diff options
Diffstat (limited to 'ANDROID_3.4.5/arch/m68k/fpsp040/fpsp.h')
| -rw-r--r-- | ANDROID_3.4.5/arch/m68k/fpsp040/fpsp.h | 347 |
1 files changed, 0 insertions, 347 deletions
diff --git a/ANDROID_3.4.5/arch/m68k/fpsp040/fpsp.h b/ANDROID_3.4.5/arch/m68k/fpsp040/fpsp.h deleted file mode 100644 index 5df4cd77..00000000 --- a/ANDROID_3.4.5/arch/m68k/fpsp040/fpsp.h +++ /dev/null @@ -1,347 +0,0 @@ -| -| fpsp.h 3.3 3.3 -| - -| Copyright (C) Motorola, Inc. 1990 -| All Rights Reserved -| -| For details on the license for this file, please see the -| file, README, in this same directory. - -| fpsp.h --- stack frame offsets during FPSP exception handling -| -| These equates are used to access the exception frame, the fsave -| frame and any local variables needed by the FPSP package. -| -| All FPSP handlers begin by executing: -| -| link a6,#-LOCAL_SIZE -| fsave -(a7) -| movem.l d0-d1/a0-a1,USER_DA(a6) -| fmovem.x fp0-fp3,USER_FP0(a6) -| fmove.l fpsr/fpcr/fpiar,USER_FPSR(a6) -| -| After initialization, the stack looks like this: -| -| A7 ---> +-------------------------------+ -| | | -| | FPU fsave area | -| | | -| +-------------------------------+ -| | | -| | FPSP Local Variables | -| | including | -| | saved registers | -| | | -| +-------------------------------+ -| A6 ---> | Saved A6 | -| +-------------------------------+ -| | | -| | Exception Frame | -| | | -| | | -| -| Positive offsets from A6 refer to the exception frame. Negative -| offsets refer to the Local Variable area and the fsave area. -| The fsave frame is also accessible from the top via A7. -| -| On exit, the handlers execute: -| -| movem.l USER_DA(a6),d0-d1/a0-a1 -| fmovem.x USER_FP0(a6),fp0-fp3 -| fmove.l USER_FPSR(a6),fpsr/fpcr/fpiar -| frestore (a7)+ -| unlk a6 -| -| and then either "bra fpsp_done" if the exception was completely -| handled by the package, or "bra real_xxxx" which is an external -| label to a routine that will process a real exception of the -| type that was generated. Some handlers may omit the "frestore" -| if the FPU state after the exception is idle. -| -| Sometimes the exception handler will transform the fsave area -| because it needs to report an exception back to the user. This -| can happen if the package is entered for an unimplemented float -| instruction that generates (say) an underflow. Alternatively, -| a second fsave frame can be pushed onto the stack and the -| handler exit code will reload the new frame and discard the old. -| -| The registers d0, d1, a0, a1 and fp0-fp3 are always saved and -| restored from the "local variable" area and can be used as -| temporaries. If a routine needs to change any -| of these registers, it should modify the saved copy and let -| the handler exit code restore the value. -| -|---------------------------------------------------------------------- -| -| Local Variables on the stack -| - .set LOCAL_SIZE,192 | bytes needed for local variables - .set LV,-LOCAL_SIZE | convenient base value -| - .set USER_DA,LV+0 | save space for D0-D1,A0-A1 - .set USER_D0,LV+0 | saved user D0 - .set USER_D1,LV+4 | saved user D1 - .set USER_A0,LV+8 | saved user A0 - .set USER_A1,LV+12 | saved user A1 - .set USER_FP0,LV+16 | saved user FP0 - .set USER_FP1,LV+28 | saved user FP1 - .set USER_FP2,LV+40 | saved user FP2 - .set USER_FP3,LV+52 | saved user FP3 - .set USER_FPCR,LV+64 | saved user FPCR - .set FPCR_ENABLE,USER_FPCR+2 | FPCR exception enable - .set FPCR_MODE,USER_FPCR+3 | FPCR rounding mode control - .set USER_FPSR,LV+68 | saved user FPSR - .set FPSR_CC,USER_FPSR+0 | FPSR condition code - .set FPSR_QBYTE,USER_FPSR+1 | FPSR quotient - .set FPSR_EXCEPT,USER_FPSR+2 | FPSR exception - .set FPSR_AEXCEPT,USER_FPSR+3 | FPSR accrued exception - .set USER_FPIAR,LV+72 | saved user FPIAR - .set FP_SCR1,LV+76 | room for a temporary float value - .set FP_SCR2,LV+92 | room for a temporary float value - .set L_SCR1,LV+108 | room for a temporary long value - .set L_SCR2,LV+112 | room for a temporary long value - .set STORE_FLG,LV+116 - .set BINDEC_FLG,LV+117 | used in bindec - .set DNRM_FLG,LV+118 | used in res_func - .set RES_FLG,LV+119 | used in res_func - .set DY_MO_FLG,LV+120 | dyadic/monadic flag - .set UFLG_TMP,LV+121 | temporary for uflag errata - .set CU_ONLY,LV+122 | cu-only flag - .set VER_TMP,LV+123 | temp holding for version number - .set L_SCR3,LV+124 | room for a temporary long value - .set FP_SCR3,LV+128 | room for a temporary float value - .set FP_SCR4,LV+144 | room for a temporary float value - .set FP_SCR5,LV+160 | room for a temporary float value - .set FP_SCR6,LV+176 -| -|NEXT equ LV+192 ;need to increase LOCAL_SIZE -| -|-------------------------------------------------------------------------- -| -| fsave offsets and bit definitions -| -| Offsets are defined from the end of an fsave because the last 10 -| words of a busy frame are the same as the unimplemented frame. -| - .set CU_SAVEPC,LV-92 | micro-pc for CU (1 byte) - .set FPR_DIRTY_BITS,LV-91 | fpr dirty bits -| - .set WBTEMP,LV-76 | write back temp (12 bytes) - .set WBTEMP_EX,WBTEMP | wbtemp sign and exponent (2 bytes) - .set WBTEMP_HI,WBTEMP+4 | wbtemp mantissa [63:32] (4 bytes) - .set WBTEMP_LO,WBTEMP+8 | wbtemp mantissa [31:00] (4 bytes) -| - .set WBTEMP_SGN,WBTEMP+2 | used to store sign -| - .set FPSR_SHADOW,LV-64 | fpsr shadow reg -| - .set FPIARCU,LV-60 | Instr. addr. reg. for CU (4 bytes) -| - .set CMDREG2B,LV-52 | cmd reg for machine 2 - .set CMDREG3B,LV-48 | cmd reg for E3 exceptions (2 bytes) -| - .set NMNEXC,LV-44 | NMNEXC (unsup,snan bits only) - .set nmn_unsup_bit,1 | - .set nmn_snan_bit,0 | -| - .set NMCEXC,LV-43 | NMNEXC & NMCEXC - .set nmn_operr_bit,7 - .set nmn_ovfl_bit,6 - .set nmn_unfl_bit,5 - .set nmc_unsup_bit,4 - .set nmc_snan_bit,3 - .set nmc_operr_bit,2 - .set nmc_ovfl_bit,1 - .set nmc_unfl_bit,0 -| - .set STAG,LV-40 | source tag (1 byte) - .set WBTEMP_GRS,LV-40 | alias wbtemp guard, round, sticky - .set guard_bit,1 | guard bit is bit number 1 - .set round_bit,0 | round bit is bit number 0 - .set stag_mask,0xE0 | upper 3 bits are source tag type - .set denorm_bit,7 | bit determines if denorm or unnorm - .set etemp15_bit,4 | etemp exponent bit #15 - .set wbtemp66_bit,2 | wbtemp mantissa bit #66 - .set wbtemp1_bit,1 | wbtemp mantissa bit #1 - .set wbtemp0_bit,0 | wbtemp mantissa bit #0 -| - .set STICKY,LV-39 | holds sticky bit - .set sticky_bit,7 -| - .set CMDREG1B,LV-36 | cmd reg for E1 exceptions (2 bytes) - .set kfact_bit,12 | distinguishes static/dynamic k-factor -| ;on packed move outs. NOTE: this -| ;equate only works when CMDREG1B is in -| ;a register. -| - .set CMDWORD,LV-35 | command word in cmd1b - .set direction_bit,5 | bit 0 in opclass - .set size_bit2,12 | bit 2 in size field -| - .set DTAG,LV-32 | dest tag (1 byte) - .set dtag_mask,0xE0 | upper 3 bits are dest type tag - .set fptemp15_bit,4 | fptemp exponent bit #15 -| - .set WB_BYTE,LV-31 | holds WBTE15 bit (1 byte) - .set wbtemp15_bit,4 | wbtemp exponent bit #15 -| - .set E_BYTE,LV-28 | holds E1 and E3 bits (1 byte) - .set E1,2 | which bit is E1 flag - .set E3,1 | which bit is E3 flag - .set SFLAG,0 | which bit is S flag -| - .set T_BYTE,LV-27 | holds T and U bits (1 byte) - .set XFLAG,7 | which bit is X flag - .set UFLAG,5 | which bit is U flag - .set TFLAG,4 | which bit is T flag -| - .set FPTEMP,LV-24 | fptemp (12 bytes) - .set FPTEMP_EX,FPTEMP | fptemp sign and exponent (2 bytes) - .set FPTEMP_HI,FPTEMP+4 | fptemp mantissa [63:32] (4 bytes) - .set FPTEMP_LO,FPTEMP+8 | fptemp mantissa [31:00] (4 bytes) -| - .set FPTEMP_SGN,FPTEMP+2 | used to store sign -| - .set ETEMP,LV-12 | etemp (12 bytes) - .set ETEMP_EX,ETEMP | etemp sign and exponent (2 bytes) - .set ETEMP_HI,ETEMP+4 | etemp mantissa [63:32] (4 bytes) - .set ETEMP_LO,ETEMP+8 | etemp mantissa [31:00] (4 bytes) -| - .set ETEMP_SGN,ETEMP+2 | used to store sign -| - .set EXC_SR,4 | exception frame status register - .set EXC_PC,6 | exception frame program counter - .set EXC_VEC,10 | exception frame vector (format+vector#) - .set EXC_EA,12 | exception frame effective address -| -|-------------------------------------------------------------------------- -| -| FPSR/FPCR bits -| - .set neg_bit,3 | negative result - .set z_bit,2 | zero result - .set inf_bit,1 | infinity result - .set nan_bit,0 | not-a-number result -| - .set q_sn_bit,7 | sign bit of quotient byte -| - .set bsun_bit,7 | branch on unordered - .set snan_bit,6 | signalling nan - .set operr_bit,5 | operand error - .set ovfl_bit,4 | overflow - .set unfl_bit,3 | underflow - .set dz_bit,2 | divide by zero - .set inex2_bit,1 | inexact result 2 - .set inex1_bit,0 | inexact result 1 -| - .set aiop_bit,7 | accrued illegal operation - .set aovfl_bit,6 | accrued overflow - .set aunfl_bit,5 | accrued underflow - .set adz_bit,4 | accrued divide by zero - .set ainex_bit,3 | accrued inexact -| -| FPSR individual bit masks -| - .set neg_mask,0x08000000 - .set z_mask,0x04000000 - .set inf_mask,0x02000000 - .set nan_mask,0x01000000 -| - .set bsun_mask,0x00008000 | - .set snan_mask,0x00004000 - .set operr_mask,0x00002000 - .set ovfl_mask,0x00001000 - .set unfl_mask,0x00000800 - .set dz_mask,0x00000400 - .set inex2_mask,0x00000200 - .set inex1_mask,0x00000100 -| - .set aiop_mask,0x00000080 | accrued illegal operation - .set aovfl_mask,0x00000040 | accrued overflow - .set aunfl_mask,0x00000020 | accrued underflow - .set adz_mask,0x00000010 | accrued divide by zero - .set ainex_mask,0x00000008 | accrued inexact -| -| FPSR combinations used in the FPSP -| - .set dzinf_mask,inf_mask+dz_mask+adz_mask - .set opnan_mask,nan_mask+operr_mask+aiop_mask - .set nzi_mask,0x01ffffff | clears N, Z, and I - .set unfinx_mask,unfl_mask+inex2_mask+aunfl_mask+ainex_mask - .set unf2inx_mask,unfl_mask+inex2_mask+ainex_mask - .set ovfinx_mask,ovfl_mask+inex2_mask+aovfl_mask+ainex_mask - .set inx1a_mask,inex1_mask+ainex_mask - .set inx2a_mask,inex2_mask+ainex_mask - .set snaniop_mask,nan_mask+snan_mask+aiop_mask - .set naniop_mask,nan_mask+aiop_mask - .set neginf_mask,neg_mask+inf_mask - .set infaiop_mask,inf_mask+aiop_mask - .set negz_mask,neg_mask+z_mask - .set opaop_mask,operr_mask+aiop_mask - .set unfl_inx_mask,unfl_mask+aunfl_mask+ainex_mask - .set ovfl_inx_mask,ovfl_mask+aovfl_mask+ainex_mask -| -|-------------------------------------------------------------------------- -| -| FPCR rounding modes -| - .set x_mode,0x00 | round to extended - .set s_mode,0x40 | round to single - .set d_mode,0x80 | round to double -| - .set rn_mode,0x00 | round nearest - .set rz_mode,0x10 | round to zero - .set rm_mode,0x20 | round to minus infinity - .set rp_mode,0x30 | round to plus infinity -| -|-------------------------------------------------------------------------- -| -| Miscellaneous equates -| - .set signan_bit,6 | signalling nan bit in mantissa - .set sign_bit,7 -| - .set rnd_stky_bit,29 | round/sticky bit of mantissa -| this can only be used if in a data register - .set sx_mask,0x01800000 | set s and x bits in word $48 -| - .set LOCAL_EX,0 - .set LOCAL_SGN,2 - .set LOCAL_HI,4 - .set LOCAL_LO,8 - .set LOCAL_GRS,12 | valid ONLY for FP_SCR1, FP_SCR2 -| -| - .set norm_tag,0x00 | tag bits in {7:5} position - .set zero_tag,0x20 - .set inf_tag,0x40 - .set nan_tag,0x60 - .set dnrm_tag,0x80 -| -| fsave sizes and formats -| - .set VER_4,0x40 | fpsp compatible version numbers -| are in the $40s {$40-$4f} - .set VER_40,0x40 | original version number - .set VER_41,0x41 | revision version number -| - .set BUSY_SIZE,100 | size of busy frame - .set BUSY_FRAME,LV-BUSY_SIZE | start of busy frame -| - .set UNIMP_40_SIZE,44 | size of orig unimp frame - .set UNIMP_41_SIZE,52 | size of rev unimp frame -| - .set IDLE_SIZE,4 | size of idle frame - .set IDLE_FRAME,LV-IDLE_SIZE | start of idle frame -| -| exception vectors -| - .set TRACE_VEC,0x2024 | trace trap - .set FLINE_VEC,0x002C | real F-line - .set UNIMP_VEC,0x202C | unimplemented - .set INEX_VEC,0x00C4 -| - .set dbl_thresh,0x3C01 - .set sgl_thresh,0x3F81 -| |