWM3            (0x08)
-#define MCF_GPIO_PPDSDR_PWM_PPDSDR_PWM4            (0x10)
-#define MCF_GPIO_PPDSDR_PWM_PPDSDR_PWM5            (0x20)
-
-/* Bit definitions and macros for MCF_GPIO_PPDSDR_FECI2C */
-#define MCF_GPIO_PPDSDR_FECI2C_PPDSDR_FECI2C0      (0x01)
-#define MCF_GPIO_PPDSDR_FECI2C_PPDSDR_FECI2C1      (0x02)
-#define MCF_GPIO_PPDSDR_FECI2C_PPDSDR_FECI2C2      (0x04)
-#define MCF_GPIO_PPDSDR_FECI2C_PPDSDR_FECI2C3      (0x08)
-
-/* Bit definitions and macros for MCF_GPIO_PPDSDR_UART */
-#define MCF_GPIO_PPDSDR_UART_PPDSDR_UART0          (0x01)
-#define MCF_GPIO_PPDSDR_UART_PPDSDR_UART1          (0x02)
-#define MCF_GPIO_PPDSDR_UART_PPDSDR_UART2          (0x04)
-#define MCF_GPIO_PPDSDR_UART_PPDSDR_UART3          (0x08)
-#define MCF_GPIO_PPDSDR_UART_PPDSDR_UART4          (0x10)
-#define MCF_GPIO_PPDSDR_UART_PPDSDR_UART5          (0x20)
-#define MCF_GPIO_PPDSDR_UART_PPDSDR_UART6          (0x40)
-#define MCF_GPIO_PPDSDR_UART_PPDSDR_UART7          (0x80)
-
-/* Bit definitions and macros for MCF_GPIO_PPDSDR_QSPI */
-#define MCF_GPIO_PPDSDR_QSPI_PPDSDR_QSPI0          (0x01)
-#define MCF_GPIO_PPDSDR_QSPI_PPDSDR_QSPI1          (0x02)
-#define MCF_GPIO_PPDSDR_QSPI_PPDSDR_QSPI2          (0x04)
-#define MCF_GPIO_PPDSDR_QSPI_PPDSDR_QSPI3          (0x08)
-#define MCF_GPIO_PPDSDR_QSPI_PPDSDR_QSPI4          (0x10)
-#define MCF_GPIO_PPDSDR_QSPI_PPDSDR_QSPI5          (0x20)
-
-/* Bit definitions and macros for MCF_GPIO_PPDSDR_TIMER */
-#define MCF_GPIO_PPDSDR_TIMER_PPDSDR_TIMER0        (0x01)
-#define MCF_GPIO_PPDSDR_TIMER_PPDSDR_TIMER1        (0x02)
-#define MCF_GPIO_PPDSDR_TIMER_PPDSDR_TIMER2        (0x04)
-#define MCF_GPIO_PPDSDR_TIMER_PPDSDR_TIMER3        (0x08)
-
-/* Bit definitions and macros for MCF_GPIO_PPDSDR_LCDDATAH */
-#define MCF_GPIO_PPDSDR_LCDDATAH_PPDSDR_LCDDATAH0  (0x01)
-#define MCF_GPIO_PPDSDR_LCDDATAH_PPDSDR_LCDDATAH1  (0x02)
-
-/* Bit definitions and macros for MCF_GPIO_PPDSDR_LCDDATAM */
-#define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM0  (0x01)
-#define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM1  (0x02)
-#define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM2  (0x04)
-#define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM3  (0x08)
-#define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM4  (0x10)
-#define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM5  (0x20)
-#define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM6  (0x40)
-#define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM7  (0x80)
-
-/* Bit definitions and macros for MCF_GPIO_PPDSDR_LCDDATAL */
-#define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL0  (0x01)
-#define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL1  (0x02)
-#define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL2  (0x04)
-#define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL3  (0x08)
-#define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL4  (0x10)
-#define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL5  (0x20)
-#define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL6  (0x40)
-#define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL7  (0x80)
-
-/* Bit definitions and macros for MCF_GPIO_PPDSDR_LCDCTLH */
-#define MCF_GPIO_PPDSDR_LCDCTLH_PPDSDR_LCDCTLH0    (0x01)
-
-/* Bit definitions and macros for MCF_GPIO_PPDSDR_LCDCTLL */
-#define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL0    (0x01)
-#define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL1    (0x02)
-#define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL2    (0x04)
-#define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL3    (0x08)
-#define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL4    (0x10)
-#define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL5    (0x20)
-#define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL6    (0x40)
-#define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL7    (0x80)
-
-/* Bit definitions and macros for MCF_GPIO_PCLRR_FECH */
-#define MCF_GPIO_PCLRR_FECH_PCLRR_FECH0            (0x01)
-#define MCF_GPIO_PCLRR_FECH_PCLRR_FECH1            (0x02)
-#define MCF_GPIO_PCLRR_FECH_PCLRR_FECH2            (0x04)
-#define MCF_GPIO_PCLRR_FECH_PCLRR_FECH3            (0x08)
-#define MCF_GPIO_PCLRR_FECH_PCLRR_FECH4            (0x10)
-#define MCF_GPIO_PCLRR_FECH_PCLRR_FECH5            (0x20)
-#define MCF_GPIO_PCLRR_FECH_PCLRR_FECH6            (0x40)
-#define MCF_GPIO_PCLRR_FECH_PCLRR_FECH7            (0x80)
-
-/* Bit definitions and macros for MCF_GPIO_PCLRR_FECL */
-#define MCF_GPIO_PCLRR_FECL_PCLRR_FECL0            (0x01)
-#define MCF_GPIO_PCLRR_FECL_PCLRR_FECL1            (0x02)
-#define MCF_GPIO_PCLRR_FECL_PCLRR_FECL2            (0x04)
-#define MCF_GPIO_PCLRR_FECL_PCLRR_FECL3            (0x08)
-#define MCF_GPIO_PCLRR_FECL_PCLRR_FECL4            (0x10)
-#define MCF_GPIO_PCLRR_FECL_PCLRR_FECL5            (0x20)
-#define MCF_GPIO_PCLRR_FECL_PCLRR_FECL6            (0x40)
-#define MCF_GPIO_PCLRR_FECL_PCLRR_FECL7            (0x80)
-
-/* Bit definitions and macros for MCF_GPIO_PCLRR_SSI */
-#define MCF_GPIO_PCLRR_SSI_PCLRR_SSI0              (0x01)
-#define MCF_GPIO_PCLRR_SSI_PCLRR_SSI1              (0x02)
-#define MCF_GPIO_PCLRR_SSI_PCLRR_SSI2              (0x04)
-#define MCF_GPIO_PCLRR_SSI_PCLRR_SSI3              (0x08)
-#define MCF_GPIO_PCLRR_SSI_PCLRR_SSI4              (0x10)
-
-/* Bit definitions and macros for MCF_GPIO_PCLRR_BUSCTL */
-#define MCF_GPIO_PCLRR_BUSCTL_POSDR_BUSCTL0        (0x01)
-#define MCF_GPIO_PCLRR_BUSCTL_PCLRR_BUSCTL1        (0x02)
-#define MCF_GPIO_PCLRR_BUSCTL_PCLRR_BUSCTL2        (0x04)
-#define MCF_GPIO_PCLRR_BUSCTL_PCLRR_BUSCTL3        (0x08)
-
-/* Bit definitions and macros for MCF_GPIO_PCLRR_BE */
-#define MCF_GPIO_PCLRR_BE_PCLRR_BE0                (0x01)
-#define MCF_GPIO_PCLRR_BE_PCLRR_BE1                (0x02)
-#define MCF_GPIO_PCLRR_BE_PCLRR_BE2                (0x04)
-#define MCF_GPIO_PCLRR_BE_PCLRR_BE3                (0x08)
-
-/* Bit definitions and macros for MCF_GPIO_PCLRR_CS */
-#define MCF_GPIO_PCLRR_CS_PCLRR_CS1                (0x02)
-#define MCF_GPIO_PCLRR_CS_PCLRR_CS2                (0x04)
-#define MCF_GPIO_PCLRR_CS_PCLRR_CS3                (0x08)
-#define MCF_GPIO_PCLRR_CS_PCLRR_CS4                (0x10)
-#define MCF_GPIO_PCLRR_CS_PCLRR_CS5                (0x20)
-
-/* Bit definitions and macros for MCF_GPIO_PCLRR_PWM */
-#define MCF_GPIO_PCLRR_PWM_PCLRR_PWM2              (0x04)
-#define MCF_GPIO_PCLRR_PWM_PCLRR_PWM3              (0x08)
-#define MCF_GPIO_PCLRR_PWM_PCLRR_PWM4              (0x10)
-#define MCF_GPIO_PCLRR_PWM_PCLRR_PWM5              (0x20)
-
-/* Bit definitions and macros for MCF_GPIO_PCLRR_FECI2C */
-#define MCF_GPIO_PCLRR_FECI2C_PCLRR_FECI2C0        (0x01)
-#define MCF_GPIO_PCLRR_FECI2C_PCLRR_FECI2C1        (0x02)
-#define MCF_GPIO_PCLRR_FECI2C_PCLRR_FECI2C2        (0x04)
-#define MCF_GPIO_PCLRR_FECI2C_PCLRR_FECI2C3        (0x08)
-
-/* Bit definitions and macros for MCF_GPIO_PCLRR_UART */
-#define MCF_GPIO_PCLRR_UART_PCLRR_UART0            (0x01)
-#define MCF_GPIO_PCLRR_UART_PCLRR_UART1            (0x02)
-#define MCF_GPIO_PCLRR_UART_PCLRR_UART2            (0x04)
-#define MCF_GPIO_PCLRR_UART_PCLRR_UART3            (0x08)
-#define MCF_GPIO_PCLRR_UART_PCLRR_UART4            (0x10)
-#define MCF_GPIO_PCLRR_UART_PCLRR_UART5            (0x20)
-#define MCF_GPIO_PCLRR_UART_PCLRR_UART6            (0x40)
-#define MCF_GPIO_PCLRR_UART_PCLRR_UART7            (0x80)
-
-/* Bit definitions and macros for MCF_GPIO_PCLRR_QSPI */
-#define MCF_GPIO_PCLRR_QSPI_PCLRR_QSPI0            (0x01)
-#define MCF_GPIO_PCLRR_QSPI_PCLRR_QSPI1            (0x02)
-#define MCF_GPIO_PCLRR_QSPI_PCLRR_QSPI2            (0x04)
-#define MCF_GPIO_PCLRR_QSPI_PCLRR_QSPI3            (0x08)
-#define MCF_GPIO_PCLRR_QSPI_PCLRR_QSPI4            (0x10)
-#define MCF_GPIO_PCLRR_QSPI_PCLRR_QSPI5            (0x20)
-
-/* Bit definitions and macros for MCF_GPIO_PCLRR_TIMER */
-#define MCF_GPIO_PCLRR_TIMER_PCLRR_TIMER0          (0x01)
-#define MCF_GPIO_PCLRR_TIMER_PCLRR_TIMER1          (0x02)
-#define MCF_GPIO_PCLRR_TIMER_PCLRR_TIMER2          (0x04)
-#define MCF_GPIO_PCLRR_TIMER_PCLRR_TIMER3          (0x08)
-
-/* Bit definitions and macros for MCF_GPIO_PCLRR_LCDDATAH */
-#define MCF_GPIO_PCLRR_LCDDATAH_PCLRR_LCDDATAH0    (0x01)
-#define MCF_GPIO_PCLRR_LCDDATAH_PCLRR_LCDDATAH1    (0x02)
-
-/* Bit definitions and macros for MCF_GPIO_PCLRR_LCDDATAM */
-#define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM0    (0x01)
-#define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM1    (0x02)
-#define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM2    (0x04)
-#define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM3    (0x08)
-#define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM4    (0x10)
-#define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM5    (0x20)
-#define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM6    (0x40)
-#define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM7    (0x80)
-
-/* Bit definitions and macros for MCF_GPIO_PCLRR_LCDDATAL */
-#define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL0    (0x01)
-#define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL1    (0x02)
-#define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL2    (0x04)
-#define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL3    (0x08)
-#define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL4    (0x10)
-#define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL5    (0x20)
-#define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL6    (0x40)
-#define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL7    (0x80)
-
-/* Bit definitions and macros for MCF_GPIO_PCLRR_LCDCTLH */
-#define MCF_GPIO_PCLRR_LCDCTLH_PCLRR_LCDCTLH0      (0x01)
-
-/* Bit definitions and macros for MCF_GPIO_PCLRR_LCDCTLL */
-#define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL0      (0x01)
-#define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL1      (0x02)
-#define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL2      (0x04)
-#define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL3      (0x08)
-#define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL4      (0x10)
-#define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL5      (0x20)
-#define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL6      (0x40)
-#define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL7      (0x80)
-
-/* Bit definitions and macros for MCF_GPIO_PAR_FEC */
-#define MCF_GPIO_PAR_FEC_PAR_FEC_MII(x)            (((x)&0x03)<<0)
-#define MCF_GPIO_PAR_FEC_PAR_FEC_7W(x)             (((x)&0x03)<<2)
-#define MCF_GPIO_PAR_FEC_PAR_FEC_7W_GPIO           (0x00)
-#define MCF_GPIO_PAR_FEC_PAR_FEC_7W_URTS1          (0x04)
-#define MCF_GPIO_PAR_FEC_PAR_FEC_7W_FEC            (0x0C)
-#define MCF_GPIO_PAR_FEC_PAR_FEC_MII_GPIO          (0x00)
-#define MCF_GPIO_PAR_FEC_PAR_FEC_MII_UART          (0x01)
-#define MCF_GPIO_PAR_FEC_PAR_FEC_MII_FEC           (0x03)
-
-/* Bit definitions and macros for MCF_GPIO_PAR_PWM */
-#define MCF_GPIO_PAR_PWM_PAR_PWM1(x)               (((x)&0x03)<<0)
-#define MCF_GPIO_PAR_PWM_PAR_PWM3(x)               (((x)&0x03)<<2)
-#define MCF_GPIO_PAR_PWM_PAR_PWM5                  (0x10)
-#define MCF_GPIO_PAR_PWM_PAR_PWM7                  (0x20)
-
-/* Bit definitions and macros for MCF_GPIO_PAR_BUSCTL */
-#define MCF_GPIO_PAR_BUSCTL_PAR_TS(x)              (((x)&0x03)<<3)
-#define MCF_GPIO_PAR_BUSCTL_PAR_RWB                (0x20)
-#define MCF_GPIO_PAR_BUSCTL_PAR_TA                 (0x40)
-#define MCF_GPIO_PAR_BUSCTL_PAR_OE                 (0x80)
-#define MCF_GPIO_PAR_BUSCTL_PAR_OE_GPIO            (0x00)
-#define MCF_GPIO_PAR_BUSCTL_PAR_OE_OE              (0x80)
-#define MCF_GPIO_PAR_BUSCTL_PAR_TA_GPIO            (0x00)
-#define MCF_GPIO_PAR_BUSCTL_PAR_TA_TA              (0x40)
-#define MCF_GPIO_PAR_BUSCTL_PAR_RWB_GPIO           (0x00)
-#define MCF_GPIO_PAR_BUSCTL_PAR_RWB_RWB            (0x20)
-#define MCF_GPIO_PAR_BUSCTL_PAR_TS_GPIO            (0x00)
-#define MCF_GPIO_PAR_BUSCTL_PAR_TS_DACK0           (0x10)
-#define MCF_GPIO_PAR_BUSCTL_PAR_TS_TS              (0x18)
-
-/* Bit definitions and macros for MCF_GPIO_PAR_FECI2C */
-#define MCF_GPIO_PAR_FECI2C_PAR_SDA(x)             (((x)&0x03)<<0)
-#define MCF_GPIO_PAR_FECI2C_PAR_SCL(x)             (((x)&0x03)<<2)
-#define MCF_GPIO_PAR_FECI2C_PAR_MDIO(x)            (((x)&0x03)<<4)
-#define MCF_GPIO_PAR_FECI2C_PAR_MDC(x)             (((x)&0x03)<<6)
-#define MCF_GPIO_PAR_FECI2C_PAR_MDC_GPIO           (0x00)
-#define MCF_GPIO_PAR_FECI2C_PAR_MDC_UTXD2          (0x40)
-#define MCF_GPIO_PAR_FECI2C_PAR_MDC_SCL            (0x80)
-#define MCF_GPIO_PAR_FECI2C_PAR_MDC_EMDC           (0xC0)
-#define MCF_GPIO_PAR_FECI2C_PAR_MDIO_GPIO          (0x00)
-#define MCF_GPIO_PAR_FECI2C_PAR_MDIO_URXD2         (0x10)
-#define MCF_GPIO_PAR_FECI2C_PAR_MDIO_SDA           (0x20)
-#define MCF_GPIO_PAR_FECI2C_PAR_MDIO_EMDIO         (0x30)
-#define MCF_GPIO_PAR_FECI2C_PAR_SCL_GPIO           (0x00)
-#define MCF_GPIO_PAR_FECI2C_PAR_SCL_UTXD2          (0x04)
-#define MCF_GPIO_PAR_FECI2C_PAR_SCL_SCL            (0x0C)
-#define MCF_GPIO_PAR_FECI2C_PAR_SDA_GPIO           (0x00)
-#define MCF_GPIO_PAR_FECI2C_PAR_SDA_URXD2          (0x02)
-#define MCF_GPIO_PAR_FECI2C_PAR_SDA_SDA            (0x03)
-
-/* Bit definitions and macros for MCF_GPIO_PAR_BE */
-#define MCF_GPIO_PAR_BE_PAR_BE0                    (0x01)
-#define MCF_GPIO_PAR_BE_PAR_BE1                    (0x02)
-#define MCF_GPIO_PAR_BE_PAR_BE2                    (0x04)
-#define MCF_GPIO_PAR_BE_PAR_BE3                    (0x08)
-
-/* Bit definitions and macros for MCF_GPIO_PAR_CS */
-#define MCF_GPIO_PAR_CS_PAR_CS1                    (0x02)
-#define MCF_GPIO_PAR_CS_PAR_CS2                    (0x04)
-#define MCF_GPIO_PAR_CS_PAR_CS3                    (0x08)
-#define MCF_GPIO_PAR_CS_PAR_CS4                    (0x10)
-#define MCF_GPIO_PAR_CS_PAR_CS5                    (0x20)
-#define MCF_GPIO_PAR_CS_PAR_CS_CS1_GPIO            (0x00)
-#define MCF_GPIO_PAR_CS_PAR_CS_CS1_SDCS1           (0x01)
-#define MCF_GPIO_PAR_CS_PAR_CS_CS1_CS1             (0x03)
-
-/* Bit definitions and macros for MCF_GPIO_PAR_SSI */
-#define MCF_GPIO_PAR_SSI_PAR_MCLK                  (0x0080)
-#define MCF_GPIO_PAR_SSI_PAR_TXD(x)                (((x)&0x0003)<<8)
-#define MCF_GPIO_PAR_SSI_PAR_RXD(x)                (((x)&0x0003)<<10)
-#define MCF_GPIO_PAR_SSI_PAR_FS(x)                 (((x)&0x0003)<<12)
-#define MCF_GPIO_PAR_SSI_PAR_BCLK(x)               (((x)&0x0003)<<14)
-
-/* Bit definitions and macros for MCF_GPIO_PAR_UART */
-#define MCF_GPIO_PAR_UART_PAR_UTXD0                (0x0001)
-#define MCF_GPIO_PAR_UART_PAR_URXD0                (0x0002)
-#define MCF_GPIO_PAR_UART_PAR_URTS0                (0x0004)
-#define MCF_GPIO_PAR_UART_PAR_UCTS0                (0x0008)
-#define MCF_GPIO_PAR_UART_PAR_UTXD1(x)             (((x)&0x0003)<<4)
-#define MCF_GPIO_PAR_UART_PAR_URXD1(x)             (((x)&0x0003)<<6)
-#define MCF_GPIO_PAR_UART_PAR_URTS1(x)             (((x)&0x0003)<<8)
-#define MCF_GPIO_PAR_UART_PAR_UCTS1(x)             (((x)&0x0003)<<10)
-#define MCF_GPIO_PAR_UART_PAR_UCTS1_GPIO           (0x0000)
-#define MCF_GPIO_PAR_UART_PAR_UCTS1_SSI_BCLK       (0x0800)
-#define MCF_GPIO_PAR_UART_PAR_UCTS1_ULPI_D7        (0x0400)
-#define MCF_GPIO_PAR_UART_PAR_UCTS1_UCTS1          (0x0C00)
-#define MCF_GPIO_PAR_UART_PAR_URTS1_GPIO           (0x0000)
-#define MCF_GPIO_PAR_UART_PAR_URTS1_SSI_FS         (0x0200)
-#define MCF_GPIO_PAR_UART_PAR_URTS1_ULPI_D6        (0x0100)
-#define MCF_GPIO_PAR_UART_PAR_URTS1_URTS1          (0x0300)
-#define MCF_GPIO_PAR_UART_PAR_URXD1_GPIO           (0x0000)
-#define MCF_GPIO_PAR_UART_PAR_URXD1_SSI_RXD        (0x0080)
-#define MCF_GPIO_PAR_UART_PAR_URXD1_ULPI_D5        (0x0040)
-#define MCF_GPIO_PAR_UART_PAR_URXD1_URXD1          (0x00C0)
-#define MCF_GPIO_PAR_UART_PAR_UTXD1_GPIO           (0x0000)
-#define MCF_GPIO_PAR_UART_PAR_UTXD1_SSI_TXD        (0x0020)
-#define MCF_GPIO_PAR_UART_PAR_UTXD1_ULPI_D4        (0x0010)
-#define MCF_GPIO_PAR_UART_PAR_UTXD1_UTXD1          (0x0030)
-
-/* Bit definitions and macros for MCF_GPIO_PAR_QSPI */
-#define MCF_GPIO_PAR_QSPI_PAR_SCK(x)               (((x)&0x0003)<<4)
-#define MCF_GPIO_PAR_QSPI_PAR_DOUT(x)              (((x)&0x0003)<<6)
-#define MCF_GPIO_PAR_QSPI_PAR_DIN(x)               (((x)&0x0003)<<8)
-#define MCF_GPIO_PAR_QSPI_PAR_PCS0(x)              (((x)&0x0003)<<10)
-#define MCF_GPIO_PAR_QSPI_PAR_PCS1(x)              (((x)&0x0003)<<12)
-#define MCF_GPIO_PAR_QSPI_PAR_PCS2(x)              (((x)&0x0003)<<14)
-
-/* Bit definitions and macros for MCF_GPIO_PAR_TIMER */
-#define MCF_GPIO_PAR_TIMER_PAR_TIN0(x)             (((x)&0x03)<<0)
-#define MCF_GPIO_PAR_TIMER_PAR_TIN1(x)             (((x)&0x03)<<2)
-#define MCF_GPIO_PAR_TIMER_PAR_TIN2(x)             (((x)&0x03)<<4)
-#define MCF_GPIO_PAR_TIMER_PAR_TIN3(x)             (((x)&0x03)<<6)
-#define MCF_GPIO_PAR_TIMER_PAR_TIN3_GPIO           (0x00)
-#define MCF_GPIO_PAR_TIMER_PAR_TIN3_TOUT3          (0x80)
-#define MCF_GPIO_PAR_TIMER_PAR_TIN3_URXD2          (0x40)
-#define MCF_GPIO_PAR_TIMER_PAR_TIN3_TIN3           (0xC0)
-#define MCF_GPIO_PAR_TIMER_PAR_TIN2_GPIO           (0x00)
-#define MCF_GPIO_PAR_TIMER_PAR_TIN2_TOUT2          (0x20)
-#define MCF_GPIO_PAR_TIMER_PAR_TIN2_UTXD2          (0x10)
-#define MCF_GPIO_PAR_TIMER_PAR_TIN2_TIN2           (0x30)
-#define MCF_GPIO_PAR_TIMER_PAR_TIN1_GPIO           (0x00)
-#define MCF_GPIO_PAR_TIMER_PAR_TIN1_TOUT1          (0x08)
-#define MCF_GPIO_PAR_TIMER_PAR_TIN1_DACK1          (0x04)
-#define MCF_GPIO_PAR_TIMER_PAR_TIN1_TIN1           (0x0C)
-#define MCF_GPIO_PAR_TIMER_PAR_TIN0_GPIO           (0x00)
-#define MCF_GPIO_PAR_TIMER_PAR_TIN0_TOUT0          (0x02)
-#define MCF_GPIO_PAR_TIMER_PAR_TIN0_DREQ0          (0x01)
-#define MCF_GPIO_PAR_TIMER_PAR_TIN0_TIN0           (0x03)
-
-/* Bit definitions and macros for MCF_GPIO_PAR_LCDDATA */
-#define MCF_GPIO_PAR_LCDDATA_PAR_LD7_0(x)          (((x)&0x03)<<0)
-#define MCF_GPIO_PAR_LCDDATA_PAR_LD15_8(x)         (((x)&0x03)<<2)
-#define MCF_GPIO_PAR_LCDDATA_PAR_LD16(x)           (((x)&0x03)<<4)
-#define MCF_GPIO_PAR_LCDDATA_PAR_LD17(x)           (((x)&0x03)<<6)
-
-/* Bit definitions and macros for MCF_GPIO_PAR_LCDCTL */
-#define MCF_GPIO_PAR_LCDCTL_PAR_CLS                (0x0001)
-#define MCF_GPIO_PAR_LCDCTL_PAR_PS                 (0x0002)
-#define MCF_GPIO_PAR_LCDCTL_PAR_REV                (0x0004)
-#define MCF_GPIO_PAR_LCDCTL_PAR_SPL_SPR            (0x0008)
-#define MCF_GPIO_PAR_LCDCTL_PAR_CONTRAST           (0x0010)
-#define MCF_GPIO_PAR_LCDCTL_PAR_LSCLK              (0x0020)
-#define MCF_GPIO_PAR_LCDCTL_PAR_LP_HSYNC           (0x0040)
-#define MCF_GPIO_PAR_LCDCTL_PAR_FLM_VSYNC          (0x0080)
-#define MCF_GPIO_PAR_LCDCTL_PAR_ACD_OE             (0x0100)
-
-/* Bit definitions and macros for MCF_GPIO_PAR_IRQ */
-#define MCF_GPIO_PAR_IRQ_PAR_IRQ1(x)               (((x)&0x0003)<<4)
-#define MCF_GPIO_PAR_IRQ_PAR_IRQ2(x)               (((x)&0x0003)<<6)
-#define MCF_GPIO_PAR_IRQ_PAR_IRQ4(x)               (((x)&0x0003)<<8)
-#define MCF_GPIO_PAR_IRQ_PAR_IRQ5(x)               (((x)&0x0003)<<10)
-#define MCF_GPIO_PAR_IRQ_PAR_IRQ6(x)               (((x)&0x0003)<<12)
-
-/* Bit definitions and macros for MCF_GPIO_MSCR_FLEXBUS */
-#define MCF_GPIO_MSCR_FLEXBUS_MSCR_ADDRCTL(x)      (((x)&0x03)<<0)
-#define MCF_GPIO_MSCR_FLEXBUS_MSCR_DLOWER(x)       (((x)&0x03)<<2)
-#define MCF_GPIO_MSCR_FLEXBUS_MSCR_DUPPER(x)       (((x)&0x03)<<4)
-
-/* Bit definitions and macros for MCF_GPIO_MSCR_SDRAM */
-#define MCF_GPIO_MSCR_SDRAM_MSCR_SDRAM(x)          (((x)&0x03)<<0)
-#define MCF_GPIO_MSCR_SDRAM_MSCR_SDCLK(x)          (((x)&0x03)<<2)
-#define MCF_GPIO_MSCR_SDRAM_MSCR_SDCLKB(x)         (((x)&0x03)<<4)
-
-/* Bit definitions and macros for MCF_GPIO_DSCR_I2C */
-#define MCF_GPIO_DSCR_I2C_I2C_DSE(x)               (((x)&0x03)<<0)
-
-/* Bit definitions and macros for MCF_GPIO_DSCR_PWM */
-#define MCF_GPIO_DSCR_PWM_PWM_DSE(x)               (((x)&0x03)<<0)
-
-/* Bit definitions and macros for MCF_GPIO_DSCR_FEC */
-#define MCF_GPIO_DSCR_FEC_FEC_DSE(x)               (((x)&0x03)<<0)
-
-/* Bit definitions and macros for MCF_GPIO_DSCR_UART */
-#define MCF_GPIO_DSCR_UART_UART0_DSE(x)            (((x)&0x03)<<0)
-#define MCF_GPIO_DSCR_UART_UART1_DSE(x)            (((x)&0x03)<<2)
-
-/* Bit definitions and macros for MCF_GPIO_DSCR_QSPI */
-#define MCF_GPIO_DSCR_QSPI_QSPI_DSE(x)             (((x)&0x03)<<0)
-
-/* Bit definitions and macros for MCF_GPIO_DSCR_TIMER */
-#define MCF_GPIO_DSCR_TIMER_TIMER_DSE(x)           (((x)&0x03)<<0)
-
-/* Bit definitions and macros for MCF_GPIO_DSCR_SSI */
-#define MCF_GPIO_DSCR_SSI_SSI_DSE(x)               (((x)&0x03)<<0)
-
-/* Bit definitions and macros for MCF_GPIO_DSCR_LCD */
-#define MCF_GPIO_DSCR_LCD_LCD_DSE(x)               (((x)&0x03)<<0)
-
-/* Bit definitions and macros for MCF_GPIO_DSCR_DEBUG */
-#define MCF_GPIO_DSCR_DEBUG_DEBUG_DSE(x)           (((x)&0x03)<<0)
-
-/* Bit definitions and macros for MCF_GPIO_DSCR_CLKRST */
-#define MCF_GPIO_DSCR_CLKRST_CLKRST_DSE(x)         (((x)&0x03)<<0)
-
-/* Bit definitions and macros for MCF_GPIO_DSCR_IRQ */
-#define MCF_GPIO_DSCR_IRQ_IRQ_DSE(x)               (((x)&0x03)<<0)
-
-/*
- * Generic GPIO support
- */
-#define MCFGPIO_PODR			MCFGPIO_PODR_FECH
-#define MCFGPIO_PDDR			MCFGPIO_PDDR_FECH
-#define MCFGPIO_PPDR			MCFGPIO_PPDSDR_FECH
-#define MCFGPIO_SETR			MCFGPIO_PPDSDR_FECH
-#define MCFGPIO_CLRR			MCFGPIO_PCLRR_FECH
-
-#define MCFGPIO_PIN_MAX			136
-#define MCFGPIO_IRQ_MAX			8
-#define MCFGPIO_IRQ_VECBASE		MCFINT_VECBASE
-
-
-/*********************************************************************
- *
- * Interrupt Controller (INTC)
- *
- *********************************************************************/
-
-/* Register read/write macros */
-#define MCF_INTC0_IPRH             MCF_REG32(0xFC048000)
-#define MCF_INTC0_IPRL             MCF_REG32(0xFC048004)
-#define MCF_INTC0_IMRH             MCF_REG32(0xFC048008)
-#define MCF_INTC0_IMRL             MCF_REG32(0xFC04800C)
-#define MCF_INTC0_INTFRCH          MCF_REG32(0xFC048010)
-#define MCF_INTC0_INTFRCL          MCF_REG32(0xFC048014)
-#define MCF_INTC0_ICONFIG          MCF_REG16(0xFC04801A)
-#define MCF_INTC0_SIMR             MCF_REG08(0xFC04801C)
-#define MCF_INTC0_CIMR             MCF_REG08(0xFC04801D)
-#define MCF_INTC0_CLMASK           MCF_REG08(0xFC04801E)
-#define MCF_INTC0_SLMASK           MCF_REG08(0xFC04801F)
-#define MCF_INTC0_ICR0             MCF_REG08(0xFC048040)
-#define MCF_INTC0_ICR1             MCF_REG08(0xFC048041)
-#define MCF_INTC0_ICR2             MCF_REG08(0xFC048042)
-#define MCF_INTC0_ICR3             MCF_REG08(0xFC048043)
-#define MCF_INTC0_ICR4             MCF_REG08(0xFC048044)
-#define MCF_INTC0_ICR5             MCF_REG08(0xFC048045)
-#define MCF_INTC0_ICR6             MCF_REG08(0xFC048046)
-#define MCF_INTC0_ICR7             MCF_REG08(0xFC048047)
-#define MCF_INTC0_ICR8             MCF_REG08(0xFC048048)
-#define MCF_INTC0_ICR9             MCF_REG08(0xFC048049)
-#define MCF_INTC0_ICR10            MCF_REG08(0xFC04804A)
-#define MCF_INTC0_ICR11            MCF_REG08(0xFC04804B)
-#define MCF_INTC0_ICR12            MCF_REG08(0xFC04804C)
-#define MCF_INTC0_ICR13            MCF_REG08(0xFC04804D)
-#define MCF_INTC0_ICR14            MCF_REG08(0xFC04804E)
-#define MCF_INTC0_ICR15            MCF_REG08(0xFC04804F)
-#define MCF_INTC0_ICR16            MCF_REG08(0xFC048050)
-#define MCF_INTC0_ICR17            MCF_REG08(0xFC048051)
-#define MCF_INTC0_ICR18            MCF_REG08(0xFC048052)
-#define MCF_INTC0_ICR19            MCF_REG08(0xFC048053)
-#define MCF_INTC0_ICR20            MCF_REG08(0xFC048054)
-#define MCF_INTC0_ICR21            MCF_REG08(0xFC048055)
-#define MCF_INTC0_ICR22            MCF_REG08(0xFC048056)
-#define MCF_INTC0_ICR23            MCF_REG08(0xFC048057)
-#define MCF_INTC0_ICR24            MCF_REG08(0xFC048058)
-#define MCF_INTC0_ICR25            MCF_REG08(0xFC048059)
-#define MCF_INTC0_ICR26            MCF_REG08(0xFC04805A)
-#define MCF_INTC0_ICR27            MCF_REG08(0xFC04805B)
-#define MCF_INTC0_ICR28            MCF_REG08(0xFC04805C)
-#define MCF_INTC0_ICR29            MCF_REG08(0xFC04805D)
-#define MCF_INTC0_ICR30            MCF_REG08(0xFC04805E)
-#define MCF_INTC0_ICR31            MCF_REG08(0xFC04805F)
-#define MCF_INTC0_ICR32            MCF_REG08(0xFC048060)
-#define MCF_INTC0_ICR33            MCF_REG08(0xFC048061)
-#define MCF_INTC0_ICR34            MCF_REG08(0xFC048062)
-#define MCF_INTC0_ICR35            MCF_REG08(0xFC048063)
-#define MCF_INTC0_ICR36            MCF_REG08(0xFC048064)
-#define MCF_INTC0_ICR37            MCF_REG08(0xFC048065)
-#define MCF_INTC0_ICR38            MCF_REG08(0xFC048066)
-#define MCF_INTC0_ICR39            MCF_REG08(0xFC048067)
-#define MCF_INTC0_ICR40            MCF_REG08(0xFC048068)
-#define MCF_INTC0_ICR41            MCF_REG08(0xFC048069)
-#define MCF_INTC0_ICR42            MCF_REG08(0xFC04806A)
-#define MCF_INTC0_ICR43            MCF_REG08(0xFC04806B)
-#define MCF_INTC0_ICR44            MCF_REG08(0xFC04806C)
-#define MCF_INTC0_ICR45            MCF_REG08(0xFC04806D)
-#define MCF_INTC0_ICR46            MCF_REG08(0xFC04806E)
-#define MCF_INTC0_ICR47            MCF_REG08(0xFC04806F)
-#define MCF_INTC0_ICR48            MCF_REG08(0xFC048070)
-#define MCF_INTC0_ICR49            MCF_REG08(0xFC048071)
-#define MCF_INTC0_ICR50            MCF_REG08(0xFC048072)
-#define MCF_INTC0_ICR51            MCF_REG08(0xFC048073)
-#define MCF_INTC0_ICR52            MCF_REG08(0xFC048074)
-#define MCF_INTC0_ICR53            MCF_REG08(0xFC048075)
-#define MCF_INTC0_ICR54            MCF_REG08(0xFC048076)
-#define MCF_INTC0_ICR55            MCF_REG08(0xFC048077)
-#define MCF_INTC0_ICR56            MCF_REG08(0xFC048078)
-#define MCF_INTC0_ICR57            MCF_REG08(0xFC048079)
-#define MCF_INTC0_ICR58            MCF_REG08(0xFC04807A)
-#define MCF_INTC0_ICR59            MCF_REG08(0xFC04807B)
-#define MCF_INTC0_ICR60            MCF_REG08(0xFC04807C)
-#define MCF_INTC0_ICR61            MCF_REG08(0xFC04807D)
-#define MCF_INTC0_ICR62            MCF_REG08(0xFC04807E)
-#define MCF_INTC0_ICR63            MCF_REG08(0xFC04807F)
-#define MCF_INTC0_ICR(x)           MCF_REG08(0xFC048040+((x)*0x001))
-#define MCF_INTC0_SWIACK           MCF_REG08(0xFC0480E0)
-#define MCF_INTC0_L1IACK           MCF_REG08(0xFC0480E4)
-#define MCF_INTC0_L2IACK           MCF_REG08(0xFC0480E8)
-#define MCF_INTC0_L3IACK           MCF_REG08(0xFC0480EC)
-#define MCF_INTC0_L4IACK           MCF_REG08(0xFC0480F0)
-#define MCF_INTC0_L5IACK           MCF_REG08(0xFC0480F4)
-#define MCF_INTC0_L6IACK           MCF_REG08(0xFC0480F8)
-#define MCF_INTC0_L7IACK           MCF_REG08(0xFC0480FC)
-#define MCF_INTC0_LIACK(x)         MCF_REG08(0xFC0480E4+((x)*0x004))
-#define MCF_INTC1_IPRH             MCF_REG32(0xFC04C000)
-#define MCF_INTC1_IPRL             MCF_REG32(0xFC04C004)
-#define MCF_INTC1_IMRH             MCF_REG32(0xFC04C008)
-#define MCF_INTC1_IMRL             MCF_REG32(0xFC04C00C)
-#define MCF_INTC1_INTFRCH          MCF_REG32(0xFC04C010)
-#define MCF_INTC1_INTFRCL          MCF_REG32(0xFC04C014)
-#define MCF_INTC1_ICONFIG          MCF_REG16(0xFC04C01A)
-#define MCF_INTC1_SIMR             MCF_REG08(0xFC04C01C)
-#define MCF_INTC1_CIMR             MCF_REG08(0xFC04C01D)
-#define MCF_INTC1_CLMASK           MCF_REG08(0xFC04C01E)
-#define MCF_INTC1_SLMASK           MCF_REG08(0xFC04C01F)
-#define MCF_INTC1_ICR0             MCF_REG08(0xFC04C040)
-#define MCF_INTC1_ICR1             MCF_REG08(0xFC04C041)
-#define MCF_INTC1_ICR2             MCF_REG08(0xFC04C042)
-#define MCF_INTC1_ICR3             MCF_REG08(0xFC04C043)
-#define MCF_INTC1_ICR4             MCF_REG08(0xFC04C044)
-#define MCF_INTC1_ICR5             MCF_REG08(0xFC04C045)
-#define MCF_INTC1_ICR6             MCF_REG08(0xFC04C046)
-#define MCF_INTC1_ICR7             MCF_REG08(0xFC04C047)
-#define MCF_INTC1_ICR8             MCF_REG08(0xFC04C048)
-#define MCF_INTC1_ICR9             MCF_REG08(0xFC04C049)
-#define MCF_INTC1_ICR10            MCF_REG08(0xFC04C04A)
-#define MCF_INTC1_ICR11            MCF_REG08(0xFC04C04B)
-#define MCF_INTC1_ICR12            MCF_REG08(0xFC04C04C)
-#define MCF_INTC1_ICR13            MCF_REG08(0xFC04C04D)
-#define MCF_INTC1_ICR14            MCF_REG08(0xFC04C04E)
-#define MCF_INTC1_ICR15            MCF_REG08(0xFC04C04F)
-#define MCF_INTC1_ICR16            MCF_REG08(0xFC04C050)
-#define MCF_INTC1_ICR17            MCF_REG08(0xFC04C051)
-#define MCF_INTC1_ICR18            MCF_REG08(0xFC04C052)
-#define MCF_INTC1_ICR19            MCF_REG08(0xFC04C053)
-#define MCF_INTC1_ICR20            MCF_REG08(0xFC04C054)
-#define MCF_INTC1_ICR21            MCF_REG08(0xFC04C055)
-#define MCF_INTC1_ICR22            MCF_REG08(0xFC04C056)
-#define MCF_INTC1_ICR23            MCF_REG08(0xFC04C057)
-#define MCF_INTC1_ICR24            MCF_REG08(0xFC04C058)
-#define MCF_INTC1_ICR25            MCF_REG08(0xFC04C059)
-#define MCF_INTC1_ICR26            MCF_REG08(0xFC04C05A)
-#define MCF_INTC1_ICR27            MCF_REG08(0xFC04C05B)
-#define MCF_INTC1_ICR28            MCF_REG08(0xFC04C05C)
-#define MCF_INTC1_ICR29            MCF_REG08(0xFC04C05D)
-#define MCF_INTC1_ICR30            MCF_REG08(0xFC04C05E)
-#define MCF_INTC1_ICR31            MCF_REG08(0xFC04C05F)
-#define MCF_INTC1_ICR32            MCF_REG08(0xFC04C060)
-#define MCF_INTC1_ICR33            MCF_REG08(0xFC04C061)
-#define MCF_INTC1_ICR34            MCF_REG08(0xFC04C062)
-#define MCF_INTC1_ICR35            MCF_REG08(0xFC04C063)
-#define MCF_INTC1_ICR36            MCF_REG08(0xFC04C064)
-#define MCF_INTC1_ICR37            MCF_REG08(0xFC04C065)
-#define MCF_INTC1_ICR38            MCF_REG08(0xFC04C066)
-#define MCF_INTC1_ICR39            MCF_REG08(0xFC04C067)
-#define MCF_INTC1_ICR40            MCF_REG08(0xFC04C068)
-#define MCF_INTC1_ICR41            MCF_REG08(0xFC04C069)
-#define MCF_INTC1_ICR42            MCF_REG08(0xFC04C06A)
-#define MCF_INTC1_ICR43            MCF_REG08(0xFC04C06B)
-#define MCF_INTC1_ICR44            MCF_REG08(0xFC04C06C)
-#define MCF_INTC1_ICR45            MCF_REG08(0xFC04C06D)
-#define MCF_INTC1_ICR46            MCF_REG08(0xFC04C06E)
-#define MCF_INTC1_ICR47            MCF_REG08(0xFC04C06F)
-#define MCF_INTC1_ICR48            MCF_REG08(0xFC04C070)
-#define MCF_INTC1_ICR49            MCF_REG08(0xFC04C071)
-#define MCF_INTC1_ICR50            MCF_REG08(0xFC04C072)
-#define MCF_INTC1_ICR51            MCF_REG08(0xFC04C073)
-#define MCF_INTC1_ICR52            MCF_REG08(0xFC04C074)
-#define MCF_INTC1_ICR53            MCF_REG08(0xFC04C075)
-#define MCF_INTC1_ICR54            MCF_REG08(0xFC04C076)
-#define MCF_INTC1_ICR55            MCF_REG08(0xFC04C077)
-#define MCF_INTC1_ICR56            MCF_REG08(0xFC04C078)
-#define MCF_INTC1_ICR57            MCF_REG08(0xFC04C079)
-#define MCF_INTC1_ICR58            MCF_REG08(0xFC04C07A)
-#define MCF_INTC1_ICR59            MCF_REG08(0xFC04C07B)
-#define MCF_INTC1_ICR60            MCF_REG08(0xFC04C07C)
-#define MCF_INTC1_ICR61            MCF_REG08(0xFC04C07D)
-#define MCF_INTC1_ICR62            MCF_REG08(0xFC04C07E)
-#define MCF_INTC1_ICR63            MCF_REG08(0xFC04C07F)
-#define MCF_INTC1_ICR(x)           MCF_REG08(0xFC04C040+((x)*0x001))
-#define MCF_INTC1_SWIACK           MCF_REG08(0xFC04C0E0)
-#define MCF_INTC1_L1IACK           MCF_REG08(0xFC04C0E4)
-#define MCF_INTC1_L2IACK           MCF_REG08(0xFC04C0E8)
-#define MCF_INTC1_L3IACK           MCF_REG08(0xFC04C0EC)
-#define MCF_INTC1_L4IACK           MCF_REG08(0xFC04C0F0)
-#define MCF_INTC1_L5IACK           MCF_REG08(0xFC04C0F4)
-#define MCF_INTC1_L6IACK           MCF_REG08(0xFC04C0F8)
-#define MCF_INTC1_L7IACK           MCF_REG08(0xFC04C0FC)
-#define MCF_INTC1_LIACK(x)         MCF_REG08(0xFC04C0E4+((x)*0x004))
-#define MCF_INTC_IPRH(x)           MCF_REG32(0xFC048000+((x)*0x4000))
-#define MCF_INTC_IPRL(x)           MCF_REG32(0xFC048004+((x)*0x4000))
-#define MCF_INTC_IMRH(x)           MCF_REG32(0xFC048008+((x)*0x4000))
-#define MCF_INTC_IMRL(x)           MCF_REG32(0xFC04800C+((x)*0x4000))
-#define MCF_INTC_INTFRCH(x)        MCF_REG32(0xFC048010+((x)*0x4000))
-#define MCF_INTC_INTFRCL(x)        MCF_REG32(0xFC048014+((x)*0x4000))
-#define MCF_INTC_ICONFIG(x)        MCF_REG16(0xFC04801A+((x)*0x4000))
-#define MCF_INTC_SIMR(x)           MCF_REG08(0xFC04801C+((x)*0x4000))
-#define MCF_INTC_CIMR(x)           MCF_REG08(0xFC04801D+((x)*0x4000))
-#define MCF_INTC_CLMASK(x)         MCF_REG08(0xFC04801E+((x)*0x4000))
-#define MCF_INTC_SLMASK(x)         MCF_REG08(0xFC04801F+((x)*0x4000))
-#define MCF_INTC_ICR0(x)           MCF_REG08(0xFC048040+((x)*0x4000))
-#define MCF_INTC_ICR1(x)           MCF_REG08(0xFC048041+((x)*0x4000))
-#define MCF_INTC_ICR2(x)           MCF_REG08(0xFC048042+((x)*0x4000))
-#define MCF_INTC_ICR3(x)           MCF_REG08(0xFC048043+((x)*0x4000))
-#define MCF_INTC_ICR4(x)           MCF_REG08(0xFC048044+((x)*0x4000))
-#define MCF_INTC_ICR5(x)           MCF_REG08(0xFC048045+((x)*0x4000))
-#define MCF_INTC_ICR6(x)           MCF_REG08(0xFC048046+((x)*0x4000))
-#define MCF_INTC_ICR7(x)           MCF_REG08(0xFC048047+((x)*0x4000))
-#define MCF_INTC_ICR8(x)           MCF_REG08(0xFC048048+((x)*0x4000))
-#define MCF_INTC_ICR9(x)           MCF_REG08(0xFC048049+((x)*0x4000))
-#define MCF_INTC_ICR10(x)          MCF_REG08(0xFC04804A+((x)*0x4000))
-#define MCF_INTC_ICR11(x)          MCF_REG08(0xFC04804B+((x)*0x4000))
-#define MCF_INTC_ICR12(x)          MCF_REG08(0xFC04804C+((x)*0x4000))
-#define MCF_INTC_ICR13(x)          MCF_REG08(0xFC04804D+((x)*0x4000))
-#define MCF_INTC_ICR14(x)          MCF_REG08(0xFC04804E+((x)*0x4000))
-#define MCF_INTC_ICR15(x)          MCF_REG08(0xFC04804F+((x)*0x4000))
-#define MCF_INTC_ICR16(x)          MCF_REG08(0xFC048050+((x)*0x4000))
-#define MCF_INTC_ICR17(x)          MCF_REG08(0xFC048051+((x)*0x4000))
-#define MCF_INTC_ICR18(x)          MCF_REG08(0xFC048052+((x)*0x4000))
-#define MCF_INTC_ICR19(x)          MCF_REG08(0xFC048053+((x)*0x4000))
-#define MCF_INTC_ICR20(x)          MCF_REG08(0xFC048054+((x)*0x4000))
-#define MCF_INTC_ICR21(x)          MCF_REG08(0xFC048055+((x)*0x4000))
-#define MCF_INTC_ICR22(x)          MCF_REG08(0xFC048056+((x)*0x4000))
-#define MCF_INTC_ICR23(x)          MCF_REG08(0xFC048057+((x)*0x4000))
-#define MCF_INTC_ICR24(x)          MCF_REG08(0xFC048058+((x)*0x4000))
-#define MCF_INTC_ICR25(x)          MCF_REG08(0xFC048059+((x)*0x4000))
-#define MCF_INTC_ICR26(x)          MCF_REG08(0xFC04805A+((x)*0x4000))
-#define MCF_INTC_ICR27(x)          MCF_REG08(0xFC04805B+((x)*0x4000))
-#define MCF_INTC_ICR28(x)          MCF_REG08(0xFC04805C+((x)*0x4000))
-#define MCF_INTC_ICR29(x)          MCF_REG08(0xFC04805D+((x)*0x4000))
-#define MCF_INTC_ICR30(x)          MCF_REG08(0xFC04805E+((x)*0x4000))
-#define MCF_INTC_ICR31(x)          MCF_REG08(0xFC04805F+((x)*0x4000))
-#define MCF_INTC_ICR32(x)          MCF_REG08(0xFC048060+((x)*0x4000))
-#define MCF_INTC_ICR33(x)          MCF_REG08(0xFC048061+((x)*0x4000))
-#define MCF_INTC_ICR34(x)          MCF_REG08(0xFC048062+((x)*0x4000))
-#define MCF_INTC_ICR35(x)          MCF_REG08(0xFC048063+((x)*0x4000))
-#define MCF_INTC_ICR36(x)          MCF_REG08(0xFC048064+((x)*0x4000))
-#define MCF_INTC_ICR37(x)          MCF_REG08(0xFC048065+((x)*0x4000))
-#define MCF_INTC_ICR38(x)          MCF_REG08(0xFC048066+((x)*0x4000))
-#define MCF_INTC_ICR39(x)          MCF_REG08(0xFC048067+((x)*0x4000))
-#define MCF_INTC_ICR40(x)          MCF_REG08(0xFC048068+((x)*0x4000))
-#define MCF_INTC_ICR41(x)          MCF_REG08(0xFC048069+((x)*0x4000))
-#define MCF_INTC_ICR42(x)          MCF_REG08(0xFC04806A+((x)*0x4000))
-#define MCF_INTC_ICR43(x)          MCF_REG08(0xFC04806B+((x)*0x4000))
-#define MCF_INTC_ICR44(x)          MCF_REG08(0xFC04806C+((x)*0x4000))
-#define MCF_INTC_ICR45(x)          MCF_REG08(0xFC04806D+((x)*0x4000))
-#define MCF_INTC_ICR46(x)          MCF_REG08(0xFC04806E+((x)*0x4000))
-#define MCF_INTC_ICR47(x)          MCF_REG08(0xFC04806F+((x)*0x4000))
-#define MCF_INTC_ICR48(x)          MCF_REG08(0xFC048070+((x)*0x4000))
-#define MCF_INTC_ICR49(x)          MCF_REG08(0xFC048071+((x)*0x4000))
-#define MCF_INTC_ICR50(x)          MCF_REG08(0xFC048072+((x)*0x4000))
-#define MCF_INTC_ICR51(x)          MCF_REG08(0xFC048073+((x)*0x4000))
-#define MCF_INTC_ICR52(x)          MCF_REG08(0xFC048074+((x)*0x4000))
-#define MCF_INTC_ICR53(x)          MCF_REG08(0xFC048075+((x)*0x4000))
-#define MCF_INTC_ICR54(x)          MCF_REG08(0xFC048076+((x)*0x4000))
-#define MCF_INTC_ICR55(x)          MCF_REG08(0xFC048077+((x)*0x4000))
-#define MCF_INTC_ICR56(x)          MCF_REG08(0xFC048078+((x)*0x4000))
-#define MCF_INTC_ICR57(x)          MCF_REG08(0xFC048079+((x)*0x4000))
-#define MCF_INTC_ICR58(x)          MCF_REG08(0xFC04807A+((x)*0x4000))
-#define MCF_INTC_ICR59(x)          MCF_REG08(0xFC04807B+((x)*0x4000))
-#define MCF_INTC_ICR60(x)          MCF_REG08(0xFC04807C+((x)*0x4000))
-#define MCF_INTC_ICR61(x)          MCF_REG08(0xFC04807D+((x)*0x4000))
-#define MCF_INTC_ICR62(x)          MCF_REG08(0xFC04807E+((x)*0x4000))
-#define MCF_INTC_ICR63(x)          MCF_REG08(0xFC04807F+((x)*0x4000))
-#define MCF_INTC_SWIACK(x)         MCF_REG08(0xFC0480E0+((x)*0x4000))
-#define MCF_INTC_L1IACK(x)         MCF_REG08(0xFC0480E4+((x)*0x4000))
-#define MCF_INTC_L2IACK(x)         MCF_REG08(0xFC0480E8+((x)*0x4000))
-#define MCF_INTC_L3IACK(x)         MCF_REG08(0xFC0480EC+((x)*0x4000))
-#define MCF_INTC_L4IACK(x)         MCF_REG08(0xFC0480F0+((x)*0x4000))
-#define MCF_INTC_L5IACK(x)         MCF_REG08(0xFC0480F4+((x)*0x4000))
-#define MCF_INTC_L6IACK(x)         MCF_REG08(0xFC0480F8+((x)*0x4000))
-#define MCF_INTC_L7IACK(x)         MCF_REG08(0xFC0480FC+((x)*0x4000))
-
-/* Bit definitions and macros for MCF_INTC_IPRH */
-#define MCF_INTC_IPRH_INT32        (0x00000001)
-#define MCF_INTC_IPRH_INT33        (0x00000002)
-#define MCF_INTC_IPRH_INT34        (0x00000004)
-#define MCF_INTC_IPRH_INT35        (0x00000008)
-#define MCF_INTC_IPRH_INT36        (0x00000010)
-#define MCF_INTC_IPRH_INT37        (0x00000020)
-#define MCF_INTC_IPRH_INT38        (0x00000040)
-#define MCF_INTC_IPRH_INT39        (0x00000080)
-#define MCF_INTC_IPRH_INT40        (0x00000100)
-#define MCF_INTC_IPRH_INT41        (0x00000200)
-#define MCF_INTC_IPRH_INT42        (0x00000400)
-#define MCF_INTC_IPRH_INT43        (0x00000800)
-#define MCF_INTC_IPRH_INT44        (0x00001000)
-#define MCF_INTC_IPRH_INT45        (0x00002000)
-#define MCF_INTC_IPRH_INT46        (0x00004000)
-#define MCF_INTC_IPRH_INT47        (0x00008000)
-#define MCF_INTC_IPRH_INT48        (0x00010000)
-#define MCF_INTC_IPRH_INT49        (0x00020000)
-#define MCF_INTC_IPRH_INT50        (0x00040000)
-#define MCF_INTC_IPRH_INT51        (0x00080000)
-#define MCF_INTC_IPRH_INT52        (0x00100000)
-#define MCF_INTC_IPRH_INT53        (0x00200000)
-#define MCF_INTC_IPRH_INT54        (0x00400000)
-#define MCF_INTC_IPRH_INT55        (0x00800000)
-#define MCF_INTC_IPRH_INT56        (0x01000000)
-#define MCF_INTC_IPRH_INT57        (0x02000000)
-#define MCF_INTC_IPRH_INT58        (0x04000000)
-#define MCF_INTC_IPRH_INT59        (0x08000000)
-#define MCF_INTC_IPRH_INT60        (0x10000000)
-#define MCF_INTC_IPRH_INT61        (0x20000000)
-#define MCF_INTC_IPRH_INT62        (0x40000000)
-#define MCF_INTC_IPRH_INT63        (0x80000000)
-
-/* Bit definitions and macros for MCF_INTC_IPRL */
-#define MCF_INTC_IPRL_INT0         (0x00000001)
-#define MCF_INTC_IPRL_INT1         (0x00000002)
-#define MCF_INTC_IPRL_INT2         (0x00000004)
-#define MCF_INTC_IPRL_INT3         (0x00000008)
-#define MCF_INTC_IPRL_INT4         (0x00000010)
-#define MCF_INTC_IPRL_INT5         (0x00000020)
-#define MCF_INTC_IPRL_INT6         (0x00000040)
-#define MCF_INTC_IPRL_INT7         (0x00000080)
-#define MCF_INTC_IPRL_INT8         (0x00000100)
-#define MCF_INTC_IPRL_INT9         (0x00000200)
-#define MCF_INTC_IPRL_INT10        (0x00000400)
-#define MCF_INTC_IPRL_INT11        (0x00000800)
-#define MCF_INTC_IPRL_INT12        (0x00001000)
-#define MCF_INTC_IPRL_INT13        (0x00002000)
-#define MCF_INTC_IPRL_INT14        (0x00004000)
-#define MCF_INTC_IPRL_INT15        (0x00008000)
-#define MCF_INTC_IPRL_INT16        (0x00010000)
-#define MCF_INTC_IPRL_INT17        (0x00020000)
-#define MCF_INTC_IPRL_INT18        (0x00040000)
-#define MCF_INTC_IPRL_INT19        (0x00080000)
-#define MCF_INTC_IPRL_INT20        (0x00100000)
-#define MCF_INTC_IPRL_INT21        (0x00200000)
-#define MCF_INTC_IPRL_INT22        (0x00400000)
-#define MCF_INTC_IPRL_INT23        (0x00800000)
-#define MCF_INTC_IPRL_INT24        (0x01000000)
-#define MCF_INTC_IPRL_INT25        (0x02000000)
-#define MCF_INTC_IPRL_INT26        (0x04000000)
-#define MCF_INTC_IPRL_INT27        (0x08000000)
-#define MCF_INTC_IPRL_INT28        (0x10000000)
-#define MCF_INTC_IPRL_INT29        (0x20000000)
-#define MCF_INTC_IPRL_INT30        (0x40000000)
-#define MCF_INTC_IPRL_INT31        (0x80000000)
-
-/* Bit definitions and macros for MCF_INTC_IMRH */
-#define MCF_INTC_IMRH_INT_MASK32   (0x00000001)
-#define MCF_INTC_IMRH_INT_MASK33   (0x00000002)
-#define MCF_INTC_IMRH_INT_MASK34   (0x00000004)
-#define MCF_INTC_IMRH_INT_MASK35   (0x00000008)
-#define MCF_INTC_IMRH_INT_MASK36   (0x00000010)
-#define MCF_INTC_IMRH_INT_MASK37   (0x00000020)
-#define MCF_INTC_IMRH_INT_MASK38   (0x00000040)
-#define MCF_INTC_IMRH_INT_MASK39   (0x00000080)
-#define MCF_INTC_IMRH_INT_MASK40   (0x00000100)
-#define MCF_INTC_IMRH_INT_MASK41   (0x00000200)
-#define MCF_INTC_IMRH_INT_MASK42   (0x00000400)
-#define MCF_INTC_IMRH_INT_MASK43   (0x00000800)
-#define MCF_INTC_IMRH_INT_MASK44   (0x00001000)
-#define MCF_INTC_IMRH_INT_MASK45   (0x00002000)
-#define MCF_INTC_IMRH_INT_MASK46   (0x00004000)
-#define MCF_INTC_IMRH_INT_MASK47   (0x00008000)
-#define MCF_INTC_IMRH_INT_MASK48   (0x00010000)
-#define MCF_INTC_IMRH_INT_MASK49   (0x00020000)
-#define MCF_INTC_IMRH_INT_MASK50   (0x00040000)
-#define MCF_INTC_IMRH_INT_MASK51   (0x00080000)
-#define MCF_INTC_IMRH_INT_MASK52   (0x00100000)
-#define MCF_INTC_IMRH_INT_MASK53   (0x00200000)
-#define MCF_INTC_IMRH_INT_MASK54   (0x00400000)
-#define MCF_INTC_IMRH_INT_MASK55   (0x00800000)
-#define MCF_INTC_IMRH_INT_MASK56   (0x01000000)
-#define MCF_INTC_IMRH_INT_MASK57   (0x02000000)
-#define MCF_INTC_IMRH_INT_MASK58   (0x04000000)
-#define MCF_INTC_IMRH_INT_MASK59   (0x08000000)
-#define MCF_INTC_IMRH_INT_MASK60   (0x10000000)
-#define MCF_INTC_IMRH_INT_MASK61   (0x20000000)
-#define MCF_INTC_IMRH_INT_MASK62   (0x40000000)
-#define MCF_INTC_IMRH_INT_MASK63   (0x80000000)
-
-/* Bit definitions and macros for MCF_INTC_IMRL */
-#define MCF_INTC_IMRL_INT_MASK0    (0x00000001)
-#define MCF_INTC_IMRL_INT_MASK1    (0x00000002)
-#define MCF_INTC_IMRL_INT_MASK2    (0x00000004)
-#define MCF_INTC_IMRL_INT_MASK3    (0x00000008)
-#define MCF_INTC_IMRL_INT_MASK4    (0x00000010)
-#define MCF_INTC_IMRL_INT_MASK5    (0x00000020)
-#define MCF_INTC_IMRL_INT_MASK6    (0x00000040)
-#define MCF_INTC_IMRL_INT_MASK7    (0x00000080)
-#define MCF_INTC_IMRL_INT_MASK8    (0x00000100)
-#define MCF_INTC_IMRL_INT_MASK9    (0x00000200)
-#define MCF_INTC_IMRL_INT_MASK10   (0x00000400)
-#define MCF_INTC_IMRL_INT_MASK11   (0x00000800)
-#define MCF_INTC_IMRL_INT_MASK12   (0x00001000)
-#define MCF_INTC_IMRL_INT_MASK13   (0x00002000)
-#define MCF_INTC_IMRL_INT_MASK14   (0x00004000)
-#define MCF_INTC_IMRL_INT_MASK15   (0x00008000)
-#define MCF_INTC_IMRL_INT_MASK16   (0x00010000)
-#define MCF_INTC_IMRL_INT_MASK17   (0x00020000)
-#define MCF_INTC_IMRL_INT_MASK18   (0x00040000)
-#define MCF_INTC_IMRL_INT_MASK19   (0x00080000)
-#define MCF_INTC_IMRL_INT_MASK20   (0x00100000)
-#define MCF_INTC_IMRL_INT_MASK21   (0x00200000)
-#define MCF_INTC_IMRL_INT_MASK22   (0x00400000)
-#define MCF_INTC_IMRL_INT_MASK23   (0x00800000)
-#define MCF_INTC_IMRL_INT_MASK24   (0x01000000)
-#define MCF_INTC_IMRL_INT_MASK25   (0x02000000)
-#define MCF_INTC_IMRL_INT_MASK26   (0x04000000)
-#define MCF_INTC_IMRL_INT_MASK27   (0x08000000)
-#define MCF_INTC_IMRL_INT_MASK28   (0x10000000)
-#define MCF_INTC_IMRL_INT_MASK29   (0x20000000)
-#define MCF_INTC_IMRL_INT_MASK30   (0x40000000)
-#define MCF_INTC_IMRL_INT_MASK31   (0x80000000)
-
-/* Bit definitions and macros for MCF_INTC_INTFRCH */
-#define MCF_INTC_INTFRCH_INTFRC32  (0x00000001)
-#define MCF_INTC_INTFRCH_INTFRC33  (0x00000002)
-#define MCF_INTC_INTFRCH_INTFRC34  (0x00000004)
-#define MCF_INTC_INTFRCH_INTFRC35  (0x00000008)
-#define MCF_INTC_INTFRCH_INTFRC36  (0x00000010)
-#define MCF_INTC_INTFRCH_INTFRC37  (0x00000020)
-#define MCF_INTC_INTFRCH_INTFRC38  (0x00000040)
-#define MCF_INTC_INTFRCH_INTFRC39  (0x00000080)
-#define MCF_INTC_INTFRCH_INTFRC40  (0x00000100)
-#define MCF_INTC_INTFRCH_INTFRC41  (0x00000200)
-#define MCF_INTC_INTFRCH_INTFRC42  (0x00000400)
-#define MCF_INTC_INTFRCH_INTFRC43  (0x00000800)
-#define MCF_INTC_INTFRCH_INTFRC44  (0x00001000)
-#define MCF_INTC_INTFRCH_INTFRC45  (0x00002000)
-#define MCF_INTC_INTFRCH_INTFRC46  (0x00004000)
-#define MCF_INTC_INTFRCH_INTFRC47  (0x00008000)
-#define MCF_INTC_INTFRCH_INTFRC48  (0x00010000)
-#define MCF_INTC_INTFRCH_INTFRC49  (0x00020000)
-#define MCF_INTC_INTFRCH_INTFRC50  (0x00040000)
-#define MCF_INTC_INTFRCH_INTFRC51  (0x00080000)
-#define MCF_INTC_INTFRCH_INTFRC52  (0x00100000)
-#define MCF_INTC_INTFRCH_INTFRC53  (0x00200000)
-#define MCF_INTC_INTFRCH_INTFRC54  (0x00400000)
-#define MCF_INTC_INTFRCH_INTFRC55  (0x00800000)
-#define MCF_INTC_INTFRCH_INTFRC56  (0x01000000)
-#define MCF_INTC_INTFRCH_INTFRC57  (0x02000000)
-#define MCF_INTC_INTFRCH_INTFRC58  (0x04000000)
-#define MCF_INTC_INTFRCH_INTFRC59  (0x08000000)
-#define MCF_INTC_INTFRCH_INTFRC60  (0x10000000)
-#define MCF_INTC_INTFRCH_INTFRC61  (0x20000000)
-#define MCF_INTC_INTFRCH_INTFRC62  (0x40000000)
-#define MCF_INTC_INTFRCH_INTFRC63  (0x80000000)
-
-/* Bit definitions and macros for MCF_INTC_INTFRCL */
-#define MCF_INTC_INTFRCL_INTFRC0   (0x00000001)
-#define MCF_INTC_INTFRCL_INTFRC1   (0x00000002)
-#define MCF_INTC_INTFRCL_INTFRC2   (0x00000004)
-#define MCF_INTC_INTFRCL_INTFRC3   (0x00000008)
-#define MCF_INTC_INTFRCL_INTFRC4   (0x00000010)
-#define MCF_INTC_INTFRCL_INTFRC5   (0x00000020)
-#define MCF_INTC_INTFRCL_INTFRC6   (0x00000040)
-#define MCF_INTC_INTFRCL_INTFRC7   (0x00000080)
-#define MCF_INTC_INTFRCL_INTFRC8   (0x00000100)
-#define MCF_INTC_INTFRCL_INTFRC9   (0x00000200)
-#define MCF_INTC_INTFRCL_INTFRC10  (0x00000400)
-#define MCF_INTC_INTFRCL_INTFRC11  (0x00000800)
-#define MCF_INTC_INTFRCL_INTFRC12  (0x00001000)
-#define MCF_INTC_INTFRCL_INTFRC13  (0x00002000)
-#define MCF_INTC_INTFRCL_INTFRC14  (0x00004000)
-#define MCF_INTC_INTFRCL_INTFRC15  (0x00008000)
-#define MCF_INTC_INTFRCL_INTFRC16  (0x00010000)
-#define MCF_INTC_INTFRCL_INTFRC17  (0x00020000)
-#define MCF_INTC_INTFRCL_INTFRC18  (0x00040000)
-#define MCF_INTC_INTFRCL_INTFRC19  (0x00080000)
-#define MCF_INTC_INTFRCL_INTFRC20  (0x00100000)
-#define MCF_INTC_INTFRCL_INTFRC21  (0x00200000)
-#define MCF_INTC_INTFRCL_INTFRC22  (0x00400000)
-#define MCF_INTC_INTFRCL_INTFRC23  (0x00800000)
-#define MCF_INTC_INTFRCL_INTFRC24  (0x01000000)
-#define MCF_INTC_INTFRCL_INTFRC25  (0x02000000)
-#define MCF_INTC_INTFRCL_INTFRC26  (0x04000000)
-#define MCF_INTC_INTFRCL_INTFRC27  (0x08000000)
-#define MCF_INTC_INTFRCL_INTFRC28  (0x10000000)
-#define MCF_INTC_INTFRCL_INTFRC29  (0x20000000)
-#define MCF_INTC_INTFRCL_INTFRC30  (0x40000000)
-#define MCF_INTC_INTFRCL_INTFRC31  (0x80000000)
-
-/* Bit definitions and macros for MCF_INTC_ICONFIG */
-#define MCF_INTC_ICONFIG_EMASK     (0x0020)
-#define MCF_INTC_ICONFIG_ELVLPRI1  (0x0200)
-#define MCF_INTC_ICONFIG_ELVLPRI2  (0x0400)
-#define MCF_INTC_ICONFIG_ELVLPRI3  (0x0800)
-#define MCF_INTC_ICONFIG_ELVLPRI4  (0x1000)
-#define MCF_INTC_ICONFIG_ELVLPRI5  (0x2000)
-#define MCF_INTC_ICONFIG_ELVLPRI6  (0x4000)
-#define MCF_INTC_ICONFIG_ELVLPRI7  (0x8000)
-
-/* Bit definitions and macros for MCF_INTC_SIMR */
-#define MCF_INTC_SIMR_SIMR(x)      (((x)&0x7F)<<0)
-
-/* Bit definitions and macros for MCF_INTC_CIMR */
-#define MCF_INTC_CIMR_CIMR(x)      (((x)&0x7F)<<0)
-
-/* Bit definitions and macros for MCF_INTC_CLMASK */
-#define MCF_INTC_CLMASK_CLMASK(x)  (((x)&0x0F)<<0)
-
-/* Bit definitions and macros for MCF_INTC_SLMASK */
-#define MCF_INTC_SLMASK_SLMASK(x)  (((x)&0x0F)<<0)
-
-/* Bit definitions and macros for MCF_INTC_ICR */
-#define MCF_INTC_ICR_IL(x)         (((x)&0x07)<<0)
-
-/* Bit definitions and macros for MCF_INTC_SWIACK */
-#define MCF_INTC_SWIACK_VECTOR(x)  (((x)&0xFF)<<0)
-
-/* Bit definitions and macros for MCF_INTC_LIACK */
-#define MCF_INTC_LIACK_VECTOR(x)   (((x)&0xFF)<<0)
-
-/********************************************************************/
-/*********************************************************************
-*
-* LCD Controller (LCDC)
-*
-*********************************************************************/
-
-/* Register read/write macros */
-#define MCF_LCDC_LSSAR                  MCF_REG32(0xFC0AC000)
-#define MCF_LCDC_LSR                    MCF_REG32(0xFC0AC004)
-#define MCF_LCDC_LVPWR                  MCF_REG32(0xFC0AC008)
-#define MCF_LCDC_LCPR                   MCF_REG32(0xFC0AC00C)
-#define MCF_LCDC_LCWHBR                 MCF_REG32(0xFC0AC010)
-#define MCF_LCDC_LCCMR                  MCF_REG32(0xFC0AC014)
-#define MCF_LCDC_LPCR                   MCF_REG32(0xFC0AC018)
-#define MCF_LCDC_LHCR                   MCF_REG32(0xFC0AC01C)
-#define MCF_LCDC_LVCR                   MCF_REG32(0xFC0AC020)
-#define MCF_LCDC_LPOR                   MCF_REG32(0xFC0AC024)
-#define MCF_LCDC_LSCR                   MCF_REG32(0xFC0AC028)
-#define MCF_LCDC_LPCCR                  MCF_REG32(0xFC0AC02C)
-#define MCF_LCDC_LDCR                   MCF_REG32(0xFC0AC030)
-#define MCF_LCDC_LRMCR                  MCF_REG32(0xFC0AC034)
-#define MCF_LCDC_LICR                   MCF_REG32(0xFC0AC038)
-#define MCF_LCDC_LIER                   MCF_REG32(0xFC0AC03C)
-#define MCF_LCDC_LISR                   MCF_REG32(0xFC0AC040)
-#define MCF_LCDC_LGWSAR                 MCF_REG32(0xFC0AC050)
-#define MCF_LCDC_LGWSR                  MCF_REG32(0xFC0AC054)
-#define MCF_LCDC_LGWVPWR                MCF_REG32(0xFC0AC058)
-#define MCF_LCDC_LGWPOR                 MCF_REG32(0xFC0AC05C)
-#define MCF_LCDC_LGWPR                  MCF_REG32(0xFC0AC060)
-#define MCF_LCDC_LGWCR                  MCF_REG32(0xFC0AC064)
-#define MCF_LCDC_LGWDCR                 MCF_REG32(0xFC0AC068)
-#define MCF_LCDC_BPLUT_BASE             MCF_REG32(0xFC0AC800)
-#define MCF_LCDC_GWLUT_BASE             MCF_REG32(0xFC0ACC00)
-
-/* Bit definitions and macros for MCF_LCDC_LSSAR */
-#define MCF_LCDC_LSSAR_SSA(x)           (((x)&0x3FFFFFFF)<<2)
-
-/* Bit definitions and macros for MCF_LCDC_LSR */
-#define MCF_LCDC_LSR_YMAX(x)            (((x)&0x000003FF)<<0)
-#define MCF_LCDC_LSR_XMAX(x)            (((x)&0x0000003F)<<20)
-
-/* Bit definitions and macros for MCF_LCDC_LVPWR */
-#define MCF_LCDC_LVPWR_VPW(x)           (((x)&0x000003FF)<<0)
-
-/* Bit definitions and macros for MCF_LCDC_LCPR */
-#define MCF_LCDC_LCPR_CYP(x)            (((x)&0x000003FF)<<0)
-#define MCF_LCDC_LCPR_CXP(x)            (((x)&0x000003FF)<<16)
-#define MCF_LCDC_LCPR_OP                (0x10000000)
-#define MCF_LCDC_LCPR_CC(x)             (((x)&0x00000003)<<30)
-#define MCF_LCDC_LCPR_CC_TRANSPARENT    (0x00000000)
-#define MCF_LCDC_LCPR_CC_OR             (0x40000000)
-#define MCF_LCDC_LCPR_CC_XOR            (0x80000000)
-#define MCF_LCDC_LCPR_CC_AND            (0xC0000000)
-#define MCF_LCDC_LCPR_OP_ON             (0x10000000)
-#define MCF_LCDC_LCPR_OP_OFF            (0x00000000)
-
-/* Bit definitions and macros for MCF_LCDC_LCWHBR */
-#define MCF_LCDC_LCWHBR_BD(x)           (((x)&0x000000FF)<<0)
-#define MCF_LCDC_LCWHBR_CH(x)           (((x)&0x0000001F)<<16)
-#define MCF_LCDC_LCWHBR_CW(x)           (((x)&0x0000001F)<<24)
-#define MCF_LCDC_LCWHBR_BK_EN           (0x80000000)
-#define MCF_LCDC_LCWHBR_BK_EN_ON        (0x80000000)
-#define MCF_LCDC_LCWHBR_BK_EN_OFF       (0x00000000)
-
-/* Bit definitions and macros for MCF_LCDC_LCCMR */
-#define MCF_LCDC_LCCMR_CUR_COL_B(x)     (((x)&0x0000003F)<<0)
-#define MCF_LCDC_LCCMR_CUR_COL_G(x)     (((x)&0x0000003F)<<6)
-#define MCF_LCDC_LCCMR_CUR_COL_R(x)     (((x)&0x0000003F)<<12)
-
-/* Bit definitions and macros for MCF_LCDC_LPCR */
-#define MCF_LCDC_LPCR_PCD(x)            (((x)&0x0000003F)<<0)
-#define MCF_LCDC_LPCR_SHARP             (0x00000040)
-#define MCF_LCDC_LPCR_SCLKSEL           (0x00000080)
-#define MCF_LCDC_LPCR_ACD(x)            (((x)&0x0000007F)<<8)
-#define MCF_LCDC_LPCR_ACDSEL            (0x00008000)
-#define MCF_LCDC_LPCR_REV_VS            (0x00010000)
-#define MCF_LCDC_LPCR_SWAP_SEL          (0x00020000)
-#define MCF_LCDC_LPCR_ENDSEL            (0x00040000)
-#define MCF_LCDC_LPCR_SCLKIDLE          (0x00080000)
-#define MCF_LCDC_LPCR_OEPOL             (0x00100000)
-#define MCF_LCDC_LPCR_CLKPOL            (0x00200000)
-#define MCF_LCDC_LPCR_LPPOL             (0x00400000)
-#define MCF_LCDC_LPCR_FLM               (0x00800000)
-#define MCF_LCDC_LPCR_PIXPOL            (0x01000000)
-#define MCF_LCDC_LPCR_BPIX(x)           (((x)&0x00000007)<<25)
-#define MCF_LCDC_LPCR_PBSIZ(x)          (((x)&0x00000003)<<28)
-#define MCF_LCDC_LPCR_COLOR             (0x40000000)
-#define MCF_LCDC_LPCR_TFT               (0x80000000)
-#define MCF_LCDC_LPCR_MODE_MONOCGROME   (0x00000000)
-#define MCF_LCDC_LPCR_MODE_CSTN         (0x40000000)
-#define MCF_LCDC_LPCR_MODE_TFT          (0xC0000000)
-#define MCF_LCDC_LPCR_PBSIZ_1           (0x00000000)
-#define MCF_LCDC_LPCR_PBSIZ_2           (0x10000000)
-#define MCF_LCDC_LPCR_PBSIZ_4           (0x20000000)
-#define MCF_LCDC_LPCR_PBSIZ_8           (0x30000000)
-#define MCF_LCDC_LPCR_BPIX_1bpp         (0x00000000)
-#define MCF_LCDC_LPCR_BPIX_2bpp         (0x02000000)
-#define MCF_LCDC_LPCR_BPIX_4bpp         (0x04000000)
-#define MCF_LCDC_LPCR_BPIX_8bpp         (0x06000000)
-#define MCF_LCDC_LPCR_BPIX_12bpp        (0x08000000)
-#define MCF_LCDC_LPCR_BPIX_16bpp        (0x0A000000)
-#define MCF_LCDC_LPCR_BPIX_18bpp        (0x0C000000)
-
-#define MCF_LCDC_LPCR_PANEL_TYPE(x)     (((x)&0x00000003)<<30) 
-
-/* Bit definitions and macros for MCF_LCDC_LHCR */
-#define MCF_LCDC_LHCR_H_WAIT_2(x)       (((x)&0x000000FF)<<0)
-#define MCF_LCDC_LHCR_H_WAIT_1(x)       (((x)&0x000000FF)<<8)
-#define MCF_LCDC_LHCR_H_WIDTH(x)        (((x)&0x0000003F)<<26)
-
-/* Bit definitions and macros for MCF_LCDC_LVCR */
-#define MCF_LCDC_LVCR_V_WAIT_2(x)       (((x)&0x000000FF)<<0)
-#define MCF_LCDC_LVCR_V_WAIT_1(x)       (((x)&0x000000FF)<<8)
-#define MCF_LCDC_LVCR_V_WIDTH(x)      (((x)&0x0000003F)<<26)
-
-/* Bit definitions and macros for MCF_LCDC_LPOR */
-#define MCF_LCDC_LPOR_POS(x)            (((x)&0x0000001F)<<0)
-
-/* Bit definitions and macros for MCF_LCDC_LPCCR */
-#define MCF_LCDC_LPCCR_PW(x)            (((x)&0x000000FF)<<0)
-#define MCF_LCDC_LPCCR_CC_EN            (0x00000100)
-#define MCF_LCDC_LPCCR_SCR(x)           (((x)&0x00000003)<<9)
-#define MCF_LCDC_LPCCR_LDMSK            (0x00008000)
-#define MCF_LCDC_LPCCR_CLS_HI_WIDTH(x)  (((x)&0x000001FF)<<16)
-#define MCF_LCDC_LPCCR_SCR_LINEPULSE    (0x00000000)
-#define MCF_LCDC_LPCCR_SCR_PIXELCLK     (0x00002000)
-#define MCF_LCDC_LPCCR_SCR_LCDCLOCK     (0x00004000)
-
-/* Bit definitions and macros for MCF_LCDC_LDCR */
-#define MCF_LCDC_LDCR_TM(x)             (((x)&0x0000001F)<<0)
-#define MCF_LCDC_LDCR_HM(x)             (((x)&0x0000001F)<<16)
-#define MCF_LCDC_LDCR_BURST             (0x80000000)
-
-/* Bit definitions and macros for MCF_LCDC_LRMCR */
-#define MCF_LCDC_LRMCR_SEL_REF          (0x00000001)
-
-/* Bit definitions and macros for MCF_LCDC_LICR */
-#define MCF_LCDC_LICR_INTCON            (0x00000001)
-#define MCF_LCDC_LICR_INTSYN            (0x00000004)
-#define MCF_LCDC_LICR_GW_INT_CON        (0x00000010)
-
-/* Bit definitions and macros for MCF_LCDC_LIER */
-#define MCF_LCDC_LIER_BOF_EN            (0x00000001)
-#define MCF_LCDC_LIER_EOF_EN            (0x00000002)
-#define MCF_LCDC_LIER_ERR_RES_EN        (0x00000004)
-#define MCF_LCDC_LIER_UDR_ERR_EN        (0x00000008)
-#define MCF_LCDC_LIER_GW_BOF_EN         (0x00000010)
-#define MCF_LCDC_LIER_GW_EOF_EN         (0x00000020)
-#define MCF_LCDC_LIER_GW_ERR_RES_EN     (0x00000040)
-#define MCF_LCDC_LIER_GW_UDR_ERR_EN     (0x00000080)
-
-/* Bit definitions and macros for MCF_LCDC_LISR */
-#define MCF_LCDC_LISR_BOF               (0x00000001)
-#define MCF_LCDC_LISR_EOF               (0x00000002)
-#define MCF_LCDC_LISR_ERR_RES           (0x00000004)
-#define MCF_LCDC_LISR_UDR_ERR           (0x00000008)
-#define MCF_LCDC_LISR_GW_BOF            (0x00000010)
-#define MCF_LCDC_LISR_GW_EOF            (0x00000020)
-#define MCF_LCDC_LISR_GW_ERR_RES        (0x00000040)
-#define MCF_LCDC_LISR_GW_UDR_ERR        (0x00000080)
-
-/* Bit definitions and macros for MCF_LCDC_LGWSAR */
-#define MCF_LCDC_LGWSAR_GWSA(x)         (((x)&0x3FFFFFFF)<<2)
-
-/* Bit definitions and macros for MCF_LCDC_LGWSR */
-#define MCF_LCDC_LGWSR_GWH(x)           (((x)&0x000003FF)<<0)
-#define MCF_LCDC_LGWSR_GWW(x)           (((x)&0x0000003F)<<20)
-
-/* Bit definitions and macros for MCF_LCDC_LGWVPWR */
-#define MCF_LCDC_LGWVPWR_GWVPW(x)       (((x)&0x000003FF)<<0)
-
-/* Bit definitions and macros for MCF_LCDC_LGWPOR */
-#define MCF_LCDC_LGWPOR_GWPO(x)         (((x)&0x0000001F)<<0)
-
-/* Bit definitions and macros for MCF_LCDC_LGWPR */
-#define MCF_LCDC_LGWPR_GWYP(x)          (((x)&0x000003FF)<<0)
-#define MCF_LCDC_LGWPR_GWXP(x)          (((x)&0x000003FF)<<16)
-
-/* Bit definitions and macros for MCF_LCDC_LGWCR */
-#define MCF_LCDC_LGWCR_GWCKB(x)         (((x)&0x0000003F)<<0)
-#define MCF_LCDC_LGWCR_GWCKG(x)         (((x)&0x0000003F)<<6)
-#define MCF_LCDC_LGWCR_GWCKR(x)         (((x)&0x0000003F)<<12)
-#define MCF_LCDC_LGWCR_GW_RVS           (0x00200000)
-#define MCF_LCDC_LGWCR_GWE              (0x00400000)
-#define MCF_LCDC_LGWCR_GWCKE            (0x00800000)
-#define MCF_LCDC_LGWCR_GWAV(x)          (((x)&0x000000FF)<<24)
-
-/* Bit definitions and macros for MCF_LCDC_LGWDCR */
-#define MCF_LCDC_LGWDCR_GWTM(x)         (((x)&0x0000001F)<<0)
-#define MCF_LCDC_LGWDCR_GWHM(x)         (((x)&0x0000001F)<<16)
-#define MCF_LCDC_LGWDCR_GWBT            (0x80000000)
-
-/* Bit definitions and macros for MCF_LCDC_LSCR */
-#define MCF_LCDC_LSCR_PS_RISE_DELAY(x)    (((x)&0x0000003F)<<26)
-#define MCF_LCDC_LSCR_CLS_RISE_DELAY(x)   (((x)&0x000000FF)<<16)
-#define MCF_LCDC_LSCR_REV_TOGGLE_DELAY(x) (((x)&0x0000000F)<<8)
-#define MCF_LCDC_LSCR_GRAY_2(x)  		  (((x)&0x0000000F)<<4)
-#define MCF_LCDC_LSCR_GRAY_1(x)  		  (((x)&0x0000000F)<<0)
-
-/* Bit definitions and macros for MCF_LCDC_BPLUT_BASE */
-#define MCF_LCDC_BPLUT_BASE_BASE(x)     (((x)&0xFFFFFFFF)<<0)
-
-/* Bit definitions and macros for MCF_LCDC_GWLUT_BASE */
-#define MCF_LCDC_GWLUT_BASE_BASE(x)     (((x)&0xFFFFFFFF)<<0)
-
-/*********************************************************************
- *
- * Phase Locked Loop (PLL)
- *
- *********************************************************************/
-
-/* Register read/write macros */
-#define MCF_PLL_PODR              MCF_REG08(0xFC0C0000)
-#define MCF_PLL_PLLCR             MCF_REG08(0xFC0C0004)
-#define MCF_PLL_PMDR              MCF_REG08(0xFC0C0008)
-#define MCF_PLL_PFDR              MCF_REG08(0xFC0C000C)
-
-/* Bit definitions and macros for MCF_PLL_PODR */
-#define MCF_PLL_PODR_BUSDIV(x)    (((x)&0x0F)<<0)
-#define MCF_PLL_PODR_CPUDIV(x)    (((x)&0x0F)<<4)
-
-/* Bit definitions and macros for MCF_PLL_PLLCR */
-#define MCF_PLL_PLLCR_DITHDEV(x)  (((x)&0x07)<<0)
-#define MCF_PLL_PLLCR_DITHEN      (0x80)
-
-/* Bit definitions and macros for MCF_PLL_PMDR */
-#define MCF_PLL_PMDR_MODDIV(x)    (((x)&0xFF)<<0)
-
-/* Bit definitions and macros for MCF_PLL_PFDR */
-#define MCF_PLL_PFDR_MFD(x)       (((x)&0xFF)<<0)
-
-/*********************************************************************
- *
- * System Control Module Registers (SCM)
- *
- *********************************************************************/
-
-/* Register read/write macros */
-#define MCF_SCM_MPR			MCF_REG32(0xFC000000)
-#define MCF_SCM_PACRA			MCF_REG32(0xFC000020)
-#define MCF_SCM_PACRB			MCF_REG32(0xFC000024)
-#define MCF_SCM_PACRC			MCF_REG32(0xFC000028)
-#define MCF_SCM_PACRD			MCF_REG32(0xFC00002C)
-#define MCF_SCM_PACRE			MCF_REG32(0xFC000040)
-#define MCF_SCM_PACRF			MCF_REG32(0xFC000044)
-
-#define MCF_SCM_BCR			MCF_REG32(0xFC040024)
-
-/*********************************************************************
- *
- * SDRAM Controller (SDRAMC)
- *
- *********************************************************************/
-
-/* Register read/write macros */
-#define MCF_SDRAMC_SDMR			MCF_REG32(0xFC0B8000)
-#define MCF_SDRAMC_SDCR			MCF_REG32(0xFC0B8004)
-#define MCF_SDRAMC_SDCFG1		MCF_REG32(0xFC0B8008)
-#define MCF_SDRAMC_SDCFG2		MCF_REG32(0xFC0B800C)
-#define MCF_SDRAMC_LIMP_FIX		MCF_REG32(0xFC0B8080)
-#define MCF_SDRAMC_SDDS			MCF_REG32(0xFC0B8100)
-#define MCF_SDRAMC_SDCS0		MCF_REG32(0xFC0B8110)
-#define MCF_SDRAMC_SDCS1		MCF_REG32(0xFC0B8114)
-#define MCF_SDRAMC_SDCS2		MCF_REG32(0xFC0B8118)
-#define MCF_SDRAMC_SDCS3		MCF_REG32(0xFC0B811C)
-#define MCF_SDRAMC_SDCS(x)		MCF_REG32(0xFC0B8110+((x)*0x004))
-
-/* Bit definitions and macros for MCF_SDRAMC_SDMR */
-#define MCF_SDRAMC_SDMR_CMD		(0x00010000)
-#define MCF_SDRAMC_SDMR_AD(x)		(((x)&0x00000FFF)<<18)
-#define MCF_SDRAMC_SDMR_BNKAD(x)	(((x)&0x00000003)<<30)
-#define MCF_SDRAMC_SDMR_BNKAD_LMR	(0x00000000)
-#define MCF_SDRAMC_SDMR_BNKAD_LEMR	(0x40000000)
-
-/* Bit definitions and macros for MCF_SDRAMC_SDCR */
-#define MCF_SDRAMC_SDCR_IPALL		(0x00000002)
-#define MCF_SDRAMC_SDCR_IREF		(0x00000004)
-#define MCF_SDRAMC_SDCR_DQS_OE(x)	(((x)&0x0000000F)<<8)
-#define MCF_SDRAMC_SDCR_PS(x)		(((x)&0x00000003)<<12)
-#define MCF_SDRAMC_SDCR_RCNT(x)		(((x)&0x0000003F)<<16)
-#define MCF_SDRAMC_SDCR_OE_RULE		(0x00400000)
-#define MCF_SDRAMC_SDCR_MUX(x)		(((x)&0x00000003)<<24)
-#define MCF_SDRAMC_SDCR_REF		(0x10000000)
-#define MCF_SDRAMC_SDCR_DDR		(0x20000000)
-#define MCF_SDRAMC_SDCR_CKE		(0x40000000)
-#define MCF_SDRAMC_SDCR_MODE_EN		(0x80000000)
-#define MCF_SDRAMC_SDCR_PS_16		(0x00002000)
-#define MCF_SDRAMC_SDCR_PS_32		(0x00000000)
-
-/* Bit definitions and macros for MCF_SDRAMC_SDCFG1 */
-#define MCF_SDRAMC_SDCFG1_WTLAT(x)	(((x)&0x00000007)<<4)
-#define MCF_SDRAMC_SDCFG1_REF2ACT(x)	(((x)&0x0000000F)<<8)
-#define MCF_SDRAMC_SDCFG1_PRE2ACT(x)	(((x)&0x00000007)<<12)
-#define MCF_SDRAMC_SDCFG1_ACT2RW(x)	(((x)&0x00000007)<<16)
-#define MCF_SDRAMC_SDCFG1_RDLAT(x)	(((x)&0x0000000F)<<20)
-#define MCF_SDRAMC_SDCFG1_SWT2RD(x)	(((x)&0x00000007)<<24)
-#define MCF_SDRAMC_SDCFG1_SRD2RW(x)	(((x)&0x0000000F)<<28)
-
-/* Bit definitions and macros for MCF_SDRAMC_SDCFG2 */
-#define MCF_SDRAMC_SDCFG2_BL(x)		(((x)&0x0000000F)<<16)
-#define MCF_SDRAMC_SDCFG2_BRD2WT(x)	(((x)&0x0000000F)<<20)
-#define MCF_SDRAMC_SDCFG2_BWT2RW(x)	(((x)&0x0000000F)<<24)
-#define MCF_SDRAMC_SDCFG2_BRD2PRE(x)	(((x)&0x0000000F)<<28)
-
-/* Device Errata - LIMP mode work around */
-#define MCF_SDRAMC_REFRESH		(0x40000000)
-
-/* Bit definitions and macros for MCF_SDRAMC_SDDS */
-#define MCF_SDRAMC_SDDS_SB_D(x)		(((x)&0x00000003)<<0)
-#define MCF_SDRAMC_SDDS_SB_S(x)		(((x)&0x00000003)<<2)
-#define MCF_SDRAMC_SDDS_SB_A(x)		(((x)&0x00000003)<<4)
-#define MCF_SDRAMC_SDDS_SB_C(x)		(((x)&0x00000003)<<6)
-#define MCF_SDRAMC_SDDS_SB_E(x)		(((x)&0x00000003)<<8)
-
-/* Bit definitions and macros for MCF_SDRAMC_SDCS */
-#define MCF_SDRAMC_SDCS_CSSZ(x)		(((x)&0x0000001F)<<0)
-#define MCF_SDRAMC_SDCS_BASE(x)		(((x)&0x00000FFF)<<20)
-#define MCF_SDRAMC_SDCS_BA(x)		((x)&0xFFF00000)
-#define MCF_SDRAMC_SDCS_CSSZ_DIABLE	(0x00000000)
-#define MCF_SDRAMC_SDCS_CSSZ_1MBYTE	(0x00000013)
-#define MCF_SDRAMC_SDCS_CSSZ_2MBYTE	(0x00000014)
-#define MCF_SDRAMC_SDCS_CSSZ_4MBYTE	(0x00000015)
-#define MCF_SDRAMC_SDCS_CSSZ_8MBYTE	(0x00000016)
-#define MCF_SDRAMC_SDCS_CSSZ_16MBYTE	(0x00000017)
-#define MCF_SDRAMC_SDCS_CSSZ_32MBYTE	(0x00000018)
-#define MCF_SDRAMC_SDCS_CSSZ_64MBYTE	(0x00000019)
-#define MCF_SDRAMC_SDCS_CSSZ_128MBYTE	(0x0000001A)
-#define MCF_SDRAMC_SDCS_CSSZ_256MBYTE	(0x0000001B)
-#define MCF_SDRAMC_SDCS_CSSZ_512MBYTE	(0x0000001C)
-#define MCF_SDRAMC_SDCS_CSSZ_1GBYTE	(0x0000001D)
-#define MCF_SDRAMC_SDCS_CSSZ_2GBYTE	(0x0000001E)
-#define MCF_SDRAMC_SDCS_CSSZ_4GBYTE	(0x0000001F)
-
-/*********************************************************************
- *
- *      FlexCAN module registers
- *
- *********************************************************************/
-#define MCF_FLEXCAN_BASEADDR(x)		(0xFC020000+(x)*0x0800)
-#define MCF_FLEXCAN_CANMCR(x)		MCF_REG32(0xFC020000+(x)*0x0800+0x00)
-#define MCF_FLEXCAN_CANCTRL(x)		MCF_REG32(0xFC020000+(x)*0x0800+0x04)
-#define MCF_FLEXCAN_TIMER(x)		MCF_REG32(0xFC020000+(x)*0x0800+0x08)
-#define MCF_FLEXCAN_RXGMASK(x)		MCF_REG32(0xFC020000+(x)*0x0800+0x10)
-#define MCF_FLEXCAN_RX14MASK(x)		MCF_REG32(0xFC020000+(x)*0x0800+0x14)
-#define MCF_FLEXCAN_RX15MASK(x)		MCF_REG32(0xFC020000+(x)*0x0800+0x18)
-#define MCF_FLEXCAN_ERRCNT(x)		MCF_REG32(0xFC020000+(x)*0x0800+0x1C)
-#define MCF_FLEXCAN_ERRSTAT(x)		MCF_REG32(0xFC020000+(x)*0x0800+0x20)
-#define MCF_FLEXCAN_IMASK(x)		MCF_REG32(0xFC020000+(x)*0x0800+0x28)
-#define MCF_FLEXCAN_IFLAG(x)		MCF_REG32(0xFC020000+(x)*0x0800+0x30)
-
-#define MCF_FLEXCAN_MB_CNT(x,y)		MCF_REG32(0xFC020080+(x)*0x0800+(y)*0x10+0x0)
-#define MCF_FLEXCAN_MB_ID(x,y)		MCF_REG32(0xFC020080+(x)*0x0800+(y)*0x10+0x4)
-#define MCF_FLEXCAN_MB_DB(x,y,z)	MCF_REG08(0xFC020080+(x)*0x0800+(y)*0x10+0x8+(z)*0x1)
-
-/*
- *      FlexCAN Module Configuration Register
- */
-#define CANMCR_MDIS		(0x80000000)
-#define CANMCR_FRZ		(0x40000000)
-#define CANMCR_HALT		(0x10000000)
-#define CANMCR_SOFTRST		(0x02000000)
-#define CANMCR_FRZACK		(0x01000000)
-#define CANMCR_SUPV		(0x00800000)
-#define CANMCR_MAXMB(x)         ((x)&0x0F)
-
-/*
- *      FlexCAN Control Register
- */
-#define CANCTRL_PRESDIV(x)      (((x)&0xFF)<<24)
-#define CANCTRL_RJW(x)          (((x)&0x03)<<22)
-#define CANCTRL_PSEG1(x)        (((x)&0x07)<<19)
-#define CANCTRL_PSEG2(x)        (((x)&0x07)<<16)
-#define CANCTRL_BOFFMSK         (0x00008000)
-#define CANCTRL_ERRMSK	        (0x00004000)
-#define CANCTRL_CLKSRC		(0x00002000)
-#define CANCTRL_LPB	        (0x00001000)
-#define CANCTRL_SAMP	        (0x00000080)
-#define CANCTRL_BOFFREC         (0x00000040)
-#define CANCTRL_TSYNC           (0x00000020)
-#define CANCTRL_LBUF            (0x00000010)
-#define CANCTRL_LOM             (0x00000008)
-#define CANCTRL_PROPSEG(x)      ((x)&0x07)
-
-/*
- *      FlexCAN Error Counter Register
- */
-#define ERRCNT_RXECTR(x)        (((x)&0xFF)<<8)
-#define ERRCNT_TXECTR(x)        ((x)&0xFF)
-
-/*
- *      FlexCAN Error and Status Register
- */
-#define ERRSTAT_BITERR(x)       (((x)&0x03)<<14)
-#define ERRSTAT_ACKERR           (0x00002000)
-#define ERRSTAT_CRCERR           (0x00001000)
-#define ERRSTAT_FRMERR           (0x00000800)
-#define ERRSTAT_STFERR           (0x00000400)
-#define ERRSTAT_TXWRN            (0x00000200)
-#define ERRSTAT_RXWRN            (0x00000100)
-#define ERRSTAT_IDLE             (0x00000080)
-#define ERRSTAT_TXRX             (0x00000040)
-#define ERRSTAT_FLTCONF(x)       (((x)&0x03)<<4)
-#define ERRSTAT_BOFFINT          (0x00000004)
-#define ERRSTAT_ERRINT           (0x00000002)
-
-/*
- *      Interrupt Mask Register
- */
-#define IMASK_BUF15M		(0x8000)
-#define IMASK_BUF14M		(0x4000)
-#define IMASK_BUF13M		(0x2000)
-#define IMASK_BUF12M		(0x1000)
-#define IMASK_BUF11M		(0x0800)
-#define IMASK_BUF10M		(0x0400)
-#define IMASK_BUF9M		(0x0200)
-#define IMASK_BUF8M		(0x0100)
-#define IMASK_BUF7M		(0x0080)
-#define IMASK_BUF6M		(0x0040)
-#define IMASK_BUF5M		(0x0020)
-#define IMASK_BUF4M		(0x0010)
-#define IMASK_BUF3M		(0x0008)
-#define IMASK_BUF2M		(0x0004)
-#define IMASK_BUF1M		(0x0002)
-#define IMASK_BUF0M		(0x0001)
-#define IMASK_BUFnM(x)		(0x1<<(x))
-#define IMASK_BUFF_ENABLE_ALL	(0x1111)
-#define IMASK_BUFF_DISABLE_ALL	(0x0000)
-
-/*
- *      Interrupt Flag Register
- */
-#define IFLAG_BUF15M		(0x8000)
-#define IFLAG_BUF14M		(0x4000)
-#define IFLAG_BUF13M		(0x2000)
-#define IFLAG_BUF12M		(0x1000)
-#define IFLAG_BUF11M		(0x0800)
-#define IFLAG_BUF10M		(0x0400)
-#define IFLAG_BUF9M		(0x0200)
-#define IFLAG_BUF8M		(0x0100)
-#define IFLAG_BUF7M		(0x0080)
-#define IFLAG_BUF6M		(0x0040)
-#define IFLAG_BUF5M		(0x0020)
-#define IFLAG_BUF4M		(0x0010)
-#define IFLAG_BUF3M		(0x0008)
-#define IFLAG_BUF2M		(0x0004)
-#define IFLAG_BUF1M		(0x0002)
-#define IFLAG_BUF0M		(0x0001)
-#define IFLAG_BUFF_SET_ALL	(0xFFFF)
-#define IFLAG_BUFF_CLEAR_ALL	(0x0000)
-#define IFLAG_BUFnM(x)		(0x1<<(x))
-
-/*
- *      Message Buffers
- */
-#define MB_CNT_CODE(x)		(((x)&0x0F)<<24)
-#define MB_CNT_SRR		(0x00400000)
-#define MB_CNT_IDE		(0x00200000)
-#define MB_CNT_RTR		(0x00100000)
-#define MB_CNT_LENGTH(x)	(((x)&0x0F)<<16)
-#define MB_CNT_TIMESTAMP(x)	((x)&0xFFFF)
-#define MB_ID_STD(x)		(((x)&0x07FF)<<18)
-#define MB_ID_EXT(x)		((x)&0x3FFFF)
-
-/*********************************************************************
- *
- * Edge Port Module (EPORT)
- *
- *********************************************************************/
-
-/* Register read/write macros */
-#define MCFEPORT_EPPAR                (0xFC094000)
-#define MCFEPORT_EPDDR                (0xFC094002)
-#define MCFEPORT_EPIER                (0xFC094003)
-#define MCFEPORT_EPDR                 (0xFC094004)
-#define MCFEPORT_EPPDR                (0xFC094005)
-#define MCFEPORT_EPFR                 (0xFC094006)
-
-/* Bit definitions and macros for MCF_EPORT_EPPAR */
-#define MCF_EPORT_EPPAR_EPPA1(x)       (((x)&0x0003)<<2)
-#define MCF_EPORT_EPPAR_EPPA2(x)       (((x)&0x0003)<<4)
-#define MCF_EPORT_EPPAR_EPPA3(x)       (((x)&0x0003)<<6)
-#define MCF_EPORT_EPPAR_EPPA4(x)       (((x)&0x0003)<<8)
-#define MCF_EPORT_EPPAR_EPPA5(x)       (((x)&0x0003)<<10)
-#define MCF_EPORT_EPPAR_EPPA6(x)       (((x)&0x0003)<<12)
-#define MCF_EPORT_EPPAR_EPPA7(x)       (((x)&0x0003)<<14)
-#define MCF_EPORT_EPPAR_LEVEL          (0)
-#define MCF_EPORT_EPPAR_RISING         (1)
-#define MCF_EPORT_EPPAR_FALLING        (2)
-#define MCF_EPORT_EPPAR_BOTH           (3)
-#define MCF_EPORT_EPPAR_EPPA7_LEVEL    (0x0000)
-#define MCF_EPORT_EPPAR_EPPA7_RISING   (0x4000)
-#define MCF_EPORT_EPPAR_EPPA7_FALLING  (0x8000)
-#define MCF_EPORT_EPPAR_EPPA7_BOTH     (0xC000)
-#define MCF_EPORT_EPPAR_EPPA6_LEVEL    (0x0000)
-#define MCF_EPORT_EPPAR_EPPA6_RISING   (0x1000)
-#define MCF_EPORT_EPPAR_EPPA6_FALLING  (0x2000)
-#define MCF_EPORT_EPPAR_EPPA6_BOTH     (0x3000)
-#define MCF_EPORT_EPPAR_EPPA5_LEVEL    (0x0000)
-#define MCF_EPORT_EPPAR_EPPA5_RISING   (0x0400)
-#define MCF_EPORT_EPPAR_EPPA5_FALLING  (0x0800)
-#define MCF_EPORT_EPPAR_EPPA5_BOTH     (0x0C00)
-#define MCF_EPORT_EPPAR_EPPA4_LEVEL    (0x0000)
-#define MCF_EPORT_EPPAR_EPPA4_RISING   (0x0100)
-#define MCF_EPORT_EPPAR_EPPA4_FALLING  (0x0200)
-#define MCF_EPORT_EPPAR_EPPA4_BOTH     (0x0300)
-#define MCF_EPORT_EPPAR_EPPA3_LEVEL    (0x0000)
-#define MCF_EPORT_EPPAR_EPPA3_RISING   (0x0040)
-#define MCF_EPORT_EPPAR_EPPA3_FALLING  (0x0080)
-#define MCF_EPORT_EPPAR_EPPA3_BOTH     (0x00C0)
-#define MCF_EPORT_EPPAR_EPPA2_LEVEL    (0x0000)
-#define MCF_EPORT_EPPAR_EPPA2_RISING   (0x0010)
-#define MCF_EPORT_EPPAR_EPPA2_FALLING  (0x0020)
-#define MCF_EPORT_EPPAR_EPPA2_BOTH     (0x0030)
-#define MCF_EPORT_EPPAR_EPPA1_LEVEL    (0x0000)
-#define MCF_EPORT_EPPAR_EPPA1_RISING   (0x0004)
-#define MCF_EPORT_EPPAR_EPPA1_FALLING  (0x0008)
-#define MCF_EPORT_EPPAR_EPPA1_BOTH     (0x000C)
-
-/* Bit definitions and macros for MCF_EPORT_EPDDR */
-#define MCF_EPORT_EPDDR_EPDD1          (0x02)
-#define MCF_EPORT_EPDDR_EPDD2          (0x04)
-#define MCF_EPORT_EPDDR_EPDD3          (0x08)
-#define MCF_EPORT_EPDDR_EPDD4          (0x10)
-#define MCF_EPORT_EPDDR_EPDD5          (0x20)
-#define MCF_EPORT_EPDDR_EPDD6          (0x40)
-#define MCF_EPORT_EPDDR_EPDD7          (0x80)
-
-/* Bit definitions and macros for MCF_EPORT_EPIER */
-#define MCF_EPORT_EPIER_EPIE1          (0x02)
-#define MCF_EPORT_EPIER_EPIE2          (0x04)
-#define MCF_EPORT_EPIER_EPIE3          (0x08)
-#define MCF_EPORT_EPIER_EPIE4          (0x10)
-#define MCF_EPORT_EPIER_EPIE5          (0x20)
-#define MCF_EPORT_EPIER_EPIE6          (0x40)
-#define MCF_EPORT_EPIER_EPIE7          (0x80)
-
-/* Bit definitions and macros for MCF_EPORT_EPDR */
-#define MCF_EPORT_EPDR_EPD1            (0x02)
-#define MCF_EPORT_EPDR_EPD2            (0x04)
-#define MCF_EPORT_EPDR_EPD3            (0x08)
-#define MCF_EPORT_EPDR_EPD4            (0x10)
-#define MCF_EPORT_EPDR_EPD5            (0x20)
-#define MCF_EPORT_EPDR_EPD6            (0x40)
-#define MCF_EPORT_EPDR_EPD7            (0x80)
-
-/* Bit definitions and macros for MCF_EPORT_EPPDR */
-#define MCF_EPORT_EPPDR_EPPD1          (0x02)
-#define MCF_EPORT_EPPDR_EPPD2          (0x04)
-#define MCF_EPORT_EPPDR_EPPD3          (0x08)
-#define MCF_EPORT_EPPDR_EPPD4          (0x10)
-#define MCF_EPORT_EPPDR_EPPD5          (0x20)
-#define MCF_EPORT_EPPDR_EPPD6          (0x40)
-#define MCF_EPORT_EPPDR_EPPD7          (0x80)
-
-/* Bit definitions and macros for MCF_EPORT_EPFR */
-#define MCF_EPORT_EPFR_EPF1            (0x02)
-#define MCF_EPORT_EPFR_EPF2            (0x04)
-#define MCF_EPORT_EPFR_EPF3            (0x08)
-#define MCF_EPORT_EPFR_EPF4            (0x10)
-#define MCF_EPORT_EPFR_EPF5            (0x20)
-#define MCF_EPORT_EPFR_EPF6            (0x40)
-#define MCF_EPORT_EPFR_EPF7            (0x80)
-
-/********************************************************************/
-#endif	/* m532xsim_h */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/m53xxacr.h b/ANDROID_3.4.5/arch/m68k/include/asm/m53xxacr.h
deleted file mode 100644
index cd952b0a..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/m53xxacr.h
+++ /dev/null
@@ -1,101 +0,0 @@
-/****************************************************************************/
-
-/*
- * m53xxacr.h -- ColdFire version 3 core cache support
- *
- * (C) Copyright 2010, Greg Ungerer <gerg@snapgear.com>
- */
-
-/****************************************************************************/
-#ifndef m53xxacr_h
-#define m53xxacr_h
-/****************************************************************************/
-
-/*
- * All varients of the ColdFire using version 3 cores have a similar
- * cache setup. They have a unified instruction and data cache, with
- * configurable write-through or copy-back operation.
- */
-
-/*
- * Define the Cache Control register flags.
- */
-#define CACR_EC		0x80000000	/* Enable cache */
-#define CACR_ESB	0x20000000	/* Enable store buffer */
-#define CACR_DPI	0x10000000	/* Disable invalidation by CPUSHL */
-#define CACR_HLCK	0x08000000	/* Half cache lock mode */
-#define CACR_CINVA	0x01000000	/* Invalidate cache */
-#define CACR_DNFB	0x00000400	/* Inhibited fill buffer */
-#define CACR_DCM_WT	0x00000000	/* Cacheable write-through */
-#define CACR_DCM_CB	0x00000100	/* Cacheable copy-back */
-#define CACR_DCM_PRE	0x00000200	/* Cache inhibited, precise */
-#define CACR_DCM_IMPRE	0x00000300	/* Cache inhibited, imprecise */
-#define CACR_WPROTECT	0x00000020	/* Write protect*/
-#define CACR_EUSP	0x00000010	/* Eanble separate user a7 */
-
-/*
- * Define the Access Control register flags.
- */
-#define ACR_BASE_POS	24		/* Address Base (upper 8 bits) */
-#define ACR_MASK_POS	16		/* Address Mask (next 8 bits) */
-#define ACR_ENABLE	0x00008000	/* Enable this ACR */
-#define ACR_USER	0x00000000	/* Allow only user accesses */
-#define ACR_SUPER	0x00002000	/* Allow supervisor access only */
-#define ACR_ANY		0x00004000	/* Allow any access type */
-#define ACR_CM_WT	0x00000000	/* Cacheable, write-through */
-#define ACR_CM_CB	0x00000020	/* Cacheable, copy-back */
-#define ACR_CM_PRE	0x00000040	/* Cache inhibited, precise */
-#define ACR_CM_IMPRE	0x00000060	/* Cache inhibited, imprecise */
-#define ACR_WPROTECT	0x00000004	/* Write protect region */
-
-/*
- * Define the cache type and arrangement (needed for pushes).
- */
-#if defined(CONFIG_M5307)
-#define	CACHE_SIZE	0x2000		/* 8k of unified cache */
-#define	ICACHE_SIZE	CACHE_SIZE
-#define	DCACHE_SIZE	CACHE_SIZE
-#elif defined(CONFIG_M532x)
-#define	CACHE_SIZE	0x4000		/* 32k of unified cache */
-#define	ICACHE_SIZE	CACHE_SIZE
-#define	DCACHE_SIZE	CACHE_SIZE
-#endif
-
-#define	CACHE_LINE_SIZE	16		/* 16 byte line size */
-#define	CACHE_WAYS	4		/* 4 ways - set associative */
-
-/*
- * Set the cache controller settings we will use. This default in the
- * CACR is cache inhibited, we use the ACR register to set cacheing
- * enabled on the regions we want (eg RAM).
- */
-#if defined(CONFIG_CACHE_COPYBACK)
-#define CACHE_TYPE	ACR_CM_CB
-#define CACHE_PUSH
-#else
-#define CACHE_TYPE	ACR_CM_WT
-#endif
-
-#ifdef CONFIG_COLDFIRE_SW_A7
-#define CACHE_MODE	(CACR_EC + CACR_ESB + CACR_DCM_PRE)
-#else
-#define CACHE_MODE	(CACR_EC + CACR_ESB + CACR_DCM_PRE + CACR_EUSP)
-#endif
-
-/*
- * Unified cache means we will never need to flush for coherency of
- * instruction fetch. We will need to flush to maintain memory/DMA
- * coherency though in all cases. And for copyback caches we will need
- * to push cached data as well.
- */
-#define CACHE_INIT	  CACR_CINVA
-#define CACHE_INVALIDATE  CACR_CINVA
-#define CACHE_INVALIDATED CACR_CINVA
-
-#define ACR0_MODE	((CONFIG_RAMBASE & 0xff000000) + \
-			 (0x000f0000) + \
-			 (ACR_ENABLE + ACR_ANY + CACHE_TYPE))
-#define ACR1_MODE	0
-
-/****************************************************************************/
-#endif  /* m53xxsim_h */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/m5407sim.h b/ANDROID_3.4.5/arch/m68k/include/asm/m5407sim.h
deleted file mode 100644
index 79f58dd6..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/m5407sim.h
+++ /dev/null
@@ -1,146 +0,0 @@
-/****************************************************************************/
-
-/*
- *	m5407sim.h -- ColdFire 5407 System Integration Module support.
- *
- *	(C) Copyright 2000,  Lineo (www.lineo.com)
- *	(C) Copyright 1999,  Moreton Bay Ventures Pty Ltd.
- *
- *      Modified by David W. Miller for the MCF5307 Eval Board.
- */
-
-/****************************************************************************/
-#ifndef	m5407sim_h
-#define	m5407sim_h
-/****************************************************************************/
-
-#define	CPU_NAME		"COLDFIRE(m5407)"
-#define	CPU_INSTR_PER_JIFFY	3
-#define	MCF_BUSCLK		(MCF_CLK / 2)
-
-#include <asm/m54xxacr.h>
-
-/*
- *	Define the 5407 SIM register set addresses.
- */
-#define	MCFSIM_RSR		0x00		/* Reset Status reg (r/w) */
-#define	MCFSIM_SYPCR		0x01		/* System Protection reg (r/w)*/
-#define	MCFSIM_SWIVR		0x02		/* SW Watchdog intr reg (r/w) */
-#define	MCFSIM_SWSR		0x03		/* SW Watchdog service (r/w) */
-#define	MCFSIM_PAR		0x04		/* Pin Assignment reg (r/w) */
-#define	MCFSIM_IRQPAR		0x06		/* Interrupt Assignment reg (r/w) */
-#define	MCFSIM_PLLCR		0x08		/* PLL Control Reg*/
-#define	MCFSIM_MPARK		0x0C		/* BUS Master Control Reg*/
-#define	MCFSIM_IPR		0x40		/* Interrupt Pend reg (r/w) */
-#define	MCFSIM_IMR		0x44		/* Interrupt Mask reg (r/w) */
-#define	MCFSIM_AVR		0x4b		/* Autovector Ctrl reg (r/w) */
-#define	MCFSIM_ICR0		0x4c		/* Intr Ctrl reg 0 (r/w) */
-#define	MCFSIM_ICR1		0x4d		/* Intr Ctrl reg 1 (r/w) */
-#define	MCFSIM_ICR2		0x4e		/* Intr Ctrl reg 2 (r/w) */
-#define	MCFSIM_ICR3		0x4f		/* Intr Ctrl reg 3 (r/w) */
-#define	MCFSIM_ICR4		0x50		/* Intr Ctrl reg 4 (r/w) */
-#define	MCFSIM_ICR5		0x51		/* Intr Ctrl reg 5 (r/w) */
-#define	MCFSIM_ICR6		0x52		/* Intr Ctrl reg 6 (r/w) */
-#define	MCFSIM_ICR7		0x53		/* Intr Ctrl reg 7 (r/w) */
-#define	MCFSIM_ICR8		0x54		/* Intr Ctrl reg 8 (r/w) */
-#define	MCFSIM_ICR9		0x55		/* Intr Ctrl reg 9 (r/w) */
-#define	MCFSIM_ICR10		0x56		/* Intr Ctrl reg 10 (r/w) */
-#define	MCFSIM_ICR11		0x57		/* Intr Ctrl reg 11 (r/w) */
-
-#define MCFSIM_CSAR0		0x80		/* CS 0 Address 0 reg (r/w) */
-#define MCFSIM_CSMR0		0x84		/* CS 0 Mask 0 reg (r/w) */
-#define MCFSIM_CSCR0		0x8a		/* CS 0 Control reg (r/w) */
-#define MCFSIM_CSAR1		0x8c		/* CS 1 Address reg (r/w) */
-#define MCFSIM_CSMR1		0x90		/* CS 1 Mask reg (r/w) */
-#define MCFSIM_CSCR1		0x96		/* CS 1 Control reg (r/w) */
-
-#define MCFSIM_CSAR2		0x98		/* CS 2 Address reg (r/w) */
-#define MCFSIM_CSMR2		0x9c		/* CS 2 Mask reg (r/w) */
-#define MCFSIM_CSCR2		0xa2		/* CS 2 Control reg (r/w) */
-#define MCFSIM_CSAR3		0xa4		/* CS 3 Address reg (r/w) */
-#define MCFSIM_CSMR3		0xa8		/* CS 3 Mask reg (r/w) */
-#define MCFSIM_CSCR3		0xae		/* CS 3 Control reg (r/w) */
-#define MCFSIM_CSAR4		0xb0		/* CS 4 Address reg (r/w) */
-#define MCFSIM_CSMR4		0xb4		/* CS 4 Mask reg (r/w) */
-#define MCFSIM_CSCR4		0xba		/* CS 4 Control reg (r/w) */
-#define MCFSIM_CSAR5		0xbc		/* CS 5 Address reg (r/w) */
-#define MCFSIM_CSMR5		0xc0		/* CS 5 Mask reg (r/w) */
-#define MCFSIM_CSCR5		0xc6		/* CS 5 Control reg (r/w) */
-#define MCFSIM_CSAR6		0xc8		/* CS 6 Address reg (r/w) */
-#define MCFSIM_CSMR6		0xcc		/* CS 6 Mask reg (r/w) */
-#define MCFSIM_CSCR6		0xd2		/* CS 6 Control reg (r/w) */
-#define MCFSIM_CSAR7		0xd4		/* CS 7 Address reg (r/w) */
-#define MCFSIM_CSMR7		0xd8		/* CS 7 Mask reg (r/w) */
-#define MCFSIM_CSCR7		0xde		/* CS 7 Control reg (r/w) */
-
-#define MCFSIM_DCR		(MCF_MBAR + 0x100)	/* DRAM Control */
-#define MCFSIM_DACR0		(MCF_MBAR + 0x108)	/* DRAM 0 Addr/Ctrl */
-#define MCFSIM_DMR0		(MCF_MBAR + 0x10c)	/* DRAM 0 Mask */
-#define MCFSIM_DACR1		(MCF_MBAR + 0x110)	/* DRAM 1 Addr/Ctrl */
-#define MCFSIM_DMR1		(MCF_MBAR + 0x114)	/* DRAM 1 Mask */
-
-/*
- *	Timer module.
- */
-#define MCFTIMER_BASE1		(MCF_MBAR + 0x140)	/* Base of TIMER1 */
-#define MCFTIMER_BASE2		(MCF_MBAR + 0x180)	/* Base of TIMER2 */
-
-#define MCFUART_BASE0		(MCF_MBAR + 0x1c0)	/* Base address UART0 */
-#define MCFUART_BASE1		(MCF_MBAR + 0x200)	/* Base address UART1 */
-
-#define	MCFSIM_PADDR		(MCF_MBAR + 0x244)
-#define	MCFSIM_PADAT		(MCF_MBAR + 0x248)
-
-/*
- *	DMA unit base addresses.
- */
-#define MCFDMA_BASE0		(MCF_MBAR + 0x300)	/* Base address DMA 0 */
-#define MCFDMA_BASE1		(MCF_MBAR + 0x340)	/* Base address DMA 1 */
-#define MCFDMA_BASE2		(MCF_MBAR + 0x380)	/* Base address DMA 2 */
-#define MCFDMA_BASE3		(MCF_MBAR + 0x3C0)	/* Base address DMA 3 */
-
-/*
- * Generic GPIO support
- */
-#define MCFGPIO_PIN_MAX			16
-#define MCFGPIO_IRQ_MAX			-1
-#define MCFGPIO_IRQ_VECBASE		-1
-
-/*
- *	Some symbol defines for the above...
- */
-#define	MCFSIM_SWDICR		MCFSIM_ICR0	/* Watchdog timer ICR */
-#define	MCFSIM_TIMER1ICR	MCFSIM_ICR1	/* Timer 1 ICR */
-#define	MCFSIM_TIMER2ICR	MCFSIM_ICR2	/* Timer 2 ICR */
-#define	MCFSIM_UART1ICR		MCFSIM_ICR4	/* UART 1 ICR */
-#define	MCFSIM_UART2ICR		MCFSIM_ICR5	/* UART 2 ICR */
-#define	MCFSIM_DMA0ICR		MCFSIM_ICR6	/* DMA 0 ICR */
-#define	MCFSIM_DMA1ICR		MCFSIM_ICR7	/* DMA 1 ICR */
-#define	MCFSIM_DMA2ICR		MCFSIM_ICR8	/* DMA 2 ICR */
-#define	MCFSIM_DMA3ICR		MCFSIM_ICR9	/* DMA 3 ICR */
-
-/*
- *	Some symbol defines for the Parallel Port Pin Assignment Register
- */
-#define MCFSIM_PAR_DREQ0        0x40            /* Set to select DREQ0 input */
-                                                /* Clear to select par I/O */
-#define MCFSIM_PAR_DREQ1        0x20            /* Select DREQ1 input */
-                                                /* Clear to select par I/O */
-
-/*
- *       Defines for the IRQPAR Register
- */
-#define IRQ5_LEVEL4	0x80
-#define IRQ3_LEVEL6	0x40
-#define IRQ1_LEVEL2	0x20
-
-/*
- *	Define system peripheral IRQ usage.
- */
-#define	MCF_IRQ_TIMER		30		/* Timer0, Level 6 */
-#define	MCF_IRQ_PROFILER	31		/* Timer1, Level 7 */
-#define	MCF_IRQ_UART0		73		/* UART0 */
-#define	MCF_IRQ_UART1		74		/* UART1 */
-
-/****************************************************************************/
-#endif	/* m5407sim_h */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/m54xxacr.h b/ANDROID_3.4.5/arch/m68k/include/asm/m54xxacr.h
deleted file mode 100644
index 47906aaf..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/m54xxacr.h
+++ /dev/null
@@ -1,127 +0,0 @@
-/*
- * Bit definitions for the MCF54xx ACR and CACR registers.
- */
-
-#ifndef	m54xxacr_h
-#define m54xxacr_h
-
-/*
- *	Define the Cache register flags.
- */
-#define CACR_DEC	0x80000000	/* Enable data cache */
-#define CACR_DWP	0x40000000	/* Data write protection */
-#define CACR_DESB	0x20000000	/* Enable data store buffer */
-#define CACR_DDPI	0x10000000	/* Disable invalidation by CPUSHL */
-#define CACR_DHCLK	0x08000000	/* Half data cache lock mode */
-#define CACR_DDCM_WT	0x00000000	/* Write through cache*/
-#define CACR_DDCM_CP	0x02000000	/* Copyback cache */
-#define CACR_DDCM_P	0x04000000	/* No cache, precise */
-#define CACR_DDCM_IMP	0x06000000	/* No cache, imprecise */
-#define CACR_DCINVA	0x01000000	/* Invalidate data cache */
-#define CACR_BEC	0x00080000	/* Enable branch cache */
-#define CACR_BCINVA	0x00040000	/* Invalidate branch cache */
-#define CACR_IEC	0x00008000	/* Enable instruction cache */
-#define CACR_DNFB	0x00002000	/* Inhibited fill buffer */
-#define CACR_IDPI	0x00001000	/* Disable CPUSHL */
-#define CACR_IHLCK	0x00000800	/* Intruction cache half lock */
-#define CACR_IDCM	0x00000400	/* Intruction cache inhibit */
-#define CACR_ICINVA	0x00000100	/* Invalidate instr cache */
-#define CACR_EUSP	0x00000020	/* Enable separate user a7 */
-
-#define ACR_BASE_POS	24		/* Address Base */
-#define ACR_MASK_POS	16		/* Address Mask */
-#define ACR_ENABLE	0x00008000	/* Enable address */
-#define ACR_USER	0x00000000	/* User mode access only */
-#define ACR_SUPER	0x00002000	/* Supervisor mode only */
-#define ACR_ANY		0x00004000	/* Match any access mode */
-#define ACR_CM_WT	0x00000000	/* Write through mode */
-#define ACR_CM_CP	0x00000020	/* Copyback mode */
-#define ACR_CM_OFF_PRE	0x00000040	/* No cache, precise */
-#define ACR_CM_OFF_IMP	0x00000060	/* No cache, imprecise */
-#define ACR_CM		0x00000060	/* Cache mode mask */
-#define ACR_SP		0x00000008	/* Supervisor protect */
-#define ACR_WPROTECT	0x00000004	/* Write protect */
-
-#define ACR_BA(x)	((x) & 0xff000000)
-#define ACR_ADMSK(x)	((((x) - 1) & 0xff000000) >> 8)
-
-#if defined(CONFIG_M5407)
-
-#define ICACHE_SIZE 0x4000	/* instruction - 16k */
-#define DCACHE_SIZE 0x2000	/* data - 8k */
-
-#elif defined(CONFIG_M54xx)
-
-#define ICACHE_SIZE 0x8000	/* instruction - 32k */
-#define DCACHE_SIZE 0x8000	/* data - 32k */
-
-#endif
-
-#define CACHE_LINE_SIZE 0x0010	/* 16 bytes */
-#define CACHE_WAYS 4		/* 4 ways */
-
-#define ICACHE_SET_MASK	((ICACHE_SIZE / 64 - 1) << CACHE_WAYS)
-#define DCACHE_SET_MASK	((DCACHE_SIZE / 64 - 1) << CACHE_WAYS)
-#define ICACHE_MAX_ADDR	ICACHE_SET_MASK
-#define DCACHE_MAX_ADDR	DCACHE_SET_MASK
-
-/*
- *	Version 4 cores have a true harvard style separate instruction
- *	and data cache. Enable data and instruction caches, also enable write
- *	buffers and branch accelerator.
- */
-/* attention : enabling CACR_DESB requires a "nop" to flush the store buffer */
-/* use '+' instead of '|' for assembler's sake */
-
-	/* Enable data cache */
-	/* Enable data store buffer */
-	/* outside ACRs : No cache, precise */
-	/* Enable instruction+branch caches */
-#if defined(CONFIG_M5407)
-#define CACHE_MODE (CACR_DEC+CACR_DESB+CACR_DDCM_P+CACR_BEC+CACR_IEC)
-#else
-#define CACHE_MODE (CACR_DEC+CACR_DESB+CACR_DDCM_P+CACR_BEC+CACR_IEC+CACR_EUSP)
-#endif
-#define CACHE_INIT (CACR_DCINVA+CACR_BCINVA+CACR_ICINVA)
-
-#if defined(CONFIG_MMU)
-/*
- *	If running with the MMU enabled then we need to map the internal
- *	register region as non-cacheable. And then we map all our RAM as
- *	cacheable and supervisor access only.
- */
-#define ACR0_MODE	(ACR_BA(CONFIG_MBAR)+ACR_ADMSK(0x1000000)+ \
-			 ACR_ENABLE+ACR_SUPER+ACR_CM_OFF_PRE+ACR_SP)
-#define ACR1_MODE	(ACR_BA(CONFIG_RAMBASE)+ACR_ADMSK(CONFIG_RAMSIZE)+ \
-			 ACR_ENABLE+ACR_SUPER+ACR_SP)
-#define ACR2_MODE	0
-#define ACR3_MODE	(ACR_BA(CONFIG_RAMBASE)+ACR_ADMSK(CONFIG_RAMSIZE)+ \
-			 ACR_ENABLE+ACR_SUPER+ACR_SP)
-
-#else
-
-/*
- *	For the non-MMU enabled case we map all of RAM as cacheable.
- */
-#if defined(CONFIG_CACHE_COPYBACK)
-#define DATA_CACHE_MODE (ACR_ENABLE+ACR_ANY+ACR_CM_CP)
-#else
-#define DATA_CACHE_MODE (ACR_ENABLE+ACR_ANY+ACR_CM_WT)
-#endif
-#define INSN_CACHE_MODE (ACR_ENABLE+ACR_ANY)
-
-#define CACHE_INVALIDATE  (CACHE_MODE+CACR_DCINVA+CACR_BCINVA+CACR_ICINVA)
-#define CACHE_INVALIDATEI (CACHE_MODE+CACR_BCINVA+CACR_ICINVA)
-#define CACHE_INVALIDATED (CACHE_MODE+CACR_DCINVA)
-#define ACR0_MODE	(0x000f0000+DATA_CACHE_MODE)
-#define ACR1_MODE	0
-#define ACR2_MODE	(0x000f0000+INSN_CACHE_MODE)
-#define ACR3_MODE	0
-
-#if ((DATA_CACHE_MODE & ACR_CM) == ACR_CM_CP)
-/* Copyback cache mode must push dirty cache lines first */
-#define	CACHE_PUSH
-#endif
-
-#endif /* CONFIG_MMU */
-#endif	/* m54xxacr_h */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/m54xxgpt.h b/ANDROID_3.4.5/arch/m68k/include/asm/m54xxgpt.h
deleted file mode 100644
index df75dd87..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/m54xxgpt.h
+++ /dev/null
@@ -1,90 +0,0 @@
-/*
- * File:	m54xxgpt.h
- * Purpose:	Register and bit definitions for the MCF54XX
- *
- * Notes:
- *
- */
-
-#ifndef m54xxgpt_h
-#define m54xxgpt_h
-
-/*********************************************************************
-*
-* General Purpose Timers (GPT)
-*
-*********************************************************************/
-
-/* Register read/write macros */
-#define MCF_GPT_GMS0       0x000800
-#define MCF_GPT_GCIR0      0x000804
-#define MCF_GPT_GPWM0      0x000808
-#define MCF_GPT_GSR0       0x00080C
-#define MCF_GPT_GMS1       0x000810
-#define MCF_GPT_GCIR1      0x000814
-#define MCF_GPT_GPWM1      0x000818
-#define MCF_GPT_GSR1       0x00081C
-#define MCF_GPT_GMS2       0x000820
-#define MCF_GPT_GCIR2      0x000824
-#define MCF_GPT_GPWM2      0x000828
-#define MCF_GPT_GSR2       0x00082C
-#define MCF_GPT_GMS3       0x000830
-#define MCF_GPT_GCIR3      0x000834
-#define MCF_GPT_GPWM3      0x000838
-#define MCF_GPT_GSR3       0x00083C
-#define MCF_GPT_GMS(x)     (0x000800+((x)*0x010))
-#define MCF_GPT_GCIR(x)    (0x000804+((x)*0x010))
-#define MCF_GPT_GPWM(x)    (0x000808+((x)*0x010))
-#define MCF_GPT_GSR(x)     (0x00080C+((x)*0x010))
-
-/* Bit definitions and macros for MCF_GPT_GMS */
-#define MCF_GPT_GMS_TMS(x)         (((x)&0x00000007)<<0)
-#define MCF_GPT_GMS_GPIO(x)        (((x)&0x00000003)<<4)
-#define MCF_GPT_GMS_IEN            (0x00000100)
-#define MCF_GPT_GMS_OD             (0x00000200)
-#define MCF_GPT_GMS_SC             (0x00000400)
-#define MCF_GPT_GMS_CE             (0x00001000)
-#define MCF_GPT_GMS_WDEN           (0x00008000)
-#define MCF_GPT_GMS_ICT(x)         (((x)&0x00000003)<<16)
-#define MCF_GPT_GMS_OCT(x)         (((x)&0x00000003)<<20)
-#define MCF_GPT_GMS_OCPW(x)        (((x)&0x000000FF)<<24)
-#define MCF_GPT_GMS_OCT_FRCLOW     (0x00000000)
-#define MCF_GPT_GMS_OCT_PULSEHI    (0x00100000)
-#define MCF_GPT_GMS_OCT_PULSELO    (0x00200000)
-#define MCF_GPT_GMS_OCT_TOGGLE     (0x00300000)
-#define MCF_GPT_GMS_ICT_ANY        (0x00000000)
-#define MCF_GPT_GMS_ICT_RISE       (0x00010000)
-#define MCF_GPT_GMS_ICT_FALL       (0x00020000)
-#define MCF_GPT_GMS_ICT_PULSE      (0x00030000)
-#define MCF_GPT_GMS_GPIO_INPUT     (0x00000000)
-#define MCF_GPT_GMS_GPIO_OUTLO     (0x00000020)
-#define MCF_GPT_GMS_GPIO_OUTHI     (0x00000030)
-#define MCF_GPT_GMS_GPIO_MASK      (0x00000030)
-#define MCF_GPT_GMS_TMS_DISABLE    (0x00000000)
-#define MCF_GPT_GMS_TMS_INCAPT     (0x00000001)
-#define MCF_GPT_GMS_TMS_OUTCAPT    (0x00000002)
-#define MCF_GPT_GMS_TMS_PWM        (0x00000003)
-#define MCF_GPT_GMS_TMS_GPIO       (0x00000004)
-#define MCF_GPT_GMS_TMS_MASK       (0x00000007)
-
-/* Bit definitions and macros for MCF_GPT_GCIR */
-#define MCF_GPT_GCIR_CNT(x)        (((x)&0x0000FFFF)<<0)
-#define MCF_GPT_GCIR_PRE(x)        (((x)&0x0000FFFF)<<16)
-
-/* Bit definitions and macros for MCF_GPT_GPWM */
-#define MCF_GPT_GPWM_LOAD          (0x00000001)
-#define MCF_GPT_GPWM_PWMOP         (0x00000100)
-#define MCF_GPT_GPWM_WIDTH(x)      (((x)&0x0000FFFF)<<16)
-
-/* Bit definitions and macros for MCF_GPT_GSR */
-#define MCF_GPT_GSR_CAPT           (0x00000001)
-#define MCF_GPT_GSR_COMP           (0x00000002)
-#define MCF_GPT_GSR_PWMP           (0x00000004)
-#define MCF_GPT_GSR_TEXP           (0x00000008)
-#define MCF_GPT_GSR_PIN            (0x00000100)
-#define MCF_GPT_GSR_OVF(x)         (((x)&0x00000007)<<12)
-#define MCF_GPT_GSR_CAPTURE(x)     (((x)&0x0000FFFF)<<16)
-
-/********************************************************************/
-
-#endif /* m54xxgpt_h */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/m54xxsim.h b/ANDROID_3.4.5/arch/m68k/include/asm/m54xxsim.h
deleted file mode 100644
index ae56b884..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/m54xxsim.h
+++ /dev/null
@@ -1,84 +0,0 @@
-/*
- *	m54xxsim.h -- ColdFire 547x/548x System Integration Unit support.
- */
-
-#ifndef	m54xxsim_h
-#define m54xxsim_h
-
-#define	CPU_NAME		"COLDFIRE(m54xx)"
-#define	CPU_INSTR_PER_JIFFY	2
-#define	MCF_BUSCLK		(MCF_CLK / 2)
-
-#include <asm/m54xxacr.h>
-
-#define MCFINT_VECBASE		64
-
-/*
- *      Interrupt Controller Registers
- */
-#define MCFICM_INTC0		(MCF_MBAR + 0x700) 	/* Base for Interrupt Ctrl 0 */
-
-#define MCFINTC_IPRH		0x00		/* Interrupt pending 32-63 */
-#define MCFINTC_IPRL		0x04		/* Interrupt pending 1-31 */
-#define MCFINTC_IMRH		0x08		/* Interrupt mask 32-63 */
-#define MCFINTC_IMRL		0x0c		/* Interrupt mask 1-31 */
-#define MCFINTC_INTFRCH		0x10		/* Interrupt force 32-63 */
-#define MCFINTC_INTFRCL		0x14		/* Interrupt force 1-31 */
-#define MCFINTC_IRLR		0x18		/* */
-#define MCFINTC_IACKL		0x19		/* */
-#define MCFINTC_ICR0		0x40		/* Base ICR register */
-
-/*
- *	UART module.
- */
-#define MCFUART_BASE0		(MCF_MBAR + 0x8600)	/* Base address UART0 */
-#define MCFUART_BASE1		(MCF_MBAR + 0x8700)	/* Base address UART1 */
-#define MCFUART_BASE2		(MCF_MBAR + 0x8800)	/* Base address UART2 */
-#define MCFUART_BASE3		(MCF_MBAR + 0x8900)	/* Base address UART3 */
-
-/*
- *	Define system peripheral IRQ usage.
- */
-#define MCF_IRQ_TIMER		(MCFINT_VECBASE + 54)	/* Slice Timer 0 */
-#define MCF_IRQ_PROFILER	(MCFINT_VECBASE + 53)	/* Slice Timer 1 */
-#define MCF_IRQ_UART0		(MCFINT_VECBASE + 35)
-#define MCF_IRQ_UART1		(MCFINT_VECBASE + 34)
-#define MCF_IRQ_UART2		(MCFINT_VECBASE + 33)
-#define MCF_IRQ_UART3		(MCFINT_VECBASE + 32)
-
-/*
- *	Generic GPIO support
- */
-#define MCFGPIO_PIN_MAX		0	/* I am too lazy to count */
-#define MCFGPIO_IRQ_MAX		-1
-#define MCFGPIO_IRQ_VECBASE	-1
-
-/*
- *	EDGE Port support.
- */
-#define	MCFEPORT_EPPAR		(MCF_MBAR + 0xf00)	/* Pin assignment */
-#define	MCFEPORT_EPDDR		(MCF_MBAR + 0xf04)	/* Data direction */
-#define	MCFEPORT_EPIER		(MCF_MBAR + 0xf05)	/* Interrupt enable */
-#define	MCFEPORT_EPDR		(MCF_MBAR + 0xf08)	/* Port data (w) */
-#define	MCFEPORT_EPPDR		(MCF_MBAR + 0xf09)	/* Port data (r) */
-#define	MCFEPORT_EPFR		(MCF_MBAR + 0xf0c)	/* Flags */
-
-/*
- *	Some PSC related definitions
- */
-#define MCF_PAR_PSC(x)		(0x000A4F-((x)&0x3))
-#define MCF_PAR_SDA		(0x0008)
-#define MCF_PAR_SCL		(0x0004)
-#define MCF_PAR_PSC_TXD		(0x04)
-#define MCF_PAR_PSC_RXD		(0x08)
-#define MCF_PAR_PSC_RTS(x)	(((x)&0x03)<<4)
-#define MCF_PAR_PSC_CTS(x)	(((x)&0x03)<<6)
-#define MCF_PAR_PSC_CTS_GPIO	(0x00)
-#define MCF_PAR_PSC_CTS_BCLK	(0x80)
-#define MCF_PAR_PSC_CTS_CTS	(0xC0)
-#define MCF_PAR_PSC_RTS_GPIO    (0x00)
-#define MCF_PAR_PSC_RTS_FSYNC	(0x20)
-#define MCF_PAR_PSC_RTS_RTS	(0x30)
-#define MCF_PAR_PSC_CANRX	(0x40)
-
-#endif	/* m54xxsim_h */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/m68360.h b/ANDROID_3.4.5/arch/m68k/include/asm/m68360.h
deleted file mode 100644
index eb7d39ef..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/m68360.h
+++ /dev/null
@@ -1,13 +0,0 @@
-#include "m68360_regs.h"
-#include "m68360_pram.h"
-#include "m68360_quicc.h"
-#include "m68360_enet.h"
-
-#ifdef CONFIG_M68360
-
-#define CPM_INTERRUPT    4
-
-/* see MC68360 User's Manual, p. 7-377  */
-#define CPM_VECTOR_BASE  0x04           /* 3 MSbits of CPM vector */
-
-#endif /* CONFIG_M68360 */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/m68360_enet.h b/ANDROID_3.4.5/arch/m68k/include/asm/m68360_enet.h
deleted file mode 100644
index c36f4d05..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/m68360_enet.h
+++ /dev/null
@@ -1,177 +0,0 @@
-/***********************************
- * $Id: m68360_enet.h,v 1.1 2002/03/02 15:01:07 gerg Exp $
- ***********************************
- *
- ***************************************
- * Definitions for the ETHERNET controllers
- ***************************************
- */
-
-#ifndef __ETHER_H
-#define __ETHER_H
-
-#include "quicc_simple.h"
-
-/*
- * transmit BD's
- */
-#define T_R     0x8000          /* ready bit */
-#define E_T_PAD 0x4000          /* short frame padding */
-#define T_W     0x2000          /* wrap bit */
-#define T_I     0x1000          /* interrupt on completion */
-#define T_L     0x0800          /* last in frame */
-#define T_TC    0x0400          /* transmit CRC (when last) */
-
-#define T_DEF   0x0200          /* defer indication */
-#define T_HB    0x0100          /* heartbeat */
-#define T_LC    0x0080          /* error: late collision */
-#define T_RL    0x0040          /* error: retransmission limit */
-#define T_RC    0x003c          /* retry count */
-#define T_UN    0x0002          /* error: underrun */
-#define T_CSL   0x0001          /* carier sense lost */
-#define T_ERROR (T_HB | T_LC | T_RL | T_UN | T_CSL)
-
-/*
- * receive BD's
- */
-#define R_E     0x8000          /* buffer empty */
-#define R_W     0x2000          /* wrap bit */
-#define R_I     0x1000          /* interrupt on reception */
-#define R_L     0x0800          /* last BD in frame */
-#define R_F     0x0400          /* first BD in frame */
-#define R_M     0x0100          /* received because of promisc. mode */
-
-#define R_LG    0x0020          /* frame too long */
-#define R_NO    0x0010          /* non-octet aligned */
-#define R_SH    0x0008          /* short frame */
-#define R_CR    0x0004          /* receive CRC error */
-#define R_OV    0x0002          /* receive overrun */
-#define R_CL    0x0001          /* collision */
-#define ETHER_R_ERROR (R_LG | R_NO | R_SH | R_CR | R_OV | R_CL)
-
-
-/*
- * ethernet interrupts
- */
-#define ETHERNET_GRA    0x0080  /* graceful stop complete */
-#define ETHERNET_TXE    0x0010  /* transmit error         */
-#define ETHERNET_RXF    0x0008  /* receive frame          */
-#define ETHERNET_BSY    0x0004  /* busy condition         */
-#define ETHERNET_TXB    0x0002  /* transmit buffer        */
-#define ETHERNET_RXB    0x0001  /* receive buffer         */
-
-/*
- * ethernet protocol specific mode register (PSMR)
- */
-#define ETHER_HBC       0x8000    /* heartbeat checking      */
-#define ETHER_FC        0x4000    /* force collision         */
-#define ETHER_RSH       0x2000    /* receive short frames    */
-#define ETHER_IAM       0x1000    /* individual address mode */
-#define ETHER_CRC_32    (0x2<<10) /* Enable CRC              */
-#define ETHER_PRO       0x0200    /* promiscuous             */
-#define ETHER_BRO       0x0100    /* broadcast address       */
-#define ETHER_SBT       0x0080    /* stop backoff timer      */
-#define ETHER_LPB       0x0040    /* Loop Back Mode          */
-#define ETHER_SIP       0x0020    /* sample input pins       */
-#define ETHER_LCW       0x0010    /* late collision window   */
-#define ETHER_NIB_13    (0x0<<1)  /* # of ignored bits 13    */
-#define ETHER_NIB_14    (0x1<<1)  /* # of ignored bits 14    */
-#define ETHER_NIB_15    (0x2<<1)  /* # of ignored bits 15    */
-#define ETHER_NIB_16    (0x3<<1)  /* # of ignored bits 16    */
-#define ETHER_NIB_21    (0x4<<1)  /* # of ignored bits 21    */
-#define ETHER_NIB_22    (0x5<<1)  /* # of ignored bits 22    */
-#define ETHER_NIB_23    (0x6<<1)  /* # of ignored bits 23    */
-#define ETHER_NIB_24    (0x7<<1)  /* # of ignored bits 24    */
-
-/*
- * ethernet specific parameters
- */
-#define CRC_WORD 4          /* Length in bytes of CRC */               
-#define C_PRES   0xffffffff /* preform 32 bit CRC */
-#define C_MASK   0xdebb20e3 /* comply with 32 bit CRC */       
-#define CRCEC    0x00000000
-#define ALEC     0x00000000
-#define DISFC    0x00000000
-#define PADS     0x00000000
-#define RET_LIM  0x000f     /* retry 15 times to send a frame before interrupt */
-#define ETH_MFLR 0x05ee     /* 1518 max frame size */
-#define MINFLR   0x0040     /* Minimum frame size 64 */
-#define MAXD1    0x05ee     /* Max dma count 1518 */
-#define MAXD2    0x05ee
-#define GADDR1   0x00000000 /* Clear group address */  
-#define GADDR2   0x00000000
-#define GADDR3   0x00000000    
-#define GADDR4   0x00000000    
-#define P_PER    0x00000000 /*not used */              
-#define IADDR1   0x00000000 /* Individual hash table not used */       
-#define IADDR2   0x00000000
-#define IADDR3   0x00000000    
-#define IADDR4   0x00000000            
-#define TADDR_H  0x00000000 /* clear this regs */              
-#define TADDR_M  0x00000000            
-#define TADDR_L  0x00000000            
-
-/*       SCC Parameter Ram */
-#define RFCR    0x18 /* normal operation */
-#define TFCR    0x18 /* normal operation */
-#define E_MRBLR 1518 /* Max ethernet frame length */
-
-/*
- * ethernet specific structure
- */
-typedef union {
-        unsigned char b[6];
-        struct {
-            unsigned short high;
-            unsigned short middl;
-            unsigned short low;
-        } w;
-} ETHER_ADDR;
-
-typedef struct {
-    int        max_frame_length;
-    int        promisc_mode;
-    int        reject_broadcast;
-    ETHER_ADDR phys_adr;
-} ETHER_SPECIFIC;
-
-typedef struct {
-    ETHER_ADDR     dst_addr;
-    ETHER_ADDR     src_addr;
-    unsigned short type_or_len;
-    unsigned char  data[1];
-} ETHER_FRAME;
-
-#define MAX_DATALEN 1500
-typedef struct {
-    ETHER_ADDR     dst_addr;
-    ETHER_ADDR     src_addr;
-    unsigned short type_or_len;
-    unsigned char  data[MAX_DATALEN];
-    unsigned char  fcs[CRC_WORD];
-} ETHER_MAX_FRAME;
-
-
-/*
- * Internal ethernet function prototypes
- */
-void        ether_interrupt(int scc_num);
-/* mleslie: debug */
-/* static void ethernet_rx_internal(int scc_num); */
-/* static void ethernet_tx_internal(int scc_num); */
-
-/*
- * User callable routines prototypes (ethernet specific)
- */
-void ethernet_init(int                       scc_number,
-                   alloc_routine             *alloc_buffer,
-                   free_routine              *free_buffer,
-                   store_rx_buffer_routine   *store_rx_buffer,
-                   handle_tx_error_routine   *handle_tx_error,
-                   handle_rx_error_routine   *handle_rx_error,
-                   handle_lost_error_routine *handle_lost_error,
-                   ETHER_SPECIFIC            *ether_spec);
-int  ethernet_tx(int scc_number, void *buf, int length);
-
-#endif
-
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/m68360_pram.h b/ANDROID_3.4.5/arch/m68k/include/asm/m68360_pram.h
deleted file mode 100644
index e6088bbc..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/m68360_pram.h
+++ /dev/null
@@ -1,431 +0,0 @@
-/***********************************
- * $Id: m68360_pram.h,v 1.1 2002/03/02 15:01:07 gerg Exp $
- ***********************************
- *
- ***************************************
- * Definitions of the parameter area RAM.
- * Note that different structures are overlaid
- * at the same offsets for the different modes
- * of operation.
- ***************************************
- */
-
-#ifndef __PRAM_H
-#define __PRAM_H
-
-/* Time slot assignment table */
-#define VALID_SLOT	0x8000
-#define WRAP_SLOT	0x4000
-
-/*****************************************************************
-        Global Multichannel parameter RAM
-*****************************************************************/
-struct global_multi_pram {
-    /*
-     * Global Multichannel parameter RAM
-     */
-    unsigned long   mcbase;		/* Multichannel Base pointer */
-    unsigned short  qmcstate;		/* Multichannel Controller state */
-    unsigned short  mrblr;		/* Maximum Receive Buffer Length */
-    unsigned short  tx_s_ptr;		/* TSTATx Pointer */
-    unsigned short  rxptr;		/* Current Time slot entry in TSATRx */
-    unsigned short  grfthr;		/* Global Receive frame threshold */
-    unsigned short  grfcnt;		/* Global Receive Frame Count */
-    unsigned long   intbase;		/* Multichannel Base address */
-    unsigned long   iintptr;		/* Pointer to interrupt queue */
-    unsigned short  rx_s_ptr;		/* TSTARx Pointer */
-
-    unsigned short  txptr;		/* Current Time slot entry in TSATTx */
-    unsigned long   c_mask32;		/* CRC Constant (debb20e3) */
-    unsigned short  tsatrx[32];		/* Time Slot Assignment Table Rx */
-    unsigned short  tsattx[32];		/* Time Slot Assignment Table Tx */
-    unsigned short  c_mask16;		/* CRC Constant (f0b8) */
-};
-
-/*****************************************************************
-        Quicc32 HDLC parameter RAM
-*****************************************************************/
-struct quicc32_pram {
-
-    unsigned short  tbase;		/* Tx Buffer Descriptors Base Address */
-    unsigned short  chamr;		/* Channel Mode Register */
-    unsigned long   tstate;		/* Tx Internal State */
-    unsigned long   txintr;		/* Tx Internal Data Pointer */
-    unsigned short  tbptr;		/* Tx Buffer Descriptor Pointer */
-    unsigned short  txcntr;		/* Tx Internal Byte Count */
-    unsigned long   tupack;		/* (Tx Temp) */
-    unsigned long   zistate;		/* Zero Insertion machine state */
-    unsigned long   tcrc;		/* Temp Transmit CRC */
-    unsigned short  intmask;		/* Channel's interrupt mask flags */
-    unsigned short  bdflags;		
-    unsigned short  rbase;		/* Rx Buffer Descriptors Base Address */
-    unsigned short  mflr;		/* Max Frame Length Register */
-    unsigned long   rstate;		/* Rx Internal State */
-    unsigned long   rxintr;		/* Rx Internal Data Pointer */
-    unsigned short  rbptr;		/* Rx Buffer Descriptor Pointer */
-    unsigned short  rxbyc;		/* Rx Internal Byte Count */
-    unsigned long   rpack;		/* (Rx Temp) */
-    unsigned long   zdstate;		/* Zero Deletion machine state */
-    unsigned long   rcrc;		/* Temp Transmit CRC */
-    unsigned short  maxc;		/* Max_length counter */
-    unsigned short  tmp_mb;		/* Temp */
-};
-
-
-/*****************************************************************
-        HDLC parameter RAM
-*****************************************************************/
-
-struct hdlc_pram {
-    /*
-     * SCC parameter RAM
-     */
-    unsigned short  rbase;          /* RX BD base address */
-    unsigned short  tbase;          /* TX BD base address */
-    unsigned char   rfcr;           /* Rx function code */
-    unsigned char   tfcr;           /* Tx function code */
-    unsigned short  mrblr;          /* Rx buffer length */
-    unsigned long   rstate;         /* Rx internal state */
-    unsigned long   rptr;           /* Rx internal data pointer */
-    unsigned short  rbptr;          /* rb BD Pointer */
-    unsigned short  rcount;         /* Rx internal byte count */
-    unsigned long   rtemp;          /* Rx temp */
-    unsigned long   tstate;         /* Tx internal state */
-    unsigned long   tptr;           /* Tx internal data pointer */
-    unsigned short  tbptr;          /* Tx BD pointer */
-    unsigned short  tcount;         /* Tx byte count */
-    unsigned long   ttemp;          /* Tx temp */
-    unsigned long   rcrc;           /* temp receive CRC */
-    unsigned long   tcrc;           /* temp transmit CRC */
-   
-    /*
-     * HDLC specific parameter RAM
-     */
-    unsigned char   RESERVED1[4];   /* Reserved area */
-    unsigned long   c_mask;         /* CRC constant */
-    unsigned long   c_pres;         /* CRC preset */
-    unsigned short  disfc;          /* discarded frame counter */
-    unsigned short  crcec;          /* CRC error counter */
-    unsigned short  abtsc;          /* abort sequence counter */
-    unsigned short  nmarc;          /* nonmatching address rx cnt */
-    unsigned short  retrc;          /* frame retransmission cnt */
-    unsigned short  mflr;           /* maximum frame length reg */
-    unsigned short  max_cnt;        /* maximum length counter */
-    unsigned short  rfthr;          /* received frames threshold */
-    unsigned short  rfcnt;          /* received frames count */
-    unsigned short  hmask;          /* user defined frm addr mask */
-    unsigned short  haddr1;         /* user defined frm address 1 */
-    unsigned short  haddr2;         /* user defined frm address 2 */
-    unsigned short  haddr3;         /* user defined frm address 3 */
-    unsigned short  haddr4;         /* user defined frm address 4 */
-    unsigned short  tmp;            /* temp */
-    unsigned short  tmp_mb;         /* temp */
-};
-
-
-
-/*****************************************************************
-        UART parameter RAM
-*****************************************************************/
-
-/*
- * bits in uart control characters table
- */
-#define CC_INVALID  0x8000          /* control character is valid */
-#define CC_REJ      0x4000          /* don't store char in buffer */
-#define CC_CHAR     0x00ff          /* control character */
-
-/* UART */
-struct uart_pram {
-    /*
-     * SCC parameter RAM
-     */
-    unsigned short  rbase;          /* RX BD base address */
-    unsigned short  tbase;          /* TX BD base address */
-    unsigned char   rfcr;           /* Rx function code */
-    unsigned char   tfcr;           /* Tx function code */
-    unsigned short  mrblr;          /* Rx buffer length */
-    unsigned long   rstate;         /* Rx internal state */
-    unsigned long   rptr;           /* Rx internal data pointer */
-    unsigned short  rbptr;          /* rb BD Pointer */
-    unsigned short  rcount;         /* Rx internal byte count */
-    unsigned long   rx_temp;        /* Rx temp */
-    unsigned long   tstate;         /* Tx internal state */
-    unsigned long   tptr;           /* Tx internal data pointer */
-    unsigned short  tbptr;          /* Tx BD pointer */
-    unsigned short  tcount;         /* Tx byte count */
-    unsigned long   ttemp;          /* Tx temp */
-    unsigned long   rcrc;           /* temp receive CRC */
-    unsigned long   tcrc;           /* temp transmit CRC */
-   
-    /*
-     * UART specific parameter RAM
-     */
-    unsigned char   RESERVED1[8];   /* Reserved area */
-    unsigned short  max_idl;        /* maximum idle characters */
-    unsigned short  idlc;           /* rx idle counter (internal) */
-    unsigned short  brkcr;          /* break count register */
-                   
-    unsigned short  parec;          /* Rx parity error counter */
-    unsigned short  frmer;          /* Rx framing error counter */
-    unsigned short  nosec;          /* Rx noise counter */
-    unsigned short  brkec;          /* Rx break character counter */
-    unsigned short  brkln;          /* Reaceive break length */
-                   
-    unsigned short  uaddr1;         /* address character 1 */
-    unsigned short  uaddr2;         /* address character 2 */
-    unsigned short  rtemp;          /* temp storage */
-    unsigned short  toseq;          /* Tx out of sequence char */
-    unsigned short  cc[8];          /* Rx control characters */
-    unsigned short  rccm;           /* Rx control char mask */
-    unsigned short  rccr;           /* Rx control char register */
-    unsigned short  rlbc;           /* Receive last break char */
-};
-
-
-
-/*****************************************************************
-        BISYNC parameter RAM
-*****************************************************************/
-
-struct bisync_pram {
-    /*
-     * SCC parameter RAM
-     */
-    unsigned short  rbase;          /* RX BD base address */
-    unsigned short  tbase;          /* TX BD base address */
-    unsigned char   rfcr;           /* Rx function code */
-    unsigned char   tfcr;           /* Tx function code */
-    unsigned short  mrblr;          /* Rx buffer length */
-    unsigned long   rstate;         /* Rx internal state */
-    unsigned long   rptr;           /* Rx internal data pointer */
-    unsigned short  rbptr;          /* rb BD Pointer */
-    unsigned short  rcount;         /* Rx internal byte count */
-    unsigned long   rtemp;          /* Rx temp */
-    unsigned long   tstate;         /* Tx internal state */
-    unsigned long   tptr;           /* Tx internal data pointer */
-    unsigned short  tbptr;          /* Tx BD pointer */
-    unsigned short  tcount;         /* Tx byte count */
-    unsigned long   ttemp;          /* Tx temp */
-    unsigned long   rcrc;           /* temp receive CRC */
-    unsigned long   tcrc;           /* temp transmit CRC */
-   
-    /*
-     * BISYNC specific parameter RAM
-     */
-    unsigned char   RESERVED1[4];   /* Reserved area */
-    unsigned long   crcc;           /* CRC Constant Temp Value */
-    unsigned short  prcrc;          /* Preset Receiver CRC-16/LRC */
-    unsigned short  ptcrc;          /* Preset Transmitter CRC-16/LRC */
-    unsigned short  parec;          /* Receive Parity Error Counter */
-    unsigned short  bsync;          /* BISYNC SYNC Character */
-    unsigned short  bdle;           /* BISYNC DLE Character */
-    unsigned short  cc[8];          /* Rx control characters */
-    unsigned short  rccm;           /* Receive Control Character Mask */
-};
-
-/*****************************************************************
-        IOM2 parameter RAM
-        (overlaid on tx bd[5] of SCC channel[2])
-*****************************************************************/
-struct iom2_pram {
-    unsigned short  ci_data;        /* ci data */
-    unsigned short  monitor_data;   /* monitor data */
-    unsigned short  tstate;         /* transmitter state */
-    unsigned short  rstate;         /* receiver state */
-};
-
-/*****************************************************************
-        SPI/SMC parameter RAM
-        (overlaid on tx bd[6,7] of SCC channel[2])
-*****************************************************************/
-
-#define SPI_R       0x8000          /* Ready bit in BD */
-
-struct spi_pram {
-    unsigned short  rbase;          /* Rx BD Base Address */
-    unsigned short  tbase;          /* Tx BD Base Address */
-    unsigned char   rfcr;           /* Rx function code */
-    unsigned char   tfcr;           /* Tx function code */
-    unsigned short  mrblr;          /* Rx buffer length */
-    unsigned long   rstate;         /* Rx internal state */
-    unsigned long   rptr;           /* Rx internal data pointer */
-    unsigned short  rbptr;          /* rb BD Pointer */
-    unsigned short  rcount;         /* Rx internal byte count */
-    unsigned long   rtemp;          /* Rx temp */
-    unsigned long   tstate;         /* Tx internal state */
-    unsigned long   tptr;           /* Tx internal data pointer */
-    unsigned short  tbptr;          /* Tx BD pointer */
-    unsigned short  tcount;         /* Tx byte count */
-    unsigned long   ttemp;          /* Tx temp */
-};
-
-struct smc_uart_pram {
-    unsigned short  rbase;          /* Rx BD Base Address */
-    unsigned short  tbase;          /* Tx BD Base Address */
-    unsigned char   rfcr;           /* Rx function code */
-    unsigned char   tfcr;           /* Tx function code */
-    unsigned short  mrblr;          /* Rx buffer length */
-    unsigned long   rstate;         /* Rx internal state */
-    unsigned long   rptr;           /* Rx internal data pointer */
-    unsigned short  rbptr;          /* rb BD Pointer */
-    unsigned short  rcount;         /* Rx internal byte count */
-    unsigned long   rtemp;          /* Rx temp */
-    unsigned long   tstate;         /* Tx internal state */
-    unsigned long   tptr;           /* Tx internal data pointer */
-    unsigned short  tbptr;          /* Tx BD pointer */
-    unsigned short  tcount;         /* Tx byte count */
-    unsigned long   ttemp;          /* Tx temp */
-    unsigned short  max_idl;        /* Maximum IDLE Characters */
-    unsigned short  idlc;           /* Temporary IDLE Counter */
-    unsigned short  brkln;          /* Last Rx Break Length */
-    unsigned short  brkec;          /* Rx Break Condition Counter */
-    unsigned short  brkcr;          /* Break Count Register (Tx) */
-    unsigned short  r_mask;         /* Temporary bit mask */
-};
-
-struct smc_trnsp_pram {
-    unsigned short  rbase;          /* rx BD Base Address */
-    unsigned short  tbase;          /* Tx BD Base Address */
-    unsigned char   rfcr;           /* Rx function code */
-    unsigned char   tfcr;           /* Tx function code */
-    unsigned short  mrblr;          /* Rx buffer length */
-    unsigned long   rstate;         /* Rx internal state */
-    unsigned long   rptr;           /* Rx internal data pointer */
-    unsigned short  rbptr;          /* rb BD Pointer */
-    unsigned short  rcount;         /* Rx internal byte count */
-    unsigned long   rtemp;          /* Rx temp */
-    unsigned long   tstate;         /* Tx internal state */
-    unsigned long   tptr;           /* Tx internal data pointer */
-    unsigned short  tbptr;          /* Tx BD pointer */
-    unsigned short  tcount;         /* Tx byte count */
-    unsigned long   ttemp;          /* Tx temp */
-    unsigned short  reserved[5];    /* Reserved */
-};
-
-struct idma_pram {
-    unsigned short  ibase;          /* IDMA BD Base Address */
-    unsigned short  ibptr;          /* IDMA buffer descriptor pointer */
-    unsigned long   istate;         /* IDMA internal state */
-    unsigned long   itemp;          /* IDMA temp */
-};
-
-struct ethernet_pram {
-    /*
-     * SCC parameter RAM
-     */
-    unsigned short  rbase;          /* RX BD base address */
-    unsigned short  tbase;          /* TX BD base address */
-    unsigned char   rfcr;           /* Rx function code */
-    unsigned char   tfcr;           /* Tx function code */
-    unsigned short  mrblr;          /* Rx buffer length */
-    unsigned long   rstate;         /* Rx internal state */
-    unsigned long   rptr;           /* Rx internal data pointer */
-    unsigned short  rbptr;          /* rb BD Pointer */
-    unsigned short  rcount;         /* Rx internal byte count */
-    unsigned long   rtemp;          /* Rx temp */
-    unsigned long   tstate;         /* Tx internal state */
-    unsigned long   tptr;           /* Tx internal data pointer */
-    unsigned short  tbptr;          /* Tx BD pointer */
-    unsigned short  tcount;         /* Tx byte count */
-    unsigned long   ttemp;          /* Tx temp */
-    unsigned long   rcrc;           /* temp receive CRC */
-    unsigned long   tcrc;           /* temp transmit CRC */
-   
-    /*
-     * ETHERNET specific parameter RAM
-     */
-    unsigned long   c_pres;         /* preset CRC */
-    unsigned long   c_mask;         /* constant mask for CRC */
-    unsigned long   crcec;          /* CRC error counter */
-    unsigned long   alec;           /* alighnment error counter */
-    unsigned long   disfc;          /* discard frame counter */
-    unsigned short  pads;           /* short frame PAD characters */
-    unsigned short  ret_lim;        /* retry limit threshold */
-    unsigned short  ret_cnt;        /* retry limit counter */
-    unsigned short  mflr;           /* maximum frame length reg */
-    unsigned short  minflr;         /* minimum frame length reg */
-    unsigned short  maxd1;          /* maximum DMA1 length reg */
-    unsigned short  maxd2;          /* maximum DMA2 length reg */
-    unsigned short  maxd;           /* rx max DMA */
-    unsigned short  dma_cnt;        /* rx dma counter */
-    unsigned short  max_b;          /* max bd byte count */
-    unsigned short  gaddr1;         /* group address filter 1 */
-    unsigned short  gaddr2;         /* group address filter 2 */
-    unsigned short  gaddr3;         /* group address filter 3 */
-    unsigned short  gaddr4;         /* group address filter 4 */
-    unsigned long   tbuf0_data0;    /* save area 0 - current frm */
-    unsigned long   tbuf0_data1;    /* save area 1 - current frm */
-    unsigned long   tbuf0_rba0;
-    unsigned long   tbuf0_crc;
-    unsigned short  tbuf0_bcnt;
-    union {
-        unsigned char b[6];
-        struct {
-            unsigned short high;
-            unsigned short middl;
-            unsigned short low;
-        } w;
-    } paddr;
-    unsigned short  p_per;          /* persistence */
-    unsigned short  rfbd_ptr;       /* rx first bd pointer */
-    unsigned short  tfbd_ptr;       /* tx first bd pointer */
-    unsigned short  tlbd_ptr;       /* tx last bd pointer */
-    unsigned long   tbuf1_data0;    /* save area 0 - next frame */
-    unsigned long   tbuf1_data1;    /* save area 1 - next frame */
-    unsigned long   tbuf1_rba0;
-    unsigned long   tbuf1_crc;
-    unsigned short  tbuf1_bcnt;
-    unsigned short  tx_len;         /* tx frame length counter */
-    unsigned short  iaddr1;         /* individual address filter 1*/
-    unsigned short  iaddr2;         /* individual address filter 2*/
-    unsigned short  iaddr3;         /* individual address filter 3*/
-    unsigned short  iaddr4;         /* individual address filter 4*/
-    unsigned short  boff_cnt;       /* back-off counter */
-    unsigned short  taddr_h;        /* temp address (MSB) */
-    unsigned short  taddr_m;        /* temp address */
-    unsigned short  taddr_l;        /* temp address (LSB) */
-};
-
-struct transparent_pram {
-    /*
-     * SCC parameter RAM
-     */
-    unsigned short  rbase;          /* RX BD base address */
-    unsigned short  tbase;          /* TX BD base address */
-    unsigned char   rfcr;           /* Rx function code */
-    unsigned char   tfcr;           /* Tx function code */
-    unsigned short  mrblr;          /* Rx buffer length */
-    unsigned long   rstate;         /* Rx internal state */
-    unsigned long   rptr;           /* Rx internal data pointer */
-    unsigned short  rbptr;          /* rb BD Pointer */
-    unsigned short  rcount;         /* Rx internal byte count */
-    unsigned long   rtemp;          /* Rx temp */
-    unsigned long   tstate;         /* Tx internal state */
-    unsigned long   tptr;           /* Tx internal data pointer */
-    unsigned short  tbptr;          /* Tx BD pointer */
-    unsigned short  tcount;         /* Tx byte count */
-    unsigned long   ttemp;          /* Tx temp */
-    unsigned long   rcrc;           /* temp receive CRC */
-    unsigned long   tcrc;           /* temp transmit CRC */
-   
-    /*
-     * TRANSPARENT specific parameter RAM
-     */
-    unsigned long   crc_p;          /* CRC Preset */
-    unsigned long   crc_c;          /* CRC constant */
-};
-
-struct timer_pram {
-    /*
-     * RISC timers parameter RAM
-     */
-    unsigned short  tm_base;        /* RISC timer table base adr */
-    unsigned short  tm_ptr;         /* RISC timer table pointer */
-    unsigned short  r_tmr;          /* RISC timer mode register */
-    unsigned short  r_tmv;          /* RISC timer valid register */
-    unsigned long   tm_cmd;         /* RISC timer cmd register */
-    unsigned long   tm_cnt;         /* RISC timer internal cnt */
-};
-
-#endif
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/m68360_quicc.h b/ANDROID_3.4.5/arch/m68k/include/asm/m68360_quicc.h
deleted file mode 100644
index 59414cc1..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/m68360_quicc.h
+++ /dev/null
@@ -1,362 +0,0 @@
-/***********************************
- * $Id: m68360_quicc.h,v 1.1 2002/03/02 15:01:07 gerg Exp $
- ***********************************
- *
- ***************************************
- * Definitions of QUICC memory structures
- ***************************************
- */
-
-#ifndef __M68360_QUICC_H
-#define __M68360_QUICC_H
-
-/*
- * include registers and
- * parameter ram definitions files
- */
-#include <asm/m68360_regs.h>
-#include <asm/m68360_pram.h>
-
-
-
-/* Buffer Descriptors */
-typedef struct quicc_bd {
-    volatile unsigned short     status;
-    volatile unsigned short     length;
-    volatile unsigned char      *buf;     /* WARNING: This is only true if *char is 32 bits */
-} QUICC_BD;
-
-
-#ifdef MOTOROLA_ORIGINAL
-struct user_data {
-    /* BASE + 0x000: user data memory */
-    volatile unsigned char      udata_bd_ucode[0x400]; /*user data bd's Ucode*/
-    volatile unsigned char      udata_bd[0x200];       /*user data Ucode     */
-    volatile unsigned char      ucode_ext[0x100];      /*Ucode Extension ram */
-    volatile unsigned char      RESERVED1[0x500];      /* Reserved area      */
-};
-#else
-struct user_data {
-    /* BASE + 0x000: user data memory */
-    volatile unsigned char      udata_bd_ucode[0x400]; /* user data, bds, Ucode*/
-    volatile unsigned char      udata_bd1[0x200];       /* user, bds */
-    volatile unsigned char      ucode_bd_scratch[0x100]; /* user, bds, ucode scratch */
-    volatile unsigned char      udata_bd2[0x100];       /* user, bds */
-    volatile unsigned char      RESERVED1[0x400];      /* Reserved area      */
-};
-#endif
-
-
-/*
- * internal ram
- */
-typedef struct quicc {
-	union {
-		struct quicc32_pram ch_pram_tbl[32];	/* 32*64(bytes) per channel */	
-		struct user_data		u;
-	}ch_or_u;	/* multipul or user space */
-
-    /* BASE + 0xc00: PARAMETER RAM */
-	union {
-		struct scc_pram {
-			union {
-				struct hdlc_pram        h;
-				struct uart_pram        u;
-				struct bisync_pram      b;
-				struct transparent_pram t;
-				unsigned char   RESERVED66[0x70];
-			} pscc;               /* scc parameter area (protocol dependent) */
-			union {
-				struct {
-					unsigned char       RESERVED70[0x10];
-					struct spi_pram     spi;
-					unsigned char       RESERVED72[0x8];
-					struct timer_pram   timer;
-				} timer_spi;
-				struct {
-					struct idma_pram idma;
-					unsigned char       RESERVED67[0x4];
-					union {
-						struct smc_uart_pram u;
-						struct smc_trnsp_pram t;
-					} psmc;
-				} idma_smc;
-			} pothers;
-		} scc;
-		struct ethernet_pram    enet_scc;
-		struct global_multi_pram        m;
-		unsigned char   pr[0x100];
-	} pram[4];
-
-    /* reserved */
-
-    /* BASE + 0x1000: INTERNAL REGISTERS */
-    /* SIM */
-    volatile unsigned long      sim_mcr;        /* module configuration reg */
-    volatile unsigned short     sim_simtr;      /* module test register     */
-    volatile unsigned char      RESERVED2[0x2]; /* Reserved area            */
-    volatile unsigned char      sim_avr;        /* auto vector reg          */
-    volatile unsigned char      sim_rsr;        /* reset status reg         */
-    volatile unsigned char      RESERVED3[0x2]; /* Reserved area            */
-    volatile unsigned char      sim_clkocr;     /* CLCO control register    */
-    volatile unsigned char      RESERVED62[0x3];        /* Reserved area    */
-    volatile unsigned short     sim_pllcr;      /* PLL control register     */
-    volatile unsigned char      RESERVED63[0x2];        /* Reserved area    */
-    volatile unsigned short     sim_cdvcr;      /* Clock devider control register */
-    volatile unsigned short     sim_pepar;      /* Port E pin assignment register */
-    volatile unsigned char      RESERVED64[0xa];        /* Reserved area    */
-    volatile unsigned char      sim_sypcr;      /* system protection control*/
-    volatile unsigned char      sim_swiv;       /* software interrupt vector*/
-    volatile unsigned char      RESERVED6[0x2]; /* Reserved area            */
-    volatile unsigned short     sim_picr;       /* periodic interrupt control reg */
-    volatile unsigned char      RESERVED7[0x2]; /* Reserved area            */
-    volatile unsigned short     sim_pitr;       /* periodic interrupt timing reg */
-    volatile unsigned char      RESERVED8[0x3]; /* Reserved area            */
-    volatile unsigned char      sim_swsr;       /* software service         */
-    volatile unsigned long      sim_bkar;       /* breakpoint address register*/
-    volatile unsigned long      sim_bkcr;       /* breakpoint control register*/
-    volatile unsigned char      RESERVED10[0x8];        /* Reserved area    */
-    /* MEMC */
-    volatile unsigned long      memc_gmr;       /* Global memory register   */
-    volatile unsigned short     memc_mstat;     /* MEMC status register     */
-    volatile unsigned char      RESERVED11[0xa];        /* Reserved area    */
-    volatile unsigned long      memc_br0;       /* base register 0          */
-    volatile unsigned long      memc_or0;       /* option register 0        */
-    volatile unsigned char      RESERVED12[0x8];        /* Reserved area    */
-    volatile unsigned long      memc_br1;       /* base register 1          */
-    volatile unsigned long      memc_or1;       /* option register 1        */
-    volatile unsigned char      RESERVED13[0x8];        /* Reserved area    */
-    volatile unsigned long      memc_br2;       /* base register 2          */
-    volatile unsigned long      memc_or2;       /* option register 2        */
-    volatile unsigned char      RESERVED14[0x8];        /* Reserved area    */
-    volatile unsigned long      memc_br3;       /* base register 3          */
-    volatile unsigned long      memc_or3;       /* option register 3        */
-    volatile unsigned char      RESERVED15[0x8];        /* Reserved area    */
-    volatile unsigned long      memc_br4;       /* base register 3          */
-    volatile unsigned long      memc_or4;       /* option register 3        */
-    volatile unsigned char      RESERVED16[0x8];        /* Reserved area    */
-    volatile unsigned long      memc_br5;       /* base register 3          */
-    volatile unsigned long      memc_or5;       /* option register 3        */
-    volatile unsigned char      RESERVED17[0x8];        /* Reserved area    */
-    volatile unsigned long      memc_br6;       /* base register 3          */
-    volatile unsigned long      memc_or6;       /* option register 3        */
-    volatile unsigned char      RESERVED18[0x8];        /* Reserved area    */
-    volatile unsigned long      memc_br7;       /* base register 3          */
-    volatile unsigned long      memc_or7;       /* option register 3        */
-    volatile unsigned char      RESERVED9[0x28];        /* Reserved area    */
-    /* TEST */
-    volatile unsigned short     test_tstmra;    /* master shift a           */
-    volatile unsigned short     test_tstmrb;    /* master shift b           */
-    volatile unsigned short     test_tstsc;     /* shift count              */
-    volatile unsigned short     test_tstrc;     /* repetition counter       */
-    volatile unsigned short     test_creg;      /* control                  */
-    volatile unsigned short     test_dreg;      /* destributed register     */
-    volatile unsigned char      RESERVED58[0x404];      /* Reserved area    */
-    /* IDMA1 */
-    volatile unsigned short     idma_iccr;      /* channel configuration reg*/
-    volatile unsigned char      RESERVED19[0x2];        /* Reserved area    */
-    volatile unsigned short     idma1_cmr;      /* dma mode reg             */
-    volatile unsigned char      RESERVED68[0x2];        /* Reserved area    */
-    volatile unsigned long      idma1_sapr;     /* dma source addr ptr      */
-    volatile unsigned long      idma1_dapr;     /* dma destination addr ptr */
-    volatile unsigned long      idma1_bcr;      /* dma byte count reg       */
-    volatile unsigned char      idma1_fcr;      /* function code reg        */
-    volatile unsigned char      RESERVED20;     /* Reserved area            */
-    volatile unsigned char      idma1_cmar;     /* channel mask reg         */
-    volatile unsigned char      RESERVED21;     /* Reserved area            */
-    volatile unsigned char      idma1_csr;      /* channel status reg       */
-    volatile unsigned char      RESERVED22[0x3];        /* Reserved area    */
-    /* SDMA */
-    volatile unsigned char      sdma_sdsr;      /* status reg               */
-    volatile unsigned char      RESERVED23;     /* Reserved area            */
-    volatile unsigned short     sdma_sdcr;      /* configuration reg        */
-    volatile unsigned long      sdma_sdar;      /* address reg              */
-    /* IDMA2 */
-    volatile unsigned char      RESERVED69[0x2];        /* Reserved area    */
-    volatile unsigned short     idma2_cmr;      /* dma mode reg             */
-    volatile unsigned long      idma2_sapr;     /* dma source addr ptr      */
-    volatile unsigned long      idma2_dapr;     /* dma destination addr ptr */
-    volatile unsigned long      idma2_bcr;      /* dma byte count reg       */
-    volatile unsigned char      idma2_fcr;      /* function code reg        */
-    volatile unsigned char      RESERVED24;     /* Reserved area            */
-    volatile unsigned char      idma2_cmar;     /* channel mask reg         */
-    volatile unsigned char      RESERVED25;     /* Reserved area            */
-    volatile unsigned char      idma2_csr;      /* channel status reg       */
-    volatile unsigned char      RESERVED26[0x7];        /* Reserved area    */
-    /* Interrupt Controller */
-    volatile unsigned long      intr_cicr;      /* CP interrupt configuration reg*/
-    volatile unsigned long      intr_cipr;      /* CP interrupt pending reg */
-    volatile unsigned long      intr_cimr;      /* CP interrupt mask reg    */
-    volatile unsigned long      intr_cisr;      /* CP interrupt in service reg*/
-    /* Parallel I/O */
-    volatile unsigned short     pio_padir;      /* port A data direction reg */
-    volatile unsigned short     pio_papar;      /* port A pin assignment reg */
-    volatile unsigned short     pio_paodr;      /* port A open drain reg    */
-    volatile unsigned short     pio_padat;      /* port A data register     */
-    volatile unsigned char      RESERVED28[0x8];        /* Reserved area    */
-    volatile unsigned short     pio_pcdir;      /* port C data direction reg*/
-    volatile unsigned short     pio_pcpar;      /* port C pin assignment reg*/
-    volatile unsigned short     pio_pcso;       /* port C special options   */
-    volatile unsigned short     pio_pcdat;      /* port C data register     */
-    volatile unsigned short     pio_pcint;      /* port C interrupt cntrl reg */
-    volatile unsigned char      RESERVED29[0x16];       /* Reserved area    */
-    /* Timer */
-    volatile unsigned short     timer_tgcr;     /* timer global configuration reg */
-    volatile unsigned char      RESERVED30[0xe];        /* Reserved area    */
-    volatile unsigned short     timer_tmr1;     /* timer 1 mode reg         */
-    volatile unsigned short     timer_tmr2;     /* timer 2 mode reg         */
-    volatile unsigned short     timer_trr1;     /* timer 1 referance reg    */
-    volatile unsigned short     timer_trr2;     /* timer 2 referance reg    */
-    volatile unsigned short     timer_tcr1;     /* timer 1 capture reg      */
-    volatile unsigned short     timer_tcr2;     /* timer 2 capture reg      */
-    volatile unsigned short     timer_tcn1;     /* timer 1 counter reg      */
-    volatile unsigned short     timer_tcn2;     /* timer 2 counter reg      */
-    volatile unsigned short     timer_tmr3;     /* timer 3 mode reg         */
-    volatile unsigned short     timer_tmr4;     /* timer 4 mode reg         */
-    volatile unsigned short     timer_trr3;     /* timer 3 referance reg    */
-    volatile unsigned short     timer_trr4;     /* timer 4 referance reg    */
-    volatile unsigned short     timer_tcr3;     /* timer 3 capture reg      */
-    volatile unsigned short     timer_tcr4;     /* timer 4 capture reg      */
-    volatile unsigned short     timer_tcn3;     /* timer 3 counter reg      */
-    volatile unsigned short     timer_tcn4;     /* timer 4 counter reg      */
-    volatile unsigned short     timer_ter1;     /* timer 1 event reg        */
-    volatile unsigned short     timer_ter2;     /* timer 2 event reg        */
-    volatile unsigned short     timer_ter3;     /* timer 3 event reg        */
-    volatile unsigned short     timer_ter4;     /* timer 4 event reg        */
-    volatile unsigned char      RESERVED34[0x8];        /* Reserved area    */
-    /* CP */
-    volatile unsigned short     cp_cr;          /* command register         */
-    volatile unsigned char      RESERVED35[0x2];        /* Reserved area    */
-    volatile unsigned short     cp_rccr;        /* main configuration reg   */
-    volatile unsigned char      RESERVED37;     /* Reserved area            */
-    volatile unsigned char      cp_rmds;        /* development support status reg */
-    volatile unsigned long      cp_rmdr;        /* development support control reg */
-    volatile unsigned short     cp_rctr1;       /* ram break register 1     */
-    volatile unsigned short     cp_rctr2;       /* ram break register 2     */
-    volatile unsigned short     cp_rctr3;       /* ram break register 3     */
-    volatile unsigned short     cp_rctr4;       /* ram break register 4     */
-    volatile unsigned char      RESERVED59[0x2];        /* Reserved area    */
-    volatile unsigned short     cp_rter;        /* RISC timers event reg    */
-    volatile unsigned char      RESERVED38[0x2];        /* Reserved area    */
-    volatile unsigned short     cp_rtmr;        /* RISC timers mask reg     */
-    volatile unsigned char      RESERVED39[0x14];       /* Reserved area    */
-    /* BRG */
-    union {
-        volatile unsigned long l;
-        struct {
-            volatile unsigned short BRGC_RESERV:14;
-            volatile unsigned short rst:1;
-            volatile unsigned short en:1;
-            volatile unsigned short extc:2;
-            volatile unsigned short atb:1;
-            volatile unsigned short cd:12;
-            volatile unsigned short div16:1;
-        } b;
-    } brgc[4];                                  /* BRG1-BRG4 configuration regs*/
-    /* SCC registers */
-    struct scc_regs {
-        union {
-            struct {
-                /* Low word. */
-                volatile unsigned short GSMR_RESERV2:1;
-                volatile unsigned short edge:2;
-                volatile unsigned short tci:1;
-                volatile unsigned short tsnc:2;
-                volatile unsigned short rinv:1;
-                volatile unsigned short tinv:1;
-                volatile unsigned short tpl:3;
-                volatile unsigned short tpp:2;
-                volatile unsigned short tend:1;
-                volatile unsigned short tdcr:2;
-                volatile unsigned short rdcr:2;
-                volatile unsigned short renc:3;
-                volatile unsigned short tenc:3;
-                volatile unsigned short diag:2;
-                volatile unsigned short enr:1;
-                volatile unsigned short ent:1;
-                volatile unsigned short mode:4;
-                /* High word. */
-                volatile unsigned short GSMR_RESERV1:14;
-                volatile unsigned short pri:1;
-                volatile unsigned short gde:1;
-                volatile unsigned short tcrc:2;
-                volatile unsigned short revd:1;
-                volatile unsigned short trx:1;
-                volatile unsigned short ttx:1;
-                volatile unsigned short cdp:1;
-                volatile unsigned short ctsp:1;
-                volatile unsigned short cds:1;
-                volatile unsigned short ctss:1;
-                volatile unsigned short tfl:1;
-                volatile unsigned short rfw:1;
-                volatile unsigned short txsy:1;
-                volatile unsigned short synl:2;
-                volatile unsigned short rtsm:1;
-                volatile unsigned short rsyn:1;
-            } b;
-            struct {
-                volatile unsigned long low;
-                volatile unsigned long high;
-            } w;
-        } scc_gsmr;                         /* SCC general mode reg         */
-        volatile unsigned short scc_psmr;   /* protocol specific mode reg   */
-        volatile unsigned char  RESERVED42[0x2]; /* Reserved area           */
-        volatile unsigned short scc_todr; /* SCC transmit on demand         */
-        volatile unsigned short scc_dsr;        /* SCC data sync reg        */
-        volatile unsigned short scc_scce;       /* SCC event reg            */
-        volatile unsigned char  RESERVED43[0x2];/* Reserved area            */
-        volatile unsigned short scc_sccm;       /* SCC mask reg             */
-        volatile unsigned char  RESERVED44[0x1];/* Reserved area            */
-        volatile unsigned char  scc_sccs;       /* SCC status reg           */
-        volatile unsigned char  RESERVED45[0x8]; /* Reserved area           */
-    } scc_regs[4];
-    /* SMC */
-    struct smc_regs {
-        volatile unsigned char  RESERVED46[0x2]; /* Reserved area           */
-        volatile unsigned short smc_smcmr;       /* SMC mode reg            */
-        volatile unsigned char  RESERVED60[0x2]; /* Reserved area           */
-        volatile unsigned char  smc_smce;        /* SMC event reg           */
-        volatile unsigned char  RESERVED47[0x3]; /* Reserved area           */
-        volatile unsigned char  smc_smcm;        /* SMC mask reg            */
-        volatile unsigned char  RESERVED48[0x5]; /* Reserved area           */
-    } smc_regs[2];
-    /* SPI */
-    volatile unsigned short     spi_spmode;     /* SPI mode reg             */
-    volatile unsigned char      RESERVED51[0x4];        /* Reserved area    */
-    volatile unsigned char      spi_spie;       /* SPI event reg            */
-    volatile unsigned char      RESERVED52[0x3];        /* Reserved area    */
-    volatile unsigned char      spi_spim;       /* SPI mask reg             */
-    volatile unsigned char      RESERVED53[0x2];        /* Reserved area    */
-    volatile unsigned char      spi_spcom;      /* SPI command reg          */
-    volatile unsigned char      RESERVED54[0x4];        /* Reserved area    */
-    /* PIP */
-    volatile unsigned short     pip_pipc;       /* pip configuration reg    */
-    volatile unsigned char      RESERVED65[0x2];        /* Reserved area    */
-    volatile unsigned short     pip_ptpr;       /* pip timing parameters reg */
-    volatile unsigned long      pip_pbdir;      /* port b data direction reg */
-    volatile unsigned long      pip_pbpar;      /* port b pin assignment reg */
-    volatile unsigned long      pip_pbodr;      /* port b open drain reg    */
-    volatile unsigned long      pip_pbdat;      /* port b data reg          */
-    volatile unsigned char      RESERVED71[0x18];       /* Reserved area    */
-    /* Serial Interface */
-    volatile unsigned long      si_simode;      /* SI mode register         */
-    volatile unsigned char      si_sigmr;       /* SI global mode register  */
-    volatile unsigned char      RESERVED55;     /* Reserved area            */
-    volatile unsigned char      si_sistr;       /* SI status register       */
-    volatile unsigned char      si_sicmr;       /* SI command register      */
-    volatile unsigned char      RESERVED56[0x4]; /* Reserved area           */
-    volatile unsigned long      si_sicr;        /* SI clock routing         */
-    volatile unsigned long      si_sirp;        /* SI ram pointers          */
-    volatile unsigned char      RESERVED57[0xc]; /* Reserved area           */
-    volatile unsigned short     si_siram[0x80]; /* SI routing ram          */
-} QUICC;
-
-#endif
-
-/*
- * Local variables:
- *  c-indent-level: 4
- *  c-basic-offset: 4
- *  tab-width: 4
- * End:
- */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/m68360_regs.h b/ANDROID_3.4.5/arch/m68k/include/asm/m68360_regs.h
deleted file mode 100644
index d57217ca..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/m68360_regs.h
+++ /dev/null
@@ -1,408 +0,0 @@
-/***********************************
- * $Id: m68360_regs.h,v 1.2 2002/10/26 15:03:55 gerg Exp $
- ***********************************
- *
- ***************************************
- * Definitions of the QUICC registers
- ***************************************
- */
-
-#ifndef __REGISTERS_H
-#define __REGISTERS_H
-
-#define CLEAR_BIT(x, bit)  x =bit 
-
-/*****************************************************************
-        Command Register
-*****************************************************************/
-
-/* bit fields within command register */
-#define SOFTWARE_RESET  0x8000
-#define CMD_OPCODE      0x0f00
-#define CMD_CHANNEL     0x00f0
-#define CMD_FLAG        0x0001
-
-/* general command opcodes */
-#define INIT_RXTX_PARAMS        0x0000
-#define INIT_RX_PARAMS          0x0100
-#define INIT_TX_PARAMS          0x0200
-#define ENTER_HUNT_MODE         0x0300
-#define STOP_TX                 0x0400
-#define GR_STOP_TX              0x0500
-#define RESTART_TX              0x0600
-#define CLOSE_RX_BD             0x0700
-#define SET_ENET_GROUP          0x0800
-#define RESET_ENET_GROUP        0x0900
-
-/* quicc32 CP commands */
-#define STOP_TX_32		0x0e00	/*add chan# bits 2-6 */
-#define ENTER_HUNT_MODE_32	0x1e00
-
-/* quicc32 mask/event SCC register */
-#define GOV	0x01
-#define GUN	0x02
-#define GINT	0x04
-#define IQOV	0x08
-
-
-/* Timer commands */
-#define SET_TIMER               0x0800
-
-/* Multi channel Interrupt structure */
-#define INTR_VALID	0x8000	/* Valid interrupt entry */
-#define INTR_WRAP	0x4000	/* Wrap bit in the interrupt entry table */
-#define INTR_CH_NU	0x07c0	/* Channel Num in interrupt table */
-#define INTR_MASK_BITS	0x383f
-
-/*
- * General SCC mode register (GSMR)
- */
-
-#define MODE_HDLC               0x0
-#define MODE_APPLE_TALK         0x2
-#define MODE_SS7                0x3
-#define MODE_UART               0x4
-#define MODE_PROFIBUS           0x5
-#define MODE_ASYNC_HDLC         0x6
-#define MODE_V14                0x7
-#define MODE_BISYNC             0x8
-#define MODE_DDCMP              0x9
-#define MODE_MULTI_CHANNEL      0xa
-#define MODE_ETHERNET           0xc
-
-#define DIAG_NORMAL             0x0
-#define DIAG_LOCAL_LPB          0x1
-#define DIAG_AUTO_ECHO          0x2
-#define DIAG_LBP_ECHO           0x3
-
-/* For RENC and TENC fields in GSMR */
-#define ENC_NRZ                 0x0
-#define ENC_NRZI                0x1
-#define ENC_FM0                 0x2
-#define ENC_MANCH               0x4
-#define ENC_DIFF_MANC           0x6
-
-/* For TDCR and RDCR fields in GSMR */
-#define CLOCK_RATE_1            0x0
-#define CLOCK_RATE_8            0x1
-#define CLOCK_RATE_16           0x2
-#define CLOCK_RATE_32           0x3
-
-#define TPP_00                  0x0
-#define TPP_10                  0x1
-#define TPP_01                  0x2
-#define TPP_11                  0x3
-
-#define TPL_NO                  0x0
-#define TPL_8                   0x1
-#define TPL_16                  0x2
-#define TPL_32                  0x3
-#define TPL_48                  0x4
-#define TPL_64                  0x5
-#define TPL_128                 0x6
-
-#define TSNC_INFINITE           0x0
-#define TSNC_14_65              0x1
-#define TSNC_4_15               0x2
-#define TSNC_3_1                0x3
-
-#define EDGE_BOTH               0x0
-#define EDGE_POS                0x1
-#define EDGE_NEG                0x2
-#define EDGE_NO                 0x3
-
-#define SYNL_NO                 0x0
-#define SYNL_4                  0x1
-#define SYNL_8                  0x2
-#define SYNL_16                 0x3
-
-#define TCRC_CCITT16            0x0
-#define TCRC_CRC16              0x1
-#define TCRC_CCITT32            0x2
-
-
-/*****************************************************************
-        TODR (Transmit on demand) Register
-*****************************************************************/
-#define TODR_TOD        0x8000  /* Transmit on demand */
-
-
-/*****************************************************************
-        CICR register settings
-*****************************************************************/
-
-/* note that relative irq priorities of the SCCs can be reordered
- * if desired - see p. 7-377 of the MC68360UM */
-#define CICR_SCA_SCC1           ((uint)0x00000000)      /* SCC1 @ SCCa */
-#define CICR_SCB_SCC2           ((uint)0x00040000)      /* SCC2 @ SCCb */
-#define CICR_SCC_SCC3           ((uint)0x00200000)      /* SCC3 @ SCCc */
-#define CICR_SCD_SCC4           ((uint)0x00c00000)      /* SCC4 @ SCCd */
-
-#define CICR_IRL_MASK           ((uint)0x0000e000)      /* Core interrupt */
-#define CICR_HP_MASK            ((uint)0x00001f00)      /* Hi-pri int. */
-#define CICR_VBA_MASK           ((uint)0x000000e0)      /* Vector Base Address */
-#define CICR_SPS                ((uint)0x00000001)      /* SCC Spread */
-
-
-/*****************************************************************
-       Interrupt bits for CIPR and CIMR (MC68360UM p. 7-379)
-*****************************************************************/
-
-#define INTR_PIO_PC0    0x80000000      /* parallel I/O C bit 0 */
-#define INTR_SCC1       0x40000000      /* SCC port 1 */
-#define INTR_SCC2       0x20000000      /* SCC port 2 */
-#define INTR_SCC3       0x10000000      /* SCC port 3 */
-#define INTR_SCC4       0x08000000      /* SCC port 4 */
-#define INTR_PIO_PC1    0x04000000      /* parallel i/o C bit 1 */
-#define INTR_TIMER1     0x02000000      /* timer 1 */
-#define INTR_PIO_PC2    0x01000000      /* parallel i/o C bit 2 */
-#define INTR_PIO_PC3    0x00800000      /* parallel i/o C bit 3 */
-#define INTR_SDMA_BERR  0x00400000      /* SDMA channel bus error */
-#define INTR_DMA1       0x00200000      /* idma 1 */
-#define INTR_DMA2       0x00100000      /* idma 2 */
-#define INTR_TIMER2     0x00040000      /* timer 2 */
-#define INTR_CP_TIMER   0x00020000      /* CP timer */
-#define INTR_PIP_STATUS 0x00010000      /* PIP status */
-#define INTR_PIO_PC4    0x00008000      /* parallel i/o C bit 4 */
-#define INTR_PIO_PC5    0x00004000      /* parallel i/o C bit 5 */
-#define INTR_TIMER3     0x00001000      /* timer 3 */
-#define INTR_PIO_PC6    0x00000800      /* parallel i/o C bit 6 */
-#define INTR_PIO_PC7    0x00000400      /* parallel i/o C bit 7 */
-#define INTR_PIO_PC8    0x00000200      /* parallel i/o C bit 8 */
-#define INTR_TIMER4     0x00000080      /* timer 4 */
-#define INTR_PIO_PC9    0x00000040      /* parallel i/o C bit 9 */
-#define INTR_SCP        0x00000020      /* SCP */
-#define INTR_SMC1       0x00000010      /* SMC 1 */
-#define INTR_SMC2       0x00000008      /* SMC 2 */
-#define INTR_PIO_PC10   0x00000004      /* parallel i/o C bit 10 */
-#define INTR_PIO_PC11   0x00000002      /* parallel i/o C bit 11 */
-#define INTR_ERR        0x00000001      /* error */
-
-
-/*****************************************************************
-        CPM Interrupt vector encodings (MC68360UM p. 7-376)
-*****************************************************************/
-
-#define CPMVEC_NR		32
-#define CPMVEC_PIO_PC0		0x1f
-#define CPMVEC_SCC1		0x1e
-#define CPMVEC_SCC2		0x1d
-#define CPMVEC_SCC3		0x1c
-#define CPMVEC_SCC4		0x1b
-#define CPMVEC_PIO_PC1		0x1a
-#define CPMVEC_TIMER1		0x19
-#define CPMVEC_PIO_PC2		0x18
-#define CPMVEC_PIO_PC3		0x17
-#define CPMVEC_SDMA_CB_ERR	0x16
-#define CPMVEC_IDMA1		0x15
-#define CPMVEC_IDMA2		0x14
-#define CPMVEC_RESERVED3	0x13
-#define CPMVEC_TIMER2		0x12
-#define CPMVEC_RISCTIMER	0x11
-#define CPMVEC_RESERVED2	0x10
-#define CPMVEC_PIO_PC4		0x0f
-#define CPMVEC_PIO_PC5		0x0e
-#define CPMVEC_TIMER3		0x0c
-#define CPMVEC_PIO_PC6		0x0b
-#define CPMVEC_PIO_PC7		0x0a
-#define CPMVEC_PIO_PC8		0x09
-#define CPMVEC_RESERVED1	0x08
-#define CPMVEC_TIMER4		0x07
-#define CPMVEC_PIO_PC9		0x06
-#define CPMVEC_SPI		0x05
-#define CPMVEC_SMC1		0x04
-#define CPMVEC_SMC2		0x03
-#define CPMVEC_PIO_PC10		0x02
-#define CPMVEC_PIO_PC11		0x01
-#define CPMVEC_ERROR		0x00
-
-/* #define CPMVEC_PIO_PC0		((ushort)0x1f) */
-/* #define CPMVEC_SCC1		((ushort)0x1e) */
-/* #define CPMVEC_SCC2		((ushort)0x1d) */
-/* #define CPMVEC_SCC3		((ushort)0x1c) */
-/* #define CPMVEC_SCC4		((ushort)0x1b) */
-/* #define CPMVEC_PIO_PC1		((ushort)0x1a) */
-/* #define CPMVEC_TIMER1		((ushort)0x19) */
-/* #define CPMVEC_PIO_PC2		((ushort)0x18) */
-/* #define CPMVEC_PIO_PC3		((ushort)0x17) */
-/* #define CPMVEC_SDMA_CB_ERR	((ushort)0x16) */
-/* #define CPMVEC_IDMA1		((ushort)0x15) */
-/* #define CPMVEC_IDMA2		((ushort)0x14) */
-/* #define CPMVEC_RESERVED3	((ushort)0x13) */
-/* #define CPMVEC_TIMER2		((ushort)0x12) */
-/* #define CPMVEC_RISCTIMER	((ushort)0x11) */
-/* #define CPMVEC_RESERVED2	((ushort)0x10) */
-/* #define CPMVEC_PIO_PC4		((ushort)0x0f) */
-/* #define CPMVEC_PIO_PC5		((ushort)0x0e) */
-/* #define CPMVEC_TIMER3		((ushort)0x0c) */
-/* #define CPMVEC_PIO_PC6		((ushort)0x0b) */
-/* #define CPMVEC_PIO_PC7		((ushort)0x0a) */
-/* #define CPMVEC_PIO_PC8		((ushort)0x09) */
-/* #define CPMVEC_RESERVED1	((ushort)0x08) */
-/* #define CPMVEC_TIMER4		((ushort)0x07) */
-/* #define CPMVEC_PIO_PC9		((ushort)0x06) */
-/* #define CPMVEC_SPI		((ushort)0x05) */
-/* #define CPMVEC_SMC1		((ushort)0x04) */
-/* #define CPMVEC_SMC2		((ushort)0x03) */
-/* #define CPMVEC_PIO_PC10		((ushort)0x02) */
-/* #define CPMVEC_PIO_PC11		((ushort)0x01) */
-/* #define CPMVEC_ERROR		((ushort)0x00) */
-
-
-/*****************************************************************
- *        PIO control registers
- *****************************************************************/
-
-/* Port A - See 360UM p. 7-358
- * 
- *  Note that most of these pins have alternate functions
- */
-
-
-/* The macros are nice, but there are all sorts of references to 1-indexed
- * facilities on the 68360... */
-/* #define PA_RXD(n)	((ushort)(0x01<<(2*n))) */
-/* #define PA_TXD(n)	((ushort)(0x02<<(2*n))) */
-
-#define PA_RXD1		((ushort)0x0001)
-#define PA_TXD1		((ushort)0x0002)
-#define PA_RXD2		((ushort)0x0004)
-#define PA_TXD2		((ushort)0x0008)
-#define PA_RXD3		((ushort)0x0010)
-#define PA_TXD3		((ushort)0x0020)
-#define PA_RXD4		((ushort)0x0040)
-#define PA_TXD4		((ushort)0x0080)
-
-#define PA_CLK1		((ushort)0x0100)
-#define PA_CLK2		((ushort)0x0200)
-#define PA_CLK3		((ushort)0x0400)
-#define PA_CLK4		((ushort)0x0800)
-#define PA_CLK5		((ushort)0x1000)
-#define PA_CLK6		((ushort)0x2000)
-#define PA_CLK7		((ushort)0x4000)
-#define PA_CLK8		((ushort)0x8000)
-
-
-/* Port B - See 360UM p. 7-362
- */
-
-
-/* Port C - See 360UM p. 7-365
- */
-
-#define PC_RTS1		((ushort)0x0001)
-#define PC_RTS2		((ushort)0x0002)
-#define PC__RTS3	((ushort)0x0004) /* !RTS3 */
-#define PC__RTS4	((ushort)0x0008) /* !RTS4 */
-
-#define PC_CTS1		((ushort)0x0010)
-#define PC_CD1		((ushort)0x0020)
-#define PC_CTS2		((ushort)0x0040)
-#define PC_CD2		((ushort)0x0080)
-#define PC_CTS3		((ushort)0x0100)
-#define PC_CD3		((ushort)0x0200)
-#define PC_CTS4		((ushort)0x0400)
-#define PC_CD4		((ushort)0x0800)
-
-
-
-/*****************************************************************
-        chip select option register
-*****************************************************************/
-#define DTACK           0xe000
-#define ADR_MASK        0x1ffc
-#define RDWR_MASK       0x0002
-#define FC_MASK         0x0001
-
-/*****************************************************************
-        tbase and rbase registers
-*****************************************************************/
-#define TBD_ADDR(quicc,pram) ((struct quicc_bd *) \
-    (quicc->ch_or_u.u.udata_bd_ucode + pram->tbase))
-#define RBD_ADDR(quicc,pram) ((struct quicc_bd *) \
-    (quicc->ch_or_u.u.udata_bd_ucode + pram->rbase))
-#define TBD_CUR_ADDR(quicc,pram) ((struct quicc_bd *) \
-    (quicc->ch_or_u.u.udata_bd_ucode + pram->tbptr))
-#define RBD_CUR_ADDR(quicc,pram) ((struct quicc_bd *) \
-    (quicc->ch_or_u.u.udata_bd_ucode + pram->rbptr))
-#define TBD_SET_CUR_ADDR(bd,quicc,pram) pram->tbptr = \
-    ((unsigned short)((char *)(bd) - (char *)(quicc->ch_or_u.u.udata_bd_ucode)))
-#define RBD_SET_CUR_ADDR(bd,quicc,pram) pram->rbptr = \
-    ((unsigned short)((char *)(bd) - (char *)(quicc->ch_or_u.u.udata_bd_ucode)))
-#define INCREASE_TBD(bd,quicc,pram) {  \
-    if((bd)->status & T_W)             \
-        (bd) = TBD_ADDR(quicc,pram);   \
-    else                               \
-        (bd)++;                        \
-}
-#define DECREASE_TBD(bd,quicc,pram) {  \
-    if ((bd) == TBD_ADDR(quicc, pram)) \
-        while (!((bd)->status & T_W))  \
-            (bd)++;                    \
-    else                               \
-        (bd)--;                        \
-}
-#define INCREASE_RBD(bd,quicc,pram) {  \
-    if((bd)->status & R_W)             \
-        (bd) = RBD_ADDR(quicc,pram);   \
-    else                               \
-        (bd)++;                        \
-}
-#define DECREASE_RBD(bd,quicc,pram) {  \
-    if ((bd) == RBD_ADDR(quicc, pram)) \
-        while (!((bd)->status & T_W))  \
-            (bd)++;                    \
-    else                               \
-        (bd)--;                        \
-}
-
-/*****************************************************************
-        Macros for Multi channel
-*****************************************************************/
-#define QMC_BASE(quicc,page) (struct global_multi_pram *)(&quicc->pram[page])
-#define MCBASE(quicc,page) (unsigned long)(quicc->pram[page].m.mcbase)
-#define CHANNEL_PRAM_BASE(quicc,channel) ((struct quicc32_pram *) \
-		(&(quicc->ch_or_u.ch_pram_tbl[channel])))
-#define TBD_32_ADDR(quicc,page,channel) ((struct quicc_bd *) \
-    (MCBASE(quicc,page) + (CHANNEL_PRAM_BASE(quicc,channel)->tbase)))
-#define RBD_32_ADDR(quicc,page,channel) ((struct quicc_bd *) \
-    (MCBASE(quicc,page) + (CHANNEL_PRAM_BASE(quicc,channel)->rbase)))
-#define TBD_32_CUR_ADDR(quicc,page,channel) ((struct quicc_bd *) \
-    (MCBASE(quicc,page) + (CHANNEL_PRAM_BASE(quicc,channel)->tbptr)))
-#define RBD_32_CUR_ADDR(quicc,page,channel) ((struct quicc_bd *) \
-    (MCBASE(quicc,page) + (CHANNEL_PRAM_BASE(quicc,channel)->rbptr)))
-#define TBD_32_SET_CUR_ADDR(bd,quicc,page,channel) \
-     CHANNEL_PRAM_BASE(quicc,channel)->tbptr = \
-    ((unsigned short)((char *)(bd) - (char *)(MCBASE(quicc,page))))
-#define RBD_32_SET_CUR_ADDR(bd,quicc,page,channel) \
-     CHANNEL_PRAM_BASE(quicc,channel)->rbptr = \
-    ((unsigned short)((char *)(bd) - (char *)(MCBASE(quicc,page))))
-
-#define INCREASE_TBD_32(bd,quicc,page,channel) {  \
-    if((bd)->status & T_W)                        \
-        (bd) = TBD_32_ADDR(quicc,page,channel);   \
-    else                                          \
-        (bd)++;                                   \
-}
-#define DECREASE_TBD_32(bd,quicc,page,channel) {  \
-    if ((bd) == TBD_32_ADDR(quicc, page,channel)) \
-        while (!((bd)->status & T_W))             \
-            (bd)++;                               \
-    else                                          \
-        (bd)--;                                   \
-}
-#define INCREASE_RBD_32(bd,quicc,page,channel) {  \
-    if((bd)->status & R_W)                        \
-        (bd) = RBD_32_ADDR(quicc,page,channel);   \
-    else                                          \
-        (bd)++;                                   \
-}
-#define DECREASE_RBD_32(bd,quicc,page,channel) {  \
-    if ((bd) == RBD_32_ADDR(quicc, page,channel)) \
-        while (!((bd)->status & T_W))             \
-            (bd)++;                               \
-    else                                          \
-        (bd)--;                                   \
-}
-
-#endif
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/mac_asc.h b/ANDROID_3.4.5/arch/m68k/include/asm/mac_asc.h
deleted file mode 100644
index fc2e5467..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/mac_asc.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- *	Apple Sound Chip
- */
-
-#ifndef __ASM_MAC_ASC_H
-#define __ASM_MAC_ASC_H
-
-/*
- *	ASC offsets and controls
- */
-
-#define ASC_BUF_BASE	0x00	/* RAM buffer offset */
-#define ASC_BUF_SIZE	0x800
-
-#define ASC_CONTROL	0x800
-#define ASC_CONTROL_OFF		0x00
-#define ASC_FREQ(chan,byte)	((0x810)+((chan)<<3)+(byte))
-#define ASC_ENABLE	0x801
-#define ASC_ENABLE_SAMPLE	0x02
-#define ASC_MODE	0x802
-#define ASC_MODE_SAMPLE		0x02
-
-#define ASC_VOLUME	0x806
-#define ASC_CHAN	0x807	/* ??? */
-
-
-#endif
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/mac_baboon.h b/ANDROID_3.4.5/arch/m68k/include/asm/mac_baboon.h
deleted file mode 100644
index a2d32f65..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/mac_baboon.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * Definitions for the "Baboon" custom IC on the PowerBook 190.
- */
-
-#define BABOON_BASE (0x50F1A000)	/* same as IDE controller base */
-
-#ifndef __ASSEMBLY__
-
-struct baboon {
-	char	pad1[208];	/* generic IDE registers, not used here */
-	short	mb_control;	/* Control register:
-				 * bit 5 : slot 2 power control
-				 * bit 6 : slot 1 power control
-				 */
-	char	pad2[2];
-	short	mb_status;	/* (0xD4) media bay status register:
-				 *
-				 * bit 0: ????
-				 * bit 1: IDE interrupt active?
-				 * bit 2: bay status, 0 = full, 1 = empty
-				 * bit 3: ????
-				 */
-	char	pad3[2];	/* (0xD6) not used */
-	short	mb_ifr;		/* (0xD8) media bay interrupt flags register:
-				 *
-				 * bit 0: ????
-				 * bit 1: IDE controller interrupt
-				 * bit 2: media bay status change interrupt
-				 */
-};
-
-extern int baboon_present;
-
-extern void baboon_register_interrupts(void);
-extern void baboon_irq_enable(int);
-extern void baboon_irq_disable(int);
-
-#endif /* __ASSEMBLY **/
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/mac_iop.h b/ANDROID_3.4.5/arch/m68k/include/asm/mac_iop.h
deleted file mode 100644
index fde874a0..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/mac_iop.h
+++ /dev/null
@@ -1,164 +0,0 @@
-/*
- * I/O Processor (IOP) defines and structures, mostly snagged from A/UX
- * header files.
- *
- * The original header from which this was taken is copyrighted. I've done some
- * rewriting (in fact my changes make this a bit more readable, IMHO) but some
- * more should be done.
- */
-
-/*
- * This is the base address of the IOPs. Use this as the address of
- * a "struct iop" (see below) to see where the actual registers fall.
- */
-
-#define SCC_IOP_BASE_IIFX	(0x50F04000)
-#define ISM_IOP_BASE_IIFX	(0x50F12000)
-
-#define SCC_IOP_BASE_QUADRA	(0x50F0C000)
-#define ISM_IOP_BASE_QUADRA	(0x50F1E000)
-
-/* IOP status/control register bits: */
-
-#define	IOP_BYPASS	0x01	/* bypass-mode hardware access */
-#define	IOP_AUTOINC	0x02	/* allow autoincrement of ramhi/lo */
-#define	IOP_RUN		0x04	/* set to 0 to reset IOP chip */
-#define	IOP_IRQ		0x08	/* generate IRQ to IOP if 1 */
-#define	IOP_INT0	0x10	/* intr priority from IOP to host */
-#define	IOP_INT1	0x20	/* intr priority from IOP to host */
-#define	IOP_HWINT	0x40	/* IRQ from hardware; bypass mode only */
-#define	IOP_DMAINACTIVE	0x80	/* no DMA request active; bypass mode only */
-
-#define NUM_IOPS	2
-#define NUM_IOP_CHAN	7
-#define NUM_IOP_MSGS	NUM_IOP_CHAN*8
-#define IOP_MSG_LEN	32
-
-/* IOP reference numbers, used by the globally-visible iop_xxx functions */
-
-#define IOP_NUM_SCC	0
-#define IOP_NUM_ISM	1
-
-/* IOP channel states */
-
-#define IOP_MSG_IDLE		0       /* idle                         */
-#define IOP_MSG_NEW		1       /* new message sent             */
-#define IOP_MSG_RCVD		2       /* message received; processing */
-#define IOP_MSG_COMPLETE	3       /* message processing complete  */
-
-/* IOP message status codes */
-
-#define IOP_MSGSTATUS_UNUSED	0	/* Unusued message structure       */
-#define IOP_MSGSTATUS_WAITING	1	/* waiting for channel             */
-#define IOP_MSGSTATUS_SENT	2	/* message sent, awaiting reply    */
-#define IOP_MSGSTATUS_COMPLETE	3	/* message complete and reply rcvd */
-#define IOP_MSGSTATUS_UNSOL	6	/* message is unsolicited          */
-
-/* IOP memory addresses of the members of the mac_iop_kernel structure. */
-
-#define IOP_ADDR_MAX_SEND_CHAN	0x0200
-#define IOP_ADDR_SEND_STATE	0x0201
-#define IOP_ADDR_PATCH_CTRL	0x021F
-#define IOP_ADDR_SEND_MSG	0x0220
-#define IOP_ADDR_MAX_RECV_CHAN	0x0300
-#define IOP_ADDR_RECV_STATE	0x0301
-#define IOP_ADDR_ALIVE		0x031F
-#define IOP_ADDR_RECV_MSG	0x0320
-
-#ifndef __ASSEMBLY__
-
-/*
- * IOP Control registers, staggered because in usual Apple style they were
- * too lazy to decode the A0 bit. This structure is assumed to begin at
- * one of the xxx_IOP_BASE addresses given above.
- */
-
-struct mac_iop {
-    __u8	ram_addr_hi;	/* shared RAM address hi byte */
-    __u8	pad0;
-    __u8	ram_addr_lo;	/* shared RAM address lo byte */
-    __u8	pad1;
-    __u8	status_ctrl;	/* status/control register */
-    __u8	pad2[3];
-    __u8	ram_data;	/* RAM data byte at ramhi/lo */
-
-    __u8	pad3[23];
-
-    /* Bypass-mode hardware access registers */
-
-    union {
-	struct {		/* SCC registers */
-	    __u8 sccb_cmd;	/* SCC B command reg */
-	    __u8 pad4;
-	    __u8 scca_cmd;	/* SCC A command reg */
-	    __u8 pad5;
-	    __u8 sccb_data;	/* SCC B data */
-	    __u8 pad6;
-	    __u8 scca_data;	/* SCC A data */
-	} scc_regs;
-
-	struct {		/* ISM registers */
-	    __u8 wdata;		/* write a data byte */
-	    __u8 pad7;
-	    __u8 wmark;		/* write a mark byte */
-	    __u8 pad8;
-	    __u8 wcrc;		/* write 2-byte crc to disk */
-	    __u8 pad9;
-	    __u8 wparams;	/* write the param regs */
-	    __u8 pad10;
-	    __u8 wphase;	/* write the phase states & dirs */
-	    __u8 pad11;
-	    __u8 wsetup;	/* write the setup register */
-	    __u8 pad12;
-	    __u8 wzeroes;	/* mode reg: 1's clr bits, 0's are x */
-	    __u8 pad13;
-	    __u8 wones;		/* mode reg: 1's set bits, 0's are x */
-	    __u8 pad14;
-	    __u8 rdata;		/* read a data byte */
-	    __u8 pad15;
-	    __u8 rmark;		/* read a mark byte */
-	    __u8 pad16;
-	    __u8 rerror;	/* read the error register */
-	    __u8 pad17;
-	    __u8 rparams;	/* read the param regs */
-	    __u8 pad18;
-	    __u8 rphase;	/* read the phase states & dirs */
-	    __u8 pad19;
-	    __u8 rsetup;	/* read the setup register */
-	    __u8 pad20;
-	    __u8 rmode;		/* read the mode register */
-	    __u8 pad21;
-	    __u8 rhandshake;	/* read the handshake register */
-	} ism_regs;
-    } b;
-};
-
-/* This structure is used to track IOP messages in the Linux kernel */
-
-struct iop_msg {
-	struct iop_msg	*next;		/* next message in queue or NULL     */
-	uint	iop_num;		/* IOP number                        */
-	uint	channel;		/* channel number                    */
-	void	*caller_priv;		/* caller private data               */
-	int	status;			/* status of this message            */
-	__u8	message[IOP_MSG_LEN];	/* the message being sent/received   */
-	__u8	reply[IOP_MSG_LEN];	/* the reply to the message          */
-	void	(*handler)(struct iop_msg *);
-					/* function to call when reply recvd */
-};
-
-extern int iop_scc_present,iop_ism_present;
-
-extern int iop_listen(uint, uint,
-			void (*handler)(struct iop_msg *),
-			const char *);
-extern int iop_send_message(uint, uint, void *, uint, __u8 *,
-			    void (*)(struct iop_msg *));
-extern void iop_complete_message(struct iop_msg *);
-extern void iop_upload_code(uint, __u8 *, uint, __u16);
-extern void iop_download_code(uint, __u8 *, uint, __u16);
-extern __u8 *iop_compare_code(uint, __u8 *, uint, __u16);
-
-extern void iop_register_interrupts(void);
-
-#endif /* __ASSEMBLY__ */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/mac_mouse.h b/ANDROID_3.4.5/arch/m68k/include/asm/mac_mouse.h
deleted file mode 100644
index 39a5c292..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/mac_mouse.h
+++ /dev/null
@@ -1,23 +0,0 @@
-#ifndef _ASM_MAC_MOUSE_H
-#define _ASM_MAC_MOUSE_H
-
-/*
- * linux/include/asm-m68k/mac_mouse.h
- * header file for Macintosh ADB mouse driver
- * 27-10-97 Michael Schmitz
- * copied from:
- * header file for Atari Mouse driver
- * by Robert de Vries (robert@and.nl) on 19Jul93
- */
-
-struct mouse_status {
-	char		buttons;
-	short		dx;
-	short		dy;
-	int		ready;
-	int		active;
-	wait_queue_head_t wait;
-	struct fasync_struct *fasyncptr;
-};
-
-#endif
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/mac_oss.h b/ANDROID_3.4.5/arch/m68k/include/asm/mac_oss.h
deleted file mode 100644
index 425fbff4..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/mac_oss.h
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
- *	OSS
- *
- *	This is used in place of VIA2 on the IIfx.
- */
-
-#define OSS_BASE	(0x50f1a000)
-
-/*
- * Interrupt level offsets for mac_oss->irq_level
- */
-
-#define OSS_NUBUS0	0
-#define OSS_NUBUS1	1
-#define OSS_NUBUS2	2
-#define OSS_NUBUS3	3
-#define OSS_NUBUS4	4
-#define OSS_NUBUS5	5
-#define OSS_IOPISM	6
-#define OSS_IOPSCC	7
-#define OSS_SOUND	8
-#define OSS_SCSI	9
-#define OSS_60HZ	10
-#define OSS_VIA1	11
-#define OSS_UNUSED1	12
-#define OSS_UNUSED2	13
-#define OSS_PARITY	14
-#define OSS_UNUSED3	15
-
-#define OSS_NUM_SOURCES	16
-
-/*
- * Pending interrupt bits in mac_oss->irq_pending
- */
-
-#define OSS_IP_NUBUS0	0x0001
-#define OSS_IP_NUBUS1	0x0002
-#define OSS_IP_NUBUS2	0x0004
-#define OSS_IP_NUBUS3	0x0008
-#define OSS_IP_NUBUS4	0x0010
-#define OSS_IP_NUBUS5	0x0020
-#define OSS_IP_IOPISM	0x0040
-#define OSS_IP_IOPSCC	0x0080
-#define OSS_IP_SOUND	0x0100
-#define OSS_IP_SCSI	0x0200
-#define OSS_IP_60HZ	0x0400
-#define OSS_IP_VIA1	0x0800
-#define OSS_IP_UNUSED1	0x1000
-#define OSS_IP_UNUSED2	0x2000
-#define OSS_IP_PARITY	0x4000
-#define OSS_IP_UNUSED3	0x8000
-
-#define OSS_IP_NUBUS (OSS_IP_NUBUS0|OSS_IP_NUBUS1|OSS_IP_NUBUS2|OSS_IP_NUBUS3|OSS_IP_NUBUS4|OSS_IP_NUBUS5)
-
-/*
- * Rom Control Register
- */
-
-#define OSS_POWEROFF	0x80
-
-#ifndef __ASSEMBLY__
-
-struct mac_oss {
-    __u8  irq_level[0x10];	/* [0x000-0x00f] Interrupt levels */
-    __u8  padding0[0x1F2];	/* [0x010-0x201] IO space filler */
-    __u16 irq_pending;		/* [0x202-0x203] pending interrupts bits */
-    __u8  rom_ctrl;		/* [0x204-0x204] ROM cntl reg (for poweroff) */
-    __u8  padding1[0x2];	/* [0x205-0x206] currently unused by A/UX */
-    __u8  ack_60hz;		/* [0x207-0x207] 60 Hz ack. */
-};
-
-extern volatile struct mac_oss *oss;
-extern int oss_present;
-
-extern void oss_register_interrupts(void);
-extern void oss_irq_enable(int);
-extern void oss_irq_disable(int);
-
-#endif /* __ASSEMBLY__ */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/mac_psc.h b/ANDROID_3.4.5/arch/m68k/include/asm/mac_psc.h
deleted file mode 100644
index e5c0d71d..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/mac_psc.h
+++ /dev/null
@@ -1,252 +0,0 @@
-/*
- * Apple Peripheral System Controller (PSC)
- *
- * The PSC is used on the AV Macs to control IO functions not handled
- * by the VIAs (Ethernet, DSP, SCC, Sound). This includes nine DMA
- * channels.
- *
- * The first seven DMA channels appear to be "one-shot" and are actually
- * sets of two channels; one member is active while the other is being
- * configured, and then you flip the active member and start all over again.
- * The one-shot channels are grouped together and are:
- *
- * 1. SCSI
- * 2. Ethernet Read
- * 3. Ethernet Write
- * 4. Floppy Disk Controller
- * 5. SCC Channel A Receive
- * 6. SCC Channel B Receive
- * 7. SCC Channel A Transmit
- *
- * The remaining two channels are handled somewhat differently. They appear
- * to be closely tied and share one set of registers. They also seem to run
- * continuously, although how you keep the buffer filled in this scenario is
- * not understood as there seems to be only one input and one output buffer
- * pointer.
- *
- * Much of this was extrapolated from what was known about the Ethernet
- * registers and subsequently confirmed using MacsBug (ie by pinging the
- * machine with easy-to-find patterns and looking for them in the DMA
- * buffers, or by sending a file over the serial ports and finding the
- * file in the buffers.)
- *
- * 1999-05-25 (jmt)
- */
-
-#define PSC_BASE	(0x50F31000)
-
-/*
- * The IER/IFR registers work like the VIA, except that it has 4
- * of them each on different interrupt levels, and each register
- * set only seems to handle four interrupts instead of seven.
- *
- * To access a particular set of registers, add 0xn0 to the base
- * where n = 3,4,5 or 6.
- */
-
-#define pIFRbase	0x100
-#define pIERbase	0x104
-
-/*
- * One-shot DMA control registers
- */
-
-#define PSC_MYSTERY	0x804
-
-#define PSC_CTL_BASE	0xC00
-
-#define PSC_SCSI_CTL	0xC00
-#define PSC_ENETRD_CTL  0xC10
-#define PSC_ENETWR_CTL  0xC20
-#define PSC_FDC_CTL	0xC30
-#define PSC_SCCA_CTL	0xC40
-#define PSC_SCCB_CTL	0xC50
-#define PSC_SCCATX_CTL	0xC60
-
-/*
- * DMA channels. Add +0x10 for the second channel in the set.
- * You're supposed to use one channel while the other runs and
- * then flip channels and do the whole thing again.
- */
-
-#define PSC_ADDR_BASE	0x1000
-#define PSC_LEN_BASE	0x1004
-#define PSC_CMD_BASE	0x1008
-
-#define PSC_SET0	0x00
-#define PSC_SET1	0x10
-
-#define PSC_SCSI_ADDR	0x1000	/* confirmed */
-#define PSC_SCSI_LEN	0x1004	/* confirmed */
-#define PSC_SCSI_CMD	0x1008	/* confirmed */
-#define PSC_ENETRD_ADDR 0x1020	/* confirmed */
-#define PSC_ENETRD_LEN  0x1024	/* confirmed */
-#define PSC_ENETRD_CMD  0x1028	/* confirmed */
-#define PSC_ENETWR_ADDR 0x1040	/* confirmed */
-#define PSC_ENETWR_LEN  0x1044	/* confirmed */
-#define PSC_ENETWR_CMD  0x1048	/* confirmed */
-#define PSC_FDC_ADDR	0x1060	/* strongly suspected */
-#define PSC_FDC_LEN	0x1064	/* strongly suspected */
-#define PSC_FDC_CMD	0x1068	/* strongly suspected */
-#define PSC_SCCA_ADDR	0x1080	/* confirmed */
-#define PSC_SCCA_LEN	0x1084	/* confirmed */
-#define PSC_SCCA_CMD	0x1088	/* confirmed */
-#define PSC_SCCB_ADDR	0x10A0	/* confirmed */
-#define PSC_SCCB_LEN	0x10A4	/* confirmed */
-#define PSC_SCCB_CMD	0x10A8	/* confirmed */
-#define PSC_SCCATX_ADDR	0x10C0	/* confirmed */
-#define PSC_SCCATX_LEN	0x10C4	/* confirmed */
-#define PSC_SCCATX_CMD	0x10C8	/* confirmed */
-
-/*
- * Free-running DMA registers. The only part known for sure are the bits in
- * the control register, the buffer addresses and the buffer length. Everything
- * else is anybody's guess.
- *
- * These registers seem to be mirrored every thirty-two bytes up until offset
- * 0x300. It's safe to assume then that a new set of registers starts there.
- */
-
-#define PSC_SND_CTL	0x200	/*
-				 * [ 16-bit ]
-				 * Sound (Singer?) control register.
-				 *
-				 * bit 0  : ????
-				 * bit 1  : ????
-				 * bit 2  : Set to one to enable sound
-				 *          output. Possibly a mute flag.
-				 * bit 3  : ????
-				 * bit 4  : ????
-				 * bit 5  : ????
-				 * bit 6  : Set to one to enable pass-thru
-				 *          audio. In this mode the audio data
-				 *          seems to appear in both the input
-				 *          buffer and the output buffer.
-				 * bit 7  : Set to one to activate the
-				 *          sound input DMA or zero to
-				 *          disable it.
-				 * bit 8  : Set to one to activate the
-				 *          sound output DMA or zero to
-				 *          disable it.
-				 * bit 9  : \
-				 * bit 11 :  |
-				 *          These two bits control the sample
-				 *          rate. Usually set to binary 10 and
-				 *	    MacOS 8.0 says I'm at 48 KHz. Using
-				 *	    a binary value of 01 makes things
-				 *	    sound about 1/2 speed (24 KHz?) and
-				 *          binary 00 is slower still (22 KHz?)
-				 *
-				 * Setting this to 0x0000 is a good way to
-				 * kill all DMA at boot time so that the
-				 * PSC won't overwrite the kernel image
-				 * with sound data.
-				 */
-
-/*
- * 0x0202 - 0x0203 is unused. Writing there
- * seems to clobber the control register.
- */
-
-#define PSC_SND_SOURCE	0x204	/*
-				 * [ 32-bit ]
-				 * Controls input source and volume:
-				 *
-				 * bits 12-15 : input source volume, 0 - F
-				 * bits 16-19 : unknown, always 0x5
-				 * bits 20-23 : input source selection:
-				 *                  0x3 = CD Audio
-				 *                  0x4 = External Audio
-				 *
-				 * The volume is definitely not the general
-				 * output volume as it doesn't affect the
-				 * alert sound volume.
-				 */
-#define PSC_SND_STATUS1	0x208	/*
-				 * [ 32-bit ]
-				 * Appears to be a read-only status register.
-				 * The usual value is 0x00400002.
-				 */
-#define PSC_SND_HUH3	0x20C	/*
-				 * [ 16-bit ]
-				 * Unknown 16-bit value, always 0x0000.
-				 */
-#define PSC_SND_BITS2GO	0x20E	/*
-				 * [ 16-bit ]
-				 * Counts down to zero from some constant
-				 * value. The value appears to be the
-				 * number of _bits_ remaining before the
-				 * buffer is full, which would make sense
-				 * since Apple's docs say the sound DMA
-				 * channels are 1 bit wide.
-				 */
-#define PSC_SND_INADDR	0x210	/*
-				 * [ 32-bit ]
-				 * Address of the sound input DMA buffer
-				 */
-#define PSC_SND_OUTADDR	0x214	/*
-				 * [ 32-bit ]
-				 * Address of the sound output DMA buffer
-				 */
-#define PSC_SND_LEN	0x218	/*
-				 * [ 16-bit ]
-				 * Length of both buffers in eight-byte units.
-				 */
-#define PSC_SND_HUH4	0x21A	/*
-				 * [ 16-bit ]
-				 * Unknown, always 0x0000.
-				 */
-#define PSC_SND_STATUS2	0x21C	/*
-				 * [ 16-bit ]
-				 * Appears to e a read-only status register.
-				 * The usual value is 0x0200.
-				 */
-#define PSC_SND_HUH5	0x21E	/*
-				 * [ 16-bit ]
-				 * Unknown, always 0x0000.
-				 */
-
-#ifndef __ASSEMBLY__
-
-extern volatile __u8 *psc;
-extern int psc_present;
-
-extern void psc_register_interrupts(void);
-extern void psc_irq_enable(int);
-extern void psc_irq_disable(int);
-
-/*
- *	Access functions
- */
-
-static inline void psc_write_byte(int offset, __u8 data)
-{
-	*((volatile __u8 *)(psc + offset)) = data;
-}
-
-static inline void psc_write_word(int offset, __u16 data)
-{
-	*((volatile __u16 *)(psc + offset)) = data;
-}
-
-static inline void psc_write_long(int offset, __u32 data)
-{
-	*((volatile __u32 *)(psc + offset)) = data;
-}
-
-static inline u8 psc_read_byte(int offset)
-{
-	return *((volatile __u8 *)(psc + offset));
-}
-
-static inline u16 psc_read_word(int offset)
-{
-	return *((volatile __u16 *)(psc + offset));
-}
-
-static inline u32 psc_read_long(int offset)
-{
-	return *((volatile __u32 *)(psc + offset));
-}
-
-#endif /* __ASSEMBLY__ */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/mac_via.h b/ANDROID_3.4.5/arch/m68k/include/asm/mac_via.h
deleted file mode 100644
index aeeedf8b..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/mac_via.h
+++ /dev/null
@@ -1,276 +0,0 @@
-/*
- *	6522 Versatile Interface Adapter (VIA)
- *
- *	There are two of these on the Mac II. Some IRQ's are vectored
- *	via them as are assorted bits and bobs - eg rtc, adb. The picture
- *	is a bit incomplete as the Mac documentation doesn't cover this well
- */
-
-#ifndef _ASM_MAC_VIA_H_
-#define _ASM_MAC_VIA_H_
-
-/*
- * Base addresses for the VIAs. There are two in every machine,
- * although on some machines the second is an RBV or an OSS.
- * The OSS is different enough that it's handled separately.
- *
- * Do not use these values directly; use the via1 and via2 variables
- * instead (and don't forget to check rbv_present when using via2!)
- */
-
-#define VIA1_BASE	(0x50F00000)
-#define VIA2_BASE	(0x50F02000)
-#define  RBV_BASE	(0x50F26000)
-
-/*
- *	Not all of these are true post MacII I think.
- *      CSA: probably the ones CHRP marks as 'unused' change purposes
- *      when the IWM becomes the SWIM.
- *      http://www.rs6000.ibm.com/resource/technology/chrpio/via5.mak.html
- *      ftp://ftp.austin.ibm.com/pub/technology/spec/chrp/inwork/CHRP_IORef_1.0.pdf
- *
- * also, http://developer.apple.com/technotes/hw/hw_09.html claims the
- * following changes for IIfx:
- * VIA1A_vSccWrReq not available and that VIA1A_vSync has moved to an IOP.
- * Also, "All of the functionality of VIA2 has been moved to other chips".
- */
-
-#define VIA1A_vSccWrReq	0x80	/* SCC write. (input)
-				 * [CHRP] SCC WREQ: Reflects the state of the
-				 * Wait/Request pins from the SCC.
-				 * [Macintosh Family Hardware]
-				 * as CHRP on SE/30,II,IIx,IIcx,IIci.
-				 * on IIfx, "0 means an active request"
-				 */
-#define VIA1A_vRev8	0x40	/* Revision 8 board ???
-                                 * [CHRP] En WaitReqB: Lets the WaitReq_L
-				 * signal from port B of the SCC appear on
-				 * the PA7 input pin. Output.
-				 * [Macintosh Family] On the SE/30, this
-				 * is the bit to flip screen buffers.
-				 * 0=alternate, 1=main.
-				 * on II,IIx,IIcx,IIci,IIfx this is a bit
-				 * for Rev ID. 0=II,IIx, 1=IIcx,IIci,IIfx
-				 */
-#define VIA1A_vHeadSel	0x20	/* Head select for IWM.
-				 * [CHRP] unused.
-				 * [Macintosh Family] "Floppy disk
-				 * state-control line SEL" on all but IIfx
-				 */
-#define VIA1A_vOverlay	0x10    /* [Macintosh Family] On SE/30,II,IIx,IIcx
-				 * this bit enables the "Overlay" address
-				 * map in the address decoders as it is on
-				 * reset for mapping the ROM over the reset
-				 * vector. 1=use overlay map.
-				 * On the IIci,IIfx it is another bit of the
-				 * CPU ID: 0=normal IIci, 1=IIci with parity
-				 * feature or IIfx.
-				 * [CHRP] En WaitReqA: Lets the WaitReq_L
-				 * signal from port A of the SCC appear
-				 * on the PA7 input pin (CHRP). Output.
-				 * [MkLinux] "Drive Select"
-				 *  (with 0x20 being 'disk head select')
-				 */
-#define VIA1A_vSync	0x08    /* [CHRP] Sync Modem: modem clock select:
-                                 * 1: select the external serial clock to
-				 *    drive the SCC's /RTxCA pin.
-				 * 0: Select the 3.6864MHz clock to drive
-				 *    the SCC cell.
-				 * [Macintosh Family] Correct on all but IIfx
-				 */
-
-/* Macintosh Family Hardware sez: bits 0-2 of VIA1A are volume control
- * on Macs which had the PWM sound hardware.  Reserved on newer models.
- * On IIci,IIfx, bits 1-2 are the rest of the CPU ID:
- * bit 2: 1=IIci, 0=IIfx
- * bit 1: 1 on both IIci and IIfx.
- * MkLinux sez bit 0 is 'burnin flag' in this case.
- * CHRP sez: VIA1A bits 0-2 and 5 are 'unused': if programmed as
- * inputs, these bits will read 0.
- */
-#define VIA1A_vVolume	0x07	/* Audio volume mask for PWM */
-#define VIA1A_CPUID0	0x02	/* CPU id bit 0 on RBV, others */
-#define VIA1A_CPUID1	0x04	/* CPU id bit 0 on RBV, others */
-#define VIA1A_CPUID2	0x10	/* CPU id bit 0 on RBV, others */
-#define VIA1A_CPUID3	0x40	/* CPU id bit 0 on RBV, others */
-
-/* Info on VIA1B is from Macintosh Family Hardware & MkLinux.
- * CHRP offers no info. */
-#define VIA1B_vSound	0x80	/* Sound enable (for compatibility with
-				 * PWM hardware) 0=enabled.
-				 * Also, on IIci w/parity, shows parity error
-				 * 0=error, 1=OK. */
-#define VIA1B_vMystery	0x40    /* On IIci, parity enable. 0=enabled,1=disabled
-				 * On SE/30, vertical sync interrupt enable.
-				 * 0=enabled. This vSync interrupt shows up
-				 * as a slot $E interrupt. */
-#define VIA1B_vADBS2	0x20	/* ADB state input bit 1 (unused on IIfx) */
-#define VIA1B_vADBS1	0x10	/* ADB state input bit 0 (unused on IIfx) */
-#define VIA1B_vADBInt	0x08	/* ADB interrupt 0=interrupt (unused on IIfx)*/
-#define VIA1B_vRTCEnb	0x04	/* Enable Real time clock. 0=enabled. */
-#define VIA1B_vRTCClk	0x02    /* Real time clock serial-clock line. */
-#define VIA1B_vRTCData	0x01    /* Real time clock serial-data line. */
-
-/* MkLinux defines the following "VIA1 Register B contents where they
- * differ from standard VIA1".  From the naming scheme, we assume they
- * correspond to a VIA work-alike named 'EVR'. */
-#define	EVRB_XCVR	0x08	/* XCVR_SESSION* */
-#define	EVRB_FULL	0x10	/* VIA_FULL */
-#define	EVRB_SYSES	0x20	/* SYS_SESSION */
-#define	EVRB_AUXIE	0x00	/* Enable A/UX Interrupt Scheme */
-#define	EVRB_AUXID	0x40	/* Disable A/UX Interrupt Scheme */
-#define	EVRB_SFTWRIE	0x00	/* Software Interrupt ReQuest */
-#define	EVRB_SFTWRID	0x80	/* Software Interrupt ReQuest */
-
-/*
- *	VIA2 A register is the interrupt lines raised off the nubus
- *	slots.
- *      The below info is from 'Macintosh Family Hardware.'
- *      MkLinux calls the 'IIci internal video IRQ' below the 'RBV slot 0 irq.'
- *      It also notes that the slot $9 IRQ is the 'Ethernet IRQ' and
- *      defines the 'Video IRQ' as 0x40 for the 'EVR' VIA work-alike.
- *      Perhaps OSS uses vRAM1 and vRAM2 for ADB.
- */
-
-#define VIA2A_vRAM1	0x80	/* RAM size bit 1 (IIci: reserved) */
-#define VIA2A_vRAM0	0x40	/* RAM size bit 0 (IIci: internal video IRQ) */
-#define VIA2A_vIRQE	0x20	/* IRQ from slot $E */
-#define VIA2A_vIRQD	0x10	/* IRQ from slot $D */
-#define VIA2A_vIRQC	0x08	/* IRQ from slot $C */
-#define VIA2A_vIRQB	0x04	/* IRQ from slot $B */
-#define VIA2A_vIRQA	0x02	/* IRQ from slot $A */
-#define VIA2A_vIRQ9	0x01	/* IRQ from slot $9 */
-
-/* RAM size bits decoded as follows:
- * bit1 bit0  size of ICs in bank A
- *  0    0    256 kbit
- *  0    1    1 Mbit
- *  1    0    4 Mbit
- *  1    1   16 Mbit
- */
-
-/*
- *	Register B has the fun stuff in it
- */
-
-#define VIA2B_vVBL	0x80	/* VBL output to VIA1 (60.15Hz) driven by
-				 * timer T1.
-				 * on IIci, parity test: 0=test mode.
-				 * [MkLinux] RBV_PARODD: 1=odd,0=even. */
-#define VIA2B_vSndJck	0x40	/* External sound jack status.
-				 * 0=plug is inserted.  On SE/30, always 0 */
-#define VIA2B_vTfr0	0x20	/* Transfer mode bit 0 ack from NuBus */
-#define VIA2B_vTfr1	0x10	/* Transfer mode bit 1 ack from NuBus */
-#define VIA2B_vMode32	0x08	/* 24/32bit switch - doubles as cache flush
-				 * on II, AMU/PMMU control.
-				 *   if AMU, 0=24bit to 32bit translation
-				 *   if PMMU, 1=PMMU is accessing page table.
-				 * on SE/30 tied low.
-				 * on IIx,IIcx,IIfx, unused.
-				 * on IIci/RBV, cache control. 0=flush cache.
-				 */
-#define VIA2B_vPower	0x04	/* Power off, 0=shut off power.
-				 * on SE/30 this signal sent to PDS card. */
-#define VIA2B_vBusLk	0x02	/* Lock NuBus transactions, 0=locked.
-				 * on SE/30 sent to PDS card. */
-#define VIA2B_vCDis	0x01	/* Cache control. On IIci, 1=disable cache card
-				 * on others, 0=disable processor's instruction
-				 * and data caches. */
-
-/* Apple sez: http://developer.apple.com/technotes/ov/ov_04.html
- * Another example of a valid function that has no ROM support is the use
- * of the alternate video page for page-flipping animation. Since there
- * is no ROM call to flip pages, it is necessary to go play with the
- * right bit in the VIA chip (6522 Versatile Interface Adapter).
- * [CSA: don't know which one this is, but it's one of 'em!]
- */
-
-/*
- *	6522 registers - see databook.
- * CSA: Assignments for VIA1 confirmed from CHRP spec.
- */
-
-/* partial address decode.  0xYYXX : XX part for RBV, YY part for VIA */
-/* Note: 15 VIA regs, 8 RBV regs */
-
-#define vBufB	0x0000	/* [VIA/RBV]  Register B */
-#define vBufAH	0x0200  /* [VIA only] Buffer A, with handshake. DON'T USE! */
-#define vDirB	0x0400  /* [VIA only] Data Direction Register B. */
-#define vDirA	0x0600  /* [VIA only] Data Direction Register A. */
-#define vT1CL	0x0800  /* [VIA only] Timer one counter low. */
-#define vT1CH	0x0a00  /* [VIA only] Timer one counter high. */
-#define vT1LL	0x0c00  /* [VIA only] Timer one latches low. */
-#define vT1LH	0x0e00  /* [VIA only] Timer one latches high. */
-#define vT2CL	0x1000  /* [VIA only] Timer two counter low. */
-#define vT2CH	0x1200  /* [VIA only] Timer two counter high. */
-#define vSR	0x1400  /* [VIA only] Shift register. */
-#define vACR	0x1600  /* [VIA only] Auxiliary control register. */
-#define vPCR	0x1800  /* [VIA only] Peripheral control register. */
-                        /*            CHRP sez never ever to *write* this.
-			 *            Mac family says never to *change* this.
-			 * In fact we need to initialize it once at start. */
-#define vIFR	0x1a00  /* [VIA/RBV]  Interrupt flag register. */
-#define vIER	0x1c00  /* [VIA/RBV]  Interrupt enable register. */
-#define vBufA	0x1e00  /* [VIA/RBV] register A (no handshake) */
-
-/* The RBV only decodes the bottom eight address lines; the VIA doesn't
- * decode the bottom eight -- so vBufB | rBufB will always get you BufB */
-/* CSA: in fact, only bits 0,1, and 4 seem to be decoded.
- * BUT note the values for rIER and rIFR, where the top 8 bits *do* seem
- * to matter.  In fact *all* of the top 8 bits seem to matter;
- * setting rIER=0x1813 and rIFR=0x1803 doesn't work, either.
- * Perhaps some sort of 'compatibility mode' is built-in? [21-May-1999]
- */
-
-#define rBufB   0x0000  /* [VIA/RBV]  Register B */
-#define rExp	0x0001	/* [RBV only] RBV future expansion (always 0) */
-#define rSIFR	0x0002  /* [RBV only] RBV slot interrupts register. */
-#define rIFR	0x1a03  /* [VIA/RBV]  RBV interrupt flag register. */
-#define rMonP   0x0010  /* [RBV only] RBV video monitor type. */
-#define rChpT   0x0011  /* [RBV only] RBV test mode register (reads as 0). */
-#define rSIER   0x0012  /* [RBV only] RBV slot interrupt enables. */
-#define rIER    0x1c13  /* [VIA/RBV]  RBV interrupt flag enable register. */
-#define rBufA	rSIFR   /* the 'slot interrupts register' is BufA on a VIA */
-
-/*
- * Video monitor parameters, for rMonP:
- */
-#define RBV_DEPTH  0x07	/* bits per pixel: 000=1,001=2,010=4,011=8 */
-#define RBV_MONID  0x38	/* monitor type, as below. */
-#define RBV_VIDOFF 0x40	/* 1 turns off onboard video */
-/* Supported monitor types: */
-#define MON_15BW   (1<<3) /* 15" BW portrait. */
-#define MON_IIGS   (2<<3) /* 12" color (modified IIGS monitor). */
-#define MON_15RGB  (5<<3) /* 15" RGB portrait. */
-#define MON_12OR13 (6<<3) /* 12" BW or 13" RGB. */
-#define MON_NONE   (7<<3) /* No monitor attached. */
-
-/* To clarify IER manipulations */
-#define IER_SET_BIT(b) (0x80 | (1<<(b)) )
-#define IER_CLR_BIT(b) (0x7F & (1<<(b)) )
-
-#ifndef __ASSEMBLY__
-
-extern volatile __u8 *via1,*via2;
-extern int rbv_present,via_alt_mapping;
-
-extern void via_register_interrupts(void);
-extern void via_irq_enable(int);
-extern void via_irq_disable(int);
-extern void via_nubus_irq_startup(int irq);
-extern void via_nubus_irq_shutdown(int irq);
-extern void via1_irq(unsigned int irq, struct irq_desc *desc);
-extern void via1_set_head(int);
-extern int via2_scsi_drq_pending(void);
-
-static inline int rbv_set_video_bpp(int bpp)
-{
-	char val = (bpp==1)?0:(bpp==2)?1:(bpp==4)?2:(bpp==8)?3:-1;
-	if (!rbv_present || val<0) return -1;
-	via2[rMonP] = (via2[rMonP] & ~RBV_DEPTH) | val;
-	return 0;
-}
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* _ASM_MAC_VIA_H_ */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/machdep.h b/ANDROID_3.4.5/arch/m68k/include/asm/machdep.h
deleted file mode 100644
index 825c1c81..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/machdep.h
+++ /dev/null
@@ -1,41 +0,0 @@
-#ifndef _M68K_MACHDEP_H
-#define _M68K_MACHDEP_H
-
-#include <linux/seq_file.h>
-#include <linux/interrupt.h>
-
-struct pt_regs;
-struct mktime;
-struct rtc_time;
-struct rtc_pll_info;
-struct buffer_head;
-
-extern void (*mach_sched_init) (irq_handler_t handler);
-/* machine dependent irq functions */
-extern void (*mach_init_IRQ) (void);
-extern void (*mach_get_model) (char *model);
-extern void (*mach_get_hardware_list) (struct seq_file *m);
-/* machine dependent timer functions */
-extern unsigned long (*mach_gettimeoffset)(void);
-extern int (*mach_hwclk)(int, struct rtc_time*);
-extern unsigned int (*mach_get_ss)(void);
-extern int (*mach_get_rtc_pll)(struct rtc_pll_info *);
-extern int (*mach_set_rtc_pll)(struct rtc_pll_info *);
-extern int (*mach_set_clock_mmss)(unsigned long);
-extern void (*mach_reset)( void );
-extern void (*mach_halt)( void );
-extern void (*mach_power_off)( void );
-extern unsigned long (*mach_hd_init) (unsigned long, unsigned long);
-extern void (*mach_hd_setup)(char *, int *);
-extern long mach_max_dma_address;
-extern void (*mach_heartbeat) (int);
-extern void (*mach_l2_flush) (int);
-extern void (*mach_beep) (unsigned int, unsigned int);
-
-/* Hardware clock functions */
-extern void hw_timer_init(irq_handler_t handler);
-extern unsigned long hw_timer_offset(void);
-
-extern void config_BSP(char *command, int len);
-
-#endif /* _M68K_MACHDEP_H */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/machines.h b/ANDROID_3.4.5/arch/m68k/include/asm/machines.h
deleted file mode 100644
index be667e84..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/machines.h
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
- * machines.h:  Defines for taking apart the machine type value in the
- *              idprom and determining the kind of machine we are on.
- *
- * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
- * Sun3/3x models added by David Monro (davidm@psrg.cs.usyd.edu.au)
- */
-#ifndef _SPARC_MACHINES_H
-#define _SPARC_MACHINES_H
-
-struct Sun_Machine_Models {
-	char *name;
-	unsigned char id_machtype;
-};
-
-/* Current number of machines we know about that has an IDPROM
- * machtype entry including one entry for the 0x80 OBP machines.
- */
-// reduced along with table in arch/m68k/sun3/idprom.c
-// sun3 port doesn't need to know about sparc machines.
-//#define NUM_SUN_MACHINES   23
-#define NUM_SUN_MACHINES  8
-
-/* The machine type in the idprom area looks like this:
- *
- * ---------------
- * | ARCH | MACH |
- * ---------------
- *  7    4 3    0
- *
- * The ARCH field determines the architecture line (sun4, sun4c, etc).
- * The MACH field determines the machine make within that architecture.
- */
-
-#define SM_ARCH_MASK  0xf0
-#define SM_SUN3       0x10
-#define SM_SUN4       0x20
-#define SM_SUN3X      0x40
-#define SM_SUN4C      0x50
-#define SM_SUN4M      0x70
-#define SM_SUN4M_OBP  0x80
-
-#define SM_TYP_MASK   0x0f
-/* Sun3 machines */
-#define SM_3_160      0x01    /* Sun 3/160 series */
-#define SM_3_50       0x02    /* Sun 3/50 series */
-#define SM_3_260      0x03    /* Sun 3/260 series */
-#define SM_3_110      0x04    /* Sun 3/110 series */
-#define SM_3_60       0x07    /* Sun 3/60 series */
-#define SM_3_E        0x08    /* Sun 3/E series */
-
-/* Sun3x machines */
-#define SM_3_460      0x01    /* Sun 3/460 (460,470,480) series */
-#define SM_3_80       0x02    /* Sun 3/80 series */
-
-/* Sun4 machines */
-#define SM_4_260      0x01    /* Sun 4/200 series */
-#define SM_4_110      0x02    /* Sun 4/100 series */
-#define SM_4_330      0x03    /* Sun 4/300 series */
-#define SM_4_470      0x04    /* Sun 4/400 series */
-
-/* Sun4c machines                Full Name              - PROM NAME */
-#define SM_4C_SS1     0x01    /* Sun4c SparcStation 1   - Sun 4/60  */
-#define SM_4C_IPC     0x02    /* Sun4c SparcStation IPC - Sun 4/40  */
-#define SM_4C_SS1PLUS 0x03    /* Sun4c SparcStation 1+  - Sun 4/65  */
-#define SM_4C_SLC     0x04    /* Sun4c SparcStation SLC - Sun 4/20  */
-#define SM_4C_SS2     0x05    /* Sun4c SparcStation 2   - Sun 4/75  */
-#define SM_4C_ELC     0x06    /* Sun4c SparcStation ELC - Sun 4/25  */
-#define SM_4C_IPX     0x07    /* Sun4c SparcStation IPX - Sun 4/50  */
-
-/* Sun4m machines, these predate the OpenBoot.  These values only mean
- * something if the value in the ARCH field is SM_SUN4M, if it is
- * SM_SUN4M_OBP then you have the following situation:
- * 1) You either have a sun4d, a sun4e, or a recently made sun4m.
- * 2) You have to consult OpenBoot to determine which machine this is.
- */
-#define SM_4M_SS60    0x01    /* Sun4m SparcSystem 600                  */
-#define SM_4M_SS50    0x02    /* Sun4m SparcStation 10                  */
-#define SM_4M_SS40    0x03    /* Sun4m SparcStation 5                   */
-
-/* Sun4d machines -- N/A */
-/* Sun4e machines -- N/A */
-/* Sun4u machines -- N/A */
-
-#endif /* !(_SPARC_MACHINES_H) */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/machw.h b/ANDROID_3.4.5/arch/m68k/include/asm/machw.h
deleted file mode 100644
index a2209516..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/machw.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
-** linux/machw.h -- This header defines some macros and pointers for
-**                    the various Macintosh custom hardware registers.
-**
-** Copyright 1997 by Michael Schmitz
-**
-** This file is subject to the terms and conditions of the GNU General Public
-** License.  See the file COPYING in the main directory of this archive
-** for more details.
-**
-*/
-
-#ifndef _ASM_MACHW_H_
-#define _ASM_MACHW_H_
-
-/*
- * head.S maps the videomem to VIDEOMEMBASE
- */
-
-#define VIDEOMEMBASE	0xf0000000
-#define VIDEOMEMSIZE	(4096*1024)
-#define VIDEOMEMMASK	(-4096*1024)
-
-#endif /* linux/machw.h */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/macintosh.h b/ANDROID_3.4.5/arch/m68k/include/asm/macintosh.h
deleted file mode 100644
index 682a1a2f..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/macintosh.h
+++ /dev/null
@@ -1,138 +0,0 @@
-#ifndef __ASM_MACINTOSH_H
-#define __ASM_MACINTOSH_H
-
-#include <linux/seq_file.h>
-#include <linux/interrupt.h>
-
-/*
- *	Apple Macintoshisms
- */
-
-extern void mac_reset(void);
-extern void mac_poweroff(void);
-extern void mac_init_IRQ(void);
-
-extern void mac_irq_enable(struct irq_data *data);
-extern void mac_irq_disable(struct irq_data *data);
-
-/*
- *	Macintosh Table
- */
-
-struct mac_model
-{
-	short ident;
-	char *name;
-	char adb_type;
-	char via_type;
-	char scsi_type;
-	char ide_type;
-	char scc_type;
-	char ether_type;
-	char nubus_type;
-	char floppy_type;
-};
-
-#define MAC_ADB_NONE		0
-#define MAC_ADB_II		1
-#define MAC_ADB_IISI		2
-#define MAC_ADB_CUDA		3
-#define MAC_ADB_PB1		4
-#define MAC_ADB_PB2		5
-#define MAC_ADB_IOP		6
-
-#define MAC_VIA_II		1
-#define MAC_VIA_IICI		2
-#define MAC_VIA_QUADRA		3
-
-#define MAC_SCSI_NONE		0
-#define MAC_SCSI_OLD		1
-#define MAC_SCSI_QUADRA		2
-#define MAC_SCSI_QUADRA2	3
-#define MAC_SCSI_QUADRA3	4
-
-#define MAC_IDE_NONE		0
-#define MAC_IDE_QUADRA		1
-#define MAC_IDE_PB		2
-#define MAC_IDE_BABOON		3
-
-#define MAC_SCC_II		1
-#define MAC_SCC_IOP		2
-#define MAC_SCC_QUADRA		3
-#define MAC_SCC_PSC		4
-
-#define MAC_ETHER_NONE		0
-#define MAC_ETHER_SONIC		1
-#define MAC_ETHER_MACE		2
-
-#define MAC_NO_NUBUS		0
-#define MAC_NUBUS		1
-
-#define MAC_FLOPPY_IWM		0
-#define MAC_FLOPPY_SWIM_ADDR1	1
-#define MAC_FLOPPY_SWIM_ADDR2	2
-#define MAC_FLOPPY_SWIM_IOP	3
-#define MAC_FLOPPY_AV		4
-
-/*
- *	Gestalt numbers
- */
-
-#define MAC_MODEL_II		6
-#define MAC_MODEL_IIX		7
-#define MAC_MODEL_IICX		8
-#define MAC_MODEL_SE30		9
-#define MAC_MODEL_IICI		11
-#define MAC_MODEL_IIFX		13	/* And well numbered it is too */
-#define MAC_MODEL_IISI		18
-#define MAC_MODEL_LC		19
-#define MAC_MODEL_Q900		20
-#define MAC_MODEL_PB170		21
-#define MAC_MODEL_Q700		22
-#define MAC_MODEL_CLII		23	/* aka: P200 */
-#define MAC_MODEL_PB140		25
-#define MAC_MODEL_Q950		26	/* aka: WGS95 */
-#define MAC_MODEL_LCIII		27	/* aka: P450 */
-#define MAC_MODEL_PB210		29
-#define MAC_MODEL_C650		30
-#define MAC_MODEL_PB230		32
-#define MAC_MODEL_PB180		33
-#define MAC_MODEL_PB160		34
-#define MAC_MODEL_Q800		35	/* aka: WGS80 */
-#define MAC_MODEL_Q650		36
-#define MAC_MODEL_LCII		37	/* aka: P400/405/410/430 */
-#define MAC_MODEL_PB250		38
-#define MAC_MODEL_IIVI		44
-#define MAC_MODEL_P600		45	/* aka: P600CD */
-#define MAC_MODEL_IIVX		48
-#define MAC_MODEL_CCL		49	/* aka: P250 */
-#define MAC_MODEL_PB165C	50
-#define MAC_MODEL_C610		52	/* aka: WGS60 */
-#define MAC_MODEL_Q610		53
-#define MAC_MODEL_PB145		54	/* aka: PB145B */
-#define MAC_MODEL_P520		56	/* aka: LC520 */
-#define MAC_MODEL_C660		60
-#define MAC_MODEL_P460		62	/* aka: LCIII+, P466/P467 */
-#define MAC_MODEL_PB180C	71
-#define MAC_MODEL_PB520		72	/* aka: PB520C, PB540, PB540C, PB550C */
-#define MAC_MODEL_PB270C	77
-#define MAC_MODEL_Q840		78
-#define MAC_MODEL_P550		80	/* aka: LC550, P560 */
-#define MAC_MODEL_CCLII		83	/* aka: P275 */
-#define MAC_MODEL_PB165		84
-#define MAC_MODEL_PB190		85	/* aka: PB190CS */
-#define MAC_MODEL_TV		88
-#define MAC_MODEL_P475		89	/* aka: LC475, P476 */
-#define MAC_MODEL_P475F		90	/* aka: P475 w/ FPU (no LC040) */
-#define MAC_MODEL_P575		92	/* aka: LC575, P577/P578 */
-#define MAC_MODEL_Q605		94
-#define MAC_MODEL_Q605_ACC	95	/* Q605 accelerated to 33 MHz */
-#define MAC_MODEL_Q630		98	/* aka: LC630, P630/631/635/636/637/638/640 */
-#define MAC_MODEL_P588		99	/* aka: LC580, P580 */
-#define MAC_MODEL_PB280		102
-#define MAC_MODEL_PB280C	103
-#define MAC_MODEL_PB150		115
-
-extern struct mac_model *macintosh_config;
-
-#endif
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/macints.h b/ANDROID_3.4.5/arch/m68k/include/asm/macints.h
deleted file mode 100644
index 92aa8a4c..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/macints.h
+++ /dev/null
@@ -1,143 +0,0 @@
-/*
-** macints.h -- Macintosh Linux interrupt handling structs and prototypes
-**
-** Copyright 1997 by Michael Schmitz
-**
-** This file is subject to the terms and conditions of the GNU General Public
-** License.  See the file COPYING in the main directory of this archive
-** for more details.
-**
-*/
-
-#ifndef _ASM_MACINTS_H_
-#define _ASM_MACINTS_H_
-
-#include <asm/irq.h>
-
-/* Setting this prints debugging info for unclaimed interrupts */
-
-#define DEBUG_SPURIOUS
-
-/* Setting this prints debugging info on each autovector interrupt */
-
-/* #define DEBUG_IRQS */
-
-/* Setting this prints debugging info on each Nubus interrupt */
-
-/* #define DEBUG_NUBUS_INT */
-
-/* Setting this prints debugging info on irqs as they enabled and disabled. */
-
-/* #define DEBUG_IRQUSE */
-
-/*
- * Base IRQ number for all Mac68K interrupt sources. Each source
- * has eight indexes (base -> base+7).
- */
-
-#define VIA1_SOURCE_BASE	8
-#define VIA2_SOURCE_BASE	16
-#define PSC3_SOURCE_BASE	24
-#define PSC4_SOURCE_BASE	32
-#define PSC5_SOURCE_BASE	40
-#define PSC6_SOURCE_BASE	48
-#define NUBUS_SOURCE_BASE	56
-#define BABOON_SOURCE_BASE	64
-
-/*
- * Maximum IRQ number is BABOON_SOURCE_BASE + 7,
- * giving us IRQs up through 71
- */
-
-#define NUM_MAC_SOURCES		72
-
-/*
- * clean way to separate IRQ into its source and index
- */
-
-#define IRQ_SRC(irq)	(irq >> 3)
-#define	IRQ_IDX(irq)	(irq & 7)
-
-/* VIA1 interrupts */
-#define IRQ_VIA1_0	  (8)		/* one second int. */
-#define IRQ_VIA1_1        (9)		/* VBlank int. */
-#define IRQ_MAC_VBL	  IRQ_VIA1_1
-#define IRQ_VIA1_2	  (10)		/* ADB SR shifts complete */
-#define IRQ_MAC_ADB	  IRQ_VIA1_2
-#define IRQ_MAC_ADB_SR	  IRQ_VIA1_2
-#define IRQ_VIA1_3	  (11)		/* ADB SR CB2 ?? */
-#define IRQ_MAC_ADB_SD	  IRQ_VIA1_3
-#define IRQ_VIA1_4        (12)		/* ADB SR ext. clock pulse */
-#define IRQ_MAC_ADB_CL	  IRQ_VIA1_4
-#define IRQ_VIA1_5	  (13)
-#define IRQ_MAC_TIMER_2	  IRQ_VIA1_5
-#define IRQ_VIA1_6	  (14)
-#define IRQ_MAC_TIMER_1	  IRQ_VIA1_6
-#define IRQ_VIA1_7        (15)
-
-/* VIA2/RBV interrupts */
-#define IRQ_VIA2_0	  (16)
-#define IRQ_MAC_SCSIDRQ	  IRQ_VIA2_0
-#define IRQ_VIA2_1        (17)
-#define IRQ_MAC_NUBUS	  IRQ_VIA2_1
-#define IRQ_VIA2_2	  (18)
-#define IRQ_VIA2_3	  (19)
-#define IRQ_MAC_SCSI	  IRQ_VIA2_3
-#define IRQ_VIA2_4        (20)
-#define IRQ_VIA2_5	  (21)
-#define IRQ_VIA2_6	  (22)
-#define IRQ_VIA2_7        (23)
-
-/* Level 3 (PSC, AV Macs only) interrupts */
-#define IRQ_PSC3_0	  (24)
-#define IRQ_MAC_MACE	  IRQ_PSC3_0
-#define IRQ_PSC3_1	  (25)
-#define IRQ_PSC3_2	  (26)
-#define IRQ_PSC3_3	  (27)
-
-/* Level 4 (PSC, AV Macs only) interrupts */
-#define IRQ_PSC4_0	  (32)
-#define IRQ_PSC4_1	  (33)
-#define IRQ_MAC_SCC_A	  IRQ_PSC4_1
-#define IRQ_PSC4_2	  (34)
-#define IRQ_MAC_SCC_B	  IRQ_PSC4_2
-#define IRQ_PSC4_3	  (35)
-#define IRQ_MAC_MACE_DMA  IRQ_PSC4_3
-
-/* OSS Level 4 interrupts */
-#define IRQ_MAC_SCC	  (33)
-
-/* Level 5 (PSC, AV Macs only) interrupts */
-#define IRQ_PSC5_0	  (40)
-#define IRQ_PSC5_1	  (41)
-#define IRQ_PSC5_2	  (42)
-#define IRQ_PSC5_3	  (43)
-
-/* Level 6 (PSC, AV Macs only) interrupts */
-#define IRQ_PSC6_0	  (48)
-#define IRQ_PSC6_1	  (49)
-#define IRQ_PSC6_2	  (50)
-#define IRQ_PSC6_3	  (51)
-
-/* Nubus interrupts (cascaded to VIA2) */
-#define IRQ_NUBUS_9	  (56)
-#define IRQ_NUBUS_A	  (57)
-#define IRQ_NUBUS_B	  (58)
-#define IRQ_NUBUS_C	  (59)
-#define IRQ_NUBUS_D	  (60)
-#define IRQ_NUBUS_E	  (61)
-#define IRQ_NUBUS_F	  (62)
-
-/* Baboon interrupts (cascaded to nubus slot $C) */
-#define IRQ_BABOON_0	  (64)
-#define IRQ_BABOON_1	  (65)
-#define IRQ_BABOON_2	  (66)
-#define IRQ_BABOON_3	  (67)
-
-#define SLOT2IRQ(x)	  (x + 47)
-#define IRQ2SLOT(x)	  (x - 47)
-
-#define INT_CLK   24576	    /* CLK while int_clk =2.456MHz and divide = 100 */
-#define INT_TICKS 246	    /* to make sched_time = 99.902... HZ */
-
-#endif /* asm/macints.h */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/math-emu.h b/ANDROID_3.4.5/arch/m68k/include/asm/math-emu.h
deleted file mode 100644
index 5e9249b0..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/math-emu.h
+++ /dev/null
@@ -1,315 +0,0 @@
-#ifndef _ASM_M68K_SETUP_H
-#define _ASM_M68K_SETUP_H
-
-#include <asm/setup.h>
-#include <linux/linkage.h>
-
-/* Status Register bits */
-
-/* accrued exception bits */
-#define FPSR_AEXC_INEX	3
-#define FPSR_AEXC_DZ	4
-#define FPSR_AEXC_UNFL	5
-#define FPSR_AEXC_OVFL	6
-#define FPSR_AEXC_IOP	7
-
-/* exception status bits */
-#define FPSR_EXC_INEX1	8
-#define FPSR_EXC_INEX2	9
-#define FPSR_EXC_DZ	10
-#define FPSR_EXC_UNFL	11
-#define FPSR_EXC_OVFL	12
-#define FPSR_EXC_OPERR	13
-#define FPSR_EXC_SNAN	14
-#define FPSR_EXC_BSUN	15
-
-/* quotient byte, assumes big-endian, of course */
-#define FPSR_QUOTIENT(fpsr) (*((signed char *) &(fpsr) + 1))
-
-/* condition code bits */
-#define FPSR_CC_NAN	24
-#define FPSR_CC_INF	25
-#define FPSR_CC_Z	26
-#define FPSR_CC_NEG	27
-
-
-/* Control register bits */
-
-/* rounding mode */
-#define	FPCR_ROUND_RN	0		/* round to nearest/even */
-#define FPCR_ROUND_RZ	1		/* round to zero */
-#define FPCR_ROUND_RM	2		/* minus infinity */
-#define FPCR_ROUND_RP	3		/* plus infinity */
-
-/* rounding precision */
-#define FPCR_PRECISION_X	0	/* long double */
-#define FPCR_PRECISION_S	1	/* double */
-#define FPCR_PRECISION_D	2	/* float */
-
-
-/* Flags to select the debugging output */
-#define PDECODE		0
-#define PEXECUTE	1
-#define PCONV		2
-#define PNORM		3
-#define PREGISTER	4
-#define PINSTR		5
-#define PUNIMPL		6
-#define PMOVEM		7
-
-#define PMDECODE	(1<<PDECODE)
-#define PMEXECUTE	(1<<PEXECUTE)
-#define PMCONV		(1<<PCONV)
-#define PMNORM		(1<<PNORM)
-#define PMREGISTER	(1<<PREGISTER)
-#define PMINSTR		(1<<PINSTR)
-#define PMUNIMPL	(1<<PUNIMPL)
-#define PMMOVEM		(1<<PMOVEM)
-
-#ifndef __ASSEMBLY__
-
-#include <linux/kernel.h>
-#include <linux/sched.h>
-
-union fp_mant64 {
-	unsigned long long m64;
-	unsigned long m32[2];
-};
-
-union fp_mant128 {
-	unsigned long long m64[2];
-	unsigned long m32[4];
-};
-
-/* internal representation of extended fp numbers */
-struct fp_ext {
-	unsigned char lowmant;
-	unsigned char sign;
-	unsigned short exp;
-	union fp_mant64 mant;
-};
-
-/* C representation of FPU registers */
-/* NOTE: if you change this, you have to change the assembler offsets
-   below and the size in <asm/fpu.h>, too */
-struct fp_data {
-	struct fp_ext fpreg[8];
-	unsigned int fpcr;
-	unsigned int fpsr;
-	unsigned int fpiar;
-	unsigned short prec;
-	unsigned short rnd;
-	struct fp_ext temp[2];
-};
-
-#ifdef FPU_EMU_DEBUG
-extern unsigned int fp_debugprint;
-
-#define dprint(bit, fmt, args...) ({			\
-	if (fp_debugprint & (1 << (bit)))		\
-		printk(fmt, ## args);			\
-})
-#else
-#define dprint(bit, fmt, args...)
-#endif
-
-#define uprint(str) ({					\
-	static int __count = 3;				\
-							\
-	if (__count > 0) {				\
-		printk("You just hit an unimplemented "	\
-		       "fpu instruction (%s)\n", str);	\
-		printk("Please report this to ....\n");	\
-		__count--;				\
-	}						\
-})
-
-#define FPDATA		((struct fp_data *)current->thread.fp)
-
-#else	/* __ASSEMBLY__ */
-
-#define FPDATA		%a2
-
-/* offsets from the base register to the floating point data in the task struct */
-#define FPD_FPREG	(TASK_THREAD+THREAD_FPREG+0)
-#define FPD_FPCR	(TASK_THREAD+THREAD_FPREG+96)
-#define FPD_FPSR	(TASK_THREAD+THREAD_FPREG+100)
-#define FPD_FPIAR	(TASK_THREAD+THREAD_FPREG+104)
-#define FPD_PREC	(TASK_THREAD+THREAD_FPREG+108)
-#define FPD_RND		(TASK_THREAD+THREAD_FPREG+110)
-#define FPD_TEMPFP1	(TASK_THREAD+THREAD_FPREG+112)
-#define FPD_TEMPFP2	(TASK_THREAD+THREAD_FPREG+124)
-#define FPD_SIZEOF	(TASK_THREAD+THREAD_FPREG+136)
-
-/* offsets on the stack to access saved registers,
- * these are only used during instruction decoding
- * where we always know how deep we're on the stack.
- */
-#define FPS_DO		(PT_OFF_D0)
-#define FPS_D1		(PT_OFF_D1)
-#define FPS_D2		(PT_OFF_D2)
-#define FPS_A0		(PT_OFF_A0)
-#define FPS_A1		(PT_OFF_A1)
-#define FPS_A2		(PT_OFF_A2)
-#define FPS_SR		(PT_OFF_SR)
-#define FPS_PC		(PT_OFF_PC)
-#define FPS_EA		(PT_OFF_PC+6)
-#define FPS_PC2		(PT_OFF_PC+10)
-
-.macro	fp_get_fp_reg
-	lea	(FPD_FPREG,FPDATA,%d0.w*4),%a0
-	lea	(%a0,%d0.w*8),%a0
-.endm
-
-/* Macros used to get/put the current program counter.
- * 020/030 use a different stack frame then 040/060, for the
- * 040/060 the return pc points already to the next location,
- * so this only needs to be modified for jump instructions.
- */
-.macro	fp_get_pc dest
-	move.l	(FPS_PC+4,%sp),\dest
-.endm
-
-.macro	fp_put_pc src,jump=0
-	move.l	\src,(FPS_PC+4,%sp)
-.endm
-
-.macro	fp_get_instr_data	f,s,dest,label
-	getuser	\f,%sp@(FPS_PC+4)@(0),\dest,\label,%sp@(FPS_PC+4)
-	addq.l	#\s,%sp@(FPS_PC+4)
-.endm
-
-.macro	fp_get_instr_word	dest,label,addr
-	fp_get_instr_data	w,2,\dest,\label,\addr
-.endm
-
-.macro	fp_get_instr_long	dest,label,addr
-	fp_get_instr_data	l,4,\dest,\label,\addr
-.endm
-
-/* These macros are used to read from/write to user space
- * on error we jump to the fixup section, load the fault
- * address into %a0 and jump to the exit.
