diff options
Diffstat (limited to 'ANDROID_3.4.5/arch/m68k/include/asm/gpio.h')
| -rw-r--r-- | ANDROID_3.4.5/arch/m68k/include/asm/gpio.h | 244 |
1 files changed, 0 insertions, 244 deletions
diff --git a/ANDROID_3.4.5/arch/m68k/include/asm/gpio.h b/ANDROID_3.4.5/arch/m68k/include/asm/gpio.h deleted file mode 100644 index 00d0071d..00000000 --- a/ANDROID_3.4.5/arch/m68k/include/asm/gpio.h +++ /dev/null @@ -1,244 +0,0 @@ -/* - * Coldfire generic GPIO support - * - * (C) Copyright 2009, Steven King <sfking@fdwdc.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. -*/ - -#ifndef coldfire_gpio_h -#define coldfire_gpio_h - -#include <linux/io.h> -#include <asm-generic/gpio.h> -#include <asm/coldfire.h> -#include <asm/mcfsim.h> - -/* - * The Freescale Coldfire family is quite varied in how they implement GPIO. - * Some parts have 8 bit ports, some have 16bit and some have 32bit; some have - * only one port, others have multiple ports; some have a single data latch - * for both input and output, others have a separate pin data register to read - * input; some require a read-modify-write access to change an output, others - * have set and clear registers for some of the outputs; Some have all the - * GPIOs in a single control area, others have some GPIOs implemented in - * different modules. - * - * This implementation attempts accommodate the differences while presenting - * a generic interface that will optimize to as few instructions as possible. - */ -#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || \ - defined(CONFIG_M520x) || defined(CONFIG_M523x) || \ - defined(CONFIG_M527x) || defined(CONFIG_M528x) || \ - defined(CONFIG_M532x) || defined(CONFIG_M54xx) - -/* These parts have GPIO organized by 8 bit ports */ - -#define MCFGPIO_PORTTYPE u8 -#define MCFGPIO_PORTSIZE 8 -#define mcfgpio_read(port) __raw_readb(port) -#define mcfgpio_write(data, port) __raw_writeb(data, port) - -#elif defined(CONFIG_M5307) || defined(CONFIG_M5407) || defined(CONFIG_M5272) - -/* These parts have GPIO organized by 16 bit ports */ - -#define MCFGPIO_PORTTYPE u16 -#define MCFGPIO_PORTSIZE 16 -#define mcfgpio_read(port) __raw_readw(port) -#define mcfgpio_write(data, port) __raw_writew(data, port) - -#elif defined(CONFIG_M5249) - -/* These parts have GPIO organized by 32 bit ports */ - -#define MCFGPIO_PORTTYPE u32 -#define MCFGPIO_PORTSIZE 32 -#define mcfgpio_read(port) __raw_readl(port) -#define mcfgpio_write(data, port) __raw_writel(data, port) - -#endif - -#define mcfgpio_bit(gpio) (1 << ((gpio) % MCFGPIO_PORTSIZE)) -#define mcfgpio_port(gpio) ((gpio) / MCFGPIO_PORTSIZE) - -#if defined(CONFIG_M520x) || defined(CONFIG_M523x) || \ - defined(CONFIG_M527x) || defined(CONFIG_M528x) || defined(CONFIG_M532x) -/* - * These parts have an 'Edge' Port module (external interrupt/GPIO) which uses - * read-modify-write to change an output and a GPIO module which has separate - * set/clr registers to directly change outputs with a single write access. - */ -#if defined(CONFIG_M528x) -/* - * The 528x also has GPIOs in other modules (GPT, QADC) which use - * read-modify-write as well as those controlled by the EPORT and GPIO modules. - */ -#define MCFGPIO_SCR_START 40 -#else -#define MCFGPIO_SCR_START 8 -#endif - -#define MCFGPIO_SETR_PORT(gpio) (MCFGPIO_SETR + \ - mcfgpio_port(gpio - MCFGPIO_SCR_START)) - -#define MCFGPIO_CLRR_PORT(gpio) (MCFGPIO_CLRR + \ - mcfgpio_port(gpio - MCFGPIO_SCR_START)) -#else - -#define MCFGPIO_SCR_START MCFGPIO_PIN_MAX -/* with MCFGPIO_SCR == MCFGPIO_PIN_MAX, these will be optimized away */ -#define MCFGPIO_SETR_PORT(gpio) 