1 files changed, 0 insertions, 160 deletions
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/init.c b/ANDROID_3.4.5/arch/arm/plat-samsung/init.c
deleted file mode 100644
index 79d10fca..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/init.c
+++ /dev/null
@@ -1,160 +0,0 @@
-/* linux/arch/arm/plat-s3c/init.c
- *
- * Copyright (c) 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * S3C series CPU initialisation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/serial_core.h>
-#include <linux/platform_device.h>
-
-#include <mach/hardware.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/clock.h>
-
-#include <plat/regs-serial.h>
-
-static struct cpu_table *cpu;
-
-static struct cpu_table * __init s3c_lookup_cpu(unsigned long idcode,
-						struct cpu_table *tab,
-						unsigned int count)
-{
-	for (; count != 0; count--, tab++) {
-		if ((idcode & tab->idmask) == (tab->idcode & tab->idmask))
-			return tab;
-	}
-
-	return NULL;
-}
-
-void __init s3c_init_cpu(unsigned long idcode,
-			 struct cpu_table *cputab, unsigned int cputab_size)
-{
-	cpu = s3c_lookup_cpu(idcode, cputab, cputab_size);
-
-	if (cpu == NULL) {
-		printk(KERN_ERR "Unknown CPU type 0x%08lx\n", idcode);
-		panic("Unknown S3C24XX CPU");
-	}
-
-	printk("CPU %s (id 0x%08lx)\n", cpu->name, idcode);
-
-	if (cpu->map_io == NULL || cpu->init == NULL) {
-		printk(KERN_ERR "CPU %s support not enabled\n", cpu->name);
-		panic("Unsupported Samsung CPU");
-	}
-
-	cpu->map_io();
-}
-
-/* s3c24xx_init_clocks
- *
- * Initialise the clock subsystem and associated information from the
- * given master crystal value.
- *
- * xtal  = 0 -> use default PLL crystal value (normally 12MHz)
- *      != 0 -> PLL crystal value in Hz
-*/
-
-void __init s3c24xx_init_clocks(int xtal)
-{
-	if (xtal == 0)
-		xtal = 12*1000*1000;
-
-	if (cpu == NULL)
-		panic("s3c24xx_init_clocks: no cpu setup?\n");
-
-	if (cpu->init_clocks == NULL)
-		panic("s3c24xx_init_clocks: cpu has no clock init\n");
-	else
-		(cpu->init_clocks)(xtal);
-}
-
-/* uart management */
-
-static int nr_uarts __initdata = 0;
-
-static struct s3c2410_uartcfg uart_cfgs[CONFIG_SERIAL_SAMSUNG_UARTS];
-
-/* s3c24xx_init_uartdevs
- *
- * copy the specified platform data and configuration into our central
- * set of devices, before the data is thrown away after the init process.
- *
- * This also fills in the array passed to the serial driver for the
- * early initialisation of the console.
-*/
-
-void __init s3c24xx_init_uartdevs(char *name,
-				  struct s3c24xx_uart_resources *res,
-				  struct s3c2410_uartcfg *cfg, int no)
-{
-	struct platform_device *platdev;
-	struct s3c2410_uartcfg *cfgptr = uart_cfgs;
-	struct s3c24xx_uart_resources *resp;
-	int uart;
-
-	memcpy(cfgptr, cfg, sizeof(struct s3c2410_uartcfg) * no);
-
-	for (uart = 0; uart < no; uart++, cfg++, cfgptr++) {
-		platdev = s3c24xx_uart_src[cfgptr->hwport];
-
-		resp = res + cfgptr->hwport;
-
-		s3c24xx_uart_devs[uart] = platdev;
-
-		platdev->name = name;
-		platdev->resource = resp->resources;
-		platdev->num_resources = resp->nr_resources;
-
-		platdev->dev.platform_data = cfgptr;
-	}
-
-	nr_uarts = no;
-}
-
-void __init s3c24xx_init_uarts(struct s3c2410_uartcfg *cfg, int no)
-{
-	if (cpu == NULL)
-		return;
-
-	if (cpu->init_uarts == NULL) {
-		printk(KERN_ERR "s3c24xx_init_uarts: cpu has no uart init\n");
-	} else
-		(cpu->init_uarts)(cfg, no);
-}
-
-static int __init s3c_arch_init(void)
-{
-	int ret;
-
-	// do the correct init for cpu
-
-	if (cpu == NULL)
-		panic("s3c_arch_init: NULL cpu\n");
-
-	ret = (cpu->init)();
-	if (ret != 0)
-		return ret;
-
-	ret = platform_add_devices(s3c24xx_uart_devs, nr_uarts);
-	return ret;
-}
-
-arch_initcall(s3c_arch_init);