- * (derived from <asm/uaccess.h>)
- */
-.macro	getuser	size,src,dest,label,addr
-|	printf	,"[\size<%08x]",1,\addr
-.Lu1\@:	moves\size	\src,\dest
-
-	.section .fixup,"ax"
-	.even
-.Lu2\@:	move.l	\addr,%a0
-	jra	\label
-	.previous
-
-	.section __ex_table,"a"
-	.align	4
-	.long	.Lu1\@,.Lu2\@
-	.previous
-.endm
-
-.macro	putuser	size,src,dest,label,addr
-|	printf	,"[\size>%08x]",1,\addr
-.Lu1\@:	moves\size	\src,\dest
-.Lu2\@:
-
-	.section .fixup,"ax"
-	.even
-.Lu3\@:	move.l	\addr,%a0
-	jra	\label
-	.previous
-
-	.section __ex_table,"a"
-	.align	4
-	.long	.Lu1\@,.Lu3\@
-	.long	.Lu2\@,.Lu3\@
-	.previous
-.endm
-
-/* work around binutils idiocy */
-old_gas=-1
-.irp    gas_ident.x .x
-old_gas=old_gas+1
-.endr
-.if !old_gas
-.irp	m b,w,l
-.macro	getuser.\m src,dest,label,addr
-	getuser .\m,\src,\dest,\label,\addr
-.endm
-.macro	putuser.\m src,dest,label,addr
-	putuser .\m,\src,\dest,\label,\addr
-.endm
-.endr
-.endif
-
-.macro	movestack	nr,arg1,arg2,arg3,arg4,arg5
-	.if	\nr
-	movestack	(\nr-1),\arg2,\arg3,\arg4,\arg5
-	move.l	\arg1,-(%sp)
-	.endif
-.endm
-
-.macro	printf	bit=-1,string,nr=0,arg1,arg2,arg3,arg4,arg5
-#ifdef FPU_EMU_DEBUG
-	.data
-.Lpdata\@:
-	.string	"\string"
-	.previous
-
-	movem.l	%d0/%d1/%a0/%a1,-(%sp)
-	.if	\bit+1
-#if 0
-	moveq	#\bit,%d0
-	andw	#7,%d0
-	btst	%d0,fp_debugprint+((31-\bit)/8)
-#else
-	btst	#\bit,fp_debugprint+((31-\bit)/8)
-#endif
-	jeq	.Lpskip\@
-	.endif
-	movestack	\nr,\arg1,\arg2,\arg3,\arg4,\arg5
-	pea	.Lpdata\@
-	jsr	printk
-	lea	((\nr+1)*4,%sp),%sp
-.Lpskip\@:
-	movem.l	(%sp)+,%d0/%d1/%a0/%a1
-#endif
-.endm
-
-.macro	printx	bit,fp
-#ifdef FPU_EMU_DEBUG
-	movem.l	%d0/%a0,-(%sp)
-	lea	\fp,%a0
-#if 0
-	moveq	#'+',%d0
-	tst.w	(%a0)
-	jeq	.Lx1\@
-	moveq	#'-',%d0
-.Lx1\@:	printf	\bit," %c",1,%d0
-	move.l	(4,%a0),%d0
-	bclr	#31,%d0
-	jne	.Lx2\@
-	printf	\bit,"0."
-	jra	.Lx3\@
-.Lx2\@:	printf	\bit,"1."
-.Lx3\@:	printf	\bit,"%08x%08x",2,%d0,%a0@(8)
-	move.w	(2,%a0),%d0
-	ext.l	%d0
-	printf	\bit,"E%04x",1,%d0
-#else
-	printf	\bit," %08x%08x%08x",3,%a0@,%a0@(4),%a0@(8)
-#endif
-	movem.l	(%sp)+,%d0/%a0
-#endif
-.endm
-
-.macro	debug	instr,args
-#ifdef FPU_EMU_DEBUG
-	\instr	\args
-#endif
-.endm
-
-
-#endif	/* __ASSEMBLY__ */
-
-#endif	/* _ASM_M68K_SETUP_H */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/mc146818rtc.h b/ANDROID_3.4.5/arch/m68k/include/asm/mc146818rtc.h
deleted file mode 100644
index 9f70a01f..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/mc146818rtc.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * Machine dependent access functions for RTC registers.
- */
-#ifndef _ASM_MC146818RTC_H
-#define _ASM_MC146818RTC_H
-
-
-#ifdef CONFIG_ATARI
-/* RTC in Atari machines */
-
-#include <asm/atarihw.h>
-
-#define RTC_PORT(x)	(TT_RTC_BAS + 2*(x))
-#define RTC_ALWAYS_BCD	0
-
-#define CMOS_READ(addr) ({ \
-atari_outb_p((addr),RTC_PORT(0)); \
-atari_inb_p(RTC_PORT(1)); \
-})
-#define CMOS_WRITE(val, addr) ({ \
-atari_outb_p((addr),RTC_PORT(0)); \
-atari_outb_p((val),RTC_PORT(1)); \
-})
-#endif /* CONFIG_ATARI */
-
-#endif /* _ASM_MC146818RTC_H */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/mcf_pgalloc.h b/ANDROID_3.4.5/arch/m68k/include/asm/mcf_pgalloc.h
deleted file mode 100644
index 313f3dd2..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/mcf_pgalloc.h
+++ /dev/null
@@ -1,102 +0,0 @@
-#ifndef M68K_MCF_PGALLOC_H
-#define M68K_MCF_PGALLOC_H
-
-#include <asm/tlb.h>
-#include <asm/tlbflush.h>
-
-extern inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte)
-{
-	free_page((unsigned long) pte);
-}
-
-extern const char bad_pmd_string[];
-
-extern inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm,
-	unsigned long address)
-{
-	unsigned long page = __get_free_page(GFP_DMA|__GFP_REPEAT);
-
-	if (!page)
-		return NULL;
-
-	memset((void *)page, 0, PAGE_SIZE);
-	return (pte_t *) (page);
-}
-
-extern inline pmd_t *pmd_alloc_kernel(pgd_t *pgd, unsigned long address)
-{
-	return (pmd_t *) pgd;
-}
-
-#define pmd_alloc_one_fast(mm, address) ({ BUG(); ((pmd_t *)1); })
-#define pmd_alloc_one(mm, address)      ({ BUG(); ((pmd_t *)2); })
-
-#define pte_alloc_one_fast(mm, addr) pte_alloc_one(mm, addr)
-
-#define pmd_populate(mm, pmd, page) (pmd_val(*pmd) = \
-	(unsigned long)(page_address(page)))
-
-#define pmd_populate_kernel(mm, pmd, pte) (pmd_val(*pmd) = (unsigned long)(pte))
-
-#define pmd_pgtable(pmd) pmd_page(pmd)
-
-static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t page,
-				  unsigned long address)
-{
-	__free_page(page);
-}
-
-#define __pmd_free_tlb(tlb, pmd, address) do { } while (0)
-
-static inline struct page *pte_alloc_one(struct mm_struct *mm,
-	unsigned long address)
-{
-	struct page *page = alloc_pages(GFP_DMA|__GFP_REPEAT, 0);
-	pte_t *pte;
-
-	if (!page)
-		return NULL;
-
-	pte = kmap(page);
-	if (pte) {
-		clear_page(pte);
-		__flush_page_to_ram(pte);
-		flush_tlb_kernel_page(pte);
-		nocache_page(pte);
-	}
-	kunmap(page);
-
-	return page;
-}
-
-extern inline void pte_free(struct mm_struct *mm, struct page *page)
-{
-	__free_page(page);
-}
-
-/*
- * In our implementation, each pgd entry contains 1 pmd that is never allocated
- * or freed.  pgd_present is always 1, so this should never be called. -NL
- */
-#define pmd_free(mm, pmd) BUG()
-
-static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd)
-{
-	free_page((unsigned long) pgd);
-}
-
-static inline pgd_t *pgd_alloc(struct mm_struct *mm)
-{
-	pgd_t *new_pgd;
-
-	new_pgd = (pgd_t *)__get_free_page(GFP_DMA | __GFP_NOWARN);
-	if (!new_pgd)
-		return NULL;
-	memcpy(new_pgd, swapper_pg_dir, PAGE_SIZE);
-	memset(new_pgd, 0, PAGE_OFFSET >> PGDIR_SHIFT);
-	return new_pgd;
-}
-
-#define pgd_populate(mm, pmd, pte) BUG()
-
-#endif /* M68K_MCF_PGALLOC_H */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/mcf_pgtable.h b/ANDROID_3.4.5/arch/m68k/include/asm/mcf_pgtable.h
deleted file mode 100644
index 3c793682..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/mcf_pgtable.h
+++ /dev/null
@@ -1,426 +0,0 @@
-#ifndef _MCF_PGTABLE_H
-#define _MCF_PGTABLE_H
-
-#include <asm/mcfmmu.h>
-#include <asm/page.h>
-
-/*
- * MMUDR bits, in proper place. We write these directly into the MMUDR
- * after masking from the pte.
- */
-#define CF_PAGE_LOCKED		MMUDR_LK	/* 0x00000002 */
-#define CF_PAGE_EXEC		MMUDR_X		/* 0x00000004 */
-#define CF_PAGE_WRITABLE	MMUDR_W		/* 0x00000008 */
-#define CF_PAGE_READABLE	MMUDR_R		/* 0x00000010 */
-#define CF_PAGE_SYSTEM		MMUDR_SP	/* 0x00000020 */
-#define CF_PAGE_COPYBACK	MMUDR_CM_CCB	/* 0x00000040 */
-#define CF_PAGE_NOCACHE		MMUDR_CM_NCP	/* 0x00000080 */
-
-#define CF_CACHEMASK		(~MMUDR_CM_CCB)
-#define CF_PAGE_MMUDR_MASK	0x000000fe
-
-#define _PAGE_NOCACHE030	CF_PAGE_NOCACHE
-
-/*
- * MMUTR bits, need shifting down.
- */
-#define CF_PAGE_MMUTR_MASK	0x00000c00
-#define CF_PAGE_MMUTR_SHIFT	10
-
-#define CF_PAGE_VALID		(MMUTR_V << CF_PAGE_MMUTR_SHIFT)
-#define CF_PAGE_SHARED		(MMUTR_SG << CF_PAGE_MMUTR_SHIFT)
-
-/*
- * Fake bits, not implemented in CF, will get masked out before
- * hitting hardware.
- */
-#define CF_PAGE_DIRTY		0x00000001
-#define CF_PAGE_FILE		0x00000200
-#define CF_PAGE_ACCESSED	0x00001000
-
-#define _PAGE_CACHE040		0x020   /* 68040 cache mode, cachable, copyback */
-#define _PAGE_NOCACHE_S		0x040   /* 68040 no-cache mode, serialized */
-#define _PAGE_NOCACHE		0x060   /* 68040 cache mode, non-serialized */
-#define _PAGE_CACHE040W		0x000   /* 68040 cache mode, cachable, write-through */
-#define _DESCTYPE_MASK		0x003
-#define _CACHEMASK040		(~0x060)
-#define _PAGE_GLOBAL040		0x400   /* 68040 global bit, used for kva descs */
-
-/*
- * Externally used page protection values.
- */
-#define _PAGE_PRESENT	(CF_PAGE_VALID)
-#define _PAGE_ACCESSED	(CF_PAGE_ACCESSED)
-#define _PAGE_DIRTY	(CF_PAGE_DIRTY)
-#define _PAGE_READWRITE (CF_PAGE_READABLE \
-				| CF_PAGE_WRITABLE \
-				| CF_PAGE_SYSTEM \
-				| CF_PAGE_SHARED)
-
-/*
- * Compound page protection values.
- */
-#define PAGE_NONE	__pgprot(CF_PAGE_VALID \
-				 | CF_PAGE_ACCESSED)
-
-#define PAGE_SHARED     __pgprot(CF_PAGE_VALID \
-				 | CF_PAGE_ACCESSED \
-				 | CF_PAGE_SHARED)
-
-#define PAGE_INIT	__pgprot(CF_PAGE_VALID \
-				 | CF_PAGE_READABLE \
-				 | CF_PAGE_WRITABLE \
-				 | CF_PAGE_EXEC \
-				 | CF_PAGE_SYSTEM)
-
-#define PAGE_KERNEL	__pgprot(CF_PAGE_VALID \
-				 | CF_PAGE_ACCESSED \
-				 | CF_PAGE_READABLE \
-				 | CF_PAGE_WRITABLE \
-				 | CF_PAGE_EXEC \
-				 | CF_PAGE_SYSTEM \
-				 | CF_PAGE_SHARED)
-
-#define PAGE_COPY	__pgprot(CF_PAGE_VALID \
-				 | CF_PAGE_ACCESSED \
-				 | CF_PAGE_READABLE \
-				 | CF_PAGE_DIRTY)
-
-/*
- * Page protections for initialising protection_map. See mm/mmap.c
- * for use. In general, the bit positions are xwr, and P-items are
- * private, the S-items are shared.
- */
-#define __P000		PAGE_NONE
-#define __P001		__pgprot(CF_PAGE_VALID \
-				 | CF_PAGE_ACCESSED \
-				 | CF_PAGE_READABLE)
-#define __P010		__pgprot(CF_PAGE_VALID \
-				 | CF_PAGE_ACCESSED \
-				 | CF_PAGE_WRITABLE)
-#define __P011		__pgprot(CF_PAGE_VALID \
-				 | CF_PAGE_ACCESSED \
-				 | CF_PAGE_READABLE \
-				 | CF_PAGE_WRITABLE)
-#define __P100		__pgprot(CF_PAGE_VALID \
-				 | CF_PAGE_ACCESSED \
-				 | CF_PAGE_EXEC)
-#define __P101		__pgprot(CF_PAGE_VALID \
-				 | CF_PAGE_ACCESSED \
-				 | CF_PAGE_READABLE \
-				 | CF_PAGE_EXEC)
-#define __P110		__pgprot(CF_PAGE_VALID \
-				 | CF_PAGE_ACCESSED \
-				 | CF_PAGE_WRITABLE \
-				 | CF_PAGE_EXEC)
-#define __P111		__pgprot(CF_PAGE_VALID \
-				 | CF_PAGE_ACCESSED \
-				 | CF_PAGE_READABLE \
-				 | CF_PAGE_WRITABLE \
-				 | CF_PAGE_EXEC)
-
-#define __S000		PAGE_NONE
-#define __S001		__pgprot(CF_PAGE_VALID \
-				 | CF_PAGE_ACCESSED \
-				 | CF_PAGE_READABLE)
-#define __S010		PAGE_SHARED
-#define __S011		__pgprot(CF_PAGE_VALID \
-				 | CF_PAGE_ACCESSED \
-				 | CF_PAGE_SHARED \
-				 | CF_PAGE_READABLE)
-#define __S100		__pgprot(CF_PAGE_VALID \
-				 | CF_PAGE_ACCESSED \
-				 | CF_PAGE_EXEC)
-#define __S101		__pgprot(CF_PAGE_VALID \
-				 | CF_PAGE_ACCESSED \
-				 | CF_PAGE_READABLE \
-				 | CF_PAGE_EXEC)
-#define __S110		__pgprot(CF_PAGE_VALID \
-				 | CF_PAGE_ACCESSED \
-				 | CF_PAGE_SHARED \
-				 | CF_PAGE_EXEC)
-#define __S111		__pgprot(CF_PAGE_VALID \
-				 | CF_PAGE_ACCESSED \
-				 | CF_PAGE_SHARED \
-				 | CF_PAGE_READABLE \
-				 | CF_PAGE_EXEC)
-
-#define PTE_MASK	PAGE_MASK
-#define CF_PAGE_CHG_MASK (PTE_MASK | CF_PAGE_ACCESSED | CF_PAGE_DIRTY)
-
-#ifndef __ASSEMBLY__
-
-/*
- * Conversion functions: convert a page and protection to a page entry,
- * and a page entry and page directory to the page they refer to.
- */
-#define mk_pte(page, pgprot) pfn_pte(page_to_pfn(page), (pgprot))
-
-static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
-{
-	pte_val(pte) = (pte_val(pte) & CF_PAGE_CHG_MASK) | pgprot_val(newprot);
-	return pte;
-}
-
-#define pmd_set(pmdp, ptep) do {} while (0)
-
-static inline void pgd_set(pgd_t *pgdp, pmd_t *pmdp)
-{
-	pgd_val(*pgdp) = virt_to_phys(pmdp);
-}
-
-#define __pte_page(pte)	((unsigned long) (pte_val(pte) & PAGE_MASK))
-#define __pmd_page(pmd)	((unsigned long) (pmd_val(pmd)))
-
-static inline int pte_none(pte_t pte)
-{
-	return !pte_val(pte);
-}
-
-static inline int pte_present(pte_t pte)
-{
-	return pte_val(pte) & CF_PAGE_VALID;
-}
-
-static inline void pte_clear(struct mm_struct *mm, unsigned long addr,
-	pte_t *ptep)
-{
-	pte_val(*ptep) = 0;
-}
-
-#define pte_pagenr(pte)	((__pte_page(pte) - PAGE_OFFSET) >> PAGE_SHIFT)
-#define pte_page(pte)	virt_to_page(__pte_page(pte))
-
-static inline int pmd_none2(pmd_t *pmd) { return !pmd_val(*pmd); }
-#define pmd_none(pmd) pmd_none2(&(pmd))
-static inline int pmd_bad2(pmd_t *pmd) { return 0; }
-#define pmd_bad(pmd) pmd_bad2(&(pmd))
-#define pmd_present(pmd) (!pmd_none2(&(pmd)))
-static inline void pmd_clear(pmd_t *pmdp) { pmd_val(*pmdp) = 0; }
-
-static inline int pgd_none(pgd_t pgd) { return 0; }
-static inline int pgd_bad(pgd_t pgd) { return 0; }
-static inline int pgd_present(pgd_t pgd) { return 1; }
-static inline void pgd_clear(pgd_t *pgdp) {}
-
-#define pte_ERROR(e) \
-	printk(KERN_ERR "%s:%d: bad pte %08lx.\n",	\
-	__FILE__, __LINE__, pte_val(e))
-#define pmd_ERROR(e) \
-	printk(KERN_ERR "%s:%d: bad pmd %08lx.\n",	\
-	__FILE__, __LINE__, pmd_val(e))
-#define pgd_ERROR(e) \
-	printk(KERN_ERR "%s:%d: bad pgd %08lx.\n",	\
-	__FILE__, __LINE__, pgd_val(e))
-
-/*
- * The following only work if pte_present() is true.
- * Undefined behaviour if not...
- * [we have the full set here even if they don't change from m68k]
- */
-static inline int pte_read(pte_t pte)
-{
-	return pte_val(pte) & CF_PAGE_READABLE;
-}
-
-static inline int pte_write(pte_t pte)
-{
-	return pte_val(pte) & CF_PAGE_WRITABLE;
-}
-
-static inline int pte_exec(pte_t pte)
-{
-	return pte_val(pte) & CF_PAGE_EXEC;
-}
-
-static inline int pte_dirty(pte_t pte)
-{
-	return pte_val(pte) & CF_PAGE_DIRTY;
-}
-
-static inline int pte_young(pte_t pte)
-{
-	return pte_val(pte) & CF_PAGE_ACCESSED;
-}
-
-static inline int pte_file(pte_t pte)
-{
-	return pte_val(pte) & CF_PAGE_FILE;
-}
-
-static inline int pte_special(pte_t pte)
-{
-	return 0;
-}
-
-static inline pte_t pte_wrprotect(pte_t pte)
-{
-	pte_val(pte) &= ~CF_PAGE_WRITABLE;
-	return pte;
-}
-
-static inline pte_t pte_rdprotect(pte_t pte)
-{
-	pte_val(pte) &= ~CF_PAGE_READABLE;
-	return pte;
-}
-
-static inline pte_t pte_exprotect(pte_t pte)
-{
-	pte_val(pte) &= ~CF_PAGE_EXEC;
-	return pte;
-}
-
-static inline pte_t pte_mkclean(pte_t pte)
-{
-	pte_val(pte) &= ~CF_PAGE_DIRTY;
-	return pte;
-}
-
-static inline pte_t pte_mkold(pte_t pte)
-{
-	pte_val(pte) &= ~CF_PAGE_ACCESSED;
-	return pte;
-}
-
-static inline pte_t pte_mkwrite(pte_t pte)
-{
-	pte_val(pte) |= CF_PAGE_WRITABLE;
-	return pte;
-}
-
-static inline pte_t pte_mkread(pte_t pte)
-{
-	pte_val(pte) |= CF_PAGE_READABLE;
-	return pte;
-}
-
-static inline pte_t pte_mkexec(pte_t pte)
-{
-	pte_val(pte) |= CF_PAGE_EXEC;
-	return pte;
-}
-
-static inline pte_t pte_mkdirty(pte_t pte)
-{
-	pte_val(pte) |= CF_PAGE_DIRTY;
-	return pte;
-}
-
-static inline pte_t pte_mkyoung(pte_t pte)
-{
-	pte_val(pte) |= CF_PAGE_ACCESSED;
-	return pte;
-}
-
-static inline pte_t pte_mknocache(pte_t pte)
-{
-	pte_val(pte) |= 0x80 | (pte_val(pte) & ~0x40);
-	return pte;
-}
-
-static inline pte_t pte_mkcache(pte_t pte)
-{
-	pte_val(pte) &= ~CF_PAGE_NOCACHE;
-	return pte;
-}
-
-static inline pte_t pte_mkspecial(pte_t pte)
-{
-	return pte;
-}
-
-#define swapper_pg_dir kernel_pg_dir
-extern pgd_t kernel_pg_dir[PTRS_PER_PGD];
-
-/*
- * Find an entry in a pagetable directory.
- */
-#define pgd_index(address)	((address) >> PGDIR_SHIFT)
-#define pgd_offset(mm, address)	((mm)->pgd + pgd_index(address))
-
-/*
- * Find an entry in a kernel pagetable directory.
- */
-#define pgd_offset_k(address)	pgd_offset(&init_mm, address)
-
-/*
- * Find an entry in the second-level pagetable.
- */
-static inline pmd_t *pmd_offset(pgd_t *pgd, unsigned long address)
-{
-	return (pmd_t *) pgd;
-}
-
-/*
- * Find an entry in the third-level pagetable.
- */
-#define __pte_offset(address)	((address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
-#define pte_offset_kernel(dir, address) \
-	((pte_t *) __pmd_page(*(dir)) + __pte_offset(address))
-
-/*
- * Disable caching for page at given kernel virtual address.
- */
-static inline void nocache_page(void *vaddr)
-{
-	pgd_t *dir;
-	pmd_t *pmdp;
-	pte_t *ptep;
-	unsigned long addr = (unsigned long) vaddr;
-
-	dir = pgd_offset_k(addr);
-	pmdp = pmd_offset(dir, addr);
-	ptep = pte_offset_kernel(pmdp, addr);
-	*ptep = pte_mknocache(*ptep);
-}
-
-/*
- * Enable caching for page at given kernel virtual address.
- */
-static inline void cache_page(void *vaddr)
-{
-	pgd_t *dir;
-	pmd_t *pmdp;
-	pte_t *ptep;
-	unsigned long addr = (unsigned long) vaddr;
-
-	dir = pgd_offset_k(addr);
-	pmdp = pmd_offset(dir, addr);
-	ptep = pte_offset_kernel(pmdp, addr);
-	*ptep = pte_mkcache(*ptep);
-}
-
-#define PTE_FILE_MAX_BITS	21
-#define PTE_FILE_SHIFT		11
-
-static inline unsigned long pte_to_pgoff(pte_t pte)
-{
-	return pte_val(pte) >> PTE_FILE_SHIFT;
-}
-
-static inline pte_t pgoff_to_pte(unsigned pgoff)
-{
-	return __pte((pgoff << PTE_FILE_SHIFT) + CF_PAGE_FILE);
-}
-
-/*
- * Encode and de-code a swap entry (must be !pte_none(e) && !pte_present(e))
- */
-#define __swp_type(x)		((x).val & 0xFF)
-#define __swp_offset(x)		((x).val >> PTE_FILE_SHIFT)
-#define __swp_entry(typ, off)	((swp_entry_t) { (typ) | \
-					(off << PTE_FILE_SHIFT) })
-#define __pte_to_swp_entry(pte)	((swp_entry_t) { pte_val(pte) })
-#define __swp_entry_to_pte(x)	(__pte((x).val))
-
-#define pmd_page(pmd)		(pfn_to_page(pmd_val(pmd) >> PAGE_SHIFT))
-
-#define pte_offset_map(pmdp, addr) ((pte_t *)__pmd_page(*pmdp) + \
-				       __pte_offset(addr))
-#define pte_unmap(pte)		((void) 0)
-#define pfn_pte(pfn, prot)	__pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot))
-#define pte_pfn(pte)		(pte_val(pte) >> PAGE_SHIFT)
-
-#endif	/* !__ASSEMBLY__ */
-#endif	/* _MCF_PGTABLE_H */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/mcfdma.h b/ANDROID_3.4.5/arch/m68k/include/asm/mcfdma.h
deleted file mode 100644
index 10bc7e39..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/mcfdma.h
+++ /dev/null
@@ -1,121 +0,0 @@
-/****************************************************************************/
-
-/*
- *	mcfdma.h -- Coldfire internal DMA support defines.
- *
- *	(C) Copyright 1999, Rob Scott (rscott@mtrob.ml.org)
- */
-
-/****************************************************************************/
-#ifndef	mcfdma_h
-#define	mcfdma_h
-/****************************************************************************/
-
-#if !defined(CONFIG_M5272)
-
-/*
- *	Define the DMA register set addresses.
- *      Note: these are longword registers, use unsigned long as data type
- */
-#define	MCFDMA_SAR		0x00		/* DMA source address (r/w) */
-#define	MCFDMA_DAR		0x01		/* DMA destination adr (r/w) */
-/* these are word registers, use unsigned short data type */
-#define	MCFDMA_DCR		0x04		/* DMA control reg (r/w) */
-#define	MCFDMA_BCR		0x06		/* DMA byte count reg (r/w) */
-/* these are byte registers, use unsiged char data type */
-#define	MCFDMA_DSR		0x10		/* DMA status reg (r/w) */
-#define	MCFDMA_DIVR		0x14		/* DMA interrupt vec (r/w) */
-
-/*
- *	Bit definitions for the DMA Control Register (DCR).
- */
-#define	MCFDMA_DCR_INT	        0x8000		/* Enable completion irq */
-#define	MCFDMA_DCR_EEXT	        0x4000		/* Enable external DMA req */
-#define	MCFDMA_DCR_CS 	        0x2000		/* Enable cycle steal */
-#define	MCFDMA_DCR_AA   	0x1000		/* Enable auto alignment */
-#define	MCFDMA_DCR_BWC_MASK  	0x0E00		/* Bandwidth ctl mask */
-#define MCFDMA_DCR_BWC_512      0x0200          /* Bandwidth:   512 Bytes */
-#define MCFDMA_DCR_BWC_1024     0x0400          /* Bandwidth:  1024 Bytes */
-#define MCFDMA_DCR_BWC_2048     0x0600          /* Bandwidth:  2048 Bytes */
-#define MCFDMA_DCR_BWC_4096     0x0800          /* Bandwidth:  4096 Bytes */
-#define MCFDMA_DCR_BWC_8192     0x0a00          /* Bandwidth:  8192 Bytes */
-#define MCFDMA_DCR_BWC_16384    0x0c00          /* Bandwidth: 16384 Bytes */
-#define MCFDMA_DCR_BWC_32768    0x0e00          /* Bandwidth: 32768 Bytes */
-#define	MCFDMA_DCR_SAA         	0x0100		/* Single Address Access */
-#define	MCFDMA_DCR_S_RW        	0x0080		/* SAA read/write value */
-#define	MCFDMA_DCR_SINC        	0x0040		/* Source addr inc enable */
-#define	MCFDMA_DCR_SSIZE_MASK  	0x0030		/* Src xfer size */
-#define	MCFDMA_DCR_SSIZE_LONG  	0x0000		/* Src xfer size, 00 = longw */
-#define	MCFDMA_DCR_SSIZE_BYTE  	0x0010		/* Src xfer size, 01 = byte */
-#define	MCFDMA_DCR_SSIZE_WORD  	0x0020		/* Src xfer size, 10 = word */
-#define	MCFDMA_DCR_SSIZE_LINE  	0x0030		/* Src xfer size, 11 = line */
-#define	MCFDMA_DCR_DINC        	0x0008		/* Dest addr inc enable */
-#define	MCFDMA_DCR_DSIZE_MASK  	0x0006		/* Dest xfer size */
-#define	MCFDMA_DCR_DSIZE_LONG  	0x0000		/* Dest xfer size, 00 = long */
-#define	MCFDMA_DCR_DSIZE_BYTE  	0x0002		/* Dest xfer size, 01 = byte */
-#define	MCFDMA_DCR_DSIZE_WORD  	0x0004		/* Dest xfer size, 10 = word */
-#define	MCFDMA_DCR_DSIZE_LINE  	0x0006		/* Dest xfer size, 11 = line */
-#define	MCFDMA_DCR_START       	0x0001		/* Start transfer */
-
-/*
- *	Bit definitions for the DMA Status Register (DSR).
- */
-#define	MCFDMA_DSR_CE	        0x40		/* Config error */
-#define	MCFDMA_DSR_BES	        0x20		/* Bus Error on source */
-#define	MCFDMA_DSR_BED 	        0x10		/* Bus Error on dest */
-#define	MCFDMA_DSR_REQ   	0x04		/* Requests remaining */
-#define	MCFDMA_DSR_BSY  	0x02		/* Busy */
-#define	MCFDMA_DSR_DONE        	0x01		/* DMA transfer complete */
-
-#else /* This is an MCF5272 */
-
-#define MCFDMA_DMR        0x00    /* Mode Register (r/w) */
-#define MCFDMA_DIR        0x03    /* Interrupt trigger register (r/w) */
-#define MCFDMA_DSAR       0x03    /* Source Address register (r/w) */
-#define MCFDMA_DDAR       0x04    /* Destination Address register (r/w) */
-#define MCFDMA_DBCR       0x02    /* Byte Count Register (r/w) */
-
-/* Bit definitions for the DMA Mode Register (DMR) */
-#define MCFDMA_DMR_RESET     0x80000000L /* Reset bit */
-#define MCFDMA_DMR_EN        0x40000000L /* DMA enable */
-#define MCFDMA_DMR_RQM       0x000C0000L /* Request Mode Mask */
-#define MCFDMA_DMR_RQM_DUAL  0x000C0000L /* Dual address mode, the only valid mode */
-#define MCFDMA_DMR_DSTM      0x00002000L /* Destination addressing mask */
-#define MCFDMA_DMR_DSTM_SA   0x00000000L /* Destination uses static addressing */
-#define MCFDMA_DMR_DSTM_IA   0x00002000L /* Destination uses incremental addressing */
-#define MCFDMA_DMR_DSTT_UD   0x00000400L /* Destination is user data */
-#define MCFDMA_DMR_DSTT_UC   0x00000800L /* Destination is user code */
-#define MCFDMA_DMR_DSTT_SD   0x00001400L /* Destination is supervisor data */
-#define MCFDMA_DMR_DSTT_SC   0x00001800L /* Destination is supervisor code */
-#define MCFDMA_DMR_DSTS_OFF  0x8         /* offset to the destination size bits */
-#define MCFDMA_DMR_DSTS_LONG 0x00000000L /* Long destination size */
-#define MCFDMA_DMR_DSTS_BYTE 0x00000100L /* Byte destination size */
-#define MCFDMA_DMR_DSTS_WORD 0x00000200L /* Word destination size */
-#define MCFDMA_DMR_DSTS_LINE 0x00000300L /* Line destination size */
-#define MCFDMA_DMR_SRCM      0x00000020L /* Source addressing mask */
-#define MCFDMA_DMR_SRCM_SA   0x00000000L /* Source uses static addressing */
-#define MCFDMA_DMR_SRCM_IA   0x00000020L /* Source uses incremental addressing */
-#define MCFDMA_DMR_SRCT_UD   0x00000004L /* Source is user data */
-#define MCFDMA_DMR_SRCT_UC   0x00000008L /* Source is user code */
-#define MCFDMA_DMR_SRCT_SD   0x00000014L /* Source is supervisor data */
-#define MCFDMA_DMR_SRCT_SC   0x00000018L /* Source is supervisor code */
-#define MCFDMA_DMR_SRCS_OFF  0x0         /* Offset to the source size bits */
-#define MCFDMA_DMR_SRCS_LONG 0x00000000L /* Long source size */
-#define MCFDMA_DMR_SRCS_BYTE 0x00000001L /* Byte source size */
-#define MCFDMA_DMR_SRCS_WORD 0x00000002L /* Word source size */
-#define MCFDMA_DMR_SRCS_LINE 0x00000003L /* Line source size */
-
-/* Bit definitions for the DMA interrupt register (DIR) */
-#define MCFDMA_DIR_INVEN     0x1000 /* Invalid Combination interrupt enable */
-#define MCFDMA_DIR_ASCEN     0x0800 /* Address Sequence Complete (Completion) interrupt enable */
-#define MCFDMA_DIR_TEEN      0x0200 /* Transfer Error interrupt enable */
-#define MCFDMA_DIR_TCEN      0x0100 /* Transfer Complete (a bus transfer, that is) interrupt enable */
-#define MCFDMA_DIR_INV       0x0010 /* Invalid Combination */
-#define MCFDMA_DIR_ASC       0x0008 /* Address Sequence Complete (DMA Completion) */
-#define MCFDMA_DIR_TE        0x0002 /* Transfer Error */
-#define MCFDMA_DIR_TC        0x0001 /* Transfer Complete */
-
-#endif /* !defined(CONFIG_M5272) */ 
-
-/****************************************************************************/
-#endif	/* mcfdma_h */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/mcfgpio.h b/ANDROID_3.4.5/arch/m68k/include/asm/mcfgpio.h
deleted file mode 100644
index ee5e4ccc..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/mcfgpio.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * Coldfire generic GPIO support.
- *
- * (C) Copyright 2009, Steven King <sfking@fdwdc.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef mcfgpio_h
-#define mcfgpio_h
-
-#include <linux/io.h>
-#include <asm-generic/gpio.h>
-
-struct mcf_gpio_chip {
-	struct gpio_chip gpio_chip;
-	void __iomem *pddr;
-	void __iomem *podr;
-	void __iomem *ppdr;
-	void __iomem *setr;
-	void __iomem *clrr;
-	const u8 *gpio_to_pinmux;
-};
-
-int mcf_gpio_direction_input(struct gpio_chip *, unsigned);
-int mcf_gpio_get_value(struct gpio_chip *, unsigned);
-int mcf_gpio_direction_output(struct gpio_chip *, unsigned, int);
-void mcf_gpio_set_value(struct gpio_chip *, unsigned, int);
-void mcf_gpio_set_value_fast(struct gpio_chip *, unsigned, int);
-int mcf_gpio_request(struct gpio_chip *, unsigned);
-void mcf_gpio_free(struct gpio_chip *, unsigned);
-
-#endif
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/mcfintc.h b/ANDROID_3.4.5/arch/m68k/include/asm/mcfintc.h
deleted file mode 100644
index 4183320a..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/mcfintc.h
+++ /dev/null
@@ -1,89 +0,0 @@
-/****************************************************************************/
-
-/*
- *	mcfintc.h -- support definitions for the simple ColdFire
- *		     Interrupt Controller
- *
- * 	(C) Copyright 2009,  Greg Ungerer <gerg@uclinux.org>
- */
-
-/****************************************************************************/
-#ifndef	mcfintc_h
-#define	mcfintc_h
-/****************************************************************************/
-
-/*
- * Most of the older ColdFire parts use the same simple interrupt
- * controller. This is currently used on the 5206, 5206e, 5249, 5307
- * and 5407 parts.
- *
- * The builtin peripherals are masked through dedicated bits in the
- * Interrupt Mask register (IMR) - and this is not indexed (or in any way
- * related to) the actual interrupt number they use. So knowing the IRQ
- * number doesn't explicitly map to a certain internal device for
- * interrupt control purposes.
- */
-
-/*
- * Bit definitions for the ICR family of registers.
- */
-#define	MCFSIM_ICR_AUTOVEC	0x80		/* Auto-vectored intr */
-#define	MCFSIM_ICR_LEVEL0	0x00		/* Level 0 intr */
-#define	MCFSIM_ICR_LEVEL1	0x04		/* Level 1 intr */
-#define	MCFSIM_ICR_LEVEL2	0x08		/* Level 2 intr */
-#define	MCFSIM_ICR_LEVEL3	0x0c		/* Level 3 intr */
-#define	MCFSIM_ICR_LEVEL4	0x10		/* Level 4 intr */
-#define	MCFSIM_ICR_LEVEL5	0x14		/* Level 5 intr */
-#define	MCFSIM_ICR_LEVEL6	0x18		/* Level 6 intr */
-#define	MCFSIM_ICR_LEVEL7	0x1c		/* Level 7 intr */
-
-#define	MCFSIM_ICR_PRI0		0x00		/* Priority 0 intr */
-#define	MCFSIM_ICR_PRI1		0x01		/* Priority 1 intr */
-#define	MCFSIM_ICR_PRI2		0x02		/* Priority 2 intr */
-#define	MCFSIM_ICR_PRI3		0x03		/* Priority 3 intr */
-
-/*
- * IMR bit position definitions. Not all ColdFire parts with this interrupt
- * controller actually support all of these interrupt sources. But the bit
- * numbers are the same in all cores.
- */
-#define	MCFINTC_EINT1		1		/* External int #1 */
-#define	MCFINTC_EINT2		2		/* External int #2 */
-#define	MCFINTC_EINT3		3		/* External int #3 */
-#define	MCFINTC_EINT4		4		/* External int #4 */
-#define	MCFINTC_EINT5		5		/* External int #5 */
-#define	MCFINTC_EINT6		6		/* External int #6 */
-#define	MCFINTC_EINT7		7		/* External int #7 */
-#define	MCFINTC_SWT		8		/* Software Watchdog */
-#define	MCFINTC_TIMER1		9
-#define	MCFINTC_TIMER2		10
-#define	MCFINTC_I2C		11		/* I2C / MBUS */
-#define	MCFINTC_UART0		12
-#define	MCFINTC_UART1		13
-#define	MCFINTC_DMA0		14
-#define	MCFINTC_DMA1		15
-#define	MCFINTC_DMA2		16
-#define	MCFINTC_DMA3		17
-#define	MCFINTC_QSPI		18
-
-#ifndef __ASSEMBLER__
-
-/*
- * There is no one-is-one correspondance between the interrupt number (irq)
- * and the bit fields on the mask register. So we create a per-cpu type
- * mapping of irq to mask bit. The CPU platform code needs to register
- * its supported irq's at init time, using this function.
- */
-extern unsigned char mcf_irq2imr[];
-static inline void mcf_mapirq2imr(int irq, int imr)
-{
-	mcf_irq2imr[irq] = imr;
-}
-
-void mcf_autovector(int irq);
-void mcf_setimr(int index);
-void mcf_clrimr(int index);
-#endif
-
-/****************************************************************************/
-#endif	/* mcfintc_h */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/mcfmbus.h b/ANDROID_3.4.5/arch/m68k/include/asm/mcfmbus.h
deleted file mode 100644
index 319899c4..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/mcfmbus.h
+++ /dev/null
@@ -1,77 +0,0 @@
-/****************************************************************************/
-
-/*
- *      mcfmbus.h -- Coldfire MBUS support defines.
- *
- *      (C) Copyright 1999, Martin Floeer (mfloeer@axcent.de) 
- */
-
-/****************************************************************************/
-
-
-#ifndef mcfmbus_h
-#define mcfmbus_h
-
-
-#define MCFMBUS_BASE		0x280
-#define MCFMBUS_IRQ_VECTOR	0x19
-#define MCFMBUS_IRQ		0x1
-#define MCFMBUS_CLK		0x3f
-#define MCFMBUS_IRQ_LEVEL	0x07	/*IRQ Level 1*/
-#define MCFMBUS_ADDRESS		0x01
-
-
-/*
-*	Define the 5307 MBUS register set addresses
-*/
-
-#define MCFMBUS_MADR	0x00
-#define MCFMBUS_MFDR	0x04
-#define MCFMBUS_MBCR	0x08
-#define MCFMBUS_MBSR	0x0C
-#define MCFMBUS_MBDR	0x10
-
-
-#define MCFMBUS_MADR_ADDR(a)	(((a)&0x7F)<<0x01) /*Slave Address*/
-
-#define MCFMBUS_MFDR_MBC(a)	((a)&0x3F)	   /*M-Bus Clock*/
-
-/*
-*	Define bit flags in Control Register
-*/
-
-#define MCFMBUS_MBCR_MEN           (0x80)  /* M-Bus Enable                 */
-#define MCFMBUS_MBCR_MIEN          (0x40)  /* M-Bus Interrupt Enable       */
-#define MCFMBUS_MBCR_MSTA          (0x20)  /* Master/Slave Mode Select Bit */
-#define MCFMBUS_MBCR_MTX           (0x10)  /* Transmit/Rcv Mode Select Bit */
-#define MCFMBUS_MBCR_TXAK          (0x08)  /* Transmit Acknowledge Enable  */
-#define MCFMBUS_MBCR_RSTA          (0x04)  /* Repeat Start                 */
-
-/*
-*	Define bit flags in Status Register
-*/
-
-#define MCFMBUS_MBSR_MCF           (0x80)  /* Data Transfer Complete       */
-#define MCFMBUS_MBSR_MAAS          (0x40)  /* Addressed as a Slave         */
-#define MCFMBUS_MBSR_MBB           (0x20)  /* Bus Busy                     */
-#define MCFMBUS_MBSR_MAL           (0x10)  /* Arbitration Lost             */
-#define MCFMBUS_MBSR_SRW           (0x04)  /* Slave Transmit               */
-#define MCFMBUS_MBSR_MIF           (0x02)  /* M-Bus Interrupt              */
-#define MCFMBUS_MBSR_RXAK          (0x01)  /* No Acknowledge Received      */
-
-/*
-*	Define bit flags in DATA I/O Register
-*/
-
-#define MCFMBUS_MBDR_READ          (0x01)  /* 1=read 0=write MBUS */
-
-#define MBUSIOCSCLOCK		1
-#define MBUSIOCGCLOCK		2
-#define MBUSIOCSADDR			3
-#define MBUSIOCGADDR			4
-#define MBUSIOCSSLADDR			5
-#define MBUSIOCGSLADDR			6
-#define MBUSIOCSSUBADDR			7
-#define MBUSIOCGSUBADDR			8
-
-#endif
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/mcfmmu.h b/ANDROID_3.4.5/arch/m68k/include/asm/mcfmmu.h
deleted file mode 100644
index 26cc3d5a..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/mcfmmu.h
+++ /dev/null
@@ -1,112 +0,0 @@
-/*
- *	mcfmmu.h -- definitions for the ColdFire v4e MMU
- *
- *	(C) Copyright 2011,  Greg Ungerer <gerg@uclinux.org>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file COPYING in the main directory of this archive
- * for more details.
- */
-
-#ifndef	MCFMMU_H
-#define	MCFMMU_H
-
-/*
- *	The MMU support registers are mapped into the address space using
- *	the processor MMUBASE register. We used a fixed address for mapping,
- *	there doesn't seem any need to make this configurable yet.
- */
-#define	MMUBASE		0xfe000000
-
-/*
- *	The support registers of the MMU. Names are the sames as those
- *	used in the Freescale v4e documentation.
- */
-#define	MMUCR		(MMUBASE + 0x00)	/* Control register */
-#define	MMUOR		(MMUBASE + 0x04)	/* Operation register */
-#define	MMUSR		(MMUBASE + 0x08)	/* Status register */
-#define	MMUAR		(MMUBASE + 0x10)	/* TLB Address register */
-#define	MMUTR		(MMUBASE + 0x14)	/* TLB Tag register */
-#define	MMUDR		(MMUBASE + 0x18)	/* TLB Data register */
-
-/*
- *	MMU Control register bit flags
- */
-#define	MMUCR_EN	0x00000001		/* Virtual mode enable */
-#define	MMUCR_ASM	0x00000002		/* Address space mode */
-
-/*
- *	MMU Operation register.
- */
-#define	MMUOR_UAA	0x00000001		/* Update allocatiom address */
-#define	MMUOR_ACC	0x00000002		/* TLB access */
-#define	MMUOR_RD	0x00000004		/* TLB access read */
-#define	MMUOR_WR	0x00000000		/* TLB access write */
-#define	MMUOR_ADR	0x00000008		/* TLB address select */
-#define	MMUOR_ITLB	0x00000010		/* ITLB operation */
-#define	MMUOR_CAS	0x00000020		/* Clear non-locked ASID TLBs */
-#define	MMUOR_CNL	0x00000040		/* Clear non-locked TLBs */
-#define	MMUOR_CA	0x00000080		/* Clear all TLBs */
-#define	MMUOR_STLB	0x00000100		/* Search TLBs */
-#define	MMUOR_AAN	16			/* TLB allocation address */
-#define	MMUOR_AAMASK	0xffff0000		/* AA mask */
-
-/*
- *	MMU Status register.
- */
-#define	MMUSR_HIT	0x00000002		/* Search TLB hit */
-#define	MMUSR_WF	0x00000008		/* Write access fault */
-#define	MMUSR_RF	0x00000010		/* Read access fault */
-#define	MMUSR_SPF	0x00000020		/* Supervisor protect fault */
-
-/*
- *	MMU Read/Write Tag register.
- */
-#define	MMUTR_V		0x00000001		/* Valid */
-#define	MMUTR_SG	0x00000002		/* Shared global */
-#define	MMUTR_IDN	2			/* Address Space ID */
-#define	MMUTR_IDMASK	0x000003fc		/* ASID mask */
-#define	MMUTR_VAN	10			/* Virtual Address */
-#define	MMUTR_VAMASK	0xfffffc00		/* VA mask */
-
-/*
- *	MMU Read/Write Data register.
- */
-#define	MMUDR_LK	0x00000002		/* Lock entry */
-#define	MMUDR_X		0x00000004		/* Execute access enable */
-#define	MMUDR_W		0x00000008		/* Write access enable */
-#define	MMUDR_R		0x00000010		/* Read access enable */
-#define	MMUDR_SP	0x00000020		/* Supervisor access enable */
-#define	MMUDR_CM_CWT	0x00000000		/* Cachable write thru */
-#define	MMUDR_CM_CCB	0x00000040		/* Cachable copy back */
-#define	MMUDR_CM_NCP	0x00000080		/* Non-cachable precise */
-#define	MMUDR_CM_NCI	0x000000c0		/* Non-cachable imprecise */
-#define	MMUDR_SZ_1MB	0x00000000		/* 1MB page size */
-#define	MMUDR_SZ_4KB	0x00000100		/* 4kB page size */
-#define	MMUDR_SZ_8KB	0x00000200		/* 8kB page size */
-#define	MMUDR_SZ_1KB	0x00000300		/* 1kB page size */
-#define	MMUDR_PAN	10			/* Physical address */
-#define	MMUDR_PAMASK	0xfffffc00		/* PA mask */
-
-#ifndef __ASSEMBLY__
-
-/*
- *	Simple access functions for the MMU registers. Nothing fancy
- *	currently required, just simple 32bit access.
- */
-static inline u32 mmu_read(u32 a)
-{
-	return *((volatile u32 *) a);
-}
-
-static inline void mmu_write(u32 a, u32 v)
-{
-	*((volatile u32 *) a) = v;
-	__asm__ __volatile__ ("nop");
-}
-
-int cf_tlb_miss(struct pt_regs *regs, int write, int dtlb, int extension_word);
-
-#endif
-
-#endif	/* MCFMMU_H */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/mcfne.h b/ANDROID_3.4.5/arch/m68k/include/asm/mcfne.h
deleted file mode 100644
index bf638be0..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/mcfne.h
+++ /dev/null
@@ -1,242 +0,0 @@
-/****************************************************************************/
-
-/*
- *	mcfne.h -- NE2000 in ColdFire eval boards.
- *
- *	(C) Copyright 1999-2000, Greg Ungerer (gerg@snapgear.com)
- *	(C) Copyright 2000,      Lineo (www.lineo.com)
- *	(C) Copyright 2001,      SnapGear (www.snapgear.com)
- *
- *      19990409 David W. Miller  Converted from m5206ne.h for 5307 eval board
- *
- *      Hacked support for m5206e Cadre III evaluation board
- *      Fred Stevens (fred.stevens@pemstar.com) 13 April 1999
- */
-
-/****************************************************************************/
-#ifndef	mcfne_h
-#define	mcfne_h
-/****************************************************************************/
-
-
-/*
- *	Support for NE2000 clones devices in ColdFire based boards.
- *	Not all boards address these parts the same way, some use a
- *	direct addressing method, others use a side-band address space
- *	to access odd address registers, some require byte swapping
- *	others do not.
- */
-#define	BSWAP(w)	(((w) << 8) | ((w) >> 8))
-#define	RSWAP(w)	(w)
-
-
-/*
- *	Define the basic hardware resources of NE2000 boards.
- */
-
-#if defined(CONFIG_ARN5206)
-#define NE2000_ADDR		0x40000300
-#define NE2000_ODDOFFSET	0x00010000
-#define	NE2000_IRQ_VECTOR	0xf0
-#define	NE2000_IRQ_PRIORITY	2
-#define	NE2000_IRQ_LEVEL	4
-#define	NE2000_BYTE		volatile unsigned short
-#endif
-
-#if defined(CONFIG_M5206eC3)
-#define	NE2000_ADDR		0x40000300
-#define	NE2000_ODDOFFSET	0x00010000
-#define	NE2000_IRQ_VECTOR	0x1c
-#define	NE2000_IRQ_PRIORITY	2
-#define	NE2000_IRQ_LEVEL	4
-#define	NE2000_BYTE		volatile unsigned short
-#endif
-
-#if defined(CONFIG_M5206e) && defined(CONFIG_NETtel)
-#define NE2000_ADDR		0x30000300
-#define NE2000_IRQ_VECTOR	25
-#define NE2000_IRQ_PRIORITY	1
-#define NE2000_IRQ_LEVEL	3
-#define	NE2000_BYTE		volatile unsigned char
-#endif
-
-#if defined(CONFIG_M5307C3)
-#define NE2000_ADDR		0x40000300
-#define NE2000_ODDOFFSET	0x00010000
-#define NE2000_IRQ_VECTOR	0x1b
-#define	NE2000_BYTE		volatile unsigned short
-#endif
-
-#if defined(CONFIG_M5272) && defined(CONFIG_NETtel)
-#define NE2000_ADDR		0x30600300
-#define NE2000_ODDOFFSET	0x00008000
-#define NE2000_IRQ_VECTOR	67
-#undef	BSWAP
-#define	BSWAP(w)		(w)
-#define	NE2000_BYTE		volatile unsigned short
-#undef	RSWAP
-#define	RSWAP(w)		(((w) << 8) | ((w) >> 8))
-#endif
-
-#if defined(CONFIG_M5307) && defined(CONFIG_NETtel)
-#define NE2000_ADDR0		0x30600300
-#define NE2000_ADDR1		0x30800300
-#define NE2000_ODDOFFSET	0x00008000
-#define NE2000_IRQ_VECTOR0	27
-#define NE2000_IRQ_VECTOR1	29
-#undef	BSWAP
-#define	BSWAP(w)		(w)
-#define	NE2000_BYTE		volatile unsigned short
-#undef	RSWAP
-#define	RSWAP(w)		(((w) << 8) | ((w) >> 8))
-#endif
-
-#if defined(CONFIG_M5307) && defined(CONFIG_SECUREEDGEMP3)
-#define NE2000_ADDR		0x30600300
-#define NE2000_ODDOFFSET	0x00008000
-#define NE2000_IRQ_VECTOR	27
-#undef	BSWAP
-#define	BSWAP(w)		(w)
-#define	NE2000_BYTE		volatile unsigned short
-#undef	RSWAP
-#define	RSWAP(w)		(((w) << 8) | ((w) >> 8))
-#endif
-
-#if defined(CONFIG_ARN5307)
-#define NE2000_ADDR		0xfe600300
-#define NE2000_ODDOFFSET	0x00010000
-#define NE2000_IRQ_VECTOR	0x1b
-#define NE2000_IRQ_PRIORITY	2
-#define NE2000_IRQ_LEVEL	3
-#define	NE2000_BYTE		volatile unsigned short
-#endif
-
-#if defined(CONFIG_M5407C3)
-#define NE2000_ADDR		0x40000300
-#define NE2000_ODDOFFSET	0x00010000
-#define NE2000_IRQ_VECTOR	0x1b
-#define	NE2000_BYTE		volatile unsigned short
-#endif
-
-/****************************************************************************/
-
-/*
- *	Side-band address space for odd address requires re-mapping
- *	many of the standard ISA access functions.
- */
-#ifdef NE2000_ODDOFFSET
-
-#undef outb
-#undef outb_p
-#undef inb
-#undef inb_p
-#undef outsb
-#undef outsw
-#undef insb
-#undef insw
-
-#define	outb	ne2000_outb
-#define	inb	ne2000_inb
-#define	outb_p	ne2000_outb
-#define	inb_p	ne2000_inb
-#define	outsb	ne2000_outsb
-#define	outsw	ne2000_outsw
-#define	insb	ne2000_insb
-#define	insw	ne2000_insw
-
-
-#ifndef COLDFIRE_NE2000_FUNCS
-
-void ne2000_outb(unsigned int val, unsigned int addr);
-int  ne2000_inb(unsigned int addr);
-void ne2000_insb(unsigned int addr, void *vbuf, int unsigned long len);
-void ne2000_insw(unsigned int addr, void *vbuf, unsigned long len);
-void ne2000_outsb(unsigned int addr, void *vbuf, unsigned long len);
-void ne2000_outsw(unsigned int addr, void *vbuf, unsigned long len);
-
-#else
-
-/*
- *	This macro converts a conventional register address into the
- *	real memory pointer of the mapped NE2000 device.
- *	On most NE2000 implementations on ColdFire boards the chip is
- *	mapped in kinda funny, due to its ISA heritage.
- */
-#define	NE2000_PTR(addr)	((addr&0x1)?(NE2000_ODDOFFSET+addr-1):(addr))
-#define	NE2000_DATA_PTR(addr)	(addr)
-
-
-void ne2000_outb(unsigned int val, unsigned int addr)
-{
-	NE2000_BYTE	*rp;
-
-	rp = (NE2000_BYTE *) NE2000_PTR(addr);
-	*rp = RSWAP(val);
-}
-
-int ne2000_inb(unsigned int addr)
-{
-	NE2000_BYTE	*rp, val;
-
-	rp = (NE2000_BYTE *) NE2000_PTR(addr);
-	val = *rp;
-	return((int) ((NE2000_BYTE) RSWAP(val)));
-}
-
-void ne2000_insb(unsigned int addr, void *vbuf, int unsigned long len)
-{
-	NE2000_BYTE	*rp, val;
-	unsigned char	*buf;
-
-	buf = (unsigned char *) vbuf;
-	rp = (NE2000_BYTE *) NE2000_DATA_PTR(addr);
-	for (; (len > 0); len--) {
-		val = *rp;
-		*buf++ = RSWAP(val);
-	}
-}
-
-void ne2000_insw(unsigned int addr, void *vbuf, unsigned long len)
-{
-	volatile unsigned short	*rp;
-	unsigned short		w, *buf;
-
-	buf = (unsigned short *) vbuf;
-	rp = (volatile unsigned short *) NE2000_DATA_PTR(addr);
-	for (; (len > 0); len--) {
-		w = *rp;
-		*buf++ = BSWAP(w);
-	}
-}
-
-void ne2000_outsb(unsigned int addr, const void *vbuf, unsigned long len)
-{
-	NE2000_BYTE	*rp, val;
-	unsigned char	*buf;
-
-	buf = (unsigned char *) vbuf;
-	rp = (NE2000_BYTE *) NE2000_DATA_PTR(addr);
-	for (; (len > 0); len--) {
-		val = *buf++;
-		*rp = RSWAP(val);
-	}
-}
-
-void ne2000_outsw(unsigned int addr, const void *vbuf, unsigned long len)
-{
-	volatile unsigned short	*rp;
-	unsigned short		w, *buf;
-
-	buf = (unsigned short *) vbuf;
-	rp = (volatile unsigned short *) NE2000_DATA_PTR(addr);
-	for (; (len > 0); len--) {
-		w = *buf++;
-		*rp = BSWAP(w);
-	}
-}
-
-#endif /* COLDFIRE_NE2000_FUNCS */
-#endif /* NE2000_OFFOFFSET */
-
-/****************************************************************************/
-#endif	/* mcfne_h */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/mcfpit.h b/ANDROID_3.4.5/arch/m68k/include/asm/mcfpit.h
deleted file mode 100644
index 9fd321ca..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/mcfpit.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/****************************************************************************/
-
-/*
- *	mcfpit.h -- ColdFire internal PIT timer support defines.
- *
- *	(C) Copyright 2003, Greg Ungerer (gerg@snapgear.com)
- */
-
-/****************************************************************************/
-#ifndef	mcfpit_h
-#define	mcfpit_h
-/****************************************************************************/
-
-/*
- *	Define the PIT timer register address offsets.
- */
-#define	MCFPIT_PCSR		0x0		/* PIT control register */
-#define	MCFPIT_PMR		0x2		/* PIT modulus register */
-#define	MCFPIT_PCNTR		0x4		/* PIT count register */
-
-/*
- *	Bit definitions for the PIT Control and Status register.
- */
-#define	MCFPIT_PCSR_CLK1	0x0000		/* System clock divisor */
-#define	MCFPIT_PCSR_CLK2	0x0100		/* System clock divisor */
-#define	MCFPIT_PCSR_CLK4	0x0200		/* System clock divisor */
-#define	MCFPIT_PCSR_CLK8	0x0300		/* System clock divisor */
-#define	MCFPIT_PCSR_CLK16	0x0400		/* System clock divisor */
-#define	MCFPIT_PCSR_CLK32	0x0500		/* System clock divisor */
-#define	MCFPIT_PCSR_CLK64	0x0600		/* System clock divisor */
-#define	MCFPIT_PCSR_CLK128	0x0700		/* System clock divisor */
-#define	MCFPIT_PCSR_CLK256	0x0800		/* System clock divisor */
-#define	MCFPIT_PCSR_CLK512	0x0900		/* System clock divisor */
-#define	MCFPIT_PCSR_CLK1024	0x0a00		/* System clock divisor */
-#define	MCFPIT_PCSR_CLK2048	0x0b00		/* System clock divisor */
-#define	MCFPIT_PCSR_CLK4096	0x0c00		/* System clock divisor */
-#define	MCFPIT_PCSR_CLK8192	0x0d00		/* System clock divisor */
-#define	MCFPIT_PCSR_CLK16384	0x0e00		/* System clock divisor */
-#define	MCFPIT_PCSR_CLK32768	0x0f00		/* System clock divisor */
-#define	MCFPIT_PCSR_DOZE	0x0040		/* Clock run in doze mode */
-#define	MCFPIT_PCSR_HALTED	0x0020		/* Clock run in halt mode */
-#define	MCFPIT_PCSR_OVW		0x0010		/* Overwrite PIT counter now */
-#define	MCFPIT_PCSR_PIE		0x0008		/* Enable PIT interrupt */
-#define	MCFPIT_PCSR_PIF		0x0004		/* PIT interrupt flag */
-#define	MCFPIT_PCSR_RLD		0x0002		/* Reload counter */
-#define	MCFPIT_PCSR_EN		0x0001		/* Enable PIT */
-#define	MCFPIT_PCSR_DISABLE	0x0000		/* Disable PIT */
-
-/****************************************************************************/
-#endif	/* mcfpit_h */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/mcfqspi.h b/ANDROID_3.4.5/arch/m68k/include/asm/mcfqspi.h
deleted file mode 100644
index 7b51416c..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/mcfqspi.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * Definitions for Freescale Coldfire QSPI module
- *
- * Copyright 2010 Steven King <sfking@fdwdc.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- *
-*/
-
-#ifndef mcfqspi_h
-#define mcfqspi_h
-
-/**
- * struct mcfqspi_cs_control - chip select control for the coldfire qspi driver
- * @setup: setup the control; allocate gpio's, etc. May be NULL.
- * @teardown: finish with the control; free gpio's, etc. May be NULL.
- * @select: output the signals to select the device.  Can not be NULL.
- * @deselect: output the signals to deselect the device. Can not be NULL.
- *
- * The QSPI module has 4 hardware chip selects.  We don't use them.  Instead
- * platforms are required to supply a mcfqspi_cs_control as a part of the
- * platform data for each QSPI master controller.  Only the select and
- * deselect functions are required.
-*/
-struct mcfqspi_cs_control {
-	int 	(*setup)(struct mcfqspi_cs_control *);
-	void	(*teardown)(struct mcfqspi_cs_control *);
-	void	(*select)(struct mcfqspi_cs_control *, u8, bool);
-	void	(*deselect)(struct mcfqspi_cs_control *, u8, bool);
-};
-
-/**
- * struct mcfqspi_platform_data - platform data for the coldfire qspi driver
- * @bus_num: board specific identifier for this qspi driver.
- * @num_chipselects: number of chip selects supported by this qspi driver.
- * @cs_control: platform dependent chip select control.
-*/
-struct mcfqspi_platform_data {
-	s16	bus_num;
-	u16	num_chipselect;
-	struct mcfqspi_cs_control *cs_control;
-};
-
-#endif /* mcfqspi_h */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/mcfsim.h b/ANDROID_3.4.5/arch/m68k/include/asm/mcfsim.h
deleted file mode 100644
index ebd03040..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/mcfsim.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/****************************************************************************/
-
-/*
- *	mcfsim.h -- ColdFire System Integration Module support.
- *
- *	(C) Copyright 1999-2003, Greg Ungerer (gerg@snapgear.com)
- * 	(C) Copyright 2000, Lineo Inc. (www.lineo.com)
- */
-
-/****************************************************************************/
-#ifndef	mcfsim_h
-#define	mcfsim_h
-/****************************************************************************/
-
-/*
- * Include the appropriate ColdFire CPU specific System Integration Module
- * (SIM) definitions.
- */
-#if defined(CONFIG_M5206) || defined(CONFIG_M5206e)
-#include <asm/m5206sim.h>
-#include <asm/mcfintc.h>
-#elif defined(CONFIG_M520x)
-#include <asm/m520xsim.h>
-#elif defined(CONFIG_M523x)
-#include <asm/m523xsim.h>
-#include <asm/mcfintc.h>
-#elif defined(CONFIG_M5249)
-#include <asm/m5249sim.h>
-#include <asm/mcfintc.h>
-#elif defined(CONFIG_M527x)
-#include <asm/m527xsim.h>
-#elif defined(CONFIG_M5272)
-#include <asm/m5272sim.h>
-#elif defined(CONFIG_M528x)
-#include <asm/m528xsim.h>
-#elif defined(CONFIG_M5307)
-#include <asm/m5307sim.h>
-#include <asm/mcfintc.h>
-#elif defined(CONFIG_M532x)
-#include <asm/m532xsim.h>
-#elif defined(CONFIG_M5407)
-#include <asm/m5407sim.h>
-#include <asm/mcfintc.h>
-#elif defined(CONFIG_M54xx)
-#include <asm/m54xxsim.h>
-#endif
-
-/****************************************************************************/
-#endif	/* mcfsim_h */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/mcfslt.h b/ANDROID_3.4.5/arch/m68k/include/asm/mcfslt.h
deleted file mode 100644
index d0d0ecba..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/mcfslt.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/****************************************************************************/
-
-/*
- *	mcfslt.h -- ColdFire internal Slice (SLT) timer support defines.
- *
- *	(C) Copyright 2004, Greg Ungerer (gerg@snapgear.com)
- *	(C) Copyright 2009, Philippe De Muyter (phdm@macqel.be)
- */
-
-/****************************************************************************/
-#ifndef mcfslt_h
-#define mcfslt_h
-/****************************************************************************/
-
-/*
- *	Get address specific defines for the 547x.
- */
-#define MCFSLT_TIMER0		0x900	/* Base address of TIMER0 */
-#define MCFSLT_TIMER1		0x910	/* Base address of TIMER1 */
-
-
-/*
- *	Define the SLT timer register set addresses.
- */
-#define MCFSLT_STCNT		0x00	/* Terminal count */
-#define MCFSLT_SCR		0x04	/* Control */
-#define MCFSLT_SCNT		0x08	/* Current count */
-#define MCFSLT_SSR		0x0C	/* Status */
-
-/*
- *	Bit definitions for the SCR control register.
- */
-#define MCFSLT_SCR_RUN		0x04000000	/* Run mode (continuous) */
-#define MCFSLT_SCR_IEN		0x02000000	/* Interrupt enable */
-#define MCFSLT_SCR_TEN		0x01000000	/* Timer enable */
-
-/*
- *	Bit definitions for the SSR status register.
- */
-#define MCFSLT_SSR_BE		0x02000000	/* Bus error condition */
-#define MCFSLT_SSR_TE		0x01000000	/* Timeout condition */
-
-/****************************************************************************/
-#endif	/* mcfslt_h */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/mcftimer.h b/ANDROID_3.4.5/arch/m68k/include/asm/mcftimer.h
deleted file mode 100644
index 351c2723..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/mcftimer.h
+++ /dev/null
@@ -1,57 +0,0 @@
-/****************************************************************************/
-
-/*
- *	mcftimer.h -- ColdFire internal TIMER support defines.
- *
- *	(C) Copyright 1999-2006, Greg Ungerer <gerg@snapgear.com>
- * 	(C) Copyright 2000, Lineo Inc. (www.lineo.com) 
- */
-
-/****************************************************************************/
-#ifndef	mcftimer_h
-#define	mcftimer_h
-/****************************************************************************/
-
-/*
- *	Define the TIMER register set addresses.
- */
-#define	MCFTIMER_TMR		0x00		/* Timer Mode reg (r/w) */
-#define	MCFTIMER_TRR		0x04		/* Timer Reference (r/w) */
-#define	MCFTIMER_TCR		0x08		/* Timer Capture reg (r/w) */
-#define	MCFTIMER_TCN		0x0C		/* Timer Counter reg (r/w) */
-#if defined(CONFIG_M532x)
-#define	MCFTIMER_TER		0x03		/* Timer Event reg (r/w) */
-#else
-#define	MCFTIMER_TER		0x11		/* Timer Event reg (r/w) */
-#endif
-
-/*
- *	Bit definitions for the Timer Mode Register (TMR).
- *	Register bit flags are common across ColdFires.
- */
-#define	MCFTIMER_TMR_PREMASK	0xff00		/* Prescalar mask */
-#define	MCFTIMER_TMR_DISCE	0x0000		/* Disable capture */
-#define	MCFTIMER_TMR_ANYCE	0x00c0		/* Capture any edge */
-#define	MCFTIMER_TMR_FALLCE	0x0080		/* Capture fallingedge */
-#define	MCFTIMER_TMR_RISECE	0x0040		/* Capture rising edge */
-#define	MCFTIMER_TMR_ENOM	0x0020		/* Enable output toggle */
-#define	MCFTIMER_TMR_DISOM	0x0000		/* Do single output pulse  */
-#define	MCFTIMER_TMR_ENORI	0x0010		/* Enable ref interrupt */
-#define	MCFTIMER_TMR_DISORI	0x0000		/* Disable ref interrupt */
-#define	MCFTIMER_TMR_RESTART	0x0008		/* Restart counter */
-#define	MCFTIMER_TMR_FREERUN	0x0000		/* Free running counter */
-#define	MCFTIMER_TMR_CLKTIN	0x0006		/* Input clock is TIN */
-#define	MCFTIMER_TMR_CLK16	0x0004		/* Input clock is /16 */
-#define	MCFTIMER_TMR_CLK1	0x0002		/* Input clock is /1 */
-#define	MCFTIMER_TMR_CLKSTOP	0x0000		/* Stop counter */
-#define	MCFTIMER_TMR_ENABLE	0x0001		/* Enable timer */
-#define	MCFTIMER_TMR_DISABLE	0x0000		/* Disable timer */
-
-/*
- *	Bit definitions for the Timer Event Registers (TER).
- */
-#define	MCFTIMER_TER_CAP	0x01		/* Capture event */
-#define	MCFTIMER_TER_REF	0x02		/* Refernece event */
-
-/****************************************************************************/
-#endif	/* mcftimer_h */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/mcfuart.h b/ANDROID_3.4.5/arch/m68k/include/asm/mcfuart.h
deleted file mode 100644
index 2d3bc774..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/mcfuart.h
+++ /dev/null
@@ -1,188 +0,0 @@
-/****************************************************************************/
-
-/*
- *	mcfuart.h -- ColdFire internal UART support defines.
- *
- *	(C) Copyright 1999-2003, Greg Ungerer (gerg@snapgear.com)
- * 	(C) Copyright 2000, Lineo Inc. (www.lineo.com) 
- */
-
-/****************************************************************************/
-#ifndef	mcfuart_h
-#define	mcfuart_h
-/****************************************************************************/
-
-#include <linux/serial_core.h>
-#include <linux/platform_device.h>
-
-struct mcf_platform_uart {
-	unsigned long	mapbase;	/* Physical address base */
-	void __iomem	*membase;	/* Virtual address if mapped */
-	unsigned int	irq;		/* Interrupt vector */
-	unsigned int	uartclk;	/* UART clock rate */
-};
-
-/*
- *	Define the ColdFire UART register set addresses.
- */
-#define	MCFUART_UMR		0x00		/* Mode register (r/w) */
-#define	MCFUART_USR		0x04		/* Status register (r) */
-#define	MCFUART_UCSR		0x04		/* Clock Select (w) */
-#define	MCFUART_UCR		0x08		/* Command register (w) */
-#define	MCFUART_URB		0x0c		/* Receiver Buffer (r) */
-#define	MCFUART_UTB		0x0c		/* Transmit Buffer (w) */
-#define	MCFUART_UIPCR		0x10		/* Input Port Change (r) */
-#define	MCFUART_UACR		0x10		/* Auxiliary Control (w) */
-#define	MCFUART_UISR		0x14		/* Interrupt Status (r) */
-#define	MCFUART_UIMR		0x14		/* Interrupt Mask (w) */
-#define	MCFUART_UBG1		0x18		/* Baud Rate MSB (r/w) */
-#define	MCFUART_UBG2		0x1c		/* Baud Rate LSB (r/w) */
-#ifdef	CONFIG_M5272
-#define	MCFUART_UTF		0x28		/* Transmitter FIFO (r/w) */
-#define	MCFUART_URF		0x2c		/* Receiver FIFO (r/w) */
-#define	MCFUART_UFPD		0x30		/* Frac Prec. Divider (r/w) */
-#endif
-#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || \
-        defined(CONFIG_M5249) || defined(CONFIG_M5307) || \
-        defined(CONFIG_M5407)
-#define	MCFUART_UIVR		0x30		/* Interrupt Vector (r/w) */
-#endif
-#define	MCFUART_UIPR		0x34		/* Input Port (r) */
-#define	MCFUART_UOP1		0x38		/* Output Port Bit Set (w) */
-#define	MCFUART_UOP0		0x3c		/* Output Port Bit Reset (w) */
-
-
-/*
- *	Define bit flags in Mode Register 1 (MR1).
- */
-#define	MCFUART_MR1_RXRTS	0x80		/* Auto RTS flow control */
-#define	MCFUART_MR1_RXIRQFULL	0x40		/* RX IRQ type FULL */
-#define	MCFUART_MR1_RXIRQRDY	0x00		/* RX IRQ type RDY */
-#define	MCFUART_MR1_RXERRBLOCK	0x20		/* RX block error mode */
-#define	MCFUART_MR1_RXERRCHAR	0x00		/* RX char error mode */
-
-#define	MCFUART_MR1_PARITYNONE	0x10		/* No parity */
-#define	MCFUART_MR1_PARITYEVEN	0x00		/* Even parity */
-#define	MCFUART_MR1_PARITYODD	0x04		/* Odd parity */
-#define	MCFUART_MR1_PARITYSPACE	0x08		/* Space parity */
-#define	MCFUART_MR1_PARITYMARK	0x0c		/* Mark parity */
-
-#define	MCFUART_MR1_CS5		0x00		/* 5 bits per char */
-#define	MCFUART_MR1_CS6		0x01		/* 6 bits per char */
-#define	MCFUART_MR1_CS7		0x02		/* 7 bits per char */
-#define	MCFUART_MR1_CS8		0x03		/* 8 bits per char */
-
-/*
- *	Define bit flags in Mode Register 2 (MR2).
- */
-#define	MCFUART_MR2_LOOPBACK	0x80		/* Loopback mode */
-#define	MCFUART_MR2_REMOTELOOP	0xc0		/* Remote loopback mode */
-#define	MCFUART_MR2_AUTOECHO	0x40		/* Automatic echo */
-#define	MCFUART_MR2_TXRTS	0x20		/* Assert RTS on TX */
-#define	MCFUART_MR2_TXCTS	0x10		/* Auto CTS flow control */
-
-#define	MCFUART_MR2_STOP1	0x07		/* 1 stop bit */
-#define	MCFUART_MR2_STOP15	0x08		/* 1.5 stop bits */
-#define	MCFUART_MR2_STOP2	0x0f		/* 2 stop bits */
-
-/*
- *	Define bit flags in Status Register (USR).
- */
-#define	MCFUART_USR_RXBREAK	0x80		/* Received BREAK */
-#define	MCFUART_USR_RXFRAMING	0x40		/* Received framing error */
-#define	MCFUART_USR_RXPARITY	0x20		/* Received parity error */
-#define	MCFUART_USR_RXOVERRUN	0x10		/* Received overrun error */
-#define	MCFUART_USR_TXEMPTY	0x08		/* Transmitter empty */
-#define	MCFUART_USR_TXREADY	0x04		/* Transmitter ready */
-#define	MCFUART_USR_RXFULL	0x02		/* Receiver full */
-#define	MCFUART_USR_RXREADY	0x01		/* Receiver ready */
-
-#define	MCFUART_USR_RXERR	(MCFUART_USR_RXBREAK | MCFUART_USR_RXFRAMING | \
-				MCFUART_USR_RXPARITY | MCFUART_USR_RXOVERRUN)
-
-/*
- *	Define bit flags in Clock Select Register (UCSR).
- */
-#define	MCFUART_UCSR_RXCLKTIMER	0xd0		/* RX clock is timer */
-#define	MCFUART_UCSR_RXCLKEXT16	0xe0		/* RX clock is external x16 */
-#define	MCFUART_UCSR_RXCLKEXT1	0xf0		/* RX clock is external x1 */
-
-#define	MCFUART_UCSR_TXCLKTIMER	0x0d		/* TX clock is timer */
-#define	MCFUART_UCSR_TXCLKEXT16	0x0e		/* TX clock is external x16 */
-#define	MCFUART_UCSR_TXCLKEXT1	0x0f		/* TX clock is external x1 */
-
-/*
- *	Define bit flags in Command Register (UCR).
- */
-#define	MCFUART_UCR_CMDNULL		0x00	/* No command */
-#define	MCFUART_UCR_CMDRESETMRPTR	0x10	/* Reset MR pointer */
-#define	MCFUART_UCR_CMDRESETRX		0x20	/* Reset receiver */
-#define	MCFUART_UCR_CMDRESETTX		0x30	/* Reset transmitter */
-#define	MCFUART_UCR_CMDRESETERR		0x40	/* Reset error status */
-#define	MCFUART_UCR_CMDRESETBREAK	0x50	/* Reset BREAK change */
-#define	MCFUART_UCR_CMDBREAKSTART	0x60	/* Start BREAK */
-#define	MCFUART_UCR_CMDBREAKSTOP	0x70	/* Stop BREAK */
-
-#define	MCFUART_UCR_TXNULL	0x00		/* No TX command */
-#define	MCFUART_UCR_TXENABLE	0x04		/* Enable TX */
-#define	MCFUART_UCR_TXDISABLE	0x08		/* Disable TX */
-#define	MCFUART_UCR_RXNULL	0x00		/* No RX command */
-#define	MCFUART_UCR_RXENABLE	0x01		/* Enable RX */
-#define	MCFUART_UCR_RXDISABLE	0x02		/* Disable RX */
-
-/*
- *	Define bit flags in Input Port Change Register (UIPCR).
- */
-#define	MCFUART_UIPCR_CTSCOS	0x10		/* CTS change of state */
-#define	MCFUART_UIPCR_CTS	0x01		/* CTS value */
-
-/*
- *	Define bit flags in Input Port Register (UIP).
- */
-#define	MCFUART_UIPR_CTS	0x01		/* CTS value */
-
-/*
- *	Define bit flags in Output Port Registers (UOP).
- *	Clear bit by writing to UOP0, set by writing to UOP1.
- */
-#define	MCFUART_UOP_RTS		0x01		/* RTS set or clear */
-
-/*
- *	Define bit flags in the Auxiliary Control Register (UACR).
- */
-#define	MCFUART_UACR_IEC	0x01		/* Input enable control */
-
-/*
- *	Define bit flags in Interrupt Status Register (UISR).
- *	These same bits are used for the Interrupt Mask Register (UIMR).
- */
-#define	MCFUART_UIR_COS		0x80		/* Change of state (CTS) */
-#define	MCFUART_UIR_DELTABREAK	0x04		/* Break start or stop */
-#define	MCFUART_UIR_RXREADY	0x02		/* Receiver ready */
-#define	MCFUART_UIR_TXREADY	0x01		/* Transmitter ready */
-
-#ifdef	CONFIG_M5272
-/*
- *	Define bit flags in the Transmitter FIFO Register (UTF).
- */
-#define	MCFUART_UTF_TXB		0x1f		/* Transmitter data level */
-#define	MCFUART_UTF_FULL	0x20		/* Transmitter fifo full */
-#define	MCFUART_UTF_TXS		0xc0		/* Transmitter status */
-
-/*
- *	Define bit flags in the Receiver FIFO Register (URF).
- */
-#define	MCFUART_URF_RXB		0x1f		/* Receiver data level */
-#define	MCFUART_URF_FULL	0x20		/* Receiver fifo full */
-#define	MCFUART_URF_RXS		0xc0		/* Receiver status */
-#endif
-
-#if defined(CONFIG_M54xx)
-#define MCFUART_TXFIFOSIZE	512
-#elif defined(CONFIG_M5272)
-#define MCFUART_TXFIFOSIZE	25
-#else
-#define MCFUART_TXFIFOSIZE	1
-#endif
-/****************************************************************************/
-#endif	/* mcfuart_h */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/mcfwdebug.h b/ANDROID_3.4.5/arch/m68k/include/asm/mcfwdebug.h
deleted file mode 100644
index 27f70e45..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/mcfwdebug.h
+++ /dev/null
@@ -1,118 +0,0 @@
-/****************************************************************************/
-
-/*
- *	mcfdebug.h -- ColdFire Debug Module support.
- *
- * 	(C) Copyright 2001, Lineo Inc. (www.lineo.com) 
- */
-
-/****************************************************************************/
-#ifndef mcfdebug_h
-#define mcfdebug_h
-/****************************************************************************/
-
-/* Define the debug module registers */
-#define MCFDEBUG_CSR	0x0			/* Configuration status		*/
-#define MCFDEBUG_BAAR	0x5			/* BDM address attribute	*/
-#define MCFDEBUG_AATR	0x6			/* Address attribute trigger	*/
-#define MCFDEBUG_TDR	0x7			/* Trigger definition		*/
-#define MCFDEBUG_PBR	0x8			/* PC breakpoint		*/
-#define MCFDEBUG_PBMR	0x9			/* PC breakpoint mask		*/
-#define MCFDEBUG_ABHR	0xc			/* High address breakpoint	*/
-#define MCFDEBUG_ABLR	0xd			/* Low address breakpoint	*/
-#define MCFDEBUG_DBR	0xe			/* Data breakpoint		*/
-#define MCFDEBUG_DBMR	0xf			/* Data breakpoint mask		*/
-
-/* Define some handy constants for the trigger definition register */
-#define MCFDEBUG_TDR_TRC_DISP	0x00000000	/* display on DDATA only	*/
-#define MCFDEBUG_TDR_TRC_HALT	0x40000000	/* Processor halt on BP		*/
-#define MCFDEBUG_TDR_TRC_INTR	0x80000000	/* Debug intr on BP		*/
-#define MCFDEBUG_TDR_LXT1	0x00004000	/* TDR level 1			*/
-#define MCFDEBUG_TDR_LXT2	0x00008000	/* TDR level 2			*/
-#define MCFDEBUG_TDR_EBL1	0x00002000	/* Enable breakpoint level 1	*/
-#define MCFDEBUG_TDR_EBL2	0x20000000	/* Enable breakpoint level 2	*/
-#define MCFDEBUG_TDR_EDLW1	0x00001000	/* Enable data BP longword	*/
-#define MCFDEBUG_TDR_EDLW2	0x10000000
-#define MCFDEBUG_TDR_EDWL1	0x00000800	/* Enable data BP lower word	*/
-#define MCFDEBUG_TDR_EDWL2	0x08000000
-#define MCFDEBUG_TDR_EDWU1	0x00000400	/* Enable data BP upper word	*/
-#define MCFDEBUG_TDR_EDWU2	0x04000000
-#define MCFDEBUG_TDR_EDLL1	0x00000200	/* Enable data BP low low byte	*/
-#define MCFDEBUG_TDR_EDLL2	0x02000000
-#define MCFDEBUG_TDR_EDLM1	0x00000100	/* Enable data BP low mid byte	*/
-#define MCFDEBUG_TDR_EDLM2	0x01000000
-#define MCFDEBUG_TDR_EDUM1	0x00000080	/* Enable data BP up mid byte	*/
-#define MCFDEBUG_TDR_EDUM2	0x00800000
-#define MCFDEBUG_TDR_EDUU1	0x00000040	/* Enable data BP up up byte	*/
-#define MCFDEBUG_TDR_EDUU2	0x00400000
-#define MCFDEBUG_TDR_DI1	0x00000020	/* Data BP invert		*/
-#define MCFDEBUG_TDR_DI2	0x00200000
-#define MCFDEBUG_TDR_EAI1	0x00000010	/* Enable address BP inverted	*/
-#define MCFDEBUG_TDR_EAI2	0x00100000
-#define MCFDEBUG_TDR_EAR1	0x00000008	/* Enable address BP range	*/
-#define MCFDEBUG_TDR_EAR2	0x00080000
-#define MCFDEBUG_TDR_EAL1	0x00000004	/* Enable address BP low	*/
-#define MCFDEBUG_TDR_EAL2	0x00040000
-#define MCFDEBUG_TDR_EPC1	0x00000002	/* Enable PC BP			*/
-#define MCFDEBUG_TDR_EPC2	0x00020000
-#define MCFDEBUG_TDR_PCI1	0x00000001	/* PC BP invert			*/
-#define MCFDEBUG_TDR_PCI2	0x00010000
-
-/* Constants for the address attribute trigger register */
-#define MCFDEBUG_AAR_RESET	0x00000005
-/* Fields not yet implemented */
-
-/* And some definitions for the writable sections of the CSR */
-#define MCFDEBUG_CSR_RESET	0x00100000
-#define MCFDEBUG_CSR_PSTCLK	0x00020000	/* PSTCLK disable		*/
-#define MCFDEBUG_CSR_IPW	0x00010000	/* Inhibit processor writes	*/
-#define MCFDEBUG_CSR_MAP	0x00008000	/* Processor refs in emul mode	*/
-#define MCFDEBUG_CSR_TRC	0x00004000	/* Emul mode on trace exception	*/
-#define MCFDEBUG_CSR_EMU	0x00002000	/* Force emulation mode		*/
-#define MCFDEBUG_CSR_DDC_READ	0x00000800	/* Debug data control		*/
-#define MCFDEBUG_CSR_DDC_WRITE	0x00001000
-#define MCFDEBUG_CSR_UHE	0x00000400	/* User mode halt enable	*/
-#define MCFDEBUG_CSR_BTB0	0x00000000	/* Branch target 0 bytes	*/
-#define MCFDEBUG_CSR_BTB2	0x00000100	/* Branch target 2 bytes	*/
-#define MCFDEBUG_CSR_BTB3	0x00000200	/* Branch target 3 bytes	*/
-#define MCFDEBUG_CSR_BTB4	0x00000300	/* Branch target 4 bytes	*/
-#define MCFDEBUG_CSR_NPL	0x00000040	/* Non-pipelined mode		*/
-#define MCFDEBUG_CSR_SSM	0x00000010	/* Single step mode		*/
-
-/* Constants for the BDM address attribute register */
-#define MCFDEBUG_BAAR_RESET	0x00000005
-/* Fields not yet implemented */
-
-
-/* This routine wrappers up the wdebug asm instruction so that the register
- * and value can be relatively easily specified.  The biggest hassle here is
- * that the debug module instructions (2 longs) must be long word aligned and
- * some pointer fiddling is performed to ensure this.
- */
-static inline void wdebug(int reg, unsigned long data) {
-	unsigned short dbg_spc[6];
-	unsigned short *dbg;
-
-	// Force alignment to long word boundary
-	dbg = (unsigned short *)((((unsigned long)dbg_spc) + 3) & 0xfffffffc);
-
-	// Build up the debug instruction
-	dbg[0] = 0x2c80 | (reg & 0xf);
-	dbg[1] = (data >> 16) & 0xffff;
-	dbg[2] = data & 0xffff;
-	dbg[3] = 0;
-
-	// Perform the wdebug instruction
-#if 0
-	// This strain is for gas which doesn't have the wdebug instructions defined
-	asm(	"move.l	%0, %%a0\n\t"
-		".word	0xfbd0\n\t"
-		".word	0x0003\n\t"
-	    :: "g" (dbg) : "a0");
-#else
-	// And this is for when it does
-	asm(	"wdebug	(%0)" :: "a" (dbg));
-#endif
-}
-
-#endif
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/mman.h b/ANDROID_3.4.5/arch/m68k/include/asm/mman.h
deleted file mode 100644
index 8eebf89f..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/mman.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/mman.h>
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/mmu.h b/ANDROID_3.4.5/arch/m68k/include/asm/mmu.h
deleted file mode 100644
index 8a11a63e..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/mmu.h
+++ /dev/null
@@ -1,13 +0,0 @@
-#ifndef __MMU_H
-#define __MMU_H
-
-#ifdef CONFIG_MMU
-/* Default "unsigned long" context */
-typedef unsigned long mm_context_t;
-#else
-typedef struct {
-	unsigned long		end_brk;
-} mm_context_t;
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/mmu_context.h b/ANDROID_3.4.5/arch/m68k/include/asm/mmu_context.h
deleted file mode 100644
index dc3be991..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/mmu_context.h
+++ /dev/null
@@ -1,327 +0,0 @@
-#ifndef __M68K_MMU_CONTEXT_H
-#define __M68K_MMU_CONTEXT_H
-
-#include <asm-generic/mm_hooks.h>
-
-static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
-{
-}
-
-#ifdef CONFIG_MMU
-
-#if defined(CONFIG_COLDFIRE)
-
-#include <asm/atomic.h>
-#include <asm/bitops.h>
-#include <asm/mcfmmu.h>
-#include <asm/mmu.h>
-
-#define NO_CONTEXT		256
-#define LAST_CONTEXT		255
-#define FIRST_CONTEXT		1
-
-extern unsigned long context_map[];
-extern mm_context_t next_mmu_context;
-
-extern atomic_t nr_free_contexts;
-extern struct mm_struct *context_mm[LAST_CONTEXT+1];
-extern void steal_context(void);
-
-static inline void get_mmu_context(struct mm_struct *mm)
-{
-	mm_context_t ctx;
-
-	if (mm->context != NO_CONTEXT)
-		return;
-	while (atomic_dec_and_test_lt(&nr_free_contexts)) {
-		atomic_inc(&nr_free_contexts);
-		steal_context();
-	}
-	ctx = next_mmu_context;
-	while (test_and_set_bit(ctx, context_map)) {
-		ctx = find_next_zero_bit(context_map, LAST_CONTEXT+1, ctx);
-		if (ctx > LAST_CONTEXT)
-			ctx = 0;
-	}
-	next_mmu_context = (ctx + 1) & LAST_CONTEXT;
-	mm->context = ctx;
-	context_mm[ctx] = mm;
-}
-
-/*
- * Set up the context for a new address space.
- */
-#define init_new_context(tsk, mm)	(((mm)->context = NO_CONTEXT), 0)
-
-/*
- * We're finished using the context for an address space.
- */
-static inline void destroy_context(struct mm_struct *mm)
-{
-	if (mm->context != NO_CONTEXT) {
-		clear_bit(mm->context, context_map);
-		mm->context = NO_CONTEXT;
-		atomic_inc(&nr_free_contexts);
-	}
-}
-
-static inline void set_context(mm_context_t context, pgd_t *pgd)
-{
-	__asm__ __volatile__ ("movec %0,%%asid" : : "d" (context));
-}
-
-static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
-	struct task_struct *tsk)
-{
-	get_mmu_context(tsk->mm);
-	set_context(tsk->mm->context, next->pgd);
-}
-
-/*
- * After we have set current->mm to a new value, this activates
- * the context for the new mm so we see the new mappings.
- */
-static inline void activate_mm(struct mm_struct *active_mm,
-	struct mm_struct *mm)
-{
-	get_mmu_context(mm);
-	set_context(mm->context, mm->pgd);
-}
-
-#define deactivate_mm(tsk, mm) do { } while (0)
-
-extern void mmu_context_init(void);
-#define prepare_arch_switch(next) load_ksp_mmu(next)
-
-static inline void load_ksp_mmu(struct task_struct *task)
-{
-	unsigned long flags;
-	struct mm_struct *mm;
-	int asid;
-	pgd_t *pgd;
-	pmd_t *pmd;
-	pte_t *pte;
-	unsigned long mmuar;
-
-	local_irq_save(flags);
-	mmuar = task->thread.ksp;
-
-	/* Search for a valid TLB entry, if one is found, don't remap */
-	mmu_write(MMUAR, mmuar);
-	mmu_write(MMUOR, MMUOR_STLB | MMUOR_ADR);
-	if (mmu_read(MMUSR) & MMUSR_HIT)
-		goto end;
-
-	if (mmuar >= PAGE_OFFSET) {
-		mm = &init_mm;
-	} else {
-		pr_info("load_ksp_mmu: non-kernel mm found: 0x%p\n", task->mm);
-		mm = task->mm;
-	}
-
-	if (!mm)
-		goto bug;
-
-	pgd = pgd_offset(mm, mmuar);
-	if (pgd_none(*pgd))
-		goto bug;
-
-	pmd = pmd_offset(pgd, mmuar);
-	if (pmd_none(*pmd))
-		goto bug;
-
-	pte = (mmuar >= PAGE_OFFSET) ? pte_offset_kernel(pmd, mmuar)
-				     : pte_offset_map(pmd, mmuar);
-	if (pte_none(*pte) || !pte_present(*pte))
-		goto bug;
-
-	set_pte(pte, pte_mkyoung(*pte));
-	asid = mm->context & 0xff;
-	if (!pte_dirty(*pte) && mmuar <= PAGE_OFFSET)
-		set_pte(pte, pte_wrprotect(*pte));
-
-	mmu_write(MMUTR, (mmuar & PAGE_MASK) | (asid << MMUTR_IDN) |
-		(((int)(pte->pte) & (int)CF_PAGE_MMUTR_MASK)
-		>> CF_PAGE_MMUTR_SHIFT) | MMUTR_V);
-
-	mmu_write(MMUDR, (pte_val(*pte) & PAGE_MASK) |
-		((pte->pte) & CF_PAGE_MMUDR_MASK) | MMUDR_SZ_8KB | MMUDR_X);
-
-	mmu_write(MMUOR, MMUOR_ACC | MMUOR_UAA);
-
-	goto end;
-
-bug:
-	pr_info("ksp load failed: mm=0x%p ksp=0x08%lx\n", mm, mmuar);
-end:
-	local_irq_restore(flags);
-}
-
-#elif defined(CONFIG_SUN3)
-#include <asm/sun3mmu.h>
-#include <linux/sched.h>
-
-extern unsigned long get_free_context(struct mm_struct *mm);
-extern void clear_context(unsigned long context);
-
-/* set the context for a new task to unmapped */
-static inline int init_new_context(struct task_struct *tsk,
-				   struct mm_struct *mm)
-{
-	mm->context = SUN3_INVALID_CONTEXT;
-	return 0;
-}
-
-/* find the context given to this process, and if it hasn't already
-   got one, go get one for it. */
-static inline void get_mmu_context(struct mm_struct *mm)
-{
-	if (mm->context == SUN3_INVALID_CONTEXT)
-		mm->context = get_free_context(mm);
-}
-
-/* flush context if allocated... */
-static inline void destroy_context(struct mm_struct *mm)
-{
-	if (mm->context != SUN3_INVALID_CONTEXT)
-		clear_context(mm->context);
-}
-
-static inline void activate_context(struct mm_struct *mm)
-{
-	get_mmu_context(mm);
-	sun3_put_context(mm->context);
-}
-
-static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
-			     struct task_struct *tsk)
-{
-	activate_context(tsk->mm);
-}
-
-#define deactivate_mm(tsk, mm)	do { } while (0)
-
-static inline void activate_mm(struct mm_struct *prev_mm,
-			       struct mm_struct *next_mm)
-{
-	activate_context(next_mm);
-}
-
-#else
-
-#include <asm/setup.h>
-#include <asm/page.h>
-#include <asm/pgalloc.h>
-
-static inline int init_new_context(struct task_struct *tsk,
-				   struct mm_struct *mm)
-{
-	mm->context = virt_to_phys(mm->pgd);
-	return 0;
-}
-
-#define destroy_context(mm)		do { } while(0)
-
-static inline void switch_mm_0230(struct mm_struct *mm)
-{
-	unsigned long crp[2] = {
-		0x80000000 | _PAGE_TABLE, mm->context
-	};
-	unsigned long tmp;
-
-	asm volatile (".chip 68030");
-
-	/* flush MC68030/MC68020 caches (they are virtually addressed) */
-	asm volatile (
-		"movec %%cacr,%0;"
-		"orw %1,%0; "
-		"movec %0,%%cacr"
-		: "=d" (tmp) : "di" (FLUSH_I_AND_D));
-
-	/* Switch the root pointer. For a 030-only kernel,
-	 * avoid flushing the whole ATC, we only need to
-	 * flush the user entries. The 68851 does this by
-	 * itself. Avoid a runtime check here.
-	 */
-	asm volatile (
-#ifdef CPU_M68030_ONLY
-		"pmovefd %0,%%crp; "
-		"pflush #0,#4"
-#else
-		"pmove %0,%%crp"
-#endif
-		: : "m" (crp[0]));
-
-	asm volatile (".chip 68k");
-}
-
-static inline void switch_mm_0460(struct mm_struct *mm)
-{
-	asm volatile (".chip 68040");
-
-	/* flush address translation cache (user entries) */
-	asm volatile ("pflushan");
-
-	/* switch the root pointer */
-	asm volatile ("movec %0,%%urp" : : "r" (mm->context));
-
-	if (CPU_IS_060) {
-		unsigned long tmp;
-
-		/* clear user entries in the branch cache */
-		asm volatile (
-			"movec %%cacr,%0; "
-		        "orl %1,%0; "
-		        "movec %0,%%cacr"
-			: "=d" (tmp): "di" (0x00200000));
-	}
-
-	asm volatile (".chip 68k");
-}
-
-static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, struct task_struct *tsk)
-{
-	if (prev != next) {
-		if (CPU_IS_020_OR_030)
-			switch_mm_0230(next);
-		else
-			switch_mm_0460(next);
-	}
-}
-
-#define deactivate_mm(tsk,mm)	do { } while (0)
-
-static inline void activate_mm(struct mm_struct *prev_mm,
-			       struct mm_struct *next_mm)
-{
-	next_mm->context = virt_to_phys(next_mm->pgd);
-
-	if (CPU_IS_020_OR_030)
-		switch_mm_0230(next_mm);
-	else
-		switch_mm_0460(next_mm);
-}
-
-#endif
-
-#else /* !CONFIG_MMU */
-
-static inline int init_new_context(struct task_struct *tsk, struct mm_struct *mm)
-{
-	return 0;
-}
-
-
-static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, struct task_struct *tsk)
-{
-}
-
-#define destroy_context(mm)	do { } while (0)
-#define deactivate_mm(tsk,mm)	do { } while (0)
-
-static inline void activate_mm(struct mm_struct *prev_mm, struct mm_struct *next_mm)
-{
-}
-
-#endif /* CONFIG_MMU */
-#endif /* __M68K_MMU_CONTEXT_H */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/mmzone.h b/ANDROID_3.4.5/arch/m68k/include/asm/mmzone.h
deleted file mode 100644
index e1f1ec7b..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/mmzone.h
+++ /dev/null
@@ -1,9 +0,0 @@
-#ifndef _ASM_M68K_MMZONE_H_
-#define _ASM_M68K_MMZONE_H_
-
-extern pg_data_t pg_data_map[];
-
-#define NODE_DATA(nid)		(&pg_data_map[nid])
-#define NODE_MEM_MAP(nid)	(NODE_DATA(nid)->node_mem_map)
-
-#endif /* _ASM_M68K_MMZONE_H_ */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/module.h b/ANDROID_3.4.5/arch/m68k/include/asm/module.h
deleted file mode 100644
index edffe66b..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/module.h
+++ /dev/null
@@ -1,43 +0,0 @@
-#ifndef _ASM_M68K_MODULE_H
-#define _ASM_M68K_MODULE_H
-
-enum m68k_fixup_type {
-	m68k_fixup_memoffset,
-	m68k_fixup_vnode_shift,
-};
-
-struct m68k_fixup_info {
-	enum m68k_fixup_type type;
-	void *addr;
-};
-
-struct mod_arch_specific {
-	struct m68k_fixup_info *fixup_start, *fixup_end;
-};
-
-#ifdef CONFIG_MMU
-
-#define MODULE_ARCH_INIT {				\
-	.fixup_start		= __start_fixup,	\
-	.fixup_end		= __stop_fixup,		\
-}
-
-
-#define m68k_fixup(type, addr)			\
-	"	.section \".m68k_fixup\",\"aw\"\n"	\
-	"	.long " #type "," #addr "\n"	\
-	"	.previous\n"
-
-#endif /* CONFIG_MMU */
-
-extern struct m68k_fixup_info __start_fixup[], __stop_fixup[];
-
-struct module;
-extern void module_fixup(struct module *mod, struct m68k_fixup_info *start,
-			 struct m68k_fixup_info *end);
-
-#define Elf_Shdr Elf32_Shdr
-#define Elf_Sym Elf32_Sym
-#define Elf_Ehdr Elf32_Ehdr
-
-#endif /* _ASM_M68K_MODULE_H */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/motorola_pgalloc.h b/ANDROID_3.4.5/arch/m68k/include/asm/motorola_pgalloc.h
deleted file mode 100644
index 2f02f264..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/motorola_pgalloc.h
+++ /dev/null
@@ -1,109 +0,0 @@
-#ifndef _MOTOROLA_PGALLOC_H
-#define _MOTOROLA_PGALLOC_H
-
-#include <asm/tlb.h>
-#include <asm/tlbflush.h>
-
-extern pmd_t *get_pointer_table(void);
-extern int free_pointer_table(pmd_t *);
-
-static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long address)
-{
-	pte_t *pte;
-
-	pte = (pte_t *)__get_free_page(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO);
-	if (pte) {
-		__flush_page_to_ram(pte);
-		flush_tlb_kernel_page(pte);
-		nocache_page(pte);
-	}
-
-	return pte;
-}
-
-static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte)
-{
-	cache_page(pte);
-	free_page((unsigned long) pte);
-}
-
-static inline pgtable_t pte_alloc_one(struct mm_struct *mm, unsigned long address)
-{
-	struct page *page = alloc_pages(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO, 0);
-	pte_t *pte;
-
-	if(!page)
-		return NULL;
-
-	pte = kmap(page);
-	__flush_page_to_ram(pte);
-	flush_tlb_kernel_page(pte);
-	nocache_page(pte);
-	kunmap(page);
-	pgtable_page_ctor(page);
-	return page;
-}
-
-static inline void pte_free(struct mm_struct *mm, pgtable_t page)
-{
-	pgtable_page_dtor(page);
-	cache_page(kmap(page));
-	kunmap(page);
-	__free_page(page);
-}
-
-static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t page,
-				  unsigned long address)
-{
-	pgtable_page_dtor(page);
-	cache_page(kmap(page));
-	kunmap(page);
-	__free_page(page);
-}
-
-
-static inline pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long address)
-{
-	return get_pointer_table();
-}
-
-static inline int pmd_free(struct mm_struct *mm, pmd_t *pmd)
-{
-	return free_pointer_table(pmd);
-}
-
-static inline int __pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd,
-				 unsigned long address)
-{
-	return free_pointer_table(pmd);
-}
-
-
-static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd)
-{
-	pmd_free(mm, (pmd_t *)pgd);
-}
-
-static inline pgd_t *pgd_alloc(struct mm_struct *mm)
-{
-	return (pgd_t *)get_pointer_table();
-}
-
-
-static inline void pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmd, pte_t *pte)
-{
-	pmd_set(pmd, pte);
-}
-
-static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd, pgtable_t page)
-{
-	pmd_set(pmd, page_address(page));
-}
-#define pmd_pgtable(pmd) pmd_page(pmd)
-
-static inline void pgd_populate(struct mm_struct *mm, pgd_t *pgd, pmd_t *pmd)
-{
-	pgd_set(pgd, pmd);
-}
-
-#endif /* _MOTOROLA_PGALLOC_H */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/motorola_pgtable.h b/ANDROID_3.4.5/arch/m68k/include/asm/motorola_pgtable.h
deleted file mode 100644
index e0fdd4d0..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/motorola_pgtable.h
+++ /dev/null
@@ -1,290 +0,0 @@
-#ifndef _MOTOROLA_PGTABLE_H
-#define _MOTOROLA_PGTABLE_H
-
-
-/*
- * Definitions for MMU descriptors
- */
-#define _PAGE_PRESENT	0x001
-#define _PAGE_SHORT	0x002
-#define _PAGE_RONLY	0x004
-#define _PAGE_READWRITE	0x000
-#define _PAGE_ACCESSED	0x008
-#define _PAGE_DIRTY	0x010
-#define _PAGE_SUPER	0x080	/* 68040 supervisor only */
-#define _PAGE_GLOBAL040	0x400	/* 68040 global bit, used for kva descs */
-#define _PAGE_NOCACHE030 0x040	/* 68030 no-cache mode */
-#define _PAGE_NOCACHE	0x060	/* 68040 cache mode, non-serialized */
-#define _PAGE_NOCACHE_S	0x040	/* 68040 no-cache mode, serialized */
-#define _PAGE_CACHE040	0x020	/* 68040 cache mode, cachable, copyback */
-#define _PAGE_CACHE040W	0x000	/* 68040 cache mode, cachable, write-through */
-
-#define _DESCTYPE_MASK	0x003
-
-#define _CACHEMASK040	(~0x060)
-#define _TABLE_MASK	(0xfffffe00)
-
-#define _PAGE_TABLE	(_PAGE_SHORT)
-#define _PAGE_CHG_MASK  (PAGE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY | _PAGE_NOCACHE)
-
-#define _PAGE_PROTNONE	0x004
-#define _PAGE_FILE	0x008	/* pagecache or swap? */
-
-#ifndef __ASSEMBLY__
-
-/* This is the cache mode to be used for pages containing page descriptors for
- * processors >= '040. It is in pte_mknocache(), and the variable is defined
- * and initialized in head.S */
-extern int m68k_pgtable_cachemode;
-
-/* This is the cache mode for normal pages, for supervisor access on
- * processors >= '040. It is used in pte_mkcache(), and the variable is
- * defined and initialized in head.S */
-
-#if defined(CPU_M68060_ONLY) && defined(CONFIG_060_WRITETHROUGH)
-#define m68k_supervisor_cachemode _PAGE_CACHE040W
-#elif defined(CPU_M68040_OR_M68060_ONLY)
-#define m68k_supervisor_cachemode _PAGE_CACHE040
-#elif defined(CPU_M68020_OR_M68030_ONLY)
-#define m68k_supervisor_cachemode 0
-#else
-extern int m68k_supervisor_cachemode;
-#endif
-
-#if defined(CPU_M68040_OR_M68060_ONLY)
-#define mm_cachebits _PAGE_CACHE040
-#elif defined(CPU_M68020_OR_M68030_ONLY)
-#define mm_cachebits 0
-#else
-extern unsigned long mm_cachebits;
-#endif
-
-#define PAGE_NONE	__pgprot(_PAGE_PROTNONE | _PAGE_ACCESSED | mm_cachebits)
-#define PAGE_SHARED	__pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | mm_cachebits)
-#define PAGE_COPY	__pgprot(_PAGE_PRESENT | _PAGE_RONLY | _PAGE_ACCESSED | mm_cachebits)
-#define PAGE_READONLY	__pgprot(_PAGE_PRESENT | _PAGE_RONLY | _PAGE_ACCESSED | mm_cachebits)
-#define PAGE_KERNEL	__pgprot(_PAGE_PRESENT | _PAGE_DIRTY | _PAGE_ACCESSED | mm_cachebits)
-
-/* Alternate definitions that are compile time constants, for
-   initializing protection_map.  The cachebits are fixed later.  */
-#define PAGE_NONE_C	__pgprot(_PAGE_PROTNONE | _PAGE_ACCESSED)
-#define PAGE_SHARED_C	__pgprot(_PAGE_PRESENT | _PAGE_ACCESSED)
-#define PAGE_COPY_C	__pgprot(_PAGE_PRESENT | _PAGE_RONLY | _PAGE_ACCESSED)
-#define PAGE_READONLY_C	__pgprot(_PAGE_PRESENT | _PAGE_RONLY | _PAGE_ACCESSED)
-
-/*
- * The m68k can't do page protection for execute, and considers that the same are read.
- * Also, write permissions imply read permissions. This is the closest we can get..
- */
-#define __P000	PAGE_NONE_C
-#define __P001	PAGE_READONLY_C
-#define __P010	PAGE_COPY_C
-#define __P011	PAGE_COPY_C
-#define __P100	PAGE_READONLY_C
-#define __P101	PAGE_READONLY_C
-#define __P110	PAGE_COPY_C
-#define __P111	PAGE_COPY_C
-
-#define __S000	PAGE_NONE_C
-#define __S001	PAGE_READONLY_C
-#define __S010	PAGE_SHARED_C
-#define __S011	PAGE_SHARED_C
-#define __S100	PAGE_READONLY_C
-#define __S101	PAGE_READONLY_C
-#define __S110	PAGE_SHARED_C
-#define __S111	PAGE_SHARED_C
-
-/*
- * Conversion functions: convert a page and protection to a page entry,
- * and a page entry and page directory to the page they refer to.
- */
-#define mk_pte(page, pgprot) pfn_pte(page_to_pfn(page), (pgprot))
-
-static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
-{
-	pte_val(pte) = (pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot);
-	return pte;
-}
-
-static inline void pmd_set(pmd_t *pmdp, pte_t *ptep)
-{
-	unsigned long ptbl = virt_to_phys(ptep) | _PAGE_TABLE | _PAGE_ACCESSED;
-	unsigned long *ptr = pmdp->pmd;
-	short i = 16;
-	while (--i >= 0) {
-		*ptr++ = ptbl;
-		ptbl += (sizeof(pte_t)*PTRS_PER_PTE/16);
-	}
-}
-
-static inline void pgd_set(pgd_t *pgdp, pmd_t *pmdp)
-{
-	pgd_val(*pgdp) = _PAGE_TABLE | _PAGE_ACCESSED | __pa(pmdp);
-}
-
-#define __pte_page(pte) ((unsigned long)__va(pte_val(pte) & PAGE_MASK))
-#define __pmd_page(pmd) ((unsigned long)__va(pmd_val(pmd) & _TABLE_MASK))
-#define __pgd_page(pgd) ((unsigned long)__va(pgd_val(pgd) & _TABLE_MASK))
-
-
-#define pte_none(pte)		(!pte_val(pte))
-#define pte_present(pte)	(pte_val(pte) & (_PAGE_PRESENT | _PAGE_PROTNONE))
-#define pte_clear(mm,addr,ptep)		({ pte_val(*(ptep)) = 0; })
-
-#define pte_page(pte)		virt_to_page(__va(pte_val(pte)))
-#define pte_pfn(pte)		(pte_val(pte) >> PAGE_SHIFT)
-#define pfn_pte(pfn, prot)	__pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot))
-
-#define pmd_none(pmd)		(!pmd_val(pmd))
-#define pmd_bad(pmd)		((pmd_val(pmd) & _DESCTYPE_MASK) != _PAGE_TABLE)
-#define pmd_present(pmd)	(pmd_val(pmd) & _PAGE_TABLE)
-#define pmd_clear(pmdp) ({			\
-	unsigned long *__ptr = pmdp->pmd;	\
-	short __i = 16;				\
-	while (--__i >= 0)			\
-		*__ptr++ = 0;			\
-})
-#define pmd_page(pmd)		virt_to_page(__va(pmd_val(pmd)))
-
-
-#define pgd_none(pgd)		(!pgd_val(pgd))
-#define pgd_bad(pgd)		((pgd_val(pgd) & _DESCTYPE_MASK) != _PAGE_TABLE)
-#define pgd_present(pgd)	(pgd_val(pgd) & _PAGE_TABLE)
-#define pgd_clear(pgdp)		({ pgd_val(*pgdp) = 0; })
-#define pgd_page(pgd)		(mem_map + ((unsigned long)(__va(pgd_val(pgd)) - PAGE_OFFSET) >> PAGE_SHIFT))
-
-#define pte_ERROR(e) \
-	printk("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e))
-#define pmd_ERROR(e) \
-	printk("%s:%d: bad pmd %08lx.\n", __FILE__, __LINE__, pmd_val(e))
-#define pgd_ERROR(e) \
-	printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e))
-
-
-/*
- * The following only work if pte_present() is true.
- * Undefined behaviour if not..
- */
-static inline int pte_write(pte_t pte)		{ return !(pte_val(pte) & _PAGE_RONLY); }
-static inline int pte_dirty(pte_t pte)		{ return pte_val(pte) & _PAGE_DIRTY; }
-static inline int pte_young(pte_t pte)		{ return pte_val(pte) & _PAGE_ACCESSED; }
-static inline int pte_file(pte_t pte)		{ return pte_val(pte) & _PAGE_FILE; }
-static inline int pte_special(pte_t pte)	{ return 0; }
-
-static inline pte_t pte_wrprotect(pte_t pte)	{ pte_val(pte) |= _PAGE_RONLY; return pte; }
-static inline pte_t pte_mkclean(pte_t pte)	{ pte_val(pte) &= ~_PAGE_DIRTY; return pte; }
-static inline pte_t pte_mkold(pte_t pte)	{ pte_val(pte) &= ~_PAGE_ACCESSED; return pte; }
-static inline pte_t pte_mkwrite(pte_t pte)	{ pte_val(pte) &= ~_PAGE_RONLY; return pte; }
-static inline pte_t pte_mkdirty(pte_t pte)	{ pte_val(pte) |= _PAGE_DIRTY; return pte; }
-static inline pte_t pte_mkyoung(pte_t pte)	{ pte_val(pte) |= _PAGE_ACCESSED; return pte; }
-static inline pte_t pte_mknocache(pte_t pte)
-{
-	pte_val(pte) = (pte_val(pte) & _CACHEMASK040) | m68k_pgtable_cachemode;
-	return pte;
-}
-static inline pte_t pte_mkcache(pte_t pte)
-{
-	pte_val(pte) = (pte_val(pte) & _CACHEMASK040) | m68k_supervisor_cachemode;
-	return pte;
-}
-static inline pte_t pte_mkspecial(pte_t pte)	{ return pte; }
-
-#define PAGE_DIR_OFFSET(tsk,address) pgd_offset((tsk),(address))
-
-#define pgd_index(address)     ((address) >> PGDIR_SHIFT)
-
-/* to find an entry in a page-table-directory */
-static inline pgd_t *pgd_offset(const struct mm_struct *mm,
-				unsigned long address)
-{
-	return mm->pgd + pgd_index(address);
-}
-
-#define swapper_pg_dir kernel_pg_dir
-extern pgd_t kernel_pg_dir[128];
-
-static inline pgd_t *pgd_offset_k(unsigned long address)
-{
-	return kernel_pg_dir + (address >> PGDIR_SHIFT);
-}
-
-
-/* Find an entry in the second-level page table.. */
-static inline pmd_t *pmd_offset(pgd_t *dir, unsigned long address)
-{
-	return (pmd_t *)__pgd_page(*dir) + ((address >> PMD_SHIFT) & (PTRS_PER_PMD-1));
-}
-
-/* Find an entry in the third-level page table.. */
-static inline pte_t *pte_offset_kernel(pmd_t *pmdp, unsigned long address)
-{
-	return (pte_t *)__pmd_page(*pmdp) + ((address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1));
-}
-
-#define pte_offset_map(pmdp,address) ((pte_t *)__pmd_page(*pmdp) + (((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1)))
-#define pte_unmap(pte)		((void)0)
-
-/*
- * Allocate and free page tables. The xxx_kernel() versions are
- * used to allocate a kernel page table - this turns on ASN bits
- * if any.
- */
-
-/* Prior to calling these routines, the page should have been flushed
- * from both the cache and ATC, or the CPU might not notice that the
- * cache setting for the page has been changed. -jskov
- */
-static inline void nocache_page(void *vaddr)
-{
-	unsigned long addr = (unsigned long)vaddr;
-
-	if (CPU_IS_040_OR_060) {
-		pgd_t *dir;
-		pmd_t *pmdp;
-		pte_t *ptep;
-
-		dir = pgd_offset_k(addr);
-		pmdp = pmd_offset(dir, addr);
-		ptep = pte_offset_kernel(pmdp, addr);
-		*ptep = pte_mknocache(*ptep);
-	}
-}
-
-static inline void cache_page(void *vaddr)
-{
-	unsigned long addr = (unsigned long)vaddr;
-
-	if (CPU_IS_040_OR_060) {
-		pgd_t *dir;
-		pmd_t *pmdp;
-		pte_t *ptep;
-
-		dir = pgd_offset_k(addr);
-		pmdp = pmd_offset(dir, addr);
-		ptep = pte_offset_kernel(pmdp, addr);
-		*ptep = pte_mkcache(*ptep);
-	}
-}
-
-#define PTE_FILE_MAX_BITS	28
-
-static inline unsigned long pte_to_pgoff(pte_t pte)
-{
-	return pte.pte >> 4;
-}
-
-static inline pte_t pgoff_to_pte(unsigned off)
-{
-	pte_t pte = { (off << 4) + _PAGE_FILE };
-	return pte;
-}
-
-/* Encode and de-code a swap entry (must be !pte_none(e) && !pte_present(e)) */
-#define __swp_type(x)		(((x).val >> 4) & 0xff)
-#define __swp_offset(x)		((x).val >> 12)
-#define __swp_entry(type, offset) ((swp_entry_t) { ((type) << 4) | ((offset) << 12) })
-#define __pte_to_swp_entry(pte)	((swp_entry_t) { pte_val(pte) })
-#define __swp_entry_to_pte(x)	((pte_t) { (x).val })
-
-#endif	/* !__ASSEMBLY__ */
-#endif /* _MOTOROLA_PGTABLE_H */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/movs.h b/ANDROID_3.4.5/arch/m68k/include/asm/movs.h
deleted file mode 100644
index 67dbea36..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/movs.h
+++ /dev/null
@@ -1,55 +0,0 @@
-#ifndef  __MOVS_H__
-#define __MOVS_H__
-
-/*
-** movs.h
-**
-** Inline assembly macros to generate movs & related instructions
-*/
-
-/* Set DFC register value */
-
-#define SET_DFC(x) \
-        __asm__ __volatile__ (" movec %0,%/dfc" : : "d" (x));
-
-/* Get DFC register value */
-
-#define GET_DFC(x) \
-        __asm__ __volatile__ (" movec %/dfc, %0" : "=d" (x) : );
-
-/* Set SFC register value */
-
-#define SET_SFC(x) \
-        __asm__ __volatile__ (" movec %0,%/sfc" : : "d" (x));
-
-/* Get SFC register value */
-
-#define GET_SFC(x) \
-        __asm__ __volatile__ (" movec %/sfc, %0" : "=d" (x) : );
-
-#define SET_VBR(x) \
-        __asm__ __volatile__ (" movec %0,%/vbr" : : "r" (x));
-
-#define GET_VBR(x) \
-        __asm__ __volatile__ (" movec %/vbr, %0" : "=g" (x) : );
-
-/* Set a byte using the "movs" instruction */
-
-#define SET_CONTROL_BYTE(addr,value) \
-        __asm__ __volatile__ (" movsb %0, %1@" : : "d" (value), "a" (addr));
-
-/* Get a byte using the "movs" instruction */
-
-#define GET_CONTROL_BYTE(addr,value) \
-        __asm__ __volatile__ (" movsb %1@, %0" : "=d" (value) : "a" (addr));
-
-/* Set a (long)word using the "movs" instruction */
-
-#define SET_CONTROL_WORD(addr,value) \
-        __asm__ __volatile__ (" movsl %0, %1@" : : "d" (value), "a" (addr));
-
-/* Get a (long)word using the "movs" instruction */
-
-#define GET_CONTROL_WORD(addr,value) \
-        __asm__ __volatile__ (" movsl %1@, %0" : "=d" (value) : "a" (addr));
-#endif
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/msgbuf.h b/ANDROID_3.4.5/arch/m68k/include/asm/msgbuf.h
deleted file mode 100644
index 243cb798..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/msgbuf.h
+++ /dev/null
@@ -1,31 +0,0 @@
-#ifndef _M68K_MSGBUF_H
-#define _M68K_MSGBUF_H
-
-/*
- * The msqid64_ds structure for m68k architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 64-bit time_t to solve y2038 problem
- * - 2 miscellaneous 32-bit values
- */
-
-struct msqid64_ds {
-	struct ipc64_perm msg_perm;
-	__kernel_time_t msg_stime;	/* last msgsnd time */
-	unsigned long	__unused1;
-	__kernel_time_t msg_rtime;	/* last msgrcv time */
-	unsigned long	__unused2;
-	__kernel_time_t msg_ctime;	/* last change time */
-	unsigned long	__unused3;
-	unsigned long  msg_cbytes;	/* current number of bytes on queue */
-	unsigned long  msg_qnum;	/* number of messages in queue */
-	unsigned long  msg_qbytes;	/* max number of bytes on queue */
-	__kernel_pid_t msg_lspid;	/* pid of last msgsnd */
-	__kernel_pid_t msg_lrpid;	/* last receive pid */
-	unsigned long  __unused4;
-	unsigned long  __unused5;
-};
-
-#endif /* _M68K_MSGBUF_H */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/mutex.h b/ANDROID_3.4.5/arch/m68k/include/asm/mutex.h
deleted file mode 100644
index 458c1f7f..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/mutex.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/*
- * Pull in the generic implementation for the mutex fastpath.
- *
- * TODO: implement optimized primitives instead, or leave the generic
- * implementation in place, or pick the atomic_xchg() based generic
- * implementation. (see asm-generic/mutex-xchg.h for details)
- */
-
-#include <asm-generic/mutex-dec.h>
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/mvme147hw.h b/ANDROID_3.4.5/arch/m68k/include/asm/mvme147hw.h
deleted file mode 100644
index b8104310..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/mvme147hw.h
+++ /dev/null
@@ -1,113 +0,0 @@
-#ifndef _MVME147HW_H_
-#define _MVME147HW_H_
-
-#include <asm/irq.h>
-
-typedef struct {
-	unsigned char
-		ctrl,
-		bcd_sec,
-		bcd_min,
-		bcd_hr,
-		bcd_dow,
-		bcd_dom,
-		bcd_mth,
-		bcd_year;
-} MK48T02;
-
-#define RTC_WRITE	0x80
-#define RTC_READ	0x40
-#define RTC_STOP	0x20
-
-#define m147_rtc ((MK48T02 * volatile)0xfffe07f8)
-
-
-struct pcc_regs {
-   volatile u_long	dma_tadr;
-   volatile u_long	dma_dadr;
-   volatile u_long	dma_bcr;
-   volatile u_long	dma_hr;
-   volatile u_short	t1_preload;
-   volatile u_short	t1_count;
-   volatile u_short	t2_preload;
-   volatile u_short	t2_count;
-   volatile u_char	t1_int_cntrl;
-   volatile u_char	t1_cntrl;
-   volatile u_char	t2_int_cntrl;
-   volatile u_char	t2_cntrl;
-   volatile u_char	ac_fail;
-   volatile u_char	watchdog;
-   volatile u_char	lpt_intr;
-   volatile u_char	lpt_cntrl;
-   volatile u_char	dma_intr;
-   volatile u_char	dma_cntrl;
-   volatile u_char	bus_error;
-   volatile u_char	dma_status;
-   volatile u_char	abort;
-   volatile u_char	ta_fnctl;
-   volatile u_char	serial_cntrl;
-   volatile u_char	general_cntrl;
-   volatile u_char	lan_cntrl;
-   volatile u_char	general_status;
-   volatile u_char	scsi_interrupt;
-   volatile u_char	slave;
-   volatile u_char	soft1_cntrl;
-   volatile u_char	int_base;
-   volatile u_char	soft2_cntrl;
-   volatile u_char	revision_level;
-   volatile u_char	lpt_data;
-   volatile u_char	lpt_status;
-   };
-
-#define m147_pcc ((struct pcc_regs * volatile)0xfffe1000)
-
-
-#define PCC_INT_ENAB		0x08
-
-#define PCC_TIMER_INT_CLR	0x80
-#define PCC_TIMER_PRELOAD	63936l
-
-#define PCC_LEVEL_ABORT		0x07
-#define PCC_LEVEL_SERIAL	0x04
-#define PCC_LEVEL_ETH		0x04
-#define PCC_LEVEL_TIMER1	0x04
-#define PCC_LEVEL_SCSI_PORT	0x04
-#define PCC_LEVEL_SCSI_DMA	0x04
-
-#define PCC_IRQ_AC_FAIL		(IRQ_USER+0)
-#define PCC_IRQ_BERR		(IRQ_USER+1)
-#define PCC_IRQ_ABORT		(IRQ_USER+2)
-/* #define PCC_IRQ_SERIAL	(IRQ_USER+3) */
-#define PCC_IRQ_PRINTER		(IRQ_USER+7)
-#define PCC_IRQ_TIMER1		(IRQ_USER+8)
-#define PCC_IRQ_TIMER2		(IRQ_USER+9)
-#define PCC_IRQ_SOFTWARE1	(IRQ_USER+10)
-#define PCC_IRQ_SOFTWARE2	(IRQ_USER+11)
-
-
-#define M147_SCC_A_ADDR		0xfffe3002
-#define M147_SCC_B_ADDR		0xfffe3000
-#define M147_SCC_PCLK		5000000
-
-#define MVME147_IRQ_SCSI_PORT	(IRQ_USER+0x45)
-#define MVME147_IRQ_SCSI_DMA	(IRQ_USER+0x46)
-
-/* SCC interrupts, for MVME147 */
-
-#define MVME147_IRQ_TYPE_PRIO	0
-#define MVME147_IRQ_SCC_BASE		(IRQ_USER+32)
-#define MVME147_IRQ_SCCB_TX		(IRQ_USER+32)
-#define MVME147_IRQ_SCCB_STAT		(IRQ_USER+34)
-#define MVME147_IRQ_SCCB_RX		(IRQ_USER+36)
-#define MVME147_IRQ_SCCB_SPCOND		(IRQ_USER+38)
-#define MVME147_IRQ_SCCA_TX		(IRQ_USER+40)
-#define MVME147_IRQ_SCCA_STAT		(IRQ_USER+42)
-#define MVME147_IRQ_SCCA_RX		(IRQ_USER+44)
-#define MVME147_IRQ_SCCA_SPCOND		(IRQ_USER+46)
-
-#define MVME147_LANCE_BASE	0xfffe1800
-#define MVME147_LANCE_IRQ	(IRQ_USER+4)
-
-#define ETHERNET_ADDRESS 0xfffe0778
-
-#endif
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/mvme16xhw.h b/ANDROID_3.4.5/arch/m68k/include/asm/mvme16xhw.h
deleted file mode 100644
index 6117f566..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/mvme16xhw.h
+++ /dev/null
@@ -1,111 +0,0 @@
-#ifndef _M68K_MVME16xHW_H_
-#define _M68K_MVME16xHW_H_
-
-#include <asm/irq.h>
-
-/* Board ID data structure - pointer to this retrieved from Bug by head.S */
-
-/* Note, bytes 12 and 13 are board no in BCD (0162,0166,0167,0177,etc) */
-
-extern long mvme_bdid_ptr;
-
-typedef struct {
-	char	bdid[4];
-	u_char	rev, mth, day, yr;
-	u_short	size, reserved;
-	u_short	brdno;
-	char brdsuffix[2];
-	u_long	options;
-	u_short	clun, dlun, ctype, dnum;
-	u_long	option2;
-} t_bdid, *p_bdid;
-
-
-typedef struct {
-	u_char	ack_icr,
-		flt_icr,
-		sel_icr,
-		pe_icr,
-		bsy_icr,
-		spare1,
-		isr,
-		cr,
-		spare2,
-		spare3,
-		spare4,
-		data;
-} MVMElp, *MVMElpPtr;
-
-#define MVME_LPR_BASE	0xfff42030
-
-#define mvmelp   ((*(volatile MVMElpPtr)(MVME_LPR_BASE)))
-
-typedef struct {
-	unsigned char
-		ctrl,
-		bcd_sec,
-		bcd_min,
-		bcd_hr,
-		bcd_dow,
-		bcd_dom,
-		bcd_mth,
-		bcd_year;
-} MK48T08_t, *MK48T08ptr_t;
-
-#define RTC_WRITE	0x80
-#define RTC_READ	0x40
-#define RTC_STOP	0x20
-
-#define MVME_RTC_BASE	0xfffc1ff8
-
-#define MVME_I596_BASE	0xfff46000
-
-#define MVME_SCC_A_ADDR	0xfff45005
-#define MVME_SCC_B_ADDR	0xfff45001
-#define MVME_SCC_PCLK	10000000
-
-#define MVME162_IRQ_TYPE_PRIO	0
-
-#define MVME167_IRQ_PRN		(IRQ_USER+20)
-#define MVME16x_IRQ_I596	(IRQ_USER+23)
-#define MVME16x_IRQ_SCSI	(IRQ_USER+21)
-#define MVME16x_IRQ_FLY		(IRQ_USER+63)
-#define MVME167_IRQ_SER_ERR	(IRQ_USER+28)
-#define MVME167_IRQ_SER_MODEM	(IRQ_USER+29)
-#define MVME167_IRQ_SER_TX	(IRQ_USER+30)
-#define MVME167_IRQ_SER_RX	(IRQ_USER+31)
-#define MVME16x_IRQ_TIMER	(IRQ_USER+25)
-#define MVME167_IRQ_ABORT	(IRQ_USER+46)
-#define MVME162_IRQ_ABORT	(IRQ_USER+30)
-
-/* SCC interrupts, for MVME162 */
-#define MVME162_IRQ_SCC_BASE		(IRQ_USER+0)
-#define MVME162_IRQ_SCCB_TX		(IRQ_USER+0)
-#define MVME162_IRQ_SCCB_STAT		(IRQ_USER+2)
-#define MVME162_IRQ_SCCB_RX		(IRQ_USER+4)
-#define MVME162_IRQ_SCCB_SPCOND		(IRQ_USER+6)
-#define MVME162_IRQ_SCCA_TX		(IRQ_USER+8)
-#define MVME162_IRQ_SCCA_STAT		(IRQ_USER+10)
-#define MVME162_IRQ_SCCA_RX		(IRQ_USER+12)
-#define MVME162_IRQ_SCCA_SPCOND		(IRQ_USER+14)
-
-/* MVME162 version register */
-
-#define MVME162_VERSION_REG	0xfff4202e
-
-extern unsigned short mvme16x_config;
-
-/* Lower 8 bits must match the revision register in the MC2 chip */
-
-#define MVME16x_CONFIG_SPEED_32		0x0001
-#define MVME16x_CONFIG_NO_VMECHIP2	0x0002
-#define MVME16x_CONFIG_NO_SCSICHIP	0x0004
-#define MVME16x_CONFIG_NO_ETHERNET	0x0008
-#define MVME16x_CONFIG_GOT_FPU		0x0010
-
-#define MVME16x_CONFIG_GOT_LP		0x0100
-#define MVME16x_CONFIG_GOT_CD2401	0x0200
-#define MVME16x_CONFIG_GOT_SCCA		0x0400
-#define MVME16x_CONFIG_GOT_SCCB		0x0800
-
-#endif
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/natfeat.h b/ANDROID_3.4.5/arch/m68k/include/asm/natfeat.h
deleted file mode 100644
index a3521b80..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/natfeat.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * ARAnyM hardware support via Native Features (natfeats)
- *
- * Copyright (c) 2005 Petr Stehlik of ARAnyM dev team
- *
- * This software may be used and distributed according to the terms of
- * the GNU General Public License (GPL), incorporated herein by reference.
- */
-
-#ifndef _NATFEAT_H
-#define _NATFEAT_H
-
-long nf_get_id(const char *feature_name);
-long nf_call(long id, ...);
-
-void nf_init(void);
-void nf_shutdown(void);
-
-void nfprint(const char *fmt, ...)
-	__attribute__ ((format (printf, 1, 2)));
-
-# endif /* _NATFEAT_H */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/nettel.h b/ANDROID_3.4.5/arch/m68k/include/asm/nettel.h
deleted file mode 100644
index 4dec2d9f..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/nettel.h
+++ /dev/null
@@ -1,108 +0,0 @@
-/****************************************************************************/
-
-/*
- *	nettel.h -- Lineo (formerly Moreton Bay) NETtel support.
- *
- *	(C) Copyright 1999-2000, Moreton Bay (www.moretonbay.com)
- * 	(C) Copyright 2000-2001, Lineo Inc. (www.lineo.com) 
- * 	(C) Copyright 2001-2002, SnapGear Inc., (www.snapgear.com) 
- */
-
-/****************************************************************************/
-#ifndef	nettel_h
-#define	nettel_h
-/****************************************************************************/
-
-
-/****************************************************************************/
-#ifdef CONFIG_NETtel
-/****************************************************************************/
-
-#ifdef CONFIG_COLDFIRE
-#include <asm/coldfire.h>
-#include <asm/mcfsim.h>
-#endif
-
-/*---------------------------------------------------------------------------*/
-#if defined(CONFIG_M5307)
-/*
- *	NETtel/5307 based hardware first. DTR/DCD lines are wired to
- *	GPIO lines. Most of the LED's are driver through a latch
- *	connected to CS2.
- */
-#define	MCFPP_DCD1	0x0001
-#define	MCFPP_DCD0	0x0002
-#define	MCFPP_DTR1	0x0004
-#define	MCFPP_DTR0	0x0008
-
-#define	NETtel_LEDADDR	0x30400000
-
-#ifndef __ASSEMBLY__
-
-extern volatile unsigned short ppdata;
-
-/*
- *	These functions defined to give quasi generic access to the
- *	PPIO bits used for DTR/DCD.
- */
-static __inline__ unsigned int mcf_getppdata(void)
-{
-	volatile unsigned short *pp;
-	pp = (volatile unsigned short *) MCFSIM_PADAT;
-	return((unsigned int) *pp);
-}
-
-static __inline__ void mcf_setppdata(unsigned int mask, unsigned int bits)
-{
-	volatile unsigned short *pp;
-	pp = (volatile unsigned short *) MCFSIM_PADAT;
-	ppdata = (ppdata & ~mask) | bits;
-	*pp = ppdata;
-}
-#endif
-
-/*---------------------------------------------------------------------------*/
-#elif defined(CONFIG_M5206e)
-/*
- *	NETtel/5206e based hardware has leds on latch on CS3.
- *	No support modem for lines??
- */
-#define	NETtel_LEDADDR	0x50000000
-
-/*---------------------------------------------------------------------------*/
-#elif defined(CONFIG_M5272)
-/*
- *	NETtel/5272 based hardware. DTR/DCD lines are wired to GPB lines.
- */
-#define	MCFPP_DCD0	0x0080
-#define	MCFPP_DCD1	0x0000		/* Port 1 no DCD support */
-#define	MCFPP_DTR0	0x0040
-#define	MCFPP_DTR1	0x0000		/* Port 1 no DTR support */
-
-#ifndef __ASSEMBLY__
-/*
- *	These functions defined to give quasi generic access to the
- *	PPIO bits used for DTR/DCD.
- */
-static __inline__ unsigned int mcf_getppdata(void)
-{
-	volatile unsigned short *pp;
-	pp = (volatile unsigned short *) (MCF_MBAR + MCFSIM_PBDAT);
-	return((unsigned int) *pp);
-}
-
-static __inline__ void mcf_setppdata(unsigned int mask, unsigned int bits)
-{
-	volatile unsigned short *pp;
-	pp = (volatile unsigned short *) (MCF_MBAR + MCFSIM_PBDAT);
-	*pp = (*pp & ~mask) | bits;
-}
-#endif
-
-#endif
-/*---------------------------------------------------------------------------*/
-
-/****************************************************************************/
-#endif /* CONFIG_NETtel */
-/****************************************************************************/
-#endif	/* nettel_h */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/nubus.h b/ANDROID_3.4.5/arch/m68k/include/asm/nubus.h
deleted file mode 100644
index d6be9976..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/nubus.h
+++ /dev/null
@@ -1,46 +0,0 @@
-#ifndef _ASM_M68K_NUBUS_H
-#define _ASM_M68K_NUBUS_H
-
-#include <asm/raw_io.h>
-
-#define nubus_readb raw_inb
-#define nubus_readw raw_inw
-#define nubus_readl raw_inl
-
-#define nubus_writeb raw_outb
-#define nubus_writew raw_outw
-#define nubus_writel raw_outl
-
-#define nubus_memset_io(a,b,c)		memset((void *)(a),(b),(c))
-#define nubus_memcpy_fromio(a,b,c)	memcpy((a),(void *)(b),(c))
-#define nubus_memcpy_toio(a,b,c)	memcpy((void *)(a),(b),(c))
-
-static inline void *nubus_remap_nocache_ser(unsigned long physaddr,
-					    unsigned long size)
-{
-	return __ioremap(physaddr, size, IOMAP_NOCACHE_SER);
-}
-
-static inline void *nubus_remap_nocache_nonser(unsigned long physaddr,
-					       unsigned long size)
-{
-	return __ioremap(physaddr, size, IOMAP_NOCACHE_NONSER);
-}
-
-static inline void *nbus_remap_writethrough(unsigned long physaddr,
-					    unsigned long size)
-{
-	return __ioremap(physaddr, size, IOMAP_WRITETHROUGH);
-}
-
-static inline void *nubus_remap_fullcache(unsigned long physaddr,
-					  unsigned long size)
-{
-	return __ioremap(physaddr, size, IOMAP_FULL_CACHING);
-}
-
-#define nubus_unmap iounmap
-#define nubus_iounmap iounmap
-#define nubus_ioremap nubus_remap_nocache_ser
-
-#endif /* _ASM_NUBUS_H */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/openprom.h b/ANDROID_3.4.5/arch/m68k/include/asm/openprom.h
deleted file mode 100644
index d33cdadf..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/openprom.h
+++ /dev/null
@@ -1,312 +0,0 @@
-#ifndef __SPARC_OPENPROM_H
-#define __SPARC_OPENPROM_H
-
-/* openprom.h:  Prom structures and defines for access to the OPENBOOT
- *              prom routines and data areas.
- *
- * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
- */
-
-
-/* Empirical constants... */
-#ifdef CONFIG_SUN3
-#define KADB_DEBUGGER_BEGVM     0x0fee0000    /* There is no kadb yet but...*/
-#define LINUX_OPPROM_BEGVM      0x0fef0000
-#define LINUX_OPPROM_ENDVM      0x0ff10000    /* I think this is right - tm */
-#else
-#define KADB_DEBUGGER_BEGVM     0xffc00000    /* Where kern debugger is in virt-mem */
-#define	LINUX_OPPROM_BEGVM	0xffd00000
-#define	LINUX_OPPROM_ENDVM	0xfff00000
-#define	LINUX_OPPROM_MAGIC      0x10010407
-#endif
-
-#ifndef __ASSEMBLY__
-/* V0 prom device operations. */
-struct linux_dev_v0_funcs {
-	int (*v0_devopen)(char *device_str);
-	int (*v0_devclose)(int dev_desc);
-	int (*v0_rdblkdev)(int dev_desc, int num_blks, int blk_st, char *buf);
-	int (*v0_wrblkdev)(int dev_desc, int num_blks, int blk_st, char *buf);
-	int (*v0_wrnetdev)(int dev_desc, int num_bytes, char *buf);
-	int (*v0_rdnetdev)(int dev_desc, int num_bytes, char *buf);
-	int (*v0_rdchardev)(int dev_desc, int num_bytes, int dummy, char *buf);
-	int (*v0_wrchardev)(int dev_desc, int num_bytes, int dummy, char *buf);
-	int (*v0_seekdev)(int dev_desc, long logical_offst, int from);
-};
-
-/* V2 and later prom device operations. */
-struct linux_dev_v2_funcs {
-	int (*v2_inst2pkg)(int d);	/* Convert ihandle to phandle */
-	char * (*v2_dumb_mem_alloc)(char *va, unsigned sz);
-	void (*v2_dumb_mem_free)(char *va, unsigned sz);
-
-	/* To map devices into virtual I/O space. */
-	char * (*v2_dumb_mmap)(char *virta, int which_io, unsigned paddr, unsigned sz);
-	void (*v2_dumb_munmap)(char *virta, unsigned size);
-
-	int (*v2_dev_open)(char *devpath);
-	void (*v2_dev_close)(int d);
-	int (*v2_dev_read)(int d, char *buf, int nbytes);
-	int (*v2_dev_write)(int d, char *buf, int nbytes);
-	int (*v2_dev_seek)(int d, int hi, int lo);
-
-	/* Never issued (multistage load support) */
-	void (*v2_wheee2)(void);
-	void (*v2_wheee3)(void);
-};
-
-struct linux_mlist_v0 {
-	struct linux_mlist_v0 *theres_more;
-	char *start_adr;
-	unsigned num_bytes;
-};
-
-struct linux_mem_v0 {
-	struct linux_mlist_v0 **v0_totphys;
-	struct linux_mlist_v0 **v0_prommap;
-	struct linux_mlist_v0 **v0_available; /* What we can use */
-};
-
-/* Arguments sent to the kernel from the boot prompt. */
-struct linux_arguments_v0 {
-	char *argv[8];
-	char args[100];
-	char boot_dev[2];
-	int boot_dev_ctrl;
-	int boot_dev_unit;
-	int dev_partition;
-	char *kernel_file_name;
-	void *aieee1;           /* XXX */
-};
-
-/* V2 and up boot things. */
-struct linux_bootargs_v2 {
-	char **bootpath;
-	char **bootargs;
-	int *fd_stdin;
-	int *fd_stdout;
-};
-
-#if defined(CONFIG_SUN3) || defined(CONFIG_SUN3X)
-struct linux_romvec {
-	char		*pv_initsp;
-	int		(*pv_startmon)(void);
-
-	int		*diagberr;
-
-	struct linux_arguments_v0 **pv_v0bootargs;
-	unsigned	*pv_sun3mem;
-
-	unsigned char	(*pv_getchar)(void);
-	int		(*pv_putchar)(int ch);
-	int		(*pv_nbgetchar)(void);
-	int		(*pv_nbputchar)(int ch);
-	unsigned char	*pv_echo;
-	unsigned char	*pv_insource;
-	unsigned char	*pv_outsink;
-
-	int		(*pv_getkey)(void);
-	int		(*pv_initgetkey)(void);
-	unsigned int	*pv_translation;
-	unsigned char	*pv_keybid;
-	int		*pv_screen_x;
-	int		*pv_screen_y;
-	struct keybuf	*pv_keybuf;
-
-	char		*pv_monid;
-
-	/*
-	 * Frame buffer output and terminal emulation
-	 */
-
-	int		(*pv_fbwritechar)(char);
-	int		*pv_fbaddr;
-	char		**pv_font;
-	int		(*pv_fbwritestr)(char);
-
-	void		(*pv_reboot)(char *bootstr);
-
-	/*
-	 * Line input and parsing
-	 */
-
-	unsigned char	*pv_linebuf;
-	unsigned char	**pv_lineptr;
-	int		*pv_linesize;
-	int		(*pv_getline)(void);
-	unsigned char	(*pv_getnextchar)(void);
-	unsigned char	(*pv_peeknextchar)(void);
-	int		*pv_fbthere;
-	int		(*pv_getnum)(void);
-
-	void		(*pv_printf)(const char *fmt, ...);
-	int		(*pv_printhex)(void);
-
-	unsigned char	*pv_leds;
-	int		(*pv_setleds)(void);
-
-	/*
-	 * Non-maskable interrupt  (nmi) information
-	 */
-
-	int		(*pv_nmiaddr)(void);
-	int		(*pv_abortentry)(void);
-	int		*pv_nmiclock;
-
-	int		*pv_fbtype;
-
-	/*
-	 * Assorted other things
-	 */
-
-	unsigned	pv_romvers;
-	struct globram  *pv_globram;
-	char		*pv_kbdzscc;
-
-	int		*pv_keyrinit;
-	unsigned char	*pv_keyrtick;
-	unsigned	*pv_memoryavail;
-	long		*pv_resetaddr;
-	long		*pv_resetmap;
-
-	void		(*pv_halt)(void);
-	unsigned char	*pv_memorybitmap;
-
-#ifdef CONFIG_SUN3
-	void		(*pv_setctxt)(int ctxt, char *va, int pmeg);
-	void		(*pv_vector_cmd)(void);
-	int		dummy1z;
-	int		dummy2z;
-	int		dummy3z;
-	int		dummy4z;
-#endif
-};
-#else
-/* The top level PROM vector. */
-struct linux_romvec {
-	/* Version numbers. */
-	unsigned int pv_magic_cookie;
-	unsigned int pv_romvers;
-	unsigned int pv_plugin_revision;
-	unsigned int pv_printrev;
-
-	/* Version 0 memory descriptors. */
-	struct linux_mem_v0 pv_v0mem;
-
-	/* Node operations. */
-	struct linux_nodeops *pv_nodeops;
-
-	char **pv_bootstr;
-	struct linux_dev_v0_funcs pv_v0devops;
-
-	char *pv_stdin;
-	char *pv_stdout;
-#define	PROMDEV_KBD	0		/* input from keyboard */
-#define	PROMDEV_SCREEN	0		/* output to screen */
-#define	PROMDEV_TTYA	1		/* in/out to ttya */
-#define	PROMDEV_TTYB	2		/* in/out to ttyb */
-
-	/* Blocking getchar/putchar.  NOT REENTRANT! (grr) */
-	int (*pv_getchar)(void);
-	void (*pv_putchar)(int ch);
-
-	/* Non-blocking variants. */
-	int (*pv_nbgetchar)(void);
-	int (*pv_nbputchar)(int ch);
-
-	void (*pv_putstr)(char *str, int len);
-
-	/* Miscellany. */
-	void (*pv_reboot)(char *bootstr);
-	void (*pv_printf)(__const__ char *fmt, ...);
-	void (*pv_abort)(void);
-	__volatile__ int *pv_ticks;
-	void (*pv_halt)(void);
-	void (**pv_synchook)(void);
-
-	/* Evaluate a forth string, not different proto for V0 and V2->up. */
-	union {
-		void (*v0_eval)(int len, char *str);
-		void (*v2_eval)(char *str);
-	} pv_fortheval;
-
-	struct linux_arguments_v0 **pv_v0bootargs;
-
-	/* Get ether address. */
-	unsigned int (*pv_enaddr)(int d, char *enaddr);
-
-	struct linux_bootargs_v2 pv_v2bootargs;
-	struct linux_dev_v2_funcs pv_v2devops;
-
-	int filler[15];
-
-	/* This one is sun4c/sun4 only. */
-	void (*pv_setctxt)(int ctxt, char *va, int pmeg);
-
-	/* Prom version 3 Multiprocessor routines. This stuff is crazy.
-	 * No joke. Calling these when there is only one cpu probably
-	 * crashes the machine, have to test this. :-)
-	 */
-
-	/* v3_cpustart() will start the cpu 'whichcpu' in mmu-context
-	 * 'thiscontext' executing at address 'prog_counter'
-	 */
-	int (*v3_cpustart)(unsigned int whichcpu, int ctxtbl_ptr,
-			   int thiscontext, char *prog_counter);
-
-	/* v3_cpustop() will cause cpu 'whichcpu' to stop executing
-	 * until a resume cpu call is made.
-	 */
-	int (*v3_cpustop)(unsigned int whichcpu);
-
-	/* v3_cpuidle() will idle cpu 'whichcpu' until a stop or
-	 * resume cpu call is made.
-	 */
-	int (*v3_cpuidle)(unsigned int whichcpu);
-
-	/* v3_cpuresume() will resume processor 'whichcpu' executing
-	 * starting with whatever 'pc' and 'npc' were left at the
-	 * last 'idle' or 'stop' call.
-	 */
-	int (*v3_cpuresume)(unsigned int whichcpu);
-};
-#endif
-
-/* Routines for traversing the prom device tree. */
-struct linux_nodeops {
-	int (*no_nextnode)(int node);
-	int (*no_child)(int node);
-	int (*no_proplen)(int node, char *name);
-	int (*no_getprop)(int node, char *name, char *val);
-	int (*no_setprop)(int node, char *name, char *val, int len);
-	char * (*no_nextprop)(int node, char *name);
-};
-
-/* More fun PROM structures for device probing. */
-#define PROMREG_MAX     16
-#define PROMVADDR_MAX   16
-#define PROMINTR_MAX    15
-
-struct linux_prom_registers {
-	int which_io;         /* is this in OBIO space? */
-	char *phys_addr;      /* The physical address of this register */
-	int reg_size;         /* How many bytes does this register take up? */
-};
-
-struct linux_prom_irqs {
-	int pri;    /* IRQ priority */
-	int vector; /* This is foobar, what does it do? */
-};
-
-/* Element of the "ranges" vector */
-struct linux_prom_ranges {
-	unsigned int ot_child_space;
-	unsigned int ot_child_base;		/* Bus feels this */
-	unsigned int ot_parent_space;
-	unsigned int ot_parent_base;		/* CPU looks from here */
-	unsigned int or_size;
-};
-
-#endif /* !(__ASSEMBLY__) */
-
-#endif /* !(__SPARC_OPENPROM_H) */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/oplib.h b/ANDROID_3.4.5/arch/m68k/include/asm/oplib.h
deleted file mode 100644
index f082d033..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/oplib.h
+++ /dev/null
@@ -1,291 +0,0 @@
-/*
- * oplib.h:  Describes the interface and available routines in the
- *           Linux Prom library.
- *
- * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
- */
-
-#ifndef __SPARC_OPLIB_H
-#define __SPARC_OPLIB_H
-
-#include <asm/openprom.h>
-
-/* The master romvec pointer... */
-extern struct linux_romvec *romvec;
-
-/* Enumeration to describe the prom major version we have detected. */
-enum prom_major_version {
-	PROM_V0,      /* Original sun4c V0 prom */
-	PROM_V2,      /* sun4c and early sun4m V2 prom */
-	PROM_V3,      /* sun4m and later, up to sun4d/sun4e machines V3 */
-	PROM_P1275,   /* IEEE compliant ISA based Sun PROM, only sun4u */
-};
-
-extern enum prom_major_version prom_vers;
-/* Revision, and firmware revision. */
-extern unsigned int prom_rev, prom_prev;
-
-/* Root node of the prom device tree, this stays constant after
- * initialization is complete.
- */
-extern int prom_root_node;
-
-/* Pointer to prom structure containing the device tree traversal
- * and usage utility functions.  Only prom-lib should use these,
- * users use the interface defined by the library only!
- */
-extern struct linux_nodeops *prom_nodeops;
-
-/* The functions... */
-
-/* You must call prom_init() before using any of the library services,
- * preferably as early as possible.  Pass it the romvec pointer.
- */
-extern void prom_init(struct linux_romvec *rom_ptr);
-
-/* Boot argument acquisition, returns the boot command line string. */
-extern char *prom_getbootargs(void);
-
-/* Device utilities. */
-
-/* Map and unmap devices in IO space at virtual addresses. Note that the
- * virtual address you pass is a request and the prom may put your mappings
- * somewhere else, so check your return value as that is where your new
- * mappings really are!
- *
- * Another note, these are only available on V2 or higher proms!
- */
-extern char *prom_mapio(char *virt_hint, int io_space, unsigned int phys_addr, unsigned int num_bytes);
-extern void prom_unmapio(char *virt_addr, unsigned int num_bytes);
-
-/* Device operations. */
-
-/* Open the device described by the passed string.  Note, that the format
- * of the string is different on V0 vs. V2->higher proms.  The caller must
- * know what he/she is doing!  Returns the device descriptor, an int.
- */
-extern int prom_devopen(char *device_string);
-
-/* Close a previously opened device described by the passed integer
- * descriptor.
- */
-extern int prom_devclose(int device_handle);
-
-/* Do a seek operation on the device described by the passed integer
- * descriptor.
- */
-extern void prom_seek(int device_handle, unsigned int seek_hival,
-		      unsigned int seek_lowval);
-
-/* Machine memory configuration routine. */
-
-/* This function returns a V0 format memory descriptor table, it has three
- * entries.  One for the total amount of physical ram on the machine, one
- * for the amount of physical ram available, and one describing the virtual
- * areas which are allocated by the prom.  So, in a sense the physical
- * available is a calculation of the total physical minus the physical mapped
- * by the prom with virtual mappings.
- *
- * These lists are returned pre-sorted, this should make your life easier
- * since the prom itself is way too lazy to do such nice things.
- */
-extern struct linux_mem_v0 *prom_meminfo(void);
-
-/* Miscellaneous routines, don't really fit in any category per se. */
-
-/* Reboot the machine with the command line passed. */
-extern void prom_reboot(char *boot_command);
-
-/* Evaluate the forth string passed. */
-extern void prom_feval(char *forth_string);
-
-/* Enter the prom, with possibility of continuation with the 'go'
- * command in newer proms.
- */
-extern void prom_cmdline(void);
-
-/* Enter the prom, with no chance of continuation for the stand-alone
- * which calls this.
- */
-extern void prom_halt(void);
-
-/* Set the PROM 'sync' callback function to the passed function pointer.
- * When the user gives the 'sync' command at the prom prompt while the
- * kernel is still active, the prom will call this routine.
- *
- * XXX The arguments are different on V0 vs. V2->higher proms, grrr! XXX
- */
-typedef void (*sync_func_t)(void);
-extern void prom_setsync(sync_func_t func_ptr);
-
-/* Acquire the IDPROM of the root node in the prom device tree.  This
- * gets passed a buffer where you would like it stuffed.  The return value
- * is the format type of this idprom or 0xff on error.
- */
-extern unsigned char prom_get_idprom(char *idp_buffer, int idpbuf_size);
-
-/* Get the prom major version. */
-extern int prom_version(void);
-
-/* Get the prom plugin revision. */
-extern int prom_getrev(void);
-
-/* Get the prom firmware revision. */
-extern int prom_getprev(void);
-
-/* Character operations to/from the console.... */
-
-/* Non-blocking get character from console. */
-extern int prom_nbgetchar(void);
-
-/* Non-blocking put character to console. */
-extern int prom_nbputchar(char character);
-
-/* Blocking get character from console. */
-extern char prom_getchar(void);
-
-/* Blocking put character to console. */
-extern void prom_putchar(char character);
-
-/* Prom's internal printf routine, don't use in kernel/boot code. */
-void prom_printf(char *fmt, ...);
-
-/* Query for input device type */
-
-enum prom_input_device {
-	PROMDEV_IKBD,			/* input from keyboard */
-	PROMDEV_ITTYA,			/* input from ttya */
-	PROMDEV_ITTYB,			/* input from ttyb */
-	PROMDEV_I_UNK,
-};
-
-extern enum prom_input_device prom_query_input_device(void);
-
-/* Query for output device type */
-
-enum prom_output_device {
-	PROMDEV_OSCREEN,		/* to screen */
-	PROMDEV_OTTYA,			/* to ttya */
-	PROMDEV_OTTYB,			/* to ttyb */
-	PROMDEV_O_UNK,
-};
-
-extern enum prom_output_device prom_query_output_device(void);
-
-/* Multiprocessor operations... */
-
-/* Start the CPU with the given device tree node, context table, and context
- * at the passed program counter.
- */
-extern int prom_startcpu(int cpunode, struct linux_prom_registers *context_table,
-			 int context, char *program_counter);
-
-/* Stop the CPU with the passed device tree node. */
-extern int prom_stopcpu(int cpunode);
-
-/* Idle the CPU with the passed device tree node. */
-extern int prom_idlecpu(int cpunode);
-
-/* Re-Start the CPU with the passed device tree node. */
-extern int prom_restartcpu(int cpunode);
-
-/* PROM memory allocation facilities... */
-
-/* Allocated at possibly the given virtual address a chunk of the
- * indicated size.
- */
-extern char *prom_alloc(char *virt_hint, unsigned int size);
-
-/* Free a previously allocated chunk. */
-extern void prom_free(char *virt_addr, unsigned int size);
-
-/* Sun4/sun4c specific memory-management startup hook. */
-
-/* Map the passed segment in the given context at the passed
- * virtual address.
- */
-extern void prom_putsegment(int context, unsigned long virt_addr,
-			    int physical_segment);
-
-/* PROM device tree traversal functions... */
-
-/* Get the child node of the given node, or zero if no child exists. */
-extern int prom_getchild(int parent_node);
-
-/* Get the next sibling node of the given node, or zero if no further
- * siblings exist.
- */
-extern int prom_getsibling(int node);
-
-/* Get the length, at the passed node, of the given property type.
- * Returns -1 on error (ie. no such property at this node).
- */
-extern int prom_getproplen(int thisnode, char *property);
-
-/* Fetch the requested property using the given buffer.  Returns
- * the number of bytes the prom put into your buffer or -1 on error.
- */
-extern int prom_getproperty(int thisnode, char *property,
-			    char *prop_buffer, int propbuf_size);
-
-/* Acquire an integer property. */
-extern int prom_getint(int node, char *property);
-
-/* Acquire an integer property, with a default value. */
-extern int prom_getintdefault(int node, char *property, int defval);
-
-/* Acquire a boolean property, 0=FALSE 1=TRUE. */
-extern int prom_getbool(int node, char *prop);
-
-/* Acquire a string property, null string on error. */
-extern void prom_getstring(int node, char *prop, char *buf, int bufsize);
-
-/* Does the passed node have the given "name"? YES=1 NO=0 */
-extern int prom_nodematch(int thisnode, char *name);
-
-/* Search all siblings starting at the passed node for "name" matching
- * the given string.  Returns the node on success, zero on failure.
- */
-extern int prom_searchsiblings(int node_start, char *name);
-
-/* Return the first property type, as a string, for the given node.
- * Returns a null string on error.
- */
-extern char *prom_firstprop(int node);
-
-/* Returns the next property after the passed property for the given
- * node.  Returns null string on failure.
- */
-extern char *prom_nextprop(int node, char *prev_property);
-
-/* Returns 1 if the specified node has given property. */
-extern int prom_node_has_property(int node, char *property);
-
-/* Set the indicated property at the given node with the passed value.
- * Returns the number of bytes of your value that the prom took.
- */
-extern int prom_setprop(int node, char *prop_name, char *prop_value,
-			int value_size);
-
-extern int prom_pathtoinode(char *path);
-extern int prom_inst2pkg(int);
-
-/* Dorking with Bus ranges... */
-
-/* Adjust reg values with the passed ranges. */
-extern void prom_adjust_regs(struct linux_prom_registers *regp, int nregs,
-			     struct linux_prom_ranges *rangep, int nranges);
-
-/* Adjust child ranges with the passed parent ranges. */
-extern void prom_adjust_ranges(struct linux_prom_ranges *cranges, int ncranges,
-			       struct linux_prom_ranges *pranges, int npranges);
-
-/* Apply promlib probed OBIO ranges to registers. */
-extern void prom_apply_obio_ranges(struct linux_prom_registers *obioregs, int nregs);
-
-/* Apply ranges of any prom node (and optionally parent node as well) to registers. */
-extern void prom_apply_generic_ranges(int node, int parent,
-				      struct linux_prom_registers *sbusregs, int nregs);
-
-
-#endif /* !(__SPARC_OPLIB_H) */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/page.h b/ANDROID_3.4.5/arch/m68k/include/asm/page.h
deleted file mode 100644
index 98baa82a..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/page.h
+++ /dev/null
@@ -1,53 +0,0 @@
-#ifndef _M68K_PAGE_H
-#define _M68K_PAGE_H
-
-#include <linux/const.h>
-#include <asm/setup.h>
-#include <asm/page_offset.h>
-
-/* PAGE_SHIFT determines the page size */
-#if defined(CONFIG_SUN3) || defined(CONFIG_COLDFIRE)
-#define PAGE_SHIFT	13
-#else
-#define PAGE_SHIFT	12
-#endif
-#define PAGE_SIZE	(_AC(1, UL) << PAGE_SHIFT)
-#define PAGE_MASK	(~(PAGE_SIZE-1))
-#define PAGE_OFFSET	(PAGE_OFFSET_RAW)
-
-#ifndef __ASSEMBLY__
-
-/*
- * These are used to make use of C type-checking..
- */
-typedef struct { unsigned long pte; } pte_t;
-typedef struct { unsigned long pmd[16]; } pmd_t;
-typedef struct { unsigned long pgd; } pgd_t;
-typedef struct { unsigned long pgprot; } pgprot_t;
-typedef struct page *pgtable_t;
-
-#define pte_val(x)	((x).pte)
-#define pmd_val(x)	((&x)->pmd[0])
-#define pgd_val(x)	((x).pgd)
-#define pgprot_val(x)	((x).pgprot)
-
-#define __pte(x)	((pte_t) { (x) } )
-#define __pmd(x)	((pmd_t) { (x) } )
-#define __pgd(x)	((pgd_t) { (x) } )
-#define __pgprot(x)	((pgprot_t) { (x) } )
-
-extern unsigned long _rambase;
-extern unsigned long _ramstart;
-extern unsigned long _ramend;
-
-#endif /* !__ASSEMBLY__ */
-
-#ifdef CONFIG_MMU
-#include "page_mm.h"
-#else
-#include "page_no.h"
-#endif
-
-#include <asm-generic/getorder.h>
-
-#endif /* _M68K_PAGE_H */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/page_mm.h b/ANDROID_3.4.5/arch/m68k/include/asm/page_mm.h
deleted file mode 100644
index 89f20143..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/page_mm.h
+++ /dev/null
@@ -1,179 +0,0 @@
-#ifndef _M68K_PAGE_MM_H
-#define _M68K_PAGE_MM_H
-
-#ifndef __ASSEMBLY__
-
-#include <linux/compiler.h>
-#include <asm/module.h>
-
-#define get_user_page(vaddr)		__get_free_page(GFP_KERNEL)
-#define free_user_page(page, addr)	free_page(addr)
-
-/*
- * We don't need to check for alignment etc.
- */
-#ifdef CPU_M68040_OR_M68060_ONLY
-static inline void copy_page(void *to, void *from)
-{
-  unsigned long tmp;
-
-  __asm__ __volatile__("1:\t"
-		       ".chip 68040\n\t"
-		       "move16 %1@+,%0@+\n\t"
-		       "move16 %1@+,%0@+\n\t"
-		       ".chip 68k\n\t"
-		       "dbra  %2,1b\n\t"
-		       : "=a" (to), "=a" (from), "=d" (tmp)
-		       : "0" (to), "1" (from) , "2" (PAGE_SIZE / 32 - 1)
-		       );
-}
-
-static inline void clear_page(void *page)
-{
-	unsigned long tmp;
-	unsigned long *sp = page;
-
-	*sp++ = 0;
-	*sp++ = 0;
-	*sp++ = 0;
-	*sp++ = 0;
-
-	__asm__ __volatile__("1:\t"
-			     ".chip 68040\n\t"
-			     "move16 %2@+,%0@+\n\t"
-			     ".chip 68k\n\t"
-			     "subqw  #8,%2\n\t"
-			     "subqw  #8,%2\n\t"
-			     "dbra   %1,1b\n\t"
-			     : "=a" (sp), "=d" (tmp)
-			     : "a" (page), "0" (sp),
-			       "1" ((PAGE_SIZE - 16) / 16 - 1));
-}
-
-#else
-#define clear_page(page)	memset((page), 0, PAGE_SIZE)
-#define copy_page(to,from)	memcpy((to), (from), PAGE_SIZE)
-#endif
-
-#define clear_user_page(addr, vaddr, page)	\
-	do {	clear_page(addr);		\
-		flush_dcache_page(page);	\
-	} while (0)
-#define copy_user_page(to, from, vaddr, page)	\
-	do {	copy_page(to, from);		\
-		flush_dcache_page(page);	\
-	} while (0)
-
-extern unsigned long m68k_memoffset;
-
-#ifndef CONFIG_SUN3
-
-#define WANT_PAGE_VIRTUAL
-
-static inline unsigned long ___pa(void *vaddr)
-{
-	unsigned long paddr;
-	asm (
-		"1:	addl #0,%0\n"
-		m68k_fixup(%c2, 1b+2)
-		: "=r" (paddr)
-		: "0" (vaddr), "i" (m68k_fixup_memoffset));
-	return paddr;
-}
-#define __pa(vaddr)	___pa((void *)(long)(vaddr))
-static inline void *__va(unsigned long paddr)
-{
-	void *vaddr;
-	asm (
-		"1:	subl #0,%0\n"
-		m68k_fixup(%c2, 1b+2)
-		: "=r" (vaddr)
-		: "0" (paddr), "i" (m68k_fixup_memoffset));
-	return vaddr;
-}
-
-#else	/* !CONFIG_SUN3 */
-/* This #define is a horrible hack to suppress lots of warnings. --m */
-#define __pa(x) ___pa((unsigned long)(x))
-static inline unsigned long ___pa(unsigned long x)
-{
-     if(x == 0)
-	  return 0;
-     if(x >= PAGE_OFFSET)
-        return (x-PAGE_OFFSET);
-     else
-        return (x+0x2000000);
-}
-
-static inline void *__va(unsigned long x)
-{
-     if(x == 0)
-	  return (void *)0;
-
-     if(x < 0x2000000)
-        return (void *)(x+PAGE_OFFSET);
-     else
-        return (void *)(x-0x2000000);
-}
-#endif	/* CONFIG_SUN3 */
-
-/*
- * NOTE: virtual isn't really correct, actually it should be the offset into the
- * memory node, but we have no highmem, so that works for now.
- * TODO: implement (fast) pfn<->pgdat_idx conversion functions, this makes lots
- * of the shifts unnecessary.
- */
-#define virt_to_pfn(kaddr)	(__pa(kaddr) >> PAGE_SHIFT)
-#define pfn_to_virt(pfn)	__va((pfn) << PAGE_SHIFT)
-
-extern int m68k_virt_to_node_shift;
-
-#ifdef CONFIG_SINGLE_MEMORY_CHUNK
-#define __virt_to_node(addr)	(&pg_data_map[0])
-#else
-extern struct pglist_data *pg_data_table[];
-
-static inline __attribute_const__ int __virt_to_node_shift(void)
-{
-	int shift;
-
-	asm (
-		"1:	moveq	#0,%0\n"
-		m68k_fixup(%c1, 1b)
-		: "=d" (shift)
-		: "i" (m68k_fixup_vnode_shift));
-	return shift;
-}
-
-#define __virt_to_node(addr)	(pg_data_table[(unsigned long)(addr) >> __virt_to_node_shift()])
-#endif
-
-#define virt_to_page(addr) ({						\
-	pfn_to_page(virt_to_pfn(addr));					\
-})
-#define page_to_virt(page) ({						\
-	pfn_to_virt(page_to_pfn(page));					\
-})
-
-#define pfn_to_page(pfn) ({						\
-	unsigned long __pfn = (pfn);					\
-	struct pglist_data *pgdat;					\
-	pgdat = __virt_to_node((unsigned long)pfn_to_virt(__pfn));	\
-	pgdat->node_mem_map + (__pfn - pgdat->node_start_pfn);		\
-})
-#define page_to_pfn(_page) ({						\
-	const struct page *__p = (_page);				\
-	struct pglist_data *pgdat;					\
-	pgdat = &pg_data_map[page_to_nid(__p)];				\
-	((__p) - pgdat->node_mem_map) + pgdat->node_start_pfn;		\
-})
-
-#define virt_addr_valid(kaddr)	((void *)(kaddr) >= (void *)PAGE_OFFSET && (void *)(kaddr) < high_memory)
-#define pfn_valid(pfn)		virt_addr_valid(pfn_to_virt(pfn))
-
-#endif /* __ASSEMBLY__ */
-
-#define VM_DATA_DEFAULT_FLAGS	(VM_READ | VM_WRITE | VM_EXEC | \
-				 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
-
-#endif /* _M68K_PAGE_MM_H */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/page_no.h b/ANDROID_3.4.5/arch/m68k/include/asm/page_no.h
deleted file mode 100644
index 90595721..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/page_no.h
+++ /dev/null
@@ -1,40 +0,0 @@
-#ifndef _M68K_PAGE_NO_H
-#define _M68K_PAGE_NO_H
-
-#ifndef __ASSEMBLY__
- 
-extern unsigned long memory_start;
-extern unsigned long memory_end;
-
-#define get_user_page(vaddr)		__get_free_page(GFP_KERNEL)
-#define free_user_page(page, addr)	free_page(addr)
-
-#define clear_page(page)	memset((page), 0, PAGE_SIZE)
-#define copy_page(to,from)	memcpy((to), (from), PAGE_SIZE)
-
-#define clear_user_page(page, vaddr, pg)	clear_page(page)
-#define copy_user_page(to, from, vaddr, pg)	copy_page(to, from)
-
-#define __alloc_zeroed_user_highpage(movableflags, vma, vaddr) \
-	alloc_page_vma(GFP_HIGHUSER | __GFP_ZERO | movableflags, vma, vaddr)
-#define __HAVE_ARCH_ALLOC_ZEROED_USER_HIGHPAGE
-
-#define __pa(vaddr)		((unsigned long)(vaddr))
-#define __va(paddr)		((void *)(paddr))
-
-#define virt_to_pfn(kaddr)	(__pa(kaddr) >> PAGE_SHIFT)
-#define pfn_to_virt(pfn)	__va((pfn) << PAGE_SHIFT)
-
-#define virt_to_page(addr)	(mem_map + (((unsigned long)(addr)-PAGE_OFFSET) >> PAGE_SHIFT))
-#define page_to_virt(page)	((((page) - mem_map) << PAGE_SHIFT) + PAGE_OFFSET)
-
-#define pfn_to_page(pfn)	virt_to_page(pfn_to_virt(pfn))
-#define page_to_pfn(page)	virt_to_pfn(page_to_virt(page))
-#define pfn_valid(pfn)	        ((pfn) < max_mapnr)
-
-#define	virt_addr_valid(kaddr)	(((void *)(kaddr) >= (void *)PAGE_OFFSET) && \
-				((void *)(kaddr) < (void *)memory_end))
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* _M68K_PAGE_NO_H */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/page_offset.h b/ANDROID_3.4.5/arch/m68k/include/asm/page_offset.h
deleted file mode 100644
index 82626a8f..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/page_offset.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/* This handles the memory map.. */
-
-#if defined(CONFIG_RAMBASE)
-#define PAGE_OFFSET_RAW		CONFIG_RAMBASE
-#elif defined(CONFIG_SUN3)
-#define PAGE_OFFSET_RAW		0x0E000000
-#else
-#define PAGE_OFFSET_RAW		0x00000000
-#endif
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/param.h b/ANDROID_3.4.5/arch/m68k/include/asm/param.h
deleted file mode 100644
index 36265ccf..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/param.h
+++ /dev/null
@@ -1,12 +0,0 @@
-#ifndef _M68K_PARAM_H
-#define _M68K_PARAM_H
-
-#ifdef __uClinux__
-#define EXEC_PAGESIZE	4096
-#else
-#define EXEC_PAGESIZE	8192
-#endif
-
-#include <asm-generic/param.h>
-
-#endif /* _M68K_PARAM_H */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/parport.h b/ANDROID_3.4.5/arch/m68k/include/asm/parport.h
deleted file mode 100644
index 646b1872..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/parport.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * parport.h: platform-specific PC-style parport initialisation
- *
- * Copyright (C) 1999, 2000  Tim Waugh <tim@cyberelk.demon.co.uk>
- *
- * This file should only be included by drivers/parport/parport_pc.c.
- *
- * RZ: for use with Q40 and other ISA machines
- */
-
-#ifndef _ASM_M68K_PARPORT_H
-#define _ASM_M68K_PARPORT_H 1
-
-#define insl(port,buf,len)   isa_insb(port,buf,(len)<<2)
-#define outsl(port,buf,len)  isa_outsb(port,buf,(len)<<2)
-
-/* no dma, or IRQ autoprobing */
-static int __devinit parport_pc_find_isa_ports (int autoirq, int autodma);
-static int __devinit parport_pc_find_nonpci_ports (int autoirq, int autodma)
-{
-        if (! (MACH_IS_Q40))
-	  return 0; /* count=0 */
-	return parport_pc_find_isa_ports (PARPORT_IRQ_NONE, PARPORT_DMA_NONE);
-}
-
-#endif /* !(_ASM_M68K_PARPORT_H) */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/pci.h b/ANDROID_3.4.5/arch/m68k/include/asm/pci.h
deleted file mode 100644
index 4ad0aea4..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/pci.h
+++ /dev/null
@@ -1,12 +0,0 @@
-#ifndef _ASM_M68K_PCI_H
-#define _ASM_M68K_PCI_H
-
-#include <asm-generic/pci-dma-compat.h>
-
-/* The PCI address space does equal the physical memory
- * address space.  The networking and block device layers use
- * this boolean for bounce buffer decisions.
- */
-#define PCI_DMA_BUS_IS_PHYS	(1)
-
-#endif /* _ASM_M68K_PCI_H */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/percpu.h b/ANDROID_3.4.5/arch/m68k/include/asm/percpu.h
deleted file mode 100644
index 0859d048..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/percpu.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __ASM_M68K_PERCPU_H
-#define __ASM_M68K_PERCPU_H
-
-#include <asm-generic/percpu.h>
-
-#endif	/* __ASM_M68K_PERCPU_H */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/pgalloc.h b/ANDROID_3.4.5/arch/m68k/include/asm/pgalloc.h
deleted file mode 100644
index 37bee7e3..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/pgalloc.h
+++ /dev/null
@@ -1,21 +0,0 @@
-#ifndef M68K_PGALLOC_H
-#define M68K_PGALLOC_H
-
-#include <linux/mm.h>
-#include <linux/highmem.h>
-#include <asm/setup.h>
-
-#ifdef CONFIG_MMU
-#include <asm/virtconvert.h>
-#if defined(CONFIG_COLDFIRE)
-#include <asm/mcf_pgalloc.h>
-#elif defined(CONFIG_SUN3)
-#include <asm/sun3_pgalloc.h>
-#else
-#include <asm/motorola_pgalloc.h>
-#endif
-
-extern void m68k_setup_node(int node);
-#endif
-
-#endif /* M68K_PGALLOC_H */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/pgtable.h b/ANDROID_3.4.5/arch/m68k/include/asm/pgtable.h
deleted file mode 100644
index ee6759eb..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/pgtable.h
+++ /dev/null
@@ -1,5 +0,0 @@
-#ifdef __uClinux__
-#include "pgtable_no.h"
-#else
-#include "pgtable_mm.h"
-#endif
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/pgtable_mm.h b/ANDROID_3.4.5/arch/m68k/include/asm/pgtable_mm.h
deleted file mode 100644
index dc35e0e1..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/pgtable_mm.h
+++ /dev/null
@@ -1,183 +0,0 @@
-#ifndef _M68K_PGTABLE_H
-#define _M68K_PGTABLE_H
-
-#include <asm-generic/4level-fixup.h>
-
-#include <asm/setup.h>
-
-#ifndef __ASSEMBLY__
-#include <asm/processor.h>
-#include <linux/sched.h>
-#include <linux/threads.h>
-
-/*
- * This file contains the functions and defines necessary to modify and use
- * the m68k page table tree.
- */
-
-#include <asm/virtconvert.h>
-
-/* Certain architectures need to do special things when pte's
- * within a page table are directly modified.  Thus, the following
- * hook is made available.
- */
-#define set_pte(pteptr, pteval)					\
-	do{							\
-		*(pteptr) = (pteval);				\
-	} while(0)
-#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval)
-
-
-/* PMD_SHIFT determines the size of the area a second-level page table can map */
-#ifdef CONFIG_SUN3
-#define PMD_SHIFT       17
-#else
-#define PMD_SHIFT	22
-#endif
-#define PMD_SIZE	(1UL << PMD_SHIFT)
-#define PMD_MASK	(~(PMD_SIZE-1))
-
-/* PGDIR_SHIFT determines what a third-level page table entry can map */
-#ifdef CONFIG_SUN3
-#define PGDIR_SHIFT     17
-#elif defined(CONFIG_COLDFIRE)
-#define PGDIR_SHIFT     22
-#else
-#define PGDIR_SHIFT	25
-#endif
-#define PGDIR_SIZE	(1UL << PGDIR_SHIFT)
-#define PGDIR_MASK	(~(PGDIR_SIZE-1))
-
-/*
- * entries per page directory level: the m68k is configured as three-level,
- * so we do have PMD level physically.
- */
-#ifdef CONFIG_SUN3
-#define PTRS_PER_PTE   16
-#define PTRS_PER_PMD   1
-#define PTRS_PER_PGD   2048
-#elif defined(CONFIG_COLDFIRE)
-#define PTRS_PER_PTE	512
-#define PTRS_PER_PMD	1
-#define PTRS_PER_PGD	1024
-#else
-#define PTRS_PER_PTE	1024
-#define PTRS_PER_PMD	8
-#define PTRS_PER_PGD	128
-#endif
-#define USER_PTRS_PER_PGD	(TASK_SIZE/PGDIR_SIZE)
-#define FIRST_USER_ADDRESS	0
-
-/* Virtual address region for use by kernel_map() */
-#ifdef CONFIG_SUN3
-#define KMAP_START     0x0DC00000
-#define KMAP_END       0x0E000000
-#elif defined(CONFIG_COLDFIRE)
-#define KMAP_START	0xe0000000
-#define KMAP_END	0xf0000000
-#else
-#define	KMAP_START	0xd0000000
-#define	KMAP_END	0xf0000000
-#endif
-
-#ifdef CONFIG_SUN3
-extern unsigned long m68k_vmalloc_end;
-#define VMALLOC_START 0x0f800000
-#define VMALLOC_END m68k_vmalloc_end
-#elif defined(CONFIG_COLDFIRE)
-#define VMALLOC_START	0xd0000000
-#define VMALLOC_END	0xe0000000
-#else
-/* Just any arbitrary offset to the start of the vmalloc VM area: the
- * current 8MB value just means that there will be a 8MB "hole" after the
- * physical memory until the kernel virtual memory starts.  That means that
- * any out-of-bounds memory accesses will hopefully be caught.
- * The vmalloc() routines leaves a hole of 4kB between each vmalloced
- * area for the same reason. ;)
- */
-#define VMALLOC_OFFSET	(8*1024*1024)
-#define VMALLOC_START (((unsigned long) high_memory + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1))
-#define VMALLOC_END KMAP_START
-#endif
-
-/* zero page used for uninitialized stuff */
-extern void *empty_zero_page;
-
-/*
- * ZERO_PAGE is a global shared page that is always zero: used
- * for zero-mapped memory areas etc..
- */
-#define ZERO_PAGE(vaddr)	(virt_to_page(empty_zero_page))
-
-/* number of bits that fit into a memory pointer */
-#define BITS_PER_PTR			(8*sizeof(unsigned long))
-
-/* to align the pointer to a pointer address */
-#define PTR_MASK			(~(sizeof(void*)-1))
-
-/* sizeof(void*)==1<<SIZEOF_PTR_LOG2 */
-/* 64-bit machines, beware!  SRB. */
-#define SIZEOF_PTR_LOG2			       2
-
-extern void kernel_set_cachemode(void *addr, unsigned long size, int cmode);
-
-/*
- * The m68k doesn't have any external MMU info: the kernel page
- * tables contain all the necessary information.  The Sun3 does, but
- * they are updated on demand.
- */
-static inline void update_mmu_cache(struct vm_area_struct *vma,
-				    unsigned long address, pte_t *ptep)
-{
-}
-
-#endif /* !__ASSEMBLY__ */
-
-#define kern_addr_valid(addr)	(1)
-
-#define io_remap_pfn_range(vma, vaddr, pfn, size, prot)		\
-		remap_pfn_range(vma, vaddr, pfn, size, prot)
-
-/* MMU-specific headers */
-
-#ifdef CONFIG_SUN3
-#include <asm/sun3_pgtable.h>
-#elif defined(CONFIG_COLDFIRE)
-#include <asm/mcf_pgtable.h>
-#else
-#include <asm/motorola_pgtable.h>
-#endif
-
-#ifndef __ASSEMBLY__
-/*
- * Macro to mark a page protection value as "uncacheable".
- */
-#ifdef CONFIG_COLDFIRE
-# define pgprot_noncached(prot) (__pgprot(pgprot_val(prot) | CF_PAGE_NOCACHE))
-#else
-#ifdef SUN3_PAGE_NOCACHE
-# define __SUN3_PAGE_NOCACHE	SUN3_PAGE_NOCACHE
-#else
-# define __SUN3_PAGE_NOCACHE	0
-#endif
-#define pgprot_noncached(prot)							\
-	(MMU_IS_SUN3								\
-	 ? (__pgprot(pgprot_val(prot) | __SUN3_PAGE_NOCACHE))			\
-	 : ((MMU_IS_851 || MMU_IS_030)						\
-	    ? (__pgprot(pgprot_val(prot) | _PAGE_NOCACHE030))			\
-	    : (MMU_IS_040 || MMU_IS_060)					\
-	    ? (__pgprot((pgprot_val(prot) & _CACHEMASK040) | _PAGE_NOCACHE_S))	\
-	    : (prot)))
-
-#endif /* CONFIG_COLDFIRE */
-#include <asm-generic/pgtable.h>
-#endif /* !__ASSEMBLY__ */
-
-/*
- * No page table caches to initialise
- */
-#define pgtable_cache_init()	do { } while (0)
-
-#define check_pgt_cache()	do { } while (0)
-
-#endif /* _M68K_PGTABLE_H */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/pgtable_no.h b/ANDROID_3.4.5/arch/m68k/include/asm/pgtable_no.h
deleted file mode 100644
index bf86b29f..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/pgtable_no.h
+++ /dev/null
@@ -1,72 +0,0 @@
-#ifndef _M68KNOMMU_PGTABLE_H
-#define _M68KNOMMU_PGTABLE_H
-
-#include <asm-generic/4level-fixup.h>
-
-/*
- * (C) Copyright 2000-2002, Greg Ungerer <gerg@snapgear.com>
- */
-
-#include <linux/slab.h>
-#include <asm/processor.h>
-#include <asm/page.h>
-#include <asm/io.h>
-
-/*
- * Trivial page table functions.
- */
-#define pgd_present(pgd)	(1)
-#define pgd_none(pgd)		(0)
-#define pgd_bad(pgd)		(0)
-#define pgd_clear(pgdp)
-#define kern_addr_valid(addr)	(1)
-#define	pmd_offset(a, b)	((void *)0)
-
-#define PAGE_NONE	__pgprot(0)
-#define PAGE_SHARED	__pgprot(0)
-#define PAGE_COPY	__pgprot(0)
-#define PAGE_READONLY	__pgprot(0)
-#define PAGE_KERNEL	__pgprot(0)
-
-extern void paging_init(void);
-#define swapper_pg_dir ((pgd_t *) 0)
-
-#define __swp_type(x)		(0)
-#define __swp_offset(x)		(0)
-#define __swp_entry(typ,off)	((swp_entry_t) { ((typ) | ((off) << 7)) })
-#define __pte_to_swp_entry(pte)	((swp_entry_t) { pte_val(pte) })
-#define __swp_entry_to_pte(x)	((pte_t) { (x).val })
-
-static inline int pte_file(pte_t pte) { return 0; }
-
-/*
- * ZERO_PAGE is a global shared page that is always zero: used
- * for zero-mapped memory areas etc..
- */
-#define ZERO_PAGE(vaddr)	(virt_to_page(0))
-
-/*
- * These would be in other places but having them here reduces the diffs.
- */
-extern unsigned int kobjsize(const void *objp);
-
-/*
- * No page table caches to initialise.
- */
-#define pgtable_cache_init()	do { } while (0)
-
-#define io_remap_pfn_range(vma, vaddr, pfn, size, prot)		\
-		remap_pfn_range(vma, vaddr, pfn, size, prot)
-
-/*
- * All 32bit addresses are effectively valid for vmalloc...
- * Sort of meaningless for non-VM targets.
- */
-#define	VMALLOC_START	0
-#define	VMALLOC_END	0xffffffff
-
-#include <asm-generic/pgtable.h>
-
-#define check_pgt_cache()	do { } while (0)
-
-#endif /* _M68KNOMMU_PGTABLE_H */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/pinmux.h b/ANDROID_3.4.5/arch/m68k/include/asm/pinmux.h
deleted file mode 100644
index 119ee686..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/pinmux.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- * Coldfire generic GPIO pinmux support.
- *
- * (C) Copyright 2009, Steven King <sfking@fdwdc.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef pinmux_h
-#define pinmux_h
-
-#define MCFPINMUX_NONE		-1
-
-extern int mcf_pinmux_request(unsigned, unsigned);
-extern void mcf_pinmux_release(unsigned, unsigned);
-
-static inline int mcf_pinmux_is_valid(unsigned pinmux)
-{
-	return pinmux != MCFPINMUX_NONE;
-}
-
-#endif
-
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/poll.h b/ANDROID_3.4.5/arch/m68k/include/asm/poll.h
deleted file mode 100644
index f080fcdb..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/poll.h
+++ /dev/null
@@ -1,9 +0,0 @@
-#ifndef __m68k_POLL_H
-#define __m68k_POLL_H
-
-#define POLLWRNORM	POLLOUT
-#define POLLWRBAND	256
-
-#include <asm-generic/poll.h>
-
-#endif
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/posix_types.h b/ANDROID_3.4.5/arch/m68k/include/asm/posix_types.h
deleted file mode 100644
index 6373093b..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/posix_types.h
+++ /dev/null
@@ -1,28 +0,0 @@
-#ifndef __ARCH_M68K_POSIX_TYPES_H
-#define __ARCH_M68K_POSIX_TYPES_H
-
-/*
- * This file is generally used by user-level software, so you need to
- * be a little careful about namespace pollution etc.  Also, we cannot
- * assume GCC is being used.
- */
-
-typedef unsigned short	__kernel_mode_t;
-#define __kernel_mode_t __kernel_mode_t
-
-typedef unsigned short	__kernel_nlink_t;
-#define __kernel_nlink_t __kernel_nlink_t
-
-typedef unsigned short	__kernel_ipc_pid_t;
-#define __kernel_ipc_pid_t __kernel_ipc_pid_t
-
-typedef unsigned short	__kernel_uid_t;
-typedef unsigned short	__kernel_gid_t;
-#define __kernel_uid_t __kernel_uid_t
-
-typedef unsigned short	__kernel_old_dev_t;
-#define __kernel_old_dev_t __kernel_old_dev_t
-
-#include <asm-generic/posix_types.h>
-
-#endif
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/processor.h b/ANDROID_3.4.5/arch/m68k/include/asm/processor.h
deleted file mode 100644
index 46460fa1..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/processor.h
+++ /dev/null
@@ -1,185 +0,0 @@
-/*
- * include/asm-m68k/processor.h
- *
- * Copyright (C) 1995 Hamish Macdonald
- */
-
-#ifndef __ASM_M68K_PROCESSOR_H
-#define __ASM_M68K_PROCESSOR_H
-
-/*
- * Default implementation of macro that returns current
- * instruction pointer ("program counter").
- */
-#define current_text_addr() ({ __label__ _l; _l: &&_l;})
-
-#include <linux/thread_info.h>
-#include <asm/segment.h>
-#include <asm/fpu.h>
-#include <asm/ptrace.h>
-
-static inline unsigned long rdusp(void)
-{
-#ifdef CONFIG_COLDFIRE_SW_A7
-	extern unsigned int sw_usp;
-	return sw_usp;
-#else
-	register unsigned long usp __asm__("a0");
-	/* move %usp,%a0 */
-	__asm__ __volatile__(".word 0x4e68" : "=a" (usp));
-	return usp;
-#endif
-}
-
-static inline void wrusp(unsigned long usp)
-{
-#ifdef CONFIG_COLDFIRE_SW_A7
-	extern unsigned int sw_usp;
-	sw_usp = usp;
-#else
-	register unsigned long a0 __asm__("a0") = usp;
-	/* move %a0,%usp */
-	__asm__ __volatile__(".word 0x4e60" : : "a" (a0) );
-#endif
-}
-
-/*
- * User space process size: 3.75GB. This is hardcoded into a few places,
- * so don't change it unless you know what you are doing.
- */
-#ifdef CONFIG_MMU
-#if defined(CONFIG_COLDFIRE)
-#define TASK_SIZE	(0xC0000000UL)
-#elif defined(CONFIG_SUN3)
-#define TASK_SIZE	(0x0E000000UL)
-#else
-#define TASK_SIZE	(0xF0000000UL)
-#endif
-#else
-#define TASK_SIZE	(0xFFFFFFFFUL)
-#endif
-
-#ifdef __KERNEL__
-#define STACK_TOP	TASK_SIZE
-#define STACK_TOP_MAX	STACK_TOP
-#endif
-
-/* This decides where the kernel will search for a free chunk of vm
- * space during mmap's.
- */
-#ifdef CONFIG_MMU
-#if defined(CONFIG_COLDFIRE)
-#define TASK_UNMAPPED_BASE	0x60000000UL
-#elif defined(CONFIG_SUN3)
-#define TASK_UNMAPPED_BASE	0x0A000000UL
-#else
-#define TASK_UNMAPPED_BASE	0xC0000000UL
-#endif
-#define TASK_UNMAPPED_ALIGN(addr, off)	PAGE_ALIGN(addr)
-#else
-#define TASK_UNMAPPED_BASE	0
-#endif
-
-struct thread_struct {
-	unsigned long  ksp;		/* kernel stack pointer */
-	unsigned long  usp;		/* user stack pointer */
-	unsigned short sr;		/* saved status register */
-	unsigned short fs;		/* saved fs (sfc, dfc) */
-	unsigned long  crp[2];		/* cpu root pointer */
-	unsigned long  esp0;		/* points to SR of stack frame */
-	unsigned long  faddr;		/* info about last fault */
-	int            signo, code;
-	unsigned long  fp[8*3];
-	unsigned long  fpcntl[3];	/* fp control regs */
-	unsigned char  fpstate[FPSTATESIZE];  /* floating point state */
-};
-
-#define INIT_THREAD  {							\
-	.ksp	= sizeof(init_stack) + (unsigned long) init_stack,	\
-	.sr	= PS_S,							\
-	.fs	= __KERNEL_DS,						\
-}
-
-#ifdef CONFIG_MMU
-/*
- * Do necessary setup to start up a newly executed thread.
- */
-static inline void start_thread(struct pt_regs * regs, unsigned long pc,
-				unsigned long usp)
-{
-	regs->pc = pc;
-	regs->sr &= ~0x2000;
-	wrusp(usp);
-}
-
-extern int handle_kernel_fault(struct pt_regs *regs);
-
-#else
-
-/*
- * Coldfire stacks need to be re-aligned on trap exit, conventional
- * 68k can handle this case cleanly.
- */
-#ifdef CONFIG_COLDFIRE
-#define reformat(_regs)		do { (_regs)->format = 0x4; } while(0)
-#else
-#define reformat(_regs)		do { } while (0)
-#endif
-
-#define start_thread(_regs, _pc, _usp)                  \
-do {                                                    \
-	(_regs)->pc = (_pc);                            \
-	((struct switch_stack *)(_regs))[-1].a6 = 0;    \
-	reformat(_regs);                                \
-	if (current->mm)                                \
-		(_regs)->d5 = current->mm->start_data;  \
-	(_regs)->sr &= ~0x2000;                         \
-	wrusp(_usp);                                    \
-} while(0)
-
-static inline  int handle_kernel_fault(struct pt_regs *regs)
-{
-	/* Any fault in kernel is fatal on non-mmu */
-	return 0;
-}
-
-#endif
-
-/* Forward declaration, a strange C thing */
-struct task_struct;
-
-/* Free all resources held by a thread. */
-static inline void release_thread(struct task_struct *dead_task)
-{
-}
-
-/* Prepare to copy thread state - unlazy all lazy status */
-#define prepare_to_copy(tsk)	do { } while (0)
-
-extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags);
-
-/*
- * Free current thread data structures etc..
- */
-static inline void exit_thread(void)
-{
-}
-
-extern unsigned long thread_saved_pc(struct task_struct *tsk);
-
-unsigned long get_wchan(struct task_struct *p);
-
-#define	KSTK_EIP(tsk)	\
-    ({			\
-	unsigned long eip = 0;	 \
-	if ((tsk)->thread.esp0 > PAGE_SIZE && \
-	    (virt_addr_valid((tsk)->thread.esp0))) \
-	      eip = ((struct pt_regs *) (tsk)->thread.esp0)->pc; \
-	eip; })
-#define	KSTK_ESP(tsk)	((tsk) == current ? rdusp() : (tsk)->thread.usp)
-
-#define task_pt_regs(tsk)	((struct pt_regs *) ((tsk)->thread.esp0))
-
-#define cpu_relax()	barrier()
-
-#endif
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/ptrace.h b/ANDROID_3.4.5/arch/m68k/include/asm/ptrace.h
deleted file mode 100644
index 65322b17..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/ptrace.h
+++ /dev/null
@@ -1,97 +0,0 @@
-#ifndef _M68K_PTRACE_H
-#define _M68K_PTRACE_H
-
-#define PT_D1	   0
-#define PT_D2	   1
-#define PT_D3	   2
-#define PT_D4	   3
-#define PT_D5	   4
-#define PT_D6	   5
-#define PT_D7	   6
-#define PT_A0	   7
-#define PT_A1	   8
-#define PT_A2	   9
-#define PT_A3	   10
-#define PT_A4	   11
-#define PT_A5	   12
-#define PT_A6	   13
-#define PT_D0	   14
-#define PT_USP	   15
-#define PT_ORIG_D0 16
-#define PT_SR	   17
-#define PT_PC	   18
-
-#ifndef __ASSEMBLY__
-
-/* this struct defines the way the registers are stored on the
-   stack during a system call. */
-
-struct pt_regs {
-  long     d1;
-  long     d2;
-  long     d3;
-  long     d4;
-  long     d5;
-  long     a0;
-  long     a1;
-  long     a2;
-  long     d0;
-  long     orig_d0;
-  long     stkadj;
-#ifdef CONFIG_COLDFIRE
-  unsigned format :  4; /* frame format specifier */
-  unsigned vector : 12; /* vector offset */
-  unsigned short sr;
-  unsigned long  pc;
-#else
-  unsigned short sr;
-  unsigned long  pc;
-  unsigned format :  4; /* frame format specifier */
-  unsigned vector : 12; /* vector offset */
-#endif
-};
-
-/*
- * This is the extended stack used by signal handlers and the context
- * switcher: it's pushed after the normal "struct pt_regs".
- */
-struct switch_stack {
-	unsigned long  d6;
-	unsigned long  d7;
-	unsigned long  a3;
-	unsigned long  a4;
-	unsigned long  a5;
-	unsigned long  a6;
-	unsigned long  retpc;
-};
-
-/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */
-#define PTRACE_GETREGS            12
-#define PTRACE_SETREGS            13
-#define PTRACE_GETFPREGS          14
-#define PTRACE_SETFPREGS          15
-
-#define PTRACE_GET_THREAD_AREA    25
-
-#define PTRACE_SINGLEBLOCK	33	/* resume execution until next branch */
-
-#ifdef __KERNEL__
-
-#ifndef PS_S
-#define PS_S  (0x2000)
-#define PS_M  (0x1000)
-#endif
-
-#define user_mode(regs) (!((regs)->sr & PS_S))
-#define instruction_pointer(regs) ((regs)->pc)
-#define profile_pc(regs) instruction_pointer(regs)
-
-#define arch_has_single_step()	(1)
-
-#ifdef CONFIG_MMU
-#define arch_has_block_step()	(1)
-#endif
-
-#endif /* __KERNEL__ */
-#endif /* __ASSEMBLY__ */
-#endif /* _M68K_PTRACE_H */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/q40_master.h b/ANDROID_3.4.5/arch/m68k/include/asm/q40_master.h
deleted file mode 100644
index 3907a09d..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/q40_master.h
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- * Q40 master Chip Control
- * RTC stuff merged for compactnes..
-*/
-
-#ifndef _Q40_MASTER_H
-#define _Q40_MASTER_H
-
-#include <asm/raw_io.h>
-
-
-#define q40_master_addr 0xff000000
-
-#define IIRQ_REG            0x0       /* internal IRQ reg */
-#define EIRQ_REG            0x4       /* external ... */
-#define KEYCODE_REG         0x1c      /* value of received scancode  */
-#define DISPLAY_CONTROL_REG 0x18
-#define FRAME_CLEAR_REG     0x24
-#define LED_REG             0x30
-
-#define Q40_LED_ON()        master_outb(1,LED_REG)
-#define Q40_LED_OFF()       master_outb(0,LED_REG)
-
-#define INTERRUPT_REG       IIRQ_REG  /* "native" ints */
-#define KEY_IRQ_ENABLE_REG  0x08      /**/
-#define KEYBOARD_UNLOCK_REG 0x20      /* clear kb int */
-
-#define SAMPLE_ENABLE_REG   0x14      /* generate SAMPLE ints */
-#define SAMPLE_RATE_REG     0x2c
-#define SAMPLE_CLEAR_REG    0x28
-#define SAMPLE_LOW          0x00
-#define SAMPLE_HIGH         0x01
-
-#define FRAME_RATE_REG       0x38      /* generate FRAME ints at 200 HZ rate */
-
-#if 0
-#define SER_ENABLE_REG      0x0c      /* allow serial ints to be generated */
-#endif
-#define EXT_ENABLE_REG      0x10      /* ... rest of the ISA ints ... */
-
-
-#define master_inb(_reg_)      in_8((unsigned char *)q40_master_addr+_reg_)
-#define master_outb(_b_,_reg_)  out_8((unsigned char *)q40_master_addr+_reg_,_b_)
-
-/* RTC defines */
-
-#define Q40_RTC_BASE	    (0xff021ffc)
-
-#define Q40_RTC_YEAR        (*(volatile unsigned char *)(Q40_RTC_BASE+0))
-#define Q40_RTC_MNTH        (*(volatile unsigned char *)(Q40_RTC_BASE-4))
-#define Q40_RTC_DATE        (*(volatile unsigned char *)(Q40_RTC_BASE-8))
-#define Q40_RTC_DOW         (*(volatile unsigned char *)(Q40_RTC_BASE-12))
-#define Q40_RTC_HOUR        (*(volatile unsigned char *)(Q40_RTC_BASE-16))
-#define Q40_RTC_MINS        (*(volatile unsigned char *)(Q40_RTC_BASE-20))
-#define Q40_RTC_SECS        (*(volatile unsigned char *)(Q40_RTC_BASE-24))
-#define Q40_RTC_CTRL        (*(volatile unsigned char *)(Q40_RTC_BASE-28))
-
-/* some control bits */
-#define Q40_RTC_READ   64  /* prepare for reading */
-#define Q40_RTC_WRITE  128
-
-/* define some Q40 specific ints */
-#include "q40ints.h"
-
-/* misc defs */
-#define DAC_LEFT  ((unsigned char *)0xff008000)
-#define DAC_RIGHT ((unsigned char *)0xff008004)
-
-#endif /* _Q40_MASTER_H */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/q40ints.h b/ANDROID_3.4.5/arch/m68k/include/asm/q40ints.h
deleted file mode 100644
index 22f12c9e..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/q40ints.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * contains some Q40 related interrupt definitions
- */
-
-#define Q40_IRQ_MAX      (34)
-
-#define Q40_IRQ_SAMPLE    (34)
-#define Q40_IRQ_KEYBOARD (32)
-#define Q40_IRQ_FRAME    (33)
-
-
-/* masks for interrupt regiosters*/
-/* internal, IIRQ_REG */
-#define Q40_IRQ_KEYB_MASK    (2)
-#define Q40_IRQ_SER_MASK     (1<<2)
-#define Q40_IRQ_FRAME_MASK   (1<<3)
-#define Q40_IRQ_EXT_MASK     (1<<4)    /* is a EIRQ */
-/* eirq, EIRQ_REG */
-#define Q40_IRQ3_MASK        (1)
-#define Q40_IRQ4_MASK        (1<<1)
-#define Q40_IRQ5_MASK        (1<<2)
-#define Q40_IRQ6_MASK        (1<<3)
-#define Q40_IRQ7_MASK        (1<<4)
-#define Q40_IRQ10_MASK       (1<<5)
-#define Q40_IRQ14_MASK       (1<<6)
-#define Q40_IRQ15_MASK       (1<<7)
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/quicc_simple.h b/ANDROID_3.4.5/arch/m68k/include/asm/quicc_simple.h
deleted file mode 100644
index c3636932..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/quicc_simple.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/***********************************
- * $Id: quicc_simple.h,v 1.1 2002/03/02 15:01:10 gerg Exp $
- ***********************************
- *
- ***************************************
- * Simple drivers common header
- ***************************************
- */
-
-#ifndef __SIMPLE_H
-#define __SIMPLE_H
-
-/* #include "quicc.h" */
-
-#define GLB_SCC_0   0
-#define GLB_SCC_1   1
-#define GLB_SCC_2   2
-#define GLB_SCC_3   3
-
-typedef void (int_routine)(unsigned short interrupt_event);
-typedef int_routine *int_routine_ptr; 
-typedef void *(alloc_routine)(int length);
-typedef void (free_routine)(int scc_num, int channel_num, void *buf);
-typedef void (store_rx_buffer_routine)(int scc_num, int channel_num, void *buff, int length);
-typedef int  (handle_tx_error_routine)(int scc_num, int channel_num, QUICC_BD *tbd);
-typedef void (handle_rx_error_routine)(int scc_num, int channel_num, QUICC_BD *rbd);
-typedef void (handle_lost_error_routine)(int scc_num, int channel_num);
-
-/* user defined functions for global errors */
-typedef void (handle_glob_overrun_routine)(int scc_number);
-typedef void (handle_glob_underrun_routine)(int scc_number);
-typedef void (glob_intr_q_overflow_routine)(int scc_number);
-
-/*
- * General initialization and command routines
- */
-void quicc_issue_cmd (unsigned short cmd, int scc_num);
-void quicc_init(void);
-void quicc_scc_init(int scc_number, int number_of_rx_buf, int number_of_tx_buf);
-void quicc_smc_init(int smc_number, int number_of_rx_buf, int number_of_tx_buf);
-void quicc_scc_start(int scc_num);
-void quicc_scc_loopback(int scc_num);
-
-/* Interrupt enable/disable routines for critical pieces of code*/
-unsigned short  IntrDis(void);
-void            IntrEna(unsigned short old_sr);
-
-/* For debugging */
-void print_rbd(int scc_num);
-void print_tbd(int scc_num);
-
-#endif
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/raw_io.h b/ANDROID_3.4.5/arch/m68k/include/asm/raw_io.h
deleted file mode 100644
index d9eb9834..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/raw_io.h
+++ /dev/null
@@ -1,347 +0,0 @@
-/*
- * linux/include/asm-m68k/raw_io.h
- *
- * 10/20/00 RZ: - created from bits of io.h and ide.h to cleanup namespace
- *
- */
-
-#ifndef _RAW_IO_H
-#define _RAW_IO_H
-
-#ifdef __KERNEL__
-
-#include <asm/types.h>
-
-
-/* Values for nocacheflag and cmode */
-#define IOMAP_FULL_CACHING		0
-#define IOMAP_NOCACHE_SER		1
-#define IOMAP_NOCACHE_NONSER		2
-#define IOMAP_WRITETHROUGH		3
-
-extern void iounmap(void __iomem *addr);
-
-extern void __iomem *__ioremap(unsigned long physaddr, unsigned long size,
-		       int cacheflag);
-extern void __iounmap(void *addr, unsigned long size);
-
-
-/* ++roman: The assignments to temp. vars avoid that gcc sometimes generates
- * two accesses to memory, which may be undesirable for some devices.
- */
-#define in_8(addr) \
-    ({ u8 __v = (*(__force volatile u8 *) (addr)); __v; })
-#define in_be16(addr) \
-    ({ u16 __v = (*(__force volatile u16 *) (addr)); __v; })
-#define in_be32(addr) \
-    ({ u32 __v = (*(__force volatile u32 *) (addr)); __v; })
-#define in_le16(addr) \
-    ({ u16 __v = le16_to_cpu(*(__force volatile __le16 *) (addr)); __v; })
-#define in_le32(addr) \
-    ({ u32 __v = le32_to_cpu(*(__force volatile __le32 *) (addr)); __v; })
-
-#define out_8(addr,b) (void)((*(__force volatile u8 *) (addr)) = (b))
-#define out_be16(addr,w) (void)((*(__force volatile u16 *) (addr)) = (w))
-#define out_be32(addr,l) (void)((*(__force volatile u32 *) (addr)) = (l))
-#define out_le16(addr,w) (void)((*(__force volatile __le16 *) (addr)) = cpu_to_le16(w))
-#define out_le32(addr,l) (void)((*(__force volatile __le32 *) (addr)) = cpu_to_le32(l))
-
-#define raw_inb in_8
-#define raw_inw in_be16
-#define raw_inl in_be32
-#define __raw_readb in_8
-#define __raw_readw in_be16
-#define __raw_readl in_be32
-
-#define raw_outb(val,port) out_8((port),(val))
-#define raw_outw(val,port) out_be16((port),(val))
-#define raw_outl(val,port) out_be32((port),(val))
-#define __raw_writeb(val,addr) out_8((addr),(val))
-#define __raw_writew(val,addr) out_be16((addr),(val))
-#define __raw_writel(val,addr) out_be32((addr),(val))
-
-static inline void raw_insb(volatile u8 __iomem *port, u8 *buf, unsigned int len)
-{
-	unsigned int i;
-
-        for (i = 0; i < len; i++)
-		*buf++ = in_8(port);
-}
-
-static inline void raw_outsb(volatile u8 __iomem *port, const u8 *buf,
-			     unsigned int len)
-{
-	unsigned int i;
-
-        for (i = 0; i < len; i++)
-		out_8(port, *buf++);
-}
-
-static inline void raw_insw(volatile u16 __iomem *port, u16 *buf, unsigned int nr)
-{
-	unsigned int tmp;
-
-	if (nr & 15) {
-		tmp = (nr & 15) - 1;
-		asm volatile (
-			"1: movew %2@,%0@+; dbra %1,1b"
-			: "=a" (buf), "=d" (tmp)
-			: "a" (port), "0" (buf),
-			  "1" (tmp));
-	}
-	if (nr >> 4) {
-		tmp = (nr >> 4) - 1;
-		asm volatile (
-			"1: "
-			"movew %2@,%0@+; "
-			"movew %2@,%0@+; "
-			"movew %2@,%0@+; "
-			"movew %2@,%0@+; "
-			"movew %2@,%0@+; "
-			"movew %2@,%0@+; "
-			"movew %2@,%0@+; "
-			"movew %2@,%0@+; "
-			"movew %2@,%0@+; "
-			"movew %2@,%0@+; "
-			"movew %2@,%0@+; "
-			"movew %2@,%0@+; "
-			"movew %2@,%0@+; "
-			"movew %2@,%0@+; "
-			"movew %2@,%0@+; "
-			"movew %2@,%0@+; "
-			"dbra %1,1b"
-			: "=a" (buf), "=d" (tmp)
-			: "a" (port), "0" (buf),
-			  "1" (tmp));
-	}
-}
-
-static inline void raw_outsw(volatile u16 __iomem *port, const u16 *buf,
-			     unsigned int nr)
-{
-	unsigned int tmp;
-
-	if (nr & 15) {
-		tmp = (nr & 15) - 1;
-		asm volatile (
-			"1: movew %0@+,%2@; dbra %1,1b"
-			: "=a" (buf), "=d" (tmp)
-			: "a" (port), "0" (buf),
-			  "1" (tmp));
-	}
-	if (nr >> 4) {
-		tmp = (nr >> 4) - 1;
-		asm volatile (
-			"1: "
-			"movew %0@+,%2@; "
-			"movew %0@+,%2@; "
-			"movew %0@+,%2@; "
-			"movew %0@+,%2@; "
-			"movew %0@+,%2@; "
-			"movew %0@+,%2@; "
-			"movew %0@+,%2@; "
-			"movew %0@+,%2@; "
-			"movew %0@+,%2@; "
-			"movew %0@+,%2@; "
-			"movew %0@+,%2@; "
-			"movew %0@+,%2@; "
-			"movew %0@+,%2@; "
-			"movew %0@+,%2@; "
-			"movew %0@+,%2@; "
-			"movew %0@+,%2@; "
-			"dbra %1,1b"
-			: "=a" (buf), "=d" (tmp)
-			: "a" (port), "0" (buf),
-			  "1" (tmp));
-	}
-}
-
-static inline void raw_insl(volatile u32 __iomem *port, u32 *buf, unsigned int nr)
-{
-	unsigned int tmp;
-
-	if (nr & 15) {
-		tmp = (nr & 15) - 1;
-		asm volatile (
-			"1: movel %2@,%0@+; dbra %1,1b"
-			: "=a" (buf), "=d" (tmp)
-			: "a" (port), "0" (buf),
-			  "1" (tmp));
-	}
-	if (nr >> 4) {
-		tmp = (nr >> 4) - 1;
-		asm volatile (
-			"1: "
-			"movel %2@,%0@+; "
-			"movel %2@,%0@+; "
-			"movel %2@,%0@+; "
-			"movel %2@,%0@+; "
-			"movel %2@,%0@+; "
-			"movel %2@,%0@+; "
-			"movel %2@,%0@+; "
-			"movel %2@,%0@+; "
-			"movel %2@,%0@+; "
-			"movel %2@,%0@+; "
-			"movel %2@,%0@+; "
-			"movel %2@,%0@+; "
-			"movel %2@,%0@+; "
-			"movel %2@,%0@+; "
-			"movel %2@,%0@+; "
-			"movel %2@,%0@+; "
-			"dbra %1,1b"
-			: "=a" (buf), "=d" (tmp)
-			: "a" (port), "0" (buf),
-			  "1" (tmp));
-	}
-}
-
-static inline void raw_outsl(volatile u32 __iomem *port, const u32 *buf,
-			     unsigned int nr)
-{
-	unsigned int tmp;
-
-	if (nr & 15) {
-		tmp = (nr & 15) - 1;
-		asm volatile (
-			"1: movel %0@+,%2@; dbra %1,1b"
-			: "=a" (buf), "=d" (tmp)
-			: "a" (port), "0" (buf),
-			  "1" (tmp));
-	}
-	if (nr >> 4) {
-		tmp = (nr >> 4) - 1;
-		asm volatile (
-			"1: "
-			"movel %0@+,%2@; "
-			"movel %0@+,%2@; "
-			"movel %0@+,%2@; "
-			"movel %0@+,%2@; "
-			"movel %0@+,%2@; "
-			"movel %0@+,%2@; "
-			"movel %0@+,%2@; "
-			"movel %0@+,%2@; "
-			"movel %0@+,%2@; "
-			"movel %0@+,%2@; "
-			"movel %0@+,%2@; "
-			"movel %0@+,%2@; "
-			"movel %0@+,%2@; "
-			"movel %0@+,%2@; "
-			"movel %0@+,%2@; "
-			"movel %0@+,%2@; "
-			"dbra %1,1b"
-			: "=a" (buf), "=d" (tmp)
-			: "a" (port), "0" (buf),
-			  "1" (tmp));
-	}
-}
-
-
-static inline void raw_insw_swapw(volatile u16 __iomem *port, u16 *buf,
-				  unsigned int nr)
-{
-    if ((nr) % 8)
-	__asm__ __volatile__
-	       ("\tmovel %0,%/a0\n\t"
-		"movel %1,%/a1\n\t"
-		"movel %2,%/d6\n\t"
-		"subql #1,%/d6\n"
-		"1:\tmovew %/a0@,%/d0\n\t"
-		"rolw  #8,%/d0\n\t"
-		"movew %/d0,%/a1@+\n\t"
-		"dbra %/d6,1b"
-		:
-		: "g" (port), "g" (buf), "g" (nr)
-		: "d0", "a0", "a1", "d6");
-    else
-	__asm__ __volatile__
-	       ("movel %0,%/a0\n\t"
-		"movel %1,%/a1\n\t"
-		"movel %2,%/d6\n\t"
-		"lsrl  #3,%/d6\n\t"
-		"subql #1,%/d6\n"
-		"1:\tmovew %/a0@,%/d0\n\t"
-		"rolw  #8,%/d0\n\t"
-		"movew %/d0,%/a1@+\n\t"
-		"movew %/a0@,%/d0\n\t"
-		"rolw  #8,%/d0\n\t"
-		"movew %/d0,%/a1@+\n\t"
-		"movew %/a0@,%/d0\n\t"
-		"rolw  #8,%/d0\n\t"
-		"movew %/d0,%/a1@+\n\t"
-		"movew %/a0@,%/d0\n\t"
-		"rolw  #8,%/d0\n\t"
-		"movew %/d0,%/a1@+\n\t"
-		"movew %/a0@,%/d0\n\t"
-		"rolw  #8,%/d0\n\t"
-		"movew %/d0,%/a1@+\n\t"
-		"movew %/a0@,%/d0\n\t"
-		"rolw  #8,%/d0\n\t"
-		"movew %/d0,%/a1@+\n\t"
-		"movew %/a0@,%/d0\n\t"
-		"rolw  #8,%/d0\n\t"
-		"movew %/d0,%/a1@+\n\t"
-		"movew %/a0@,%/d0\n\t"
-		"rolw  #8,%/d0\n\t"
-		"movew %/d0,%/a1@+\n\t"
-		"dbra %/d6,1b"
-                :
-		: "g" (port), "g" (buf), "g" (nr)
-		: "d0", "a0", "a1", "d6");
-}
-
-static inline void raw_outsw_swapw(volatile u16 __iomem *port, const u16 *buf,
-				   unsigned int nr)
-{
-    if ((nr) % 8)
-	__asm__ __volatile__
-	       ("movel %0,%/a0\n\t"
-		"movel %1,%/a1\n\t"
-		"movel %2,%/d6\n\t"
-		"subql #1,%/d6\n"
-		"1:\tmovew %/a1@+,%/d0\n\t"
-		"rolw  #8,%/d0\n\t"
-		"movew %/d0,%/a0@\n\t"
-		"dbra %/d6,1b"
-                :
-		: "g" (port), "g" (buf), "g" (nr)
-		: "d0", "a0", "a1", "d6");
-    else
-	__asm__ __volatile__
-	       ("movel %0,%/a0\n\t"
-		"movel %1,%/a1\n\t"
-		"movel %2,%/d6\n\t"
-		"lsrl  #3,%/d6\n\t"
-		"subql #1,%/d6\n"
-		"1:\tmovew %/a1@+,%/d0\n\t"
-		"rolw  #8,%/d0\n\t"
-		"movew %/d0,%/a0@\n\t"
-		"movew %/a1@+,%/d0\n\t"
-		"rolw  #8,%/d0\n\t"
-		"movew %/d0,%/a0@\n\t"
-		"movew %/a1@+,%/d0\n\t"
-		"rolw  #8,%/d0\n\t"
-		"movew %/d0,%/a0@\n\t"
-		"movew %/a1@+,%/d0\n\t"
-		"rolw  #8,%/d0\n\t"
-		"movew %/d0,%/a0@\n\t"
-		"movew %/a1@+,%/d0\n\t"
-		"rolw  #8,%/d0\n\t"
-		"movew %/d0,%/a0@\n\t"
-		"movew %/a1@+,%/d0\n\t"
-		"rolw  #8,%/d0\n\t"
-		"movew %/d0,%/a0@\n\t"
-		"movew %/a1@+,%/d0\n\t"
-		"rolw  #8,%/d0\n\t"
-		"movew %/d0,%/a0@\n\t"
-		"movew %/a1@+,%/d0\n\t"
-		"rolw  #8,%/d0\n\t"
-		"movew %/d0,%/a0@\n\t"
-		"dbra %/d6,1b"
-                :
-		: "g" (port), "g" (buf), "g" (nr)
-		: "d0", "a0", "a1", "d6");
-}
-
-#endif /* __KERNEL__ */
-
-#endif /* _RAW_IO_H */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/resource.h b/ANDROID_3.4.5/arch/m68k/include/asm/resource.h
deleted file mode 100644
index e7d35019..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/resource.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _M68K_RESOURCE_H
-#define _M68K_RESOURCE_H
-
-#include <asm-generic/resource.h>
-
-#endif /* _M68K_RESOURCE_H */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/rtc.h b/ANDROID_3.4.5/arch/m68k/include/asm/rtc.h
deleted file mode 100644
index a4d08ea1..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/rtc.h
+++ /dev/null
@@ -1,79 +0,0 @@
-/* include/asm-m68k/rtc.h
- *
- * Copyright Richard Zidlicky
- * implementation details for genrtc/q40rtc driver
- */
-/* permission is hereby granted to copy, modify and redistribute this code
- * in terms of the GNU Library General Public License, Version 2 or later,
- * at your option.
- */
-
-#ifndef _ASM_RTC_H
-#define _ASM_RTC_H
-
-#ifdef __KERNEL__
-
-#include <linux/rtc.h>
-#include <asm/errno.h>
-#include <asm/machdep.h>
-
-#define RTC_PIE 0x40		/* periodic interrupt enable */
-#define RTC_AIE 0x20		/* alarm interrupt enable */
-#define RTC_UIE 0x10		/* update-finished interrupt enable */
-
-/* some dummy definitions */
-#define RTC_BATT_BAD 0x100	/* battery bad */
-#define RTC_SQWE 0x08		/* enable square-wave output */
-#define RTC_DM_BINARY 0x04	/* all time/date values are BCD if clear */
-#define RTC_24H 0x02		/* 24 hour mode - else hours bit 7 means pm */
-#define RTC_DST_EN 0x01	        /* auto switch DST - works f. USA only */
-
-static inline unsigned int get_rtc_time(struct rtc_time *time)
-{
-	/*
-	 * Only the values that we read from the RTC are set. We leave
-	 * tm_wday, tm_yday and tm_isdst untouched. Even though the
-	 * RTC has RTC_DAY_OF_WEEK, we ignore it, as it is only updated
-	 * by the RTC when initially set to a non-zero value.
-	 */
-	if (mach_hwclk)
-		mach_hwclk(0, time);
-	return RTC_24H;
-}
-
-static inline int set_rtc_time(struct rtc_time *time)
-{
-	if (mach_hwclk)
-		return mach_hwclk(1, time);
-	return -EINVAL;
-}
-
-static inline unsigned int get_rtc_ss(void)
-{
-	if (mach_get_ss)
-		return mach_get_ss();
-	else{
-		struct rtc_time h;
-
-		get_rtc_time(&h);
-		return h.tm_sec;
-	}
-}
-
-static inline int get_rtc_pll(struct rtc_pll_info *pll)
-{
-	if (mach_get_rtc_pll)
-		return mach_get_rtc_pll(pll);
-	else
-		return -EINVAL;
-}
-static inline int set_rtc_pll(struct rtc_pll_info *pll)
-{
-	if (mach_set_rtc_pll)
-		return mach_set_rtc_pll(pll);
-	else
-		return -EINVAL;
-}
-#endif /* __KERNEL__ */
-
-#endif /* _ASM__RTC_H */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/sbus.h b/ANDROID_3.4.5/arch/m68k/include/asm/sbus.h
deleted file mode 100644
index bfe3ba14..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/sbus.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * some sbus structures and macros to make usage of sbus drivers possible
- */
-
-#ifndef __M68K_SBUS_H
-#define __M68K_SBUS_H
-
-struct sbus_dev {
-	struct {
-		unsigned int which_io;
-		unsigned int phys_addr;
-	} reg_addrs[1];
-};
-
-/* sbus IO functions stolen from include/asm-sparc/io.h for the serial driver */
-/* No SBUS on the Sun3, kludge -- sam */
-
-static inline void _sbus_writeb(unsigned char val, unsigned long addr)
-{
-	*(volatile unsigned char *)addr = val;
-}
-
-static inline unsigned char _sbus_readb(unsigned long addr)
-{
-	return *(volatile unsigned char *)addr;
-}
-
-static inline void _sbus_writel(unsigned long val, unsigned long addr)
-{
-	*(volatile unsigned long *)addr = val;
-
-}
-
-extern inline unsigned long _sbus_readl(unsigned long addr)
-{
-	return *(volatile unsigned long *)addr;
-}
-
-
-#define sbus_readb(a) _sbus_readb((unsigned long)a)
-#define sbus_writeb(v, a) _sbus_writeb(v, (unsigned long)a)
-#define sbus_readl(a) _sbus_readl((unsigned long)a)
-#define sbus_writel(v, a) _sbus_writel(v, (unsigned long)a)
-
-#endif
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/scatterlist.h b/ANDROID_3.4.5/arch/m68k/include/asm/scatterlist.h
deleted file mode 100644
index 31250545..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/scatterlist.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _M68K_SCATTERLIST_H
-#define _M68K_SCATTERLIST_H
-
-#include <asm-generic/scatterlist.h>
-
-#endif /* !(_M68K_SCATTERLIST_H) */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/sections.h b/ANDROID_3.4.5/arch/m68k/include/asm/sections.h
deleted file mode 100644
index 5277e527..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/sections.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef _ASM_M68K_SECTIONS_H
-#define _ASM_M68K_SECTIONS_H
-
-#include <asm-generic/sections.h>
-
-extern char _sbss[], _ebss[];
-
-#endif /* _ASM_M68K_SECTIONS_H */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/segment.h b/ANDROID_3.4.5/arch/m68k/include/asm/segment.h
deleted file mode 100644
index 0fa80e97..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/segment.h
+++ /dev/null
@@ -1,65 +0,0 @@
-#ifndef _M68K_SEGMENT_H
-#define _M68K_SEGMENT_H
-
-/* define constants */
-/* Address spaces (FC0-FC2) */
-#define USER_DATA     (1)
-#ifndef __USER_DS
-#define __USER_DS     (USER_DATA)
-#endif
-#define USER_PROGRAM  (2)
-#define SUPER_DATA    (5)
-#ifndef __KERNEL_DS
-#define __KERNEL_DS   (SUPER_DATA)
-#endif
-#define SUPER_PROGRAM (6)
-#define CPU_SPACE     (7)
-
-#ifndef __ASSEMBLY__
-
-typedef struct {
-	unsigned long seg;
-} mm_segment_t;
-
-#define MAKE_MM_SEG(s)	((mm_segment_t) { (s) })
-
-#ifdef CONFIG_CPU_HAS_ADDRESS_SPACES
-/*
- * Get/set the SFC/DFC registers for MOVES instructions
- */
-#define USER_DS		MAKE_MM_SEG(__USER_DS)
-#define KERNEL_DS	MAKE_MM_SEG(__KERNEL_DS)
-
-static inline mm_segment_t get_fs(void)
-{
-	mm_segment_t _v;
-	__asm__ ("movec %/dfc,%0":"=r" (_v.seg):);
-	return _v;
-}
-
-static inline void set_fs(mm_segment_t val)
-{
-	__asm__ __volatile__ ("movec %0,%/sfc\n\t"
-			      "movec %0,%/dfc\n\t"
-			      : /* no outputs */ : "r" (val.seg) : "memory");
-}
-
-static inline mm_segment_t get_ds(void)
-{
-    /* return the supervisor data space code */
-    return KERNEL_DS;
-}
-
-#else
-#define USER_DS		MAKE_MM_SEG(TASK_SIZE)
-#define KERNEL_DS	MAKE_MM_SEG(0xFFFFFFFF)
-#define get_ds()	(KERNEL_DS)
-#define get_fs()	(current_thread_info()->addr_limit)
-#define set_fs(x)	(current_thread_info()->addr_limit = (x))
-#endif
-
-#define segment_eq(a,b)	((a).seg == (b).seg)
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* _M68K_SEGMENT_H */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/sembuf.h b/ANDROID_3.4.5/arch/m68k/include/asm/sembuf.h
deleted file mode 100644
index 2308052a..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/sembuf.h
+++ /dev/null
@@ -1,25 +0,0 @@
-#ifndef _M68K_SEMBUF_H
-#define _M68K_SEMBUF_H
-
-/*
- * The semid64_ds structure for m68k architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 64-bit time_t to solve y2038 problem
- * - 2 miscellaneous 32-bit values
- */
-
-struct semid64_ds {
-	struct ipc64_perm sem_perm;		/* permissions .. see ipc.h */
-	__kernel_time_t	sem_otime;		/* last semop time */
-	unsigned long	__unused1;
-	__kernel_time_t	sem_ctime;		/* last change time */
-	unsigned long	__unused2;
-	unsigned long	sem_nsems;		/* no. of semaphores in array */
-	unsigned long	__unused3;
-	unsigned long	__unused4;
-};
-
-#endif /* _M68K_SEMBUF_H */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/serial.h b/ANDROID_3.4.5/arch/m68k/include/asm/serial.h
deleted file mode 100644
index 7267536a..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/serial.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * include/asm-m68k/serial.h
- *
- * currently this seems useful only for a Q40,
- * it's an almost exact copy of ../asm-alpha/serial.h
- *
- */
-
-
-/*
- * This assumes you have a 1.8432 MHz clock for your UART.
- *
- * It'd be nice if someone built a serial card with a 24.576 MHz
- * clock, since the 16550A is capable of handling a top speed of 1.5
- * megabits/second; but this requires the faster clock.
- */
-#define BASE_BAUD ( 1843200 / 16 )
-
-/* Standard COM flags (except for COM4, because of the 8514 problem) */
-#ifdef CONFIG_SERIAL_DETECT_IRQ
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ)
-#define STD_COM4_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_AUTO_IRQ)
-#else
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
-#define STD_COM4_FLAGS ASYNC_BOOT_AUTOCONF
-#endif
-
-#ifdef CONFIG_ISA
-#define SERIAL_PORT_DFNS			\
-	/* UART CLK   PORT IRQ     FLAGS        */			\
-	{ 0, BASE_BAUD, 0x3F8, 4, STD_COM_FLAGS },	/* ttyS0 */	\
-	{ 0, BASE_BAUD, 0x2F8, 3, STD_COM_FLAGS },	/* ttyS1 */	\
-	{ 0, BASE_BAUD, 0x3E8, 4, STD_COM_FLAGS },	/* ttyS2 */	\
-	{ 0, BASE_BAUD, 0x2E8, 3, STD_COM4_FLAGS },	/* ttyS3 */
-#endif
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/setup.h b/ANDROID_3.4.5/arch/m68k/include/asm/setup.h
deleted file mode 100644
index 00c2c539..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/setup.h
+++ /dev/null
@@ -1,390 +0,0 @@
-/*
-** asm/setup.h -- Definition of the Linux/m68k setup information
-**
-** Copyright 1992 by Greg Harp
-**
-** This file is subject to the terms and conditions of the GNU General Public
-** License.  See the file COPYING in the main directory of this archive
-** for more details.
-**
-** Created 09/29/92 by Greg Harp
-**
-** 5/2/94 Roman Hodek:
-**   Added bi_atari part of the machine dependent union bi_un; for now it
-**   contains just a model field to distinguish between TT and Falcon.
-** 26/7/96 Roman Zippel:
-**   Renamed to setup.h; added some useful macros to allow gcc some
-**   optimizations if possible.
-** 5/10/96 Geert Uytterhoeven:
-**   Redesign of the boot information structure; moved boot information
-**   structure to bootinfo.h
-*/
-
-#ifndef _M68K_SETUP_H
-#define _M68K_SETUP_H
-
-
-
-    /*
-     *  Linux/m68k Architectures
-     */
-
-#define MACH_AMIGA    1
-#define MACH_ATARI    2
-#define MACH_MAC      3
-#define MACH_APOLLO   4
-#define MACH_SUN3     5
-#define MACH_MVME147  6
-#define MACH_MVME16x  7
-#define MACH_BVME6000 8
-#define MACH_HP300    9
-#define MACH_Q40     10
-#define MACH_SUN3X   11
-#define MACH_M54XX   12
-
-#define COMMAND_LINE_SIZE 256
-
-#ifdef __KERNEL__
-
-#define CL_SIZE COMMAND_LINE_SIZE
-
-#ifndef __ASSEMBLY__
-extern unsigned long m68k_machtype;
-#endif /* !__ASSEMBLY__ */
-
-#if !defined(CONFIG_AMIGA)
-#  define MACH_IS_AMIGA (0)
-#elif defined(CONFIG_ATARI) || defined(CONFIG_MAC) || defined(CONFIG_APOLLO) \
-	|| defined(CONFIG_MVME16x) || defined(CONFIG_BVME6000)               \
-	|| defined(CONFIG_HP300) || defined(CONFIG_Q40)                      \
-	|| defined(CONFIG_SUN3X) || defined(CONFIG_MVME147)
-#  define MACH_IS_AMIGA (m68k_machtype == MACH_AMIGA)
-#else
-#  define MACH_AMIGA_ONLY
-#  define MACH_IS_AMIGA (1)
-#  define MACH_TYPE (MACH_AMIGA)
-#endif
-
-#if !defined(CONFIG_ATARI)
-#  define MACH_IS_ATARI (0)
-#elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_APOLLO) \
-	|| defined(CONFIG_MVME16x) || defined(CONFIG_BVME6000)               \
-	|| defined(CONFIG_HP300) || defined(CONFIG_Q40)                      \
-	|| defined(CONFIG_SUN3X) || defined(CONFIG_MVME147)
-#  define MACH_IS_ATARI (m68k_machtype == MACH_ATARI)
-#else
-#  define MACH_ATARI_ONLY
-#  define MACH_IS_ATARI (1)
-#  define MACH_TYPE (MACH_ATARI)
-#endif
-
-#if !defined(CONFIG_MAC)
-#  define MACH_IS_MAC (0)
-#elif defined(CONFIG_AMIGA) || defined(CONFIG_ATARI) || defined(CONFIG_APOLLO) \
-	|| defined(CONFIG_MVME16x) || defined(CONFIG_BVME6000)                 \
-	|| defined(CONFIG_HP300) || defined(CONFIG_Q40)                        \
-	|| defined(CONFIG_SUN3X) || defined(CONFIG_MVME147)
-#  define MACH_IS_MAC (m68k_machtype == MACH_MAC)
-#else
-#  define MACH_MAC_ONLY
-#  define MACH_IS_MAC (1)
-#  define MACH_TYPE (MACH_MAC)
-#endif
-
-#if defined(CONFIG_SUN3)
-#define MACH_IS_SUN3 (1)
-#define MACH_SUN3_ONLY (1)
-#define MACH_TYPE (MACH_SUN3)
-#else
-#define MACH_IS_SUN3 (0)
-#endif
-
-#if !defined (CONFIG_APOLLO)
-#  define MACH_IS_APOLLO (0)
-#elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_ATARI) \
-	|| defined(CONFIG_MVME16x) || defined(CONFIG_BVME6000)              \
-	|| defined(CONFIG_HP300) || defined(CONFIG_Q40)                     \
-	|| defined(CONFIG_SUN3X) || defined(CONFIG_MVME147)
-#  define MACH_IS_APOLLO (m68k_machtype == MACH_APOLLO)
-#else
-#  define MACH_APOLLO_ONLY
-#  define MACH_IS_APOLLO (1)
-#  define MACH_TYPE (MACH_APOLLO)
-#endif
-
-#if !defined (CONFIG_MVME147)
-#  define MACH_IS_MVME147 (0)
-#elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_ATARI) \
-	|| defined(CONFIG_APOLLO) || defined(CONFIG_BVME6000)               \
-	|| defined(CONFIG_HP300) || defined(CONFIG_Q40)                     \
-	|| defined(CONFIG_SUN3X) || defined(CONFIG_MVME16x)
-#  define MACH_IS_MVME147 (m68k_machtype == MACH_MVME147)
-#else
-#  define MACH_MVME147_ONLY
-#  define MACH_IS_MVME147 (1)
-#  define MACH_TYPE (MACH_MVME147)
-#endif
-
-#if !defined (CONFIG_MVME16x)
-#  define MACH_IS_MVME16x (0)
-#elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_ATARI) \
-	|| defined(CONFIG_APOLLO) || defined(CONFIG_BVME6000)               \
-	|| defined(CONFIG_HP300) || defined(CONFIG_Q40)                     \
-	|| defined(CONFIG_SUN3X) || defined(CONFIG_MVME147)
-#  define MACH_IS_MVME16x (m68k_machtype == MACH_MVME16x)
-#else
-#  define MACH_MVME16x_ONLY
-#  define MACH_IS_MVME16x (1)
-#  define MACH_TYPE (MACH_MVME16x)
-#endif
-
-#if !defined (CONFIG_BVME6000)
-#  define MACH_IS_BVME6000 (0)
-#elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_ATARI) \
-	|| defined(CONFIG_APOLLO) || defined(CONFIG_MVME16x)                \
-	|| defined(CONFIG_HP300) || defined(CONFIG_Q40)                     \
-	|| defined(CONFIG_SUN3X) || defined(CONFIG_MVME147)
-#  define MACH_IS_BVME6000 (m68k_machtype == MACH_BVME6000)
-#else
-#  define MACH_BVME6000_ONLY
-#  define MACH_IS_BVME6000 (1)
-#  define MACH_TYPE (MACH_BVME6000)
-#endif
-
-#if !defined (CONFIG_HP300)
-#  define MACH_IS_HP300 (0)
-#elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_ATARI) \
-	|| defined(CONFIG_APOLLO) || defined(CONFIG_MVME16x) \
-	|| defined(CONFIG_BVME6000) || defined(CONFIG_Q40) \
-	|| defined(CONFIG_SUN3X) || defined(CONFIG_MVME147)
-#  define MACH_IS_HP300 (m68k_machtype == MACH_HP300)
-#else
-#  define MACH_HP300_ONLY
-#  define MACH_IS_HP300 (1)
-#  define MACH_TYPE (MACH_HP300)
-#endif
-
-#if !defined (CONFIG_Q40)
-#  define MACH_IS_Q40 (0)
-#elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_ATARI) \
-	|| defined(CONFIG_APOLLO) || defined(CONFIG_MVME16x)                \
-	|| defined(CONFIG_BVME6000) || defined(CONFIG_HP300)                \
-	|| defined(CONFIG_SUN3X) || defined(CONFIG_MVME147)
-#  define MACH_IS_Q40 (m68k_machtype == MACH_Q40)
-#else
-#  define MACH_Q40_ONLY
-#  define MACH_IS_Q40 (1)
-#  define MACH_TYPE (MACH_Q40)
-#endif
-
-#if !defined (CONFIG_SUN3X)
-#  define MACH_IS_SUN3X (0)
-#elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_ATARI) \
-	|| defined(CONFIG_APOLLO) || defined(CONFIG_MVME16x)                \
-	|| defined(CONFIG_BVME6000) || defined(CONFIG_HP300)                \
-	|| defined(CONFIG_Q40) || defined(CONFIG_MVME147)
-#  define MACH_IS_SUN3X (m68k_machtype == MACH_SUN3X)
-#else
-#  define CONFIG_SUN3X_ONLY
-#  define MACH_IS_SUN3X (1)
-#  define MACH_TYPE (MACH_SUN3X)
-#endif
-
-#ifndef MACH_TYPE
-#  define MACH_TYPE (m68k_machtype)
-#endif
-
-#endif /* __KERNEL__ */
-
-
-    /*
-     *  CPU, FPU and MMU types
-     *
-     *  Note: we may rely on the following equalities:
-     *
-     *      CPU_68020 == MMU_68851
-     *      CPU_68030 == MMU_68030
-     *      CPU_68040 == FPU_68040 == MMU_68040
-     *      CPU_68060 == FPU_68060 == MMU_68060
-     */
-
-#define CPUB_68020     0
-#define CPUB_68030     1
-#define CPUB_68040     2
-#define CPUB_68060     3
-#define CPUB_COLDFIRE  4
-
-#define CPU_68020      (1<<CPUB_68020)
-#define CPU_68030      (1<<CPUB_68030)
-#define CPU_68040      (1<<CPUB_68040)
-#define CPU_68060      (1<<CPUB_68060)
-#define CPU_COLDFIRE   (1<<CPUB_COLDFIRE)
-
-#define FPUB_68881     0
-#define FPUB_68882     1
-#define FPUB_68040     2                       /* Internal FPU */
-#define FPUB_68060     3                       /* Internal FPU */
-#define FPUB_SUNFPA    4                       /* Sun-3 FPA */
-#define FPUB_COLDFIRE  5                       /* ColdFire FPU */
-
-#define FPU_68881      (1<<FPUB_68881)
-#define FPU_68882      (1<<FPUB_68882)
-#define FPU_68040      (1<<FPUB_68040)
-#define FPU_68060      (1<<FPUB_68060)
-#define FPU_SUNFPA     (1<<FPUB_SUNFPA)
-#define FPU_COLDFIRE   (1<<FPUB_COLDFIRE)
-
-#define MMUB_68851     0
-#define MMUB_68030     1                       /* Internal MMU */
-#define MMUB_68040     2                       /* Internal MMU */
-#define MMUB_68060     3                       /* Internal MMU */
-#define MMUB_APOLLO    4                       /* Custom Apollo */
-#define MMUB_SUN3      5                       /* Custom Sun-3 */
-#define MMUB_COLDFIRE  6                       /* Internal MMU */
-
-#define MMU_68851      (1<<MMUB_68851)
-#define MMU_68030      (1<<MMUB_68030)
-#define MMU_68040      (1<<MMUB_68040)
-#define MMU_68060      (1<<MMUB_68060)
-#define MMU_SUN3       (1<<MMUB_SUN3)
-#define MMU_APOLLO     (1<<MMUB_APOLLO)
-#define MMU_COLDFIRE   (1<<MMUB_COLDFIRE)
-
-#ifdef __KERNEL__
-
-#ifndef __ASSEMBLY__
-extern unsigned long m68k_cputype;
-extern unsigned long m68k_fputype;
-extern unsigned long m68k_mmutype;
-#ifdef CONFIG_VME
-extern unsigned long vme_brdtype;
-#endif
-
-    /*
-     *  m68k_is040or060 is != 0 for a '040 or higher;
-     *  used numbers are 4 for 68040 and 6 for 68060.
-     */
-
-extern int m68k_is040or060;
-#endif /* !__ASSEMBLY__ */
-
-#if !defined(CONFIG_M68020)
-#  define CPU_IS_020 (0)
-#  define MMU_IS_851 (0)
-#  define MMU_IS_SUN3 (0)
-#elif defined(CONFIG_M68030) || defined(CONFIG_M68040) || defined(CONFIG_M68060)
-#  define CPU_IS_020 (m68k_cputype & CPU_68020)
-#  define MMU_IS_851 (m68k_mmutype & MMU_68851)
-#  define MMU_IS_SUN3 (0)	/* Sun3 not supported with other CPU enabled */
-#else
-#  define CPU_M68020_ONLY
-#  define CPU_IS_020 (1)
-#ifdef MACH_SUN3_ONLY
-#  define MMU_IS_SUN3 (1)
-#  define MMU_IS_851 (0)
-#else
-#  define MMU_IS_SUN3 (0)
-#  define MMU_IS_851 (1)
-#endif
-#endif
-
-#if !defined(CONFIG_M68030)
-#  define CPU_IS_030 (0)
-#  define MMU_IS_030 (0)
-#elif defined(CONFIG_M68020) || defined(CONFIG_M68040) || defined(CONFIG_M68060)
-#  define CPU_IS_030 (m68k_cputype & CPU_68030)
-#  define MMU_IS_030 (m68k_mmutype & MMU_68030)
-#else
-#  define CPU_M68030_ONLY
-#  define CPU_IS_030 (1)
-#  define MMU_IS_030 (1)
-#endif
-
-#if !defined(CONFIG_M68040)
-#  define CPU_IS_040 (0)
-#  define MMU_IS_040 (0)
-#elif defined(CONFIG_M68020) || defined(CONFIG_M68030) || defined(CONFIG_M68060)
-#  define CPU_IS_040 (m68k_cputype & CPU_68040)
-#  define MMU_IS_040 (m68k_mmutype & MMU_68040)
-#else
-#  define CPU_M68040_ONLY
-#  define CPU_IS_040 (1)
-#  define MMU_IS_040 (1)
-#endif
-
-#if !defined(CONFIG_M68060)
-#  define CPU_IS_060 (0)
-#  define MMU_IS_060 (0)
-#elif defined(CONFIG_M68020) || defined(CONFIG_M68030) || defined(CONFIG_M68040)
-#  define CPU_IS_060 (m68k_cputype & CPU_68060)
-#  define MMU_IS_060 (m68k_mmutype & MMU_68060)
-#else
-#  define CPU_M68060_ONLY
-#  define CPU_IS_060 (1)
-#  define MMU_IS_060 (1)
-#endif
-
-#if !defined(CONFIG_M68020) && !defined(CONFIG_M68030)
-#  define CPU_IS_020_OR_030 (0)
-#else
-#  define CPU_M68020_OR_M68030
-#  if defined(CONFIG_M68040) || defined(CONFIG_M68060)
-#    define CPU_IS_020_OR_030 (!m68k_is040or060)
-#  else
-#    define CPU_M68020_OR_M68030_ONLY
-#    define CPU_IS_020_OR_030 (1)
-#  endif
-#endif
-
-#if !defined(CONFIG_M68040) && !defined(CONFIG_M68060)
-#  define CPU_IS_040_OR_060 (0)
-#else
-#  define CPU_M68040_OR_M68060
-#  if defined(CONFIG_M68020) || defined(CONFIG_M68030)
-#    define CPU_IS_040_OR_060 (m68k_is040or060)
-#  else
-#    define CPU_M68040_OR_M68060_ONLY
-#    define CPU_IS_040_OR_060 (1)
-#  endif
-#endif
-
-#if !defined(CONFIG_COLDFIRE)
-#  define CPU_IS_COLDFIRE (0)
-#else
-#  define CPU_IS_COLDFIRE (1)
-#  define MMU_IS_COLDFIRE (1)
-#endif
-
-#define CPU_TYPE (m68k_cputype)
-
-#ifdef CONFIG_M68KFPU_EMU
-#  ifdef CONFIG_M68KFPU_EMU_ONLY
-#    define FPU_IS_EMU (1)
-#  else
-#    define FPU_IS_EMU (!m68k_fputype)
-#  endif
-#else
-#  define FPU_IS_EMU (0)
-#endif
-
-
-    /*
-     *  Miscellaneous
-     */
-
-#define NUM_MEMINFO	4
-
-#ifndef __ASSEMBLY__
-struct mem_info {
-	unsigned long addr;		/* physical address of memory chunk */
-	unsigned long size;		/* length of memory chunk (in bytes) */
-};
-
-extern int m68k_num_memory;		/* # of memory blocks found (and used) */
-extern int m68k_realnum_memory;		/* real # of memory blocks found */
-extern struct mem_info m68k_memory[NUM_MEMINFO];/* memory description */
-#endif
-
-#endif /* __KERNEL__ */
-
-#endif /* _M68K_SETUP_H */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/shm.h b/ANDROID_3.4.5/arch/m68k/include/asm/shm.h
deleted file mode 100644
index fa56ec84..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/shm.h
+++ /dev/null
@@ -1,31 +0,0 @@
-#ifndef _M68K_SHM_H
-#define _M68K_SHM_H
-
-
-/* format of page table entries that correspond to shared memory pages
-   currently out in swap space (see also mm/swap.c):
-   bits 0-1 (PAGE_PRESENT) is  = 0
-   bits 8..2 (SWP_TYPE) are = SHM_SWP_TYPE
-   bits 31..9 are used like this:
-   bits 15..9 (SHM_ID) the id of the shared memory segment
-   bits 30..16 (SHM_IDX) the index of the page within the shared memory segment
-                    (actually only bits 25..16 get used since SHMMAX is so low)
-   bit 31 (SHM_READ_ONLY) flag whether the page belongs to a read-only attach
-*/
-/* on the m68k both bits 0 and 1 must be zero */
-/* format on the sun3 is similar, but bits 30, 31 are set to zero and all
-   others are reduced by 2. --m */
-
-#ifndef CONFIG_SUN3
-#define SHM_ID_SHIFT	9
-#else
-#define SHM_ID_SHIFT	7
-#endif
-#define _SHM_ID_BITS	7
-#define SHM_ID_MASK	((1<<_SHM_ID_BITS)-1)
-
-#define SHM_IDX_SHIFT	(SHM_ID_SHIFT+_SHM_ID_BITS)
-#define _SHM_IDX_BITS	15
-#define SHM_IDX_MASK	((1<<_SHM_IDX_BITS)-1)
-
-#endif /* _M68K_SHM_H */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/shmbuf.h b/ANDROID_3.4.5/arch/m68k/include/asm/shmbuf.h
deleted file mode 100644
index f8928d62..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/shmbuf.h
+++ /dev/null
@@ -1,42 +0,0 @@
-#ifndef _M68K_SHMBUF_H
-#define _M68K_SHMBUF_H
-
-/*
- * The shmid64_ds structure for m68k architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 64-bit time_t to solve y2038 problem
- * - 2 miscellaneous 32-bit values
- */
-
-struct shmid64_ds {
-	struct ipc64_perm	shm_perm;	/* operation perms */
-	size_t			shm_segsz;	/* size of segment (bytes) */
-	__kernel_time_t		shm_atime;	/* last attach time */
-	unsigned long		__unused1;
-	__kernel_time_t		shm_dtime;	/* last detach time */
-	unsigned long		__unused2;
-	__kernel_time_t		shm_ctime;	/* last change time */
-	unsigned long		__unused3;
-	__kernel_pid_t		shm_cpid;	/* pid of creator */
-	__kernel_pid_t		shm_lpid;	/* pid of last operator */
-	unsigned long		shm_nattch;	/* no. of current attaches */
-	unsigned long		__unused4;
-	unsigned long		__unused5;
-};
-
-struct shminfo64 {
-	unsigned long	shmmax;
-	unsigned long	shmmin;
-	unsigned long	shmmni;
-	unsigned long	shmseg;
-	unsigned long	shmall;
-	unsigned long	__unused1;
-	unsigned long	__unused2;
-	unsigned long	__unused3;
-	unsigned long	__unused4;
-};
-
-#endif /* _M68K_SHMBUF_H */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/shmparam.h b/ANDROID_3.4.5/arch/m68k/include/asm/shmparam.h
deleted file mode 100644
index 558892a2..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/shmparam.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _M68K_SHMPARAM_H
-#define _M68K_SHMPARAM_H
-
-#define	SHMLBA PAGE_SIZE		 /* attach addr a multiple of this */
-
-#endif /* _M68K_SHMPARAM_H */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/sigcontext.h b/ANDROID_3.4.5/arch/m68k/include/asm/sigcontext.h
deleted file mode 100644
index 523db2a5..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/sigcontext.h
+++ /dev/null
@@ -1,24 +0,0 @@
-#ifndef _ASM_M68k_SIGCONTEXT_H
-#define _ASM_M68k_SIGCONTEXT_H
-
-struct sigcontext {
-	unsigned long  sc_mask;		/* old sigmask */
-	unsigned long  sc_usp;		/* old user stack pointer */
-	unsigned long  sc_d0;
-	unsigned long  sc_d1;
-	unsigned long  sc_a0;
-	unsigned long  sc_a1;
-#ifdef __uClinux__
-	unsigned long  sc_a5;
-#endif
-	unsigned short sc_sr;
-	unsigned long  sc_pc;
-	unsigned short sc_formatvec;
-#ifndef __uClinux__
-	unsigned long  sc_fpregs[2*3];  /* room for two fp registers */
-	unsigned long  sc_fpcntl[3];
-	unsigned char  sc_fpstate[216];
-#endif
-};
-
-#endif
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/siginfo.h b/ANDROID_3.4.5/arch/m68k/include/asm/siginfo.h
deleted file mode 100644
index 851d3d78..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/siginfo.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _M68K_SIGINFO_H
-#define _M68K_SIGINFO_H
-
-#include <asm-generic/siginfo.h>
-
-#endif
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/signal.h b/ANDROID_3.4.5/arch/m68k/include/asm/signal.h
deleted file mode 100644
index 60e88660..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/signal.h
+++ /dev/null
@@ -1,212 +0,0 @@
-#ifndef _M68K_SIGNAL_H
-#define _M68K_SIGNAL_H
-
-#include <linux/types.h>
-
-/* Avoid too many header ordering problems.  */
-struct siginfo;
-
-#ifdef __KERNEL__
-/* Most things should be clean enough to redefine this at will, if care
-   is taken to make libc match.  */
-
-#define _NSIG		64
-#define _NSIG_BPW	32
-#define _NSIG_WORDS	(_NSIG / _NSIG_BPW)
-
-typedef unsigned long old_sigset_t;		/* at least 32 bits */
-
-typedef struct {
-	unsigned long sig[_NSIG_WORDS];
-} sigset_t;
-
-#else
-/* Here we must cater to libcs that poke about in kernel headers.  */
-
-#define NSIG		32
-typedef unsigned long sigset_t;
-
-#endif /* __KERNEL__ */
-
-#define SIGHUP		 1
-#define SIGINT		 2
-#define SIGQUIT		 3
-#define SIGILL		 4
-#define SIGTRAP		 5
-#define SIGABRT		 6
-#define SIGIOT		 6
-#define SIGBUS		 7
-#define SIGFPE		 8
-#define SIGKILL		 9
-#define SIGUSR1		10
-#define SIGSEGV		11
-#define SIGUSR2		12
-#define SIGPIPE		13
-#define SIGALRM		14
-#define SIGTERM		15
-#define SIGSTKFLT	16
-#define SIGCHLD		17
-#define SIGCONT		18
-#define SIGSTOP		19
-#define SIGTSTP		20
-#define SIGTTIN		21
-#define SIGTTOU		22
-#define SIGURG		23
-#define SIGXCPU		24
-#define SIGXFSZ		25
-#define SIGVTALRM	26
-#define SIGPROF		27
-#define SIGWINCH	28
-#define SIGIO		29
-#define SIGPOLL		SIGIO
-/*
-#define SIGLOST		29
-*/
-#define SIGPWR		30
-#define SIGSYS		31
-#define	SIGUNUSED	31
-
-/* These should not be considered constants from userland.  */
-#define SIGRTMIN	32
-#define SIGRTMAX	_NSIG
-
-/*
- * SA_FLAGS values:
- *
- * SA_ONSTACK indicates that a registered stack_t will be used.
- * SA_RESTART flag to get restarting signals (which were the default long ago)
- * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
- * SA_RESETHAND clears the handler when the signal is delivered.
- * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
- * SA_NODEFER prevents the current signal from being masked in the handler.
- *
- * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
- * Unix names RESETHAND and NODEFER respectively.
- */
-#define SA_NOCLDSTOP	0x00000001
-#define SA_NOCLDWAIT	0x00000002
-#define SA_SIGINFO	0x00000004
-#define SA_ONSTACK	0x08000000
-#define SA_RESTART	0x10000000
-#define SA_NODEFER	0x40000000
-#define SA_RESETHAND	0x80000000
-
-#define SA_NOMASK	SA_NODEFER
-#define SA_ONESHOT	SA_RESETHAND
-
-/*
- * sigaltstack controls
- */
-#define SS_ONSTACK	1
-#define SS_DISABLE	2
-
-#define MINSIGSTKSZ	2048
-#define SIGSTKSZ	8192
-
-#include <asm-generic/signal-defs.h>
-
-#ifdef __KERNEL__
-struct old_sigaction {
-	__sighandler_t sa_handler;
-	old_sigset_t sa_mask;
-	unsigned long sa_flags;
-	__sigrestore_t sa_restorer;
-};
-
-struct sigaction {
-	__sighandler_t sa_handler;
-	unsigned long sa_flags;
-	__sigrestore_t sa_restorer;
-	sigset_t sa_mask;		/* mask last for extensibility */
-};
-
-struct k_sigaction {
-	struct sigaction sa;
-};
-#else
-/* Here we must cater to libcs that poke about in kernel headers.  */
-
-struct sigaction {
-	union {
-	  __sighandler_t _sa_handler;
-	  void (*_sa_sigaction)(int, struct siginfo *, void *);
-	} _u;
-	sigset_t sa_mask;
-	unsigned long sa_flags;
-	void (*sa_restorer)(void);
-};
-
-#define sa_handler	_u._sa_handler
-#define sa_sigaction	_u._sa_sigaction
-
-#endif /* __KERNEL__ */
-
-typedef struct sigaltstack {
-	void __user *ss_sp;
-	int ss_flags;
-	size_t ss_size;
-} stack_t;
-
-#ifdef __KERNEL__
-#include <asm/sigcontext.h>
-
-#ifndef CONFIG_CPU_HAS_NO_BITFIELDS
-#define __HAVE_ARCH_SIG_BITOPS
-
-static inline void sigaddset(sigset_t *set, int _sig)
-{
-	asm ("bfset %0{%1,#1}"
-		: "+od" (*set)
-		: "id" ((_sig - 1) ^ 31)
-		: "cc");
-}
-
-static inline void sigdelset(sigset_t *set, int _sig)
-{
-	asm ("bfclr %0{%1,#1}"
-		: "+od" (*set)
-		: "id" ((_sig - 1) ^ 31)
-		: "cc");
-}
-
-static inline int __const_sigismember(sigset_t *set, int _sig)
-{
-	unsigned long sig = _sig - 1;
-	return 1 & (set->sig[sig / _NSIG_BPW] >> (sig % _NSIG_BPW));
-}
-
-static inline int __gen_sigismember(sigset_t *set, int _sig)
-{
-	int ret;
-	asm ("bfextu %1{%2,#1},%0"
-		: "=d" (ret)
-		: "od" (*set), "id" ((_sig-1) ^ 31)
-		: "cc");
-	return ret;
-}
-
-#define sigismember(set,sig)			\
-	(__builtin_constant_p(sig) ?		\
-	 __const_sigismember(set,sig) :		\
-	 __gen_sigismember(set,sig))
-
-static inline int sigfindinword(unsigned long word)
-{
-	asm ("bfffo %1{#0,#0},%0"
-		: "=d" (word)
-		: "d" (word & -word)
-		: "cc");
-	return word ^ 31;
-}
-
-#endif /* !CONFIG_CPU_HAS_NO_BITFIELDS */
-
-#ifdef __uClinux__
-#define ptrace_signal_deliver(regs, cookie) do { } while (0)
-#else
-struct pt_regs;
-extern void ptrace_signal_deliver(struct pt_regs *regs, void *cookie);
-#endif /* __uClinux__ */
-
-#endif /* __KERNEL__ */
-#endif /* _M68K_SIGNAL_H */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/smp.h b/ANDROID_3.4.5/arch/m68k/include/asm/smp.h
deleted file mode 100644
index 9e9bd7e5..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/smp.h
+++ /dev/null
@@ -1 +0,0 @@
-/* nothing required here yet */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/socket.h b/ANDROID_3.4.5/arch/m68k/include/asm/socket.h
deleted file mode 100644
index d1be684e..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/socket.h
+++ /dev/null
@@ -1,72 +0,0 @@
-#ifndef _ASM_SOCKET_H
-#define _ASM_SOCKET_H
-
-#include <asm/sockios.h>
-
-/* For setsockopt(2) */
-#define SOL_SOCKET	1
-
-#define SO_DEBUG	1
-#define SO_REUSEADDR	2
-#define SO_TYPE		3
-#define SO_ERROR	4
-#define SO_DONTROUTE	5
-#define SO_BROADCAST	6
-#define SO_SNDBUF	7
-#define SO_RCVBUF	8
-#define SO_SNDBUFFORCE	32
-#define SO_RCVBUFFORCE	33
-#define SO_KEEPALIVE	9
-#define SO_OOBINLINE	10
-#define SO_NO_CHECK	11
-#define SO_PRIORITY	12
-#define SO_LINGER	13
-#define SO_BSDCOMPAT	14
-/* To add :#define SO_REUSEPORT 15 */
-#define SO_PASSCRED	16
-#define SO_PEERCRED	17
-#define SO_RCVLOWAT	18
-#define SO_SNDLOWAT	19
-#define SO_RCVTIMEO	20
-#define SO_SNDTIMEO	21
-
-/* Security levels - as per NRL IPv6 - don't actually do anything */
-#define SO_SECURITY_AUTHENTICATION		22
-#define SO_SECURITY_ENCRYPTION_TRANSPORT	23
-#define SO_SECURITY_ENCRYPTION_NETWORK		24
-
-#define SO_BINDTODEVICE	25
-
-/* Socket filtering */
-#define SO_ATTACH_FILTER        26
-#define SO_DETACH_FILTER        27
-
-#define SO_PEERNAME             28
-#define SO_TIMESTAMP		29
-#define SCM_TIMESTAMP		SO_TIMESTAMP
-
-#define SO_ACCEPTCONN		30
-
-#define SO_PEERSEC             31
-#define SO_PASSSEC		34
-#define SO_TIMESTAMPNS		35
-#define SCM_TIMESTAMPNS		SO_TIMESTAMPNS
-
-#define SO_MARK			36
-
-#define SO_TIMESTAMPING		37
-#define SCM_TIMESTAMPING	SO_TIMESTAMPING
-
-#define SO_PROTOCOL		38
-#define SO_DOMAIN		39
-
-#define SO_RXQ_OVFL             40
-
-#define SO_WIFI_STATUS		41
-#define SCM_WIFI_STATUS		SO_WIFI_STATUS
-#define SO_PEEK_OFF		42
-
-/* Instruct lower device to use last 4-bytes of skb data as FCS */
-#define SO_NOFCS		43
-
-#endif /* _ASM_SOCKET_H */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/sockios.h b/ANDROID_3.4.5/arch/m68k/include/asm/sockios.h
deleted file mode 100644
index c04a2394..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/sockios.h
+++ /dev/null
@@ -1,13 +0,0 @@
-#ifndef __ARCH_M68K_SOCKIOS__
-#define __ARCH_M68K_SOCKIOS__
-
-/* Socket-level I/O control calls. */
-#define FIOSETOWN	0x8901
-#define SIOCSPGRP	0x8902
-#define FIOGETOWN	0x8903
-#define SIOCGPGRP	0x8904
-#define SIOCATMARK	0x8905
-#define SIOCGSTAMP	0x8906		/* Get stamp (timeval) */
-#define SIOCGSTAMPNS	0x8907		/* Get stamp (timespec) */
-
-#endif /* __ARCH_M68K_SOCKIOS__ */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/spinlock.h b/ANDROID_3.4.5/arch/m68k/include/asm/spinlock.h
deleted file mode 100644
index 20f46e27..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/spinlock.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __M68K_SPINLOCK_H
-#define __M68K_SPINLOCK_H
-
-#error "m68k doesn't do SMP yet"
-
-#endif
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/stat.h b/ANDROID_3.4.5/arch/m68k/include/asm/stat.h
deleted file mode 100644
index dd38bc2e..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/stat.h
+++ /dev/null
@@ -1,77 +0,0 @@
-#ifndef _M68K_STAT_H
-#define _M68K_STAT_H
-
-struct __old_kernel_stat {
-	unsigned short st_dev;
-	unsigned short st_ino;
-	unsigned short st_mode;
-	unsigned short st_nlink;
-	unsigned short st_uid;
-	unsigned short st_gid;
-	unsigned short st_rdev;
-	unsigned long  st_size;
-	unsigned long  st_atime;
-	unsigned long  st_mtime;
-	unsigned long  st_ctime;
-};
-
-struct stat {
-	unsigned short st_dev;
-	unsigned short __pad1;
-	unsigned long  st_ino;
-	unsigned short st_mode;
-	unsigned short st_nlink;
-	unsigned short st_uid;
-	unsigned short st_gid;
-	unsigned short st_rdev;
-	unsigned short __pad2;
-	unsigned long  st_size;
-	unsigned long  st_blksize;
-	unsigned long  st_blocks;
-	unsigned long  st_atime;
-	unsigned long  __unused1;
-	unsigned long  st_mtime;
-	unsigned long  __unused2;
-	unsigned long  st_ctime;
-	unsigned long  __unused3;
-	unsigned long  __unused4;
-	unsigned long  __unused5;
-};
-
-/* This matches struct stat64 in glibc2.1, hence the absolutely
- * insane amounts of padding around dev_t's.
- */
-struct stat64 {
-	unsigned long long	st_dev;
-	unsigned char	__pad1[2];
-
-#define STAT64_HAS_BROKEN_ST_INO	1
-	unsigned long	__st_ino;
-
-	unsigned int	st_mode;
-	unsigned int	st_nlink;
-
-	unsigned long	st_uid;
-	unsigned long	st_gid;
-
-	unsigned long long	st_rdev;
-	unsigned char	__pad3[2];
-
-	long long	st_size;
-	unsigned long	st_blksize;
-
-	unsigned long long	st_blocks;	/* Number 512-byte blocks allocated. */
-
-	unsigned long	st_atime;
-	unsigned long	st_atime_nsec;
-
-	unsigned long	st_mtime;
-	unsigned long	st_mtime_nsec;
-
-	unsigned long	st_ctime;
-	unsigned long	st_ctime_nsec;
-
-	unsigned long long	st_ino;
-};
-
-#endif /* _M68K_STAT_H */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/statfs.h b/ANDROID_3.4.5/arch/m68k/include/asm/statfs.h
deleted file mode 100644
index 08d93f14..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/statfs.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _M68K_STATFS_H
-#define _M68K_STATFS_H
-
-#include <asm-generic/statfs.h>
-
-#endif /* _M68K_STATFS_H */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/string.h b/ANDROID_3.4.5/arch/m68k/include/asm/string.h
deleted file mode 100644
index 32198454..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/string.h
+++ /dev/null
@@ -1,119 +0,0 @@
-#ifndef _M68K_STRING_H_
-#define _M68K_STRING_H_
-
-#include <linux/types.h>
-#include <linux/compiler.h>
-
-static inline size_t __kernel_strlen(const char *s)
-{
-	const char *sc;
-
-	for (sc = s; *sc++; )
-		;
-	return sc - s - 1;
-}
-
-static inline char *__kernel_strcpy(char *dest, const char *src)
-{
-	char *xdest = dest;
-
-	asm volatile ("\n"
-		"1:	move.b	(%1)+,(%0)+\n"
-		"	jne	1b"
-		: "+a" (dest), "+a" (src)
-		: : "memory");
-	return xdest;
-}
-
-#ifndef __IN_STRING_C
-
-#define __HAVE_ARCH_STRLEN
-#define strlen(s)	(__builtin_constant_p(s) ?	\
-			 __builtin_strlen(s) :		\
-			 __kernel_strlen(s))
-
-#define __HAVE_ARCH_STRNLEN
-static inline size_t strnlen(const char *s, size_t count)
-{
-	const char *sc = s;
-
-	asm volatile ("\n"
-		"1:     subq.l  #1,%1\n"
-		"       jcs     2f\n"
-		"       tst.b   (%0)+\n"
-		"       jne     1b\n"
-		"       subq.l  #1,%0\n"
-		"2:"
-		: "+a" (sc), "+d" (count));
-	return sc - s;
-}
-
-#define __HAVE_ARCH_STRCPY
-#if __GNUC__ >= 4
-#define strcpy(d, s)	(__builtin_constant_p(s) &&	\
-			 __builtin_strlen(s) <= 32 ?	\
-			 __builtin_strcpy(d, s) :	\
-			 __kernel_strcpy(d, s))
-#else
-#define strcpy(d, s)	__kernel_strcpy(d, s)
-#endif
-
-#define __HAVE_ARCH_STRNCPY
-static inline char *strncpy(char *dest, const char *src, size_t n)
-{
-	char *xdest = dest;
-
-	asm volatile ("\n"
-		"	jra	2f\n"
-		"1:	move.b	(%1),(%0)+\n"
-		"	jeq	2f\n"
-		"	addq.l	#1,%1\n"
-		"2:	subq.l	#1,%2\n"
-		"	jcc	1b\n"
-		: "+a" (dest), "+a" (src), "+d" (n)
-		: : "memory");
-	return xdest;
-}
-
-#define __HAVE_ARCH_STRCAT
-#define strcat(d, s)	({			\
-	char *__d = (d);			\
-	strcpy(__d + strlen(__d), (s));		\
-})
-
-#ifndef CONFIG_COLDFIRE
-#define __HAVE_ARCH_STRCMP
-static inline int strcmp(const char *cs, const char *ct)
-{
-	char res;
-
-	asm ("\n"
-		"1:	move.b	(%0)+,%2\n"	/* get *cs */
-		"	cmp.b	(%1)+,%2\n"	/* compare a byte */
-		"	jne	2f\n"		/* not equal, break out */
-		"	tst.b	%2\n"		/* at end of cs? */
-		"	jne	1b\n"		/* no, keep going */
-		"	jra	3f\n"		/* strings are equal */
-		"2:	sub.b	-(%1),%2\n"	/* *cs - *ct */
-		"3:"
-		: "+a" (cs), "+a" (ct), "=d" (res));
-	return res;
-}
-#endif /* CONFIG_COLDFIRE */
-
-#define __HAVE_ARCH_MEMMOVE
-extern void *memmove(void *, const void *, __kernel_size_t);
-
-#define memcmp(d, s, n) __builtin_memcmp(d, s, n)
-
-#define __HAVE_ARCH_MEMSET
-extern void *memset(void *, int, __kernel_size_t);
-#define memset(d, c, n) __builtin_memset(d, c, n)
-
-#define __HAVE_ARCH_MEMCPY
-extern void *memcpy(void *, const void *, __kernel_size_t);
-#define memcpy(d, s, n) __builtin_memcpy(d, s, n)
-
-#endif
-
-#endif /* _M68K_STRING_H_ */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/sun3-head.h b/ANDROID_3.4.5/arch/m68k/include/asm/sun3-head.h
deleted file mode 100644
index 05af2f18..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/sun3-head.h
+++ /dev/null
@@ -1,10 +0,0 @@
-#ifndef __SUN3_HEAD_H
-#define __SUN3_HEAD_H
-
-#define KERNBASE        0xE000000  /* First address the kernel will eventually be */
-#define LOAD_ADDR       0x4000      /* prom jumps to us here unless this is elf /boot */
-#define FC_CONTROL  3
-#define FC_SUPERD    5
-#define FC_CPU      7
-
-#endif /* __SUN3_HEAD_H */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/sun3_pgalloc.h b/ANDROID_3.4.5/arch/m68k/include/asm/sun3_pgalloc.h
deleted file mode 100644
index 48d80d5a..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/sun3_pgalloc.h
+++ /dev/null
@@ -1,102 +0,0 @@
-/* sun3_pgalloc.h --
- * reorganization around 2.3.39, routines moved from sun3_pgtable.h
- *
- *
- * 02/27/2002 -- Modified to support "highpte" implementation in 2.5.5 (Sam)
- *
- * moved 1/26/2000 Sam Creasey
- */
-
-#ifndef _SUN3_PGALLOC_H
-#define _SUN3_PGALLOC_H
-
-#include <asm/tlb.h>
-
-/* FIXME - when we get this compiling */
-/* erm, now that it's compiling, what do we do with it? */
-#define _KERNPG_TABLE 0
-
-extern const char bad_pmd_string[];
-
-#define pmd_alloc_one(mm,address)       ({ BUG(); ((pmd_t *)2); })
-
-
-static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte)
-{
-        free_page((unsigned long) pte);
-}
-
-static inline void pte_free(struct mm_struct *mm, pgtable_t page)
-{
-	pgtable_page_dtor(page);
-        __free_page(page);
-}
-
-#define __pte_free_tlb(tlb,pte,addr)			\
-do {							\
-	pgtable_page_dtor(pte);				\
-	tlb_remove_page((tlb), pte);			\
-} while (0)
-
-static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm,
-					  unsigned long address)
-{
-	unsigned long page = __get_free_page(GFP_KERNEL|__GFP_REPEAT);
-
-	if (!page)
-		return NULL;
-
-	memset((void *)page, 0, PAGE_SIZE);
-	return (pte_t *) (page);
-}
-
-static inline pgtable_t pte_alloc_one(struct mm_struct *mm,
-					unsigned long address)
-{
-        struct page *page = alloc_pages(GFP_KERNEL|__GFP_REPEAT, 0);
-
-	if (page == NULL)
-		return NULL;
-
-	clear_highpage(page);
-	pgtable_page_ctor(page);
-	return page;
-
-}
-
-static inline void pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmd, pte_t *pte)
-{
-	pmd_val(*pmd) = __pa((unsigned long)pte);
-}
-
-static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd, pgtable_t page)
-{
-	pmd_val(*pmd) = __pa((unsigned long)page_address(page));
-}
-#define pmd_pgtable(pmd) pmd_page(pmd)
-
-/*
- * allocating and freeing a pmd is trivial: the 1-entry pmd is
- * inside the pgd, so has no extra memory associated with it.
- */
-#define pmd_free(mm, x)			do { } while (0)
-#define __pmd_free_tlb(tlb, x, addr)	do { } while (0)
-
-static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd)
-{
-        free_page((unsigned long) pgd);
-}
-
-static inline pgd_t * pgd_alloc(struct mm_struct *mm)
-{
-     pgd_t *new_pgd;
-
-     new_pgd = (pgd_t *)get_zeroed_page(GFP_KERNEL);
-     memcpy(new_pgd, swapper_pg_dir, PAGE_SIZE);
-     memset(new_pgd, 0, (PAGE_OFFSET >> PGDIR_SHIFT));
-     return new_pgd;
-}
-
-#define pgd_populate(mm, pmd, pte) BUG()
-
-#endif /* SUN3_PGALLOC_H */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/sun3_pgtable.h b/ANDROID_3.4.5/arch/m68k/include/asm/sun3_pgtable.h
deleted file mode 100644
index f55aa041..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/sun3_pgtable.h
+++ /dev/null
@@ -1,231 +0,0 @@
-#ifndef _SUN3_PGTABLE_H
-#define _SUN3_PGTABLE_H
-
-#include <asm/sun3mmu.h>
-
-#ifndef __ASSEMBLY__
-#include <asm/virtconvert.h>
-#include <linux/linkage.h>
-
-/*
- * This file contains all the things which change drastically for the sun3
- * pagetable stuff, to avoid making too much of a mess of the generic m68k
- * `pgtable.h'; this should only be included from the generic file. --m
- */
-
-/* For virtual address to physical address conversion */
-#define VTOP(addr)	__pa(addr)
-#define PTOV(addr)	__va(addr)
-
-
-#endif	/* !__ASSEMBLY__ */
-
-/* These need to be defined for compatibility although the sun3 doesn't use them */
-#define _PAGE_NOCACHE030 0x040
-#define _CACHEMASK040   (~0x060)
-#define _PAGE_NOCACHE_S 0x040
-
-/* Page protection values within PTE. */
-#define SUN3_PAGE_VALID     (0x80000000)
-#define SUN3_PAGE_WRITEABLE (0x40000000)
-#define SUN3_PAGE_SYSTEM    (0x20000000)
-#define SUN3_PAGE_NOCACHE   (0x10000000)
-#define SUN3_PAGE_ACCESSED  (0x02000000)
-#define SUN3_PAGE_MODIFIED  (0x01000000)
-
-
-/* Externally used page protection values. */
-#define _PAGE_PRESENT	(SUN3_PAGE_VALID)
-#define _PAGE_ACCESSED	(SUN3_PAGE_ACCESSED)
-
-#define PTE_FILE_MAX_BITS 28
-
-/* Compound page protection values. */
-//todo: work out which ones *should* have SUN3_PAGE_NOCACHE and fix...
-// is it just PAGE_KERNEL and PAGE_SHARED?
-#define PAGE_NONE	__pgprot(SUN3_PAGE_VALID \
-				 | SUN3_PAGE_ACCESSED \
-				 | SUN3_PAGE_NOCACHE)
-#define PAGE_SHARED	__pgprot(SUN3_PAGE_VALID \
-				 | SUN3_PAGE_WRITEABLE \
-				 | SUN3_PAGE_ACCESSED \
-				 | SUN3_PAGE_NOCACHE)
-#define PAGE_COPY	__pgprot(SUN3_PAGE_VALID \
-				 | SUN3_PAGE_ACCESSED \
-				 | SUN3_PAGE_NOCACHE)
-#define PAGE_READONLY	__pgprot(SUN3_PAGE_VALID \
-				 | SUN3_PAGE_ACCESSED \
-				 | SUN3_PAGE_NOCACHE)
-#define PAGE_KERNEL	__pgprot(SUN3_PAGE_VALID \
-				 | SUN3_PAGE_WRITEABLE \
-				 | SUN3_PAGE_SYSTEM \
-				 | SUN3_PAGE_NOCACHE \
-				 | SUN3_PAGE_ACCESSED \
-				 | SUN3_PAGE_MODIFIED)
-#define PAGE_INIT	__pgprot(SUN3_PAGE_VALID \
-				 | SUN3_PAGE_WRITEABLE \
-				 | SUN3_PAGE_SYSTEM \
-				 | SUN3_PAGE_NOCACHE)
-
-/*
- * Page protections for initialising protection_map. The sun3 has only two
- * protection settings, valid (implying read and execute) and writeable. These
- * are as close as we can get...
- */
-#define __P000	PAGE_NONE
-#define __P001	PAGE_READONLY
-#define __P010	PAGE_COPY
-#define __P011	PAGE_COPY
-#define __P100	PAGE_READONLY
-#define __P101	PAGE_READONLY
-#define __P110	PAGE_COPY
-#define __P111	PAGE_COPY
-
-#define __S000	PAGE_NONE
-#define __S001	PAGE_READONLY
-#define __S010	PAGE_SHARED
-#define __S011	PAGE_SHARED
-#define __S100	PAGE_READONLY
-#define __S101	PAGE_READONLY
-#define __S110	PAGE_SHARED
-#define __S111	PAGE_SHARED
-
-/* Use these fake page-protections on PMDs. */
-#define SUN3_PMD_VALID	(0x00000001)
-#define SUN3_PMD_MASK	(0x0000003F)
-#define SUN3_PMD_MAGIC	(0x0000002B)
-
-#ifndef __ASSEMBLY__
-
-/*
- * Conversion functions: convert a page and protection to a page entry,
- * and a page entry and page directory to the page they refer to.