0 -#define MCFGPIO_CLRR_PORT(gpio) 0 - -#endif -/* - * Coldfire specific helper functions - */ - -/* return the port pin data register for a gpio */ -static inline u32 __mcf_gpio_ppdr(unsigned gpio) -{ -#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || \ - defined(CONFIG_M5307) || defined(CONFIG_M5407) - return MCFSIM_PADAT; -#elif defined(CONFIG_M5272) - if (gpio < 16) - return MCFSIM_PADAT; - else if (gpio < 32) - return MCFSIM_PBDAT; - else - return MCFSIM_PCDAT; -#elif defined(CONFIG_M5249) - if (gpio < 32) - return MCFSIM2_GPIOREAD; - else - return MCFSIM2_GPIO1READ; -#elif defined(CONFIG_M520x) || defined(CONFIG_M523x) || \ - defined(CONFIG_M527x) || defined(CONFIG_M528x) || defined(CONFIG_M532x) - if (gpio < 8) - return MCFEPORT_EPPDR; -#if defined(CONFIG_M528x) - else if (gpio < 16) - return MCFGPTA_GPTPORT; - else if (gpio < 24) - return MCFGPTB_GPTPORT; - else if (gpio < 32) - return MCFQADC_PORTQA; - else if (gpio < 40) - return MCFQADC_PORTQB; -#endif - else - return MCFGPIO_PPDR + mcfgpio_port(gpio - MCFGPIO_SCR_START); -#else - return 0; -#endif -} - -/* return the port output data register for a gpio */ -static inline u32 __mcf_gpio_podr(unsigned gpio) -{ -#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || \ - defined(CONFIG_M5307) || defined(CONFIG_M5407) - return MCFSIM_PADAT; -#elif defined(CONFIG_M5272) - if (gpio < 16) - return MCFSIM_PADAT; - else if (gpio < 32) - return MCFSIM_PBDAT; - else - return MCFSIM_PCDAT; -#elif defined(CONFIG_M5249) - if (gpio < 32) - return MCFSIM2_GPIOWRITE; - else - return MCFSIM2_GPIO1WRITE; -#elif defined(CONFIG_M520x) || defined(CONFIG_M523x) || \ - defined(CONFIG_M527x) || defined(CONFIG_M528x) || defined(CONFIG_M532x) - if (gpio < 8) - return MCFEPORT_EPDR; -#if defined(CONFIG_M528x) - else if (gpio < 16) - return MCFGPTA_GPTPORT; - else if (gpio < 24) - return MCFGPTB_GPTPORT; - else if (gpio < 32) - return MCFQADC_PORTQA; - else if (gpio < 40) - return MCFQADC_PORTQB; -#endif - else - return MCFGPIO_PODR + mcfgpio_port(gpio - MCFGPIO_SCR_START); -#else - return 0; -#endif -} - -/* - * The Generic GPIO functions - * - * If the gpio is a compile time constant and is one of the Coldfire gpios, - * use the inline version, otherwise dispatch thru gpiolib. - */ - -static inline int gpio_get_value(unsigned gpio) -{ - if (__builtin_constant_p(gpio) && gpio < MCFGPIO_PIN_MAX) - return mcfgpio_read(__mcf_gpio_ppdr(gpio)) & mcfgpio_bit(gpio); - else - return __gpio_get_value(gpio); -} - -static inline void gpio_set_value(unsigned gpio, int value) -{ - if (__builtin_constant_p(gpio) && gpio < MCFGPIO_PIN_MAX) { - if (gpio < MCFGPIO_SCR_START) { - unsigned long flags; - MCFGPIO_PORTTYPE data; - - local_irq_save(flags); - data = mcfgpio_read(__mcf_gpio_podr(gpio)); - if (value) - data |= mcfgpio_bit(gpio); - else - data &= ~mcfgpio_bit(gpio); - mcfgpio_write(data, __mcf_gpio_podr(gpio)); - local_irq_restore(flags); - } else { - if (value) - mcfgpio_write(mcfgpio_bit(gpio), - MCFGPIO_SETR_PORT(gpio)); - else - mcfgpio_write(~mcfgpio_bit(gpio), - MCFGPIO_CLRR_PORT(gpio)); - } - } else - __gpio_set_value(gpio, value); -} - -static inline int gpio_to_irq(unsigned gpio) -{ - return (gpio < MCFGPIO_IRQ_MAX) ? gpio + MCFGPIO_IRQ_VECBASE - : __gpio_to_irq(gpio); -} - -static inline int irq_to_gpio(unsigned irq) -{ - return (irq >= MCFGPIO_IRQ_VECBASE && - irq < (MCFGPIO_IRQ_VECBASE + MCFGPIO_IRQ_MAX)) ? - irq - MCFGPIO_IRQ_VECBASE : -ENXIO; -} - -static inline int gpio_cansleep(unsigned gpio) -{ - return gpio < MCFGPIO_PIN_MAX ? 0 : __gpio_cansleep(gpio); -} - -#endif |