- */
-#define mk_pte(page, pgprot) pfn_pte(page_to_pfn(page), (pgprot))
-
-static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
-{
-	pte_val(pte) = (pte_val(pte) & SUN3_PAGE_CHG_MASK) | pgprot_val(newprot);
-	return pte;
-}
-
-#define pmd_set(pmdp,ptep) do {} while (0)
-
-static inline void pgd_set(pgd_t *pgdp, pmd_t *pmdp)
-{
-	pgd_val(*pgdp) = virt_to_phys(pmdp);
-}
-
-#define __pte_page(pte) \
-((unsigned long) __va ((pte_val (pte) & SUN3_PAGE_PGNUM_MASK) << PAGE_SHIFT))
-#define __pmd_page(pmd) \
-((unsigned long) __va (pmd_val (pmd) & PAGE_MASK))
-
-static inline int pte_none (pte_t pte) { return !pte_val (pte); }
-static inline int pte_present (pte_t pte) { return pte_val (pte) & SUN3_PAGE_VALID; }
-static inline void pte_clear (struct mm_struct *mm, unsigned long addr, pte_t *ptep)
-{
-	pte_val (*ptep) = 0;
-}
-
-#define pte_pfn(pte)            (pte_val(pte) & SUN3_PAGE_PGNUM_MASK)
-#define pfn_pte(pfn, pgprot) \
-({ pte_t __pte; pte_val(__pte) = pfn | pgprot_val(pgprot); __pte; })
-
-#define pte_page(pte)		virt_to_page(__pte_page(pte))
-#define pmd_page(pmd)		virt_to_page(__pmd_page(pmd))
-
-
-static inline int pmd_none2 (pmd_t *pmd) { return !pmd_val (*pmd); }
-#define pmd_none(pmd) pmd_none2(&(pmd))
-//static inline int pmd_bad (pmd_t pmd) { return (pmd_val (pmd) & SUN3_PMD_MASK) != SUN3_PMD_MAGIC; }
-static inline int pmd_bad2 (pmd_t *pmd) { return 0; }
-#define pmd_bad(pmd) pmd_bad2(&(pmd))
-static inline int pmd_present2 (pmd_t *pmd) { return pmd_val (*pmd) & SUN3_PMD_VALID; }
-/* #define pmd_present(pmd) pmd_present2(&(pmd)) */
-#define pmd_present(pmd) (!pmd_none2(&(pmd)))
-static inline void pmd_clear (pmd_t *pmdp) { pmd_val (*pmdp) = 0; }
-
-static inline int pgd_none (pgd_t pgd) { return 0; }
-static inline int pgd_bad (pgd_t pgd) { return 0; }
-static inline int pgd_present (pgd_t pgd) { return 1; }
-static inline void pgd_clear (pgd_t *pgdp) {}
-
-
-#define pte_ERROR(e) \
-	printk("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e))
-#define pmd_ERROR(e) \
-	printk("%s:%d: bad pmd %08lx.\n", __FILE__, __LINE__, pmd_val(e))
-#define pgd_ERROR(e) \
-	printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e))
-
-
-/*
- * The following only work if pte_present() is true.
- * Undefined behaviour if not...
- * [we have the full set here even if they don't change from m68k]
- */
-static inline int pte_write(pte_t pte)		{ return pte_val(pte) & SUN3_PAGE_WRITEABLE; }
-static inline int pte_dirty(pte_t pte)		{ return pte_val(pte) & SUN3_PAGE_MODIFIED; }
-static inline int pte_young(pte_t pte)		{ return pte_val(pte) & SUN3_PAGE_ACCESSED; }
-static inline int pte_file(pte_t pte)		{ return pte_val(pte) & SUN3_PAGE_ACCESSED; }
-static inline int pte_special(pte_t pte)	{ return 0; }
-
-static inline pte_t pte_wrprotect(pte_t pte)	{ pte_val(pte) &= ~SUN3_PAGE_WRITEABLE; return pte; }
-static inline pte_t pte_mkclean(pte_t pte)	{ pte_val(pte) &= ~SUN3_PAGE_MODIFIED; return pte; }
-static inline pte_t pte_mkold(pte_t pte)	{ pte_val(pte) &= ~SUN3_PAGE_ACCESSED; return pte; }
-static inline pte_t pte_mkwrite(pte_t pte)	{ pte_val(pte) |= SUN3_PAGE_WRITEABLE; return pte; }
-static inline pte_t pte_mkdirty(pte_t pte)	{ pte_val(pte) |= SUN3_PAGE_MODIFIED; return pte; }
-static inline pte_t pte_mkyoung(pte_t pte)	{ pte_val(pte) |= SUN3_PAGE_ACCESSED; return pte; }
-static inline pte_t pte_mknocache(pte_t pte)	{ pte_val(pte) |= SUN3_PAGE_NOCACHE; return pte; }
-// use this version when caches work...
-//static inline pte_t pte_mkcache(pte_t pte)	{ pte_val(pte) &= SUN3_PAGE_NOCACHE; return pte; }
-// until then, use:
-static inline pte_t pte_mkcache(pte_t pte)	{ return pte; }
-static inline pte_t pte_mkspecial(pte_t pte)	{ return pte; }
-
-extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
-extern pgd_t kernel_pg_dir[PTRS_PER_PGD];
-
-/* Find an entry in a pagetable directory. */
-#define pgd_index(address)     ((address) >> PGDIR_SHIFT)
-
-#define pgd_offset(mm, address) \
-((mm)->pgd + pgd_index(address))
-
-/* Find an entry in a kernel pagetable directory. */
-#define pgd_offset_k(address) pgd_offset(&init_mm, address)
-
-/* Find an entry in the second-level pagetable. */
-static inline pmd_t *pmd_offset (pgd_t *pgd, unsigned long address)
-{
-	return (pmd_t *) pgd;
-}
-
-static inline unsigned long pte_to_pgoff(pte_t pte)
-{
-	return pte.pte & SUN3_PAGE_PGNUM_MASK;
-}
-
-static inline pte_t pgoff_to_pte(unsigned off)
-{
-	pte_t pte = { off + SUN3_PAGE_ACCESSED };
-	return pte;
-}
-
-
-/* Find an entry in the third-level pagetable. */
-#define pte_index(address) ((address >> PAGE_SHIFT) & (PTRS_PER_PTE-1))
-#define pte_offset_kernel(pmd, address) ((pte_t *) __pmd_page(*pmd) + pte_index(address))
-#define pte_offset_map(pmd, address) ((pte_t *)page_address(pmd_page(*pmd)) + pte_index(address))
-#define pte_unmap(pte) do { } while (0)
-
-/* Macros to (de)construct the fake PTEs representing swap pages. */
-#define __swp_type(x)		((x).val & 0x7F)
-#define __swp_offset(x)		(((x).val) >> 7)
-#define __swp_entry(type,offset) ((swp_entry_t) { ((type) | ((offset) << 7)) })
-#define __pte_to_swp_entry(pte)	((swp_entry_t) { pte_val(pte) })
-#define __swp_entry_to_pte(x)	((pte_t) { (x).val })
-
-#endif	/* !__ASSEMBLY__ */
-#endif	/* !_SUN3_PGTABLE_H */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/sun3ints.h b/ANDROID_3.4.5/arch/m68k/include/asm/sun3ints.h
deleted file mode 100644
index 309d6e6a..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/sun3ints.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * sun3ints.h -- Linux/Sun3 interrupt handling code definitions
- *
- * Erik Verbruggen (erik@bigmama.xtdnet.nl)
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file COPYING in the main directory of this archive for
- * more details.
- */
-
-#ifndef SUN3INTS_H
-#define SUN3INTS_H
-
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <asm/intersil.h>
-#include <asm/oplib.h>
-#include <asm/traps.h>
-#include <asm/irq.h>
-
-#define SUN3_INT_VECS 192
-
-void sun3_enable_irq(unsigned int irq);
-void sun3_disable_irq(unsigned int irq);
-extern void sun3_init_IRQ (void);
-extern void sun3_enable_interrupts (void);
-extern void sun3_disable_interrupts (void);
-extern volatile unsigned char* sun3_intreg;
-
-/* master list of VME vectors -- don't fuck with this */
-#define SUN3_VEC_FLOPPY		(IRQ_USER+0)
-#define SUN3_VEC_VMESCSI0	(IRQ_USER+0)
-#define SUN3_VEC_VMESCSI1	(IRQ_USER+1)
-#define SUN3_VEC_CG		(IRQ_USER+104)
-
-
-#endif /* SUN3INTS_H */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/sun3mmu.h b/ANDROID_3.4.5/arch/m68k/include/asm/sun3mmu.h
deleted file mode 100644
index d8f17a0d..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/sun3mmu.h
+++ /dev/null
@@ -1,171 +0,0 @@
-/*
- * Definitions for Sun3 custom MMU.
- */
-#ifndef __SUN3_MMU_H__
-#define __SUN3_MMU_H__
-
-#include <linux/types.h>
-#include <asm/movs.h>
-#include <asm/sun3-head.h>
-
-/* MMU characteristics. */
-#define SUN3_SEGMAPS_PER_CONTEXT	2048
-#define SUN3_PMEGS_NUM			256
-#define SUN3_CONTEXTS_NUM               8
-
-#define SUN3_PMEG_SIZE_BITS	 17
-#define SUN3_PMEG_SIZE		 (1 << SUN3_PMEG_SIZE_BITS)
-#define SUN3_PMEG_MASK		 (SUN3_PMEG_SIZE - 1)
-
-#define SUN3_PTE_SIZE_BITS       13
-#define SUN3_PTE_SIZE		 (1 << SUN3_PTE_SIZE_BITS)
-#define SUN3_PTE_MASK		 (SUN3_PTE_SIZE - 1)
-
-#define SUN3_CONTROL_MASK       (0x0FFFFFFC)
-#define SUN3_INVALID_PMEG	255
-#define SUN3_INVALID_CONTEXT 255
-
-#define AC_IDPROM     0x00000000    /* 34  ID PROM, R/O, byte, 32 bytes      */
-#define AC_PAGEMAP    0x10000000    /* 3   Pagemap R/W, long                 */
-#define AC_SEGMAP     0x20000000    /* 3   Segment map, byte                 */
-#define AC_CONTEXT    0x30000000    /* 34c current mmu-context               */
-#define AC_SENABLE    0x40000000    /* 34c system dvma/cache/reset enable reg*/
-#define AC_UDVMA_ENB  0x50000000    /* 34  Not used on Sun boards, byte      */
-#define AC_BUS_ERROR  0x60000000    /* 34  Cleared on read, byte.            */
-#define AC_SYNC_ERR   0x60000000    /*   c fault type                        */
-#define AC_SYNC_VA    0x60000004    /*   c fault virtual address             */
-#define AC_ASYNC_ERR  0x60000008    /*   c asynchronous fault type           */
-#define AC_ASYNC_VA   0x6000000c    /*   c async fault virtual address       */
-#define AC_LEDS       0x70000000    /* 34  Zero turns on LEDs, byte          */
-#define AC_CACHETAGS  0x80000000    /* 34c direct access to the VAC tags     */
-#define AC_CACHEDDATA 0x90000000    /* 3 c direct access to the VAC data     */
-#define AC_UDVMA_MAP  0xD0000000    /* 4   Not used on Sun boards, byte      */
-#define AC_VME_VECTOR 0xE0000000    /* 4   For non-Autovector VME, byte      */
-#define AC_BOOT_SCC   0xF0000000    /* 34  bypass to access Zilog 8530. byte.*/
-
-#define SUN3_PAGE_CHG_MASK (SUN3_PAGE_PGNUM_MASK \
-			    | SUN3_PAGE_ACCESSED | SUN3_PAGE_MODIFIED)
-
-/* Bus access type within PTE. */
-#define SUN3_PAGE_TYPE_MASK   (0x0c000000)
-#define SUN3_PAGE_TYPE_MEMORY (0x00000000)
-#define SUN3_PAGE_TYPE_IO     (0x04000000)
-#define SUN3_PAGE_TYPE_VME16  (0x08000000)
-#define SUN3_PAGE_TYPE_VME32  (0x0c000000)
-
-/* Mask for page number within PTE. */
-#define SUN3_PAGE_PGNUM_MASK (0x0007FFFF)
-
-/* Bits within bus-error register. */
-#define SUN3_BUSERR_WATCHDOG	(0x01)
-#define SUN3_BUSERR_unused	(0x02)
-#define SUN3_BUSERR_FPAENERR	(0x04)
-#define SUN3_BUSERR_FPABERR	(0x08)
-#define SUN3_BUSERR_VMEBERR	(0x10)
-#define SUN3_BUSERR_TIMEOUT	(0x20)
-#define SUN3_BUSERR_PROTERR	(0x40)
-#define SUN3_BUSERR_INVALID	(0x80)
-
-#ifndef __ASSEMBLY__
-
-/* Read bus error status register (implicitly clearing it). */
-static inline unsigned char sun3_get_buserr(void)
-{
-	unsigned char sfc, c;
-
-	GET_SFC (sfc);
-	SET_SFC (FC_CONTROL);
-	GET_CONTROL_BYTE (AC_BUS_ERROR, c);
-	SET_SFC (sfc);
-
-	return c;
-}
-
-/* Read segmap from hardware MMU. */
-static inline unsigned long sun3_get_segmap(unsigned long addr)
-{
-        register unsigned long entry;
-        unsigned char c, sfc;
-
-        GET_SFC (sfc);
-        SET_SFC (FC_CONTROL);
-        GET_CONTROL_BYTE (AC_SEGMAP | (addr & SUN3_CONTROL_MASK), c);
-        SET_SFC (sfc);
-        entry = c;
-
-        return entry;
-}
-
-/* Write segmap to hardware MMU. */
-static inline void sun3_put_segmap(unsigned long addr, unsigned long entry)
-{
-        unsigned char sfc;
-
-        GET_DFC (sfc);
-        SET_DFC (FC_CONTROL);
-        SET_CONTROL_BYTE (AC_SEGMAP | (addr & SUN3_CONTROL_MASK), entry);
-	SET_DFC (sfc);
-
-        return;
-}
-
-/* Read PTE from hardware MMU. */
-static inline unsigned long sun3_get_pte(unsigned long addr)
-{
-        register unsigned long entry;
-        unsigned char sfc;
-
-        GET_SFC (sfc);
-        SET_SFC (FC_CONTROL);
-        GET_CONTROL_WORD (AC_PAGEMAP | (addr & SUN3_CONTROL_MASK), entry);
-        SET_SFC (sfc);
-
-        return entry;
-}
-
-/* Write PTE to hardware MMU. */
-static inline void sun3_put_pte(unsigned long addr, unsigned long entry)
-{
-        unsigned char sfc;
-
-        GET_DFC (sfc);
-        SET_DFC (FC_CONTROL);
-        SET_CONTROL_WORD (AC_PAGEMAP | (addr & SUN3_CONTROL_MASK), entry);
-	SET_DFC (sfc);
-
-        return;
-}
-
-/* get current context */
-static inline unsigned char sun3_get_context(void)
-{
-	unsigned char sfc, c;
-
-	GET_SFC(sfc);
-	SET_SFC(FC_CONTROL);
-	GET_CONTROL_BYTE(AC_CONTEXT, c);
-	SET_SFC(sfc);
-
-	return c;
-}
-
-/* set alternate context */
-static inline void sun3_put_context(unsigned char c)
-{
-	unsigned char dfc;
-	GET_DFC(dfc);
-	SET_DFC(FC_CONTROL);
-	SET_CONTROL_BYTE(AC_CONTEXT, c);
-	SET_DFC(dfc);
-
-	return;
-}
-
-extern void __iomem *sun3_ioremap(unsigned long phys, unsigned long size,
-			  unsigned long type);
-
-extern int sun3_map_test(unsigned long addr, char *val);
-
-#endif	/* !__ASSEMBLY__ */
-
-#endif	/* !__SUN3_MMU_H__ */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/sun3x.h b/ANDROID_3.4.5/arch/m68k/include/asm/sun3x.h
deleted file mode 100644
index f5691a1e..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/sun3x.h
+++ /dev/null
@@ -1,27 +0,0 @@
-#ifndef SUN3X_H
-#define SUN3X_H
-
-/* hardware addresses */
-#define SUN3X_IOMMU       0x60000000
-#define SUN3X_ENAREG      0x61000000
-#define SUN3X_INTREG      0x61001400
-#define SUN3X_DIAGREG     0x61001800
-#define SUN3X_ZS1         0x62000000
-#define SUN3X_ZS2         0x62002000
-#define SUN3X_LANCE       0x65002000
-#define SUN3X_EEPROM      0x64000000
-#define SUN3X_IDPROM      0x640007d8
-#define SUN3X_VIDEO_BASE  0x50000000
-#define SUN3X_VIDEO_P4ID  0x50300000
-#define SUN3X_ESP_BASE	  0x66000000
-#define SUN3X_ESP_DMA	  0x66001000
-#define SUN3X_FDC         0x6e000000
-#define SUN3X_FDC_FCR     0x6e000400
-#define SUN3X_FDC_FVR     0x6e000800
-
-/* some NVRAM addresses */
-#define SUN3X_EEPROM_CONS	(SUN3X_EEPROM + 0x1f)
-#define SUN3X_EEPROM_PORTA	(SUN3X_EEPROM + 0x58)
-#define SUN3X_EEPROM_PORTB	(SUN3X_EEPROM + 0x60)
-
-#endif
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/sun3xflop.h b/ANDROID_3.4.5/arch/m68k/include/asm/sun3xflop.h
deleted file mode 100644
index 95231e2f..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/sun3xflop.h
+++ /dev/null
@@ -1,262 +0,0 @@
-/* sun3xflop.h: Sun3/80 specific parts of the floppy driver.
- *
- * Derived partially from asm-sparc/floppy.h, which is:
- *     Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
- *
- * Sun3x version 2/4/2000 Sam Creasey (sammy@sammy.net)
- */
-
-#ifndef __ASM_SUN3X_FLOPPY_H
-#define __ASM_SUN3X_FLOPPY_H
-
-#include <asm/page.h>
-#include <asm/pgtable.h>
-#include <asm/irq.h>
-#include <asm/sun3x.h>
-
-/* default interrupt vector */
-#define SUN3X_FDC_IRQ 0x40
-
-/* some constants */
-#define FCR_TC 0x1
-#define FCR_EJECT 0x2
-#define FCR_MTRON 0x4
-#define FCR_DSEL1 0x8
-#define FCR_DSEL0 0x10
-
-/* We don't need no stinkin' I/O port allocation crap. */
-#undef release_region
-#undef request_region
-#define release_region(X, Y)	do { } while(0)
-#define request_region(X, Y, Z)	(1)
-
-struct sun3xflop_private {
-	volatile unsigned char *status_r;
-	volatile unsigned char *data_r;
-	volatile unsigned char *fcr_r;
-	volatile unsigned char *fvr_r;
-	unsigned char fcr;
-} sun3x_fdc;
-
-/* Super paranoid... */
-#undef HAVE_DISABLE_HLT
-
-/* Routines unique to each controller type on a Sun. */
-static unsigned char sun3x_82072_fd_inb(int port)
-{
-	static int once = 0;
-//	udelay(5);
-	switch(port & 7) {
-	default:
-		printk("floppy: Asked to read unknown port %d\n", port);
-		panic("floppy: Port bolixed.");
-	case 4: /* FD_STATUS */
-		return (*sun3x_fdc.status_r) & ~STATUS_DMA;
-	case 5: /* FD_DATA */
-		return (*sun3x_fdc.data_r);
-	case 7: /* FD_DIR */
-		/* ugly hack, I can't find a way to actually detect the disk */
-		if(!once) {
-			once = 1;
-			return 0x80;
-		}
-		return 0;
-	};
-	panic("sun_82072_fd_inb: How did I get here?");
-}
-
-static void sun3x_82072_fd_outb(unsigned char value, int port)
-{
-//	udelay(5);
-	switch(port & 7) {
-	default:
-		printk("floppy: Asked to write to unknown port %d\n", port);
-		panic("floppy: Port bolixed.");
-	case 2: /* FD_DOR */
-		/* Oh geese, 82072 on the Sun has no DOR register,
-		 * so we make do with taunting the FCR.
-		 *
-		 * ASSUMPTIONS:  There will only ever be one floppy
-		 *               drive attached to a Sun controller
-		 *               and it will be at drive zero.
-		 */
-
-	{
-		unsigned char fcr = sun3x_fdc.fcr;
-
-		if(value & 0x10) {
-			fcr |= (FCR_DSEL0 | FCR_MTRON);
-		} else
-			fcr &= ~(FCR_DSEL0 | FCR_MTRON);
-
-
-		if(fcr != sun3x_fdc.fcr) {
-			*(sun3x_fdc.fcr_r) = fcr;
-			sun3x_fdc.fcr = fcr;
-		}
-	}
-		break;
-	case 5: /* FD_DATA */
-		*(sun3x_fdc.data_r) = value;
-		break;
-	case 7: /* FD_DCR */
-		*(sun3x_fdc.status_r) = value;
-		break;
-	case 4: /* FD_STATUS */
-		*(sun3x_fdc.status_r) = value;
-		break;
-	};
-	return;
-}
-
-
-asmlinkage irqreturn_t sun3xflop_hardint(int irq, void *dev_id)
-{
-	register unsigned char st;
-
-#undef TRACE_FLPY_INT
-#define NO_FLOPPY_ASSEMBLER
-
-#ifdef TRACE_FLPY_INT
-	static int calls=0;
-	static int bytes=0;
-	static int dma_wait=0;
-#endif
-	if(!doing_pdma) {
-		floppy_interrupt(irq, dev_id);
-		return IRQ_HANDLED;
-	}
-
-//	printk("doing pdma\n");// st %x\n", sun_fdc->status_82072);
-
-#ifdef TRACE_FLPY_INT
-	if(!calls)
-		bytes = virtual_dma_count;
-#endif
-
-	{
-		register int lcount;
-		register char *lptr;
-
-		for(lcount=virtual_dma_count, lptr=virtual_dma_addr;
-		    lcount; lcount--, lptr++) {
-/*			st=fd_inb(virtual_dma_port+4) & 0x80 ;  */
-			st = *(sun3x_fdc.status_r);
-/*			if(st != 0xa0)                  */
-/*				break;                  */
-
-			if((st & 0x80) == 0) {
-				virtual_dma_count = lcount;
-				virtual_dma_addr = lptr;
-				return IRQ_HANDLED;
-			}
-
-			if((st & 0x20) == 0)
-				break;
-
-			if(virtual_dma_mode)
-/*				fd_outb(*lptr, virtual_dma_port+5); */
-				*(sun3x_fdc.data_r) = *lptr;
-			else
-/*				*lptr = fd_inb(virtual_dma_port+5); */
-				*lptr = *(sun3x_fdc.data_r);
-		}
-
-		virtual_dma_count = lcount;
-		virtual_dma_addr = lptr;
-/*		st = fd_inb(virtual_dma_port+4);   */
-		st = *(sun3x_fdc.status_r);
-	}
-
-#ifdef TRACE_FLPY_INT
-	calls++;
-#endif
-//	printk("st=%02x\n", st);
-	if(st == 0x20)
-		return IRQ_HANDLED;
-	if(!(st & 0x20)) {
-		virtual_dma_residue += virtual_dma_count;
-		virtual_dma_count=0;
-		doing_pdma = 0;
-
-#ifdef TRACE_FLPY_INT
-		printk("count=%x, residue=%x calls=%d bytes=%x dma_wait=%d\n",
-		       virtual_dma_count, virtual_dma_residue, calls, bytes,
-		       dma_wait);
-		calls = 0;
-		dma_wait=0;
-#endif
-
-		floppy_interrupt(irq, dev_id);
-		return IRQ_HANDLED;
-	}
-
-
-#ifdef TRACE_FLPY_INT
-	if(!virtual_dma_count)
-		dma_wait++;
-#endif
-	return IRQ_HANDLED;
-}
-
-static int sun3xflop_request_irq(void)
-{
-	static int once = 0;
-	int error;
-
-	if(!once) {
-		once = 1;
-		error = request_irq(FLOPPY_IRQ, sun3xflop_hardint,
-				    IRQF_DISABLED, "floppy", NULL);
-		return ((error == 0) ? 0 : -1);
-	} else return 0;
-}
-
-static void __init floppy_set_flags(int *ints,int param, int param2);
-
-static int sun3xflop_init(void)
-{
-	if(FLOPPY_IRQ < 0x40)
-		FLOPPY_IRQ = SUN3X_FDC_IRQ;
-
-	sun3x_fdc.status_r = (volatile unsigned char *)SUN3X_FDC;
-	sun3x_fdc.data_r  = (volatile unsigned char *)(SUN3X_FDC+1);
-	sun3x_fdc.fcr_r = (volatile unsigned char *)SUN3X_FDC_FCR;
-	sun3x_fdc.fvr_r = (volatile unsigned char *)SUN3X_FDC_FVR;
-	sun3x_fdc.fcr = 0;
-
-	/* Last minute sanity check... */
-	if(*sun3x_fdc.status_r == 0xff) {
-		return -1;
-	}
-
-	*sun3x_fdc.fvr_r = FLOPPY_IRQ;
-
-	*sun3x_fdc.fcr_r = FCR_TC;
-	udelay(10);
-	*sun3x_fdc.fcr_r = 0;
-
-	/* Success... */
-	floppy_set_flags(NULL, 1, FD_BROKEN_DCL); // I don't know how to detect this.
-	allowed_drive_mask = 0x01;
-	return (int) SUN3X_FDC;
-}
-
-/* I'm not precisely sure this eject routine works */
-static int sun3x_eject(void)
-{
-	if(MACH_IS_SUN3X) {
-
-		sun3x_fdc.fcr |= (FCR_DSEL0 | FCR_EJECT);
-		*(sun3x_fdc.fcr_r) = sun3x_fdc.fcr;
-		udelay(10);
-		sun3x_fdc.fcr &= ~(FCR_DSEL0 | FCR_EJECT);
-		*(sun3x_fdc.fcr_r) = sun3x_fdc.fcr;
-	}
-
-	return 0;
-}
-
-#define fd_eject(drive) sun3x_eject()
-
-#endif /* !(__ASM_SUN3X_FLOPPY_H) */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/sun3xprom.h b/ANDROID_3.4.5/arch/m68k/include/asm/sun3xprom.h
deleted file mode 100644
index 6735efcf..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/sun3xprom.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/* Useful PROM locations */
-
-#ifndef SUN3X_PROM_H
-#define SUN3X_PROM_H
-
-extern void (*sun3x_putchar)(int);
-extern int (*sun3x_getchar)(void);
-extern int (*sun3x_mayget)(void);
-extern int (*sun3x_mayput)(int);
-
-void sun3x_reboot(void);
-void sun3x_abort(void);
-void sun3x_prom_init(void);
-unsigned long sun3x_prom_ptov(unsigned long pa, unsigned long size);
-
-/* interesting hardware locations */
-#define SUN3X_IOMMU       0x60000000
-#define SUN3X_ENAREG      0x61000000
-#define SUN3X_INTREG      0x61001400
-#define SUN3X_DIAGREG     0x61001800
-#define SUN3X_ZS1         0x62000000
-#define SUN3X_ZS2         0x62002000
-#define SUN3X_LANCE       0x65002000
-#define SUN3X_EEPROM      0x64000000
-#define SUN3X_IDPROM      0x640007d8
-#define SUN3X_VIDEO_BASE  0x50400000
-#define SUN3X_VIDEO_REGS  0x50300000
-
-/* vector table */
-#define SUN3X_PROM_BASE   0xfefe0000
-#define SUN3X_P_GETCHAR   (SUN3X_PROM_BASE + 20)
-#define SUN3X_P_PUTCHAR   (SUN3X_PROM_BASE + 24)
-#define SUN3X_P_MAYGET    (SUN3X_PROM_BASE + 28)
-#define SUN3X_P_MAYPUT    (SUN3X_PROM_BASE + 32)
-#define SUN3X_P_REBOOT    (SUN3X_PROM_BASE + 96)
-#define SUN3X_P_SETLEDS   (SUN3X_PROM_BASE + 144)
-#define SUN3X_P_ABORT     (SUN3X_PROM_BASE + 152)
-
-/* mapped area */
-#define SUN3X_MAP_START   0xfee00000
-#define SUN3X_MAP_END     0xff000000
-
-#endif
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/swab.h b/ANDROID_3.4.5/arch/m68k/include/asm/swab.h
deleted file mode 100644
index b7b37a40..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/swab.h
+++ /dev/null
@@ -1,27 +0,0 @@
-#ifndef _M68K_SWAB_H
-#define _M68K_SWAB_H
-
-#include <linux/types.h>
-#include <linux/compiler.h>
-
-#define __SWAB_64_THRU_32__
-
-#if defined (__mcfisaaplus__) || defined (__mcfisac__)
-static inline __attribute_const__ __u32 __arch_swab32(__u32 val)
-{
-	__asm__("byterev %0" : "=d" (val) : "0" (val));
-	return val;
-}
-
-#define __arch_swab32 __arch_swab32
-#elif !defined(__mcoldfire__)
-
-static inline __attribute_const__ __u32 __arch_swab32(__u32 val)
-{
-	__asm__("rolw #8,%0; swap %0; rolw #8,%0" : "=d" (val) : "0" (val));
-	return val;
-}
-#define __arch_swab32 __arch_swab32
-#endif
-
-#endif /* _M68K_SWAB_H */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/switch_to.h b/ANDROID_3.4.5/arch/m68k/include/asm/switch_to.h
deleted file mode 100644
index 16fd6b63..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/switch_to.h
+++ /dev/null
@@ -1,41 +0,0 @@
-#ifndef _M68K_SWITCH_TO_H
-#define _M68K_SWITCH_TO_H
-
-/*
- * switch_to(n) should switch tasks to task ptr, first checking that
- * ptr isn't the current task, in which case it does nothing.  This
- * also clears the TS-flag if the task we switched to has used the
- * math co-processor latest.
- */
-/*
- * switch_to() saves the extra registers, that are not saved
- * automatically by SAVE_SWITCH_STACK in resume(), ie. d0-d5 and
- * a0-a1. Some of these are used by schedule() and its predecessors
- * and so we might get see unexpected behaviors when a task returns
- * with unexpected register values.
- *
- * syscall stores these registers itself and none of them are used
- * by syscall after the function in the syscall has been called.
- *
- * Beware that resume now expects *next to be in d1 and the offset of
- * tss to be in a1. This saves a few instructions as we no longer have
- * to push them onto the stack and read them back right after.
- *
- * 02/17/96 - Jes Sorensen (jds@kom.auc.dk)
- *
- * Changed 96/09/19 by Andreas Schwab
- * pass prev in a0, next in a1
- */
-asmlinkage void resume(void);
-#define switch_to(prev,next,last) do { \
-  register void *_prev __asm__ ("a0") = (prev); \
-  register void *_next __asm__ ("a1") = (next); \
-  register void *_last __asm__ ("d1"); \
-  __asm__ __volatile__("jbsr resume" \
-		       : "=a" (_prev), "=a" (_next), "=d" (_last) \
-		       : "0" (_prev), "1" (_next) \
-		       : "d0", "d2", "d3", "d4", "d5"); \
-  (last) = _last; \
-} while (0)
-
-#endif /* _M68K_SWITCH_TO_H */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/termbits.h b/ANDROID_3.4.5/arch/m68k/include/asm/termbits.h
deleted file mode 100644
index aea1e37b..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/termbits.h
+++ /dev/null
@@ -1,201 +0,0 @@
-#ifndef __ARCH_M68K_TERMBITS_H__
-#define __ARCH_M68K_TERMBITS_H__
-
-#include <linux/posix_types.h>
-
-typedef unsigned char	cc_t;
-typedef unsigned int	speed_t;
-typedef unsigned int	tcflag_t;
-
-#define NCCS 19
-struct termios {
-	tcflag_t c_iflag;		/* input mode flags */
-	tcflag_t c_oflag;		/* output mode flags */
-	tcflag_t c_cflag;		/* control mode flags */
-	tcflag_t c_lflag;		/* local mode flags */
-	cc_t c_line;			/* line discipline */
-	cc_t c_cc[NCCS];		/* control characters */
-};
-
-struct termios2 {
-	tcflag_t c_iflag;		/* input mode flags */
-	tcflag_t c_oflag;		/* output mode flags */
-	tcflag_t c_cflag;		/* control mode flags */
-	tcflag_t c_lflag;		/* local mode flags */
-	cc_t c_line;			/* line discipline */
-	cc_t c_cc[NCCS];		/* control characters */
-	speed_t c_ispeed;		/* input speed */
-	speed_t c_ospeed;		/* output speed */
-};
-
-struct ktermios {
-	tcflag_t c_iflag;		/* input mode flags */
-	tcflag_t c_oflag;		/* output mode flags */
-	tcflag_t c_cflag;		/* control mode flags */
-	tcflag_t c_lflag;		/* local mode flags */
-	cc_t c_line;			/* line discipline */
-	cc_t c_cc[NCCS];		/* control characters */
-	speed_t c_ispeed;		/* input speed */
-	speed_t c_ospeed;		/* output speed */
-};
-
-/* c_cc characters */
-#define VINTR 0
-#define VQUIT 1
-#define VERASE 2
-#define VKILL 3
-#define VEOF 4
-#define VTIME 5
-#define VMIN 6
-#define VSWTC 7
-#define VSTART 8
-#define VSTOP 9
-#define VSUSP 10
-#define VEOL 11
-#define VREPRINT 12
-#define VDISCARD 13
-#define VWERASE 14
-#define VLNEXT 15
-#define VEOL2 16
-
-
-/* c_iflag bits */
-#define IGNBRK	0000001
-#define BRKINT	0000002
-#define IGNPAR	0000004
-#define PARMRK	0000010
-#define INPCK	0000020
-#define ISTRIP	0000040
-#define INLCR	0000100
-#define IGNCR	0000200
-#define ICRNL	0000400
-#define IUCLC	0001000
-#define IXON	0002000
-#define IXANY	0004000
-#define IXOFF	0010000
-#define IMAXBEL	0020000
-#define IUTF8	0040000
-
-/* c_oflag bits */
-#define OPOST	0000001
-#define OLCUC	0000002
-#define ONLCR	0000004
-#define OCRNL	0000010
-#define ONOCR	0000020
-#define ONLRET	0000040
-#define OFILL	0000100
-#define OFDEL	0000200
-#define NLDLY	0000400
-#define   NL0	0000000
-#define   NL1	0000400
-#define CRDLY	0003000
-#define   CR0	0000000
-#define   CR1	0001000
-#define   CR2	0002000
-#define   CR3	0003000
-#define TABDLY	0014000
-#define   TAB0	0000000
-#define   TAB1	0004000
-#define   TAB2	0010000
-#define   TAB3	0014000
-#define   XTABS	0014000
-#define BSDLY	0020000
-#define   BS0	0000000
-#define   BS1	0020000
-#define VTDLY	0040000
-#define   VT0	0000000
-#define   VT1	0040000
-#define FFDLY	0100000
-#define   FF0	0000000
-#define   FF1	0100000
-
-/* c_cflag bit meaning */
-#define CBAUD	0010017
-#define  B0	0000000		/* hang up */
-#define  B50	0000001
-#define  B75	0000002
-#define  B110	0000003
-#define  B134	0000004
-#define  B150	0000005
-#define  B200	0000006
-#define  B300	0000007
-#define  B600	0000010
-#define  B1200	0000011
-#define  B1800	0000012
-#define  B2400	0000013
-#define  B4800	0000014
-#define  B9600	0000015
-#define  B19200	0000016
-#define  B38400	0000017
-#define EXTA B19200
-#define EXTB B38400
-#define CSIZE	0000060
-#define   CS5	0000000
-#define   CS6	0000020
-#define   CS7	0000040
-#define   CS8	0000060
-#define CSTOPB	0000100
-#define CREAD	0000200
-#define PARENB	0000400
-#define PARODD	0001000
-#define HUPCL	0002000
-#define CLOCAL	0004000
-#define CBAUDEX 0010000
-#define    BOTHER 0010000
-#define    B57600 0010001
-#define   B115200 0010002
-#define   B230400 0010003
-#define   B460800 0010004
-#define   B500000 0010005
-#define   B576000 0010006
-#define   B921600 0010007
-#define  B1000000 0010010
-#define  B1152000 0010011
-#define  B1500000 0010012
-#define  B2000000 0010013
-#define  B2500000 0010014
-#define  B3000000 0010015
-#define  B3500000 0010016
-#define  B4000000 0010017
-#define CIBAUD	  002003600000		/* input baud rate */
-#define CMSPAR	  010000000000		/* mark or space (stick) parity */
-#define CRTSCTS	  020000000000		/* flow control */
-
-#define IBSHIFT	16			/* Shift from CBAUD to CIBAUD */
-
-/* c_lflag bits */
-#define ISIG	0000001
-#define ICANON	0000002
-#define XCASE	0000004
-#define ECHO	0000010
-#define ECHOE	0000020
-#define ECHOK	0000040
-#define ECHONL	0000100
-#define NOFLSH	0000200
-#define TOSTOP	0000400
-#define ECHOCTL	0001000
-#define ECHOPRT	0002000
-#define ECHOKE	0004000
-#define FLUSHO	0010000
-#define PENDIN	0040000
-#define IEXTEN	0100000
-#define EXTPROC	0200000
-
-
-/* tcflow() and TCXONC use these */
-#define	TCOOFF		0
-#define	TCOON		1
-#define	TCIOFF		2
-#define	TCION		3
-
-/* tcflush() and TCFLSH use these */
-#define	TCIFLUSH	0
-#define	TCOFLUSH	1
-#define	TCIOFLUSH	2
-
-/* tcsetattr uses these */
-#define	TCSANOW		0
-#define	TCSADRAIN	1
-#define	TCSAFLUSH	2
-
-#endif /* __ARCH_M68K_TERMBITS_H__ */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/termios.h b/ANDROID_3.4.5/arch/m68k/include/asm/termios.h
deleted file mode 100644
index 0823032e..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/termios.h
+++ /dev/null
@@ -1,92 +0,0 @@
-#ifndef _M68K_TERMIOS_H
-#define _M68K_TERMIOS_H
-
-#include <asm/termbits.h>
-#include <asm/ioctls.h>
-
-struct winsize {
-	unsigned short ws_row;
-	unsigned short ws_col;
-	unsigned short ws_xpixel;
-	unsigned short ws_ypixel;
-};
-
-#define NCC 8
-struct termio {
-	unsigned short c_iflag;		/* input mode flags */
-	unsigned short c_oflag;		/* output mode flags */
-	unsigned short c_cflag;		/* control mode flags */
-	unsigned short c_lflag;		/* local mode flags */
-	unsigned char c_line;		/* line discipline */
-	unsigned char c_cc[NCC];	/* control characters */
-};
-
-#ifdef __KERNEL__
-/*	intr=^C		quit=^|		erase=del	kill=^U
-	eof=^D		vtime=\0	vmin=\1		sxtc=\0
-	start=^Q	stop=^S		susp=^Z		eol=\0
-	reprint=^R	discard=^U	werase=^W	lnext=^V
-	eol2=\0
-*/
-#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0"
-#endif
-
-/* modem lines */
-#define TIOCM_LE	0x001
-#define TIOCM_DTR	0x002
-#define TIOCM_RTS	0x004
-#define TIOCM_ST	0x008
-#define TIOCM_SR	0x010
-#define TIOCM_CTS	0x020
-#define TIOCM_CAR	0x040
-#define TIOCM_RNG	0x080
-#define TIOCM_DSR	0x100
-#define TIOCM_CD	TIOCM_CAR
-#define TIOCM_RI	TIOCM_RNG
-#define TIOCM_OUT1	0x2000
-#define TIOCM_OUT2	0x4000
-#define TIOCM_LOOP	0x8000
-
-/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
-
-#ifdef __KERNEL__
-
-/*
- * Translate a "termio" structure into a "termios". Ugh.
- */
-#define user_termio_to_kernel_termios(termios, termio) \
-({ \
-	unsigned short tmp; \
-	get_user(tmp, &(termio)->c_iflag); \
-	(termios)->c_iflag = (0xffff0000 & ((termios)->c_iflag)) | tmp; \
-	get_user(tmp, &(termio)->c_oflag); \
-	(termios)->c_oflag = (0xffff0000 & ((termios)->c_oflag)) | tmp; \
-	get_user(tmp, &(termio)->c_cflag); \
-	(termios)->c_cflag = (0xffff0000 & ((termios)->c_cflag)) | tmp; \
-	get_user(tmp, &(termio)->c_lflag); \
-	(termios)->c_lflag = (0xffff0000 & ((termios)->c_lflag)) | tmp; \
-	get_user((termios)->c_line, &(termio)->c_line); \
-	copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \
-})
-
-/*
- * Translate a "termios" structure into a "termio". Ugh.
- */
-#define kernel_termios_to_user_termio(termio, termios) \
-({ \
-	put_user((termios)->c_iflag, &(termio)->c_iflag); \
-	put_user((termios)->c_oflag, &(termio)->c_oflag); \
-	put_user((termios)->c_cflag, &(termio)->c_cflag); \
-	put_user((termios)->c_lflag, &(termio)->c_lflag); \
-	put_user((termios)->c_line,  &(termio)->c_line); \
-	copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \
-})
-
-#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios2))
-#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios2))
-#define user_termios_to_kernel_termios_1(k, u) copy_from_user(k, u, sizeof(struct termios))
-#define kernel_termios_to_user_termios_1(u, k) copy_to_user(u, k, sizeof(struct termios))
-
-#endif	/* __KERNEL__ */
-
-#endif /* _M68K_TERMIOS_H */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/thread_info.h b/ANDROID_3.4.5/arch/m68k/include/asm/thread_info.h
deleted file mode 100644
index e8665e6f..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/thread_info.h
+++ /dev/null
@@ -1,81 +0,0 @@
-#ifndef _ASM_M68K_THREAD_INFO_H
-#define _ASM_M68K_THREAD_INFO_H
-
-#include <asm/types.h>
-#include <asm/page.h>
-#include <asm/segment.h>
-
-/*
- * On machines with 4k pages we default to an 8k thread size, though we
- * allow a 4k with config option. Any other machine page size then
- * the thread size must match the page size (which is 8k and larger here).
- */
-#if PAGE_SHIFT < 13
-#ifdef CONFIG_4KSTACKS
-#define THREAD_SIZE	4096
-#else
-#define THREAD_SIZE	8192
-#endif
-#else
-#define THREAD_SIZE	PAGE_SIZE
-#endif
-#define THREAD_SIZE_ORDER	((THREAD_SIZE / PAGE_SIZE) - 1)
-
-#ifndef __ASSEMBLY__
-
-struct thread_info {
-	struct task_struct	*task;		/* main task structure */
-	unsigned long		flags;
-	struct exec_domain	*exec_domain;	/* execution domain */
-	mm_segment_t		addr_limit;	/* thread address space */
-	int			preempt_count;	/* 0 => preemptable, <0 => BUG */
-	__u32			cpu;		/* should always be 0 on m68k */
-	unsigned long		tp_value;	/* thread pointer */
-	struct restart_block    restart_block;
-};
-#endif /* __ASSEMBLY__ */
-
-#define PREEMPT_ACTIVE		0x4000000
-
-#define INIT_THREAD_INFO(tsk)			\
-{						\
-	.task		= &tsk,			\
-	.exec_domain	= &default_exec_domain,	\
-	.addr_limit	= KERNEL_DS,		\
-	.preempt_count	= INIT_PREEMPT_COUNT,	\
-	.restart_block = {			\
-		.fn = do_no_restart_syscall,	\
-	},					\
-}
-
-#define init_stack		(init_thread_union.stack)
-
-#ifndef __ASSEMBLY__
-/* how to get the thread information struct from C */
-static inline struct thread_info *current_thread_info(void)
-{
-	struct thread_info *ti;
-	__asm__(
-		"move.l %%sp, %0 \n\t"
-		"and.l  %1, %0"
-		: "=&d"(ti)
-		: "di" (~(THREAD_SIZE-1))
-		);
-	return ti;
-}
-#endif
-
-#define init_thread_info	(init_thread_union.thread_info)
-
-/* entry.S relies on these definitions!
- * bits 0-7 are tested at every exception exit
- * bits 8-15 are also tested at syscall exit
- */
-#define TIF_SIGPENDING		6	/* signal pending */
-#define TIF_NEED_RESCHED	7	/* rescheduling necessary */
-#define TIF_DELAYED_TRACE	14	/* single step a syscall */
-#define TIF_SYSCALL_TRACE	15	/* syscall trace active */
-#define TIF_MEMDIE		16	/* is terminating due to OOM killer */
-#define TIF_RESTORE_SIGMASK	18	/* restore signal mask in do_signal */
-
-#endif	/* _ASM_M68K_THREAD_INFO_H */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/timex.h b/ANDROID_3.4.5/arch/m68k/include/asm/timex.h
deleted file mode 100644
index 6759dad9..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/timex.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- * linux/include/asm-m68k/timex.h
- *
- * m68k architecture timex specifications
- */
-#ifndef _ASMm68K_TIMEX_H
-#define _ASMm68K_TIMEX_H
-
-#ifdef CONFIG_COLDFIRE
-/*
- * CLOCK_TICK_RATE should give the underlying frequency of the tick timer
- * to make ntp work best.  For Coldfires, that's the main clock.
- */
-#include <asm/coldfire.h>
-#define CLOCK_TICK_RATE	MCF_CLK
-#else
-/*
- * This default CLOCK_TICK_RATE is probably wrong for many 68k boards
- * Users of those boards will need to check and modify accordingly
- */
-#define CLOCK_TICK_RATE	1193180 /* Underlying HZ */
-#endif
-
-typedef unsigned long cycles_t;
-
-static inline cycles_t get_cycles(void)
-{
-	return 0;
-}
-
-#endif
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/tlb.h b/ANDROID_3.4.5/arch/m68k/include/asm/tlb.h
deleted file mode 100644
index 1785cff7..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/tlb.h
+++ /dev/null
@@ -1,20 +0,0 @@
-#ifndef _M68K_TLB_H
-#define _M68K_TLB_H
-
-/*
- * m68k doesn't need any special per-pte or
- * per-vma handling..
- */
-#define tlb_start_vma(tlb, vma)	do { } while (0)
-#define tlb_end_vma(tlb, vma)	do { } while (0)
-#define __tlb_remove_tlb_entry(tlb, ptep, address)	do { } while (0)
-
-/*
- * .. because we flush the whole mm when it
- * fills up.
- */
-#define tlb_flush(tlb)		flush_tlb_mm((tlb)->mm)
-
-#include <asm-generic/tlb.h>
-
-#endif /* _M68K_TLB_H */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/tlbflush.h b/ANDROID_3.4.5/arch/m68k/include/asm/tlbflush.h
deleted file mode 100644
index 965ea35c..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/tlbflush.h
+++ /dev/null
@@ -1,278 +0,0 @@
-#ifndef _M68K_TLBFLUSH_H
-#define _M68K_TLBFLUSH_H
-
-#ifdef CONFIG_MMU
-#ifndef CONFIG_SUN3
-
-#include <asm/current.h>
-#include <asm/mcfmmu.h>
-
-static inline void flush_tlb_kernel_page(void *addr)
-{
-	if (CPU_IS_COLDFIRE) {
-		mmu_write(MMUOR, MMUOR_CNL);
-	} else if (CPU_IS_040_OR_060) {
-		mm_segment_t old_fs = get_fs();
-		set_fs(KERNEL_DS);
-		__asm__ __volatile__(".chip 68040\n\t"
-				     "pflush (%0)\n\t"
-				     ".chip 68k"
-				     : : "a" (addr));
-		set_fs(old_fs);
-	} else if (CPU_IS_020_OR_030)
-		__asm__ __volatile__("pflush #4,#4,(%0)" : : "a" (addr));
-}
-
-/*
- * flush all user-space atc entries.
- */
-static inline void __flush_tlb(void)
-{
-	if (CPU_IS_COLDFIRE) {
-		mmu_write(MMUOR, MMUOR_CNL);
-	} else if (CPU_IS_040_OR_060) {
-		__asm__ __volatile__(".chip 68040\n\t"
-				     "pflushan\n\t"
-				     ".chip 68k");
-	} else if (CPU_IS_020_OR_030) {
-		__asm__ __volatile__("pflush #0,#4");
-	}
-}
-
-static inline void __flush_tlb040_one(unsigned long addr)
-{
-	__asm__ __volatile__(".chip 68040\n\t"
-			     "pflush (%0)\n\t"
-			     ".chip 68k"
-			     : : "a" (addr));
-}
-
-static inline void __flush_tlb_one(unsigned long addr)
-{
-	if (CPU_IS_COLDFIRE)
-		mmu_write(MMUOR, MMUOR_CNL);
-	else if (CPU_IS_040_OR_060)
-		__flush_tlb040_one(addr);
-	else if (CPU_IS_020_OR_030)
-		__asm__ __volatile__("pflush #0,#4,(%0)" : : "a" (addr));
-}
-
-#define flush_tlb() __flush_tlb()
-
-/*
- * flush all atc entries (both kernel and user-space entries).
- */
-static inline void flush_tlb_all(void)
-{
-	if (CPU_IS_COLDFIRE) {
-		mmu_write(MMUOR, MMUOR_CNL);
-	} else if (CPU_IS_040_OR_060) {
-		__asm__ __volatile__(".chip 68040\n\t"
-				     "pflusha\n\t"
-				     ".chip 68k");
-	} else if (CPU_IS_020_OR_030) {
-		__asm__ __volatile__("pflusha");
-	}
-}
-
-static inline void flush_tlb_mm(struct mm_struct *mm)
-{
-	if (mm == current->active_mm)
-		__flush_tlb();
-}
-
-static inline void flush_tlb_page(struct vm_area_struct *vma, unsigned long addr)
-{
-	if (vma->vm_mm == current->active_mm) {
-		mm_segment_t old_fs = get_fs();
-		set_fs(USER_DS);
-		__flush_tlb_one(addr);
-		set_fs(old_fs);
-	}
-}
-
-static inline void flush_tlb_range(struct vm_area_struct *vma,
-				   unsigned long start, unsigned long end)
-{
-	if (vma->vm_mm == current->active_mm)
-		__flush_tlb();
-}
-
-static inline void flush_tlb_kernel_range(unsigned long start, unsigned long end)
-{
-	flush_tlb_all();
-}
-
-#else
-
-
-/* Reserved PMEGs. */
-extern char sun3_reserved_pmeg[SUN3_PMEGS_NUM];
-extern unsigned long pmeg_vaddr[SUN3_PMEGS_NUM];
-extern unsigned char pmeg_alloc[SUN3_PMEGS_NUM];
-extern unsigned char pmeg_ctx[SUN3_PMEGS_NUM];
-
-/* Flush all userspace mappings one by one...  (why no flush command,
-   sun?) */
-static inline void flush_tlb_all(void)
-{
-       unsigned long addr;
-       unsigned char ctx, oldctx;
-
-       oldctx = sun3_get_context();
-       for(addr = 0x00000000; addr < TASK_SIZE; addr += SUN3_PMEG_SIZE) {
-	       for(ctx = 0; ctx < 8; ctx++) {
-		       sun3_put_context(ctx);
-		       sun3_put_segmap(addr, SUN3_INVALID_PMEG);
-	       }
-       }
-
-       sun3_put_context(oldctx);
-       /* erase all of the userspace pmeg maps, we've clobbered them
-	  all anyway */
-       for(addr = 0; addr < SUN3_INVALID_PMEG; addr++) {
-	       if(pmeg_alloc[addr] == 1) {
-		       pmeg_alloc[addr] = 0;
-		       pmeg_ctx[addr] = 0;
-		       pmeg_vaddr[addr] = 0;
-	       }
-       }
-
-}
-
-/* Clear user TLB entries within the context named in mm */
-static inline void flush_tlb_mm (struct mm_struct *mm)
-{
-     unsigned char oldctx;
-     unsigned char seg;
-     unsigned long i;
-
-     oldctx = sun3_get_context();
-     sun3_put_context(mm->context);
-
-     for(i = 0; i < TASK_SIZE; i += SUN3_PMEG_SIZE) {
-	     seg = sun3_get_segmap(i);
-	     if(seg == SUN3_INVALID_PMEG)
-		     continue;
-
-	     sun3_put_segmap(i, SUN3_INVALID_PMEG);
-	     pmeg_alloc[seg] = 0;
-	     pmeg_ctx[seg] = 0;
-	     pmeg_vaddr[seg] = 0;
-     }
-
-     sun3_put_context(oldctx);
-
-}
-
-/* Flush a single TLB page. In this case, we're limited to flushing a
-   single PMEG */
-static inline void flush_tlb_page (struct vm_area_struct *vma,
-				   unsigned long addr)
-{
-	unsigned char oldctx;
-	unsigned char i;
-
-	oldctx = sun3_get_context();
-	sun3_put_context(vma->vm_mm->context);
-	addr &= ~SUN3_PMEG_MASK;
-	if((i = sun3_get_segmap(addr)) != SUN3_INVALID_PMEG)
-	{
-		pmeg_alloc[i] = 0;
-		pmeg_ctx[i] = 0;
-		pmeg_vaddr[i] = 0;
-		sun3_put_segmap (addr,  SUN3_INVALID_PMEG);
-	}
-	sun3_put_context(oldctx);
-
-}
-/* Flush a range of pages from TLB. */
-
-static inline void flush_tlb_range (struct vm_area_struct *vma,
-		      unsigned long start, unsigned long end)
-{
-	struct mm_struct *mm = vma->vm_mm;
-	unsigned char seg, oldctx;
-
-	start &= ~SUN3_PMEG_MASK;
-
-	oldctx = sun3_get_context();
-	sun3_put_context(mm->context);
-
-	while(start < end)
-	{
-		if((seg = sun3_get_segmap(start)) == SUN3_INVALID_PMEG)
-		     goto next;
-		if(pmeg_ctx[seg] == mm->context) {
-			pmeg_alloc[seg] = 0;
-			pmeg_ctx[seg] = 0;
-			pmeg_vaddr[seg] = 0;
-		}
-		sun3_put_segmap(start, SUN3_INVALID_PMEG);
-	next:
-		start += SUN3_PMEG_SIZE;
-	}
-}
-
-static inline void flush_tlb_kernel_range(unsigned long start, unsigned long end)
-{
-	flush_tlb_all();
-}
-
-/* Flush kernel page from TLB. */
-static inline void flush_tlb_kernel_page (unsigned long addr)
-{
-	sun3_put_segmap (addr & ~(SUN3_PMEG_SIZE - 1), SUN3_INVALID_PMEG);
-}
-
-#endif
-
-#else /* !CONFIG_MMU */
-
-/*
- * flush all user-space atc entries.
- */
-static inline void __flush_tlb(void)
-{
-	BUG();
-}
-
-static inline void __flush_tlb_one(unsigned long addr)
-{
-	BUG();
-}
-
-#define flush_tlb() __flush_tlb()
-
-/*
- * flush all atc entries (both kernel and user-space entries).
- */
-static inline void flush_tlb_all(void)
-{
-	BUG();
-}
-
-static inline void flush_tlb_mm(struct mm_struct *mm)
-{
-	BUG();
-}
-
-static inline void flush_tlb_page(struct vm_area_struct *vma, unsigned long addr)
-{
-	BUG();
-}
-
-static inline void flush_tlb_range(struct mm_struct *mm,
-				   unsigned long start, unsigned long end)
-{
-	BUG();
-}
-
-static inline void flush_tlb_kernel_page(unsigned long addr)
-{
-	BUG();
-}
-
-#endif /* CONFIG_MMU */
-
-#endif /* _M68K_TLBFLUSH_H */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/topology.h b/ANDROID_3.4.5/arch/m68k/include/asm/topology.h
deleted file mode 100644
index ca173e9f..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/topology.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _ASM_M68K_TOPOLOGY_H
-#define _ASM_M68K_TOPOLOGY_H
-
-#include <asm-generic/topology.h>
-
-#endif /* _ASM_M68K_TOPOLOGY_H */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/traps.h b/ANDROID_3.4.5/arch/m68k/include/asm/traps.h
deleted file mode 100644
index 4aff3358..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/traps.h
+++ /dev/null
@@ -1,272 +0,0 @@
-/*
- *  linux/include/asm/traps.h
- *
- *  Copyright (C) 1993        Hamish Macdonald
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file COPYING in the main directory of this archive
- * for more details.
- */
-
-#ifndef _M68K_TRAPS_H
-#define _M68K_TRAPS_H
-
-#ifndef __ASSEMBLY__
-
-#include <linux/linkage.h>
-#include <asm/ptrace.h>
-
-typedef void (*e_vector)(void);
-extern e_vector vectors[];
-extern e_vector *_ramvec;
-
-asmlinkage void auto_inthandler(void);
-asmlinkage void user_inthandler(void);
-asmlinkage void bad_inthandler(void);
-
-#endif
-
-#define VEC_RESETSP (0)
-#define VEC_RESETPC (1)
-#define VEC_BUSERR  (2)
-#define VEC_ADDRERR (3)
-#define VEC_ILLEGAL (4)
-#define VEC_ZERODIV (5)
-#define VEC_CHK     (6)
-#define VEC_TRAP    (7)
-#define VEC_PRIV    (8)
-#define VEC_TRACE   (9)
-#define VEC_LINE10  (10)
-#define VEC_LINE11  (11)
-#define VEC_RESV12  (12)
-#define VEC_COPROC  (13)
-#define VEC_FORMAT  (14)
-#define VEC_UNINT   (15)
-#define VEC_RESV16  (16)
-#define VEC_RESV17  (17)
-#define VEC_RESV18  (18)
-#define VEC_RESV19  (19)
-#define VEC_RESV20  (20)
-#define VEC_RESV21  (21)
-#define VEC_RESV22  (22)
-#define VEC_RESV23  (23)
-#define VEC_SPUR    (24)
-#define VEC_INT1    (25)
-#define VEC_INT2    (26)
-#define VEC_INT3    (27)
-#define VEC_INT4    (28)
-#define VEC_INT5    (29)
-#define VEC_INT6    (30)
-#define VEC_INT7    (31)
-#define VEC_SYS     (32)
-#define VEC_TRAP1   (33)
-#define VEC_TRAP2   (34)
-#define VEC_TRAP3   (35)
-#define VEC_TRAP4   (36)
-#define VEC_TRAP5   (37)
-#define VEC_TRAP6   (38)
-#define VEC_TRAP7   (39)
-#define VEC_TRAP8   (40)
-#define VEC_TRAP9   (41)
-#define VEC_TRAP10  (42)
-#define VEC_TRAP11  (43)
-#define VEC_TRAP12  (44)
-#define VEC_TRAP13  (45)
-#define VEC_TRAP14  (46)
-#define VEC_TRAP15  (47)
-#define VEC_FPBRUC  (48)
-#define VEC_FPIR    (49)
-#define VEC_FPDIVZ  (50)
-#define VEC_FPUNDER (51)
-#define VEC_FPOE    (52)
-#define VEC_FPOVER  (53)
-#define VEC_FPNAN   (54)
-#define VEC_FPUNSUP (55)
-#define VEC_MMUCFG  (56)
-#define VEC_MMUILL  (57)
-#define VEC_MMUACC  (58)
-#define VEC_RESV59  (59)
-#define	VEC_UNIMPEA (60)
-#define	VEC_UNIMPII (61)
-#define VEC_RESV62  (62)
-#define VEC_RESV63  (63)
-#define VEC_USER    (64)
-
-#define VECOFF(vec) ((vec)<<2)
-
-#ifndef __ASSEMBLY__
-
-/* Status register bits */
-#define PS_T  (0x8000)
-#define PS_S  (0x2000)
-#define PS_M  (0x1000)
-#define PS_C  (0x0001)
-
-/* bits for 68020/68030 special status word */
-
-#define FC    (0x8000)
-#define FB    (0x4000)
-#define RC    (0x2000)
-#define RB    (0x1000)
-#define DF    (0x0100)
-#define RM    (0x0080)
-#define RW    (0x0040)
-#define SZ    (0x0030)
-#define DFC   (0x0007)
-
-/* bits for 68030 MMU status register (mmusr,psr) */
-
-#define MMU_B	     (0x8000)    /* bus error */
-#define MMU_L	     (0x4000)    /* limit violation */
-#define MMU_S	     (0x2000)    /* supervisor violation */
-#define MMU_WP	     (0x0800)    /* write-protected */
-#define MMU_I	     (0x0400)    /* invalid descriptor */
-#define MMU_M	     (0x0200)    /* ATC entry modified */
-#define MMU_T	     (0x0040)    /* transparent translation */
-#define MMU_NUM      (0x0007)    /* number of levels traversed */
-
-
-/* bits for 68040 special status word */
-#define CP_040	(0x8000)
-#define CU_040	(0x4000)
-#define CT_040	(0x2000)
-#define CM_040	(0x1000)
-#define MA_040	(0x0800)
-#define ATC_040 (0x0400)
-#define LK_040	(0x0200)
-#define RW_040	(0x0100)
-#define SIZ_040 (0x0060)
-#define TT_040	(0x0018)
-#define TM_040	(0x0007)
-
-/* bits for 68040 write back status word */
-#define WBV_040   (0x80)
-#define WBSIZ_040 (0x60)
-#define WBBYT_040 (0x20)
-#define WBWRD_040 (0x40)
-#define WBLNG_040 (0x00)
-#define WBTT_040  (0x18)
-#define WBTM_040  (0x07)
-
-/* bus access size codes */
-#define BA_SIZE_BYTE    (0x20)
-#define BA_SIZE_WORD    (0x40)
-#define BA_SIZE_LONG    (0x00)
-#define BA_SIZE_LINE    (0x60)
-
-/* bus access transfer type codes */
-#define BA_TT_MOVE16    (0x08)
-
-/* bits for 68040 MMU status register (mmusr) */
-#define MMU_B_040   (0x0800)
-#define MMU_G_040   (0x0400)
-#define MMU_S_040   (0x0080)
-#define MMU_CM_040  (0x0060)
-#define MMU_M_040   (0x0010)
-#define MMU_WP_040  (0x0004)
-#define MMU_T_040   (0x0002)
-#define MMU_R_040   (0x0001)
-
-/* bits in the 68060 fault status long word (FSLW) */
-#define	MMU060_MA	(0x08000000)	/* misaligned */
-#define	MMU060_LK	(0x02000000)	/* locked transfer */
-#define	MMU060_RW	(0x01800000)	/* read/write */
-# define MMU060_RW_W	(0x00800000)	/* write */
-# define MMU060_RW_R	(0x01000000)	/* read */
-# define MMU060_RW_RMW	(0x01800000)	/* read/modify/write */
-# define MMU060_W	(0x00800000)	/* general write, includes rmw */
-#define	MMU060_SIZ	(0x00600000)	/* transfer size */
-#define	MMU060_TT	(0x00180000)	/* transfer type (TT) bits */
-#define	MMU060_TM	(0x00070000)	/* transfer modifier (TM) bits */
-#define	MMU060_IO	(0x00008000)	/* instruction or operand */
-#define	MMU060_PBE	(0x00004000)	/* push buffer bus error */
-#define	MMU060_SBE	(0x00002000)	/* store buffer bus error */
-#define	MMU060_PTA	(0x00001000)	/* pointer A fault */
-#define	MMU060_PTB	(0x00000800)	/* pointer B fault */
-#define	MMU060_IL	(0x00000400)	/* double indirect descr fault */
-#define	MMU060_PF	(0x00000200)	/* page fault (invalid descr) */
-#define	MMU060_SP	(0x00000100)	/* supervisor protection */
-#define	MMU060_WP	(0x00000080)	/* write protection */
-#define	MMU060_TWE	(0x00000040)	/* bus error on table search */
-#define	MMU060_RE	(0x00000020)	/* bus error on read */
-#define	MMU060_WE	(0x00000010)	/* bus error on write */
-#define	MMU060_TTR	(0x00000008)	/* error caused by TTR translation */
-#define	MMU060_BPE	(0x00000004)	/* branch prediction error */
-#define	MMU060_SEE	(0x00000001)	/* software emulated error */
-
-/* cases of missing or invalid descriptors */
-#define MMU060_DESC_ERR (MMU060_PTA | MMU060_PTB | \
-			 MMU060_IL  | MMU060_PF)
-/* bits that indicate real errors */
-#define MMU060_ERR_BITS (MMU060_PBE | MMU060_SBE | MMU060_DESC_ERR | MMU060_SP | \
-			 MMU060_WP  | MMU060_TWE | MMU060_RE       | MMU060_WE)
-
-/* structure for stack frames */
-
-struct frame {
-    struct pt_regs ptregs;
-    union {
-	    struct {
-		    unsigned long  iaddr;    /* instruction address */
-	    } fmt2;
-	    struct {
-		    unsigned long  effaddr;  /* effective address */
-	    } fmt3;
-	    struct {
-		    unsigned long  effaddr;  /* effective address */
-		    unsigned long  pc;	     /* pc of faulted instr */
-	    } fmt4;
-	    struct {
-		    unsigned long  effaddr;  /* effective address */
-		    unsigned short ssw;      /* special status word */
-		    unsigned short wb3s;     /* write back 3 status */
-		    unsigned short wb2s;     /* write back 2 status */
-		    unsigned short wb1s;     /* write back 1 status */
-		    unsigned long  faddr;    /* fault address */
-		    unsigned long  wb3a;     /* write back 3 address */
-		    unsigned long  wb3d;     /* write back 3 data */
-		    unsigned long  wb2a;     /* write back 2 address */
-		    unsigned long  wb2d;     /* write back 2 data */
-		    unsigned long  wb1a;     /* write back 1 address */
-		    unsigned long  wb1dpd0;  /* write back 1 data/push data 0*/
-		    unsigned long  pd1;      /* push data 1*/
-		    unsigned long  pd2;      /* push data 2*/
-		    unsigned long  pd3;      /* push data 3*/
-	    } fmt7;
-	    struct {
-		    unsigned long  iaddr;    /* instruction address */
-		    unsigned short int1[4];  /* internal registers */
-	    } fmt9;
-	    struct {
-		    unsigned short int1;
-		    unsigned short ssw;      /* special status word */
-		    unsigned short isc;      /* instruction stage c */
-		    unsigned short isb;      /* instruction stage b */
-		    unsigned long  daddr;    /* data cycle fault address */
-		    unsigned short int2[2];
-		    unsigned long  dobuf;    /* data cycle output buffer */
-		    unsigned short int3[2];
-	    } fmta;
-	    struct {
-		    unsigned short int1;
-		    unsigned short ssw;     /* special status word */
-		    unsigned short isc;     /* instruction stage c */
-		    unsigned short isb;     /* instruction stage b */
-		    unsigned long  daddr;   /* data cycle fault address */
-		    unsigned short int2[2];
-		    unsigned long  dobuf;   /* data cycle output buffer */
-		    unsigned short int3[4];
-		    unsigned long  baddr;   /* stage B address */
-		    unsigned short int4[2];
-		    unsigned long  dibuf;   /* data cycle input buffer */
-		    unsigned short int5[3];
-		    unsigned	   ver : 4; /* stack frame version # */
-		    unsigned	   int6:12;
-		    unsigned short int7[18];
-	    } fmtb;
-    } un;
-};
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* _M68K_TRAPS_H */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/types.h b/ANDROID_3.4.5/arch/m68k/include/asm/types.h
deleted file mode 100644
index 89705adc..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/types.h
+++ /dev/null
@@ -1,22 +0,0 @@
-#ifndef _M68K_TYPES_H
-#define _M68K_TYPES_H
-
-/*
- * This file is never included by application software unless
- * explicitly requested (e.g., via linux/types.h) in which case the
- * application is Linux specific so (user-) name space pollution is
- * not a major issue.  However, for interoperability, libraries still
- * need to be careful to avoid a name clashes.
- */
-#include <asm-generic/int-ll64.h>
-
-/*
- * These aren't exported outside the kernel to avoid name space clashes
- */
-#ifdef __KERNEL__
-
-#define BITS_PER_LONG 32
-
-#endif /* __KERNEL__ */
-
-#endif /* _M68K_TYPES_H */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/uaccess.h b/ANDROID_3.4.5/arch/m68k/include/asm/uaccess.h
deleted file mode 100644
index 38f92dbb..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/uaccess.h
+++ /dev/null
@@ -1,5 +0,0 @@
-#ifdef __uClinux__
-#include "uaccess_no.h"
-#else
-#include "uaccess_mm.h"
-#endif
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/uaccess_mm.h b/ANDROID_3.4.5/arch/m68k/include/asm/uaccess_mm.h
deleted file mode 100644
index 9c80cd51..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/uaccess_mm.h
+++ /dev/null
@@ -1,390 +0,0 @@
-#ifndef __M68K_UACCESS_H
-#define __M68K_UACCESS_H
-
-/*
- * User space memory access functions
- */
-#include <linux/compiler.h>
-#include <linux/errno.h>
-#include <linux/types.h>
-#include <linux/sched.h>
-#include <asm/segment.h>
-
-#define VERIFY_READ	0
-#define VERIFY_WRITE	1
-
-/* We let the MMU do all checking */
-static inline int access_ok(int type, const void __user *addr,
-			    unsigned long size)
-{
-	return 1;
-}
-
-/*
- * Not all varients of the 68k family support the notion of address spaces.
- * The traditional 680x0 parts do, and they use the sfc/dfc registers and
- * the "moves" instruction to access user space from kernel space. Other
- * family members like ColdFire don't support this, and only have a single
- * address space, and use the usual "move" instruction for user space access.
- *
- * Outside of this difference the user space access functions are the same.
- * So lets keep the code simple and just define in what we need to use.
- */
-#ifdef CONFIG_CPU_HAS_ADDRESS_SPACES
-#define	MOVES	"moves"
-#else
-#define	MOVES	"move"
-#endif
-
-/*
- * The exception table consists of pairs of addresses: the first is the
- * address of an instruction that is allowed to fault, and the second is
- * the address at which the program should continue.  No registers are
- * modified, so it is entirely up to the continuation code to figure out
- * what to do.
- *
- * All the routines below use bits of fixup code that are out of line
- * with the main instruction path.  This means when everything is well,
- * we don't even have to jump over them.  Further, they do not intrude
- * on our cache or tlb entries.
- */
-
-struct exception_table_entry
-{
-	unsigned long insn, fixup;
-};
-
-extern int __put_user_bad(void);
-extern int __get_user_bad(void);
-
-#define __put_user_asm(res, x, ptr, bwl, reg, err)	\
-asm volatile ("\n"					\
-	"1:	"MOVES"."#bwl"	%2,%1\n"		\
-	"2:\n"						\
-	"	.section .fixup,\"ax\"\n"		\
-	"	.even\n"				\
-	"10:	moveq.l	%3,%0\n"			\
-	"	jra 2b\n"				\
-	"	.previous\n"				\
-	"\n"						\
-	"	.section __ex_table,\"a\"\n"		\
-	"	.align	4\n"				\
-	"	.long	1b,10b\n"			\
-	"	.long	2b,10b\n"			\
-	"	.previous"				\
-	: "+d" (res), "=m" (*(ptr))			\
-	: #reg (x), "i" (err))
-
-/*
- * These are the main single-value transfer routines.  They automatically
- * use the right size if we just have the right pointer type.
- */
-
-#define __put_user(x, ptr)						\
-({									\
-	typeof(*(ptr)) __pu_val = (x);					\
-	int __pu_err = 0;						\
-	__chk_user_ptr(ptr);						\
-	switch (sizeof (*(ptr))) {					\
-	case 1:								\
-		__put_user_asm(__pu_err, __pu_val, ptr, b, d, -EFAULT);	\
-		break;							\
-	case 2:								\
-		__put_user_asm(__pu_err, __pu_val, ptr, w, d, -EFAULT);	\
-		break;							\
-	case 4:								\
-		__put_user_asm(__pu_err, __pu_val, ptr, l, r, -EFAULT);	\
-		break;							\
-	case 8:								\
- 	    {								\
- 		const void __user *__pu_ptr = (ptr);			\
-		asm volatile ("\n"					\
-			"1:	"MOVES".l	%2,(%1)+\n"		\
-			"2:	"MOVES".l	%R2,(%1)\n"		\
-			"3:\n"						\
-			"	.section .fixup,\"ax\"\n"		\
-			"	.even\n"				\
-			"10:	movel %3,%0\n"				\
-			"	jra 3b\n"				\
-			"	.previous\n"				\
-			"\n"						\
-			"	.section __ex_table,\"a\"\n"		\
-			"	.align 4\n"				\
-			"	.long 1b,10b\n"				\
-			"	.long 2b,10b\n"				\
-			"	.long 3b,10b\n"				\
-			"	.previous"				\
-			: "+d" (__pu_err), "+a" (__pu_ptr)		\
-			: "r" (__pu_val), "i" (-EFAULT)			\
-			: "memory");					\
-		break;							\
-	    }								\
-	default:							\
-		__pu_err = __put_user_bad();				\
-		break;							\
-	}								\
-	__pu_err;							\
-})
-#define put_user(x, ptr)	__put_user(x, ptr)
-
-
-#define __get_user_asm(res, x, ptr, type, bwl, reg, err) ({	\
-	type __gu_val;						\
-	asm volatile ("\n"					\
-		"1:	"MOVES"."#bwl"	%2,%1\n"		\
-		"2:\n"						\
-		"	.section .fixup,\"ax\"\n"		\
-		"	.even\n"				\
-		"10:	move.l	%3,%0\n"			\
-		"	sub.l	%1,%1\n"			\
-		"	jra	2b\n"				\
-		"	.previous\n"				\
-		"\n"						\
-		"	.section __ex_table,\"a\"\n"		\
-		"	.align	4\n"				\
-		"	.long	1b,10b\n"			\
-		"	.previous"				\
-		: "+d" (res), "=&" #reg (__gu_val)		\
-		: "m" (*(ptr)), "i" (err));			\
-	(x) = (typeof(*(ptr)))(unsigned long)__gu_val;		\
-})
-
-#define __get_user(x, ptr)						\
-({									\
-	int __gu_err = 0;						\
-	__chk_user_ptr(ptr);						\
-	switch (sizeof(*(ptr))) {					\
-	case 1:								\
-		__get_user_asm(__gu_err, x, ptr, u8, b, d, -EFAULT);	\
-		break;							\
-	case 2:								\
-		__get_user_asm(__gu_err, x, ptr, u16, w, d, -EFAULT);	\
-		break;							\
-	case 4:								\
-		__get_user_asm(__gu_err, x, ptr, u32, l, r, -EFAULT);	\
-		break;							\
-/*	case 8:	disabled because gcc-4.1 has a broken typeof		\
- 	    {								\
- 		const void *__gu_ptr = (ptr);				\
- 		u64 __gu_val;						\
-		asm volatile ("\n"					\
-			"1:	"MOVES".l	(%2)+,%1\n"		\
-			"2:	"MOVES".l	(%2),%R1\n"		\
-			"3:\n"						\
-			"	.section .fixup,\"ax\"\n"		\
-			"	.even\n"				\
-			"10:	move.l	%3,%0\n"			\
-			"	sub.l	%1,%1\n"			\
-			"	sub.l	%R1,%R1\n"			\
-			"	jra	3b\n"				\
-			"	.previous\n"				\
-			"\n"						\
-			"	.section __ex_table,\"a\"\n"		\
-			"	.align	4\n"				\
-			"	.long	1b,10b\n"			\
-			"	.long	2b,10b\n"			\
-			"	.previous"				\
-			: "+d" (__gu_err), "=&r" (__gu_val),		\
-			  "+a" (__gu_ptr)				\
-			: "i" (-EFAULT)					\
-			: "memory");					\
-		(x) = (typeof(*(ptr)))__gu_val;				\
-		break;							\
-	    }	*/							\
-	default:							\
-		__gu_err = __get_user_bad();				\
-		break;							\
-	}								\
-	__gu_err;							\
-})
-#define get_user(x, ptr) __get_user(x, ptr)
-
-unsigned long __generic_copy_from_user(void *to, const void __user *from, unsigned long n);
-unsigned long __generic_copy_to_user(void __user *to, const void *from, unsigned long n);
-
-#define __constant_copy_from_user_asm(res, to, from, tmp, n, s1, s2, s3)\
-	asm volatile ("\n"						\
-		"1:	"MOVES"."#s1"	(%2)+,%3\n"			\
-		"	move."#s1"	%3,(%1)+\n"			\
-		"2:	"MOVES"."#s2"	(%2)+,%3\n"			\
-		"	move."#s2"	%3,(%1)+\n"			\
-		"	.ifnc	\""#s3"\",\"\"\n"			\
-		"3:	"MOVES"."#s3"	(%2)+,%3\n"			\
-		"	move."#s3"	%3,(%1)+\n"			\
-		"	.endif\n"					\
-		"4:\n"							\
-		"	.section __ex_table,\"a\"\n"			\
-		"	.align	4\n"					\
-		"	.long	1b,10f\n"				\
-		"	.long	2b,20f\n"				\
-		"	.ifnc	\""#s3"\",\"\"\n"			\
-		"	.long	3b,30f\n"				\
-		"	.endif\n"					\
-		"	.previous\n"					\
-		"\n"							\
-		"	.section .fixup,\"ax\"\n"			\
-		"	.even\n"					\
-		"10:	clr."#s1"	(%1)+\n"			\
-		"20:	clr."#s2"	(%1)+\n"			\
-		"	.ifnc	\""#s3"\",\"\"\n"			\
-		"30:	clr."#s3"	(%1)+\n"			\
-		"	.endif\n"					\
-		"	moveq.l	#"#n",%0\n"				\
-		"	jra	4b\n"					\
-		"	.previous\n"					\
-		: "+d" (res), "+&a" (to), "+a" (from), "=&d" (tmp)	\
-		: : "memory")
-
-static __always_inline unsigned long
-__constant_copy_from_user(void *to, const void __user *from, unsigned long n)
-{
-	unsigned long res = 0, tmp;
-
-	switch (n) {
-	case 1:
-		__get_user_asm(res, *(u8 *)to, (u8 __user *)from, u8, b, d, 1);
-		break;
-	case 2:
-		__get_user_asm(res, *(u16 *)to, (u16 __user *)from, u16, w, d, 2);
-		break;
-	case 3:
-		__constant_copy_from_user_asm(res, to, from, tmp, 3, w, b,);
-		break;
-	case 4:
-		__get_user_asm(res, *(u32 *)to, (u32 __user *)from, u32, l, r, 4);
-		break;
-	case 5:
-		__constant_copy_from_user_asm(res, to, from, tmp, 5, l, b,);
-		break;
-	case 6:
-		__constant_copy_from_user_asm(res, to, from, tmp, 6, l, w,);
-		break;
-	case 7:
-		__constant_copy_from_user_asm(res, to, from, tmp, 7, l, w, b);
-		break;
-	case 8:
-		__constant_copy_from_user_asm(res, to, from, tmp, 8, l, l,);
-		break;
-	case 9:
-		__constant_copy_from_user_asm(res, to, from, tmp, 9, l, l, b);
-		break;
-	case 10:
-		__constant_copy_from_user_asm(res, to, from, tmp, 10, l, l, w);
-		break;
-	case 12:
-		__constant_copy_from_user_asm(res, to, from, tmp, 12, l, l, l);
-		break;
-	default:
-		/* we limit the inlined version to 3 moves */
-		return __generic_copy_from_user(to, from, n);
-	}
-
-	return res;
-}
-
-#define __constant_copy_to_user_asm(res, to, from, tmp, n, s1, s2, s3)	\
-	asm volatile ("\n"						\
-		"	move."#s1"	(%2)+,%3\n"			\
-		"11:	"MOVES"."#s1"	%3,(%1)+\n"			\
-		"12:	move."#s2"	(%2)+,%3\n"			\
-		"21:	"MOVES"."#s2"	%3,(%1)+\n"			\
-		"22:\n"							\
-		"	.ifnc	\""#s3"\",\"\"\n"			\
-		"	move."#s3"	(%2)+,%3\n"			\
-		"31:	"MOVES"."#s3"	%3,(%1)+\n"			\
-		"32:\n"							\
-		"	.endif\n"					\
-		"4:\n"							\
-		"\n"							\
-		"	.section __ex_table,\"a\"\n"			\
-		"	.align	4\n"					\
-		"	.long	11b,5f\n"				\
-		"	.long	12b,5f\n"				\
-		"	.long	21b,5f\n"				\
-		"	.long	22b,5f\n"				\
-		"	.ifnc	\""#s3"\",\"\"\n"			\
-		"	.long	31b,5f\n"				\
-		"	.long	32b,5f\n"				\
-		"	.endif\n"					\
-		"	.previous\n"					\
-		"\n"							\
-		"	.section .fixup,\"ax\"\n"			\
-		"	.even\n"					\
-		"5:	moveq.l	#"#n",%0\n"				\
-		"	jra	4b\n"					\
-		"	.previous\n"					\
-		: "+d" (res), "+a" (to), "+a" (from), "=&d" (tmp)	\
-		: : "memory")
-
-static __always_inline unsigned long
-__constant_copy_to_user(void __user *to, const void *from, unsigned long n)
-{
-	unsigned long res = 0, tmp;
-
-	switch (n) {
-	case 1:
-		__put_user_asm(res, *(u8 *)from, (u8 __user *)to, b, d, 1);
-		break;
-	case 2:
-		__put_user_asm(res, *(u16 *)from, (u16 __user *)to, w, d, 2);
-		break;
-	case 3:
-		__constant_copy_to_user_asm(res, to, from, tmp, 3, w, b,);
-		break;
-	case 4:
-		__put_user_asm(res, *(u32 *)from, (u32 __user *)to, l, r, 4);
-		break;
-	case 5:
-		__constant_copy_to_user_asm(res, to, from, tmp, 5, l, b,);
-		break;
-	case 6:
-		__constant_copy_to_user_asm(res, to, from, tmp, 6, l, w,);
-		break;
-	case 7:
-		__constant_copy_to_user_asm(res, to, from, tmp, 7, l, w, b);
-		break;
-	case 8:
-		__constant_copy_to_user_asm(res, to, from, tmp, 8, l, l,);
-		break;
-	case 9:
-		__constant_copy_to_user_asm(res, to, from, tmp, 9, l, l, b);
-		break;
-	case 10:
-		__constant_copy_to_user_asm(res, to, from, tmp, 10, l, l, w);
-		break;
-	case 12:
-		__constant_copy_to_user_asm(res, to, from, tmp, 12, l, l, l);
-		break;
-	default:
-		/* limit the inlined version to 3 moves */
-		return __generic_copy_to_user(to, from, n);
-	}
-
-	return res;
-}
-
-#define __copy_from_user(to, from, n)		\
-(__builtin_constant_p(n) ?			\
- __constant_copy_from_user(to, from, n) :	\
- __generic_copy_from_user(to, from, n))
-
-#define __copy_to_user(to, from, n)		\
-(__builtin_constant_p(n) ?			\
- __constant_copy_to_user(to, from, n) :		\
- __generic_copy_to_user(to, from, n))
-
-#define __copy_to_user_inatomic		__copy_to_user
-#define __copy_from_user_inatomic	__copy_from_user
-
-#define copy_from_user(to, from, n)	__copy_from_user(to, from, n)
-#define copy_to_user(to, from, n)	__copy_to_user(to, from, n)
-
-long strncpy_from_user(char *dst, const char __user *src, long count);
-long strnlen_user(const char __user *src, long n);
-unsigned long __clear_user(void __user *to, unsigned long n);
-
-#define clear_user	__clear_user
-
-#define strlen_user(str) strnlen_user(str, 32767)
-
-#endif /* _M68K_UACCESS_H */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/uaccess_no.h b/ANDROID_3.4.5/arch/m68k/include/asm/uaccess_no.h
deleted file mode 100644
index 68bbe9b3..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/uaccess_no.h
+++ /dev/null
@@ -1,181 +0,0 @@
-#ifndef __M68KNOMMU_UACCESS_H
-#define __M68KNOMMU_UACCESS_H
-
-/*
- * User space memory access functions
- */
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <linux/string.h>
-
-#include <asm/segment.h>
-
-#define VERIFY_READ	0
-#define VERIFY_WRITE	1
-
-#define access_ok(type,addr,size)	_access_ok((unsigned long)(addr),(size))
-
-/*
- * It is not enough to just have access_ok check for a real RAM address.
- * This would disallow the case of code/ro-data running XIP in flash/rom.
- * Ideally we would check the possible flash ranges too, but that is
- * currently not so easy.
- */
-static inline int _access_ok(unsigned long addr, unsigned long size)
-{
-	return 1;
-}
-
-/*
- * The exception table consists of pairs of addresses: the first is the
- * address of an instruction that is allowed to fault, and the second is
- * the address at which the program should continue.  No registers are
- * modified, so it is entirely up to the continuation code to figure out
- * what to do.
- *
- * All the routines below use bits of fixup code that are out of line
- * with the main instruction path.  This means when everything is well,
- * we don't even have to jump over them.  Further, they do not intrude
- * on our cache or tlb entries.
- */
-
-struct exception_table_entry
-{
-	unsigned long insn, fixup;
-};
-
-/* Returns 0 if exception not found and fixup otherwise.  */
-extern unsigned long search_exception_table(unsigned long);
-
-
-/*
- * These are the main single-value transfer routines.  They automatically
- * use the right size if we just have the right pointer type.
- */
-
-#define put_user(x, ptr)				\
-({							\
-    int __pu_err = 0;					\
-    typeof(*(ptr)) __pu_val = (x);			\
-    switch (sizeof (*(ptr))) {				\
-    case 1:						\
-	__put_user_asm(__pu_err, __pu_val, ptr, b);	\
-	break;						\
-    case 2:						\
-	__put_user_asm(__pu_err, __pu_val, ptr, w);	\
-	break;						\
-    case 4:						\
-	__put_user_asm(__pu_err, __pu_val, ptr, l);	\
-	break;						\
-    case 8:						\
-	memcpy(ptr, &__pu_val, sizeof (*(ptr))); \
-	break;						\
-    default:						\
-	__pu_err = __put_user_bad();			\
-	break;						\
-    }							\
-    __pu_err;						\
-})
-#define __put_user(x, ptr) put_user(x, ptr)
-
-extern int __put_user_bad(void);
-
-/*
- * Tell gcc we read from memory instead of writing: this is because
- * we do not write to any memory gcc knows about, so there are no
- * aliasing issues.
- */
-
-#define __ptr(x) ((unsigned long *)(x))
-
-#define __put_user_asm(err,x,ptr,bwl)				\
-	__asm__ ("move" #bwl " %0,%1"				\
-		: /* no outputs */						\
-		:"d" (x),"m" (*__ptr(ptr)) : "memory")
-
-#define get_user(x, ptr)					\
-({								\
-    int __gu_err = 0;						\
-    typeof(x) __gu_val = 0;					\
-    switch (sizeof(*(ptr))) {					\
-    case 1:							\
-	__get_user_asm(__gu_err, __gu_val, ptr, b, "=d");	\
-	break;							\
-    case 2:							\
-	__get_user_asm(__gu_err, __gu_val, ptr, w, "=r");	\
-	break;							\
-    case 4:							\
-	__get_user_asm(__gu_err, __gu_val, ptr, l, "=r");	\
-	break;							\
-    case 8:							\
-	memcpy((void *) &__gu_val, ptr, sizeof (*(ptr)));	\
-	break;							\
-    default:							\
-	__gu_val = 0;						\
-	__gu_err = __get_user_bad();				\
-	break;							\
-    }								\
-    (x) = (typeof(*(ptr))) __gu_val;				\
-    __gu_err;							\
-})
-#define __get_user(x, ptr) get_user(x, ptr)
-
-extern int __get_user_bad(void);
-
-#define __get_user_asm(err,x,ptr,bwl,reg)			\
-	__asm__ ("move" #bwl " %1,%0"				\
-		 : "=d" (x)					\
-		 : "m" (*__ptr(ptr)))
-
-#define copy_from_user(to, from, n)		(memcpy(to, from, n), 0)
-#define copy_to_user(to, from, n)		(memcpy(to, from, n), 0)
-
-#define __copy_from_user(to, from, n) copy_from_user(to, from, n)
-#define __copy_to_user(to, from, n) copy_to_user(to, from, n)
-#define __copy_to_user_inatomic __copy_to_user
-#define __copy_from_user_inatomic __copy_from_user
-
-#define copy_to_user_ret(to,from,n,retval) ({ if (copy_to_user(to,from,n)) return retval; })
-
-#define copy_from_user_ret(to,from,n,retval) ({ if (copy_from_user(to,from,n)) return retval; })
-
-/*
- * Copy a null terminated string from userspace.
- */
-
-static inline long
-strncpy_from_user(char *dst, const char *src, long count)
-{
-	char *tmp;
-	strncpy(dst, src, count);
-	for (tmp = dst; *tmp && count > 0; tmp++, count--)
-		;
-	return(tmp - dst); /* DAVIDM should we count a NUL ?  check getname */
-}
-
-/*
- * Return the size of a string (including the ending 0)
- *
- * Return 0 on exception, a value greater than N if too long
- */
-static inline long strnlen_user(const char *src, long n)
-{
-	return(strlen(src) + 1); /* DAVIDM make safer */
-}
-
-#define strlen_user(str) strnlen_user(str, 32767)
-
-/*
- * Zero Userspace
- */
-
-static inline unsigned long
-__clear_user(void *to, unsigned long n)
-{
-	memset(to, 0, n);
-	return 0;
-}
-
-#define	clear_user(to,n)	__clear_user(to,n)
-
-#endif /* _M68KNOMMU_UACCESS_H */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/ucontext.h b/ANDROID_3.4.5/arch/m68k/include/asm/ucontext.h
deleted file mode 100644
index e4e22669..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/ucontext.h
+++ /dev/null
@@ -1,30 +0,0 @@
-#ifndef _M68K_UCONTEXT_H
-#define _M68K_UCONTEXT_H
-
-typedef int greg_t;
-#define NGREG 18
-typedef greg_t gregset_t[NGREG];
-
-typedef struct fpregset {
-	int f_fpcntl[3];
-	int f_fpregs[8*3];
-} fpregset_t;
-
-struct mcontext {
-	int version;
-	gregset_t gregs;
-	fpregset_t fpregs;
-};
-
-#define MCONTEXT_VERSION 2
-
-struct ucontext {
-	unsigned long	  uc_flags;
-	struct ucontext  *uc_link;
-	stack_t		  uc_stack;
-	struct mcontext	  uc_mcontext;
-	unsigned long	  uc_filler[80];
-	sigset_t	  uc_sigmask;	/* mask last for extensibility */
-};
-
-#endif
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/unaligned.h b/ANDROID_3.4.5/arch/m68k/include/asm/unaligned.h
deleted file mode 100644
index 019caa74..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/unaligned.h
+++ /dev/null
@@ -1,25 +0,0 @@
-#ifndef _ASM_M68K_UNALIGNED_H
-#define _ASM_M68K_UNALIGNED_H
-
-
-#ifdef CONFIG_COLDFIRE
-#include <linux/unaligned/be_struct.h>
-#include <linux/unaligned/le_byteshift.h>
-#include <linux/unaligned/generic.h>
-
-#define get_unaligned	__get_unaligned_be
-#define put_unaligned	__put_unaligned_be
-
-#else
-/*
- * The m68k can do unaligned accesses itself. 
- */
-#include <linux/unaligned/access_ok.h>
-#include <linux/unaligned/generic.h>
-
-#define get_unaligned	__get_unaligned_be
-#define put_unaligned	__put_unaligned_be
-
-#endif
-
-#endif /* _ASM_M68K_UNALIGNED_H */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/unistd.h b/ANDROID_3.4.5/arch/m68k/include/asm/unistd.h
deleted file mode 100644
index ea0b502f..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/unistd.h
+++ /dev/null
@@ -1,396 +0,0 @@
-#ifndef _ASM_M68K_UNISTD_H_
-#define _ASM_M68K_UNISTD_H_
-
-/*
- * This file contains the system call numbers.
- */
-
-#define __NR_restart_syscall	  0
-#define __NR_exit		  1
-#define __NR_fork		  2
-#define __NR_read		  3
-#define __NR_write		  4
-#define __NR_open		  5
-#define __NR_close		  6
-#define __NR_waitpid		  7
-#define __NR_creat		  8
-#define __NR_link		  9
-#define __NR_unlink		 10
-#define __NR_execve		 11
-#define __NR_chdir		 12
-#define __NR_time		 13
-#define __NR_mknod		 14
-#define __NR_chmod		 15
-#define __NR_chown		 16
-/*#define __NR_break		 17*/
-#define __NR_oldstat		 18
-#define __NR_lseek		 19
-#define __NR_getpid		 20
-#define __NR_mount		 21
-#define __NR_umount		 22
-#define __NR_setuid		 23
-#define __NR_getuid		 24
-#define __NR_stime		 25
-#define __NR_ptrace		 26
-#define __NR_alarm		 27
-#define __NR_oldfstat		 28
-#define __NR_pause		 29
-#define __NR_utime		 30
-/*#define __NR_stty		 31*/
-/*#define __NR_gtty		 32*/
-#define __NR_access		 33
-#define __NR_nice		 34
-/*#define __NR_ftime		 35*/
-#define __NR_sync		 36
-#define __NR_kill		 37
-#define __NR_rename		 38
-#define __NR_mkdir		 39
-#define __NR_rmdir		 40
-#define __NR_dup		 41
-#define __NR_pipe		 42
-#define __NR_times		 43
-/*#define __NR_prof		 44*/
-#define __NR_brk		 45
-#define __NR_setgid		 46
-#define __NR_getgid		 47
-#define __NR_signal		 48
-#define __NR_geteuid		 49
-#define __NR_getegid		 50
-#define __NR_acct		 51
-#define __NR_umount2		 52
-/*#define __NR_lock		 53*/
-#define __NR_ioctl		 54
-#define __NR_fcntl		 55
-/*#define __NR_mpx		 56*/
-#define __NR_setpgid		 57
-/*#define __NR_ulimit		 58*/
-/*#define __NR_oldolduname	 59*/
-#define __NR_umask		 60
-#define __NR_chroot		 61
-#define __NR_ustat		 62
-#define __NR_dup2		 63
-#define __NR_getppid		 64
-#define __NR_getpgrp		 65
-#define __NR_setsid		 66
-#define __NR_sigaction		 67
-#define __NR_sgetmask		 68
-#define __NR_ssetmask		 69
-#define __NR_setreuid		 70
-#define __NR_setregid		 71
-#define __NR_sigsuspend		 72
-#define __NR_sigpending		 73
-#define __NR_sethostname	 74
-#define __NR_setrlimit		 75
-#define __NR_getrlimit		 76
-#define __NR_getrusage		 77
-#define __NR_gettimeofday	 78
-#define __NR_settimeofday	 79
-#define __NR_getgroups		 80
-#define __NR_setgroups		 81
-#define __NR_select		 82
-#define __NR_symlink		 83
-#define __NR_oldlstat		 84
-#define __NR_readlink		 85
-#define __NR_uselib		 86
-#define __NR_swapon		 87
-#define __NR_reboot		 88
-#define __NR_readdir		 89
-#define __NR_mmap		 90
-#define __NR_munmap		 91
-#define __NR_truncate		 92
-#define __NR_ftruncate		 93
-#define __NR_fchmod		 94
-#define __NR_fchown		 95
-#define __NR_getpriority	 96
-#define __NR_setpriority	 97
-/*#define __NR_profil		 98*/
-#define __NR_statfs		 99
-#define __NR_fstatfs		100
-/*#define __NR_ioperm		101*/
-#define __NR_socketcall		102
-#define __NR_syslog		103
-#define __NR_setitimer		104
-#define __NR_getitimer		105
-#define __NR_stat		106
-#define __NR_lstat		107
-#define __NR_fstat		108
-/*#define __NR_olduname		109*/
-/*#define __NR_iopl		110*/ /* not supported */
-#define __NR_vhangup		111
-/*#define __NR_idle		112*/ /* Obsolete */
-/*#define __NR_vm86		113*/ /* not supported */
-#define __NR_wait4		114
-#define __NR_swapoff		115
-#define __NR_sysinfo		116
-#define __NR_ipc		117
-#define __NR_fsync		118
-#define __NR_sigreturn		119
-#define __NR_clone		120
-#define __NR_setdomainname	121
-#define __NR_uname		122
-#define __NR_cacheflush		123
-#define __NR_adjtimex		124
-#define __NR_mprotect		125
-#define __NR_sigprocmask	126
-#define __NR_create_module	127
-#define __NR_init_module	128
-#define __NR_delete_module	129
-#define __NR_get_kernel_syms	130
-#define __NR_quotactl		131
-#define __NR_getpgid		132
-#define __NR_fchdir		133
-#define __NR_bdflush		134
-#define __NR_sysfs		135
-#define __NR_personality	136
-/*#define __NR_afs_syscall	137*/ /* Syscall for Andrew File System */
-#define __NR_setfsuid		138
-#define __NR_setfsgid		139
-#define __NR__llseek		140
-#define __NR_getdents		141
-#define __NR__newselect		142
-#define __NR_flock		143
-#define __NR_msync		144
-#define __NR_readv		145
-#define __NR_writev		146
-#define __NR_getsid		147
-#define __NR_fdatasync		148
-#define __NR__sysctl		149
-#define __NR_mlock		150
-#define __NR_munlock		151
-#define __NR_mlockall		152
-#define __NR_munlockall		153
-#define __NR_sched_setparam		154
-#define __NR_sched_getparam		155
-#define __NR_sched_setscheduler		156
-#define __NR_sched_getscheduler		157
-#define __NR_sched_yield		158
-#define __NR_sched_get_priority_max	159
-#define __NR_sched_get_priority_min	160
-#define __NR_sched_rr_get_interval	161
-#define __NR_nanosleep		162
-#define __NR_mremap		163
-#define __NR_setresuid		164
-#define __NR_getresuid		165
-#define __NR_getpagesize	166
-#define __NR_query_module	167
-#define __NR_poll		168
-#define __NR_nfsservctl		169
-#define __NR_setresgid		170
-#define __NR_getresgid		171
-#define __NR_prctl		172
-#define __NR_rt_sigreturn	173
-#define __NR_rt_sigaction	174
-#define __NR_rt_sigprocmask	175
-#define __NR_rt_sigpending	176
-#define __NR_rt_sigtimedwait	177
-#define __NR_rt_sigqueueinfo	178
-#define __NR_rt_sigsuspend	179
-#define __NR_pread64		180
-#define __NR_pwrite64		181
-#define __NR_lchown		182
-#define __NR_getcwd		183
-#define __NR_capget		184
-#define __NR_capset		185
-#define __NR_sigaltstack	186
-#define __NR_sendfile		187
-#define __NR_getpmsg		188	/* some people actually want streams */
-#define __NR_putpmsg		189	/* some people actually want streams */
-#define __NR_vfork		190
-#define __NR_ugetrlimit		191
-#define __NR_mmap2		192
-#define __NR_truncate64		193
-#define __NR_ftruncate64	194
-#define __NR_stat64		195
-#define __NR_lstat64		196
-#define __NR_fstat64		197
-#define __NR_chown32		198
-#define __NR_getuid32		199
-#define __NR_getgid32		200
-#define __NR_geteuid32		201
-#define __NR_getegid32		202
-#define __NR_setreuid32		203
-#define __NR_setregid32		204
-#define __NR_getgroups32	205
-#define __NR_setgroups32	206
-#define __NR_fchown32		207
-#define __NR_setresuid32	208
-#define __NR_getresuid32	209
-#define __NR_setresgid32	210
-#define __NR_getresgid32	211
-#define __NR_lchown32		212
-#define __NR_setuid32		213
-#define __NR_setgid32		214
-#define __NR_setfsuid32		215
-#define __NR_setfsgid32		216
-#define __NR_pivot_root		217
-/* 218*/
-/* 219*/
-#define __NR_getdents64		220
-#define __NR_gettid		221
-#define __NR_tkill		222
-#define __NR_setxattr		223
-#define __NR_lsetxattr		224
-#define __NR_fsetxattr		225
-#define __NR_getxattr		226
-#define __NR_lgetxattr		227
-#define __NR_fgetxattr		228
-#define __NR_listxattr		229
-#define __NR_llistxattr		230
-#define __NR_flistxattr		231
-#define __NR_removexattr	232
-#define __NR_lremovexattr	233
-#define __NR_fremovexattr	234
-#define __NR_futex		235
-#define __NR_sendfile64		236
-#define __NR_mincore		237
-#define __NR_madvise		238
-#define __NR_fcntl64		239
-#define __NR_readahead		240
-#define __NR_io_setup		241
-#define __NR_io_destroy		242
-#define __NR_io_getevents	243
-#define __NR_io_submit		244
-#define __NR_io_cancel		245
-#define __NR_fadvise64		246
-#define __NR_exit_group		247
-#define __NR_lookup_dcookie	248
-#define __NR_epoll_create	249
-#define __NR_epoll_ctl		250
-#define __NR_epoll_wait		251
-#define __NR_remap_file_pages	252
-#define __NR_set_tid_address	253
-#define __NR_timer_create	254
-#define __NR_timer_settime	255
-#define __NR_timer_gettime	256
-#define __NR_timer_getoverrun	257
-#define __NR_timer_delete	258
-#define __NR_clock_settime	259
-#define __NR_clock_gettime	260
-#define __NR_clock_getres	261
-#define __NR_clock_nanosleep	262
-#define __NR_statfs64		263
-#define __NR_fstatfs64		264
-#define __NR_tgkill		265
-#define __NR_utimes		266
-#define __NR_fadvise64_64	267
-#define __NR_mbind		268
-#define __NR_get_mempolicy	269
-#define __NR_set_mempolicy	270
-#define __NR_mq_open		271
-#define __NR_mq_unlink		272
-#define __NR_mq_timedsend	273
-#define __NR_mq_timedreceive	274
-#define __NR_mq_notify		275
-#define __NR_mq_getsetattr	276
-#define __NR_waitid		277
-/*#define __NR_vserver		278*/
-#define __NR_add_key		279
-#define __NR_request_key	280
-#define __NR_keyctl		281
-#define __NR_ioprio_set		282
-#define __NR_ioprio_get		283
-#define __NR_inotify_init	284
-#define __NR_inotify_add_watch	285
-#define __NR_inotify_rm_watch	286
-#define __NR_migrate_pages	287
-#define __NR_openat		288
-#define __NR_mkdirat		289
-#define __NR_mknodat		290
-#define __NR_fchownat		291
-#define __NR_futimesat		292
-#define __NR_fstatat64		293
-#define __NR_unlinkat		294
-#define __NR_renameat		295
-#define __NR_linkat		296
-#define __NR_symlinkat		297
-#define __NR_readlinkat		298
-#define __NR_fchmodat		299
-#define __NR_faccessat		300
-#define __NR_pselect6		301
-#define __NR_ppoll		302
-#define __NR_unshare		303
-#define __NR_set_robust_list	304
-#define __NR_get_robust_list	305
-#define __NR_splice		306
-#define __NR_sync_file_range	307
-#define __NR_tee		308
-#define __NR_vmsplice		309
-#define __NR_move_pages		310
-#define __NR_sched_setaffinity	311
-#define __NR_sched_getaffinity	312
-#define __NR_kexec_load		313
-#define __NR_getcpu		314
-#define __NR_epoll_pwait	315
-#define __NR_utimensat		316
-#define __NR_signalfd		317
-#define __NR_timerfd_create	318
-#define __NR_eventfd		319
-#define __NR_fallocate		320
-#define __NR_timerfd_settime	321
-#define __NR_timerfd_gettime	322
-#define __NR_signalfd4		323
-#define __NR_eventfd2		324
-#define __NR_epoll_create1	325
-#define __NR_dup3		326
-#define __NR_pipe2		327
-#define __NR_inotify_init1	328
-#define __NR_preadv		329
-#define __NR_pwritev		330
-#define __NR_rt_tgsigqueueinfo	331
-#define __NR_perf_event_open	332
-#define __NR_get_thread_area	333
-#define __NR_set_thread_area	334
-#define __NR_atomic_cmpxchg_32	335
-#define __NR_atomic_barrier	336
-#define __NR_fanotify_init	337
-#define __NR_fanotify_mark	338
-#define __NR_prlimit64		339
-#define __NR_name_to_handle_at	340
-#define __NR_open_by_handle_at	341
-#define __NR_clock_adjtime	342
-#define __NR_syncfs		343
-#define __NR_setns		344
-#define __NR_process_vm_readv	345
-#define __NR_process_vm_writev	346
-
-#ifdef __KERNEL__
-
-#define NR_syscalls		347
-
-#define __ARCH_WANT_IPC_PARSE_VERSION
-#define __ARCH_WANT_OLD_READDIR
-#define __ARCH_WANT_OLD_STAT
-#define __ARCH_WANT_STAT64
-#define __ARCH_WANT_SYS_ALARM
-#define __ARCH_WANT_SYS_GETHOSTNAME
-#define __ARCH_WANT_SYS_IPC
-#define __ARCH_WANT_SYS_PAUSE
-#define __ARCH_WANT_SYS_SGETMASK
-#define __ARCH_WANT_SYS_SIGNAL
-#define __ARCH_WANT_SYS_TIME
-#define __ARCH_WANT_SYS_UTIME
-#define __ARCH_WANT_SYS_WAITPID
-#define __ARCH_WANT_SYS_SOCKETCALL
-#define __ARCH_WANT_SYS_FADVISE64
-#define __ARCH_WANT_SYS_GETPGRP
-#define __ARCH_WANT_SYS_LLSEEK
-#define __ARCH_WANT_SYS_NICE
-#define __ARCH_WANT_SYS_OLD_GETRLIMIT
-#define __ARCH_WANT_SYS_OLD_MMAP
-#define __ARCH_WANT_SYS_OLD_SELECT
-#define __ARCH_WANT_SYS_OLDUMOUNT
-#define __ARCH_WANT_SYS_SIGPENDING
-#define __ARCH_WANT_SYS_SIGPROCMASK
-#define __ARCH_WANT_SYS_RT_SIGACTION
-#define __ARCH_WANT_SYS_RT_SIGSUSPEND
-
-/*
- * "Conditional" syscalls
- *
- * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
- * but it doesn't work on all toolchains, so we just do it by hand
- */
-#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall")
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_M68K_UNISTD_H_ */
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/user.h b/ANDROID_3.4.5/arch/m68k/include/asm/user.h
deleted file mode 100644
index f1f478d6..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/user.h
+++ /dev/null
@@ -1,86 +0,0 @@
-#ifndef _M68K_USER_H
-#define _M68K_USER_H
-
-/* Core file format: The core file is written in such a way that gdb
-   can understand it and provide useful information to the user (under
-   linux we use the 'trad-core' bfd).  There are quite a number of
-   obstacles to being able to view the contents of the floating point
-   registers, and until these are solved you will not be able to view the
-   contents of them.  Actually, you can read in the core file and look at
-   the contents of the user struct to find out what the floating point
-   registers contain.
-   The actual file contents are as follows:
-   UPAGE: 1 page consisting of a user struct that tells gdb what is present
-   in the file.  Directly after this is a copy of the task_struct, which
-   is currently not used by gdb, but it may come in useful at some point.
-   All of the registers are stored as part of the upage.  The upage should
-   always be only one page.
-   DATA: The data area is stored.  We use current->end_text to
-   current->brk to pick up all of the user variables, plus any memory
-   that may have been malloced.  No attempt is made to determine if a page
-   is demand-zero or if a page is totally unused, we just cover the entire
-   range.  All of the addresses are rounded in such a way that an integral
-   number of pages is written.
-   STACK: We need the stack information in order to get a meaningful
-   backtrace.  We need to write the data from (esp) to
-   current->start_stack, so we round each of these off in order to be able
-   to write an integer number of pages.
-   The minimum core file size is 3 pages, or 12288 bytes.
-*/
-
-struct user_m68kfp_struct {
-	unsigned long  fpregs[8*3];	/* fp0-fp7 registers */
-	unsigned long  fpcntl[3];	/* fp control regs */
-};
-
-/* This is the old layout of "struct pt_regs" as of Linux 1.x, and
-   is still the layout used by user (the new pt_regs doesn't have
-   all registers). */
-struct user_regs_struct {
-	long d1,d2,d3,d4,d5,d6,d7;
-	long a0,a1,a2,a3,a4,a5,a6;
-	long d0;
-	long usp;
-	long orig_d0;
-	short stkadj;
-	short sr;
-	long pc;
-	short fmtvec;
-	short __fill;
-};
-
-
-/* When the kernel dumps core, it starts by dumping the user struct -
-   this will be used by gdb to figure out where the data and stack segments
-   are within the file, and what virtual addresses to use. */
-struct user{
-/* We start with the registers, to mimic the way that "memory" is returned
-   from the ptrace(3,...) function.  */
-  struct user_regs_struct regs;	/* Where the registers are actually stored */
-/* ptrace does not yet supply these.  Someday.... */
-  int u_fpvalid;		/* True if math co-processor being used. */
-                                /* for this mess. Not yet used. */
-  struct user_m68kfp_struct m68kfp; /* Math Co-processor registers. */
-/* The rest of this junk is to help gdb figure out what goes where */
-  unsigned long int u_tsize;	/* Text segment size (pages). */
-  unsigned long int u_dsize;	/* Data segment size (pages). */
-  unsigned long int u_ssize;	/* Stack segment size (pages). */
-  unsigned long start_code;     /* Starting virtual address of text. */
-  unsigned long start_stack;	/* Starting virtual address of stack area.
-				   This is actually the bottom of the stack,
-				   the top of the stack is always found in the
-				   esp register.  */
-  long int signal;		/* Signal that caused the core dump. */
-  int reserved;			/* No longer used */
-  unsigned long u_ar0;		/* Used by gdb to help find the values for */
-				/* the registers. */
-  struct user_m68kfp_struct* u_fpstate;	/* Math Co-processor pointer. */
-  unsigned long magic;		/* To uniquely identify a core file */
-  char u_comm[32];		/* User command that was responsible */
-};
-#define NBPG 4096
-#define UPAGES 1
-#define HOST_TEXT_START_ADDR (u.start_code)
-#define HOST_STACK_END_ADDR (u.start_stack + u.u_ssize * NBPG)
-
-#endif
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/virtconvert.h b/ANDROID_3.4.5/arch/m68k/include/asm/virtconvert.h
deleted file mode 100644
index f35229b8..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/virtconvert.h
+++ /dev/null
@@ -1,47 +0,0 @@
-#ifndef __VIRT_CONVERT__
-#define __VIRT_CONVERT__
-
-/*
- * Macros used for converting between virtual and physical mappings.
- */
-
-#ifdef __KERNEL__
-
-#include <linux/compiler.h>
-#include <linux/mmzone.h>
-#include <asm/setup.h>
-#include <asm/page.h>
-
-/*
- * Change virtual addresses to physical addresses and vv.
- */
-static inline unsigned long virt_to_phys(void *address)
-{
-	return __pa(address);
-}
-
-static inline void *phys_to_virt(unsigned long address)
-{
-	return __va(address);
-}
-
-/* Permanent address of a page. */
-#ifdef CONFIG_MMU
-#ifdef CONFIG_SINGLE_MEMORY_CHUNK
-#define page_to_phys(page) \
-	__pa(PAGE_OFFSET + (((page) - pg_data_map[0].node_mem_map) << PAGE_SHIFT))
-#else
-#define page_to_phys(page)	(page_to_pfn(page) << PAGE_SHIFT)
-#endif
-#else
-#define page_to_phys(page)	(((page) - mem_map) << PAGE_SHIFT)
-#endif
-
-/*
- * IO bus memory addresses are 1:1 with the physical address,
- */
-#define virt_to_bus virt_to_phys
-#define bus_to_virt phys_to_virt
-
-#endif
-#endif
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/xor.h b/ANDROID_3.4.5/arch/m68k/include/asm/xor.h
deleted file mode 100644
index c82eb12a..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/xor.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/xor.h>
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/zorro.h b/ANDROID_3.4.5/arch/m68k/include/asm/zorro.h
deleted file mode 100644
index 5ce97c22..00000000
--- a/ANDROID_3.4.5/arch/m68k/include/asm/zorro.h
+++ /dev/null
@@ -1,45 +0,0 @@
-#ifndef _ASM_M68K_ZORRO_H
-#define _ASM_M68K_ZORRO_H
-
-#include <asm/raw_io.h>
-
-#define z_readb raw_inb
-#define z_readw raw_inw
-#define z_readl raw_inl
-
-#define z_writeb raw_outb
-#define z_writew raw_outw
-#define z_writel raw_outl
-
-#define z_memset_io(a,b,c)	memset((void *)(a),(b),(c))
-#define z_memcpy_fromio(a,b,c)	memcpy((a),(void *)(b),(c))
-#define z_memcpy_toio(a,b,c)	memcpy((void *)(a),(b),(c))
-
-static inline void __iomem *z_remap_nocache_ser(unsigned long physaddr,
-					unsigned long size)
-{
-	return __ioremap(physaddr, size, IOMAP_NOCACHE_SER);
-}
-
-static inline void __iomem *z_remap_nocache_nonser(unsigned long physaddr,
-					   unsigned long size)
-{
-	return __ioremap(physaddr, size, IOMAP_NOCACHE_NONSER);
-}
-
-static inline void __iomem *z_remap_writethrough(unsigned long physaddr,
-					 unsigned long size)
-{
-	return __ioremap(physaddr, size, IOMAP_WRITETHROUGH);
-}
-static inline void __iomem *z_remap_fullcache(unsigned long physaddr,
-				      unsigned long size)
-{
-	return __ioremap(physaddr, size, IOMAP_FULL_CACHING);
-}
-
-#define z_unmap iounmap
-#define z_iounmap iounmap
-#define z_ioremap z_remap_nocache_ser
-
-#endif /* _ASM_M68K_ZORRO_H */
diff --git a/ANDROID_3.4.5/arch/m68k/install.sh b/ANDROID_3.4.5/arch/m68k/install.sh
deleted file mode 100644
index 57d640d4..00000000
--- a/ANDROID_3.4.5/arch/m68k/install.sh
+++ /dev/null
@@ -1,52 +0,0 @@
-#!/bin/sh
-#
-# This file is subject to the terms and conditions of the GNU General Public
-# License.  See the file "COPYING" in the main directory of this archive
-# for more details.
-#
-# Copyright (C) 1995 by Linus Torvalds
-#
-# Adapted from code in arch/i386/boot/Makefile by H. Peter Anvin
-#
-# "make install" script for m68k architecture
-#
-# Arguments:
-#   $1 - kernel version
-#   $2 - kernel image file
-#   $3 - kernel map file
-#   $4 - default install path (blank if root directory)
-#
-
-verify () {
-	if [ ! -f "$1" ]; then
-		echo ""                                                   1>&2
-		echo " *** Missing file: $1"                              1>&2
-		echo ' *** You need to run "make" before "make install".' 1>&2
-		echo ""                                                   1>&2
-		exit 1
-	fi
-}
-
-# Make sure the files actually exist
-verify "$2"
-verify "$3"
-
-# User may have a custom install script
-
-if [ -x ~/bin/${INSTALLKERNEL} ]; then exec ~/bin/${INSTALLKERNEL} "$@"; fi
-if [ -x /sbin/${INSTALLKERNEL} ]; then exec /sbin/${INSTALLKERNEL} "$@"; fi
-
-# Default install - same as make zlilo
-
-if [ -f $4/vmlinuz ]; then
-	mv $4/vmlinuz $4/vmlinuz.old
-fi
-
-if [ -f $4/System.map ]; then
-	mv $4/System.map $4/System.old
-fi
-
-cat $2 > $4/vmlinuz
-cp $3 $4/System.map
-
-sync
diff --git a/ANDROID_3.4.5/arch/m68k/kernel/Makefile b/ANDROID_3.4.5/arch/m68k/kernel/Makefile
deleted file mode 100644
index 40d29a78..00000000
--- a/ANDROID_3.4.5/arch/m68k/kernel/Makefile
+++ /dev/null
@@ -1,25 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-extra-$(CONFIG_AMIGA)	:= head.o
-extra-$(CONFIG_ATARI)	:= head.o
-extra-$(CONFIG_MAC)	:= head.o
-extra-$(CONFIG_APOLLO)	:= head.o
-extra-$(CONFIG_VME)	:= head.o
-extra-$(CONFIG_HP300)	:= head.o
-extra-$(CONFIG_Q40)	:= head.o
-extra-$(CONFIG_SUN3X)	:= head.o
-extra-$(CONFIG_SUN3)	:= sun3-head.o
-extra-y			+= vmlinux.lds
-
-obj-y	:= entry.o init_task.o irq.o m68k_ksyms.o module.o process.o ptrace.o
-obj-y	+= setup.o signal.o sys_m68k.o syscalltable.o time.o traps.o
-
-obj-$(CONFIG_MMU_MOTOROLA) += ints.o vectors.o
-obj-$(CONFIG_MMU_SUN3) += ints.o vectors.o
-
-ifndef CONFIG_MMU_SUN3
-obj-y	+= dma.o
-endif
-
diff --git a/ANDROID_3.4.5/arch/m68k/kernel/asm-offsets.c b/ANDROID_3.4.5/arch/m68k/kernel/asm-offsets.c
deleted file mode 100644
index a972b00c..00000000
--- a/ANDROID_3.4.5/arch/m68k/kernel/asm-offsets.c
+++ /dev/null
@@ -1,104 +0,0 @@
-/*
- * This program is used to generate definitions needed by
- * assembly language modules.
- *
- * We use the technique used in the OSF Mach kernel code:
- * generate asm statements containing #defines,
- * compile this file to assembler, and then extract the
- * #defines from the assembly-language output.
- */
-
-#define ASM_OFFSETS_C
-
-#include <linux/stddef.h>
-#include <linux/sched.h>
-#include <linux/kernel_stat.h>
-#include <linux/kbuild.h>
-#include <asm/bootinfo.h>
-#include <asm/irq.h>
-#include <asm/amigahw.h>
-#include <linux/font.h>
-
-int main(void)
-{
-	/* offsets into the task struct */
-	DEFINE(TASK_THREAD, offsetof(struct task_struct, thread));
-	DEFINE(TASK_MM, offsetof(struct task_struct, mm));
-	DEFINE(TASK_STACK, offsetof(struct task_struct, stack));
-
-	/* offsets into the thread struct */
-	DEFINE(THREAD_KSP, offsetof(struct thread_struct, ksp));
-	DEFINE(THREAD_USP, offsetof(struct thread_struct, usp));
-	DEFINE(THREAD_SR, offsetof(struct thread_struct, sr));
-	DEFINE(THREAD_FS, offsetof(struct thread_struct, fs));
-	DEFINE(THREAD_CRP, offsetof(struct thread_struct, crp));
-	DEFINE(THREAD_ESP0, offsetof(struct thread_struct, esp0));
-	DEFINE(THREAD_FPREG, offsetof(struct thread_struct, fp));
-	DEFINE(THREAD_FPCNTL, offsetof(struct thread_struct, fpcntl));
-	DEFINE(THREAD_FPSTATE, offsetof(struct thread_struct, fpstate));
-
-	/* offsets into the thread_info struct */
-	DEFINE(TINFO_PREEMPT, offsetof(struct thread_info, preempt_count));
-	DEFINE(TINFO_FLAGS, offsetof(struct thread_info, flags));
-
-	/* offsets into the pt_regs */
-	DEFINE(PT_OFF_D0, offsetof(struct pt_regs, d0));
-	DEFINE(PT_OFF_ORIG_D0, offsetof(struct pt_regs, orig_d0));
-	DEFINE(PT_OFF_D1, offsetof(struct pt_regs, d1));
-	DEFINE(PT_OFF_D2, offsetof(struct pt_regs, d2));
-	DEFINE(PT_OFF_D3, offsetof(struct pt_regs, d3));
-	DEFINE(PT_OFF_D4, offsetof(struct pt_regs, d4));
-	DEFINE(PT_OFF_D5, offsetof(struct pt_regs, d5));
-	DEFINE(PT_OFF_A0, offsetof(struct pt_regs, a0));
-	DEFINE(PT_OFF_A1, offsetof(struct pt_regs, a1));
-	DEFINE(PT_OFF_A2, offsetof(struct pt_regs, a2));
-	DEFINE(PT_OFF_PC, offsetof(struct pt_regs, pc));
-	DEFINE(PT_OFF_SR, offsetof(struct pt_regs, sr));
-
-	/* bitfields are a bit difficult */
-#ifdef CONFIG_COLDFIRE
-	DEFINE(PT_OFF_FORMATVEC, offsetof(struct pt_regs, sr) - 2);
-#else
-	DEFINE(PT_OFF_FORMATVEC, offsetof(struct pt_regs, pc) + 4);
-#endif
-
-	/* offsets into the irq_cpustat_t struct */
-	DEFINE(CPUSTAT_SOFTIRQ_PENDING, offsetof(irq_cpustat_t, __softirq_pending));
-
-	/* signal defines */
-	DEFINE(LSIGSEGV, SIGSEGV);
-	DEFINE(LSEGV_MAPERR, SEGV_MAPERR);
-	DEFINE(LSIGTRAP, SIGTRAP);
-	DEFINE(LTRAP_TRACE, TRAP_TRACE);
-
-#ifdef CONFIG_MMU
-	/* offsets into the bi_record struct */
-	DEFINE(BIR_TAG, offsetof(struct bi_record, tag));
-	DEFINE(BIR_SIZE, offsetof(struct bi_record, size));
-	DEFINE(BIR_DATA, offsetof(struct bi_record, data));
-
-	/* offsets into font_desc (drivers/video/console/font.h) */
-	DEFINE(FONT_DESC_IDX, offsetof(struct font_desc, idx));
-	DEFINE(FONT_DESC_NAME, offsetof(struct font_desc, name));
-	DEFINE(FONT_DESC_WIDTH, offsetof(struct font_desc, width));
-	DEFINE(FONT_DESC_HEIGHT, offsetof(struct font_desc, height));
-	DEFINE(FONT_DESC_DATA, offsetof(struct font_desc, data));
-	DEFINE(FONT_DESC_PREF, offsetof(struct font_desc, pref));
-
-	/* offsets into the custom struct */
-	DEFINE(CUSTOMBASE, &amiga_custom);
-	DEFINE(C_INTENAR, offsetof(struct CUSTOM, intenar));
-	DEFINE(C_INTREQR, offsetof(struct CUSTOM, intreqr));
-	DEFINE(C_INTENA, offsetof(struct CUSTOM, intena));
-	DEFINE(C_INTREQ, offsetof(struct CUSTOM, intreq));
-	DEFINE(C_SERDATR, offsetof(struct CUSTOM, serdatr));
-	DEFINE(C_SERDAT, offsetof(struct CUSTOM, serdat));
-	DEFINE(C_SERPER, offsetof(struct CUSTOM, serper));
-	DEFINE(CIAABASE, &ciaa);
-	DEFINE(CIABBASE, &ciab);
-	DEFINE(C_PRA, offsetof(struct CIA, pra));
-	DEFINE(ZTWOBASE, zTwoBase);
-#endif
-
-	return 0;
-}
diff --git a/ANDROID_3.4.5/arch/m68k/kernel/dma.c b/ANDROID_3.4.5/arch/m68k/kernel/dma.c
deleted file mode 100644
index 90e8cb72..00000000
--- a/ANDROID_3.4.5/arch/m68k/kernel/dma.c
+++ /dev/null
@@ -1,5 +0,0 @@
-#ifdef CONFIG_MMU
-#include "dma_mm.c"
-#else
-#include "dma_no.c"
-#endif
diff --git a/ANDROID_3.4.5/arch/m68k/kernel/dma_mm.c b/ANDROID_3.4.5/arch/m68k/kernel/dma_mm.c
deleted file mode 100644
index a3c471b5..00000000
--- a/ANDROID_3.4.5/arch/m68k/kernel/dma_mm.c
+++ /dev/null
@@ -1,131 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file COPYING in the main directory of this archive
- * for more details.
- */
-
-#undef DEBUG
-
-#include <linux/dma-mapping.h>
-#include <linux/device.h>
-#include <linux/kernel.h>
-#include <linux/scatterlist.h>
-#include <linux/slab.h>
-#include <linux/vmalloc.h>
-#include <linux/export.h>
-
-#include <asm/pgalloc.h>
-
-void *dma_alloc_coherent(struct device *dev, size_t size,
-			 dma_addr_t *handle, gfp_t flag)
-{
-	struct page *page, **map;
-	pgprot_t pgprot;
-	void *addr;
-	int i, order;
-
-	pr_debug("dma_alloc_coherent: %d,%x\n", size, flag);
-
-	size = PAGE_ALIGN(size);
-	order = get_order(size);
-
-	page = alloc_pages(flag, order);
-	if (!page)
-		return NULL;
-
-	*handle = page_to_phys(page);
-	map = kmalloc(sizeof(struct page *) << order, flag & ~__GFP_DMA);
-	if (!map) {
-		__free_pages(page, order);
-		return NULL;
-	}
-	split_page(page, order);
-
-	order = 1 << order;
-	size >>= PAGE_SHIFT;
-	map[0] = page;
-	for (i = 1; i < size; i++)
-		map[i] = page + i;
-	for (; i < order; i++)
-		__free_page(page + i);
-	pgprot = __pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_DIRTY);
-	if (CPU_IS_040_OR_060)
-		pgprot_val(pgprot) |= _PAGE_GLOBAL040 | _PAGE_NOCACHE_S;
-	else
-		pgprot_val(pgprot) |= _PAGE_NOCACHE030;
-	addr = vmap(map, size, VM_MAP, pgprot);
-	kfree(map);
-
-	return addr;
-}
-EXPORT_SYMBOL(dma_alloc_coherent);
-
-void dma_free_coherent(struct device *dev, size_t size,
-		       void *addr, dma_addr_t handle)
-{
-	pr_debug("dma_free_coherent: %p, %x\n", addr, handle);
-	vfree(addr);
-}
-EXPORT_SYMBOL(dma_free_coherent);
-
-void dma_sync_single_for_device(struct device *dev, dma_addr_t handle,
-				size_t size, enum dma_data_direction dir)
-{
-	switch (dir) {
-	case DMA_TO_DEVICE:
-		cache_push(handle, size);
-		break;
-	case DMA_FROM_DEVICE:
-		cache_clear(handle, size);
-		break;
-	default:
-		if (printk_ratelimit())
-			printk("dma_sync_single_for_device: unsupported dir %u\n", dir);
-		break;
-	}
-}
-EXPORT_SYMBOL(dma_sync_single_for_device);
-
-void dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nents,
-			    enum dma_data_direction dir)
-{
-	int i;
-
-	for (i = 0; i < nents; sg++, i++)
-		dma_sync_single_for_device(dev, sg->dma_address, sg->length, dir);
-}
-EXPORT_SYMBOL(dma_sync_sg_for_device);
-
-dma_addr_t dma_map_single(struct device *dev, void *addr, size_t size,
-			  enum dma_data_direction dir)
-{
-	dma_addr_t handle = virt_to_bus(addr);
-
-	dma_sync_single_for_device(dev, handle, size, dir);
-	return handle;
-}
-EXPORT_SYMBOL(dma_map_single);
-
-dma_addr_t dma_map_page(struct device *dev, struct page *page,
-			unsigned long offset, size_t size,
-			enum dma_data_direction dir)
-{
-	dma_addr_t handle = page_to_phys(page) + offset;
-
-	dma_sync_single_for_device(dev, handle, size, dir);
-	return handle;
-}
-EXPORT_SYMBOL(dma_map_page);
-
-int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
-	       enum dma_data_direction dir)
-{
-	int i;
-
-	for (i = 0; i < nents; sg++, i++) {
-		sg->dma_address = sg_phys(sg);
-		dma_sync_single_for_device(dev, sg->dma_address, sg->length, dir);
-	}
-	return nents;
-}
-EXPORT_SYMBOL(dma_map_sg);
diff --git a/ANDROID_3.4.5/arch/m68k/kernel/dma_no.c b/ANDROID_3.4.5/arch/m68k/kernel/dma_no.c
deleted file mode 100644
index f1dc3fc7..00000000
--- a/ANDROID_3.4.5/arch/m68k/kernel/dma_no.c
+++ /dev/null
@@ -1,75 +0,0 @@
-/*
- * Dynamic DMA mapping support.
- *
- * We never have any address translations to worry about, so this
- * is just alloc/free.
- */
-
-#include <linux/types.h>
-#include <linux/gfp.h>
-#include <linux/mm.h>
-#include <linux/device.h>
-#include <linux/dma-mapping.h>
-#include <linux/export.h>
-#include <asm/cacheflush.h>
-
-void *dma_alloc_coherent(struct device *dev, size_t size,
-			   dma_addr_t *dma_handle, gfp_t gfp)
-{
-	void *ret;
-	/* ignore region specifiers */
-	gfp &= ~(__GFP_DMA | __GFP_HIGHMEM);
-
-	if (dev == NULL || (*dev->dma_mask < 0xffffffff))
-		gfp |= GFP_DMA;
-	ret = (void *)__get_free_pages(gfp, get_order(size));
-
-	if (ret != NULL) {
-		memset(ret, 0, size);
-		*dma_handle = virt_to_phys(ret);
-	}
-	return ret;
-}
-
-void dma_free_coherent(struct device *dev, size_t size,
-			 void *vaddr, dma_addr_t dma_handle)
-{
-	free_pages((unsigned long)vaddr, get_order(size));
-}
-
-void dma_sync_single_for_device(struct device *dev, dma_addr_t handle,
-				size_t size, enum dma_data_direction dir)
-{
-	switch (dir) {
-	case DMA_TO_DEVICE:
-		flush_dcache_range(handle, size);
-		break;
-	case DMA_FROM_DEVICE:
-		/* Should be clear already */
-		break;
-	default:
-		if (printk_ratelimit())
-			printk("dma_sync_single_for_device: unsupported dir %u\n", dir);
-		break;
-	}
-}
-
-EXPORT_SYMBOL(dma_sync_single_for_device);
-dma_addr_t dma_map_single(struct device *dev, void *addr, size_t size,
-			  enum dma_data_direction dir)
-{
-	dma_addr_t handle = virt_to_phys(addr);
-	flush_dcache_range(handle, size);
-	return handle;
-}
-EXPORT_SYMBOL(dma_map_single);
-
-dma_addr_t dma_map_page(struct device *dev, struct page *page,
-			unsigned long offset, size_t size,
-			enum dma_data_direction dir)
-{
-	dma_addr_t handle = page_to_phys(page) + offset;
-	dma_sync_single_for_device(dev, handle, size, dir);
-	return handle;
-}
-EXPORT_SYMBOL(dma_map_page);
diff --git a/ANDROID_3.4.5/arch/m68k/kernel/entry.S b/ANDROID_3.4.5/arch/m68k/kernel/entry.S
deleted file mode 100644
index b8daf64e..00000000
--- a/ANDROID_3.4.5/arch/m68k/kernel/entry.S
+++ /dev/null
@@ -1,5 +0,0 @@
-#if defined(CONFIG_MMU) && !defined(CONFIG_COLDFIRE)
-#include "entry_mm.S"
-#else
-#include "entry_no.S"
-#endif
diff --git a/ANDROID_3.4.5/arch/m68k/kernel/entry_mm.S b/ANDROID_3.4.5/arch/m68k/kernel/entry_mm.S
deleted file mode 100644
index 675a8549..00000000
--- a/ANDROID_3.4.5/arch/m68k/kernel/entry_mm.S
+++ /dev/null
@@ -1,419 +0,0 @@
-/* -*- mode: asm -*-
- *
- *  linux/arch/m68k/kernel/entry.S
- *
- *  Copyright (C) 1991, 1992  Linus Torvalds
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file README.legal in the main directory of this archive
- * for more details.
- *
- * Linux/m68k support by Hamish Macdonald
- *
- * 68060 fixes by Jesper Skov
- *
- */
-
-/*
- * entry.S  contains the system-call and fault low-level handling routines.
- * This also contains the timer-interrupt handler, as well as all interrupts
- * and faults that can result in a task-switch.
- *
- * NOTE: This code handles signal-recognition, which happens every time
- * after a timer-interrupt and after each system call.
- *
- */
-
-/*
- * 12/03/96 Jes: Currently we only support m68k single-cpu systems, so
- *               all pointers that used to be 'current' are now entry
- *               number 0 in the 'current_set' list.
- *
- *  6/05/00 RZ:	 addedd writeback completion after return from sighandler
- *		 for 68040
- */
-
-#include <linux/linkage.h>
-#include <asm/entry.h>
-#include <asm/errno.h>
-#include <asm/setup.h>
-#include <asm/segment.h>
-#include <asm/traps.h>
-#include <asm/unistd.h>
-
-#include <asm/asm-offsets.h>
-
-.globl system_call, buserr, trap, resume
-.globl sys_call_table
-.globl sys_fork, sys_clone, sys_vfork
-.globl ret_from_interrupt, bad_interrupt
-.globl auto_irqhandler_fixup
-.globl user_irqvec_fixup
-
-.text
-ENTRY(buserr)
-	SAVE_ALL_INT
-	GET_CURRENT(%d0)
-	movel	%sp,%sp@-		| stack frame pointer argument
-	bsrl	buserr_c
-	addql	#4,%sp
-	jra	.Lret_from_exception
-
-ENTRY(trap)
-	SAVE_ALL_INT
-	GET_CURRENT(%d0)
-	movel	%sp,%sp@-		| stack frame pointer argument
-	bsrl	trap_c
-	addql	#4,%sp
-	jra	.Lret_from_exception
-
-	| After a fork we jump here directly from resume,
-	| so that %d1 contains the previous task
-	| schedule_tail now used regardless of CONFIG_SMP
-ENTRY(ret_from_fork)
-	movel	%d1,%sp@-
-	jsr	schedule_tail
-	addql	#4,%sp
-	jra	.Lret_from_exception
-
-do_trace_entry:
-	movel	#-ENOSYS,%sp@(PT_OFF_D0)| needed for strace
-	subql	#4,%sp
-	SAVE_SWITCH_STACK
-	jbsr	syscall_trace
-	RESTORE_SWITCH_STACK
-	addql	#4,%sp
-	movel	%sp@(PT_OFF_ORIG_D0),%d0
-	cmpl	#NR_syscalls,%d0
-	jcs	syscall
-badsys:
-	movel	#-ENOSYS,%sp@(PT_OFF_D0)
-	jra	ret_from_syscall
-
-do_trace_exit:
-	subql	#4,%sp
-	SAVE_SWITCH_STACK
-	jbsr	syscall_trace
-	RESTORE_SWITCH_STACK
-	addql	#4,%sp
-	jra	.Lret_from_exception
-
-ENTRY(ret_from_signal)
-	movel	%curptr@(TASK_STACK),%a1
-	tstb	%a1@(TINFO_FLAGS+2)
-	jge	1f
-	jbsr	syscall_trace
-1:	RESTORE_SWITCH_STACK
-	addql	#4,%sp
-/* on 68040 complete pending writebacks if any */
-#ifdef CONFIG_M68040
-	bfextu	%sp@(PT_OFF_FORMATVEC){#0,#4},%d0
-	subql	#7,%d0				| bus error frame ?
-	jbne	1f
-	movel	%sp,%sp@-
-	jbsr	berr_040cleanup
-	addql	#4,%sp
-1:
-#endif
-	jra	.Lret_from_exception
-
-ENTRY(system_call)
-	SAVE_ALL_SYS
-
-	GET_CURRENT(%d1)
-	movel	%d1,%a1
-
-	| save top of frame
-	movel	%sp,%curptr@(TASK_THREAD+THREAD_ESP0)
-
-	| syscall trace?
-	tstb	%a1@(TINFO_FLAGS+2)
-	jmi	do_trace_entry
-	cmpl	#NR_syscalls,%d0
-	jcc	badsys
-syscall:
-	jbsr	@(sys_call_table,%d0:l:4)@(0)
-	movel	%d0,%sp@(PT_OFF_D0)	| save the return value
-ret_from_syscall:
-	|oriw	#0x0700,%sr
-	movel	%curptr@(TASK_STACK),%a1
-	movew	%a1@(TINFO_FLAGS+2),%d0
-	jne	syscall_exit_work
-1:	RESTORE_ALL
-
-syscall_exit_work:
-	btst	#5,%sp@(PT_OFF_SR)	| check if returning to kernel
-	bnes	1b			| if so, skip resched, signals
-	lslw	#1,%d0
-	jcs	do_trace_exit
-	jmi	do_delayed_trace
-	lslw	#8,%d0
-	jmi	do_signal_return
-	pea	resume_userspace
-	jra	schedule
-
-
-ENTRY(ret_from_exception)
-.Lret_from_exception:
-	btst	#5,%sp@(PT_OFF_SR)	| check if returning to kernel
-	bnes	1f			| if so, skip resched, signals
-	| only allow interrupts when we are really the last one on the
-	| kernel stack, otherwise stack overflow can occur during
-	| heavy interrupt load
-	andw	#ALLOWINT,%sr
-
-resume_userspace:
-	movel	%curptr@(TASK_STACK),%a1
-	moveb	%a1@(TINFO_FLAGS+3),%d0
-	jne	exit_work
-1:	RESTORE_ALL
-
-exit_work:
-	| save top of frame
-	movel	%sp,%curptr@(TASK_THREAD+THREAD_ESP0)
-	lslb	#1,%d0
-	jmi	do_signal_return
-	pea	resume_userspace
-	jra	schedule
-
-
-do_signal_return:
-	|andw	#ALLOWINT,%sr
-	subql	#4,%sp			| dummy return address
-	SAVE_SWITCH_STACK
-	pea	%sp@(SWITCH_STACK_SIZE)
-	bsrl	do_signal
-	addql	#4,%sp
-	RESTORE_SWITCH_STACK
-	addql	#4,%sp
-	jbra	resume_userspace
-
-do_delayed_trace:
-	bclr	#7,%sp@(PT_OFF_SR)	| clear trace bit in SR
-	pea	1			| send SIGTRAP
-	movel	%curptr,%sp@-
-	pea	LSIGTRAP
-	jbsr	send_sig
-	addql	#8,%sp
-	addql	#4,%sp
-	jbra	resume_userspace
-
-
-/* This is the main interrupt handler for autovector interrupts */
-
-ENTRY(auto_inthandler)
-	SAVE_ALL_INT
-	GET_CURRENT(%d0)
-	movel	%d0,%a1
-	addqb	#1,%a1@(TINFO_PREEMPT+1)
-					|  put exception # in d0
-	bfextu	%sp@(PT_OFF_FORMATVEC){#4,#10},%d0
-	subw	#VEC_SPUR,%d0
-
-	movel	%sp,%sp@-
-	movel	%d0,%sp@-		|  put vector # on stack
-auto_irqhandler_fixup = . + 2
-	jsr	do_IRQ			|  process the IRQ
-	addql	#8,%sp			|  pop parameters off stack
-
-ret_from_interrupt:
-	movel	%curptr@(TASK_STACK),%a1
-	subqb	#1,%a1@(TINFO_PREEMPT+1)
-	jeq	ret_from_last_interrupt
-2:	RESTORE_ALL
-
-	ALIGN
-ret_from_last_interrupt:
-	moveq	#(~ALLOWINT>>8)&0xff,%d0
-	andb	%sp@(PT_OFF_SR),%d0
-	jne	2b
-
-	/* check if we need to do software interrupts */
-	tstl	irq_stat+CPUSTAT_SOFTIRQ_PENDING
-	jeq	.Lret_from_exception
-	pea	ret_from_exception
-	jra	do_softirq
-
-/* Handler for user defined interrupt vectors */
-
-ENTRY(user_inthandler)
-	SAVE_ALL_INT
-	GET_CURRENT(%d0)
-	movel	%d0,%a1
-	addqb	#1,%a1@(TINFO_PREEMPT+1)
-					|  put exception # in d0
-	bfextu	%sp@(PT_OFF_FORMATVEC){#4,#10},%d0
-user_irqvec_fixup = . + 2
-	subw	#VEC_USER,%d0
-
-	movel	%sp,%sp@-
-	movel	%d0,%sp@-		|  put vector # on stack
-	jsr	do_IRQ			|  process the IRQ
-	addql	#8,%sp			|  pop parameters off stack
-
-	movel	%curptr@(TASK_STACK),%a1
-	subqb	#1,%a1@(TINFO_PREEMPT+1)
-	jeq	ret_from_last_interrupt
-	RESTORE_ALL
-
-/* Handler for uninitialized and spurious interrupts */
-
-ENTRY(bad_inthandler)
-	SAVE_ALL_INT
-	GET_CURRENT(%d0)
-	movel	%d0,%a1
-	addqb	#1,%a1@(TINFO_PREEMPT+1)
-
-	movel	%sp,%sp@-
-	jsr	handle_badint
-	addql	#4,%sp
-
-	movel	%curptr@(TASK_STACK),%a1
-	subqb	#1,%a1@(TINFO_PREEMPT+1)
-	jeq	ret_from_last_interrupt
-	RESTORE_ALL
-
-
-ENTRY(sys_fork)
-	SAVE_SWITCH_STACK
-	pea	%sp@(SWITCH_STACK_SIZE)
-	jbsr	m68k_fork
-	addql	#4,%sp
-	RESTORE_SWITCH_STACK
-	rts
-
-ENTRY(sys_clone)
-	SAVE_SWITCH_STACK
-	pea	%sp@(SWITCH_STACK_SIZE)
-	jbsr	m68k_clone
-	addql	#4,%sp
-	RESTORE_SWITCH_STACK
-	rts
-
-ENTRY(sys_vfork)
-	SAVE_SWITCH_STACK
-	pea	%sp@(SWITCH_STACK_SIZE)
-	jbsr	m68k_vfork
-	addql	#4,%sp
-	RESTORE_SWITCH_STACK
-	rts
-
-ENTRY(sys_sigreturn)
-	SAVE_SWITCH_STACK
-	jbsr	do_sigreturn
-	RESTORE_SWITCH_STACK
-	rts
-
-ENTRY(sys_rt_sigreturn)
-	SAVE_SWITCH_STACK
-	jbsr	do_rt_sigreturn
-	RESTORE_SWITCH_STACK
-	rts
-
-resume:
-	/*
-	 * Beware - when entering resume, prev (the current task) is
-	 * in a0, next (the new task) is in a1,so don't change these
-	 * registers until their contents are no longer needed.
-	 */
-
-	/* save sr */
-	movew	%sr,%a0@(TASK_THREAD+THREAD_SR)
-
-	/* save fs (sfc,%dfc) (may be pointing to kernel memory) */
-	movec	%sfc,%d0
-	movew	%d0,%a0@(TASK_THREAD+THREAD_FS)
-
-	/* save usp */
-	/* it is better to use a movel here instead of a movew 8*) */
-	movec	%usp,%d0
-	movel	%d0,%a0@(TASK_THREAD+THREAD_USP)
-
-	/* save non-scratch registers on stack */
-	SAVE_SWITCH_STACK
-
-	/* save current kernel stack pointer */
-	movel	%sp,%a0@(TASK_THREAD+THREAD_KSP)
-
-	/* save floating point context */
-#ifndef CONFIG_M68KFPU_EMU_ONLY
-#ifdef CONFIG_M68KFPU_EMU
-	tstl	m68k_fputype
-	jeq	3f
-#endif
-	fsave	%a0@(TASK_THREAD+THREAD_FPSTATE)
-
-#if defined(CONFIG_M68060)
-#if !defined(CPU_M68060_ONLY)
-	btst	#3,m68k_cputype+3
-	beqs	1f
-#endif
-	/* The 060 FPU keeps status in bits 15-8 of the first longword */
-	tstb	%a0@(TASK_THREAD+THREAD_FPSTATE+2)
-	jeq	3f
-#if !defined(CPU_M68060_ONLY)
-	jra	2f
-#endif
-#endif /* CONFIG_M68060 */
-#if !defined(CPU_M68060_ONLY)
-1:	tstb	%a0@(TASK_THREAD+THREAD_FPSTATE)
-	jeq	3f
-#endif
-2:	fmovemx	%fp0-%fp7,%a0@(TASK_THREAD+THREAD_FPREG)
-	fmoveml	%fpcr/%fpsr/%fpiar,%a0@(TASK_THREAD+THREAD_FPCNTL)
-3:
-#endif	/* CONFIG_M68KFPU_EMU_ONLY */
-	/* Return previous task in %d1 */
-	movel	%curptr,%d1
-
-	/* switch to new task (a1 contains new task) */
-	movel	%a1,%curptr
-
-	/* restore floating point context */
-#ifndef CONFIG_M68KFPU_EMU_ONLY
-#ifdef CONFIG_M68KFPU_EMU
-	tstl	m68k_fputype
-	jeq	4f
-#endif
-#if defined(CONFIG_M68060)
-#if !defined(CPU_M68060_ONLY)
-	btst	#3,m68k_cputype+3
-	beqs	1f
-#endif
-	/* The 060 FPU keeps status in bits 15-8 of the first longword */
-	tstb	%a1@(TASK_THREAD+THREAD_FPSTATE+2)
-	jeq	3f
-#if !defined(CPU_M68060_ONLY)
-	jra	2f
-#endif
-#endif /* CONFIG_M68060 */
-#if !defined(CPU_M68060_ONLY)
-1:	tstb	%a1@(TASK_THREAD+THREAD_FPSTATE)
-	jeq	3f
-#endif
-2:	fmovemx	%a1@(TASK_THREAD+THREAD_FPREG),%fp0-%fp7
-	fmoveml	%a1@(TASK_THREAD+THREAD_FPCNTL),%fpcr/%fpsr/%fpiar
-3:	frestore %a1@(TASK_THREAD+THREAD_FPSTATE)
-4:
-#endif	/* CONFIG_M68KFPU_EMU_ONLY */
-
-	/* restore the kernel stack pointer */
-	movel	%a1@(TASK_THREAD+THREAD_KSP),%sp
-
-	/* restore non-scratch registers */
-	RESTORE_SWITCH_STACK
-
-	/* restore user stack pointer */
-	movel	%a1@(TASK_THREAD+THREAD_USP),%a0
-	movel	%a0,%usp
-
-	/* restore fs (sfc,%dfc) */
-	movew	%a1@(TASK_THREAD+THREAD_FS),%a0
-	movec	%a0,%sfc
-	movec	%a0,%dfc
-
-	/* restore status register */
-	movew	%a1@(TASK_THREAD+THREAD_SR),%sr
-
-	rts
-
diff --git a/ANDROID_3.4.5/arch/m68k/kernel/entry_no.S b/ANDROID_3.4.5/arch/m68k/kernel/entry_no.S
deleted file mode 100644
index d80cba45..00000000
--- a/ANDROID_3.4.5/arch/m68k/kernel/entry_no.S
+++ /dev/null
@@ -1,130 +0,0 @@
-/*
- *  linux/arch/m68knommu/kernel/entry.S
- *
- *  Copyright (C) 1999-2002, Greg Ungerer (gerg@snapgear.com)
- *  Copyright (C) 1998  D. Jeff Dionne <jeff@lineo.ca>,
- *                      Kenneth Albanowski <kjahds@kjahds.com>,
- *  Copyright (C) 2000  Lineo Inc. (www.lineo.com) 
- *
- * Based on:
- *
- *  linux/arch/m68k/kernel/entry.S
- *
- *  Copyright (C) 1991, 1992  Linus Torvalds
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file README.legal in the main directory of this archive
- * for more details.
- *
- * Linux/m68k support by Hamish Macdonald
- *
- * 68060 fixes by Jesper Skov
- * ColdFire support by Greg Ungerer (gerg@snapgear.com)
- * 5307 fixes by David W. Miller
- * linux 2.4 support David McCullough <davidm@snapgear.com>
- */
-
-#include <linux/linkage.h>
-#include <asm/errno.h>
-#include <asm/setup.h>
-#include <asm/segment.h>
-#include <asm/asm-offsets.h>
-#include <asm/entry.h>
-#include <asm/unistd.h>
-
-.text
-
-.globl buserr
-.globl trap
-.globl ret_from_exception
-.globl ret_from_signal
-.globl sys_fork
-.globl sys_clone
-.globl sys_vfork
-
-ENTRY(buserr)
-	SAVE_ALL_INT
-	GET_CURRENT(%d0)
-	movel	%sp,%sp@- 		/* stack frame pointer argument */
-	jsr	buserr_c
-	addql	#4,%sp
-	jra	ret_from_exception
-
-ENTRY(trap)
-	SAVE_ALL_INT
-	GET_CURRENT(%d0)
-	movel	%sp,%sp@- 		/* stack frame pointer argument */
-	jsr	trap_c
-	addql	#4,%sp
-	jra	ret_from_exception
-
-#ifdef TRAP_DBG_INTERRUPT
-
-.globl dbginterrupt
-ENTRY(dbginterrupt)
-	SAVE_ALL_INT
-	GET_CURRENT(%d0)
-	movel	%sp,%sp@- 		/* stack frame pointer argument */
-	jsr	dbginterrupt_c
-	addql	#4,%sp
-	jra	ret_from_exception
-#endif
-
-ENTRY(reschedule)
-	/* save top of frame */
-	pea	%sp@
-	jbsr	set_esp0
-	addql	#4,%sp
-	pea	ret_from_exception
-	jmp	schedule
-
-ENTRY(ret_from_fork)
-	movel	%d1,%sp@-
-	jsr	schedule_tail
-	addql	#4,%sp
-	jra	ret_from_exception
-
-ENTRY(sys_fork)
-	SAVE_SWITCH_STACK
-	pea	%sp@(SWITCH_STACK_SIZE)
-	jbsr	m68k_fork
-	addql	#4,%sp
-	RESTORE_SWITCH_STACK
-	rts
-
-ENTRY(sys_vfork)
-	SAVE_SWITCH_STACK
-	pea	%sp@(SWITCH_STACK_SIZE)
-	jbsr	m68k_vfork
-	addql	#4,%sp
-	RESTORE_SWITCH_STACK
-	rts
-
-ENTRY(sys_clone)
-	SAVE_SWITCH_STACK
-	pea	%sp@(SWITCH_STACK_SIZE)
-	jbsr	m68k_clone
-	addql	#4,%sp
-	RESTORE_SWITCH_STACK
-	rts
-
-ENTRY(sys_sigreturn)
-	SAVE_SWITCH_STACK
-	jbsr	do_sigreturn
-	RESTORE_SWITCH_STACK
-	rts
-
-ENTRY(sys_rt_sigreturn)
-	SAVE_SWITCH_STACK
-	jbsr	do_rt_sigreturn
-	RESTORE_SWITCH_STACK
-	rts
-
-ENTRY(ret_from_user_signal)
-	moveq #__NR_sigreturn,%d0
-	trap #0
-
-ENTRY(ret_from_user_rt_signal)
-	movel #__NR_rt_sigreturn,%d0
-	trap #0
-
diff --git a/ANDROID_3.4.5/arch/m68k/kernel/head.S b/ANDROID_3.4.5/arch/m68k/kernel/head.S
deleted file mode 100644
index d197e7ff..00000000
--- a/ANDROID_3.4.5/arch/m68k/kernel/head.S
+++ /dev/null
@@ -1,3942 +0,0 @@
-/* -*- mode: asm -*-
-**
-** head.S -- This file contains the initial boot code for the
-**	     Linux/68k kernel.
-**
-** Copyright 1993 by Hamish Macdonald
-**
-** 68040 fixes by Michael Rausch
-** 68060 fixes by Roman Hodek
-** MMU cleanup by Randy Thelen
-** Final MMU cleanup by Roman Zippel
-**
-** Atari support by Andreas Schwab, using ideas of Robert de Vries
-** and Bjoern Brauel
-** VME Support by Richard Hirst
-**
-** 94/11/14 Andreas Schwab: put kernel at PAGESIZE
-** 94/11/18 Andreas Schwab: remove identity mapping of STRAM for Atari
-** ++ Bjoern & Roman: ATARI-68040 support for the Medusa
-** 95/11/18 Richard Hirst: Added MVME166 support
-** 96/04/26 Guenther Kelleter: fixed identity mapping for Falcon with
-**			      Magnum- and FX-alternate ram
-** 98/04/25 Phil Blundell: added HP300 support
-** 1998/08/30 David Kilzer: Added support for font_desc structures
-**            for linux-2.1.115
-** 9/02/11  Richard Zidlicky: added Q40 support (initial vesion 99/01/01)
-** 2004/05/13 Kars de Jong: Finalised HP300 support
-**
-** This file is subject to the terms and conditions of the GNU General Public
-** License. See the file README.legal in the main directory of this archive
-** for more details.
-**
-*/
-
-/*
- * Linux startup code.
- *
- * At this point, the boot loader has:
- * Disabled interrupts
- * Disabled caches
- * Put us in supervisor state.
- *
- * The kernel setup code takes the following steps:
- * .  Raise interrupt level
- * .  Set up initial kernel memory mapping.
- *    .  This sets up a mapping of the 4M of memory the kernel is located in.
- *    .  It also does a mapping of any initial machine specific areas.
- * .  Enable the MMU
- * .  Enable cache memories
- * .  Jump to kernel startup
- *
- * Much of the file restructuring was to accomplish:
- * 1) Remove register dependency through-out the file.
- * 2) Increase use of subroutines to perform functions
- * 3) Increase readability of the code
- *
- * Of course, readability is a subjective issue, so it will never be
- * argued that that goal was accomplished.  It was merely a goal.
- * A key way to help make code more readable is to give good
- * documentation.  So, the first thing you will find is exaustive
- * write-ups on the structure of the file, and the features of the
- * functional subroutines.
- *
- * General Structure:
- * ------------------
- *	Without a doubt the single largest chunk of head.S is spent
- * mapping the kernel and I/O physical space into the logical range
- * for the kernel.
- *	There are new subroutines and data structures to make MMU
- * support cleaner and easier to understand.
- *	First, you will find a routine call "mmu_map" which maps
- * a logical to a physical region for some length given a cache
- * type on behalf of the caller.  This routine makes writing the
- * actual per-machine specific code very simple.
- *	A central part of the code, but not a subroutine in itself,
- * is the mmu_init code which is broken down into mapping the kernel
- * (the same for all machines) and mapping machine-specific I/O
- * regions.
- *	Also, there will be a description of engaging the MMU and
- * caches.
- *	You will notice that there is a chunk of code which
- * can emit the entire MMU mapping of the machine.  This is present
- * only in debug modes and can be very helpful.
- *	Further, there is a new console driver in head.S that is
- * also only engaged in debug mode.  Currently, it's only supported
- * on the Macintosh class of machines.  However, it is hoped that
- * others will plug-in support for specific machines.
- *
- * ######################################################################
- *
- * mmu_map
- * -------
- *	mmu_map was written for two key reasons.  First, it was clear
- * that it was very difficult to read the previous code for mapping
- * regions of memory.  Second, the Macintosh required such extensive
- * memory allocations that it didn't make sense to propagate the
- * existing code any further.
- *	mmu_map requires some parameters:
- *
- *	mmu_map (logical, physical, length, cache_type)
- *
- *	While this essentially describes the function in the abstract, you'll
- * find more indepth description of other parameters at the implementation site.
- *
- * mmu_get_root_table_entry
- * ------------------------
- * mmu_get_ptr_table_entry
- * -----------------------
- * mmu_get_page_table_entry
- * ------------------------
- *
- *	These routines are used by other mmu routines to get a pointer into
- * a table, if necessary a new table is allocated. These routines are working
- * basically like pmd_alloc() and pte_alloc() in <asm/pgtable.h>. The root
- * table needs of course only to be allocated once in mmu_get_root_table_entry,
- * so that here also some mmu specific initialization is done. The second page
- * at the start of the kernel (the first page is unmapped later) is used for
- * the kernel_pg_dir. It must be at a position known at link time (as it's used
- * to initialize the init task struct) and since it needs special cache
- * settings, it's the easiest to use this page, the rest of the page is used
- * for further pointer tables.
- * mmu_get_page_table_entry allocates always a whole page for page tables, this
- * means 1024 pages and so 4MB of memory can be mapped. It doesn't make sense
- * to manage page tables in smaller pieces as nearly all mappings have that
- * size.
- *
- * ######################################################################
- *
- *
- * ######################################################################
- *
- * mmu_engage
- * ----------
- *	Thanks to a small helping routine enabling the mmu got quite simple
- * and there is only one way left. mmu_engage makes a complete a new mapping
- * that only includes the absolute necessary to be able to jump to the final
- * position and to restore the original mapping.
- * As this code doesn't need a transparent translation register anymore this
- * means all registers are free to be used by machines that needs them for
- * other purposes.
- *
- * ######################################################################
- *
- * mmu_print
- * ---------
- *	This algorithm will print out the page tables of the system as
- * appropriate for an 030 or an 040.  This is useful for debugging purposes
- * and as such is enclosed in #ifdef MMU_PRINT/#endif clauses.
- *
- * ######################################################################
- *
- * console_init
- * ------------
- *	The console is also able to be turned off.  The console in head.S
- * is specifically for debugging and can be very useful.  It is surrounded by
- * #ifdef CONSOLE/#endif clauses so it doesn't have to ship in known-good
- * kernels.  It's basic algorithm is to determine the size of the screen
- * (in height/width and bit depth) and then use that information for
- * displaying an 8x8 font or an 8x16 (widthxheight).  I prefer the 8x8 for
- * debugging so I can see more good data.  But it was trivial to add support
- * for both fonts, so I included it.
- *	Also, the algorithm for plotting pixels is abstracted so that in
- * theory other platforms could add support for different kinds of frame
- * buffers.  This could be very useful.
- *
- * console_put_penguin
- * -------------------
- *	An important part of any Linux bring up is the penguin and there's
- * nothing like getting the Penguin on the screen!  This algorithm will work
- * on any machine for which there is a console_plot_pixel.
- *
- * console_scroll
- * --------------
- *	My hope is that the scroll algorithm does the right thing on the
- * various platforms, but it wouldn't be hard to add the test conditions
- * and new code if it doesn't.
- *
- * console_putc
- * -------------
- *
- * ######################################################################
- *
- *	Register usage has greatly simplified within head.S. Every subroutine
- * saves and restores all registers that it modifies (except it returns a
- * value in there of course). So the only register that needs to be initialized
- * is the stack pointer.
- * All other init code and data is now placed in the init section, so it will
- * be automatically freed at the end of the kernel initialization.
- *
- * ######################################################################
- *
- * options
- * -------
- *	There are many options available in a build of this file.  I've
- * taken the time to describe them here to save you the time of searching
- * for them and trying to understand what they mean.
- *
- * CONFIG_xxx:	These are the obvious machine configuration defines created
- * during configuration.  These are defined in autoconf.h.
- *
- * CONSOLE:	There is support for head.S console in this file.  This
- * console can talk to a Mac frame buffer, but could easily be extrapolated
- * to extend it to support other platforms.
- *
- * TEST_MMU:	This is a test harness for running on any given machine but
- * getting an MMU dump for another class of machine.  The classes of machines
- * that can be tested are any of the makes (Atari, Amiga, Mac, VME, etc.)
- * and any of the models (030, 040, 060, etc.).
- *
- *	NOTE:	TEST_MMU is NOT permanent!  It is scheduled to be removed
- *		When head.S boots on Atari, Amiga, Macintosh, and VME
- *		machines.  At that point the underlying logic will be
- *		believed to be solid enough to be trusted, and TEST_MMU
- *		can be dropped.  Do note that that will clean up the
- *		head.S code significantly as large blocks of #if/#else
- *		clauses can be removed.
- *
- * MMU_NOCACHE_KERNEL:	On the Macintosh platform there was an inquiry into
- * determing why devices don't appear to work.  A test case was to remove
- * the cacheability of the kernel bits.
- *
- * MMU_PRINT:	There is a routine built into head.S that can display the
- * MMU data structures.  It outputs its result through the serial_putc
- * interface.  So where ever that winds up driving data, that's where the
- * mmu struct will appear.  On the Macintosh that's typically the console.
- *
- * SERIAL_DEBUG:	There are a series of putc() macro statements
- * scattered through out the code to give progress of status to the
- * person sitting at the console.  This constant determines whether those
- * are used.
- *
- * DEBUG:	This is the standard DEBUG flag that can be set for building
- *		the kernel.  It has the effect adding additional tests into
- *		the code.
- *
- * FONT_6x11:
- * FONT_8x8:
- * FONT_8x16:
- *		In theory these could be determined at run time or handed
- *		over by the booter.  But, let's be real, it's a fine hard
- *		coded value.  (But, you will notice the code is run-time
- *		flexible!)  A pointer to the font's struct font_desc
- *		is kept locally in Lconsole_font.  It is used to determine
- *		font size information dynamically.
- *
- * Atari constants:
- * USE_PRINTER:	Use the printer port for serial debug.
- * USE_SCC_B:	Use the SCC port A (Serial2) for serial debug.
- * USE_SCC_A:	Use the SCC port B (Modem2) for serial debug.
- * USE_MFP:	Use the ST-MFP port (Modem1) for serial debug.
- *
- * Macintosh constants:
- * MAC_USE_SCC_A: Use SCC port A (modem) for serial debug and early console.
- * MAC_USE_SCC_B: Use SCC port B (printer) for serial debug and early console.
- */
-
-#include <linux/linkage.h>
-#include <linux/init.h>
-#include <asm/bootinfo.h>
-#include <asm/setup.h>
-#include <asm/entry.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/asm-offsets.h>
-
-#ifdef CONFIG_MAC
-
-#include <asm/machw.h>
-
-#ifdef CONFIG_FRAMEBUFFER_CONSOLE
-#define CONSOLE
-#define CONSOLE_PENGUIN
-#endif
-
-#ifdef CONFIG_EARLY_PRINTK
-#define SERIAL_DEBUG
-#else
-#undef SERIAL_DEBUG
-#endif
-
-#else /* !CONFIG_MAC */
-
-#define SERIAL_DEBUG
-
-#endif /* !CONFIG_MAC */
-
-#undef MMU_PRINT
-#undef MMU_NOCACHE_KERNEL
-#undef DEBUG
-
-/*
- * For the head.S console, there are three supported fonts, 6x11, 8x16 and 8x8.
- * The 8x8 font is harder to read but fits more on the screen.
- */
-#define FONT_8x8	/* default */
-/* #define FONT_8x16 */	/* 2nd choice */
-/* #define FONT_6x11 */	/* 3rd choice */
-
-.globl kernel_pg_dir
-.globl availmem
-.globl m68k_pgtable_cachemode
-.globl m68k_supervisor_cachemode
-#ifdef CONFIG_MVME16x
-.globl mvme_bdid
-#endif
-#ifdef CONFIG_Q40
-.globl q40_mem_cptr
-#endif
-
-CPUTYPE_040	= 1	/* indicates an 040 */
-CPUTYPE_060	= 2	/* indicates an 060 */
-CPUTYPE_0460	= 3	/* if either above are set, this is set */
-CPUTYPE_020	= 4	/* indicates an 020 */
-
-/* Translation control register */
-TC_ENABLE = 0x8000
-TC_PAGE8K = 0x4000
-TC_PAGE4K = 0x0000
-
-/* Transparent translation registers */
-TTR_ENABLE	= 0x8000	/* enable transparent translation */
-TTR_ANYMODE	= 0x4000	/* user and kernel mode access */
-TTR_KERNELMODE	= 0x2000	/* only kernel mode access */
-TTR_USERMODE	= 0x0000	/* only user mode access */
-TTR_CI		= 0x0400	/* inhibit cache */
-TTR_RW		= 0x0200	/* read/write mode */
-TTR_RWM		= 0x0100	/* read/write mask */
-TTR_FCB2	= 0x0040	/* function code base bit 2 */
-TTR_FCB1	= 0x0020	/* function code base bit 1 */
-TTR_FCB0	= 0x0010	/* function code base bit 0 */
-TTR_FCM2	= 0x0004	/* function code mask bit 2 */
-TTR_FCM1	= 0x0002	/* function code mask bit 1 */
-TTR_FCM0	= 0x0001	/* function code mask bit 0 */
-
-/* Cache Control registers */
-CC6_ENABLE_D	= 0x80000000	/* enable data cache (680[46]0) */
-CC6_FREEZE_D	= 0x40000000	/* freeze data cache (68060) */
-CC6_ENABLE_SB	= 0x20000000	/* enable store buffer (68060) */
-CC6_PUSH_DPI	= 0x10000000	/* disable CPUSH invalidation (68060) */
-CC6_HALF_D	= 0x08000000	/* half-cache mode for data cache (68060) */
-CC6_ENABLE_B	= 0x00800000	/* enable branch cache (68060) */
-CC6_CLRA_B	= 0x00400000	/* clear all entries in branch cache (68060) */
-CC6_CLRU_B	= 0x00200000	/* clear user entries in branch cache (68060) */
-CC6_ENABLE_I	= 0x00008000	/* enable instruction cache (680[46]0) */
-CC6_FREEZE_I	= 0x00004000	/* freeze instruction cache (68060) */
-CC6_HALF_I	= 0x00002000	/* half-cache mode for instruction cache (68060) */
-CC3_ALLOC_WRITE	= 0x00002000	/* write allocate mode(68030) */
-CC3_ENABLE_DB	= 0x00001000	/* enable data burst (68030) */
-CC3_CLR_D	= 0x00000800	/* clear data cache (68030) */
-CC3_CLRE_D	= 0x00000400	/* clear entry in data cache (68030) */
-CC3_FREEZE_D	= 0x00000200	/* freeze data cache (68030) */
-CC3_ENABLE_D	= 0x00000100	/* enable data cache (68030) */
-CC3_ENABLE_IB	= 0x00000010	/* enable instruction burst (68030) */
-CC3_CLR_I	= 0x00000008	/* clear instruction cache (68030) */
-CC3_CLRE_I	= 0x00000004	/* clear entry in instruction cache (68030) */
-CC3_FREEZE_I	= 0x00000002	/* freeze instruction cache (68030) */
-CC3_ENABLE_I	= 0x00000001	/* enable instruction cache (68030) */
-
-/* Miscellaneous definitions */
-PAGESIZE	= 4096
-PAGESHIFT	= 12
-
-ROOT_TABLE_SIZE	= 128
-PTR_TABLE_SIZE	= 128
-PAGE_TABLE_SIZE	= 64
-ROOT_INDEX_SHIFT = 25
-PTR_INDEX_SHIFT  = 18
-PAGE_INDEX_SHIFT = 12
-
-#ifdef DEBUG
-/* When debugging use readable names for labels */
-#ifdef __STDC__
-#define L(name) .head.S.##name
-#else
-#define L(name) .head.S./**/name
-#endif
-#else
-#ifdef __STDC__
-#define L(name) .L##name
-#else
-#define L(name) .L/**/name
-#endif
-#endif
-
-/* The __INITDATA stuff is a no-op when ftrace or kgdb are turned on */
-#ifndef __INITDATA
-#define __INITDATA	.data
-#define __FINIT		.previous
-#endif
-
-/* Several macros to make the writing of subroutines easier:
- * - func_start marks the beginning of the routine which setups the frame
- *   register and saves the registers, it also defines another macro
- *   to automatically restore the registers again.
- * - func_return marks the end of the routine and simply calls the prepared
- *   macro to restore registers and jump back to the caller.
- * - func_define generates another macro to automatically put arguments
- *   onto the stack call the subroutine and cleanup the stack again.
- */
-
-/* Within subroutines these macros can be used to access the arguments
- * on the stack. With STACK some allocated memory on the stack can be
- * accessed and ARG0 points to the return address (used by mmu_engage).
- */
-#define	STACK	%a6@(stackstart)
-#define ARG0	%a6@(4)
-#define ARG1	%a6@(8)
-#define ARG2	%a6@(12)
-#define ARG3	%a6@(16)
-#define ARG4	%a6@(20)
-
-.macro	func_start	name,saveregs,stack=0
-L(\name):
-	linkw	%a6,#-\stack
-	moveml	\saveregs,%sp@-
-.set	stackstart,-\stack
-
-.macro	func_return_\name
-	moveml	%sp@+,\saveregs
-	unlk	%a6
-	rts
-.endm
-.endm
-
-.macro	func_return	name
-	func_return_\name
-.endm
-
-.macro	func_call	name
-	jbsr	L(\name)
-.endm
-
-.macro	move_stack	nr,arg1,arg2,arg3,arg4
-.if	\nr
-	move_stack	"(\nr-1)",\arg2,\arg3,\arg4
-	movel	\arg1,%sp@-
-.endif
-.endm
-
-.macro	func_define	name,nr=0
-.macro	\name	arg1,arg2,arg3,arg4
-	move_stack	\nr,\arg1,\arg2,\arg3,\arg4
-	func_call	\name
-.if	\nr
-	lea	%sp@(\nr*4),%sp
-.endif
-.endm
-.endm
-
-func_define	mmu_map,4
-func_define	mmu_map_tt,4
-func_define	mmu_fixup_page_mmu_cache,1
-func_define	mmu_temp_map,2
-func_define	mmu_engage
-func_define	mmu_get_root_table_entry,1
-func_define	mmu_get_ptr_table_entry,2
-func_define	mmu_get_page_table_entry,2
-func_define	mmu_print
-func_define	get_new_page
-#if defined(CONFIG_HP300) || defined(CONFIG_APOLLO)
-func_define	set_leds
-#endif
-
-.macro	mmu_map_eq	arg1,arg2,arg3
-	mmu_map	\arg1,\arg1,\arg2,\arg3
-.endm
-
-.macro	get_bi_record	record
-	pea	\record
-	func_call	get_bi_record
-	addql	#4,%sp
-.endm
-
-func_define	serial_putc,1
-func_define	console_putc,1
-
-func_define	console_init
-func_define	console_put_stats
-func_define	console_put_penguin
-func_define	console_plot_pixel,3
-func_define	console_scroll
-
-.macro	putc	ch
-#if defined(CONSOLE) || defined(SERIAL_DEBUG)
-	pea	\ch
-#endif
-#ifdef CONSOLE
-	func_call	console_putc
-#endif
-#ifdef SERIAL_DEBUG
-	func_call	serial_putc
-#endif
-#if defined(CONSOLE) || defined(SERIAL_DEBUG)
-	addql	#4,%sp
-#endif
-.endm
-
-.macro	dputc	ch
-#ifdef DEBUG
-	putc	\ch
-#endif
-.endm
-
-func_define	putn,1
-
-.macro	dputn	nr
-#ifdef DEBUG
-	putn	\nr
-#endif
-.endm
-
-.macro	puts		string
-#if defined(CONSOLE) || defined(SERIAL_DEBUG)
-	__INITDATA
-.Lstr\@:
-	.string	"\string"
-	__FINIT
-	pea	%pc@(.Lstr\@)
-	func_call	puts
-	addql	#4,%sp
-#endif
-.endm
-
-.macro	dputs	string
-#ifdef DEBUG
-	puts	"\string"
-#endif
-.endm
-
-#define is_not_amiga(lab) cmpl &MACH_AMIGA,%pc@(m68k_machtype); jne lab
-#define is_not_atari(lab) cmpl &MACH_ATARI,%pc@(m68k_machtype); jne lab
-#define is_not_mac(lab) cmpl &MACH_MAC,%pc@(m68k_machtype); jne lab
-#define is_not_mvme147(lab) cmpl &MACH_MVME147,%pc@(m68k_machtype); jne lab
-#define is_not_mvme16x(lab) cmpl &MACH_MVME16x,%pc@(m68k_machtype); jne lab
-#define is_not_bvme6000(lab) cmpl &MACH_BVME6000,%pc@(m68k_machtype); jne lab
-#define is_mvme147(lab) cmpl &MACH_MVME147,%pc@(m68k_machtype); jeq lab
-#define is_mvme16x(lab) cmpl &MACH_MVME16x,%pc@(m68k_machtype); jeq lab
-#define is_bvme6000(lab) cmpl &MACH_BVME6000,%pc@(m68k_machtype); jeq lab
-#define is_not_hp300(lab) cmpl &MACH_HP300,%pc@(m68k_machtype); jne lab
-#define is_not_apollo(lab) cmpl &MACH_APOLLO,%pc@(m68k_machtype); jne lab
-#define is_not_q40(lab) cmpl &MACH_Q40,%pc@(m68k_machtype); jne lab
-#define is_not_sun3x(lab) cmpl &MACH_SUN3X,%pc@(m68k_machtype); jne lab
-
-#define hasnt_leds(lab) cmpl &MACH_HP300,%pc@(m68k_machtype); \
-			jeq 42f; \
-			cmpl &MACH_APOLLO,%pc@(m68k_machtype); \
-			jne lab ;\
-		42:\
-
-#define is_040_or_060(lab)	btst &CPUTYPE_0460,%pc@(L(cputype)+3); jne lab
-#define is_not_040_or_060(lab)	btst &CPUTYPE_0460,%pc@(L(cputype)+3); jeq lab
-#define is_040(lab)		btst &CPUTYPE_040,%pc@(L(cputype)+3); jne lab
-#define is_060(lab)		btst &CPUTYPE_060,%pc@(L(cputype)+3); jne lab
-#define is_not_060(lab)		btst &CPUTYPE_060,%pc@(L(cputype)+3); jeq lab
-#define is_020(lab)		btst &CPUTYPE_020,%pc@(L(cputype)+3); jne lab
-#define is_not_020(lab)		btst &CPUTYPE_020,%pc@(L(cputype)+3); jeq lab
-
-/* On the HP300 we use the on-board LEDs for debug output before
-   the console is running.  Writing a 1 bit turns the corresponding LED
-   _off_ - on the 340 bit 7 is towards the back panel of the machine.  */
-.macro	leds	mask
-#if defined(CONFIG_HP300) || defined(CONFIG_APOLLO)
-	hasnt_leds(.Lled\@)
-	pea	\mask
-	func_call	set_leds
-	addql	#4,%sp
-.Lled\@:
-#endif
-.endm
-
-__HEAD
-ENTRY(_stext)
-/*
- * Version numbers of the bootinfo interface
- * The area from _stext to _start will later be used as kernel pointer table
- */
-	bras	1f	/* Jump over bootinfo version numbers */
-
-	.long	BOOTINFOV_MAGIC
-	.long	MACH_AMIGA, AMIGA_BOOTI_VERSION
-	.long	MACH_ATARI, ATARI_BOOTI_VERSION
-	.long	MACH_MVME147, MVME147_BOOTI_VERSION
-	.long	MACH_MVME16x, MVME16x_BOOTI_VERSION
-	.long	MACH_BVME6000, BVME6000_BOOTI_VERSION
-	.long	MACH_MAC, MAC_BOOTI_VERSION
-	.long	MACH_Q40, Q40_BOOTI_VERSION
-	.long	MACH_HP300, HP300_BOOTI_VERSION
-	.long	0
-1:	jra	__start
-
-.equ	kernel_pg_dir,_stext
-
-.equ	.,_stext+PAGESIZE
-
-ENTRY(_start)
-	jra	__start
-__INIT
-ENTRY(__start)
-/*
- * Setup initial stack pointer
- */
-	lea	%pc@(_stext),%sp
-
-/*
- * Record the CPU and machine type.
- */
-	get_bi_record	BI_MACHTYPE
-	lea	%pc@(m68k_machtype),%a1
-	movel	%a0@,%a1@
-
-	get_bi_record	BI_FPUTYPE
-	lea	%pc@(m68k_fputype),%a1
-	movel	%a0@,%a1@
-
-	get_bi_record	BI_MMUTYPE
-	lea	%pc@(m68k_mmutype),%a1
-	movel	%a0@,%a1@
-
-	get_bi_record	BI_CPUTYPE
-	lea	%pc@(m68k_cputype),%a1
-	movel	%a0@,%a1@
-
-	leds	0x1
-
-#ifdef CONFIG_MAC
-/*
- * For Macintosh, we need to determine the display parameters early (at least
- * while debugging it).
- */
-
-	is_not_mac(L(test_notmac))
-
-	get_bi_record	BI_MAC_VADDR
-	lea	%pc@(L(mac_videobase)),%a1
-	movel	%a0@,%a1@
-
-	get_bi_record	BI_MAC_VDEPTH
-	lea	%pc@(L(mac_videodepth)),%a1
-	movel	%a0@,%a1@
-
-	get_bi_record	BI_MAC_VDIM
-	lea	%pc@(L(mac_dimensions)),%a1
-	movel	%a0@,%a1@
-
-	get_bi_record	BI_MAC_VROW
-	lea	%pc@(L(mac_rowbytes)),%a1
-	movel	%a0@,%a1@
-
-#ifdef SERIAL_DEBUG
-	get_bi_record	BI_MAC_SCCBASE
-	lea	%pc@(L(mac_sccbase)),%a1
-	movel	%a0@,%a1@
-#endif
-
-#if 0
-	/*
-	 * Clear the screen
-	 */
-	lea	%pc@(L(mac_videobase)),%a0
-	movel	%a0@,%a1
-	lea	%pc@(L(mac_dimensions)),%a0
-	movel	%a0@,%d1
-	swap	%d1		/* #rows is high bytes */
-	andl	#0xFFFF,%d1	/* rows */
-	subl	#10,%d1
-	lea	%pc@(L(mac_rowbytes)),%a0
-loopy2:
-	movel	%a0@,%d0
-	subql	#1,%d0
-loopx2:
-	moveb	#0x55, %a1@+
-	dbra	%d0,loopx2
-	dbra	%d1,loopy2
-#endif
-
-L(test_notmac):
-#endif /* CONFIG_MAC */
-
-
-/*
- * There are ultimately two pieces of information we want for all kinds of
- * processors CpuType and CacheBits.  The CPUTYPE was passed in from booter
- * and is converted here from a booter type definition to a separate bit
- * number which allows for the standard is_0x0 macro tests.
- */
-	movel	%pc@(m68k_cputype),%d0
-	/*
-	 * Assume it's an 030
-	 */
-	clrl	%d1
-
-	/*
-	 * Test the BootInfo cputype for 060
-	 */
-	btst	#CPUB_68060,%d0
-	jeq	1f
-	bset	#CPUTYPE_060,%d1
-	bset	#CPUTYPE_0460,%d1
-	jra	3f
-1:
-	/*
-	 * Test the BootInfo cputype for 040
-	 */
-	btst	#CPUB_68040,%d0
-	jeq	2f
-	bset	#CPUTYPE_040,%d1
-	bset	#CPUTYPE_0460,%d1
-	jra	3f
-2:
-	/*
-	 * Test the BootInfo cputype for 020
-	 */
-	btst	#CPUB_68020,%d0
-	jeq	3f
-	bset	#CPUTYPE_020,%d1
-	jra	3f
-3:
-	/*
-	 * Record the cpu type
-	 */
-	lea	%pc@(L(cputype)),%a0
-	movel	%d1,%a0@
-
-	/*
-	 * NOTE:
-	 *
-	 * Now the macros are valid:
-	 *	is_040_or_060
-	 *	is_not_040_or_060
-	 *	is_040
-	 *	is_060
-	 *	is_not_060
-	 */
-
-	/*
-	 * Determine the cache mode for pages holding MMU tables
-	 * and for supervisor mode, unused for '020 and '030
-	 */
-	clrl	%d0
-	clrl	%d1
-
-	is_not_040_or_060(L(save_cachetype))
-
-	/*
-	 * '040 or '060
-	 * d1 := cacheable write-through
-	 * NOTE: The 68040 manual strongly recommends non-cached for MMU tables,
-	 * but we have been using write-through since at least 2.0.29 so I
-	 * guess it is OK.
-	 */
-#ifdef CONFIG_060_WRITETHROUGH
-	/*
-	 * If this is a 68060 board using drivers with cache coherency
-	 * problems, then supervisor memory accesses need to be write-through
-	 * also; otherwise, we want copyback.
-	 */
-
-	is_not_060(1f)
-	movel	#_PAGE_CACHE040W,%d0
-	jra	L(save_cachetype)
-#endif /* CONFIG_060_WRITETHROUGH */
-1:
-	movew	#_PAGE_CACHE040,%d0
-
-	movel	#_PAGE_CACHE040W,%d1
-
-L(save_cachetype):
-	/* Save cache mode for supervisor mode and page tables
-	 */
-	lea	%pc@(m68k_supervisor_cachemode),%a0
-	movel	%d0,%a0@
-	lea	%pc@(m68k_pgtable_cachemode),%a0
-	movel	%d1,%a0@
-
-/*
- * raise interrupt level
- */
-	movew	#0x2700,%sr
-
-/*
-   If running on an Atari, determine the I/O base of the
-   serial port and test if we are running on a Medusa or Hades.
-   This test is necessary here, because on the Hades the serial
-   port is only accessible in the high I/O memory area.
-
-   The test whether it is a Medusa is done by writing to the byte at
-   phys. 0x0. This should result in a bus error on all other machines.
-
-   ...should, but doesn't. The Afterburner040 for the Falcon has the
-   same behaviour (0x0..0x7 are no ROM shadow). So we have to do
-   another test to distinguish Medusa and AB040. This is a
-   read attempt for 0x00ff82fe phys. that should bus error on a Falcon
-   (+AB040), but is in the range where the Medusa always asserts DTACK.
-
-   The test for the Hades is done by reading address 0xb0000000. This
-   should give a bus error on the Medusa.
- */
-
-#ifdef CONFIG_ATARI
-	is_not_atari(L(notypetest))
-
-	/* get special machine type (Medusa/Hades/AB40) */
-	moveq	#0,%d3 /* default if tag doesn't exist */
-	get_bi_record	BI_ATARI_MCH_TYPE
-	tstl	%d0
-	jbmi	1f
-	movel	%a0@,%d3
-	lea	%pc@(atari_mch_type),%a0
-	movel	%d3,%a0@
-1:
-	/* On the Hades, the iobase must be set up before opening the
-	 * serial port. There are no I/O regs at 0x00ffxxxx at all. */
-	moveq	#0,%d0
-	cmpl	#ATARI_MACH_HADES,%d3
-	jbne	1f
-	movel	#0xff000000,%d0		/* Hades I/O base addr: 0xff000000 */
-1:	lea     %pc@(L(iobase)),%a0
-	movel   %d0,%a0@
-
-L(notypetest):
-#endif
-
-#ifdef CONFIG_VME
-	is_mvme147(L(getvmetype))
-	is_bvme6000(L(getvmetype))
-	is_not_mvme16x(L(gvtdone))
-
-	/* See if the loader has specified the BI_VME_TYPE tag.  Recent
-	 * versions of VMELILO and TFTPLILO do this.  We have to do this
-	 * early so we know how to handle console output.  If the tag
-	 * doesn't exist then we use the Bug for output on MVME16x.
-	 */
-L(getvmetype):
-	get_bi_record	BI_VME_TYPE
-	tstl	%d0
-	jbmi	1f
-	movel	%a0@,%d3
-	lea	%pc@(vme_brdtype),%a0
-	movel	%d3,%a0@
-1:
-#ifdef CONFIG_MVME16x
-	is_not_mvme16x(L(gvtdone))
-
-	/* Need to get the BRD_ID info to differentiate between 162, 167,
-	 * etc.  This is available as a BI_VME_BRDINFO tag with later
-	 * versions of VMELILO and TFTPLILO, otherwise we call the Bug.
-	 */
-	get_bi_record	BI_VME_BRDINFO
-	tstl	%d0
-	jpl	1f
-
-	/* Get pointer to board ID data from Bug */
-	movel	%d2,%sp@-
-	trap	#15
-	.word	0x70		/* trap 0x70 - .BRD_ID */
-	movel	%sp@+,%a0
-1:
-	lea	%pc@(mvme_bdid),%a1
-	/* Structure is 32 bytes long */
-	movel	%a0@+,%a1@+
-	movel	%a0@+,%a1@+
-	movel	%a0@+,%a1@+
-	movel	%a0@+,%a1@+
-	movel	%a0@+,%a1@+
-	movel	%a0@+,%a1@+
-	movel	%a0@+,%a1@+
-	movel	%a0@+,%a1@+
-#endif
-
-L(gvtdone):
-
-#endif
-
-#ifdef CONFIG_HP300
-	is_not_hp300(L(nothp))
-
-	/* Get the address of the UART for serial debugging */
-	get_bi_record	BI_HP300_UART_ADDR
-	tstl	%d0
-	jbmi	1f
-	movel	%a0@,%d3
-	lea	%pc@(L(uartbase)),%a0
-	movel	%d3,%a0@
-	get_bi_record	BI_HP300_UART_SCODE
-	tstl	%d0
-	jbmi	1f
-	movel	%a0@,%d3
-	lea	%pc@(L(uart_scode)),%a0
-	movel	%d3,%a0@
-1:
-L(nothp):
-#endif
-
-/*
- * Initialize serial port
- */
-	jbsr	L(serial_init)
-
-/*
- * Initialize console
- */
-#ifdef CONFIG_MAC
-	is_not_mac(L(nocon))
-#ifdef CONSOLE
-	console_init
-#ifdef CONSOLE_PENGUIN
-	console_put_penguin
-#endif	/* CONSOLE_PENGUIN */
-	console_put_stats
-#endif	/* CONSOLE */
-L(nocon):
-#endif	/* CONFIG_MAC */
-
-
-	putc	'\n'
-	putc	'A'
-	leds	0x2
-	dputn	%pc@(L(cputype))
-	dputn	%pc@(m68k_supervisor_cachemode)
-	dputn	%pc@(m68k_pgtable_cachemode)
-	dputc	'\n'
-
-/*
- * Save physical start address of kernel
- */
-	lea	%pc@(L(phys_kernel_start)),%a0
-	lea	%pc@(_stext),%a1
-	subl	#_stext,%a1
-	addl	#PAGE_OFFSET,%a1
-	movel	%a1,%a0@
-
-	putc	'B'
-
-	leds	0x4
-
-/*
- *	mmu_init
- *
- *	This block of code does what's necessary to map in the various kinds
- *	of machines for execution of Linux.
- *	First map the first 4 MB of kernel code & data
- */
-
-	mmu_map	#PAGE_OFFSET,%pc@(L(phys_kernel_start)),#4*1024*1024,\
-		%pc@(m68k_supervisor_cachemode)
-
-	putc	'C'
-
-#ifdef CONFIG_AMIGA
-
-L(mmu_init_amiga):
-
-	is_not_amiga(L(mmu_init_not_amiga))
-/*
- * mmu_init_amiga
- */
-
-	putc	'D'
-
-	is_not_040_or_060(1f)
-
-	/*
-	 * 040: Map the 16Meg range physical 0x0 up to logical 0x8000.0000
-	 */
-	mmu_map		#0x80000000,#0,#0x01000000,#_PAGE_NOCACHE_S
-	/*
-	 * Map the Zorro III I/O space with transparent translation
-	 * for frame buffer memory etc.
-	 */
-	mmu_map_tt	#1,#0x40000000,#0x20000000,#_PAGE_NOCACHE_S
-
-	jbra	L(mmu_init_done)
-
-1:
-	/*
-	 * 030:	Map the 32Meg range physical 0x0 up to logical 0x8000.0000
-	 */
-	mmu_map		#0x80000000,#0,#0x02000000,#_PAGE_NOCACHE030
-	mmu_map_tt	#1,#0x40000000,#0x20000000,#_PAGE_NOCACHE030
-
-	jbra	L(mmu_init_done)
-
-L(mmu_init_not_amiga):
-#endif
-
-#ifdef CONFIG_ATARI
-
-L(mmu_init_atari):
-
-	is_not_atari(L(mmu_init_not_atari))
-
-	putc	'E'
-
-/* On the Atari, we map the I/O region (phys. 0x00ffxxxx) by mapping
-   the last 16 MB of virtual address space to the first 16 MB (i.e.
-   0xffxxxxxx -> 0x00xxxxxx). For this, an additional pointer table is
-   needed. I/O ranges are marked non-cachable.
-
-   For the Medusa it is better to map the I/O region transparently
-   (i.e. 0xffxxxxxx -> 0xffxxxxxx), because some I/O registers are
-   accessible only in the high area.
-
-   On the Hades all I/O registers are only accessible in the high
-   area.
-*/
-
-	/* I/O base addr for non-Medusa, non-Hades: 0x00000000 */
-	moveq	#0,%d0
-	movel	%pc@(atari_mch_type),%d3
-	cmpl	#ATARI_MACH_MEDUSA,%d3
-	jbeq	2f
-	cmpl	#ATARI_MACH_HADES,%d3
-	jbne	1f
-2:	movel	#0xff000000,%d0 /* Medusa/Hades base addr: 0xff000000 */
-1:	movel	%d0,%d3
-
-	is_040_or_060(L(spata68040))
-
-	/* Map everything non-cacheable, though not all parts really
-	 * need to disable caches (crucial only for 0xff8000..0xffffff
-	 * (standard I/O) and 0xf00000..0xf3ffff (IDE)). The remainder
-	 * isn't really used, except for sometimes peeking into the
-	 * ROMs (mirror at phys. 0x0), so caching isn't necessary for
-	 * this. */
-	mmu_map	#0xff000000,%d3,#0x01000000,#_PAGE_NOCACHE030
-
-	jbra	L(mmu_init_done)
-
-L(spata68040):
-
-	mmu_map	#0xff000000,%d3,#0x01000000,#_PAGE_NOCACHE_S
-
-	jbra	L(mmu_init_done)
-
-L(mmu_init_not_atari):
-#endif
-
-#ifdef CONFIG_Q40
-	is_not_q40(L(notq40))
-	/*
-	 * add transparent mapping for 0xff00 0000 - 0xffff ffff
-	 * non-cached serialized etc..
-	 * this includes master chip, DAC, RTC and ISA ports
-	 * 0xfe000000-0xfeffffff is for screen and ROM
-	 */
-
-	putc    'Q'
-
-	mmu_map_tt	#0,#0xfe000000,#0x01000000,#_PAGE_CACHE040W
-	mmu_map_tt	#1,#0xff000000,#0x01000000,#_PAGE_NOCACHE_S
-
-	jbra	L(mmu_init_done)
-
-L(notq40):
-#endif
-
-#ifdef CONFIG_HP300
-	is_not_hp300(L(nothp300))
-
-	/* On the HP300, we map the ROM, INTIO and DIO regions (phys. 0x00xxxxxx)
-	 * by mapping 32MB (on 020/030) or 16 MB (on 040) from 0xf0xxxxxx -> 0x00xxxxxx).
-	 * The ROM mapping is needed because the LEDs are mapped there too.
-	 */
-
-	is_040(1f)
-
-	/*
-	 * 030: Map the 32Meg range physical 0x0 up to logical 0xf000.0000
-	 */
-	mmu_map	#0xf0000000,#0,#0x02000000,#_PAGE_NOCACHE030
-
-	jbra	L(mmu_init_done)
-
-1:
-	/*
-	 * 040: Map the 16Meg range physical 0x0 up to logical 0xf000.0000
-	 */
-	mmu_map #0xf0000000,#0,#0x01000000,#_PAGE_NOCACHE_S
-
-	jbra	L(mmu_init_done)
-
-L(nothp300):
-#endif /* CONFIG_HP300 */
-
-#ifdef CONFIG_MVME147
-
-	is_not_mvme147(L(not147))
-
-	/*
-	 * On MVME147 we have already created kernel page tables for
-	 * 4MB of RAM at address 0, so now need to do a transparent
-	 * mapping of the top of memory space.  Make it 0.5GByte for now,
-	 * so we can access on-board i/o areas.
-	 */
-
-	mmu_map_tt	#1,#0xe0000000,#0x20000000,#_PAGE_NOCACHE030
-
-	jbra	L(mmu_init_done)
-
-L(not147):
-#endif /* CONFIG_MVME147 */
-
-#ifdef CONFIG_MVME16x
-
-	is_not_mvme16x(L(not16x))
-
-	/*
-	 * On MVME16x we have already created kernel page tables for
-	 * 4MB of RAM at address 0, so now need to do a transparent
-	 * mapping of the top of memory space.  Make it 0.5GByte for now.
-	 * Supervisor only access, so transparent mapping doesn't
-	 * clash with User code virtual address space.
-	 * this covers IO devices, PROM and SRAM.  The PROM and SRAM
-	 * mapping is needed to allow 167Bug to run.
-	 * IO is in the range 0xfff00000 to 0xfffeffff.
-	 * PROM is 0xff800000->0xffbfffff and SRAM is
-	 * 0xffe00000->0xffe1ffff.
-	 */
-
-	mmu_map_tt	#1,#0xe0000000,#0x20000000,#_PAGE_NOCACHE_S
-
-	jbra	L(mmu_init_done)
-
-L(not16x):
-#endif	/* CONFIG_MVME162 | CONFIG_MVME167 */
-
-#ifdef CONFIG_BVME6000
-
-	is_not_bvme6000(L(not6000))
-
-	/*
-	 * On BVME6000 we have already created kernel page tables for
-	 * 4MB of RAM at address 0, so now need to do a transparent
-	 * mapping of the top of memory space.  Make it 0.5GByte for now,
-	 * so we can access on-board i/o areas.
-	 * Supervisor only access, so transparent mapping doesn't
-	 * clash with User code virtual address space.
-	 */
-
-	mmu_map_tt	#1,#0xe0000000,#0x20000000,#_PAGE_NOCACHE_S
-
-	jbra	L(mmu_init_done)
-
-L(not6000):
-#endif /* CONFIG_BVME6000 */
-
-/*
- * mmu_init_mac
- *
- * The Macintosh mappings are less clear.
- *
- * Even as of this writing, it is unclear how the
- * Macintosh mappings will be done.  However, as
- * the first author of this code I'm proposing the
- * following model:
- *
- * Map the kernel (that's already done),
- * Map the I/O (on most machines that's the
- * 0x5000.0000 ... 0x5300.0000 range,
- * Map the video frame buffer using as few pages
- * as absolutely (this requirement mostly stems from
- * the fact that when the frame buffer is at
- * 0x0000.0000 then we know there is valid RAM just
- * above the screen that we don't want to waste!).
- *
- * By the way, if the frame buffer is at 0x0000.0000
- * then the Macintosh is known as an RBV based Mac.
- *
- * By the way 2, the code currently maps in a bunch of
- * regions.  But I'd like to cut that out.  (And move most
- * of the mappings up into the kernel proper ... or only
- * map what's necessary.)
- */
-
-#ifdef CONFIG_MAC
-
-L(mmu_init_mac):
-
-	is_not_mac(L(mmu_init_not_mac))
-
-	putc	'F'
-
-	is_not_040_or_060(1f)
-
-	moveq	#_PAGE_NOCACHE_S,%d3
-	jbra	2f
-1:
-	moveq	#_PAGE_NOCACHE030,%d3
-2:
-	/*
-	 * Mac Note: screen address of logical 0xF000.0000 -> <screen physical>
-	 *	     we simply map the 4MB that contains the videomem
-	 */
-
-	movel	#VIDEOMEMMASK,%d0
-	andl	%pc@(L(mac_videobase)),%d0
-
-	mmu_map		#VIDEOMEMBASE,%d0,#VIDEOMEMSIZE,%d3
-	/* ROM from 4000 0000 to 4200 0000 (only for mac_reset()) */
-	mmu_map_eq	#0x40000000,#0x02000000,%d3
-	/* IO devices (incl. serial port) from 5000 0000 to 5300 0000 */
-	mmu_map_eq	#0x50000000,#0x03000000,%d3
-	/* Nubus slot space (video at 0xF0000000, rom at 0xF0F80000) */
-	mmu_map_tt	#1,#0xf8000000,#0x08000000,%d3
-
-	jbra	L(mmu_init_done)
-
-L(mmu_init_not_mac):
-#endif
-
-#ifdef CONFIG_SUN3X
-	is_not_sun3x(L(notsun3x))
-
-	/* oh, the pain..  We're gonna want the prom code after
-	 * starting the MMU, so we copy the mappings, translating
-	 * from 8k -> 4k pages as we go.
-	 */
-
-	/* copy maps from 0xfee00000 to 0xff000000 */
-	movel	#0xfee00000, %d0
-	moveq	#ROOT_INDEX_SHIFT, %d1
-	lsrl	%d1,%d0
-	mmu_get_root_table_entry	%d0
-
-	movel	#0xfee00000, %d0
-	moveq	#PTR_INDEX_SHIFT, %d1
-	lsrl	%d1,%d0
-	andl	#PTR_TABLE_SIZE-1, %d0
-	mmu_get_ptr_table_entry		%a0,%d0
-
-	movel	#0xfee00000, %d0
-	moveq	#PAGE_INDEX_SHIFT, %d1
-	lsrl	%d1,%d0
-	andl	#PAGE_TABLE_SIZE-1, %d0
-	mmu_get_page_table_entry	%a0,%d0
-
-	/* this is where the prom page table lives */
-	movel	0xfefe00d4, %a1
-	movel	%a1@, %a1
-
-	movel	#((0x200000 >> 13)-1), %d1
-
-1:
-	movel	%a1@+, %d3
-	movel	%d3,%a0@+
-	addl	#0x1000,%d3
-	movel	%d3,%a0@+
-
-	dbra	%d1,1b
-
-	/* setup tt1 for I/O */
-	mmu_map_tt	#1,#0x40000000,#0x40000000,#_PAGE_NOCACHE_S
-	jbra	L(mmu_init_done)
-
-L(notsun3x):
-#endif
-
-#ifdef CONFIG_APOLLO
-	is_not_apollo(L(notapollo))
-
-	putc	'P'
-	mmu_map         #0x80000000,#0,#0x02000000,#_PAGE_NOCACHE030
-
-L(notapollo):
-	jbra	L(mmu_init_done)
-#endif
-
-L(mmu_init_done):
-
-	putc	'G'
-	leds	0x8
-
-/*
- * mmu_fixup
- *
- * On the 040 class machines, all pages that are used for the
- * mmu have to be fixed up. According to Motorola, pages holding mmu
- * tables should be non-cacheable on a '040 and write-through on a
- * '060. But analysis of the reasons for this, and practical
- * experience, showed that write-through also works on a '040.
- *
- * Allocated memory so far goes from kernel_end to memory_start that
- * is used for all kind of tables, for that the cache attributes
- * are now fixed.
- */
-L(mmu_fixup):
-
-	is_not_040_or_060(L(mmu_fixup_done))
-
-#ifdef MMU_NOCACHE_KERNEL
-	jbra	L(mmu_fixup_done)
-#endif
-
-	/* first fix the page at the start of the kernel, that
-	 * contains also kernel_pg_dir.
-	 */
-	movel	%pc@(L(phys_kernel_start)),%d0
-	subl	#PAGE_OFFSET,%d0
-	lea	%pc@(_stext),%a0
-	subl	%d0,%a0
-	mmu_fixup_page_mmu_cache	%a0
-
-	movel	%pc@(L(kernel_end)),%a0
-	subl	%d0,%a0
-	movel	%pc@(L(memory_start)),%a1
-	subl	%d0,%a1
-	bra	2f
-1:
-	mmu_fixup_page_mmu_cache	%a0
-	addw	#PAGESIZE,%a0
-2:
-	cmpl	%a0,%a1
-	jgt	1b
-
-L(mmu_fixup_done):
-
-#ifdef MMU_PRINT
-	mmu_print
-#endif
-
-/*
- * mmu_engage
- *
- * This chunk of code performs the gruesome task of engaging the MMU.
- * The reason its gruesome is because when the MMU becomes engaged it
- * maps logical addresses to physical addresses.  The Program Counter
- * register is then passed through the MMU before the next instruction
- * is fetched (the instruction following the engage MMU instruction).
- * This may mean one of two things:
- * 1. The Program Counter falls within the logical address space of
- *    the kernel of which there are two sub-possibilities:
- *    A. The PC maps to the correct instruction (logical PC == physical
- *       code location), or
- *    B. The PC does not map through and the processor will read some
- *       data (or instruction) which is not the logically next instr.
- *    As you can imagine, A is good and B is bad.
- * Alternatively,
- * 2. The Program Counter does not map through the MMU.  The processor
- *    will take a Bus Error.
- * Clearly, 2 is bad.
- * It doesn't take a wiz kid to figure you want 1.A.
- * This code creates that possibility.
- * There are two possible 1.A. states (we now ignore the other above states):
- * A. The kernel is located at physical memory addressed the same as
- *    the logical memory for the kernel, i.e., 0x01000.
- * B. The kernel is located some where else.  e.g., 0x0400.0000
- *
- *    Under some conditions the Macintosh can look like A or B.
- * [A friend and I once noted that Apple hardware engineers should be
- * wacked twice each day: once when they show up at work (as in, Whack!,
- * "This is for the screwy hardware we know you're going to design today."),
- * and also at the end of the day (as in, Whack! "I don't know what
- * you designed today, but I'm sure it wasn't good."). -- rst]
- *
- * This code works on the following premise:
- * If the kernel start (%d5) is within the first 16 Meg of RAM,
- * then create a mapping for the kernel at logical 0x8000.0000 to
- * the physical location of the pc.  And, create a transparent
- * translation register for the first 16 Meg.  Then, after the MMU
- * is engaged, the PC can be moved up into the 0x8000.0000 range
- * and then the transparent translation can be turned off and then
- * the PC can jump to the correct logical location and it will be
- * home (finally).  This is essentially the code that the Amiga used
- * to use.  Now, it's generalized for all processors.  Which means
- * that a fresh (but temporary) mapping has to be created.  The mapping
- * is made in page 0 (an as of yet unused location -- except for the
- * stack!).  This temporary mapping will only require 1 pointer table
- * and a single page table (it can map 256K).
- *
- * OK, alternatively, imagine that the Program Counter is not within
- * the first 16 Meg.  Then, just use Transparent Translation registers
- * to do the right thing.
- *
- * Last, if _start is already at 0x01000, then there's nothing special
- * to do (in other words, in a degenerate case of the first case above,
- * do nothing).
- *
- * Let's do it.
- *
- *
- */
-
-	putc	'H'
-
-	mmu_engage
-
-/*
- * After this point no new memory is allocated and
- * the start of available memory is stored in availmem.
- * (The bootmem allocator requires now the physicall address.)
- */
-
-	movel	L(memory_start),availmem
-
-#ifdef CONFIG_AMIGA
-	is_not_amiga(1f)
-	/* fixup the Amiga custom register location before printing */
-	clrl	L(custom)
-1:
-#endif
-
-#ifdef CONFIG_ATARI
-	is_not_atari(1f)
-	/* fixup the Atari iobase register location before printing */
-	movel	#0xff000000,L(iobase)
-1:
-#endif
-
-#ifdef CONFIG_MAC
-	is_not_mac(1f)
-	movel	#~VIDEOMEMMASK,%d0
-	andl	L(mac_videobase),%d0
-	addl	#VIDEOMEMBASE,%d0
-	movel	%d0,L(mac_videobase)
-#if defined(CONSOLE)
-	movel	%pc@(L(phys_kernel_start)),%d0
-	subl	#PAGE_OFFSET,%d0
-	subl	%d0,L(console_font)
-	subl	%d0,L(console_font_data)
-#endif
-#ifdef SERIAL_DEBUG
-	orl	#0x50000000,L(mac_sccbase)
-#endif
-1:
-#endif
-
-#ifdef CONFIG_HP300
-	is_not_hp300(2f)
-	/*
-	 * Fix up the iobase register to point to the new location of the LEDs.
-	 */
-	movel	#0xf0000000,L(iobase)
-
-	/*
-	 * Energise the FPU and caches.
-	 */
-	is_040(1f)
-	movel	#0x60,0xf05f400c
-	jbra	2f
-
-	/*
-	 * 040: slightly different, apparently.
-	 */
-1:	movew	#0,0xf05f400e
-	movew	#0x64,0xf05f400e
-2:
-#endif
-
-#ifdef CONFIG_SUN3X
-	is_not_sun3x(1f)
-
-	/* enable copro */
-	oriw	#0x4000,0x61000000
-1:
-#endif
-
-#ifdef CONFIG_APOLLO
-	is_not_apollo(1f)
-
-	/*
-	 * Fix up the iobase before printing
-	 */
-	movel	#0x80000000,L(iobase)
-1:
-#endif
-
-	putc	'I'
-	leds	0x10
-
-/*
- * Enable caches
- */
-
-	is_not_040_or_060(L(cache_not_680460))
-
-L(cache680460):
-	.chip	68040
-	nop
-	cpusha	%bc
-	nop
-
-	is_060(L(cache68060))
-
-	movel	#CC6_ENABLE_D+CC6_ENABLE_I,%d0
-	/* MMU stuff works in copyback mode now, so enable the cache */
-	movec	%d0,%cacr
-	jra	L(cache_done)
-
-L(cache68060):
-	movel	#CC6_ENABLE_D+CC6_ENABLE_I+CC6_ENABLE_SB+CC6_PUSH_DPI+CC6_ENABLE_B+CC6_CLRA_B,%d0
-	/* MMU stuff works in copyback mode now, so enable the cache */
-	movec	%d0,%cacr
-	/* enable superscalar dispatch in PCR */
-	moveq	#1,%d0
-	.chip	68060
-	movec	%d0,%pcr
-
-	jbra	L(cache_done)
-L(cache_not_680460):
-L(cache68030):
-	.chip	68030
-	movel	#CC3_ENABLE_DB+CC3_CLR_D+CC3_ENABLE_D+CC3_ENABLE_IB+CC3_CLR_I+CC3_ENABLE_I,%d0
-	movec	%d0,%cacr
-
-	jra	L(cache_done)
-	.chip	68k
-L(cache_done):
-
-	putc	'J'
-
-/*
- * Setup initial stack pointer
- */
-	lea	init_task,%curptr
-	lea	init_thread_union+THREAD_SIZE,%sp
-
-	putc	'K'
-
-	subl	%a6,%a6		/* clear a6 for gdb */
-
-/*
- * The new 64bit printf support requires an early exception initialization.
- */
-	jbsr	base_trap_init
-
-/* jump to the kernel start */
-
-	putc	'\n'
-	leds	0x55
-
-	jbsr	start_kernel
-
-/*
- * Find a tag record in the bootinfo structure
- * The bootinfo structure is located right after the kernel bss
- * Returns: d0: size (-1 if not found)
- *          a0: data pointer (end-of-records if not found)
- */
-func_start	get_bi_record,%d1
-
-	movel	ARG1,%d0
-	lea	%pc@(_end),%a0
-1:	tstw	%a0@(BIR_TAG)
-	jeq	3f
-	cmpw	%a0@(BIR_TAG),%d0
-	jeq	2f
-	addw	%a0@(BIR_SIZE),%a0
-	jra	1b
-2:	moveq	#0,%d0
-	movew	%a0@(BIR_SIZE),%d0
-	lea	%a0@(BIR_DATA),%a0
-	jra	4f
-3:	moveq	#-1,%d0
-	lea	%a0@(BIR_SIZE),%a0
-4:
-func_return	get_bi_record
-
-
-/*
- *	MMU Initialization Begins Here
- *
- *	The structure of the MMU tables on the 68k machines
- *	is thus:
- *	Root Table
- *		Logical addresses are translated through
- *	a hierarchical translation mechanism where the high-order
- *	seven bits of the logical address (LA) are used as an
- *	index into the "root table."  Each entry in the root
- *	table has a bit which specifies if it's a valid pointer to a
- *	pointer table.  Each entry defines a 32KMeg range of memory.
- *	If an entry is invalid then that logical range of 32M is
- *	invalid and references to that range of memory (when the MMU
- *	is enabled) will fault.  If the entry is valid, then it does
- *	one of two things.  On 040/060 class machines, it points to
- *	a pointer table which then describes more finely the memory
- *	within that 32M range.  On 020/030 class machines, a technique
- *	called "early terminating descriptors" are used.  This technique
- *	allows an entire 32Meg to be described by a single entry in the
- *	root table.  Thus, this entry in the root table, contains the
- *	physical address of the memory or I/O at the logical address
- *	which the entry represents and it also contains the necessary
- *	cache bits for this region.
- *
- *	Pointer Tables
- *		Per the Root Table, there will be one or more
- *	pointer tables.  Each pointer table defines a 32M range.
- *	Not all of the 32M range need be defined.  Again, the next
- *	seven bits of the logical address are used an index into
- *	the pointer table to point to page tables (if the pointer
- *	is valid).  There will undoubtedly be more than one
- *	pointer table for the kernel because each pointer table
- *	defines a range of only 32M.  Valid pointer table entries
- *	point to page tables, or are early terminating entries
- *	themselves.
- *
- *	Page Tables
- *		Per the Pointer Tables, each page table entry points
- *	to the physical page in memory that supports the logical
- *	address that translates to the particular index.
- *
- *	In short, the Logical Address gets translated as follows:
- *		bits 31..26 - index into the Root Table
- *		bits 25..18 - index into the Pointer Table
- *		bits 17..12 - index into the Page Table
- *		bits 11..0  - offset into a particular 4K page
- *
- *	The algorithms which follows do one thing: they abstract
- *	the MMU hardware.  For example, there are three kinds of
- *	cache settings that are relevant.  Either, memory is
- *	being mapped in which case it is either Kernel Code (or
- *	the RamDisk) or it is MMU data.  On the 030, the MMU data
- *	option also describes the kernel.  Or, I/O is being mapped
- *	in which case it has its own kind of cache bits.  There
- *	are constants which abstract these notions from the code that
- *	actually makes the call to map some range of memory.
- *
- *
- *
- */
-
-#ifdef MMU_PRINT
-/*
- *	mmu_print
- *
- *	This algorithm will print out the current MMU mappings.
- *
- *	Input:
- *		%a5 points to the root table.  Everything else is calculated
- *			from this.
- */
-
-#define mmu_next_valid		0
-#define mmu_start_logical	4
-#define mmu_next_logical	8
-#define mmu_start_physical	12
-#define mmu_next_physical	16
-
-#define MMU_PRINT_INVALID		-1
-#define MMU_PRINT_VALID			1
-#define MMU_PRINT_UNINITED		0
-
-#define putZc(z,n)		jbne 1f; putc z; jbra 2f; 1: putc n; 2:
-
-func_start	mmu_print,%a0-%a6/%d0-%d7
-
-	movel	%pc@(L(kernel_pgdir_ptr)),%a5
-	lea	%pc@(L(mmu_print_data)),%a0
-	movel	#MMU_PRINT_UNINITED,%a0@(mmu_next_valid)
-
-	is_not_040_or_060(mmu_030_print)
-
-mmu_040_print:
-	puts	"\nMMU040\n"
-	puts	"rp:"
-	putn	%a5
-	putc	'\n'
-#if 0
-	/*
-	 * The following #if/#endif block is a tight algorithm for dumping the 040
-	 * MMU Map in gory detail.  It really isn't that practical unless the
-	 * MMU Map algorithm appears to go awry and you need to debug it at the
-	 * entry per entry level.
-	 */
-	movel	#ROOT_TABLE_SIZE,%d5
-#if 0
-	movel	%a5@+,%d7		| Burn an entry to skip the kernel mappings,
-	subql	#1,%d5			| they (might) work
-#endif
-1:	tstl	%d5
-	jbeq	mmu_print_done
-	subq	#1,%d5
-	movel	%a5@+,%d7
-	btst	#1,%d7
-	jbeq	1b
-
-2:	putn	%d7
-	andil	#0xFFFFFE00,%d7
-	movel	%d7,%a4
-	movel	#PTR_TABLE_SIZE,%d4
-	putc	' '
-3:	tstl	%d4
-	jbeq	11f
-	subq	#1,%d4
-	movel	%a4@+,%d7
-	btst	#1,%d7
-	jbeq	3b
-
-4:	putn	%d7
-	andil	#0xFFFFFF00,%d7
-	movel	%d7,%a3
-	movel	#PAGE_TABLE_SIZE,%d3
-5:	movel	#8,%d2
-6:	tstl	%d3
-	jbeq	31f
-	subq	#1,%d3
-	movel	%a3@+,%d6
-	btst	#0,%d6
-	jbeq	6b
-7:	tstl	%d2
-	jbeq	8f
-	subq	#1,%d2
-	putc	' '
-	jbra	91f
-8:	putc	'\n'
-	movel	#8+1+8+1+1,%d2
-9:	putc	' '
-	dbra	%d2,9b
-	movel	#7,%d2
-91:	putn	%d6
-	jbra	6b
-
-31:	putc	'\n'
-	movel	#8+1,%d2
-32:	putc	' '
-	dbra	%d2,32b
-	jbra	3b
-
-11:	putc	'\n'
-	jbra	1b
-#endif /* MMU 040 Dumping code that's gory and detailed */
-
-	lea	%pc@(kernel_pg_dir),%a5
-	movel	%a5,%a0			/* a0 has the address of the root table ptr */
-	movel	#0x00000000,%a4		/* logical address */
-	moveql	#0,%d0
-40:
-	/* Increment the logical address and preserve in d5 */
-	movel	%a4,%d5
-	addil	#PAGESIZE<<13,%d5
-	movel	%a0@+,%d6
-	btst	#1,%d6
-	jbne	41f
-	jbsr	mmu_print_tuple_invalidate
-	jbra	48f
-41:
-	movel	#0,%d1
-	andil	#0xfffffe00,%d6
-	movel	%d6,%a1
-42:
-	movel	%a4,%d5
-	addil	#PAGESIZE<<6,%d5
-	movel	%a1@+,%d6
-	btst	#1,%d6
-	jbne	43f
-	jbsr	mmu_print_tuple_invalidate
-	jbra	47f
-43:
-	movel	#0,%d2
-	andil	#0xffffff00,%d6
-	movel	%d6,%a2
-44:
-	movel	%a4,%d5
-	addil	#PAGESIZE,%d5
-	movel	%a2@+,%d6
-	btst	#0,%d6
-	jbne	45f
-	jbsr	mmu_print_tuple_invalidate
-	jbra	46f
-45:
-	moveml	%d0-%d1,%sp@-
-	movel	%a4,%d0
-	movel	%d6,%d1
-	andil	#0xfffff4e0,%d1
-	lea	%pc@(mmu_040_print_flags),%a6
-	jbsr	mmu_print_tuple
-	moveml	%sp@+,%d0-%d1
-46:
-	movel	%d5,%a4
-	addq	#1,%d2
-	cmpib	#64,%d2
-	jbne	44b
-47:
-	movel	%d5,%a4
-	addq	#1,%d1
-	cmpib	#128,%d1
-	jbne	42b
-48:
-	movel	%d5,%a4			/* move to the next logical address */
-	addq	#1,%d0
-	cmpib	#128,%d0
-	jbne	40b
-
-	.chip	68040
-	movec	%dtt1,%d0
-	movel	%d0,%d1
-	andiw	#0x8000,%d1		/* is it valid ? */
-	jbeq	1f			/* No, bail out */
-
-	movel	%d0,%d1
-	andil	#0xff000000,%d1		/* Get the address */
-	putn	%d1
-	puts	"=="
-	putn	%d1
-
-	movel	%d0,%d6
-	jbsr	mmu_040_print_flags_tt
-1:
-	movec	%dtt0,%d0
-	movel	%d0,%d1
-	andiw	#0x8000,%d1		/* is it valid ? */
-	jbeq	1f			/* No, bail out */
-
-	movel	%d0,%d1
-	andil	#0xff000000,%d1		/* Get the address */
-	putn	%d1
-	puts	"=="
-	putn	%d1
-
-	movel	%d0,%d6
-	jbsr	mmu_040_print_flags_tt
-1:
-	.chip	68k
-
-	jbra	mmu_print_done
-
-mmu_040_print_flags:
-	btstl	#10,%d6
-	putZc(' ','G')	/* global bit */
-	btstl	#7,%d6
-	putZc(' ','S')	/* supervisor bit */
-mmu_040_print_flags_tt:
-	btstl	#6,%d6
-	jbne	3f
-	putc	'C'
-	btstl	#5,%d6
-	putZc('w','c')	/* write through or copy-back */
-	jbra	4f
-3:
-	putc	'N'
-	btstl	#5,%d6
-	putZc('s',' ')	/* serialized non-cacheable, or non-cacheable */
-4:
-	rts
-
-mmu_030_print_flags:
-	btstl	#6,%d6
-	putZc('C','I')	/* write through or copy-back */
-	rts
-
-mmu_030_print:
-	puts	"\nMMU030\n"
-	puts	"\nrp:"
-	putn	%a5
-	putc	'\n'
-	movel	%a5,%d0
-	andil	#0xfffffff0,%d0
-	movel	%d0,%a0
-	movel	#0x00000000,%a4		/* logical address */
-	movel	#0,%d0
-30:
-	movel	%a4,%d5
-	addil	#PAGESIZE<<13,%d5
-	movel	%a0@+,%d6
-	btst	#1,%d6			/* is it a table ptr? */
-	jbne	31f			/* yes */
-	btst	#0,%d6			/* is it early terminating? */
-	jbeq	1f			/* no */
-	jbsr	mmu_030_print_helper
-	jbra	38f
-1:
-	jbsr	mmu_print_tuple_invalidate
-	jbra	38f
-31:
-	movel	#0,%d1
-	andil	#0xfffffff0,%d6
-	movel	%d6,%a1
-32:
-	movel	%a4,%d5
-	addil	#PAGESIZE<<6,%d5
-	movel	%a1@+,%d6
-	btst	#1,%d6			/* is it a table ptr? */
-	jbne	33f			/* yes */
-	btst	#0,%d6			/* is it a page descriptor? */
-	jbeq	1f			/* no */
-	jbsr	mmu_030_print_helper
-	jbra	37f
-1:
-	jbsr	mmu_print_tuple_invalidate
-	jbra	37f
-33:
-	movel	#0,%d2
-	andil	#0xfffffff0,%d6
-	movel	%d6,%a2
-34:
-	movel	%a4,%d5
-	addil	#PAGESIZE,%d5
-	movel	%a2@+,%d6
-	btst	#0,%d6
-	jbne	35f
-	jbsr	mmu_print_tuple_invalidate
-	jbra	36f
-35:
-	jbsr	mmu_030_print_helper
-36:
-	movel	%d5,%a4
-	addq	#1,%d2
-	cmpib	#64,%d2
-	jbne	34b
-37:
-	movel	%d5,%a4
-	addq	#1,%d1
-	cmpib	#128,%d1
-	jbne	32b
-38:
-	movel	%d5,%a4			/* move to the next logical address */
-	addq	#1,%d0
-	cmpib	#128,%d0
-	jbne	30b
-
-mmu_print_done:
-	puts	"\n"
-
-func_return	mmu_print
-
-
-mmu_030_print_helper:
-	moveml	%d0-%d1,%sp@-
-	movel	%a4,%d0
-	movel	%d6,%d1
-	lea	%pc@(mmu_030_print_flags),%a6
-	jbsr	mmu_print_tuple
-	moveml	%sp@+,%d0-%d1
-	rts
-
-mmu_print_tuple_invalidate:
-	moveml	%a0/%d7,%sp@-
-
-	lea	%pc@(L(mmu_print_data)),%a0
-	tstl	%a0@(mmu_next_valid)
-	jbmi	mmu_print_tuple_invalidate_exit
-
-	movel	#MMU_PRINT_INVALID,%a0@(mmu_next_valid)
-
-	putn	%a4
-
-	puts	"##\n"
-
-mmu_print_tuple_invalidate_exit:
-	moveml	%sp@+,%a0/%d7
-	rts
-
-
-mmu_print_tuple:
-	moveml	%d0-%d7/%a0,%sp@-
-
-	lea	%pc@(L(mmu_print_data)),%a0
-
-	tstl	%a0@(mmu_next_valid)
-	jble	mmu_print_tuple_print
-
-	cmpl	%a0@(mmu_next_physical),%d1
-	jbeq	mmu_print_tuple_increment
-
-mmu_print_tuple_print:
-	putn	%d0
-	puts	"->"
-	putn	%d1
-
-	movel	%d1,%d6
-	jbsr	%a6@
-
-mmu_print_tuple_record:
-	movel	#MMU_PRINT_VALID,%a0@(mmu_next_valid)
-
-	movel	%d1,%a0@(mmu_next_physical)
-
-mmu_print_tuple_increment:
-	movel	%d5,%d7
-	subl	%a4,%d7
-	addl	%d7,%a0@(mmu_next_physical)
-
-mmu_print_tuple_exit:
-	moveml	%sp@+,%d0-%d7/%a0
-	rts
-
-mmu_print_machine_cpu_types:
-	puts	"machine: "
-
-	is_not_amiga(1f)
-	puts	"amiga"
-	jbra	9f
-1:
-	is_not_atari(2f)
-	puts	"atari"
-	jbra	9f
-2:
-	is_not_mac(3f)
-	puts	"macintosh"
-	jbra	9f
-3:	puts	"unknown"
-9:	putc	'\n'
-
-	puts	"cputype: 0"
-	is_not_060(1f)
-	putc	'6'
-	jbra	9f
-1:
-	is_not_040_or_060(2f)
-	putc	'4'
-	jbra	9f
-2:	putc	'3'
-9:	putc	'0'
-	putc	'\n'
-
-	rts
-#endif /* MMU_PRINT */
-
-/*
- * mmu_map_tt
- *
- * This is a specific function which works on all 680x0 machines.
- * On 030, 040 & 060 it will attempt to use Transparent Translation
- * registers (tt1).
- * On 020 it will call the standard mmu_map which will use early
- * terminating descriptors.
- */
-func_start	mmu_map_tt,%d0/%d1/%a0,4
-
-	dputs	"mmu_map_tt:"
-	dputn	ARG1
-	dputn	ARG2
-	dputn	ARG3
-	dputn	ARG4
-	dputc	'\n'
-
-	is_020(L(do_map))
-
-	/* Extract the highest bit set
-	 */
-	bfffo	ARG3{#0,#32},%d1
-	cmpw	#8,%d1
-	jcc	L(do_map)
-
-	/* And get the mask
-	 */
-	moveq	#-1,%d0
-	lsrl	%d1,%d0
-	lsrl	#1,%d0
-
-	/* Mask the address
-	 */
-	movel	%d0,%d1
-	notl	%d1
-	andl	ARG2,%d1
-
-	/* Generate the upper 16bit of the tt register
-	 */
-	lsrl	#8,%d0
-	orl	%d0,%d1
-	clrw	%d1
-
-	is_040_or_060(L(mmu_map_tt_040))
-
-	/* set 030 specific bits (read/write access for supervisor mode
-	 * (highest function code set, lower two bits masked))
-	 */
-	orw	#TTR_ENABLE+TTR_RWM+TTR_FCB2+TTR_FCM1+TTR_FCM0,%d1
-	movel	ARG4,%d0
-	btst	#6,%d0
-	jeq	1f
-	orw	#TTR_CI,%d1
-
-1:	lea	STACK,%a0
-	dputn	%d1
-	movel	%d1,%a0@
-	.chip	68030
-	tstl	ARG1
-	jne	1f
-	pmove	%a0@,%tt0
-	jra	2f
-1:	pmove	%a0@,%tt1
-2:	.chip	68k
-	jra	L(mmu_map_tt_done)
-
-	/* set 040 specific bits
-	 */
-L(mmu_map_tt_040):
-	orw	#TTR_ENABLE+TTR_KERNELMODE,%d1
-	orl	ARG4,%d1
-	dputn	%d1
-
-	.chip	68040
-	tstl	ARG1
-	jne	1f
-	movec	%d1,%itt0
-	movec	%d1,%dtt0
-	jra	2f
-1:	movec	%d1,%itt1
-	movec	%d1,%dtt1
-2:	.chip	68k
-
-	jra	L(mmu_map_tt_done)
-
-L(do_map):
-	mmu_map_eq	ARG2,ARG3,ARG4
-
-L(mmu_map_tt_done):
-
-func_return	mmu_map_tt
-
-/*
- *	mmu_map
- *
- *	This routine will map a range of memory using a pointer
- *	table and allocating the pages on the fly from the kernel.
- *	The pointer table does not have to be already linked into
- *	the root table, this routine will do that if necessary.
- *
- *	NOTE
- *	This routine will assert failure and use the serial_putc
- *	routines in the case of a run-time error.  For example,
- *	if the address is already mapped.
- *
- *	NOTE-2
- *	This routine will use early terminating descriptors
- *	where possible for the 68020+68851 and 68030 type
- *	processors.
- */
-func_start	mmu_map,%d0-%d4/%a0-%a4
-
-	dputs	"\nmmu_map:"
-	dputn	ARG1
-	dputn	ARG2
-	dputn	ARG3
-	dputn	ARG4
-	dputc	'\n'
-
-	/* Get logical address and round it down to 256KB
-	 */
-	movel	ARG1,%d0
-	andl	#-(PAGESIZE*PAGE_TABLE_SIZE),%d0
-	movel	%d0,%a3
-
-	/* Get the end address
-	 */
-	movel	ARG1,%a4
-	addl	ARG3,%a4
-	subql	#1,%a4
-
-	/* Get physical address and round it down to 256KB
-	 */
-	movel	ARG2,%d0
-	andl	#-(PAGESIZE*PAGE_TABLE_SIZE),%d0
-	movel	%d0,%a2
-
-	/* Add page attributes to the physical address
-	 */
-	movel	ARG4,%d0
-	orw	#_PAGE_PRESENT+_PAGE_ACCESSED+_PAGE_DIRTY,%d0
-	addw	%d0,%a2
-
-	dputn	%a2
-	dputn	%a3
-	dputn	%a4
-
-	is_not_040_or_060(L(mmu_map_030))
-
-	addw	#_PAGE_GLOBAL040,%a2
-/*
- *	MMU 040 & 060 Support
- *
- *	The MMU usage for the 040 and 060 is different enough from
- *	the 030 and 68851 that there is separate code.  This comment
- *	block describes the data structures and algorithms built by
- *	this code.
- *
- *	The 040 does not support early terminating descriptors, as
- *	the 030 does.  Therefore, a third level of table is needed
- *	for the 040, and that would be the page table.  In Linux,
- *	page tables are allocated directly from the memory above the
- *	kernel.
- *
- */
-
-L(mmu_map_040):
-	/* Calculate the offset into the root table
-	 */
-	movel	%a3,%d0
-	moveq	#ROOT_INDEX_SHIFT,%d1
-	lsrl	%d1,%d0
-	mmu_get_root_table_entry	%d0
-
-	/* Calculate the offset into the pointer table
-	 */
-	movel	%a3,%d0
-	moveq	#PTR_INDEX_SHIFT,%d1
-	lsrl	%d1,%d0
-	andl	#PTR_TABLE_SIZE-1,%d0
-	mmu_get_ptr_table_entry		%a0,%d0
-
-	/* Calculate the offset into the page table
-	 */
-	movel	%a3,%d0
-	moveq	#PAGE_INDEX_SHIFT,%d1
-	lsrl	%d1,%d0
-	andl	#PAGE_TABLE_SIZE-1,%d0
-	mmu_get_page_table_entry	%a0,%d0
-
-	/* The page table entry must not no be busy
-	 */
-	tstl	%a0@
-	jne	L(mmu_map_error)
-
-	/* Do the mapping and advance the pointers
-	 */
-	movel	%a2,%a0@
-2:
-	addw	#PAGESIZE,%a2
-	addw	#PAGESIZE,%a3
-
-	/* Ready with mapping?
-	 */
-	lea	%a3@(-1),%a0
-	cmpl	%a0,%a4
-	jhi	L(mmu_map_040)
-	jra	L(mmu_map_done)
-
-L(mmu_map_030):
-	/* Calculate the offset into the root table
-	 */
-	movel	%a3,%d0
-	moveq	#ROOT_INDEX_SHIFT,%d1
-	lsrl	%d1,%d0
-	mmu_get_root_table_entry	%d0
-
-	/* Check if logical address 32MB aligned,
-	 * so we can try to map it once
-	 */
-	movel	%a3,%d0
-	andl	#(PTR_TABLE_SIZE*PAGE_TABLE_SIZE*PAGESIZE-1)&(-ROOT_TABLE_SIZE),%d0
-	jne	1f
-
-	/* Is there enough to map for 32MB at once
-	 */
-	lea	%a3@(PTR_TABLE_SIZE*PAGE_TABLE_SIZE*PAGESIZE-1),%a1
-	cmpl	%a1,%a4
-	jcs	1f
-
-	addql	#1,%a1
-
-	/* The root table entry must not no be busy
-	 */
-	tstl	%a0@
-	jne	L(mmu_map_error)
-
-	/* Do the mapping and advance the pointers
-	 */
-	dputs	"early term1"
-	dputn	%a2
-	dputn	%a3
-	dputn	%a1
-	dputc	'\n'
-	movel	%a2,%a0@
-
-	movel	%a1,%a3
-	lea	%a2@(PTR_TABLE_SIZE*PAGE_TABLE_SIZE*PAGESIZE),%a2
-	jra	L(mmu_mapnext_030)
-1:
-	/* Calculate the offset into the pointer table
-	 */
-	movel	%a3,%d0
-	moveq	#PTR_INDEX_SHIFT,%d1
-	lsrl	%d1,%d0
-	andl	#PTR_TABLE_SIZE-1,%d0
-	mmu_get_ptr_table_entry		%a0,%d0
-
-	/* The pointer table entry must not no be busy
-	 */
-	tstl	%a0@
-	jne	L(mmu_map_error)
-
-	/* Do the mapping and advance the pointers
-	 */
-	dputs	"early term2"
-	dputn	%a2
-	dputn	%a3
-	dputc	'\n'
-	movel	%a2,%a0@
-
-	addl	#PAGE_TABLE_SIZE*PAGESIZE,%a2
-	addl	#PAGE_TABLE_SIZE*PAGESIZE,%a3
-
-L(mmu_mapnext_030):
-	/* Ready with mapping?
-	 */
-	lea	%a3@(-1),%a0
-	cmpl	%a0,%a4
-	jhi	L(mmu_map_030)
-	jra	L(mmu_map_done)
-
-L(mmu_map_error):
-
-	dputs	"mmu_map error:"
-	dputn	%a2
-	dputn	%a3
-	dputc	'\n'
-
-L(mmu_map_done):
-
-func_return	mmu_map
-
-/*
- *	mmu_fixup
- *
- *	On the 040 class machines, all pages that are used for the
- *	mmu have to be fixed up.
- */
-
-func_start	mmu_fixup_page_mmu_cache,%d0/%a0
-
-	dputs	"mmu_fixup_page_mmu_cache"
-	dputn	ARG1
-
-	/* Calculate the offset into the root table
-	 */
-	movel	ARG1,%d0
-	moveq	#ROOT_INDEX_SHIFT,%d1
-	lsrl	%d1,%d0
-	mmu_get_root_table_entry	%d0
-
-	/* Calculate the offset into the pointer table
-	 */
-	movel	ARG1,%d0
-	moveq	#PTR_INDEX_SHIFT,%d1
-	lsrl	%d1,%d0
-	andl	#PTR_TABLE_SIZE-1,%d0
-	mmu_get_ptr_table_entry		%a0,%d0
-
-	/* Calculate the offset into the page table
-	 */
-	movel	ARG1,%d0
-	moveq	#PAGE_INDEX_SHIFT,%d1
-	lsrl	%d1,%d0
-	andl	#PAGE_TABLE_SIZE-1,%d0
-	mmu_get_page_table_entry	%a0,%d0
-
-	movel	%a0@,%d0
-	andil	#_CACHEMASK040,%d0
-	orl	%pc@(m68k_pgtable_cachemode),%d0
-	movel	%d0,%a0@
-
-	dputc	'\n'
-
-func_return	mmu_fixup_page_mmu_cache
-
-/*
- *	mmu_temp_map
- *
- *	create a temporary mapping to enable the mmu,
- *	this we don't need any transparation translation tricks.
- */
-
-func_start	mmu_temp_map,%d0/%d1/%a0/%a1
-
-	dputs	"mmu_temp_map"
-	dputn	ARG1
-	dputn	ARG2
-	dputc	'\n'
-
-	lea	%pc@(L(temp_mmap_mem)),%a1
-
-	/* Calculate the offset in the root table
-	 */
-	movel	ARG2,%d0
-	moveq	#ROOT_INDEX_SHIFT,%d1
-	lsrl	%d1,%d0
-	mmu_get_root_table_entry	%d0
-
-	/* Check if the table is temporary allocated, so we have to reuse it
-	 */
-	movel	%a0@,%d0
-	cmpl	%pc@(L(memory_start)),%d0
-	jcc	1f
-
-	/* Temporary allocate a ptr table and insert it into the root table
-	 */
-	movel	%a1@,%d0
-	addl	#PTR_TABLE_SIZE*4,%a1@
-	orw	#_PAGE_TABLE+_PAGE_ACCESSED,%d0
-	movel	%d0,%a0@
-	dputs	" (new)"
-1:
-	dputn	%d0
-	/* Mask the root table entry for the ptr table
-	 */
-	andw	#-ROOT_TABLE_SIZE,%d0
-	movel	%d0,%a0
-
-	/* Calculate the offset into the pointer table
-	 */
-	movel	ARG2,%d0
-	moveq	#PTR_INDEX_SHIFT,%d1
-	lsrl	%d1,%d0
-	andl	#PTR_TABLE_SIZE-1,%d0
-	lea	%a0@(%d0*4),%a0
-	dputn	%a0
-
-	/* Check if a temporary page table is already allocated
-	 */
-	movel	%a0@,%d0
-	jne	1f
-
-	/* Temporary allocate a page table and insert it into the ptr table
-	 */
-	movel	%a1@,%d0
-	/* The 512 should be PAGE_TABLE_SIZE*4, but that violates the
-	   alignment restriction for pointer tables on the '0[46]0.  */
-	addl	#512,%a1@
-	orw	#_PAGE_TABLE+_PAGE_ACCESSED,%d0
-	movel	%d0,%a0@
-	dputs	" (new)"
-1:
-	dputn	%d0
-	/* Mask the ptr table entry for the page table
-	 */
-	andw	#-PTR_TABLE_SIZE,%d0
-	movel	%d0,%a0
-
-	/* Calculate the offset into the page table
-	 */
-	movel	ARG2,%d0
-	moveq	#PAGE_INDEX_SHIFT,%d1
-	lsrl	%d1,%d0
-	andl	#PAGE_TABLE_SIZE-1,%d0
-	lea	%a0@(%d0*4),%a0
-	dputn	%a0
-
-	/* Insert the address into the page table
-	 */
-	movel	ARG1,%d0
-	andw	#-PAGESIZE,%d0
-	orw	#_PAGE_PRESENT+_PAGE_ACCESSED+_PAGE_DIRTY,%d0
-	movel	%d0,%a0@
-	dputn	%d0
-
-	dputc	'\n'
-
-func_return	mmu_temp_map
-
-func_start	mmu_engage,%d0-%d2/%a0-%a3
-
-	moveq	#ROOT_TABLE_SIZE-1,%d0
-	/* Temporarily use a different root table.  */
-	lea	%pc@(L(kernel_pgdir_ptr)),%a0
-	movel	%a0@,%a2
-	movel	%pc@(L(memory_start)),%a1
-	movel	%a1,%a0@
-	movel	%a2,%a0
-1:
-	movel	%a0@+,%a1@+
-	dbra	%d0,1b
-
-	lea	%pc@(L(temp_mmap_mem)),%a0
-	movel	%a1,%a0@
-
-	movew	#PAGESIZE-1,%d0
-1:
-	clrl	%a1@+
-	dbra	%d0,1b
-
-	lea	%pc@(1b),%a0
-	movel	#1b,%a1
-	/* Skip temp mappings if phys == virt */
-	cmpl	%a0,%a1
-	jeq	1f
-
-	mmu_temp_map	%a0,%a0
-	mmu_temp_map	%a0,%a1
-
-	addw	#PAGESIZE,%a0
-	addw	#PAGESIZE,%a1
-	mmu_temp_map	%a0,%a0
-	mmu_temp_map	%a0,%a1
-1:
-	movel	%pc@(L(memory_start)),%a3
-	movel	%pc@(L(phys_kernel_start)),%d2
-
-	is_not_040_or_060(L(mmu_engage_030))
-
-L(mmu_engage_040):
-	.chip	68040
-	nop
-	cinva	%bc
-	nop
-	pflusha
-	nop
-	movec	%a3,%srp
-	movel	#TC_ENABLE+TC_PAGE4K,%d0
-	movec	%d0,%tc		/* enable the MMU */
-	jmp	1f:l
-1:	nop
-	movec	%a2,%srp
-	nop
-	cinva	%bc
-	nop
-	pflusha
-	.chip	68k
-	jra	L(mmu_engage_cleanup)
-
-L(mmu_engage_030_temp):
-	.space	12
-L(mmu_engage_030):
-	.chip	68030
-	lea	%pc@(L(mmu_engage_030_temp)),%a0
-	movel	#0x80000002,%a0@
-	movel	%a3,%a0@(4)
-	movel	#0x0808,%d0
-	movec	%d0,%cacr
-	pmove	%a0@,%srp
-	pflusha
-	/*
-	 * enable,super root enable,4096 byte pages,7 bit root index,
-	 * 7 bit pointer index, 6 bit page table index.
-	 */
-	movel	#0x82c07760,%a0@(8)
-	pmove	%a0@(8),%tc	/* enable the MMU */
-	jmp	1f:l
-1:	movel	%a2,%a0@(4)
-	movel	#0x0808,%d0
-	movec	%d0,%cacr
-	pmove	%a0@,%srp
-	pflusha
-	.chip	68k
-
-L(mmu_engage_cleanup):
-	subl	#PAGE_OFFSET,%d2
-	subl	%d2,%a2
-	movel	%a2,L(kernel_pgdir_ptr)
-	subl	%d2,%fp
-	subl	%d2,%sp
-	subl	%d2,ARG0
-
-func_return	mmu_engage
-
-func_start	mmu_get_root_table_entry,%d0/%a1
-
-#if 0
-	dputs	"mmu_get_root_table_entry:"
-	dputn	ARG1
-	dputs	" ="
-#endif
-
-	movel	%pc@(L(kernel_pgdir_ptr)),%a0
-	tstl	%a0
-	jne	2f
-
-	dputs	"\nmmu_init:"
-
-	/* Find the start of free memory, get_bi_record does this for us,
-	 * as the bootinfo structure is located directly behind the kernel
-	 * and and we simply search for the last entry.
-	 */
-	get_bi_record	BI_LAST
-	addw	#PAGESIZE-1,%a0
-	movel	%a0,%d0
-	andw	#-PAGESIZE,%d0
-
-	dputn	%d0
-
-	lea	%pc@(L(memory_start)),%a0
-	movel	%d0,%a0@
-	lea	%pc@(L(kernel_end)),%a0
-	movel	%d0,%a0@
-
-	/* we have to return the first page at _stext since the init code
-	 * in mm/init.c simply expects kernel_pg_dir there, the rest of
-	 * page is used for further ptr tables in get_ptr_table.
-	 */
-	lea	%pc@(_stext),%a0
-	lea	%pc@(L(mmu_cached_pointer_tables)),%a1
-	movel	%a0,%a1@
-	addl	#ROOT_TABLE_SIZE*4,%a1@
-
-	lea	%pc@(L(mmu_num_pointer_tables)),%a1
-	addql	#1,%a1@
-
-	/* clear the page
-	 */
-	movel	%a0,%a1
-	movew	#PAGESIZE/4-1,%d0
-1:
-	clrl	%a1@+
-	dbra	%d0,1b
-
-	lea	%pc@(L(kernel_pgdir_ptr)),%a1
-	movel	%a0,%a1@
-
-	dputn	%a0
-	dputc	'\n'
-2:
-	movel	ARG1,%d0
-	lea	%a0@(%d0*4),%a0
-
-#if 0
-	dputn	%a0
-	dputc	'\n'
-#endif
-
-func_return	mmu_get_root_table_entry
-
-
-
-func_start	mmu_get_ptr_table_entry,%d0/%a1
-
-#if 0
-	dputs	"mmu_get_ptr_table_entry:"
-	dputn	ARG1
-	dputn	ARG2
-	dputs	" ="
-#endif
-
-	movel	ARG1,%a0
-	movel	%a0@,%d0
-	jne	2f
-
-	/* Keep track of the number of pointer tables we use
-	 */
-	dputs	"\nmmu_get_new_ptr_table:"
-	lea	%pc@(L(mmu_num_pointer_tables)),%a0
-	movel	%a0@,%d0
-	addql	#1,%a0@
-
-	/* See if there is a free pointer table in our cache of pointer tables
-	 */
-	lea	%pc@(L(mmu_cached_pointer_tables)),%a1
-	andw	#7,%d0
-	jne	1f
-
-	/* Get a new pointer table page from above the kernel memory
-	 */
-	get_new_page
-	movel	%a0,%a1@
-1:
-	/* There is an unused pointer table in our cache... use it
-	 */
-	movel	%a1@,%d0
-	addl	#PTR_TABLE_SIZE*4,%a1@
-
-	dputn	%d0
-	dputc	'\n'
-
-	/* Insert the new pointer table into the root table
-	 */
-	movel	ARG1,%a0
-	orw	#_PAGE_TABLE+_PAGE_ACCESSED,%d0
-	movel	%d0,%a0@
-2:
-	/* Extract the pointer table entry
-	 */
-	andw	#-PTR_TABLE_SIZE,%d0
-	movel	%d0,%a0
-	movel	ARG2,%d0
-	lea	%a0@(%d0*4),%a0
-
-#if 0
-	dputn	%a0
-	dputc	'\n'
-#endif
-
-func_return	mmu_get_ptr_table_entry
-
-
-func_start	mmu_get_page_table_entry,%d0/%a1
-
-#if 0
-	dputs	"mmu_get_page_table_entry:"
-	dputn	ARG1
-	dputn	ARG2
-	dputs	" ="
-#endif
-
-	movel	ARG1,%a0
-	movel	%a0@,%d0
-	jne	2f
-
-	/* If the page table entry doesn't exist, we allocate a complete new
-	 * page and use it as one continues big page table which can cover
-	 * 4MB of memory, nearly almost all mappings have that alignment.
-	 */
-	get_new_page
-	addw	#_PAGE_TABLE+_PAGE_ACCESSED,%a0
-
-	/* align pointer table entry for a page of page tables
-	 */
-	movel	ARG1,%d0
-	andw	#-(PAGESIZE/PAGE_TABLE_SIZE),%d0
-	movel	%d0,%a1
-
-	/* Insert the page tables into the pointer entries
-	 */
-	moveq	#PAGESIZE/PAGE_TABLE_SIZE/4-1,%d0
-1:
-	movel	%a0,%a1@+
-	lea	%a0@(PAGE_TABLE_SIZE*4),%a0
-	dbra	%d0,1b
-
-	/* Now we can get the initialized pointer table entry
-	 */
-	movel	ARG1,%a0
-	movel	%a0@,%d0
-2:
-	/* Extract the page table entry
-	 */
-	andw	#-PAGE_TABLE_SIZE,%d0
-	movel	%d0,%a0
-	movel	ARG2,%d0
-	lea	%a0@(%d0*4),%a0
-
-#if 0
-	dputn	%a0
-	dputc	'\n'
-#endif
-
-func_return	mmu_get_page_table_entry
-
-/*
- *	get_new_page
- *
- *	Return a new page from the memory start and clear it.
- */
-func_start	get_new_page,%d0/%a1
-
-	dputs	"\nget_new_page:"
-
-	/* allocate the page and adjust memory_start
-	 */
-	lea	%pc@(L(memory_start)),%a0
-	movel	%a0@,%a1
-	addl	#PAGESIZE,%a0@
-
-	/* clear the new page
-	 */
-	movel	%a1,%a0
-	movew	#PAGESIZE/4-1,%d0
-1:
-	clrl	%a1@+
-	dbra	%d0,1b
-
-	dputn	%a0
-	dputc	'\n'
-
-func_return	get_new_page
-
-
-
-/*
- * Debug output support
- * Atarians have a choice between the parallel port, the serial port
- * from the MFP or a serial port of the SCC
- */
-
-#ifdef CONFIG_MAC
-
-L(scc_initable_mac):
-	.byte	9,12		/* Reset */
-	.byte	4,0x44		/* x16, 1 stopbit, no parity */
-	.byte	3,0xc0		/* receiver: 8 bpc */
-	.byte	5,0xe2		/* transmitter: 8 bpc, assert dtr/rts */
-	.byte	9,0		/* no interrupts */
-	.byte	10,0		/* NRZ */
-	.byte	11,0x50		/* use baud rate generator */
-	.byte	12,1,13,0	/* 38400 baud */
-	.byte	14,1		/* Baud rate generator enable */
-	.byte	3,0xc1		/* enable receiver */
-	.byte	5,0xea		/* enable transmitter */
-	.byte	-1
-	.even
-#endif
-
-#ifdef CONFIG_ATARI
-/* #define USE_PRINTER */
-/* #define USE_SCC_B */
-/* #define USE_SCC_A */
-#define USE_MFP
-
-#if defined(USE_SCC_A) || defined(USE_SCC_B)
-#define USE_SCC
-/* Initialisation table for SCC */
-L(scc_initable):
-	.byte	9,12		/* Reset */
-	.byte	4,0x44		/* x16, 1 stopbit, no parity */
-	.byte	3,0xc0		/* receiver: 8 bpc */
-	.byte	5,0xe2		/* transmitter: 8 bpc, assert dtr/rts */
-	.byte	9,0		/* no interrupts */
-	.byte	10,0		/* NRZ */
-	.byte	11,0x50		/* use baud rate generator */
-	.byte	12,24,13,0	/* 9600 baud */
-	.byte	14,2,14,3	/* use master clock for BRG, enable */
-	.byte	3,0xc1		/* enable receiver */
-	.byte	5,0xea		/* enable transmitter */
-	.byte	-1
-	.even
-#endif
-
-#ifdef USE_PRINTER
-
-LPSG_SELECT	= 0xff8800
-LPSG_READ	= 0xff8800
-LPSG_WRITE	= 0xff8802
-LPSG_IO_A	= 14
-LPSG_IO_B	= 15
-LPSG_CONTROL	= 7
-LSTMFP_GPIP	= 0xfffa01
-LSTMFP_DDR	= 0xfffa05
-LSTMFP_IERB	= 0xfffa09
-
-#elif defined(USE_SCC_B)
-
-LSCC_CTRL	= 0xff8c85
-LSCC_DATA	= 0xff8c87
-
-#elif defined(USE_SCC_A)
-
-LSCC_CTRL	= 0xff8c81
-LSCC_DATA	= 0xff8c83
-
-#elif defined(USE_MFP)
-
-LMFP_UCR     = 0xfffa29
-LMFP_TDCDR   = 0xfffa1d
-LMFP_TDDR    = 0xfffa25
-LMFP_TSR     = 0xfffa2d
-LMFP_UDR     = 0xfffa2f
-
-#endif
-#endif	/* CONFIG_ATARI */
-
-/*
- * Serial port output support.
- */
-
-/*
- * Initialize serial port hardware for 9600/8/1
- */
-func_start	serial_init,%d0/%d1/%a0/%a1
-	/*
-	 *	Some of the register usage that follows
-	 *	CONFIG_AMIGA
-	 *		a0 = pointer to boot info record
-	 *		d0 = boot info offset
-	 *	CONFIG_ATARI
-	 *		a0 = address of SCC
-	 *		a1 = Liobase address/address of scc_initable
-	 *		d0 = init data for serial port
-	 *	CONFIG_MAC
-	 *		a0 = address of SCC
-	 *		a1 = address of scc_initable_mac
-	 *		d0 = init data for serial port
-	 */
-
-#ifdef CONFIG_AMIGA
-#define SERIAL_DTR	7
-#define SERIAL_CNTRL	CIABBASE+C_PRA
-
-	is_not_amiga(1f)
-	lea	%pc@(L(custom)),%a0
-	movel	#-ZTWOBASE,%a0@
-	bclr	#SERIAL_DTR,SERIAL_CNTRL-ZTWOBASE
-	get_bi_record	BI_AMIGA_SERPER
-	movew	%a0@,CUSTOMBASE+C_SERPER-ZTWOBASE
-|	movew	#61,CUSTOMBASE+C_SERPER-ZTWOBASE
-1:
-#endif
-#ifdef CONFIG_ATARI
-	is_not_atari(4f)
-	movel	%pc@(L(iobase)),%a1
-#if defined(USE_PRINTER)
-	bclr	#0,%a1@(LSTMFP_IERB)
-	bclr	#0,%a1@(LSTMFP_DDR)
-	moveb	#LPSG_CONTROL,%a1@(LPSG_SELECT)
-	moveb	#0xff,%a1@(LPSG_WRITE)
-	moveb	#LPSG_IO_B,%a1@(LPSG_SELECT)
-	clrb	%a1@(LPSG_WRITE)
-	moveb	#LPSG_IO_A,%a1@(LPSG_SELECT)
-	moveb	%a1@(LPSG_READ),%d0
-	bset	#5,%d0
-	moveb	%d0,%a1@(LPSG_WRITE)
-#elif defined(USE_SCC)
-	lea	%a1@(LSCC_CTRL),%a0
-	lea	%pc@(L(scc_initable)),%a1
-2:	moveb	%a1@+,%d0
-	jmi	3f
-	moveb	%d0,%a0@
-	moveb	%a1@+,%a0@
-	jra	2b
-3:	clrb	%a0@
-#elif defined(USE_MFP)
-	bclr	#1,%a1@(LMFP_TSR)
-	moveb   #0x88,%a1@(LMFP_UCR)
-	andb	#0x70,%a1@(LMFP_TDCDR)
-	moveb   #2,%a1@(LMFP_TDDR)
-	orb	#1,%a1@(LMFP_TDCDR)
-	bset	#1,%a1@(LMFP_TSR)
-#endif
-	jra	L(serial_init_done)
-4:
-#endif
-#ifdef CONFIG_MAC
-	is_not_mac(L(serial_init_not_mac))
-
-#ifdef SERIAL_DEBUG
-/* You may define either or both of these. */
-#define MAC_USE_SCC_A /* Modem port */
-#define MAC_USE_SCC_B /* Printer port */
-
-#define mac_scc_cha_b_ctrl_offset	0x0
-#define mac_scc_cha_a_ctrl_offset	0x2
-#define mac_scc_cha_b_data_offset	0x4
-#define mac_scc_cha_a_data_offset	0x6
-
-#ifdef MAC_USE_SCC_A
-	/* Initialize channel A */
-	movel	%pc@(L(mac_sccbase)),%a0
-	lea	%pc@(L(scc_initable_mac)),%a1
-5:	moveb	%a1@+,%d0
-	jmi	6f
-	moveb	%d0,%a0@(mac_scc_cha_a_ctrl_offset)
-	moveb	%a1@+,%a0@(mac_scc_cha_a_ctrl_offset)
-	jra	5b
-6:
-#endif	/* MAC_USE_SCC_A */
-
-#ifdef MAC_USE_SCC_B
-	/* Initialize channel B */
-#ifndef MAC_USE_SCC_A	/* Load mac_sccbase only if needed */
-	movel	%pc@(L(mac_sccbase)),%a0
-#endif	/* MAC_USE_SCC_A */
-	lea	%pc@(L(scc_initable_mac)),%a1
-7:	moveb	%a1@+,%d0
-	jmi	8f
-	moveb	%d0,%a0@(mac_scc_cha_b_ctrl_offset)
-	moveb	%a1@+,%a0@(mac_scc_cha_b_ctrl_offset)
-	jra	7b
-8:
-#endif	/* MAC_USE_SCC_B */
-#endif	/* SERIAL_DEBUG */
-
-	jra	L(serial_init_done)
-L(serial_init_not_mac):
-#endif	/* CONFIG_MAC */
-
-#ifdef CONFIG_Q40
-	is_not_q40(2f)
-/* debug output goes into SRAM, so we don't do it unless requested
-   - check for '%LX$' signature in SRAM   */
-	lea	%pc@(q40_mem_cptr),%a1
-	move.l	#0xff020010,%a1@  /* must be inited - also used by debug=mem */
-	move.l	#0xff020000,%a1
-	cmp.b	#'%',%a1@
-	bne	2f	/*nodbg*/
-	addq.w	#4,%a1
-	cmp.b	#'L',%a1@
-	bne	2f	/*nodbg*/
-	addq.w	#4,%a1
-	cmp.b	#'X',%a1@
-	bne	2f	/*nodbg*/
-	addq.w	#4,%a1
-	cmp.b	#'$',%a1@
-	bne	2f	/*nodbg*/
-	/* signature OK */
-	lea	%pc@(L(q40_do_debug)),%a1
-	tas	%a1@
-/*nodbg: q40_do_debug is 0 by default*/
-2:
-#endif
-
-#ifdef CONFIG_APOLLO
-/* We count on the PROM initializing SIO1 */
-#endif
-
-#ifdef CONFIG_HP300
-/* We count on the boot loader initialising the UART */
-#endif
-
-L(serial_init_done):
-func_return	serial_init
-
-/*
- * Output character on serial port.
- */
-func_start	serial_putc,%d0/%d1/%a0/%a1
-
-	movel	ARG1,%d0
-	cmpib	#'\n',%d0
-	jbne	1f
-
-	/* A little safe recursion is good for the soul */
-	serial_putc	#'\r'
-1:
-
-#ifdef CONFIG_AMIGA
-	is_not_amiga(2f)
-	andw	#0x00ff,%d0
-	oriw	#0x0100,%d0
-	movel	%pc@(L(custom)),%a0
-	movew	%d0,%a0@(CUSTOMBASE+C_SERDAT)
-1:	movew	%a0@(CUSTOMBASE+C_SERDATR),%d0
-	andw	#0x2000,%d0
-	jeq	1b
-	jra	L(serial_putc_done)
-2:
-#endif
-
-#ifdef CONFIG_MAC
-	is_not_mac(5f)
-
-#ifdef SERIAL_DEBUG
-
-#ifdef MAC_USE_SCC_A
-	movel	%pc@(L(mac_sccbase)),%a1
-3:	btst	#2,%a1@(mac_scc_cha_a_ctrl_offset)
-	jeq	3b
-	moveb	%d0,%a1@(mac_scc_cha_a_data_offset)
-#endif	/* MAC_USE_SCC_A */
-
-#ifdef MAC_USE_SCC_B
-#ifndef MAC_USE_SCC_A	/* Load mac_sccbase only if needed */
-	movel	%pc@(L(mac_sccbase)),%a1
-#endif	/* MAC_USE_SCC_A */
-4:	btst	#2,%a1@(mac_scc_cha_b_ctrl_offset)
-	jeq	4b
-	moveb	%d0,%a1@(mac_scc_cha_b_data_offset)
-#endif	/* MAC_USE_SCC_B */
-
-#endif	/* SERIAL_DEBUG */
-
-	jra	L(serial_putc_done)
-5:
-#endif	/* CONFIG_MAC */
-
-#ifdef CONFIG_ATARI
-	is_not_atari(4f)
-	movel	%pc@(L(iobase)),%a1
-#if defined(USE_PRINTER)
-3:	btst	#0,%a1@(LSTMFP_GPIP)
-	jne	3b
-	moveb	#LPSG_IO_B,%a1@(LPSG_SELECT)
-	moveb	%d0,%a1@(LPSG_WRITE)
-	moveb	#LPSG_IO_A,%a1@(LPSG_SELECT)
-	moveb	%a1@(LPSG_READ),%d0
-	bclr	#5,%d0
-	moveb	%d0,%a1@(LPSG_WRITE)
-	nop
-	nop
-	bset	#5,%d0
-	moveb	%d0,%a1@(LPSG_WRITE)
-#elif defined(USE_SCC)
-3:	btst	#2,%a1@(LSCC_CTRL)
-	jeq	3b
-	moveb	%d0,%a1@(LSCC_DATA)
-#elif defined(USE_MFP)
-3:	btst	#7,%a1@(LMFP_TSR)
-	jeq	3b
-	moveb	%d0,%a1@(LMFP_UDR)
-#endif
-	jra	L(serial_putc_done)
-4:
-#endif	/* CONFIG_ATARI */
-
-#ifdef CONFIG_MVME147
-	is_not_mvme147(2f)
-1:	btst	#2,M147_SCC_CTRL_A
-	jeq	1b
-	moveb	%d0,M147_SCC_DATA_A
-	jbra	L(serial_putc_done)
-2:
-#endif
-
-#ifdef CONFIG_MVME16x
-	is_not_mvme16x(2f)
-	/*
-	 * If the loader gave us a board type then we can use that to
-	 * select an appropriate output routine; otherwise we just use
-	 * the Bug code.  If we have to use the Bug that means the Bug
-	 * workspace has to be valid, which means the Bug has to use
-	 * the SRAM, which is non-standard.
-	 */
-	moveml	%d0-%d7/%a2-%a6,%sp@-
-	movel	vme_brdtype,%d1
-	jeq	1f			| No tag - use the Bug
-	cmpi	#VME_TYPE_MVME162,%d1
-	jeq	6f
-	cmpi	#VME_TYPE_MVME172,%d1
-	jne	5f
-	/* 162/172; it's an SCC */
-6:	btst	#2,M162_SCC_CTRL_A
-	nop
-	nop
-	nop
-	jeq	6b
-	moveb	#8,M162_SCC_CTRL_A
-	nop
-	nop
-	nop
-	moveb	%d0,M162_SCC_CTRL_A
-	jra	3f
-5:
-	/* 166/167/177; it's a CD2401 */
-	moveb	#0,M167_CYCAR
-	moveb	M167_CYIER,%d2
-	moveb	#0x02,M167_CYIER
-7:
-	btst	#5,M167_PCSCCTICR
-	jeq	7b
-	moveb	M167_PCTPIACKR,%d1
-	moveb	M167_CYLICR,%d1
-	jeq	8f
-	moveb	#0x08,M167_CYTEOIR
-	jra	7b
-8:
-	moveb	%d0,M167_CYTDR
-	moveb	#0,M167_CYTEOIR
-	moveb	%d2,M167_CYIER
-	jra	3f
-1:
-	moveb	%d0,%sp@-
-	trap	#15
-	.word	0x0020	/* TRAP 0x020 */
-3:
-	moveml	%sp@+,%d0-%d7/%a2-%a6
-	jbra	L(serial_putc_done)
-2:
-#endif /* CONFIG_MVME16x */
-
-#ifdef CONFIG_BVME6000
-	is_not_bvme6000(2f)
-	/*
-	 * The BVME6000 machine has a serial port ...
-	 */
-1:	btst	#2,BVME_SCC_CTRL_A
-	jeq	1b
-	moveb	%d0,BVME_SCC_DATA_A
-	jbra	L(serial_putc_done)
-2:
-#endif
-
-#ifdef CONFIG_SUN3X
-	is_not_sun3x(2f)
-	movel	%d0,-(%sp)
-	movel	0xFEFE0018,%a1
-	jbsr	(%a1)
-	addq	#4,%sp
-	jbra	L(serial_putc_done)
-2:
-#endif
-
-#ifdef CONFIG_Q40
-	is_not_q40(2f)
-	tst.l	%pc@(L(q40_do_debug))	/* only debug if requested */
-	beq	2f
-	lea	%pc@(q40_mem_cptr),%a1
-	move.l	%a1@,%a0
-	move.b	%d0,%a0@
-	addq.l	#4,%a0
-	move.l	%a0,%a1@
-	jbra    L(serial_putc_done)
-2:
-#endif
-
-#ifdef CONFIG_APOLLO
-	is_not_apollo(2f)
-	movl    %pc@(L(iobase)),%a1
-	moveb	%d0,%a1@(LTHRB0)
-1:      moveb   %a1@(LSRB0),%d0
-	andb	#0x4,%d0
-	beq	1b
-	jbra	L(serial_putc_done)
-2:
-#endif
-
-#ifdef CONFIG_HP300
-	is_not_hp300(3f)
-	movl    %pc@(L(iobase)),%a1
-	addl	%pc@(L(uartbase)),%a1
-	movel	%pc@(L(uart_scode)),%d1	/* Check the scode */
-	jmi	3f			/* Unset? Exit */
-	cmpi	#256,%d1		/* APCI scode? */
-	jeq	2f
-1:      moveb   %a1@(DCALSR),%d1	/* Output to DCA */
-	andb	#0x20,%d1
-	beq	1b
-	moveb	%d0,%a1@(DCADATA)
-	jbra	L(serial_putc_done)
-2:	moveb	%a1@(APCILSR),%d1	/* Output to APCI */
-	andb	#0x20,%d1
-	beq	2b
-	moveb	%d0,%a1@(APCIDATA)
-	jbra	L(serial_putc_done)
-3:
-#endif
-
-L(serial_putc_done):
-func_return	serial_putc
-
-/*
- * Output a string.
- */
-func_start	puts,%d0/%a0
-
-	movel	ARG1,%a0
-	jra	2f
-1:
-#ifdef CONSOLE
-	console_putc	%d0
-#endif
-#ifdef SERIAL_DEBUG
-	serial_putc	%d0
-#endif
-2:	moveb	%a0@+,%d0
-	jne	1b
-
-func_return	puts
-
-/*
- * Output number in hex notation.
- */
-
-func_start	putn,%d0-%d2
-
-	putc	' '
-
-	movel	ARG1,%d0
-	moveq	#7,%d1
-1:	roll	#4,%d0
-	move	%d0,%d2
-	andb	#0x0f,%d2
-	addb	#'0',%d2
-	cmpb	#'9',%d2
-	jls	2f
-	addb	#'A'-('9'+1),%d2
-2:
-#ifdef CONSOLE
-	console_putc	%d2
-#endif
-#ifdef SERIAL_DEBUG
-	serial_putc	%d2
-#endif
-	dbra	%d1,1b
-
-func_return	putn
-
-#ifdef CONFIG_MAC
-/*
- *	mac_early_print
- *
- *	This routine takes its parameters on the stack.  It then
- *	turns around and calls the internal routines.  This routine
- *	is used by the boot console.
- *
- *	The calling parameters are:
- *		void mac_early_print(const char *str, unsigned length);
- *
- *	This routine does NOT understand variable arguments only
- *	simple strings!
- */
-ENTRY(mac_early_print)
-	moveml	%d0/%d1/%a0,%sp@-
-	movew	%sr,%sp@-
-	ori	#0x0700,%sr
-	movel	%sp@(18),%a0		/* fetch parameter */
-	movel	%sp@(22),%d1		/* fetch parameter */
-	jra	2f
-1:
-#ifdef CONSOLE
-	console_putc	%d0
-#endif
-#ifdef SERIAL_DEBUG
-	serial_putc	%d0
-#endif
-	subq	#1,%d1
-2:	jeq	3f
-	moveb	%a0@+,%d0
-	jne	1b
-3:
-	movew	%sp@+,%sr
-	moveml	%sp@+,%d0/%d1/%a0
-	rts
-#endif /* CONFIG_MAC */
-
-#if defined(CONFIG_HP300) || defined(CONFIG_APOLLO)
-func_start	set_leds,%d0/%a0
-	movel	ARG1,%d0
-#ifdef CONFIG_HP300
-	is_not_hp300(1f)
-	movel	%pc@(L(iobase)),%a0
-	moveb	%d0,%a0@(0x1ffff)
-	jra	2f
-#endif
-1:
-#ifdef CONFIG_APOLLO
-	movel   %pc@(L(iobase)),%a0
-	lsll    #8,%d0
-	eorw    #0xff00,%d0
-	moveb	%d0,%a0@(LCPUCTRL)
-#endif
-2:
-func_return	set_leds
-#endif
-
-#ifdef CONSOLE
-/*
- *	For continuity, see the data alignment
- *	to which this structure is tied.
- */
-#define Lconsole_struct_cur_column	0
-#define Lconsole_struct_cur_row		4
-#define Lconsole_struct_num_columns	8
-#define Lconsole_struct_num_rows	12
-#define Lconsole_struct_left_edge	16
-#define Lconsole_struct_penguin_putc	20
-
-func_start	console_init,%a0-%a4/%d0-%d7
-	/*
-	 *	Some of the register usage that follows
-	 *		a0 = pointer to boot_info
-	 *		a1 = pointer to screen
-	 *		a2 = pointer to Lconsole_globals
-	 *		d3 = pixel width of screen
-	 *		d4 = pixel height of screen
-	 *		(d3,d4) ~= (x,y) of a point just below
-	 *			and to the right of the screen
-	 *			NOT on the screen!
-	 *		d5 = number of bytes per scan line
-	 *		d6 = number of bytes on the entire screen
-	 */
-
-	lea	%pc@(L(console_globals)),%a2
-	movel	%pc@(L(mac_videobase)),%a1
-	movel	%pc@(L(mac_rowbytes)),%d5
-	movel	%pc@(L(mac_dimensions)),%d3	/* -> low byte */
-	movel	%d3,%d4
-	swap	%d4		/* -> high byte */
-	andl	#0xffff,%d3	/* d3 = screen width in pixels */
-	andl	#0xffff,%d4	/* d4 = screen height in pixels */
-
-	movel	%d5,%d6
-|	subl	#20,%d6
-	mulul	%d4,%d6		/* scan line bytes x num scan lines */
-	divul	#8,%d6		/* we'll clear 8 bytes at a time */
-	moveq	#-1,%d0		/* Mac_black */
-	subq	#1,%d6
-
-L(console_clear_loop):
-	movel	%d0,%a1@+
-	movel	%d0,%a1@+
-	dbra	%d6,L(console_clear_loop)
-
-	/* Calculate font size */
-
-#if   defined(FONT_8x8) && defined(CONFIG_FONT_8x8)
-	lea	%pc@(font_vga_8x8),%a0
-#elif defined(FONT_8x16) && defined(CONFIG_FONT_8x16)
-	lea	%pc@(font_vga_8x16),%a0
-#elif defined(FONT_6x11) && defined(CONFIG_FONT_6x11)
-	lea	%pc@(font_vga_6x11),%a0
-#elif defined(CONFIG_FONT_8x8) /* default */
-	lea	%pc@(font_vga_8x8),%a0
-#else /* no compiled-in font */
-	lea	0,%a0
-#endif
-
-	/*
-	 *	At this point we make a shift in register usage
-	 *	a1 = address of console_font pointer
-	 */
-	lea	%pc@(L(console_font)),%a1
-	movel	%a0,%a1@	/* store pointer to struct fbcon_font_desc in console_font */
-	tstl	%a0
-	jeq	1f
-	lea	%pc@(L(console_font_data)),%a4
-	movel	%a0@(FONT_DESC_DATA),%d0
-	subl	#L(console_font),%a1
-	addl	%a1,%d0
-	movel	%d0,%a4@
-
-	/*
-	 *	Calculate global maxs
-	 *	Note - we can use either an
-	 *	8 x 16 or 8 x 8 character font
-	 *	6 x 11 also supported
-	 */
-		/* ASSERT: a0 = contents of Lconsole_font */
-	movel	%d3,%d0				/* screen width in pixels */
-	divul	%a0@(FONT_DESC_WIDTH),%d0	/* d0 = max num chars per row */
-
-	movel	%d4,%d1				/* screen height in pixels */
-	divul	%a0@(FONT_DESC_HEIGHT),%d1	/* d1 = max num rows */
-
-	movel	%d0,%a2@(Lconsole_struct_num_columns)
-	movel	%d1,%a2@(Lconsole_struct_num_rows)
-
-	/*
-	 *	Clear the current row and column
-	 */
-	clrl	%a2@(Lconsole_struct_cur_column)
-	clrl	%a2@(Lconsole_struct_cur_row)
-	clrl	%a2@(Lconsole_struct_left_edge)
-
-	/*
-	 * Initialization is complete
-	 */
-1:
-func_return	console_init
-
-func_start	console_put_stats,%a0/%d7
-	/*
-	 *	Some of the register usage that follows
-	 *		a0 = pointer to boot_info
-	 *		d7 = value of boot_info fields
-	 */
-	puts	"\nMacLinux\n"
-
-#ifdef SERIAL_DEBUG
-	puts	"\n vidaddr:"
-	putn	%pc@(L(mac_videobase))		/* video addr. */
-
-	puts	"\n  _stext:"
-	lea	%pc@(_stext),%a0
-	putn	%a0
-
-	puts	"\nbootinfo:"
-	lea	%pc@(_end),%a0
-	putn	%a0
-
-	puts	"\n   cpuid:"
-	putn	%pc@(L(cputype))
-
-#  ifdef CONFIG_MAC
-	puts	"\n sccbase:"
-	putn	%pc@(L(mac_sccbase))
-#  endif
-#  ifdef MMU_PRINT
-	putc	'\n'
-	jbsr	mmu_print_machine_cpu_types
-#  endif
-#endif /* SERIAL_DEBUG */
-
-	putc	'\n'
-
-func_return	console_put_stats
-
-#ifdef CONSOLE_PENGUIN
-func_start	console_put_penguin,%a0-%a1/%d0-%d7
-	/*
-	 *	Get 'that_penguin' onto the screen in the upper right corner
-	 *	penguin is 64 x 74 pixels, align against right edge of screen
-	 */
-	lea	%pc@(L(mac_dimensions)),%a0
-	movel	%a0@,%d0
-	andil	#0xffff,%d0
-	subil	#64,%d0		/* snug up against the right edge */
-	clrl	%d1		/* start at the top */
-	movel	#73,%d7
-	lea	%pc@(L(that_penguin)),%a1
-L(console_penguin_row):
-	movel	#31,%d6
-L(console_penguin_pixel_pair):
-	moveb	%a1@,%d2
-	lsrb	#4,%d2
-	console_plot_pixel %d0,%d1,%d2
-	addq	#1,%d0
-	moveb	%a1@+,%d2
-	console_plot_pixel %d0,%d1,%d2
-	addq	#1,%d0
-	dbra	%d6,L(console_penguin_pixel_pair)
-
-	subil	#64,%d0
-	addq	#1,%d1
-	dbra	%d7,L(console_penguin_row)
-
-func_return	console_put_penguin
-
-/* include penguin bitmap */
-L(that_penguin):
-#include "../mac/mac_penguin.S"
-#endif
-
-	/*
-	 * Calculate source and destination addresses
-	 *	output	a1 = dest
-	 *		a2 = source
-	 */
-
-func_start	console_scroll,%a0-%a4/%d0-%d7
-	lea	%pc@(L(mac_videobase)),%a0
-	movel	%a0@,%a1
-	movel	%a1,%a2
-	lea	%pc@(L(mac_rowbytes)),%a0
-	movel	%a0@,%d5
-	movel	%pc@(L(console_font)),%a0
-	tstl	%a0
-	jeq	1f
-	mulul	%a0@(FONT_DESC_HEIGHT),%d5	/* account for # scan lines per character */
-	addal	%d5,%a2
-
-	/*
-	 * Get dimensions
-	 */
-	lea	%pc@(L(mac_dimensions)),%a0
-	movel	%a0@,%d3
-	movel	%d3,%d4
-	swap	%d4
-	andl	#0xffff,%d3	/* d3 = screen width in pixels */
-	andl	#0xffff,%d4	/* d4 = screen height in pixels */
-
-	/*
-	 * Calculate number of bytes to move
-	 */
-	lea	%pc@(L(mac_rowbytes)),%a0
-	movel	%a0@,%d6
-	movel	%pc@(L(console_font)),%a0
-	subl	%a0@(FONT_DESC_HEIGHT),%d4	/* we're not scrolling the top row! */
-	mulul	%d4,%d6		/* scan line bytes x num scan lines */
-	divul	#32,%d6		/* we'll move 8 longs at a time */
-	subq	#1,%d6
-
-L(console_scroll_loop):
-	movel	%a2@+,%a1@+
-	movel	%a2@+,%a1@+
-	movel	%a2@+,%a1@+
-	movel	%a2@+,%a1@+
-	movel	%a2@+,%a1@+
-	movel	%a2@+,%a1@+
-	movel	%a2@+,%a1@+
-	movel	%a2@+,%a1@+
-	dbra	%d6,L(console_scroll_loop)
-
-	lea	%pc@(L(mac_rowbytes)),%a0
-	movel	%a0@,%d6
-	movel	%pc@(L(console_font)),%a0
-	mulul	%a0@(FONT_DESC_HEIGHT),%d6	/* scan line bytes x font height */
-	divul	#32,%d6			/* we'll move 8 words at a time */
-	subq	#1,%d6
-
-	moveq	#-1,%d0
-L(console_scroll_clear_loop):
-	movel	%d0,%a1@+
-	movel	%d0,%a1@+
-	movel	%d0,%a1@+
-	movel	%d0,%a1@+
-	movel	%d0,%a1@+
-	movel	%d0,%a1@+
-	movel	%d0,%a1@+
-	movel	%d0,%a1@+
-	dbra	%d6,L(console_scroll_clear_loop)
-
-1:
-func_return	console_scroll
-
-
-func_start	console_putc,%a0/%a1/%d0-%d7
-
-	is_not_mac(L(console_exit))
-	tstl	%pc@(L(console_font))
-	jeq	L(console_exit)
-
-	/* Output character in d7 on console.
-	 */
-	movel	ARG1,%d7
-	cmpib	#'\n',%d7
-	jbne	1f
-
-	/* A little safe recursion is good for the soul */
-	console_putc	#'\r'
-1:
-	lea	%pc@(L(console_globals)),%a0
-
-	cmpib	#10,%d7
-	jne	L(console_not_lf)
-	movel	%a0@(Lconsole_struct_cur_row),%d0
-	addil	#1,%d0
-	movel	%d0,%a0@(Lconsole_struct_cur_row)
-	movel	%a0@(Lconsole_struct_num_rows),%d1
-	cmpl	%d1,%d0
-	jcs	1f
-	subil	#1,%d0
-	movel	%d0,%a0@(Lconsole_struct_cur_row)
-	console_scroll
-1:
-	jra	L(console_exit)
-
-L(console_not_lf):
-	cmpib	#13,%d7
-	jne	L(console_not_cr)
-	clrl	%a0@(Lconsole_struct_cur_column)
-	jra	L(console_exit)
-
-L(console_not_cr):
-	cmpib	#1,%d7
-	jne	L(console_not_home)
-	clrl	%a0@(Lconsole_struct_cur_row)
-	clrl	%a0@(Lconsole_struct_cur_column)
-	jra	L(console_exit)
-
-/*
- *	At this point we know that the %d7 character is going to be
- *	rendered on the screen.  Register usage is -
- *		a0 = pointer to console globals
- *		a1 = font data
- *		d0 = cursor column
- *		d1 = cursor row to draw the character
- *		d7 = character number
- */
-L(console_not_home):
-	movel	%a0@(Lconsole_struct_cur_column),%d0
-	addql	#1,%a0@(Lconsole_struct_cur_column)
-	movel	%a0@(Lconsole_struct_num_columns),%d1
-	cmpl	%d1,%d0
-	jcs	1f
-	console_putc	#'\n'	/* recursion is OK! */
-1:
-	movel	%a0@(Lconsole_struct_cur_row),%d1
-
-	/*
-	 *	At this point we make a shift in register usage
-	 *	a0 = address of pointer to font data (fbcon_font_desc)
-	 */
-	movel	%pc@(L(console_font)),%a0
-	movel	%pc@(L(console_font_data)),%a1	/* Load fbcon_font_desc.data into a1 */
-	andl	#0x000000ff,%d7
-		/* ASSERT: a0 = contents of Lconsole_font */
-	mulul	%a0@(FONT_DESC_HEIGHT),%d7	/* d7 = index into font data */
-	addl	%d7,%a1			/* a1 = points to char image */
-
-	/*
-	 *	At this point we make a shift in register usage
-	 *	d0 = pixel coordinate, x
-	 *	d1 = pixel coordinate, y
-	 *	d2 = (bit 0) 1/0 for white/black (!) pixel on screen
-	 *	d3 = font scan line data (8 pixels)
-	 *	d6 = count down for the font's pixel width (8)
-	 *	d7 = count down for the font's pixel count in height
-	 */
-		/* ASSERT: a0 = contents of Lconsole_font */
-	mulul	%a0@(FONT_DESC_WIDTH),%d0
-	mulul	%a0@(FONT_DESC_HEIGHT),%d1
-	movel	%a0@(FONT_DESC_HEIGHT),%d7	/* Load fbcon_font_desc.height into d7 */
-	subq	#1,%d7
-L(console_read_char_scanline):
-	moveb	%a1@+,%d3
-
-		/* ASSERT: a0 = contents of Lconsole_font */
-	movel	%a0@(FONT_DESC_WIDTH),%d6	/* Load fbcon_font_desc.width into d6 */
-	subql	#1,%d6
-
-L(console_do_font_scanline):
-	lslb	#1,%d3
-	scsb	%d2		/* convert 1 bit into a byte */
-	console_plot_pixel %d0,%d1,%d2
-	addq	#1,%d0
-	dbra	%d6,L(console_do_font_scanline)
-
-		/* ASSERT: a0 = contents of Lconsole_font */
-	subl	%a0@(FONT_DESC_WIDTH),%d0
-	addq	#1,%d1
-	dbra	%d7,L(console_read_char_scanline)
-
-L(console_exit):
-func_return	console_putc
-
-	/*
-	 *	Input:
-	 *		d0 = x coordinate
-	 *		d1 = y coordinate
-	 *		d2 = (bit 0) 1/0 for white/black (!)
-	 *	All registers are preserved
-	 */
-func_start	console_plot_pixel,%a0-%a1/%d0-%d4
-
-	movel	%pc@(L(mac_videobase)),%a1
-	movel	%pc@(L(mac_videodepth)),%d3
-	movel	ARG1,%d0
-	movel	ARG2,%d1
-	mulul	%pc@(L(mac_rowbytes)),%d1
-	movel	ARG3,%d2
-
-	/*
-	 *	Register usage:
-	 *		d0 = x coord becomes byte offset into frame buffer
-	 *		d1 = y coord
-	 *		d2 = black or white (0/1)
-	 *		d3 = video depth
-	 *		d4 = temp of x (d0) for many bit depths
-	 */
-L(test_1bit):
-	cmpb	#1,%d3
-	jbne	L(test_2bit)
-	movel	%d0,%d4		/* we need the low order 3 bits! */
-	divul	#8,%d0
-	addal	%d0,%a1
-	addal	%d1,%a1
-	andb	#7,%d4
-	eorb	#7,%d4		/* reverse the x-coordinate w/ screen-bit # */
-	andb	#1,%d2
-	jbne	L(white_1)
-	bsetb	%d4,%a1@
-	jbra	L(console_plot_pixel_exit)
-L(white_1):
-	bclrb	%d4,%a1@
-	jbra	L(console_plot_pixel_exit)
-
-L(test_2bit):
-	cmpb	#2,%d3
-	jbne	L(test_4bit)
-	movel	%d0,%d4		/* we need the low order 2 bits! */
-	divul	#4,%d0
-	addal	%d0,%a1
-	addal	%d1,%a1
-	andb	#3,%d4
-	eorb	#3,%d4		/* reverse the x-coordinate w/ screen-bit # */
-	lsll	#1,%d4		/* ! */
-	andb	#1,%d2
-	jbne	L(white_2)
-	bsetb	%d4,%a1@
-	addq	#1,%d4
-	bsetb	%d4,%a1@
-	jbra	L(console_plot_pixel_exit)
-L(white_2):
-	bclrb	%d4,%a1@
-	addq	#1,%d4
-	bclrb	%d4,%a1@
-	jbra	L(console_plot_pixel_exit)
-
-L(test_4bit):
-	cmpb	#4,%d3
-	jbne	L(test_8bit)
-	movel	%d0,%d4		/* we need the low order bit! */
-	divul	#2,%d0
-	addal	%d0,%a1
-	addal	%d1,%a1
-	andb	#1,%d4
-	eorb	#1,%d4
-	lsll	#2,%d4		/* ! */
-	andb	#1,%d2
-	jbne	L(white_4)
-	bsetb	%d4,%a1@
-	addq	#1,%d4
-	bsetb	%d4,%a1@
-	addq	#1,%d4
-	bsetb	%d4,%a1@
-	addq	#1,%d4
-	bsetb	%d4,%a1@
-	jbra	L(console_plot_pixel_exit)
-L(white_4):
-	bclrb	%d4,%a1@
-	addq	#1,%d4
-	bclrb	%d4,%a1@
-	addq	#1,%d4
-	bclrb	%d4,%a1@
-	addq	#1,%d4
-	bclrb	%d4,%a1@
-	jbra	L(console_plot_pixel_exit)
-
-L(test_8bit):
-	cmpb	#8,%d3
-	jbne	L(test_16bit)
-	addal	%d0,%a1
-	addal	%d1,%a1
-	andb	#1,%d2
-	jbne	L(white_8)
-	moveb	#0xff,%a1@
-	jbra	L(console_plot_pixel_exit)
-L(white_8):
-	clrb	%a1@
-	jbra	L(console_plot_pixel_exit)
-
-L(test_16bit):
-	cmpb	#16,%d3
-	jbne	L(console_plot_pixel_exit)
-	addal	%d0,%a1
-	addal	%d0,%a1
-	addal	%d1,%a1
-	andb	#1,%d2
-	jbne	L(white_16)
-	clrw	%a1@
-	jbra	L(console_plot_pixel_exit)
-L(white_16):
-	movew	#0x0fff,%a1@
-	jbra	L(console_plot_pixel_exit)
-
-L(console_plot_pixel_exit):
-func_return	console_plot_pixel
-#endif /* CONSOLE */
-
-#if 0
-/*
- * This is some old code lying around.  I don't believe
- * it's used or important anymore.  My guess is it contributed
- * to getting to this point, but it's done for now.
- * It was still in the 2.1.77 head.S, so it's still here.
- * (And still not used!)
- */
-L(showtest):
-	moveml	%a0/%d7,%sp@-
-	puts	"A="
-	putn	%a1
-
-	.long	0xf0119f15		| ptestr	#5,%a1@,#7,%a0
-
-	puts	"DA="
-	putn	%a0
-
-	puts	"D="
-	putn	%a0@
-
-	puts	"S="
-	lea	%pc@(L(mmu)),%a0
-	.long	0xf0106200		| pmove		%psr,%a0@
-	clrl	%d7
-	movew	%a0@,%d7
-	putn	%d7
-
-	putc	'\n'
-	moveml	%sp@+,%a0/%d7
-	rts
-#endif	/* 0 */
-
-__INITDATA
-	.align	4
-
-#if defined(CONFIG_ATARI) || defined(CONFIG_AMIGA) || \
-    defined(CONFIG_HP300) || defined(CONFIG_APOLLO)
-L(custom):
-L(iobase):
-	.long 0
-#endif
-
-#if defined(CONSOLE)
-L(console_globals):
-	.long	0		/* cursor column */
-	.long	0		/* cursor row */
-	.long	0		/* max num columns */
-	.long	0		/* max num rows */
-	.long	0		/* left edge */
-	.long	0		/* mac putc */
-L(console_font):
-	.long	0		/* pointer to console font (struct font_desc) */
-L(console_font_data):
-	.long	0		/* pointer to console font data */
-#endif /* CONSOLE */
-
-#if defined(MMU_PRINT)
-L(mmu_print_data):
-	.long	0		/* valid flag */
-	.long	0		/* start logical */
-	.long	0		/* next logical */
-	.long	0		/* start physical */
-	.long	0		/* next physical */
-#endif /* MMU_PRINT */
-
-L(cputype):
-	.long	0
-L(mmu_cached_pointer_tables):
-	.long	0
-L(mmu_num_pointer_tables):
-	.long	0
-L(phys_kernel_start):
-	.long	0
-L(kernel_end):
-	.long	0
-L(memory_start):
-	.long	0
-L(kernel_pgdir_ptr):
-	.long	0
-L(temp_mmap_mem):
-	.long	0
-
-#if defined (CONFIG_MVME147)
-M147_SCC_CTRL_A = 0xfffe3002
-M147_SCC_DATA_A = 0xfffe3003
-#endif
-
-#if defined (CONFIG_MVME16x)
-M162_SCC_CTRL_A = 0xfff45005
-M167_CYCAR = 0xfff450ee
-M167_CYIER = 0xfff45011
-M167_CYLICR = 0xfff45026
-M167_CYTEOIR = 0xfff45085
-M167_CYTDR = 0xfff450f8
-M167_PCSCCTICR = 0xfff4201e
-M167_PCTPIACKR = 0xfff42025
-#endif
-
-#if defined (CONFIG_BVME6000)
-BVME_SCC_CTRL_A	= 0xffb0000b
-BVME_SCC_DATA_A	= 0xffb0000f
-#endif
-
-#if defined(CONFIG_MAC)
-L(mac_booter_data):
-	.long	0
-L(mac_videobase):
-	.long	0
-L(mac_videodepth):
-	.long	0
-L(mac_dimensions):
-	.long	0
-L(mac_rowbytes):
-	.long	0
-#ifdef SERIAL_DEBUG
-L(mac_sccbase):
-	.long	0
-#endif
-#endif /* CONFIG_MAC */
-
-#if defined (CONFIG_APOLLO)
-LSRB0        = 0x10412
-LTHRB0       = 0x10416
-LCPUCTRL     = 0x10100
-#endif
-
-#if defined(CONFIG_HP300)
-DCADATA	     = 0x11
-DCALSR	     = 0x1b
-APCIDATA     = 0x00
-APCILSR      = 0x14
-L(uartbase):
-	.long	0
-L(uart_scode):
-	.long	-1
-#endif
-
-__FINIT
-	.data
-	.align	4
-
-availmem:
-	.long	0
-m68k_pgtable_cachemode:
-	.long	0
-m68k_supervisor_cachemode:
-	.long	0
-#if defined(CONFIG_MVME16x)
-mvme_bdid:
-	.long	0,0,0,0,0,0,0,0
-#endif
-#if defined(CONFIG_Q40)
-q40_mem_cptr:
-	.long	0
-L(q40_do_debug):
-	.long	0
-#endif
diff --git a/ANDROID_3.4.5/arch/m68k/kernel/init_task.c b/ANDROID_3.4.5/arch/m68k/kernel/init_task.c
deleted file mode 100644
index c744cfc6..00000000
--- a/ANDROID_3.4.5/arch/m68k/kernel/init_task.c
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- *  linux/arch/m68knommu/kernel/init_task.c
- */
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/sched.h>
-#include <linux/init.h>
-#include <linux/init_task.h>
-#include <linux/fs.h>
-#include <linux/mqueue.h>
-
-#include <asm/uaccess.h>
-#include <asm/pgtable.h>
-
-static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
-static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
-/*
- * Initial task structure.
- *
- * All other task structs will be allocated on slabs in fork.c
- */
-struct task_struct init_task = INIT_TASK(init_task);
-
-EXPORT_SYMBOL(init_task);
-
-/*
- * Initial thread structure.
- *
- * We need to make sure that this is THREAD size aligned due to the
- * way process stacks are handled. This is done by having a special
- * "init_task" linker map entry..
- */
-union thread_union init_thread_union __init_task_data =
-	{ INIT_THREAD_INFO(init_task) };
-
diff --git a/ANDROID_3.4.5/arch/m68k/kernel/ints.c b/ANDROID_3.4.5/arch/m68k/kernel/ints.c
deleted file mode 100644
index 6b32b64b..00000000
--- a/ANDROID_3.4.5/arch/m68k/kernel/ints.c
+++ /dev/null
@@ -1,175 +0,0 @@
-/*
- * linux/arch/m68k/kernel/ints.c -- Linux/m68k general interrupt handling code
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file COPYING in the main directory of this archive
- * for more details.
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/kernel_stat.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-
-#include <asm/setup.h>
-#include <asm/irq.h>
-#include <asm/traps.h>
-#include <asm/page.h>
-#include <asm/machdep.h>
-#include <asm/cacheflush.h>
-#include <asm/irq_regs.h>
-
-#ifdef CONFIG_Q40
-#include <asm/q40ints.h>
-#endif
-
-extern u32 auto_irqhandler_fixup[];
-extern u16 user_irqvec_fixup[];
-
-static int m68k_first_user_vec;
-
-static struct irq_chip auto_irq_chip = {
-	.name		= "auto",
-	.irq_startup	= m68k_irq_startup,
-	.irq_shutdown	= m68k_irq_shutdown,
-};
-
-static struct irq_chip user_irq_chip = {
-	.name		= "user",
-	.irq_startup	= m68k_irq_startup,
-	.irq_shutdown	= m68k_irq_shutdown,
-};
-
-/*
- * void init_IRQ(void)
- *
- * Parameters:	None
- *
- * Returns:	Nothing
- *
- * This function should be called during kernel startup to initialize
- * the IRQ handling routines.
- */
-
-void __init init_IRQ(void)
-{
-	int i;
-
-	/* assembly irq entry code relies on this... */
-	if (HARDIRQ_MASK != 0x00ff0000) {
-		extern void hardirq_mask_is_broken(void);
-		hardirq_mask_is_broken();
-	}
-
-	for (i = IRQ_AUTO_1; i <= IRQ_AUTO_7; i++)
-		irq_set_chip_and_handler(i, &auto_irq_chip, handle_simple_irq);
-
-	mach_init_IRQ();
-}
-
-/**
- * m68k_setup_auto_interrupt
- * @handler: called from auto vector interrupts
- *
- * setup the handler to be called from auto vector interrupts instead of the
- * standard do_IRQ(), it will be called with irq numbers in the range
- * from IRQ_AUTO_1 - IRQ_AUTO_7.
- */
-void __init m68k_setup_auto_interrupt(void (*handler)(unsigned int, struct pt_regs *))
-{
-	if (handler)
-		*auto_irqhandler_fixup = (u32)handler;
-	flush_icache();
-}
-
-/**
- * m68k_setup_user_interrupt
- * @vec: first user vector interrupt to handle
- * @cnt: number of active user vector interrupts
- *
- * setup user vector interrupts, this includes activating the specified range
- * of interrupts, only then these interrupts can be requested (note: this is
- * different from auto vector interrupts).
- */
-void __init m68k_setup_user_interrupt(unsigned int vec, unsigned int cnt)
-{
-	int i;
-
-	BUG_ON(IRQ_USER + cnt > NR_IRQS);
-	m68k_first_user_vec = vec;
-	for (i = 0; i < cnt; i++)
-		irq_set_chip(IRQ_USER + i, &user_irq_chip);
-	*user_irqvec_fixup = vec - IRQ_USER;
-	flush_icache();
-}
-
-/**
- * m68k_setup_irq_controller
- * @chip: irq chip which controls specified irq
- * @handle: flow handler which handles specified irq
- * @irq: first irq to be managed by the controller
- * @cnt: number of irqs to be managed by the controller
- *
- * Change the controller for the specified range of irq, which will be used to
- * manage these irq. auto/user irq already have a default controller, which can
- * be changed as well, but the controller probably should use m68k_irq_startup/
- * m68k_irq_shutdown.
- */
-void m68k_setup_irq_controller(struct irq_chip *chip,
-			       irq_flow_handler_t handle, unsigned int irq,
-			       unsigned int cnt)
-{
-	int i;
-
-	for (i = 0; i < cnt; i++) {
-		irq_set_chip(irq + i, chip);
-		if (handle)
-			irq_set_handler(irq + i, handle);
-	}
-}
-
-unsigned int m68k_irq_startup_irq(unsigned int irq)
-{
-	if (irq <= IRQ_AUTO_7)
-		vectors[VEC_SPUR + irq] = auto_inthandler;
-	else
-		vectors[m68k_first_user_vec + irq - IRQ_USER] = user_inthandler;
-	return 0;
-}
-
-unsigned int m68k_irq_startup(struct irq_data *data)
-{
-	return m68k_irq_startup_irq(data->irq);
-}
-
-void m68k_irq_shutdown(struct irq_data *data)
-{
-	unsigned int irq = data->irq;
-
-	if (irq <= IRQ_AUTO_7)
-		vectors[VEC_SPUR + irq] = bad_inthandler;
-	else
-		vectors[m68k_first_user_vec + irq - IRQ_USER] = bad_inthandler;
-}
-
-
-unsigned int irq_canonicalize(unsigned int irq)
-{
-#ifdef CONFIG_Q40
-	if (MACH_IS_Q40 && irq == 11)
-		irq = 10;
-#endif
-	return irq;
-}
-
-EXPORT_SYMBOL(irq_canonicalize);
-
-
-asmlinkage void handle_badint(struct pt_regs *regs)
-{
-	atomic_inc(&irq_err_count);
-	pr_warn("unexpected interrupt from %u\n", regs->vector);
-}
diff --git a/ANDROID_3.4.5/arch/m68k/kernel/irq.c b/ANDROID_3.4.5/arch/m68k/kernel/irq.c
deleted file mode 100644
index 9ab4f550..00000000
--- a/ANDROID_3.4.5/arch/m68k/kernel/irq.c
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * irq.c
- *
- * (C) Copyright 2007, Greg Ungerer <gerg@snapgear.com>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file COPYING in the main directory of this archive
- * for more details.
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/kernel_stat.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/seq_file.h>
-#include <asm/traps.h>
-
-asmlinkage void do_IRQ(int irq, struct pt_regs *regs)
-{
-	struct pt_regs *oldregs = set_irq_regs(regs);
-
-	irq_enter();
-	generic_handle_irq(irq);
-	irq_exit();
-
-	set_irq_regs(oldregs);
-}
-
-
-/* The number of spurious interrupts */
-atomic_t irq_err_count;
-
-int arch_show_interrupts(struct seq_file *p, int prec)
-{
-	seq_printf(p, "%*s: %10u\n", prec, "ERR", atomic_read(&irq_err_count));
-	return 0;
-}
diff --git a/ANDROID_3.4.5/arch/m68k/kernel/m68k_ksyms.c b/ANDROID_3.4.5/arch/m68k/kernel/m68k_ksyms.c
deleted file mode 100644
index 774c1bd5..00000000
--- a/ANDROID_3.4.5/arch/m68k/kernel/m68k_ksyms.c
+++ /dev/null
@@ -1,32 +0,0 @@
-#include <linux/module.h>
-
-asmlinkage long long __ashldi3 (long long, int);
-asmlinkage long long __ashrdi3 (long long, int);
-asmlinkage long long __lshrdi3 (long long, int);
-asmlinkage long long __muldi3 (long long, long long);
-
-/* The following are special because they're not called
-   explicitly (the C compiler generates them).  Fortunately,
-   their interface isn't gonna change any time soon now, so
-   it's OK to leave it out of version control.  */
-EXPORT_SYMBOL(__ashldi3);
-EXPORT_SYMBOL(__ashrdi3);
-EXPORT_SYMBOL(__lshrdi3);
-EXPORT_SYMBOL(__muldi3);
-
-#if defined(CONFIG_CPU_HAS_NO_MULDIV64)
-/*
- * Simpler 68k and ColdFire parts also need a few other gcc functions.
- */
-extern long long __divsi3(long long, long long);
-extern long long __modsi3(long long, long long);
-extern long long __mulsi3(long long, long long);
-extern long long __udivsi3(long long, long long);
-extern long long __umodsi3(long long, long long);
-
-EXPORT_SYMBOL(__divsi3);
-EXPORT_SYMBOL(__modsi3);
-EXPORT_SYMBOL(__mulsi3);
-EXPORT_SYMBOL(__udivsi3);
-EXPORT_SYMBOL(__umodsi3);
-#endif
diff --git a/ANDROID_3.4.5/arch/m68k/kernel/module.c b/ANDROID_3.4.5/arch/m68k/kernel/module.c
deleted file mode 100644
index 34849c4c..00000000
--- a/ANDROID_3.4.5/arch/m68k/kernel/module.c
+++ /dev/null
@@ -1,129 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file COPYING in the main directory of this archive
- * for more details.
- */
-
-#include <linux/moduleloader.h>
-#include <linux/elf.h>
-#include <linux/vmalloc.h>
-#include <linux/fs.h>
-#include <linux/string.h>
-#include <linux/kernel.h>
-
-#if 0
-#define DEBUGP printk
-#else
-#define DEBUGP(fmt...)
-#endif
-
-#ifdef CONFIG_MODULES
-
-int apply_relocate(Elf32_Shdr *sechdrs,
-		   const char *strtab,
-		   unsigned int symindex,
-		   unsigned int relsec,
-		   struct module *me)
-{
-	unsigned int i;
-	Elf32_Rel *rel = (void *)sechdrs[relsec].sh_addr;
-	Elf32_Sym *sym;
-	uint32_t *location;
-
-	DEBUGP("Applying relocate section %u to %u\n", relsec,
-	       sechdrs[relsec].sh_info);
-	for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) {
-		/* This is where to make the change */
-		location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr
-			+ rel[i].r_offset;
-		/* This is the symbol it is referring to.  Note that all
-		   undefined symbols have been resolved.  */
-		sym = (Elf32_Sym *)sechdrs[symindex].sh_addr
-			+ ELF32_R_SYM(rel[i].r_info);
-
-		switch (ELF32_R_TYPE(rel[i].r_info)) {
-		case R_68K_32:
-			/* We add the value into the location given */
-			*location += sym->st_value;
-			break;
-		case R_68K_PC32:
-			/* Add the value, subtract its postition */
-			*location += sym->st_value - (uint32_t)location;
-			break;
-		default:
-			printk(KERN_ERR "module %s: Unknown relocation: %u\n",
-			       me->name, ELF32_R_TYPE(rel[i].r_info));
-			return -ENOEXEC;
-		}
-	}
-	return 0;
-}
-
-int apply_relocate_add(Elf32_Shdr *sechdrs,
-		       const char *strtab,
-		       unsigned int symindex,
-		       unsigned int relsec,
-		       struct module *me)
-{
-	unsigned int i;
-	Elf32_Rela *rel = (void *)sechdrs[relsec].sh_addr;
-	Elf32_Sym *sym;
-	uint32_t *location;
-
-	DEBUGP("Applying relocate_add section %u to %u\n", relsec,
-	       sechdrs[relsec].sh_info);
-	for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) {
-		/* This is where to make the change */
-		location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr
-			+ rel[i].r_offset;
-		/* This is the symbol it is referring to.  Note that all
-		   undefined symbols have been resolved.  */
-		sym = (Elf32_Sym *)sechdrs[symindex].sh_addr
-			+ ELF32_R_SYM(rel[i].r_info);
-
-		switch (ELF32_R_TYPE(rel[i].r_info)) {
-		case R_68K_32:
-			/* We add the value into the location given */
-			*location = rel[i].r_addend + sym->st_value;
-			break;
-		case R_68K_PC32:
-			/* Add the value, subtract its postition */
-			*location = rel[i].r_addend + sym->st_value - (uint32_t)location;
-			break;
-		default:
-			printk(KERN_ERR "module %s: Unknown relocation: %u\n",
-			       me->name, ELF32_R_TYPE(rel[i].r_info));
-			return -ENOEXEC;
-		}
-	}
-	return 0;
-}
-
-int module_finalize(const Elf_Ehdr *hdr,
-		    const Elf_Shdr *sechdrs,
-		    struct module *mod)
-{
-	module_fixup(mod, mod->arch.fixup_start, mod->arch.fixup_end);
-	return 0;
-}
-
-#endif /* CONFIG_MODULES */
-
-void module_fixup(struct module *mod, struct m68k_fixup_info *start,
-		  struct m68k_fixup_info *end)
-{
-#ifdef CONFIG_MMU
-	struct m68k_fixup_info *fixup;
-
-	for (fixup = start; fixup < end; fixup++) {
-		switch (fixup->type) {
-		case m68k_fixup_memoffset:
-			*(u32 *)fixup->addr = m68k_memoffset;
-			break;
-		case m68k_fixup_vnode_shift:
-			*(u16 *)fixup->addr += m68k_virt_to_node_shift;
-			break;
-		}
-	}
-#endif
-}
diff --git a/ANDROID_3.4.5/arch/m68k/kernel/module.lds b/ANDROID_3.4.5/arch/m68k/kernel/module.lds
deleted file mode 100644
index fda94fa3..00000000
--- a/ANDROID_3.4.5/arch/m68k/kernel/module.lds
+++ /dev/null
@@ -1,7 +0,0 @@
-SECTIONS {
-	.m68k_fixup : {
-		__start_fixup = .;
-		*(.m68k_fixup)
-		__stop_fixup = .;
-	}
-}
diff --git a/ANDROID_3.4.5/arch/m68k/kernel/process.c b/ANDROID_3.4.5/arch/m68k/kernel/process.c
deleted file mode 100644
index c488e3cf..00000000
--- a/ANDROID_3.4.5/arch/m68k/kernel/process.c
+++ /dev/null
@@ -1,377 +0,0 @@
-/*
- *  linux/arch/m68k/kernel/process.c
- *
- *  Copyright (C) 1995  Hamish Macdonald
- *
- *  68060 fixes by Jesper Skov
- */
-
-/*
- * This file handles the architecture-dependent parts of process handling..
- */
-
-#include <linux/errno.h>
-#include <linux/module.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/slab.h>
-#include <linux/fs.h>
-#include <linux/smp.h>
-#include <linux/stddef.h>
-#include <linux/unistd.h>
-#include <linux/ptrace.h>
-#include <linux/user.h>
-#include <linux/reboot.h>
-#include <linux/init_task.h>
-#include <linux/mqueue.h>
-
-#include <asm/uaccess.h>
-#include <asm/traps.h>
-#include <asm/machdep.h>
-#include <asm/setup.h>
-#include <asm/pgtable.h>
-
-
-asmlinkage void ret_from_fork(void);
-
-
-/*
- * Return saved PC from a blocked thread
- */
-unsigned long thread_saved_pc(struct task_struct *tsk)
-{
-	struct switch_stack *sw = (struct switch_stack *)tsk->thread.ksp;
-	/* Check whether the thread is blocked in resume() */
-	if (in_sched_functions(sw->retpc))
-		return ((unsigned long *)sw->a6)[1];
-	else
-		return sw->retpc;
-}
-
-/*
- * The idle loop on an m68k..
- */
-static void default_idle(void)
-{
-	if (!need_resched())
-#if defined(MACH_ATARI_ONLY)
-		/* block out HSYNC on the atari (falcon) */
-		__asm__("stop #0x2200" : : : "cc");
-#else
-		__asm__("stop #0x2000" : : : "cc");
-#endif
-}
-
-void (*idle)(void) = default_idle;
-
-/*
- * The idle thread. There's no useful work to be
- * done, so just try to conserve power and have a
- * low exit latency (ie sit in a loop waiting for
- * somebody to say that they'd like to reschedule)
- */
-void cpu_idle(void)
-{
-	/* endless idle loop with no priority at all */
-	while (1) {
-		while (!need_resched())
-			idle();
-		schedule_preempt_disabled();
-	}
-}
-
-void machine_restart(char * __unused)
-{
-	if (mach_reset)
-		mach_reset();
-	for (;;);
-}
-
-void machine_halt(void)
-{
-	if (mach_halt)
-		mach_halt();
-	for (;;);
-}
-
-void machine_power_off(void)
-{
-	if (mach_power_off)
-		mach_power_off();
-	for (;;);
-}
-
-void (*pm_power_off)(void) = machine_power_off;
-EXPORT_SYMBOL(pm_power_off);
-
-void show_regs(struct pt_regs * regs)
-{
-	printk("\n");
-	printk("Format %02x  Vector: %04x  PC: %08lx  Status: %04x    %s\n",
-	       regs->format, regs->vector, regs->pc, regs->sr, print_tainted());
-	printk("ORIG_D0: %08lx  D0: %08lx  A2: %08lx  A1: %08lx\n",
-	       regs->orig_d0, regs->d0, regs->a2, regs->a1);
-	printk("A0: %08lx  D5: %08lx  D4: %08lx\n",
-	       regs->a0, regs->d5, regs->d4);
-	printk("D3: %08lx  D2: %08lx  D1: %08lx\n",
-	       regs->d3, regs->d2, regs->d1);
-	if (!(regs->sr & PS_S))
-		printk("USP: %08lx\n", rdusp());
-}
-
-/*
- * Create a kernel thread
- */
-int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags)
-{
-	int pid;
-	mm_segment_t fs;
-
-	fs = get_fs();
-	set_fs (KERNEL_DS);
-
-	{
-	register long retval __asm__ ("d0");
-	register long clone_arg __asm__ ("d1") = flags | CLONE_VM | CLONE_UNTRACED;
-
-	retval = __NR_clone;
-	__asm__ __volatile__
-	  ("clrl %%d2\n\t"
-	   "trap #0\n\t"		/* Linux/m68k system call */
-	   "tstl %0\n\t"		/* child or parent */
-	   "jne 1f\n\t"			/* parent - jump */
-#ifdef CONFIG_MMU
-	   "lea %%sp@(%c7),%6\n\t"	/* reload current */
-	   "movel %6@,%6\n\t"
-#endif
-	   "movel %3,%%sp@-\n\t"	/* push argument */
-	   "jsr %4@\n\t"		/* call fn */
-	   "movel %0,%%d1\n\t"		/* pass exit value */
-	   "movel %2,%%d0\n\t"		/* exit */
-	   "trap #0\n"
-	   "1:"
-	   : "+d" (retval)
-	   : "i" (__NR_clone), "i" (__NR_exit),
-	     "r" (arg), "a" (fn), "d" (clone_arg), "r" (current),
-	     "i" (-THREAD_SIZE)
-	   : "d2");
-
-	pid = retval;
-	}
-
-	set_fs (fs);
-	return pid;
-}
-EXPORT_SYMBOL(kernel_thread);
-
-void flush_thread(void)
-{
-	current->thread.fs = __USER_DS;
-#ifdef CONFIG_FPU
-	if (!FPU_IS_EMU) {
-		unsigned long zero = 0;
-		asm volatile("frestore %0": :"m" (zero));
-	}
-#endif
-}
-
-/*
- * "m68k_fork()".. By the time we get here, the
- * non-volatile registers have also been saved on the
- * stack. We do some ugly pointer stuff here.. (see
- * also copy_thread)
- */
-
-asmlinkage int m68k_fork(struct pt_regs *regs)
-{
-#ifdef CONFIG_MMU
-	return do_fork(SIGCHLD, rdusp(), regs, 0, NULL, NULL);
-#else
-	return -EINVAL;
-#endif
-}
-
-asmlinkage int m68k_vfork(struct pt_regs *regs)
-{
-	return do_fork(CLONE_VFORK | CLONE_VM | SIGCHLD, rdusp(), regs, 0,
-		       NULL, NULL);
-}
-
-asmlinkage int m68k_clone(struct pt_regs *regs)
-{
-	unsigned long clone_flags;
-	unsigned long newsp;
-	int __user *parent_tidptr, *child_tidptr;
-
-	/* syscall2 puts clone_flags in d1 and usp in d2 */
-	clone_flags = regs->d1;
-	newsp = regs->d2;
-	parent_tidptr = (int __user *)regs->d3;
-	child_tidptr = (int __user *)regs->d4;
-	if (!newsp)
-		newsp = rdusp();
-	return do_fork(clone_flags, newsp, regs, 0,
-		       parent_tidptr, child_tidptr);
-}
-
-int copy_thread(unsigned long clone_flags, unsigned long usp,
-		 unsigned long unused,
-		 struct task_struct * p, struct pt_regs * regs)
-{
-	struct pt_regs * childregs;
-	struct switch_stack * childstack, *stack;
-	unsigned long *retp;
-
-	childregs = (struct pt_regs *) (task_stack_page(p) + THREAD_SIZE) - 1;
-
-	*childregs = *regs;
-	childregs->d0 = 0;
-
-	retp = ((unsigned long *) regs);
-	stack = ((struct switch_stack *) retp) - 1;
-
-	childstack = ((struct switch_stack *) childregs) - 1;
-	*childstack = *stack;
-	childstack->retpc = (unsigned long)ret_from_fork;
-
-	p->thread.usp = usp;
-	p->thread.ksp = (unsigned long)childstack;
-
-	if (clone_flags & CLONE_SETTLS)
-		task_thread_info(p)->tp_value = regs->d5;
-
-	/*
-	 * Must save the current SFC/DFC value, NOT the value when
-	 * the parent was last descheduled - RGH  10-08-96
-	 */
-	p->thread.fs = get_fs().seg;
-
-#ifdef CONFIG_FPU
-	if (!FPU_IS_EMU) {
-		/* Copy the current fpu state */
-		asm volatile ("fsave %0" : : "m" (p->thread.fpstate[0]) : "memory");
-
-		if (!CPU_IS_060 ? p->thread.fpstate[0] : p->thread.fpstate[2]) {
-			if (CPU_IS_COLDFIRE) {
-				asm volatile ("fmovemd %/fp0-%/fp7,%0\n\t"
-					      "fmovel %/fpiar,%1\n\t"
-					      "fmovel %/fpcr,%2\n\t"
-					      "fmovel %/fpsr,%3"
-					      :
-					      : "m" (p->thread.fp[0]),
-						"m" (p->thread.fpcntl[0]),
-						"m" (p->thread.fpcntl[1]),
-						"m" (p->thread.fpcntl[2])
-					      : "memory");
-			} else {
-				asm volatile ("fmovemx %/fp0-%/fp7,%0\n\t"
-					      "fmoveml %/fpiar/%/fpcr/%/fpsr,%1"
-					      :
-					      : "m" (p->thread.fp[0]),
-						"m" (p->thread.fpcntl[0])
-					      : "memory");
-			}
-		}
-
-		/* Restore the state in case the fpu was busy */
-		asm volatile ("frestore %0" : : "m" (p->thread.fpstate[0]));
-	}
-#endif /* CONFIG_FPU */
-
-	return 0;
-}
-
-/* Fill in the fpu structure for a core dump.  */
-#ifdef CONFIG_FPU
-int dump_fpu (struct pt_regs *regs, struct user_m68kfp_struct *fpu)
-{
-	char fpustate[216];
-
-	if (FPU_IS_EMU) {
-		int i;
-
-		memcpy(fpu->fpcntl, current->thread.fpcntl, 12);
-		memcpy(fpu->fpregs, current->thread.fp, 96);
-		/* Convert internal fpu reg representation
-		 * into long double format
-		 */
-		for (i = 0; i < 24; i += 3)
-			fpu->fpregs[i] = ((fpu->fpregs[i] & 0xffff0000) << 15) |
-			                 ((fpu->fpregs[i] & 0x0000ffff) << 16);
-		return 1;
-	}
-
-	/* First dump the fpu context to avoid protocol violation.  */
-	asm volatile ("fsave %0" :: "m" (fpustate[0]) : "memory");
-	if (!CPU_IS_060 ? !fpustate[0] : !fpustate[2])
-		return 0;
-
-	if (CPU_IS_COLDFIRE) {
-		asm volatile ("fmovel %/fpiar,%0\n\t"
-			      "fmovel %/fpcr,%1\n\t"
-			      "fmovel %/fpsr,%2\n\t"
-			      "fmovemd %/fp0-%/fp7,%3"
-			      :
-			      : "m" (fpu->fpcntl[0]),
-				"m" (fpu->fpcntl[1]),
-				"m" (fpu->fpcntl[2]),
-				"m" (fpu->fpregs[0])
-			      : "memory");
-	} else {
-		asm volatile ("fmovem %/fpiar/%/fpcr/%/fpsr,%0"
-			      :
-			      : "m" (fpu->fpcntl[0])
-			      : "memory");
-		asm volatile ("fmovemx %/fp0-%/fp7,%0"
-			      :
-			      : "m" (fpu->fpregs[0])
-			      : "memory");
-	}
-
-	return 1;
-}
-EXPORT_SYMBOL(dump_fpu);
-#endif /* CONFIG_FPU */
-
-/*
- * sys_execve() executes a new program.
- */
-asmlinkage int sys_execve(const char __user *name,
-			  const char __user *const __user *argv,
-			  const char __user *const __user *envp)
-{
-	int error;
-	char * filename;
-	struct pt_regs *regs = (struct pt_regs *) &name;
-
-	filename = getname(name);
-	error = PTR_ERR(filename);
-	if (IS_ERR(filename))
-		return error;
-	error = do_execve(filename, argv, envp, regs);
-	putname(filename);
-	return error;
-}
-
-unsigned long get_wchan(struct task_struct *p)
-{
-	unsigned long fp, pc;
-	unsigned long stack_page;
-	int count = 0;
-	if (!p || p == current || p->state == TASK_RUNNING)
-		return 0;
-
-	stack_page = (unsigned long)task_stack_page(p);
-	fp = ((struct switch_stack *)p->thread.ksp)->a6;
-	do {
-		if (fp < stack_page+sizeof(struct thread_info) ||
-		    fp >= 8184+stack_page)
-			return 0;
-		pc = ((unsigned long *)fp)[1];
-		if (!in_sched_functions(pc))
-			return pc;
-		fp = *(unsigned long *) fp;
-	} while (count++ < 16);
-	return 0;
-}
diff --git a/ANDROID_3.4.5/arch/m68k/kernel/ptrace.c b/ANDROID_3.4.5/arch/m68k/kernel/ptrace.c
deleted file mode 100644
index 8b4a2222..00000000
--- a/ANDROID_3.4.5/arch/m68k/kernel/ptrace.c
+++ /dev/null
@@ -1,304 +0,0 @@
-/*
- *  linux/arch/m68k/kernel/ptrace.c
- *
- *  Copyright (C) 1994 by Hamish Macdonald
- *  Taken from linux/kernel/ptrace.c and modified for M680x0.
- *  linux/kernel/ptrace.c is by Ross Biro 1/23/92, edited by Linus Torvalds
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of
- * this archive for more details.
- */
-
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <linux/smp.h>
-#include <linux/errno.h>
-#include <linux/ptrace.h>
-#include <linux/user.h>
-#include <linux/signal.h>
-#include <linux/tracehook.h>
-
-#include <asm/uaccess.h>
-#include <asm/page.h>
-#include <asm/pgtable.h>
-#include <asm/processor.h>
-
-/*
- * does not yet catch signals sent when the child dies.
- * in exit.c or in signal.c.
- */
-
-/* determines which bits in the SR the user has access to. */
-/* 1 = access 0 = no access */
-#define SR_MASK 0x001f
-
-/* sets the trace bits. */
-#define TRACE_BITS 0xC000
-#define T1_BIT 0x8000
-#define T0_BIT 0x4000
-
-/* Find the stack offset for a register, relative to thread.esp0. */
-#define PT_REG(reg)	((long)&((struct pt_regs *)0)->reg)
-#define SW_REG(reg)	((long)&((struct switch_stack *)0)->reg \
-			 - sizeof(struct switch_stack))
-/* Mapping from PT_xxx to the stack offset at which the register is
-   saved.  Notice that usp has no stack-slot and needs to be treated
-   specially (see get_reg/put_reg below). */
-static const int regoff[] = {
-	[0]	= PT_REG(d1),
-	[1]	= PT_REG(d2),
-	[2]	= PT_REG(d3),
-	[3]	= PT_REG(d4),
-	[4]	= PT_REG(d5),
-	[5]	= SW_REG(d6),
-	[6]	= SW_REG(d7),
-	[7]	= PT_REG(a0),
-	[8]	= PT_REG(a1),
-	[9]	= PT_REG(a2),
-	[10]	= SW_REG(a3),
-	[11]	= SW_REG(a4),
-	[12]	= SW_REG(a5),
-	[13]	= SW_REG(a6),
-	[14]	= PT_REG(d0),
-	[15]	= -1,
-	[16]	= PT_REG(orig_d0),
-	[17]	= PT_REG(sr),
-	[18]	= PT_REG(pc),
-};
-
-/*
- * Get contents of register REGNO in task TASK.
- */
-static inline long get_reg(struct task_struct *task, int regno)
-{
-	unsigned long *addr;
-
-	if (regno == PT_USP)
-		addr = &task->thread.usp;
-	else if (regno < ARRAY_SIZE(regoff))
-		addr = (unsigned long *)(task->thread.esp0 + regoff[regno]);
-	else
-		return 0;
-	/* Need to take stkadj into account. */
-	if (regno == PT_SR || regno == PT_PC) {
-		long stkadj = *(long *)(task->thread.esp0 + PT_REG(stkadj));
-		addr = (unsigned long *) ((unsigned long)addr + stkadj);
-		/* The sr is actually a 16 bit register.  */
-		if (regno == PT_SR)
-			return *(unsigned short *)addr;
-	}
-	return *addr;
-}
-
-/*
- * Write contents of register REGNO in task TASK.
- */
-static inline int put_reg(struct task_struct *task, int regno,
-			  unsigned long data)
-{
-	unsigned long *addr;
-
-	if (regno == PT_USP)
-		addr = &task->thread.usp;
-	else if (regno < ARRAY_SIZE(regoff))
-		addr = (unsigned long *)(task->thread.esp0 + regoff[regno]);
-	else
-		return -1;
-	/* Need to take stkadj into account. */
-	if (regno == PT_SR || regno == PT_PC) {
-		long stkadj = *(long *)(task->thread.esp0 + PT_REG(stkadj));
-		addr = (unsigned long *) ((unsigned long)addr + stkadj);
-		/* The sr is actually a 16 bit register.  */
-		if (regno == PT_SR) {
-			*(unsigned short *)addr = data;
-			return 0;
-		}
-	}
-	*addr = data;
-	return 0;
-}
-
-/*
- * Make sure the single step bit is not set.
- */
-static inline void singlestep_disable(struct task_struct *child)
-{
-	unsigned long tmp = get_reg(child, PT_SR) & ~TRACE_BITS;
-	put_reg(child, PT_SR, tmp);
-	clear_tsk_thread_flag(child, TIF_DELAYED_TRACE);
-}
-
-/*
- * Called by kernel/ptrace.c when detaching..
- */
-void ptrace_disable(struct task_struct *child)
-{
-	singlestep_disable(child);
-}
-
-void user_enable_single_step(struct task_struct *child)
-{
-	unsigned long tmp = get_reg(child, PT_SR) & ~TRACE_BITS;
-	put_reg(child, PT_SR, tmp | T1_BIT);
-	set_tsk_thread_flag(child, TIF_DELAYED_TRACE);
-}
-
-#ifdef CONFIG_MMU
-void user_enable_block_step(struct task_struct *child)
-{
-	unsigned long tmp = get_reg(child, PT_SR) & ~TRACE_BITS;
-	put_reg(child, PT_SR, tmp | T0_BIT);
-}
-#endif
-
-void user_disable_single_step(struct task_struct *child)
-{
-	singlestep_disable(child);
-}
-
-long arch_ptrace(struct task_struct *child, long request,
-		 unsigned long addr, unsigned long data)
-{
-	unsigned long tmp;
-	int i, ret = 0;
-	int regno = addr >> 2; /* temporary hack. */
-	unsigned long __user *datap = (unsigned long __user *) data;
-
-	switch (request) {
-	/* read the word at location addr in the USER area. */
-	case PTRACE_PEEKUSR:
-		if (addr & 3)
-			goto out_eio;
-
-		if (regno >= 0 && regno < 19) {
-			tmp = get_reg(child, regno);
-		} else if (regno >= 21 && regno < 49) {
-			tmp = child->thread.fp[regno - 21];
-			/* Convert internal fpu reg representation
-			 * into long double format
-			 */
-			if (FPU_IS_EMU && (regno < 45) && !(regno % 3))
-				tmp = ((tmp & 0xffff0000) << 15) |
-				      ((tmp & 0x0000ffff) << 16);
-#ifndef CONFIG_MMU
-		} else if (regno == 49) {
-			tmp = child->mm->start_code;
-		} else if (regno == 50) {
-			tmp = child->mm->start_data;
-		} else if (regno == 51) {
-			tmp = child->mm->end_code;
-#endif
-		} else
-			goto out_eio;
-		ret = put_user(tmp, datap);
-		break;
-
-	case PTRACE_POKEUSR:
-	/* write the word at location addr in the USER area */
-		if (addr & 3)
-			goto out_eio;
-
-		if (regno == PT_SR) {
-			data &= SR_MASK;
-			data |= get_reg(child, PT_SR) & ~SR_MASK;
-		}
-		if (regno >= 0 && regno < 19) {
-			if (put_reg(child, regno, data))
-				goto out_eio;
-		} else if (regno >= 21 && regno < 48) {
-			/* Convert long double format
-			 * into internal fpu reg representation
-			 */
-			if (FPU_IS_EMU && (regno < 45) && !(regno % 3)) {
-				data <<= 15;
-				data = (data & 0xffff0000) |
-				       ((data & 0x0000ffff) >> 1);
-			}
-			child->thread.fp[regno - 21] = data;
-		} else
-			goto out_eio;
-		break;
-
-	case PTRACE_GETREGS:	/* Get all gp regs from the child. */
-		for (i = 0; i < 19; i++) {
-			tmp = get_reg(child, i);
-			ret = put_user(tmp, datap);
-			if (ret)
-				break;
-			datap++;
-		}
-		break;
-
-	case PTRACE_SETREGS:	/* Set all gp regs in the child. */
-		for (i = 0; i < 19; i++) {
-			ret = get_user(tmp, datap);
-			if (ret)
-				break;
-			if (i == PT_SR) {
-				tmp &= SR_MASK;
-				tmp |= get_reg(child, PT_SR) & ~SR_MASK;
-			}
-			put_reg(child, i, tmp);
-			datap++;
-		}
-		break;
-
-	case PTRACE_GETFPREGS:	/* Get the child FPU state. */
-		if (copy_to_user(datap, &child->thread.fp,
-				 sizeof(struct user_m68kfp_struct)))
-			ret = -EFAULT;
-		break;
-
-	case PTRACE_SETFPREGS:	/* Set the child FPU state. */
-		if (copy_from_user(&child->thread.fp, datap,
-				   sizeof(struct user_m68kfp_struct)))
-			ret = -EFAULT;
-		break;
-
-	case PTRACE_GET_THREAD_AREA:
-		ret = put_user(task_thread_info(child)->tp_value, datap);
-		break;
-
-	default:
-		ret = ptrace_request(child, request, addr, data);
-		break;
-	}
-
-	return ret;
-out_eio:
-	return -EIO;
-}
-
-asmlinkage void syscall_trace(void)
-{
-	ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD)
-				 ? 0x80 : 0));
-	/*
-	 * this isn't the same as continuing with a signal, but it will do
-	 * for normal use.  strace only continues with a signal if the
-	 * stopping signal is not SIGTRAP.  -brl
-	 */
-	if (current->exit_code) {
-		send_sig(current->exit_code, current, 1);
-		current->exit_code = 0;
-	}
-}
-
-#ifdef CONFIG_COLDFIRE
-asmlinkage int syscall_trace_enter(void)
-{
-	int ret = 0;
-
-	if (test_thread_flag(TIF_SYSCALL_TRACE))
-		ret = tracehook_report_syscall_entry(task_pt_regs(current));
-	return ret;
-}
-
-asmlinkage void syscall_trace_leave(void)
-{
-	if (test_thread_flag(TIF_SYSCALL_TRACE))
-		tracehook_report_syscall_exit(task_pt_regs(current), 0);
-}
-#endif /* CONFIG_COLDFIRE */
diff --git a/ANDROID_3.4.5/arch/m68k/kernel/setup.c b/ANDROID_3.4.5/arch/m68k/kernel/setup.c
deleted file mode 100644
index 4bf129f1..00000000
--- a/ANDROID_3.4.5/arch/m68k/kernel/setup.c
+++ /dev/null
@@ -1,5 +0,0 @@
-#ifdef CONFIG_MMU
-#include "setup_mm.c"
-#else
-#include "setup_no.c"
-#endif
diff --git a/ANDROID_3.4.5/arch/m68k/kernel/setup_mm.c b/ANDROID_3.4.5/arch/m68k/kernel/setup_mm.c
deleted file mode 100644
index d872ce48..00000000
--- a/ANDROID_3.4.5/arch/m68k/kernel/setup_mm.c
+++ /dev/null
@@ -1,553 +0,0 @@
-/*
- *  linux/arch/m68k/kernel/setup.c
- *
- *  Copyright (C) 1995  Hamish Macdonald
- */
-
-/*
- * This file handles the architecture-dependent parts of system setup
- */
-
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/fs.h>
-#include <linux/console.h>
-#include <linux/genhd.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/init.h>
-#include <linux/bootmem.h>
-#include <linux/proc_fs.h>
-#include <linux/seq_file.h>
-#include <linux/module.h>
-#include <linux/initrd.h>
-
-#include <asm/bootinfo.h>
-#include <asm/sections.h>
-#include <asm/setup.h>
-#include <asm/fpu.h>
-#include <asm/irq.h>
-#include <asm/io.h>
-#include <asm/machdep.h>
-#ifdef CONFIG_AMIGA
-#include <asm/amigahw.h>
-#endif
-#ifdef CONFIG_ATARI
-#include <asm/atarihw.h>
-#include <asm/atari_stram.h>
-#endif
-#ifdef CONFIG_SUN3X
-#include <asm/dvma.h>
-#endif
-#include <asm/natfeat.h>
-
-#if !FPSTATESIZE || !NR_IRQS
-#warning No CPU/platform type selected, your kernel will not work!
-#warning Are you building an allnoconfig kernel?
-#endif
-
-unsigned long m68k_machtype;
-EXPORT_SYMBOL(m68k_machtype);
-unsigned long m68k_cputype;
-EXPORT_SYMBOL(m68k_cputype);
-unsigned long m68k_fputype;
-unsigned long m68k_mmutype;
-EXPORT_SYMBOL(m68k_mmutype);
-#ifdef CONFIG_VME
-unsigned long vme_brdtype;
-EXPORT_SYMBOL(vme_brdtype);
-#endif
-
-int m68k_is040or060;
-EXPORT_SYMBOL(m68k_is040or060);
-
-extern unsigned long availmem;
-
-int m68k_num_memory;
-EXPORT_SYMBOL(m68k_num_memory);
-int m68k_realnum_memory;
-EXPORT_SYMBOL(m68k_realnum_memory);
-unsigned long m68k_memoffset;
-struct mem_info m68k_memory[NUM_MEMINFO];
-EXPORT_SYMBOL(m68k_memory);
-
-struct mem_info m68k_ramdisk;
-
-static char m68k_command_line[CL_SIZE];
-
-void (*mach_sched_init) (irq_handler_t handler) __initdata = NULL;
-/* machine dependent irq functions */
-void (*mach_init_IRQ) (void) __initdata = NULL;
-void (*mach_get_model) (char *model);
-void (*mach_get_hardware_list) (struct seq_file *m);
-/* machine dependent timer functions */
-unsigned long (*mach_gettimeoffset) (void);
-int (*mach_hwclk) (int, struct rtc_time*);
-EXPORT_SYMBOL(mach_hwclk);
-int (*mach_set_clock_mmss) (unsigned long);
-unsigned int (*mach_get_ss)(void);
-int (*mach_get_rtc_pll)(struct rtc_pll_info *);
-int (*mach_set_rtc_pll)(struct rtc_pll_info *);
-EXPORT_SYMBOL(mach_get_ss);
-EXPORT_SYMBOL(mach_get_rtc_pll);
-EXPORT_SYMBOL(mach_set_rtc_pll);
-void (*mach_reset)( void );
-void (*mach_halt)( void );
-void (*mach_power_off)( void );
-long mach_max_dma_address = 0x00ffffff; /* default set to the lower 16MB */
-#ifdef CONFIG_HEARTBEAT
-void (*mach_heartbeat) (int);
-EXPORT_SYMBOL(mach_heartbeat);
-#endif
-#ifdef CONFIG_M68K_L2_CACHE
-void (*mach_l2_flush) (int);
-#endif
-#if defined(CONFIG_INPUT_M68K_BEEP) || defined(CONFIG_INPUT_M68K_BEEP_MODULE)
-void (*mach_beep)(unsigned int, unsigned int);
-EXPORT_SYMBOL(mach_beep);
-#endif
-#if defined(CONFIG_ISA) && defined(MULTI_ISA)
-int isa_type;
-int isa_sex;
-EXPORT_SYMBOL(isa_type);
-EXPORT_SYMBOL(isa_sex);
-#endif
-
-extern int amiga_parse_bootinfo(const struct bi_record *);
-extern int atari_parse_bootinfo(const struct bi_record *);
-extern int mac_parse_bootinfo(const struct bi_record *);
-extern int q40_parse_bootinfo(const struct bi_record *);
-extern int bvme6000_parse_bootinfo(const struct bi_record *);
-extern int mvme16x_parse_bootinfo(const struct bi_record *);
-extern int mvme147_parse_bootinfo(const struct bi_record *);
-extern int hp300_parse_bootinfo(const struct bi_record *);
-extern int apollo_parse_bootinfo(const struct bi_record *);
-
-extern void config_amiga(void);
-extern void config_atari(void);
-extern void config_mac(void);
-extern void config_sun3(void);
-extern void config_apollo(void);
-extern void config_mvme147(void);
-extern void config_mvme16x(void);
-extern void config_bvme6000(void);
-extern void config_hp300(void);
-extern void config_q40(void);
-extern void config_sun3x(void);
-
-#define MASK_256K 0xfffc0000
-
-extern void paging_init(void);
-
-static void __init m68k_parse_bootinfo(const struct bi_record *record)
-{
-	while (record->tag != BI_LAST) {
-		int unknown = 0;
-		const unsigned long *data = record->data;
-
-		switch (record->tag) {
-		case BI_MACHTYPE:
-		case BI_CPUTYPE:
-		case BI_FPUTYPE:
-		case BI_MMUTYPE:
-			/* Already set up by head.S */
-			break;
-
-		case BI_MEMCHUNK:
-			if (m68k_num_memory < NUM_MEMINFO) {
-				m68k_memory[m68k_num_memory].addr = data[0];
-				m68k_memory[m68k_num_memory].size = data[1];
-				m68k_num_memory++;
-			} else
-				printk("m68k_parse_bootinfo: too many memory chunks\n");
-			break;
-
-		case BI_RAMDISK:
-			m68k_ramdisk.addr = data[0];
-			m68k_ramdisk.size = data[1];
-			break;
-
-		case BI_COMMAND_LINE:
-			strlcpy(m68k_command_line, (const char *)data,
-				sizeof(m68k_command_line));
-			break;
-
-		default:
-			if (MACH_IS_AMIGA)
-				unknown = amiga_parse_bootinfo(record);
-			else if (MACH_IS_ATARI)
-				unknown = atari_parse_bootinfo(record);
-			else if (MACH_IS_MAC)
-				unknown = mac_parse_bootinfo(record);
-			else if (MACH_IS_Q40)
-				unknown = q40_parse_bootinfo(record);
-			else if (MACH_IS_BVME6000)
-				unknown = bvme6000_parse_bootinfo(record);
-			else if (MACH_IS_MVME16x)
-				unknown = mvme16x_parse_bootinfo(record);
-			else if (MACH_IS_MVME147)
-				unknown = mvme147_parse_bootinfo(record);
-			else if (MACH_IS_HP300)
-				unknown = hp300_parse_bootinfo(record);
-			else if (MACH_IS_APOLLO)
-				unknown = apollo_parse_bootinfo(record);
-			else
-				unknown = 1;
-		}
-		if (unknown)
-			printk("m68k_parse_bootinfo: unknown tag 0x%04x ignored\n",
-			       record->tag);
-		record = (struct bi_record *)((unsigned long)record +
-					      record->size);
-	}
-
-	m68k_realnum_memory = m68k_num_memory;
-#ifdef CONFIG_SINGLE_MEMORY_CHUNK
-	if (m68k_num_memory > 1) {
-		printk("Ignoring last %i chunks of physical memory\n",
-		       (m68k_num_memory - 1));
-		m68k_num_memory = 1;
-	}
-#endif
-}
-
-void __init setup_arch(char **cmdline_p)
-{
-#ifndef CONFIG_SUN3
-	int i;
-#endif
-
-	/* The bootinfo is located right after the kernel bss */
-	if (!CPU_IS_COLDFIRE)
-		m68k_parse_bootinfo((const struct bi_record *)_end);
-
-	if (CPU_IS_040)
-		m68k_is040or060 = 4;
-	else if (CPU_IS_060)
-		m68k_is040or060 = 6;
-
-	/* FIXME: m68k_fputype is passed in by Penguin booter, which can
-	 * be confused by software FPU emulation. BEWARE.
-	 * We should really do our own FPU check at startup.
-	 * [what do we do with buggy 68LC040s? if we have problems
-	 *  with them, we should add a test to check_bugs() below] */
-#ifndef CONFIG_M68KFPU_EMU_ONLY
-	/* clear the fpu if we have one */
-	if (m68k_fputype & (FPU_68881|FPU_68882|FPU_68040|FPU_68060|FPU_COLDFIRE)) {
-		volatile int zero = 0;
-		asm volatile ("frestore %0" : : "m" (zero));
-	}
-#endif
-
-	if (CPU_IS_060) {
-		u32 pcr;
-
-		asm (".chip 68060; movec %%pcr,%0; .chip 68k"
-		     : "=d" (pcr));
-		if (((pcr >> 8) & 0xff) <= 5) {
-			printk("Enabling workaround for errata I14\n");
-			asm (".chip 68060; movec %0,%%pcr; .chip 68k"
-			     : : "d" (pcr | 0x20));
-		}
-	}
-
-	init_mm.start_code = PAGE_OFFSET;
-	init_mm.end_code = (unsigned long)_etext;
-	init_mm.end_data = (unsigned long)_edata;
-	init_mm.brk = (unsigned long)_end;
-
-#if defined(CONFIG_BOOTPARAM)
-	strncpy(m68k_command_line, CONFIG_BOOTPARAM_STRING, CL_SIZE);
-	m68k_command_line[CL_SIZE - 1] = 0;
-#endif /* CONFIG_BOOTPARAM */
-	*cmdline_p = m68k_command_line;
-	memcpy(boot_command_line, *cmdline_p, CL_SIZE);
-
-	parse_early_param();
-
-#ifdef CONFIG_DUMMY_CONSOLE
-	conswitchp = &dummy_con;
-#endif
-
-	switch (m68k_machtype) {
-#ifdef CONFIG_AMIGA
-	case MACH_AMIGA:
-		config_amiga();
-		break;
-#endif
-#ifdef CONFIG_ATARI
-	case MACH_ATARI:
-		config_atari();
-		break;
-#endif
-#ifdef CONFIG_MAC
-	case MACH_MAC:
-		config_mac();
-		break;
-#endif
-#ifdef CONFIG_SUN3
-	case MACH_SUN3:
-		config_sun3();
-		break;
-#endif
-#ifdef CONFIG_APOLLO
-	case MACH_APOLLO:
-		config_apollo();
-		break;
-#endif
-#ifdef CONFIG_MVME147
-	case MACH_MVME147:
-		config_mvme147();
-		break;
-#endif
-#ifdef CONFIG_MVME16x
-	case MACH_MVME16x:
-		config_mvme16x();
-		break;
-#endif
-#ifdef CONFIG_BVME6000
-	case MACH_BVME6000:
-		config_bvme6000();
-		break;
-#endif
-#ifdef CONFIG_HP300
-	case MACH_HP300:
-		config_hp300();
-		break;
-#endif
-#ifdef CONFIG_Q40
-	case MACH_Q40:
-		config_q40();
-		break;
-#endif
-#ifdef CONFIG_SUN3X
-	case MACH_SUN3X:
-		config_sun3x();
-		break;
-#endif
-#ifdef CONFIG_COLDFIRE
-	case MACH_M54XX:
-		config_BSP(NULL, 0);
-		break;
-#endif
-	default:
-		panic("No configuration setup");
-	}
-
-#ifdef CONFIG_NATFEAT
-	nf_init();
-#endif
-
-	paging_init();
-
-#ifndef CONFIG_SUN3
-	for (i = 1; i < m68k_num_memory; i++)
-		free_bootmem_node(NODE_DATA(i), m68k_memory[i].addr,
-				  m68k_memory[i].size);
-#ifdef CONFIG_BLK_DEV_INITRD
-	if (m68k_ramdisk.size) {
-		reserve_bootmem_node(__virt_to_node(phys_to_virt(m68k_ramdisk.addr)),
-				     m68k_ramdisk.addr, m68k_ramdisk.size,
-				     BOOTMEM_DEFAULT);
-		initrd_start = (unsigned long)phys_to_virt(m68k_ramdisk.addr);
-		initrd_end = initrd_start + m68k_ramdisk.size;
-		printk("initrd: %08lx - %08lx\n", initrd_start, initrd_end);
-	}
-#endif
-
-#ifdef CONFIG_ATARI
-	if (MACH_IS_ATARI)
-		atari_stram_reserve_pages((void *)availmem);
-#endif
-#ifdef CONFIG_SUN3X
-	if (MACH_IS_SUN3X) {
-		dvma_init();
-	}
-#endif
-
-#endif /* !CONFIG_SUN3 */
-
-/* set ISA defs early as possible */
-#if defined(CONFIG_ISA) && defined(MULTI_ISA)
-	if (MACH_IS_Q40) {
-		isa_type = ISA_TYPE_Q40;
-		isa_sex = 0;
-	}
-#ifdef CONFIG_AMIGA_PCMCIA
-	if (MACH_IS_AMIGA && AMIGAHW_PRESENT(PCMCIA)) {
-		isa_type = ISA_TYPE_AG;
-		isa_sex = 1;
-	}
-#endif
-#endif
-}
-
-static int show_cpuinfo(struct seq_file *m, void *v)
-{
-	const char *cpu, *mmu, *fpu;
-	unsigned long clockfreq, clockfactor;
-
-#define LOOP_CYCLES_68020	(8)
-#define LOOP_CYCLES_68030	(8)
-#define LOOP_CYCLES_68040	(3)
-#define LOOP_CYCLES_68060	(1)
-#define LOOP_CYCLES_COLDFIRE	(2)
-
-	if (CPU_IS_020) {
-		cpu = "68020";
-		clockfactor = LOOP_CYCLES_68020;
-	} else if (CPU_IS_030) {
-		cpu = "68030";
-		clockfactor = LOOP_CYCLES_68030;
-	} else if (CPU_IS_040) {
-		cpu = "68040";
-		clockfactor = LOOP_CYCLES_68040;
-	} else if (CPU_IS_060) {
-		cpu = "68060";
-		clockfactor = LOOP_CYCLES_68060;
-	} else if (CPU_IS_COLDFIRE) {
-		cpu = "ColdFire";
-		clockfactor = LOOP_CYCLES_COLDFIRE;
-	} else {
-		cpu = "680x0";
-		clockfactor = 0;
-	}
-
-#ifdef CONFIG_M68KFPU_EMU_ONLY
-	fpu = "none(soft float)";
-#else
-	if (m68k_fputype & FPU_68881)
-		fpu = "68881";
-	else if (m68k_fputype & FPU_68882)
-		fpu = "68882";
-	else if (m68k_fputype & FPU_68040)
-		fpu = "68040";
-	else if (m68k_fputype & FPU_68060)
-		fpu = "68060";
-	else if (m68k_fputype & FPU_SUNFPA)
-		fpu = "Sun FPA";
-	else if (m68k_fputype & FPU_COLDFIRE)
-		fpu = "ColdFire";
-	else
-		fpu = "none";
-#endif
-
-	if (m68k_mmutype & MMU_68851)
-		mmu = "68851";
-	else if (m68k_mmutype & MMU_68030)
-		mmu = "68030";
-	else if (m68k_mmutype & MMU_68040)
-		mmu = "68040";
-	else if (m68k_mmutype & MMU_68060)
-		mmu = "68060";
-	else if (m68k_mmutype & MMU_SUN3)
-		mmu = "Sun-3";
-	else if (m68k_mmutype & MMU_APOLLO)
-		mmu = "Apollo";
-	else if (m68k_mmutype & MMU_COLDFIRE)
-		mmu = "ColdFire";
-	else
-		mmu = "unknown";
-
-	clockfreq = loops_per_jiffy * HZ * clockfactor;
-
-	seq_printf(m, "CPU:\t\t%s\n"
-		   "MMU:\t\t%s\n"
-		   "FPU:\t\t%s\n"
-		   "Clocking:\t%lu.%1luMHz\n"
-		   "BogoMips:\t%lu.%02lu\n"
-		   "Calibration:\t%lu loops\n",
-		   cpu, mmu, fpu,
-		   clockfreq/1000000,(clockfreq/100000)%10,
-		   loops_per_jiffy/(500000/HZ),(loops_per_jiffy/(5000/HZ))%100,
-		   loops_per_jiffy);
-	return 0;
-}
-
-static void *c_start(struct seq_file *m, loff_t *pos)
-{
-	return *pos < 1 ? (void *)1 : NULL;
-}
-static void *c_next(struct seq_file *m, void *v, loff_t *pos)
-{
-	++*pos;
-	return NULL;
-}
-static void c_stop(struct seq_file *m, void *v)
-{
-}
-const struct seq_operations cpuinfo_op = {
-	.start	= c_start,
-	.next	= c_next,
-	.stop	= c_stop,
-	.show	= show_cpuinfo,
-};
-
-#ifdef CONFIG_PROC_HARDWARE
-static int hardware_proc_show(struct seq_file *m, void *v)
-{
-	char model[80];
-	unsigned long mem;
-	int i;
-
-	if (mach_get_model)
-		mach_get_model(model);
-	else
-		strcpy(model, "Unknown m68k");
-
-	seq_printf(m, "Model:\t\t%s\n", model);
-	for (mem = 0, i = 0; i < m68k_num_memory; i++)
-		mem += m68k_memory[i].size;
-	seq_printf(m, "System Memory:\t%ldK\n", mem >> 10);
-
-	if (mach_get_hardware_list)
-		mach_get_hardware_list(m);
-
-	return 0;
-}
-
-static int hardware_proc_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, hardware_proc_show, NULL);
-}
-
-static const struct file_operations hardware_proc_fops = {
-	.open		= hardware_proc_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-};
-
-static int __init proc_hardware_init(void)
-{
-	proc_create("hardware", 0, NULL, &hardware_proc_fops);
-	return 0;
-}
-module_init(proc_hardware_init);
-#endif
-
-void check_bugs(void)
-{
-#ifndef CONFIG_M68KFPU_EMU
-	if (m68k_fputype == 0) {
-		printk(KERN_EMERG "*** YOU DO NOT HAVE A FLOATING POINT UNIT, "
-			"WHICH IS REQUIRED BY LINUX/M68K ***\n");
-		printk(KERN_EMERG "Upgrade your hardware or join the FPU "
-			"emulation project\n");
-		panic("no FPU");
-	}
-#endif /* !CONFIG_M68KFPU_EMU */
-}
-
-#ifdef CONFIG_ADB
-static int __init adb_probe_sync_enable (char *str) {
-	extern int __adb_probe_sync;
-	__adb_probe_sync = 1;
-	return 1;
-}
-
-__setup("adb_sync", adb_probe_sync_enable);
-#endif /* CONFIG_ADB */
diff --git a/ANDROID_3.4.5/arch/m68k/kernel/setup_no.c b/ANDROID_3.4.5/arch/m68k/kernel/setup_no.c
deleted file mode 100644
index 7dc186b7..00000000
--- a/ANDROID_3.4.5/arch/m68k/kernel/setup_no.c
+++ /dev/null
@@ -1,317 +0,0 @@
-/*
- *  linux/arch/m68knommu/kernel/setup.c
- *
- *  Copyright (C) 1999-2007  Greg Ungerer (gerg@snapgear.com)
- *  Copyright (C) 1998,1999  D. Jeff Dionne <jeff@uClinux.org>
- *  Copyleft  ()) 2000       James D. Schettine {james@telos-systems.com}
- *  Copyright (C) 1998       Kenneth Albanowski <kjahds@kjahds.com>
- *  Copyright (C) 1995       Hamish Macdonald
- *  Copyright (C) 2000       Lineo Inc. (www.lineo.com)
- *  Copyright (C) 2001 	     Lineo, Inc. <www.lineo.com>
- *
- *  68VZ328 Fixes/support    Evan Stawnyczy <e@lineo.ca>
- */
-
-/*
- * This file handles the architecture-dependent parts of system setup
- */
-
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/fb.h>
-#include <linux/module.h>
-#include <linux/mm.h>
-#include <linux/console.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/bootmem.h>
-#include <linux/seq_file.h>
-#include <linux/init.h>
-#include <linux/initrd.h>
-#include <linux/root_dev.h>
-#include <linux/rtc.h>
-
-#include <asm/setup.h>
-#include <asm/irq.h>
-#include <asm/machdep.h>
-#include <asm/pgtable.h>
-#include <asm/sections.h>
-
-unsigned long memory_start;
-unsigned long memory_end;
-
-EXPORT_SYMBOL(memory_start);
-EXPORT_SYMBOL(memory_end);
-
-char __initdata command_line[COMMAND_LINE_SIZE];
-
-/* machine dependent timer functions */
-void (*mach_sched_init)(irq_handler_t handler) __initdata = NULL;
-int (*mach_set_clock_mmss)(unsigned long);
-int (*mach_hwclk) (int, struct rtc_time*);
-
-/* machine dependent reboot functions */
-void (*mach_reset)(void);
-void (*mach_halt)(void);
-void (*mach_power_off)(void);
-
-#ifdef CONFIG_M68328
-#define CPU_NAME	"MC68328"
-#endif
-#ifdef CONFIG_M68EZ328
-#define CPU_NAME	"MC68EZ328"
-#endif
-#ifdef CONFIG_M68VZ328
-#define CPU_NAME	"MC68VZ328"
-#endif
-#ifdef CONFIG_M68360
-#define CPU_NAME	"MC68360"
-#endif
-#ifndef CPU_NAME
-#define	CPU_NAME	"UNKNOWN"
-#endif
-
-/*
- * Different cores have different instruction execution timings.
- * The old/traditional 68000 cores are basically all the same, at 16.
- * The ColdFire cores vary a little, their values are defined in their
- * headers. We default to the standard 68000 value here.
- */
-#ifndef CPU_INSTR_PER_JIFFY
-#define	CPU_INSTR_PER_JIFFY	16
-#endif
-
-#if defined(CONFIG_UBOOT)
-/*
- * parse_uboot_commandline
- *
- * Copies u-boot commandline arguments and store them in the proper linux
- * variables.
- *
- * Assumes:
- *	_init_sp global contains the address in the stack pointer when the
- *	kernel starts (see head.S::_start)
- *
- *	U-Boot calling convention:
- *	(*kernel) (kbd, initrd_start, initrd_end, cmd_start, cmd_end);
- *
- *	_init_sp can be parsed as such
- *
- *	_init_sp+00 = u-boot cmd after jsr into kernel (skip)
- *	_init_sp+04 = &kernel board_info (residual data)
- *	_init_sp+08 = &initrd_start
- *	_init_sp+12 = &initrd_end
- *	_init_sp+16 = &cmd_start
- *	_init_sp+20 = &cmd_end
- *
- *	This also assumes that the memory locations pointed to are still
- *	unmodified. U-boot places them near the end of external SDRAM.
- *
- * Argument(s):
- *	commandp = the linux commandline arg container to fill.
- *	size     = the sizeof commandp.
- *
- * Returns:
- */
-void parse_uboot_commandline(char *commandp, int size)
-{
-	extern unsigned long _init_sp;
-	unsigned long *sp;
-	unsigned long uboot_kbd;
-	unsigned long uboot_initrd_start, uboot_initrd_end;
-	unsigned long uboot_cmd_start, uboot_cmd_end;
-
-
-	sp = (unsigned long *)_init_sp;
-	uboot_kbd = sp[1];
-	uboot_initrd_start = sp[2];
-	uboot_initrd_end = sp[3];
-	uboot_cmd_start = sp[4];
-	uboot_cmd_end = sp[5];
-
-	if (uboot_cmd_start && uboot_cmd_end)
-		strncpy(commandp, (const char *)uboot_cmd_start, size);
-#if defined(CONFIG_BLK_DEV_INITRD)
-	if (uboot_initrd_start && uboot_initrd_end &&
-		(uboot_initrd_end > uboot_initrd_start)) {
-		initrd_start = uboot_initrd_start;
-		initrd_end = uboot_initrd_end;
-		ROOT_DEV = Root_RAM0;
-		printk(KERN_INFO "initrd at 0x%lx:0x%lx\n",
-			initrd_start, initrd_end);
-	}
-#endif /* if defined(CONFIG_BLK_DEV_INITRD) */
-}
-#endif /* #if defined(CONFIG_UBOOT) */
-
-void __init setup_arch(char **cmdline_p)
-{
-	int bootmap_size;
-
-	memory_start = PAGE_ALIGN(_ramstart);
-	memory_end = _ramend;
-
-	init_mm.start_code = (unsigned long) &_stext;
-	init_mm.end_code = (unsigned long) &_etext;
-	init_mm.end_data = (unsigned long) &_edata;
-	init_mm.brk = (unsigned long) 0;
-
-	config_BSP(&command_line[0], sizeof(command_line));
-
-#if defined(CONFIG_BOOTPARAM)
-	strncpy(&command_line[0], CONFIG_BOOTPARAM_STRING, sizeof(command_line));
-	command_line[sizeof(command_line) - 1] = 0;
-#endif /* CONFIG_BOOTPARAM */
-
-#if defined(CONFIG_UBOOT)
-	/* CONFIG_UBOOT and CONFIG_BOOTPARAM defined, concatenate cmdline */
-	#if defined(CONFIG_BOOTPARAM)
-		/* Add the whitespace separator */
-		command_line[strlen(CONFIG_BOOTPARAM_STRING)] = ' ';
-		/* Parse uboot command line into the rest of the buffer */
-		parse_uboot_commandline(
-			&command_line[(strlen(CONFIG_BOOTPARAM_STRING)+1)],
-			(sizeof(command_line) -
-			(strlen(CONFIG_BOOTPARAM_STRING)+1)));
-	/* Only CONFIG_UBOOT defined, create cmdline */
-	#else
-		parse_uboot_commandline(&command_line[0], sizeof(command_line));
-	#endif /* CONFIG_BOOTPARAM */
-	command_line[sizeof(command_line) - 1] = 0;
-#endif /* CONFIG_UBOOT */
-
-	printk(KERN_INFO "\x0F\r\n\nuClinux/" CPU_NAME "\n");
-
-#ifdef CONFIG_UCDIMM
-	printk(KERN_INFO "uCdimm by Lineo, Inc. <www.lineo.com>\n");
-#endif
-#ifdef CONFIG_M68VZ328
-	printk(KERN_INFO "M68VZ328 support by Evan Stawnyczy <e@lineo.ca>\n");
-#endif
-#ifdef CONFIG_COLDFIRE
-	printk(KERN_INFO "COLDFIRE port done by Greg Ungerer, gerg@snapgear.com\n");
-#ifdef CONFIG_M5307
-	printk(KERN_INFO "Modified for M5307 by Dave Miller, dmiller@intellistor.com\n");
-#endif
-#ifdef CONFIG_ELITE
-	printk(KERN_INFO "Modified for M5206eLITE by Rob Scott, rscott@mtrob.fdns.net\n");
-#endif
-#endif
-	printk(KERN_INFO "Flat model support (C) 1998,1999 Kenneth Albanowski, D. Jeff Dionne\n");
-
-#if defined( CONFIG_PILOT ) && defined( CONFIG_M68328 )
-	printk(KERN_INFO "TRG SuperPilot FLASH card support <info@trgnet.com>\n");
-#endif
-#if defined( CONFIG_PILOT ) && defined( CONFIG_M68EZ328 )
-	printk(KERN_INFO "PalmV support by Lineo Inc. <jeff@uclinux.com>\n");
-#endif
-#if defined (CONFIG_M68360)
-	printk(KERN_INFO "QUICC port done by SED Systems <hamilton@sedsystems.ca>,\n");
-	printk(KERN_INFO "based on 2.0.38 port by Lineo Inc. <mleslie@lineo.com>.\n");
-#endif
-#ifdef CONFIG_DRAGEN2
-	printk(KERN_INFO "DragonEngine II board support by Georges Menie\n");
-#endif
-#ifdef CONFIG_M5235EVB
-	printk(KERN_INFO "Motorola M5235EVB support (C)2005 Syn-tech Systems, Inc. (Jate Sujjavanich)\n");
-#endif
-
-	pr_debug("KERNEL -> TEXT=0x%06x-0x%06x DATA=0x%06x-0x%06x "
-		 "BSS=0x%06x-0x%06x\n", (int) &_stext, (int) &_etext,
-		 (int) &_sdata, (int) &_edata,
-		 (int) &_sbss, (int) &_ebss);
-	pr_debug("MEMORY -> ROMFS=0x%06x-0x%06x MEM=0x%06x-0x%06x\n ",
-		 (int) &_ebss, (int) memory_start,
-		 (int) memory_start, (int) memory_end);
-
-	/* Keep a copy of command line */
-	*cmdline_p = &command_line[0];
-	memcpy(boot_command_line, command_line, COMMAND_LINE_SIZE);
-	boot_command_line[COMMAND_LINE_SIZE-1] = 0;
-
-#if defined(CONFIG_FRAMEBUFFER_CONSOLE) && defined(CONFIG_DUMMY_CONSOLE)
-	conswitchp = &dummy_con;
-#endif
-
-	/*
-	 * Give all the memory to the bootmap allocator, tell it to put the
-	 * boot mem_map at the start of memory.
-	 */
-	bootmap_size = init_bootmem_node(
-			NODE_DATA(0),
-			memory_start >> PAGE_SHIFT, /* map goes here */
-			PAGE_OFFSET >> PAGE_SHIFT,	/* 0 on coldfire */
-			memory_end >> PAGE_SHIFT);
-	/*
-	 * Free the usable memory, we have to make sure we do not free
-	 * the bootmem bitmap so we then reserve it after freeing it :-)
-	 */
-	free_bootmem(memory_start, memory_end - memory_start);
-	reserve_bootmem(memory_start, bootmap_size, BOOTMEM_DEFAULT);
-
-#if defined(CONFIG_UBOOT) && defined(CONFIG_BLK_DEV_INITRD)
-	if ((initrd_start > 0) && (initrd_start < initrd_end) &&
-			(initrd_end < memory_end))
-		reserve_bootmem(initrd_start, initrd_end - initrd_start,
-				 BOOTMEM_DEFAULT);
-#endif /* if defined(CONFIG_BLK_DEV_INITRD) */
-
-	/*
-	 * Get kmalloc into gear.
-	 */
-	paging_init();
-}
-
-/*
- *	Get CPU information for use by the procfs.
- */
-static int show_cpuinfo(struct seq_file *m, void *v)
-{
-	char *cpu, *mmu, *fpu;
-	u_long clockfreq;
-
-	cpu = CPU_NAME;
-	mmu = "none";
-	fpu = "none";
-	clockfreq = (loops_per_jiffy * HZ) * CPU_INSTR_PER_JIFFY;
-
-	seq_printf(m, "CPU:\t\t%s\n"
-		      "MMU:\t\t%s\n"
-		      "FPU:\t\t%s\n"
-		      "Clocking:\t%lu.%1luMHz\n"
-		      "BogoMips:\t%lu.%02lu\n"
-		      "Calibration:\t%lu loops\n",
-		      cpu, mmu, fpu,
-		      clockfreq / 1000000,
-		      (clockfreq / 100000) % 10,
-		      (loops_per_jiffy * HZ) / 500000,
-		      ((loops_per_jiffy * HZ) / 5000) % 100,
-		      (loops_per_jiffy * HZ));
-
-	return 0;
-}
-
-static void *c_start(struct seq_file *m, loff_t *pos)
-{
-	return *pos < NR_CPUS ? ((void *) 0x12345678) : NULL;
-}
-
-static void *c_next(struct seq_file *m, void *v, loff_t *pos)
-{
-	++*pos;
-	return c_start(m, pos);
-}
-
-static void c_stop(struct seq_file *m, void *v)
-{
-}
-
-const struct seq_operations cpuinfo_op = {
-	.start	= c_start,
-	.next	= c_next,
-	.stop	= c_stop,
-	.show	= show_cpuinfo,
-};
-
diff --git a/ANDROID_3.4.5/arch/m68k/kernel/signal.c b/ANDROID_3.4.5/arch/m68k/kernel/signal.c
deleted file mode 100644
index 2e25713e..00000000
--- a/ANDROID_3.4.5/arch/m68k/kernel/signal.c
+++ /dev/null
@@ -1,5 +0,0 @@
-#ifdef CONFIG_MMU
-#include "signal_mm.c"
-#else
-#include "signal_no.c"
-#endif
diff --git a/ANDROID_3.4.5/arch/m68k/kernel/signal_mm.c b/ANDROID_3.4.5/arch/m68k/kernel/signal_mm.c
deleted file mode 100644
index cb856f9d..00000000
--- a/ANDROID_3.4.5/arch/m68k/kernel/signal_mm.c
+++ /dev/null
@@ -1,1115 +0,0 @@
-/*
- *  linux/arch/m68k/kernel/signal.c
- *
- *  Copyright (C) 1991, 1992  Linus Torvalds
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file COPYING in the main directory of this archive
- * for more details.
- */
-
-/*
- * Linux/m68k support by Hamish Macdonald
- *
- * 68060 fixes by Jesper Skov
- *
- * 1997-12-01  Modified for POSIX.1b signals by Andreas Schwab
- *
- * mathemu support by Roman Zippel
- *  (Note: fpstate in the signal context is completely ignored for the emulator
- *         and the internal floating point format is put on stack)
- */
-
-/*
- * ++roman (07/09/96): implemented signal stacks (specially for tosemu on
- * Atari :-) Current limitation: Only one sigstack can be active at one time.
- * If a second signal with SA_ONSTACK set arrives while working on a sigstack,
- * SA_ONSTACK is ignored. This behaviour avoids lots of trouble with nested
- * signal handlers!
- */
-
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <linux/kernel.h>
-#include <linux/signal.h>
-#include <linux/syscalls.h>
-#include <linux/errno.h>
-#include <linux/wait.h>
-#include <linux/ptrace.h>
-#include <linux/unistd.h>
-#include <linux/stddef.h>
-#include <linux/highuid.h>
-#include <linux/personality.h>
-#include <linux/tty.h>
-#include <linux/binfmts.h>
-#include <linux/module.h>
-
-#include <asm/setup.h>
-#include <asm/uaccess.h>
-#include <asm/pgtable.h>
-#include <asm/traps.h>
-#include <asm/ucontext.h>
-
-#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
-
-static const int frame_extra_sizes[16] = {
-  [1]	= -1, /* sizeof(((struct frame *)0)->un.fmt1), */
-  [2]	= sizeof(((struct frame *)0)->un.fmt2),
-  [3]	= sizeof(((struct frame *)0)->un.fmt3),
-#ifdef CONFIG_COLDFIRE
-  [4]	= 0,
-#else
-  [4]	= sizeof(((struct frame *)0)->un.fmt4),
-#endif
-  [5]	= -1, /* sizeof(((struct frame *)0)->un.fmt5), */
-  [6]	= -1, /* sizeof(((struct frame *)0)->un.fmt6), */
-  [7]	= sizeof(((struct frame *)0)->un.fmt7),
-  [8]	= -1, /* sizeof(((struct frame *)0)->un.fmt8), */
-  [9]	= sizeof(((struct frame *)0)->un.fmt9),
-  [10]	= sizeof(((struct frame *)0)->un.fmta),
-  [11]	= sizeof(((struct frame *)0)->un.fmtb),
-  [12]	= -1, /* sizeof(((struct frame *)0)->un.fmtc), */
-  [13]	= -1, /* sizeof(((struct frame *)0)->un.fmtd), */
-  [14]	= -1, /* sizeof(((struct frame *)0)->un.fmte), */
-  [15]	= -1, /* sizeof(((struct frame *)0)->un.fmtf), */
-};
-
-int handle_kernel_fault(struct pt_regs *regs)
-{
-	const struct exception_table_entry *fixup;
-	struct pt_regs *tregs;
-
-	/* Are we prepared to handle this kernel fault? */
-	fixup = search_exception_tables(regs->pc);
-	if (!fixup)
-		return 0;
-
-	/* Create a new four word stack frame, discarding the old one. */
-	regs->stkadj = frame_extra_sizes[regs->format];
-	tregs =	(struct pt_regs *)((long)regs + regs->stkadj);
-	tregs->vector = regs->vector;
-#ifdef CONFIG_COLDFIRE
-	tregs->format = 4;
-#else
-	tregs->format = 0;
-#endif
-	tregs->pc = fixup->fixup;
-	tregs->sr = regs->sr;
-
-	return 1;
-}
-
-/*
- * Atomically swap in the new signal mask, and wait for a signal.
- */
-asmlinkage int
-sys_sigsuspend(int unused0, int unused1, old_sigset_t mask)
-{
-	mask &= _BLOCKABLE;
-	spin_lock_irq(&current->sighand->siglock);
-	current->saved_sigmask = current->blocked;
-	siginitset(&current->blocked, mask);
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
-
-	current->state = TASK_INTERRUPTIBLE;
-	schedule();
-	set_restore_sigmask();
-
-	return -ERESTARTNOHAND;
-}
-
-asmlinkage int
-sys_sigaction(int sig, const struct old_sigaction __user *act,
-	      struct old_sigaction __user *oact)
-{
-	struct k_sigaction new_ka, old_ka;
-	int ret;
-
-	if (act) {
-		old_sigset_t mask;
-		if (!access_ok(VERIFY_READ, act, sizeof(*act)) ||
-		    __get_user(new_ka.sa.sa_handler, &act->sa_handler) ||
-		    __get_user(new_ka.sa.sa_restorer, &act->sa_restorer) ||
-		    __get_user(new_ka.sa.sa_flags, &act->sa_flags) ||
-		    __get_user(mask, &act->sa_mask))
-			return -EFAULT;
-		siginitset(&new_ka.sa.sa_mask, mask);
-	}
-
-	ret = do_sigaction(sig, act ? &new_ka : NULL, oact ? &old_ka : NULL);
-
-	if (!ret && oact) {
-		if (!access_ok(VERIFY_WRITE, oact, sizeof(*oact)) ||
-		    __put_user(old_ka.sa.sa_handler, &oact->sa_handler) ||
-		    __put_user(old_ka.sa.sa_restorer, &oact->sa_restorer) ||
-		    __put_user(old_ka.sa.sa_flags, &oact->sa_flags) ||
-		    __put_user(old_ka.sa.sa_mask.sig[0], &oact->sa_mask))
-			return -EFAULT;
-	}
-
-	return ret;
-}
-
-asmlinkage int
-sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss)
-{
-	return do_sigaltstack(uss, uoss, rdusp());
-}
-
-
-/*
- * Do a signal return; undo the signal stack.
- *
- * Keep the return code on the stack quadword aligned!
- * That makes the cache flush below easier.
- */
-
-struct sigframe
-{
-	char __user *pretcode;
-	int sig;
-	int code;
-	struct sigcontext __user *psc;
-	char retcode[8];
-	unsigned long extramask[_NSIG_WORDS-1];
-	struct sigcontext sc;
-};
-
-struct rt_sigframe
-{
-	char __user *pretcode;
-	int sig;
-	struct siginfo __user *pinfo;
-	void __user *puc;
-	char retcode[8];
-	struct siginfo info;
-	struct ucontext uc;
-};
-
-
-static unsigned char fpu_version;	/* version number of fpu, set by setup_frame */
-
-static inline int restore_fpu_state(struct sigcontext *sc)
-{
-	int err = 1;
-
-	if (FPU_IS_EMU) {
-	    /* restore registers */
-	    memcpy(current->thread.fpcntl, sc->sc_fpcntl, 12);
-	    memcpy(current->thread.fp, sc->sc_fpregs, 24);
-	    return 0;
-	}
-
-	if (CPU_IS_060 ? sc->sc_fpstate[2] : sc->sc_fpstate[0]) {
-	    /* Verify the frame format.  */
-	    if (!(CPU_IS_060 || CPU_IS_COLDFIRE) &&
-		 (sc->sc_fpstate[0] != fpu_version))
-		goto out;
-	    if (CPU_IS_020_OR_030) {
-		if (m68k_fputype & FPU_68881 &&
-		    !(sc->sc_fpstate[1] == 0x18 || sc->sc_fpstate[1] == 0xb4))
-		    goto out;
-		if (m68k_fputype & FPU_68882 &&
-		    !(sc->sc_fpstate[1] == 0x38 || sc->sc_fpstate[1] == 0xd4))
-		    goto out;
-	    } else if (CPU_IS_040) {
-		if (!(sc->sc_fpstate[1] == 0x00 ||
-                      sc->sc_fpstate[1] == 0x28 ||
-                      sc->sc_fpstate[1] == 0x60))
-		    goto out;
-	    } else if (CPU_IS_060) {
-		if (!(sc->sc_fpstate[3] == 0x00 ||
-                      sc->sc_fpstate[3] == 0x60 ||
-		      sc->sc_fpstate[3] == 0xe0))
-		    goto out;
-	    } else if (CPU_IS_COLDFIRE) {
-		if (!(sc->sc_fpstate[0] == 0x00 ||
-		      sc->sc_fpstate[0] == 0x05 ||
-		      sc->sc_fpstate[0] == 0xe5))
-		    goto out;
-	    } else
-		goto out;
-
-	    if (CPU_IS_COLDFIRE) {
-		__asm__ volatile ("fmovemd %0,%%fp0-%%fp1\n\t"
-				  "fmovel %1,%%fpcr\n\t"
-				  "fmovel %2,%%fpsr\n\t"
-				  "fmovel %3,%%fpiar"
-				  : /* no outputs */
-				  : "m" (sc->sc_fpregs[0]),
-				    "m" (sc->sc_fpcntl[0]),
-				    "m" (sc->sc_fpcntl[1]),
-				    "m" (sc->sc_fpcntl[2]));
-	    } else {
-		__asm__ volatile (".chip 68k/68881\n\t"
-				  "fmovemx %0,%%fp0-%%fp1\n\t"
-				  "fmoveml %1,%%fpcr/%%fpsr/%%fpiar\n\t"
-				  ".chip 68k"
-				  : /* no outputs */
-				  : "m" (*sc->sc_fpregs),
-				    "m" (*sc->sc_fpcntl));
-	    }
-	}
-
-	if (CPU_IS_COLDFIRE) {
-		__asm__ volatile ("frestore %0" : : "m" (*sc->sc_fpstate));
-	} else {
-		__asm__ volatile (".chip 68k/68881\n\t"
-				  "frestore %0\n\t"
-				  ".chip 68k"
-				  : : "m" (*sc->sc_fpstate));
-	}
-	err = 0;
-
-out:
-	return err;
-}
-
-#define FPCONTEXT_SIZE	216
-#define uc_fpstate	uc_filler[0]
-#define uc_formatvec	uc_filler[FPCONTEXT_SIZE/4]
-#define uc_extra	uc_filler[FPCONTEXT_SIZE/4+1]
-
-static inline int rt_restore_fpu_state(struct ucontext __user *uc)
-{
-	unsigned char fpstate[FPCONTEXT_SIZE];
-	int context_size = CPU_IS_060 ? 8 : (CPU_IS_COLDFIRE ? 12 : 0);
-	fpregset_t fpregs;
-	int err = 1;
-
-	if (FPU_IS_EMU) {
-		/* restore fpu control register */
-		if (__copy_from_user(current->thread.fpcntl,
-				uc->uc_mcontext.fpregs.f_fpcntl, 12))
-			goto out;
-		/* restore all other fpu register */
-		if (__copy_from_user(current->thread.fp,
-				uc->uc_mcontext.fpregs.f_fpregs, 96))
-			goto out;
-		return 0;
-	}
-
-	if (__get_user(*(long *)fpstate, (long __user *)&uc->uc_fpstate))
-		goto out;
-	if (CPU_IS_060 ? fpstate[2] : fpstate[0]) {
-		if (!(CPU_IS_060 || CPU_IS_COLDFIRE))
-			context_size = fpstate[1];
-		/* Verify the frame format.  */
-		if (!(CPU_IS_060 || CPU_IS_COLDFIRE) &&
-		     (fpstate[0] != fpu_version))
-			goto out;
-		if (CPU_IS_020_OR_030) {
-			if (m68k_fputype & FPU_68881 &&
-			    !(context_size == 0x18 || context_size == 0xb4))
-				goto out;
-			if (m68k_fputype & FPU_68882 &&
-			    !(context_size == 0x38 || context_size == 0xd4))
-				goto out;
-		} else if (CPU_IS_040) {
-			if (!(context_size == 0x00 ||
-			      context_size == 0x28 ||
-			      context_size == 0x60))
-				goto out;
-		} else if (CPU_IS_060) {
-			if (!(fpstate[3] == 0x00 ||
-			      fpstate[3] == 0x60 ||
-			      fpstate[3] == 0xe0))
-				goto out;
-		} else if (CPU_IS_COLDFIRE) {
-			if (!(fpstate[3] == 0x00 ||
-			      fpstate[3] == 0x05 ||
-			      fpstate[3] == 0xe5))
-				goto out;
-		} else
-			goto out;
-		if (__copy_from_user(&fpregs, &uc->uc_mcontext.fpregs,
-				     sizeof(fpregs)))
-			goto out;
-
-		if (CPU_IS_COLDFIRE) {
-			__asm__ volatile ("fmovemd %0,%%fp0-%%fp7\n\t"
-					  "fmovel %1,%%fpcr\n\t"
-					  "fmovel %2,%%fpsr\n\t"
-					  "fmovel %3,%%fpiar"
-					  : /* no outputs */
-					  : "m" (fpregs.f_fpregs[0]),
-					    "m" (fpregs.f_fpcntl[0]),
-					    "m" (fpregs.f_fpcntl[1]),
-					    "m" (fpregs.f_fpcntl[2]));
-		} else {
-			__asm__ volatile (".chip 68k/68881\n\t"
-					  "fmovemx %0,%%fp0-%%fp7\n\t"
-					  "fmoveml %1,%%fpcr/%%fpsr/%%fpiar\n\t"
-					  ".chip 68k"
-					  : /* no outputs */
-					  : "m" (*fpregs.f_fpregs),
-					    "m" (*fpregs.f_fpcntl));
-		}
-	}
-	if (context_size &&
-	    __copy_from_user(fpstate + 4, (long __user *)&uc->uc_fpstate + 1,
-			     context_size))
-		goto out;
-
-	if (CPU_IS_COLDFIRE) {
-		__asm__ volatile ("frestore %0" : : "m" (*fpstate));
-	} else {
-		__asm__ volatile (".chip 68k/68881\n\t"
-				  "frestore %0\n\t"
-				  ".chip 68k"
-				  : : "m" (*fpstate));
-	}
-	err = 0;
-
-out:
-	return err;
-}
-
-static int mangle_kernel_stack(struct pt_regs *regs, int formatvec,
-			       void __user *fp)
-{
-	int fsize = frame_extra_sizes[formatvec >> 12];
-	if (fsize < 0) {
-		/*
-		 * user process trying to return with weird frame format
-		 */
-#ifdef DEBUG
-		printk("user process returning with weird frame format\n");
-#endif
-		return 1;
-	}
-	if (!fsize) {
-		regs->format = formatvec >> 12;
-		regs->vector = formatvec & 0xfff;
-	} else {
-		struct switch_stack *sw = (struct switch_stack *)regs - 1;
-		unsigned long buf[fsize / 2]; /* yes, twice as much */
-
-		/* that'll make sure that expansion won't crap over data */
-		if (copy_from_user(buf + fsize / 4, fp, fsize))
-			return 1;
-
-		/* point of no return */
-		regs->format = formatvec >> 12;
-		regs->vector = formatvec & 0xfff;
-#define frame_offset (sizeof(struct pt_regs)+sizeof(struct switch_stack))
-		__asm__ __volatile__ (
-#ifdef CONFIG_COLDFIRE
-			 "   movel %0,%/sp\n\t"
-			 "   bra ret_from_signal\n"
-#else
-			 "   movel %0,%/a0\n\t"
-			 "   subl %1,%/a0\n\t"     /* make room on stack */
-			 "   movel %/a0,%/sp\n\t"  /* set stack pointer */
-			 /* move switch_stack and pt_regs */
-			 "1: movel %0@+,%/a0@+\n\t"
-			 "   dbra %2,1b\n\t"
-			 "   lea %/sp@(%c3),%/a0\n\t" /* add offset of fmt */
-			 "   lsrl  #2,%1\n\t"
-			 "   subql #1,%1\n\t"
-			 /* copy to the gap we'd made */
-			 "2: movel %4@+,%/a0@+\n\t"
-			 "   dbra %1,2b\n\t"
-			 "   bral ret_from_signal\n"
-#endif
-			 : /* no outputs, it doesn't ever return */
-			 : "a" (sw), "d" (fsize), "d" (frame_offset/4-1),
-			   "n" (frame_offset), "a" (buf + fsize/4)
-			 : "a0");
-#undef frame_offset
-	}
-	return 0;
-}
-
-static inline int
-restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *usc, void __user *fp)
-{
-	int formatvec;
-	struct sigcontext context;
-	int err;
-
-	/* Always make any pending restarted system calls return -EINTR */
-	current_thread_info()->restart_block.fn = do_no_restart_syscall;
-
-	/* get previous context */
-	if (copy_from_user(&context, usc, sizeof(context)))
-		goto badframe;
-
-	/* restore passed registers */
-	regs->d0 = context.sc_d0;
-	regs->d1 = context.sc_d1;
-	regs->a0 = context.sc_a0;
-	regs->a1 = context.sc_a1;
-	regs->sr = (regs->sr & 0xff00) | (context.sc_sr & 0xff);
-	regs->pc = context.sc_pc;
-	regs->orig_d0 = -1;		/* disable syscall checks */
-	wrusp(context.sc_usp);
-	formatvec = context.sc_formatvec;
-
-	err = restore_fpu_state(&context);
-
-	if (err || mangle_kernel_stack(regs, formatvec, fp))
-		goto badframe;
-
-	return 0;
-
-badframe:
-	return 1;
-}
-
-static inline int
-rt_restore_ucontext(struct pt_regs *regs, struct switch_stack *sw,
-		    struct ucontext __user *uc)
-{
-	int temp;
-	greg_t __user *gregs = uc->uc_mcontext.gregs;
-	unsigned long usp;
-	int err;
-
-	/* Always make any pending restarted system calls return -EINTR */
-	current_thread_info()->restart_block.fn = do_no_restart_syscall;
-
-	err = __get_user(temp, &uc->uc_mcontext.version);
-	if (temp != MCONTEXT_VERSION)
-		goto badframe;
-	/* restore passed registers */
-	err |= __get_user(regs->d0, &gregs[0]);
-	err |= __get_user(regs->d1, &gregs[1]);
-	err |= __get_user(regs->d2, &gregs[2]);
-	err |= __get_user(regs->d3, &gregs[3]);
-	err |= __get_user(regs->d4, &gregs[4]);
-	err |= __get_user(regs->d5, &gregs[5]);
-	err |= __get_user(sw->d6, &gregs[6]);
-	err |= __get_user(sw->d7, &gregs[7]);
-	err |= __get_user(regs->a0, &gregs[8]);
-	err |= __get_user(regs->a1, &gregs[9]);
-	err |= __get_user(regs->a2, &gregs[10]);
-	err |= __get_user(sw->a3, &gregs[11]);
-	err |= __get_user(sw->a4, &gregs[12]);
-	err |= __get_user(sw->a5, &gregs[13]);
-	err |= __get_user(sw->a6, &gregs[14]);
-	err |= __get_user(usp, &gregs[15]);
-	wrusp(usp);
-	err |= __get_user(regs->pc, &gregs[16]);
-	err |= __get_user(temp, &gregs[17]);
-	regs->sr = (regs->sr & 0xff00) | (temp & 0xff);
-	regs->orig_d0 = -1;		/* disable syscall checks */
-	err |= __get_user(temp, &uc->uc_formatvec);
-
-	err |= rt_restore_fpu_state(uc);
-
-	if (err || do_sigaltstack(&uc->uc_stack, NULL, usp) == -EFAULT)
-		goto badframe;
-
-	if (mangle_kernel_stack(regs, temp, &uc->uc_extra))
-		goto badframe;
-
-	return 0;
-
-badframe:
-	return 1;
-}
-
-asmlinkage int do_sigreturn(unsigned long __unused)
-{
-	struct switch_stack *sw = (struct switch_stack *) &__unused;
-	struct pt_regs *regs = (struct pt_regs *) (sw + 1);
-	unsigned long usp = rdusp();
-	struct sigframe __user *frame = (struct sigframe __user *)(usp - 4);
-	sigset_t set;
-
-	if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
-		goto badframe;
-	if (__get_user(set.sig[0], &frame->sc.sc_mask) ||
-	    (_NSIG_WORDS > 1 &&
-	     __copy_from_user(&set.sig[1], &frame->extramask,
-			      sizeof(frame->extramask))))
-		goto badframe;
-
-	sigdelsetmask(&set, ~_BLOCKABLE);
-	current->blocked = set;
-	recalc_sigpending();
-
-	if (restore_sigcontext(regs, &frame->sc, frame + 1))
-		goto badframe;
-	return regs->d0;
-
-badframe:
-	force_sig(SIGSEGV, current);
-	return 0;
-}
-
-asmlinkage int do_rt_sigreturn(unsigned long __unused)
-{
-	struct switch_stack *sw = (struct switch_stack *) &__unused;
-	struct pt_regs *regs = (struct pt_regs *) (sw + 1);
-	unsigned long usp = rdusp();
-	struct rt_sigframe __user *frame = (struct rt_sigframe __user *)(usp - 4);
-	sigset_t set;
-
-	if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
-		goto badframe;
-	if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set)))
-		goto badframe;
-
-	sigdelsetmask(&set, ~_BLOCKABLE);
-	current->blocked = set;
-	recalc_sigpending();
-
-	if (rt_restore_ucontext(regs, sw, &frame->uc))
-		goto badframe;
-	return regs->d0;
-
-badframe:
-	force_sig(SIGSEGV, current);
-	return 0;
-}
-
-/*
- * Set up a signal frame.
- */
-
-static inline void save_fpu_state(struct sigcontext *sc, struct pt_regs *regs)
-{
-	if (FPU_IS_EMU) {
-		/* save registers */
-		memcpy(sc->sc_fpcntl, current->thread.fpcntl, 12);
-		memcpy(sc->sc_fpregs, current->thread.fp, 24);
-		return;
-	}
-
-	if (CPU_IS_COLDFIRE) {
-		__asm__ volatile ("fsave %0"
-				  : : "m" (*sc->sc_fpstate) : "memory");
-	} else {
-		__asm__ volatile (".chip 68k/68881\n\t"
-				  "fsave %0\n\t"
-				  ".chip 68k"
-				  : : "m" (*sc->sc_fpstate) : "memory");
-	}
-
-	if (CPU_IS_060 ? sc->sc_fpstate[2] : sc->sc_fpstate[0]) {
-		fpu_version = sc->sc_fpstate[0];
-		if (CPU_IS_020_OR_030 &&
-		    regs->vector >= (VEC_FPBRUC * 4) &&
-		    regs->vector <= (VEC_FPNAN * 4)) {
-			/* Clear pending exception in 68882 idle frame */
-			if (*(unsigned short *) sc->sc_fpstate == 0x1f38)
-				sc->sc_fpstate[0x38] |= 1 << 3;
-		}
-
-		if (CPU_IS_COLDFIRE) {
-			__asm__ volatile ("fmovemd %%fp0-%%fp1,%0\n\t"
-					  "fmovel %%fpcr,%1\n\t"
-					  "fmovel %%fpsr,%2\n\t"
-					  "fmovel %%fpiar,%3"
-					  : "=m" (sc->sc_fpregs[0]),
-					    "=m" (sc->sc_fpcntl[0]),
-					    "=m" (sc->sc_fpcntl[1]),
-					    "=m" (sc->sc_fpcntl[2])
-					  : /* no inputs */
-					  : "memory");
-		} else {
-			__asm__ volatile (".chip 68k/68881\n\t"
-					  "fmovemx %%fp0-%%fp1,%0\n\t"
-					  "fmoveml %%fpcr/%%fpsr/%%fpiar,%1\n\t"
-					  ".chip 68k"
-					  : "=m" (*sc->sc_fpregs),
-					    "=m" (*sc->sc_fpcntl)
-					  : /* no inputs */
-					  : "memory");
-		}
-	}
-}
-
-static inline int rt_save_fpu_state(struct ucontext __user *uc, struct pt_regs *regs)
-{
-	unsigned char fpstate[FPCONTEXT_SIZE];
-	int context_size = CPU_IS_060 ? 8 : (CPU_IS_COLDFIRE ? 12 : 0);
-	int err = 0;
-
-	if (FPU_IS_EMU) {
-		/* save fpu control register */
-		err |= copy_to_user(uc->uc_mcontext.fpregs.f_fpcntl,
-				current->thread.fpcntl, 12);
-		/* save all other fpu register */
-		err |= copy_to_user(uc->uc_mcontext.fpregs.f_fpregs,
-				current->thread.fp, 96);
-		return err;
-	}
-
-	if (CPU_IS_COLDFIRE) {
-		__asm__ volatile ("fsave %0" : : "m" (*fpstate) : "memory");
-	} else {
-		__asm__ volatile (".chip 68k/68881\n\t"
-				  "fsave %0\n\t"
-				  ".chip 68k"
-				  : : "m" (*fpstate) : "memory");
-	}
-
-	err |= __put_user(*(long *)fpstate, (long __user *)&uc->uc_fpstate);
-	if (CPU_IS_060 ? fpstate[2] : fpstate[0]) {
-		fpregset_t fpregs;
-		if (!(CPU_IS_060 || CPU_IS_COLDFIRE))
-			context_size = fpstate[1];
-		fpu_version = fpstate[0];
-		if (CPU_IS_020_OR_030 &&
-		    regs->vector >= (VEC_FPBRUC * 4) &&
-		    regs->vector <= (VEC_FPNAN * 4)) {
-			/* Clear pending exception in 68882 idle frame */
-			if (*(unsigned short *) fpstate == 0x1f38)
-				fpstate[0x38] |= 1 << 3;
-		}
-		if (CPU_IS_COLDFIRE) {
-			__asm__ volatile ("fmovemd %%fp0-%%fp7,%0\n\t"
-					  "fmovel %%fpcr,%1\n\t"
-					  "fmovel %%fpsr,%2\n\t"
-					  "fmovel %%fpiar,%3"
-					  : "=m" (fpregs.f_fpregs[0]),
-					    "=m" (fpregs.f_fpcntl[0]),
-					    "=m" (fpregs.f_fpcntl[1]),
-					    "=m" (fpregs.f_fpcntl[2])
-					  : /* no inputs */
-					  : "memory");
-		} else {
-			__asm__ volatile (".chip 68k/68881\n\t"
-					  "fmovemx %%fp0-%%fp7,%0\n\t"
-					  "fmoveml %%fpcr/%%fpsr/%%fpiar,%1\n\t"
-					  ".chip 68k"
-					  : "=m" (*fpregs.f_fpregs),
-					    "=m" (*fpregs.f_fpcntl)
-					  : /* no inputs */
-					  : "memory");
-		}
-		err |= copy_to_user(&uc->uc_mcontext.fpregs, &fpregs,
-				    sizeof(fpregs));
-	}
-	if (context_size)
-		err |= copy_to_user((long __user *)&uc->uc_fpstate + 1, fpstate + 4,
-				    context_size);
-	return err;
-}
-
-static void setup_sigcontext(struct sigcontext *sc, struct pt_regs *regs,
-			     unsigned long mask)
-{
-	sc->sc_mask = mask;
-	sc->sc_usp = rdusp();
-	sc->sc_d0 = regs->d0;
-	sc->sc_d1 = regs->d1;
-	sc->sc_a0 = regs->a0;
-	sc->sc_a1 = regs->a1;
-	sc->sc_sr = regs->sr;
-	sc->sc_pc = regs->pc;
-	sc->sc_formatvec = regs->format << 12 | regs->vector;
-	save_fpu_state(sc, regs);
-}
-
-static inline int rt_setup_ucontext(struct ucontext __user *uc, struct pt_regs *regs)
-{
-	struct switch_stack *sw = (struct switch_stack *)regs - 1;
-	greg_t __user *gregs = uc->uc_mcontext.gregs;
-	int err = 0;
-
-	err |= __put_user(MCONTEXT_VERSION, &uc->uc_mcontext.version);
-	err |= __put_user(regs->d0, &gregs[0]);
-	err |= __put_user(regs->d1, &gregs[1]);
-	err |= __put_user(regs->d2, &gregs[2]);
-	err |= __put_user(regs->d3, &gregs[3]);
-	err |= __put_user(regs->d4, &gregs[4]);
-	err |= __put_user(regs->d5, &gregs[5]);
-	err |= __put_user(sw->d6, &gregs[6]);
-	err |= __put_user(sw->d7, &gregs[7]);
-	err |= __put_user(regs->a0, &gregs[8]);
-	err |= __put_user(regs->a1, &gregs[9]);
-	err |= __put_user(regs->a2, &gregs[10]);
-	err |= __put_user(sw->a3, &gregs[11]);
-	err |= __put_user(sw->a4, &gregs[12]);
-	err |= __put_user(sw->a5, &gregs[13]);
-	err |= __put_user(sw->a6, &gregs[14]);
-	err |= __put_user(rdusp(), &gregs[15]);
-	err |= __put_user(regs->pc, &gregs[16]);
-	err |= __put_user(regs->sr, &gregs[17]);
-	err |= __put_user((regs->format << 12) | regs->vector, &uc->uc_formatvec);
-	err |= rt_save_fpu_state(uc, regs);
-	return err;
-}
-
-static inline void push_cache (unsigned long vaddr)
-{
-	/*
-	 * Using the old cache_push_v() was really a big waste.
-	 *
-	 * What we are trying to do is to flush 8 bytes to ram.
-	 * Flushing 2 cache lines of 16 bytes is much cheaper than
-	 * flushing 1 or 2 pages, as previously done in
-	 * cache_push_v().
-	 *                                                     Jes
-	 */
-	if (CPU_IS_040) {
-		unsigned long temp;
-
-		__asm__ __volatile__ (".chip 68040\n\t"
-				      "nop\n\t"
-				      "ptestr (%1)\n\t"
-				      "movec %%mmusr,%0\n\t"
-				      ".chip 68k"
-				      : "=r" (temp)
-				      : "a" (vaddr));
-
-		temp &= PAGE_MASK;
-		temp |= vaddr & ~PAGE_MASK;
-
-		__asm__ __volatile__ (".chip 68040\n\t"
-				      "nop\n\t"
-				      "cpushl %%bc,(%0)\n\t"
-				      ".chip 68k"
-				      : : "a" (temp));
-	}
-	else if (CPU_IS_060) {
-		unsigned long temp;
-		__asm__ __volatile__ (".chip 68060\n\t"
-				      "plpar (%0)\n\t"
-				      ".chip 68k"
-				      : "=a" (temp)
-				      : "0" (vaddr));
-		__asm__ __volatile__ (".chip 68060\n\t"
-				      "cpushl %%bc,(%0)\n\t"
-				      ".chip 68k"
-				      : : "a" (temp));
-	} else if (!CPU_IS_COLDFIRE) {
-		/*
-		 * 68030/68020 have no writeback cache;
-		 * still need to clear icache.
-		 * Note that vaddr is guaranteed to be long word aligned.
-		 */
-		unsigned long temp;
-		asm volatile ("movec %%cacr,%0" : "=r" (temp));
-		temp += 4;
-		asm volatile ("movec %0,%%caar\n\t"
-			      "movec %1,%%cacr"
-			      : : "r" (vaddr), "r" (temp));
-		asm volatile ("movec %0,%%caar\n\t"
-			      "movec %1,%%cacr"
-			      : : "r" (vaddr + 4), "r" (temp));
-	}
-}
-
-static inline void __user *
-get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, size_t frame_size)
-{
-	unsigned long usp;
-
-	/* Default to using normal stack.  */
-	usp = rdusp();
-
-	/* This is the X/Open sanctioned signal stack switching.  */
-	if (ka->sa.sa_flags & SA_ONSTACK) {
-		if (!sas_ss_flags(usp))
-			usp = current->sas_ss_sp + current->sas_ss_size;
-	}
-	return (void __user *)((usp - frame_size) & -8UL);
-}
-
-static int setup_frame (int sig, struct k_sigaction *ka,
-			 sigset_t *set, struct pt_regs *regs)
-{
-	struct sigframe __user *frame;
-	int fsize = frame_extra_sizes[regs->format];
-	struct sigcontext context;
-	int err = 0;
-
-	if (fsize < 0) {
-#ifdef DEBUG
-		printk ("setup_frame: Unknown frame format %#x\n",
-			regs->format);
-#endif
-		goto give_sigsegv;
-	}
-
-	frame = get_sigframe(ka, regs, sizeof(*frame) + fsize);
-
-	if (fsize)
-		err |= copy_to_user (frame + 1, regs + 1, fsize);
-
-	err |= __put_user((current_thread_info()->exec_domain
-			   && current_thread_info()->exec_domain->signal_invmap
-			   && sig < 32
-			   ? current_thread_info()->exec_domain->signal_invmap[sig]
-			   : sig),
-			  &frame->sig);
-
-	err |= __put_user(regs->vector, &frame->code);
-	err |= __put_user(&frame->sc, &frame->psc);
-
-	if (_NSIG_WORDS > 1)
-		err |= copy_to_user(frame->extramask, &set->sig[1],
-				    sizeof(frame->extramask));
-
-	setup_sigcontext(&context, regs, set->sig[0]);
-	err |= copy_to_user (&frame->sc, &context, sizeof(context));
-
-	/* Set up to return from userspace.  */
-	err |= __put_user(frame->retcode, &frame->pretcode);
-	/* moveq #,d0; trap #0 */
-	err |= __put_user(0x70004e40 + (__NR_sigreturn << 16),
-			  (long __user *)(frame->retcode));
-
-	if (err)
-		goto give_sigsegv;
-
-	push_cache ((unsigned long) &frame->retcode);
-
-	/*
-	 * Set up registers for signal handler.  All the state we are about
-	 * to destroy is successfully copied to sigframe.
-	 */
-	wrusp ((unsigned long) frame);
-	regs->pc = (unsigned long) ka->sa.sa_handler;
-
-	/*
-	 * This is subtle; if we build more than one sigframe, all but the
-	 * first one will see frame format 0 and have fsize == 0, so we won't
-	 * screw stkadj.
-	 */
-	if (fsize)
-		regs->stkadj = fsize;
-
-	/* Prepare to skip over the extra stuff in the exception frame.  */
-	if (regs->stkadj) {
-		struct pt_regs *tregs =
-			(struct pt_regs *)((ulong)regs + regs->stkadj);
-#ifdef DEBUG
-		printk("Performing stackadjust=%04x\n", regs->stkadj);
-#endif
-		/* This must be copied with decreasing addresses to
-                   handle overlaps.  */
-		tregs->vector = 0;
-		tregs->format = 0;
-		tregs->pc = regs->pc;
-		tregs->sr = regs->sr;
-	}
-	return 0;
-
-give_sigsegv:
-	force_sigsegv(sig, current);
-	return err;
-}
-
-static int setup_rt_frame (int sig, struct k_sigaction *ka, siginfo_t *info,
-			    sigset_t *set, struct pt_regs *regs)
-{
-	struct rt_sigframe __user *frame;
-	int fsize = frame_extra_sizes[regs->format];
-	int err = 0;
-
-	if (fsize < 0) {
-#ifdef DEBUG
-		printk ("setup_frame: Unknown frame format %#x\n",
-			regs->format);
-#endif
-		goto give_sigsegv;
-	}
-
-	frame = get_sigframe(ka, regs, sizeof(*frame));
-
-	if (fsize)
-		err |= copy_to_user (&frame->uc.uc_extra, regs + 1, fsize);
-
-	err |= __put_user((current_thread_info()->exec_domain
-			   && current_thread_info()->exec_domain->signal_invmap
-			   && sig < 32
-			   ? current_thread_info()->exec_domain->signal_invmap[sig]
-			   : sig),
-			  &frame->sig);
-	err |= __put_user(&frame->info, &frame->pinfo);
-	err |= __put_user(&frame->uc, &frame->puc);
-	err |= copy_siginfo_to_user(&frame->info, info);
-
-	/* Create the ucontext.  */
-	err |= __put_user(0, &frame->uc.uc_flags);
-	err |= __put_user(NULL, &frame->uc.uc_link);
-	err |= __put_user((void __user *)current->sas_ss_sp,
-			  &frame->uc.uc_stack.ss_sp);
-	err |= __put_user(sas_ss_flags(rdusp()),
-			  &frame->uc.uc_stack.ss_flags);
-	err |= __put_user(current->sas_ss_size, &frame->uc.uc_stack.ss_size);
-	err |= rt_setup_ucontext(&frame->uc, regs);
-	err |= copy_to_user (&frame->uc.uc_sigmask, set, sizeof(*set));
-
-	/* Set up to return from userspace.  */
-	err |= __put_user(frame->retcode, &frame->pretcode);
-#ifdef __mcoldfire__
-	/* movel #__NR_rt_sigreturn,d0; trap #0 */
-	err |= __put_user(0x203c0000, (long __user *)(frame->retcode + 0));
-	err |= __put_user(0x00004e40 + (__NR_rt_sigreturn << 16),
-			  (long __user *)(frame->retcode + 4));
-#else
-	/* moveq #,d0; notb d0; trap #0 */
-	err |= __put_user(0x70004600 + ((__NR_rt_sigreturn ^ 0xff) << 16),
-			  (long __user *)(frame->retcode + 0));
-	err |= __put_user(0x4e40, (short __user *)(frame->retcode + 4));
-#endif
-
-	if (err)
-		goto give_sigsegv;
-
-	push_cache ((unsigned long) &frame->retcode);
-
-	/*
-	 * Set up registers for signal handler.  All the state we are about
-	 * to destroy is successfully copied to sigframe.
-	 */
-	wrusp ((unsigned long) frame);
-	regs->pc = (unsigned long) ka->sa.sa_handler;
-
-	/*
-	 * This is subtle; if we build more than one sigframe, all but the
-	 * first one will see frame format 0 and have fsize == 0, so we won't
-	 * screw stkadj.
-	 */
-	if (fsize)
-		regs->stkadj = fsize;
-
-	/* Prepare to skip over the extra stuff in the exception frame.  */
-	if (regs->stkadj) {
-		struct pt_regs *tregs =
-			(struct pt_regs *)((ulong)regs + regs->stkadj);
-#ifdef DEBUG
-		printk("Performing stackadjust=%04x\n", regs->stkadj);
-#endif
-		/* This must be copied with decreasing addresses to
-                   handle overlaps.  */
-		tregs->vector = 0;
-		tregs->format = 0;
-		tregs->pc = regs->pc;
-		tregs->sr = regs->sr;
-	}
-	return 0;
-
-give_sigsegv:
-	force_sigsegv(sig, current);
-	return err;
-}
-
-static inline void
-handle_restart(struct pt_regs *regs, struct k_sigaction *ka, int has_handler)
-{
-	switch (regs->d0) {
-	case -ERESTARTNOHAND:
-		if (!has_handler)
-			goto do_restart;
-		regs->d0 = -EINTR;
-		break;
-
-	case -ERESTART_RESTARTBLOCK:
-		if (!has_handler) {
-			regs->d0 = __NR_restart_syscall;
-			regs->pc -= 2;
-			break;
-		}
-		regs->d0 = -EINTR;
-		break;
-
-	case -ERESTARTSYS:
-		if (has_handler && !(ka->sa.sa_flags & SA_RESTART)) {
-			regs->d0 = -EINTR;
-			break;
-		}
-	/* fallthrough */
-	case -ERESTARTNOINTR:
-	do_restart:
-		regs->d0 = regs->orig_d0;
-		regs->pc -= 2;
-		break;
-	}
-}
-
-void ptrace_signal_deliver(struct pt_regs *regs, void *cookie)
-{
-	if (regs->orig_d0 < 0)
-		return;
-	switch (regs->d0) {
-	case -ERESTARTNOHAND:
-	case -ERESTARTSYS:
-	case -ERESTARTNOINTR:
-		regs->d0 = regs->orig_d0;
-		regs->orig_d0 = -1;
-		regs->pc -= 2;
-		break;
-	}
-}
-
-/*
- * OK, we're invoking a handler
- */
-static void
-handle_signal(int sig, struct k_sigaction *ka, siginfo_t *info,
-	      sigset_t *oldset, struct pt_regs *regs)
-{
-	int err;
-	/* are we from a system call? */
-	if (regs->orig_d0 >= 0)
-		/* If so, check system call restarting.. */
-		handle_restart(regs, ka, 1);
-
-	/* set up the stack frame */
-	if (ka->sa.sa_flags & SA_SIGINFO)
-		err = setup_rt_frame(sig, ka, info, oldset, regs);
-	else
-		err = setup_frame(sig, ka, oldset, regs);
-
-	if (err)
-		return;
-
-	sigorsets(&current->blocked,&current->blocked,&ka->sa.sa_mask);
-	if (!(ka->sa.sa_flags & SA_NODEFER))
-		sigaddset(&current->blocked,sig);
-	recalc_sigpending();
-
-	if (test_thread_flag(TIF_DELAYED_TRACE)) {
-		regs->sr &= ~0x8000;
-		send_sig(SIGTRAP, current, 1);
-	}
-
-	clear_thread_flag(TIF_RESTORE_SIGMASK);
-}
-
-/*
- * Note that 'init' is a special process: it doesn't get signals it doesn't
- * want to handle. Thus you cannot kill init even with a SIGKILL even by
- * mistake.
- */
-asmlinkage void do_signal(struct pt_regs *regs)
-{
-	siginfo_t info;
-	struct k_sigaction ka;
-	int signr;
-	sigset_t *oldset;
-
-	current->thread.esp0 = (unsigned long) regs;
-
-	if (test_thread_flag(TIF_RESTORE_SIGMASK))
-		oldset = &current->saved_sigmask;
-	else
-		oldset = &current->blocked;
-
-	signr = get_signal_to_deliver(&info, &ka, regs, NULL);
-	if (signr > 0) {
-		/* Whee!  Actually deliver the signal.  */
-		handle_signal(signr, &ka, &info, oldset, regs);
-		return;
-	}
-
-	/* Did we come from a system call? */
-	if (regs->orig_d0 >= 0)
-		/* Restart the system call - no handlers present */
-		handle_restart(regs, NULL, 0);
-
-	/* If there's no signal to deliver, we just restore the saved mask.  */
-	if (test_thread_flag(TIF_RESTORE_SIGMASK)) {
-		clear_thread_flag(TIF_RESTORE_SIGMASK);
-		sigprocmask(SIG_SETMASK, &current->saved_sigmask, NULL);
-	}
-}
diff --git a/ANDROID_3.4.5/arch/m68k/kernel/signal_no.c b/ANDROID_3.4.5/arch/m68k/kernel/signal_no.c
deleted file mode 100644
index 36a81bb6..00000000
--- a/ANDROID_3.4.5/arch/m68k/kernel/signal_no.c
+++ /dev/null
@@ -1,765 +0,0 @@
-/*
- *  linux/arch/m68knommu/kernel/signal.c
- *
- *  Copyright (C) 1991, 1992  Linus Torvalds
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file COPYING in the main directory of this archive
- * for more details.
- */
-
-/*
- * Linux/m68k support by Hamish Macdonald
- *
- * 68060 fixes by Jesper Skov
- *
- * 1997-12-01  Modified for POSIX.1b signals by Andreas Schwab
- *
- * mathemu support by Roman Zippel
- *  (Note: fpstate in the signal context is completely ignored for the emulator
- *         and the internal floating point format is put on stack)
- */
-
-/*
- * ++roman (07/09/96): implemented signal stacks (specially for tosemu on
- * Atari :-) Current limitation: Only one sigstack can be active at one time.
- * If a second signal with SA_ONSTACK set arrives while working on a sigstack,
- * SA_ONSTACK is ignored. This behaviour avoids lots of trouble with nested
- * signal handlers!
- */
-
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <linux/kernel.h>
-#include <linux/signal.h>
-#include <linux/syscalls.h>
-#include <linux/errno.h>
-#include <linux/wait.h>
-#include <linux/ptrace.h>
-#include <linux/unistd.h>
-#include <linux/stddef.h>
-#include <linux/highuid.h>
-#include <linux/tty.h>
-#include <linux/personality.h>
-#include <linux/binfmts.h>
-
-#include <asm/setup.h>
-#include <asm/uaccess.h>
-#include <asm/pgtable.h>
-#include <asm/traps.h>
-#include <asm/ucontext.h>
-
-#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
-
-void ret_from_user_signal(void);
-void ret_from_user_rt_signal(void);
-
-/*
- * Atomically swap in the new signal mask, and wait for a signal.
- */
-asmlinkage int
-sys_sigsuspend(int unused0, int unused1, old_sigset_t mask)
-{
-	mask &= _BLOCKABLE;
-	spin_lock_irq(&current->sighand->siglock);
-	current->saved_sigmask = current->blocked;
-	siginitset(&current->blocked, mask);
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
-
-	current->state = TASK_INTERRUPTIBLE;
-	schedule();
-	set_restore_sigmask();
-
-	return -ERESTARTNOHAND;
-}
-
-asmlinkage int
-sys_sigaction(int sig, const struct old_sigaction __user *act,
-	      struct old_sigaction __user *oact)
-{
-	struct k_sigaction new_ka, old_ka;
-	int ret;
-
-	if (act) {
-		old_sigset_t mask;
-		if (!access_ok(VERIFY_READ, act, sizeof(*act)) ||
-		    __get_user(new_ka.sa.sa_handler, &act->sa_handler) ||
-		    __get_user(new_ka.sa.sa_restorer, &act->sa_restorer) ||
-		    __get_user(new_ka.sa.sa_flags, &act->sa_flags) ||
-		    __get_user(mask, &act->sa_mask))
-			return -EFAULT;
-		siginitset(&new_ka.sa.sa_mask, mask);
-	}
-
-	ret = do_sigaction(sig, act ? &new_ka : NULL, oact ? &old_ka : NULL);
-
-	if (!ret && oact) {
-		if (!access_ok(VERIFY_WRITE, oact, sizeof(*oact)) ||
-		    __put_user(old_ka.sa.sa_handler, &oact->sa_handler) ||
-		    __put_user(old_ka.sa.sa_restorer, &oact->sa_restorer) ||
-		    __put_user(old_ka.sa.sa_flags, &oact->sa_flags) ||
-		    __put_user(old_ka.sa.sa_mask.sig[0], &oact->sa_mask))
-			return -EFAULT;
-	}
-
-	return ret;
-}
-
-asmlinkage int
-sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss)
-{
-	return do_sigaltstack(uss, uoss, rdusp());
-}
-
-
-/*
- * Do a signal return; undo the signal stack.
- *
- * Keep the return code on the stack quadword aligned!
- * That makes the cache flush below easier.
- */
-
-struct sigframe
-{
-	char __user *pretcode;
-	int sig;
-	int code;
-	struct sigcontext __user *psc;
-	char retcode[8];
-	unsigned long extramask[_NSIG_WORDS-1];
-	struct sigcontext sc;
-};
-
-struct rt_sigframe
-{
-	char __user *pretcode;
-	int sig;
-	struct siginfo __user *pinfo;
-	void __user *puc;
-	char retcode[8];
-	struct siginfo info;
-	struct ucontext uc;
-};
-
-#ifdef CONFIG_FPU
-
-static unsigned char fpu_version = 0;	/* version number of fpu, set by setup_frame */
-
-static inline int restore_fpu_state(struct sigcontext *sc)
-{
-	int err = 1;
-
-	if (FPU_IS_EMU) {
-	    /* restore registers */
-	    memcpy(current->thread.fpcntl, sc->sc_fpcntl, 12);
-	    memcpy(current->thread.fp, sc->sc_fpregs, 24);
-	    return 0;
-	}
-
-	if (sc->sc_fpstate[0]) {
-	    /* Verify the frame format.  */
-	    if (sc->sc_fpstate[0] != fpu_version)
-		goto out;
-
-	    __asm__ volatile (".chip 68k/68881\n\t"
-			      "fmovemx %0,%%fp0-%%fp1\n\t"
-			      "fmoveml %1,%%fpcr/%%fpsr/%%fpiar\n\t"
-			      ".chip 68k"
-			      : /* no outputs */
-			      : "m" (*sc->sc_fpregs), "m" (*sc->sc_fpcntl));
-	}
-	__asm__ volatile (".chip 68k/68881\n\t"
-			  "frestore %0\n\t"
-			  ".chip 68k" : : "m" (*sc->sc_fpstate));
-	err = 0;
-
-out:
-	return err;
-}
-
-#define FPCONTEXT_SIZE	216
-#define uc_fpstate	uc_filler[0]
-#define uc_formatvec	uc_filler[FPCONTEXT_SIZE/4]
-#define uc_extra	uc_filler[FPCONTEXT_SIZE/4+1]
-
-static inline int rt_restore_fpu_state(struct ucontext __user *uc)
-{
-	unsigned char fpstate[FPCONTEXT_SIZE];
-	int context_size = 0;
-	fpregset_t fpregs;
-	int err = 1;
-
-	if (FPU_IS_EMU) {
-		/* restore fpu control register */
-		if (__copy_from_user(current->thread.fpcntl,
-				uc->uc_mcontext.fpregs.f_fpcntl, 12))
-			goto out;
-		/* restore all other fpu register */
-		if (__copy_from_user(current->thread.fp,
-				uc->uc_mcontext.fpregs.f_fpregs, 96))
-			goto out;
-		return 0;
-	}
-
-	if (__get_user(*(long *)fpstate, (long __user *)&uc->uc_fpstate))
-		goto out;
-	if (fpstate[0]) {
-		context_size = fpstate[1];
-
-		/* Verify the frame format.  */
-		if (fpstate[0] != fpu_version)
-			goto out;
-		if (__copy_from_user(&fpregs, &uc->uc_mcontext.fpregs,
-		     sizeof(fpregs)))
-			goto out;
-		__asm__ volatile (".chip 68k/68881\n\t"
-				  "fmovemx %0,%%fp0-%%fp7\n\t"
-				  "fmoveml %1,%%fpcr/%%fpsr/%%fpiar\n\t"
-				  ".chip 68k"
-				  : /* no outputs */
-				  : "m" (*fpregs.f_fpregs),
-				    "m" (*fpregs.f_fpcntl));
-	}
-	if (context_size &&
-	    __copy_from_user(fpstate + 4, (long __user *)&uc->uc_fpstate + 1,
-			     context_size))
-		goto out;
-	__asm__ volatile (".chip 68k/68881\n\t"
-			  "frestore %0\n\t"
-			  ".chip 68k" : : "m" (*fpstate));
-	err = 0;
-
-out:
-	return err;
-}
-
-#endif
-
-static inline int
-restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *usc, void __user *fp,
-		   int *pd0)
-{
-	int formatvec;
-	struct sigcontext context;
-	int err = 0;
-
-	/* Always make any pending restarted system calls return -EINTR */
-	current_thread_info()->restart_block.fn = do_no_restart_syscall;
-
-	/* get previous context */
-	if (copy_from_user(&context, usc, sizeof(context)))
-		goto badframe;
-	
-	/* restore passed registers */
-	regs->d1 = context.sc_d1;
-	regs->a0 = context.sc_a0;
-	regs->a1 = context.sc_a1;
-	((struct switch_stack *)regs - 1)->a5 = context.sc_a5;
-	regs->sr = (regs->sr & 0xff00) | (context.sc_sr & 0xff);
-	regs->pc = context.sc_pc;
-	regs->orig_d0 = -1;		/* disable syscall checks */
-	wrusp(context.sc_usp);
-	formatvec = context.sc_formatvec;
-	regs->format = formatvec >> 12;
-	regs->vector = formatvec & 0xfff;
-
-#ifdef CONFIG_FPU
-	err = restore_fpu_state(&context);
-#endif
-
-	*pd0 = context.sc_d0;
-	return err;
-
-badframe:
-	return 1;
-}
-
-static inline int
-rt_restore_ucontext(struct pt_regs *regs, struct switch_stack *sw,
-		    struct ucontext __user *uc, int *pd0)
-{
-	int temp;
-	greg_t __user *gregs = uc->uc_mcontext.gregs;
-	unsigned long usp;
-	int err;
-
-	/* Always make any pending restarted system calls return -EINTR */
-	current_thread_info()->restart_block.fn = do_no_restart_syscall;
-
-	err = __get_user(temp, &uc->uc_mcontext.version);
-	if (temp != MCONTEXT_VERSION)
-		goto badframe;
-	/* restore passed registers */
-	err |= __get_user(regs->d0, &gregs[0]);
-	err |= __get_user(regs->d1, &gregs[1]);
-	err |= __get_user(regs->d2, &gregs[2]);
-	err |= __get_user(regs->d3, &gregs[3]);
-	err |= __get_user(regs->d4, &gregs[4]);
-	err |= __get_user(regs->d5, &gregs[5]);
-	err |= __get_user(sw->d6, &gregs[6]);
-	err |= __get_user(sw->d7, &gregs[7]);
-	err |= __get_user(regs->a0, &gregs[8]);
-	err |= __get_user(regs->a1, &gregs[9]);
-	err |= __get_user(regs->a2, &gregs[10]);
-	err |= __get_user(sw->a3, &gregs[11]);
-	err |= __get_user(sw->a4, &gregs[12]);
-	err |= __get_user(sw->a5, &gregs[13]);
-	err |= __get_user(sw->a6, &gregs[14]);
-	err |= __get_user(usp, &gregs[15]);
-	wrusp(usp);
-	err |= __get_user(regs->pc, &gregs[16]);
-	err |= __get_user(temp, &gregs[17]);
-	regs->sr = (regs->sr & 0xff00) | (temp & 0xff);
-	regs->orig_d0 = -1;		/* disable syscall checks */
-	regs->format = temp >> 12;
-	regs->vector = temp & 0xfff;
-
-	if (do_sigaltstack(&uc->uc_stack, NULL, usp) == -EFAULT)
-		goto badframe;
-
-	*pd0 = regs->d0;
-	return err;
-
-badframe:
-	return 1;
-}
-
-asmlinkage int do_sigreturn(unsigned long __unused)
-{
-	struct switch_stack *sw = (struct switch_stack *) &__unused;
-	struct pt_regs *regs = (struct pt_regs *) (sw + 1);
-	unsigned long usp = rdusp();
-	struct sigframe __user *frame = (struct sigframe __user *)(usp - 4);
-	sigset_t set;
-	int d0;
-
-	if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
-		goto badframe;
-	if (__get_user(set.sig[0], &frame->sc.sc_mask) ||
-	    (_NSIG_WORDS > 1 &&
-	     __copy_from_user(&set.sig[1], &frame->extramask,
-			      sizeof(frame->extramask))))
-		goto badframe;
-
-	sigdelsetmask(&set, ~_BLOCKABLE);
-	spin_lock_irq(&current->sighand->siglock);
-	current->blocked = set;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
-	
-	if (restore_sigcontext(regs, &frame->sc, frame + 1, &d0))
-		goto badframe;
-	return d0;
-
-badframe:
-	force_sig(SIGSEGV, current);
-	return 0;
-}
-
-asmlinkage int do_rt_sigreturn(unsigned long __unused)
-{
-	struct switch_stack *sw = (struct switch_stack *) &__unused;
-	struct pt_regs *regs = (struct pt_regs *) (sw + 1);
-	unsigned long usp = rdusp();
-	struct rt_sigframe __user *frame = (struct rt_sigframe __user *)(usp - 4);
-	sigset_t set;
-	int d0;
-
-	if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
-		goto badframe;
-	if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set)))
-		goto badframe;
-
-	sigdelsetmask(&set, ~_BLOCKABLE);
-	spin_lock_irq(&current->sighand->siglock);
-	current->blocked = set;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
-	
-	if (rt_restore_ucontext(regs, sw, &frame->uc, &d0))
-		goto badframe;
-	return d0;
-
-badframe:
-	force_sig(SIGSEGV, current);
-	return 0;
-}
-
-#ifdef CONFIG_FPU
-/*
- * Set up a signal frame.
- */
-
-static inline void save_fpu_state(struct sigcontext *sc, struct pt_regs *regs)
-{
-	if (FPU_IS_EMU) {
-		/* save registers */
-		memcpy(sc->sc_fpcntl, current->thread.fpcntl, 12);
-		memcpy(sc->sc_fpregs, current->thread.fp, 24);
-		return;
-	}
-
-	__asm__ volatile (".chip 68k/68881\n\t"
-			  "fsave %0\n\t"
-			  ".chip 68k"
-			  : : "m" (*sc->sc_fpstate) : "memory");
-
-	if (sc->sc_fpstate[0]) {
-		fpu_version = sc->sc_fpstate[0];
-		__asm__ volatile (".chip 68k/68881\n\t"
-				  "fmovemx %%fp0-%%fp1,%0\n\t"
-				  "fmoveml %%fpcr/%%fpsr/%%fpiar,%1\n\t"
-				  ".chip 68k"
-				  : "=m" (*sc->sc_fpregs),
-				    "=m" (*sc->sc_fpcntl)
-				  : /* no inputs */
-				  : "memory");
-	}
-}
-
-static inline int rt_save_fpu_state(struct ucontext __user *uc, struct pt_regs *regs)
-{
-	unsigned char fpstate[FPCONTEXT_SIZE];
-	int context_size = 0;
-	int err = 0;
-
-	if (FPU_IS_EMU) {
-		/* save fpu control register */
-		err |= copy_to_user(uc->uc_mcontext.fpregs.f_pcntl,
-				current->thread.fpcntl, 12);
-		/* save all other fpu register */
-		err |= copy_to_user(uc->uc_mcontext.fpregs.f_fpregs,
-				current->thread.fp, 96);
-		return err;
-	}
-
-	__asm__ volatile (".chip 68k/68881\n\t"
-			  "fsave %0\n\t"
-			  ".chip 68k"
-			  : : "m" (*fpstate) : "memory");
-
-	err |= __put_user(*(long *)fpstate, (long __user *)&uc->uc_fpstate);
-	if (fpstate[0]) {
-		fpregset_t fpregs;
-		context_size = fpstate[1];
-		fpu_version = fpstate[0];
-		__asm__ volatile (".chip 68k/68881\n\t"
-				  "fmovemx %%fp0-%%fp7,%0\n\t"
-				  "fmoveml %%fpcr/%%fpsr/%%fpiar,%1\n\t"
-				  ".chip 68k"
-				  : "=m" (*fpregs.f_fpregs),
-				    "=m" (*fpregs.f_fpcntl)
-				  : /* no inputs */
-				  : "memory");
-		err |= copy_to_user(&uc->uc_mcontext.fpregs, &fpregs,
-				    sizeof(fpregs));
-	}
-	if (context_size)
-		err |= copy_to_user((long __user *)&uc->uc_fpstate + 1, fpstate + 4,
-				    context_size);
-	return err;
-}
-
-#endif
-
-static void setup_sigcontext(struct sigcontext *sc, struct pt_regs *regs,
-			     unsigned long mask)
-{
-	sc->sc_mask = mask;
-	sc->sc_usp = rdusp();
-	sc->sc_d0 = regs->d0;
-	sc->sc_d1 = regs->d1;
-	sc->sc_a0 = regs->a0;
-	sc->sc_a1 = regs->a1;
-	sc->sc_a5 = ((struct switch_stack *)regs - 1)->a5;
-	sc->sc_sr = regs->sr;
-	sc->sc_pc = regs->pc;
-	sc->sc_formatvec = regs->format << 12 | regs->vector;
-#ifdef CONFIG_FPU
-	save_fpu_state(sc, regs);
-#endif
-}
-
-static inline int rt_setup_ucontext(struct ucontext __user *uc, struct pt_regs *regs)
-{
-	struct switch_stack *sw = (struct switch_stack *)regs - 1;
-	greg_t __user *gregs = uc->uc_mcontext.gregs;
-	int err = 0;
-
-	err |= __put_user(MCONTEXT_VERSION, &uc->uc_mcontext.version);
-	err |= __put_user(regs->d0, &gregs[0]);
-	err |= __put_user(regs->d1, &gregs[1]);
-	err |= __put_user(regs->d2, &gregs[2]);
-	err |= __put_user(regs->d3, &gregs[3]);
-	err |= __put_user(regs->d4, &gregs[4]);
-	err |= __put_user(regs->d5, &gregs[5]);
-	err |= __put_user(sw->d6, &gregs[6]);
-	err |= __put_user(sw->d7, &gregs[7]);
-	err |= __put_user(regs->a0, &gregs[8]);
-	err |= __put_user(regs->a1, &gregs[9]);
-	err |= __put_user(regs->a2, &gregs[10]);
-	err |= __put_user(sw->a3, &gregs[11]);
-	err |= __put_user(sw->a4, &gregs[12]);
-	err |= __put_user(sw->a5, &gregs[13]);
-	err |= __put_user(sw->a6, &gregs[14]);
-	err |= __put_user(rdusp(), &gregs[15]);
-	err |= __put_user(regs->pc, &gregs[16]);
-	err |= __put_user(regs->sr, &gregs[17]);
-#ifdef CONFIG_FPU
-	err |= rt_save_fpu_state(uc, regs);
-#endif
-	return err;
-}
-
-static inline void __user *
-get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, size_t frame_size)
-{
-	unsigned long usp;
-
-	/* Default to using normal stack.  */
-	usp = rdusp();
-
-	/* This is the X/Open sanctioned signal stack switching.  */
-	if (ka->sa.sa_flags & SA_ONSTACK) {
-		if (!sas_ss_flags(usp))
-			usp = current->sas_ss_sp + current->sas_ss_size;
-	}
-	return (void __user *)((usp - frame_size) & -8UL);
-}
-
-static int setup_frame (int sig, struct k_sigaction *ka,
-			 sigset_t *set, struct pt_regs *regs)
-{
-	struct sigframe __user *frame;
-	struct sigcontext context;
-	int err = 0;
-
-	frame = get_sigframe(ka, regs, sizeof(*frame));
-
-	err |= __put_user((current_thread_info()->exec_domain
-			   && current_thread_info()->exec_domain->signal_invmap
-			   && sig < 32
-			   ? current_thread_info()->exec_domain->signal_invmap[sig]
-			   : sig),
-			  &frame->sig);
-
-	err |= __put_user(regs->vector, &frame->code);
-	err |= __put_user(&frame->sc, &frame->psc);
-
-	if (_NSIG_WORDS > 1)
-		err |= copy_to_user(frame->extramask, &set->sig[1],
-				    sizeof(frame->extramask));
-
-	setup_sigcontext(&context, regs, set->sig[0]);
-	err |= copy_to_user (&frame->sc, &context, sizeof(context));
-
-	/* Set up to return from userspace.  */
-	err |= __put_user((void *) ret_from_user_signal, &frame->pretcode);
-
-	if (err)
-		goto give_sigsegv;
-
-	/* Set up registers for signal handler */
-	wrusp ((unsigned long) frame);
-	regs->pc = (unsigned long) ka->sa.sa_handler;
-	((struct switch_stack *)regs - 1)->a5 = current->mm->start_data;
-	regs->format = 0x4; /*set format byte to make stack appear modulo 4 
-						which it will be when doing the rte */
-
-adjust_stack:
-	/* Prepare to skip over the extra stuff in the exception frame.  */
-	if (regs->stkadj) {
-		struct pt_regs *tregs =
-			(struct pt_regs *)((ulong)regs + regs->stkadj);
-#if defined(DEBUG)
-		printk(KERN_DEBUG "Performing stackadjust=%04x\n", regs->stkadj);
-#endif
-		/* This must be copied with decreasing addresses to
-                   handle overlaps.  */
-		tregs->vector = 0;
-		tregs->format = 0;
-		tregs->pc = regs->pc;
-		tregs->sr = regs->sr;
-	}
-	return err;
-
-give_sigsegv:
-	force_sigsegv(sig, current);
-	goto adjust_stack;
-}
-
-static int setup_rt_frame (int sig, struct k_sigaction *ka, siginfo_t *info,
-			    sigset_t *set, struct pt_regs *regs)
-{
-	struct rt_sigframe __user *frame;
-	int err = 0;
-
-	frame = get_sigframe(ka, regs, sizeof(*frame));
-
-	err |= __put_user((current_thread_info()->exec_domain
-			   && current_thread_info()->exec_domain->signal_invmap
-			   && sig < 32
-			   ? current_thread_info()->exec_domain->signal_invmap[sig]
-			   : sig),
-			  &frame->sig);
-	err |= __put_user(&frame->info, &frame->pinfo);
-	err |= __put_user(&frame->uc, &frame->puc);
-	err |= copy_siginfo_to_user(&frame->info, info);
-
-	/* Create the ucontext.  */
-	err |= __put_user(0, &frame->uc.uc_flags);
-	err |= __put_user(NULL, &frame->uc.uc_link);
-	err |= __put_user((void __user *)current->sas_ss_sp,
-			  &frame->uc.uc_stack.ss_sp);
-	err |= __put_user(sas_ss_flags(rdusp()),
-			  &frame->uc.uc_stack.ss_flags);
-	err |= __put_user(current->sas_ss_size, &frame->uc.uc_stack.ss_size);
-	err |= rt_setup_ucontext(&frame->uc, regs);
-	err |= copy_to_user (&frame->uc.uc_sigmask, set, sizeof(*set));
-
-	/* Set up to return from userspace.  */
-	err |= __put_user((void *) ret_from_user_rt_signal, &frame->pretcode);
-
-	if (err)
-		goto give_sigsegv;
-
-	/* Set up registers for signal handler */
-	wrusp ((unsigned long) frame);
-	regs->pc = (unsigned long) ka->sa.sa_handler;
-	((struct switch_stack *)regs - 1)->a5 = current->mm->start_data;
-	regs->format = 0x4; /*set format byte to make stack appear modulo 4 
-						which it will be when doing the rte */
-
-adjust_stack:
-	/* Prepare to skip over the extra stuff in the exception frame.  */
-	if (regs->stkadj) {
-		struct pt_regs *tregs =
-			(struct pt_regs *)((ulong)regs + regs->stkadj);
-#if defined(DEBUG)
-		printk(KERN_DEBUG "Performing stackadjust=%04x\n", regs->stkadj);
-#endif
-		/* This must be copied with decreasing addresses to
-                   handle overlaps.  */
-		tregs->vector = 0;
-		tregs->format = 0;
-		tregs->pc = regs->pc;
-		tregs->sr = regs->sr;
-	}
-	return err;
-
-give_sigsegv:
-	force_sigsegv(sig, current);
-	goto adjust_stack;
-}
-
-static inline void
-handle_restart(struct pt_regs *regs, struct k_sigaction *ka, int has_handler)
-{
-	switch (regs->d0) {
-	case -ERESTARTNOHAND:
-		if (!has_handler)
-			goto do_restart;
-		regs->d0 = -EINTR;
-		break;
-
-	case -ERESTART_RESTARTBLOCK:
-		if (!has_handler) {
-			regs->d0 = __NR_restart_syscall;
-			regs->pc -= 2;
-			break;
-		}
-		regs->d0 = -EINTR;
-		break;
-
-	case -ERESTARTSYS:
-		if (has_handler && !(ka->sa.sa_flags & SA_RESTART)) {
-			regs->d0 = -EINTR;
-			break;
-		}
-	/* fallthrough */
-	case -ERESTARTNOINTR:
-	do_restart:
-		regs->d0 = regs->orig_d0;
-		regs->pc -= 2;
-		break;
-	}
-}
-
-/*
- * OK, we're invoking a handler
- */
-static void
-handle_signal(int sig, struct k_sigaction *ka, siginfo_t *info,
-	      sigset_t *oldset, struct pt_regs *regs)
-{
-	int err;
-	/* are we from a system call? */
-	if (regs->orig_d0 >= 0)
-		/* If so, check system call restarting.. */
-		handle_restart(regs, ka, 1);
-
-	/* set up the stack frame */
-	if (ka->sa.sa_flags & SA_SIGINFO)
-		err = setup_rt_frame(sig, ka, info, oldset, regs);
-	else
-		err = setup_frame(sig, ka, oldset, regs);
-
-	if (err)
-		return;
-
-	spin_lock_irq(&current->sighand->siglock);
-	sigorsets(&current->blocked,&current->blocked,&ka->sa.sa_mask);
-	if (!(ka->sa.sa_flags & SA_NODEFER))
-		sigaddset(&current->blocked,sig);
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
-
-	clear_thread_flag(TIF_RESTORE_SIGMASK);
-}
-
-/*
- * Note that 'init' is a special process: it doesn't get signals it doesn't
- * want to handle. Thus you cannot kill init even with a SIGKILL even by
- * mistake.
- */
-asmlinkage void do_signal(struct pt_regs *regs)
-{
-	struct k_sigaction ka;
-	siginfo_t info;
-	int signr;
-	sigset_t *oldset;
-
-	/*
-	 * We want the common case to go fast, which
-	 * is why we may in certain cases get here from
-	 * kernel mode. Just return without doing anything
-	 * if so.
-	 */
-	if (!user_mode(regs))
-		return;
-
-	if (test_thread_flag(TIF_RESTORE_SIGMASK))
-		oldset = &current->saved_sigmask;
-	else
-		oldset = &current->blocked;
-
-	signr = get_signal_to_deliver(&info, &ka, regs, NULL);
-	if (signr > 0) {
-		/* Whee!  Actually deliver the signal.  */
-		handle_signal(signr, &ka, &info, oldset, regs);
-		return;
-	}
-
-	/* Did we come from a system call? */
-	if (regs->orig_d0 >= 0) {
-		/* Restart the system call - no handlers present */
-		handle_restart(regs, NULL, 0);
-	}
-
-	/* If there's no signal to deliver, we just restore the saved mask.  */
-	if (test_thread_flag(TIF_RESTORE_SIGMASK)) {
-		clear_thread_flag(TIF_RESTORE_SIGMASK);
-		sigprocmask(SIG_SETMASK, &current->saved_sigmask, NULL);
-	}
-}
diff --git a/ANDROID_3.4.5/arch/m68k/kernel/sun3-head.S b/ANDROID_3.4.5/arch/m68k/kernel/sun3-head.S
deleted file mode 100644
index 43036bf4..00000000
--- a/ANDROID_3.4.5/arch/m68k/kernel/sun3-head.S
+++ /dev/null
@@ -1,95 +0,0 @@
-#include <linux/linkage.h>
-#include <linux/init.h>
-
-#include <asm/entry.h>
-#include <asm/page.h>
-#include <asm/contregs.h>
-#include <asm/sun3-head.h>
-
-PSL_HIGHIPL     = 0x2700
-NBSG            = 0x20000
-ICACHE_ONLY	= 0x00000009
-CACHES_OFF	= 0x00000008	| actually a clear and disable --m
-#define MAS_STACK INT_STACK
-ROOT_TABLE_SIZE = 128
-PAGESIZE	= 8192
-SUN3_INVALID_PMEG = 255
-.globl bootup_user_stack
-.globl bootup_kernel_stack
-.globl pg0
-.globl swapper_pg_dir
-.globl kernel_pmd_table
-.globl availmem
-.global m68k_pgtable_cachemode
-.global kpt
-| todo: all these should be in bss!
-swapper_pg_dir:                .skip 0x2000
-pg0:                           .skip 0x2000
-kernel_pmd_table:              .skip 0x2000
-
-.globl kernel_pg_dir
-.equ    kernel_pg_dir,kernel_pmd_table
-
-	__HEAD
-ENTRY(_stext)
-ENTRY(_start)
-
-/* Firstly, disable interrupts and set up function codes. */
-	movew	#PSL_HIGHIPL, %sr
-	moveq	#FC_CONTROL, %d0
-	movec	%d0, %sfc
-	movec	%d0, %dfc
-
-/* Make sure we're in context zero. */
-	moveq	#0, %d0
-	movsb	%d0, AC_CONTEXT
-
-/* map everything the bootloader left us into high memory, clean up the
-   excess later */
-	lea	(AC_SEGMAP+0),%a0
-	lea	(AC_SEGMAP+KERNBASE),%a1
-1:
-	movsb	%a0@, %d1
-	movsb	%d1, %a1@
-	cmpib	#SUN3_INVALID_PMEG, %d1
-	beq	2f
-	addl	#NBSG,%a0
-	addl	#NBSG,%a1
-	jmp	1b
-
-2:
-
-/* Disable caches and jump to high code. */
-	moveq	#ICACHE_ONLY,%d0	| Cache disabled until we're ready to enable it
-	movc	%d0, %cacr	|   is this the right value? (yes --m)
-	jmp	1f:l
-
-/* Following code executes at high addresses (0xE000xxx). */
-1:	lea	init_task,%curptr			| get initial thread...
-	lea	init_thread_union+THREAD_SIZE,%sp	| ...and its stack.
-
-/* Point MSP at an invalid page to trap if it's used. --m */
-	movl	#(PAGESIZE),%d0
-	movc	%d0,%msp
-	moveq	#-1,%d0
-	movsb	%d0,(AC_SEGMAP+0x0)
-
-	jbsr	sun3_init
-
-	jbsr	base_trap_init
-
-        jbsr    start_kernel
-	trap	#15
-
-        .data
-        .even
-kpt:
-        .long 0
-availmem:
-        .long 0
-| todo: remove next two. --m
-is_medusa:
-        .long 0
-m68k_pgtable_cachemode:
-        .long 0
-
diff --git a/ANDROID_3.4.5/arch/m68k/kernel/sys_m68k.c b/ANDROID_3.4.5/arch/m68k/kernel/sys_m68k.c
deleted file mode 100644
index 8623f8dc..00000000
--- a/ANDROID_3.4.5/arch/m68k/kernel/sys_m68k.c
+++ /dev/null
@@ -1,580 +0,0 @@
-/*
- * linux/arch/m68k/kernel/sys_m68k.c
- *
- * This file contains various random system calls that
- * have a non-standard calling sequence on the Linux/m68k
- * platform.
- */
-
-#include <linux/capability.h>
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <linux/fs.h>
-#include <linux/smp.h>
-#include <linux/sem.h>
-#include <linux/msg.h>
-#include <linux/shm.h>
-#include <linux/stat.h>
-#include <linux/syscalls.h>
-#include <linux/mman.h>
-#include <linux/file.h>
-#include <linux/ipc.h>
-
-#include <asm/setup.h>
-#include <asm/uaccess.h>
-#include <asm/cachectl.h>
-#include <asm/traps.h>
-#include <asm/page.h>
-#include <asm/unistd.h>
-#include <asm/cacheflush.h>
-
-#ifdef CONFIG_MMU
-
-#include <asm/tlb.h>
-
-asmlinkage int do_page_fault(struct pt_regs *regs, unsigned long address,
-			     unsigned long error_code);
-
-asmlinkage long sys_mmap2(unsigned long addr, unsigned long len,
-	unsigned long prot, unsigned long flags,
-	unsigned long fd, unsigned long pgoff)
-{
-	/*
-	 * This is wrong for sun3 - there PAGE_SIZE is 8Kb,
-	 * so we need to shift the argument down by 1; m68k mmap64(3)
-	 * (in libc) expects the last argument of mmap2 in 4Kb units.
-	 */
-	return sys_mmap_pgoff(addr, len, prot, flags, fd, pgoff);
-}
-
-/* Convert virtual (user) address VADDR to physical address PADDR */
-#define virt_to_phys_040(vaddr)						\
-({									\
-  unsigned long _mmusr, _paddr;						\
-									\
-  __asm__ __volatile__ (".chip 68040\n\t"				\
-			"ptestr (%1)\n\t"				\
-			"movec %%mmusr,%0\n\t"				\
-			".chip 68k"					\
-			: "=r" (_mmusr)					\
-			: "a" (vaddr));					\
-  _paddr = (_mmusr & MMU_R_040) ? (_mmusr & PAGE_MASK) : 0;		\
-  _paddr;								\
-})
-
-static inline int
-cache_flush_040 (unsigned long addr, int scope, int cache, unsigned long len)
-{
-  unsigned long paddr, i;
-
-  switch (scope)
-    {
-    case FLUSH_SCOPE_ALL:
-      switch (cache)
-	{
-	case FLUSH_CACHE_DATA:
-	  /* This nop is needed for some broken versions of the 68040.  */
-	  __asm__ __volatile__ ("nop\n\t"
-				".chip 68040\n\t"
-				"cpusha %dc\n\t"
-				".chip 68k");
-	  break;
-	case FLUSH_CACHE_INSN:
-	  __asm__ __volatile__ ("nop\n\t"
-				".chip 68040\n\t"
-				"cpusha %ic\n\t"
-				".chip 68k");
-	  break;
-	default:
-	case FLUSH_CACHE_BOTH:
-	  __asm__ __volatile__ ("nop\n\t"
-				".chip 68040\n\t"
-				"cpusha %bc\n\t"
-				".chip 68k");
-	  break;
-	}
-      break;
-
-    case FLUSH_SCOPE_LINE:
-      /* Find the physical address of the first mapped page in the
-	 address range.  */
-      if ((paddr = virt_to_phys_040(addr))) {
-        paddr += addr & ~(PAGE_MASK | 15);
-        len = (len + (addr & 15) + 15) >> 4;
-      } else {
-	unsigned long tmp = PAGE_SIZE - (addr & ~PAGE_MASK);
-
-	if (len <= tmp)
-	  return 0;
-	addr += tmp;
-	len -= tmp;
-	tmp = PAGE_SIZE;
-	for (;;)
-	  {
-	    if ((paddr = virt_to_phys_040(addr)))
-	      break;
-	    if (len <= tmp)
-	      return 0;
-	    addr += tmp;
-	    len -= tmp;
-	  }
-	len = (len + 15) >> 4;
-      }
-      i = (PAGE_SIZE - (paddr & ~PAGE_MASK)) >> 4;
-      while (len--)
-	{
-	  switch (cache)
-	    {
-	    case FLUSH_CACHE_DATA:
-	      __asm__ __volatile__ ("nop\n\t"
-				    ".chip 68040\n\t"
-				    "cpushl %%dc,(%0)\n\t"
-				    ".chip 68k"
-				    : : "a" (paddr));
-	      break;
-	    case FLUSH_CACHE_INSN:
-	      __asm__ __volatile__ ("nop\n\t"
-				    ".chip 68040\n\t"
-				    "cpushl %%ic,(%0)\n\t"
-				    ".chip 68k"
-				    : : "a" (paddr));
-	      break;
-	    default:
-	    case FLUSH_CACHE_BOTH:
-	      __asm__ __volatile__ ("nop\n\t"
-				    ".chip 68040\n\t"
-				    "cpushl %%bc,(%0)\n\t"
-				    ".chip 68k"
-				    : : "a" (paddr));
-	      break;
-	    }
-	  if (!--i && len)
-	    {
-	      /*
-	       * No need to page align here since it is done by
-	       * virt_to_phys_040().
-	       */
-	      addr += PAGE_SIZE;
-	      i = PAGE_SIZE / 16;
-	      /* Recompute physical address when crossing a page
-	         boundary. */
-	      for (;;)
-		{
-		  if ((paddr = virt_to_phys_040(addr)))
-		    break;
-		  if (len <= i)
-		    return 0;
-		  len -= i;
-		  addr += PAGE_SIZE;
-		}
-	    }
-	  else
-	    paddr += 16;
-	}
-      break;
-
-    default:
-    case FLUSH_SCOPE_PAGE:
-      len += (addr & ~PAGE_MASK) + (PAGE_SIZE - 1);
-      for (len >>= PAGE_SHIFT; len--; addr += PAGE_SIZE)
-	{
-	  if (!(paddr = virt_to_phys_040(addr)))
-	    continue;
-	  switch (cache)
-	    {
-	    case FLUSH_CACHE_DATA:
-	      __asm__ __volatile__ ("nop\n\t"
-				    ".chip 68040\n\t"
-				    "cpushp %%dc,(%0)\n\t"
-				    ".chip 68k"
-				    : : "a" (paddr));
-	      break;
-	    case FLUSH_CACHE_INSN:
-	      __asm__ __volatile__ ("nop\n\t"
-				    ".chip 68040\n\t"
-				    "cpushp %%ic,(%0)\n\t"
-				    ".chip 68k"
-				    : : "a" (paddr));
-	      break;
-	    default:
-	    case FLUSH_CACHE_BOTH:
-	      __asm__ __volatile__ ("nop\n\t"
-				    ".chip 68040\n\t"
-				    "cpushp %%bc,(%0)\n\t"
-				    ".chip 68k"
-				    : : "a" (paddr));
-	      break;
-	    }
-	}
-      break;
-    }
-  return 0;
-}
-
-#define virt_to_phys_060(vaddr)				\
-({							\
-  unsigned long paddr;					\
-  __asm__ __volatile__ (".chip 68060\n\t"		\
-			"plpar (%0)\n\t"		\
-			".chip 68k"			\
-			: "=a" (paddr)			\
-			: "0" (vaddr));			\
-  (paddr); /* XXX */					\
-})
-
-static inline int
-cache_flush_060 (unsigned long addr, int scope, int cache, unsigned long len)
-{
-  unsigned long paddr, i;
-
-  /*
-   * 68060 manual says:
-   *  cpush %dc : flush DC, remains valid (with our %cacr setup)
-   *  cpush %ic : invalidate IC
-   *  cpush %bc : flush DC + invalidate IC
-   */
-  switch (scope)
-    {
-    case FLUSH_SCOPE_ALL:
-      switch (cache)
-	{
-	case FLUSH_CACHE_DATA:
-	  __asm__ __volatile__ (".chip 68060\n\t"
-				"cpusha %dc\n\t"
-				".chip 68k");
-	  break;
-	case FLUSH_CACHE_INSN:
-	  __asm__ __volatile__ (".chip 68060\n\t"
-				"cpusha %ic\n\t"
-				".chip 68k");
-	  break;
-	default:
-	case FLUSH_CACHE_BOTH:
-	  __asm__ __volatile__ (".chip 68060\n\t"
-				"cpusha %bc\n\t"
-				".chip 68k");
-	  break;
-	}
-      break;
-
-    case FLUSH_SCOPE_LINE:
-      /* Find the physical address of the first mapped page in the
-	 address range.  */
-      len += addr & 15;
-      addr &= -16;
-      if (!(paddr = virt_to_phys_060(addr))) {
-	unsigned long tmp = PAGE_SIZE - (addr & ~PAGE_MASK);
-
-	if (len <= tmp)
-	  return 0;
-	addr += tmp;
-	len -= tmp;
-	tmp = PAGE_SIZE;
-	for (;;)
-	  {
-	    if ((paddr = virt_to_phys_060(addr)))
-	      break;
-	    if (len <= tmp)
-	      return 0;
-	    addr += tmp;
-	    len -= tmp;
-	  }
-      }
-      len = (len + 15) >> 4;
-      i = (PAGE_SIZE - (paddr & ~PAGE_MASK)) >> 4;
-      while (len--)
-	{
-	  switch (cache)
-	    {
-	    case FLUSH_CACHE_DATA:
-	      __asm__ __volatile__ (".chip 68060\n\t"
-				    "cpushl %%dc,(%0)\n\t"
-				    ".chip 68k"
-				    : : "a" (paddr));
-	      break;
-	    case FLUSH_CACHE_INSN:
-	      __asm__ __volatile__ (".chip 68060\n\t"
-				    "cpushl %%ic,(%0)\n\t"
-				    ".chip 68k"
-				    : : "a" (paddr));
-	      break;
-	    default:
-	    case FLUSH_CACHE_BOTH:
-	      __asm__ __volatile__ (".chip 68060\n\t"
-				    "cpushl %%bc,(%0)\n\t"
-				    ".chip 68k"
-				    : : "a" (paddr));
-	      break;
-	    }
-	  if (!--i && len)
-	    {
-
-	      /*
-	       * We just want to jump to the first cache line
-	       * in the next page.
-	       */
-	      addr += PAGE_SIZE;
-	      addr &= PAGE_MASK;
-
-	      i = PAGE_SIZE / 16;
-	      /* Recompute physical address when crossing a page
-	         boundary. */
-	      for (;;)
-	        {
-	          if ((paddr = virt_to_phys_060(addr)))
-	            break;
-	          if (len <= i)
-	            return 0;
-	          len -= i;
-	          addr += PAGE_SIZE;
-	        }
-	    }
-	  else
-	    paddr += 16;
-	}
-      break;
-
-    default:
-    case FLUSH_SCOPE_PAGE:
-      len += (addr & ~PAGE_MASK) + (PAGE_SIZE - 1);
-      addr &= PAGE_MASK;	/* Workaround for bug in some
-				   revisions of the 68060 */
-      for (len >>= PAGE_SHIFT; len--; addr += PAGE_SIZE)
-	{
-	  if (!(paddr = virt_to_phys_060(addr)))
-	    continue;
-	  switch (cache)
-	    {
-	    case FLUSH_CACHE_DATA:
-	      __asm__ __volatile__ (".chip 68060\n\t"
-				    "cpushp %%dc,(%0)\n\t"
-				    ".chip 68k"
-				    : : "a" (paddr));
-	      break;
-	    case FLUSH_CACHE_INSN:
-	      __asm__ __volatile__ (".chip 68060\n\t"
-				    "cpushp %%ic,(%0)\n\t"
-				    ".chip 68k"
-				    : : "a" (paddr));
-	      break;
-	    default:
-	    case FLUSH_CACHE_BOTH:
-	      __asm__ __volatile__ (".chip 68060\n\t"
-				    "cpushp %%bc,(%0)\n\t"
-				    ".chip 68k"
-				    : : "a" (paddr));
-	      break;
-	    }
-	}
-      break;
-    }
-  return 0;
-}
-
-/* sys_cacheflush -- flush (part of) the processor cache.  */
-asmlinkage int
-sys_cacheflush (unsigned long addr, int scope, int cache, unsigned long len)
-{
-	struct vm_area_struct *vma;
-	int ret = -EINVAL;
-
-	if (scope < FLUSH_SCOPE_LINE || scope > FLUSH_SCOPE_ALL ||
-	    cache & ~FLUSH_CACHE_BOTH)
-		goto out;
-
-	if (scope == FLUSH_SCOPE_ALL) {
-		/* Only the superuser may explicitly flush the whole cache. */
-		ret = -EPERM;
-		if (!capable(CAP_SYS_ADMIN))
-			goto out;
-	} else {
-		/*
-		 * Verify that the specified address region actually belongs
-		 * to this process.
-		 */
-		vma = find_vma (current->mm, addr);
-		ret = -EINVAL;
-		/* Check for overflow.  */
-		if (addr + len < addr)
-			goto out;
-		if (vma == NULL || addr < vma->vm_start || addr + len > vma->vm_end)
-			goto out;
-	}
-
-	if (CPU_IS_020_OR_030) {
-		if (scope == FLUSH_SCOPE_LINE && len < 256) {
-			unsigned long cacr;
-			__asm__ ("movec %%cacr, %0" : "=r" (cacr));
-			if (cache & FLUSH_CACHE_INSN)
-				cacr |= 4;
-			if (cache & FLUSH_CACHE_DATA)
-				cacr |= 0x400;
-			len >>= 2;
-			while (len--) {
-				__asm__ __volatile__ ("movec %1, %%caar\n\t"
-						      "movec %0, %%cacr"
-						      : /* no outputs */
-						      : "r" (cacr), "r" (addr));
-				addr += 4;
-			}
-		} else {
-			/* Flush the whole cache, even if page granularity requested. */
-			unsigned long cacr;
-			__asm__ ("movec %%cacr, %0" : "=r" (cacr));
-			if (cache & FLUSH_CACHE_INSN)
-				cacr |= 8;
-			if (cache & FLUSH_CACHE_DATA)
-				cacr |= 0x800;
-			__asm__ __volatile__ ("movec %0, %%cacr" : : "r" (cacr));
-		}
-		ret = 0;
-		goto out;
-	} else {
-	    /*
-	     * 040 or 060: don't blindly trust 'scope', someone could
-	     * try to flush a few megs of memory.
-	     */
-
-	    if (len>=3*PAGE_SIZE && scope<FLUSH_SCOPE_PAGE)
-	        scope=FLUSH_SCOPE_PAGE;
-	    if (len>=10*PAGE_SIZE && scope<FLUSH_SCOPE_ALL)
-	        scope=FLUSH_SCOPE_ALL;
-	    if (CPU_IS_040) {
-		ret = cache_flush_040 (addr, scope, cache, len);
-	    } else if (CPU_IS_060) {
-		ret = cache_flush_060 (addr, scope, cache, len);
-	    }
-	}
-out:
-	return ret;
-}
-
-/* This syscall gets its arguments in A0 (mem), D2 (oldval) and
-   D1 (newval).  */
-asmlinkage int
-sys_atomic_cmpxchg_32(unsigned long newval, int oldval, int d3, int d4, int d5,
-		      unsigned long __user * mem)
-{
-	/* This was borrowed from ARM's implementation.  */
-	for (;;) {
-		struct mm_struct *mm = current->mm;
-		pgd_t *pgd;
-		pmd_t *pmd;
-		pte_t *pte;
-		spinlock_t *ptl;
-		unsigned long mem_value;
-
-		down_read(&mm->mmap_sem);
-		pgd = pgd_offset(mm, (unsigned long)mem);
-		if (!pgd_present(*pgd))
-			goto bad_access;
-		pmd = pmd_offset(pgd, (unsigned long)mem);
-		if (!pmd_present(*pmd))
-			goto bad_access;
-		pte = pte_offset_map_lock(mm, pmd, (unsigned long)mem, &ptl);
-		if (!pte_present(*pte) || !pte_dirty(*pte)
-		    || !pte_write(*pte)) {
-			pte_unmap_unlock(pte, ptl);
-			goto bad_access;
-		}
-
-		mem_value = *mem;
-		if (mem_value == oldval)
-			*mem = newval;
-
-		pte_unmap_unlock(pte, ptl);
-		up_read(&mm->mmap_sem);
-		return mem_value;
-
-	      bad_access:
-		up_read(&mm->mmap_sem);
-		/* This is not necessarily a bad access, we can get here if
-		   a memory we're trying to write to should be copied-on-write.
-		   Make the kernel do the necessary page stuff, then re-iterate.
-		   Simulate a write access fault to do that.  */
-		{
-			/* The first argument of the function corresponds to
-			   D1, which is the first field of struct pt_regs.  */
-			struct pt_regs *fp = (struct pt_regs *)&newval;
-
-			/* '3' is an RMW flag.  */
-			if (do_page_fault(fp, (unsigned long)mem, 3))
-				/* If the do_page_fault() failed, we don't
-				   have anything meaningful to return.
-				   There should be a SIGSEGV pending for
-				   the process.  */
-				return 0xdeadbeef;
-		}
-	}
-}
-
-#else
-
-/* sys_cacheflush -- flush (part of) the processor cache.  */
-asmlinkage int
-sys_cacheflush (unsigned long addr, int scope, int cache, unsigned long len)
-{
-	flush_cache_all();
-	return 0;
-}
-
-/* This syscall gets its arguments in A0 (mem), D2 (oldval) and
-   D1 (newval).  */
-asmlinkage int
-sys_atomic_cmpxchg_32(unsigned long newval, int oldval, int d3, int d4, int d5,
-		      unsigned long __user * mem)
-{
-	struct mm_struct *mm = current->mm;
-	unsigned long mem_value;
-
-	down_read(&mm->mmap_sem);
-
-	mem_value = *mem;
-	if (mem_value == oldval)
-		*mem = newval;
-
-	up_read(&mm->mmap_sem);
-	return mem_value;
-}
-
-#endif /* CONFIG_MMU */
-
-asmlinkage int sys_getpagesize(void)
-{
-	return PAGE_SIZE;
-}
-
-/*
- * Do a system call from kernel instead of calling sys_execve so we
- * end up with proper pt_regs.
- */
-int kernel_execve(const char *filename,
-		  const char *const argv[],
-		  const char *const envp[])
-{
-	register long __res asm ("%d0") = __NR_execve;
-	register long __a asm ("%d1") = (long)(filename);
-	register long __b asm ("%d2") = (long)(argv);
-	register long __c asm ("%d3") = (long)(envp);
-	asm volatile ("trap  #0" : "+d" (__res)
-			: "d" (__a), "d" (__b), "d" (__c));
-	return __res;
-}
-
-asmlinkage unsigned long sys_get_thread_area(void)
-{
-	return current_thread_info()->tp_value;
-}
-
-asmlinkage int sys_set_thread_area(unsigned long tp)
-{
-	current_thread_info()->tp_value = tp;
-	return 0;
-}
-
-asmlinkage int sys_atomic_barrier(void)
-{
-	/* no code needed for uniprocs */
-	return 0;
-}
diff --git a/ANDROID_3.4.5/arch/m68k/kernel/syscalltable.S b/ANDROID_3.4.5/arch/m68k/kernel/syscalltable.S
deleted file mode 100644
index ce827b37..00000000
--- a/ANDROID_3.4.5/arch/m68k/kernel/syscalltable.S
+++ /dev/null
@@ -1,370 +0,0 @@
-/*
- *  Copyright (C) 2002, Greg Ungerer (gerg@snapgear.com)
- *
- *  Based on older entry.S files, the following copyrights apply:
- *
- *  Copyright (C) 1998  D. Jeff Dionne <jeff@lineo.ca>,
- *                      Kenneth Albanowski <kjahds@kjahds.com>,
- *  Copyright (C) 2000  Lineo Inc. (www.lineo.com) 
- *  Copyright (C) 1991, 1992  Linus Torvalds
- *
- *  Linux/m68k support by Hamish Macdonald
- */
-
-#include <linux/linkage.h>
-
-#ifndef CONFIG_MMU
-#define sys_mmap2		sys_mmap_pgoff
-#endif
-
-.section .rodata
-ALIGN
-ENTRY(sys_call_table)
-	.long sys_restart_syscall	/* 0 - old "setup()" system call, used for restarting */
-	.long sys_exit
-	.long sys_fork
-	.long sys_read
-	.long sys_write
-	.long sys_open			/* 5 */
-	.long sys_close
-	.long sys_waitpid
-	.long sys_creat
-	.long sys_link
-	.long sys_unlink		/* 10 */
-	.long sys_execve
-	.long sys_chdir
-	.long sys_time
-	.long sys_mknod
-	.long sys_chmod			/* 15 */
-	.long sys_chown16
-	.long sys_ni_syscall		/* old break syscall holder */
-	.long sys_stat
-	.long sys_lseek
-	.long sys_getpid		/* 20 */
-	.long sys_mount
-	.long sys_oldumount
-	.long sys_setuid16
-	.long sys_getuid16
-	.long sys_stime			/* 25 */
-	.long sys_ptrace
-	.long sys_alarm
-	.long sys_fstat
-	.long sys_pause
-	.long sys_utime			/* 30 */
-	.long sys_ni_syscall		/* old stty syscall holder */
-	.long sys_ni_syscall		/* old gtty syscall holder */
-	.long sys_access
-	.long sys_nice
-	.long sys_ni_syscall		/* 35 - old ftime syscall holder */
-	.long sys_sync
-	.long sys_kill
-	.long sys_rename
-	.long sys_mkdir
-	.long sys_rmdir			/* 40 */
-	.long sys_dup
-	.long sys_pipe
-	.long sys_times
-	.long sys_ni_syscall		/* old prof syscall holder */
-	.long sys_brk			/* 45 */
-	.long sys_setgid16
-	.long sys_getgid16
-	.long sys_signal
-	.long sys_geteuid16
-	.long sys_getegid16		/* 50 */
-	.long sys_acct
-	.long sys_umount		/* recycled never used phys() */
-	.long sys_ni_syscall		/* old lock syscall holder */
-	.long sys_ioctl
-	.long sys_fcntl			/* 55 */
-	.long sys_ni_syscall		/* old mpx syscall holder */
-	.long sys_setpgid
-	.long sys_ni_syscall		/* old ulimit syscall holder */
-	.long sys_ni_syscall
-	.long sys_umask			/* 60 */
-	.long sys_chroot
-	.long sys_ustat
-	.long sys_dup2
-	.long sys_getppid
-	.long sys_getpgrp		/* 65 */
-	.long sys_setsid
-	.long sys_sigaction
-	.long sys_sgetmask
-	.long sys_ssetmask
-	.long sys_setreuid16		/* 70 */
-	.long sys_setregid16
-	.long sys_sigsuspend
-	.long sys_sigpending
-	.long sys_sethostname
-	.long sys_setrlimit		/* 75 */
-	.long sys_old_getrlimit
-	.long sys_getrusage
-	.long sys_gettimeofday
-	.long sys_settimeofday
-	.long sys_getgroups16		/* 80 */
-	.long sys_setgroups16
-	.long sys_old_select
-	.long sys_symlink
-	.long sys_lstat
-	.long sys_readlink		/* 85 */
-	.long sys_uselib
-	.long sys_swapon
-	.long sys_reboot
-	.long sys_old_readdir
-	.long sys_old_mmap		/* 90 */
-	.long sys_munmap
-	.long sys_truncate
-	.long sys_ftruncate
-	.long sys_fchmod
-	.long sys_fchown16		/* 95 */
-	.long sys_getpriority
-	.long sys_setpriority
-	.long sys_ni_syscall		/* old profil syscall holder */
-	.long sys_statfs
-	.long sys_fstatfs		/* 100 */
-	.long sys_ni_syscall		/* ioperm for i386 */
-	.long sys_socketcall
-	.long sys_syslog
-	.long sys_setitimer
-	.long sys_getitimer		/* 105 */
-	.long sys_newstat
-	.long sys_newlstat
-	.long sys_newfstat
-	.long sys_ni_syscall
-	.long sys_ni_syscall		/* 110 - iopl for i386 */
-	.long sys_vhangup
-	.long sys_ni_syscall		/* obsolete idle() syscall */
-	.long sys_ni_syscall		/* vm86old for i386 */
-	.long sys_wait4
-	.long sys_swapoff		/* 115 */
-	.long sys_sysinfo
-	.long sys_ipc
-	.long sys_fsync
-	.long sys_sigreturn
-	.long sys_clone			/* 120 */
-	.long sys_setdomainname
-	.long sys_newuname
-	.long sys_cacheflush		/* modify_ldt for i386 */
-	.long sys_adjtimex
-	.long sys_mprotect		/* 125 */
-	.long sys_sigprocmask
-	.long sys_ni_syscall		/* old "create_module" */
-	.long sys_init_module
-	.long sys_delete_module
-	.long sys_ni_syscall		/* 130 - old "get_kernel_syms" */
-	.long sys_quotactl
-	.long sys_getpgid
-	.long sys_fchdir
-	.long sys_bdflush
-	.long sys_sysfs			/* 135 */
-	.long sys_personality
-	.long sys_ni_syscall		/* for afs_syscall */
-	.long sys_setfsuid16
-	.long sys_setfsgid16
-	.long sys_llseek		/* 140 */
-	.long sys_getdents
-	.long sys_select
-	.long sys_flock
-	.long sys_msync
-	.long sys_readv			/* 145 */
-	.long sys_writev
-	.long sys_getsid
-	.long sys_fdatasync
-	.long sys_sysctl
-	.long sys_mlock			/* 150 */
-	.long sys_munlock
-	.long sys_mlockall
-	.long sys_munlockall
-	.long sys_sched_setparam
-	.long sys_sched_getparam	/* 155 */
-	.long sys_sched_setscheduler
-	.long sys_sched_getscheduler
-	.long sys_sched_yield
-	.long sys_sched_get_priority_max
-	.long sys_sched_get_priority_min  /* 160 */
-	.long sys_sched_rr_get_interval
-	.long sys_nanosleep
-	.long sys_mremap
-	.long sys_setresuid16
-	.long sys_getresuid16		/* 165 */
-	.long sys_getpagesize
-	.long sys_ni_syscall		/* old "query_module" */
-	.long sys_poll
-	.long sys_ni_syscall		/* old nfsservctl */
-	.long sys_setresgid16		/* 170 */
-	.long sys_getresgid16
-	.long sys_prctl
-	.long sys_rt_sigreturn
-	.long sys_rt_sigaction
-	.long sys_rt_sigprocmask	/* 175 */
-	.long sys_rt_sigpending
-	.long sys_rt_sigtimedwait
-	.long sys_rt_sigqueueinfo
-	.long sys_rt_sigsuspend
-	.long sys_pread64		/* 180 */
-	.long sys_pwrite64
-	.long sys_lchown16
-	.long sys_getcwd
-	.long sys_capget
-	.long sys_capset		/* 185 */
-	.long sys_sigaltstack
-	.long sys_sendfile
-	.long sys_ni_syscall		/* streams1 */
-	.long sys_ni_syscall		/* streams2 */
-	.long sys_vfork			/* 190 */
-	.long sys_getrlimit
-	.long sys_mmap2
-	.long sys_truncate64
-	.long sys_ftruncate64
-	.long sys_stat64		/* 195 */
-	.long sys_lstat64
-	.long sys_fstat64
-	.long sys_chown
-	.long sys_getuid
-	.long sys_getgid		/* 200 */
-	.long sys_geteuid
-	.long sys_getegid
-	.long sys_setreuid
-	.long sys_setregid
-	.long sys_getgroups		/* 205 */
-	.long sys_setgroups
-	.long sys_fchown
-	.long sys_setresuid
-	.long sys_getresuid
-	.long sys_setresgid		/* 210 */
-	.long sys_getresgid
-	.long sys_lchown
-	.long sys_setuid
-	.long sys_setgid
-	.long sys_setfsuid		/* 215 */
-	.long sys_setfsgid
-	.long sys_pivot_root
-	.long sys_ni_syscall
-	.long sys_ni_syscall
-	.long sys_getdents64		/* 220 */
-	.long sys_gettid
-	.long sys_tkill
-	.long sys_setxattr
-	.long sys_lsetxattr
-	.long sys_fsetxattr		/* 225 */
-	.long sys_getxattr
-	.long sys_lgetxattr
-	.long sys_fgetxattr
-	.long sys_listxattr
-	.long sys_llistxattr		/* 230 */
-	.long sys_flistxattr
-	.long sys_removexattr
-	.long sys_lremovexattr
-	.long sys_fremovexattr
-	.long sys_futex			/* 235 */
-	.long sys_sendfile64
-	.long sys_mincore
-	.long sys_madvise
-	.long sys_fcntl64
-	.long sys_readahead		/* 240 */
-	.long sys_io_setup
-	.long sys_io_destroy
-	.long sys_io_getevents
-	.long sys_io_submit
-	.long sys_io_cancel		/* 245 */
-	.long sys_fadvise64
-	.long sys_exit_group
-	.long sys_lookup_dcookie
-	.long sys_epoll_create
-	.long sys_epoll_ctl		/* 250 */
-	.long sys_epoll_wait
-	.long sys_remap_file_pages
-	.long sys_set_tid_address
-	.long sys_timer_create
-	.long sys_timer_settime		/* 255 */
-	.long sys_timer_gettime
-	.long sys_timer_getoverrun
-	.long sys_timer_delete
-	.long sys_clock_settime
-	.long sys_clock_gettime		/* 260 */
-	.long sys_clock_getres
-	.long sys_clock_nanosleep
-	.long sys_statfs64
-	.long sys_fstatfs64
-	.long sys_tgkill		/* 265 */
-	.long sys_utimes
-	.long sys_fadvise64_64
-	.long sys_mbind
-	.long sys_get_mempolicy
-	.long sys_set_mempolicy		/* 270 */
-	.long sys_mq_open
-	.long sys_mq_unlink
-	.long sys_mq_timedsend
-	.long sys_mq_timedreceive
-	.long sys_mq_notify		/* 275 */
-	.long sys_mq_getsetattr
-	.long sys_waitid
-	.long sys_ni_syscall		/* for sys_vserver */
-	.long sys_add_key
-	.long sys_request_key		/* 280 */
-	.long sys_keyctl
-	.long sys_ioprio_set
-	.long sys_ioprio_get
-	.long sys_inotify_init
-	.long sys_inotify_add_watch	/* 285 */
-	.long sys_inotify_rm_watch
-	.long sys_migrate_pages
-	.long sys_openat
-	.long sys_mkdirat
-	.long sys_mknodat		/* 290 */
-	.long sys_fchownat
-	.long sys_futimesat
-	.long sys_fstatat64
-	.long sys_unlinkat
-	.long sys_renameat		/* 295 */
-	.long sys_linkat
-	.long sys_symlinkat
-	.long sys_readlinkat
-	.long sys_fchmodat
-	.long sys_faccessat		/* 300 */
-	.long sys_pselect6
-	.long sys_ppoll
-	.long sys_unshare
-	.long sys_set_robust_list
-	.long sys_get_robust_list	/* 305 */
-	.long sys_splice
-	.long sys_sync_file_range
-	.long sys_tee
-	.long sys_vmsplice
-	.long sys_move_pages		/* 310 */
-	.long sys_sched_setaffinity
-	.long sys_sched_getaffinity
-	.long sys_kexec_load
-	.long sys_getcpu
-	.long sys_epoll_pwait		/* 315 */
-	.long sys_utimensat
-	.long sys_signalfd
-	.long sys_timerfd_create
-	.long sys_eventfd
-	.long sys_fallocate		/* 320 */
-	.long sys_timerfd_settime
-	.long sys_timerfd_gettime
-	.long sys_signalfd4
-	.long sys_eventfd2
-	.long sys_epoll_create1		/* 325 */
-	.long sys_dup3
-	.long sys_pipe2
-	.long sys_inotify_init1
-	.long sys_preadv
-	.long sys_pwritev		/* 330 */
-	.long sys_rt_tgsigqueueinfo
-	.long sys_perf_event_open
-	.long sys_get_thread_area
-	.long sys_set_thread_area
-	.long sys_atomic_cmpxchg_32	/* 335 */
-	.long sys_atomic_barrier
-	.long sys_fanotify_init
-	.long sys_fanotify_mark
-	.long sys_prlimit64
-	.long sys_name_to_handle_at	/* 340 */
-	.long sys_open_by_handle_at
-	.long sys_clock_adjtime
-	.long sys_syncfs
-	.long sys_setns
-	.long sys_process_vm_readv	/* 345 */
-	.long sys_process_vm_writev
-
diff --git a/ANDROID_3.4.5/arch/m68k/kernel/time.c b/ANDROID_3.4.5/arch/m68k/kernel/time.c
deleted file mode 100644
index d7deb7fc..00000000
--- a/ANDROID_3.4.5/arch/m68k/kernel/time.c
+++ /dev/null
@@ -1,111 +0,0 @@
-/*
- *  linux/arch/m68k/kernel/time.c
- *
- *  Copyright (C) 1991, 1992, 1995  Linus Torvalds
- *
- * This file contains the m68k-specific time handling details.
- * Most of the stuff is located in the machine specific files.
- *
- * 1997-09-10	Updated NTP code according to technical memorandum Jan '96
- *		"A Kernel Model for Precision Timekeeping" by Dave Mills
- */
-
-#include <linux/errno.h>
-#include <linux/module.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/rtc.h>
-#include <linux/platform_device.h>
-
-#include <asm/machdep.h>
-#include <asm/io.h>
-#include <asm/irq_regs.h>
-
-#include <linux/time.h>
-#include <linux/timex.h>
-#include <linux/profile.h>
-
-/*
- * timer_interrupt() needs to keep up the real-time clock,
- * as well as call the "xtime_update()" routine every clocktick
- */
-static irqreturn_t timer_interrupt(int irq, void *dummy)
-{
-	xtime_update(1);
-	update_process_times(user_mode(get_irq_regs()));
-	profile_tick(CPU_PROFILING);
-
-#ifdef CONFIG_HEARTBEAT
-	/* use power LED as a heartbeat instead -- much more useful
-	   for debugging -- based on the version for PReP by Cort */
-	/* acts like an actual heart beat -- ie thump-thump-pause... */
-	if (mach_heartbeat) {
-	    static unsigned cnt = 0, period = 0, dist = 0;
-
-	    if (cnt == 0 || cnt == dist)
-		mach_heartbeat( 1 );
-	    else if (cnt == 7 || cnt == dist+7)
-		mach_heartbeat( 0 );
-
-	    if (++cnt > period) {
-		cnt = 0;
-		/* The hyperbolic function below modifies the heartbeat period
-		 * length in dependency of the current (5min) load. It goes
-		 * through the points f(0)=126, f(1)=86, f(5)=51,
-		 * f(inf)->30. */
-		period = ((672<<FSHIFT)/(5*avenrun[0]+(7<<FSHIFT))) + 30;
-		dist = period / 4;
-	    }
-	}
-#endif /* CONFIG_HEARTBEAT */
-	return IRQ_HANDLED;
-}
-
-void read_persistent_clock(struct timespec *ts)
-{
-	struct rtc_time time;
-	ts->tv_sec = 0;
-	ts->tv_nsec = 0;
-
-	if (mach_hwclk) {
-		mach_hwclk(0, &time);
-
-		if ((time.tm_year += 1900) < 1970)
-			time.tm_year += 100;
-		ts->tv_sec = mktime(time.tm_year, time.tm_mon, time.tm_mday,
-				      time.tm_hour, time.tm_min, time.tm_sec);
-	}
-}
-
-void __init time_init(void)
-{
-	mach_sched_init(timer_interrupt);
-}
-
-#ifdef CONFIG_M68KCLASSIC
-
-u32 arch_gettimeoffset(void)
-{
-	return mach_gettimeoffset() * 1000;
-}
-
-static int __init rtc_init(void)
-{
-	struct platform_device *pdev;
-
-	if (!mach_hwclk)
-		return -ENODEV;
-
-	pdev = platform_device_register_simple("rtc-generic", -1, NULL, 0);
-	if (IS_ERR(pdev))
-		return PTR_ERR(pdev);
-
-	return 0;
-}
-
-module_init(rtc_init);
-
-#endif /* CONFIG_M68KCLASSIC */
diff --git a/ANDROID_3.4.5/arch/m68k/kernel/traps.c b/ANDROID_3.4.5/arch/m68k/kernel/traps.c
deleted file mode 100644
index 388e5cc8..00000000
--- a/ANDROID_3.4.5/arch/m68k/kernel/traps.c
+++ /dev/null
@@ -1,1208 +0,0 @@
-/*
- *  linux/arch/m68k/kernel/traps.c
- *
- *  Copyright (C) 1993, 1994 by Hamish Macdonald
- *
- *  68040 fixes by Michael Rausch
- *  68040 fixes by Martin Apel
- *  68040 fixes and writeback by Richard Zidlicky
- *  68060 fixes by Roman Hodek
- *  68060 fixes by Jesper Skov
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file COPYING in the main directory of this archive
- * for more details.
- */
-
-/*
- * Sets up all exception vectors
- */
-
-#include <linux/sched.h>
-#include <linux/signal.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/user.h>
-#include <linux/string.h>
-#include <linux/linkage.h>
-#include <linux/init.h>
-#include <linux/ptrace.h>
-#include <linux/kallsyms.h>
-
-#include <asm/setup.h>
-#include <asm/fpu.h>
-#include <asm/uaccess.h>
-#include <asm/traps.h>
-#include <asm/pgalloc.h>
-#include <asm/machdep.h>
-#include <asm/siginfo.h>
-
-
-static const char *vec_names[] = {
-	[VEC_RESETSP]	= "RESET SP",
-	[VEC_RESETPC]	= "RESET PC",
-	[VEC_BUSERR]	= "BUS ERROR",
-	[VEC_ADDRERR]	= "ADDRESS ERROR",
-	[VEC_ILLEGAL]	= "ILLEGAL INSTRUCTION",
-	[VEC_ZERODIV]	= "ZERO DIVIDE",
-	[VEC_CHK]	= "CHK",
-	[VEC_TRAP]	= "TRAPcc",
-	[VEC_PRIV]	= "PRIVILEGE VIOLATION",
-	[VEC_TRACE]	= "TRACE",
-	[VEC_LINE10]	= "LINE 1010",
-	[VEC_LINE11]	= "LINE 1111",
-	[VEC_RESV12]	= "UNASSIGNED RESERVED 12",
-	[VEC_COPROC]	= "COPROCESSOR PROTOCOL VIOLATION",
-	[VEC_FORMAT]	= "FORMAT ERROR",
-	[VEC_UNINT]	= "UNINITIALIZED INTERRUPT",
-	[VEC_RESV16]	= "UNASSIGNED RESERVED 16",
-	[VEC_RESV17]	= "UNASSIGNED RESERVED 17",
-	[VEC_RESV18]	= "UNASSIGNED RESERVED 18",
-	[VEC_RESV19]	= "UNASSIGNED RESERVED 19",
-	[VEC_RESV20]	= "UNASSIGNED RESERVED 20",
-	[VEC_RESV21]	= "UNASSIGNED RESERVED 21",
-	[VEC_RESV22]	= "UNASSIGNED RESERVED 22",
-	[VEC_RESV23]	= "UNASSIGNED RESERVED 23",
-	[VEC_SPUR]	= "SPURIOUS INTERRUPT",
-	[VEC_INT1]	= "LEVEL 1 INT",
-	[VEC_INT2]	= "LEVEL 2 INT",
-	[VEC_INT3]	= "LEVEL 3 INT",
-	[VEC_INT4]	= "LEVEL 4 INT",
-	[VEC_INT5]	= "LEVEL 5 INT",
-	[VEC_INT6]	= "LEVEL 6 INT",
-	[VEC_INT7]	= "LEVEL 7 INT",
-	[VEC_SYS]	= "SYSCALL",
-	[VEC_TRAP1]	= "TRAP #1",
-	[VEC_TRAP2]	= "TRAP #2",
-	[VEC_TRAP3]	= "TRAP #3",
-	[VEC_TRAP4]	= "TRAP #4",
-	[VEC_TRAP5]	= "TRAP #5",
-	[VEC_TRAP6]	= "TRAP #6",
-	[VEC_TRAP7]	= "TRAP #7",
-	[VEC_TRAP8]	= "TRAP #8",
-	[VEC_TRAP9]	= "TRAP #9",
-	[VEC_TRAP10]	= "TRAP #10",
-	[VEC_TRAP11]	= "TRAP #11",
-	[VEC_TRAP12]	= "TRAP #12",
-	[VEC_TRAP13]	= "TRAP #13",
-	[VEC_TRAP14]	= "TRAP #14",
-	[VEC_TRAP15]	= "TRAP #15",
-	[VEC_FPBRUC]	= "FPCP BSUN",
-	[VEC_FPIR]	= "FPCP INEXACT",
-	[VEC_FPDIVZ]	= "FPCP DIV BY 0",
-	[VEC_FPUNDER]	= "FPCP UNDERFLOW",
-	[VEC_FPOE]	= "FPCP OPERAND ERROR",
-	[VEC_FPOVER]	= "FPCP OVERFLOW",
-	[VEC_FPNAN]	= "FPCP SNAN",
-	[VEC_FPUNSUP]	= "FPCP UNSUPPORTED OPERATION",
-	[VEC_MMUCFG]	= "MMU CONFIGURATION ERROR",
-	[VEC_MMUILL]	= "MMU ILLEGAL OPERATION ERROR",
-	[VEC_MMUACC]	= "MMU ACCESS LEVEL VIOLATION ERROR",
-	[VEC_RESV59]	= "UNASSIGNED RESERVED 59",
-	[VEC_UNIMPEA]	= "UNASSIGNED RESERVED 60",
-	[VEC_UNIMPII]	= "UNASSIGNED RESERVED 61",
-	[VEC_RESV62]	= "UNASSIGNED RESERVED 62",
-	[VEC_RESV63]	= "UNASSIGNED RESERVED 63",
-};
-
-static const char *space_names[] = {
-	[0]		= "Space 0",
-	[USER_DATA]	= "User Data",
-	[USER_PROGRAM]	= "User Program",
-#ifndef CONFIG_SUN3
-	[3]		= "Space 3",
-#else
-	[FC_CONTROL]	= "Control",
-#endif
-	[4]		= "Space 4",
-	[SUPER_DATA]	= "Super Data",
-	[SUPER_PROGRAM]	= "Super Program",
-	[CPU_SPACE]	= "CPU"
-};
-
-void die_if_kernel(char *,struct pt_regs *,int);
-asmlinkage int do_page_fault(struct pt_regs *regs, unsigned long address,
-                             unsigned long error_code);
-int send_fault_sig(struct pt_regs *regs);
-
-asmlinkage void trap_c(struct frame *fp);
-
-#if defined (CONFIG_M68060)
-static inline void access_error060 (struct frame *fp)
-{
-	unsigned long fslw = fp->un.fmt4.pc; /* is really FSLW for access error */
-
-#ifdef DEBUG
-	printk("fslw=%#lx, fa=%#lx\n", fslw, fp->un.fmt4.effaddr);
-#endif
-
-	if (fslw & MMU060_BPE) {
-		/* branch prediction error -> clear branch cache */
-		__asm__ __volatile__ ("movec %/cacr,%/d0\n\t"
-				      "orl   #0x00400000,%/d0\n\t"
-				      "movec %/d0,%/cacr"
-				      : : : "d0" );
-		/* return if there's no other error */
-		if (!(fslw & MMU060_ERR_BITS) && !(fslw & MMU060_SEE))
-			return;
-	}
-
-	if (fslw & (MMU060_DESC_ERR | MMU060_WP | MMU060_SP)) {
-		unsigned long errorcode;
-		unsigned long addr = fp->un.fmt4.effaddr;
-
-		if (fslw & MMU060_MA)
-			addr = (addr + PAGE_SIZE - 1) & PAGE_MASK;
-
-		errorcode = 1;
-		if (fslw & MMU060_DESC_ERR) {
-			__flush_tlb040_one(addr);
-			errorcode = 0;
-		}
-		if (fslw & MMU060_W)
-			errorcode |= 2;
-#ifdef DEBUG
-		printk("errorcode = %d\n", errorcode );
-#endif
-		do_page_fault(&fp->ptregs, addr, errorcode);
-	} else if (fslw & (MMU060_SEE)){
-		/* Software Emulation Error.
-		 * fault during mem_read/mem_write in ifpsp060/os.S
-		 */
-		send_fault_sig(&fp->ptregs);
-	} else if (!(fslw & (MMU060_RE|MMU060_WE)) ||
-		   send_fault_sig(&fp->ptregs) > 0) {
-		printk("pc=%#lx, fa=%#lx\n", fp->ptregs.pc, fp->un.fmt4.effaddr);
-		printk( "68060 access error, fslw=%lx\n", fslw );
-		trap_c( fp );
-	}
-}
-#endif /* CONFIG_M68060 */
-
-#if defined (CONFIG_M68040)
-static inline unsigned long probe040(int iswrite, unsigned long addr, int wbs)
-{
-	unsigned long mmusr;
-	mm_segment_t old_fs = get_fs();
-
-	set_fs(MAKE_MM_SEG(wbs));
-
-	if (iswrite)
-		asm volatile (".chip 68040; ptestw (%0); .chip 68k" : : "a" (addr));
-	else
-		asm volatile (".chip 68040; ptestr (%0); .chip 68k" : : "a" (addr));
-
-	asm volatile (".chip 68040; movec %%mmusr,%0; .chip 68k" : "=r" (mmusr));
-
-	set_fs(old_fs);
-
-	return mmusr;
-}
-
-static inline int do_040writeback1(unsigned short wbs, unsigned long wba,
-				   unsigned long wbd)
-{
-	int res = 0;
-	mm_segment_t old_fs = get_fs();
-
-	/* set_fs can not be moved, otherwise put_user() may oops */
-	set_fs(MAKE_MM_SEG(wbs));
-
-	switch (wbs & WBSIZ_040) {
-	case BA_SIZE_BYTE:
-		res = put_user(wbd & 0xff, (char __user *)wba);
-		break;
-	case BA_SIZE_WORD:
-		res = put_user(wbd & 0xffff, (short __user *)wba);
-		break;
-	case BA_SIZE_LONG:
-		res = put_user(wbd, (int __user *)wba);
-		break;
-	}
-
-	/* set_fs can not be moved, otherwise put_user() may oops */
-	set_fs(old_fs);
-
-
-#ifdef DEBUG
-	printk("do_040writeback1, res=%d\n",res);
-#endif
-
-	return res;
-}
-
-/* after an exception in a writeback the stack frame corresponding
- * to that exception is discarded, set a few bits in the old frame
- * to simulate what it should look like
- */
-static inline void fix_xframe040(struct frame *fp, unsigned long wba, unsigned short wbs)
-{
-	fp->un.fmt7.faddr = wba;
-	fp->un.fmt7.ssw = wbs & 0xff;
-	if (wba != current->thread.faddr)
-	    fp->un.fmt7.ssw |= MA_040;
-}
-
-static inline void do_040writebacks(struct frame *fp)
-{
-	int res = 0;
-#if 0
-	if (fp->un.fmt7.wb1s & WBV_040)
-		printk("access_error040: cannot handle 1st writeback. oops.\n");
-#endif
-
-	if ((fp->un.fmt7.wb2s & WBV_040) &&
-	    !(fp->un.fmt7.wb2s & WBTT_040)) {
-		res = do_040writeback1(fp->un.fmt7.wb2s, fp->un.fmt7.wb2a,
-				       fp->un.fmt7.wb2d);
-		if (res)
-			fix_xframe040(fp, fp->un.fmt7.wb2a, fp->un.fmt7.wb2s);
-		else
-			fp->un.fmt7.wb2s = 0;
-	}
-
-	/* do the 2nd wb only if the first one was successful (except for a kernel wb) */
-	if (fp->un.fmt7.wb3s & WBV_040 && (!res || fp->un.fmt7.wb3s & 4)) {
-		res = do_040writeback1(fp->un.fmt7.wb3s, fp->un.fmt7.wb3a,
-				       fp->un.fmt7.wb3d);
-		if (res)
-		    {
-			fix_xframe040(fp, fp->un.fmt7.wb3a, fp->un.fmt7.wb3s);
-
-			fp->un.fmt7.wb2s = fp->un.fmt7.wb3s;
-			fp->un.fmt7.wb3s &= (~WBV_040);
-			fp->un.fmt7.wb2a = fp->un.fmt7.wb3a;
-			fp->un.fmt7.wb2d = fp->un.fmt7.wb3d;
-		    }
-		else
-			fp->un.fmt7.wb3s = 0;
-	}
-
-	if (res)
-		send_fault_sig(&fp->ptregs);
-}
-
-/*
- * called from sigreturn(), must ensure userspace code didn't
- * manipulate exception frame to circumvent protection, then complete
- * pending writebacks
- * we just clear TM2 to turn it into a userspace access
- */
-asmlinkage void berr_040cleanup(struct frame *fp)
-{
-	fp->un.fmt7.wb2s &= ~4;
-	fp->un.fmt7.wb3s &= ~4;
-
-	do_040writebacks(fp);
-}
-
-static inline void access_error040(struct frame *fp)
-{
-	unsigned short ssw = fp->un.fmt7.ssw;
-	unsigned long mmusr;
-
-#ifdef DEBUG
-	printk("ssw=%#x, fa=%#lx\n", ssw, fp->un.fmt7.faddr);
-        printk("wb1s=%#x, wb2s=%#x, wb3s=%#x\n", fp->un.fmt7.wb1s,
-		fp->un.fmt7.wb2s, fp->un.fmt7.wb3s);
-	printk ("wb2a=%lx, wb3a=%lx, wb2d=%lx, wb3d=%lx\n",
-		fp->un.fmt7.wb2a, fp->un.fmt7.wb3a,
-		fp->un.fmt7.wb2d, fp->un.fmt7.wb3d);
-#endif
-
-	if (ssw & ATC_040) {
-		unsigned long addr = fp->un.fmt7.faddr;
-		unsigned long errorcode;
-
-		/*
-		 * The MMU status has to be determined AFTER the address
-		 * has been corrected if there was a misaligned access (MA).
-		 */
-		if (ssw & MA_040)
-			addr = (addr + 7) & -8;
-
-		/* MMU error, get the MMUSR info for this access */
-		mmusr = probe040(!(ssw & RW_040), addr, ssw);
-#ifdef DEBUG
-		printk("mmusr = %lx\n", mmusr);
-#endif
-		errorcode = 1;
-		if (!(mmusr & MMU_R_040)) {
-			/* clear the invalid atc entry */
-			__flush_tlb040_one(addr);
-			errorcode = 0;
-		}
-
-		/* despite what documentation seems to say, RMW
-		 * accesses have always both the LK and RW bits set */
-		if (!(ssw & RW_040) || (ssw & LK_040))
-			errorcode |= 2;
-
-		if (do_page_fault(&fp->ptregs, addr, errorcode)) {
-#ifdef DEBUG
-			printk("do_page_fault() !=0\n");
-#endif
-			if (user_mode(&fp->ptregs)){
-				/* delay writebacks after signal delivery */
-#ifdef DEBUG
-			        printk(".. was usermode - return\n");
-#endif
-				return;
-			}
-			/* disable writeback into user space from kernel
-			 * (if do_page_fault didn't fix the mapping,
-                         * the writeback won't do good)
-			 */
-disable_wb:
-#ifdef DEBUG
-			printk(".. disabling wb2\n");
-#endif
-			if (fp->un.fmt7.wb2a == fp->un.fmt7.faddr)
-				fp->un.fmt7.wb2s &= ~WBV_040;
-			if (fp->un.fmt7.wb3a == fp->un.fmt7.faddr)
-				fp->un.fmt7.wb3s &= ~WBV_040;
-		}
-	} else {
-		/* In case of a bus error we either kill the process or expect
-		 * the kernel to catch the fault, which then is also responsible
-		 * for cleaning up the mess.
-		 */
-		current->thread.signo = SIGBUS;
-		current->thread.faddr = fp->un.fmt7.faddr;
-		if (send_fault_sig(&fp->ptregs) >= 0)
-			printk("68040 bus error (ssw=%x, faddr=%lx)\n", ssw,
-			       fp->un.fmt7.faddr);
-		goto disable_wb;
-	}
-
-	do_040writebacks(fp);
-}
-#endif /* CONFIG_M68040 */
-
-#if defined(CONFIG_SUN3)
-#include <asm/sun3mmu.h>
-
-extern int mmu_emu_handle_fault (unsigned long, int, int);
-
-/* sun3 version of bus_error030 */
-
-static inline void bus_error030 (struct frame *fp)
-{
-	unsigned char buserr_type = sun3_get_buserr ();
-	unsigned long addr, errorcode;
-	unsigned short ssw = fp->un.fmtb.ssw;
-	extern unsigned long _sun3_map_test_start, _sun3_map_test_end;
-
-#ifdef DEBUG
-	if (ssw & (FC | FB))
-		printk ("Instruction fault at %#010lx\n",
-			ssw & FC ?
-			fp->ptregs.format == 0xa ? fp->ptregs.pc + 2 : fp->un.fmtb.baddr - 2
-			:
-			fp->ptregs.format == 0xa ? fp->ptregs.pc + 4 : fp->un.fmtb.baddr);
-	if (ssw & DF)
-		printk ("Data %s fault at %#010lx in %s (pc=%#lx)\n",
-			ssw & RW ? "read" : "write",
-			fp->un.fmtb.daddr,
-			space_names[ssw & DFC], fp->ptregs.pc);
-#endif
-
-	/*
-	 * Check if this page should be demand-mapped. This needs to go before
-	 * the testing for a bad kernel-space access (demand-mapping applies
-	 * to kernel accesses too).
-	 */
-
-	if ((ssw & DF)
-	    && (buserr_type & (SUN3_BUSERR_PROTERR | SUN3_BUSERR_INVALID))) {
-		if (mmu_emu_handle_fault (fp->un.fmtb.daddr, ssw & RW, 0))
-			return;
-	}
-
-	/* Check for kernel-space pagefault (BAD). */
-	if (fp->ptregs.sr & PS_S) {
-		/* kernel fault must be a data fault to user space */
-		if (! ((ssw & DF) && ((ssw & DFC) == USER_DATA))) {
-		     // try checking the kernel mappings before surrender
-		     if (mmu_emu_handle_fault (fp->un.fmtb.daddr, ssw & RW, 1))
-			  return;
-			/* instruction fault or kernel data fault! */
-			if (ssw & (FC | FB))
-				printk ("Instruction fault at %#010lx\n",
-					fp->ptregs.pc);
-			if (ssw & DF) {
-				/* was this fault incurred testing bus mappings? */
-				if((fp->ptregs.pc >= (unsigned long)&_sun3_map_test_start) &&
-				   (fp->ptregs.pc <= (unsigned long)&_sun3_map_test_end)) {
-					send_fault_sig(&fp->ptregs);
-					return;
-				}
-
-				printk ("Data %s fault at %#010lx in %s (pc=%#lx)\n",
-					ssw & RW ? "read" : "write",
-					fp->un.fmtb.daddr,
-					space_names[ssw & DFC], fp->ptregs.pc);
-			}
-			printk ("BAD KERNEL BUSERR\n");
-
-			die_if_kernel("Oops", &fp->ptregs,0);
-			force_sig(SIGKILL, current);
-			return;
-		}
-	} else {
-		/* user fault */
-		if (!(ssw & (FC | FB)) && !(ssw & DF))
-			/* not an instruction fault or data fault! BAD */
-			panic ("USER BUSERR w/o instruction or data fault");
-	}
-
-
-	/* First handle the data fault, if any.  */
-	if (ssw & DF) {
-		addr = fp->un.fmtb.daddr;
-
-// errorcode bit 0:	0 -> no page		1 -> protection fault
-// errorcode bit 1:	0 -> read fault		1 -> write fault
-
-// (buserr_type & SUN3_BUSERR_PROTERR)	-> protection fault
-// (buserr_type & SUN3_BUSERR_INVALID)	-> invalid page fault
-
-		if (buserr_type & SUN3_BUSERR_PROTERR)
-			errorcode = 0x01;
-		else if (buserr_type & SUN3_BUSERR_INVALID)
-			errorcode = 0x00;
-		else {
-#ifdef DEBUG
-			printk ("*** unexpected busfault type=%#04x\n", buserr_type);
-			printk ("invalid %s access at %#lx from pc %#lx\n",
-				!(ssw & RW) ? "write" : "read", addr,
-				fp->ptregs.pc);
-#endif
-			die_if_kernel ("Oops", &fp->ptregs, buserr_type);
-			force_sig (SIGBUS, current);
-			return;
-		}
-
-//todo: wtf is RM bit? --m
-		if (!(ssw & RW) || ssw & RM)
-			errorcode |= 0x02;
-
-		/* Handle page fault. */
-		do_page_fault (&fp->ptregs, addr, errorcode);
-
-		/* Retry the data fault now. */
-		return;
-	}
-
-	/* Now handle the instruction fault. */
-
-	/* Get the fault address. */
-	if (fp->ptregs.format == 0xA)
-		addr = fp->ptregs.pc + 4;
-	else
-		addr = fp->un.fmtb.baddr;
-	if (ssw & FC)
-		addr -= 2;
-
-	if (buserr_type & SUN3_BUSERR_INVALID) {
-		if (!mmu_emu_handle_fault (fp->un.fmtb.daddr, 1, 0))
-			do_page_fault (&fp->ptregs, addr, 0);
-       } else {
-#ifdef DEBUG
-		printk ("protection fault on insn access (segv).\n");
-#endif
-		force_sig (SIGSEGV, current);
-       }
-}
-#else
-#if defined(CPU_M68020_OR_M68030)
-static inline void bus_error030 (struct frame *fp)
-{
-	volatile unsigned short temp;
-	unsigned short mmusr;
-	unsigned long addr, errorcode;
-	unsigned short ssw = fp->un.fmtb.ssw;
-#ifdef DEBUG
-	unsigned long desc;
-
-	printk ("pid = %x  ", current->pid);
-	printk ("SSW=%#06x  ", ssw);
-
-	if (ssw & (FC | FB))
-		printk ("Instruction fault at %#010lx\n",
-			ssw & FC ?
-			fp->ptregs.format == 0xa ? fp->ptregs.pc + 2 : fp->un.fmtb.baddr - 2
-			:
-			fp->ptregs.format == 0xa ? fp->ptregs.pc + 4 : fp->un.fmtb.baddr);
-	if (ssw & DF)
-		printk ("Data %s fault at %#010lx in %s (pc=%#lx)\n",
-			ssw & RW ? "read" : "write",
-			fp->un.fmtb.daddr,
-			space_names[ssw & DFC], fp->ptregs.pc);
-#endif
-
-	/* ++andreas: If a data fault and an instruction fault happen
-	   at the same time map in both pages.  */
-
-	/* First handle the data fault, if any.  */
-	if (ssw & DF) {
-		addr = fp->un.fmtb.daddr;
-
-#ifdef DEBUG
-		asm volatile ("ptestr %3,%2@,#7,%0\n\t"
-			      "pmove %%psr,%1"
-			      : "=a&" (desc), "=m" (temp)
-			      : "a" (addr), "d" (ssw));
-#else
-		asm volatile ("ptestr %2,%1@,#7\n\t"
-			      "pmove %%psr,%0"
-			      : "=m" (temp) : "a" (addr), "d" (ssw));
-#endif
-		mmusr = temp;
-
-#ifdef DEBUG
-		printk("mmusr is %#x for addr %#lx in task %p\n",
-		       mmusr, addr, current);
-		printk("descriptor address is %#lx, contents %#lx\n",
-		       __va(desc), *(unsigned long *)__va(desc));
-#endif
-
-		errorcode = (mmusr & MMU_I) ? 0 : 1;
-		if (!(ssw & RW) || (ssw & RM))
-			errorcode |= 2;
-
-		if (mmusr & (MMU_I | MMU_WP)) {
-			if (ssw & 4) {
-				printk("Data %s fault at %#010lx in %s (pc=%#lx)\n",
-				       ssw & RW ? "read" : "write",
-				       fp->un.fmtb.daddr,
-				       space_names[ssw & DFC], fp->ptregs.pc);
-				goto buserr;
-			}
-			/* Don't try to do anything further if an exception was
-			   handled. */
-			if (do_page_fault (&fp->ptregs, addr, errorcode) < 0)
-				return;
-		} else if (!(mmusr & MMU_I)) {
-			/* probably a 020 cas fault */
-			if (!(ssw & RM) && send_fault_sig(&fp->ptregs) > 0)
-				printk("unexpected bus error (%#x,%#x)\n", ssw, mmusr);
-		} else if (mmusr & (MMU_B|MMU_L|MMU_S)) {
-			printk("invalid %s access at %#lx from pc %#lx\n",
-			       !(ssw & RW) ? "write" : "read", addr,
-			       fp->ptregs.pc);
-			die_if_kernel("Oops",&fp->ptregs,mmusr);
-			force_sig(SIGSEGV, current);
-			return;
-		} else {
-#if 0
-			static volatile long tlong;
-#endif
-
-			printk("weird %s access at %#lx from pc %#lx (ssw is %#x)\n",
-			       !(ssw & RW) ? "write" : "read", addr,
-			       fp->ptregs.pc, ssw);
-			asm volatile ("ptestr #1,%1@,#0\n\t"
-				      "pmove %%psr,%0"
-				      : "=m" (temp)
-				      : "a" (addr));
-			mmusr = temp;
-
-			printk ("level 0 mmusr is %#x\n", mmusr);
-#if 0
-			asm volatile ("pmove %%tt0,%0"
-				      : "=m" (tlong));
-			printk("tt0 is %#lx, ", tlong);
-			asm volatile ("pmove %%tt1,%0"
-				      : "=m" (tlong));
-			printk("tt1 is %#lx\n", tlong);
-#endif
-#ifdef DEBUG
-			printk("Unknown SIGSEGV - 1\n");
-#endif
-			die_if_kernel("Oops",&fp->ptregs,mmusr);
-			force_sig(SIGSEGV, current);
-			return;
-		}
-
-		/* setup an ATC entry for the access about to be retried */
-		if (!(ssw & RW) || (ssw & RM))
-			asm volatile ("ploadw %1,%0@" : /* no outputs */
-				      : "a" (addr), "d" (ssw));
-		else
-			asm volatile ("ploadr %1,%0@" : /* no outputs */
-				      : "a" (addr), "d" (ssw));
-	}
-
-	/* Now handle the instruction fault. */
-
-	if (!(ssw & (FC|FB)))
-		return;
-
-	if (fp->ptregs.sr & PS_S) {
-		printk("Instruction fault at %#010lx\n",
-			fp->ptregs.pc);
-	buserr:
-		printk ("BAD KERNEL BUSERR\n");
-		die_if_kernel("Oops",&fp->ptregs,0);
-		force_sig(SIGKILL, current);
-		return;
-	}
-
-	/* get the fault address */
-	if (fp->ptregs.format == 10)
-		addr = fp->ptregs.pc + 4;
-	else
-		addr = fp->un.fmtb.baddr;
-	if (ssw & FC)
-		addr -= 2;
-
-	if ((ssw & DF) && ((addr ^ fp->un.fmtb.daddr) & PAGE_MASK) == 0)
-		/* Insn fault on same page as data fault.  But we
-		   should still create the ATC entry.  */
-		goto create_atc_entry;
-
-#ifdef DEBUG
-	asm volatile ("ptestr #1,%2@,#7,%0\n\t"
-		      "pmove %%psr,%1"
-		      : "=a&" (desc), "=m" (temp)
-		      : "a" (addr));
-#else
-	asm volatile ("ptestr #1,%1@,#7\n\t"
-		      "pmove %%psr,%0"
-		      : "=m" (temp) : "a" (addr));
-#endif
-	mmusr = temp;
-
-#ifdef DEBUG
-	printk ("mmusr is %#x for addr %#lx in task %p\n",
-		mmusr, addr, current);
-	printk ("descriptor address is %#lx, contents %#lx\n",
-		__va(desc), *(unsigned long *)__va(desc));
-#endif
-
-	if (mmusr & MMU_I)
-		do_page_fault (&fp->ptregs, addr, 0);
-	else if (mmusr & (MMU_B|MMU_L|MMU_S)) {
-		printk ("invalid insn access at %#lx from pc %#lx\n",
-			addr, fp->ptregs.pc);
-#ifdef DEBUG
-		printk("Unknown SIGSEGV - 2\n");
-#endif
-		die_if_kernel("Oops",&fp->ptregs,mmusr);
-		force_sig(SIGSEGV, current);
-		return;
-	}
-
-create_atc_entry:
-	/* setup an ATC entry for the access about to be retried */
-	asm volatile ("ploadr #2,%0@" : /* no outputs */
-		      : "a" (addr));
-}
-#endif /* CPU_M68020_OR_M68030 */
-#endif /* !CONFIG_SUN3 */
-
-#if defined(CONFIG_COLDFIRE) && defined(CONFIG_MMU)
-#include <asm/mcfmmu.h>
-
-/*
- *	The following table converts the FS encoding of a ColdFire
- *	exception stack frame into the error_code value needed by
- *	do_fault.
-*/
-static const unsigned char fs_err_code[] = {
-	0,  /* 0000 */
-	0,  /* 0001 */
-	0,  /* 0010 */
-	0,  /* 0011 */
-	1,  /* 0100 */
-	0,  /* 0101 */
-	0,  /* 0110 */
-	0,  /* 0111 */
-	2,  /* 1000 */
-	3,  /* 1001 */
-	2,  /* 1010 */
-	0,  /* 1011 */
-	1,  /* 1100 */
-	1,  /* 1101 */
-	0,  /* 1110 */
-	0   /* 1111 */
-};
-
-static inline void access_errorcf(unsigned int fs, struct frame *fp)
-{
-	unsigned long mmusr, addr;
-	unsigned int err_code;
-	int need_page_fault;
-
-	mmusr = mmu_read(MMUSR);
-	addr = mmu_read(MMUAR);
-
-	/*
-	 * error_code:
-	 *	bit 0 == 0 means no page found, 1 means protection fault
-	 *	bit 1 == 0 means read, 1 means write
-	 */
-	switch (fs) {
-	case  5:  /* 0101 TLB opword X miss */
-		need_page_fault = cf_tlb_miss(&fp->ptregs, 0, 0, 0);
-		addr = fp->ptregs.pc;
-		break;
-	case  6:  /* 0110 TLB extension word X miss */
-		need_page_fault = cf_tlb_miss(&fp->ptregs, 0, 0, 1);
-		addr = fp->ptregs.pc + sizeof(long);
-		break;
-	case 10:  /* 1010 TLB W miss */
-		need_page_fault = cf_tlb_miss(&fp->ptregs, 1, 1, 0);
-		break;
-	case 14: /* 1110 TLB R miss */
-		need_page_fault = cf_tlb_miss(&fp->ptregs, 0, 1, 0);
-		break;
-	default:
-		/* 0000 Normal  */
-		/* 0001 Reserved */
-		/* 0010 Interrupt during debug service routine */
-		/* 0011 Reserved */
-		/* 0100 X Protection */
-		/* 0111 IFP in emulator mode */
-		/* 1000 W Protection*/
-		/* 1001 Write error*/
-		/* 1011 Reserved*/
-		/* 1100 R Protection*/
-		/* 1101 R Protection*/
-		/* 1111 OEP in emulator mode*/
-		need_page_fault = 1;
-		break;
-	}
-
-	if (need_page_fault) {
-		err_code = fs_err_code[fs];
-		if ((fs == 13) && (mmusr & MMUSR_WF)) /* rd-mod-wr access */
-			err_code |= 2; /* bit1 - write, bit0 - protection */
-		do_page_fault(&fp->ptregs, addr, err_code);
-	}
-}
-#endif /* CONFIG_COLDFIRE CONFIG_MMU */
-
-asmlinkage void buserr_c(struct frame *fp)
-{
-	/* Only set esp0 if coming from user mode */
-	if (user_mode(&fp->ptregs))
-		current->thread.esp0 = (unsigned long) fp;
-
-#ifdef DEBUG
-	printk ("*** Bus Error *** Format is %x\n", fp->ptregs.format);
-#endif
-
-#if defined(CONFIG_COLDFIRE) && defined(CONFIG_MMU)
-	if (CPU_IS_COLDFIRE) {
-		unsigned int fs;
-		fs = (fp->ptregs.vector & 0x3) |
-			((fp->ptregs.vector & 0xc00) >> 8);
-		switch (fs) {
-		case 0x5:
-		case 0x6:
-		case 0x7:
-		case 0x9:
-		case 0xa:
-		case 0xd:
-		case 0xe:
-		case 0xf:
-			access_errorcf(fs, fp);
-			return;
-		default:
-			break;
-		}
-	}
-#endif /* CONFIG_COLDFIRE && CONFIG_MMU */
-
-	switch (fp->ptregs.format) {
-#if defined (CONFIG_M68060)
-	case 4:				/* 68060 access error */
-	  access_error060 (fp);
-	  break;
-#endif
-#if defined (CONFIG_M68040)
-	case 0x7:			/* 68040 access error */
-	  access_error040 (fp);
-	  break;
-#endif
-#if defined (CPU_M68020_OR_M68030)
-	case 0xa:
-	case 0xb:
-	  bus_error030 (fp);
-	  break;
-#endif
-	default:
-	  die_if_kernel("bad frame format",&fp->ptregs,0);
-#ifdef DEBUG
-	  printk("Unknown SIGSEGV - 4\n");
-#endif
-	  force_sig(SIGSEGV, current);
-	}
-}
-
-
-static int kstack_depth_to_print = 48;
-
-void show_trace(unsigned long *stack)
-{
-	unsigned long *endstack;
-	unsigned long addr;
-	int i;
-
-	printk("Call Trace:");
-	addr = (unsigned long)stack + THREAD_SIZE - 1;
-	endstack = (unsigned long *)(addr & -THREAD_SIZE);
-	i = 0;
-	while (stack + 1 <= endstack) {
-		addr = *stack++;
-		/*
-		 * If the address is either in the text segment of the
-		 * kernel, or in the region which contains vmalloc'ed
-		 * memory, it *may* be the address of a calling
-		 * routine; if so, print it so that someone tracing
-		 * down the cause of the crash will be able to figure
-		 * out the call path that was taken.
-		 */
-		if (__kernel_text_address(addr)) {
-#ifndef CONFIG_KALLSYMS
-			if (i % 5 == 0)
-				printk("\n       ");
-#endif
-			printk(" [<%08lx>] %pS\n", addr, (void *)addr);
-			i++;
-		}
-	}
-	printk("\n");
-}
-
-void show_registers(struct pt_regs *regs)
-{
-	struct frame *fp = (struct frame *)regs;
-	mm_segment_t old_fs = get_fs();
-	u16 c, *cp;
-	unsigned long addr;
-	int i;
-
-	print_modules();
-	printk("PC: [<%08lx>] %pS\n", regs->pc, (void *)regs->pc);
-	printk("SR: %04x  SP: %p  a2: %08lx\n", regs->sr, regs, regs->a2);
-	printk("d0: %08lx    d1: %08lx    d2: %08lx    d3: %08lx\n",
-	       regs->d0, regs->d1, regs->d2, regs->d3);
-	printk("d4: %08lx    d5: %08lx    a0: %08lx    a1: %08lx\n",
-	       regs->d4, regs->d5, regs->a0, regs->a1);
-
-	printk("Process %s (pid: %d, task=%p)\n",
-		current->comm, task_pid_nr(current), current);
-	addr = (unsigned long)&fp->un;
-	printk("Frame format=%X ", regs->format);
-	switch (regs->format) {
-	case 0x2:
-		printk("instr addr=%08lx\n", fp->un.fmt2.iaddr);
-		addr += sizeof(fp->un.fmt2);
-		break;
-	case 0x3:
-		printk("eff addr=%08lx\n", fp->un.fmt3.effaddr);
-		addr += sizeof(fp->un.fmt3);
-		break;
-	case 0x4:
-		printk((CPU_IS_060 ? "fault addr=%08lx fslw=%08lx\n"
-			: "eff addr=%08lx pc=%08lx\n"),
-			fp->un.fmt4.effaddr, fp->un.fmt4.pc);
-		addr += sizeof(fp->un.fmt4);
-		break;
-	case 0x7:
-		printk("eff addr=%08lx ssw=%04x faddr=%08lx\n",
-			fp->un.fmt7.effaddr, fp->un.fmt7.ssw, fp->un.fmt7.faddr);
-		printk("wb 1 stat/addr/data: %04x %08lx %08lx\n",
-			fp->un.fmt7.wb1s, fp->un.fmt7.wb1a, fp->un.fmt7.wb1dpd0);
-		printk("wb 2 stat/addr/data: %04x %08lx %08lx\n",
-			fp->un.fmt7.wb2s, fp->un.fmt7.wb2a, fp->un.fmt7.wb2d);
-		printk("wb 3 stat/addr/data: %04x %08lx %08lx\n",
-			fp->un.fmt7.wb3s, fp->un.fmt7.wb3a, fp->un.fmt7.wb3d);
-		printk("push data: %08lx %08lx %08lx %08lx\n",
-			fp->un.fmt7.wb1dpd0, fp->un.fmt7.pd1, fp->un.fmt7.pd2,
-			fp->un.fmt7.pd3);
-		addr += sizeof(fp->un.fmt7);
-		break;
-	case 0x9:
-		printk("instr addr=%08lx\n", fp->un.fmt9.iaddr);
-		addr += sizeof(fp->un.fmt9);
-		break;
-	case 0xa:
-		printk("ssw=%04x isc=%04x isb=%04x daddr=%08lx dobuf=%08lx\n",
-			fp->un.fmta.ssw, fp->un.fmta.isc, fp->un.fmta.isb,
-			fp->un.fmta.daddr, fp->un.fmta.dobuf);
-		addr += sizeof(fp->un.fmta);
-		break;
-	case 0xb:
-		printk("ssw=%04x isc=%04x isb=%04x daddr=%08lx dobuf=%08lx\n",
-			fp->un.fmtb.ssw, fp->un.fmtb.isc, fp->un.fmtb.isb,
-			fp->un.fmtb.daddr, fp->un.fmtb.dobuf);
-		printk("baddr=%08lx dibuf=%08lx ver=%x\n",
-			fp->un.fmtb.baddr, fp->un.fmtb.dibuf, fp->un.fmtb.ver);
-		addr += sizeof(fp->un.fmtb);
-		break;
-	default:
-		printk("\n");
-	}
-	show_stack(NULL, (unsigned long *)addr);
-
-	printk("Code:");
-	set_fs(KERNEL_DS);
-	cp = (u16 *)regs->pc;
-	for (i = -8; i < 16; i++) {
-		if (get_user(c, cp + i) && i >= 0) {
-			printk(" Bad PC value.");
-			break;
-		}
-		printk(i ? " %04x" : " <%04x>", c);
-	}
-	set_fs(old_fs);
-	printk ("\n");
-}
-
-void show_stack(struct task_struct *task, unsigned long *stack)
-{
-	unsigned long *p;
-	unsigned long *endstack;
-	int i;
-
-	if (!stack) {
-		if (task)
-			stack = (unsigned long *)task->thread.esp0;
-		else
-			stack = (unsigned long *)&stack;
-	}
-	endstack = (unsigned long *)(((unsigned long)stack + THREAD_SIZE - 1) & -THREAD_SIZE);
-
-	printk("Stack from %08lx:", (unsigned long)stack);
-	p = stack;
-	for (i = 0; i < kstack_depth_to_print; i++) {
-		if (p + 1 > endstack)
-			break;
-		if (i % 8 == 0)
-			printk("\n       ");
-		printk(" %08lx", *p++);
-	}
-	printk("\n");
-	show_trace(stack);
-}
-
-/*
- * The architecture-independent backtrace generator
- */
-void dump_stack(void)
-{
-	unsigned long stack;
-
-	show_trace(&stack);
-}
-
-EXPORT_SYMBOL(dump_stack);
-
-/*
- * The vector number returned in the frame pointer may also contain
- * the "fs" (Fault Status) bits on ColdFire. These are in the bottom
- * 2 bits, and upper 2 bits. So we need to mask out the real vector
- * number before using it in comparisons. You don't need to do this on
- * real 68k parts, but it won't hurt either.
- */
-
-void bad_super_trap (struct frame *fp)
-{
-	int vector = (fp->ptregs.vector >> 2) & 0xff;
-
-	console_verbose();
-	if (vector < ARRAY_SIZE(vec_names))
-		printk ("*** %s ***   FORMAT=%X\n",
-			vec_names[vector],
-			fp->ptregs.format);
-	else
-		printk ("*** Exception %d ***   FORMAT=%X\n",
-			vector, fp->ptregs.format);
-	if (vector == VEC_ADDRERR && CPU_IS_020_OR_030) {
-		unsigned short ssw = fp->un.fmtb.ssw;
-
-		printk ("SSW=%#06x  ", ssw);
-
-		if (ssw & RC)
-			printk ("Pipe stage C instruction fault at %#010lx\n",
-				(fp->ptregs.format) == 0xA ?
-				fp->ptregs.pc + 2 : fp->un.fmtb.baddr - 2);
-		if (ssw & RB)
-			printk ("Pipe stage B instruction fault at %#010lx\n",
-				(fp->ptregs.format) == 0xA ?
-				fp->ptregs.pc + 4 : fp->un.fmtb.baddr);
-		if (ssw & DF)
-			printk ("Data %s fault at %#010lx in %s (pc=%#lx)\n",
-				ssw & RW ? "read" : "write",
-				fp->un.fmtb.daddr, space_names[ssw & DFC],
-				fp->ptregs.pc);
-	}
-	printk ("Current process id is %d\n", task_pid_nr(current));
-	die_if_kernel("BAD KERNEL TRAP", &fp->ptregs, 0);
-}
-
-asmlinkage void trap_c(struct frame *fp)
-{
-	int sig;
-	int vector = (fp->ptregs.vector >> 2) & 0xff;
-	siginfo_t info;
-
-	if (fp->ptregs.sr & PS_S) {
-		if (vector == VEC_TRACE) {
-			/* traced a trapping instruction on a 68020/30,
-			 * real exception will be executed afterwards.
-			 */
-		} else if (!handle_kernel_fault(&fp->ptregs))
-			bad_super_trap(fp);
-		return;
-	}
-
-	/* send the appropriate signal to the user program */
-	switch (vector) {
-	    case VEC_ADDRERR:
-		info.si_code = BUS_ADRALN;
-		sig = SIGBUS;
-		break;
-	    case VEC_ILLEGAL:
-	    case VEC_LINE10:
-	    case VEC_LINE11:
-		info.si_code = ILL_ILLOPC;
-		sig = SIGILL;
-		break;
-	    case VEC_PRIV:
-		info.si_code = ILL_PRVOPC;
-		sig = SIGILL;
-		break;
-	    case VEC_COPROC:
-		info.si_code = ILL_COPROC;
-		sig = SIGILL;
-		break;
-	    case VEC_TRAP1:
-	    case VEC_TRAP2:
-	    case VEC_TRAP3:
-	    case VEC_TRAP4:
-	    case VEC_TRAP5:
-	    case VEC_TRAP6:
-	    case VEC_TRAP7:
-	    case VEC_TRAP8:
-	    case VEC_TRAP9:
-	    case VEC_TRAP10:
-	    case VEC_TRAP11:
-	    case VEC_TRAP12:
-	    case VEC_TRAP13:
-	    case VEC_TRAP14:
-		info.si_code = ILL_ILLTRP;
-		sig = SIGILL;
-		break;
-	    case VEC_FPBRUC:
-	    case VEC_FPOE:
-	    case VEC_FPNAN:
-		info.si_code = FPE_FLTINV;
-		sig = SIGFPE;
-		break;
-	    case VEC_FPIR:
-		info.si_code = FPE_FLTRES;
-		sig = SIGFPE;
-		break;
-	    case VEC_FPDIVZ:
-		info.si_code = FPE_FLTDIV;
-		sig = SIGFPE;
-		break;
-	    case VEC_FPUNDER:
-		info.si_code = FPE_FLTUND;
-		sig = SIGFPE;
-		break;
-	    case VEC_FPOVER:
-		info.si_code = FPE_FLTOVF;
-		sig = SIGFPE;
-		break;
-	    case VEC_ZERODIV:
-		info.si_code = FPE_INTDIV;
-		sig = SIGFPE;
-		break;
-	    case VEC_CHK:
-	    case VEC_TRAP:
-		info.si_code = FPE_INTOVF;
-		sig = SIGFPE;
-		break;
-	    case VEC_TRACE:		/* ptrace single step */
-		info.si_code = TRAP_TRACE;
-		sig = SIGTRAP;
-		break;
-	    case VEC_TRAP15:		/* breakpoint */
-		info.si_code = TRAP_BRKPT;
-		sig = SIGTRAP;
-		break;
-	    default:
-		info.si_code = ILL_ILLOPC;
-		sig = SIGILL;
-		break;
-	}
-	info.si_signo = sig;
-	info.si_errno = 0;
-	switch (fp->ptregs.format) {
-	    default:
-		info.si_addr = (void *) fp->ptregs.pc;
-		break;
-	    case 2:
-		info.si_addr = (void *) fp->un.fmt2.iaddr;
-		break;
-	    case 7:
-		info.si_addr = (void *) fp->un.fmt7.effaddr;
-		break;
-	    case 9:
-		info.si_addr = (void *) fp->un.fmt9.iaddr;
-		break;
-	    case 10:
-		info.si_addr = (void *) fp->un.fmta.daddr;
-		break;
-	    case 11:
-		info.si_addr = (void *) fp->un.fmtb.daddr;
-		break;
-	}
-	force_sig_info (sig, &info, current);
-}
-
-void die_if_kernel (char *str, struct pt_regs *fp, int nr)
-{
-	if (!(fp->sr & PS_S))
-		return;
-
-	console_verbose();
-	printk("%s: %08x\n",str,nr);
-	show_registers(fp);
-	add_taint(TAINT_DIE);
-	do_exit(SIGSEGV);
-}
-
-asmlinkage void set_esp0(unsigned long ssp)
-{
-	current->thread.esp0 = ssp;
-}
-
-/*
- * This function is called if an error occur while accessing
- * user-space from the fpsp040 code.
- */
-asmlinkage void fpsp040_die(void)
-{
-	do_exit(SIGSEGV);
-}
-
-#ifdef CONFIG_M68KFPU_EMU
-asmlinkage void fpemu_signal(int signal, int code, void *addr)
-{
-	siginfo_t info;
-
-	info.si_signo = signal;
-	info.si_errno = 0;
-	info.si_code = code;
-	info.si_addr = addr;
-	force_sig_info(signal, &info, current);
-}
-#endif
diff --git a/ANDROID_3.4.5/arch/m68k/kernel/vectors.c b/ANDROID_3.4.5/arch/m68k/kernel/vectors.c
deleted file mode 100644
index 322c977b..00000000
--- a/ANDROID_3.4.5/arch/m68k/kernel/vectors.c
+++ /dev/null
@@ -1,144 +0,0 @@
-/*
- *  vectors.c
- *
- *  Copyright (C) 1993, 1994 by Hamish Macdonald
- *
- *  68040 fixes by Michael Rausch
- *  68040 fixes by Martin Apel
- *  68040 fixes and writeback by Richard Zidlicky
- *  68060 fixes by Roman Hodek
- *  68060 fixes by Jesper Skov
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file COPYING in the main directory of this archive
- * for more details.
- */
-
-/*
- * Sets up all exception vectors
- */
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/linkage.h>
-#include <linux/init.h>
-#include <linux/kallsyms.h>
-
-#include <asm/setup.h>
-#include <asm/fpu.h>
-#include <asm/traps.h>
-
-/* assembler routines */
-asmlinkage void system_call(void);
-asmlinkage void buserr(void);
-asmlinkage void trap(void);
-asmlinkage void nmihandler(void);
-#ifdef CONFIG_M68KFPU_EMU
-asmlinkage void fpu_emu(void);
-#endif
-
-e_vector vectors[256];
-
-/* nmi handler for the Amiga */
-asm(".text\n"
-    __ALIGN_STR "\n"
-    "nmihandler: rte");
-
-/*
- * this must be called very early as the kernel might
- * use some instruction that are emulated on the 060
- * and so we're prepared for early probe attempts (e.g. nf_init).
- */
-void __init base_trap_init(void)
-{
-	if (MACH_IS_SUN3X) {
-		extern e_vector *sun3x_prom_vbr;
-
-		__asm__ volatile ("movec %%vbr, %0" : "=r" (sun3x_prom_vbr));
-	}
-
-	/* setup the exception vector table */
-	__asm__ volatile ("movec %0,%%vbr" : : "r" ((void*)vectors));
-
-	if (CPU_IS_060) {
-		/* set up ISP entry points */
-		asmlinkage void unimp_vec(void) asm ("_060_isp_unimp");
-
-		vectors[VEC_UNIMPII] = unimp_vec;
-	}
-
-	vectors[VEC_BUSERR] = buserr;
-	vectors[VEC_ILLEGAL] = trap;
-	vectors[VEC_SYS] = system_call;
-}
-
-void __init trap_init (void)
-{
-	int i;
-
-	for (i = VEC_SPUR; i <= VEC_INT7; i++)
-		vectors[i] = bad_inthandler;
-
-	for (i = 0; i < VEC_USER; i++)
-		if (!vectors[i])
-			vectors[i] = trap;
-
-	for (i = VEC_USER; i < 256; i++)
-		vectors[i] = bad_inthandler;
-
-#ifdef CONFIG_M68KFPU_EMU
-	if (FPU_IS_EMU)
-		vectors[VEC_LINE11] = fpu_emu;
-#endif
-
-	if (CPU_IS_040 && !FPU_IS_EMU) {
-		/* set up FPSP entry points */
-		asmlinkage void dz_vec(void) asm ("dz");
-		asmlinkage void inex_vec(void) asm ("inex");
-		asmlinkage void ovfl_vec(void) asm ("ovfl");
-		asmlinkage void unfl_vec(void) asm ("unfl");
-		asmlinkage void snan_vec(void) asm ("snan");
-		asmlinkage void operr_vec(void) asm ("operr");
-		asmlinkage void bsun_vec(void) asm ("bsun");
-		asmlinkage void fline_vec(void) asm ("fline");
-		asmlinkage void unsupp_vec(void) asm ("unsupp");
-
-		vectors[VEC_FPDIVZ] = dz_vec;
-		vectors[VEC_FPIR] = inex_vec;
-		vectors[VEC_FPOVER] = ovfl_vec;
-		vectors[VEC_FPUNDER] = unfl_vec;
-		vectors[VEC_FPNAN] = snan_vec;
-		vectors[VEC_FPOE] = operr_vec;
-		vectors[VEC_FPBRUC] = bsun_vec;
-		vectors[VEC_LINE11] = fline_vec;
-		vectors[VEC_FPUNSUP] = unsupp_vec;
-	}
-
-	if (CPU_IS_060 && !FPU_IS_EMU) {
-		/* set up IFPSP entry points */
-		asmlinkage void snan_vec6(void) asm ("_060_fpsp_snan");
-		asmlinkage void operr_vec6(void) asm ("_060_fpsp_operr");
-		asmlinkage void ovfl_vec6(void) asm ("_060_fpsp_ovfl");
-		asmlinkage void unfl_vec6(void) asm ("_060_fpsp_unfl");
-		asmlinkage void dz_vec6(void) asm ("_060_fpsp_dz");
-		asmlinkage void inex_vec6(void) asm ("_060_fpsp_inex");
-		asmlinkage void fline_vec6(void) asm ("_060_fpsp_fline");
-		asmlinkage void unsupp_vec6(void) asm ("_060_fpsp_unsupp");
-		asmlinkage void effadd_vec6(void) asm ("_060_fpsp_effadd");
-
-		vectors[VEC_FPNAN] = snan_vec6;
-		vectors[VEC_FPOE] = operr_vec6;
-		vectors[VEC_FPOVER] = ovfl_vec6;
-		vectors[VEC_FPUNDER] = unfl_vec6;
-		vectors[VEC_FPDIVZ] = dz_vec6;
-		vectors[VEC_FPIR] = inex_vec6;
-		vectors[VEC_LINE11] = fline_vec6;
-		vectors[VEC_FPUNSUP] = unsupp_vec6;
-		vectors[VEC_UNIMPEA] = effadd_vec6;
-	}
-
-        /* if running on an amiga, make the NMI interrupt do nothing */
-	if (MACH_IS_AMIGA) {
-		vectors[VEC_INT7] = nmihandler;
-	}
-}
-
diff --git a/ANDROID_3.4.5/arch/m68k/kernel/vmlinux-nommu.lds b/ANDROID_3.4.5/arch/m68k/kernel/vmlinux-nommu.lds
deleted file mode 100644
index 40e02d9c..00000000
--- a/ANDROID_3.4.5/arch/m68k/kernel/vmlinux-nommu.lds
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
- *	vmlinux.lds.S -- master linker script for m68knommu arch
- *
- *	(C) Copyright 2002-2012, Greg Ungerer <gerg@snapgear.com>
- *
- *	This linker script is equipped to build either ROM loaded or RAM
- *	run kernels.
- */
-
-#if defined(CONFIG_RAMKERNEL)
-#define	KTEXT_ADDR	CONFIG_KERNELBASE
-#endif
-#if defined(CONFIG_ROMKERNEL)
-#define	KTEXT_ADDR	CONFIG_ROMSTART
-#define	KDATA_ADDR	CONFIG_KERNELBASE
-#define	LOAD_OFFSET	KDATA_ADDR + (ADDR(.text) + SIZEOF(.text))
-#endif
-
-#include <asm/page.h>
-#include <asm/thread_info.h>
-#include <asm-generic/vmlinux.lds.h>
-
-OUTPUT_ARCH(m68k)
-ENTRY(_start)
-
-jiffies = jiffies_64 + 4;
-
-SECTIONS {
-
-#ifdef CONFIG_ROMVEC
-	. = CONFIG_ROMVEC;
-	.romvec : {
-		__rom_start = .;
-		_romvec = .;
-		*(.romvec)
-		*(.data..initvect)
-	}
-#endif
-
-	. = KTEXT_ADDR;
-
-	_text = .;
-	_stext = .;
-	.text : {
-		HEAD_TEXT
-		TEXT_TEXT
-		SCHED_TEXT
-		LOCK_TEXT
-		*(.fixup)
-		. = ALIGN(16);
-	}
-	_etext = .;
-
-#ifdef KDATA_ADDR
-	. = KDATA_ADDR;
-#endif
-
-	_sdata = .;
-	RO_DATA_SECTION(PAGE_SIZE)
-	RW_DATA_SECTION(16, PAGE_SIZE, THREAD_SIZE)
-	_edata = .;
-
-	EXCEPTION_TABLE(16)
-	NOTES
-
-	. = ALIGN(PAGE_SIZE);
-	__init_begin = .;
-	INIT_TEXT_SECTION(PAGE_SIZE)
-	INIT_DATA_SECTION(16)
-	PERCPU_SECTION(16)
-	.m68k_fixup : {
-		__start_fixup = .;
-		*(.m68k_fixup)
-		__stop_fixup = .;
-	}
-	.init.data : {
-		. = ALIGN(PAGE_SIZE);
-		__init_end = .;
-	}
-
-	_sbss = .;
-	BSS_SECTION(0, 0, 0)
-	_ebss = .;
-
-	_end = .;
-
-	STABS_DEBUG
-	.comment 0 : { *(.comment) }
-
-	/* Sections to be discarded */
-	DISCARDS
-}
-
diff --git a/ANDROID_3.4.5/arch/m68k/kernel/vmlinux-std.lds b/ANDROID_3.4.5/arch/m68k/kernel/vmlinux-std.lds
deleted file mode 100644
index 63407c83..00000000
--- a/ANDROID_3.4.5/arch/m68k/kernel/vmlinux-std.lds
+++ /dev/null
@@ -1,65 +0,0 @@
-/* ld script to make m68k Linux kernel */
-
-#include <asm-generic/vmlinux.lds.h>
-#include <asm/page.h>
-#include <asm/thread_info.h>
-
-OUTPUT_FORMAT("elf32-m68k", "elf32-m68k", "elf32-m68k")
-OUTPUT_ARCH(m68k)
-ENTRY(_start)
-jiffies = jiffies_64 + 4;
-SECTIONS
-{
-  . = 0x1000;
-  _text = .;			/* Text and read-only data */
-  .text : {
-	HEAD_TEXT
-	TEXT_TEXT
-	SCHED_TEXT
-	LOCK_TEXT
-	*(.fixup)
-	*(.gnu.warning)
-	} :text = 0x4e75
-
-  _etext = .;			/* End of text section */
-
-  EXCEPTION_TABLE(16)
-
-  _sdata = .;			/* Start of data section */
-
-  RODATA
-
-  RW_DATA_SECTION(16, PAGE_SIZE, THREAD_SIZE)
-
-  _sbss = .;
-  BSS_SECTION(0, 0, 0)
-  _ebss = .;
-
-  _edata = .;			/* End of data section */
-
-  /* will be freed after init */
-  . = ALIGN(PAGE_SIZE);		/* Init code and data */
-  __init_begin = .;
-  INIT_TEXT_SECTION(PAGE_SIZE) :data
-  INIT_DATA_SECTION(16)
-  .m68k_fixup : {
-	__start_fixup = .;
-	*(.m68k_fixup)
-	__stop_fixup = .;
-  }
-  NOTES
-  .init_end : {
-	/* This ALIGN be in a section so that _end is at the end of the
-	   load segment. */
-	. = ALIGN(PAGE_SIZE);
-	__init_end = .;
-  }
-
-  _end = . ;
-
-  STABS_DEBUG
-  .comment 0 : { *(.comment) }
-
-  /* Sections to be discarded */
-  DISCARDS
-}
diff --git a/ANDROID_3.4.5/arch/m68k/kernel/vmlinux-sun3.lds b/ANDROID_3.4.5/arch/m68k/kernel/vmlinux-sun3.lds
deleted file mode 100644
index ad0f46d6..00000000
--- a/ANDROID_3.4.5/arch/m68k/kernel/vmlinux-sun3.lds
+++ /dev/null
@@ -1,57 +0,0 @@
-/* ld script to make m68k Linux kernel */
-
-#include <asm-generic/vmlinux.lds.h>
-#include <asm/page.h>
-#include <asm/thread_info.h>
-
-OUTPUT_FORMAT("elf32-m68k", "elf32-m68k", "elf32-m68k")
-OUTPUT_ARCH(m68k)
-ENTRY(_start)
-jiffies = jiffies_64 + 4;
-SECTIONS
-{
-  . = 0xE002000;
-  _text = .;			/* Text and read-only data */
-  .text : {
-	HEAD_TEXT
-	TEXT_TEXT
-	SCHED_TEXT
-	LOCK_TEXT
-	*(.fixup)
-	*(.gnu.warning)
-	} :text = 0x4e75
-	RODATA
-
-  _etext = .;			/* End of text section */
-
-  EXCEPTION_TABLE(16) :data
-  _sdata = .;			/* Start of rw data section */
-  RW_DATA_SECTION(16, PAGE_SIZE, THREAD_SIZE) :data
-  /* End of data goes *here* so that freeing init code works properly. */
-  _edata = .;
-  NOTES
-
-  /* will be freed after init */
-  . = ALIGN(PAGE_SIZE);	/* Init code and data */
-__init_begin = .;
-	INIT_TEXT_SECTION(PAGE_SIZE)
-	INIT_DATA_SECTION(16)
-	.m68k_fixup : {
-		__start_fixup = .;
-		*(.m68k_fixup)
-		__stop_fixup = .;
-	}
-	. = ALIGN(PAGE_SIZE);
-	__init_end = .;
-
-  _sbss = .;
-  BSS_SECTION(0, 0, 0)
-  _ebss = .;
-
-  _end = . ;
-
-  STABS_DEBUG
-
-  /* Sections to be discarded */
-  DISCARDS
-}
diff --git a/ANDROID_3.4.5/arch/m68k/kernel/vmlinux.lds.S b/ANDROID_3.4.5/arch/m68k/kernel/vmlinux.lds.S
deleted file mode 100644
index 69ec7963..00000000
--- a/ANDROID_3.4.5/arch/m68k/kernel/vmlinux.lds.S
+++ /dev/null
@@ -1,14 +0,0 @@
-#if defined(CONFIG_MMU) && !defined(CONFIG_COLDFIRE)
-PHDRS
-{
-  text PT_LOAD FILEHDR PHDRS FLAGS (7);
-  data PT_LOAD FLAGS (7);
-}
-#ifdef CONFIG_SUN3
-#include "vmlinux-sun3.lds"
-#else
-#include "vmlinux-std.lds"
-#endif
-#else
-#include "vmlinux-nommu.lds"
-#endif
diff --git a/ANDROID_3.4.5/arch/m68k/lib/Makefile b/ANDROID_3.4.5/arch/m68k/lib/Makefile
deleted file mode 100644
index a9d782d3..00000000
--- a/ANDROID_3.4.5/arch/m68k/lib/Makefile
+++ /dev/null
@@ -1,16 +0,0 @@
-
-#
-# Makefile for m68k-specific library files..
-#
-
-lib-y	:= ashldi3.o ashrdi3.o lshrdi3.o muldi3.o \
-	   memcpy.o memset.o memmove.o
-
-lib-$(CONFIG_MMU) += string.o uaccess.o
-lib-$(CONFIG_CPU_HAS_NO_MULDIV64) += mulsi3.o divsi3.o udivsi3.o
-lib-$(CONFIG_CPU_HAS_NO_MULDIV64) += modsi3.o umodsi3.o
-
-ifndef CONFIG_GENERIC_CSUM
-lib-y	+= checksum.o
-endif
-
diff --git a/ANDROID_3.4.5/arch/m68k/lib/ashldi3.c b/ANDROID_3.4.5/arch/m68k/lib/ashldi3.c
deleted file mode 100644
index 7729f338..00000000
--- a/ANDROID_3.4.5/arch/m68k/lib/ashldi3.c
+++ /dev/null
@@ -1,62 +0,0 @@
-/* ashrdi3.c extracted from gcc-2.95.2/libgcc2.c which is: */
-/* Copyright (C) 1989, 92-98, 1999 Free Software Foundation, Inc.
-
-This file is part of GNU CC.
-
-GNU CC is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2, or (at your option)
-any later version.
-
-GNU CC is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with GNU CC; see the file COPYING.  If not, write to
-the Free Software Foundation, 59 Temple Place - Suite 330,
-Boston, MA 02111-1307, USA.  */
-
-#define BITS_PER_UNIT 8
-
-typedef		 int SItype	__attribute__ ((mode (SI)));
-typedef unsigned int USItype	__attribute__ ((mode (SI)));
-typedef		 int DItype	__attribute__ ((mode (DI)));
-typedef int word_type __attribute__ ((mode (__word__)));
-
-struct DIstruct {SItype high, low;};
-
-typedef union
-{
-  struct DIstruct s;
-  DItype ll;
-} DIunion;
-
-DItype
-__ashldi3 (DItype u, word_type b)
-{
-  DIunion w;
-  word_type bm;
-  DIunion uu;
-
-  if (b == 0)
-    return u;
-
-  uu.ll = u;
-
-  bm = (sizeof (SItype) * BITS_PER_UNIT) - b;
-  if (bm <= 0)
-    {
-      w.s.low = 0;
-      w.s.high = (USItype)uu.s.low << -bm;
-    }
-  else
-    {
-      USItype carries = (USItype)uu.s.low >> bm;
-      w.s.low = (USItype)uu.s.low << b;
-      w.s.high = ((USItype)uu.s.high << b) | carries;
-    }
-
-  return w.ll;
-}
diff --git a/ANDROID_3.4.5/arch/m68k/lib/ashrdi3.c b/ANDROID_3.4.5/arch/m68k/lib/ashrdi3.c
deleted file mode 100644
index 18ea5f7e..00000000
--- a/ANDROID_3.4.5/arch/m68k/lib/ashrdi3.c
+++ /dev/null
@@ -1,63 +0,0 @@
-/* ashrdi3.c extracted from gcc-2.7.2/libgcc2.c which is: */
-/* Copyright (C) 1989, 1992, 1993, 1994, 1995 Free Software Foundation, Inc.
-
-This file is part of GNU CC.
-
-GNU CC is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2, or (at your option)
-any later version.
-
-GNU CC is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with GNU CC; see the file COPYING.  If not, write to
-the Free Software Foundation, 59 Temple Place - Suite 330,
-Boston, MA 02111-1307, USA.  */
-
-#define BITS_PER_UNIT 8
-
-typedef		 int SItype	__attribute__ ((mode (SI)));
-typedef unsigned int USItype	__attribute__ ((mode (SI)));
-typedef		 int DItype	__attribute__ ((mode (DI)));
-typedef int word_type __attribute__ ((mode (__word__)));
-
-struct DIstruct {SItype high, low;};
-
-typedef union
-{
-  struct DIstruct s;
-  DItype ll;
-} DIunion;
-
-DItype
-__ashrdi3 (DItype u, word_type b)
-{
-  DIunion w;
-  word_type bm;
-  DIunion uu;
-
-  if (b == 0)
-    return u;
-
-  uu.ll = u;
-
-  bm = (sizeof (SItype) * BITS_PER_UNIT) - b;
-  if (bm <= 0)
-    {
-      /* w.s.high = 1..1 or 0..0 */
-      w.s.high = uu.s.high >> (sizeof (SItype) * BITS_PER_UNIT - 1);
-      w.s.low = uu.s.high >> -bm;
-    }
-  else
-    {
-      USItype carries = (USItype)uu.s.high << bm;
-      w.s.high = uu.s.high >> b;
-      w.s.low = ((USItype)uu.s.low >> b) | carries;
-    }
-
-  return w.ll;
-}
diff --git a/ANDROID_3.4.5/arch/m68k/lib/checksum.c b/ANDROID_3.4.5/arch/m68k/lib/checksum.c
deleted file mode 100644
index 6216f12a..00000000
--- a/ANDROID_3.4.5/arch/m68k/lib/checksum.c
+++ /dev/null
@@ -1,425 +0,0 @@
-/*
- * INET		An implementation of the TCP/IP protocol suite for the LINUX
- *		operating system.  INET is implemented using the  BSD Socket
- *		interface as the means of communication with the user level.
- *
- *		IP/TCP/UDP checksumming routines
- *
- * Authors:	Jorge Cwik, <jorge@laser.satlink.net>
- *		Arnt Gulbrandsen, <agulbra@nvg.unit.no>
- *		Tom May, <ftom@netcom.com>
- *		Andreas Schwab, <schwab@issan.informatik.uni-dortmund.de>
- *		Lots of code moved from tcp.c and ip.c; see those files
- *		for more names.
- *
- * 03/02/96	Jes Sorensen, Andreas Schwab, Roman Hodek:
- *		Fixed some nasty bugs, causing some horrible crashes.
- *		A: At some points, the sum (%0) was used as
- *		length-counter instead of the length counter
- *		(%1). Thanks to Roman Hodek for pointing this out.
- *		B: GCC seems to mess up if one uses too many
- *		data-registers to hold input values and one tries to
- *		specify d0 and d1 as scratch registers. Letting gcc
- *		choose these registers itself solves the problem.
- *
- *		This program is free software; you can redistribute it and/or
- *		modify it under the terms of the GNU General Public License
- *		as published by the Free Software Foundation; either version
- *		2 of the License, or (at your option) any later version.
- *
- * 1998/8/31	Andreas Schwab:
- *		Zero out rest of buffer on exception in
- *		csum_partial_copy_from_user.
- */
-
-#include <linux/module.h>
-#include <net/checksum.h>
-
-/*
- * computes a partial checksum, e.g. for TCP/UDP fragments
- */
-
-__wsum csum_partial(const void *buff, int len, __wsum sum)
-{
-	unsigned long tmp1, tmp2;
-	  /*
-	   * Experiments with ethernet and slip connections show that buff
-	   * is aligned on either a 2-byte or 4-byte boundary.
-	   */
-	__asm__("movel %2,%3\n\t"
-		"btst #1,%3\n\t"	/* Check alignment */
-		"jeq 2f\n\t"
-		"subql #2,%1\n\t"	/* buff%4==2: treat first word */
-		"jgt 1f\n\t"
-		"addql #2,%1\n\t"	/* len was == 2, treat only rest */
-		"jra 4f\n"
-	     "1:\t"
-		"addw %2@+,%0\n\t"	/* add first word to sum */
-		"clrl %3\n\t"
-		"addxl %3,%0\n"		/* add X bit */
-	     "2:\t"
-		/* unrolled loop for the main part: do 8 longs at once */
-		"movel %1,%3\n\t"	/* save len in tmp1 */
-		"lsrl #5,%1\n\t"	/* len/32 */
-		"jeq 2f\n\t"		/* not enough... */
-		"subql #1,%1\n"
-	     "1:\t"
-		"movel %2@+,%4\n\t"
-		"addxl %4,%0\n\t"
-		"movel %2@+,%4\n\t"
-		"addxl %4,%0\n\t"
-		"movel %2@+,%4\n\t"
-		"addxl %4,%0\n\t"
-		"movel %2@+,%4\n\t"
-		"addxl %4,%0\n\t"
-		"movel %2@+,%4\n\t"
-		"addxl %4,%0\n\t"
-		"movel %2@+,%4\n\t"
-		"addxl %4,%0\n\t"
-		"movel %2@+,%4\n\t"
-		"addxl %4,%0\n\t"
-		"movel %2@+,%4\n\t"
-		"addxl %4,%0\n\t"
-		"dbra %1,1b\n\t"
-		"clrl %4\n\t"
-		"addxl %4,%0\n\t"	/* add X bit */
-		"clrw %1\n\t"
-		"subql #1,%1\n\t"
-		"jcc 1b\n"
-	     "2:\t"
-		"movel %3,%1\n\t"	/* restore len from tmp1 */
-		"andw #0x1c,%3\n\t"	/* number of rest longs */
-		"jeq 4f\n\t"
-		"lsrw #2,%3\n\t"
-		"subqw #1,%3\n"
-	     "3:\t"
-		/* loop for rest longs */
-		"movel %2@+,%4\n\t"
-		"addxl %4,%0\n\t"
-		"dbra %3,3b\n\t"
-		"clrl %4\n\t"
-		"addxl %4,%0\n"		/* add X bit */
-	     "4:\t"
-		/* now check for rest bytes that do not fit into longs */
-		"andw #3,%1\n\t"
-		"jeq 7f\n\t"
-		"clrl %4\n\t"		/* clear tmp2 for rest bytes */
-		"subqw #2,%1\n\t"
-		"jlt 5f\n\t"
-		"movew %2@+,%4\n\t"	/* have rest >= 2: get word */
-		"swap %4\n\t"		/* into bits 16..31 */
-		"tstw %1\n\t"		/* another byte? */
-		"jeq 6f\n"
-	     "5:\t"
-		"moveb %2@,%4\n\t"	/* have odd rest: get byte */
-		"lslw #8,%4\n\t"	/* into bits 8..15; 16..31 untouched */
-	     "6:\t"
-		"addl %4,%0\n\t"	/* now add rest long to sum */
-		"clrl %4\n\t"
-		"addxl %4,%0\n"		/* add X bit */
-	     "7:\t"
-		: "=d" (sum), "=d" (len), "=a" (buff),
-		  "=&d" (tmp1), "=&d" (tmp2)
-		: "0" (sum), "1" (len), "2" (buff)
-	    );
-	return(sum);
-}
-
-EXPORT_SYMBOL(csum_partial);
-
-
-/*
- * copy from user space while checksumming, with exception handling.
- */
-
-__wsum
-csum_partial_copy_from_user(const void __user *src, void *dst,
-			    int len, __wsum sum, int *csum_err)
-{
-	/*
-	 * GCC doesn't like more than 10 operands for the asm
-	 * statements so we have to use tmp2 for the error
-	 * code.
-	 */
-	unsigned long tmp1, tmp2;
-
-	__asm__("movel %2,%4\n\t"
-		"btst #1,%4\n\t"	/* Check alignment */
-		"jeq 2f\n\t"
-		"subql #2,%1\n\t"	/* buff%4==2: treat first word */
-		"jgt 1f\n\t"
-		"addql #2,%1\n\t"	/* len was == 2, treat only rest */
-		"jra 4f\n"
-	     "1:\n"
-	     "10:\t"
-		"movesw %2@+,%4\n\t"	/* add first word to sum */
-		"addw %4,%0\n\t"
-		"movew %4,%3@+\n\t"
-		"clrl %4\n\t"
-		"addxl %4,%0\n"		/* add X bit */
-	     "2:\t"
-		/* unrolled loop for the main part: do 8 longs at once */
-		"movel %1,%4\n\t"	/* save len in tmp1 */
-		"lsrl #5,%1\n\t"	/* len/32 */
-		"jeq 2f\n\t"		/* not enough... */
-		"subql #1,%1\n"
-	     "1:\n"
-	     "11:\t"
-		"movesl %2@+,%5\n\t"
-		"addxl %5,%0\n\t"
-		"movel %5,%3@+\n\t"
-	     "12:\t"
-		"movesl %2@+,%5\n\t"
-		"addxl %5,%0\n\t"
-		"movel %5,%3@+\n\t"
-	     "13:\t"
-		"movesl %2@+,%5\n\t"
-		"addxl %5,%0\n\t"
-		"movel %5,%3@+\n\t"
-	     "14:\t"
-		"movesl %2@+,%5\n\t"
-		"addxl %5,%0\n\t"
-		"movel %5,%3@+\n\t"
-	     "15:\t"
-		"movesl %2@+,%5\n\t"
-		"addxl %5,%0\n\t"
-		"movel %5,%3@+\n\t"
-	     "16:\t"
-		"movesl %2@+,%5\n\t"
-		"addxl %5,%0\n\t"
-		"movel %5,%3@+\n\t"
-	     "17:\t"
-		"movesl %2@+,%5\n\t"
-		"addxl %5,%0\n\t"
-		"movel %5,%3@+\n\t"
-	     "18:\t"
-		"movesl %2@+,%5\n\t"
-		"addxl %5,%0\n\t"
-		"movel %5,%3@+\n\t"
-		"dbra %1,1b\n\t"
-		"clrl %5\n\t"
-		"addxl %5,%0\n\t"	/* add X bit */
-		"clrw %1\n\t"
-		"subql #1,%1\n\t"
-		"jcc 1b\n"
-	     "2:\t"
-		"movel %4,%1\n\t"	/* restore len from tmp1 */
-		"andw #0x1c,%4\n\t"	/* number of rest longs */
-		"jeq 4f\n\t"
-		"lsrw #2,%4\n\t"
-		"subqw #1,%4\n"
-	     "3:\n"
-		/* loop for rest longs */
-	     "19:\t"
-		"movesl %2@+,%5\n\t"
-		"addxl %5,%0\n\t"
-		"movel %5,%3@+\n\t"
-		"dbra %4,3b\n\t"
-		"clrl %5\n\t"
-		"addxl %5,%0\n"		/* add X bit */
-	     "4:\t"
-		/* now check for rest bytes that do not fit into longs */
-		"andw #3,%1\n\t"
-		"jeq 7f\n\t"
-		"clrl %5\n\t"		/* clear tmp2 for rest bytes */
-		"subqw #2,%1\n\t"
-		"jlt 5f\n\t"
-	     "20:\t"
-		"movesw %2@+,%5\n\t"	/* have rest >= 2: get word */
-		"movew %5,%3@+\n\t"
-		"swap %5\n\t"		/* into bits 16..31 */
-		"tstw %1\n\t"		/* another byte? */
-		"jeq 6f\n"
-	     "5:\n"
-	     "21:\t"
-		"movesb %2@,%5\n\t"	/* have odd rest: get byte */
-		"moveb %5,%3@+\n\t"
-		"lslw #8,%5\n\t"	/* into bits 8..15; 16..31 untouched */
-	     "6:\t"
-		"addl %5,%0\n\t"	/* now add rest long to sum */
-		"clrl %5\n\t"
-		"addxl %5,%0\n\t"	/* add X bit */
-	     "7:\t"
-		"clrl %5\n"		/* no error - clear return value */
-	     "8:\n"
-		".section .fixup,\"ax\"\n"
-		".even\n"
-		/* If any exception occurs zero out the rest.
-		   Similarities with the code above are intentional :-) */
-	     "90:\t"
-		"clrw %3@+\n\t"
-		"movel %1,%4\n\t"
-		"lsrl #5,%1\n\t"
-		"jeq 1f\n\t"
-		"subql #1,%1\n"
-	     "91:\t"
-		"clrl %3@+\n"
-	     "92:\t"
-		"clrl %3@+\n"
-	     "93:\t"
-		"clrl %3@+\n"
-	     "94:\t"
-		"clrl %3@+\n"
-	     "95:\t"
-		"clrl %3@+\n"
-	     "96:\t"
-		"clrl %3@+\n"
-	     "97:\t"
-		"clrl %3@+\n"
-	     "98:\t"
-		"clrl %3@+\n\t"
-		"dbra %1,91b\n\t"
-		"clrw %1\n\t"
-		"subql #1,%1\n\t"
-		"jcc 91b\n"
-	     "1:\t"
-		"movel %4,%1\n\t"
-		"andw #0x1c,%4\n\t"
-		"jeq 1f\n\t"
-		"lsrw #2,%4\n\t"
-		"subqw #1,%4\n"
-	     "99:\t"
-		"clrl %3@+\n\t"
-		"dbra %4,99b\n\t"
-	     "1:\t"
-		"andw #3,%1\n\t"
-		"jeq 9f\n"
-	     "100:\t"
-		"clrw %3@+\n\t"
-		"tstw %1\n\t"
-		"jeq 9f\n"
-	     "101:\t"
-		"clrb %3@+\n"
-	     "9:\t"
-#define STR(X) STR1(X)
-#define STR1(X) #X
-		"moveq #-" STR(EFAULT) ",%5\n\t"
-		"jra 8b\n"
-		".previous\n"
-		".section __ex_table,\"a\"\n"
-		".long 10b,90b\n"
-		".long 11b,91b\n"
-		".long 12b,92b\n"
-		".long 13b,93b\n"
-		".long 14b,94b\n"
-		".long 15b,95b\n"
-		".long 16b,96b\n"
-		".long 17b,97b\n"
-		".long 18b,98b\n"
-		".long 19b,99b\n"
-		".long 20b,100b\n"
-		".long 21b,101b\n"
-		".previous"
-		: "=d" (sum), "=d" (len), "=a" (src), "=a" (dst),
-		  "=&d" (tmp1), "=d" (tmp2)
-		: "0" (sum), "1" (len), "2" (src), "3" (dst)
-	    );
-
-	*csum_err = tmp2;
-
-	return(sum);
-}
-
-EXPORT_SYMBOL(csum_partial_copy_from_user);
-
-
-/*
- * copy from kernel space while checksumming, otherwise like csum_partial
- */
-
-__wsum
-csum_partial_copy_nocheck(const void *src, void *dst, int len, __wsum sum)
-{
-	unsigned long tmp1, tmp2;
-	__asm__("movel %2,%4\n\t"
-		"btst #1,%4\n\t"	/* Check alignment */
-		"jeq 2f\n\t"
-		"subql #2,%1\n\t"	/* buff%4==2: treat first word */
-		"jgt 1f\n\t"
-		"addql #2,%1\n\t"	/* len was == 2, treat only rest */
-		"jra 4f\n"
-	     "1:\t"
-		"movew %2@+,%4\n\t"	/* add first word to sum */
-		"addw %4,%0\n\t"
-		"movew %4,%3@+\n\t"
-		"clrl %4\n\t"
-		"addxl %4,%0\n"		/* add X bit */
-	     "2:\t"
-		/* unrolled loop for the main part: do 8 longs at once */
-		"movel %1,%4\n\t"	/* save len in tmp1 */
-		"lsrl #5,%1\n\t"	/* len/32 */
-		"jeq 2f\n\t"		/* not enough... */
-		"subql #1,%1\n"
-	     "1:\t"
-		"movel %2@+,%5\n\t"
-		"addxl %5,%0\n\t"
-		"movel %5,%3@+\n\t"
-		"movel %2@+,%5\n\t"
-		"addxl %5,%0\n\t"
-		"movel %5,%3@+\n\t"
-		"movel %2@+,%5\n\t"
-		"addxl %5,%0\n\t"
-		"movel %5,%3@+\n\t"
-		"movel %2@+,%5\n\t"
-		"addxl %5,%0\n\t"
-		"movel %5,%3@+\n\t"
-		"movel %2@+,%5\n\t"
-		"addxl %5,%0\n\t"
-		"movel %5,%3@+\n\t"
-		"movel %2@+,%5\n\t"
-		"addxl %5,%0\n\t"
-		"movel %5,%3@+\n\t"
-		"movel %2@+,%5\n\t"
-		"addxl %5,%0\n\t"
-		"movel %5,%3@+\n\t"
-		"movel %2@+,%5\n\t"
-		"addxl %5,%0\n\t"
-		"movel %5,%3@+\n\t"
-		"dbra %1,1b\n\t"
-		"clrl %5\n\t"
-		"addxl %5,%0\n\t"	/* add X bit */
-		"clrw %1\n\t"
-		"subql #1,%1\n\t"
-		"jcc 1b\n"
-	     "2:\t"
-		"movel %4,%1\n\t"	/* restore len from tmp1 */
-		"andw #0x1c,%4\n\t"	/* number of rest longs */
-		"jeq 4f\n\t"
-		"lsrw #2,%4\n\t"
-		"subqw #1,%4\n"
-	     "3:\t"
-		/* loop for rest longs */
-		"movel %2@+,%5\n\t"
-		"addxl %5,%0\n\t"
-		"movel %5,%3@+\n\t"
-		"dbra %4,3b\n\t"
-		"clrl %5\n\t"
-		"addxl %5,%0\n"		/* add X bit */
-	     "4:\t"
-		/* now check for rest bytes that do not fit into longs */
-		"andw #3,%1\n\t"
-		"jeq 7f\n\t"
-		"clrl %5\n\t"		/* clear tmp2 for rest bytes */
-		"subqw #2,%1\n\t"
-		"jlt 5f\n\t"
-		"movew %2@+,%5\n\t"	/* have rest >= 2: get word */
-		"movew %5,%3@+\n\t"
-		"swap %5\n\t"		/* into bits 16..31 */
-		"tstw %1\n\t"		/* another byte? */
-		"jeq 6f\n"
-	     "5:\t"
-		"moveb %2@,%5\n\t"	/* have odd rest: get byte */
-		"moveb %5,%3@+\n\t"
-		"lslw #8,%5\n"		/* into bits 8..15; 16..31 untouched */
-	     "6:\t"
-		"addl %5,%0\n\t"	/* now add rest long to sum */
-		"clrl %5\n\t"
-		"addxl %5,%0\n"		/* add X bit */
-	     "7:\t"
-		: "=d" (sum), "=d" (len), "=a" (src), "=a" (dst),
-		  "=&d" (tmp1), "=&d" (tmp2)
-		: "0" (sum), "1" (len), "2" (src), "3" (dst)
-	    );
-    return(sum);
-}
-EXPORT_SYMBOL(csum_partial_copy_nocheck);
diff --git a/ANDROID_3.4.5/arch/m68k/lib/divsi3.S b/ANDROID_3.4.5/arch/m68k/lib/divsi3.S
deleted file mode 100644
index ec307b61..00000000
--- a/ANDROID_3.4.5/arch/m68k/lib/divsi3.S
+++ /dev/null
@@ -1,125 +0,0 @@
-/* libgcc1 routines for 68000 w/o floating-point hardware.
-   Copyright (C) 1994, 1996, 1997, 1998 Free Software Foundation, Inc.
-
-This file is part of GNU CC.
-
-GNU CC is free software; you can redistribute it and/or modify it
-under the terms of the GNU General Public License as published by the
-Free Software Foundation; either version 2, or (at your option) any
-later version.
-
-In addition to the permissions in the GNU General Public License, the
-Free Software Foundation gives you unlimited permission to link the
-compiled version of this file with other programs, and to distribute
-those programs without any restriction coming from the use of this
-file.  (The General Public License restrictions do apply in other
-respects; for example, they cover modification of the file, and
-distribution when not linked into another program.)
-
-This file is distributed in the hope that it will be useful, but
-WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; see the file COPYING.  If not, write to
-the Free Software Foundation, 59 Temple Place - Suite 330,
-Boston, MA 02111-1307, USA.  */
-
-/* As a special exception, if you link this library with files
-   compiled with GCC to produce an executable, this does not cause
-   the resulting executable to be covered by the GNU General Public License.
-   This exception does not however invalidate any other reasons why
-   the executable file might be covered by the GNU General Public License.  */
-
-/* Use this one for any 680x0; assumes no floating point hardware.
-   The trailing " '" appearing on some lines is for ANSI preprocessors.  Yuk.
-   Some of this code comes from MINIX, via the folks at ericsson.
-   D. V. Henkel-Wallace (gumby@cygnus.com) Fete Bastille, 1992
-*/
-
-/* These are predefined by new versions of GNU cpp.  */
-
-#ifndef __USER_LABEL_PREFIX__
-#define __USER_LABEL_PREFIX__ _
-#endif
-
-#ifndef __REGISTER_PREFIX__
-#define __REGISTER_PREFIX__
-#endif
-
-#ifndef __IMMEDIATE_PREFIX__
-#define __IMMEDIATE_PREFIX__ #
-#endif
-
-/* ANSI concatenation macros.  */
-
-#define CONCAT1(a, b) CONCAT2(a, b)
-#define CONCAT2(a, b) a ## b
-
-/* Use the right prefix for global labels.  */
-
-#define SYM(x) CONCAT1 (__USER_LABEL_PREFIX__, x)
-
-/* Use the right prefix for registers.  */
-
-#define REG(x) CONCAT1 (__REGISTER_PREFIX__, x)
-
-/* Use the right prefix for immediate values.  */
-
-#define IMM(x) CONCAT1 (__IMMEDIATE_PREFIX__, x)
-
-#define d0 REG (d0)
-#define d1 REG (d1)
-#define d2 REG (d2)
-#define d3 REG (d3)
-#define d4 REG (d4)
-#define d5 REG (d5)
-#define d6 REG (d6)
-#define d7 REG (d7)
-#define a0 REG (a0)
-#define a1 REG (a1)
-#define a2 REG (a2)
-#define a3 REG (a3)
-#define a4 REG (a4)
-#define a5 REG (a5)
-#define a6 REG (a6)
-#define fp REG (fp)
-#define sp REG (sp)
-
-	.text
-	.proc
-	.globl	SYM (__divsi3)
-SYM (__divsi3):
-	movel	d2, sp@-
-
-	moveq	IMM (1), d2	/* sign of result stored in d2 (=1 or =-1) */
-	movel	sp@(12), d1	/* d1 = divisor */
-	jpl	L1
-	negl	d1
-#if !(defined(__mcf5200__) || defined(__mcoldfire__))
-	negb	d2		/* change sign because divisor <0  */
-#else
-	negl	d2		/* change sign because divisor <0  */
-#endif
-L1:	movel	sp@(8), d0	/* d0 = dividend */
-	jpl	L2
-	negl	d0
-#if !(defined(__mcf5200__) || defined(__mcoldfire__))
-	negb	d2
-#else
-	negl	d2
-#endif
-
-L2:	movel	d1, sp@-
-	movel	d0, sp@-
-	jbsr	SYM (__udivsi3)	/* divide abs(dividend) by abs(divisor) */
-	addql	IMM (8), sp
-
-	tstb	d2
-	jpl	L3
-	negl	d0
-
-L3:	movel	sp@+, d2
-	rts
-
diff --git a/ANDROID_3.4.5/arch/m68k/lib/lshrdi3.c b/ANDROID_3.4.5/arch/m68k/lib/lshrdi3.c
deleted file mode 100644
index d06442d3..00000000
--- a/ANDROID_3.4.5/arch/m68k/lib/lshrdi3.c
+++ /dev/null
@@ -1,62 +0,0 @@
-/* lshrdi3.c extracted from gcc-2.7.2/libgcc2.c which is: */
-/* Copyright (C) 1989, 1992, 1993, 1994, 1995 Free Software Foundation, Inc.
-
-This file is part of GNU CC.
-
-GNU CC is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2, or (at your option)
-any later version.
-
-GNU CC is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with GNU CC; see the file COPYING.  If not, write to
-the Free Software Foundation, 59 Temple Place - Suite 330,
-Boston, MA 02111-1307, USA.  */
-
-#define BITS_PER_UNIT 8
-
-typedef		 int SItype	__attribute__ ((mode (SI)));
-typedef unsigned int USItype	__attribute__ ((mode (SI)));
-typedef		 int DItype	__attribute__ ((mode (DI)));
-typedef int word_type __attribute__ ((mode (__word__)));
-
-struct DIstruct {SItype high, low;};
-
-typedef union
-{
-  struct DIstruct s;
-  DItype ll;
-} DIunion;
-
-DItype
-__lshrdi3 (DItype u, word_type b)
-{
-  DIunion w;
-  word_type bm;
-  DIunion uu;
-
-  if (b == 0)
-    return u;
-
-  uu.ll = u;
-
-  bm = (sizeof (SItype) * BITS_PER_UNIT) - b;
-  if (bm <= 0)
-    {
-      w.s.high = 0;
-      w.s.low = (USItype)uu.s.high >> -bm;
-    }
-  else
-    {
-      USItype carries = (USItype)uu.s.high << bm;
-      w.s.high = (USItype)uu.s.high >> b;
-      w.s.low = ((USItype)uu.s.low >> b) | carries;
-    }
-
-  return w.ll;
-}
diff --git a/ANDROID_3.4.5/arch/m68k/lib/memcpy.c b/ANDROID_3.4.5/arch/m68k/lib/memcpy.c
deleted file mode 100644
index 10ca051d..00000000
--- a/ANDROID_3.4.5/arch/m68k/lib/memcpy.c
+++ /dev/null
@@ -1,88 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file COPYING in the main directory of this archive
- * for more details.
- */
-
-#include <linux/module.h>
-#include <linux/string.h>
-
-void *memcpy(void *to, const void *from, size_t n)
-{
-	void *xto = to;
-	size_t temp, temp1;
-
-	if (!n)
-		return xto;
-	if ((long)to & 1) {
-		char *cto = to;
-		const char *cfrom = from;
-		*cto++ = *cfrom++;
-		to = cto;
-		from = cfrom;
-		n--;
-	}
-#if defined(CONFIG_M68000)
-	if ((long)from & 1) {
-		char *cto = to;
-		const char *cfrom = from;
-		for (; n; n--)
-			*cto++ = *cfrom++;
-		return xto;
-	}
-#endif
-	if (n > 2 && (long)to & 2) {
-		short *sto = to;
-		const short *sfrom = from;
-		*sto++ = *sfrom++;
-		to = sto;
-		from = sfrom;
-		n -= 2;
-	}
-	temp = n >> 2;
-	if (temp) {
-		long *lto = to;
-		const long *lfrom = from;
-#if defined(CONFIG_M68000) || defined(CONFIG_COLDFIRE)
-		for (; temp; temp--)
-			*lto++ = *lfrom++;
-#else
-		asm volatile (
-			"	movel %2,%3\n"
-			"	andw  #7,%3\n"
-			"	lsrl  #3,%2\n"
-			"	negw  %3\n"
-			"	jmp   %%pc@(1f,%3:w:2)\n"
-			"4:	movel %0@+,%1@+\n"
-			"	movel %0@+,%1@+\n"
-			"	movel %0@+,%1@+\n"
-			"	movel %0@+,%1@+\n"
-			"	movel %0@+,%1@+\n"
-			"	movel %0@+,%1@+\n"
-			"	movel %0@+,%1@+\n"
-			"	movel %0@+,%1@+\n"
-			"1:	dbra  %2,4b\n"
-			"	clrw  %2\n"
-			"	subql #1,%2\n"
-			"	jpl   4b"
-			: "=a" (lfrom), "=a" (lto), "=d" (temp), "=&d" (temp1)
-			: "0" (lfrom), "1" (lto), "2" (temp));
-#endif
-		to = lto;
-		from = lfrom;
-	}
-	if (n & 2) {
-		short *sto = to;
-		const short *sfrom = from;
-		*sto++ = *sfrom++;
-		to = sto;
-		from = sfrom;
-	}
-	if (n & 1) {
-		char *cto = to;
-		const char *cfrom = from;
-		*cto = *cfrom;
-	}
-	return xto;
-}
-EXPORT_SYMBOL(memcpy);
diff --git a/ANDROID_3.4.5/arch/m68k/lib/memmove.c b/ANDROID_3.4.5/arch/m68k/lib/memmove.c
deleted file mode 100644
index 6519f7f3..00000000
--- a/ANDROID_3.4.5/arch/m68k/lib/memmove.c
+++ /dev/null
@@ -1,103 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file COPYING in the main directory of this archive
- * for more details.
- */
-
-#include <linux/module.h>
-#include <linux/string.h>
-
-void *memmove(void *dest, const void *src, size_t n)
-{
-	void *xdest = dest;
-	size_t temp;
-
-	if (!n)
-		return xdest;
-
-	if (dest < src) {
-		if ((long)dest & 1) {
-			char *cdest = dest;
-			const char *csrc = src;
-			*cdest++ = *csrc++;
-			dest = cdest;
-			src = csrc;
-			n--;
-		}
-		if (n > 2 && (long)dest & 2) {
-			short *sdest = dest;
-			const short *ssrc = src;
-			*sdest++ = *ssrc++;
-			dest = sdest;
-			src = ssrc;
-			n -= 2;
-		}
-		temp = n >> 2;
-		if (temp) {
-			long *ldest = dest;
-			const long *lsrc = src;
-			temp--;
-			do
-				*ldest++ = *lsrc++;
-			while (temp--);
-			dest = ldest;
-			src = lsrc;
-		}
-		if (n & 2) {
-			short *sdest = dest;
-			const short *ssrc = src;
-			*sdest++ = *ssrc++;
-			dest = sdest;
-			src = ssrc;
-		}
-		if (n & 1) {
-			char *cdest = dest;
-			const char *csrc = src;
-			*cdest = *csrc;
-		}
-	} else {
-		dest = (char *)dest + n;
-		src = (const char *)src + n;
-		if ((long)dest & 1) {
-			char *cdest = dest;
-			const char *csrc = src;
-			*--cdest = *--csrc;
-			dest = cdest;
-			src = csrc;
-			n--;
-		}
-		if (n > 2 && (long)dest & 2) {
-			short *sdest = dest;
-			const short *ssrc = src;
-			*--sdest = *--ssrc;
-			dest = sdest;
-			src = ssrc;
-			n -= 2;
-		}
-		temp = n >> 2;
-		if (temp) {
-			long *ldest = dest;
-			const long *lsrc = src;
-			temp--;
-			do
-				*--ldest = *--lsrc;
-			while (temp--);
-			dest = ldest;
-			src = lsrc;
-		}
-		if (n & 2) {
-			short *sdest = dest;
-			const short *ssrc = src;
-			*--sdest = *--ssrc;
-			dest = sdest;
-			src = ssrc;
-		}
-		if (n & 1) {
-			char *cdest = dest;
-			const char *csrc = src;
-			*--cdest = *--csrc;
-		}
-	}
-	return xdest;
-}
-EXPORT_SYMBOL(memmove);
diff --git a/ANDROID_3.4.5/arch/m68k/lib/memset.c b/ANDROID_3.4.5/arch/m68k/lib/memset.c
deleted file mode 100644
index 8a7639f0..00000000
--- a/ANDROID_3.4.5/arch/m68k/lib/memset.c
+++ /dev/null
@@ -1,74 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file COPYING in the main directory of this archive
- * for more details.
- */
-
-#include <linux/module.h>
-#include <linux/string.h>
-
-void *memset(void *s, int c, size_t count)
-{
-	void *xs = s;
-	size_t temp;
-
-	if (!count)
-		return xs;
-	c &= 0xff;
-	c |= c << 8;
-	c |= c << 16;
-	if ((long)s & 1) {
-		char *cs = s;
-		*cs++ = c;
-		s = cs;
-		count--;
-	}
-	if (count > 2 && (long)s & 2) {
-		short *ss = s;
-		*ss++ = c;
-		s = ss;
-		count -= 2;
-	}
-	temp = count >> 2;
-	if (temp) {
-		long *ls = s;
-#if defined(CONFIG_M68000) || defined(CONFIG_COLDFIRE)
-		for (; temp; temp--)
-			*ls++ = c;
-#else
-		size_t temp1;
-		asm volatile (
-			"	movel %1,%2\n"
-			"	andw  #7,%2\n"
-			"	lsrl  #3,%1\n"
-			"	negw  %2\n"
-			"	jmp   %%pc@(2f,%2:w:2)\n"
-			"1:	movel %3,%0@+\n"
-			"	movel %3,%0@+\n"
-			"	movel %3,%0@+\n"
-			"	movel %3,%0@+\n"
-			"	movel %3,%0@+\n"
-			"	movel %3,%0@+\n"
-			"	movel %3,%0@+\n"
-			"	movel %3,%0@+\n"
-			"2:	dbra  %1,1b\n"
-			"	clrw  %1\n"
-			"	subql #1,%1\n"
-			"	jpl   1b"
-			: "=a" (ls), "=d" (temp), "=&d" (temp1)
-			: "d" (c), "0" (ls), "1" (temp));
-#endif
-		s = ls;
-	}
-	if (count & 2) {
-		short *ss = s;
-		*ss++ = c;
-		s = ss;
-	}
-	if (count & 1) {
-		char *cs = s;
-		*cs = c;
-	}
-	return xs;
-}
-EXPORT_SYMBOL(memset);
diff --git a/ANDROID_3.4.5/arch/m68k/lib/modsi3.S b/ANDROID_3.4.5/arch/m68k/lib/modsi3.S
deleted file mode 100644
index ef384943..00000000
--- a/ANDROID_3.4.5/arch/m68k/lib/modsi3.S
+++ /dev/null
@@ -1,113 +0,0 @@
-/* libgcc1 routines for 68000 w/o floating-point hardware.
-   Copyright (C) 1994, 1996, 1997, 1998 Free Software Foundation, Inc.
-
-This file is part of GNU CC.
-
-GNU CC is free software; you can redistribute it and/or modify it
-under the terms of the GNU General Public License as published by the
-Free Software Foundation; either version 2, or (at your option) any
-later version.
-
-In addition to the permissions in the GNU General Public License, the
-Free Software Foundation gives you unlimited permission to link the
-compiled version of this file with other programs, and to distribute
-those programs without any restriction coming from the use of this
-file.  (The General Public License restrictions do apply in other
-respects; for example, they cover modification of the file, and
-distribution when not linked into another program.)
-
-This file is distributed in the hope that it will be useful, but
-WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; see the file COPYING.  If not, write to
-the Free Software Foundation, 59 Temple Place - Suite 330,
-Boston, MA 02111-1307, USA.  */
-
-/* As a special exception, if you link this library with files
-   compiled with GCC to produce an executable, this does not cause
-   the resulting executable to be covered by the GNU General Public License.
-   This exception does not however invalidate any other reasons why
-   the executable file might be covered by the GNU General Public License.  */
-
-/* Use this one for any 680x0; assumes no floating point hardware.
-   The trailing " '" appearing on some lines is for ANSI preprocessors.  Yuk.
-   Some of this code comes from MINIX, via the folks at ericsson.
-   D. V. Henkel-Wallace (gumby@cygnus.com) Fete Bastille, 1992
-*/
-
-/* These are predefined by new versions of GNU cpp.  */
-
-#ifndef __USER_LABEL_PREFIX__
-#define __USER_LABEL_PREFIX__ _
-#endif
-
-#ifndef __REGISTER_PREFIX__
-#define __REGISTER_PREFIX__
-#endif
-
-#ifndef __IMMEDIATE_PREFIX__
-#define __IMMEDIATE_PREFIX__ #
-#endif
-
-/* ANSI concatenation macros.  */
-
-#define CONCAT1(a, b) CONCAT2(a, b)
-#define CONCAT2(a, b) a ## b
-
-/* Use the right prefix for global labels.  */
-
-#define SYM(x) CONCAT1 (__USER_LABEL_PREFIX__, x)
-
-/* Use the right prefix for registers.  */
-
-#define REG(x) CONCAT1 (__REGISTER_PREFIX__, x)
-
-/* Use the right prefix for immediate values.  */
-
-#define IMM(x) CONCAT1 (__IMMEDIATE_PREFIX__, x)
-
-#define d0 REG (d0)
-#define d1 REG (d1)
-#define d2 REG (d2)
-#define d3 REG (d3)
-#define d4 REG (d4)
-#define d5 REG (d5)
-#define d6 REG (d6)
-#define d7 REG (d7)
-#define a0 REG (a0)
-#define a1 REG (a1)
-#define a2 REG (a2)
-#define a3 REG (a3)
-#define a4 REG (a4)
-#define a5 REG (a5)
-#define a6 REG (a6)
-#define fp REG (fp)
-#define sp REG (sp)
-
-	.text
-	.proc
-	.globl	SYM (__modsi3)
-SYM (__modsi3):
-	movel	sp@(8), d1	/* d1 = divisor */
-	movel	sp@(4), d0	/* d0 = dividend */
-	movel	d1, sp@-
-	movel	d0, sp@-
-	jbsr	SYM (__divsi3)
-	addql	IMM (8), sp
-	movel	sp@(8), d1	/* d1 = divisor */
-#if !(defined(__mcf5200__) || defined(__mcoldfire__))
-	movel	d1, sp@-
-	movel	d0, sp@-
-	jbsr	SYM (__mulsi3)	/* d0 = (a/b)*b */
-	addql	IMM (8), sp
-#else
-	mulsl	d1,d0
-#endif
-	movel	sp@(4), d1	/* d1 = dividend */
-	subl	d0, d1		/* d1 = a - (a/b)*b */
-	movel	d1, d0
-	rts
-
diff --git a/ANDROID_3.4.5/arch/m68k/lib/muldi3.c b/ANDROID_3.4.5/arch/m68k/lib/muldi3.c
deleted file mode 100644
index 79e928a5..00000000
--- a/ANDROID_3.4.5/arch/m68k/lib/muldi3.c
+++ /dev/null
@@ -1,97 +0,0 @@
-/* muldi3.c extracted from gcc-2.7.2.3/libgcc2.c and 
-			   gcc-2.7.2.3/longlong.h which is: */
-/* Copyright (C) 1989, 1992, 1993, 1994, 1995 Free Software Foundation, Inc.
-
-This file is part of GNU CC.
-
-GNU CC is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2, or (at your option)
-any later version.
-
-GNU CC is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with GNU CC; see the file COPYING.  If not, write to
-the Free Software Foundation, 59 Temple Place - Suite 330,
-Boston, MA 02111-1307, USA.  */
-
-#if defined(CONFIG_M68000) || defined(CONFIG_COLDFIRE)
-
-#define SI_TYPE_SIZE 32
-#define __BITS4 (SI_TYPE_SIZE / 4)
-#define __ll_B (1L << (SI_TYPE_SIZE / 2))
-#define __ll_lowpart(t) ((USItype) (t) % __ll_B)
-#define __ll_highpart(t) ((USItype) (t) / __ll_B)
-
-#define umul_ppmm(w1, w0, u, v)						\
-  do {									\
-    USItype __x0, __x1, __x2, __x3;					\
-    USItype __ul, __vl, __uh, __vh;					\
-									\
-    __ul = __ll_lowpart (u);						\
-    __uh = __ll_highpart (u);						\
-    __vl = __ll_lowpart (v);						\
-    __vh = __ll_highpart (v);						\
-									\
-    __x0 = (USItype) __ul * __vl;					\
-    __x1 = (USItype) __ul * __vh;					\
-    __x2 = (USItype) __uh * __vl;					\
-    __x3 = (USItype) __uh * __vh;					\
-									\
-    __x1 += __ll_highpart (__x0);/* this can't give carry */		\
-    __x1 += __x2;		/* but this indeed can */		\
-    if (__x1 < __x2)		/* did we get it? */			\
-      __x3 += __ll_B;		/* yes, add it in the proper pos. */	\
-									\
-    (w1) = __x3 + __ll_highpart (__x1);					\
-    (w0) = __ll_lowpart (__x1) * __ll_B + __ll_lowpart (__x0);		\
-  } while (0)
-
-#else
-
-#define umul_ppmm(w1, w0, u, v) \
-  __asm__ ("mulu%.l %3,%1:%0"						\
-           : "=d" ((USItype)(w0)),					\
-             "=d" ((USItype)(w1))					\
-           : "%0" ((USItype)(u)),					\
-             "dmi" ((USItype)(v)))
-
-#endif
-
-#define __umulsidi3(u, v) \
-  ({DIunion __w;							\
-    umul_ppmm (__w.s.high, __w.s.low, u, v);				\
-    __w.ll; })
-
-typedef 	 int SItype	__attribute__ ((mode (SI)));
-typedef unsigned int USItype	__attribute__ ((mode (SI)));
-typedef		 int DItype	__attribute__ ((mode (DI)));
-typedef int word_type __attribute__ ((mode (__word__)));
-
-struct DIstruct {SItype high, low;};
-
-typedef union
-{
-  struct DIstruct s;
-  DItype ll;
-} DIunion;
-
-DItype
-__muldi3 (DItype u, DItype v)
-{
-  DIunion w;
-  DIunion uu, vv;
-
-  uu.ll = u,
-  vv.ll = v;
-
-  w.ll = __umulsidi3 (uu.s.low, vv.s.low);
-  w.s.high += ((USItype) uu.s.low * (USItype) vv.s.high
-	       + (USItype) uu.s.high * (USItype) vv.s.low);
-
-  return w.ll;
-}
diff --git a/ANDROID_3.4.5/arch/m68k/lib/mulsi3.S b/ANDROID_3.4.5/arch/m68k/lib/mulsi3.S
deleted file mode 100644
index ce29ea37..00000000
--- a/ANDROID_3.4.5/arch/m68k/lib/mulsi3.S
+++ /dev/null
@@ -1,110 +0,0 @@
-/* libgcc1 routines for 68000 w/o floating-point hardware.
-   Copyright (C) 1994, 1996, 1997, 1998 Free Software Foundation, Inc.
-
-This file is part of GNU CC.
-
-GNU CC is free software; you can redistribute it and/or modify it
-under the terms of the GNU General Public License as published by the
-Free Software Foundation; either version 2, or (at your option) any
-later version.
-
-In addition to the permissions in the GNU General Public License, the
-Free Software Foundation gives you unlimited permission to link the
-compiled version of this file with other programs, and to distribute
-those programs without any restriction coming from the use of this
-file.  (The General Public License restrictions do apply in other
-respects; for example, they cover modification of the file, and
-distribution when not linked into another program.)
-
-This file is distributed in the hope that it will be useful, but
-WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; see the file COPYING.  If not, write to
-the Free Software Foundation, 59 Temple Place - Suite 330,
-Boston, MA 02111-1307, USA.  */
-
-/* As a special exception, if you link this library with files
-   compiled with GCC to produce an executable, this does not cause
-   the resulting executable to be covered by the GNU General Public License.
-   This exception does not however invalidate any other reasons why
-   the executable file might be covered by the GNU General Public License.  */
-
-/* Use this one for any 680x0; assumes no floating point hardware.
-   The trailing " '" appearing on some lines is for ANSI preprocessors.  Yuk.
-   Some of this code comes from MINIX, via the folks at ericsson.
-   D. V. Henkel-Wallace (gumby@cygnus.com) Fete Bastille, 1992
-*/
-
-/* These are predefined by new versions of GNU cpp.  */
-
-#ifndef __USER_LABEL_PREFIX__
-#define __USER_LABEL_PREFIX__ _
-#endif
-
-#ifndef __REGISTER_PREFIX__
-#define __REGISTER_PREFIX__
-#endif
-
-#ifndef __IMMEDIATE_PREFIX__
-#define __IMMEDIATE_PREFIX__ #
-#endif
-
-/* ANSI concatenation macros.  */
-
-#define CONCAT1(a, b) CONCAT2(a, b)
-#define CONCAT2(a, b) a ## b
-
-/* Use the right prefix for global labels.  */
-
-#define SYM(x) CONCAT1 (__USER_LABEL_PREFIX__, x)
-
-/* Use the right prefix for registers.  */
-
-#define REG(x) CONCAT1 (__REGISTER_PREFIX__, x)
-
-/* Use the right prefix for immediate values.  */
-
-#define IMM(x) CONCAT1 (__IMMEDIATE_PREFIX__, x)
-
-#define d0 REG (d0)
-#define d1 REG (d1)
-#define d2 REG (d2)
-#define d3 REG (d3)
-#define d4 REG (d4)
-#define d5 REG (d5)
-#define d6 REG (d6)
-#define d7 REG (d7)
-#define a0 REG (a0)
-#define a1 REG (a1)
-#define a2 REG (a2)
-#define a3 REG (a3)
-#define a4 REG (a4)
-#define a5 REG (a5)
-#define a6 REG (a6)
-#define fp REG (fp)
-#define sp REG (sp)
-
-	.text
-	.proc
-	.globl	SYM (__mulsi3)
-SYM (__mulsi3):
-	movew	sp@(4), d0	/* x0 -> d0 */
-	muluw	sp@(10), d0	/* x0*y1 */
-	movew	sp@(6), d1	/* x1 -> d1 */
-	muluw	sp@(8), d1	/* x1*y0 */
-#if !(defined(__mcf5200__) || defined(__mcoldfire__))
-	addw	d1, d0
-#else
-	addl	d1, d0
-#endif
-	swap	d0
-	clrw	d0
-	movew	sp@(6), d1	/* x1 -> d1 */
-	muluw	sp@(10), d1	/* x1*y1 */
-	addl	d1, d0
-
-	rts
-
diff --git a/ANDROID_3.4.5/arch/m68k/lib/string.c b/ANDROID_3.4.5/arch/m68k/lib/string.c
deleted file mode 100644
index b9a57abf..00000000
--- a/ANDROID_3.4.5/arch/m68k/lib/string.c
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file COPYING in the main directory of this archive
- * for more details.
- */
-
-#define __IN_STRING_C
-
-#include <linux/module.h>
-#include <linux/string.h>
-
-char *strcpy(char *dest, const char *src)
-{
-	return __kernel_strcpy(dest, src);
-}
-EXPORT_SYMBOL(strcpy);
-
-char *strcat(char *dest, const char *src)
-{
-	return __kernel_strcpy(dest + __kernel_strlen(dest), src);
-}
-EXPORT_SYMBOL(strcat);
diff --git a/ANDROID_3.4.5/arch/m68k/lib/uaccess.c b/ANDROID_3.4.5/arch/m68k/lib/uaccess.c
deleted file mode 100644
index 56643863..00000000
--- a/ANDROID_3.4.5/arch/m68k/lib/uaccess.c
+++ /dev/null
@@ -1,222 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file COPYING in the main directory of this archive
- * for more details.
- */
-
-#include <linux/module.h>
-#include <asm/uaccess.h>
-
-unsigned long __generic_copy_from_user(void *to, const void __user *from,
-				       unsigned long n)
-{
-	unsigned long tmp, res;
-
-	asm volatile ("\n"
-		"	tst.l	%0\n"
-		"	jeq	2f\n"
-		"1:	"MOVES".l	(%1)+,%3\n"
-		"	move.l	%3,(%2)+\n"
-		"	subq.l	#1,%0\n"
-		"	jne	1b\n"
-		"2:	btst	#1,%5\n"
-		"	jeq	4f\n"
-		"3:	"MOVES".w	(%1)+,%3\n"
-		"	move.w	%3,(%2)+\n"
-		"4:	btst	#0,%5\n"
-		"	jeq	6f\n"
-		"5:	"MOVES".b	(%1)+,%3\n"
-		"	move.b  %3,(%2)+\n"
-		"6:\n"
-		"	.section .fixup,\"ax\"\n"
-		"	.even\n"
-		"10:	move.l	%0,%3\n"
-		"7:	clr.l	(%2)+\n"
-		"	subq.l	#1,%3\n"
-		"	jne	7b\n"
-		"	lsl.l	#2,%0\n"
-		"	btst	#1,%5\n"
-		"	jeq	8f\n"
-		"30:	clr.w	(%2)+\n"
-		"	addq.l	#2,%0\n"
-		"8:	btst	#0,%5\n"
-		"	jeq	6b\n"
-		"50:	clr.b	(%2)+\n"
-		"	addq.l	#1,%0\n"
-		"	jra	6b\n"
-		"	.previous\n"
-		"\n"
-		"	.section __ex_table,\"a\"\n"
-		"	.align	4\n"
-		"	.long	1b,10b\n"
-		"	.long	3b,30b\n"
-		"	.long	5b,50b\n"
-		"	.previous"
-		: "=d" (res), "+a" (from), "+a" (to), "=&r" (tmp)
-		: "0" (n / 4), "d" (n & 3));
-
-	return res;
-}
-EXPORT_SYMBOL(__generic_copy_from_user);
-
-unsigned long __generic_copy_to_user(void __user *to, const void *from,
-				     unsigned long n)
-{
-	unsigned long tmp, res;
-
-	asm volatile ("\n"
-		"	tst.l	%0\n"
-		"	jeq	4f\n"
-		"1:	move.l	(%1)+,%3\n"
-		"2:	"MOVES".l	%3,(%2)+\n"
-		"3:	subq.l	#1,%0\n"
-		"	jne	1b\n"
-		"4:	btst	#1,%5\n"
-		"	jeq	6f\n"
-		"	move.w	(%1)+,%3\n"
-		"5:	"MOVES".w	%3,(%2)+\n"
-		"6:	btst	#0,%5\n"
-		"	jeq	8f\n"
-		"	move.b	(%1)+,%3\n"
-		"7:	"MOVES".b  %3,(%2)+\n"
-		"8:\n"
-		"	.section .fixup,\"ax\"\n"
-		"	.even\n"
-		"20:	lsl.l	#2,%0\n"
-		"50:	add.l	%5,%0\n"
-		"	jra	8b\n"
-		"	.previous\n"
-		"\n"
-		"	.section __ex_table,\"a\"\n"
-		"	.align	4\n"
-		"	.long	2b,20b\n"
-		"	.long	3b,20b\n"
-		"	.long	5b,50b\n"
-		"	.long	6b,50b\n"
-		"	.long	7b,50b\n"
-		"	.long	8b,50b\n"
-		"	.previous"
-		: "=d" (res), "+a" (from), "+a" (to), "=&r" (tmp)
-		: "0" (n / 4), "d" (n & 3));
-
-	return res;
-}
-EXPORT_SYMBOL(__generic_copy_to_user);
-
-/*
- * Copy a null terminated string from userspace.
- */
-long strncpy_from_user(char *dst, const char __user *src, long count)
-{
-	long res;
-	char c;
-
-	if (count <= 0)
-		return count;
-
-	asm volatile ("\n"
-		"1:	"MOVES".b	(%2)+,%4\n"
-		"	move.b	%4,(%1)+\n"
-		"	jeq	2f\n"
-		"	subq.l	#1,%3\n"
-		"	jne	1b\n"
-		"2:	sub.l	%3,%0\n"
-		"3:\n"
-		"	.section .fixup,\"ax\"\n"
-		"	.even\n"
-		"10:	move.l	%5,%0\n"
-		"	jra	3b\n"
-		"	.previous\n"
-		"\n"
-		"	.section __ex_table,\"a\"\n"
-		"	.align	4\n"
-		"	.long	1b,10b\n"
-		"	.previous"
-		: "=d" (res), "+a" (dst), "+a" (src), "+r" (count), "=&d" (c)
-		: "i" (-EFAULT), "0" (count));
-
-	return res;
-}
-EXPORT_SYMBOL(strncpy_from_user);
-
-/*
- * Return the size of a string (including the ending 0)
- *
- * Return 0 on exception, a value greater than N if too long
- */
-long strnlen_user(const char __user *src, long n)
-{
-	char c;
-	long res;
-
-	asm volatile ("\n"
-		"1:	subq.l	#1,%1\n"
-		"	jmi	3f\n"
-		"2:	"MOVES".b	(%0)+,%2\n"
-		"	tst.b	%2\n"
-		"	jne	1b\n"
-		"	jra	4f\n"
-		"\n"
-		"3:	addq.l	#1,%0\n"
-		"4:	sub.l	%4,%0\n"
-		"5:\n"
-		"	.section .fixup,\"ax\"\n"
-		"	.even\n"
-		"20:	sub.l	%0,%0\n"
-		"	jra	5b\n"
-		"	.previous\n"
-		"\n"
-		"	.section __ex_table,\"a\"\n"
-		"	.align	4\n"
-		"	.long	2b,20b\n"
-		"	.previous\n"
-		: "=&a" (res), "+d" (n), "=&d" (c)
-		: "0" (src), "r" (src));
-
-	return res;
-}
-EXPORT_SYMBOL(strnlen_user);
-
-/*
- * Zero Userspace
- */
-
-unsigned long __clear_user(void __user *to, unsigned long n)
-{
-	unsigned long res;
-
-	asm volatile ("\n"
-		"	tst.l	%0\n"
-		"	jeq	3f\n"
-		"1:	"MOVES".l	%2,(%1)+\n"
-		"2:	subq.l	#1,%0\n"
-		"	jne	1b\n"
-		"3:	btst	#1,%4\n"
-		"	jeq	5f\n"
-		"4:	"MOVES".w	%2,(%1)+\n"
-		"5:	btst	#0,%4\n"
-		"	jeq	7f\n"
-		"6:	"MOVES".b	%2,(%1)\n"
-		"7:\n"
-		"	.section .fixup,\"ax\"\n"
-		"	.even\n"
-		"10:	lsl.l	#2,%0\n"
-		"40:	add.l	%4,%0\n"
-		"	jra	7b\n"
-		"	.previous\n"
-		"\n"
-		"	.section __ex_table,\"a\"\n"
-		"	.align	4\n"
-		"	.long	1b,10b\n"
-		"	.long	2b,10b\n"
-		"	.long	4b,40b\n"
-		"	.long	5b,40b\n"
-		"	.long	6b,40b\n"
-		"	.long	7b,40b\n"
-		"	.previous"
-		: "=d" (res), "+a" (to)
-		: "r" (0), "0" (n / 4), "d" (n & 3));
-
-    return res;
-}
-EXPORT_SYMBOL(__clear_user);
diff --git a/ANDROID_3.4.5/arch/m68k/lib/udivsi3.S b/ANDROID_3.4.5/arch/m68k/lib/udivsi3.S
deleted file mode 100644
index c424c4a1..00000000
--- a/ANDROID_3.4.5/arch/m68k/lib/udivsi3.S
+++ /dev/null
@@ -1,162 +0,0 @@
-/* libgcc1 routines for 68000 w/o floating-point hardware.
-   Copyright (C) 1994, 1996, 1997, 1998 Free Software Foundation, Inc.
-
-This file is part of GNU CC.
-
-GNU CC is free software; you can redistribute it and/or modify it
-under the terms of the GNU General Public License as published by the
-Free Software Foundation; either version 2, or (at your option) any
-later version.
-
-In addition to the permissions in the GNU General Public License, the
-Free Software Foundation gives you unlimited permission to link the
-compiled version of this file with other programs, and to distribute
-those programs without any restriction coming from the use of this
-file.  (The General Public License restrictions do apply in other
-respects; for example, they cover modification of the file, and
-distribution when not linked into another program.)
-
-This file is distributed in the hope that it will be useful, but
-WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; see the file COPYING.  If not, write to
-the Free Software Foundation, 59 Temple Place - Suite 330,
-Boston, MA 02111-1307, USA.  */
-
-/* As a special exception, if you link this library with files
-   compiled with GCC to produce an executable, this does not cause
-   the resulting executable to be covered by the GNU General Public License.
-   This exception does not however invalidate any other reasons why
-   the executable file might be covered by the GNU General Public License.  */
-
-/* Use this one for any 680x0; assumes no floating point hardware.
-   The trailing " '" appearing on some lines is for ANSI preprocessors.  Yuk.
-   Some of this code comes from MINIX, via the folks at ericsson.
-   D. V. Henkel-Wallace (gumby@cygnus.com) Fete Bastille, 1992
-*/
-
-/* These are predefined by new versions of GNU cpp.  */
-
-#ifndef __USER_LABEL_PREFIX__
-#define __USER_LABEL_PREFIX__ _
-#endif
-
-#ifndef __REGISTER_PREFIX__
-#define __REGISTER_PREFIX__
-#endif
-
-#ifndef __IMMEDIATE_PREFIX__
-#define __IMMEDIATE_PREFIX__ #
-#endif
-
-/* ANSI concatenation macros.  */
-
-#define CONCAT1(a, b) CONCAT2(a, b)
-#define CONCAT2(a, b) a ## b
-
-/* Use the right prefix for global labels.  */
-
-#define SYM(x) CONCAT1 (__USER_LABEL_PREFIX__, x)
-
-/* Use the right prefix for registers.  */
-
-#define REG(x) CONCAT1 (__REGISTER_PREFIX__, x)
-
-/* Use the right prefix for immediate values.  */
-
-#define IMM(x) CONCAT1 (__IMMEDIATE_PREFIX__, x)
-
-#define d0 REG (d0)
-#define d1 REG (d1)
-#define d2 REG (d2)
-#define d3 REG (d3)
-#define d4 REG (d4)
-#define d5 REG (d5)
-#define d6 REG (d6)
-#define d7 REG (d7)
-#define a0 REG (a0)
-#define a1 REG (a1)
-#define a2 REG (a2)
-#define a3 REG (a3)
-#define a4 REG (a4)
-#define a5 REG (a5)
-#define a6 REG (a6)
-#define fp REG (fp)
-#define sp REG (sp)
-
-	.text
-	.proc
-	.globl	SYM (__udivsi3)
-SYM (__udivsi3):
-#if !(defined(__mcf5200__) || defined(__mcoldfire__))
-	movel	d2, sp@-
-	movel	sp@(12), d1	/* d1 = divisor */
-	movel	sp@(8), d0	/* d0 = dividend */
-
-	cmpl	IMM (0x10000), d1 /* divisor >= 2 ^ 16 ?   */
-	jcc	L3		/* then try next algorithm */
-	movel	d0, d2
-	clrw	d2
-	swap	d2
-	divu	d1, d2          /* high quotient in lower word */
-	movew	d2, d0		/* save high quotient */
-	swap	d0
-	movew	sp@(10), d2	/* get low dividend + high rest */
-	divu	d1, d2		/* low quotient */
-	movew	d2, d0
-	jra	L6
-
-L3:	movel	d1, d2		/* use d2 as divisor backup */
-L4:	lsrl	IMM (1), d1	/* shift divisor */
-	lsrl	IMM (1), d0	/* shift dividend */
-	cmpl	IMM (0x10000), d1 /* still divisor >= 2 ^ 16 ?  */
-	jcc	L4
-	divu	d1, d0		/* now we have 16 bit divisor */
-	andl	IMM (0xffff), d0 /* mask out divisor, ignore remainder */
-
-/* Multiply the 16 bit tentative quotient with the 32 bit divisor.  Because of
-   the operand ranges, this might give a 33 bit product.  If this product is
-   greater than the dividend, the tentative quotient was too large. */
-	movel	d2, d1
-	mulu	d0, d1		/* low part, 32 bits */
-	swap	d2
-	mulu	d0, d2		/* high part, at most 17 bits */
-	swap	d2		/* align high part with low part */
-	tstw	d2		/* high part 17 bits? */
-	jne	L5		/* if 17 bits, quotient was too large */
-	addl	d2, d1		/* add parts */
-	jcs	L5		/* if sum is 33 bits, quotient was too large */
-	cmpl	sp@(8), d1	/* compare the sum with the dividend */
-	jls	L6		/* if sum > dividend, quotient was too large */
-L5:	subql	IMM (1), d0	/* adjust quotient */
-
-L6:	movel	sp@+, d2
-	rts
-
-#else /* __mcf5200__ || __mcoldfire__ */
-
-/* Coldfire implementation of non-restoring division algorithm from
-   Hennessy & Patterson, Appendix A. */
-	link	a6,IMM (-12)
-	moveml	d2-d4,sp@
-	movel	a6@(8),d0
-	movel	a6@(12),d1
-	clrl	d2		| clear p
-	moveq	IMM (31),d4
-L1:	addl	d0,d0		| shift reg pair (p,a) one bit left
-	addxl	d2,d2
-	movl	d2,d3		| subtract b from p, store in tmp.
-	subl	d1,d3
-	jcs	L2		| if no carry,
-	bset	IMM (0),d0	| set the low order bit of a to 1,
-	movl	d3,d2		| and store tmp in p.
-L2:	subql	IMM (1),d4
-	jcc	L1
-	moveml	sp@,d2-d4	| restore data registers
-	unlk	a6		| and return
-	rts
-#endif /* __mcf5200__ || __mcoldfire__ */
-
diff --git a/ANDROID_3.4.5/arch/m68k/lib/umodsi3.S b/ANDROID_3.4.5/arch/m68k/lib/umodsi3.S
deleted file mode 100644
index 5def5f62..00000000
--- a/ANDROID_3.4.5/arch/m68k/lib/umodsi3.S
+++ /dev/null
@@ -1,113 +0,0 @@
-/* libgcc1 routines for 68000 w/o floating-point hardware.
-   Copyright (C) 1994, 1996, 1997, 1998 Free Software Foundation, Inc.
-
-This file is part of GNU CC.
-
-GNU CC is free software; you can redistribute it and/or modify it
-under the terms of the GNU General Public License as published by the
-Free Software Foundation; either version 2, or (at your option) any
-later version.
-
-In addition to the permissions in the GNU General Public License, the
-Free Software Foundation gives you unlimited permission to link the
-compiled version of this file with other programs, and to distribute
-those programs without any restriction coming from the use of this
-file.  (The General Public License restrictions do apply in other
-respects; for example, they cover modification of the file, and
-distribution when not linked into another program.)
-
-This file is distributed in the hope that it will be useful, but
-WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; see the file COPYING.  If not, write to
-the Free Software Foundation, 59 Temple Place - Suite 330,
-Boston, MA 02111-1307, USA.  */
-
-/* As a special exception, if you link this library with files
-   compiled with GCC to produce an executable, this does not cause
-   the resulting executable to be covered by the GNU General Public License.
-   This exception does not however invalidate any other reasons why
-   the executable file might be covered by the GNU General Public License.  */
-
-/* Use this one for any 680x0; assumes no floating point hardware.
-   The trailing " '" appearing on some lines is for ANSI preprocessors.  Yuk.
-   Some of this code comes from MINIX, via the folks at ericsson.
-   D. V. Henkel-Wallace (gumby@cygnus.com) Fete Bastille, 1992
-*/
-
-/* These are predefined by new versions of GNU cpp.  */
-
-#ifndef __USER_LABEL_PREFIX__
-#define __USER_LABEL_PREFIX__ _
-#endif
-
-#ifndef __REGISTER_PREFIX__
-#define __REGISTER_PREFIX__
-#endif
-
-#ifndef __IMMEDIATE_PREFIX__
-#define __IMMEDIATE_PREFIX__ #
-#endif
-
-/* ANSI concatenation macros.  */
-
-#define CONCAT1(a, b) CONCAT2(a, b)
-#define CONCAT2(a, b) a ## b
-
-/* Use the right prefix for global labels.  */
-
-#define SYM(x) CONCAT1 (__USER_LABEL_PREFIX__, x)
-
-/* Use the right prefix for registers.  */
-
-#define REG(x) CONCAT1 (__REGISTER_PREFIX__, x)
-
-/* Use the right prefix for immediate values.  */
-
-#define IMM(x) CONCAT1 (__IMMEDIATE_PREFIX__, x)
-
-#define d0 REG (d0)
-#define d1 REG (d1)
-#define d2 REG (d2)
-#define d3 REG (d3)
-#define d4 REG (d4)
-#define d5 REG (d5)
-#define d6 REG (d6)
-#define d7 REG (d7)
-#define a0 REG (a0)
-#define a1 REG (a1)
-#define a2 REG (a2)
-#define a3 REG (a3)
-#define a4 REG (a4)
-#define a5 REG (a5)
-#define a6 REG (a6)
-#define fp REG (fp)
-#define sp REG (sp)
-
-	.text
-	.proc
-	.globl	SYM (__umodsi3)
-SYM (__umodsi3):
-	movel	sp@(8), d1	/* d1 = divisor */
-	movel	sp@(4), d0	/* d0 = dividend */
-	movel	d1, sp@-
-	movel	d0, sp@-
-	jbsr	SYM (__udivsi3)
-	addql	IMM (8), sp
-	movel	sp@(8), d1	/* d1 = divisor */
-#if !(defined(__mcf5200__) || defined(__mcoldfire__))
-	movel	d1, sp@-
-	movel	d0, sp@-
-	jbsr	SYM (__mulsi3)	/* d0 = (a/b)*b */
-	addql	IMM (8), sp
-#else
-	mulsl	d1,d0
-#endif
-	movel	sp@(4), d1	/* d1 = dividend */
-	subl	d0, d1		/* d1 = a - (a/b)*b */
-	movel	d1, d0
-	rts
-
diff --git a/ANDROID_3.4.5/arch/m68k/mac/Makefile b/ANDROID_3.4.5/arch/m68k/mac/Makefile
deleted file mode 100644
index b8d4c835..00000000
--- a/ANDROID_3.4.5/arch/m68k/mac/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-#
-# Makefile for Linux arch/m68k/mac source directory
-#
-
-obj-y		:= config.o macints.o iop.o via.o oss.o psc.o \
-			baboon.o macboing.o misc.o
diff --git a/ANDROID_3.4.5/arch/m68k/mac/baboon.c b/ANDROID_3.4.5/arch/m68k/mac/baboon.c
deleted file mode 100644
index 3fe0e43d..00000000
--- a/ANDROID_3.4.5/arch/m68k/mac/baboon.c
+++ /dev/null
@@ -1,114 +0,0 @@
-/*
- * Baboon Custom IC Management
- *
- * The Baboon custom IC controls the IDE, PCMCIA and media bay on the
- * PowerBook 190. It multiplexes multiple interrupt sources onto the
- * Nubus slot $C interrupt.
- */
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/irq.h>
-
-#include <asm/macintosh.h>
-#include <asm/macints.h>
-#include <asm/mac_baboon.h>
-
-/* #define DEBUG_IRQS */
-
-int baboon_present;
-static volatile struct baboon *baboon;
-
-#if 0
-extern int macide_ack_intr(struct ata_channel *);
-#endif
-
-/*
- * Baboon initialization.
- */
-
-void __init baboon_init(void)
-{
-	if (macintosh_config->ident != MAC_MODEL_PB190) {
-		baboon = NULL;
-		baboon_present = 0;
-		return;
-	}
-
-	baboon = (struct baboon *) BABOON_BASE;
-	baboon_present = 1;
-
-	printk("Baboon detected at %p\n", baboon);
-}
-
-/*
- * Baboon interrupt handler. This works a lot like a VIA.
- */
-
-static void baboon_irq(unsigned int irq, struct irq_desc *desc)
-{
-	int irq_bit, irq_num;
-	unsigned char events;
-
-#ifdef DEBUG_IRQS
-	printk("baboon_irq: mb_control %02X mb_ifr %02X mb_status %02X\n",
-		(uint) baboon->mb_control, (uint) baboon->mb_ifr,
-		(uint) baboon->mb_status);
-#endif
-
-	events = baboon->mb_ifr & 0x07;
-	if (!events)
-		return;
-
-	irq_num = IRQ_BABOON_0;
-	irq_bit = 1;
-	do {
-	        if (events & irq_bit) {
-			baboon->mb_ifr &= ~irq_bit;
-			generic_handle_irq(irq_num);
-		}
-		irq_bit <<= 1;
-		irq_num++;
-	} while(events >= irq_bit);
-#if 0
-	if (baboon->mb_ifr & 0x02) macide_ack_intr(NULL);
-	/* for now we need to smash all interrupts */
-	baboon->mb_ifr &= ~events;
-#endif
-}
-
-/*
- * Register the Baboon interrupt dispatcher on nubus slot $C.
- */
-
-void __init baboon_register_interrupts(void)
-{
-	irq_set_chained_handler(IRQ_NUBUS_C, baboon_irq);
-}
-
-/*
- * The means for masking individual Baboon interrupts remains a mystery.
- * However, since we only use the IDE IRQ, we can just enable/disable all
- * Baboon interrupts. If/when we handle more than one Baboon IRQ, we must
- * either figure out how to mask them individually or else implement the
- * same workaround that's used for NuBus slots (see nubus_disabled and
- * via_nubus_irq_shutdown).
- */
-
-void baboon_irq_enable(int irq)
-{
-#ifdef DEBUG_IRQUSE
-	printk("baboon_irq_enable(%d)\n", irq);
-#endif
-
-	mac_irq_enable(irq_get_irq_data(IRQ_NUBUS_C));
-}
-
-void baboon_irq_disable(int irq)
-{
-#ifdef DEBUG_IRQUSE
-	printk("baboon_irq_disable(%d)\n", irq);
-#endif
-
-	mac_irq_disable(irq_get_irq_data(IRQ_NUBUS_C));
-}
diff --git a/ANDROID_3.4.5/arch/m68k/mac/config.c b/ANDROID_3.4.5/arch/m68k/mac/config.c
deleted file mode 100644
index d9f62e0f..00000000
--- a/ANDROID_3.4.5/arch/m68k/mac/config.c
+++ /dev/null
@@ -1,1048 +0,0 @@
-/*
- *  linux/arch/m68k/mac/config.c
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file COPYING in the main directory of this archive
- * for more details.
- */
-
-/*
- * Miscellaneous linux stuff
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/mm.h>
-#include <linux/tty.h>
-#include <linux/console.h>
-#include <linux/interrupt.h>
-/* keyb */
-#include <linux/random.h>
-#include <linux/delay.h>
-/* keyb */
-#include <linux/init.h>
-#include <linux/vt_kern.h>
-#include <linux/platform_device.h>
-#include <linux/adb.h>
-#include <linux/cuda.h>
-
-#define BOOTINFO_COMPAT_1_0
-#include <asm/setup.h>
-#include <asm/bootinfo.h>
-
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/pgtable.h>
-#include <asm/rtc.h>
-#include <asm/machdep.h>
-
-#include <asm/macintosh.h>
-#include <asm/macints.h>
-#include <asm/machw.h>
-
-#include <asm/mac_iop.h>
-#include <asm/mac_via.h>
-#include <asm/mac_oss.h>
-#include <asm/mac_psc.h>
-
-/* Mac bootinfo struct */
-struct mac_booter_data mac_bi_data;
-
-/* The phys. video addr. - might be bogus on some machines */
-static unsigned long mac_orig_videoaddr;
-
-/* Mac specific timer functions */
-extern unsigned long mac_gettimeoffset(void);
-extern int mac_hwclk(int, struct rtc_time *);
-extern int mac_set_clock_mmss(unsigned long);
-extern void iop_preinit(void);
-extern void iop_init(void);
-extern void via_init(void);
-extern void via_init_clock(irq_handler_t func);
-extern void via_flush_cache(void);
-extern void oss_init(void);
-extern void psc_init(void);
-extern void baboon_init(void);
-
-extern void mac_mksound(unsigned int, unsigned int);
-
-static void mac_get_model(char *str);
-static void mac_identify(void);
-static void mac_report_hardware(void);
-
-#ifdef CONFIG_EARLY_PRINTK
-asmlinkage void __init mac_early_print(const char *s, unsigned n);
-
-static void __init mac_early_cons_write(struct console *con,
-                                 const char *s, unsigned n)
-{
-	mac_early_print(s, n);
-}
-
-static struct console __initdata mac_early_cons = {
-	.name  = "early",
-	.write = mac_early_cons_write,
-	.flags = CON_PRINTBUFFER | CON_BOOT,
-	.index = -1
-};
-
-int __init mac_unregister_early_cons(void)
-{
-	/* mac_early_print can't be used after init sections are discarded */
-	return unregister_console(&mac_early_cons);
-}
-
-late_initcall(mac_unregister_early_cons);
-#endif
-
-static void __init mac_sched_init(irq_handler_t vector)
-{
-	via_init_clock(vector);
-}
-
-/*
- * Parse a Macintosh-specific record in the bootinfo
- */
-
-int __init mac_parse_bootinfo(const struct bi_record *record)
-{
-	int unknown = 0;
-	const u_long *data = record->data;
-
-	switch (record->tag) {
-	case BI_MAC_MODEL:
-		mac_bi_data.id = *data;
-		break;
-	case BI_MAC_VADDR:
-		mac_bi_data.videoaddr = *data;
-		break;
-	case BI_MAC_VDEPTH:
-		mac_bi_data.videodepth = *data;
-		break;
-	case BI_MAC_VROW:
-		mac_bi_data.videorow = *data;
-		break;
-	case BI_MAC_VDIM:
-		mac_bi_data.dimensions = *data;
-		break;
-	case BI_MAC_VLOGICAL:
-		mac_bi_data.videological = VIDEOMEMBASE + (*data & ~VIDEOMEMMASK);
-		mac_orig_videoaddr = *data;
-		break;
-	case BI_MAC_SCCBASE:
-		mac_bi_data.sccbase = *data;
-		break;
-	case BI_MAC_BTIME:
-		mac_bi_data.boottime = *data;
-		break;
-	case BI_MAC_GMTBIAS:
-		mac_bi_data.gmtbias = *data;
-		break;
-	case BI_MAC_MEMSIZE:
-		mac_bi_data.memsize = *data;
-		break;
-	case BI_MAC_CPUID:
-		mac_bi_data.cpuid = *data;
-		break;
-	case BI_MAC_ROMBASE:
-		mac_bi_data.rombase = *data;
-		break;
-	default:
-		unknown = 1;
-		break;
-	}
-	return unknown;
-}
-
-/*
- * Flip into 24bit mode for an instant - flushes the L2 cache card. We
- * have to disable interrupts for this. Our IRQ handlers will crap
- * themselves if they take an IRQ in 24bit mode!
- */
-
-static void mac_cache_card_flush(int writeback)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-	via_flush_cache();
-	local_irq_restore(flags);
-}
-
-void __init config_mac(void)
-{
-	if (!MACH_IS_MAC)
-		printk(KERN_ERR "ERROR: no Mac, but config_mac() called!!\n");
-
-	mach_sched_init = mac_sched_init;
-	mach_init_IRQ = mac_init_IRQ;
-	mach_get_model = mac_get_model;
-	mach_gettimeoffset = mac_gettimeoffset;
-	mach_hwclk = mac_hwclk;
-	mach_set_clock_mmss = mac_set_clock_mmss;
-	mach_reset = mac_reset;
-	mach_halt = mac_poweroff;
-	mach_power_off = mac_poweroff;
-	mach_max_dma_address = 0xffffffff;
-#if defined(CONFIG_INPUT_M68K_BEEP) || defined(CONFIG_INPUT_M68K_BEEP_MODULE)
-	mach_beep = mac_mksound;
-#endif
-
-#ifdef CONFIG_EARLY_PRINTK
-	register_console(&mac_early_cons);
-#endif
-
-	/*
-	 * Determine hardware present
-	 */
-
-	mac_identify();
-	mac_report_hardware();
-
-	/*
-	 * AFAIK only the IIci takes a cache card.  The IIfx has onboard
-	 * cache ... someone needs to figure out how to tell if it's on or
-	 * not.
-	 */
-
-	if (macintosh_config->ident == MAC_MODEL_IICI
-	    || macintosh_config->ident == MAC_MODEL_IIFX)
-		mach_l2_flush = mac_cache_card_flush;
-}
-
-
-/*
- * Macintosh Table: hardcoded model configuration data.
- *
- * Much of this was defined by Alan, based on who knows what docs.
- * I've added a lot more, and some of that was pure guesswork based
- * on hardware pages present on the Mac web site. Possibly wildly
- * inaccurate, so look here if a new Mac model won't run. Example: if
- * a Mac crashes immediately after the VIA1 registers have been dumped
- * to the screen, it probably died attempting to read DirB on a RBV.
- * Meaning it should have MAC_VIA_IICI here :-)
- */
-
-struct mac_model *macintosh_config;
-EXPORT_SYMBOL(macintosh_config);
-
-static struct mac_model mac_data_table[] = {
-	/*
-	 * We'll pretend to be a Macintosh II, that's pretty safe.
-	 */
-
-	{
-		.ident		= MAC_MODEL_II,
-		.name		= "Unknown",
-		.adb_type	= MAC_ADB_II,
-		.via_type	= MAC_VIA_II,
-		.scsi_type	= MAC_SCSI_OLD,
-		.scc_type	= MAC_SCC_II,
-		.nubus_type	= MAC_NUBUS,
-		.floppy_type	= MAC_FLOPPY_IWM,
-	},
-
-	/*
-	 * Original Mac II hardware
-	 */
-
-	{
-		.ident		= MAC_MODEL_II,
-		.name		= "II",
-		.adb_type	= MAC_ADB_II,
-		.via_type	= MAC_VIA_II,
-		.scsi_type	= MAC_SCSI_OLD,
-		.scc_type	= MAC_SCC_II,
-		.nubus_type	= MAC_NUBUS,
-		.floppy_type	= MAC_FLOPPY_IWM,
-	}, {
-		.ident		= MAC_MODEL_IIX,
-		.name		= "IIx",
-		.adb_type	= MAC_ADB_II,
-		.via_type	= MAC_VIA_II,
-		.scsi_type	= MAC_SCSI_OLD,
-		.scc_type	= MAC_SCC_II,
-		.nubus_type	= MAC_NUBUS,
-		.floppy_type	= MAC_FLOPPY_SWIM_ADDR2,
-	}, {
-		.ident		= MAC_MODEL_IICX,
-		.name		= "IIcx",
-		.adb_type	= MAC_ADB_II,
-		.via_type	= MAC_VIA_II,
-		.scsi_type	= MAC_SCSI_OLD,
-		.scc_type	= MAC_SCC_II,
-		.nubus_type	= MAC_NUBUS,
-		.floppy_type	= MAC_FLOPPY_SWIM_ADDR2,
-	}, {
-		.ident		= MAC_MODEL_SE30,
-		.name		= "SE/30",
-		.adb_type	= MAC_ADB_II,
-		.via_type	= MAC_VIA_II,
-		.scsi_type	= MAC_SCSI_OLD,
-		.scc_type	= MAC_SCC_II,
-		.nubus_type	= MAC_NUBUS,
-		.floppy_type	= MAC_FLOPPY_SWIM_ADDR2,
-	},
-
-	/*
-	 * Weirdified Mac II hardware - all subtly different. Gee thanks
-	 * Apple. All these boxes seem to have VIA2 in a different place to
-	 * the Mac II (+1A000 rather than +4000)
-	 * CSA: see http://developer.apple.com/technotes/hw/hw_09.html
-	 */
-
-	{
-		.ident		= MAC_MODEL_IICI,
-		.name		= "IIci",
-		.adb_type	= MAC_ADB_II,
-		.via_type	= MAC_VIA_IICI,
-		.scsi_type	= MAC_SCSI_OLD,
-		.scc_type	= MAC_SCC_II,
-		.nubus_type	= MAC_NUBUS,
-		.floppy_type	= MAC_FLOPPY_SWIM_ADDR2,
-	}, {
-		.ident		= MAC_MODEL_IIFX,
-		.name		= "IIfx",
-		.adb_type	= MAC_ADB_IOP,
-		.via_type	= MAC_VIA_IICI,
-		.scsi_type	= MAC_SCSI_OLD,
-		.scc_type	= MAC_SCC_IOP,
-		.nubus_type	= MAC_NUBUS,
-		.floppy_type	= MAC_FLOPPY_SWIM_IOP,
-	}, {
-		.ident		= MAC_MODEL_IISI,
-		.name		= "IIsi",
-		.adb_type	= MAC_ADB_IISI,
-		.via_type	= MAC_VIA_IICI,
-		.scsi_type	= MAC_SCSI_OLD,
-		.scc_type	= MAC_SCC_II,
-		.nubus_type	= MAC_NUBUS,
-		.floppy_type	= MAC_FLOPPY_SWIM_ADDR2,
-	}, {
-		.ident		= MAC_MODEL_IIVI,
-		.name		= "IIvi",
-		.adb_type	= MAC_ADB_IISI,
-		.via_type	= MAC_VIA_IICI,
-		.scsi_type	= MAC_SCSI_OLD,
-		.scc_type	= MAC_SCC_II,
-		.nubus_type	= MAC_NUBUS,
-		.floppy_type	= MAC_FLOPPY_SWIM_ADDR2,
-	}, {
-		.ident		= MAC_MODEL_IIVX,
-		.name		= "IIvx",
-		.adb_type	= MAC_ADB_IISI,
-		.via_type	= MAC_VIA_IICI,
-		.scsi_type	= MAC_SCSI_OLD,
-		.scc_type	= MAC_SCC_II,
-		.nubus_type	= MAC_NUBUS,
-		.floppy_type	= MAC_FLOPPY_SWIM_ADDR2,
-	},
-
-	/*
-	 * Classic models (guessing: similar to SE/30? Nope, similar to LC...)
-	 */
-
-	{
-		.ident		= MAC_MODEL_CLII,
-		.name		= "Classic II",
-		.adb_type	= MAC_ADB_IISI,
-		.via_type	= MAC_VIA_IICI,
-		.scsi_type	= MAC_SCSI_OLD,
-		.scc_type	= MAC_SCC_II,
-		.nubus_type	= MAC_NUBUS,
-		.floppy_type	= MAC_FLOPPY_SWIM_ADDR2,
-	}, {
-		.ident		= MAC_MODEL_CCL,
-		.name		= "Color Classic",
-		.adb_type	= MAC_ADB_CUDA,
-		.via_type	= MAC_VIA_IICI,
-		.scsi_type	= MAC_SCSI_OLD,
-		.scc_type	= MAC_SCC_II,
-		.nubus_type	= MAC_NUBUS,
-		.floppy_type	= MAC_FLOPPY_SWIM_ADDR2,
-	}, {
-		.ident		= MAC_MODEL_CCLII,
-		.name		= "Color Classic II",
-		.adb_type	= MAC_ADB_CUDA,
-		.via_type	= MAC_VIA_IICI,
-		.scsi_type	= MAC_SCSI_OLD,
-		.scc_type	= MAC_SCC_II,
-		.nubus_type	= MAC_NUBUS,
-		.floppy_type	= MAC_FLOPPY_SWIM_ADDR2,
-	},
-
-	/*
-	 * Some Mac LC machines. Basically the same as the IIci, ADB like IIsi
-	 */
-
-	{
-		.ident		= MAC_MODEL_LC,
-		.name		= "LC",
-		.adb_type	= MAC_ADB_IISI,
-		.via_type	= MAC_VIA_IICI,
-		.scsi_type	= MAC_SCSI_OLD,
-		.scc_type	= MAC_SCC_II,
-		.nubus_type	= MAC_NUBUS,
-		.floppy_type	= MAC_FLOPPY_SWIM_ADDR2,
-	}, {
-		.ident		= MAC_MODEL_LCII,
-		.name		= "LC II",
-		.adb_type	= MAC_ADB_IISI,
-		.via_type	= MAC_VIA_IICI,
-		.scsi_type	= MAC_SCSI_OLD,
-		.scc_type	= MAC_SCC_II,
-		.nubus_type	= MAC_NUBUS,
-		.floppy_type	= MAC_FLOPPY_SWIM_ADDR2,
-	}, {
-		.ident		= MAC_MODEL_LCIII,
-		.name		= "LC III",
-		.adb_type	= MAC_ADB_IISI,
-		.via_type	= MAC_VIA_IICI,
-		.scsi_type	= MAC_SCSI_OLD,
-		.scc_type	= MAC_SCC_II,
-		.nubus_type	= MAC_NUBUS,
-		.floppy_type	= MAC_FLOPPY_SWIM_ADDR2,
-	},
-
-	/*
-	 * Quadra. Video is at 0xF9000000, via is like a MacII. We label it
-	 * differently as some of the stuff connected to VIA2 seems different.
-	 * Better SCSI chip and onboard ethernet using a NatSemi SONIC except
-	 * the 660AV and 840AV which use an AMD 79C940 (MACE).
-	 * The 700, 900 and 950 have some I/O chips in the wrong place to
-	 * confuse us. The 840AV has a SCSI location of its own (same as
-	 * the 660AV).
-	 */
-
-	{
-		.ident		= MAC_MODEL_Q605,
-		.name		= "Quadra 605",
-		.adb_type	= MAC_ADB_CUDA,
-		.via_type	= MAC_VIA_QUADRA,
-		.scsi_type	= MAC_SCSI_QUADRA,
-		.scc_type	= MAC_SCC_QUADRA,
-		.nubus_type	= MAC_NUBUS,
-		.floppy_type	= MAC_FLOPPY_SWIM_ADDR1,
-	}, {
-		.ident		= MAC_MODEL_Q605_ACC,
-		.name		= "Quadra 605",
-		.adb_type	= MAC_ADB_CUDA,
-		.via_type	= MAC_VIA_QUADRA,
-		.scsi_type	= MAC_SCSI_QUADRA,
-		.scc_type	= MAC_SCC_QUADRA,
-		.nubus_type	= MAC_NUBUS,
-		.floppy_type	= MAC_FLOPPY_SWIM_ADDR1,
-	}, {
-		.ident		= MAC_MODEL_Q610,
-		.name		= "Quadra 610",
-		.adb_type	= MAC_ADB_II,
-		.via_type	= MAC_VIA_QUADRA,
-		.scsi_type	= MAC_SCSI_QUADRA,
-		.scc_type	= MAC_SCC_QUADRA,
-		.ether_type	= MAC_ETHER_SONIC,
-		.nubus_type	= MAC_NUBUS,
-		.floppy_type	= MAC_FLOPPY_SWIM_ADDR1,
-	}, {
-		.ident		= MAC_MODEL_Q630,
-		.name		= "Quadra 630",
-		.adb_type	= MAC_ADB_CUDA,
-		.via_type	= MAC_VIA_QUADRA,
-		.scsi_type	= MAC_SCSI_QUADRA,
-		.ide_type	= MAC_IDE_QUADRA,
-		.scc_type	= MAC_SCC_QUADRA,
-		.ether_type	= MAC_ETHER_SONIC,
-		.nubus_type	= MAC_NUBUS,
-		.floppy_type	= MAC_FLOPPY_SWIM_ADDR1,
-	}, {
-		.ident		= MAC_MODEL_Q650,
-		.name		= "Quadra 650",
-		.adb_type	= MAC_ADB_II,
-		.via_type	= MAC_VIA_QUADRA,
-		.scsi_type	= MAC_SCSI_QUADRA,
-		.scc_type	= MAC_SCC_QUADRA,
-		.ether_type	= MAC_ETHER_SONIC,
-		.nubus_type	= MAC_NUBUS,
-		.floppy_type	= MAC_FLOPPY_SWIM_ADDR1,
-	},
-	/* The Q700 does have a NS Sonic */
-	{
-		.ident		= MAC_MODEL_Q700,
-		.name		= "Quadra 700",
-		.adb_type	= MAC_ADB_II,
-		.via_type	= MAC_VIA_QUADRA,
-		.scsi_type	= MAC_SCSI_QUADRA2,
-		.scc_type	= MAC_SCC_QUADRA,
-		.ether_type	= MAC_ETHER_SONIC,
-		.nubus_type	= MAC_NUBUS,
-		.floppy_type	= MAC_FLOPPY_SWIM_ADDR1,
-	}, {
-		.ident		= MAC_MODEL_Q800,
-		.name		= "Quadra 800",
-		.adb_type	= MAC_ADB_II,
-		.via_type	= MAC_VIA_QUADRA,
-		.scsi_type	= MAC_SCSI_QUADRA,
-		.scc_type	= MAC_SCC_QUADRA,
-		.ether_type	= MAC_ETHER_SONIC,
-		.nubus_type	= MAC_NUBUS,
-		.floppy_type	= MAC_FLOPPY_SWIM_ADDR1,
-	}, {
-		.ident		= MAC_MODEL_Q840,
-		.name		= "Quadra 840AV",
-		.adb_type	= MAC_ADB_CUDA,
-		.via_type	= MAC_VIA_QUADRA,
-		.scsi_type	= MAC_SCSI_QUADRA3,
-		.scc_type	= MAC_SCC_PSC,
-		.ether_type	= MAC_ETHER_MACE,
-		.nubus_type	= MAC_NUBUS,
-		.floppy_type	= MAC_FLOPPY_AV,
-	}, {
-		.ident		= MAC_MODEL_Q900,
-		.name		= "Quadra 900",
-		.adb_type	= MAC_ADB_IOP,
-		.via_type	= MAC_VIA_QUADRA,
-		.scsi_type	= MAC_SCSI_QUADRA2,
-		.scc_type	= MAC_SCC_IOP,
-		.ether_type	= MAC_ETHER_SONIC,
-		.nubus_type	= MAC_NUBUS,
-		.floppy_type	= MAC_FLOPPY_SWIM_IOP,
-	}, {
-		.ident		= MAC_MODEL_Q950,
-		.name		= "Quadra 950",
-		.adb_type	= MAC_ADB_IOP,
-		.via_type	= MAC_VIA_QUADRA,
-		.scsi_type	= MAC_SCSI_QUADRA2,
-		.scc_type	= MAC_SCC_IOP,
-		.ether_type	= MAC_ETHER_SONIC,
-		.nubus_type	= MAC_NUBUS,
-		.floppy_type	= MAC_FLOPPY_SWIM_IOP,
-	},
-
-	/*
-	 * Performa - more LC type machines
-	 */
-
-	{
-		.ident		= MAC_MODEL_P460,
-		.name		= "Performa 460",
-		.adb_type	= MAC_ADB_IISI,
-		.via_type	= MAC_VIA_IICI,
-		.scsi_type	= MAC_SCSI_OLD,
-		.scc_type	= MAC_SCC_II,
-		.nubus_type	= MAC_NUBUS,
-		.floppy_type	= MAC_FLOPPY_SWIM_ADDR2,
-	}, {
-		.ident		= MAC_MODEL_P475,
-		.name		= "Performa 475",
-		.adb_type	= MAC_ADB_CUDA,
-		.via_type	= MAC_VIA_QUADRA,
-		.scsi_type	= MAC_SCSI_QUADRA,
-		.scc_type	= MAC_SCC_II,
-		.nubus_type	= MAC_NUBUS,
-		.floppy_type	= MAC_FLOPPY_SWIM_ADDR1,
-	}, {
-		.ident		= MAC_MODEL_P475F,
-		.name		= "Performa 475",
-		.adb_type	= MAC_ADB_CUDA,
-		.via_type	= MAC_VIA_QUADRA,
-		.scsi_type	= MAC_SCSI_QUADRA,
-		.scc_type	= MAC_SCC_II,
-		.nubus_type	= MAC_NUBUS,
-		.floppy_type	= MAC_FLOPPY_SWIM_ADDR1,
-	}, {
-		.ident		= MAC_MODEL_P520,
-		.name		= "Performa 520",
-		.adb_type	= MAC_ADB_CUDA,
-		.via_type	= MAC_VIA_IICI,
-		.scsi_type	= MAC_SCSI_OLD,
-		.scc_type	= MAC_SCC_II,
-		.nubus_type	= MAC_NUBUS,
-		.floppy_type	= MAC_FLOPPY_SWIM_ADDR2,
-	}, {
-		.ident		= MAC_MODEL_P550,
-		.name		= "Performa 550",
-		.adb_type	= MAC_ADB_CUDA,
-		.via_type	= MAC_VIA_IICI,
-		.scsi_type	= MAC_SCSI_OLD,
-		.scc_type	= MAC_SCC_II,
-		.nubus_type	= MAC_NUBUS,
-		.floppy_type	= MAC_FLOPPY_SWIM_ADDR2,
-	},
-	/* These have the comm slot, and therefore possibly SONIC ethernet */
-	{
-		.ident		= MAC_MODEL_P575,
-		.name		= "Performa 575",
-		.adb_type	= MAC_ADB_CUDA,
-		.via_type	= MAC_VIA_QUADRA,
-		.scsi_type	= MAC_SCSI_QUADRA,
-		.scc_type	= MAC_SCC_II,
-		.ether_type	= MAC_ETHER_SONIC,
-		.nubus_type	= MAC_NUBUS,
-		.floppy_type	= MAC_FLOPPY_SWIM_ADDR1,
-	}, {
-		.ident		= MAC_MODEL_P588,
-		.name		= "Performa 588",
-		.adb_type	= MAC_ADB_CUDA,
-		.via_type	= MAC_VIA_QUADRA,
-		.scsi_type	= MAC_SCSI_QUADRA,
-		.ide_type	= MAC_IDE_QUADRA,
-		.scc_type	= MAC_SCC_II,
-		.ether_type	= MAC_ETHER_SONIC,
-		.nubus_type	= MAC_NUBUS,
-		.floppy_type	= MAC_FLOPPY_SWIM_ADDR1,
-	}, {
-		.ident		= MAC_MODEL_TV,
-		.name		= "TV",
-		.adb_type	= MAC_ADB_CUDA,
-		.via_type	= MAC_VIA_IICI,
-		.scsi_type	= MAC_SCSI_OLD,
-		.scc_type	= MAC_SCC_II,
-		.nubus_type	= MAC_NUBUS,
-		.floppy_type	= MAC_FLOPPY_SWIM_ADDR2,
-	}, {
-		.ident		= MAC_MODEL_P600,
-		.name		= "Performa 600",
-		.adb_type	= MAC_ADB_IISI,
-		.via_type	= MAC_VIA_IICI,
-		.scsi_type	= MAC_SCSI_OLD,
-		.scc_type	= MAC_SCC_II,
-		.nubus_type	= MAC_NUBUS,
-		.floppy_type	= MAC_FLOPPY_SWIM_ADDR2,
-	},
-
-	/*
-	 * Centris - just guessing again; maybe like Quadra.
-	 * The C610 may or may not have SONIC. We probe to make sure.
-	 */
-
-	{
-		.ident		= MAC_MODEL_C610,
-		.name		= "Centris 610",
-		.adb_type	= MAC_ADB_II,
-		.via_type	= MAC_VIA_QUADRA,
-		.scsi_type	= MAC_SCSI_QUADRA,
-		.scc_type	= MAC_SCC_QUADRA,
-		.ether_type	= MAC_ETHER_SONIC,
-		.nubus_type	= MAC_NUBUS,
-		.floppy_type	= MAC_FLOPPY_SWIM_ADDR1,
-	}, {
-		.ident		= MAC_MODEL_C650,
-		.name		= "Centris 650",
-		.adb_type	= MAC_ADB_II,
-		.via_type	= MAC_VIA_QUADRA,
-		.scsi_type	= MAC_SCSI_QUADRA,
-		.scc_type	= MAC_SCC_QUADRA,
-		.ether_type	= MAC_ETHER_SONIC,
-		.nubus_type	= MAC_NUBUS,
-		.floppy_type	= MAC_FLOPPY_SWIM_ADDR1,
-	}, {
-		.ident		= MAC_MODEL_C660,
-		.name		= "Centris 660AV",
-		.adb_type	= MAC_ADB_CUDA,
-		.via_type	= MAC_VIA_QUADRA,
-		.scsi_type	= MAC_SCSI_QUADRA3,
-		.scc_type	= MAC_SCC_PSC,
-		.ether_type	= MAC_ETHER_MACE,
-		.nubus_type	= MAC_NUBUS,
-		.floppy_type	= MAC_FLOPPY_AV,
-	},
-
-	/*
-	 * The PowerBooks all the same "Combo" custom IC for SCSI and SCC
-	 * and a PMU (in two variations?) for ADB. Most of them use the
-	 * Quadra-style VIAs. A few models also have IDE from hell.
-	 */
-
-	{
-		.ident		= MAC_MODEL_PB140,
-		.name		= "PowerBook 140",
-		.adb_type	= MAC_ADB_PB1,
-		.via_type	= MAC_VIA_QUADRA,
-		.scsi_type	= MAC_SCSI_OLD,
-		.scc_type	= MAC_SCC_QUADRA,
-		.nubus_type	= MAC_NUBUS,
-		.floppy_type	= MAC_FLOPPY_SWIM_ADDR2,
-	}, {
-		.ident		= MAC_MODEL_PB145,
-		.name		= "PowerBook 145",
-		.adb_type	= MAC_ADB_PB1,
-		.via_type	= MAC_VIA_QUADRA,
-		.scsi_type	= MAC_SCSI_OLD,
-		.scc_type	= MAC_SCC_QUADRA,
-		.nubus_type	= MAC_NUBUS,
-		.floppy_type	= MAC_FLOPPY_SWIM_ADDR2,
-	}, {
-		.ident		= MAC_MODEL_PB150,
-		.name		= "PowerBook 150",
-		.adb_type	= MAC_ADB_PB2,
-		.via_type	= MAC_VIA_IICI,
-		.scsi_type	= MAC_SCSI_OLD,
-		.ide_type	= MAC_IDE_PB,
-		.scc_type	= MAC_SCC_QUADRA,
-		.nubus_type	= MAC_NUBUS,
-		.floppy_type	= MAC_FLOPPY_SWIM_ADDR2,
-	}, {
-		.ident		= MAC_MODEL_PB160,
-		.name		= "PowerBook 160",
-		.adb_type	= MAC_ADB_PB1,
-		.via_type	= MAC_VIA_QUADRA,
-		.scsi_type	= MAC_SCSI_OLD,
-		.scc_type	= MAC_SCC_QUADRA,
-		.nubus_type	= MAC_NUBUS,
-		.floppy_type	= MAC_FLOPPY_SWIM_ADDR2,
-	}, {
-		.ident		= MAC_MODEL_PB165,
-		.name		= "PowerBook 165",
-		.adb_type	= MAC_ADB_PB1,
-		.via_type	= MAC_VIA_QUADRA,
-		.scsi_type	= MAC_SCSI_OLD,
-		.scc_type	= MAC_SCC_QUADRA,
-		.nubus_type	= MAC_NUBUS,
-		.floppy_type	= MAC_FLOPPY_SWIM_ADDR2,
-	}, {
-		.ident		= MAC_MODEL_PB165C,
-		.name		= "PowerBook 165c",
-		.adb_type	= MAC_ADB_PB1,
-		.via_type	= MAC_VIA_QUADRA,
-		.scsi_type	= MAC_SCSI_OLD,
-		.scc_type	= MAC_SCC_QUADRA,
-		.nubus_type	= MAC_NUBUS,
-		.floppy_type	= MAC_FLOPPY_SWIM_ADDR2,
-	}, {
-		.ident		= MAC_MODEL_PB170,
-		.name		= "PowerBook 170",
-		.adb_type	= MAC_ADB_PB1,
-		.via_type	= MAC_VIA_QUADRA,
-		.scsi_type	= MAC_SCSI_OLD,
-		.scc_type	= MAC_SCC_QUADRA,
-		.nubus_type	= MAC_NUBUS,
-		.floppy_type	= MAC_FLOPPY_SWIM_ADDR2,
-	}, {
-		.ident		= MAC_MODEL_PB180,
-		.name		= "PowerBook 180",
-		.adb_type	= MAC_ADB_PB1,
-		.via_type	= MAC_VIA_QUADRA,
-		.scsi_type	= MAC_SCSI_OLD,
-		.scc_type	= MAC_SCC_QUADRA,
-		.nubus_type	= MAC_NUBUS,
-		.floppy_type	= MAC_FLOPPY_SWIM_ADDR2,
-	}, {
-		.ident		= MAC_MODEL_PB180C,
-		.name		= "PowerBook 180c",
-		.adb_type	= MAC_ADB_PB1,
-		.via_type	= MAC_VIA_QUADRA,
-		.scsi_type	= MAC_SCSI_OLD,
-		.scc_type	= MAC_SCC_QUADRA,
-		.nubus_type	= MAC_NUBUS,
-		.floppy_type	= MAC_FLOPPY_SWIM_ADDR2,
-	}, {
-		.ident		= MAC_MODEL_PB190,
-		.name		= "PowerBook 190",
-		.adb_type	= MAC_ADB_PB2,
-		.via_type	= MAC_VIA_QUADRA,
-		.scsi_type	= MAC_SCSI_OLD,
-		.ide_type	= MAC_IDE_BABOON,
-		.scc_type	= MAC_SCC_QUADRA,
-		.nubus_type	= MAC_NUBUS,
-		.floppy_type	= MAC_FLOPPY_SWIM_ADDR2,
-	}, {
-		.ident		= MAC_MODEL_PB520,
-		.name		= "PowerBook 520",
-		.adb_type	= MAC_ADB_PB2,
-		.via_type	= MAC_VIA_QUADRA,
-		.scsi_type	= MAC_SCSI_OLD,
-		.scc_type	= MAC_SCC_QUADRA,
-		.ether_type	= MAC_ETHER_SONIC,
-		.nubus_type	= MAC_NUBUS,
-		.floppy_type	= MAC_FLOPPY_SWIM_ADDR2,
-	},
-
-	/*
-	 * PowerBook Duos are pretty much like normal PowerBooks
-	 * All of these probably have onboard SONIC in the Dock which
-	 * means we'll have to probe for it eventually.
-	 */
-
-	{
-		.ident		= MAC_MODEL_PB210,
-		.name		= "PowerBook Duo 210",
-		.adb_type	= MAC_ADB_PB2,
-		.via_type	= MAC_VIA_IICI,
-		.scsi_type	= MAC_SCSI_OLD,
-		.scc_type	= MAC_SCC_QUADRA,
-		.nubus_type	= MAC_NUBUS,
-		.floppy_type	= MAC_FLOPPY_SWIM_ADDR2,
-	}, {
-		.ident		= MAC_MODEL_PB230,
-		.name		= "PowerBook Duo 230",
-		.adb_type	= MAC_ADB_PB2,
-		.via_type	= MAC_VIA_IICI,
-		.scsi_type	= MAC_SCSI_OLD,
-		.scc_type	= MAC_SCC_QUADRA,
-		.nubus_type	= MAC_NUBUS,
-		.floppy_type	= MAC_FLOPPY_SWIM_ADDR2,
-	}, {
-		.ident		= MAC_MODEL_PB250,
-		.name		= "PowerBook Duo 250",
-		.adb_type	= MAC_ADB_PB2,
-		.via_type	= MAC_VIA_IICI,
-		.scsi_type	= MAC_SCSI_OLD,
-		.scc_type	= MAC_SCC_QUADRA,
-		.nubus_type	= MAC_NUBUS,
-		.floppy_type	= MAC_FLOPPY_SWIM_ADDR2,
-	}, {
-		.ident		= MAC_MODEL_PB270C,
-		.name		= "PowerBook Duo 270c",
-		.adb_type	= MAC_ADB_PB2,
-		.via_type	= MAC_VIA_IICI,
-		.scsi_type	= MAC_SCSI_OLD,
-		.scc_type	= MAC_SCC_QUADRA,
-		.nubus_type	= MAC_NUBUS,
-		.floppy_type	= MAC_FLOPPY_SWIM_ADDR2,
-	}, {
-		.ident		= MAC_MODEL_PB280,
-		.name		= "PowerBook Duo 280",
-		.adb_type	= MAC_ADB_PB2,
-		.via_type	= MAC_VIA_IICI,
-		.scsi_type	= MAC_SCSI_OLD,
-		.scc_type	= MAC_SCC_QUADRA,
-		.nubus_type	= MAC_NUBUS,
-		.floppy_type	= MAC_FLOPPY_SWIM_ADDR2,
-	}, {
-		.ident		= MAC_MODEL_PB280C,
-		.name		= "PowerBook Duo 280c",
-		.adb_type	= MAC_ADB_PB2,
-		.via_type	= MAC_VIA_IICI,
-		.scsi_type	= MAC_SCSI_OLD,
-		.scc_type	= MAC_SCC_QUADRA,
-		.nubus_type	= MAC_NUBUS,
-		.floppy_type	= MAC_FLOPPY_SWIM_ADDR2,
-	},
-
-	/*
-	 * Other stuff?
-	 */
-
-	{
-		.ident		= -1
-	}
-};
-
-static struct resource scc_a_rsrcs[] = {
-	{ .flags = IORESOURCE_MEM },
-	{ .flags = IORESOURCE_IRQ },
-};
-
-static struct resource scc_b_rsrcs[] = {
-	{ .flags = IORESOURCE_MEM },
-	{ .flags = IORESOURCE_IRQ },
-};
-
-struct platform_device scc_a_pdev = {
-	.name           = "scc",
-	.id             = 0,
-	.num_resources  = ARRAY_SIZE(scc_a_rsrcs),
-	.resource       = scc_a_rsrcs,
-};
-EXPORT_SYMBOL(scc_a_pdev);
-
-struct platform_device scc_b_pdev = {
-	.name           = "scc",
-	.id             = 1,
-	.num_resources  = ARRAY_SIZE(scc_b_rsrcs),
-	.resource       = scc_b_rsrcs,
-};
-EXPORT_SYMBOL(scc_b_pdev);
-
-static void __init mac_identify(void)
-{
-	struct mac_model *m;
-
-	/* Penguin data useful? */
-	int model = mac_bi_data.id;
-	if (!model) {
-		/* no bootinfo model id -> NetBSD booter was used! */
-		/* XXX FIXME: breaks for model > 31 */
-		model = (mac_bi_data.cpuid >> 2) & 63;
-		printk(KERN_WARNING "No bootinfo model ID, using cpuid instead "
-		       "(obsolete bootloader?)\n");
-	}
-
-	macintosh_config = mac_data_table;
-	for (m = macintosh_config; m->ident != -1; m++) {
-		if (m->ident == model) {
-			macintosh_config = m;
-			break;
-		}
-	}
-
-	/* Set up serial port resources for the console initcall. */
-
-	scc_a_rsrcs[0].start = (resource_size_t) mac_bi_data.sccbase + 2;
-	scc_a_rsrcs[0].end   = scc_a_rsrcs[0].start;
-	scc_b_rsrcs[0].start = (resource_size_t) mac_bi_data.sccbase;
-	scc_b_rsrcs[0].end   = scc_b_rsrcs[0].start;
-
-	switch (macintosh_config->scc_type) {
-	case MAC_SCC_PSC:
-		scc_a_rsrcs[1].start = scc_a_rsrcs[1].end = IRQ_MAC_SCC_A;
-		scc_b_rsrcs[1].start = scc_b_rsrcs[1].end = IRQ_MAC_SCC_B;
-		break;
-	default:
-		/* On non-PSC machines, the serial ports share an IRQ. */
-		if (macintosh_config->ident == MAC_MODEL_IIFX) {
-			scc_a_rsrcs[1].start = scc_a_rsrcs[1].end = IRQ_MAC_SCC;
-			scc_b_rsrcs[1].start = scc_b_rsrcs[1].end = IRQ_MAC_SCC;
-		} else {
-			scc_a_rsrcs[1].start = scc_a_rsrcs[1].end = IRQ_AUTO_4;
-			scc_b_rsrcs[1].start = scc_b_rsrcs[1].end = IRQ_AUTO_4;
-		}
-		break;
-	}
-
-	/*
-	 * We need to pre-init the IOPs, if any. Otherwise
-	 * the serial console won't work if the user had
-	 * the serial ports set to "Faster" mode in MacOS.
-	 */
-	iop_preinit();
-
-	printk(KERN_INFO "Detected Macintosh model: %d\n", model);
-
-	/*
-	 * Report booter data:
-	 */
-	printk(KERN_DEBUG " Penguin bootinfo data:\n");
-	printk(KERN_DEBUG " Video: addr 0x%lx "
-		"row 0x%lx depth %lx dimensions %ld x %ld\n",
-		mac_bi_data.videoaddr, mac_bi_data.videorow,
-		mac_bi_data.videodepth, mac_bi_data.dimensions & 0xFFFF,
-		mac_bi_data.dimensions >> 16);
-	printk(KERN_DEBUG " Videological 0x%lx phys. 0x%lx, SCC at 0x%lx\n",
-		mac_bi_data.videological, mac_orig_videoaddr,
-		mac_bi_data.sccbase);
-	printk(KERN_DEBUG " Boottime: 0x%lx GMTBias: 0x%lx\n",
-		mac_bi_data.boottime, mac_bi_data.gmtbias);
-	printk(KERN_DEBUG " Machine ID: %ld CPUid: 0x%lx memory size: 0x%lx\n",
-		mac_bi_data.id, mac_bi_data.cpuid, mac_bi_data.memsize);
-
-	iop_init();
-	via_init();
-	oss_init();
-	psc_init();
-	baboon_init();
-
-#ifdef CONFIG_ADB_CUDA
-	find_via_cuda();
-#endif
-}
-
-static void __init mac_report_hardware(void)
-{
-	printk(KERN_INFO "Apple Macintosh %s\n", macintosh_config->name);
-}
-
-static void mac_get_model(char *str)
-{
-	strcpy(str, "Macintosh ");
-	strcat(str, macintosh_config->name);
-}
-
-static struct resource swim_rsrc = { .flags = IORESOURCE_MEM };
-
-static struct platform_device swim_pdev = {
-	.name		= "swim",
-	.id		= -1,
-	.num_resources	= 1,
-	.resource	= &swim_rsrc,
-};
-
-static struct platform_device esp_0_pdev = {
-	.name		= "mac_esp",
-	.id		= 0,
-};
-
-static struct platform_device esp_1_pdev = {
-	.name		= "mac_esp",
-	.id		= 1,
-};
-
-static struct platform_device sonic_pdev = {
-	.name		= "macsonic",
-	.id		= -1,
-};
-
-static struct platform_device mace_pdev = {
-	.name		= "macmace",
-	.id		= -1,
-};
-
-int __init mac_platform_init(void)
-{
-	u8 *swim_base;
-
-	if (!MACH_IS_MAC)
-		return -ENODEV;
-
-	/*
-	 * Serial devices
-	 */
-
-	platform_device_register(&scc_a_pdev);
-	platform_device_register(&scc_b_pdev);
-
-	/*
-	 * Floppy device
-	 */
-
-	switch (macintosh_config->floppy_type) {
-	case MAC_FLOPPY_SWIM_ADDR1:
-		swim_base = (u8 *)(VIA1_BASE + 0x1E000);
-		break;
-	case MAC_FLOPPY_SWIM_ADDR2:
-		swim_base = (u8 *)(VIA1_BASE + 0x16000);
-		break;
-	default:
-		swim_base = NULL;
-		break;
-	}
-
-	if (swim_base) {
-		swim_rsrc.start = (resource_size_t) swim_base,
-		swim_rsrc.end   = (resource_size_t) swim_base + 0x2000,
-		platform_device_register(&swim_pdev);
-	}
-
-	/*
-	 * SCSI device(s)
-	 */
-
-	switch (macintosh_config->scsi_type) {
-	case MAC_SCSI_QUADRA:
-	case MAC_SCSI_QUADRA3:
-		platform_device_register(&esp_0_pdev);
-		break;
-	case MAC_SCSI_QUADRA2:
-		platform_device_register(&esp_0_pdev);
-		if ((macintosh_config->ident == MAC_MODEL_Q900) ||
-		    (macintosh_config->ident == MAC_MODEL_Q950))
-			platform_device_register(&esp_1_pdev);
-		break;
-	}
-
-	/*
-	 * Ethernet device
-	 */
-
-	switch (macintosh_config->ether_type) {
-	case MAC_ETHER_SONIC:
-		platform_device_register(&sonic_pdev);
-		break;
-	case MAC_ETHER_MACE:
-		platform_device_register(&mace_pdev);
-		break;
-	}
-
-	return 0;
-}
-
-arch_initcall(mac_platform_init);
diff --git a/ANDROID_3.4.5/arch/m68k/mac/iop.c b/ANDROID_3.4.5/arch/m68k/mac/iop.c
deleted file mode 100644
index 7d8d4612..00000000
--- a/ANDROID_3.4.5/arch/m68k/mac/iop.c
+++ /dev/null
@@ -1,624 +0,0 @@
-/*
- * I/O Processor (IOP) management
- * Written and (C) 1999 by Joshua M. Thompson (funaho@jurai.org)
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice and this list of conditions.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice and this list of conditions in the documentation and/or other
- *    materials provided with the distribution.
- */
-
-/*
- * The IOP chips are used in the IIfx and some Quadras (900, 950) to manage
- * serial and ADB. They are actually a 6502 processor and some glue logic.
- *
- * 990429 (jmt) - Initial implementation, just enough to knock the SCC IOP
- *		  into compatible mode so nobody has to fiddle with the
- *		  Serial Switch control panel anymore.
- * 990603 (jmt) - Added code to grab the correct ISM IOP interrupt for OSS
- *		  and non-OSS machines (at least I hope it's correct on a
- *		  non-OSS machine -- someone with a Q900 or Q950 needs to
- *		  check this.)
- * 990605 (jmt) - Rearranged things a bit wrt IOP detection; iop_present is
- *		  gone, IOP base addresses are now in an array and the
- *		  globally-visible functions take an IOP number instead of an
- *		  an actual base address.
- * 990610 (jmt) - Finished the message passing framework and it seems to work.
- *		  Sending _definitely_ works; my adb-bus.c mods can send
- *		  messages and receive the MSG_COMPLETED status back from the
- *		  IOP. The trick now is figuring out the message formats.
- * 990611 (jmt) - More cleanups. Fixed problem where unclaimed messages on a
- *		  receive channel were never properly acknowledged. Bracketed
- *		  the remaining debug printk's with #ifdef's and disabled
- *		  debugging. I can now type on the console.
- * 990612 (jmt) - Copyright notice added. Reworked the way replies are handled.
- *		  It turns out that replies are placed back in the send buffer
- *		  for that channel; messages on the receive channels are always
- *		  unsolicited messages from the IOP (and our replies to them
- *		  should go back in the receive channel.) Also added tracking
- *		  of device names to the listener functions ala the interrupt
- *		  handlers.
- * 990729 (jmt) - Added passing of pt_regs structure to IOP handlers. This is
- *		  used by the new unified ADB driver.
- *
- * TODO:
- *
- * o Something should be periodically checking iop_alive() to make sure the
- *   IOP hasn't died.
- * o Some of the IOP manager routines need better error checking and
- *   return codes. Nothing major, just prettying up.
- */
-
-/*
- * -----------------------
- * IOP Message Passing 101
- * -----------------------
- *
- * The host talks to the IOPs using a rather simple message-passing scheme via
- * a shared memory area in the IOP RAM. Each IOP has seven "channels"; each
- * channel is conneced to a specific software driver on the IOP. For example
- * on the SCC IOP there is one channel for each serial port. Each channel has
- * an incoming and and outgoing message queue with a depth of one.
- *
- * A message is 32 bytes plus a state byte for the channel (MSG_IDLE, MSG_NEW,
- * MSG_RCVD, MSG_COMPLETE). To send a message you copy the message into the
- * buffer, set the state to MSG_NEW and signal the IOP by setting the IRQ flag
- * in the IOP control to 1. The IOP will move the state to MSG_RCVD when it
- * receives the message and then to MSG_COMPLETE when the message processing
- * has completed. It is the host's responsibility at that point to read the
- * reply back out of the send channel buffer and reset the channel state back
- * to MSG_IDLE.
- *
- * To receive message from the IOP the same procedure is used except the roles
- * are reversed. That is, the IOP puts message in the channel with a state of
- * MSG_NEW, and the host receives the message and move its state to MSG_RCVD
- * and then to MSG_COMPLETE when processing is completed and the reply (if any)
- * has been placed back in the receive channel. The IOP will then reset the
- * channel state to MSG_IDLE.
- *
- * Two sets of host interrupts are provided, INT0 and INT1. Both appear on one
- * interrupt level; they are distinguished by a pair of bits in the IOP status
- * register. The IOP will raise INT0 when one or more messages in the send
- * channels have gone to the MSG_COMPLETE state and it will raise INT1 when one
- * or more messages on the receive channels have gone to the MSG_NEW state.
- *
- * Since each channel handles only one message we have to implement a small
- * interrupt-driven queue on our end. Messages to be sent are placed on the
- * queue for sending and contain a pointer to an optional callback function.
- * The handler for a message is called when the message state goes to
- * MSG_COMPLETE.
- *
- * For receiving message we maintain a list of handler functions to call when
- * a message is received on that IOP/channel combination. The handlers are
- * called much like an interrupt handler and are passed a copy of the message
- * from the IOP. The message state will be in MSG_RCVD while the handler runs;
- * it is the handler's responsibility to call iop_complete_message() when
- * finished; this function moves the message state to MSG_COMPLETE and signals
- * the IOP. This two-step process is provided to allow the handler to defer
- * message processing to a bottom-half handler if the processing will take
- * a significant amount of time (handlers are called at interrupt time so they
- * should execute quickly.)
- */
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-
-#include <asm/bootinfo.h>
-#include <asm/macintosh.h>
-#include <asm/macints.h>
-#include <asm/mac_iop.h>
-
-/*#define DEBUG_IOP*/
-
-/* Set to non-zero if the IOPs are present. Set by iop_init() */
-
-int iop_scc_present,iop_ism_present;
-
-/* structure for tracking channel listeners */
-
-struct listener {
-	const char *devname;
-	void (*handler)(struct iop_msg *);
-};
-
-/*
- * IOP structures for the two IOPs
- *
- * The SCC IOP controls both serial ports (A and B) as its two functions.
- * The ISM IOP controls the SWIM (floppy drive) and ADB.
- */
-
-static volatile struct mac_iop *iop_base[NUM_IOPS];
-
-/*
- * IOP message queues
- */
-
-static struct iop_msg iop_msg_pool[NUM_IOP_MSGS];
-static struct iop_msg *iop_send_queue[NUM_IOPS][NUM_IOP_CHAN];
-static struct listener iop_listeners[NUM_IOPS][NUM_IOP_CHAN];
-
-irqreturn_t iop_ism_irq(int, void *);
-
-/*
- * Private access functions
- */
-
-static __inline__ void iop_loadaddr(volatile struct mac_iop *iop, __u16 addr)
-{
-	iop->ram_addr_lo = addr;
-	iop->ram_addr_hi = addr >> 8;
-}
-
-static __inline__ __u8 iop_readb(volatile struct mac_iop *iop, __u16 addr)
-{
-	iop->ram_addr_lo = addr;
-	iop->ram_addr_hi = addr >> 8;
-	return iop->ram_data;
-}
-
-static __inline__ void iop_writeb(volatile struct mac_iop *iop, __u16 addr, __u8 data)
-{
-	iop->ram_addr_lo = addr;
-	iop->ram_addr_hi = addr >> 8;
-	iop->ram_data = data;
-}
-
-static __inline__ void iop_stop(volatile struct mac_iop *iop)
-{
-	iop->status_ctrl &= ~IOP_RUN;
-}
-
-static __inline__ void iop_start(volatile struct mac_iop *iop)
-{
-	iop->status_ctrl = IOP_RUN | IOP_AUTOINC;
-}
-
-static __inline__ void iop_bypass(volatile struct mac_iop *iop)
-{
-	iop->status_ctrl |= IOP_BYPASS;
-}
-
-static __inline__ void iop_interrupt(volatile struct mac_iop *iop)
-{
-	iop->status_ctrl |= IOP_IRQ;
-}
-
-static int iop_alive(volatile struct mac_iop *iop)
-{
-	int retval;
-
-	retval = (iop_readb(iop, IOP_ADDR_ALIVE) == 0xFF);
-	iop_writeb(iop, IOP_ADDR_ALIVE, 0);
-	return retval;
-}
-
-static struct iop_msg *iop_alloc_msg(void)
-{
-	int i;
-	unsigned long flags;
-
-	local_irq_save(flags);
-
-	for (i = 0 ; i < NUM_IOP_MSGS ; i++) {
-		if (iop_msg_pool[i].status == IOP_MSGSTATUS_UNUSED) {
-			iop_msg_pool[i].status = IOP_MSGSTATUS_WAITING;
-			local_irq_restore(flags);
-			return &iop_msg_pool[i];
-		}
-	}
-
-	local_irq_restore(flags);
-	return NULL;
-}
-
-static void iop_free_msg(struct iop_msg *msg)
-{
-	msg->status = IOP_MSGSTATUS_UNUSED;
-}
-
-/*
- * This is called by the startup code before anything else. Its purpose
- * is to find and initialize the IOPs early in the boot sequence, so that
- * the serial IOP can be placed into bypass mode _before_ we try to
- * initialize the serial console.
- */
-
-void __init iop_preinit(void)
-{
-	if (macintosh_config->scc_type == MAC_SCC_IOP) {
-		if (macintosh_config->ident == MAC_MODEL_IIFX) {
-			iop_base[IOP_NUM_SCC] = (struct mac_iop *) SCC_IOP_BASE_IIFX;
-		} else {
-			iop_base[IOP_NUM_SCC] = (struct mac_iop *) SCC_IOP_BASE_QUADRA;
-		}
-		iop_base[IOP_NUM_SCC]->status_ctrl = 0x87;
-		iop_scc_present = 1;
-	} else {
-		iop_base[IOP_NUM_SCC] = NULL;
-		iop_scc_present = 0;
-	}
-	if (macintosh_config->adb_type == MAC_ADB_IOP) {
-		if (macintosh_config->ident == MAC_MODEL_IIFX) {
-			iop_base[IOP_NUM_ISM] = (struct mac_iop *) ISM_IOP_BASE_IIFX;
-		} else {
-			iop_base[IOP_NUM_ISM] = (struct mac_iop *) ISM_IOP_BASE_QUADRA;
-		}
-		iop_base[IOP_NUM_ISM]->status_ctrl = 0;
-		iop_ism_present = 1;
-	} else {
-		iop_base[IOP_NUM_ISM] = NULL;
-		iop_ism_present = 0;
-	}
-}
-
-/*
- * Initialize the IOPs, if present.
- */
-
-void __init iop_init(void)
-{
-	int i;
-
-	if (iop_scc_present) {
-		printk("IOP: detected SCC IOP at %p\n", iop_base[IOP_NUM_SCC]);
-	}
-	if (iop_ism_present) {
-		printk("IOP: detected ISM IOP at %p\n", iop_base[IOP_NUM_ISM]);
-		iop_start(iop_base[IOP_NUM_ISM]);
-		iop_alive(iop_base[IOP_NUM_ISM]); /* clears the alive flag */
-	}
-
-	/* Make the whole pool available and empty the queues */
-
-	for (i = 0 ; i < NUM_IOP_MSGS ; i++) {
-		iop_msg_pool[i].status = IOP_MSGSTATUS_UNUSED;
-	}
-
-	for (i = 0 ; i < NUM_IOP_CHAN ; i++) {
-		iop_send_queue[IOP_NUM_SCC][i] = NULL;
-		iop_send_queue[IOP_NUM_ISM][i] = NULL;
-		iop_listeners[IOP_NUM_SCC][i].devname = NULL;
-		iop_listeners[IOP_NUM_SCC][i].handler = NULL;
-		iop_listeners[IOP_NUM_ISM][i].devname = NULL;
-		iop_listeners[IOP_NUM_ISM][i].handler = NULL;
-	}
-}
-
-/*
- * Register the interrupt handler for the IOPs.
- * TODO: might be wrong for non-OSS machines. Anyone?
- */
-
-void __init iop_register_interrupts(void)
-{
-	if (iop_ism_present) {
-		if (macintosh_config->ident == MAC_MODEL_IIFX) {
-			if (request_irq(IRQ_MAC_ADB, iop_ism_irq, 0,
-					"ISM IOP", (void *)IOP_NUM_ISM))
-				pr_err("Couldn't register ISM IOP interrupt\n");
-		} else {
-			if (request_irq(IRQ_VIA2_0, iop_ism_irq, 0, "ISM IOP",
-					(void *)IOP_NUM_ISM))
-				pr_err("Couldn't register ISM IOP interrupt\n");
-		}
-		if (!iop_alive(iop_base[IOP_NUM_ISM])) {
-			printk("IOP: oh my god, they killed the ISM IOP!\n");
-		} else {
-			printk("IOP: the ISM IOP seems to be alive.\n");
-		}
-	}
-}
-
-/*
- * Register or unregister a listener for a specific IOP and channel
- *
- * If the handler pointer is NULL the current listener (if any) is
- * unregistered. Otherwise the new listener is registered provided
- * there is no existing listener registered.
- */
-
-int iop_listen(uint iop_num, uint chan,
-		void (*handler)(struct iop_msg *),
-		const char *devname)
-{
-	if ((iop_num >= NUM_IOPS) || !iop_base[iop_num]) return -EINVAL;
-	if (chan >= NUM_IOP_CHAN) return -EINVAL;
-	if (iop_listeners[iop_num][chan].handler && handler) return -EINVAL;
-	iop_listeners[iop_num][chan].devname = devname;
-	iop_listeners[iop_num][chan].handler = handler;
-	return 0;
-}
-
-/*
- * Complete reception of a message, which just means copying the reply
- * into the buffer, setting the channel state to MSG_COMPLETE and
- * notifying the IOP.
- */
-
-void iop_complete_message(struct iop_msg *msg)
-{
-	int iop_num = msg->iop_num;
-	int chan = msg->channel;
-	int i,offset;
-
-#ifdef DEBUG_IOP
-	printk("iop_complete(%p): iop %d chan %d\n", msg, msg->iop_num, msg->channel);
-#endif
-
-	offset = IOP_ADDR_RECV_MSG + (msg->channel * IOP_MSG_LEN);
-
-	for (i = 0 ; i < IOP_MSG_LEN ; i++, offset++) {
-		iop_writeb(iop_base[iop_num], offset, msg->reply[i]);
-	}
-
-	iop_writeb(iop_base[iop_num],
-		   IOP_ADDR_RECV_STATE + chan, IOP_MSG_COMPLETE);
-	iop_interrupt(iop_base[msg->iop_num]);
-
-	iop_free_msg(msg);
-}
-
-/*
- * Actually put a message into a send channel buffer
- */
-
-static void iop_do_send(struct iop_msg *msg)
-{
-	volatile struct mac_iop *iop = iop_base[msg->iop_num];
-	int i,offset;
-
-	offset = IOP_ADDR_SEND_MSG + (msg->channel * IOP_MSG_LEN);
-
-	for (i = 0 ; i < IOP_MSG_LEN ; i++, offset++) {
-		iop_writeb(iop, offset, msg->message[i]);
-	}
-
-	iop_writeb(iop, IOP_ADDR_SEND_STATE + msg->channel, IOP_MSG_NEW);
-
-	iop_interrupt(iop);
-}
-
-/*
- * Handle sending a message on a channel that
- * has gone into the IOP_MSG_COMPLETE state.
- */
-
-static void iop_handle_send(uint iop_num, uint chan)
-{
-	volatile struct mac_iop *iop = iop_base[iop_num];
-	struct iop_msg *msg,*msg2;
-	int i,offset;
-
-#ifdef DEBUG_IOP
-	printk("iop_handle_send: iop %d channel %d\n", iop_num, chan);
-#endif
-
-	iop_writeb(iop, IOP_ADDR_SEND_STATE + chan, IOP_MSG_IDLE);
-
-	if (!(msg = iop_send_queue[iop_num][chan])) return;
-
-	msg->status = IOP_MSGSTATUS_COMPLETE;
-	offset = IOP_ADDR_SEND_MSG + (chan * IOP_MSG_LEN);
-	for (i = 0 ; i < IOP_MSG_LEN ; i++, offset++) {
-		msg->reply[i] = iop_readb(iop, offset);
-	}
-	if (msg->handler) (*msg->handler)(msg);
-	msg2 = msg;
-	msg = msg->next;
-	iop_free_msg(msg2);
-
-	iop_send_queue[iop_num][chan] = msg;
-	if (msg) iop_do_send(msg);
-}
-
-/*
- * Handle reception of a message on a channel that has
- * gone into the IOP_MSG_NEW state.
- */
-
-static void iop_handle_recv(uint iop_num, uint chan)
-{
-	volatile struct mac_iop *iop = iop_base[iop_num];
-	int i,offset;
-	struct iop_msg *msg;
-
-#ifdef DEBUG_IOP
-	printk("iop_handle_recv: iop %d channel %d\n", iop_num, chan);
-#endif
-
-	msg = iop_alloc_msg();
-	msg->iop_num = iop_num;
-	msg->channel = chan;
-	msg->status = IOP_MSGSTATUS_UNSOL;
-	msg->handler = iop_listeners[iop_num][chan].handler;
-
-	offset = IOP_ADDR_RECV_MSG + (chan * IOP_MSG_LEN);
-
-	for (i = 0 ; i < IOP_MSG_LEN ; i++, offset++) {
-		msg->message[i] = iop_readb(iop, offset);
-	}
-
-	iop_writeb(iop, IOP_ADDR_RECV_STATE + chan, IOP_MSG_RCVD);
-
-	/* If there is a listener, call it now. Otherwise complete */
-	/* the message ourselves to avoid possible stalls.         */
-
-	if (msg->handler) {
-		(*msg->handler)(msg);
-	} else {
-#ifdef DEBUG_IOP
-		printk("iop_handle_recv: unclaimed message on iop %d channel %d\n", iop_num, chan);
-		printk("iop_handle_recv:");
-		for (i = 0 ; i < IOP_MSG_LEN ; i++) {
-			printk(" %02X", (uint) msg->message[i]);
-		}
-		printk("\n");
-#endif
-		iop_complete_message(msg);
-	}
-}
-
-/*
- * Send a message
- *
- * The message is placed at the end of the send queue. Afterwards if the
- * channel is idle we force an immediate send of the next message in the
- * queue.
- */
-
-int iop_send_message(uint iop_num, uint chan, void *privdata,
-		      uint msg_len, __u8 *msg_data,
-		      void (*handler)(struct iop_msg *))
-{
-	struct iop_msg *msg, *q;
-
-	if ((iop_num >= NUM_IOPS) || !iop_base[iop_num]) return -EINVAL;
-	if (chan >= NUM_IOP_CHAN) return -EINVAL;
-	if (msg_len > IOP_MSG_LEN) return -EINVAL;
-
-	msg = iop_alloc_msg();
-	if (!msg) return -ENOMEM;
-
-	msg->next = NULL;
-	msg->status = IOP_MSGSTATUS_WAITING;
-	msg->iop_num = iop_num;
-	msg->channel = chan;
-	msg->caller_priv = privdata;
-	memcpy(msg->message, msg_data, msg_len);
-	msg->handler = handler;
-
-	if (!(q = iop_send_queue[iop_num][chan])) {
-		iop_send_queue[iop_num][chan] = msg;
-	} else {
-		while (q->next) q = q->next;
-		q->next = msg;
-	}
-
-	if (iop_readb(iop_base[iop_num],
-	    IOP_ADDR_SEND_STATE + chan) == IOP_MSG_IDLE) {
-		iop_do_send(msg);
-	}
-
-	return 0;
-}
-
-/*
- * Upload code to the shared RAM of an IOP.
- */
-
-void iop_upload_code(uint iop_num, __u8 *code_start,
-		     uint code_len, __u16 shared_ram_start)
-{
-	if ((iop_num >= NUM_IOPS) || !iop_base[iop_num]) return;
-
-	iop_loadaddr(iop_base[iop_num], shared_ram_start);
-
-	while (code_len--) {
-		iop_base[iop_num]->ram_data = *code_start++;
-	}
-}
-
-/*
- * Download code from the shared RAM of an IOP.
- */
-
-void iop_download_code(uint iop_num, __u8 *code_start,
-		       uint code_len, __u16 shared_ram_start)
-{
-	if ((iop_num >= NUM_IOPS) || !iop_base[iop_num]) return;
-
-	iop_loadaddr(iop_base[iop_num], shared_ram_start);
-
-	while (code_len--) {
-		*code_start++ = iop_base[iop_num]->ram_data;
-	}
-}
-
-/*
- * Compare the code in the shared RAM of an IOP with a copy in system memory
- * and return 0 on match or the first nonmatching system memory address on
- * failure.
- */
-
-__u8 *iop_compare_code(uint iop_num, __u8 *code_start,
-		       uint code_len, __u16 shared_ram_start)
-{
-	if ((iop_num >= NUM_IOPS) || !iop_base[iop_num]) return code_start;
-
-	iop_loadaddr(iop_base[iop_num], shared_ram_start);
-
-	while (code_len--) {
-		if (*code_start != iop_base[iop_num]->ram_data) {
-			return code_start;
-		}
-		code_start++;
-	}
-	return (__u8 *) 0;
-}
-
-/*
- * Handle an ISM IOP interrupt
- */
-
-irqreturn_t iop_ism_irq(int irq, void *dev_id)
-{
-	uint iop_num = (uint) dev_id;
-	volatile struct mac_iop *iop = iop_base[iop_num];
-	int i,state;
-
-#ifdef DEBUG_IOP
-	printk("iop_ism_irq: status = %02X\n", (uint) iop->status_ctrl);
-#endif
-
-	/* INT0 indicates a state change on an outgoing message channel */
-
-	if (iop->status_ctrl & IOP_INT0) {
-		iop->status_ctrl = IOP_INT0 | IOP_RUN | IOP_AUTOINC;
-#ifdef DEBUG_IOP
-		printk("iop_ism_irq: new status = %02X, send states",
-			(uint) iop->status_ctrl);
-#endif
-		for (i = 0 ; i < NUM_IOP_CHAN  ; i++) {
-			state = iop_readb(iop, IOP_ADDR_SEND_STATE + i);
-#ifdef DEBUG_IOP
-			printk(" %02X", state);
-#endif
-			if (state == IOP_MSG_COMPLETE) {
-				iop_handle_send(iop_num, i);
-			}
-		}
-#ifdef DEBUG_IOP
-		printk("\n");
-#endif
-	}
-
-	if (iop->status_ctrl & IOP_INT1) {	/* INT1 for incoming msgs */
-		iop->status_ctrl = IOP_INT1 | IOP_RUN | IOP_AUTOINC;
-#ifdef DEBUG_IOP
-		printk("iop_ism_irq: new status = %02X, recv states",
-			(uint) iop->status_ctrl);
-#endif
-		for (i = 0 ; i < NUM_IOP_CHAN ; i++) {
-			state = iop_readb(iop, IOP_ADDR_RECV_STATE + i);
-#ifdef DEBUG_IOP
-			printk(" %02X", state);
-#endif
-			if (state == IOP_MSG_NEW) {
-				iop_handle_recv(iop_num, i);
-			}
-		}
-#ifdef DEBUG_IOP
-		printk("\n");
-#endif
-	}
-	return IRQ_HANDLED;
-}
diff --git a/ANDROID_3.4.5/arch/m68k/mac/mac_penguin.S b/ANDROID_3.4.5/arch/m68k/mac/mac_penguin.S
deleted file mode 100644
index b3ce30b6..00000000
--- a/ANDROID_3.4.5/arch/m68k/mac/mac_penguin.S
+++ /dev/null
@@ -1,75 +0,0 @@
-.byte \
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,\
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0F,0xFF,0xFF,0xFF,0xFF,0xF0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,\
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0F,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xF0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,\
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,\
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0F,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xF0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,\
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x00,0xFF,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,\
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x0F,0xFF,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,\
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xF0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,\
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xF0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,\
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0F,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,\
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0F,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,\
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0F,0xFF,0xF0,0x0F,0xFF,0xFF,0xF0,0x00,0x0F,0xFF,0xFF,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,\
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0F,0xFF,0x00,0x00,0xFF,0xFF,0x00,0x00,0x00,0xFF,0xFF,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,\
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0F,0xFF,0x00,0x00,0xFF,0xFF,0x00,0x00,0x00,0xFF,0xFF,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,\
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xF0,0xFF,0xF0,0xFF,0xFF,0x0F,0xF0,0xF0,0x0F,0xFF,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,\
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xF0,0xFF,0x00,0xFF,0xFF,0x0F,0xFF,0x00,0x0F,0xFF,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,\
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xF0,0xFF,0xF0,0x0F,0xFF,0x0F,0xFF,0xF0,0x0F,0xFF,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,\
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0x0F,0xFF,0x00,0x0F,0x0F,0xFF,0xF0,0x0F,0xFF,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,\
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0x0F,0x00,0x00,0x00,0x00,0x0F,0xFF,0xFF,0xFF,0xFF,0xF0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,\
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0xFF,0xFF,0xF0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,\
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xF0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0F,0xFF,0xFF,0xF0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,\
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xF0,0x00,0x00,0x00,0x00,0x00,0x00,0xF0,0x0F,0xFF,0xFF,0xF0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,\
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0xF0,0x00,0x00,0x00,0x00,0xFF,0x00,0xFF,0xF0,0xFF,0xF0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,\
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0xFF,0x00,0x00,0x0F,0xF0,0x00,0x00,0xFF,0xF0,0x0F,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,\
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0xFF,0xFF,0xFF,0xF0,0x00,0x0F,0xF0,0xFF,0xFF,0x00,0xFF,0xF0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,\
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0xFF,0x00,0x00,0x00,0xFF,0xF0,0x00,0x0F,0xFF,0xF0,0xFF,0xF0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,\
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0F,0xFF,0x0F,0xFF,0x00,0xFF,0xF0,0x00,0x00,0x0F,0xFF,0xFF,0xFF,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,\
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0F,0xF0,0x00,0xFF,0xFF,0xFF,0x00,0x00,0x00,0x00,0xFF,0xFF,0xFF,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,\
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0xF0,0x00,0x0F,0xFF,0xF0,0x00,0x00,0x00,0x00,0x0F,0xFF,0xFF,0xFF,0xF0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,\
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0F,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0F,0xFF,0xFF,0xFF,0xF0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,\
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0F,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0F,0xFF,0xFF,0xFF,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,\
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0xF0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0xFF,0xFF,0xFF,0xF0,0x00,0x00,0x00,0x00,0x00,0x00,\
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0F,0xFF,0xF0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0xF0,0xFF,0xFF,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,\
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0xFF,0xF0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0xFF,0x0F,0xFF,0xFF,0xF0,0x00,0x00,0x00,0x00,0x00,\
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0F,0xFF,0xFF,0xF0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0F,0xFF,0xF0,0xFF,0xFF,0xF0,0x00,0x00,0x00,0x00,0x00,\
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0F,0xFF,0xFF,0xF0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0xFF,0xFF,0xFF,0xFF,0x00,0x00,0x00,0x00,0x00,\
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0x0F,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0xFF,0x0F,0xFF,0xFF,0xF0,0x00,0x00,0x00,0x00,\
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0xFF,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0F,0xFF,0xFF,0xFF,0xFF,0xF0,0x00,0x00,0x00,0x00,\
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0xFF,0xF0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0F,0xFF,0xF0,0xFF,0xFF,0xFF,0x00,0x00,0x00,0x00,\
-0x00,0x00,0x00,0x00,0x00,0x00,0x0F,0xFF,0xFF,0xF0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0F,0xFF,0xF0,0xFF,0xFF,0xFF,0x00,0x00,0x00,0x00,\
-0x00,0x00,0x00,0x00,0x00,0x00,0x0F,0xFF,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0xFF,0x0F,0xFF,0xFF,0x00,0x00,0x00,0x00,\
-0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0xFF,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0xFF,0x0F,0xFF,0xFF,0xF0,0x00,0x00,0x00,\
-0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0xFF,0xF0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0xFF,0x0F,0xFF,0xFF,0xF0,0x00,0x00,0x00,\
-0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0xFF,0xF0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0xFF,0x0F,0xFF,0xFF,0xF0,0x00,0x00,0x00,\
-0x00,0x00,0x00,0x00,0x00,0x0F,0xF0,0xFF,0xF0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x00,0x00,0x00,\
-0x00,0x00,0x00,0x00,0x00,0x0F,0xF0,0xFF,0xF0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x00,0x00,0x00,\
-0x00,0x00,0x00,0x00,0x00,0xFF,0xF0,0xFF,0xF0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0xFF,0x0F,0xFF,0xFF,0xFF,0x00,0x00,0x00,\
-0x00,0x00,0x00,0x00,0x0F,0xFF,0xF0,0xFF,0xF0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0xFF,0x0F,0xFF,0xFF,0xFF,0x00,0x00,0x00,\
-0x00,0x00,0x00,0x00,0x0F,0xFF,0xF0,0xFF,0xF0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0xFF,0x0F,0xFF,0xFF,0xFF,0x00,0x00,0x00,\
-0x00,0x00,0x00,0x00,0x0F,0xFF,0xFF,0x0F,0xF0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0xFF,0xFF,0x00,0x00,0x00,\
-0x00,0x00,0x00,0x00,0x0F,0xFF,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0F,0xFF,0xFF,0xFF,0xFF,0xFF,0x00,0x00,0x00,\
-0x00,0x00,0x00,0x00,0x0F,0xF0,0xFF,0xF0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x00,0x00,0x00,\
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x00,0x00,0x00,\
-0x00,0x00,0x00,0x00,0xF0,0x00,0x00,0x0F,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0F,0xF0,0xFF,0xFF,0xFF,0xFF,0xFF,0x00,0x00,0x00,0x00,\
-0x00,0x00,0x00,0x00,0xF0,0x00,0x00,0x00,0xFF,0xF0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0F,0x00,0x0F,0xFF,0xFF,0xFF,0xF0,0x00,0x00,0x00,0x00,\
-0x00,0x00,0x00,0x00,0xF0,0x00,0x00,0x00,0xFF,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0F,0x00,0x0F,0xFF,0xFF,0xFF,0x00,0x00,0xF0,0x00,0x00,\
-0x00,0x00,0x00,0xFF,0x00,0x00,0x00,0x00,0x0F,0xFF,0xF0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0F,0x00,0x00,0xFF,0xFF,0xF0,0x00,0x00,0xF0,0x00,0x00,\
-0x00,0xFF,0xFF,0xFF,0x00,0x00,0x00,0x00,0x00,0xFF,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xF0,0x00,0x00,\
-0x0F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0xFF,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0x00,0x00,\
-0x0F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0F,0xFF,0xFF,0xF0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0x00,0x00,\
-0x0F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0xFF,0xF0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0F,0xF0,0x00,\
-0x0F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0xFF,0xF0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0xF0,\
-0x0F,0xF0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0F,0xFF,0xF0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0F,0x0F,0xF0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0F,\
-0x0F,0xF0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0x0F,0xF0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,\
-0x0F,0xF0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xF0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0F,0xFF,0x0F,0xF0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,\
-0x0F,0xF0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0F,0x0F,0xF0,0x00,0x00,0x00,0x00,0x0F,0xFF,0xFF,0x0F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,\
-0x0F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0F,0xF0,0xFF,0xF0,0x00,0xFF,0xFF,0xFF,0xFF,0xFF,0x0F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0x00,\
-0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xF0,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x0F,0xFF,0x00,0x00,\
-0x0F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xF0,0xFF,0x00,0x00,0x00,0x00,0x00,0x0F,0xFF,0x00,0x00,0x00,\
-0x0F,0xFF,0xF0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0F,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xF0,0xFF,0x00,0x00,0x00,0x00,0x00,0xFF,0x00,0x00,0x00,0x00,\
-0x00,0x00,0x0F,0xFF,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x0F,0xF0,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xF0,0x00,0x00,0x00,0xFF,0xF0,0x00,0x00,0x00,0x00,\
-0x00,0x00,0x00,0x00,0x0F,0xFF,0xFF,0x00,0x00,0x00,0x00,0xFF,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0xF0,0x00,0x00,0x0F,0xFF,0x00,0x00,0x00,0x00,0x00,\
-0x00,0x00,0x00,0x00,0x00,0x00,0x0F,0xFF,0xFF,0x00,0x0F,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0xFF,0xFF,0xFF,0xFF,0xF0,0x00,0x00,0x00,0x00,0x00,\
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0F,0xFF,0xFF,0xFF,0xF0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0F,0xFF,0xFF,0xFF,0xFF,0x00,0x00,0x00,0x00,0x00,0x00
diff --git a/ANDROID_3.4.5/arch/m68k/mac/macboing.c b/ANDROID_3.4.5/arch/m68k/mac/macboing.c
deleted file mode 100644
index ffaa1f64..00000000
--- a/ANDROID_3.4.5/arch/m68k/mac/macboing.c
+++ /dev/null
@@ -1,309 +0,0 @@
-/*
- *	Mac bong noise generator. Note - we ought to put a boingy noise
- *	here 8)
- *
- *	----------------------------------------------------------------------
- *	16.11.98:
- *	rewrote some functions, added support for Enhanced ASC (Quadras)
- *	after the NetBSD asc.c console bell patch by Colin Wood/Frederick Bruck
- *	Juergen Mellinger (juergen.mellinger@t-online.de)
- */
-
-#include <linux/sched.h>
-#include <linux/timer.h>
-
-#include <asm/macintosh.h>
-#include <asm/mac_asc.h>
-
-static int mac_asc_inited;
-/*
- * dumb triangular wave table
- */
-static __u8 mac_asc_wave_tab[ 0x800 ];
-
-/*
- * Alan's original sine table; needs interpolating to 0x800
- * (hint: interpolate or hardwire [0 -> Pi/2[, it's symmetric)
- */
-static const signed char sine_data[] = {
-	0,  39,  75,  103,  121,  127,  121,  103,  75,  39,
-	0, -39, -75, -103, -121, -127, -121, -103, -75, -39
-};
-
-/*
- * where the ASC hides ...
- */
-static volatile __u8* mac_asc_regs = ( void* )0x50F14000;
-
-/*
- * sample rate; is this a good default value?
- */
-static unsigned long mac_asc_samplespersec = 11050;
-static int mac_bell_duration;
-static unsigned long mac_bell_phase; /* 0..2*Pi -> 0..0x800 (wavetable size) */
-static unsigned long mac_bell_phasepersample;
-
-/*
- * some function protos
- */
-static void mac_init_asc( void );
-static void mac_nosound( unsigned long );
-static void mac_quadra_start_bell( unsigned int, unsigned int, unsigned int );
-static void mac_quadra_ring_bell( unsigned long );
-static void mac_av_start_bell( unsigned int, unsigned int, unsigned int );
-static void ( *mac_special_bell )( unsigned int, unsigned int, unsigned int );
-
-/*
- * our timer to start/continue/stop the bell
- */
-static DEFINE_TIMER(mac_sound_timer, mac_nosound, 0, 0);
-
-/*
- * Sort of initialize the sound chip (called from mac_mksound on the first
- * beep).
- */
-static void mac_init_asc( void )
-{
-	int i;
-
-	/*
-	 * do some machine specific initialization
-	 * BTW:
-	 * the NetBSD Quadra patch identifies the Enhanced Apple Sound Chip via
-	 *	mac_asc_regs[ 0x800 ] & 0xF0 != 0
-	 * this makes no sense here, because we have to set the default sample
-	 * rate anyway if we want correct frequencies
-	 */
-	switch ( macintosh_config->ident )
-	{
-		case MAC_MODEL_IIFX:
-			/*
-			 * The IIfx is always special ...
-			 */
-			mac_asc_regs = ( void* )0x50010000;
-			break;
-			/*
-			 * not sure about how correct this list is
-			 * machines with the EASC enhanced apple sound chip
-			 */
-		case MAC_MODEL_Q630:
-		case MAC_MODEL_P475:
-			mac_special_bell = mac_quadra_start_bell;
-			mac_asc_samplespersec = 22150;
-			break;
-		case MAC_MODEL_C660:
-		case MAC_MODEL_Q840:
-			/*
-			 * The Quadra 660AV and 840AV use the "Singer" custom ASIC for sound I/O.
-			 * It appears to be similar to the "AWACS" custom ASIC in the Power Mac
-			 * [678]100.  Because Singer and AWACS may have a similar hardware
-			 * interface, this would imply that the code in drivers/sound/dmasound.c
-			 * for AWACS could be used as a basis for Singer support.  All we have to
-			 * do is figure out how to do DMA on the 660AV/840AV through the PSC and
-			 * figure out where the Singer hardware sits in memory. (I'd look in the
-			 * vicinity of the AWACS location in a Power Mac [678]100 first, or the
-			 * current location of the Apple Sound Chip--ASC--in other Macs.)  The
-			 * Power Mac [678]100 info can be found in MkLinux Mach kernel sources.
-			 *
-			 * Quoted from Apple's Tech Info Library, article number 16405:
-			 *   "Among desktop Macintosh computers, only the 660AV, 840AV, and Power
-			 *   Macintosh models have 16-bit audio input and output capability
-			 *   because of the AT&T DSP3210 hardware circuitry and the 16-bit Singer
-			 *   codec circuitry in the AVs.  The Audio Waveform Amplifier and
-			 *   Converter (AWAC) chip in the Power Macintosh performs the same
-			 *   16-bit I/O functionality.  The PowerBook 500 series computers
-			 *   support 16-bit stereo output, but only mono input."
-			 *
-			 *   Technical Information Library (TIL) article number 16405. 
-			 *   http://support.apple.com/kb/TA32601 
-			 *
-			 * --David Kilzer
-			 */
-			mac_special_bell = mac_av_start_bell;
-			break;
-		case MAC_MODEL_Q650:
-		case MAC_MODEL_Q700:
-		case MAC_MODEL_Q800:
-		case MAC_MODEL_Q900:
-		case MAC_MODEL_Q950:
-			/*
-			 * Currently not implemented!
-			 */
-			mac_special_bell = NULL;
-			break;
-		default:
-			/*
-			 * Every switch needs a default
-			 */
-			mac_special_bell = NULL;
-			break;
-	}
-
-	/*
-	 * init the wave table with a simple triangular wave
-	 * A sine wave would sure be nicer here ...
-	 */
-	for ( i = 0; i < 0x400; i++ )
-	{
-		mac_asc_wave_tab[ i ] = i / 4;
-		mac_asc_wave_tab[ i + 0x400 ] = 0xFF - i / 4;
-	}
-	mac_asc_inited = 1;
-}
-
-/*
- * Called to make noise; current single entry to the boing driver.
- * Does the job for simple ASC, calls other routines else.
- * XXX Fixme:
- * Should be split into asc_mksound, easc_mksound, av_mksound and
- * function pointer set in mac_init_asc which would be called at
- * init time.
- * _This_ is rather ugly ...
- */
-void mac_mksound( unsigned int freq, unsigned int length )
-{
-	__u32 cfreq = ( freq << 5 ) / 468;
-	unsigned long flags;
-	int i;
-
-	if ( mac_special_bell == NULL )
-	{
-		/* Do nothing */
-		return;
-	}
-
-	if ( !mac_asc_inited )
-		mac_init_asc();
-
-	if ( mac_special_bell )
-	{
-		mac_special_bell( freq, length, 128 );
-		return;
-	}
-
-	if ( freq < 20 || freq > 20000 || length == 0 )
-	{
-		mac_nosound( 0 );
-		return;
-	}
-
-	local_irq_save(flags);
-
-	del_timer( &mac_sound_timer );
-
-	for ( i = 0; i < 0x800; i++ )
-		mac_asc_regs[ i ] = 0;
-	for ( i = 0; i < 0x800; i++ )
-		mac_asc_regs[ i ] = mac_asc_wave_tab[ i ];
-
-	for ( i = 0; i < 8; i++ )
-		*( __u32* )( ( __u32 )mac_asc_regs + ASC_CONTROL + 0x814 + 8 * i ) = cfreq;
-
-	mac_asc_regs[ 0x807 ] = 0;
-	mac_asc_regs[ ASC_VOLUME ] = 128;
-	mac_asc_regs[ 0x805 ] = 0;
-	mac_asc_regs[ 0x80F ] = 0;
-	mac_asc_regs[ ASC_MODE ] = ASC_MODE_SAMPLE;
-	mac_asc_regs[ ASC_ENABLE ] = ASC_ENABLE_SAMPLE;
-
-	mac_sound_timer.expires = jiffies + length;
-	add_timer( &mac_sound_timer );
-
-	local_irq_restore(flags);
-}
-
-/*
- * regular ASC: stop whining ..
- */
-static void mac_nosound( unsigned long ignored )
-{
-	mac_asc_regs[ ASC_ENABLE ] = 0;
-}
-
-/*
- * EASC entry; init EASC, don't load wavetable, schedule 'start whining'.
- */
-static void mac_quadra_start_bell( unsigned int freq, unsigned int length, unsigned int volume )
-{
-	unsigned long flags;
-
-	/* if the bell is already ringing, ring longer */
-	if ( mac_bell_duration > 0 )
-	{
-		mac_bell_duration += length;
-		return;
-	}
-
-	mac_bell_duration = length;
-	mac_bell_phase = 0;
-	mac_bell_phasepersample = ( freq * sizeof( mac_asc_wave_tab ) ) / mac_asc_samplespersec;
-	/* this is reasonably big for small frequencies */
-
-	local_irq_save(flags);
-
-	/* set the volume */
-	mac_asc_regs[ 0x806 ] = volume;
-
-	/* set up the ASC registers */
-	if ( mac_asc_regs[ 0x801 ] != 1 )
-	{
-		/* select mono mode */
-		mac_asc_regs[ 0x807 ] = 0;
-		/* select sampled sound mode */
-		mac_asc_regs[ 0x802 ] = 0;
-		/* ??? */
-		mac_asc_regs[ 0x801 ] = 1;
-		mac_asc_regs[ 0x803 ] |= 0x80;
-		mac_asc_regs[ 0x803 ] &= 0x7F;
-	}
-
-	mac_sound_timer.function = mac_quadra_ring_bell;
-	mac_sound_timer.expires = jiffies + 1;
-	add_timer( &mac_sound_timer );
-
-	local_irq_restore(flags);
-}
-
-/*
- * EASC 'start/continue whining'; I'm not sure why the above function didn't
- * already load the wave table, or at least call this one...
- * This piece keeps reloading the wave table until done.
- */
-static void mac_quadra_ring_bell( unsigned long ignored )
-{
-	int	i, count = mac_asc_samplespersec / HZ;
-	unsigned long flags;
-
-	/*
-	 * we neither want a sound buffer overflow nor underflow, so we need to match
-	 * the number of samples per timer interrupt as exactly as possible.
-	 * using the asc interrupt will give better results in the future
-	 * ...and the possibility to use a real sample (a boingy noise, maybe...)
-	 */
-
-	local_irq_save(flags);
-
-	del_timer( &mac_sound_timer );
-
-	if ( mac_bell_duration-- > 0 )
-	{
-		for ( i = 0; i < count; i++ )
-		{
-			mac_bell_phase += mac_bell_phasepersample;
-			mac_asc_regs[ 0 ] = mac_asc_wave_tab[ mac_bell_phase & ( sizeof( mac_asc_wave_tab ) - 1 ) ];
-		}
-		mac_sound_timer.expires = jiffies + 1;
-		add_timer( &mac_sound_timer );
-	}
-	else
-		mac_asc_regs[ 0x801 ] = 0;
-
-	local_irq_restore(flags);
-}
-
-/*
- * AV code - please fill in.
- */
-static void mac_av_start_bell( unsigned int freq, unsigned int length, unsigned int volume )
-{
-}
diff --git a/ANDROID_3.4.5/arch/m68k/mac/macints.c b/ANDROID_3.4.5/arch/m68k/mac/macints.c
deleted file mode 100644
index 5c1a6b2f..00000000
--- a/ANDROID_3.4.5/arch/m68k/mac/macints.c
+++ /dev/null
@@ -1,340 +0,0 @@
-/*
- *	Macintosh interrupts
- *
- * General design:
- * In contrary to the Amiga and Atari platforms, the Mac hardware seems to
- * exclusively use the autovector interrupts (the 'generic level0-level7'
- * interrupts with exception vectors 0x19-0x1f). The following interrupt levels
- * are used:
- *	1	- VIA1
- *		  - slot 0: one second interrupt (CA2)
- *		  - slot 1: VBlank (CA1)
- *		  - slot 2: ADB data ready (SR full)
- *		  - slot 3: ADB data  (CB2)
- *		  - slot 4: ADB clock (CB1)
- *		  - slot 5: timer 2
- *		  - slot 6: timer 1
- *		  - slot 7: status of IRQ; signals 'any enabled int.'
- *
- *	2	- VIA2 or RBV
- *		  - slot 0: SCSI DRQ (CA2)
- *		  - slot 1: NUBUS IRQ (CA1) need to read port A to find which
- *		  - slot 2: /EXP IRQ (only on IIci)
- *		  - slot 3: SCSI IRQ (CB2)
- *		  - slot 4: ASC IRQ (CB1)
- *		  - slot 5: timer 2 (not on IIci)
- *		  - slot 6: timer 1 (not on IIci)
- *		  - slot 7: status of IRQ; signals 'any enabled int.'
- *
- * Levels 3-6 vary by machine type. For VIA or RBV Macintoshes:
- *
- *	3	- unused (?)
- *
- *	4	- SCC
- *
- *	5	- unused (?)
- *		  [serial errors or special conditions seem to raise level 6
- *		  interrupts on some models (LC4xx?)]
- *
- *	6	- off switch (?)
- *
- * Machines with Quadra-like VIA hardware, except PSC and PMU machines, support
- * an alternate interrupt mapping, as used by A/UX. It spreads ethernet and
- * sound out to their own autovector IRQs and gives VIA1 a higher priority:
- *
- *	1	- unused (?)
- *
- *	3	- on-board SONIC
- *
- *	5	- Apple Sound Chip (ASC)
- *
- *	6	- VIA1
- *
- * For OSS Macintoshes (IIfx only), we apply an interrupt mapping similar to
- * the Quadra (A/UX) mapping:
- *
- *	1	- ISM IOP (ADB)
- *
- *	2	- SCSI
- *
- *	3	- NuBus
- *
- *	4	- SCC IOP
- *
- *	6	- VIA1
- *
- * For PSC Macintoshes (660AV, 840AV):
- *
- *	3	- PSC level 3
- *		  - slot 0: MACE
- *
- *	4	- PSC level 4
- *		  - slot 1: SCC channel A interrupt
- *		  - slot 2: SCC channel B interrupt
- *		  - slot 3: MACE DMA
- *
- *	5	- PSC level 5
- *
- *	6	- PSC level 6
- *
- * Finally we have good 'ole level 7, the non-maskable interrupt:
- *
- *	7	- NMI (programmer's switch on the back of some Macs)
- *		  Also RAM parity error on models which support it (IIc, IIfx?)
- *
- * The current interrupt logic looks something like this:
- *
- * - We install dispatchers for the autovector interrupts (1-7). These
- *   dispatchers are responsible for querying the hardware (the
- *   VIA/RBV/OSS/PSC chips) to determine the actual interrupt source. Using
- *   this information a machspec interrupt number is generated by placing the
- *   index of the interrupt hardware into the low three bits and the original
- *   autovector interrupt number in the upper 5 bits. The handlers for the
- *   resulting machspec interrupt are then called.
- *
- * - Nubus is a special case because its interrupts are hidden behind two
- *   layers of hardware. Nubus interrupts come in as index 1 on VIA #2,
- *   which translates to IRQ number 17. In this spot we install _another_
- *   dispatcher. This dispatcher finds the interrupting slot number (9-F) and
- *   then forms a new machspec interrupt number as above with the slot number
- *   minus 9 in the low three bits and the pseudo-level 7 in the upper five
- *   bits.  The handlers for this new machspec interrupt number are then
- *   called. This puts Nubus interrupts into the range 56-62.
- *
- * - The Baboon interrupts (used on some PowerBooks) are an even more special
- *   case. They're hidden behind the Nubus slot $C interrupt thus adding a
- *   third layer of indirection. Why oh why did the Apple engineers do that?
- *
- */
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/delay.h>
-
-#include <asm/irq.h>
-#include <asm/macintosh.h>
-#include <asm/macints.h>
-#include <asm/mac_via.h>
-#include <asm/mac_psc.h>
-#include <asm/mac_oss.h>
-#include <asm/mac_iop.h>
-#include <asm/mac_baboon.h>
-#include <asm/hwtest.h>
-#include <asm/irq_regs.h>
-
-#define SHUTUP_SONIC
-
-/*
- * console_loglevel determines NMI handler function
- */
-
-irqreturn_t mac_nmi_handler(int, void *);
-irqreturn_t mac_debug_handler(int, void *);
-
-/* #define DEBUG_MACINTS */
-
-static unsigned int mac_irq_startup(struct irq_data *);
-static void mac_irq_shutdown(struct irq_data *);
-
-static struct irq_chip mac_irq_chip = {
-	.name		= "mac",
-	.irq_enable	= mac_irq_enable,
-	.irq_disable	= mac_irq_disable,
-	.irq_startup	= mac_irq_startup,
-	.irq_shutdown	= mac_irq_shutdown,
-};
-
-void __init mac_init_IRQ(void)
-{
-#ifdef DEBUG_MACINTS
-	printk("mac_init_IRQ(): Setting things up...\n");
-#endif
-	m68k_setup_irq_controller(&mac_irq_chip, handle_simple_irq, IRQ_USER,
-				  NUM_MAC_SOURCES - IRQ_USER);
-	/* Make sure the SONIC interrupt is cleared or things get ugly */
-#ifdef SHUTUP_SONIC
-	printk("Killing onboard sonic... ");
-	/* This address should hopefully be mapped already */
-	if (hwreg_present((void*)(0x50f0a000))) {
-		*(long *)(0x50f0a014) = 0x7fffL;
-		*(long *)(0x50f0a010) = 0L;
-	}
-	printk("Done.\n");
-#endif /* SHUTUP_SONIC */
-
-	/*
-	 * Now register the handlers for the master IRQ handlers
-	 * at levels 1-7. Most of the work is done elsewhere.
-	 */
-
-	if (oss_present)
-		oss_register_interrupts();
-	else
-		via_register_interrupts();
-	if (psc_present)
-		psc_register_interrupts();
-	if (baboon_present)
-		baboon_register_interrupts();
-	iop_register_interrupts();
-	if (request_irq(IRQ_AUTO_7, mac_nmi_handler, 0, "NMI",
-			mac_nmi_handler))
-		pr_err("Couldn't register NMI\n");
-#ifdef DEBUG_MACINTS
-	printk("mac_init_IRQ(): Done!\n");
-#endif
-}
-
-/*
- *  mac_irq_enable - enable an interrupt source
- * mac_irq_disable - disable an interrupt source
- *
- * These routines are just dispatchers to the VIA/OSS/PSC routines.
- */
-
-void mac_irq_enable(struct irq_data *data)
-{
-	int irq = data->irq;
-	int irq_src = IRQ_SRC(irq);
-
-	switch(irq_src) {
-	case 1:
-	case 2:
-	case 7:
-		if (oss_present)
-			oss_irq_enable(irq);
-		else
-			via_irq_enable(irq);
-		break;
-	case 3:
-	case 4:
-	case 5:
-	case 6:
-		if (psc_present)
-			psc_irq_enable(irq);
-		else if (oss_present)
-			oss_irq_enable(irq);
-		break;
-	case 8:
-		if (baboon_present)
-			baboon_irq_enable(irq);
-		break;
-	}
-}
-
-void mac_irq_disable(struct irq_data *data)
-{
-	int irq = data->irq;
-	int irq_src = IRQ_SRC(irq);
-
-	switch(irq_src) {
-	case 1:
-	case 2:
-	case 7:
-		if (oss_present)
-			oss_irq_disable(irq);
-		else
-			via_irq_disable(irq);
-		break;
-	case 3:
-	case 4:
-	case 5:
-	case 6:
-		if (psc_present)
-			psc_irq_disable(irq);
-		else if (oss_present)
-			oss_irq_disable(irq);
-		break;
-	case 8:
-		if (baboon_present)
-			baboon_irq_disable(irq);
-		break;
-	}
-}
-
-static unsigned int mac_irq_startup(struct irq_data *data)
-{
-	int irq = data->irq;
-
-	if (IRQ_SRC(irq) == 7 && !oss_present)
-		via_nubus_irq_startup(irq);
-	else
-		mac_irq_enable(data);
-
-	return 0;
-}
-
-static void mac_irq_shutdown(struct irq_data *data)
-{
-	int irq = data->irq;
-
-	if (IRQ_SRC(irq) == 7 && !oss_present)
-		via_nubus_irq_shutdown(irq);
-	else
-		mac_irq_disable(data);
-}
-
-static int num_debug[8];
-
-irqreturn_t mac_debug_handler(int irq, void *dev_id)
-{
-	if (num_debug[irq] < 10) {
-		printk("DEBUG: Unexpected IRQ %d\n", irq);
-		num_debug[irq]++;
-	}
-	return IRQ_HANDLED;
-}
-
-static int in_nmi;
-static volatile int nmi_hold;
-
-irqreturn_t mac_nmi_handler(int irq, void *dev_id)
-{
-	int i;
-	/*
-	 * generate debug output on NMI switch if 'debug' kernel option given
-	 * (only works with Penguin!)
-	 */
-
-	in_nmi++;
-	for (i=0; i<100; i++)
-		udelay(1000);
-
-	if (in_nmi == 1) {
-		nmi_hold = 1;
-		printk("... pausing, press NMI to resume ...");
-	} else {
-		printk(" ok!\n");
-		nmi_hold = 0;
-	}
-
-	barrier();
-
-	while (nmi_hold == 1)
-		udelay(1000);
-
-	if (console_loglevel >= 8) {
-#if 0
-		struct pt_regs *fp = get_irq_regs();
-		show_state();
-		printk("PC: %08lx\nSR: %04x  SP: %p\n", fp->pc, fp->sr, fp);
-		printk("d0: %08lx    d1: %08lx    d2: %08lx    d3: %08lx\n",
-		       fp->d0, fp->d1, fp->d2, fp->d3);
-		printk("d4: %08lx    d5: %08lx    a0: %08lx    a1: %08lx\n",
-		       fp->d4, fp->d5, fp->a0, fp->a1);
-
-		if (STACK_MAGIC != *(unsigned long *)current->kernel_stack_page)
-			printk("Corrupted stack page\n");
-		printk("Process %s (pid: %d, stackpage=%08lx)\n",
-			current->comm, current->pid, current->kernel_stack_page);
-		if (intr_count == 1)
-			dump_stack((struct frame *)fp);
-#else
-		/* printk("NMI "); */
-#endif
-	}
-	in_nmi--;
-	return IRQ_HANDLED;
-}
diff --git a/ANDROID_3.4.5/arch/m68k/mac/misc.c b/ANDROID_3.4.5/arch/m68k/mac/misc.c
deleted file mode 100644
index 5e085554..00000000
--- a/ANDROID_3.4.5/arch/m68k/mac/misc.c
+++ /dev/null
@@ -1,771 +0,0 @@
-/*
- * Miscellaneous Mac68K-specific stuff
- */
-
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <linux/miscdevice.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/sched.h>
-#include <linux/time.h>
-#include <linux/rtc.h>
-#include <linux/mm.h>
-
-#include <linux/adb.h>
-#include <linux/cuda.h>
-#include <linux/pmu.h>
-
-#include <asm/uaccess.h>
-#include <asm/io.h>
-#include <asm/rtc.h>
-#include <asm/segment.h>
-#include <asm/setup.h>
-#include <asm/macintosh.h>
-#include <asm/mac_via.h>
-#include <asm/mac_oss.h>
-
-#define BOOTINFO_COMPAT_1_0
-#include <asm/bootinfo.h>
-#include <asm/machdep.h>
-
-/* Offset between Unix time (1970-based) and Mac time (1904-based) */
-
-#define RTC_OFFSET 2082844800
-
-static void (*rom_reset)(void);
-
-#ifdef CONFIG_ADB_CUDA
-static long cuda_read_time(void)
-{
-	struct adb_request req;
-	long time;
-
-	if (cuda_request(&req, NULL, 2, CUDA_PACKET, CUDA_GET_TIME) < 0)
-		return 0;
-	while (!req.complete)
-		cuda_poll();
-
-	time = (req.reply[3] << 24) | (req.reply[4] << 16)
-		| (req.reply[5] << 8) | req.reply[6];
-	return time - RTC_OFFSET;
-}
-
-static void cuda_write_time(long data)
-{
-	struct adb_request req;
-	data += RTC_OFFSET;
-	if (cuda_request(&req, NULL, 6, CUDA_PACKET, CUDA_SET_TIME,
-			(data >> 24) & 0xFF, (data >> 16) & 0xFF,
-			(data >> 8) & 0xFF, data & 0xFF) < 0)
-		return;
-	while (!req.complete)
-		cuda_poll();
-}
-
-static __u8 cuda_read_pram(int offset)
-{
-	struct adb_request req;
-	if (cuda_request(&req, NULL, 4, CUDA_PACKET, CUDA_GET_PRAM,
-			(offset >> 8) & 0xFF, offset & 0xFF) < 0)
-		return 0;
-	while (!req.complete)
-		cuda_poll();
-	return req.reply[3];
-}
-
-static void cuda_write_pram(int offset, __u8 data)
-{
-	struct adb_request req;
-	if (cuda_request(&req, NULL, 5, CUDA_PACKET, CUDA_SET_PRAM,
-			(offset >> 8) & 0xFF, offset & 0xFF, data) < 0)
-		return;
-	while (!req.complete)
-		cuda_poll();
-}
-#else
-#define cuda_read_time() 0
-#define cuda_write_time(n)
-#define cuda_read_pram NULL
-#define cuda_write_pram NULL
-#endif
-
-#ifdef CONFIG_ADB_PMU68K
-static long pmu_read_time(void)
-{
-	struct adb_request req;
-	long time;
-
-	if (pmu_request(&req, NULL, 1, PMU_READ_RTC) < 0)
-		return 0;
-	while (!req.complete)
-		pmu_poll();
-
-	time = (req.reply[1] << 24) | (req.reply[2] << 16)
-		| (req.reply[3] << 8) | req.reply[4];
-	return time - RTC_OFFSET;
-}
-
-static void pmu_write_time(long data)
-{
-	struct adb_request req;
-	data += RTC_OFFSET;
-	if (pmu_request(&req, NULL, 5, PMU_SET_RTC,
-			(data >> 24) & 0xFF, (data >> 16) & 0xFF,
-			(data >> 8) & 0xFF, data & 0xFF) < 0)
-		return;
-	while (!req.complete)
-		pmu_poll();
-}
-
-static __u8 pmu_read_pram(int offset)
-{
-	struct adb_request req;
-	if (pmu_request(&req, NULL, 3, PMU_READ_NVRAM,
-			(offset >> 8) & 0xFF, offset & 0xFF) < 0)
-		return 0;
-	while (!req.complete)
-		pmu_poll();
-	return req.reply[3];
-}
-
-static void pmu_write_pram(int offset, __u8 data)
-{
-	struct adb_request req;
-	if (pmu_request(&req, NULL, 4, PMU_WRITE_NVRAM,
-			(offset >> 8) & 0xFF, offset & 0xFF, data) < 0)
-		return;
-	while (!req.complete)
-		pmu_poll();
-}
-#else
-#define pmu_read_time() 0
-#define pmu_write_time(n)
-#define pmu_read_pram NULL
-#define pmu_write_pram NULL
-#endif
-
-#if 0 /* def CONFIG_ADB_MACIISI */
-extern int maciisi_request(struct adb_request *req,
-			void (*done)(struct adb_request *), int nbytes, ...);
-
-static long maciisi_read_time(void)
-{
-	struct adb_request req;
-	long time;
-
-	if (maciisi_request(&req, NULL, 2, CUDA_PACKET, CUDA_GET_TIME))
-		return 0;
-
-	time = (req.reply[3] << 24) | (req.reply[4] << 16)
-		| (req.reply[5] << 8) | req.reply[6];
-	return time - RTC_OFFSET;
-}
-
-static void maciisi_write_time(long data)
-{
-	struct adb_request req;
-	data += RTC_OFFSET;
-	maciisi_request(&req, NULL, 6, CUDA_PACKET, CUDA_SET_TIME,
-			(data >> 24) & 0xFF, (data >> 16) & 0xFF,
-			(data >> 8) & 0xFF, data & 0xFF);
-}
-
-static __u8 maciisi_read_pram(int offset)
-{
-	struct adb_request req;
-	if (maciisi_request(&req, NULL, 4, CUDA_PACKET, CUDA_GET_PRAM,
-			(offset >> 8) & 0xFF, offset & 0xFF))
-		return 0;
-	return req.reply[3];
-}
-
-static void maciisi_write_pram(int offset, __u8 data)
-{
-	struct adb_request req;
-	maciisi_request(&req, NULL, 5, CUDA_PACKET, CUDA_SET_PRAM,
-			(offset >> 8) & 0xFF, offset & 0xFF, data);
-}
-#else
-#define maciisi_read_time() 0
-#define maciisi_write_time(n)
-#define maciisi_read_pram NULL
-#define maciisi_write_pram NULL
-#endif
-
-/*
- * VIA PRAM/RTC access routines
- *
- * Must be called with interrupts disabled and
- * the RTC should be enabled.
- */
-
-static __u8 via_pram_readbyte(void)
-{
-	int	i,reg;
-	__u8	data;
-
-	reg = via1[vBufB] & ~VIA1B_vRTCClk;
-
-	/* Set the RTC data line to be an input. */
-
-	via1[vDirB] &= ~VIA1B_vRTCData;
-
-	/* The bits of the byte come out in MSB order */
-
-	data = 0;
-	for (i = 0 ; i < 8 ; i++) {
-		via1[vBufB] = reg;
-		via1[vBufB] = reg | VIA1B_vRTCClk;
-		data = (data << 1) | (via1[vBufB] & VIA1B_vRTCData);
-	}
-
-	/* Return RTC data line to output state */
-
-	via1[vDirB] |= VIA1B_vRTCData;
-
-	return data;
-}
-
-static void via_pram_writebyte(__u8 data)
-{
-	int	i,reg,bit;
-
-	reg = via1[vBufB] & ~(VIA1B_vRTCClk | VIA1B_vRTCData);
-
-	/* The bits of the byte go in in MSB order */
-
-	for (i = 0 ; i < 8 ; i++) {
-		bit = data & 0x80? 1 : 0;
-		data <<= 1;
-		via1[vBufB] = reg | bit;
-		via1[vBufB] = reg | bit | VIA1B_vRTCClk;
-	}
-}
-
-/*
- * Execute a VIA PRAM/RTC command. For read commands
- * data should point to a one-byte buffer for the
- * resulting data. For write commands it should point
- * to the data byte to for the command.
- *
- * This function disables all interrupts while running.
- */
-
-static void via_pram_command(int command, __u8 *data)
-{
-	unsigned long flags;
-	int	is_read;
-
-	local_irq_save(flags);
-
-	/* Enable the RTC and make sure the strobe line is high */
-
-	via1[vBufB] = (via1[vBufB] | VIA1B_vRTCClk) & ~VIA1B_vRTCEnb;
-
-	if (command & 0xFF00) {		/* extended (two-byte) command */
-		via_pram_writebyte((command & 0xFF00) >> 8);
-		via_pram_writebyte(command & 0xFF);
-		is_read = command & 0x8000;
-	} else {			/* one-byte command */
-		via_pram_writebyte(command);
-		is_read = command & 0x80;
-	}
-	if (is_read) {
-		*data = via_pram_readbyte();
-	} else {
-		via_pram_writebyte(*data);
-	}
-
-	/* All done, disable the RTC */
-
-	via1[vBufB] |= VIA1B_vRTCEnb;
-
-	local_irq_restore(flags);
-}
-
-static __u8 via_read_pram(int offset)
-{
-	return 0;
-}
-
-static void via_write_pram(int offset, __u8 data)
-{
-}
-
-/*
- * Return the current time in seconds since January 1, 1904.
- *
- * This only works on machines with the VIA-based PRAM/RTC, which
- * is basically any machine with Mac II-style ADB.
- */
-
-static long via_read_time(void)
-{
-	union {
-		__u8 cdata[4];
-		long idata;
-	} result, last_result;
-	int count = 1;
-
-	via_pram_command(0x81, &last_result.cdata[3]);
-	via_pram_command(0x85, &last_result.cdata[2]);
-	via_pram_command(0x89, &last_result.cdata[1]);
-	via_pram_command(0x8D, &last_result.cdata[0]);
-
-	/*
-	 * The NetBSD guys say to loop until you get the same reading
-	 * twice in a row.
-	 */
-
-	while (1) {
-		via_pram_command(0x81, &result.cdata[3]);
-		via_pram_command(0x85, &result.cdata[2]);
-		via_pram_command(0x89, &result.cdata[1]);
-		via_pram_command(0x8D, &result.cdata[0]);
-
-		if (result.idata == last_result.idata)
-			return result.idata - RTC_OFFSET;
-
-		if (++count > 10)
-			break;
-
-		last_result.idata = result.idata;
-	}
-
-	pr_err("via_read_time: failed to read a stable value; "
-	       "got 0x%08lx then 0x%08lx\n",
-	       last_result.idata, result.idata);
-
-	return 0;
-}
-
-/*
- * Set the current time to a number of seconds since January 1, 1904.
- *
- * This only works on machines with the VIA-based PRAM/RTC, which
- * is basically any machine with Mac II-style ADB.
- */
-
-static void via_write_time(long time)
-{
-	union {
-		__u8  cdata[4];
-		long  idata;
-	} data;
-	__u8	temp;
-
-	/* Clear the write protect bit */
-
-	temp = 0x55;
-	via_pram_command(0x35, &temp);
-
-	data.idata = time + RTC_OFFSET;
-	via_pram_command(0x01, &data.cdata[3]);
-	via_pram_command(0x05, &data.cdata[2]);
-	via_pram_command(0x09, &data.cdata[1]);
-	via_pram_command(0x0D, &data.cdata[0]);
-
-	/* Set the write protect bit */
-
-	temp = 0xD5;
-	via_pram_command(0x35, &temp);
-}
-
-static void via_shutdown(void)
-{
-	if (rbv_present) {
-		via2[rBufB] &= ~0x04;
-	} else {
-		/* Direction of vDirB is output */
-		via2[vDirB] |= 0x04;
-		/* Send a value of 0 on that line */
-		via2[vBufB] &= ~0x04;
-		mdelay(1000);
-	}
-}
-
-/*
- * FIXME: not sure how this is supposed to work exactly...
- */
-
-static void oss_shutdown(void)
-{
-	oss->rom_ctrl = OSS_POWEROFF;
-}
-
-#ifdef CONFIG_ADB_CUDA
-
-static void cuda_restart(void)
-{
-	struct adb_request req;
-	if (cuda_request(&req, NULL, 2, CUDA_PACKET, CUDA_RESET_SYSTEM) < 0)
-		return;
-	while (!req.complete)
-		cuda_poll();
-}
-
-static void cuda_shutdown(void)
-{
-	struct adb_request req;
-	if (cuda_request(&req, NULL, 2, CUDA_PACKET, CUDA_POWERDOWN) < 0)
-		return;
-	while (!req.complete)
-		cuda_poll();
-}
-
-#endif /* CONFIG_ADB_CUDA */
-
-#ifdef CONFIG_ADB_PMU68K
-
-void pmu_restart(void)
-{
-	struct adb_request req;
-	if (pmu_request(&req, NULL,
-			2, PMU_SET_INTR_MASK, PMU_INT_ADB|PMU_INT_TICK) < 0)
-		return;
-	while (!req.complete)
-		pmu_poll();
-	if (pmu_request(&req, NULL, 1, PMU_RESET) < 0)
-		return;
-	while (!req.complete)
-		pmu_poll();
-}
-
-void pmu_shutdown(void)
-{
-	struct adb_request req;
-	if (pmu_request(&req, NULL,
-			2, PMU_SET_INTR_MASK, PMU_INT_ADB|PMU_INT_TICK) < 0)
-		return;
-	while (!req.complete)
-		pmu_poll();
-	if (pmu_request(&req, NULL, 5, PMU_SHUTDOWN, 'M', 'A', 'T', 'T') < 0)
-		return;
-	while (!req.complete)
-		pmu_poll();
-}
-
-#endif
-
-/*
- *-------------------------------------------------------------------
- * Below this point are the generic routines; they'll dispatch to the
- * correct routine for the hardware on which we're running.
- *-------------------------------------------------------------------
- */
-
-void mac_pram_read(int offset, __u8 *buffer, int len)
-{
-	__u8 (*func)(int);
-	int i;
-
-	switch(macintosh_config->adb_type) {
-	case MAC_ADB_IISI:
-		func = maciisi_read_pram; break;
-	case MAC_ADB_PB1:
-	case MAC_ADB_PB2:
-		func = pmu_read_pram; break;
-	case MAC_ADB_CUDA:
-		func = cuda_read_pram; break;
-	default:
-		func = via_read_pram;
-	}
-	if (!func)
-		return;
-	for (i = 0 ; i < len ; i++) {
-		buffer[i] = (*func)(offset++);
-	}
-}
-
-void mac_pram_write(int offset, __u8 *buffer, int len)
-{
-	void (*func)(int, __u8);
-	int i;
-
-	switch(macintosh_config->adb_type) {
-	case MAC_ADB_IISI:
-		func = maciisi_write_pram; break;
-	case MAC_ADB_PB1:
-	case MAC_ADB_PB2:
-		func = pmu_write_pram; break;
-	case MAC_ADB_CUDA:
-		func = cuda_write_pram; break;
-	default:
-		func = via_write_pram;
-	}
-	if (!func)
-		return;
-	for (i = 0 ; i < len ; i++) {
-		(*func)(offset++, buffer[i]);
-	}
-}
-
-void mac_poweroff(void)
-{
-	/*
-	 * MAC_ADB_IISI may need to be moved up here if it doesn't actually
-	 * work using the ADB packet method.  --David Kilzer
-	 */
-
-	if (oss_present) {
-		oss_shutdown();
-	} else if (macintosh_config->adb_type == MAC_ADB_II) {
-		via_shutdown();
-#ifdef CONFIG_ADB_CUDA
-	} else if (macintosh_config->adb_type == MAC_ADB_CUDA) {
-		cuda_shutdown();
-#endif
-#ifdef CONFIG_ADB_PMU68K
-	} else if (macintosh_config->adb_type == MAC_ADB_PB1
-		|| macintosh_config->adb_type == MAC_ADB_PB2) {
-		pmu_shutdown();
-#endif
-	}
-	local_irq_enable();
-	printk("It is now safe to turn off your Macintosh.\n");
-	while(1);
-}
-
-void mac_reset(void)
-{
-	if (macintosh_config->adb_type == MAC_ADB_II) {
-		unsigned long flags;
-
-		/* need ROMBASE in booter */
-		/* indeed, plus need to MAP THE ROM !! */
-
-		if (mac_bi_data.rombase == 0)
-			mac_bi_data.rombase = 0x40800000;
-
-		/* works on some */
-		rom_reset = (void *) (mac_bi_data.rombase + 0xa);
-
-		if (macintosh_config->ident == MAC_MODEL_SE30) {
-			/*
-			 * MSch: Machines known to crash on ROM reset ...
-			 */
-		} else {
-			local_irq_save(flags);
-
-			rom_reset();
-
-			local_irq_restore(flags);
-		}
-#ifdef CONFIG_ADB_CUDA
-	} else if (macintosh_config->adb_type == MAC_ADB_CUDA) {
-		cuda_restart();
-#endif
-#ifdef CONFIG_ADB_PMU68K
-	} else if (macintosh_config->adb_type == MAC_ADB_PB1
-		|| macintosh_config->adb_type == MAC_ADB_PB2) {
-		pmu_restart();
-#endif
-	} else if (CPU_IS_030) {
-
-		/* 030-specific reset routine.  The idea is general, but the
-		 * specific registers to reset are '030-specific.  Until I
-		 * have a non-030 machine, I can't test anything else.
-		 *  -- C. Scott Ananian <cananian@alumni.princeton.edu>
-		 */
-
-		unsigned long rombase = 0x40000000;
-
-		/* make a 1-to-1 mapping, using the transparent tran. reg. */
-		unsigned long virt = (unsigned long) mac_reset;
-		unsigned long phys = virt_to_phys(mac_reset);
-		unsigned long addr = (phys&0xFF000000)|0x8777;
-		unsigned long offset = phys-virt;
-		local_irq_disable(); /* lets not screw this up, ok? */
-		__asm__ __volatile__(".chip 68030\n\t"
-				     "pmove %0,%/tt0\n\t"
-				     ".chip 68k"
-				     : : "m" (addr));
-		/* Now jump to physical address so we can disable MMU */
-		__asm__ __volatile__(
-                    ".chip 68030\n\t"
-		    "lea %/pc@(1f),%/a0\n\t"
-		    "addl %0,%/a0\n\t"/* fixup target address and stack ptr */
-		    "addl %0,%/sp\n\t"
-		    "pflusha\n\t"
-		    "jmp %/a0@\n\t" /* jump into physical memory */
-		    "0:.long 0\n\t" /* a constant zero. */
-		    /* OK.  Now reset everything and jump to reset vector. */
-		    "1:\n\t"
-		    "lea %/pc@(0b),%/a0\n\t"
-		    "pmove %/a0@, %/tc\n\t" /* disable mmu */
-		    "pmove %/a0@, %/tt0\n\t" /* disable tt0 */
-		    "pmove %/a0@, %/tt1\n\t" /* disable tt1 */
-		    "movel #0, %/a0\n\t"
-		    "movec %/a0, %/vbr\n\t" /* clear vector base register */
-		    "movec %/a0, %/cacr\n\t" /* disable caches */
-		    "movel #0x0808,%/a0\n\t"
-		    "movec %/a0, %/cacr\n\t" /* flush i&d caches */
-		    "movew #0x2700,%/sr\n\t" /* set up status register */
-		    "movel %1@(0x0),%/a0\n\t"/* load interrupt stack pointer */
-		    "movec %/a0, %/isp\n\t"
-		    "movel %1@(0x4),%/a0\n\t" /* load reset vector */
-		    "reset\n\t" /* reset external devices */
-		    "jmp %/a0@\n\t" /* jump to the reset vector */
-		    ".chip 68k"
-		    : : "r" (offset), "a" (rombase) : "a0");
-	}
-
-	/* should never get here */
-	local_irq_enable();
-	printk ("Restart failed.  Please restart manually.\n");
-	while(1);
-}
-
-/*
- * This function translates seconds since 1970 into a proper date.
- *
- * Algorithm cribbed from glibc2.1, __offtime().
- */
-#define SECS_PER_MINUTE (60)
-#define SECS_PER_HOUR  (SECS_PER_MINUTE * 60)
-#define SECS_PER_DAY   (SECS_PER_HOUR * 24)
-
-static void unmktime(unsigned long time, long offset,
-		     int *yearp, int *monp, int *dayp,
-		     int *hourp, int *minp, int *secp)
-{
-        /* How many days come before each month (0-12).  */
-	static const unsigned short int __mon_yday[2][13] =
-	{
-		/* Normal years.  */
-		{ 0, 31, 59, 90, 120, 151, 181, 212, 243, 273, 304, 334, 365 },
-		/* Leap years.  */
-		{ 0, 31, 60, 91, 121, 152, 182, 213, 244, 274, 305, 335, 366 }
-	};
-	long int days, rem, y, wday, yday;
-	const unsigned short int *ip;
-
-	days = time / SECS_PER_DAY;
-	rem = time % SECS_PER_DAY;
-	rem += offset;
-	while (rem < 0) {
-		rem += SECS_PER_DAY;
-		--days;
-	}
-	while (rem >= SECS_PER_DAY) {
-		rem -= SECS_PER_DAY;
-		++days;
-	}
-	*hourp = rem / SECS_PER_HOUR;
-	rem %= SECS_PER_HOUR;
-	*minp = rem / SECS_PER_MINUTE;
-	*secp = rem % SECS_PER_MINUTE;
-	/* January 1, 1970 was a Thursday. */
-	wday = (4 + days) % 7; /* Day in the week. Not currently used */
-	if (wday < 0) wday += 7;
-	y = 1970;
-
-#define DIV(a, b) ((a) / (b) - ((a) % (b) < 0))
-#define LEAPS_THRU_END_OF(y) (DIV (y, 4) - DIV (y, 100) + DIV (y, 400))
-#define __isleap(year)	\
-  ((year) % 4 == 0 && ((year) % 100 != 0 || (year) % 400 == 0))
-
-	while (days < 0 || days >= (__isleap (y) ? 366 : 365))
-	{
-		/* Guess a corrected year, assuming 365 days per year.  */
-		long int yg = y + days / 365 - (days % 365 < 0);
-
-		/* Adjust DAYS and Y to match the guessed year.  */
-		days -= ((yg - y) * 365
-			 + LEAPS_THRU_END_OF (yg - 1)
-			 - LEAPS_THRU_END_OF (y - 1));
-		y = yg;
-	}
-	*yearp = y - 1900;
-	yday = days; /* day in the year.  Not currently used. */
-	ip = __mon_yday[__isleap(y)];
-	for (y = 11; days < (long int) ip[y]; --y)
-		continue;
-	days -= ip[y];
-	*monp = y;
-	*dayp = days + 1; /* day in the month */
-	return;
-}
-
-/*
- * Read/write the hardware clock.
- */
-
-int mac_hwclk(int op, struct rtc_time *t)
-{
-	unsigned long now;
-
-	if (!op) { /* read */
-		switch (macintosh_config->adb_type) {
-		case MAC_ADB_II:
-		case MAC_ADB_IOP:
-			now = via_read_time();
-			break;
-		case MAC_ADB_IISI:
-			now = maciisi_read_time();
-			break;
-		case MAC_ADB_PB1:
-		case MAC_ADB_PB2:
-			now = pmu_read_time();
-			break;
-		case MAC_ADB_CUDA:
-			now = cuda_read_time();
-			break;
-		default:
-			now = 0;
-		}
-
-		t->tm_wday = 0;
-		unmktime(now, 0,
-			 &t->tm_year, &t->tm_mon, &t->tm_mday,
-			 &t->tm_hour, &t->tm_min, &t->tm_sec);
-#if 0
-		printk("mac_hwclk: read %04d-%02d-%-2d %02d:%02d:%02d\n",
-			t->tm_year + 1900, t->tm_mon + 1, t->tm_mday,
-			t->tm_hour, t->tm_min, t->tm_sec);
-#endif
-	} else { /* write */
-#if 0
-		printk("mac_hwclk: tried to write %04d-%02d-%-2d %02d:%02d:%02d\n",
-			t->tm_year + 1900, t->tm_mon + 1, t->tm_mday,
-			t->tm_hour, t->tm_min, t->tm_sec);
-#endif
-
-		now = mktime(t->tm_year + 1900, t->tm_mon + 1, t->tm_mday,
-			     t->tm_hour, t->tm_min, t->tm_sec);
-
-		switch (macintosh_config->adb_type) {
-		case MAC_ADB_II:
-		case MAC_ADB_IOP:
-			via_write_time(now);
-			break;
-		case MAC_ADB_CUDA:
-			cuda_write_time(now);
-			break;
-		case MAC_ADB_PB1:
-		case MAC_ADB_PB2:
-			pmu_write_time(now);
-			break;
-		case MAC_ADB_IISI:
-			maciisi_write_time(now);
-		}
-	}
-	return 0;
-}
-
-/*
- * Set minutes/seconds in the hardware clock
- */
-
-int mac_set_clock_mmss (unsigned long nowtime)
-{
-	struct rtc_time now;
-
-	mac_hwclk(0, &now);
-	now.tm_sec = nowtime % 60;
-	now.tm_min = (nowtime / 60) % 60;
-	mac_hwclk(1, &now);
-
-	return 0;
-}
diff --git a/ANDROID_3.4.5/arch/m68k/mac/oss.c b/ANDROID_3.4.5/arch/m68k/mac/oss.c
deleted file mode 100644
index 6c4c882c..00000000
--- a/ANDROID_3.4.5/arch/m68k/mac/oss.c
+++ /dev/null
@@ -1,228 +0,0 @@
-/*
- *	Operating System Services (OSS) chip handling
- *	Written by Joshua M. Thompson (funaho@jurai.org)
- *
- *
- *	This chip is used in the IIfx in place of VIA #2. It acts like a fancy
- *	VIA chip with prorammable interrupt levels.
- *
- * 990502 (jmt) - Major rewrite for new interrupt architecture as well as some
- *		  recent insights into OSS operational details.
- * 990610 (jmt) - Now taking full advantage of the OSS. Interrupts are mapped
- *		  to mostly match the A/UX interrupt scheme supported on the
- *		  VIA side. Also added support for enabling the ISM irq again
- *		  since we now have a functional IOP manager.
- */
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-
-#include <asm/bootinfo.h>
-#include <asm/macintosh.h>
-#include <asm/macints.h>
-#include <asm/mac_via.h>
-#include <asm/mac_oss.h>
-
-int oss_present;
-volatile struct mac_oss *oss;
-
-/*
- * Initialize the OSS
- *
- * The OSS "detection" code is actually in via_init() which is always called
- * before us. Thus we can count on oss_present being valid on entry.
- */
-
-void __init oss_init(void)
-{
-	int i;
-
-	if (!oss_present) return;
-
-	oss = (struct mac_oss *) OSS_BASE;
-
-	/* Disable all interrupts. Unlike a VIA it looks like we    */
-	/* do this by setting the source's interrupt level to zero. */
-
-	for (i = 0; i <= OSS_NUM_SOURCES; i++) {
-		oss->irq_level[i] = 0;
-	}
-}
-
-/*
- * Initialize OSS for Nubus access
- */
-
-void __init oss_nubus_init(void)
-{
-}
-
-/*
- * Handle miscellaneous OSS interrupts.
- */
-
-static void oss_irq(unsigned int irq, struct irq_desc *desc)
-{
-	int events = oss->irq_pending &
-	             (OSS_IP_IOPSCC | OSS_IP_SCSI | OSS_IP_IOPISM);
-
-#ifdef DEBUG_IRQS
-	if ((console_loglevel == 10) && !(events & OSS_IP_SCSI)) {
-		printk("oss_irq: irq %u events = 0x%04X\n", irq,
-			(int) oss->irq_pending);
-	}
-#endif
-
-	if (events & OSS_IP_IOPSCC) {
-		oss->irq_pending &= ~OSS_IP_IOPSCC;
-		generic_handle_irq(IRQ_MAC_SCC);
-	}
-
-	if (events & OSS_IP_SCSI) {
-		oss->irq_pending &= ~OSS_IP_SCSI;
-		generic_handle_irq(IRQ_MAC_SCSI);
-	}
-
-	if (events & OSS_IP_IOPISM) {
-		oss->irq_pending &= ~OSS_IP_IOPISM;
-		generic_handle_irq(IRQ_MAC_ADB);
-	}
-}
-
-/*
- * Nubus IRQ handler, OSS style
- *
- * Unlike the VIA/RBV this is on its own autovector interrupt level.
- */
-
-static void oss_nubus_irq(unsigned int irq, struct irq_desc *desc)
-{
-	int events, irq_bit, i;
-
-	events = oss->irq_pending & OSS_IP_NUBUS;
-	if (!events)
-		return;
-
-#ifdef DEBUG_NUBUS_INT
-	if (console_loglevel > 7) {
-		printk("oss_nubus_irq: events = 0x%04X\n", events);
-	}
-#endif
-	/* There are only six slots on the OSS, not seven */
-
-	i = 6;
-	irq_bit = 0x40;
-	do {
-		--i;
-		irq_bit >>= 1;
-		if (events & irq_bit) {
-			oss->irq_pending &= ~irq_bit;
-			generic_handle_irq(NUBUS_SOURCE_BASE + i);
-		}
-	} while(events & (irq_bit - 1));
-}
-
-/*
- * Register the OSS and NuBus interrupt dispatchers.
- *
- * This IRQ mapping is laid out with two things in mind: first, we try to keep
- * things on their own levels to avoid having to do double-dispatches. Second,
- * the levels match as closely as possible the alternate IRQ mapping mode (aka
- * "A/UX mode") available on some VIA machines.
- */
-
-#define OSS_IRQLEV_IOPISM    IRQ_AUTO_1
-#define OSS_IRQLEV_SCSI      IRQ_AUTO_2
-#define OSS_IRQLEV_NUBUS     IRQ_AUTO_3
-#define OSS_IRQLEV_IOPSCC    IRQ_AUTO_4
-#define OSS_IRQLEV_VIA1      IRQ_AUTO_6
-
-void __init oss_register_interrupts(void)
-{
-	irq_set_chained_handler(OSS_IRQLEV_IOPISM, oss_irq);
-	irq_set_chained_handler(OSS_IRQLEV_SCSI,   oss_irq);
-	irq_set_chained_handler(OSS_IRQLEV_NUBUS,  oss_nubus_irq);
-	irq_set_chained_handler(OSS_IRQLEV_IOPSCC, oss_irq);
-	irq_set_chained_handler(OSS_IRQLEV_VIA1,   via1_irq);
-
-	/* OSS_VIA1 gets enabled here because it has no machspec interrupt. */
-	oss->irq_level[OSS_VIA1] = IRQ_AUTO_6;
-}
-
-/*
- * Enable an OSS interrupt
- *
- * It looks messy but it's rather straightforward. The switch() statement
- * just maps the machspec interrupt numbers to the right OSS interrupt
- * source (if the OSS handles that interrupt) and then sets the interrupt
- * level for that source to nonzero, thus enabling the interrupt.
- */
-
-void oss_irq_enable(int irq) {
-#ifdef DEBUG_IRQUSE
-	printk("oss_irq_enable(%d)\n", irq);
-#endif
-	switch(irq) {
-		case IRQ_MAC_SCC:
-			oss->irq_level[OSS_IOPSCC] = OSS_IRQLEV_IOPSCC;
-			return;
-		case IRQ_MAC_ADB:
-			oss->irq_level[OSS_IOPISM] = OSS_IRQLEV_IOPISM;
-			return;
-		case IRQ_MAC_SCSI:
-			oss->irq_level[OSS_SCSI] = OSS_IRQLEV_SCSI;
-			return;
-		case IRQ_NUBUS_9:
-		case IRQ_NUBUS_A:
-		case IRQ_NUBUS_B:
-		case IRQ_NUBUS_C:
-		case IRQ_NUBUS_D:
-		case IRQ_NUBUS_E:
-			irq -= NUBUS_SOURCE_BASE;
-			oss->irq_level[irq] = OSS_IRQLEV_NUBUS;
-			return;
-	}
-
-	if (IRQ_SRC(irq) == 1)
-		via_irq_enable(irq);
-}
-
-/*
- * Disable an OSS interrupt
- *
- * Same as above except we set the source's interrupt level to zero,
- * to disable the interrupt.
- */
-
-void oss_irq_disable(int irq) {
-#ifdef DEBUG_IRQUSE
-	printk("oss_irq_disable(%d)\n", irq);
-#endif
-	switch(irq) {
-		case IRQ_MAC_SCC:
-			oss->irq_level[OSS_IOPSCC] = 0;
-			return;
-		case IRQ_MAC_ADB:
-			oss->irq_level[OSS_IOPISM] = 0;
-			return;
-		case IRQ_MAC_SCSI:
-			oss->irq_level[OSS_SCSI] = 0;
-			return;
-		case IRQ_NUBUS_9:
-		case IRQ_NUBUS_A:
-		case IRQ_NUBUS_B:
-		case IRQ_NUBUS_C:
-		case IRQ_NUBUS_D:
-		case IRQ_NUBUS_E:
-			irq -= NUBUS_SOURCE_BASE;
-			oss->irq_level[irq] = 0;
-			return;
-	}
-
-	if (IRQ_SRC(irq) == 1)
-		via_irq_disable(irq);
-}
diff --git a/ANDROID_3.4.5/arch/m68k/mac/psc.c b/ANDROID_3.4.5/arch/m68k/mac/psc.c
deleted file mode 100644
index 6f026fc3..00000000
--- a/ANDROID_3.4.5/arch/m68k/mac/psc.c
+++ /dev/null
@@ -1,182 +0,0 @@
-/*
- *	Apple Peripheral System Controller (PSC)
- *
- *	The PSC is used on the AV Macs to control IO functions not handled
- *	by the VIAs (Ethernet, DSP, SCC).
- *
- * TO DO:
- *
- * Try to figure out what's going on in pIFR5 and pIFR6. There seem to be
- * persisant interrupt conditions in those registers and I have no idea what
- * they are. Granted it doesn't affect since we're not enabling any interrupts
- * on those levels at the moment, but it would be nice to know. I have a feeling
- * they aren't actually interrupt lines but data lines (to the DSP?)
- */
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-
-#include <asm/traps.h>
-#include <asm/bootinfo.h>
-#include <asm/macintosh.h>
-#include <asm/macints.h>
-#include <asm/mac_psc.h>
-
-#define DEBUG_PSC
-
-int psc_present;
-volatile __u8 *psc;
-
-/*
- * Debugging dump, used in various places to see what's going on.
- */
-
-static void psc_debug_dump(void)
-{
-	int	i;
-
-	if (!psc_present) return;
-	for (i = 0x30 ; i < 0x70 ; i += 0x10) {
-		printk("PSC #%d:  IFR = 0x%02X IER = 0x%02X\n",
-			i >> 4,
-			(int) psc_read_byte(pIFRbase + i),
-			(int) psc_read_byte(pIERbase + i));
-	}
-}
-
-/*
- * Try to kill all DMA channels on the PSC. Not sure how this his
- * supposed to work; this is code lifted from macmace.c and then
- * expanded to cover what I think are the other 7 channels.
- */
-
-static void psc_dma_die_die_die(void)
-{
-	int i;
-
-	printk("Killing all PSC DMA channels...");
-	for (i = 0 ; i < 9 ; i++) {
-		psc_write_word(PSC_CTL_BASE + (i << 4), 0x8800);
-		psc_write_word(PSC_CTL_BASE + (i << 4), 0x1000);
-		psc_write_word(PSC_CMD_BASE + (i << 5), 0x1100);
-		psc_write_word(PSC_CMD_BASE + (i << 5) + 0x10, 0x1100);
-	}
-	printk("done!\n");
-}
-
-/*
- * Initialize the PSC. For now this just involves shutting down all
- * interrupt sources using the IERs.
- */
-
-void __init psc_init(void)
-{
-	int i;
-
-	if (macintosh_config->ident != MAC_MODEL_C660
-	 && macintosh_config->ident != MAC_MODEL_Q840)
-	{
-		psc = NULL;
-		psc_present = 0;
-		return;
-	}
-
-	/*
-	 * The PSC is always at the same spot, but using psc
-	 * keeps things consistent with the psc_xxxx functions.
-	 */
-
-	psc = (void *) PSC_BASE;
-	psc_present = 1;
-
-	printk("PSC detected at %p\n", psc);
-
-	psc_dma_die_die_die();
-
-#ifdef DEBUG_PSC
-	psc_debug_dump();
-#endif
-	/*
-	 * Mask and clear all possible interrupts
-	 */
-
-	for (i = 0x30 ; i < 0x70 ; i += 0x10) {
-		psc_write_byte(pIERbase + i, 0x0F);
-		psc_write_byte(pIFRbase + i, 0x0F);
-	}
-}
-
-/*
- * PSC interrupt handler. It's a lot like the VIA interrupt handler.
- */
-
-static void psc_irq(unsigned int irq, struct irq_desc *desc)
-{
-	unsigned int offset = (unsigned int)irq_desc_get_handler_data(desc);
-	int pIFR	= pIFRbase + offset;
-	int pIER	= pIERbase + offset;
-	int irq_num;
-	unsigned char irq_bit, events;
-
-#ifdef DEBUG_IRQS
-	printk("psc_irq: irq %u pIFR = 0x%02X pIER = 0x%02X\n",
-		irq, (int) psc_read_byte(pIFR), (int) psc_read_byte(pIER));
-#endif
-
-	events = psc_read_byte(pIFR) & psc_read_byte(pIER) & 0xF;
-	if (!events)
-		return;
-
-	irq_num = irq << 3;
-	irq_bit = 1;
-	do {
-		if (events & irq_bit) {
-			psc_write_byte(pIFR, irq_bit);
-			generic_handle_irq(irq_num);
-		}
-		irq_num++;
-		irq_bit <<= 1;
-	} while (events >= irq_bit);
-}
-
-/*
- * Register the PSC interrupt dispatchers for autovector interrupts 3-6.
- */
-
-void __init psc_register_interrupts(void)
-{
-	irq_set_chained_handler(IRQ_AUTO_3, psc_irq);
-	irq_set_handler_data(IRQ_AUTO_3, (void *)0x30);
-	irq_set_chained_handler(IRQ_AUTO_4, psc_irq);
-	irq_set_handler_data(IRQ_AUTO_4, (void *)0x40);
-	irq_set_chained_handler(IRQ_AUTO_5, psc_irq);
-	irq_set_handler_data(IRQ_AUTO_5, (void *)0x50);
-	irq_set_chained_handler(IRQ_AUTO_6, psc_irq);
-	irq_set_handler_data(IRQ_AUTO_6, (void *)0x60);
-}
-
-void psc_irq_enable(int irq) {
-	int irq_src	= IRQ_SRC(irq);
-	int irq_idx	= IRQ_IDX(irq);
-	int pIER	= pIERbase + (irq_src << 4);
-
-#ifdef DEBUG_IRQUSE
-	printk("psc_irq_enable(%d)\n", irq);
-#endif
-	psc_write_byte(pIER, (1 << irq_idx) | 0x80);
-}
-
-void psc_irq_disable(int irq) {
-	int irq_src	= IRQ_SRC(irq);
-	int irq_idx	= IRQ_IDX(irq);
-	int pIER	= pIERbase + (irq_src << 4);
-
-#ifdef DEBUG_IRQUSE
-	printk("psc_irq_disable(%d)\n", irq);
-#endif
-	psc_write_byte(pIER, 1 << irq_idx);
-}
diff --git a/ANDROID_3.4.5/arch/m68k/mac/via.c b/ANDROID_3.4.5/arch/m68k/mac/via.c
deleted file mode 100644
index 2d856627..00000000
--- a/ANDROID_3.4.5/arch/m68k/mac/via.c
+++ /dev/null
@@ -1,622 +0,0 @@
-/*
- *	6522 Versatile Interface Adapter (VIA)
- *
- *	There are two of these on the Mac II. Some IRQs are vectored
- *	via them as are assorted bits and bobs - eg RTC, ADB.
- *
- * CSA: Motorola seems to have removed documentation on the 6522 from
- * their web site; try
- *     http://nerini.drf.com/vectrex/other/text/chips/6522/
- *     http://www.zymurgy.net/classic/vic20/vicdet1.htm
- * and
- *     http://193.23.168.87/mikro_laborversuche/via_iobaustein/via6522_1.html
- * for info.  A full-text web search on 6522 AND VIA will probably also
- * net some usefulness. <cananian@alumni.princeton.edu> 20apr1999
- *
- * Additional data is here (the SY6522 was used in the Mac II etc):
- *     http://www.6502.org/documents/datasheets/synertek/synertek_sy6522.pdf
- *     http://www.6502.org/documents/datasheets/synertek/synertek_sy6522_programming_reference.pdf
- *
- * PRAM/RTC access algorithms are from the NetBSD RTC toolkit version 1.08b
- * by Erik Vogan and adapted to Linux by Joshua M. Thompson (funaho@jurai.org)
- *
- */
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/irq.h>
-
-#include <asm/bootinfo.h>
-#include <asm/macintosh.h>
-#include <asm/macints.h>
-#include <asm/mac_via.h>
-#include <asm/mac_psc.h>
-#include <asm/mac_oss.h>
-
-volatile __u8 *via1, *via2;
-int rbv_present;
-int via_alt_mapping;
-EXPORT_SYMBOL(via_alt_mapping);
-static __u8 rbv_clear;
-
-/*
- * Globals for accessing the VIA chip registers without having to
- * check if we're hitting a real VIA or an RBV. Normally you could
- * just hit the combined register (ie, vIER|rIER) but that seems to
- * break on AV Macs...probably because they actually decode more than
- * eight address bits. Why can't Apple engineers at least be
- * _consistently_ lazy?                          - 1999-05-21 (jmt)
- */
-
-static int gIER,gIFR,gBufA,gBufB;
-
-/*
- * Timer defs.
- */
-
-#define TICK_SIZE		10000
-#define MAC_CLOCK_TICK		(783300/HZ)		/* ticks per HZ */
-#define MAC_CLOCK_LOW		(MAC_CLOCK_TICK&0xFF)
-#define MAC_CLOCK_HIGH		(MAC_CLOCK_TICK>>8)
-
-
-/*
- * On Macs with a genuine VIA chip there is no way to mask an individual slot
- * interrupt. This limitation also seems to apply to VIA clone logic cores in
- * Quadra-like ASICs. (RBV and OSS machines don't have this limitation.)
- *
- * We used to fake it by configuring the relevent VIA pin as an output
- * (to mask the interrupt) or input (to unmask). That scheme did not work on
- * (at least) the Quadra 700. A NuBus card's /NMRQ signal is an open-collector
- * circuit (see Designing Cards and Drivers for Macintosh II and Macintosh SE,
- * p. 10-11 etc) but VIA outputs are not (see datasheet).
- *
- * Driving these outputs high must cause the VIA to source current and the
- * card to sink current when it asserts /NMRQ. Current will flow but the pin
- * voltage is uncertain and so the /NMRQ condition may still cause a transition
- * at the VIA2 CA1 input (which explains the lost interrupts). A side effect
- * is that a disabled slot IRQ can never be tested as pending or not.
- *
- * Driving these outputs low doesn't work either. All the slot /NMRQ lines are
- * (active low) OR'd together to generate the CA1 (aka "SLOTS") interrupt (see
- * The Guide To Macintosh Family Hardware, 2nd edition p. 167). If we drive a
- * disabled /NMRQ line low, the falling edge immediately triggers a CA1
- * interrupt and all slot interrupts after that will generate no transition
- * and therefore no interrupt, even after being re-enabled.
- *
- * So we make the VIA port A I/O lines inputs and use nubus_disabled to keep
- * track of their states. When any slot IRQ becomes disabled we mask the CA1
- * umbrella interrupt. Only when all slot IRQs become enabled do we unmask
- * the CA1 interrupt. It must remain enabled even when cards have no interrupt
- * handler registered. Drivers must therefore disable a slot interrupt at the
- * device before they call free_irq (like shared and autovector interrupts).
- *
- * There is also a related problem when MacOS is used to boot Linux. A network
- * card brought up by a MacOS driver may raise an interrupt while Linux boots.
- * This can be fatal since it can't be handled until the right driver loads
- * (if such a driver exists at all). Apparently related to this hardware
- * limitation, "Designing Cards and Drivers", p. 9-8, says that a slot
- * interrupt with no driver would crash MacOS (the book was written before
- * the appearance of Macs with RBV or OSS).
- */
-
-static u8 nubus_disabled;
-
-void via_debug_dump(void);
-
-/*
- * Initialize the VIAs
- *
- * First we figure out where they actually _are_ as well as what type of
- * VIA we have for VIA2 (it could be a real VIA or an RBV or even an OSS.)
- * Then we pretty much clear them out and disable all IRQ sources.
- *
- * Note: the OSS is actually "detected" here and not in oss_init(). It just
- *	 seems more logical to do it here since via_init() needs to know
- *	 these things anyways.
- */
-
-void __init via_init(void)
-{
-	switch(macintosh_config->via_type) {
-
-		/* IIci, IIsi, IIvx, IIvi (P6xx), LC series */
-
-		case MAC_VIA_IICI:
-			via1 = (void *) VIA1_BASE;
-			if (macintosh_config->ident == MAC_MODEL_IIFX) {
-				via2 = NULL;
-				rbv_present = 0;
-				oss_present = 1;
-			} else {
-				via2 = (void *) RBV_BASE;
-				rbv_present = 1;
-				oss_present = 0;
-			}
-			if (macintosh_config->ident == MAC_MODEL_LCIII) {
-				rbv_clear = 0x00;
-			} else {
-				/* on most RBVs (& unlike the VIAs), you   */
-				/* need to set bit 7 when you write to IFR */
-				/* in order for your clear to occur.       */
-				rbv_clear = 0x80;
-			}
-			gIER = rIER;
-			gIFR = rIFR;
-			gBufA = rSIFR;
-			gBufB = rBufB;
-			break;
-
-		/* Quadra and early MacIIs agree on the VIA locations */
-
-		case MAC_VIA_QUADRA:
-		case MAC_VIA_II:
-			via1 = (void *) VIA1_BASE;
-			via2 = (void *) VIA2_BASE;
-			rbv_present = 0;
-			oss_present = 0;
-			rbv_clear = 0x00;
-			gIER = vIER;
-			gIFR = vIFR;
-			gBufA = vBufA;
-			gBufB = vBufB;
-			break;
-		default:
-			panic("UNKNOWN VIA TYPE");
-	}
-
-	printk(KERN_INFO "VIA1 at %p is a 6522 or clone\n", via1);
-
-	printk(KERN_INFO "VIA2 at %p is ", via2);
-	if (rbv_present) {
-		printk("an RBV\n");
-	} else if (oss_present) {
-		printk("an OSS\n");
-	} else {
-		printk("a 6522 or clone\n");
-	}
-
-#ifdef DEBUG_VIA
-	via_debug_dump();
-#endif
-
-	/*
-	 * Shut down all IRQ sources, reset the timers, and
-	 * kill the timer latch on VIA1.
-	 */
-
-	via1[vIER] = 0x7F;
-	via1[vIFR] = 0x7F;
-	via1[vT1LL] = 0;
-	via1[vT1LH] = 0;
-	via1[vT1CL] = 0;
-	via1[vT1CH] = 0;
-	via1[vT2CL] = 0;
-	via1[vT2CH] = 0;
-	via1[vACR] &= ~0xC0; /* setup T1 timer with no PB7 output */
-	via1[vACR] &= ~0x03; /* disable port A & B latches */
-
-	/*
-	 * SE/30: disable video IRQ
-	 * XXX: testing for SE/30 VBL
-	 */
-
-	if (macintosh_config->ident == MAC_MODEL_SE30) {
-		via1[vDirB] |= 0x40;
-		via1[vBufB] |= 0x40;
-	}
-
-	/*
-	 * Set the RTC bits to a known state: all lines to outputs and
-	 * RTC disabled (yes that's 0 to enable and 1 to disable).
-	 */
-
-	via1[vDirB] |= (VIA1B_vRTCEnb | VIA1B_vRTCClk | VIA1B_vRTCData);
-	via1[vBufB] |= (VIA1B_vRTCEnb | VIA1B_vRTCClk);
-
-	/* Everything below this point is VIA2/RBV only... */
-
-	if (oss_present)
-		return;
-
-	if ((macintosh_config->via_type == MAC_VIA_QUADRA) &&
-	    (macintosh_config->adb_type != MAC_ADB_PB1) &&
-	    (macintosh_config->adb_type != MAC_ADB_PB2) &&
-	    (macintosh_config->ident    != MAC_MODEL_C660) &&
-	    (macintosh_config->ident    != MAC_MODEL_Q840)) {
-		via_alt_mapping = 1;
-		via1[vDirB] |= 0x40;
-		via1[vBufB] &= ~0x40;
-	} else {
-		via_alt_mapping = 0;
-	}
-
-	/*
-	 * Now initialize VIA2. For RBV we just kill all interrupts;
-	 * for a regular VIA we also reset the timers and stuff.
-	 */
-
-	via2[gIER] = 0x7F;
-	via2[gIFR] = 0x7F | rbv_clear;
-	if (!rbv_present) {
-		via2[vT1LL] = 0;
-		via2[vT1LH] = 0;
-		via2[vT1CL] = 0;
-		via2[vT1CH] = 0;
-		via2[vT2CL] = 0;
-		via2[vT2CH] = 0;
-		via2[vACR] &= ~0xC0; /* setup T1 timer with no PB7 output */
-		via2[vACR] &= ~0x03; /* disable port A & B latches */
-	}
-
-	/* Everything below this point is VIA2 only... */
-
-	if (rbv_present)
-		return;
-
-	/*
-	 * Set vPCR for control line interrupts.
-	 *
-	 * CA1 (SLOTS IRQ), CB1 (ASC IRQ): negative edge trigger.
-	 *
-	 * Macs with ESP SCSI have a negative edge triggered SCSI interrupt.
-	 * Testing reveals that PowerBooks do too. However, the SE/30
-	 * schematic diagram shows an active high NCR5380 IRQ line.
-	 */
-
-	pr_debug("VIA2 vPCR is 0x%02X\n", via2[vPCR]);
-	if (macintosh_config->via_type == MAC_VIA_II) {
-		/* CA2 (SCSI DRQ), CB2 (SCSI IRQ): indep. input, pos. edge */
-		via2[vPCR] = 0x66;
-	} else {
-		/* CA2 (SCSI DRQ), CB2 (SCSI IRQ): indep. input, neg. edge */
-		via2[vPCR] = 0x22;
-	}
-}
-
-/*
- * Start the 100 Hz clock
- */
-
-void __init via_init_clock(irq_handler_t func)
-{
-	via1[vACR] |= 0x40;
-	via1[vT1LL] = MAC_CLOCK_LOW;
-	via1[vT1LH] = MAC_CLOCK_HIGH;
-	via1[vT1CL] = MAC_CLOCK_LOW;
-	via1[vT1CH] = MAC_CLOCK_HIGH;
-
-	if (request_irq(IRQ_MAC_TIMER_1, func, 0, "timer", func))
-		pr_err("Couldn't register %s interrupt\n", "timer");
-}
-
-/*
- * Debugging dump, used in various places to see what's going on.
- */
-
-void via_debug_dump(void)
-{
-	printk(KERN_DEBUG "VIA1: DDRA = 0x%02X DDRB = 0x%02X ACR = 0x%02X\n",
-		(uint) via1[vDirA], (uint) via1[vDirB], (uint) via1[vACR]);
-	printk(KERN_DEBUG "         PCR = 0x%02X  IFR = 0x%02X IER = 0x%02X\n",
-		(uint) via1[vPCR], (uint) via1[vIFR], (uint) via1[vIER]);
-	if (oss_present) {
-		printk(KERN_DEBUG "VIA2: <OSS>\n");
-	} else if (rbv_present) {
-		printk(KERN_DEBUG "VIA2:  IFR = 0x%02X  IER = 0x%02X\n",
-			(uint) via2[rIFR], (uint) via2[rIER]);
-		printk(KERN_DEBUG "      SIFR = 0x%02X SIER = 0x%02X\n",
-			(uint) via2[rSIFR], (uint) via2[rSIER]);
-	} else {
-		printk(KERN_DEBUG "VIA2: DDRA = 0x%02X DDRB = 0x%02X ACR = 0x%02X\n",
-			(uint) via2[vDirA], (uint) via2[vDirB],
-			(uint) via2[vACR]);
-		printk(KERN_DEBUG "         PCR = 0x%02X  IFR = 0x%02X IER = 0x%02X\n",
-			(uint) via2[vPCR],
-			(uint) via2[vIFR], (uint) via2[vIER]);
-	}
-}
-
-/*
- * This is always executed with interrupts disabled.
- *
- * TBI: get time offset between scheduling timer ticks
- */
-
-unsigned long mac_gettimeoffset (void)
-{
-	unsigned long ticks, offset = 0;
-
-	/* read VIA1 timer 2 current value */
-	ticks = via1[vT1CL] | (via1[vT1CH] << 8);
-	/* The probability of underflow is less than 2% */
-	if (ticks > MAC_CLOCK_TICK - MAC_CLOCK_TICK / 50)
-		/* Check for pending timer interrupt in VIA1 IFR */
-		if (via1[vIFR] & 0x40) offset = TICK_SIZE;
-
-	ticks = MAC_CLOCK_TICK - ticks;
-	ticks = ticks * 10000L / MAC_CLOCK_TICK;
-
-	return ticks + offset;
-}
-
-/*
- * Flush the L2 cache on Macs that have it by flipping
- * the system into 24-bit mode for an instant.
- */
-
-void via_flush_cache(void)
-{
-	via2[gBufB] &= ~VIA2B_vMode32;
-	via2[gBufB] |= VIA2B_vMode32;
-}
-
-/*
- * Return the status of the L2 cache on a IIci
- */
-
-int via_get_cache_disable(void)
-{
-	/* Safeguard against being called accidentally */
-	if (!via2) {
-		printk(KERN_ERR "via_get_cache_disable called on a non-VIA machine!\n");
-		return 1;
-	}
-
-	return (int) via2[gBufB] & VIA2B_vCDis;
-}
-
-/*
- * Initialize VIA2 for Nubus access
- */
-
-void __init via_nubus_init(void)
-{
-	/* unlock nubus transactions */
-
-	if ((macintosh_config->adb_type != MAC_ADB_PB1) &&
-	    (macintosh_config->adb_type != MAC_ADB_PB2)) {
-		/* set the line to be an output on non-RBV machines */
-		if (!rbv_present)
-			via2[vDirB] |= 0x02;
-
-		/* this seems to be an ADB bit on PMU machines */
-		/* according to MkLinux.  -- jmt               */
-		via2[gBufB] |= 0x02;
-	}
-
-	/*
-	 * Disable the slot interrupts. On some hardware that's not possible.
-	 * On some hardware it's unclear what all of these I/O lines do.
-	 */
-
-	switch (macintosh_config->via_type) {
-	case MAC_VIA_II:
-	case MAC_VIA_QUADRA:
-		pr_debug("VIA2 vDirA is 0x%02X\n", via2[vDirA]);
-		break;
-	case MAC_VIA_IICI:
-		/* RBV. Disable all the slot interrupts. SIER works like IER. */
-		via2[rSIER] = 0x7F;
-		break;
-	}
-}
-
-void via_nubus_irq_startup(int irq)
-{
-	int irq_idx = IRQ_IDX(irq);
-
-	switch (macintosh_config->via_type) {
-	case MAC_VIA_II:
-	case MAC_VIA_QUADRA:
-		/* Make the port A line an input. Probably redundant. */
-		if (macintosh_config->via_type == MAC_VIA_II) {
-			/* The top two bits are RAM size outputs. */
-			via2[vDirA] &= 0xC0 | ~(1 << irq_idx);
-		} else {
-			/* Allow NuBus slots 9 through F. */
-			via2[vDirA] &= 0x80 | ~(1 << irq_idx);
-		}
-		/* fall through */
-	case MAC_VIA_IICI:
-		via_irq_enable(irq);
-		break;
-	}
-}
-
-void via_nubus_irq_shutdown(int irq)
-{
-	switch (macintosh_config->via_type) {
-	case MAC_VIA_II:
-	case MAC_VIA_QUADRA:
-		/* Ensure that the umbrella CA1 interrupt remains enabled. */
-		via_irq_enable(irq);
-		break;
-	case MAC_VIA_IICI:
-		via_irq_disable(irq);
-		break;
-	}
-}
-
-/*
- * The generic VIA interrupt routines (shamelessly stolen from Alan Cox's
- * via6522.c :-), disable/pending masks added.
- */
-
-void via1_irq(unsigned int irq, struct irq_desc *desc)
-{
-	int irq_num;
-	unsigned char irq_bit, events;
-
-	events = via1[vIFR] & via1[vIER] & 0x7F;
-	if (!events)
-		return;
-
-	irq_num = VIA1_SOURCE_BASE;
-	irq_bit = 1;
-	do {
-		if (events & irq_bit) {
-			via1[vIFR] = irq_bit;
-			generic_handle_irq(irq_num);
-		}
-		++irq_num;
-		irq_bit <<= 1;
-	} while (events >= irq_bit);
-}
-
-static void via2_irq(unsigned int irq, struct irq_desc *desc)
-{
-	int irq_num;
-	unsigned char irq_bit, events;
-
-	events = via2[gIFR] & via2[gIER] & 0x7F;
-	if (!events)
-		return;
-
-	irq_num = VIA2_SOURCE_BASE;
-	irq_bit = 1;
-	do {
-		if (events & irq_bit) {
-			via2[gIFR] = irq_bit | rbv_clear;
-			generic_handle_irq(irq_num);
-		}
-		++irq_num;
-		irq_bit <<= 1;
-	} while (events >= irq_bit);
-}
-
-/*
- * Dispatch Nubus interrupts. We are called as a secondary dispatch by the
- * VIA2 dispatcher as a fast interrupt handler.
- */
-
-void via_nubus_irq(unsigned int irq, struct irq_desc *desc)
-{
-	int slot_irq;
-	unsigned char slot_bit, events;
-
-	events = ~via2[gBufA] & 0x7F;
-	if (rbv_present)
-		events &= via2[rSIER];
-	else
-		events &= ~via2[vDirA];
-	if (!events)
-		return;
-
-	do {
-		slot_irq = IRQ_NUBUS_F;
-		slot_bit = 0x40;
-		do {
-			if (events & slot_bit) {
-				events &= ~slot_bit;
-				generic_handle_irq(slot_irq);
-			}
-			--slot_irq;
-			slot_bit >>= 1;
-		} while (events);
-
- 		/* clear the CA1 interrupt and make certain there's no more. */
-		via2[gIFR] = 0x02 | rbv_clear;
-		events = ~via2[gBufA] & 0x7F;
-		if (rbv_present)
-			events &= via2[rSIER];
-		else
-			events &= ~via2[vDirA];
-	} while (events);
-}
-
-/*
- * Register the interrupt dispatchers for VIA or RBV machines only.
- */
-
-void __init via_register_interrupts(void)
-{
-	if (via_alt_mapping) {
-		/* software interrupt */
-		irq_set_chained_handler(IRQ_AUTO_1, via1_irq);
-		/* via1 interrupt */
-		irq_set_chained_handler(IRQ_AUTO_6, via1_irq);
-	} else {
-		irq_set_chained_handler(IRQ_AUTO_1, via1_irq);
-	}
-	irq_set_chained_handler(IRQ_AUTO_2, via2_irq);
-	irq_set_chained_handler(IRQ_MAC_NUBUS, via_nubus_irq);
-}
-
-void via_irq_enable(int irq) {
-	int irq_src	= IRQ_SRC(irq);
-	int irq_idx	= IRQ_IDX(irq);
-
-#ifdef DEBUG_IRQUSE
-	printk(KERN_DEBUG "via_irq_enable(%d)\n", irq);
-#endif
-
-	if (irq_src == 1) {
-		via1[vIER] = IER_SET_BIT(irq_idx);
-	} else if (irq_src == 2) {
-		if (irq != IRQ_MAC_NUBUS || nubus_disabled == 0)
-			via2[gIER] = IER_SET_BIT(irq_idx);
-	} else if (irq_src == 7) {
-		switch (macintosh_config->via_type) {
-		case MAC_VIA_II:
-		case MAC_VIA_QUADRA:
-			nubus_disabled &= ~(1 << irq_idx);
-			/* Enable the CA1 interrupt when no slot is disabled. */
-			if (!nubus_disabled)
-				via2[gIER] = IER_SET_BIT(1);
-			break;
-		case MAC_VIA_IICI:
-			/* On RBV, enable the slot interrupt.
-			 * SIER works like IER.
-			 */
-			via2[rSIER] = IER_SET_BIT(irq_idx);
-			break;
-		}
-	}
-}
-
-void via_irq_disable(int irq) {
-	int irq_src	= IRQ_SRC(irq);
-	int irq_idx	= IRQ_IDX(irq);
-
-#ifdef DEBUG_IRQUSE
-	printk(KERN_DEBUG "via_irq_disable(%d)\n", irq);
-#endif
-
-	if (irq_src == 1) {
-		via1[vIER] = IER_CLR_BIT(irq_idx);
-	} else if (irq_src == 2) {
-		via2[gIER] = IER_CLR_BIT(irq_idx);
-	} else if (irq_src == 7) {
-		switch (macintosh_config->via_type) {
-		case MAC_VIA_II:
-		case MAC_VIA_QUADRA:
-			nubus_disabled |= 1 << irq_idx;
-			if (nubus_disabled)
-				via2[gIER] = IER_CLR_BIT(1);
-			break;
-		case MAC_VIA_IICI:
-			via2[rSIER] = IER_CLR_BIT(irq_idx);
-			break;
-		}
-	}
-}
-
-void via1_set_head(int head)
-{
-	if (head == 0)
-		via1[vBufA] &= ~VIA1A_vHeadSel;
-	else
-		via1[vBufA] |= VIA1A_vHeadSel;
-}
-EXPORT_SYMBOL(via1_set_head);
-
-int via2_scsi_drq_pending(void)
-{
-	return via2[gIFR] & (1 << IRQ_IDX(IRQ_MAC_SCSIDRQ));
-}
-EXPORT_SYMBOL(via2_scsi_drq_pending);
diff --git a/ANDROID_3.4.5/arch/m68k/math-emu/Makefile b/ANDROID_3.4.5/arch/m68k/math-emu/Makefile
deleted file mode 100644
index 547c23c6..00000000
--- a/ANDROID_3.4.5/arch/m68k/math-emu/Makefile
+++ /dev/null
@@ -1,9 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-#asflags-y := -DFPU_EMU_DEBUG
-#ccflags-y := -DFPU_EMU_DEBUG
-
-obj-y		:= fp_entry.o fp_scan.o fp_util.o fp_move.o fp_movem.o \
-			fp_cond.o fp_arith.o fp_log.o fp_trig.o
diff --git a/ANDROID_3.4.5/arch/m68k/math-emu/fp_arith.c b/ANDROID_3.4.5/arch/m68k/math-emu/fp_arith.c
deleted file mode 100644
index 08f286db..00000000
--- a/ANDROID_3.4.5/arch/m68k/math-emu/fp_arith.c
+++ /dev/null
@@ -1,701 +0,0 @@
-/*
-
-   fp_arith.c: floating-point math routines for the Linux-m68k
-   floating point emulator.
-
-   Copyright (c) 1998-1999 David Huggins-Daines.
-
-   Somewhat based on the AlphaLinux floating point emulator, by David
-   Mosberger-Tang.
-
-   You may copy, modify, and redistribute this file under the terms of
-   the GNU General Public License, version 2, or any later version, at
-   your convenience.
- */
-
-#include "fp_emu.h"
-#include "multi_arith.h"
-#include "fp_arith.h"
-
-const struct fp_ext fp_QNaN =
-{
-	.exp = 0x7fff,
-	.mant = { .m64 = ~0 }
-};
-
-const struct fp_ext fp_Inf =
-{
-	.exp = 0x7fff,
-};
-
-/* let's start with the easy ones */
-
-struct fp_ext *
-fp_fabs(struct fp_ext *dest, struct fp_ext *src)
-{
-	dprint(PINSTR, "fabs\n");
-
-	fp_monadic_check(dest, src);
-
-	dest->sign = 0;
-
-	return dest;
-}
-
-struct fp_ext *
-fp_fneg(struct fp_ext *dest, struct fp_ext *src)
-{
-	dprint(PINSTR, "fneg\n");
-
-	fp_monadic_check(dest, src);
-
-	dest->sign = !dest->sign;
-
-	return dest;
-}
-
-/* Now, the slightly harder ones */
-
-/* fp_fadd: Implements the kernel of the FADD, FSADD, FDADD, FSUB,
-   FDSUB, and FCMP instructions. */
-
-struct fp_ext *
-fp_fadd(struct fp_ext *dest, struct fp_ext *src)
-{
-	int diff;
-
-	dprint(PINSTR, "fadd\n");
-
-	fp_dyadic_check(dest, src);
-
-	if (IS_INF(dest)) {
-		/* infinity - infinity == NaN */
-		if (IS_INF(src) && (src->sign != dest->sign))
-			fp_set_nan(dest);
-		return dest;
-	}
-	if (IS_INF(src)) {
-		fp_copy_ext(dest, src);
-		return dest;
-	}
-
-	if (IS_ZERO(dest)) {
-		if (IS_ZERO(src)) {
-			if (src->sign != dest->sign) {
-				if (FPDATA->rnd == FPCR_ROUND_RM)
-					dest->sign = 1;
-				else
-					dest->sign = 0;
-			}
-		} else
-			fp_copy_ext(dest, src);
-		return dest;
-	}
-
-	dest->lowmant = src->lowmant = 0;
-
-	if ((diff = dest->exp - src->exp) > 0)
-		fp_denormalize(src, diff);
-	else if ((diff = -diff) > 0)
-		fp_denormalize(dest, diff);
-
-	if (dest->sign == src->sign) {
-		if (fp_addmant(dest, src))
-			if (!fp_addcarry(dest))
-				return dest;
-	} else {
-		if (dest->mant.m64 < src->mant.m64) {
-			fp_submant(dest, src, dest);
-			dest->sign = !dest->sign;
-		} else
-			fp_submant(dest, dest, src);
-	}
-
-	return dest;
-}
-
-/* fp_fsub: Implements the kernel of the FSUB, FSSUB, and FDSUB
-   instructions.
-
-   Remember that the arguments are in assembler-syntax order! */
-
-struct fp_ext *
-fp_fsub(struct fp_ext *dest, struct fp_ext *src)
-{
-	dprint(PINSTR, "fsub ");
-
-	src->sign = !src->sign;
-	return fp_fadd(dest, src);
-}
-
-
-struct fp_ext *
-fp_fcmp(struct fp_ext *dest, struct fp_ext *src)
-{
-	dprint(PINSTR, "fcmp ");
-
-	FPDATA->temp[1] = *dest;
-	src->sign = !src->sign;
-	return fp_fadd(&FPDATA->temp[1], src);
-}
-
-struct fp_ext *
-fp_ftst(struct fp_ext *dest, struct fp_ext *src)
-{
-	dprint(PINSTR, "ftst\n");
-
-	(void)dest;
-
-	return src;
-}
-
-struct fp_ext *
-fp_fmul(struct fp_ext *dest, struct fp_ext *src)
-{
-	union fp_mant128 temp;
-	int exp;
-
-	dprint(PINSTR, "fmul\n");
-
-	fp_dyadic_check(dest, src);
-
-	/* calculate the correct sign now, as it's necessary for infinities */
-	dest->sign = src->sign ^ dest->sign;
-
-	/* Handle infinities */
-	if (IS_INF(dest)) {
-		if (IS_ZERO(src))
-			fp_set_nan(dest);
-		return dest;
-	}
-	if (IS_INF(src)) {
-		if (IS_ZERO(dest))
-			fp_set_nan(dest);
-		else
-			fp_copy_ext(dest, src);
-		return dest;
-	}
-
-	/* Of course, as we all know, zero * anything = zero.  You may
-	   not have known that it might be a positive or negative
-	   zero... */
-	if (IS_ZERO(dest) || IS_ZERO(src)) {
-		dest->exp = 0;
-		dest->mant.m64 = 0;
-		dest->lowmant = 0;
-
-		return dest;
-	}
-
-	exp = dest->exp + src->exp - 0x3ffe;
-
-	/* shift up the mantissa for denormalized numbers,
-	   so that the highest bit is set, this makes the
-	   shift of the result below easier */
-	if ((long)dest->mant.m32[0] >= 0)
-		exp -= fp_overnormalize(dest);
-	if ((long)src->mant.m32[0] >= 0)
-		exp -= fp_overnormalize(src);
-
-	/* now, do a 64-bit multiply with expansion */
-	fp_multiplymant(&temp, dest, src);
-
-	/* normalize it back to 64 bits and stuff it back into the
-	   destination struct */
-	if ((long)temp.m32[0] > 0) {
-		exp--;
-		fp_putmant128(dest, &temp, 1);
-	} else
-		fp_putmant128(dest, &temp, 0);
-
-	if (exp >= 0x7fff) {
-		fp_set_ovrflw(dest);
-		return dest;
-	}
-	dest->exp = exp;
-	if (exp < 0) {
-		fp_set_sr(FPSR_EXC_UNFL);
-		fp_denormalize(dest, -exp);
-	}
-
-	return dest;
-}
-
-/* fp_fdiv: Implements the "kernel" of the FDIV, FSDIV, FDDIV and
-   FSGLDIV instructions.
-
-   Note that the order of the operands is counter-intuitive: instead
-   of src / dest, the result is actually dest / src. */
-
-struct fp_ext *
-fp_fdiv(struct fp_ext *dest, struct fp_ext *src)
-{
-	union fp_mant128 temp;
-	int exp;
-
-	dprint(PINSTR, "fdiv\n");
-
-	fp_dyadic_check(dest, src);
-
-	/* calculate the correct sign now, as it's necessary for infinities */
-	dest->sign = src->sign ^ dest->sign;
-
-	/* Handle infinities */
-	if (IS_INF(dest)) {
-		/* infinity / infinity = NaN (quiet, as always) */
-		if (IS_INF(src))
-			fp_set_nan(dest);
-		/* infinity / anything else = infinity (with approprate sign) */
-		return dest;
-	}
-	if (IS_INF(src)) {
-		/* anything / infinity = zero (with appropriate sign) */
-		dest->exp = 0;
-		dest->mant.m64 = 0;
-		dest->lowmant = 0;
-
-		return dest;
-	}
-
-	/* zeroes */
-	if (IS_ZERO(dest)) {
-		/* zero / zero = NaN */
-		if (IS_ZERO(src))
-			fp_set_nan(dest);
-		/* zero / anything else = zero */
-		return dest;
-	}
-	if (IS_ZERO(src)) {
-		/* anything / zero = infinity (with appropriate sign) */
-		fp_set_sr(FPSR_EXC_DZ);
-		dest->exp = 0x7fff;
-		dest->mant.m64 = 0;
-
-		return dest;
-	}
-
-	exp = dest->exp - src->exp + 0x3fff;
-
-	/* shift up the mantissa for denormalized numbers,
-	   so that the highest bit is set, this makes lots
-	   of things below easier */
-	if ((long)dest->mant.m32[0] >= 0)
-		exp -= fp_overnormalize(dest);
-	if ((long)src->mant.m32[0] >= 0)
-		exp -= fp_overnormalize(src);
-
-	/* now, do the 64-bit divide */
-	fp_dividemant(&temp, dest, src);
-
-	/* normalize it back to 64 bits and stuff it back into the
-	   destination struct */
-	if (!temp.m32[0]) {
-		exp--;
-		fp_putmant128(dest, &temp, 32);
-	} else
-		fp_putmant128(dest, &temp, 31);
-
-	if (exp >= 0x7fff) {
-		fp_set_ovrflw(dest);
-		return dest;
-	}
-	dest->exp = exp;
-	if (exp < 0) {
-		fp_set_sr(FPSR_EXC_UNFL);
-		fp_denormalize(dest, -exp);
-	}
-
-	return dest;
-}
-
-struct fp_ext *
-fp_fsglmul(struct fp_ext *dest, struct fp_ext *src)
-{
-	int exp;
-
-	dprint(PINSTR, "fsglmul\n");
-
-	fp_dyadic_check(dest, src);
-
-	/* calculate the correct sign now, as it's necessary for infinities */
-	dest->sign = src->sign ^ dest->sign;
-
-	/* Handle infinities */
-	if (IS_INF(dest)) {
-		if (IS_ZERO(src))
-			fp_set_nan(dest);
-		return dest;
-	}
-	if (IS_INF(src)) {
-		if (IS_ZERO(dest))
-			fp_set_nan(dest);
-		else
-			fp_copy_ext(dest, src);
-		return dest;
-	}
-
-	/* Of course, as we all know, zero * anything = zero.  You may
-	   not have known that it might be a positive or negative
-	   zero... */
-	if (IS_ZERO(dest) || IS_ZERO(src)) {
-		dest->exp = 0;
-		dest->mant.m64 = 0;
-		dest->lowmant = 0;
-
-		return dest;
-	}
-
-	exp = dest->exp + src->exp - 0x3ffe;
-
-	/* do a 32-bit multiply */
-	fp_mul64(dest->mant.m32[0], dest->mant.m32[1],
-		 dest->mant.m32[0] & 0xffffff00,
-		 src->mant.m32[0] & 0xffffff00);
-
-	if (exp >= 0x7fff) {
-		fp_set_ovrflw(dest);
-		return dest;
-	}
-	dest->exp = exp;
-	if (exp < 0) {
-		fp_set_sr(FPSR_EXC_UNFL);
-		fp_denormalize(dest, -exp);
-	}
-
-	return dest;
-}
-
-struct fp_ext *
-fp_fsgldiv(struct fp_ext *dest, struct fp_ext *src)
-{
-	int exp;
-	unsigned long quot, rem;
-
-	dprint(PINSTR, "fsgldiv\n");
-
-	fp_dyadic_check(dest, src);
-
-	/* calculate the correct sign now, as it's necessary for infinities */
-	dest->sign = src->sign ^ dest->sign;
-
-	/* Handle infinities */
-	if (IS_INF(dest)) {
-		/* infinity / infinity = NaN (quiet, as always) */
-		if (IS_INF(src))
-			fp_set_nan(dest);
-		/* infinity / anything else = infinity (with approprate sign) */
-		return dest;
-	}
-	if (IS_INF(src)) {
-		/* anything / infinity = zero (with appropriate sign) */
-		dest->exp = 0;
-		dest->mant.m64 = 0;
-		dest->lowmant = 0;
-
-		return dest;
-	}
-
-	/* zeroes */
-	if (IS_ZERO(dest)) {
-		/* zero / zero = NaN */
-		if (IS_ZERO(src))
-			fp_set_nan(dest);
-		/* zero / anything else = zero */
-		return dest;
-	}
-	if (IS_ZERO(src)) {
-		/* anything / zero = infinity (with appropriate sign) */
-		fp_set_sr(FPSR_EXC_DZ);
-		dest->exp = 0x7fff;
-		dest->mant.m64 = 0;
-
-		return dest;
-	}
-
-	exp = dest->exp - src->exp + 0x3fff;
-
-	dest->mant.m32[0] &= 0xffffff00;
-	src->mant.m32[0] &= 0xffffff00;
-
-	/* do the 32-bit divide */
-	if (dest->mant.m32[0] >= src->mant.m32[0]) {
-		fp_sub64(dest->mant, src->mant);
-		fp_div64(quot, rem, dest->mant.m32[0], 0, src->mant.m32[0]);
-		dest->mant.m32[0] = 0x80000000 | (quot >> 1);
-		dest->mant.m32[1] = (quot & 1) | rem;	/* only for rounding */
-	} else {
-		fp_div64(quot, rem, dest->mant.m32[0], 0, src->mant.m32[0]);
-		dest->mant.m32[0] = quot;
-		dest->mant.m32[1] = rem;		/* only for rounding */
-		exp--;
-	}
-
-	if (exp >= 0x7fff) {
-		fp_set_ovrflw(dest);
-		return dest;
-	}
-	dest->exp = exp;
-	if (exp < 0) {
-		fp_set_sr(FPSR_EXC_UNFL);
-		fp_denormalize(dest, -exp);
-	}
-
-	return dest;
-}
-
-/* fp_roundint: Internal rounding function for use by several of these
-   emulated instructions.
-
-   This one rounds off the fractional part using the rounding mode
-   specified. */
-
-static void fp_roundint(struct fp_ext *dest, int mode)
-{
-	union fp_mant64 oldmant;
-	unsigned long mask;
-
-	if (!fp_normalize_ext(dest))
-		return;
-
-	/* infinities and zeroes */
-	if (IS_INF(dest) || IS_ZERO(dest))
-		return;
-
-	/* first truncate the lower bits */
-	oldmant = dest->mant;
-	switch (dest->exp) {
-	case 0 ... 0x3ffe:
-		dest->mant.m64 = 0;
-		break;
-	case 0x3fff ... 0x401e:
-		dest->mant.m32[0] &= 0xffffffffU << (0x401e - dest->exp);
-		dest->mant.m32[1] = 0;
-		if (oldmant.m64 == dest->mant.m64)
-			return;
-		break;
-	case 0x401f ... 0x403e:
-		dest->mant.m32[1] &= 0xffffffffU << (0x403e - dest->exp);
-		if (oldmant.m32[1] == dest->mant.m32[1])
-			return;
-		break;
-	default:
-		return;
-	}
-	fp_set_sr(FPSR_EXC_INEX2);
-
-	/* We might want to normalize upwards here... however, since
-	   we know that this is only called on the output of fp_fdiv,
-	   or with the input to fp_fint or fp_fintrz, and the inputs
-	   to all these functions are either normal or denormalized
-	   (no subnormals allowed!), there's really no need.
-
-	   In the case of fp_fdiv, observe that 0x80000000 / 0xffff =
-	   0xffff8000, and the same holds for 128-bit / 64-bit. (i.e. the
-	   smallest possible normal dividend and the largest possible normal
-	   divisor will still produce a normal quotient, therefore, (normal
-	   << 64) / normal is normal in all cases) */
-
-	switch (mode) {
-	case FPCR_ROUND_RN:
-		switch (dest->exp) {
-		case 0 ... 0x3ffd:
-			return;
-		case 0x3ffe:
-			/* As noted above, the input is always normal, so the
-			   guard bit (bit 63) is always set.  therefore, the
-			   only case in which we will NOT round to 1.0 is when
-			   the input is exactly 0.5. */
-			if (oldmant.m64 == (1ULL << 63))
-				return;
-			break;
-		case 0x3fff ... 0x401d:
-			mask = 1 << (0x401d - dest->exp);
-			if (!(oldmant.m32[0] & mask))
-				return;
-			if (oldmant.m32[0] & (mask << 1))
-				break;
-			if (!(oldmant.m32[0] << (dest->exp - 0x3ffd)) &&
-					!oldmant.m32[1])
-				return;
-			break;
-		case 0x401e:
-			if (!(oldmant.m32[1] >= 0))
-				return;
-			if (oldmant.m32[0] & 1)
-				break;
-			if (!(oldmant.m32[1] << 1))
-				return;
-			break;
-		case 0x401f ... 0x403d:
-			mask = 1 << (0x403d - dest->exp);
-			if (!(oldmant.m32[1] & mask))
-				return;
-			if (oldmant.m32[1] & (mask << 1))
-				break;
-			if (!(oldmant.m32[1] << (dest->exp - 0x401d)))
-				return;
-			break;
-		default:
-			return;
-		}
-		break;
-	case FPCR_ROUND_RZ:
-		return;
-	default:
-		if (dest->sign ^ (mode - FPCR_ROUND_RM))
-			break;
-		return;
-	}
-
-	switch (dest->exp) {
-	case 0 ... 0x3ffe:
-		dest->exp = 0x3fff;
-		dest->mant.m64 = 1ULL << 63;
-		break;
-	case 0x3fff ... 0x401e:
-		mask = 1 << (0x401e - dest->exp);
-		if (dest->mant.m32[0] += mask)
-			break;
-		dest->mant.m32[0] = 0x80000000;
-		dest->exp++;
-		break;
-	case 0x401f ... 0x403e:
-		mask = 1 << (0x403e - dest->exp);
-		if (dest->mant.m32[1] += mask)
-			break;
-		if (dest->mant.m32[0] += 1)
-                        break;
-		dest->mant.m32[0] = 0x80000000;
-                dest->exp++;
-		break;
-	}
-}
-
-/* modrem_kernel: Implementation of the FREM and FMOD instructions
-   (which are exactly the same, except for the rounding used on the
-   intermediate value) */
-
-static struct fp_ext *
-modrem_kernel(struct fp_ext *dest, struct fp_ext *src, int mode)
-{
-	struct fp_ext tmp;
-
-	fp_dyadic_check(dest, src);
-
-	/* Infinities and zeros */
-	if (IS_INF(dest) || IS_ZERO(src)) {
-		fp_set_nan(dest);
-		return dest;
-	}
-	if (IS_ZERO(dest) || IS_INF(src))
-		return dest;
-
-	/* FIXME: there is almost certainly a smarter way to do this */
-	fp_copy_ext(&tmp, dest);
-	fp_fdiv(&tmp, src);		/* NOTE: src might be modified */
-	fp_roundint(&tmp, mode);
-	fp_fmul(&tmp, src);
-	fp_fsub(dest, &tmp);
-
-	/* set the quotient byte */
-	fp_set_quotient((dest->mant.m64 & 0x7f) | (dest->sign << 7));
-	return dest;
-}
-
-/* fp_fmod: Implements the kernel of the FMOD instruction.
-
-   Again, the argument order is backwards.  The result, as defined in
-   the Motorola manuals, is:
-
-   fmod(src,dest) = (dest - (src * floor(dest / src))) */
-
-struct fp_ext *
-fp_fmod(struct fp_ext *dest, struct fp_ext *src)
-{
-	dprint(PINSTR, "fmod\n");
-	return modrem_kernel(dest, src, FPCR_ROUND_RZ);
-}
-
-/* fp_frem: Implements the kernel of the FREM instruction.
-
-   frem(src,dest) = (dest - (src * round(dest / src)))
- */
-
-struct fp_ext *
-fp_frem(struct fp_ext *dest, struct fp_ext *src)
-{
-	dprint(PINSTR, "frem\n");
-	return modrem_kernel(dest, src, FPCR_ROUND_RN);
-}
-
-struct fp_ext *
-fp_fint(struct fp_ext *dest, struct fp_ext *src)
-{
-	dprint(PINSTR, "fint\n");
-
-	fp_copy_ext(dest, src);
-
-	fp_roundint(dest, FPDATA->rnd);
-
-	return dest;
-}
-
-struct fp_ext *
-fp_fintrz(struct fp_ext *dest, struct fp_ext *src)
-{
-	dprint(PINSTR, "fintrz\n");
-
-	fp_copy_ext(dest, src);
-
-	fp_roundint(dest, FPCR_ROUND_RZ);
-
-	return dest;
-}
-
-struct fp_ext *
-fp_fscale(struct fp_ext *dest, struct fp_ext *src)
-{
-	int scale, oldround;
-
-	dprint(PINSTR, "fscale\n");
-
-	fp_dyadic_check(dest, src);
-
-	/* Infinities */
-	if (IS_INF(src)) {
-		fp_set_nan(dest);
-		return dest;
-	}
-	if (IS_INF(dest))
-		return dest;
-
-	/* zeroes */
-	if (IS_ZERO(src) || IS_ZERO(dest))
-		return dest;
-
-	/* Source exponent out of range */
-	if (src->exp >= 0x400c) {
-		fp_set_ovrflw(dest);
-		return dest;
-	}
-
-	/* src must be rounded with round to zero. */
-	oldround = FPDATA->rnd;
-	FPDATA->rnd = FPCR_ROUND_RZ;
-	scale = fp_conv_ext2long(src);
-	FPDATA->rnd = oldround;
-
-	/* new exponent */
-	scale += dest->exp;
-
-	if (scale >= 0x7fff) {
-		fp_set_ovrflw(dest);
-	} else if (scale <= 0) {
-		fp_set_sr(FPSR_EXC_UNFL);
-		fp_denormalize(dest, -scale);
-	} else
-		dest->exp = scale;
-
-	return dest;
-}
-
diff --git a/ANDROID_3.4.5/arch/m68k/math-emu/fp_arith.h b/ANDROID_3.4.5/arch/m68k/math-emu/fp_arith.h
deleted file mode 100644
index 2cc3f846..00000000
--- a/ANDROID_3.4.5/arch/m68k/math-emu/fp_arith.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
-
-   fp_arith.h: floating-point math routines for the Linux-m68k
-   floating point emulator.
-
-   Copyright (c) 1998 David Huggins-Daines.
-
-   Somewhat based on the AlphaLinux floating point emulator, by David
-   Mosberger-Tang.
-
-   You may copy, modify, and redistribute this file under the terms of
-   the GNU General Public License, version 2, or any later version, at
-   your convenience.
-
- */
-
-#ifndef FP_ARITH_H
-#define FP_ARITH_H
-
-/* easy ones */
-struct fp_ext *
-fp_fabs(struct fp_ext *dest, struct fp_ext *src);
-struct fp_ext *
-fp_fneg(struct fp_ext *dest, struct fp_ext *src);
-
-/* straightforward arithmetic */
-struct fp_ext *
-fp_fadd(struct fp_ext *dest, struct fp_ext *src);
-struct fp_ext *
-fp_fsub(struct fp_ext *dest, struct fp_ext *src);
-struct fp_ext *
-fp_fcmp(struct fp_ext *dest, struct fp_ext *src);
-struct fp_ext *
-fp_ftst(struct fp_ext *dest, struct fp_ext *src);
-struct fp_ext *
-fp_fmul(struct fp_ext *dest, struct fp_ext *src);
-struct fp_ext *
-fp_fdiv(struct fp_ext *dest, struct fp_ext *src);
-
-/* ones that do rounding and integer conversions */
-struct fp_ext *
-fp_fmod(struct fp_ext *dest, struct fp_ext *src);
-struct fp_ext *
-fp_frem(struct fp_ext *dest, struct fp_ext *src);
-struct fp_ext *
-fp_fint(struct fp_ext *dest, struct fp_ext *src);
-struct fp_ext *
-fp_fintrz(struct fp_ext *dest, struct fp_ext *src);
-struct fp_ext *
-fp_fscale(struct fp_ext *dest, struct fp_ext *src);
-
-#endif	/* FP_ARITH__H */
diff --git a/ANDROID_3.4.5/arch/m68k/math-emu/fp_cond.S b/ANDROID_3.4.5/arch/m68k/math-emu/fp_cond.S
deleted file mode 100644
index ddae8b1b..00000000
--- a/ANDROID_3.4.5/arch/m68k/math-emu/fp_cond.S
+++ /dev/null
@@ -1,334 +0,0 @@
-/*
- * fp_cond.S
- *
- * Copyright Roman Zippel, 1997.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, and the entire permission notice in its entirety,
- *    including the disclaimer of warranties.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. The name of the author may not be used to endorse or promote
- *    products derived from this software without specific prior
- *    written permission.
- *
- * ALTERNATIVELY, this product may be distributed under the terms of
- * the GNU General Public License, in which case the provisions of the GPL are
- * required INSTEAD OF the above restrictions.  (This clause is
- * necessary due to a potential bad interaction between the GPL and
- * the restrictions contained in a BSD-style copyright.)
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
- * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
- * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#include "fp_emu.h"
-#include "fp_decode.h"
-
-	.globl	fp_fscc, fp_fbccw, fp_fbccl
-
-#ifdef FPU_EMU_DEBUG
-fp_fnop:
-	printf	PDECODE,"fnop\n"
-	jra	fp_end
-#else
-#define fp_fnop fp_end
-#endif
-
-fp_fbccw:
-	tst.w	%d2
-	jeq	fp_fnop
-	printf	PDECODE,"fbccw "
-	fp_get_pc %a0
-	lea	(-2,%a0,%d2.w),%a0
-	jra	1f
-
-fp_fbccl:
-	printf	PDECODE,"fbccl "
-	fp_get_pc %a0
-	move.l	%d2,%d0
-	swap	%d0
-	fp_get_instr_word %d0,fp_err_ua1
-	lea	(-2,%a0,%d0.l),%a0
-1:	printf	PDECODE,"%x",1,%a0
-	move.l	%d2,%d0
-	swap	%d0
-	jsr	fp_compute_cond
-	tst.l	%d0
-	jeq	1f
-	fp_put_pc %a0,1
-1:	printf	PDECODE,"\n"
-	jra	fp_end
-
-fp_fdbcc:
-	printf	PDECODE,"fdbcc "
-	fp_get_pc %a1				| calculate new pc
-	fp_get_instr_word %d0,fp_err_ua1
-	add.w	%d0,%a1
-	fp_decode_addr_reg
-	printf	PDECODE,"d%d,%x\n",2,%d0,%a1
-	swap	%d1				| test condition in %d1
-	tst.w	%d1
-	jne	2f
-	move.l	%d0,%d1
-	jsr	fp_get_data_reg
-	subq.w	#1,%d0
-	jcs	1f
-	fp_put_pc %a1,1
-1:	jsr	fp_put_data_reg
-2:	jra	fp_end
-
-| set flags for decode macros for fs<cc>
-do_fscc=1
-do_no_pc_mode=1
-
-fp_fscc:
-	printf	PDECODE,"fscc "
-	move.l	%d2,%d0
-	jsr	fp_compute_cond
-	move.w	%d0,%d1
-	swap	%d1
-
-	| decode addressing mode
-	fp_decode_addr_mode
-
-	.long	fp_data, fp_fdbcc
-	.long	fp_indirect, fp_postinc
-	.long	fp_predecr, fp_disp16
-	.long	fp_extmode0, fp_extmode1
-
-	| addressing mode: data register direct
-fp_data:
-	fp_mode_data_direct
-	move.w	%d0,%d1			| save register nr
-	jsr	fp_get_data_reg
-	swap	%d1
-	move.b	%d1,%d0
-	swap	%d1
-	jsr	fp_put_data_reg
-	printf	PDECODE,"\n"
-	jra	fp_end
-
-fp_indirect:
-	fp_mode_addr_indirect
-	jra	fp_do_scc
-
-fp_postinc:
-	fp_mode_addr_indirect_postinc
-	jra	fp_do_scc
-
-fp_predecr:
-	fp_mode_addr_indirect_predec
-	jra	fp_do_scc
-
-fp_disp16:
-	fp_mode_addr_indirect_disp16
-	jra	fp_do_scc
-
-fp_extmode0:
-	fp_mode_addr_indirect_extmode0
-	jra	fp_do_scc
-
-fp_extmode1:
-	bfextu	%d2{#13,#3},%d0
-	jmp	([0f:w,%pc,%d0*4])
-
-	.align	4
-0:
-	.long	fp_absolute_short, fp_absolute_long
-	.long	fp_ill, fp_ill		| NOTE: jump here to ftrap.x
-	.long	fp_ill, fp_ill
-	.long	fp_ill, fp_ill
-
-fp_absolute_short:
-	fp_mode_abs_short
-	jra	fp_do_scc
-
-fp_absolute_long:
-	fp_mode_abs_long
-|	jra	fp_do_scc
-
-fp_do_scc:
-	swap	%d1
-	putuser.b %d1,(%a0),fp_err_ua1,%a0
-	printf	PDECODE,"\n"
-	jra	fp_end
-
-
-#define tst_NAN	btst #24,%d1
-#define tst_Z	btst #26,%d1
-#define tst_N	btst #27,%d1
-
-fp_compute_cond:
-	move.l	(FPD_FPSR,FPDATA),%d1
-	btst	#4,%d0
-	jeq	1f
-	tst_NAN
-	jeq	1f
-	bset	#15,%d1
-	bset	#7,%d1
-	move.l	%d1,(FPD_FPSR,FPDATA)
-1:	and.w	#0xf,%d0
-	jmp	([0f:w,%pc,%d0.w*4])
-
-	.align	4
-0:
-	.long	fp_f  , fp_eq , fp_ogt, fp_oge
-	.long	fp_olt, fp_ole, fp_ogl, fp_or
-	.long	fp_un , fp_ueq, fp_ugt, fp_uge
-	.long	fp_ult, fp_ule, fp_ne , fp_t
-
-fp_f:
-	moveq	#0,%d0
-	rts
-
-fp_eq:
-	moveq	#0,%d0
-	tst_Z
-	jeq	1f
-	moveq	#-1,%d0
-1:	rts
-
-fp_ogt:
-	moveq	#0,%d0
-	tst_NAN
-	jne	1f
-	tst_Z
-	jne	1f
-	tst_N
-	jne	1f
-	moveq	#-1,%d0
-1:	rts
-
-fp_oge:
-	moveq	#-1,%d0
-	tst_Z
-	jne	2f
-	tst_NAN
-	jne	1f
-	tst_N
-	jeq	2f
-1:	moveq	#0,%d0
-2:	rts
-
-fp_olt:
-	moveq	#0,%d0
-	tst_NAN
-	jne	1f
-	tst_Z
-	jne	1f
-	tst_N
-	jeq	1f
-	moveq	#-1,%d0
-1:	rts
-
-fp_ole:
-	moveq	#-1,%d0
-	tst_Z
-	jne	2f
-	tst_NAN
-	jne	1f
-	tst_N
-	jne	2f
-1:	moveq	#0,%d0
-2:	rts
-
-fp_ogl:
-	moveq	#0,%d0
-	tst_NAN
-	jne	1f
-	tst_Z
-	jne	1f
-	moveq	#-1,%d0
-1:	rts
-
-fp_or:
-	moveq	#0,%d0
-	tst_NAN
-	jne	1f
-	moveq	#-1,%d0
-1:	rts
-
-fp_un:
-	moveq	#0,%d0
-	tst_NAN
-	jeq	1f
-	moveq	#-1,%d0
-	rts
-
-fp_ueq:
-	moveq	#-1,%d0
-	tst_NAN
-	jne	1f
-	tst_Z
-	jne	1f
-	moveq	#0,%d0
-1:	rts
-
-fp_ugt:
-	moveq	#-1,%d0
-	tst_NAN
-	jne	2f
-	tst_N
-	jne	1f
-	tst_Z
-	jeq	2f
-1:	moveq	#0,%d0
-2:	rts
-
-fp_uge:
-	moveq	#-1,%d0
-	tst_NAN
-	jne	1f
-	tst_Z
-	jne	1f
-	tst_N
-	jeq	1f
-	moveq	#0,%d0
-1:	rts
-
-fp_ult:
-	moveq	#-1,%d0
-	tst_NAN
-	jne	2f
-	tst_Z
-	jne	1f
-	tst_N
-	jne	2f
-1:	moveq	#0,%d0
-2:	rts
-
-fp_ule:
-	moveq	#-1,%d0
-	tst_NAN
-	jne	1f
-	tst_Z
-	jne	1f
-	tst_N
-	jne	1f
-	moveq	#0,%d0
-1:	rts
-
-fp_ne:
-	moveq	#0,%d0
-	tst_Z
-	jne	1f
-	moveq	#-1,%d0
-1:	rts
-
-fp_t:
-	moveq	#-1,%d0
-	rts
diff --git a/ANDROID_3.4.5/arch/m68k/math-emu/fp_decode.h b/ANDROID_3.4.5/arch/m68k/math-emu/fp_decode.h
deleted file mode 100644
index 759679d9..00000000
--- a/ANDROID_3.4.5/arch/m68k/math-emu/fp_decode.h
+++ /dev/null
@@ -1,417 +0,0 @@
-/*
- * fp_decode.h
- *
- * Copyright Roman Zippel, 1997.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, and the entire permission notice in its entirety,
- *    including the disclaimer of warranties.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. The name of the author may not be used to endorse or promote
- *    products derived from this software without specific prior
- *    written permission.
- *
- * ALTERNATIVELY, this product may be distributed under the terms of
- * the GNU General Public License, in which case the provisions of the GPL are
- * required INSTEAD OF the above restrictions.  (This clause is
- * necessary due to a potential bad interaction between the GPL and
- * the restrictions contained in a BSD-style copyright.)
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
- * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
- * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#ifndef _FP_DECODE_H
-#define _FP_DECODE_H
-
-/* These macros do the dirty work of the instr decoding, several variables
- * can be defined in the source file to modify the work of these macros,
- * currently the following variables are used:
- * ...
- * The register usage:
- * d0 - will contain source operand for data direct mode,
- *	otherwise scratch register
- * d1 - upper 16bit are reserved for caller
- *	lower 16bit may contain further arguments,
- *	is destroyed during decoding
- * d2 - contains first two instruction words,
- *	first word will be used for extension word
- * a0 - will point to source/dest operand for any indirect mode
- *	otherwise scratch register
- * a1 - scratch register
- * a2 - base addr to the task structure
- *
- * the current implementation doesn't check for every disallowed
- * addressing mode (e.g. pc relative modes as destination), as long
- * as it only means a new addressing mode, which should not appear
- * in a program and that doesn't crash the emulation, I think it's
- * not a problem to allow these modes.
- */
-
-do_fmovem=0
-do_fmovem_cr=0
-do_no_pc_mode=0
-do_fscc=0
-
-| first decoding of the instr type
-| this separates the conditional instr
-.macro	fp_decode_cond_instr_type
-	bfextu	%d2{#8,#2},%d0
-	jmp	([0f:w,%pc,%d0*4])
-
-	.align	4
-0:
-|	.long	"f<op>","fscc/fdbcc"
-|	.long	"fbccw","fbccl"
-.endm
-
-| second decoding of the instr type
-| this separates most move instr
-.macro	fp_decode_move_instr_type
-	bfextu	%d2{#16,#3},%d0
-	jmp	([0f:w,%pc,%d0*4])
-
-	.align	4
-0:
-|	.long	"f<op> fpx,fpx","invalid instr"
-|	.long	"f<op> <ea>,fpx","fmove fpx,<ea>"
-|	.long	"fmovem <ea>,fpcr","fmovem <ea>,fpx"
-|	.long	"fmovem fpcr,<ea>","fmovem fpx,<ea>"
-.endm
-
-| extract the source specifier, specifies
-| either source fp register or data format
-.macro	fp_decode_sourcespec
-	bfextu	%d2{#19,#3},%d0
-.endm
-
-| decode destination format for fmove reg,ea
-.macro	fp_decode_dest_format
-	bfextu	%d2{#19,#3},%d0
-.endm
-
-| decode source register for fmove reg,ea
-.macro	fp_decode_src_reg
-	bfextu	%d2{#22,#3},%d0
-.endm
-
-| extract the addressing mode
-| it depends on the instr which of the modes is valid
-.macro	fp_decode_addr_mode
-	bfextu	%d2{#10,#3},%d0
-	jmp	([0f:w,%pc,%d0*4])
-
-	.align	4
-0:
-|	.long	"data register direct","addr register direct"
-|	.long	"addr register indirect"
-|	.long	"addr register indirect postincrement"
-|	.long	"addr register indirect predecrement"
-|	.long	"addr register + index16"
-|	.long	"extension mode1","extension mode2"
-.endm
-
-| extract the register for the addressing mode
-.macro	fp_decode_addr_reg
-	bfextu	%d2{#13,#3},%d0
-.endm
-
-| decode the 8bit diplacement from the brief extension word
-.macro	fp_decode_disp8
-	move.b	%d2,%d0
-	ext.w	%d0
-.endm
-
-| decode the index of the brief/full extension word
-.macro	fp_decode_index
-	bfextu	%d2{#17,#3},%d0		| get the register nr
-	btst	#15,%d2			| test for data/addr register
-	jne	1\@f
-	printf	PDECODE,"d%d",1,%d0
-	jsr	fp_get_data_reg
-	jra	2\@f
-1\@:	printf	PDECODE,"a%d",1,%d0
-	jsr	fp_get_addr_reg
-	move.l	%a0,%d0
-2\@:
-debug	lea	"'l'.w,%a0"
-	btst	#11,%d2			| 16/32 bit size?
-	jne	3\@f
-debug	lea	"'w'.w,%a0"
-	ext.l	%d0
-3\@:	printf	PDECODE,":%c",1,%a0
-	move.w	%d2,%d1			| scale factor
-	rol.w	#7,%d1
-	and.w	#3,%d1
-debug	move.l	"%d1,-(%sp)"
-debug	ext.l	"%d1"
-	printf	PDECODE,":%d",1,%d1
-debug	move.l	"(%sp)+,%d1"
-	lsl.l	%d1,%d0
-.endm
-
-| decode the base displacement size
-.macro	fp_decode_basedisp
-	bfextu	%d2{#26,#2},%d0
-	jmp	([0f:w,%pc,%d0*4])
-
-	.align	4
-0:
-|	.long	"reserved","null displacement"
-|	.long	"word displacement","long displacement"
-.endm
-
-.macro	fp_decode_outerdisp
-	bfextu	%d2{#30,#2},%d0
-	jmp	([0f:w,%pc,%d0*4])
-
-	.align	4
-0:
-|	.long	"no memory indirect action/reserved","null outer displacement"
-|	.long	"word outer displacement","long outer displacement"
-.endm
-
-| get the extension word and test for brief or full extension type
-.macro	fp_get_test_extword label
-	fp_get_instr_word %d2,fp_err_ua1
-	btst	#8,%d2
-	jne	\label
-.endm
-
-
-| test if %pc is the base register for the indirect addr mode
-.macro	fp_test_basereg_d16	label
-	btst	#20,%d2
-	jeq	\label
-.endm
-
-| test if %pc is the base register for one of the extended modes
-.macro	fp_test_basereg_ext	label
-	btst	#19,%d2
-	jeq	\label
-.endm
-
-.macro	fp_test_suppr_index label
-	btst	#6,%d2
-	jne	\label
-.endm
-
-
-| addressing mode: data register direct
-.macro	fp_mode_data_direct
-	fp_decode_addr_reg
-	printf	PDECODE,"d%d",1,%d0
-.endm
-
-| addressing mode: address register indirect
-.macro	fp_mode_addr_indirect
-	fp_decode_addr_reg
-	printf	PDECODE,"(a%d)",1,%d0
-	jsr	fp_get_addr_reg
-.endm
-
-| adjust stack for byte moves from/to stack
-.macro	fp_test_sp_byte_move
-	.if	!do_fmovem
-	.if	do_fscc
-	move.w	#6,%d1
-	.endif
-	cmp.w	#7,%d0
-	jne	1\@f
-	.if	!do_fscc
-	cmp.w	#6,%d1
-	jne	1\@f
-	.endif
-	move.w	#4,%d1
-1\@:
-	.endif
-.endm
-
-| addressing mode: address register indirect with postincrement
-.macro	fp_mode_addr_indirect_postinc
-	fp_decode_addr_reg
-	printf	PDECODE,"(a%d)+",1,%d0
-	fp_test_sp_byte_move
-	jsr	fp_get_addr_reg
-	move.l	%a0,%a1			| save addr
-	.if	do_fmovem
-	lea	(%a0,%d1.w*4),%a0
-	.if	!do_fmovem_cr
-	lea	(%a0,%d1.w*8),%a0
-	.endif
-	.else
-	add.w	(fp_datasize,%d1.w*2),%a0
-	.endif
-	jsr	fp_put_addr_reg
-	move.l	%a1,%a0
-.endm
-
-| addressing mode: address register indirect with predecrement
-.macro	fp_mode_addr_indirect_predec
-	fp_decode_addr_reg
-	printf	PDECODE,"-(a%d)",1,%d0
-	fp_test_sp_byte_move
-	jsr	fp_get_addr_reg
-	.if	do_fmovem
-	.if	!do_fmovem_cr
-	lea	(-12,%a0),%a1		| setup to addr of 1st reg to move
-	neg.w	%d1
-	lea	(%a0,%d1.w*4),%a0
-	add.w	%d1,%d1
-	lea	(%a0,%d1.w*4),%a0
-	jsr	fp_put_addr_reg
-	move.l	%a1,%a0
-	.else
-	neg.w	%d1
-	lea	(%a0,%d1.w*4),%a0
-	jsr	fp_put_addr_reg
-	.endif
-	.else
-	sub.w	(fp_datasize,%d1.w*2),%a0
-	jsr	fp_put_addr_reg
-	.endif
-.endm
-
-| addressing mode: address register/programm counter indirect
-|		   with 16bit displacement
-.macro	fp_mode_addr_indirect_disp16
-	.if	!do_no_pc_mode
-	fp_test_basereg_d16 1f
-	printf	PDECODE,"pc"
-	fp_get_pc %a0
-	jra	2f
-	.endif
-1:	fp_decode_addr_reg
-	printf	PDECODE,"a%d",1,%d0
-	jsr	fp_get_addr_reg
-2:	fp_get_instr_word %a1,fp_err_ua1
-	printf	PDECODE,"@(%x)",1,%a1
-	add.l	%a1,%a0
-.endm
-
-| perform preindex (if I/IS == 0xx and xx != 00)
-.macro	fp_do_preindex
-	moveq	#3,%d0
-	and.w	%d2,%d0
-	jeq	1f
-	btst	#2,%d2
-	jne	1f
-	printf	PDECODE,")@("
-	getuser.l (%a1),%a1,fp_err_ua1,%a1
-debug	jra	"2f"
-1:	printf	PDECODE,","
-2:
-.endm
-
-| perform postindex (if I/IS == 1xx)
-.macro	fp_do_postindex
-	btst	#2,%d2
-	jeq	1f
-	printf	PDECODE,")@("
-	getuser.l (%a1),%a1,fp_err_ua1,%a1
-debug	jra	"2f"
-1:	printf	PDECODE,","
-2:
-.endm
-
-| all other indirect addressing modes will finally end up here
-.macro	fp_mode_addr_indirect_extmode0
-	.if	!do_no_pc_mode
-	fp_test_basereg_ext 1f
-	printf	PDECODE,"pc"
-	fp_get_pc %a0
-	jra	2f
-	.endif
-1:	fp_decode_addr_reg
-	printf	PDECODE,"a%d",1,%d0
-	jsr	fp_get_addr_reg
-2:	move.l	%a0,%a1
-	swap	%d2
-	fp_get_test_extword 3f
-	| addressing mode: address register/programm counter indirect
-	|		   with index and 8bit displacement
-	fp_decode_disp8
-debug	ext.l	"%d0"
-	printf	PDECODE,"@(%x,",1,%d0
-	add.w	%d0,%a1
-	fp_decode_index
-	add.l	%d0,%a1
-	printf	PDECODE,")"
-	jra	9f
-3:	| addressing mode: address register/programm counter memory indirect
-	|		   with base and/or outer displacement
-	btst	#7,%d2			| base register suppressed?
-	jeq	1f
-	printf	PDECODE,"!"
-	sub.l	%a1,%a1
-1:	printf	PDECODE,"@("
-	fp_decode_basedisp
-
-	.long	fp_ill,1f
-	.long	2f,3f
-
-#ifdef FPU_EMU_DEBUG
-1:	printf	PDECODE,"0"		| null base displacement
-	jra	1f
-#endif
-2:	fp_get_instr_word %a0,fp_err_ua1 | 16bit base displacement
-	printf	PDECODE,"%x:w",1,%a0
-	jra	4f
-3:	fp_get_instr_long %a0,fp_err_ua1 | 32bit base displacement
-	printf	PDECODE,"%x:l",1,%a0
-4:	add.l	%a0,%a1
-1:
-	fp_do_postindex
-	fp_test_suppr_index 1f
-	fp_decode_index
-	add.l	%d0,%a1
-1:	fp_do_preindex
-
-	fp_decode_outerdisp
-
-	.long	5f,1f
-	.long	2f,3f
-
-#ifdef FPU_EMU_DEBUG
-1:	printf	PDECODE,"0"		| null outer displacement
-	jra	1f
-#endif
-2:	fp_get_instr_word %a0,fp_err_ua1 | 16bit outer displacement
-	printf	PDECODE,"%x:w",1,%a0
-	jra	4f
-3:	fp_get_instr_long %a0,fp_err_ua1 | 32bit outer displacement
-	printf	PDECODE,"%x:l",1,%a0
-4:	add.l	%a0,%a1
-1:
-5:	printf	PDECODE,")"
-9:	move.l	%a1,%a0
-	swap	%d2
-.endm
-
-| get the absolute short address from user space
-.macro	fp_mode_abs_short
-	fp_get_instr_word %a0,fp_err_ua1
-	printf	PDECODE,"%x.w",1,%a0
-.endm
-
-| get the absolute long address from user space
-.macro	fp_mode_abs_long
-	fp_get_instr_long %a0,fp_err_ua1
-	printf	PDECODE,"%x.l",1,%a0
-.endm
-
-#endif /* _FP_DECODE_H */
diff --git a/ANDROID_3.4.5/arch/m68k/math-emu/fp_emu.h b/ANDROID_3.4.5/arch/m68k/math-emu/fp_emu.h
deleted file mode 100644
index c1ecfef7..00000000
--- a/ANDROID_3.4.5/arch/m68k/math-emu/fp_emu.h
+++ /dev/null
@@ -1,146 +0,0 @@
-/*
- * fp_emu.h
- *
- * Copyright Roman Zippel, 1997.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, and the entire permission notice in its entirety,
- *    including the disclaimer of warranties.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. The name of the author may not be used to endorse or promote
- *    products derived from this software without specific prior
- *    written permission.
- *
- * ALTERNATIVELY, this product may be distributed under the terms of
- * the GNU General Public License, in which case the provisions of the GPL are
- * required INSTEAD OF the above restrictions.  (This clause is
- * necessary due to a potential bad interaction between the GPL and
- * the restrictions contained in a BSD-style copyright.)
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
- * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
- * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#ifndef _FP_EMU_H
-#define _FP_EMU_H
-
-#ifdef __ASSEMBLY__
-#include <asm/asm-offsets.h>
-#endif
-#include <asm/math-emu.h>
-
-#ifndef __ASSEMBLY__
-
-#define IS_INF(a) ((a)->exp == 0x7fff)
-#define IS_ZERO(a) ((a)->mant.m64 == 0)
-
-
-#define fp_set_sr(bit) ({					\
-	FPDATA->fpsr |= 1 << (bit);				\
-})
-
-#define fp_set_quotient(quotient) ({				\
-	FPDATA->fpsr &= 0xff00ffff;				\
-	FPDATA->fpsr |= ((quotient) & 0xff) << 16;		\
-})
-
-/* linkage for several useful functions */
-
-/* Normalize the extended struct, return 0 for a NaN */
-#define fp_normalize_ext(fpreg) ({				\
-	register struct fp_ext *reg asm ("a0") = fpreg;		\
-	register int res asm ("d0");				\
-								\
-	asm volatile ("jsr fp_conv_ext2ext"			\
-			: "=d" (res) : "a" (reg)		\
-			: "a1", "d1", "d2", "memory");		\
-	res;							\
-})
-
-#define fp_copy_ext(dest, src) ({				\
-	*dest = *src;						\
-})
-
-#define fp_monadic_check(dest, src) ({				\
-	fp_copy_ext(dest, src);					\
-	if (!fp_normalize_ext(dest))				\
-		return dest;					\
-})
-
-#define fp_dyadic_check(dest, src) ({				\
-	if (!fp_normalize_ext(dest))				\
-		return dest;					\
-	if (!fp_normalize_ext(src)) {				\
-		fp_copy_ext(dest, src);				\
-		return dest;					\
-	}							\
-})
-
-extern const struct fp_ext fp_QNaN;
-extern const struct fp_ext fp_Inf;
-
-#define fp_set_nan(dest) ({					\
-	fp_set_sr(FPSR_EXC_OPERR);				\
-	*dest = fp_QNaN;					\
-})
-
-/* TODO check rounding mode? */
-#define fp_set_ovrflw(dest) ({					\
-	fp_set_sr(FPSR_EXC_OVFL);				\
-	dest->exp = 0x7fff;					\
-	dest->mant.m64 = 0;					\
-})
-
-#define fp_conv_ext2long(src) ({				\
-	register struct fp_ext *__src asm ("a0") = src;		\
-	register int __res asm ("d0");				\
-								\
-	asm volatile ("jsr fp_conv_ext2long"			\
-			: "=d" (__res) : "a" (__src)		\
-			: "a1", "d1", "d2", "memory");		\
-	__res;							\
-})
-
-#define fp_conv_long2ext(dest, src) ({				\
-	register struct fp_ext *__dest asm ("a0") = dest;	\
-	register int __src asm ("d0") = src;			\
-								\
-	asm volatile ("jsr fp_conv_ext2long"			\
-			: : "d" (__src), "a" (__dest)		\
-			: "a1", "d1", "d2", "memory");		\
-})
-
-#else /* __ASSEMBLY__ */
-
-/*
- * set, reset or clear a bit in the fp status register
- */
-.macro	fp_set_sr	bit
-	bset	#(\bit&7),(FPD_FPSR+3-(\bit/8),FPDATA)
-.endm
-
-.macro	fp_clr_sr	bit
-	bclr	#(\bit&7),(FPD_FPSR+3-(\bit/8),FPDATA)
-.endm
-
-.macro	fp_tst_sr	bit
-	btst	#(\bit&7),(FPD_FPSR+3-(\bit/8),FPDATA)
-.endm
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* _FP_EMU_H */
diff --git a/ANDROID_3.4.5/arch/m68k/math-emu/fp_entry.S b/ANDROID_3.4.5/arch/m68k/math-emu/fp_entry.S
deleted file mode 100644
index a3fe1f34..00000000
--- a/ANDROID_3.4.5/arch/m68k/math-emu/fp_entry.S
+++ /dev/null
@@ -1,324 +0,0 @@
-/*
- * fp_emu.S
- *
- * Copyright Roman Zippel, 1997.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, and the entire permission notice in its entirety,
- *    including the disclaimer of warranties.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. The name of the author may not be used to endorse or promote
- *    products derived from this software without specific prior
- *    written permission.
- *
- * ALTERNATIVELY, this product may be distributed under the terms of
- * the GNU General Public License, in which case the provisions of the GPL are
- * required INSTEAD OF the above restrictions.  (This clause is
- * necessary due to a potential bad interaction between the GPL and
- * the restrictions contained in a BSD-style copyright.)
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
- * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
- * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#include <linux/linkage.h>
-#include <asm/entry.h>
-
-#include "fp_emu.h"
-
-	.globl	fpu_emu
-	.globl	fp_debugprint
-	.globl	fp_err_ua1,fp_err_ua2
-
-	.text
-fpu_emu:
-	SAVE_ALL_INT
-	GET_CURRENT(%d0)
-
-#if defined(CPU_M68020_OR_M68030) && defined(CPU_M68040_OR_M68060)
-        tst.l	m68k_is040or060
-        jeq	1f
-#endif
-#if defined(CPU_M68040_OR_M68060)
-	move.l	(FPS_PC2,%sp),(FPS_PC,%sp)
-#endif
-1:
-	| emulate the instruction
-	jsr	fp_scan
-
-#if defined(CONFIG_M68060)
-#if !defined(CPU_M68060_ONLY)
-	btst	#3,m68k_cputype+3
-	jeq	1f
-#endif
-	btst	#7,(FPS_SR,%sp)
-	jne	fp_sendtrace060
-#endif
-1:
-	| emulation successful?
-	tst.l	%d0
-	jeq	ret_from_exception
-
-	| send some signal to program here
-
-	jra	ret_from_exception
-
-	| we jump here after an access error while trying to access
-	| user space, we correct stackpointer and send a SIGSEGV to
-	| the user process
-fp_err_ua2:
-	addq.l	#4,%sp
-fp_err_ua1:
-	addq.l	#4,%sp
-	move.l	%a0,-(%sp)
-	pea	LSEGV_MAPERR
-	pea	LSIGSEGV
-	jsr	fpemu_signal
-	add.w	#12,%sp
-	jra	ret_from_exception
-
-#if defined(CONFIG_M68060)
-	| send a trace signal if we are debugged
-	| it does not really belong here, but...
-fp_sendtrace060:
-	move.l	(FPS_PC,%sp),-(%sp)
-	pea	LTRAP_TRACE
-	pea	LSIGTRAP
-	jsr	fpemu_signal
-	add.w	#12,%sp
-	jra	ret_from_exception
-#endif
-
-	.globl	fp_get_data_reg, fp_put_data_reg
-	.globl	fp_get_addr_reg, fp_put_addr_reg
-
-	| Entry points to get/put a register. Some of them can be get/put
-	| directly, others are on the stack, as we read/write the stack
-	| directly here, these function may only be called from within
-	| instruction decoding, otherwise the stack pointer is incorrect
-	| and the stack gets corrupted.
-fp_get_data_reg:
-	jmp	([0f:w,%pc,%d0.w*4])
-
-	.align	4
-0:
-	.long	fp_get_d0, fp_get_d1
-	.long	fp_get_d2, fp_get_d3
-	.long	fp_get_d4, fp_get_d5
-	.long	fp_get_d6, fp_get_d7
-
-fp_get_d0:
-	move.l	(PT_OFF_D0+8,%sp),%d0
-	printf	PREGISTER,"{d0->%08x}",1,%d0
-	rts
-
-fp_get_d1:
-	move.l	(PT_OFF_D1+8,%sp),%d0
-	printf	PREGISTER,"{d1->%08x}",1,%d0
-	rts
-
-fp_get_d2:
-	move.l	(PT_OFF_D2+8,%sp),%d0
-	printf	PREGISTER,"{d2->%08x}",1,%d0
-	rts
-
-fp_get_d3:
-	move.l	%d3,%d0
-	printf	PREGISTER,"{d3->%08x}",1,%d0
-	rts
-
-fp_get_d4:
-	move.l	%d4,%d0
-	printf	PREGISTER,"{d4->%08x}",1,%d0
-	rts
-
-fp_get_d5:
-	move.l	%d5,%d0
-	printf	PREGISTER,"{d5->%08x}",1,%d0
-	rts
-
-fp_get_d6:
-	move.l	%d6,%d0
-	printf	PREGISTER,"{d6->%08x}",1,%d0
-	rts
-
-fp_get_d7:
-	move.l	%d7,%d0
-	printf	PREGISTER,"{d7->%08x}",1,%d0
-	rts
-
-fp_put_data_reg:
-	jmp	([0f:w,%pc,%d1.w*4])
-
-	.align	4
-0:
-	.long	fp_put_d0, fp_put_d1
-	.long	fp_put_d2, fp_put_d3
-	.long	fp_put_d4, fp_put_d5
-	.long	fp_put_d6, fp_put_d7
-
-fp_put_d0:
-	printf	PREGISTER,"{d0<-%08x}",1,%d0
-	move.l	%d0,(PT_OFF_D0+8,%sp)
-	rts
-
-fp_put_d1:
-	printf	PREGISTER,"{d1<-%08x}",1,%d0
-	move.l	%d0,(PT_OFF_D1+8,%sp)
-	rts
-
-fp_put_d2:
-	printf	PREGISTER,"{d2<-%08x}",1,%d0
-	move.l	%d0,(PT_OFF_D2+8,%sp)
-	rts
-
-fp_put_d3:
-	printf	PREGISTER,"{d3<-%08x}",1,%d0
-|	move.l	%d0,%d3
-	move.l	%d0,(PT_OFF_D3+8,%sp)
-	rts
-
-fp_put_d4:
-	printf	PREGISTER,"{d4<-%08x}",1,%d0
-|	move.l	%d0,%d4
-	move.l	%d0,(PT_OFF_D4+8,%sp)
-	rts
-
-fp_put_d5:
-	printf	PREGISTER,"{d5<-%08x}",1,%d0
-|	move.l	%d0,%d5
-	move.l	%d0,(PT_OFF_D5+8,%sp)
-	rts
-
-fp_put_d6:
-	printf	PREGISTER,"{d6<-%08x}",1,%d0
-	move.l	%d0,%d6
-	rts
-
-fp_put_d7:
-	printf	PREGISTER,"{d7<-%08x}",1,%d0
-	move.l	%d0,%d7
-	rts
-
-fp_get_addr_reg:
-	jmp	([0f:w,%pc,%d0.w*4])
-
-	.align	4
-0:
-	.long	fp_get_a0, fp_get_a1
-	.long	fp_get_a2, fp_get_a3
-	.long	fp_get_a4, fp_get_a5
-	.long	fp_get_a6, fp_get_a7
-
-fp_get_a0:
-	move.l	(PT_OFF_A0+8,%sp),%a0
-	printf	PREGISTER,"{a0->%08x}",1,%a0
-	rts
-
-fp_get_a1:
-	move.l	(PT_OFF_A1+8,%sp),%a0
-	printf	PREGISTER,"{a1->%08x}",1,%a0
-	rts
-
-fp_get_a2:
-	move.l	(PT_OFF_A2+8,%sp),%a0
-	printf	PREGISTER,"{a2->%08x}",1,%a0
-	rts
-
-fp_get_a3:
-	move.l	%a3,%a0
-	printf	PREGISTER,"{a3->%08x}",1,%a0
-	rts
-
-fp_get_a4:
-	move.l	%a4,%a0
-	printf	PREGISTER,"{a4->%08x}",1,%a0
-	rts
-
-fp_get_a5:
-	move.l	%a5,%a0
-	printf	PREGISTER,"{a5->%08x}",1,%a0
-	rts
-
-fp_get_a6:
-	move.l	%a6,%a0
-	printf	PREGISTER,"{a6->%08x}",1,%a0
-	rts
-
-fp_get_a7:
-	move.l	%usp,%a0
-	printf	PREGISTER,"{a7->%08x}",1,%a0
-	rts
-
-fp_put_addr_reg:
-	jmp	([0f:w,%pc,%d0.w*4])
-
-	.align	4
-0:
-	.long	fp_put_a0, fp_put_a1
-	.long	fp_put_a2, fp_put_a3
-	.long	fp_put_a4, fp_put_a5
-	.long	fp_put_a6, fp_put_a7
-
-fp_put_a0:
-	printf	PREGISTER,"{a0<-%08x}",1,%a0
-	move.l	%a0,(PT_OFF_A0+8,%sp)
-	rts
-
-fp_put_a1:
-	printf	PREGISTER,"{a1<-%08x}",1,%a0
-	move.l	%a0,(PT_OFF_A1+8,%sp)
-	rts
-
-fp_put_a2:
-	printf	PREGISTER,"{a2<-%08x}",1,%a0
-	move.l	%a0,(PT_OFF_A2+8,%sp)
-	rts
-
-fp_put_a3:
-	printf	PREGISTER,"{a3<-%08x}",1,%a0
-	move.l	%a0,%a3
-	rts
-
-fp_put_a4:
-	printf	PREGISTER,"{a4<-%08x}",1,%a0
-	move.l	%a0,%a4
-	rts
-
-fp_put_a5:
-	printf	PREGISTER,"{a5<-%08x}",1,%a0
-	move.l	%a0,%a5
-	rts
-
-fp_put_a6:
-	printf	PREGISTER,"{a6<-%08x}",1,%a0
-	move.l	%a0,%a6
-	rts
-
-fp_put_a7:
-	printf	PREGISTER,"{a7<-%08x}",1,%a0
-	move.l	%a0,%usp
-	rts
-
-	.data
-	.align	4
-
-fp_debugprint:
-|	.long	PMDECODE
-	.long	PMINSTR+PMDECODE+PMCONV+PMNORM
-|	.long	PMCONV+PMNORM+PMINSTR
-|	.long	0
diff --git a/ANDROID_3.4.5/arch/m68k/math-emu/fp_log.c b/ANDROID_3.4.5/arch/m68k/math-emu/fp_log.c
deleted file mode 100644
index 3384a524..00000000
--- a/ANDROID_3.4.5/arch/m68k/math-emu/fp_log.c
+++ /dev/null
@@ -1,219 +0,0 @@
-/*
-
-  fp_trig.c: floating-point math routines for the Linux-m68k
-  floating point emulator.
-
-  Copyright (c) 1998-1999 David Huggins-Daines / Roman Zippel.
-
-  I hereby give permission, free of charge, to copy, modify, and
-  redistribute this software, in source or binary form, provided that
-  the above copyright notice and the following disclaimer are included
-  in all such copies.
-
-  THIS SOFTWARE IS PROVIDED "AS IS", WITH ABSOLUTELY NO WARRANTY, REAL
-  OR IMPLIED.
-
-*/
-
-#include "fp_emu.h"
-
-static const struct fp_ext fp_one =
-{
-	.exp = 0x3fff,
-};
-
-extern struct fp_ext *fp_fadd(struct fp_ext *dest, const struct fp_ext *src);
-extern struct fp_ext *fp_fdiv(struct fp_ext *dest, const struct fp_ext *src);
-
-struct fp_ext *
-fp_fsqrt(struct fp_ext *dest, struct fp_ext *src)
-{
-	struct fp_ext tmp, src2;
-	int i, exp;
-
-	dprint(PINSTR, "fsqrt\n");
-
-	fp_monadic_check(dest, src);
-
-	if (IS_ZERO(dest))
-		return dest;
-
-	if (dest->sign) {
-		fp_set_nan(dest);
-		return dest;
-	}
-	if (IS_INF(dest))
-		return dest;
-
-	/*
-	 *		 sqrt(m) * 2^(p)	, if e = 2*p
-	 * sqrt(m*2^e) =
-	 *		 sqrt(2*m) * 2^(p)	, if e = 2*p + 1
-	 *
-	 * So we use the last bit of the exponent to decide wether to
-	 * use the m or 2*m.
-	 *
-	 * Since only the fractional part of the mantissa is stored and
-	 * the integer part is assumed to be one, we place a 1 or 2 into
-	 * the fixed point representation.
-	 */
-	exp = dest->exp;
-	dest->exp = 0x3FFF;
-	if (!(exp & 1))		/* lowest bit of exponent is set */
-		dest->exp++;
-	fp_copy_ext(&src2, dest);
-
-	/*
-	 * The taylor row around a for sqrt(x) is:
-	 *	sqrt(x) = sqrt(a) + 1/(2*sqrt(a))*(x-a) + R
-	 * With a=1 this gives:
-	 *	sqrt(x) = 1 + 1/2*(x-1)
-	 *		= 1/2*(1+x)
-	 */
-	fp_fadd(dest, &fp_one);
-	dest->exp--;		/* * 1/2 */
-
-	/*
-	 * We now apply the newton rule to the function
-	 *	f(x) := x^2 - r
-	 * which has a null point on x = sqrt(r).
-	 *
-	 * It gives:
-	 *	x' := x - f(x)/f'(x)
-	 *	    = x - (x^2 -r)/(2*x)
-	 *	    = x - (x - r/x)/2
-	 *          = (2*x - x + r/x)/2
-	 *	    = (x + r/x)/2
-	 */
-	for (i = 0; i < 9; i++) {
-		fp_copy_ext(&tmp, &src2);
-
-		fp_fdiv(&tmp, dest);
-		fp_fadd(dest, &tmp);
-		dest->exp--;
-	}
-
-	dest->exp += (exp - 0x3FFF) / 2;
-
-	return dest;
-}
-
-struct fp_ext *
-fp_fetoxm1(struct fp_ext *dest, struct fp_ext *src)
-{
-	uprint("fetoxm1\n");
-
-	fp_monadic_check(dest, src);
-
-	return dest;
-}
-
-struct fp_ext *
-fp_fetox(struct fp_ext *dest, struct fp_ext *src)
-{
-	uprint("fetox\n");
-
-	fp_monadic_check(dest, src);
-
-	return dest;
-}
-
-struct fp_ext *
-fp_ftwotox(struct fp_ext *dest, struct fp_ext *src)
-{
-	uprint("ftwotox\n");
-
-	fp_monadic_check(dest, src);
-
-	return dest;
-}
-
-struct fp_ext *
-fp_ftentox(struct fp_ext *dest, struct fp_ext *src)
-{
-	uprint("ftentox\n");
-
-	fp_monadic_check(dest, src);
-
-	return dest;
-}
-
-struct fp_ext *
-fp_flogn(struct fp_ext *dest, struct fp_ext *src)
-{
-	uprint("flogn\n");
-
-	fp_monadic_check(dest, src);
-
-	return dest;
-}
-
-struct fp_ext *
-fp_flognp1(struct fp_ext *dest, struct fp_ext *src)
-{
-	uprint("flognp1\n");
-
-	fp_monadic_check(dest, src);
-
-	return dest;
-}
-
-struct fp_ext *
-fp_flog10(struct fp_ext *dest, struct fp_ext *src)
-{
-	uprint("flog10\n");
-
-	fp_monadic_check(dest, src);
-
-	return dest;
-}
-
-struct fp_ext *
-fp_flog2(struct fp_ext *dest, struct fp_ext *src)
-{
-	uprint("flog2\n");
-
-	fp_monadic_check(dest, src);
-
-	return dest;
-}
-
-struct fp_ext *
-fp_fgetexp(struct fp_ext *dest, struct fp_ext *src)
-{
-	dprint(PINSTR, "fgetexp\n");
-
-	fp_monadic_check(dest, src);
-
-	if (IS_INF(dest)) {
-		fp_set_nan(dest);
-		return dest;
-	}
-	if (IS_ZERO(dest))
-		return dest;
-
-	fp_conv_long2ext(dest, (int)dest->exp - 0x3FFF);
-
-	fp_normalize_ext(dest);
-
-	return dest;
-}
-
-struct fp_ext *
-fp_fgetman(struct fp_ext *dest, struct fp_ext *src)
-{
-	dprint(PINSTR, "fgetman\n");
-
-	fp_monadic_check(dest, src);
-
-	if (IS_ZERO(dest))
-		return dest;
-
-	if (IS_INF(dest))
-		return dest;
-
-	dest->exp = 0x3FFF;
-
-	return dest;
-}
-
diff --git a/ANDROID_3.4.5/arch/m68k/math-emu/fp_move.S b/ANDROID_3.4.5/arch/m68k/math-emu/fp_move.S
deleted file mode 100644
index 71bdf83b..00000000
--- a/ANDROID_3.4.5/arch/m68k/math-emu/fp_move.S
+++ /dev/null
@@ -1,244 +0,0 @@
-/*
- * fp_move.S
- *
- * Copyright Roman Zippel, 1997.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, and the entire permission notice in its entirety,
- *    including the disclaimer of warranties.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. The name of the author may not be used to endorse or promote
- *    products derived from this software without specific prior
- *    written permission.
- *
- * ALTERNATIVELY, this product may be distributed under the terms of
- * the GNU General Public License, in which case the provisions of the GPL are
- * required INSTEAD OF the above restrictions.  (This clause is
- * necessary due to a potential bad interaction between the GPL and
- * the restrictions contained in a BSD-style copyright.)
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
- * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
- * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#include "fp_emu.h"
-#include "fp_decode.h"
-
-do_no_pc_mode=1
-
-	.globl	fp_fmove_fp2mem
-
-fp_fmove_fp2mem:
-	clr.b	(2+FPD_FPSR,FPDATA)
-	fp_decode_dest_format
-	move.w	%d0,%d1			| store data size twice in %d1
-	swap	%d1			| one can be trashed below
-	move.w	%d0,%d1
-#ifdef FPU_EMU_DEBUG
-	lea	0f,%a0
-	clr.l	%d0
-	move.b	(%a0,%d1.w),%d0
-	printf	PDECODE,"fmove.%c ",1,%d0
-	fp_decode_src_reg
-	printf	PDECODE,"fp%d,",1,%d0
-
-	.data
-0:	.byte	'l','s','x','p','w','d','b','p'
-	.previous
-#endif
-
-	| encode addressing mode for dest
-	fp_decode_addr_mode
-
-	.long	fp_data, fp_ill
-	.long	fp_indirect, fp_postinc
-	.long	fp_predecr, fp_disp16
-	.long	fp_extmode0, fp_extmode1
-
-	| addressing mode: data register direct
-fp_data:
-	fp_mode_data_direct
-	move.w	%d0,%d1
-	fp_decode_src_reg
-	fp_get_fp_reg
-	lea	(FPD_TEMPFP1,FPDATA),%a1
-	move.l	(%a0)+,(%a1)+
-	move.l	(%a0)+,(%a1)+
-	move.l	(%a0),(%a1)
-	lea	(-8,%a1),%a0
-	swap	%d1
-	move.l	%d1,%d2
-	printf	PDECODE,"\n"
-	jmp	([0f:w,%pc,%d1.w*4])
-
-	.align	4
-0:
-	.long	fp_data_long, fp_data_single
-	.long	fp_ill, fp_ill
-	.long	fp_data_word, fp_ill
-	.long	fp_data_byte, fp_ill
-
-fp_data_byte:
-	jsr	fp_normalize_ext
-	jsr	fp_conv_ext2byte
-	move.l	%d0,%d1
-	swap	%d2
-	move.w	%d2,%d0
-	jsr	fp_get_data_reg
-	move.b	%d1,%d0
-	move.w	%d2,%d1
-	jsr	fp_put_data_reg
-	jra	fp_final
-
-fp_data_word:
-	jsr	fp_normalize_ext
-	jsr	fp_conv_ext2short
-	move.l	%d0,%d1
-	swap	%d2
-	move.w	%d2,%d0
-	jsr	fp_get_data_reg
-	move.w	%d1,%d0
-	move.l	%d2,%d1
-	jsr	fp_put_data_reg
-	jra	fp_final
-
-fp_data_long:
-	jsr	fp_normalize_ext
-	jsr	fp_conv_ext2long
-	swap	%d2
-	move.w	%d2,%d1
-	jsr	fp_put_data_reg
-	jra	fp_final
-
-fp_data_single:
-	jsr	fp_normalize_ext
-	jsr	fp_conv_ext2single
-	swap	%d2
-	move.w	%d2,%d1
-	jsr	fp_put_data_reg
-	jra	fp_final
-
-	| addressing mode: address register indirect
-fp_indirect:
-	fp_mode_addr_indirect
-	jra	fp_putdest
-
-	| addressing mode: address register indirect with postincrement
-fp_postinc:
-	fp_mode_addr_indirect_postinc
-	jra	fp_putdest
-
-	| addressing mode: address register indirect with predecrement
-fp_predecr:
-	fp_mode_addr_indirect_predec
-	jra	fp_putdest
-
-	| addressing mode: address register indirect with 16bit displacement
-fp_disp16:
-	fp_mode_addr_indirect_disp16
-	jra     fp_putdest
-
-fp_extmode0:
-	fp_mode_addr_indirect_extmode0
-	jra	fp_putdest
-
-fp_extmode1:
-	fp_decode_addr_reg
-	jmp	([0f:w,%pc,%d0*4])
-
-	.align	4
-0:
-	.long	fp_abs_short, fp_abs_long
-	.long	fp_ill, fp_ill
-	.long	fp_ill, fp_ill
-	.long	fp_ill, fp_ill
-
-fp_abs_short:
-	fp_mode_abs_short
-	jra	fp_putdest
-
-fp_abs_long:
-	fp_mode_abs_long
-	jra	fp_putdest
-
-fp_putdest:
-	move.l	%a0,%a1
-	fp_decode_src_reg
-	move.l	%d1,%d2			| save size
-	fp_get_fp_reg
-	printf	PDECODE,"\n"
-	addq.l	#8,%a0
-	move.l	(%a0),-(%sp)
-	move.l	-(%a0),-(%sp)
-	move.l	-(%a0),-(%sp)
-	move.l	%sp,%a0
-	jsr	fp_normalize_ext
-
-	swap	%d2
-	jmp	([0f:w,%pc,%d2.w*4])
-
-	.align	4
-0:
-	.long	fp_format_long, fp_format_single
-	.long	fp_format_extended, fp_format_packed
-	.long	fp_format_word, fp_format_double
-	.long	fp_format_byte, fp_format_packed
-
-fp_format_long:
-	jsr	fp_conv_ext2long
-	putuser.l %d0,(%a1),fp_err_ua1,%a1
-	jra	fp_finish_move
-
-fp_format_single:
-	jsr	fp_conv_ext2single
-	putuser.l %d0,(%a1),fp_err_ua1,%a1
-	jra	fp_finish_move
-
-fp_format_extended:
-	move.l	(%a0)+,%d0
-	lsl.w	#1,%d0
-	lsl.l	#7,%d0
-	lsl.l	#8,%d0
-	putuser.l %d0,(%a1)+,fp_err_ua1,%a1
-	move.l	(%a0)+,%d0
-	putuser.l %d0,(%a1)+,fp_err_ua1,%a1
-	move.l	(%a0),%d0
-	putuser.l %d0,(%a1),fp_err_ua1,%a1
-	jra	fp_finish_move
-
-fp_format_packed:
-	/* not supported yet */
-	lea	(12,%sp),%sp
-	jra	fp_ill
-
-fp_format_word:
-	jsr	fp_conv_ext2short
-	putuser.w %d0,(%a1),fp_err_ua1,%a1
-	jra	fp_finish_move
-
-fp_format_double:
-	jsr	fp_conv_ext2double
-	jra	fp_finish_move
-
-fp_format_byte:
-	jsr	fp_conv_ext2byte
-	putuser.b %d0,(%a1),fp_err_ua1,%a1
-|	jra	fp_finish_move
-
-fp_finish_move:
-	lea	(12,%sp),%sp
-	jra	fp_final
diff --git a/ANDROID_3.4.5/arch/m68k/math-emu/fp_movem.S b/ANDROID_3.4.5/arch/m68k/math-emu/fp_movem.S
deleted file mode 100644
index 8354d39e..00000000
--- a/ANDROID_3.4.5/arch/m68k/math-emu/fp_movem.S
+++ /dev/null
@@ -1,368 +0,0 @@
-/*
- * fp_movem.S
- *
- * Copyright Roman Zippel, 1997.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, and the entire permission notice in its entirety,
- *    including the disclaimer of warranties.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. The name of the author may not be used to endorse or promote
- *    products derived from this software without specific prior
- *    written permission.
- *
- * ALTERNATIVELY, this product may be distributed under the terms of
- * the GNU General Public License, in which case the provisions of the GPL are
- * required INSTEAD OF the above restrictions.  (This clause is
- * necessary due to a potential bad interaction between the GPL and
- * the restrictions contained in a BSD-style copyright.)
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
- * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
- * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#include "fp_emu.h"
-#include "fp_decode.h"
-
-| set flags for decode macros for fmovem
-do_fmovem=1
-
-	.globl	fp_fmovem_fp, fp_fmovem_cr
-
-| %d1 contains the mask and count of the register list
-| for other register usage see fp_decode.h
-
-fp_fmovem_fp:
-	printf	PDECODE,"fmovem.x "
-	| get register list and count them
-	btst	#11,%d2
-	jne	1f
-	bfextu	%d2{#24,#8},%d0		| static register list
-	jra	2f
-1:	bfextu	%d2{#25,#3},%d0		| dynamic register list
-	jsr	fp_get_data_reg
-2:	move.l	%d0,%d1
-	swap	%d1
-	jra	2f
-1:	addq.w	#1,%d1			| count the # of registers in
-2:	lsr.b	#1,%d0			| register list and keep it in %d1
-	jcs	1b
-	jne	2b
-	printf	PDECODE,"#%08x",1,%d1
-#ifdef FPU_EMU_DEBUG
-	btst	#12,%d2
-	jne	1f
-	printf	PDECODE,"-"		| decremental move
-	jra	2f
-1:	printf	PDECODE,"+"		| incremental move
-2:	btst	#13,%d2
-	jeq	1f
-	printf	PDECODE,"->"		| fpu -> cpu
-	jra	2f
-1:	printf	PDECODE,"<-"		| fpu <- cpu
-2:
-#endif
-
-	| decode address mode
-	fp_decode_addr_mode
-
-	.long	fp_ill, fp_ill
-	.long	fpr_indirect, fpr_postinc
-	.long	fpr_predecr, fpr_disp16
-	.long	fpr_extmode0, fpr_extmode1
-
-	| addressing mode: address register indirect
-fpr_indirect:
-	fp_mode_addr_indirect
-	jra	fpr_do_movem
-
-	| addressing mode: address register indirect with postincrement
-fpr_postinc:
-	fp_mode_addr_indirect_postinc
-	jra	fpr_do_movem
-
-fpr_predecr:
-	fp_mode_addr_indirect_predec
-	jra	fpr_do_movem
-
-	| addressing mode: address register/programm counter indirect
-	|		   with 16bit displacement
-fpr_disp16:
-	fp_mode_addr_indirect_disp16
-	jra	fpr_do_movem
-
-fpr_extmode0:
-	fp_mode_addr_indirect_extmode0
-	jra	fpr_do_movem
-
-fpr_extmode1:
-	fp_decode_addr_reg
-	jmp	([0f:w,%pc,%d0*4])
-
-	.align	4
-0:
-	.long	fpr_absolute_short, fpr_absolute_long
-	.long	fpr_disp16, fpr_extmode0
-	.long	fp_ill, fp_ill
-	.long	fp_ill, fp_ill
-
-fpr_absolute_short:
-	fp_mode_abs_short
-	jra	fpr_do_movem
-
-fpr_absolute_long:
-	fp_mode_abs_long
-|	jra	fpr_do_movem
-
-fpr_do_movem:
-	swap	%d1			| get fpu register list
-	lea	(FPD_FPREG,FPDATA),%a1
-	moveq	#12,%d0
-	btst	#12,%d2
-	jne	1f
-	lea	(-12,%a1,%d0*8),%a1
-	neg.l	%d0
-1:	btst	#13,%d2
-	jne	4f
-	| move register from memory into fpu
-	jra	3f
-1:	printf	PMOVEM,"(%p>%p)",2,%a0,%a1
-	getuser.l (%a0)+,%d2,fp_err_ua1,%a0
-	lsr.l	#8,%d2
-	lsr.l	#7,%d2
-	lsr.w	#1,%d2
-	move.l	%d2,(%a1)+
-	getuser.l (%a0)+,%d2,fp_err_ua1,%a0
-	move.l	%d2,(%a1)+
-	getuser.l (%a0),%d2,fp_err_ua1,%a0
-	move.l	%d2,(%a1)
-	subq.l	#8,%a0
-	subq.l	#8,%a1
-	add.l	%d0,%a0
-2:	add.l	%d0,%a1
-3:	lsl.b	#1,%d1
-	jcs	1b
-	jne	2b
-	jra	5f
-	| move register from fpu into memory
-1:	printf	PMOVEM,"(%p>%p)",2,%a1,%a0
-	move.l	(%a1)+,%d2
-	lsl.w	#1,%d2
-	lsl.l	#7,%d2
-	lsl.l	#8,%d2
-	putuser.l %d2,(%a0)+,fp_err_ua1,%a0
-	move.l	(%a1)+,%d2
-	putuser.l %d2,(%a0)+,fp_err_ua1,%a0
-	move.l	(%a1),%d2
-	putuser.l %d2,(%a0),fp_err_ua1,%a0
-	subq.l	#8,%a1
-	subq.l	#8,%a0
-	add.l	%d0,%a0
-2:	add.l	%d0,%a1
-4:	lsl.b	#1,%d1
-	jcs	1b
-	jne	2b
-5:
-	printf	PDECODE,"\n"
-#if 0
-	lea	(FPD_FPREG,FPDATA),%a0
-	printf	PMOVEM,"fp:"
-	printx	PMOVEM,%a0@(0)
-	printx	PMOVEM,%a0@(12)
-	printf	PMOVEM,"\n   "
-	printx	PMOVEM,%a0@(24)
-	printx	PMOVEM,%a0@(36)
-	printf	PMOVEM,"\n   "
-	printx	PMOVEM,%a0@(48)
-	printx	PMOVEM,%a0@(60)
-	printf	PMOVEM,"\n   "
-	printx	PMOVEM,%a0@(72)
-	printx	PMOVEM,%a0@(84)
-	printf	PMOVEM,"\n"
-#endif
-	jra	fp_end
-
-| set flags for decode macros for fmovem control register
-do_fmovem=1
-do_fmovem_cr=1
-
-fp_fmovem_cr:
-	printf	PDECODE,"fmovem.cr "
-	| get register list and count them
-	bfextu	%d2{#19,#3},%d0
-	move.l	%d0,%d1
-	swap	%d1
-	jra	2f
-1:	addq.w	#1,%d1
-2:	lsr.l	#1,%d0
-	jcs	1b
-	jne	2b
-	printf	PDECODE,"#%08x",1,%d1
-#ifdef FPU_EMU_DEBUG
-	btst	#13,%d2
-	jeq	1f
-	printf	PDECODE,"->"		| fpu -> cpu
-	jra	2f
-1:	printf	PDECODE,"<-"		| fpu <- cpu
-2:
-#endif
-
-	| decode address mode
-	fp_decode_addr_mode
-
-	.long	fpc_data, fpc_addr
-	.long	fpc_indirect, fpc_postinc
-	.long	fpc_predecr, fpc_disp16
-	.long	fpc_extmode0, fpc_extmode1
-
-fpc_data:
-	fp_mode_data_direct
-	move.w	%d0,%d1
-	bfffo	%d2{#19,#3},%d0
-	sub.w	#19,%d0
-	lea	(FPD_FPCR,FPDATA,%d0.w*4),%a1
-	btst	#13,%d2
-	jne	1f
-	move.w	%d1,%d0
-	jsr	fp_get_data_reg
-	move.l	%d0,(%a1)
-	jra	fpc_movem_fin
-1:	move.l	(%a1),%d0
-	jsr	fp_put_data_reg
-	jra	fpc_movem_fin
-
-fpc_addr:
-	fp_decode_addr_reg
-	printf	PDECODE,"a%d",1,%d0
-	btst	#13,%d2
-	jne	1f
-	jsr	fp_get_addr_reg
-	move.l	%a0,(FPD_FPIAR,FPDATA)
-	jra	fpc_movem_fin
-1:	move.l	(FPD_FPIAR,FPDATA),%a0
-	jsr	fp_put_addr_reg
-	jra	fpc_movem_fin
-
-fpc_indirect:
-	fp_mode_addr_indirect
-	jra	fpc_do_movem
-
-fpc_postinc:
-	fp_mode_addr_indirect_postinc
-	jra	fpc_do_movem
-
-fpc_predecr:
-	fp_mode_addr_indirect_predec
-	jra	fpc_do_movem
-
-fpc_disp16:
-	fp_mode_addr_indirect_disp16
-	jra	fpc_do_movem
-
-fpc_extmode0:
-	fp_mode_addr_indirect_extmode0
-	jra	fpc_do_movem
-
-fpc_extmode1:
-	fp_decode_addr_reg
-	jmp	([0f:w,%pc,%d0*4])
-
-	.align	4
-0:
-	.long	fpc_absolute_short, fpc_absolute_long
-	.long	fpc_disp16, fpc_extmode0
-	.long	fpc_immediate, fp_ill
-	.long	fp_ill, fp_ill
-
-fpc_absolute_short:
-	fp_mode_abs_short
-	jra	fpc_do_movem
-
-fpc_absolute_long:
-	fp_mode_abs_long
-	jra	fpc_do_movem
-
-fpc_immediate:
-	fp_get_pc %a0
-	lea	(%a0,%d1.w*4),%a1
-	fp_put_pc %a1
-	printf	PDECODE,"#imm"
-|	jra	fpc_do_movem
-#if 0
-	swap	%d1
-	lsl.l	#5,%d1
-	lea	(FPD_FPCR,FPDATA),%a0
-	jra	3f
-1:	move.l	%d0,(%a0)
-2:	addq.l	#4,%a0
-3:	lsl.b	#1,%d1
-	jcs	1b
-	jne	2b
-	jra	fpc_movem_fin
-#endif
-
-fpc_do_movem:
-	swap	%d1			| get fpu register list
-	lsl.l	#5,%d1
-	lea	(FPD_FPCR,FPDATA),%a1
-1:	btst	#13,%d2
-	jne	4f
-
-	| move register from memory into fpu
-	jra	3f
-1:	printf	PMOVEM,"(%p>%p)",2,%a0,%a1
-	getuser.l (%a0)+,%d0,fp_err_ua1,%a0
-	move.l	%d0,(%a1)
-2:	addq.l	#4,%a1
-3:	lsl.b	#1,%d1
-	jcs	1b
-	jne	2b
-	jra	fpc_movem_fin
-
-	| move register from fpu into memory
-1:	printf	PMOVEM,"(%p>%p)",2,%a1,%a0
-	move.l	(%a1),%d0
-	putuser.l %d0,(%a0)+,fp_err_ua1,%a0
-2:	addq.l	#4,%a1
-4:	lsl.b	#1,%d1
-	jcs	1b
-	jne	2b
-
-fpc_movem_fin:
-	and.l	#0x0000fff0,(FPD_FPCR,FPDATA)
-	and.l	#0x0ffffff8,(FPD_FPSR,FPDATA)
-	move.l	(FPD_FPCR,FPDATA),%d0
-	lsr.l	#4,%d0
-	moveq	#3,%d1
-	and.l	%d0,%d1
-	move.w	%d1,(FPD_RND,FPDATA)
-	lsr.l	#2,%d0
-	moveq	#3,%d1
-	and.l	%d0,%d1
-	move.w	%d1,(FPD_PREC,FPDATA)
-	printf	PDECODE,"\n"
-#if 0
-	printf	PMOVEM,"fpcr : %08x\n",1,FPDATA@(FPD_FPCR)
-	printf	PMOVEM,"fpsr : %08x\n",1,FPDATA@(FPD_FPSR)
-	printf	PMOVEM,"fpiar: %08x\n",1,FPDATA@(FPD_FPIAR)
-	clr.l	%d0
-	move.w	(FPD_PREC,FPDATA),%d0
-	printf	PMOVEM,"prec : %04x\n",1,%d0
-	move.w	(FPD_RND,FPDATA),%d0
-	printf	PMOVEM,"rnd  : %04x\n",1,%d0
-#endif
-	jra	fp_end
diff --git a/ANDROID_3.4.5/arch/m68k/math-emu/fp_scan.S b/ANDROID_3.4.5/arch/m68k/math-emu/fp_scan.S
deleted file mode 100644
index e4146ed5..00000000
--- a/ANDROID_3.4.5/arch/m68k/math-emu/fp_scan.S
+++ /dev/null
@@ -1,478 +0,0 @@
-/*
- * fp_scan.S
- *
- * Copyright Roman Zippel, 1997.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, and the entire permission notice in its entirety,
- *    including the disclaimer of warranties.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. The name of the author may not be used to endorse or promote
- *    products derived from this software without specific prior
- *    written permission.
- *
- * ALTERNATIVELY, this product may be distributed under the terms of
- * the GNU General Public License, in which case the provisions of the GPL are
- * required INSTEAD OF the above restrictions.  (This clause is
- * necessary due to a potential bad interaction between the GPL and
- * the restrictions contained in a BSD-style copyright.)
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
- * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
- * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#include "fp_emu.h"
-#include "fp_decode.h"
-
-	.globl	fp_scan, fp_datasize
-
-	.data
-
-| %d2 - first two instr words
-| %d1 - operand size
-
-/* operand formats are:
-
-	Long = 0,		i.e. fmove.l
-	Single,			i.e. fmove.s
-	Extended,		i.e. fmove.x
-	Packed-BCD,		i.e. fmove.p
-	Word,			i.e. fmove.w
-	Double,			i.e. fmove.d
-*/
-
-	.text
-
-| On entry:
-| FPDATA - base of emulated FPU registers
-
-fp_scan:
-| normal fpu instruction? (this excludes fsave/frestore)
-	fp_get_pc %a0
-	printf	PDECODE,"%08x: ",1,%a0
-	getuser.b (%a0),%d0,fp_err_ua1,%a0
-#if 1
-	cmp.b	#0xf2,%d0		| cpid = 1
-#else
-	cmp.b	#0xfc,%d0		| cpid = 6
-#endif
-	jne	fp_nonstd
-| first two instruction words are kept in %d2
-	getuser.l (%a0)+,%d2,fp_err_ua1,%a0
-	fp_put_pc %a0
-fp_decode_cond:				| separate conditional instr
-	fp_decode_cond_instr_type
-
-	.long	fp_decode_move, fp_fscc
-	.long	fp_fbccw, fp_fbccl
-
-fp_decode_move:				| separate move instr
-	fp_decode_move_instr_type
-
-	.long	fp_fgen_fp, fp_ill
-	.long	fp_fgen_ea, fp_fmove_fp2mem
-	.long	fp_fmovem_cr, fp_fmovem_cr
-	.long	fp_fmovem_fp, fp_fmovem_fp
-
-| now all arithmetic instr and a few move instr are left
-fp_fgen_fp:				| source is a fpu register
-	clr.b	(FPD_FPSR+2,FPDATA)	| clear the exception byte
-	fp_decode_sourcespec
-	printf	PDECODE,"f<op>.x fp%d",1,%d0
-	fp_get_fp_reg
-	lea	(FPD_TEMPFP1,FPDATA),%a1 | copy src into a temp location
-	move.l	(%a0)+,(%a1)+
-	move.l	(%a0)+,(%a1)+
-	move.l	(%a0),(%a1)
-	lea	(-8,%a1),%a0
-	jra	fp_getdest
-
-fp_fgen_ea:				| source is <ea>
-	clr.b	(FPD_FPSR+2,FPDATA)	| clear the exception byte
-	| sort out fmovecr, keep data size in %d1
-	fp_decode_sourcespec
-	cmp.w	#7,%d0
-	jeq	fp_fmovecr
-	move.w	%d0,%d1			| store data size twice in %d1
-	swap	%d1			| one can be trashed below
-	move.w	%d0,%d1
-#ifdef FPU_EMU_DEBUG
-	lea	0f,%a0
-	clr.l	%d0
-	move.b	(%a0,%d1.w),%d0
-	printf	PDECODE,"f<op>.%c ",1,%d0
-
-	.data
-0:	.byte	'l','s','x','p','w','d','b',0
-	.previous
-#endif
-
-/*
-	fp_getsource, fp_getdest
-
-	basically, we end up with a pointer to the source operand in
-	%a1, and a pointer to the destination operand in %a0.  both
-	are, of course, 96-bit extended floating point numbers.
-*/
-
-fp_getsource:
-	| decode addressing mode for source
-	fp_decode_addr_mode
-
-	.long	fp_data, fp_ill
-	.long	fp_indirect, fp_postinc
-	.long	fp_predecr, fp_disp16
-	.long	fp_extmode0, fp_extmode1
-
-	| addressing mode: data register direct
-fp_data:
-	fp_mode_data_direct
-	jsr	fp_get_data_reg
-	lea	(FPD_TEMPFP1,FPDATA),%a0
-	jmp	([0f:w,%pc,%d1.w*4])
-
-	.align	4
-0:
-	.long	fp_data_long, fp_data_single
-	.long	fp_ill, fp_ill
-	.long	fp_data_word, fp_ill
-	.long	fp_data_byte, fp_ill
-
-	| data types that fit in an integer data register
-fp_data_byte:
-	extb.l	%d0
-	jra	fp_data_long
-
-fp_data_word:
-	ext.l	%d0
-
-fp_data_long:
-	jsr	fp_conv_long2ext
-	jra	fp_getdest
-
-fp_data_single:
-	jsr	fp_conv_single2ext
-	jra	fp_getdest
-
-	| addressing mode: address register indirect
-fp_indirect:
-	fp_mode_addr_indirect
-	jra	fp_fetchsource
-
-	| addressing mode: address register indirect with postincrement
-fp_postinc:
-	fp_mode_addr_indirect_postinc
-	jra	fp_fetchsource
-
-	| addressing mode: address register indirect with predecrement
-fp_predecr:
-	fp_mode_addr_indirect_predec
-	jra	fp_fetchsource
-
-	| addressing mode: address register/programm counter indirect
-	|		   with 16bit displacement
-fp_disp16:
-	fp_mode_addr_indirect_disp16
-	jra	fp_fetchsource
-
-	| all other indirect addressing modes will finally end up here
-fp_extmode0:
-	fp_mode_addr_indirect_extmode0
-	jra	fp_fetchsource
-
-| all pc relative addressing modes and immediate/absolute modes end up here
-| the first ones are sent to fp_extmode0 or fp_disp16
-| and only the latter are handled here
-fp_extmode1:
-	fp_decode_addr_reg
-	jmp	([0f:w,%pc,%d0*4])
-
-	.align	4
-0:
-	.long	fp_abs_short, fp_abs_long
-	.long	fp_disp16, fp_extmode0
-	.long	fp_immediate, fp_ill
-	.long	fp_ill, fp_ill
-
-	| addressing mode: absolute short
-fp_abs_short:
-	fp_mode_abs_short
-	jra	fp_fetchsource
-
-	| addressing mode: absolute long
-fp_abs_long:
-	fp_mode_abs_long
-	jra	fp_fetchsource
-
-	| addressing mode: immediate data
-fp_immediate:
-	printf	PDECODE,"#"
-	fp_get_pc %a0
-	move.w	(fp_datasize,%d1.w*2),%d0
-	addq.w	#1,%d0
-	and.w	#-2,%d0
-#ifdef FPU_EMU_DEBUG
-	movem.l	%d0/%d1,-(%sp)
-	movel	%a0,%a1
-	clr.l	%d1
-	jra	2f
-1:	getuser.b (%a1)+,%d1,fp_err_ua1,%a1
-	printf	PDECODE,"%02x",1,%d1
-2:	dbra	%d0,1b
-	movem.l	(%sp)+,%d0/%d1
-#endif
-	lea	(%a0,%d0.w),%a1
-	fp_put_pc %a1
-|	jra	fp_fetchsource
-
-fp_fetchsource:
-	move.l	%a0,%a1
-	swap	%d1
-	lea	(FPD_TEMPFP1,FPDATA),%a0
-	jmp	([0f:w,%pc,%d1.w*4])
-
-	.align	4
-0:	.long	fp_long, fp_single
-	.long	fp_ext, fp_pack
-	.long	fp_word, fp_double
-	.long	fp_byte, fp_ill
-
-fp_long:
-	getuser.l (%a1),%d0,fp_err_ua1,%a1
-	jsr	fp_conv_long2ext
-	jra	fp_getdest
-
-fp_single:
-	getuser.l (%a1),%d0,fp_err_ua1,%a1
-	jsr	fp_conv_single2ext
-	jra	fp_getdest
-
-fp_ext:
-	getuser.l (%a1)+,%d0,fp_err_ua1,%a1
-	lsr.l	#8,%d0
-	lsr.l	#7,%d0
-	lsr.w	#1,%d0
-	move.l	%d0,(%a0)+
-	getuser.l (%a1)+,%d0,fp_err_ua1,%a1
-	move.l	%d0,(%a0)+
-	getuser.l (%a1),%d0,fp_err_ua1,%a1
-	move.l	%d0,(%a0)
-	subq.l	#8,%a0
-	jra	fp_getdest
-
-fp_pack:
-	/* not supported yet */
-	jra	fp_ill
-
-fp_word:
-	getuser.w (%a1),%d0,fp_err_ua1,%a1
-	ext.l	%d0
-	jsr	fp_conv_long2ext
-	jra	fp_getdest
-
-fp_double:
-	jsr	fp_conv_double2ext
-	jra	fp_getdest
-
-fp_byte:
-	getuser.b (%a1),%d0,fp_err_ua1,%a1
-	extb.l	%d0
-	jsr	fp_conv_long2ext
-|	jra	fp_getdest
-
-fp_getdest:
-	move.l	%a0,%a1
-	bfextu	%d2{#22,#3},%d0
-	printf	PDECODE,",fp%d\n",1,%d0
-	fp_get_fp_reg
-	movem.l	%a0/%a1,-(%sp)
-	pea	fp_finalrounding
-	bfextu	%d2{#25,#7},%d0
-	jmp	([0f:w,%pc,%d0*4])
-
-	.align	4
-0:
-	.long	fp_fmove_mem2fp, fp_fint, fp_fsinh, fp_fintrz
-	.long	fp_fsqrt, fp_ill, fp_flognp1, fp_ill
-	.long	fp_fetoxm1, fp_ftanh, fp_fatan, fp_ill
-	.long	fp_fasin, fp_fatanh, fp_fsin, fp_ftan
-	.long	fp_fetox, fp_ftwotox, fp_ftentox, fp_ill
-	.long	fp_flogn, fp_flog10, fp_flog2, fp_ill
-	.long	fp_fabs, fp_fcosh, fp_fneg, fp_ill
-	.long	fp_facos, fp_fcos, fp_fgetexp, fp_fgetman
-	.long	fp_fdiv, fp_fmod, fp_fadd, fp_fmul
-	.long	fpa_fsgldiv, fp_frem, fp_fscale, fpa_fsglmul
-	.long	fp_fsub, fp_ill, fp_ill, fp_ill
-	.long	fp_ill, fp_ill, fp_ill, fp_ill
-	.long	fp_fsincos0, fp_fsincos1, fp_fsincos2, fp_fsincos3
-	.long	fp_fsincos4, fp_fsincos5, fp_fsincos6, fp_fsincos7
-	.long	fp_fcmp, fp_ill, fp_ftst, fp_ill
-	.long	fp_ill, fp_ill, fp_ill, fp_ill
-	.long	fp_fsmove, fp_fssqrt, fp_ill, fp_ill
-	.long	fp_fdmove, fp_fdsqrt, fp_ill, fp_ill
-	.long	fp_ill, fp_ill, fp_ill, fp_ill
-	.long	fp_ill, fp_ill, fp_ill, fp_ill
-	.long	fp_ill, fp_ill, fp_ill, fp_ill
-	.long	fp_ill, fp_ill, fp_ill, fp_ill
-	.long	fp_fsabs, fp_ill, fp_fsneg, fp_ill
-	.long	fp_fdabs, fp_ill, fp_fdneg, fp_ill
-	.long	fp_fsdiv, fp_ill, fp_fsadd, fp_fsmul
-	.long	fp_fddiv, fp_ill, fp_fdadd, fp_fdmul
-	.long	fp_fssub, fp_ill, fp_ill, fp_ill
-	.long	fp_fdsub, fp_ill, fp_ill, fp_ill
-	.long	fp_ill, fp_ill, fp_ill, fp_ill
-	.long	fp_ill, fp_ill, fp_ill, fp_ill
-	.long	fp_ill, fp_ill, fp_ill, fp_ill
-	.long	fp_ill, fp_ill, fp_ill, fp_ill
-
-	| Instructions follow
-
-	| Move an (emulated) ROM constant
-fp_fmovecr:
-	bfextu	%d2{#27,#5},%d0
-	printf	PINSTR,"fp_fmovecr #%d",1,%d0
-	move.l	%d0,%d1
-	add.l	%d0,%d0
-	add.l	%d1,%d0
-	lea	(fp_constants,%d0*4),%a0
-	move.l	#0x801cc0ff,%d0
-	addq.l	#1,%d1
-	lsl.l	%d1,%d0
-	jcc	1f
-	fp_set_sr FPSR_EXC_INEX2			| INEX2 exception
-1:	moveq	#-128,%d0				| continue with fmove
-	and.l	%d0,%d2
-	jra	fp_getdest
-
-	.data
-	.align	4
-fp_constants:
-	.long	0x00004000,0xc90fdaa2,0x2168c235	| pi
-	.extend	0,0,0,0,0,0,0,0,0,0
-	.long	0x00003ffd,0x9a209a84,0xfbcff798	| log10(2)
-	.long	0x00004000,0xadf85458,0xa2bb4a9a	| e
-	.long	0x00003fff,0xb8aa3b29,0x5c17f0bc	| log2(e)
-	.long	0x00003ffd,0xde5bd8a9,0x37287195	| log10(e)
-	.long	0x00000000,0x00000000,0x00000000	| 0.0
-	.long	0x00003ffe,0xb17217f7,0xd1cf79ac	| 1n(2)
-	.long	0x00004000,0x935d8ddd,0xaaa8ac17	| 1n(10)
-	| read this as "1.0 * 2^0" - note the high bit in the mantissa
-	.long	0x00003fff,0x80000000,0x00000000	| 10^0
-	.long	0x00004002,0xa0000000,0x00000000	| 10^1
-	.long	0x00004005,0xc8000000,0x00000000	| 10^2
-	.long	0x0000400c,0x9c400000,0x00000000	| 10^4
-	.long	0x00004019,0xbebc2000,0x00000000	| 10^8
-	.long	0x00004034,0x8e1bc9bf,0x04000000	| 10^16
-	.long	0x00004069,0x9dc5ada8,0x2b70b59e	| 10^32
-	.long	0x000040d3,0xc2781f49,0xffcfa6d5	| 10^64
-	.long	0x000041a8,0x93ba47c9,0x80e98ce0	| 10^128
-	.long	0x00004351,0xaa7eebfb,0x9df9de8e	| 10^256
-	.long	0x000046a3,0xe319a0ae,0xa60e91c7	| 10^512
-	.long	0x00004d48,0xc9767586,0x81750c17	| 10^1024
-	.long	0x00005a92,0x9e8b3b5d,0xc53d5de5	| 10^2048
-	.long	0x00007525,0xc4605202,0x8a20979b	| 10^4096
-	.previous
-
-fp_fmove_mem2fp:
-	printf	PINSTR,"fmove %p,%p\n",2,%a0,%a1
-	move.l	(%a1)+,(%a0)+
-	move.l	(%a1)+,(%a0)+
-	move.l	(%a1),(%a0)
-	subq.l	#8,%a0
-	rts
-
-fpa_fsglmul:
-	move.l	#fp_finalrounding_single_fast,(%sp)
-	jra	fp_fsglmul
-
-fpa_fsgldiv:
-	move.l	#fp_finalrounding_single_fast,(%sp)
-	jra	fp_fsgldiv
-
-.macro	fp_dosingleprec instr
-	printf	PINSTR,"single "
-	move.l	#fp_finalrounding_single,(%sp)
-	jra	\instr
-.endm
-
-.macro	fp_dodoubleprec instr
-	printf	PINSTR,"double "
-	move.l	#fp_finalrounding_double,(%sp)
-	jra	\instr
-.endm
-
-fp_fsmove:
-	fp_dosingleprec fp_fmove_mem2fp
-
-fp_fssqrt:
-	fp_dosingleprec fp_fsqrt
-
-fp_fdmove:
-	fp_dodoubleprec fp_fmove_mem2fp
-
-fp_fdsqrt:
-	fp_dodoubleprec fp_fsqrt
-
-fp_fsabs:
-	fp_dosingleprec fp_fabs
-
-fp_fsneg:
-	fp_dosingleprec fp_fneg
-
-fp_fdabs:
-	fp_dodoubleprec fp_fabs
-
-fp_fdneg:
-	fp_dodoubleprec fp_fneg
-
-fp_fsdiv:
-	fp_dosingleprec fp_fdiv
-
-fp_fsadd:
-	fp_dosingleprec fp_fadd
-
-fp_fsmul:
-	fp_dosingleprec fp_fmul
-
-fp_fddiv:
-	fp_dodoubleprec fp_fdiv
-
-fp_fdadd:
-	fp_dodoubleprec fp_fadd
-
-fp_fdmul:
-	fp_dodoubleprec fp_fmul
-
-fp_fssub:
-	fp_dosingleprec fp_fsub
-
-fp_fdsub:
-	fp_dodoubleprec fp_fsub
-
-fp_nonstd:
-	fp_get_pc %a0
-	getuser.l (%a0),%d0,fp_err_ua1,%a0
-	printf	,"nonstd ((%08x)=%08x)\n",2,%a0,%d0
-	moveq	#-1,%d0
-	rts
-
-	.data
-	.align	4
-
-	| data sizes corresponding to the operand formats
-fp_datasize:
-	.word	4, 4, 12, 12, 2, 8, 1, 0
diff --git a/ANDROID_3.4.5/arch/m68k/math-emu/fp_trig.c b/ANDROID_3.4.5/arch/m68k/math-emu/fp_trig.c
deleted file mode 100644
index 6361d078..00000000
--- a/ANDROID_3.4.5/arch/m68k/math-emu/fp_trig.c
+++ /dev/null
@@ -1,183 +0,0 @@
-/*
-
-  fp_trig.c: floating-point math routines for the Linux-m68k
-  floating point emulator.
-
-  Copyright (c) 1998-1999 David Huggins-Daines / Roman Zippel.
-
-  I hereby give permission, free of charge, to copy, modify, and
-  redistribute this software, in source or binary form, provided that
-  the above copyright notice and the following disclaimer are included
-  in all such copies.
-
-  THIS SOFTWARE IS PROVIDED "AS IS", WITH ABSOLUTELY NO WARRANTY, REAL
-  OR IMPLIED.
-
-*/
-
-#include "fp_emu.h"
-#include "fp_trig.h"
-
-struct fp_ext *
-fp_fsin(struct fp_ext *dest, struct fp_ext *src)
-{
-	uprint("fsin\n");
-
-	fp_monadic_check(dest, src);
-
-	return dest;
-}
-
-struct fp_ext *
-fp_fcos(struct fp_ext *dest, struct fp_ext *src)
-{
-	uprint("fcos\n");
-
-	fp_monadic_check(dest, src);
-
-	return dest;
-}
-
-struct fp_ext *
-fp_ftan(struct fp_ext *dest, struct fp_ext *src)
-{
-	uprint("ftan\n");
-
-	fp_monadic_check(dest, src);
-
-	return dest;
-}
-
-struct fp_ext *
-fp_fasin(struct fp_ext *dest, struct fp_ext *src)
-{
-	uprint("fasin\n");
-
-	fp_monadic_check(dest, src);
-
-	return dest;
-}
-
-struct fp_ext *
-fp_facos(struct fp_ext *dest, struct fp_ext *src)
-{
-	uprint("facos\n");
-
-	fp_monadic_check(dest, src);
-
-	return dest;
-}
-
-struct fp_ext *
-fp_fatan(struct fp_ext *dest, struct fp_ext *src)
-{
-	uprint("fatan\n");
-
-	fp_monadic_check(dest, src);
-
-	return dest;
-}
-
-struct fp_ext *
-fp_fsinh(struct fp_ext *dest, struct fp_ext *src)
-{
-	uprint("fsinh\n");
-
-	fp_monadic_check(dest, src);
-
-	return dest;
-}
-
-struct fp_ext *
-fp_fcosh(struct fp_ext *dest, struct fp_ext *src)
-{
-	uprint("fcosh\n");
-
-	fp_monadic_check(dest, src);
-
-	return dest;
-}
-
-struct fp_ext *
-fp_ftanh(struct fp_ext *dest, struct fp_ext *src)
-{
-	uprint("ftanh\n");
-
-	fp_monadic_check(dest, src);
-
-	return dest;
-}
-
-struct fp_ext *
-fp_fatanh(struct fp_ext *dest, struct fp_ext *src)
-{
-	uprint("fatanh\n");
-
-	fp_monadic_check(dest, src);
-
-	return dest;
-}
-
-struct fp_ext *
-fp_fsincos0(struct fp_ext *dest, struct fp_ext *src)
-{
-	uprint("fsincos0\n");
-
-	return dest;
-}
-
-struct fp_ext *
-fp_fsincos1(struct fp_ext *dest, struct fp_ext *src)
-{
-	uprint("fsincos1\n");
-
-	return dest;
-}
-
-struct fp_ext *
-fp_fsincos2(struct fp_ext *dest, struct fp_ext *src)
-{
-	uprint("fsincos2\n");
-
-	return dest;
-}
-
-struct fp_ext *
-fp_fsincos3(struct fp_ext *dest, struct fp_ext *src)
-{
-	uprint("fsincos3\n");
-
-	return dest;
-}
-
-struct fp_ext *
-fp_fsincos4(struct fp_ext *dest, struct fp_ext *src)
-{
-	uprint("fsincos4\n");
-
-	return dest;
-}
-
-struct fp_ext *
-fp_fsincos5(struct fp_ext *dest, struct fp_ext *src)
-{
-	uprint("fsincos5\n");
-
-	return dest;
-}
-
-struct fp_ext *
-fp_fsincos6(struct fp_ext *dest, struct fp_ext *src)
-{
-	uprint("fsincos6\n");
-
-	return dest;
-}
-
-struct fp_ext *
-fp_fsincos7(struct fp_ext *dest, struct fp_ext *src)
-{
-	uprint("fsincos7\n");
-
-	return dest;
-}
diff --git a/ANDROID_3.4.5/arch/m68k/math-emu/fp_trig.h b/ANDROID_3.4.5/arch/m68k/math-emu/fp_trig.h
deleted file mode 100644
index af8b247e..00000000
--- a/ANDROID_3.4.5/arch/m68k/math-emu/fp_trig.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
-
-  fp_trig.h: floating-point math routines for the Linux-m68k
-  floating point emulator.
-
-  Copyright (c) 1998 David Huggins-Daines.
-
-  I hereby give permission, free of charge, to copy, modify, and
-  redistribute this software, in source or binary form, provided that
-  the above copyright notice and the following disclaimer are included
-  in all such copies.
-
-  THIS SOFTWARE IS PROVIDED "AS IS", WITH ABSOLUTELY NO WARRANTY, REAL
-  OR IMPLIED.
-
-*/
-
-#ifndef FP_TRIG_H
-#define FP_TRIG_H
-
-#include "fp_emu.h"
-
-/* floating point trigonometric instructions:
-
-   the arguments to these are in the "internal" extended format, that
-   is, an "exploded" version of the 96-bit extended fp format used by
-   the 68881.
-
-   they return a status code, which should end up in %d0, if all goes
-   well.  */
-
-#endif /* FP_TRIG__H */
diff --git a/ANDROID_3.4.5/arch/m68k/math-emu/fp_util.S b/ANDROID_3.4.5/arch/m68k/math-emu/fp_util.S
deleted file mode 100644
index b093b85f..00000000
--- a/ANDROID_3.4.5/arch/m68k/math-emu/fp_util.S
+++ /dev/null
@@ -1,1454 +0,0 @@
-/*
- * fp_util.S
- *
- * Copyright Roman Zippel, 1997.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, and the entire permission notice in its entirety,
- *    including the disclaimer of warranties.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. The name of the author may not be used to endorse or promote
- *    products derived from this software without specific prior
- *    written permission.
- *
- * ALTERNATIVELY, this product may be distributed under the terms of
- * the GNU General Public License, in which case the provisions of the GPL are
- * required INSTEAD OF the above restrictions.  (This clause is
- * necessary due to a potential bad interaction between the GPL and
- * the restrictions contained in a BSD-style copyright.)
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
- * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
- * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#include "fp_emu.h"
-
-/*
- * Here are lots of conversion and normalization functions mainly
- * used by fp_scan.S
- * Note that these functions are optimized for "normal" numbers,
- * these are handled first and exit as fast as possible, this is
- * especially important for fp_normalize_ext/fp_conv_ext2ext, as
- * it's called very often.
- * The register usage is optimized for fp_scan.S and which register
- * is currently at that time unused, be careful if you want change
- * something here. %d0 and %d1 is always usable, sometimes %d2 (or
- * only the lower half) most function have to return the %a0
- * unmodified, so that the caller can immediately reuse it.
- */
-
-	.globl	fp_ill, fp_end
-
-	| exits from fp_scan:
-	| illegal instruction
-fp_ill:
-	printf	,"fp_illegal\n"
-	rts
-	| completed instruction
-fp_end:
-	tst.l	(TASK_MM-8,%a2)
-	jmi	1f
-	tst.l	(TASK_MM-4,%a2)
-	jmi	1f
-	tst.l	(TASK_MM,%a2)
-	jpl	2f
-1:	printf	,"oops:%p,%p,%p\n",3,%a2@(TASK_MM-8),%a2@(TASK_MM-4),%a2@(TASK_MM)
-2:	clr.l	%d0
-	rts
-
-	.globl	fp_conv_long2ext, fp_conv_single2ext
-	.globl	fp_conv_double2ext, fp_conv_ext2ext
-	.globl	fp_normalize_ext, fp_normalize_double
-	.globl	fp_normalize_single, fp_normalize_single_fast
-	.globl	fp_conv_ext2double, fp_conv_ext2single
-	.globl	fp_conv_ext2long, fp_conv_ext2short
-	.globl	fp_conv_ext2byte
-	.globl	fp_finalrounding_single, fp_finalrounding_single_fast
-	.globl	fp_finalrounding_double
-	.globl	fp_finalrounding, fp_finaltest, fp_final
-
-/*
- * First several conversion functions from a source operand
- * into the extended format. Note, that only fp_conv_ext2ext
- * normalizes the number and is always called after the other
- * conversion functions, which only move the information into
- * fp_ext structure.
- */
-
-	| fp_conv_long2ext:
-	|
-	| args:	%d0 = source (32-bit long)
-	|	%a0 = destination (ptr to struct fp_ext)
-
-fp_conv_long2ext:
-	printf	PCONV,"l2e: %p -> %p(",2,%d0,%a0
-	clr.l	%d1			| sign defaults to zero
-	tst.l	%d0
-	jeq	fp_l2e_zero		| is source zero?
-	jpl	1f			| positive?
-	moveq	#1,%d1
-	neg.l	%d0
-1:	swap	%d1
-	move.w	#0x3fff+31,%d1
-	move.l	%d1,(%a0)+		| set sign / exp
-	move.l	%d0,(%a0)+		| set mantissa
-	clr.l	(%a0)
-	subq.l	#8,%a0			| restore %a0
-	printx	PCONV,%a0@
-	printf	PCONV,")\n"
-	rts
-	| source is zero
-fp_l2e_zero:
-	clr.l	(%a0)+
-	clr.l	(%a0)+
-	clr.l	(%a0)
-	subq.l	#8,%a0
-	printx	PCONV,%a0@
-	printf	PCONV,")\n"
-	rts
-
-	| fp_conv_single2ext
-	| args:	%d0 = source (single-precision fp value)
-	|	%a0 = dest (struct fp_ext *)
-
-fp_conv_single2ext:
-	printf	PCONV,"s2e: %p -> %p(",2,%d0,%a0
-	move.l	%d0,%d1
-	lsl.l	#8,%d0			| shift mantissa
-	lsr.l	#8,%d1			| exponent / sign
-	lsr.l	#7,%d1
-	lsr.w	#8,%d1
-	jeq	fp_s2e_small		| zero / denormal?
-	cmp.w	#0xff,%d1		| NaN / Inf?
-	jeq	fp_s2e_large
-	bset	#31,%d0			| set explizit bit
-	add.w	#0x3fff-0x7f,%d1	| re-bias the exponent.
-9:	move.l	%d1,(%a0)+		| fp_ext.sign, fp_ext.exp
-	move.l	%d0,(%a0)+		| high lword of fp_ext.mant
-	clr.l	(%a0)			| low lword = 0
-	subq.l	#8,%a0
-	printx	PCONV,%a0@
-	printf	PCONV,")\n"
-	rts
-	| zeros and denormalized
-fp_s2e_small:
-	| exponent is zero, so explizit bit is already zero too
-	tst.l	%d0
-	jeq	9b
-	move.w	#0x4000-0x7f,%d1
-	jra	9b
-	| infinities and NAN
-fp_s2e_large:
-	bclr	#31,%d0			| clear explizit bit
-	move.w	#0x7fff,%d1
-	jra	9b
-
-fp_conv_double2ext:
-#ifdef FPU_EMU_DEBUG
-	getuser.l %a1@(0),%d0,fp_err_ua2,%a1
-	getuser.l %a1@(4),%d1,fp_err_ua2,%a1
-	printf	PCONV,"d2e: %p%p -> %p(",3,%d0,%d1,%a0
-#endif
-	getuser.l (%a1)+,%d0,fp_err_ua2,%a1
-	move.l	%d0,%d1
-	lsl.l	#8,%d0			| shift high mantissa
-	lsl.l	#3,%d0
-	lsr.l	#8,%d1			| exponent / sign
-	lsr.l	#7,%d1
-	lsr.w	#5,%d1
-	jeq	fp_d2e_small		| zero / denormal?
-	cmp.w	#0x7ff,%d1		| NaN / Inf?
-	jeq	fp_d2e_large
-	bset	#31,%d0			| set explizit bit
-	add.w	#0x3fff-0x3ff,%d1	| re-bias the exponent.
-9:	move.l	%d1,(%a0)+		| fp_ext.sign, fp_ext.exp
-	move.l	%d0,(%a0)+
-	getuser.l (%a1)+,%d0,fp_err_ua2,%a1
-	move.l	%d0,%d1
-	lsl.l	#8,%d0
-	lsl.l	#3,%d0
-	move.l	%d0,(%a0)
-	moveq	#21,%d0
-	lsr.l	%d0,%d1
-	or.l	%d1,-(%a0)
-	subq.l	#4,%a0
-	printx	PCONV,%a0@
-	printf	PCONV,")\n"
-	rts
-	| zeros and denormalized
-fp_d2e_small:
-	| exponent is zero, so explizit bit is already zero too
-	tst.l	%d0
-	jeq	9b
-	move.w	#0x4000-0x3ff,%d1
-	jra	9b
-	| infinities and NAN
-fp_d2e_large:
-	bclr	#31,%d0			| clear explizit bit
-	move.w	#0x7fff,%d1
-	jra	9b
-
-	| fp_conv_ext2ext:
-	| originally used to get longdouble from userspace, now it's
-	| called before arithmetic operations to make sure the number
-	| is normalized [maybe rename it?].
-	| args:	%a0 = dest (struct fp_ext *)
-	| returns 0 in %d0 for a NaN, otherwise 1
-
-fp_conv_ext2ext:
-	printf	PCONV,"e2e: %p(",1,%a0
-	printx	PCONV,%a0@
-	printf	PCONV,"), "
-	move.l	(%a0)+,%d0
-	cmp.w	#0x7fff,%d0		| Inf / NaN?
-	jeq	fp_e2e_large
-	move.l	(%a0),%d0
-	jpl	fp_e2e_small		| zero / denorm?
-	| The high bit is set, so normalization is irrelevant.
-fp_e2e_checkround:
-	subq.l	#4,%a0
-#ifdef CONFIG_M68KFPU_EMU_EXTRAPREC
-	move.b	(%a0),%d0
-	jne	fp_e2e_round
-#endif
-	printf	PCONV,"%p(",1,%a0
-	printx	PCONV,%a0@
-	printf	PCONV,")\n"
-	moveq	#1,%d0
-	rts
-#ifdef CONFIG_M68KFPU_EMU_EXTRAPREC
-fp_e2e_round:
-	fp_set_sr FPSR_EXC_INEX2
-	clr.b	(%a0)
-	move.w	(FPD_RND,FPDATA),%d2
-	jne	fp_e2e_roundother	| %d2 == 0, round to nearest
-	tst.b	%d0			| test guard bit
-	jpl	9f			| zero is closer
-	btst	#0,(11,%a0)		| test lsb bit
-	jne	fp_e2e_doroundup	| round to infinity
-	lsl.b	#1,%d0			| check low bits
-	jeq	9f			| round to zero
-fp_e2e_doroundup:
-	addq.l	#1,(8,%a0)
-	jcc	9f
-	addq.l	#1,(4,%a0)
-	jcc	9f
-	move.w	#0x8000,(4,%a0)
-	addq.w	#1,(2,%a0)
-9:	printf	PNORM,"%p(",1,%a0
-	printx	PNORM,%a0@
-	printf	PNORM,")\n"
-	rts
-fp_e2e_roundother:
-	subq.w	#2,%d2
-	jcs	9b			| %d2 < 2, round to zero
-	jhi	1f			| %d2 > 2, round to +infinity
-	tst.b	(1,%a0)			| to -inf
-	jne	fp_e2e_doroundup	| negative, round to infinity
-	jra	9b			| positive, round to zero
-1:	tst.b	(1,%a0)			| to +inf
-	jeq	fp_e2e_doroundup	| positive, round to infinity
-	jra	9b			| negative, round to zero
-#endif
-	| zeros and subnormals:
-	| try to normalize these anyway.
-fp_e2e_small:
-	jne	fp_e2e_small1		| high lword zero?
-	move.l	(4,%a0),%d0
-	jne	fp_e2e_small2
-#ifdef CONFIG_M68KFPU_EMU_EXTRAPREC
-	clr.l	%d0
-	move.b	(-4,%a0),%d0
-	jne	fp_e2e_small3
-#endif
-	| Genuine zero.
-	clr.w	-(%a0)
-	subq.l	#2,%a0
-	printf	PNORM,"%p(",1,%a0
-	printx	PNORM,%a0@
-	printf	PNORM,")\n"
-	moveq	#1,%d0
-	rts
-	| definitely subnormal, need to shift all 64 bits
-fp_e2e_small1:
-	bfffo	%d0{#0,#32},%d1
-	move.w	-(%a0),%d2
-	sub.w	%d1,%d2
-	jcc	1f
-	| Pathologically small, denormalize.
-	add.w	%d2,%d1
-	clr.w	%d2
-1:	move.w	%d2,(%a0)+
-	move.w	%d1,%d2
-	jeq	fp_e2e_checkround
-	| fancy 64-bit double-shift begins here
-	lsl.l	%d2,%d0
-	move.l	%d0,(%a0)+
-	move.l	(%a0),%d0
-	move.l	%d0,%d1
-	lsl.l	%d2,%d0
-	move.l	%d0,(%a0)
-	neg.w	%d2
-	and.w	#0x1f,%d2
-	lsr.l	%d2,%d1
-	or.l	%d1,-(%a0)
-#ifdef CONFIG_M68KFPU_EMU_EXTRAPREC
-fp_e2e_extra1:
-	clr.l	%d0
-	move.b	(-4,%a0),%d0
-	neg.w	%d2
-	add.w	#24,%d2
-	jcc	1f
-	clr.b	(-4,%a0)
-	lsl.l	%d2,%d0
-	or.l	%d0,(4,%a0)
-	jra	fp_e2e_checkround
-1:	addq.w	#8,%d2
-	lsl.l	%d2,%d0
-	move.b	%d0,(-4,%a0)
-	lsr.l	#8,%d0
-	or.l	%d0,(4,%a0)
-#endif
-	jra	fp_e2e_checkround
-	| pathologically small subnormal
-fp_e2e_small2:
-	bfffo	%d0{#0,#32},%d1
-	add.w	#32,%d1
-	move.w	-(%a0),%d2
-	sub.w	%d1,%d2
-	jcc	1f
-	| Beyond pathologically small, denormalize.
-	add.w	%d2,%d1
-	clr.w	%d2
-1:	move.w	%d2,(%a0)+
-	ext.l	%d1
-	jeq	fp_e2e_checkround
-	clr.l	(4,%a0)
-	sub.w	#32,%d2
-	jcs	1f
-	lsl.l	%d1,%d0			| lower lword needs only to be shifted
-	move.l	%d0,(%a0)		| into the higher lword
-#ifdef CONFIG_M68KFPU_EMU_EXTRAPREC
-	clr.l	%d0
-	move.b	(-4,%a0),%d0
-	clr.b	(-4,%a0)
-	neg.w	%d1
-	add.w	#32,%d1
-	bfins	%d0,(%a0){%d1,#8}
-#endif
-	jra	fp_e2e_checkround
-1:	neg.w	%d1			| lower lword is splitted between
-	bfins	%d0,(%a0){%d1,#32}	| higher and lower lword
-#ifndef CONFIG_M68KFPU_EMU_EXTRAPREC
-	jra	fp_e2e_checkround
-#else
-	move.w	%d1,%d2
-	jra	fp_e2e_extra1
-	| These are extremely small numbers, that will mostly end up as zero
-	| anyway, so this is only important for correct rounding.
-fp_e2e_small3:
-	bfffo	%d0{#24,#8},%d1
-	add.w	#40,%d1
-	move.w	-(%a0),%d2
-	sub.w	%d1,%d2
-	jcc	1f
-	| Pathologically small, denormalize.
-	add.w	%d2,%d1
-	clr.w	%d2
-1:	move.w	%d2,(%a0)+
-	ext.l	%d1
-	jeq	fp_e2e_checkround
-	cmp.w	#8,%d1
-	jcs	2f
-1:	clr.b	(-4,%a0)
-	sub.w	#64,%d1
-	jcs	1f
-	add.w	#24,%d1
-	lsl.l	%d1,%d0
-	move.l	%d0,(%a0)
-	jra	fp_e2e_checkround
-1:	neg.w	%d1
-	bfins	%d0,(%a0){%d1,#8}
-	jra	fp_e2e_checkround
-2:	lsl.l	%d1,%d0
-	move.b	%d0,(-4,%a0)
-	lsr.l	#8,%d0
-	move.b	%d0,(7,%a0)
-	jra	fp_e2e_checkround
-#endif
-1:	move.l	%d0,%d1			| lower lword is splitted between
-	lsl.l	%d2,%d0			| higher and lower lword
-	move.l	%d0,(%a0)
-	move.l	%d1,%d0
-	neg.w	%d2
-	add.w	#32,%d2
-	lsr.l	%d2,%d0
-	move.l	%d0,-(%a0)
-	jra	fp_e2e_checkround
-	| Infinities and NaNs
-fp_e2e_large:
-	move.l	(%a0)+,%d0
-	jne	3f
-1:	tst.l	(%a0)
-	jne	4f
-	moveq	#1,%d0
-2:	subq.l	#8,%a0
-	printf	PCONV,"%p(",1,%a0
-	printx	PCONV,%a0@
-	printf	PCONV,")\n"
-	rts
-	| we have maybe a NaN, shift off the highest bit
-3:	lsl.l	#1,%d0
-	jeq	1b
-	| we have a NaN, clear the return value
-4:	clrl	%d0
-	jra	2b
-
-
-/*
- * Normalization functions.  Call these on the output of general
- * FP operators, and before any conversion into the destination
- * formats. fp_normalize_ext has always to be called first, the
- * following conversion functions expect an already normalized
- * number.
- */
-
-	| fp_normalize_ext:
-	| normalize an extended in extended (unpacked) format, basically
-	| it does the same as fp_conv_ext2ext, additionally it also does
-	| the necessary postprocessing checks.
-	| args:	%a0 (struct fp_ext *)
-	| NOTE: it does _not_ modify %a0/%a1 and the upper word of %d2
-
-fp_normalize_ext:
-	printf	PNORM,"ne: %p(",1,%a0
-	printx	PNORM,%a0@
-	printf	PNORM,"), "
-	move.l	(%a0)+,%d0
-	cmp.w	#0x7fff,%d0		| Inf / NaN?
-	jeq	fp_ne_large
-	move.l	(%a0),%d0
-	jpl	fp_ne_small		| zero / denorm?
-	| The high bit is set, so normalization is irrelevant.
-fp_ne_checkround:
-	subq.l	#4,%a0
-#ifdef CONFIG_M68KFPU_EMU_EXTRAPREC
-	move.b	(%a0),%d0
-	jne	fp_ne_round
-#endif
-	printf	PNORM,"%p(",1,%a0
-	printx	PNORM,%a0@
-	printf	PNORM,")\n"
-	rts
-#ifdef CONFIG_M68KFPU_EMU_EXTRAPREC
-fp_ne_round:
-	fp_set_sr FPSR_EXC_INEX2
-	clr.b	(%a0)
-	move.w	(FPD_RND,FPDATA),%d2
-	jne	fp_ne_roundother	| %d2 == 0, round to nearest
-	tst.b	%d0			| test guard bit
-	jpl	9f			| zero is closer
-	btst	#0,(11,%a0)		| test lsb bit
-	jne	fp_ne_doroundup		| round to infinity
-	lsl.b	#1,%d0			| check low bits
-	jeq	9f			| round to zero
-fp_ne_doroundup:
-	addq.l	#1,(8,%a0)
-	jcc	9f
-	addq.l	#1,(4,%a0)
-	jcc	9f
-	addq.w	#1,(2,%a0)
-	move.w	#0x8000,(4,%a0)
-9:	printf	PNORM,"%p(",1,%a0
-	printx	PNORM,%a0@
-	printf	PNORM,")\n"
-	rts
-fp_ne_roundother:
-	subq.w	#2,%d2
-	jcs	9b			| %d2 < 2, round to zero
-	jhi	1f			| %d2 > 2, round to +infinity
-	tst.b	(1,%a0)			| to -inf
-	jne	fp_ne_doroundup		| negative, round to infinity
-	jra	9b			| positive, round to zero
-1:	tst.b	(1,%a0)			| to +inf
-	jeq	fp_ne_doroundup		| positive, round to infinity
-	jra	9b			| negative, round to zero
-#endif
-	| Zeros and subnormal numbers
-	| These are probably merely subnormal, rather than "denormalized"
-	|  numbers, so we will try to make them normal again.
-fp_ne_small:
-	jne	fp_ne_small1		| high lword zero?
-	move.l	(4,%a0),%d0
-	jne	fp_ne_small2
-#ifdef CONFIG_M68KFPU_EMU_EXTRAPREC
-	clr.l	%d0
-	move.b	(-4,%a0),%d0
-	jne	fp_ne_small3
-#endif
-	| Genuine zero.
-	clr.w	-(%a0)
-	subq.l	#2,%a0
-	printf	PNORM,"%p(",1,%a0
-	printx	PNORM,%a0@
-	printf	PNORM,")\n"
-	rts
-	| Subnormal.
-fp_ne_small1:
-	bfffo	%d0{#0,#32},%d1
-	move.w	-(%a0),%d2
-	sub.w	%d1,%d2
-	jcc	1f
-	| Pathologically small, denormalize.
-	add.w	%d2,%d1
-	clr.w	%d2
-	fp_set_sr FPSR_EXC_UNFL
-1:	move.w	%d2,(%a0)+
-	move.w	%d1,%d2
-	jeq	fp_ne_checkround
-	| This is exactly the same 64-bit double shift as seen above.
-	lsl.l	%d2,%d0
-	move.l	%d0,(%a0)+
-	move.l	(%a0),%d0
-	move.l	%d0,%d1
-	lsl.l	%d2,%d0
-	move.l	%d0,(%a0)
-	neg.w	%d2
-	and.w	#0x1f,%d2
-	lsr.l	%d2,%d1
-	or.l	%d1,-(%a0)
-#ifdef CONFIG_M68KFPU_EMU_EXTRAPREC
-fp_ne_extra1:
-	clr.l	%d0
-	move.b	(-4,%a0),%d0
-	neg.w	%d2
-	add.w	#24,%d2
-	jcc	1f
-	clr.b	(-4,%a0)
-	lsl.l	%d2,%d0
-	or.l	%d0,(4,%a0)
-	jra	fp_ne_checkround
-1:	addq.w	#8,%d2
-	lsl.l	%d2,%d0
-	move.b	%d0,(-4,%a0)
-	lsr.l	#8,%d0
-	or.l	%d0,(4,%a0)
-#endif
-	jra	fp_ne_checkround
-	| May or may not be subnormal, if so, only 32 bits to shift.
-fp_ne_small2:
-	bfffo	%d0{#0,#32},%d1
-	add.w	#32,%d1
-	move.w	-(%a0),%d2
-	sub.w	%d1,%d2
-	jcc	1f
-	| Beyond pathologically small, denormalize.
-	add.w	%d2,%d1
-	clr.w	%d2
-	fp_set_sr FPSR_EXC_UNFL
-1:	move.w	%d2,(%a0)+
-	ext.l	%d1
-	jeq	fp_ne_checkround
-	clr.l	(4,%a0)
-	sub.w	#32,%d1
-	jcs	1f
-	lsl.l	%d1,%d0			| lower lword needs only to be shifted
-	move.l	%d0,(%a0)		| into the higher lword
-#ifdef CONFIG_M68KFPU_EMU_EXTRAPREC
-	clr.l	%d0
-	move.b	(-4,%a0),%d0
-	clr.b	(-4,%a0)
-	neg.w	%d1
-	add.w	#32,%d1
-	bfins	%d0,(%a0){%d1,#8}
-#endif
-	jra	fp_ne_checkround
-1:	neg.w	%d1			| lower lword is splitted between
-	bfins	%d0,(%a0){%d1,#32}	| higher and lower lword
-#ifndef CONFIG_M68KFPU_EMU_EXTRAPREC
-	jra	fp_ne_checkround
-#else
-	move.w	%d1,%d2
-	jra	fp_ne_extra1
-	| These are extremely small numbers, that will mostly end up as zero
-	| anyway, so this is only important for correct rounding.
-fp_ne_small3:
-	bfffo	%d0{#24,#8},%d1
-	add.w	#40,%d1
-	move.w	-(%a0),%d2
-	sub.w	%d1,%d2
-	jcc	1f
-	| Pathologically small, denormalize.
-	add.w	%d2,%d1
-	clr.w	%d2
-1:	move.w	%d2,(%a0)+
-	ext.l	%d1
-	jeq	fp_ne_checkround
-	cmp.w	#8,%d1
-	jcs	2f
-1:	clr.b	(-4,%a0)
-	sub.w	#64,%d1
-	jcs	1f
-	add.w	#24,%d1
-	lsl.l	%d1,%d0
-	move.l	%d0,(%a0)
-	jra	fp_ne_checkround
-1:	neg.w	%d1
-	bfins	%d0,(%a0){%d1,#8}
-	jra	fp_ne_checkround
-2:	lsl.l	%d1,%d0
-	move.b	%d0,(-4,%a0)
-	lsr.l	#8,%d0
-	move.b	%d0,(7,%a0)
-	jra	fp_ne_checkround
-#endif
-	| Infinities and NaNs, again, same as above.
-fp_ne_large:
-	move.l	(%a0)+,%d0
-	jne	3f
-1:	tst.l	(%a0)
-	jne	4f
-2:	subq.l	#8,%a0
-	printf	PNORM,"%p(",1,%a0
-	printx	PNORM,%a0@
-	printf	PNORM,")\n"
-	rts
-	| we have maybe a NaN, shift off the highest bit
-3:	move.l	%d0,%d1
-	lsl.l	#1,%d1
-	jne	4f
-	clr.l	(-4,%a0)
-	jra	1b
-	| we have a NaN, test if it is signaling
-4:	bset	#30,%d0
-	jne	2b
-	fp_set_sr FPSR_EXC_SNAN
-	move.l	%d0,(-4,%a0)
-	jra	2b
-
-	| these next two do rounding as per the IEEE standard.
-	| values for the rounding modes appear to be:
-	| 0:	Round to nearest
-	| 1:	Round to zero
-	| 2:	Round to -Infinity
-	| 3:	Round to +Infinity
-	| both functions expect that fp_normalize was already
-	| called (and extended argument is already normalized
-	| as far as possible), these are used if there is different
-	| rounding precision is selected and before converting
-	| into single/double
-
-	| fp_normalize_double:
-	| normalize an extended with double (52-bit) precision
-	| args:	 %a0 (struct fp_ext *)
-
-fp_normalize_double:
-	printf	PNORM,"nd: %p(",1,%a0
-	printx	PNORM,%a0@
-	printf	PNORM,"), "
-	move.l	(%a0)+,%d2
-	tst.w	%d2
-	jeq	fp_nd_zero		| zero / denormalized
-	cmp.w	#0x7fff,%d2
-	jeq	fp_nd_huge		| NaN / infinitive.
-	sub.w	#0x4000-0x3ff,%d2	| will the exponent fit?
-	jcs	fp_nd_small		| too small.
-	cmp.w	#0x7fe,%d2
-	jcc	fp_nd_large		| too big.
-	addq.l	#4,%a0
-	move.l	(%a0),%d0		| low lword of mantissa
-	| now, round off the low 11 bits.
-fp_nd_round:
-	moveq	#21,%d1
-	lsl.l	%d1,%d0			| keep 11 low bits.
-	jne	fp_nd_checkround	| Are they non-zero?
-	| nothing to do here
-9:	subq.l	#8,%a0
-	printf	PNORM,"%p(",1,%a0
-	printx	PNORM,%a0@
-	printf	PNORM,")\n"
-	rts
-	| Be careful with the X bit! It contains the lsb
-	| from the shift above, it is needed for round to nearest.
-fp_nd_checkround:
-	fp_set_sr FPSR_EXC_INEX2	| INEX2 bit
-	and.w	#0xf800,(2,%a0)		| clear bits 0-10
-	move.w	(FPD_RND,FPDATA),%d2	| rounding mode
-	jne	2f			| %d2 == 0, round to nearest
-	tst.l	%d0			| test guard bit
-	jpl	9b			| zero is closer
-	| here we test the X bit by adding it to %d2
-	clr.w	%d2			| first set z bit, addx only clears it
-	addx.w	%d2,%d2			| test lsb bit
-	| IEEE754-specified "round to even" behaviour.  If the guard
-	| bit is set, then the number is odd, so rounding works like
-	| in grade-school arithmetic (i.e. 1.5 rounds to 2.0)
-	| Otherwise, an equal distance rounds towards zero, so as not
-	| to produce an odd number.  This is strange, but it is what
-	| the standard says.
-	jne	fp_nd_doroundup		| round to infinity
-	lsl.l	#1,%d0			| check low bits
-	jeq	9b			| round to zero
-fp_nd_doroundup:
-	| round (the mantissa, that is) towards infinity
-	add.l	#0x800,(%a0)
-	jcc	9b			| no overflow, good.
-	addq.l	#1,-(%a0)		| extend to high lword
-	jcc	1f			| no overflow, good.
-	| Yow! we have managed to overflow the mantissa.  Since this
-	| only happens when %d1 was 0xfffff800, it is now zero, so
-	| reset the high bit, and increment the exponent.
-	move.w	#0x8000,(%a0)
-	addq.w	#1,-(%a0)
-	cmp.w	#0x43ff,(%a0)+		| exponent now overflown?
-	jeq	fp_nd_large		| yes, so make it infinity.
-1:	subq.l	#4,%a0
-	printf	PNORM,"%p(",1,%a0
-	printx	PNORM,%a0@
-	printf	PNORM,")\n"
-	rts
-2:	subq.w	#2,%d2
-	jcs	9b			| %d2 < 2, round to zero
-	jhi	3f			| %d2 > 2, round to +infinity
-	| Round to +Inf or -Inf.  High word of %d2 contains the
-	| sign of the number, by the way.
-	swap	%d2			| to -inf
-	tst.b	%d2
-	jne	fp_nd_doroundup		| negative, round to infinity
-	jra	9b			| positive, round to zero
-3:	swap	%d2			| to +inf
-	tst.b	%d2
-	jeq	fp_nd_doroundup		| positive, round to infinity
-	jra	9b			| negative, round to zero
-	| Exponent underflow.  Try to make a denormal, and set it to
-	| the smallest possible fraction if this fails.
-fp_nd_small:
-	fp_set_sr FPSR_EXC_UNFL		| set UNFL bit
-	move.w	#0x3c01,(-2,%a0)	| 2**-1022
-	neg.w	%d2			| degree of underflow
-	cmp.w	#32,%d2			| single or double shift?
-	jcc	1f
-	| Again, another 64-bit double shift.
-	move.l	(%a0),%d0
-	move.l	%d0,%d1
-	lsr.l	%d2,%d0
-	move.l	%d0,(%a0)+
-	move.l	(%a0),%d0
-	lsr.l	%d2,%d0
-	neg.w	%d2
-	add.w	#32,%d2
-	lsl.l	%d2,%d1
-	or.l	%d1,%d0
-	move.l	(%a0),%d1
-	move.l	%d0,(%a0)
-	| Check to see if we shifted off any significant bits
-	lsl.l	%d2,%d1
-	jeq	fp_nd_round		| Nope, round.
-	bset	#0,%d0			| Yes, so set the "sticky bit".
-	jra	fp_nd_round		| Now, round.
-	| Another 64-bit single shift and store
-1:	sub.w	#32,%d2
-	cmp.w	#32,%d2			| Do we really need to shift?
-	jcc	2f			| No, the number is too small.
-	move.l	(%a0),%d0
-	clr.l	(%a0)+
-	move.l	%d0,%d1
-	lsr.l	%d2,%d0
-	neg.w	%d2
-	add.w	#32,%d2
-	| Again, check to see if we shifted off any significant bits.
-	tst.l	(%a0)
-	jeq	1f
-	bset	#0,%d0			| Sticky bit.
-1:	move.l	%d0,(%a0)
-	lsl.l	%d2,%d1
-	jeq	fp_nd_round
-	bset	#0,%d0
-	jra	fp_nd_round
-	| Sorry, the number is just too small.
-2:	clr.l	(%a0)+
-	clr.l	(%a0)
-	moveq	#1,%d0			| Smallest possible fraction,
-	jra	fp_nd_round		| round as desired.
-	| zero and denormalized
-fp_nd_zero:
-	tst.l	(%a0)+
-	jne	1f
-	tst.l	(%a0)
-	jne	1f
-	subq.l	#8,%a0
-	printf	PNORM,"%p(",1,%a0
-	printx	PNORM,%a0@
-	printf	PNORM,")\n"
-	rts				| zero.  nothing to do.
-	| These are not merely subnormal numbers, but true denormals,
-	| i.e. pathologically small (exponent is 2**-16383) numbers.
-	| It is clearly impossible for even a normal extended number
-	| with that exponent to fit into double precision, so just
-	| write these ones off as "too darn small".
-1:	fp_set_sr FPSR_EXC_UNFL		| Set UNFL bit
-	clr.l	(%a0)
-	clr.l	-(%a0)
-	move.w	#0x3c01,-(%a0)		| i.e. 2**-1022
-	addq.l	#6,%a0
-	moveq	#1,%d0
-	jra	fp_nd_round		| round.
-	| Exponent overflow.  Just call it infinity.
-fp_nd_large:
-	move.w	#0x7ff,%d0
-	and.w	(6,%a0),%d0
-	jeq	1f
-	fp_set_sr FPSR_EXC_INEX2
-1:	fp_set_sr FPSR_EXC_OVFL
-	move.w	(FPD_RND,FPDATA),%d2
-	jne	3f			| %d2 = 0 round to nearest
-1:	move.w	#0x7fff,(-2,%a0)
-	clr.l	(%a0)+
-	clr.l	(%a0)
-2:	subq.l	#8,%a0
-	printf	PNORM,"%p(",1,%a0
-	printx	PNORM,%a0@
-	printf	PNORM,")\n"
-	rts
-3:	subq.w	#2,%d2
-	jcs	5f			| %d2 < 2, round to zero
-	jhi	4f			| %d2 > 2, round to +infinity
-	tst.b	(-3,%a0)		| to -inf
-	jne	1b
-	jra	5f
-4:	tst.b	(-3,%a0)		| to +inf
-	jeq	1b
-5:	move.w	#0x43fe,(-2,%a0)
-	moveq	#-1,%d0
-	move.l	%d0,(%a0)+
-	move.w	#0xf800,%d0
-	move.l	%d0,(%a0)
-	jra	2b
-	| Infinities or NaNs
-fp_nd_huge:
-	subq.l	#4,%a0
-	printf	PNORM,"%p(",1,%a0
-	printx	PNORM,%a0@
-	printf	PNORM,")\n"
-	rts
-
-	| fp_normalize_single:
-	| normalize an extended with single (23-bit) precision
-	| args:	 %a0 (struct fp_ext *)
-
-fp_normalize_single:
-	printf	PNORM,"ns: %p(",1,%a0
-	printx	PNORM,%a0@
-	printf	PNORM,") "
-	addq.l	#2,%a0
-	move.w	(%a0)+,%d2
-	jeq	fp_ns_zero		| zero / denormalized
-	cmp.w	#0x7fff,%d2
-	jeq	fp_ns_huge		| NaN / infinitive.
-	sub.w	#0x4000-0x7f,%d2	| will the exponent fit?
-	jcs	fp_ns_small		| too small.
-	cmp.w	#0xfe,%d2
-	jcc	fp_ns_large		| too big.
-	move.l	(%a0)+,%d0		| get high lword of mantissa
-fp_ns_round:
-	tst.l	(%a0)			| check the low lword
-	jeq	1f
-	| Set a sticky bit if it is non-zero.  This should only
-	| affect the rounding in what would otherwise be equal-
-	| distance situations, which is what we want it to do.
-	bset	#0,%d0
-1:	clr.l	(%a0)			| zap it from memory.
-	| now, round off the low 8 bits of the hi lword.
-	tst.b	%d0			| 8 low bits.
-	jne	fp_ns_checkround	| Are they non-zero?
-	| nothing to do here
-	subq.l	#8,%a0
-	printf	PNORM,"%p(",1,%a0
-	printx	PNORM,%a0@
-	printf	PNORM,")\n"
-	rts
-fp_ns_checkround:
-	fp_set_sr FPSR_EXC_INEX2	| INEX2 bit
-	clr.b	-(%a0)			| clear low byte of high lword
-	subq.l	#3,%a0
-	move.w	(FPD_RND,FPDATA),%d2	| rounding mode
-	jne	2f			| %d2 == 0, round to nearest
-	tst.b	%d0			| test guard bit
-	jpl	9f			| zero is closer
-	btst	#8,%d0			| test lsb bit
-	| round to even behaviour, see above.
-	jne	fp_ns_doroundup		| round to infinity
-	lsl.b	#1,%d0			| check low bits
-	jeq	9f			| round to zero
-fp_ns_doroundup:
-	| round (the mantissa, that is) towards infinity
-	add.l	#0x100,(%a0)
-	jcc	9f			| no overflow, good.
-	| Overflow.  This means that the %d1 was 0xffffff00, so it
-	| is now zero.  We will set the mantissa to reflect this, and
-	| increment the exponent (checking for overflow there too)
-	move.w	#0x8000,(%a0)
-	addq.w	#1,-(%a0)
-	cmp.w	#0x407f,(%a0)+		| exponent now overflown?
-	jeq	fp_ns_large		| yes, so make it infinity.
-9:	subq.l	#4,%a0
-	printf	PNORM,"%p(",1,%a0
-	printx	PNORM,%a0@
-	printf	PNORM,")\n"
-	rts
-	| check nondefault rounding modes
-2:	subq.w	#2,%d2
-	jcs	9b			| %d2 < 2, round to zero
-	jhi	3f			| %d2 > 2, round to +infinity
-	tst.b	(-3,%a0)		| to -inf
-	jne	fp_ns_doroundup		| negative, round to infinity
-	jra	9b			| positive, round to zero
-3:	tst.b	(-3,%a0)		| to +inf
-	jeq	fp_ns_doroundup		| positive, round to infinity
-	jra	9b			| negative, round to zero
-	| Exponent underflow.  Try to make a denormal, and set it to
-	| the smallest possible fraction if this fails.
-fp_ns_small:
-	fp_set_sr FPSR_EXC_UNFL		| set UNFL bit
-	move.w	#0x3f81,(-2,%a0)	| 2**-126
-	neg.w	%d2			| degree of underflow
-	cmp.w	#32,%d2			| single or double shift?
-	jcc	2f
-	| a 32-bit shift.
-	move.l	(%a0),%d0
-	move.l	%d0,%d1
-	lsr.l	%d2,%d0
-	move.l	%d0,(%a0)+
-	| Check to see if we shifted off any significant bits.
-	neg.w	%d2
-	add.w	#32,%d2
-	lsl.l	%d2,%d1
-	jeq	1f
-	bset	#0,%d0			| Sticky bit.
-	| Check the lower lword
-1:	tst.l	(%a0)
-	jeq	fp_ns_round
-	clr	(%a0)
-	bset	#0,%d0			| Sticky bit.
-	jra	fp_ns_round
-	| Sorry, the number is just too small.
-2:	clr.l	(%a0)+
-	clr.l	(%a0)
-	moveq	#1,%d0			| Smallest possible fraction,
-	jra	fp_ns_round		| round as desired.
-	| Exponent overflow.  Just call it infinity.
-fp_ns_large:
-	tst.b	(3,%a0)
-	jeq	1f
-	fp_set_sr FPSR_EXC_INEX2
-1:	fp_set_sr FPSR_EXC_OVFL
-	move.w	(FPD_RND,FPDATA),%d2
-	jne	3f			| %d2 = 0 round to nearest
-1:	move.w	#0x7fff,(-2,%a0)
-	clr.l	(%a0)+
-	clr.l	(%a0)
-2:	subq.l	#8,%a0
-	printf	PNORM,"%p(",1,%a0
-	printx	PNORM,%a0@
-	printf	PNORM,")\n"
-	rts
-3:	subq.w	#2,%d2
-	jcs	5f			| %d2 < 2, round to zero
-	jhi	4f			| %d2 > 2, round to +infinity
-	tst.b	(-3,%a0)		| to -inf
-	jne	1b
-	jra	5f
-4:	tst.b	(-3,%a0)		| to +inf
-	jeq	1b
-5:	move.w	#0x407e,(-2,%a0)
-	move.l	#0xffffff00,(%a0)+
-	clr.l	(%a0)
-	jra	2b
-	| zero and denormalized
-fp_ns_zero:
-	tst.l	(%a0)+
-	jne	1f
-	tst.l	(%a0)
-	jne	1f
-	subq.l	#8,%a0
-	printf	PNORM,"%p(",1,%a0
-	printx	PNORM,%a0@
-	printf	PNORM,")\n"
-	rts				| zero.  nothing to do.
-	| These are not merely subnormal numbers, but true denormals,
-	| i.e. pathologically small (exponent is 2**-16383) numbers.
-	| It is clearly impossible for even a normal extended number
-	| with that exponent to fit into single precision, so just
-	| write these ones off as "too darn small".
-1:	fp_set_sr FPSR_EXC_UNFL		| Set UNFL bit
-	clr.l	(%a0)
-	clr.l	-(%a0)
-	move.w	#0x3f81,-(%a0)		| i.e. 2**-126
-	addq.l	#6,%a0
-	moveq	#1,%d0
-	jra	fp_ns_round		| round.
-	| Infinities or NaNs
-fp_ns_huge:
-	subq.l	#4,%a0
-	printf	PNORM,"%p(",1,%a0
-	printx	PNORM,%a0@
-	printf	PNORM,")\n"
-	rts
-
-	| fp_normalize_single_fast:
-	| normalize an extended with single (23-bit) precision
-	| this is only used by fsgldiv/fsgdlmul, where the
-	| operand is not completly normalized.
-	| args:	 %a0 (struct fp_ext *)
-
-fp_normalize_single_fast:
-	printf	PNORM,"nsf: %p(",1,%a0
-	printx	PNORM,%a0@
-	printf	PNORM,") "
-	addq.l	#2,%a0
-	move.w	(%a0)+,%d2
-	cmp.w	#0x7fff,%d2
-	jeq	fp_nsf_huge		| NaN / infinitive.
-	move.l	(%a0)+,%d0		| get high lword of mantissa
-fp_nsf_round:
-	tst.l	(%a0)			| check the low lword
-	jeq	1f
-	| Set a sticky bit if it is non-zero.  This should only
-	| affect the rounding in what would otherwise be equal-
-	| distance situations, which is what we want it to do.
-	bset	#0,%d0
-1:	clr.l	(%a0)			| zap it from memory.
-	| now, round off the low 8 bits of the hi lword.
-	tst.b	%d0			| 8 low bits.
-	jne	fp_nsf_checkround	| Are they non-zero?
-	| nothing to do here
-	subq.l	#8,%a0
-	printf	PNORM,"%p(",1,%a0
-	printx	PNORM,%a0@
-	printf	PNORM,")\n"
-	rts
-fp_nsf_checkround:
-	fp_set_sr FPSR_EXC_INEX2	| INEX2 bit
-	clr.b	-(%a0)			| clear low byte of high lword
-	subq.l	#3,%a0
-	move.w	(FPD_RND,FPDATA),%d2	| rounding mode
-	jne	2f			| %d2 == 0, round to nearest
-	tst.b	%d0			| test guard bit
-	jpl	9f			| zero is closer
-	btst	#8,%d0			| test lsb bit
-	| round to even behaviour, see above.
-	jne	fp_nsf_doroundup		| round to infinity
-	lsl.b	#1,%d0			| check low bits
-	jeq	9f			| round to zero
-fp_nsf_doroundup:
-	| round (the mantissa, that is) towards infinity
-	add.l	#0x100,(%a0)
-	jcc	9f			| no overflow, good.
-	| Overflow.  This means that the %d1 was 0xffffff00, so it
-	| is now zero.  We will set the mantissa to reflect this, and
-	| increment the exponent (checking for overflow there too)
-	move.w	#0x8000,(%a0)
-	addq.w	#1,-(%a0)
-	cmp.w	#0x407f,(%a0)+		| exponent now overflown?
-	jeq	fp_nsf_large		| yes, so make it infinity.
-9:	subq.l	#4,%a0
-	printf	PNORM,"%p(",1,%a0
-	printx	PNORM,%a0@
-	printf	PNORM,")\n"
-	rts
-	| check nondefault rounding modes
-2:	subq.w	#2,%d2
-	jcs	9b			| %d2 < 2, round to zero
-	jhi	3f			| %d2 > 2, round to +infinity
-	tst.b	(-3,%a0)		| to -inf
-	jne	fp_nsf_doroundup	| negative, round to infinity
-	jra	9b			| positive, round to zero
-3:	tst.b	(-3,%a0)		| to +inf
-	jeq	fp_nsf_doroundup		| positive, round to infinity
-	jra	9b			| negative, round to zero
-	| Exponent overflow.  Just call it infinity.
-fp_nsf_large:
-	tst.b	(3,%a0)
-	jeq	1f
-	fp_set_sr FPSR_EXC_INEX2
-1:	fp_set_sr FPSR_EXC_OVFL
-	move.w	(FPD_RND,FPDATA),%d2
-	jne	3f			| %d2 = 0 round to nearest
-1:	move.w	#0x7fff,(-2,%a0)
-	clr.l	(%a0)+
-	clr.l	(%a0)
-2:	subq.l	#8,%a0
-	printf	PNORM,"%p(",1,%a0
-	printx	PNORM,%a0@
-	printf	PNORM,")\n"
-	rts
-3:	subq.w	#2,%d2
-	jcs	5f			| %d2 < 2, round to zero
-	jhi	4f			| %d2 > 2, round to +infinity
-	tst.b	(-3,%a0)		| to -inf
-	jne	1b
-	jra	5f
-4:	tst.b	(-3,%a0)		| to +inf
-	jeq	1b
-5:	move.w	#0x407e,(-2,%a0)
-	move.l	#0xffffff00,(%a0)+
-	clr.l	(%a0)
-	jra	2b
-	| Infinities or NaNs
-fp_nsf_huge:
-	subq.l	#4,%a0
-	printf	PNORM,"%p(",1,%a0
-	printx	PNORM,%a0@
-	printf	PNORM,")\n"
-	rts
-
-	| conv_ext2int (macro):
-	| Generates a subroutine that converts an extended value to an
-	| integer of a given size, again, with the appropriate type of
-	| rounding.
-
-	| Macro arguments:
-	| s:	size, as given in an assembly instruction.
-	| b:	number of bits in that size.
-
-	| Subroutine arguments:
-	| %a0:	source (struct fp_ext *)
-
-	| Returns the integer in %d0 (like it should)
-
-.macro conv_ext2int s,b
-	.set	inf,(1<<(\b-1))-1	| i.e. MAXINT
-	printf	PCONV,"e2i%d: %p(",2,#\b,%a0
-	printx	PCONV,%a0@
-	printf	PCONV,") "
-	addq.l	#2,%a0
-	move.w	(%a0)+,%d2		| exponent
-	jeq	fp_e2i_zero\b		| zero / denorm (== 0, here)
-	cmp.w	#0x7fff,%d2
-	jeq	fp_e2i_huge\b		| Inf / NaN
-	sub.w	#0x3ffe,%d2
-	jcs	fp_e2i_small\b
-	cmp.w	#\b,%d2
-	jhi	fp_e2i_large\b
-	move.l	(%a0),%d0
-	move.l	%d0,%d1
-	lsl.l	%d2,%d1
-	jne	fp_e2i_round\b
-	tst.l	(4,%a0)
-	jne	fp_e2i_round\b
-	neg.w	%d2
-	add.w	#32,%d2
-	lsr.l	%d2,%d0
-9:	tst.w	(-4,%a0)
-	jne	1f
-	tst.\s	%d0
-	jmi	fp_e2i_large\b
-	printf	PCONV,"-> %p\n",1,%d0
-	rts
-1:	neg.\s	%d0
-	jeq	1f
-	jpl	fp_e2i_large\b
-1:	printf	PCONV,"-> %p\n",1,%d0
-	rts
-fp_e2i_round\b:
-	fp_set_sr FPSR_EXC_INEX2	| INEX2 bit
-	neg.w	%d2
-	add.w	#32,%d2
-	.if	\b>16
-	jeq	5f
-	.endif
-	lsr.l	%d2,%d0
-	move.w	(FPD_RND,FPDATA),%d2	| rounding mode
-	jne	2f			| %d2 == 0, round to nearest
-	tst.l	%d1			| test guard bit
-	jpl	9b			| zero is closer
-	btst	%d2,%d0			| test lsb bit (%d2 still 0)
-	jne	fp_e2i_doroundup\b
-	lsl.l	#1,%d1			| check low bits
-	jne	fp_e2i_doroundup\b
-	tst.l	(4,%a0)
-	jeq	9b
-fp_e2i_doroundup\b:
-	addq.l	#1,%d0
-	jra	9b
-	| check nondefault rounding modes
-2:	subq.w	#2,%d2
-	jcs	9b			| %d2 < 2, round to zero
-	jhi	3f			| %d2 > 2, round to +infinity
-	tst.w	(-4,%a0)		| to -inf
-	jne	fp_e2i_doroundup\b	| negative, round to infinity
-	jra	9b			| positive, round to zero
-3:	tst.w	(-4,%a0)		| to +inf
-	jeq	fp_e2i_doroundup\b	| positive, round to infinity
-	jra	9b	| negative, round to zero
-	| we are only want -2**127 get correctly rounded here,
-	| since the guard bit is in the lower lword.
-	| everything else ends up anyway as overflow.
-	.if	\b>16
-5:	move.w	(FPD_RND,FPDATA),%d2	| rounding mode
-	jne	2b			| %d2 == 0, round to nearest
-	move.l	(4,%a0),%d1		| test guard bit
-	jpl	9b			| zero is closer
-	lsl.l	#1,%d1			| check low bits
-	jne	fp_e2i_doroundup\b
-	jra	9b
-	.endif
-fp_e2i_zero\b:
-	clr.l	%d0
-	tst.l	(%a0)+
-	jne	1f
-	tst.l	(%a0)
-	jeq	3f
-1:	subq.l	#4,%a0
-	fp_clr_sr FPSR_EXC_UNFL		| fp_normalize_ext has set this bit
-fp_e2i_small\b:
-	fp_set_sr FPSR_EXC_INEX2
-	clr.l	%d0
-	move.w	(FPD_RND,FPDATA),%d2	| rounding mode
-	subq.w	#2,%d2
-	jcs	3f			| %d2 < 2, round to nearest/zero
-	jhi	2f			| %d2 > 2, round to +infinity
-	tst.w	(-4,%a0)		| to -inf
-	jeq	3f
-	subq.\s	#1,%d0
-	jra	3f
-2:	tst.w	(-4,%a0)		| to +inf
-	jne	3f
-	addq.\s	#1,%d0
-3:	printf	PCONV,"-> %p\n",1,%d0
-	rts
-fp_e2i_large\b:
-	fp_set_sr FPSR_EXC_OPERR
-	move.\s	#inf,%d0
-	tst.w	(-4,%a0)
-	jeq	1f
-	addq.\s	#1,%d0
-1:	printf	PCONV,"-> %p\n",1,%d0
-	rts
-fp_e2i_huge\b:
-	move.\s	(%a0),%d0
-	tst.l	(%a0)
-	jne	1f
-	tst.l	(%a0)
-	jeq	fp_e2i_large\b
-	| fp_normalize_ext has set this bit already
-	| and made the number nonsignaling
-1:	fp_tst_sr FPSR_EXC_SNAN
-	jne	1f
-	fp_set_sr FPSR_EXC_OPERR
-1:	printf	PCONV,"-> %p\n",1,%d0
-	rts
-.endm
-
-fp_conv_ext2long:
-	conv_ext2int l,32
-
-fp_conv_ext2short:
-	conv_ext2int w,16
-
-fp_conv_ext2byte:
-	conv_ext2int b,8
-
-fp_conv_ext2double:
-	jsr	fp_normalize_double
-	printf	PCONV,"e2d: %p(",1,%a0
-	printx	PCONV,%a0@
-	printf	PCONV,"), "
-	move.l	(%a0)+,%d2
-	cmp.w	#0x7fff,%d2
-	jne	1f
-	move.w	#0x7ff,%d2
-	move.l	(%a0)+,%d0
-	jra	2f
-1:	sub.w	#0x3fff-0x3ff,%d2
-	move.l	(%a0)+,%d0
-	jmi	2f
-	clr.w	%d2
-2:	lsl.w	#5,%d2
-	lsl.l	#7,%d2
-	lsl.l	#8,%d2
-	move.l	%d0,%d1
-	lsl.l	#1,%d0
-	lsr.l	#4,%d0
-	lsr.l	#8,%d0
-	or.l	%d2,%d0
-	putuser.l %d0,(%a1)+,fp_err_ua2,%a1
-	moveq	#21,%d0
-	lsl.l	%d0,%d1
-	move.l	(%a0),%d0
-	lsr.l	#4,%d0
-	lsr.l	#7,%d0
-	or.l	%d1,%d0
-	putuser.l %d0,(%a1),fp_err_ua2,%a1
-#ifdef FPU_EMU_DEBUG
-	getuser.l %a1@(-4),%d0,fp_err_ua2,%a1
-	getuser.l %a1@(0),%d1,fp_err_ua2,%a1
-	printf	PCONV,"%p(%08x%08x)\n",3,%a1,%d0,%d1
-#endif
-	rts
-
-fp_conv_ext2single:
-	jsr	fp_normalize_single
-	printf	PCONV,"e2s: %p(",1,%a0
-	printx	PCONV,%a0@
-	printf	PCONV,"), "
-	move.l	(%a0)+,%d1
-	cmp.w	#0x7fff,%d1
-	jne	1f
-	move.w	#0xff,%d1
-	move.l	(%a0)+,%d0
-	jra	2f
-1:	sub.w	#0x3fff-0x7f,%d1
-	move.l	(%a0)+,%d0
-	jmi	2f
-	clr.w	%d1
-2:	lsl.w	#8,%d1
-	lsl.l	#7,%d1
-	lsl.l	#8,%d1
-	bclr	#31,%d0
-	lsr.l	#8,%d0
-	or.l	%d1,%d0
-	printf	PCONV,"%08x\n",1,%d0
-	rts
-
-	| special return addresses for instr that
-	| encode the rounding precision in the opcode
-	| (e.g. fsmove,fdmove)
-
-fp_finalrounding_single:
-	addq.l	#8,%sp
-	jsr	fp_normalize_ext
-	jsr	fp_normalize_single
-	jra	fp_finaltest
-
-fp_finalrounding_single_fast:
-	addq.l	#8,%sp
-	jsr	fp_normalize_ext
-	jsr	fp_normalize_single_fast
-	jra	fp_finaltest
-
-fp_finalrounding_double:
-	addq.l	#8,%sp
-	jsr	fp_normalize_ext
-	jsr	fp_normalize_double
-	jra	fp_finaltest
-
-	| fp_finaltest:
-	| set the emulated status register based on the outcome of an
-	| emulated instruction.
-
-fp_finalrounding:
-	addq.l	#8,%sp
-|	printf	,"f: %p\n",1,%a0
-	jsr	fp_normalize_ext
-	move.w	(FPD_PREC,FPDATA),%d0
-	subq.w	#1,%d0
-	jcs	fp_finaltest
-	jne	1f
-	jsr	fp_normalize_single
-	jra	2f
-1:	jsr	fp_normalize_double
-2:|	printf	,"f: %p\n",1,%a0
-fp_finaltest:
-	| First, we do some of the obvious tests for the exception
-	| status byte and condition code bytes of fp_sr here, so that
-	| they do not have to be handled individually by every
-	| emulated instruction.
-	clr.l	%d0
-	addq.l	#1,%a0
-	tst.b	(%a0)+			| sign
-	jeq	1f
-	bset	#FPSR_CC_NEG-24,%d0	| N bit
-1:	cmp.w	#0x7fff,(%a0)+		| exponent
-	jeq	2f
-	| test for zero
-	moveq	#FPSR_CC_Z-24,%d1
-	tst.l	(%a0)+
-	jne	9f
-	tst.l	(%a0)
-	jne	9f
-	jra	8f
-	| infinitiv and NAN
-2:	moveq	#FPSR_CC_NAN-24,%d1
-	move.l	(%a0)+,%d2
-	lsl.l	#1,%d2			| ignore high bit
-	jne	8f
-	tst.l	(%a0)
-	jne	8f
-	moveq	#FPSR_CC_INF-24,%d1
-8:	bset	%d1,%d0
-9:	move.b	%d0,(FPD_FPSR+0,FPDATA)	| set condition test result
-	| move instructions enter here
-	| Here, we test things in the exception status byte, and set
-	| other things in the accrued exception byte accordingly.
-	| Emulated instructions can set various things in the former,
-	| as defined in fp_emu.h.
-fp_final:
-	move.l	(FPD_FPSR,FPDATA),%d0
-#if 0
-	btst	#FPSR_EXC_SNAN,%d0	| EXC_SNAN
-	jne	1f
-	btst	#FPSR_EXC_OPERR,%d0	| EXC_OPERR
-	jeq	2f
-1:	bset	#FPSR_AEXC_IOP,%d0	| set IOP bit
-2:	btst	#FPSR_EXC_OVFL,%d0	| EXC_OVFL
-	jeq	1f
-	bset	#FPSR_AEXC_OVFL,%d0	| set OVFL bit
-1:	btst	#FPSR_EXC_UNFL,%d0	| EXC_UNFL
-	jeq	1f
-	btst	#FPSR_EXC_INEX2,%d0	| EXC_INEX2
-	jeq	1f
-	bset	#FPSR_AEXC_UNFL,%d0	| set UNFL bit
-1:	btst	#FPSR_EXC_DZ,%d0	| EXC_INEX1
-	jeq	1f
-	bset	#FPSR_AEXC_DZ,%d0	| set DZ bit
-1:	btst	#FPSR_EXC_OVFL,%d0	| EXC_OVFL
-	jne	1f
-	btst	#FPSR_EXC_INEX2,%d0	| EXC_INEX2
-	jne	1f
-	btst	#FPSR_EXC_INEX1,%d0	| EXC_INEX1
-	jeq	2f
-1:	bset	#FPSR_AEXC_INEX,%d0	| set INEX bit
-2:	move.l	%d0,(FPD_FPSR,FPDATA)
-#else
-	| same as above, greatly optimized, but untested (yet)
-	move.l	%d0,%d2
-	lsr.l	#5,%d0
-	move.l	%d0,%d1
-	lsr.l	#4,%d1
-	or.l	%d0,%d1
-	and.b	#0x08,%d1
-	move.l	%d2,%d0
-	lsr.l	#6,%d0
-	or.l	%d1,%d0
-	move.l	%d2,%d1
-	lsr.l	#4,%d1
-	or.b	#0xdf,%d1
-	and.b	%d1,%d0
-	move.l	%d2,%d1
-	lsr.l	#7,%d1
-	and.b	#0x80,%d1
-	or.b	%d1,%d0
-	and.b	#0xf8,%d0
-	or.b	%d0,%d2
-	move.l	%d2,(FPD_FPSR,FPDATA)
-#endif
-	move.b	(FPD_FPSR+2,FPDATA),%d0
-	and.b	(FPD_FPCR+2,FPDATA),%d0
-	jeq	1f
-	printf	,"send signal!!!\n"
-1:	jra	fp_end
diff --git a/ANDROID_3.4.5/arch/m68k/math-emu/multi_arith.h b/ANDROID_3.4.5/arch/m68k/math-emu/multi_arith.h
deleted file mode 100644
index 4b5eb3d8..00000000
--- a/ANDROID_3.4.5/arch/m68k/math-emu/multi_arith.h
+++ /dev/null
@@ -1,289 +0,0 @@
-/* multi_arith.h: multi-precision integer arithmetic functions, needed
-   to do extended-precision floating point.
-
-   (c) 1998 David Huggins-Daines.
-
-   Somewhat based on arch/alpha/math-emu/ieee-math.c, which is (c)
-   David Mosberger-Tang.
-
-   You may copy, modify, and redistribute this file under the terms of
-   the GNU General Public License, version 2, or any later version, at
-   your convenience. */
-
-/* Note:
-
-   These are not general multi-precision math routines.  Rather, they
-   implement the subset of integer arithmetic that we need in order to
-   multiply, divide, and normalize 128-bit unsigned mantissae.  */
-
-#ifndef MULTI_ARITH_H
-#define MULTI_ARITH_H
-
-static inline void fp_denormalize(struct fp_ext *reg, unsigned int cnt)
-{
-	reg->exp += cnt;
-
-	switch (cnt) {
-	case 0 ... 8:
-		reg->lowmant = reg->mant.m32[1] << (8 - cnt);
-		reg->mant.m32[1] = (reg->mant.m32[1] >> cnt) |
-				   (reg->mant.m32[0] << (32 - cnt));
-		reg->mant.m32[0] = reg->mant.m32[0] >> cnt;
-		break;
-	case 9 ... 32:
-		reg->lowmant = reg->mant.m32[1] >> (cnt - 8);
-		if (reg->mant.m32[1] << (40 - cnt))
-			reg->lowmant |= 1;
-		reg->mant.m32[1] = (reg->mant.m32[1] >> cnt) |
-				   (reg->mant.m32[0] << (32 - cnt));
-		reg->mant.m32[0] = reg->mant.m32[0] >> cnt;
-		break;
-	case 33 ... 39:
-		asm volatile ("bfextu %1{%2,#8},%0" : "=d" (reg->lowmant)
-			: "m" (reg->mant.m32[0]), "d" (64 - cnt));
-		if (reg->mant.m32[1] << (40 - cnt))
-			reg->lowmant |= 1;
-		reg->mant.m32[1] = reg->mant.m32[0] >> (cnt - 32);
-		reg->mant.m32[0] = 0;
-		break;
-	case 40 ... 71:
-		reg->lowmant = reg->mant.m32[0] >> (cnt - 40);
-		if ((reg->mant.m32[0] << (72 - cnt)) || reg->mant.m32[1])
-			reg->lowmant |= 1;
-		reg->mant.m32[1] = reg->mant.m32[0] >> (cnt - 32);
-		reg->mant.m32[0] = 0;
-		break;
-	default:
-		reg->lowmant = reg->mant.m32[0] || reg->mant.m32[1];
-		reg->mant.m32[0] = 0;
-		reg->mant.m32[1] = 0;
-		break;
-	}
-}
-
-static inline int fp_overnormalize(struct fp_ext *reg)
-{
-	int shift;
-
-	if (reg->mant.m32[0]) {
-		asm ("bfffo %1{#0,#32},%0" : "=d" (shift) : "dm" (reg->mant.m32[0]));
-		reg->mant.m32[0] = (reg->mant.m32[0] << shift) | (reg->mant.m32[1] >> (32 - shift));
-		reg->mant.m32[1] = (reg->mant.m32[1] << shift);
-	} else {
-		asm ("bfffo %1{#0,#32},%0" : "=d" (shift) : "dm" (reg->mant.m32[1]));
-		reg->mant.m32[0] = (reg->mant.m32[1] << shift);
-		reg->mant.m32[1] = 0;
-		shift += 32;
-	}
-
-	return shift;
-}
-
-static inline int fp_addmant(struct fp_ext *dest, struct fp_ext *src)
-{
-	int carry;
-
-	/* we assume here, gcc only insert move and a clr instr */
-	asm volatile ("add.b %1,%0" : "=d,g" (dest->lowmant)
-		: "g,d" (src->lowmant), "0,0" (dest->lowmant));
-	asm volatile ("addx.l %1,%0" : "=d" (dest->mant.m32[1])
-		: "d" (src->mant.m32[1]), "0" (dest->mant.m32[1]));
-	asm volatile ("addx.l %1,%0" : "=d" (dest->mant.m32[0])
-		: "d" (src->mant.m32[0]), "0" (dest->mant.m32[0]));
-	asm volatile ("addx.l %0,%0" : "=d" (carry) : "0" (0));
-
-	return carry;
-}
-
-static inline int fp_addcarry(struct fp_ext *reg)
-{
-	if (++reg->exp == 0x7fff) {
-		if (reg->mant.m64)
-			fp_set_sr(FPSR_EXC_INEX2);
-		reg->mant.m64 = 0;
-		fp_set_sr(FPSR_EXC_OVFL);
-		return 0;
-	}
-	reg->lowmant = (reg->mant.m32[1] << 7) | (reg->lowmant ? 1 : 0);
-	reg->mant.m32[1] = (reg->mant.m32[1] >> 1) |
-			   (reg->mant.m32[0] << 31);
-	reg->mant.m32[0] = (reg->mant.m32[0] >> 1) | 0x80000000;
-
-	return 1;
-}
-
-static inline void fp_submant(struct fp_ext *dest, struct fp_ext *src1,
-			      struct fp_ext *src2)
-{
-	/* we assume here, gcc only insert move and a clr instr */
-	asm volatile ("sub.b %1,%0" : "=d,g" (dest->lowmant)
-		: "g,d" (src2->lowmant), "0,0" (src1->lowmant));
-	asm volatile ("subx.l %1,%0" : "=d" (dest->mant.m32[1])
-		: "d" (src2->mant.m32[1]), "0" (src1->mant.m32[1]));
-	asm volatile ("subx.l %1,%0" : "=d" (dest->mant.m32[0])
-		: "d" (src2->mant.m32[0]), "0" (src1->mant.m32[0]));
-}
-
-#define fp_mul64(desth, destl, src1, src2) ({				\
-	asm ("mulu.l %2,%1:%0" : "=d" (destl), "=d" (desth)		\
-		: "dm" (src1), "0" (src2));				\
-})
-#define fp_div64(quot, rem, srch, srcl, div)				\
-	asm ("divu.l %2,%1:%0" : "=d" (quot), "=d" (rem)		\
-		: "dm" (div), "1" (srch), "0" (srcl))
-#define fp_add64(dest1, dest2, src1, src2) ({				\
-	asm ("add.l %1,%0" : "=d,dm" (dest2)				\
-		: "dm,d" (src2), "0,0" (dest2));			\
-	asm ("addx.l %1,%0" : "=d" (dest1)				\
-		: "d" (src1), "0" (dest1));				\
-})
-#define fp_addx96(dest, src) ({						\
-	/* we assume here, gcc only insert move and a clr instr */	\
-	asm volatile ("add.l %1,%0" : "=d,g" (dest->m32[2])		\
-		: "g,d" (temp.m32[1]), "0,0" (dest->m32[2]));		\
-	asm volatile ("addx.l %1,%0" : "=d" (dest->m32[1])		\
-		: "d" (temp.m32[0]), "0" (dest->m32[1]));		\
-	asm volatile ("addx.l %1,%0" : "=d" (dest->m32[0])		\
-		: "d" (0), "0" (dest->m32[0]));				\
-})
-#define fp_sub64(dest, src) ({						\
-	asm ("sub.l %1,%0" : "=d,dm" (dest.m32[1])			\
-		: "dm,d" (src.m32[1]), "0,0" (dest.m32[1]));		\
-	asm ("subx.l %1,%0" : "=d" (dest.m32[0])			\
-		: "d" (src.m32[0]), "0" (dest.m32[0]));			\
-})
-#define fp_sub96c(dest, srch, srcm, srcl) ({				\
-	char carry;							\
-	asm ("sub.l %1,%0" : "=d,dm" (dest.m32[2])			\
-		: "dm,d" (srcl), "0,0" (dest.m32[2]));			\
-	asm ("subx.l %1,%0" : "=d" (dest.m32[1])			\
-		: "d" (srcm), "0" (dest.m32[1]));			\
-	asm ("subx.l %2,%1; scs %0" : "=d" (carry), "=d" (dest.m32[0])	\
-		: "d" (srch), "1" (dest.m32[0]));			\
-	carry;								\
-})
-
-static inline void fp_multiplymant(union fp_mant128 *dest, struct fp_ext *src1,
-				   struct fp_ext *src2)
-{
-	union fp_mant64 temp;
-
-	fp_mul64(dest->m32[0], dest->m32[1], src1->mant.m32[0], src2->mant.m32[0]);
-	fp_mul64(dest->m32[2], dest->m32[3], src1->mant.m32[1], src2->mant.m32[1]);
-
-	fp_mul64(temp.m32[0], temp.m32[1], src1->mant.m32[0], src2->mant.m32[1]);
-	fp_addx96(dest, temp);
-
-	fp_mul64(temp.m32[0], temp.m32[1], src1->mant.m32[1], src2->mant.m32[0]);
-	fp_addx96(dest, temp);
-}
-
-static inline void fp_dividemant(union fp_mant128 *dest, struct fp_ext *src,
-				 struct fp_ext *div)
-{
-	union fp_mant128 tmp;
-	union fp_mant64 tmp64;
-	unsigned long *mantp = dest->m32;
-	unsigned long fix, rem, first, dummy;
-	int i;
-
-	/* the algorithm below requires dest to be smaller than div,
-	   but both have the high bit set */
-	if (src->mant.m64 >= div->mant.m64) {
-		fp_sub64(src->mant, div->mant);
-		*mantp = 1;
-	} else
-		*mantp = 0;
-	mantp++;
-
-	/* basic idea behind this algorithm: we can't divide two 64bit numbers
-	   (AB/CD) directly, but we can calculate AB/C0, but this means this
-	   quotient is off by C0/CD, so we have to multiply the first result
-	   to fix the result, after that we have nearly the correct result
-	   and only a few corrections are needed. */
-
-	/* C0/CD can be precalculated, but it's an 64bit division again, but
-	   we can make it a bit easier, by dividing first through C so we get
-	   10/1D and now only a single shift and the value fits into 32bit. */
-	fix = 0x80000000;
-	dummy = div->mant.m32[1] / div->mant.m32[0] + 1;
-	dummy = (dummy >> 1) | fix;
-	fp_div64(fix, dummy, fix, 0, dummy);
-	fix--;
-
-	for (i = 0; i < 3; i++, mantp++) {
-		if (src->mant.m32[0] == div->mant.m32[0]) {
-			fp_div64(first, rem, 0, src->mant.m32[1], div->mant.m32[0]);
-
-			fp_mul64(*mantp, dummy, first, fix);
-			*mantp += fix;
-		} else {
-			fp_div64(first, rem, src->mant.m32[0], src->mant.m32[1], div->mant.m32[0]);
-
-			fp_mul64(*mantp, dummy, first, fix);
-		}
-
-		fp_mul64(tmp.m32[0], tmp.m32[1], div->mant.m32[0], first - *mantp);
-		fp_add64(tmp.m32[0], tmp.m32[1], 0, rem);
-		tmp.m32[2] = 0;
-
-		fp_mul64(tmp64.m32[0], tmp64.m32[1], *mantp, div->mant.m32[1]);
-		fp_sub96c(tmp, 0, tmp64.m32[0], tmp64.m32[1]);
-
-		src->mant.m32[0] = tmp.m32[1];
-		src->mant.m32[1] = tmp.m32[2];
-
-		while (!fp_sub96c(tmp, 0, div->mant.m32[0], div->mant.m32[1])) {
-			src->mant.m32[0] = tmp.m32[1];
-			src->mant.m32[1] = tmp.m32[2];
-			*mantp += 1;
-		}
-	}
-}
-
-static inline void fp_putmant128(struct fp_ext *dest, union fp_mant128 *src,
-				 int shift)
-{
-	unsigned long tmp;
-
-	switch (shift) {
-	case 0:
-		dest->mant.m64 = src->m64[0];
-		dest->lowmant = src->m32[2] >> 24;
-		if (src->m32[3] || (src->m32[2] << 8))
-			dest->lowmant |= 1;
-		break;
-	case 1:
-		asm volatile ("lsl.l #1,%0"
-			: "=d" (tmp) : "0" (src->m32[2]));
-		asm volatile ("roxl.l #1,%0"
-			: "=d" (dest->mant.m32[1]) : "0" (src->m32[1]));
-		asm volatile ("roxl.l #1,%0"
-			: "=d" (dest->mant.m32[0]) : "0" (src->m32[0]));
-		dest->lowmant = tmp >> 24;
-		if (src->m32[3] || (tmp << 8))
-			dest->lowmant |= 1;
-		break;
-	case 31:
-		asm volatile ("lsr.l #1,%1; roxr.l #1,%0"
-			: "=d" (dest->mant.m32[0])
-			: "d" (src->m32[0]), "0" (src->m32[1]));
-		asm volatile ("roxr.l #1,%0"
-			: "=d" (dest->mant.m32[1]) : "0" (src->m32[2]));
-		asm volatile ("roxr.l #1,%0"
-			: "=d" (tmp) : "0" (src->m32[3]));
-		dest->lowmant = tmp >> 24;
-		if (src->m32[3] << 7)
-			dest->lowmant |= 1;
-		break;
-	case 32:
-		dest->mant.m32[0] = src->m32[1];
-		dest->mant.m32[1] = src->m32[2];
-		dest->lowmant = src->m32[3] >> 24;
-		if (src->m32[3] << 8)
-			dest->lowmant |= 1;
-		break;
-	}
-}
-
-#endif	/* MULTI_ARITH_H */
diff --git a/ANDROID_3.4.5/arch/m68k/mm/Makefile b/ANDROID_3.4.5/arch/m68k/mm/Makefile
deleted file mode 100644
index cfbf3205..00000000
--- a/ANDROID_3.4.5/arch/m68k/mm/Makefile
+++ /dev/null
@@ -1,11 +0,0 @@
-#
-# Makefile for the linux m68k-specific parts of the memory manager.
-#
-
-obj-y	:= init.o
-
-obj-$(CONFIG_MMU)		+= cache.o fault.o
-obj-$(CONFIG_MMU_MOTOROLA)	+= kmap.o memory.o motorola.o hwtest.o
-obj-$(CONFIG_MMU_SUN3)		+= sun3kmap.o sun3mmu.o hwtest.o
-obj-$(CONFIG_MMU_COLDFIRE)	+= kmap.o memory.o mcfmmu.o
-
diff --git a/ANDROID_3.4.5/arch/m68k/mm/cache.c b/ANDROID_3.4.5/arch/m68k/mm/cache.c
deleted file mode 100644
index 3d84c1f2..00000000
--- a/ANDROID_3.4.5/arch/m68k/mm/cache.c
+++ /dev/null
@@ -1,136 +0,0 @@
-/*
- *  linux/arch/m68k/mm/cache.c
- *
- *  Instruction cache handling
- *
- *  Copyright (C) 1995  Hamish Macdonald
- */
-
-#include <linux/module.h>
-#include <asm/pgalloc.h>
-#include <asm/traps.h>
-
-
-static unsigned long virt_to_phys_slow(unsigned long vaddr)
-{
-	if (CPU_IS_060) {
-		unsigned long paddr;
-
-		/* The PLPAR instruction causes an access error if the translation
-		 * is not possible. To catch this we use the same exception mechanism
-		 * as for user space accesses in <asm/uaccess.h>. */
-		asm volatile (".chip 68060\n"
-			      "1: plpar (%0)\n"
-			      ".chip 68k\n"
-			      "2:\n"
-			      ".section .fixup,\"ax\"\n"
-			      "   .even\n"
-			      "3: sub.l %0,%0\n"
-			      "   jra 2b\n"
-			      ".previous\n"
-			      ".section __ex_table,\"a\"\n"
-			      "   .align 4\n"
-			      "   .long 1b,3b\n"
-			      ".previous"
-			      : "=a" (paddr)
-			      : "0" (vaddr));
-		return paddr;
-	} else if (CPU_IS_040) {
-		unsigned long mmusr;
-
-		asm volatile (".chip 68040\n\t"
-			      "ptestr (%1)\n\t"
-			      "movec %%mmusr, %0\n\t"
-			      ".chip 68k"
-			      : "=r" (mmusr)
-			      : "a" (vaddr));
-
-		if (mmusr & MMU_R_040)
-			return (mmusr & PAGE_MASK) | (vaddr & ~PAGE_MASK);
-	} else {
-		unsigned short mmusr;
-		unsigned long *descaddr;
-
-		asm volatile ("ptestr %3,%2@,#7,%0\n\t"
-			      "pmove %%psr,%1"
-			      : "=a&" (descaddr), "=m" (mmusr)
-			      : "a" (vaddr), "d" (get_fs().seg));
-		if (mmusr & (MMU_I|MMU_B|MMU_L))
-			return 0;
-		descaddr = phys_to_virt((unsigned long)descaddr);
-		switch (mmusr & MMU_NUM) {
-		case 1:
-			return (*descaddr & 0xfe000000) | (vaddr & 0x01ffffff);
-		case 2:
-			return (*descaddr & 0xfffc0000) | (vaddr & 0x0003ffff);
-		case 3:
-			return (*descaddr & PAGE_MASK) | (vaddr & ~PAGE_MASK);
-		}
-	}
-	return 0;
-}
-
-/* Push n pages at kernel virtual address and clear the icache */
-/* RZ: use cpush %bc instead of cpush %dc, cinv %ic */
-void flush_icache_range(unsigned long address, unsigned long endaddr)
-{
-	if (CPU_IS_COLDFIRE) {
-		unsigned long start, end;
-		start = address & ICACHE_SET_MASK;
-		end = endaddr & ICACHE_SET_MASK;
-		if (start > end) {
-			flush_cf_icache(0, end);
-			end = ICACHE_MAX_ADDR;
-		}
-		flush_cf_icache(start, end);
-	} else if (CPU_IS_040_OR_060) {
-		address &= PAGE_MASK;
-
-		do {
-			asm volatile ("nop\n\t"
-				      ".chip 68040\n\t"
-				      "cpushp %%bc,(%0)\n\t"
-				      ".chip 68k"
-				      : : "a" (virt_to_phys_slow(address)));
-			address += PAGE_SIZE;
-		} while (address < endaddr);
-	} else {
-		unsigned long tmp;
-		asm volatile ("movec %%cacr,%0\n\t"
-			      "orw %1,%0\n\t"
-			      "movec %0,%%cacr"
-			      : "=&d" (tmp)
-			      : "di" (FLUSH_I));
-	}
-}
-EXPORT_SYMBOL(flush_icache_range);
-
-void flush_icache_user_range(struct vm_area_struct *vma, struct page *page,
-			     unsigned long addr, int len)
-{
-	if (CPU_IS_COLDFIRE) {
-		unsigned long start, end;
-		start = addr & ICACHE_SET_MASK;
-		end = (addr + len) & ICACHE_SET_MASK;
-		if (start > end) {
-			flush_cf_icache(0, end);
-			end = ICACHE_MAX_ADDR;
-		}
-		flush_cf_icache(start, end);
-
-	} else if (CPU_IS_040_OR_060) {
-		asm volatile ("nop\n\t"
-			      ".chip 68040\n\t"
-			      "cpushp %%bc,(%0)\n\t"
-			      ".chip 68k"
-			      : : "a" (page_to_phys(page)));
-	} else {
-		unsigned long tmp;
-		asm volatile ("movec %%cacr,%0\n\t"
-			      "orw %1,%0\n\t"
-			      "movec %0,%%cacr"
-			      : "=&d" (tmp)
-			      : "di" (FLUSH_I));
-	}
-}
-
diff --git a/ANDROID_3.4.5/arch/m68k/mm/fault.c b/ANDROID_3.4.5/arch/m68k/mm/fault.c
deleted file mode 100644
index 6b020a84..00000000
--- a/ANDROID_3.4.5/arch/m68k/mm/fault.c
+++ /dev/null
@@ -1,197 +0,0 @@
-/*
- *  linux/arch/m68k/mm/fault.c
- *
- *  Copyright (C) 1995  Hamish Macdonald
- */
-
-#include <linux/mman.h>
-#include <linux/mm.h>
-#include <linux/kernel.h>
-#include <linux/ptrace.h>
-#include <linux/interrupt.h>
-#include <linux/module.h>
-
-#include <asm/setup.h>
-#include <asm/traps.h>
-#include <asm/uaccess.h>
-#include <asm/pgalloc.h>
-
-extern void die_if_kernel(char *, struct pt_regs *, long);
-
-int send_fault_sig(struct pt_regs *regs)
-{
-	siginfo_t siginfo = { 0, 0, 0, };
-
-	siginfo.si_signo = current->thread.signo;
-	siginfo.si_code = current->thread.code;
-	siginfo.si_addr = (void *)current->thread.faddr;
-#ifdef DEBUG
-	printk("send_fault_sig: %p,%d,%d\n", siginfo.si_addr, siginfo.si_signo, siginfo.si_code);
-#endif
-
-	if (user_mode(regs)) {
-		force_sig_info(siginfo.si_signo,
-			       &siginfo, current);
-	} else {
-		if (handle_kernel_fault(regs))
-			return -1;
-
-		//if (siginfo.si_signo == SIGBUS)
-		//	force_sig_info(siginfo.si_signo,
-		//		       &siginfo, current);
-
-		/*
-		 * Oops. The kernel tried to access some bad page. We'll have to
-		 * terminate things with extreme prejudice.
-		 */
-		if ((unsigned long)siginfo.si_addr < PAGE_SIZE)
-			printk(KERN_ALERT "Unable to handle kernel NULL pointer dereference");
-		else
-			printk(KERN_ALERT "Unable to handle kernel access");
-		printk(" at virtual address %p\n", siginfo.si_addr);
-		die_if_kernel("Oops", regs, 0 /*error_code*/);
-		do_exit(SIGKILL);
-	}
-
-	return 1;
-}
-
-/*
- * This routine handles page faults.  It determines the problem, and
- * then passes it off to one of the appropriate routines.
- *
- * error_code:
- *	bit 0 == 0 means no page found, 1 means protection fault
- *	bit 1 == 0 means read, 1 means write
- *
- * If this routine detects a bad access, it returns 1, otherwise it
- * returns 0.
- */
-int do_page_fault(struct pt_regs *regs, unsigned long address,
-			      unsigned long error_code)
-{
-	struct mm_struct *mm = current->mm;
-	struct vm_area_struct * vma;
-	int write, fault;
-
-#ifdef DEBUG
-	printk ("do page fault:\nregs->sr=%#x, regs->pc=%#lx, address=%#lx, %ld, %p\n",
-		regs->sr, regs->pc, address, error_code,
-		current->mm->pgd);
-#endif
-
-	/*
-	 * If we're in an interrupt or have no user
-	 * context, we must not take the fault..
-	 */
-	if (in_atomic() || !mm)
-		goto no_context;
-
-	down_read(&mm->mmap_sem);
-
-	vma = find_vma(mm, address);
-	if (!vma)
-		goto map_err;
-	if (vma->vm_flags & VM_IO)
-		goto acc_err;
-	if (vma->vm_start <= address)
-		goto good_area;
-	if (!(vma->vm_flags & VM_GROWSDOWN))
-		goto map_err;
-	if (user_mode(regs)) {
-		/* Accessing the stack below usp is always a bug.  The
-		   "+ 256" is there due to some instructions doing
-		   pre-decrement on the stack and that doesn't show up
-		   until later.  */
-		if (address + 256 < rdusp())
-			goto map_err;
-	}
-	if (expand_stack(vma, address))
-		goto map_err;
-
-/*
- * Ok, we have a good vm_area for this memory access, so
- * we can handle it..
- */
-good_area:
-#ifdef DEBUG
-	printk("do_page_fault: good_area\n");
-#endif
-	write = 0;
-	switch (error_code & 3) {
-		default:	/* 3: write, present */
-			/* fall through */
-		case 2:		/* write, not present */
-			if (!(vma->vm_flags & VM_WRITE))
-				goto acc_err;
-			write++;
-			break;
-		case 1:		/* read, present */
-			goto acc_err;
-		case 0:		/* read, not present */
-			if (!(vma->vm_flags & (VM_READ | VM_EXEC | VM_WRITE)))
-				goto acc_err;
-	}
-
-	/*
-	 * If for any reason at all we couldn't handle the fault,
-	 * make sure we exit gracefully rather than endlessly redo
-	 * the fault.
-	 */
-
-	fault = handle_mm_fault(mm, vma, address, write ? FAULT_FLAG_WRITE : 0);
-#ifdef DEBUG
-	printk("handle_mm_fault returns %d\n",fault);
-#endif
-	if (unlikely(fault & VM_FAULT_ERROR)) {
-		if (fault & VM_FAULT_OOM)
-			goto out_of_memory;
-		else if (fault & VM_FAULT_SIGBUS)
-			goto bus_err;
-		BUG();
-	}
-	if (fault & VM_FAULT_MAJOR)
-		current->maj_flt++;
-	else
-		current->min_flt++;
-
-	up_read(&mm->mmap_sem);
-	return 0;
-
-/*
- * We ran out of memory, or some other thing happened to us that made
- * us unable to handle the page fault gracefully.
- */
-out_of_memory:
-	up_read(&mm->mmap_sem);
-	if (!user_mode(regs))
-		goto no_context;
-	pagefault_out_of_memory();
-	return 0;
-
-no_context:
-	current->thread.signo = SIGBUS;
-	current->thread.faddr = address;
-	return send_fault_sig(regs);
-
-bus_err:
-	current->thread.signo = SIGBUS;
-	current->thread.code = BUS_ADRERR;
-	current->thread.faddr = address;
-	goto send_sig;
-
-map_err:
-	current->thread.signo = SIGSEGV;
-	current->thread.code = SEGV_MAPERR;
-	current->thread.faddr = address;
-	goto send_sig;
-
-acc_err:
-	current->thread.signo = SIGSEGV;
-	current->thread.code = SEGV_ACCERR;
-	current->thread.faddr = address;
-
-send_sig:
-	up_read(&mm->mmap_sem);
-	return send_fault_sig(regs);
-}
diff --git a/ANDROID_3.4.5/arch/m68k/mm/hwtest.c b/ANDROID_3.4.5/arch/m68k/mm/hwtest.c
deleted file mode 100644
index 2c7dde3c..00000000
--- a/ANDROID_3.4.5/arch/m68k/mm/hwtest.c
+++ /dev/null
@@ -1,85 +0,0 @@
-/* Tests for presence or absence of hardware registers.
- * This code was originally in atari/config.c, but I noticed
- * that it was also in drivers/nubus/nubus.c and I wanted to
- * use it in hp300/config.c, so it seemed sensible to pull it
- * out into its own file.
- *
- * The test is for use when trying to read a hardware register
- * that isn't present would cause a bus error. We set up a
- * temporary handler so that this doesn't kill the kernel.
- *
- * There is a test-by-reading and a test-by-writing; I present
- * them here complete with the comments from the original atari
- * config.c...
- *                -- PMM <pmaydell@chiark.greenend.org.uk>, 05/1998
- */
-
-/* This function tests for the presence of an address, specially a
- * hardware register address. It is called very early in the kernel
- * initialization process, when the VBR register isn't set up yet. On
- * an Atari, it still points to address 0, which is unmapped. So a bus
- * error would cause another bus error while fetching the exception
- * vector, and the CPU would do nothing at all. So we needed to set up
- * a temporary VBR and a vector table for the duration of the test.
- */
-
-#include <linux/module.h>
-
-int hwreg_present( volatile void *regp )
-{
-    int	ret = 0;
-    long	save_sp, save_vbr;
-    long	tmp_vectors[3];
-
-    __asm__ __volatile__
-	(	"movec	%/vbr,%2\n\t"
-		"movel	#Lberr1,%4@(8)\n\t"
-                "movec	%4,%/vbr\n\t"
-		"movel	%/sp,%1\n\t"
-		"moveq	#0,%0\n\t"
-		"tstb	%3@\n\t"
-		"nop\n\t"
-		"moveq	#1,%0\n"
-                "Lberr1:\n\t"
-		"movel	%1,%/sp\n\t"
-		"movec	%2,%/vbr"
-		: "=&d" (ret), "=&r" (save_sp), "=&r" (save_vbr)
-		: "a" (regp), "a" (tmp_vectors)
-                );
-
-    return( ret );
-}
-EXPORT_SYMBOL(hwreg_present);
-
-/* Basically the same, but writes a value into a word register, protected
- * by a bus error handler. Returns 1 if successful, 0 otherwise.
- */
-
-int hwreg_write( volatile void *regp, unsigned short val )
-{
-	int		ret;
-	long	save_sp, save_vbr;
-	long	tmp_vectors[3];
-
-	__asm__ __volatile__
-	(	"movec	%/vbr,%2\n\t"
-		"movel	#Lberr2,%4@(8)\n\t"
-		"movec	%4,%/vbr\n\t"
-		"movel	%/sp,%1\n\t"
-		"moveq	#0,%0\n\t"
-		"movew	%5,%3@\n\t"
-		"nop	\n\t"	/* If this nop isn't present, 'ret' may already be
-				 * loaded with 1 at the time the bus error
-				 * happens! */
-		"moveq	#1,%0\n"
-	"Lberr2:\n\t"
-		"movel	%1,%/sp\n\t"
-		"movec	%2,%/vbr"
-		: "=&d" (ret), "=&r" (save_sp), "=&r" (save_vbr)
-		: "a" (regp), "a" (tmp_vectors), "g" (val)
-	);
-
-	return( ret );
-}
-EXPORT_SYMBOL(hwreg_write);
-
diff --git a/ANDROID_3.4.5/arch/m68k/mm/init.c b/ANDROID_3.4.5/arch/m68k/mm/init.c
deleted file mode 100644
index 27b5ce08..00000000
--- a/ANDROID_3.4.5/arch/m68k/mm/init.c
+++ /dev/null
@@ -1,5 +0,0 @@
-#ifdef CONFIG_MMU
-#include "init_mm.c"
-#else
-#include "init_no.c"
-#endif
diff --git a/ANDROID_3.4.5/arch/m68k/mm/init_mm.c b/ANDROID_3.4.5/arch/m68k/mm/init_mm.c
deleted file mode 100644
index f77f258d..00000000
--- a/ANDROID_3.4.5/arch/m68k/mm/init_mm.c
+++ /dev/null
@@ -1,176 +0,0 @@
-/*
- *  linux/arch/m68k/mm/init.c
- *
- *  Copyright (C) 1995  Hamish Macdonald
- *
- *  Contains common initialization routines, specific init code moved
- *  to motorola.c and sun3mmu.c
- */
-
-#include <linux/module.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <linux/swap.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/bootmem.h>
-#include <linux/gfp.h>
-
-#include <asm/setup.h>
-#include <asm/uaccess.h>
-#include <asm/page.h>
-#include <asm/pgalloc.h>
-#include <asm/traps.h>
-#include <asm/machdep.h>
-#include <asm/io.h>
-#ifdef CONFIG_ATARI
-#include <asm/atari_stram.h>
-#endif
-#include <asm/sections.h>
-#include <asm/tlb.h>
-
-pg_data_t pg_data_map[MAX_NUMNODES];
-EXPORT_SYMBOL(pg_data_map);
-
-int m68k_virt_to_node_shift;
-
-#ifndef CONFIG_SINGLE_MEMORY_CHUNK
-pg_data_t *pg_data_table[65];
-EXPORT_SYMBOL(pg_data_table);
-#endif
-
-void __init m68k_setup_node(int node)
-{
-#ifndef CONFIG_SINGLE_MEMORY_CHUNK
-	struct mem_info *info = m68k_memory + node;
-	int i, end;
-
-	i = (unsigned long)phys_to_virt(info->addr) >> __virt_to_node_shift();
-	end = (unsigned long)phys_to_virt(info->addr + info->size - 1) >> __virt_to_node_shift();
-	for (; i <= end; i++) {
-		if (pg_data_table[i])
-			printk("overlap at %u for chunk %u\n", i, node);
-		pg_data_table[i] = pg_data_map + node;
-	}
-#endif
-	pg_data_map[node].bdata = bootmem_node_data + node;
-	node_set_online(node);
-}
-
-
-/*
- * ZERO_PAGE is a special page that is used for zero-initialized
- * data and COW.
- */
-
-void *empty_zero_page;
-EXPORT_SYMBOL(empty_zero_page);
-
-extern void init_pointer_table(unsigned long ptable);
-
-/* References to section boundaries */
-
-extern pmd_t *zero_pgtable;
-
-#if defined(CONFIG_MMU) && !defined(CONFIG_COLDFIRE)
-#define VECTORS	&vectors[0]
-#else
-#define VECTORS	_ramvec
-#endif
-
-void __init print_memmap(void)
-{
-#define UL(x) ((unsigned long) (x))
-#define MLK(b, t) UL(b), UL(t), (UL(t) - UL(b)) >> 10
-#define MLM(b, t) UL(b), UL(t), (UL(t) - UL(b)) >> 20
-#define MLK_ROUNDUP(b, t) b, t, DIV_ROUND_UP(((t) - (b)), 1024)
-
-	pr_notice("Virtual kernel memory layout:\n"
-		"    vector  : 0x%08lx - 0x%08lx   (%4ld KiB)\n"
-		"    kmap    : 0x%08lx - 0x%08lx   (%4ld MiB)\n"
-		"    vmalloc : 0x%08lx - 0x%08lx   (%4ld MiB)\n"
-		"    lowmem  : 0x%08lx - 0x%08lx   (%4ld MiB)\n"
-		"      .init : 0x%p" " - 0x%p" "   (%4d KiB)\n"
-		"      .text : 0x%p" " - 0x%p" "   (%4d KiB)\n"
-		"      .data : 0x%p" " - 0x%p" "   (%4d KiB)\n"
-		"      .bss  : 0x%p" " - 0x%p" "   (%4d KiB)\n",
-		MLK(VECTORS, VECTORS + 256),
-		MLM(KMAP_START, KMAP_END),
-		MLM(VMALLOC_START, VMALLOC_END),
-		MLM(PAGE_OFFSET, (unsigned long)high_memory),
-		MLK_ROUNDUP(__init_begin, __init_end),
-		MLK_ROUNDUP(_stext, _etext),
-		MLK_ROUNDUP(_sdata, _edata),
-		MLK_ROUNDUP(_sbss, _ebss));
-}
-
-void __init mem_init(void)
-{
-	pg_data_t *pgdat;
-	int codepages = 0;
-	int datapages = 0;
-	int initpages = 0;
-	int i;
-
-	/* this will put all memory onto the freelists */
-	totalram_pages = num_physpages = 0;
-	for_each_online_pgdat(pgdat) {
-		num_physpages += pgdat->node_present_pages;
-
-		totalram_pages += free_all_bootmem_node(pgdat);
-		for (i = 0; i < pgdat->node_spanned_pages; i++) {
-			struct page *page = pgdat->node_mem_map + i;
-			char *addr = page_to_virt(page);
-
-			if (!PageReserved(page))
-				continue;
-			if (addr >= _text &&
-			    addr < _etext)
-				codepages++;
-			else if (addr >= __init_begin &&
-				 addr < __init_end)
-				initpages++;
-			else
-				datapages++;
-		}
-	}
-
-#if !defined(CONFIG_SUN3) && !defined(CONFIG_COLDFIRE)
-	/* insert pointer tables allocated so far into the tablelist */
-	init_pointer_table((unsigned long)kernel_pg_dir);
-	for (i = 0; i < PTRS_PER_PGD; i++) {
-		if (pgd_present(kernel_pg_dir[i]))
-			init_pointer_table(__pgd_page(kernel_pg_dir[i]));
-	}
-
-	/* insert also pointer table that we used to unmap the zero page */
-	if (zero_pgtable)
-		init_pointer_table((unsigned long)zero_pgtable);
-#endif
-
-	printk("Memory: %luk/%luk available (%dk kernel code, %dk data, %dk init)\n",
-	       nr_free_pages() << (PAGE_SHIFT-10),
-	       totalram_pages << (PAGE_SHIFT-10),
-	       codepages << (PAGE_SHIFT-10),
-	       datapages << (PAGE_SHIFT-10),
-	       initpages << (PAGE_SHIFT-10));
-	print_memmap();
-}
-
-#ifdef CONFIG_BLK_DEV_INITRD
-void free_initrd_mem(unsigned long start, unsigned long end)
-{
-	int pages = 0;
-	for (; start < end; start += PAGE_SIZE) {
-		ClearPageReserved(virt_to_page(start));
-		init_page_count(virt_to_page(start));
-		free_page(start);
-		totalram_pages++;
-		pages++;
-	}
-	printk ("Freeing initrd memory: %dk freed\n", pages);
-}
-#endif
diff --git a/ANDROID_3.4.5/arch/m68k/mm/init_no.c b/ANDROID_3.4.5/arch/m68k/mm/init_no.c
deleted file mode 100644
index 345ec0d8..00000000
--- a/ANDROID_3.4.5/arch/m68k/mm/init_no.c
+++ /dev/null
@@ -1,145 +0,0 @@
-/*
- *  linux/arch/m68knommu/mm/init.c
- *
- *  Copyright (C) 1998  D. Jeff Dionne <jeff@lineo.ca>,
- *                      Kenneth Albanowski <kjahds@kjahds.com>,
- *  Copyright (C) 2000  Lineo, Inc.  (www.lineo.com) 
- *
- *  Based on:
- *
- *  linux/arch/m68k/mm/init.c
- *
- *  Copyright (C) 1995  Hamish Macdonald
- *
- *  JAN/1999 -- hacked to support ColdFire (gerg@snapgear.com)
- *  DEC/2000 -- linux 2.4 support <davidm@snapgear.com>
- */
-
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/types.h>
-#include <linux/ptrace.h>
-#include <linux/mman.h>
-#include <linux/mm.h>
-#include <linux/swap.h>
-#include <linux/init.h>
-#include <linux/highmem.h>
-#include <linux/pagemap.h>
-#include <linux/bootmem.h>
-#include <linux/gfp.h>
-
-#include <asm/setup.h>
-#include <asm/sections.h>
-#include <asm/segment.h>
-#include <asm/page.h>
-#include <asm/pgtable.h>
-#include <asm/machdep.h>
-
-/*
- * ZERO_PAGE is a special page that is used for zero-initialized
- * data and COW.
- */
-void *empty_zero_page;
-
-/*
- * paging_init() continues the virtual memory environment setup which
- * was begun by the code in arch/head.S.
- * The parameters are pointers to where to stick the starting and ending
- * addresses of available kernel virtual memory.
- */
-void __init paging_init(void)
-{
-	/*
-	 * Make sure start_mem is page aligned, otherwise bootmem and
-	 * page_alloc get different views of the world.
-	 */
-	unsigned long end_mem   = memory_end & PAGE_MASK;
-	unsigned long zones_size[MAX_NR_ZONES] = {0, };
-
-	empty_zero_page = alloc_bootmem_pages(PAGE_SIZE);
-	memset(empty_zero_page, 0, PAGE_SIZE);
-
-	/*
-	 * Set up SFC/DFC registers (user data space).
-	 */
-	set_fs (USER_DS);
-
-	zones_size[ZONE_DMA] = (end_mem - PAGE_OFFSET) >> PAGE_SHIFT;
-	free_area_init(zones_size);
-}
-
-void __init mem_init(void)
-{
-	int codek = 0, datak = 0, initk = 0;
-	unsigned long tmp;
-	unsigned long len = _ramend - _rambase;
-	unsigned long start_mem = memory_start; /* DAVIDM - these must start at end of kernel */
-	unsigned long end_mem   = memory_end; /* DAVIDM - this must not include kernel stack at top */
-
-	pr_debug("Mem_init: start=%lx, end=%lx\n", start_mem, end_mem);
-
-	end_mem &= PAGE_MASK;
-	high_memory = (void *) end_mem;
-
-	start_mem = PAGE_ALIGN(start_mem);
-	max_mapnr = num_physpages = (((unsigned long) high_memory) - PAGE_OFFSET) >> PAGE_SHIFT;
-
-	/* this will put all memory onto the freelists */
-	totalram_pages = free_all_bootmem();
-
-	codek = (_etext - _stext) >> 10;
-	datak = (_ebss - _sdata) >> 10;
-	initk = (__init_begin - __init_end) >> 10;
-
-	tmp = nr_free_pages() << PAGE_SHIFT;
-	printk(KERN_INFO "Memory available: %luk/%luk RAM, (%dk kernel code, %dk data)\n",
-	       tmp >> 10,
-	       len >> 10,
-	       codek,
-	       datak
-	       );
-}
-
-
-#ifdef CONFIG_BLK_DEV_INITRD
-void free_initrd_mem(unsigned long start, unsigned long end)
-{
-	int pages = 0;
-	for (; start < end; start += PAGE_SIZE) {
-		ClearPageReserved(virt_to_page(start));
-		init_page_count(virt_to_page(start));
-		free_page(start);
-		totalram_pages++;
-		pages++;
-	}
-	pr_notice("Freeing initrd memory: %luk freed\n",
-		  pages * (PAGE_SIZE / 1024));
-}
-#endif
-
-void free_initmem(void)
-{
-#ifdef CONFIG_RAMKERNEL
-	unsigned long addr;
-	/*
-	 * The following code should be cool even if these sections
-	 * are not page aligned.
-	 */
-	addr = PAGE_ALIGN((unsigned long) __init_begin);
-	/* next to check that the page we free is not a partial page */
-	for (; addr + PAGE_SIZE < ((unsigned long) __init_end); addr += PAGE_SIZE) {
-		ClearPageReserved(virt_to_page(addr));
-		init_page_count(virt_to_page(addr));
-		free_page(addr);
-		totalram_pages++;
-	}
-	pr_notice("Freeing unused kernel memory: %luk freed (0x%x - 0x%x)\n",
-			(addr - PAGE_ALIGN((unsigned long) __init_begin)) >> 10,
-			(int)(PAGE_ALIGN((unsigned long) __init_begin)),
-			(int)(addr - PAGE_SIZE));
-#endif
-}
-
diff --git a/ANDROID_3.4.5/arch/m68k/mm/kmap.c b/ANDROID_3.4.5/arch/m68k/mm/kmap.c
deleted file mode 100644
index 568cfad3..00000000
--- a/ANDROID_3.4.5/arch/m68k/mm/kmap.c
+++ /dev/null
@@ -1,367 +0,0 @@
-/*
- *  linux/arch/m68k/mm/kmap.c
- *
- *  Copyright (C) 1997 Roman Hodek
- *
- *  10/01/99 cleaned up the code and changing to the same interface
- *	     used by other architectures		/Roman Zippel
- */
-
-#include <linux/module.h>
-#include <linux/mm.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/types.h>
-#include <linux/slab.h>
-#include <linux/vmalloc.h>
-
-#include <asm/setup.h>
-#include <asm/segment.h>
-#include <asm/page.h>
-#include <asm/pgalloc.h>
-#include <asm/io.h>
-
-#undef DEBUG
-
-#define PTRTREESIZE	(256*1024)
-
-/*
- * For 040/060 we can use the virtual memory area like other architectures,
- * but for 020/030 we want to use early termination page descriptor and we
- * can't mix this with normal page descriptors, so we have to copy that code
- * (mm/vmalloc.c) and return appriorate aligned addresses.
- */
-
-#ifdef CPU_M68040_OR_M68060_ONLY
-
-#define IO_SIZE		PAGE_SIZE
-
-static inline struct vm_struct *get_io_area(unsigned long size)
-{
-	return get_vm_area(size, VM_IOREMAP);
-}
-
-
-static inline void free_io_area(void *addr)
-{
-	vfree((void *)(PAGE_MASK & (unsigned long)addr));
-}
-
-#else
-
-#define IO_SIZE		(256*1024)
-
-static struct vm_struct *iolist;
-
-static struct vm_struct *get_io_area(unsigned long size)
-{
-	unsigned long addr;
-	struct vm_struct **p, *tmp, *area;
-
-	area = kmalloc(sizeof(*area), GFP_KERNEL);
-	if (!area)
-		return NULL;
-	addr = KMAP_START;
-	for (p = &iolist; (tmp = *p) ; p = &tmp->next) {
-		if (size + addr < (unsigned long)tmp->addr)
-			break;
-		if (addr > KMAP_END-size) {
-			kfree(area);
-			return NULL;
-		}
-		addr = tmp->size + (unsigned long)tmp->addr;
-	}
-	area->addr = (void *)addr;
-	area->size = size + IO_SIZE;
-	area->next = *p;
-	*p = area;
-	return area;
-}
-
-static inline void free_io_area(void *addr)
-{
-	struct vm_struct **p, *tmp;
-
-	if (!addr)
-		return;
-	addr = (void *)((unsigned long)addr & -IO_SIZE);
-	for (p = &iolist ; (tmp = *p) ; p = &tmp->next) {
-		if (tmp->addr == addr) {
-			*p = tmp->next;
-			__iounmap(tmp->addr, tmp->size);
-			kfree(tmp);
-			return;
-		}
-	}
-}
-
-#endif
-
-/*
- * Map some physical address range into the kernel address space.
- */
-/* Rewritten by Andreas Schwab to remove all races. */
-
-void __iomem *__ioremap(unsigned long physaddr, unsigned long size, int cacheflag)
-{
-	struct vm_struct *area;
-	unsigned long virtaddr, retaddr;
-	long offset;
-	pgd_t *pgd_dir;
-	pmd_t *pmd_dir;
-	pte_t *pte_dir;
-
-	/*
-	 * Don't allow mappings that wrap..
-	 */
-	if (!size || physaddr > (unsigned long)(-size))
-		return NULL;
-
-#ifdef CONFIG_AMIGA
-	if (MACH_IS_AMIGA) {
-		if ((physaddr >= 0x40000000) && (physaddr + size < 0x60000000)
-		    && (cacheflag == IOMAP_NOCACHE_SER))
-			return (void __iomem *)physaddr;
-	}
-#endif
-
-#ifdef DEBUG
-	printk("ioremap: 0x%lx,0x%lx(%d) - ", physaddr, size, cacheflag);
-#endif
-	/*
-	 * Mappings have to be aligned
-	 */
-	offset = physaddr & (IO_SIZE - 1);
-	physaddr &= -IO_SIZE;
-	size = (size + offset + IO_SIZE - 1) & -IO_SIZE;
-
-	/*
-	 * Ok, go for it..
-	 */
-	area = get_io_area(size);
-	if (!area)
-		return NULL;
-
-	virtaddr = (unsigned long)area->addr;
-	retaddr = virtaddr + offset;
-#ifdef DEBUG
-	printk("0x%lx,0x%lx,0x%lx", physaddr, virtaddr, retaddr);
-#endif
-
-	/*
-	 * add cache and table flags to physical address
-	 */
-	if (CPU_IS_040_OR_060) {
-		physaddr |= (_PAGE_PRESENT | _PAGE_GLOBAL040 |
-			     _PAGE_ACCESSED | _PAGE_DIRTY);
-		switch (cacheflag) {
-		case IOMAP_FULL_CACHING:
-			physaddr |= _PAGE_CACHE040;
-			break;
-		case IOMAP_NOCACHE_SER:
-		default:
-			physaddr |= _PAGE_NOCACHE_S;
-			break;
-		case IOMAP_NOCACHE_NONSER:
-			physaddr |= _PAGE_NOCACHE;
-			break;
-		case IOMAP_WRITETHROUGH:
-			physaddr |= _PAGE_CACHE040W;
-			break;
-		}
-	} else {
-		physaddr |= (_PAGE_PRESENT | _PAGE_ACCESSED |
-			     _PAGE_DIRTY | _PAGE_READWRITE);
-		switch (cacheflag) {
-		case IOMAP_NOCACHE_SER:
-		case IOMAP_NOCACHE_NONSER:
-		default:
-			physaddr |= _PAGE_NOCACHE030;
-			break;
-		case IOMAP_FULL_CACHING:
-		case IOMAP_WRITETHROUGH:
-			break;
-		}
-	}
-
-	while ((long)size > 0) {
-#ifdef DEBUG
-		if (!(virtaddr & (PTRTREESIZE-1)))
-			printk ("\npa=%#lx va=%#lx ", physaddr, virtaddr);
-#endif
-		pgd_dir = pgd_offset_k(virtaddr);
-		pmd_dir = pmd_alloc(&init_mm, pgd_dir, virtaddr);
-		if (!pmd_dir) {
-			printk("ioremap: no mem for pmd_dir\n");
-			return NULL;
-		}
-
-		if (CPU_IS_020_OR_030) {
-			pmd_dir->pmd[(virtaddr/PTRTREESIZE) & 15] = physaddr;
-			physaddr += PTRTREESIZE;
-			virtaddr += PTRTREESIZE;
-			size -= PTRTREESIZE;
-		} else {
-			pte_dir = pte_alloc_kernel(pmd_dir, virtaddr);
-			if (!pte_dir) {
-				printk("ioremap: no mem for pte_dir\n");
-				return NULL;
-			}
-
-			pte_val(*pte_dir) = physaddr;
-			virtaddr += PAGE_SIZE;
-			physaddr += PAGE_SIZE;
-			size -= PAGE_SIZE;
-		}
-	}
-#ifdef DEBUG
-	printk("\n");
-#endif
-	flush_tlb_all();
-
-	return (void __iomem *)retaddr;
-}
-EXPORT_SYMBOL(__ioremap);
-
-/*
- * Unmap a ioremap()ed region again
- */
-void iounmap(void __iomem *addr)
-{
-#ifdef CONFIG_AMIGA
-	if ((!MACH_IS_AMIGA) ||
-	    (((unsigned long)addr < 0x40000000) ||
-	     ((unsigned long)addr > 0x60000000)))
-			free_io_area((__force void *)addr);
-#else
-	free_io_area((__force void *)addr);
-#endif
-}
-EXPORT_SYMBOL(iounmap);
-
-/*
- * __iounmap unmaps nearly everything, so be careful
- * it doesn't free currently pointer/page tables anymore but it
- * wans't used anyway and might be added later.
- */
-void __iounmap(void *addr, unsigned long size)
-{
-	unsigned long virtaddr = (unsigned long)addr;
-	pgd_t *pgd_dir;
-	pmd_t *pmd_dir;
-	pte_t *pte_dir;
-
-	while ((long)size > 0) {
-		pgd_dir = pgd_offset_k(virtaddr);
-		if (pgd_bad(*pgd_dir)) {
-			printk("iounmap: bad pgd(%08lx)\n", pgd_val(*pgd_dir));
-			pgd_clear(pgd_dir);
-			return;
-		}
-		pmd_dir = pmd_offset(pgd_dir, virtaddr);
-
-		if (CPU_IS_020_OR_030) {
-			int pmd_off = (virtaddr/PTRTREESIZE) & 15;
-			int pmd_type = pmd_dir->pmd[pmd_off] & _DESCTYPE_MASK;
-
-			if (pmd_type == _PAGE_PRESENT) {
-				pmd_dir->pmd[pmd_off] = 0;
-				virtaddr += PTRTREESIZE;
-				size -= PTRTREESIZE;
-				continue;
-			} else if (pmd_type == 0)
-				continue;
-		}
-
-		if (pmd_bad(*pmd_dir)) {
-			printk("iounmap: bad pmd (%08lx)\n", pmd_val(*pmd_dir));
-			pmd_clear(pmd_dir);
-			return;
-		}
-		pte_dir = pte_offset_kernel(pmd_dir, virtaddr);
-
-		pte_val(*pte_dir) = 0;
-		virtaddr += PAGE_SIZE;
-		size -= PAGE_SIZE;
-	}
-
-	flush_tlb_all();
-}
-
-/*
- * Set new cache mode for some kernel address space.
- * The caller must push data for that range itself, if such data may already
- * be in the cache.
- */
-void kernel_set_cachemode(void *addr, unsigned long size, int cmode)
-{
-	unsigned long virtaddr = (unsigned long)addr;
-	pgd_t *pgd_dir;
-	pmd_t *pmd_dir;
-	pte_t *pte_dir;
-
-	if (CPU_IS_040_OR_060) {
-		switch (cmode) {
-		case IOMAP_FULL_CACHING:
-			cmode = _PAGE_CACHE040;
-			break;
-		case IOMAP_NOCACHE_SER:
-		default:
-			cmode = _PAGE_NOCACHE_S;
-			break;
-		case IOMAP_NOCACHE_NONSER:
-			cmode = _PAGE_NOCACHE;
-			break;
-		case IOMAP_WRITETHROUGH:
-			cmode = _PAGE_CACHE040W;
-			break;
-		}
-	} else {
-		switch (cmode) {
-		case IOMAP_NOCACHE_SER:
-		case IOMAP_NOCACHE_NONSER:
-		default:
-			cmode = _PAGE_NOCACHE030;
-			break;
-		case IOMAP_FULL_CACHING:
-		case IOMAP_WRITETHROUGH:
-			cmode = 0;
-		}
-	}
-
-	while ((long)size > 0) {
-		pgd_dir = pgd_offset_k(virtaddr);
-		if (pgd_bad(*pgd_dir)) {
-			printk("iocachemode: bad pgd(%08lx)\n", pgd_val(*pgd_dir));
-			pgd_clear(pgd_dir);
-			return;
-		}
-		pmd_dir = pmd_offset(pgd_dir, virtaddr);
-
-		if (CPU_IS_020_OR_030) {
-			int pmd_off = (virtaddr/PTRTREESIZE) & 15;
-
-			if ((pmd_dir->pmd[pmd_off] & _DESCTYPE_MASK) == _PAGE_PRESENT) {
-				pmd_dir->pmd[pmd_off] = (pmd_dir->pmd[pmd_off] &
-							 _CACHEMASK040) | cmode;
-				virtaddr += PTRTREESIZE;
-				size -= PTRTREESIZE;
-				continue;
-			}
-		}
-
-		if (pmd_bad(*pmd_dir)) {
-			printk("iocachemode: bad pmd (%08lx)\n", pmd_val(*pmd_dir));
-			pmd_clear(pmd_dir);
-			return;
-		}
-		pte_dir = pte_offset_kernel(pmd_dir, virtaddr);
-
-		pte_val(*pte_dir) = (pte_val(*pte_dir) & _CACHEMASK040) | cmode;
-		virtaddr += PAGE_SIZE;
-		size -= PAGE_SIZE;
-	}
-
-	flush_tlb_all();
-}
-EXPORT_SYMBOL(kernel_set_cachemode);
diff --git a/ANDROID_3.4.5/arch/m68k/mm/mcfmmu.c b/ANDROID_3.4.5/arch/m68k/mm/mcfmmu.c
deleted file mode 100644
index 875b800e..00000000
--- a/ANDROID_3.4.5/arch/m68k/mm/mcfmmu.c
+++ /dev/null
@@ -1,199 +0,0 @@
-/*
- * Based upon linux/arch/m68k/mm/sun3mmu.c
- * Based upon linux/arch/ppc/mm/mmu_context.c
- *
- * Implementations of mm routines specific to the Coldfire MMU.
- *
- * Copyright (c) 2008 Freescale Semiconductor, Inc.
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/string.h>
-#include <linux/bootmem.h>
-
-#include <asm/setup.h>
-#include <asm/page.h>
-#include <asm/pgtable.h>
-#include <asm/mmu_context.h>
-#include <asm/mcf_pgalloc.h>
-#include <asm/tlbflush.h>
-
-#define KMAPAREA(x)	((x >= VMALLOC_START) && (x < KMAP_END))
-
-mm_context_t next_mmu_context;
-unsigned long context_map[LAST_CONTEXT / BITS_PER_LONG + 1];
-atomic_t nr_free_contexts;
-struct mm_struct *context_mm[LAST_CONTEXT+1];
-extern unsigned long num_pages;
-
-void free_initmem(void)
-{
-}
-
-/*
- * ColdFire paging_init derived from sun3.
- */
-void __init paging_init(void)
-{
-	pgd_t *pg_dir;
-	pte_t *pg_table;
-	unsigned long address, size;
-	unsigned long next_pgtable, bootmem_end;
-	unsigned long zones_size[MAX_NR_ZONES];
-	enum zone_type zone;
-	int i;
-
-	empty_zero_page = (void *) alloc_bootmem_pages(PAGE_SIZE);
-	memset((void *) empty_zero_page, 0, PAGE_SIZE);
-
-	pg_dir = swapper_pg_dir;
-	memset(swapper_pg_dir, 0, sizeof(swapper_pg_dir));
-
-	size = num_pages * sizeof(pte_t);
-	size = (size + PAGE_SIZE) & ~(PAGE_SIZE-1);
-	next_pgtable = (unsigned long) alloc_bootmem_pages(size);
-
-	bootmem_end = (next_pgtable + size + PAGE_SIZE) & PAGE_MASK;
-	pg_dir += PAGE_OFFSET >> PGDIR_SHIFT;
-
-	address = PAGE_OFFSET;
-	while (address < (unsigned long)high_memory) {
-		pg_table = (pte_t *) next_pgtable;
-		next_pgtable += PTRS_PER_PTE * sizeof(pte_t);
-		pgd_val(*pg_dir) = (unsigned long) pg_table;
-		pg_dir++;
-
-		/* now change pg_table to kernel virtual addresses */
-		for (i = 0; i < PTRS_PER_PTE; ++i, ++pg_table) {
-			pte_t pte = pfn_pte(virt_to_pfn(address), PAGE_INIT);
-			if (address >= (unsigned long) high_memory)
-				pte_val(pte) = 0;
-
-			set_pte(pg_table, pte);
-			address += PAGE_SIZE;
-		}
-	}
-
-	current->mm = NULL;
-
-	for (zone = 0; zone < MAX_NR_ZONES; zone++)
-		zones_size[zone] = 0x0;
-	zones_size[ZONE_DMA] = num_pages;
-	free_area_init(zones_size);
-}
-
-int cf_tlb_miss(struct pt_regs *regs, int write, int dtlb, int extension_word)
-{
-	unsigned long flags, mmuar, mmutr;
-	struct mm_struct *mm;
-	pgd_t *pgd;
-	pmd_t *pmd;
-	pte_t *pte;
-	int asid;
-
-	local_irq_save(flags);
-
-	mmuar = (dtlb) ? mmu_read(MMUAR) :
-		regs->pc + (extension_word * sizeof(long));
-
-	mm = (!user_mode(regs) && KMAPAREA(mmuar)) ? &init_mm : current->mm;
-	if (!mm) {
-		local_irq_restore(flags);
-		return -1;
-	}
-
-	pgd = pgd_offset(mm, mmuar);
-	if (pgd_none(*pgd))  {
-		local_irq_restore(flags);
-		return -1;
-	}
-
-	pmd = pmd_offset(pgd, mmuar);
-	if (pmd_none(*pmd)) {
-		local_irq_restore(flags);
-		return -1;
-	}
-
-	pte = (KMAPAREA(mmuar)) ? pte_offset_kernel(pmd, mmuar)
-				: pte_offset_map(pmd, mmuar);
-	if (pte_none(*pte) || !pte_present(*pte)) {
-		local_irq_restore(flags);
-		return -1;
-	}
-
-	if (write) {
-		if (!pte_write(*pte)) {
-			local_irq_restore(flags);
-			return -1;
-		}
-		set_pte(pte, pte_mkdirty(*pte));
-	}
-
-	set_pte(pte, pte_mkyoung(*pte));
-	asid = mm->context & 0xff;
-	if (!pte_dirty(*pte) && !KMAPAREA(mmuar))
-		set_pte(pte, pte_wrprotect(*pte));
-
-	mmutr = (mmuar & PAGE_MASK) | (asid << MMUTR_IDN) | MMUTR_V;
-	if ((mmuar < TASK_UNMAPPED_BASE) || (mmuar >= TASK_SIZE))
-		mmutr |= (pte->pte & CF_PAGE_MMUTR_MASK) >> CF_PAGE_MMUTR_SHIFT;
-	mmu_write(MMUTR, mmutr);
-
-	mmu_write(MMUDR, (pte_val(*pte) & PAGE_MASK) |
-		((pte->pte) & CF_PAGE_MMUDR_MASK) | MMUDR_SZ_8KB | MMUDR_X);
-
-	if (dtlb)
-		mmu_write(MMUOR, MMUOR_ACC | MMUOR_UAA);
-	else
-		mmu_write(MMUOR, MMUOR_ITLB | MMUOR_ACC | MMUOR_UAA);
-
-	local_irq_restore(flags);
-	return 0;
-}
-
-/*
- * Initialize the context management stuff.
- * The following was taken from arch/ppc/mmu_context.c
- */
-void __init mmu_context_init(void)
-{
-	/*
-	 * Some processors have too few contexts to reserve one for
-	 * init_mm, and require using context 0 for a normal task.
-	 * Other processors reserve the use of context zero for the kernel.
-	 * This code assumes FIRST_CONTEXT < 32.
-	 */
-	context_map[0] = (1 << FIRST_CONTEXT) - 1;
-	next_mmu_context = FIRST_CONTEXT;
-	atomic_set(&nr_free_contexts, LAST_CONTEXT - FIRST_CONTEXT + 1);
-}
-
-/*
- * Steal a context from a task that has one at the moment.
- * This is only used on 8xx and 4xx and we presently assume that
- * they don't do SMP.  If they do then thicfpgalloc.hs will have to check
- * whether the MM we steal is in use.
- * We also assume that this is only used on systems that don't
- * use an MMU hash table - this is true for 8xx and 4xx.
- * This isn't an LRU system, it just frees up each context in
- * turn (sort-of pseudo-random replacement :).  This would be the
- * place to implement an LRU scheme if anyone was motivated to do it.
- *  -- paulus
- */
-void steal_context(void)
-{
-	struct mm_struct *mm;
-	/*
-	 * free up context `next_mmu_context'
-	 * if we shouldn't free context 0, don't...
-	 */
-	if (next_mmu_context < FIRST_CONTEXT)
-		next_mmu_context = FIRST_CONTEXT;
-	mm = context_mm[next_mmu_context];
-	flush_tlb_mm(mm);
-	destroy_context(mm);
-}
-
diff --git a/ANDROID_3.4.5/arch/m68k/mm/memory.c b/ANDROID_3.4.5/arch/m68k/mm/memory.c
deleted file mode 100644
index 250b8b78..00000000
--- a/ANDROID_3.4.5/arch/m68k/mm/memory.c
+++ /dev/null
@@ -1,298 +0,0 @@
-/*
- *  linux/arch/m68k/mm/memory.c
- *
- *  Copyright (C) 1995  Hamish Macdonald
- */
-
-#include <linux/module.h>
-#include <linux/mm.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/pagemap.h>
-#include <linux/gfp.h>
-
-#include <asm/setup.h>
-#include <asm/segment.h>
-#include <asm/page.h>
-#include <asm/pgalloc.h>
-#include <asm/traps.h>
-#include <asm/machdep.h>
-
-
-/* ++andreas: {get,free}_pointer_table rewritten to use unused fields from
-   struct page instead of separately kmalloced struct.  Stolen from
-   arch/sparc/mm/srmmu.c ... */
-
-typedef struct list_head ptable_desc;
-static LIST_HEAD(ptable_list);
-
-#define PD_PTABLE(page) ((ptable_desc *)&(virt_to_page(page)->lru))
-#define PD_PAGE(ptable) (list_entry(ptable, struct page, lru))
-#define PD_MARKBITS(dp) (*(unsigned char *)&PD_PAGE(dp)->index)
-
-#define PTABLE_SIZE (PTRS_PER_PMD * sizeof(pmd_t))
-
-void __init init_pointer_table(unsigned long ptable)
-{
-	ptable_desc *dp;
-	unsigned long page = ptable & PAGE_MASK;
-	unsigned char mask = 1 << ((ptable - page)/PTABLE_SIZE);
-
-	dp = PD_PTABLE(page);
-	if (!(PD_MARKBITS(dp) & mask)) {
-		PD_MARKBITS(dp) = 0xff;
-		list_add(dp, &ptable_list);
-	}
-
-	PD_MARKBITS(dp) &= ~mask;
-#ifdef DEBUG
-	printk("init_pointer_table: %lx, %x\n", ptable, PD_MARKBITS(dp));
-#endif
-
-	/* unreserve the page so it's possible to free that page */
-	PD_PAGE(dp)->flags &= ~(1 << PG_reserved);
-	init_page_count(PD_PAGE(dp));
-
-	return;
-}
-
-pmd_t *get_pointer_table (void)
-{
-	ptable_desc *dp = ptable_list.next;
-	unsigned char mask = PD_MARKBITS (dp);
-	unsigned char tmp;
-	unsigned int off;
-
-	/*
-	 * For a pointer table for a user process address space, a
-	 * table is taken from a page allocated for the purpose.  Each
-	 * page can hold 8 pointer tables.  The page is remapped in
-	 * virtual address space to be noncacheable.
-	 */
-	if (mask == 0) {
-		void *page;
-		ptable_desc *new;
-
-		if (!(page = (void *)get_zeroed_page(GFP_KERNEL)))
-			return NULL;
-
-		flush_tlb_kernel_page(page);
-		nocache_page(page);
-
-		new = PD_PTABLE(page);
-		PD_MARKBITS(new) = 0xfe;
-		list_add_tail(new, dp);
-
-		return (pmd_t *)page;
-	}
-
-	for (tmp = 1, off = 0; (mask & tmp) == 0; tmp <<= 1, off += PTABLE_SIZE)
-		;
-	PD_MARKBITS(dp) = mask & ~tmp;
-	if (!PD_MARKBITS(dp)) {
-		/* move to end of list */
-		list_move_tail(dp, &ptable_list);
-	}
-	return (pmd_t *) (page_address(PD_PAGE(dp)) + off);
-}
-
-int free_pointer_table (pmd_t *ptable)
-{
-	ptable_desc *dp;
-	unsigned long page = (unsigned long)ptable & PAGE_MASK;
-	unsigned char mask = 1 << (((unsigned long)ptable - page)/PTABLE_SIZE);
-
-	dp = PD_PTABLE(page);
-	if (PD_MARKBITS (dp) & mask)
-		panic ("table already free!");
-
-	PD_MARKBITS (dp) |= mask;
-
-	if (PD_MARKBITS(dp) == 0xff) {
-		/* all tables in page are free, free page */
-		list_del(dp);
-		cache_page((void *)page);
-		free_page (page);
-		return 1;
-	} else if (ptable_list.next != dp) {
-		/*
-		 * move this descriptor to the front of the list, since
-		 * it has one or more free tables.
-		 */
-		list_move(dp, &ptable_list);
-	}
-	return 0;
-}
-
-/* invalidate page in both caches */
-static inline void clear040(unsigned long paddr)
-{
-	asm volatile (
-		"nop\n\t"
-		".chip 68040\n\t"
-		"cinvp %%bc,(%0)\n\t"
-		".chip 68k"
-		: : "a" (paddr));
-}
-
-/* invalidate page in i-cache */
-static inline void cleari040(unsigned long paddr)
-{
-	asm volatile (
-		"nop\n\t"
-		".chip 68040\n\t"
-		"cinvp %%ic,(%0)\n\t"
-		".chip 68k"
-		: : "a" (paddr));
-}
-
-/* push page in both caches */
-/* RZ: cpush %bc DOES invalidate %ic, regardless of DPI */
-static inline void push040(unsigned long paddr)
-{
-	asm volatile (
-		"nop\n\t"
-		".chip 68040\n\t"
-		"cpushp %%bc,(%0)\n\t"
-		".chip 68k"
-		: : "a" (paddr));
-}
-
-/* push and invalidate page in both caches, must disable ints
- * to avoid invalidating valid data */
-static inline void pushcl040(unsigned long paddr)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-	push040(paddr);
-	if (CPU_IS_060)
-		clear040(paddr);
-	local_irq_restore(flags);
-}
-
-/*
- * 040: Hit every page containing an address in the range paddr..paddr+len-1.
- * (Low order bits of the ea of a CINVP/CPUSHP are "don't care"s).
- * Hit every page until there is a page or less to go. Hit the next page,
- * and the one after that if the range hits it.
- */
-/* ++roman: A little bit more care is required here: The CINVP instruction
- * invalidates cache entries WITHOUT WRITING DIRTY DATA BACK! So the beginning
- * and the end of the region must be treated differently if they are not
- * exactly at the beginning or end of a page boundary. Else, maybe too much
- * data becomes invalidated and thus lost forever. CPUSHP does what we need:
- * it invalidates the page after pushing dirty data to memory. (Thanks to Jes
- * for discovering the problem!)
- */
-/* ... but on the '060, CPUSH doesn't invalidate (for us, since we have set
- * the DPI bit in the CACR; would it cause problems with temporarily changing
- * this?). So we have to push first and then additionally to invalidate.
- */
-
-
-/*
- * cache_clear() semantics: Clear any cache entries for the area in question,
- * without writing back dirty entries first. This is useful if the data will
- * be overwritten anyway, e.g. by DMA to memory. The range is defined by a
- * _physical_ address.
- */
-
-void cache_clear (unsigned long paddr, int len)
-{
-    if (CPU_IS_COLDFIRE) {
-	flush_cf_bcache(0, DCACHE_MAX_ADDR);
-    } else if (CPU_IS_040_OR_060) {
-	int tmp;
-
-	/*
-	 * We need special treatment for the first page, in case it
-	 * is not page-aligned. Page align the addresses to work
-	 * around bug I17 in the 68060.
-	 */
-	if ((tmp = -paddr & (PAGE_SIZE - 1))) {
-	    pushcl040(paddr & PAGE_MASK);
-	    if ((len -= tmp) <= 0)
-		return;
-	    paddr += tmp;
-	}
-	tmp = PAGE_SIZE;
-	paddr &= PAGE_MASK;
-	while ((len -= tmp) >= 0) {
-	    clear040(paddr);
-	    paddr += tmp;
-	}
-	if ((len += tmp))
-	    /* a page boundary gets crossed at the end */
-	    pushcl040(paddr);
-    }
-    else /* 68030 or 68020 */
-	asm volatile ("movec %/cacr,%/d0\n\t"
-		      "oriw %0,%/d0\n\t"
-		      "movec %/d0,%/cacr"
-		      : : "i" (FLUSH_I_AND_D)
-		      : "d0");
-#ifdef CONFIG_M68K_L2_CACHE
-    if(mach_l2_flush)
-	mach_l2_flush(0);
-#endif
-}
-EXPORT_SYMBOL(cache_clear);
-
-
-/*
- * cache_push() semantics: Write back any dirty cache data in the given area,
- * and invalidate the range in the instruction cache. It needs not (but may)
- * invalidate those entries also in the data cache. The range is defined by a
- * _physical_ address.
- */
-
-void cache_push (unsigned long paddr, int len)
-{
-    if (CPU_IS_COLDFIRE) {
-	flush_cf_bcache(0, DCACHE_MAX_ADDR);
-    } else if (CPU_IS_040_OR_060) {
-	int tmp = PAGE_SIZE;
-
-	/*
-         * on 68040 or 68060, push cache lines for pages in the range;
-	 * on the '040 this also invalidates the pushed lines, but not on
-	 * the '060!
-	 */
-	len += paddr & (PAGE_SIZE - 1);
-
-	/*
-	 * Work around bug I17 in the 68060 affecting some instruction
-	 * lines not being invalidated properly.
-	 */
-	paddr &= PAGE_MASK;
-
-	do {
-	    push040(paddr);
-	    paddr += tmp;
-	} while ((len -= tmp) > 0);
-    }
-    /*
-     * 68030/68020 have no writeback cache. On the other hand,
-     * cache_push is actually a superset of cache_clear (the lines
-     * get written back and invalidated), so we should make sure
-     * to perform the corresponding actions. After all, this is getting
-     * called in places where we've just loaded code, or whatever, so
-     * flushing the icache is appropriate; flushing the dcache shouldn't
-     * be required.
-     */
-    else /* 68030 or 68020 */
-	asm volatile ("movec %/cacr,%/d0\n\t"
-		      "oriw %0,%/d0\n\t"
-		      "movec %/d0,%/cacr"
-		      : : "i" (FLUSH_I)
-		      : "d0");
-#ifdef CONFIG_M68K_L2_CACHE
-    if(mach_l2_flush)
-	mach_l2_flush(1);
-#endif
-}
-EXPORT_SYMBOL(cache_push);
-
diff --git a/ANDROID_3.4.5/arch/m68k/mm/motorola.c b/ANDROID_3.4.5/arch/m68k/mm/motorola.c
deleted file mode 100644
index 0dafa693..00000000
--- a/ANDROID_3.4.5/arch/m68k/mm/motorola.c
+++ /dev/null
@@ -1,320 +0,0 @@
-/*
- * linux/arch/m68k/mm/motorola.c
- *
- * Routines specific to the Motorola MMU, originally from:
- * linux/arch/m68k/init.c
- * which are Copyright (C) 1995 Hamish Macdonald
- *
- * Moved 8/20/1999 Sam Creasey
- */
-
-#include <linux/module.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <linux/swap.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/bootmem.h>
-#include <linux/gfp.h>
-
-#include <asm/setup.h>
-#include <asm/uaccess.h>
-#include <asm/page.h>
-#include <asm/pgalloc.h>
-#include <asm/machdep.h>
-#include <asm/io.h>
-#include <asm/dma.h>
-#ifdef CONFIG_ATARI
-#include <asm/atari_stram.h>
-#endif
-#include <asm/sections.h>
-
-#undef DEBUG
-
-#ifndef mm_cachebits
-/*
- * Bits to add to page descriptors for "normal" caching mode.
- * For 68020/030 this is 0.
- * For 68040, this is _PAGE_CACHE040 (cachable, copyback)
- */
-unsigned long mm_cachebits;
-EXPORT_SYMBOL(mm_cachebits);
-#endif
-
-/* size of memory already mapped in head.S */
-#define INIT_MAPPED_SIZE	(4UL<<20)
-
-extern unsigned long availmem;
-
-static pte_t * __init kernel_page_table(void)
-{
-	pte_t *ptablep;
-
-	ptablep = (pte_t *)alloc_bootmem_low_pages(PAGE_SIZE);
-
-	clear_page(ptablep);
-	__flush_page_to_ram(ptablep);
-	flush_tlb_kernel_page(ptablep);
-	nocache_page(ptablep);
-
-	return ptablep;
-}
-
-static pmd_t *last_pgtable __initdata = NULL;
-pmd_t *zero_pgtable __initdata = NULL;
-
-static pmd_t * __init kernel_ptr_table(void)
-{
-	if (!last_pgtable) {
-		unsigned long pmd, last;
-		int i;
-
-		/* Find the last ptr table that was used in head.S and
-		 * reuse the remaining space in that page for further
-		 * ptr tables.
-		 */
-		last = (unsigned long)kernel_pg_dir;
-		for (i = 0; i < PTRS_PER_PGD; i++) {
-			if (!pgd_present(kernel_pg_dir[i]))
-				continue;
-			pmd = __pgd_page(kernel_pg_dir[i]);
-			if (pmd > last)
-				last = pmd;
-		}
-
-		last_pgtable = (pmd_t *)last;
-#ifdef DEBUG
-		printk("kernel_ptr_init: %p\n", last_pgtable);
-#endif
-	}
-
-	last_pgtable += PTRS_PER_PMD;
-	if (((unsigned long)last_pgtable & ~PAGE_MASK) == 0) {
-		last_pgtable = (pmd_t *)alloc_bootmem_low_pages(PAGE_SIZE);
-
-		clear_page(last_pgtable);
-		__flush_page_to_ram(last_pgtable);
-		flush_tlb_kernel_page(last_pgtable);
-		nocache_page(last_pgtable);
-	}
-
-	return last_pgtable;
-}
-
-static void __init map_node(int node)
-{
-#define PTRTREESIZE (256*1024)
-#define ROOTTREESIZE (32*1024*1024)
-	unsigned long physaddr, virtaddr, size;
-	pgd_t *pgd_dir;
-	pmd_t *pmd_dir;
-	pte_t *pte_dir;
-
-	size = m68k_memory[node].size;
-	physaddr = m68k_memory[node].addr;
-	virtaddr = (unsigned long)phys_to_virt(physaddr);
-	physaddr |= m68k_supervisor_cachemode |
-		    _PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_DIRTY;
-	if (CPU_IS_040_OR_060)
-		physaddr |= _PAGE_GLOBAL040;
-
-	while (size > 0) {
-#ifdef DEBUG
-		if (!(virtaddr & (PTRTREESIZE-1)))
-			printk ("\npa=%#lx va=%#lx ", physaddr & PAGE_MASK,
-				virtaddr);
-#endif
-		pgd_dir = pgd_offset_k(virtaddr);
-		if (virtaddr && CPU_IS_020_OR_030) {
-			if (!(virtaddr & (ROOTTREESIZE-1)) &&
-			    size >= ROOTTREESIZE) {
-#ifdef DEBUG
-				printk ("[very early term]");
-#endif
-				pgd_val(*pgd_dir) = physaddr;
-				size -= ROOTTREESIZE;
-				virtaddr += ROOTTREESIZE;
-				physaddr += ROOTTREESIZE;
-				continue;
-			}
-		}
-		if (!pgd_present(*pgd_dir)) {
-			pmd_dir = kernel_ptr_table();
-#ifdef DEBUG
-			printk ("[new pointer %p]", pmd_dir);
-#endif
-			pgd_set(pgd_dir, pmd_dir);
-		} else
-			pmd_dir = pmd_offset(pgd_dir, virtaddr);
-
-		if (CPU_IS_020_OR_030) {
-			if (virtaddr) {
-#ifdef DEBUG
-				printk ("[early term]");
-#endif
-				pmd_dir->pmd[(virtaddr/PTRTREESIZE) & 15] = physaddr;
-				physaddr += PTRTREESIZE;
-			} else {
-				int i;
-#ifdef DEBUG
-				printk ("[zero map]");
-#endif
-				zero_pgtable = kernel_ptr_table();
-				pte_dir = (pte_t *)zero_pgtable;
-				pmd_dir->pmd[0] = virt_to_phys(pte_dir) |
-					_PAGE_TABLE | _PAGE_ACCESSED;
-				pte_val(*pte_dir++) = 0;
-				physaddr += PAGE_SIZE;
-				for (i = 1; i < 64; physaddr += PAGE_SIZE, i++)
-					pte_val(*pte_dir++) = physaddr;
-			}
-			size -= PTRTREESIZE;
-			virtaddr += PTRTREESIZE;
-		} else {
-			if (!pmd_present(*pmd_dir)) {
-#ifdef DEBUG
-				printk ("[new table]");
-#endif
-				pte_dir = kernel_page_table();
-				pmd_set(pmd_dir, pte_dir);
-			}
-			pte_dir = pte_offset_kernel(pmd_dir, virtaddr);
-
-			if (virtaddr) {
-				if (!pte_present(*pte_dir))
-					pte_val(*pte_dir) = physaddr;
-			} else
-				pte_val(*pte_dir) = 0;
-			size -= PAGE_SIZE;
-			virtaddr += PAGE_SIZE;
-			physaddr += PAGE_SIZE;
-		}
-
-	}
-#ifdef DEBUG
-	printk("\n");
-#endif
-}
-
-/*
- * paging_init() continues the virtual memory environment setup which
- * was begun by the code in arch/head.S.
- */
-void __init paging_init(void)
-{
-	unsigned long zones_size[MAX_NR_ZONES] = { 0, };
-	unsigned long min_addr, max_addr;
-	unsigned long addr, size, end;
-	int i;
-
-#ifdef DEBUG
-	printk ("start of paging_init (%p, %lx)\n", kernel_pg_dir, availmem);
-#endif
-
-	/* Fix the cache mode in the page descriptors for the 680[46]0.  */
-	if (CPU_IS_040_OR_060) {
-		int i;
-#ifndef mm_cachebits
-		mm_cachebits = _PAGE_CACHE040;
-#endif
-		for (i = 0; i < 16; i++)
-			pgprot_val(protection_map[i]) |= _PAGE_CACHE040;
-	}
-
-	min_addr = m68k_memory[0].addr;
-	max_addr = min_addr + m68k_memory[0].size;
-	for (i = 1; i < m68k_num_memory;) {
-		if (m68k_memory[i].addr < min_addr) {
-			printk("Ignoring memory chunk at 0x%lx:0x%lx before the first chunk\n",
-				m68k_memory[i].addr, m68k_memory[i].size);
-			printk("Fix your bootloader or use a memfile to make use of this area!\n");
-			m68k_num_memory--;
-			memmove(m68k_memory + i, m68k_memory + i + 1,
-				(m68k_num_memory - i) * sizeof(struct mem_info));
-			continue;
-		}
-		addr = m68k_memory[i].addr + m68k_memory[i].size;
-		if (addr > max_addr)
-			max_addr = addr;
-		i++;
-	}
-	m68k_memoffset = min_addr - PAGE_OFFSET;
-	m68k_virt_to_node_shift = fls(max_addr - min_addr - 1) - 6;
-
-	module_fixup(NULL, __start_fixup, __stop_fixup);
-	flush_icache();
-
-	high_memory = phys_to_virt(max_addr);
-
-	min_low_pfn = availmem >> PAGE_SHIFT;
-	max_low_pfn = max_addr >> PAGE_SHIFT;
-
-	for (i = 0; i < m68k_num_memory; i++) {
-		addr = m68k_memory[i].addr;
-		end = addr + m68k_memory[i].size;
-		m68k_setup_node(i);
-		availmem = PAGE_ALIGN(availmem);
-		availmem += init_bootmem_node(NODE_DATA(i),
-					      availmem >> PAGE_SHIFT,
-					      addr >> PAGE_SHIFT,
-					      end >> PAGE_SHIFT);
-	}
-
-	/*
-	 * Map the physical memory available into the kernel virtual
-	 * address space. First initialize the bootmem allocator with
-	 * the memory we already mapped, so map_node() has something
-	 * to allocate.
-	 */
-	addr = m68k_memory[0].addr;
-	size = m68k_memory[0].size;
-	free_bootmem_node(NODE_DATA(0), availmem, min(INIT_MAPPED_SIZE, size) - (availmem - addr));
-	map_node(0);
-	if (size > INIT_MAPPED_SIZE)
-		free_bootmem_node(NODE_DATA(0), addr + INIT_MAPPED_SIZE, size - INIT_MAPPED_SIZE);
-
-	for (i = 1; i < m68k_num_memory; i++)
-		map_node(i);
-
-	flush_tlb_all();
-
-	/*
-	 * initialize the bad page table and bad page to point
-	 * to a couple of allocated pages
-	 */
-	empty_zero_page = alloc_bootmem_pages(PAGE_SIZE);
-
-	/*
-	 * Set up SFC/DFC registers
-	 */
-	set_fs(KERNEL_DS);
-
-#ifdef DEBUG
-	printk ("before free_area_init\n");
-#endif
-	for (i = 0; i < m68k_num_memory; i++) {
-		zones_size[ZONE_DMA] = m68k_memory[i].size >> PAGE_SHIFT;
-		free_area_init_node(i, zones_size,
-				    m68k_memory[i].addr >> PAGE_SHIFT, NULL);
-		if (node_present_pages(i))
-			node_set_state(i, N_NORMAL_MEMORY);
-	}
-}
-
-void free_initmem(void)
-{
-	unsigned long addr;
-
-	addr = (unsigned long)__init_begin;
-	for (; addr < (unsigned long)__init_end; addr += PAGE_SIZE) {
-		virt_to_page(addr)->flags &= ~(1 << PG_reserved);
-		init_page_count(virt_to_page(addr));
-		free_page(addr);
-		totalram_pages++;
-	}
-}
-
-
diff --git a/ANDROID_3.4.5/arch/m68k/mm/sun3kmap.c b/ANDROID_3.4.5/arch/m68k/mm/sun3kmap.c
deleted file mode 100644
index 3dc41158..00000000
--- a/ANDROID_3.4.5/arch/m68k/mm/sun3kmap.c
+++ /dev/null
@@ -1,161 +0,0 @@
-/*
- * linux/arch/m68k/mm/sun3kmap.c
- *
- * Copyright (C) 2002 Sam Creasey <sammy@sammy.net>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file COPYING in the main directory of this archive
- * for more details.
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/vmalloc.h>
-
-#include <asm/page.h>
-#include <asm/pgtable.h>
-#include <asm/io.h>
-#include <asm/sun3mmu.h>
-
-#undef SUN3_KMAP_DEBUG
-
-#ifdef SUN3_KMAP_DEBUG
-extern void print_pte_vaddr(unsigned long vaddr);
-#endif
-
-extern void mmu_emu_map_pmeg (int context, int vaddr);
-
-static inline void do_page_mapin(unsigned long phys, unsigned long virt,
-				 unsigned long type)
-{
-	unsigned long pte;
-	pte_t ptep;
-
-	ptep = pfn_pte(phys >> PAGE_SHIFT, PAGE_KERNEL);
-	pte = pte_val(ptep);
-	pte |= type;
-
-	sun3_put_pte(virt, pte);
-
-#ifdef SUN3_KMAP_DEBUG
-	print_pte_vaddr(virt);
-#endif
-
-}
-
-static inline void do_pmeg_mapin(unsigned long phys, unsigned long virt,
-				 unsigned long type, int pages)
-{
-
-	if(sun3_get_segmap(virt & ~SUN3_PMEG_MASK) == SUN3_INVALID_PMEG)
-		mmu_emu_map_pmeg(sun3_get_context(), virt);
-
-	while(pages) {
-		do_page_mapin(phys, virt, type);
-		phys += PAGE_SIZE;
-		virt += PAGE_SIZE;
-		pages--;
-	}
-}
-
-void __iomem *sun3_ioremap(unsigned long phys, unsigned long size,
-		   unsigned long type)
-{
-	struct vm_struct *area;
-	unsigned long offset, virt, ret;
-	int pages;
-
-	if(!size)
-		return NULL;
-
-	/* page align */
-	offset = phys & (PAGE_SIZE-1);
-	phys &= ~(PAGE_SIZE-1);
-
-	size += offset;
-	size = PAGE_ALIGN(size);
-	if((area = get_vm_area(size, VM_IOREMAP)) == NULL)
-		return NULL;
-
-#ifdef SUN3_KMAP_DEBUG
-	printk("ioremap: got virt %p size %lx(%lx)\n",
-	       area->addr, size, area->size);
-#endif
-
-	pages = size / PAGE_SIZE;
-	virt = (unsigned long)area->addr;
-	ret = virt + offset;
-
-	while(pages) {
-		int seg_pages;
-
-		seg_pages = (SUN3_PMEG_SIZE - (virt & SUN3_PMEG_MASK)) / PAGE_SIZE;
-		if(seg_pages > pages)
-			seg_pages = pages;
-
-		do_pmeg_mapin(phys, virt, type, seg_pages);
-
-		pages -= seg_pages;
-		phys += seg_pages * PAGE_SIZE;
-		virt += seg_pages * PAGE_SIZE;
-	}
-
-	return (void __iomem *)ret;
-
-}
-EXPORT_SYMBOL(sun3_ioremap);
-
-
-void __iomem *__ioremap(unsigned long phys, unsigned long size, int cache)
-{
-
-	return sun3_ioremap(phys, size, SUN3_PAGE_TYPE_IO);
-
-}
-EXPORT_SYMBOL(__ioremap);
-
-void iounmap(void __iomem *addr)
-{
-	vfree((void *)(PAGE_MASK & (unsigned long)addr));
-}
-EXPORT_SYMBOL(iounmap);
-
-/* sun3_map_test(addr, val) -- Reads a byte from addr, storing to val,
- * trapping the potential read fault.  Returns 0 if the access faulted,
- * 1 on success.
- *
- * This function is primarily used to check addresses on the VME bus.
- *
- * Mucking with the page fault handler seems a little hackish to me, but
- * SunOS, NetBSD, and Mach all implemented this check in such a manner,
- * so I figure we're allowed.
- */
-int sun3_map_test(unsigned long addr, char *val)
-{
-	int ret = 0;
-
-	__asm__ __volatile__
-		(".globl _sun3_map_test_start\n"
-		 "_sun3_map_test_start:\n"
-		 "1: moveb (%2), (%0)\n"
-		 "   moveq #1, %1\n"
-		 "2:\n"
-		 ".section .fixup,\"ax\"\n"
-		 ".even\n"
-		 "3: moveq #0, %1\n"
-		 "   jmp 2b\n"
-		 ".previous\n"
-		 ".section __ex_table,\"a\"\n"
-		 ".align 4\n"
-		 ".long 1b,3b\n"
-		 ".previous\n"
-		 ".globl _sun3_map_test_end\n"
-		 "_sun3_map_test_end:\n"
-		 : "=a"(val), "=r"(ret)
-		 : "a"(addr));
-
-	return ret;
-}
-EXPORT_SYMBOL(sun3_map_test);
diff --git a/ANDROID_3.4.5/arch/m68k/mm/sun3mmu.c b/ANDROID_3.4.5/arch/m68k/mm/sun3mmu.c
deleted file mode 100644
index e0804060..00000000
--- a/ANDROID_3.4.5/arch/m68k/mm/sun3mmu.c
+++ /dev/null
@@ -1,102 +0,0 @@
-/*
- * linux/arch/m68k/mm/sun3mmu.c
- *
- * Implementations of mm routines specific to the sun3 MMU.
- *
- * Moved here 8/20/1999 Sam Creasey
- *
- */
-
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <linux/swap.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/bootmem.h>
-
-#include <asm/setup.h>
-#include <asm/uaccess.h>
-#include <asm/page.h>
-#include <asm/pgtable.h>
-#include <asm/machdep.h>
-#include <asm/io.h>
-
-extern void mmu_emu_init (unsigned long bootmem_end);
-
-const char bad_pmd_string[] = "Bad pmd in pte_alloc: %08lx\n";
-
-extern unsigned long num_pages;
-
-void free_initmem(void)
-{
-}
-
-/* For the sun3 we try to follow the i386 paging_init() more closely */
-/* start_mem and end_mem have PAGE_OFFSET added already */
-/* now sets up tables using sun3 PTEs rather than i386 as before. --m */
-void __init paging_init(void)
-{
-	pgd_t * pg_dir;
-	pte_t * pg_table;
-	int i;
-	unsigned long address;
-	unsigned long next_pgtable;
-	unsigned long bootmem_end;
-	unsigned long zones_size[MAX_NR_ZONES] = { 0, };
-	unsigned long size;
-
-#ifdef TEST_VERIFY_AREA
-	wp_works_ok = 0;
-#endif
-	empty_zero_page = alloc_bootmem_pages(PAGE_SIZE);
-
-	address = PAGE_OFFSET;
-	pg_dir = swapper_pg_dir;
-	memset (swapper_pg_dir, 0, sizeof (swapper_pg_dir));
-	memset (kernel_pg_dir,  0, sizeof (kernel_pg_dir));
-
-	size = num_pages * sizeof(pte_t);
-	size = (size + PAGE_SIZE) & ~(PAGE_SIZE-1);
-
-	next_pgtable = (unsigned long)alloc_bootmem_pages(size);
-	bootmem_end = (next_pgtable + size + PAGE_SIZE) & PAGE_MASK;
-
-	/* Map whole memory from PAGE_OFFSET (0x0E000000) */
-	pg_dir += PAGE_OFFSET >> PGDIR_SHIFT;
-
-	while (address < (unsigned long)high_memory) {
-		pg_table = (pte_t *) __pa (next_pgtable);
-		next_pgtable += PTRS_PER_PTE * sizeof (pte_t);
-		pgd_val(*pg_dir) = (unsigned long) pg_table;
-		pg_dir++;
-
-		/* now change pg_table to kernel virtual addresses */
-		pg_table = (pte_t *) __va ((unsigned long) pg_table);
-		for (i=0; i<PTRS_PER_PTE; ++i, ++pg_table) {
-			pte_t pte = pfn_pte(virt_to_pfn(address), PAGE_INIT);
-			if (address >= (unsigned long)high_memory)
-				pte_val (pte) = 0;
-			set_pte (pg_table, pte);
-			address += PAGE_SIZE;
-		}
-	}
-
-	mmu_emu_init(bootmem_end);
-
-	current->mm = NULL;
-
-	/* memory sizing is a hack stolen from motorola.c..  hope it works for us */
-	zones_size[ZONE_DMA] = ((unsigned long)high_memory - PAGE_OFFSET) >> PAGE_SHIFT;
-
-	/* I really wish I knew why the following change made things better...  -- Sam */
-/*	free_area_init(zones_size); */
-	free_area_init_node(0, zones_size,
-			    (__pa(PAGE_OFFSET) >> PAGE_SHIFT) + 1, NULL);
-
-
-}
-
-
diff --git a/ANDROID_3.4.5/arch/m68k/mvme147/Makefile b/ANDROID_3.4.5/arch/m68k/mvme147/Makefile
deleted file mode 100644
index a36d38db..00000000
--- a/ANDROID_3.4.5/arch/m68k/mvme147/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-#
-# Makefile for Linux arch/m68k/mvme147 source directory
-#
-
-obj-y		:= config.o
diff --git a/ANDROID_3.4.5/arch/m68k/mvme147/config.c b/ANDROID_3.4.5/arch/m68k/mvme147/config.c
deleted file mode 100644
index a41c0914..00000000
--- a/ANDROID_3.4.5/arch/m68k/mvme147/config.c
+++ /dev/null
@@ -1,213 +0,0 @@
-/*
- *  arch/m68k/mvme147/config.c
- *
- *  Copyright (C) 1996 Dave Frascone [chaos@mindspring.com]
- *  Cloned from        Richard Hirst [richard@sleepie.demon.co.uk]
- *
- * Based on:
- *
- *  Copyright (C) 1993 Hamish Macdonald
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file README.legal in the main directory of this archive
- * for more details.
- */
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/tty.h>
-#include <linux/console.h>
-#include <linux/linkage.h>
-#include <linux/init.h>
-#include <linux/major.h>
-#include <linux/genhd.h>
-#include <linux/rtc.h>
-#include <linux/interrupt.h>
-
-#include <asm/bootinfo.h>
-#include <asm/pgtable.h>
-#include <asm/setup.h>
-#include <asm/irq.h>
-#include <asm/traps.h>
-#include <asm/rtc.h>
-#include <asm/machdep.h>
-#include <asm/mvme147hw.h>
-
-
-static void mvme147_get_model(char *model);
-extern void mvme147_sched_init(irq_handler_t handler);
-extern unsigned long mvme147_gettimeoffset (void);
-extern int mvme147_hwclk (int, struct rtc_time *);
-extern int mvme147_set_clock_mmss (unsigned long);
-extern void mvme147_reset (void);
-
-
-static int bcd2int (unsigned char b);
-
-/* Save tick handler routine pointer, will point to xtime_update() in
- * kernel/time/timekeeping.c, called via mvme147_process_int() */
-
-irq_handler_t tick_handler;
-
-
-int mvme147_parse_bootinfo(const struct bi_record *bi)
-{
-	if (bi->tag == BI_VME_TYPE || bi->tag == BI_VME_BRDINFO)
-		return 0;
-	else
-		return 1;
-}
-
-void mvme147_reset(void)
-{
-	printk ("\r\n\nCalled mvme147_reset\r\n");
-	m147_pcc->watchdog = 0x0a;	/* Clear timer */
-	m147_pcc->watchdog = 0xa5;	/* Enable watchdog - 100ms to reset */
-	while (1)
-		;
-}
-
-static void mvme147_get_model(char *model)
-{
-	sprintf(model, "Motorola MVME147");
-}
-
-/*
- * This function is called during kernel startup to initialize
- * the mvme147 IRQ handling routines.
- */
-
-void __init mvme147_init_IRQ(void)
-{
-	m68k_setup_user_interrupt(VEC_USER, 192);
-}
-
-void __init config_mvme147(void)
-{
-	mach_max_dma_address	= 0x01000000;
-	mach_sched_init		= mvme147_sched_init;
-	mach_init_IRQ		= mvme147_init_IRQ;
-	mach_gettimeoffset	= mvme147_gettimeoffset;
-	mach_hwclk		= mvme147_hwclk;
-	mach_set_clock_mmss	= mvme147_set_clock_mmss;
-	mach_reset		= mvme147_reset;
-	mach_get_model		= mvme147_get_model;
-
-	/* Board type is only set by newer versions of vmelilo/tftplilo */
-	if (!vme_brdtype)
-		vme_brdtype = VME_TYPE_MVME147;
-}
-
-
-/* Using pcc tick timer 1 */
-
-static irqreturn_t mvme147_timer_int (int irq, void *dev_id)
-{
-	m147_pcc->t1_int_cntrl = PCC_TIMER_INT_CLR;
-	m147_pcc->t1_int_cntrl = PCC_INT_ENAB|PCC_LEVEL_TIMER1;
-	return tick_handler(irq, dev_id);
-}
-
-
-void mvme147_sched_init (irq_handler_t timer_routine)
-{
-	tick_handler = timer_routine;
-	if (request_irq(PCC_IRQ_TIMER1, mvme147_timer_int, 0, "timer 1", NULL))
-		pr_err("Couldn't register timer interrupt\n");
-
-	/* Init the clock with a value */
-	/* our clock goes off every 6.25us */
-	m147_pcc->t1_preload = PCC_TIMER_PRELOAD;
-	m147_pcc->t1_cntrl = 0x0;	/* clear timer */
-	m147_pcc->t1_cntrl = 0x3;	/* start timer */
-	m147_pcc->t1_int_cntrl = PCC_TIMER_INT_CLR;  /* clear pending ints */
-	m147_pcc->t1_int_cntrl = PCC_INT_ENAB|PCC_LEVEL_TIMER1;
-}
-
-/* This is always executed with interrupts disabled.  */
-/* XXX There are race hazards in this code XXX */
-unsigned long mvme147_gettimeoffset (void)
-{
-	volatile unsigned short *cp = (volatile unsigned short *)0xfffe1012;
-	unsigned short n;
-
-	n = *cp;
-	while (n != *cp)
-		n = *cp;
-
-	n -= PCC_TIMER_PRELOAD;
-	return (unsigned long)n * 25 / 4;
-}
-
-static int bcd2int (unsigned char b)
-{
-	return ((b>>4)*10 + (b&15));
-}
-
-int mvme147_hwclk(int op, struct rtc_time *t)
-{
-#warning check me!
-	if (!op) {
-		m147_rtc->ctrl = RTC_READ;
-		t->tm_year = bcd2int (m147_rtc->bcd_year);
-		t->tm_mon  = bcd2int (m147_rtc->bcd_mth);
-		t->tm_mday = bcd2int (m147_rtc->bcd_dom);
-		t->tm_hour = bcd2int (m147_rtc->bcd_hr);
-		t->tm_min  = bcd2int (m147_rtc->bcd_min);
-		t->tm_sec  = bcd2int (m147_rtc->bcd_sec);
-		m147_rtc->ctrl = 0;
-	}
-	return 0;
-}
-
-int mvme147_set_clock_mmss (unsigned long nowtime)
-{
-	return 0;
-}
-
-/*-------------------  Serial console stuff ------------------------*/
-
-static void scc_delay (void)
-{
-	int n;
-	volatile int trash;
-
-	for (n = 0; n < 20; n++)
-		trash = n;
-}
-
-static void scc_write (char ch)
-{
-	volatile char *p = (volatile char *)M147_SCC_A_ADDR;
-
-	do {
-		scc_delay();
-	}
-	while (!(*p & 4));
-	scc_delay();
-	*p = 8;
-	scc_delay();
-	*p = ch;
-}
-
-
-void m147_scc_write (struct console *co, const char *str, unsigned count)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-
-	while (count--)
-	{
-		if (*str == '\n')
-			scc_write ('\r');
-		scc_write (*str++);
-	}
-	local_irq_restore(flags);
-}
-
-void mvme147_init_console_port (struct console *co, int cflag)
-{
-	co->write    = m147_scc_write;
-}
diff --git a/ANDROID_3.4.5/arch/m68k/mvme16x/Makefile b/ANDROID_3.4.5/arch/m68k/mvme16x/Makefile
deleted file mode 100644
index edb3f6e6..00000000
--- a/ANDROID_3.4.5/arch/m68k/mvme16x/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-#
-# Makefile for Linux arch/m68k/mvme16x source directory
-#
-
-obj-y		:= config.o rtc.o
diff --git a/ANDROID_3.4.5/arch/m68k/mvme16x/config.c b/ANDROID_3.4.5/arch/m68k/mvme16x/config.c
deleted file mode 100644
index b6d7d8a7..00000000
--- a/ANDROID_3.4.5/arch/m68k/mvme16x/config.c
+++ /dev/null
@@ -1,438 +0,0 @@
-/*
- *  arch/m68k/mvme16x/config.c
- *
- *  Copyright (C) 1995 Richard Hirst [richard@sleepie.demon.co.uk]
- *
- * Based on:
- *
- *  linux/amiga/config.c
- *
- *  Copyright (C) 1993 Hamish Macdonald
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file README.legal in the main directory of this archive
- * for more details.
- */
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/seq_file.h>
-#include <linux/tty.h>
-#include <linux/console.h>
-#include <linux/linkage.h>
-#include <linux/init.h>
-#include <linux/major.h>
-#include <linux/genhd.h>
-#include <linux/rtc.h>
-#include <linux/interrupt.h>
-#include <linux/module.h>
-
-#include <asm/bootinfo.h>
-#include <asm/pgtable.h>
-#include <asm/setup.h>
-#include <asm/irq.h>
-#include <asm/traps.h>
-#include <asm/rtc.h>
-#include <asm/machdep.h>
-#include <asm/mvme16xhw.h>
-
-extern t_bdid mvme_bdid;
-
-static MK48T08ptr_t volatile rtc = (MK48T08ptr_t)MVME_RTC_BASE;
-
-static void mvme16x_get_model(char *model);
-extern void mvme16x_sched_init(irq_handler_t handler);
-extern unsigned long mvme16x_gettimeoffset (void);
-extern int mvme16x_hwclk (int, struct rtc_time *);
-extern int mvme16x_set_clock_mmss (unsigned long);
-extern void mvme16x_reset (void);
-
-int bcd2int (unsigned char b);
-
-/* Save tick handler routine pointer, will point to xtime_update() in
- * kernel/time/timekeeping.c, called via mvme16x_process_int() */
-
-static irq_handler_t tick_handler;
-
-
-unsigned short mvme16x_config;
-EXPORT_SYMBOL(mvme16x_config);
-
-
-int mvme16x_parse_bootinfo(const struct bi_record *bi)
-{
-	if (bi->tag == BI_VME_TYPE || bi->tag == BI_VME_BRDINFO)
-		return 0;
-	else
-		return 1;
-}
-
-void mvme16x_reset(void)
-{
-	printk ("\r\n\nCalled mvme16x_reset\r\n"
-			"\r\r\r\r\r\r\r\r\r\r\r\r\r\r\r\r\r\r");
-	/* The string of returns is to delay the reset until the whole
-	 * message is output.  Assert reset bit in GCSR */
-	*(volatile char *)0xfff40107 = 0x80;
-}
-
-static void mvme16x_get_model(char *model)
-{
-    p_bdid p = &mvme_bdid;
-    char suf[4];
-
-    suf[1] = p->brdsuffix[0];
-    suf[2] = p->brdsuffix[1];
-    suf[3] = '\0';
-    suf[0] = suf[1] ? '-' : '\0';
-
-    sprintf(model, "Motorola MVME%x%s", p->brdno, suf);
-}
-
-
-static void mvme16x_get_hardware_list(struct seq_file *m)
-{
-    p_bdid p = &mvme_bdid;
-
-    if (p->brdno == 0x0162 || p->brdno == 0x0172)
-    {
-	unsigned char rev = *(unsigned char *)MVME162_VERSION_REG;
-
-	seq_printf (m, "VMEchip2        %spresent\n",
-			rev & MVME16x_CONFIG_NO_VMECHIP2 ? "NOT " : "");
-	seq_printf (m, "SCSI interface  %spresent\n",
-			rev & MVME16x_CONFIG_NO_SCSICHIP ? "NOT " : "");
-	seq_printf (m, "Ethernet i/f    %spresent\n",
-			rev & MVME16x_CONFIG_NO_ETHERNET ? "NOT " : "");
-    }
-}
-
-/*
- * This function is called during kernel startup to initialize
- * the mvme16x IRQ handling routines.  Should probably ensure
- * that the base vectors for the VMEChip2 and PCCChip2 are valid.
- */
-
-static void __init mvme16x_init_IRQ (void)
-{
-	m68k_setup_user_interrupt(VEC_USER, 192);
-}
-
-#define pcc2chip	((volatile u_char *)0xfff42000)
-#define PccSCCMICR	0x1d
-#define PccSCCTICR	0x1e
-#define PccSCCRICR	0x1f
-#define PccTPIACKR	0x25
-
-#ifdef CONFIG_EARLY_PRINTK
-
-/**** cd2401 registers ****/
-#define CD2401_ADDR	(0xfff45000)
-
-#define CyGFRCR         (0x81)
-#define CyCCR		(0x13)
-#define      CyCLR_CHAN		(0x40)
-#define      CyINIT_CHAN	(0x20)
-#define      CyCHIP_RESET	(0x10)
-#define      CyENB_XMTR		(0x08)
-#define      CyDIS_XMTR		(0x04)
-#define      CyENB_RCVR		(0x02)
-#define      CyDIS_RCVR		(0x01)
-#define CyCAR		(0xee)
-#define CyIER		(0x11)
-#define      CyMdmCh		(0x80)
-#define      CyRxExc		(0x20)
-#define      CyRxData		(0x08)
-#define      CyTxMpty		(0x02)
-#define      CyTxRdy		(0x01)
-#define CyLICR		(0x26)
-#define CyRISR		(0x89)
-#define      CyTIMEOUT		(0x80)
-#define      CySPECHAR		(0x70)
-#define      CyOVERRUN		(0x08)
-#define      CyPARITY		(0x04)
-#define      CyFRAME		(0x02)
-#define      CyBREAK		(0x01)
-#define CyREOIR		(0x84)
-#define CyTEOIR		(0x85)
-#define CyMEOIR		(0x86)
-#define      CyNOTRANS		(0x08)
-#define CyRFOC		(0x30)
-#define CyRDR		(0xf8)
-#define CyTDR		(0xf8)
-#define CyMISR		(0x8b)
-#define CyRISR		(0x89)
-#define CyTISR		(0x8a)
-#define CyMSVR1		(0xde)
-#define CyMSVR2		(0xdf)
-#define      CyDSR		(0x80)
-#define      CyDCD		(0x40)
-#define      CyCTS		(0x20)
-#define      CyDTR		(0x02)
-#define      CyRTS		(0x01)
-#define CyRTPRL		(0x25)
-#define CyRTPRH		(0x24)
-#define CyCOR1		(0x10)
-#define      CyPARITY_NONE	(0x00)
-#define      CyPARITY_E		(0x40)
-#define      CyPARITY_O		(0xC0)
-#define      Cy_5_BITS		(0x04)
-#define      Cy_6_BITS		(0x05)
-#define      Cy_7_BITS		(0x06)
-#define      Cy_8_BITS		(0x07)
-#define CyCOR2		(0x17)
-#define      CyETC		(0x20)
-#define      CyCtsAE		(0x02)
-#define CyCOR3		(0x16)
-#define      Cy_1_STOP		(0x02)
-#define      Cy_2_STOP		(0x04)
-#define CyCOR4		(0x15)
-#define      CyREC_FIFO		(0x0F)  /* Receive FIFO threshold */
-#define CyCOR5		(0x14)
-#define CyCOR6		(0x18)
-#define CyCOR7		(0x07)
-#define CyRBPR		(0xcb)
-#define CyRCOR		(0xc8)
-#define CyTBPR		(0xc3)
-#define CyTCOR		(0xc0)
-#define CySCHR1		(0x1f)
-#define CySCHR2 	(0x1e)
-#define CyTPR		(0xda)
-#define CyPILR1		(0xe3)
-#define CyPILR2		(0xe0)
-#define CyPILR3		(0xe1)
-#define CyCMR		(0x1b)
-#define      CyASYNC		(0x02)
-#define CyLICR          (0x26)
-#define CyLIVR          (0x09)
-#define CySCRL		(0x23)
-#define CySCRH		(0x22)
-#define CyTFTC		(0x80)
-
-static void cons_write(struct console *co, const char *str, unsigned count)
-{
-	volatile unsigned char *base_addr = (u_char *)CD2401_ADDR;
-	volatile u_char sink;
-	u_char ier;
-	int port;
-	u_char do_lf = 0;
-	int i = 0;
-
-	/* Ensure transmitter is enabled! */
-
-	port = 0;
-	base_addr[CyCAR] = (u_char)port;
-	while (base_addr[CyCCR])
-		;
-	base_addr[CyCCR] = CyENB_XMTR;
-
-	ier = base_addr[CyIER];
-	base_addr[CyIER] = CyTxMpty;
-
-	while (1) {
-		if (pcc2chip[PccSCCTICR] & 0x20)
-		{
-			/* We have a Tx int. Acknowledge it */
-			sink = pcc2chip[PccTPIACKR];
-			if ((base_addr[CyLICR] >> 2) == port) {
-				if (i == count) {
-					/* Last char of string is now output */
-					base_addr[CyTEOIR] = CyNOTRANS;
-					break;
-				}
-				if (do_lf) {
-					base_addr[CyTDR] = '\n';
-					str++;
-					i++;
-					do_lf = 0;
-				}
-				else if (*str == '\n') {
-					base_addr[CyTDR] = '\r';
-					do_lf = 1;
-				}
-				else {
-					base_addr[CyTDR] = *str++;
-					i++;
-				}
-				base_addr[CyTEOIR] = 0;
-			}
-			else
-				base_addr[CyTEOIR] = CyNOTRANS;
-		}
-	}
-
-	base_addr[CyIER] = ier;
-}
-
-static struct console cons_info =
-{
-	.name	= "sercon",
-	.write	= cons_write,
-	.flags	= CON_PRINTBUFFER | CON_BOOT,
-	.index	= -1,
-};
-
-static void __init mvme16x_early_console(void)
-{
-	register_console(&cons_info);
-
-	printk(KERN_INFO "MVME16x: early console registered\n");
-}
-#endif
-
-void __init config_mvme16x(void)
-{
-    p_bdid p = &mvme_bdid;
-    char id[40];
-
-    mach_max_dma_address = 0xffffffff;
-    mach_sched_init      = mvme16x_sched_init;
-    mach_init_IRQ        = mvme16x_init_IRQ;
-    mach_gettimeoffset   = mvme16x_gettimeoffset;
-    mach_hwclk           = mvme16x_hwclk;
-    mach_set_clock_mmss	 = mvme16x_set_clock_mmss;
-    mach_reset		 = mvme16x_reset;
-    mach_get_model       = mvme16x_get_model;
-    mach_get_hardware_list = mvme16x_get_hardware_list;
-
-    /* Report board revision */
-
-    if (strncmp("BDID", p->bdid, 4))
-    {
-	printk ("\n\nBug call .BRD_ID returned garbage - giving up\n\n");
-	while (1)
-		;
-    }
-    /* Board type is only set by newer versions of vmelilo/tftplilo */
-    if (vme_brdtype == 0)
-	vme_brdtype = p->brdno;
-
-    mvme16x_get_model(id);
-    printk ("\nBRD_ID: %s   BUG %x.%x %02x/%02x/%02x\n", id, p->rev>>4,
-					p->rev&0xf, p->yr, p->mth, p->day);
-    if (p->brdno == 0x0162 || p->brdno == 0x172)
-    {
-	unsigned char rev = *(unsigned char *)MVME162_VERSION_REG;
-
-	mvme16x_config = rev | MVME16x_CONFIG_GOT_SCCA;
-
-	printk ("MVME%x Hardware status:\n", p->brdno);
-	printk ("    CPU Type           68%s040\n",
-			rev & MVME16x_CONFIG_GOT_FPU ? "" : "LC");
-	printk ("    CPU clock          %dMHz\n",
-			rev & MVME16x_CONFIG_SPEED_32 ? 32 : 25);
-	printk ("    VMEchip2           %spresent\n",
-			rev & MVME16x_CONFIG_NO_VMECHIP2 ? "NOT " : "");
-	printk ("    SCSI interface     %spresent\n",
-			rev & MVME16x_CONFIG_NO_SCSICHIP ? "NOT " : "");
-	printk ("    Ethernet interface %spresent\n",
-			rev & MVME16x_CONFIG_NO_ETHERNET ? "NOT " : "");
-    }
-    else
-    {
-	mvme16x_config = MVME16x_CONFIG_GOT_LP | MVME16x_CONFIG_GOT_CD2401;
-
-	/* Dont allow any interrupts from the CD2401 until the interrupt */
-	/* handlers are installed					 */
-
-	pcc2chip[PccSCCMICR] = 0x10;
-	pcc2chip[PccSCCTICR] = 0x10;
-	pcc2chip[PccSCCRICR] = 0x10;
-#ifdef CONFIG_EARLY_PRINTK
-	mvme16x_early_console();
-#endif
-    }
-}
-
-static irqreturn_t mvme16x_abort_int (int irq, void *dev_id)
-{
-	p_bdid p = &mvme_bdid;
-	unsigned long *new = (unsigned long *)vectors;
-	unsigned long *old = (unsigned long *)0xffe00000;
-	volatile unsigned char uc, *ucp;
-
-	if (p->brdno == 0x0162 || p->brdno == 0x172)
-	{
-		ucp = (volatile unsigned char *)0xfff42043;
-		uc = *ucp | 8;
-		*ucp = uc;
-	}
-	else
-	{
-		*(volatile unsigned long *)0xfff40074 = 0x40000000;
-	}
-	*(new+4) = *(old+4);		/* Illegal instruction */
-	*(new+9) = *(old+9);		/* Trace */
-	*(new+47) = *(old+47);		/* Trap #15 */
-
-	if (p->brdno == 0x0162 || p->brdno == 0x172)
-		*(new+0x5e) = *(old+0x5e);	/* ABORT switch */
-	else
-		*(new+0x6e) = *(old+0x6e);	/* ABORT switch */
-	return IRQ_HANDLED;
-}
-
-static irqreturn_t mvme16x_timer_int (int irq, void *dev_id)
-{
-    *(volatile unsigned char *)0xfff4201b |= 8;
-    return tick_handler(irq, dev_id);
-}
-
-void mvme16x_sched_init (irq_handler_t timer_routine)
-{
-    p_bdid p = &mvme_bdid;
-    int irq;
-
-    tick_handler = timer_routine;
-    /* Using PCCchip2 or MC2 chip tick timer 1 */
-    *(volatile unsigned long *)0xfff42008 = 0;
-    *(volatile unsigned long *)0xfff42004 = 10000;	/* 10ms */
-    *(volatile unsigned char *)0xfff42017 |= 3;
-    *(volatile unsigned char *)0xfff4201b = 0x16;
-    if (request_irq(MVME16x_IRQ_TIMER, mvme16x_timer_int, 0,
-				"timer", mvme16x_timer_int))
-	panic ("Couldn't register timer int");
-
-    if (p->brdno == 0x0162 || p->brdno == 0x172)
-	irq = MVME162_IRQ_ABORT;
-    else
-        irq = MVME167_IRQ_ABORT;
-    if (request_irq(irq, mvme16x_abort_int, 0,
-				"abort", mvme16x_abort_int))
-	panic ("Couldn't register abort int");
-}
-
-
-/* This is always executed with interrupts disabled.  */
-unsigned long mvme16x_gettimeoffset (void)
-{
-    return (*(volatile unsigned long *)0xfff42008);
-}
-
-int bcd2int (unsigned char b)
-{
-	return ((b>>4)*10 + (b&15));
-}
-
-int mvme16x_hwclk(int op, struct rtc_time *t)
-{
-#warning check me!
-	if (!op) {
-		rtc->ctrl = RTC_READ;
-		t->tm_year = bcd2int (rtc->bcd_year);
-		t->tm_mon  = bcd2int (rtc->bcd_mth);
-		t->tm_mday = bcd2int (rtc->bcd_dom);
-		t->tm_hour = bcd2int (rtc->bcd_hr);
-		t->tm_min  = bcd2int (rtc->bcd_min);
-		t->tm_sec  = bcd2int (rtc->bcd_sec);
-		rtc->ctrl = 0;
-	}
-	return 0;
-}
-
-int mvme16x_set_clock_mmss (unsigned long nowtime)
-{
-	return 0;
-}
-
diff --git a/ANDROID_3.4.5/arch/m68k/mvme16x/rtc.c b/ANDROID_3.4.5/arch/m68k/mvme16x/rtc.c
deleted file mode 100644
index 6ef7a81a..00000000
--- a/ANDROID_3.4.5/arch/m68k/mvme16x/rtc.c
+++ /dev/null
@@ -1,164 +0,0 @@
-/*
- *	Real Time Clock interface for Linux on the MVME16x
- *
- * Based on the PC driver by Paul Gortmaker.
- */
-
-#define RTC_VERSION		"1.00"
-
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <linux/miscdevice.h>
-#include <linux/ioport.h>
-#include <linux/capability.h>
-#include <linux/fcntl.h>
-#include <linux/init.h>
-#include <linux/poll.h>
-#include <linux/mc146818rtc.h>	/* For struct rtc_time and ioctls, etc */
-#include <linux/bcd.h>
-#include <asm/mvme16xhw.h>
-
-#include <asm/io.h>
-#include <asm/uaccess.h>
-#include <asm/setup.h>
-
-/*
- *	We sponge a minor off of the misc major. No need slurping
- *	up another valuable major dev number for this. If you add
- *	an ioctl, make sure you don't conflict with SPARC's RTC
- *	ioctls.
- */
-
-static const unsigned char days_in_mo[] =
-{0, 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31};
-
-static atomic_t rtc_ready = ATOMIC_INIT(1);
-
-static long rtc_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
-{
-	volatile MK48T08ptr_t rtc = (MK48T08ptr_t)MVME_RTC_BASE;
-	unsigned long flags;
-	struct rtc_time wtime;
-	void __user *argp = (void __user *)arg;
-
-	switch (cmd) {
-	case RTC_RD_TIME:	/* Read the time/date from RTC	*/
-	{
-		local_irq_save(flags);
-		/* Ensure clock and real-time-mode-register are accessible */
-		rtc->ctrl = RTC_READ;
-		memset(&wtime, 0, sizeof(struct rtc_time));
-		wtime.tm_sec =  bcd2bin(rtc->bcd_sec);
-		wtime.tm_min =  bcd2bin(rtc->bcd_min);
-		wtime.tm_hour = bcd2bin(rtc->bcd_hr);
-		wtime.tm_mday =  bcd2bin(rtc->bcd_dom);
-		wtime.tm_mon =  bcd2bin(rtc->bcd_mth)-1;
-		wtime.tm_year = bcd2bin(rtc->bcd_year);
-		if (wtime.tm_year < 70)
-			wtime.tm_year += 100;
-		wtime.tm_wday = bcd2bin(rtc->bcd_dow)-1;
-		rtc->ctrl = 0;
-		local_irq_restore(flags);
-		return copy_to_user(argp, &wtime, sizeof wtime) ?
-								-EFAULT : 0;
-	}
-	case RTC_SET_TIME:	/* Set the RTC */
-	{
-		struct rtc_time rtc_tm;
-		unsigned char mon, day, hrs, min, sec, leap_yr;
-		unsigned int yrs;
-
-		if (!capable(CAP_SYS_ADMIN))
-			return -EACCES;
-
-		if (copy_from_user(&rtc_tm, argp, sizeof(struct rtc_time)))
-			return -EFAULT;
-
-		yrs = rtc_tm.tm_year;
-		if (yrs < 1900)
-			yrs += 1900;
-		mon = rtc_tm.tm_mon + 1;   /* tm_mon starts at zero */
-		day = rtc_tm.tm_mday;
-		hrs = rtc_tm.tm_hour;
-		min = rtc_tm.tm_min;
-		sec = rtc_tm.tm_sec;
-
-		leap_yr = ((!(yrs % 4) && (yrs % 100)) || !(yrs % 400));
-
-		if ((mon > 12) || (day == 0))
-			return -EINVAL;
-
-		if (day > (days_in_mo[mon] + ((mon == 2) && leap_yr)))
-			return -EINVAL;
-
-		if ((hrs >= 24) || (min >= 60) || (sec >= 60))
-			return -EINVAL;
-
-		if (yrs >= 2070)
-			return -EINVAL;
-
-		local_irq_save(flags);
-		rtc->ctrl     = RTC_WRITE;
-
-		rtc->bcd_sec  = bin2bcd(sec);
-		rtc->bcd_min  = bin2bcd(min);
-		rtc->bcd_hr   = bin2bcd(hrs);
-		rtc->bcd_dom  = bin2bcd(day);
-		rtc->bcd_mth  = bin2bcd(mon);
-		rtc->bcd_year = bin2bcd(yrs%100);
-
-		rtc->ctrl     = 0;
-		local_irq_restore(flags);
-		return 0;
-	}
-	default:
-		return -EINVAL;
-	}
-}
-
-/*
- * We enforce only one user at a time here with the open/close.
- */
-static int rtc_open(struct inode *inode, struct file *file)
-{
-	if( !atomic_dec_and_test(&rtc_ready) )
-	{
-		atomic_inc( &rtc_ready );
-		return -EBUSY;
-	}
-	return 0;
-}
-
-static int rtc_release(struct inode *inode, struct file *file)
-{
-	atomic_inc( &rtc_ready );
-	return 0;
-}
-
-/*
- *	The various file operations we support.
- */
-
-static const struct file_operations rtc_fops = {
-	.unlocked_ioctl	= rtc_ioctl,
-	.open		= rtc_open,
-	.release	= rtc_release,
-	.llseek		= noop_llseek,
-};
-
-static struct miscdevice rtc_dev=
-{
-	.minor =	RTC_MINOR,
-	.name =		"rtc",
-	.fops =		&rtc_fops
-};
-
-static int __init rtc_MK48T08_init(void)
-{
-	if (!MACH_IS_MVME16x)
-		return -ENODEV;
-
-	printk(KERN_INFO "MK48T08 Real Time Clock Driver v%s\n", RTC_VERSION);
-	return misc_register(&rtc_dev);
-}
-module_init(rtc_MK48T08_init);
diff --git a/ANDROID_3.4.5/arch/m68k/platform/5206/Makefile b/ANDROID_3.4.5/arch/m68k/platform/5206/Makefile
deleted file mode 100644
index b5db0562..00000000
--- a/ANDROID_3.4.5/arch/m68k/platform/5206/Makefile
+++ /dev/null
@@ -1,18 +0,0 @@
-#
-# Makefile for the m68knommu linux kernel.
-#
-
-#
-# If you want to play with the HW breakpoints then you will
-# need to add define this,  which will give you a stack backtrace
-# on the console port whenever a DBG interrupt occurs.  You have to
-# set up you HW breakpoints to trigger a DBG interrupt:
-#
-# ccflags-y := -DTRAP_DBG_INTERRUPT
-# asflags-y := -DTRAP_DBG_INTERRUPT
-#
-
-asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
-
-obj-y := config.o gpio.o
-
diff --git a/ANDROID_3.4.5/arch/m68k/platform/5206/config.c b/ANDROID_3.4.5/arch/m68k/platform/5206/config.c
deleted file mode 100644
index 6bfbeebd..00000000
--- a/ANDROID_3.4.5/arch/m68k/platform/5206/config.c
+++ /dev/null
@@ -1,38 +0,0 @@
-/***************************************************************************/
-
-/*
- *	linux/arch/m68knommu/platform/5206/config.c
- *
- *	Copyright (C) 1999-2002, Greg Ungerer (gerg@snapgear.com)
- * 	Copyright (C) 2000-2001, Lineo Inc. (www.lineo.com) 
- */
-
-/***************************************************************************/
-
-#include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <asm/machdep.h>
-#include <asm/coldfire.h>
-#include <asm/mcfsim.h>
-
-/***************************************************************************/
-
-void __init config_BSP(char *commandp, int size)
-{
-#if defined(CONFIG_NETtel)
-	/* Copy command line from FLASH to local buffer... */
-	memcpy(commandp, (char *) 0xf0004000, size);
-	commandp[size-1] = 0;
-#endif /* CONFIG_NETtel */
-
-	mach_sched_init = hw_timer_init;
-
-	/* Only support the external interrupts on their primary level */
-	mcf_mapirq2imr(25, MCFINTC_EINT1);
-	mcf_mapirq2imr(28, MCFINTC_EINT4);
-	mcf_mapirq2imr(31, MCFINTC_EINT7);
-}
-
-/***************************************************************************/
diff --git a/ANDROID_3.4.5/arch/m68k/platform/5206/gpio.c b/ANDROID_3.4.5/arch/m68k/platform/5206/gpio.c
deleted file mode 100644
index b9ab4a12..00000000
--- a/ANDROID_3.4.5/arch/m68k/platform/5206/gpio.c
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * Coldfire generic GPIO support
- *
- * (C) Copyright 2009, Steven King <sfking@fdwdc.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
-*/
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-#include <asm/coldfire.h>
-#include <asm/mcfsim.h>
-#include <asm/mcfgpio.h>
-
-static struct mcf_gpio_chip mcf_gpio_chips[] = {
-	{
-		.gpio_chip			= {
-			.label			= "PP",
-			.request		= mcf_gpio_request,
-			.free			= mcf_gpio_free,
-			.direction_input	= mcf_gpio_direction_input,
-			.direction_output	= mcf_gpio_direction_output,
-			.get			= mcf_gpio_get_value,
-			.set			= mcf_gpio_set_value,
-			.ngpio			= 8,
-		},
-		.pddr				= (void __iomem *) MCFSIM_PADDR,
-		.podr				= (void __iomem *) MCFSIM_PADAT,
-		.ppdr				= (void __iomem *) MCFSIM_PADAT,
-	},
-};
-
-static int __init mcf_gpio_init(void)
-{
-	unsigned i = 0;
-	while (i < ARRAY_SIZE(mcf_gpio_chips))
-		(void)gpiochip_add((struct gpio_chip *)&mcf_gpio_chips[i++]);
-	return 0;
-}
-
-core_initcall(mcf_gpio_init);
diff --git a/ANDROID_3.4.5/arch/m68k/platform/520x/Makefile b/ANDROID_3.4.5/arch/m68k/platform/520x/Makefile
deleted file mode 100644
index ad3f4e5a..00000000
--- a/ANDROID_3.4.5/arch/m68k/platform/520x/Makefile
+++ /dev/null
@@ -1,17 +0,0 @@
-#
-# Makefile for the M5208 specific file.
-#
-
-#
-# If you want to play with the HW breakpoints then you will
-# need to add define this,  which will give you a stack backtrace
-# on the console port whenever a DBG interrupt occurs.  You have to
-# set up you HW breakpoints to trigger a DBG interrupt:
-#
-# ccflags-y := -DTRAP_DBG_INTERRUPT
-# asflags-y := -DTRAP_DBG_INTERRUPT
-#
-
-asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
-
-obj-y := config.o gpio.o
diff --git a/ANDROID_3.4.5/arch/m68k/platform/520x/config.c b/ANDROID_3.4.5/arch/m68k/platform/520x/config.c
deleted file mode 100644
index 09df4b89..00000000
--- a/ANDROID_3.4.5/arch/m68k/platform/520x/config.c
+++ /dev/null
@@ -1,87 +0,0 @@
-/***************************************************************************/
-
-/*
- *  linux/arch/m68knommu/platform/520x/config.c
- *
- *  Copyright (C) 2005,      Freescale (www.freescale.com)
- *  Copyright (C) 2005,      Intec Automation (mike@steroidmicros.com)
- *  Copyright (C) 1999-2007, Greg Ungerer (gerg@snapgear.com)
- *  Copyright (C) 2001-2003, SnapGear Inc. (www.snapgear.com)
- */
-
-/***************************************************************************/
-
-#include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <asm/machdep.h>
-#include <asm/coldfire.h>
-#include <asm/mcfsim.h>
-#include <asm/mcfuart.h>
-
-/***************************************************************************/
-
-#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
-
-static void __init m520x_qspi_init(void)
-{
-	u16 par;
-	/* setup Port QS for QSPI with gpio CS control */
-	writeb(0x3f, MCF_GPIO_PAR_QSPI);
-	/* make U1CTS and U2RTS gpio for cs_control */
-	par = readw(MCF_GPIO_PAR_UART);
-	par &= 0x00ff;
-	writew(par, MCF_GPIO_PAR_UART);
-}
-
-#endif /* IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) */
-
-/***************************************************************************/
-
-static void __init m520x_uarts_init(void)
-{
-	u16 par;
-	u8 par2;
-
-	/* UART0 and UART1 GPIO pin setup */
-	par = readw(MCF_GPIO_PAR_UART);
-	par |= MCF_GPIO_PAR_UART_PAR_UTXD0 | MCF_GPIO_PAR_UART_PAR_URXD0;
-	par |= MCF_GPIO_PAR_UART_PAR_UTXD1 | MCF_GPIO_PAR_UART_PAR_URXD1;
-	writew(par, MCF_GPIO_PAR_UART);
-
-	/* UART1 GPIO pin setup */
-	par2 = readb(MCF_GPIO_PAR_FECI2C);
-	par2 &= ~0x0F;
-	par2 |= MCF_GPIO_PAR_FECI2C_PAR_SCL_UTXD2 |
-		MCF_GPIO_PAR_FECI2C_PAR_SDA_URXD2;
-	writeb(par2, MCF_GPIO_PAR_FECI2C);
-}
-
-/***************************************************************************/
-
-static void __init m520x_fec_init(void)
-{
-	u8 v;
-
-	/* Set multi-function pins to ethernet mode */
-	v = readb(MCF_GPIO_PAR_FEC);
-	writeb(v | 0xf0, MCF_GPIO_PAR_FEC);
-
-	v = readb(MCF_GPIO_PAR_FECI2C);
-	writeb(v | 0x0f, MCF_GPIO_PAR_FECI2C);
-}
-
-/***************************************************************************/
-
-void __init config_BSP(char *commandp, int size)
-{
-	mach_sched_init = hw_timer_init;
-	m520x_uarts_init();
-	m520x_fec_init();
-#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
-	m520x_qspi_init();
-#endif
-}
-
-/***************************************************************************/
diff --git a/ANDROID_3.4.5/arch/m68k/platform/520x/gpio.c b/ANDROID_3.4.5/arch/m68k/platform/520x/gpio.c
deleted file mode 100644
index 9bcc3e4b..00000000
--- a/ANDROID_3.4.5/arch/m68k/platform/520x/gpio.c
+++ /dev/null
@@ -1,175 +0,0 @@
-/*
- * Coldfire generic GPIO support
- *
- * (C) Copyright 2009, Steven King <sfking@fdwdc.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
-*/
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-#include <asm/coldfire.h>
-#include <asm/mcfsim.h>
-#include <asm/mcfgpio.h>
-
-static struct mcf_gpio_chip mcf_gpio_chips[] = {
-	{
-		.gpio_chip			= {
-			.label			= "PIRQ",
-			.request		= mcf_gpio_request,
-			.free			= mcf_gpio_free,
-			.direction_input	= mcf_gpio_direction_input,
-			.direction_output	= mcf_gpio_direction_output,
-			.get			= mcf_gpio_get_value,
-			.set			= mcf_gpio_set_value,
-			.ngpio			= 8,
-		},
-		.pddr				= (void __iomem *) MCFEPORT_EPDDR,
-		.podr				= (void __iomem *) MCFEPORT_EPDR,
-		.ppdr				= (void __iomem *) MCFEPORT_EPPDR,
-	},
-	{
-		.gpio_chip			= {
-			.label			= "CS",
-			.request		= mcf_gpio_request,
-			.free			= mcf_gpio_free,
-			.direction_input	= mcf_gpio_direction_input,
-			.direction_output	= mcf_gpio_direction_output,
-			.get			= mcf_gpio_get_value,
-			.set			= mcf_gpio_set_value_fast,
-			.base			= 9,
-			.ngpio			= 3,
-		},
-		.pddr				= (void __iomem *) MCFGPIO_PDDR_CS,
-		.podr				= (void __iomem *) MCFGPIO_PODR_CS,
-		.ppdr				= (void __iomem *) MCFGPIO_PPDSDR_CS,
-		.setr				= (void __iomem *) MCFGPIO_PPDSDR_CS,
-		.clrr				= (void __iomem *) MCFGPIO_PCLRR_CS,
-	},
-	{
-		.gpio_chip			= {
-			.label			= "FECI2C",
-			.request		= mcf_gpio_request,
-			.free			= mcf_gpio_free,
-			.direction_input	= mcf_gpio_direction_input,
-			.direction_output	= mcf_gpio_direction_output,
-			.get			= mcf_gpio_get_value,
-			.set			= mcf_gpio_set_value_fast,
-			.base			= 16,
-			.ngpio			= 4,
-		},
-		.pddr				= (void __iomem *) MCFGPIO_PDDR_FECI2C,
-		.podr				= (void __iomem *) MCFGPIO_PODR_FECI2C,
-		.ppdr				= (void __iomem *) MCFGPIO_PPDSDR_FECI2C,
-		.setr				= (void __iomem *) MCFGPIO_PPDSDR_FECI2C,
-		.clrr				= (void __iomem *) MCFGPIO_PCLRR_FECI2C,
-	},
-	{
-		.gpio_chip			= {
-			.label			= "QSPI",
-			.request		= mcf_gpio_request,
-			.free			= mcf_gpio_free,
-			.direction_input	= mcf_gpio_direction_input,
-			.direction_output	= mcf_gpio_direction_output,
-			.get			= mcf_gpio_get_value,
-			.set			= mcf_gpio_set_value_fast,
-			.base			= 24,
-			.ngpio			= 4,
-		},
-		.pddr				= (void __iomem *) MCFGPIO_PDDR_QSPI,
-		.podr				= (void __iomem *) MCFGPIO_PODR_QSPI,
-		.ppdr				= (void __iomem *) MCFGPIO_PPDSDR_QSPI,
-		.setr				= (void __iomem *) MCFGPIO_PPDSDR_QSPI,
-		.clrr				= (void __iomem *) MCFGPIO_PCLRR_QSPI,
-	},
-	{
-		.gpio_chip			= {
-			.label			= "TIMER",
-			.request		= mcf_gpio_request,
-			.free			= mcf_gpio_free,
-			.direction_input	= mcf_gpio_direction_input,
-			.direction_output	= mcf_gpio_direction_output,
-			.get			= mcf_gpio_get_value,
-			.set			= mcf_gpio_set_value_fast,
-			.base			= 32,
-			.ngpio			= 4,
-		},
-		.pddr				= (void __iomem *) MCFGPIO_PDDR_TIMER,
-		.podr				= (void __iomem *) MCFGPIO_PODR_TIMER,
-		.ppdr				= (void __iomem *) MCFGPIO_PPDSDR_TIMER,
-		.setr				= (void __iomem *) MCFGPIO_PPDSDR_TIMER,
-		.clrr				= (void __iomem *) MCFGPIO_PCLRR_TIMER,
-	},
-	{
-		.gpio_chip			= {
-			.label			= "UART",
-			.request		= mcf_gpio_request,
-			.free			= mcf_gpio_free,
-			.direction_input	= mcf_gpio_direction_input,
-			.direction_output	= mcf_gpio_direction_output,
-			.get			= mcf_gpio_get_value,
-			.set			= mcf_gpio_set_value_fast,
-			.base			= 40,
-			.ngpio			= 8,
-		},
-		.pddr				= (void __iomem *) MCFGPIO_PDDR_UART,
-		.podr				= (void __iomem *) MCFGPIO_PODR_UART,
-		.ppdr				= (void __iomem *) MCFGPIO_PPDSDR_UART,
-		.setr				= (void __iomem *) MCFGPIO_PPDSDR_UART,
-		.clrr				= (void __iomem *) MCFGPIO_PCLRR_UART,
-	},
-	{
-		.gpio_chip			= {
-			.label			= "FECH",
-			.request		= mcf_gpio_request,
-			.free			= mcf_gpio_free,
-			.direction_input	= mcf_gpio_direction_input,
-			.direction_output	= mcf_gpio_direction_output,
-			.get			= mcf_gpio_get_value,
-			.set			= mcf_gpio_set_value_fast,
-			.base			= 48,
-			.ngpio			= 8,
-		},
-		.pddr				= (void __iomem *) MCFGPIO_PDDR_FECH,
-		.podr				= (void __iomem *) MCFGPIO_PODR_FECH,
-		.ppdr				= (void __iomem *) MCFGPIO_PPDSDR_FECH,
-		.setr				= (void __iomem *) MCFGPIO_PPDSDR_FECH,
-		.clrr				= (void __iomem *) MCFGPIO_PCLRR_FECH,
-	},
-	{
-		.gpio_chip			= {
-			.label			= "FECL",
-			.request		= mcf_gpio_request,
-			.free			= mcf_gpio_free,
-			.direction_input	= mcf_gpio_direction_input,
-			.direction_output	= mcf_gpio_direction_output,
-			.get			= mcf_gpio_get_value,
-			.set			= mcf_gpio_set_value_fast,
-			.base			= 56,
-			.ngpio			= 8,
-		},
-		.pddr				= (void __iomem *) MCFGPIO_PDDR_FECL,
-		.podr				= (void __iomem *) MCFGPIO_PODR_FECL,
-		.ppdr				= (void __iomem *) MCFGPIO_PPDSDR_FECL,
-		.setr				= (void __iomem *) MCFGPIO_PPDSDR_FECL,
-		.clrr				= (void __iomem *) MCFGPIO_PCLRR_FECL,
-	},
-};
-
-static int __init mcf_gpio_init(void)
-{
-	unsigned i = 0;
-	while (i < ARRAY_SIZE(mcf_gpio_chips))
-		(void)gpiochip_add((struct gpio_chip *)&mcf_gpio_chips[i++]);
-	return 0;
-}
-
-core_initcall(mcf_gpio_init);
diff --git a/ANDROID_3.4.5/arch/m68k/platform/523x/Makefile b/ANDROID_3.4.5/arch/m68k/platform/523x/Makefile
deleted file mode 100644
index c04b8f71..00000000
--- a/ANDROID_3.4.5/arch/m68k/platform/523x/Makefile
+++ /dev/null
@@ -1,17 +0,0 @@
-#
-# Makefile for the m68knommu linux kernel.
-#
-
-#
-# If you want to play with the HW breakpoints then you will
-# need to add define this,  which will give you a stack backtrace
-# on the console port whenever a DBG interrupt occurs.  You have to
-# set up you HW breakpoints to trigger a DBG interrupt:
-#
-# ccflags-y := -DTRAP_DBG_INTERRUPT
-# asflags-y := -DTRAP_DBG_INTERRUPT
-#
-
-asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
-
-obj-y := config.o gpio.o
diff --git a/ANDROID_3.4.5/arch/m68k/platform/523x/config.c b/ANDROID_3.4.5/arch/m68k/platform/523x/config.c
deleted file mode 100644
index d47dfd8f..00000000
--- a/ANDROID_3.4.5/arch/m68k/platform/523x/config.c
+++ /dev/null
@@ -1,66 +0,0 @@
-/***************************************************************************/
-
-/*
- *	linux/arch/m68knommu/platform/523x/config.c
- *
- *	Sub-architcture dependent initialization code for the Freescale
- *	523x CPUs.
- *
- *	Copyright (C) 1999-2005, Greg Ungerer (gerg@snapgear.com)
- *	Copyright (C) 2001-2003, SnapGear Inc. (www.snapgear.com)
- */
-
-/***************************************************************************/
-
-#include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <asm/machdep.h>
-#include <asm/coldfire.h>
-#include <asm/mcfsim.h>
-
-/***************************************************************************/
-
-#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
-
-static void __init m523x_qspi_init(void)
-{
-	u16 par;
-
-	/* setup QSPS pins for QSPI with gpio CS control */
-	writeb(0x1f, MCFGPIO_PAR_QSPI);
-	/* and CS2 & CS3 as gpio */
-	par = readw(MCFGPIO_PAR_TIMER);
-	par &= 0x3f3f;
-	writew(par, MCFGPIO_PAR_TIMER);
-}
-
-#endif /* IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) */
-
-/***************************************************************************/
-
-static void __init m523x_fec_init(void)
-{
-	u16 par;
-	u8 v;
-
-	/* Set multi-function pins to ethernet use */
-	par = readw(MCF_IPSBAR + 0x100082);
-	writew(par | 0xf00, MCF_IPSBAR + 0x100082);
-	v = readb(MCF_IPSBAR + 0x100078);
-	writeb(v | 0xc0, MCF_IPSBAR + 0x100078);
-}
-
-/***************************************************************************/
-
-void __init config_BSP(char *commandp, int size)
-{
-	mach_sched_init = hw_timer_init;
-	m523x_fec_init();
-#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
-	m523x_qspi_init();
-#endif
-}
-
-/***************************************************************************/
diff --git a/ANDROID_3.4.5/arch/m68k/platform/523x/gpio.c b/ANDROID_3.4.5/arch/m68k/platform/523x/gpio.c
deleted file mode 100644
index 327ebf14..00000000
--- a/ANDROID_3.4.5/arch/m68k/platform/523x/gpio.c
+++ /dev/null
@@ -1,284 +0,0 @@
-/*
- * Coldfire generic GPIO support
- *
- * (C) Copyright 2009, Steven King <sfking@fdwdc.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
-*/
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-#include <asm/coldfire.h>
-#include <asm/mcfsim.h>
-#include <asm/mcfgpio.h>
-
-static struct mcf_gpio_chip mcf_gpio_chips[] = {
-	{
-		.gpio_chip			= {
-			.label			= "PIRQ",
-			.request		= mcf_gpio_request,
-			.free			= mcf_gpio_free,
-			.direction_input	= mcf_gpio_direction_input,
-			.direction_output	= mcf_gpio_direction_output,
-			.get			= mcf_gpio_get_value,
-			.set			= mcf_gpio_set_value,
-			.base			= 1,
-			.ngpio			= 7,
-		},
-		.pddr				= (void __iomem *) MCFEPORT_EPDDR,
-		.podr				= (void __iomem *) MCFEPORT_EPDR,
-		.ppdr				= (void __iomem *) MCFEPORT_EPPDR,
-	},
-	{
-		.gpio_chip			= {
-			.label			= "ADDR",
-			.request		= mcf_gpio_request,
-			.free			= mcf_gpio_free,
-			.direction_input	= mcf_gpio_direction_input,
-			.direction_output	= mcf_gpio_direction_output,
-			.get			= mcf_gpio_get_value,
-			.set			= mcf_gpio_set_value_fast,
-			.base			= 13,
-			.ngpio			= 3,
-		},
-		.pddr				= (void __iomem *) MCFGPIO_PDDR_ADDR,
-		.podr				= (void __iomem *) MCFGPIO_PODR_ADDR,
-		.ppdr				= (void __iomem *) MCFGPIO_PPDSDR_ADDR,
-		.setr				= (void __iomem *) MCFGPIO_PPDSDR_ADDR,
-		.clrr				= (void __iomem *) MCFGPIO_PCLRR_ADDR,
-	},
-	{
-		.gpio_chip			= {
-			.label			= "DATAH",
-			.request		= mcf_gpio_request,
-			.free			= mcf_gpio_free,
-			.direction_input	= mcf_gpio_direction_input,
-			.direction_output	= mcf_gpio_direction_output,
-			.get			= mcf_gpio_get_value,
-			.set			= mcf_gpio_set_value_fast,
-			.base			= 16,
-			.ngpio			= 8,
-		},
-		.pddr				= (void __iomem *) MCFGPIO_PDDR_DATAH,
-		.podr				= (void __iomem *) MCFGPIO_PODR_DATAH,
-		.ppdr				= (void __iomem *) MCFGPIO_PPDSDR_DATAH,
-		.setr				= (void __iomem *) MCFGPIO_PPDSDR_DATAH,
-		.clrr				= (void __iomem *) MCFGPIO_PCLRR_DATAH,
-	},
-	{
-		.gpio_chip			= {
-			.label			= "DATAL",
-			.request		= mcf_gpio_request,
-			.free			= mcf_gpio_free,
-			.direction_input	= mcf_gpio_direction_input,
-			.direction_output	= mcf_gpio_direction_output,
-			.get			= mcf_gpio_get_value,
-			.set			= mcf_gpio_set_value_fast,
-			.base			= 24,
-			.ngpio			= 8,
-		},
-		.pddr				= (void __iomem *) MCFGPIO_PDDR_DATAL,
-		.podr				= (void __iomem *) MCFGPIO_PODR_DATAL,
-		.ppdr				= (void __iomem *) MCFGPIO_PPDSDR_DATAL,
-		.setr				= (void __iomem *) MCFGPIO_PPDSDR_DATAL,
-		.clrr				= (void __iomem *) MCFGPIO_PCLRR_DATAL,
-	},
-	{
-		.gpio_chip			= {
-			.label			= "BUSCTL",
-			.request		= mcf_gpio_request,
-			.free			= mcf_gpio_free,
-			.direction_input	= mcf_gpio_direction_input,
-			.direction_output	= mcf_gpio_direction_output,
-			.get			= mcf_gpio_get_value,
-			.set			= mcf_gpio_set_value_fast,
-			.base			= 32,
-			.ngpio			= 8,
-		},
-		.pddr				= (void __iomem *) MCFGPIO_PDDR_BUSCTL,
-		.podr				= (void __iomem *) MCFGPIO_PODR_BUSCTL,
-		.ppdr				= (void __iomem *) MCFGPIO_PPDSDR_BUSCTL,
-		.setr				= (void __iomem *) MCFGPIO_PPDSDR_BUSCTL,
-		.clrr				= (void __iomem *) MCFGPIO_PCLRR_BUSCTL,
-	},
-	{
-		.gpio_chip			= {
-			.label			= "BS",
-			.request		= mcf_gpio_request,
-			.free			= mcf_gpio_free,
-			.direction_input	= mcf_gpio_direction_input,
-			.direction_output	= mcf_gpio_direction_output,
-			.get			= mcf_gpio_get_value,
-			.set			= mcf_gpio_set_value_fast,
-			.base			= 40,
-			.ngpio			= 4,
-		},
-		.pddr				= (void __iomem *) MCFGPIO_PDDR_BS,
-		.podr				= (void __iomem *) MCFGPIO_PODR_BS,
-		.ppdr				= (void __iomem *) MCFGPIO_PPDSDR_BS,
-		.setr				= (void __iomem *) MCFGPIO_PPDSDR_BS,
-		.clrr				= (void __iomem *) MCFGPIO_PCLRR_BS,
-	},
-	{
-		.gpio_chip			= {
-			.label			= "CS",
-			.request		= mcf_gpio_request,
-			.free			= mcf_gpio_free,
-			.direction_input	= mcf_gpio_direction_input,
-			.direction_output	= mcf_gpio_direction_output,
-			.get			= mcf_gpio_get_value,
-			.set			= mcf_gpio_set_value_fast,
-			.base			= 49,
-			.ngpio			= 7,
-		},
-		.pddr				= (void __iomem *) MCFGPIO_PDDR_CS,
-		.podr				= (void __iomem *) MCFGPIO_PODR_CS,
-		.ppdr				= (void __iomem *) MCFGPIO_PPDSDR_CS,
-		.setr				= (void __iomem *) MCFGPIO_PPDSDR_CS,
-		.clrr				= (void __iomem *) MCFGPIO_PCLRR_CS,
-	},
-	{
-		.gpio_chip			= {
-			.label			= "SDRAM",
-			.request		= mcf_gpio_request,
-			.free			= mcf_gpio_free,
-			.direction_input	= mcf_gpio_direction_input,
-			.direction_output	= mcf_gpio_direction_output,
-			.get			= mcf_gpio_get_value,
-			.set			= mcf_gpio_set_value_fast,
-			.base			= 56,
-			.ngpio			= 6,
-		},
-		.pddr				= (void __iomem *) MCFGPIO_PDDR_SDRAM,
-		.podr				= (void __iomem *) MCFGPIO_PODR_SDRAM,
-		.ppdr				= (void __iomem *) MCFGPIO_PPDSDR_SDRAM,
-		.setr				= (void __iomem *) MCFGPIO_PPDSDR_SDRAM,
-		.clrr				= (void __iomem *) MCFGPIO_PCLRR_SDRAM,
-	},
-	{
-		.gpio_chip			= {
-			.label			= "FECI2C",
-			.request		= mcf_gpio_request,
-			.free			= mcf_gpio_free,
-			.direction_input	= mcf_gpio_direction_input,
-			.direction_output	= mcf_gpio_direction_output,
-			.get			= mcf_gpio_get_value,
-			.set			= mcf_gpio_set_value_fast,
-			.base			= 64,
-			.ngpio			= 4,
-		},
-		.pddr				= (void __iomem *) MCFGPIO_PDDR_FECI2C,
-		.podr				= (void __iomem *) MCFGPIO_PODR_FECI2C,
-		.ppdr				= (void __iomem *) MCFGPIO_PPDSDR_FECI2C,
-		.setr				= (void __iomem *) MCFGPIO_PPDSDR_FECI2C,
-		.clrr				= (void __iomem *) MCFGPIO_PCLRR_FECI2C,
-	},
-	{
-		.gpio_chip			= {
-			.label			= "UARTH",
-			.request		= mcf_gpio_request,
-			.free			= mcf_gpio_free,
-			.direction_input	= mcf_gpio_direction_input,
-			.direction_output	= mcf_gpio_direction_output,
-			.get			= mcf_gpio_get_value,
-			.set			= mcf_gpio_set_value_fast,
-			.base			= 72,
-			.ngpio			= 2,
-		},
-		.pddr				= (void __iomem *) MCFGPIO_PDDR_UARTH,
-		.podr				= (void __iomem *) MCFGPIO_PODR_UARTH,
-		.ppdr				= (void __iomem *) MCFGPIO_PPDSDR_UARTH,
-		.setr				= (void __iomem *) MCFGPIO_PPDSDR_UARTH,
-		.clrr				= (void __iomem *) MCFGPIO_PCLRR_UARTH,
-	},
-	{
-		.gpio_chip			= {
-			.label			= "UARTL",
-			.request		= mcf_gpio_request,
-			.free			= mcf_gpio_free,
-			.direction_input	= mcf_gpio_direction_input,
-			.direction_output	= mcf_gpio_direction_output,
-			.get			= mcf_gpio_get_value,
-			.set			= mcf_gpio_set_value_fast,
-			.base			= 80,
-			.ngpio			= 8,
-		},
-		.pddr				= (void __iomem *) MCFGPIO_PDDR_UARTL,
-		.podr				= (void __iomem *) MCFGPIO_PODR_UARTL,
-		.ppdr				= (void __iomem *) MCFGPIO_PPDSDR_UARTL,
-		.setr				= (void __iomem *) MCFGPIO_PPDSDR_UARTL,
-		.clrr				= (void __iomem *) MCFGPIO_PCLRR_UARTL,
-	},
-	{
-		.gpio_chip			= {
-			.label			= "QSPI",
-			.request		= mcf_gpio_request,
-			.free			= mcf_gpio_free,
-			.direction_input	= mcf_gpio_direction_input,
-			.direction_output	= mcf_gpio_direction_output,
-			.get			= mcf_gpio_get_value,
-			.set			= mcf_gpio_set_value_fast,
-			.base			= 88,
-			.ngpio			= 5,
-		},
-		.pddr				= (void __iomem *) MCFGPIO_PDDR_QSPI,
-		.podr				= (void __iomem *) MCFGPIO_PODR_QSPI,
-		.ppdr				= (void __iomem *) MCFGPIO_PPDSDR_QSPI,
-		.setr				= (void __iomem *) MCFGPIO_PPDSDR_QSPI,
-		.clrr				= (void __iomem *) MCFGPIO_PCLRR_QSPI,
-	},
-	{
-		.gpio_chip			= {
-			.label			= "TIMER",
-			.request		= mcf_gpio_request,
-			.free			= mcf_gpio_free,
-			.direction_input	= mcf_gpio_direction_input,
-			.direction_output	= mcf_gpio_direction_output,
-			.get			= mcf_gpio_get_value,
-			.set			= mcf_gpio_set_value_fast,
-			.base			= 96,
-			.ngpio			= 8,
-		},
-		.pddr				= (void __iomem *) MCFGPIO_PDDR_TIMER,
-		.podr				= (void __iomem *) MCFGPIO_PODR_TIMER,
-		.ppdr				= (void __iomem *) MCFGPIO_PPDSDR_TIMER,
-		.setr				= (void __iomem *) MCFGPIO_PPDSDR_TIMER,
-		.clrr				= (void __iomem *) MCFGPIO_PCLRR_TIMER,
-	},
-	{
-		.gpio_chip			= {
-			.label			= "ETPU",
-			.request		= mcf_gpio_request,
-			.free			= mcf_gpio_free,
-			.direction_input	= mcf_gpio_direction_input,
-			.direction_output	= mcf_gpio_direction_output,
-			.get			= mcf_gpio_get_value,
-			.set			= mcf_gpio_set_value_fast,
-			.base			= 104,
-			.ngpio			= 3,
-		},
-		.pddr				= (void __iomem *) MCFGPIO_PDDR_ETPU,
-		.podr				= (void __iomem *) MCFGPIO_PODR_ETPU,
-		.ppdr				= (void __iomem *) MCFGPIO_PPDSDR_ETPU,
-		.setr				= (void __iomem *) MCFGPIO_PPDSDR_ETPU,
-		.clrr				= (void __iomem *) MCFGPIO_PCLRR_ETPU,
-	},
-};
-
-static int __init mcf_gpio_init(void)
-{
-	unsigned i = 0;
-	while (i < ARRAY_SIZE(mcf_gpio_chips))
-		(void)gpiochip_add((struct gpio_chip *)&mcf_gpio_chips[i++]);
-	return 0;
-}
-
-core_initcall(mcf_gpio_init);
diff --git a/ANDROID_3.4.5/arch/m68k/platform/5249/Makefile b/ANDROID_3.4.5/arch/m68k/platform/5249/Makefile
deleted file mode 100644
index 4bed30fd..00000000
--- a/ANDROID_3.4.5/arch/m68k/platform/5249/Makefile
+++ /dev/null
@@ -1,18 +0,0 @@
-#
-# Makefile for the m68knommu linux kernel.
-#
-
-#
-# If you want to play with the HW breakpoints then you will
-# need to add define this,  which will give you a stack backtrace
-# on the console port whenever a DBG interrupt occurs.  You have to
-# set up you HW breakpoints to trigger a DBG interrupt:
-#
-# ccflags-y := -DTRAP_DBG_INTERRUPT
-# asflags-y := -DTRAP_DBG_INTERRUPT
-#
-
-asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
-
-obj-y := config.o gpio.o intc2.o
-
diff --git a/ANDROID_3.4.5/arch/m68k/platform/5249/config.c b/ANDROID_3.4.5/arch/m68k/platform/5249/config.c
deleted file mode 100644
index 300e729a..00000000
--- a/ANDROID_3.4.5/arch/m68k/platform/5249/config.c
+++ /dev/null
@@ -1,108 +0,0 @@
-/***************************************************************************/
-
-/*
- *	linux/arch/m68knommu/platform/5249/config.c
- *
- *	Copyright (C) 2002, Greg Ungerer (gerg@snapgear.com)
- */
-
-/***************************************************************************/
-
-#include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/platform_device.h>
-#include <asm/machdep.h>
-#include <asm/coldfire.h>
-#include <asm/mcfsim.h>
-
-/***************************************************************************/
-
-#ifdef CONFIG_M5249C3
-
-static struct resource m5249_smc91x_resources[] = {
-	{
-		.start		= 0xe0000300,
-		.end		= 0xe0000300 + 0x100,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= MCFINTC2_GPIOIRQ6,
-		.end		= MCFINTC2_GPIOIRQ6,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device m5249_smc91x = {
-	.name			= "smc91x",
-	.id			= 0,
-	.num_resources		= ARRAY_SIZE(m5249_smc91x_resources),
-	.resource		= m5249_smc91x_resources,
-};
-
-#endif /* CONFIG_M5249C3 */
-
-static struct platform_device *m5249_devices[] __initdata = {
-#ifdef CONFIG_M5249C3
-	&m5249_smc91x,
-#endif
-};
-
-/***************************************************************************/
-
-#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
-
-static void __init m5249_qspi_init(void)
-{
-	/* QSPI irq setup */
-	writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL4 | MCFSIM_ICR_PRI0,
-	       MCF_MBAR + MCFSIM_QSPIICR);
-	mcf_mapirq2imr(MCF_IRQ_QSPI, MCFINTC_QSPI);
-}
-
-#endif /* IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) */
-
-/***************************************************************************/
-
-#ifdef CONFIG_M5249C3
-
-static void __init m5249_smc91x_init(void)
-{
-	u32  gpio;
-
-	/* Set the GPIO line as interrupt source for smc91x device */
-	gpio = readl(MCF_MBAR2 + MCFSIM2_GPIOINTENABLE);
-	writel(gpio | 0x40, MCF_MBAR2 + MCFSIM2_GPIOINTENABLE);
-
-	gpio = readl(MCF_MBAR2 + MCFSIM2_INTLEVEL5);
-	writel(gpio | 0x04000000, MCF_MBAR2 + MCFSIM2_INTLEVEL5);
-}
-
-#endif /* CONFIG_M5249C3 */
-
-/***************************************************************************/
-
-void __init config_BSP(char *commandp, int size)
-{
-	mach_sched_init = hw_timer_init;
-
-#ifdef CONFIG_M5249C3
-	m5249_smc91x_init();
-#endif
-#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
-	m5249_qspi_init();
-#endif
-}
-
-/***************************************************************************/
-
-static int __init init_BSP(void)
-{
-	platform_add_devices(m5249_devices, ARRAY_SIZE(m5249_devices));
-	return 0;
-}
-
-arch_initcall(init_BSP);
-
-/***************************************************************************/
diff --git a/ANDROID_3.4.5/arch/m68k/platform/5249/gpio.c b/ANDROID_3.4.5/arch/m68k/platform/5249/gpio.c
deleted file mode 100644
index 2b56c6ef..00000000
--- a/ANDROID_3.4.5/arch/m68k/platform/5249/gpio.c
+++ /dev/null
@@ -1,65 +0,0 @@
-/*
- * Coldfire generic GPIO support
- *
- * (C) Copyright 2009, Steven King <sfking@fdwdc.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
-*/
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-#include <asm/coldfire.h>
-#include <asm/mcfsim.h>
-#include <asm/mcfgpio.h>
-
-static struct mcf_gpio_chip mcf_gpio_chips[] = {
-	{
-		.gpio_chip			= {
-			.label			= "GPIO0",
-			.request		= mcf_gpio_request,
-			.free			= mcf_gpio_free,
-			.direction_input	= mcf_gpio_direction_input,
-			.direction_output	= mcf_gpio_direction_output,
-			.get			= mcf_gpio_get_value,
-			.set			= mcf_gpio_set_value,
-			.ngpio			= 32,
-		},
-		.pddr				= (void __iomem *) MCFSIM2_GPIOENABLE,
-		.podr				= (void __iomem *) MCFSIM2_GPIOWRITE,
-		.ppdr				= (void __iomem *) MCFSIM2_GPIOREAD,
-	},
-	{
-		.gpio_chip			= {
-			.label			= "GPIO1",
-			.request		= mcf_gpio_request,
-			.free			= mcf_gpio_free,
-			.direction_input	= mcf_gpio_direction_input,
-			.direction_output	= mcf_gpio_direction_output,
-			.get			= mcf_gpio_get_value,
-			.set			= mcf_gpio_set_value,
-			.base			= 32,
-			.ngpio			= 32,
-		},
-		.pddr				= (void __iomem *) MCFSIM2_GPIO1ENABLE,
-		.podr				= (void __iomem *) MCFSIM2_GPIO1WRITE,
-		.ppdr				= (void __iomem *) MCFSIM2_GPIO1READ,
-	},
-};
-
-static int __init mcf_gpio_init(void)
-{
-	unsigned i = 0;
-	while (i < ARRAY_SIZE(mcf_gpio_chips))
-		(void)gpiochip_add((struct gpio_chip *)&mcf_gpio_chips[i++]);
-	return 0;
-}
-
-core_initcall(mcf_gpio_init);
diff --git a/ANDROID_3.4.5/arch/m68k/platform/5249/intc2.c b/ANDROID_3.4.5/arch/m68k/platform/5249/intc2.c
deleted file mode 100644
index f343bf7b..00000000
--- a/ANDROID_3.4.5/arch/m68k/platform/5249/intc2.c
+++ /dev/null
@@ -1,61 +0,0 @@
-/*
- * intc2.c  -- support for the 2nd INTC controller of the 5249
- *
- * (C) Copyright 2009, Greg Ungerer <gerg@snapgear.com>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file COPYING in the main directory of this archive
- * for more details.
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <asm/coldfire.h>
-#include <asm/mcfsim.h>
-
-static void intc2_irq_gpio_mask(struct irq_data *d)
-{
-	u32 imr;
-	imr = readl(MCF_MBAR2 + MCFSIM2_GPIOINTENABLE);
-	imr &= ~(0x1 << (d->irq - MCFINTC2_GPIOIRQ0));
-	writel(imr, MCF_MBAR2 + MCFSIM2_GPIOINTENABLE);
-}
-
-static void intc2_irq_gpio_unmask(struct irq_data *d)
-{
-	u32 imr;
-	imr = readl(MCF_MBAR2 + MCFSIM2_GPIOINTENABLE);
-	imr |= (0x1 << (d->irq - MCFINTC2_GPIOIRQ0));
-	writel(imr, MCF_MBAR2 + MCFSIM2_GPIOINTENABLE);
-}
-
-static void intc2_irq_gpio_ack(struct irq_data *d)
-{
-	writel(0x1 << (d->irq - MCFINTC2_GPIOIRQ0), MCF_MBAR2 + MCFSIM2_GPIOINTCLEAR);
-}
-
-static struct irq_chip intc2_irq_gpio_chip = {
-	.name		= "CF-INTC2",
-	.irq_mask	= intc2_irq_gpio_mask,
-	.irq_unmask	= intc2_irq_gpio_unmask,
-	.irq_ack	= intc2_irq_gpio_ack,
-};
-
-static int __init mcf_intc2_init(void)
-{
-	int irq;
-
-	/* GPIO interrupt sources */
-	for (irq = MCFINTC2_GPIOIRQ0; (irq <= MCFINTC2_GPIOIRQ7); irq++) {
-		irq_set_chip(irq, &intc2_irq_gpio_chip);
-		irq_set_handler(irq, handle_edge_irq);
-	}
-
-	return 0;
-}
-
-arch_initcall(mcf_intc2_init);
diff --git a/ANDROID_3.4.5/arch/m68k/platform/5272/Makefile b/ANDROID_3.4.5/arch/m68k/platform/5272/Makefile
deleted file mode 100644
index 34110fc1..00000000
--- a/ANDROID_3.4.5/arch/m68k/platform/5272/Makefile
+++ /dev/null
@@ -1,18 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-#
-# If you want to play with the HW breakpoints then you will
-# need to add define this,  which will give you a stack backtrace
-# on the console port whenever a DBG interrupt occurs.  You have to
-# set up you HW breakpoints to trigger a DBG interrupt:
-#
-# ccflags-y := -DTRAP_DBG_INTERRUPT
-# asflags-y := -DTRAP_DBG_INTERRUPT
-#
-
-asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
-
-obj-y := config.o gpio.o intc.o
-
diff --git a/ANDROID_3.4.5/arch/m68k/platform/5272/config.c b/ANDROID_3.4.5/arch/m68k/platform/5272/config.c
deleted file mode 100644
index e68bc7a1..00000000
--- a/ANDROID_3.4.5/arch/m68k/platform/5272/config.c
+++ /dev/null
@@ -1,110 +0,0 @@
-/***************************************************************************/
-
-/*
- *	linux/arch/m68knommu/platform/5272/config.c
- *
- *	Copyright (C) 1999-2002, Greg Ungerer (gerg@snapgear.com)
- *	Copyright (C) 2001-2002, SnapGear Inc. (www.snapgear.com)
- */
-
-/***************************************************************************/
-
-#include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/phy.h>
-#include <linux/phy_fixed.h>
-#include <asm/machdep.h>
-#include <asm/coldfire.h>
-#include <asm/mcfsim.h>
-#include <asm/mcfuart.h>
-
-/***************************************************************************/
-
-/*
- *	Some platforms need software versions of the GPIO data registers.
- */
-unsigned short ppdata;
-unsigned char ledbank = 0xff;
-
-/***************************************************************************/
-
-static void __init m5272_uarts_init(void)
-{
-	u32 v;
-
-	/* Enable the output lines for the serial ports */
-	v = readl(MCF_MBAR + MCFSIM_PBCNT);
-	v = (v & ~0x000000ff) | 0x00000055;
-	writel(v, MCF_MBAR + MCFSIM_PBCNT);
-
-	v = readl(MCF_MBAR + MCFSIM_PDCNT);
-	v = (v & ~0x000003fc) | 0x000002a8;
-	writel(v, MCF_MBAR + MCFSIM_PDCNT);
-}
-
-/***************************************************************************/
-
-static void m5272_cpu_reset(void)
-{
-	local_irq_disable();
-	/* Set watchdog to reset, and enabled */
-	__raw_writew(0, MCF_MBAR + MCFSIM_WIRR);
-	__raw_writew(1, MCF_MBAR + MCFSIM_WRRR);
-	__raw_writew(0, MCF_MBAR + MCFSIM_WCR);
-	for (;;)
-		/* wait for watchdog to timeout */;
-}
-
-/***************************************************************************/
-
-void __init config_BSP(char *commandp, int size)
-{
-#if defined (CONFIG_MOD5272)
-	volatile unsigned char	*pivrp;
-
-	/* Set base of device vectors to be 64 */
-	pivrp = (volatile unsigned char *) (MCF_MBAR + MCFSIM_PIVR);
-	*pivrp = 0x40;
-#endif
-
-#if defined(CONFIG_NETtel) || defined(CONFIG_SCALES)
-	/* Copy command line from FLASH to local buffer... */
-	memcpy(commandp, (char *) 0xf0004000, size);
-	commandp[size-1] = 0;
-#elif defined(CONFIG_CANCam)
-	/* Copy command line from FLASH to local buffer... */
-	memcpy(commandp, (char *) 0xf0010000, size);
-	commandp[size-1] = 0;
-#endif
-
-	mach_reset = m5272_cpu_reset;
-	mach_sched_init = hw_timer_init;
-}
-
-/***************************************************************************/
-
-/*
- * Some 5272 based boards have the FEC ethernet diectly connected to
- * an ethernet switch. In this case we need to use the fixed phy type,
- * and we need to declare it early in boot.
- */
-static struct fixed_phy_status nettel_fixed_phy_status __initdata = {
-	.link	= 1,
-	.speed	= 100,
-	.duplex	= 0,
-};
-
-/***************************************************************************/
-
-static int __init init_BSP(void)
-{
-	m5272_uarts_init();
-	fixed_phy_add(PHY_POLL, 0, &nettel_fixed_phy_status);
-	return 0;
-}
-
-arch_initcall(init_BSP);
-
-/***************************************************************************/
diff --git a/ANDROID_3.4.5/arch/m68k/platform/5272/gpio.c b/ANDROID_3.4.5/arch/m68k/platform/5272/gpio.c
deleted file mode 100644
index 57ac10a5..00000000
--- a/ANDROID_3.4.5/arch/m68k/platform/5272/gpio.c
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- * Coldfire generic GPIO support
- *
- * (C) Copyright 2009, Steven King <sfking@fdwdc.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
-*/
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-#include <asm/coldfire.h>
-#include <asm/mcfsim.h>
-#include <asm/mcfgpio.h>
-
-static struct mcf_gpio_chip mcf_gpio_chips[] = {
-	{
-		.gpio_chip			= {
-			.label			= "PA",
-			.request		= mcf_gpio_request,
-			.free			= mcf_gpio_free,
-			.direction_input	= mcf_gpio_direction_input,
-			.direction_output	= mcf_gpio_direction_output,
-			.get			= mcf_gpio_get_value,
-			.set			= mcf_gpio_set_value,
-			.ngpio			= 16,
-		},
-		.pddr				= (void __iomem *) MCFSIM_PADDR,
-		.podr				= (void __iomem *) MCFSIM_PADAT,
-		.ppdr				= (void __iomem *) MCFSIM_PADAT,
-	},
-	{
-		.gpio_chip			= {
-			.label			= "PB",
-			.request		= mcf_gpio_request,
-			.free			= mcf_gpio_free,
-			.direction_input	= mcf_gpio_direction_input,
-			.direction_output	= mcf_gpio_direction_output,
-			.get			= mcf_gpio_get_value,
-			.set			= mcf_gpio_set_value,
-			.base			= 16,
-			.ngpio			= 16,
-		},
-		.pddr				= (void __iomem *) MCFSIM_PBDDR,
-		.podr				= (void __iomem *) MCFSIM_PBDAT,
-		.ppdr				= (void __iomem *) MCFSIM_PBDAT,
-	},
-	{
-		.gpio_chip			= {
-			.label			= "PC",
-			.request		= mcf_gpio_request,
-			.free			= mcf_gpio_free,
-			.direction_input	= mcf_gpio_direction_input,
-			.direction_output	= mcf_gpio_direction_output,
-			.get			= mcf_gpio_get_value,
-			.set			= mcf_gpio_set_value,
-			.base			= 32,
-			.ngpio			= 16,
-		},
-		.pddr				= (void __iomem *) MCFSIM_PCDDR,
-		.podr				= (void __iomem *) MCFSIM_PCDAT,
-		.ppdr				= (void __iomem *) MCFSIM_PCDAT,
-	},
-};
-
-static int __init mcf_gpio_init(void)
-{
-	unsigned i = 0;
-	while (i < ARRAY_SIZE(mcf_gpio_chips))
-		(void)gpiochip_add((struct gpio_chip *)&mcf_gpio_chips[i++]);
-	return 0;
-}
-
-core_initcall(mcf_gpio_init);
diff --git a/ANDROID_3.4.5/arch/m68k/platform/5272/intc.c b/ANDROID_3.4.5/arch/m68k/platform/5272/intc.c
deleted file mode 100644
index 7160e618..00000000
--- a/ANDROID_3.4.5/arch/m68k/platform/5272/intc.c
+++ /dev/null
@@ -1,185 +0,0 @@
-/*
- * intc.c  --  interrupt controller or ColdFire 5272 SoC
- *
- * (C) Copyright 2009, Greg Ungerer <gerg@snapgear.com>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file COPYING in the main directory of this archive
- * for more details.
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/kernel_stat.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <asm/coldfire.h>
-#include <asm/mcfsim.h>
-#include <asm/traps.h>
-
-/*
- * The 5272 ColdFire interrupt controller is nothing like any other
- * ColdFire interrupt controller - it truly is completely different.
- * Given its age it is unlikely to be used on any other ColdFire CPU.
- */
-
-/*
- * The masking and priproty setting of interrupts on the 5272 is done
- * via a set of 4 "Interrupt Controller Registers" (ICR). There is a
- * loose mapping of vector number to register and internal bits, but
- * a table is the easiest and quickest way to map them.
- *
- * Note that the external interrupts are edge triggered (unlike the
- * internal interrupt sources which are level triggered). Which means
- * they also need acknowledging via acknowledge bits.
- */
-struct irqmap {
-	unsigned char	icr;
-	unsigned char	index;
-	unsigned char	ack;
-};
-
-static struct irqmap intc_irqmap[MCFINT_VECMAX - MCFINT_VECBASE] = {
-	/*MCF_IRQ_SPURIOUS*/	{ .icr = 0,           .index = 0,  .ack = 0, },
-	/*MCF_IRQ_EINT1*/	{ .icr = MCFSIM_ICR1, .index = 28, .ack = 1, },
-	/*MCF_IRQ_EINT2*/	{ .icr = MCFSIM_ICR1, .index = 24, .ack = 1, },
-	/*MCF_IRQ_EINT3*/	{ .icr = MCFSIM_ICR1, .index = 20, .ack = 1, },
-	/*MCF_IRQ_EINT4*/	{ .icr = MCFSIM_ICR1, .index = 16, .ack = 1, },
-	/*MCF_IRQ_TIMER1*/	{ .icr = MCFSIM_ICR1, .index = 12, .ack = 0, },
-	/*MCF_IRQ_TIMER2*/	{ .icr = MCFSIM_ICR1, .index = 8,  .ack = 0, },
-	/*MCF_IRQ_TIMER3*/	{ .icr = MCFSIM_ICR1, .index = 4,  .ack = 0, },
-	/*MCF_IRQ_TIMER4*/	{ .icr = MCFSIM_ICR1, .index = 0,  .ack = 0, },
-	/*MCF_IRQ_UART1*/	{ .icr = MCFSIM_ICR2, .index = 28, .ack = 0, },
-	/*MCF_IRQ_UART2*/	{ .icr = MCFSIM_ICR2, .index = 24, .ack = 0, },
-	/*MCF_IRQ_PLIP*/	{ .icr = MCFSIM_ICR2, .index = 20, .ack = 0, },
-	/*MCF_IRQ_PLIA*/	{ .icr = MCFSIM_ICR2, .index = 16, .ack = 0, },
-	/*MCF_IRQ_USB0*/	{ .icr = MCFSIM_ICR2, .index = 12, .ack = 0, },
-	/*MCF_IRQ_USB1*/	{ .icr = MCFSIM_ICR2, .index = 8,  .ack = 0, },
-	/*MCF_IRQ_USB2*/	{ .icr = MCFSIM_ICR2, .index = 4,  .ack = 0, },
-	/*MCF_IRQ_USB3*/	{ .icr = MCFSIM_ICR2, .index = 0,  .ack = 0, },
-	/*MCF_IRQ_USB4*/	{ .icr = MCFSIM_ICR3, .index = 28, .ack = 0, },
-	/*MCF_IRQ_USB5*/	{ .icr = MCFSIM_ICR3, .index = 24, .ack = 0, },
-	/*MCF_IRQ_USB6*/	{ .icr = MCFSIM_ICR3, .index = 20, .ack = 0, },
-	/*MCF_IRQ_USB7*/	{ .icr = MCFSIM_ICR3, .index = 16, .ack = 0, },
-	/*MCF_IRQ_DMA*/		{ .icr = MCFSIM_ICR3, .index = 12, .ack = 0, },
-	/*MCF_IRQ_ERX*/		{ .icr = MCFSIM_ICR3, .index = 8,  .ack = 0, },
-	/*MCF_IRQ_ETX*/		{ .icr = MCFSIM_ICR3, .index = 4,  .ack = 0, },
-	/*MCF_IRQ_ENTC*/	{ .icr = MCFSIM_ICR3, .index = 0,  .ack = 0, },
-	/*MCF_IRQ_QSPI*/	{ .icr = MCFSIM_ICR4, .index = 28, .ack = 0, },
-	/*MCF_IRQ_EINT5*/	{ .icr = MCFSIM_ICR4, .index = 24, .ack = 1, },
-	/*MCF_IRQ_EINT6*/	{ .icr = MCFSIM_ICR4, .index = 20, .ack = 1, },
-	/*MCF_IRQ_SWTO*/	{ .icr = MCFSIM_ICR4, .index = 16, .ack = 0, },
-};
-
-/*
- * The act of masking the interrupt also has a side effect of 'ack'ing
- * an interrupt on this irq (for the external irqs). So this mask function
- * is also an ack_mask function.
- */
-static void intc_irq_mask(struct irq_data *d)
-{
-	unsigned int irq = d->irq;
-
-	if ((irq >= MCFINT_VECBASE) && (irq <= MCFINT_VECMAX)) {
-		u32 v;
-		irq -= MCFINT_VECBASE;
-		v = 0x8 << intc_irqmap[irq].index;
-		writel(v, MCF_MBAR + intc_irqmap[irq].icr);
-	}
-}
-
-static void intc_irq_unmask(struct irq_data *d)
-{
-	unsigned int irq = d->irq;
-
-	if ((irq >= MCFINT_VECBASE) && (irq <= MCFINT_VECMAX)) {
-		u32 v;
-		irq -= MCFINT_VECBASE;
-		v = 0xd << intc_irqmap[irq].index;
-		writel(v, MCF_MBAR + intc_irqmap[irq].icr);
-	}
-}
-
-static void intc_irq_ack(struct irq_data *d)
-{
-	unsigned int irq = d->irq;
-
-	/* Only external interrupts are acked */
-	if ((irq >= MCFINT_VECBASE) && (irq <= MCFINT_VECMAX)) {
-		irq -= MCFINT_VECBASE;
-		if (intc_irqmap[irq].ack) {
-			u32 v;
-			v = readl(MCF_MBAR + intc_irqmap[irq].icr);
-			v &= (0x7 << intc_irqmap[irq].index);
-			v |= (0x8 << intc_irqmap[irq].index);
-			writel(v, MCF_MBAR + intc_irqmap[irq].icr);
-		}
-	}
-}
-
-static int intc_irq_set_type(struct irq_data *d, unsigned int type)
-{
-	unsigned int irq = d->irq;
-
-	if ((irq >= MCFINT_VECBASE) && (irq <= MCFINT_VECMAX)) {
-		irq -= MCFINT_VECBASE;
-		if (intc_irqmap[irq].ack) {
-			u32 v;
-			v = readl(MCF_MBAR + MCFSIM_PITR);
-			if (type == IRQ_TYPE_EDGE_FALLING)
-				v &= ~(0x1 << (32 - irq));
-			else
-				v |= (0x1 << (32 - irq));
-			writel(v, MCF_MBAR + MCFSIM_PITR);
-		}
-	}
-	return 0;
-}
-
-/*
- * Simple flow handler to deal with the external edge triggered interrupts.
- * We need to be careful with the masking/acking due to the side effects
- * of masking an interrupt.
- */
-static void intc_external_irq(unsigned int irq, struct irq_desc *desc)
-{
-	irq_desc_get_chip(desc)->irq_ack(&desc->irq_data);
-	handle_simple_irq(irq, desc);
-}
-
-static struct irq_chip intc_irq_chip = {
-	.name		= "CF-INTC",
-	.irq_mask	= intc_irq_mask,
-	.irq_unmask	= intc_irq_unmask,
-	.irq_mask_ack	= intc_irq_mask,
-	.irq_ack	= intc_irq_ack,
-	.irq_set_type	= intc_irq_set_type,
-};
-
-void __init init_IRQ(void)
-{
-	int irq, edge;
-
-	/* Mask all interrupt sources */
-	writel(0x88888888, MCF_MBAR + MCFSIM_ICR1);
-	writel(0x88888888, MCF_MBAR + MCFSIM_ICR2);
-	writel(0x88888888, MCF_MBAR + MCFSIM_ICR3);
-	writel(0x88888888, MCF_MBAR + MCFSIM_ICR4);
-
-	for (irq = 0; (irq < NR_IRQS); irq++) {
-		irq_set_chip(irq, &intc_irq_chip);
-		edge = 0;
-		if ((irq >= MCFINT_VECBASE) && (irq <= MCFINT_VECMAX))
-			edge = intc_irqmap[irq - MCFINT_VECBASE].ack;
-		if (edge) {
-			irq_set_irq_type(irq, IRQ_TYPE_EDGE_RISING);
-			irq_set_handler(irq, intc_external_irq);
-		} else {
-			irq_set_irq_type(irq, IRQ_TYPE_LEVEL_HIGH);
-			irq_set_handler(irq, handle_level_irq);
-		}
-	}
-}
-
diff --git a/ANDROID_3.4.5/arch/m68k/platform/527x/Makefile b/ANDROID_3.4.5/arch/m68k/platform/527x/Makefile
deleted file mode 100644
index 6ac4b573..00000000
--- a/ANDROID_3.4.5/arch/m68k/platform/527x/Makefile
+++ /dev/null
@@ -1,18 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-#
-# If you want to play with the HW breakpoints then you will
-# need to add define this,  which will give you a stack backtrace
-# on the console port whenever a DBG interrupt occurs.  You have to
-# set up you HW breakpoints to trigger a DBG interrupt:
-#
-# ccflags-y := -DTRAP_DBG_INTERRUPT
-# asflags-y := -DTRAP_DBG_INTERRUPT
-#
-
-asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
-
-obj-y := config.o gpio.o
-
diff --git a/ANDROID_3.4.5/arch/m68k/platform/527x/config.c b/ANDROID_3.4.5/arch/m68k/platform/527x/config.c
deleted file mode 100644
index b3cb378c..00000000
--- a/ANDROID_3.4.5/arch/m68k/platform/527x/config.c
+++ /dev/null
@@ -1,98 +0,0 @@
-/***************************************************************************/
-
-/*
- *	linux/arch/m68knommu/platform/527x/config.c
- *
- *	Sub-architcture dependent initialization code for the Freescale
- *	5270/5271 CPUs.
- *
- *	Copyright (C) 1999-2004, Greg Ungerer (gerg@snapgear.com)
- *	Copyright (C) 2001-2004, SnapGear Inc. (www.snapgear.com)
- */
-
-/***************************************************************************/
-
-#include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <asm/machdep.h>
-#include <asm/coldfire.h>
-#include <asm/mcfsim.h>
-#include <asm/mcfuart.h>
-
-/***************************************************************************/
-
-#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
-
-static void __init m527x_qspi_init(void)
-{
-#if defined(CONFIG_M5271)
-	u16 par;
-
-	/* setup QSPS pins for QSPI with gpio CS control */
-	writeb(0x1f, MCFGPIO_PAR_QSPI);
-	/* and CS2 & CS3 as gpio */
-	par = readw(MCFGPIO_PAR_TIMER);
-	par &= 0x3f3f;
-	writew(par, MCFGPIO_PAR_TIMER);
-#elif defined(CONFIG_M5275)
-	/* setup QSPS pins for QSPI with gpio CS control */
-	writew(0x003e, MCFGPIO_PAR_QSPI);
-#endif
-}
-
-#endif /* IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) */
-
-/***************************************************************************/
-
-static void __init m527x_uarts_init(void)
-{
-	u16 sepmask;
-
-	/*
-	 * External Pin Mask Setting & Enable External Pin for Interface
-	 */
-	sepmask = readw(MCF_IPSBAR + MCF_GPIO_PAR_UART);
-	sepmask |= UART0_ENABLE_MASK | UART1_ENABLE_MASK | UART2_ENABLE_MASK;
-	writew(sepmask, MCF_IPSBAR + MCF_GPIO_PAR_UART);
-}
-
-/***************************************************************************/
-
-static void __init m527x_fec_init(void)
-{
-	u16 par;
-	u8 v;
-
-	/* Set multi-function pins to ethernet mode for fec0 */
-#if defined(CONFIG_M5271)
-	v = readb(MCF_IPSBAR + 0x100047);
-	writeb(v | 0xf0, MCF_IPSBAR + 0x100047);
-#else
-	par = readw(MCF_IPSBAR + 0x100082);
-	writew(par | 0xf00, MCF_IPSBAR + 0x100082);
-	v = readb(MCF_IPSBAR + 0x100078);
-	writeb(v | 0xc0, MCF_IPSBAR + 0x100078);
-
-	/* Set multi-function pins to ethernet mode for fec1 */
-	par = readw(MCF_IPSBAR + 0x100082);
-	writew(par | 0xa0, MCF_IPSBAR + 0x100082);
-	v = readb(MCF_IPSBAR + 0x100079);
-	writeb(v | 0xc0, MCF_IPSBAR + 0x100079);
-#endif
-}
-
-/***************************************************************************/
-
-void __init config_BSP(char *commandp, int size)
-{
-	mach_sched_init = hw_timer_init;
-	m527x_uarts_init();
-	m527x_fec_init();
-#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
-	m527x_qspi_init();
-#endif
-}
-
-/***************************************************************************/
diff --git a/ANDROID_3.4.5/arch/m68k/platform/527x/gpio.c b/ANDROID_3.4.5/arch/m68k/platform/527x/gpio.c
deleted file mode 100644
index 205da0aa..00000000
--- a/ANDROID_3.4.5/arch/m68k/platform/527x/gpio.c
+++ /dev/null
@@ -1,609 +0,0 @@
-/*
- * Coldfire generic GPIO support
- *
- * (C) Copyright 2009, Steven King <sfking@fdwdc.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
-*/
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-#include <asm/coldfire.h>
-#include <asm/mcfsim.h>
-#include <asm/mcfgpio.h>
-
-static struct mcf_gpio_chip mcf_gpio_chips[] = {
-#if defined(CONFIG_M5271)
-	{
-		.gpio_chip			= {
-			.label			= "PIRQ",
-			.request		= mcf_gpio_request,
-			.free			= mcf_gpio_free,
-			.direction_input	= mcf_gpio_direction_input,
-			.direction_output	= mcf_gpio_direction_output,
-			.get			= mcf_gpio_get_value,
-			.set			= mcf_gpio_set_value,
-			.base			= 1,
-			.ngpio			= 7,
-		},
-		.pddr				= (void __iomem *) MCFEPORT_EPDDR,
-		.podr				= (void __iomem *) MCFEPORT_EPDR,
-		.ppdr				= (void __iomem *) MCFEPORT_EPPDR,
-	},
-	{
-		.gpio_chip			= {
-			.label			= "ADDR",
-			.request		= mcf_gpio_request,
-			.free			= mcf_gpio_free,
-			.direction_input	= mcf_gpio_direction_input,
-			.direction_output	= mcf_gpio_direction_output,
-			.get			= mcf_gpio_get_value,
-			.set			= mcf_gpio_set_value_fast,
-			.base			= 13,
-			.ngpio			= 3,
-		},
-		.pddr				= (void __iomem *) MCFGPIO_PDDR_ADDR,
-		.podr				= (void __iomem *) MCFGPIO_PODR_ADDR,
-		.ppdr				= (void __iomem *) MCFGPIO_PPDSDR_ADDR,
-		.setr				= (void __iomem *) MCFGPIO_PPDSDR_ADDR,
-		.clrr				= (void __iomem *) MCFGPIO_PCLRR_ADDR,
-	},
-	{
-		.gpio_chip			= {
-			.label			= "DATAH",
-			.request		= mcf_gpio_request,
-			.free			= mcf_gpio_free,
-			.direction_input	= mcf_gpio_direction_input,
-			.direction_output	= mcf_gpio_direction_output,
-			.get			= mcf_gpio_get_value,
-			.set			= mcf_gpio_set_value_fast,
-			.base			= 16,
-			.ngpio			= 8,
-		},
-		.pddr				= (void __iomem *) MCFGPIO_PDDR_DATAH,
-		.podr				= (void __iomem *) MCFGPIO_PODR_DATAH,
-		.ppdr				= (void __iomem *) MCFGPIO_PPDSDR_DATAH,
-		.setr				= (void __iomem *) MCFGPIO_PPDSDR_DATAH,
-		.clrr				= (void __iomem *) MCFGPIO_PCLRR_DATAH,
-	},
-	{
-		.gpio_chip			= {
-			.label			= "DATAL",
-			.request		= mcf_gpio_request,
-			.free			= mcf_gpio_free,
-			.direction_input	= mcf_gpio_direction_input,
-			.direction_output	= mcf_gpio_direction_output,
-			.get			= mcf_gpio_get_value,
-			.set			= mcf_gpio_set_value_fast,
-			.base			= 24,
-			.ngpio			= 8,
-		},
-		.pddr				= (void __iomem *) MCFGPIO_PDDR_DATAL,
-		.podr				= (void __iomem *) MCFGPIO_PODR_DATAL,
-		.ppdr				= (void __iomem *) MCFGPIO_PPDSDR_DATAL,
-		.setr				= (void __iomem *) MCFGPIO_PPDSDR_DATAL,
-		.clrr				= (void __iomem *) MCFGPIO_PCLRR_DATAL,
-	},
-	{
-		.gpio_chip			= {
-			.label			= "BUSCTL",
-			.request		= mcf_gpio_request,
-			.free			= mcf_gpio_free,
-			.direction_input	= mcf_gpio_direction_input,
-			.direction_output	= mcf_gpio_direction_output,
-			.get			= mcf_gpio_get_value,
-			.set			= mcf_gpio_set_value_fast,
-			.base			= 32,
-			.ngpio			= 8,
-		},
-		.pddr				= (void __iomem *) MCFGPIO_PDDR_BUSCTL,
-		.podr				= (void __iomem *) MCFGPIO_PODR_BUSCTL,
-		.ppdr				= (void __iomem *) MCFGPIO_PPDSDR_BUSCTL,
-		.setr				= (void __iomem *) MCFGPIO_PPDSDR_BUSCTL,
-		.clrr				= (void __iomem *) MCFGPIO_PCLRR_BUSCTL,
-	},
-	{
-		.gpio_chip			= {
-			.label			= "BS",
-			.request		= mcf_gpio_request,
-			.free			= mcf_gpio_free,
-			.direction_input	= mcf_gpio_direction_input,
-			.direction_output	= mcf_gpio_direction_output,
-			.get			= mcf_gpio_get_value,
-			.set			= mcf_gpio_set_value_fast,
-			.base			= 40,
-			.ngpio			= 4,
-		},
-		.pddr				= (void __iomem *) MCFGPIO_PDDR_BS,
-		.podr				= (void __iomem *) MCFGPIO_PODR_BS,
-		.ppdr				= (void __iomem *) MCFGPIO_PPDSDR_BS,
-		.setr				= (void __iomem *) MCFGPIO_PPDSDR_BS,
-		.clrr				= (void __iomem *) MCFGPIO_PCLRR_BS,
-	},
-	{
-		.gpio_chip			= {
-			.label			= "CS",
-			.request		= mcf_gpio_request,
-			.free			= mcf_gpio_free,
-			.direction_input	= mcf_gpio_direction_input,
-			.direction_output	= mcf_gpio_direction_output,
-			.get			= mcf_gpio_get_value,
-			.set			= mcf_gpio_set_value_fast,
-			.base			= 49,
-			.ngpio			= 7,
-		},
-		.pddr				= (void __iomem *) MCFGPIO_PDDR_CS,
-		.podr				= (void __iomem *) MCFGPIO_PODR_CS,
-		.ppdr				= (void __iomem *) MCFGPIO_PPDSDR_CS,
-		.setr				= (void __iomem *) MCFGPIO_PPDSDR_CS,
-		.clrr				= (void __iomem *) MCFGPIO_PCLRR_CS,
-	},
-	{
-		.gpio_chip			= {
-			.label			= "SDRAM",
-			.request		= mcf_gpio_request,
-			.free			= mcf_gpio_free,
-			.direction_input	= mcf_gpio_direction_input,
-			.direction_output	= mcf_gpio_direction_output,
-			.get			= mcf_gpio_get_value,
-			.set			= mcf_gpio_set_value_fast,
-			.base			= 56,
-			.ngpio			= 6,
-		},
-		.pddr				= (void __iomem *) MCFGPIO_PDDR_SDRAM,
-		.podr				= (void __iomem *) MCFGPIO_PODR_SDRAM,
-		.ppdr				= (void __iomem *) MCFGPIO_PPDSDR_SDRAM,
-		.setr				= (void __iomem *) MCFGPIO_PPDSDR_SDRAM,
-		.clrr				= (void __iomem *) MCFGPIO_PCLRR_SDRAM,
-	},
-	{
-		.gpio_chip			= {
-			.label			= "FECI2C",
-			.request		= mcf_gpio_request,
-			.free			= mcf_gpio_free,
-			.direction_input	= mcf_gpio_direction_input,
-			.direction_output	= mcf_gpio_direction_output,
-			.get			= mcf_gpio_get_value,
-			.set			= mcf_gpio_set_value_fast,
-			.base			= 64,
-			.ngpio			= 4,
-		},
-		.pddr				= (void __iomem *) MCFGPIO_PDDR_FECI2C,
-		.podr				= (void __iomem *) MCFGPIO_PODR_FECI2C,
-		.ppdr				= (void __iomem *) MCFGPIO_PPDSDR_FECI2C,
-		.setr				= (void __iomem *) MCFGPIO_PPDSDR_FECI2C,
-		.clrr				= (void __iomem *) MCFGPIO_PCLRR_FECI2C,
-	},
-	{
-		.gpio_chip			= {
-			.label			= "UARTH",
-			.request		= mcf_gpio_request,
-			.free			= mcf_gpio_free,
-			.direction_input	= mcf_gpio_direction_input,
-			.direction_output	= mcf_gpio_direction_output,
-			.get			= mcf_gpio_get_value,
-			.set			= mcf_gpio_set_value_fast,
-			.base			= 72,
-			.ngpio			= 2,
-		},
-		.pddr				= (void __iomem *) MCFGPIO_PDDR_UARTH,
-		.podr				= (void __iomem *) MCFGPIO_PODR_UARTH,
-		.ppdr				= (void __iomem *) MCFGPIO_PPDSDR_UARTH,
-		.setr				= (void __iomem *) MCFGPIO_PPDSDR_UARTH,
-		.clrr				= (void __iomem *) MCFGPIO_PCLRR_UARTH,
-	},
-	{
-		.gpio_chip			= {
-			.label			= "UARTL",
-			.request		= mcf_gpio_request,
-			.free			= mcf_gpio_free,
-			.direction_input	= mcf_gpio_direction_input,
-			.direction_output	= mcf_gpio_direction_output,
-			.get			= mcf_gpio_get_value,
-			.set			= mcf_gpio_set_value_fast,
-			.base			= 80,
-			.ngpio			= 8,
-		},
-		.pddr				= (void __iomem *) MCFGPIO_PDDR_UARTL,
-		.podr				= (void __iomem *) MCFGPIO_PODR_UARTL,
-		.ppdr				= (void __iomem *) MCFGPIO_PPDSDR_UARTL,
-		.setr				= (void __iomem *) MCFGPIO_PPDSDR_UARTL,
-		.clrr				= (void __iomem *) MCFGPIO_PCLRR_UARTL,
-	},
-	{
-		.gpio_chip			= {
-			.label			= "QSPI",
-			.request		= mcf_gpio_request,
-			.free			= mcf_gpio_free,
-			.direction_input	= mcf_gpio_direction_input,
-			.direction_output	= mcf_gpio_direction_output,
-			.get			= mcf_gpio_get_value,
-			.set			= mcf_gpio_set_value_fast,
-			.base			= 88,
-			.ngpio			= 5,
-		},
-		.pddr				= (void __iomem *) MCFGPIO_PDDR_QSPI,
-		.podr				= (void __iomem *) MCFGPIO_PODR_QSPI,
-		.ppdr				= (void __iomem *) MCFGPIO_PPDSDR_QSPI,
-		.setr				= (void __iomem *) MCFGPIO_PPDSDR_QSPI,
-		.clrr				= (void __iomem *) MCFGPIO_PCLRR_QSPI,
-	},
-	{
-		.gpio_chip			= {
-			.label			= "TIMER",
-			.request		= mcf_gpio_request,
-			.free			= mcf_gpio_free,
-			.direction_input	= mcf_gpio_direction_input,
-			.direction_output	= mcf_gpio_direction_output,
-			.get			= mcf_gpio_get_value,
-			.set			= mcf_gpio_set_value_fast,
-			.base			= 96,
-			.ngpio			= 8,
-		},
-		.pddr				= (void __iomem *) MCFGPIO_PDDR_TIMER,
-		.podr				= (void __iomem *) MCFGPIO_PODR_TIMER,
-		.ppdr				= (void __iomem *) MCFGPIO_PPDSDR_TIMER,
-		.setr				= (void __iomem *) MCFGPIO_PPDSDR_TIMER,
-		.clrr				= (void __iomem *) MCFGPIO_PCLRR_TIMER,
-	},
-#elif defined(CONFIG_M5275)
-	{
-		.gpio_chip			= {
-			.label			= "PIRQ",
-			.request		= mcf_gpio_request,
-			.free			= mcf_gpio_free,
-			.direction_input	= mcf_gpio_direction_input,
-			.direction_output	= mcf_gpio_direction_output,
-			.get			= mcf_gpio_get_value,
-			.set			= mcf_gpio_set_value,
-			.base			= 1,
-			.ngpio			= 7,
-		},
-		.pddr				= (void __iomem *) MCFEPORT_EPDDR,
-		.podr				= (void __iomem *) MCFEPORT_EPDR,
-		.ppdr				= (void __iomem *) MCFEPORT_EPPDR,
-	},
-	{
-		.gpio_chip			= {
-			.label			= "BUSCTL",
-			.request		= mcf_gpio_request,
-			.free			= mcf_gpio_free,
-			.direction_input	= mcf_gpio_direction_input,
-			.direction_output	= mcf_gpio_direction_output,
-			.get			= mcf_gpio_get_value,
-			.set			= mcf_gpio_set_value_fast,
-			.base			= 8,
-			.ngpio			= 8,
-		},
-		.pddr				= (void __iomem *) MCFGPIO_PDDR_BUSCTL,
-		.podr				= (void __iomem *) MCFGPIO_PODR_BUSCTL,
-		.ppdr				= (void __iomem *) MCFGPIO_PPDSDR_BUSCTL,
-		.setr				= (void __iomem *) MCFGPIO_PPDSDR_BUSCTL,
-		.clrr				= (void __iomem *) MCFGPIO_PCLRR_BUSCTL,
-	},
-	{
-		.gpio_chip			= {
-			.label			= "ADDR",
-			.request		= mcf_gpio_request,
-			.free			= mcf_gpio_free,
-			.direction_input	= mcf_gpio_direction_input,
-			.direction_output	= mcf_gpio_direction_output,
-			.get			= mcf_gpio_get_value,
-			.set			= mcf_gpio_set_value_fast,
-			.base			= 21,
-			.ngpio			= 3,
-		},
-		.pddr				= (void __iomem *) MCFGPIO_PDDR_ADDR,
-		.podr				= (void __iomem *) MCFGPIO_PODR_ADDR,
-		.ppdr				= (void __iomem *) MCFGPIO_PPDSDR_ADDR,
-		.setr				= (void __iomem *) MCFGPIO_PPDSDR_ADDR,
-		.clrr				= (void __iomem *) MCFGPIO_PCLRR_ADDR,
-	},
-	{
-		.gpio_chip			= {
-			.label			= "CS",
-			.request		= mcf_gpio_request,
-			.free			= mcf_gpio_free,
-			.direction_input	= mcf_gpio_direction_input,
-			.direction_output	= mcf_gpio_direction_output,
-			.get			= mcf_gpio_get_value,
-			.set			= mcf_gpio_set_value_fast,
-			.base			= 25,
-			.ngpio			= 7,
-		},
-		.pddr				= (void __iomem *) MCFGPIO_PDDR_CS,
-		.podr				= (void __iomem *) MCFGPIO_PODR_CS,
-		.ppdr				= (void __iomem *) MCFGPIO_PPDSDR_CS,
-		.setr				= (void __iomem *) MCFGPIO_PPDSDR_CS,
-		.clrr				= (void __iomem *) MCFGPIO_PCLRR_CS,
-	},
-	{
-		.gpio_chip			= {
-			.label			= "FEC0H",
-			.request		= mcf_gpio_request,
-			.free			= mcf_gpio_free,
-			.direction_input	= mcf_gpio_direction_input,
-			.direction_output	= mcf_gpio_direction_output,
-			.get			= mcf_gpio_get_value,
-			.set			= mcf_gpio_set_value_fast,
-			.base			= 32,
-			.ngpio			= 8,
-		},
-		.pddr				= (void __iomem *) MCFGPIO_PDDR_FEC0H,
-		.podr				= (void __iomem *) MCFGPIO_PODR_FEC0H,
-		.ppdr				= (void __iomem *) MCFGPIO_PPDSDR_FEC0H,
-		.setr				= (void __iomem *) MCFGPIO_PPDSDR_FEC0H,
-		.clrr				= (void __iomem *) MCFGPIO_PCLRR_FEC0H,
-	},
-	{
-		.gpio_chip			= {
-			.label			= "FEC0L",
-			.request		= mcf_gpio_request,
-			.free			= mcf_gpio_free,
-			.direction_input	= mcf_gpio_direction_input,
-			.direction_output	= mcf_gpio_direction_output,
-			.get			= mcf_gpio_get_value,
-			.set			= mcf_gpio_set_value_fast,
-			.base			= 40,
-			.ngpio			= 8,
-		},
-		.pddr				= (void __iomem *) MCFGPIO_PDDR_FEC0L,
-		.podr				= (void __iomem *) MCFGPIO_PODR_FEC0L,
-		.ppdr				= (void __iomem *) MCFGPIO_PPDSDR_FEC0L,
-		.setr				= (void __iomem *) MCFGPIO_PPDSDR_FEC0L,
-		.clrr				= (void __iomem *) MCFGPIO_PCLRR_FEC0L,
-	},
-	{
-		.gpio_chip			= {
-			.label			= "FECI2C",
-			.request		= mcf_gpio_request,
-			.free			= mcf_gpio_free,
-			.direction_input	= mcf_gpio_direction_input,
-			.direction_output	= mcf_gpio_direction_output,
-			.get			= mcf_gpio_get_value,
-			.set			= mcf_gpio_set_value_fast,
-			.base			= 48,
-			.ngpio			= 6,
-		},
-		.pddr				= (void __iomem *) MCFGPIO_PDDR_FECI2C,
-		.podr				= (void __iomem *) MCFGPIO_PODR_FECI2C,
-		.ppdr				= (void __iomem *) MCFGPIO_PPDSDR_FECI2C,
-		.setr				= (void __iomem *) MCFGPIO_PPDSDR_FECI2C,
-		.clrr				= (void __iomem *) MCFGPIO_PCLRR_FECI2C,
-	},
-	{
-		.gpio_chip			= {
-			.label			= "QSPI",
-			.request		= mcf_gpio_request,
-			.free			= mcf_gpio_free,
-			.direction_input	= mcf_gpio_direction_input,
-			.direction_output	= mcf_gpio_direction_output,
-			.get			= mcf_gpio_get_value,
-			.set			= mcf_gpio_set_value_fast,
-			.base			= 56,
-			.ngpio			= 7,
-		},
-		.pddr				= (void __iomem *) MCFGPIO_PDDR_QSPI,
-		.podr				= (void __iomem *) MCFGPIO_PODR_QSPI,
-		.ppdr				= (void __iomem *) MCFGPIO_PPDSDR_QSPI,
-		.setr				= (void __iomem *) MCFGPIO_PPDSDR_QSPI,
-		.clrr				= (void __iomem *) MCFGPIO_PCLRR_QSPI,
-	},
-	{
-		.gpio_chip			= {
-			.label			= "SDRAM",
-			.request		= mcf_gpio_request,
-			.free			= mcf_gpio_free,
-			.direction_input	= mcf_gpio_direction_input,
-			.direction_output	= mcf_gpio_direction_output,
-			.get			= mcf_gpio_get_value,
-			.set			= mcf_gpio_set_value_fast,
-			.base			= 64,
-			.ngpio			= 8,
-		},
-		.pddr				= (void __iomem *) MCFGPIO_PDDR_SDRAM,
-		.podr				= (void __iomem *) MCFGPIO_PODR_SDRAM,
-		.ppdr				= (void __iomem *) MCFGPIO_PPDSDR_SDRAM,
-		.setr				= (void __iomem *) MCFGPIO_PPDSDR_SDRAM,
-		.clrr				= (void __iomem *) MCFGPIO_PCLRR_SDRAM,
-	},
-	{
-		.gpio_chip			= {
-			.label			= "TIMERH",
-			.request		= mcf_gpio_request,
-			.free			= mcf_gpio_free,
-			.direction_input	= mcf_gpio_direction_input,
-			.direction_output	= mcf_gpio_direction_output,
-			.get			= mcf_gpio_get_value,
-			.set			= mcf_gpio_set_value_fast,
-			.base			= 72,
-			.ngpio			= 4,
-		},
-		.pddr				= (void __iomem *) MCFGPIO_PDDR_TIMERH,
-		.podr				= (void __iomem *) MCFGPIO_PODR_TIMERH,
-		.ppdr				= (void __iomem *) MCFGPIO_PPDSDR_TIMERH,
-		.setr				= (void __iomem *) MCFGPIO_PPDSDR_TIMERH,
-		.clrr				= (void __iomem *) MCFGPIO_PCLRR_TIMERH,
-	},
-	{
-		.gpio_chip			= {
-			.label			= "TIMERL",
-			.request		= mcf_gpio_request,
-			.free			= mcf_gpio_free,
-			.direction_input	= mcf_gpio_direction_input,
-			.direction_output	= mcf_gpio_direction_output,
-			.get			= mcf_gpio_get_value,
-			.set			= mcf_gpio_set_value_fast,
-			.base			= 80,
-			.ngpio			= 4,
-		},
-		.pddr				= (void __iomem *) MCFGPIO_PDDR_TIMERL,
-		.podr				= (void __iomem *) MCFGPIO_PODR_TIMERL,
-		.ppdr				= (void __iomem *) MCFGPIO_PPDSDR_TIMERL,
-		.setr				= (void __iomem *) MCFGPIO_PPDSDR_TIMERL,
-		.clrr				= (void __iomem *) MCFGPIO_PCLRR_TIMERL,
-	},
-	{
-		.gpio_chip			= {
-			.label			= "UARTL",
-			.request		= mcf_gpio_request,
-			.free			= mcf_gpio_free,
-			.direction_input	= mcf_gpio_direction_input,
-			.direction_output	= mcf_gpio_direction_output,
-			.get			= mcf_gpio_get_value,
-			.set			= mcf_gpio_set_value_fast,
-			.base			= 88,
-			.ngpio			= 8,
-		},
-		.pddr				= (void __iomem *) MCFGPIO_PDDR_UARTL,
-		.podr				= (void __iomem *) MCFGPIO_PODR_UARTL,
-		.ppdr				= (void __iomem *) MCFGPIO_PPDSDR_UARTL,
-		.setr				= (void __iomem *) MCFGPIO_PPDSDR_UARTL,
-		.clrr				= (void __iomem *) MCFGPIO_PCLRR_UARTL,
-	},
-	{
-		.gpio_chip			= {
-			.label			= "FEC1H",
-			.request		= mcf_gpio_request,
-			.free			= mcf_gpio_free,
-			.direction_input	= mcf_gpio_direction_input,
-			.direction_output	= mcf_gpio_direction_output,
-			.get			= mcf_gpio_get_value,
-			.set			= mcf_gpio_set_value_fast,
-			.base			= 96,
-			.ngpio			= 8,
-		},
-		.pddr				= (void __iomem *) MCFGPIO_PDDR_FEC1H,
-		.podr				= (void __iomem *) MCFGPIO_PODR_FEC1H,
-		.ppdr				= (void __iomem *) MCFGPIO_PPDSDR_FEC1H,
-		.setr				= (void __iomem *) MCFGPIO_PPDSDR_FEC1H,
-		.clrr				= (void __iomem *) MCFGPIO_PCLRR_FEC1H,
-	},
-	{
-		.gpio_chip			= {
-			.label			= "FEC1L",
-			.request		= mcf_gpio_request,
-			.free			= mcf_gpio_free,
-			.direction_input	= mcf_gpio_direction_input,
-			.direction_output	= mcf_gpio_direction_output,
-			.get			= mcf_gpio_get_value,
-			.set			= mcf_gpio_set_value_fast,
-			.base			= 104,
-			.ngpio			= 8,
-		},
-		.pddr				= (void __iomem *) MCFGPIO_PDDR_FEC1L,
-		.podr				= (void __iomem *) MCFGPIO_PODR_FEC1L,
-		.ppdr				= (void __iomem *) MCFGPIO_PPDSDR_FEC1L,
-		.setr				= (void __iomem *) MCFGPIO_PPDSDR_FEC1L,
-		.clrr				= (void __iomem *) MCFGPIO_PCLRR_FEC1L,
-	},
-	{
-		.gpio_chip			= {
-			.label			= "BS",
-			.request		= mcf_gpio_request,
-			.free			= mcf_gpio_free,
-			.direction_input	= mcf_gpio_direction_input,
-			.direction_output	= mcf_gpio_direction_output,
-			.get			= mcf_gpio_get_value,
-			.set			= mcf_gpio_set_value_fast,
-			.base			= 114,
-			.ngpio			= 2,
-		},
-		.pddr				= (void __iomem *) MCFGPIO_PDDR_BS,
-		.podr				= (void __iomem *) MCFGPIO_PODR_BS,
-		.ppdr				= (void __iomem *) MCFGPIO_PPDSDR_BS,
-		.setr				= (void __iomem *) MCFGPIO_PPDSDR_BS,
-		.clrr				= (void __iomem *) MCFGPIO_PCLRR_BS,
-	},
-	{
-		.gpio_chip			= {
-			.label			= "IRQ",
-			.request		= mcf_gpio_request,
-			.free			= mcf_gpio_free,
-			.direction_input	= mcf_gpio_direction_input,
-			.direction_output	= mcf_gpio_direction_output,
-			.get			= mcf_gpio_get_value,
-			.set			= mcf_gpio_set_value_fast,
-			.base			= 121,
-			.ngpio			= 7,
-		},
-		.pddr				= (void __iomem *) MCFGPIO_PDDR_IRQ,
-		.podr				= (void __iomem *) MCFGPIO_PODR_IRQ,
-		.ppdr				= (void __iomem *) MCFGPIO_PPDSDR_IRQ,
-		.setr				= (void __iomem *) MCFGPIO_PPDSDR_IRQ,
-		.clrr				= (void __iomem *) MCFGPIO_PCLRR_IRQ,
-	},
-	{
-		.gpio_chip			= {
-			.label			= "USBH",
-			.request		= mcf_gpio_request,
-			.free			= mcf_gpio_free,
-			.direction_input	= mcf_gpio_direction_input,
-			.direction_output	= mcf_gpio_direction_output,
-			.get			= mcf_gpio_get_value,
-			.set			= mcf_gpio_set_value_fast,
-			.base			= 128,
-			.ngpio			= 1,
-		},
-		.pddr				= (void __iomem *) MCFGPIO_PDDR_USBH,
-		.podr				= (void __iomem *) MCFGPIO_PODR_USBH,
-		.ppdr				= (void __iomem *) MCFGPIO_PPDSDR_USBH,
-		.setr				= (void __iomem *) MCFGPIO_PPDSDR_USBH,
-		.clrr				= (void __iomem *) MCFGPIO_PCLRR_USBH,
-	},
-	{
-		.gpio_chip			= {
-			.label			= "USBL",
-			.request		= mcf_gpio_request,
-			.free			= mcf_gpio_free,
-			.direction_input	= mcf_gpio_direction_input,
-			.direction_output	= mcf_gpio_direction_output,
-			.get			= mcf_gpio_get_value,
-			.set			= mcf_gpio_set_value_fast,
-			.base			= 136,
-			.ngpio			= 8,
-		},
-		.pddr				= (void __iomem *) MCFGPIO_PDDR_USBL,
-		.podr				= (void __iomem *) MCFGPIO_PODR_USBL,
-		.ppdr				= (void __iomem *) MCFGPIO_PPDSDR_USBL,
-		.setr				= (void __iomem *) MCFGPIO_PPDSDR_USBL,
-		.clrr				= (void __iomem *) MCFGPIO_PCLRR_USBL,
-	},
-	{
-		.gpio_chip			= {
-			.label			= "UARTH",
-			.request		= mcf_gpio_request,
-			.free			= mcf_gpio_free,
-			.direction_input	= mcf_gpio_direction_input,
-			.direction_output	= mcf_gpio_direction_output,
-			.get			= mcf_gpio_get_value,
-			.set			= mcf_gpio_set_value_fast,
-			.base			= 144,
-			.ngpio			= 4,
-		},
-		.pddr				= (void __iomem *) MCFGPIO_PDDR_UARTH,
-		.podr				= (void __iomem *) MCFGPIO_PODR_UARTH,
-		.ppdr				= (void __iomem *) MCFGPIO_PPDSDR_UARTH,
-		.setr				= (void __iomem *) MCFGPIO_PPDSDR_UARTH,
-		.clrr				= (void __iomem *) MCFGPIO_PCLRR_UARTH,
-	},
-#endif
-};
-
-static int __init mcf_gpio_init(void)
-{
-	unsigned i = 0;
-	while (i < ARRAY_SIZE(mcf_gpio_chips))
-		(void)gpiochip_add((struct gpio_chip *)&mcf_gpio_chips[i++]);
-	return 0;
-}
-
-core_initcall(mcf_gpio_init);
diff --git a/ANDROID_3.4.5/arch/m68k/platform/528x/Makefile b/ANDROID_3.4.5/arch/m68k/platform/528x/Makefile
deleted file mode 100644
index 6ac4b573..00000000
--- a/ANDROID_3.4.5/arch/m68k/platform/528x/Makefile
+++ /dev/null
@@ -1,18 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-#
-# If you want to play with the HW breakpoints then you will
-# need to add define this,  which will give you a stack backtrace
-# on the console port whenever a DBG interrupt occurs.  You have to
-# set up you HW breakpoints to trigger a DBG interrupt:
-#
-# ccflags-y := -DTRAP_DBG_INTERRUPT
-# asflags-y := -DTRAP_DBG_INTERRUPT
-#
-
-asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
-
-obj-y := config.o gpio.o
-
diff --git a/ANDROID_3.4.5/arch/m68k/platform/528x/config.c b/ANDROID_3.4.5/arch/m68k/platform/528x/config.c
deleted file mode 100644
index c5f11ba4..00000000
--- a/ANDROID_3.4.5/arch/m68k/platform/528x/config.c
+++ /dev/null
@@ -1,106 +0,0 @@
-/***************************************************************************/
-
-/*
- *	linux/arch/m68knommu/platform/528x/config.c
- *
- *	Sub-architcture dependent initialization code for the Freescale
- *	5280, 5281 and 5282 CPUs.
- *
- *	Copyright (C) 1999-2003, Greg Ungerer (gerg@snapgear.com)
- *	Copyright (C) 2001-2003, SnapGear Inc. (www.snapgear.com)
- */
-
-/***************************************************************************/
-
-#include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <asm/machdep.h>
-#include <asm/coldfire.h>
-#include <asm/mcfsim.h>
-#include <asm/mcfuart.h>
-
-/***************************************************************************/
-
-#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
-
-static void __init m528x_qspi_init(void)
-{
-	/* setup Port QS for QSPI with gpio CS control */
-	__raw_writeb(0x07, MCFGPIO_PQSPAR);
-}
-
-#endif /* IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) */
-
-/***************************************************************************/
-
-static void __init m528x_uarts_init(void)
-{
-	u8 port;
-
-	/* make sure PUAPAR is set for UART0 and UART1 */
-	port = readb(MCF5282_GPIO_PUAPAR);
-	port |= 0x03 | (0x03 << 2);
-	writeb(port, MCF5282_GPIO_PUAPAR);
-}
-
-/***************************************************************************/
-
-static void __init m528x_fec_init(void)
-{
-	u16 v16;
-
-	/* Set multi-function pins to ethernet mode for fec0 */
-	v16 = readw(MCF_IPSBAR + 0x100056);
-	writew(v16 | 0xf00, MCF_IPSBAR + 0x100056);
-	writeb(0xc0, MCF_IPSBAR + 0x100058);
-}
-
-/***************************************************************************/
-
-#ifdef CONFIG_WILDFIRE
-void wildfire_halt(void)
-{
-	writeb(0, 0x30000007);
-	writeb(0x2, 0x30000007);
-}
-#endif
-
-#ifdef CONFIG_WILDFIREMOD
-void wildfiremod_halt(void)
-{
-	printk(KERN_INFO "WildFireMod hibernating...\n");
-
-	/* Set portE.5 to Digital IO */
-	MCF5282_GPIO_PEPAR &= ~(1 << (5 * 2));
-
-	/* Make portE.5 an output */
-	MCF5282_GPIO_DDRE |= (1 << 5);
-
-	/* Now toggle portE.5 from low to high */
-	MCF5282_GPIO_PORTE &= ~(1 << 5);
-	MCF5282_GPIO_PORTE |= (1 << 5);
-
-	printk(KERN_EMERG "Failed to hibernate. Halting!\n");
-}
-#endif
-
-void __init config_BSP(char *commandp, int size)
-{
-#ifdef CONFIG_WILDFIRE
-	mach_halt = wildfire_halt;
-#endif
-#ifdef CONFIG_WILDFIREMOD
-	mach_halt = wildfiremod_halt;
-#endif
-	mach_sched_init = hw_timer_init;
-	m528x_uarts_init();
-	m528x_fec_init();
-#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
-	m528x_qspi_init();
-#endif
-}
-
-/***************************************************************************/
diff --git a/ANDROID_3.4.5/arch/m68k/platform/528x/gpio.c b/ANDROID_3.4.5/arch/m68k/platform/528x/gpio.c
deleted file mode 100644
index 526db665..00000000
--- a/ANDROID_3.4.5/arch/m68k/platform/528x/gpio.c
+++ /dev/null
@@ -1,438 +0,0 @@
-/*
- * Coldfire generic GPIO support
- *
- * (C) Copyright 2009, Steven King <sfking@fdwdc.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
-*/
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-#include <asm/coldfire.h>
-#include <asm/mcfsim.h>
-#include <asm/mcfgpio.h>
-
-static struct mcf_gpio_chip mcf_gpio_chips[] = {
-	{
-		.gpio_chip			= {
-			.label			= "NQ",
-			.request		= mcf_gpio_request,
-			.free			= mcf_gpio_free,
-			.direction_input	= mcf_gpio_direction_input,
-			.direction_output	= mcf_gpio_direction_output,
-			.get			= mcf_gpio_get_value,
-			.set			= mcf_gpio_set_value,
-			.base			= 1,
-			.ngpio			= 7,
-		},
-		.pddr				= (void __iomem *)MCFEPORT_EPDDR,
-		.podr				= (void __iomem *)MCFEPORT_EPDR,
-		.ppdr				= (void __iomem *)MCFEPORT_EPPDR,
-	},
-	{
-		.gpio_chip			= {
-			.label			= "TA",
-			.request		= mcf_gpio_request,
-			.free			= mcf_gpio_free,
-			.direction_input	= mcf_gpio_direction_input,
-			.direction_output	= mcf_gpio_direction_output,
-			.get			= mcf_gpio_get_value,
-			.set			= mcf_gpio_set_value_fast,
-			.base			= 8,
-			.ngpio			= 4,
-		},
-		.pddr				= (void __iomem *)MCFGPTA_GPTDDR,
-		.podr				= (void __iomem *)MCFGPTA_GPTPORT,
-		.ppdr				= (void __iomem *)MCFGPTB_GPTPORT,
-	},
-	{
-		.gpio_chip			= {
-			.label			= "TB",
-			.request		= mcf_gpio_request,
-			.free			= mcf_gpio_free,
-			.direction_input	= mcf_gpio_direction_input,
-			.direction_output	= mcf_gpio_direction_output,
-			.get			= mcf_gpio_get_value,
-			.set			= mcf_gpio_set_value_fast,
-			.base			= 16,
-			.ngpio			= 4,
-		},
-		.pddr				= (void __iomem *)MCFGPTB_GPTDDR,
-		.podr				= (void __iomem *)MCFGPTB_GPTPORT,
-		.ppdr				= (void __iomem *)MCFGPTB_GPTPORT,
-	},
-	{
-		.gpio_chip			= {
-			.label			= "QA",
-			.request		= mcf_gpio_request,
-			.free			= mcf_gpio_free,
-			.direction_input	= mcf_gpio_direction_input,
-			.direction_output	= mcf_gpio_direction_output,
-			.get			= mcf_gpio_get_value,
-			.set			= mcf_gpio_set_value_fast,
-			.base			= 24,
-			.ngpio			= 4,
-		},
-		.pddr				= (void __iomem *)MCFQADC_DDRQA,
-		.podr				= (void __iomem *)MCFQADC_PORTQA,
-		.ppdr				= (void __iomem *)MCFQADC_PORTQA,
-	},
-	{
-		.gpio_chip			= {
-			.label			= "QB",
-			.request		= mcf_gpio_request,
-			.free			= mcf_gpio_free,
-			.direction_input	= mcf_gpio_direction_input,
-			.direction_output	= mcf_gpio_direction_output,
-			.get			= mcf_gpio_get_value,
-			.set			= mcf_gpio_set_value_fast,
-			.base			= 32,
-			.ngpio			= 4,
-		},
-		.pddr				= (void __iomem *)MCFQADC_DDRQB,
-		.podr				= (void __iomem *)MCFQADC_PORTQB,
-		.ppdr				= (void __iomem *)MCFQADC_PORTQB,
-	},
-	{
-		.gpio_chip			= {
-			.label			= "A",
-			.request		= mcf_gpio_request,
-			.free			= mcf_gpio_free,
-			.direction_input	= mcf_gpio_direction_input,
-			.direction_output	= mcf_gpio_direction_output,
-			.get			= mcf_gpio_get_value,
-			.set			= mcf_gpio_set_value_fast,
-			.base			= 40,
-			.ngpio			= 8,
-		},
-		.pddr				= (void __iomem *)MCFGPIO_DDRA,
-		.podr				= (void __iomem *)MCFGPIO_PORTA,
-		.ppdr				= (void __iomem *)MCFGPIO_PORTAP,
-		.setr				= (void __iomem *)MCFGPIO_SETA,
-		.clrr				= (void __iomem *)MCFGPIO_CLRA,
-	},
-	{
-		.gpio_chip			= {
-			.label			= "B",
-			.request		= mcf_gpio_request,
-			.free			= mcf_gpio_free,
-			.direction_input	= mcf_gpio_direction_input,
-			.direction_output	= mcf_gpio_direction_output,
-			.get			= mcf_gpio_get_value,
-			.set			= mcf_gpio_set_value_fast,
-			.base			= 48,
-			.ngpio			= 8,
-		},
-		.pddr				= (void __iomem *)MCFGPIO_DDRB,
-		.podr				= (void __iomem *)MCFGPIO_PORTB,
-		.ppdr				= (void __iomem *)MCFGPIO_PORTBP,
-		.setr				= (void __iomem *)MCFGPIO_SETB,
-		.clrr				= (void __iomem *)MCFGPIO_CLRB,
-	},
-	{
-		.gpio_chip			= {
-			.label			= "C",
-			.request		= mcf_gpio_request,
-			.free			= mcf_gpio_free,
-			.direction_input	= mcf_gpio_direction_input,
-			.direction_output	= mcf_gpio_direction_output,
-			.get			= mcf_gpio_get_value,
-			.set			= mcf_gpio_set_value_fast,
-			.base			= 56,
-			.ngpio			= 8,
-		},
-		.pddr				= (void __iomem *)MCFGPIO_DDRC,
-		.podr				= (void __iomem *)MCFGPIO_PORTC,
-		.ppdr				= (void __iomem *)MCFGPIO_PORTCP,
-		.setr				= (void __iomem *)MCFGPIO_SETC,
-		.clrr				= (void __iomem *)MCFGPIO_CLRC,
-	},
-	{
-		.gpio_chip			= {
-			.label			= "D",
-			.request		= mcf_gpio_request,
-			.free			= mcf_gpio_free,
-			.direction_input	= mcf_gpio_direction_input,
-			.direction_output	= mcf_gpio_direction_output,
-			.get			= mcf_gpio_get_value,
-			.set			= mcf_gpio_set_value_fast,
-			.base			= 64,
-			.ngpio			= 8,
-		},
-		.pddr				= (void __iomem *)MCFGPIO_DDRD,
-		.podr				= (void __iomem *)MCFGPIO_PORTD,
-		.ppdr				= (void __iomem *)MCFGPIO_PORTDP,
-		.setr				= (void __iomem *)MCFGPIO_SETD,
-		.clrr				= (void __iomem *)MCFGPIO_CLRD,
-	},
-	{
-		.gpio_chip			= {
-			.label			= "E",
-			.request		= mcf_gpio_request,
-			.free			= mcf_gpio_free,
-			.direction_input	= mcf_gpio_direction_input,
-			.direction_output	= mcf_gpio_direction_output,
-			.get			= mcf_gpio_get_value,
-			.set			= mcf_gpio_set_value_fast,
-			.base			= 72,
-			.ngpio			= 8,
-		},
-		.pddr				= (void __iomem *)MCFGPIO_DDRE,
-		.podr				= (void __iomem *)MCFGPIO_PORTE,
-		.ppdr				= (void __iomem *)MCFGPIO_PORTEP,
-		.setr				= (void __iomem *)MCFGPIO_SETE,
-		.clrr				= (void __iomem *)MCFGPIO_CLRE,
-	},
-	{
-		.gpio_chip			= {
-			.label			= "F",
-			.request		= mcf_gpio_request,
-			.free			= mcf_gpio_free,
-			.direction_input	= mcf_gpio_direction_input,
-			.direction_output	= mcf_gpio_direction_output,
-			.get			= mcf_gpio_get_value,
-			.set			= mcf_gpio_set_value_fast,
-			.base			= 80,
-			.ngpio			= 8,
-		},
-		.pddr				= (void __iomem *)MCFGPIO_DDRF,
-		.podr				= (void __iomem *)MCFGPIO_PORTF,
-		.ppdr				= (void __iomem *)MCFGPIO_PORTFP,
-		.setr				= (void __iomem *)MCFGPIO_SETF,
-		.clrr				= (void __iomem *)MCFGPIO_CLRF,
-	},
-	{
-		.gpio_chip			= {
-			.label			= "G",
-			.request		= mcf_gpio_request,
-			.free			= mcf_gpio_free,
-			.direction_input	= mcf_gpio_direction_input,
-			.direction_output	= mcf_gpio_direction_output,
-			.get			= mcf_gpio_get_value,
-			.set			= mcf_gpio_set_value_fast,
-			.base			= 88,
-			.ngpio			= 8,
-		},
-		.pddr				= (void __iomem *)MCFGPIO_DDRG,
-		.podr				= (void __iomem *)MCFGPIO_PORTG,
-		.ppdr				= (void __iomem *)MCFGPIO_PORTGP,
-		.setr				= (void __iomem *)MCFGPIO_SETG,
-		.clrr				= (void __iomem *)MCFGPIO_CLRG,
-	},
-	{
-		.gpio_chip			= {
-			.label			= "H",
-			.request		= mcf_gpio_request,
-			.free			= mcf_gpio_free,
-			.direction_input	= mcf_gpio_direction_input,
-			.direction_output	= mcf_gpio_direction_output,
-			.get			= mcf_gpio_get_value,
-			.set			= mcf_gpio_set_value_fast,
-			.base			= 96,
-			.ngpio			= 8,
-		},
-		.pddr				= (void __iomem *)MCFGPIO_DDRH,
-		.podr				= (void __iomem *)MCFGPIO_PORTH,
-		.ppdr				= (void __iomem *)MCFGPIO_PORTHP,
-		.setr				= (void __iomem *)MCFGPIO_SETH,
-		.clrr				= (void __iomem *)MCFGPIO_CLRH,
-	},
-	{
-		.gpio_chip			= {
-			.label			= "J",
-			.request		= mcf_gpio_request,
-			.free			= mcf_gpio_free,
-			.direction_input	= mcf_gpio_direction_input,
-			.direction_output	= mcf_gpio_direction_output,
-			.get			= mcf_gpio_get_value,
-			.set			= mcf_gpio_set_value_fast,
-			.base			= 104,
-			.ngpio			= 8,
-		},
-		.pddr				= (void __iomem *)MCFGPIO_DDRJ,
-		.podr				= (void __iomem *)MCFGPIO_PORTJ,
-		.ppdr				= (void __iomem *)MCFGPIO_PORTJP,
-		.setr				= (void __iomem *)MCFGPIO_SETJ,
-		.clrr				= (void __iomem *)MCFGPIO_CLRJ,
-	},
-	{
-		.gpio_chip			= {
-			.label			= "DD",
-			.request		= mcf_gpio_request,
-			.free			= mcf_gpio_free,
-			.direction_input	= mcf_gpio_direction_input,
-			.direction_output	= mcf_gpio_direction_output,
-			.get			= mcf_gpio_get_value,
-			.set			= mcf_gpio_set_value_fast,
-			.base			= 112,
-			.ngpio			= 8,
-		},
-		.pddr				= (void __iomem *)MCFGPIO_DDRDD,
-		.podr				= (void __iomem *)MCFGPIO_PORTDD,
-		.ppdr				= (void __iomem *)MCFGPIO_PORTDDP,
-		.setr				= (void __iomem *)MCFGPIO_SETDD,
-		.clrr				= (void __iomem *)MCFGPIO_CLRDD,
-	},
-	{
-		.gpio_chip			= {
-			.label			= "EH",
-			.request		= mcf_gpio_request,
-			.free			= mcf_gpio_free,
-			.direction_input	= mcf_gpio_direction_input,
-			.direction_output	= mcf_gpio_direction_output,
-			.get			= mcf_gpio_get_value,
-			.set			= mcf_gpio_set_value_fast,
-			.base			= 120,
-			.ngpio			= 8,
-		},
-		.pddr				= (void __iomem *)MCFGPIO_DDREH,
-		.podr				= (void __iomem *)MCFGPIO_PORTEH,
-		.ppdr				= (void __iomem *)MCFGPIO_PORTEHP,
-		.setr				= (void __iomem *)MCFGPIO_SETEH,
-		.clrr				= (void __iomem *)MCFGPIO_CLREH,
-	},
-	{
-		.gpio_chip			= {
-			.label			= "EL",
-			.request		= mcf_gpio_request,
-			.free			= mcf_gpio_free,
-			.direction_input	= mcf_gpio_direction_input,
-			.direction_output	= mcf_gpio_direction_output,
-			.get			= mcf_gpio_get_value,
-			.set			= mcf_gpio_set_value_fast,
-			.base			= 128,
-			.ngpio			= 8,
-		},
-		.pddr				= (void __iomem *)MCFGPIO_DDREL,
-		.podr				= (void __iomem *)MCFGPIO_PORTEL,
-		.ppdr				= (void __iomem *)MCFGPIO_PORTELP,
-		.setr				= (void __iomem *)MCFGPIO_SETEL,
-		.clrr				= (void __iomem *)MCFGPIO_CLREL,
-	},
-	{
-		.gpio_chip			= {
-			.label			= "AS",
-			.request		= mcf_gpio_request,
-			.free			= mcf_gpio_free,
-			.direction_input	= mcf_gpio_direction_input,
-			.direction_output	= mcf_gpio_direction_output,
-			.get			= mcf_gpio_get_value,
-			.set			= mcf_gpio_set_value_fast,
-			.base			= 136,
-			.ngpio			= 6,
-		},
-		.pddr				= (void __iomem *)MCFGPIO_DDRAS,
-		.podr				= (void __iomem *)MCFGPIO_PORTAS,
-		.ppdr				= (void __iomem *)MCFGPIO_PORTASP,
-		.setr				= (void __iomem *)MCFGPIO_SETAS,
-		.clrr				= (void __iomem *)MCFGPIO_CLRAS,
-	},
-	{
-		.gpio_chip			= {
-			.label			= "QS",
-			.request		= mcf_gpio_request,
-			.free			= mcf_gpio_free,
-			.direction_input	= mcf_gpio_direction_input,
-			.direction_output	= mcf_gpio_direction_output,
-			.get			= mcf_gpio_get_value,
-			.set			= mcf_gpio_set_value_fast,
-			.base			= 144,
-			.ngpio			= 7,
-		},
-		.pddr				= (void __iomem *)MCFGPIO_DDRQS,
-		.podr				= (void __iomem *)MCFGPIO_PORTQS,
-		.ppdr				= (void __iomem *)MCFGPIO_PORTQSP,
-		.setr				= (void __iomem *)MCFGPIO_SETQS,
-		.clrr				= (void __iomem *)MCFGPIO_CLRQS,
-	},
-	{
-		.gpio_chip			= {
-			.label			= "SD",
-			.request		= mcf_gpio_request,
-			.free			= mcf_gpio_free,
-			.direction_input	= mcf_gpio_direction_input,
-			.direction_output	= mcf_gpio_direction_output,
-			.get			= mcf_gpio_get_value,
-			.set			= mcf_gpio_set_value_fast,
-			.base			= 152,
-			.ngpio			= 6,
-		},
-		.pddr				= (void __iomem *)MCFGPIO_DDRSD,
-		.podr				= (void __iomem *)MCFGPIO_PORTSD,
-		.ppdr				= (void __iomem *)MCFGPIO_PORTSDP,
-		.setr				= (void __iomem *)MCFGPIO_SETSD,
-		.clrr				= (void __iomem *)MCFGPIO_CLRSD,
-	},
-	{
-		.gpio_chip			= {
-			.label			= "TC",
-			.request		= mcf_gpio_request,
-			.free			= mcf_gpio_free,
-			.direction_input	= mcf_gpio_direction_input,
-			.direction_output	= mcf_gpio_direction_output,
-			.get			= mcf_gpio_get_value,
-			.set			= mcf_gpio_set_value_fast,
-			.base			= 160,
-			.ngpio			= 4,
-		},
-		.pddr				= (void __iomem *)MCFGPIO_DDRTC,
-		.podr				= (void __iomem *)MCFGPIO_PORTTC,
-		.ppdr				= (void __iomem *)MCFGPIO_PORTTCP,
-		.setr				= (void __iomem *)MCFGPIO_SETTC,
-		.clrr				= (void __iomem *)MCFGPIO_CLRTC,
-	},
-	{
-		.gpio_chip			= {
-			.label			= "TD",
-			.request		= mcf_gpio_request,
-			.free			= mcf_gpio_free,
-			.direction_input	= mcf_gpio_direction_input,
-			.direction_output	= mcf_gpio_direction_output,
-			.get			= mcf_gpio_get_value,
-			.set			= mcf_gpio_set_value_fast,
-			.base			= 168,
-			.ngpio			= 4,
-		},
-		.pddr				= (void __iomem *)MCFGPIO_DDRTD,
-		.podr				= (void __iomem *)MCFGPIO_PORTTD,
-		.ppdr				= (void __iomem *)MCFGPIO_PORTTDP,
-		.setr				= (void __iomem *)MCFGPIO_SETTD,
-		.clrr				= (void __iomem *)MCFGPIO_CLRTD,
-	},
-	{
-		.gpio_chip			= {
-			.label			= "UA",
-			.request		= mcf_gpio_request,
-			.free			= mcf_gpio_free,
-			.direction_input	= mcf_gpio_direction_input,
-			.direction_output	= mcf_gpio_direction_output,
-			.get			= mcf_gpio_get_value,
-			.set			= mcf_gpio_set_value_fast,
-			.base			= 176,
-			.ngpio			= 4,
-		},
-		.pddr				= (void __iomem *)MCFGPIO_DDRUA,
-		.podr				= (void __iomem *)MCFGPIO_PORTUA,
-		.ppdr				= (void __iomem *)MCFGPIO_PORTUAP,
-		.setr				= (void __iomem *)MCFGPIO_SETUA,
-		.clrr				= (void __iomem *)MCFGPIO_CLRUA,
-	},
-};
-
-static int __init mcf_gpio_init(void)
-{
-	unsigned i = 0;
-	while (i < ARRAY_SIZE(mcf_gpio_chips))
-		(void)gpiochip_add((struct gpio_chip *)&mcf_gpio_chips[i++]);
-	return 0;
-}
-
-core_initcall(mcf_gpio_init);
diff --git a/ANDROID_3.4.5/arch/m68k/platform/5307/Makefile b/ANDROID_3.4.5/arch/m68k/platform/5307/Makefile
deleted file mode 100644
index d4293b79..00000000
--- a/ANDROID_3.4.5/arch/m68k/platform/5307/Makefile
+++ /dev/null
@@ -1,20 +0,0 @@
-#
-# Makefile for the m68knommu kernel.
-#
-
-#
-# If you want to play with the HW breakpoints then you will
-# need to add define this,  which will give you a stack backtrace
-# on the console port whenever a DBG interrupt occurs. You have to
-# set up you HW breakpoints to trigger a DBG interrupt:
-#
-# ccflags-y := -DTRAP_DBG_INTERRUPT
-# asflags-y := -DTRAP_DBG_INTERRUPT
-#
-
-asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
-
-obj-y			+= config.o gpio.o
-obj-$(CONFIG_NETtel)	+= nettel.o
-obj-$(CONFIG_CLEOPATRA)	+= nettel.o
-
diff --git a/ANDROID_3.4.5/arch/m68k/platform/5307/config.c b/ANDROID_3.4.5/arch/m68k/platform/5307/config.c
deleted file mode 100644
index a568d287..00000000
--- a/ANDROID_3.4.5/arch/m68k/platform/5307/config.c
+++ /dev/null
@@ -1,58 +0,0 @@
-/***************************************************************************/
-
-/*
- *	linux/arch/m68knommu/platform/5307/config.c
- *
- *	Copyright (C) 1999-2002, Greg Ungerer (gerg@snapgear.com)
- *	Copyright (C) 2000, Lineo (www.lineo.com)
- */
-
-/***************************************************************************/
-
-#include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <asm/machdep.h>
-#include <asm/coldfire.h>
-#include <asm/mcfsim.h>
-#include <asm/mcfwdebug.h>
-
-/***************************************************************************/
-
-/*
- *	Some platforms need software versions of the GPIO data registers.
- */
-unsigned short ppdata;
-unsigned char ledbank = 0xff;
-
-/***************************************************************************/
-
-void __init config_BSP(char *commandp, int size)
-{
-#if defined(CONFIG_NETtel) || \
-    defined(CONFIG_SECUREEDGEMP3) || defined(CONFIG_CLEOPATRA)
-	/* Copy command line from FLASH to local buffer... */
-	memcpy(commandp, (char *) 0xf0004000, size);
-	commandp[size-1] = 0;
-#endif
-
-	mach_sched_init = hw_timer_init;
-
-	/* Only support the external interrupts on their primary level */
-	mcf_mapirq2imr(25, MCFINTC_EINT1);
-	mcf_mapirq2imr(27, MCFINTC_EINT3);
-	mcf_mapirq2imr(29, MCFINTC_EINT5);
-	mcf_mapirq2imr(31, MCFINTC_EINT7);
-
-#ifdef CONFIG_BDM_DISABLE
-	/*
-	 * Disable the BDM clocking.  This also turns off most of the rest of
-	 * the BDM device.  This is good for EMC reasons. This option is not
-	 * incompatible with the memory protection option.
-	 */
-	wdebug(MCFDEBUG_CSR, MCFDEBUG_CSR_PSTCLK);
-#endif
-}
-
-/***************************************************************************/
diff --git a/ANDROID_3.4.5/arch/m68k/platform/5307/gpio.c b/ANDROID_3.4.5/arch/m68k/platform/5307/gpio.c
deleted file mode 100644
index 5850612b..00000000
--- a/ANDROID_3.4.5/arch/m68k/platform/5307/gpio.c
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * Coldfire generic GPIO support
- *
- * (C) Copyright 2009, Steven King <sfking@fdwdc.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
-*/
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-#include <asm/coldfire.h>
-#include <asm/mcfsim.h>
-#include <asm/mcfgpio.h>
-
-static struct mcf_gpio_chip mcf_gpio_chips[] = {
-	{
-		.gpio_chip			= {
-			.label			= "PP",
-			.request		= mcf_gpio_request,
-			.free			= mcf_gpio_free,
-			.direction_input	= mcf_gpio_direction_input,
-			.direction_output	= mcf_gpio_direction_output,
-			.get			= mcf_gpio_get_value,
-			.set			= mcf_gpio_set_value,
-			.ngpio			= 16,
-		},
-		.pddr				= (void __iomem *) MCFSIM_PADDR,
-		.podr				= (void __iomem *) MCFSIM_PADAT,
-		.ppdr				= (void __iomem *) MCFSIM_PADAT,
-	},
-};
-
-static int __init mcf_gpio_init(void)
-{
-	unsigned i = 0;
-	while (i < ARRAY_SIZE(mcf_gpio_chips))
-		(void)gpiochip_add((struct gpio_chip *)&mcf_gpio_chips[i++]);
-	return 0;
-}
-
-core_initcall(mcf_gpio_init);
diff --git a/ANDROID_3.4.5/arch/m68k/platform/5307/nettel.c b/ANDROID_3.4.5/arch/m68k/platform/5307/nettel.c
deleted file mode 100644
index e925ea46..00000000
--- a/ANDROID_3.4.5/arch/m68k/platform/5307/nettel.c
+++ /dev/null
@@ -1,153 +0,0 @@
-/***************************************************************************/
-
-/*
- *	nettel.c -- startup code support for the NETtel boards
- *
- *	Copyright (C) 2009, Greg Ungerer (gerg@snapgear.com)
- */
-
-/***************************************************************************/
-
-#include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/platform_device.h>
-#include <asm/coldfire.h>
-#include <asm/mcfsim.h>
-#include <asm/nettel.h>
-
-/***************************************************************************/
-
-/*
- * Define the IO and interrupt resources of the 2 SMC9196 interfaces.
- */
-#define	NETTEL_SMC0_ADDR	0x30600300
-#define	NETTEL_SMC0_IRQ		29
-
-#define	NETTEL_SMC1_ADDR	0x30600000
-#define	NETTEL_SMC1_IRQ		27
-
-/*
- * We need some access into the SMC9196 registers. Define those registers
- * we will need here (including the smc91x.h doesn't seem to give us these
- * in a simple form).
- */
-#define	SMC91xx_BANKSELECT	14
-#define	SMC91xx_BASEADDR	2
-#define	SMC91xx_BASEMAC		4
-
-/***************************************************************************/
-
-static struct resource nettel_smc91x_0_resources[] = {
-	{
-		.start		= NETTEL_SMC0_ADDR,
-		.end		= NETTEL_SMC0_ADDR + 0x20,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= NETTEL_SMC0_IRQ,
-		.end		= NETTEL_SMC0_IRQ,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct resource nettel_smc91x_1_resources[] = {
-	{
-		.start		= NETTEL_SMC1_ADDR,
-		.end		= NETTEL_SMC1_ADDR + 0x20,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= NETTEL_SMC1_IRQ,
-		.end		= NETTEL_SMC1_IRQ,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device nettel_smc91x[] = {
-	{
-		.name			= "smc91x",
-		.id			= 0,
-		.num_resources		= ARRAY_SIZE(nettel_smc91x_0_resources),
-		.resource		= nettel_smc91x_0_resources,
-	},
-	{
-		.name			= "smc91x",
-		.id			= 1,
-		.num_resources		= ARRAY_SIZE(nettel_smc91x_1_resources),
-		.resource		= nettel_smc91x_1_resources,
-	},
-};
-
-static struct platform_device *nettel_devices[] __initdata = {
-	&nettel_smc91x[0],
-	&nettel_smc91x[1],
-};
-
-/***************************************************************************/
-
-static u8 nettel_macdefault[] __initdata = {
-	0x00, 0xd0, 0xcf, 0x00, 0x00, 0x01,
-};
-
-/*
- * Set flash contained MAC address into SMC9196 core. Make sure the flash
- * MAC address is sane, and not an empty flash. If no good use the Moreton
- * Bay default MAC address instead.
- */
-
-static void __init nettel_smc91x_setmac(unsigned int ioaddr, unsigned int flashaddr)
-{
-	u16 *macp;
-
-	macp = (u16 *) flashaddr;
-	if ((macp[0] == 0xffff) && (macp[1] == 0xffff) && (macp[2] == 0xffff))
-		macp = (u16 *) &nettel_macdefault[0];
-
-	writew(1, NETTEL_SMC0_ADDR + SMC91xx_BANKSELECT);
-	writew(macp[0], ioaddr + SMC91xx_BASEMAC);
-	writew(macp[1], ioaddr + SMC91xx_BASEMAC + 2);
-	writew(macp[2], ioaddr + SMC91xx_BASEMAC + 4);
-}
-
-/***************************************************************************/
-
-/*
- * Re-map the address space of at least one of the SMC ethernet
- * parts. Both parts power up decoding the same address, so we
- * need to move one of them first, before doing anything else.
- */
-
-static void __init nettel_smc91x_init(void)
-{
-	writew(0x00ec, MCF_MBAR + MCFSIM_PADDR);
-	mcf_setppdata(0, 0x0080);
-	writew(1, NETTEL_SMC0_ADDR + SMC91xx_BANKSELECT);
-	writew(0x0067, NETTEL_SMC0_ADDR + SMC91xx_BASEADDR);
-	mcf_setppdata(0x0080, 0);
-
-	/* Set correct chip select timing for SMC9196 accesses */
-	writew(0x1180, MCF_MBAR + MCFSIM_CSCR3);
-
-	/* Set the SMC interrupts to be auto-vectored */
-	mcf_autovector(NETTEL_SMC0_IRQ);
-	mcf_autovector(NETTEL_SMC1_IRQ);
-
-	/* Set MAC addresses from flash for both interfaces */
-	nettel_smc91x_setmac(NETTEL_SMC0_ADDR, 0xf0006000);
-	nettel_smc91x_setmac(NETTEL_SMC1_ADDR, 0xf0006006);
-}
-
-/***************************************************************************/
-
-static int __init init_nettel(void)
-{
-	nettel_smc91x_init();
-	platform_add_devices(nettel_devices, ARRAY_SIZE(nettel_devices));
-	return 0;
-}
-
-arch_initcall(init_nettel);
-
-/***************************************************************************/
diff --git a/ANDROID_3.4.5/arch/m68k/platform/532x/Makefile b/ANDROID_3.4.5/arch/m68k/platform/532x/Makefile
deleted file mode 100644
index ce016693..00000000
--- a/ANDROID_3.4.5/arch/m68k/platform/532x/Makefile
+++ /dev/null
@@ -1,18 +0,0 @@
-#
-# Makefile for the m68knommu linux kernel.
-#
-
-#
-# If you want to play with the HW breakpoints then you will
-# need to add define this,  which will give you a stack backtrace
-# on the console port whenever a DBG interrupt occurs. You have to
-# set up you HW breakpoints to trigger a DBG interrupt:
-#
-# ccflags-y := -DTRAP_DBG_INTERRUPT
-# asflags-y := -DTRAP_DBG_INTERRUPT
-#
-
-asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
-
-#obj-y := config.o usb-mcf532x.o spi-mcf532x.o
-obj-y := config.o gpio.o
diff --git a/ANDROID_3.4.5/arch/m68k/platform/532x/config.c b/ANDROID_3.4.5/arch/m68k/platform/532x/config.c
deleted file mode 100644
index 37082d02..00000000
--- a/ANDROID_3.4.5/arch/m68k/platform/532x/config.c
+++ /dev/null
@@ -1,451 +0,0 @@
-/***************************************************************************/
-
-/*
- *	linux/arch/m68knommu/platform/532x/config.c
- *
- *	Copyright (C) 1999-2002, Greg Ungerer (gerg@snapgear.com)
- *	Copyright (C) 2000, Lineo (www.lineo.com)
- *	Yaroslav Vinogradov yaroslav.vinogradov@freescale.com
- *	Copyright Freescale Semiconductor, Inc 2006
- *	Copyright (c) 2006, emlix, Sebastian Hess <sh@emlix.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-/***************************************************************************/
-
-#include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <asm/machdep.h>
-#include <asm/coldfire.h>
-#include <asm/mcfsim.h>
-#include <asm/mcfuart.h>
-#include <asm/mcfdma.h>
-#include <asm/mcfwdebug.h>
-
-/***************************************************************************/
-
-#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
-
-static void __init m532x_qspi_init(void)
-{
-	/* setup QSPS pins for QSPI with gpio CS control */
-	writew(0x01f0, MCF_GPIO_PAR_QSPI);
-}
-
-#endif /* IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) */
-
-/***************************************************************************/
-
-static void __init m532x_uarts_init(void)
-{
-	/* UART GPIO initialization */
-	MCF_GPIO_PAR_UART |= 0x0FFF;
-}
-
-/***************************************************************************/
-
-static void __init m532x_fec_init(void)
-{
-	/* Set multi-function pins to ethernet mode for fec0 */
-	MCF_GPIO_PAR_FECI2C |= (MCF_GPIO_PAR_FECI2C_PAR_MDC_EMDC |
-		MCF_GPIO_PAR_FECI2C_PAR_MDIO_EMDIO);
-	MCF_GPIO_PAR_FEC = (MCF_GPIO_PAR_FEC_PAR_FEC_7W_FEC |
-		MCF_GPIO_PAR_FEC_PAR_FEC_MII_FEC);
-}
-
-/***************************************************************************/
-
-void __init config_BSP(char *commandp, int size)
-{
-#if !defined(CONFIG_BOOTPARAM)
-	/* Copy command line from FLASH to local buffer... */
-	memcpy(commandp, (char *) 0x4000, 4);
-	if(strncmp(commandp, "kcl ", 4) == 0){
-		memcpy(commandp, (char *) 0x4004, size);
-		commandp[size-1] = 0;
-	} else {
-		memset(commandp, 0, size);
-	}
-#endif
-
-	mach_sched_init = hw_timer_init;
-	m532x_uarts_init();
-	m532x_fec_init();
-#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
-	m532x_qspi_init();
-#endif
-
-#ifdef CONFIG_BDM_DISABLE
-	/*
-	 * Disable the BDM clocking.  This also turns off most of the rest of
-	 * the BDM device.  This is good for EMC reasons. This option is not
-	 * incompatible with the memory protection option.
-	 */
-	wdebug(MCFDEBUG_CSR, MCFDEBUG_CSR_PSTCLK);
-#endif
-}
-
-/***************************************************************************/
-/* Board initialization */
-/***************************************************************************/
-/* 
- * PLL min/max specifications
- */
-#define MAX_FVCO	500000	/* KHz */
-#define MAX_FSYS	80000 	/* KHz */
-#define MIN_FSYS	58333 	/* KHz */
-#define FREF		16000   /* KHz */
-
-
-#define MAX_MFD		135     /* Multiplier */
-#define MIN_MFD		88      /* Multiplier */
-#define BUSDIV		6       /* Divider */
-
-/*
- * Low Power Divider specifications
- */
-#define MIN_LPD		(1 << 0)    /* Divider (not encoded) */
-#define MAX_LPD		(1 << 15)   /* Divider (not encoded) */
-#define DEFAULT_LPD	(1 << 1)	/* Divider (not encoded) */
-
-#define SYS_CLK_KHZ	80000
-#define SYSTEM_PERIOD	12.5
-/*
- *  SDRAM Timing Parameters
- */  
-#define SDRAM_BL	8	/* # of beats in a burst */
-#define SDRAM_TWR	2	/* in clocks */
-#define SDRAM_CASL	2.5	/* CASL in clocks */
-#define SDRAM_TRCD	2	/* in clocks */
-#define SDRAM_TRP	2	/* in clocks */
-#define SDRAM_TRFC	7	/* in clocks */
-#define SDRAM_TREFI	7800	/* in ns */
-
-#define EXT_SRAM_ADDRESS	(0xC0000000)
-#define FLASH_ADDRESS		(0x00000000)
-#define SDRAM_ADDRESS		(0x40000000)
-
-#define NAND_FLASH_ADDRESS	(0xD0000000)
-
-int sys_clk_khz = 0;
-int sys_clk_mhz = 0;
-
-void wtm_init(void);
-void scm_init(void);
-void gpio_init(void);
-void fbcs_init(void);
-void sdramc_init(void);
-int  clock_pll (int fsys, int flags);
-int  clock_limp (int);
-int  clock_exit_limp (void);
-int  get_sys_clock (void);
-
-asmlinkage void __init sysinit(void)
-{
-	sys_clk_khz = clock_pll(0, 0);
-	sys_clk_mhz = sys_clk_khz/1000;
-	
-	wtm_init();
-	scm_init();
-	gpio_init();
-	fbcs_init();
-	sdramc_init();
-}
-
-void wtm_init(void)
-{
-	/* Disable watchdog timer */
-	MCF_WTM_WCR = 0;
-}
-
-#define MCF_SCM_BCR_GBW		(0x00000100)
-#define MCF_SCM_BCR_GBR		(0x00000200)
-
-void scm_init(void)
-{
-	/* All masters are trusted */
-	MCF_SCM_MPR = 0x77777777;
-    
-	/* Allow supervisor/user, read/write, and trusted/untrusted
-	   access to all slaves */
-	MCF_SCM_PACRA = 0;
-	MCF_SCM_PACRB = 0;
-	MCF_SCM_PACRC = 0;
-	MCF_SCM_PACRD = 0;
-	MCF_SCM_PACRE = 0;
-	MCF_SCM_PACRF = 0;
-
-	/* Enable bursts */
-	MCF_SCM_BCR = (MCF_SCM_BCR_GBR | MCF_SCM_BCR_GBW);
-}
-
-
-void fbcs_init(void)
-{
-	MCF_GPIO_PAR_CS = 0x0000003E;
-
-	/* Latch chip select */
-	MCF_FBCS1_CSAR = 0x10080000;
-
-	MCF_FBCS1_CSCR = 0x002A3780;
-	MCF_FBCS1_CSMR = (MCF_FBCS_CSMR_BAM_2M | MCF_FBCS_CSMR_V);
-
-	/* Initialize latch to drive signals to inactive states */
-	*((u16 *)(0x10080000)) = 0xFFFF;
-
-	/* External SRAM */
-	MCF_FBCS1_CSAR = EXT_SRAM_ADDRESS;
-	MCF_FBCS1_CSCR = (MCF_FBCS_CSCR_PS_16
-			| MCF_FBCS_CSCR_AA
-			| MCF_FBCS_CSCR_SBM
-			| MCF_FBCS_CSCR_WS(1));
-	MCF_FBCS1_CSMR = (MCF_FBCS_CSMR_BAM_512K
-			| MCF_FBCS_CSMR_V);
-
-	/* Boot Flash connected to FBCS0 */
-	MCF_FBCS0_CSAR = FLASH_ADDRESS;
-	MCF_FBCS0_CSCR = (MCF_FBCS_CSCR_PS_16
-			| MCF_FBCS_CSCR_BEM
-			| MCF_FBCS_CSCR_AA
-			| MCF_FBCS_CSCR_SBM
-			| MCF_FBCS_CSCR_WS(7));
-	MCF_FBCS0_CSMR = (MCF_FBCS_CSMR_BAM_32M
-			| MCF_FBCS_CSMR_V);
-}
-
-void sdramc_init(void)
-{
-	/*
-	 * Check to see if the SDRAM has already been initialized
-	 * by a run control tool
-	 */
-	if (!(MCF_SDRAMC_SDCR & MCF_SDRAMC_SDCR_REF)) {
-		/* SDRAM chip select initialization */
-		
-		/* Initialize SDRAM chip select */
-		MCF_SDRAMC_SDCS0 = (0
-			| MCF_SDRAMC_SDCS_BA(SDRAM_ADDRESS)
-			| MCF_SDRAMC_SDCS_CSSZ(MCF_SDRAMC_SDCS_CSSZ_32MBYTE));
-
-	/*
-	 * Basic configuration and initialization
-	 */
-	MCF_SDRAMC_SDCFG1 = (0
-		| MCF_SDRAMC_SDCFG1_SRD2RW((int)((SDRAM_CASL + 2) + 0.5 ))
-		| MCF_SDRAMC_SDCFG1_SWT2RD(SDRAM_TWR + 1)
-		| MCF_SDRAMC_SDCFG1_RDLAT((int)((SDRAM_CASL*2) + 2))
-		| MCF_SDRAMC_SDCFG1_ACT2RW((int)((SDRAM_TRCD ) + 0.5))
-		| MCF_SDRAMC_SDCFG1_PRE2ACT((int)((SDRAM_TRP ) + 0.5))
-		| MCF_SDRAMC_SDCFG1_REF2ACT((int)(((SDRAM_TRFC) ) + 0.5))
-		| MCF_SDRAMC_SDCFG1_WTLAT(3));
-	MCF_SDRAMC_SDCFG2 = (0
-		| MCF_SDRAMC_SDCFG2_BRD2PRE(SDRAM_BL/2 + 1)
-		| MCF_SDRAMC_SDCFG2_BWT2RW(SDRAM_BL/2 + SDRAM_TWR)
-		| MCF_SDRAMC_SDCFG2_BRD2WT((int)((SDRAM_CASL+SDRAM_BL/2-1.0)+0.5))
-		| MCF_SDRAMC_SDCFG2_BL(SDRAM_BL-1));
-
-            
-	/*
-	 * Precharge and enable write to SDMR
-	 */
-        MCF_SDRAMC_SDCR = (0
-		| MCF_SDRAMC_SDCR_MODE_EN
-		| MCF_SDRAMC_SDCR_CKE
-		| MCF_SDRAMC_SDCR_DDR
-		| MCF_SDRAMC_SDCR_MUX(1)
-		| MCF_SDRAMC_SDCR_RCNT((int)(((SDRAM_TREFI/(SYSTEM_PERIOD*64)) - 1) + 0.5))
-		| MCF_SDRAMC_SDCR_PS_16
-		| MCF_SDRAMC_SDCR_IPALL);            
-
-	/*
-	 * Write extended mode register
-	 */
-	MCF_SDRAMC_SDMR = (0
-		| MCF_SDRAMC_SDMR_BNKAD_LEMR
-		| MCF_SDRAMC_SDMR_AD(0x0)
-		| MCF_SDRAMC_SDMR_CMD);
-
-	/*
-	 * Write mode register and reset DLL
-	 */
-	MCF_SDRAMC_SDMR = (0
-		| MCF_SDRAMC_SDMR_BNKAD_LMR
-		| MCF_SDRAMC_SDMR_AD(0x163)
-		| MCF_SDRAMC_SDMR_CMD);
-
-	/*
-	 * Execute a PALL command
-	 */
-	MCF_SDRAMC_SDCR |= MCF_SDRAMC_SDCR_IPALL;
-
-	/*
-	 * Perform two REF cycles
-	 */
-	MCF_SDRAMC_SDCR |= MCF_SDRAMC_SDCR_IREF;
-	MCF_SDRAMC_SDCR |= MCF_SDRAMC_SDCR_IREF;
-
-	/*
-	 * Write mode register and clear reset DLL
-	 */
-	MCF_SDRAMC_SDMR = (0
-		| MCF_SDRAMC_SDMR_BNKAD_LMR
-		| MCF_SDRAMC_SDMR_AD(0x063)
-		| MCF_SDRAMC_SDMR_CMD);
-				
-	/*
-	 * Enable auto refresh and lock SDMR
-	 */
-	MCF_SDRAMC_SDCR &= ~MCF_SDRAMC_SDCR_MODE_EN;
-	MCF_SDRAMC_SDCR |= (0
-		| MCF_SDRAMC_SDCR_REF
-		| MCF_SDRAMC_SDCR_DQS_OE(0xC));
-	}
-}
-
-void gpio_init(void)
-{
-	/* Enable UART0 pins */
-	MCF_GPIO_PAR_UART = ( 0
-		| MCF_GPIO_PAR_UART_PAR_URXD0
-		| MCF_GPIO_PAR_UART_PAR_UTXD0);
-
-	/* Initialize TIN3 as a GPIO output to enable the write
-	   half of the latch */
-	MCF_GPIO_PAR_TIMER = 0x00;
-	__raw_writeb(0x08, MCFGPIO_PDDR_TIMER);
-	__raw_writeb(0x00, MCFGPIO_PCLRR_TIMER);
-
-}
-
-int clock_pll(int fsys, int flags)
-{
-	int fref, temp, fout, mfd;
-	u32 i;
-
-	fref = FREF;
-        
-	if (fsys == 0) {
-		/* Return current PLL output */
-		mfd = MCF_PLL_PFDR;
-
-		return (fref * mfd / (BUSDIV * 4));
-	}
-
-	/* Check bounds of requested system clock */
-	if (fsys > MAX_FSYS)
-		fsys = MAX_FSYS;
-	if (fsys < MIN_FSYS)
-		fsys = MIN_FSYS;
-
-	/* Multiplying by 100 when calculating the temp value,
-	   and then dividing by 100 to calculate the mfd allows
-	   for exact values without needing to include floating
-	   point libraries. */
-	temp = 100 * fsys / fref;
-	mfd = 4 * BUSDIV * temp / 100;
-    	    	    	
-	/* Determine the output frequency for selected values */
-	fout = (fref * mfd / (BUSDIV * 4));
-
-	/*
-	 * Check to see if the SDRAM has already been initialized.
-	 * If it has then the SDRAM needs to be put into self refresh
-	 * mode before reprogramming the PLL.
-	 */
-	if (MCF_SDRAMC_SDCR & MCF_SDRAMC_SDCR_REF)
-		/* Put SDRAM into self refresh mode */
-		MCF_SDRAMC_SDCR &= ~MCF_SDRAMC_SDCR_CKE;
-
-	/*
-	 * Initialize the PLL to generate the new system clock frequency.
-	 * The device must be put into LIMP mode to reprogram the PLL.
-	 */
-
-	/* Enter LIMP mode */
-	clock_limp(DEFAULT_LPD);
-     					
-	/* Reprogram PLL for desired fsys */
-	MCF_PLL_PODR = (0
-		| MCF_PLL_PODR_CPUDIV(BUSDIV/3)
-		| MCF_PLL_PODR_BUSDIV(BUSDIV));
-						
-	MCF_PLL_PFDR = mfd;
-		
-	/* Exit LIMP mode */
-	clock_exit_limp();
-	
-	/*
-	 * Return the SDRAM to normal operation if it is in use.
-	 */
-	if (MCF_SDRAMC_SDCR & MCF_SDRAMC_SDCR_REF)
-		/* Exit self refresh mode */
-		MCF_SDRAMC_SDCR |= MCF_SDRAMC_SDCR_CKE;
-
-	/* Errata - workaround for SDRAM opeartion after exiting LIMP mode */
-	MCF_SDRAMC_LIMP_FIX = MCF_SDRAMC_REFRESH;
-
-	/* wait for DQS logic to relock */
-	for (i = 0; i < 0x200; i++)
-		;
-
-	return fout;
-}
-
-int clock_limp(int div)
-{
-	u32 temp;
-
-	/* Check bounds of divider */
-	if (div < MIN_LPD)
-		div = MIN_LPD;
-	if (div > MAX_LPD)
-		div = MAX_LPD;
-    
-	/* Save of the current value of the SSIDIV so we don't
-	   overwrite the value*/
-	temp = (MCF_CCM_CDR & MCF_CCM_CDR_SSIDIV(0xF));
-      
-	/* Apply the divider to the system clock */
-	MCF_CCM_CDR = ( 0
-		| MCF_CCM_CDR_LPDIV(div)
-		| MCF_CCM_CDR_SSIDIV(temp));
-    
-	MCF_CCM_MISCCR |= MCF_CCM_MISCCR_LIMP;
-    
-	return (FREF/(3*(1 << div)));
-}
-
-int clock_exit_limp(void)
-{
-	int fout;
-	
-	/* Exit LIMP mode */
-	MCF_CCM_MISCCR = (MCF_CCM_MISCCR & ~ MCF_CCM_MISCCR_LIMP);
-
-	/* Wait for PLL to lock */
-	while (!(MCF_CCM_MISCCR & MCF_CCM_MISCCR_PLL_LOCK))
-		;
-	
-	fout = get_sys_clock();
-
-	return fout;
-}
-
-int get_sys_clock(void)
-{
-	int divider;
-	
-	/* Test to see if device is in LIMP mode */
-	if (MCF_CCM_MISCCR & MCF_CCM_MISCCR_LIMP) {
-		divider = MCF_CCM_CDR & MCF_CCM_CDR_LPDIV(0xF);
-		return (FREF/(2 << divider));
-	}
-	else
-		return ((FREF * MCF_PLL_PFDR) / (BUSDIV * 4));
-}
diff --git a/ANDROID_3.4.5/arch/m68k/platform/532x/gpio.c b/ANDROID_3.4.5/arch/m68k/platform/532x/gpio.c
deleted file mode 100644
index 212a85de..00000000
--- a/ANDROID_3.4.5/arch/m68k/platform/532x/gpio.c
+++ /dev/null
@@ -1,337 +0,0 @@
-/*
- * Coldfire generic GPIO support
- *
- * (C) Copyright 2009, Steven King <sfking@fdwdc.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
-*/
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-#include <asm/coldfire.h>
-#include <asm/mcfsim.h>
-#include <asm/mcfgpio.h>
-
-static struct mcf_gpio_chip mcf_gpio_chips[] = {
-	{
-		.gpio_chip			= {
-			.label			= "PIRQ",
-			.request		= mcf_gpio_request,
-			.free			= mcf_gpio_free,
-			.direction_input	= mcf_gpio_direction_input,
-			.direction_output	= mcf_gpio_direction_output,
-			.get			= mcf_gpio_get_value,
-			.set			= mcf_gpio_set_value,
-			.ngpio			= 8,
-		},
-		.pddr				= (void __iomem *) MCFEPORT_EPDDR,
-		.podr				= (void __iomem *) MCFEPORT_EPDR,
-		.ppdr				= (void __iomem *) MCFEPORT_EPPDR,
-	},
-	{
-		.gpio_chip			= {
-			.label			= "FECH",
-			.request		= mcf_gpio_request,
-			.free			= mcf_gpio_free,
-			.direction_input	= mcf_gpio_direction_input,
-			.direction_output	= mcf_gpio_direction_output,
-			.get			= mcf_gpio_get_value,
-			.set			= mcf_gpio_set_value_fast,
-			.base			= 8,
-			.ngpio			= 8,
-		},
-		.pddr				= (void __iomem *) MCFGPIO_PDDR_FECH,
-		.podr				= (void __iomem *) MCFGPIO_PODR_FECH,
-		.ppdr				= (void __iomem *) MCFGPIO_PPDSDR_FECH,
-		.setr				= (void __iomem *) MCFGPIO_PPDSDR_FECH,
-		.clrr				= (void __iomem *) MCFGPIO_PCLRR_FECH,
-	},
-	{
-		.gpio_chip			= {
-			.label			= "FECL",
-			.request		= mcf_gpio_request,
-			.free			= mcf_gpio_free,
-			.direction_input	= mcf_gpio_direction_input,
-			.direction_output	= mcf_gpio_direction_output,
-			.get			= mcf_gpio_get_value,
-			.set			= mcf_gpio_set_value_fast,
-			.base			= 16,
-			.ngpio			= 8,
-		},
-		.pddr				= (void __iomem *) MCFGPIO_PDDR_FECL,
-		.podr				= (void __iomem *) MCFGPIO_PODR_FECL,
-		.ppdr				= (void __iomem *) MCFGPIO_PPDSDR_FECL,
-		.setr				= (void __iomem *) MCFGPIO_PPDSDR_FECL,
-		.clrr				= (void __iomem *) MCFGPIO_PCLRR_FECL,
-	},
-	{
-		.gpio_chip			= {
-			.label			= "SSI",
-			.request		= mcf_gpio_request,
-			.free			= mcf_gpio_free,
-			.direction_input	= mcf_gpio_direction_input,
-			.direction_output	= mcf_gpio_direction_output,
-			.get			= mcf_gpio_get_value,
-			.set			= mcf_gpio_set_value_fast,
-			.base			= 24,
-			.ngpio			= 5,
-		},
-		.pddr				= (void __iomem *) MCFGPIO_PDDR_SSI,
-		.podr				= (void __iomem *) MCFGPIO_PODR_SSI,
-		.ppdr				= (void __iomem *) MCFGPIO_PPDSDR_SSI,
-		.setr				= (void __iomem *) MCFGPIO_PPDSDR_SSI,
-		.clrr				= (void __iomem *) MCFGPIO_PCLRR_SSI,
-	},
-	{
-		.gpio_chip			= {
-			.label			= "BUSCTL",
-			.request		= mcf_gpio_request,
-			.free			= mcf_gpio_free,
-			.direction_input	= mcf_gpio_direction_input,
-			.direction_output	= mcf_gpio_direction_output,
-			.get			= mcf_gpio_get_value,
-			.set			= mcf_gpio_set_value_fast,
-			.base			= 32,
-			.ngpio			= 4,
-		},
-		.pddr				= (void __iomem *) MCFGPIO_PDDR_BUSCTL,
-		.podr				= (void __iomem *) MCFGPIO_PODR_BUSCTL,
-		.ppdr				= (void __iomem *) MCFGPIO_PPDSDR_BUSCTL,
-		.setr				= (void __iomem *) MCFGPIO_PPDSDR_BUSCTL,
-		.clrr				= (void __iomem *) MCFGPIO_PCLRR_BUSCTL,
-	},
-	{
-		.gpio_chip			= {
-			.label			= "BE",
-			.request		= mcf_gpio_request,
-			.free			= mcf_gpio_free,
-			.direction_input	= mcf_gpio_direction_input,
-			.direction_output	= mcf_gpio_direction_output,
-			.get			= mcf_gpio_get_value,
-			.set			= mcf_gpio_set_value_fast,
-			.base			= 40,
-			.ngpio			= 4,
-		},
-		.pddr				= (void __iomem *) MCFGPIO_PDDR_BE,
-		.podr				= (void __iomem *) MCFGPIO_PODR_BE,
-		.ppdr				= (void __iomem *) MCFGPIO_PPDSDR_BE,
-		.setr				= (void __iomem *) MCFGPIO_PPDSDR_BE,
-		.clrr				= (void __iomem *) MCFGPIO_PCLRR_BE,
-	},
-	{
-		.gpio_chip			= {
-			.label			= "CS",
-			.request		= mcf_gpio_request,
-			.free			= mcf_gpio_free,
-			.direction_input	= mcf_gpio_direction_input,
-			.direction_output	= mcf_gpio_direction_output,
-			.get			= mcf_gpio_get_value,
-			.set			= mcf_gpio_set_value_fast,
-			.base			= 49,
-			.ngpio			= 5,
-		},
-		.pddr				= (void __iomem *) MCFGPIO_PDDR_CS,
-		.podr				= (void __iomem *) MCFGPIO_PODR_CS,
-		.ppdr				= (void __iomem *) MCFGPIO_PPDSDR_CS,
-		.setr				= (void __iomem *) MCFGPIO_PPDSDR_CS,
-		.clrr				= (void __iomem *) MCFGPIO_PCLRR_CS,
-	},
-	{
-		.gpio_chip			= {
-			.label			= "PWM",
-			.request		= mcf_gpio_request,
-			.free			= mcf_gpio_free,
-			.direction_input	= mcf_gpio_direction_input,
-			.direction_output	= mcf_gpio_direction_output,
-			.get			= mcf_gpio_get_value,
-			.set			= mcf_gpio_set_value_fast,
-			.base			= 58,
-			.ngpio			= 4,
-		},
-		.pddr				= (void __iomem *) MCFGPIO_PDDR_PWM,
-		.podr				= (void __iomem *) MCFGPIO_PODR_PWM,
-		.ppdr				= (void __iomem *) MCFGPIO_PPDSDR_PWM,
-		.setr				= (void __iomem *) MCFGPIO_PPDSDR_PWM,
-		.clrr				= (void __iomem *) MCFGPIO_PCLRR_PWM,
-	},
-	{
-		.gpio_chip			= {
-			.label			= "FECI2C",
-			.request		= mcf_gpio_request,
-			.free			= mcf_gpio_free,
-			.direction_input	= mcf_gpio_direction_input,
-			.direction_output	= mcf_gpio_direction_output,
-			.get			= mcf_gpio_get_value,
-			.set			= mcf_gpio_set_value_fast,
-			.base			= 64,
-			.ngpio			= 4,
-		},
-		.pddr				= (void __iomem *) MCFGPIO_PDDR_FECI2C,
-		.podr				= (void __iomem *) MCFGPIO_PODR_FECI2C,
-		.ppdr				= (void __iomem *) MCFGPIO_PPDSDR_FECI2C,
-		.setr				= (void __iomem *) MCFGPIO_PPDSDR_FECI2C,
-		.clrr				= (void __iomem *) MCFGPIO_PCLRR_FECI2C,
-	},
-	{
-		.gpio_chip			= {
-			.label			= "UART",
-			.request		= mcf_gpio_request,
-			.free			= mcf_gpio_free,
-			.direction_input	= mcf_gpio_direction_input,
-			.direction_output	= mcf_gpio_direction_output,
-			.get			= mcf_gpio_get_value,
-			.set			= mcf_gpio_set_value_fast,
-			.base			= 72,
-			.ngpio			= 8,
-		},
-		.pddr				= (void __iomem *) MCFGPIO_PDDR_UART,
-		.podr				= (void __iomem *) MCFGPIO_PODR_UART,
-		.ppdr				= (void __iomem *) MCFGPIO_PPDSDR_UART,
-		.setr				= (void __iomem *) MCFGPIO_PPDSDR_UART,
-		.clrr				= (void __iomem *) MCFGPIO_PCLRR_UART,
-	},
-	{
-		.gpio_chip			= {
-			.label			= "QSPI",
-			.request		= mcf_gpio_request,
-			.free			= mcf_gpio_free,
-			.direction_input	= mcf_gpio_direction_input,
-			.direction_output	= mcf_gpio_direction_output,
-			.get			= mcf_gpio_get_value,
-			.set			= mcf_gpio_set_value_fast,
-			.base			= 80,
-			.ngpio			= 6,
-		},
-		.pddr				= (void __iomem *) MCFGPIO_PDDR_QSPI,
-		.podr				= (void __iomem *) MCFGPIO_PODR_QSPI,
-		.ppdr				= (void __iomem *) MCFGPIO_PPDSDR_QSPI,
-		.setr				= (void __iomem *) MCFGPIO_PPDSDR_QSPI,
-		.clrr				= (void __iomem *) MCFGPIO_PCLRR_QSPI,
-	},
-	{
-		.gpio_chip			= {
-			.label			= "TIMER",
-			.request		= mcf_gpio_request,
-			.free			= mcf_gpio_free,
-			.direction_input	= mcf_gpio_direction_input,
-			.direction_output	= mcf_gpio_direction_output,
-			.get			= mcf_gpio_get_value,
-			.set			= mcf_gpio_set_value_fast,
-			.base			= 88,
-			.ngpio			= 4,
-		},
-		.pddr				= (void __iomem *) MCFGPIO_PDDR_TIMER,
-		.podr				= (void __iomem *) MCFGPIO_PODR_TIMER,
-		.ppdr				= (void __iomem *) MCFGPIO_PPDSDR_TIMER,
-		.setr				= (void __iomem *) MCFGPIO_PPDSDR_TIMER,
-		.clrr				= (void __iomem *) MCFGPIO_PCLRR_TIMER,
-	},
-	{
-		.gpio_chip			= {
-			.label			= "LCDDATAH",
-			.request		= mcf_gpio_request,
-			.free			= mcf_gpio_free,
-			.direction_input	= mcf_gpio_direction_input,
-			.direction_output	= mcf_gpio_direction_output,
-			.get			= mcf_gpio_get_value,
-			.set			= mcf_gpio_set_value_fast,
-			.base			= 96,
-			.ngpio			= 2,
-		},
-		.pddr				= (void __iomem *) MCFGPIO_PDDR_LCDDATAH,
-		.podr				= (void __iomem *) MCFGPIO_PODR_LCDDATAH,
-		.ppdr				= (void __iomem *) MCFGPIO_PPDSDR_LCDDATAH,
-		.setr				= (void __iomem *) MCFGPIO_PPDSDR_LCDDATAH,
-		.clrr				= (void __iomem *) MCFGPIO_PCLRR_LCDDATAH,
-	},
-	{
-		.gpio_chip			= {
-			.label			= "LCDDATAM",
-			.request		= mcf_gpio_request,
-			.free			= mcf_gpio_free,
-			.direction_input	= mcf_gpio_direction_input,
-			.direction_output	= mcf_gpio_direction_output,
-			.get			= mcf_gpio_get_value,
-			.set			= mcf_gpio_set_value_fast,
-			.base			= 104,
-			.ngpio			= 8,
-		},
-		.pddr				= (void __iomem *) MCFGPIO_PDDR_LCDDATAM,
-		.podr				= (void __iomem *) MCFGPIO_PODR_LCDDATAM,
-		.ppdr				= (void __iomem *) MCFGPIO_PPDSDR_LCDDATAM,
-		.setr				= (void __iomem *) MCFGPIO_PPDSDR_LCDDATAM,
-		.clrr				= (void __iomem *) MCFGPIO_PCLRR_LCDDATAM,
-	},
-	{
-		.gpio_chip			= {
-			.label			= "LCDDATAL",
-			.request		= mcf_gpio_request,
-			.free			= mcf_gpio_free,
-			.direction_input	= mcf_gpio_direction_input,
-			.direction_output	= mcf_gpio_direction_output,
-			.get			= mcf_gpio_get_value,
-			.set			= mcf_gpio_set_value_fast,
-			.base			= 112,
-			.ngpio			= 8,
-		},
-		.pddr				= (void __iomem *) MCFGPIO_PDDR_LCDDATAL,
-		.podr				= (void __iomem *) MCFGPIO_PODR_LCDDATAL,
-		.ppdr				= (void __iomem *) MCFGPIO_PPDSDR_LCDDATAL,
-		.setr				= (void __iomem *) MCFGPIO_PPDSDR_LCDDATAL,
-		.clrr				= (void __iomem *) MCFGPIO_PCLRR_LCDDATAL,
-	},
-	{
-		.gpio_chip			= {
-			.label			= "LCDCTLH",
-			.request		= mcf_gpio_request,
-			.free			= mcf_gpio_free,
-			.direction_input	= mcf_gpio_direction_input,
-			.direction_output	= mcf_gpio_direction_output,
-			.get			= mcf_gpio_get_value,
-			.set			= mcf_gpio_set_value_fast,
-			.base			= 120,
-			.ngpio			= 1,
-		},
-		.pddr				= (void __iomem *) MCFGPIO_PDDR_LCDCTLH,
-		.podr				= (void __iomem *) MCFGPIO_PODR_LCDCTLH,
-		.ppdr				= (void __iomem *) MCFGPIO_PPDSDR_LCDCTLH,
-		.setr				= (void __iomem *) MCFGPIO_PPDSDR_LCDCTLH,
-		.clrr				= (void __iomem *) MCFGPIO_PCLRR_LCDCTLH,
-	},
-	{
-		.gpio_chip			= {
-			.label			= "LCDCTLL",
-			.request		= mcf_gpio_request,
-			.free			= mcf_gpio_free,
-			.direction_input	= mcf_gpio_direction_input,
-			.direction_output	= mcf_gpio_direction_output,
-			.get			= mcf_gpio_get_value,
-			.set			= mcf_gpio_set_value_fast,
-			.base			= 128,
-			.ngpio			= 8,
-		},
-		.pddr				= (void __iomem *) MCFGPIO_PDDR_LCDCTLL,
-		.podr				= (void __iomem *) MCFGPIO_PODR_LCDCTLL,
-		.ppdr				= (void __iomem *) MCFGPIO_PPDSDR_LCDCTLL,
-		.setr				= (void __iomem *) MCFGPIO_PPDSDR_LCDCTLL,
-		.clrr				= (void __iomem *) MCFGPIO_PCLRR_LCDCTLL,
-	},
-};
-
-static int __init mcf_gpio_init(void)
-{
-	unsigned i = 0;
-	while (i < ARRAY_SIZE(mcf_gpio_chips))
-		(void)gpiochip_add((struct gpio_chip *)&mcf_gpio_chips[i++]);
-	return 0;
-}
-
-core_initcall(mcf_gpio_init);
diff --git a/ANDROID_3.4.5/arch/m68k/platform/5407/Makefile b/ANDROID_3.4.5/arch/m68k/platform/5407/Makefile
deleted file mode 100644
index e83fe148..00000000
--- a/ANDROID_3.4.5/arch/m68k/platform/5407/Makefile
+++ /dev/null
@@ -1,18 +0,0 @@
-#
-# Makefile for the m68knommu linux kernel.
-#
-
-#
-# If you want to play with the HW breakpoints then you will
-# need to add define this,  which will give you a stack backtrace
-# on the console port whenever a DBG interrupt occurs. You have to
-# set up you HW breakpoints to trigger a DBG interrupt:
-#
-# ccflags-y := -DTRAP_DBG_INTERRUPT
-# asflags-y := -DTRAP_DBG_INTERRUPT
-#
-
-asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
-
-obj-y := config.o gpio.o
-
diff --git a/ANDROID_3.4.5/arch/m68k/platform/5407/config.c b/ANDROID_3.4.5/arch/m68k/platform/5407/config.c
deleted file mode 100644
index bb6c746a..00000000
--- a/ANDROID_3.4.5/arch/m68k/platform/5407/config.c
+++ /dev/null
@@ -1,33 +0,0 @@
-/***************************************************************************/
-
-/*
- *	linux/arch/m68knommu/platform/5407/config.c
- *
- *	Copyright (C) 1999-2002, Greg Ungerer (gerg@snapgear.com)
- *	Copyright (C) 2000, Lineo (www.lineo.com)
- */
-
-/***************************************************************************/
-
-#include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <asm/machdep.h>
-#include <asm/coldfire.h>
-#include <asm/mcfsim.h>
-
-/***************************************************************************/
-
-void __init config_BSP(char *commandp, int size)
-{
-	mach_sched_init = hw_timer_init;
-
-	/* Only support the external interrupts on their primary level */
-	mcf_mapirq2imr(25, MCFINTC_EINT1);
-	mcf_mapirq2imr(27, MCFINTC_EINT3);
-	mcf_mapirq2imr(29, MCFINTC_EINT5);
-	mcf_mapirq2imr(31, MCFINTC_EINT7);
-}
-
-/***************************************************************************/
diff --git a/ANDROID_3.4.5/arch/m68k/platform/5407/gpio.c b/ANDROID_3.4.5/arch/m68k/platform/5407/gpio.c
deleted file mode 100644
index 5850612b..00000000
--- a/ANDROID_3.4.5/arch/m68k/platform/5407/gpio.c
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * Coldfire generic GPIO support
- *
- * (C) Copyright 2009, Steven King <sfking@fdwdc.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
-*/
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-#include <asm/coldfire.h>
-#include <asm/mcfsim.h>
-#include <asm/mcfgpio.h>
-
-static struct mcf_gpio_chip mcf_gpio_chips[] = {
-	{
-		.gpio_chip			= {
-			.label			= "PP",
-			.request		= mcf_gpio_request,
-			.free			= mcf_gpio_free,
-			.direction_input	= mcf_gpio_direction_input,
-			.direction_output	= mcf_gpio_direction_output,
-			.get			= mcf_gpio_get_value,
-			.set			= mcf_gpio_set_value,
-			.ngpio			= 16,
-		},
-		.pddr				= (void __iomem *) MCFSIM_PADDR,
-		.podr				= (void __iomem *) MCFSIM_PADAT,
-		.ppdr				= (void __iomem *) MCFSIM_PADAT,
-	},
-};
-
-static int __init mcf_gpio_init(void)
-{
-	unsigned i = 0;
-	while (i < ARRAY_SIZE(mcf_gpio_chips))
-		(void)gpiochip_add((struct gpio_chip *)&mcf_gpio_chips[i++]);
-	return 0;
-}
-
-core_initcall(mcf_gpio_init);
diff --git a/ANDROID_3.4.5/arch/m68k/platform/54xx/Makefile b/ANDROID_3.4.5/arch/m68k/platform/54xx/Makefile
deleted file mode 100644
index 6cfd090e..00000000
--- a/ANDROID_3.4.5/arch/m68k/platform/54xx/Makefile
+++ /dev/null
@@ -1,19 +0,0 @@
-#
-# Makefile for the m68knommu linux kernel.
-#
-
-#
-# If you want to play with the HW breakpoints then you will
-# need to add define this,  which will give you a stack backtrace
-# on the console port whenever a DBG interrupt occurs. You have to
-# set up you HW breakpoints to trigger a DBG interrupt:
-#
-# EXTRA_CFLAGS += -DTRAP_DBG_INTERRUPT
-# EXTRA_AFLAGS += -DTRAP_DBG_INTERRUPT
-#
-
-asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
-
-obj-y := config.o
-obj-$(CONFIG_FIREBEE) += firebee.o
-
diff --git a/ANDROID_3.4.5/arch/m68k/platform/54xx/config.c b/ANDROID_3.4.5/arch/m68k/platform/54xx/config.c
deleted file mode 100644
index 2081c6cb..00000000
--- a/ANDROID_3.4.5/arch/m68k/platform/54xx/config.c
+++ /dev/null
@@ -1,105 +0,0 @@
-/***************************************************************************/
-
-/*
- *	linux/arch/m68knommu/platform/54xx/config.c
- *
- *	Copyright (C) 2010, Philippe De Muyter <phdm@macqel.be>
- */
-
-/***************************************************************************/
-
-#include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/mm.h>
-#include <linux/bootmem.h>
-#include <asm/pgalloc.h>
-#include <asm/machdep.h>
-#include <asm/coldfire.h>
-#include <asm/m54xxsim.h>
-#include <asm/mcfuart.h>
-#include <asm/m54xxgpt.h>
-#ifdef CONFIG_MMU
-#include <asm/mmu_context.h>
-#endif
-
-/***************************************************************************/
-
-static void __init m54xx_uarts_init(void)
-{
-	/* enable io pins */
-	__raw_writeb(MCF_PAR_PSC_TXD | MCF_PAR_PSC_RXD,
-		MCF_MBAR + MCF_PAR_PSC(0));
-	__raw_writeb(MCF_PAR_PSC_TXD | MCF_PAR_PSC_RXD | MCF_PAR_PSC_RTS_RTS,
-		MCF_MBAR + MCF_PAR_PSC(1));
-	__raw_writeb(MCF_PAR_PSC_TXD | MCF_PAR_PSC_RXD | MCF_PAR_PSC_RTS_RTS |
-		MCF_PAR_PSC_CTS_CTS, MCF_MBAR + MCF_PAR_PSC(2));
-	__raw_writeb(MCF_PAR_PSC_TXD | MCF_PAR_PSC_RXD,
-		MCF_MBAR + MCF_PAR_PSC(3));
-}
-
-/***************************************************************************/
-
-static void mcf54xx_reset(void)
-{
-	/* disable interrupts and enable the watchdog */
-	asm("movew #0x2700, %sr\n");
-	__raw_writel(0, MCF_MBAR + MCF_GPT_GMS0);
-	__raw_writel(MCF_GPT_GCIR_CNT(1), MCF_MBAR + MCF_GPT_GCIR0);
-	__raw_writel(MCF_GPT_GMS_WDEN | MCF_GPT_GMS_CE | MCF_GPT_GMS_TMS(4),
-						MCF_MBAR + MCF_GPT_GMS0);
-}
-
-/***************************************************************************/
-
-#ifdef CONFIG_MMU
-
-unsigned long num_pages;
-
-static void __init mcf54xx_bootmem_alloc(void)
-{
-	unsigned long start_pfn;
-	unsigned long memstart;
-
-	/* _rambase and _ramend will be naturally page aligned */
-	m68k_memory[0].addr = _rambase;
-	m68k_memory[0].size = _ramend - _rambase;
-
-	/* compute total pages in system */
-	num_pages = (_ramend - _rambase) >> PAGE_SHIFT;
-
-	/* page numbers */
-	memstart = PAGE_ALIGN(_ramstart);
-	min_low_pfn = _rambase >> PAGE_SHIFT;
-	start_pfn = memstart >> PAGE_SHIFT;
-	max_low_pfn = _ramend >> PAGE_SHIFT;
-	high_memory = (void *)_ramend;
-
-	m68k_virt_to_node_shift = fls(_ramend - _rambase - 1) - 6;
-	module_fixup(NULL, __start_fixup, __stop_fixup);
-
-	/* setup bootmem data */
-	m68k_setup_node(0);
-	memstart += init_bootmem_node(NODE_DATA(0), start_pfn,
-		min_low_pfn, max_low_pfn);
-	free_bootmem_node(NODE_DATA(0), memstart, _ramend - memstart);
-}
-
-#endif /* CONFIG_MMU */
-
-/***************************************************************************/
-
-void __init config_BSP(char *commandp, int size)
-{
-#ifdef CONFIG_MMU
-	mcf54xx_bootmem_alloc();
-	mmu_context_init();
-#endif
-	mach_reset = mcf54xx_reset;
-	mach_sched_init = hw_timer_init;
-	m54xx_uarts_init();
-}
-
-/***************************************************************************/
diff --git a/ANDROID_3.4.5/arch/m68k/platform/54xx/firebee.c b/ANDROID_3.4.5/arch/m68k/platform/54xx/firebee.c
deleted file mode 100644
index 46d50534..00000000
--- a/ANDROID_3.4.5/arch/m68k/platform/54xx/firebee.c
+++ /dev/null
@@ -1,86 +0,0 @@
-/***************************************************************************/
-
-/*
- *	firebee.c -- extra startup code support for the FireBee boards
- *
- *	Copyright (C) 2011, Greg Ungerer (gerg@snapgear.com)
- */
-
-/***************************************************************************/
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <asm/coldfire.h>
-#include <asm/mcfsim.h>
-
-/***************************************************************************/
-
-/*
- *	8MB of NOR flash fitted to the FireBee board.
- */
-#define	FLASH_PHYS_ADDR		0xe0000000	/* Physical address of flash */
-#define	FLASH_PHYS_SIZE		0x00800000	/* Size of flash */
-
-#define	PART_BOOT_START		0x00000000	/* Start at bottom of flash */
-#define	PART_BOOT_SIZE		0x00040000	/* 256k in size */
-#define	PART_IMAGE_START	0x00040000	/* Start after boot loader */
-#define	PART_IMAGE_SIZE		0x006c0000	/* Most of flash */
-#define	PART_FPGA_START		0x00700000	/* Start at offset 7MB */
-#define	PART_FPGA_SIZE		0x00100000	/* 1MB in size */
-
-static struct mtd_partition firebee_flash_parts[] = {
-	{
-		.name	= "dBUG",
-		.offset	= PART_BOOT_START,
-		.size	= PART_BOOT_SIZE,
-	},
-	{
-		.name	= "FPGA",
-		.offset	= PART_FPGA_START,
-		.size	= PART_FPGA_SIZE,
-	},
-	{
-		.name	= "image",
-		.offset	= PART_IMAGE_START,
-		.size	= PART_IMAGE_SIZE,
-	},
-};
-
-static struct physmap_flash_data firebee_flash_data = {
-	.width		= 2,
-	.nr_parts	= ARRAY_SIZE(firebee_flash_parts),
-	.parts		= firebee_flash_parts,
-};
-
-static struct resource firebee_flash_resource = {
-	.start		= FLASH_PHYS_ADDR,
-	.end		= FLASH_PHYS_ADDR + FLASH_PHYS_SIZE,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device firebee_flash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data = &firebee_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &firebee_flash_resource,
-};
-
-/***************************************************************************/
-
-static int __init init_firebee(void)
-{
-	platform_device_register(&firebee_flash);
-	return 0;
-}
-
-arch_initcall(init_firebee);
-
-/***************************************************************************/
diff --git a/ANDROID_3.4.5/arch/m68k/platform/68328/Makefile b/ANDROID_3.4.5/arch/m68k/platform/68328/Makefile
deleted file mode 100644
index ee61bf84..00000000
--- a/ANDROID_3.4.5/arch/m68k/platform/68328/Makefile
+++ /dev/null
@@ -1,21 +0,0 @@
-#
-# Makefile for arch/m68knommu/platform/68328.
-#
-
-model-y			  := ram
-model-$(CONFIG_ROMKERNEL) := rom
-
-head-y			= head-$(model-y).o
-head-$(CONFIG_PILOT)	= head-pilot.o
-head-$(CONFIG_DRAGEN2)	= head-de2.o
-
-obj-y			+= entry.o ints.o timers.o
-obj-$(CONFIG_M68328)	+= config.o
-obj-$(CONFIG_ROM)	+= romvec.o
-
-extra-y			:= head.o
-
-$(obj)/head.o: $(obj)/$(head-y)
-	ln -sf $(head-y) $(obj)/head.o
-
-clean-files := $(obj)/head.o $(head-y)
diff --git a/ANDROID_3.4.5/arch/m68k/platform/68328/bootlogo.h b/ANDROID_3.4.5/arch/m68k/platform/68328/bootlogo.h
deleted file mode 100644
index b896c933..00000000
--- a/ANDROID_3.4.5/arch/m68k/platform/68328/bootlogo.h
+++ /dev/null
@@ -1,270 +0,0 @@
-#define bootlogo_width 160
-#define bootlogo_height 160
-unsigned char __attribute__ ((aligned(16))) bootlogo_bits[] = {
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x55, 0x01, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x40, 0x55, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x50, 0x55,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xac, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0xa0, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x10, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x01, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x44, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x82, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x20, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x11, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x80, 0x08, 0x00, 0x00, 0x00, 0x7e, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x08, 0x00, 0x00,
-  0x00, 0xff, 0x80, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x20, 0x04, 0x00, 0x00, 0x00, 0xf8, 0x80, 0x0f,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x50, 0x04, 0x00, 0x00, 0x00, 0x78, 0x80, 0x0f, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x28, 0x03, 0x00, 0x00,
-  0x00, 0x78, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x90, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x40,
-  0xa8, 0x02, 0x00, 0x00, 0x00, 0x3c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x70, 0x28, 0x01, 0x00, 0x00,
-  0x00, 0x3c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x20, 0x00, 0x00, 0xaa, 0x00, 0x00, 0x00, 0x00, 0x3c, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x70,
-  0x54, 0x01, 0x00, 0x00, 0x00, 0x3e, 0x80, 0x01, 0x3a, 0x78, 0x80, 0x0e,
-  0x50, 0xc0, 0x03, 0x0e, 0x00, 0x20, 0x00, 0x00, 0xaa, 0x00, 0x00, 0x00,
-  0x00, 0x3e, 0xf0, 0x83, 0x1f, 0xfc, 0xe0, 0x0f, 0x78, 0xf8, 0x87, 0x1f,
-  0x00, 0x18, 0x00, 0x30, 0xaa, 0x00, 0x00, 0x00, 0x00, 0x1e, 0xf8, 0xc3,
-  0x1f, 0xfc, 0xe0, 0x0f, 0x78, 0xf8, 0x87, 0x0f, 0x00, 0x20, 0x00, 0x10,
-  0x55, 0x00, 0x00, 0x00, 0x00, 0x1e, 0xc0, 0x03, 0x9f, 0xf3, 0x80, 0x0f,
-  0x78, 0x80, 0xc7, 0x0e, 0x00, 0x18, 0x00, 0x20, 0xaa, 0x00, 0x00, 0x00,
-  0x00, 0x1e, 0xe0, 0x03, 0x9f, 0xf1, 0x80, 0x07, 0x78, 0x80, 0x67, 0x00,
-  0x00, 0x24, 0x00, 0x18, 0x55, 0x00, 0x00, 0x00, 0x00, 0x0f, 0xe0, 0x01,
-  0x5e, 0xf0, 0x80, 0x07, 0x3c, 0x00, 0x2f, 0x00, 0x00, 0x14, 0x00, 0x20,
-  0xaa, 0x00, 0x00, 0x00, 0x00, 0x0f, 0xe0, 0x01, 0x7f, 0xf0, 0x80, 0x07,
-  0x3c, 0x00, 0x3f, 0x00, 0x00, 0x08, 0x00, 0x18, 0x55, 0x00, 0x00, 0x00,
-  0x00, 0x0f, 0xe0, 0x00, 0x3f, 0xf0, 0xc0, 0x03, 0x1e, 0x00, 0x1f, 0x00,
-  0x00, 0x14, 0x00, 0x28, 0xaa, 0x00, 0x00, 0x00, 0x80, 0x0f, 0xf0, 0x00,
-  0x1f, 0xf0, 0xc0, 0x03, 0x1f, 0x00, 0x1f, 0x00, 0x00, 0x04, 0x00, 0x0c,
-  0x54, 0x00, 0x00, 0x00, 0x80, 0x07, 0x78, 0x00, 0x1f, 0x78, 0xc0, 0x03,
-  0x1f, 0x00, 0x1e, 0x00, 0x00, 0x0a, 0x00, 0x12, 0xa8, 0x00, 0x00, 0x00,
-  0x80, 0x07, 0x78, 0x00, 0x1f, 0x78, 0xe0, 0x03, 0x1f, 0x00, 0x1f, 0x00,
-  0x00, 0x04, 0x00, 0x0a, 0x54, 0x00, 0x00, 0x00, 0x80, 0x07, 0x78, 0x80,
-  0x0f, 0x78, 0xe0, 0x03, 0x1f, 0x00, 0x1e, 0x00, 0x00, 0x0a, 0x00, 0x08,
-  0x50, 0x01, 0x00, 0x00, 0x84, 0x03, 0x78, 0x80, 0x07, 0x3c, 0xe0, 0xc1,
-  0x0f, 0x00, 0x1f, 0x00, 0x00, 0x04, 0x00, 0x06, 0xa8, 0x00, 0x00, 0x00,
-  0xc0, 0x03, 0x78, 0xc0, 0x07, 0x3c, 0xe0, 0xc1, 0x0f, 0x00, 0x1f, 0x00,
-  0x00, 0x0a, 0x00, 0x08, 0x50, 0x01, 0x00, 0x00, 0xc2, 0x01, 0x38, 0xc0,
-  0x07, 0x3c, 0xe0, 0x60, 0x0f, 0x80, 0x1e, 0x00, 0x00, 0x05, 0x00, 0x07,
-  0xa0, 0x00, 0x00, 0x80, 0xe0, 0x01, 0x3c, 0xc0, 0x07, 0x3c, 0xf0, 0xa0,
-  0x07, 0xc0, 0x1c, 0x00, 0x00, 0x0a, 0x80, 0x08, 0xa0, 0x02, 0x00, 0xa0,
-  0xe0, 0x21, 0x1c, 0xc0, 0x03, 0x1c, 0x71, 0x90, 0x47, 0x40, 0x3c, 0x04,
-  0x00, 0x05, 0x80, 0x06, 0xa0, 0x02, 0x00, 0x20, 0xe0, 0x31, 0x1e, 0xc3,
-  0x03, 0x1e, 0x79, 0x98, 0x47, 0x60, 0x38, 0x04, 0x00, 0x15, 0x40, 0x0a,
-  0xa0, 0x0a, 0x00, 0x1a, 0xe0, 0x19, 0x9e, 0xe1, 0x01, 0x9e, 0x78, 0xcc,
-  0xa7, 0x32, 0x78, 0x02, 0x80, 0x2a, 0x40, 0x05, 0x80, 0x2a, 0x00, 0x05,
-  0xe0, 0x0d, 0x9e, 0xe0, 0x01, 0xde, 0x78, 0xc6, 0x97, 0x1b, 0x78, 0x03,
-  0x80, 0x52, 0x30, 0x0a, 0x00, 0x95, 0xd2, 0x0a, 0xe0, 0x0f, 0xfe, 0xe0,
-  0x00, 0x7e, 0xf8, 0x87, 0x9f, 0x0f, 0xf8, 0x01, 0x00, 0xa1, 0x0e, 0x15,
-  0x80, 0x55, 0x55, 0x01, 0xe0, 0x01, 0x3c, 0xf0, 0x00, 0x3c, 0xf0, 0x80,
-  0x8f, 0x0f, 0x70, 0x00, 0x00, 0x81, 0x02, 0x14, 0x00, 0x54, 0x55, 0x00,
-  0xc0, 0x01, 0x3c, 0x00, 0x00, 0x0c, 0x60, 0x00, 0x07, 0x03, 0x70, 0x00,
-  0x80, 0x00, 0x00, 0x00, 0x00, 0xa0, 0x0a, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0xc0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x40, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x40, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x40, 0x01, 0x00, 0x11, 0x09, 0x00, 0x04, 0x00, 0x01, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x00,
-  0x00, 0x20, 0x01, 0x00, 0x04, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x49, 0x32, 0x49, 0x49, 0x91,
-  0x24, 0x86, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x20, 0x49, 0x0a, 0x09, 0xc9, 0x92, 0x14, 0x81, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x49,
-  0x18, 0x01, 0x49, 0x92, 0x0c, 0x43, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x49, 0x30, 0x01, 0x49, 0x92,
-  0x14, 0x26, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x08, 0x69, 0x22, 0x09, 0x49, 0xd2, 0x24, 0x24, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x04, 0x51,
-  0x1a, 0x09, 0x49, 0xa2, 0x44, 0x13, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x04, 0x01, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80,
-  0x08, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x87, 0x08, 0x00, 0x00, 0x00,
-  0xf2, 0xf0, 0xf0, 0xf0, 0xf0, 0x00, 0xf0, 0x00, 0x08, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x40, 0x88, 0x00, 0x00, 0x00, 0x00, 0x09, 0x09, 0x09, 0x09,
-  0x09, 0x01, 0x10, 0x01, 0x08, 0x00, 0x00, 0x00, 0x00, 0x40, 0x24, 0x80,
-  0x88, 0x86, 0x48, 0x04, 0x09, 0x08, 0x01, 0x01, 0x09, 0x01, 0x10, 0x71,
-  0x88, 0x66, 0x00, 0x00, 0x00, 0x40, 0x24, 0x80, 0x88, 0x89, 0x48, 0x84,
-  0x08, 0x08, 0x01, 0x01, 0x09, 0x01, 0x10, 0x89, 0x88, 0x99, 0x00, 0x00,
-  0x00, 0x40, 0x24, 0x80, 0x88, 0x88, 0x88, 0x82, 0xf8, 0xf0, 0xe0, 0x80,
-  0xf0, 0xf8, 0x13, 0x81, 0x88, 0x88, 0x00, 0x00, 0x00, 0x40, 0x24, 0x80,
-  0x88, 0x88, 0x08, 0x81, 0x08, 0x09, 0x01, 0x41, 0x08, 0x01, 0xf0, 0xf0,
-  0x88, 0x88, 0x00, 0x00, 0x00, 0x40, 0x24, 0x80, 0x88, 0x88, 0x88, 0x42,
-  0x08, 0x09, 0x01, 0x21, 0x08, 0x01, 0x10, 0x88, 0x88, 0x88, 0x00, 0x00,
-  0x00, 0x40, 0x46, 0x88, 0x88, 0x88, 0x4c, 0x44, 0x08, 0x09, 0x09, 0x11,
-  0x08, 0x01, 0x10, 0x88, 0x88, 0x88, 0x00, 0x00, 0x00, 0x80, 0x85, 0x87,
-  0x88, 0x08, 0x4b, 0x24, 0xf0, 0xf0, 0xf0, 0xf8, 0xf1, 0x00, 0x10, 0x70,
-  0x89, 0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe0, 0x7f, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0xf8, 0xff, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc,
-  0xff, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0xff, 0x0f, 0x00, 0x00,
-  0x00, 0x00, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0xff, 0x3f, 0x0f, 0x00, 0x00, 0x08, 0x02, 0x04, 0x00,
-  0x00, 0x00, 0x08, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff,
-  0xff, 0x1f, 0x00, 0x00, 0x48, 0x62, 0xc4, 0x31, 0x4a, 0x18, 0x3c, 0x03,
-  0x21, 0x45, 0x92, 0x00, 0x00, 0x00, 0x80, 0xff, 0xff, 0x1f, 0x00, 0x00,
-  0x48, 0x92, 0x24, 0x48, 0xb6, 0x24, 0x88, 0x04, 0x21, 0x4b, 0x92, 0x00,
-  0x00, 0x00, 0x80, 0xff, 0xff, 0x3f, 0x00, 0x00, 0xa8, 0xf2, 0x24, 0x48,
-  0x92, 0x3c, 0x88, 0x04, 0x21, 0x49, 0x62, 0x00, 0x00, 0x00, 0x80, 0xff,
-  0xff, 0x3f, 0x00, 0x00, 0x10, 0x11, 0x24, 0x48, 0x92, 0x04, 0x88, 0x04,
-  0x21, 0x49, 0x62, 0x00, 0x00, 0x00, 0x80, 0xff, 0xff, 0x3f, 0x00, 0x00,
-  0x10, 0x11, 0x24, 0x48, 0x92, 0x04, 0x88, 0x04, 0x21, 0x49, 0x93, 0x00,
-  0x00, 0x00, 0x80, 0xff, 0xcf, 0x7e, 0x00, 0x00, 0x10, 0xe1, 0xc4, 0x31,
-  0x92, 0x38, 0x30, 0x03, 0x2f, 0x89, 0x92, 0x00, 0x00, 0x00, 0x80, 0xe3,
-  0x07, 0x7f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xc1, 0x03, 0x7e, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x80, 0xc9, 0x23, 0x7e, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x95,
-  0x33, 0x7e, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xdd, 0xfb, 0x7e, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x80, 0x1d, 0xf8, 0x7e, 0x00, 0x00, 0x30, 0x00, 0x00, 0x00,
-  0x02, 0x00, 0x40, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x9b,
-  0x70, 0x7e, 0x00, 0x00, 0x08, 0x00, 0xe0, 0x00, 0x02, 0x00, 0x47, 0x80,
-  0x08, 0x00, 0x00, 0x08, 0x00, 0x00, 0x80, 0x03, 0x00, 0x7e, 0x00, 0x00,
-  0x3c, 0xa3, 0x20, 0x31, 0x52, 0x02, 0x49, 0xcc, 0x3f, 0xa3, 0x94, 0x08,
-  0x00, 0x00, 0x00, 0x27, 0x02, 0x7e, 0x00, 0x00, 0x88, 0xe4, 0x20, 0x41,
-  0xb2, 0x05, 0x49, 0x90, 0x88, 0xe4, 0x6c, 0x09, 0x00, 0x00, 0x00, 0x01,
-  0x00, 0x7e, 0x00, 0x00, 0x88, 0x24, 0xe0, 0x70, 0x92, 0x04, 0x47, 0x9c,
-  0x88, 0x24, 0x24, 0x09, 0x00, 0x00, 0x00, 0x13, 0x48, 0x7e, 0x00, 0x00,
-  0x88, 0x24, 0x20, 0x48, 0x92, 0x04, 0x41, 0x92, 0x88, 0x24, 0x24, 0x01,
-  0x00, 0x00, 0x00, 0x43, 0x00, 0xfe, 0x00, 0x00, 0x88, 0x24, 0x20, 0x48,
-  0x92, 0x04, 0x41, 0x92, 0x88, 0x24, 0x24, 0x09, 0x00, 0x00, 0x00, 0x07,
-  0x94, 0xce, 0x00, 0x00, 0x08, 0x23, 0x20, 0xb0, 0x92, 0x04, 0x41, 0x2c,
-  0x0b, 0x23, 0x24, 0x09, 0x00, 0x00, 0x00, 0x49, 0x02, 0xce, 0x01, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x11, 0x08, 0xdc, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x41,
-  0x01, 0xfc, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x01, 0x00, 0xf8, 0x07, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0xc0, 0x01, 0x00, 0xf8, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe0, 0x01,
-  0x00, 0xf0, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe0, 0x00, 0x00, 0xf0, 0x1f, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x70, 0x00, 0x00, 0xe0, 0x1f, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00,
-  0x00, 0xe0, 0x3f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3c, 0x00, 0x00, 0xe0, 0x7f, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x3c, 0x00, 0x00, 0xe0, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3e, 0x00,
-  0x00, 0xc0, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1f, 0x00, 0x00, 0xc0, 0xff, 0x01,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x1f, 0x00, 0x00, 0x80, 0xff, 0x01, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1f, 0x00,
-  0x00, 0x80, 0xff, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x0f, 0x00, 0x00, 0x00, 0xff, 0x07,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x80, 0x07, 0x00, 0x00, 0x00, 0xff, 0x07, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x07, 0x00,
-  0x00, 0x00, 0xfe, 0x07, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0xc0, 0x07, 0x00, 0x00, 0x00, 0xfe, 0x0f,
-  0x00, 0x00, 0x80, 0x08, 0x00, 0x00, 0x05, 0x00, 0x00, 0x80, 0x08, 0x00,
-  0x00, 0xc0, 0x03, 0x00, 0x78, 0x00, 0xfe, 0x0f, 0x00, 0x00, 0x40, 0x10,
-  0x12, 0x10, 0x05, 0x00, 0x00, 0x80, 0x00, 0x00, 0x00, 0xe0, 0x03, 0x00,
-  0x84, 0x00, 0xfe, 0x0f, 0x00, 0x00, 0x20, 0x26, 0x0a, 0x10, 0x9d, 0x39,
-  0xa6, 0xb2, 0x0a, 0x00, 0x00, 0xe0, 0x01, 0x00, 0x02, 0x00, 0xfe, 0x0f,
-  0x00, 0x00, 0x20, 0x21, 0x06, 0x28, 0x25, 0x4a, 0xa9, 0x8a, 0x09, 0x00,
-  0x00, 0xe0, 0x01, 0x22, 0x02, 0x00, 0xfc, 0x1f, 0x00, 0x00, 0x20, 0x21,
-  0x0e, 0x38, 0xa5, 0x4b, 0xa9, 0xb2, 0x09, 0x00, 0x00, 0xf0, 0x01, 0x22,
-  0x02, 0x00, 0xfc, 0x1f, 0x00, 0x00, 0x20, 0x21, 0x12, 0x44, 0xa5, 0x4a,
-  0x49, 0xa1, 0x0a, 0x00, 0x00, 0xf8, 0x01, 0x22, 0x02, 0x00, 0xfc, 0x1f,
-  0x00, 0x00, 0x20, 0x26, 0x52, 0x44, 0x9d, 0x4d, 0x46, 0x99, 0x0a, 0x00,
-  0x00, 0xfc, 0x01, 0x22, 0x02, 0x00, 0xfc, 0x1f, 0x00, 0x00, 0x40, 0x10,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc, 0x01, 0xb2,
-  0x84, 0x00, 0xfc, 0x1f, 0x00, 0x00, 0x80, 0x08, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x7c, 0x01, 0x6e, 0x78, 0x00, 0xfc, 0x1f,
-  0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0xfc, 0x01, 0x02, 0x00, 0x00, 0xfc, 0x1f, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x01, 0x02,
-  0x00, 0x00, 0xfe, 0x1f, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x06, 0x00, 0x00, 0xfc, 0x0f,
-  0x00, 0x00, 0x80, 0x08, 0x00, 0x00, 0x20, 0x01, 0x02, 0x00, 0x00, 0x00,
-  0x00, 0x24, 0x06, 0x00, 0x00, 0x00, 0xfc, 0x07, 0x00, 0x00, 0x40, 0x10,
-  0x1e, 0x20, 0x90, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0c, 0x00,
-  0x00, 0x80, 0xfc, 0x03, 0x00, 0x00, 0x20, 0x26, 0x22, 0x20, 0xf9, 0x89,
-  0x32, 0xe7, 0x08, 0x00, 0x00, 0x92, 0x38, 0x00, 0x00, 0x00, 0xfc, 0x01,
-  0x00, 0x00, 0x20, 0x21, 0x22, 0xa0, 0x92, 0x88, 0x4a, 0x29, 0x15, 0x00,
-  0x00, 0x00, 0x78, 0x00, 0x00, 0x40, 0xfa, 0x04, 0x00, 0x00, 0x20, 0x21,
-  0x22, 0xa0, 0x93, 0x88, 0x4a, 0x29, 0x1d, 0x00, 0x00, 0x11, 0xf2, 0x00,
-  0x00, 0x00, 0x80, 0x00, 0x00, 0x00, 0x20, 0x21, 0x22, 0xa8, 0x90, 0x88,
-  0x4a, 0x29, 0x05, 0x00, 0x48, 0x40, 0xf0, 0x01, 0x00, 0x80, 0x14, 0x04,
-  0x00, 0x00, 0x20, 0x26, 0x9e, 0x10, 0x93, 0x78, 0x32, 0x29, 0x19, 0x00,
-  0x00, 0x09, 0xe0, 0x03, 0x00, 0x00, 0x80, 0x10, 0x00, 0x00, 0x40, 0x10,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0xc5, 0x03,
-  0x00, 0x40, 0x22, 0x00, 0x00, 0x00, 0x80, 0x08, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x40, 0x04, 0xc0, 0x07, 0x00, 0x20, 0x08, 0x04,
-  0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x08, 0x50, 0x90, 0x03, 0x00, 0xb0, 0x00, 0x41, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x01, 0x00,
-  0x00, 0x38, 0x22, 0x08, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x48, 0x04, 0x44, 0x00, 0x00, 0x3c, 0x08, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x20, 0x00, 0x00, 0x00, 0xbf, 0x40, 0x42, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x40, 0x02, 0x00, 0x00, 0x00, 0x00, 0x24, 0x80, 0x48, 0x02,
-  0xc0, 0x1f, 0x00, 0x08, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x4e, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x0a, 0x00, 0x05, 0xf0, 0x3f, 0x09, 0x00,
-  0x00, 0x10, 0x24, 0x48, 0x10, 0x12, 0x41, 0x52, 0x24, 0x09, 0x46, 0x71,
-  0x90, 0x20, 0x02, 0xfc, 0xff, 0x1f, 0x80, 0x22, 0x00, 0x90, 0x24, 0x49,
-  0x12, 0x92, 0x40, 0xb2, 0x24, 0x09, 0xc9, 0x49, 0x04, 0x80, 0x90, 0xfc,
-  0xff, 0xbf, 0x24, 0x00, 0x00, 0x90, 0x24, 0x49, 0x12, 0x92, 0x40, 0x92,
-  0x24, 0x06, 0x49, 0x48, 0x50, 0x0a, 0x02, 0xfe, 0xff, 0x3f, 0x00, 0x05,
-  0x00, 0x50, 0xa5, 0x4a, 0x15, 0x92, 0x40, 0x92, 0x24, 0x06, 0x49, 0x48,
-  0x80, 0x40, 0x48, 0xfe, 0xff, 0x3f, 0x49, 0x00, 0x00, 0x20, 0x42, 0x84,
-  0x88, 0x1a, 0x41, 0x92, 0x34, 0x49, 0x49, 0x68, 0x00, 0x38, 0x10, 0x07,
-  0x00, 0x60, 0x80, 0x00, 0x00, 0x20, 0x42, 0x84, 0x88, 0x14, 0x4e, 0x92,
-  0x28, 0x49, 0x46, 0x50, 0x00, 0x80, 0x83, 0x01, 0x00, 0xa0, 0x6a, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40,
-  0x00, 0x00, 0xfc, 0x00, 0x00, 0xc0, 0x3b, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, };
diff --git a/ANDROID_3.4.5/arch/m68k/platform/68328/config.c b/ANDROID_3.4.5/arch/m68k/platform/68328/config.c
deleted file mode 100644
index 8c20e891..00000000
--- a/ANDROID_3.4.5/arch/m68k/platform/68328/config.c
+++ /dev/null
@@ -1,55 +0,0 @@
-/***************************************************************************/
-
-/*
- *  linux/arch/m68knommu/platform/68328/config.c
- *
- *  Copyright (C) 1993 Hamish Macdonald
- *  Copyright (C) 1999 D. Jeff Dionne
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file COPYING in the main directory of this archive
- * for more details.
- *
- * VZ Support/Fixes             Evan Stawnyczy <e@lineo.ca>
- */
-
-/***************************************************************************/
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/rtc.h>
-#include <asm/machdep.h>
-#include <asm/MC68328.h>
-#if defined(CONFIG_PILOT) || defined(CONFIG_INIT_LCD)
-#include "bootlogo.h"
-#endif
-
-/***************************************************************************/
-
-int m68328_hwclk(int set, struct rtc_time *t);
-
-/***************************************************************************/
-
-void m68328_reset (void)
-{
-  local_irq_disable();
-  asm volatile ("moveal #0x10c00000, %a0;\n\t"
-		"moveb #0, 0xFFFFF300;\n\t"
-		"moveal 0(%a0), %sp;\n\t"
-		"moveal 4(%a0), %a0;\n\t"
-		"jmp (%a0);");
-}
-
-/***************************************************************************/
-
-void config_BSP(char *command, int len)
-{
-  printk(KERN_INFO "\n68328 support D. Jeff Dionne <jeff@uclinux.org>\n");
-  printk(KERN_INFO "68328 support Kenneth Albanowski <kjahds@kjshds.com>\n");
-  printk(KERN_INFO "68328/Pilot support Bernhard Kuhn <kuhn@lpr.e-technik.tu-muenchen.de>\n");
-
-  mach_hwclk = m68328_hwclk;
-  mach_reset = m68328_reset;
-}
-
-/***************************************************************************/
diff --git a/ANDROID_3.4.5/arch/m68k/platform/68328/entry.S b/ANDROID_3.4.5/arch/m68k/platform/68328/entry.S
deleted file mode 100644
index 5c39b80e..00000000
--- a/ANDROID_3.4.5/arch/m68k/platform/68328/entry.S
+++ /dev/null
@@ -1,261 +0,0 @@
-/*
- *  linux/arch/m68knommu/platform/68328/entry.S
- *
- *  Copyright (C) 1991, 1992  Linus Torvalds
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file README.legal in the main directory of this archive
- * for more details.
- *
- * Linux/m68k support by Hamish Macdonald
- */
-
-#include <linux/linkage.h>
-#include <asm/thread_info.h>
-#include <asm/unistd.h>
-#include <asm/errno.h>
-#include <asm/setup.h>
-#include <asm/segment.h>
-#include <asm/traps.h>
-#include <asm/asm-offsets.h>
-#include <asm/entry.h>
-
-.text
-
-.globl system_call
-.globl resume
-.globl ret_from_exception
-.globl ret_from_signal
-.globl sys_call_table
-.globl ret_from_interrupt
-.globl bad_interrupt
-.globl inthandler1
-.globl inthandler2
-.globl inthandler3
-.globl inthandler4
-.globl inthandler5
-.globl inthandler6
-.globl inthandler7
-
-badsys:
-	movel	#-ENOSYS,%sp@(PT_OFF_D0)
-	jra	ret_from_exception
-
-do_trace:
-	movel	#-ENOSYS,%sp@(PT_OFF_D0) /* needed for strace*/
-	subql	#4,%sp
-	SAVE_SWITCH_STACK
-	jbsr	syscall_trace_enter
-	RESTORE_SWITCH_STACK
-	addql	#4,%sp
-	movel	%sp@(PT_OFF_ORIG_D0),%d1
-	movel	#-ENOSYS,%d0
-	cmpl	#NR_syscalls,%d1
-	jcc	1f
-	lsl	#2,%d1
-	lea	sys_call_table, %a0
-	jbsr	%a0@(%d1)
-
-1:	movel	%d0,%sp@(PT_OFF_D0)	/* save the return value */
-	subql	#4,%sp			/* dummy return address */
-	SAVE_SWITCH_STACK
-	jbsr	syscall_trace_leave
-
-ret_from_signal:
-	RESTORE_SWITCH_STACK
-	addql	#4,%sp
-	jra	ret_from_exception
-
-ENTRY(system_call)
-	SAVE_ALL_SYS
-
-	/* save top of frame*/
-	pea	%sp@
-	jbsr	set_esp0
-	addql	#4,%sp
-
-	movel	%sp@(PT_OFF_ORIG_D0),%d0
-
-	movel	%sp,%d1			/* get thread_info pointer */
-	andl	#-THREAD_SIZE,%d1
-	movel	%d1,%a2
-	btst	#(TIF_SYSCALL_TRACE%8),%a2@(TINFO_FLAGS+(31-TIF_SYSCALL_TRACE)/8)
-	jne	do_trace
-	cmpl	#NR_syscalls,%d0
-	jcc	badsys
-	lsl	#2,%d0
-	lea	sys_call_table,%a0
-	movel	%a0@(%d0), %a0
-	jbsr	%a0@
-	movel	%d0,%sp@(PT_OFF_D0)	/* save the return value*/
-
-ret_from_exception:
-	btst	#5,%sp@(PT_OFF_SR)	/* check if returning to kernel*/
-	jeq	Luser_return		/* if so, skip resched, signals*/
-
-Lkernel_return:
-	RESTORE_ALL
-
-Luser_return:
-	/* only allow interrupts when we are really the last one on the*/
-	/* kernel stack, otherwise stack overflow can occur during*/
-	/* heavy interrupt load*/
-	andw	#ALLOWINT,%sr
-
-	movel	%sp,%d1			/* get thread_info pointer */
-	andl	#-THREAD_SIZE,%d1
-	movel	%d1,%a2
-1:
-	move	%a2@(TINFO_FLAGS),%d1	/* thread_info->flags */
-	jne	Lwork_to_do
-	RESTORE_ALL
-
-Lwork_to_do:
-	movel	%a2@(TINFO_FLAGS),%d1	/* thread_info->flags */
-	btst	#TIF_NEED_RESCHED,%d1
-	jne	reschedule
-
-Lsignal_return:
-	subql	#4,%sp			/* dummy return address*/
-	SAVE_SWITCH_STACK
-	pea	%sp@(SWITCH_STACK_SIZE)
-	bsrw	do_signal
-	addql	#4,%sp
-	RESTORE_SWITCH_STACK
-	addql	#4,%sp
-	jra	1b
-
-/*
- * This is the main interrupt handler, responsible for calling process_int()
- */
-inthandler1:
-	SAVE_ALL_INT
-	movew	%sp@(PT_OFF_FORMATVEC), %d0
-	and	#0x3ff, %d0
-
-	movel	%sp,%sp@-
-	movel	#65,%sp@- 		/*  put vector # on stack*/
-	jbsr	process_int		/*  process the IRQ*/
-3:     	addql	#8,%sp			/*  pop parameters off stack*/
-	bra	ret_from_interrupt
-
-inthandler2:
-	SAVE_ALL_INT
-	movew	%sp@(PT_OFF_FORMATVEC), %d0
-	and	#0x3ff, %d0
-
-	movel	%sp,%sp@-
-	movel	#66,%sp@- 		/*  put vector # on stack*/
-	jbsr	process_int		/*  process the IRQ*/
-3:     	addql	#8,%sp			/*  pop parameters off stack*/
-	bra	ret_from_interrupt
-
-inthandler3:
-	SAVE_ALL_INT
-	movew	%sp@(PT_OFF_FORMATVEC), %d0
-	and	#0x3ff, %d0
-
-	movel	%sp,%sp@-
-	movel	#67,%sp@- 		/*  put vector # on stack*/
-	jbsr	process_int		/*  process the IRQ*/
-3:     	addql	#8,%sp			/*  pop parameters off stack*/
-	bra	ret_from_interrupt
-
-inthandler4:
-	SAVE_ALL_INT
-	movew	%sp@(PT_OFF_FORMATVEC), %d0
-	and	#0x3ff, %d0
-
-	movel	%sp,%sp@-
-	movel	#68,%sp@- 		/*  put vector # on stack*/
-	jbsr	process_int		/*  process the IRQ*/
-3:     	addql	#8,%sp			/*  pop parameters off stack*/
-	bra	ret_from_interrupt
-
-inthandler5:
-	SAVE_ALL_INT
-	movew	%sp@(PT_OFF_FORMATVEC), %d0
-	and	#0x3ff, %d0
-
-	movel	%sp,%sp@-
-	movel	#69,%sp@- 		/*  put vector # on stack*/
-	jbsr	process_int		/*  process the IRQ*/
-3:     	addql	#8,%sp			/*  pop parameters off stack*/
-	bra	ret_from_interrupt
-
-inthandler6:
-	SAVE_ALL_INT
-	movew	%sp@(PT_OFF_FORMATVEC), %d0
-	and	#0x3ff, %d0
-
-	movel	%sp,%sp@-
-	movel	#70,%sp@- 		/*  put vector # on stack*/
-	jbsr	process_int		/*  process the IRQ*/
-3:     	addql	#8,%sp			/*  pop parameters off stack*/
-	bra	ret_from_interrupt
-
-inthandler7:
-	SAVE_ALL_INT
-	movew	%sp@(PT_OFF_FORMATVEC), %d0
-	and	#0x3ff, %d0
-
-	movel	%sp,%sp@-
-	movel	#71,%sp@- 		/*  put vector # on stack*/
-	jbsr	process_int		/*  process the IRQ*/
-3:     	addql	#8,%sp			/*  pop parameters off stack*/
-	bra	ret_from_interrupt
-
-inthandler:
-	SAVE_ALL_INT
-	movew	%sp@(PT_OFF_FORMATVEC), %d0
-	and	#0x3ff, %d0
-
-	movel	%sp,%sp@-
-	movel	%d0,%sp@- 		/*  put vector # on stack*/
-	jbsr	process_int		/*  process the IRQ*/
-3:     	addql	#8,%sp			/*  pop parameters off stack*/
-	bra	ret_from_interrupt
-
-ret_from_interrupt:
-	jeq	1f
-2:
-	RESTORE_ALL
-1:
-	moveb	%sp@(PT_OFF_SR), %d0
-	and	#7, %d0
-	jhi	2b
-
-	/* check if we need to do software interrupts */
-	jeq	ret_from_exception
-
-	pea	ret_from_exception
-	jra	do_softirq
-
-
-/*
- * Handler for uninitialized and spurious interrupts.
- */
-ENTRY(bad_interrupt)
-	addql	#1,irq_err_count
-	rte
-
-/*
- * Beware - when entering resume, prev (the current task) is
- * in a0, next (the new task) is in a1, so don't change these
- * registers until their contents are no longer needed.
- */
-ENTRY(resume)
-	movel	%a0,%d1				/* save prev thread in d1 */
-	movew	%sr,%a0@(TASK_THREAD+THREAD_SR)	/* save sr */
-	SAVE_SWITCH_STACK
-	movel	%sp,%a0@(TASK_THREAD+THREAD_KSP) /* save kernel stack */
-	movel	%usp,%a3			/* save usp */
-	movel	%a3,%a0@(TASK_THREAD+THREAD_USP)
-
-	movel	%a1@(TASK_THREAD+THREAD_USP),%a3 /* restore user stack */
-	movel	%a3,%usp
-	movel	%a1@(TASK_THREAD+THREAD_KSP),%sp /* restore new thread stack */
-	RESTORE_SWITCH_STACK
-	movew	%a1@(TASK_THREAD+THREAD_SR),%sr	/* restore thread status reg */
-	rts
-
diff --git a/ANDROID_3.4.5/arch/m68k/platform/68328/head-de2.S b/ANDROID_3.4.5/arch/m68k/platform/68328/head-de2.S
deleted file mode 100644
index f632fdcb..00000000
--- a/ANDROID_3.4.5/arch/m68k/platform/68328/head-de2.S
+++ /dev/null
@@ -1,128 +0,0 @@
-
-#define	MEM_END	0x00800000	/* Memory size 8Mb */
-
-#undef CRT_DEBUG
-
-.macro	PUTC CHAR
-#ifdef CRT_DEBUG
-	moveq	#\CHAR, %d7
-	jsr	putc
-#endif
-.endm
-
-	.global	_start
-	.global _rambase
-	.global _ramvec
-	.global	_ramstart
-	.global	_ramend
-	
-	.data
-
-/*
- *	Set up the usable of RAM stuff
- */
-_rambase:
-	.long	0
-_ramvec:
-	.long	0
-_ramstart:
-	.long	0
-_ramend:
-	.long	0
-
-	.text
-
-_start:
-
-/*
- * Setup initial stack
- */
-	/* disable all interrupts */
-	movew	#0x2700, %sr
-	movel	#-1, 0xfffff304
-	movel	#MEM_END-4, %sp
-
-	PUTC	'\r'
-	PUTC	'\n'
-	PUTC	'A'
-	PUTC	'B'
-
-/*
- *	Determine end of RAM
- */
-
-	movel	#MEM_END, %a0
-	movel	%a0, _ramend
-
-	PUTC	'C'
-
-/*
- *	Move ROM filesystem above bss :-)
- */
-
-	moveal	#_sbss, %a0			/* romfs at the start of bss */
-	moveal	#_ebss, %a1			/* Set up destination  */
-	movel	%a0, %a2			/* Copy of bss start */
-
-	movel	8(%a0), %d1			/* Get size of ROMFS */
-	addql	#8, %d1				/* Allow for rounding */
-	andl	#0xfffffffc, %d1	/* Whole words */
-
-	addl	%d1, %a0			/* Copy from end */
-	addl	%d1, %a1			/* Copy from end */
-	movel	%a1, _ramstart		/* Set start of ram */
-
-1:
-	movel	-(%a0), %d0			/* Copy dword */
-	movel	%d0, -(%a1)
-	cmpl	%a0, %a2			/* Check if at end */
-	bne	1b
-
-	PUTC	'D'
-
-/*
- * Initialize BSS segment to 0
- */
-
-	lea	_sbss, %a0
-	lea	_ebss, %a1
-
-	/* Copy 0 to %a0 until %a0 == %a1 */
-2:	cmpal	%a0, %a1
-	beq	1f
-	clrl	(%a0)+
-	bra	2b
-1:
-
-	PUTC	'E'
-
-/*
- * Load the current task pointer and stack
- */
-
-	lea	init_thread_union, %a0
-	lea	0x2000(%a0), %sp
-
-	PUTC	'F'
-	PUTC	'\r'
-	PUTC	'\n'
-
-/*
- * Go
- */
-
-	jmp	start_kernel
-
-/*
- * Local functions
- */
- 
-#ifdef CRT_DEBUG
-putc:
-	moveb	%d7, 0xfffff907
-1:
-	movew	0xfffff906, %d7
-	andw	#0x2000, %d7
-	beq	1b
-	rts
-#endif
diff --git a/ANDROID_3.4.5/arch/m68k/platform/68328/head-pilot.S b/ANDROID_3.4.5/arch/m68k/platform/68328/head-pilot.S
deleted file mode 100644
index 2ebfd642..00000000
--- a/ANDROID_3.4.5/arch/m68k/platform/68328/head-pilot.S
+++ /dev/null
@@ -1,207 +0,0 @@
-/*
- * linux/arch/m68knommu/platform/68328/head-pilot.S
- * - A startup file for the MC68328
- *
- * Copyright (C) 1998  D. Jeff Dionne <jeff@ryeham.ee.ryerson.ca>,
- *                     Kenneth Albanowski <kjahds@kjahds.com>,
- *                     The Silver Hammer Group, Ltd.
- *
- * (c) 1995, Dionne & Associates
- * (c) 1995, DKG Display Tech.
- */
-
-#define ASSEMBLY
-
-#define IMMED #
-#define	DBG_PUTC(x)	moveb IMMED x, 0xfffff907
-
-
-.global _stext
-.global _start
-
-.global _rambase
-.global _ramvec
-.global _ramstart
-.global _ramend
-
-.global bootlogo_bits
-
-/*****************************************************************************/
-
-.data
-
-/*
- *      Set up the usable of RAM stuff. Size of RAM is determined then
- *      an initial stack set up at the end.
- */
-.align 4
-_ramvec:
-.long   0
-_rambase:
-.long   0
-_ramstart:
-.long   0
-_ramend:
-.long   0
-
-.text
-	
-_start:
-_stext:
-
-
-#ifdef CONFIG_M68328
-
-#ifdef CONFIG_PILOT
-	.byte 0x4e, 0xfa, 0x00, 0x0a /* Jmp +X bytes */
-	.byte 'b', 'o', 'o', 't'
-	.word 10000
-
-	nop
-#endif
-
-	moveq	#0, %d0
-	movew   %d0, 0xfffff618 /* Watchdog off */
-	movel	#0x00011f07, 0xfffff114 /* CS A1 Mask */
-
-	movew	#0x0800, 0xfffff906 /* Ignore CTS */
-	movew	#0x010b, 0xfffff902 /* BAUD to 9600 */
-
-	movew	#0x2410, 0xfffff200 /* PLLCR */
-	movew	#0x123, 0xfffff202 /* PLLFSR */
-
-#ifdef CONFIG_PILOT
-	moveb	#0, 0xfffffA27 /* LCKCON */
-	movel   #_start, 0xfffffA00 /* LSSA */
-	moveb   #0xa, 0xfffffA05 /* LVPW */
-	movew	#0x9f, 0xFFFFFa08 /* LXMAX */
-	movew	#0x9f, 0xFFFFFa0a /* LYMAX */
-	moveb   #9, 0xfffffa29 /* LBAR */
-	moveb   #0, 0xfffffa25 /* LPXCD */
-	moveb	#0x04, 0xFFFFFa20 /* LPICF */
-	moveb	#0x58, 0xfffffA27 /* LCKCON */
-	moveb	#0x85, 0xfffff429 /* PFDATA */
-	moveb	#0xd8, 0xfffffA27 /* LCKCON */
-	moveb	#0xc5, 0xfffff429 /* PFDATA */
-	moveb	#0xd5, 0xfffff429 /* PFDATA */
-
-	moveal	#0x00100000, %a3
-	moveal	#0x100ffc00, %a4
-#endif /* CONFIG_PILOT */
-
-#endif /* CONFIG_M68328 */
-
-	movew   #0x2700, %sr
-	lea	%a4@(-4), %sp
-
-	DBG_PUTC('\r')
-	DBG_PUTC('\n')
-	DBG_PUTC('A')
-
-   	moveq   #0,%d0
-	movew	#16384, %d0  /* PLL settle wait loop */
-L0:
-	subw	#1, %d0
-	bne	L0
-
-	DBG_PUTC('B')
-
-	/* Copy command line from beginning of RAM (+16) to end of bss */
-	movel	#CONFIG_VECTORBASE, %d7
-	addl	#16, %d7
-	moveal	%d7, %a0
-	moveal	#_ebss, %a1
-	lea	%a1@(512), %a2
-
-	DBG_PUTC('C')
-
-	/* Copy %a0 to %a1 until %a1 == %a2 */
-L2:
-	movel	%a0@+, %d0
-	movel	%d0, %a1@+
-	cmpal	%a1, %a2
-	bhi	L2
-
-	/* Copy data+init segment from ROM to RAM */
-	moveal	#_etext, %a0
-	moveal	#_sdata, %a1
-	moveal	#__init_end, %a2
-
-	DBG_PUTC('D')
-
-	/* Copy %a0 to %a1 until %a1 == %a2 */
-LD1:
-	movel	%a0@+, %d0
-	movel	%d0, %a1@+
-	cmpal	%a1, %a2
-	bhi	LD1
-
-	DBG_PUTC('E')
-
-	moveal	#_sbss, %a0
-	moveal	#_ebss, %a1
-
-	/* Copy 0 to %a0 until %a0 == %a1 */
-L1:
-	movel	#0, %a0@+
-	cmpal	%a0, %a1
-	bhi	L1
-
-	DBG_PUTC('F')
-
-	/* Copy command line from end of bss to command line */
-	moveal	#_ebss, %a0
-	moveal	#command_line, %a1
-	lea	%a1@(512), %a2
-
-	DBG_PUTC('G')
-
-	/* Copy %a0 to %a1 until %a1 == %a2 */
-L3:
-	movel	%a0@+, %d0
-	movel	%d0, %a1@+
-	cmpal	%a1, %a2
-	bhi	L3
-
-	movel	#_sdata, %d0	
-	movel	%d0, _rambase	
-	movel	#_ebss,	%d0
-	movel	%d0, _ramstart
-
-	movel	%a4, %d0
-	subl	#4096, %d0	/* Reserve 4K of stack */
-	moveq	#79, %d7
-	movel	%d0, _ramend
-
-	pea	0
-	pea	env
-	pea	%sp@(4)
-	pea	0
-
-	DBG_PUTC('H')
-
-#ifdef CONFIG_PILOT
-	movel	#bootlogo_bits, 0xFFFFFA00
-	moveb	#10, 0xFFFFFA05
-	movew	#160, 0xFFFFFA08
-	movew	#160, 0xFFFFFA0A
-#endif /* CONFIG_PILOT */
-
-	DBG_PUTC('I')
-
-	lea	init_thread_union, %a0
-	lea	0x2000(%a0), %sp
-
-	DBG_PUTC('J')
-	DBG_PUTC('\r')
-	DBG_PUTC('\n')
-
-	jsr	start_kernel
-_exit:
-
-	jmp	_exit
-
-
-	.data
-env:
-	.long	0
diff --git a/ANDROID_3.4.5/arch/m68k/platform/68328/head-ram.S b/ANDROID_3.4.5/arch/m68k/platform/68328/head-ram.S
deleted file mode 100644
index 7f1aeeac..00000000
--- a/ANDROID_3.4.5/arch/m68k/platform/68328/head-ram.S
+++ /dev/null
@@ -1,141 +0,0 @@
-
-	.global __main
-	.global __rom_start
-
-        .global _rambase
-        .global _ramstart
-	
-	.global splash_bits
-	.global _start
-	.global _stext
-	.global _edata
-
-#define DEBUG
-#define ROM_OFFSET 0x10C00000
-#define STACK_GAURD 0x10
-
-	.text
-	
-_start:
-_stext:
-	movew	#0x2700, %sr            /* Exceptions off! */
-
-#if 0
-	/* Init chip registers.  uCsimm specific */
-	moveb	#0x00,   0xfffffb0b	/* Watchdog off */
-	moveb	#0x10,   0xfffff000	/* SCR */
-
-	movew   #0x2400, 0xfffff200	/* PLLCR */
-	movew   #0x0123, 0xfffff202	/* PLLFSR */
-
-	moveb	#0x00,   0xfffff40b	/* enable chip select */
-	moveb	#0x00,   0xfffff423	/* enable /DWE */
-	moveb	#0x08,   0xfffffd0d	/* disable hardmap */
-	moveb	#0x07,   0xfffffd0e	/* level 7 interrupt clear */
-
-	movew	#0x8600, 0xfffff100	/* FLASH at 0x10c00000 */
-	movew	#0x018b, 0xfffff110	/* 2Meg, enable, 0ws */
-
-	movew	#0x8f00, 0xfffffc00	/* DRAM configuration */
-	movew	#0x9667, 0xfffffc02	/* DRAM control */
-	movew	#0x0000, 0xfffff106	/* DRAM at 0x00000000 */
-	movew	#0x068f, 0xfffff116	/* 8Meg, enable, 0ws */
-
-	moveb	#0x40,   0xfffff300	/* IVR */
-	movel	#0x007FFFFF, %d0	/* IMR */
-	movel	%d0,     0xfffff304
-
-	moveb	0xfffff42b, %d0
-	andb	#0xe0,	 %d0
-	moveb	%d0,	 0xfffff42b
-
-	moveb	#0x08,   0xfffff907	/* Ignore CTS */
-	movew	#0x010b, 0xfffff902	/* BAUD to 9600 */
-	movew	#0xe100, 0xfffff900	/* enable */
-#endif
-
-	movew	#16384, %d0  /* PLL settle wait loop */
-L0:
-	subw	#1, %d0
-	bne	L0
-#ifdef DEBUG
-	moveq	#70, %d7		/* 'F' */
-	moveb	%d7,0xfffff907          /* No absolute addresses */
-pclp1:
-	movew	0xfffff906, %d7
-	andw	#0x2000, %d7
-	beq	pclp1
-#endif /* DEBUG */
-
-#ifdef DEBUG
-	moveq	#82, %d7		/* 'R' */
-	moveb	%d7,0xfffff907          /* No absolute addresses */
-pclp3:
-	movew	0xfffff906, %d7
-	andw	#0x2000, %d7
-	beq	pclp3
-#endif /* DEBUG */
-	moveal	#0x007ffff0, %ssp
-	moveal	#_sbss, %a0
-	moveal	#_ebss, %a1
-
-	/* Copy 0 to %a0 until %a0 >= %a1 */
-L1:
-	movel	#0, %a0@+
-	cmpal	%a0, %a1
-	bhi	L1
-
-#ifdef DEBUG
-	moveq	#67, %d7                /* 'C' */
-	jsr	putc
-#endif /* DEBUG */
-
-	pea	0
-	pea	env
-	pea	%sp@(4)
-	pea	0
-
-#ifdef DEBUG
-	moveq	#70, %d7		/* 'F' */
-	jsr	putc
-#endif /* DEBUG */
-
-lp:
-	jsr	start_kernel
-        jmp lp
-_exit:
-
-	jmp	_exit
-
-__main:
-	/* nothing */
-	rts
-
-#ifdef DEBUG
-putc:
-	moveb	%d7,0xfffff907
-pclp:
-	movew	0xfffff906, %d7
-	andw	#0x2000, %d7
-	beq	pclp
-	rts
-#endif /* DEBUG */
-
-	.data
-
-/*
- *      Set up the usable of RAM stuff. Size of RAM is determined then
- *      an initial stack set up at the end.
- */
-.align 4
-_ramvec:
-.long   0
-_rambase:
-.long   0
-_ramstart:
-.long   0
-_ramend:
-.long   0
-
-env:
-	.long	0
diff --git a/ANDROID_3.4.5/arch/m68k/platform/68328/head-rom.S b/ANDROID_3.4.5/arch/m68k/platform/68328/head-rom.S
deleted file mode 100644
index a5ff96d0..00000000
--- a/ANDROID_3.4.5/arch/m68k/platform/68328/head-rom.S
+++ /dev/null
@@ -1,105 +0,0 @@
-	
-	.global _start
-	.global _stext
-
-	.global _rambase
-	.global _ramvec
-	.global _ramstart
-	.global _ramend
-
-#ifdef CONFIG_INIT_LCD
-	.global bootlogo_bits
-#endif
-
-	.data
-
-/*
- *      Set up the usable of RAM stuff. Size of RAM is determined then
- *      an initial stack set up at the end.
- */
-.align 4
-_ramvec:
-.long   0
-_rambase:
-.long   0
-_ramstart:
-.long   0
-_ramend:
-.long   0
-
-#define	RAMEND	(CONFIG_RAMBASE + CONFIG_RAMSIZE)
-
-	.text
-_start:
-_stext:	movew	#0x2700,%sr
-#ifdef CONFIG_INIT_LCD
-	movel	#bootlogo_bits, 0xfffffA00 /* LSSA */
-	moveb	#0x28,   0xfffffA05	/* LVPW */
-	movew	#0x280,  0xFFFFFa08	/* LXMAX */
-	movew	#0x1df,  0xFFFFFa0a	/* LYMAX */
-	moveb	#0,      0xfffffa29	/* LBAR */
-	moveb	#0,      0xfffffa25	/* LPXCD */
-	moveb	#0x08,   0xFFFFFa20	/* LPICF */
-	moveb	#0x01,   0xFFFFFA21	/* -ve pol */
-	moveb	#0x81,   0xfffffA27	/* LCKCON */
-	movew	#0xff00, 0xfffff412	/* LCD pins */
-#endif
-	moveal  #RAMEND-CONFIG_MEMORY_RESERVE*0x100000 - 0x10, %sp
-	movew	#32767, %d0  /* PLL settle wait loop */
-1:	subq	#1, %d0
-	bne	1b
-
-	/* Copy data segment from ROM to RAM */
-	moveal	#_etext, %a0
-	moveal	#_sdata, %a1
-	moveal	#_edata, %a2
-
-	/* Copy %a0 to %a1 until %a1 == %a2 */
-1:	movel	%a0@+, %a1@+
-	cmpal	%a1, %a2
-	bhi	1b
-
-	moveal	#_sbss, %a0
-	moveal	#_ebss, %a1
-	/* Copy 0 to %a0 until %a0 == %a1 */
-	
-1:
-	clrl	%a0@+
-	cmpal	%a0, %a1
-	bhi	1b
-
-        movel   #_sdata, %d0    
-        movel   %d0, _rambase        
-        movel   #_ebss, %d0
-        movel   %d0, _ramstart
-	movel	#RAMEND-CONFIG_MEMORY_RESERVE*0x100000, %d0
-	movel	%d0, _ramend
-	movel	#CONFIG_VECTORBASE,	%d0
-	movel	%d0, _ramvec
-	
-/*
- * load the current task pointer and stack
- */
-	lea	init_thread_union, %a0
-	lea	0x2000(%a0), %sp
-
-1:	jsr	start_kernel
-        bra 1b
-_exit:
-
-	jmp	_exit
-
-
-putc:
-	moveb	%d7,0xfffff907
-1:
-	movew	0xfffff906, %d7
-	andw	#0x2000, %d7
-	beq	1b
-	rts
-
-	.data
-env:
-	.long	0
-	.text
-
diff --git a/ANDROID_3.4.5/arch/m68k/platform/68328/ints.c b/ANDROID_3.4.5/arch/m68k/platform/68328/ints.c
deleted file mode 100644
index b3810feb..00000000
--- a/ANDROID_3.4.5/arch/m68k/platform/68328/ints.c
+++ /dev/null
@@ -1,186 +0,0 @@
-/*
- * linux/arch/m68knommu/platform/68328/ints.c
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file COPYING in the main directory of this archive
- * for more details.
- *
- * Copyright 1996 Roman Zippel
- * Copyright 1999 D. Jeff Dionne <jeff@rt-control.com>
- */
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <asm/traps.h>
-#include <asm/io.h>
-#include <asm/machdep.h>
-
-#if defined(CONFIG_M68328)
-#include <asm/MC68328.h>
-#elif defined(CONFIG_M68EZ328)
-#include <asm/MC68EZ328.h>
-#elif defined(CONFIG_M68VZ328)
-#include <asm/MC68VZ328.h>
-#endif
-
-/* assembler routines */
-asmlinkage void system_call(void);
-asmlinkage void buserr(void);
-asmlinkage void trap(void);
-asmlinkage void trap3(void);
-asmlinkage void trap4(void);
-asmlinkage void trap5(void);
-asmlinkage void trap6(void);
-asmlinkage void trap7(void);
-asmlinkage void trap8(void);
-asmlinkage void trap9(void);
-asmlinkage void trap10(void);
-asmlinkage void trap11(void);
-asmlinkage void trap12(void);
-asmlinkage void trap13(void);
-asmlinkage void trap14(void);
-asmlinkage void trap15(void);
-asmlinkage void trap33(void);
-asmlinkage void trap34(void);
-asmlinkage void trap35(void);
-asmlinkage void trap36(void);
-asmlinkage void trap37(void);
-asmlinkage void trap38(void);
-asmlinkage void trap39(void);
-asmlinkage void trap40(void);
-asmlinkage void trap41(void);
-asmlinkage void trap42(void);
-asmlinkage void trap43(void);
-asmlinkage void trap44(void);
-asmlinkage void trap45(void);
-asmlinkage void trap46(void);
-asmlinkage void trap47(void);
-asmlinkage irqreturn_t bad_interrupt(int, void *);
-asmlinkage irqreturn_t inthandler(void);
-asmlinkage irqreturn_t inthandler1(void);
-asmlinkage irqreturn_t inthandler2(void);
-asmlinkage irqreturn_t inthandler3(void);
-asmlinkage irqreturn_t inthandler4(void);
-asmlinkage irqreturn_t inthandler5(void);
-asmlinkage irqreturn_t inthandler6(void);
-asmlinkage irqreturn_t inthandler7(void);
-
-/* The 68k family did not have a good way to determine the source
- * of interrupts until later in the family.  The EC000 core does
- * not provide the vector number on the stack, we vector everything
- * into one vector and look in the blasted mask register...
- * This code is designed to be fast, almost constant time, not clean!
- */
-void process_int(int vec, struct pt_regs *fp)
-{
-	int irq;
-	int mask;
-
-	unsigned long pend = ISR;
-
-	while (pend) {
-		if (pend & 0x0000ffff) {
-			if (pend & 0x000000ff) {
-				if (pend & 0x0000000f) {
-					mask = 0x00000001;
-					irq = 0;
-				} else {
-					mask = 0x00000010;
-					irq = 4;
-				}
-			} else {
-				if (pend & 0x00000f00) {
-					mask = 0x00000100;
-					irq = 8;
-				} else {
-					mask = 0x00001000;
-					irq = 12;
-				}
-			}
-		} else {
-			if (pend & 0x00ff0000) {
-				if (pend & 0x000f0000) {
-					mask = 0x00010000;
-					irq = 16;
-				} else {
-					mask = 0x00100000;
-					irq = 20;
-				}
-			} else {
-				if (pend & 0x0f000000) {
-					mask = 0x01000000;
-					irq = 24;
-				} else {
-					mask = 0x10000000;
-					irq = 28;
-				}
-			}
-		}
-
-		while (! (mask & pend)) {
-			mask <<=1;
-			irq++;
-		}
-
-		do_IRQ(irq, fp);
-		pend &= ~mask;
-	}
-}
-
-static void intc_irq_unmask(struct irq_data *d)
-{
-	IMR &= ~(1 << d->irq);
-}
-
-static void intc_irq_mask(struct irq_data *d)
-{
-	IMR |= (1 << d->irq);
-}
-
-static struct irq_chip intc_irq_chip = {
-	.name		= "M68K-INTC",
-	.irq_mask	= intc_irq_mask,
-	.irq_unmask	= intc_irq_unmask,
-};
-
-/*
- * This function should be called during kernel startup to initialize
- * the machine vector table.
- */
-void __init trap_init(void)
-{
-	int i;
-
-	/* set up the vectors */
-	for (i = 72; i < 256; ++i)
-		_ramvec[i] = (e_vector) bad_interrupt;
-
-	_ramvec[32] = system_call;
-
-	_ramvec[65] = (e_vector) inthandler1;
-	_ramvec[66] = (e_vector) inthandler2;
-	_ramvec[67] = (e_vector) inthandler3;
-	_ramvec[68] = (e_vector) inthandler4;
-	_ramvec[69] = (e_vector) inthandler5;
-	_ramvec[70] = (e_vector) inthandler6;
-	_ramvec[71] = (e_vector) inthandler7;
-}
-
-void __init init_IRQ(void)
-{
-	int i;
-
-	IVR = 0x40; /* Set DragonBall IVR (interrupt base) to 64 */
-
-	/* turn off all interrupts */
-	IMR = ~0;
-
-	for (i = 0; (i < NR_IRQS); i++) {
-		irq_set_chip(i, &intc_irq_chip);
-		irq_set_handler(i, handle_level_irq);
-	}
-}
-
diff --git a/ANDROID_3.4.5/arch/m68k/platform/68328/romvec.S b/ANDROID_3.4.5/arch/m68k/platform/68328/romvec.S
deleted file mode 100644
index 31084466..00000000
--- a/ANDROID_3.4.5/arch/m68k/platform/68328/romvec.S
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * linux/arch/m68knommu/platform/68328/romvec.S
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file COPYING in the main directory of this archive
- * for more details.
- *
- * Copyright 1996 Roman Zippel
- * Copyright 1999 D. Jeff Dionne <jeff@rt-control.com>
- * Copyright 2006 Greg Ungerer <gerg@snapgear.com>
- */
-
-.global _start
-.global _buserr
-.global trap
-.global system_call
-
-.section .romvec
-
-e_vectors:
-.long CONFIG_RAMBASE+CONFIG_RAMSIZE-4, _start, buserr, trap
-.long trap, trap, trap, trap
-.long trap, trap, trap, trap
-.long trap, trap, trap, trap
-.long trap, trap, trap, trap
-.long trap, trap, trap, trap
-.long trap, trap, trap, trap
-.long trap, trap, trap, trap
-/* TRAP #0-15 */
-.long system_call, trap, trap, trap
-.long trap, trap, trap, trap
-.long trap, trap, trap, trap
-.long trap, trap, trap, trap
-.long 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
-
diff --git a/ANDROID_3.4.5/arch/m68k/platform/68328/timers.c b/ANDROID_3.4.5/arch/m68k/platform/68328/timers.c
deleted file mode 100644
index c801c172..00000000
--- a/ANDROID_3.4.5/arch/m68k/platform/68328/timers.c
+++ /dev/null
@@ -1,135 +0,0 @@
-/***************************************************************************/
-
-/*
- *  linux/arch/m68knommu/platform/68328/timers.c
- *
- *  Copyright (C) 1993 Hamish Macdonald
- *  Copyright (C) 1999 D. Jeff Dionne
- *  Copyright (C) 2001 Georges Menie, Ken Desmet
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file COPYING in the main directory of this archive
- * for more details.
- */
-
-/***************************************************************************/
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/clocksource.h>
-#include <linux/rtc.h>
-#include <asm/setup.h>
-#include <asm/pgtable.h>
-#include <asm/machdep.h>
-#include <asm/MC68VZ328.h>
-
-/***************************************************************************/
-
-#if defined(CONFIG_DRAGEN2)
-/* with a 33.16 MHz clock, this will give usec resolution to the time functions */
-#define CLOCK_SOURCE	TCTL_CLKSOURCE_SYSCLK
-#define CLOCK_PRE	7
-#define TICKS_PER_JIFFY	41450
-
-#elif defined(CONFIG_XCOPILOT_BUGS)
-/*
- * The only thing I know is that CLK32 is not available on Xcopilot
- * I have little idea about what frequency SYSCLK has on Xcopilot.
- * The values for prescaler and compare registers were simply
- * taken from the original source
- */
-#define CLOCK_SOURCE	TCTL_CLKSOURCE_SYSCLK
-#define CLOCK_PRE	2
-#define TICKS_PER_JIFFY	0xd7e4
-
-#else
-/* default to using the 32Khz clock */
-#define CLOCK_SOURCE	TCTL_CLKSOURCE_32KHZ
-#define CLOCK_PRE	31
-#define TICKS_PER_JIFFY	10
-#endif
-
-static u32 m68328_tick_cnt;
-
-/***************************************************************************/
-
-static irqreturn_t hw_tick(int irq, void *dummy)
-{
-	/* Reset Timer1 */
-	TSTAT &= 0;
-
-	m68328_tick_cnt += TICKS_PER_JIFFY;
-	return arch_timer_interrupt(irq, dummy);
-}
-
-/***************************************************************************/
-
-static struct irqaction m68328_timer_irq = {
-	.name	 = "timer",
-	.flags	 = IRQF_DISABLED | IRQF_TIMER,
-	.handler = hw_tick,
-};
-
-/***************************************************************************/
-
-static cycle_t m68328_read_clk(struct clocksource *cs)
-{
-	unsigned long flags;
-	u32 cycles;
-
-	local_irq_save(flags);
-	cycles = m68328_tick_cnt + TCN;
-	local_irq_restore(flags);
-
-	return cycles;
-}
-
-/***************************************************************************/
-
-static struct clocksource m68328_clk = {
-	.name	= "timer",
-	.rating	= 250,
-	.read	= m68328_read_clk,
-	.mask	= CLOCKSOURCE_MASK(32),
-	.flags	= CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
-/***************************************************************************/
-
-void hw_timer_init(void)
-{
-	/* disable timer 1 */
-	TCTL = 0;
-
-	/* set ISR */
-	setup_irq(TMR_IRQ_NUM, &m68328_timer_irq);
-
-	/* Restart mode, Enable int, Set clock source */
-	TCTL = TCTL_OM | TCTL_IRQEN | CLOCK_SOURCE;
-	TPRER = CLOCK_PRE;
-	TCMP = TICKS_PER_JIFFY;
-
-	/* Enable timer 1 */
-	TCTL |= TCTL_TEN;
-	clocksource_register_hz(&m68328_clk, TICKS_PER_JIFFY*HZ);
-}
-
-/***************************************************************************/
-
-int m68328_hwclk(int set, struct rtc_time *t)
-{
-	if (!set) {
-		long now = RTCTIME;
-		t->tm_year = t->tm_mon = t->tm_mday = 1;
-		t->tm_hour = (now >> 24) % 24;
-		t->tm_min = (now >> 16) % 60;
-		t->tm_sec = now % 60;
-	}
-
-	return 0;
-}
-
-/***************************************************************************/
diff --git a/ANDROID_3.4.5/arch/m68k/platform/68360/Makefile b/ANDROID_3.4.5/arch/m68k/platform/68360/Makefile
deleted file mode 100644
index f6f43438..00000000
--- a/ANDROID_3.4.5/arch/m68k/platform/68360/Makefile
+++ /dev/null
@@ -1,12 +0,0 @@
-#
-# Makefile for arch/m68knommu/platform/68360.
-#
-model-y			  := ram
-model-$(CONFIG_ROMKERNEL) := rom
-
-obj-y := config.o commproc.o entry.o ints.o
-
-extra-y := head.o
-
-$(obj)/head.o: $(obj)/head-$(model-y).o
-	ln -sf head-$(model-y).o $(obj)/head.o
diff --git a/ANDROID_3.4.5/arch/m68k/platform/68360/commproc.c b/ANDROID_3.4.5/arch/m68k/platform/68360/commproc.c
deleted file mode 100644
index 8e4e10cc..00000000
--- a/ANDROID_3.4.5/arch/m68k/platform/68360/commproc.c
+++ /dev/null
@@ -1,308 +0,0 @@
-/*
- * General Purpose functions for the global management of the
- * Communication Processor Module.
- *
- * Copyright (c) 2000 Michael Leslie <mleslie@lineo.com>
- * Copyright (c) 1997 Dan Malek (dmalek@jlc.net)
- *
- * In addition to the individual control of the communication
- * channels, there are a few functions that globally affect the
- * communication processor.
- *
- * Buffer descriptors must be allocated from the dual ported memory
- * space.  The allocator for that is here.  When the communication
- * process is reset, we reclaim the memory available.  There is
- * currently no deallocator for this memory.
- * The amount of space available is platform dependent.  On the
- * MBX, the EPPC software loads additional microcode into the
- * communication processor, and uses some of the DP ram for this
- * purpose.  Current, the first 512 bytes and the last 256 bytes of
- * memory are used.  Right now I am conservative and only use the
- * memory that can never be used for microcode.  If there are
- * applications that require more DP ram, we can expand the boundaries
- * but then we have to be careful of any downloaded microcode.
- *
- */
-
-/*
- * Michael Leslie <mleslie@lineo.com>
- * adapted Dan Malek's ppc8xx drivers to M68360
- *
- */
-
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <asm/irq.h>
-#include <asm/m68360.h>
-#include <asm/commproc.h>
-
-/* #include <asm/page.h> */
-/* #include <asm/pgtable.h> */
-extern void *_quicc_base;
-extern unsigned int system_clock;
-
-
-static uint dp_alloc_base;	/* Starting offset in DP ram */
-static uint dp_alloc_top;	/* Max offset + 1 */
-
-#if 0
-static	void	*host_buffer;	/* One page of host buffer */
-static	void	*host_end;	    /* end + 1 */
-#endif
-
-/* struct  cpm360_t *cpmp; */         /* Pointer to comm processor space */
-
-QUICC  *pquicc;
-/* QUICC  *quicc_dpram; */ /* mleslie - temporary; use extern pquicc elsewhere instead */
-
-
-/* CPM interrupt vector functions. */
-struct	cpm_action {
-	void	(*handler)(void *);
-	void	*dev_id;
-};
-static	struct	cpm_action cpm_vecs[CPMVEC_NR];
-static	void	cpm_interrupt(int irq, void * dev, struct pt_regs * regs);
-static	void	cpm_error_interrupt(void *);
-
-/* prototypes: */
-void cpm_install_handler(int vec, void (*handler)(), void *dev_id);
-void m360_cpm_reset(void);
-
-
-
-
-void m360_cpm_reset()
-{
-/* 	pte_t		   *pte; */
-
-	pquicc = (struct quicc *)(_quicc_base); /* initialized in crt0_rXm.S */
-
-	/* Perform a CPM reset. */
-	pquicc->cp_cr = (SOFTWARE_RESET | CMD_FLAG);
-
-	/* Wait for CPM to become ready (should be 2 clocks). */
-	while (pquicc->cp_cr & CMD_FLAG);
-
-	/* On the recommendation of the 68360 manual, p. 7-60
-	 * - Set sdma interrupt service mask to 7
-	 * - Set sdma arbitration ID to 4
-	 */
-	pquicc->sdma_sdcr = 0x0740;
-
-
-	/* Claim the DP memory for our use.
-	 */
-	dp_alloc_base = CPM_DATAONLY_BASE;
-	dp_alloc_top = dp_alloc_base + CPM_DATAONLY_SIZE;
-
-
-	/* Set the host page for allocation.
-	 */
-	/* 	host_buffer = host_page_addr; */
-	/* 	host_end = host_page_addr + PAGE_SIZE; */
-
-	/* 	pte = find_pte(&init_mm, host_page_addr); */
-	/* 	pte_val(*pte) |= _PAGE_NO_CACHE; */
-	/* 	flush_tlb_page(current->mm->mmap, host_buffer); */
-
-	/* Tell everyone where the comm processor resides.
-	*/
-/* 	cpmp = (cpm360_t *)commproc; */
-}
-
-
-/* This is called during init_IRQ.  We used to do it above, but this
- * was too early since init_IRQ was not yet called.
- */
-void
-cpm_interrupt_init(void)
-{
-	/* Initialize the CPM interrupt controller.
-	 * NOTE THAT pquicc had better have been initialized!
-	 * reference: MC68360UM p. 7-377
-	 */
-	pquicc->intr_cicr =
-		(CICR_SCD_SCC4 | CICR_SCC_SCC3 | CICR_SCB_SCC2 | CICR_SCA_SCC1) |
-		(CPM_INTERRUPT << 13) |
-		CICR_HP_MASK |
-		(CPM_VECTOR_BASE << 5) |
-		CICR_SPS;
-
-	/* mask all CPM interrupts from reaching the cpu32 core: */
-	pquicc->intr_cimr = 0;
-
-
-	/* mles - If I understand correctly, the 360 just pops over to the CPM
-	 * specific vector, obviating the necessity to vector through the IRQ
-	 * whose priority the CPM is set to. This needs a closer look, though.
-	 */
-
-	/* Set our interrupt handler with the core CPU. */
-/* 	if (request_irq(CPM_INTERRUPT, cpm_interrupt, 0, "cpm", NULL) != 0) */
-/* 		panic("Could not allocate CPM IRQ!"); */
-
-	/* Install our own error handler.
-	 */
-	/* I think we want to hold off on this one for the moment - mles */
-	/* cpm_install_handler(CPMVEC_ERROR, cpm_error_interrupt, NULL); */
-
-	/* master CPM interrupt enable */
-	/* pquicc->intr_cicr |= CICR_IEN; */ /* no such animal for 360 */
-}
-
-
-
-/* CPM interrupt controller interrupt.
-*/
-static	void
-cpm_interrupt(int irq, void * dev, struct pt_regs * regs)
-{
-	/* uint	vec; */
-
-	/* mles: Note that this stuff is currently being performed by
-	 * M68360_do_irq(int vec, struct pt_regs *fp), in ../ints.c  */
-
-	/* figure out the vector */
-	/* call that vector's handler */
-	/* clear the irq's bit in the service register */
-
-#if 0 /* old 860 stuff: */
-	/* Get the vector by setting the ACK bit and then reading
-	 * the register.
-	 */
-	((volatile immap_t *)IMAP_ADDR)->im_cpic.cpic_civr = 1;
-	vec = ((volatile immap_t *)IMAP_ADDR)->im_cpic.cpic_civr;
-	vec >>= 11;
-
-
-	if (cpm_vecs[vec].handler != 0)
-		(*cpm_vecs[vec].handler)(cpm_vecs[vec].dev_id);
-	else
-		((immap_t *)IMAP_ADDR)->im_cpic.cpic_cimr &= ~(1 << vec);
-
-	/* After servicing the interrupt, we have to remove the status
-	 * indicator.
-	 */
-	((immap_t *)IMAP_ADDR)->im_cpic.cpic_cisr |= (1 << vec);
-#endif
-
-}
-
-/* The CPM can generate the error interrupt when there is a race condition
- * between generating and masking interrupts.  All we have to do is ACK it
- * and return.  This is a no-op function so we don't need any special
- * tests in the interrupt handler.
- */
-static	void
-cpm_error_interrupt(void *dev)
-{
-}
-
-/* Install a CPM interrupt handler.
-*/
-void
-cpm_install_handler(int vec, void (*handler)(), void *dev_id)
-{
-
-	request_irq(vec, handler, 0, "timer", dev_id);
-
-/* 	if (cpm_vecs[vec].handler != 0) */
-/* 		printk(KERN_INFO "CPM interrupt %x replacing %x\n", */
-/* 			(uint)handler, (uint)cpm_vecs[vec].handler); */
-/* 	cpm_vecs[vec].handler = handler; */
-/* 	cpm_vecs[vec].dev_id = dev_id; */
-
-	/*              ((immap_t *)IMAP_ADDR)->im_cpic.cpic_cimr |= (1 << vec); */
-/* 	pquicc->intr_cimr |= (1 << vec); */
-
-}
-
-/* Free a CPM interrupt handler.
-*/
-void
-cpm_free_handler(int vec)
-{
-	cpm_vecs[vec].handler = NULL;
-	cpm_vecs[vec].dev_id = NULL;
-	/* ((immap_t *)IMAP_ADDR)->im_cpic.cpic_cimr &= ~(1 << vec); */
-	pquicc->intr_cimr &= ~(1 << vec);
-}
-
-
-
-
-/* Allocate some memory from the dual ported ram.  We may want to
- * enforce alignment restrictions, but right now everyone is a good
- * citizen.
- */
-uint
-m360_cpm_dpalloc(uint size)
-{
-        uint    retloc;
-
-        if ((dp_alloc_base + size) >= dp_alloc_top)
-                return(CPM_DP_NOSPACE);
-
-        retloc = dp_alloc_base;
-        dp_alloc_base += size;
-
-        return(retloc);
-}
-
-
-#if 0 /* mleslie - for now these are simply kmalloc'd */
-/* We also own one page of host buffer space for the allocation of
- * UART "fifos" and the like.
- */
-uint
-m360_cpm_hostalloc(uint size)
-{
-	uint	retloc;
-
-	if ((host_buffer + size) >= host_end)
-		return(0);
-
-	retloc = host_buffer;
-	host_buffer += size;
-
-	return(retloc);
-}
-#endif
-
-
-/* Set a baud rate generator.  This needs lots of work.  There are
- * four BRGs, any of which can be wired to any channel.
- * The internal baud rate clock is the system clock divided by 16.
- * This assumes the baudrate is 16x oversampled by the uart.
- */
-/* #define BRG_INT_CLK	(((bd_t *)__res)->bi_intfreq * 1000000) */
-#define BRG_INT_CLK		system_clock
-#define BRG_UART_CLK	(BRG_INT_CLK/16)
-
-void
-m360_cpm_setbrg(uint brg, uint rate)
-{
-	volatile uint	*bp;
-
-	/* This is good enough to get SMCs running.....
-	 */
-	/* bp = (uint *)&cpmp->cp_brgc1; */
-	bp = (volatile uint *)(&pquicc->brgc[0].l);
-	bp += brg;
-	*bp = ((BRG_UART_CLK / rate - 1) << 1) | CPM_BRG_EN;
-}
-
-
-/*
- * Local variables:
- *  c-indent-level: 4
- *  c-basic-offset: 4
- *  tab-width: 4
- * End:
- */
diff --git a/ANDROID_3.4.5/arch/m68k/platform/68360/config.c b/ANDROID_3.4.5/arch/m68k/platform/68360/config.c
deleted file mode 100644
index 255fc039..00000000
--- a/ANDROID_3.4.5/arch/m68k/platform/68360/config.c
+++ /dev/null
@@ -1,179 +0,0 @@
-/*
- *  linux/arch/m68knommu/platform/68360/config.c
- *
- *  Copyright (c) 2000 Michael Leslie <mleslie@lineo.com>
- *  Copyright (C) 1993 Hamish Macdonald
- *  Copyright (C) 1999 D. Jeff Dionne <jeff@uclinux.org>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file COPYING in the main directory of this archive
- * for more details.
- */
-
-#include <stdarg.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-
-#include <asm/setup.h>
-#include <asm/pgtable.h>
-#include <asm/machdep.h>
-#include <asm/m68360.h>
-
-#ifdef CONFIG_UCQUICC
-#include <asm/bootstd.h>
-#endif
-
-extern void m360_cpm_reset(void);
-
-// Mask to select if the PLL prescaler is enabled.
-#define MCU_PREEN   ((unsigned short)(0x0001 << 13))
-
-#if defined(CONFIG_UCQUICC)
-#define OSCILLATOR  (unsigned long int)33000000
-#endif
-
-unsigned long int system_clock;
-
-extern QUICC *pquicc;
-
-/* TODO  DON"T Hard Code this */
-/* calculate properly using the right PLL and prescaller */
-// unsigned int system_clock = 33000000l;
-extern unsigned long int system_clock; //In kernel setup.c
-
-
-static irqreturn_t hw_tick(int irq, void *dummy)
-{
-  /* Reset Timer1 */
-  /* TSTAT &= 0; */
-
-  pquicc->timer_ter1 = 0x0002; /* clear timer event */
-
-  return arch_timer_interrupt(irq, dummy);
-}
-
-static struct irqaction m68360_timer_irq = {
-	.name	 = "timer",
-	.flags	 = IRQF_DISABLED | IRQF_TIMER,
-	.handler = hw_tick,
-};
-
-void hw_timer_init(void)
-{
-  unsigned char prescaler;
-  unsigned short tgcr_save;
-
-#if 0
-  /* Restart mode, Enable int, 32KHz, Enable timer */
-  TCTL = TCTL_OM | TCTL_IRQEN | TCTL_CLKSOURCE_32KHZ | TCTL_TEN;
-  /* Set prescaler (Divide 32KHz by 32)*/
-  TPRER = 31;
-  /* Set compare register  32Khz / 32 / 10 = 100 */
-  TCMP = 10;                                                              
-
-  request_irq(IRQ_MACHSPEC | 1, timer_routine, 0, "timer", NULL);
-#endif
-
-  /* General purpose quicc timers: MC68360UM p7-20 */
-
-  /* Set up timer 1 (in [1..4]) to do 100Hz */
-  tgcr_save = pquicc->timer_tgcr & 0xfff0;
-  pquicc->timer_tgcr  = tgcr_save; /* stop and reset timer 1 */
-  /* pquicc->timer_tgcr |= 0x4444; */ /* halt timers when FREEZE (ie bdm freeze) */
-
-  prescaler = 8;
-  pquicc->timer_tmr1 = 0x001a | /* or=1, frr=1, iclk=01b */
-                           (unsigned short)((prescaler - 1) << 8);
-    
-  pquicc->timer_tcn1 = 0x0000; /* initial count */
-  /* calculate interval for 100Hz based on the _system_clock: */
-  pquicc->timer_trr1 = (system_clock/ prescaler) / HZ; /* reference count */
-
-  pquicc->timer_ter1 = 0x0003; /* clear timer events */
-
-  /* enable timer 1 interrupt in CIMR */
-  setup_irq(CPMVEC_TIMER1, &m68360_timer_irq);
-
-  /* Start timer 1: */
-  tgcr_save = (pquicc->timer_tgcr & 0xfff0) | 0x0001;
-  pquicc->timer_tgcr  = tgcr_save;
-}
-
-int BSP_set_clock_mmss(unsigned long nowtime)
-{
-#if 0
-  short real_seconds = nowtime % 60, real_minutes = (nowtime / 60) % 60;
-
-  tod->second1 = real_seconds / 10;
-  tod->second2 = real_seconds % 10;
-  tod->minute1 = real_minutes / 10;
-  tod->minute2 = real_minutes % 10;
-#endif
-  return 0;
-}
-
-void BSP_reset (void)
-{
-  local_irq_disable();
-  asm volatile (
-    "moveal #_start, %a0;\n"
-    "moveb #0, 0xFFFFF300;\n"
-    "moveal 0(%a0), %sp;\n"
-    "moveal 4(%a0), %a0;\n"
-    "jmp (%a0);\n"
-    );
-}
-
-unsigned char *scc1_hwaddr;
-static int errno;
-
-#if defined (CONFIG_UCQUICC)
-_bsc0(char *, getserialnum)
-_bsc1(unsigned char *, gethwaddr, int, a)
-_bsc1(char *, getbenv, char *, a)
-#endif
-
-
-void config_BSP(char *command, int len)
-{
-  unsigned char *p;
-
-  m360_cpm_reset();
-
-  /* Calculate the real system clock value. */
-  {
-     unsigned int local_pllcr = (unsigned int)(pquicc->sim_pllcr);
-     if( local_pllcr & MCU_PREEN ) // If the prescaler is dividing by 128
-     {
-         int mf = (int)(pquicc->sim_pllcr & 0x0fff);
-         system_clock = (OSCILLATOR / 128) * (mf + 1);
-     }
-     else
-     {
-         int mf = (int)(pquicc->sim_pllcr & 0x0fff);
-         system_clock = (OSCILLATOR) * (mf + 1);
-     }
-  }
-
-  printk(KERN_INFO "\n68360 QUICC support (C) 2000 Lineo Inc.\n");
-
-#if defined(CONFIG_UCQUICC) && 0
-  printk(KERN_INFO "uCquicc serial string [%s]\n",getserialnum());
-  p = scc1_hwaddr = gethwaddr(0);
-  printk(KERN_INFO "uCquicc hwaddr %.2x:%.2x:%.2x:%.2x:%.2x:%.2x\n",
-         p[0], p[1], p[2], p[3], p[4], p[5]);
-
-  p = getbenv("APPEND");
-  if (p)
-    strcpy(p,command);
-  else
-    command[0] = 0;
-#else
-  scc1_hwaddr = "\00\01\02\03\04\05";
-#endif
- 
-  mach_reset = BSP_reset;
-}
diff --git a/ANDROID_3.4.5/arch/m68k/platform/68360/entry.S b/ANDROID_3.4.5/arch/m68k/platform/68360/entry.S
deleted file mode 100644
index aa47d1d4..00000000
--- a/ANDROID_3.4.5/arch/m68k/platform/68360/entry.S
+++ /dev/null
@@ -1,182 +0,0 @@
-/*
- *  linux/arch/m68knommu/platform/68360/entry.S
- *
- *  Copyright (C) 1991, 1992  Linus Torvalds
- *  Copyright (C) 2001 SED Systems, a Division of Calian Ltd.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file README.legal in the main directory of this archive
- * for more details.
- *
- * Linux/m68k support by Hamish Macdonald
- * M68360 Port by SED Systems, and Lineo.
- */
-
-#include <linux/linkage.h>
-#include <asm/thread_info.h>
-#include <asm/unistd.h>
-#include <asm/errno.h>
-#include <asm/setup.h>
-#include <asm/segment.h>
-#include <asm/traps.h>
-#include <asm/asm-offsets.h>
-#include <asm/entry.h>
-
-.text
-
-.globl system_call
-.globl resume
-.globl ret_from_exception
-.globl ret_from_signal
-.globl sys_call_table
-.globl ret_from_interrupt
-.globl bad_interrupt
-.globl inthandler
-
-badsys:
-	movel	#-ENOSYS,%sp@(PT_OFF_D0)
-	jra	ret_from_exception
-
-do_trace:
-	movel	#-ENOSYS,%sp@(PT_OFF_D0) /* needed for strace*/
-	subql	#4,%sp
-	SAVE_SWITCH_STACK
-	jbsr	syscall_trace_enter
-	RESTORE_SWITCH_STACK
-	addql	#4,%sp
-	movel	%sp@(PT_OFF_ORIG_D0),%d1
-	movel	#-ENOSYS,%d0
-	cmpl	#NR_syscalls,%d1
-	jcc	1f
-	lsl	#2,%d1
-	lea	sys_call_table, %a0
-	jbsr	%a0@(%d1)
-
-1:	movel	%d0,%sp@(PT_OFF_D0)	/* save the return value */
-	subql	#4,%sp			/* dummy return address */
-	SAVE_SWITCH_STACK
-	jbsr	syscall_trace_leave
-
-ret_from_signal:
-	RESTORE_SWITCH_STACK
-	addql	#4,%sp
-	jra	ret_from_exception
-
-ENTRY(system_call)
-	SAVE_ALL_SYS
-
-	/* save top of frame*/
-	pea	%sp@
-	jbsr	set_esp0
-	addql	#4,%sp
-
-	movel	%sp@(PT_OFF_ORIG_D0),%d0
-
-	movel	%sp,%d1			/* get thread_info pointer */
-	andl	#-THREAD_SIZE,%d1
-	movel	%d1,%a2
-	btst	#(TIF_SYSCALL_TRACE%8),%a2@(TINFO_FLAGS+(31-TIF_SYSCALL_TRACE)/8)
-	jne	do_trace
-	cmpl	#NR_syscalls,%d0
-	jcc	badsys
-	lsl	#2,%d0
-	lea	sys_call_table,%a0
-	movel	%a0@(%d0), %a0
-	jbsr	%a0@
-	movel	%d0,%sp@(PT_OFF_D0)	/* save the return value*/
-
-ret_from_exception:
-	btst	#5,%sp@(PT_OFF_SR)	/* check if returning to kernel*/
-	jeq	Luser_return		/* if so, skip resched, signals*/
-
-Lkernel_return:
-	RESTORE_ALL
-
-Luser_return:
-	/* only allow interrupts when we are really the last one on the*/
-	/* kernel stack, otherwise stack overflow can occur during*/
-	/* heavy interrupt load*/
-	andw	#ALLOWINT,%sr
-
-	movel	%sp,%d1			/* get thread_info pointer */
-	andl	#-THREAD_SIZE,%d1
-	movel	%d1,%a2
-1:
-	move	%a2@(TINFO_FLAGS),%d1	/* thread_info->flags */
-	jne	Lwork_to_do
-	RESTORE_ALL
-
-Lwork_to_do:
-	movel	%a2@(TINFO_FLAGS),%d1	/* thread_info->flags */
-	btst	#TIF_NEED_RESCHED,%d1
-	jne	reschedule
-
-Lsignal_return:
-	subql	#4,%sp			/* dummy return address*/
-	SAVE_SWITCH_STACK
-	pea	%sp@(SWITCH_STACK_SIZE)
-	bsrw	do_signal
-	addql	#4,%sp
-	RESTORE_SWITCH_STACK
-	addql	#4,%sp
-	jra	1b
-
-/*
- * This is the main interrupt handler, responsible for calling do_IRQ()
- */
-inthandler:
-	SAVE_ALL_INT
-	movew	%sp@(PT_OFF_FORMATVEC), %d0
-	and.l	#0x3ff, %d0
-	lsr.l   #0x02,  %d0
-
-	movel	%sp,%sp@-
-	movel	%d0,%sp@- 		/*  put vector # on stack*/
-	jbsr	do_IRQ			/*  process the IRQ*/
-3:     	addql	#8,%sp			/*  pop parameters off stack*/
-	bra	ret_from_interrupt
-
-ret_from_interrupt:
-	jeq	1f
-2:
-	RESTORE_ALL
-1:
-	moveb	%sp@(PT_OFF_SR), %d0
-	and	#7, %d0
-	jhi	2b
-	/* check if we need to do software interrupts */
-
-	movel	irq_stat+CPUSTAT_SOFTIRQ_PENDING,%d0
-	jeq	ret_from_exception
-
-	pea	ret_from_exception
-	jra	do_softirq
-
-
-/*
- * Handler for uninitialized and spurious interrupts.
- */
-bad_interrupt:
-	addql	#1,irq_err_count
-	rte
-
-/*
- * Beware - when entering resume, prev (the current task) is
- * in a0, next (the new task) is in a1, so don't change these
- * registers until their contents are no longer needed.
- */
-ENTRY(resume)
-	movel	%a0,%d1				/* save prev thread in d1 */
-	movew	%sr,%a0@(TASK_THREAD+THREAD_SR)	/* save sr */
-	SAVE_SWITCH_STACK
-	movel	%sp,%a0@(TASK_THREAD+THREAD_KSP) /* save kernel stack */
-	movel	%usp,%a3			/* save usp */
-	movel	%a3,%a0@(TASK_THREAD+THREAD_USP)
-
-	movel	%a1@(TASK_THREAD+THREAD_USP),%a3 /* restore user stack */
-	movel	%a3,%usp
-	movel	%a1@(TASK_THREAD+THREAD_KSP),%sp /* restore new thread stack */
-	RESTORE_SWITCH_STACK
-	movew	%a1@(TASK_THREAD+THREAD_SR),%sr	/* restore thread status reg */
-	rts
-
diff --git a/ANDROID_3.4.5/arch/m68k/platform/68360/head-ram.S b/ANDROID_3.4.5/arch/m68k/platform/68360/head-ram.S
deleted file mode 100644
index 8eb94fb6..00000000
--- a/ANDROID_3.4.5/arch/m68k/platform/68360/head-ram.S
+++ /dev/null
@@ -1,403 +0,0 @@
-/* arch/m68knommu/platform/68360/head-ram.S
- *
- * Startup code for Motorola 68360
- *
- * Copyright 2001 (C) SED Systems, a Division of Calian Ltd.
- * Based on: arch/m68knommu/platform/68328/pilot/crt0_rom.S
- * Based on: arch/m68knommu/platform/68360/uCquicc/crt0_rom.S, 2.0.38.1.pre7
- *           uClinux Kernel
- * Copyright (C) Michael Leslie <mleslie@lineo.com>
- * Based on: arch/m68knommu/platform/68EZ328/ucsimm/crt0_rom.S
- * Copyright (C) 1998  D. Jeff Dionne <jeff@uclinux.org>,
- *
- */
-#define ASSEMBLY
-
-.global _stext
-.global _start
-
-.global _rambase
-.global _ramvec
-.global _ramstart
-.global _ramend
-
-.global _quicc_base
-.global _periph_base
-
-#define	RAMEND                      (CONFIG_RAMBASE + CONFIG_RAMSIZE)
-#define	ROMEND                      (CONFIG_ROMBASE + CONFIG_ROMSIZE)
-
-#define REGB                        0x1000
-#define PEPAR                       (_dprbase + REGB + 0x0016)
-#define GMR                         (_dprbase + REGB + 0x0040)
-#define OR0                         (_dprbase + REGB + 0x0054)
-#define BR0                         (_dprbase + REGB + 0x0050)
-#define OR1                         (_dprbase + REGB + 0x0064)
-#define BR1                         (_dprbase + REGB + 0x0060)
-#define OR4                         (_dprbase + REGB + 0x0094)
-#define BR4                         (_dprbase + REGB + 0x0090)
-#define OR6                         (_dprbase + REGB + 0x00b4)
-#define BR6                         (_dprbase + REGB + 0x00b0)
-#define OR7                         (_dprbase + REGB + 0x00c4)
-#define BR7                         (_dprbase + REGB + 0x00c0)
-
-#define MCR                         (_dprbase + REGB + 0x0000)
-#define AVR                         (_dprbase + REGB + 0x0008)
-
-#define SYPCR                       (_dprbase + REGB + 0x0022)
-
-#define PLLCR                       (_dprbase + REGB + 0x0010)
-#define CLKOCR                      (_dprbase + REGB + 0x000C)
-#define CDVCR                       (_dprbase + REGB + 0x0014)
-
-#define BKAR                        (_dprbase + REGB + 0x0030)
-#define BKCR                        (_dprbase + REGB + 0x0034)
-#define SWIV                        (_dprbase + REGB + 0x0023)
-#define PICR                        (_dprbase + REGB + 0x0026)
-#define PITR                        (_dprbase + REGB + 0x002A)
-
-/* Define for all memory configuration */
-#define MCU_SIM_GMR                 0x00000000
-#define SIM_OR_MASK                 0x0fffffff
-
-/* Defines for chip select zero - the flash */
-#define SIM_OR0_MASK                0x20000002
-#define SIM_BR0_MASK                0x00000001
-
-
-/* Defines for chip select one - the RAM */
-#define SIM_OR1_MASK                0x10000000
-#define SIM_BR1_MASK                0x00000001
-
-#define MCU_SIM_MBAR_ADRS           0x0003ff00
-#define MCU_SIM_MBAR_BA_MASK        0xfffff000
-#define MCU_SIM_MBAR_AS_MASK        0x00000001
-
-#define MCU_SIM_PEPAR               0x00B4
-    
-#define MCU_DISABLE_INTRPTS         0x2700
-#define MCU_SIM_AVR                 0x00
-    
-#define MCU_SIM_MCR                 0x00005cff
-
-#define MCU_SIM_CLKOCR              0x00
-#define MCU_SIM_PLLCR               0x8000
-#define MCU_SIM_CDVCR               0x0000
-
-#define MCU_SIM_SYPCR               0x0000
-#define MCU_SIM_SWIV                0x00
-#define MCU_SIM_PICR                0x0000
-#define MCU_SIM_PITR                0x0000
-
-
-#include <asm/m68360_regs.h>
-
-	
-/*
- * By the time this RAM specific code begins to execute, DPRAM
- * and DRAM should already be mapped and accessible.
- */
-
-	.text
-_start:
-_stext:
-	nop
-	ori.w	#MCU_DISABLE_INTRPTS, %sr	/* disable interrupts: */
-	/* We should not need to setup the boot stack the reset should do it. */
-	movea.l	#RAMEND, %sp			/*set up stack at the end of DRAM:*/
-
-set_mbar_register:
-	moveq.l	#0x07, %d1			/* Setup MBAR */
-	movec	%d1, %dfc
-
-	lea.l	MCU_SIM_MBAR_ADRS, %a0
-	move.l	#_dprbase, %d0
-	andi.l	#MCU_SIM_MBAR_BA_MASK, %d0
-	ori.l	#MCU_SIM_MBAR_AS_MASK, %d0
-	moves.l	%d0, %a0@
-
-	moveq.l	#0x05, %d1
-	movec.l	%d1, %dfc
-
-	/* Now we can begin to access registers in DPRAM */
-
-set_sim_mcr:
-	/* Set Module Configuration Register */
-	move.l	#MCU_SIM_MCR, MCR
-
-	/* to do:	Determine cause of reset */
-
-	/*
-	 *       configure system clock MC68360 p. 6-40
-	 *       (value +1)*osc/128 = system clock
-	 */
-set_sim_clock:
-	move.w	#MCU_SIM_PLLCR, PLLCR
-	move.b	#MCU_SIM_CLKOCR, CLKOCR
-	move.w	#MCU_SIM_CDVCR, CDVCR
-
-	/* Wait for the PLL to settle */
-	move.w	#16384, %d0
-pll_settle_wait:
-	subi.w	#1, %d0
-	bne	pll_settle_wait
-
-	/* Setup the system protection register, and watchdog timer register */
-	move.b	#MCU_SIM_SWIV, SWIV
-	move.w	#MCU_SIM_PICR, PICR
-	move.w	#MCU_SIM_PITR, PITR
-	move.w	#MCU_SIM_SYPCR, SYPCR
-
-	/* Clear DPRAM - system + parameter */
-	movea.l	#_dprbase, %a0
-	movea.l	#_dprbase+0x2000, %a1
-
-	/* Copy 0 to %a0 until %a0 == %a1 */
-clear_dpram:
-	movel	#0, %a0@+
-	cmpal	%a0, %a1
-	bhi	clear_dpram
-
-configure_memory_controller:    
-	/* Set up Global Memory Register (GMR) */
-	move.l	#MCU_SIM_GMR, %d0
-	move.l	%d0, GMR
-
-configure_chip_select_0:
-	move.l	#RAMEND, %d0
-	subi.l	#__ramstart, %d0
-	subq.l	#0x01, %d0
-	eori.l	#SIM_OR_MASK, %d0
-	ori.l	#SIM_OR0_MASK, %d0
-	move.l	%d0, OR0
-
-	move.l	#__ramstart, %d0
-	ori.l	#SIM_BR0_MASK, %d0
-	move.l	%d0, BR0
-
-configure_chip_select_1:
-	move.l	#ROMEND, %d0
-	subi.l	#__rom_start, %d0
-	subq.l	#0x01, %d0
-	eori.l	#SIM_OR_MASK, %d0
-	ori.l	#SIM_OR1_MASK, %d0
-	move.l	%d0, OR1
-
-	move.l	#__rom_start, %d0
-	ori.l	#SIM_BR1_MASK, %d0
-	move.l	%d0, BR1
-
-	move.w	#MCU_SIM_PEPAR, PEPAR 
-
-	/* point to vector table: */
-	move.l	#_romvec, %a0
-	move.l	#_ramvec, %a1
-copy_vectors:
-	move.l	%a0@, %d0
-	move.l	%d0, %a1@
-	move.l	%a0@, %a1@
-	addq.l	#0x04, %a0
-	addq.l	#0x04, %a1
-	cmp.l	#_start, %a0
-	blt	copy_vectors
-
-	move.l	#_ramvec, %a1
-	movec	%a1, %vbr
-
-
-	/* Copy data segment from ROM to RAM */
-	moveal	#_stext, %a0
-	moveal	#_sdata, %a1
-	moveal	#_edata, %a2
-
-	/* Copy %a0 to %a1 until %a1 == %a2 */
-LD1:
-	move.l	%a0@, %d0
-	addq.l	#0x04, %a0
-	move.l	%d0, %a1@
-	addq.l	#0x04, %a1
-	cmp.l	#_edata, %a1
-	blt     LD1
-
-	moveal	#_sbss, %a0
-	moveal	#_ebss, %a1
-
-	/* Copy 0 to %a0 until %a0 == %a1 */
-L1:
-	movel	#0, %a0@+
-	cmpal	%a0, %a1
-	bhi	L1
-
-load_quicc:
-	move.l	#_dprbase, _quicc_base
-
-store_ram_size:
-	/* Set ram size information */
-	move.l	#_sdata, _rambase
-	move.l	#_ebss, _ramstart
-	move.l	#RAMEND, %d0
-	sub.l	#0x1000, %d0			/* Reserve 4K for stack space.*/
-	move.l	%d0, _ramend			/* Different from RAMEND.*/
-
-	pea	0
-	pea	env
-	pea	%sp@(4)
-	pea	0
-
-	lea	init_thread_union, %a2
-	lea	0x2000(%a2), %sp
-
-lp:
-	jsr	start_kernel
-
-_exit:
-	jmp	_exit
-
-
-	.data
-	.align 4
-env:
-	.long	0
-_quicc_base:
-	.long	0
-_periph_base:
-	.long	0
-_ramvec:
-	.long   0
-_rambase:
-	.long   0
-_ramstart:
-	.long   0
-_ramend:
-	.long   0
-_dprbase:
-	.long	0xffffe000
-
-	.text
-
-    /*
-     * These are the exception vectors at boot up, they are copied into RAM
-     * and then overwritten as needed.
-     */
- 
-.section ".data..initvect","awx"
-    .long   RAMEND	/* Reset: Initial Stack Pointer                 - 0.  */
-    .long   _start      /* Reset: Initial Program Counter               - 1.  */
-    .long   buserr      /* Bus Error                                    - 2.  */
-    .long   trap        /* Address Error                                - 3.  */
-    .long   trap        /* Illegal Instruction                          - 4.  */
-    .long   trap        /* Divide by zero                               - 5.  */
-    .long   trap        /* CHK, CHK2 Instructions                       - 6.  */
-    .long   trap        /* TRAPcc, TRAPV Instructions                   - 7.  */
-    .long   trap        /* Privilege Violation                          - 8.  */
-    .long   trap        /* Trace                                        - 9.  */
-    .long   trap        /* Line 1010 Emulator                           - 10. */
-    .long   trap        /* Line 1111 Emualtor                           - 11. */
-    .long   trap        /* Harware Breakpoint                           - 12. */
-    .long   trap        /* (Reserved for Coprocessor Protocol Violation)- 13. */
-    .long   trap        /* Format Error                                 - 14. */
-    .long   trap        /* Uninitialized Interrupt                      - 15. */
-    .long   trap        /* (Unassigned, Reserver)                       - 16. */
-    .long   trap        /* (Unassigned, Reserver)                       - 17. */
-    .long   trap        /* (Unassigned, Reserver)                       - 18. */
-    .long   trap        /* (Unassigned, Reserver)                       - 19. */
-    .long   trap        /* (Unassigned, Reserver)                       - 20. */
-    .long   trap        /* (Unassigned, Reserver)                       - 21. */
-    .long   trap        /* (Unassigned, Reserver)                       - 22. */
-    .long   trap        /* (Unassigned, Reserver)                       - 23. */
-    .long   trap        /* Spurious Interrupt                           - 24. */
-    .long   trap        /* Level 1 Interrupt Autovector                 - 25. */
-    .long   trap        /* Level 2 Interrupt Autovector                 - 26. */
-    .long   trap        /* Level 3 Interrupt Autovector                 - 27. */
-    .long   trap        /* Level 4 Interrupt Autovector                 - 28. */
-    .long   trap        /* Level 5 Interrupt Autovector                 - 29. */
-    .long   trap        /* Level 6 Interrupt Autovector                 - 30. */
-    .long   trap        /* Level 7 Interrupt Autovector                 - 31. */
-    .long   system_call /* Trap Instruction Vectors 0                   - 32. */
-    .long   trap        /* Trap Instruction Vectors 1                   - 33. */
-    .long   trap        /* Trap Instruction Vectors 2                   - 34. */
-    .long   trap        /* Trap Instruction Vectors 3                   - 35. */
-    .long   trap        /* Trap Instruction Vectors 4                   - 36. */
-    .long   trap        /* Trap Instruction Vectors 5                   - 37. */
-    .long   trap        /* Trap Instruction Vectors 6                   - 38. */
-    .long   trap        /* Trap Instruction Vectors 7                   - 39. */
-    .long   trap        /* Trap Instruction Vectors 8                   - 40. */
-    .long   trap        /* Trap Instruction Vectors 9                   - 41. */
-    .long   trap        /* Trap Instruction Vectors 10                  - 42. */
-    .long   trap        /* Trap Instruction Vectors 11                  - 43. */
-    .long   trap        /* Trap Instruction Vectors 12                  - 44. */
-    .long   trap        /* Trap Instruction Vectors 13                  - 45. */
-    .long   trap        /* Trap Instruction Vectors 14                  - 46. */
-    .long   trap        /* Trap Instruction Vectors 15                  - 47. */
-    .long   0           /* (Reserved for Coprocessor)                   - 48. */
-    .long   0           /* (Reserved for Coprocessor)                   - 49. */
-    .long   0           /* (Reserved for Coprocessor)                   - 50. */
-    .long   0           /* (Reserved for Coprocessor)                   - 51. */
-    .long   0           /* (Reserved for Coprocessor)                   - 52. */
-    .long   0           /* (Reserved for Coprocessor)                   - 53. */
-    .long   0           /* (Reserved for Coprocessor)                   - 54. */
-    .long   0           /* (Reserved for Coprocessor)                   - 55. */
-    .long   0           /* (Reserved for Coprocessor)                   - 56. */
-    .long   0           /* (Reserved for Coprocessor)                   - 57. */
-    .long   0           /* (Reserved for Coprocessor)                   - 58. */
-    .long   0           /* (Unassigned, Reserved)                       - 59. */
-    .long   0           /* (Unassigned, Reserved)                       - 60. */
-    .long   0           /* (Unassigned, Reserved)                       - 61. */
-    .long   0           /* (Unassigned, Reserved)                       - 62. */
-    .long   0           /* (Unassigned, Reserved)                       - 63. */
-    /*                  The assignment of these vectors to the CPM is         */
-    /*                  dependent on the configuration of the CPM vba         */
-    /*                          fields.                                       */
-    .long   0           /* (User-Defined Vectors 1) CPM Error           - 64. */
-    .long   0           /* (User-Defined Vectors 2) CPM Parallel IO PC11- 65. */
-    .long   0           /* (User-Defined Vectors 3) CPM Parallel IO PC10- 66. */
-    .long   0           /* (User-Defined Vectors 4) CPM SMC2 / PIP      - 67. */
-    .long   0           /* (User-Defined Vectors 5) CPM SMC1            - 68. */
-    .long   0           /* (User-Defined Vectors 6) CPM SPI             - 69. */
-    .long   0           /* (User-Defined Vectors 7) CPM Parallel IO PC9 - 70. */
-    .long   0           /* (User-Defined Vectors 8) CPM Timer 4         - 71. */
-    .long   0           /* (User-Defined Vectors 9) CPM Reserved        - 72. */
-    .long   0           /* (User-Defined Vectors 10) CPM Parallel IO PC8- 73. */
-    .long   0           /* (User-Defined Vectors 11) CPM Parallel IO PC7- 74. */
-    .long   0           /* (User-Defined Vectors 12) CPM Parallel IO PC6- 75. */
-    .long   0           /* (User-Defined Vectors 13) CPM Timer 3        - 76. */
-    .long   0           /* (User-Defined Vectors 14) CPM Reserved       - 77. */
-    .long   0           /* (User-Defined Vectors 15) CPM Parallel IO PC5- 78. */
-    .long   0           /* (User-Defined Vectors 16) CPM Parallel IO PC4- 79. */
-    .long   0           /* (User-Defined Vectors 17) CPM Reserved       - 80. */
-    .long   0           /* (User-Defined Vectors 18) CPM RISC Timer Tbl - 81. */
-    .long   0           /* (User-Defined Vectors 19) CPM Timer 2        - 82. */
-    .long   0           /* (User-Defined Vectors 21) CPM Reserved       - 83. */
-    .long   0           /* (User-Defined Vectors 22) CPM IDMA2          - 84. */
-    .long   0           /* (User-Defined Vectors 23) CPM IDMA1          - 85. */
-    .long   0           /* (User-Defined Vectors 24) CPM SDMA Bus Err   - 86. */
-    .long   0           /* (User-Defined Vectors 25) CPM Parallel IO PC3- 87. */
-    .long   0           /* (User-Defined Vectors 26) CPM Parallel IO PC2- 88. */
-    .long   0           /* (User-Defined Vectors 27) CPM Timer 1        - 89. */
-    .long   0           /* (User-Defined Vectors 28) CPM Parallel IO PC1- 90. */
-    .long   0           /* (User-Defined Vectors 29) CPM SCC 4          - 91. */
-    .long   0           /* (User-Defined Vectors 30) CPM SCC 3          - 92. */
-    .long   0           /* (User-Defined Vectors 31) CPM SCC 2          - 93. */
-    .long   0           /* (User-Defined Vectors 32) CPM SCC 1          - 94. */
-    .long   0           /* (User-Defined Vectors 33) CPM Parallel IO PC0- 95. */
-    /*                  I don't think anything uses the vectors after here.   */
-    .long   0           /* (User-Defined Vectors 34)                    - 96. */
-    .long   0,0,0,0,0               /* (User-Defined Vectors 35  -  39). */
-    .long   0,0,0,0,0,0,0,0,0,0     /* (User-Defined Vectors 40  -  49). */
-    .long   0,0,0,0,0,0,0,0,0,0     /* (User-Defined Vectors 50  -  59). */
-    .long   0,0,0,0,0,0,0,0,0,0     /* (User-Defined Vectors 60  -  69). */
-    .long   0,0,0,0,0,0,0,0,0,0     /* (User-Defined Vectors 70  -  79). */
-    .long   0,0,0,0,0,0,0,0,0,0     /* (User-Defined Vectors 80  -  89). */
-    .long   0,0,0,0,0,0,0,0,0,0     /* (User-Defined Vectors 90  -  99). */
-    .long   0,0,0,0,0,0,0,0,0,0     /* (User-Defined Vectors 100 - 109). */
-    .long   0,0,0,0,0,0,0,0,0,0     /* (User-Defined Vectors 110 - 119). */
-    .long   0,0,0,0,0,0,0,0,0,0     /* (User-Defined Vectors 120 - 129). */
-    .long   0,0,0,0,0,0,0,0,0,0     /* (User-Defined Vectors 130 - 139). */
-    .long   0,0,0,0,0,0,0,0,0,0     /* (User-Defined Vectors 140 - 149). */
-    .long   0,0,0,0,0,0,0,0,0,0     /* (User-Defined Vectors 150 - 159). */
-    .long   0,0,0,0,0,0,0,0,0,0     /* (User-Defined Vectors 160 - 169). */
-    .long   0,0,0,0,0,0,0,0,0,0     /* (User-Defined Vectors 170 - 179). */
-    .long   0,0,0,0,0,0,0,0,0,0     /* (User-Defined Vectors 180 - 189). */
-    .long   0,0,0                   /* (User-Defined Vectors 190 - 192). */
-.text
-ignore: rte
diff --git a/ANDROID_3.4.5/arch/m68k/platform/68360/head-rom.S b/ANDROID_3.4.5/arch/m68k/platform/68360/head-rom.S
deleted file mode 100644
index 97510e55..00000000
--- a/ANDROID_3.4.5/arch/m68k/platform/68360/head-rom.S
+++ /dev/null
@@ -1,414 +0,0 @@
-/* arch/m68knommu/platform/68360/head-rom.S
- *
- * Startup code for Motorola 68360
- *
- * Copyright (C) SED Systems, a Division of Calian Ltd.
- * Based on: arch/m68knommu/platform/68328/pilot/crt0_rom.S
- * Based on: arch/m68knommu/platform/68360/uCquicc/crt0_rom.S, 2.0.38.1.pre7
- *           uClinux Kernel
- * Copyright (C) Michael Leslie <mleslie@lineo.com>
- * Based on: arch/m68knommu/platform/68EZ328/ucsimm/crt0_rom.S
- * Copyright (C) 1998  D. Jeff Dionne <jeff@uclinux.org>,
- *
- */
-
-.global _stext
-.global _sbss
-.global _start
-
-.global _rambase
-.global _ramvec
-.global _ramstart
-.global _ramend
-
-.global _quicc_base
-.global _periph_base
-
-#define	RAMEND                      (CONFIG_RAMBASE + CONFIG_RAMSIZE)
-
-#define REGB                        0x1000
-#define PEPAR                       (_dprbase + REGB + 0x0016)
-#define GMR                         (_dprbase + REGB + 0x0040)
-#define OR0                         (_dprbase + REGB + 0x0054)
-#define BR0                         (_dprbase + REGB + 0x0050)
-
-#define OR1                         (_dprbase + REGB + 0x0064)
-#define BR1                         (_dprbase + REGB + 0x0060)
-
-#define OR2                         (_dprbase + REGB + 0x0074)
-#define BR2                         (_dprbase + REGB + 0x0070)
-
-#define OR3                         (_dprbase + REGB + 0x0084)
-#define BR3                         (_dprbase + REGB + 0x0080)
-
-#define OR4                         (_dprbase + REGB + 0x0094)
-#define BR4                         (_dprbase + REGB + 0x0090)
-
-#define OR5                         (_dprbase + REGB + 0x00A4)
-#define BR5                         (_dprbase + REGB + 0x00A0)
-
-#define OR6                         (_dprbase + REGB + 0x00b4)
-#define BR6                         (_dprbase + REGB + 0x00b0)
-
-#define OR7                         (_dprbase + REGB + 0x00c4)
-#define BR7                         (_dprbase + REGB + 0x00c0)
-
-#define MCR                         (_dprbase + REGB + 0x0000)
-#define AVR                         (_dprbase + REGB + 0x0008)
-
-#define SYPCR                       (_dprbase + REGB + 0x0022)
-
-#define PLLCR                       (_dprbase + REGB + 0x0010)
-#define CLKOCR                      (_dprbase + REGB + 0x000C)
-#define CDVCR                       (_dprbase + REGB + 0x0014)
-
-#define BKAR                        (_dprbase + REGB + 0x0030)
-#define BKCR                        (_dprbase + REGB + 0x0034)
-#define SWIV                        (_dprbase + REGB + 0x0023)
-#define PICR                        (_dprbase + REGB + 0x0026)
-#define PITR                        (_dprbase + REGB + 0x002A)
-
-/* Define for all memory configuration */
-#define MCU_SIM_GMR                 0x00000000
-#define SIM_OR_MASK                 0x0fffffff
-
-/* Defines for chip select zero - the flash */
-#define SIM_OR0_MASK                0x20000000
-#define SIM_BR0_MASK                0x00000001
-
-/* Defines for chip select one - the RAM */
-#define SIM_OR1_MASK                0x10000000
-#define SIM_BR1_MASK                0x00000001
-
-#define MCU_SIM_MBAR_ADRS           0x0003ff00
-#define MCU_SIM_MBAR_BA_MASK        0xfffff000
-#define MCU_SIM_MBAR_AS_MASK        0x00000001
-
-#define MCU_SIM_PEPAR               0x00B4
-    
-#define MCU_DISABLE_INTRPTS         0x2700
-#define MCU_SIM_AVR                 0x00
-    
-#define MCU_SIM_MCR                 0x00005cff
-
-#define MCU_SIM_CLKOCR              0x00
-#define MCU_SIM_PLLCR               0x8000
-#define MCU_SIM_CDVCR               0x0000
-
-#define MCU_SIM_SYPCR               0x0000
-#define MCU_SIM_SWIV                0x00
-#define MCU_SIM_PICR                0x0000
-#define MCU_SIM_PITR                0x0000
-
-
-#include <asm/m68360_regs.h>
-
-	
-/*
- * By the time this RAM specific code begins to execute, DPRAM
- * and DRAM should already be mapped and accessible.
- */
-
-	.text
-_start:
-_stext:
-	nop
-	ori.w	#MCU_DISABLE_INTRPTS, %sr	/* disable interrupts: */
-	/* We should not need to setup the boot stack the reset should do it. */
-	movea.l	#RAMEND, %sp		/* set up stack at the end of DRAM:*/
-
-
-set_mbar_register:
-	moveq.l	#0x07, %d1			/* Setup MBAR */
-	movec	%d1, %dfc
-
-	lea.l	MCU_SIM_MBAR_ADRS, %a0
-	move.l	#_dprbase, %d0
-	andi.l	#MCU_SIM_MBAR_BA_MASK, %d0
-	ori.l	#MCU_SIM_MBAR_AS_MASK, %d0
-	moves.l	%d0, %a0@
-
-	moveq.l	#0x05, %d1
-	movec.l	%d1, %dfc
-
-	/* Now we can begin to access registers in DPRAM */
-
-set_sim_mcr:
-	/* Set Module Configuration Register */
-	move.l	#MCU_SIM_MCR, MCR
-
-	/* to do:	Determine cause of reset */
-
-	/*
-	 *	configure system clock MC68360 p. 6-40
-	 *	(value +1)*osc/128 = system clock
-	 *                    or
-	 *	(value + 1)*osc = system clock
-	 *	You do not need to divide the oscillator by 128 unless you want to.
-	 */
-set_sim_clock:
-	move.w	#MCU_SIM_PLLCR, PLLCR
-	move.b	#MCU_SIM_CLKOCR, CLKOCR
-	move.w	#MCU_SIM_CDVCR, CDVCR
-
-	/* Wait for the PLL to settle */
-	move.w	#16384, %d0
-pll_settle_wait:
-	subi.w	#1, %d0
-	bne	pll_settle_wait
-
-	/* Setup the system protection register, and watchdog timer register */
-	move.b	#MCU_SIM_SWIV, SWIV
-	move.w	#MCU_SIM_PICR, PICR
-	move.w	#MCU_SIM_PITR, PITR
-	move.w	#MCU_SIM_SYPCR, SYPCR
-
-	/* Clear DPRAM - system + parameter */
-	movea.l	#_dprbase, %a0
-	movea.l	#_dprbase+0x2000, %a1
-
-	/* Copy 0 to %a0 until %a0 == %a1 */
-clear_dpram:
-	movel	#0, %a0@+
-	cmpal	%a0, %a1
-	bhi	clear_dpram
-
-configure_memory_controller:    
-	/* Set up Global Memory Register (GMR) */
-	move.l	#MCU_SIM_GMR, %d0
-	move.l	%d0, GMR
-
-configure_chip_select_0:
-	move.l	#0x00400000, %d0
-	subq.l	#0x01, %d0
-	eori.l	#SIM_OR_MASK, %d0
-	ori.l	#SIM_OR0_MASK, %d0
-	move.l	%d0, OR0
-
-	move.l	#__rom_start, %d0
-	ori.l	#SIM_BR0_MASK, %d0
-	move.l	%d0, BR0
-
-	move.l	#0x0, BR1
-	move.l	#0x0, BR2
-	move.l	#0x0, BR3
-	move.l	#0x0, BR4
-	move.l	#0x0, BR5
-	move.l	#0x0, BR6
-	move.l	#0x0, BR7
-
-	move.w	#MCU_SIM_PEPAR, PEPAR 
-
-	/* point to vector table: */
-	move.l	#_romvec, %a0
-	move.l	#_ramvec, %a1
-copy_vectors:
-	move.l	%a0@, %d0
-	move.l	%d0, %a1@
-	move.l	%a0@, %a1@
-	addq.l	#0x04, %a0
-	addq.l	#0x04, %a1
-	cmp.l	#_start, %a0
-	blt	copy_vectors
-
-	move.l	#_ramvec, %a1
-	movec	%a1, %vbr
-
-
-	/* Copy data segment from ROM to RAM */
-	moveal	#_etext, %a0
-	moveal	#_sdata, %a1
-	moveal	#_edata, %a2
-
-	/* Copy %a0 to %a1 until %a1 == %a2 */
-LD1:
-	move.l	%a0@, %d0
-	addq.l	#0x04, %a0
-	move.l	%d0, %a1@
-	addq.l	#0x04, %a1
-	cmp.l	#_edata, %a1
-	blt	LD1
-
-	moveal	#_sbss, %a0
-	moveal	#_ebss, %a1
-
-	/* Copy 0 to %a0 until %a0 == %a1 */
-L1:
-	movel	#0, %a0@+
-	cmpal	%a0, %a1
-	bhi	L1
-
-load_quicc:
-	move.l	#_dprbase, _quicc_base
-
-store_ram_size:
-	/* Set ram size information */
-	move.l	#_sdata, _rambase
-	move.l	#_ebss, _ramstart
-	move.l	#RAMEND, %d0
-	sub.l	#0x1000, %d0			/* Reserve 4K for stack space.*/
-	move.l	%d0, _ramend			/* Different from RAMEND.*/
-
-	pea	0
-	pea	env
-	pea	%sp@(4)
-	pea	0
-
-	lea	init_thread_union, %a2
-	lea	0x2000(%a2), %sp
-
-lp:
-	jsr	start_kernel
-
-_exit:
-	jmp	_exit
-
-
-	.data
-	.align 4
-env:
-	.long	0
-_quicc_base:
-	.long	0
-_periph_base:
-	.long	0
-_ramvec:
-	.long   0
-_rambase:
-	.long   0
-_ramstart:
-	.long   0
-_ramend:
-	.long   0
-_dprbase:
-	.long	0xffffe000
-
-
-	.text
-
-    /*
-     * These are the exception vectors at boot up, they are copied into RAM
-     * and then overwritten as needed.
-     */
- 
-.section ".data..initvect","awx"
-    .long   RAMEND	/* Reset: Initial Stack Pointer                 - 0.  */
-    .long   _start      /* Reset: Initial Program Counter               - 1.  */
-    .long   buserr      /* Bus Error                                    - 2.  */
-    .long   trap        /* Address Error                                - 3.  */
-    .long   trap        /* Illegal Instruction                          - 4.  */
-    .long   trap        /* Divide by zero                               - 5.  */
-    .long   trap        /* CHK, CHK2 Instructions                       - 6.  */
-    .long   trap        /* TRAPcc, TRAPV Instructions                   - 7.  */
-    .long   trap        /* Privilege Violation                          - 8.  */
-    .long   trap        /* Trace                                        - 9.  */
-    .long   trap        /* Line 1010 Emulator                           - 10. */
-    .long   trap        /* Line 1111 Emualtor                           - 11. */
-    .long   trap        /* Harware Breakpoint                           - 12. */
-    .long   trap        /* (Reserved for Coprocessor Protocol Violation)- 13. */
-    .long   trap        /* Format Error                                 - 14. */
-    .long   trap        /* Uninitialized Interrupt                      - 15. */
-    .long   trap        /* (Unassigned, Reserver)                       - 16. */
-    .long   trap        /* (Unassigned, Reserver)                       - 17. */
-    .long   trap        /* (Unassigned, Reserver)                       - 18. */
-    .long   trap        /* (Unassigned, Reserver)                       - 19. */
-    .long   trap        /* (Unassigned, Reserver)                       - 20. */
-    .long   trap        /* (Unassigned, Reserver)                       - 21. */
-    .long   trap        /* (Unassigned, Reserver)                       - 22. */
-    .long   trap        /* (Unassigned, Reserver)                       - 23. */
-    .long   trap        /* Spurious Interrupt                           - 24. */
-    .long   trap        /* Level 1 Interrupt Autovector                 - 25. */
-    .long   trap        /* Level 2 Interrupt Autovector                 - 26. */
-    .long   trap        /* Level 3 Interrupt Autovector                 - 27. */
-    .long   trap        /* Level 4 Interrupt Autovector                 - 28. */
-    .long   trap        /* Level 5 Interrupt Autovector                 - 29. */
-    .long   trap        /* Level 6 Interrupt Autovector                 - 30. */
-    .long   trap        /* Level 7 Interrupt Autovector                 - 31. */
-    .long   system_call /* Trap Instruction Vectors 0                   - 32. */
-    .long   trap        /* Trap Instruction Vectors 1                   - 33. */
-    .long   trap        /* Trap Instruction Vectors 2                   - 34. */
-    .long   trap        /* Trap Instruction Vectors 3                   - 35. */
-    .long   trap        /* Trap Instruction Vectors 4                   - 36. */
-    .long   trap        /* Trap Instruction Vectors 5                   - 37. */
-    .long   trap        /* Trap Instruction Vectors 6                   - 38. */
-    .long   trap        /* Trap Instruction Vectors 7                   - 39. */
-    .long   trap        /* Trap Instruction Vectors 8                   - 40. */
-    .long   trap        /* Trap Instruction Vectors 9                   - 41. */
-    .long   trap        /* Trap Instruction Vectors 10                  - 42. */
-    .long   trap        /* Trap Instruction Vectors 11                  - 43. */
-    .long   trap        /* Trap Instruction Vectors 12                  - 44. */
-    .long   trap        /* Trap Instruction Vectors 13                  - 45. */
-    .long   trap        /* Trap Instruction Vectors 14                  - 46. */
-    .long   trap        /* Trap Instruction Vectors 15                  - 47. */
-    .long   0           /* (Reserved for Coprocessor)                   - 48. */
-    .long   0           /* (Reserved for Coprocessor)                   - 49. */
-    .long   0           /* (Reserved for Coprocessor)                   - 50. */
-    .long   0           /* (Reserved for Coprocessor)                   - 51. */
-    .long   0           /* (Reserved for Coprocessor)                   - 52. */
-    .long   0           /* (Reserved for Coprocessor)                   - 53. */
-    .long   0           /* (Reserved for Coprocessor)                   - 54. */
-    .long   0           /* (Reserved for Coprocessor)                   - 55. */
-    .long   0           /* (Reserved for Coprocessor)                   - 56. */
-    .long   0           /* (Reserved for Coprocessor)                   - 57. */
-    .long   0           /* (Reserved for Coprocessor)                   - 58. */
-    .long   0           /* (Unassigned, Reserved)                       - 59. */
-    .long   0           /* (Unassigned, Reserved)                       - 60. */
-    .long   0           /* (Unassigned, Reserved)                       - 61. */
-    .long   0           /* (Unassigned, Reserved)                       - 62. */
-    .long   0           /* (Unassigned, Reserved)                       - 63. */
-    /*                  The assignment of these vectors to the CPM is         */
-    /*                  dependent on the configuration of the CPM vba         */
-    /*                          fields.                                       */
-    .long   0           /* (User-Defined Vectors 1) CPM Error           - 64. */
-    .long   0           /* (User-Defined Vectors 2) CPM Parallel IO PC11- 65. */
-    .long   0           /* (User-Defined Vectors 3) CPM Parallel IO PC10- 66. */
-    .long   0           /* (User-Defined Vectors 4) CPM SMC2 / PIP      - 67. */
-    .long   0           /* (User-Defined Vectors 5) CPM SMC1            - 68. */
-    .long   0           /* (User-Defined Vectors 6) CPM SPI             - 69. */
-    .long   0           /* (User-Defined Vectors 7) CPM Parallel IO PC9 - 70. */
-    .long   0           /* (User-Defined Vectors 8) CPM Timer 4         - 71. */
-    .long   0           /* (User-Defined Vectors 9) CPM Reserved        - 72. */
-    .long   0           /* (User-Defined Vectors 10) CPM Parallel IO PC8- 73. */
-    .long   0           /* (User-Defined Vectors 11) CPM Parallel IO PC7- 74. */
-    .long   0           /* (User-Defined Vectors 12) CPM Parallel IO PC6- 75. */
-    .long   0           /* (User-Defined Vectors 13) CPM Timer 3        - 76. */
-    .long   0           /* (User-Defined Vectors 14) CPM Reserved       - 77. */
-    .long   0           /* (User-Defined Vectors 15) CPM Parallel IO PC5- 78. */
-    .long   0           /* (User-Defined Vectors 16) CPM Parallel IO PC4- 79. */
-    .long   0           /* (User-Defined Vectors 17) CPM Reserved       - 80. */
-    .long   0           /* (User-Defined Vectors 18) CPM RISC Timer Tbl - 81. */
-    .long   0           /* (User-Defined Vectors 19) CPM Timer 2        - 82. */
-    .long   0           /* (User-Defined Vectors 21) CPM Reserved       - 83. */
-    .long   0           /* (User-Defined Vectors 22) CPM IDMA2          - 84. */
-    .long   0           /* (User-Defined Vectors 23) CPM IDMA1          - 85. */
-    .long   0           /* (User-Defined Vectors 24) CPM SDMA Bus Err   - 86. */
-    .long   0           /* (User-Defined Vectors 25) CPM Parallel IO PC3- 87. */
-    .long   0           /* (User-Defined Vectors 26) CPM Parallel IO PC2- 88. */
-    .long   0           /* (User-Defined Vectors 27) CPM Timer 1        - 89. */
-    .long   0           /* (User-Defined Vectors 28) CPM Parallel IO PC1- 90. */
-    .long   0           /* (User-Defined Vectors 29) CPM SCC 4          - 91. */
-    .long   0           /* (User-Defined Vectors 30) CPM SCC 3          - 92. */
-    .long   0           /* (User-Defined Vectors 31) CPM SCC 2          - 93. */
-    .long   0           /* (User-Defined Vectors 32) CPM SCC 1          - 94. */
-    .long   0           /* (User-Defined Vectors 33) CPM Parallel IO PC0- 95. */
-    /*                  I don't think anything uses the vectors after here.   */
-    .long   0           /* (User-Defined Vectors 34)                    - 96. */
-    .long   0,0,0,0,0               /* (User-Defined Vectors 35  -  39). */
-    .long   0,0,0,0,0,0,0,0,0,0     /* (User-Defined Vectors 40  -  49). */
-    .long   0,0,0,0,0,0,0,0,0,0     /* (User-Defined Vectors 50  -  59). */
-    .long   0,0,0,0,0,0,0,0,0,0     /* (User-Defined Vectors 60  -  69). */
-    .long   0,0,0,0,0,0,0,0,0,0     /* (User-Defined Vectors 70  -  79). */
-    .long   0,0,0,0,0,0,0,0,0,0     /* (User-Defined Vectors 80  -  89). */
-    .long   0,0,0,0,0,0,0,0,0,0     /* (User-Defined Vectors 90  -  99). */
-    .long   0,0,0,0,0,0,0,0,0,0     /* (User-Defined Vectors 100 - 109). */
-    .long   0,0,0,0,0,0,0,0,0,0     /* (User-Defined Vectors 110 - 119). */
-    .long   0,0,0,0,0,0,0,0,0,0     /* (User-Defined Vectors 120 - 129). */
-    .long   0,0,0,0,0,0,0,0,0,0     /* (User-Defined Vectors 130 - 139). */
-    .long   0,0,0,0,0,0,0,0,0,0     /* (User-Defined Vectors 140 - 149). */
-    .long   0,0,0,0,0,0,0,0,0,0     /* (User-Defined Vectors 150 - 159). */
-    .long   0,0,0,0,0,0,0,0,0,0     /* (User-Defined Vectors 160 - 169). */
-    .long   0,0,0,0,0,0,0,0,0,0     /* (User-Defined Vectors 170 - 179). */
-    .long   0,0,0,0,0,0,0,0,0,0     /* (User-Defined Vectors 180 - 189). */
-    .long   0,0,0                   /* (User-Defined Vectors 190 - 192). */
-.text
-ignore: rte
diff --git a/ANDROID_3.4.5/arch/m68k/platform/68360/ints.c b/ANDROID_3.4.5/arch/m68k/platform/68360/ints.c
deleted file mode 100644
index 8cd42692..00000000
--- a/ANDROID_3.4.5/arch/m68k/platform/68360/ints.c
+++ /dev/null
@@ -1,138 +0,0 @@
-/*
- * linux/arch/$(ARCH)/platform/$(PLATFORM)/ints.c
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file COPYING in the main directory of this archive
- * for more details.
- *
- * Copyright (c) 2000  Michael Leslie <mleslie@lineo.com>
- * Copyright (c) 1996 Roman Zippel
- * Copyright (c) 1999 D. Jeff Dionne <jeff@uclinux.org>
- */
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <asm/traps.h>
-#include <asm/machdep.h>
-#include <asm/m68360.h>
-
-/* from quicc/commproc.c: */
-extern QUICC *pquicc;
-extern void cpm_interrupt_init(void);
-
-#define INTERNAL_IRQS (96)
-
-/* assembler routines */
-asmlinkage void system_call(void);
-asmlinkage void buserr(void);
-asmlinkage void trap(void);
-asmlinkage void bad_interrupt(void);
-asmlinkage void inthandler(void);
-
-static void intc_irq_unmask(struct irq_data *d)
-{
-	pquicc->intr_cimr |= (1 << d->irq);
-}
-
-static void intc_irq_mask(struct irq_data *d)
-{
-	pquicc->intr_cimr &= ~(1 << d->irq);
-}
-
-static void intc_irq_ack(struct irq_data *d)
-{
-	pquicc->intr_cisr = (1 << d->irq);
-}
-
-static struct irq_chip intc_irq_chip = {
-	.name		= "M68K-INTC",
-	.irq_mask	= intc_irq_mask,
-	.irq_unmask	= intc_irq_unmask,
-	.irq_ack	= intc_irq_ack,
-};
-
-/*
- * This function should be called during kernel startup to initialize
- * the vector table.
- */
-void __init trap_init(void)
-{
-	int vba = (CPM_VECTOR_BASE<<4);
-
-	/* set up the vectors */
-	_ramvec[2] = buserr;
-	_ramvec[3] = trap;
-	_ramvec[4] = trap;
-	_ramvec[5] = trap;
-	_ramvec[6] = trap;
-	_ramvec[7] = trap;
-	_ramvec[8] = trap;
-	_ramvec[9] = trap;
-	_ramvec[10] = trap;
-	_ramvec[11] = trap;
-	_ramvec[12] = trap;
-	_ramvec[13] = trap;
-	_ramvec[14] = trap;
-	_ramvec[15] = trap;
-
-	_ramvec[32] = system_call;
-	_ramvec[33] = trap;
-
-	cpm_interrupt_init();
-
-	/* set up CICR for vector base address and irq level */
-	/* irl = 4, hp = 1f - see MC68360UM p 7-377 */
-	pquicc->intr_cicr = 0x00e49f00 | vba;
-
-	/* CPM interrupt vectors: (p 7-376) */
-	_ramvec[vba+CPMVEC_ERROR]       = bad_interrupt; /* Error */
-	_ramvec[vba+CPMVEC_PIO_PC11]    = inthandler;   /* pio - pc11 */
-	_ramvec[vba+CPMVEC_PIO_PC10]    = inthandler;   /* pio - pc10 */
-	_ramvec[vba+CPMVEC_SMC2]        = inthandler;   /* smc2/pip */
-	_ramvec[vba+CPMVEC_SMC1]        = inthandler;   /* smc1 */
-	_ramvec[vba+CPMVEC_SPI]         = inthandler;   /* spi */
-	_ramvec[vba+CPMVEC_PIO_PC9]     = inthandler;   /* pio - pc9 */
-	_ramvec[vba+CPMVEC_TIMER4]      = inthandler;   /* timer 4 */
-	_ramvec[vba+CPMVEC_RESERVED1]   = inthandler;   /* reserved */
-	_ramvec[vba+CPMVEC_PIO_PC8]     = inthandler;   /* pio - pc8 */
-	_ramvec[vba+CPMVEC_PIO_PC7]     = inthandler;  /* pio - pc7 */
-	_ramvec[vba+CPMVEC_PIO_PC6]     = inthandler;  /* pio - pc6 */
-	_ramvec[vba+CPMVEC_TIMER3]      = inthandler;  /* timer 3 */
-	_ramvec[vba+CPMVEC_PIO_PC5]     = inthandler;  /* pio - pc5 */
-	_ramvec[vba+CPMVEC_PIO_PC4]     = inthandler;  /* pio - pc4 */
-	_ramvec[vba+CPMVEC_RESERVED2]   = inthandler;  /* reserved */
-	_ramvec[vba+CPMVEC_RISCTIMER]   = inthandler;  /* timer table */
-	_ramvec[vba+CPMVEC_TIMER2]      = inthandler;  /* timer 2 */
-	_ramvec[vba+CPMVEC_RESERVED3]   = inthandler;  /* reserved */
-	_ramvec[vba+CPMVEC_IDMA2]       = inthandler;  /* idma 2 */
-	_ramvec[vba+CPMVEC_IDMA1]       = inthandler;  /* idma 1 */
-	_ramvec[vba+CPMVEC_SDMA_CB_ERR] = inthandler;  /* sdma channel bus error */
-	_ramvec[vba+CPMVEC_PIO_PC3]     = inthandler;  /* pio - pc3 */
-	_ramvec[vba+CPMVEC_PIO_PC2]     = inthandler;  /* pio - pc2 */
-	/* _ramvec[vba+CPMVEC_TIMER1]      = cpm_isr_timer1; */  /* timer 1 */
-	_ramvec[vba+CPMVEC_TIMER1]      = inthandler;  /* timer 1 */
-	_ramvec[vba+CPMVEC_PIO_PC1]     = inthandler;  /* pio - pc1 */
-	_ramvec[vba+CPMVEC_SCC4]        = inthandler;  /* scc 4 */
-	_ramvec[vba+CPMVEC_SCC3]        = inthandler;  /* scc 3 */
-	_ramvec[vba+CPMVEC_SCC2]        = inthandler;  /* scc 2 */
-	_ramvec[vba+CPMVEC_SCC1]        = inthandler;  /* scc 1 */
-	_ramvec[vba+CPMVEC_PIO_PC0]     = inthandler;  /* pio - pc0 */
-
-
-	/* turn off all CPM interrupts */
-	pquicc->intr_cimr = 0x00000000;
-}
-
-void init_IRQ(void)
-{
-	int i;
-
-	for (i = 0; (i < NR_IRQS); i++) {
-		irq_set_chip(i, &intc_irq_chip);
-		irq_set_handler(i, handle_level_irq);
-	}
-}
-
diff --git a/ANDROID_3.4.5/arch/m68k/platform/68EZ328/Makefile b/ANDROID_3.4.5/arch/m68k/platform/68EZ328/Makefile
deleted file mode 100644
index b44d799b..00000000
--- a/ANDROID_3.4.5/arch/m68k/platform/68EZ328/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-#
-# Makefile for arch/m68knommu/platform/68EZ328.
-#
-
-obj-y := config.o
diff --git a/ANDROID_3.4.5/arch/m68k/platform/68EZ328/config.c b/ANDROID_3.4.5/arch/m68k/platform/68EZ328/config.c
deleted file mode 100644
index 4f158d55..00000000
--- a/ANDROID_3.4.5/arch/m68k/platform/68EZ328/config.c
+++ /dev/null
@@ -1,76 +0,0 @@
-/***************************************************************************/
-
-/*
- *  linux/arch/m68knommu/platform/68EZ328/config.c
- *
- *  Copyright (C) 1993 Hamish Macdonald
- *  Copyright (C) 1999 D. Jeff Dionne
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file COPYING in the main directory of this archive
- * for more details.
- */
-
-/***************************************************************************/
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/rtc.h>
-#include <asm/pgtable.h>
-#include <asm/machdep.h>
-#include <asm/MC68EZ328.h>
-#ifdef CONFIG_UCSIMM
-#include <asm/bootstd.h>
-#endif
-
-/***************************************************************************/
-
-int m68328_hwclk(int set, struct rtc_time *t);
-
-/***************************************************************************/
-
-void m68ez328_reset(void)
-{
-  local_irq_disable();
-  asm volatile (
-    "moveal #0x10c00000, %a0;\n"
-    "moveb #0, 0xFFFFF300;\n"
-    "moveal 0(%a0), %sp;\n"
-    "moveal 4(%a0), %a0;\n"
-    "jmp (%a0);\n"
-    );
-}
-
-/***************************************************************************/
-
-unsigned char *cs8900a_hwaddr;
-static int errno;
-
-#ifdef CONFIG_UCSIMM
-_bsc0(char *, getserialnum)
-_bsc1(unsigned char *, gethwaddr, int, a)
-_bsc1(char *, getbenv, char *, a)
-#endif
-
-void config_BSP(char *command, int len)
-{
-  unsigned char *p;
-
-  printk(KERN_INFO "\n68EZ328 DragonBallEZ support (C) 1999 Rt-Control, Inc\n");
-
-#ifdef CONFIG_UCSIMM
-  printk(KERN_INFO "uCsimm serial string [%s]\n",getserialnum());
-  p = cs8900a_hwaddr = gethwaddr(0);
-  printk(KERN_INFO "uCsimm hwaddr %.2x:%.2x:%.2x:%.2x:%.2x:%.2x\n",
-         p[0], p[1], p[2], p[3], p[4], p[5]);
-
-  p = getbenv("APPEND");
-  if (p) strcpy(p,command);
-  else command[0] = 0;
-#endif
- 
-  mach_hwclk = m68328_hwclk;
-  mach_reset = m68ez328_reset;
-}
-
-/***************************************************************************/
diff --git a/ANDROID_3.4.5/arch/m68k/platform/68VZ328/Makefile b/ANDROID_3.4.5/arch/m68k/platform/68VZ328/Makefile
deleted file mode 100644
index a49d75e6..00000000
--- a/ANDROID_3.4.5/arch/m68k/platform/68VZ328/Makefile
+++ /dev/null
@@ -1,11 +0,0 @@
-#
-# Makefile for arch/m68knommu/platform/68VZ328.
-#
-
-obj-y		:= config.o
-extra-$(DRAGEN2):= screen.h
-
-$(obj)/screen.h: $(src)/screen.xbm $(src)/xbm2lcd.pl
-	perl $(src)/xbm2lcd.pl < $(src)/screen.xbm > $(obj)/screen.h
-
-clean-files := $(obj)/screen.h
diff --git a/ANDROID_3.4.5/arch/m68k/platform/68VZ328/bootlogo.h b/ANDROID_3.4.5/arch/m68k/platform/68VZ328/bootlogo.h
deleted file mode 100644
index b38e2b25..00000000
--- a/ANDROID_3.4.5/arch/m68k/platform/68VZ328/bootlogo.h
+++ /dev/null
@@ -1,3204 +0,0 @@
-#define splash_width 640
-#define splash_height 480
-unsigned char __attribute__ ((aligned(16))) bootlogo_bits[] = {
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x80, 0xff, 0x7f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc, 0xff,
-  0xff, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0xc0, 0xff, 0xff, 0xff, 0xff, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0xf8, 0xff, 0xff, 0xff, 0xff, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff,
-  0xff, 0xff, 0x3f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x38, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0xc0, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0x03, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0xf0, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x03, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0xfc, 0x7f, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc, 0xff, 0xff, 0xff,
-  0xff, 0xff, 0xff, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0xf8, 0xff, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0xfe, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x1f,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0, 0xff, 0xff,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80,
-  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x7f, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0x0f, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc0, 0xff, 0xff, 0xff, 0xff,
-  0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0xe0, 0xff, 0xff, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0xf0, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-  0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8,
-  0xff, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8,
-  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x07, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc0, 0xff, 0x7f, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc, 0xff, 0xff, 0xff, 0xff,
-  0xff, 0xff, 0xff, 0xff, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0xe0, 0xff, 0xff, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-  0x3f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0,
-  0x03, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xff,
-  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x7f, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0x00, 0xfe, 0xff, 0x1f,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc0, 0xff, 0xff, 0xff, 0xff, 0xff,
-  0xff, 0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x7c, 0x00, 0xe0, 0xff, 0x7f, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0xe0, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-  0xff, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3c,
-  0x00, 0x00, 0xf8, 0x7f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0, 0xff,
-  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x03, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3e, 0x00, 0x00, 0xe0, 0x7f,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0xff, 0xff, 0xff, 0xff, 0xff,
-  0xff, 0xff, 0xff, 0xff, 0xff, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x1e, 0x00, 0x00, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0xfc, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-  0xff, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1e,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0xff,
-  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x1f, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1e, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0xff, 0xff, 0xff, 0xff, 0xff,
-  0xff, 0xff, 0xff, 0xff, 0xff, 0x1f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x1e, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-  0xff, 0x3f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1e,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xff, 0xff,
-  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x7f, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1e, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0xc0, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x1c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0xc0, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-  0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3c,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe0, 0xff, 0xff,
-  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x01, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3c, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0xf0, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0xf0, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-  0xff, 0xff, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0xff, 0xff,
-  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x07, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0, 0x01, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0xe0, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0xfc, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-  0xff, 0xff, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe0,
-  0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc, 0xff, 0xff,
-  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x0f, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc, 0x7f, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x1f, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0xfc, 0xff, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0xfe, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-  0xff, 0xff, 0x1f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe,
-  0xff, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff,
-  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x3f, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0xff, 0x3f, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x3f, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x3e, 0xf8, 0xff, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x80, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-  0xff, 0xff, 0x7f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1e,
-  0x00, 0xfe, 0x7f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xff, 0xff, 0xff,
-  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x7f, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1c, 0x00, 0xfe, 0xff, 0x1f,
-  0x00, 0x00, 0x00, 0x00, 0x80, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x7f, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0xf0, 0xff, 0x7f, 0x00, 0x00, 0x00, 0x00,
-  0xc0, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-  0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0xfc, 0x7f, 0x00, 0x00, 0x00, 0x00, 0xc0, 0xff, 0xff, 0xff,
-  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc0, 0x7f,
-  0x00, 0x00, 0x00, 0x00, 0xc0, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00,
-  0xe0, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-  0xff, 0xff, 0xff, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe0, 0xff, 0x7f, 0xe0,
-  0xff, 0xff, 0xff, 0xff, 0xff, 0x7f, 0xe0, 0xff, 0xff, 0xff, 0xff, 0x01,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0xe0, 0xff, 0x7f, 0xe0, 0xff, 0xff, 0xff, 0xff,
-  0xff, 0x7f, 0xe0, 0xff, 0xff, 0xff, 0xff, 0x01, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7f, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0xe0, 0xff, 0x7f, 0xe0, 0xff, 0xff, 0xff, 0xff, 0xff, 0x7f, 0xe0, 0xff,
-  0xff, 0xff, 0xff, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0xe0, 0xff, 0x03, 0x00, 0x00, 0x00, 0x00, 0xf0, 0xff, 0x7f, 0xe0,
-  0xff, 0xff, 0xff, 0xff, 0xff, 0x7f, 0xe0, 0xff, 0xff, 0xff, 0xff, 0x03,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0xff, 0x1f,
-  0x00, 0x00, 0x00, 0x00, 0xf0, 0xff, 0x7f, 0xe0, 0xff, 0xff, 0xff, 0xff,
-  0xff, 0x7f, 0xe0, 0xff, 0xff, 0xff, 0xff, 0x03, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0xff, 0x7f, 0x00, 0x00, 0x00, 0x00,
-  0xf0, 0xff, 0x7f, 0xe0, 0xff, 0xff, 0xff, 0xff, 0xff, 0x7f, 0xe0, 0xff,
-  0xff, 0xff, 0xff, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0xf0, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0xf0, 0xff, 0x7f, 0xe0,
-  0xff, 0xff, 0xff, 0xff, 0xff, 0x7f, 0xe0, 0xff, 0x07, 0xfe, 0xff, 0x03,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0xff, 0xff, 0xff,
-  0x03, 0x00, 0x00, 0x00, 0xf0, 0xff, 0x7f, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0xe0, 0xff, 0x01, 0xf8, 0xff, 0x03, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x80, 0xff, 0xff, 0xff, 0xff, 0x0f, 0x00, 0x00, 0x00,
-  0xf8, 0xff, 0x7f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe0, 0xff,
-  0x00, 0xf0, 0xff, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc0,
-  0xff, 0xff, 0xff, 0xff, 0x1f, 0x00, 0x00, 0x00, 0xf8, 0xff, 0x7f, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe0, 0x7f, 0x00, 0xe0, 0xff, 0x07,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe0, 0xff, 0xff, 0xff, 0x03,
-  0x3f, 0x00, 0x00, 0x00, 0xf8, 0xff, 0x7f, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0xe0, 0x3f, 0x00, 0xc0, 0xff, 0x07, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0xf8, 0xff, 0xff, 0xff, 0x0f, 0xfc, 0x00, 0x00, 0x00,
-  0xf8, 0xff, 0x7f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe0, 0x1f,
-  0x00, 0x80, 0xff, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8,
-  0xff, 0xff, 0xff, 0x3f, 0xf0, 0x01, 0x00, 0x00, 0xf8, 0xff, 0x7f, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe0, 0x1f, 0x00, 0x80, 0xff, 0x07,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc, 0x3f, 0x00, 0xc0, 0xff,
-  0xc1, 0x03, 0x00, 0x00, 0xf8, 0xff, 0x7f, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0xe0, 0x0f, 0x00, 0x00, 0xff, 0x07, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0xfe, 0x0f, 0x00, 0x00, 0xfc, 0x07, 0x07, 0x00, 0x00,
-  0xf8, 0xff, 0x7f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe0, 0x0f,
-  0x00, 0x00, 0xff, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe,
-  0x07, 0x00, 0x00, 0xe0, 0x07, 0x0e, 0x00, 0x00, 0xf8, 0xff, 0x7f, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe0, 0x0f, 0x00, 0x00, 0xff, 0x07,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0x01, 0x00, 0x00, 0x00,
-  0x3f, 0x1c, 0x00, 0x00, 0xf8, 0xff, 0x7f, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0xe0, 0x0f, 0x00, 0x00, 0xff, 0x07, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0xfe, 0x00, 0x00, 0x00, 0x00, 0x3c, 0x38, 0x00, 0x00,
-  0xf8, 0xff, 0x7f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe0, 0x0f,
-  0x00, 0x00, 0xff, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7e,
-  0x00, 0x00, 0x00, 0x00, 0x78, 0x70, 0x00, 0x00, 0xf8, 0xff, 0x7f, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe0, 0x0f, 0x00, 0x00, 0xff, 0x07,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7e, 0x00, 0x00, 0x00, 0x00,
-  0xf0, 0xe0, 0x00, 0x00, 0xf8, 0xff, 0x7f, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0xe0, 0x0f, 0x00, 0x00, 0xff, 0x07, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x3f, 0x00, 0x00, 0x00, 0x00, 0xc0, 0xc3, 0x01, 0x00,
-  0xf8, 0xff, 0x7f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe0, 0x1f,
-  0x00, 0x80, 0xff, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3f,
-  0x00, 0x00, 0x00, 0x00, 0x80, 0xc7, 0x03, 0x00, 0xf8, 0xff, 0x7f, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe0, 0x1f, 0x00, 0x80, 0xff, 0x07,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1f, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x87, 0x03, 0x00, 0xf8, 0xff, 0x7f, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0xe0, 0x3f, 0x00, 0xc0, 0xff, 0x07, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x1f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0c, 0x07, 0x00,
-  0xf8, 0xff, 0x7f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe0, 0x7f,
-  0x00, 0xe0, 0xff, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x1f,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x0e, 0x00, 0xf0, 0xff, 0x7f, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe0, 0xff, 0x00, 0xf0, 0xff, 0x03,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x1f, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x30, 0x0c, 0x00, 0xf0, 0xff, 0x7f, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0xe0, 0xff, 0x01, 0xf8, 0xff, 0x03, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x1f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x60, 0x1c, 0x00,
-  0xf0, 0xff, 0x7f, 0xe0, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-  0x07, 0xfe, 0xff, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1f,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0xc0, 0x38, 0x00, 0xf0, 0xff, 0x7f, 0xe0,
-  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x03,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1f, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x80, 0x38, 0x00, 0xf0, 0xff, 0x7f, 0xe0, 0xff, 0xff, 0xff, 0xff,
-  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x03, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x1f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x71, 0x00,
-  0xe0, 0xff, 0x7f, 0xe0, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-  0xff, 0xff, 0xff, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1f,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x72, 0x00, 0xe0, 0xff, 0x7f, 0xe0,
-  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x01,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1e, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0xe2, 0x00, 0xe0, 0xff, 0x7f, 0xe0, 0xff, 0xff, 0xff, 0xff,
-  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x01, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x1e, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe0, 0x00,
-  0xe0, 0xff, 0x7f, 0xe0, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-  0xff, 0xff, 0xff, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3e,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe0, 0x01, 0xc0, 0xff, 0xff, 0xff,
-  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3c, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0xe0, 0x01, 0xc0, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x3c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc0, 0x01,
-  0xc0, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-  0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc0, 0x03, 0x80, 0xff, 0xff, 0xff,
-  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x7f, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0xc0, 0x03, 0x80, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x7f, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0xf8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc0, 0x03,
-  0x80, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-  0xff, 0xff, 0x7f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc0, 0x07, 0x00, 0xff, 0xff, 0xff,
-  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x3f, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe0, 0x01, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0xc0, 0x07, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x3f, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0xe0, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x07,
-  0x00, 0xfe, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-  0xff, 0xff, 0x1f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc0,
-  0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc0, 0x07, 0x00, 0xfe, 0xff, 0xff,
-  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x1f, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x03, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0xc0, 0x07, 0x00, 0xfc, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc0, 0x07,
-  0x00, 0xfc, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-  0xff, 0xff, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc0, 0x07, 0x00, 0xf8, 0xff, 0xff,
-  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x07, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0e, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0xc0, 0x07, 0x00, 0xf8, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x1c, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc0, 0x07,
-  0x00, 0xf0, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-  0xff, 0xff, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x07, 0x00, 0xf0, 0xff, 0xff,
-  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x03, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x60, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x07, 0x00, 0xe0, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0xc0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x07,
-  0x00, 0xc0, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-  0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x80, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc0, 0xff, 0xff,
-  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-  0xff, 0xff, 0xff, 0xff, 0xff, 0x7f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x10, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-  0xff, 0x1f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc,
-  0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0xff,
-  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x0f, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0x9f, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0xff, 0xff, 0xff, 0xff, 0xff,
-  0xff, 0xff, 0xff, 0xff, 0xff, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0xfe, 0xff, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0xfc, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-  0xff, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe,
-  0xff, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0xff,
-  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x03, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0xff, 0x0f, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0, 0xff, 0xff, 0xff, 0xff, 0xff,
-  0xff, 0xff, 0xff, 0xff, 0xff, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x1c, 0xff, 0xff, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0xe0, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-  0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1c,
-  0xf8, 0xff, 0x1f, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc0, 0xff,
-  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x7f, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x80, 0xff, 0xff, 0x00,
-  0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xff, 0xff, 0xff, 0xff, 0xff,
-  0xff, 0xff, 0xff, 0xff, 0x7f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x38, 0x00, 0xfe, 0xff, 0x0f, 0x20, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-  0x3f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70,
-  0x00, 0xf8, 0xff, 0xff, 0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc,
-  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x0f, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe0, 0x00, 0xc0, 0xff, 0xff,
-  0x7f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0xff, 0xff, 0xff, 0xff,
-  0xff, 0xff, 0xff, 0xff, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x80, 0x03, 0x00, 0xfc, 0xff, 0x7f, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0xf0, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-  0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x03, 0x00, 0xe0, 0xff, 0x7f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc0,
-  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe,
-  0x7f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xff, 0xff, 0xff, 0xff,
-  0xff, 0xff, 0xff, 0x7f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe0, 0x7f, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0xfe, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x1f,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0xfe, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0xfc, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x0f, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0xe0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0, 0xff, 0xff, 0xff,
-  0xff, 0xff, 0xff, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0xc0, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0x3f, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc, 0x07, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0xff, 0xff,
-  0xff, 0xff, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0xfe, 0x3f, 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0xc0, 0xff, 0xff, 0xff, 0xff, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe,
-  0xff, 0x03, 0xc0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0xfc, 0xff, 0xff, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0xff, 0x1f, 0xc0, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xff,
-  0x7f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0xfe, 0xff, 0xff, 0xc1, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1c,
-  0xfe, 0xff, 0xff, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1c, 0xf0, 0xff, 0xff, 0x01,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x38, 0x00, 0xff, 0xff, 0x01, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70,
-  0x00, 0xf8, 0xff, 0x01, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x0c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe0, 0x00, 0xc0, 0xff, 0x01,
-  0xfe, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0c, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0xc0, 0x01, 0x00, 0xfc, 0x01, 0xff, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x80, 0x41, 0x08, 0x04, 0xb3, 0x07, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x01, 0x00, 0xe0, 0x03, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80,
-  0x41, 0x08, 0x04, 0xb3, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02,
-  0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x00, 0x18, 0x8e, 0x31, 0x7b, 0x30,
-  0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x08, 0x00, 0x00, 0x18, 0x8e, 0x31, 0x7b, 0x30, 0x30, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x38, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0e, 0x00, 0x00, 0xf8,
-  0x41, 0xc6, 0x84, 0x0c, 0x36, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x80, 0x0f, 0x00, 0x00, 0xf8, 0x41, 0xc6, 0x84, 0x0c,
-  0x36, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe0,
-  0x0f, 0x00, 0x00, 0x18, 0x0c, 0x08, 0x00, 0x40, 0xc0, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7c,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc, 0x0f, 0x00, 0x00, 0xe4,
-  0xb1, 0xc1, 0x98, 0x00, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc, 0x03, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0xff, 0x09, 0x00, 0x00, 0xe4, 0xb1, 0xc1, 0x98, 0x00,
-  0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0xfc, 0x3f, 0x00, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3f,
-  0x08, 0x00, 0x00, 0x1c, 0x02, 0x08, 0x04, 0x4c, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc,
-  0xff, 0x01, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x10, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0c, 0x00, 0x00, 0x00, 0x1c,
-  0x02, 0x08, 0x04, 0x4c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc, 0xff, 0x1f, 0xc0, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x02, 0x10, 0x80,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x70, 0x00, 0x00, 0x00, 0x64, 0x4c, 0x00, 0x00, 0x00,
-  0x36, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0xf0, 0xff, 0xff, 0xc1, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x01, 0x00, 0x02, 0xf0, 0xff, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc0,
-  0x09, 0x00, 0x00, 0x64, 0x4c, 0x00, 0x00, 0x00, 0x36, 0x01, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0xff, 0xff, 0xff, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff,
-  0xff, 0x03, 0xf0, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x9c,
-  0x01, 0x08, 0x83, 0x0c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0xff, 0xff, 0x01,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0x03, 0xf0, 0xff,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x80, 0x0f, 0x00, 0x00, 0x64, 0x8c, 0x01, 0x18, 0x40,
-  0x30, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0xe0, 0xff, 0xff, 0x01, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0xff, 0xff, 0x03, 0xf0, 0xff, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0,
-  0x0f, 0x00, 0x00, 0x64, 0x8c, 0x01, 0x18, 0x40, 0x30, 0x01, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0xff, 0xff, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff,
-  0xff, 0x03, 0x10, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc, 0x0f, 0x00, 0x00, 0x9b,
-  0x01, 0xc0, 0x00, 0x00, 0xc6, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xbc, 0xff, 0x01,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x02, 0x02, 0x00, 0x40,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0xff, 0x09, 0x00, 0x00, 0x9b, 0x01, 0xc0, 0x00, 0x00,
-  0xc6, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0xc0, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0xf8, 0x01, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x01, 0x02, 0x02, 0x00, 0xc0, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3f,
-  0x00, 0x00, 0x00, 0x07, 0x32, 0x06, 0x18, 0x43, 0x00, 0x06, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe0,
-  0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0xf0, 0xc1, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01,
-  0x02, 0x02, 0x00, 0xc0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0c, 0x00, 0x00, 0x00, 0x07,
-  0x32, 0x06, 0x18, 0x43, 0x00, 0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0, 0xff, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x03, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x02, 0x10, 0xe0,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x70, 0x08, 0x00, 0x00, 0x7b, 0x00, 0x30, 0x03, 0x0c,
-  0x08, 0x19, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0xf0, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0xe0, 0x07, 0x03, 0xf0, 0xff, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc0,
-  0x09, 0x00, 0xc0, 0x84, 0x8d, 0x01, 0x80, 0x00, 0xc0, 0x06, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x1c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8,
-  0xfd, 0x03, 0xf0, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0f, 0x00, 0xc0, 0x84,
-  0x8d, 0x01, 0x80, 0x00, 0xc0, 0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0xfd, 0x03, 0xf0, 0x7f,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0xc0, 0x1b, 0x00, 0x30, 0x00, 0x40,
-  0x08, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x78, 0x00, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0xff, 0xfc, 0x01, 0xf0, 0x3f, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x08, 0x00, 0xc0, 0x1b, 0x00, 0x30, 0x00, 0x40, 0x08, 0x18, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc,
-  0x07, 0x00, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3f,
-  0xf8, 0x01, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0xc0, 0x64,
-  0x42, 0x06, 0x1b, 0x03, 0x00, 0x61, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x80, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0x7f, 0x00, 0xc0, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0f, 0xf0, 0x00, 0x10, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x0e, 0x00, 0xc0, 0x64, 0x42, 0x06, 0x1b, 0x03,
-  0x00, 0x61, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0xf0, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0xfe, 0xff, 0x03, 0xe0, 0x01, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80,
-  0x0f, 0x00, 0x00, 0x1b, 0x00, 0x00, 0x80, 0x30, 0x08, 0x86, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0,
-  0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe,
-  0xff, 0x3f, 0xc0, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe0, 0x0f, 0x00, 0x00, 0x1b,
-  0x00, 0x00, 0x80, 0x30, 0x08, 0x86, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0, 0xff, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc, 0xff, 0xff, 0xc3, 0x03,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0c, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0xfc, 0x0f, 0x00, 0xe0, 0x84, 0x31, 0x30, 0x04, 0x80,
-  0xc1, 0x18, 0x13, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0xf0, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x1c, 0xff, 0xff, 0xff, 0x03, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff,
-  0x09, 0x00, 0xc0, 0x63, 0x02, 0x06, 0x00, 0x00, 0x00, 0x60, 0x6c, 0xfc,
-  0xff, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18,
-  0xe0, 0xff, 0xff, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3f, 0x08, 0x00, 0xc0, 0x63,
-  0x02, 0x06, 0x00, 0x00, 0x00, 0x60, 0x6c, 0xfc, 0xff, 0x03, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x00, 0xff, 0xff, 0x03,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x0c, 0x00, 0x00, 0xe0, 0x1c, 0x40, 0x00, 0x1b, 0x4c,
-  0x06, 0x81, 0x80, 0xfd, 0xff, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x70, 0x00, 0xf0, 0xff, 0x01, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70,
-  0x00, 0x00, 0xe0, 0x1c, 0x40, 0x00, 0x1b, 0x4c, 0x06, 0x81, 0x80, 0xfd,
-  0xff, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe0,
-  0x00, 0x80, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc0, 0x09, 0x00, 0x20, 0x63,
-  0x0c, 0x08, 0x80, 0x00, 0x30, 0x06, 0x0c, 0xfc, 0xff, 0x7f, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x01, 0x00, 0x30, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0f,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x20, 0x63, 0x0c, 0x08, 0x80, 0x00,
-  0x30, 0x06, 0x0c, 0xfc, 0xff, 0x7f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0xff, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc0, 0x3f, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80,
-  0x0f, 0x00, 0xd8, 0x84, 0x01, 0xc0, 0x00, 0x00, 0x06, 0x00, 0x80, 0xf1,
-  0xff, 0xff, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc0,
-  0xff, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0xe0, 0x7f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0, 0x0f, 0x00, 0xf8, 0x1b,
-  0x40, 0x08, 0x84, 0x0c, 0xc0, 0x18, 0x13, 0xcc, 0xff, 0xff, 0x0f, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc0, 0xff, 0x0f, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0, 0x00, 0x00, 0xe0, 0x7f,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0xfc, 0x0f, 0x00, 0xf8, 0x1b, 0x40, 0x08, 0x84, 0x0c,
-  0xc0, 0x18, 0x13, 0xcc, 0xff, 0xff, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0xe0, 0xff, 0x1f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0xfc, 0x03, 0x00, 0xf0, 0xe4, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff,
-  0x09, 0x00, 0x38, 0x80, 0x01, 0x00, 0x18, 0x30, 0x06, 0x01, 0x00, 0xc0,
-  0xff, 0xff, 0xff, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30,
-  0x00, 0x1c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe,
-  0x07, 0x00, 0x30, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3f, 0x00, 0x00, 0x38, 0x80,
-  0x01, 0x00, 0x18, 0x30, 0x06, 0x01, 0x00, 0xc0, 0xff, 0xff, 0xff, 0x01,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x30, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc, 0x07, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0x07, 0x00, 0x10, 0x84,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x0c, 0x00, 0x00, 0xd8, 0x1f, 0x30, 0x36, 0x80, 0x00,
-  0x00, 0x00, 0x03, 0xf2, 0xff, 0xff, 0xff, 0x0f, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x10, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0xfc, 0x3f, 0x00, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x4f, 0x0e, 0x00, 0x10, 0x84, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70,
-  0x08, 0x00, 0xd8, 0x1f, 0x30, 0x36, 0x80, 0x00, 0x00, 0x00, 0x03, 0xf2,
-  0xff, 0xff, 0xff, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10,
-  0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe,
-  0xff, 0x03, 0xc0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x43,
-  0x08, 0x00, 0x10, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc0, 0x09, 0x00, 0x3e, 0x00,
-  0x82, 0x01, 0x03, 0x40, 0x30, 0x98, 0x10, 0xf0, 0xe7, 0xff, 0xff, 0xff,
-  0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x20, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0xff, 0x1f, 0xc0, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x41, 0x08, 0x00, 0x10, 0xe4,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x0f, 0x00, 0xe6, 0x1b, 0x00, 0x00, 0x18, 0x0c,
-  0x00, 0x00, 0x00, 0xfc, 0xff, 0xfb, 0xff, 0xff, 0x1f, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x10, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0xfe, 0xff, 0xff, 0xc1, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x41, 0x08, 0x00, 0x30, 0x7c, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x08, 0x00, 0xe6, 0x1b, 0x00, 0x00, 0x18, 0x0c, 0x00, 0x00, 0x00, 0xfc,
-  0xff, 0xfb, 0xff, 0xff, 0x1f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10,
-  0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x9e,
-  0xff, 0xff, 0xff, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x41,
-  0x08, 0x00, 0x20, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x1e, 0x64,
-  0x30, 0xc6, 0x80, 0x80, 0x09, 0x06, 0x63, 0xfe, 0xf9, 0xff, 0xff, 0xff,
-  0xff, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x30, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1c, 0xf8, 0xff, 0xff, 0x01,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x41, 0x0e, 0x00, 0xc0, 0x3c,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x1e, 0x64, 0x30, 0xc6, 0x80, 0x80,
-  0x09, 0x06, 0x63, 0xfe, 0xf9, 0xff, 0xff, 0xff, 0xff, 0x03, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x20, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x1c, 0x80, 0xff, 0xff, 0x01, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0xc3, 0x07, 0x00, 0x00, 0x0c, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x0e, 0x00, 0x39, 0x03, 0x00, 0x00, 0x04, 0x0c, 0xc0, 0x60, 0x80, 0x3f,
-  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc0,
-  0x00, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3c,
-  0x00, 0xfc, 0xff, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc2,
-  0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x0f, 0x00, 0x39, 0x03,
-  0x00, 0x00, 0x04, 0x0c, 0xc0, 0x60, 0x80, 0x3f, 0xff, 0xff, 0xff, 0xff,
-  0xff, 0xff, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x3e, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x80, 0xff, 0x01,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xcc, 0x03, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0xe0, 0x0f, 0x00, 0xe7, 0x04, 0x42, 0xc6, 0x00, 0x00,
-  0x00, 0x00, 0xec, 0xcf, 0xff, 0xff, 0xff, 0x3f, 0xff, 0xff, 0x0f, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x80, 0x3f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0xe0, 0x00, 0x00, 0xfc, 0x01, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0xc0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc,
-  0x0f, 0xc0, 0x1f, 0x80, 0x01, 0x00, 0x98, 0x4c, 0x06, 0x06, 0xf0, 0x01,
-  0x00, 0xe0, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe0,
-  0x01, 0x00, 0xc0, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0x09, 0xc0, 0x1f, 0x80,
-  0x01, 0x00, 0x98, 0x4c, 0x06, 0x06, 0xf0, 0x01, 0x00, 0xe0, 0xff, 0xff,
-  0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x20, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x07, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x3f, 0x08, 0xc0, 0xe6, 0x04, 0x0c, 0x08, 0x00, 0x00,
-  0xc0, 0x60, 0x7c, 0x00, 0x00, 0x00, 0xc0, 0xff, 0xff, 0xff, 0xff, 0x01,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0xf0, 0x1f, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0c,
-  0x00, 0xc0, 0xe6, 0x04, 0x0c, 0x08, 0x00, 0x00, 0xc0, 0x60, 0x7c, 0x00,
-  0x00, 0x00, 0xc0, 0xff, 0xff, 0xff, 0xff, 0x01, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0,
-  0xff, 0x3f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x1e, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0xc0, 0x19, 0x60,
-  0x40, 0x00, 0x63, 0x30, 0x08, 0x00, 0x7f, 0x00, 0x00, 0x00, 0x00, 0xf8,
-  0xff, 0xf3, 0xff, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0, 0xff, 0x3f, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0xc0, 0x09, 0xc0, 0x19, 0x60, 0x40, 0x00, 0x63, 0x30,
-  0x08, 0x00, 0x7f, 0x00, 0x00, 0x00, 0x00, 0xf8, 0xff, 0xf3, 0xff, 0x07,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0xf0, 0xff, 0x3f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x78, 0xf0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x0f, 0xc0, 0x27, 0x03, 0x00, 0x30, 0x00, 0x03, 0x00, 0xe6, 0x1f, 0x00,
-  0x00, 0x00, 0x00, 0xc0, 0xff, 0xff, 0xff, 0x1f, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10,
-  0xe0, 0x3f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc,
-  0xcf, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0xe0, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x0f, 0xc0, 0x27, 0x03,
-  0x00, 0x30, 0x00, 0x03, 0x00, 0xe6, 0x1f, 0x00, 0x00, 0x00, 0x00, 0xc0,
-  0xff, 0xff, 0xff, 0x1f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0xff, 0x0f, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0, 0xff,
-  0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0xf0, 0x0f, 0xc0, 0xde, 0x04, 0x0c, 0x06, 0x03, 0x80,
-  0xc1, 0xf8, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc, 0xff, 0xff, 0x7f,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0xfe, 0xff, 0x3f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x0f, 0x03, 0x00, 0xf8, 0xff, 0x07, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc,
-  0x0f, 0xc0, 0x19, 0x00, 0x32, 0x00, 0x60, 0x30, 0x08, 0xff, 0x03, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0xe0, 0xff, 0xff, 0xff, 0x03, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe,
-  0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x9f,
-  0x07, 0x00, 0xf8, 0xff, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0x09, 0xc0, 0x19, 0x00,
-  0x32, 0x00, 0x60, 0x30, 0x08, 0xff, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0xe0, 0xff, 0xff, 0xff, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x80, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0xff, 0xff, 0x07, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x9f, 0x07, 0x00, 0x18, 0x40,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x3f, 0x00, 0xc0, 0x27, 0x63, 0x80, 0x31, 0x04, 0x03,
-  0xf0, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff,
-  0x1f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0xf8, 0x5f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x1c, 0xfe, 0xff, 0x3f, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x80, 0x1f, 0x07, 0x00, 0x18, 0x40, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0c,
-  0x00, 0xc0, 0x27, 0x63, 0x80, 0x31, 0x04, 0x03, 0xf0, 0xff, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0x1f, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8,
-  0x7f, 0x0c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1c,
-  0xe0, 0xff, 0xff, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x31,
-  0x04, 0x00, 0x10, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x08, 0x00, 0xd9, 0x04,
-  0x00, 0x08, 0x00, 0x80, 0xf9, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0xf0, 0xff, 0xff, 0x7f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0x7f, 0x1e, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x00, 0xfe, 0xff, 0x01,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x20, 0x04, 0x00, 0x60, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0xc0, 0x09, 0x00, 0xd9, 0x04, 0x00, 0x08, 0x00, 0x80,
-  0xf9, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0, 0xff, 0xff,
-  0x7f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0xf8, 0x7f, 0x1e, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x78, 0x00, 0xf0, 0xff, 0x01, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x80, 0x20, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x0f, 0xc0, 0x27, 0x00, 0x30, 0xc0, 0x60, 0xb0, 0xff, 0x7f, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xff, 0xff, 0xff, 0x01, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08,
-  0x60, 0x0c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc0,
-  0x00, 0x00, 0xff, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x41,
-  0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0xc0, 0xde, 0x9b,
-  0x8d, 0x01, 0x04, 0xc3, 0xff, 0x1f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x80, 0xf1, 0xff, 0xff, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xbc, 0x03, 0x00, 0xf0, 0x01,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0x07, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x08, 0xc0, 0xde, 0x9b, 0x8d, 0x01, 0x04, 0xc3,
-  0xff, 0x1f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xf1, 0xff,
-  0xff, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x3e, 0x03, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0xff, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0xc0, 0x39, 0x04, 0x00, 0xc8, 0x00, 0xfc, 0xff, 0x07, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc6, 0xf8, 0xff, 0x3f, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3e,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xff,
-  0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0e, 0x00, 0xc0, 0x39, 0x04,
-  0x00, 0xc8, 0x00, 0xfc, 0xff, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0xc6, 0xf8, 0xff, 0x3f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x40, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3e, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xff, 0x01, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x1f, 0x00, 0xc0, 0xc7, 0x60, 0x42, 0x00, 0x60, 0xff,
-  0xff, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01,
-  0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0xf8, 0x5f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x3e, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x80, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1f,
-  0x00, 0xc0, 0xc7, 0x60, 0x42, 0x00, 0x60, 0xff, 0xff, 0x01, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0xff, 0xff, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8,
-  0x7f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3c,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1f, 0x00, 0xc0, 0xff, 0x07,
-  0xb0, 0x09, 0xe4, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x30, 0x00, 0xfc, 0xff, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0x7f, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1c, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x0e, 0x00, 0xc0, 0xde, 0x78, 0x02, 0x00, 0xfb, 0xff,
-  0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x80, 0xff, 0x1f, 0xf8, 0xff, 0xff, 0x1f, 0xf0, 0xff, 0xff, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0xf8, 0x7f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x38, 0x00, 0x00, 0xc0, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0xc0, 0xde, 0x78, 0x02, 0x00, 0xfb, 0xff, 0xff, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xff, 0x1f, 0xf8,
-  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x01, 0x00, 0x00, 0x00, 0x08,
-  0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70,
-  0x00, 0x00, 0xc0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0xc0, 0x3f, 0x07,
-  0xb0, 0xc9, 0xf8, 0xff, 0x3f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-  0xff, 0xff, 0xff, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0, 0x00, 0x00, 0xc0, 0x01,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x08, 0xc0, 0x3f, 0x07, 0xb0, 0xc9, 0xf8, 0xff,
-  0x3f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0xfe, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x0f,
-  0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x80, 0x03, 0x00, 0xc0, 0x01, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc,
-  0x0f, 0x00, 0xe7, 0xfb, 0x43, 0x30, 0xf8, 0xff, 0x0f, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc, 0xff, 0xff,
-  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x0f, 0x00, 0x00, 0x00, 0x00,
-  0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x07, 0x00, 0xc0, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0x0f, 0x00, 0xe7, 0xfb,
-  0x43, 0x30, 0xf8, 0xff, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0xfc, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-  0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x08, 0x70, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1e, 0x00, 0xe0, 0x01,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0xff, 0x0f, 0x00, 0xfe, 0x1c, 0xb2, 0x0f, 0xe0, 0xff,
-  0x07, 0x00, 0xe0, 0xff, 0xff, 0xff, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0xc0, 0xff, 0xff, 0xcf, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-  0x00, 0x00, 0x00, 0xf8, 0x7f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0xfc, 0x03, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff,
-  0x0f, 0x00, 0xf8, 0xe7, 0xfd, 0x01, 0xe0, 0xff, 0x07, 0x00, 0xe0, 0xff,
-  0xff, 0xff, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc1, 0xe0,
-  0xb1, 0x3f, 0x00, 0xe0, 0xff, 0xff, 0xff, 0xff, 0x01, 0x00, 0x00, 0xf8,
-  0x7f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0xf0, 0xc0, 0xff, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0xf8, 0xe7,
-  0xfd, 0x01, 0xe0, 0xff, 0x07, 0x00, 0xe0, 0xff, 0xff, 0xff, 0x0f, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc1, 0xe0, 0xb1, 0x3f, 0x00, 0x00,
-  0xf8, 0xff, 0xff, 0xff, 0x07, 0x00, 0x00, 0xf8, 0x7f, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe0, 0xff, 0xff, 0x03,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0x01, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x03, 0x00, 0x00, 0xf8, 0xff, 0x7f, 0x00, 0x80, 0xff,
-  0x01, 0x00, 0xe0, 0x03, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x98, 0x4f, 0x0e, 0x18, 0x00, 0xf8, 0xff, 0xff, 0xff,
-  0x07, 0x00, 0x00, 0xf8, 0x3f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0xf8, 0xff, 0xff, 0x01, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0xff, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03,
-  0x00, 0x00, 0xf8, 0xff, 0x7f, 0x00, 0x80, 0xff, 0x01, 0x00, 0xe0, 0x03,
-  0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x98,
-  0x4f, 0x0e, 0xf8, 0x1f, 0xf6, 0xff, 0xff, 0xff, 0x1f, 0x00, 0x00, 0x08,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80,
-  0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff,
-  0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0xf8, 0xff,
-  0x7f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc0, 0x01, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0xb1, 0x01, 0xff, 0x1f,
-  0xf6, 0xff, 0xff, 0xff, 0x1f, 0x00, 0x00, 0x08, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0xff, 0xff, 0x1f, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x03, 0x07, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x04, 0x08, 0x00, 0xf8, 0xff, 0x7f, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0xc0, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0xf8, 0xb1, 0x01, 0xff, 0x7f, 0xc0, 0xff, 0xff, 0xff,
-  0x3f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0xfc, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x80, 0x00, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff,
-  0x0f, 0x00, 0xe0, 0xff, 0x3f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc0,
-  0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7f,
-  0x00, 0xce, 0xff, 0x7f, 0xc0, 0xff, 0xff, 0xff, 0x3f, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe,
-  0xff, 0xe3, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00,
-  0x04, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0x0f, 0x00, 0xe0, 0xff,
-  0x3f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc0, 0x01, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7f, 0x00, 0xce, 0xff, 0x7f,
-  0x00, 0xff, 0xff, 0xff, 0x3f, 0x00, 0x00, 0x00, 0x40, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0x1f, 0x00, 0x07, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x04, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0xff, 0x0f, 0x00, 0xc0, 0xff, 0x3f, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0xc0, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x20, 0x1b, 0xb2, 0x31, 0xff, 0x7f, 0x00, 0xff, 0xff, 0xff,
-  0x3f, 0x00, 0x00, 0xe0, 0x5f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0xfe, 0x03, 0x00, 0x1e, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x80, 0x01, 0x06, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff,
-  0x0f, 0x00, 0xc0, 0xff, 0x3f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc0,
-  0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc0, 0xc0, 0x1c,
-  0x00, 0xc0, 0xff, 0x73, 0xc0, 0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0xf0,
-  0x7f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3e,
-  0x00, 0x00, 0x38, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03,
-  0x03, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0xc0, 0xff,
-  0x3f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc0, 0x07, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0xc0, 0xc0, 0x1c, 0x00, 0xc0, 0x7f, 0x1c,
-  0x30, 0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0xf8, 0x7f, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1c, 0x00, 0x00, 0x78, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xff, 0xff, 0x01, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0xc0, 0xff, 0x0f, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x38, 0x87, 0x31, 0x06, 0x7c, 0x1c, 0x30, 0xff, 0xff, 0xff,
-  0xff, 0x00, 0x00, 0xf8, 0x7f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x18, 0x00, 0x00, 0xe0, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x80, 0xff, 0xff, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0xc0, 0xff, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0xff, 0xff, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x87,
-  0x31, 0x06, 0xfc, 0x0f, 0xc8, 0xff, 0xff, 0xff, 0xff, 0x03, 0x00, 0x38,
-  0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30,
-  0x00, 0x00, 0xc0, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xff,
-  0xff, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0, 0x00, 0x00, 0xc0, 0xff,
-  0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0x0f, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0xe6, 0x04, 0x00, 0x30, 0xe3, 0x0f,
-  0xc8, 0xff, 0xff, 0xff, 0xff, 0x03, 0x00, 0x18, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x60, 0x00, 0x00, 0xe0, 0x01,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xff, 0xff, 0x01, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0xfc, 0x03, 0x00, 0xc0, 0xff, 0x0f, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x30, 0xe6, 0x04, 0x00, 0x30, 0x03, 0x00, 0xf0, 0xff, 0xff, 0xff,
-  0xff, 0x03, 0x00, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0xc0, 0x01, 0x00, 0xe0, 0x03, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe,
-  0x07, 0x00, 0xc0, 0xff, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc0,
-  0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x1b,
-  0x4c, 0x00, 0x04, 0x00, 0xf0, 0xff, 0xff, 0xff, 0xff, 0x03, 0x00, 0x10,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x01, 0x00, 0xf0, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0x07, 0x00, 0xc0, 0xff,
-  0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc0, 0x01, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x07, 0x04, 0x00, 0x06, 0x18, 0x80,
-  0xff, 0xff, 0xff, 0xff, 0xff, 0x03, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0, 0x03,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x0f, 0x0e, 0x00, 0xc0, 0xff, 0x0f, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0xc0, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x02, 0x07, 0x04, 0x00, 0x06, 0x78, 0xf3, 0xff, 0xff, 0xff, 0xff,
-  0xff, 0x07, 0x00, 0xf8, 0x5f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe0, 0x01, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03,
-  0x08, 0x00, 0xc0, 0xff, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x3e, 0x04,
-  0x02, 0x30, 0x60, 0xf3, 0xff, 0xff, 0xff, 0xff, 0xff, 0x07, 0x00, 0xf8,
-  0x7f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x08, 0x00, 0xc0, 0xff,
-  0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x3e, 0x04, 0x02, 0x30, 0xe0, 0xff,
-  0xff, 0xff, 0xff, 0xff, 0xff, 0x07, 0x00, 0xf8, 0x7f, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x01, 0x08, 0x00, 0x00, 0xff, 0x0f, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0xc6, 0x04, 0x40, 0x00, 0xfb, 0xff, 0xff, 0xff, 0xff, 0xff,
-  0xff, 0x07, 0x00, 0xf8, 0x7f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01,
-  0x08, 0x00, 0x00, 0xff, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc6, 0x04,
-  0x40, 0x00, 0xfb, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x07, 0x00, 0x08,
-  0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x0e, 0x00, 0x00, 0xff,
-  0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0xff, 0x03, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x39, 0x67, 0x00, 0x06, 0xe0, 0xff,
-  0xff, 0xff, 0xff, 0xff, 0xff, 0x07, 0x00, 0x08, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x03, 0x0f, 0x00, 0x00, 0xff, 0x0f, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0x3f, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x06, 0x04, 0x30, 0x00, 0xfb, 0xff, 0xff, 0xff, 0xff, 0xff,
-  0xff, 0x3f, 0x00, 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x18, 0x00, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02,
-  0x0f, 0x00, 0x00, 0xff, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0xff, 0xff, 0x3f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x06, 0x04,
-  0x30, 0x00, 0xfb, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x3f, 0x00, 0x08,
-  0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3c, 0x00,
-  0x04, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0c, 0x06, 0x00, 0x00, 0xff,
-  0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc0, 0x1f, 0x00, 0x7e, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x3e, 0x9b, 0x01, 0x30, 0xe0, 0xff,
-  0xff, 0xff, 0xff, 0xff, 0xff, 0x3f, 0x00, 0x08, 0x60, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3c, 0x00, 0x06, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0x0f, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0xc0, 0x1f, 0x00, 0x7e, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x30, 0x3e, 0x9b, 0x01, 0x30, 0xe0, 0xff, 0xff, 0xff, 0xff, 0xff,
-  0xff, 0x3f, 0x00, 0x18, 0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x1c, 0x80, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01,
-  0x00, 0x02, 0x00, 0xff, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0,
-  0x01, 0x00, 0xf0, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc6, 0x1c,
-  0x0c, 0x06, 0xfb, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x3f, 0x00, 0x38,
-  0x78, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0c, 0xe0,
-  0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x02, 0x00, 0xff,
-  0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0, 0x01, 0x00, 0xf0, 0x01,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc6, 0x1c, 0x0c, 0x06, 0xfb, 0xff,
-  0xff, 0xff, 0xff, 0xff, 0xff, 0x3f, 0x00, 0x68, 0x7c, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0xf8, 0x07, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0xff, 0xff, 0x03, 0x00, 0xff, 0x3f, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0xf0, 0x00, 0x00, 0xc0, 0x01, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x38, 0x18, 0x00, 0x00, 0xfb, 0xff, 0xff, 0xff, 0xff, 0xff,
-  0xff, 0x3f, 0x00, 0xc0, 0x7e, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x18, 0xfe, 0x05, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff,
-  0xff, 0x03, 0x00, 0xff, 0x3f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc,
-  0x00, 0x00, 0xc0, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc0, 0xc6, 0x9b,
-  0x81, 0x01, 0x60, 0x00, 0xfe, 0xff, 0xff, 0xff, 0xff, 0x3f, 0x00, 0x80,
-  0x5f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0, 0x7f,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0x03, 0x00, 0xff,
-  0x3f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc, 0x00, 0x00, 0xc0, 0x07,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0xc0, 0xc6, 0x9b, 0x81, 0x01, 0x00, 0x00,
-  0xf6, 0xff, 0xff, 0xff, 0xff, 0x3f, 0x00, 0xc0, 0x0f, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc0, 0x1f, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0xff, 0xff, 0x03, 0x00, 0xff, 0x3f, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x3c, 0x00, 0x00, 0x80, 0x07, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x38, 0x78, 0x0c, 0x30, 0x04, 0x00, 0xf6, 0xff, 0xff, 0xff,
-  0xff, 0x3f, 0x00, 0xe8, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01,
-  0x00, 0x00, 0x00, 0xff, 0x3f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3c,
-  0x00, 0x00, 0x80, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x78,
-  0x0c, 0x30, 0x04, 0x00, 0xc8, 0xff, 0xff, 0xff, 0xff, 0x3f, 0x00, 0xf8,
-  0x0d, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38,
-  0x04, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0xff,
-  0x3f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3c, 0x00, 0x00, 0x80, 0x07,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc0, 0x64, 0x40, 0x00, 0x1c, 0x00,
-  0xc8, 0xff, 0xff, 0xff, 0xff, 0x3f, 0x00, 0xf8, 0x58, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe0, 0x04, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0x3f, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x3c, 0x00, 0x00, 0x80, 0x07, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0xc0, 0x64, 0x40, 0x00, 0xfc, 0x03, 0xc0, 0xff, 0xff, 0xff,
-  0xff, 0x3f, 0x00, 0x78, 0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x80, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01,
-  0x08, 0x00, 0x00, 0xff, 0x3f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3c,
-  0x00, 0x00, 0x80, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0xe0,
-  0x01, 0x36, 0xfc, 0x03, 0xc0, 0xff, 0xff, 0xff, 0xff, 0x3f, 0x00, 0x38,
-  0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x08, 0x00, 0x00, 0xff,
-  0x3f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3c, 0x00, 0x00, 0x80, 0x07,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0xe0, 0x01, 0x36, 0xfc, 0x1f,
-  0x30, 0xff, 0xff, 0xff, 0xff, 0x07, 0x00, 0x18, 0x40, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x04, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0xff, 0x8f, 0x01, 0x00, 0xff, 0x3f, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x3c, 0x00, 0x00, 0x80, 0x07, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0xc6, 0x87, 0x0f, 0x00, 0xff, 0x1f, 0x30, 0xff, 0xff, 0xff,
-  0xff, 0x07, 0x00, 0x08, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0xfe, 0xff, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff,
-  0xcf, 0x03, 0x00, 0xff, 0x7f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc,
-  0x00, 0x00, 0xc0, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18,
-  0x40, 0xc0, 0xff, 0x7f, 0xc0, 0xfe, 0xff, 0xff, 0xff, 0x07, 0x00, 0x08,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc, 0xff, 0x0f, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0xcf, 0x03, 0x00, 0xff,
-  0x7f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc, 0x00, 0x00, 0xc0, 0x07,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x40, 0xc0, 0xff, 0x7f,
-  0x00, 0xff, 0xff, 0xff, 0xff, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0xfc, 0xff, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0xff, 0x8f, 0x01, 0x00, 0xff, 0x7f, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0xf0, 0x00, 0x00, 0xc0, 0x01, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x03, 0x0e, 0xc6, 0xff, 0x7f, 0x00, 0xff, 0xff, 0xff,
-  0xff, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0xfe, 0xff, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01,
-  0x00, 0x00, 0x00, 0xff, 0x7f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0,
-  0x00, 0x00, 0xc0, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03,
-  0x0e, 0xc6, 0xff, 0x7f, 0x00, 0xfe, 0xff, 0xff, 0xff, 0x07, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x06, 0x0c, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0xff,
-  0x7f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0, 0x01, 0x00, 0xf0, 0x01,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x9c, 0x01, 0x30, 0xff, 0x7f,
-  0x00, 0xfe, 0xff, 0xff, 0xff, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x02, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0x7f, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0xf0, 0x01, 0x00, 0xf0, 0x01, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x20, 0x9c, 0x01, 0x30, 0xff, 0x63, 0x30, 0xff, 0xff, 0xff,
-  0xff, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x02, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01,
-  0x08, 0x00, 0x00, 0xff, 0xff, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc0,
-  0x07, 0x00, 0x7e, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x60,
-  0x4c, 0x00, 0xff, 0x63, 0x30, 0xff, 0xff, 0xff, 0xff, 0x07, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x10, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x08, 0x00, 0x00, 0xff,
-  0xff, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3f, 0x00, 0x3e, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xb2, 0x31, 0xfc, 0x1f,
-  0x00, 0xff, 0xff, 0xfd, 0xff, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x02, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0xff, 0x0f, 0x00, 0x00, 0xff, 0xff, 0x01, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x3f, 0x00, 0x3e, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0xb2, 0x31, 0xfc, 0x0f, 0x00, 0xff, 0xff, 0x03,
-  0xff, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x0e, 0x1c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff,
-  0x0f, 0x00, 0x00, 0xff, 0xff, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x38, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x98,
-  0x41, 0x00, 0xe0, 0x0f, 0x00, 0xff, 0xff, 0x03, 0xff, 0x03, 0x00, 0x38,
-  0x80, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc, 0x0f, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0x0f, 0x00, 0x00, 0xff,
-  0xff, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x98, 0x41, 0x00, 0x00, 0x80,
-  0xc9, 0xf9, 0xff, 0x3d, 0xff, 0x03, 0x00, 0x78, 0xc0, 0x0f, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0xfc, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0xff, 0x0f, 0x00, 0x00, 0xff, 0xff, 0x07, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x60, 0x32, 0x08, 0x00, 0x80, 0xc9, 0xf9, 0xff, 0x3d,
-  0xff, 0x03, 0x00, 0xf8, 0xc0, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0xf8, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01,
-  0x02, 0x00, 0x00, 0xff, 0xff, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x60,
-  0x32, 0x08, 0x00, 0x00, 0xf0, 0xff, 0xff, 0xcf, 0xff, 0x00, 0x00, 0xf8,
-  0x81, 0x13, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe0, 0x01, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x04, 0x00, 0x00, 0xff,
-  0xff, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0xe0, 0x01, 0xf8, 0x00, 0x00,
-  0xf0, 0xff, 0xff, 0xcf, 0xff, 0x00, 0x00, 0x38, 0x03, 0x10, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x60, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x0c, 0x00, 0x00, 0xff, 0xff, 0x3f, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0xf8, 0xff, 0xff, 0x03, 0x80, 0xff, 0xff, 0xff, 0xff,
-  0x3f, 0x00, 0x00, 0x38, 0x06, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0,
-  0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x0c, 0x00, 0x00, 0xff, 0xff, 0x3f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8,
-  0xff, 0xff, 0x03, 0xfc, 0xff, 0xff, 0xff, 0xff, 0x3f, 0x00, 0x00, 0x38,
-  0x1e, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0, 0x00, 0x18, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x0e, 0x00, 0x00, 0xff,
-  0xff, 0x3f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0xff, 0xff, 0x03, 0xfc,
-  0xff, 0xff, 0xff, 0xff, 0x3f, 0x00, 0x00, 0x38, 0xfc, 0x1f, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x70, 0x00, 0x1e, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0xff, 0x0f, 0x00, 0x00, 0xff, 0xff, 0x3f, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-  0x1f, 0x00, 0x00, 0x38, 0xf8, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30,
-  0x80, 0x1f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff,
-  0x0f, 0x00, 0x00, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff,
-  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x1f, 0x00, 0x00, 0x78,
-  0xf0, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0xe0, 0x1f, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0x07, 0x00, 0x00, 0xff,
-  0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0xff, 0xff, 0xff, 0xff, 0xff,
-  0xff, 0xff, 0xff, 0xff, 0x07, 0x00, 0x00, 0xf8, 0xc1, 0x07, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x60, 0xf8, 0x17, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0xff, 0x03, 0x00, 0xc0, 0xff, 0xff, 0xff, 0x03, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x06, 0x00,
-  0x00, 0x00, 0xf8, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-  0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc0,
-  0xff, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01,
-  0x00, 0x00, 0xc0, 0xff, 0xff, 0xff, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x06, 0x00, 0x00, 0x00, 0xff, 0xff,
-  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x07, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7f, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0xc0, 0xff,
-  0xff, 0xff, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-  0xff, 0xff, 0xff, 0xff, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x3c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc0, 0xff, 0xff, 0xff, 0x1f, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0xf0, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-  0x01, 0x00, 0x00, 0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0xe0, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x08, 0x00, 0xc0, 0xff, 0xff, 0xff, 0x1f, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0xff, 0x67,
-  0xfe, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0xf8,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x13, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0xc0, 0xff,
-  0xff, 0xff, 0x1f, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0xf0, 0xff, 0xff, 0x67, 0xfe, 0xff, 0xff, 0xff,
-  0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0xf8, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x1e, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0xfc, 0x0f, 0x00, 0xc0, 0xff, 0xff, 0xff, 0x1f, 0x03,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0xf0, 0xff, 0xff, 0x98, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x0f,
-  0x00, 0x00, 0x00, 0xf8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe,
-  0x0f, 0x00, 0xf8, 0xff, 0xff, 0xff, 0x7f, 0x00, 0x08, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xff, 0xff, 0xff, 0x98,
-  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x0f, 0x00, 0x00, 0x00, 0x70,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0x0f, 0x00, 0xf8, 0xff,
-  0xff, 0xff, 0x7f, 0x00, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x80, 0xff, 0xff, 0x3f, 0xe7, 0xff, 0xff, 0xff, 0xff,
-  0xff, 0xff, 0xff, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0xff, 0x0f, 0x00, 0xff, 0xfc, 0xff, 0xff, 0xff, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe,
-  0xff, 0xff, 0x3f, 0xe7, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x01,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x07,
-  0x00, 0xc0, 0xff, 0x67, 0x8c, 0xf9, 0xfb, 0x73, 0x00, 0x67, 0x10, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc0, 0xff, 0xff, 0xff, 0xff, 0xf8,
-  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x1f, 0x00, 0x00, 0x00, 0x00, 0x80,
-  0xff, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x00, 0xc0, 0xff, 0x67,
-  0x8c, 0xf9, 0xfb, 0x73, 0x00, 0x67, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0xc0, 0xff, 0xff, 0xff, 0x1f, 0xe7, 0xff, 0xff, 0xff, 0xff,
-  0xff, 0xff, 0x0f, 0x00, 0x00, 0x00, 0x00, 0xe0, 0xff, 0x07, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x03, 0x00, 0xc0, 0x27, 0xfc, 0x73, 0xc6, 0x1c, 0x8c,
-  0x37, 0x80, 0x0c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0xff,
-  0xff, 0xff, 0x1f, 0xe7, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x0f, 0x00,
-  0x00, 0x00, 0x00, 0xf0, 0xff, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02,
-  0x00, 0xc0, 0x27, 0xfc, 0x73, 0xc6, 0x1c, 0x8c, 0x37, 0x80, 0x0c, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0xff, 0xff, 0xff, 0xff, 0xfc,
-  0xff, 0xff, 0xff, 0xff, 0xff, 0x7f, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0,
-  0xff, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x04, 0x08, 0xc0, 0xfe, 0x03,
-  0x8c, 0x09, 0xe3, 0x73, 0xc8, 0x06, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x80, 0xff, 0xff, 0xff, 0xff, 0xff, 0xfc, 0xff, 0xff, 0xff, 0xff,
-  0xff, 0x7f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0x18, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0xff, 0x0f, 0xc0, 0xfe, 0x03, 0x8c, 0x09, 0xe3, 0x73,
-  0xc8, 0x06, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xff, 0xff,
-  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x07, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x08, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff,
-  0x0f, 0xc0, 0x27, 0xe7, 0x31, 0x36, 0x04, 0x8c, 0x01, 0x60, 0x03, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0xf0, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-  0xff, 0xff, 0xff, 0xff, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08,
-  0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0x0f, 0xc0, 0xde, 0x18,
-  0x42, 0xc0, 0x98, 0x30, 0x08, 0x01, 0x80, 0x01, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x07, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0x18, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0xff, 0x0f, 0xc0, 0xde, 0x18, 0x42, 0xc0, 0x98, 0x30,
-  0x08, 0x01, 0x80, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff,
-  0xff, 0xff, 0xff, 0xff, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0xf0, 0xff, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x02, 0x00, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01,
-  0x00, 0xc0, 0x27, 0x63, 0x00, 0x08, 0x63, 0x03, 0x06, 0x60, 0x10, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0xe0, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-  0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0,
-  0xff, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0xff, 0x07, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0xc0, 0x27, 0x63,
-  0x00, 0x08, 0x63, 0x03, 0x06, 0x60, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0xe0, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x1f, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe0, 0xff, 0x07, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0xfe, 0xff, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x08, 0xc0, 0xd9, 0x04, 0xb2, 0x01, 0x00, 0xb0,
-  0x31, 0x19, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xf9, 0xff,
-  0xff, 0xff, 0xff, 0x1f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x80, 0xff, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0xfe, 0xff, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01,
-  0x08, 0xc0, 0xd9, 0x04, 0xb2, 0x01, 0x00, 0xb0, 0x31, 0x19, 0x03, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xf9, 0xff, 0xff, 0xff, 0xff, 0x07,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0xff, 0x07, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x0c, 0xc0, 0x1e, 0x63,
-  0x00, 0x30, 0x04, 0x03, 0xc8, 0x60, 0x00, 0x0e, 0x00, 0x00, 0xfc, 0xff,
-  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x07, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x02, 0x04, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x03, 0x0e, 0xc0, 0xe1, 0x18, 0x80, 0x01, 0x60, 0xb0,
-  0x01, 0xe7, 0xf3, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-  0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x02, 0x04, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x07,
-  0x0f, 0xc0, 0xe1, 0x18, 0x80, 0x01, 0x60, 0xb0, 0x01, 0xe7, 0xf3, 0xff,
-  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x07, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x04, 0x04, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x8d, 0x0f, 0xc0, 0x1e, 0x03,
-  0x02, 0x08, 0x04, 0x00, 0xc8, 0xfe, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x06, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0xd8, 0x0f, 0xc0, 0x1e, 0x03, 0x02, 0x08, 0x04, 0x00,
-  0xc8, 0xfe, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-  0xff, 0xff, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0xf8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0xc0, 0x0f, 0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0,
-  0x0b, 0x00, 0x21, 0x64, 0x40, 0xc0, 0x00, 0xb3, 0xf1, 0xfe, 0xff, 0xff,
-  0xff, 0xff, 0xff, 0xff, 0xfb, 0xff, 0xff, 0xff, 0xff, 0xff, 0x01, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0, 0xfb, 0x07, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0x01, 0x00, 0x21, 0x64,
-  0x40, 0xc0, 0x00, 0xb3, 0xf1, 0xfe, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-  0xfb, 0xff, 0xff, 0xff, 0xff, 0x3f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0xfc, 0xfb, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0xfd, 0x00, 0xc0, 0xdf, 0x00, 0x00, 0x06, 0x60, 0x00,
-  0x0e, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-  0xff, 0x3f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0xfe, 0xf9, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xbf,
-  0x01, 0xc0, 0xdf, 0x00, 0x00, 0x06, 0x60, 0x00, 0x0e, 0xff, 0xff, 0xff,
-  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x0f, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe0,
-  0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7e, 0xf0, 0x03, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1f, 0x0b, 0xc0, 0xc0, 0x84,
-  0x31, 0xc0, 0x00, 0x4c, 0xf0, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-  0xff, 0xff, 0xff, 0xff, 0xff, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0, 0x83, 0x07, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x1e, 0xe0, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x0f, 0x0e, 0xc0, 0x3f, 0x18, 0x00, 0x06, 0x84, 0x80,
-  0x09, 0xff, 0xff, 0x3f, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-  0xff, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0xf0, 0xc3, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x07,
-  0x0c, 0xc0, 0x3f, 0x18, 0x00, 0x06, 0x84, 0x80, 0x09, 0xff, 0xff, 0x3f,
-  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x7f, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc8,
-  0xc1, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x04, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x08, 0xc0, 0xc1, 0x03,
-  0x4c, 0x00, 0x00, 0x30, 0xf6, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-  0xff, 0xff, 0xff, 0xff, 0x7f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x90, 0x13, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x01, 0x08, 0xc0, 0xc1, 0x03, 0x4c, 0x00, 0x00, 0x30,
-  0xf6, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-  0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x08, 0x10, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01,
-  0x00, 0xc0, 0x3f, 0x98, 0x01, 0x08, 0x1b, 0x43, 0xc8, 0xff, 0xff, 0xff,
-  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x0f, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08,
-  0x10, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc0, 0x3f, 0x98,
-  0x01, 0x08, 0x1b, 0x43, 0xc8, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-  0xff, 0xff, 0xff, 0xff, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x38, 0x18, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0xe0, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x0e, 0x00, 0xc0, 0xc6, 0x03, 0x40, 0x00, 0x00, 0x80,
-  0x31, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xf7, 0xff, 0xff, 0xff, 0xff,
-  0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0xf8, 0xef, 0x1f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1f,
-  0x00, 0x00, 0x3f, 0x18, 0x0c, 0x30, 0x60, 0x0c, 0xce, 0xff, 0xff, 0xff,
-  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0,
-  0xef, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x06, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1f, 0x00, 0x00, 0x3f, 0x18,
-  0x0c, 0x30, 0x60, 0x0c, 0xce, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-  0xff, 0xff, 0xff, 0x7f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0, 0xc7, 0x0f, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x1f, 0x00, 0x00, 0xde, 0x63, 0x40, 0x06, 0x03, 0x30,
-  0x30, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x7f,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0xc0, 0x83, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x02, 0x00, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0e,
-  0x00, 0x00, 0xde, 0x63, 0x40, 0x06, 0x03, 0x30, 0x30, 0xff, 0xff, 0xff,
-  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x07, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0x04, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x04,
-  0x02, 0x00, 0x00, 0x83, 0xc9, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-  0xff, 0xff, 0xff, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0xfe, 0xff, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0xf0, 0x00, 0x00, 0x38, 0x04, 0x02, 0x00, 0x00, 0x83,
-  0xc9, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x01,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0xc0, 0xff, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0xfe, 0xff, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc,
-  0x03, 0x00, 0xe0, 0x1b, 0x0c, 0x08, 0x18, 0x40, 0x30, 0xfe, 0xff, 0xff,
-  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x01, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0,
-  0xff, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0xff, 0x07, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0x07, 0x00, 0xc0, 0x84,
-  0x81, 0x01, 0x03, 0x0c, 0xc6, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-  0xff, 0xff, 0x3f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0, 0xff, 0x0f, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0xfe, 0xff, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0xfe, 0x07, 0x00, 0xc0, 0x84, 0x81, 0x01, 0x03, 0x0c,
-  0xc6, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x0f, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0xf8, 0xff, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x02, 0x00, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x07,
-  0x0e, 0x00, 0x00, 0x1b, 0x0c, 0x30, 0x80, 0x00, 0x30, 0xf8, 0xff, 0xff,
-  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18,
-  0x10, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0x04, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x08, 0x00, 0x00, 0x1b,
-  0x0c, 0x30, 0x80, 0x00, 0x30, 0xf8, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-  0xff, 0xff, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x20, 0x10, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x01, 0x08, 0x00, 0x00, 0x67, 0xc0, 0x01, 0x04, 0x40,
-  0x00, 0xe1, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x01, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x08, 0x20, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01,
-  0x08, 0x00, 0x00, 0x67, 0xc0, 0x01, 0x04, 0x40, 0x00, 0xe1, 0xff, 0xff,
-  0xff, 0xff, 0xff, 0xff, 0xff, 0x3f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18,
-  0x30, 0x17, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x07, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x08, 0x00, 0x00, 0x9c,
-  0x01, 0x08, 0x60, 0x0c, 0x06, 0x86, 0xff, 0xfd, 0xff, 0xff, 0xff, 0xff,
-  0xff, 0x3f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0xbf, 0x1f, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0xe0, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x07, 0x0e, 0x00, 0x00, 0x18, 0x0c, 0xc0, 0x00, 0x00,
-  0xc0, 0x00, 0xfc, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x03, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0xf0, 0x9f, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe,
-  0x07, 0x00, 0x00, 0x18, 0x0c, 0xc0, 0x00, 0x00, 0xc0, 0x00, 0xfc, 0xff,
-  0xff, 0xff, 0xff, 0xff, 0x1f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0,
-  0x1f, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0x07, 0x00, 0x00, 0xe0,
-  0x01, 0x06, 0x00, 0x30, 0x06, 0x86, 0xf0, 0xff, 0xff, 0xff, 0xff, 0xff,
-  0x1f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc0, 0x07, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x80, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0xfc, 0x03, 0x00, 0x00, 0xe0, 0x01, 0x06, 0x00, 0x30,
-  0x06, 0x86, 0xf0, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x80, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0,
-  0x00, 0x00, 0x00, 0x60, 0x30, 0x00, 0x63, 0x03, 0x30, 0x00, 0xe0, 0xff,
-  0xff, 0xff, 0xff, 0x8f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x01, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x60,
-  0x30, 0x00, 0x63, 0x03, 0x30, 0x00, 0xe0, 0xff, 0xff, 0xff, 0xff, 0x0f,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x80, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x01, 0x08, 0x00, 0x00, 0x80, 0x83, 0x09, 0x18, 0x00,
-  0x00, 0x06, 0x83, 0xff, 0xff, 0xff, 0x7f, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x80, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01,
-  0x08, 0x00, 0x00, 0x80, 0x83, 0x09, 0x18, 0x00, 0x00, 0x06, 0x83, 0xff,
-  0xff, 0xff, 0x7f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x01, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0x0f, 0x00, 0x00, 0x00,
-  0x00, 0xc0, 0x00, 0x8c, 0xc9, 0x60, 0x00, 0xfe, 0xff, 0xff, 0x01, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x80, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0xff, 0x0f, 0x00, 0x00, 0x00, 0x8e, 0x01, 0x84, 0x40,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x80, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff,
-  0x0f, 0x00, 0x00, 0x00, 0x8e, 0x01, 0x84, 0x40, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x01, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0x0f, 0x00, 0x00, 0x00,
-  0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x80, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x01, 0x02, 0x00, 0x00, 0x00, 0x30, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x80, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01,
-  0x04, 0x00, 0x00, 0x00, 0x00, 0xc8, 0x60, 0x83, 0x01, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x01, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0e, 0x00, 0x00, 0x00,
-  0x00, 0xc8, 0x60, 0x83, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, 0x30, 0x06, 0x00, 0x0c,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x0f, 0x00, 0x00, 0x00, 0x80, 0xc1, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x1f, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x06, 0x00, 0x00, 0x00,
-  0x80, 0xc1, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0xe0, 0x7f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x08, 0x60, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0xf8, 0xff, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0xc6,
-  0x03, 0x00, 0x00, 0x00, 0x40, 0x08, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0xff, 0x01, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0xef, 0x07, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0xfc, 0xff, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0xd8, 0xef, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x1c, 0x80, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0xf3,
-  0x0f, 0x00, 0x00, 0x00, 0x80, 0x09, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x06, 0x00, 0x06, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x33, 0x0c, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x06, 0x00, 0x06, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x88, 0x13, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x02, 0x00, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x13,
-  0x08, 0x00, 0x00, 0x00, 0x00, 0x18, 0x0c, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0x04, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x33, 0x0c, 0x00, 0x00, 0x00,
-  0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x88, 0xf3, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x02, 0x00, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0xe3,
-  0x0f, 0x00, 0x00, 0x00, 0x00, 0x86, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0x06, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xd8, 0xe1, 0x1f, 0x00, 0x00, 0x00,
-  0x00, 0x86, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x04, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0xf0, 0xc1, 0x1b, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x04, 0x00, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe0, 0x00,
-  0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0xc0, 0x07, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x60, 0xf0, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe0, 0x01, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0xf8, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0xfc, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc, 0x0f, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x0e, 0x1c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x02, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x10, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x02, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x02, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0e, 0x1c, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0xfc, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0xfc, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0x07, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0xe0, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x10, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x02, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0xfe, 0x1f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0x1f, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0xfe, 0x1f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0xfe, 0x1f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x04, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x02, 0x1c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0xfe, 0x1f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0x1f, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0xfe, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0xfe, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0xf8, 0x3f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0xfc, 0x7f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0xff, 0x01, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0xfe, 0xff, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x06, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x06, 0x10, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x04, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x02, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x02, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0x1f, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0xfe, 0x1f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0xfe, 0x1f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0x1f, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x02, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x02, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1c, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x1e, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x1e, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0c, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0xe0, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0xf8, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc, 0x0f, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0xfc, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x0e, 0x1c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x10, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x02, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x02, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x10, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x0e, 0x1c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0xfc, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc, 0x0f, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0xf8, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0xe0, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x02, 0x00, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0xff, 0x07, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0xfe, 0xff, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0xfe, 0xff, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0xff, 0x07, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  };
diff --git a/ANDROID_3.4.5/arch/m68k/platform/68VZ328/config.c b/ANDROID_3.4.5/arch/m68k/platform/68VZ328/config.c
deleted file mode 100644
index 2ed8dc30..00000000
--- a/ANDROID_3.4.5/arch/m68k/platform/68VZ328/config.c
+++ /dev/null
@@ -1,188 +0,0 @@
-/***************************************************************************/
-
-/*
- *  linux/arch/m68knommu/platform/68VZ328/config.c
- *
- *  Copyright (C) 1993 Hamish Macdonald
- *  Copyright (C) 1999 D. Jeff Dionne
- *  Copyright (C) 2001 Georges Menie, Ken Desmet
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file COPYING in the main directory of this archive
- * for more details.
- */
-
-/***************************************************************************/
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/kd.h>
-#include <linux/netdevice.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/rtc.h>
-
-#include <asm/pgtable.h>
-#include <asm/machdep.h>
-#include <asm/MC68VZ328.h>
-#include <asm/bootstd.h>
-
-#ifdef CONFIG_INIT_LCD
-#include "bootlogo.h"
-#endif
-
-/***************************************************************************/
-
-int m68328_hwclk(int set, struct rtc_time *t);
-
-/***************************************************************************/
-/*                        Init Drangon Engine hardware                     */
-/***************************************************************************/
-#if defined(CONFIG_DRAGEN2)
-
-static void m68vz328_reset(void)
-{
-	local_irq_disable();
-
-#ifdef CONFIG_INIT_LCD
-	PBDATA |= 0x20;				/* disable CCFL light */
-	PKDATA |= 0x4;				/* disable LCD controller */
-	LCKCON = 0;
-#endif
-
-	__asm__ __volatile__(
-		"reset\n\t"
-		"moveal #0x04000000, %a0\n\t"
-		"moveal 0(%a0), %sp\n\t"
-		"moveal 4(%a0), %a0\n\t"
-		"jmp (%a0)"
-	);
-}
-
-static void init_hardware(char *command, int size)
-{
-#ifdef CONFIG_DIRECT_IO_ACCESS
-	SCR = 0x10;					/* allow user access to internal registers */
-#endif
-
-	/* CSGB Init */
-	CSGBB = 0x4000;
-	CSB = 0x1a1;
-
-	/* CS8900 init */
-	/* PK3: hardware sleep function pin, active low */
-	PKSEL |= PK(3);				/* select pin as I/O */
-	PKDIR |= PK(3);				/* select pin as output */
-	PKDATA |= PK(3);			/* set pin high */
-
-	/* PF5: hardware reset function pin, active high */
-	PFSEL |= PF(5);				/* select pin as I/O */
-	PFDIR |= PF(5);				/* select pin as output */
-	PFDATA &= ~PF(5);			/* set pin low */
-
-	/* cs8900 hardware reset */
-	PFDATA |= PF(5);
-	{ int i; for (i = 0; i < 32000; ++i); }
-	PFDATA &= ~PF(5);
-
-	/* INT1 enable (cs8900 IRQ) */
-	PDPOL &= ~PD(1);			/* active high signal */
-	PDIQEG &= ~PD(1);
-	PDIRQEN |= PD(1);			/* IRQ enabled */
-
-#ifdef CONFIG_INIT_LCD
-	/* initialize LCD controller */
-	LSSA = (long) screen_bits;
-	LVPW = 0x14;
-	LXMAX = 0x140;
-	LYMAX = 0xef;
-	LRRA = 0;
-	LPXCD = 3;
-	LPICF = 0x08;
-	LPOLCF = 0;
-	LCKCON = 0x80;
-	PCPDEN = 0xff;
-	PCSEL = 0;
-
-	/* Enable LCD controller */
-	PKDIR |= 0x4;
-	PKSEL |= 0x4;
-	PKDATA &= ~0x4;
-
-	/* Enable CCFL backlighting circuit */
-	PBDIR |= 0x20;
-	PBSEL |= 0x20;
-	PBDATA &= ~0x20;
-
-	/* contrast control register */
-	PFDIR |= 0x1;
-	PFSEL &= ~0x1;
-	PWMR = 0x037F;
-#endif
-}
-
-/***************************************************************************/
-/*                      Init RT-Control uCdimm hardware                    */
-/***************************************************************************/
-#elif defined(CONFIG_UCDIMM)
-
-static void m68vz328_reset(void)
-{
-	local_irq_disable();
-	asm volatile (
-		"moveal #0x10c00000, %a0;\n\t"
-		"moveb #0, 0xFFFFF300;\n\t"
-		"moveal 0(%a0), %sp;\n\t"
-		"moveal 4(%a0), %a0;\n\t"
-		"jmp (%a0);\n"
-	);
-}
-
-unsigned char *cs8900a_hwaddr;
-static int errno;
-
-_bsc0(char *, getserialnum)
-_bsc1(unsigned char *, gethwaddr, int, a)
-_bsc1(char *, getbenv, char *, a)
-
-static void init_hardware(char *command, int size)
-{
-	char *p;
-
-	printk(KERN_INFO "uCdimm serial string [%s]\n", getserialnum());
-	p = cs8900a_hwaddr = gethwaddr(0);
-	printk(KERN_INFO "uCdimm hwaddr %.2x:%.2x:%.2x:%.2x:%.2x:%.2x\n",
-		p[0], p[1], p[2], p[3], p[4], p[5]);
-	p = getbenv("APPEND");
-	if (p)
-		strcpy(p, command);
-	else
-		command[0] = 0;
-}
-
-/***************************************************************************/
-#else
-
-static void m68vz328_reset(void)
-{
-}
-
-static void init_hardware(char *command, int size)
-{
-}
-
-/***************************************************************************/
-#endif
-/***************************************************************************/
-
-void config_BSP(char *command, int size)
-{
-	printk(KERN_INFO "68VZ328 DragonBallVZ support (c) 2001 Lineo, Inc.\n");
-
-	init_hardware(command, size);
-
-	mach_hwclk = m68328_hwclk;
-	mach_reset = m68vz328_reset;
-}
-
-/***************************************************************************/
diff --git a/ANDROID_3.4.5/arch/m68k/platform/Makefile b/ANDROID_3.4.5/arch/m68k/platform/Makefile
deleted file mode 100644
index fc932bf6..00000000
--- a/ANDROID_3.4.5/arch/m68k/platform/Makefile
+++ /dev/null
@@ -1,3 +0,0 @@
-#
-# Makefile for the arch/m68knommu/platform.
-#
diff --git a/ANDROID_3.4.5/arch/m68k/platform/coldfire/Makefile b/ANDROID_3.4.5/arch/m68k/platform/coldfire/Makefile
deleted file mode 100644
index a0815c61..00000000
--- a/ANDROID_3.4.5/arch/m68k/platform/coldfire/Makefile
+++ /dev/null
@@ -1,32 +0,0 @@
-#
-# Makefile for the m68knommu kernel.
-#
-
-#
-# If you want to play with the HW breakpoints then you will
-# need to add define this,  which will give you a stack backtrace
-# on the console port whenever a DBG interrupt occurs. You have to
-# set up you HW breakpoints to trigger a DBG interrupt:
-#
-# ccflags-y := -DTRAP_DBG_INTERRUPT
-# asflags-y := -DTRAP_DBG_INTERRUPT
-#
-
-asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
-
-obj-$(CONFIG_COLDFIRE)	+= cache.o clk.o device.o dma.o entry.o vectors.o
-obj-$(CONFIG_M5206)	+= timers.o intc.o reset.o
-obj-$(CONFIG_M5206e)	+= timers.o intc.o reset.o
-obj-$(CONFIG_M520x)	+= pit.o intc-simr.o reset.o
-obj-$(CONFIG_M523x)	+= pit.o dma_timer.o intc-2.o reset.o
-obj-$(CONFIG_M5249)	+= timers.o intc.o reset.o
-obj-$(CONFIG_M527x)	+= pit.o intc-2.o reset.o
-obj-$(CONFIG_M5272)	+= timers.o
-obj-$(CONFIG_M528x)	+= pit.o intc-2.o reset.o
-obj-$(CONFIG_M5307)	+= timers.o intc.o reset.o
-obj-$(CONFIG_M532x)	+= timers.o intc-simr.o reset.o
-obj-$(CONFIG_M5407)	+= timers.o intc.o reset.o
-obj-$(CONFIG_M54xx)	+= sltimers.o intc-2.o
-
-obj-y			+= pinmux.o gpio.o
-extra-y := head.o
diff --git a/ANDROID_3.4.5/arch/m68k/platform/coldfire/cache.c b/ANDROID_3.4.5/arch/m68k/platform/coldfire/cache.c
deleted file mode 100644
index 71beeaf0..00000000
--- a/ANDROID_3.4.5/arch/m68k/platform/coldfire/cache.c
+++ /dev/null
@@ -1,48 +0,0 @@
-/***************************************************************************/
-
-/*
- *	cache.c -- general ColdFire Cache maintenance code
- *
- *	Copyright (C) 2010, Greg Ungerer (gerg@snapgear.com)
- */
-
-/***************************************************************************/
-
-#include <linux/kernel.h>
-#include <asm/coldfire.h>
-#include <asm/mcfsim.h>
-
-/***************************************************************************/
-#ifdef CACHE_PUSH
-/***************************************************************************/
-
-/*
- *	Use cpushl to push all dirty cache lines back to memory.
- *	Older versions of GAS don't seem to know how to generate the
- *	ColdFire cpushl instruction... Oh well, bit stuff it for now.
- */
-
-void mcf_cache_push(void)
-{
-	__asm__ __volatile__ (
-		"clrl	%%d0\n\t"
-		"1:\n\t"
-		"movel	%%d0,%%a0\n\t"
-		"2:\n\t"
-		".word	0xf468\n\t"
-		"addl	%0,%%a0\n\t"
-		"cmpl	%1,%%a0\n\t"
-		"blt	2b\n\t"
-		"addql	#1,%%d0\n\t"
-		"cmpil	%2,%%d0\n\t"
-		"bne	1b\n\t"
-		: /* No output */
-		: "i" (CACHE_LINE_SIZE),
-		  "i" (DCACHE_SIZE / CACHE_WAYS),
-		  "i" (CACHE_WAYS)
-		: "d0", "a0" );
-}
-
-/***************************************************************************/
-#endif /* CACHE_PUSH */
-/***************************************************************************/
diff --git a/ANDROID_3.4.5/arch/m68k/platform/coldfire/clk.c b/ANDROID_3.4.5/arch/m68k/platform/coldfire/clk.c
deleted file mode 100644
index 9f1260c5..00000000
--- a/ANDROID_3.4.5/arch/m68k/platform/coldfire/clk.c
+++ /dev/null
@@ -1,45 +0,0 @@
-/***************************************************************************/
-
-/*
- *	clk.c -- general ColdFire CPU kernel clk handling
- *
- *	Copyright (C) 2009, Greg Ungerer (gerg@snapgear.com)
- */
-
-/***************************************************************************/
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/clk.h>
-#include <asm/coldfire.h>
-
-/***************************************************************************/
-
-struct clk *clk_get(struct device *dev, const char *id)
-{
-	return NULL;
-}
-EXPORT_SYMBOL(clk_get);
-
-int clk_enable(struct clk *clk)
-{
-	return 0;
-}
-EXPORT_SYMBOL(clk_enable);
-
-void clk_disable(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_disable);
-
-void clk_put(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_put);
-
-unsigned long clk_get_rate(struct clk *clk)
-{
-	return MCF_CLK;
-}
-EXPORT_SYMBOL(clk_get_rate);
-/***************************************************************************/
diff --git a/ANDROID_3.4.5/arch/m68k/platform/coldfire/device.c b/ANDROID_3.4.5/arch/m68k/platform/coldfire/device.c
deleted file mode 100644
index 3aa77dde..00000000
--- a/ANDROID_3.4.5/arch/m68k/platform/coldfire/device.c
+++ /dev/null
@@ -1,318 +0,0 @@
-/*
- * device.c  -- common ColdFire SoC device support
- *
- * (C) Copyright 2011, Greg Ungerer <gerg@uclinux.org>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file COPYING in the main directory of this archive
- * for more details.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/spi/spi.h>
-#include <linux/gpio.h>
-#include <asm/traps.h>
-#include <asm/coldfire.h>
-#include <asm/mcfsim.h>
-#include <asm/mcfuart.h>
-#include <asm/mcfqspi.h>
-
-/*
- *	All current ColdFire parts contain from 2, 3 or 4 UARTS.
- */
-static struct mcf_platform_uart mcf_uart_platform_data[] = {
-	{
-		.mapbase	= MCFUART_BASE0,
-		.irq		= MCF_IRQ_UART0,
-	},
-	{
-		.mapbase	= MCFUART_BASE1,
-		.irq		= MCF_IRQ_UART1,
-	},
-#ifdef MCFUART_BASE2
-	{
-		.mapbase	= MCFUART_BASE2,
-		.irq		= MCF_IRQ_UART2,
-	},
-#endif
-#ifdef MCFUART_BASE3
-	{
-		.mapbase	= MCFUART_BASE3,
-		.irq		= MCF_IRQ_UART3,
-	},
-#endif
-	{ },
-};
-
-static struct platform_device mcf_uart = {
-	.name			= "mcfuart",
-	.id			= 0,
-	.dev.platform_data	= mcf_uart_platform_data,
-};
-
-#ifdef CONFIG_FEC
-/*
- *	Some ColdFire cores contain the Fast Ethernet Controller (FEC)
- *	block. It is Freescale's own hardware block. Some ColdFires
- *	have 2 of these.
- */
-static struct resource mcf_fec0_resources[] = {
-	{
-		.start		= MCFFEC_BASE0,
-		.end		= MCFFEC_BASE0 + MCFFEC_SIZE0 - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= MCF_IRQ_FECRX0,
-		.end		= MCF_IRQ_FECRX0,
-		.flags		= IORESOURCE_IRQ,
-	},
-	{
-		.start		= MCF_IRQ_FECTX0,
-		.end		= MCF_IRQ_FECTX0,
-		.flags		= IORESOURCE_IRQ,
-	},
-	{
-		.start		= MCF_IRQ_FECENTC0,
-		.end		= MCF_IRQ_FECENTC0,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device mcf_fec0 = {
-	.name			= "fec",
-	.id			= 0,
-	.num_resources		= ARRAY_SIZE(mcf_fec0_resources),
-	.resource		= mcf_fec0_resources,
-};
-
-#ifdef MCFFEC_BASE1
-static struct resource mcf_fec1_resources[] = {
-	{
-		.start		= MCFFEC_BASE1,
-		.end		= MCFFEC_BASE1 + MCFFEC_SIZE1 - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= MCF_IRQ_FECRX1,
-		.end		= MCF_IRQ_FECRX1,
-		.flags		= IORESOURCE_IRQ,
-	},
-	{
-		.start		= MCF_IRQ_FECTX1,
-		.end		= MCF_IRQ_FECTX1,
-		.flags		= IORESOURCE_IRQ,
-	},
-	{
-		.start		= MCF_IRQ_FECENTC1,
-		.end		= MCF_IRQ_FECENTC1,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device mcf_fec1 = {
-	.name			= "fec",
-	.id			= 1,
-	.num_resources		= ARRAY_SIZE(mcf_fec1_resources),
-	.resource		= mcf_fec1_resources,
-};
-#endif /* MCFFEC_BASE1 */
-#endif /* CONFIG_FEC */
-
-#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
-/*
- *	The ColdFire QSPI module is an SPI protocol hardware block used
- *	on a number of different ColdFire CPUs.
- */
-static struct resource mcf_qspi_resources[] = {
-	{
-		.start		= MCFQSPI_BASE,
-		.end		= MCFQSPI_BASE + MCFQSPI_SIZE - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= MCF_IRQ_QSPI,
-		.end		= MCF_IRQ_QSPI,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static int mcf_cs_setup(struct mcfqspi_cs_control *cs_control)
-{
-	int status;
-
-	status = gpio_request(MCFQSPI_CS0, "MCFQSPI_CS0");
-	if (status) {
-		pr_debug("gpio_request for MCFQSPI_CS0 failed\n");
-		goto fail0;
-	}
-	status = gpio_direction_output(MCFQSPI_CS0, 1);
-	if (status) {
-		pr_debug("gpio_direction_output for MCFQSPI_CS0 failed\n");
-		goto fail1;
-	}
-
-	status = gpio_request(MCFQSPI_CS1, "MCFQSPI_CS1");
-	if (status) {
-		pr_debug("gpio_request for MCFQSPI_CS1 failed\n");
-		goto fail1;
-	}
-	status = gpio_direction_output(MCFQSPI_CS1, 1);
-	if (status) {
-		pr_debug("gpio_direction_output for MCFQSPI_CS1 failed\n");
-		goto fail2;
-	}
-
-	status = gpio_request(MCFQSPI_CS2, "MCFQSPI_CS2");
-	if (status) {
-		pr_debug("gpio_request for MCFQSPI_CS2 failed\n");
-		goto fail2;
-	}
-	status = gpio_direction_output(MCFQSPI_CS2, 1);
-	if (status) {
-		pr_debug("gpio_direction_output for MCFQSPI_CS2 failed\n");
-		goto fail3;
-	}
-
-#ifdef MCFQSPI_CS3
-	status = gpio_request(MCFQSPI_CS3, "MCFQSPI_CS3");
-	if (status) {
-		pr_debug("gpio_request for MCFQSPI_CS3 failed\n");
-		goto fail3;
-	}
-	status = gpio_direction_output(MCFQSPI_CS3, 1);
-	if (status) {
-		pr_debug("gpio_direction_output for MCFQSPI_CS3 failed\n");
-		gpio_free(MCFQSPI_CS3);
-		goto fail3;
-	}
-#endif
-
-	return 0;
-
-fail3:
-	gpio_free(MCFQSPI_CS2);
-fail2:
-	gpio_free(MCFQSPI_CS1);
-fail1:
-	gpio_free(MCFQSPI_CS0);
-fail0:
-	return status;
-}
-
-static void mcf_cs_teardown(struct mcfqspi_cs_control *cs_control)
-{
-#ifdef MCFQSPI_CS3
-	gpio_free(MCFQSPI_CS3);
-#endif
-	gpio_free(MCFQSPI_CS2);
-	gpio_free(MCFQSPI_CS1);
-	gpio_free(MCFQSPI_CS0);
-}
-
-static void mcf_cs_select(struct mcfqspi_cs_control *cs_control,
-			  u8 chip_select, bool cs_high)
-{
-	switch (chip_select) {
-	case 0:
-		gpio_set_value(MCFQSPI_CS0, cs_high);
-		break;
-	case 1:
-		gpio_set_value(MCFQSPI_CS1, cs_high);
-		break;
-	case 2:
-		gpio_set_value(MCFQSPI_CS2, cs_high);
-		break;
-#ifdef MCFQSPI_CS3
-	case 3:
-		gpio_set_value(MCFQSPI_CS3, cs_high);
-		break;
-#endif
-	}
-}
-
-static void mcf_cs_deselect(struct mcfqspi_cs_control *cs_control,
-			    u8 chip_select, bool cs_high)
-{
-	switch (chip_select) {
-	case 0:
-		gpio_set_value(MCFQSPI_CS0, !cs_high);
-		break;
-	case 1:
-		gpio_set_value(MCFQSPI_CS1, !cs_high);
-		break;
-	case 2:
-		gpio_set_value(MCFQSPI_CS2, !cs_high);
-		break;
-#ifdef MCFQSPI_CS3
-	case 3:
-		gpio_set_value(MCFQSPI_CS3, !cs_high);
-		break;
-#endif
-	}
-}
-
-static struct mcfqspi_cs_control mcf_cs_control = {
-	.setup			= mcf_cs_setup,
-	.teardown		= mcf_cs_teardown,
-	.select			= mcf_cs_select,
-	.deselect		= mcf_cs_deselect,
-};
-
-static struct mcfqspi_platform_data mcf_qspi_data = {
-	.bus_num		= 0,
-	.num_chipselect		= 4,
-	.cs_control		= &mcf_cs_control,
-};
-
-static struct platform_device mcf_qspi = {
-	.name			= "mcfqspi",
-	.id			= 0,
-	.num_resources		= ARRAY_SIZE(mcf_qspi_resources),
-	.resource		= mcf_qspi_resources,
-	.dev.platform_data	= &mcf_qspi_data,
-};
-#endif /* IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) */
-
-static struct platform_device *mcf_devices[] __initdata = {
-	&mcf_uart,
-#ifdef CONFIG_FEC
-	&mcf_fec0,
-#ifdef MCFFEC_BASE1
-	&mcf_fec1,
-#endif
-#endif
-#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
-	&mcf_qspi,
-#endif
-};
-
-/*
- *	Some ColdFire UARTs let you set the IRQ line to use.
- */
-static void __init mcf_uart_set_irq(void)
-{
-#ifdef MCFUART_UIVR
-	/* UART0 interrupt setup */
-	writeb(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI1, MCF_MBAR + MCFSIM_UART1ICR);
-	writeb(MCF_IRQ_UART0, MCFUART_BASE0 + MCFUART_UIVR);
-	mcf_mapirq2imr(MCF_IRQ_UART0, MCFINTC_UART0);
-
-	/* UART1 interrupt setup */
-	writeb(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI2, MCF_MBAR + MCFSIM_UART2ICR);
-	writeb(MCF_IRQ_UART1, MCFUART_BASE1 + MCFUART_UIVR);
-	mcf_mapirq2imr(MCF_IRQ_UART1, MCFINTC_UART1);
-#endif
-}
-
-static int __init mcf_init_devices(void)
-{
-	mcf_uart_set_irq();
-	platform_add_devices(mcf_devices, ARRAY_SIZE(mcf_devices));
-	return 0;
-}
-
-arch_initcall(mcf_init_devices);
-
diff --git a/ANDROID_3.4.5/arch/m68k/platform/coldfire/dma.c b/ANDROID_3.4.5/arch/m68k/platform/coldfire/dma.c
deleted file mode 100644
index df5ce20d..00000000
--- a/ANDROID_3.4.5/arch/m68k/platform/coldfire/dma.c
+++ /dev/null
@@ -1,42 +0,0 @@
-/***************************************************************************/
-
-/*
- *	dma.c -- Freescale ColdFire DMA support
- *
- *	Copyright (C) 2007, Greg Ungerer (gerg@snapgear.com)
- */
-
-/***************************************************************************/
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <asm/dma.h>
-#include <asm/coldfire.h>
-#include <asm/mcfsim.h>
-#include <asm/mcfdma.h>
-
-/***************************************************************************/
-
-/*
- *      DMA channel base address table.
- */
-unsigned int dma_base_addr[MAX_M68K_DMA_CHANNELS] = {
-#ifdef MCFDMA_BASE0
-	MCFDMA_BASE0,
-#endif
-#ifdef MCFDMA_BASE1
-	MCFDMA_BASE1,
-#endif
-#ifdef MCFDMA_BASE2
-	MCFDMA_BASE2,
-#endif
-#ifdef MCFDMA_BASE3
-	MCFDMA_BASE3,
-#endif
-};
-EXPORT_SYMBOL(dma_base_addr);
-
-unsigned int dma_device_address[MAX_M68K_DMA_CHANNELS];
-EXPORT_SYMBOL(dma_device_address);
-
-/***************************************************************************/
diff --git a/ANDROID_3.4.5/arch/m68k/platform/coldfire/dma_timer.c b/ANDROID_3.4.5/arch/m68k/platform/coldfire/dma_timer.c
deleted file mode 100644
index 235ad57c..00000000
--- a/ANDROID_3.4.5/arch/m68k/platform/coldfire/dma_timer.c
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- * dma_timer.c -- Freescale ColdFire DMA Timer.
- *
- * Copyright (C) 2007, Benedikt Spranger <b.spranger@linutronix.de>
- * Copyright (C) 2008. Sebastian Siewior, Linutronix
- *
- */
-
-#include <linux/clocksource.h>
-#include <linux/io.h>
-
-#include <asm/machdep.h>
-#include <asm/coldfire.h>
-#include <asm/mcfpit.h>
-#include <asm/mcfsim.h>
-
-#define DMA_TIMER_0	(0x00)
-#define DMA_TIMER_1	(0x40)
-#define DMA_TIMER_2	(0x80)
-#define DMA_TIMER_3	(0xc0)
-
-#define DTMR0	(MCF_IPSBAR + DMA_TIMER_0 + 0x400)
-#define DTXMR0	(MCF_IPSBAR + DMA_TIMER_0 + 0x402)
-#define DTER0	(MCF_IPSBAR + DMA_TIMER_0 + 0x403)
-#define DTRR0	(MCF_IPSBAR + DMA_TIMER_0 + 0x404)
-#define DTCR0	(MCF_IPSBAR + DMA_TIMER_0 + 0x408)
-#define DTCN0	(MCF_IPSBAR + DMA_TIMER_0 + 0x40c)
-
-#define DMA_FREQ    ((MCF_CLK / 2) / 16)
-
-/* DTMR */
-#define DMA_DTMR_RESTART	(1 << 3)
-#define DMA_DTMR_CLK_DIV_1	(1 << 1)
-#define DMA_DTMR_CLK_DIV_16	(2 << 1)
-#define DMA_DTMR_ENABLE		(1 << 0)
-
-static cycle_t cf_dt_get_cycles(struct clocksource *cs)
-{
-	return __raw_readl(DTCN0);
-}
-
-static struct clocksource clocksource_cf_dt = {
-	.name		= "coldfire_dma_timer",
-	.rating		= 200,
-	.read		= cf_dt_get_cycles,
-	.mask		= CLOCKSOURCE_MASK(32),
-	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
-static int __init  init_cf_dt_clocksource(void)
-{
-	/*
-	 * We setup DMA timer 0 in free run mode. This incrementing counter is
-	 * used as a highly precious clock source. With MCF_CLOCK = 150 MHz we
-	 * get a ~213 ns resolution and the 32bit register will overflow almost
-	 * every 15 minutes.
-	 */
-	__raw_writeb(0x00, DTXMR0);
-	__raw_writeb(0x00, DTER0);
-	__raw_writel(0x00000000, DTRR0);
-	__raw_writew(DMA_DTMR_CLK_DIV_16 | DMA_DTMR_ENABLE, DTMR0);
-	return clocksource_register_hz(&clocksource_cf_dt, DMA_FREQ);
-}
-
-arch_initcall(init_cf_dt_clocksource);
-
-#define CYC2NS_SCALE_FACTOR 10 /* 2^10, carefully chosen */
-#define CYC2NS_SCALE	((1000000 << CYC2NS_SCALE_FACTOR) / (DMA_FREQ / 1000))
-
-static unsigned long long cycles2ns(unsigned long cycl)
-{
-	return (unsigned long long) ((unsigned long long)cycl *
-			CYC2NS_SCALE) >> CYC2NS_SCALE_FACTOR;
-}
-
-unsigned long long sched_clock(void)
-{
-	unsigned long cycl = __raw_readl(DTCN0);
-
-	return cycles2ns(cycl);
-}
diff --git a/ANDROID_3.4.5/arch/m68k/platform/coldfire/entry.S b/ANDROID_3.4.5/arch/m68k/platform/coldfire/entry.S
deleted file mode 100644
index 281e38c2..00000000
--- a/ANDROID_3.4.5/arch/m68k/platform/coldfire/entry.S
+++ /dev/null
@@ -1,203 +0,0 @@
-/*
- *  linux/arch/m68knommu/platform/5307/entry.S
- *
- *  Copyright (C) 1999-2007, Greg Ungerer (gerg@snapgear.com)
- *  Copyright (C) 1998  D. Jeff Dionne <jeff@lineo.ca>,
- *                      Kenneth Albanowski <kjahds@kjahds.com>,
- *  Copyright (C) 2000  Lineo Inc. (www.lineo.com)
- *  Copyright (C) 2004-2006  Macq Electronique SA. (www.macqel.com)
- *
- * Based on:
- *
- *  linux/arch/m68k/kernel/entry.S
- *
- *  Copyright (C) 1991, 1992  Linus Torvalds
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file README.legal in the main directory of this archive
- * for more details.
- *
- * Linux/m68k support by Hamish Macdonald
- *
- * 68060 fixes by Jesper Skov
- * ColdFire support by Greg Ungerer (gerg@snapgear.com)
- * 5307 fixes by David W. Miller
- * linux 2.4 support David McCullough <davidm@snapgear.com>
- * Bug, speed and maintainability fixes by Philippe De Muyter <phdm@macqel.be>
- */
-
-#include <linux/linkage.h>
-#include <asm/unistd.h>
-#include <asm/thread_info.h>
-#include <asm/errno.h>
-#include <asm/setup.h>
-#include <asm/segment.h>
-#include <asm/asm-offsets.h>
-#include <asm/entry.h>
-
-#ifdef CONFIG_COLDFIRE_SW_A7
-/*
- *	Define software copies of the supervisor and user stack pointers.
- */
-.bss
-sw_ksp:
-.long	0
-sw_usp:
-.long	0
-#endif /* CONFIG_COLDFIRE_SW_A7 */
-
-.text
-
-.globl system_call
-.globl resume
-.globl ret_from_exception
-.globl ret_from_signal
-.globl sys_call_table
-.globl inthandler
-
-enosys:
-	mov.l	#sys_ni_syscall,%d3
-	bra	1f
-
-ENTRY(system_call)
-	SAVE_ALL_SYS
-	move	#0x2000,%sr		/* enable intrs again */
-	GET_CURRENT(%d2)
-
-	cmpl	#NR_syscalls,%d0
-	jcc	enosys
-	lea	sys_call_table,%a0
-	lsll	#2,%d0			/* movel %a0@(%d0:l:4),%d3 */
-	movel	%a0@(%d0),%d3
-	jeq	enosys
-
-1:
-	movel	%sp,%d2			/* get thread_info pointer */
-	andl	#-THREAD_SIZE,%d2	/* at start of kernel stack */
-	movel	%d2,%a0
-	movel	%a0@,%a1		/* save top of frame */
-	movel	%sp,%a1@(TASK_THREAD+THREAD_ESP0)
-	btst	#(TIF_SYSCALL_TRACE%8),%a0@(TINFO_FLAGS+(31-TIF_SYSCALL_TRACE)/8)
-	bnes	1f
-
-	movel	%d3,%a0
-	jbsr	%a0@
-	movel	%d0,%sp@(PT_OFF_D0)	/* save the return value */
-	jra	ret_from_exception
-1:
-	movel	#-ENOSYS,%d2		/* strace needs -ENOSYS in PT_OFF_D0 */
-	movel	%d2,PT_OFF_D0(%sp)	/* on syscall entry */
-	subql	#4,%sp
-	SAVE_SWITCH_STACK
-	jbsr	syscall_trace_enter
-	RESTORE_SWITCH_STACK
-	addql	#4,%sp
-	movel	%d3,%a0
-	jbsr	%a0@
-	movel	%d0,%sp@(PT_OFF_D0)		/* save the return value */
-	subql	#4,%sp			/* dummy return address */
-	SAVE_SWITCH_STACK
-	jbsr	syscall_trace_leave
-
-ret_from_signal:
-	RESTORE_SWITCH_STACK
-	addql	#4,%sp
-
-ret_from_exception:
-	move	#0x2700,%sr		/* disable intrs */
-	btst	#5,%sp@(PT_OFF_SR)	/* check if returning to kernel */
-	jeq	Luser_return		/* if so, skip resched, signals */
-
-#ifdef CONFIG_PREEMPT
-	movel	%sp,%d1			/* get thread_info pointer */
-	andl	#-THREAD_SIZE,%d1	/* at base of kernel stack */
-	movel	%d1,%a0
-	movel	%a0@(TINFO_FLAGS),%d1	/* get thread_info->flags */
-	andl	#(1<<TIF_NEED_RESCHED),%d1
-	jeq	Lkernel_return
-
-	movel	%a0@(TINFO_PREEMPT),%d1
-	cmpl	#0,%d1
-	jne	Lkernel_return
-
-	pea	Lkernel_return
-	jmp	preempt_schedule_irq	/* preempt the kernel */
-#endif
-
-Lkernel_return:
-	moveml	%sp@,%d1-%d5/%a0-%a2
-	lea	%sp@(32),%sp		/* space for 8 regs */
-	movel	%sp@+,%d0
-	addql	#4,%sp			/* orig d0 */
-	addl	%sp@+,%sp		/* stk adj */
-	rte
-
-Luser_return:
-	movel	%sp,%d1			/* get thread_info pointer */
-	andl	#-THREAD_SIZE,%d1	/* at base of kernel stack */
-	movel	%d1,%a0
-	moveb	%a0@(TINFO_FLAGS+3),%d1	/* thread_info->flags (low 8 bits) */
-	jne	Lwork_to_do		/* still work to do */
-
-Lreturn:
-	RESTORE_USER
-
-Lwork_to_do:
-	movel	%a0@(TINFO_FLAGS),%d1	/* get thread_info->flags */
-	move	#0x2000,%sr		/* enable intrs again */
-	btst	#TIF_NEED_RESCHED,%d1
-	jne	reschedule
-
-Lsignal_return:
-	subql	#4,%sp			/* dummy return address */
-	SAVE_SWITCH_STACK
-	pea	%sp@(SWITCH_STACK_SIZE)
-	jsr	do_signal
-	addql	#4,%sp
-	RESTORE_SWITCH_STACK
-	addql	#4,%sp
-	jmp	Luser_return
-
-/*
- * This is the generic interrupt handler (for all hardware interrupt
- * sources). Calls up to high level code to do all the work.
- */
-ENTRY(inthandler)
-	SAVE_ALL_INT
-	GET_CURRENT(%d2)
-
-	movew	%sp@(PT_OFF_FORMATVEC),%d0 /* put exception # in d0 */
-	andl	#0x03fc,%d0		/* mask out vector only */
-
-	movel	%sp,%sp@-		/* push regs arg */
-	lsrl	#2,%d0			/* calculate real vector # */
-	movel	%d0,%sp@-		/* push vector number */
-	jbsr	do_IRQ			/* call high level irq handler */
-	lea	%sp@(8),%sp		/* pop args off stack */
-
-	bra	ret_from_exception
-
-/*
- * Beware - when entering resume, prev (the current task) is
- * in a0, next (the new task) is in a1, so don't change these
- * registers until their contents are no longer needed.
- */
-ENTRY(resume)
-	movew	%sr,%d1				 /* save current status */
-	movew	%d1,%a0@(TASK_THREAD+THREAD_SR)
-	movel	%a0,%d1				 /* get prev thread in d1 */
-	SAVE_SWITCH_STACK
-	movel	%sp,%a0@(TASK_THREAD+THREAD_KSP) /* save kernel stack pointer */
-	RDUSP					 /* movel %usp,%a3 */
-	movel	%a3,%a0@(TASK_THREAD+THREAD_USP) /* save thread user stack */
-#ifdef CONFIG_MMU
-	movel	%a1,%a2				 /* set new current */
-#endif
-	movel	%a1@(TASK_THREAD+THREAD_USP),%a3 /* restore thread user stack */
-	WRUSP					 /* movel %a3,%usp */
-	movel	%a1@(TASK_THREAD+THREAD_KSP),%sp /* restore new kernel stack */
-	movew	%a1@(TASK_THREAD+THREAD_SR),%d7	 /* restore new status */
-	movew	%d7,%sr
-	RESTORE_SWITCH_STACK
-	rts
-
diff --git a/ANDROID_3.4.5/arch/m68k/platform/coldfire/gpio.c b/ANDROID_3.4.5/arch/m68k/platform/coldfire/gpio.c
deleted file mode 100644
index 292a1a5a..00000000
--- a/ANDROID_3.4.5/arch/m68k/platform/coldfire/gpio.c
+++ /dev/null
@@ -1,128 +0,0 @@
-/*
- * Coldfire generic GPIO support.
- *
- * (C) Copyright 2009, Steven King <sfking@fdwdc.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/device.h>
-
-#include <asm/gpio.h>
-#include <asm/pinmux.h>
-#include <asm/mcfgpio.h>
-
-#define MCF_CHIP(chip) container_of(chip, struct mcf_gpio_chip, gpio_chip)
-
-int mcf_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
-{
-	unsigned long flags;
-	MCFGPIO_PORTTYPE dir;
-	struct mcf_gpio_chip *mcf_chip = MCF_CHIP(chip);
-
-	local_irq_save(flags);
-	dir = mcfgpio_read(mcf_chip->pddr);
-	dir &= ~mcfgpio_bit(chip->base + offset);
-	mcfgpio_write(dir, mcf_chip->pddr);
-	local_irq_restore(flags);
-
-	return 0;
-}
-
-int mcf_gpio_get_value(struct gpio_chip *chip, unsigned offset)
-{
-	struct mcf_gpio_chip *mcf_chip = MCF_CHIP(chip);
-
-	return mcfgpio_read(mcf_chip->ppdr) & mcfgpio_bit(chip->base + offset);
-}
-
-int mcf_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
-		int value)
-{
-	unsigned long flags;
-	MCFGPIO_PORTTYPE data;
-	struct mcf_gpio_chip *mcf_chip = MCF_CHIP(chip);
-
-	local_irq_save(flags);
-	/* write the value to the output latch */
-	data = mcfgpio_read(mcf_chip->podr);
-	if (value)
-		data |= mcfgpio_bit(chip->base + offset);
-	else
-		data &= ~mcfgpio_bit(chip->base + offset);
-	mcfgpio_write(data, mcf_chip->podr);
-
-	/* now set the direction to output */
-	data = mcfgpio_read(mcf_chip->pddr);
-	data |= mcfgpio_bit(chip->base + offset);
-	mcfgpio_write(data, mcf_chip->pddr);
-	local_irq_restore(flags);
-
-	return 0;
-}
-
-void mcf_gpio_set_value(struct gpio_chip *chip, unsigned offset, int value)
-{
-	struct mcf_gpio_chip *mcf_chip = MCF_CHIP(chip);
-
-	unsigned long flags;
-	MCFGPIO_PORTTYPE data;
-
-	local_irq_save(flags);
-	data = mcfgpio_read(mcf_chip->podr);
-	if (value)
-		data |= mcfgpio_bit(chip->base + offset);
-	else
-		data &= ~mcfgpio_bit(chip->base + offset);
-	mcfgpio_write(data, mcf_chip->podr);
-	local_irq_restore(flags);
-}
-
-void mcf_gpio_set_value_fast(struct gpio_chip *chip, unsigned offset, int value)
-{
-	struct mcf_gpio_chip *mcf_chip = MCF_CHIP(chip);
-
-	if (value)
-		mcfgpio_write(mcfgpio_bit(chip->base + offset), mcf_chip->setr);
-	else
-		mcfgpio_write(~mcfgpio_bit(chip->base + offset), mcf_chip->clrr);
-}
-
-int mcf_gpio_request(struct gpio_chip *chip, unsigned offset)
-{
-	struct mcf_gpio_chip *mcf_chip = MCF_CHIP(chip);
-
-	return mcf_chip->gpio_to_pinmux ?
-		mcf_pinmux_request(mcf_chip->gpio_to_pinmux[offset], 0) : 0;
-}
-
-void mcf_gpio_free(struct gpio_chip *chip, unsigned offset)
-{
-	struct mcf_gpio_chip *mcf_chip = MCF_CHIP(chip);
-
-	mcf_gpio_direction_input(chip, offset);
-
-	if (mcf_chip->gpio_to_pinmux)
-		mcf_pinmux_release(mcf_chip->gpio_to_pinmux[offset], 0);
-}
-
-struct bus_type mcf_gpio_subsys = {
-	.name		= "gpio",
-	.dev_name	= "gpio",
-};
-
-static int __init mcf_gpio_sysinit(void)
-{
-	return subsys_system_register(&mcf_gpio_subsys, NULL);
-}
-
-core_initcall(mcf_gpio_sysinit);
diff --git a/ANDROID_3.4.5/arch/m68k/platform/coldfire/head.S b/ANDROID_3.4.5/arch/m68k/platform/coldfire/head.S
deleted file mode 100644
index c3db70ed..00000000
--- a/ANDROID_3.4.5/arch/m68k/platform/coldfire/head.S
+++ /dev/null
@@ -1,298 +0,0 @@
-/*****************************************************************************/
-
-/*
- *	head.S -- common startup code for ColdFire CPUs.
- *
- *	(C) Copyright 1999-2011, Greg Ungerer <gerg@snapgear.com>.
- */
-
-/*****************************************************************************/
-
-#include <linux/linkage.h>
-#include <linux/init.h>
-#include <asm/asm-offsets.h>
-#include <asm/coldfire.h>
-#include <asm/mcfsim.h>
-#include <asm/mcfmmu.h>
-#include <asm/thread_info.h>
-
-/*****************************************************************************/
-
-/*
- *	If we don't have a fixed memory size, then lets build in code
- *	to auto detect the DRAM size. Obviously this is the preferred
- *	method, and should work for most boards. It won't work for those
- *	that do not have their RAM starting at address 0, and it only
- *	works on SDRAM (not boards fitted with SRAM).
- */
-#if CONFIG_RAMSIZE != 0
-.macro GET_MEM_SIZE
-	movel	#CONFIG_RAMSIZE,%d0	/* hard coded memory size */
-.endm
-
-#elif defined(CONFIG_M5206) || defined(CONFIG_M5206e) || \
-      defined(CONFIG_M5249) || defined(CONFIG_M527x) || \
-      defined(CONFIG_M528x) || defined(CONFIG_M5307) || \
-      defined(CONFIG_M5407)
-/*
- *	Not all these devices have exactly the same DRAM controller,
- *	but the DCMR register is virtually identical - give or take
- *	a couple of bits. The only exception is the 5272 devices, their
- *	DRAM controller is quite different.
- */
-.macro GET_MEM_SIZE
-	movel	MCFSIM_DMR0,%d0		/* get mask for 1st bank */
-	btst	#0,%d0			/* check if region enabled */
-	beq	1f
-	andl	#0xfffc0000,%d0
-	beq	1f
-	addl	#0x00040000,%d0		/* convert mask to size */
-1:
-	movel	MCFSIM_DMR1,%d1		/* get mask for 2nd bank */
-	btst	#0,%d1			/* check if region enabled */
-	beq	2f
-	andl	#0xfffc0000,%d1
-	beq	2f
-	addl	#0x00040000,%d1
-	addl	%d1,%d0			/* total mem size in d0 */
-2:
-.endm
-
-#elif defined(CONFIG_M5272)
-.macro GET_MEM_SIZE
-	movel	MCF_MBAR+MCFSIM_CSOR7,%d0 /* get SDRAM address mask */
-	andil	#0xfffff000,%d0		/* mask out chip select options */
-	negl	%d0			/* negate bits */
-.endm
-
-#elif defined(CONFIG_M520x)
-.macro GET_MEM_SIZE
-	clrl	%d0
-	movel	MCFSIM_SDCS0, %d2	/* Get SDRAM chip select 0 config */
-	andl	#0x1f, %d2		/* Get only the chip select size */
-	beq	3f			/* Check if it is enabled */
-	addql	#1, %d2			/* Form exponent */
-	moveql	#1, %d0
-	lsll	%d2, %d0		/* 2 ^ exponent */
-3:
-	movel	MCFSIM_SDCS1, %d2	/* Get SDRAM chip select 1 config */
-	andl	#0x1f, %d2		/* Get only the chip select size */
-	beq	4f			/* Check if it is enabled */
-	addql	#1, %d2			/* Form exponent */
-	moveql	#1, %d1
-	lsll	%d2, %d1		/* 2 ^ exponent */
-	addl	%d1, %d0		/* Total size of SDRAM in d0 */
-4:
-.endm
-
-#else
-#error "ERROR: I don't know how to probe your boards memory size?"
-#endif
-
-/*****************************************************************************/
-
-/*
- *	Boards and platforms can do specific early hardware setup if
- *	they need to. Most don't need this, define away if not required.
- */
-#ifndef PLATFORM_SETUP
-#define	PLATFORM_SETUP
-#endif
-
-/*****************************************************************************/
-
-.global	_start
-.global _rambase
-.global _ramvec
-.global	_ramstart
-.global	_ramend
-#if defined(CONFIG_UBOOT)
-.global	_init_sp
-#endif
-
-/*****************************************************************************/
-
-.data
-
-/*
- *	During startup we store away the RAM setup. These are not in the
- *	bss, since their values are determined and written before the bss
- *	has been cleared.
- */
-_rambase:
-.long	0
-_ramvec:
-.long	0
-_ramstart:
-.long	0
-_ramend:
-.long	0
-#if defined(CONFIG_UBOOT)
-_init_sp:
-.long	0
-#endif
-
-/*****************************************************************************/
-
-__HEAD
-
-#ifdef CONFIG_MMU
-_start0:
-	jmp	_start
-.global kernel_pg_dir
-.equ	kernel_pg_dir,_start0
-.equ	.,_start0+0x1000
-#endif
-
-/*
- *	This is the codes first entry point. This is where it all
- *	begins...
- */
-
-_start:
-	nop					/* filler */
-	movew	#0x2700, %sr			/* no interrupts */
-	movel	#CACHE_INIT,%d0			/* disable cache */
-	movec	%d0,%CACR
-	nop
-#if defined(CONFIG_UBOOT)
-	movel	%sp,_init_sp			/* save initial stack pointer */
-#endif
-#ifdef CONFIG_MBAR
-	movel	#CONFIG_MBAR+1,%d0		/* configured MBAR address */
-	movec	%d0,%MBAR			/* set it */
-#endif
-
-	/*
-	 *	Do any platform or board specific setup now. Most boards
-	 *	don't need anything. Those exceptions are define this in
-	 *	their board specific includes.
-	 */
-	PLATFORM_SETUP
-
-	/*
-	 *	Create basic memory configuration. Set VBR accordingly,
-	 *	and size memory.
-	 */
-	movel	#CONFIG_VECTORBASE,%a7
-	movec   %a7,%VBR			/* set vectors addr */
-	movel	%a7,_ramvec
-
-	movel	#CONFIG_RAMBASE,%a7		/* mark the base of RAM */
-	movel	%a7,_rambase
-
-	GET_MEM_SIZE				/* macro code determines size */
-	addl	%a7,%d0
-	movel	%d0,_ramend			/* set end ram addr */
-
-	/*
-	 *	Now that we know what the memory is, lets enable cache
-	 *	and get things moving. This is Coldfire CPU specific. Not
-	 *	all version cores have identical cache register setup. But
-	 *	it is very similar. Define the exact settings in the headers
-	 *	then the code here is the same for all.
-	 */
-	movel	#ACR0_MODE,%d0			/* set RAM region for caching */
-	movec	%d0,%ACR0
-	movel	#ACR1_MODE,%d0			/* anything else to cache? */
-	movec	%d0,%ACR1
-#ifdef ACR2_MODE
-	movel	#ACR2_MODE,%d0
-	movec	%d0,%ACR2
-	movel	#ACR3_MODE,%d0
-	movec	%d0,%ACR3
-#endif
-	movel	#CACHE_MODE,%d0			/* enable cache */
-	movec	%d0,%CACR
-	nop
-
-#ifdef CONFIG_MMU
-	/*
-	 *	Identity mapping for the kernel region.
-	 */
-	movel	#(MMUBASE+1),%d0		/* enable MMUBAR registers */
-	movec	%d0,%MMUBAR
-	movel	#MMUOR_CA,%d0			/* clear TLB entries */
-	movel	%d0,MMUOR
-	movel	#0,%d0				/* set ASID to 0 */
-	movec	%d0,%asid
-
-	movel	#MMUCR_EN,%d0			/* Enable the identity map */
-	movel	%d0,MMUCR
-	nop					/* sync i-pipeline */
-
-	movel	#_vstart,%a0			/* jump to "virtual" space */
-	jmp	%a0@
-_vstart:
-#endif /* CONFIG_MMU */
-
-#ifdef CONFIG_ROMFS_FS
-	/*
-	 *	Move ROM filesystem above bss :-)
-	 */
-	lea	_sbss,%a0			/* get start of bss */
-	lea	_ebss,%a1			/* set up destination  */
-	movel	%a0,%a2				/* copy of bss start */
-
-	movel	8(%a0),%d0			/* get size of ROMFS */
-	addql	#8,%d0				/* allow for rounding */
-	andl	#0xfffffffc, %d0		/* whole words */
-
-	addl	%d0,%a0				/* copy from end */
-	addl	%d0,%a1				/* copy from end */
-	movel	%a1,_ramstart			/* set start of ram */
-
-_copy_romfs:
-	movel	-(%a0),%d0			/* copy dword */
-	movel	%d0,-(%a1)
-	cmpl	%a0,%a2				/* check if at end */
-	bne	_copy_romfs
-
-#else /* CONFIG_ROMFS_FS */
-	lea	_ebss,%a1
-	movel	%a1,_ramstart
-#endif /* CONFIG_ROMFS_FS */
-
-
-	/*
-	 *	Zero out the bss region.
-	 */
-	lea	_sbss,%a0			/* get start of bss */
-	lea	_ebss,%a1			/* get end of bss */
-	clrl	%d0				/* set value */
-_clear_bss:
-	movel	%d0,(%a0)+			/* clear each word */
-	cmpl	%a0,%a1				/* check if at end */
-	bne	_clear_bss
-
-	/*
-	 *	Load the current task pointer and stack.
-	 */
-	lea	init_thread_union,%a0
-	lea	THREAD_SIZE(%a0),%sp
-
-#ifdef CONFIG_MMU
-.global m68k_cputype
-.global m68k_mmutype
-.global m68k_fputype
-.global m68k_machtype
-	movel	#CPU_COLDFIRE,%d0
-	movel	%d0,m68k_cputype		/* Mark us as a ColdFire */
-	movel	#MMU_COLDFIRE,%d0
-	movel	%d0,m68k_mmutype
-	movel	#FPU_COLDFIRE,%d0
-	movel	%d0,m68k_fputype
-	movel	#MACH_M54XX,%d0
-	movel	%d0,m68k_machtype		/* Mark us as a 54xx machine */
-	lea	init_task,%a2			/* Set "current" init task */
-#endif
-
-	/*
-	 *	Assember start up done, start code proper.
-	 */
-	jsr	start_kernel			/* start Linux kernel */
-
-_exit:
-	jmp	_exit				/* should never get here */
-
-/*****************************************************************************/
diff --git a/ANDROID_3.4.5/arch/m68k/platform/coldfire/intc-2.c b/ANDROID_3.4.5/arch/m68k/platform/coldfire/intc-2.c
deleted file mode 100644
index 99509335..00000000
--- a/ANDROID_3.4.5/arch/m68k/platform/coldfire/intc-2.c
+++ /dev/null
@@ -1,212 +0,0 @@
-/*
- * intc-2.c
- *
- * General interrupt controller code for the many ColdFire cores that use
- * interrupt controllers with 63 interrupt sources, organized as 56 fully-
- * programmable + 7 fixed-level interrupt sources. This includes the 523x
- * family, the 5270, 5271, 5274, 5275, and the 528x family which have two such
- * controllers, and the 547x and 548x families which have only one of them.
- *
- * The external 7 fixed interrupts are part the the Edge Port unit of these
- * ColdFire parts. They can be configured as level or edge triggered.
- *
- * (C) Copyright 2009-2011, Greg Ungerer <gerg@snapgear.com>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file COPYING in the main directory of this archive
- * for more details.
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <asm/coldfire.h>
-#include <asm/mcfsim.h>
-#include <asm/traps.h>
-
-/*
- * Bit definitions for the ICR family of registers.
- */
-#define MCFSIM_ICR_LEVEL(l)	((l)<<3)	/* Level l intr */
-#define MCFSIM_ICR_PRI(p)	(p)		/* Priority p intr */
-
-/*
- *	The EDGE Port interrupts are the fixed 7 external interrupts.
- *	They need some special treatment, for example they need to be acked.
- */
-#define	EINT0	64	/* Is not actually used, but spot reserved for it */
-#define	EINT1	65	/* EDGE Port interrupt 1 */
-#define	EINT7	71	/* EDGE Port interrupt 7 */
-
-#ifdef MCFICM_INTC1
-#define NR_VECS	128
-#else
-#define NR_VECS	64
-#endif
-
-static void intc_irq_mask(struct irq_data *d)
-{
-	unsigned int irq = d->irq - MCFINT_VECBASE;
-	unsigned long imraddr;
-	u32 val, imrbit;
-
-#ifdef MCFICM_INTC1
-	imraddr = (irq & 0x40) ? MCFICM_INTC1 : MCFICM_INTC0;
-#else
-	imraddr = MCFICM_INTC0;
-#endif
-	imraddr += (irq & 0x20) ? MCFINTC_IMRH : MCFINTC_IMRL;
-	imrbit = 0x1 << (irq & 0x1f);
-
-	val = __raw_readl(imraddr);
-	__raw_writel(val | imrbit, imraddr);
-}
-
-static void intc_irq_unmask(struct irq_data *d)
-{
-	unsigned int irq = d->irq - MCFINT_VECBASE;
-	unsigned long imraddr;
-	u32 val, imrbit;
-
-#ifdef MCFICM_INTC1
-	imraddr = (irq & 0x40) ? MCFICM_INTC1 : MCFICM_INTC0;
-#else
-	imraddr = MCFICM_INTC0;
-#endif
-	imraddr += ((irq & 0x20) ? MCFINTC_IMRH : MCFINTC_IMRL);
-	imrbit = 0x1 << (irq & 0x1f);
-
-	/* Don't set the "maskall" bit! */
-	if ((irq & 0x20) == 0)
-		imrbit |= 0x1;
-
-	val = __raw_readl(imraddr);
-	__raw_writel(val & ~imrbit, imraddr);
-}
-
-/*
- *	Only the external (or EDGE Port) interrupts need to be acknowledged
- *	here, as part of the IRQ handler. They only really need to be ack'ed
- *	if they are in edge triggered mode, but there is no harm in doing it
- *	for all types.
- */
-static void intc_irq_ack(struct irq_data *d)
-{
-	unsigned int irq = d->irq;
-
-	__raw_writeb(0x1 << (irq - EINT0), MCFEPORT_EPFR);
-}
-
-/*
- *	Each vector needs a unique priority and level associated with it.
- *	We don't really care so much what they are, we don't rely on the
- *	traditional priority interrupt scheme of the m68k/ColdFire. This
- *	only needs to be set once for an interrupt, and we will never change
- *	these values once we have set them.
- */
-static u8 intc_intpri = MCFSIM_ICR_LEVEL(6) | MCFSIM_ICR_PRI(6);
-
-static unsigned int intc_irq_startup(struct irq_data *d)
-{
-	unsigned int irq = d->irq - MCFINT_VECBASE;
-	unsigned long icraddr;
-
-#ifdef MCFICM_INTC1
-	icraddr = (irq & 0x40) ? MCFICM_INTC1 : MCFICM_INTC0;
-#else
-	icraddr = MCFICM_INTC0;
-#endif
-	icraddr += MCFINTC_ICR0 + (irq & 0x3f);
-	if (__raw_readb(icraddr) == 0)
-		__raw_writeb(intc_intpri--, icraddr);
-
-	irq = d->irq;
-	if ((irq >= EINT1) && (irq <= EINT7)) {
-		u8 v;
-
-		irq -= EINT0;
-
-		/* Set EPORT line as input */
-		v = __raw_readb(MCFEPORT_EPDDR);
-		__raw_writeb(v & ~(0x1 << irq), MCFEPORT_EPDDR);
-
-		/* Set EPORT line as interrupt source */
-		v = __raw_readb(MCFEPORT_EPIER);
-		__raw_writeb(v | (0x1 << irq), MCFEPORT_EPIER);
-	}
-
-	intc_irq_unmask(d);
-	return 0;
-}
-
-static int intc_irq_set_type(struct irq_data *d, unsigned int type)
-{
-	unsigned int irq = d->irq;
-	u16 pa, tb;
-
-	switch (type) {
-	case IRQ_TYPE_EDGE_RISING:
-		tb = 0x1;
-		break;
-	case IRQ_TYPE_EDGE_FALLING:
-		tb = 0x2;
-		break;
-	case IRQ_TYPE_EDGE_BOTH:
-		tb = 0x3;
-		break;
-	default:
-		/* Level triggered */
-		tb = 0;
-		break;
-	}
-
-	if (tb)
-		irq_set_handler(irq, handle_edge_irq);
-
-	irq -= EINT0;
-	pa = __raw_readw(MCFEPORT_EPPAR);
-	pa = (pa & ~(0x3 << (irq * 2))) | (tb << (irq * 2));
-	__raw_writew(pa, MCFEPORT_EPPAR);
-	
-	return 0;
-}
-
-static struct irq_chip intc_irq_chip = {
-	.name		= "CF-INTC",
-	.irq_startup	= intc_irq_startup,
-	.irq_mask	= intc_irq_mask,
-	.irq_unmask	= intc_irq_unmask,
-};
-
-static struct irq_chip intc_irq_chip_edge_port = {
-	.name		= "CF-INTC-EP",
-	.irq_startup	= intc_irq_startup,
-	.irq_mask	= intc_irq_mask,
-	.irq_unmask	= intc_irq_unmask,
-	.irq_ack	= intc_irq_ack,
-	.irq_set_type	= intc_irq_set_type,
-};
-
-void __init init_IRQ(void)
-{
-	int irq;
-
-	/* Mask all interrupt sources */
-	__raw_writel(0x1, MCFICM_INTC0 + MCFINTC_IMRL);
-#ifdef MCFICM_INTC1
-	__raw_writel(0x1, MCFICM_INTC1 + MCFINTC_IMRL);
-#endif
-
-	for (irq = MCFINT_VECBASE; (irq < MCFINT_VECBASE + NR_VECS); irq++) {
-		if ((irq >= EINT1) && (irq <=EINT7))
-			irq_set_chip(irq, &intc_irq_chip_edge_port);
-		else
-			irq_set_chip(irq, &intc_irq_chip);
-		irq_set_irq_type(irq, IRQ_TYPE_LEVEL_HIGH);
-		irq_set_handler(irq, handle_level_irq);
-	}
-}
-
diff --git a/ANDROID_3.4.5/arch/m68k/platform/coldfire/intc-simr.c b/ANDROID_3.4.5/arch/m68k/platform/coldfire/intc-simr.c
deleted file mode 100644
index 650d52e2..00000000
--- a/ANDROID_3.4.5/arch/m68k/platform/coldfire/intc-simr.c
+++ /dev/null
@@ -1,189 +0,0 @@
-/*
- * intc-simr.c
- *
- * Interrupt controller code for the ColdFire 5208, 5207 & 532x parts.
- *
- * (C) Copyright 2009-2011, Greg Ungerer <gerg@snapgear.com>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file COPYING in the main directory of this archive
- * for more details.
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <asm/coldfire.h>
-#include <asm/mcfsim.h>
-#include <asm/traps.h>
-
-/*
- *	The EDGE Port interrupts are the fixed 7 external interrupts.
- *	They need some special treatment, for example they need to be acked.
- */
-#ifdef CONFIG_M520x
-/*
- *	The 520x parts only support a limited range of these external
- *	interrupts, only 1, 4 and 7 (as interrupts 65, 66 and 67).
- */
-#define	EINT0	64	/* Is not actually used, but spot reserved for it */
-#define	EINT1	65	/* EDGE Port interrupt 1 */
-#define	EINT4	66	/* EDGE Port interrupt 4 */
-#define	EINT7	67	/* EDGE Port interrupt 7 */
-
-static unsigned int irqebitmap[] = { 0, 1, 4, 7 };
-static unsigned int inline irq2ebit(unsigned int irq)
-{
-	return irqebitmap[irq - EINT0];
-}
-
-#else
-
-/*
- *	Most of the ColdFire parts with the EDGE Port module just have
- *	a strait direct mapping of the 7 external interrupts. Although
- *	there is a bit reserved for 0, it is not used.
- */
-#define	EINT0	64	/* Is not actually used, but spot reserved for it */
-#define	EINT1	65	/* EDGE Port interrupt 1 */
-#define	EINT7	71	/* EDGE Port interrupt 7 */
-
-static unsigned int inline irq2ebit(unsigned int irq)
-{
-	return irq - EINT0;
-}
-
-#endif
-
-/*
- *	There maybe one or two interrupt control units, each has 64
- *	interrupts. If there is no second unit then MCFINTC1_* defines
- *	will be 0 (and code for them optimized away).
- */
-
-static void intc_irq_mask(struct irq_data *d)
-{
-	unsigned int irq = d->irq - MCFINT_VECBASE;
-
-	if (MCFINTC1_SIMR && (irq > 64))
-		__raw_writeb(irq - 64, MCFINTC1_SIMR);
-	else
-		__raw_writeb(irq, MCFINTC0_SIMR);
-}
-
-static void intc_irq_unmask(struct irq_data *d)
-{
-	unsigned int irq = d->irq - MCFINT_VECBASE;
-
-	if (MCFINTC1_CIMR && (irq > 64))
-		__raw_writeb(irq - 64, MCFINTC1_CIMR);
-	else
-		__raw_writeb(irq, MCFINTC0_CIMR);
-}
-
-static void intc_irq_ack(struct irq_data *d)
-{
-	unsigned int ebit = irq2ebit(d->irq);
-
-	__raw_writeb(0x1 << ebit, MCFEPORT_EPFR);
-}
-
-static unsigned int intc_irq_startup(struct irq_data *d)
-{
-	unsigned int irq = d->irq;
-
-	if ((irq >= EINT1) && (irq <= EINT7)) {
-		unsigned int ebit = irq2ebit(irq);
-		u8 v;
-
-		/* Set EPORT line as input */
-		v = __raw_readb(MCFEPORT_EPDDR);
-		__raw_writeb(v & ~(0x1 << ebit), MCFEPORT_EPDDR);
-
-		/* Set EPORT line as interrupt source */
-		v = __raw_readb(MCFEPORT_EPIER);
-		__raw_writeb(v | (0x1 << ebit), MCFEPORT_EPIER);
-	}
-
-	irq -= MCFINT_VECBASE;
-	if (MCFINTC1_ICR0 && (irq > 64))
-		__raw_writeb(5, MCFINTC1_ICR0 + irq - 64);
-	else
-		__raw_writeb(5, MCFINTC0_ICR0 + irq);
-
-
-	intc_irq_unmask(d);
-	return 0;
-}
-
-static int intc_irq_set_type(struct irq_data *d, unsigned int type)
-{
-	unsigned int ebit, irq = d->irq;
-	u16 pa, tb;
-
-	switch (type) {
-	case IRQ_TYPE_EDGE_RISING:
-		tb = 0x1;
-		break;
-	case IRQ_TYPE_EDGE_FALLING:
-		tb = 0x2;
-		break;
-	case IRQ_TYPE_EDGE_BOTH:
-		tb = 0x3;
-		break;
-	default:
-		/* Level triggered */
-		tb = 0;
-		break;
-	}
-
-	if (tb)
-		irq_set_handler(irq, handle_edge_irq);
-
-	ebit = irq2ebit(irq) * 2;
-	pa = __raw_readw(MCFEPORT_EPPAR);
-	pa = (pa & ~(0x3 << ebit)) | (tb << ebit);
-	__raw_writew(pa, MCFEPORT_EPPAR);
-	
-	return 0;
-}
-
-static struct irq_chip intc_irq_chip = {
-	.name		= "CF-INTC",
-	.irq_startup	= intc_irq_startup,
-	.irq_mask	= intc_irq_mask,
-	.irq_unmask	= intc_irq_unmask,
-};
-
-static struct irq_chip intc_irq_chip_edge_port = {
-	.name		= "CF-INTC-EP",
-	.irq_startup	= intc_irq_startup,
-	.irq_mask	= intc_irq_mask,
-	.irq_unmask	= intc_irq_unmask,
-	.irq_ack	= intc_irq_ack,
-	.irq_set_type	= intc_irq_set_type,
-};
-
-void __init init_IRQ(void)
-{
-	int irq, eirq;
-
-	/* Mask all interrupt sources */
-	__raw_writeb(0xff, MCFINTC0_SIMR);
-	if (MCFINTC1_SIMR)
-		__raw_writeb(0xff, MCFINTC1_SIMR);
-
-	eirq = MCFINT_VECBASE + 64 + (MCFINTC1_ICR0 ? 64 : 0);
-	for (irq = MCFINT_VECBASE; (irq < eirq); irq++) {
-		if ((irq >= EINT1) && (irq <= EINT7))
-			irq_set_chip(irq, &intc_irq_chip_edge_port);
-		else
-			irq_set_chip(irq, &intc_irq_chip);
-		irq_set_irq_type(irq, IRQ_TYPE_LEVEL_HIGH);
-		irq_set_handler(irq, handle_level_irq);
-	}
-}
-
diff --git a/ANDROID_3.4.5/arch/m68k/platform/coldfire/intc.c b/ANDROID_3.4.5/arch/m68k/platform/coldfire/intc.c
deleted file mode 100644
index 5c0c150b..00000000
--- a/ANDROID_3.4.5/arch/m68k/platform/coldfire/intc.c
+++ /dev/null
@@ -1,150 +0,0 @@
-/*
- * intc.c  -- support for the old ColdFire interrupt controller
- *
- * (C) Copyright 2009, Greg Ungerer <gerg@snapgear.com>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file COPYING in the main directory of this archive
- * for more details.
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <asm/traps.h>
-#include <asm/coldfire.h>
-#include <asm/mcfsim.h>
-
-/*
- * The mapping of irq number to a mask register bit is not one-to-one.
- * The irq numbers are either based on "level" of interrupt or fixed
- * for an autovector-able interrupt. So we keep a local data structure
- * that maps from irq to mask register. Not all interrupts will have
- * an IMR bit.
- */
-unsigned char mcf_irq2imr[NR_IRQS];
-
-/*
- * Define the miniumun and maximum external interrupt numbers.
- * This is also used as the "level" interrupt numbers.
- */
-#define	EIRQ1	25
-#define	EIRQ7	31
-
-/*
- * In the early version 2 core ColdFire parts the IMR register was 16 bits
- * in size. Version 3 (and later version 2) core parts have a 32 bit
- * sized IMR register. Provide some size independent methods to access the
- * IMR register.
- */
-#ifdef MCFSIM_IMR_IS_16BITS
-
-void mcf_setimr(int index)
-{
-	u16 imr;
-	imr = __raw_readw(MCF_MBAR + MCFSIM_IMR);
-	__raw_writew(imr | (0x1 << index), MCF_MBAR + MCFSIM_IMR);
-}
-
-void mcf_clrimr(int index)
-{
-	u16 imr;
-	imr = __raw_readw(MCF_MBAR + MCFSIM_IMR);
-	__raw_writew(imr & ~(0x1 << index), MCF_MBAR + MCFSIM_IMR);
-}
-
-void mcf_maskimr(unsigned int mask)
-{
-	u16 imr;
-	imr = __raw_readw(MCF_MBAR + MCFSIM_IMR);
-	imr |= mask;
-	__raw_writew(imr, MCF_MBAR + MCFSIM_IMR);
-}
-
-#else
-
-void mcf_setimr(int index)
-{
-	u32 imr;
-	imr = __raw_readl(MCF_MBAR + MCFSIM_IMR);
-	__raw_writel(imr | (0x1 << index), MCF_MBAR + MCFSIM_IMR);
-}
-
-void mcf_clrimr(int index)
-{
-	u32 imr;
-	imr = __raw_readl(MCF_MBAR + MCFSIM_IMR);
-	__raw_writel(imr & ~(0x1 << index), MCF_MBAR + MCFSIM_IMR);
-}
-
-void mcf_maskimr(unsigned int mask)
-{
-	u32 imr;
-	imr = __raw_readl(MCF_MBAR + MCFSIM_IMR);
-	imr |= mask;
-	__raw_writel(imr, MCF_MBAR + MCFSIM_IMR);
-}
-
-#endif
-
-/*
- * Interrupts can be "vectored" on the ColdFire cores that support this old
- * interrupt controller. That is, the device raising the interrupt can also
- * supply the vector number to interrupt through. The AVR register of the
- * interrupt controller enables or disables this for each external interrupt,
- * so provide generic support for this. Setting this up is out-of-band for
- * the interrupt system API's, and needs to be done by the driver that
- * supports this device. Very few devices actually use this.
- */
-void mcf_autovector(int irq)
-{
-#ifdef MCFSIM_AVR
-	if ((irq >= EIRQ1) && (irq <= EIRQ7)) {
-		u8 avec;
-		avec = __raw_readb(MCF_MBAR + MCFSIM_AVR);
-		avec |= (0x1 << (irq - EIRQ1 + 1));
-		__raw_writeb(avec, MCF_MBAR + MCFSIM_AVR);
-	}
-#endif
-}
-
-static void intc_irq_mask(struct irq_data *d)
-{
-	if (mcf_irq2imr[d->irq])
-		mcf_setimr(mcf_irq2imr[d->irq]);
-}
-
-static void intc_irq_unmask(struct irq_data *d)
-{
-	if (mcf_irq2imr[d->irq])
-		mcf_clrimr(mcf_irq2imr[d->irq]);
-}
-
-static int intc_irq_set_type(struct irq_data *d, unsigned int type)
-{
-	return 0;
-}
-
-static struct irq_chip intc_irq_chip = {
-	.name		= "CF-INTC",
-	.irq_mask	= intc_irq_mask,
-	.irq_unmask	= intc_irq_unmask,
-	.irq_set_type	= intc_irq_set_type,
-};
-
-void __init init_IRQ(void)
-{
-	int irq;
-
-	mcf_maskimr(0xffffffff);
-
-	for (irq = 0; (irq < NR_IRQS); irq++) {
-		irq_set_chip(irq, &intc_irq_chip);
-		irq_set_irq_type(irq, IRQ_TYPE_LEVEL_HIGH);
-		irq_set_handler(irq, handle_level_irq);
-	}
-}
-
diff --git a/ANDROID_3.4.5/arch/m68k/platform/coldfire/pinmux.c b/ANDROID_3.4.5/arch/m68k/platform/coldfire/pinmux.c
deleted file mode 100644
index 8c62b825..00000000
--- a/ANDROID_3.4.5/arch/m68k/platform/coldfire/pinmux.c
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * Coldfire generic GPIO pinmux support.
- *
- * (C) Copyright 2009, Steven King <sfking@fdwdc.com>
- *
- *  This program is free software; you can redistribute it and/or modify
- *   it under the terms of the GNU General Public License as published by
- *   the Free Software Foundation; version 2 of the License.
- *
- *   This program is distributed in the hope that it will be useful,
- *   but WITHOUT ANY WARRANTY; without even the implied warranty of
- *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *   GNU General Public License for more details.
- *
- */
-
-#include <linux/kernel.h>
-
-#include <asm/pinmux.h>
-
-int mcf_pinmux_request(unsigned pinmux, unsigned func)
-{
-	return 0;
-}
-
-void mcf_pinmux_release(unsigned pinmux, unsigned func)
-{
-}
diff --git a/ANDROID_3.4.5/arch/m68k/platform/coldfire/pit.c b/ANDROID_3.4.5/arch/m68k/platform/coldfire/pit.c
deleted file mode 100644
index e62dbbcb..00000000
--- a/ANDROID_3.4.5/arch/m68k/platform/coldfire/pit.c
+++ /dev/null
@@ -1,167 +0,0 @@
-/***************************************************************************/
-
-/*
- *	pit.c -- Freescale ColdFire PIT timer. Currently this type of
- *	         hardware timer only exists in the Freescale ColdFire
- *		 5270/5271, 5282 and 5208 CPUs. No doubt newer ColdFire
- *		 family members will probably use it too.
- *
- *	Copyright (C) 1999-2008, Greg Ungerer (gerg@snapgear.com)
- *	Copyright (C) 2001-2004, SnapGear Inc. (www.snapgear.com)
- */
-
-/***************************************************************************/
-
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/param.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/clockchips.h>
-#include <asm/machdep.h>
-#include <asm/io.h>
-#include <asm/coldfire.h>
-#include <asm/mcfpit.h>
-#include <asm/mcfsim.h>
-
-/***************************************************************************/
-
-/*
- *	By default use timer1 as the system clock timer.
- */
-#define	FREQ	((MCF_CLK / 2) / 64)
-#define	TA(a)	(MCFPIT_BASE1 + (a))
-#define PIT_CYCLES_PER_JIFFY (FREQ / HZ)
-
-static u32 pit_cnt;
-
-/*
- * Initialize the PIT timer.
- *
- * This is also called after resume to bring the PIT into operation again.
- */
-
-static void init_cf_pit_timer(enum clock_event_mode mode,
-                             struct clock_event_device *evt)
-{
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-
-		__raw_writew(MCFPIT_PCSR_DISABLE, TA(MCFPIT_PCSR));
-		__raw_writew(PIT_CYCLES_PER_JIFFY, TA(MCFPIT_PMR));
-		__raw_writew(MCFPIT_PCSR_EN | MCFPIT_PCSR_PIE | \
-				MCFPIT_PCSR_OVW | MCFPIT_PCSR_RLD | \
-				MCFPIT_PCSR_CLK64, TA(MCFPIT_PCSR));
-		break;
-
-	case CLOCK_EVT_MODE_SHUTDOWN:
-	case CLOCK_EVT_MODE_UNUSED:
-
-		__raw_writew(MCFPIT_PCSR_DISABLE, TA(MCFPIT_PCSR));
-		break;
-
-	case CLOCK_EVT_MODE_ONESHOT:
-
-		__raw_writew(MCFPIT_PCSR_DISABLE, TA(MCFPIT_PCSR));
-		__raw_writew(MCFPIT_PCSR_EN | MCFPIT_PCSR_PIE | \
-				MCFPIT_PCSR_OVW | MCFPIT_PCSR_CLK64, \
-				TA(MCFPIT_PCSR));
-		break;
-
-	case CLOCK_EVT_MODE_RESUME:
-		/* Nothing to do here */
-		break;
-	}
-}
-
-/*
- * Program the next event in oneshot mode
- *
- * Delta is given in PIT ticks
- */
-static int cf_pit_next_event(unsigned long delta,
-		struct clock_event_device *evt)
-{
-	__raw_writew(delta, TA(MCFPIT_PMR));
-	return 0;
-}
-
-struct clock_event_device cf_pit_clockevent = {
-	.name		= "pit",
-	.features	= CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
-	.set_mode	= init_cf_pit_timer,
-	.set_next_event	= cf_pit_next_event,
-	.shift		= 32,
-	.irq		= MCFINT_VECBASE + MCFINT_PIT1,
-};
-
-
-
-/***************************************************************************/
-
-static irqreturn_t pit_tick(int irq, void *dummy)
-{
-	struct clock_event_device *evt = &cf_pit_clockevent;
-	u16 pcsr;
-
-	/* Reset the ColdFire timer */
-	pcsr = __raw_readw(TA(MCFPIT_PCSR));
-	__raw_writew(pcsr | MCFPIT_PCSR_PIF, TA(MCFPIT_PCSR));
-
-	pit_cnt += PIT_CYCLES_PER_JIFFY;
-	evt->event_handler(evt);
-	return IRQ_HANDLED;
-}
-
-/***************************************************************************/
-
-static struct irqaction pit_irq = {
-	.name	 = "timer",
-	.flags	 = IRQF_DISABLED | IRQF_TIMER,
-	.handler = pit_tick,
-};
-
-/***************************************************************************/
-
-static cycle_t pit_read_clk(struct clocksource *cs)
-{
-	unsigned long flags;
-	u32 cycles;
-	u16 pcntr;
-
-	local_irq_save(flags);
-	pcntr = __raw_readw(TA(MCFPIT_PCNTR));
-	cycles = pit_cnt;
-	local_irq_restore(flags);
-
-	return cycles + PIT_CYCLES_PER_JIFFY - pcntr;
-}
-
-/***************************************************************************/
-
-static struct clocksource pit_clk = {
-	.name	= "pit",
-	.rating	= 100,
-	.read	= pit_read_clk,
-	.mask	= CLOCKSOURCE_MASK(32),
-};
-
-/***************************************************************************/
-
-void hw_timer_init(irq_handler_t handler)
-{
-	cf_pit_clockevent.cpumask = cpumask_of(smp_processor_id());
-	cf_pit_clockevent.mult = div_sc(FREQ, NSEC_PER_SEC, 32);
-	cf_pit_clockevent.max_delta_ns =
-		clockevent_delta2ns(0xFFFF, &cf_pit_clockevent);
-	cf_pit_clockevent.min_delta_ns =
-		clockevent_delta2ns(0x3f, &cf_pit_clockevent);
-	clockevents_register_device(&cf_pit_clockevent);
-
-	setup_irq(MCFINT_VECBASE + MCFINT_PIT1, &pit_irq);
-
-	clocksource_register_hz(&pit_clk, FREQ);
-}
-
-/***************************************************************************/
diff --git a/ANDROID_3.4.5/arch/m68k/platform/coldfire/reset.c b/ANDROID_3.4.5/arch/m68k/platform/coldfire/reset.c
deleted file mode 100644
index 933e54ea..00000000
--- a/ANDROID_3.4.5/arch/m68k/platform/coldfire/reset.c
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * reset.c  -- common ColdFire SoC reset support
- *
- * (C) Copyright 2012, Greg Ungerer <gerg@uclinux.org>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file COPYING in the main directory of this archive
- * for more details.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <asm/machdep.h>
-#include <asm/coldfire.h>
-#include <asm/mcfsim.h>
-
-/*
- *	There are 2 common methods amongst the ColdFure parts for reseting
- *	the CPU. But there are couple of exceptions, the 5272 and the 547x
- *	have something completely special to them, and we let their specific
- *	subarch code handle them.
- */
-
-#ifdef MCFSIM_SYPCR
-static void mcf_cpu_reset(void)
-{
-	local_irq_disable();
-	/* Set watchdog to soft reset, and enabled */
-	__raw_writeb(0xc0, MCF_MBAR + MCFSIM_SYPCR);
-	for (;;)
-		/* wait for watchdog to timeout */;
-}
-#endif
-
-#ifdef MCF_RCR
-static void mcf_cpu_reset(void)
-{
-	local_irq_disable();
-	__raw_writeb(MCF_RCR_SWRESET, MCF_RCR);
-}
-#endif
-
-static int __init mcf_setup_reset(void)
-{
-	mach_reset = mcf_cpu_reset;
-	return 0;
-}
-
-arch_initcall(mcf_setup_reset);
diff --git a/ANDROID_3.4.5/arch/m68k/platform/coldfire/sltimers.c b/ANDROID_3.4.5/arch/m68k/platform/coldfire/sltimers.c
deleted file mode 100644
index 2027fc20..00000000
--- a/ANDROID_3.4.5/arch/m68k/platform/coldfire/sltimers.c
+++ /dev/null
@@ -1,149 +0,0 @@
-/***************************************************************************/
-
-/*
- *	sltimers.c -- generic ColdFire slice timer support.
- *
- *	Copyright (C) 2009-2010, Philippe De Muyter <phdm@macqel.be>
- *	based on
- *	timers.c -- generic ColdFire hardware timer support.
- *	Copyright (C) 1999-2008, Greg Ungerer <gerg@snapgear.com>
- */
-
-/***************************************************************************/
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/profile.h>
-#include <linux/clocksource.h>
-#include <asm/io.h>
-#include <asm/traps.h>
-#include <asm/machdep.h>
-#include <asm/coldfire.h>
-#include <asm/mcfslt.h>
-#include <asm/mcfsim.h>
-
-/***************************************************************************/
-
-#ifdef CONFIG_HIGHPROFILE
-
-/*
- *	By default use Slice Timer 1 as the profiler clock timer.
- */
-#define	PA(a)	(MCF_MBAR + MCFSLT_TIMER1 + (a))
-
-/*
- *	Choose a reasonably fast profile timer. Make it an odd value to
- *	try and get good coverage of kernel operations.
- */
-#define	PROFILEHZ	1013
-
-irqreturn_t mcfslt_profile_tick(int irq, void *dummy)
-{
-	/* Reset Slice Timer 1 */
-	__raw_writel(MCFSLT_SSR_BE | MCFSLT_SSR_TE, PA(MCFSLT_SSR));
-	if (current->pid)
-		profile_tick(CPU_PROFILING);
-	return IRQ_HANDLED;
-}
-
-static struct irqaction mcfslt_profile_irq = {
-	.name	 = "profile timer",
-	.flags	 = IRQF_DISABLED | IRQF_TIMER,
-	.handler = mcfslt_profile_tick,
-};
-
-void mcfslt_profile_init(void)
-{
-	printk(KERN_INFO "PROFILE: lodging TIMER 1 @ %dHz as profile timer\n",
-	       PROFILEHZ);
-
-	setup_irq(MCF_IRQ_PROFILER, &mcfslt_profile_irq);
-
-	/* Set up TIMER 2 as high speed profile clock */
-	__raw_writel(MCF_BUSCLK / PROFILEHZ - 1, PA(MCFSLT_STCNT));
-	__raw_writel(MCFSLT_SCR_RUN | MCFSLT_SCR_IEN | MCFSLT_SCR_TEN,
-								PA(MCFSLT_SCR));
-
-}
-
-#endif	/* CONFIG_HIGHPROFILE */
-
-/***************************************************************************/
-
-/*
- *	By default use Slice Timer 0 as the system clock timer.
- */
-#define	TA(a)	(MCF_MBAR + MCFSLT_TIMER0 + (a))
-
-static u32 mcfslt_cycles_per_jiffy;
-static u32 mcfslt_cnt;
-
-static irq_handler_t timer_interrupt;
-
-static irqreturn_t mcfslt_tick(int irq, void *dummy)
-{
-	/* Reset Slice Timer 0 */
-	__raw_writel(MCFSLT_SSR_BE | MCFSLT_SSR_TE, TA(MCFSLT_SSR));
-	mcfslt_cnt += mcfslt_cycles_per_jiffy;
-	return timer_interrupt(irq, dummy);
-}
-
-static struct irqaction mcfslt_timer_irq = {
-	.name	 = "timer",
-	.flags	 = IRQF_DISABLED | IRQF_TIMER,
-	.handler = mcfslt_tick,
-};
-
-static cycle_t mcfslt_read_clk(struct clocksource *cs)
-{
-	unsigned long flags;
-	u32 cycles, scnt;
-
-	local_irq_save(flags);
-	scnt = __raw_readl(TA(MCFSLT_SCNT));
-	cycles = mcfslt_cnt;
-	if (__raw_readl(TA(MCFSLT_SSR)) & MCFSLT_SSR_TE) {
-		cycles += mcfslt_cycles_per_jiffy;
-		scnt = __raw_readl(TA(MCFSLT_SCNT));
-	}
-	local_irq_restore(flags);
-
-	/* subtract because slice timers count down */
-	return cycles + ((mcfslt_cycles_per_jiffy - 1) - scnt);
-}
-
-static struct clocksource mcfslt_clk = {
-	.name	= "slt",
-	.rating	= 250,
-	.read	= mcfslt_read_clk,
-	.mask	= CLOCKSOURCE_MASK(32),
-	.flags	= CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
-void hw_timer_init(irq_handler_t handler)
-{
-	mcfslt_cycles_per_jiffy = MCF_BUSCLK / HZ;
-	/*
-	 *	The coldfire slice timer (SLT) runs from STCNT to 0 included,
-	 *	then STCNT again and so on.  It counts thus actually
-	 *	STCNT + 1 steps for 1 tick, not STCNT.  So if you want
-	 *	n cycles, initialize STCNT with n - 1.
-	 */
-	__raw_writel(mcfslt_cycles_per_jiffy - 1, TA(MCFSLT_STCNT));
-	__raw_writel(MCFSLT_SCR_RUN | MCFSLT_SCR_IEN | MCFSLT_SCR_TEN,
-								TA(MCFSLT_SCR));
-	/* initialize mcfslt_cnt knowing that slice timers count down */
-	mcfslt_cnt = mcfslt_cycles_per_jiffy;
-
-	timer_interrupt = handler;
-	setup_irq(MCF_IRQ_TIMER, &mcfslt_timer_irq);
-
-	clocksource_register_hz(&mcfslt_clk, MCF_BUSCLK);
-
-#ifdef CONFIG_HIGHPROFILE
-	mcfslt_profile_init();
-#endif
-}
diff --git a/ANDROID_3.4.5/arch/m68k/platform/coldfire/timers.c b/ANDROID_3.4.5/arch/m68k/platform/coldfire/timers.c
deleted file mode 100644
index ed96ce50..00000000
--- a/ANDROID_3.4.5/arch/m68k/platform/coldfire/timers.c
+++ /dev/null
@@ -1,195 +0,0 @@
-/***************************************************************************/
-
-/*
- *	timers.c -- generic ColdFire hardware timer support.
- *
- *	Copyright (C) 1999-2008, Greg Ungerer <gerg@snapgear.com>
- */
-
-/***************************************************************************/
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/profile.h>
-#include <linux/clocksource.h>
-#include <asm/io.h>
-#include <asm/traps.h>
-#include <asm/machdep.h>
-#include <asm/coldfire.h>
-#include <asm/mcftimer.h>
-#include <asm/mcfsim.h>
-
-/***************************************************************************/
-
-/*
- *	By default use timer1 as the system clock timer.
- */
-#define	FREQ	(MCF_BUSCLK / 16)
-#define	TA(a)	(MCFTIMER_BASE1 + (a))
-
-/*
- *	These provide the underlying interrupt vector support.
- *	Unfortunately it is a little different on each ColdFire.
- */
-void coldfire_profile_init(void);
-
-#if defined(CONFIG_M532x)
-#define	__raw_readtrr	__raw_readl
-#define	__raw_writetrr	__raw_writel
-#else
-#define	__raw_readtrr	__raw_readw
-#define	__raw_writetrr	__raw_writew
-#endif
-
-static u32 mcftmr_cycles_per_jiffy;
-static u32 mcftmr_cnt;
-
-static irq_handler_t timer_interrupt;
-
-/***************************************************************************/
-
-static void init_timer_irq(void)
-{
-#ifdef MCFSIM_ICR_AUTOVEC
-	/* Timer1 is always used as system timer */
-	writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI3,
-		MCF_MBAR + MCFSIM_TIMER1ICR);
-	mcf_mapirq2imr(MCF_IRQ_TIMER, MCFINTC_TIMER1);
-
-#ifdef CONFIG_HIGHPROFILE
-	/* Timer2 is to be used as a high speed profile timer  */
-	writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL7 | MCFSIM_ICR_PRI3,
-		MCF_MBAR + MCFSIM_TIMER2ICR);
-	mcf_mapirq2imr(MCF_IRQ_PROFILER, MCFINTC_TIMER2);
-#endif
-#endif /* MCFSIM_ICR_AUTOVEC */
-}
-
-/***************************************************************************/
-
-static irqreturn_t mcftmr_tick(int irq, void *dummy)
-{
-	/* Reset the ColdFire timer */
-	__raw_writeb(MCFTIMER_TER_CAP | MCFTIMER_TER_REF, TA(MCFTIMER_TER));
-
-	mcftmr_cnt += mcftmr_cycles_per_jiffy;
-	return timer_interrupt(irq, dummy);
-}
-
-/***************************************************************************/
-
-static struct irqaction mcftmr_timer_irq = {
-	.name	 = "timer",
-	.flags	 = IRQF_DISABLED | IRQF_TIMER,
-	.handler = mcftmr_tick,
-};
-
-/***************************************************************************/
-
-static cycle_t mcftmr_read_clk(struct clocksource *cs)
-{
-	unsigned long flags;
-	u32 cycles;
-	u16 tcn;
-
-	local_irq_save(flags);
-	tcn = __raw_readw(TA(MCFTIMER_TCN));
-	cycles = mcftmr_cnt;
-	local_irq_restore(flags);
-
-	return cycles + tcn;
-}
-
-/***************************************************************************/
-
-static struct clocksource mcftmr_clk = {
-	.name	= "tmr",
-	.rating	= 250,
-	.read	= mcftmr_read_clk,
-	.mask	= CLOCKSOURCE_MASK(32),
-	.flags	= CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
-/***************************************************************************/
-
-void hw_timer_init(irq_handler_t handler)
-{
-	__raw_writew(MCFTIMER_TMR_DISABLE, TA(MCFTIMER_TMR));
-	mcftmr_cycles_per_jiffy = FREQ / HZ;
-	/*
-	 *	The coldfire timer runs from 0 to TRR included, then 0
-	 *	again and so on.  It counts thus actually TRR + 1 steps
-	 *	for 1 tick, not TRR.  So if you want n cycles,
-	 *	initialize TRR with n - 1.
-	 */
-	__raw_writetrr(mcftmr_cycles_per_jiffy - 1, TA(MCFTIMER_TRR));
-	__raw_writew(MCFTIMER_TMR_ENORI | MCFTIMER_TMR_CLK16 |
-		MCFTIMER_TMR_RESTART | MCFTIMER_TMR_ENABLE, TA(MCFTIMER_TMR));
-
-	clocksource_register_hz(&mcftmr_clk, FREQ);
-
-	timer_interrupt = handler;
-	init_timer_irq();
-	setup_irq(MCF_IRQ_TIMER, &mcftmr_timer_irq);
-
-#ifdef CONFIG_HIGHPROFILE
-	coldfire_profile_init();
-#endif
-}
-
-/***************************************************************************/
-#ifdef CONFIG_HIGHPROFILE
-/***************************************************************************/
-
-/*
- *	By default use timer2 as the profiler clock timer.
- */
-#define	PA(a)	(MCFTIMER_BASE2 + (a))
-
-/*
- *	Choose a reasonably fast profile timer. Make it an odd value to
- *	try and get good coverage of kernel operations.
- */
-#define	PROFILEHZ	1013
-
-/*
- *	Use the other timer to provide high accuracy profiling info.
- */
-irqreturn_t coldfire_profile_tick(int irq, void *dummy)
-{
-	/* Reset ColdFire timer2 */
-	__raw_writeb(MCFTIMER_TER_CAP | MCFTIMER_TER_REF, PA(MCFTIMER_TER));
-	if (current->pid)
-		profile_tick(CPU_PROFILING);
-	return IRQ_HANDLED;
-}
-
-/***************************************************************************/
-
-static struct irqaction coldfire_profile_irq = {
-	.name	 = "profile timer",
-	.flags	 = IRQF_DISABLED | IRQF_TIMER,
-	.handler = coldfire_profile_tick,
-};
-
-void coldfire_profile_init(void)
-{
-	printk(KERN_INFO "PROFILE: lodging TIMER2 @ %dHz as profile timer\n",
-	       PROFILEHZ);
-
-	/* Set up TIMER 2 as high speed profile clock */
-	__raw_writew(MCFTIMER_TMR_DISABLE, PA(MCFTIMER_TMR));
-
-	__raw_writetrr(((MCF_BUSCLK / 16) / PROFILEHZ), PA(MCFTIMER_TRR));
-	__raw_writew(MCFTIMER_TMR_ENORI | MCFTIMER_TMR_CLK16 |
-		MCFTIMER_TMR_RESTART | MCFTIMER_TMR_ENABLE, PA(MCFTIMER_TMR));
-
-	setup_irq(MCF_IRQ_PROFILER, &coldfire_profile_irq);
-}
-
-/***************************************************************************/
-#endif	/* CONFIG_HIGHPROFILE */
-/***************************************************************************/
diff --git a/ANDROID_3.4.5/arch/m68k/platform/coldfire/vectors.c b/ANDROID_3.4.5/arch/m68k/platform/coldfire/vectors.c
deleted file mode 100644
index a4dbdecb..00000000
--- a/ANDROID_3.4.5/arch/m68k/platform/coldfire/vectors.c
+++ /dev/null
@@ -1,70 +0,0 @@
-/***************************************************************************/
-
-/*
- *	linux/arch/m68knommu/platform/coldfire/vectors.c
- *
- *	Copyright (C) 1999-2007, Greg Ungerer <gerg@snapgear.com>
- */
-
-/***************************************************************************/
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <asm/traps.h>
-#include <asm/machdep.h>
-#include <asm/coldfire.h>
-#include <asm/mcfsim.h>
-#include <asm/mcfwdebug.h>
-
-/***************************************************************************/
-
-#ifdef TRAP_DBG_INTERRUPT
-
-asmlinkage void dbginterrupt_c(struct frame *fp)
-{
-	extern void dump(struct pt_regs *fp);
-	printk(KERN_DEBUG "%s(%d): BUS ERROR TRAP\n", __FILE__, __LINE__);
-	dump((struct pt_regs *) fp);
-	asm("halt");
-}
-
-#endif
-
-/***************************************************************************/
-
-/* Assembler routines */
-asmlinkage void buserr(void);
-asmlinkage void trap(void);
-asmlinkage void system_call(void);
-asmlinkage void inthandler(void);
-
-void __init trap_init(void)
-{
-	int i;
-
-	/*
-	 *	There is a common trap handler and common interrupt
-	 *	handler that handle almost every vector. We treat
-	 *	the system call and bus error special, they get their
-	 *	own first level handlers.
-	 */
-	for (i = 3; (i <= 23); i++)
-		_ramvec[i] = trap;
-	for (i = 33; (i <= 63); i++)
-		_ramvec[i] = trap;
-	for (i = 24; (i <= 31); i++)
-		_ramvec[i] = inthandler;
-	for (i = 64; (i < 255); i++)
-		_ramvec[i] = inthandler;
-	_ramvec[255] = 0;
-
-	_ramvec[2] = buserr;
-	_ramvec[32] = system_call;
-
-#ifdef TRAP_DBG_INTERRUPT
-	_ramvec[12] = dbginterrupt;
-#endif
-}
-
-/***************************************************************************/
diff --git a/ANDROID_3.4.5/arch/m68k/q40/Makefile b/ANDROID_3.4.5/arch/m68k/q40/Makefile
deleted file mode 100644
index 27eb4279..00000000
--- a/ANDROID_3.4.5/arch/m68k/q40/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-#
-# Makefile for Linux arch/m68k/q40 source directory
-#
-
-obj-y		:= config.o q40ints.o
diff --git a/ANDROID_3.4.5/arch/m68k/q40/README b/ANDROID_3.4.5/arch/m68k/q40/README
deleted file mode 100644
index 93f4c4cd..00000000
--- a/ANDROID_3.4.5/arch/m68k/q40/README
+++ /dev/null
@@ -1,138 +0,0 @@
-Linux for the Q40
-=================
-
-You may try http://www.geocities.com/SiliconValley/Bay/2602/ for
-some up to date information. Booter and other tools will be also
-available from this place or http://ftp.uni-erlangen.de/pub/unix/Linux/680x0/q40/
-and mirrors.
-
-Hints to documentation usually refer to the linux source tree in
-/usr/src/linux/Documentation unless URL given.
-
-It seems IRQ unmasking can't be safely done on a Q40. IRQ probing
-is not implemented - do not try it! (See below)
-
-For a list of kernel command-line options read the documentation for the
-particular device drivers.
-
-The floppy imposes a very high interrupt load on the CPU, approx 30K/s.
-When something blocks interrupts (HD) it will lose some of them, so far
-this is not known to have caused any data loss. On highly loaded systems
-it can make the floppy very slow or practically stop. Other Q40 OS' simply
-poll the floppy for this reason - something that can't be done in Linux.
-Only possible cure is getting a 82072 controller with fifo instead of
-the 8272A.
-
-drivers used by the Q40, apart from the very obvious (console etc.):
-	drivers/char/q40_keyb.c		# use PC keymaps for national keyboards
-		     serial.c		# normal PC driver - any speed
-	             lp.c		# printer driver
-		     genrtc.c		# RTC
-		char/joystick/*		# most of this should work, not
-				        # in default config.in
-	        block/q40ide.c		# startup for ide
-		      ide*		# see Documentation/ide/ide.txt
-		      floppy.c		# normal PC driver, DMA emu in asm/floppy.h
-					# and arch/m68k/kernel/entry.S
-					# see drivers/block/README.fd
-		net/ne.c
-		video/q40fb.c
-		parport/*
-		sound/dmasound_core.c
-		      dmasound_q40.c
-
-Various other PC drivers can be enabled simply by adding them to
-arch/m68k/config.in, especially 8 bit devices should be without any
-problems. For cards using 16bit io/mem more care is required, like
-checking byte order issues, hacking memcpy_*_io etc.
-
-
-Debugging
-=========
-
-Upon startup the kernel will usually output "ABCQGHIJ" into the SRAM,
-preceded by the booter signature. This is a trace just in case something
-went wrong during earliest setup stages of head.S.
-**Changed** to preserve SRAM contents by default, this is only done when
-requested - SRAM must start with '%LX$' signature to do this. '-d' option
-to 'lxx' loader enables this.
-
-SRAM can also be used as additional console device, use debug=mem.
-This will save kernel startup msgs into SRAM, the screen will display
-only the penguin - and shell prompt if it gets that far..
-Unfortunately only 2000 bytes are available.
-
-Serial console works and can also be used for debugging, see loader_txt
-
-Most problems seem to be caused by fawlty or badly configured io-cards or
-hard drives anyway.
-Make sure to configure the parallel port as SPP and remove IRQ/DMA jumpers
-for first testing. The Q40 does not support DMA and may have trouble with
-parallel ports version of interrupts.
-
-
-Q40 Hardware Description
-========================
-
-This is just an overview, see asm-m68k/* for details ask if you have any
-questions.
-
-The Q40 consists of a 68040@40 MHz, 1MB video RAM, up to 32MB RAM, AT-style
-keyboard interface, 1 Programmable LED, 2x8bit DACs and up to 1MB ROM, 1MB
-shadow ROM.
-The Q60 has any of 68060 or 68LC060 and up to 128 MB RAM.
-
-Most interfacing like floppy, IDE, serial and parallel ports is done via ISA
-slots. The ISA io and mem range is mapped (sparse&byteswapped!) into separate
-regions of the memory.
-The main interrupt register IIRQ_REG will indicate whether an IRQ was internal
-or from some ISA devices, EIRQ_REG can distinguish up to 8 ISA IRQs.
-
-The Q40 custom chip is programmable to provide 2 periodic timers:
-	- 50 or 200 Hz - level 2, !!THIS CAN'T BE DISABLED!!
-	- 10 or 20 KHz - level 4, used for dma-sound
-
-Linux uses the 200 Hz interrupt for timer and beep by default.
-
-
-Interrupts
-==========
-
-q40 master chip handles only a subset of level triggered interrupts.
-
-Linux has some requirements wrt interrupt architecture, these are
-to my knowledge:
-	(a) interrupt handler must not be reentered even when sti() is called
-	    from within handler
-	(b) working enable/disable_irq
-
-Luckily these requirements are only important for drivers shared
-with other architectures - ide,serial,parallel, ethernet.
-q40ints.c now contains a trivial hack for (a), (b) is more difficult
-because only irq's 4-15 can be disabled - and only all of them at once.
-Thus disable_irq() can effectively block the machine if the driver goes
-asleep.
-One thing to keep in mind when hacking around the interrupt code is
-that there is no way to find out which IRQ caused a request, [EI]IRQ_REG
-displays current state of the various IRQ lines.
-
-Keyboard
-========
-
-q40 receives AT make/break codes from the keyboard, these are translated to
-the PC scancodes x86 Linux uses. So by theory every national keyboard should
-work just by loading the appropriate x86 keytable - see any national-HOWTO.
-
-Unfortunately the AT->PC translation isn't quite trivial and even worse, my
-documentation of it is absolutely minimal - thus some exotic keys may not
-behave exactly as expected.
-
-There is still hope that it can be fixed completely though. If you encounter
-problems, email me ideally this:
-	- exact keypress/release sequence
-	- 'showkey -s' run on q40, non-X session
-	- 'showkey -s' run on a PC, non-X session
-	- AT codes as displayed by the q40 debugging ROM
-btw if the showkey output from PC and Q40 doesn't differ then you have some
-classic configuration problem - don't send me anything in this case
-
diff --git a/ANDROID_3.4.5/arch/m68k/q40/config.c b/ANDROID_3.4.5/arch/m68k/q40/config.c
deleted file mode 100644
index 8a1ce327..00000000
--- a/ANDROID_3.4.5/arch/m68k/q40/config.c
+++ /dev/null
@@ -1,346 +0,0 @@
-/*
- *  arch/m68k/q40/config.c
- *
- *  Copyright (C) 1999 Richard Zidlicky
- *
- * originally based on:
- *
- *  linux/bvme/config.c
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file README.legal in the main directory of this archive
- * for more details.
- */
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/tty.h>
-#include <linux/console.h>
-#include <linux/linkage.h>
-#include <linux/init.h>
-#include <linux/major.h>
-#include <linux/serial_reg.h>
-#include <linux/rtc.h>
-#include <linux/vt_kern.h>
-#include <linux/bcd.h>
-#include <linux/platform_device.h>
-
-#include <asm/io.h>
-#include <asm/rtc.h>
-#include <asm/bootinfo.h>
-#include <asm/pgtable.h>
-#include <asm/setup.h>
-#include <asm/irq.h>
-#include <asm/traps.h>
-#include <asm/machdep.h>
-#include <asm/q40_master.h>
-
-extern void q40_init_IRQ(void);
-static void q40_get_model(char *model);
-extern void q40_sched_init(irq_handler_t handler);
-
-static unsigned long q40_gettimeoffset(void);
-static int q40_hwclk(int, struct rtc_time *);
-static unsigned int q40_get_ss(void);
-static int q40_set_clock_mmss(unsigned long);
-static int q40_get_rtc_pll(struct rtc_pll_info *pll);
-static int q40_set_rtc_pll(struct rtc_pll_info *pll);
-
-extern void q40_mksound(unsigned int /*freq*/, unsigned int /*ticks*/);
-
-static void q40_mem_console_write(struct console *co, const char *b,
-				  unsigned int count);
-
-extern int ql_ticks;
-
-static struct console q40_console_driver = {
-	.name	= "debug",
-	.write	= q40_mem_console_write,
-	.flags	= CON_PRINTBUFFER,
-	.index	= -1,
-};
-
-
-/* early debugging function:*/
-extern char *q40_mem_cptr; /*=(char *)0xff020000;*/
-static int _cpleft;
-
-static void q40_mem_console_write(struct console *co, const char *s,
-				  unsigned int count)
-{
-	const char *p = s;
-
-	if (count < _cpleft) {
-		while (count-- > 0) {
-			*q40_mem_cptr = *p++;
-			q40_mem_cptr += 4;
-			_cpleft--;
-		}
-	}
-}
-
-static int __init q40_debug_setup(char *arg)
-{
-	/* useful for early debugging stages - writes kernel messages into SRAM */
-	if (MACH_IS_Q40 && !strncmp(arg, "mem", 3)) {
-		/*printk("using NVRAM debug, q40_mem_cptr=%p\n",q40_mem_cptr);*/
-		_cpleft = 2000 - ((long)q40_mem_cptr-0xff020000) / 4;
-		register_console(&q40_console_driver);
-	}
-	return 0;
-}
-
-early_param("debug", q40_debug_setup);
-
-#if 0
-void printq40(char *str)
-{
-	int l = strlen(str);
-	char *p = q40_mem_cptr;
-
-	while (l-- > 0 && _cpleft-- > 0) {
-		*p = *str++;
-		p += 4;
-	}
-	q40_mem_cptr = p;
-}
-#endif
-
-static int halted;
-
-#ifdef CONFIG_HEARTBEAT
-static void q40_heartbeat(int on)
-{
-	if (halted)
-		return;
-
-	if (on)
-		Q40_LED_ON();
-	else
-		Q40_LED_OFF();
-}
-#endif
-
-static void q40_reset(void)
-{
-        halted = 1;
-        printk("\n\n*******************************************\n"
-		"Called q40_reset : press the RESET button!!\n"
-		"*******************************************\n");
-	Q40_LED_ON();
-	while (1)
-		;
-}
-
-static void q40_halt(void)
-{
-        halted = 1;
-        printk("\n\n*******************\n"
-		   "  Called q40_halt\n"
-		   "*******************\n");
-	Q40_LED_ON();
-	while (1)
-		;
-}
-
-static void q40_get_model(char *model)
-{
-	sprintf(model, "Q40");
-}
-
-static unsigned int serports[] =
-{
-	0x3f8,0x2f8,0x3e8,0x2e8,0
-};
-
-static void q40_disable_irqs(void)
-{
-	unsigned i, j;
-
-	j = 0;
-	while ((i = serports[j++]))
-		outb(0, i + UART_IER);
-	master_outb(0, EXT_ENABLE_REG);
-	master_outb(0, KEY_IRQ_ENABLE_REG);
-}
-
-void __init config_q40(void)
-{
-	mach_sched_init = q40_sched_init;
-
-	mach_init_IRQ = q40_init_IRQ;
-	mach_gettimeoffset = q40_gettimeoffset;
-	mach_hwclk = q40_hwclk;
-	mach_get_ss = q40_get_ss;
-	mach_get_rtc_pll = q40_get_rtc_pll;
-	mach_set_rtc_pll = q40_set_rtc_pll;
-	mach_set_clock_mmss = q40_set_clock_mmss;
-
-	mach_reset = q40_reset;
-	mach_get_model = q40_get_model;
-
-#if defined(CONFIG_INPUT_M68K_BEEP) || defined(CONFIG_INPUT_M68K_BEEP_MODULE)
-	mach_beep = q40_mksound;
-#endif
-#ifdef CONFIG_HEARTBEAT
-	mach_heartbeat = q40_heartbeat;
-#endif
-	mach_halt = q40_halt;
-
-	/* disable a few things that SMSQ might have left enabled */
-	q40_disable_irqs();
-
-	/* no DMA at all, but ide-scsi requires it.. make sure
-	 * all physical RAM fits into the boundary - otherwise
-	 * allocator may play costly and useless tricks */
-	mach_max_dma_address = 1024*1024*1024;
-}
-
-
-int q40_parse_bootinfo(const struct bi_record *rec)
-{
-	return 1;
-}
-
-
-static unsigned long q40_gettimeoffset(void)
-{
-	return 5000 * (ql_ticks != 0);
-}
-
-
-/*
- * Looks like op is non-zero for setting the clock, and zero for
- * reading the clock.
- *
- *  struct hwclk_time {
- *         unsigned        sec;       0..59
- *         unsigned        min;       0..59
- *         unsigned        hour;      0..23
- *         unsigned        day;       1..31
- *         unsigned        mon;       0..11
- *         unsigned        year;      00...
- *         int             wday;      0..6, 0 is Sunday, -1 means unknown/don't set
- * };
- */
-
-static int q40_hwclk(int op, struct rtc_time *t)
-{
-	if (op) {
-		/* Write.... */
-		Q40_RTC_CTRL |= Q40_RTC_WRITE;
-
-		Q40_RTC_SECS = bin2bcd(t->tm_sec);
-		Q40_RTC_MINS = bin2bcd(t->tm_min);
-		Q40_RTC_HOUR = bin2bcd(t->tm_hour);
-		Q40_RTC_DATE = bin2bcd(t->tm_mday);
-		Q40_RTC_MNTH = bin2bcd(t->tm_mon + 1);
-		Q40_RTC_YEAR = bin2bcd(t->tm_year%100);
-		if (t->tm_wday >= 0)
-			Q40_RTC_DOW = bin2bcd(t->tm_wday+1);
-
-		Q40_RTC_CTRL &= ~(Q40_RTC_WRITE);
-	} else {
-		/* Read....  */
-		Q40_RTC_CTRL |= Q40_RTC_READ;
-
-		t->tm_year = bcd2bin (Q40_RTC_YEAR);
-		t->tm_mon  = bcd2bin (Q40_RTC_MNTH)-1;
-		t->tm_mday = bcd2bin (Q40_RTC_DATE);
-		t->tm_hour = bcd2bin (Q40_RTC_HOUR);
-		t->tm_min  = bcd2bin (Q40_RTC_MINS);
-		t->tm_sec  = bcd2bin (Q40_RTC_SECS);
-
-		Q40_RTC_CTRL &= ~(Q40_RTC_READ);
-
-		if (t->tm_year < 70)
-			t->tm_year += 100;
-		t->tm_wday = bcd2bin(Q40_RTC_DOW)-1;
-	}
-
-	return 0;
-}
-
-static unsigned int q40_get_ss(void)
-{
-	return bcd2bin(Q40_RTC_SECS);
-}
-
-/*
- * Set the minutes and seconds from seconds value 'nowtime'.  Fail if
- * clock is out by > 30 minutes.  Logic lifted from atari code.
- */
-
-static int q40_set_clock_mmss(unsigned long nowtime)
-{
-	int retval = 0;
-	short real_seconds = nowtime % 60, real_minutes = (nowtime / 60) % 60;
-
-	int rtc_minutes;
-
-	rtc_minutes = bcd2bin(Q40_RTC_MINS);
-
-	if ((rtc_minutes < real_minutes ?
-	     real_minutes - rtc_minutes :
-	     rtc_minutes - real_minutes) < 30) {
-		Q40_RTC_CTRL |= Q40_RTC_WRITE;
-		Q40_RTC_MINS = bin2bcd(real_minutes);
-		Q40_RTC_SECS = bin2bcd(real_seconds);
-		Q40_RTC_CTRL &= ~(Q40_RTC_WRITE);
-	} else
-		retval = -1;
-
-	return retval;
-}
-
-
-/* get and set PLL calibration of RTC clock */
-#define Q40_RTC_PLL_MASK ((1<<5)-1)
-#define Q40_RTC_PLL_SIGN (1<<5)
-
-static int q40_get_rtc_pll(struct rtc_pll_info *pll)
-{
-	int tmp = Q40_RTC_CTRL;
-
-	pll->pll_value = tmp & Q40_RTC_PLL_MASK;
-	if (tmp & Q40_RTC_PLL_SIGN)
-		pll->pll_value = -pll->pll_value;
-	pll->pll_max = 31;
-	pll->pll_min = -31;
-	pll->pll_posmult = 512;
-	pll->pll_negmult = 256;
-	pll->pll_clock = 125829120;
-
-	return 0;
-}
-
-static int q40_set_rtc_pll(struct rtc_pll_info *pll)
-{
-	if (!pll->pll_ctrl) {
-		/* the docs are a bit unclear so I am doublesetting */
-		/* RTC_WRITE here ... */
-		int tmp = (pll->pll_value & 31) | (pll->pll_value<0 ? 32 : 0) |
-			  Q40_RTC_WRITE;
-		Q40_RTC_CTRL |= Q40_RTC_WRITE;
-		Q40_RTC_CTRL = tmp;
-		Q40_RTC_CTRL &= ~(Q40_RTC_WRITE);
-		return 0;
-	} else
-		return -EINVAL;
-}
-
-static __init int q40_add_kbd_device(void)
-{
-	struct platform_device *pdev;
-
-	if (!MACH_IS_Q40)
-		return -ENODEV;
-
-	pdev = platform_device_register_simple("q40kbd", -1, NULL, 0);
-	if (IS_ERR(pdev))
-		return PTR_ERR(pdev);
-
-	return 0;
-}
-arch_initcall(q40_add_kbd_device);
diff --git a/ANDROID_3.4.5/arch/m68k/q40/q40ints.c b/ANDROID_3.4.5/arch/m68k/q40/q40ints.c
deleted file mode 100644
index 513f9bb1..00000000
--- a/ANDROID_3.4.5/arch/m68k/q40/q40ints.c
+++ /dev/null
@@ -1,326 +0,0 @@
-/*
- * arch/m68k/q40/q40ints.c
- *
- * Copyright (C) 1999,2001 Richard Zidlicky
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file COPYING in the main directory of this archive
- * for more details.
- *
- * .. used to be loosely based on bvme6000ints.c
- *
- */
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-
-#include <asm/ptrace.h>
-#include <asm/traps.h>
-
-#include <asm/q40_master.h>
-#include <asm/q40ints.h>
-
-/*
- * Q40 IRQs are defined as follows:
- *            3,4,5,6,7,10,11,14,15 : ISA dev IRQs
- *            16-31: reserved
- *            32   : keyboard int
- *            33   : frame int (50/200 Hz periodic timer)
- *            34   : sample int (10/20 KHz periodic timer)
- *
-*/
-
-static void q40_irq_handler(unsigned int, struct pt_regs *fp);
-static void q40_irq_enable(struct irq_data *data);
-static void q40_irq_disable(struct irq_data *data);
-
-unsigned short q40_ablecount[35];
-unsigned short q40_state[35];
-
-static unsigned int q40_irq_startup(struct irq_data *data)
-{
-	unsigned int irq = data->irq;
-
-	/* test for ISA ints not implemented by HW */
-	switch (irq) {
-	case 1: case 2: case 8: case 9:
-	case 11: case 12: case 13:
-		printk("%s: ISA IRQ %d not implemented by HW\n", __func__, irq);
-		/* FIXME return -ENXIO; */
-	}
-	return 0;
-}
-
-static void q40_irq_shutdown(struct irq_data *data)
-{
-}
-
-static struct irq_chip q40_irq_chip = {
-	.name		= "q40",
-	.irq_startup	= q40_irq_startup,
-	.irq_shutdown	= q40_irq_shutdown,
-	.irq_enable	= q40_irq_enable,
-	.irq_disable	= q40_irq_disable,
-};
-
-/*
- * void q40_init_IRQ (void)
- *
- * Parameters:	None
- *
- * Returns:	Nothing
- *
- * This function is called during kernel startup to initialize
- * the q40 IRQ handling routines.
- */
-
-static int disabled;
-
-void __init q40_init_IRQ(void)
-{
-	m68k_setup_irq_controller(&q40_irq_chip, handle_simple_irq, 1,
-				  Q40_IRQ_MAX);
-
-	/* setup handler for ISA ints */
-	m68k_setup_auto_interrupt(q40_irq_handler);
-
-	m68k_irq_startup_irq(IRQ_AUTO_2);
-	m68k_irq_startup_irq(IRQ_AUTO_4);
-
-	/* now enable some ints.. */
-	master_outb(1, EXT_ENABLE_REG);  /* ISA IRQ 5-15 */
-
-	/* make sure keyboard IRQ is disabled */
-	master_outb(0, KEY_IRQ_ENABLE_REG);
-}
-
-
-/*
- * this stuff doesn't really belong here..
- */
-
-int ql_ticks;              /* 200Hz ticks since last jiffie */
-static int sound_ticks;
-
-#define SVOL 45
-
-void q40_mksound(unsigned int hz, unsigned int ticks)
-{
-	/* for now ignore hz, except that hz==0 switches off sound */
-	/* simply alternate the ampl (128-SVOL)-(128+SVOL)-..-.. at 200Hz */
-	if (hz == 0) {
-		if (sound_ticks)
-			sound_ticks = 1;
-
-		*DAC_LEFT = 128;
-		*DAC_RIGHT = 128;
-
-		return;
-	}
-	/* sound itself is done in q40_timer_int */
-	if (sound_ticks == 0)
-		sound_ticks = 1000; /* pretty long beep */
-	sound_ticks = ticks << 1;
-}
-
-static irq_handler_t q40_timer_routine;
-
-static irqreturn_t q40_timer_int (int irq, void * dev)
-{
-	ql_ticks = ql_ticks ? 0 : 1;
-	if (sound_ticks) {
-		unsigned char sval=(sound_ticks & 1) ? 128-SVOL : 128+SVOL;
-		sound_ticks--;
-		*DAC_LEFT=sval;
-		*DAC_RIGHT=sval;
-	}
-
-	if (!ql_ticks)
-		q40_timer_routine(irq, dev);
-	return IRQ_HANDLED;
-}
-
-void q40_sched_init (irq_handler_t timer_routine)
-{
-	int timer_irq;
-
-	q40_timer_routine = timer_routine;
-	timer_irq = Q40_IRQ_FRAME;
-
-	if (request_irq(timer_irq, q40_timer_int, 0,
-				"timer", q40_timer_int))
-		panic("Couldn't register timer int");
-
-	master_outb(-1, FRAME_CLEAR_REG);
-	master_outb( 1, FRAME_RATE_REG);
-}
-
-
-/*
- * tables to translate bits into IRQ numbers
- * it is a good idea to order the entries by priority
- *
-*/
-
-struct IRQ_TABLE{ unsigned mask; int irq ;};
-#if 0
-static struct IRQ_TABLE iirqs[]={
-  {Q40_IRQ_FRAME_MASK,Q40_IRQ_FRAME},
-  {Q40_IRQ_KEYB_MASK,Q40_IRQ_KEYBOARD},
-  {0,0}};
-#endif
-static struct IRQ_TABLE eirqs[] = {
-  { .mask = Q40_IRQ3_MASK,	.irq = 3 },	/* ser 1 */
-  { .mask = Q40_IRQ4_MASK,	.irq = 4 },	/* ser 2 */
-  { .mask = Q40_IRQ14_MASK,	.irq = 14 },	/* IDE 1 */
-  { .mask = Q40_IRQ15_MASK,	.irq = 15 },	/* IDE 2 */
-  { .mask = Q40_IRQ6_MASK,	.irq = 6 },	/* floppy, handled elsewhere */
-  { .mask = Q40_IRQ7_MASK,	.irq = 7 },	/* par */
-  { .mask = Q40_IRQ5_MASK,	.irq = 5 },
-  { .mask = Q40_IRQ10_MASK,	.irq = 10 },
-  {0,0}
-};
-
-/* complain only this many times about spurious ints : */
-static int ccleirq=60;    /* ISA dev IRQs*/
-/*static int cclirq=60;*/     /* internal */
-
-/* FIXME: add shared ints,mask,unmask,probing.... */
-
-#define IRQ_INPROGRESS 1
-/*static unsigned short saved_mask;*/
-//static int do_tint=0;
-
-#define DEBUG_Q40INT
-/*#define IP_USE_DISABLE *//* would be nice, but crashes ???? */
-
-static int mext_disabled=0;  /* ext irq disabled by master chip? */
-static int aliased_irq=0;  /* how many times inside handler ?*/
-
-
-/* got interrupt, dispatch to ISA or keyboard/timer IRQs */
-static void q40_irq_handler(unsigned int irq, struct pt_regs *fp)
-{
-	unsigned mir, mer;
-	int i;
-
-//repeat:
-	mir = master_inb(IIRQ_REG);
-#ifdef CONFIG_BLK_DEV_FD
-	if ((mir & Q40_IRQ_EXT_MASK) &&
-	    (master_inb(EIRQ_REG) & Q40_IRQ6_MASK)) {
-		floppy_hardint();
-		return;
-	}
-#endif
-	switch (irq) {
-	case 4:
-	case 6:
-		do_IRQ(Q40_IRQ_SAMPLE, fp);
-		return;
-	}
-	if (mir & Q40_IRQ_FRAME_MASK) {
-		do_IRQ(Q40_IRQ_FRAME, fp);
-		master_outb(-1, FRAME_CLEAR_REG);
-	}
-	if ((mir & Q40_IRQ_SER_MASK) || (mir & Q40_IRQ_EXT_MASK)) {
-		mer = master_inb(EIRQ_REG);
-		for (i = 0; eirqs[i].mask; i++) {
-			if (mer & eirqs[i].mask) {
-				irq = eirqs[i].irq;
-/*
- * There is a little mess wrt which IRQ really caused this irq request. The
- * main problem is that IIRQ_REG and EIRQ_REG reflect the state when they
- * are read - which is long after the request came in. In theory IRQs should
- * not just go away but they occasionally do
- */
-				if (irq > 4 && irq <= 15 && mext_disabled) {
-					/*aliased_irq++;*/
-					goto iirq;
-				}
-				if (q40_state[irq] & IRQ_INPROGRESS) {
-					/* some handlers do local_irq_enable() for irq latency reasons, */
-					/* however reentering an active irq handler is not permitted */
-#ifdef IP_USE_DISABLE
-					/* in theory this is the better way to do it because it still */
-					/* lets through eg the serial irqs, unfortunately it crashes */
-					disable_irq(irq);
-					disabled = 1;
-#else
-					/*printk("IRQ_INPROGRESS detected for irq %d, disabling - %s disabled\n",
-						irq, disabled ? "already" : "not yet"); */
-					fp->sr = (((fp->sr) & (~0x700))+0x200);
-					disabled = 1;
-#endif
-					goto iirq;
-				}
-				q40_state[irq] |= IRQ_INPROGRESS;
-				do_IRQ(irq, fp);
-				q40_state[irq] &= ~IRQ_INPROGRESS;
-
-				/* naively enable everything, if that fails than    */
-				/* this function will be reentered immediately thus */
-				/* getting another chance to disable the IRQ        */
-
-				if (disabled) {
-#ifdef IP_USE_DISABLE
-					if (irq > 4) {
-						disabled = 0;
-						enable_irq(irq);
-					}
-#else
-					disabled = 0;
-					/*printk("reenabling irq %d\n", irq); */
-#endif
-				}
-// used to do 'goto repeat;' here, this delayed bh processing too long
-				return;
-			}
-		}
-		if (mer && ccleirq > 0 && !aliased_irq) {
-			printk("ISA interrupt from unknown source? EIRQ_REG = %x\n",mer);
-			ccleirq--;
-		}
-	}
- iirq:
-	mir = master_inb(IIRQ_REG);
-	/* should test whether keyboard irq is really enabled, doing it in defhand */
-	if (mir & Q40_IRQ_KEYB_MASK)
-		do_IRQ(Q40_IRQ_KEYBOARD, fp);
-
-	return;
-}
-
-void q40_irq_enable(struct irq_data *data)
-{
-	unsigned int irq = data->irq;
-
-	if (irq >= 5 && irq <= 15) {
-		mext_disabled--;
-		if (mext_disabled > 0)
-			printk("q40_irq_enable : nested disable/enable\n");
-		if (mext_disabled == 0)
-			master_outb(1, EXT_ENABLE_REG);
-	}
-}
-
-
-void q40_irq_disable(struct irq_data *data)
-{
-	unsigned int irq = data->irq;
-
-	/* disable ISA iqs : only do something if the driver has been
-	 * verified to be Q40 "compatible" - right now IDE, NE2K
-	 * Any driver should not attempt to sleep across disable_irq !!
-	 */
-
-	if (irq >= 5 && irq <= 15) {
-		master_outb(0, EXT_ENABLE_REG);
-		mext_disabled++;
-		if (mext_disabled > 1)
-			printk("disable_irq nesting count %d\n",mext_disabled);
-	}
-}
diff --git a/ANDROID_3.4.5/arch/m68k/sun3/Makefile b/ANDROID_3.4.5/arch/m68k/sun3/Makefile
deleted file mode 100644
index 38ba0e0c..00000000
--- a/ANDROID_3.4.5/arch/m68k/sun3/Makefile
+++ /dev/null
@@ -1,7 +0,0 @@
-#
-# Makefile for Linux arch/m68k/sun3 source directory
-#
-
-obj-y	:= sun3ints.o sun3dvma.o idprom.o
-
-obj-$(CONFIG_SUN3) += config.o mmu_emu.o leds.o dvma.o intersil.o
diff --git a/ANDROID_3.4.5/arch/m68k/sun3/config.c b/ANDROID_3.4.5/arch/m68k/sun3/config.c
deleted file mode 100644
index 2ca25bd0..00000000
--- a/ANDROID_3.4.5/arch/m68k/sun3/config.c
+++ /dev/null
@@ -1,171 +0,0 @@
-/*
- *  linux/arch/m68k/sun3/config.c
- *
- *  Copyright (C) 1996,1997 Pekka Pietik{inen
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file COPYING in the main directory of this archive
- * for more details.
- */
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/seq_file.h>
-#include <linux/tty.h>
-#include <linux/console.h>
-#include <linux/init.h>
-#include <linux/bootmem.h>
-
-#include <asm/oplib.h>
-#include <asm/setup.h>
-#include <asm/contregs.h>
-#include <asm/movs.h>
-#include <asm/pgtable.h>
-#include <asm/pgalloc.h>
-#include <asm/sun3-head.h>
-#include <asm/sun3mmu.h>
-#include <asm/rtc.h>
-#include <asm/machdep.h>
-#include <asm/idprom.h>
-#include <asm/intersil.h>
-#include <asm/irq.h>
-#include <asm/sections.h>
-#include <asm/segment.h>
-#include <asm/sun3ints.h>
-
-char sun3_reserved_pmeg[SUN3_PMEGS_NUM];
-
-extern unsigned long sun3_gettimeoffset(void);
-static void sun3_sched_init(irq_handler_t handler);
-extern void sun3_get_model (char* model);
-extern int sun3_hwclk(int set, struct rtc_time *t);
-
-volatile char* clock_va;
-extern unsigned long availmem;
-unsigned long num_pages;
-
-static void sun3_get_hardware_list(struct seq_file *m)
-{
-	seq_printf(m, "PROM Revision:\t%s\n", romvec->pv_monid);
-}
-
-void __init sun3_init(void)
-{
-	unsigned char enable_register;
-	int i;
-
-	m68k_machtype= MACH_SUN3;
-	m68k_cputype = CPU_68020;
-	m68k_fputype = FPU_68881; /* mc68881 actually */
-	m68k_mmutype = MMU_SUN3;
-	clock_va    =          (char *) 0xfe06000;	/* dark  */
-	sun3_intreg = (unsigned char *) 0xfe0a000;	/* magic */
-	sun3_disable_interrupts();
-
-	prom_init((void *)LINUX_OPPROM_BEGVM);
-
-	GET_CONTROL_BYTE(AC_SENABLE,enable_register);
-	enable_register |= 0x50; /* Enable FPU */
-	SET_CONTROL_BYTE(AC_SENABLE,enable_register);
-	GET_CONTROL_BYTE(AC_SENABLE,enable_register);
-
-	/* This code looks suspicious, because it doesn't subtract
-           memory belonging to the kernel from the available space */
-
-
-	memset(sun3_reserved_pmeg, 0, sizeof(sun3_reserved_pmeg));
-
-	/* Reserve important PMEGS */
-	/* FIXME: These should be probed instead of hardcoded */
-
-	for (i=0; i<8; i++)		/* Kernel PMEGs */
-		sun3_reserved_pmeg[i] = 1;
-
-	sun3_reserved_pmeg[247] = 1;	/* ROM mapping  */
-	sun3_reserved_pmeg[248] = 1;	/* AMD Ethernet */
-	sun3_reserved_pmeg[251] = 1;	/* VB area      */
-	sun3_reserved_pmeg[254] = 1;	/* main I/O     */
-
-	sun3_reserved_pmeg[249] = 1;
-	sun3_reserved_pmeg[252] = 1;
-	sun3_reserved_pmeg[253] = 1;
-	set_fs(KERNEL_DS);
-}
-
-/* Without this, Bad Things happen when something calls arch_reset. */
-static void sun3_reboot (void)
-{
-	prom_reboot ("vmlinux");
-}
-
-static void sun3_halt (void)
-{
-	prom_halt ();
-}
-
-/* sun3 bootmem allocation */
-
-static void __init sun3_bootmem_alloc(unsigned long memory_start,
-				      unsigned long memory_end)
-{
-	unsigned long start_page;
-
-	/* align start/end to page boundaries */
-	memory_start = ((memory_start + (PAGE_SIZE-1)) & PAGE_MASK);
-	memory_end = memory_end & PAGE_MASK;
-
-	start_page = __pa(memory_start) >> PAGE_SHIFT;
-	num_pages = __pa(memory_end) >> PAGE_SHIFT;
-
-	high_memory = (void *)memory_end;
-	availmem = memory_start;
-
-	m68k_setup_node(0);
-	availmem += init_bootmem_node(NODE_DATA(0), start_page, 0, num_pages);
-	availmem = (availmem + (PAGE_SIZE-1)) & PAGE_MASK;
-
-	free_bootmem(__pa(availmem), memory_end - (availmem));
-}
-
-
-void __init config_sun3(void)
-{
-	unsigned long memory_start, memory_end;
-
-	printk("ARCH: SUN3\n");
-	idprom_init();
-
-	/* Subtract kernel memory from available memory */
-
-        mach_sched_init      =  sun3_sched_init;
-        mach_init_IRQ        =  sun3_init_IRQ;
-        mach_reset           =  sun3_reboot;
-	mach_gettimeoffset   =  sun3_gettimeoffset;
-	mach_get_model	     =  sun3_get_model;
-	mach_hwclk           =  sun3_hwclk;
-	mach_halt	     =  sun3_halt;
-	mach_get_hardware_list = sun3_get_hardware_list;
-
-	memory_start = ((((unsigned long)_end) + 0x2000) & ~0x1fff);
-// PROM seems to want the last couple of physical pages. --m
-	memory_end   = *(romvec->pv_sun3mem) + PAGE_OFFSET - 2*PAGE_SIZE;
-
-	m68k_num_memory=1;
-        m68k_memory[0].size=*(romvec->pv_sun3mem);
-
-	sun3_bootmem_alloc(memory_start, memory_end);
-}
-
-static void __init sun3_sched_init(irq_handler_t timer_routine)
-{
-	sun3_disable_interrupts();
-        intersil_clock->cmd_reg=(INTERSIL_RUN|INTERSIL_INT_DISABLE|INTERSIL_24H_MODE);
-        intersil_clock->int_reg=INTERSIL_HZ_100_MASK;
-	intersil_clear();
-        sun3_enable_irq(5);
-        intersil_clock->cmd_reg=(INTERSIL_RUN|INTERSIL_INT_ENABLE|INTERSIL_24H_MODE);
-        sun3_enable_interrupts();
-        intersil_clear();
-}
-
diff --git a/ANDROID_3.4.5/arch/m68k/sun3/dvma.c b/ANDROID_3.4.5/arch/m68k/sun3/dvma.c
deleted file mode 100644
index d522eaab..00000000
--- a/ANDROID_3.4.5/arch/m68k/sun3/dvma.c
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- * linux/arch/m68k/sun3/dvma.c
- *
- * Written by Sam Creasey
- *
- * Sun3 IOMMU routines used for dvma accesses.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/bootmem.h>
-#include <linux/list.h>
-#include <asm/page.h>
-#include <asm/pgtable.h>
-#include <asm/sun3mmu.h>
-#include <asm/dvma.h>
-
-
-static unsigned long ptelist[120];
-
-static unsigned long dvma_page(unsigned long kaddr, unsigned long vaddr)
-{
-	unsigned long pte;
-	unsigned long j;
-	pte_t ptep;
-
-	j = *(volatile unsigned long *)kaddr;
-	*(volatile unsigned long *)kaddr = j;
-
-	ptep = pfn_pte(virt_to_pfn(kaddr), PAGE_KERNEL);
-	pte = pte_val(ptep);
-//		printk("dvma_remap: addr %lx -> %lx pte %08lx len %x\n",
-//		       kaddr, vaddr, pte, len);
-	if(ptelist[(vaddr & 0xff000) >> PAGE_SHIFT] != pte) {
-		sun3_put_pte(vaddr, pte);
-		ptelist[(vaddr & 0xff000) >> PAGE_SHIFT] = pte;
-	}
-
-	return (vaddr + (kaddr & ~PAGE_MASK));
-
-}
-
-int dvma_map_iommu(unsigned long kaddr, unsigned long baddr,
-			      int len)
-{
-
-	unsigned long end;
-	unsigned long vaddr;
-
-	vaddr = dvma_btov(baddr);
-
-	end = vaddr + len;
-
-	while(vaddr < end) {
-		dvma_page(kaddr, vaddr);
-		kaddr += PAGE_SIZE;
-		vaddr += PAGE_SIZE;
-	}
-
-	return 0;
-
-}
-
-void sun3_dvma_init(void)
-{
-
-	memset(ptelist, 0, sizeof(ptelist));
-
-
-}
diff --git a/ANDROID_3.4.5/arch/m68k/sun3/idprom.c b/ANDROID_3.4.5/arch/m68k/sun3/idprom.c
deleted file mode 100644
index c86ac37d..00000000
--- a/ANDROID_3.4.5/arch/m68k/sun3/idprom.c
+++ /dev/null
@@ -1,132 +0,0 @@
-/*
- * idprom.c: Routines to load the idprom into kernel addresses and
- *           interpret the data contained within.
- *
- * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
- * Sun3/3x models added by David Monro (davidm@psrg.cs.usyd.edu.au)
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/string.h>
-
-#include <asm/oplib.h>
-#include <asm/idprom.h>
-#include <asm/machines.h>  /* Fun with Sun released architectures. */
-
-struct idprom *idprom;
-EXPORT_SYMBOL(idprom);
-
-static struct idprom idprom_buffer;
-
-/* Here is the master table of Sun machines which use some implementation
- * of the Sparc CPU and have a meaningful IDPROM machtype value that we
- * know about.  See asm-sparc/machines.h for empirical constants.
- */
-static struct Sun_Machine_Models Sun_Machines[NUM_SUN_MACHINES] = {
-/* First, Sun3's */
-    { .name = "Sun 3/160 Series",	.id_machtype = (SM_SUN3 | SM_3_160) },
-    { .name = "Sun 3/50",		.id_machtype = (SM_SUN3 | SM_3_50) },
-    { .name = "Sun 3/260 Series",	.id_machtype = (SM_SUN3 | SM_3_260) },
-    { .name = "Sun 3/110 Series",	.id_machtype = (SM_SUN3 | SM_3_110) },
-    { .name = "Sun 3/60",		.id_machtype = (SM_SUN3 | SM_3_60) },
-    { .name = "Sun 3/E",		.id_machtype = (SM_SUN3 | SM_3_E) },
-/* Now, Sun3x's */
-    { .name = "Sun 3/460 Series",	.id_machtype = (SM_SUN3X | SM_3_460) },
-    { .name = "Sun 3/80",		.id_machtype = (SM_SUN3X | SM_3_80) },
-/* Then, Sun4's */
-// { .name = "Sun 4/100 Series",	.id_machtype = (SM_SUN4 | SM_4_110) },
-// { .name = "Sun 4/200 Series",	.id_machtype = (SM_SUN4 | SM_4_260) },
-// { .name = "Sun 4/300 Series",	.id_machtype = (SM_SUN4 | SM_4_330) },
-// { .name = "Sun 4/400 Series",	.id_machtype = (SM_SUN4 | SM_4_470) },
-/* And now, Sun4c's */
-// { .name = "Sun4c SparcStation 1",	.id_machtype = (SM_SUN4C | SM_4C_SS1) },
-// { .name = "Sun4c SparcStation IPC",	.id_machtype = (SM_SUN4C | SM_4C_IPC) },
-// { .name = "Sun4c SparcStation 1+",	.id_machtype = (SM_SUN4C | SM_4C_SS1PLUS) },
-// { .name = "Sun4c SparcStation SLC",	.id_machtype = (SM_SUN4C | SM_4C_SLC) },
-// { .name = "Sun4c SparcStation 2",	.id_machtype = (SM_SUN4C | SM_4C_SS2) },
-// { .name = "Sun4c SparcStation ELC",	.id_machtype = (SM_SUN4C | SM_4C_ELC) },
-// { .name = "Sun4c SparcStation IPX",	.id_machtype = (SM_SUN4C | SM_4C_IPX) },
-/* Finally, early Sun4m's */
-// { .name = "Sun4m SparcSystem600",	.id_machtype = (SM_SUN4M | SM_4M_SS60) },
-// { .name = "Sun4m SparcStation10/20",	.id_machtype = (SM_SUN4M | SM_4M_SS50) },
-// { .name = "Sun4m SparcStation5",	.id_machtype = (SM_SUN4M | SM_4M_SS40) },
-/* One entry for the OBP arch's which are sun4d, sun4e, and newer sun4m's */
-// { .name = "Sun4M OBP based system",	.id_machtype = (SM_SUN4M_OBP | 0x0) }
-};
-
-static void __init display_system_type(unsigned char machtype)
-{
-	register int i;
-
-	for (i = 0; i < NUM_SUN_MACHINES; i++) {
-		if(Sun_Machines[i].id_machtype == machtype) {
-			if (machtype != (SM_SUN4M_OBP | 0x00))
-				printk("TYPE: %s\n", Sun_Machines[i].name);
-			else {
-#if 0
-				prom_getproperty(prom_root_node, "banner-name",
-						 sysname, sizeof(sysname));
-				printk("TYPE: %s\n", sysname);
-#endif
-			}
-			return;
-		}
-	}
-
-	prom_printf("IDPROM: Bogus id_machtype value, 0x%x\n", machtype);
-	prom_halt();
-}
-
-void sun3_get_model(unsigned char* model)
-{
-	register int i;
-
-	for (i = 0; i < NUM_SUN_MACHINES; i++) {
-		if(Sun_Machines[i].id_machtype == idprom->id_machtype) {
-		        strcpy(model, Sun_Machines[i].name);
-			return;
-		}
-	}
-}
-
-
-
-/* Calculate the IDPROM checksum (xor of the data bytes). */
-static unsigned char __init calc_idprom_cksum(struct idprom *idprom)
-{
-	unsigned char cksum, i, *ptr = (unsigned char *)idprom;
-
-	for (i = cksum = 0; i <= 0x0E; i++)
-		cksum ^= *ptr++;
-
-	return cksum;
-}
-
-/* Create a local IDPROM copy, verify integrity, and display information. */
-void __init idprom_init(void)
-{
-	prom_get_idprom((char *) &idprom_buffer, sizeof(idprom_buffer));
-
-	idprom = &idprom_buffer;
-
-	if (idprom->id_format != 0x01)  {
-		prom_printf("IDPROM: Unknown format type!\n");
-		prom_halt();
-	}
-
-	if (idprom->id_cksum != calc_idprom_cksum(idprom)) {
-		prom_printf("IDPROM: Checksum failure (nvram=%x, calc=%x)!\n",
-			    idprom->id_cksum, calc_idprom_cksum(idprom));
-		prom_halt();
-	}
-
-	display_system_type(idprom->id_machtype);
-
-	printk("Ethernet address: %x:%x:%x:%x:%x:%x\n",
-		    idprom->id_ethaddr[0], idprom->id_ethaddr[1],
-		    idprom->id_ethaddr[2], idprom->id_ethaddr[3],
-		    idprom->id_ethaddr[4], idprom->id_ethaddr[5]);
-}
diff --git a/ANDROID_3.4.5/arch/m68k/sun3/intersil.c b/ANDROID_3.4.5/arch/m68k/sun3/intersil.c
deleted file mode 100644
index 94fe8016..00000000
--- a/ANDROID_3.4.5/arch/m68k/sun3/intersil.c
+++ /dev/null
@@ -1,74 +0,0 @@
-/*
- * arch/m68k/sun3/intersil.c
- *
- * basic routines for accessing the intersil clock within the sun3 machines
- *
- * started 11/12/1999 Sam Creasey
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file COPYING in the main directory of this archive
- * for more details.
- */
-
-#include <linux/kernel.h>
-#include <linux/rtc.h>
-
-#include <asm/errno.h>
-#include <asm/rtc.h>
-#include <asm/intersil.h>
-
-
-/* bits to set for start/run of the intersil */
-#define STOP_VAL (INTERSIL_STOP | INTERSIL_INT_ENABLE | INTERSIL_24H_MODE)
-#define START_VAL (INTERSIL_RUN | INTERSIL_INT_ENABLE | INTERSIL_24H_MODE)
-
-/* does this need to be implemented? */
-unsigned long sun3_gettimeoffset(void)
-{
-  return 1;
-}
-
-
-/* get/set hwclock */
-
-int sun3_hwclk(int set, struct rtc_time *t)
-{
-	volatile struct intersil_dt *todintersil;
-	unsigned long flags;
-
-        todintersil = (struct intersil_dt *) &intersil_clock->counter;
-
-	local_irq_save(flags);
-
-	intersil_clock->cmd_reg = STOP_VAL;
-
-	/* set or read the clock */
-	if(set) {
-		todintersil->csec = 0;
-		todintersil->hour = t->tm_hour;
-		todintersil->minute = t->tm_min;
-		todintersil->second = t->tm_sec;
-		todintersil->month = t->tm_mon;
-		todintersil->day = t->tm_mday;
-		todintersil->year = t->tm_year - 68;
-		todintersil->weekday = t->tm_wday;
-	} else {
-		/* read clock */
-		t->tm_sec = todintersil->csec;
-		t->tm_hour = todintersil->hour;
-		t->tm_min = todintersil->minute;
-		t->tm_sec = todintersil->second;
-		t->tm_mon = todintersil->month;
-		t->tm_mday = todintersil->day;
-		t->tm_year = todintersil->year + 68;
-		t->tm_wday = todintersil->weekday;
-	}
-
-	intersil_clock->cmd_reg = START_VAL;
-
-	local_irq_restore(flags);
-
-	return 0;
-
-}
-
diff --git a/ANDROID_3.4.5/arch/m68k/sun3/leds.c b/ANDROID_3.4.5/arch/m68k/sun3/leds.c
deleted file mode 100644
index aad2e0a0..00000000
--- a/ANDROID_3.4.5/arch/m68k/sun3/leds.c
+++ /dev/null
@@ -1,13 +0,0 @@
-#include <asm/contregs.h>
-#include <asm/sun3mmu.h>
-#include <asm/io.h>
-
-void sun3_leds(unsigned char byte)
-{
-	unsigned char dfc;
-
-	GET_DFC(dfc);
-	SET_DFC(FC_CONTROL);
-	SET_CONTROL_BYTE(AC_LEDS, byte);
-	SET_DFC(dfc);
-}
diff --git a/ANDROID_3.4.5/arch/m68k/sun3/mmu_emu.c b/ANDROID_3.4.5/arch/m68k/sun3/mmu_emu.c
deleted file mode 100644
index 8edc510a..00000000
--- a/ANDROID_3.4.5/arch/m68k/sun3/mmu_emu.c
+++ /dev/null
@@ -1,425 +0,0 @@
-/*
-** Tablewalk MMU emulator
-**
-** by Toshiyasu Morita
-**
-** Started 1/16/98 @ 2:22 am
-*/
-
-#include <linux/mman.h>
-#include <linux/mm.h>
-#include <linux/kernel.h>
-#include <linux/ptrace.h>
-#include <linux/delay.h>
-#include <linux/bootmem.h>
-#include <linux/bitops.h>
-#include <linux/module.h>
-
-#include <asm/setup.h>
-#include <asm/traps.h>
-#include <asm/uaccess.h>
-#include <asm/page.h>
-#include <asm/pgtable.h>
-#include <asm/sun3mmu.h>
-#include <asm/segment.h>
-#include <asm/oplib.h>
-#include <asm/mmu_context.h>
-#include <asm/dvma.h>
-
-
-#undef DEBUG_MMU_EMU
-#define DEBUG_PROM_MAPS
-
-/*
-** Defines
-*/
-
-#define CONTEXTS_NUM		8
-#define SEGMAPS_PER_CONTEXT_NUM 2048
-#define PAGES_PER_SEGMENT	16
-#define PMEGS_NUM		256
-#define PMEG_MASK		0xFF
-
-/*
-** Globals
-*/
-
-unsigned long m68k_vmalloc_end;
-EXPORT_SYMBOL(m68k_vmalloc_end);
-
-unsigned long pmeg_vaddr[PMEGS_NUM];
-unsigned char pmeg_alloc[PMEGS_NUM];
-unsigned char pmeg_ctx[PMEGS_NUM];
-
-/* pointers to the mm structs for each task in each
-   context. 0xffffffff is a marker for kernel context */
-static struct mm_struct *ctx_alloc[CONTEXTS_NUM] = {
-    [0] = (struct mm_struct *)0xffffffff
-};
-
-/* has this context been mmdrop'd? */
-static unsigned char ctx_avail = CONTEXTS_NUM-1;
-
-/* array of pages to be marked off for the rom when we do mem_init later */
-/* 256 pages lets the rom take up to 2mb of physical ram..  I really
-   hope it never wants mote than that. */
-unsigned long rom_pages[256];
-
-/* Print a PTE value in symbolic form. For debugging. */
-void print_pte (pte_t pte)
-{
-#if 0
-	/* Verbose version. */
-	unsigned long val = pte_val (pte);
-	printk (" pte=%lx [addr=%lx",
-		val, (val & SUN3_PAGE_PGNUM_MASK) << PAGE_SHIFT);
-	if (val & SUN3_PAGE_VALID)	printk (" valid");
-	if (val & SUN3_PAGE_WRITEABLE)	printk (" write");
-	if (val & SUN3_PAGE_SYSTEM)	printk (" sys");
-	if (val & SUN3_PAGE_NOCACHE)	printk (" nocache");
-	if (val & SUN3_PAGE_ACCESSED)	printk (" accessed");
-	if (val & SUN3_PAGE_MODIFIED)	printk (" modified");
-	switch (val & SUN3_PAGE_TYPE_MASK) {
-		case SUN3_PAGE_TYPE_MEMORY: printk (" memory"); break;
-		case SUN3_PAGE_TYPE_IO:     printk (" io");     break;
-		case SUN3_PAGE_TYPE_VME16:  printk (" vme16");  break;
-		case SUN3_PAGE_TYPE_VME32:  printk (" vme32");  break;
-	}
-	printk ("]\n");
-#else
-	/* Terse version. More likely to fit on a line. */
-	unsigned long val = pte_val (pte);
-	char flags[7], *type;
-
-	flags[0] = (val & SUN3_PAGE_VALID)     ? 'v' : '-';
-	flags[1] = (val & SUN3_PAGE_WRITEABLE) ? 'w' : '-';
-	flags[2] = (val & SUN3_PAGE_SYSTEM)    ? 's' : '-';
-	flags[3] = (val & SUN3_PAGE_NOCACHE)   ? 'x' : '-';
-	flags[4] = (val & SUN3_PAGE_ACCESSED)  ? 'a' : '-';
-	flags[5] = (val & SUN3_PAGE_MODIFIED)  ? 'm' : '-';
-	flags[6] = '\0';
-
-	switch (val & SUN3_PAGE_TYPE_MASK) {
-		case SUN3_PAGE_TYPE_MEMORY: type = "memory"; break;
-		case SUN3_PAGE_TYPE_IO:     type = "io"    ; break;
-		case SUN3_PAGE_TYPE_VME16:  type = "vme16" ; break;
-		case SUN3_PAGE_TYPE_VME32:  type = "vme32" ; break;
-		default: type = "unknown?"; break;
-	}
-
-	printk (" pte=%08lx [%07lx %s %s]\n",
-		val, (val & SUN3_PAGE_PGNUM_MASK) << PAGE_SHIFT, flags, type);
-#endif
-}
-
-/* Print the PTE value for a given virtual address. For debugging. */
-void print_pte_vaddr (unsigned long vaddr)
-{
-	printk (" vaddr=%lx [%02lx]", vaddr, sun3_get_segmap (vaddr));
-	print_pte (__pte (sun3_get_pte (vaddr)));
-}
-
-/*
- * Initialise the MMU emulator.
- */
-void mmu_emu_init(unsigned long bootmem_end)
-{
-	unsigned long seg, num;
-	int i,j;
-
-	memset(rom_pages, 0, sizeof(rom_pages));
-	memset(pmeg_vaddr, 0, sizeof(pmeg_vaddr));
-	memset(pmeg_alloc, 0, sizeof(pmeg_alloc));
-	memset(pmeg_ctx, 0, sizeof(pmeg_ctx));
-
-	/* pmeg align the end of bootmem, adding another pmeg,
-	 * later bootmem allocations will likely need it */
-	bootmem_end = (bootmem_end + (2 * SUN3_PMEG_SIZE)) & ~SUN3_PMEG_MASK;
-
-	/* mark all of the pmegs used thus far as reserved */
-	for (i=0; i < __pa(bootmem_end) / SUN3_PMEG_SIZE ; ++i)
-		pmeg_alloc[i] = 2;
-
-
-	/* I'm thinking that most of the top pmeg's are going to be
-	   used for something, and we probably shouldn't risk it */
-	for(num = 0xf0; num <= 0xff; num++)
-		pmeg_alloc[num] = 2;
-
-	/* liberate all existing mappings in the rest of kernel space */
-	for(seg = bootmem_end; seg < 0x0f800000; seg += SUN3_PMEG_SIZE) {
-		i = sun3_get_segmap(seg);
-
-		if(!pmeg_alloc[i]) {
-#ifdef DEBUG_MMU_EMU
-			printk("freed: ");
-			print_pte_vaddr (seg);
-#endif
-			sun3_put_segmap(seg, SUN3_INVALID_PMEG);
-		}
-	}
-
-	j = 0;
-	for (num=0, seg=0x0F800000; seg<0x10000000; seg+=16*PAGE_SIZE) {
-		if (sun3_get_segmap (seg) != SUN3_INVALID_PMEG) {
-#ifdef DEBUG_PROM_MAPS
-			for(i = 0; i < 16; i++) {
-				printk ("mapped:");
-				print_pte_vaddr (seg + (i*PAGE_SIZE));
-				break;
-			}
-#endif
-			// the lowest mapping here is the end of our
-			// vmalloc region
-			if (!m68k_vmalloc_end)
-				m68k_vmalloc_end = seg;
-
-			// mark the segmap alloc'd, and reserve any
-			// of the first 0xbff pages the hardware is
-			// already using...  does any sun3 support > 24mb?
-			pmeg_alloc[sun3_get_segmap(seg)] = 2;
-		}
-	}
-
-	dvma_init();
-
-
-	/* blank everything below the kernel, and we've got the base
-	   mapping to start all the contexts off with... */
-	for(seg = 0; seg < PAGE_OFFSET; seg += SUN3_PMEG_SIZE)
-		sun3_put_segmap(seg, SUN3_INVALID_PMEG);
-
-	set_fs(MAKE_MM_SEG(3));
-	for(seg = 0; seg < 0x10000000; seg += SUN3_PMEG_SIZE) {
-		i = sun3_get_segmap(seg);
-		for(j = 1; j < CONTEXTS_NUM; j++)
-			(*(romvec->pv_setctxt))(j, (void *)seg, i);
-	}
-	set_fs(KERNEL_DS);
-
-}
-
-/* erase the mappings for a dead context.  Uses the pg_dir for hints
-   as the pmeg tables proved somewhat unreliable, and unmapping all of
-   TASK_SIZE was much slower and no more stable. */
-/* todo: find a better way to keep track of the pmegs used by a
-   context for when they're cleared */
-void clear_context(unsigned long context)
-{
-     unsigned char oldctx;
-     unsigned long i;
-
-     if(context) {
-	     if(!ctx_alloc[context])
-		     panic("clear_context: context not allocated\n");
-
-	     ctx_alloc[context]->context = SUN3_INVALID_CONTEXT;
-	     ctx_alloc[context] = (struct mm_struct *)0;
-	     ctx_avail++;
-     }
-
-     oldctx = sun3_get_context();
-
-     sun3_put_context(context);
-
-     for(i = 0; i < SUN3_INVALID_PMEG; i++) {
-	     if((pmeg_ctx[i] == context) && (pmeg_alloc[i] == 1)) {
-		     sun3_put_segmap(pmeg_vaddr[i], SUN3_INVALID_PMEG);
-		     pmeg_ctx[i] = 0;
-		     pmeg_alloc[i] = 0;
-		     pmeg_vaddr[i] = 0;
-	     }
-     }
-
-     sun3_put_context(oldctx);
-}
-
-/* gets an empty context.  if full, kills the next context listed to
-   die first */
-/* This context invalidation scheme is, well, totally arbitrary, I'm
-   sure it could be much more intelligent...  but it gets the job done
-   for now without much overhead in making it's decision. */
-/* todo: come up with optimized scheme for flushing contexts */
-unsigned long get_free_context(struct mm_struct *mm)
-{
-	unsigned long new = 1;
-	static unsigned char next_to_die = 1;
-
-	if(!ctx_avail) {
-		/* kill someone to get our context */
-		new = next_to_die;
-		clear_context(new);
-		next_to_die = (next_to_die + 1) & 0x7;
-		if(!next_to_die)
-			next_to_die++;
-	} else {
-		while(new < CONTEXTS_NUM) {
-			if(ctx_alloc[new])
-				new++;
-			else
-				break;
-		}
-		// check to make sure one was really free...
-		if(new == CONTEXTS_NUM)
-			panic("get_free_context: failed to find free context");
-	}
-
-	ctx_alloc[new] = mm;
-	ctx_avail--;
-
-	return new;
-}
-
-/*
- * Dynamically select a `spare' PMEG and use it to map virtual `vaddr' in
- * `context'. Maintain internal PMEG management structures. This doesn't
- * actually map the physical address, but does clear the old mappings.
- */
-//todo: better allocation scheme? but is extra complexity worthwhile?
-//todo: only clear old entries if necessary? how to tell?
-
-inline void mmu_emu_map_pmeg (int context, int vaddr)
-{
-	static unsigned char curr_pmeg = 128;
-	int i;
-
-	/* Round address to PMEG boundary. */
-	vaddr &= ~SUN3_PMEG_MASK;
-
-	/* Find a spare one. */
-	while (pmeg_alloc[curr_pmeg] == 2)
-		++curr_pmeg;
-
-
-#ifdef DEBUG_MMU_EMU
-printk("mmu_emu_map_pmeg: pmeg %x to context %d vaddr %x\n",
-       curr_pmeg, context, vaddr);
-#endif
-
-	/* Invalidate old mapping for the pmeg, if any */
-	if (pmeg_alloc[curr_pmeg] == 1) {
-		sun3_put_context(pmeg_ctx[curr_pmeg]);
-		sun3_put_segmap (pmeg_vaddr[curr_pmeg], SUN3_INVALID_PMEG);
-		sun3_put_context(context);
-	}
-
-	/* Update PMEG management structures. */
-	// don't take pmeg's away from the kernel...
-	if(vaddr >= PAGE_OFFSET) {
-		/* map kernel pmegs into all contexts */
-		unsigned char i;
-
-		for(i = 0; i < CONTEXTS_NUM; i++) {
-			sun3_put_context(i);
-			sun3_put_segmap (vaddr, curr_pmeg);
-		}
-		sun3_put_context(context);
-		pmeg_alloc[curr_pmeg] = 2;
-		pmeg_ctx[curr_pmeg] = 0;
-
-	}
-	else {
-		pmeg_alloc[curr_pmeg] = 1;
-		pmeg_ctx[curr_pmeg] = context;
-		sun3_put_segmap (vaddr, curr_pmeg);
-
-	}
-	pmeg_vaddr[curr_pmeg] = vaddr;
-
-	/* Set hardware mapping and clear the old PTE entries. */
-	for (i=0; i<SUN3_PMEG_SIZE; i+=SUN3_PTE_SIZE)
-		sun3_put_pte (vaddr + i, SUN3_PAGE_SYSTEM);
-
-	/* Consider a different one next time. */
-	++curr_pmeg;
-}
-
-/*
- * Handle a pagefault at virtual address `vaddr'; check if there should be a
- * page there (specifically, whether the software pagetables indicate that
- * there is). This is necessary due to the limited size of the second-level
- * Sun3 hardware pagetables (256 groups of 16 pages). If there should be a
- * mapping present, we select a `spare' PMEG and use it to create a mapping.
- * `read_flag' is nonzero for a read fault; zero for a write. Returns nonzero
- * if we successfully handled the fault.
- */
-//todo: should we bump minor pagefault counter? if so, here or in caller?
-//todo: possibly inline this into bus_error030 in <asm/buserror.h> ?
-
-// kernel_fault is set when a kernel page couldn't be demand mapped,
-// and forces another try using the kernel page table.  basically a
-// hack so that vmalloc would work correctly.
-
-int mmu_emu_handle_fault (unsigned long vaddr, int read_flag, int kernel_fault)
-{
-	unsigned long segment, offset;
-	unsigned char context;
-	pte_t *pte;
-	pgd_t * crp;
-
-	if(current->mm == NULL) {
-		crp = swapper_pg_dir;
-		context = 0;
-	} else {
-		context = current->mm->context;
-		if(kernel_fault)
-			crp = swapper_pg_dir;
-		else
-			crp = current->mm->pgd;
-	}
-
-#ifdef DEBUG_MMU_EMU
-	printk ("mmu_emu_handle_fault: vaddr=%lx type=%s crp=%p\n",
-		vaddr, read_flag ? "read" : "write", crp);
-#endif
-
-	segment = (vaddr >> SUN3_PMEG_SIZE_BITS) & 0x7FF;
-	offset  = (vaddr >> SUN3_PTE_SIZE_BITS) & 0xF;
-
-#ifdef DEBUG_MMU_EMU
-	printk ("mmu_emu_handle_fault: segment=%lx offset=%lx\n", segment, offset);
-#endif
-
-	pte = (pte_t *) pgd_val (*(crp + segment));
-
-//todo: next line should check for valid pmd properly.
-	if (!pte) {
-//                printk ("mmu_emu_handle_fault: invalid pmd\n");
-                return 0;
-        }
-
-	pte = (pte_t *) __va ((unsigned long)(pte + offset));
-
-	/* Make sure this is a valid page */
-	if (!(pte_val (*pte) & SUN3_PAGE_VALID))
-		return 0;
-
-	/* Make sure there's a pmeg allocated for the page */
-	if (sun3_get_segmap (vaddr&~SUN3_PMEG_MASK) == SUN3_INVALID_PMEG)
-		mmu_emu_map_pmeg (context, vaddr);
-
-	/* Write the pte value to hardware MMU */
-	sun3_put_pte (vaddr&PAGE_MASK, pte_val (*pte));
-
-	/* Update software copy of the pte value */
-// I'm not sure this is necessary. If this is required, we ought to simply
-// copy this out when we reuse the PMEG or at some other convenient time.
-// Doing it here is fairly meaningless, anyway, as we only know about the
-// first access to a given page. --m
-	if (!read_flag) {
-		if (pte_val (*pte) & SUN3_PAGE_WRITEABLE)
-			pte_val (*pte) |= (SUN3_PAGE_ACCESSED
-					   | SUN3_PAGE_MODIFIED);
-		else
-			return 0;	/* Write-protect error. */
-	} else
-		pte_val (*pte) |= SUN3_PAGE_ACCESSED;
-
-#ifdef DEBUG_MMU_EMU
-	printk ("seg:%d crp:%p ->", get_fs().seg, crp);
-	print_pte_vaddr (vaddr);
-	printk ("\n");
-#endif
-
-	return 1;
-}
diff --git a/ANDROID_3.4.5/arch/m68k/sun3/prom/Makefile b/ANDROID_3.4.5/arch/m68k/sun3/prom/Makefile
deleted file mode 100644
index da7eac06..00000000
--- a/ANDROID_3.4.5/arch/m68k/sun3/prom/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-# Makefile for the Sun Boot PROM interface library under
-# Linux.
-#
-
-obj-y := init.o console.o printf.o  misc.o
-#bootstr.o init.o misc.o segment.o console.o printf.o
diff --git a/ANDROID_3.4.5/arch/m68k/sun3/prom/console.c b/ANDROID_3.4.5/arch/m68k/sun3/prom/console.c
deleted file mode 100644
index e9236437..00000000
--- a/ANDROID_3.4.5/arch/m68k/sun3/prom/console.c
+++ /dev/null
@@ -1,169 +0,0 @@
-/*
- * console.c: Routines that deal with sending and receiving IO
- *            to/from the current console device using the PROM.
- *
- * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
- */
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <asm/openprom.h>
-#include <asm/oplib.h>
-#include <linux/string.h>
-
-/* Non blocking get character from console input device, returns -1
- * if no input was taken.  This can be used for polling.
- */
-int
-prom_nbgetchar(void)
-{
-	int i = -1;
-	unsigned long flags;
-
-	local_irq_save(flags);
-		i = (*(romvec->pv_nbgetchar))();
-	local_irq_restore(flags);
-	return i; /* Ugh, we could spin forever on unsupported proms ;( */
-}
-
-/* Non blocking put character to console device, returns -1 if
- * unsuccessful.
- */
-int
-prom_nbputchar(char c)
-{
-	unsigned long flags;
-	int i = -1;
-
-	local_irq_save(flags);
-		i = (*(romvec->pv_nbputchar))(c);
-	local_irq_restore(flags);
-	return i; /* Ugh, we could spin forever on unsupported proms ;( */
-}
-
-/* Blocking version of get character routine above. */
-char
-prom_getchar(void)
-{
-	int character;
-	while((character = prom_nbgetchar()) == -1) ;
-	return (char) character;
-}
-
-/* Blocking version of put character routine above. */
-void
-prom_putchar(char c)
-{
-	while(prom_nbputchar(c) == -1) ;
-	return;
-}
-
-/* Query for input device type */
-#if 0
-enum prom_input_device
-prom_query_input_device()
-{
-	unsigned long flags;
-	int st_p;
-	char propb[64];
-	char *p;
-
-	switch(prom_vers) {
-	case PROM_V0:
-	case PROM_V2:
-	default:
-		switch(*romvec->pv_stdin) {
-		case PROMDEV_KBD:	return PROMDEV_IKBD;
-		case PROMDEV_TTYA:	return PROMDEV_ITTYA;
-		case PROMDEV_TTYB:	return PROMDEV_ITTYB;
-		default:
-			return PROMDEV_I_UNK;
-		};
-	case PROM_V3:
-	case PROM_P1275:
-		local_irq_save(flags);
-		st_p = (*romvec->pv_v2devops.v2_inst2pkg)(*romvec->pv_v2bootargs.fd_stdin);
-		__asm__ __volatile__("ld [%0], %%g6\n\t" : :
-				     "r" (&current_set[smp_processor_id()]) :
-				     "memory");
-		local_irq_restore(flags);
-		if(prom_node_has_property(st_p, "keyboard"))
-			return PROMDEV_IKBD;
-		prom_getproperty(st_p, "device_type", propb, sizeof(propb));
-		if(strncmp(propb, "serial", sizeof("serial")))
-			return PROMDEV_I_UNK;
-		prom_getproperty(prom_root_node, "stdin-path", propb, sizeof(propb));
-		p = propb;
-		while(*p) p++; p -= 2;
-		if(p[0] == ':') {
-			if(p[1] == 'a')
-				return PROMDEV_ITTYA;
-			else if(p[1] == 'b')
-				return PROMDEV_ITTYB;
-		}
-		return PROMDEV_I_UNK;
-	};
-}
-#endif
-
-/* Query for output device type */
-
-#if 0
-enum prom_output_device
-prom_query_output_device()
-{
-	unsigned long flags;
-	int st_p;
-	char propb[64];
-	char *p;
-	int propl;
-
-	switch(prom_vers) {
-	case PROM_V0:
-		switch(*romvec->pv_stdin) {
-		case PROMDEV_SCREEN:	return PROMDEV_OSCREEN;
-		case PROMDEV_TTYA:	return PROMDEV_OTTYA;
-		case PROMDEV_TTYB:	return PROMDEV_OTTYB;
-		};
-		break;
-	case PROM_V2:
-	case PROM_V3:
-	case PROM_P1275:
-		local_irq_save(flags);
-		st_p = (*romvec->pv_v2devops.v2_inst2pkg)(*romvec->pv_v2bootargs.fd_stdout);
-		__asm__ __volatile__("ld [%0], %%g6\n\t" : :
-				     "r" (&current_set[smp_processor_id()]) :
-				     "memory");
-		local_irq_restore(flags);
-		propl = prom_getproperty(st_p, "device_type", propb, sizeof(propb));
-		if (propl >= 0 && propl == sizeof("display") &&
-			strncmp("display", propb, sizeof("display")) == 0)
-		{
-			return PROMDEV_OSCREEN;
-		}
-		if(prom_vers == PROM_V3) {
-			if(strncmp("serial", propb, sizeof("serial")))
-				return PROMDEV_O_UNK;
-			prom_getproperty(prom_root_node, "stdout-path", propb, sizeof(propb));
-			p = propb;
-			while(*p) p++; p -= 2;
-			if(p[0]==':') {
-				if(p[1] == 'a')
-					return PROMDEV_OTTYA;
-				else if(p[1] == 'b')
-					return PROMDEV_OTTYB;
-			}
-			return PROMDEV_O_UNK;
-		} else {
-			/* This works on SS-2 (an early OpenFirmware) still. */
-			switch(*romvec->pv_stdin) {
-			case PROMDEV_TTYA:	return PROMDEV_OTTYA;
-			case PROMDEV_TTYB:	return PROMDEV_OTTYB;
-			};
-		}
-		break;
-	};
-	return PROMDEV_O_UNK;
-}
-#endif
diff --git a/ANDROID_3.4.5/arch/m68k/sun3/prom/init.c b/ANDROID_3.4.5/arch/m68k/sun3/prom/init.c
deleted file mode 100644
index d8e63493..00000000
--- a/ANDROID_3.4.5/arch/m68k/sun3/prom/init.c
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
- * init.c:  Initialize internal variables used by the PROM
- *          library functions.
- *
- * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-#include <asm/openprom.h>
-#include <asm/oplib.h>
-
-struct linux_romvec *romvec;
-enum prom_major_version prom_vers;
-unsigned int prom_rev, prom_prev;
-
-/* The root node of the prom device tree. */
-int prom_root_node;
-
-/* Pointer to the device tree operations structure. */
-struct linux_nodeops *prom_nodeops;
-
-/* You must call prom_init() before you attempt to use any of the
- * routines in the prom library.  It returns 0 on success, 1 on
- * failure.  It gets passed the pointer to the PROM vector.
- */
-
-extern void prom_meminit(void);
-extern void prom_ranges_init(void);
-
-void __init prom_init(struct linux_romvec *rp)
-{
-	romvec = rp;
-#ifndef CONFIG_SUN3
-	switch(romvec->pv_romvers) {
-	case 0:
-		prom_vers = PROM_V0;
-		break;
-	case 2:
-		prom_vers = PROM_V2;
-		break;
-	case 3:
-		prom_vers = PROM_V3;
-		break;
-	case 4:
-		prom_vers = PROM_P1275;
-		prom_printf("PROMLIB: Sun IEEE Prom not supported yet\n");
-		prom_halt();
-		break;
-	default:
-		prom_printf("PROMLIB: Bad PROM version %d\n",
-			    romvec->pv_romvers);
-		prom_halt();
-		break;
-	};
-
-	prom_rev = romvec->pv_plugin_revision;
-	prom_prev = romvec->pv_printrev;
-	prom_nodeops = romvec->pv_nodeops;
-
-	prom_root_node = prom_getsibling(0);
-	if((prom_root_node == 0) || (prom_root_node == -1))
-		prom_halt();
-
-	if((((unsigned long) prom_nodeops) == 0) ||
-	   (((unsigned long) prom_nodeops) == -1))
-		prom_halt();
-
-	prom_meminit();
-
-	prom_ranges_init();
-#endif
-//	printk("PROMLIB: Sun Boot Prom Version %d Revision %d\n",
-//	       romvec->pv_romvers, prom_rev);
-
-	/* Initialization successful. */
-	return;
-}
diff --git a/ANDROID_3.4.5/arch/m68k/sun3/prom/misc.c b/ANDROID_3.4.5/arch/m68k/sun3/prom/misc.c
deleted file mode 100644
index 3d60e133..00000000
--- a/ANDROID_3.4.5/arch/m68k/sun3/prom/misc.c
+++ /dev/null
@@ -1,94 +0,0 @@
-/*
- * misc.c:  Miscellaneous prom functions that don't belong
- *          anywhere else.
- *
- * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
- */
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <asm/sun3-head.h>
-#include <asm/idprom.h>
-#include <asm/openprom.h>
-#include <asm/oplib.h>
-#include <asm/movs.h>
-
-/* Reset and reboot the machine with the command 'bcommand'. */
-void
-prom_reboot(char *bcommand)
-{
-	unsigned long flags;
-	local_irq_save(flags);
-	(*(romvec->pv_reboot))(bcommand);
-	local_irq_restore(flags);
-}
-
-/* Drop into the prom, with the chance to continue with the 'go'
- * prom command.
- */
-void
-prom_cmdline(void)
-{
-}
-
-/* Drop into the prom, but completely terminate the program.
- * No chance of continuing.
- */
-void
-prom_halt(void)
-{
-	unsigned long flags;
-again:
-	local_irq_save(flags);
-	(*(romvec->pv_halt))();
-	local_irq_restore(flags);
-	goto again; /* PROM is out to get me -DaveM */
-}
-
-typedef void (*sfunc_t)(void);
-
-/* Get the idprom and stuff it into buffer 'idbuf'.  Returns the
- * format type.  'num_bytes' is the number of bytes that your idbuf
- * has space for.  Returns 0xff on error.
- */
-unsigned char
-prom_get_idprom(char *idbuf, int num_bytes)
-{
-	int i, oldsfc;
-	GET_SFC(oldsfc);
-	SET_SFC(FC_CONTROL);
-	for(i=0;i<num_bytes; i++)
-	{
-		/* There is a problem with the GET_CONTROL_BYTE
-		macro; defining the extra variable
-		gets around it.
-		*/
-		int c;
-		GET_CONTROL_BYTE(SUN3_IDPROM_BASE + i, c);
-		idbuf[i] = c;
-	}
-	SET_SFC(oldsfc);
-	return idbuf[0];
-}
-
-/* Get the major prom version number. */
-int
-prom_version(void)
-{
-	return romvec->pv_romvers;
-}
-
-/* Get the prom plugin-revision. */
-int
-prom_getrev(void)
-{
-	return prom_rev;
-}
-
-/* Get the prom firmware print revision. */
-int
-prom_getprev(void)
-{
-	return prom_prev;
-}
diff --git a/ANDROID_3.4.5/arch/m68k/sun3/prom/printf.c b/ANDROID_3.4.5/arch/m68k/sun3/prom/printf.c
deleted file mode 100644
index df85018f..00000000
--- a/ANDROID_3.4.5/arch/m68k/sun3/prom/printf.c
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * printf.c:  Internal prom library printf facility.
- *
- * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
- */
-
-/* This routine is internal to the prom library, no one else should know
- * about or use it!  It's simple and smelly anyway....
- */
-
-#include <linux/kernel.h>
-
-#include <asm/openprom.h>
-#include <asm/oplib.h>
-
-#ifdef CONFIG_KGDB
-extern int kgdb_initialized;
-#endif
-
-static char ppbuf[1024];
-
-void
-prom_printf(char *fmt, ...)
-{
-	va_list args;
-	char ch, *bptr;
-	int i;
-
-	va_start(args, fmt);
-
-#ifdef CONFIG_KGDB
-	ppbuf[0] = 'O';
-	i = vsprintf(ppbuf + 1, fmt, args) + 1;
-#else
-	i = vsprintf(ppbuf, fmt, args);
-#endif
-
-	bptr = ppbuf;
-
-#ifdef CONFIG_KGDB
-	if (kgdb_initialized) {
-		printk("kgdb_initialized = %d\n", kgdb_initialized);
-		putpacket(bptr, 1);
-	} else
-#else
-	while((ch = *(bptr++)) != 0) {
-		if(ch == '\n')
-			prom_putchar('\r');
-
-		prom_putchar(ch);
-	}
-#endif
-	va_end(args);
-	return;
-}
diff --git a/ANDROID_3.4.5/arch/m68k/sun3/sun3dvma.c b/ANDROID_3.4.5/arch/m68k/sun3/sun3dvma.c
deleted file mode 100644
index ca0966ca..00000000
--- a/ANDROID_3.4.5/arch/m68k/sun3/sun3dvma.c
+++ /dev/null
@@ -1,381 +0,0 @@
-/*
- * linux/arch/m68k/sun3/sun3dvma.c
- *
- * Copyright (C) 2000 Sam Creasey
- *
- * Contains common routines for sun3/sun3x DVMA management.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/gfp.h>
-#include <linux/mm.h>
-#include <linux/list.h>
-
-#include <asm/page.h>
-#include <asm/pgtable.h>
-#include <asm/dvma.h>
-
-#undef DVMA_DEBUG
-
-#ifdef CONFIG_SUN3X
-extern void dvma_unmap_iommu(unsigned long baddr, int len);
-#else
-static inline void dvma_unmap_iommu(unsigned long a, int b)
-{
-}
-#endif
-
-#ifdef CONFIG_SUN3
-extern void sun3_dvma_init(void);
-#endif
-
-static unsigned long iommu_use[IOMMU_TOTAL_ENTRIES];
-
-#define dvma_index(baddr) ((baddr - DVMA_START) >> DVMA_PAGE_SHIFT)
-
-#define dvma_entry_use(baddr)		(iommu_use[dvma_index(baddr)])
-
-struct hole {
-	unsigned long start;
-	unsigned long end;
-	unsigned long size;
-	struct list_head list;
-};
-
-static struct list_head hole_list;
-static struct list_head hole_cache;
-static struct hole initholes[64];
-
-#ifdef DVMA_DEBUG
-
-static unsigned long dvma_allocs;
-static unsigned long dvma_frees;
-static unsigned long long dvma_alloc_bytes;
-static unsigned long long dvma_free_bytes;
-
-static void print_use(void)
-{
-
-	int i;
-	int j = 0;
-
-	printk("dvma entry usage:\n");
-
-	for(i = 0; i < IOMMU_TOTAL_ENTRIES; i++) {
-		if(!iommu_use[i])
-			continue;
-
-		j++;
-
-		printk("dvma entry: %08lx len %08lx\n",
-		       ( i << DVMA_PAGE_SHIFT) + DVMA_START,
-		       iommu_use[i]);
-	}
-
-	printk("%d entries in use total\n", j);
-
-	printk("allocation/free calls: %lu/%lu\n", dvma_allocs, dvma_frees);
-	printk("allocation/free bytes: %Lx/%Lx\n", dvma_alloc_bytes,
-	       dvma_free_bytes);
-}
-
-static void print_holes(struct list_head *holes)
-{
-
-	struct list_head *cur;
-	struct hole *hole;
-
-	printk("listing dvma holes\n");
-	list_for_each(cur, holes) {
-		hole = list_entry(cur, struct hole, list);
-
-		if((hole->start == 0) && (hole->end == 0) && (hole->size == 0))
-			continue;
-
-		printk("hole: start %08lx end %08lx size %08lx\n", hole->start, hole->end, hole->size);
-	}
-
-	printk("end of hole listing...\n");
-
-}
-#endif /* DVMA_DEBUG */
-
-static inline int refill(void)
-{
-
-	struct hole *hole;
-	struct hole *prev = NULL;
-	struct list_head *cur;
-	int ret = 0;
-
-	list_for_each(cur, &hole_list) {
-		hole = list_entry(cur, struct hole, list);
-
-		if(!prev) {
-			prev = hole;
-			continue;
-		}
-
-		if(hole->end == prev->start) {
-			hole->size += prev->size;
-			hole->end = prev->end;
-			list_move(&(prev->list), &hole_cache);
-			ret++;
-		}
-
-	}
-
-	return ret;
-}
-
-static inline struct hole *rmcache(void)
-{
-	struct hole *ret;
-
-	if(list_empty(&hole_cache)) {
-		if(!refill()) {
-			printk("out of dvma hole cache!\n");
-			BUG();
-		}
-	}
-
-	ret = list_entry(hole_cache.next, struct hole, list);
-	list_del(&(ret->list));
-
-	return ret;
-
-}
-
-static inline unsigned long get_baddr(int len, unsigned long align)
-{
-
-	struct list_head *cur;
-	struct hole *hole;
-
-	if(list_empty(&hole_list)) {
-#ifdef DVMA_DEBUG
-		printk("out of dvma holes! (printing hole cache)\n");
-		print_holes(&hole_cache);
-		print_use();
-#endif
-		BUG();
-	}
-
-	list_for_each(cur, &hole_list) {
-		unsigned long newlen;
-
-		hole = list_entry(cur, struct hole, list);
-
-		if(align > DVMA_PAGE_SIZE)
-			newlen = len + ((hole->end - len) & (align-1));
-		else
-			newlen = len;
-
-		if(hole->size > newlen) {
-			hole->end -= newlen;
-			hole->size -= newlen;
-			dvma_entry_use(hole->end) = newlen;
-#ifdef DVMA_DEBUG
-			dvma_allocs++;
-			dvma_alloc_bytes += newlen;
-#endif
-			return hole->end;
-		} else if(hole->size == newlen) {
-			list_move(&(hole->list), &hole_cache);
-			dvma_entry_use(hole->start) = newlen;
-#ifdef DVMA_DEBUG
-			dvma_allocs++;
-			dvma_alloc_bytes += newlen;
-#endif
-			return hole->start;
-		}
-
-	}
-
-	printk("unable to find dvma hole!\n");
-	BUG();
-	return 0;
-}
-
-static inline int free_baddr(unsigned long baddr)
-{
-
-	unsigned long len;
-	struct hole *hole;
-	struct list_head *cur;
-	unsigned long orig_baddr;
-
-	orig_baddr = baddr;
-	len = dvma_entry_use(baddr);
-	dvma_entry_use(baddr) = 0;
-	baddr &= DVMA_PAGE_MASK;
-	dvma_unmap_iommu(baddr, len);
-
-#ifdef DVMA_DEBUG
-	dvma_frees++;
-	dvma_free_bytes += len;
-#endif
-
-	list_for_each(cur, &hole_list) {
-		hole = list_entry(cur, struct hole, list);
-
-		if(hole->end == baddr) {
-			hole->end += len;
-			hole->size += len;
-			return 0;
-		} else if(hole->start == (baddr + len)) {
-			hole->start = baddr;
-			hole->size += len;
-			return 0;
-		}
-
-	}
-
-	hole = rmcache();
-
-	hole->start = baddr;
-	hole->end = baddr + len;
-	hole->size = len;
-
-//	list_add_tail(&(hole->list), cur);
-	list_add(&(hole->list), cur);
-
-	return 0;
-
-}
-
-void dvma_init(void)
-{
-
-	struct hole *hole;
-	int i;
-
-	INIT_LIST_HEAD(&hole_list);
-	INIT_LIST_HEAD(&hole_cache);
-
-	/* prepare the hole cache */
-	for(i = 0; i < 64; i++)
-		list_add(&(initholes[i].list), &hole_cache);
-
-	hole = rmcache();
-	hole->start = DVMA_START;
-	hole->end = DVMA_END;
-	hole->size = DVMA_SIZE;
-
-	list_add(&(hole->list), &hole_list);
-
-	memset(iommu_use, 0, sizeof(iommu_use));
-
-	dvma_unmap_iommu(DVMA_START, DVMA_SIZE);
-
-#ifdef CONFIG_SUN3
-	sun3_dvma_init();
-#endif
-
-}
-
-inline unsigned long dvma_map_align(unsigned long kaddr, int len, int align)
-{
-
-	unsigned long baddr;
-	unsigned long off;
-
-	if(!len)
-		len = 0x800;
-
-	if(!kaddr || !len) {
-//		printk("error: kaddr %lx len %x\n", kaddr, len);
-//		*(int *)4 = 0;
-		return 0;
-	}
-
-#ifdef DEBUG
-	printk("dvma_map request %08lx bytes from %08lx\n",
-	       len, kaddr);
-#endif
-	off = kaddr & ~DVMA_PAGE_MASK;
-	kaddr &= PAGE_MASK;
-	len += off;
-	len = ((len + (DVMA_PAGE_SIZE-1)) & DVMA_PAGE_MASK);
-
-	if(align == 0)
-		align = DVMA_PAGE_SIZE;
-	else
-		align = ((align + (DVMA_PAGE_SIZE-1)) & DVMA_PAGE_MASK);
-
-	baddr = get_baddr(len, align);
-//	printk("using baddr %lx\n", baddr);
-
-	if(!dvma_map_iommu(kaddr, baddr, len))
-		return (baddr + off);
-
-	printk("dvma_map failed kaddr %lx baddr %lx len %x\n", kaddr, baddr, len);
-	BUG();
-	return 0;
-}
-EXPORT_SYMBOL(dvma_map_align);
-
-void dvma_unmap(void *baddr)
-{
-	unsigned long addr;
-
-	addr = (unsigned long)baddr;
-	/* check if this is a vme mapping */
-	if(!(addr & 0x00f00000))
-		addr |= 0xf00000;
-
-	free_baddr(addr);
-
-	return;
-
-}
-EXPORT_SYMBOL(dvma_unmap);
-
-void *dvma_malloc_align(unsigned long len, unsigned long align)
-{
-	unsigned long kaddr;
-	unsigned long baddr;
-	unsigned long vaddr;
-
-	if(!len)
-		return NULL;
-
-#ifdef DEBUG
-	printk("dvma_malloc request %lx bytes\n", len);
-#endif
-	len = ((len + (DVMA_PAGE_SIZE-1)) & DVMA_PAGE_MASK);
-
-        if((kaddr = __get_free_pages(GFP_ATOMIC, get_order(len))) == 0)
-		return NULL;
-
-	if((baddr = (unsigned long)dvma_map_align(kaddr, len, align)) == 0) {
-		free_pages(kaddr, get_order(len));
-		return NULL;
-	}
-
-	vaddr = dvma_btov(baddr);
-
-	if(dvma_map_cpu(kaddr, vaddr, len) < 0) {
-		dvma_unmap((void *)baddr);
-		free_pages(kaddr, get_order(len));
-		return NULL;
-	}
-
-#ifdef DEBUG
-	printk("mapped %08lx bytes %08lx kern -> %08lx bus\n",
-	       len, kaddr, baddr);
-#endif
-
-	return (void *)vaddr;
-
-}
-EXPORT_SYMBOL(dvma_malloc_align);
-
-void dvma_free(void *vaddr)
-{
-
-	return;
-
-}
-EXPORT_SYMBOL(dvma_free);
diff --git a/ANDROID_3.4.5/arch/m68k/sun3/sun3ints.c b/ANDROID_3.4.5/arch/m68k/sun3/sun3ints.c
deleted file mode 100644
index 78b60f53..00000000
--- a/ANDROID_3.4.5/arch/m68k/sun3/sun3ints.c
+++ /dev/null
@@ -1,120 +0,0 @@
- /*
- * linux/arch/m68k/sun3/sun3ints.c -- Sun-3(x) Linux interrupt handling code
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file COPYING in the main directory of this archive
- * for more details.
- */
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/kernel_stat.h>
-#include <linux/interrupt.h>
-#include <asm/segment.h>
-#include <asm/intersil.h>
-#include <asm/oplib.h>
-#include <asm/sun3ints.h>
-#include <asm/irq_regs.h>
-#include <linux/seq_file.h>
-
-extern void sun3_leds (unsigned char);
-
-void sun3_disable_interrupts(void)
-{
-	sun3_disable_irq(0);
-}
-
-void sun3_enable_interrupts(void)
-{
-	sun3_enable_irq(0);
-}
-
-static int led_pattern[8] = {
-       ~(0x80), ~(0x01),
-       ~(0x40), ~(0x02),
-       ~(0x20), ~(0x04),
-       ~(0x10), ~(0x08)
-};
-
-volatile unsigned char* sun3_intreg;
-
-void sun3_enable_irq(unsigned int irq)
-{
-	*sun3_intreg |=  (1 << irq);
-}
-
-void sun3_disable_irq(unsigned int irq)
-{
-	*sun3_intreg &= ~(1 << irq);
-}
-
-static irqreturn_t sun3_int7(int irq, void *dev_id)
-{
-	unsigned int cnt;
-
-	cnt = kstat_irqs_cpu(irq, 0);
-	if (!(cnt % 2000))
-		sun3_leds(led_pattern[cnt % 16000 / 2000]);
-	return IRQ_HANDLED;
-}
-
-static irqreturn_t sun3_int5(int irq, void *dev_id)
-{
-	unsigned int cnt;
-
-#ifdef CONFIG_SUN3
-	intersil_clear();
-#endif
-#ifdef CONFIG_SUN3
-	intersil_clear();
-#endif
-	xtime_update(1);
-	update_process_times(user_mode(get_irq_regs()));
-	cnt = kstat_irqs_cpu(irq, 0);
-	if (!(cnt % 20))
-		sun3_leds(led_pattern[cnt % 160 / 20]);
-	return IRQ_HANDLED;
-}
-
-static irqreturn_t sun3_vec255(int irq, void *dev_id)
-{
-//	intersil_clear();
-	return IRQ_HANDLED;
-}
-
-static void sun3_irq_enable(struct irq_data *data)
-{
-    sun3_enable_irq(data->irq);
-};
-
-static void sun3_irq_disable(struct irq_data *data)
-{
-    sun3_disable_irq(data->irq);
-};
-
-static struct irq_chip sun3_irq_chip = {
-	.name		= "sun3",
-	.irq_startup	= m68k_irq_startup,
-	.irq_shutdown	= m68k_irq_shutdown,
-	.irq_enable	= sun3_irq_enable,
-	.irq_disable	= sun3_irq_disable,
-	.irq_mask	= sun3_irq_disable,
-	.irq_unmask	= sun3_irq_enable,
-};
-
-void __init sun3_init_IRQ(void)
-{
-	*sun3_intreg = 1;
-
-	m68k_setup_irq_controller(&sun3_irq_chip, handle_level_irq, IRQ_AUTO_1,
-				  7);
-	m68k_setup_user_interrupt(VEC_USER, 128);
-
-	if (request_irq(IRQ_AUTO_5, sun3_int5, 0, "int5", NULL))
-		pr_err("Couldn't register %s interrupt\n", "int5");
-	if (request_irq(IRQ_AUTO_7, sun3_int7, 0, "int7", NULL))
-		pr_err("Couldn't register %s interrupt\n", "int7");
-	if (request_irq(IRQ_USER+127, sun3_vec255, 0, "vec255", NULL))
-		pr_err("Couldn't register %s interrupt\n", "vec255");
-}
diff --git a/ANDROID_3.4.5/arch/m68k/sun3x/Makefile b/ANDROID_3.4.5/arch/m68k/sun3x/Makefile
deleted file mode 100644
index be5776d9..00000000
--- a/ANDROID_3.4.5/arch/m68k/sun3x/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-#
-# Makefile for Linux arch/m68k/sun3x source directory
-#
-
-obj-y		:= config.o time.o dvma.o prom.o
diff --git a/ANDROID_3.4.5/arch/m68k/sun3x/config.c b/ANDROID_3.4.5/arch/m68k/sun3x/config.c
deleted file mode 100644
index dd306c84..00000000
--- a/ANDROID_3.4.5/arch/m68k/sun3x/config.c
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
- * Setup kernel for a Sun3x machine
- *
- * (C) 1999 Thomas Bogendoerfer (tsbogend@alpha.franken.de)
- *
- * based on code from Oliver Jowett <oliver@jowett.manawatu.gen.nz>
- */
-
-#include <linux/types.h>
-#include <linux/mm.h>
-#include <linux/seq_file.h>
-#include <linux/console.h>
-#include <linux/init.h>
-
-#include <asm/machdep.h>
-#include <asm/irq.h>
-#include <asm/sun3xprom.h>
-#include <asm/sun3ints.h>
-#include <asm/setup.h>
-#include <asm/oplib.h>
-
-#include "time.h"
-
-volatile char *clock_va;
-
-extern void sun3_get_model(char *model);
-
-void sun3_leds(unsigned int i)
-{
-
-}
-
-static void sun3x_get_hardware_list(struct seq_file *m)
-{
-	seq_printf(m, "PROM Revision:\t%s\n", romvec->pv_monid);
-}
-
-/*
- *  Setup the sun3x configuration info
- */
-void __init config_sun3x(void)
-{
-
-	sun3x_prom_init();
-
-	mach_max_dma_address = 0xffffffff; /* we can DMA anywhere, whee */
-
-	mach_sched_init      = sun3x_sched_init;
-	mach_init_IRQ        = sun3_init_IRQ;
-
-	mach_gettimeoffset   = sun3x_gettimeoffset;
-	mach_reset           = sun3x_reboot;
-
-	mach_hwclk           = sun3x_hwclk;
-	mach_get_model       = sun3_get_model;
-	mach_get_hardware_list = sun3x_get_hardware_list;
-
-	sun3_intreg = (unsigned char *)SUN3X_INTREG;
-
-	/* only the serial console is known to work anyway... */
-#if 0
-	switch (*(unsigned char *)SUN3X_EEPROM_CONS) {
-	case 0x10:
-		serial_console = 1;
-		conswitchp = NULL;
-		break;
-	case 0x11:
-		serial_console = 2;
-		conswitchp = NULL;
-		break;
-	default:
-		serial_console = 0;
-		conswitchp = &dummy_con;
-		break;
-	}
-#endif
-
-}
-
diff --git a/ANDROID_3.4.5/arch/m68k/sun3x/dvma.c b/ANDROID_3.4.5/arch/m68k/sun3x/dvma.c
deleted file mode 100644
index d5ddcdaa..00000000
--- a/ANDROID_3.4.5/arch/m68k/sun3x/dvma.c
+++ /dev/null
@@ -1,207 +0,0 @@
-/*
- * Virtual DMA allocation
- *
- * (C) 1999 Thomas Bogendoerfer (tsbogend@alpha.franken.de)
- *
- * 11/26/2000 -- disabled the existing code because it didn't work for
- * me in 2.4.  Replaced with a significantly more primitive version
- * similar to the sun3 code.  the old functionality was probably more
- * desirable, but....   -- Sam Creasey (sammy@oh.verio.com)
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/bitops.h>
-#include <linux/mm.h>
-#include <linux/bootmem.h>
-#include <linux/vmalloc.h>
-
-#include <asm/sun3x.h>
-#include <asm/dvma.h>
-#include <asm/io.h>
-#include <asm/page.h>
-#include <asm/pgtable.h>
-#include <asm/pgalloc.h>
-
-/* IOMMU support */
-
-#define IOMMU_ADDR_MASK            0x03ffe000
-#define IOMMU_CACHE_INHIBIT        0x00000040
-#define IOMMU_FULL_BLOCK           0x00000020
-#define IOMMU_MODIFIED             0x00000010
-#define IOMMU_USED                 0x00000008
-#define IOMMU_WRITE_PROTECT        0x00000004
-#define IOMMU_DT_MASK              0x00000003
-#define IOMMU_DT_INVALID           0x00000000
-#define IOMMU_DT_VALID             0x00000001
-#define IOMMU_DT_BAD               0x00000002
-
-
-static volatile unsigned long *iommu_pte = (unsigned long *)SUN3X_IOMMU;
-
-
-#define dvma_entry_paddr(index)		(iommu_pte[index] & IOMMU_ADDR_MASK)
-#define dvma_entry_vaddr(index,paddr)	((index << DVMA_PAGE_SHIFT) |  \
-					 (paddr & (DVMA_PAGE_SIZE-1)))
-#if 0
-#define dvma_entry_set(index,addr)	(iommu_pte[index] =            \
-					    (addr & IOMMU_ADDR_MASK) | \
-				             IOMMU_DT_VALID | IOMMU_CACHE_INHIBIT)
-#else
-#define dvma_entry_set(index,addr)	(iommu_pte[index] =            \
-					    (addr & IOMMU_ADDR_MASK) | \
-				             IOMMU_DT_VALID)
-#endif
-#define dvma_entry_clr(index)		(iommu_pte[index] = IOMMU_DT_INVALID)
-#define dvma_entry_hash(addr)		((addr >> DVMA_PAGE_SHIFT) ^ \
-					 ((addr & 0x03c00000) >>     \
-						(DVMA_PAGE_SHIFT+4)))
-
-#undef DEBUG
-
-#ifdef DEBUG
-/* code to print out a dvma mapping for debugging purposes */
-void dvma_print (unsigned long dvma_addr)
-{
-
-        unsigned long index;
-
-        index = dvma_addr >> DVMA_PAGE_SHIFT;
-
-        printk("idx %lx dvma_addr %08lx paddr %08lx\n", index, dvma_addr,
-               dvma_entry_paddr(index));
-
-
-}
-#endif
-
-
-/* create a virtual mapping for a page assigned within the IOMMU
-   so that the cpu can reach it easily */
-inline int dvma_map_cpu(unsigned long kaddr,
-			       unsigned long vaddr, int len)
-{
-	pgd_t *pgd;
-	unsigned long end;
-	int ret = 0;
-
-	kaddr &= PAGE_MASK;
-	vaddr &= PAGE_MASK;
-
-	end = PAGE_ALIGN(vaddr + len);
-
-#ifdef DEBUG
-	printk("dvma: mapping kern %08lx to virt %08lx\n",
-	       kaddr, vaddr);
-#endif
-	pgd = pgd_offset_k(vaddr);
-
-	do {
-		pmd_t *pmd;
-		unsigned long end2;
-
-		if((pmd = pmd_alloc(&init_mm, pgd, vaddr)) == NULL) {
-			ret = -ENOMEM;
-			goto out;
-		}
-
-		if((end & PGDIR_MASK) > (vaddr & PGDIR_MASK))
-			end2 = (vaddr + (PGDIR_SIZE-1)) & PGDIR_MASK;
-		else
-			end2 = end;
-
-		do {
-			pte_t *pte;
-			unsigned long end3;
-
-			if((pte = pte_alloc_kernel(pmd, vaddr)) == NULL) {
-				ret = -ENOMEM;
-				goto out;
-			}
-
-			if((end2 & PMD_MASK) > (vaddr & PMD_MASK))
-				end3 = (vaddr + (PMD_SIZE-1)) & PMD_MASK;
-			else
-				end3 = end2;
-
-			do {
-#ifdef DEBUG
-				printk("mapping %08lx phys to %08lx\n",
-				       __pa(kaddr), vaddr);
-#endif
-				set_pte(pte, pfn_pte(virt_to_pfn(kaddr),
-						     PAGE_KERNEL));
-				pte++;
-				kaddr += PAGE_SIZE;
-				vaddr += PAGE_SIZE;
-			} while(vaddr < end3);
-
-		} while(vaddr < end2);
-
-	} while(vaddr < end);
-
-	flush_tlb_all();
-
- out:
-	return ret;
-}
-
-
-inline int dvma_map_iommu(unsigned long kaddr, unsigned long baddr,
-				 int len)
-{
-	unsigned long end, index;
-
-	index = baddr >> DVMA_PAGE_SHIFT;
-	end = ((baddr+len) >> DVMA_PAGE_SHIFT);
-
-	if(len & ~DVMA_PAGE_MASK)
-		end++;
-
-	for(; index < end ; index++) {
-//		if(dvma_entry_use(index))
-//			BUG();
-//		printk("mapping pa %lx to ba %lx\n", __pa(kaddr), index << DVMA_PAGE_SHIFT);
-
-		dvma_entry_set(index, __pa(kaddr));
-
-		iommu_pte[index] |= IOMMU_FULL_BLOCK;
-//		dvma_entry_inc(index);
-
-		kaddr += DVMA_PAGE_SIZE;
-	}
-
-#ifdef DEBUG
-	for(index = (baddr >> DVMA_PAGE_SHIFT); index < end; index++)
-		dvma_print(index << DVMA_PAGE_SHIFT);
-#endif
-	return 0;
-
-}
-
-void dvma_unmap_iommu(unsigned long baddr, int len)
-{
-
-	int index, end;
-
-
-	index = baddr >> DVMA_PAGE_SHIFT;
-	end = (DVMA_PAGE_ALIGN(baddr+len) >> DVMA_PAGE_SHIFT);
-
-	for(; index < end ; index++) {
-#ifdef DEBUG
-		printk("freeing bus mapping %08x\n", index << DVMA_PAGE_SHIFT);
-#endif
-#if 0
-		if(!dvma_entry_use(index))
-			printk("dvma_unmap freeing unused entry %04x\n",
-			       index);
-		else
-			dvma_entry_dec(index);
-#endif
-		dvma_entry_clr(index);
-	}
-
-}
-
diff --git a/ANDROID_3.4.5/arch/m68k/sun3x/prom.c b/ANDROID_3.4.5/arch/m68k/sun3x/prom.c
deleted file mode 100644
index a7b7e818..00000000
--- a/ANDROID_3.4.5/arch/m68k/sun3x/prom.c
+++ /dev/null
@@ -1,166 +0,0 @@
-/* Prom access routines for the sun3x */
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/tty.h>
-#include <linux/console.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/string.h>
-
-#include <asm/page.h>
-#include <asm/pgtable.h>
-#include <asm/bootinfo.h>
-#include <asm/setup.h>
-#include <asm/traps.h>
-#include <asm/sun3xprom.h>
-#include <asm/idprom.h>
-#include <asm/segment.h>
-#include <asm/sun3ints.h>
-#include <asm/openprom.h>
-#include <asm/machines.h>
-
-void (*sun3x_putchar)(int);
-int (*sun3x_getchar)(void);
-int (*sun3x_mayget)(void);
-int (*sun3x_mayput)(int);
-void (*sun3x_prom_reboot)(void);
-e_vector sun3x_prom_abort;
-struct linux_romvec *romvec;
-
-/* prom vector table */
-e_vector *sun3x_prom_vbr;
-
-/* Handle returning to the prom */
-void sun3x_halt(void)
-{
-	unsigned long flags;
-
-	/* Disable interrupts while we mess with things */
-	local_irq_save(flags);
-
-	/* Restore prom vbr */
-	asm volatile ("movec %0,%%vbr" : : "r" ((void*)sun3x_prom_vbr));
-
-	/* Restore prom NMI clock */
-//	sun3x_disable_intreg(5);
-	sun3_enable_irq(7);
-
-	/* Let 'er rip */
-	asm volatile ("trap #14");
-
-	/* Restore everything */
-	sun3_disable_irq(7);
-	sun3_enable_irq(5);
-
-	asm volatile ("movec %0,%%vbr" : : "r" ((void*)vectors));
-	local_irq_restore(flags);
-}
-
-void sun3x_reboot(void)
-{
-	/* This never returns, don't bother saving things */
-	local_irq_disable();
-
-	/* Restore prom vbr */
-	asm volatile ("movec %0,%%vbr" : : "r" ((void*)sun3x_prom_vbr));
-
-	/* Restore prom NMI clock */
-	sun3_disable_irq(5);
-	sun3_enable_irq(7);
-
-	/* Let 'er rip */
-	(*romvec->pv_reboot)("vmlinux");
-}
-
-static void sun3x_prom_write(struct console *co, const char *s,
-                             unsigned int count)
-{
-	while (count--) {
-		if (*s == '\n')
-			sun3x_putchar('\r');
-		sun3x_putchar(*s++);
-	}
-}
-
-/* debug console - write-only */
-
-static struct console sun3x_debug = {
-	.name	= "debug",
-	.write	= sun3x_prom_write,
-	.flags	= CON_PRINTBUFFER,
-	.index	= -1,
-};
-
-void __init sun3x_prom_init(void)
-{
-	/* Read the vector table */
-
-	sun3x_putchar = *(void (**)(int)) (SUN3X_P_PUTCHAR);
-	sun3x_getchar = *(int (**)(void)) (SUN3X_P_GETCHAR);
-	sun3x_mayget = *(int (**)(void))  (SUN3X_P_MAYGET);
-	sun3x_mayput = *(int (**)(int))   (SUN3X_P_MAYPUT);
-	sun3x_prom_reboot = *(void (**)(void)) (SUN3X_P_REBOOT);
-	sun3x_prom_abort = *(e_vector *)  (SUN3X_P_ABORT);
-	romvec = (struct linux_romvec *)SUN3X_PROM_BASE;
-
-	idprom_init();
-
-	if (!((idprom->id_machtype & SM_ARCH_MASK) == SM_SUN3X)) {
-		printk("Warning: machine reports strange type %02x\n",
-			idprom->id_machtype);
-		printk("Pretending it's a 3/80, but very afraid...\n");
-		idprom->id_machtype = SM_SUN3X | SM_3_80;
-	}
-
-	/* point trap #14 at abort.
-	 * XXX this is futile since we restore the vbr first - oops
-	 */
-	vectors[VEC_TRAP14] = sun3x_prom_abort;
-}
-
-static int __init sun3x_debug_setup(char *arg)
-{
-	/* If debug=prom was specified, start the debug console */
-	if (MACH_IS_SUN3X && !strcmp(arg, "prom"))
-		register_console(&sun3x_debug);
-	return 0;
-}
-
-early_param("debug", sun3x_debug_setup);
-
-/* some prom functions to export */
-int prom_getintdefault(int node, char *property, int deflt)
-{
-	return deflt;
-}
-
-int prom_getbool (int node, char *prop)
-{
-	return 1;
-}
-
-void prom_printf(char *fmt, ...)
-{
-}
-
-void prom_halt (void)
-{
-	sun3x_halt();
-}
-
-/* Get the idprom and stuff it into buffer 'idbuf'.  Returns the
- * format type.  'num_bytes' is the number of bytes that your idbuf
- * has space for.  Returns 0xff on error.
- */
-unsigned char
-prom_get_idprom(char *idbuf, int num_bytes)
-{
-        int i;
-
-	/* make a copy of the idprom structure */
-	for (i = 0; i < num_bytes; i++)
-		idbuf[i] = ((char *)SUN3X_IDPROM)[i];
-
-        return idbuf[0];
-}
diff --git a/ANDROID_3.4.5/arch/m68k/sun3x/time.c b/ANDROID_3.4.5/arch/m68k/sun3x/time.c
deleted file mode 100644
index 1d0a7248..00000000
--- a/ANDROID_3.4.5/arch/m68k/sun3x/time.c
+++ /dev/null
@@ -1,102 +0,0 @@
-/*
- *  linux/arch/m68k/sun3x/time.c
- *
- *  Sun3x-specific time handling
- */
-
-#include <linux/types.h>
-#include <linux/kd.h>
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/kernel_stat.h>
-#include <linux/interrupt.h>
-#include <linux/rtc.h>
-#include <linux/bcd.h>
-
-#include <asm/irq.h>
-#include <asm/io.h>
-#include <asm/traps.h>
-#include <asm/sun3x.h>
-#include <asm/sun3ints.h>
-#include <asm/rtc.h>
-
-#include "time.h"
-
-#define M_CONTROL 0xf8
-#define M_SEC     0xf9
-#define M_MIN     0xfa
-#define M_HOUR    0xfb
-#define M_DAY     0xfc
-#define M_DATE    0xfd
-#define M_MONTH   0xfe
-#define M_YEAR    0xff
-
-#define C_WRITE   0x80
-#define C_READ    0x40
-#define C_SIGN    0x20
-#define C_CALIB   0x1f
-
-int sun3x_hwclk(int set, struct rtc_time *t)
-{
-	volatile struct mostek_dt *h =
-		(struct mostek_dt *)(SUN3X_EEPROM+M_CONTROL);
-	unsigned long flags;
-
-	local_irq_save(flags);
-
-	if(set) {
-		h->csr |= C_WRITE;
-		h->sec = bin2bcd(t->tm_sec);
-		h->min = bin2bcd(t->tm_min);
-		h->hour = bin2bcd(t->tm_hour);
-		h->wday = bin2bcd(t->tm_wday);
-		h->mday = bin2bcd(t->tm_mday);
-		h->month = bin2bcd(t->tm_mon);
-		h->year = bin2bcd(t->tm_year);
-		h->csr &= ~C_WRITE;
-	} else {
-		h->csr |= C_READ;
-		t->tm_sec = bcd2bin(h->sec);
-		t->tm_min = bcd2bin(h->min);
-		t->tm_hour = bcd2bin(h->hour);
-		t->tm_wday = bcd2bin(h->wday);
-		t->tm_mday = bcd2bin(h->mday);
-		t->tm_mon = bcd2bin(h->month);
-		t->tm_year = bcd2bin(h->year);
-		h->csr &= ~C_READ;
-	}
-
-	local_irq_restore(flags);
-
-	return 0;
-}
-/* Not much we can do here */
-unsigned long sun3x_gettimeoffset (void)
-{
-    return 0L;
-}
-
-#if 0
-static void sun3x_timer_tick(int irq, void *dev_id, struct pt_regs *regs)
-{
-    void (*vector)(int, void *, struct pt_regs *) = dev_id;
-
-    /* Clear the pending interrupt - pulse the enable line low */
-    disable_irq(5);
-    enable_irq(5);
-
-    vector(irq, NULL, regs);
-}
-#endif
-
-void __init sun3x_sched_init(irq_handler_t vector)
-{
-
-	sun3_disable_interrupts();
-
-
-    /* Pulse enable low to get the clock started */
-	sun3_disable_irq(5);
-	sun3_enable_irq(5);
-	sun3_enable_interrupts();
-}
diff --git a/ANDROID_3.4.5/arch/m68k/sun3x/time.h b/ANDROID_3.4.5/arch/m68k/sun3x/time.h
deleted file mode 100644
index 6909e129..00000000
--- a/ANDROID_3.4.5/arch/m68k/sun3x/time.h
+++ /dev/null
@@ -1,19 +0,0 @@
-#ifndef SUN3X_TIME_H
-#define SUN3X_TIME_H
-
-extern int sun3x_hwclk(int set, struct rtc_time *t);
-unsigned long sun3x_gettimeoffset (void);
-void sun3x_sched_init(irq_handler_t vector);
-
-struct mostek_dt {
-	volatile unsigned char csr;
-	volatile unsigned char sec;
-	volatile unsigned char min;
-	volatile unsigned char hour;
-	volatile unsigned char wday;
-	volatile unsigned char mday;
-	volatile unsigned char month;
-	volatile unsigned char year;
-};
-
-#endif
diff --git a/ANDROID_3.4.5/arch/m68k/tools/amiga/Makefile b/ANDROID_3.4.5/arch/m68k/tools/amiga/Makefile
deleted file mode 100644
index 11343613..00000000
--- a/ANDROID_3.4.5/arch/m68k/tools/amiga/Makefile
+++ /dev/null
@@ -1,11 +0,0 @@
-
-CC =		m68k-cbm-amigados-gcc
-CFLAGS =	-Wall -O2
-
-
-All:		dmesg
-
-
-dmesg:		dmesg.c
-		$(CC) $(CFLAGS) -o dmesg dmesg.c -noixemul
-
diff --git a/ANDROID_3.4.5/arch/m68k/tools/amiga/dmesg.c b/ANDROID_3.4.5/arch/m68k/tools/amiga/dmesg.c
deleted file mode 100644
index 7340f5b6..00000000
--- a/ANDROID_3.4.5/arch/m68k/tools/amiga/dmesg.c
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- *  linux/arch/m68k/tools/amiga/dmesg.c -- Retrieve the kernel messages stored
- *					   in Chip RAM with the kernel command
- *					   line option `debug=mem'.
- *
- *  © Copyright 1996 by Geert Uytterhoeven <geert@linux-m68k.org>
- *
- *
- *  Usage:
- *
- *	dmesg
- *	dmesg <CHIPMEM_END>
- *
- *
- *  This file is subject to the terms and conditions of the GNU General Public
- *  License.  See the file COPYING in the main directory of the Linux
- *  distribution for more details.
- */
-
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <unistd.h>
-
-
-#define CHIPMEM_START	0x00000000
-#define CHIPMEM_END	0x00200000	/* overridden by argv[1] */
-
-#define SAVEKMSG_MAGIC1	0x53415645	/* 'SAVE' */
-#define SAVEKMSG_MAGIC2	0x4B4D5347	/* 'KMSG' */
-
-struct savekmsg {
-    u_long magic1;	/* SAVEKMSG_MAGIC1 */
-    u_long magic2;	/* SAVEKMSG_MAGIC2 */
-    u_long magicptr;	/* address of magic1 */
-    u_long size;
-    char data[0];
-};
-
-
-int main(int argc, char *argv[])
-{
-    u_long start = CHIPMEM_START, end = CHIPMEM_END, p;
-    int found = 0;
-    struct savekmsg *m = NULL;
-
-    if (argc >= 2)
-	end = strtoul(argv[1], NULL, 0);
-    printf("Searching for SAVEKMSG magic...\n");
-    for (p = start; p <= end-sizeof(struct savekmsg); p += 4) {
-	m = (struct savekmsg *)p;
-	if ((m->magic1 == SAVEKMSG_MAGIC1) && (m->magic2 == SAVEKMSG_MAGIC2) &&
-	    (m->magicptr == p)) {
-	    found = 1;
-	    break;
-	}
-    }
-    if (!found)
-	printf("Not found\n");
-    else {
-	printf("Found %ld bytes at 0x%08lx\n", m->size, (u_long)&m->data);
-	puts(">>>>>>>>>>>>>>>>>>>>");
-	fflush(stdout);
-	write(1, &m->data, m->size);
-	fflush(stdout);
-	puts("<<<<<<<<<<<<<<<<<<<<");
-    }
-    return(0);
-}